Adding upstream version 6.6.15.upstream/6.6.15

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2348 files changed, 783180 insertions, 0 deletions

diff --git a/arch/arm64/Kbuild b/arch/arm64/Kbuild
new file mode 100644
index 000000000..5bfbf7d79
--- /dev/null
+++ b/arch/arm64/Kbuild
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= kernel/ mm/ net/
+obj-$(CONFIG_KVM)	+= kvm/
+obj-$(CONFIG_XEN)	+= xen/
+obj-$(subst m,y,$(CONFIG_HYPERV))	+= hyperv/
+obj-$(CONFIG_CRYPTO)	+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
new file mode 100644
index 000000000..b5df38c2a
--- /dev/null
+++ b/arch/arm64/Kconfig
@@ -0,0 +1,2336 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config ARM64
+	def_bool y
+	select ACPI_APMT if ACPI
+	select ACPI_CCA_REQUIRED if ACPI
+	select ACPI_GENERIC_GSI if ACPI
+	select ACPI_GTDT if ACPI
+	select ACPI_IORT if ACPI
+	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+	select ACPI_MCFG if (ACPI && PCI)
+	select ACPI_SPCR_TABLE if ACPI
+	select ACPI_PPTT if ACPI
+	select ARCH_HAS_DEBUG_WX
+	select ARCH_BINFMT_ELF_EXTRA_PHDRS
+	select ARCH_BINFMT_ELF_STATE
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
+	select ARCH_ENABLE_MEMORY_HOTPLUG
+	select ARCH_ENABLE_MEMORY_HOTREMOVE
+	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
+	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VM_PGTABLE
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
+	select ARCH_HAS_FAST_MULTIPLIER
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_GIGANTIC_PAGE
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_KEEPINITRD
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	select ARCH_HAS_PTE_DEVMAP
+	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SET_DIRECT_MAP
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
+	select ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_HAS_STRICT_MODULE_RWX
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYSCALL_WRAPPER
+	select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAS_ZONE_DMA_SET if EXPERT
+	select ARCH_HAVE_ELF_PROT
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_HAVE_TRACE_MMIO_ACCESS
+	select ARCH_INLINE_READ_LOCK if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_GNU_PROPERTY
+	select ARCH_USE_MEMTEST
+	select ARCH_USE_QUEUED_RWLOCKS
+	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_USE_SYM_ANNOTATIONS
+	select ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	select ARCH_SUPPORTS_HUGETLBFS
+	select ARCH_SUPPORTS_MEMORY_FAILURE
+	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
+	select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN
+	select ARCH_SUPPORTS_LTO_CLANG_THIN
+	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
+	select ARCH_SUPPORTS_NUMA_BALANCING
+	select ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	select ARCH_SUPPORTS_PER_VMA_LOCK
+	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
+	select ARCH_WANT_DEFAULT_BPF_JIT
+	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
+	select ARCH_WANT_FRAME_POINTERS
+	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
+	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_WANTS_NO_INSTR
+	select ARCH_WANTS_THP_SWAP if ARM64_4K_PAGES
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARM_AMBA
+	select ARM_ARCH_TIMER
+	select ARM_GIC
+	select AUDIT_ARCH_COMPAT_GENERIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI_FW
+	select BUILDTIME_TABLE_SORT
+	select CLONE_BACKWARDS
+	select COMMON_CLK
+	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select CRC32
+	select DCACHE_WORD_ACCESS
+	select DYNAMIC_FTRACE if FUNCTION_TRACER
+	select DMA_BOUNCE_UNALIGNED_KMALLOC
+	select DMA_DIRECT_REMAP
+	select EDAC_SUPPORT
+	select FRAME_POINTER
+	select FUNCTION_ALIGNMENT_4B
+	select FUNCTION_ALIGNMENT_8B if DYNAMIC_FTRACE_WITH_CALL_OPS
+	select GENERIC_ALLOCATOR
+	select GENERIC_ARCH_TOPOLOGY
+	select GENERIC_CLOCKEVENTS_BROADCAST
+	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_VULNERABILITIES
+	select GENERIC_EARLY_IOREMAP
+	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IOREMAP
+	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_LIB_DEVMEM_IS_ALLOWED
+	select GENERIC_PCI_IOMAP
+	select GENERIC_PTDUMP
+	select GENERIC_SCHED_CLOCK
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_TIME_VSYSCALL
+	select GENERIC_GETTIMEOFDAY
+	select GENERIC_VDSO_TIME_NS
+	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
+	select HAVE_MOVE_PMD
+	select HAVE_MOVE_PUD
+	select HAVE_PCI
+	select HAVE_ACPI_APEI if (ACPI && EFI)
+	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_BITREVERSE
+	select HAVE_ARCH_COMPILER_H
+	select HAVE_ARCH_HUGE_VMALLOC
+	select HAVE_ARCH_HUGE_VMAP
+	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_JUMP_LABEL_RELATIVE
+	select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KASAN_HW_TAGS if (HAVE_ARCH_KASAN && ARM64_MTE)
+	# Some instrumentation may be unsound, hence EXPERT
+	select HAVE_ARCH_KCSAN if EXPERT
+	select HAVE_ARCH_KFENCE
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_MMAP_RND_BITS
+	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
+	select HAVE_ARCH_PREL32_RELOCATIONS
+	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ARCH_STACKLEAK
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_VMAP_STACK
+	select HAVE_ARM_SMCCC
+	select HAVE_ASM_MODVERSIONS
+	select HAVE_EBPF_JIT
+	select HAVE_C_RECORDMCOUNT
+	select HAVE_CMPXCHG_DOUBLE
+	select HAVE_CMPXCHG_LOCAL
+	select HAVE_CONTEXT_TRACKING_USER
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_CONTIGUOUS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS \
+		if $(cc-option,-fpatchable-function-entry=2)
+	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
+		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
+	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
+		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
+		    !CC_OPTIMIZE_FOR_SIZE)
+	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
+		if DYNAMIC_FTRACE_WITH_ARGS
+	select HAVE_SAMPLE_FTRACE_DIRECT
+	select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select HAVE_FAST_GUP
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_RETVAL if HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_GCC_PLUGINS
+	select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && \
+		HW_PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IOREMAP_PROT
+	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_KVM
+	select HAVE_MOD_ARCH_SPECIFIC
+	select HAVE_NMI
+	select HAVE_PERF_EVENTS
+	select HAVE_PERF_EVENTS_NMI if ARM64_PSEUDO_NMI
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_PREEMPT_DYNAMIC_KEY
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
+	select HAVE_FUNCTION_ARG_ACCESS_API
+	select MMU_GATHER_RCU_TABLE_FREE
+	select HAVE_RSEQ
+	select HAVE_STACKPROTECTOR
+	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_GENERIC_VDSO
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select IRQ_DOMAIN
+	select IRQ_FORCED_THREADING
+	select KASAN_VMALLOC if KASAN
+	select LOCK_MM_AND_FIND_VMA
+	select MODULES_USE_ELF_RELA
+	select NEED_DMA_MAP_STATE
+	select NEED_SG_DMA_LENGTH
+	select OF
+	select OF_EARLY_FLATTREE
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_ECAM if (ACPI && PCI)
+	select PCI_SYSCALL if PCI
+	select POWER_RESET
+	select POWER_SUPPLY
+	select SPARSE_IRQ
+	select SWIOTLB
+	select SYSCTL_EXCEPTION_TRACE
+	select THREAD_INFO_IN_TASK
+	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
+	select TRACE_IRQFLAGS_SUPPORT
+	select TRACE_IRQFLAGS_NMI_SUPPORT
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+	help
+	  ARM 64-bit (AArch64) Linux support.
+
+config CLANG_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
+	def_bool CC_IS_CLANG
+	# https://github.com/ClangBuiltLinux/linux/issues/1507
+	depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
+
+config GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_ARGS
+	def_bool CC_IS_GCC
+	depends on $(cc-option,-fpatchable-function-entry=2)
+	select HAVE_DYNAMIC_FTRACE_WITH_ARGS
+
+config 64BIT
+	def_bool y
+
+config MMU
+	def_bool y
+
+config ARM64_PAGE_SHIFT
+	int
+	default 16 if ARM64_64K_PAGES
+	default 14 if ARM64_16K_PAGES
+	default 12
+
+config ARM64_CONT_PTE_SHIFT
+	int
+	default 5 if ARM64_64K_PAGES
+	default 7 if ARM64_16K_PAGES
+	default 4
+
+config ARM64_CONT_PMD_SHIFT
+	int
+	default 5 if ARM64_64K_PAGES
+	default 5 if ARM64_16K_PAGES
+	default 4
+
+config ARCH_MMAP_RND_BITS_MIN
+	default 14 if ARM64_64K_PAGES
+	default 16 if ARM64_16K_PAGES
+	default 18
+
+# max bits determined by the following formula:
+#  VA_BITS - PAGE_SHIFT - 3
+config ARCH_MMAP_RND_BITS_MAX
+	default 19 if ARM64_VA_BITS=36
+	default 24 if ARM64_VA_BITS=39
+	default 27 if ARM64_VA_BITS=42
+	default 30 if ARM64_VA_BITS=47
+	default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
+	default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
+	default 33 if ARM64_VA_BITS=48
+	default 14 if ARM64_64K_PAGES
+	default 16 if ARM64_16K_PAGES
+	default 18
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+	default 7 if ARM64_64K_PAGES
+	default 9 if ARM64_16K_PAGES
+	default 11
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+	default 16
+
+config NO_IOPORT_MAP
+	def_bool y if !PCI
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config ILLEGAL_POINTER_VALUE
+	hex
+	default 0xdead000000000000
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
+config GENERIC_BUG_RELATIVE_POINTERS
+	def_bool y
+	depends on GENERIC_BUG
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CSUM
+	def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config SMP
+	def_bool y
+
+config KERNEL_MODE_NEON
+	def_bool y
+
+config FIX_EARLYCON_MEM
+	def_bool y
+
+config PGTABLE_LEVELS
+	int
+	default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
+	default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
+	default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
+	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
+	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
+	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
+
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+
+config BROKEN_GAS_INST
+	def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n)
+
+config BUILTIN_RETURN_ADDRESS_STRIPS_PAC
+	bool
+	# Clang's __builtin_return_adddress() strips the PAC since 12.0.0
+	# https://reviews.llvm.org/D75044
+	default y if CC_IS_CLANG && (CLANG_VERSION >= 120000)
+	# GCC's __builtin_return_address() strips the PAC since 11.1.0,
+	# and this was backported to 10.2.0, 9.4.0, 8.5.0, but not earlier
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94891
+	default y if CC_IS_GCC && (GCC_VERSION >= 110100)
+	default y if CC_IS_GCC && (GCC_VERSION >= 100200) && (GCC_VERSION < 110000)
+	default y if CC_IS_GCC && (GCC_VERSION >=  90400) && (GCC_VERSION < 100000)
+	default y if CC_IS_GCC && (GCC_VERSION >=  80500) && (GCC_VERSION <  90000)
+	default n
+
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN_GENERIC || KASAN_SW_TAGS
+	default 0xdfff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
+	default 0xdfffc00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
+	default 0xdffffe0000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
+	default 0xdfffffc000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
+	default 0xdffffff800000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
+	default 0xefff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
+	default 0xefffc00000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
+	default 0xeffffe0000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
+	default 0xefffffc000000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
+	default 0xeffffff800000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
+	default 0xffffffffffffffff
+
+config UNWIND_TABLES
+	bool
+
+source "arch/arm64/Kconfig.platforms"
+
+menu "Kernel Features"
+
+menu "ARM errata workarounds via the alternatives framework"
+
+config AMPERE_ERRATUM_AC03_CPU_38
+        bool "AmpereOne: AC03_CPU_38: Certain bits in the Virtualization Translation Control Register and Translation Control Registers do not follow RES0 semantics"
+	default y
+	help
+	  This option adds an alternative code sequence to work around Ampere
+	  erratum AC03_CPU_38 on AmpereOne.
+
+	  The affected design reports FEAT_HAFDBS as not implemented in
+	  ID_AA64MMFR1_EL1.HAFDBS, but (V)TCR_ELx.{HA,HD} are not RES0
+	  as required by the architecture. The unadvertised HAFDBS
+	  implementation suffers from an additional erratum where hardware
+	  A/D updates can occur after a PTE has been marked invalid.
+
+	  The workaround forces KVM to explicitly set VTCR_EL2.HA to 0,
+	  which avoids enabling unadvertised hardware Access Flag management
+	  at stage-2.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_CLEAN_CACHE
+	bool
+
+config ARM64_ERRATUM_826319
+	bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 826319 on Cortex-A53 parts up to r0p2 with an AMBA 4 ACE or
+	  AXI master interface and an L2 cache.
+
+	  If a Cortex-A53 uses an AMBA AXI4 ACE interface to other processors
+	  and is unable to accept a certain write via this interface, it will
+	  not progress on read data presented on the read data channel and the
+	  system can deadlock.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_827319
+	bool "Cortex-A53: 827319: Data cache clean instructions might cause overlapping transactions to the interconnect"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 827319 on Cortex-A53 parts up to r0p2 with an AMBA 5 CHI
+	  master interface and an L2 cache.
+
+	  Under certain conditions this erratum can cause a clean line eviction
+	  to occur at the same time as another transaction to the same address
+	  on the AMBA 5 CHI interface, which can cause data corruption if the
+	  interconnect reorders the two transactions.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_824069
+	bool "Cortex-A53: 824069: Cache line might not be marked as clean after a CleanShared snoop"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 824069 on Cortex-A53 parts up to r0p2 when it is connected
+	  to a coherent interconnect.
+
+	  If a Cortex-A53 processor is executing a store or prefetch for
+	  write instruction at the same time as a processor in another
+	  cluster is executing a cache maintenance operation to the same
+	  address, then this erratum might cause a clean cache line to be
+	  incorrectly marked as dirty.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this option does not necessarily enable the
+	  workaround, as it depends on the alternative framework, which will
+	  only patch the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_819472
+	bool "Cortex-A53: 819472: Store exclusive instructions might cause data corruption"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 819472 on Cortex-A53 parts up to r0p1 with an L2 cache
+	  present when it is connected to a coherent interconnect.
+
+	  If the processor is executing a load and store exclusive sequence at
+	  the same time as a processor in another cluster is executing a cache
+	  maintenance operation to the same address, then this erratum might
+	  cause data corruption.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_832075
+	bool "Cortex-A57: 832075: possible deadlock on mixing exclusive memory accesses with device loads"
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 832075 on Cortex-A57 parts up to r1p2.
+
+	  Affected Cortex-A57 parts might deadlock when exclusive load/store
+	  instructions to Write-Back memory are mixed with Device loads.
+
+	  The workaround is to promote device loads to use Load-Acquire
+	  semantics.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_834220
+	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+	depends on KVM
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 834220 on Cortex-A57 parts up to r1p2.
+
+	  Affected Cortex-A57 parts might report a Stage 2 translation
+	  fault as the result of a Stage 1 fault for load crossing a
+	  page boundary when there is a permission or device memory
+	  alignment fault at Stage 1 and a translation fault at Stage 2.
+
+	  The workaround is to verify that the Stage 1 translation
+	  doesn't generate a fault before handling the Stage 2 fault.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1742098
+	bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
+	depends on COMPAT
+	default y
+	help
+	  This option removes the AES hwcap for aarch32 user-space to
+	  workaround erratum 1742098 on Cortex-A57 and Cortex-A72.
+
+	  Affected parts may corrupt the AES state if an interrupt is
+	  taken between a pair of AES instructions. These instructions
+	  are only present if the cryptography extensions are present.
+	  All software should have a fallback implementation for CPUs
+	  that don't implement the cryptography extensions.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_845719
+	bool "Cortex-A53: 845719: a load might read incorrect data"
+	depends on COMPAT
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 845719 on Cortex-A53 parts up to r0p4.
+
+	  When running a compat (AArch32) userspace on an affected Cortex-A53
+	  part, a load at EL0 from a virtual address that matches the bottom 32
+	  bits of the virtual address used by a recent load at (AArch64) EL1
+	  might return incorrect data.
+
+	  The workaround is to write the contextidr_el1 register on exception
+	  return to a 32-bit task.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_843419
+	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
+	default y
+	help
+	  This option links the kernel with '--fix-cortex-a53-843419' and
+	  enables PLT support to replace certain ADRP instructions, which can
+	  cause subsequent memory accesses to use an incorrect address on
+	  Cortex-A53 parts up to r0p4.
+
+	  If unsure, say Y.
+
+config ARM64_LD_HAS_FIX_ERRATUM_843419
+	def_bool $(ld-option,--fix-cortex-a53-843419)
+
+config ARM64_ERRATUM_1024718
+	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
+	default y
+	help
+	  This option adds a workaround for ARM Cortex-A55 Erratum 1024718.
+
+	  Affected Cortex-A55 cores (all revisions) could cause incorrect
+	  update of the hardware dirty bit when the DBM/AP bits are updated
+	  without a break-before-make. The workaround is to disable the usage
+	  of hardware DBM locally on the affected cores. CPUs not affected by
+	  this erratum will continue to use the feature.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1418040
+	bool "Cortex-A76/Neoverse-N1: MRC read following MRRC read of specific Generic Timer in AArch32 might give incorrect result"
+	default y
+	depends on COMPAT
+	help
+	  This option adds a workaround for ARM Cortex-A76/Neoverse-N1
+	  errata 1188873 and 1418040.
+
+	  Affected Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) could
+	  cause register corruption when accessing the timer registers
+	  from AArch32 userspace.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_SPECULATIVE_AT
+	bool
+
+config ARM64_ERRATUM_1165522
+	bool "Cortex-A76: 1165522: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
+	default y
+	select ARM64_WORKAROUND_SPECULATIVE_AT
+	help
+	  This option adds a workaround for ARM Cortex-A76 erratum 1165522.
+
+	  Affected Cortex-A76 cores (r0p0, r1p0, r2p0) could end-up with
+	  corrupted TLBs by speculating an AT instruction during a guest
+	  context switch.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1319367
+	bool "Cortex-A57/A72: 1319537: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
+	default y
+	select ARM64_WORKAROUND_SPECULATIVE_AT
+	help
+	  This option adds work arounds for ARM Cortex-A57 erratum 1319537
+	  and A72 erratum 1319367
+
+	  Cortex-A57 and A72 cores could end-up with corrupted TLBs by
+	  speculating an AT instruction during a guest context switch.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1530923
+	bool "Cortex-A55: 1530923: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
+	default y
+	select ARM64_WORKAROUND_SPECULATIVE_AT
+	help
+	  This option adds a workaround for ARM Cortex-A55 erratum 1530923.
+
+	  Affected Cortex-A55 cores (r0p0, r0p1, r1p0, r2p0) could end-up with
+	  corrupted TLBs by speculating an AT instruction during a guest
+	  context switch.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+
+config ARM64_ERRATUM_2441007
+	bool "Cortex-A55: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A55 erratum #2441007.
+
+	  Under very rare circumstances, affected Cortex-A55 CPUs
+	  may not handle a race between a break-before-make sequence on one
+	  CPU, and another CPU accessing the same page. This could allow a
+	  store to a page that has been unmapped.
+
+	  Work around this by adding the affected CPUs to the list that needs
+	  TLB sequences to be done twice.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1286807
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A76 erratum 1286807.
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
+	  address for a cacheable mapping of a location is being
+	  accessed by a core while another core is remapping the virtual
+	  address to a new physical page using the recommended
+	  break-before-make sequence, then under very rare circumstances
+	  TLBI+DSB completes before a read using the translation being
+	  invalidated has been observed by other observers. The
+	  workaround repeats the TLBI+DSB operation.
+
+config ARM64_ERRATUM_1463225
+	bool "Cortex-A76: Software Step might prevent interrupt recognition"
+	default y
+	help
+	  This option adds a workaround for Arm Cortex-A76 erratum 1463225.
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p1), software stepping
+	  of a system call instruction (SVC) can prevent recognition of
+	  subsequent interrupts when software stepping is disabled in the
+	  exception handler of the system call and either kernel debugging
+	  is enabled or VHE is in use.
+
+	  Work around the erratum by triggering a dummy step exception
+	  when handling a system call from a task that is being stepped
+	  in a VHE configuration of the kernel.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1542419
+	bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
+	default y
+	help
+	  This option adds a workaround for ARM Neoverse-N1 erratum
+	  1542419.
+
+	  Affected Neoverse-N1 cores could execute a stale instruction when
+	  modified by another CPU. The workaround depends on a firmware
+	  counterpart.
+
+	  Workaround the issue by hiding the DIC feature from EL0. This
+	  forces user-space to perform cache maintenance.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1508412
+	bool "Cortex-A77: 1508412: workaround deadlock on sequence of NC/Device load and store exclusive or PAR read"
+	default y
+	help
+	  This option adds a workaround for Arm Cortex-A77 erratum 1508412.
+
+	  Affected Cortex-A77 cores (r0p0, r1p0) could deadlock on a sequence
+	  of a store-exclusive or read of PAR_EL1 and a load with device or
+	  non-cacheable memory attributes. The workaround depends on a firmware
+	  counterpart.
+
+	  KVM guests must also have the workaround implemented or they can
+	  deadlock the system.
+
+	  Work around the issue by inserting DMB SY barriers around PAR_EL1
+	  register reads and warning KVM users. The DMB barrier is sufficient
+	  to prevent a speculative PAR_EL1 read.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	bool
+
+config ARM64_ERRATUM_2051678
+	bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit"
+	default y
+	help
+	  This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678.
+	  Affected Cortex-A510 might not respect the ordering rules for
+	  hardware update of the page table's dirty bit. The workaround
+	  is to not enable the feature on affected CPUs.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2077057
+	bool "Cortex-A510: 2077057: workaround software-step corrupting SPSR_EL2"
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2077057.
+	  Affected Cortex-A510 may corrupt SPSR_EL2 when the a step exception is
+	  expected, but a Pointer Authentication trap is taken instead. The
+	  erratum causes SPSR_EL1 to be copied to SPSR_EL2, which could allow
+	  EL1 to cause a return to EL2 with a guest controlled ELR_EL2.
+
+	  This can only happen when EL2 is stepping EL1.
+
+	  When these conditions occur, the SPSR_EL2 value is unchanged from the
+	  previous guest entry, and can be restored from the in-memory copy.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2658417
+	bool "Cortex-A510: 2658417: remove BF16 support due to incorrect result"
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2658417.
+	  Affected Cortex-A510 (r0p0 to r1p1) may produce the wrong result for
+	  BFMMLA or VMMLA instructions in rare circumstances when a pair of
+	  A510 CPUs are using shared neon hardware. As the sharing is not
+	  discoverable by the kernel, hide the BF16 HWCAP to indicate that
+	  user-space should not be using these instructions.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2119858
+	bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode"
+	default y
+	depends on CORESIGHT_TRBE
+	select ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	help
+	  This option adds the workaround for ARM Cortex-A710/X2 erratum 2119858.
+
+	  Affected Cortex-A710/X2 cores could overwrite up to 3 cache lines of trace
+	  data at the base of the buffer (pointed to by TRBASER_EL1) in FILL mode in
+	  the event of a WRAP event.
+
+	  Work around the issue by always making sure we move the TRBPTR_EL1 by
+	  256 bytes before enabling the buffer and filling the first 256 bytes of
+	  the buffer with ETM ignore packets upon disabling.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2139208
+	bool "Neoverse-N2: 2139208: workaround TRBE overwriting trace data in FILL mode"
+	default y
+	depends on CORESIGHT_TRBE
+	select ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	help
+	  This option adds the workaround for ARM Neoverse-N2 erratum 2139208.
+
+	  Affected Neoverse-N2 cores could overwrite up to 3 cache lines of trace
+	  data at the base of the buffer (pointed to by TRBASER_EL1) in FILL mode in
+	  the event of a WRAP event.
+
+	  Work around the issue by always making sure we move the TRBPTR_EL1 by
+	  256 bytes before enabling the buffer and filling the first 256 bytes of
+	  the buffer with ETM ignore packets upon disabling.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	bool
+
+config ARM64_ERRATUM_2054223
+	bool "Cortex-A710: 2054223: workaround TSB instruction failing to flush trace"
+	default y
+	select ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	help
+	  Enable workaround for ARM Cortex-A710 erratum 2054223
+
+	  Affected cores may fail to flush the trace data on a TSB instruction, when
+	  the PE is in trace prohibited state. This will cause losing a few bytes
+	  of the trace cached.
+
+	  Workaround is to issue two TSB consecutively on affected cores.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2067961
+	bool "Neoverse-N2: 2067961: workaround TSB instruction failing to flush trace"
+	default y
+	select ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	help
+	  Enable workaround for ARM Neoverse-N2 erratum 2067961
+
+	  Affected cores may fail to flush the trace data on a TSB instruction, when
+	  the PE is in trace prohibited state. This will cause losing a few bytes
+	  of the trace cached.
+
+	  Workaround is to issue two TSB consecutively on affected cores.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	bool
+
+config ARM64_ERRATUM_2253138
+	bool "Neoverse-N2: 2253138: workaround TRBE writing to address out-of-range"
+	depends on CORESIGHT_TRBE
+	default y
+	select ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	help
+	  This option adds the workaround for ARM Neoverse-N2 erratum 2253138.
+
+	  Affected Neoverse-N2 cores might write to an out-of-range address, not reserved
+	  for TRBE. Under some conditions, the TRBE might generate a write to the next
+	  virtually addressed page following the last page of the TRBE address space
+	  (i.e., the TRBLIMITR_EL1.LIMIT), instead of wrapping around to the base.
+
+	  Work around this in the driver by always making sure that there is a
+	  page beyond the TRBLIMITR_EL1.LIMIT, within the space allowed for the TRBE.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2224489
+	bool "Cortex-A710/X2: 2224489: workaround TRBE writing to address out-of-range"
+	depends on CORESIGHT_TRBE
+	default y
+	select ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	help
+	  This option adds the workaround for ARM Cortex-A710/X2 erratum 2224489.
+
+	  Affected Cortex-A710/X2 cores might write to an out-of-range address, not reserved
+	  for TRBE. Under some conditions, the TRBE might generate a write to the next
+	  virtually addressed page following the last page of the TRBE address space
+	  (i.e., the TRBLIMITR_EL1.LIMIT), instead of wrapping around to the base.
+
+	  Work around this in the driver by always making sure that there is a
+	  page beyond the TRBLIMITR_EL1.LIMIT, within the space allowed for the TRBE.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2441009
+	bool "Cortex-A510: Completion of affected memory accesses might not be guaranteed by completion of a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A510 erratum #2441009.
+
+	  Under very rare circumstances, affected Cortex-A510 CPUs
+	  may not handle a race between a break-before-make sequence on one
+	  CPU, and another CPU accessing the same page. This could allow a
+	  store to a page that has been unmapped.
+
+	  Work around this by adding the affected CPUs to the list that needs
+	  TLB sequences to be done twice.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2064142
+	bool "Cortex-A510: 2064142: workaround TRBE register writes while disabled"
+	depends on CORESIGHT_TRBE
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2064142.
+
+	  Affected Cortex-A510 core might fail to write into system registers after the
+	  TRBE has been disabled. Under some conditions after the TRBE has been disabled
+	  writes into TRBE registers TRBLIMITR_EL1, TRBPTR_EL1, TRBBASER_EL1, TRBSR_EL1,
+	  and TRBTRG_EL1 will be ignored and will not be effected.
+
+	  Work around this in the driver by executing TSB CSYNC and DSB after collection
+	  is stopped and before performing a system register write to one of the affected
+	  registers.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2038923
+	bool "Cortex-A510: 2038923: workaround TRBE corruption with enable"
+	depends on CORESIGHT_TRBE
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2038923.
+
+	  Affected Cortex-A510 core might cause an inconsistent view on whether trace is
+	  prohibited within the CPU. As a result, the trace buffer or trace buffer state
+	  might be corrupted. This happens after TRBE buffer has been enabled by setting
+	  TRBLIMITR_EL1.E, followed by just a single context synchronization event before
+	  execution changes from a context, in which trace is prohibited to one where it
+	  isn't, or vice versa. In these mentioned conditions, the view of whether trace
+	  is prohibited is inconsistent between parts of the CPU, and the trace buffer or
+	  the trace buffer state might be corrupted.
+
+	  Work around this in the driver by preventing an inconsistent view of whether the
+	  trace is prohibited or not based on TRBLIMITR_EL1.E by immediately following a
+	  change to TRBLIMITR_EL1.E with at least one ISB instruction before an ERET, or
+	  two ISB instructions if no ERET is to take place.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1902691
+	bool "Cortex-A510: 1902691: workaround TRBE trace corruption"
+	depends on CORESIGHT_TRBE
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 1902691.
+
+	  Affected Cortex-A510 core might cause trace data corruption, when being written
+	  into the memory. Effectively TRBE is broken and hence cannot be used to capture
+	  trace data.
+
+	  Work around this problem in the driver by just preventing TRBE initialization on
+	  affected cpus. The firmware must have disabled the access to TRBE for the kernel
+	  on such implementations. This will cover the kernel for any firmware that doesn't
+	  do this already.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2457168
+	bool "Cortex-A510: 2457168: workaround for AMEVCNTR01 incrementing incorrectly"
+	depends on ARM64_AMU_EXTN
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2457168.
+
+	  The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate
+	  as the system counter. On affected Cortex-A510 cores AMEVCNTR01 increments
+	  incorrectly giving a significantly higher output value.
+
+	  Work around this problem by returning 0 when reading the affected counter in
+	  key locations that results in disabling all users of this counter. This effect
+	  is the same to firmware disabling affected counters.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2645198
+	bool "Cortex-A715: 2645198: Workaround possible [ESR|FAR]_ELx corruption"
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A715 erratum 2645198.
+
+	  If a Cortex-A715 cpu sees a page mapping permissions change from executable
+	  to non-executable, it may corrupt the ESR_ELx and FAR_ELx registers on the
+	  next instruction abort caused by permission fault.
+
+	  Only user-space does executable to non-executable permission transition via
+	  mprotect() system call. Workaround the problem by doing a break-before-make
+	  TLB invalidation, for all changes to executable user space mappings.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	bool
+
+config ARM64_ERRATUM_2966298
+	bool "Cortex-A520: 2966298: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A520 erratum 2966298.
+
+	  On an affected Cortex-A520 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_3117295
+	bool "Cortex-A510: 3117295: workaround for speculatively executed unprivileged load"
+	select ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 3117295.
+
+	  On an affected Cortex-A510 core, a speculatively executed unprivileged
+	  load might leak data from a privileged level via a cache side channel.
+
+	  Work around this problem by executing a TLBI before returning to EL0.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_22375
+	bool "Cavium erratum 22375, 24313"
+	default y
+	help
+	  Enable workaround for errata 22375 and 24313.
+
+	  This implements two gicv3-its errata workarounds for ThunderX. Both
+	  with a small impact affecting only ITS table allocation.
+
+	    erratum 22375: only alloc 8MB table size
+	    erratum 24313: ignore memory access type
+
+	  The fixes are in ITS initialization and basically ignore memory access
+	  type and table size provided by the TYPER and BASER registers.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_23144
+	bool "Cavium erratum 23144: ITS SYNC hang on dual socket system"
+	depends on NUMA
+	default y
+	help
+	  ITS SYNC command hang for cross node io and collections/cpu mapping.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_23154
+	bool "Cavium errata 23154 and 38545: GICv3 lacks HW synchronisation"
+	default y
+	help
+	  The ThunderX GICv3 implementation requires a modified version for
+	  reading the IAR status to ensure data synchronization
+	  (access to icc_iar1_el1 is not sync'ed before and after).
+
+	  It also suffers from erratum 38545 (also present on Marvell's
+	  OcteonTX and OcteonTX2), resulting in deactivated interrupts being
+	  spuriously presented to the CPU interface.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_27456
+	bool "Cavium erratum 27456: Broadcast TLBI instructions may cause icache corruption"
+	default y
+	help
+	  On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
+	  instructions may cause the icache to become corrupted if it
+	  contains data for a non-current ASID.  The fix is to
+	  invalidate the icache when changing the mm context.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_30115
+	bool "Cavium erratum 30115: Guest may disable interrupts in host"
+	default y
+	help
+	  On ThunderX T88 pass 1.x through 2.2, T81 pass 1.0 through
+	  1.2, and T83 Pass 1.0, KVM guest execution may disable
+	  interrupts in host. Trapping both GICv3 group-0 and group-1
+	  accesses sidesteps the issue.
+
+	  If unsure, say Y.
+
+config CAVIUM_TX2_ERRATUM_219
+	bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails"
+	default y
+	help
+	  On Cavium ThunderX2, a load, store or prefetch instruction between a
+	  TTBR update and the corresponding context synchronizing operation can
+	  cause a spurious Data Abort to be delivered to any hardware thread in
+	  the CPU core.
+
+	  Work around the issue by avoiding the problematic code sequence and
+	  trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The
+	  trap handler performs the corresponding register access, skips the
+	  instruction and ensures context synchronization by virtue of the
+	  exception return.
+
+	  If unsure, say Y.
+
+config FUJITSU_ERRATUM_010001
+	bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
+	default y
+	help
+	  This option adds a workaround for Fujitsu-A64FX erratum E#010001.
+	  On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
+	  accesses may cause undefined fault (Data abort, DFSC=0b111111).
+	  This fault occurs under a specific hardware condition when a
+	  load/store instruction performs an address translation using:
+	  case-1  TTBR0_EL1 with TCR_EL1.NFD0 == 1.
+	  case-2  TTBR0_EL2 with TCR_EL2.NFD0 == 1.
+	  case-3  TTBR1_EL1 with TCR_EL1.NFD1 == 1.
+	  case-4  TTBR1_EL2 with TCR_EL2.NFD1 == 1.
+
+	  The workaround is to ensure these bits are clear in TCR_ELx.
+	  The workaround only affects the Fujitsu-A64FX.
+
+	  If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+	bool "Hip07 161600802: Erroneous redistributor VLPI base"
+	default y
+	help
+	  The HiSilicon Hip07 SoC uses the wrong redistributor base
+	  when issued ITS commands such as VMOVP and VMAPP, and requires
+	  a 128kB offset to be applied to the target address in this commands.
+
+	  If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_1003
+	bool "Falkor E1003: Incorrect translation due to ASID change"
+	default y
+	help
+	  On Falkor v1, an incorrect ASID may be cached in the TLB when ASID
+	  and BADDR are changed together in TTBRx_EL1. Since we keep the ASID
+	  in TTBR1_EL1, this situation only occurs in the entry trampoline and
+	  then only for entries in the walk cache, since the leaf translation
+	  is unchanged. Work around the erratum by invalidating the walk cache
+	  entries for the trampoline before entering the kernel proper.
+
+config QCOM_FALKOR_ERRATUM_1009
+	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  On Falkor v1, the CPU may prematurely complete a DSB following a
+	  TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation
+	  one more time to fix the issue.
+
+	  If unsure, say Y.
+
+config QCOM_QDF2400_ERRATUM_0065
+	bool "QDF2400 E0065: Incorrect GITS_TYPER.ITT_Entry_size"
+	default y
+	help
+	  On Qualcomm Datacenter Technologies QDF2400 SoC, ITS hardware reports
+	  ITE size incorrectly. The GITS_TYPER.ITT_Entry_size field should have
+	  been indicated as 16Bytes (0xf), not 8Bytes (0x7).
+
+	  If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_E1041
+	bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
+	default y
+	help
+	  Falkor CPU may speculatively fetch instructions from an improper
+	  memory location when MMU translation is changed from SCTLR_ELn[M]=1
+	  to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
+
+	  If unsure, say Y.
+
+config NVIDIA_CARMEL_CNP_ERRATUM
+	bool "NVIDIA Carmel CNP: CNP on Carmel semantically different than ARM cores"
+	default y
+	help
+	  If CNP is enabled on Carmel cores, non-sharable TLBIs on a core will not
+	  invalidate shared TLB entries installed by a different core, as it would
+	  on standard ARM cores.
+
+	  If unsure, say Y.
+
+config ROCKCHIP_ERRATUM_3588001
+	bool "Rockchip 3588001: GIC600 can not support shareability attributes"
+	default y
+	help
+	  The Rockchip RK3588 GIC600 SoC integration does not support ACE/ACE-lite.
+	  This means, that its sharability feature may not be used, even though it
+	  is supported by the IP itself.
+
+	  If unsure, say Y.
+
+config SOCIONEXT_SYNQUACER_PREITS
+	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+	default y
+	help
+	  Socionext Synquacer SoCs implement a separate h/w block to generate
+	  MSI doorbell writes with non-zero values for the device ID.
+
+	  If unsure, say Y.
+
+endmenu # "ARM errata workarounds via the alternatives framework"
+
+choice
+	prompt "Page size"
+	default ARM64_4K_PAGES
+	help
+	  Page size (translation granule) configuration.
+
+config ARM64_4K_PAGES
+	bool "4KB"
+	help
+	  This feature enables 4KB pages support.
+
+config ARM64_16K_PAGES
+	bool "16KB"
+	help
+	  The system will use 16KB pages support. AArch32 emulation
+	  requires applications compiled with 16K (or a multiple of 16K)
+	  aligned segments.
+
+config ARM64_64K_PAGES
+	bool "64KB"
+	help
+	  This feature enables 64KB pages support (4KB by default)
+	  allowing only two levels of page tables and faster TLB
+	  look-up. AArch32 emulation requires applications compiled
+	  with 64K aligned segments.
+
+endchoice
+
+choice
+	prompt "Virtual address space size"
+	default ARM64_VA_BITS_39 if ARM64_4K_PAGES
+	default ARM64_VA_BITS_47 if ARM64_16K_PAGES
+	default ARM64_VA_BITS_42 if ARM64_64K_PAGES
+	help
+	  Allows choosing one of multiple possible virtual address
+	  space sizes. The level of translation table is determined by
+	  a combination of page size and virtual address space size.
+
+config ARM64_VA_BITS_36
+	bool "36-bit" if EXPERT
+	depends on ARM64_16K_PAGES
+
+config ARM64_VA_BITS_39
+	bool "39-bit"
+	depends on ARM64_4K_PAGES
+
+config ARM64_VA_BITS_42
+	bool "42-bit"
+	depends on ARM64_64K_PAGES
+
+config ARM64_VA_BITS_47
+	bool "47-bit"
+	depends on ARM64_16K_PAGES
+
+config ARM64_VA_BITS_48
+	bool "48-bit"
+
+config ARM64_VA_BITS_52
+	bool "52-bit"
+	depends on ARM64_64K_PAGES && (ARM64_PAN || !ARM64_SW_TTBR0_PAN)
+	help
+	  Enable 52-bit virtual addressing for userspace when explicitly
+	  requested via a hint to mmap(). The kernel will also use 52-bit
+	  virtual addresses for its own mappings (provided HW support for
+	  this feature is available, otherwise it reverts to 48-bit).
+
+	  NOTE: Enabling 52-bit virtual addressing in conjunction with
+	  ARMv8.3 Pointer Authentication will result in the PAC being
+	  reduced from 7 bits to 3 bits, which may have a significant
+	  impact on its susceptibility to brute-force attacks.
+
+	  If unsure, select 48-bit virtual addressing instead.
+
+endchoice
+
+config ARM64_FORCE_52BIT
+	bool "Force 52-bit virtual addresses for userspace"
+	depends on ARM64_VA_BITS_52 && EXPERT
+	help
+	  For systems with 52-bit userspace VAs enabled, the kernel will attempt
+	  to maintain compatibility with older software by providing 48-bit VAs
+	  unless a hint is supplied to mmap.
+
+	  This configuration option disables the 48-bit compatibility logic, and
+	  forces all userspace addresses to be 52-bit on HW that supports it. One
+	  should only enable this configuration option for stress testing userspace
+	  memory management code. If unsure say N here.
+
+config ARM64_VA_BITS
+	int
+	default 36 if ARM64_VA_BITS_36
+	default 39 if ARM64_VA_BITS_39
+	default 42 if ARM64_VA_BITS_42
+	default 47 if ARM64_VA_BITS_47
+	default 48 if ARM64_VA_BITS_48
+	default 52 if ARM64_VA_BITS_52
+
+choice
+	prompt "Physical address space size"
+	default ARM64_PA_BITS_48
+	help
+	  Choose the maximum physical address range that the kernel will
+	  support.
+
+config ARM64_PA_BITS_48
+	bool "48-bit"
+
+config ARM64_PA_BITS_52
+	bool "52-bit (ARMv8.2)"
+	depends on ARM64_64K_PAGES
+	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
+	help
+	  Enable support for a 52-bit physical address space, introduced as
+	  part of the ARMv8.2-LPA extension.
+
+	  With this enabled, the kernel will also continue to work on CPUs that
+	  do not support ARMv8.2-LPA, but with some added memory overhead (and
+	  minor performance overhead).
+
+endchoice
+
+config ARM64_PA_BITS
+	int
+	default 48 if ARM64_PA_BITS_48
+	default 52 if ARM64_PA_BITS_52
+
+choice
+	prompt "Endianness"
+	default CPU_LITTLE_ENDIAN
+	help
+	  Select the endianness of data accesses performed by the CPU. Userspace
+	  applications will need to be compiled and linked for the endianness
+	  that is selected here.
+
+config CPU_BIG_ENDIAN
+	bool "Build big-endian kernel"
+	depends on !LD_IS_LLD || LLD_VERSION >= 130000
+	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
+	depends on AS_IS_GNU || AS_VERSION >= 150000
+	help
+	  Say Y if you plan on running a kernel with a big-endian userspace.
+
+config CPU_LITTLE_ENDIAN
+	bool "Build little-endian kernel"
+	help
+	  Say Y if you plan on running a kernel with a little-endian userspace.
+	  This is usually the case for distributions targeting arm64.
+
+endchoice
+
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_SMT
+	bool "SMT scheduler support"
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
+	default "256"
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	select GENERIC_IRQ_MIGRATION
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+# Common NUMA Features
+config NUMA
+	bool "NUMA Memory Allocation and Scheduler Support"
+	select GENERIC_ARCH_NUMA
+	select ACPI_NUMA if ACPI
+	select OF_NUMA
+	select HAVE_SETUP_PER_CPU_AREA
+	select NEED_PER_CPU_EMBED_FIRST_CHUNK
+	select NEED_PER_CPU_PAGE_FIRST_CHUNK
+	select USE_PERCPU_NUMA_NODE_ID
+	help
+	  Enable NUMA (Non-Uniform Memory Access) support.
+
+	  The kernel will try to allocate memory used by a CPU on the
+	  local memory of the CPU and add some more
+	  NUMA awareness to the kernel.
+
+config NODES_SHIFT
+	int "Maximum NUMA Nodes (as a power of 2)"
+	range 1 10
+	default "4"
+	depends on NUMA
+	help
+	  Specify the maximum number of NUMA Nodes available on the target
+	  system.  Increases memory reserved to accommodate various tables.
+
+source "kernel/Kconfig.hz"
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+	select SPARSEMEM_VMEMMAP
+
+config HW_PERF_EVENTS
+	def_bool y
+	depends on ARM_PMU
+
+# Supported by clang >= 7.0 or GCC >= 12.0.0
+config CC_HAVE_SHADOW_CALL_STACK
+	def_bool $(cc-option, -fsanitize=shadow-call-stack -ffixed-x18)
+
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
+config ARCH_SUPPORTS_KEXEC
+	def_bool PM_SLEEP_SMP
+
+config ARCH_SUPPORTS_KEXEC_FILE
+	def_bool y
+
+config ARCH_SELECTS_KEXEC_FILE
+	def_bool y
+	depends on KEXEC_FILE
+	select HAVE_IMA_KEXEC if IMA
+
+config ARCH_SUPPORTS_KEXEC_SIG
+	def_bool y
+
+config ARCH_SUPPORTS_KEXEC_IMAGE_VERIFY_SIG
+	def_bool y
+
+config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
+	def_bool y
+
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
+
+config TRANS_TABLE
+	def_bool y
+	depends on HIBERNATION || KEXEC_CORE
+
+config XEN_DOM0
+	def_bool y
+	depends on XEN
+
+config XEN
+	bool "Xen guest support on ARM64"
+	depends on ARM64 && OF
+	select SWIOTLB_XEN
+	select PARAVIRT
+	help
+	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
+
+# include/linux/mmzone.h requires the following to be true:
+#
+#   MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+#
+# so the maximum value of MAX_ORDER is SECTION_SIZE_BITS - PAGE_SHIFT:
+#
+#     | SECTION_SIZE_BITS |  PAGE_SHIFT  |  max MAX_ORDER  |  default MAX_ORDER |
+# ----+-------------------+--------------+-----------------+--------------------+
+# 4K  |       27          |      12      |       15        |         10         |
+# 16K |       27          |      14      |       13        |         11         |
+# 64K |       29          |      16      |       13        |         13         |
+config ARCH_FORCE_MAX_ORDER
+	int
+	default "13" if ARM64_64K_PAGES
+	default "11" if ARM64_16K_PAGES
+	default "10"
+	help
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
+
+	  The maximal size of allocation cannot exceed the size of the
+	  section, so the value of MAX_ORDER should satisfy
+
+	    MAX_ORDER + PAGE_SHIFT <= SECTION_SIZE_BITS
+
+	  Don't change if unsure.
+
+config UNMAP_KERNEL_AT_EL0
+	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  be used to bypass MMU permission checks and leak kernel data to
+	  userspace. This can be defended against by unmapping the kernel
+	  when running in userspace, mapping it back in on exception entry
+	  via a trampoline page in the vector table.
+
+	  If unsure, say Y.
+
+config MITIGATE_SPECTRE_BRANCH_HISTORY
+	bool "Mitigate Spectre style attacks against branch history" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation.
+	  When taking an exception from user-space, a sequence of branches
+	  or a firmware call overwrites the branch history.
+
+config RODATA_FULL_DEFAULT_ENABLED
+	bool "Apply r/o permissions of VM areas also to their linear aliases"
+	default y
+	help
+	  Apply read-only attributes of VM areas to the linear alias of
+	  the backing pages as well. This prevents code or read-only data
+	  from being modified (inadvertently or intentionally) via another
+	  mapping of the same memory page. This additional enhancement can
+	  be turned off at runtime by passing rodata=[off|on] (and turned on
+	  with rodata=full if this option is set to 'n')
+
+	  This requires the linear region to be mapped down to pages,
+	  which may adversely affect performance in some cases.
+
+config ARM64_SW_TTBR0_PAN
+	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
+	help
+	  Enabling this option prevents the kernel from accessing
+	  user-space memory directly by pointing TTBR0_EL1 to a reserved
+	  zeroed area and reserved ASID. The user access routines
+	  restore the valid TTBR0_EL1 temporarily.
+
+config ARM64_TAGGED_ADDR_ABI
+	bool "Enable the tagged user addresses syscall ABI"
+	default y
+	help
+	  When this option is enabled, user applications can opt in to a
+	  relaxed ABI via prctl() allowing tagged addresses to be passed
+	  to system calls as pointer arguments. For details, see
+	  Documentation/arch/arm64/tagged-address-abi.rst.
+
+menuconfig COMPAT
+	bool "Kernel support for 32-bit EL0"
+	depends on ARM64_4K_PAGES || EXPERT
+	select HAVE_UID16
+	select OLD_SIGSUSPEND3
+	select COMPAT_OLD_SIGACTION
+	help
+	  This option enables support for a 32-bit EL0 running under a 64-bit
+	  kernel at EL1. AArch32-specific components such as system calls,
+	  the user helper functions, VFP support and the ptrace interface are
+	  handled appropriately by the kernel.
+
+	  If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware
+	  that you will only be able to execute AArch32 binaries that were compiled
+	  with page size aligned segments.
+
+	  If you want to execute 32-bit userspace applications, say Y.
+
+if COMPAT
+
+config KUSER_HELPERS
+	bool "Enable kuser helpers page for 32-bit applications"
+	default y
+	help
+	  Warning: disabling this option may break 32-bit user programs.
+
+	  Provide kuser helpers to compat tasks. The kernel provides
+	  helper code to userspace in read only form at a fixed location
+	  to allow userspace to be independent of the CPU type fitted to
+	  the system. This permits binaries to be run on ARMv4 through
+	  to ARMv8 without modification.
+
+	  See Documentation/arch/arm/kernel_user_helpers.rst for details.
+
+	  However, the fixed address nature of these helpers can be used
+	  by ROP (return orientated programming) authors when creating
+	  exploits.
+
+	  If all of the binaries and libraries which run on your platform
+	  are built specifically for your platform, and make no use of
+	  these helpers, then you can turn this option off to hinder
+	  such exploits. However, in that case, if a binary or library
+	  relying on those helpers is run, it will not function correctly.
+
+	  Say N here only if you are absolutely certain that you do not
+	  need these helpers; otherwise, the safe option is to say Y.
+
+config COMPAT_VDSO
+	bool "Enable vDSO for 32-bit applications"
+	depends on !CPU_BIG_ENDIAN
+	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
+	select GENERIC_COMPAT_VDSO
+	default y
+	help
+	  Place in the process address space of 32-bit applications an
+	  ELF shared object providing fast implementations of gettimeofday
+	  and clock_gettime.
+
+	  You must have a 32-bit build of glibc 2.22 or later for programs
+	  to seamlessly take advantage of this.
+
+config THUMB2_COMPAT_VDSO
+	bool "Compile the 32-bit vDSO for Thumb-2 mode" if EXPERT
+	depends on COMPAT_VDSO
+	default y
+	help
+	  Compile the compat vDSO with '-mthumb -fomit-frame-pointer' if y,
+	  otherwise with '-marm'.
+
+config COMPAT_ALIGNMENT_FIXUPS
+	bool "Fix up misaligned multi-word loads and stores in user space"
+
+menuconfig ARMV8_DEPRECATED
+	bool "Emulate deprecated/obsolete ARMv8 instructions"
+	depends on SYSCTL
+	help
+	  Legacy software support may require certain instructions
+	  that have been deprecated or obsoleted in the architecture.
+
+	  Enable this config to enable selective emulation of these
+	  features.
+
+	  If unsure, say Y
+
+if ARMV8_DEPRECATED
+
+config SWP_EMULATION
+	bool "Emulate SWP/SWPB instructions"
+	help
+	  ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that
+	  they are always undefined. Say Y here to enable software
+	  emulation of these instructions for userspace using LDXR/STXR.
+	  This feature can be controlled at runtime with the abi.swp
+	  sysctl which is disabled by default.
+
+	  In some older versions of glibc [<=2.8] SWP is used during futex
+	  trylock() operations with the assumption that the code will not
+	  be preempted. This invalid assumption may be more likely to fail
+	  with SWP emulation enabled, leading to deadlock of the user
+	  application.
+
+	  NOTE: when accessing uncached shared regions, LDXR/STXR rely
+	  on an external transaction monitoring block called a global
+	  monitor to maintain update atomicity. If your system does not
+	  implement a global monitor, this option can cause programs that
+	  perform SWP operations to uncached memory to deadlock.
+
+	  If unsure, say Y
+
+config CP15_BARRIER_EMULATION
+	bool "Emulate CP15 Barrier instructions"
+	help
+	  The CP15 barrier instructions - CP15ISB, CP15DSB, and
+	  CP15DMB - are deprecated in ARMv8 (and ARMv7). It is
+	  strongly recommended to use the ISB, DSB, and DMB
+	  instructions instead.
+
+	  Say Y here to enable software emulation of these
+	  instructions for AArch32 userspace code. When this option is
+	  enabled, CP15 barrier usage is traced which can help
+	  identify software that needs updating. This feature can be
+	  controlled at runtime with the abi.cp15_barrier sysctl.
+
+	  If unsure, say Y
+
+config SETEND_EMULATION
+	bool "Emulate SETEND instruction"
+	help
+	  The SETEND instruction alters the data-endianness of the
+	  AArch32 EL0, and is deprecated in ARMv8.
+
+	  Say Y here to enable software emulation of the instruction
+	  for AArch32 userspace code. This feature can be controlled
+	  at runtime with the abi.setend sysctl.
+
+	  Note: All the cpus on the system must have mixed endian support at EL0
+	  for this feature to be enabled. If a new CPU - which doesn't support mixed
+	  endian - is hotplugged in after this feature has been enabled, there could
+	  be unexpected results in the applications.
+
+	  If unsure, say Y
+endif # ARMV8_DEPRECATED
+
+endif # COMPAT
+
+menu "ARMv8.1 architectural features"
+
+config ARM64_HW_AFDBM
+	bool "Support for hardware updates of the Access and Dirty page flags"
+	default y
+	help
+	  The ARMv8.1 architecture extensions introduce support for
+	  hardware updates of the access and dirty information in page
+	  table entries. When enabled in TCR_EL1 (HA and HD bits) on
+	  capable processors, accesses to pages with PTE_AF cleared will
+	  set this bit instead of raising an access flag fault.
+	  Similarly, writes to read-only pages with the DBM bit set will
+	  clear the read-only bit (AP[2]) instead of raising a
+	  permission fault.
+
+	  Kernels built with this configuration option enabled continue
+	  to work on pre-ARMv8.1 hardware and the performance impact is
+	  minimal. If unsure, say Y.
+
+config ARM64_PAN
+	bool "Enable support for Privileged Access Never (PAN)"
+	default y
+	help
+	  Privileged Access Never (PAN; part of the ARMv8.1 Extensions)
+	  prevents the kernel or hypervisor from accessing user-space (EL0)
+	  memory directly.
+
+	  Choosing this option will cause any unprotected (not using
+	  copy_to_user et al) memory access to fail with a permission fault.
+
+	  The feature is detected at runtime, and will remain as a 'nop'
+	  instruction if the cpu does not implement the feature.
+
+config AS_HAS_LSE_ATOMICS
+	def_bool $(as-instr,.arch_extension lse)
+
+config ARM64_LSE_ATOMICS
+	bool
+	default ARM64_USE_LSE_ATOMICS
+	depends on AS_HAS_LSE_ATOMICS
+
+config ARM64_USE_LSE_ATOMICS
+	bool "Atomic instructions"
+	default y
+	help
+	  As part of the Large System Extensions, ARMv8.1 introduces new
+	  atomic instructions that are designed specifically to scale in
+	  very large systems.
+
+	  Say Y here to make use of these instructions for the in-kernel
+	  atomic routines. This incurs a small overhead on CPUs that do
+	  not support these instructions and requires the kernel to be
+	  built with binutils >= 2.25 in order for the new instructions
+	  to be used.
+
+endmenu # "ARMv8.1 architectural features"
+
+menu "ARMv8.2 architectural features"
+
+config AS_HAS_ARMV8_2
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.2-a)
+
+config AS_HAS_SHA3
+	def_bool $(as-instr,.arch armv8.2-a+sha3)
+
+config ARM64_PMEM
+	bool "Enable support for persistent memory"
+	select ARCH_HAS_PMEM_API
+	select ARCH_HAS_UACCESS_FLUSHCACHE
+	help
+	  Say Y to enable support for the persistent memory API based on the
+	  ARMv8.2 DCPoP feature.
+
+	  The feature is detected at runtime, and the kernel will use DC CVAC
+	  operations if DC CVAP is not supported (following the behaviour of
+	  DC CVAP itself if the system does not define a point of persistence).
+
+config ARM64_RAS_EXTN
+	bool "Enable support for RAS CPU Extensions"
+	default y
+	help
+	  CPUs that support the Reliability, Availability and Serviceability
+	  (RAS) Extensions, part of ARMv8.2 are able to track faults and
+	  errors, classify them and report them to software.
+
+	  On CPUs with these extensions system software can use additional
+	  barriers to determine if faults are pending and read the
+	  classification from a new set of registers.
+
+	  Selecting this feature will allow the kernel to use these barriers
+	  and access the new registers if the system supports the extension.
+	  Platform RAS features may additionally depend on firmware support.
+
+config ARM64_CNP
+	bool "Enable support for Common Not Private (CNP) translations"
+	default y
+	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
+	help
+	  Common Not Private (CNP) allows translation table entries to
+	  be shared between different PEs in the same inner shareable
+	  domain, so the hardware can use this fact to optimise the
+	  caching of such entries in the TLB.
+
+	  Selecting this option allows the CNP feature to be detected
+	  at runtime, and does not affect PEs that do not implement
+	  this feature.
+
+endmenu # "ARMv8.2 architectural features"
+
+menu "ARMv8.3 architectural features"
+
+config ARM64_PTR_AUTH
+	bool "Enable support for pointer authentication"
+	default y
+	help
+	  Pointer authentication (part of the ARMv8.3 Extensions) provides
+	  instructions for signing and authenticating pointers against secret
+	  keys, which can be used to mitigate Return Oriented Programming (ROP)
+	  and other attacks.
+
+	  This option enables these instructions at EL0 (i.e. for userspace).
+	  Choosing this option will cause the kernel to initialise secret keys
+	  for each process at exec() time, with these keys being
+	  context-switched along with the process.
+
+	  The feature is detected at runtime. If the feature is not present in
+	  hardware it will not be advertised to userspace/KVM guest nor will it
+	  be enabled.
+
+	  If the feature is present on the boot CPU but not on a late CPU, then
+	  the late CPU will be parked. Also, if the boot CPU does not have
+	  address auth and the late CPU has then the late CPU will still boot
+	  but with the feature disabled. On such a system, this option should
+	  not be selected.
+
+config ARM64_PTR_AUTH_KERNEL
+	bool "Use pointer authentication for kernel"
+	default y
+	depends on ARM64_PTR_AUTH
+	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_ARMV8_3
+	# Modern compilers insert a .note.gnu.property section note for PAC
+	# which is only understood by binutils starting with version 2.33.1.
+	depends on LD_IS_LLD || LD_VERSION >= 23301 || (CC_IS_GCC && GCC_VERSION < 90100)
+	depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
+	help
+	  If the compiler supports the -mbranch-protection or
+	  -msign-return-address flag (e.g. GCC 7 or later), then this option
+	  will cause the kernel itself to be compiled with return address
+	  protection. In this case, and if the target hardware is known to
+	  support pointer authentication, then CONFIG_STACKPROTECTOR can be
+	  disabled with minimal loss of protection.
+
+	  This feature works with FUNCTION_GRAPH_TRACER option only if
+	  DYNAMIC_FTRACE_WITH_ARGS is enabled.
+
+config CC_HAS_BRANCH_PROT_PAC_RET
+	# GCC 9 or later, clang 8 or later
+	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
+
+config CC_HAS_SIGN_RETURN_ADDRESS
+	# GCC 7, 8
+	def_bool $(cc-option,-msign-return-address=all)
+
+config AS_HAS_ARMV8_3
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
+
+config AS_HAS_CFI_NEGATE_RA_STATE
+	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
+
+config AS_HAS_LDAPR
+	def_bool $(as-instr,.arch_extension rcpc)
+
+endmenu # "ARMv8.3 architectural features"
+
+menu "ARMv8.4 architectural features"
+
+config ARM64_AMU_EXTN
+	bool "Enable support for the Activity Monitors Unit CPU extension"
+	default y
+	help
+	  The activity monitors extension is an optional extension introduced
+	  by the ARMv8.4 CPU architecture. This enables support for version 1
+	  of the activity monitors architecture, AMUv1.
+
+	  To enable the use of this extension on CPUs that implement it, say Y.
+
+	  Note that for architectural reasons, firmware _must_ implement AMU
+	  support when running on CPUs that present the activity monitors
+	  extension. The required support is present in:
+	    * Version 1.5 and later of the ARM Trusted Firmware
+
+	  For kernels that have this configuration enabled but boot with broken
+	  firmware, you may need to say N here until the firmware is fixed.
+	  Otherwise you may experience firmware panics or lockups when
+	  accessing the counter registers. Even if you are not observing these
+	  symptoms, the values returned by the register reads might not
+	  correctly reflect reality. Most commonly, the value read will be 0,
+	  indicating that the counter is not enabled.
+
+config AS_HAS_ARMV8_4
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
+
+config ARM64_TLB_RANGE
+	bool "Enable support for tlbi range feature"
+	default y
+	depends on AS_HAS_ARMV8_4
+	help
+	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
+	  range of input addresses.
+
+	  The feature introduces new assembly instructions, and they were
+	  support when binutils >= 2.30.
+
+endmenu # "ARMv8.4 architectural features"
+
+menu "ARMv8.5 architectural features"
+
+config AS_HAS_ARMV8_5
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.5-a)
+
+config ARM64_BTI
+	bool "Branch Target Identification support"
+	default y
+	help
+	  Branch Target Identification (part of the ARMv8.5 Extensions)
+	  provides a mechanism to limit the set of locations to which computed
+	  branch instructions such as BR or BLR can jump.
+
+	  To make use of BTI on CPUs that support it, say Y.
+
+	  BTI is intended to provide complementary protection to other control
+	  flow integrity protection mechanisms, such as the Pointer
+	  authentication mechanism provided as part of the ARMv8.3 Extensions.
+	  For this reason, it does not make sense to enable this option without
+	  also enabling support for pointer authentication.  Thus, when
+	  enabling this option you should also select ARM64_PTR_AUTH=y.
+
+	  Userspace binaries must also be specifically compiled to make use of
+	  this mechanism.  If you say N here or the hardware does not support
+	  BTI, such binaries can still run, but you get no additional
+	  enforcement of branch destinations.
+
+config ARM64_BTI_KERNEL
+	bool "Use Branch Target Identification for kernel"
+	default y
+	depends on ARM64_BTI
+	depends on ARM64_PTR_AUTH_KERNEL
+	depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697
+	depends on !CC_IS_GCC || GCC_VERSION >= 100100
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671
+	depends on !CC_IS_GCC
+	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
+	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_ARGS)
+	help
+	  Build the kernel with Branch Target Identification annotations
+	  and enable enforcement of this for kernel code. When this option
+	  is enabled and the system supports BTI all kernel code including
+	  modular code must have BTI enabled.
+
+config CC_HAS_BRANCH_PROT_PAC_RET_BTI
+	# GCC 9 or later, clang 8 or later
+	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf+bti)
+
+config ARM64_E0PD
+	bool "Enable support for E0PD"
+	default y
+	help
+	  E0PD (part of the ARMv8.5 extensions) allows us to ensure
+	  that EL0 accesses made via TTBR1 always fault in constant time,
+	  providing similar benefits to KASLR as those provided by KPTI, but
+	  with lower overhead and without disrupting legitimate access to
+	  kernel memory such as SPE.
+
+	  This option enables E0PD for TTBR1 where available.
+
+config ARM64_AS_HAS_MTE
+	# Initial support for MTE went in binutils 2.32.0, checked with
+	# ".arch armv8.5-a+memtag" below. However, this was incomplete
+	# as a late addition to the final architecture spec (LDGM/STGM)
+	# is only supported in the newer 2.32.x and 2.33 binutils
+	# versions, hence the extra "stgm" instruction check below.
+	def_bool $(as-instr,.arch armv8.5-a+memtag\nstgm xzr$(comma)[x0])
+
+config ARM64_MTE
+	bool "Memory Tagging Extension support"
+	default y
+	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
+	depends on AS_HAS_ARMV8_5
+	depends on AS_HAS_LSE_ATOMICS
+	# Required for tag checking in the uaccess routines
+	depends on ARM64_PAN
+	select ARCH_HAS_SUBPAGE_FAULTS
+	select ARCH_USES_HIGH_VMA_FLAGS
+	select ARCH_USES_PG_ARCH_X
+	help
+	  Memory Tagging (part of the ARMv8.5 Extensions) provides
+	  architectural support for run-time, always-on detection of
+	  various classes of memory error to aid with software debugging
+	  to eliminate vulnerabilities arising from memory-unsafe
+	  languages.
+
+	  This option enables the support for the Memory Tagging
+	  Extension at EL0 (i.e. for userspace).
+
+	  Selecting this option allows the feature to be detected at
+	  runtime. Any secondary CPU not implementing this feature will
+	  not be allowed a late bring-up.
+
+	  Userspace binaries that want to use this feature must
+	  explicitly opt in. The mechanism for the userspace is
+	  described in:
+
+	  Documentation/arch/arm64/memory-tagging-extension.rst.
+
+endmenu # "ARMv8.5 architectural features"
+
+menu "ARMv8.7 architectural features"
+
+config ARM64_EPAN
+	bool "Enable support for Enhanced Privileged Access Never (EPAN)"
+	default y
+	depends on ARM64_PAN
+	help
+	  Enhanced Privileged Access Never (EPAN) allows Privileged
+	  Access Never to be used with Execute-only mappings.
+
+	  The feature is detected at runtime, and will remain disabled
+	  if the cpu does not implement the feature.
+endmenu # "ARMv8.7 architectural features"
+
+config ARM64_SVE
+	bool "ARM Scalable Vector Extension support"
+	default y
+	help
+	  The Scalable Vector Extension (SVE) is an extension to the AArch64
+	  execution state which complements and extends the SIMD functionality
+	  of the base architecture to support much larger vectors and to enable
+	  additional vectorisation opportunities.
+
+	  To enable use of this extension on CPUs that implement it, say Y.
+
+	  On CPUs that support the SVE2 extensions, this option will enable
+	  those too.
+
+	  Note that for architectural reasons, firmware _must_ implement SVE
+	  support when running on SVE capable hardware.  The required support
+	  is present in:
+
+	    * version 1.5 and later of the ARM Trusted Firmware
+	    * the AArch64 boot wrapper since commit 5e1261e08abf
+	      ("bootwrapper: SVE: Enable SVE for EL2 and below").
+
+	  For other firmware implementations, consult the firmware documentation
+	  or vendor.
+
+	  If you need the kernel to boot on SVE-capable hardware with broken
+	  firmware, you may need to say N here until you get your firmware
+	  fixed.  Otherwise, you may experience firmware panics or lockups when
+	  booting the kernel.  If unsure and you are not observing these
+	  symptoms, you should assume that it is safe to say Y.
+
+config ARM64_SME
+	bool "ARM Scalable Matrix Extension support"
+	default y
+	depends on ARM64_SVE
+	help
+	  The Scalable Matrix Extension (SME) is an extension to the AArch64
+	  execution state which utilises a substantial subset of the SVE
+	  instruction set, together with the addition of new architectural
+	  register state capable of holding two dimensional matrix tiles to
+	  enable various matrix operations.
+
+config ARM64_PSEUDO_NMI
+	bool "Support for NMI-like interrupts"
+	select ARM_GIC_V3
+	help
+	  Adds support for mimicking Non-Maskable Interrupts through the use of
+	  GIC interrupt priority. This support requires version 3 or later of
+	  ARM GIC.
+
+	  This high priority configuration for interrupts needs to be
+	  explicitly enabled by setting the kernel parameter
+	  "irqchip.gicv3_pseudo_nmi" to 1.
+
+	  If unsure, say N
+
+if ARM64_PSEUDO_NMI
+config ARM64_DEBUG_PRIORITY_MASKING
+	bool "Debug interrupt priority masking"
+	help
+	  This adds runtime checks to functions enabling/disabling
+	  interrupts when using priority masking. The additional checks verify
+	  the validity of ICC_PMR_EL1 when calling concerned functions.
+
+	  If unsure, say N
+endif # ARM64_PSEUDO_NMI
+
+config RELOCATABLE
+	bool "Build a relocatable kernel image" if EXPERT
+	select ARCH_HAS_RELR
+	default y
+	help
+	  This builds the kernel as a Position Independent Executable (PIE),
+	  which retains all relocation metadata required to relocate the
+	  kernel binary at runtime to a different virtual address than the
+	  address it was linked at.
+	  Since AArch64 uses the RELA relocation format, this requires a
+	  relocation pass at runtime even if the kernel is loaded at the
+	  same address it was linked at.
+
+config RANDOMIZE_BASE
+	bool "Randomize the address of the kernel image"
+	select RELOCATABLE
+	help
+	  Randomizes the virtual address at which the kernel image is
+	  loaded, as a security feature that deters exploit attempts
+	  relying on knowledge of the location of kernel internals.
+
+	  It is the bootloader's job to provide entropy, by passing a
+	  random u64 value in /chosen/kaslr-seed at kernel entry.
+
+	  When booting via the UEFI stub, it will invoke the firmware's
+	  EFI_RNG_PROTOCOL implementation (if available) to supply entropy
+	  to the kernel proper. In addition, it will randomise the physical
+	  location of the kernel Image as well.
+
+	  If unsure, say N.
+
+config RANDOMIZE_MODULE_REGION_FULL
+	bool "Randomize the module region over a 2 GB range"
+	depends on RANDOMIZE_BASE
+	default y
+	help
+	  Randomizes the location of the module region inside a 2 GB window
+	  covering the core kernel. This way, it is less likely for modules
+	  to leak information about the location of core kernel data structures
+	  but it does imply that function calls between modules and the core
+	  kernel will need to be resolved via veneers in the module PLT.
+
+	  When this option is not set, the module region will be randomized over
+	  a limited range that contains the [_stext, _etext] interval of the
+	  core kernel, so branch relocations are almost always in range unless
+	  the region is exhausted. In this particular case of region
+	  exhaustion, modules might be able to fall back to a larger 2GB area.
+
+config CC_HAVE_STACKPROTECTOR_SYSREG
+	def_bool $(cc-option,-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	def_bool y
+	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_SYSREG
+
+config UNWIND_PATCH_PAC_INTO_SCS
+	bool "Enable shadow call stack dynamically using code patching"
+	# needs Clang with https://reviews.llvm.org/D111780 incorporated
+	depends on CC_IS_CLANG && CLANG_VERSION >= 150000
+	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
+	depends on SHADOW_CALL_STACK
+	select UNWIND_TABLES
+	select DYNAMIC_SCS
+
+endmenu # "Kernel Features"
+
+menu "Boot options"
+
+config ARM64_ACPI_PARKING_PROTOCOL
+	bool "Enable support for the ARM64 ACPI parking protocol"
+	depends on ACPI
+	help
+	  Enable support for the ARM64 ACPI parking protocol. If disabled
+	  the kernel will not allow booting through the ARM64 ACPI parking
+	  protocol even if the corresponding data is present in the ACPI
+	  MADT table.
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  Provide a set of default command-line options at build time by
+	  entering them here. As a minimum, you should specify the the
+	  root device (e.g. root=/dev/nfs).
+
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+	help
+	  Choose how the kernel will handle the provided default kernel
+	  command line string.
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+endchoice
+
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN
+	depends on KERNEL_MODE_NEON
+	select ARCH_SUPPORTS_ACPI
+	select LIBFDT
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_RUNTIME_WRAPPERS
+	select EFI_STUB
+	select EFI_GENERIC_STUB
+	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
+	default y
+	help
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+	  clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful on systems that have UEFI firmware.
+
+config DMI
+	bool "Enable support for SMBIOS (DMI) tables"
+	depends on EFI
+	default y
+	help
+	  This enables SMBIOS/DMI feature for systems.
+
+	  This option is only useful on systems that have UEFI firmware.
+	  However, even with this option, the resultant kernel should
+	  continue to boot on existing non-UEFI platforms.
+
+endmenu # "Boot options"
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool y
+	depends on CPU_PM
+
+config ARCH_HIBERNATION_HEADER
+	def_bool y
+	depends on HIBERNATION
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
+endmenu # "Power management options"
+
+menu "CPU Power Management"
+
+source "drivers/cpuidle/Kconfig"
+
+source "drivers/cpufreq/Kconfig"
+
+endmenu # "CPU Power Management"
+
+source "drivers/acpi/Kconfig"
+
+source "arch/arm64/kvm/Kconfig"
+
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
new file mode 100644
index 000000000..265c44610
--- /dev/null
+++ b/arch/arm64/Kconfig.debug
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config PID_IN_CONTEXTIDR
+	bool "Write the current PID to the CONTEXTIDR register"
+	help
+	  Enabling this option causes the kernel to write the current PID to
+	  the CONTEXTIDR register, at the expense of some additional
+	  instructions during context switch. Say Y here only if you are
+	  planning to use hardware trace tools with this kernel.
+
+config DEBUG_EFI
+	depends on EFI && DEBUG_INFO
+	bool "UEFI debugging"
+	help
+	  Enable this option to include EFI specific debugging features into
+	  the kernel that are only useful when using a debug build of the
+	  UEFI firmware
+
+config ARM64_RELOC_TEST
+	depends on m
+	tristate "Relocation testing module"
+
+source "drivers/hwtracing/coresight/Kconfig"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
new file mode 100644
index 000000000..606912019
--- /dev/null
+++ b/arch/arm64/Kconfig.platforms
@@ -0,0 +1,377 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Platform selection"
+
+config ARCH_ACTIONS
+	bool "Actions Semi Platforms"
+	select OWL_TIMER
+	select PINCTRL
+	help
+	  This enables support for the Actions Semiconductor S900 SoC family.
+
+config ARCH_SUNXI
+	bool "Allwinner sunxi 64-bit SoC Family"
+	select ARCH_HAS_RESET_CONTROLLER
+	select PINCTRL
+	select RESET_CONTROLLER
+	select SUN4I_TIMER
+	select SUN6I_R_INTC
+	select SUNXI_NMI_INTC
+	help
+	  This enables support for Allwinner sunxi based SoCs like the A64.
+
+config ARCH_ALPINE
+	bool "Annapurna Labs Alpine platform"
+	select ALPINE_MSI if PCI
+	help
+	  This enables support for the Annapurna Labs Alpine
+	  Soc family.
+
+config ARCH_APPLE
+	bool "Apple Silicon SoC family"
+	select APPLE_AIC
+	help
+	  This enables support for Apple's in-house ARM SoC family, starting
+	  with the Apple M1.
+
+menuconfig ARCH_BCM
+	bool "Broadcom SoC Support"
+
+if ARCH_BCM
+
+config ARCH_BCM2835
+	bool "Broadcom BCM2835 family"
+	select TIMER_OF
+	select GPIOLIB
+	select MFD_CORE
+	select PINCTRL
+	select PINCTRL_BCM2835
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_TIMER_SP804
+	help
+	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
+	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
+
+config ARCH_BCM_IPROC
+	bool "Broadcom iProc SoC Family"
+	select COMMON_CLK_IPROC
+	select GPIOLIB
+	select PINCTRL
+	help
+	  This enables support for Broadcom iProc based SoCs
+
+config ARCH_BCMBCA
+	bool "Broadcom Broadband Carrier Access (BCA) origin SoC"
+	select GPIOLIB
+	help
+	  Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
+	  BCA chipset.
+
+	  This enables support for Broadcom BCA ARM-based broadband chipsets,
+	  including the DSL, PON and Wireless family of chips.
+
+config ARCH_BRCMSTB
+	bool "Broadcom Set-Top-Box SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
+	select GENERIC_IRQ_CHIP
+	select PINCTRL
+	help
+	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
+
+endif
+
+config ARCH_BERLIN
+	bool "Marvell Berlin SoC Family"
+	select DW_APB_ICTL
+	select DW_APB_TIMER_OF
+	select GPIOLIB
+	select PINCTRL
+	help
+	  This enables support for Marvell Berlin SoC Family
+
+config ARCH_BITMAIN
+	bool "Bitmain SoC Platforms"
+	help
+	  This enables support for the Bitmain SoC Family.
+
+config ARCH_EXYNOS
+	bool "Samsung Exynos SoC family"
+	select COMMON_CLK_SAMSUNG
+	select CLKSRC_EXYNOS_MCT
+	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
+	select EXYNOS_PMU
+	select PINCTRL
+	select PINCTRL_EXYNOS
+	select PM_GENERIC_DOMAINS if PM
+	select SOC_SAMSUNG
+	help
+	  This enables support for ARMv8 based Samsung Exynos SoC family.
+
+config ARCH_SPARX5
+	bool "Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+config ARCH_K3
+	bool "Texas Instruments Inc. K3 multicore SoC architecture"
+	select PM_GENERIC_DOMAINS if PM
+	select MAILBOX
+	select SOC_TI
+	select TI_MESSAGE_MANAGER
+	select TI_SCI_PROTOCOL
+	select TI_SCI_INTR_IRQCHIP
+	select TI_SCI_INTA_IRQCHIP
+	select TI_K3_SOCINFO
+	help
+	  This enables support for Texas Instruments' K3 multicore SoC
+	  architecture.
+
+config ARCH_LG1K
+	bool "LG Electronics LG1K SoC Family"
+	help
+	  This enables support for LG Electronics LG1K SoC Family
+
+config ARCH_HISI
+	bool "Hisilicon SoC Family"
+	select ARM_TIMER_SP804
+	select HISILICON_IRQ_MBIGEN if PCI
+	select PINCTRL
+	help
+	  This enables support for Hisilicon ARMv8 SoC family
+
+config ARCH_KEEMBAY
+	bool "Keem Bay SoC"
+	help
+	  This enables support for Intel Movidius SoC code-named Keem Bay.
+
+config ARCH_MEDIATEK
+	bool "MediaTek SoC Family"
+	select ARM_GIC
+	select PINCTRL
+	select MTK_TIMER
+	help
+	  This enables support for MediaTek MT27xx, MT65xx, MT76xx
+	  & MT81xx ARMv8 SoCs
+
+config ARCH_MESON
+	bool "Amlogic Platforms"
+	help
+	  This enables support for the arm64 based Amlogic SoCs
+	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
+
+config ARCH_MVEBU
+	bool "Marvell EBU SoC Family"
+	select ARMADA_AP806_SYSCON
+	select ARMADA_CP110_SYSCON
+	select ARMADA_37XX_CLK
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
+	select MVEBU_GICP
+	select MVEBU_ICU
+	select MVEBU_ODMI
+	select MVEBU_PIC
+	select MVEBU_SEI
+	select OF_GPIO
+	select PINCTRL
+	select PINCTRL_ARMADA_37XX
+	select PINCTRL_ARMADA_AP806
+	select PINCTRL_ARMADA_CP110
+	select PINCTRL_AC5
+	help
+	  This enables support for Marvell EBU family, including:
+	   - Armada 3700 SoC Family
+	   - Armada 7K SoC Family
+	   - Armada 8K SoC Family
+	   - 98DX2530 SoC Family
+
+menuconfig ARCH_NXP
+	bool "NXP SoC support"
+
+if ARCH_NXP
+
+config ARCH_LAYERSCAPE
+	bool "Freescale Layerscape SoC family"
+	select EDAC_SUPPORT
+	help
+	  This enables support for the Freescale Layerscape SoC family.
+
+config ARCH_MXC
+	bool "NXP i.MX SoC family"
+	select ARM64_ERRATUM_843419
+	select ARM64_ERRATUM_845719 if COMPAT
+	select IMX_GPCV2
+	select IMX_GPCV2_PM_DOMAINS
+	select PM
+	select PM_GENERIC_DOMAINS
+	select SOC_BUS
+	select TIMER_IMX_SYS_CTR
+	help
+	  This enables support for the ARMv8 based SoCs in the
+	  NXP i.MX family.
+
+config ARCH_S32
+	bool "NXP S32 SoC Family"
+	help
+	  This enables support for the NXP S32 family of processors.
+
+endif
+
+config ARCH_MA35
+	bool "Nuvoton MA35 Architecture"
+	select GPIOLIB
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  This enables support for the ARMv8 based Nuvoton MA35 series SoCs.
+
+config ARCH_NPCM
+	bool "Nuvoton NPCM Architecture"
+	select PINCTRL
+	select GPIOLIB
+	select NPCM7XX_TIMER
+	select RESET_CONTROLLER
+	select MFD_SYSCON
+	help
+	  General support for NPCM8xx BMC (Arbel).
+	  Nuvoton NPCM8xx BMC based on the Cortex A35.
+
+config ARCH_QCOM
+	bool "Qualcomm Platforms"
+	select GPIOLIB
+	select PINCTRL
+	help
+	  This enables support for the ARMv8 based Qualcomm chipsets.
+
+config ARCH_REALTEK
+	bool "Realtek Platforms"
+	select RESET_CONTROLLER
+	help
+	  This enables support for the ARMv8 based Realtek chipsets,
+	  like the RTD1295.
+
+config ARCH_RENESAS
+	bool "Renesas SoC Platforms"
+	help
+	  This enables support for the ARMv8 based Renesas SoCs.
+
+config ARCH_ROCKCHIP
+	bool "Rockchip Platforms"
+	select ARCH_HAS_RESET_CONTROLLER
+	select PINCTRL
+	select PM
+	select ROCKCHIP_TIMER
+	help
+	  This enables support for the ARMv8 based Rockchip chipsets,
+	  like the RK3368.
+
+config ARCH_SEATTLE
+	bool "AMD Seattle SoC Family"
+	help
+	  This enables support for AMD Seattle SOC Family
+
+config ARCH_INTEL_SOCFPGA
+	bool "Intel's SoCFPGA ARMv8 Families"
+	help
+	  This enables support for Intel's SoCFPGA ARMv8 families:
+	  Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform,
+	  Agilex and eASIC N5X.
+
+config ARCH_STM32
+	bool "STMicroelectronics STM32 SoC Family"
+	select GPIOLIB
+	select PINCTRL
+	select PINCTRL_STM32MP257
+	select ARM_SMC_MBOX
+	select ARM_SCMI_PROTOCOL
+	select COMMON_CLK_SCMI
+	help
+	  This enables support for ARMv8 based STMicroelectronics
+	  STM32 family, including:
+		- STM32MP25:
+			- STM32MP251, STM32MP253, STM32MP255 and STM32MP257.
+
+config ARCH_SYNQUACER
+	bool "Socionext SynQuacer SoC Family"
+	select IRQ_FASTEOI_HIERARCHY_HANDLERS
+
+config ARCH_TEGRA
+	bool "NVIDIA Tegra SoC Family"
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_GIC_PM
+	select CLKSRC_MMIO
+	select TIMER_OF
+	select GPIOLIB
+	select PINCTRL
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RESET_CONTROLLER
+	help
+	  This enables support for the NVIDIA Tegra SoC family.
+
+config ARCH_TESLA_FSD
+	bool "Tesla platform"
+	depends on ARCH_EXYNOS
+	help
+	  Support for ARMv8 based Tesla platforms.
+
+config ARCH_SPRD
+	bool "Spreadtrum SoC platform"
+	help
+	  Support for Spreadtrum ARM based SoCs
+
+config ARCH_THUNDER
+	bool "Cavium Inc. Thunder SoC Family"
+	help
+	  This enables support for Cavium's Thunder Family of SoCs.
+
+config ARCH_THUNDER2
+	bool "Cavium ThunderX2 Server Processors"
+	select GPIOLIB
+	help
+	  This enables support for Cavium's ThunderX2 CN99XX family of
+	  server processors.
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoC Family"
+	select ARCH_HAS_RESET_CONTROLLER
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  This enables support for Socionext UniPhier SoC family.
+
+config ARCH_VEXPRESS
+	bool "ARMv8 software model (Versatile Express)"
+	select GPIOLIB
+	select PM
+	select PM_GENERIC_DOMAINS
+	help
+	  This enables support for the ARMv8 software model (Versatile
+	  Express).
+
+config ARCH_VISCONTI
+	bool "Toshiba Visconti SoC Family"
+	select PINCTRL
+	select PINCTRL_VISCONTI
+	help
+	  This enables support for Toshiba Visconti SoCs Family.
+
+config ARCH_XGENE
+	bool "AppliedMicro X-Gene SOC Family"
+	help
+	  This enables support for AppliedMicro X-Gene SOC Family
+
+config ARCH_ZYNQMP
+	bool "Xilinx ZynqMP Family"
+	help
+	  This enables support for Xilinx ZynqMP Family
+
+endmenu # "Platform selection"
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
new file mode 100644
index 000000000..26b8c7630
--- /dev/null
+++ b/arch/arm64/Makefile
@@ -0,0 +1,222 @@
+#
+# arch/arm64/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995-2001 by Russell King
+
+LDFLAGS_vmlinux	:=--no-undefined -X
+
+ifeq ($(CONFIG_RELOCATABLE), y)
+# Pass --no-apply-dynamic-relocs to restore pre-binutils-2.27 behaviour
+# for relative relocs, since this leads to better Image compression
+# with the relocation offsets always being zero.
+LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
+			$(call ld-option, --no-apply-dynamic-relocs)
+endif
+
+ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
+  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
+LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
+  endif
+endif
+
+cc_has_k_constraint := $(call try-run,echo				\
+	'int main(void) {						\
+		asm volatile("and w0, w0, %w0" :: "K" (4294967295));	\
+		return 0;						\
+	}' | $(CC) -S -x c -o "$$TMP" -,,-DCONFIG_CC_HAS_K_CONSTRAINT=1)
+
+ifeq ($(CONFIG_BROKEN_GAS_INST),y)
+$(warning Detected assembler with broken .inst; disassembly will be unreliable)
+endif
+
+KBUILD_CFLAGS	+= -mgeneral-regs-only	\
+		   $(compat_vdso) $(cc_has_k_constraint)
+KBUILD_CFLAGS	+= $(call cc-disable-warning, psabi)
+KBUILD_AFLAGS	+= $(compat_vdso)
+
+KBUILD_CFLAGS	+= $(call cc-option,-mabi=lp64)
+KBUILD_AFLAGS	+= $(call cc-option,-mabi=lp64)
+
+# Avoid generating .eh_frame* sections.
+ifneq ($(CONFIG_UNWIND_TABLES),y)
+KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
+KBUILD_AFLAGS	+= -fno-asynchronous-unwind-tables -fno-unwind-tables
+else
+KBUILD_CFLAGS	+= -fasynchronous-unwind-tables
+KBUILD_AFLAGS	+= -fasynchronous-unwind-tables
+endif
+
+ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
+prepare: stack_protector_prepare
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += -mstack-protector-guard=sysreg		  \
+				-mstack-protector-guard-reg=sp_el0	  \
+				-mstack-protector-guard-offset=$(shell	  \
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}' \
+					include/generated/asm-offsets.h))
+endif
+
+ifeq ($(CONFIG_ARM64_BTI_KERNEL),y)
+  KBUILD_CFLAGS += -mbranch-protection=pac-ret+bti
+else ifeq ($(CONFIG_ARM64_PTR_AUTH_KERNEL),y)
+  ifeq ($(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET),y)
+    KBUILD_CFLAGS += -mbranch-protection=pac-ret
+  else
+    KBUILD_CFLAGS += -msign-return-address=non-leaf
+  endif
+else
+  KBUILD_CFLAGS += $(call cc-option,-mbranch-protection=none)
+endif
+
+# Tell the assembler to support instructions from the latest target
+# architecture.
+#
+# For non-integrated assemblers we'll pass this on the command line, and for
+# integrated assemblers we'll define ARM64_ASM_ARCH and ARM64_ASM_PREAMBLE for
+# inline usage.
+#
+# We cannot pass the same arch flag to the compiler as this would allow it to
+# freely generate instructions which are not supported by earlier architecture
+# versions, which would prevent a single kernel image from working on earlier
+# hardware.
+ifeq ($(CONFIG_AS_HAS_ARMV8_5), y)
+  asm-arch := armv8.5-a
+else ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+  asm-arch := armv8.4-a
+else ifeq ($(CONFIG_AS_HAS_ARMV8_3), y)
+  asm-arch := armv8.3-a
+else ifeq ($(CONFIG_AS_HAS_ARMV8_2), y)
+  asm-arch := armv8.2-a
+endif
+
+ifdef asm-arch
+KBUILD_CFLAGS	+= -Wa,-march=$(asm-arch) \
+		   -DARM64_ASM_ARCH='"$(asm-arch)"'
+endif
+
+ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
+KBUILD_CFLAGS	+= -ffixed-x18
+endif
+
+ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
+KBUILD_CPPFLAGS	+= -mbig-endian
+CHECKFLAGS	+= -D__AARCH64EB__
+# Prefer the baremetal ELF build target, but not all toolchains include
+# it so fall back to the standard linux version if needed.
+KBUILD_LDFLAGS	+= -EB $(call ld-option, -maarch64elfb, -maarch64linuxb -z norelro)
+UTS_MACHINE	:= aarch64_be
+else
+KBUILD_CPPFLAGS	+= -mlittle-endian
+CHECKFLAGS	+= -D__AARCH64EL__
+# Same as above, prefer ELF but fall back to linux target if needed.
+KBUILD_LDFLAGS	+= -EL $(call ld-option, -maarch64elf, -maarch64linux -z norelro)
+UTS_MACHINE	:= aarch64
+endif
+
+ifeq ($(CONFIG_LD_IS_LLD), y)
+KBUILD_LDFLAGS	+= -z norelro
+endif
+
+CHECKFLAGS	+= -D__aarch64__
+
+ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS),y)
+  KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
+  CC_FLAGS_FTRACE := -fpatchable-function-entry=4,2
+else ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_ARGS),y)
+  KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
+  CC_FLAGS_FTRACE := -fpatchable-function-entry=2
+endif
+
+ifeq ($(CONFIG_KASAN_SW_TAGS), y)
+KASAN_SHADOW_SCALE_SHIFT := 4
+else ifeq ($(CONFIG_KASAN_GENERIC), y)
+KASAN_SHADOW_SCALE_SHIFT := 3
+endif
+
+KBUILD_CFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
+KBUILD_CPPFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
+KBUILD_AFLAGS += -DKASAN_SHADOW_SCALE_SHIFT=$(KASAN_SHADOW_SCALE_SHIFT)
+
+libs-y		:= arch/arm64/lib/ $(libs-y)
+libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
+
+# Default target when executing plain make
+boot		:= arch/arm64/boot
+
+ifeq ($(CONFIG_EFI_ZBOOT),)
+KBUILD_IMAGE	:= $(boot)/Image.gz
+else
+KBUILD_IMAGE	:= $(boot)/vmlinuz.efi
+endif
+
+all:	$(notdir $(KBUILD_IMAGE))
+
+vmlinuz.efi: Image
+Image vmlinuz.efi: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+Image.%: Image
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+install: KBUILD_IMAGE := $(boot)/Image
+install zinstall:
+	$(call cmd,install)
+
+PHONY += vdso_install
+vdso_install:
+	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso $@
+	$(if $(CONFIG_COMPAT_VDSO), \
+		$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 $@)
+
+archprepare:
+	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
+ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
+  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
+	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
+  endif
+endif
+ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
+  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
+	@echo "warning: LSE atomics not supported by binutils" >&2
+  endif
+endif
+
+ifeq ($(KBUILD_EXTMOD),)
+# We need to generate vdso-offsets.h before compiling certain files in kernel/.
+# In order to do that, we should use the archprepare target, but we can't since
+# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
+# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
+# Therefore we need to generate the header after prepare0 has been made, hence
+# this hack.
+prepare: vdso_prepare
+vdso_prepare: prepare0
+	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso \
+	include/generated/vdso-offsets.h arch/arm64/kernel/vdso/vdso.so
+ifdef CONFIG_COMPAT_VDSO
+	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso32 \
+	include/generated/vdso32-offsets.h arch/arm64/kernel/vdso32/vdso.so
+endif
+endif
+
+include $(srctree)/scripts/Makefile.defconf
+
+PHONY += virtconfig
+virtconfig:
+	$(call merge_into_defconfig_override,defconfig,virt)
+
+define archhelp
+  echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
+  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
+  echo  '  install       - Install uncompressed kernel'
+  echo  '  zinstall      - Install compressed kernel'
+  echo  '                  Install using (your) ~/bin/installkernel or'
+  echo  '                  (distribution) /sbin/installkernel or'
+  echo  '                  install to $$(INSTALL_PATH) and run lilo'
+endef
diff --git a/arch/arm64/boot/.gitignore b/arch/arm64/boot/.gitignore
new file mode 100644
index 000000000..af5dc61f8
--- /dev/null
+++ b/arch/arm64/boot/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+Image
+Image.gz
+vmlinuz*
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
new file mode 100644
index 000000000..1761f5972
--- /dev/null
+++ b/arch/arm64/boot/Makefile
@@ -0,0 +1,50 @@
+#
+# arch/arm64/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2012, ARM Ltd.
+# Author: Will Deacon <will.deacon@arm.com>
+#
+# Based on the ia64 boot/Makefile.
+#
+
+OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+
+targets := Image Image.bz2 Image.gz Image.lz4 Image.lzma Image.lzo Image.zst
+
+$(obj)/Image: vmlinux FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/Image.bz2: $(obj)/Image FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/Image.gz: $(obj)/Image FORCE
+	$(call if_changed,gzip)
+
+$(obj)/Image.lz4: $(obj)/Image FORCE
+	$(call if_changed,lz4)
+
+$(obj)/Image.lzma: $(obj)/Image FORCE
+	$(call if_changed,lzma)
+
+$(obj)/Image.lzo: $(obj)/Image FORCE
+	$(call if_changed,lzo)
+
+$(obj)/Image.zst: $(obj)/Image FORCE
+	$(call if_changed,zstd)
+
+EFI_ZBOOT_PAYLOAD	:= Image
+EFI_ZBOOT_BFD_TARGET	:= elf64-littleaarch64
+EFI_ZBOOT_MACH_TYPE	:= ARM64
+EFI_ZBOOT_FORWARD_CFI	:= $(CONFIG_ARM64_BTI_KERNEL)
+
+EFI_ZBOOT_OBJCOPY_FLAGS	= --add-symbol zboot_code_size=0x$(shell \
+				$(NM) vmlinux|grep _kernel_codesize|cut -d' ' -f1)
+
+include $(srctree)/drivers/firmware/efi/libstub/Makefile.zboot
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
new file mode 100644
index 000000000..30dd6347a
--- /dev/null
+++ b/arch/arm64/boot/dts/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-y += actions
+subdir-y += allwinner
+subdir-y += altera
+subdir-y += amazon
+subdir-y += amd
+subdir-y += amlogic
+subdir-y += apm
+subdir-y += apple
+subdir-y += arm
+subdir-y += bitmain
+subdir-y += broadcom
+subdir-y += cavium
+subdir-y += exynos
+subdir-y += freescale
+subdir-y += hisilicon
+subdir-y += intel
+subdir-y += lg
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += socionext
+subdir-y += sprd
+subdir-y += st
+subdir-y += synaptics
+subdir-y += tesla
+subdir-y += ti
+subdir-y += toshiba
+subdir-y += xilinx
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
new file mode 100644
index 000000000..b57fd2372
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
+
+dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
new file mode 100644
index 000000000..63e375cd9
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s700.dtsi"
+
+/ {
+	compatible = "cubietech,cubieboard7", "actions,s700";
+	model = "CubieBoard7";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	memory@1,e0000000 {
+		device_type = "memory";
+		reg = <0x1 0xe0000000 0x0 0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+&pinctrl {
+	i2c0_default: i2c0_default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1_default {
+		pinmux {
+			groups = "i2c1_dummy";
+			function = "i2c1";
+		};
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2_default {
+		pinmux {
+			groups = "i2c2_dummy";
+			function = "i2c2";
+		};
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
new file mode 100644
index 000000000..2c78caebf
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s700.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s700-cmu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s700-powergate.h>
+#include <dt-bindings/reset/actions,s700-reset.h>
+
+/ {
+	compatible = "actions,s700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@e0168000 {
+			compatible = "actions,s700-cmu";
+			reg = <0x0 0xe0168000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0174000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0178000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e017c000 {
+			compatible = "actions,s700-i2c";
+			reg = <0 0xe017c000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e01b0100 {
+			compatible = "actions,s700-sps";
+			reg = <0x0 0xe01b0100 0x0 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		timer: timer@e024c000 {
+			compatible = "actions,s700-timer";
+			reg = <0x0 0xe024c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s700-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x100>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 136>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@e0230000 {
+			compatible = "actions,s700-dma";
+			reg = <0x0 0xe0230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <10>;
+			dma-requests = <44>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S700_PD_DMA>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
new file mode 100644
index 000000000..59291e0ea
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "s900.dtsi"
+
+/ {
+	compatible = "ucrobotics,bubblegum-96", "actions,s900";
+	model = "Bubblegum-96";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	vcc_3v1: vcc-3v1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+		regulator-always-on;
+	};
+
+	/* Fixed regulator used in the absence of PMIC */
+	sd_vcc: sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.1V";
+		regulator-min-microvolt = <3100000>;
+		regulator-max-microvolt = <3100000>;
+		regulator-always-on;
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+	gpio-line-names =
+		"GPIO-A", /* GPIO_0, LSEC pin 23 */
+		"GPIO-B", /* GPIO_1, LSEC pin 24 */
+		"GPIO-C", /* GPIO_2, LSEC pin 25 */
+		"GPIO-D", /* GPIO_3, LSEC pin 26 */
+		"GPIO-E", /* GPIO_4, LSEC pin 27 */
+		"GPIO-F", /* GPIO_5, LSEC pin 28 */
+		"GPIO-G", /* GPIO_6, LSEC pin 29 */
+		"GPIO-H", /* GPIO_7, LSEC pin 30 */
+		"GPIO-I", /* GPIO_8, LSEC pin 31 */
+		"GPIO-J", /* GPIO_9, LSEC pin 32 */
+		"NC", /* GPIO_10 */
+		"NC", /* GPIO_11 */
+		"SIRQ2_1V8", /* GPIO_12 */
+		"PCM0_OUT", /* GPIO_13 */
+		"WIFI_LED", /* GPIO_14 */
+		"PCM0_SYNC", /* GPIO_15 */
+		"PCM0_CLK", /* GPIO_16 */
+		"PCM0_IN", /* GPIO_17 */
+		"BT_LED", /* GPIO_18 */
+		"LED0", /* GPIO_19 */
+		"LED1", /* GPIO_20 */
+		"JTAG_TCK", /* GPIO_21 */
+		"JTAG_TMS", /* GPIO_22 */
+		"JTAG_TDI", /* GPIO_23 */
+		"JTAG_TDO", /* GPIO_24 */
+		"[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+		"NC", /* GPIO_26 */
+		"[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+		"SD0_D0", /* GPIO_28 */
+		"SD0_D1", /* GPIO_29 */
+		"SD0_D2", /* GPIO_30 */
+		"SD0_D3", /* GPIO_31 */
+		"SD1_D0", /* GPIO_32 */
+		"SD1_D1", /* GPIO_33 */
+		"SD1_D2", /* GPIO_34 */
+		"SD1_D3", /* GPIO_35 */
+		"SD0_CMD", /* GPIO_36 */
+		"SD0_CLK", /* GPIO_37 */
+		"SD1_CMD", /* GPIO_38 */
+		"SD1_CLK", /* GPIO_39 */
+		"SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+		"SPI0_CS", /* GPIO_41, LSEC pin 12 */
+		"SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+		"SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+		"I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+		"I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+		"UART0_RX", /* GPIO_46, LSEC pin 7 */
+		"UART0_TX", /* GPIO_47, LSEC pin 5 */
+		"UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+		"UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+		"I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+		"I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+		"I2C0_SCLK", /* GPIO_52 */
+		"I2C0_SDATA", /* GPIO_53 */
+		"I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+		"I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+		"I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+		"I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+		"CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+		"CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+		"CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+		"CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+		"CSI0_CN", /* GPIO_62, HSEC pin 4 */
+		"CSI0_CP", /* GPIO_63, HSEC pin 2 */
+		"CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+		"CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+		"CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+		"CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+		"[CLK0]", /* GPIO_68, HSEC pin 15 */
+		"CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+		"CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+		"CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+		"CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+		"CSI1_CN", /* GPIO_73, HSEC pin 56 */
+		"CSI1_CP", /* GPIO_74, HSEC pin 54 */
+		"[CLK1]", /* GPIO_75, HSEC pin 17 */
+		"[GPIOD0]", /* GPIO_76 */
+		"[GPIOD1]", /* GPIO_77 */
+		"BT_RST_N", /* GPIO_78 */
+		"EXT_DC_EN", /* GPIO_79 */
+		"[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+		"[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+		"[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+		"WAKE_BT", /* GPIO_84 */
+		"WL_REG_ON", /* GPIO_85 */
+		"NC", /* GPIO_86 */
+		"NC", /* GPIO_87 */
+		"NC", /* GPIO_88 */
+		"NC", /* GPIO_89 */
+		"NC", /* GPIO_90 */
+		"WIFI_WAKE", /* GPIO_91 */
+		"BT_WAKE", /* GPIO_92 */
+		"NC", /* GPIO_93 */
+		"OTG_EN2", /* GPIO_94 */
+		"OTG_EN", /* GPIO_95 */
+		"DSI_DP3", /* GPIO_96, HSEC pin 45 */
+		"DSI_DN3", /* GPIO_97, HSEC pin 47 */
+		"DSI_DP1", /* GPIO_98, HSEC pin 33 */
+		"DSI_DN1", /* GPIO_99, HSEC pin 35 */
+		"DSI_CP", /* GPIO_100, HSEC pin 21 */
+		"DSI_CN", /* GPIO_101, HSEC pin 23 */
+		"DSI_DP0", /* GPIO_102, HSEC pin 27 */
+		"DSI_DN0", /* GPIO_103, HSEC pin 29 */
+		"DSI_DP2", /* GPIO_104, HSEC pin 39 */
+		"DSI_DN2", /* GPIO_105, HSEC pin 41 */
+		"N0_D0", /* GPIO_106 */
+		"N0_D1", /* GPIO_107 */
+		"N0_D2", /* GPIO_108 */
+		"N0_D3", /* GPIO_109 */
+		"N0_D4", /* GPIO_110 */
+		"N0_D5", /* GPIO_111 */
+		"N0_D6", /* GPIO_112 */
+		"N0_D7", /* GPIO_113 */
+		"N0_DQS", /* GPIO_114 */
+		"N0_DQSN", /* GPIO_115 */
+		"NC", /* GPIO_116 */
+		"NC", /* GPIO_117 */
+		"NC", /* GPIO_118 */
+		"N0_CEB1", /* GPIO_119 */
+		"CARD_DT", /* GPIO_120 */
+		"N0_CEB3", /* GPIO_121 */
+		"SD_DAT0", /* GPIO_122, HSEC pin 1 */
+		"SD_DAT1", /* GPIO_123, HSEC pin 3 */
+		"SD_DAT2", /* GPIO_124, HSEC pin 5 */
+		"SD_DAT3", /* GPIO_125, HSEC pin 7 */
+		"NC", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+		"[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+		"NC", /* GPIO_130 */
+		"SD_CMD", /* GPIO_131 */
+		"GPIO-L", /* GPIO_132, LSEC pin 34 */
+		"GPIO-K", /* GPIO_133, LSEC pin 33 */
+		"NC", /* GPIO_134 */
+		"SD_SCLK", /* GPIO_135 */
+		"NC", /* GPIO_136 */
+		"JTAG_TRST", /* GPIO_137 */
+		"I2C3_SCLK", /* GPIO_138 */
+		"LED2", /* GPIO_139 */
+		"LED3", /* GPIO_140 */
+		"I2C3_SDATA", /* GPIO_141 */
+		"UART3_RX", /* GPIO_142 */
+		"UART3_TX", /* GPIO_143 */
+		"UART3_RTSB", /* GPIO_144 */
+		"UART3_CTSB"; /* GPIO_145 */
+
+	i2c0_default: i2c0-default {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_default: i2c1-default {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_default: i2c2-default {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default: mmc0_default {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+	};
+
+	mmc2_default: mmc2_default {
+		pinmux {
+			groups = "nand0_d0_ceb3_mfp";
+			function = "sd2";
+		};
+	};
+};
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_default>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
+/* eMMC */
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_default>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	bus-width = <8>;
+	vmmc-supply = <&vcc_3v1>;
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
new file mode 100644
index 000000000..eb35cf78a
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s900-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/actions,s900-reset.h>
+
+/ {
+	compatible = "actions,s900";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@1f000000 {
+			reg = <0x0 0x1f000000 0x0 0x1000000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	diff24M: diff24M {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@e00f1000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xe00f1000 0x0 0x1000>,
+			      <0x0 0xe00f2000 0x0 0x2000>,
+			      <0x0 0xe00f4000 0x0 0x2000>,
+			      <0x0 0xe00f6000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		uart0: serial@e0120000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0120000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART0>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@e0122000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0122000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART1>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@e0124000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0124000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART2>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@e0126000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0126000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART3>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart4: serial@e0128000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe0128000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart5: serial@e012a000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012a000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART5>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart6: serial@e012c000 {
+			compatible = "actions,s900-uart", "actions,owl-uart";
+			reg = <0x0 0xe012c000 0x0 0x2000>;
+			clocks = <&cmu CLK_UART6>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sps: power-controller@e012e000 {
+			compatible = "actions,s900-sps";
+			reg = <0x0 0xe012e000 0x0 0x2000>;
+			#power-domain-cells = <1>;
+		};
+
+		cmu: clock-controller@e0160000 {
+			compatible = "actions,s900-cmu";
+			reg = <0x0 0xe0160000 0x0 0x1000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@e0170000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0170000 0 0x1000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e0172000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0172000 0 0x1000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e0174000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0174000 0 0x1000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e0176000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0176000 0 0x1000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e0178000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe0178000 0 0x1000>;
+			clocks = <&cmu CLK_I2C4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e017a000 {
+			compatible = "actions,s900-i2c";
+			reg = <0 0xe017a000 0 0x1000>;
+			clocks = <&cmu CLK_I2C5>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@e01b0000 {
+			compatible = "actions,s900-pinctrl";
+			reg = <0x0 0xe01b0000 0x0 0x1000>;
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer: timer@e0228000 {
+			compatible = "actions,s900-timer";
+			reg = <0x0 0xe0228000 0x0 0x8000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "timer1";
+		};
+
+		dma: dma-controller@e0260000 {
+			compatible = "actions,s900-dma";
+			reg = <0x0 0xe0260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+		};
+
+		mmc0: mmc@e0330000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0330000 0x0 0x4000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@e0334000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0334000 0x0 0x4000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@e0338000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe0338000 0x0 0x4000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc3: mmc@e033c000 {
+			compatible = "actions,owl-mmc";
+			reg = <0x0 0xe033c000 0x0 0x4000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD3>;
+			resets = <&cmu RESET_SD3>;
+			dmas = <&dma 46>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000..3b0ad5406
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino-emmc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-beelink-gs1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
new file mode 100644
index 000000000..a6b4b87f1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+
+/*
+ * AXP803 Integrated Power Management Chip
+ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
+ */
+
+&axp803 {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp803-ac-power-supply",
+			     "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp803-adc", "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp803-gpio", "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp803-battery-power-supply",
+			     "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dcdc6: dcdc6 {
+			regulator-name = "dcdc6";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_fldo1: fldo1 {
+			regulator-name = "fldo1";
+		};
+
+		reg_fldo2: fldo2 {
+			regulator-name = "fldo2";
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			regulator-name = "ldo-io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			regulator-name = "ldo-io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc-ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp803-usb-power-supply",
+			     "x-powers,axp813-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
new file mode 100644
index 000000000..f5c5c1464
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a100.dtsi"
+
+/{
+	model = "Allwinner A100 Perf1";
+	compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_dldo2>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo1>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo3>;
+	 */
+};
+
+&r_i2c0 {
+	status = "okay";
+
+	axp803: pmic@34 {
+		compatible = "x-powers,axp803";
+		reg = <0x34>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dram-1";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb-pl";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io-usb-pd-emmc-nand-card";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	/*
+	 * FIXME: update min and max before support dvfs.
+	 */
+	regulator-min-microvolt = <500000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <950000>;
+	regulator-max-microvolt = <950000>;
+	regulator-name = "vdd-sys-usb-dram";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram-2";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pg-dcxo-wifi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe-csi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "ldo-avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avcc-csi";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pc-lvds-csi-efuse-emmc-nand";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-lcd";
+};
+
+&reg_fldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <900000>;
+	regulator-name = "vdd-cpus-usb";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
new file mode 100644
index 000000000..a3dccf193
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Yangtao Li <frank@allwinnertech.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	dcxo24M: dcxo24M-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "dcxo24M";
+		#clock-cells = <0>;
+	};
+
+	iosc: internal-osc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-accuracy = <300000000>;
+		clock-output-names = "iosc";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "osc32k";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x3fffffff>;
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-a100-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-a100-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			resets = <&ccu RST_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <52>;
+			#dma-cells = <1>;
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
+			      <0x03024000 0x2000>, <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		efuse@3006000 {
+			compatible = "allwinner,sun50i-a100-sid",
+				     "allwinner,sun50i-a64-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: calib@14 {
+				reg = <0x14 8>;
+			};
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-a100-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB9", "PB10";
+				function = "uart0";
+			};
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			dmas = <&dma 43>, <&dma 43>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			dmas = <&dma 44>, <&dma 44>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			dmas = <&dma 45>, <&dma 45>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002c00 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			dmas = <&dma 46>, <&dma 46>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-a100-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-a100-r-ccu";
+			reg = <0x07010000 0x300>;
+			clocks = <&dcxo24M>, <&osc32k>, <&iosc>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@7010320 {
+			compatible = "allwinner,sun50i-a100-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x07010320 0xc>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-a100-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&dcxo24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c0_pins: r-i2c0-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c0";
+			};
+
+			r_i2c1_pins: r-i2c1-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c1";
+			};
+		};
+
+		r_uart: serial@7080000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07080000 0x400>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_R_APB2_UART>;
+			resets = <&r_ccu RST_R_APB2_UART>;
+			status = "disabled";
+		};
+
+		r_i2c0: i2c@7081400 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C0>;
+			resets = <&r_ccu RST_R_APB2_I2C0>;
+			dmas = <&dma 50>, <&dma 50>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_i2c1: i2c@7081800 {
+			compatible = "allwinner,sun50i-a100-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081800 0x400>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C1>;
+			resets = <&r_ccu RST_R_APB2_I2C1>;
+			dmas = <&dma 51>, <&dma 51>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
new file mode 100644
index 000000000..8233582f6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Amarula A64-Relic";
+	compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_aldo1>;
+			DOVDD-supply = <&reg_dldo3>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	sensor@48 {
+		compatible = "st,stlm75";
+		reg = <0x48>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt5663";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_ldo_io0>;			/* VCC-CTP: GPIO0-LDO */
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH8 */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	/*
+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
+	 */
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-ctp";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
new file mode 100644
index 000000000..e6d5bc0f7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi-M64";
+	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bananapi-m64:red:pwr";
+			gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "bananapi-m64:green:user";
+			gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
+		};
+
+		led-2 {
+			label = "bananapi-m64:blue:user";
+			gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	/*
+	 * This regulator also drives the PE pingroup GPIOs,
+	 * which also controls two LEDs.
+	 */
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "afvcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	/*
+	 * This regulator also indirectly drives the PD pingroup GPIOs,
+	 * which also controls the power LED.
+	 */
+	regulator-always-on;
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Microphone Jack",
+				    "Microphone", "Onboard Microphone";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"MIC2", "Microphone Jack",
+			"Onboard Microphone", "MBIAS",
+			"MIC1", "Onboard Microphone";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo4>;
+		device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
new file mode 100644
index 000000000..e39db51eb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com>
+ */
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
new file mode 100644
index 000000000..0af6dcdf7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi A64";
+	compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "nanopi-a64:blue:status";
+			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+/* i2c1 connected with gpio headers like pine64, bananapi */
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8189etv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pg-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
new file mode 100644
index 000000000..577f9e1d0
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Oceanic Systems (UK) Ltd.
+// Copyright (C) 2019 Amarula Solutions B.V.
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "Oceanic 5205 5inMFD";
+	compatible = "oceanic,5205-5inmfd", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	allwinner,tx-delay-ps = <600>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		AVDD28-supply = <&reg_ldo_io0>;			/* VDD_CTP: GPIO0-LDO */
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH11 */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vdd-ctp";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
new file mode 100644
index 000000000..efb20846d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com>
+// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org>
+
+#include "sun50i-a64-olinuxino.dts"
+
+/ {
+	model = "Olimex A64-Olinuxino-eMMC";
+	compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
new file mode 100644
index 000000000..bfb806cf6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Olimex A64-Olinuxino";
+	compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "a64-olinuxino:red:user";
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdc1>;
+	allwinner,tx-delay-ps = <600>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_dldo4>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&pio {
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;	/* set N_VBUSEN as output pin */
+	};
+};
+
+/* VCC-PL is powered by aldo2 but we cannot add it as the RSB */
+/* interface used to talk to the PMIC in on the PL pins */
+/* &r_pio { */
+/*	vcc-pl-supply = <&reg_aldo2>; */
+/* }; */
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
+		    "Microphone", "Microphone Jack Right",
+		    "Headphone", "Headphone Jack";
+	simple-audio-card,routing = "Left DAC", "DACL",
+		    "Right DAC", "DACR",
+		    "Headphone Jack", "HP",
+		    "ADCL", "Left ADC",
+		    "ADCR", "Right ADC",
+		    "Microphone Jack Left", "MBIAS",
+		    "MIC1", "Microphone Jack Left",
+		    "Microphone Jack Right", "MBIAS",
+		    "MIC2", "Microphone Jack Right";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
new file mode 100644
index 000000000..4f8529d5a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Win/Win Plus";
+	compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:status";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "afvcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Microphone Jack",
+				    "Microphone", "Onboard Microphone";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"MIC2", "Microphone Jack",
+			"Onboard Microphone", "MBIAS",
+			"MIC1", "Onboard Microphone";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		status = "okay";
+	};
+};
+
+/* On debug connector */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo2>;
+		vddio-supply = <&reg_dldo4>;
+		device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+		shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+	};
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
new file mode 100644
index 000000000..596a25907
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2018 ARM Ltd.
+
+#include <dt-bindings/leds/common.h>
+#include "sun50i-a64-sopine-baseboard.dts"
+
+/ {
+	model = "Pine64 LTS";
+	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
+		     "allwinner,sun50i-a64";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		};
+	};
+};
+
+&mmc0 {
+	broken-cd;		/* card detect is broken on *some* boards */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
new file mode 100644
index 000000000..b54099b65
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+#include "sun50i-a64-pine64.dts"
+
+/ {
+	model = "Pine64+";
+	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
+
+	/* TODO: Camera, touchscreen, etc. */
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
new file mode 100644
index 000000000..2accb5ddf
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine64";
+	compatible = "pine64,pine64", "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ext_rmii_phy1>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mdio {
+	ext_rmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-phy";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+/*
+ * The DRAM chips used by Pine64 boards are DDR3L-compatible, so they can
+ * work at 1.35V with less power consumption.
+ * As AXP803 DCDC5 cannot reach 1.35V accurately, use 1.36V instead.
+ */
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+/* On Euler connector */
+&spdif {
+	status = "disabled";
+};
+
+/* On Exp and Euler connectors */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "disabled";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
new file mode 100644
index 000000000..50ed2e9f1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Pinebook";
+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&reg_vbklt>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	panel_edp: panel-edp {
+		compatible = "neweast,wjfh116008a";
+		backlight = <&backlight>;
+		power-supply = <&reg_dc1sw>;
+
+		port {
+			panel_edp_in: endpoint {
+				remote-endpoint = <&anx6345_out_edp>;
+			};
+		};
+	};
+
+	reg_vbklt: vbklt {
+		compatible = "regulator-fixed";
+		regulator-name = "vbklt";
+		regulator-min-microvolt = <18000000>;
+		regulator-max-microvolt = <18000000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		VCC-supply = <&reg_vcc5v0>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mixer0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	max-frequency = <200000000>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_eldo1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_eldo1>;
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pl89_pins>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_fldo1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			anx6345_in: port@0 {
+				reg = <0>;
+				anx6345_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+
+			anx6345_out: port@1 {
+				reg = <1>;
+				anx6345_out_edp: endpoint {
+					remote-endpoint = <&panel_edp_in>;
+				};
+			};
+		};
+	};
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-edp";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_lcd {
+	panel-supply = <&reg_dc1sw>;
+	dvdd25-supply = <&reg_dldo2>;
+	dvdd12-supply = <&reg_fldo1>;
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint {
+		remote-endpoint = <&anx6345_in_tcon0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "host";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
new file mode 100644
index 000000000..219f720b8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Developer Batch (1.0)";
+	compatible = "pine64,pinephone-1.0", "pine64,pinephone", "allwinner,sun50i-a64";
+};
+
+&codec_analog {
+	allwinner,internal-bias-resistor;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+	flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
new file mode 100644
index 000000000..723af64a9
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone Braveheart (1.1)";
+	compatible = "pine64,pinephone-1.1", "pine64,pinephone", "allwinner,sun50i-a64";
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since
+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+	 * being off is around 20%. Duty cycle for the lowest brightness level
+	 * also varries quite a bit between individual boards, so the lowest
+	 * value here was chosen as a safe default.
+	 */
+	brightness-levels = <
+		774  793  814  842
+		882  935  1003 1088
+		1192 1316 1462 1633
+		1830 2054 2309 2596
+		2916 3271 3664 4096>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <400>;
+};
+
+&codec_analog {
+	allwinner,internal-bias-resistor;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
new file mode 100644
index 000000000..4e7e237cb
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone (1.2)";
+	compatible = "pine64,pinephone-1.2", "pine64,pinephone", "allwinner,sun50i-a64";
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since 1.0,
+	 * and the lowest PWM duty cycle that doesn't lead to backlight being off
+	 * is around 10%. Duty cycle for the lowest brightness level also varries
+	 * quite a bit between individual boards, so the lowest value here was
+	 * chosen as a safe default.
+	 */
+	brightness-levels = <
+		5000 5248 5506 5858 6345
+		6987 7805 8823 10062 11543
+		13287 15317 17654 20319 23336
+		26724 30505 34702 39335 44427
+		50000
+	>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <500>;
+};
+
+&lis3mdl {
+	/*
+	 * Board revision 1.2 fixed routing of the interrupt to DRDY pin,
+	 * enable interrupts.
+	 */
+	interrupt-parent = <&pio>;
+	interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
+};
+
+&mmc1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+};
+
+&sgm3140 {
+	enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+	flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
new file mode 100644
index 000000000..87847116a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+// Copyright (C) 2020 Martijn Braam <martijn@brixit.nl>
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		ethernet0 = &rtl8723cs;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		power-supply = <&reg_ps>;
+		/* Backlight configuration differs per PinePhone revision. */
+	};
+
+	bt_sco_codec: bt-sco-codec {
+		#sound-dai-cells = <1>;
+		compatible = "linux,bt-sco";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+		};
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+		};
+
+		led-2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
+		};
+	};
+
+	reg_ps: ps-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ps";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	reg_vbat_wifi: vbat-wifi {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vbat-wifi";
+	};
+
+	sgm3140: led-controller {
+		compatible = "sgmicro,sgm3140";
+		vin-supply = <&reg_dcdc1>;
+
+		sgm3140_flash: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+		vcc-supply = <&reg_dcdc1>;
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&aif3_pins>;
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "xingbangda,xbd599";
+		reg = <0>;
+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+		iovcc-supply = <&reg_dldo2>;
+		vcc-supply = <&reg_ldo_io0>;
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt917s";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		AVDD28-supply = <&reg_ldo_io0>;
+		VDDIO-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* Magnetometer */
+	lis3mdl: magnetometer@1e {
+		compatible = "st,lis3mdl-magn";
+		reg = <0x1e>;
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+
+	/* Light/proximity sensor */
+	light-sensor@48 {
+		compatible = "sensortek,stk3311";
+		reg = <0x48>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
+	};
+
+	/* Accelerometer/gyroscope */
+	accelerometer@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
+		vdd-supply = <&reg_dldo1>;
+		vddio-supply = <&reg_dldo1>;
+	};
+};
+
+/* Connected to pogo pins (external spring based pinheader for user addons) */
+&i2c2 {
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	wakeup-source;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_vbat_wifi>;
+	vqmmc-supply = <&reg_dldo4>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;
+	vcc-pg-supply = <&reg_dldo4>;
+	vcc-ph-supply = <&reg_dcdc1>;
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo2>;
+	 */
+};
+
+&r_pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-mipi-io";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-lpddr";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd-ctp-stk";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8-typec";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,name = "PinePhone";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Earpiece",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Headphone Jack", "HP",
+			"Internal Earpiece", "EARPIECE",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+
+	simple-audio-card,dai-link@2 {
+		format = "dsp_a";
+		frame-master = <&link2_codec>;
+		bitclock-master = <&link2_codec>;
+		bitclock-inversion;
+
+		link2_cpu: cpu {
+			sound-dai = <&bt_sco_codec 0>;
+		};
+
+		link2_codec: codec {
+			sound-dai = <&codec 2>;
+			dai-tdm-slot-num = <1>;
+			dai-tdm-slot-width = <32>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723cs-bt";
+		device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
+		enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+	};
+};
+
+/* Connected to the modem (hardware flow control can't be used) */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
new file mode 100644
index 000000000..6265360ce
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab-early-adopter.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Icenowy Zheng <icenowy@aosc.io>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64-pinetab.dts"
+
+/ {
+	model = "PineTab, Early Adopter's version";
+	compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
+};
+
+&dsi {
+	/delete-node/ panel@0;
+
+	panel@0 {
+		compatible = "feixin,k101-im2byl02", "ilitek,ili9881c";
+		reg = <0>;
+		power-supply = <&reg_dc1sw>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
new file mode 100644
index 000000000..0a5607f73
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PineTab, Development Sample";
+	compatible = "pine64,pinetab", "allwinner,sun50i-a64";
+	chassis-type = "tablet";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
+		default-brightness-level = <15>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+		power-supply = <&vdd_bl>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	i2c-csi {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
+		scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Rear camera */
+		ov5640: camera@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_mclk_pin>;
+			clocks = <&ccu CLK_CSI_MCLK>;
+			clock-names = "xclk";
+
+			AVDD-supply = <&reg_dldo3>;
+			DOVDD-supply = <&reg_aldo1>;
+			DVDD-supply = <&reg_eldo3>;
+			reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
+			powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
+
+			port {
+				ov5640_ep: endpoint {
+					remote-endpoint = <&csi_ep>;
+					bus-width = <8>;
+					hsync-active = <1>; /* Active high */
+					vsync-active = <0>; /* Active low */
+					data-active = <1>;  /* Active high */
+					pclk-sample = <1>;  /* Rising */
+				};
+			};
+		};
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	vdd_bl: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&csi {
+	status = "okay";
+
+	port {
+		csi_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "feixin,k101-im2ba02";
+		reg = <0>;
+		avdd-supply = <&reg_dc1sw>;
+		dvdd-supply = <&reg_dc1sw>;
+		cvdd-supply = <&reg_ldo_io1>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+		backlight = <&backlight>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt9271";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		AVDD28-supply = <&reg_ldo_io1>;
+	};
+};
+
+&i2c0_pins {
+	bias-pull-up;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* TODO: add Bochs BMA223 accelerometer here */
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mixer1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcca-1v8";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-enable-ramp-delay = <3500000>;
+	regulator-name = "vcc-touchscreen";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&sound {
+	status = "okay";
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
+				    "Microphone", "Internal Microphone Right",
+				    "Headphone", "Headphone Jack",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Internal Microphone Left", "MBIAS",
+			"MIC1", "Internal Microphone Left",
+			"Internal Microphone Right", "HBIAS",
+			"MIC2", "Internal Microphone Right";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
new file mode 100644
index 000000000..5e66ce1a3
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
+
+/dts-v1/;
+
+#include "sun50i-a64-sopine.dtsi"
+
+/ {
+	model = "SoPine with baseboard";
+	compatible = "pine64,sopine-baseboard", "pine64,sopine",
+		     "allwinner,sun50i-a64";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc1v8: vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dc1sw>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+	regulator-name = "vcc-phy";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>;
+	simple-audio-card,widgets = "Microphone", "Microphone Jack",
+				    "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"Headphone Jack", "HP",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"MIC2", "Microphone Jack";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+/* On Pi-2 connector */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "disabled";
+};
+
+/* On Euler connector, RTS/CTS optional */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
new file mode 100644
index 000000000..6d78a1c98
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-a64-pine64.dts, which is:
+//   Copyright (c) 2016 ARM Ltd.
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	disable-wp;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-1v8-lpddr";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
new file mode 100644
index 000000000..1128030e4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) Harald Geyer <harald@ccbib.org>
+// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+#include "sun50i-a64-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Olimex A64 Teres-I";
+	compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		power-supply = <&reg_dcdc1>;
+		brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
+		default-brightness-level = <5>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		framebuffer-lcd {
+			eDP25-supply = <&reg_dldo2>;
+			eDP12-supply = <&reg_dldo3>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "teres-i:green:capslock";
+			gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
+		};
+
+		led-1 {
+			label = "teres-i:green:numlock";
+			gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&codec_analog {
+	cpvdd-supply = <&reg_eldo1>;
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	anx6345: anx6345@38 {
+		compatible = "analogix,anx6345";
+		reg = <0x38>;
+		reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+		dvdd25-supply = <&reg_dldo2>;
+		dvdd12-supply = <&reg_dldo3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx6345_in: endpoint {
+					remote-endpoint = <&tcon0_out_anx6345>;
+				};
+			};
+		};
+	};
+};
+
+&mixer0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_aldo2>;
+	vqmmc-supply = <&reg_dldo4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723bs: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dcdc1>;
+	vcc-pd-supply = <&reg_dldo2>;
+	vcc-pe-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_dcdc1>;  /* No dedicated supply-pin for this */
+	vcc-pg-supply = <&reg_aldo2>;
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp803.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-ddr3";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-pd";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-edp";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work with this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&sound {
+	simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+	simple-audio-card,widgets = "Headphone", "Headphone Jack",
+				    "Microphone", "Headset Microphone",
+				    "Microphone", "Internal Microphone",
+				    "Speaker", "Internal Speaker";
+	simple-audio-card,routing =
+			"Left DAC", "DACL",
+			"Right DAC", "DACR",
+			"ADCL", "Left ADC",
+			"ADCR", "Right ADC",
+			"Headphone Jack", "HP",
+			"Speaker Amp INL", "LINEOUT",
+			"Speaker Amp INR", "LINEOUT",
+			"Internal Speaker", "Speaker Amp OUTL",
+			"Internal Speaker", "Speaker Amp OUTR",
+			"Internal Microphone", "MBIAS",
+			"MIC1", "Internal Microphone",
+			"Headset Microphone", "HBIAS",
+			"MIC2", "Headset Microphone";
+	status = "okay";
+};
+
+&tcon0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_rgb666_pins>;
+
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_anx6345: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&anx6345_in>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
new file mode 100644
index 000000000..57ac18738
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -0,0 +1,1390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// based on the Allwinner H3 dtsi:
+//    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		simplefb_lcd: framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&ccu CLK_TCON0>,
+				 <&display_clocks CLK_MIXER0>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-hdmi";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			next-level-cache = <&L2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun50i-a64-display-engine";
+		allwinner,pipelines = <&mixer0>,
+				      <&mixer1>;
+		status = "disabled";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	osc32k: osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext-osc32k";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sound: sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-a64-audio";
+		simple-audio-card,aux-devs = <&codec_analog>;
+		simple-audio-card,routing =
+				"Left DAC", "DACL",
+				"Right DAC", "DACR",
+				"ADCL", "Left ADC",
+				"ADCR", "Right ADC";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			frame-master = <&link0_cpu>;
+			bitclock-master = <&link0_cpu>;
+			mclk-fs = <128>;
+
+			link0_cpu: cpu {
+				sound-dai = <&dai>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&codec 0>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		allwinner,erratum-unknown1;
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_alert1: cpu_alert1 {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0_thermal: gpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		gpu1_thermal: gpu1-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bus@1000000 {
+			compatible = "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-a64-de2-clk";
+				reg = <0x0 0x10000>;
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			rotate: rotate@20000 {
+				compatible = "allwinner,sun50i-a64-de2-rotate",
+					     "allwinner,sun8i-a83t-de2-rotate";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&display_clocks CLK_BUS_ROT>,
+					 <&display_clocks CLK_ROT>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_ROT>;
+			};
+
+			mixer0: mixer@100000 {
+				compatible = "allwinner,sun50i-a64-de2-mixer-0";
+				reg = <0x100000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER0>,
+					 <&display_clocks CLK_MIXER0>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer0_out: port@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+
+						mixer0_out_tcon0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&tcon0_in_mixer0>;
+						};
+
+						mixer0_out_tcon1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&tcon1_in_mixer0>;
+						};
+					};
+				};
+			};
+
+			mixer1: mixer@200000 {
+				compatible = "allwinner,sun50i-a64-de2-mixer-1";
+				reg = <0x200000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER1>,
+					 <&display_clocks CLK_MIXER1>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER1>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer1_out: port@1 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <1>;
+
+						mixer1_out_tcon0: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&tcon0_in_mixer1>;
+						};
+
+						mixer1_out_tcon1: endpoint@1 {
+							reg = <1>;
+							remote-endpoint = <&tcon1_in_mixer1>;
+						};
+					};
+				};
+			};
+		};
+
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun50i-a64-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x28000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x28000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x28000>;
+				};
+			};
+
+			sram_c1: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x40000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x40000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <8>;
+			dma-requests = <27>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun50i-a64-tcon-lcd",
+				     "allwinner,sun8i-a83t-tcon-lcd";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+			clock-names = "ahb", "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd", "lvds";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+
+					tcon0_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun50i-a64-tcon-tv",
+				     "allwinner,sun8i-a83t-tcon-tv";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON1>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon1>;
+					};
+
+					tcon1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-a64-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sid: eeprom@1c14000 {
+			compatible = "allwinner,sun50i-a64-sid";
+			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 0x8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun50i-a64-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun50i-a64-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun50i-a64-usb-phy";
+			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@1c1a000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c1a400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1b000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1b400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun50i-a64-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun50i-a64-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			aif2_pins: aif2-pins {
+				pins = "PB4", "PB5", "PB6", "PB7";
+				function = "aif2";
+			};
+
+			/omit-if-no-ref/
+			aif3_pins: aif3-pins {
+				pins = "PG10", "PG11", "PG12", "PG13";
+				function = "aif3";
+			};
+
+			csi_pins: csi-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
+				       "PE7", "PE8", "PE9", "PE10", "PE11";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi_mclk_pin: csi-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PH0", "PH1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PE14", "PE15";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pins: lcd-rgb666-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9",
+				       "PD10", "PD11", "PD12", "PD13",
+				       "PD14", "PD15", "PD16", "PD17",
+				       "PD18", "PD19", "PD20", "PD21";
+				function = "lcd0";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC8", "PC9",
+				       "PC10","PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_ds_pin: mmc2-ds-pin {
+				pins = "PC1";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			pwm_pin: pwm-pin {
+				pins = "PD22";
+				function = "pwm";
+			};
+
+			rmii_pins: rmii-pins {
+				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
+				       "PD18", "PD19", "PD20", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			rgmii_pins: rgmii-pins {
+				pins = "PD8", "PD9", "PD10", "PD11", "PD12",
+				       "PD13", "PD15", "PD16", "PD17", "PD18",
+				       "PD19", "PD20", "PD21", "PD22", "PD23";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH8";
+				function = "spdif";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PD0", "PD1", "PD2", "PD3";
+				function = "spi1";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			uart3_pins: uart3-pins {
+				pins = "PD0", "PD1";
+				function = "uart3";
+			};
+
+			uart4_pins: uart4-pins {
+				pins = "PD2", "PD3";
+				function = "uart4";
+			};
+
+			uart4_rts_cts_pins: uart4-rts-cts-pins {
+				pins = "PD4", "PD5";
+				function = "uart4";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun50i-a64-timer",
+				     "allwinner,sun8i-a23-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun50i-a64-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-spdif",
+				     "allwinner,sun8i-h3-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			resets = <&ccu RST_BUS_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c21800 {
+			compatible = "allwinner,sun50i-a64-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c21800 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 3>, <&dma 3>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 4>, <&dma 4>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "rx", "tx";
+			dmas = <&dma 27>, <&dma 27>;
+			status = "disabled";
+		};
+
+		dai: dai@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-a64-codec-i2s";
+			reg = <0x01c22c00 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		codec: codec@1c22e00 {
+			#sound-dai-cells = <1>;
+			compatible = "allwinner,sun50i-a64-codec",
+				     "allwinner,sun8i-a33-codec";
+			reg = <0x01c22e00 0x600>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "bus", "mod";
+			status = "disabled";
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-a64-ths";
+			reg = <0x01c25000 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c69000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun50i-a64-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun50i-a64-mbus";
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
+		csi: csi@1cb0000 {
+			compatible = "allwinner,sun50i-a64-csi";
+			reg = <0x01cb0000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&csi_pins>;
+			status = "disabled";
+		};
+
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun50i-a64-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>;
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port {
+				dsi_in_tcon0: endpoint {
+					remote-endpoint = <&tcon0_out_dsi>;
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun50i-a64-mipi-dphy",
+				     "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun50i-a64-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun50i-a64-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon1: endpoint {
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun50i-a64-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+				 <&ccu CLK_PLL_VIDEO0>;
+			clock-names = "bus", "mod", "pll-0";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun50i-a64-rtc",
+				     "allwinner,sun8i-h3-rtc";
+			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun50i-a64-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun50i-a64-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		codec_analog: codec-analog@1f015c0 {
+			compatible = "allwinner,sun50i-a64-codec-analog";
+			reg = <0x01f015c0 0x4>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun50i-a64-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_ir: ir@1f02000 {
+			compatible = "allwinner,sun50i-a64-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01f02000 0x400>;
+			clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_APB0_IR>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_rx_pin>;
+			status = "disabled";
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01f03800 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@1f02c00 {
+			compatible = "allwinner,sun50i-a64-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pl89_pins: r-i2c-pl89-pins {
+				pins = "PL8", "PL9";
+				function = "s_i2c";
+			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL11";
+				function = "s_cir_rx";
+			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_rsb: rsb@1f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 6>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu 2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
new file mode 100644
index 000000000..6406a29c8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+#include <arm/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus v1.2 H5";
+	compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
new file mode 100644
index 000000000..cfb943e9a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/allwinner/sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+	model = "Banana Pi BPI-M2-Plus H5";
+	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
new file mode 100644
index 000000000..1afad8b43
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1000000 1000000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1080000 1080000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000 1120000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000 1160000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000 1240000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000 1260000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000 1300000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
new file mode 100644
index 000000000..076a0b983
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5-emlid-neutis-n5.dtsi"
+
+/ {
+	model = "Emlid Neutis N5 Developer board";
+	compatible = "emlid,neutis-n5-devboard",
+		     "emlid,neutis-n5",
+		     "allwinner,sun50i-h5";
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
new file mode 100644
index 000000000..2f4b46746
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+#include <arm/allwinner/sunxi-h3-h5-emlid-neutis.dtsi>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 000000000..b79018c65
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 BayLibre, SAS
+// Author: Neil Armstrong <narmstrong@baylibre.com>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+#include <arm/allwinner/sunxi-libretech-all-h3-cc.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H5";
+	compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
+
+&mmc2 {
+	mmc-ddr-3_3v;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
new file mode 100644
index 000000000..dc657de2a
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/allwinner/sunxi-libretech-all-h3-it.dtsi>
+
+/ {
+	model = "Libre Computer Board ALL-H3-IT H5";
+	compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
new file mode 100644
index 000000000..6e30a564c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+#include "sun50i-h5-libretech-all-h3-cc.dts"
+
+/ {
+	model = "Libre Computer Board ALL-H5-CC H5";
+	compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+};
+
+&codec {
+	/* No line out; only onboard microphone */
+	allwinner,audio-routing =
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+};
+
+/* This board has external PHY */
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	/delete-property/ allwinner,leds-active-low;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
new file mode 100644
index 000000000..4c3921ac2
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Antony Antony <antony@phenome.org>
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Plus2";
+	compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
new file mode 100644
index 000000000..05486ccce
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO 2";
+	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
new file mode 100644
index 000000000..a3e040da3
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ *   Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ *   Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1S H5";
+	compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189etv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth_mac1: mac-address@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8189etv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
new file mode 100644
index 000000000..ce3ae19e7
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi PC 2";
+	compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1100000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
new file mode 100644
index 000000000..d7f8bad6b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+// Based on sun50i-h5-orangepi-pc2.dts, which is:
+//   Copyright (C) 2016 ARM Ltd.
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Xunlong Orange Pi Prime";
+	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-sw4 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "disabled";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
new file mode 100644
index 000000000..7ec5ac850
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Zero Plus";
+	compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5";
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189ftv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	/*
+	 * Explicitly define the sdio device, so that we can add an ethernet
+	 * alias for it (which e.g. makes u-boot set a mac-address).
+	 */
+	rtl8189ftv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A ports' VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
new file mode 100644
index 000000000..22530ace1
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi Zero Plus2";
+	compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
new file mode 100644
index 000000000..d3caf27b6
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2016 ARM Ltd.
+
+#include <arm/allwinner/sunxi-h3-h5.dtsi>
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun50i-h5-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c1: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x1c000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x1c000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h5-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x1c000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h5-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun50i-h5-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		deinterlace: deinterlace@1e00000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01e00000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		mali: gpu@1e80000 {
+			compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+			reg = <0x01e80000 0x30000>;
+			/*
+			 * While the datasheet lists an interrupt for the
+			 * PMU, the actual silicon does not have the PMU
+			 * block. Reads all return zero, and writes are
+			 * ignored.
+			 */
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun50i-h5-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun50i-h5-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun50i-h5-de2-clk";
+};
+
+&mbus {
+	compatible = "allwinner,sun50i-h5-mbus";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+	clock-names = "ahb", "mmc";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun50i-h5-emmc",
+		     "allwinner,sun50i-a64-emmc";
+	clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+	clock-names = "ahb", "mmc";
+};
+
+&pio {
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "allwinner,sun50i-h5-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun50i-h5-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun50i-h5-sid";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
new file mode 100644
index 000000000..9ec49ac2f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+#include "sun50i-h6-gpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Beelink GS1";
+	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "beelink:white:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_aldo2>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
new file mode 100644
index 000000000..0baf0f8e4
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-h6-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+
+		opp-480000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <480000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-720000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <720000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-816000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <816000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-888000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <888000000>;
+
+			opp-microvolt-speed0 = <880000 880000 1200000>;
+			opp-microvolt-speed1 = <820000 820000 1200000>;
+			opp-microvolt-speed2 = <820000 820000 1200000>;
+		};
+
+		opp-1080000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1080000000>;
+
+			opp-microvolt-speed0 = <940000 940000 1200000>;
+			opp-microvolt-speed1 = <880000 880000 1200000>;
+			opp-microvolt-speed2 = <880000 880000 1200000>;
+		};
+
+		opp-1320000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1320000000>;
+
+			opp-microvolt-speed0 = <1000000 1000000 1200000>;
+			opp-microvolt-speed1 = <940000 940000 1200000>;
+			opp-microvolt-speed2 = <940000 940000 1200000>;
+		};
+
+		opp-1488000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1488000000>;
+
+			opp-microvolt-speed0 = <1060000 1060000 1200000>;
+			opp-microvolt-speed1 = <1000000 1000000 1200000>;
+			opp-microvolt-speed2 = <1000000 1000000 1200000>;
+		};
+
+		opp-1608000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1608000000>;
+
+			opp-microvolt-speed0 = <1090000 1090000 1200000>;
+			opp-microvolt-speed1 = <1030000 1030000 1200000>;
+			opp-microvolt-speed2 = <1030000 1030000 1200000>;
+		};
+
+		opp-1704000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1704000000>;
+
+			opp-microvolt-speed0 = <1120000 1120000 1200000>;
+			opp-microvolt-speed1 = <1060000 1060000 1200000>;
+			opp-microvolt-speed2 = <1060000 1060000 1200000>;
+		};
+
+		opp-1800000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1800000000>;
+
+			opp-microvolt-speed0 = <1160000 1160000 1200000>;
+			opp-microvolt-speed1 = <1100000 1100000 1200000>;
+			opp-microvolt-speed2 = <1100000 1100000 1200000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi
new file mode 100644
index 000000000..b48049c4f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-gpu-opp.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Clément Péron <peron.clem@gmail.com>
+
+/ {
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-336000000 {
+			opp-hz = /bits/ 64 <336000000>;
+			opp-microvolt = <810000 810000 1200000>;
+		};
+
+		opp-360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <820000 820000 1200000>;
+		};
+
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <830000 830000 1200000>;
+		};
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <840000 840000 1200000>;
+		};
+
+		opp-420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <850000 850000 1200000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <860000 860000 1200000>;
+		};
+
+		opp-456000000 {
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <870000 870000 1200000>;
+		};
+
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <890000 890000 1200000>;
+		};
+
+		opp-540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <910000 910000 1200000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-microvolt = <930000 930000 1200000>;
+		};
+
+		opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <950000 950000 1200000>;
+		};
+
+		opp-756000000 {
+			opp-hz = /bits/ 64 <756000000>;
+			opp-microvolt = <1040000 1040000 1200000>;
+		};
+	};
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
new file mode 100644
index 000000000..6fc65e8db
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3";
+	compatible = "xunlong,orangepi-3", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_vcc_wifi_io>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+/* There's the BT part of the AP6256 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
+
+&usb2otg {
+	/*
+	 * This board doesn't have a controllable VBUS even though it
+	 * does have an ID pin. Using it as anything but a USB host is
+	 * unsafe.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
new file mode 100644
index 000000000..fb31dcb1c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+	model = "OrangePi Lite2";
+	compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
+
+	aliases {
+		serial1 = &uart1; /* BT-UART */
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo2>;
+	vqmmc-supply = <&reg_bldo3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcm: sdio-wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>;	/* PM0 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&reg_cldo2 {
+	/*
+	 * This regulator is connected with CLDO3.
+	 * Before the kernel can support synchronized
+	 * enable of coupled regulators, keep them
+	 * both always on as a ugly hack.
+	 */
+	regulator-always-on;
+};
+
+&reg_cldo3 {
+	/*
+	 * This regulator is connected with CLDO2.
+	 * See the comments for CLDO2.
+	 */
+	regulator-always-on;
+};
+
+/* There's the BT part of the AP6255 connected to that UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
new file mode 100644
index 000000000..29a081e72
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+#include "sun50i-h6-orangepi.dtsi"
+
+/ {
+	model = "OrangePi One Plus";
+	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+		vin-supply = <&reg_aldo2>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
new file mode 100644
index 000000000..92745128f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Amarula Solutions
+// Author: Jagan Teki <jagan@amarulasolutions.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi One Plus";
+	compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc25-dram";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	/*
+	 * OrangePi Lite 2 and One Plus, where this DT is used, don't
+	 * have a controllable VBUS even though they do have an ID pin.
+	 * Using it as anything but a USB host is unsafe.
+	 */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
new file mode 100644
index 000000000..b710f1a0f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
+ */
+
+#include "sun50i-h6-pine-h64.dts"
+
+/ {
+	model = "Pine H64 model B";
+	compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
+
+	/delete-node/ reg_gmac_3v3;
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&hdmi_connector {
+	/delete-property/ ddc-en-gpios;
+};
+
+&emac {
+	phy-supply = <&reg_aldo2>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_cldo3>;
+	vqmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+		max-speed = <1500000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
new file mode 100644
index 000000000..1ffd68f43
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine H64 model A";
+	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	hdmi_connector: connector {
+		compatible = "hdmi-connector";
+		type = "a";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "pine-h64:green:heartbeat";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		};
+
+		led-1 {
+			label = "pine-h64:white:link";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
+		};
+
+		led-2 {
+			label = "pine-h64:blue:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <100000>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <200>;
+	allwinner,tx-delay-ps = <200>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+				regulator-enable-ramp-delay = <100000>;
+			};
+
+			reg_aldo3: aldo3 {
+				/* This regulator is connected with CLDO1 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				/* This regulator is connected with ALDO3 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-2";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+	};
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/*
+ * The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
+ * flash and eMMC at the same time, as one of them would fail probing.
+ * Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
+ * fix this up in no eMMC is connected.
+ */
+&spi0 {
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	flash@0 {
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_vbus-supply = <&reg_usb_vbus>;
+	usb3_vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
new file mode 100644
index 000000000..08d84160d
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+	model = "Tanix TX6 mini";
+	compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
new file mode 100644
index 000000000..9a38ff9b3
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+	model = "Tanix TX6";
+	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+	linux,rc-map-name = "rc-tanix-tx5max";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+		host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+		enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
new file mode 100644
index 000000000..4903d6358
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	/* used for FD650 LED display driver */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+		scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+		i2c-gpio,delay-us = <5>;
+	};
+
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-gpu";
+		regulator-min-microvolt = <1135000>;
+		regulator-max-microvolt = <1135000>;
+	};
+
+	sound-spdif {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sun50i-h6-spdif";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpu_gpu>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_vdd_cpu_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_vcc1v8>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc1v8>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
new file mode 100644
index 000000000..ca1d287a0
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -0,0 +1,1128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun50i-h6-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		bus@1000000 {
+			compatible = "allwinner,sun50i-h6-de3",
+				     "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-h6-de3-clk";
+				reg = <0x0 0x10000>;
+				clocks = <&ccu CLK_BUS_DE>,
+					 <&ccu CLK_DE>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			mixer0: mixer@100000 {
+				compatible = "allwinner,sun50i-h6-de3-mixer-0";
+				reg = <0x100000 0x100000>;
+				clocks = <&display_clocks CLK_BUS_MIXER0>,
+					 <&display_clocks CLK_MIXER0>;
+				clock-names = "bus",
+					      "mod";
+				resets = <&display_clocks RST_MIXER0>;
+				iommus = <&iommu 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					mixer0_out: port@1 {
+						reg = <1>;
+
+						mixer0_out_tcon_top_mixer0: endpoint {
+							remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+						};
+					};
+				};
+			};
+		};
+
+		video-codec-g2@1c00000 {
+			compatible = "allwinner,sun50i-h6-vpu-g2";
+			reg = <0x01c00000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_VP9>;
+			iommus = <&iommu 5>;
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h6-video-engine";
+			reg = <0x01c0e000 0x2000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_MBUS_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+			iommus = <&iommu 3>;
+		};
+
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h6-mali",
+				     "arm,mali-t720";
+			reg = <0x01800000 0x4000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			resets = <&ccu RST_BUS_GPU>;
+			#cooling-cells = <2>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1904000 {
+			compatible = "allwinner,sun50i-h6-crypto";
+			reg = <0x01904000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h6-system-control",
+				     "allwinner,sun50i-a64-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x1e000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x1e000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h6-sram-c",
+						     "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x1e000>;
+				};
+			};
+
+			sram_c1: sram@1a00000 {
+				compatible = "mmio-sram";
+				reg = <0x01a00000 0x200000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01a00000 0x200000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h6-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x200000>;
+				};
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h6-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h6-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <46>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		msgbox: mailbox@3003000 {
+			compatible = "allwinner,sun50i-h6-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x03003000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun50i-h6-sid";
+			reg = <0x03006000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
+
+			cpu_speed_grade: cpu-speed-grade@1c {
+				reg = <0x1c 0x4>;
+			};
+		};
+
+		timer@3009000 {
+			compatible = "allwinner,sun50i-h6-timer",
+				     "allwinner,sun8i-a23-timer";
+			reg = <0x03009000 0xa0>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h6-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+			/* Broken on some H6 boards */
+			status = "disabled";
+		};
+
+		pwm: pwm@300a000 {
+			compatible = "allwinner,sun50i-h6-pwm";
+			reg = <0x0300a000 0x400>;
+			clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
+			clock-names = "mod", "bus";
+			resets = <&ccu RST_BUS_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h6-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD11", "PD12", "PD13", "PD19", "PD20";
+				function = "emac";
+				drive-strength = <40>;
+			};
+
+			hdmi_pins: hdmi-pins {
+				pins = "PH8", "PH9", "PH10";
+				function = "hdmi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PD25", "PD26";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PH5", "PH6";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PD23", "PD24";
+				function = "i2c2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC1", "PC4", "PC5", "PC6",
+				       "PC7", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			/* pin shared with MMC2-CMD (eMMC) */
+			/omit-if-no-ref/
+			spi0_cs_pin: spi0-cs-pin {
+				pins = "PC5";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH4", "PH5", "PH6";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs_pin: spi1-cs-pin {
+				pins = "PH3";
+				function = "spi1";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PH7";
+				function = "spdif";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		iommu: iommu@30f0000 {
+			compatible = "allwinner,sun50i-h6-iommu";
+			reg = <0x030f0000 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_IOMMU>;
+			resets = <&ccu RST_BUS_IOMMU>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h6-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h6-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h6-emac",
+				     "allwinner,sun50i-a64-emac";
+			syscon = <&syscon>;
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		i2s1: i2s@5091000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-i2s";
+			reg = <0x05091000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 4>, <&dma 4>;
+			resets = <&ccu RST_BUS_I2S1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spdif: spdif@5093000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun50i-h6-spdif";
+			reg = <0x05093000 0x400>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			resets = <&ccu RST_BUS_SPDIF>;
+			dmas = <&dma 2>;
+			dma-names = "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spdif_tx_pin>;
+			status = "disabled";
+		};
+
+		usb2otg: usb@5100000 {
+			compatible = "allwinner,sun50i-h6-musb",
+				     "allwinner,sun8i-a33-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			extcon = <&usb2phy 0>;
+			status = "disabled";
+		};
+
+		usb2phy: phy@5100400 {
+			compatible = "allwinner,sun50i-h6-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x4>,
+			      <0x05311800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY3>;
+			clock-names = "usb0_phy",
+				      "usb3_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usb2phy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		dwc3: usb@5200000 {
+			compatible = "snps,dwc3";
+			reg = <0x05200000 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_XHCI>,
+				 <&ccu CLK_BUS_XHCI>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "ref", "bus_early", "suspend";
+			resets = <&ccu RST_BUS_XHCI>;
+			/*
+			 * The datasheet of the chip doesn't declare the
+			 * peripheral function, and there's no boards known
+			 * to have a USB Type-B port routed to the port.
+			 * In addition, no one has tested the peripheral
+			 * function yet.
+			 * So set the dr_mode to "host" in the DTSI file.
+			 */
+			dr_mode = "host";
+			phys = <&usb3phy>;
+			phy-names = "usb3-phy";
+			status = "disabled";
+		};
+
+		usb3phy: phy@5210000 {
+			compatible = "allwinner,sun50i-h6-usb3-phy";
+			reg = <0x5210000 0x10000>;
+			clocks = <&ccu CLK_USB_PHY1>;
+			resets = <&ccu RST_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usb2phy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usb2phy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		hdmi: hdmi@6000000 {
+			compatible = "allwinner,sun50i-h6-dw-hdmi";
+			reg = <0x06000000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+				 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+			clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+				      "hdcp-bus";
+			resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+			reset-names = "ctrl", "hdcp";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pins>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@6010000 {
+			compatible = "allwinner,sun50i-h6-hdmi-phy";
+			reg = <0x06010000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_HDMI>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+
+		tcon_top: tcon-top@6510000 {
+			compatible = "allwinner,sun50i-h6-tcon-top";
+			reg = <0x06510000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>;
+			clock-names = "bus",
+				      "tcon-tv0";
+			clock-output-names = "tcon-top-tv0";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_tv: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv: lcd-controller@6515000 {
+			compatible = "allwinner,sun50i-h6-tcon-tv",
+				     "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x06515000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>,
+				 <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb",
+				      "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv_in: port@0 {
+					reg = <0>;
+
+					tcon_tv_in_tcon_top_mixer0: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
+					};
+				};
+
+				tcon_tv_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
+					};
+				};
+			};
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h6-r-ccu";
+			reg = <0x07010000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_watchdog: watchdog@7020400 {
+			compatible = "allwinner,sun50i-h6-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x07020400 0x20>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		r_intc: interrupt-controller@7021000 {
+			compatible = "allwinner,sun50i-h6-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x07021000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h6-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			interrupt-parent = <&r_intc>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_ir_rx_pin: r-ir-rx-pin {
+				pins = "PL9";
+				function = "s_cir_rx";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		r_ir: ir@7040000 {
+				compatible = "allwinner,sun50i-h6-ir",
+					     "allwinner,sun6i-a31-ir";
+				reg = <0x07040000 0x400>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&r_ccu CLK_R_APB1_IR>,
+					 <&r_ccu CLK_IR>;
+				clock-names = "apb", "ir";
+				resets = <&r_ccu RST_R_APB1_IR>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&r_ir_rx_pin>;
+				status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h6-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_rsb: rsb@7083000 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x07083000 0x400>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h6-ths";
+			reg = <0x05070400 0x100>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <2000>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: gpu-alert-1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert2: gpu-alert-2 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				// Forbid the GPU to go over 756MHz
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
+				};
+
+				// Forbid the GPU to go over 624MHz
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+				};
+
+				// Forbid the GPU to go over 576MHz
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
new file mode 100644
index 000000000..fc7315b94
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ *
+ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3.
+ * Excludes PMIC nodes and properties, since they are different between the two.
+ */
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_vcc5v>;
+		enable-active-high;
+		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/* USB 2 & 3 are on headers only. */
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	/*
+	 * PHY0 pins are connected to a USB-C socket, but a role switch
+	 * is not implemented: both CC pins are pulled to GND.
+	 * The VBUS pins power the device, so a fixed peripheral mode
+	 * is the best choice.
+	 * The board can be powered via GPIOs, in this case port0 *can*
+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
+	 * then provided by the GPIOs. Any user of this setup would
+	 * need to adjust the DT accordingly: dr_mode set to "host",
+	 * enabling OHCI0 and EHCI0.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
new file mode 100644
index 000000000..b5d713926
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-orangepi-zero.dtsi"
+
+/ {
+	model = "OrangePi Zero2";
+	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+};
+
+&emac0 {
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dcdce>;
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			reg_aldo2: aldo2 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+			};
+
+			reg_aldo3: aldo3 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* reserved */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_aldo1>;
+	vcc-pi-supply = <&reg_aldo1>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
new file mode 100644
index 000000000..959b6fd18
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "X96 Mate";
+	compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdce>;
+	vqmmc-supply = <&reg_bldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			/* Enabled by the Android BSP */
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+				status = "disabled";
+			};
+
+			/* Enabled by the Android BSP */
+			reg_aldo3: aldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+				status = "disabled";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Enabled by the Android BSP */
+			reg_bldo2: bldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8-2";
+				status = "disabled";
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vcc2v5";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1360000>;
+				regulator-max-microvolt = <1360000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
new file mode 100644
index 000000000..74aed0d23
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
@@ -0,0 +1,751 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Arm Ltd.
+// based on the H6 dtsi, which is:
+//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 256 KiB reserved for Trusted Firmware-A (BL31).
+		 * This is added by BL31 itself, but some bootloaders fail
+		 * to propagate this into the DTB handed to kernels.
+		 */
+		secmon@40000000 {
+			reg = <0x0 0x40000000 0x0 0x40000>;
+			no-map;
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h616-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x30000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x30000>;
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h616-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h616-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h616-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PI0", "PI1", "PI2", "PI3", "PI4",
+				       "PI5", "PI7", "PI8", "PI9", "PI10",
+				       "PI11", "PI12", "PI13", "PI14", "PI15",
+				       "PI16";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PI6", "PI7";
+				function = "i2c0";
+			};
+
+			i2c3_ph_pins: i2c3-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c3";
+			};
+
+			ir_rx_pin: ir-rx-pin {
+				pins = "PH10";
+				function = "ir_rx";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC4";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pin: spi0-cs0-pin {
+				pins = "PC3";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PH5";
+				function = "spi1";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h616-emmc",
+				     "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@5001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@5003000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05003000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h616-emac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usbotg: usb@5100000 {
+			compatible = "allwinner,sun50i-h616-musb",
+				     "allwinner,sun8i-h3-musb";
+			reg = <0x05100000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@5100400 {
+			compatible = "allwinner,sun50i-h616-usb-phy";
+			reg = <0x05100400 0x24>,
+			      <0x05101800 0x14>,
+			      <0x05200800 0x14>,
+			      <0x05310800 0x14>,
+			      <0x05311800 0x14>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2",
+				    "pmu3";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>,
+				 <&ccu CLK_USB_PHY3>,
+				 <&ccu CLK_BUS_EHCI2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy",
+				      "usb3_phy",
+				      "pmu2_clk";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>,
+				 <&ccu RST_USB_PHY3>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset",
+				      "usb3_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@5101000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05101000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_BUS_EHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>,
+				 <&ccu RST_BUS_EHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@5101400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05101400 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@5200000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05200000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@5200400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05200400 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@5310000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05310000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_BUS_EHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>,
+				 <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@5310400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05310400 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci3: usb@5311000 {
+			compatible = "allwinner,sun50i-h616-ehci",
+				     "generic-ehci";
+			reg = <0x05311000 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_BUS_EHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>,
+				 <&ccu RST_BUS_EHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci3: usb@5311400 {
+			compatible = "allwinner,sun50i-h616-ohci",
+				     "generic-ohci";
+			reg = <0x05311400 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI3>,
+				 <&ccu CLK_USB_OHCI3>;
+			resets = <&ccu RST_BUS_OHCI3>;
+			phys = <&usbphy 3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h616-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
+				 <&ccu CLK_PLL_SYSTEM_32K>;
+			clock-names = "bus", "hosc",
+				      "pll-32k";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h616-r-ccu";
+			reg = <0x07010000 0x210>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h616-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		ir: ir@7040000 {
+			compatible = "allwinner,sun50i-h616-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x07040000 0x400>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1_IR>,
+				 <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_R_APB1_IR>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir_rx_pin>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_rsb: rsb@7083000 {
+			compatible = "allwinner,sun50i-h616-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x07083000 0x400>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
new file mode 100644
index 000000000..b3b1b8692
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616-orangepi-zero.dtsi"
+
+/ {
+	model = "OrangePi Zero3";
+	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
+};
+
+&emac0 {
+	allwinner,tx-delay-ps = <700>;
+	phy-mode = "rgmii-rxid";
+	phy-supply = <&reg_dldo1>;
+};
+
+&ext_rgmii_phy {
+	motorcomm,clk-out-frequency-hz = <125000000>;
+};
+
+&mmc0 {
+	/*
+	 * The schematic shows the card detect pin wired up to PF6, via an
+	 * inverter, but it just doesn't work.
+	 */
+	broken-cd;
+	vmmc-supply = <&reg_dldo1>;
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL, so needs to be always on. */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_dldo1>;
+	vcc-pf-supply = <&reg_dldo1>;
+	vcc-pg-supply = <&reg_aldo1>;
+	vcc-ph-supply = <&reg_dldo1>;
+	vcc-pi-supply = <&reg_dldo1>;
+};
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
new file mode 100644
index 000000000..1bf0c472f
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
+				socfpga_stratix10_socdk_nand.dtb \
+				socfpga_stratix10_swvp.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
new file mode 100644
index 000000000..439497ab9
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/stratix10-clock.h>
+
+/ {
+	compatible = "altr,socfpga-stratix10";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x0 0x0 0x1000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* Local timer */
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		interrupt-parent = <&intc>;
+	};
+
+	intc: interrupt-controller@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x0 0x1000>,
+		      <0x0 0xfffc2000 0x0 0x2000>,
+		      <0x0 0xfffc4000 0x0 0x2000>,
+		      <0x0 0xfffc6000 0x0 0x2000>;
+	};
+
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+
+		base_fpga_region {
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,stratix10-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 90 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <0 91 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 92 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr STRATIX10_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 110 4>;
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 111 4>;
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <0 103 4>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <0 104 4>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <0 105 4>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <0 106 4>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <0 107 4>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		mmc: mmc@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 96 4>;
+			fifo-depth = <0x400>;
+			resets = <&rst SDMMC_RESET>;
+			reset-names = "reset";
+			clocks = <&clkmgr STRATIX10_L4_MP_CLK>,
+				 <&clkmgr STRATIX10_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <0 97 4>;
+			clocks = <&clkmgr STRATIX10_NAND_CLK>,
+				 <&clkmgr STRATIX10_NAND_X_CLK>,
+				 <&clkmgr STRATIX10_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xffe00000 0x100000>;
+		};
+
+		pdma: dma-controller@ffda0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xffda0000 0x1000>;
+			interrupts = <0 81 4>,
+				     <0 82 4>,
+				     <0 83 4>,
+				     <0 84 4>,
+				     <0 85 4>,
+				     <0 86 4>,
+				     <0 87 4>,
+				     <0 88 4>,
+				     <0 89 4>;
+			#dma-cells = <1>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
+			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+			reset-names = "dma", "dma-ocp";
+		};
+
+		pinctrl0: pinctrl@ffd13000 {
+			compatible = "pinctrl-single";
+			reg = <0xffd13000 0xA0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		pinctrl1: pinctrl@ffd13100 {
+			compatible = "pinctrl-single";
+			reg = <0xffd13100 0x20>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		rst: rstmgr@ffd11000 {
+			#reset-cells = <1>;
+			compatible = "altr,stratix10-rst-mgr";
+			reg = <0xffd11000 0x1000>;
+		};
+
+		smmu: iommu@fa000000 {
+			compatible = "arm,mmu-500", "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			clock-names = "iommu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 128 4>,	/* Global Secure Fault */
+				<0 129 4>, /* Global Non-secure Fault */
+				/* Non-secure Context Interrupts (32) */
+				<0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>,
+				<0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>,
+				<0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>,
+				<0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>,
+				<0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>,
+				<0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>,
+				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
+				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
+			stream-match-mask = <0x7ff0>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <0 99 4>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <0 100 4>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0xffd12000 0x228>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 113 4>;
+			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 114 4>;
+			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 4>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 4>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 108 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		uart1: serial@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 109 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <0 93 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
+			iommus = <&smmu 6>;
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <0 94 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			iommus = <&smmu 7>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 117 4>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 118 4>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <0 125 4>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <0 126 4>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		sdr: sdr@f8011100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xf8011100 0xc0>;
+		};
+
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <0 15 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 4>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 4>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 4>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 4>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 4>;
+			};
+
+		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
+
+		firmware {
+			svc {
+				compatible = "intel,stratix10-svc";
+				method = "smc";
+				memory-region = <&service_reserved>;
+
+				fpga_mgr: fpga-mgr {
+					compatible = "intel,stratix10-soc-fpga-mgr";
+				};
+			};
+		};
+	};
+
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
new file mode 100644
index 000000000..468fcc7da
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+	compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	ref_033v: regulator-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	i2c1_pmx_func: i2c1-pmx-func {
+		pinctrl-single,pins = <
+			0x78   0x4   /* I2C1_SDA (IO6-B) PIN30SEL) */
+			0x7c   0x4   /* I2C1_SCL (IO7-B) PIN31SEL */
+		>;
+	};
+
+	i2c1_pmx_func_gpio: i2c1-pmx-func-gpio {
+		pinctrl-single,pins = <
+			0x78   0x8   /* I2C1_SDA (IO6-B) PIN30SEL) */
+			0x7c   0x8   /* I2C1_SCL (IO7-B) PIN31SEL */
+		>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pmx_func>;
+	pinctrl-1 = <&i2c1_pmx_func_gpio>;
+
+	scl-gpios = <&portb 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&portb 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "Root Filesystem - UBIFS";
+				reg = <0x04200000 0x0BE00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
new file mode 100644
index 000000000..532164a63
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+	compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-hps0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-hps2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	ref_033v: regulator-v-ref {
+		compatible = "regulator-fixed";
+		regulator-name = "0.33V";
+		regulator-min-microvolt = <330000>;
+		regulator-max-microvolt = <330000>;
+	};
+
+	soc {
+		eccmgr {
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 4>,
+					     <15 4>;
+			};
+		};
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0x3fe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
+
+	adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&ref_033v>;
+	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x03FE0000>;
+			};
+
+			qspi_rootfs: partition@3fe0000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x03FE0000 0x0C020000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
new file mode 100644
index 000000000..ff413f8e3
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022, Intel Corporation
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SOCFPGA Stratix 10 SWVP";
+	compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		linux,initrd-start = <0x10000000>;
+		linux,initrd-end = <0x125c8324>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu2 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&cpu3 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x0000fff8>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>;
+	snps,max-mtu = <0x0>;
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>;
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>;
+};
+
+&mmc {
+	status = "okay";
+	altr,dw-mshc-ciu-div = <0x3>;
+	altr,dw-mshc-sdr-timing = <0x0 0x3>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+	status = "okay";
+};
+
+&usb1 {
+	clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
+	status = "okay";
+};
+
+&rst {
+	altr,modrst-offset = <0x20>;
+};
+
+&sysmgr {
+	reg = <0xffd12000 0x1000>;
+	interrupts = <0x0 0x10 0x4>;
+	cpu1-start-addr = <0xffd06230>;
+};
diff --git a/arch/arm64/boot/dts/amazon/Makefile b/arch/arm64/boot/dts/amazon/Makefile
new file mode 100644
index 000000000..ba9e11544
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v3-evp.dtb
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
new file mode 100644
index 000000000..a079d7b30
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "alpine-v2.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine v2 EVP";
+	compatible = "al,alpine-v2-evp", "al,alpine-v2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
new file mode 100644
index 000000000..dccbba6e7
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Annapurna Labs Alpine v2";
+	compatible = "al,alpine-v2";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	sbclk: sbclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		pmu {
+			compatible = "arm,armv8-pmuv3";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@f0200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
+			      <0x0 0xf0280000 0x0 0x200000>,	/* GICR */
+			      <0x0 0xf0100000 0x0 0x2000>,	/* GICC */
+			      <0x0 0xf0110000 0x0 0x2000>,	/* GICV */
+			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pci@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* add legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
+					<0x4800 0 0 1 &gic 0 54 4>;
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <160>;
+			al,msi-num-spis = <160>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			timer0: timer@1890000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1890000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+			};
+
+			timer1: timer@1891000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1891000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer2: timer@1892000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1892000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer3: timer@1893000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1893000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
new file mode 100644
index 000000000..48078f5ea
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include "alpine-v3.dtsi"
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3 Evaluation Platform (EVP)";
+	compatible = "amazon,al-alpine-v3-evp", "amazon,al-alpine-v3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
new file mode 100644
index 000000000..39481d7fd
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Amazon.com, Inc. or its affiliates. All Rights Reserved
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3";
+	compatible = "amazon,al-alpine-v3";
+
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x202>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x203>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x302>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x303>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: cache@0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: cache@100 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: cache@200 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: cache@300 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@0 {
+			reg = <0x0 0x0 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f0000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
+			      <0x0 0xf0a00000 0 0x200000>,	/* GICR */
+			      <0x0 0xf0000000 0 0x2000>,	/* GICC */
+			      <0x0 0xf0010000 0 0x1000>,	/* GICH */
+			      <0x0 0xf0020000 0 0x2000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@fbd00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbd00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* 8 x legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					<0x4800 0 0 1 &gic 0 58 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5000 0 0 1 &gic 0 59 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5800 0 0 1 &gic 0 60 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6000 0 0 1 &gic 0 61 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6800 0 0 1 &gic 0 62 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7000 0 0 1 &gic 0 63 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7800 0 0 1 &gic 0 64 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <336>;
+			al,msi-num-spis = <959>;
+			interrupt-parent = <&gic>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
new file mode 100644
index 000000000..68103a8b0
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 000000000..21149acb6
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+/include/ "amd-seattle-cpus.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+};
+
+&ccp0 {
+	status = "okay";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 000000000..99205ae1b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+/include/ "amd-seattle-cpus.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+};
+
+&ccp0 {
+	status = "okay";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "okay";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
new file mode 100644
index 000000000..2dd2c2817
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle Clocks
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+	adl3clk_100mhz: clk100mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "adl3clk_100mhz";
+	};
+
+	ccpclk_375mhz: clk375mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <375000000>;
+		clock-output-names = "ccpclk_375mhz";
+	};
+
+	sataclk_333mhz: clk333mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333000000>;
+		clock-output-names = "sataclk_333mhz";
+	};
+
+	pcieclk_500mhz: clk500mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+		clock-output-names = "pcieclk_500mhz";
+	};
+
+	dmaclk_500mhz: clk500mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+		clock-output-names = "dmaclk_500mhz";
+	};
+
+	miscclk_250mhz: clk250mhz_4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "miscclk_250mhz";
+	};
+
+	uartspiclk_100mhz: clk100mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "uartspiclk_100mhz";
+	};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-cpus.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-cpus.dtsi
new file mode 100644
index 000000000..93688a0b6
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-cpus.dtsi
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpus {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU6>;
+				};
+				core1 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_0>;
+
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x100>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x101>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x200>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_2>;
+		};
+
+		CPU5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x201>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_2>;
+		};
+
+		CPU6: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x300>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_3>;
+		};
+
+		CPU7: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x301>;
+			enable-method = "psci";
+
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			l2-cache = <&L2_3>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L2_1: l2-cache1 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L2_2: l2-cache2 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L2_3: l2-cache3 {
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		cache-unified;
+		next-level-cache = <&L3>;
+	};
+
+	L3: l3-cache {
+		cache-level = <3>;
+		cache-size = <0x800000>;
+		cache-line-size = <64>;
+		cache-sets = <8192>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <0x0 0x7 0x4>,
+			     <0x0 0x8 0x4>,
+			     <0x0 0x9 0x4>,
+			     <0x0 0xa 0x4>,
+			     <0x0 0xb 0x4>,
+			     <0x0 0xc 0x4>,
+			     <0x0 0xd 0x4>,
+			     <0x0 0xe 0x4>;
+		interrupt-affinity = <&CPU0>,
+				     <&CPU1>,
+				     <&CPU2>,
+				     <&CPU3>,
+				     <&CPU4>,
+				     <&CPU5>,
+				     <&CPU6>,
+				     <&CPU7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
new file mode 100644
index 000000000..690020589
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle SoC
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/ {
+	compatible = "amd,seattle";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	gic0: interrupt-controller@e1101000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xe1110000 0 0x1000>,
+		      <0x0 0xe112f000 0 0x2000>,
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+		ranges = <0 0 0 0xe1100000 0 0x100000>;
+		v2m0: v2m@e0080000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x00080000 0 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff04>,
+			     <1 14 0xff04>,
+			     <1 11 0xff04>,
+			     <1 10 0xff04>;
+	};
+
+	smb0: smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		/include/ "amd-seattle-clks.dtsi"
+
+		sata0: sata@e0300000 {
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0300000 0 0xf0000>;
+			interrupts = <0 355 4>;
+			clocks = <&sataclk_333mhz>;
+			iommus = <&sata0_smmu 0x0 0x1f>;
+			dma-coherent;
+		};
+
+		/* This is for Rev B only */
+		sata1: sata@e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			iommus = <&sata1_smmu 0x0e>,
+				 <&sata1_smmu 0x0f>,
+				 <&sata1_smmu 0x1e>;
+			dma-coherent;
+		};
+
+		sata0_smmu: iommu@e0200000 {
+			compatible = "arm,mmu-401";
+			reg = <0 0xe0200000 0 0x10000>;
+			#global-interrupts = <1>;
+			interrupts = <0 332 4>, <0 332 4>;
+			#iommu-cells = <2>;
+			dma-coherent;
+		};
+
+		sata1_smmu: iommu@e0c00000 {
+			compatible = "arm,mmu-401";
+			reg = <0 0xe0c00000 0 0x10000>;
+			#global-interrupts = <1>;
+			interrupts = <0 331 4>, <0 331 4>;
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		i2c0: i2c@e1000000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe1000000 0 0x1000>;
+			interrupts = <0 357 4>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c@e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		serial0: serial@e1010000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0xe1010000 0 0x1000>;
+			interrupts = <0 328 4>;
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi0: spi@e1020000 {
+			status = "disabled";
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0xe1020000 0 0x1000>;
+			spi-controller;
+			interrupts = <0 330 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		spi1: spi@e1030000 {
+			status = "disabled";
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0xe1030000 0 0x1000>;
+			spi-controller;
+			interrupts = <0 329 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1040000 0 0x1000>;
+			gpio-controller;
+			interrupts = <0 359 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e1050000 { /* [0:7] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1050000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 358 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		ccp0: ccp@e0100000 {
+			status = "disabled";
+			compatible = "amd,ccp-seattle-v1a";
+			reg = <0 0xe0100000 0 0x10000>;
+			interrupts = <0 3 4>;
+			dma-coherent;
+			iommus = <&sata1_smmu 0x00>,
+				 <&sata1_smmu 0x02>,
+				 <&sata1_smmu 0x40>,
+				 <&sata1_smmu 0x42>;
+		};
+
+		pcie0: pcie@f0000000 {
+			compatible = "pci-host-ecam-generic";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			bus-range = <0 0x7f>;
+			msi-parent = <&v2m0>;
+			reg = <0 0xf0000000 0 0x10000000>;
+
+			interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+			interrupt-map =
+				<0x1100 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
+				<0x1100 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
+				<0x1100 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
+				<0x1100 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>,
+
+				<0x1200 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x124 0x1>,
+				<0x1200 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x125 0x1>,
+				<0x1200 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x126 0x1>,
+				<0x1200 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x127 0x1>,
+
+				<0x1300 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x128 0x1>,
+				<0x1300 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x129 0x1>,
+				<0x1300 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x12a 0x1>,
+				<0x1300 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x12b 0x1>;
+
+			dma-coherent;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
+			ranges =
+				/* I/O Memory (size=64K) */
+				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
+				/* 32-bit MMIO (size=2G) */
+				<0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
+				/* 64-bit MMIO (size= 508G) */
+				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
+			iommu-map = <0x0 &pcie_smmu 0x0 0x10000>;
+		};
+
+		pcie_smmu: iommu@e0a00000 {
+			compatible = "arm,mmu-401";
+			reg = <0 0xe0a00000 0 0x10000>;
+			#global-interrupts = <1>;
+			interrupts = <0 333 4>, <0 333 4>;
+			#iommu-cells = <1>;
+			dma-coherent;
+		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn@e8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
+
+		ipmi_kcs: kcs@e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 000000000..9259e547e
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		iommus = <&xgmac0_smmu 0x00 0x17>; /* 0-7, 16-23 */
+		dma-coherent;
+	};
+
+	xgmac1: xgmac@e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		iommus = <&xgmac1_smmu 0x00 0x17>; /* 0-7, 16-23 */
+		dma-coherent;
+	};
+
+	xgmac0_smmu: iommu@e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+		#iommu-cells = <2>;
+		dma-coherent;
+	 };
+
+	 xgmac1_smmu: iommu@e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+		#iommu-cells = <2>;
+		dma-coherent;
+	 };
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000..8b6f57a94
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
+dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-bananapi-m2s.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-go-ultra.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-gt1-ultimate.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m2-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
new file mode 100644
index 000000000..edce8850b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-c3.dtsi"
+
+/ {
+	model = "Amlogic C302 aw409 Development Board";
+	compatible = "amlogic,aw409", "amlogic,c3";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_b;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x10000000>;
+	};
+};
+
+&uart_b {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
new file mode 100644
index 000000000..998f50507
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,c3-pwrc";
+			#power-domain-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,c3-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x004c>,
+					      <0x0 0x4100 0x0 0x01de>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 55>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,meson-gpio-intc",
+					     "amlogic,c3-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x0020>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			uart_b: serial@7a000 {
+				compatible = "amlogic,meson-s4-uart",
+					   "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
new file mode 100644
index 000000000..c05edebb9
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-an400.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+	model = "Amlogic A311D2 AN400 Development Board";
+	compatible = "amlogic,an400", "amlogic,a311d2", "amlogic,t7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_a;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xE0000000
+			0x00000001 0x00000000 0x00000000 0x20000000>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
+
+&uart_a {
+	clocks = <&xtal>, <&xtal>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
new file mode 100644
index 000000000..fffdab96b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Wesion, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "amlogic-t7.dtsi"
+
+/ {
+	model = "Khadas vim4";
+	compatible = "khadas,vim4", "amlogic,a311d2", "amlogic,t7";
+
+	aliases {
+		serial0 = &uart_a;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x2 0x0>; /* 8 GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+};
+
+&uart_a {
+	status = "okay";
+	clocks = <&xtal>, <&xtal>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
new file mode 100644
index 000000000..1423d4a79
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+				core1 {
+					cpu = <&cpu101>;
+				};
+				core2 {
+					cpu = <&cpu102>;
+				};
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu101: cpu@101{
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x0100>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_a: serial@78000 {
+				compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
+				reg = <0x0 0x78000 0x0 0x18>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
new file mode 100644
index 000000000..69c25c68c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-a1.dtsi"
+
+/ {
+	compatible = "amlogic,ad401", "amlogic,a1";
+	model = "Amlogic Meson A1 AD401 Development Board";
+
+	aliases {
+		serial0 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x8000000>;
+	};
+};
+
+&uart_AO_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
new file mode 100644
index 000000000..96225c421
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
+
+/ {
+	compatible = "amlogic,a1";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x800000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,meson-a1-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apb: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x1000000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
+
+
+			reset: reset-controller@0 {
+				compatible = "amlogic,meson-a1-reset";
+				reg = <0x0 0x0 0x0 0x8c>;
+				#reset-cells = <1>;
+			};
+
+			periphs_pinctrl: pinctrl@400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
+			uart_AO: serial@1c00 {
+				compatible = "amlogic,meson-a1-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x1c00 0x0 0x18>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@2000 {
+				compatible = "amlogic,meson-a1-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x2000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			gpio_intc: interrupt-controller@0440 {
+				compatible = "amlogic,meson-a1-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x0440 0x0 0x14>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<49 50 51 52 53 54 55 56>;
+			};
+		};
+
+		gic: interrupt-controller@ff901000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xff901000 0x0 0x1000>,
+			      <0x0 0xff902000 0x0 0x2000>,
+			      <0x0 0xff904000 0x0 0x2000>,
+			      <0x0 0xff906000 0x0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
new file mode 100644
index 000000000..b2d6ba660
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1 (J100)";
+
+	/* 1024MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	non-removable;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* UART Bluetooth */
+&uart_B {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
new file mode 100644
index 000000000..0062667c4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) HW rev.2";
+
+	/* 2GiB or 4GiB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
+
+/* UART Bluetooth */
+&uart_B {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
new file mode 100644
index 000000000..c2d22b00c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-axg-jethome-jethub-j1xx.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j110", "amlogic,a113d", "amlogic,meson-axg";
+	model = "JetHome JetHub D1p (J110) Hw rev.3";
+
+	/* 2GiB or 4GiB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+
+/* wifi module */
+&sd_emmc_b {
+	broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
new file mode 100644
index 000000000..db605f3a2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2022 JetHome
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
+ * Author: Alexey Shevelkin <ash@tvip.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;   /* Console */
+		serial2 = &uart_AO_B; /* External UART (Wireless Module) */
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0x0 0x400000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vccq_1v8: regulator-vccq_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCQ_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&scpi_sensors 0>;
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&efuse {
+	sn: sn@32 {
+		reg = <0x32 0x20>;
+	};
+
+	eth_mac: eth-mac@0 {
+		reg = <0x0 0x6>;
+	};
+
+	bt_mac: bt-mac@6 {
+		reg = <0x6 0x6>;
+	};
+
+	wifi_mac: wifi-mac@c {
+		reg = <0xc 0x6>;
+	};
+
+	bid: bid@12 {
+		reg = <0x12 0x20>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_x_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
+		eth_phy0: ethernet-phy@0 {
+			/* compatible = "ethernet-phy-id0243.0c54";*/
+			max-speed = <100>;
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Internal I2C bus (on CPU module) */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	/* RTC */
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		status = "okay";
+	};
+};
+
+/* Peripheral I2C bus (on motherboard) */
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccq_1v8>;
+};
+
+/* UART Bluetooth */
+&uart_B {
+	status = "okay";
+	pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+/* UART Console */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* UART Wireless module */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr>;
+};
+
+&spicc1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio {
+	gpio-line-names =
+		"", "", "", "", "", // 0 - 4
+		"", "", "", "", "", // 5 - 9
+		"UserButton", "", "", "", "", // 10 - 14
+		"", "", "", "", "", // 15 - 19
+		"", "", "", "", "", // 20 - 24
+		"", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
+		"Output1", "", "", "", "", // 30 - 34
+		"", "ZigBeeBOOT", "", "", "", // 35 - 39
+		"1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
+		"Input2", "Input1", "", "", "", // 45 - 49
+		"", "", "", "", "", // 50 - 54
+		"", "", "", "", "", // 55 - 59
+		"", "", "", "", "", // 60 - 64
+		"", "", "", "", "", // 65 - 69
+		"", "", "", "", "", // 70 - 74
+		"", "", "", "", "", // 75 - 79
+		"", "", "", "", "", // 80 - 84
+		"", ""; // 85-86
+};
+
+&cpu0 {
+	#cooling-cells = <2>;
+};
+
+&cpu1 {
+	#cooling-cells = <2>;
+};
+
+&cpu2 {
+	#cooling-cells = <2>;
+};
+
+&cpu3 {
+	#cooling-cells = <2>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
new file mode 100644
index 000000000..df16eead2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
+	model = "Amlogic Meson AXG S400 Development Board";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-next {
+			label = "Next";
+			linux,code = <KEY_NEXT>;
+			press-threshold-microvolt = <1116000>; /* 62% */
+		};
+
+		button-prev {
+			label = "Previous";
+			linux,code = <KEY_PREVIOUS>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-wifi {
+			label = "Wifi";
+			linux,code = <KEY_WLAN>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-voice {
+			label = "Voice";
+			linux,code = <KEY_VOICECOMMAND>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	linein: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7241";
+		VDDA-supply = <&vcc_3v3>;
+		VDDP-supply = <&vcc_3v3>;
+		VDDD-supply = <&vcc_3v3>;
+		status = "okay";
+		sound-name-prefix = "Linein";
+	};
+
+	lineout: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7154";
+		VDD-supply = <&vcc_3v3>;
+		PVDD-supply = <&vcc_5v>;
+		status = "okay";
+		sound-name-prefix = "Lineout";
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	dmics: audio-codec-3 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <7>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	spdif_dir: audio-codec-4 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+		status = "okay";
+		sound-name-prefix = "DIR";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "AXG-S400";
+		audio-aux-devs = <&tdmin_a>, <&tdmin_b>,  <&tdmin_c>,
+				 <&tdmin_lb>, <&tdmout_c>;
+		audio-widgets = "Line", "Lineout",
+				"Line", "Linein",
+				"Speaker", "Speaker1 Left",
+				"Speaker", "Speaker1 Right";
+		audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 2", "TDM_C Capture",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 2", "TDM_C Capture",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 2", "TDM_C Capture",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TDMIN_LB IN 5", "TDM_C Capture",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 3", "SPDIFIN Capture",
+				"TODDR_B IN 3", "SPDIFIN Capture",
+				"TODDR_C IN 3", "SPDIFIN Capture",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"Lineout", "Lineout AOUTL",
+				"Lineout", "Lineout AOUTR",
+				"Speaker1 Left", "SPK1 OUT_A",
+				"Speaker1 Left", "SPK1 OUT_B",
+				"Speaker1 Right", "SPK1 OUT_C",
+				"Speaker1 Right", "SPK1 OUT_D",
+				"Linein AINL", "Linein",
+				"Linein AINR", "Linein";
+		assigned-clocks = <&clkc CLKID_HIFI_PLL>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <589824000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		dai-link-6 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-rx-mask-1 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&lineout>;
+			};
+
+			codec-1 {
+				sound-dai = <&speaker_amp1>;
+			};
+
+			codec-2 {
+				sound-dai = <&linein>;
+			};
+
+		};
+
+		dai-link-7 {
+			sound-dai = <&spdifout>;
+
+			codec {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-8 {
+			sound-dai = <&spdifin>;
+
+			codec {
+				sound-dai = <&spdif_dir>;
+			};
+		};
+
+		dai-link-9 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_y_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_z_pins>;
+	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec@1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+		sound-name-prefix = "SPK1";
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
+	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
+		    <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pcieA {
+	reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcieB {
+	reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_x20_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* wifi module */
+&sd_emmc_b {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* emmc storage */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spdifin {
+	pinctrl-0 = <&spdif_in_a19_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_a20_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
+		    <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_b {
+	pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
+		    <&tdmb_din3_pins>, <&mclk_b_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmif_c {
+	pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
+		    <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
+		    <&mclk_c_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+	vbus-supply = <&usb_pwr>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
new file mode 100644
index 000000000..768d0ed78
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -0,0 +1,1959 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/clock/axg-clkc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/power/meson-axg-power.h>
+
+/ {
+	compatible = "amlogic,meson-axg";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+	};
+
+	scpi {
+		compatible = "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcieA: pcie@f9800000 {
+			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+			reg = <0x0 0xf9800000 0x0 0x400000>,
+			      <0x0 0xff646000 0x0 0x2000>,
+			      <0x0 0xf9f00000 0x0 0x100000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>;
+			clock-names = "general", "pclk", "port";
+			resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>;
+			reset-names = "port", "apb";
+			num-lanes = <1>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		pcieB: pcie@fa000000 {
+			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+			reg = <0x0 0xfa000000 0x0 0x400000>,
+			      <0x0 0xff648000 0x0 0x2000>,
+			      <0x0 0xfa400000 0x0 0x100000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>;
+			clock-names = "general", "pclk", "port";
+			resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>;
+			reset-names = "port", "apb";
+			num-lanes = <1>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		usb: usb@ffe09080 {
+			compatible = "amlogic,meson-axg-usb-ctrl";
+			reg = <0x0 0xffe09080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
+			resets = <&reset RESET_USB_OTG>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		ethmac: ethernet@ff3f0000 {
+			compatible = "amlogic,meson-axg-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
+			status = "disabled";
+		};
+
+		pcie_phy: phy@ff644000 {
+			compatible = "amlogic,axg-pcie-phy";
+			reg = <0x0 0xff644000 0x0 0x1c>;
+			resets = <&reset RESET_PCIE_PHY>;
+			phys = <&mipi_pcie_analog_dphy>;
+			phy-names = "analog";
+			#phy-cells = <0>;
+		};
+
+		pdm: audio-controller@ff632000 {
+			compatible = "amlogic,axg-pdm";
+			reg = <0x0 0xff632000 0x0 0x34>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "PDM";
+			clocks = <&clkc_audio AUD_CLKID_PDM>,
+				 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+				 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+			clock-names = "pclk", "dclk", "sysclk";
+			status = "disabled";
+		};
+
+		periphs: bus@ff634000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff634000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+
+			hwrng: rng@18 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x18 0x0 0x4>;
+				clocks = <&clkc CLKID_RNG0>;
+				clock-names = "core";
+			};
+
+			pinctrl_periphs: pinctrl@480 {
+				compatible = "amlogic,meson-axg-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@480 {
+					reg = <0x0 0x00480 0x0 0x40>,
+					      <0x0 0x004e8 0x0 0x14>,
+					      <0x0 0x00520 0x0 0x14>,
+					      <0x0 0x00430 0x0 0x3c>;
+					reg-names = "mux", "pull", "pull-enable", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_periphs 0 0 86>;
+				};
+
+				i2c0_pins: i2c0 {
+					mux {
+						groups = "i2c0_sck",
+							 "i2c0_sda";
+						function = "i2c0";
+						bias-disable;
+					};
+				};
+
+				i2c1_x_pins: i2c1_x {
+					mux {
+						groups = "i2c1_sck_x",
+							 "i2c1_sda_x";
+						function = "i2c1";
+						bias-disable;
+					};
+				};
+
+				i2c1_z_pins: i2c1_z {
+					mux {
+						groups = "i2c1_sck_z",
+							 "i2c1_sda_z";
+						function = "i2c1";
+						bias-disable;
+					};
+				};
+
+				i2c2_a_pins: i2c2_a {
+					mux {
+						groups = "i2c2_sck_a",
+							 "i2c2_sda_a";
+						function = "i2c2";
+						bias-disable;
+					};
+				};
+
+				i2c2_x_pins: i2c2_x {
+					mux {
+						groups = "i2c2_sck_x",
+							 "i2c2_sda_x";
+						function = "i2c2";
+						bias-disable;
+					};
+				};
+
+				i2c3_a6_pins: i2c3_a6 {
+					mux {
+						groups = "i2c3_sda_a6",
+							 "i2c3_sck_a7";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				i2c3_a12_pins: i2c3_a12 {
+					mux {
+						groups = "i2c3_sda_a12",
+							 "i2c3_sck_a13";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				i2c3_a19_pins: i2c3_a19 {
+					mux {
+						groups = "i2c3_sda_a19",
+							 "i2c3_sck_a20";
+						function = "i2c3";
+						bias-disable;
+					};
+				};
+
+				emmc_pins: emmc {
+					mux-0 {
+						groups = "emmc_nand_d0",
+							 "emmc_nand_d1",
+							 "emmc_nand_d2",
+							 "emmc_nand_d3",
+							 "emmc_nand_d4",
+							 "emmc_nand_d5",
+							 "emmc_nand_d6",
+							 "emmc_nand_d7",
+							 "emmc_cmd";
+						function = "emmc";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "emmc_clk";
+						function = "emmc";
+						bias-disable;
+					};
+				};
+
+				emmc_ds_pins: emmc_ds {
+					mux {
+						groups = "emmc_ds";
+						function = "emmc";
+						bias-pull-down;
+					};
+				};
+
+				emmc_clk_gate_pins: emmc_clk_gate {
+					mux {
+						groups = "BOOT_8";
+						function = "gpio_periphs";
+						bias-pull-down;
+					};
+				};
+
+				eth_rgmii_x_pins: eth-x-rgmii {
+					mux {
+						groups = "eth_mdio_x",
+							 "eth_mdc_x",
+							 "eth_rgmii_rx_clk_x",
+							 "eth_rx_dv_x",
+							 "eth_rxd0_x",
+							 "eth_rxd1_x",
+							 "eth_rxd2_rgmii",
+							 "eth_rxd3_rgmii",
+							 "eth_rgmii_tx_clk",
+							 "eth_txen_x",
+							 "eth_txd0_x",
+							 "eth_txd1_x",
+							 "eth_txd2_rgmii",
+							 "eth_txd3_rgmii";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rgmii_y_pins: eth-y-rgmii {
+					mux {
+						groups = "eth_mdio_y",
+							 "eth_mdc_y",
+							 "eth_rgmii_rx_clk_y",
+							 "eth_rx_dv_y",
+							 "eth_rxd0_y",
+							 "eth_rxd1_y",
+							 "eth_rxd2_rgmii",
+							 "eth_rxd3_rgmii",
+							 "eth_rgmii_tx_clk",
+							 "eth_txen_y",
+							 "eth_txd0_y",
+							 "eth_txd1_y",
+							 "eth_txd2_rgmii",
+							 "eth_txd3_rgmii";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rmii_x_pins: eth-x-rmii {
+					mux {
+						groups = "eth_mdio_x",
+							 "eth_mdc_x",
+							 "eth_rgmii_rx_clk_x",
+							 "eth_rx_dv_x",
+							 "eth_rxd0_x",
+							 "eth_rxd1_x",
+							 "eth_txen_x",
+							 "eth_txd0_x",
+							 "eth_txd1_x";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				eth_rmii_y_pins: eth-y-rmii {
+					mux {
+						groups = "eth_mdio_y",
+							 "eth_mdc_y",
+							 "eth_rgmii_rx_clk_y",
+							 "eth_rx_dv_y",
+							 "eth_rxd0_y",
+							 "eth_rxd1_y",
+							 "eth_txen_y",
+							 "eth_txd0_y",
+							 "eth_txd1_y";
+						function = "eth";
+						bias-disable;
+					};
+				};
+
+				mclk_b_pins: mclk_b {
+					mux {
+						groups = "mclk_b";
+						function = "mclk_b";
+						bias-disable;
+					};
+				};
+
+				mclk_c_pins: mclk_c {
+					mux {
+						groups = "mclk_c";
+						function = "mclk_c";
+						bias-disable;
+					};
+				};
+
+				pdm_dclk_a14_pins: pdm_dclk_a14 {
+					mux {
+						groups = "pdm_dclk_a14";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_dclk_a19_pins: pdm_dclk_a19 {
+					mux {
+						groups = "pdm_dclk_a19";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din0_pins: pdm_din0 {
+					mux {
+						groups = "pdm_din0";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din1_pins: pdm_din1 {
+					mux {
+						groups = "pdm_din1";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din2_pins: pdm_din2 {
+					mux {
+						groups = "pdm_din2";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pdm_din3_pins: pdm_din3 {
+					mux {
+						groups = "pdm_din3";
+						function = "pdm";
+						bias-disable;
+					};
+				};
+
+				pwm_a_a_pins: pwm_a_a {
+					mux {
+						groups = "pwm_a_a";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_x18_pins: pwm_a_x18 {
+					mux {
+						groups = "pwm_a_x18";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_x20_pins: pwm_a_x20 {
+					mux {
+						groups = "pwm_a_x20";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_a_z_pins: pwm_a_z {
+					mux {
+						groups = "pwm_a_z";
+						function = "pwm_a";
+						bias-disable;
+					};
+				};
+
+				pwm_b_a_pins: pwm_b_a {
+					mux {
+						groups = "pwm_b_a";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_b_x_pins: pwm_b_x {
+					mux {
+						groups = "pwm_b_x";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_b_z_pins: pwm_b_z {
+					mux {
+						groups = "pwm_b_z";
+						function = "pwm_b";
+						bias-disable;
+					};
+				};
+
+				pwm_c_a_pins: pwm_c_a {
+					mux {
+						groups = "pwm_c_a";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_c_x10_pins: pwm_c_x10 {
+					mux {
+						groups = "pwm_c_x10";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_c_x17_pins: pwm_c_x17 {
+					mux {
+						groups = "pwm_c_x17";
+						function = "pwm_c";
+						bias-disable;
+					};
+				};
+
+				pwm_d_x11_pins: pwm_d_x11 {
+					mux {
+						groups = "pwm_d_x11";
+						function = "pwm_d";
+						bias-disable;
+					};
+				};
+
+				pwm_d_x16_pins: pwm_d_x16 {
+					mux {
+						groups = "pwm_d_x16";
+						function = "pwm_d";
+						bias-disable;
+					};
+				};
+
+				sdio_pins: sdio {
+					mux-0 {
+						groups = "sdio_d0",
+							 "sdio_d1",
+							 "sdio_d2",
+							 "sdio_d3",
+							 "sdio_cmd";
+						function = "sdio";
+						bias-pull-up;
+					};
+
+					mux-1 {
+						groups = "sdio_clk";
+						function = "sdio";
+						bias-disable;
+					};
+				};
+
+				sdio_clk_gate_pins: sdio_clk_gate {
+					mux {
+						groups = "GPIOX_4";
+						function = "gpio_periphs";
+						bias-pull-down;
+					};
+				};
+
+				spdif_in_z_pins: spdif_in_z {
+					mux {
+						groups = "spdif_in_z";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a1_pins: spdif_in_a1 {
+					mux {
+						groups = "spdif_in_a1";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a7_pins: spdif_in_a7 {
+					mux {
+						groups = "spdif_in_a7";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a19_pins: spdif_in_a19 {
+					mux {
+						groups = "spdif_in_a19";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_in_a20_pins: spdif_in_a20 {
+					mux {
+						groups = "spdif_in_a20";
+						function = "spdif_in";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a1_pins: spdif_out_a1 {
+					mux {
+						groups = "spdif_out_a1";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a11_pins: spdif_out_a11 {
+					mux {
+						groups = "spdif_out_a11";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a19_pins: spdif_out_a19 {
+					mux {
+						groups = "spdif_out_a19";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_a20_pins: spdif_out_a20 {
+					mux {
+						groups = "spdif_out_a20";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spdif_out_z_pins: spdif_out_z {
+					mux {
+						groups = "spdif_out_z";
+						function = "spdif_out";
+						bias-disable;
+					};
+				};
+
+				spi0_pins: spi0 {
+					mux {
+						groups = "spi0_miso",
+							 "spi0_mosi",
+							 "spi0_clk";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss0_pins: spi0_ss0 {
+					mux {
+						groups = "spi0_ss0";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss1_pins: spi0_ss1 {
+					mux {
+						groups = "spi0_ss1";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi0_ss2_pins: spi0_ss2 {
+					mux {
+						groups = "spi0_ss2";
+						function = "spi0";
+						bias-disable;
+					};
+				};
+
+				spi1_a_pins: spi1_a {
+					mux {
+						groups = "spi1_miso_a",
+							 "spi1_mosi_a",
+							 "spi1_clk_a";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss0_a_pins: spi1_ss0_a {
+					mux {
+						groups = "spi1_ss0_a";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss1_pins: spi1_ss1 {
+					mux {
+						groups = "spi1_ss1";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_x_pins: spi1_x {
+					mux {
+						groups = "spi1_miso_x",
+							 "spi1_mosi_x",
+							 "spi1_clk_x";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				spi1_ss0_x_pins: spi1_ss0_x {
+					mux {
+						groups = "spi1_ss0_x";
+						function = "spi1";
+						bias-disable;
+					};
+				};
+
+				tdma_din0_pins: tdma_din0 {
+					mux {
+						groups = "tdma_din0";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout0_x14_pins: tdma_dout0_x14 {
+					mux {
+						groups = "tdma_dout0_x14";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout0_x15_pins: tdma_dout0_x15 {
+					mux {
+						groups = "tdma_dout0_x15";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_dout1_pins: tdma_dout1 {
+					mux {
+						groups = "tdma_dout1";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_din1_pins: tdma_din1 {
+					mux {
+						groups = "tdma_din1";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_fs_pins: tdma_fs {
+					mux {
+						groups = "tdma_fs";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_fs_slv_pins: tdma_fs_slv {
+					mux {
+						groups = "tdma_fs_slv";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_sclk_pins: tdma_sclk {
+					mux {
+						groups = "tdma_sclk";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdma_sclk_slv_pins: tdma_sclk_slv {
+					mux {
+						groups = "tdma_sclk_slv";
+						function = "tdma";
+						bias-disable;
+					};
+				};
+
+				tdmb_din0_pins: tdmb_din0 {
+					mux {
+						groups = "tdmb_din0";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din1_pins: tdmb_din1 {
+					mux {
+						groups = "tdmb_din1";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din2_pins: tdmb_din2 {
+					mux {
+						groups = "tdmb_din2";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_din3_pins: tdmb_din3 {
+					mux {
+						groups = "tdmb_din3";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout0_pins: tdmb_dout0 {
+					mux {
+						groups = "tdmb_dout0";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout1_pins: tdmb_dout1 {
+					mux {
+						groups = "tdmb_dout1";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout2_pins: tdmb_dout2 {
+					mux {
+						groups = "tdmb_dout2";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_dout3_pins: tdmb_dout3 {
+					mux {
+						groups = "tdmb_dout3";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_fs_pins: tdmb_fs {
+					mux {
+						groups = "tdmb_fs";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_fs_slv_pins: tdmb_fs_slv {
+					mux {
+						groups = "tdmb_fs_slv";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_sclk_pins: tdmb_sclk {
+					mux {
+						groups = "tdmb_sclk";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmb_sclk_slv_pins: tdmb_sclk_slv {
+					mux {
+						groups = "tdmb_sclk_slv";
+						function = "tdmb";
+						bias-disable;
+					};
+				};
+
+				tdmc_fs_pins: tdmc_fs {
+					mux {
+						groups = "tdmc_fs";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_fs_slv_pins: tdmc_fs_slv {
+					mux {
+						groups = "tdmc_fs_slv";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_sclk_pins: tdmc_sclk {
+					mux {
+						groups = "tdmc_sclk";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_sclk_slv_pins: tdmc_sclk_slv {
+					mux {
+						groups = "tdmc_sclk_slv";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din0_pins: tdmc_din0 {
+					mux {
+						groups = "tdmc_din0";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din1_pins: tdmc_din1 {
+					mux {
+						groups = "tdmc_din1";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din2_pins: tdmc_din2 {
+					mux {
+						groups = "tdmc_din2";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_din3_pins: tdmc_din3 {
+					mux {
+						groups = "tdmc_din3";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout0_pins: tdmc_dout0 {
+					mux {
+						groups = "tdmc_dout0";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout1_pins: tdmc_dout1 {
+					mux {
+						groups = "tdmc_dout1";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout2_pins: tdmc_dout2 {
+					mux {
+						groups = "tdmc_dout2";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				tdmc_dout3_pins: tdmc_dout3 {
+					mux {
+						groups = "tdmc_dout3";
+						function = "tdmc";
+						bias-disable;
+					};
+				};
+
+				uart_a_pins: uart_a {
+					mux {
+						groups = "uart_tx_a",
+							 "uart_rx_a";
+						function = "uart_a";
+						bias-disable;
+					};
+				};
+
+				uart_a_cts_rts_pins: uart_a_cts_rts {
+					mux {
+						groups = "uart_cts_a",
+							 "uart_rts_a";
+						function = "uart_a";
+						bias-disable;
+					};
+				};
+
+				uart_b_x_pins: uart_b_x {
+					mux {
+						groups = "uart_tx_b_x",
+							 "uart_rx_b_x";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
+					mux {
+						groups = "uart_cts_b_x",
+							 "uart_rts_b_x";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_z_pins: uart_b_z {
+					mux {
+						groups = "uart_tx_b_z",
+							 "uart_rx_b_z";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
+					mux {
+						groups = "uart_cts_b_z",
+							 "uart_rts_b_z";
+						function = "uart_b";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_z_pins: uart_ao_b_z {
+					mux {
+						groups = "uart_ao_tx_b_z",
+							 "uart_ao_rx_b_z";
+						function = "uart_ao_b_z";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+					mux {
+						groups = "uart_ao_cts_b_z",
+							 "uart_ao_rts_b_z";
+						function = "uart_ao_b_z";
+						bias-disable;
+					};
+				};
+			};
+		};
+
+		hiubus: bus@ff63c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff63c000 0x0 0x1c00>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+			sysctrl: system-controller@0 {
+				compatible = "amlogic,meson-axg-hhi-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0 0 0 0x400>;
+
+				clkc: clock-controller {
+					compatible = "amlogic,axg-clkc";
+					#clock-cells = <1>;
+					clocks = <&xtal>;
+					clock-names = "xtal";
+				};
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-axg-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+					resets = <&reset RESET_VIU>,
+						 <&reset RESET_VENC>,
+						 <&reset RESET_VCBUS>,
+						 <&reset RESET_VENCL>,
+						 <&reset RESET_VID_LOCK>;
+					reset-names = "viu", "venc", "vcbus",
+						      "vencl", "vid_lock";
+					clocks = <&clkc CLKID_VPU>,
+						 <&clkc CLKID_VAPB>;
+					clock-names = "vpu", "vapb";
+					/*
+					 * VPU clocking is provided by two identical clock paths
+					 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+					 * free mux to safely change frequency while running.
+					 * Same for VAPB but with a final gate after the glitch free mux.
+					 */
+					assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+							  <&clkc CLKID_VPU_0>,
+							  <&clkc CLKID_VPU>, /* Glitch free mux */
+							  <&clkc CLKID_VAPB_0_SEL>,
+							  <&clkc CLKID_VAPB_0>,
+							  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+					assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>,
+								 <0>, /* Do Nothing */
+								 <&clkc CLKID_VPU_0>,
+								 <&clkc CLKID_FCLK_DIV4>,
+								 <0>, /* Do Nothing */
+								 <&clkc CLKID_VAPB_0>;
+					assigned-clock-rates = <0>, /* Do Nothing */
+							       <250000000>,
+							       <0>, /* Do Nothing */
+							       <0>, /* Do Nothing */
+							       <250000000>,
+							       <0>; /* Do Nothing */
+				};
+
+				mipi_pcie_analog_dphy: phy {
+					compatible = "amlogic,axg-mipi-pcie-analog-phy";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		mailbox: mailbox@ff63c404 {
+			compatible = "amlogic,meson-gxbb-mhu";
+			reg = <0 0xff63c404 0 0x4c>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+			#mbox-cells = <1>;
+		};
+
+		mipi_dphy: phy@ff640000 {
+			compatible = "amlogic,axg-mipi-dphy";
+			reg = <0x0 0xff640000 0x0 0x100>;
+			clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+			clock-names = "pclk";
+			resets = <&reset RESET_MIPI_PHY>;
+			reset-names = "phy";
+			phys = <&mipi_pcie_analog_dphy>;
+			phy-names = "analog";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		audio: bus@ff642000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff642000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+			clkc_audio: clock-controller@0 {
+				compatible = "amlogic,axg-audio-clkc";
+				reg = <0x0 0x0 0x0 0xb4>;
+				#clock-cells = <1>;
+
+				clocks = <&clkc CLKID_AUDIO>,
+					 <&clkc CLKID_MPLL0>,
+					 <&clkc CLKID_MPLL1>,
+					 <&clkc CLKID_MPLL2>,
+					 <&clkc CLKID_MPLL3>,
+					 <&clkc CLKID_HIFI_PLL>,
+					 <&clkc CLKID_FCLK_DIV3>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_GP0_PLL>;
+				clock-names = "pclk",
+					      "mst_in0",
+					      "mst_in1",
+					      "mst_in2",
+					      "mst_in3",
+					      "mst_in4",
+					      "mst_in5",
+					      "mst_in6",
+					      "mst_in7";
+
+				resets = <&reset RESET_AUDIO>;
+			};
+
+			toddr_a: audio-controller@100 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x100 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_A";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+				resets = <&arb AXG_ARB_TODDR_A>;
+				amlogic,fifo-depth = <512>;
+				status = "disabled";
+			};
+
+			toddr_b: audio-controller@140 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x140 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_B";
+				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+				resets = <&arb AXG_ARB_TODDR_B>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			toddr_c: audio-controller@180 {
+				compatible = "amlogic,axg-toddr";
+				reg = <0x0 0x180 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "TODDR_C";
+				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+				resets = <&arb AXG_ARB_TODDR_C>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			frddr_a: audio-controller@1c0 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x1c0 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_A";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+				resets = <&arb AXG_ARB_FRDDR_A>;
+				amlogic,fifo-depth = <512>;
+				status = "disabled";
+			};
+
+			frddr_b: audio-controller@200 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x200 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_B";
+				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+				resets = <&arb AXG_ARB_FRDDR_B>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			frddr_c: audio-controller@240 {
+				compatible = "amlogic,axg-frddr";
+				reg = <0x0 0x240 0x0 0x2c>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "FRDDR_C";
+				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+				resets = <&arb AXG_ARB_FRDDR_C>;
+				amlogic,fifo-depth = <256>;
+				status = "disabled";
+			};
+
+			arb: reset-controller@280 {
+				compatible = "amlogic,meson-axg-audio-arb";
+				reg = <0x0 0x280 0x0 0x4>;
+				#reset-cells = <1>;
+				clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+			};
+
+			tdmin_a: audio-controller@300 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x300 0x0 0x40>;
+				sound-name-prefix = "TDMIN_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_b: audio-controller@340 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x340 0x0 0x40>;
+				sound-name-prefix = "TDMIN_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_c: audio-controller@380 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x380 0x0 0x40>;
+				sound-name-prefix = "TDMIN_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_lb: audio-controller@3c0 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x3c0 0x0 0x40>;
+				sound-name-prefix = "TDMIN_LB";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			spdifin: audio-controller@400 {
+				compatible = "amlogic,axg-spdifin";
+				reg = <0x0 0x400 0x0 0x30>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFIN";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+					 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+				clock-names = "pclk", "refclk";
+				status = "disabled";
+			};
+
+			spdifout: audio-controller@480 {
+				compatible = "amlogic,axg-spdifout";
+				reg = <0x0 0x480 0x0 0x50>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFOUT";
+				clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+					 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+				clock-names = "pclk", "mclk";
+				status = "disabled";
+			};
+
+			tdmout_a: audio-controller@500 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x500 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_b: audio-controller@540 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x540 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_c: audio-controller@580 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x580 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+		};
+
+		aobus: bus@ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-axg-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+			};
+
+			pinctrl_aobus: pinctrl@14 {
+				compatible = "amlogic,meson-axg-aobus-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio_ao: bank@14 {
+					reg = <0x0 0x00014 0x0 0x8>,
+					      <0x0 0x0002c 0x0 0x4>,
+					      <0x0 0x00024 0x0 0x8>;
+					reg-names = "mux", "pull", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_aobus 0 0 15>;
+				};
+
+				i2c_ao_sck_4_pins: i2c_ao_sck_4 {
+					mux {
+						groups = "i2c_ao_sck_4";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sck_8_pins: i2c_ao_sck_8 {
+					mux {
+						groups = "i2c_ao_sck_8";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sck_10_pins: i2c_ao_sck_10 {
+					mux {
+						groups = "i2c_ao_sck_10";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_5_pins: i2c_ao_sda_5 {
+					mux {
+						groups = "i2c_ao_sda_5";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_9_pins: i2c_ao_sda_9 {
+					mux {
+						groups = "i2c_ao_sda_9";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				i2c_ao_sda_11_pins: i2c_ao_sda_11 {
+					mux {
+						groups = "i2c_ao_sda_11";
+						function = "i2c_ao";
+						bias-disable;
+					};
+				};
+
+				remote_input_ao_pins: remote_input_ao {
+					mux {
+						groups = "remote_input_ao";
+						function = "remote_input_ao";
+						bias-disable;
+					};
+				};
+
+				uart_ao_a_pins: uart_ao_a {
+					mux {
+						groups = "uart_ao_tx_a",
+							 "uart_ao_rx_a";
+						function = "uart_ao_a";
+						bias-disable;
+					};
+				};
+
+				uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+					mux {
+						groups = "uart_ao_cts_a",
+							 "uart_ao_rts_a";
+						function = "uart_ao_a";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_pins: uart_ao_b {
+					mux {
+						groups = "uart_ao_tx_b",
+							 "uart_ao_rx_b";
+						function = "uart_ao_b";
+						bias-disable;
+					};
+				};
+
+				uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+					mux {
+						groups = "uart_ao_cts_b",
+							 "uart_ao_rts_b";
+						function = "uart_ao_b";
+						bias-disable;
+					};
+				};
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x02000  0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@3000 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4000 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_AO_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-axg-ao-pwm";
+				reg = <0x0 0x07000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-axg-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x38>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		ge2d: ge2d@ff940000 {
+			compatible = "amlogic,axg-ge2d";
+			reg = <0x0 0xff940000 0x0 0x10000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_VAPB>;
+			resets = <&reset RESET_GE2D>;
+		};
+
+		gic: interrupt-controller@ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus@ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x25000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x01004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-axg-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			watchdog@f0d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0xf0d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-axg-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-axg-spicc";
+				reg = <0x0 0x13000 0x0 0x3c>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>;
+				clock-names = "core";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-axg-spicc";
+				reg = <0x0 0x15000 0x0 0x3c>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>;
+				clock-names = "core";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-axg-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart_B: serial@23000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+			uart_A: serial@24000 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				fifo-size = <128>;
+			};
+		};
+
+		apb: bus@ffe00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffe00000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+			sd_emmc_b: mmc@5000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x5000 0x0 0x800>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				clocks = <&clkc CLKID_SD_EMMC_B>,
+					<&clkc CLKID_SD_EMMC_B_CLK0>,
+					<&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				resets = <&reset RESET_SD_EMMC_B>;
+			};
+
+			sd_emmc_c: mmc@7000 {
+				compatible = "amlogic,meson-axg-mmc";
+				reg = <0x0 0x7000 0x0 0x800>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				clocks = <&clkc CLKID_SD_EMMC_C>,
+					<&clkc CLKID_SD_EMMC_C_CLK0>,
+					<&clkc CLKID_FCLK_DIV2>;
+				clock-names = "core", "clkin0", "clkin1";
+				resets = <&reset RESET_SD_EMMC_C>;
+			};
+
+			usb2_phy1: phy@9020 {
+				compatible = "amlogic,meson-gxl-usb2-phy";
+				#phy-cells = <0>;
+				reg = <0x0 0x9020 0x0 0x20>;
+				clocks = <&clkc CLKID_USB>;
+				clock-names = "phy";
+				resets = <&reset RESET_USB_OTG>;
+				reset-names = "phy";
+			};
+		};
+
+		sram: sram@fffc0000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0xfffc0000 0x0 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xfffc0000 0x20000>;
+
+			cpu_scp_lpri: scp-sram@13000 {
+				compatible = "amlogic,meson-axg-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-sram@13400 {
+				compatible = "amlogic,meson-axg-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
new file mode 100644
index 000000000..ff68b911b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -0,0 +1,2508 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/clock/g12a-aoclkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &sd_emmc_b; /* SD card */
+		mmc1 = &sd_emmc_c; /* eMMC */
+		mmc2 = &sd_emmc_a; /* SDIO */
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			clocks = <&clkc CLKID_HDMI>,
+				 <&clkc CLKID_HTX_PCLK>,
+				 <&clkc CLKID_VPU_INTR>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				    "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			clocks = <&clkc CLKID_HDMI>,
+				 <&clkc CLKID_HTX_PCLK>,
+				 <&clkc CLKID_VPU_INTR>;
+			status = "disabled";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		clocks = <&clkc CLKID_EFUSE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-124999998 {
+			opp-hz = /bits/ 64 <124999998>;
+			opp-microvolt = <800000>;
+		};
+		opp-249999996 {
+			opp-hz = /bits/ 64 <249999996>;
+			opp-microvolt = <800000>;
+		};
+		opp-285714281 {
+			opp-hz = /bits/ 64 <285714281>;
+			opp-microvolt = <800000>;
+		};
+		opp-399999994 {
+			opp-hz = /bits/ 64 <399999994>;
+			opp-microvolt = <800000>;
+		};
+		opp-499999992 {
+			opp-hz = /bits/ 64 <499999992>;
+			opp-microvolt = <800000>;
+		};
+		opp-666666656 {
+			opp-hz = /bits/ 64 <666666656>;
+			opp-microvolt = <800000>;
+		};
+		opp-799999987 {
+			opp-hz = /bits/ 64 <799999987>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pcie: pcie@fc000000 {
+			compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
+			reg = <0x0 0xfc000000 0x0 0x400000>,
+			      <0x0 0xff648000 0x0 0x2000>,
+			      <0x0 0xfc400000 0x0 0x200000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>,
+				 <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
+
+			clocks = <&clkc CLKID_PCIE_PHY
+				  &clkc CLKID_PCIE_COMB
+				  &clkc CLKID_PCIE_PLL>;
+			clock-names = "general",
+				      "pclk",
+				      "port";
+			resets = <&reset RESET_PCIE_CTRL_A>,
+				 <&reset RESET_PCIE_APB>;
+			reset-names = "port",
+				      "apb";
+			num-lanes = <1>;
+			phys = <&usb3_pcie_phy PHY_TYPE_PCIE>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
+		ethmac: ethernet@ff3f0000 {
+			compatible = "amlogic,meson-g12a-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xff3f0000 0x0 0x10000>,
+			      <0x0 0xff634540 0x0 0x8>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&clkc CLKID_ETH>,
+				 <&clkc CLKID_FCLK_DIV2>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			status = "disabled";
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+		};
+
+		apb: bus@ff600000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff600000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+			hdmi_tx: hdmi-tx@0 {
+				compatible = "amlogic,meson-g12a-dw-hdmi";
+				reg = <0x0 0x0 0x0 0x10000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+				resets = <&reset RESET_HDMITX_CAPB3>,
+					 <&reset RESET_HDMITX_PHY>,
+					 <&reset RESET_HDMITX>;
+				reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+				clocks = <&clkc CLKID_HDMI>,
+					 <&clkc CLKID_HTX_PCLK>,
+					 <&clkc CLKID_VPU_INTR>;
+				clock-names = "isfr", "iahb", "venci";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+
+				/* VPU VENC Input */
+				hdmi_tx_venc_port: port@0 {
+					reg = <0>;
+
+					hdmi_tx_in: endpoint {
+						remote-endpoint = <&hdmi_tx_out>;
+					};
+				};
+
+				/* TMDS Output */
+				hdmi_tx_tmds_port: port@1 {
+					reg = <1>;
+				};
+			};
+
+			apb_efuse: bus@30000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x30000 0x0 0x2000>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>;
+
+				hwrng: rng@218 {
+					compatible = "amlogic,meson-rng";
+					reg = <0x0 0x218 0x0 0x4>;
+					clocks = <&clkc CLKID_RNG0>;
+					clock-names = "core";
+				};
+			};
+
+			acodec: audio-controller@32000 {
+				compatible = "amlogic,t9015";
+				reg = <0x0 0x32000 0x0 0x14>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "ACODEC";
+				clocks = <&clkc CLKID_AUDIO_CODEC>;
+				clock-names = "pclk";
+				resets = <&reset RESET_AUDIO_CODEC>;
+				status = "disabled";
+			};
+
+			periphs: bus@34400 {
+				compatible = "simple-bus";
+				reg = <0x0 0x34400 0x0 0x400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+
+				periphs_pinctrl: pinctrl@40 {
+					compatible = "amlogic,meson-g12a-periphs-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio: bank@40 {
+						reg = <0x0 0x40  0x0 0x4c>,
+						      <0x0 0xe8  0x0 0x18>,
+						      <0x0 0x120 0x0 0x18>,
+						      <0x0 0x2c0 0x0 0x40>,
+						      <0x0 0x340 0x0 0x1c>;
+						reg-names = "gpio",
+							    "pull",
+							    "pull-enable",
+							    "mux",
+							    "ds";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&periphs_pinctrl 0 0 86>;
+					};
+
+					cec_ao_a_h_pins: cec_ao_a_h {
+						mux {
+							groups = "cec_ao_a_h";
+							function = "cec_ao_a_h";
+							bias-disable;
+						};
+					};
+
+					cec_ao_b_h_pins: cec_ao_b_h {
+						mux {
+							groups = "cec_ao_b_h";
+							function = "cec_ao_b_h";
+							bias-disable;
+						};
+					};
+
+					emmc_ctrl_pins: emmc-ctrl {
+						mux-0 {
+							groups = "emmc_cmd";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "emmc_clk";
+							function = "emmc";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_4b_pins: emmc-data-4b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_data_8b_pins: emmc-data-8b {
+						mux-0 {
+							groups = "emmc_nand_d0",
+								 "emmc_nand_d1",
+								 "emmc_nand_d2",
+								 "emmc_nand_d3",
+								 "emmc_nand_d4",
+								 "emmc_nand_d5",
+								 "emmc_nand_d6",
+								 "emmc_nand_d7";
+							function = "emmc";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_ds_pins: emmc-ds {
+						mux {
+							groups = "emmc_nand_ds";
+							function = "emmc";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					emmc_clk_gate_pins: emmc_clk_gate {
+						mux {
+							groups = "BOOT_8";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_ddc_pins: hdmitx_ddc {
+						mux {
+							groups = "hdmitx_sda",
+								 "hdmitx_sck";
+							function = "hdmitx";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					hdmitx_hpd_pins: hdmitx_hpd {
+						mux {
+							groups = "hdmitx_hpd_in";
+							function = "hdmitx";
+							bias-disable;
+						};
+					};
+
+
+					i2c0_sda_c_pins: i2c0-sda-c {
+						mux {
+							groups = "i2c0_sda_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+
+						};
+					};
+
+					i2c0_sck_c_pins: i2c0-sck-c {
+						mux {
+							groups = "i2c0_sck_c";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z0_pins: i2c0-sda-z0 {
+						mux {
+							groups = "i2c0_sda_z0";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sck_z1_pins: i2c0-sck-z1 {
+						mux {
+							groups = "i2c0_sck_z1";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z7_pins: i2c0-sda-z7 {
+						mux {
+							groups = "i2c0_sda_z7";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c0_sda_z8_pins: i2c0-sda-z8 {
+						mux {
+							groups = "i2c0_sda_z8";
+							function = "i2c0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_x_pins: i2c1-sda-x {
+						mux {
+							groups = "i2c1_sda_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_x_pins: i2c1-sck-x {
+						mux {
+							groups = "i2c1_sck_x";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h2_pins: i2c1-sda-h2 {
+						mux {
+							groups = "i2c1_sda_h2";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h3_pins: i2c1-sck-h3 {
+						mux {
+							groups = "i2c1_sck_h3";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sda_h6_pins: i2c1-sda-h6 {
+						mux {
+							groups = "i2c1_sda_h6";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c1_sck_h7_pins: i2c1-sck-h7 {
+						mux {
+							groups = "i2c1_sck_h7";
+							function = "i2c1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_x_pins: i2c2-sda-x {
+						mux {
+							groups = "i2c2_sda_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_x_pins: i2c2-sck-x {
+						mux {
+							groups = "i2c2_sck_x";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sda_z_pins: i2c2-sda-z {
+						mux {
+							groups = "i2c2_sda_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c2_sck_z_pins: i2c2-sck-z {
+						mux {
+							groups = "i2c2_sck_z";
+							function = "i2c2";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_h_pins: i2c3-sda-h {
+						mux {
+							groups = "i2c3_sda_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_h_pins: i2c3-sck-h {
+						mux {
+							groups = "i2c3_sck_h";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sda_a_pins: i2c3-sda-a {
+						mux {
+							groups = "i2c3_sda_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c3_sck_a_pins: i2c3-sck-a {
+						mux {
+							groups = "i2c3_sck_a";
+							function = "i2c3";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_a_pins: mclk0-a {
+						mux {
+							groups = "mclk0_a";
+							function = "mclk0";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_a_pins: mclk1-a {
+						mux {
+							groups = "mclk1_a";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_x_pins: mclk1-x {
+						mux {
+							groups = "mclk1_x";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk1_z_pins: mclk1-z {
+						mux {
+							groups = "mclk1_z";
+							function = "mclk1";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					nor_pins: nor {
+						mux {
+							groups = "nor_d",
+							       "nor_q",
+							       "nor_c",
+							       "nor_cs";
+							function = "nor";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_a_pins: pdm-din0-a {
+						mux {
+							groups = "pdm_din0_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_c_pins: pdm-din0-c {
+						mux {
+							groups = "pdm_din0_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_x_pins: pdm-din0-x {
+						mux {
+							groups = "pdm_din0_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din0_z_pins: pdm-din0-z {
+						mux {
+							groups = "pdm_din0_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_a_pins: pdm-din1-a {
+						mux {
+							groups = "pdm_din1_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_c_pins: pdm-din1-c {
+						mux {
+							groups = "pdm_din1_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_x_pins: pdm-din1-x {
+						mux {
+							groups = "pdm_din1_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din1_z_pins: pdm-din1-z {
+						mux {
+							groups = "pdm_din1_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_a_pins: pdm-din2-a {
+						mux {
+							groups = "pdm_din2_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_c_pins: pdm-din2-c {
+						mux {
+							groups = "pdm_din2_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_x_pins: pdm-din2-x {
+						mux {
+							groups = "pdm_din2_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din2_z_pins: pdm-din2-z {
+						mux {
+							groups = "pdm_din2_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_a_pins: pdm-din3-a {
+						mux {
+							groups = "pdm_din3_a";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_c_pins: pdm-din3-c {
+						mux {
+							groups = "pdm_din3_c";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_x_pins: pdm-din3-x {
+						mux {
+							groups = "pdm_din3_x";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_din3_z_pins: pdm-din3-z {
+						mux {
+							groups = "pdm_din3_z";
+							function = "pdm";
+							bias-disable;
+						};
+					};
+
+					pdm_dclk_a_pins: pdm-dclk-a {
+						mux {
+							groups = "pdm_dclk_a";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_c_pins: pdm-dclk-c {
+						mux {
+							groups = "pdm_dclk_c";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_x_pins: pdm-dclk-x {
+						mux {
+							groups = "pdm_dclk_x";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pdm_dclk_z_pins: pdm-dclk-z {
+						mux {
+							groups = "pdm_dclk_z";
+							function = "pdm";
+							bias-disable;
+							drive-strength-microamp = <500>;
+						};
+					};
+
+					pwm_a_pins: pwm-a {
+						mux {
+							groups = "pwm_a";
+							function = "pwm_a";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x7_pins: pwm-b-x7 {
+						mux {
+							groups = "pwm_b_x7";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_b_x19_pins: pwm-b-x19 {
+						mux {
+							groups = "pwm_b_x19";
+							function = "pwm_b";
+							bias-disable;
+						};
+					};
+
+					pwm_c_c_pins: pwm-c-c {
+						mux {
+							groups = "pwm_c_c";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x5_pins: pwm-c-x5 {
+						mux {
+							groups = "pwm_c_x5";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_c_x8_pins: pwm-c-x8 {
+						mux {
+							groups = "pwm_c_x8";
+							function = "pwm_c";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x3_pins: pwm-d-x3 {
+						mux {
+							groups = "pwm_d_x3";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_d_x6_pins: pwm-d-x6 {
+						mux {
+							groups = "pwm_d_x6";
+							function = "pwm_d";
+							bias-disable;
+						};
+					};
+
+					pwm_e_pins: pwm-e {
+						mux {
+							groups = "pwm_e";
+							function = "pwm_e";
+							bias-disable;
+						};
+					};
+
+					pwm_f_z_pins: pwm-f-z {
+						mux {
+							groups = "pwm_f_z";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_a_pins: pwm-f-a {
+						mux {
+							groups = "pwm_f_a";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_x_pins: pwm-f-x {
+						mux {
+							groups = "pwm_f_x";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_h_pins: pwm-f-h {
+						mux {
+							groups = "pwm_f_h";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					sdcard_c_pins: sdcard_c {
+						mux-0 {
+							groups = "sdcard_d0_c",
+								 "sdcard_d1_c",
+								 "sdcard_d2_c",
+								 "sdcard_d3_c",
+								 "sdcard_cmd_c";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_c";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_c_pins: sdcard_clk_gate_c {
+						mux {
+							groups = "GPIOC_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_z_pins: sdcard_z {
+						mux-0 {
+							groups = "sdcard_d0_z",
+								 "sdcard_d1_z",
+								 "sdcard_d2_z",
+								 "sdcard_d3_z",
+								 "sdcard_cmd_z";
+							function = "sdcard";
+							bias-pull-up;
+							drive-strength-microamp = <4000>;
+						};
+
+						mux-1 {
+							groups = "sdcard_clk_z";
+							function = "sdcard";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdcard_clk_gate_z_pins: sdcard_clk_gate_z {
+						mux {
+							groups = "GPIOZ_6";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_pins: sdio {
+						mux {
+							groups = "sdio_d0",
+								 "sdio_d1",
+								 "sdio_d2",
+								 "sdio_d3",
+								 "sdio_clk",
+								 "sdio_cmd";
+							function = "sdio";
+							bias-disable;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					sdio_clk_gate_pins: sdio_clk_gate {
+						mux {
+							groups = "GPIOX_4";
+							function = "gpio_periphs";
+							bias-pull-down;
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spdif_in_a10_pins: spdif-in-a10 {
+						mux {
+							groups = "spdif_in_a10";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_a12_pins: spdif-in-a12 {
+						mux {
+							groups = "spdif_in_a12";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_in_h_pins: spdif-in-h {
+						mux {
+							groups = "spdif_in_h";
+							function = "spdif_in";
+							bias-disable;
+						};
+					};
+
+					spdif_out_h_pins: spdif-out-h {
+						mux {
+							groups = "spdif_out_h";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a11_pins: spdif-out-a11 {
+						mux {
+							groups = "spdif_out_a11";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spdif_out_a13_pins: spdif-out-a13 {
+						mux {
+							groups = "spdif_out_a13";
+							function = "spdif_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					spicc0_x_pins: spicc0-x {
+						mux {
+							groups = "spi0_mosi_x",
+							       "spi0_miso_x",
+							       "spi0_clk_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_ss0_x_pins: spicc0-ss0-x {
+						mux {
+							groups = "spi0_ss0_x";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc0_c_pins: spicc0-c {
+						mux {
+							groups = "spi0_mosi_c",
+							       "spi0_miso_c",
+							       "spi0_ss0_c",
+							       "spi0_clk_c";
+							function = "spi0";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					spicc1_pins: spicc1 {
+						mux {
+							groups = "spi1_mosi",
+							       "spi1_miso",
+							       "spi1_clk";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+						};
+					};
+
+					spicc1_ss0_pins: spicc1-ss0 {
+						mux {
+							groups = "spi1_ss0";
+							function = "spi1";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_a_din0_pins: tdm-a-din0 {
+						mux {
+							groups = "tdm_a_din0";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_din1_pins: tdm-a-din1 {
+						mux {
+							groups = "tdm_a_din1";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_a_dout0_pins: tdm-a-dout0 {
+						mux {
+							groups = "tdm_a_dout0";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_dout1_pins: tdm-a-dout1 {
+						mux {
+							groups = "tdm_a_dout1";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_fs_pins: tdm-a-fs {
+						mux {
+							groups = "tdm_a_fs";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_sclk_pins: tdm-a-sclk {
+						mux {
+							groups = "tdm_a_sclk";
+							function = "tdm_a";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_a_slv_fs_pins: tdm-a-slv-fs {
+						mux {
+							groups = "tdm_a_slv_fs";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+
+					tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
+						mux {
+							groups = "tdm_a_slv_sclk";
+							function = "tdm_a";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din0_pins: tdm-b-din0 {
+						mux {
+							groups = "tdm_b_din0";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din1_pins: tdm-b-din1 {
+						mux {
+							groups = "tdm_b_din1";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din2_pins: tdm-b-din2 {
+						mux {
+							groups = "tdm_b_din2";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_a_pins: tdm-b-din3-a {
+						mux {
+							groups = "tdm_b_din3_a";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_din3_h_pins: tdm-b-din3-h {
+						mux {
+							groups = "tdm_b_din3_h";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_dout0_pins: tdm-b-dout0 {
+						mux {
+							groups = "tdm_b_dout0";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout1_pins: tdm-b-dout1 {
+						mux {
+							groups = "tdm_b_dout1";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout2_pins: tdm-b-dout2 {
+						mux {
+							groups = "tdm_b_dout2";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_a_pins: tdm-b-dout3-a {
+						mux {
+							groups = "tdm_b_dout3_a";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_dout3_h_pins: tdm-b-dout3-h {
+						mux {
+							groups = "tdm_b_dout3_h";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_fs_pins: tdm-b-fs {
+						mux {
+							groups = "tdm_b_fs";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_sclk_pins: tdm-b-sclk {
+						mux {
+							groups = "tdm_b_sclk";
+							function = "tdm_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_b_slv_fs_pins: tdm-b-slv-fs {
+						mux {
+							groups = "tdm_b_slv_fs";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
+						mux {
+							groups = "tdm_b_slv_sclk";
+							function = "tdm_b";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_a_pins: tdm-c-din0-a {
+						mux {
+							groups = "tdm_c_din0_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din0_z_pins: tdm-c-din0-z {
+						mux {
+							groups = "tdm_c_din0_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_a_pins: tdm-c-din1-a {
+						mux {
+							groups = "tdm_c_din1_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din1_z_pins: tdm-c-din1-z {
+						mux {
+							groups = "tdm_c_din1_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_a_pins: tdm-c-din2-a {
+						mux {
+							groups = "tdm_c_din2_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					eth_leds_pins: eth-leds {
+						mux {
+							groups = "eth_link_led",
+								 "eth_act_led";
+							function = "eth";
+							bias-disable;
+						};
+					};
+
+					eth_pins: eth {
+						mux {
+							groups = "eth_mdio",
+								 "eth_mdc",
+								 "eth_rgmii_rx_clk",
+								 "eth_rx_dv",
+								 "eth_rxd0",
+								 "eth_rxd1",
+								 "eth_txen",
+								 "eth_txd0",
+								 "eth_txd1";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					eth_rgmii_pins: eth-rgmii {
+						mux {
+							groups = "eth_rxd2_rgmii",
+								 "eth_rxd3_rgmii",
+								 "eth_rgmii_tx_clk",
+								 "eth_txd2_rgmii",
+								 "eth_txd3_rgmii";
+							function = "eth";
+							drive-strength-microamp = <4000>;
+							bias-disable;
+						};
+					};
+
+					tdm_c_din2_z_pins: tdm-c-din2-z {
+						mux {
+							groups = "tdm_c_din2_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_a_pins: tdm-c-din3-a {
+						mux {
+							groups = "tdm_c_din3_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_din3_z_pins: tdm-c-din3-z {
+						mux {
+							groups = "tdm_c_din3_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_dout0_a_pins: tdm-c-dout0-a {
+						mux {
+							groups = "tdm_c_dout0_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout0_z_pins: tdm-c-dout0-z {
+						mux {
+							groups = "tdm_c_dout0_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_a_pins: tdm-c-dout1-a {
+						mux {
+							groups = "tdm_c_dout1_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout1_z_pins: tdm-c-dout1-z {
+						mux {
+							groups = "tdm_c_dout1_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_a_pins: tdm-c-dout2-a {
+						mux {
+							groups = "tdm_c_dout2_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout2_z_pins: tdm-c-dout2-z {
+						mux {
+							groups = "tdm_c_dout2_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_a_pins: tdm-c-dout3-a {
+						mux {
+							groups = "tdm_c_dout3_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_dout3_z_pins: tdm-c-dout3-z {
+						mux {
+							groups = "tdm_c_dout3_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_a_pins: tdm-c-fs-a {
+						mux {
+							groups = "tdm_c_fs_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_fs_z_pins: tdm-c-fs-z {
+						mux {
+							groups = "tdm_c_fs_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_a_pins: tdm-c-sclk-a {
+						mux {
+							groups = "tdm_c_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_sclk_z_pins: tdm-c-sclk-z {
+						mux {
+							groups = "tdm_c_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
+						mux {
+							groups = "tdm_c_slv_fs_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
+						mux {
+							groups = "tdm_c_slv_fs_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
+						mux {
+							groups = "tdm_c_slv_sclk_a";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
+						mux {
+							groups = "tdm_c_slv_sclk_z";
+							function = "tdm_c";
+							bias-disable;
+						};
+					};
+
+					uart_a_pins: uart-a {
+						mux {
+							groups = "uart_a_tx",
+								 "uart_a_rx";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_a_cts_rts_pins: uart-a-cts-rts {
+						mux {
+							groups = "uart_a_cts",
+								 "uart_a_rts";
+							function = "uart_a";
+							bias-disable;
+						};
+					};
+
+					uart_b_pins: uart-b {
+						mux {
+							groups = "uart_b_tx",
+								 "uart_b_rx";
+							function = "uart_b";
+							bias-disable;
+						};
+					};
+
+					uart_c_pins: uart-c {
+						mux {
+							groups = "uart_c_tx",
+								 "uart_c_rx";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+
+					uart_c_cts_rts_pins: uart-c-cts-rts {
+						mux {
+							groups = "uart_c_cts",
+								 "uart_c_rts";
+							function = "uart_c";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			cpu_temp: temperature-sensor@34800 {
+				compatible = "amlogic,g12a-cpu-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34800 0x0 0x50>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			ddr_temp: temperature-sensor@34c00 {
+				compatible = "amlogic,g12a-ddr-thermal",
+					     "amlogic,g12a-thermal";
+				reg = <0x0 0x34c00 0x0 0x50>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			usb2_phy0: phy@36000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x36000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY20>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			dmc: bus@38000 {
+				compatible = "simple-bus";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x38000 0x0 0x2000>;
+
+				canvas: video-lut@48 {
+					compatible = "amlogic,canvas";
+					reg = <0x0 0x48 0x0 0x14>;
+				};
+
+				pmu: pmu@80 {
+					reg = <0x0 0x80 0x0 0x40>,
+					      <0x0 0xc00 0x0 0x40>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+				};
+			};
+
+			usb2_phy1: phy@3a000 {
+				compatible = "amlogic,g12a-usb2-phy";
+				reg = <0x0 0x3a000 0x0 0x2000>;
+				clocks = <&xtal>;
+				clock-names = "xtal";
+				resets = <&reset RESET_USB_PHY21>;
+				reset-names = "phy";
+				#phy-cells = <0>;
+			};
+
+			hiu: bus@3c000 {
+				compatible = "simple-bus";
+				reg = <0x0 0x3c000 0x0 0x1400>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+				hhi: system-controller@0 {
+					compatible = "amlogic,meson-gx-hhi-sysctrl",
+						     "simple-mfd", "syscon";
+					reg = <0 0 0 0x400>;
+
+					clkc: clock-controller {
+						compatible = "amlogic,g12a-clkc";
+						#clock-cells = <1>;
+						clocks = <&xtal>;
+						clock-names = "xtal";
+					};
+
+					pwrc: power-controller {
+						compatible = "amlogic,meson-g12a-pwrc";
+						#power-domain-cells = <1>;
+						amlogic,ao-sysctrl = <&rti>;
+						resets = <&reset RESET_VIU>,
+							 <&reset RESET_VENC>,
+							 <&reset RESET_VCBUS>,
+							 <&reset RESET_BT656>,
+							 <&reset RESET_RDMA>,
+							 <&reset RESET_VENCI>,
+							 <&reset RESET_VENCP>,
+							 <&reset RESET_VDAC>,
+							 <&reset RESET_VDI6>,
+							 <&reset RESET_VENCL>,
+							 <&reset RESET_VID_LOCK>;
+						reset-names = "viu", "venc", "vcbus", "bt656",
+							      "rdma", "venci", "vencp", "vdac",
+							      "vdi6", "vencl", "vid_lock";
+						clocks = <&clkc CLKID_VPU>,
+							 <&clkc CLKID_VAPB>;
+						clock-names = "vpu", "vapb";
+						/*
+						 * VPU clocking is provided by two identical clock paths
+						 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+						 * free mux to safely change frequency while running.
+						 * Same for VAPB but with a final gate after the glitch free mux.
+						 */
+						assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+								  <&clkc CLKID_VPU_0>,
+								  <&clkc CLKID_VPU>, /* Glitch free mux */
+								  <&clkc CLKID_VAPB_0_SEL>,
+								  <&clkc CLKID_VAPB_0>,
+								  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+						assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VPU_0>,
+									 <&clkc CLKID_FCLK_DIV4>,
+									 <0>, /* Do Nothing */
+									 <&clkc CLKID_VAPB_0>;
+						assigned-clock-rates = <0>, /* Do Nothing */
+								       <666666666>,
+								       <0>, /* Do Nothing */
+								       <0>, /* Do Nothing */
+								       <250000000>,
+								       <0>; /* Do Nothing */
+					};
+				};
+			};
+
+			usb3_pcie_phy: phy@46000 {
+				compatible = "amlogic,g12a-usb3-pcie-phy";
+				reg = <0x0 0x46000 0x0 0x2000>;
+				clocks = <&clkc CLKID_PCIE_PLL>;
+				clock-names = "ref_clk";
+				resets = <&reset RESET_PCIE_PHY>;
+				reset-names = "phy";
+				assigned-clocks = <&clkc CLKID_PCIE_PLL>;
+				assigned-clock-rates = <100000000>;
+				#phy-cells = <1>;
+			};
+
+			eth_phy: mdio-multiplexer@4c000 {
+				compatible = "amlogic,g12a-mdio-mux";
+				reg = <0x0 0x4c000 0x0 0xa4>;
+				clocks = <&clkc CLKID_ETH_PHY>,
+					 <&xtal>,
+					 <&clkc CLKID_MPLL_50M>;
+				clock-names = "pclk", "clkin0", "clkin1";
+				mdio-parent-bus = <&mdio0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ext_mdio: mdio@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				int_mdio: mdio@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					internal_ephy: ethernet-phy@8 {
+						compatible = "ethernet-phy-id0180.3301",
+							     "ethernet-phy-ieee802.3-c22";
+						interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+						reg = <8>;
+						max-speed = <100>;
+					};
+				};
+			};
+		};
+
+		aobus: bus@ff800000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff800000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+			rti: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl",
+					     "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x0 0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-g12a-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+					clocks = <&xtal>, <&clkc CLKID_CLK81>;
+					clock-names = "xtal", "mpeg-clk";
+				};
+
+				ao_pinctrl: pinctrl {
+					compatible = "amlogic,meson-g12a-aobus-pinctrl";
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					gpio_ao: bank@14 {
+						reg = <0x0 0x14 0x0 0x8>,
+						      <0x0 0x1c 0x0 0x8>,
+						      <0x0 0x24 0x0 0x14>;
+						reg-names = "mux",
+							    "ds",
+							    "gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio-ranges = <&ao_pinctrl 0 0 15>;
+					};
+
+					i2c_ao_sck_pins: i2c_ao_sck_pins {
+						mux {
+							groups = "i2c_ao_sck";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_pins: i2c_ao_sda {
+						mux {
+							groups = "i2c_ao_sda";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sck_e_pins: i2c_ao_sck_e {
+						mux {
+							groups = "i2c_ao_sck_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					i2c_ao_sda_e_pins: i2c_ao_sda_e {
+						mux {
+							groups = "i2c_ao_sda_e";
+							function = "i2c_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					mclk0_ao_pins: mclk0-ao {
+						mux {
+							groups = "mclk0_ao";
+							function = "mclk0_ao";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+						mux {
+							groups = "tdm_ao_b_din0";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					spdif_ao_out_pins: spdif-ao-out {
+						mux {
+							groups = "spdif_ao_out";
+							function = "spdif_ao_out";
+							drive-strength-microamp = <500>;
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+						mux {
+							groups = "tdm_ao_b_din1";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+						mux {
+							groups = "tdm_ao_b_din2";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+						mux {
+							groups = "tdm_ao_b_dout0";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+						mux {
+							groups = "tdm_ao_b_dout1";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+						mux {
+							groups = "tdm_ao_b_dout2";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_fs_pins: tdm-ao-b-fs {
+						mux {
+							groups = "tdm_ao_b_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+						mux {
+							groups = "tdm_ao_b_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+							drive-strength-microamp = <3000>;
+						};
+					};
+
+					tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+						mux {
+							groups = "tdm_ao_b_slv_fs";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+						mux {
+							groups = "tdm_ao_b_slv_sclk";
+							function = "tdm_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_pins: uart-a-ao {
+						mux {
+							groups = "uart_ao_a_tx",
+								 "uart_ao_a_rx";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts {
+						mux {
+							groups = "uart_ao_a_cts",
+								 "uart_ao_a_rts";
+							function = "uart_ao_a";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+						mux {
+							groups = "uart_ao_b_tx_2",
+								 "uart_ao_b_rx_3";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+						mux {
+							groups = "uart_ao_b_tx_8",
+								 "uart_ao_b_rx_9";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+						mux {
+							groups = "uart_ao_b_cts",
+								 "uart_ao_b_rts";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					pwm_a_e_pins: pwm-a-e {
+						mux {
+							groups = "pwm_a_e";
+							function = "pwm_a_e";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_a_pins: pwm-ao-a {
+						mux {
+							groups = "pwm_ao_a";
+							function = "pwm_ao_a";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_b_pins: pwm-ao-b {
+						mux {
+							groups = "pwm_ao_b";
+							function = "pwm_ao_b";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_4_pins: pwm-ao-c-4 {
+						mux {
+							groups = "pwm_ao_c_4";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_c_6_pins: pwm-ao-c-6 {
+						mux {
+							groups = "pwm_ao_c_6";
+							function = "pwm_ao_c";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_5_pins: pwm-ao-d-5 {
+						mux {
+							groups = "pwm_ao_d_5";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_10_pins: pwm-ao-d-10 {
+						mux {
+							groups = "pwm_ao_d_10";
+							function = "pwm_ao_d";
+							bias-disable;
+						};
+					};
+
+					pwm_ao_d_e_pins: pwm-ao-d-e {
+						mux {
+							groups = "pwm_ao_d_e";
+							function = "pwm_ao_d";
+						};
+					};
+
+					remote_input_ao_pins: remote-input-ao {
+						mux {
+							groups = "remote_ao_input";
+							function = "remote_ao_input";
+							bias-disable;
+						};
+					};
+				};
+			};
+
+			vrtc: rtc@a8 {
+				compatible = "amlogic,meson-vrtc";
+				reg = <0x0 0x000a8 0x0 0x4>;
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CEC>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			cecb_AO: cec@280 {
+				compatible = "amlogic,meson-g12a-ao-cec";
+				reg = <0x0 0x00280 0x0 0x1c>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>;
+				clock-names = "oscin";
+				status = "disabled";
+			};
+
+			pwm_AO_cd: pwm@2000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-cd";
+				reg = <0x0 0x2000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_AO: serial@3000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x3000 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x4000 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@5000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x05000 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			pwm_AO_ab: pwm@7000 {
+				compatible = "amlogic,meson-g12a-ao-pwm-ab";
+				reg = <0x0 0x7000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@8000 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x8000 0x0 0x20>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-g12a-saradc",
+					     "amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x48>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					 <&clkc_AO CLKID_AO_SAR_ADC>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					 <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
+		};
+
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
+		vpu: vpu@ff900000 {
+			compatible = "amlogic,meson-g12a-vpu";
+			reg = <0x0 0xff900000 0x0 0x100000>,
+			      <0x0 0xff63c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		gic: interrupt-controller@ffc01000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xffc01000 0 0x1000>,
+			      <0x0 0xffc02000 0 0x2000>,
+			      <0x0 0xffc04000 0 0x2000>,
+			      <0x0 0xffc06000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		cbus: bus@ffd00000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xffd00000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
+
+			reset: reset-controller@1004 {
+				compatible = "amlogic,meson-axg-reset";
+				reg = <0x0 0x1004 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			gpio_intc: interrupt-controller@f080 {
+				compatible = "amlogic,meson-g12a-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0xf080 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+			};
+
+			watchdog: watchdog@f0d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0xf0d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+
+			spicc0: spi@13000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x13000 0x0 0x44>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC0>,
+					 <&clkc CLKID_SPICC0_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc1: spi@15000 {
+				compatible = "amlogic,meson-g12a-spicc";
+				reg = <0x0 0x15000 0x0 0x44>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_SPICC1>,
+					 <&clkc CLKID_SPICC1_SCLK>;
+				clock-names = "core", "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@14000 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				status = "disabled";
+				reg = <0x0 0x14000 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_CLK81>;
+			};
+
+			pwm_ef: pwm@19000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x19000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@1a000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1a000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@1b000 {
+				compatible = "amlogic,meson-g12a-ee-pwm";
+				reg = <0x0 0x1b000 0x0 0x20>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@1c000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1c000 0x0 0x20>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c2: i2c@1d000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1d000 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c1: i2c@1e000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			i2c0: i2c@1f000 {
+				compatible = "amlogic,meson-axg-i2c";
+				status = "disabled";
+				reg = <0x0 0x1f000 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc CLKID_I2C>;
+			};
+
+			clk_msr: clock-measure@18000 {
+				compatible = "amlogic,meson-g12a-clk-measure";
+				reg = <0x0 0x18000 0x0 0x10>;
+			};
+
+			uart_C: serial@22000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
+				reg = <0x0 0x22000 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_B: serial@23000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
+				reg = <0x0 0x23000 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_A: serial@24000 {
+				compatible = "amlogic,meson-g12a-uart",
+					     "amlogic,meson-gx-uart";
+				reg = <0x0 0x24000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+				fifo-size = <128>;
+			};
+		};
+
+		sd_emmc_a: mmc@ffe03000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe03000 0x0 0x800>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_A>,
+				 <&clkc CLKID_SD_EMMC_A_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_A>;
+		};
+
+		sd_emmc_b: mmc@ffe05000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe05000 0x0 0x800>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_B>,
+				 <&clkc CLKID_SD_EMMC_B_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_B>;
+		};
+
+		sd_emmc_c: mmc@ffe07000 {
+			compatible = "amlogic,meson-axg-mmc";
+			reg = <0x0 0xffe07000 0x0 0x800>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clocks = <&clkc CLKID_SD_EMMC_C>,
+				 <&clkc CLKID_SD_EMMC_C_CLK0>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "core", "clkin0", "clkin1";
+			resets = <&reset RESET_SD_EMMC_C>;
+		};
+
+		usb: usb@ffe09000 {
+			status = "disabled";
+			compatible = "amlogic,meson-g12a-usb-ctrl";
+			reg = <0x0 0xffe09000 0x0 0xa0>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>;
+			resets = <&reset RESET_USB>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>,
+			       <&usb3_pcie_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+			dwc2: usb@ff400000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xff400000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@ff500000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff500000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,parkmode-disable-ss-quirk;
+			};
+		};
+
+		mali: gpu@ffe40000 {
+			compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+			reg = <0x0 0xffe40000 0x0 0x40000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&clkc CLKID_MALI>;
+			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_passive: ddr-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_passive>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	npu: npu@ff100000 {
+		compatible = "vivante,gc";
+		reg = <0x0 0xff100000 0x0 0x20000>;
+		interrupts = <0 147 4>;
+		clocks = <&clkc CLKID_NNA_CORE_CLK>,
+			 <&clkc CLKID_NNA_AXI_CLK>;
+		clock-names = "core", "bus";
+		resets = <&reset RESET_NNA>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
new file mode 100644
index 000000000..6a1f4dcf6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include "meson-g12-common.dtsi"
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/power/meson-g12a-power.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+/ {
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+};
+
+&apb {
+	pdm: audio-controller@40000 {
+		compatible = "amlogic,g12a-pdm",
+			     "amlogic,axg-pdm";
+		reg = <0x0 0x40000 0x0 0x34>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "PDM";
+		clocks = <&clkc_audio AUD_CLKID_PDM>,
+			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
+		status = "disabled";
+	};
+
+	audio: bus@42000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x42000 0x0 0x2000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
+
+		clkc_audio: clock-controller@0 {
+			status = "disabled";
+			compatible = "amlogic,g12a-audio-clkc";
+			reg = <0x0 0x0 0x0 0xb4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&clkc CLKID_AUDIO>,
+				 <&clkc CLKID_MPLL0>,
+				 <&clkc CLKID_MPLL1>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_MPLL3>,
+				 <&clkc CLKID_HIFI_PLL>,
+				 <&clkc CLKID_FCLK_DIV3>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <&clkc CLKID_GP0_PLL>;
+			clock-names = "pclk",
+				      "mst_in0",
+				      "mst_in1",
+				      "mst_in2",
+				      "mst_in3",
+				      "mst_in4",
+				      "mst_in5",
+				      "mst_in6",
+				      "mst_in7";
+
+			resets = <&reset RESET_AUDIO>;
+		};
+
+		toddr_a: audio-controller@100 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x100 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_A";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+			resets = <&arb AXG_ARB_TODDR_A>,
+				 <&clkc_audio AUD_RESET_TODDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		toddr_b: audio-controller@140 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x140 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_B";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+			resets = <&arb AXG_ARB_TODDR_B>,
+				 <&clkc_audio AUD_RESET_TODDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		toddr_c: audio-controller@180 {
+			compatible = "amlogic,g12a-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x180 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_C";
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+			resets = <&arb AXG_ARB_TODDR_C>,
+				 <&clkc_audio AUD_RESET_TODDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_a: audio-controller@1c0 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x1c0 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_A";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+			resets = <&arb AXG_ARB_FRDDR_A>,
+				 <&clkc_audio AUD_RESET_FRDDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		frddr_b: audio-controller@200 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x200 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_B";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+			resets = <&arb AXG_ARB_FRDDR_B>,
+				 <&clkc_audio AUD_RESET_FRDDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_c: audio-controller@240 {
+			compatible = "amlogic,g12a-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x240 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_C";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+			resets = <&arb AXG_ARB_FRDDR_C>,
+				 <&clkc_audio AUD_RESET_FRDDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		arb: reset-controller@280 {
+			status = "disabled";
+			compatible = "amlogic,meson-axg-audio-arb";
+			reg = <0x0 0x280 0x0 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+		};
+
+		tdmin_a: audio-controller@300 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x300 0x0 0x40>;
+			sound-name-prefix = "TDMIN_A";
+			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_b: audio-controller@340 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x340 0x0 0x40>;
+			sound-name-prefix = "TDMIN_B";
+			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_c: audio-controller@380 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x380 0x0 0x40>;
+			sound-name-prefix = "TDMIN_C";
+			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_lb: audio-controller@3c0 {
+			compatible = "amlogic,g12a-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x3c0 0x0 0x40>;
+			sound-name-prefix = "TDMIN_LB";
+			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifin: audio-controller@400 {
+			compatible = "amlogic,g12a-spdifin",
+				     "amlogic,axg-spdifin";
+			reg = <0x0 0x400 0x0 0x30>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFIN";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+				 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+			clock-names = "pclk", "refclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFIN>;
+			status = "disabled";
+		};
+
+		spdifout: audio-controller@480 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x480 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+				 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
+			status = "disabled";
+		};
+
+		tdmout_a: audio-controller@500 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x500 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_A";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_b: audio-controller@540 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x540 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_B";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_c: audio-controller@580 {
+			compatible = "amlogic,g12a-tdmout";
+			reg = <0x0 0x580 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_C";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifout_b: audio-controller@680 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x680 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT_B";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+				 <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
+			status = "disabled";
+		};
+
+		toacodec: audio-controller@740 {
+			compatible = "amlogic,g12a-toacodec";
+			reg = <0x0 0x740 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOACODEC";
+			resets = <&clkc_audio AUD_RESET_TOACODEC>;
+			status = "disabled";
+		};
+
+		tohdmitx: audio-controller@744 {
+			compatible = "amlogic,g12a-tohdmitx";
+			reg = <0x0 0x744 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOHDMITX";
+			resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+			status = "disabled";
+		};
+	};
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_G12A_ETH_ID>;
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
+&sd_emmc_a {
+	amlogic,dram-access-quirk;
+};
+
+&simplefb_cvbs {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
+&simplefb_hdmi {
+	power-domains = <&pwrc PWRC_G12A_VPU_ID>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
new file mode 100644
index 000000000..fcd7e1d8e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "radxa,zero", "amlogic,g12a";
+	model = "Radxa Zero";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	cvbs-connector {
+		status = "disabled";
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	hdmi_pw: regulator-hdmi_pw {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_PW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		vin-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "RADXA-ZERO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_pw>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "disabled";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
new file mode 100644
index 000000000..0ad0c2b7d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei510", "amlogic,g12a";
+	model = "SEI Robotics SEI510";
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-onoff {
+			label = "On/Off";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regultor-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SEI510";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
new file mode 100644
index 000000000..4b5d11e56
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	compatible = "amlogic,u200", "amlogic,g12a";
+	model = "Amlogic Meson G12A U200 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Touch */
+&i2c0 {
+	status = "okay";
+	pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c CM */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
+	pinctrl-names = "default";
+};
+
+/* i2c Audio */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
new file mode 100644
index 000000000..7ca904f5a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-max", "amlogic,g12a";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Max";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-MAX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-x96max";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+		eee-broken-1000t;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
new file mode 100644
index 000000000..543e70669
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include "meson-g12.dtsi"
+
+/ {
+	compatible = "amlogic,g12a";
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pmu {
+	compatible = "amlogic,g12a-ddr-pmu";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
new file mode 100644
index 000000000..ac6f7ae1d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi M2S";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+};
+
+/* Camera (CSI) bus */
+&i2c1 {
+	status = "okay";
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Display (DSI) bus */
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&npu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
new file mode 100644
index 000000000..124a80901
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
new file mode 100644
index 000000000..8e9ad1e51
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <811000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <901000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <951000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <751000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <781000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <831000>;
+		};
+
+                opp-1908000000 {
+                        opp-hz = /bits/ 64 <1908000000>;
+                        opp-microvolt = <861000>;
+                };
+
+                opp-2016000000 {
+                        opp-hz = /bits/ 64 <2016000000>;
+                        opp-microvolt = <911000>;
+                };
+
+                opp-2108000000 {
+                        opp-hz = /bits/ 64 <2108000000>;
+                        opp-microvolt = <951000>;
+                };
+
+                opp-2208000000 {
+                        opp-hz = /bits/ 64 <2208000000>;
+                        opp-microvolt = <1011000>;
+                };
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
new file mode 100644
index 000000000..13d478f9c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-bananapi-cm4.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
+	model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module";
+
+	aliases {
+		ethernet0 = &ethmac;
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-CM4IO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&cecb_AO {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* CSI port */
+&i2c1 {
+	status = "okay";
+};
+
+/* DSI port for touchscreen */
+&i2c3 {
+	status = "okay";
+};
+
+/* miniPCIe port with USB + SIM slot */
+&pcie {
+	status = "okay";
+};
+
+&sd_emmc_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+/* Peripheral Only USB-C port */
+&usb {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
new file mode 100644
index 000000000..995ce10d5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpios = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1040000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* Ethernet to be enabled in baseboard DT */
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+/* HDMI to be enabled in baseboard DT */
+&hdmi_tx {
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+/* "Camera" I2C bus */
+&i2c1 {
+	pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>;
+	pinctrl-names = "default";
+};
+
+/* Main I2C bus */
+&i2c2 {
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+/* "ID" I2C bus */
+&i2c3 {
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+/* on-module SDIO WiFi */
+&sd_emmc_a {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+
+	status = "okay";
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card to be enabled in baseboard DT */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* on-module eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+/* on-module UART BT */
+&uart_A {
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
new file mode 100644
index 000000000..0a6a12808
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 4 GiB */
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "RST";
+			linux,code = <KEY_POWER>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 120 170 220>;
+		pwms = <&pwm_cd 1 40000 0>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&dc_in>;
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		compatible = "pwm-regulator";
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+		pwm-supply = <&vsys_3v3>;
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2S";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* Main i2c bus */
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	status = "okay";
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_d_x6_pins>;
+	pinctrl-names = "default";
+	pwm-gpios = <&gpio GPIOAO_10 GPIO_ACTIVE_HIGH>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	sd-uhs-sdr104;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	rtl8822cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	/* enable if WiFi/BT board connected */
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios  = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
new file mode 100644
index 000000000..bb73e10b5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b";
+	model = "Beelink GS-King X";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "GSKING-X";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 1",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
new file mode 100644
index 000000000..6eeedd54a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
+	model = "Beelink GT-King Pro";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			label = "power:white";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "GTKING-PRO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
new file mode 100644
index 000000000..3e826095e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b";
+	model = "Beelink GT-King";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "GTKING";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
new file mode 100644
index 000000000..16dd40905
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/ {
+	model = "Khadas VIM3";
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
new file mode 100644
index 000000000..eed2a2304
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -0,0 +1,722 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-GO-Ultra";
+
+	aliases {
+		serial0 = &uart_AO;
+		rtc0 = &vrtc;
+	};
+
+	adc-joystick-left {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 2>, <&saradc 3>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_Y>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_X>;
+			abs-range = <700 2900>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	adc-joystick-right {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 0>, <&saradc 1>;
+		poll-interval = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			linux,code = <ABS_RY>;
+			abs-range = <3150 950>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+		axis@1 {
+			reg = <1>;
+			linux,code = <ABS_RX>;
+			abs-range = <800 3000>;
+			abs-fuzz = <32>;
+			abs-flat = <64>;
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	codec_clk: codec-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+		clock-output-names = "codec_clk";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <10>;
+		pinctrl-0 = <&keypad_gpio_pins>;
+		pinctrl-names = "default";
+
+		volume-up-button {
+			label = "VOLUME-UP";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
+		};
+		volume-down-button {
+			label = "VOLUME-DOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
+		};
+		dpad-up-button {
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+			gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
+		};
+		dpad-down-button {
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+			gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
+		};
+		dpad-left-button {
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+			gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
+		};
+		dpad-right-button {
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
+		};
+		a-button {
+			label = "A";
+			linux,code = <BTN_EAST>;
+			gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
+		};
+		b-button {
+			label = "B";
+			linux,code = <BTN_SOUTH>;
+			gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
+		};
+		y-button {
+			label = "Y";
+			linux,code = <BTN_WEST>;
+			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		};
+		x-button {
+			label = "X";
+			linux,code = <BTN_NORTH>;
+			gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+		};
+		f1-button {
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+			gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
+		};
+		f2-button {
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+			gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
+		};
+		f3-button {
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+			gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
+		};
+		f4-button {
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+			gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
+		};
+		f5-button {
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+			gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
+		};
+		f6-button {
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+			gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
+		};
+		top-left-button {
+			label = "TOP Left";
+			linux,code = <BTN_TL>;
+			gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
+		};
+		top-left2-button {
+			label = "TOP Left 2";
+			linux,code = <BTN_TL2>;
+			gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
+		};
+		top-right-button {
+			label = "TOP Right";
+			linux,code = <BTN_TR>;
+			gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
+		};
+		top-right2-button {
+			label = "TOP Right 2";
+			linux,code = <BTN_TR2>;
+			gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_sys: regulator-vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "Odroid GO Ultra";
+		audio-widgets = "Microphone", "Mic Jack",
+				"Headphone", "Headphones",
+				"Speaker", "Internal Speakers";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"MICL", "Mic Jack",
+				"Headphones", "HPOL",
+				"Headphones", "HPOR",
+				"Speaker Amplifier INL", "HPOL",
+				"Speaker Amplifier INR", "HPOR",
+				"Internal Speakers", "Speaker Amplifier OUTL",
+				"Internal Speakers", "Speaker Amplifier OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rk817>;
+			};
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&hp_5v>;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+/* RK817 only supports 12.5mV steps, round up the values */
+&cpu_opp_table_0 {
+	opp-1000000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <737500>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <762500>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <837500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1896000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1992000000 {
+		opp-microvolt = <1012500>;
+	};
+};
+
+/* RK818 only supports 12.5mV steps, round up the values */
+&cpub_opp_table_1 {
+	opp-1000000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <775000>;
+	};
+	opp-1398000000 {
+		opp-microvolt = <800000>;
+	};
+	opp-1512000000 {
+		opp-microvolt = <825000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <862500>;
+	};
+	opp-1704000000 {
+		opp-microvolt = <900000>;
+	};
+	opp-1800000000 {
+		opp-microvolt = <987500>;
+	};
+	opp-1908000000 {
+		opp-microvolt = <1025000>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vcc_2v3>;
+		vcc8-supply = <&vcc_2v3>;
+		vcc9-supply = <&vddao_3v3>;
+		boost-supply = <&vdd_sys>;
+
+		regulators {
+			vddcpu_a: DCDC_REG1 {
+				regulator-name = "vddcpu_a";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <775000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <775000>;
+				};
+			};
+
+			vdd_ee: DCDC_REG2 {
+				regulator-name = "vdd_ee";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <875000>;
+				};
+			};
+
+			vddq_1v1: DCDC_REG3 {
+				regulator-name = "vddq_1v1";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vddao_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddao_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			hp_5v: DCDC_BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "hp_5v";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddio_ao1v8: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddio_ao1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddq_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vddq_1v8";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vddio_c: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vddio_c";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: SWITCH_REG {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_intc>;
+
+		interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
+
+		vcc1-supply = <&vdd_sys>;
+		vcc2-supply = <&vdd_sys>;
+		vcc3-supply = <&vdd_sys>;
+		vcc4-supply = <&vdd_sys>;
+		vcc5-supply = <&vdd_sys>;
+		vcc6-supply = <&vdd_sys>;
+		vcc7-supply = <&vdd_sys>;
+		vcc8-supply = <&vdd_sys>;
+		vcc9-supply = <&rk817_boost>;
+
+		#sound-dai-cells = <0>;
+		clocks = <&codec_clk>;
+		clock-names = "mclk";
+
+		#clock-cells = <1>;
+
+		regulators {
+			vddcpu_b: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <737500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vddcpu_b";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_2v3: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_2v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vdd_codec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			rk817_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "rk817_boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			usb_host: OTG_SWITCH {
+				regulator-name = "usb_host";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&periphs_pinctrl {
+	keypad_gpio_pins: keypad-gpio-state {
+		mux {
+			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
+			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
+				 "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
+				 "GPIOX_12", "GPIOX_13", "GPIOX_14",  "GPIOX_15",
+				 "GPIOX_16", "GPIOX_17", "GPIOX_18",  "GPIOX_19";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_c>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+
+&tdmif_b {
+	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb2_phy0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+	phy-supply = <&usb_host>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
new file mode 100644
index 000000000..ce1198ad3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2-plus", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2Plus";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_ab 0 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
new file mode 100644
index 000000000..a198a9125
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-odroid-n2.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
new file mode 100644
index 000000000..91c9769fd
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b-odroid.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+	};
+
+	dio2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "U19";
+		status = "okay";
+	};
+
+	hub_5v: regulator-hub_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HUB_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the Hub CHIPENABLE, LOW sets low power state */
+		gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "ODROID-N2";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+				 <&dio2133>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"U19 INL", "ACODEC LOLP",
+				"U19 INR", "ACODEC LORP",
+				"Lineout", "U19 OUTL",
+				"Lineout", "U19 OUTR";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "", "", "", "",
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "", "",
+		/* GPIOA */
+		"PIN_44", /* GPIOA_0 */
+		"PIN_46", /* GPIOA_1 */
+		"PIN_45", /* GPIOA_2 */
+		"PIN_47", /* GPIOA_3 */
+		"PIN_26", /* GPIOA_4 */
+		"", "", "", "", "", "",
+		"PIN_42", /* GPIOA_11 */
+		"PIN_32", /* GPIOA_12 */
+		"PIN_7",  /* GPIOA_13 */
+		"PIN_27", /* GPIOA_14 */
+		"PIN_28", /* GPIOA_15 */
+		/* GPIOX */
+		"PIN_16", /* GPIOX_0 */
+		"PIN_18", /* GPIOX_1 */
+		"PIN_22", /* GPIOX_2 */
+		"PIN_11", /* GPIOX_3 */
+		"PIN_13", /* GPIOX_4 */
+		"PIN_33", /* GPIOX_5 */
+		"PIN_35", /* GPIOX_6 */
+		"PIN_15", /* GPIOX_7 */
+		"PIN_19", /* GPIOX_8 */
+		"PIN_21", /* GPIOX_9 */
+		"PIN_24", /* GPIOX_10 */
+		"PIN_23", /* GPIOX_11 */
+		"PIN_8",  /* GPIOX_12 */
+		"PIN_10", /* GPIOX_13 */
+		"PIN_29", /* GPIOX_14 */
+		"PIN_31", /* GPIOX_15 */
+		"PIN_12", /* GPIOX_16 */
+		"PIN_3",  /* GPIOX_17 */
+		"PIN_5",  /* GPIOX_18 */
+		"PIN_36"; /* GPIOX_19 */
+	/*
+	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub-hog {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR pins
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ * The SW1 slide should also be set to the correct position.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	mx25u64: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mxicy,mx25u6435f", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&usb {
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&hub_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
new file mode 100644
index 000000000..e26f3e325
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2l.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+/* The Amlogic S922X Rev. C supports the same OPPs as the A311D variant */
+#include "meson-g12b-a311d.dtsi"
+#include "meson-g12b-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-n2l", "amlogic,s922x", "amlogic,g12b";
+	model = "Hardkernel ODROID-N2L";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "ODROID-N2L";
+		audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>,
+				 <&tdmin_c>, <&tdmin_lb>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-7 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&eth_phy {
+	status = "disabled";
+};
+
+&vddcpu_a {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_ab 0 1500 0>;
+};
+
+&vddcpu_b {
+	regulator-min-microvolt = <680000>;
+	regulator-max-microvolt = <1040000>;
+
+	pwms = <&pwm_AO_cd 1 1500 0>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
new file mode 100644
index 000000000..9e12a34b2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
+		/* Using Dummy Speed */
+		gpio-fan,speed-map = <0 0>, <1 1>;
+		#cooling-cells = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "n2:blue";
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ddr_thermal {
+	trips {
+		ddr_active: ddr-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&ddr_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
new file mode 100644
index 000000000..890f5bfeb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ * Copyright (c) 2022 Radxa Limited
+ * Author: Yuntian Zhang <yt@radxa.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-a311d.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "radxa,zero2", "amlogic,a311d", "amlogic,g12b";
+	model = "Radxa Zero2";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial2 = &uart_A;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIOA_12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	ao_5v: regulator-ao-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * Silergy SY8120B1ABC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <730000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "RADXA-ZERO2";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: clock-0 {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"PIN_27", "PIN_28", "PIN_7", "PIN_11", "PIN_13", "PIN_15", "PIN_18", "PIN_40",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "PIN_19", "PIN_21", "PIN_24", "PIN_23",
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "EMMC_PWRSEQ", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "SD_CD", "PIN_36",
+		/* GPIOA */
+		"PIN_32", "PIN_12", "PIN_35", "", "", "PIN_38", "", "",
+		"", "", "", "", "LED_GREEN", "PIN_31", "PIN_3", "PIN_5",
+		/* GPIOX */
+		"", "", "", "", "", "", "SDIO_PWRSEQ", "",
+		"", "", "", "", "", "", "", "",
+		"", "BT_SHUTDOWN", "", "";
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"PIN_8", "PIN_10", "", "BTN_POWER", "", "", "", "PIN_29",
+		"PIN_33", "PIN_37", "FAN", "",
+		/* GPIOE */
+		"", "", "";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&ao_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "disabled";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
new file mode 100644
index 000000000..7f66f263a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-g12b-bananapi.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m2s", "amlogic,s922x", "amlogic,g12b";
+	model = "BananaPi M2S";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
new file mode 100644
index 000000000..bba98f982
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-s922x.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include "meson-g12b-khadas-vim3.dtsi"
+
+/ {
+	compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
new file mode 100644
index 000000000..44c23c984
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12b.dtsi"
+
+/ {
+	cpu_opp_table_0: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1896000000 {
+			opp-hz = /bits/ 64 <1896000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1992000000 {
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1001000>;
+		};
+	};
+
+	cpub_opp_table_1: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <771000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <821000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <891000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <1022000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
new file mode 100644
index 000000000..098a3af6d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
+	model = "Ugoos AM6";
+
+	spdif_dit: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "UGOOS-AM6";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-khadas";
+};
+
+&spdifout {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+	clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb1_pow>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb1_pow>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
new file mode 100644
index 000000000..ac8b71782
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b.dtsi"
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu_a: regulator-vddcpu-a {
+		/*
+		 * MP1653 Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_A";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_ab 0 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddcpu_b: regulator-vddcpu-b {
+		/*
+		 * MP1652 Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU_B";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb1_pow: regulator-usb1-pow {
+		compatible = "regulator-fixed";
+		regulator-name = "USB1_POW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* connected to SY6280A Power Switch */
+		gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr_en: regulator-usb-pwr-en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to USB3 Type-A Port power enable */
+		gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu_b>;
+	operating-points-v2 = <&cpu_opp_table_0>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu100 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu101 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu102 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu103 {
+	cpu-supply = <&vddcpu_a>;
+	operating-points-v2 = <&cpub_opp_table_1>;
+	clocks = <&clkc CLKID_CPUB_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_a_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&usb1_pow>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb1_pow>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
new file mode 100644
index 000000000..86e6ceb31
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12.dtsi"
+
+/ {
+	compatible = "amlogic,g12b";
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu100>;
+				};
+
+				core1 {
+					cpu = <&cpu101>;
+				};
+
+				core2 {
+					cpu = <&cpu102>;
+				};
+
+				core3 {
+					cpu = <&cpu103>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <592>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <592>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu102: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu103: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+};
+
+&clkc {
+	compatible = "amlogic,g12b-clkc";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&mali {
+	dma-coherent;
+};
+
+&pmu {
+	compatible = "amlogic,g12b-ddr-pmu";
+};
+
+&npu {
+	power-domains = <&pwrc PWRC_G12A_NNA_ID>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
new file mode 100644
index 000000000..5e7b9273b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&vcc5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-PC";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Speaker", "7J4-14 LEFT",
+				"Speaker", "7J4-11 RIGHT";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"7J4-14 LEFT", "AU2 OUTL",
+				"7J4-11 RIGHT", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		reg = <0>;
+		max-speed = <1000>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the reset pin of the usb HUB is driven high to take
+	 * it out of reset.
+	 */
+	usb1_rst_pins: usb1_rst_irq {
+		mux {
+			groups = "GPIODV_3";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	/* Make sure the phy irq pin is properly configured as input */
+	eth_phy_irq_pins: eth_phy_irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc5v>;
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_C {
+	pinctrl-0 = <&i2c_c_dv18_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@51 {
+		reg = <0x51>;
+		compatible = "nxp,pcf8563";
+		#clock-cells = <0>;
+		clock-output-names = "rtc_clkout";
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_3_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	status = "okay";
+};
+
+&spifc {
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	gd25lq128: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb1_rst_pins>;
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
new file mode 100644
index 000000000..f9771b51c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+		opp-744000000 {
+			opp-hz = /bits/ 64 <744000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
new file mode 100644
index 000000000..18f7b7302
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
+ * the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
+ */
+
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "P230-Q200";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLP",
+				"AU2 INR", "ACODEC LORP",
+				"AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-5 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
new file mode 100644
index 000000000..2673f0dba
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -0,0 +1,676 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &sd_emmc_b; /* SD card */
+		mmc1 = &sd_emmc_c; /* eMMC */
+		mmc2 = &sd_emmc_a; /* SDIO */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+
+		/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved_alt: secmon@5000000 {
+			reg = <0x0 0x05000000 0x0 0x300000>;
+			no-map;
+		};
+
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x10000000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		simplefb_cvbs: framebuffer-cvbs {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-cvbs";
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "amlogic,simple-framebuffer",
+				     "simple-framebuffer";
+			amlogic,pipeline = "vpu-hdmi";
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&scpi_sensors 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		read-only;
+		secure-monitor = <&sm>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth-mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: bus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			gpio_intc: interrupt-controller@9880 {
+				compatible = "amlogic,meson-gpio-intc";
+				reg = <0x0 0x9880 0x0 0x10>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+				status = "disabled";
+			};
+
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x9c>;
+				#reset-cells = <1>;
+			};
+
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x0 0x5400 0x0 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x84c0 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				fifo-size = <128>;
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x84dc 0x0 0x18>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x0 0x8680 0x0 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-gx-uart";
+				reg = <0x0 0x8700 0x0 0x18>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			clock-measure@8758 {
+				compatible = "amlogic,meson-gx-clk-measure";
+				reg = <0x0 0x8758 0x0 0x10>;
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spicc: spi@8d80 {
+				compatible = "amlogic,meson-gx-spicc";
+				reg = <0x0 0x08d80 0x0 0x80>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spifc: spi@8c80 {
+				compatible = "amlogic,meson-gxbb-spifc";
+				reg = <0x0 0x08c80 0x0 0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		sram: sram@c8000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-sram@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-sram@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
+		aobus: bus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			sysctrl_AO: sys-ctrl@0 {
+				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+				reg = <0x0 0x0 0x0 0x100>;
+
+				clkc_AO: clock-controller {
+					compatible = "amlogic,meson-gx-aoclkc";
+					#clock-cells = <1>;
+					#reset-cells = <1>;
+				};
+			};
+
+			cec_AO: cec@100 {
+				compatible = "amlogic,meson-gx-ao-cec";
+				reg = <0x0 0x00100 0x0 0x14>;
+				interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sec_AO: ao-secure@140 {
+				compatible = "amlogic,meson-gx-ao-secure", "syscon";
+				reg = <0x0 0x140 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x004c0 0x0 0x18>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+				reg = <0x0 0x004e0 0x0 0x18>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			i2c_AO: i2c@500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x500 0x0 0x20>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@550 {
+				compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
+				reg = <0x0 0x00550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vdec: video-codec@c8820000 {
+			compatible = "amlogic,gx-vdec";
+			reg = <0x0 0xc8820000 0x0 0x10000>,
+			      <0x0 0xc110a580 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&sysctrl_AO>;
+			amlogic,canvas = <&canvas>;
+		};
+
+		periphs: bus@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			hwrng: rng@0 {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+		};
+
+		dmcbus: bus@c8838000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8838000 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,canvas";
+				reg = <0x0 0x48 0x0 0x14>;
+			};
+		};
+
+		hiubus: bus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			sysctrl: system-controller@0 {
+				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
+			};
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gxbb-dwmac",
+				     "snps,dwmac-3.70a",
+				     "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000>,
+			      <0x0 0xc8834540 0x0 0x4>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
+			status = "disabled";
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+			sd_emmc_a: mmc@70000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x70000 0x0 0x800>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sd_emmc_b: mmc@72000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x72000 0x0 0x800>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sd_emmc_c: mmc@74000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x74000 0x0 0x800>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>;
+			reg-names = "vpu", "hhi";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			amlogic,canvas = <&canvas>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+
+			/* HDMI-TX output port */
+			hdmi_tx_port: port@1 {
+				reg = <1>;
+
+				hdmi_tx_out: endpoint {
+					remote-endpoint = <&hdmi_tx_in>;
+				};
+			};
+		};
+
+		hdmi_tx: hdmi-tx@c883a000 {
+			compatible = "amlogic,meson-gx-dw-hdmi";
+			reg = <0x0 0xc883a000 0x0 0x1c>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "HDMITX";
+			status = "disabled";
+
+			/* VPU VENC Input */
+			hdmi_tx_venc_port: port@0 {
+				reg = <0>;
+
+				hdmi_tx_in: endpoint {
+					remote-endpoint = <&hdmi_tx_out>;
+				};
+			};
+
+			/* TMDS Output */
+			hdmi_tx_tmds_port: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
new file mode 100644
index 000000000..e238f1f10
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "videostrong,kii-pro", "amlogic,meson-gxbb";
+	model = "Videostrong KII Pro";
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led {
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KII-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-videostrong-kii-pro";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
new file mode 100644
index 000000000..1fd2e56e6
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+	model = "FriendlyARM NanoPi K2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-stat {
+			label = "nanopi-k2:blue:stat";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_tf: regulator-vddio-tf {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_TF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+		         <1800000 1>;
+
+		regulator-settling-time-up-us = <100>;
+		regulator-settling-time-down-us = <5000>;
+	};
+
+	wifi_32k: wifi-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi_32k>;
+		clock-names = "ext_clock";
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	/* CVBS is available on CON1 pin 36, disabled by default */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "NANOPI-K2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
+			  "VCCK En", "CON1 Header Pin31",
+			  "I2S Header Pin6", "IR In", "I2S Header Pin7",
+			  "I2S Header Pin3", "I2S Header Pin4",
+			  "I2S Header Pin5", "HDMI CEC", "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
+			  "CON1 Header Pin33",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "eMMC DS",
+			  "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VDDEE Regulator", "VCCK Regulator",
+			  /* Bank GPIOY */
+			  "CON1 Header Pin7", "CON1 Header Pin11",
+			  "CON1 Header Pin13", "CON1 Header Pin15",
+			  "CON1 Header Pin18", "CON1 Header Pin19",
+			  "CON1 Header Pin22", "CON1 Header Pin21",
+			  "CON1 Header Pin24", "CON1 Header Pin23",
+			  "CON1 Header Pin26", "CON1 Header Pin29",
+			  "CON1 Header Pin32", "CON1 Header Pin8",
+			  "CON1 Header Pin10", "CON1 Header Pin16",
+			  "CON1 Header Pin12",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "", "", "", "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST", "",
+			  /* Bank GPIOCLK */
+			  "", "CON1 Header Pin35", "", "";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_ao18>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "disabled";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&wifi_32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddio_ao3v3>;
+		vddio-supply = <&vddio_ao18>;
+		host-wakeup-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* 40-pin CON1 */
+&uart_C {
+	status = "disabled";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
new file mode 100644
index 000000000..4aab1ab70
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "nexbox,a95x", "amlogic,meson-gxbb";
+	model = "NEXBOX A95X";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "a95x:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "NEXBOX-A95X";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
new file mode 100644
index 000000000..e6d2de7c4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb";
+	model = "Hardkernel ODROID-C2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	usb_otg_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_OTG_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/*
+		 * signal name from schematics: PWREN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * signal name from schematics: USB_POWER
+		 */
+		vin-supply = <&p5v0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-blue {
+			label = "c2:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	p5v0: regulator-p5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	hdmi_p5v0: regulator-hdmi_p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		/* AP2331SA-7 */
+		vin-supply = <&p5v0>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* U16 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+		/* U12/U13 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U18 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U17 RT9179GB */
+		vin-supply = <&p5v0>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		/* U11 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	ddr3_1v5: regulator-ddr3_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		/* U15 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "ODROID-C2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_p5v0>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
+			  "USB HUB nRESET", "USB OTG Power En",
+			  "J7 Header Pin2", "IR In", "J7 Header Pin4",
+			  "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7",
+			  "HDMI CEC", "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
+			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",
+			  "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En",
+			  "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3",
+			  "Eth PHY nRESET", "Eth PHY Intc",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4",
+			  "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk",
+			  "eMMC Reset", "eMMC CMD",
+			  "", "", "", "", "", "", "",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "PWM D", "PWM B",
+			  /* Bank GPIOY */
+			  "Revision Bit0", "Revision Bit1", "",
+			  "J2 Header Pin35", "", "", "", "J2 Header Pin36",
+			  "J2 Header Pin31", "", "", "", "TF VDD En",
+			  "J2 Header Pin32", "J2 Header Pin26", "", "",
+			  /* Bank GPIOX */
+			  "J2 Header Pin29", "J2 Header Pin24",
+			  "J2 Header Pin23", "J2 Header Pin22",
+			  "J2 Header Pin21", "J2 Header Pin18",
+			  "J2 Header Pin33", "J2 Header Pin19",
+			  "J2 Header Pin16", "J2 Header Pin15",
+			  "J2 Header Pin12", "J2 Header Pin13",
+			  "J2 Header Pin8", "J2 Header Pin10",
+			  "", "", "", "", "",
+			  "J2 Header Pin11", "", "J2 Header Pin7", "",
+			  /* Bank GPIOCLK */
+			  "", "", "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc1v8>;
+};
+
+&scpi_clocks {
+	status = "disabled";
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "disabled";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb0 {
+	status = "disabled";
+};
+
+&usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G USB 2.0 hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpio = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
new file mode 100644
index 000000000..3c93d1898
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "amlogic,p200", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P200 Development Board";
+
+	avdd18_usb_adc: regulator-avdd18_usb_adc {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD18_USB_ADC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@3 {
+			/* Micrel KSZ9031 (0x00221620) */
+			reg = <3>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&avdd18_usb_adc>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
new file mode 100644
index 000000000..150a82f3b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "amlogic,p201", "amlogic,meson-gxbb";
+	model = "Amlogic Meson GXBB P201 Development Board";
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0>, <10000>, <1000000>;
+	snps,reset-active-low;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
new file mode 100644
index 000000000..e803a466f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		/* signal name in schematic: USB_PWR_EN */
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+
+		regulator-settling-time-up-us = <10000>;
+		regulator-settling-time-down-us = <150000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs_connector: cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
new file mode 100644
index 000000000..c928adf85
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Meta";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
new file mode 100644
index 000000000..e81e1d68b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Pro";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
new file mode 100644
index 000000000..a8fca0c69
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Telos";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
new file mode 100644
index 000000000..e8303089b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "vega-s95:blue:on";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "VEGA-S95";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-vega-s9x";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
new file mode 100644
index 000000000..af9ea32a2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-wetek.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "WETEK-HUB";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-hub";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
new file mode 100644
index 000000000..e1b74b174
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-wetek.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		led-wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "WETEK-PLAY2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_y_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
new file mode 100644
index 000000000..94dafb955
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Kevin Hilman <khilman@kernel.org>
+ */
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			/* red in suspend or power-off */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	usb_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vddio_ao18>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
new file mode 100644
index 000000000..12ef6e81c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+#include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
+#include <dt-bindings/gpio/meson-gxbb-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
+/ {
+	compatible = "amlogic,meson-gxbb";
+
+	soc {
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
+		};
+
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
+		};
+	};
+};
+
+&aiu {
+	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+			};
+		};
+
+		spdif_out_ao_13_pins: spdif_out_ao_13 {
+			mux {
+				groups = "spdif_out_ao_13";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "mpeg-clk";
+};
+
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gxbb-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&sysctrl {
+	clkc: clock-controller {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 0 119>;
+		};
+
+		emmc_pins: emmc {
+			mux-0 {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd";
+				function = "emmc";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "emmc_clk";
+				function = "emmc";
+				bias-disable;
+			};
+		};
+
+		emmc_ds_pins: emmc-ds {
+			mux {
+				groups = "emmc_ds";
+				function = "emmc";
+				bias-pull-down;
+			};
+		};
+
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		spi_pins: spi-pins {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux-0 {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd";
+				function = "sdcard";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdcard_clk";
+				function = "sdcard";
+				bias-disable;
+			};
+		};
+
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_pins: sdio {
+			mux-0 {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd";
+				function = "sdio";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdio_clk";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+				bias-disable;
+			};
+		};
+
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
+				bias-disable;
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+				bias-disable;
+			};
+		};
+
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+				bias-disable;
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+				bias-disable;
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch23_y_pins: i2sout_ch23_y {
+			mux {
+				groups = "i2sout_ch23_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch45_y_pins: i2sout_ch45_y {
+			mux {
+				groups = "i2sout_ch45_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch67_y_pins: i2sout_ch67_y {
+			mux {
+				groups = "i2sout_ch67_y";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		spdif_out_y_pins: spdif_out_y {
+			mux {
+				groups = "spdif_out_y";
+				function = "spdif_out";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&pwrc {
+	resets = <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_VCBUS>,
+		 <&reset RESET_BT656>,
+		 <&reset RESET_DVIN_RESET>,
+		 <&reset RESET_RDMA>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC>,
+		 <&reset RESET_VDI6>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
+	clocks = <&clkc CLKID_VPU>,
+	         <&clkc CLKID_VAPB>;
+	clock-names = "vpu", "vapb";
+	/*
+	 * VPU clocking is provided by two identical clock paths
+	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+	 * free mux to safely change frequency while running.
+	 * Same for VAPB but with a final gate after the glitch free mux.
+	 */
+	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+			  <&clkc CLKID_VPU_0>,
+			  <&clkc CLKID_VPU>, /* Glitch free mux */
+			  <&clkc CLKID_VAPB_0_SEL>,
+			  <&clkc CLKID_VAPB_0>,
+			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VPU_0>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VAPB_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>, /* Do Nothing */
+			       <0>, /* Do Nothing */
+			       <250000000>,
+			       <0>; /* Do Nothing */
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_A>;
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_B>;
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_C>;
+};
+
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
new file mode 100644
index 000000000..478e755cc
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gx-mali450.dtsi"
+
+&mali {
+	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
new file mode 100644
index 000000000..a29b49f05
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S805X-AC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		/*
+		 * The pads are present but no connector is soldered on
+		 * 2J2, so keep this off by default.
+		 */
+		status = "disabled";
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	dc_5v: regulator-dc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+
+		/*
+		 * This is controlled by GPIOAO_9 we reserve this but
+		 * claiming it as done below reset the board anyway
+		 * Need to investigate this
+		 *
+		 * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-AC";
+		audio-widgets = "Speaker", "9J5-3 LEFT",
+				"Speaker", "9J5-2 RIGHT";
+		audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
+				"9J5-2 RIGHT", "ACODEC LORN";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "7J1 Header Pin31",
+			  "", "", "", "",
+			  "IR In",
+			  "HDMI CEC",
+			  "5V VCCK Regulator",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "", "7J1 Header Pin13",
+			  "7J1 Header Pin15",
+			  "7J1 Header Pin7",
+			  "7J1 Header Pin12",
+			  "7J1 Header Pin16",
+			  "7J1 Header Pin18",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
+			  "", "SPI NOR Chip Select",
+			  /* Bank CARD */
+			  "", "", "", "", "", "", "",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "7J1 Header Pin27", "7J1 Header Pin28", "",
+			  "7J1 Header Pin29",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "", "", "7J1 Header Pin32", "", "",
+			  /* Bank GPIOCLK */
+			  "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
new file mode 100644
index 000000000..c0d6eb551
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s805x.dtsi"
+
+/ {
+	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S805X) P241 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+		ethernet0 = &ethmac;
+	};
+
+	au2: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&vcc_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "GXL-P241";
+		audio-aux-devs = <&au2>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
new file mode 100644
index 000000000..299758498
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&gpu_opp_table {
+	opp-744000000 {
+		status = "disabled";
+	};
+};
+
+&mali {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
new file mode 100644
index 000000000..100a1cfee
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905D-PC";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
new file mode 100644
index 000000000..a4fa186f0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "videostrong,gxl-kii-pro", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "MeCool KII Pro";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	linux,rc-map-name = "rc-mecool-kii-pro";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
new file mode 100644
index 000000000..c1470416f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905D) P230 Development Board";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+/* P230 has exclusive choice between internal or external PHY */
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		/* External PHY reset is shared with internal PHY Led signal */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		eee-broken-1000t;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
new file mode 100644
index 000000000..92c425d02
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905D) P231 Development Board";
+};
+
+/* P231 has only internal PHY port */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
new file mode 100644
index 000000000..393d3cb33
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 He Yangxuan
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d-p230.dts"
+
+/ {
+	compatible = "phicomm,n1", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Phicomm N1";
+
+	cvbs-connector {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "n1:white:status";
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	status = "disabled";
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
new file mode 100644
index 000000000..c490dbbf0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "smartlabs,sml5442tw", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "SmartLabs SML-5442TW";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-yellow {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+        linux,rc-map-name = "rc-khamsin";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "qcom,qca9377-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts
new file mode 100644
index 000000000..595b49085
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "OSMC Vero 4K Plus";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-standby {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <0>;
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		pinctrl-0 = <&eth_phy_irq_pin>;
+		pinctrl-names = "default";
+
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/* Ensure the phy irq pin is properly configured as input */
+	eth_phy_irq_pin: eth-phy-irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&usb {
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/* HDMI_5V also supplies the USB VBUS */
+	phy-supply = <&hdmi_5v>;
+};
+
+&usb2_phy0 {
+	/* HDMI_5V also supplies the USB VBUS */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
new file mode 100644
index 000000000..433219195
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+	compatible = "amlogic,s905d", "amlogic,meson-gxl";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
new file mode 100644
index 000000000..a18d6d241
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
+ * Copyright (c) 2020 JetHome
+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
+ * Author: Alexey Shevelkin <ash@tvip.ru>
+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "JetHome JetHub J80";
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		linux,cma {
+			size = <0x0 0x1000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;   /* Console */
+		serial1 = &uart_A;    /* Bluetooth */
+		serial2 = &uart_AO_B; /* Wireless module 1 */
+		serial3 = &uart_C;    /* Wireless module 2 */
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&efuse {
+	bt_mac: bt-mac@6 {
+		reg = <0x6 0x6>;
+	};
+
+	wifi_mac: wifi-mac@c {
+		reg = <0xc 0x6>;
+	};
+};
+
+&sn {
+	reg = <0x32 0x20>;
+};
+
+&eth_mac {
+	reg = <0x0 0x6>;
+};
+
+&bid {
+	reg = <0x12 0x20>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* Console UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* S905W only has access to its internal PHY */
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&internal_phy {
+	status = "okay";
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&uart_C {
+	status = "okay";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_b_pins>;
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
new file mode 100644
index 000000000..ecc9df7ca
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905W) P281 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
new file mode 100644
index 000000000..6705c2082
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Oranth Tanix TX3 Mini";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
new file mode 100644
index 000000000..c8d74e61d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Carlo Caione
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Hwacom AmazeTV (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <100000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
new file mode 100644
index 000000000..fea65f205
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Khadas VIM";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	aliases {
+		serial2 = &uart_AO_B;
+		ethernet0 = &ethmac;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KHADAS-VIM";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-khadas";
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Power Key In",
+			  "J9 Header Pin35",
+			  "J9 Header Pin16",
+			  "J9 Header Pin15",
+			  "J9 Header Pin33",
+			  "IR In",
+			  "HDMI CEC",
+			  "SYS LED",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Power OFF",
+			  "VCCK Enable",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "SPDIF",
+			  "J9 Header Pin37",
+			  "J9 Header Pin30",
+			  "J9 Header Pin29",
+			  "J9 Header Pin32",
+			  "J9 Header Pin31",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "", "BOOT_MODE", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2",
+			  "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD",
+			  "WIFI Power Enable", "WIFI WAKE HOST",
+			  "Bluetooth PCM DOUT", "Bluetooth PCM DIN",
+			  "Bluetooth PCM SYNC", "Bluetooth PCM CLK",
+			  "Bluetooth UART TX", "Bluetooth UART RX",
+			  "Bluetooth UART CTS", "Bluetooth UART RTS",
+			  "WIFI 32K", "Bluetooth Enable",
+			  "Bluetooth WAKE HOST",
+			  /* Bank GPIOCLK */
+			  "", "J9 Header Pin39";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal> , <&xtal>;
+	clock-names = "clkin0", "clkin1" ;
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+};
+
+&sd_emmc_a {
+	max-frequency = <100000000>;
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
new file mode 100644
index 000000000..2825db91e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905X-CC V2";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-CC-V2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	hdmi-supply = <&vcc5v>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+
+	status = "okay";
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	nor_4u1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
new file mode 100644
index 000000000..27093e6ac
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905x-cc", "amlogic,s905x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905X-CC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-system {
+			label = "librecomputer:system-status";
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		led-blue {
+			label = "librecomputer:blue";
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_card: regulator-vcc-card {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* This is provided by LDOs on the eMMC daugther card */
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "LIBRETECH-CC";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "Blue LED",
+			  "SDCard Voltage Switch",
+			  "7J1 Header Pin5",
+			  "7J1 Header Pin3",
+			  "7J1 Header Pin12",
+			  "IR In",
+			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
+			  "7J1 Header Pin13",
+			  /* GPIO_TEST_N */
+			  "7J1 Header Pin15";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "HDMI_5V_EN", "9J1 Header Pin2",
+			  "Analog Audio Mute",
+			  "2J3 Header Pin6",
+			  "2J3 Header Pin5",
+			  "2J3 Header Pin4",
+			  "2J3 Header Pin3",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "ALT BOOT MODE", "", "", "", "eMMC Data Strobe",
+			  /* Bank CARD */
+			  "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD",
+			  "SDCard D3", "SDCard D2", "SDCard Det",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "Green LED", "VCCK Enable",
+			  "7J1 Header Pin27", "7J1 Header Pin28",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "7J1 Header Pin16", "7J1 Header Pin18",
+			  "7J1 Header Pin32", "7J1 Header Pin29",
+			  "7J1 Header Pin31",
+			  /* Bank GPIOCLK */
+			  "7J1 Header Pin7", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/*
+	 * even though the schematics don't show it:
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
new file mode 100644
index 000000000..f1acca5c4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "NEXBOX A95X (S905X)";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_card: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+
+		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_card>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
new file mode 100644
index 000000000..9b4ea6a49
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905X) P212 Development Board";
+
+	dio2133: analog-amplifier {
+		compatible = "simple-audio-amplifier";
+		sound-name-prefix = "AU2";
+		VCC-supply = <&hdmi_5v>;
+		enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "S905X-P212";
+		audio-aux-devs = <&dio2133>;
+		audio-widgets = "Line", "Lineout";
+		audio-routing = "AU2 INL", "ACODEC LOLN",
+				"AU2 INR", "ACODEC LORN",
+				"Lineout", "AU2 OUTL",
+				"Lineout", "AU2 OUTR";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+
+			codec-1 {
+				sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
new file mode 100644
index 000000000..a150cc0e1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gx-p23x-q20x.dtsi:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ * - Copyright (c) 2016 BayLibre, SAS.
+ *   Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/* Common DTSI for devices which are based on the P212 reference board. */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/*
+	 * HDMI_5V is also used as supply for the USB VBUS.
+	 */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
new file mode 100644
index 000000000..40c19f69e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+#include "meson-gxl-mali.dtsi"
+
+/ {
+	compatible = "amlogic,s905x", "amlogic,meson-gxl";
+};
+
+/* S905X only has access to its internal PHY */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
new file mode 100644
index 000000000..17bcfa470
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
+#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+
+/ {
+	compatible = "amlogic,meson-gxl";
+
+	soc {
+		usb: usb@d0078080 {
+			compatible = "amlogic,meson-gxl-usb-ctrl";
+			reg = <0x0 0xd0078080 0x0 0x20>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "usb_ctrl", "ddr";
+			resets = <&reset RESET_USB_OTG>;
+
+			dr_mode = "otg";
+
+			phys = <&usb2_phy0>, <&usb2_phy1>;
+			phy-names = "usb2-phy0", "usb2-phy1";
+
+			dwc2: usb@c9100000 {
+				compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+				reg = <0x0 0xc9100000 0x0 0x40000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clkc CLKID_USB1>;
+				clock-names = "otg";
+				phys = <&usb2_phy1>;
+				dr_mode = "peripheral";
+				g-rx-fifo-size = <192>;
+				g-np-tx-fifo-size = <128>;
+				g-tx-fifo-size = <128 128 16 16 16>;
+			};
+
+			dwc3: usb@c9000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xc9000000 0x0 0x100000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		acodec: audio-controller@c8832000 {
+			compatible = "amlogic,t9015";
+			reg = <0x0 0xc8832000 0x0 0x14>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "ACODEC";
+			clocks = <&clkc CLKID_ACODEC>;
+			clock-names = "pclk";
+			resets = <&reset RESET_ACODEC>;
+			status = "disabled";
+		};
+
+		crypto: crypto@c883e000 {
+			compatible = "amlogic,gxl-crypto";
+			reg = <0x0 0xc883e000 0x0 0x36>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc CLKID_BLKMV>;
+			clock-names = "blkmv";
+			status = "okay";
+		};
+	};
+};
+
+&aiu {
+	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&apb {
+	usb2_phy0: phy@78000 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78000 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	usb2_phy1: phy@78020 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78020 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+};
+
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+
+	mdio0: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+	};
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxl-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 14>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_0_1_pins: uart_ao_b_0_1 {
+			mux {
+				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+				bias-disable;
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+				bias-disable;
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_a_8_pins: pwm_ao_a_8 {
+			mux {
+				groups = "pwm_ao_a_8";
+				function = "pwm_ao_a";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		pwm_ao_b_6_pins: pwm_ao_b_6 {
+			mux {
+				groups = "pwm_ao_b_6";
+				function = "pwm_ao_b";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+			mux {
+				groups = "i2s_out_ch23_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+			mux {
+				groups = "i2s_out_ch45_ao";
+				function = "i2s_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_6_pins: spdif_out_ao_6 {
+			mux {
+				groups = "spdif_out_ao_6";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		spdif_out_ao_9_pins: spdif_out_ao_9 {
+			mux {
+				groups = "spdif_out_ao_9";
+				function = "spdif_out_ao";
+				bias-disable;
+			};
+		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	clocks = <&clkc_AO CLKID_AO_CEC_32K>;
+	clock-names = "core";
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "mpeg-clk";
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-gxl-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&sysctrl {
+	clkc: clock-controller {
+		compatible = "amlogic,gxl-clkc";
+		#clock-cells = <1>;
+		clocks = <&xtal>;
+		clock-names = "xtal";
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxl-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_periphs 0 0 100>;
+		};
+
+		emmc_pins: emmc {
+			mux-0 {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd";
+				function = "emmc";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "emmc_clk";
+				function = "emmc";
+				bias-disable;
+			};
+		};
+
+		emmc_ds_pins: emmc-ds {
+			mux {
+				groups = "emmc_ds";
+				function = "emmc";
+				bias-pull-down;
+			};
+		};
+
+		emmc_clk_gate_pins: emmc_clk_gate {
+			mux {
+				groups = "BOOT_8";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		spi_pins: spi-pins {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		spi_idle_high_pins: spi-idle-high-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-up;
+			};
+		};
+
+		spi_idle_low_pins: spi-idle-low-pins {
+			mux {
+				groups = "spi_sclk";
+				bias-pull-down;
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+				bias-disable;
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux-0 {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd";
+				function = "sdcard";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdcard_clk";
+				function = "sdcard";
+				bias-disable;
+			};
+		};
+
+		sdcard_clk_gate_pins: sdcard_clk_gate {
+			mux {
+				groups = "CARD_2";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_pins: sdio {
+			mux-0 {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd";
+				function = "sdio";
+				bias-pull-up;
+			};
+
+			mux-1 {
+				groups = "sdio_clk";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		sdio_clk_gate_pins: sdio_clk_gate {
+			mux {
+				groups = "GPIOX_4";
+				function = "gpio_periphs";
+				bias-pull-down;
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+				bias-disable;
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				     "i2c_sda_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				      "i2c_sda_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				      "i2c_sda_c";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		i2c_c_dv18_pins: i2c_c_dv18 {
+			mux {
+				groups = "i2c_sck_c_dv19",
+				      "i2c_sda_c_dv18";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
+		eth_pins: eth_c {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+				bias-disable;
+			};
+		};
+
+		eth_link_led_pins: eth_link_led {
+			mux {
+				groups = "eth_link_led";
+				function = "eth_led";
+				bias-disable;
+			};
+		};
+
+		eth_act_led_pins: eth_act_led {
+			mux {
+				groups = "eth_act_led";
+				function = "eth_led";
+			};
+		};
+		
+		pwm_a_pins: pwm_a {
+			mux {
+				groups = "pwm_a";
+				function = "pwm_a";
+				bias-disable;
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+				bias-disable;
+			};
+		};
+
+		pwm_c_pins: pwm_c {
+			mux {
+				groups = "pwm_c";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		pwm_f_clk_pins: pwm_f_clk {
+			mux {
+				groups = "pwm_f_clk";
+				function = "pwm_f";
+				bias-disable;
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f";
+				bias-disable;
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+				bias-disable;
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+				bias-disable;
+			};
+		};
+
+		i2s_am_clk_pins: i2s_am_clk {
+			mux {
+				groups = "i2s_am_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s_out_ao_clk {
+			mux {
+				groups = "i2s_out_ao_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s_out_lr_clk {
+			mux {
+				groups = "i2s_out_lr_clk";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_pins: i2s_out_ch01 {
+			mux {
+				groups = "i2s_out_ch01";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+		i2sout_ch23_z_pins: i2sout_ch23_z {
+			mux {
+				groups = "i2sout_ch23_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch45_z_pins: i2sout_ch45_z {
+			mux {
+				groups = "i2sout_ch45_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		i2sout_ch67_z_pins: i2sout_ch67_z {
+			mux {
+				groups = "i2sout_ch67_z";
+				function = "i2s_out";
+				bias-disable;
+			};
+		};
+
+		spdif_out_h_pins: spdif_out_ao_h {
+			mux {
+				groups = "spdif_out_h";
+				function = "spdif_out";
+				bias-disable;
+			};
+		};
+	};
+
+	eth_phy_mux: mdio@558 {
+		reg = <0x0 0x558 0x0 0xc>;
+		compatible = "amlogic,gxl-mdio-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_FCLK_DIV4>;
+		clock-names = "ref";
+		mdio-parent-bus = <&mdio0>;
+
+		external_mdio: mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		internal_mdio: mdio@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			internal_phy: ethernet-phy@8 {
+				compatible = "ethernet-phy-id0181.4400";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <8>;
+				max-speed = <100>;
+			};
+		};
+	};
+};
+
+&pwrc {
+	resets = <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_VCBUS>,
+		 <&reset RESET_BT656>,
+		 <&reset RESET_DVIN_RESET>,
+		 <&reset RESET_RDMA>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC>,
+		 <&reset RESET_VDI6>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
+	clocks = <&clkc CLKID_VPU>,
+	         <&clkc CLKID_VAPB>;
+	clock-names = "vpu", "vapb";
+	/*
+	 * VPU clocking is provided by two identical clock paths
+	 * VPU_0 and VPU_1 muxed to a single clock by a glitch
+	 * free mux to safely change frequency while running.
+	 * Same for VAPB but with a final gate after the glitch free mux.
+	 */
+	assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
+			  <&clkc CLKID_VPU_0>,
+			  <&clkc CLKID_VPU>, /* Glitch free mux */
+			  <&clkc CLKID_VAPB_0_SEL>,
+			  <&clkc CLKID_VAPB_0>,
+			  <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VPU_0>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_VAPB_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>, /* Do Nothing */
+			       <0>, /* Do Nothing */
+			       <250000000>,
+			       <0>; /* Do Nothing */
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "adc_clk", "adc_sel";
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&clkc CLKID_SD_EMMC_A_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_A>;
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&clkc CLKID_SD_EMMC_B_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_B>;
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&clkc CLKID_SD_EMMC_C_CLK0>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+	resets = <&reset RESET_SD_EMMC_C>;
+};
+
+&simplefb_hdmi {
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+};
+
+&spicc {
+	clocks = <&clkc CLKID_SPICC>;
+	clock-names = "core";
+	resets = <&reset RESET_PERIPHS_SPICC>;
+	num-cs = <1>;
+};
+
+&spifc {
+	clocks = <&clkc CLKID_SPI>;
+};
+
+&uart_A {
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_AO_B {
+	clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
+	clocks = <&clkc CLKID_DOS_PARSER>,
+		 <&clkc CLKID_DOS>,
+		 <&clkc CLKID_VDEC_1>,
+		 <&clkc CLKID_VDEC_HEVC>;
+	clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
+	resets = <&reset RESET_PARSER>;
+	reset-names = "esparser";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
new file mode 100644
index 000000000..2c267884c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-gt1-ultimate.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Beelink GT1 Ultimate";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
new file mode 100644
index 000000000..860f30749
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Khadas VIM2";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial2 = &uart_AO_B;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
+			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
+		/* Dummy RPM values since fan is optional */
+		gpio-fan,speed-map =
+				<0 0>,
+				<1 1>,
+				<2 2>,
+				<3 3>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "vim:red:power";
+			pwms = <&pwm_AO_ab 1 7812500 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	hdmi_5v: regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "KHADAS-VIM2";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+	};
+
+	map1 {
+		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/*
+ * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
+ * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q16", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+/* This one is connected to the Bluetooth module */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
+&uart_AO_B {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_b_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
new file mode 100644
index 000000000..f5b3424c0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "videostrong,gxm-kiii-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "MeCool KIII Pro";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0xC0000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-mecool-kiii-pro";
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
new file mode 100644
index 000000000..1703da323
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "minix,neo-u9h", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Minix Neo U9-H";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-minix-neo";
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		wakeup-source;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
new file mode 100644
index 000000000..7d525bdb0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm";
+	model = "NEXBOX A1";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "NEXBOX-A1";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
new file mode 100644
index 000000000..d4858afa0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Amlogic Meson GXM (S912) Q200 Development Board";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Q200 has exclusive choice between internal or external PHY */
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		/* External PHY reset is shared with internal PHY Led signal */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_15 */
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
new file mode 100644
index 000000000..d02b80d77
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Amlogic Meson GXM (S912) Q201 Development Board";
+};
+
+/* Q201 has only internal PHY port */
+&ethmac {
+	phy-mode = "rmii";
+	phy-handle = <&internal_phy>;
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
new file mode 100644
index 000000000..50d49aec4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * Based on nexbox-a1:
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+	compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "R-Box Pro";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	spdif_dit: audio-codec-0 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			label = "rbox-pro:blue:on";
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-red {
+			label = "rbox-pro:red:standby";
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "RBOX-PRO";
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+			};
+		};
+
+		dai-link-3 {
+			sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+			codec-0 {
+				sound-dai = <&spdif_dit>;
+			};
+		};
+
+		dai-link-4 {
+			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+			codec-0 {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&aiu {
+	status = "okay";
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: brcmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
new file mode 100644
index 000000000..4eda9f634
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s912-pc", "amlogic,s912",
+		     "amlogic,meson-gxm";
+	model = "Libre Computer AML-S912-PC";
+
+	typec2_vbus: regulator-typec2_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "TYPEC2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the irq pin of the TYPE C controller is not driven
+	 * by the SoC.
+	 */
+	fusb302_irq_pins: fusb302_irq {
+		mux {
+			groups = "GPIODV_0";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&i2c_C {
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		pinctrl-0 = <&fusb302_irq_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+		vbus-supply = <&typec2_vbus>;
+
+		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+		};
+	};
+};
+
+&usb2_phy2 {
+	phy-supply = <&typec2_vbus>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
new file mode 100644
index 000000000..d3fdba4da
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2017 Oleg <balbes-150@yandex.ru>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s96", "amlogic,s912", "amlogic,meson-gxm";
+	model = "Tronsmart Vega S96";
+
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-vega-s9x";
+};
+
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
new file mode 100644
index 000000000..f8c40340b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "WeTek Core 2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+&ethmac {
+	status = "disabled";
+};
+
+&internal_phy {
+	status = "disabled";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
new file mode 100644
index 000000000..411cc312f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include "meson-gxl.dtsi"
+
+/ {
+	compatible = "amlogic,meson-gxm";
+
+	cpus {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu1: cpu@1 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu2: cpu@2 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu3: cpu@3 {
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	usb2_phy2: phy@78040 {
+		compatible = "amlogic,meson-gxl-usb2-phy";
+		#phy-cells = <0>;
+		reg = <0x0 0x78040 0x0 0x20>;
+		clocks = <&clkc CLKID_USB>;
+		clock-names = "phy";
+		resets = <&reset RESET_USB_OTG>;
+		reset-names = "phy";
+		status = "okay";
+	};
+
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxm-mali", "arm,mali-t820";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&clkc CLKID_MALI>;
+		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
+
+&clkc_AO {
+	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
+};
+
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+
+	map1 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&saradc {
+	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+	clock-indices = <0 1>;
+	clock-output-names = "vbig", "vlittle";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+};
+
+&usb {
+	compatible = "amlogic,meson-gxm-usb-ctrl";
+
+	phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2";
+	phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>;
+};
+
+&vdec {
+	compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
new file mode 100644
index 000000000..514a6dd4b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-function {
+			label = "Function";
+			linux,code = <KEY_FN>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-white {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vsys_3v3: regulator-vsys_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "KHADAS-VIM3";
+		audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-7 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
+	pinctrl-names = "default";
+
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	gpio_expander: gpio-controller@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		vcc-supply = <&vcc_3v3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	linux,rc-map-name = "rc-khadas";
+};
+
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vddao_1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vsys_3v3>;
+	vqmmc-supply = <&vsys_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+/*
+ * EMMC_D4, EMMC_D5, EMMC_D6 and EMMC_D7 pins are shared between SPI NOR CS
+ * and eMMC Data 4 to 7 pins.
+ * Replace emmc_data_8b_pins to emmc_data_4b_pins from sd_emmc_c pinctrl-0,
+ * and change bus-width to 4 then spifc can be enabled.
+ */
+&spifc {
+	status = "disabled";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q128: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb3_pcie_phy {
+	phy-supply = <&usb_pwr>;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
new file mode 100644
index 000000000..8ffbcb2b1
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-s4.dtsi"
+
+/ {
+	model = "Amlogic Meson S4 AQ222 Development Board";
+	compatible = "amlogic,aq222", "amlogic,s4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_B;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+};
+
+&uart_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
new file mode 100644
index 000000000..f24460186
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson-s4-pwrc";
+		#power-domain-cells = <1>;
+		status = "okay";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: bus@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			periphs_pinctrl: pinctrl@4000 {
+				compatible = "amlogic,meson-s4-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@4000 {
+					reg = <0x0 0x4000 0x0 0x004c>,
+					      <0x0 0x40c0 0x0 0x0220>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 82>;
+				};
+			};
+
+			gpio_intc: interrupt-controller@4080 {
+				compatible = "amlogic,meson-s4-gpio-intc",
+					     "amlogic,meson-gpio-intc";
+				reg = <0x0 0x4080 0x0 0x20>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				amlogic,channel-interrupts =
+					<10 11 12 13 14 15 16 17 18 19 20 21>;
+			};
+
+			uart_B: serial@7a000 {
+				compatible = "amlogic,meson-s4-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+
+			reset: reset-controller@2000 {
+				compatible = "amlogic,meson-s4-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
new file mode 100644
index 000000000..9b2eb6e42
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1";
+	model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "A95XF3-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
new file mode 100644
index 000000000..6e34fd80e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "cyx,a95xf3-air", "amlogic,sm1";
+	model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "A95XF3-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
new file mode 100644
index 000000000..46a34731f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ *
+ * AC200/AC202 = S905D3
+ * AC213/AC214 = S905X3
+ *
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD Card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	/* CRC errors are observed at 50MHz */
+	max-frequency = <35000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
new file mode 100644
index 000000000..586034316
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m2-pro.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-bananapi.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-m2-pro", "amlogic,sm1";
+	model = "Banana Pi BPI-M2-PRO";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M2-PRO";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
new file mode 100644
index 000000000..f045bf851
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-bananapi.dtsi"
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "bananapi,bpi-m5", "amlogic,sm1";
+	model = "Banana Pi BPI-M5";
+
+	/* TOFIX: handle CVBS_DET on SARADC channel 0 */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "BPI-M5";
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>,
+				 <&tdmin_a>, <&tdmin_b>, <&tdmin_c>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"Lineout", "ACODEC LOLP",
+				"Lineout", "ACODEC LORP";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-8 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
+	};
+};
+
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
new file mode 100644
index 000000000..62404743e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-sw3 {
+			label = "SW3";
+			linux,code = <BTN_3>;
+			press-threshold-microvolt = <1700000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "SW1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-vddio_c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
+		gpios-states = <1>;
+
+		states = <1800000 0>,
+			 <3300000 1>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	/* USB Hub Power Enable */
+	vl_pwr_en: regulator-vl_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "VL_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"ETH_MDIO", /* GPIOZ_0 */
+		"ETH_MDC", /* GPIOZ_1 */
+		"ETH_RXCLK", /* GPIOZ_2 */
+		"ETH_RX_DV", /* GPIOZ_3 */
+		"ETH_RXD0", /* GPIOZ_4 */
+		"ETH_RXD1", /* GPIOZ_5 */
+		"ETH_RXD2", /* GPIOZ_6 */
+		"ETH_RXD3", /* GPIOZ_7 */
+		"ETH_TXCLK", /* GPIOZ_8 */
+		"ETH_TXEN", /* GPIOZ_9 */
+		"ETH_TXD0", /* GPIOZ_10 */
+		"ETH_TXD1", /* GPIOZ_11 */
+		"ETH_TXD2", /* GPIOZ_12 */
+		"ETH_TXD3", /* GPIOZ_13 */
+		"ETH_INTR", /* GPIOZ_14 */
+		"ETH_NRST", /* GPIOZ_15 */
+		/* GPIOH */
+		"HDMI_SDA", /* GPIOH_0 */
+		"HDMI_SCL", /* GPIOH_1 */
+		"HDMI_HPD", /* GPIOH_2 */
+		"HDMI_CEC", /* GPIOH_3 */
+		"VL-RST_N", /* GPIOH_4 */
+		"CON1-P36", /* GPIOH_5 */
+		"VL-PWREN", /* GPIOH_6 */
+		"WiFi_3V3_1V8", /* GPIOH_7 */
+		"TFLASH_VDD_EN", /* GPIOH_8 */
+		/* BOOT */
+		"eMMC_D0", /* BOOT_0 */
+		"eMMC_D1", /* BOOT_1 */
+		"eMMC_D2", /* BOOT_2 */
+		"eMMC_D3", /* BOOT_3 */
+		"eMMC_D4", /* BOOT_4 */
+		"eMMC_D5", /* BOOT_5 */
+		"eMMC_D6", /* BOOT_6 */
+		"eMMC_D7", /* BOOT_7 */
+		"eMMC_CLK", /* BOOT_8 */
+		"",
+		"eMMC_CMD", /* BOOT_10 */
+		"",
+		"eMMC_RST#", /* BOOT_12 */
+		"eMMC_DS", /* BOOT_13 */
+		"", "",
+		/* GPIOC */
+		"SD_D0_B", /* GPIOC_0 */
+		"SD_D1_B", /* GPIOC_1 */
+		"SD_D2_B", /* GPIOC_2 */
+		"SD_D3_B", /* GPIOC_3 */
+		"SD_CLK_B", /* GPIOC_4 */
+		"SD_CMD_B", /* GPIOC_5 */
+		"CARD_EN_DET", /* GPIOC_6 */
+		"",
+		/* GPIOA */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"CON1-P27", /* GPIOA_14 */
+		"CON1-P28", /* GPIOA_15 */
+		/* GPIOX */
+		"CON1-P16", /* GPIOX_0 */
+		"CON1-P18", /* GPIOX_1 */
+		"CON1-P22", /* GPIOX_2 */
+		"CON1-P11", /* GPIOX_3 */
+		"CON1-P13", /* GPIOX_4 */
+		"CON1-P07", /* GPIOX_5 */
+		"CON1-P33", /* GPIOX_6 */
+		"CON1-P15", /* GPIOX_7 */
+		"CON1-P19", /* GPIOX_8 */
+		"CON1-P21", /* GPIOX_9 */
+		"CON1-P24", /* GPIOX_10 */
+		"CON1-P23", /* GPIOX_11 */
+		"CON1-P08", /* GPIOX_12 */
+		"CON1-P10", /* GPIOX_13 */
+		"CON1-P29", /* GPIOX_14 */
+		"CON1-P31", /* GPIOX_15 */
+		"CON1-P26", /* GPIOX_16 */
+		"CON1-P03", /* GPIOX_17 */
+		"CON1-P05", /* GPIOX_18 */
+		"CON1-P32"; /* GPIOX_19 */
+
+	/*
+	 * WARNING: The USB Hub needs a reset signal to be turned high in
+	 * order to be detected by the USB Controller. This signal should
+	 * be handled by a USB specific power sequence to reset the Hub
+	 * when the USB bus is powered down.
+	 */
+	usb-hub-hog {
+		gpio-hog;
+		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"DEBUG TX", /* GPIOAO_0 */
+		"DEBUG RX", /* GPIOAO_1 */
+		"SYS_LED2", /* GPIOAO_2 */
+		"UPDATE_KEY", /* GPIOAO_3 */
+		"CON1-P40", /* GPIOAO_4 */
+		"IR_IN", /* GPIOAO_5 */
+		"TF_3V3N_1V8_EN", /* GPIOAO_6 */
+		"CON1-P35", /* GPIOAO_7 */
+		"CON1-P12", /* GPIOAO_8 */
+		"CON1-P37", /* GPIOAO_9 */
+		"CON1-P38", /* GPIOAO_10 */
+		"SYS_LED", /* GPIOAO_11 */
+		/* GPIOE */
+		"VDDEE_PWM", /* GPIOE_0 */
+		"VDDCPU_PWM", /* GPIOE_1 */
+		"TF_PWR_EN"; /* GPIOE_2 */
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&dc_in>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddao_1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	/* TOFIX: SD card is barely usable in SDR modes */
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&vddio_c>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	phy-supply = <&dc_in>;
+};
+
+&usb2_phy1 {
+	/* Enable the hub which is connected to this port */
+	phy-supply = <&vl_pwr_en>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
new file mode 100644
index 000000000..e6e9410d4
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "haochuangyi,h96-max", "amlogic,sm1";
+	model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "H96-MAX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
new file mode 100644
index 000000000..9c0b544e2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "khadas,vim3l", "amlogic,sm1";
+	model = "Khadas VIM3L";
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * Silergy SY8030DEC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&vsys_3v3>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		model = "G12B-KHADAS-VIM3L";
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 13", "TDM_A Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
+
+&sd_emmc_a {
+	sd-uhs-sdr50;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
new file mode 100644
index 000000000..d04768a66
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
+	model = "Hardkernel ODROID-C4";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	sound {
+		model = "ODROID-C4";
+	};
+
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb2109,2817";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+
+		/* 3.1 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb2109,817";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-odroid";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
new file mode 100644
index 000000000..846a2d6c2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+	compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+	model = "Hardkernel ODROID-HC4";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &vrtc;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		cooling-levels = <0 120 170 220>;
+		pwms = <&pwm_cd 1 40000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		led-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	/* Powers the SATA Disk 0 regulator, which is enabled when a disk load is detected */
+	p12v_0: regulator-p12v_0 {
+		compatible = "regulator-fixed";
+		regulator-name = "P12V_0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* Powers the SATA Disk 1 regulator, which is enabled when a disk load is detected */
+	p12v_1: regulator-p12v_1 {
+		compatible = "regulator-fixed";
+		regulator-name = "P12V_1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sound {
+		model = "ODROID-HC4";
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ir {
+	linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+	pinctrl-names = "default";
+
+	rtc: rtc@51 {
+		status = "okay";
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		wakeup-source;
+	};
+};
+
+&pcie {
+	status = "okay";
+	reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+	status = "disabled";
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
new file mode 100644
index 000000000..1db2327bb
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+		regulator-always-on;
+
+		gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_SOURCE>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+	};
+
+	flash_1v8: regulator-flash_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "FLASH_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vcc_1v8: regulator-vcc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+		/* FIXME: actually controlled by VDDCPU_B_EN */
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * MP8756GD Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&main_12v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_pwr_en: regulator-usb_pwr_en {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR_EN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		/* Connected to the microUSB port power enable */
+		gpio = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&gpio {
+	gpio-line-names =
+		/* GPIOZ */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOH */
+		"", "", "", "", "",
+		"PIN_36", /* GPIOH_5 */
+		"PIN_26", /* GPIOH_6 */
+		"PIN_32", /* GPIOH_7 */
+		"",
+		/* BOOT */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		/* GPIOC */
+		"", "", "", "", "", "", "", "",
+		/* GPIOA */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "",
+		"PIN_27", /* GPIOA_14 */
+		"PIN_28", /* GPIOA_15 */
+		/* GPIOX */
+		"PIN_16", /* GPIOX_0 */
+		"PIN_18", /* GPIOX_1 */
+		"PIN_22", /* GPIOX_2 */
+		"PIN_11", /* GPIOX_3 */
+		"PIN_13", /* GPIOX_4 */
+		"PIN_7",  /* GPIOX_5 */
+		"PIN_33", /* GPIOX_6 */
+		"PIN_15", /* GPIOX_7 */
+		"PIN_19", /* GPIOX_8 */
+		"PIN_21", /* GPIOX_9 */
+		"PIN_24", /* GPIOX_10 */
+		"PIN_23", /* GPIOX_11 */
+		"PIN_8",  /* GPIOX_12 */
+		"PIN_10", /* GPIOX_13 */
+		"PIN_29", /* GPIOX_14 */
+		"PIN_31", /* GPIOX_15 */
+		"PIN_12", /* GPIOX_16 */
+		"PIN_3",  /* GPIOX_17 */
+		"PIN_5",  /* GPIOX_18 */
+		"PIN_35"; /* GPIOX_19 */
+};
+
+&gpio_ao {
+	gpio-line-names =
+		/* GPIOAO */
+		"", "", "", "",
+		"PIN_47", /* GPIOAO_4 */
+		"", "",
+		"PIN_45", /* GPIOAO_7 */
+		"PIN_46", /* GPIOAO_8 */
+		"PIN_44", /* GPIOAO_9 */
+		"PIN_42", /* GPIOAO_10 */
+		"",
+		/* GPIOE */
+		"", "", "";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+	phy-supply = <&vcc_5v>;
+};
+
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
new file mode 100644
index 000000000..095579c55
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "seirobotics,sei610", "amlogic,sm1";
+	model = "SEI Robotics SEI610";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	mono_dac: audio-codec-0 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "U16";
+		sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+	};
+
+	dmics: audio-codec-1 {
+		#sound-dai-cells = <0>;
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+		status = "okay";
+		sound-name-prefix = "MIC";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			label = "A";
+			linux,code = <BTN_0>;
+			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOH_6 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-2 {
+			label = "B";
+			linux,code = <BTN_1>;
+			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOH_7 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-3 {
+			label = "C";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-mic-mute {
+			label = "MicMute";
+			linux,code = <SW_MUTE_DEVICE>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOE_2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		key-power {
+			label = "PowerKey";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <IRQID_GPIOAO_3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	led-controller-1 {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "sei610:blue:bt";
+			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "pwm-leds";
+
+		led-2 {
+			label = "sei610:red:power";
+			pwms = <&pwm_AO_ab 0 30518 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			active-low;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	/* Used by Tuner, RGB Led & IR Emitter LED array */
+	vddao_3v3_t: regulator-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		pwm-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SEI610";
+		audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+				 <&tdmin_a>, <&tdmin_b>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TODDR_A IN 4", "PDM Capture",
+				"TODDR_B IN 4", "PDM Capture",
+				"TODDR_C IN 4", "PDM Capture",
+				"TDMIN_A IN 0", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TDMIN_B IN 0", "TDM_A Capture",
+				"TDMIN_B IN 3", "TDM_A Loopback",
+				"TDMIN_A IN 1", "TDM_B Capture",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 1", "TDM_B Capture",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* internal speaker interface */
+		dai-link-6 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&mono_dac>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* internal digital mics */
+		dai-link-8 {
+			sound-dai = <&pdm>;
+
+			codec {
+				sound-dai = <&dmics>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-9 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+	pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+	assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOX_18 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+/* Exposed via the on-board USB to Serial FT232RL IC */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
new file mode 100644
index 000000000..fc9b96113
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-x96max";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
new file mode 100644
index 000000000..9ea969255
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-air", "amlogic,sm1";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
new file mode 100644
index 000000000..643f94d9d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12-common.dtsi"
+#include <dt-bindings/clock/axg-audio-clkc.h>
+#include <dt-bindings/power/meson-sm1-power.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
+#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h>
+
+/ {
+	compatible = "amlogic,sm1";
+
+	tdmif_a: audio-controller-0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller-1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller-2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <770000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <780000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <790000>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <810000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-1908000000 {
+			opp-hz = /bits/ 64 <1908000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	audio: bus@60000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x60000 0x0 0x1000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>;
+
+		clkc_audio: clock-controller@0 {
+			status = "disabled";
+			compatible = "amlogic,sm1-audio-clkc";
+			reg = <0x0 0x0 0x0 0xb4>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			clocks = <&clkc CLKID_AUDIO>,
+				 <&clkc CLKID_MPLL0>,
+				 <&clkc CLKID_MPLL1>,
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_MPLL3>,
+				 <&clkc CLKID_HIFI_PLL>,
+				 <&clkc CLKID_FCLK_DIV3>,
+				 <&clkc CLKID_FCLK_DIV4>,
+				 <&clkc CLKID_FCLK_DIV5>;
+			clock-names = "pclk",
+				      "mst_in0",
+				      "mst_in1",
+				      "mst_in2",
+				      "mst_in3",
+				      "mst_in4",
+				      "mst_in5",
+				      "mst_in6",
+				      "mst_in7";
+
+			resets = <&reset RESET_AUDIO>;
+		};
+
+		toddr_a: audio-controller@100 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x100 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_A";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+			resets = <&arb AXG_ARB_TODDR_A>,
+				 <&clkc_audio AUD_RESET_TODDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <8192>;
+			status = "disabled";
+		};
+
+		toddr_b: audio-controller@140 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x140 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_B";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+			resets = <&arb AXG_ARB_TODDR_B>,
+				 <&clkc_audio AUD_RESET_TODDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		toddr_c: audio-controller@180 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x180 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_C";
+			interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+			resets = <&arb AXG_ARB_TODDR_C>,
+				 <&clkc_audio AUD_RESET_TODDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_a: audio-controller@1c0 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x1c0 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_A";
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+			resets = <&arb AXG_ARB_FRDDR_A>,
+				 <&clkc_audio AUD_RESET_FRDDR_A>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
+			status = "disabled";
+		};
+
+		frddr_b: audio-controller@200 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x200 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_B";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+			resets = <&arb AXG_ARB_FRDDR_B>,
+				 <&clkc_audio AUD_RESET_FRDDR_B>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_c: audio-controller@240 {
+			compatible = "amlogic,sm1-frddr",
+				     "amlogic,axg-frddr";
+			reg = <0x0 0x240 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_C";
+			interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+			resets = <&arb AXG_ARB_FRDDR_C>,
+				 <&clkc_audio AUD_RESET_FRDDR_C>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		arb: reset-controller@280 {
+			status = "disabled";
+			compatible = "amlogic,meson-sm1-audio-arb";
+			reg = <0x0 0x280 0x0 0x4>;
+			#reset-cells = <1>;
+			clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+		};
+
+		tdmin_a: audio-controller@300 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x300 0x0 0x40>;
+			sound-name-prefix = "TDMIN_A";
+			resets = <&clkc_audio AUD_RESET_TDMIN_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_b: audio-controller@340 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x340 0x0 0x40>;
+			sound-name-prefix = "TDMIN_B";
+			resets = <&clkc_audio AUD_RESET_TDMIN_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_c: audio-controller@380 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x380 0x0 0x40>;
+			sound-name-prefix = "TDMIN_C";
+			resets = <&clkc_audio AUD_RESET_TDMIN_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmin_lb: audio-controller@3c0 {
+			compatible = "amlogic,sm1-tdmin",
+				     "amlogic,axg-tdmin";
+			reg = <0x0 0x3c0 0x0 0x40>;
+			sound-name-prefix = "TDMIN_LB";
+			resets = <&clkc_audio AUD_RESET_TDMIN_LB>;
+			clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		spdifin: audio-controller@400 {
+			compatible = "amlogic,g12a-spdifin",
+				     "amlogic,axg-spdifin";
+			reg = <0x0 0x400 0x0 0x30>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFIN";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+			<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+			clock-names = "pclk", "refclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFIN>;
+			status = "disabled";
+		};
+
+		spdifout_a: audio-controller@480 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x480 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT_A";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+			<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
+			status = "disabled";
+		};
+
+		tdmout_a: audio-controller@500 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x500 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_A";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_A>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_b: audio-controller@540 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x540 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_B";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_B>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		tdmout_c: audio-controller@580 {
+			compatible = "amlogic,sm1-tdmout";
+			reg = <0x0 0x580 0x0 0x40>;
+			sound-name-prefix = "TDMOUT_C";
+			resets = <&clkc_audio AUD_RESET_TDMOUT_C>;
+			clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+				 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+			clock-names = "pclk", "sclk", "sclk_sel",
+				      "lrclk", "lrclk_sel";
+			status = "disabled";
+		};
+
+		toacodec: audio-controller@740 {
+			compatible = "amlogic,sm1-toacodec",
+				     "amlogic,g12a-toacodec";
+			reg = <0x0 0x740 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOACODEC";
+			resets = <&clkc_audio AUD_RESET_TOACODEC>;
+			status = "disabled";
+		};
+
+		tohdmitx: audio-controller@744 {
+			compatible = "amlogic,sm1-tohdmitx",
+				     "amlogic,g12a-tohdmitx";
+			reg = <0x0 0x744 0x0 0x4>;
+			#sound-dai-cells = <1>;
+			sound-name-prefix = "TOHDMITX";
+			resets = <&clkc_audio AUD_RESET_TOHDMITX>;
+			status = "disabled";
+		};
+
+		toddr_d: audio-controller@840 {
+			compatible = "amlogic,sm1-toddr",
+				     "amlogic,axg-toddr";
+			reg = <0x0 0x840 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "TODDR_D";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_TODDR_D>;
+			resets = <&arb AXG_ARB_TODDR_D>,
+				 <&clkc_audio AUD_RESET_TODDR_D>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+
+		frddr_d: audio-controller@880 {
+			 compatible = "amlogic,sm1-frddr",
+				      "amlogic,axg-frddr";
+			reg = <0x0 0x880 0x0 0x2c>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "FRDDR_D";
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_FRDDR_D>;
+			resets = <&arb AXG_ARB_FRDDR_D>,
+				 <&clkc_audio AUD_RESET_FRDDR_D>;
+			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
+			status = "disabled";
+		};
+	};
+
+	pdm: audio-controller@61000 {
+		compatible = "amlogic,sm1-pdm",
+			     "amlogic,axg-pdm";
+		reg = <0x0 0x61000 0x0 0x34>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "PDM";
+		clocks = <&clkc_audio AUD_CLKID_PDM>,
+			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
+			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
+		status = "disabled";
+	};
+};
+
+&cecb_AO {
+	compatible = "amlogic,meson-sm1-ao-cec";
+};
+
+&clk_msr {
+	compatible = "amlogic,meson-sm1-clk-measure";
+};
+
+
+&clkc {
+	compatible = "amlogic,sm1-clkc";
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_passive>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&ethmac {
+	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson-sm1-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+};
+
+&pcie {
+	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
+};
+
+&pmu {
+	compatible = "amlogic,sm1-ddr-pmu";
+};
+
+&pwrc {
+	compatible = "amlogic,meson-sm1-pwrc";
+};
+
+&simplefb_cvbs {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&simplefb_hdmi {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&vdec {
+	compatible = "amlogic,sm1-vdec";
+};
+
+&vpu {
+	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
+};
+
+&usb {
+	power-domains = <&pwrc PWRC_SM1_USB_ID>;
+};
+
+&npu {
+	power-domains = <&pwrc PWRC_SM1_NNA_ID>;
+};
diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile
new file mode 100644
index 000000000..55b5cdca1
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
new file mode 100644
index 000000000..2e8069002
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+	model = "APM X-Gene Merlin board";
+	compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x0 0x1>;
+		};
+	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&sgenet0 {
+	status = "okay";
+};
+
+&xgenet1 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&i2c4 {
+	rtc68: rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		status = "okay";
+	};
+};
+
+&mdio {
+	sgenet0phy: phy@0 {
+		reg = <0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
new file mode 100644
index 000000000..033e10e12
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) Mustang Board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm.dtsi"
+
+/ {
+	model = "APM X-Gene Mustang board";
+	compatible = "apm,mustang", "apm,xgene-storm";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x5 0x1>;
+		};
+	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+};
+
+&pcie0clk {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&menet {
+	status = "okay";
+};
+
+&sgenet0 {
+	status = "okay";
+};
+
+&sgenet1 {
+	status = "okay";
+};
+
+&xgenet {
+	status = "okay";
+	rxlos-gpios = <&sbgpio 12 1>;
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&mdio {
+	menet0phy: phy@3 {
+		reg = <0x3>;
+	};
+	sgenet0phy: phy@4 {
+		reg = <0x4>;
+	};
+	sgenet1phy: phy@5 {
+		reg = <0x5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
new file mode 100644
index 000000000..377660d70
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ */
+
+/ {
+	compatible = "apm,xgene-shadowcat";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+			#clock-cells = <1>;
+			clocks = <&pmd0clk 0>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+			#clock-cells = <1>;
+			clocks = <&pmd1clk 0>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+			#clock-cells = <1>;
+			clocks = <&pmd2clk 0>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,strega";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+			#clock-cells = <1>;
+			clocks = <&pmd3clk 0>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@78090000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+		ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
+		      <0x0 0x780a0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780c0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780e0000 0x0 0x20000>;	/* GIC VCPU */
+		v2m0: v2m@0 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x0 0x0 0x1000>;
+		};
+		v2m1: v2m@10000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x10000 0x0 0x1000>;
+		};
+		v2m2: v2m@20000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x20000 0x0 0x1000>;
+		};
+		v2m3: v2m@30000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x30000 0x0 0x1000>;
+		};
+		v2m4: v2m@40000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x40000 0x0 0x1000>;
+		};
+		v2m5: v2m@50000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x50000 0x0 0x1000>;
+		};
+		v2m6: v2m@60000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x60000 0x0 0x1000>;
+		};
+		v2m7: v2m@70000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x70000 0x0 0x1000>;
+		};
+		v2m8: v2m@80000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x80000 0x0 0x1000>;
+		};
+		v2m9: v2m@90000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x90000 0x0 0x1000>;
+		};
+		v2m10: v2m@a0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xa0000 0x0 0x1000>;
+		};
+		v2m11: v2m@b0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xb0000 0x0 0x1000>;
+		};
+		v2m12: v2m@c0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xc0000 0x0 0x1000>;
+		};
+		v2m13: v2m@d0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xd0000 0x0 0x1000>;
+		};
+		v2m14: v2m@e0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xe0000 0x0 0x1000>;
+		};
+		v2m15: v2m@f0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xf0000 0x0 0x1000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pmdpll: pmdpll@170000f0 {
+				compatible = "apm,xgene-pcppll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x170000f0 0x0 0x10>;
+				clock-output-names = "pmdpll";
+			};
+
+			pmd0clk: pmd0clk@7e200200 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200200 0x0 0x10>;
+				clock-output-names = "pmd0clk";
+			};
+
+			pmd1clk: pmd1clk@7e200210 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200210 0x0 0x10>;
+				clock-output-names = "pmd1clk";
+			};
+
+			pmd2clk: pmd2clk@7e200220 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200220 0x0 0x10>;
+				clock-output-names = "pmd2clk";
+			};
+
+			pmd3clk: pmd3clk@7e200230 {
+				compatible = "apm,xgene-pmd-clock";
+				#clock-cells = <1>;
+				clocks = <&pmdpll 0>;
+				reg = <0x0 0x7e200230 0x0 0x10>;
+				clock-output-names = "pmd3clk";
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sbapbclk: sbapbclk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ahbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x10>;
+				divider-width = <0x2>;
+				divider-shift = <0x0>;
+				clock-output-names = "sbapbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			pcie1clk: pcie1clk@1f2cc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2cc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie1clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			xge1clk: xge1clk@1f62c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f62c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge1clk";
+			};
+
+			rngpkaclk: rngpkaclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x10>;
+				enable-offset = <0x10>;
+				enable-mask = <0x10>;
+				clock-output-names = "rngpkaclk";
+			};
+
+			i2c4clk: i2c4clk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&sbapbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x40>;
+				enable-offset = <0x8>;
+				enable-mask = <0x40>;
+				clock-output-names = "i2c4clk";
+			};
+		};
+
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+
+			edacl3@7e600000 {
+				compatible = "apm,xgene-edac-l3-v2";
+				reg = <0x0 0x7e600000 0x0 0x1000>;
+			};
+
+			edacsoc@7e930000 {
+				compatible = "apm,xgene-edac-soc";
+				reg = <0x0 0x7e930000 0x0 0x1000>;
+			};
+		};
+
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0x8000>;
+			#mbox-cells = <1>;
+			interrupts =   <0x0 0x0 0x4
+					0x0 0x1 0x4
+					0x0 0x2 0x4
+					0x0 0x3 0x4
+					0x0 0x4 0x4
+					0x0 0x5 0x4
+					0x0 0x6 0x4
+					0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
+		serial0: serial@10600000 {
+			compatible = "ns16550";
+			reg = <0 0x10600000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x5d 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		pcie0: pcie@1f2b0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+				0xc0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x20000000 0xc1 0x20000000 0x00 0x20000000   /* mem */
+				  0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x4>;
+			dma-coherent;
+			clocks = <&pcie0clk 0>;
+			msi-parent = <&v2m0>;
+		};
+
+		pcie1: pcie@1f2c0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2c0000 0x0 0x00010000   /* Controller registers */
+				0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x20000000 0xa1 0x20000000 0x00 0x20000000   /* mem */
+				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x4>;
+			dma-coherent;
+			clocks = <&pcie1clk 0>;
+			msi-parent = <&v2m0>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci-v2";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f200000 0x0 0x1000>,
+			      <0x0 0x1f20d000 0x0 0x1000>,
+			      <0x0 0x1f20e000 0x0 0x1000>;
+			interrupts = <0x0 0x5a 0x4>;
+			dma-coherent;
+		};
+
+		sata2: sata@1a200000 {
+			compatible = "apm,xgene-ahci-v2";
+			reg = <0x0 0x1a200000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>;
+			interrupts = <0x0 0x5b 0x4>;
+			dma-coherent;
+		};
+
+		sata3: sata@1a400000 {
+			compatible = "apm,xgene-ahci-v2";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>;
+			interrupts = <0x0 0x5c 0x4>;
+			dma-coherent;
+		};
+
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio@1f63c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1f63c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		sbgpio: gpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <0x0 0x28 0x1>,
+				     <0x0 0x29 0x1>,
+				     <0x0 0x2a 0x1>,
+				     <0x0 0x2b 0x1>,
+				     <0x0 0x2c 0x1>,
+				     <0x0 0x2d 0x1>,
+				     <0x0 0x2e 0x1>,
+				     <0x0 0x2f 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			apm,nr-gpios = <22>;
+			apm,nr-irqs = <8>;
+			apm,irq-start = <8>;
+		};
+
+		mdio: mdio@1f610000 {
+			compatible = "apm,xgene-mdio-xfi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1f610000 0x0 0xd100>;
+			clocks = <&xge0clk 0>;
+		};
+
+		sgenet0: ethernet@1f610000 {
+			compatible = "apm,xgene2-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xd100>,
+			      <0x0 0x20000000 0x0 0x20000>;
+			interrupts = <0 96 4>,
+				     <0 97 4>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			local-mac-address = [00 01 73 00 00 01];
+			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
+		};
+
+		xgenet1: ethernet@1f620000 {
+			compatible = "apm,xgene2-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f620000 0x0 0x10000>,
+			      <0x0 0x1f600000 0x0 0xd100>,
+			      <0x0 0x20000000 0x0 0x220000>;
+			interrupts = <0 108 4>,
+				     <0 109 4>,
+				     <0 110 4>,
+				     <0 111 4>,
+				     <0 112 4>,
+				     <0 113 4>,
+				     <0 114 4>,
+				     <0 115 4>;
+			channel = <12>;
+			port-id = <1>;
+			dma-coherent;
+			clocks = <&xge1clk 0>;
+			local-mac-address = [00 01 73 00 00 02];
+			phy-connection-type = "xgmii";
+		};
+
+		rng: rng@10520000 {
+			compatible = "apm,xgene-rng";
+			reg = <0x0 0x10520000 0x0 0x100>;
+			interrupts = <0x0 0x41 0x4>;
+			clocks = <&rngpkaclk 0>;
+		};
+
+		i2c1: i2c@10511000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10511000 0x0 0x1000>;
+			interrupts = <0 0x45 0x4>;
+			#clock-cells = <1>;
+			clocks = <&sbapbclk 0>;
+			bus_num = <1>;
+		};
+
+		i2c4: i2c@10640000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10640000 0x0 0x1000>;
+			interrupts = <0 0x3a 0x4>;
+			clocks = <&i2c4clk 0>;
+			bus_num = <4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
new file mode 100644
index 000000000..efa79209f
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -0,0 +1,1102 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for AppliedMicro (APM) X-Gene Storm SOC
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ */
+
+/ {
+	compatible = "apm,xgene-storm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,potenza";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@78010000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
+		      <0x0 0x78020000 0x0 0x1000>,	/* GIC CPU */
+		      <0x0 0x78040000 0x0 0x2000>,	/* GIC VCPU Control */
+		      <0x0 0x78060000 0x0 0x2000>;	/* GIC VCPU */
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff08>,	/* Secure Phys IRQ */
+			     <1 13 0xff08>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff08>,	/* Virt IRQ */
+			     <1 15 0xff08>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	pmu {
+		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x400 0x0>;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pcppll: pcppll@17000100 {
+				compatible = "apm,xgene-pcppll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "pcppll";
+				reg = <0x0 0x17000100 0x0 0x1000>;
+				clock-output-names = "pcppll";
+				type = <0>;
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "socpll";
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+				type = <1>;
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-names = "socplldiv2";
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
+			ethclk: ethclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "ethclk";
+				reg = <0x0 0x17000000 0x0 0x1000>;
+				reg-names = "div-reg";
+				divider-offset = <0x238>;
+				divider-width = <0x9>;
+				divider-shift = <0x0>;
+				clock-output-names = "ethclk";
+			};
+
+			menetclk: menetclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ethclk 0>;
+				reg = <0x0 0x1702c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "menetclk";
+			};
+
+			sge0clk: sge0clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0xa>;
+				enable-mask = <0xf>;
+				clock-output-names = "sge0clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			xge1clk: xge1clk@1f62c000 {
+				compatible = "apm,xgene-device-clock";
+				status = "disabled";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f62c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0x3>;
+				clock-output-names = "xge1clk";
+			};
+
+			sataphy1clk: sataphy1clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy1clk";
+				status = "disabled";
+				csr-offset = <0x4>;
+				csr-mask = <0x00>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy2clk: sataphy1clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy2clk";
+				status = "okay";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy3clk: sataphy1clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy3clk";
+				status = "okay";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sata01clk: sata01clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata01clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata23clk: sata23clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata23clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata45clk: sata45clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata45clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			rtcclk: rtcclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x2>;
+				enable-offset = <0x10>;
+				enable-mask = <0x2>;
+				clock-output-names = "rtcclk";
+			};
+
+			rngpkaclk: rngpkaclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x10>;
+				enable-offset = <0x10>;
+				enable-mask = <0x10>;
+				clock-output-names = "rngpkaclk";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			pcie1clk: pcie1clk@1f2cc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2cc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie1clk";
+			};
+
+			pcie2clk: pcie2clk@1f2dc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2dc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie2clk";
+			};
+
+			pcie3clk: pcie3clk@1f50c000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f50c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie3clk";
+			};
+
+			pcie4clk: pcie4clk@1f51c000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f51c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie4clk";
+			};
+
+			dmaclk: dmaclk@1f27c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f27c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "dmaclk";
+			};
+		};
+
+		msi: msi@79000000 {
+			compatible = "apm,xgene1-msi";
+			msi-controller;
+			reg = <0x00 0x79000000 0x0 0x900000>;
+			interrupts = <  0x0 0x10 0x4
+					0x0 0x11 0x4
+					0x0 0x12 0x4
+					0x0 0x13 0x4
+					0x0 0x14 0x4
+					0x0 0x15 0x4
+					0x0 0x16 0x4
+					0x0 0x17 0x4
+					0x0 0x18 0x4
+					0x0 0x19 0x4
+					0x0 0x1a 0x4
+					0x0 0x1b 0x4
+					0x0 0x1c 0x4
+					0x0 0x1d 0x4
+					0x0 0x1e 0x4
+					0x0 0x1f 0x4>;
+		};
+
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		rb: rb@7e000000 {
+			compatible = "apm,xgene-rb", "syscon";
+			reg = <0x0 0x7e000000 0x0 0x10>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			regmap-rb = <&rb>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+
+			edacl3@7e600000 {
+				compatible = "apm,xgene-edac-l3";
+				reg = <0x0 0x7e600000 0x0 0x1000>;
+			};
+
+			edacsoc@7e930000 {
+				compatible = "apm,xgene-edac-soc-v1";
+				reg = <0x0 0x7e930000 0x0 0x1000>;
+			};
+		};
+
+		pmu: pmu@78810000 {
+			compatible = "apm,xgene-pmu-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			reg = <0x0 0x78810000 0x0 0x1000>;
+			interrupts = <0x0 0x22 0x4>;
+
+			pmul3c@7e610000 {
+				compatible = "apm,xgene-pmu-l3c";
+				reg = <0x0 0x7e610000 0x0 0x1000>;
+			};
+
+			pmuiob@7e940000 {
+				compatible = "apm,xgene-pmu-iob";
+				reg = <0x0 0x7e940000 0x0 0x1000>;
+			};
+
+			pmucmcb@7e710000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e710000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmcb@7e730000 {
+				compatible = "apm,xgene-pmu-mcb";
+				reg = <0x0 0x7e730000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e810000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e810000 0x0 0x1000>;
+				enable-bit-index = <0>;
+			};
+
+			pmucmc@7e850000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e850000 0x0 0x1000>;
+				enable-bit-index = <1>;
+			};
+
+			pmucmc@7e890000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e890000 0x0 0x1000>;
+				enable-bit-index = <2>;
+			};
+
+			pmucmc@7e8d0000 {
+				compatible = "apm,xgene-pmu-mc";
+				reg = <0x0 0x7e8d0000 0x0 0x1000>;
+				enable-bit-index = <3>;
+			};
+		};
+
+		pcie0: pcie@1f2b0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+				0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xf0 0x00000000 0xf0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x4>;
+			dma-coherent;
+			clocks = <&pcie0clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie1: pcie@1f2c0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2c0000 0x0 0x00010000   /* Controller registers */
+				0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xd0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0xd1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xd8 0x00000000 0xd8 0x00000000 0x08 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x4>;
+			dma-coherent;
+			clocks = <&pcie1clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie2: pcie@1f2d0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg =  < 0x00 0x1f2d0000 0x0 0x00010000   /* Controller registers */
+				 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0x90 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0x91 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0x94 0x00000000 0x94 0x00000000 0x04 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x4>;
+			dma-coherent;
+			clocks = <&pcie2clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie3: pcie@1f500000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f500000 0x0 0x00010000   /* Controller registers */
+				0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0xa1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x4>;
+			dma-coherent;
+			clocks = <&pcie3clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		pcie4: pcie@1f510000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f510000 0x0 0x00010000   /* Controller registers */
+				0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x00 0x80000000 0xc1 0x80000000 0x00 0x80000000   /* mem */
+				  0x43000000 0xc8 0x00000000 0xc8 0x00000000 0x08 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x4
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x4>;
+			dma-coherent;
+			clocks = <&pcie4clk 0>;
+			msi-parent = <&msi>;
+		};
+
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0xa000>;
+			#mbox-cells = <1>;
+			interrupts =    <0x0 0x0 0x4>,
+					<0x0 0x1 0x4>,
+					<0x0 0x2 0x4>,
+					<0x0 0x3 0x4>,
+					<0x0 0x4 0x4>,
+					<0x0 0x5 0x4>,
+					<0x0 0x6 0x4>,
+					<0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
+		hwmonslimpro {
+			compatible = "apm,xgene-slimpro-hwmon";
+			mboxes = <&mailbox 7>;
+		};
+
+		serial0: serial@1c020000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c020000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		serial1: serial@1c021000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c021000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4d 0x4>;
+		};
+
+		serial2: serial@1c022000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c022000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4e 0x4>;
+		};
+
+		serial3: serial@1c023000 {
+			status = "disabled";
+			compatible = "ns16550a";
+			reg = <0 0x1c023000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4f 0x4>;
+		};
+
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio0@1701c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1701c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		i2c0: i2c@10512000 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10512000 0x0 0x1000>;
+			interrupts = <0 0x44 0x4>;
+			#clock-cells = <1>;
+			clocks = <&ahbclk 0>;
+			bus_num = <0>;
+		};
+
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy1clk 0>;
+			status = "disabled";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy2clk 0>;
+			status = "okay";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <1 10 10 2 10 10>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy3clk 0>;
+			status = "okay";
+			apm,tx-boost-gain = <31 31 31 31 31 31>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>,
+			      <0x0 0x1f217000 0x0 0x1000>;
+			interrupts = <0x0 0x86 0x4>;
+			dma-coherent;
+			status = "disabled";
+			clocks = <&sata01clk 0>;
+			phys = <&phy1 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
+			status = "okay";
+			clocks = <&sata23clk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
+			status = "okay";
+			clocks = <&sata45clk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
+
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x89 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		usb1: usb@19800000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x19800000 0x0 0x100000>;
+			interrupts = <0x0 0x8a 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		sbgpio: gpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = 	<0x0 0x28 0x1>,
+					<0x0 0x29 0x1>,
+					<0x0 0x2a 0x1>,
+					<0x0 0x2b 0x1>,
+					<0x0 0x2c 0x1>,
+					<0x0 0x2d 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		rtc: rtc@10510000 {
+			compatible = "apm,xgene-rtc";
+			reg = <0x0 0x10510000 0x0 0x400>;
+			interrupts = <0x0 0x46 0x4>;
+			#clock-cells = <1>;
+			clocks = <&rtcclk 0>;
+		};
+
+		mdio: mdio@17020000 {
+			compatible = "apm,xgene-mdio-rgmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x17020000 0x0 0xd100>;
+			clocks = <&menetclk 0>;
+		};
+
+		menet: ethernet@17020000 {
+			compatible = "apm,xgene-enet";
+			status = "disabled";
+			reg = <0x0 0x17020000 0x0 0xd100>,
+			      <0x0 0x17030000 0x0 0xc300>,
+			      <0x0 0x10000000 0x0 0x200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x3c 0x4>;
+			dma-coherent;
+			clocks = <&menetclk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "rgmii";
+			phy-handle = <&menetphy>,<&menet0phy>;
+			mdio {
+				compatible = "apm,xgene-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				menetphy: menetphy@3 {
+					compatible = "ethernet-phy-id001c.c915";
+					reg = <0x3>;
+				};
+
+			};
+		};
+
+		sgenet0: ethernet@1f210000 {
+			compatible = "apm,xgene1-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f210000 0x0 0xd100>,
+			      <0x0 0x1f200000 0x0 0xc300>,
+			      <0x0 0x1b000000 0x0 0x200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0xa0 0x4>,
+				     <0x0 0xa1 0x4>;
+			dma-coherent;
+			clocks = <&sge0clk 0>;
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet0phy>;
+		};
+
+		sgenet1: ethernet@1f210030 {
+			compatible = "apm,xgene1-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f210030 0x0 0xd100>,
+			      <0x0 0x1f200000 0x0 0xc300>,
+			      <0x0 0x1b000000 0x0 0x8000>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0xac 0x4>,
+				     <0x0 0xad 0x4>;
+			port-id = <1>;
+			dma-coherent;
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "sgmii";
+			phy-handle = <&sgenet1phy>;
+		};
+
+		xgenet: ethernet@1f610000 {
+			compatible = "apm,xgene1-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xc300>,
+			      <0x0 0x18000000 0x0 0x200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x60 0x4>,
+				     <0x0 0x61 0x4>,
+				     <0x0 0x62 0x4>,
+				     <0x0 0x63 0x4>,
+				     <0x0 0x64 0x4>,
+				     <0x0 0x65 0x4>,
+				     <0x0 0x66 0x4>,
+				     <0x0 0x67 0x4>;
+			channel = <0>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "xgmii";
+		};
+
+		xgenet1: ethernet@1f620000 {
+			compatible = "apm,xgene1-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f620000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0xc300>,
+			      <0x0 0x18000000 0x0 0x8000>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x6c 0x4>,
+				     <0x0 0x6d 0x4>;
+			port-id = <1>;
+			dma-coherent;
+			clocks = <&xge1clk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "xgmii";
+		};
+
+		rng: rng@10520000 {
+			compatible = "apm,xgene-rng";
+			reg = <0x0 0x10520000 0x0 0x100>;
+			interrupts = <0x0 0x41 0x4>;
+			clocks = <&rngpkaclk 0>;
+		};
+
+		dma: dma@1f270000 {
+			compatible = "apm,xgene-storm-dma";
+			device_type = "dma";
+			reg = <0x0 0x1f270000 0x0 0x10000>,
+			      <0x0 0x1f200000 0x0 0x10000>,
+			      <0x0 0x1b000000 0x0 0x400000>,
+			      <0x0 0x1054a000 0x0 0x100>;
+			interrupts = <0x0 0x82 0x4>,
+				     <0x0 0xb8 0x4>,
+				     <0x0 0xb9 0x4>,
+				     <0x0 0xba 0x4>,
+				     <0x0 0xbb 0x4>;
+			dma-coherent;
+			clocks = <&dmaclk 0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
new file mode 100644
index 000000000..aec5e29cd
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j456.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8103-j457.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j314s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j314c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/multi-die-cpp.h b/arch/arm64/boot/dts/apple/multi-die-cpp.h
new file mode 100644
index 000000000..39e8953bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/multi-die-cpp.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT
+ *
+ * C preprocessor macros for t600x multi die support.
+ */
+
+#ifndef __DTS_APPLE_MULTI_DIE_CPP_H
+#define __DTS_APPLE_MULTI_DIE_CPP_H
+
+#ifndef __stringify
+#define __stringify_1(x...)     #x
+#define __stringify(x...)       __stringify_1(x)
+#endif
+
+#ifndef __concat
+#define __concat_1(x, y...)     x ## y
+#define __concat(x, y...)       __concat_1(x, y)
+#endif
+
+#define DIE_NODE(a) __concat(a, DIE)
+#define DIE_LABEL(a) __stringify(__concat(a, DIE))
+
+#endif /* !__DTS_APPLE_MULTI_DIE_CPP_H */
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
new file mode 100644
index 000000000..c9e192848
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Pro, 2021)
+ *
+ * target-type: J314s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
new file mode 100644
index 000000000..ff1803ce2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Pro, 2021)
+ *
+ * target-type: J316s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6000.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000.dtsi b/arch/arm64/boot/dts/apple/t6000.dtsi
new file mode 100644
index 000000000..89c3b211b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6000.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6000 "M1 Pro" SoC
+ *
+ * Other names: H13J, "Jade Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6001, so include it and disable the missing parts */
+
+#include "t6001.dtsi"
+
+/ {
+	compatible = "apple,t6000", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
new file mode 100644
index 000000000..1761d15b9
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M1 Max, 2021)
+ *
+ * target-type: J314c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
new file mode 100644
index 000000000..750e9beef
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M1 Max, 2021)
+ *
+ * target-type: J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j314-j316.dtsi"
+
+/ {
+	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
new file mode 100644
index 000000000..62ea437b5
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Max, 2022)
+ *
+ * target-type: J375c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6001.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Max, 2022)";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001.dtsi b/arch/arm64/boot/dts/apple/t6001.dtsi
new file mode 100644
index 000000000..620b17e40
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6001.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6001 "M1 Max" SoC
+ *
+ * Other names: H13J, "Jade"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6001", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-gpio-pins.dtsi"
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
new file mode 100644
index 000000000..3365429bd
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M1 Ultra, 2022)
+ *
+ * target-type: J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6002.dtsi"
+#include "t600x-j375.dtsi"
+
+/ {
+	compatible = "apple,j375d", "apple,t6002", "apple,arm-platform";
+	model = "Apple Mac Studio (M1 Ultra, 2022)";
+};
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* delete unused always-on power-domains on die 1 */
+
+/delete-node/ &ps_atc2_usb_aon_die1;
+/delete-node/ &ps_atc2_usb_die1;
+
+/delete-node/ &ps_atc3_usb_aon_die1;
+/delete-node/ &ps_atc3_usb_die1;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
diff --git a/arch/arm64/boot/dts/apple/t6002.dtsi b/arch/arm64/boot/dts/apple/t6002.dtsi
new file mode 100644
index 000000000..a963a5011
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6002.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6002 "M1 Ultra" SoC
+ *
+ * Other names: H13J, "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+#include "multi-die-cpp.h"
+
+#include "t600x-common.dtsi"
+
+/ {
+	compatible = "apple,t6002", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x2 0x0 0x4 0x0>,
+			 <0x5 0x80000000 0x5 0x80000000 0x1 0x80000000>,
+			 <0x7 0x0 0x7 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x2 0x0 0x22 0x0 0x4 0x0>,
+			 <0x7 0x0 0x27 0x0 0xf 0x80000000>;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t600x-die0.dtsi"
+	#include "t600x-dieX.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+#include "t600x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t600x-dieX.dtsi"
+	#include "t600x-nvme.dtsi"
+};
+
+#include "t600x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01
+				&cpu_e10 &cpu_e11>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6002, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-common.dtsi b/arch/arm64/boot/dts/apple/t600x-common.dtsi
new file mode 100644
index 000000000..fa8ead699
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-common.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Common Apple T6000 / T6001 / T6002 "M1 Pro/Max/Ultra" SoC
+ *
+ * Other names: H13J, "Jade Chop", "Jade", "Jade 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&icestorm_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&firestorm_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	icestorm_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <23000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <29000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <40000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	firestorm_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <19000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1524000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1980000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2448000000>;
+			opp-level = <9>;
+			clock-latency-ns = <49000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2676000000>;
+			opp-level = <10>;
+			clock-latency-ns = <53000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2904000000>;
+			opp-level = <11>;
+			clock-latency-ns = <56000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3036000000>;
+			opp-level = <12>;
+			clock-latency-ns = <56000>;
+		};
+		/* Not available until CPU deep sleep is implemented
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3168000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3228000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		*/
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
new file mode 100644
index 000000000..b1c875e69
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6002 "M1 Ultra" SoC and present on
+ * Apple T6000 / T6001 "M1 Pro" / "M1 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6000-nco", "apple,nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6000-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x4>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	pinctrl_smc: pinctrl@290820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x90820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 743 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 744 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 745 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 746 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 747 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 748 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wdt: watchdog@2922b0000 {
+		compatible = "apple,t6000-wdt", "apple,wdt";
+		reg = <0x2 0x922b0000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart_0: iommu@39b004000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b004000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	sio_dart_1: iommu@39b008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6000-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1119 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1120 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1121 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1122 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1123 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6000-i2c", "apple,i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1124 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x1000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1097 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6000-admac", "apple,admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1118 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart_0 2>, <&sio_dart_1 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6000-mca", "apple,mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1112 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1113 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1114 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1115 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	pcie0_dart_0: iommu@581008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x81008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1271 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@582008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x82008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1274 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_2: iommu@583008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x83008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@584008000 {
+		compatible = "apple,t6000-dart";
+		reg = <0x5 0x84008000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0: pcie@590000000 {
+		compatible = "apple,t6000-pcie", "apple,pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x90000000 0x0 0x1000000>,
+			<0x5 0x80000000 0x0 0x100000>,
+			<0x5 0x81000000 0x0 0x4000>,
+			<0x5 0x82000000 0x0 0x4000>,
+			<0x5 0x83000000 0x0 0x4000>,
+			<0x5 0x84000000 0x0 0x4000>;
+		reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1270 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1273 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1276 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1279 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1581 IRQ_TYPE_EDGE_RISING 32>;
+
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-dieX.dtsi b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
new file mode 100644
index 000000000..a32ff0c9d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-dieX.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on both dies on the Apple T6002 "M1 Ultra" and present on
+ * Apple T6000/T6001 "M1 Pro/Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6000-cluster-cpufreq", "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x4000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@28e580000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e580000 0 0xc000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@2921f0000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x921f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 16>;
+		apple,npins = <16>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 623 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 624 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 625 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 626 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 627 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 628 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 629 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@292280000 {
+		compatible = "apple,t6000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x92280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@293820000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x2 0x93820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 63>;
+		apple,npins = <63>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 567 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 568 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 569 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 570 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 571 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 572 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 573 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 427 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 428 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 429 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 430 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 431 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 432 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 433 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
new file mode 100644
index 000000000..b31f1a7a2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-gpio-pins.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(92, 1)>,
+			<APPLE_PINMUX(93, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(94, 1)>,
+			<APPLE_PINMUX(95, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(96, 1)>,
+			<APPLE_PINMUX(97, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(98, 1)>,
+			<APPLE_PINMUX(99, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(8, 1)>,
+			<APPLE_PINMUX(9, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(100, 1)>,
+			<APPLE_PINMUX(101, 1)>;
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
new file mode 100644
index 000000000..2e471dfe4
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2021)
+ *
+ * This file contains the parts common to J314 and J316 devices with both t6000 and t6001.
+ *
+ * target-type: J314s / J314c / J316s / J316c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm0 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&fpwm0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
new file mode 100644
index 000000000..1e5a19e49
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (2022)
+ *
+ * This file contains the parts common to J375 devices with both t6001 and t6002.
+ *
+ * target-type: J375c / J375d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C */
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+/* PCIe devices */
+&port00 {
+	/* WLAN */
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+	};
+};
+
+&port01 {
+	/* SD card reader */
+	bus-range = <2 2>;
+	sdhci0: mmc@0,0 {
+		compatible = "pci17a0,9755";
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
+		cd-inverted;
+		wp-inverted;
+	};
+};
+
+&port02 {
+	/* 10 Gbit Ethernet */
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&port03 {
+	/* USB xHCI */
+	bus-range = <4 4>;
+	status = "okay";
+};
+
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&pcie0_dart_3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t600x-nvme.dtsi b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
new file mode 100644
index 000000000..7dff738d3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T600x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@38f408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x8f408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1069 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1070 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1071 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1072 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@393c50000 {
+		compatible = "apple,t6000-sart";
+		reg = <0x3 0x93c50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@393cc0000 {
+		compatible = "apple,t6000-nvme-ans2", "apple,nvme-ans2";
+		reg = <0x3 0x93cc0000 0x0 0x40000>, <0x3 0x8f400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die */
+		interrupts = <AIC_IRQ 0 1613 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
new file mode 100644
index 000000000..0bd44753b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t600x-pmgr.dtsi
@@ -0,0 +1,2012 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T6001 "M1 Max" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_pms_bridge): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_pms)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_pcie0_ref): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie0_ref);
+	};
+
+	DIE_NODE(ps_pcie1_ref): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pcie1_ref);
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_pcie1_ref)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_pcie0_ref)>;
+	};
+
+	DIE_NODE(ps_devc0_ivdmc): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(devc0_ivdmc);
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afi): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afc): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afr): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_c0_usb31drd): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usb31drd): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usb31drd);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+	};
+
+	DIE_NODE(ps_ane_sys_cpu): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+#if DIE_NO == 0
+	/* PMP is only present on die 0 of the M1 Ultra */
+	DIE_NODE(ps_pmp): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+#endif
+
+	DIE_NODE(ps_pms_sram): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_usb): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(usb);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>, <&DIE_NODE(ps_apcie_gp)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@330 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@338 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@340 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@348 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@358 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@360 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_c0_usbctl): power-controller@368 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c0_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_c1_usbctl): power-controller@370 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(c1_usbctl);
+		power-domains = <&DIE_NODE(ps_usb)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6001 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@1d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@1e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@1f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@1f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@200 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@208 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@218 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@220 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@230 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@238 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@240 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart1): power-controller@248 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart7): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart7);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@278 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@280 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@288 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@290 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@298 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@2a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@2a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@2b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@2b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@2c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@2c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@2d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@2d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@2e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@2e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@2f0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@2f8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@300 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@308 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@310 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@318 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@320 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@328 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@350 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispdfr_fe): power-controller@378 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_fe);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_dispdfr_be): power-controller@380 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispdfr_be);
+		power-domains = <&DIE_NODE(ps_dispdfr_fe)>;
+	};
+
+	DIE_NODE(ps_mipi_dsi): power-controller@388 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mipi_dsi);
+		power-domains = <&DIE_NODE(ps_dispdfr_be)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@390 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@398 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@3a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@3b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		/*
+		 * The ADT makes ps_apcie_st[1]_sys depend on ps_ans2 instead,
+		 * but we'd rather have a single power domain for the downstream
+		 * device to depend on, so use this node as the child.
+		 * This makes more sense anyway (since ANS2 uses APCIE_ST).
+		 */
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@3c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@210 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@228 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+	};
+
+	DIE_NODE(ps_msr1): power-controller@250 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@258 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@260 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	/* Seems to be disabled on shipping hardware */
+#if 0
+	DIE_NODE(ps_ane1_sys): power-controller@268 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys);
+		power-domains = <&DIE_NODE(ps_afnc5_lw0)>;
+	};
+
+	DIE_NODE(ps_ane1_sys_cpu): power-controller@270 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane1_sys_cpu);
+		power-domains = <&DIE_NODE(ps_ane1_sys)>;
+	};
+#endif
+
+	DIE_NODE(ps_venc1_dma): power-controller@8000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@8008 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@8010 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@8018 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe4)>, <&DIE_NODE(ps_venc1_pipe5)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@8020 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc4_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@88 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@90 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@98 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_gp_usb_aon): power-controller@a8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gp_usb_aon);
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@b0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_usb): power-controller@c0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_usb);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_debug_auth): power-controller@c8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_auth);
+		apple,always-on; /* Core AON device */
+		power-domains = <&DIE_NODE(ps_debug)>;
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@d0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_usb_aon)>, <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_usb_aon)>, <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@e0 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_usb_aon)>, <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e8 {
+		compatible = "apple,t6000-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_usb_aon)>, <&DIE_NODE(ps_atc3_common)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
new file mode 100644
index 000000000..1c3e37f86
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M1, 2020)
+ *
+ * target-type: J274
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j274", "apple,t8103", "apple,arm-platform";
+	model = "Apple Mac mini (M1, 2020)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
new file mode 100644
index 000000000..56b0c67bf
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2020)
+ *
+ * target-type: J293
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M1, 2020)";
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,honshu";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,honshu";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts
new file mode 100644
index 000000000..97a4344d8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M1, 2020)
+ *
+ * target-type: J313
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
+	model = "Apple MacBook Air (M1, 2020)";
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,shikoku";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,shikoku";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
new file mode 100644
index 000000000..58c8e4378
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iMac (24-inch, 4x USB-C, M1, 2020)
+ *
+ * target-type: J456
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j456", "apple,t8103", "apple,arm-platform";
+	model = "Apple iMac (24-inch, 4x USB-C, M1, 2021)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,capri";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,capri";
+};
+
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
new file mode 100644
index 000000000..152f95fd4
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iMac (24-inch, 2x USB-C, M1, 2020)
+ *
+ * target-type: J457
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8103.dtsi"
+#include "t8103-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j457", "apple,t8103", "apple,arm-platform";
+	model = "Apple iMac (24-inch, 2x USB-C, M1, 2021)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,santorini";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,santorini";
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie0_dart_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
new file mode 100644
index 000000000..5988a4eb6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M1 Mac mini, MacBook Air/Pro, iMac 24" (M1, 2020/2021)
+ *
+ * This file contains parts common to all Apple M1 devices using the t8103.
+ *
+ * target-type: J274, J293, J313, J456, J457
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth0;
+		serial0 = &serial0;
+		serial2 = &serial2;
+		wifi0 = &wifi0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <106 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: network@0,0 {
+		compatible = "pci14e4,4425";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+	};
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
new file mode 100644
index 000000000..9645861a8
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103-pmgr.dtsi
@@ -0,0 +1,1133 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8103 "M1" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_soc_spmi1: power-controller@120 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi1";
+	};
+
+	ps_soc_spmi2: power-controller@128 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi2";
+	};
+
+	ps_gpio: power-controller@130 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@138 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@140 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_fpwm0: power-controller@148 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm0";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm1: power-controller@150 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm1";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm2: power-controller@158 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm2";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm3: power-controller@160 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm3";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_pms_fpwm4: power-controller@168 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_fpwm4";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@170 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@178 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+	};
+
+	ps_ispsens0: power-controller@180 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@188 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@190 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@198 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@1a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_devc0_ivdmc: power-controller@1b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "devc0_ivdmc";
+	};
+
+	ps_imx: power-controller@1b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+	};
+
+	ps_fpwm1: power-controller@1e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+	};
+
+	ps_fpwm2: power-controller@1e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+	};
+
+	ps_i2c0: power-controller@1f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@200 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@208 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@210 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@218 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@220 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@228 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_sio_adma: power-controller@230 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_sio>, <&ps_pms>, <&ps_audio_p>;
+	};
+
+	ps_aes: power-controller@238 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@240 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@248 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@250 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@258 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@268 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@270 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@278 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@280 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@288 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@290 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@298 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@2a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@2a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_mca0: power-controller@2b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca1: power-controller@2c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca2: power-controller@2c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca3: power-controller@2d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca4: power-controller@2d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_mca5: power-controller@2e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_audio_p>, <&ps_sio_adma>;
+	};
+
+	ps_dpa0: power-controller@2e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_spi4: power-controller@260 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_sio>, <&ps_spi_p>;
+	};
+
+	ps_dcs0: power-controller@300 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@310 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@308 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@318 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx: power-controller@340 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx: power-controller@350 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_mmx: power-controller@358 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_fe: power-controller@360 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_rmx>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_fe: power-controller@368 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_dispext_cpu0: power-controller@378 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_jpg: power-controller@3c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_msr: power-controller@3c8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_msr_ase_core: power-controller@3d0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+	};
+
+	ps_pmp: power-controller@3d8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+	};
+
+	ps_pms_sram: power-controller@3e0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+	};
+
+	ps_apcie_gp: power-controller@3e8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+	};
+
+	ps_ans2: power-controller@3f0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans2";
+	};
+
+	ps_gfx: power-controller@3f8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_dcs4: power-controller@320 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@330 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@338 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dispdfr_fe: power-controller@3a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_dispdfr_be: power-controller@3b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_isp_sys: power-controller@400 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx>;
+	};
+
+	ps_venc_sys: power-controller@408 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_avd_sys: power-controller@410 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@418 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>, <&ps_ans2>;
+	};
+
+	ps_ane_sys: power-controller@470 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+	};
+
+	ps_atc0_common: power-controller@420 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+	};
+
+	ps_atc0_pcie: power-controller@428 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@430 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@438 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@440 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@448 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+	};
+
+	ps_atc1_pcie: power-controller@450 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@458 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@460 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@468 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on; /* Locked on */
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe4>, <&ps_venc_pipe5>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe4>, <&ps_venc_pipe5>;
+	};
+
+	ps_ane_sys_cpu: power-controller@c000 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys_cpu";
+		power-domains = <&ps_ane_sys>;
+	};
+
+	ps_disp0_cpu0: power-controller@10018 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+	ps_debug: power-controller@58 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_usb: power-controller@b8 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_usb";
+		apple,always-on; /* Core AON device */
+		power-domains = <&ps_debug>;
+	};
+
+	ps_debug_auth: power-controller@c0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_auth";
+		apple,always-on; /* Core AON device */
+		power-domains = <&ps_debug>;
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
new file mode 100644
index 000000000..9b0dad6b6
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8103 "M1" SoC
+ *
+ * Other names: H13G, "Tonga"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+	compatible = "apple,t8103", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,icestorm";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <714>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p0: cpu@10100 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p1: cpu@10101 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p2: cpu@10102 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p3: cpu@10103 {
+			compatible = "apple,firestorm";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0xc00000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <972000000>;
+			opp-level = <2>;
+			clock-latency-ns = <22000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1332000000>;
+			opp-level = <3>;
+			clock-latency-ns = <27000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2064000000>;
+			opp-level = <5>;
+			clock-latency-ns = <50000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <8000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <828000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <4>;
+			clock-latency-ns = <23000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-level = <5>;
+			clock-latency-ns = <24000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-level = <6>;
+			clock-latency-ns = <29000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1956000000>;
+			opp-level = <7>;
+			clock-latency-ns = <31000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2184000000>;
+			opp-level = <8>;
+			clock-latency-ns = <34000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2388000000>;
+			opp-level = <9>;
+			clock-latency-ns = <36000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-level = <10>;
+			clock-latency-ns = <51000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2772000000>;
+			opp-level = <11>;
+			clock-latency-ns = <54000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <55000>;
+		};
+#if 0
+		/* Not available until CPU deep sleep is implemented */
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <55000>;
+			turbo-mode;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3144000000>;
+			opp-level = <14>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <15>;
+			clock-latency-ns = <56000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		cpufreq_e: performance-controller@210e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: performance-controller@211e20000 {
+			compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 635 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 627 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 628 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 629 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			status = "disabled"; /* not used in all devices */
+			power-domains = <&ps_i2c2>;
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 630 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8103-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 631 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled"; /* only used in J293 */
+		};
+
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8103-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 605 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 607 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
+			status = "disabled";
+		};
+
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8103-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8103-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 619 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 620 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 621 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 623 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 624 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				"tx1a", "rx1a", "tx1b", "rx1b",
+				"tx2a", "rx2a", "tx2b", "rx2b",
+				"tx3a", "rx3a", "tx3b", "rx3b",
+				"tx4a", "rx4a", "tx4b", "rx4b",
+				"tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8103-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
+		aic: interrupt-controller@23b100000 {
+			compatible = "apple,t8103-aic", "apple,aic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b100000 0x0 0x8000>;
+			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
+				};
+			};
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 212>;
+			apple,npins = <212>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(192, 1)>,
+					 <APPLE_PINMUX(188, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(201, 1)>,
+					 <APPLE_PINMUX(199, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(162, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(150, 1)>,
+					 <APPLE_PINMUX(151, 1)>,
+					 <APPLE_PINMUX(32, 1)>;
+			};
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 23>;
+			apple,npins = <23>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8103-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 16>;
+			apple,npins = <16>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 42>;
+			apple,npins = <42>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 583 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 584 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 585 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 586 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@27bc50000 {
+			compatible = "apple,t8103-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
+
+		pcie0_dart_0: iommu@681008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 696 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+		};
+
+		pcie0_dart_1: iommu@682008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0_dart_2: iommu@683008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8103-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x100000>,
+			      <0x6 0x81000000 0x0 0x4000>,
+			      <0x6 0x82000000 0x0 0x4000>,
+			      <0x6 0x83000000 0x0 0x4000>;
+			reg-names = "config", "rc", "port0", "port1", "port2";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+
+			iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				    <0x200 &pcie0_dart_1 1 1>,
+				    <0x300 &pcie0_dart_2 1 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			power-domains = <&ps_apcie_gp>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			port00: pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 152 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+						<0 0 0 2 &port00 0 0 0 1>,
+						<0 0 0 3 &port00 0 0 0 2>,
+						<0 0 0 4 &port00 0 0 0 3>;
+			};
+
+			port01: pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 153 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+						<0 0 0 2 &port01 0 0 0 1>,
+						<0 0 0 3 &port01 0 0 0 2>,
+						<0 0 0 4 &port01 0 0 0 3>;
+				status = "disabled";
+			};
+
+			port02: pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+						<0 0 0 2 &port02 0 0 0 1>,
+						<0 0 0 3 &port02 0 0 0 2>,
+						<0 0 0 4 &port02 0 0 0 3>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t8103-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t8112-j413.dts b/arch/arm64/boot/dts/apple/t8112-j413.dts
new file mode 100644
index 000000000..6f6965862
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j413.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (M2, 2022)
+ *
+ * target-type: J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j413", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,hokkaido";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,hokkaido";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j473.dts b/arch/arm64/boot/dts/apple/t8112-j473.dts
new file mode 100644
index 000000000..06fe257f0
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j473.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple Mac mini (M2, 2023)
+ *
+ * target-type: J473
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+
+/ {
+	compatible = "apple,j473", "apple,t8112", "apple,arm-platform";
+	model = "Apple Mac mini (M2, 2023)";
+
+	aliases {
+		ethernet0 = &ethernet0;
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+};
+
+&port01 {
+	bus-range = <2 2>;
+	status = "okay";
+};
+
+&port02 {
+	bus-range = <3 3>;
+	status = "okay";
+	ethernet0: ethernet@0,0 {
+		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 00];
+	};
+};
+
+&pcie1_dart {
+	status = "okay";
+};
+
+&pcie2_dart {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-j493.dts b/arch/arm64/boot/dts/apple/t8112-j493.dts
new file mode 100644
index 000000000..0ad908349
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j493.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Pro (13-inch, M1, 2022)
+ *
+ * target-type: J493
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j493", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Pro (13-inch, M2, 2022)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4425";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,kyushu";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f69";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,kyushu";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
new file mode 100644
index 000000000..f5edf6111
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-jxxx.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple M2 MacBook Air/Pro (M2, 2022)
+ *
+ * This file contains parts common to all Apple M2 devices using the t8112.
+ *
+ * target-type: J493, J413
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	aliases {
+		serial0 = &serial0;
+		serial2 = &serial2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+		};
+	};
+
+	memory@800000000 {
+		device_type = "memory";
+		reg = <0x8 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&nco_clkref {
+	clock-frequency = <900000000>;
+};
diff --git a/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
new file mode 100644
index 000000000..7c050c6f2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-pmgr.dtsi
@@ -0,0 +1,1140 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for the Apple T8112 "M2" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+
+&pmgr {
+	ps_sbr: power-controller@100 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sbr";
+		apple,always-on; /* Core device */
+	};
+
+	ps_aic: power-controller@108 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aic";
+		apple,always-on; /* Core device */
+	};
+
+	ps_dwi: power-controller@110 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dwi";
+		apple,always-on; /* Core device */
+	};
+
+	ps_soc_spmi0: power-controller@118 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_spmi0";
+	};
+
+	ps_gpio: power-controller@120 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gpio";
+	};
+
+	ps_pms_busif: power-controller@128 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_busif";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms: power-controller@130 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pms_c1ppt: power-controller@160 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_c1ppt";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_soc_dpe: power-controller@168 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "soc_dpe";
+		apple,always-on; /* Core device */
+	};
+
+	ps_pmgr_soc_ocla: power-controller@170 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmgr_soc_ocla";
+		power-domains = <&ps_pms>;
+	};
+
+	ps_ispsens0: power-controller@178 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens0";
+	};
+
+	ps_ispsens1: power-controller@180 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens1";
+	};
+
+	ps_ispsens2: power-controller@188 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens2";
+	};
+
+	ps_ispsens3: power-controller@190 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ispsens3";
+	};
+
+	ps_pcie_ref: power-controller@198 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pcie_ref";
+	};
+
+	ps_aft0: power-controller@1a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aft0";
+	};
+
+	ps_imx: power-controller@1a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "imx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_sio_busif: power-controller@1b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_busif";
+	};
+
+	ps_sio: power-controller@1b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio";
+		apple,always-on;
+		power-domains = <&ps_sio_busif>;
+	};
+
+	ps_sio_cpu: power-controller@1c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_cpu";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm0: power-controller@1c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm1: power-controller@1d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_fpwm2: power-controller@1d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "fpwm2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c0: power-controller@1e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c0";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c1: power-controller@1e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c1";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c2: power-controller@1f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c2";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c3: power-controller@1f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c3";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_i2c4: power-controller@200 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "i2c4";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi_p: power-controller@208 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_uart_p: power-controller@210 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_audio_p: power-controller@218 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "audio_p";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_aes: power-controller@220 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "aes";
+		power-domains = <&ps_sio>;
+	};
+
+	ps_spi0: power-controller@228 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi0";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi1: power-controller@230 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi1";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi2: power-controller@238 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi2";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi3: power-controller@240 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi3";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi4: power-controller@248 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi4";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_spi5: power-controller@250 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "spi5";
+		power-domains = <&ps_spi_p>;
+	};
+
+	ps_uart_n: power-controller@258 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart_n";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart0: power-controller@260 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart0";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart1: power-controller@268 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart1";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart2: power-controller@270 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart2";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart3: power-controller@278 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart3";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart4: power-controller@280 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart4";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart5: power-controller@288 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart5";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart6: power-controller@290 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart6";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart7: power-controller@298 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart7";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_uart8: power-controller@2a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "uart8";
+		power-domains = <&ps_uart_p>;
+	};
+
+	ps_sio_adma: power-controller@2a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sio_adma";
+		power-domains = <&ps_spi_p>, <&ps_audio_p>;
+	};
+
+	ps_dpa0: power-controller@2b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa0";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_dpa1: power-controller@2b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dpa1";
+		power-domains = <&ps_audio_p>;
+	};
+
+	ps_mca0: power-controller@2c0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca0";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca1: power-controller@2c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca1";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca2: power-controller@2d0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca2";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca3: power-controller@2d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca3";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca4: power-controller@2e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca4";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mca5: power-controller@2e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mca5";
+		power-domains = <&ps_sio_adma>, <&ps_audio_p>;
+	};
+
+	ps_mcc: power-controller@2f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mcc";
+		apple,always-on; /* Memory controller */
+	};
+
+	ps_dcs0: power-controller@2f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs0";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs2: power-controller@300 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs2";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs1: power-controller@308 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs1";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs3: power-controller@310 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs3";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs4: power-controller@318 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs4";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs5: power-controller@320 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs5";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs6: power-controller@328 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs6";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_dcs7: power-controller@330 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dcs7";
+		apple,always-on; /* LPDDR4 interface */
+	};
+
+	ps_smx0: power-controller@338 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx0";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_smx1: power-controller@340 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "smx1";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_apcie: power-controller@348 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie";
+		power-domains = <&ps_imx>, <&ps_pcie_ref>;
+	};
+
+	ps_rmx0: power-controller@350 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx0";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_rmx1: power-controller@358 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "rmx1";
+		/* Apple Fabric, display/image stuff: this can power down */
+	};
+
+	ps_cmx: power-controller@360 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "cmx";
+		apple,always-on; /* Apple fabric, critical block */
+	};
+
+	ps_mmx: power-controller@368 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mmx";
+		/* Apple Fabric, media stuff: this can power down */
+	};
+
+	ps_disp0_sys: power-controller@370 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_sys";
+		power-domains = <&ps_rmx1>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_disp0_fe: power-controller@378 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_fe";
+		power-domains = <&ps_disp0_sys>;
+		apple,always-on; /* TODO: figure out if we can enable PM here */
+	};
+
+	ps_dispext_sys: power-controller@380 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_sys";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispext_fe: power-controller@388 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_fe";
+		power-domains = <&ps_dispext_sys>;
+	};
+
+	ps_dispext_cpu0: power-controller@3c8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispext_cpu0";
+		power-domains = <&ps_dispext_fe>;
+		apple,min-state = <4>;
+	};
+
+	ps_dptx_ext_phy: power-controller@3d8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dptx_ext_phy";
+	};
+
+	ps_dispdfr_fe: power-controller@3e0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_fe";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_dispdfr_be: power-controller@3e8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "dispdfr_be";
+		power-domains = <&ps_dispdfr_fe>;
+	};
+
+	ps_mipi_dsi: power-controller@3f0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "mipi_dsi";
+		power-domains = <&ps_dispdfr_be>;
+	};
+
+	ps_jpg: power-controller@3f8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "jpg";
+		power-domains = <&ps_cmx>;
+	};
+
+	ps_apcie_gp: power-controller@400 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x400 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_gp";
+		power-domains = <&ps_apcie>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	ps_msr: power-controller@408 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_pmp: power-controller@410 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pmp";
+		apple,always-on;
+	};
+
+	ps_pms_sram: power-controller@418 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "pms_sram";
+		apple,always-on;
+	};
+
+	ps_msr_ase_core: power-controller@420 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msr_ase_core";
+		power-domains = <&ps_msr>;
+	};
+
+	ps_ans: power-controller@428 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ans";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_gfx: power-controller@430 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x430 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "gfx";
+	};
+
+	ps_isp_sys: power-controller@438 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x438 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "isp_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_venc_sys: power-controller@440 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x440 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_sys";
+		power-domains = <&ps_rmx1>;
+	};
+
+	ps_avd_sys: power-controller@448 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x448 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "avd_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_apcie_st: power-controller@450 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x450 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "apcie_st";
+		power-domains = <&ps_apcie>, <&ps_ans>;
+	};
+
+	ps_atc0_common: power-controller@458 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x458 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_common";
+		power-domains = <&ps_imx>;
+	};
+
+	ps_atc0_pcie: power-controller@460 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x460 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_pcie";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio: power-controller@468 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x468 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio";
+		power-domains = <&ps_atc0_common>;
+	};
+
+	ps_atc0_cio_pcie: power-controller@470 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x470 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_pcie";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc0_cio_usb: power-controller@478 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x478 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_cio_usb";
+		power-domains = <&ps_atc0_cio>;
+	};
+
+	ps_atc1_common: power-controller@480 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x480 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_common";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_atc1_pcie: power-controller@488 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x488 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_pcie";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio: power-controller@490 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x490 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio";
+		power-domains = <&ps_atc1_common>;
+	};
+
+	ps_atc1_cio_pcie: power-controller@498 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x498 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_pcie";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_atc1_cio_usb: power-controller@4a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_cio_usb";
+		power-domains = <&ps_atc1_cio>;
+	};
+
+	ps_ane_sys: power-controller@4a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "ane_sys";
+		power-domains = <&ps_mmx>;
+	};
+
+	ps_scodec: power-controller@4b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x4b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "scodec";
+		power-domains = <&ps_rmx0>;
+	};
+
+	ps_sep: power-controller@c00 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "sep";
+		apple,always-on;
+	};
+
+	ps_venc_dma: power-controller@8000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_dma";
+		power-domains = <&ps_venc_sys>;
+	};
+
+	ps_venc_pipe4: power-controller@8008 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe4";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_pipe5: power-controller@8010 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_pipe5";
+		power-domains = <&ps_venc_dma>;
+	};
+
+	ps_venc_me0: power-controller@8018 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me0";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_venc_me1: power-controller@8020 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "venc_me1";
+		power-domains = <&ps_venc_pipe5>, <&ps_venc_pipe4>;
+	};
+
+	ps_disp0_cpu0: power-controller@10000 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x10000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "disp0_cpu0";
+		power-domains = <&ps_disp0_fe>;
+		apple,min-state = <4>;
+	};
+};
+
+&pmgr_mini {
+
+	ps_debug_gated: power-controller@58 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_gated";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi0: power-controller@60 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi0";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_spmi1: power-controller@68 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_spmi1";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_aon: power-controller@70 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_aon";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_msg: power-controller@78 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "msg";
+	};
+
+	ps_nub_gpio: power-controller@80 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_gpio";
+		apple,always-on;
+	};
+
+	ps_atc0_usb_aon: power-controller@88 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc1_usb_aon: power-controller@90 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb_aon";
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	ps_atc0_usb: power-controller@98 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc0_usb";
+		power-domains = <&ps_atc0_usb_aon>, <&ps_atc0_common>;
+	};
+
+	ps_atc1_usb: power-controller@a0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "atc1_usb";
+		power-domains = <&ps_atc1_usb_aon>, <&ps_atc1_common>;
+	};
+
+	ps_nub_fabric: power-controller@a8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_fabric";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_nub_sram: power-controller@b0 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "nub_sram";
+		apple,always-on; /* Core AON device */
+	};
+
+	ps_debug_switch: power-controller@b8 {
+		compatible = "apple,t8112-pmgr-pwrstate", "apple,pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = "debug_switch";
+		apple,always-on; /* Core AON device */
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
new file mode 100644
index 000000000..1666e6ab2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T8112 "M2" SoC
+ *
+ * Other names: H14G
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	compatible = "apple,t8112", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e0>;
+				};
+				core1 {
+					cpu = <&cpu_e1>;
+				};
+				core2 {
+					cpu = <&cpu_e2>;
+				};
+				core3 {
+					cpu = <&cpu_e3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p0>;
+				};
+				core1 {
+					cpu = <&cpu_p1>;
+				};
+				core2 {
+					cpu = <&cpu_p2>;
+				};
+				core3 {
+					cpu = <&cpu_p3>;
+				};
+			};
+		};
+
+		cpu_e0: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e1: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e2: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_e3: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&ecluster_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+		};
+
+		cpu_p0: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p1: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p2: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		cpu_p3: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			operating-points-v2 = <&pcluster_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p>;
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	ecluster_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7500>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <20000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <30000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <35000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <39000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <53000>;
+		};
+	};
+
+	pcluster_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <660000000>;
+			opp-level = <1>;
+			clock-latency-ns = <9000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-level = <2>;
+			clock-latency-ns = <19000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <22000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <26000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <28000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <30000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <33000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <34000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <36000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <41000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <2988000000>;
+			opp-level = <12>;
+			clock-latency-ns = <42000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3096000000>;
+			opp-level = <13>;
+			clock-latency-ns = <44000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3204000000>;
+			opp-level = <14>;
+			clock-latency-ns = <46000>;
+		};
+		/* Not available until CPU deep sleep is implemented */
+#if 0
+		opp15 {
+			opp-hz = /bits/ 64 <3324000000>;
+			opp-level = <15>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <62000>;
+			turbo-mode;
+		};
+#endif
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		cpufreq_e: cpufreq@210e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x10e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		cpufreq_p: cpufreq@211e20000 {
+			compatible = "apple,t8112-cluster-cpufreq", "apple,cluster-cpufreq";
+			reg = <0x2 0x11e20000 0 0x1000>;
+			#performance-domain-cells = <0>;
+		};
+
+		sio_dart: iommu@235004000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x2 0x35004000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 769 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			power-domains = <&ps_sio_cpu>;
+		};
+
+		i2c0: i2c@235010000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35010000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 761 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@235014000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35014000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 762 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@235018000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35018000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 763 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@23501c000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x3501c000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 764 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c3>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@235020000 {
+			compatible = "apple,t8112-i2c", "apple,i2c";
+			reg = <0x2 0x35020000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 765 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			power-domains = <&ps_i2c4>;
+			status = "disabled";
+		};
+
+		fpwm1: pwm@235044000 {
+			compatible = "apple,t8112-fpwm", "apple,s5l-fpwm";
+			reg = <0x2 0x35044000 0x0 0x4000>;
+			power-domains = <&ps_fpwm1>;
+			clocks = <&clkref>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		serial0: serial@235200000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35200000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 739 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * TODO: figure out the clocking properly, there may
+			 * be a third selectable clock.
+			 */
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart0>;
+			status = "disabled";
+		};
+
+		serial2: serial@235208000 {
+			compatible = "apple,s5l-uart";
+			reg = <0x2 0x35208000 0x0 0x1000>;
+			reg-io-width = <4>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 741 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkref>, <&clkref>;
+			clock-names = "uart", "clk_uart_baud0";
+			power-domains = <&ps_uart2>;
+			status = "disabled";
+		};
+
+		admac: dma-controller@238200000 {
+			compatible = "apple,t8112-admac", "apple,admac";
+			reg = <0x2 0x38200000 0x0 0x34000>;
+			dma-channels = <24>;
+			interrupts-extended = <0>,
+					      <&aic AIC_IRQ 760 IRQ_TYPE_LEVEL_HIGH>,
+					      <0>,
+					      <0>;
+			#dma-cells = <1>;
+			iommus = <&sio_dart 2>;
+			power-domains = <&ps_sio_adma>;
+			resets = <&ps_audio_p>;
+		};
+
+		mca: i2s@238400000 {
+			compatible = "apple,t8112-mca", "apple,mca";
+			reg = <0x2 0x38400000 0x0 0x18000>,
+			      <0x2 0x38300000 0x0 0x30000>;
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 757 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 758 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&ps_audio_p>;
+			clocks = <&nco 0>, <&nco 1>, <&nco 2>,
+				 <&nco 3>, <&nco 4>, <&nco 4>;
+			power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+					<&ps_mca2>, <&ps_mca3>, <&ps_mca4>, <&ps_mca5>;
+			dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+			       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+			       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+			       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>,
+			       <&admac 16>, <&admac 17>, <&admac 18>, <&admac 19>,
+			       <&admac 20>, <&admac 21>, <&admac 22>, <&admac 23>;
+			dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+				    "tx1a", "rx1a", "tx1b", "rx1b",
+				    "tx2a", "rx2a", "tx2b", "rx2b",
+				    "tx3a", "rx3a", "tx3b", "rx3b",
+				    "tx4a", "rx4a", "tx4b", "rx4b",
+				    "tx5a", "rx5a", "tx5b", "rx5b";
+
+			#sound-dai-cells = <1>;
+		};
+
+		nco: clock-controller@23b044000 {
+			compatible = "apple,t8112-nco", "apple,nco";
+			reg = <0x2 0x3b044000 0x0 0x14000>;
+			clocks = <&nco_clkref>;
+			#clock-cells = <1>;
+		};
+
+		aic: interrupt-controller@23b0c0000 {
+			compatible = "apple,t8112-aic", "apple,aic2";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x2 0x3b0c0000 0x0 0x8000>,
+				<0x2 0x3b0c8000 0x0 0x4>;
+			reg-names = "core", "event";
+			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu_e0 &cpu_e1 &cpu_e2 &cpu_e3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu_p0 &cpu_p1 &cpu_p2 &cpu_p3>;
+				};
+			};
+		};
+
+		pmgr: power-management@23b700000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3b700000 0 0x14000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		pinctrl_ap: pinctrl@23c100000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3c100000 0x0 0x100000>;
+			power-domains = <&ps_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_ap 0 0 213>;
+			apple,npins = <213>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 205 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(111, 1)>,
+					 <APPLE_PINMUX(110, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(113, 1)>,
+					 <APPLE_PINMUX(112, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(54, 1)>,
+					 <APPLE_PINMUX(53, 1)>;
+			};
+
+			i2c4_pins: i2c4-pins {
+				pinmux = <APPLE_PINMUX(131, 1)>,
+					 <APPLE_PINMUX(130, 1)>;
+			};
+
+			spi3_pins: spi3-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					<APPLE_PINMUX(47, 1)>,
+					<APPLE_PINMUX(48, 1)>,
+					<APPLE_PINMUX(49, 1)>;
+			};
+
+			pcie_pins: pcie-pins {
+				pinmux = <APPLE_PINMUX(162, 1)>,
+					 <APPLE_PINMUX(163, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+				// TODO: 1 more CLKREQs
+			};
+		};
+
+		pinctrl_nub: pinctrl@23d1f0000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3d1f0000 0x0 0x4000>;
+			power-domains = <&ps_nub_gpio>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_nub 0 0 24>;
+			apple,npins = <24>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 377 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmgr_mini: power-management@23d280000 {
+			compatible = "apple,t8112-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2 0x3d280000 0 0x4000>;
+			/* child nodes are added in t8103-pmgr.dtsi */
+		};
+
+		wdt: watchdog@23d2b0000 {
+			compatible = "apple,t8112-wdt", "apple,wdt";
+			reg = <0x2 0x3d2b0000 0x0 0x4000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 379 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_smc: pinctrl@23e820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x3e820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_smc 0 0 18>;
+			apple,npins = <18>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 491 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 492 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 493 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 494 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 495 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 496 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aop: pinctrl@24a820000 {
+			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
+			reg = <0x2 0x4a820000 0x0 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aop 0 0 54>;
+			apple,npins = <54>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ans_mbox: mbox@277408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x77408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 717 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 718 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 719 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 720 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans>;
+		};
+
+		sart: sart@27bc50000 {
+			compatible = "apple,t8112-sart", "apple,t6000-sart";
+			reg = <0x2 0x7bc50000 0x0 0x10000>;
+			power-domains = <&ps_ans>;
+		};
+
+		nvme@27bcc0000 {
+			compatible = "apple,t8112-nvme-ans2", "apple,nvme-ans2";
+			reg = <0x2 0x7bcc0000 0x0 0x40000>,
+				<0x2 0x77400000 0x0 0x4000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 724 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans>, <&ps_apcie_st>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans>;
+		};
+
+		pcie0_dart: iommu@681008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 782 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+		};
+
+		pcie1_dart: iommu@682008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 785 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie2_dart: iommu@683008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 788 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie3_dart: iommu@684008000 {
+			compatible = "apple,t8110-dart";
+			reg = <0x6 0x84008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 791 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&ps_apcie_gp>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8112-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x100000>,
+			      <0x6 0x81000000 0x0 0x4000>,
+			      <0x6 0x82000000 0x0 0x4000>,
+			      <0x6 0x83000000 0x0 0x4000>,
+			      <0x6 0x84000000 0x0 0x4000>;
+			reg-names = "config", "rc", "port0", "port1", "port2", "port3";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 781 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 787 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 790 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <&aic AIC_IRQ 793 IRQ_TYPE_EDGE_RISING 32>;
+
+			iommu-map = <0x100 &pcie0_dart 0 1>,
+				    <0x200 &pcie1_dart 1 1>,
+				    <0x300 &pcie2_dart 2 1>,
+				    <0x400 &pcie3_dart 3 1>;
+			iommu-map-mask = <0xff00>;
+
+			bus-range = <0 4>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			power-domains = <&ps_apcie_gp>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			port00: pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 166 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+						<0 0 0 2 &port00 0 0 0 1>,
+						<0 0 0 3 &port00 0 0 0 2>,
+						<0 0 0 4 &port00 0 0 0 3>;
+			};
+
+			port01: pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 167 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+						<0 0 0 2 &port01 0 0 0 1>,
+						<0 0 0 3 &port01 0 0 0 2>,
+						<0 0 0 4 &port01 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			port02: pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 168 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+						<0 0 0 2 &port02 0 0 0 1>,
+						<0 0 0 3 &port02 0 0 0 2>,
+						<0 0 0 4 &port02 0 0 0 3>;
+
+				status = "disabled";
+			};
+
+			/* TODO: GPIO unknown */
+			port03: pci@3,0 {
+				device_type = "pci";
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				//reset-gpios = <&pinctrl_ap 33 GPIO_ACTIVE_LOW>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+						<0 0 0 2 &port03 0 0 0 1>,
+						<0 0 0 3 &port03 0 0 0 2>,
+						<0 0 0 4 &port03 0 0 0 3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "t8112-pmgr.dtsi"
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
new file mode 100644
index 000000000..d908e96d7
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	foundation-v8.dtb foundation-v8-psci.dtb \
+	foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb juno-r1-scmi.dtb juno-r2-scmi.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
new file mode 100644
index 000000000..901a7fc83
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+	model = "ARM Corstone1000 FVP (Fixed Virtual Platform)";
+	compatible = "arm,corstone1000-fvp";
+
+	smsc: ethernet@4010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x40100000 0x10000>;
+		phy-mode = "mii";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		reg-io-width = <2>;
+	};
+
+	vmmc_v3_3d: fixed_v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sdmmc0: mmc@40300000 {
+		compatible = "arm,pl18x", "arm,primecell";
+		reg = <0x40300000 0x1000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		max-frequency = <12000000>;
+		vmmc-supply = <&vmmc_v3_3d>;
+		clocks = <&smbclk>, <&refclk100mhz>;
+		clock-names = "smclk", "apb_pclk";
+	};
+
+	sdmmc1: mmc@50000000 {
+		compatible = "arm,pl18x", "arm,primecell";
+		reg = <0x50000000 0x10000>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		max-frequency = <12000000>;
+		vmmc-supply = <&vmmc_v3_3d>;
+		clocks = <&smbclk>, <&refclk100mhz>;
+		clock-names = "smclk", "apb_pclk";
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
new file mode 100644
index 000000000..10d265be0
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+	model = "ARM Corstone1000 FPGA MPS3 board";
+	compatible = "arm,corstone1000-mps3";
+
+	smsc: ethernet@4010000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x40100000 0x10000>;
+		phy-mode = "mii";
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+	};
+
+	usb_host: usb@40200000 {
+		compatible = "nxp,usb-isp1763";
+		reg = <0x40200000 0x100000>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <16>;
+		dr_mode = "host";
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
new file mode 100644
index 000000000..6ad7829f9
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	memory@88200000 {
+		device_type = "memory";
+		reg = <0x88200000 0x77e00000>;
+	};
+
+	gic: interrupt-controller@1c000000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1c010000 0x1000>,
+		      <0x1c02f000 0x2000>,
+		      <0x1c04f000 0x1000>,
+		      <0x1c06f000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+	};
+
+	refclk100mhz: refclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	smbclk: refclk24mhzx2 {
+		/* Reference 24MHz clock x 2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+		clock-output-names = "smclk";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	uartclk: uartclk {
+		/* UART clock - 50MHz */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "uartclk";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer@1a220000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x1a220000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-frequency = <50000000>;
+			ranges;
+
+			frame@1a230000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x1a230000 0x1000>;
+			};
+		};
+
+		uart0: serial@1a510000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1a510000 0x1000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&refclk100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@1a520000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1a520000 0x1000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&refclk100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		mhu_hse1: mailbox@1b820000 {
+			compatible = "arm,mhuv2-tx", "arm,primecell";
+			reg = <0x1b820000 0x1000>;
+			clocks = <&refclk100mhz>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			arm,mhuv2-protocols = <0 0>;
+			secure-status = "okay";     /* secure-world-only */
+			status = "disabled";
+		};
+
+		mhu_seh1: mailbox@1b830000 {
+			compatible = "arm,mhuv2-rx", "arm,primecell";
+			reg = <0x1b830000 0x1000>;
+			clocks = <&refclk100mhz>;
+			clock-names = "apb_pclk";
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+			arm,mhuv2-protocols = <0 0>;
+			secure-status = "okay";     /* secure-world-only */
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
new file mode 100644
index 000000000..655fdcce1
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi
@@ -0,0 +1,19 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv2 configuration)
+ */
+
+/ {
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts
new file mode 100644
index 000000000..e096e670b
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts
@@ -0,0 +1,9 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3+PSCI configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv3.dtsi"
+#include "foundation-v8-psci.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
new file mode 100644
index 000000000..c87380e87
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3 configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv3.dtsi"
+#include "foundation-v8-spin-table.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
new file mode 100644
index 000000000..17fba3bc9
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi
@@ -0,0 +1,29 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3 configuration)
+ */
+
+/ {
+	gic: interrupt-controller@2f000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x2f000000 0x100000>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0x0 0x10000>,
+		      <0x0 0x2f100000 0x0 0x200000>,
+		      <0x0 0x2c000000 0x0 0x2000>,
+		      <0x0 0x2c010000 0x0 0x2000>,
+		      <0x0 0x2c02f000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: msi-controller@2f020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x20000 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts
new file mode 100644
index 000000000..723f23c7c
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts
@@ -0,0 +1,9 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv2+PSCI configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv2.dtsi"
+#include "foundation-v8-psci.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi
new file mode 100644
index 000000000..16cdf3957
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi
@@ -0,0 +1,28 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (PSCI configuration)
+ */
+
+/ {
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+};
+
+&cpu0 {
+	enable-method = "psci";
+};
+
+&cpu1 {
+	enable-method = "psci";
+};
+
+&cpu2 {
+	enable-method = "psci";
+};
+
+&cpu3 {
+	enable-method = "psci";
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi
new file mode 100644
index 000000000..4d4186ba0
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi
@@ -0,0 +1,25 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (spin table configuration)
+ */
+
+&cpu0 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
+
+&cpu2 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
+
+&cpu3 {
+	enable-method = "spin-table";
+	cpu-release-addr = <0x0 0x8000fff8>;
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
new file mode 100644
index 000000000..b17347d75
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv2 configuration)
+ */
+
+#include "foundation-v8.dtsi"
+#include "foundation-v8-gicv2.dtsi"
+#include "foundation-v8-spin-table.dtsi"
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
new file mode 100644
index 000000000..7b4153773
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	model = "Foundation-v8A";
+	compatible = "arm,foundation-aarch64", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	watchdog@2a440000 {
+		compatible = "arm,sbsa-gwdt";
+		reg = <0x0 0x2a440000 0 0x1000>,
+			<0x0 0x2a450000 0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		timeout-sec = <30>;
+	};
+
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	bus@8000000 {
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		ethernet@202000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		iofpga-bus@300000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@10000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+			};
+
+			v2m_serial0: serial@90000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: serial@a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: serial@b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: serial@c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			virtio@130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x200>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
new file mode 100644
index 000000000..60472d65a
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * FVP Base RevC
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "rtsm_ve-motherboard.dtsi"
+#include "rtsm_ve-motherboard-rs2.dtsi"
+
+/ {
+	model = "FVP Base RevC";
+	compatible = "arm,fvp-base-revc", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C0_L2>;
+		};
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&C1_L2>;
+		};
+		C0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		C1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2,00000000 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x00000000 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@2f000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c02f000 0 0x2000>;	// GICV
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: msi-controller@2f020000 {
+			#msi-cells = <1>;
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0x2f020000 0x0 0x20000>; // GITS
+			msi-controller;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spe-pmu {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pci: pci@40000000 {
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		#interrupt-cells = <0x1>;
+		compatible = "pci-host-ecam-generic";
+		device_type = "pci";
+		bus-range = <0x0 0x1>;
+		reg = <0x0 0x40000000 0x0 0x10000000>;
+		ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>;
+		interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 0 GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 0 GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		msi-map = <0x0 &its 0x0 0x10000>;
+		iommu-map = <0x0 &smmu 0x0 0x10000>;
+
+		dma-coherent;
+	};
+
+	smmu: iommu@2b400000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x2b400000 0x0 0x100000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror", "priq", "cmdq-sync";
+		dma-coherent;
+		#iommu-cells = <1>;
+		msi-parent = <&its 0x10000>;
+	};
+
+	panel {
+		compatible = "arm,rtsm-display";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 0 GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 0 GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 0 GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 0 GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 0 GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 0 GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 0 GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 0 GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 0 GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 0 GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic 0 0 GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic 0 0 GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic 0 0 GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic 0 0 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic 0 0 GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic 0 0 GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic 0 0 GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic 0 0 GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic 0 0 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic 0 0 GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic 0 0 GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic 0 0 GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic 0 0 GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic 0 0 GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic 0 0 GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic 0 0 GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic 0 0 GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic 0 0 GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic 0 0 GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic 0 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic 0 0 GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic 0 0 GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic 0 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic 0 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic 0 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic 0 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic 0 0 GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic 0 0 GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 46 &gic 0 0 GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
new file mode 100644
index 000000000..8b4d280b1
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -0,0 +1,997 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "juno-clocks.dtsi"
+#include "juno-motherboard.dtsi"
+
+/ {
+	/*
+	 *  Devices shared by all Juno boards
+	 */
+
+	memtimer: timer@2a810000 {
+		compatible = "arm,armv7-timer-mem";
+		reg = <0x0 0x2a810000 0x0 0x10000>;
+		clock-frequency = <50000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2a820000 0x20000>;
+		status = "disabled";
+		frame@2a830000 {
+			frame-number = <1>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x10000 0x10000>;
+		};
+	};
+
+	mailbox: mhu@2b1f0000 {
+		compatible = "arm,mhu", "arm,primecell";
+		reg = <0x0 0x2b1f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		clocks = <&soc_refclk100mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	smmu_gpu: iommu@2b400000 {
+		compatible = "arm,mmu-400", "arm,smmu-v1";
+		reg = <0x0 0x2b400000 0x0 0x10000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		power-domains = <&scpi_devpd 1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_pcie: iommu@2b500000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b500000 0x0 0x10000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	smmu_etr: iommu@2b600000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x2b600000 0x0 0x10000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		reg = <0x0 0x2c010000 0 0x1000>,
+		      <0x0 0x2c02f000 0 0x2000>,
+		      <0x0 0x2c04f000 0 0x2000>,
+		      <0x0 0x2c06f000 0 0x2000>;
+		#address-cells = <1>;
+		#interrupt-cells = <3>;
+		#size-cells = <1>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		ranges = <0 0 0x2c1c0000 0x40000>;
+
+		v2m_0: v2m@0 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0 0x10000>;
+		};
+
+		v2m@10000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x10000 0x10000>;
+		};
+
+		v2m@20000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x20000 0x10000>;
+		};
+
+		v2m@30000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x30000 0x10000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/*
+	 * Juno TRMs specify the size for these coresight components as 64K.
+	 * The actual size is just 4K though 64K is reserved. Access to the
+	 * unmapped reserved region results in a DECERR response.
+	 */
+	etf_sys0: etf@20010000 { /* etf0 */
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		in-ports {
+			port {
+				etf0_in_port: endpoint {
+					remote-endpoint = <&main_funnel_out_port>;
+				};
+			};
+		};
+
+		out-ports {
+			port {
+				etf0_out_port: endpoint {
+				};
+			};
+		};
+	};
+
+	tpiu_sys: tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+	};
+
+	/* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/
+	main_funnel: funnel@20040000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		out-ports {
+			port {
+				main_funnel_out_port: endpoint {
+					remote-endpoint = <&etf0_in_port>;
+				};
+			};
+		};
+
+		main_funnel_in_ports: in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				main_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster0_funnel_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				main_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster1_funnel_out_port>;
+				};
+			};
+		};
+	};
+
+	etr_sys: etr@20070000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20070000 0 0x1000>;
+		iommus = <&smmu_etr 0>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		arm,scatter-gather;
+		in-ports {
+			port {
+				etr_in_port: endpoint {
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+	};
+
+	stm_sys: stm@20100000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x20100000 0 0x1000>,
+		      <0 0x28000000 0 0x1000000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				stm_out_port: endpoint {
+				};
+			};
+		};
+	};
+
+	replicator@20120000 {
+		compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+		reg = <0 0x20120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+		};
+		in-ports {
+			port {
+				replicator_in_port0: endpoint {
+				};
+			};
+		};
+	};
+
+	cpu_debug0: cpu-debug@22010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm0: etm@22040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_etm0_out_port: endpoint {
+					remote-endpoint = <&cluster0_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	cti0: cti@22020000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x22020000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm0>;
+	};
+
+	funnel@220c0000 { /* cluster0 funnel */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x220c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster0_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster0_etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				cluster0_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster0_etm1_out_port>;
+				};
+			};
+		};
+	};
+
+	cpu_debug1: cpu-debug@22110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x22110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm1: etm@22140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x22140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster0_etm1_out_port: endpoint {
+					remote-endpoint = <&cluster0_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	cti1: cti@22120000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x22120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm1>;
+	};
+
+	cpu_debug2: cpu-debug@23010000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23010000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm2: etm@23040000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23040000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm0_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	cti2: cti@23020000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23020000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm2>;
+	};
+
+	funnel@230c0000 { /* cluster1 funnel */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x230c0000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_funnel_out_port: endpoint {
+					remote-endpoint = <&main_funnel_in_port1>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				cluster1_funnel_in_port0: endpoint {
+					remote-endpoint = <&cluster1_etm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				cluster1_funnel_in_port1: endpoint {
+					remote-endpoint = <&cluster1_etm1_out_port>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+				cluster1_funnel_in_port2: endpoint {
+					remote-endpoint = <&cluster1_etm2_out_port>;
+				};
+			};
+			port@3 {
+				reg = <3>;
+				cluster1_funnel_in_port3: endpoint {
+					remote-endpoint = <&cluster1_etm3_out_port>;
+				};
+			};
+		};
+	};
+
+	cpu_debug3: cpu-debug@23110000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23110000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm3: etm@23140000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm1_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	cti3: cti@23120000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm3>;
+	};
+
+	cpu_debug4: cpu-debug@23210000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23210000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm4: etm@23240000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23240000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm2_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	cti4: cti@23220000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23220000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm4>;
+	};
+
+	cpu_debug5: cpu-debug@23310000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0x0 0x23310000 0x0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+	};
+
+	etm5: etm@23340000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x23340000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				cluster1_etm3_out_port: endpoint {
+					remote-endpoint = <&cluster1_funnel_in_port3>;
+				};
+			};
+		};
+	};
+
+	cti5: cti@23320000 {
+		compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+			     "arm,primecell";
+		reg = <0 0x23320000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		arm,cs-dev-assoc = <&etm5>;
+	};
+
+	cti_sys0: cti@20020000 { /* sys_cti_0 */
+		compatible = "arm,coresight-cti", "arm,primecell";
+		reg = <0 0x20020000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		trig-conns@0 {
+			reg = <0>;
+			arm,trig-in-sigs = <2 3>;
+			arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+			arm,trig-out-sigs = <0 1>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&etr_sys>;
+		};
+
+		trig-conns@1 {
+			reg = <1>;
+			arm,trig-in-sigs = <0 1>;
+			arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+			arm,trig-out-sigs = <7 6>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&etf_sys0>;
+		};
+
+		trig-conns@2 {
+			reg = <2>;
+			arm,trig-in-sigs = <4 5 6 7>;
+			arm,trig-in-types = <STM_TOUT_SPTE STM_TOUT_SW
+					   STM_TOUT_HETE STM_ASYNCOUT>;
+			arm,trig-out-sigs = <4 5>;
+			arm,trig-out-types = <STM_HWEVENT STM_HWEVENT>;
+			arm,cs-dev-assoc = <&stm_sys>;
+		};
+
+		trig-conns@3 {
+			reg = <3>;
+			arm,trig-out-sigs = <2 3>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&tpiu_sys>;
+		};
+	};
+
+	cti_sys1: cti@20110000 { /* sys_cti_1 */
+		compatible = "arm,coresight-cti", "arm,primecell";
+		reg = <0 0x20110000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		trig-conns@0 {
+			reg = <0>;
+			arm,trig-in-sigs = <0>;
+			arm,trig-in-types = <GEN_INTREQ>;
+			arm,trig-out-sigs = <0>;
+			arm,trig-out-types = <GEN_HALTREQ>;
+			arm,trig-conn-name = "sys_profiler";
+		};
+
+		trig-conns@1 {
+			reg = <1>;
+			arm,trig-out-sigs = <2 3>;
+			arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+			arm,trig-conn-name = "watchdog";
+		};
+
+		trig-conns@2 {
+			reg = <2>;
+			arm,trig-out-sigs = <1 6>;
+			arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
+			arm,trig-conn-name = "g_counter";
+		};
+	};
+
+	gpu: gpu@2d000000 {
+		compatible = "arm,juno-mali", "arm,mali-t624";
+		reg = <0 0x2d000000 0 0x10000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&scpi_dvfs 2>;
+		power-domains = <&scpi_devpd 1>;
+		dma-coherent;
+		/* The SMMU is only really of interest to bare-metal hypervisors */
+		/* iommus = <&smmu_gpu 0>; */
+		status = "disabled";
+	};
+
+	sram: sram@2e000000 {
+		compatible = "arm,juno-sram-ns", "mmio-sram";
+		reg = <0x0 0x2e000000 0x0 0x8000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2e000000 0x8000>;
+
+		cpu_scp_lpri: scp-sram@0 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x0 0x200>;
+		};
+
+		cpu_scp_hpri: scp-sram@200 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x200 0x200>;
+		};
+	};
+
+	pcie_ctlr: pcie@40000000 {
+		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+		device_type = "pci";
+		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>,
+			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		/* Standard AXI Translation entries as programmed by EDK2 */
+		dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&v2m_0>;
+		status = "disabled";
+		iommu-map-mask = <0x0>;	/* RC has no means to output PCI RID */
+		iommu-map = <0x0 &smmu_pcie 0x0 0x1>;
+	};
+
+	scpi {
+		compatible = "arm,scpi";
+		mboxes = <&mailbox 1>;
+		shmem = <&cpu_scp_hpri>;
+
+		clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: clocks-0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>, <1>, <2>;
+				clock-output-names = "atlclk", "aplclk","gpuclk";
+			};
+			scpi_clk: clocks-1 {
+				compatible = "arm,scpi-variable-clocks";
+				#clock-cells = <1>;
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
+			};
+		};
+
+		scpi_devpd: power-controller {
+			compatible = "arm,scpi-power-domains";
+			num-domains = <2>;
+			#power-domain-cells = <1>;
+		};
+
+		scpi_sensors0: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		pmic {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		soc {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		big_cluster_thermal_zone: big-cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 21>;
+			status = "disabled";
+		};
+
+		little_cluster_thermal_zone: little-cluster {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 22>;
+			status = "disabled";
+		};
+
+		gpu0_thermal_zone: gpu0 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 23>;
+			status = "disabled";
+		};
+
+		gpu1_thermal_zone: gpu1 {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&scpi_sensors0 24>;
+			status = "disabled";
+		};
+	};
+
+	smmu_dma: iommu@7fb00000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb00000 0x0 0x10000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+	};
+
+	smmu_hdlcd1: iommu@7fb10000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb10000 0x0 0x10000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+	};
+
+	smmu_hdlcd0: iommu@7fb20000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+	};
+
+	smmu_usb: iommu@7fb30000 {
+		compatible = "arm,mmu-401", "arm,smmu-v1";
+		reg = <0x0 0x7fb30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		#global-interrupts = <1>;
+		dma-coherent;
+	};
+
+	dma-controller@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0x7ff00000 0 0x1000>;
+		#dma-cells = <1>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_dma 0>,
+			 <&smmu_dma 1>,
+			 <&smmu_dma 2>,
+			 <&smmu_dma 3>,
+			 <&smmu_dma 4>,
+			 <&smmu_dma 5>,
+			 <&smmu_dma 6>,
+			 <&smmu_dma 7>,
+			 <&smmu_dma 8>;
+		clocks = <&soc_faxiclk>;
+		clock-names = "apb_pclk";
+	};
+
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd1 0>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: endpoint {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_hdlcd0 0>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: endpoint {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
+	soc_uart0: serial@7ff80000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0x7ff80000 0x0 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	i2c@7ffa0000 {
+		compatible = "snps,designware-i2c";
+		reg = <0x0 0x7ffa0000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <500>;
+		clocks = <&soc_smc50mhz>;
+
+		hdmi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+			port {
+				tda998x_0_input: endpoint {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
+		};
+
+		hdmi-transmitter@71 {
+			compatible = "nxp,tda998x";
+			reg = <0x71>;
+			port {
+				tda998x_1_input: endpoint {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
+		};
+	};
+
+	usb@7ffb0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0x7ffb0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	usb@7ffc0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0x7ffc0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		iommus = <&smmu_usb 0>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* last 16MB of the first memory area is reserved for secure world use by firmware */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+		      <0x00000008 0x80000000 0x1 0x80000000>;
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 15>;
+		interrupt-map = <0 0  0 &gic 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0 GIC_SPI  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0 GIC_SPI  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	site2: tlx-bus@60000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x60000000 0x10000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0>;
+		interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
new file mode 100644
index 000000000..2870b5eeb
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi
@@ -0,0 +1,45 @@
+/*
+ * ARM Juno Platform clocks
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+/ {
+	/* SoC fixed clocks */
+	soc_uartclk: refclk7372800hz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <7372800>;
+		clock-output-names = "juno:uartclk";
+	};
+
+	soc_usb48mhz: clk48mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+		clock-output-names = "clk48mhz";
+	};
+
+	soc_smc50mhz: clk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "smc_clk";
+	};
+
+	soc_refclk100mhz: refclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_faxiclk: refclk400mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <400000000>;
+		clock-output-names = "faxi_clk";
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
new file mode 100644
index 000000000..09d2b692e
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	funnel@20130000 { /* cssys1 */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20130000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				csys1_funnel_out_port: endpoint {
+					remote-endpoint = <&etf1_in_port>;
+				};
+			};
+		};
+		in-ports {
+			port {
+				csys1_funnel_in_port0: endpoint {
+				};
+			};
+
+		};
+	};
+
+	etf_sys1: etf@20140000 { /* etf1 */
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x20140000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		in-ports {
+			port {
+				etf1_in_port: endpoint {
+					remote-endpoint = <&csys1_funnel_out_port>;
+				};
+			};
+		};
+		out-ports {
+			port {
+				etf1_out_port: endpoint {
+					remote-endpoint = <&csys2_funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	funnel@20150000 { /* cssys2 */
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x20150000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+		out-ports {
+			port {
+				csys2_funnel_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				csys2_funnel_in_port0: endpoint {
+					remote-endpoint = <&etf0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				csys2_funnel_in_port1: endpoint {
+					remote-endpoint = <&etf1_out_port>;
+				};
+			};
+
+		};
+	};
+
+	cti_sys2: cti@20160000 { /* sys_cti_2 */
+		compatible = "arm,coresight-cti", "arm,primecell";
+		reg = <0 0x20160000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		trig-conns@0 {
+			reg = <0>;
+			arm,trig-in-sigs = <0 1>;
+			arm,trig-in-types = <SNK_FULL SNK_ACQCOMP>;
+			arm,trig-out-sigs = <0 1>;
+			arm,trig-out-types = <SNK_FLUSHIN SNK_TRIGIN>;
+			arm,cs-dev-assoc = <&etf_sys1>;
+		};
+
+		trig-conns@1 {
+			reg = <1>;
+			arm,trig-in-sigs = <2 3 4>;
+			arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+			arm,trig-conn-name = "ela_clus_0";
+		};
+
+		trig-conns@2 {
+			reg = <2>;
+			arm,trig-in-sigs = <5 6 7>;
+			arm,trig-in-types = <ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+			arm,trig-conn-name = "ela_clus_1";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
new file mode 100644
index 000000000..be42932f7
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -0,0 +1,313 @@
+/*
+ * ARM Juno Platform motherboard peripherals
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+/ {
+	mb_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "juno_mb:clk24mhz";
+	};
+
+	mb_clk25mhz: clk25mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "juno_mb:clk25mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "juno_mb:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "juno_mb:refclk32khz";
+	};
+
+	mb_fixed_3v3: mcc-sb-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MCC_SB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <116>;
+			label = "POWER";
+			gpios = <&iofpga_gpio0 0 0x4>;
+		};
+		home-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <102>;
+			label = "HOME";
+			gpios = <&iofpga_gpio0 1 0x4>;
+		};
+		rlock-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <152>;
+			label = "RLOCK";
+			gpios = <&iofpga_gpio0 2 0x4>;
+		};
+		vol-up-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <115>;
+			label = "VOL+";
+			gpios = <&iofpga_gpio0 3 0x4>;
+		};
+		vol-down-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <114>;
+			label = "VOL-";
+			gpios = <&iofpga_gpio0 4 0x4>;
+		};
+		nmi-button {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <99>;
+			label = "NMI";
+			gpios = <&iofpga_gpio0 5 0x4>;
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
+			compatible = "arm,vexpress,v2p-p1", "simple-bus";
+			#address-cells = <2>;  /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
+			arm,hbi = <0x252>;
+			arm,vexpress,site = <0>;
+
+			flash@0 {
+				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>;
+				bank-width = <4>;
+				/*
+				 * Unfortunately, accessing the flash disturbs
+				 * the CPU idle states (suspend) and CPU
+				 * hotplug of the platform. For this reason,
+				 * flash hardware access is disabled by default.
+				 */
+				status = "disabled";
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			ethernet@200000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x00000000 0x10000>;
+				interrupts = <3>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				clocks = <&mb_clk25mhz>;
+				vdd33a-supply = <&mb_fixed_3v3>;
+				vddvario-supply = <&mb_fixed_3v3>;
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				apbregs@10000 {
+					compatible = "syscon", "simple-mfd";
+					reg = <0x010000 0x1000>;
+					ranges = <0x0 0x10000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					led@8,0 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x01>;
+						label = "vexpress:0";
+						linux,default-trigger = "heartbeat";
+						default-state = "on";
+					};
+					led@8,1 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x02>;
+						label = "vexpress:1";
+						linux,default-trigger = "mmc0";
+						default-state = "off";
+					};
+					led@8,2 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x04>;
+						label = "vexpress:2";
+						linux,default-trigger = "cpu0";
+						default-state = "off";
+					};
+					led@8,3 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x08>;
+						label = "vexpress:3";
+						linux,default-trigger = "cpu1";
+						default-state = "off";
+					};
+					led@8,4 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x10>;
+						label = "vexpress:4";
+						linux,default-trigger = "cpu2";
+						default-state = "off";
+					};
+					led@8,5 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x20>;
+						label = "vexpress:5";
+						linux,default-trigger = "cpu3";
+						default-state = "off";
+					};
+					led@8,6 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x40>;
+						label = "vexpress:6";
+						default-state = "off";
+					};
+					led@8,7 {
+						compatible = "register-bit-led";
+						reg = <0x08 0x04>;
+						offset = <0x08>;
+						mask = <0x80>;
+						label = "vexpress:7";
+						default-state = "off";
+					};
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <5>;
+					/* cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>; */
+					max-frequency = <12000000>;
+					vmmc-supply = <&mb_fixed_3v3>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x10000>;
+					interrupts = <7>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x10000>;
+					interrupts = <9>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x10000>;
+					interrupts = <9>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x10000>;
+					interrupts = <0>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				iofpga_gpio0: gpio@1d0000 {
+					compatible = "arm,pl061", "arm,primecell";
+					reg = <0x1d0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
new file mode 100644
index 000000000..dd9ea69f0
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
@@ -0,0 +1,27 @@
+#include "juno-r1.dts"
+#include "juno-scmi.dtsi"
+
+/ {
+	funnel@20130000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etf@20140000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20150000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+};
+
+&cti_sys2 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&A57_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A57_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
new file mode 100644
index 000000000..1d90eeebb
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -0,0 +1,344 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
+
+/ {
+	model = "ARM Juno development board (r1)";
+	compatible = "arm,juno-r1", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		A57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+		};
+
+		A57_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu-a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&memtimer {
+	status = "okay";
+};
+
+&pcie_ctlr {
+	status = "okay";
+};
+
+&smmu_pcie {
+	status = "okay";
+};
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
+
+&etf0_out_port {
+	remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&csys2_funnel_out_port>;
+};
+
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&csys1_funnel_in_port0>;
+};
+
+&cpu_debug0 {
+	cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};
+
+&cti0 {
+	cpu = <&A57_0>;
+};
+
+&cti1 {
+	cpu = <&A57_1>;
+};
+
+&cti2 {
+	cpu = <&A53_0>;
+};
+
+&cti3 {
+	cpu = <&A53_1>;
+};
+
+&cti4 {
+	cpu = <&A53_2>;
+};
+
+&cti5 {
+	cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
new file mode 100644
index 000000000..de2cbac1d
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
@@ -0,0 +1,27 @@
+#include "juno-r2.dts"
+#include "juno-scmi.dtsi"
+
+/ {
+	funnel@20130000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etf@20140000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20150000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+};
+
+&cti_sys2 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&A72_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A72_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
new file mode 100644
index 000000000..d2ada69b0
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -0,0 +1,350 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include "juno-base.dtsi"
+#include "juno-cs-r1r2.dtsi"
+
+/ {
+	model = "ARM Juno development board (r2)";
+	compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A72_0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <450>;
+		};
+
+		A72_1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <450>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <485>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A72_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu-a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A72_0>,
+				     <&A72_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&memtimer {
+	status = "okay";
+};
+
+&pcie_ctlr {
+	status = "okay";
+};
+
+&smmu_pcie {
+	status = "okay";
+};
+
+&etm0 {
+	cpu = <&A72_0>;
+};
+
+&etm1 {
+	cpu = <&A72_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&big_cluster_thermal_zone {
+	status = "okay";
+};
+
+&little_cluster_thermal_zone {
+	status = "okay";
+};
+
+&gpu0_thermal_zone {
+	status = "okay";
+};
+
+&gpu1_thermal_zone {
+	status = "okay";
+};
+
+&etf0_out_port {
+	remote-endpoint = <&csys2_funnel_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&csys2_funnel_out_port>;
+};
+
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&csys1_funnel_in_port0>;
+};
+
+&cpu_debug0 {
+	cpu = <&A72_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A72_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};
+
+&cti0 {
+	cpu = <&A72_0>;
+};
+
+&cti1 {
+	cpu = <&A72_1>;
+};
+
+&cti2 {
+	cpu = <&A53_0>;
+};
+
+&cti3 {
+	cpu = <&A53_1>;
+};
+
+&cti4 {
+	cpu = <&A53_2>;
+};
+
+&cti5 {
+	cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dts b/arch/arm64/boot/dts/arm/juno-scmi.dts
new file mode 100644
index 000000000..41588fa46
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dts
@@ -0,0 +1,9 @@
+#include "juno.dts"
+#include "juno-scmi.dtsi"
+
+&A57_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A57_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
new file mode 100644
index 000000000..ec85cd2c7
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -0,0 +1,223 @@
+/ {
+	etf@20010000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	tpiu@20030000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20040000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etr@20070000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	stm@20100000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	replicator@20120000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@220c0000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@230c0000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	hdlcd@7ff50000 {
+		clocks = <&scmi_clk 3>;
+	};
+
+	hdlcd@7ff60000 {
+		clocks = <&scmi_clk 3>;
+	};
+
+	/delete-node/ scpi;
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mailbox 0 0 &mailbox 0 1>;
+			shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+				mbox-names = "tx", "rx";
+				mboxes = <&mailbox 1 0 &mailbox 1 1>;
+				shmem = <&cpu_scp_hpri0 &cpu_scp_hpri1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_sensors0: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	thermal-zones {
+		pmic {
+			thermal-sensors = <&scmi_sensors0 0>;
+		};
+
+		soc {
+			thermal-sensors = <&scmi_sensors0 3>;
+		};
+
+		big-cluster {
+			thermal-sensors = <&scmi_sensors0 21>;
+		};
+
+		little-cluster {
+			thermal-sensors = <&scmi_sensors0 22>;
+		};
+
+		gpu0 {
+			thermal-sensors = <&scmi_sensors0 23>;
+		};
+
+		gpu1 {
+			thermal-sensors = <&scmi_sensors0 24>;
+		};
+	};
+
+};
+
+&A53_0 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_1 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_2 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_3 {
+	clocks = <&scmi_dvfs 1>;
+};
+
+&cpu_debug0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug5 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&etm0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm5 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&cti0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti5 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti_sys0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cti_sys1 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&gpu {
+	clocks = <&scmi_dvfs 2>;
+	power-domains = <&scmi_devpd 9>;
+};
+
+&mailbox {
+	compatible = "arm,mhu-doorbell", "arm,primecell";
+	#mbox-cells = <2>;
+};
+
+&smmu_etr {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&smmu_gpu {
+	power-domains = <&scmi_devpd 9>;
+};
+
+&sram {
+	/delete-node/ scp-sram@0;
+	/delete-node/ scp-sram@200;
+
+	cpu_scp_lpri0: scp-sram@0 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x0 0x80>;
+	};
+
+	cpu_scp_lpri1: scp-sram@80 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x80 0x80>;
+	};
+
+	cpu_scp_hpri0: scp-sram@100 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x100 0x80>;
+	};
+
+	cpu_scp_hpri1: scp-sram@180 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x180 0x80>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
new file mode 100644
index 000000000..5e48a01a5
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -0,0 +1,326 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2013-2014 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include "juno-base.dtsi"
+
+/ {
+	model = "ARM Juno development board (r0)";
+	compatible = "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <530>;
+		};
+
+		A57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <530>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <578>;
+			dynamic-power-coefficient = <140>;
+		};
+
+		A57_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu-a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>;
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+};
+
+&etm0 {
+	cpu = <&A57_0>;
+};
+
+&etm1 {
+	cpu = <&A57_1>;
+};
+
+&etm2 {
+	cpu = <&A53_0>;
+};
+
+&etm3 {
+	cpu = <&A53_1>;
+};
+
+&etm4 {
+	cpu = <&A53_2>;
+};
+
+&etm5 {
+	cpu = <&A53_3>;
+};
+
+&etf0_out_port {
+	remote-endpoint = <&replicator_in_port0>;
+};
+
+&replicator_in_port0 {
+	remote-endpoint = <&etf0_out_port>;
+};
+
+&stm_out_port {
+	remote-endpoint = <&main_funnel_in_port2>;
+};
+
+&main_funnel_in_ports {
+	port@2 {
+		reg = <2>;
+		main_funnel_in_port2: endpoint {
+			remote-endpoint = <&stm_out_port>;
+		};
+	};
+};
+
+&cpu_debug0 {
+	cpu = <&A57_0>;
+};
+
+&cpu_debug1 {
+	cpu = <&A57_1>;
+};
+
+&cpu_debug2 {
+	cpu = <&A53_0>;
+};
+
+&cpu_debug3 {
+	cpu = <&A53_1>;
+};
+
+&cpu_debug4 {
+	cpu = <&A53_2>;
+};
+
+&cpu_debug5 {
+	cpu = <&A53_3>;
+};
+
+&cti0 {
+	cpu = <&A57_0>;
+};
+
+&cti1 {
+	cpu = <&A57_1>;
+};
+
+&cti2 {
+	cpu = <&A53_0>;
+};
+
+&cti3 {
+	cpu = <&A53_1>;
+};
+
+&cti4 {
+	cpu = <&A53_2>;
+};
+
+&cti5 {
+	cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
new file mode 100644
index 000000000..afdf95420
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+#include "rtsm_ve-motherboard.dtsi"
+
+/ {
+	model = "RTSM_VE_AEMv8A";
+	compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2,00000000 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x00000000 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	panel {
+		compatible = "arm,rtsm-display";
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&clcd_pads>;
+			};
+		};
+	};
+
+	bus@8000000 {
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
new file mode 100644
index 000000000..ec2d5280a
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * "rs2" extension for the v2m motherboard
+ */
+/ {
+	bus@8000000 {
+		motherboard-bus@8000000 {
+			arm,v2m-memory-map = "rs2";
+
+			iofpga-bus@300000000 {
+				virtio@140000 {
+					compatible = "virtio,mmio";
+					reg = <0x140000 0x200>;
+					interrupts = <43>;
+				};
+
+				virtio@150000 {
+					compatible = "virtio,mmio";
+					reg = <0x150000 0x200>;
+					interrupts = <44>;
+				};
+
+				virtio@200000 {
+					compatible = "virtio,mmio";
+					reg = <0x200000 0x200>;
+					interrupts = <46>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
new file mode 100644
index 000000000..ba8beef3f
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+/ {
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	v2m_fixed_3v3: v2m-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	mcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		v2m_oscclk1: oscclk1 {
+			/* CLCD clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <23750000 63500000>;
+			#clock-cells = <0>;
+			clock-output-names = "v2m:oscclk1";
+		};
+
+		reset {
+			compatible = "arm,vexpress-reset";
+			arm,vexpress-sysreg,func = <5 0>;
+		};
+
+		muxfpga {
+			compatible = "arm,vexpress-muxfpga";
+			arm,vexpress-sysreg,func = <7 0>;
+		};
+
+		shutdown {
+			compatible = "arm,vexpress-shutdown";
+			arm,vexpress-sysreg,func = <8 0>;
+		};
+
+		reboot {
+			compatible = "arm,vexpress-reboot";
+			arm,vexpress-sysreg,func = <9 0>;
+		};
+
+		dvimode {
+			compatible = "arm,vexpress-dvimode";
+			arm,vexpress-sysreg,func = <11 0>;
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
+
+			flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan91c111";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x210000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&v2m_clk24mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_sysreg 0 0>;
+					wp-gpios = <&v2m_sysreg 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				virtio@130000 {
+					compatible = "virtio,mmio";
+					reg = <0x130000 0x200>;
+					interrupts = <42>;
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&v2m_clk24mhz>;
+					clock-names = "apb_pclk";
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+					clock-names = "clcdclk", "apb_pclk";
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&panel_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
new file mode 100644
index 000000000..8db4243a4
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * LogicTile Express 20MG
+ * V2F-1XV7
+ *
+ * Cortex-A53 (2 cores) Soft Macrocell Model
+ *
+ * HBI-0247C
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "arm/arm/vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2F-1XV7 Cortex-A53x2 SMM";
+	arm,hbi = <0x247>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2f-1xv7,ca53x2", "arm,vexpress,v2f-1xv7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		stdout-path = "serial0:38400n8";
+	};
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x80000000>; /* 2GB @ 2GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0 0x18000000 0 0x00800000>;
+			no-map;
+		};
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		smbclk: smclk {
+			/* SMC clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "smclk";
+		};
+
+		volt-vio {
+			/* VIO to expansion board above */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VIO_UP";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		volt-12v {
+			/* 12V from power connector J6 */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "12";
+			regulator-always-on;
+		};
+
+		temp-fpga {
+			/* FPGA temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "FPGA";
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/bitmain/Makefile b/arch/arm64/boot/dts/bitmain/Makefile
new file mode 100644
index 000000000..be90a6071
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+dtb-$(CONFIG_ARCH_BITMAIN) += bm1880-sophon-edge.dtb
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
new file mode 100644
index 000000000..7a2c7f9c2
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bm1880.dtsi"
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "sophon-edge-schematics"
+ * version, 1.0210.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+/ {
+	compatible = "bitmain,sophon-edge", "bitmain,bm1880";
+	model = "Sophon Edge";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
+	};
+
+	soc {
+		gpio0: gpio@50027000 {
+			porta: gpio-controller@0 {
+				gpio-line-names =
+					"GPIO-A", /* GPIO0, LSEC pin 23 */
+					"GPIO-C", /* GPIO1, LSEC pin 25 */
+					"[GPIO2_PHY0_RST]", /* GPIO2 */
+					"GPIO-E", /* GPIO3, LSEC pin 27 */
+					"[USB_DET]", /* GPIO4 */
+					"[EN_P5V]", /* GPIO5 */
+					"[VDDIO_MS1_SEL]", /* GPIO6 */
+					"GPIO-G", /* GPIO7, LSEC pin 29 */
+					"[BM_TUSB_RST_L]", /* GPIO8 */
+					"[EN_P5V_USBHUB]", /* GPIO9 */
+					"NC",
+					"LED_WIFI", /* GPIO11 */
+					"LED_BT", /* GPIO12 */
+					"[BM_BLM8221_EN_L]", /* GPIO13 */
+					"NC", /* GPIO14 */
+					"NC", /* GPIO15 */
+					"NC", /* GPIO16 */
+					"NC", /* GPIO17 */
+					"NC", /* GPIO18 */
+					"NC", /* GPIO19 */
+					"NC", /* GPIO20 */
+					"NC", /* GPIO21 */
+					"NC", /* GPIO22 */
+					"NC", /* GPIO23 */
+					"NC", /* GPIO24 */
+					"NC", /* GPIO25 */
+					"NC", /* GPIO26 */
+					"NC", /* GPIO27 */
+					"NC", /* GPIO28 */
+					"NC", /* GPIO29 */
+					"NC", /* GPIO30 */
+					"NC"; /* GPIO31 */
+			};
+		};
+
+		gpio1: gpio@50027400 {
+			portb: gpio-controller@0 {
+				gpio-line-names =
+					"NC", /* GPIO32 */
+					"NC", /* GPIO33 */
+					"[I2C0_SDA]", /* GPIO34, LSEC pin 17 */
+					"[I2C0_SCL]", /* GPIO35, LSEC pin 15 */
+					"[JTAG0_TDO]", /* GPIO36 */
+					"[JTAG0_TCK]", /* GPIO37 */
+					"[JTAG0_TDI]", /* GPIO38 */
+					"[JTAG0_TMS]", /* GPIO39 */
+					"[JTAG0_TRST_X]", /* GPIO40 */
+					"[JTAG1_TDO]", /* GPIO41 */
+					"[JTAG1_TCK]", /* GPIO42 */
+					"[JTAG1_TDI]", /* GPIO43 */
+					"[CPU_TX]", /* GPIO44 */
+					"[CPU_RX]", /* GPIO45 */
+					"[UART1_TXD]", /* GPIO46 */
+					"[UART1_RXD]", /* GPIO47 */
+					"[UART0_TXD]", /* GPIO48 */
+					"[UART0_RXD]", /* GPIO49 */
+					"GPIO-I", /* GPIO50, LSEC pin 31 */
+					"GPIO-K", /* GPIO51, LSEC pin 33 */
+					"USER_LED2", /* GPIO52 */
+					"USER_LED1", /* GPIO53 */
+					"[UART0_RTS]", /* GPIO54 */
+					"[UART0_CTS]", /* GPIO55 */
+					"USER_LED4", /* GPIO56, JTAG1_TRST_X */
+					"USER_LED3", /* GPIO57, JTAG1_TMS */
+					"[I2S0_SCLK]", /* GPIO58 */
+					"[I2S0_FS]", /* GPIO59 */
+					"[I2S0_SDI]", /* GPIO60 */
+					"[I2S0_SDO]", /* GPIO61 */
+					"GPIO-B", /* GPIO62, LSEC pin 24 */
+					"GPIO-F"; /* GPIO63, I2S1_SCLK, LSEC pin 28 */
+			};
+		};
+
+		gpio2: gpio@50027800 {
+			portc: gpio-controller@0 {
+				gpio-line-names =
+					"GPIO-D", /* GPIO64, I2S1_FS, LSEC pin 26 */
+					"GPIO-J", /* GPIO65, I2S1_SDI, LSEC pin 32 */
+					"GPIO-H", /* GPIO66, I2S1_SDO, LSEC pin 30 */
+					"GPIO-L", /* GPIO67, LSEC pin 34 */
+					"[SPI0_CS]", /* GPIO68, SPI1_CS, LSEC pin 12 */
+					"[SPI0_DIN]", /* GPIO69, SPI1_SDI, LSEC pin 10 */
+					"[SPI0_DOUT]", /* GPIO70, SPI1_SDO, LSEC pin 14 */
+					"[SPI0_SCLK]"; /* GPIO71, SPI1_SCK, LSEC pin 8 */
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl_uart0_default: pinctrl-uart0-default {
+		pinmux {
+			groups = "uart0_grp";
+			function = "uart0";
+		};
+	};
+
+	pinctrl_uart1_default: pinctrl-uart1-default {
+		pinmux {
+			groups = "uart1_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_uart2_default: pinctrl-uart2-default {
+		pinmux {
+			groups = "uart2_grp";
+			function = "uart2";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_default>;
+};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
new file mode 100644
index 000000000..53a9b7605
--- /dev/null
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#include <dt-bindings/clock/bm1880-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/bitmain,bm1880-reset.h>
+
+/ {
+	compatible = "bitmain,bm1880";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@100000000 {
+			reg = <0x1 0x00000000 0x0 0x20000>;
+			no-map;
+		};
+
+		jpu@130000000 {
+			reg = <0x1 0x30000000 0x0 0x08000000>; // 128M
+			no-map;
+		};
+
+		vpu@138000000 {
+			reg = <0x1 0x38000000 0x0 0x08000000>; // 128M
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	osc: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@50001000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0x50001000 0x0 0x1000>,
+			      <0x0 0x50002000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		sctrl: system-controller@50010000 {
+			compatible = "bitmain,bm1880-sctrl", "syscon",
+				     "simple-mfd";
+			reg = <0x0 0x50010000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x50010000 0x1000>;
+
+			pinctrl: pinctrl@400 {
+				compatible = "bitmain,bm1880-pinctrl";
+				reg = <0x400 0x120>;
+			};
+
+			clk: clock-controller@e8 {
+				compatible = "bitmain,bm1880-clk";
+				reg = <0xe8 0x0c>, <0x800 0xb0>;
+				reg-names = "pll", "sys";
+				clocks = <&osc>;
+				clock-names = "osc";
+				#clock-cells = <1>;
+			};
+
+			rst: reset-controller@c00 {
+				compatible = "bitmain,bm1880-reset";
+				reg = <0xc00 0x8>;
+				#reset-cells = <1>;
+			};
+		};
+
+		gpio0: gpio@50027000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027000 0x0 0x400>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@50027400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027400 0x0 0x400>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@50027800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027800 0x0 0x400>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@58018000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_CLK>;
+			status = "disabled";
+		};
+
+		uart1: serial@5801A000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART0_1_ACLK>;
+			status = "disabled";
+		};
+
+		uart2: serial@5801C000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_CLK>;
+			status = "disabled";
+		};
+
+		uart3: serial@5801E000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst BM1880_RST_UART2_3_ACLK>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
new file mode 100644
index 000000000..8b4591ddd
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS := -@
+
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
+			      bcm2711-rpi-4-b.dtb \
+			      bcm2711-rpi-cm4-io.dtb \
+			      bcm2837-rpi-3-a-plus.dtb \
+			      bcm2837-rpi-3-b.dtb \
+			      bcm2837-rpi-3-b-plus.dtb \
+			      bcm2837-rpi-cm3-io3.dtb \
+			      bcm2837-rpi-zero-2-w.dtb
+
+subdir-y	+= bcmbca
+subdir-y	+= northstar2
+subdir-y	+= stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
new file mode 100644
index 000000000..c7280bdef
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2711-rpi-4-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 000000000..d9d2852b7
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2711-rpi-400.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000..8810322aa
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2711-rpi-cm4-io.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 000000000..17d778a7e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-3-a-plus.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000..0cf6240b6
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-3-b-plus.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000..f429468fd
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-3-b.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000..3fa21bd16
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-cm3-io3.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000..363381a0c
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/broadcom/bcm2837-rpi-zero-2-w.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
new file mode 100644
index 000000000..27741b71b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+				bcm4906-netgear-r8000p.dtb \
+				bcm4906-tplink-archer-c2300-v1.dtb \
+				bcm4908-asus-gt-ac5300.dtb \
+				bcm4908-netgear-raxe500.dtb \
+				bcm94908.dtb \
+				bcm4912-asus-gt-ax6000.dtb \
+				bcm94912.dtb \
+				bcm963158.dtb \
+				bcm96858.dtb \
+				bcm963146.dtb \
+				bcm96856.dtb \
+				bcm96813.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
new file mode 100644
index 000000000..78204d71e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Netgear R8000P";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			function = "2ghz";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-1 {
+			function = "5ghz-1";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-2 {
+			function = "5ghz-2";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			function = "usb2";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			function = "usb3";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wifi {
+			function = "wifi";
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x100000>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			label = "firmware";
+			reg = <0x100000 0x4400000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
new file mode 100644
index 000000000..fcf092c81
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4906.dtsi"
+
+/ {
+	compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
+	model = "TP-Link Archer C2300 V1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			function = "2ghz";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			function = "5ghz";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-blue {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			function = LED_FUNCTION_WPS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			function = "usb2";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			function = "usb3";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-brightness {
+			function = LED_FUNCTION_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-brightness {
+			label = "LEDs";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wifi {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "cferom";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x3900000>;
+		};
+
+		partition@5800000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x3a00000 0x3900000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
new file mode 100644
index 000000000..d084c33d5
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	cpus {
+		/delete-node/ cpu@2;
+
+		/delete-node/ cpu@3;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
new file mode 100644
index 000000000..d94a53d68
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Asus GT-AC5300";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-wifi {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		key-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		};
+
+		key-brightness {
+			label = "LEDs";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&enet {
+	nvmem-cells = <&base_mac_addr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+	brcm,ioc = <1>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan2";
+	};
+
+	port@1 {
+		label = "lan1";
+	};
+
+	port@2 {
+		label = "lan6";
+	};
+
+	port@3 {
+		label = "lan5";
+	};
+
+	/* External BCM53134S switch */
+	port@7 {
+		label = "sw";
+		reg = <7>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+		};
+	};
+};
+
+&mdio {
+	/* lan8 */
+	ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	/* lan7 */
+	ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* lan4 */
+	ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	/* lan3 */
+	ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&leds {
+	led@11 {
+		reg = <0x11>;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_WHITE>;
+		default-state = "on";
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_17_a>;
+	};
+
+	led@12 {
+		reg = <0x12>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_RED>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_18_a>;
+	};
+
+	led@14 {
+		reg = <0x14>;
+		function = LED_FUNCTION_WPS;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_20_a>;
+	};
+
+	led@15 {
+		reg = <0x15>;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_WHITE>;
+		active-low;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_21_a>;
+	};
+
+	led@19 {
+		reg = <0x19>;
+		function = LED_FUNCTION_LAN;
+		color = <LED_COLOR_ID_WHITE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_led_25_a>;
+	};
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	nand-on-flash-bbt;
+	brcm,nand-has-wp;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	partitions {
+		compatible = "brcm,bcm4908-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			compatible = "nvmem-cells";
+			label = "cferom";
+			reg = <0x0 0x100000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x100000>;
+
+			base_mac_addr: mac@106a0 {
+				reg = <0x106a0 0x6>;
+			};
+		};
+
+		partition@100000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x100000 0x5700000>;
+		};
+
+		partition@5800000 {
+			compatible = "brcm,bcm4908-firmware";
+			reg = <0x5800000 0x5700000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
new file mode 100644
index 000000000..23b96c663
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "bcm4908.dtsi"
+
+/ {
+	compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
+	model = "Netgear RAXE500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&ports {
+	port@0 {
+		label = "lan4";
+	};
+
+	port@1 {
+		label = "lan3";
+	};
+
+	port@2 {
+		label = "lan2";
+	};
+
+	port@3 {
+		label = "lan1";
+	};
+
+	port@7 {
+		reg = <7>;
+		phy-mode = "internal";
+		phy-handle = <&phy12>;
+		label = "wan";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
new file mode 100644
index 000000000..2f124b027
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
+
+/dts-v1/;
+
+/ {
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b53";
+			reg = <0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0xfff8>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x81000000 0x4000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x2000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	clocks {
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x80000000 0x281000>;
+
+		enet: ethernet@2000 {
+			compatible = "brcm,bcm4908-enet";
+			reg = <0x2000 0x1000>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
+		};
+
+		usb_phy: usb-phy@c200 {
+			compatible = "brcm,bcm4908-usb-phy";
+			reg = <0xc200 0x100>;
+			reg-names = "ctrl";
+			power-domains = <&pmb BCM_PMB_HOST_USB>;
+			dr_mode = "host";
+			brcm,has-xhci;
+			brcm,has-eohci;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: usb@c300 {
+			compatible = "generic-ehci";
+			reg = <0xc300 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB2>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ehci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ehci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		ohci: usb@c400 {
+			compatible = "generic-ohci";
+			reg = <0xc400 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB2>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ohci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			ohci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		xhci: usb@d000 {
+			compatible = "generic-xhci";
+			reg = <0xd000 0x8c8>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb_phy PHY_TYPE_USB3>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xhci_port1: port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			xhci_port2: port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+		};
+
+		bus@80000 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0 0x80000 0x50000>;
+
+			ethernet-switch@0 {
+				compatible = "brcm,bcm4908-switch";
+				reg = <0x0 0x40000>,
+				      <0x40000 0x110>,
+				      <0x40340 0x30>,
+				      <0x40380 0x30>,
+				      <0x40600 0x34>,
+				      <0x40800 0x208>;
+				reg-names = "core", "reg", "intrl2_0",
+					    "intrl2_1", "fcb", "acb";
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				brcm,num-gphy = <5>;
+				brcm,num-rgmii-ports = <2>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports: ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						phy-mode = "internal";
+						phy-handle = <&phy8>;
+					};
+
+					port@1 {
+						reg = <1>;
+						phy-mode = "internal";
+						phy-handle = <&phy9>;
+					};
+
+					port@2 {
+						reg = <2>;
+						phy-mode = "internal";
+						phy-handle = <&phy10>;
+					};
+
+					port@3 {
+						reg = <3>;
+						phy-mode = "internal";
+						phy-handle = <&phy11>;
+					};
+
+					port@8 {
+						reg = <8>;
+						phy-mode = "internal";
+						ethernet = <&enet>;
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+
+			mdio: mdio@405c0 {
+				compatible = "brcm,unimac-mdio";
+				reg = <0x405c0 0x8>;
+				reg-names = "mdio";
+				#size-cells = <0>;
+				#address-cells = <1>;
+
+				phy8: ethernet-phy@8 {
+					reg = <8>;
+				};
+
+				phy9: ethernet-phy@9 {
+					reg = <9>;
+				};
+
+				phy10: ethernet-phy@a {
+					reg = <10>;
+				};
+
+				phy11: ethernet-phy@b {
+					reg = <11>;
+				};
+
+				phy12: ethernet-phy@c {
+					reg = <12>;
+				};
+			};
+		};
+
+		procmon: bus@280000 {
+			compatible = "simple-bus";
+			reg = <0x280000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmb: power-controller@2800c0 {
+				compatible = "brcm,bcm4908-pmb";
+				reg = <0x2800c0 0x40>;
+				#power-domain-cells = <1>;
+			};
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0xff800000 0x3000>;
+
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
+		gpio0: gpio-controller@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg-names = "dirout", "dat";
+			reg = <0x500 0x28>, <0x528 0x28>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		pinctrl@560 {
+			compatible = "brcm,bcm4908-pinctrl";
+			reg = <0x560 0x10>;
+
+			pins_led_0_a: led_0-a-pins {
+				function = "led_0";
+				groups = "led_0_grp_a";
+			};
+
+			pins_led_1_a: led_1-a-pins {
+				function = "led_1";
+				groups = "led_1_grp_a";
+			};
+
+			pins_led_2_a: led_2-a-pins {
+				function = "led_2";
+				groups = "led_2_grp_a";
+			};
+
+			pins_led_3_a: led_3-a-pins {
+				function = "led_3";
+				groups = "led_3_grp_a";
+			};
+
+			pins_led_4_a: led_4-a-pins {
+				function = "led_4";
+				groups = "led_4_grp_a";
+			};
+
+			pins_led_5_a: led_5-a-pins {
+				function = "led_5";
+				groups = "led_5_grp_a";
+			};
+
+			pins_led_6_a: led_6-a-pins {
+				function = "led_6";
+				groups = "led_6_grp_a";
+			};
+
+			pins_led_7_a: led_7-a-pins {
+				function = "led_7";
+				groups = "led_7_grp_a";
+			};
+
+			pins_led_8_a: led_8-a-pins {
+				function = "led_8";
+				groups = "led_8_grp_a";
+			};
+
+			pins_led_9_a: led_9-a-pins {
+				function = "led_9";
+				groups = "led_9_grp_a";
+			};
+
+			pins_led_10_a: led_10-a-pins {
+				function = "led_10";
+				groups = "led_10_grp_a";
+			};
+
+			pins_led_11_a: led_11-a-pins {
+				function = "led_11";
+				groups = "led_11_grp_a";
+			};
+
+			pins_led_12_a: led_12-a-pins {
+				function = "led_12";
+				groups = "led_12_grp_a";
+			};
+
+			pins_led_13_a: led_13-a-pins {
+				function = "led_13";
+				groups = "led_13_grp_a";
+			};
+
+			pins_led_14_a: led_14-a-pins {
+				function = "led_14";
+				groups = "led_14_grp_a";
+			};
+
+			pins_led_15_a: led_15-a-pins {
+				function = "led_15";
+				groups = "led_15_grp_a";
+			};
+
+			pins_led_16_a: led_16-a-pins {
+				function = "led_16";
+				groups = "led_16_grp_a";
+			};
+
+			pins_led_17_a: led_17-a-pins {
+				function = "led_17";
+				groups = "led_17_grp_a";
+			};
+
+			pins_led_18_a: led_18-a-pins {
+				function = "led_18";
+				groups = "led_18_grp_a";
+			};
+
+			pins_led_19_a: led_19-a-pins {
+				function = "led_19";
+				groups = "led_19_grp_a";
+			};
+
+			pins_led_20_a: led_20-a-pins {
+				function = "led_20";
+				groups = "led_20_grp_a";
+			};
+
+			pins_led_21_a: led_21-a-pins {
+				function = "led_21";
+				groups = "led_21_grp_a";
+			};
+
+			pins_led_22_a: led_22-a-pins {
+				function = "led_22";
+				groups = "led_22_grp_a";
+			};
+
+			pins_led_23_a: led_23-a-pins {
+				function = "led_23";
+				groups = "led_23_grp_a";
+			};
+
+			pins_led_24_a: led_24-a-pins {
+				function = "led_24";
+				groups = "led_24_grp_a";
+			};
+
+			pins_led_25_a: led_25-a-pins {
+				function = "led_25";
+				groups = "led_25_grp_a";
+			};
+
+			pins_led_26_a: led_26-a-pins {
+				function = "led_26";
+				groups = "led_26_grp_a";
+			};
+
+			pins_led_27_a: led_27-a-pins {
+				function = "led_27";
+				groups = "led_27_grp_a";
+			};
+
+			pins_led_28_a: led_28-a-pins {
+				function = "led_28";
+				groups = "led_28_grp_a";
+			};
+
+			pins_led_29_a: led_29-a-pins {
+				function = "led_29";
+				groups = "led_29_grp_a";
+			};
+
+			pins_led_30_a: led_30-a-pins {
+				function = "led_30";
+				groups = "led_30_grp_a";
+			};
+
+			pins_led_31_a: led_31-a-pins {
+				function = "led_31";
+				groups = "led_31_grp_a";
+			};
+
+			pins_hs_uart: hs_uart-pins {
+				function = "hs_uart";
+				groups = "hs_uart_grp";
+			};
+
+			pins_i2c_a: i2c-a-pins {
+				function = "i2c";
+				groups = "i2c_grp_a";
+			};
+
+			pins_i2c_b: i2c-b-pins {
+				function = "i2c";
+				groups = "i2c_grp_b";
+			};
+
+			pins_i2s: i2s-pins {
+				function = "i2s";
+				groups = "i2s_grp";
+			};
+
+			pins_nand_ctrl: nand_ctrl-pins {
+				function = "nand_ctrl";
+				groups = "nand_ctrl_grp";
+			};
+
+			pins_nand_data: nand_data-pins {
+				function = "nand_data";
+				groups = "nand_data_grp";
+			};
+
+			pins_emmc_ctrl: emmc_ctrl-pins {
+				function = "emmc_ctrl";
+				groups = "emmc_ctrl_grp";
+			};
+
+			pins_usb0_pwr: usb0_pwr-pins {
+				function = "usb0_pwr";
+				groups = "usb0_pwr_grp";
+			};
+
+			pins_usb1_pwr: usb1_pwr-pins {
+				function = "usb1_pwr";
+				groups = "usb1_pwr_grp";
+			};
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "okay";
+		};
+
+		leds: leds@800 {
+			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+			status = "okay";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		i2c@2100 {
+			compatible = "brcm,brcmper-i2c";
+			reg = <0x2100 0x58>;
+			clock-frequency = <97500>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_i2c_a>;
+			status = "disabled";
+		};
+
+		misc@2600 {
+			compatible = "brcm,misc", "simple-mfd";
+			reg = <0x2600 0xe4>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00 0x2600 0xe4>;
+
+			reset-controller@2644 {
+				compatible = "brcm,bcm4908-misc-pcie-reset";
+				reg = <0x44 0x04>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&twd>;
+		offset = <0x34>;
+		mask = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
new file mode 100644
index 000000000..ed554666e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912-asus-gt-ax6000.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	compatible = "asus,gt-ax6000", "brcm,bcm4912", "brcm,bcmbca";
+	model = "Asus GT-AX6000";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00 0x00 0x00 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
new file mode 100644
index 000000000..d658c81f7
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm4912", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
new file mode 100644
index 000000000..4f474d470
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63146", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
new file mode 100644
index 000000000..909f254dc
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm63158", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
new file mode 100644
index 000000000..685ae3295
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6813", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
new file mode 100644
index 000000000..820553ce5
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6856", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
new file mode 100644
index 000000000..0eb93c298
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,bcm6858", "brcm,bcmbca";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		B53_0: cpu@0 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_1: cpu@1 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_2: cpu@2 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B53_3: cpu@3 {
+			compatible = "brcm,brahma-b53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B53_0>, <&B53_1>,
+			<&B53_2>, <&B53_3>;
+	};
+
+	clocks: clocks {
+		periph_clk:periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, /* GICD */
+				<0x2000 0x2000>, /* GICC */
+				<0x4000 0x2000>, /* GICH */
+				<0x6000 0x2000>; /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xff800000 0x62000>;
+
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			timer@0 {
+				compatible = "brcm,bcm63138-timer";
+				reg = <0x0 0x28>;
+			};
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x18>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
new file mode 100644
index 000000000..c4e6e71f6
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4908.dtsi"
+
+/ {
+	model = "Broadcom BCM94908 Reference Board";
+	compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
new file mode 100644
index 000000000..e69cd6832
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm4912.dtsi"
+
+/ {
+	model = "Broadcom BCM94912 Reference Board";
+	compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
new file mode 100644
index 000000000..db2c82d6d
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63146.dtsi"
+
+/ {
+	model = "Broadcom BCM963146 Reference Board";
+	compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
new file mode 100644
index 000000000..25c12bc63
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63158.dtsi"
+
+/ {
+	model = "Broadcom BCM963158 Reference Board";
+	compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
new file mode 100644
index 000000000..faba21f03
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6813.dtsi"
+
+/ {
+	model = "Broadcom BCM96813 Reference Board";
+	compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
new file mode 100644
index 000000000..9808331ee
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6856.dtsi"
+
+/ {
+	model = "Broadcom BCM96856 Reference Board";
+	compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
new file mode 100644
index 000000000..1f561c8e1
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+	model = "Broadcom BCM96858 Reference Board";
+	compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/Makefile b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
new file mode 100644
index 000000000..601e1e631
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-xmc.dtb
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
new file mode 100644
index 000000000..99009fdf1
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-clock.dtsi
@@ -0,0 +1,105 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-ns2.h>
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	lcpll_ddr: lcpll_ddr@6501d058 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ddr";
+		reg = <0x6501d058 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d04c 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+				     "ddr", "ddr_ch2_unused",
+				     "ddr_ch3_unused", "ddr_ch4_unused",
+				     "ddr_ch5_unused";
+	};
+
+	lcpll_ports: lcpll_ports@6501d078 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-lcpll-ports";
+		reg = <0x6501d078 0x20>,
+		      <0x6501c020 0x4>,
+		      <0x6501d054 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll_ports", "wan", "rgmii",
+				     "ports_ch2_unused",
+				     "ports_ch3_unused",
+				     "ports_ch4_unused",
+				     "ports_ch5_unused";
+	};
+
+	genpll_scr: genpll_scr@6501d098 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-scr";
+		reg = <0x6501d098 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_scr", "scr", "fs",
+				     "audio_ref", "scr_ch3_unused",
+				     "scr_ch4_unused", "scr_ch5_unused";
+	};
+
+	iprocmed: iprocmed {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <2>;
+		clock-mult = <1>;
+	};
+
+	iprocslow: iprocslow {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+		clock-div = <4>;
+		clock-mult = <1>;
+	};
+
+	genpll_sw: genpll_sw@6501d0c4 {
+		#clock-cells = <1>;
+		compatible = "brcm,ns2-genpll-sw";
+		reg = <0x6501d0c4 0x32>,
+		      <0x6501c020 0x4>,
+		      <0x6501d044 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll_sw", "rpe", "250", "nic",
+				     "chimp", "port", "sdio";
+	};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
new file mode 100644
index 000000000..fbf0392b8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -0,0 +1,236 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+	model = "Broadcom NS2 SVK";
+	compatible = "brcm,ns2-svk", "brcm,ns2";
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart0;
+		serial2 = &uart1;
+		serial3 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+};
+
+&enet {
+	status = "okay";
+};
+
+&pci_phy0 {
+	status = "okay";
+};
+
+&pci_phy1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie4 {
+	status = "okay";
+};
+
+&pcie8 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ssp0 {
+	status = "okay";
+
+	slic@0 {
+		compatible = "silabs,si3226x";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&ssp1 {
+	status = "okay";
+
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		at25,byte-len = <0x8000>;
+		at25,addr-mode = <2>;
+		at25,page-size = <64>;
+		spi-cpha;
+		spi-cpol;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,slave-tx-disable = <0>;
+		pl022,com-mode = <0>;
+		pl022,rx-level-trig = <1>;
+		pl022,tx-level-trig = <1>;
+		pl022,ctrl-len = <11>;
+		pl022,wait-state = <0>;
+		pl022,duplex = <0>;
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdio0 {
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			enet-phy-lane-swap;
+			reg = <0x10>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
new file mode 100644
index 000000000..1d314f17b
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -0,0 +1,191 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "ns2.dtsi"
+
+/ {
+	model = "Broadcom NS2 XMC";
+	compatible = "brcm,ns2-xmc", "brcm,ns2";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x66130000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000001 0x00000000>;
+	};
+};
+
+&enet {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00280000>; /*  2.5MB */
+			read-only;
+		};
+
+		partition@280000 {
+			label = "nenv";
+			reg = <0x00280000 0x00040000>; /* 0.25MB */
+			read-only;
+		};
+
+		partition@2c0000 {
+			label = "ndtb";
+			reg = <0x002c0000 0x00040000>; /* 0.25MB */
+			read-only;
+		};
+
+		partition@300000 {
+			label = "nsystem";
+			reg = <0x00300000 0x03d00000>; /*   61MB */
+			read-only;
+		};
+
+		partition@4000000 {
+			label = "nrootfs";
+			reg = <0x04000000 0x06400000>; /*  100MB */
+		};
+
+		partition@a400000 {
+			label = "ncustfs";
+			reg = <0x0a400000 0x35c00000>; /*  860MB */
+		};
+	};
+};
+
+&pci_phy0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie8 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&qspi {
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		spi-max-frequency = <62500000>;
+		m25p,default-addr-width = <3>;
+		reg = <0x0 0x0>;
+
+		partition@0 {
+			label = "bl0";
+			reg = <0x00000000 0x00080000>; /*  512KB */
+		};
+
+		partition@80000 {
+			label = "fip";
+			reg = <0x00080000 0x00150000>; /* 1344KB */
+		};
+
+		partition@1e0000 {
+			label = "env";
+			reg = <0x001e0000 0x00010000>;/*    64KB */
+		};
+
+		partition@1f0000 {
+			label = "dtb";
+			reg = <0x001f0000 0x00010000>; /*   64KB */
+		};
+
+		partition@200000 {
+			label = "kernel";
+			reg = <0x00200000 0x00e00000>; /*   14MB */
+		};
+
+		partition@1000000 {
+			label = "rootfs";
+			reg = <0x01000000 0x01000000>; /*   16MB */
+		};
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
new file mode 100644
index 000000000..9dcd25ec2
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -0,0 +1,765 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright (c) 2015 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/memreserve/ 0x81000000 0x00200000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/bcm-ns2.h>
+
+/ {
+	compatible = "brcm,ns2";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A57_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 0>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		A57_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 1>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		A57_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 2>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		A57_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0 3>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		CLUSTER0_L2: l2-cache@0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>,
+				     <&A57_2>,
+				     <&A57_3>;
+	};
+
+	pcie0: pcie@20020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x20020000 0 0x1000>;
+		dma-coherent;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x00000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		phys = <&pci_phy0>;
+		phy-names = "pcie-phy";
+
+		msi-parent = <&v2m0>;
+	};
+
+	pcie4: pcie@50020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x50020000 0 0x1000>;
+		dma-coherent;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <4>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x30000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		phys = <&pci_phy1>;
+		phy-names = "pcie-phy";
+
+		msi-parent = <&v2m0>;
+	};
+
+	pcie8: pcie@60c00000 {
+		compatible = "brcm,iproc-pcie-paxc";
+		reg = <0 0x60c00000 0 0x1000>;
+		dma-coherent;
+		linux,pci-domain = <8>;
+
+		bus-range = <0x0 0x1>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x60000000 0 0x00c00000>;
+
+		status = "disabled";
+
+		msi-parent = <&v2m0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		#include "ns2-clock.dtsi"
+
+		enet: ethernet@61000000 {
+			compatible = "brcm,ns2-amac";
+			reg = <0x61000000 0x1000>,
+			      <0x61090000 0x1000>,
+			      <0x61030000 0x100>;
+			reg-names = "amac_base", "idm_base", "nicpm_base";
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			phy-handle = <&gphy0>;
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		pdc0: iproc-pdc0@612c0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto0: crypto@612d0000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x612d0000 0x900>;
+			mboxes = <&pdc0 0>;
+		};
+
+		pdc1: iproc-pdc1@612e0000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto1: crypto@612f0000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x612f0000 0x900>;
+			mboxes = <&pdc1 0>;
+		};
+
+		pdc2: iproc-pdc2@61300000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto2: crypto@61310000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x61310000 0x900>;
+			mboxes = <&pdc2 0>;
+		};
+
+		pdc3: iproc-pdc3@61320000 {
+			compatible = "brcm,iproc-pdc-mbox";
+			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			dma-coherent;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+		};
+
+		crypto3: crypto@61330000 {
+			compatible = "brcm,spum-crypto";
+			reg = <0x61330000 0x900>;
+			mboxes = <&pdc3 0>;
+		};
+
+		dma0: dma-controller@61360000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x61360000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		smmu: iommu@64000000 {
+			compatible = "arm,mmu-500";
+			reg = <0x64000000 0x40000>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+		};
+
+		pinctrl: pinctrl@6501d130 {
+			compatible = "brcm,ns2-pinmux";
+			reg = <0x6501d130 0x08>,
+			      <0x660a0028 0x04>,
+			      <0x660009b0 0x40>;
+		};
+
+		gpio_aon: gpio@65024800 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x65024800 0x50>,
+			      <0x65024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		gic: interrupt-controller@65210000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x65210000 0x1000>,
+			      <0x65220000 0x1000>,
+			      <0x65240000 0x2000>,
+			      <0x65260000 0x1000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x652e0000 0x80000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x00000 0x1000>;
+				arm,msi-base-spi = <72>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m1: v2m@10000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x10000 0x1000>;
+				arm,msi-base-spi = <88>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m2: v2m@20000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x20000 0x1000>;
+				arm,msi-base-spi = <104>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m3: v2m@30000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x30000 0x1000>;
+				arm,msi-base-spi = <120>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m4: v2m@40000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x40000 0x1000>;
+				arm,msi-base-spi = <136>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m5: v2m@50000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x50000 0x1000>;
+				arm,msi-base-spi = <152>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m6: v2m@60000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x60000 0x1000>;
+				arm,msi-base-spi = <168>;
+				arm,msi-num-spis = <16>;
+			};
+
+			v2m7: v2m@70000 {
+				compatible = "arm,gic-v2m-frame";
+				interrupt-parent = <&gic>;
+				msi-controller;
+				reg = <0x70000 0x1000>;
+				arm,msi-base-spi = <184>;
+				arm,msi-num-spis = <16>;
+			};
+		};
+
+		cci@65590000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x65590000 0x1000>;
+			ranges = <0 0x65590000 0x10000>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1",
+					     "arm,cci-400-pmu";
+				reg = <0x9000 0x4000>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		usbdrd_phy: phy@66000960 {
+			#phy-cells = <0>;
+			compatible = "brcm,ns2-drd-phy";
+			reg = <0x66000960 0x24>,
+			      <0x67012800 0x4>,
+			      <0x6501d148 0x4>,
+			      <0x664d0700 0x4>;
+			reg-names = "icfg", "rst-ctrl",
+				    "crmu-ctrl", "usb2-strap";
+			id-gpios = <&gpio_g 30 0>;
+			vbus-gpios = <&gpio_g 31 0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@66010000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x66010000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mdio_mux_iproc: mdio-mux@66020000 {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x66020000 0x250>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy0: pci-phy@0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio@7 {
+				reg = <0x7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pci_phy1: pci-phy@0 {
+					compatible = "brcm,ns2-pcie-phy";
+					reg = <0x0>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio@10 {
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		timer0: timer@66030000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66030000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer1: timer@66040000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66040000 0x1000>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@66050000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66050000 0x1000>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer3: timer@66060000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66060000 0x1000>;
+			interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		i2c0: i2c@66080000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x66080000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@66090000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x66090000 0x1000>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		gpio_g: gpio@660a0000 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x660a0000 0x50>;
+			ngpios = <32>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@660b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x660b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		uart0: serial@66100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66100000 0x100>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@66110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66110000 0x100>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@66120000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66120000 0x100>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@66130000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x66130000 0x100>;
+			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		ssp0: spi@66180000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66180000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: spi@66190000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x66190000 0x1000>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hwrng: hwrng@66220000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x66220000 0x28>;
+		};
+
+		sata_phy: sata_phy@663f0100 {
+			compatible = "brcm,iproc-ns2-sata-phy";
+			reg = <0x663f0100 0x1f00>,
+			      <0x663f004c 0x10>;
+			reg-names = "phy", "phy-ctrl";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: sata@663f2000 {
+			compatible = "brcm,iproc-ahci", "generic-ahci";
+			reg = <0x663f2000 0x1000>;
+			dma-coherent;
+			reg-names = "ahci";
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		sdio0: sdhci@66420000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66420000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci@66430000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66430000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		nand: nand@66460000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x66460000 0x600>,
+			      <0x67015408 0x600>,
+			      <0x66460f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		qspi: spi@66470200 {
+			compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x66470200 0x184>,
+				<0x66470000 0x124>,
+				<0x67017408 0x004>,
+				<0x664703a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				"intr_status_reg";
+			interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_l1_intr";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
new file mode 100644
index 000000000..20c7d0aa6
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
new file mode 100644
index 000000000..8fe7325cf
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -0,0 +1,112 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stingray-board-base.dtsi"
+
+/ {
+	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
+		compatible = "regulator-gpio";
+		regulator-name = "sdio0_vddo_ctrl_reg";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pca9505 18 0>;
+		states = <3300000 0x0
+			  1800000 0x1>;
+	};
+
+	sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
+		compatible = "regulator-gpio";
+		regulator-name = "sdio1_vddo_ctrl_reg";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pca9505 19 0>;
+		states = <3300000 0x0
+			  1800000 0x1>;
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9505: pca9505@20 {
+		compatible = "nxp,pca9505";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8574: pcf8574@27 {
+		compatible = "nxp,pcf8574a";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x27>;
+	};
+};
+
+&enet {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <16>;
+		brcm,nand-oob-sector-size = <16>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&sdio0 {
+	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
+	status = "okay";
+};
+
+&sdio1 {
+	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
new file mode 100644
index 000000000..dfac910a4
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -0,0 +1,86 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958742k", "brcm,stingray";
+	model = "Stingray Combo SVK (BCM958742K)";
+};
+
+&gphy0 {
+	enet-phy-lane-swap;
+};
+
+&sdio0 {
+	mmc-ddr-1_8v;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ssp0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio_hsls 34 0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ssp1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio_hsls 96 0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
new file mode 100644
index 000000000..55ba495ef
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
@@ -0,0 +1,48 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm958742-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958742t", "brcm,stingray";
+	model = "Stingray SST100 (BCM958742T)";
+};
+
+&gphy0 {
+	enet-phy-lane-swap;
+};
+
+&sdio0 {
+	mmc-ddr-1_8v;
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
new file mode 100644
index 000000000..66471a25e
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+/dts-v1/;
+
+#include "stingray-board-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958802a802x", "brcm,stingray";
+	model = "Stingray PS225xx (BCM958802A802x)";
+};
+
+&enet {
+	status = "disabled";
+};
+
+&sdio0 {
+	no-1-8-v;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
new file mode 100644
index 000000000..cdd709491
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *  Copyright(c) 2016-2018 Broadcom
+ */
+
+#include "stingray.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&memory { /* Default DRAM banks */
+	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&enet {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gphy0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdio0 {
+	non-removable;
+	full-pwr-cycle;
+};
+
+&sdio1 {
+	full-pwr-cycle;
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
new file mode 100644
index 000000000..10a106aca
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -0,0 +1,182 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/clock/bcm-sr.h>
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+
+		crmu_ref25m: crmu_ref25m {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&osc>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		genpll0: genpll0@1d104 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll0";
+			reg = <0x0001d104 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
+					     "clk_250", "clk_pcie_axi",
+					     "clk_paxc_axi_x2",
+					     "clk_paxc_axi";
+		};
+
+		genpll2: genpll2@1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
+		genpll3: genpll3@1d1e0 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll3";
+			reg = <0x0001d1e0 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll3", "clk_hsls",
+					     "clk_sdio";
+		};
+
+		genpll4: genpll4@1d214 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll4";
+			reg = <0x0001d214 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll4", "clk_ccn",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
+					     "clk_bridge_fscpu";
+		};
+
+		genpll5: genpll5@1d248 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll5";
+			reg = <0x0001d248 0x32>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
+		};
+
+		lcpll0: lcpll0@1d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll0";
+			reg = <0x0001d0c4 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "clk_sata_refp",
+					     "clk_sata_refn", "clk_sata_350",
+					     "clk_sata_500";
+		};
+
+		lcpll1: lcpll1@1d138 {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-lcpll1";
+			reg = <0x0001d138 0x3c>,
+			      <0x0001c870 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll1", "clk_wan",
+					     "clk_usb_ref",
+					     "clk_crmu_ts";
+		};
+
+		hsls_clk: hsls_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 1>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_div2_clk: hsls_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+
+		};
+
+		hsls_div4_clk: hsls_div4_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_clk: hsls_25m_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&crmu_ref25m>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		hsls_25m_div2_clk: hsls_25m_div2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&hsls_25m_clk>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		sdio0_clk: sdio0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
+
+		sdio1_clk: sdio1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
new file mode 100644
index 000000000..9666969c8
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -0,0 +1,118 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+	fs4: fs4 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x67000000 0x00800000>;
+
+		crypto_mbox: crypto_mbox@0 {
+			compatible = "brcm,iproc-flexrm-mbox";
+			reg = <0x00000000 0x200000>;
+			msi-parent = <&gic_its 0x4100>;
+			#mbox-cells = <3>;
+			dma-coherent;
+		};
+
+		raid_mbox: raid_mbox@400000 {
+			compatible = "brcm,iproc-flexrm-mbox";
+			reg = <0x00400000 0x200000>;
+			dma-coherent;
+			msi-parent = <&gic_its 0x4300>;
+			#mbox-cells = <3>;
+		};
+
+		raid0: raid@0 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 0 0x1 0xff00>,
+				 <&raid_mbox 1 0x1 0xff00>,
+				 <&raid_mbox 2 0x1 0xff00>,
+				 <&raid_mbox 3 0x1 0xff00>;
+		};
+
+		raid1: raid@1 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 4 0x1 0xff00>,
+				 <&raid_mbox 5 0x1 0xff00>,
+				 <&raid_mbox 6 0x1 0xff00>,
+				 <&raid_mbox 7 0x1 0xff00>;
+		};
+
+		raid2: raid@2 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 8 0x1 0xff00>,
+				 <&raid_mbox 9 0x1 0xff00>,
+				 <&raid_mbox 10 0x1 0xff00>,
+				 <&raid_mbox 11 0x1 0xff00>;
+		};
+
+		raid3: raid@3 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 12 0x1 0xff00>,
+				 <&raid_mbox 13 0x1 0xff00>,
+				 <&raid_mbox 14 0x1 0xff00>,
+				 <&raid_mbox 15 0x1 0xff00>;
+		};
+
+		raid4: raid@4 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 16 0x1 0xff00>,
+				 <&raid_mbox 17 0x1 0xff00>,
+				 <&raid_mbox 18 0x1 0xff00>,
+				 <&raid_mbox 19 0x1 0xff00>;
+		};
+
+		raid5: raid@5 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 20 0x1 0xff00>,
+				 <&raid_mbox 21 0x1 0xff00>,
+				 <&raid_mbox 22 0x1 0xff00>,
+				 <&raid_mbox 23 0x1 0xff00>;
+		};
+
+		raid6: raid@6 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 24 0x1 0xff00>,
+				 <&raid_mbox 25 0x1 0xff00>,
+				 <&raid_mbox 26 0x1 0xff00>,
+				 <&raid_mbox 27 0x1 0xff00>;
+		};
+
+		raid7: raid@7 {
+			compatible = "brcm,iproc-sba-v2";
+			mboxes = <&raid_mbox 28 0x1 0xff00>,
+				 <&raid_mbox 29 0x1 0xff00>,
+				 <&raid_mbox 30 0x1 0xff00>,
+				 <&raid_mbox 31 0x1 0xff00>;
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
new file mode 100644
index 000000000..663e51756
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+pcie8: pcie@60400000 {
+	compatible = "brcm,iproc-pcie-paxc-v2";
+	reg = <0 0x60400000 0 0x1000>;
+	linux,pci-domain = <8>;
+
+	bus-range = <0x0 0x1>;
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+	device_type = "pci";
+	ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>;
+
+	dma-coherent;
+
+	msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */
+		  <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */
+		  <0x101 &gic_its 0x2080 0x1>, /* PF1 */
+		  <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */
+		  <0x102 &gic_its 0x2100 0x1>, /* PF2 */
+		  <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */
+		  <0x103 &gic_its 0x2180 0x1>, /* PF3 */
+		  <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */
+		  <0x104 &gic_its 0x2200 0x1>, /* PF4 */
+		  <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */
+		  <0x105 &gic_its 0x2280 0x1>, /* PF5 */
+		  <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */
+		  <0x106 &gic_its 0x2300 0x1>, /* PF6 */
+		  <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */
+		  <0x107 &gic_its 0x2380 0x1>, /* PF7 */
+		  <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */
+
+	phys = <&pcie_phy 8>;
+	phy-names = "pcie-phy";
+};
+
+pcie-ss {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x40000000 0x800>;
+
+	pcie_phy: phy@0 {
+		compatible = "brcm,sr-pcie-phy";
+		reg = <0x0 0x200>;
+		brcm,sr-cdru = <&cdru>;
+		brcm,sr-mhb = <&mhb>;
+		#phy-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
new file mode 100644
index 000000000..46a827521
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -0,0 +1,346 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
+
+		pinconf: pinconf@140000 {
+			compatible = "pinconf-single";
+			reg = <0x00140000 0x250>;
+			pinctrl-single,register-width = <32>;
+
+			/* pinconf functions */
+		};
+
+		pinmux: pinmux@14029c {
+			compatible = "pinctrl-single";
+			reg = <0x0014029c 0x26c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xf>;
+			pinctrl-single,gpio-range = <
+				&range 0  91 MODE_GPIO
+				&range 95 60 MODE_GPIO
+				>;
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+
+			/* pinctrl functions */
+			tsio_pins: gpio-14-pins {
+				pinctrl-single,pins = <
+					0x038 MODE_NITRO /* tsio_0 */
+					0x03c MODE_NITRO /* tsio_1 */
+				>;
+			};
+
+			nor_pins: pnor-adv-n-pins {
+				pinctrl-single,pins = <
+					0x0ac MODE_PNOR /* nand_ce1_n */
+					0x0b0 MODE_PNOR /* nand_ce0_n */
+					0x0b4 MODE_PNOR /* nand_we_n */
+					0x0b8 MODE_PNOR /* nand_wp_n */
+					0x0bc MODE_PNOR /* nand_re_n */
+					0x0c0 MODE_PNOR /* nand_rdy_bsy_n */
+					0x0c4 MODE_PNOR /* nand_io0_0 */
+					0x0c8 MODE_PNOR /* nand_io1_0 */
+					0x0cc MODE_PNOR /* nand_io2_0 */
+					0x0d0 MODE_PNOR /* nand_io3_0 */
+					0x0d4 MODE_PNOR /* nand_io4_0 */
+					0x0d8 MODE_PNOR /* nand_io5_0 */
+					0x0dc MODE_PNOR /* nand_io6_0 */
+					0x0e0 MODE_PNOR /* nand_io7_0 */
+					0x0e4 MODE_PNOR /* nand_io8_0 */
+					0x0e8 MODE_PNOR /* nand_io9_0 */
+					0x0ec MODE_PNOR /* nand_io10_0 */
+					0x0f0 MODE_PNOR /* nand_io11_0 */
+					0x0f4 MODE_PNOR /* nand_io12_0 */
+					0x0f8 MODE_PNOR /* nand_io13_0 */
+					0x0fc MODE_PNOR /* nand_io14_0 */
+					0x100 MODE_PNOR /* nand_io15_0 */
+					0x104 MODE_PNOR /* nand_ale_0 */
+					0x108 MODE_PNOR /* nand_cle_0 */
+					0x040 MODE_PNOR /* pnor_adv_n */
+					0x044 MODE_PNOR /* pnor_baa_n */
+					0x048 MODE_PNOR /* pnor_bls_0_n */
+					0x04c MODE_PNOR /* pnor_bls_1_n */
+					0x050 MODE_PNOR /* pnor_cre */
+					0x054 MODE_PNOR /* pnor_cs_2_n */
+					0x058 MODE_PNOR /* pnor_cs_1_n */
+					0x05c MODE_PNOR /* pnor_cs_0_n */
+					0x060 MODE_PNOR /* pnor_we_n */
+					0x064 MODE_PNOR /* pnor_oe_n */
+					0x068 MODE_PNOR /* pnor_intr */
+					0x06c MODE_PNOR /* pnor_dat_0 */
+					0x070 MODE_PNOR /* pnor_dat_1 */
+					0x074 MODE_PNOR /* pnor_dat_2 */
+					0x078 MODE_PNOR /* pnor_dat_3 */
+					0x07c MODE_PNOR /* pnor_dat_4 */
+					0x080 MODE_PNOR /* pnor_dat_5 */
+					0x084 MODE_PNOR /* pnor_dat_6 */
+					0x088 MODE_PNOR /* pnor_dat_7 */
+					0x08c MODE_PNOR /* pnor_dat_8 */
+					0x090 MODE_PNOR /* pnor_dat_9 */
+					0x094 MODE_PNOR /* pnor_dat_10 */
+					0x098 MODE_PNOR /* pnor_dat_11 */
+					0x09c MODE_PNOR /* pnor_dat_12 */
+					0x0a0 MODE_PNOR /* pnor_dat_13 */
+					0x0a4 MODE_PNOR /* pnor_dat_14 */
+					0x0a8 MODE_PNOR /* pnor_dat_15 */
+				>;
+			};
+
+			nand_pins: nand-ce1-n-pins {
+				pinctrl-single,pins = <
+					0x0ac MODE_NAND /* nand_ce1_n */
+					0x0b0 MODE_NAND /* nand_ce0_n */
+					0x0b4 MODE_NAND /* nand_we_n */
+					0x0b8 MODE_NAND /* nand_wp_n */
+					0x0bc MODE_NAND /* nand_re_n */
+					0x0c0 MODE_NAND /* nand_rdy_bsy_n */
+					0x0c4 MODE_NAND /* nand_io0_0 */
+					0x0c8 MODE_NAND /* nand_io1_0 */
+					0x0cc MODE_NAND /* nand_io2_0 */
+					0x0d0 MODE_NAND /* nand_io3_0 */
+					0x0d4 MODE_NAND /* nand_io4_0 */
+					0x0d8 MODE_NAND /* nand_io5_0 */
+					0x0dc MODE_NAND /* nand_io6_0 */
+					0x0e0 MODE_NAND /* nand_io7_0 */
+					0x0e4 MODE_NAND /* nand_io8_0 */
+					0x0e8 MODE_NAND /* nand_io9_0 */
+					0x0ec MODE_NAND /* nand_io10_0 */
+					0x0f0 MODE_NAND /* nand_io11_0 */
+					0x0f4 MODE_NAND /* nand_io12_0 */
+					0x0f8 MODE_NAND /* nand_io13_0 */
+					0x0fc MODE_NAND /* nand_io14_0 */
+					0x100 MODE_NAND /* nand_io15_0 */
+					0x104 MODE_NAND /* nand_ale_0 */
+					0x108 MODE_NAND /* nand_cle_0 */
+				>;
+			};
+
+			pwm0_pins: pwm-0-pins {
+				pinctrl-single,pins = <
+					0x10c MODE_NITRO
+				>;
+			};
+
+			pwm1_pins: pwm-1-pins {
+				pinctrl-single,pins = <
+					0x110 MODE_NITRO
+				>;
+			};
+
+			pwm2_pins: pwm-2-pins {
+				pinctrl-single,pins = <
+					0x114 MODE_NITRO
+				>;
+			};
+
+			pwm3_pins: pwm-3-pins {
+				pinctrl-single,pins = <
+					0x118 MODE_NITRO
+				>;
+			};
+
+			dbu_rxd_pins: uart1-sin-nitro-pins {
+				pinctrl-single,pins = <
+					0x11c MODE_NITRO /* dbu_rxd */
+					0x120 MODE_NITRO /* dbu_txd */
+				>;
+			};
+
+			uart1_pins: uart1-sin-nand-pins {
+				pinctrl-single,pins = <
+					0x11c MODE_NAND /* uart1_sin */
+					0x120 MODE_NAND /* uart1_out */
+				>;
+			};
+
+			uart2_pins: uart2-sin-pins {
+				pinctrl-single,pins = <
+					0x124 MODE_NITRO /* uart2_sin */
+					0x128 MODE_NITRO /* uart2_out */
+				>;
+			};
+
+			uart3_pins: uart3-sin-pins {
+				pinctrl-single,pins = <
+					0x12c MODE_NITRO /* uart3_sin */
+					0x130 MODE_NITRO /* uart3_out */
+				>;
+			};
+
+			i2s_pins: i2s-bitclk-pins {
+				pinctrl-single,pins = <
+					0x134 MODE_NITRO /* i2s_bitclk */
+					0x138 MODE_NITRO /* i2s_sdout */
+					0x13c MODE_NITRO /* i2s_sdin */
+					0x140 MODE_NITRO /* i2s_ws */
+					0x144 MODE_NITRO /* i2s_mclk */
+					0x148 MODE_NITRO /* i2s_spdif_out */
+				>;
+			};
+
+			qspi_pins: qspi-hold-n-pins {
+				pinctrl-single,pins = <
+					0x14c MODE_NAND /* qspi_hold_n */
+					0x150 MODE_NAND /* qspi_wp_n */
+					0x154 MODE_NAND /* qspi_sck */
+					0x158 MODE_NAND /* qspi_cs_n */
+					0x15c MODE_NAND /* qspi_mosi */
+					0x160 MODE_NAND /* qspi_miso */
+				>;
+			};
+
+			mdio_pins: ext-mdio-pins {
+				pinctrl-single,pins = <
+					0x164 MODE_NITRO /* ext_mdio */
+					0x168 MODE_NITRO /* ext_mdc */
+				>;
+			};
+
+			i2c0_pins: i2c0-sda-pins {
+				pinctrl-single,pins = <
+					0x16c MODE_NITRO /* i2c0_sda */
+					0x170 MODE_NITRO /* i2c0_scl */
+				>;
+			};
+
+			i2c1_pins: i2c1-sda-pins {
+				pinctrl-single,pins = <
+					0x174 MODE_NITRO /* i2c1_sda */
+					0x178 MODE_NITRO /* i2c1_scl */
+				>;
+			};
+
+			sdio0_pins: sdio0-cd-l-pins {
+				pinctrl-single,pins = <
+					0x17c MODE_NITRO /* sdio0_cd_l */
+					0x180 MODE_NITRO /* sdio0_clk_sdcard */
+					0x184 MODE_NITRO /* sdio0_data0 */
+					0x188 MODE_NITRO /* sdio0_data1 */
+					0x18c MODE_NITRO /* sdio0_data2 */
+					0x190 MODE_NITRO /* sdio0_data3 */
+					0x194 MODE_NITRO /* sdio0_data4 */
+					0x198 MODE_NITRO /* sdio0_data5 */
+					0x19c MODE_NITRO /* sdio0_data6 */
+					0x1a0 MODE_NITRO /* sdio0_data7 */
+					0x1a4 MODE_NITRO /* sdio0_cmd */
+					0x1a8 MODE_NITRO /* sdio0_emmc_rst_n */
+					0x1ac MODE_NITRO /* sdio0_led_on */
+					0x1b0 MODE_NITRO /* sdio0_wp */
+				>;
+			};
+
+			sdio1_pins: sdio1-cd-l-pins {
+				pinctrl-single,pins = <
+					0x1b4 MODE_NITRO /* sdio1_cd_l */
+					0x1b8 MODE_NITRO /* sdio1_clk_sdcard */
+					0x1bc MODE_NITRO /* sdio1_data0 */
+					0x1c0 MODE_NITRO /* sdio1_data1 */
+					0x1c4 MODE_NITRO /* sdio1_data2 */
+					0x1c8 MODE_NITRO /* sdio1_data3 */
+					0x1cc MODE_NITRO /* sdio1_data4 */
+					0x1d0 MODE_NITRO /* sdio1_data5 */
+					0x1d4 MODE_NITRO /* sdio1_data6 */
+					0x1d8 MODE_NITRO /* sdio1_data7 */
+					0x1dc MODE_NITRO /* sdio1_cmd */
+					0x1e0 MODE_NITRO /* sdio1_emmc_rst_n */
+					0x1e4 MODE_NITRO /* sdio1_led_on */
+					0x1e8 MODE_NITRO /* sdio1_wp */
+				>;
+			};
+
+			spi0_pins: spi0-sck-nand-pins {
+				pinctrl-single,pins = <
+					0x1ec MODE_NITRO /* spi0_sck */
+					0x1f0 MODE_NITRO /* spi0_rxd */
+					0x1f4 MODE_NITRO /* spi0_fss */
+					0x1f8 MODE_NITRO /* spi0_txd */
+				>;
+			};
+
+			spi1_pins: spi1-sck-nand-pins {
+				pinctrl-single,pins = <
+					0x1fc MODE_NITRO /* spi1_sck */
+					0x200 MODE_NITRO /* spi1_rxd */
+					0x204 MODE_NITRO /* spi1_fss */
+					0x208 MODE_NITRO /* spi1_txd */
+				>;
+			};
+
+			nuart_pins: uart0-sin-nitro-pins {
+				pinctrl-single,pins = <
+					0x20c MODE_NITRO /* nuart_rxd */
+					0x210 MODE_NITRO /* nuart_txd */
+				>;
+			};
+
+			uart0_pins: uart0-sin-nand-pins {
+				pinctrl-single,pins = <
+					0x20c MODE_NAND /* uart0_sin */
+					0x210 MODE_NAND /* uart0_out */
+					0x214 MODE_NAND /* uart0_rts */
+					0x218 MODE_NAND /* uart0_cts */
+					0x21c MODE_NAND /* uart0_dtr */
+					0x220 MODE_NAND /* uart0_dcd */
+					0x224 MODE_NAND /* uart0_dsr */
+					0x228 MODE_NAND /* uart0_ri */
+				>;
+			};
+
+			drdu2_pins: drdu2-overcurrent-pins {
+				pinctrl-single,pins = <
+					0x22c MODE_NITRO /* drdu2_overcurrent */
+					0x230 MODE_NITRO /* drdu2_vbus_ppc */
+					0x234 MODE_NITRO /* drdu2_vbus_present */
+					0x238 MODE_NITRO /* drdu2_id */
+				>;
+			};
+
+			drdu3_pins: drdu3-overcurrent-pins {
+				pinctrl-single,pins = <
+					0x23c MODE_NITRO /* drdu3_overcurrent */
+					0x240 MODE_NITRO /* drdu3_vbus_ppc */
+					0x244 MODE_NITRO /* drdu3_vbus_present */
+					0x248 MODE_NITRO /* drdu3_id */
+				>;
+			};
+
+			usb3h_pins: usb3h-overcurrent-pins {
+				pinctrl-single,pins = <
+					0x24c MODE_NITRO /* usb3h_overcurrent */
+					0x250 MODE_NITRO /* usb3h_vbus_ppc */
+				>;
+			};
+		};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
new file mode 100644
index 000000000..ac4f7b8f9
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+	usb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
+
+		/*
+		 * Internally, USB bus to the interconnect can only address up
+		 * to 40-bit
+		 */
+		dma-ranges = <0 0 0 0 0x100 0x0>;
+
+		usbphy0: usb-phy@0 {
+			compatible = "brcm,sr-usb-combo-phy";
+			reg = <0x0 0x00000000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		xhci0: usb@1000 {
+			compatible = "generic-xhci";
+			reg = <0x0 0x00001000 0x0 0x1000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0 1>, <&usbphy0 0>;
+			phy-names = "phy0", "phy1";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		bdc0: usb@2000 {
+			compatible = "brcm,bdc-v0.16";
+			reg = <0x0 0x00002000 0x0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0 0>, <&usbphy0 1>;
+			phy-names = "phy0", "phy1";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usbphy1: usb-phy@10000 {
+			compatible = "brcm,sr-usb-combo-phy";
+			reg = <0x0 0x00010000 0x0 0x100>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbphy2: usb-phy@20000 {
+			compatible = "brcm,sr-usb-hs-phy";
+			reg = <0x0 0x00020000 0x0 0x100>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		xhci1: usb@11000 {
+			compatible = "generic-xhci";
+			reg = <0x0 0x00011000 0x0 0x1000>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
+			phy-names = "phy0", "phy1", "phy2";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		bdc1: usb@21000 {
+			compatible = "brcm,bdc-v0.16";
+			reg = <0x0 0x00021000 0x0 0x1000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy2>;
+			phy-names = "phy0";
+			dma-coherent;
+			status = "disabled";
+		};
+	};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
new file mode 100644
index 000000000..f049687d6
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -0,0 +1,717 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015-2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "brcm,stingray";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER2_L2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x201>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER2_L2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER3_L2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x301>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER3_L2>;
+		};
+
+		CLUSTER0_L2: l2-cache@0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER1_L2: l2-cache@100 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER2_L2: l2-cache@200 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER3_L2: l2-cache@300 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	memory: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
+
+	scr {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x61000000 0x05000000>;
+
+		ccn: ccn@0 {
+			compatible = "arm,ccn-502";
+			reg = <0x00000000 0x900000>;
+			interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@2c00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			reg = <0x02c00000 0x010000>, /* GICD */
+			      <0x02e00000 0x600000>; /* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			gic_its: msi-controller@63c20000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x02c20000 0x10000>;
+			};
+		};
+
+		smmu: iommu@3000000 {
+			compatible = "arm,mmu-500";
+			reg = <0x03000000 0x80000>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <2>;
+		};
+	};
+
+	crmu: crmu {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x66400000 0x100000>;
+
+		#include "stingray-clock.dtsi"
+
+		otp: otp@1c400 {
+			compatible = "brcm,ocotp-v2";
+			reg = <0x0001c400 0x68>;
+			brcm,ocotp-size = <2048>;
+			status = "okay";
+		};
+
+		cdru: syscon@1d000 {
+			compatible = "brcm,sr-cdru", "syscon";
+			reg = <0x0001d000 0x400>;
+		};
+
+		gpio_crmu: gpio@24800 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x00024800 0x4c>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+	};
+
+	#include "stingray-fs4.dtsi"
+	#include "stingray-pcie.dtsi"
+	#include "stingray-usb.dtsi"
+
+	hsls {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x68900000 0x17700000>;
+
+		#include "stingray-pinctrl.dtsi"
+
+		mdio_mux_iproc: mdio-mux@20000 {
+			compatible = "brcm,mdio-mux-iproc";
+			reg = <0x00020000 0x250>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 { /* PCIe serdes */
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@3 { /* USB */
+				reg = <0x3>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10 { /* RGMII */
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		pwm: pwm@10000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x00010000 0x1000>;
+			clocks = <&crmu_ref25m>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		timer0: timer@30000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00030000 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer1: timer@40000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00040000 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@50000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00050000 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer3: timer@60000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00060000 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer4: timer@70000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00070000 0x1000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer5: timer@80000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00080000 0x1000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer6: timer@90000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x00090000 0x1000>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer7: timer@a0000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x000a0000 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>,
+				 <&hsls_25m_div2_clk>,
+				 <&hsls_div4_clk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x000b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@c0000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x000c0000 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			timeout-sec = <60>;
+		};
+
+		gpio_hsls: gpio@d0000 {
+			compatible = "brcm,iproc-gpio";
+			reg = <0x000d0000 0x864>;
+			ngpios = <151>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinmux 0 0 16>,
+					<&pinmux 16 71 2>,
+					<&pinmux 18 131 8>,
+					<&pinmux 26 83 6>,
+					<&pinmux 32 123 4>,
+					<&pinmux 36 43 24>,
+					<&pinmux 60 89 2>,
+					<&pinmux 62 73 4>,
+					<&pinmux 66 95 28>,
+					<&pinmux 94 127 4>,
+					<&pinmux 98 139 10>,
+					<&pinmux 108 16 27>,
+					<&pinmux 135 77 6>,
+					<&pinmux 141 67 4>,
+					<&pinmux 145 149 6>;
+		};
+
+		i2c1: i2c@e0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x000e0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		uart0: serial@100000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00100000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart1: serial@110000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00110000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart2: serial@120000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00120000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart3: serial@130000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00130000 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <25000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ssp0: spi@180000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x00180000 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssp1: spi@190000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x00190000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hwrng: hwrng@220000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x00220000 0x28>;
+		};
+
+		dma0: dma-controller@310000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x00310000 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&hsls_div2_clk>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu 0x6000 0x0000>;
+		};
+
+		enet: ethernet@340000 {
+			compatible = "brcm,amac";
+			reg = <0x00340000 0x1000>;
+			reg-names = "amac_base";
+			dma-coherent;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand: nand@360000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x00360000 0x600>,
+			      <0x0050a408 0x600>,
+			      <0x00360f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,nand-has-wp;
+			status = "disabled";
+		};
+
+		sdio0: sdhci@3f1000 {
+			compatible = "brcm,sdhci-iproc";
+			reg = <0x003f1000 0x100>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&sdio0_clk>;
+			iommus = <&smmu 0x6002 0x0000>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci@3f2000 {
+			compatible = "brcm,sdhci-iproc";
+			reg = <0x003f2000 0x100>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&sdio1_clk>;
+			iommus = <&smmu 0x6003 0x0000>;
+			status = "disabled";
+		};
+	};
+
+	tmons {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x8f100000 0x100>;
+
+		tmon: tmon@0 {
+			compatible = "brcm,sr-thermal";
+			reg = <0x0 0x40>;
+			brcm,tmon-mask = <0x3f>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		ihost0_thermal: ihost0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 0>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost1_thermal: ihost1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 1>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost2_thermal: ihost2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 2>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		ihost3_thermal: ihost3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 3>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		crmu_thermal: crmu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 4>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+		nitro_thermal: nitro-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tmon 5>;
+			trips {
+				cpu-crit {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	nic-hsls {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0  0x0 0x7fffffff>;
+
+		nic_i2c0: i2c@60826100 {
+			compatible = "brcm,iproc-nic-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60826100 0x100>,
+			      <0x60e00408 0x1000>;
+			brcm,ape-hsls-addr-mask = <0x03400000>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile
new file mode 100644
index 000000000..c178f7e06
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
+dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
new file mode 100644
index 000000000..5ec2bfa5f
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts
@@ -0,0 +1,67 @@
+/*
+ * Cavium Thunder DTS file - Thunder board description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "thunder-88xx.dtsi"
+
+/ {
+	model = "Cavium ThunderX CN88XX board";
+	compatible = "cavium,thunder-88xx";
+
+	aliases {
+		serial0 = &uaa0;
+		serial1 = &uaa1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
new file mode 100644
index 000000000..8ad31dee1
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -0,0 +1,416 @@
+/*
+ * Cavium Thunder DTS file - Thunder SoC description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "cavium,thunder-88xx";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x000>;
+			enable-method = "psci";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x001>;
+			enable-method = "psci";
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x002>;
+			enable-method = "psci";
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x003>;
+			enable-method = "psci";
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x004>;
+			enable-method = "psci";
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x005>;
+			enable-method = "psci";
+		};
+		cpu@6 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x006>;
+			enable-method = "psci";
+		};
+		cpu@7 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x007>;
+			enable-method = "psci";
+		};
+		cpu@8 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x008>;
+			enable-method = "psci";
+		};
+		cpu@9 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x009>;
+			enable-method = "psci";
+		};
+		cpu@a {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00a>;
+			enable-method = "psci";
+		};
+		cpu@b {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00b>;
+			enable-method = "psci";
+		};
+		cpu@c {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00c>;
+			enable-method = "psci";
+		};
+		cpu@d {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00d>;
+			enable-method = "psci";
+		};
+		cpu@e {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00e>;
+			enable-method = "psci";
+		};
+		cpu@f {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x00f>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+		cpu@104 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x104>;
+			enable-method = "psci";
+		};
+		cpu@105 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x105>;
+			enable-method = "psci";
+		};
+		cpu@106 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x106>;
+			enable-method = "psci";
+		};
+		cpu@107 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x107>;
+			enable-method = "psci";
+		};
+		cpu@108 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x108>;
+			enable-method = "psci";
+		};
+		cpu@109 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x109>;
+			enable-method = "psci";
+		};
+		cpu@10a {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10a>;
+			enable-method = "psci";
+		};
+		cpu@10b {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10b>;
+			enable-method = "psci";
+		};
+		cpu@10c {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10c>;
+			enable-method = "psci";
+		};
+		cpu@10d {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10d>;
+			enable-method = "psci";
+		};
+		cpu@10e {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10e>;
+			enable-method = "psci";
+		};
+		cpu@10f {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x10f>;
+			enable-method = "psci";
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x201>;
+			enable-method = "psci";
+		};
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x202>;
+			enable-method = "psci";
+		};
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x203>;
+			enable-method = "psci";
+		};
+		cpu@204 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x204>;
+			enable-method = "psci";
+		};
+		cpu@205 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x205>;
+			enable-method = "psci";
+		};
+		cpu@206 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x206>;
+			enable-method = "psci";
+		};
+		cpu@207 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x207>;
+			enable-method = "psci";
+		};
+		cpu@208 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x208>;
+			enable-method = "psci";
+		};
+		cpu@209 {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x209>;
+			enable-method = "psci";
+		};
+		cpu@20a {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20a>;
+			enable-method = "psci";
+		};
+		cpu@20b {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20b>;
+			enable-method = "psci";
+		};
+		cpu@20c {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20c>;
+			enable-method = "psci";
+		};
+		cpu@20d {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20d>;
+			enable-method = "psci";
+		};
+		cpu@20e {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20e>;
+			enable-method = "psci";
+		};
+		cpu@20f {
+			device_type = "cpu";
+			compatible = "cavium,thunder";
+			reg = <0x0 0x20f>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>,
+		             <1 14 4>,
+		             <1 11 4>,
+		             <1 10 4>;
+	};
+
+	pmu {
+		compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 7 4>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "refclk50mhz";
+		};
+
+		gic0: interrupt-controller@8010,00000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interrupt-controller;
+			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
+			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
+			interrupts = <1 9 0xf04>;
+
+			its: msi-controller@801000020000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x8010 0x20000 0x0 0x200000>;
+			};
+		};
+
+		uaa0: serial@87e0,24000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x24000000 0x0 0x1000>;
+			interrupts = <1 21 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uaa1: serial@87e0,25000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x25000000 0x0 0x1000>;
+			interrupts = <1 22 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
new file mode 100644
index 000000000..d005e1e79
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dts file for Cavium ThunderX2 CN99XX Evaluation Platform
+ *
+ * Copyright (c) 2017 Cavium Inc.
+ * Copyright (c) 2013-2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include "thunder2-99xx.dtsi"
+
+/ {
+	model = "Cavium ThunderX2 CN99XX";
+	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
+		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
new file mode 100644
index 000000000..3419bd252
--- /dev/null
+++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dtsi file for Cavium ThunderX2 CN99XX processor
+ *
+ * Copyright (c) 2017 Cavium Inc.
+ * Copyright (c) 2013-2016 Broadcom
+ * Author: Zi Shen Lim <zlim@broadcom.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Cavium ThunderX2 CN99XX";
+	compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* just 4 cpus now, 128 needed in full config */
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "cavium,thunder2", "brcm,vulcan";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@4000080000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		reg = <0x04 0x00080000 0x0 0x20000>,	/* GICD */
+		      <0x04 0x01000000 0x0 0x1000000>;	/* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gicits: msi-controller@4000100000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x04 0x00100000 0x0 0x20000>;	/* GIC ITS */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
+	};
+
+	clk125mhz: uart_clk125mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk125mhz";
+	};
+
+	pcie@30000000 {
+		compatible = "pci-host-ecam-generic";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* ECAM at 0x3000_0000 - 0x4000_0000 */
+		reg = <0x0 0x30000000  0x0 0x10000000>;
+		reg-names = "PCI ECAM";
+
+		/*
+		 * PCI ranges:
+		 *   IO		no supported
+		 *   MEM        0x4000_0000 - 0x6000_0000
+		 *   MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+		 */
+		ranges =
+		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
+		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		bus-range = <0 0xff>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map =
+		      /* addr  pin  ic   icaddr  icintr */
+			<0 0 0  1  &gic   0 0    GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  2  &gic   0 0    GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  3  &gic   0 0    GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  4  &gic   0 0    GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&gicits>;
+		dma-coherent;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@402020000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x04 0x02020000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk125mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
new file mode 100644
index 000000000..6e4ba6926
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+	exynos5433-tm2.dtb		\
+	exynos5433-tm2e.dtb		\
+	exynos7-espresso.dtb		\
+	exynos7885-jackpotlte.dtb	\
+	exynos850-e850-96.dtb		\
+	exynosautov9-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos-pinctrl.h b/arch/arm64/boot/dts/exynos/exynos-pinctrl.h
new file mode 100644
index 000000000..7dd94a9b3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos-pinctrl.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE		0
+#define EXYNOS_PIN_PULL_DOWN		1
+#define EXYNOS_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0		0
+#define EXYNOS_PIN_PDN_OUT1		1
+#define EXYNOS_PIN_PDN_INPUT		2
+#define EXYNOS_PIN_PDN_PREV		3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800, Exynos7885, Exynos850
+ * (except GPIO_HSI block), ExynosAutov9 (FSI0, PERIC1)
+ */
+#define EXYNOS5420_PIN_DRV_LV1		0
+#define EXYNOS5420_PIN_DRV_LV2		1
+#define EXYNOS5420_PIN_DRV_LV3		2
+#define EXYNOS5420_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos5433 */
+#define EXYNOS5433_PIN_DRV_FAST_SR1	0
+#define EXYNOS5433_PIN_DRV_FAST_SR2	1
+#define EXYNOS5433_PIN_DRV_FAST_SR3	2
+#define EXYNOS5433_PIN_DRV_FAST_SR4	3
+#define EXYNOS5433_PIN_DRV_FAST_SR5	4
+#define EXYNOS5433_PIN_DRV_FAST_SR6	5
+#define EXYNOS5433_PIN_DRV_SLOW_SR1	8
+#define EXYNOS5433_PIN_DRV_SLOW_SR2	9
+#define EXYNOS5433_PIN_DRV_SLOW_SR3	0xa
+#define EXYNOS5433_PIN_DRV_SLOW_SR4	0xb
+#define EXYNOS5433_PIN_DRV_SLOW_SR5	0xc
+#define EXYNOS5433_PIN_DRV_SLOW_SR6	0xf
+
+/* Drive strengths for Exynos7 (except FSYS1) */
+#define EXYNOS7_PIN_DRV_LV1		0
+#define EXYNOS7_PIN_DRV_LV2		2
+#define EXYNOS7_PIN_DRV_LV3		1
+#define EXYNOS7_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos7 FSYS1 block */
+#define EXYNOS7_FSYS1_PIN_DRV_LV1	0
+#define EXYNOS7_FSYS1_PIN_DRV_LV2	4
+#define EXYNOS7_FSYS1_PIN_DRV_LV3	2
+#define EXYNOS7_FSYS1_PIN_DRV_LV4	6
+#define EXYNOS7_FSYS1_PIN_DRV_LV5	1
+#define EXYNOS7_FSYS1_PIN_DRV_LV6	5
+
+/* Drive strengths for Exynos850 GPIO_HSI block */
+#define EXYNOS850_HSI_PIN_DRV_LV1	0	/* 1x   */
+#define EXYNOS850_HSI_PIN_DRV_LV1_5	1	/* 1.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV2	2	/* 2x   */
+#define EXYNOS850_HSI_PIN_DRV_LV2_5	3	/* 2.5x */
+#define EXYNOS850_HSI_PIN_DRV_LV3	4	/* 3x   */
+#define EXYNOS850_HSI_PIN_DRV_LV4	5	/* 4x   */
+
+#define EXYNOS_PIN_FUNC_INPUT		0
+#define EXYNOS_PIN_FUNC_OUTPUT		1
+#define EXYNOS_PIN_FUNC_2		2
+#define EXYNOS_PIN_FUNC_3		3
+#define EXYNOS_PIN_FUNC_4		4
+#define EXYNOS_PIN_FUNC_5		5
+#define EXYNOS_PIN_FUNC_6		6
+#define EXYNOS_PIN_FUNC_EINT		0xf
+#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
new file mode 100644
index 000000000..540b4d6c9
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5433 SoC Memory interface and AMBA bus device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+/ {
+	bus_g2d_400: bus0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_G2D_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_g2d_266: bus1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_G2D_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_266_opp_table>;
+		status = "disabled";
+	};
+
+	bus_gscl: bus2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_GSCL_333>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_gscl_opp_table>;
+		status = "disabled";
+	};
+
+	bus_hevc: bus3 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_HEVC_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_hevc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_jpeg: bus4 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_SCLK_JPEG_MSCL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus5 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_MFC_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mscl: bus6 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_MSCL_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_g2d_400_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc0: bus7 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_hevc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc1: bus8 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_hevc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_noc2: bus9 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_mif CLK_ACLK_BUS2_400>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_noc2_opp_table>;
+		status = "disabled";
+	};
+
+	bus_g2d_400_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <962500>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <937500>;
+		};
+	};
+
+	bus_g2d_266_opp_table: opp-table-3 {
+		compatible = "operating-points-v2";
+
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp-table-4 {
+		compatible = "operating-points-v2";
+
+		opp-333000000 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp-222000000 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp-166500000 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+	};
+
+	bus_hevc_opp_table: opp-table-5 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+
+	bus_noc2_opp_table: opp-table-6 {
+		compatible = "operating-points-v2";
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
new file mode 100644
index 000000000..681553577
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -0,0 +1,799 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+#define PIN(_pin, _func, _pull, _drv)					\
+	pin- ## _pin {							\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>;	\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>;		\
+	}
+
+#define PIN_IN(_pin, _pull, _drv)					\
+	PIN(_pin, INPUT, _pull, _drv)
+
+#define PIN_OT(_pin, _pull, _drv)					\
+	PIN(_pin, OUTPUT, _pull, _drv)
+
+#define PIN_F2(_pin, _pull, _drv)					\
+	PIN(_pin, 2, _pull, _drv)
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpz0: gpz0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+				"gpz0-4", "gpz0-5", "gpz0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pcm0_bus: pcm0-bus-pins {
+		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	uart_aud_bus: uart-aud-bus-pins {
+		samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_cpif {
+	gpv6: gpv6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_ese {
+	gpj2: gpj2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_finger {
+	gpd5: gpd5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_fsys {
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_qrdy: sd0-qrdy-pins {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd1_bus8: sd1-bus-width8-pins {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	pcie_bus: pcie-bus-pins {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	sd2_clk_output: sd2-clk-output-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+
+	sd2_cmd_output: sd2-cmd-output-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
+	};
+};
+
+&pinctrl_imem {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_peric {
+	gpv7: gpv7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
+				"gpd4-3", "gpd4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpd4-3", "gpd4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_spi_pin0: fimc-is-spi-pin0-pins {
+		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_spi_pin1: fimc-is-spi-pin1-pins {
+		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpd1-5", "gpd1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus-pins {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus-pins {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_uart: fimc-is-uart-pins {
+		samsung,pins = "gpc1-1", "gpc0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch0_i2c: fimc-is-ch0-i2c-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch0_mclk: fimc-is-ch0-mclk-pins {
+		samsung,pins = "gpd7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch1_i2c: fimc-is-ch1-i2c-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch1_mclk: fimc-is-ch1-mclk-pins {
+		samsung,pins = "gpd7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch2_i2c: fimc-is-ch2-i2c-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+
+	fimc_is_ch2_mclk: fimc-is-ch2-mclk-pins {
+		samsung,pins = "gpd7-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
new file mode 100644
index 000000000..d163891cd
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -0,0 +1,1379 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Common device tree source file for Samsung's TM2 and TM2E boards
+ * which are based on Samsung Exynos5433 SoC.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+
+/ {
+	aliases {
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		mmc0 = &mshc_0;
+		mmc2 = &mshc_2;
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_cpif;
+		pinctrl3 = &pinctrl_ese;
+		pinctrl4 = &pinctrl_finger;
+		pinctrl5 = &pinctrl_fsys;
+		pinctrl6 = &pinctrl_imem;
+		pinctrl7 = &pinctrl_nfc;
+		pinctrl8 = &pinctrl_peric;
+		pinctrl9 = &pinctrl_touch;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		spi3 = &spi_3;
+		spi4 = &spi_4;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x0 0x20000000 0x0 0xc0000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+		};
+
+		volume-up-key {
+			gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume-up key";
+			debounce-interval = <10>;
+		};
+
+		volume-down-key {
+			gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume-down key";
+			debounce-interval = <10>;
+		};
+
+		homepage-key {
+			gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "homepage key";
+			debounce-interval = <10>;
+		};
+	};
+
+	i2c_max98504: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max98504: amplifier@31 {
+			compatible = "maxim,max98504";
+			reg = <0x31>;
+
+			DIOVDD-supply = <&ldo3_reg>;
+			DVDD-supply = <&ldo3_reg>;
+			PVDD-supply = <&vph_pwr_regulator>;
+		};
+	};
+
+	vph_pwr_regulator: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "VPH_PWR";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+	};
+
+	irda_regulator: regulator-irda {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
+		regulator-name = "irda_regulator";
+	};
+
+	sound {
+		compatible = "samsung,tm2-audio";
+		audio-codec = <&wm5110>, <&hdmi>;
+		i2s-controller = <&i2s0 0>, <&i2s1 0>;
+		audio-amplifier = <&max98504>;
+		mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+		model = "wm5110";
+		samsung,audio-routing =
+			/* Headphone */
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			/* Speaker */
+			"SPK", "SPKOUT",
+			"SPKOUT", "HPOUT2L",
+			"SPKOUT", "HPOUT2R",
+
+			/* Receiver */
+			"RCV", "HPOUT3L",
+			"RCV", "HPOUT3R";
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+
+	thermistor-ap {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor-charger {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 2>;
+	};
+};
+
+&bus_g2d_400 {
+	devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
+	vdd-supply = <&buck4_reg>;
+	exynos,saturation-ratio = <10>;
+	status = "okay";
+};
+
+&bus_g2d_266 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_gscl {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_hevc {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_mscl {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc0 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc1 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&bus_noc2 {
+	devfreq = <&bus_g2d_400>;
+	status = "okay";
+};
+
+&cmu_aud {
+	assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
+		<&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
+		<&cmu_top CLK_MOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_MOUT_SCLK_AUDIO0>,
+		<&cmu_top CLK_MOUT_SCLK_AUDIO1>,
+		<&cmu_top CLK_MOUT_SCLK_SPDIF>,
+
+		<&cmu_aud CLK_DIV_AUD_CA5>,
+		<&cmu_aud CLK_DIV_ACLK_AUD>,
+		<&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
+		<&cmu_aud CLK_DIV_SCLK_AUD_UART>,
+		<&cmu_top CLK_DIV_SCLK_AUDIO0>,
+		<&cmu_top CLK_DIV_SCLK_AUDIO1>,
+		<&cmu_top CLK_DIV_SCLK_PCM1>,
+		<&cmu_top CLK_DIV_SCLK_I2S1>;
+
+	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
+		<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_aud CLK_MOUT_AUD_PLL_USER>,
+		<&cmu_top CLK_FOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
+		<&cmu_top CLK_SCLK_AUDIO0>;
+
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+		<196608001>, <65536001>, <32768001>, <49152001>,
+		<2048001>, <24576001>, <196608001>,
+		<24576001>, <98304001>, <2048001>, <49152001>;
+};
+
+&cmu_fsys {
+	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
+		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
+		<&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
+		<&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
+		<&cmu_top CLK_DIV_SCLK_USBDRD30>,
+		<&cmu_top CLK_DIV_SCLK_USBHOST30>;
+	assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_MOUT_BUS_PLL_USER>,
+		<&cmu_top CLK_SCLK_USBDRD30_FSYS>,
+		<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
+		<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
+			       <66700000>, <66700000>;
+};
+
+&cmu_gscl {
+	assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
+			  <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
+				 <&cmu_top CLK_ACLK_GSCL_333>;
+};
+
+&cmu_mfc {
+	assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
+};
+
+&cmu_mif {
+	assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
+	assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
+	assigned-clock-rates = <0>, <333000000>;
+};
+
+&cmu_mscl {
+	assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+			  <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
+			  <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
+	assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
+				 <&cmu_top CLK_SCLK_JPEG_MSCL>,
+				 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
+				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+};
+
+&cmu_top {
+	assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
+	assigned-clock-rates = <196608001>;
+};
+
+&cpu0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+	status = "okay";
+};
+
+&decon_tv {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			tv_to_hdmi: endpoint {
+				remote-endpoint = <&hdmi_to_tv>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo7_reg>;
+	samsung,burst-clock-frequency = <512000000>;
+	samsung,esc-clock-frequency = <16000000>;
+	samsung,pll-clock-frequency = <24000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&te_irq>;
+};
+
+&gpu {
+	mali-supply = <&buck6_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			hdmi_to_tv: endpoint {
+				remote-endpoint = <&tv_to_hdmi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			hdmi_to_mhl: endpoint {
+				remote-endpoint = <&mhl_to_hdmi>;
+			};
+		};
+	};
+};
+
+&hsi2c_0 {
+	status = "okay";
+	clock-frequency = <2500000>;
+
+	pmic@66 {
+		compatible = "samsung,s2mps13-pmic";
+		interrupt-parent = <&gpa0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x66>;
+		samsung,s2mps11-wrstbi-ground;
+		wakeup-source;
+
+		s2mps13_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_0.9V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_MMC2_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD1_E_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD10_DPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MIPI2L_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD18_MIPI2L_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD18_LLI_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD33_USB30_3.0V_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_INT_M_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_KFC_M_1.1V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_G3D_M_0.95V_AP";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDDQ_EFUSE";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_TFLASH_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "V_CODEC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDDA_1.8V_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_IO_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "CAM_SEN_CORE_1.05V_AP";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VT_CAM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "CAM_AF_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VCC_3.0V_LCD_AP";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VCC_1.8V_LCD_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VT_CAM_2.8V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "TSP_AVDD_3.3V_AP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo31_reg: LDO31 {
+				/*
+				 * LDO31 differs from target to target,
+				 * its definition is in the .dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VTOUCH_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VTOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VCC_1.8V_MHL_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2100000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "OIS_VM_2.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo36_reg: LDO36 {
+				regulator-name = "VSIL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo37_reg: LDO37 {
+				regulator-name = "VF_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo38_reg: LDO38 {
+				/*
+				 * LDO38 differs from target to target,
+				 * its definition is in the .dts
+				 */
+			};
+
+			ldo39_reg: LDO39 {
+				regulator-name = "V_HRM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo40_reg: LDO40 {
+				regulator-name = "V_HRM_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_EGL_1.0V_AP";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_KFC_1.0V_AP";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_INT_0.95V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_G3D_0.9V_AP";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_MEM1_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VDD_LLDO_1.35V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_MLDO_2.0V_AP";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_mem2";
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	s3fwrn5: nfc@27 {
+		compatible = "samsung,s3fwrn5-i2c";
+		reg = <0x27>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		en-gpios = <&gpf1 4 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+
+	stmfts: touchscreen@49 {
+		compatible = "st,stmfts";
+		reg = <0x49>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	bridge@39 {
+		reg = <0x39>;
+		compatible = "sil,sii8620";
+		cvcc10-supply = <&ldo36_reg>;
+		iovcc18-supply = <&ldo34_reg>;
+		interrupt-parent = <&gpf0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "xtal";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mhl_to_hdmi: endpoint {
+					remote-endpoint = <&hdmi_to_mhl>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				mhl_to_musb_con: endpoint {
+					remote-endpoint = <&musb_con_to_mhl>;
+				};
+			};
+		};
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "maxim,max77843";
+		interrupt-parent = <&gpa1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x66>;
+
+		muic: extcon {
+			compatible = "maxim,max77843-muic";
+
+			musb_con: connector {
+				compatible = "samsung,usb-connector-11pin",
+					     "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						/*
+						 * TODO: The DTS this is based on does not have
+						 * port@0 which is a required property. The ports
+						 * look incomplete and need fixing.
+						 * Add a disabled port just to satisfy dtschema.
+						 */
+						reg = <0>;
+						status = "disabled";
+					};
+
+					port@3 {
+						reg = <3>;
+						musb_con_to_mhl: endpoint {
+							remote-endpoint = <&mhl_to_musb_con>;
+						};
+					};
+				};
+			};
+
+			ports {
+				port {
+					muic_to_usb: endpoint {
+						remote-endpoint = <&usb_to_muic>;
+					};
+				};
+			};
+		};
+
+		regulators {
+			compatible = "maxim,max77843-regulator";
+			safeout1_reg: SAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			safeout2_reg: SAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <4950000>;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <100000>;
+				regulator-max-microamp = <3150000>;
+			};
+		};
+
+		haptic: motor-driver {
+			compatible = "maxim,max77843-haptic";
+			haptic-supply = <&ldo38_reg>;
+			pwms = <&pwm 0 33670 0>;
+		};
+	};
+};
+
+&hsi2c_11 {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
+	status = "okay";
+};
+
+&mshc_0 {
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 3>;
+	samsung,read-strobe-delay = <90>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+			&sd0_bus8 &sd0_rdqs>;
+	bus-width = <8>;
+	assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+	assigned-clock-rates = <800000000>;
+};
+
+&mshc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	disable-wp;
+	cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	fifo-depth = <0x80>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+};
+
+&pcie {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+	vdd10-supply = <&ldo6_reg>;
+	vdd18-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
+			  <&cmu_top CLK_MOUT_SCLK_PCIE_100>;
+	assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+				 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
+	assigned-clock-rates = <0>, <100000000>;
+	interrupt-map-mask = <0 0 0 0>;
+	interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&ppmu_d0_general {
+	status = "okay";
+	events {
+		ppmu_event0_d0_general: ppmu-event0-d0-general {
+			event-name = "ppmu-event0-d0-general";
+		};
+	};
+};
+
+&ppmu_d1_general {
+	status = "okay";
+	events {
+		ppmu_event0_d1_general: ppmu-event0-d1-general {
+		       event-name = "ppmu-event0-d1-general";
+	       };
+	};
+};
+
+&pinctrl_alive {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_alive>;
+
+	initial_alive: initial-state {
+		PIN_IN(gpa0-0, DOWN, FAST_SR1);
+		PIN_IN(gpa0-1, NONE, FAST_SR1);
+		PIN_IN(gpa0-2, DOWN, FAST_SR1);
+		PIN_IN(gpa0-3, NONE, FAST_SR1);
+		PIN_IN(gpa0-4, NONE, FAST_SR1);
+		PIN_IN(gpa0-5, DOWN, FAST_SR1);
+		PIN_IN(gpa0-6, NONE, FAST_SR1);
+		PIN_IN(gpa0-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa1-0, UP, FAST_SR1);
+		PIN_IN(gpa1-1, UP, FAST_SR1);
+		PIN_IN(gpa1-2, NONE, FAST_SR1);
+		PIN_IN(gpa1-3, DOWN, FAST_SR1);
+		PIN_IN(gpa1-4, DOWN, FAST_SR1);
+		PIN_IN(gpa1-5, NONE, FAST_SR1);
+		PIN_IN(gpa1-6, NONE, FAST_SR1);
+		PIN_IN(gpa1-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa2-0, NONE, FAST_SR1);
+		PIN_IN(gpa2-1, NONE, FAST_SR1);
+		PIN_IN(gpa2-2, NONE, FAST_SR1);
+		PIN_IN(gpa2-3, DOWN, FAST_SR1);
+		PIN_IN(gpa2-4, NONE, FAST_SR1);
+		PIN_IN(gpa2-5, DOWN, FAST_SR1);
+		PIN_IN(gpa2-6, DOWN, FAST_SR1);
+		PIN_IN(gpa2-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa3-0, DOWN, FAST_SR1);
+		PIN_IN(gpa3-1, DOWN, FAST_SR1);
+		PIN_IN(gpa3-2, NONE, FAST_SR1);
+		PIN_IN(gpa3-3, DOWN, FAST_SR1);
+		PIN_IN(gpa3-4, NONE, FAST_SR1);
+		PIN_IN(gpa3-5, DOWN, FAST_SR1);
+		PIN_IN(gpa3-6, DOWN, FAST_SR1);
+		PIN_IN(gpa3-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf1-0, NONE, FAST_SR1);
+		PIN_IN(gpf1-1, NONE, FAST_SR1);
+		PIN_IN(gpf1-2, DOWN, FAST_SR1);
+		PIN_IN(gpf1-4, UP, FAST_SR1);
+		PIN_OT(gpf1-5, NONE, FAST_SR1);
+		PIN_IN(gpf1-6, DOWN, FAST_SR1);
+		PIN_IN(gpf1-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf2-0, DOWN, FAST_SR1);
+		PIN_IN(gpf2-1, DOWN, FAST_SR1);
+		PIN_IN(gpf2-2, DOWN, FAST_SR1);
+		PIN_IN(gpf2-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpf3-0, DOWN, FAST_SR1);
+		PIN_IN(gpf3-1, DOWN, FAST_SR1);
+		PIN_IN(gpf3-2, NONE, FAST_SR1);
+		PIN_IN(gpf3-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpf4-0, DOWN, FAST_SR1);
+		PIN_IN(gpf4-1, DOWN, FAST_SR1);
+		PIN_IN(gpf4-2, DOWN, FAST_SR1);
+		PIN_IN(gpf4-3, DOWN, FAST_SR1);
+		PIN_IN(gpf4-4, DOWN, FAST_SR1);
+		PIN_IN(gpf4-5, DOWN, FAST_SR1);
+		PIN_IN(gpf4-6, DOWN, FAST_SR1);
+		PIN_IN(gpf4-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf5-0, DOWN, FAST_SR1);
+		PIN_IN(gpf5-1, DOWN, FAST_SR1);
+		PIN_IN(gpf5-2, DOWN, FAST_SR1);
+		PIN_IN(gpf5-3, DOWN, FAST_SR1);
+		PIN_OT(gpf5-4, NONE, FAST_SR1);
+		PIN_IN(gpf5-5, DOWN, FAST_SR1);
+		PIN_IN(gpf5-6, DOWN, FAST_SR1);
+		PIN_IN(gpf5-7, DOWN, FAST_SR1);
+	};
+
+	te_irq: te-irq-pins {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <0xf>;
+	};
+};
+
+&pinctrl_cpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_cpif>;
+
+	initial_cpif: initial-state {
+		PIN_IN(gpv6-0, DOWN, FAST_SR1);
+		PIN_IN(gpv6-1, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_ese {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_ese>;
+
+	pcie_wlanen: pcie-wlanen-pins {
+		samsung,pins = "gpj2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
+	};
+
+	initial_ese: initial-state {
+		PIN_IN(gpj2-1, DOWN, FAST_SR1);
+		PIN_IN(gpj2-2, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_fsys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_fsys>;
+
+	initial_fsys: initial-state {
+		PIN_IN(gpr3-0, NONE, FAST_SR1);
+		PIN_IN(gpr3-1, DOWN, FAST_SR1);
+		PIN_IN(gpr3-2, DOWN, FAST_SR1);
+		PIN_IN(gpr3-3, DOWN, FAST_SR1);
+		PIN_IN(gpr3-7, NONE, FAST_SR1);
+	};
+};
+
+&pinctrl_imem {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_imem>;
+
+	initial_imem: initial-state {
+		PIN_IN(gpf0-0, UP, FAST_SR1);
+		PIN_IN(gpf0-1, UP, FAST_SR1);
+		PIN_IN(gpf0-2, DOWN, FAST_SR1);
+		PIN_IN(gpf0-3, UP, FAST_SR1);
+		PIN_IN(gpf0-4, DOWN, FAST_SR1);
+		PIN_IN(gpf0-5, NONE, FAST_SR1);
+		PIN_IN(gpf0-6, DOWN, FAST_SR1);
+		PIN_IN(gpf0-7, UP, FAST_SR1);
+	};
+};
+
+&pinctrl_nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_nfc>;
+
+	initial_nfc: initial-state {
+		PIN_IN(gpj0-2, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_peric {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_peric>;
+
+	initial_peric: initial-state {
+		PIN_IN(gpv7-0, DOWN, FAST_SR1);
+		PIN_IN(gpv7-1, DOWN, FAST_SR1);
+		PIN_IN(gpv7-2, NONE, FAST_SR1);
+		PIN_IN(gpv7-3, DOWN, FAST_SR1);
+		PIN_IN(gpv7-4, DOWN, FAST_SR1);
+		PIN_IN(gpv7-5, DOWN, FAST_SR1);
+
+		PIN_IN(gpb0-4, DOWN, FAST_SR1);
+
+		PIN_IN(gpc0-2, DOWN, FAST_SR1);
+		PIN_IN(gpc0-5, DOWN, FAST_SR1);
+		PIN_IN(gpc0-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpc1-1, DOWN, FAST_SR1);
+
+		PIN_IN(gpc3-4, NONE, FAST_SR1);
+		PIN_IN(gpc3-5, NONE, FAST_SR1);
+		PIN_IN(gpc3-6, NONE, FAST_SR1);
+		PIN_IN(gpc3-7, NONE, FAST_SR1);
+
+		PIN_OT(gpg0-0, NONE, FAST_SR1);
+		PIN_F2(gpg0-1, DOWN, FAST_SR1);
+
+		PIN_IN(gpd2-5, DOWN, FAST_SR1);
+
+		PIN_IN(gpd4-0, NONE, FAST_SR1);
+		PIN_IN(gpd4-1, DOWN, FAST_SR1);
+		PIN_IN(gpd4-2, DOWN, FAST_SR1);
+		PIN_IN(gpd4-3, DOWN, FAST_SR1);
+		PIN_IN(gpd4-4, DOWN, FAST_SR1);
+
+		PIN_IN(gpd6-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpd8-1, UP, FAST_SR1);
+
+		PIN_IN(gpg1-0, DOWN, FAST_SR1);
+		PIN_IN(gpg1-1, DOWN, FAST_SR1);
+		PIN_IN(gpg1-2, DOWN, FAST_SR1);
+		PIN_IN(gpg1-3, DOWN, FAST_SR1);
+		PIN_IN(gpg1-4, DOWN, FAST_SR1);
+
+		PIN_IN(gpg2-0, DOWN, FAST_SR1);
+		PIN_IN(gpg2-1, DOWN, FAST_SR1);
+
+		PIN_IN(gpg3-0, DOWN, FAST_SR1);
+		PIN_IN(gpg3-1, DOWN, FAST_SR1);
+		PIN_IN(gpg3-5, DOWN, FAST_SR1);
+	};
+};
+
+&pinctrl_touch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&initial_touch>;
+
+	initial_touch: initial-state {
+		PIN_IN(gpj1-2, DOWN, FAST_SR1);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mic {
+	status = "okay";
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&xxti>;
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "extclk";
+	};
+};
+
+&spi_1 {
+	cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	wm5110: audio-codec@0 {
+		compatible = "wlf,wm5110";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpa0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		clocks = <&pmu_system_controller 0>,
+			<&s2mps13_osc S2MPS11_CLK_BT>;
+		clock-names = "mclk1", "mclk2";
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		wlf,micd-detect-debounce = <300>;
+		wlf,micd-bias-start-time = <0x1>;
+		wlf,micd-rate = <0x7>;
+		wlf,micd-dbtime = <0x2>;
+		wlf,micd-force-micbias;
+		wlf,micd-configs = <0x0 1 0>;
+		wlf,hpdet-channel = <1>;
+		wlf,gpsw = <0x1>;
+		wlf,inmode = <2 0 2 0>;
+
+		wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+		wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+		/* core supplies */
+		AVDD-supply = <&ldo18_reg>;
+		DBVDD1-supply = <&ldo18_reg>;
+		CPVDD-supply = <&ldo18_reg>;
+		DBVDD2-supply = <&ldo18_reg>;
+		DBVDD3-supply = <&ldo18_reg>;
+		SPKVDDL-supply = <&vph_pwr_regulator>;
+		SPKVDDR-supply = <&vph_pwr_regulator>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&spi_3 {
+	status = "okay";
+	no-cs-readback;
+
+	irled@0 {
+		compatible = "ir-spi-led";
+		reg = <0x0>;
+		spi-max-frequency = <5000000>;
+		power-supply = <&irda_regulator>;
+		duty-cycle = /bits/ 8 <60>;
+		led-active-low;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
+&timer {
+	clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_apollo {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&tmu_g3d {
+	vtmu-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&usbdrd30 {
+	vdd33-supply = <&ldo10_reg>;
+	vdd10-supply = <&ldo6_reg>;
+	status = "okay";
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+	vbus-supply = <&safeout1_reg>;
+	status = "okay";
+
+	port {
+		usb_to_muic: endpoint {
+			remote-endpoint = <&muic_to_usb>;
+		};
+	};
+};
+
+&xxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
new file mode 100644
index 000000000..aca01709f
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+	model = "Samsung TM2 board";
+	compatible = "samsung,tm2", "samsung,exynos5433";
+	chassis-type = "handset";
+};
+
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSD_USER>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+				 <&cmu_mif CLK_SCLK_DSD_DISP>;
+	assigned-clock-rates = <250000000>, <400000000>;
+};
+
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+
+	touchkey@20 {
+		compatible = "cypress,tm2-touchkey";
+		reg = <0x20>;
+		interrupt-parent = <&gpa3>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&ldo32_reg>;
+		vdd-supply = <&ldo33_reg>;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.85V_AP";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <1850000>;
+};
+
+&ldo38_reg {
+	regulator-name = "VCC_3.0V_MOTOR_AP";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&stmfts {
+	touchscreen-size-x = <1439>;
+	touchscreen-size-y = <2559>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
new file mode 100644
index 000000000..22d26460f
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5433 TM2E board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
+ * Samsung Exynos5433 SoC.
+ */
+
+#include "exynos5433-tm2-common.dtsi"
+
+/ {
+	model = "Samsung TM2E board";
+	compatible = "samsung,tm2e", "samsung,exynos5433";
+	chassis-type = "handset";
+};
+
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+	assigned-clock-rates = <278000000>, <400000000>;
+};
+
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3hf2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "TSP_VDD_1.8V_AP";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo38_reg {
+	regulator-name = "VCC_3.3V_MOTOR_AP";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&stmfts {
+	touchscreen-size-x = <1599>;
+	touchscreen-size-y = <2559>;
+	touch-key-connected;
+	ledvdd-supply = <&ldo33_reg>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 000000000..81b72393d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	atlas0_thermal: atlas0-thermal {
+		thermal-sensors = <&tmu_atlas0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas0_alert_0: atlas0-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_1: atlas0-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_2: atlas0-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_3: atlas0-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_4: atlas0-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_5: atlas0-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_6: atlas0-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1800MHz  */
+				trip = <&atlas0_alert_0>;
+				cooling-device = <&cpu4 1 2>, <&cpu5 1 2>,
+						 <&cpu6 1 2>, <&cpu7 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1700MHz  */
+				trip = <&atlas0_alert_1>;
+				cooling-device = <&cpu4 2 3>, <&cpu5 2 3>,
+						 <&cpu6 2 3>, <&cpu7 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1600MHz  */
+				trip = <&atlas0_alert_2>;
+				cooling-device = <&cpu4 3 4>, <&cpu5 3 4>,
+						 <&cpu6 3 4>, <&cpu7 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 1500MHz  */
+				trip = <&atlas0_alert_3>;
+				cooling-device = <&cpu4 4 5>, <&cpu5 4 5>,
+						 <&cpu6 4 5>, <&cpu7 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 1400MHz  */
+				trip = <&atlas0_alert_4>;
+				cooling-device = <&cpu4 5 7>, <&cpu5 5 7>,
+						 <&cpu6 5 7>, <&cpu7 5 7>;
+			};
+			map5 {
+				/* Set maximum frequencyas 1200MHz  */
+				trip = <&atlas0_alert_5>;
+				cooling-device = <&cpu4 7 9>, <&cpu5 7 9>,
+						 <&cpu6 7 9>, <&cpu7 7 9>;
+			};
+			map6 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&atlas0_alert_6>;
+				cooling-device = <&cpu4 9 14>, <&cpu5 9 14>,
+						 <&cpu6 9 14>, <&cpu7 9 14>;
+			};
+		};
+	};
+
+	atlas1_thermal: atlas1-thermal {
+		thermal-sensors = <&tmu_atlas1>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas1_alert_0: atlas1-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_1: atlas1-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_2: atlas1-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_3: atlas1-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_4: atlas1-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_5: atlas1-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_6: atlas1-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	g3d_thermal: g3d-thermal {
+		thermal-sensors = <&tmu_g3d>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			g3d_alert_0: g3d-alert-0 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_1: g3d-alert-1 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_2: g3d-alert-2 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_3: g3d-alert-3 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_4: g3d-alert-4 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_5: g3d-alert-5 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_6: g3d-alert-6 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	apollo_thermal: apollo-thermal {
+		thermal-sensors = <&tmu_apollo>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			apollo_alert_0: apollo-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_1: apollo-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_2: apollo-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_3: apollo-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_4: apollo-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_5: apollo-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_6: apollo-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1200MHz  */
+				trip = <&apollo_alert_2>;
+				cooling-device = <&cpu0 1 2>, <&cpu1 1 2>,
+						 <&cpu2 1 2>, <&cpu3 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1100MHz  */
+				trip = <&apollo_alert_3>;
+				cooling-device = <&cpu0 2 3>, <&cpu1 2 3>,
+						 <&cpu2 2 3>, <&cpu3 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&apollo_alert_4>;
+				cooling-device = <&cpu0 3 4>, <&cpu1 3 4>,
+						 <&cpu2 3 4>, <&cpu3 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 900MHz  */
+				trip = <&apollo_alert_5>;
+				cooling-device = <&cpu0 4 5>, <&cpu1 4 5>,
+						 <&cpu2 4 5>, <&cpu3 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 800MHz  */
+				trip = <&apollo_alert_6>;
+				cooling-device = <&cpu0 5 9>, <&cpu1 5 9>,
+						 <&cpu2 5 9>, <&cpu3 5 9>;
+			};
+		};
+	};
+
+	isp_thermal: isp-thermal {
+		thermal-sensors = <&tmu_isp>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			isp_alert_0: isp-alert-0 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_1: isp-alert-1 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_2: isp-alert-2 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_3: isp-alert-3 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_4: isp-alert-4 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_5: isp-alert-5 {
+				temperature = <105000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_6: isp-alert-6 {
+				temperature = <110000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
new file mode 100644
index 000000000..91ae0462a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -0,0 +1,1980 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5433 SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos5433 SoC device nodes are listed in this file.
+ * Exynos5433 based board files can include this file and provide
+ * values for board specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos5433 SoC. As device tree coverage for Exynos5433 increases,
+ * additional nodes can be added to this file.
+ */
+
+#include <dt-bindings/clock/exynos5433.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos5433";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	interrupt-parent = <&gic>;
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	arm-a57-pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	xxti: clock {
+		/* XXTI */
+		compatible = "fixed-clock";
+		clock-output-names = "oscclk";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+			clocks = <&cmu_apollo CLK_SCLK_APOLLO>;
+			clock-names = "apolloclk";
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+			operating-points-v2 = <&cluster_a53_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x0>;
+			clocks = <&cmu_atlas CLK_SCLK_ATLAS>;
+			clock-names = "atlasclk";
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x1>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x2>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			enable-method = "psci";
+			reg = <0x3>;
+			operating-points-v2 = <&cluster_a57_opp_table>;
+			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cluster_a57_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		cluster_a53_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
+		};
+	};
+
+	cluster_a53_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1112500>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster_a57_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <912500>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <912500>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <937500>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1087500>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1137500>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1212500>;
+		};
+		opp-1900000000 {
+			opp-hz = /bits/ 64 <1900000000>;
+			opp-microvolt = <1262500>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		cmu_top: clock-controller@10030000 {
+			compatible = "samsung,exynos5433-cmu-top";
+			reg = <0x10030000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll",
+				"sclk_mfc_pll",
+				"sclk_bus_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>,
+				<&cmu_mif CLK_SCLK_MFC_PLL>,
+				<&cmu_mif CLK_SCLK_BUS_PLL>;
+		};
+
+		cmu_cpif: clock-controller@10fc0000 {
+			compatible = "samsung,exynos5433-cmu-cpif";
+			reg = <0x10fc0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk";
+			clocks = <&xxti>;
+		};
+
+		cmu_mif: clock-controller@105b0000 {
+			compatible = "samsung,exynos5433-cmu-mif";
+			reg = <0x105b0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_mphy_pll";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_MPHY_PLL>;
+		};
+
+		cmu_peric: clock-controller@14c80000 {
+			compatible = "samsung,exynos5433-cmu-peric";
+			reg = <0x14c80000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos5433-cmu-peris";
+			reg = <0x10040000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_fsys: clock-controller@156e0000 {
+			compatible = "samsung,exynos5433-cmu-fsys";
+			reg = <0x156e0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_ufs_mphy",
+				"aclk_fsys_200",
+				"sclk_pcie_100_fsys",
+				"sclk_ufsunipro_fsys",
+				"sclk_mmc2_fsys",
+				"sclk_mmc1_fsys",
+				"sclk_mmc0_fsys",
+				"sclk_usbhost30_fsys",
+				"sclk_usbdrd30_fsys";
+			clocks = <&xxti>,
+				<&cmu_cpif CLK_SCLK_UFS_MPHY>,
+				<&cmu_top CLK_ACLK_FSYS_200>,
+				<&cmu_top CLK_SCLK_PCIE_100_FSYS>,
+				<&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
+				<&cmu_top CLK_SCLK_MMC2_FSYS>,
+				<&cmu_top CLK_SCLK_MMC1_FSYS>,
+				<&cmu_top CLK_SCLK_MMC0_FSYS>,
+				<&cmu_top CLK_SCLK_USBHOST30_FSYS>,
+				<&cmu_top CLK_SCLK_USBDRD30_FSYS>;
+		};
+
+		cmu_g2d: clock-controller@12460000 {
+			compatible = "samsung,exynos5433-cmu-g2d";
+			reg = <0x12460000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_g2d_266",
+				"aclk_g2d_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_G2D_266>,
+				<&cmu_top CLK_ACLK_G2D_400>;
+			power-domains = <&pd_g2d>;
+		};
+
+		cmu_disp: clock-controller@13b90000 {
+			compatible = "samsung,exynos5433-cmu-disp";
+			reg = <0x13b90000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_dsim1_disp",
+				"sclk_dsim0_disp",
+				"sclk_dsd_disp",
+				"sclk_decon_tv_eclk_disp",
+				"sclk_decon_vclk_disp",
+				"sclk_decon_eclk_disp",
+				"sclk_decon_tv_vclk_disp",
+				"aclk_disp_333";
+			clocks = <&xxti>,
+				<&cmu_mif CLK_SCLK_DSIM1_DISP>,
+				<&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				<&cmu_mif CLK_SCLK_DSD_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				<&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
+				<&cmu_mif CLK_ACLK_DISP_333>;
+			power-domains = <&pd_disp>;
+		};
+
+		cmu_aud: clock-controller@114c0000 {
+			compatible = "samsung,exynos5433-cmu-aud";
+			reg = <0x114c0000 0x1000>;
+			#clock-cells = <1>;
+			clock-names = "oscclk", "fout_aud_pll";
+			clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
+			power-domains = <&pd_aud>;
+		};
+
+		cmu_bus0: clock-controller@13600000 {
+			compatible = "samsung,exynos5433-cmu-bus0";
+			reg = <0x13600000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus0_400";
+			clocks = <&cmu_top CLK_ACLK_BUS0_400>;
+		};
+
+		cmu_bus1: clock-controller@14800000 {
+			compatible = "samsung,exynos5433-cmu-bus1";
+			reg = <0x14800000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "aclk_bus1_400";
+			clocks = <&cmu_top CLK_ACLK_BUS1_400>;
+		};
+
+		cmu_bus2: clock-controller@13400000 {
+			compatible = "samsung,exynos5433-cmu-bus2";
+			reg = <0x13400000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_bus2_400";
+			clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
+		};
+
+		cmu_g3d: clock-controller@14aa0000 {
+			compatible = "samsung,exynos5433-cmu-g3d";
+			reg = <0x14aa0000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_g3d_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
+			power-domains = <&pd_g3d>;
+		};
+
+		cmu_gscl: clock-controller@13cf0000 {
+			compatible = "samsung,exynos5433-cmu-gscl";
+			reg = <0x13cf0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_gscl_111",
+				"aclk_gscl_333";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_GSCL_111>,
+				<&cmu_top CLK_ACLK_GSCL_333>;
+			power-domains = <&pd_gscl>;
+		};
+
+		cmu_apollo: clock-controller@11900000 {
+			compatible = "samsung,exynos5433-cmu-apollo";
+			reg = <0x11900000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_apollo";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
+		};
+
+		cmu_atlas: clock-controller@11800000 {
+			compatible = "samsung,exynos5433-cmu-atlas";
+			reg = <0x11800000 0x2000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "sclk_bus_pll_atlas";
+			clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
+		};
+
+		cmu_mscl: clock-controller@150d0000 {
+			compatible = "samsung,exynos5433-cmu-mscl";
+			reg = <0x150d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_jpeg_mscl",
+				"aclk_mscl_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_JPEG_MSCL>,
+				<&cmu_top CLK_ACLK_MSCL_400>;
+			power-domains = <&pd_mscl>;
+		};
+
+		cmu_mfc: clock-controller@15280000 {
+			compatible = "samsung,exynos5433-cmu-mfc";
+			reg = <0x15280000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_mfc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
+			power-domains = <&pd_mfc>;
+		};
+
+		cmu_hevc: clock-controller@14f80000 {
+			compatible = "samsung,exynos5433-cmu-hevc";
+			reg = <0x14f80000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk", "aclk_hevc_400";
+			clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
+			power-domains = <&pd_hevc>;
+		};
+
+		cmu_isp: clock-controller@146d0000 {
+			compatible = "samsung,exynos5433-cmu-isp";
+			reg = <0x146d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_isp_dis_400",
+				"aclk_isp_400";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_ISP_DIS_400>,
+				<&cmu_top CLK_ACLK_ISP_400>;
+			power-domains = <&pd_isp>;
+		};
+
+		cmu_cam0: clock-controller@120d0000 {
+			compatible = "samsung,exynos5433-cmu-cam0";
+			reg = <0x120d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_cam0_333",
+				"aclk_cam0_400",
+				"aclk_cam0_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_ACLK_CAM0_333>,
+				<&cmu_top CLK_ACLK_CAM0_400>,
+				<&cmu_top CLK_ACLK_CAM0_552>;
+			power-domains = <&pd_cam0>;
+		};
+
+		cmu_cam1: clock-controller@145d0000 {
+			compatible = "samsung,exynos5433-cmu-cam1";
+			reg = <0x145d0000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"sclk_isp_uart_cam1",
+				"sclk_isp_spi1_cam1",
+				"sclk_isp_spi0_cam1",
+				"aclk_cam1_333",
+				"aclk_cam1_400",
+				"aclk_cam1_552";
+			clocks = <&xxti>,
+				<&cmu_top CLK_SCLK_ISP_UART_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
+				<&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
+				<&cmu_top CLK_ACLK_CAM1_333>,
+				<&cmu_top CLK_ACLK_CAM1_400>,
+				<&cmu_top CLK_ACLK_CAM1_552>;
+			power-domains = <&pd_cam1>;
+		};
+
+		cmu_imem: clock-controller@11060000 {
+			compatible = "samsung,exynos5433-cmu-imem";
+			reg = <0x11060000 0x1000>;
+			#clock-cells = <1>;
+
+			clock-names = "oscclk",
+				"aclk_imem_sssx_266",
+				"aclk_imem_266",
+				"aclk_imem_200";
+			clocks = <&xxti>,
+				<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
+				<&cmu_top CLK_DIV_ACLK_IMEM_266>,
+				<&cmu_top CLK_DIV_ACLK_IMEM_200>;
+		};
+
+		slim_sss: slim-sss@11140000 {
+			compatible = "samsung,exynos5433-slim-sss";
+			reg = <0x11140000 0x1000>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk";
+			clocks = <&cmu_imem CLK_PCLK_SLIMSSS>,
+				 <&cmu_imem CLK_ACLK_SLIMSSS>;
+		};
+
+		pd_gscl: power-domain@105c4000 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4000 0x20>;
+			#power-domain-cells = <0>;
+			label = "GSCL";
+		};
+
+		pd_cam0: power-domain@105c4020 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4020 0x20>;
+			#power-domain-cells = <0>;
+			power-domains = <&pd_cam1>;
+			label = "CAM0";
+		};
+
+		pd_mscl: power-domain@105c4040 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4040 0x20>;
+			#power-domain-cells = <0>;
+			label = "MSCL";
+		};
+
+		pd_g3d: power-domain@105c4060 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4060 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
+
+		pd_disp: power-domain@105c4080 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4080 0x20>;
+			#power-domain-cells = <0>;
+			label = "DISP";
+		};
+
+		pd_cam1: power-domain@105c40a0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c40a0 0x20>;
+			#power-domain-cells = <0>;
+			label = "CAM1";
+		};
+
+		pd_aud: power-domain@105c40c0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c40c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "AUD";
+		};
+
+		pd_g2d: power-domain@105c4120 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4120 0x20>;
+			#power-domain-cells = <0>;
+			label = "G2D";
+		};
+
+		pd_isp: power-domain@105c4140 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4140 0x20>;
+			#power-domain-cells = <0>;
+			power-domains = <&pd_cam0>;
+			label = "ISP";
+		};
+
+		pd_mfc: power-domain@105c4180 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c4180 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
+
+		pd_hevc: power-domain@105c41c0 {
+			compatible = "samsung,exynos5433-pd";
+			reg = <0x105c41c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "HEVC";
+		};
+
+		tmu_atlas0: tmu@10060000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_atlas1: tmu@10068000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10068000 0x200>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU0>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_g3d: tmu@10070000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10070000 0x200>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_apollo: tmu@10078000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x10078000 0x200>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		tmu_isp: tmu@1007c000 {
+			compatible = "samsung,exynos5433-tmu";
+			reg = <0x1007c000 0x200>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
+				<&cmu_peris CLK_SCLK_TMU1>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@101c0000 {
+			compatible = "samsung,exynos5433-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x101c0000 0x800>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		ppmu_d0_cpu: ppmu@10480000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x10480000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d0_general: ppmu@10490000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x10490000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_cpu: ppmu@104b0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_d1_general: ppmu@104c0000 {
+			compatible = "samsung,exynos-ppmu-v2";
+			reg = <0x104c0000 0x2000>;
+			status = "disabled";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_aud: pinctrl@114b0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x114b0000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_aud>;
+		};
+
+		pinctrl_cpif: pinctrl@10fe0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x10fe0000 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_finger: pinctrl@14cb0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cb0000 0x1000>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys: pinctrl@15690000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_imem: pinctrl@11090000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x11090000 0x1000>;
+			interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric: pinctrl@14cc0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14cc0000 0x1100>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos5433-pinctrl";
+			reg = <0x14ce0000 0x1100>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos5433-pmu", "simple-mfd", "syscon";
+			reg = <0x105c0000 0x5008>;
+			#clock-cells = <1>;
+			clock-names = "clkout16";
+			clocks = <&xxti>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5433-mipi-video-phy";
+				#phy-cells = <1>;
+				samsung,cam0-sysreg = <&syscon_cam0>;
+				samsung,cam1-sysreg = <&syscon_cam1>;
+				samsung,disp-sysreg = <&syscon_disp>;
+			};
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x400>; /* SWRESET */
+				mask = <0x1>;
+			};
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x11001000 0x1000>,
+				<0x11002000 0x2000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+			interrupts = <GIC_PPI 9 0xf04>;
+		};
+
+		decon: decon@13800000 {
+			compatible = "samsung,exynos5433-decon";
+			reg = <0x13800000 0x2104>;
+			clocks = <&cmu_disp CLK_PCLK_DECON>,
+				<&cmu_disp CLK_ACLK_DECON>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_ACLK_XIU_DECON1X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_SCLK_DECON_VCLK>,
+				<&cmu_disp CLK_SCLK_DECON_ECLK>,
+				<&cmu_disp CLK_SCLK_DSD>;
+			clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+				"aclk_xiu_decon0x", "pclk_smmu_decon0x",
+				"aclk_smmu_decon1x", "aclk_xiu_decon1x",
+				"pclk_smmu_decon1x", "sclk_decon_vclk",
+				"sclk_decon_eclk", "dsd";
+			power-domains = <&pd_disp>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,disp-sysreg = <&syscon_disp>;
+			status = "disabled";
+			iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+			iommu-names = "m0", "m1";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					decon_to_mic: endpoint {
+						remote-endpoint =
+							<&mic_to_decon>;
+					};
+				};
+			};
+		};
+
+		decon_tv: decon@13880000 {
+			compatible = "samsung,exynos5433-decon-tv";
+			reg = <0x13880000 0x20b8>;
+			clocks = <&cmu_disp CLK_PCLK_DECON_TV>,
+				 <&cmu_disp CLK_ACLK_DECON_TV>,
+				 <&cmu_disp CLK_ACLK_SMMU_TV0X>,
+				 <&cmu_disp CLK_ACLK_XIU_TV0X>,
+				 <&cmu_disp CLK_PCLK_SMMU_TV0X>,
+				 <&cmu_disp CLK_ACLK_SMMU_TV1X>,
+				 <&cmu_disp CLK_ACLK_XIU_TV1X>,
+				 <&cmu_disp CLK_PCLK_SMMU_TV1X>,
+				 <&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
+				 <&cmu_disp CLK_SCLK_DECON_TV_ECLK>,
+				 <&cmu_disp CLK_SCLK_DSD>;
+			clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
+				      "aclk_xiu_decon0x", "pclk_smmu_decon0x",
+				      "aclk_smmu_decon1x", "aclk_xiu_decon1x",
+				      "pclk_smmu_decon1x", "sclk_decon_vclk",
+				      "sclk_decon_eclk", "dsd";
+			samsung,disp-sysreg = <&syscon_disp>;
+			power-domains = <&pd_disp>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>;
+			iommu-names = "m0", "m1";
+		};
+
+		dsi: dsi@13900000 {
+			compatible = "samsung,exynos5433-mipi-dsi";
+			reg = <0x13900000 0xc0>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+				<&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+				<&cmu_disp CLK_SCLK_DSIM0>;
+			clock-names = "bus_clk",
+					"phyclk_mipidphy0_bitclkdiv8",
+					"phyclk_mipidphy0_rxclkesc0",
+					"sclk_rgb_vclk_to_dsim0",
+					"sclk_mipi";
+			power-domains = <&pd_disp>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_to_mic: endpoint {
+						remote-endpoint = <&mic_to_dsi>;
+					};
+				};
+			};
+		};
+
+		mic: mic@13930000 {
+			compatible = "samsung,exynos5433-mic";
+			reg = <0x13930000 0x48>;
+			clocks = <&cmu_disp CLK_PCLK_MIC0>,
+				<&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+			clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+			power-domains = <&pd_disp>;
+			samsung,disp-syscon = <&syscon_disp>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					mic_to_decon: endpoint {
+						remote-endpoint =
+							<&decon_to_mic>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					mic_to_dsi: endpoint {
+						remote-endpoint = <&dsi_to_mic>;
+					};
+				};
+			};
+		};
+
+		hdmi: hdmi@13970000 {
+			compatible = "samsung,exynos5433-hdmi";
+			reg = <0x13970000 0x70000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_disp CLK_PCLK_HDMI>,
+				<&cmu_disp CLK_PCLK_HDMIPHY>,
+				<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+				<&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+				<&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+				<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+				<&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+				<&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+				<&xxti>, <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+			clock-names = "hdmi_pclk", "hdmi_i_pclk",
+				"i_tmds_clk", "i_pixel_clk",
+				"tmds_clko", "tmds_clko_user",
+				"pixel_clko", "pixel_clko_user",
+				"oscclk", "i_spdif_clk";
+			phy = <&hdmiphy>;
+			ddc = <&hsi2c_11>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,sysreg-phandle = <&syscon_disp>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		hdmiphy: hdmiphy@13af0000 {
+			reg = <0x13af0000 0x80>;
+		};
+
+		syscon_disp: syscon@13b80000 {
+			compatible = "samsung,exynos5433-disp-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x13b80000 0x1010>;
+		};
+
+		syscon_cam0: syscon@120f0000 {
+			compatible = "samsung,exynos5433-cam0-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x120f0000 0x1020>;
+		};
+
+		syscon_cam1: syscon@145f0000 {
+			compatible = "samsung,exynos5433-cam1-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x145f0000 0x1038>;
+		};
+
+		syscon_fsys: syscon@156f0000 {
+			compatible = "samsung,exynos5433-fsys-sysreg",
+				     "samsung,exynos5433-sysreg", "syscon";
+			reg = <0x156f0000 0x1044>;
+		};
+
+		gsc_0: video-scaler@13c00000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c00000 0x1000>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend", "gsd";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL0>,
+				 <&cmu_gscl CLK_ACLK_GSCL0>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+				 <&cmu_gscl CLK_ACLK_GSD>;
+			iommus = <&sysmmu_gscl0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		gsc_1: video-scaler@13c10000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c10000 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend", "gsd";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL1>,
+				 <&cmu_gscl CLK_ACLK_GSCL1>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+				 <&cmu_gscl CLK_ACLK_GSD>;
+			iommus = <&sysmmu_gscl1>;
+			power-domains = <&pd_gscl>;
+		};
+
+		gsc_2: video-scaler@13c20000 {
+			compatible = "samsung,exynos5433-gsc";
+			reg = <0x13c20000 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu",
+				      "aclk_gsclbend", "gsd";
+			clocks = <&cmu_gscl CLK_PCLK_GSCL2>,
+				 <&cmu_gscl CLK_ACLK_GSCL2>,
+				 <&cmu_gscl CLK_ACLK_XIU_GSCLX>,
+				 <&cmu_gscl CLK_ACLK_GSCLBEND_333>,
+				 <&cmu_gscl CLK_ACLK_GSD>;
+			iommus = <&sysmmu_gscl2>;
+			power-domains = <&pd_gscl>;
+		};
+
+		gpu: gpu@14ac0000 {
+			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			reg = <0x14ac0000 0x5000>;
+			interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&cmu_g3d CLK_ACLK_G3D>;
+			clock-names = "core";
+			power-domains = <&pd_g3d>;
+			operating-points-v2 = <&gpu_opp_table>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <1025000>;
+				};
+				opp-420000000 {
+					opp-hz = /bits/ 64 <420000000>;
+					opp-microvolt = <1025000>;
+				};
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-microvolt = <1075000>;
+				};
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-microvolt = <1125000>;
+				};
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-microvolt = <1150000>;
+				};
+				opp-700000000 {
+					opp-hz = /bits/ 64 <700000000>;
+					opp-microvolt = <1150000>;
+				};
+			};
+		};
+
+		scaler_0: scaler@15000000 {
+			compatible = "samsung,exynos5433-scaler";
+			reg = <0x15000000 0x1294>;
+			interrupts = <0 402 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mscl CLK_PCLK_M2MSCALER0>,
+				 <&cmu_mscl CLK_ACLK_M2MSCALER0>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>;
+			iommus = <&sysmmu_scaler_0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		scaler_1: scaler@15010000 {
+			compatible = "samsung,exynos5433-scaler";
+			reg = <0x15010000 0x1294>;
+			interrupts = <0 403 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mscl CLK_PCLK_M2MSCALER1>,
+				 <&cmu_mscl CLK_ACLK_M2MSCALER1>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>;
+			iommus = <&sysmmu_scaler_1>;
+			power-domains = <&pd_mscl>;
+		};
+
+		jpeg: codec@15020000 {
+			compatible = "samsung,exynos5433-jpeg";
+			reg = <0x15020000 0x10000>;
+			interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+			clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+				 <&cmu_mscl CLK_ACLK_JPEG>,
+				 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+				 <&cmu_mscl CLK_SCLK_JPEG>;
+			iommus = <&sysmmu_jpeg>;
+			power-domains = <&pd_mscl>;
+		};
+
+		mfc: codec@152e0000 {
+			compatible = "samsung,exynos5433-mfc";
+			reg = <0x152e0000 0x10000>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "pclk", "aclk", "aclk_xiu";
+			clocks = <&cmu_mfc CLK_PCLK_MFC>,
+				 <&cmu_mfc CLK_ACLK_MFC>,
+				 <&cmu_mfc CLK_ACLK_XIU_MFCX>;
+			iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>;
+			iommu-names = "left", "right";
+			power-domains = <&pd_mfc>;
+		};
+
+		sysmmu_decon0x: sysmmu@13a00000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a00000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON0X>;
+			power-domains = <&pd_disp>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_decon1x: sysmmu@13a10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a10000 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+				<&cmu_disp CLK_PCLK_SMMU_DECON1X>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_disp>;
+		};
+
+		sysmmu_tv0x: sysmmu@13a20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a20000 0x1000>;
+			interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_TV0X>,
+				<&cmu_disp CLK_PCLK_SMMU_TV0X>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_disp>;
+		};
+
+		sysmmu_tv1x: sysmmu@13a30000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13a30000 0x1000>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_disp CLK_ACLK_SMMU_TV1X>,
+				<&cmu_disp CLK_PCLK_SMMU_TV1X>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_disp>;
+		};
+
+		sysmmu_gscl0: sysmmu@13c80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13c80000 0x1000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL0>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		sysmmu_gscl1: sysmmu@13c90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13c90000 0x1000>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL1>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		sysmmu_gscl2: sysmmu@13ca0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13ca0000 0x1000>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
+				 <&cmu_gscl CLK_PCLK_SMMU_GSCL2>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_gscl>;
+		};
+
+		sysmmu_scaler_0: sysmmu@15040000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15040000 0x1000>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>,
+				<&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		sysmmu_scaler_1: sysmmu@15050000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15050000 0x1000>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>,
+				<&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		sysmmu_jpeg: sysmmu@15060000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15060000 0x1000>;
+			interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mscl CLK_ACLK_SMMU_JPEG>,
+				<&cmu_mscl CLK_PCLK_SMMU_JPEG>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mscl>;
+		};
+
+		sysmmu_mfc_0: sysmmu@15200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15200000 0x1000>;
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_0>,
+				<&cmu_mfc CLK_PCLK_SMMU_MFC_0>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mfc>;
+		};
+
+		sysmmu_mfc_1: sysmmu@15210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x15210000 0x1000>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "aclk", "pclk";
+			clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_1>,
+				<&cmu_mfc CLK_PCLK_SMMU_MFC_1>;
+			#iommu-cells = <0>;
+			power-domains = <&pd_mfc>;
+		};
+
+		serial_0: serial@14c10000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c10000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART0>,
+				<&cmu_peric CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART1>,
+				<&cmu_peric CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_UART2>,
+				<&cmu_peric CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@14d20000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d20000 0x100>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_SPI0>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14d30000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d30000 0x100>;
+			interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 11>, <&pdma0 10>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_SPI1>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14d40000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d40000 0x100>;
+			interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 13>, <&pdma0 12>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_SPI2>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_3: spi@14d50000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d50000 0x100>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 23>, <&pdma0 22>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_SPI3>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI3>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_4: spi@14d00000 {
+			compatible = "samsung,exynos5433-spi";
+			reg = <0x14d00000 0x100>;
+			interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 25>, <&pdma0 24>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_peric CLK_PCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_SPI4>,
+				<&cmu_peric CLK_SCLK_IOCLK_SPI4>;
+			clock-names = "spi", "spi_busclk0", "spi_ioclk";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi4_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		adc: adc@14d10000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x14d10000 0x100>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "adc";
+			clocks = <&cmu_peric CLK_PCLK_ADCIF>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		i2s1: i2s@14d60000 {
+			compatible = "samsung,exynos7-i2s";
+			reg = <0x14d60000 0x100>;
+			dmas = <&pdma0 31>, <&pdma0 30>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peric CLK_PCLK_I2S1>,
+				 <&cmu_peric CLK_PCLK_I2S1>,
+				 <&cmu_peric CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		pwm: pwm@14dd0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x14dd0000 0x100>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			clocks = <&cmu_peric CLK_PCLK_PWM>;
+			clock-names = "timers";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		hsi2c_0: i2c@14e40000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e40000 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@14e50000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e50000 0x1000>;
+			interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@14ec0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ec0000 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@14ed0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ed0000 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14ee0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ee0000 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@14ef0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14ef0000 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: i2c@14d90000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14d90000 0x1000>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: i2c@14da0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14da0000 0x1000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: i2c@14de0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14de0000 0x1000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: i2c@14df0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14df0000 0x1000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&cmu_peric CLK_PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		usbdrd30: usb@15400000 {
+			compatible = "samsung,exynos5433-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>;
+			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x15400000 0x10000>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_fsys CLK_SCLK_USBDRD30>,
+					<&cmu_fsys CLK_ACLK_USBDRD30>,
+					<&cmu_fsys CLK_SCLK_USBDRD30>;
+				clock-names = "ref", "bus_early", "suspend";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd30_phy: phy@15500000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBDRD30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30_phy: phy@15580000 {
+			compatible = "samsung,exynos5433-usbdrd-phy";
+			reg = <0x15580000 0x100>;
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe",
+					"itp";
+			#phy-cells = <1>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		usbhost30: usb@15a00000 {
+			compatible = "samsung,exynos5433-dwusb3";
+			clocks = <&cmu_fsys CLK_ACLK_USBHOST30>,
+				<&cmu_fsys CLK_SCLK_USBHOST30>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>,
+				<&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>;
+			clock-names = "aclk", "susp_clk", "phyclk", "pipe_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x15a00000 0x10000>;
+			status = "disabled";
+
+			usbhost_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_fsys CLK_SCLK_USBHOST30>,
+					<&cmu_fsys CLK_ACLK_USBHOST30>,
+					<&cmu_fsys CLK_SCLK_USBHOST30>;
+				clock-names = "ref", "bus_early", "suspend";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		mshc_0: mmc@15540000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15540000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC0>,
+				<&cmu_fsys CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_1: mmc@15550000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15550000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC1>,
+				<&cmu_fsys CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mshc_2: mmc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&cmu_fsys CLK_ACLK_MMC2>,
+				<&cmu_fsys CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		pdma0: dma-controller@15610000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15610000 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@15600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15600000 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		audio-subsystem@11400000 {
+			compatible = "samsung,exynos5433-lpass";
+			reg = <0x11400000 0x100>, <0x11500000 0x08>;
+			clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+			clock-names = "sfr0_ctrl";
+			power-domains = <&pd_aud>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			adma: dma-controller@11420000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x11420000 0x1000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_aud CLK_ACLK_DMAC>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				power-domains = <&pd_aud>;
+			};
+
+			i2s0: i2s@11440000 {
+				compatible = "samsung,exynos7-i2s";
+				reg = <0x11440000 0x100>;
+				dmas = <&adma 0>, <&adma 2>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_AUD_I2S>,
+					<&cmu_aud CLK_SCLK_I2S_BCLK>;
+				clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+				#clock-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				power-domains = <&pd_aud>;
+				#sound-dai-cells = <1>;
+				status = "disabled";
+			};
+
+			serial_3: serial@11460000 {
+				compatible = "samsung,exynos5433-uart";
+				reg = <0x11460000 0x100>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+					<&cmu_aud CLK_SCLK_AUD_UART>;
+				clock-names = "uart", "clk_uart_baud0";
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart_aud_bus>;
+				power-domains = <&pd_aud>;
+				status = "disabled";
+			};
+		};
+
+		pcie_phy: pcie-phy@15680000 {
+			compatible = "samsung,exynos5433-pcie-phy";
+			reg = <0x15680000 0x1000>;
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			samsung,fsys-sysreg = <&syscon_fsys>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie: pcie@15700000 {
+			compatible = "samsung,exynos5433-pcie";
+			reg = <0x15700000 0x1000>, <0x156b0000 0x1000>,
+			      <0x0c000000 0x1000>;
+			reg-names = "dbi", "elbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PCIE>,
+				 <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+			clock-names = "pcie", "pcie_bus";
+			num-lanes = <1>;
+			num-viewport = <3>;
+			bus-range = <0x00 0xff>;
+			phys = <&pcie_phy>;
+			ranges = <0x81000000 0 0	  0x0c001000 0 0x00010000>,
+				 <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+			status = "disabled";
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
+
+#include "exynos5433-bus.dtsi"
+#include "exynos5433-pinctrl.dtsi"
+#include "exynos5433-tmu.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
new file mode 100644
index 000000000..1f2eddceb
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on Exynos7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
+		serial0 = &serial_2;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xc0000000>;
+	};
+
+	usb30_vbus_reg: regulator-usb30 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_vbus_en>;
+		enable-active-high;
+	};
+
+	usb3drd_boost_5v: regulator-usb3drd-boost {
+		compatible = "regulator-fixed";
+		regulator-name = "VUSB_VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3drd_boost_en>;
+		enable-active-high;
+	};
+
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&buck6_reg>;
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps15-pmic";
+		reg = <0x66>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpa0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+		wakeup-source;
+
+		s2mps15_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vqmmc-sdcard";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1110000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <2250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vmmc-sdcard";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_ldo18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_ldo19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_ldo23";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1470000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_atlas";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_buck7";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_buck8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_buck9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_buck10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+		};
+	};
+};
+
+&pinctrl_alive {
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	vmmc-supply = <&ldo17_reg>;
+	vqmmc-supply = <&ldo2_reg>;
+	disable-wp;
+};
+
+&pinctrl_bus1 {
+	usb30_vbus_en: usb30-vbus-en-pins {
+		samsung,pins = "gph1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	usb3drd_boost_en: usb3drd-boost-en-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&ufs {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd10-supply = <&ldo4_reg>;
+	vdd33-supply = <&ldo6_reg>;
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb30_vbus_reg>;
+	vbus-boost-supply = <&usb3drd_boost_5v>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
new file mode 100644
index 000000000..ee9c24a22
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -0,0 +1,702 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_bus0 {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd5: gpd5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus-pins {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpd5-0", "gpd5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_ff {
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_ese {
+	gpv7: gpv7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpr4: gpr4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpr0: gpr0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_ds: sd0-ds-pins {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_qrdy: sd0-qrdy-pins {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_ds: sd1-ds-pins {
+		samsung,pins = "gpr2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
+	};
+
+	sd1_qrdy: sd1-qrdy-pins {
+		samsung,pins = "gpr2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
+	};
+
+	sd1_int: sd1-int-pins {
+		samsung,pins = "gpr2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+
+	sd1_bus8: sd1-bus-width8-pins {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_bus1 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv6: gpv6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpg2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gph1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
new file mode 100644
index 000000000..d3301b8bd
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for default Exynos7 thermal zone definition
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+trips {
+	cpu-alert-0 {
+		temperature = <75000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-1 {
+		temperature = <80000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-2 {
+		temperature = <85000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-3 {
+		temperature = <90000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-4 {
+		temperature = <95000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-5 {
+		temperature = <100000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-alert-6 {
+		temperature = <110000>; /* millicelsius */
+		hysteresis = <10000>; /* millicelsius */
+		type = "passive";
+	};
+	cpu-crit-0 {
+		temperature = <115000>; /* millicelsius */
+		hysteresis = <0>; /* millicelsius */
+		type = "critical";
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
new file mode 100644
index 000000000..54ed5167d
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_bus0;
+		pinctrl2 = &pinctrl_nfc;
+		pinctrl3 = &pinctrl_touch;
+		pinctrl4 = &pinctrl_ff;
+		pinctrl5 = &pinctrl_ese;
+		pinctrl6 = &pinctrl_fsys0;
+		pinctrl7 = &pinctrl_fsys1;
+		pinctrl8 = &pinctrl_bus1;
+		tmuctrl0 = &tmuctrl_0;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>,
+				     <&cpu_atlas2>, <&cpu_atlas3>;
+	};
+
+	fin_pll: clock {
+		/* XXTI */
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu_atlas0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		cpu_atlas1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		cpu_atlas2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		cpu_atlas3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x11001000 0x1000>,
+			      <0x11002000 0x2000>,
+			      <0x11004000 0x2000>,
+			      <0x11006000 0x2000>;
+		};
+
+		pdma0: dma-controller@10e10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10e10000 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@10eb0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10eb0000 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		clock_topc: clock-controller@10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller@105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>,
+				 <&clock_topc DOUT_SCLK_AUD_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll", "dout_sclk_aud_pll";
+		};
+
+		clock_top1: clock-controller@105e0000 {
+			compatible = "samsung,exynos7-clock-top1";
+			reg = <0x105e0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll";
+		};
+
+		clock_ccore: clock-controller@105b0000 {
+			compatible = "samsung,exynos7-clock-ccore";
+			reg = <0x105b0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>;
+			clock-names = "fin_pll", "dout_aclk_ccore_133";
+		};
+
+		clock_peric0: clock-controller@13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>,
+				 <&clock_top0 CLK_SCLK_UART0>;
+			clock-names = "fin_pll", "dout_aclk_peric0_66",
+				      "sclk_uart0";
+		};
+
+		clock_peric1: clock-controller@14c80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top0 DOUT_ACLK_PERIC1>,
+				 <&clock_top0 CLK_SCLK_UART1>,
+				 <&clock_top0 CLK_SCLK_UART2>,
+				 <&clock_top0 CLK_SCLK_UART3>,
+				 <&clock_top0 CLK_SCLK_SPI0>,
+				 <&clock_top0 CLK_SCLK_SPI1>,
+				 <&clock_top0 CLK_SCLK_SPI2>,
+				 <&clock_top0 CLK_SCLK_SPI3>,
+				 <&clock_top0 CLK_SCLK_SPI4>,
+				 <&clock_top0 CLK_SCLK_I2S1>,
+				 <&clock_top0 CLK_SCLK_PCM1>,
+				 <&clock_top0 CLK_SCLK_SPDIF>;
+			clock-names = "fin_pll",
+				      "dout_aclk_peric1_66",
+				      "sclk_uart1",
+				      "sclk_uart2",
+				      "sclk_uart3",
+				      "sclk_spi0",
+				      "sclk_spi1",
+				      "sclk_spi2",
+				      "sclk_spi3",
+				      "sclk_spi4",
+				      "sclk_i2s1",
+				      "sclk_pcm1",
+				      "sclk_spdif";
+		};
+
+		clock_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>;
+			clock-names = "fin_pll", "dout_aclk_peris_66";
+		};
+
+		clock_fsys0: clock-controller@10e90000 {
+			compatible = "samsung,exynos7-clock-fsys0";
+			reg = <0x10e90000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>,
+				 <&clock_top1 DOUT_SCLK_MMC2>;
+			clock-names = "fin_pll", "dout_aclk_fsys0_200",
+				      "dout_sclk_mmc2";
+		};
+
+		clock_fsys1: clock-controller@156e0000 {
+			compatible = "samsung,exynos7-clock-fsys1";
+			reg = <0x156e0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
+				 <&clock_top1 DOUT_SCLK_MMC0>,
+				 <&clock_top1 DOUT_SCLK_MMC1>,
+				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
+			clock-names = "fin_pll", "dout_aclk_fsys1_200",
+				      "dout_sclk_mmc0", "dout_sclk_mmc1",
+				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
+				      "dout_sclk_phy_fsys1_26m";
+		};
+
+		serial_0: serial@13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric0 PCLK_UART0>,
+				 <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric1 PCLK_UART1>,
+				 <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric1 PCLK_UART2>,
+				 <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric1 PCLK_UART3>,
+				 <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10580000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_bus0: pinctrl@13470000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x13470000 0x1000>;
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ce0000 0x1000>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ff: pinctrl@14c90000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14c90000 0x1000>;
+			interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@10e60000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10e60000 0x1000>;
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@15690000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_bus1: pinctrl@14870000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14870000 0x1000>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsi2c_0: i2c@13640000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13640000 0x1000>;
+			interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@13650000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13650000 0x1000>;
+			interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@13660000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13660000 0x1000>;
+			interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@13670000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13670000 0x1000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14e00000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e00000 0x1000>;
+			interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@13e10000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: i2c@14e20000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e20000 0x1000>;
+			interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: i2c@13680000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13680000 0x1000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: i2c@13690000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13690000 0x1000>;
+			interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: i2c@136a0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x136a0000 0x1000>;
+			interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x105c0000 0x5000>;
+		};
+
+		rtc: rtc@10590000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10590000 0x100>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_ccore PCLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peris PCLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		gpu: gpu@14ac0000 {
+			compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+			reg = <0x14ac0000 0x5000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			status = "disabled";
+			/* TODO: operating points for DVFS, cooling device */
+		};
+
+		mmc_0: mmc@15740000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15740000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC0>,
+				 <&clock_top1 CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@15750000 {
+			compatible = "samsung,exynos7-dw-mshc";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15750000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC1>,
+				 <&clock_top1 CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&clock_fsys0 ACLK_MMC2>,
+				 <&clock_top1 CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		adc: adc@13620000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x13620000 0x100>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peric0 PCLK_ADCIF>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pwm: pwm@136c0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x136c0000 0x100>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric0 PCLK_PWM>;
+			clock-names = "timers";
+		};
+
+		tmuctrl_0: tmu@10060000 {
+			compatible = "samsung,exynos7-tmu";
+			reg = <0x10060000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peris PCLK_TMU>,
+				 <&clock_peris SCLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_sclk";
+			#thermal-sensor-cells = <0>;
+		};
+
+		ufs: ufs@15570000 {
+			compatible = "samsung,exynos7-ufs";
+			reg = <0x15570000 0x100>,  /* 0: HCI standard */
+				<0x15570100 0x100>,  /* 1: Vendor specificed */
+				<0x15571000 0x200>,  /* 2: UNIPRO */
+				<0x15572000 0x300>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@15571800 {
+			compatible = "samsung,exynos7-ufs-phy";
+			reg = <0x15571800 0x240>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+			clock-names = "ref_clk", "rx1_symbol_clk",
+				      "rx0_symbol_clk",
+				      "tx0_symbol_clk";
+		};
+
+		usbdrd_phy: phy@15500000 {
+			compatible = "samsung,exynos7-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+			       <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd: usb@15400000 {
+			compatible = "samsung,exynos7-dwusb3";
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+			       <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk",
+				"usbdrd30_axius_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x15400000 0x10000>;
+
+			usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+	};
+
+	thermal-zones {
+		atlas_thermal: cluster0-thermal {
+			polling-delay-passive = <0>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos7-trip-points.dtsi"
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+#include "exynos7-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
new file mode 100644
index 000000000..47a389d9f
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ */
+
+/dts-v1/;
+#include "exynos7885.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A8 (2018)";
+	compatible = "samsung,jackpotlte", "samsung,exynos7885";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc_0;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3da00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_volup &key_voldown &key_power>;
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	bus-width = <8>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk_fast_slew_rate_3x &sd0_cmd &sd0_rdqs
+		     &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
new file mode 100644
index 000000000..34bb12191
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7885 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ *
+ * Samsung's Exynos7885 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sim1_det_gpio: sim1-det-gpio-pins {
+		samsung,pins = "gpa2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sim0_det_gpio: sim0-det-gpio-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* UART_DEBUG */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpq0-4", "gpq0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_bus: aud-codec-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_bus_idle: aud-codec-bus-idle-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_loopback_bus: aud-loopback-bus-pins {
+		samsung,pins = "gpb1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_loopback_bus_idle: aud-loopback-bus-idle-pins {
+		samsung,pins = "gpb1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_bus: aud-fm-bus-pins {
+		samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_bus_idle: aud-fm-bus-idle-pins {
+		samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_spk_bus: aud-spk-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_spk_bus_idle: aud-spk-bus-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_fsys {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_clk_fast_slew_rate_1x: sd1-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd1_clk_fast_slew_rate_2x: sd1-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd1_clk_fast_slew_rate_3x: sd1-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_clk_fast_slew_rate_4x: sd1-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpf3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpf3-3", "gpf3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf4-3", "gpf4-4", "gpf4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_top {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpc1-5", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpc1-7", "gpc1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 UART */
+	uart3_bus_single: uart3-bus-single-pins {
+		samsung,pins = "gpc2-3", "gpc2-2", "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI0 UART_HSI2C1 */
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI0 HSI2C0 */
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 HSI2C1 */
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 SPI */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0", "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI1 UART */
+	uart4_bus_single: uart4-bus-single-pins {
+		samsung,pins = "gpc2-7", "gpc2-6", "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI1 UART_HSI2C1*/
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI1 HSI2C0 */
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI1 HSI2C1 */
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI1 SPI */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4", "gpc2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	fm_lna_en: fm-lna-en-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-val = <1>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpg1-3", "gpg1-2", "gpg1-1", "gpg1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpg1-5", "gpg1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	aud_dmic_on: aud-dmic-on-pins {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-val = <1>;
+	};
+
+	aud_dmic_off: aud-dmic-off-pins {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-val = <0>;
+	};
+
+	/* UART_HEALTH */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-3", "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpp1-3", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpp4-3", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* SPI_ESE */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* SPI_FP */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI2 UART */
+	uart5_bus_single: uart5-bus-single-pins {
+		samsung,pins = "gpp8-1", "gpp8-0", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	  };
+
+	/* USI2 UART_HSI2C1 */
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI2 HSI2C0 */
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI2 HSI2C1 */
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI2 SPI */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp7-1", "gpp7-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
new file mode 100644
index 000000000..d69fc2392
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7885 SoC device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ */
+
+#include <dt-bindings/clock/exynos7885.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7885";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_fsys;
+		pinctrl3 = &pinctrl_top;
+	};
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>,
+				     <&cpu5>;
+	};
+
+	arm-a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu6>,
+				     <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fixed-rate-clocks {
+		oscclk: osc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "oscclk";
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@12301000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x12301000 0x1000>,
+			      <0x12302000 0x2000>,
+			      <0x12304000 0x2000>,
+			      <0x12306000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_peri: clock-controller@10010000 {
+			compatible = "samsung,exynos7885-cmu-peri";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_PERI_BUS>,
+				 <&cmu_top CLK_DOUT_PERI_SPI0>,
+				 <&cmu_top CLK_DOUT_PERI_SPI1>,
+				 <&cmu_top CLK_DOUT_PERI_UART0>,
+				 <&cmu_top CLK_DOUT_PERI_UART1>,
+				 <&cmu_top CLK_DOUT_PERI_UART2>,
+				 <&cmu_top CLK_DOUT_PERI_USI0>,
+				 <&cmu_top CLK_DOUT_PERI_USI1>,
+				 <&cmu_top CLK_DOUT_PERI_USI2>;
+			clock-names = "oscclk",
+				      "dout_peri_bus",
+				      "dout_peri_spi0",
+				      "dout_peri_spi1",
+				      "dout_peri_uart0",
+				      "dout_peri_uart1",
+				      "dout_peri_uart2",
+				      "dout_peri_usi0",
+				      "dout_peri_usi1",
+				      "dout_peri_usi2";
+		};
+
+		cmu_core: clock-controller@12000000 {
+			compatible = "samsung,exynos7885-cmu-core";
+			reg = <0x12000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CORE_BUS>,
+				 <&cmu_top CLK_DOUT_CORE_CCI>,
+				 <&cmu_top CLK_DOUT_CORE_G3D>;
+			clock-names = "oscclk",
+				      "dout_core_bus",
+				      "dout_core_cci",
+				      "dout_core_g3d";
+		};
+
+		cmu_top: clock-controller@12060000 {
+			compatible = "samsung,exynos7885-cmu-top";
+			reg = <0x12060000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		cmu_fsys: clock-controller@13400000 {
+			compatible = "samsung,exynos7885-cmu-fsys";
+			reg = <0x13400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_FSYS_BUS>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_FSYS_MMC_SDIO>,
+				 <&cmu_top CLK_DOUT_FSYS_USB30DRD>;
+			clock-names = "oscclk",
+				      "dout_fsys_bus",
+				      "dout_fsys_mmc_card",
+				      "dout_fsys_mmc_embd",
+				      "dout_fsys_mmc_sdio",
+				      "dout_fsys_usb30drd";
+		};
+
+		pinctrl_alive: pinctrl@11cb0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x11cb0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_fsys: pinctrl@13430000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x13430000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_dispaud: pinctrl@148f0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x148f0000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@11c80000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x11c80000 0x10000>;
+		};
+
+		mmc_0: mmc@13500000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			reg = <0x13500000 0x2000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_fsys CLK_GOUT_MMC_EMBD_ACLK>,
+				 <&cmu_fsys CLK_GOUT_MMC_EMBD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <64>;
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13830000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13840000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13850000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13860000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_4: i2c@13870000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_5: i2c@13880000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_6: i2c@13890000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_7: i2c@11cd0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x11cd0000 0x100>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C7_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos7885-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
new file mode 100644
index 000000000..6ed389125
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * WinLink E850-96 board device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Device tree source file for WinLink's E850-96 board which is based on
+ * Samsung Exynos850 SoC.
+ */
+
+/dts-v1/;
+
+#include "exynos850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "WinLink E850-96 board";
+	compatible = "winlink,e850-96", "samsung,exynos850";
+
+	aliases {
+		mmc0 = &mmc_0;
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	/*
+	 * RAM: 4 GiB (eMCP):
+	 *   - 2 GiB at 0x80000000
+	 *   - 2 GiB at 0x880000000
+	 *
+	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
+	 */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3ab00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown_pins &key_volup_pins>;
+
+		volume-down-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		volume-up-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* HEART_BEAT_LED */
+		user_led1: led-1 {
+			label = "yellow:user1";
+			gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		/* eMMC_LED */
+		user_led2: led-2 {
+			label = "yellow:user2";
+			gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		/* SD_LED */
+		user_led3: led-3 {
+			label = "white:user3";
+			gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_SD;
+			linux,default-trigger = "mmc2";
+		};
+
+		/* WIFI_LED */
+		wlan_active_led: led-4 {
+			label = "yellow:wlan";
+			gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WLAN;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		/* BLUETOOTH_LED */
+		bt_active_led: led-5 {
+			label = "blue:bt";
+			gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_BLUETOOTH;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	/*
+	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+	 *
+	 * TODO: Remove this once RTC clock is implemented properly as part of
+	 *       PMIC driver.
+	 */
+	rtcclk: clock-rtcclk {
+		compatible = "fixed-clock";
+		clock-output-names = "rtcclk";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&cmu_hsi {
+	clocks = <&oscclk>, <&rtcclk>,
+		 <&cmu_top CLK_DOUT_HSI_BUS>,
+		 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+		 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+	clock-names = "oscclk", "rtcclk", "dout_hsi_bus",
+		      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	bus-width = <8>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins
+		     &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>;
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_voldown_pins: key-voldown-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup_pins: key-volup-pins {
+		samsung,pins = "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	status = "okay";
+};
+
+&watchdog_cl1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
new file mode 100644
index 000000000..424bc80bd
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (C) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* I2C5 (also called CAM_PMIC_I2C in TRM) */
+	i2c5_pins: i2c5-pins {
+		samsung,pins = "gpa3-5", "gpa3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* I2C6 (also called MOTOR_I2C in TRM) */
+	i2c6_pins: i2c6-pins {
+		samsung,pins = "gpa3-7", "gpa4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: UART_DEBUG_0 pins */
+	uart0_pins: uart0-pins {
+		samsung,pins = "gpq0-0", "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI: UART_DEBUG_1 pins */
+	uart1_pins: uart1-pins {
+		samsung,pins = "gpa3-7", "gpa4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	/* USI_CMGP0: HSI2C function */
+	hsi2c3_pins: hsi2c3-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
+	uart1_single_pins: uart1-single-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
+	uart1_dual_pins: uart1-dual-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP0: SPI function */
+	spi1_pins: spi1-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP1: HSI2C function */
+	hsi2c4_pins: hsi2c4-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
+	uart2_single_pins: uart2-single-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
+	uart2_dual_pins: uart2-dual-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP1: SPI function */
+	spi2_pins: spi2-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk_pins: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_pins: aud-i2s0-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_idle_pins: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_pins: aud-i2s1-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_idle_pins: aud-i2s1-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_pins: aud-fm-pins {
+		samsung,pins = "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_idle_pins: aud-fm-idle-pins {
+		samsung,pins = "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_hsi {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk_pins: sd2-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd_pins: sd2-cmd-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	 };
+
+	sd2_bus1_pins: sd2-bus1-pins {
+		samsung,pins = "gpf2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_bus4_pins: sd2-bus4-pins {
+		samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_pdn_pins: sd2-pdn-pins {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+			       "gpf2-4", "gpf2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_core {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk_pins: sd0-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd_pins: sd0-cmd-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs_pins: sd0-rdqs-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_nreset_pins: sd0-nreset-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1_pins: sd0-bus1-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4_pins: sd0-bus4-pins {
+		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8_pins: sd0-bus8-pins {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peri {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sensor_mclk0_in_pins: sensor-mclk0-in-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk0_out_pins: sensor-mclk0-out-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk0_fn_pins: sensor-mclk0-fn-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_in_pins: sensor-mclk1-in-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_out_pins: sensor-mclk1-out-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_fn_pins: sensor-mclk1-fn-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_in_pins: sensor-mclk2-in-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_out_pins: sensor-mclk2-out-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_fn_pins: sensor-mclk2-fn-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	/* USI: HSI2C0 */
+	hsi2c0_pins: hsi2c0-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: HSI2C1 */
+	hsi2c1_pins: hsi2c1-pins {
+		samsung,pins = "gpc1-2", "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: HSI2C2 */
+	hsi2c2_pins: hsi2c2-pins {
+		samsung,pins = "gpc1-4", "gpc1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: SPI */
+	spi0_pins: spi0-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_pins: i2c0-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	xclkout_pins: xclkout-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
new file mode 100644
index 000000000..aa077008b
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos850 SoC device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung Exynos850 SoC device nodes are listed in this file.
+ * Exynos850 based board files can include this file and provide
+ * values for board specific bindings.
+ */
+
+#include <dt-bindings/clock/exynos850.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	/* Also known under engineering name Exynos3830 */
+	compatible = "samsung,exynos850";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_aud;
+		pinctrl3 = &pinctrl_hsi;
+		pinctrl4 = &pinctrl_core;
+		pinctrl5 = &pinctrl_peri;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+				     <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* Main system clock (XTCXO); external, must be 26 MHz */
+	oscclk: clock-oscclk {
+		compatible = "fixed-clock";
+		clock-output-names = "oscclk";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts =
+		     <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos850-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		gic: interrupt-controller@12a01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			reg = <0x12a01000 0x1000>,
+			      <0x12a02000 0x2000>,
+			      <0x12a04000 0x2000>,
+			      <0x12a06000 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynos850-pmu", "syscon";
+			reg = <0x11860000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos850-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10060000 {
+			compatible = "samsung,exynos850-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		cmu_peri: clock-controller@10030000 {
+			compatible = "samsung,exynos850-cmu-peri";
+			reg = <0x10030000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+				 <&cmu_top CLK_DOUT_PERI_UART>,
+				 <&cmu_top CLK_DOUT_PERI_IP>;
+			clock-names = "oscclk", "dout_peri_bus",
+				      "dout_peri_uart", "dout_peri_ip";
+		};
+
+		cmu_g3d: clock-controller@11400000 {
+			compatible = "samsung,exynos850-cmu-g3d";
+			reg = <0x11400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>;
+			clock-names = "oscclk", "dout_g3d_switch";
+		};
+
+		cmu_apm: clock-controller@11800000 {
+			compatible = "samsung,exynos850-cmu-apm";
+			reg = <0x11800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>;
+			clock-names = "oscclk", "dout_clkcmu_apm_bus";
+		};
+
+		cmu_cmgp: clock-controller@11c00000 {
+			compatible = "samsung,exynos850-cmu-cmgp";
+			reg = <0x11c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>;
+			clock-names = "oscclk", "gout_clkcmu_cmgp_bus";
+		};
+
+		cmu_core: clock-controller@12000000 {
+			compatible = "samsung,exynos850-cmu-core";
+			reg = <0x12000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>,
+				 <&cmu_top CLK_DOUT_CORE_CCI>,
+				 <&cmu_top CLK_DOUT_CORE_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_CORE_SSS>;
+			clock-names = "oscclk", "dout_core_bus",
+				      "dout_core_cci", "dout_core_mmc_embd",
+				      "dout_core_sss";
+		};
+
+		cmu_top: clock-controller@120e0000 {
+			compatible = "samsung,exynos850-cmu-top";
+			reg = <0x120e0000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		cmu_mfcmscl: clock-controller@12c00000 {
+			compatible = "samsung,exynos850-cmu-mfcmscl";
+			reg = <0x12c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_MFC>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_M2M>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_MCSC>,
+				 <&cmu_top CLK_DOUT_MFCMSCL_JPEG>;
+			clock-names = "oscclk", "dout_mfcmscl_mfc",
+				      "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc",
+				      "dout_mfcmscl_jpeg";
+		};
+
+		cmu_dpu: clock-controller@13000000 {
+			compatible = "samsung,exynos850-cmu-dpu";
+			reg = <0x13000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>;
+			clock-names = "oscclk", "dout_dpu";
+		};
+
+		cmu_hsi: clock-controller@13400000 {
+			compatible = "samsung,exynos850-cmu-hsi";
+			reg = <0x13400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_HSI_BUS>,
+				 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+			clock-names = "oscclk", "dout_hsi_bus",
+				      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+		};
+
+		cmu_is: clock-controller@14500000 {
+			compatible = "samsung,exynos850-cmu-is";
+			reg = <0x14500000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_IS_BUS>,
+				 <&cmu_top CLK_DOUT_IS_ITP>,
+				 <&cmu_top CLK_DOUT_IS_VRA>,
+				 <&cmu_top CLK_DOUT_IS_GDC>;
+			clock-names = "oscclk", "dout_is_bus", "dout_is_itp",
+				      "dout_is_vra", "dout_is_gdc";
+		};
+
+		cmu_aud: clock-controller@14a00000 {
+			compatible = "samsung,exynos850-cmu-aud";
+			reg = <0x14a00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>;
+			clock-names = "oscclk", "dout_aud";
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x11850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos850-wakeup-eint";
+			};
+		};
+
+		pinctrl_cmgp: pinctrl@11c30000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x11c30000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos850-wakeup-eint";
+			};
+		};
+
+		pinctrl_core: pinctrl@12070000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x12070000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi: pinctrl@13430000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x13430000 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peri: pinctrl@139b0000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@14a60000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x14a60000 0x1000>;
+		};
+
+		rtc: rtc@11a30000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x11a30000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12100000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			reg = <0x12100000 0x2000>;
+			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>,
+				 <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13830000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13840000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13850000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13860000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_4: i2c@13870000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
+		i2c_5: i2c@13880000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		/* I2C_6 (also called MOTOR_I2C in TRM) */
+		i2c_6: i2c@13890000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		sysmmu_mfcmscl: sysmmu@12c50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12c50000 0x9000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_dpu: sysmmu@130c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x130c0000 0x9000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_is0: sysmmu@14550000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14550000 0x9000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_is1: sysmmu@14570000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14570000 0x9000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_aud: sysmmu@14850000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14850000 0x9000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu";
+			clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>;
+			#iommu-cells = <0>;
+		};
+
+		sysreg_peri: syscon@10020000 {
+			compatible = "samsung,exynos850-peri-sysreg",
+				     "samsung,exynos850-sysreg", "syscon";
+			reg = <0x10020000 0x10000>;
+			clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
+		};
+
+		sysreg_cmgp: syscon@11c20000 {
+			compatible = "samsung,exynos850-cmgp-sysreg",
+				     "samsung,exynos850-sysreg", "syscon";
+			reg = <0x11c20000 0x10000>;
+			clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
+		};
+
+		usi_uart: usi@138200c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138200c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@13820000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x13820000 0xc0>;
+				interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+					 <&cmu_peri CLK_GOUT_UART_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_0: usi@138a00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138a00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1020>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_0: i2c@138a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138a0000 0xc0>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c0_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C0_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_1: usi@138b00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138b00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1030>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_1: i2c@138b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138b0000 0xc0>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c1_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C1_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_2: usi@138c00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138c00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1040>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_2: i2c@138c0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138c0000 0xc0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c2_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_spi_0: usi@139400c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x139400c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1050>;
+			samsung,mode = <USI_V2_SPI>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+		};
+
+		usi_cmgp0: usi@11d000c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			samsung,sysreg = <&sysreg_cmgp 0x2000>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+				 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_3: i2c@11d00000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c3_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_1: serial@11d00000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x11d00000 0xc0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_single_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@11d200c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			samsung,sysreg = <&sysreg_cmgp 0x2010>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+				 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_4: i2c@11d20000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c4_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d20000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x11d20000 0xc0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_single_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "exynos850-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
new file mode 100644
index 000000000..e413a51c2
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
@@ -0,0 +1,1189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAutov9 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's ExynosAutov9 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dp0_hpd: dp0-hpd-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	dp1_hpd: dp1-hpd-pins {
+		samsung,pins = "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	speedy0_bus: speedy0-bus-pins {
+		samsung,pins = "gpq0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	speedy1_bus: speedy1-bus-pins {
+		samsung,pins = "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_bus: aud-i2s0-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_idle: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_bus: aud-i2s1-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_idle: aud-i2s1-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_bus: aud-i2s2-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s2_idle: aud-i2s2-idle-pins {
+		samsung,pins = "gpb1-4", "gpb1-5", "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_bus: aud-i2s3-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s3_idle: aud-i2s3-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_bus: aud-i2s4-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s4_idle: aud-i2s4-idle-pins {
+		samsung,pins = "gpb2-4", "gpb2-5", "gpb2-6", "gpb2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_bus: aud-i2s5-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s5_idle: aaud-i2s5-idle-pins {
+		samsung,pins = "gpb3-0", "gpb3-1", "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s6_bus: aud-i2s6-pins {
+		samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s6_idle: aaud-i2s6-idle-pins {
+		samsung,pins = "gpb3-4", "gpb3-5", "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcie_clkreq0: pcie-clkreq0-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst0_out: pcie-perst0-out-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst0_in: pcie-perst0-in-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq1: pcie-clkreq1-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst1_out: pcie-perst1-out-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst1_in: pcie-perst1-in-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq2: pcie-clkreq2-pins {
+		samsung,pins = "gpf0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst2_out: pcie-perst2-out-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst2_in: pcie-perst2-in-pins {
+		samsung,pins = "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq3: pcie-clkreq3-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst3_out: pcie-perst3-out-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst3_in: pcie-perst3-in-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq4: pcie-clkreq4-pins {
+		samsung,pins = "gpf1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst4_out: pcie-perst4-out-pins {
+		samsung,pins = "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst4_in: pcie-perst4-in-pins {
+		samsung,pins = "gpf1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_clkreq5: pcie-clkreq5-pins {
+		samsung,pins = "gpf1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	pcie_perst5_out: pcie-perst5-out-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	pcie_perst5_in: pcie-perst5-in-pins {
+		samsung,pins = "gpf1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpf8: gpf8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf8-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf8-3", "gpf8-4", "gpf8-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <2>;	/* 2x drive strength */
+	};
+};
+
+&pinctrl_fsys2 {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf6: gpf6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_rst_n_1: ufs-rst-n-1-pins {
+		samsung,pins = "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	ufs_refclk_out_1: ufs-refclk-out-1-pins {
+		samsung,pins = "gpf2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+	};
+
+	eth0_mdc_mdio: eth0-mdc-mdio-pins {
+		samsung,pins = "gpf4-5", "gpf4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth0_rgmii: eth0-rgmii-pins {
+		samsung,pins = "gpf3-1", "gpf3-2", "gpf3-3", "gpf3-4",
+			       "gpf3-5", "gpf3-6", "gpf3-7", "gpf4-0",
+			       "gpf4-1", "gpf4-2", "gpf4-3", "gpf4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth0_pps_out: eth0-pps-out-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	eth1_mdc_mdio: eth1-mdc-mdio-pins {
+		samsung,pins = "gpf6-5", "gpf6-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth1_rgmii: eth1-rgmii-pins {
+		samsung,pins = "gpf5-1", "gpf5-2", "gpf5-3", "gpf5-4",
+			       "gpf5-5", "gpf5-6", "gpf5-7", "gpf6-0",
+			       "gpf6-1", "gpf6-2", "gpf6-3", "gpf6-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+	};
+
+	eth1_pps_out: eth1-pps-out-pins {
+		samsung,pins = "gpf5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric0 {
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm_tout0: pwm-tout0-pins {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout1: pwm-tout1-pins {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout2: pwm-tout2-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	pwm_tout3: pwm-tout3-pins {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI00  */
+	hsi2c0_bus: hsi2c0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI00_I2C */
+	hsi2c1_bus: hsi2c1-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01 */
+	hsi2c2_bus: hsi2c2-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01_I2C */
+	hsi2c3_bus: hsi2c3-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02 */
+	hsi2c4_bus: hsi2c4-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02_I2C */
+	hsi2c5_bus: hsi2c5-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03 */
+	hsi2c6_bus: hsi2c6-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03_I2C */
+	hsi2c7_bus: hsi2c7-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04 */
+	hsi2c8_bus: hsi2c8-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04_I2C */
+	hsi2c9_bus: hsi2c9-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05 */
+	hsi2c10_bus: hsi2c10-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05_I2C */
+	hsi2c11_bus: hsi2c11-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* SPI USI_PERIC0_USI00_SPI */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi0_cs_func: spi0-cs-func-pins {
+		samsung,pins = "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI01_SPI */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp0-6", "gpp0-5", "gpp0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi1_cs_func: spi1-cs-func-pins {
+		samsung,pins = "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI02_SPI */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpp1-2", "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi2_cs_func: spi2-cs-func-pins {
+		samsung,pins = "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI03_SPI */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpp1-6", "gpp1-5", "gpp1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi3_cs_func: spi3-cs-func-pins {
+		samsung,pins = "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI04_SPI */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp2-2", "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi4_cs_func: spi4-cs-func-pins {
+		samsung,pins = "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* PERIC0 USI05_SPI */
+	spi5_bus: spi5-bus-pins {
+		samsung,pins = "gpp2-6", "gpp2-5", "gpp2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs: spi5-cs-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	spi5_cs_func: spi5-cs-func-pins {
+		samsung,pins = "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI00_UART */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart0_bus_dual: uart0-bus-dual-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI01_UART */
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart1_bus_dual: uart1-bus-dual-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI02_UART */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart2_bus_dual: uart2-bus-dual-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI03_UART */
+	uart3_bus: uart3-bus-pins {
+		samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpp1-4", "gpp1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI04_UART */
+	uart4_bus: uart4-bus-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpp2-0", "gpp2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC0_USI05_UART */
+	uart5_bus: uart5-bus-pins {
+		samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp2-4", "gpp2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_peric1 {
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* PERIC1 USI06 */
+	hsi2c12_bus: hsi2c12-bus-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI06_I2C */
+	hsi2c13_bus: hsi2c13-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07 */
+	hsi2c14_bus: hsi2c14-bus-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07_I2C */
+	hsi2c15_bus: hsi2c15-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08 */
+	hsi2c16_bus: hsi2c16-bus-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08_I2C */
+	hsi2c17_bus: hsi2c17-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09 */
+	hsi2c18_bus: hsi2c18-bus-pins {
+		samsung,pins = "gpp4-4", "gpp4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09_I2C */
+	hsi2c19_bus: hsi2c19-bus-pins {
+		samsung,pins = "gpp4-6", "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10 */
+	hsi2c20_bus: hsi2c20-bus-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10_I2C */
+	hsi2c21_bus: hsi2c21-bus-pins {
+		samsung,pins = "gpp5-2", "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11 */
+	hsi2c22_bus: hsi2c22-bus-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11_I2C */
+	hsi2c23_bus: hsi2c23-bus-pins {
+		samsung,pins = "gpp5-6", "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI06_SPI */
+	spi6_bus: spi6-bus-pins {
+		samsung,pins = "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs: spi6-cs-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi6_cs_func: spi6-cs-func-pins {
+		samsung,pins = "gpp3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI07_SPI */
+	spi7_bus: spi7-bus-pins {
+		samsung,pins = "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs: spi7-cs-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi7_cs_func: spi7-cs-func-pins {
+		samsung,pins = "gpp3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI08_SPI */
+	spi8_bus: spi8-bus-pins {
+		samsung,pins = "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs: spi8-cs-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi8_cs_func: spi8-cs-func-pins {
+		samsung,pins = "gpp4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI09_SPI */
+	spi9_bus: spi9-bus-pins {
+		samsung,pins = "gpp4-6", "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs: spi9-cs-pins {
+		samsung,pins = "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi9_cs_func: spi9-cs-func-pins {
+		samsung,pins = "gpp4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI10_SPI */
+	spi10_bus: spi10-pins {
+		samsung,pins = "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs: spi10-cs-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi10_cs_func: spi10-cs-func-pins {
+		samsung,pins = "gpp5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* PERIC1 USI11_SPI */
+	spi11_bus: spi11-pins {
+		samsung,pins = "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs: spi11-cs-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi11_cs_func: spi11-cs-func-pins {
+		samsung,pins = "gpp5-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_PERIC1_USI06_UART */
+	uart6_bus: uart6-bus-pins {
+		samsung,pins = "gpp3-3", "gpp3-2", "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart6_bus_dual: uart6-bus-dual-pins {
+		samsung,pins = "gpp3-0", "gpp3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI07_UART */
+	uart7_bus: uart7-bus-pins {
+		samsung,pins = "gpp3-7", "gpp3-6", "gpp3-5", "gpp3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart7_bus_dual: uart7-bus-dual-pins {
+		samsung,pins = "gpp3-4", "gpp3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI08_UART */
+	uart8_bus: uart8-bus-pins {
+		samsung,pins = "gpp4-3", "gpp4-2", "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart8_bus_dual: uart8-bus-dual-pins {
+		samsung,pins = "gpp4-0", "gpp4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI09_UART */
+	uart9_bus: uart9-bus-pins {
+		samsung,pins = "gpp4-7", "gpp4-6", "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart9_bus_dual: uart9-bus-dual-pins {
+		samsung,pins = "gpp4-4", "gpp4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI10_UART */
+	uart10_bus: uart10-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-1", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart10_bus_dual: uart10-bus-dual-pins {
+		samsung,pins = "gpp5-0", "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_PERIC1_USI11_UART */
+	uart11_bus: uart11-bus-pins {
+		samsung,pins = "gpp5-7", "gpp5-6", "gpp5-5", "gpp5-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart11_bus_dual: uart11-bus-dual-pins {
+		samsung,pins = "gpp5-4", "gpp5-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
new file mode 100644
index 000000000..bc1815f6a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung ExynosAutov9 SADK board device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "exynosautov9.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung ExynosAuto v9 SADK board";
+	compatible = "samsung,exynosautov9-sadk", "samsung,exynosautov9";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x77000000>,
+		      <0x8 0x80000000 0x1 0x7ba00000>,
+		      <0xa 0x00000000 0x2 0x00000000>;
+	};
+
+	ufs_0_fixed_vcc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpq0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	ufs_1_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpg2 2 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_tout3>;
+	status = "okay";
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_bus_dual>;
+	status = "okay";
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&ufs_1_phy {
+	status = "okay";
+};
+
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_1 {
+	status = "okay";
+	vcc-supply = <&ufs_1_fixed_vcc_reg>;
+};
+
+&usi_0 {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&xtcxo {
+	clock-frequency = <26000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
new file mode 100644
index 000000000..b228cd7e3
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -0,0 +1,1577 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's ExynosAuto v9 SoC device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ *
+ */
+
+#include <dt-bindings/clock/samsung,exynosautov9.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,boot-mode.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	compatible = "samsung,exynosautov9";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_fsys0;
+		pinctrl3 = &pinctrl_fsys1;
+		pinctrl4 = &pinctrl_fsys2;
+		pinctrl5 = &pinctrl_peric0;
+		pinctrl6 = &pinctrl_peric1;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+				     <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10200>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x10300>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fixed-rate-clocks {
+		xtcxo: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "oscclk";
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		cmu_peris: clock-controller@10020000 {
+			compatible = "samsung,exynosautov9-cmu-peris";
+			reg = <0x10020000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIS_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peris_bus";
+		};
+
+		cmu_peric0: clock-controller@10200000 {
+			compatible = "samsung,exynosautov9-cmu-peric0";
+			reg = <0x10200000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_BUS>,
+				 <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peric0_bus",
+				      "dout_clkcmu_peric0_ip";
+		};
+
+		cmu_peric1: clock-controller@10800000 {
+			compatible = "samsung,exynosautov9-cmu-peric1";
+			reg = <0x10800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_BUS>,
+				 <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_peric1_bus",
+				      "dout_clkcmu_peric1_ip";
+		};
+
+		cmu_fsys1: clock-controller@17040000 {
+			compatible = "samsung,exynosautov9-cmu-fsys1";
+			reg = <0x17040000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS1_BUS>,
+				 <&cmu_top GOUT_CLKCMU_FSYS1_MMC_CARD>,
+				 <&cmu_top DOUT_CLKCMU_FSYS1_USBDRD>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys1_bus",
+				      "gout_clkcmu_fsys1_mmc_card",
+				      "dout_clkcmu_fsys1_usbdrd";
+		};
+
+		cmu_fsys0: clock-controller@17700000 {
+			compatible = "samsung,exynosautov9-cmu-fsys0";
+			reg = <0x17700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS0_BUS>,
+				 <&cmu_top DOUT_CLKCMU_FSYS0_PCIE>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys0_bus",
+				      "dout_clkcmu_fsys0_pcie";
+		};
+
+		cmu_fsys2: clock-controller@17c00000 {
+			compatible = "samsung,exynosautov9-cmu-fsys2";
+			reg = <0x17c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+				 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_fsys2_bus",
+				      "dout_fsys2_clkcmu_ufs_embd",
+				      "dout_fsys2_clkcmu_ethernet";
+		};
+
+		cmu_core: clock-controller@1b030000 {
+			compatible = "samsung,exynosautov9-cmu-core";
+			reg = <0x1b030000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_CORE_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_core_bus";
+		};
+
+		cmu_busmc: clock-controller@1b200000 {
+			compatible = "samsung,exynosautov9-cmu-busmc";
+			reg = <0x1b200000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>,
+				 <&cmu_top DOUT_CLKCMU_BUSMC_BUS>;
+			clock-names = "oscclk",
+				      "dout_clkcmu_busmc_bus";
+		};
+
+		cmu_top: clock-controller@1b240000 {
+			compatible = "samsung,exynosautov9-cmu-top";
+			reg = <0x1b240000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&xtcxo>;
+			clock-names = "oscclk";
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x2000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pdma0: dma-controller@1b2e0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x1b2e0000 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_busmc CLK_GOUT_BUSMC_PDMA0_PCLK>;
+			clock-names = "apb_pclk";
+			arm,pl330-broken-no-flushp;
+			#dma-cells = <1>;
+		};
+
+		pinctrl_alive: pinctrl@10450000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10450000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynosautov9-wakeup-eint";
+			};
+		};
+
+		pinctrl_aud: pinctrl@19c60000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x19c60000 0x1000>;
+		};
+
+		pinctrl_fsys0: pinctrl@17740000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17740000 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys1: pinctrl@17060000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17060000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys2: pinctrl@17c30000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x17c30000 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric0: pinctrl@10230000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10230000 0x1000>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynosautov9-pinctrl";
+			reg = <0x10830000 0x1000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@10460000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x10460000 0x10000>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				value = <0x2>;
+				mask = <0x2>;
+			};
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x810>; /* SYSIP_DAT0 */
+				mode-bootloader = <EXYNOSAUTOV9_BOOT_BOOTLOADER>;
+				mode-fastboot = <EXYNOSAUTOV9_BOOT_FASTBOOT>;
+				mode-recovery = <EXYNOSAUTOV9_BOOT_RECOVERY>;
+			};
+		};
+
+		syscon_fsys2: syscon@17c20000 {
+			compatible = "samsung,exynosautov9-fsys2-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x17c20000 0x1000>;
+		};
+
+		syscon_peric0: syscon@10220000 {
+			compatible = "samsung,exynosautov9-peric0-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x10220000 0x2000>;
+		};
+
+		syscon_peric1: syscon@10820000 {
+			compatible = "samsung,exynosautov9-peric1-sysreg",
+				     "samsung,exynosautov9-sysreg", "syscon";
+			reg = <0x10820000 0x2000>;
+		};
+
+		usi_0: usi@103000c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103000c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@10300000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10300000 0xc0>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_0: spi@10300000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10300000 0x30>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_bus &spi0_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 1>, <&pdma0 0>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_0: i2c@10300000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10300000 0xc0>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c0_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_0: usi@103100c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103100c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1004>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_1: i2c@10310000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10310000 0xc0>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c1_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_1>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_1: usi@103200c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103200c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_1: serial@10320000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10320000 0xc0>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_1: spi@10320000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10320000 0x30>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_bus &spi1_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 3>, <&pdma0 2>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_2: i2c@10320000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10320000 0xc0>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c2_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_2>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_1: usi@103300c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103300c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x100c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_3: i2c@10330000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10330000 0xc0>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c3_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_3>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_2: usi@103400c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103400c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_2: serial@10340000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10340000 0xc0>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_2: spi@10340000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10340000 0x30>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_bus &spi2_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 5>, <&pdma0 4>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_4: i2c@10340000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10340000 0xc0>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c4_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_4>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_2: usi@103500c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103500c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1014>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_5: i2c@10350000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10350000 0xc0>;
+				interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c5_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_5>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_3: usi@103600c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103600c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_3: serial@10360000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10360000 0xc0>;
+				interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart3_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_3: spi@10360000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10360000 0x30>;
+				interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi3_bus &spi3_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 7>, <&pdma0 6>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_6: i2c@10360000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10360000 0xc0>;
+				interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c6_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_6>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_3: usi@103700c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103700c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x101c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_7: i2c@10370000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10370000 0xc0>;
+				interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c7_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_7>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_4: usi@103800c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103800c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_4: serial@10380000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10380000 0xc0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart4_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_4: spi@10380000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10380000 0x30>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi4_bus &spi4_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 9>, <&pdma0 8>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_8: i2c@10380000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10380000 0xc0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c8_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_8>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_8>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_4: usi@103900c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103900c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_9: i2c@10390000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10390000 0xc0>;
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c9_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_9>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_9>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_5: usi@103a00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_5: serial@103a0000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x103a0000 0xc0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart5_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_5: spi@103a0000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x103a0000 0x30>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi5_bus &spi5_cs_func>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 11>, <&pdma0 10>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_10: i2c@103a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x103a0000 0xc0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c10_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_10>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_10>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_5: usi@103b00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x103b00c0 0x20>;
+			samsung,sysreg = <&syscon_peric0 0x102c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_11: i2c@103b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x103b0000 0xc0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c11_bus>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_11>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_11>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_6: usi@109000c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1000>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_6: serial@10900000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart6_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+
+			spi_6: spi@10900000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10900000 0x30>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi6_bus &spi6_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI06_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 13>, <&pdma0 12>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_12: i2c@10900000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c12_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_0>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_0>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_6: usi@109100c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1004>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_13: i2c@10910000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c13_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_1>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_1>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_7: usi@109200c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1008>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_7: serial@10920000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart7_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_7: spi@10920000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10920000 0x30>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi7_bus &spi7_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI07_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 15>, <&pdma0 14>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_14: i2c@10920000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c14_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_2>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_2>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_7: usi@109300c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x100c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_15: i2c@10930000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c15_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_3>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_3>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_8: usi@109400c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_8: serial@10940000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart8_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_8: spi@10940000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10940000 0x30>;
+				interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi8_bus &spi8_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI08_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 17>, <&pdma0 16>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_16: i2c@10940000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c16_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_4>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_4>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_8: usi@109500c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1014>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_17: i2c@10950000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c17_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_5>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_5>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_9: usi@109600c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1018>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_9: serial@10960000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart9_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_9: spi@10960000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10960000 0x30>;
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi9_bus &spi9_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 19>, <&pdma0 18>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_18: i2c@10960000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c18_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_6>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_6>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_9: usi@109700c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x101c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_19: i2c@10970000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c19_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_7>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_7>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_10: usi@109800c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109800c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1020>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_10: serial@10980000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart10_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_10: spi@10980000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x10980000 0x30>;
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi10_bus &spi10_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				dmas = <&pdma0 21>, <&pdma0 20>;
+				dma-names = "tx", "rx";
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_20: i2c@10980000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10980000 0xc0>;
+				interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c20_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_8>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_8>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_10: usi@109900c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109900c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1024>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_21: i2c@10990000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x10990000 0xc0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c21_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_9>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_9>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_11: usi@109a00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109a00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x1028>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_11: serial@109a0000 {
+				compatible = "samsung,exynosautov9-uart",
+					     "samsung,exynos850-uart";
+				reg = <0x109a0000 0xc0>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart11_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>;
+				clock-names = "uart", "clk_uart_baud0";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+
+			spi_11: spi@109a0000 {
+				compatible = "samsung,exynosautov9-spi";
+				reg = <0x109a0000 0x30>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi11_bus &spi11_cs_func>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>;
+				clock-names = "spi", "spi_busclk0", "spi_ioclk";
+				samsung,spi-src-clk = <0>;
+				num-cs = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			hsi2c_22: i2c@109a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x109a0000 0xc0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c22_bus>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_10>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_10>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_11: usi@109b00c0 {
+			compatible = "samsung,exynosautov9-usi",
+				     "samsung,exynos850-usi";
+			reg = <0x109b00c0 0x20>;
+			samsung,sysreg = <&syscon_peric1 0x102c>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>,
+				 <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_23: i2c@109b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x109b0000 0xc0>;
+				interrupts = <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c23_bus>;
+				clocks = <&cmu_peric1 CLK_GOUT_PERIC1_IPCLK_11>,
+					 <&cmu_peric1 CLK_GOUT_PERIC1_PCLK_11>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ufs_0_phy: phy@17e04000 {
+			compatible = "samsung,exynosautov9-ufs-phy";
+			reg = <0x17e04000 0xc00>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		ufs_0: ufs@17e00000 {
+			compatible = "samsung,exynosautov9-ufs";
+
+			reg = <0x17e00000 0x100>,
+			      <0x17e01100 0x410>,
+			      <0x17e80000 0x8000>,
+			      <0x17dc0000 0x2200>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>,
+				 <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&syscon_fsys2 0x710>;
+			status = "disabled";
+		};
+
+		ufs_1_phy: phy@17f04000 {
+			compatible = "samsung,exynosautov9-ufs-phy";
+			reg = <0x17f04000 0xc00>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller 0x72c>;
+			#phy-cells = <0>;
+			clocks = <&xtcxo>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
+		ufs_1: ufs@17f00000 {
+			compatible = "samsung,exynosautov9-ufs";
+
+			reg = <0x17f00000 0x100>,
+			      <0x17f01100 0x410>,
+			      <0x17f80000 0x8000>,
+			      <0x17de0000 0x2200>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_ACLK>,
+				 <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n_1 &ufs_refclk_out_1>;
+			phys = <&ufs_1_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&syscon_fsys2 0x714>;
+			status = "disabled";
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynosautov9-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER0>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl1: watchdog@10060000 {
+			compatible = "samsung,exynosautov9-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_WDT_CLUSTER1>, <&xtcxo>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+		};
+
+		pwm: pwm@103f0000 {
+			compatible = "samsung,exynosautov9-pwm",
+				     "samsung,exynos4210-pwm";
+			reg = <0x103f0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&xtcxo>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynosautov9-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
new file mode 100644
index 000000000..89aee6c92
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2081a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-bluebox3-rev-a.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
+
+fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
+fsl-ls1028a-qds-65bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-65bb.dtbo
+fsl-ls1028a-qds-7777-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-7777.dtbo
+fsl-ls1028a-qds-85bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-85bb.dtbo
+fsl-ls1028a-qds-899b-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-899b.dtbo
+fsl-ls1028a-qds-9999-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-9999.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-osm-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
+
+imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-eval.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.1.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-apalis-v1.1-ixora-v1.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-aster.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+
+imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
+imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
+imx8mm-venice-gw72xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
+imx8mm-venice-gw72xx-0x-rs422-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
+imx8mm-venice-gw72xx-0x-rs485-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
+imx8mm-venice-gw73xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-venice-gw73xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rpidsi.dtbo
+imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
+imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
+imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+imx8mp-venice-gw74xx-rpidsi-dtbs	:= imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rpidsi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
+
+dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
+dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
+dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
new file mode 100644
index 000000000..2517528f6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A Freedom Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A Freedom Board";
+	compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	serial@0 {
+		compatible = "nxp,sc16is740";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		clocks = <&sc16is7xx_clk>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		sc16is7xx_clk: clock-sc16is7xx {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	codec: sgtl5000@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
new file mode 100644
index 000000000..e8562585d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A FRWY Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Pramod Kumar <pramod.kumar_1@nxp.com>
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A FRWY Board";
+	compatible = "fsl,ls1012a-frwy", "fsl,ls1012a";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	w25q16dw0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
new file mode 100644
index 000000000..242f4b0cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Oxalis
+ *
+ * Copyright (c) 2019 Manivannan Sadhasivam
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "Oxalis";
+	compatible = "ebs-systart,oxalis", "fsl,ls1012a";
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	codec: audio-codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+		clocks = <&sys_mclk>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
new file mode 100644
index 000000000..bbdf98905
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A QDS Board";
+	compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+
+	aliases {
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			codec: sgtl5000@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_3p3v>;
+				VDDIO-supply = <&reg_3p3v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
new file mode 100644
index 000000000..e662677a6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS1012A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ */
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "LS1012A RDB Board";
+	compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+	aliases {
+		serial0 = &duart0;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	accelerometer@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+		interrupt-parent = <&gpio26>;
+		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "INT1";
+	};
+
+	gyroscope@20 {
+		compatible = "nxp,fxas21002c";
+		reg = <0x20>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pcal9555a";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@25 {
+		compatible = "nxp,pcal9555a";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio26: gpio@26 {
+		compatible = "nxp,pcal9555a";
+		reg = <0x26>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	current-sensor@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <2000>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+		reg = <0>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
new file mode 100644
index 000000000..a86302252
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -0,0 +1,577 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1012A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1012a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
+		rtic-a = &rtic_a;
+		rtic-b = &rtic_b;
+		rtic-c = &rtic_c;
+		rtic-d = &rtic_d;
+		sec-mon = &sec_mon;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_PH20>;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "sysclk";
+	};
+
+	coreclk: coreclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "coreclk";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1012a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			broken-cd;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			rtic@60000 {
+				compatible = "fsl,sec-v5.4-rtic",
+					     "fsl,sec-v5.0-rtic",
+					     "fsl,sec-v4.0-rtic";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x60000 0x100>, <0x60e00 0x18>;
+				ranges = <0x0 0x60100 0x500>;
+
+				rtic_a: rtic-a@0 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x00 0x20>, <0x100 0x100>;
+				};
+
+				rtic_b: rtic-b@20 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x20 0x20>, <0x200 0x100>;
+				};
+
+				rtic_c: rtic-c@40 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x40 0x20>, <0x300 0x100>;
+				};
+
+				rtic_d: rtic-d@60 {
+					compatible = "fsl,sec-v5.4-rtic-memory",
+						     "fsl,sec-v5.0-rtic-memory",
+						     "fsl,sec-v4.0-rtic-memory";
+					reg = <0x60 0x20>, <0x400 0x100>;
+				};
+			};
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		sec_mon: sec_mon@1e90000 {
+			compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon",
+				     "fsl,sec-v4.0-mon";
+			reg = <0x0 0x1e90000 0x0 0x10000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1012a-dcfg",
+				     "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1012a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk &coreclk>;
+			clock-names = "sysclk", "coreclk";
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>;
+			fsl,tmu-calibration = <0x00000000 0x00000025
+					       0x00000001 0x0000002c
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004c
+					       0x00000007 0x00000053
+					       0x00000008 0x00000059
+					       0x00000009 0x0000005f
+					       0x0000000a 0x00000066
+					       0x0000000b 0x0000006c
+
+					       0x00010000 0x00000026
+					       0x00010001 0x0000002d
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004d
+					       0x00010006 0x00000055
+					       0x00010007 0x0000005d
+					       0x00010008 0x00000065
+					       0x00010009 0x0000006d
+
+					       0x00020000 0x00000026
+					       0x00020001 0x00000030
+					       0x00020002 0x0000003a
+					       0x00020003 0x00000044
+					       0x00020004 0x0000004e
+					       0x00020005 0x00000059
+					       0x00020006 0x00000063
+
+					       0x00030000 0x00000014
+					       0x00030001 0x00000021
+					       0x00030002 0x0000002e
+					       0x00030003 0x0000003a
+					       0x00030004 0x00000047
+					       0x00030005 0x00000053
+					       0x00030006 0x00000060>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,ls1012a-wdt",
+				     "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b50000 0x0 0x10000>;
+			interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b60000 0x0 0x10000>;
+			interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		usb0: usb@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x0 0x20140520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb1: usb@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <0 139 0x4>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		msi: msi-controller1@1572000 {
+			compatible = "fsl,ls1012a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1012a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>, /* controller interrupt */
+				     <0 117 0x4>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1012a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
new file mode 100644
index 000000000..af9194eca
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree File for the Kontron KBox A-230-LS.
+ *
+ * This consists of a Kontron SMARC-sAL28 (Dual PHY) and a special
+ * carrier (s1914).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28-var4.dts"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Kontron KBox A-230-LS";
+	compatible = "kontron,kbox-a-230-ls", "kontron,sl28-var4",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	leds {
+		compatible = "gpio-leds";
+
+		alarm-led {
+			function = LED_FUNCTION_ALARM;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&sl28cpld_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		power-led {
+			linux,default-trigger = "default-on";
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&sl28cpld_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&enetc_mdio_pf3 {
+	/* BCM54140 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@7 {
+		reg = <7>;
+	};
+
+	qsgmii_phy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+
+	qsgmii_phy2: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	qsgmii_phy3: ethernet-phy@10 {
+		reg = <10>;
+	};
+};
+
+&enetc_port2 {
+	nvmem-cells = <&base_mac_address 2>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&enetc_port3 {
+	nvmem-cells = <&base_mac_address 3>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 4>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 5>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 6>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 7>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	status = "okay";
+};
+
+&mscc_felix_port5 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
new file mode 100644
index 000000000..1f34c7553
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 1 which has one ethernet port. It is
+ * different than the base variant, which also has one port, but here the
+ * port is connected via RGMII. This port is not TSN aware.
+ * None of the  four SerDes lanes are used by the module, instead they are
+ * all led out to the carrier for customer use.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (4 Lanes)";
+	compatible = "kontron,sl28-var1", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	/* Delete unused phy node */
+	/delete-node/ ethernet-phy@5;
+
+	phy0: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+		qca,clk-out-frequency = <125000000>;
+		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+		qca,keep-pll-enabled;
+		vddio-supply = <&vddio>;
+
+		vddio: vddio-regulator {
+			regulator-name = "VDDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vddh: vddh-regulator {
+			regulator-name = "VDDH";
+		};
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/* Delete the phy-handle to the old phy0 label */
+	/delete-property/ phy-handle;
+};
+
+&enetc_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
new file mode 100644
index 000000000..aac41192c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 2 which has two ethernet ports. These
+ * ports are connected to the internal switch.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (TSN-on-module)";
+	compatible = "kontron,sl28-var2", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	status = "disabled";
+	/*
+	 * In the base device tree the PHY at address 5 was assigned for
+	 * this port. On this module this PHY is connected to a switch
+	 * port instead. Therefore, delete the phy-handle property here.
+	 */
+	/delete-property/ phy-handle;
+};
+
+&enetc_port2 {
+	nvmem-cells = <&base_mac_address 2>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&enetc_port3 {
+	nvmem-cells = <&base_mac_address 3>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	status = "okay";
+};
+
+&mscc_felix_port5 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
new file mode 100644
index 000000000..ed4e69e87
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board on a SMARC Eval 2.0
+ * carrier (ADS2).
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include "fsl-ls1028a-kontron-sl28.dts"
+
+/ {
+	model = "Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier";
+	compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
+		     "kontron,sl28", "fsl,ls1028a";
+
+	pwm-fan {
+		compatible = "pwm-fan";
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		pwms = <&sl28cpld_pwm0 0 4000000>;
+		cooling-levels = <1 128 192 255>;
+	};
+
+	sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-audio-card";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out Jack",
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"Line Out Jack", "LINEOUTR",
+			"Line Out Jack", "LINEOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack",
+			"Microphone Jack", "MICBIAS",
+			"IN2L", "Microphone Jack",
+			"IN2R", "Microphone Jack";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&dailink0_master>;
+			frame-master = <&dailink0_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai6>;
+			};
+
+			dailink0_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&dailink1_master>;
+			frame-master = <&dailink1_master>;
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&sai5>;
+			};
+
+			dailink1_master: codec {
+				sound-dai = <&wm8904>;
+			};
+		};
+	};
+};
+
+&dspi2 {
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+&i2c3 {
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+		assigned-clocks = <&mclk>;
+		assigned-clock-rates = <1250000>;
+	};
+};
+
+&sai5 {
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&soc {
+	mclk: clock-mclk@f130080 {
+		compatible = "fsl,vf610-sai-clock";
+		reg = <0x0 0xf130080 0x0 0x80>;
+		clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+				    QORIQ_CLK_PLL_DIV(2)>;
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
new file mode 100644
index 000000000..a4421db37
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * This is for the network variant 4 which has two ethernet ports. It
+ * extends the base and provides one more port connected via RGMII.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a-kontron-sl28.dts"
+#include <dt-bindings/net/qca-ar803x.h>
+
+/ {
+	model = "Kontron SMARC-sAL28 (Dual PHY)";
+	compatible = "kontron,sl28-var4", "kontron,sl28", "fsl,ls1028a";
+};
+
+&enetc_mdio_pf3 {
+	phy1: ethernet-phy@4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+		qca,clk-out-frequency = <125000000>;
+		qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+		qca,keep-pll-enabled;
+		vddio-supply = <&vddio>;
+
+		vddio: vddio-regulator {
+			regulator-name = "VDDIO";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vddh: vddh-regulator {
+			regulator-name = "VDDH";
+		};
+	};
+};
+
+&enetc_port1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 000000000..8b65af4a7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2021 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &lpuart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc;
+		rtc0 = &rtc;
+		rtc1 = &ftm_alarm0;
+	};
+
+	buttons0 {
+		compatible = "gpio-keys";
+
+		power-button {
+			interrupts-extended = <&sl28cpld_intc
+					       4 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_POWER>;
+			label = "Power";
+		};
+
+		sleep-button {
+			interrupts-extended = <&sl28cpld_intc
+					       5 IRQ_TYPE_EDGE_BOTH>;
+			linux,code = <KEY_SLEEP>;
+			label = "Sleep";
+		};
+	};
+
+	buttons1 {
+		compatible = "gpio-keys-polled";
+		poll-interval = <200>;
+
+		lid-switch {
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			gpios = <&sl28cpld_gpio3 4 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+		};
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_mdio_pf3 {
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x000000 0x010000>;
+				label = "rcw";
+				read-only;
+			};
+
+			partition@10000 {
+				reg = <0x010000 0x1d0000>;
+				label = "failsafe bootloader";
+				read-only;
+			};
+
+			partition@200000 {
+				reg = <0x200000 0x010000>;
+				label = "configuration store";
+			};
+
+			partition@210000 {
+				reg = <0x210000 0x1d0000>;
+				label = "bootloader";
+			};
+
+			partition@3e0000 {
+				reg = <0x3e0000 0x020000>;
+				label = "bootloader environment";
+			};
+		};
+
+		otp-1 {
+			compatible = "user-otp";
+
+			nvmem-layout {
+				compatible = "kontron,sl28-vpd";
+
+				serial_number: serial-number {
+				};
+
+				base_mac_address: base-mac-address {
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
+	};
+};
+
+&ftm_alarm0 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "TDO", "TCK",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "TMS", "TDI",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	sl28cpld@4a {
+		compatible = "kontron,sl28cpld";
+		reg = <0x4a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		watchdog@4 {
+			compatible = "kontron,sl28cpld-wdt";
+			reg = <0x4>;
+			kontron,assert-wdt-timeout-pin;
+		};
+
+		hwmon@b {
+			compatible = "kontron,sl28cpld-fan";
+			reg = <0xb>;
+		};
+
+		sl28cpld_pwm0: pwm@c {
+			compatible = "kontron,sl28cpld-pwm";
+			reg = <0xc>;
+			#pwm-cells = <2>;
+		};
+
+		sl28cpld_pwm1: pwm@e {
+			compatible = "kontron,sl28cpld-pwm";
+			reg = <0xe>;
+			#pwm-cells = <2>;
+		};
+
+		sl28cpld_gpio0: gpio@10 {
+			compatible = "kontron,sl28cpld-gpio";
+			reg = <0x10>;
+			interrupts-extended = <&gpio2 6
+					       IRQ_TYPE_EDGE_FALLING>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N",
+				"GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N",
+				"GPIO4_HDA_RST_N", "GPIO5_PWM_OUT",
+				"GPIO6_TACHIN", "GPIO7";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sl28cpld_gpio1: gpio@15 {
+			compatible = "kontron,sl28cpld-gpio";
+			reg = <0x15>;
+			interrupts-extended = <&gpio2 6
+					       IRQ_TYPE_EDGE_FALLING>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"GPIO8", "GPIO9", "GPIO10", "GPIO11",
+				"", "", "", "";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sl28cpld_gpio2: gpio@1a {
+			compatible = "kontron,sl28cpld-gpo";
+			reg = <0x1a>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"LCD0 voltage enable",
+				"LCD0 backlight enable",
+				"eMMC reset", "LVDS bridge reset",
+				"LVDS bridge power-down",
+				"SDIO power enable",
+				"", "";
+		};
+
+		sl28cpld_gpio3: gpio@1b {
+			compatible = "kontron,sl28cpld-gpi";
+			reg = <0x1b>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-line-names =
+				"Power button", "Force recovery", "Sleep",
+				"Battery low", "Lid state", "Charging",
+				"Charger present", "";
+		};
+
+		sl28cpld_intc: interrupt-controller@1c {
+			compatible = "kontron,sl28cpld-intc";
+			reg = <0x1c>;
+			interrupts-extended = <&gpio2 6
+					       IRQ_TYPE_EDGE_FALLING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	dsa-tag-protocol = "ocelot-8021q";
+};
+
+&mscc_felix_port5 {
+	dsa-tag-protocol = "ocelot-8021q";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
new file mode 100644
index 000000000..f826392c2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on AQR412 */
+	slot2_qxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot2_qxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot2_qxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot2_qxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii0>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii1>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii2>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii3>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
new file mode 100644
index 000000000..b949cac03
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "2500base-x";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
+	};
+
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
+
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
+
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
new file mode 100644
index 000000000..1dff68d74
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dtso
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on AQR412 */
+	slot1_sxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+
+	slot1_sxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii0>;
+		phy-mode = "2500base-x";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii1>;
+		phy-mode = "2500base-x";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii2>;
+		phy-mode = "2500base-x";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii3>;
+		phy-mode = "2500base-x";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
new file mode 100644
index 000000000..19424d349
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@1c {
+		/* 1st port on VSC8234 */
+		reg = <0x1c>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
+	};
+
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
+
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
+
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
new file mode 100644
index 000000000..fb85847f7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VSC8234 */
+	slot1_sgmii0: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	slot1_sgmii1: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	slot1_sgmii2: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	slot1_sgmii3: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&mscc_felix_ports {
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii1>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii2>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
new file mode 100644
index 000000000..63e46fad2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dtso
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VSC8234 */
+	slot1_sgmii0: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	slot1_sgmii1: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	slot1_sgmii2: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	slot1_sgmii3: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii0>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii1>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii2>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii3>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
new file mode 100644
index 000000000..0bb2f28a0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1028A QDS Board.
+ *
+ * Copyright 2018 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "LS1028A QDS Board";
+	compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		mmc0 = &esdhc;
+		mmc1 = &esdhc1;
+		rtc1 = &ftm_alarm1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x00000000>;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+
+	mdio-mux {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&enetc_mdio_pf3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* on-board RGMII PHY */
+		mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			qds_phy1: ethernet-phy@5 {
+				/* Atheros 8035 */
+				reg = <5>;
+			};
+		};
+
+		mdio_slot1: mdio@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		mdio_slot2: mdio@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		mdio_slot3: mdio@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		mdio_slot4: mdio@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&qds_phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
+&ftm_alarm1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			current-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			current-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			sgtl5000: audio-codec@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_1p8v>;
+				clocks = <&sys_mclk>;
+			};
+		};
+	};
+
+	fpga@66 {
+		compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc_port2>;
+	status = "okay";
+};
+
+&sai1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
new file mode 100644
index 000000000..ecd2c1ea1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1028A RDB Board.
+ *
+ * Copyright 2018-2021 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "LS1028A RDB Board";
+	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
+
+	aliases {
+		crypto = &crypto;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		mmc0 = &esdhc;
+		mmc1 = &esdhc1;
+		rtc1 = &ftm_alarm1;
+		spi0 = &fspi;
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port2;
+		ethernet2 = &mscc_felix_port0;
+		ethernet3 = &mscc_felix_port1;
+		ethernet4 = &mscc_felix_port2;
+		ethernet5 = &mscc_felix_port3;
+		ethernet6 = &mscc_felix_port4;
+		ethernet7 = &mscc_felix_port5;
+		ethernet8 = &enetc_port3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0000000>;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai4>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			frame-master;
+			bitclock-master;
+			system-clock-frequency = <25000000>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&enetc_mdio_pf3 {
+	sgmii_phy0: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+
+	/* VSC8514 QSGMII quad PHY */
+	qsgmii_phy0: ethernet-phy@10 {
+		reg = <0x10>;
+	};
+
+	qsgmii_phy1: ethernet-phy@11 {
+		reg = <0x11>;
+	};
+
+	qsgmii_phy2: ethernet-phy@12 {
+		reg = <0x12>;
+	};
+
+	qsgmii_phy3: ethernet-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&enetc_port0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
+
+&enetc_port2 {
+	status = "okay";
+};
+
+&enetc_port3 {
+	status = "okay";
+};
+
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
+&ftm_alarm1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9847";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			sgtl5000: audio-codec@a {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_1p8v>;
+				clocks = <&sys_mclk>;
+				sclk-strength = <3>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			current-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "swp0";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy0>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "swp1";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy1>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port2 {
+	label = "swp2";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy2>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port3 {
+	label = "swp3";
+	managed = "in-band-status";
+	phy-handle = <&qsgmii_phy3>;
+	phy-mode = "qsgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	status = "okay";
+};
+
+&mscc_felix_port5 {
+	status = "okay";
+};
+
+&optee {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sai4 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
new file mode 100644
index 000000000..eefe3577d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -0,0 +1,1340 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1028A family SoC.
+ *
+ * Copyright 2018-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1028a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PW20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PW20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PW20: cpu-pw20 {
+			  compatible = "arm,idle-state";
+			  idle-state-name = "PW20";
+			  arm,psci-suspend-param = <0x0>;
+			  entry-latency-us = <2000>;
+			  exit-latency-us = <2000>;
+			  min-residency-us = <6000>;
+		};
+	};
+
+	rtc_clk: rtc-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "rtc_clk";
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	osc_27m: clock-osc-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "phy_27m";
+	};
+
+	firmware {
+		optee: optee  {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+			status = "disabled";
+		};
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&rst>;
+		offset = <0>;
+		mask = <0x02>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
+		};
+	};
+
+	thermal-zones {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
+		dcfg: syscon@1e00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			ranges = <0x0 0x0 0x1e00000 0x10000>;
+			little-endian;
+
+			fspi_clk: clock-controller@900 {
+				compatible = "fsl,ls1028a-flexspi-clk";
+				reg = <0x900 0x4>;
+				#clock-cells = <0>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
+				clock-output-names = "fspi_clk";
+			};
+		};
+
+		rst: syscon@1e60000 {
+			compatible = "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+			little-endian;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ls1028a_uid: unique-id@1c {
+				reg = <0x1c 0x8>;
+			};
+		};
+
+		scfg: syscon@1fc0000 {
+			compatible = "fsl,ls1028a-scfg", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clock-controller@1300000 {
+			compatible = "fsl,ls1028a-clockgen";
+			reg = <0x0 0x1300000 0x0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@2040000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2040000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@2050000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2050000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@2060000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@2070000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&fspi_clk>, <&fspi_clk>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 0 62>, <&edma0 0 60>;
+			dma-names = "tx", "rx";
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 0 58>, <&edma0 0 56>;
+			dma-names = "tx", "rx";
+			spi-num-chipselects = <4>;
+			little-endian;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 0 54>, <&edma0 0 2>;
+			dma-names = "tx", "rx";
+			spi-num-chipselects = <3>;
+			little-endian;
+			status = "disabled";
+		};
+
+		esdhc: mmc@2140000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800>;
+			sdhci,auto-cmd12;
+			non-removable;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		can0: can@2180000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg", "per";
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+
+		lpuart0: serial@2260000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			status = "disabled";
+		};
+
+		lpuart1: serial@2270000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			status = "disabled";
+		};
+
+		lpuart2: serial@2280000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2280000 0x0 0x1000>;
+			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			status = "disabled";
+		};
+
+		lpuart3: serial@2290000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x2290000 0x0 0x1000>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			status = "disabled";
+		};
+
+		lpuart4: serial@22a0000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x22a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			status = "disabled";
+		};
+
+		lpuart5: serial@22b0000 {
+			compatible = "fsl,ls1028a-lpuart";
+			reg = <0x0 0x22b0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			dma-names = "rx","tx";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			status = "disabled";
+		};
+
+		edma0: dma-controller@22c0000 {
+			#dma-cells = <2>;
+			compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
+			reg = <0x0 0x22c0000 0x0 0x10000>,
+			      <0x0 0x22d0000 0x0 0x10000>,
+			      <0x0 0x22e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			little-endian;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			little-endian;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			little-endian;
+		};
+
+		usb0: usb@3100000 {
+			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1028a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep1: pcie-ep@3400000 {
+			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000
+			       0x80 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1028a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep2: pcie-ep@3500000 {
+			compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000
+			       0x88 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <8>;
+			#iommu-cells = <1>;
+			dma-coherent;
+			stream-match-mask = <0x7c00>;
+			/* global secure fault */
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			/* combined secure interrupt */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			/* global non-secure fault */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			/* combined non-secure interrupt */
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			/* performance counter interrupts 0-7 */
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+			/* per context interrupt, 64 interrupts */
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+		};
+
+		cluster1_core0_watchdog: watchdog@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core1_watchdog: watchdog@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		malidp0: display@f080000 {
+			compatible = "arm,mali-dp500";
+			reg = <0x0 0xf080000 0x0 0x10000>;
+			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "DE", "SE";
+			clocks = <&dpclk>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>;
+			clock-names = "pxlclk", "mclk", "aclk", "pclk";
+			arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+			arm,malidp-arqos-value = <0xd000d000>;
+
+			port {
+				dpi0_out: endpoint {
+
+				};
+			};
+		};
+
+		gpu: gpu@f0c0000 {
+			compatible = "vivante,gc";
+			reg = <0x0 0xf0c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>,
+				 <&clockgen QORIQ_CLK_HWACCEL 2>;
+			clock-names = "core", "shader", "bus";
+			#cooling-cells = <2>;
+		};
+
+		sai1: audio-controller@f100000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 4>,
+			       <&edma0 1 3>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai2: audio-controller@f110000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 6>,
+			       <&edma0 1 5>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai3: audio-controller@f120000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 8>,
+			       <&edma0 1 7>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai4: audio-controller@f130000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf130000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 10>,
+			       <&edma0 1 9>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai5: audio-controller@f140000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 12>,
+			       <&edma0 1 11>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai6: audio-controller@f150000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 14>,
+			       <&edma0 1 13>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		dpclk: clock-controller@f1f0000 {
+			compatible = "fsl,ls1028a-plldig";
+			reg = <0x0 0xf1f0000 0x0 0x10000>;
+			#clock-cells = <0>;
+			clocks = <&osc_27m>;
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+			fsl,tmu-calibration = <0x00000000 0x00000024
+					       0x00000001 0x0000002b
+					       0x00000002 0x00000031
+					       0x00000003 0x00000038
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000045
+					       0x00000006 0x0000004c
+					       0x00000007 0x00000053
+					       0x00000008 0x00000059
+					       0x00000009 0x00000060
+					       0x0000000a 0x00000066
+					       0x0000000b 0x0000006d
+
+					       0x00010000 0x0000001c
+					       0x00010001 0x00000024
+					       0x00010002 0x0000002c
+					       0x00010003 0x00000035
+					       0x00010004 0x0000003d
+					       0x00010005 0x00000045
+					       0x00010006 0x0000004d
+					       0x00010007 0x00000055
+					       0x00010008 0x0000005e
+					       0x00010009 0x00000066
+					       0x0001000a 0x0000006e
+
+					       0x00020000 0x00000018
+					       0x00020001 0x00000022
+					       0x00020002 0x0000002d
+					       0x00020003 0x00000038
+					       0x00020004 0x00000043
+					       0x00020005 0x0000004d
+					       0x00020006 0x00000058
+					       0x00020007 0x00000063
+					       0x00020008 0x0000006e
+
+					       0x00030000 0x00000010
+					       0x00030001 0x0000001c
+					       0x00030002 0x00000029
+					       0x00030003 0x00000036
+					       0x00030004 0x00000042
+					       0x00030005 0x0000004f
+					       0x00030006 0x0000005b
+					       0x00030007 0x00000068>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
+			compatible = "pci-host-ecam-generic";
+			reg = <0x01 0xf0000000 0x0 0x100000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			msi-parent = <&its>;
+			device_type = "pci";
+			bus-range = <0x0 0x0>;
+			dma-coherent;
+			msi-map = <0 &its 0x17 0xe>;
+			iommu-map = <0 &smmu 0x17 0xe>;
+				  /* PF0-6 BAR0 - non-prefetchable memory */
+			ranges = <0x82000000 0x1 0xf8000000  0x1 0xf8000000  0x0 0x160000
+				  /* PF0-6 BAR2 - prefetchable memory */
+				  0xc2000000 0x1 0xf8160000  0x1 0xf8160000  0x0 0x070000
+				  /* PF0: VF0-1 BAR0 - non-prefetchable memory */
+				  0x82000000 0x1 0xf81d0000  0x1 0xf81d0000  0x0 0x020000
+				  /* PF0: VF0-1 BAR2 - prefetchable memory */
+				  0xc2000000 0x1 0xf81f0000  0x1 0xf81f0000  0x0 0x020000
+				  /* PF1: VF0-1 BAR0 - non-prefetchable memory */
+				  0x82000000 0x1 0xf8210000  0x1 0xf8210000  0x0 0x020000
+				  /* PF1: VF0-1 BAR2 - prefetchable memory */
+				  0xc2000000 0x1 0xf8230000  0x1 0xf8230000  0x0 0x020000
+				  /* BAR4 (PF5) - non-prefetchable memory */
+				  0x82000000 0x1 0xfc000000  0x1 0xfc000000  0x0 0x400000>;
+
+			enetc_port0: ethernet@0,0 {
+				compatible = "fsl,enetc";
+				reg = <0x000000 0 0 0 0>;
+				status = "disabled";
+			};
+
+			enetc_port1: ethernet@0,1 {
+				compatible = "fsl,enetc";
+				reg = <0x000100 0 0 0 0>;
+				status = "disabled";
+			};
+
+			enetc_port2: ethernet@0,2 {
+				compatible = "fsl,enetc";
+				reg = <0x000200 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			enetc_mdio_pf3: mdio@0,3 {
+				compatible = "fsl,enetc-mdio";
+				reg = <0x000300 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			ethernet@0,4 {
+				compatible = "fsl,enetc-ptp";
+				reg = <0x000400 0 0 0 0>;
+				clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
+				little-endian;
+				fsl,extts-fifo;
+			};
+
+			mscc_felix: ethernet-switch@0,5 {
+				reg = <0x000500 0 0 0 0>;
+				/* IEP INT_B */
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+
+				mscc_felix_ports: ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					/* External ports */
+					mscc_felix_port0: port@0 {
+						reg = <0>;
+						status = "disabled";
+					};
+
+					mscc_felix_port1: port@1 {
+						reg = <1>;
+						status = "disabled";
+					};
+
+					mscc_felix_port2: port@2 {
+						reg = <2>;
+						status = "disabled";
+					};
+
+					mscc_felix_port3: port@3 {
+						reg = <3>;
+						status = "disabled";
+					};
+
+					/* Internal ports */
+					mscc_felix_port4: port@4 {
+						reg = <4>;
+						phy-mode = "internal";
+						ethernet = <&enetc_port2>;
+						status = "disabled";
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+							pause;
+						};
+					};
+
+					mscc_felix_port5: port@5 {
+						reg = <5>;
+						phy-mode = "internal";
+						ethernet = <&enetc_port3>;
+						status = "disabled";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+							pause;
+						};
+					};
+				};
+			};
+
+			enetc_port3: ethernet@0,6 {
+				compatible = "fsl,enetc";
+				reg = <0x000600 0 0 0 0>;
+				phy-mode = "internal";
+				status = "disabled";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			rcec@1f,0 {
+				reg = <0x00f800 0 0 0 0>;
+				/* IEP INT_A */
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		/* Integrated Endpoint Register Block */
+		ierb@1f0800000 {
+			compatible = "fsl,ls1028a-enetc-ierb";
+			reg = <0x01 0xf0800000 0x0 0x10000>;
+		};
+
+		pwm0: pwm@2800000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@2810000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@2820000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2820000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@2830000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2830000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@2840000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2840000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@2850000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2850000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@2860000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2860000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@2870000 {
+			compatible = "fsl,vf610-ftm-pwm";
+			#pwm-cells = <3>;
+			reg = <0x0 0x2870000 0x0 0x10000>;
+			clock-names = "ftm_sys", "ftm_ext",
+				      "ftm_fix", "ftm_cnt_clk_en";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&rtc_clk>, <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ftm_alarm1: timer@2810000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2810000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
new file mode 100644
index 000000000..5c4d7eef8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1043
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+
+};
+
+&fman0 {
+	fsl,erratum-a050385;
+
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+		pcs-handle-names = "qsgmii";
+	};
+
+	enet1: ethernet@e2000 {
+		pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	mdio@e1000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
new file mode 100644
index 000000000..dda27ed7a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018-2021 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+		sgmii-riser-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-riser-s2-p1 = &sgmii_phy_s2_p1;
+		sgmii-riser-s3-p1 = &sgmii_phy_s3_p1;
+		sgmii-riser-s4-p1 = &sgmii_phy_s4_p1;
+		qsgmii-s1-p1 = &qsgmii_phy_s1_p1;
+		qsgmii-s1-p2 = &qsgmii_phy_s1_p2;
+		qsgmii-s1-p3 = &qsgmii_phy_s1_p3;
+		qsgmii-s1-p4 = &qsgmii_phy_s1_p4;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+		emi1-slot1 = &ls1043mdio_s1;
+		emi1-slot2 = &ls1043mdio_s2;
+		emi1-slot3 = &ls1043mdio_s3;
+		emi1-slot4 = &ls1043mdio_s4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <0x2 0x0 0x0000100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy_s2_p2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy_s2_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy_s2_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		fixed-link = <1 1 10000 0 0>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	mdio-mux-emi1@54 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1043mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1043mdio1: mdio@20 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1043mdio_s1: mdio@40 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s1_p1: ethernet-phy@4 {
+				reg = <0x4>;
+			};
+
+			qsgmii_phy_s1_p2: ethernet-phy@5 {
+				reg = <0x5>;
+			};
+
+			qsgmii_phy_s1_p3: ethernet-phy@6 {
+				reg = <0x6>;
+			};
+
+			qsgmii_phy_s1_p4: ethernet-phy@7 {
+				reg = <0x7>;
+			};
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1043mdio_s2: mdio@60 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+
+			sgmii_phy_s2_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 3 */
+		ls1043mdio_s3: mdio@80 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s3_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1043mdio_s4: mdio@a0 {
+			reg = <0xa0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
new file mode 100644
index 000000000..26f8540cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+/dts-v1/;
+#include "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+	compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	adt7461a@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c512";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			big-endian;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <100>;
+	};
+
+	slic@2 {
+		compatible = "maxim,ds26522";
+		reg = <2>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+
+	slic@3 {
+		compatible = "maxim,ds26522";
+		reg = <3>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr105_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		qsgmii_phy1: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+
+		qsgmii_phy2: ethernet-phy@5 {
+			reg = <0x5>;
+		};
+
+		qsgmii_phy3: ethernet-phy@6 {
+			reg = <0x6>;
+		};
+
+		qsgmii_phy4: ethernet-phy@7 {
+			reg = <0x7>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr105_phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 132 4>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&uqe {
+	ucc_hdlc: ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "clk8";
+		tx-clock-name = "clk9";
+		fsl,rx-sync-clock = "rsync_pin";
+		fsl,tx-sync-clock = "tsync_pin";
+		fsl,tx-timeslot-mask = <0xfffffffe>;
+		fsl,rx-timeslot-mask = <0xfffffffe>;
+		fsl,tdm-framer-type = "e1";
+		fsl,tdm-id = <0>;
+		fsl,siram-entry-id = <0>;
+		fsl,tdm-interface;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
new file mode 100644
index 000000000..f8acbefc8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -0,0 +1,1024 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018, 2020 NXP
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+		      /* DRAM space 1, size: 2GiB DRAM */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>, /* Physical Secure PPI */
+			     <1 14 0xf08>, /* Physical Non-Secure PPI */
+			     <1 11 0xf08>, /* Virtual PPI */
+			     <1 10 0xf08>; /* Hypervisor PPI */
+		fsl,erratum-a008585;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 0x4>,
+			     <0 107 0x4>,
+			     <0 95 0x4>,
+			     <0 97 0x4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1043a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1043a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <0 75 0x4>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <0 71 0x4>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <0 72 0x4>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <0 73 0x4>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <0 74 0x4>;
+			};
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1043a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
+			big-endian;
+		};
+
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x4000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 99 0x4>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <0 144 0x4>;
+			big-endian;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration = <0x00000000 0x00000023
+					       0x00000001 0x0000002a
+					       0x00000002 0x00000031
+					       0x00000003 0x00000037
+					       0x00000004 0x0000003e
+					       0x00000005 0x00000044
+					       0x00000006 0x0000004b
+					       0x00000007 0x00000051
+					       0x00000008 0x00000058
+					       0x00000009 0x0000005e
+					       0x0000000a 0x00000065
+					       0x0000000b 0x0000006b
+
+					       0x00010000 0x00000023
+					       0x00010001 0x0000002b
+					       0x00010002 0x00000033
+					       0x00010003 0x0000003b
+					       0x00010004 0x00000043
+					       0x00010005 0x0000004b
+					       0x00010006 0x00000054
+					       0x00010007 0x0000005c
+					       0x00010008 0x00000064
+					       0x00010009 0x0000006c
+
+					       0x00020000 0x00000021
+					       0x00020001 0x0000002c
+					       0x00020002 0x00000036
+					       0x00020003 0x00000040
+					       0x00020004 0x0000004b
+					       0x00020005 0x00000055
+					       0x00020006 0x0000005f
+
+					       0x00030000 0x00000013
+					       0x00030001 0x0000001d
+					       0x00030002 0x00000028
+					       0x00030003 0x00000032
+					       0x00030004 0x0000003d
+					       0x00030005 0x00000047
+					       0x00030006 0x00000052
+					       0x00030007 0x0000005c>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&bman_fbpr>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@2330000 {
+			compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uqe: uqe@2400000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0x0 0x0 0x2400000 0x40000>;
+			reg = <0x0 0x2400000 0x0 0x480>;
+			brg-frequency = <100000000>;
+			bus-frequency = <200000000>;
+			fsl,qe-num-riscs = <1>;
+			fsl,qe-num-snums = <28>;
+
+			qeic: qeic@80 {
+				compatible = "fsl,qe-ic";
+				reg = <0x80 0x80>;
+				#address-cells = <0>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			si1: si@700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ls1043-qe-si",
+						"fsl,t1040-qe-si";
+				reg = <0x700 0x80>;
+			};
+
+			siram1: siram@1000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,ls1043-qe-siram",
+						"fsl,t1040-qe-siram";
+				reg = <0x1000 0x800>;
+			};
+
+			ucc@2000 {
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+			};
+
+			ucc@2200 {
+				cell-index = <3>;
+				reg = <0x2200 0x200>;
+				interrupts = <34>;
+				interrupt-parent = <&qeic>;
+			};
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0x0 0x10000 0x6000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+					"fsl,cpm-muram-data";
+					reg = <0x0 0x6000>;
+				};
+			};
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 0x4>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "wdog";
+			big-endian;
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 0x4>,
+				     <0 103 0x4>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+		};
+
+		aux_bus: aux_bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				usb3-lpm-capable;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			sata: sata@3200000 {
+				compatible = "fsl,ls1043a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(1)>;
+				dma-coherent;
+			};
+		};
+
+		msi1: msi-controller1@1571000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1571000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 116 0x4>;
+		};
+
+		msi2: msi-controller2@1572000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 0x4>;
+		};
+
+		msi3: msi-controller3@1573000 {
+			compatible = "fsl,ls1043a-msi";
+			reg = <0x0 0x1573000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 160 0x4>;
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1043a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+					<0000 0 0 2 &gic 0 111 0x4>,
+					<0000 0 0 3 &gic 0 112 0x4>,
+					<0000 0 0 4 &gic 0 113 0x4>;
+			fsl,pcie-scfg = <&scfg 0>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1043a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
+					<0000 0 0 2 &gic 0 121 0x4>,
+					<0000 0 0 3 &gic 0 122 0x4>,
+					<0000 0 0 4 &gic 0 123 0x4>;
+			fsl,pcie-scfg = <&scfg 1>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls1043a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 162 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme", "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+					<0000 0 0 2 &gic 0 155 0x4>,
+					<0000 0 0 3 &gic 0 156 0x4>,
+					<0000 0 0 4 &gic 0 157 0x4>;
+			fsl,pcie-scfg = <&scfg 2>;
+			big-endian;
+			status = "disabled";
+		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1021a-qdma", "fsl,ls1043a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1043a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
new file mode 100644
index 000000000..4e3345093
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree nodes for ls1046
+ *
+ * Copyright 2015-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&soc {
+
+/* include used FMan blocks */
+#include "qoriq-fman3-0.dtsi"
+#include "qoriq-fman3-0-1g-0.dtsi"
+#include "qoriq-fman3-0-1g-1.dtsi"
+#include "qoriq-fman3-0-1g-2.dtsi"
+#include "qoriq-fman3-0-1g-3.dtsi"
+#include "qoriq-fman3-0-1g-4.dtsi"
+#include "qoriq-fman3-0-1g-5.dtsi"
+#include "qoriq-fman3-0-10g-0.dtsi"
+#include "qoriq-fman3-0-10g-1.dtsi"
+};
+
+&fman0 {
+	/* these aliases provide the FMan ports mapping */
+	enet0: ethernet@e0000 {
+		pcsphy-handle = <&qsgmiib_pcs3>;
+		pcs-handle-names = "qsgmii";
+	};
+
+	enet1: ethernet@e2000 {
+	};
+
+	enet2: ethernet@e4000 {
+	};
+
+	enet3: ethernet@e6000 {
+	};
+
+	enet4: ethernet@e8000 {
+		pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet5: ethernet@ea000 {
+		pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+		pcs-handle-names = "sgmii", "qsgmii";
+	};
+
+	enet6: ethernet@f0000 {
+	};
+
+	enet7: ethernet@f2000 {
+		pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+		pcs-handle-names = "sgmii", "qsgmii", "xfi";
+	};
+
+	mdio@eb000 {
+		qsgmiib_pcs1: ethernet-pcs@1 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x1>;
+		};
+
+		qsgmiib_pcs2: ethernet-pcs@2 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x2>;
+		};
+
+		qsgmiib_pcs3: ethernet-pcs@3 {
+			compatible = "fsl,lynx-pcs";
+			reg = <0x3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
new file mode 100644
index 000000000..6d22efbd6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2019 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A FRWY Board";
+	compatible = "fsl,ls1046a-frwy", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT8642SEV-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&duart2 {
+	status = "okay";
+};
+
+&duart3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+
+			eeprom@52 {
+				compatible = "onnn,cat24c04", "atmel,24c04";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flash */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+};
+
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f2000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	mdio@fd000 {
+		qsgmii_phy1: ethernet-phy@1c {
+			reg = <0x1c>;
+		};
+
+		qsgmii_phy2: ethernet-phy@1d {
+			reg = <0x1d>;
+		};
+
+		qsgmii_phy3: ethernet-phy@1e {
+			reg = <0x1e>;
+		};
+
+		qsgmii_phy4: ethernet-phy@1f {
+			reg = <0x1f>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
new file mode 100644
index 000000000..3b0ed9305
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018-2019 NXP
+ *
+ * Shaohui Xie <Shaohui.Xie@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A QDS Board";
+	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
+
+	aliases {
+		emi1-slot1 = &ls1046mdio_s1;
+		emi1-slot2 = &ls1046mdio_s2;
+		emi1-slot4 = &ls1046mdio_s4;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		qsgmii-s2-p1 = &qsgmii_phy_s2_p1;
+		qsgmii-s2-p2 = &qsgmii_phy_s2_p2;
+		qsgmii-s2-p3 = &qsgmii_phy_s2_p3;
+		qsgmii-s2-p4 = &qsgmii_phy_s2_p4;
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+		sgmii-s1-p1 = &sgmii_phy_s1_p1;
+		sgmii-s1-p2 = &sgmii_phy_s1_p2;
+		sgmii-s1-p3 = &sgmii_phy_s1_p3;
+		sgmii-s1-p4 = &sgmii_phy_s1_p4;
+		sgmii-s4-p1 = &sgmii_phy_s4_p1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst25wf040b", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "en25s64", "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		big-endian;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <0x2 0x0 0x0000100>;
+		ranges = <0 2 0 0x100>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	qflash0: flash@0 {
+		compatible = "spansion,m25p80";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy_s2_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e2000 {
+		phy-handle = <&sgmii_phy_s4_p1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy_s1_p3>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy_s1_p4>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* DTSEC9/10GEC1 */
+		phy-handle = <&sgmii_phy_s1_p1>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* DTSEC10/10GEC2 */
+		phy-handle = <&sgmii_phy_s1_p2>;
+		phy-connection-type = "xgmii";
+	};
+};
+
+&fpga {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;    /* BRDCFG4 */
+		mux-mask = <0xe0>; /* EMI1 */
+
+		/* On-board RGMII1 PHY */
+		ls1046mdio0: mdio@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+				reg = <0x1>;
+			};
+		};
+
+		/* On-board RGMII2 PHY */
+		ls1046mdio1: mdio@1 {
+			reg = <0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+				reg = <0x2>;
+			};
+		};
+
+		/* Slot 1 */
+		ls1046mdio_s1: mdio@2 {
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s1_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			sgmii_phy_s1_p2: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			sgmii_phy_s1_p3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			sgmii_phy_s1_p4: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		/* Slot 2 */
+		ls1046mdio_s2: mdio@3 {
+			reg = <0x60>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			qsgmii_phy_s2_p1: ethernet-phy@8 {
+				reg = <0x8>;
+			};
+
+			qsgmii_phy_s2_p2: ethernet-phy@9 {
+				reg = <0x9>;
+			};
+
+			qsgmii_phy_s2_p3: ethernet-phy@a {
+				reg = <0xa>;
+			};
+
+			qsgmii_phy_s2_p4: ethernet-phy@b {
+				reg = <0xb>;
+			};
+		};
+
+		/* Slot 4 */
+		ls1046mdio_s4: mdio@5 {
+			reg = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sgmii_phy_s4_p1: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
new file mode 100644
index 000000000..07f6cc6e3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A RDB Board";
+	compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
+
+&i2c0 {
+	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	temp-sensor@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "onnn,cat24c05", "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		/* IRQ_RTC_B -> IRQ05, active low */
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flashe and CPLD on board */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	cpld: board-control@2,0 {
+		compatible = "fsl,ls1046ardb-cpld";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&usb1 {
+	dr_mode = "otg";
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e4000 {
+		phy-handle = <&rgmii_phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e6000 {
+		phy-handle = <&rgmii_phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&sgmii_phy1>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&sgmii_phy2>;
+		phy-connection-type = "sgmii";
+	};
+
+	ethernet@f0000 { /* 10GEC1 */
+		phy-handle = <&aqr106_phy>;
+		phy-connection-type = "xgmii";
+	};
+
+	ethernet@f2000 { /* 10GEC2 */
+		phy-connection-type = "10gbase-r";
+		managed = "in-band-status";
+	};
+
+	mdio@fc000 {
+		rgmii_phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		rgmii_phy2: ethernet-phy@2 {
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: ethernet-phy@3 {
+			reg = <0x3>;
+		};
+
+		sgmii_phy2: ethernet-phy@4 {
+			reg = <0x4>;
+		};
+	};
+
+	mdio@fd000 {
+		aqr106_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			interrupts = <0 131 4>;
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
new file mode 100644
index 000000000..50f68ca5a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -0,0 +1,989 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1046A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018, 2020 NXP
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "fsl,ls1046a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		fman0 = &fman0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		ethernet5 = &enet5;
+		ethernet6 = &enet6;
+		ethernet7 = &enet7;
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	idle-states {
+		/*
+		 * PSCI node is not added default, U-boot will add missing
+		 * parts if it determines to use PSCI.
+		 */
+		entry-method = "psci";
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* Real size will be filled by bootloader */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	thermal-zones {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+		      <0x0 0x1420000 0 0x20000>, /* GICC */
+		      <0x0 0x1440000 0 0x20000>, /* GICH */
+		      <0x0 0x1460000 0 0x20000>; /* GICV */
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
+					 IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
+
+		ddr: memory-controller@1080000 {
+			compatible = "fsl,qoriq-memory-controller";
+			reg = <0x0 0x1080000 0x0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+
+		ifc: memory-controller@1530000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		qspi: spi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1046a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+				     "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x1700000 0x100000>;
+			reg = <0x00 0x1700000 0x0 0x100000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.4-job-ring",
+					     "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x0 0x1880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&qman_fqd &qman_pfdr>;
+
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x0 0x1890000 0x0 0x10000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&bman_fbpr>;
+
+		};
+
+		qportals: qman-portals@500000000 {
+			ranges = <0x0 0x5 0x00000000 0x8000000>;
+		};
+
+		bportals: bman-portals@508000000 {
+			ranges = <0x0 0x5 0x08000000 0x8000000>;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1021a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1046a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x1000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1046a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f00000 0x0 0x10000>;
+			interrupts = <0 33 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000023
+				0x00000001 0x00000029
+				0x00000002 0x0000002f
+				0x00000003 0x00000036
+				0x00000004 0x0000003c
+				0x00000005 0x00000042
+				0x00000006 0x00000049
+				0x00000007 0x0000004f
+				0x00000008 0x00000055
+				0x00000009 0x0000005c
+				0x0000000a 0x00000062
+				0x0000000b 0x00000068
+				/* Calibration data group 2 */
+				0x00010000 0x00000022
+				0x00010001 0x0000002a
+				0x00010002 0x00000032
+				0x00010003 0x0000003a
+				0x00010004 0x00000042
+				0x00010005 0x0000004a
+				0x00010006 0x00000052
+				0x00010007 0x0000005a
+				0x00010008 0x00000062
+				0x00010009 0x0000006a
+				/* Calibration data group 3 */
+				0x00020000 0x00000021
+				0x00020001 0x0000002b
+				0x00020002 0x00000035
+				0x00020003 0x0000003e
+				0x00020004 0x00000048
+				0x00020005 0x00000052
+				0x00020006 0x0000005c
+				/* Calibration data group 4 */
+				0x00030000 0x00000011
+				0x00030001 0x0000001a
+				0x00030002 0x00000024
+				0x00030003 0x0000002e
+				0x00030004 0x00000038
+				0x00030005 0x00000042
+				0x00030006 0x0000004c
+				0x00030007 0x00000056>;
+			big-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dmas = <&edma0 1 38>,
+			       <&edma0 1 39>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			big-endian;
+		};
+
+		edma0: dma-controller@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+		};
+
+		aux_bus: aux_bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@2f00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x2f00000 0x0 0x10000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb1: usb@3000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3000000 0x0 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			usb2: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				usb3-lpm-capable;
+			};
+
+			sata: sata@3200000 {
+				compatible = "fsl,ls1046a-ahci";
+				reg = <0x0 0x3200000 0x0 0x10000>,
+					<0x0 0x20140520 0x0 0x4>;
+				reg-names = "ahci", "sata-ecc";
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+						    QORIQ_CLK_PLL_DIV(2)>;
+			};
+		};
+
+		msi1: msi-controller@1580000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi2: msi-controller@1590000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x1590000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		msi3: msi-controller@15a0000 {
+			compatible = "fsl,ls1046a-msi";
+			msi-controller;
+			reg = <0x0 0x15a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1046a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>, <&msi2>, <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie_ep1: pcie_ep@3400000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000>,
+			      <0x40 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1046a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi2>, <&msi3>, <&msi1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie_ep2: pcie_ep@3500000 {
+			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000>,
+			      <0x48 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls1046a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+			interrupt-names = "aer", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-viewport = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi3>, <&msi1>, <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+			status = "disabled";
+		};
+
+		pcie_ep3: pcie_ep@3600000 {
+			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000>,
+			      <0x50 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pme";
+			num-ib-windows = <6>;
+			num-ob-windows = <8>;
+			big-endian;
+			status = "disabled";
+		};
+
+		qdma: dma-controller@8380000 {
+			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "qdma-error", "qdma-queue0",
+				"qdma-queue1", "qdma-queue2", "qdma-queue3";
+			dma-channels = <8>;
+			block-number = <1>;
+			block-offset = <0x10000>;
+			fsl,dma-queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1046a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "shared-dma-pool";
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+			no-map;
+		};
+
+		qman_fqd: qman-fqd {
+			compatible = "shared-dma-pool";
+			size = <0 0x800000>;
+			alignment = <0 0x800000>;
+			no-map;
+		};
+
+		qman_pfdr: qman-pfdr {
+			compatible = "shared-dma-pool";
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+#include "qoriq-qman-portals.dtsi"
+#include "qoriq-bman-portals.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
new file mode 100644
index 000000000..aa52ff73f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A QDS Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A QDS Board";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x80000000 0x08000000
+		  2 0 0x5 0x30000000 0x00010000
+		  3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x3 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
new file mode 100644
index 000000000..ee8e93262
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A RDB Board.
+ *
+ * Copyright 2017-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A RDB Board";
+	compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
+};
+
+&dpmac2 {
+	phy-handle = <&mdio2_aquantia_phy>;
+	phy-connection-type = "10gbase-r";
+	pcs-handle = <&pcs2>;
+};
+
+&dpmac3 {
+	phy-handle = <&mdio1_phy5>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy6>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	phy-handle = <&mdio1_phy7>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	phy-handle = <&mdio1_phy8>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_3>;
+};
+
+&dpmac7 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_3>;
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy5: ethernet-phy@c {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xc>;
+	};
+
+	mdio1_phy6: ethernet-phy@d {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xd>;
+	};
+
+	mdio1_phy7: ethernet-phy@e {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xe>;
+	};
+
+	mdio1_phy8: ethernet-phy@f {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0xf>;
+	};
+
+	mdio1_phy1: ethernet-phy@1c {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1c>;
+	};
+
+	mdio1_phy2: ethernet-phy@1d {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1d>;
+	};
+
+	mdio1_phy3: ethernet-phy@1e {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1e>;
+	};
+
+	mdio1_phy4: ethernet-phy@1f {
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1f>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	mdio2_aquantia_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x30000000 0x00010000
+		  2 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x0 0x0 0x10000>;
+	};
+
+	fpga: board-control@2,0 {
+		compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis";
+		reg = <0x2 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
new file mode 100644
index 000000000..d4867d6cf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Travese Ten64 (LS1088) board
+ * Based on fsl-ls1088a-rdb.dts
+ * Copyright 2017-2020 NXP
+ * Copyright 2019-2021 Traverse Technologies
+ *
+ * Author: Mathew McBride <matt@traverse.com.au>
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Traverse Ten64";
+	compatible = "traverse,ten64", "fsl,ls1088a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+
+		/* Fired by system controller when
+		 * external power off (e.g ATX Power Button)
+		 * asserted
+		 */
+		button-powerdn {
+			label = "External Power Down";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		/* Rear Panel 'ADMIN' button (GPIO_H) */
+		button-admin {
+			label = "ADMIN button";
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "ten64:green:sfp1:down";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "ten64:green:sfp2:up";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "ten64:admin";
+			gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sfp_xg0: dpmac2-sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfplower_i2c>;
+		tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_xg1: dpmac1-sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpupper_i2c>;
+		tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+/* XG1 - Upper SFP */
+&dpmac1 {
+	sfp = <&sfp_xg1>;
+	pcs-handle = <&pcs1>;
+	phy-connection-type = "10gbase-r";
+	managed = "in-band-status";
+};
+
+/* XG0 - Lower SFP */
+&dpmac2 {
+	sfp = <&sfp_xg0>;
+	pcs-handle = <&pcs2>;
+	phy-connection-type = "10gbase-r";
+	managed = "in-band-status";
+};
+
+/* DPMAC3..6 is GE4 to GE8 */
+&dpmac3 {
+	phy-handle = <&mdio1_phy5>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_0>;
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy6>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_1>;
+};
+
+&dpmac5 {
+	phy-handle = <&mdio1_phy7>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_2>;
+};
+
+&dpmac6 {
+	phy-handle = <&mdio1_phy8>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs3_3>;
+};
+
+/* DPMAC7..10 is GE0 to GE3 */
+&dpmac7 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_0>;
+};
+
+&dpmac8 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_1>;
+};
+
+&dpmac9 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_2>;
+};
+
+&dpmac10 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "qsgmii";
+	managed = "in-band-status";
+	pcs-handle = <&pcs7_3>;
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy5: ethernet-phy@c {
+		reg = <0xc>;
+	};
+
+	mdio1_phy6: ethernet-phy@d {
+		reg = <0xd>;
+	};
+
+	mdio1_phy7: ethernet-phy@e {
+		reg = <0xe>;
+	};
+
+	mdio1_phy8: ethernet-phy@f {
+		reg = <0xf>;
+	};
+
+	mdio1_phy1: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
+
+	mdio1_phy2: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
+
+	mdio1_phy3: ethernet-phy@1e {
+		reg = <0x1e>;
+	};
+
+	mdio1_phy4: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	sfpgpio: gpio@76 {
+		compatible = "ti,tca9539";
+		reg = <0x76>;
+		#gpio-cells = <2>;
+		gpio-controller;
+
+		admin_led_lower {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	at97sc: tpm@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	rx8035: rtc@32 {
+		compatible = "epson,rx8035";
+		reg = <0x32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpupper_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sfplower_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	en25s64: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "bl3";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "mcfirmware";
+				reg = <0x300000 0x200000>;
+			};
+
+			partition@500000 {
+				label = "ubootenv";
+				reg = <0x500000 0x80000>;
+			};
+
+			partition@580000 {
+				label = "dpl";
+				reg = <0x580000 0x40000>;
+			};
+
+			partition@5C0000 {
+				label = "dpc";
+				reg = <0x5C0000 0x40000>;
+			};
+
+			partition@600000 {
+				label = "devicetree";
+				reg = <0x600000 0x40000>;
+			};
+		};
+	};
+
+	nand: flash@1 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* reserved for future boot direct from NAND flash
+			 * (this would use the same layout as the 8MiB NOR flash)
+			 */
+			partition@0 {
+				label = "nand-boot-reserved";
+				reg = <0 0x800000>;
+			};
+
+			/* recovery / install environment */
+			partition@800000 {
+				label = "recovery";
+				reg = <0x800000 0x2000000>;
+			};
+
+			/* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
+			partition@2800000 {
+				label = "ubia";
+				reg = <0x2800000 0x6C00000>;
+			};
+
+			/* ubib (second OpenWrt) */
+			partition@9400000 {
+				label = "ubib";
+				reg = <0x9400000 0x6C00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
new file mode 100644
index 000000000..8f6090a9a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -0,0 +1,1051 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for NXP Layerscape-1088A family SoC.
+ *
+ * Copyright 2017-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "fsl,ls1088a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* We have 2 clusters having 4 Cortex-A53 cores each */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
+		};
+
+		CPU_PH20: cpu-ph20 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PH20";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+		};
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/
+		      <0x0 0x0c0c0000 0 0x2000>, /* GICC */
+		      <0x0 0x0c0d0000 0 0x1000>, /* GICH */
+		      <0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	thermal-zones {
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+			     <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+			     <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&reset>;
+		offset = <0x0>;
+		mask = <0x02>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls1088a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls1088a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		reset: syscon@1e60000 {
+			compatible = "fsl,ls1088a-reset", "syscon";
+			reg = <0x0 0x1e60000 0x0 0x10000>;
+		};
+
+		isc: syscon@1f70000 {
+			compatible = "fsl,ls1088a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000023
+				0x00000001 0x0000002a
+				0x00000002 0x00000030
+				0x00000003 0x00000037
+				0x00000004 0x0000003d
+				0x00000005 0x00000044
+				0x00000006 0x0000004a
+				0x00000007 0x00000051
+				0x00000008 0x00000057
+				0x00000009 0x0000005e
+				0x0000000a 0x00000064
+				0x0000000b 0x0000006b
+				/* Calibration data group 2 */
+				0x00010000 0x00000022
+				0x00010001 0x0000002a
+				0x00010002 0x00000032
+				0x00010003 0x0000003a
+				0x00010004 0x00000042
+				0x00010005 0x0000004a
+				0x00010006 0x00000052
+				0x00010007 0x0000005a
+				0x00010008 0x00000062
+				0x00010009 0x0000006a
+				/* Calibration data group 3 */
+				0x00020000 0x00000021
+				0x00020001 0x0000002b
+				0x00020002 0x00000035
+				0x00020003 0x00000040
+				0x00020004 0x0000004a
+				0x00020005 0x00000054
+				0x00020006 0x0000005e
+				/* Calibration data group 4 */
+				0x00030000 0x00000010
+				0x00030001 0x0000001c
+				0x00030002 0x00000027
+				0x00030003 0x00000032
+				0x00030004 0x0000003e
+				0x00030005 0x00000049
+				0x00030006 0x00000054
+				0x00030007 0x00000060>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1088a-dspi",
+				     "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			spi-num-chipselects = <6>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ifc: memory-controller@2240000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			status = "disabled";
+		};
+
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			status = "disabled";
+		};
+
+		esdhc: esdhc@2140000 {
+			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;
+			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		usb0: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1088a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+				<0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls1088a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <256>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep1: pcie-ep@3400000 {
+			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03400000 0x0 0x00100000>,
+			      <0x20 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <24>;
+			num-ob-windows = <256>;
+			max-functions = /bits/ 8 <2>;
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls1088a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep2: pcie-ep@3500000 {
+			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03500000 0x0 0x00100000>,
+			      <0x28 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <6>;
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls1088a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+			interrupt-names = "aer";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 0 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie_ep3: pcie-ep@3600000 {
+			compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep";
+			reg = <0x00 0x03600000 0x0 0x00100000>,
+			      <0x30 0x00000000 0x8 0x00000000>;
+			reg-names = "regs", "addr_space";
+			num-ib-windows = <6>;
+			num-ob-windows = <6>;
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#iommu-cells = <1>;
+			stream-match-mask = <0x7C00>;
+			dma-coherent;
+			#global-interrupts = <12>;
+				     // global secure fault
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined secure
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     // global non-secure fault
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined non-secure
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     // performance counter interrupts 0-7
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     // per context interrupt, 64 interrupts
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
+		ptp-timer@8b95000 {
+			compatible = "fsl,dpaa2-ptp";
+			reg = <0x0 0x8b95000 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			little-endian;
+			fsl,extts-fifo;
+		};
+
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
+			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3_0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			pcs3_1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			pcs3_2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			pcs3_3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7_0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			pcs7_1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			pcs7_2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			pcs7_3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core2_watchdog: wdt@c020000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc020000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core3_watchdog: wdt@c030000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc030000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core2_watchdog: wdt@c120000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc120000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core3_watchdog: wdt@c130000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc130000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
+			dma-coherent;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: ethernet@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <1>;
+				};
+
+				dpmac2: ethernet@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <2>;
+				};
+
+				dpmac3: ethernet@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <3>;
+				};
+
+				dpmac4: ethernet@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <4>;
+				};
+
+				dpmac5: ethernet@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <5>;
+				};
+
+				dpmac6: ethernet@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <6>;
+				};
+
+				dpmac7: ethernet@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <7>;
+				};
+
+				dpmac8: ethernet@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <8>;
+				};
+
+				dpmac9: ethernet@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <9>;
+				};
+
+				dpmac10: ethernet@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+				};
+			};
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1088a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
new file mode 100644
index 000000000..f6c3ee78a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a QDS Board.
+ *
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
new file mode 100644
index 000000000..8b6915136
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "disabled";
+
+	/* CS4340 PHYs */
+	mdio1_phy1: emdio1-phy@10 {
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: emdio1-phy@11 {
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: emdio1-phy@12 {
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: emdio1-phy@13 {
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	/* AQR405 PHYs */
+	mdio2_phy1: emdio2-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: emdio2-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: emdio2-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: emdio2-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
new file mode 100644
index 000000000..551730503
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080a software Simulator model
+ *
+ * Copyright 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a software Simulator model";
+	compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+	ethernet@2210000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		interrupts = <0 58 0x1>;
+	};
+};
+
+&ifc {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
new file mode 100644
index 000000000..1aa38ed09
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2014-2016 Freescale Semiconductor, Inc.
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x1>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu4: cpu@200 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x200>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu5: cpu@201 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x201>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu6: cpu@300 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x300>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		next-level-cache = <&cluster3_l2>;
+		cpu-idle-states = <&CPU_PW20>;
+		#cooling-cells = <2>;
+	};
+
+	cpu7: cpu@301 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x301>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cluster0_l2: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster1_l2: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster2_l2: l2-cache2 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster3_l2: l2-cache3 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x00010000>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
+};
+
+&pcie1 {
+	reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+	      <0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie2 {
+	reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+	      <0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie3 {
+	reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+	      <0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&pcie4 {
+	reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+	      <0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
+		  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+};
+
+&timer {
+	fsl,erratum-a008585;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
new file mode 100644
index 000000000..4461e16fd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS2081A RDB Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Priyanka Jain <priyanka.jain@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+
+/ {
+	model = "NXP Layerscape 2081A RDB Board";
+	compatible = "fsl,ls2081a-rdb", "fsl,ls2081a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dspi {
+	status = "okay";
+
+	n25q512a: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	status = "disabled";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
new file mode 100644
index 000000000..7c17b1bd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2088A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-qds.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A QDS Board";
+	compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
new file mode 100644
index 000000000..3e4e857db
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2088A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls2088a.dtsi"
+#include "fsl-ls208xa-rdb.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2088A RDB Board";
+	compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&dpmac1 {
+	phy-handle = <&mdio1_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac2 {
+	phy-handle = <&mdio1_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac3 {
+	phy-handle = <&mdio1_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac4 {
+	phy-handle = <&mdio1_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac5 {
+	phy-handle = <&mdio2_phy1>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac6 {
+	phy-handle = <&mdio2_phy2>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac7 {
+	phy-handle = <&mdio2_phy3>;
+	phy-connection-type = "10gbase-r";
+};
+
+&dpmac8 {
+	phy-handle = <&mdio2_phy4>;
+	phy-connection-type = "10gbase-r";
+};
+
+&emdio1 {
+	status = "okay";
+
+	mdio1_phy1: ethernet-phy@10 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x10>;
+	};
+
+	mdio1_phy2: ethernet-phy@11 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x11>;
+	};
+
+	mdio1_phy3: ethernet-phy@12 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x12>;
+	};
+
+	mdio1_phy4: ethernet-phy@13 {
+		compatible = "ethernet-phy-id13e5.1002";
+		reg = <0x13>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	mdio2_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x0>;
+	};
+
+	mdio2_phy2: ethernet-phy@1 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1>;
+	};
+
+	mdio2_phy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2>;
+	};
+
+	mdio2_phy4: ethernet-phy@3 {
+		compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x3>;
+	};
+};
+
+&pcs_mdio1 {
+	status = "okay";
+};
+
+&pcs_mdio2 {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio4 {
+	status = "okay";
+};
+
+&pcs_mdio5 {
+	status = "okay";
+};
+
+&pcs_mdio6 {
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&pcs_mdio8 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
new file mode 100644
index 000000000..8581ea55d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include "fsl-ls208xa.dtsi"
+
+&cpu {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x0>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x1>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x100>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x101>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu4: cpu@200 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x200>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		next-level-cache = <&cluster2_l2>;
+		cpu-idle-states = <&CPU_PW20>;
+		#cooling-cells = <2>;
+	};
+
+	cpu5: cpu@201 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x201>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu6: cpu@300 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x300>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cpu7: cpu@301 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a72";
+		reg = <0x301>;
+		clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+		cpu-idle-states = <&CPU_PW20>;
+		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
+	};
+
+	cluster0_l2: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster1_l2: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster2_l2: l2-cache2 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	cluster3_l2: l2-cache3 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	CPU_PW20: cpu-pw20 {
+		compatible = "arm,idle-state";
+		idle-state-name = "PW20";
+		arm,psci-suspend-param = <0x0>;
+		entry-latency-us = <2000>;
+		exit-latency-us = <2000>;
+		min-residency-us = <6000>;
+	};
+};
+
+&pcie1 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+	      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>;
+};
+
+&pcie2 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+	      <0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>;
+};
+
+&pcie3 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+	      <0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>;
+};
+
+&pcie4 {
+	compatible = "fsl,ls2088a-pcie";
+	reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+	      <0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+
+	ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000
+		  0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
new file mode 100644
index 000000000..e2c94da6d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080A QDS Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
+&dpmac9 {
+	phy-handle = <&mdio0_phy12>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac10 {
+	phy-handle = <&mdio0_phy13>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac11 {
+	phy-handle = <&mdio0_phy14>;
+	phy-connection-type = "sgmii";
+};
+
+&dpmac12 {
+	phy-handle = <&mdio0_phy15>;
+	phy-connection-type = "sgmii";
+};
+
+&esdhc {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	boardctrl: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd";
+		reg = <3 0 0x1000>;
+		ranges = <0 3 0 0x1000>;
+
+		mdio-mux-emi1@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			mdio-parent-bus = <&emdio1>;
+			reg = <0x54 1>;		/* BRDCFG4 */
+			mux-mask = <0xe0>;	/* EMI1_MDIO */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Child MDIO buses, one for each riser card:
+			 * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
+			 * VSC8234 PHYs on the riser cards.
+			 */
+			mdio_mux3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio0_phy12: mdio-phy0@1c {
+					reg = <0x1c>;
+				};
+
+				mdio0_phy13: mdio-phy1@1d {
+					reg = <0x1d>;
+				};
+
+				mdio0_phy14: mdio-phy2@1e {
+					reg = <0x1e>;
+				};
+
+				mdio0_phy15: mdio-phy3@1f {
+					reg = <0x1f>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+	dflash1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <1>;
+	};
+	dflash2: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <0>;
+	};
+	flash2: flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		reg = <2>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
new file mode 100644
index 000000000..537cecb13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Freescale LS2080A RDB Board.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-mux@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ_RTC_B -> IRQ06, active low */
+				interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
new file mode 100644
index 000000000..717288bbd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -0,0 +1,1260 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ *
+ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls2080a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+	};
+
+	cpu: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
+			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
+			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	rstcr: syscon@1e60000 {
+		compatible = "fsl,ls2080a-rstcr", "syscon";
+		reg = <0x0 0x1e60000 0x0 0x4>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&rstcr>;
+		offset = <0x0>;
+		mask = <0x2>;
+	};
+
+	thermal-zones {
+		ddr-controller1 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-ctrler1-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-controller2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				ddr-ctrler2-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-controller3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				ddr-ctrler3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster1 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				core_cluster1_alert: core-cluster1-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster1-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster1_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		core-cluster2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				core_cluster2_alert: core-cluster2-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster2-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster2_alert>;
+					cooling-device =
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		core-cluster3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				core_cluster3_alert: core-cluster3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster3_alert>;
+					cooling-device =
+						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		core-cluster4 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 7>;
+
+			trips {
+				core_cluster4_alert: core-cluster4-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core-cluster4-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster4_alert>;
+					cooling-device =
+						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
+			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 4>, /* Virtual PPI, active-low */
+			     <1 10 4>; /* Hypervisor PPI, active-low */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls2080a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls2080a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		isc: syscon@1f70000 {
+			compatible = "fsl,ls2080a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
+			fsl,tmu-calibration = <0x00000000 0x00000026
+					       0x00000001 0x0000002d
+					       0x00000002 0x00000032
+					       0x00000003 0x00000039
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000046
+					       0x00000006 0x0000004d
+					       0x00000007 0x00000054
+					       0x00000008 0x0000005a
+					       0x00000009 0x00000061
+					       0x0000000a 0x0000006a
+					       0x0000000b 0x00000071
+
+					       0x00010000 0x00000025
+					       0x00010001 0x0000002c
+					       0x00010002 0x00000035
+					       0x00010003 0x0000003d
+					       0x00010004 0x00000045
+					       0x00010005 0x0000004e
+					       0x00010006 0x00000057
+					       0x00010007 0x00000061
+					       0x00010008 0x0000006b
+					       0x00010009 0x00000076
+
+					       0x00020000 0x00000029
+					       0x00020001 0x00000033
+					       0x00020002 0x0000003d
+					       0x00020003 0x00000049
+					       0x00020004 0x00000056
+					       0x00020005 0x00000061
+					       0x00020006 0x0000006d
+
+					       0x00030000 0x00000021
+					       0x00030001 0x0000002a
+					       0x00030002 0x0000003c
+					       0x00030003 0x0000004e>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		serial0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 33 0x4>; /* Level high type */
+		};
+
+		serial3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			interrupts = <0 33 0x4>; /* Level high type */
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster3_core0_watchdog: wdt@c200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc200000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster3_core1_watchdog: wdt@c210000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc210000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster4_core0_watchdog: wdt@c300000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc300000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		cluster4_core1_watchdog: wdt@c310000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xc310000 0x0 0x1000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <8>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
+		ptp-timer@8b95000 {
+			compatible = "fsl,dpaa2-ptp";
+			reg = <0x0 0x8b95000 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			little-endian;
+			fsl,extts-fifo;
+		};
+
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio4: mdio@8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs4: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio5: mdio@8c17000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs5: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio6: mdio@8c1b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs6: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio8: mdio@8c23000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs8: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio9: mdio@8c27000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c27000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs9: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio10: mdio@8c2b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs10: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio11: mdio@8c2f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs11: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio12: mdio@8c33000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c33000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs12: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio13: mdio@8c37000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c37000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs13: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio14: mdio@8c3b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs14: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio15: mdio@8c3f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs15: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio16: mdio@8c43000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c43000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs16: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+			msi-parent = <&its>;
+			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
+			dma-coherent;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: ethernet@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+					pcs-handle = <&pcs1>;
+				};
+
+				dpmac2: ethernet@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+					pcs-handle = <&pcs2>;
+				};
+
+				dpmac3: ethernet@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+					pcs-handle = <&pcs3>;
+				};
+
+				dpmac4: ethernet@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+					pcs-handle = <&pcs4>;
+				};
+
+				dpmac5: ethernet@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+					pcs-handle = <&pcs5>;
+				};
+
+				dpmac6: ethernet@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+					pcs-handle = <&pcs6>;
+				};
+
+				dpmac7: ethernet@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+					pcs-handle = <&pcs7>;
+				};
+
+				dpmac8: ethernet@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+					pcs-handle = <&pcs8>;
+				};
+
+				dpmac9: ethernet@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+					pcs-handle = <&pcs9>;
+				};
+
+				dpmac10: ethernet@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+					pcs-handle = <&pcs10>;
+				};
+
+				dpmac11: ethernet@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+					pcs-handle = <&pcs11>;
+				};
+
+				dpmac12: ethernet@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+					pcs-handle = <&pcs12>;
+				};
+
+				dpmac13: ethernet@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+					pcs-handle = <&pcs13>;
+				};
+
+				dpmac14: ethernet@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+					pcs-handle = <&pcs14>;
+				};
+
+				dpmac15: ethernet@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+					pcs-handle = <&pcs15>;
+				};
+
+				dpmac16: ethernet@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+					pcs-handle = <&pcs16>;
+				};
+			};
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <12>;
+			#iommu-cells = <1>;
+			stream-match-mask = <0x7C00>;
+			dma-coherent;
+			interrupts = <0 13 4>, /* global secure fault */
+				     <0 14 4>, /* combined secure interrupt */
+				     <0 15 4>, /* global non-secure fault */
+				     <0 16 4>, /* combined non-secure interrupt */
+				/* performance counter interrupts 0-7 */
+				     <0 211 4>, <0 212 4>,
+				     <0 213 4>, <0 214 4>,
+				     <0 215 4>, <0 216 4>,
+				     <0 217 4>, <0 218 4>,
+				/* per context interrupt, 64 interrupts */
+				     <0 146 4>, <0 147 4>,
+				     <0 148 4>, <0 149 4>,
+				     <0 150 4>, <0 151 4>,
+				     <0 152 4>, <0 153 4>,
+				     <0 154 4>, <0 155 4>,
+				     <0 156 4>, <0 157 4>,
+				     <0 158 4>, <0 159 4>,
+				     <0 160 4>, <0 161 4>,
+				     <0 162 4>, <0 163 4>,
+				     <0 164 4>, <0 165 4>,
+				     <0 166 4>, <0 167 4>,
+				     <0 168 4>, <0 169 4>,
+				     <0 170 4>, <0 171 4>,
+				     <0 172 4>, <0 173 4>,
+				     <0 174 4>, <0 175 4>,
+				     <0 176 4>, <0 177 4>,
+				     <0 178 4>, <0 179 4>,
+				     <0 180 4>, <0 181 4>,
+				     <0 182 4>, <0 183 4>,
+				     <0 184 4>, <0 185 4>,
+				     <0 186 4>, <0 187 4>,
+				     <0 188 4>, <0 189 4>,
+				     <0 190 4>, <0 191 4>,
+				     <0 192 4>, <0 193 4>,
+				     <0 194 4>, <0 195 4>,
+				     <0 196 4>, <0 197 4>,
+				     <0 198 4>, <0 199 4>,
+				     <0 200 4>, <0 201 4>,
+				     <0 202 4>, <0 203 4>,
+				     <0 204 4>, <0 205 4>,
+				     <0 206 4>, <0 207 4>,
+				     <0 208 4>, <0 209 4>;
+		};
+
+		dspi: spi@2100000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 26 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+		};
+
+		esdhc: esdhc@2140000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0: i2c@2000000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		i2c1: i2c@2010000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		i2c2: i2c@2020000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		i2c3: i2c@2030000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+		};
+
+		ifc: memory-controller@2240000 {
+			compatible = "fsl,ifc";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 0x4>; /* Level high type */
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x5 0x80000000 0x08000000
+				  2 0 0x5 0x30000000 0x00010000
+				  3 0 0x5 0x20000000 0x00010000>;
+		};
+
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "qspi_en", "qspi";
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 108 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+					<0000 0 0 2 &gic 0 0 0 110 4>,
+					<0000 0 0 3 &gic 0 0 0 111 4>,
+					<0000 0 0 4 &gic 0 0 0 112 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 113 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+					<0000 0 0 2 &gic 0 0 0 115 4>,
+					<0000 0 0 3 &gic 0 0 0 116 4>,
+					<0000 0 0 4 &gic 0 0 0 117 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <256>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+					<0000 0 0 2 &gic 0 0 0 120 4>,
+					<0000 0 0 3 &gic 0 0 0 121 4>,
+					<0000 0 0 4 &gic 0 0 0 122 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie4: pcie@3700000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
+			reg-names = "regs", "config";
+			interrupts = <0 123 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			num-viewport = <6>;
+			bus-range = <0x0 0xff>;
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+					<0000 0 0 2 &gic 0 0 0 125 4>,
+					<0000 0 0 3 &gic 0 0 0 126 4>,
+					<0000 0 0 4 &gic 0 0 0 127 4>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		sata0: sata@3200000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+		};
+
+		sata1: sata@3210000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+		};
+
+		bus: bus {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			compatible = "simple-bus";
+			ranges;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
+
+			usb0: usb@3100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3100000 0x0 0x10000>;
+				interrupts = <0 80 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+
+			usb1: usb@3110000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x3110000 0x0 0x10000>;
+				interrupts = <0 81 0x4>; /* Level high type */
+				dr_mode = "host";
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,dis_rxdet_inp3_quirk;
+				snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+				status = "disabled";
+			};
+		};
+
+		ccn@4000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0x04000000 0x0 0x01000000>;
+			interrupts = <0 12 4>;
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls208xa-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <0 17 0x4>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <0 18 0x4>;
+		little-endian;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts
new file mode 100644
index 000000000..15d273c93
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A BLUEBOX3
+//
+// Copyright 2020-2021 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a-bluebox3.dts"
+
+/ {
+	compatible = "fsl,lx2160a-bluebox3-rev-a", "fsl,lx2160a";
+};
+
+/* The RGMII PHYs have a different MDIO address */
+&emdio1 {
+	/delete-node/ ethernet-phy@5;
+
+	sw1_mii3_phy: ethernet-phy@1 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/delete-node/ ethernet-phy@6;
+
+	sw2_mii3_phy: ethernet-phy@2 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
new file mode 100644
index 000000000..042c486bd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A BLUEBOX3
+//
+// Copyright 2020-2021 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ABLUEBOX3";
+	compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&can0 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac5 {
+	phy-handle = <&aqr113c_phy1>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac6 {
+	phy-handle = <&aqr113c_phy2>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac9 {
+	phy-handle = <&aqr113c_phy3>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac10 {
+	phy-handle = <&aqr113c_phy4>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac17 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&dpmac18 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+
+	aqr113c_phy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		/* IRQ_10G_PHY2 */
+		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	aqr113c_phy1: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		/* IRQ_10G_PHY1 */
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	sw1_mii3_phy: ethernet-phy@5 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x5>;
+		interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	sw2_mii3_phy: ethernet-phy@6 {
+		/* AR8035 */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x6>;
+		interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	aqr113c_phy4: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x0>;
+		/* IRQ_10G_PHY4 */
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	aqr113c_phy3: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0x8>;
+		/* IRQ_10G_PHY3 */
+		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+
+	mt35xu512aba1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp2: temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			temp1: temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@75 {
+				compatible = "nxp,pca9547";
+				reg = <0x75>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					spi_bridge: spi@28 {
+						compatible = "nxp,sc18is602b";
+						reg = <0x28>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9846";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			/* The I2C multiplexer and temperature sensors are on
+			 * the T6 riser card.
+			 */
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+
+					q12: temperature-sensor@4c {
+						compatible = "nxp,sa56004";
+						reg = <0x4c>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+				};
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+
+					q11: temperature-sensor@4c {
+						compatible = "nxp,sa56004";
+						reg = <0x4c>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+
+					q13: temperature-sensor@48 {
+						compatible = "nxp,sa56004";
+						reg = <0x48>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+
+					q14: temperature-sensor@4a {
+						compatible = "nxp,sa56004";
+						reg = <0x4a>;
+						vcc-supply = <&sb_3v3>;
+						#thermal-sensor-cells = <1>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pcs_mdio5 {
+	status = "okay";
+};
+
+&pcs_mdio6 {
+	status = "okay";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
+
+&spi_bridge {
+	sw1: ethernet-switch@0 {
+		compatible = "nxp,sja1110a";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		spi-cpol;
+		dsa,member = <0 0>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Microcontroller port */
+			port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			/* SW1_P1 */
+			port@1 {
+				reg = <1>;
+				label = "con_2x20";
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				ethernet = <&dpmac17>;
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "1ge_p1";
+				phy-mode = "rgmii-id";
+				phy-handle = <&sw1_mii3_phy>;
+			};
+
+			sw1p4: port@4 {
+				reg = <4>;
+				link = <&sw2p1>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "trx1";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port5_base_t1_phy>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "trx2";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port6_base_t1_phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "trx3";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port7_base_t1_phy>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "trx4";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port8_base_t1_phy>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "trx5";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port9_base_t1_phy>;
+			};
+
+			port@a {
+				reg = <10>;
+				label = "trx6";
+				phy-mode = "internal";
+				phy-handle = <&sw1_port10_base_t1_phy>;
+			};
+		};
+
+		mdios {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				compatible = "nxp,sja1110-base-t1-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				sw1_port5_base_t1_phy: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				sw1_port6_base_t1_phy: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				sw1_port7_base_t1_phy: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+
+				sw1_port8_base_t1_phy: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				sw1_port9_base_t1_phy: ethernet-phy@5 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x5>;
+				};
+
+				sw1_port10_base_t1_phy: ethernet-phy@6 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+				};
+			};
+		};
+	};
+
+	sw2: ethernet-switch@2 {
+		compatible = "nxp,sja1110a";
+		reg = <2>;
+		spi-max-frequency = <4000000>;
+		spi-cpol;
+		dsa,member = <0 1>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Microcontroller port */
+			port@0 {
+				reg = <0>;
+				status = "disabled";
+			};
+
+			sw2p1: port@1 {
+				reg = <1>;
+				link = <&sw1p4>;
+				phy-mode = "sgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				ethernet = <&dpmac18>;
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "1ge_p2";
+				phy-mode = "rgmii-id";
+				phy-handle = <&sw2_mii3_phy>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "to_sw3";
+				phy-mode = "2500base-x";
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "trx7";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port5_base_t1_phy>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "trx8";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port6_base_t1_phy>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "trx9";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port7_base_t1_phy>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "trx10";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port8_base_t1_phy>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "trx11";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port9_base_t1_phy>;
+			};
+
+			port@a {
+				reg = <10>;
+				label = "trx12";
+				phy-mode = "internal";
+				phy-handle = <&sw2_port10_base_t1_phy>;
+			};
+		};
+
+		mdios {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mdio@0 {
+				compatible = "nxp,sja1110-base-t1-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				sw2_port5_base_t1_phy: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				sw2_port6_base_t1_phy: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				sw2_port7_base_t1_phy: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+
+				sw2_port8_base_t1_phy: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				sw2_port9_base_t1_phy: ethernet-phy@5 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x5>;
+				};
+
+				sw2_port10_base_t1_phy: ethernet-phy@6 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+				};
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
new file mode 100644
index 000000000..d32a52ab0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "SolidRun LX2160A COM Express Type 7 module";
+	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "RT7290";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <1>;
+		qca,smarteee-tw-us-1g = <24>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c512";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,spd";
+				reg = <0x51>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,spd";
+				reg = <0x53>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			fan-temperature-ctrlr@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				cooling-min-state = <0>;
+				cooling-max-state = <9>;
+				#cooling-cells = <2>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			regulator@5c {
+				compatible = "lltc,ltc3882";
+				reg = <0x5c>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+
+		sfp0_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		sfp1_i2c: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		sfp2_i2c: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		sfp3_i2c: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
new file mode 100644
index 000000000..86a9b7714
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog CX board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Clearfog CX";
+	compatible = "solidrun,clearfog-cx",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
new file mode 100644
index 000000000..a7dcbecc1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog ITX board; this contains the
+// common parts shared between the Clearfog CX and Honeycomb builds.
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-cex7.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key {
+			label = "power";
+			linux,can-disable;
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp0: sfp-0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp0_i2c>;
+		mod-def0-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp1_i2c>;
+		mod-def0-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp2_i2c>;
+		mod-def0-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp3: sfp-3 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp3_i2c>;
+		mod-def0-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&dpmac7 {
+	sfp = <&sfp0>;
+	managed = "in-band-status";
+	phys = <&serdes_1 3>;
+};
+
+&dpmac8 {
+	sfp = <&sfp1>;
+	managed = "in-band-status";
+	phys = <&serdes_1 2>;
+};
+
+&dpmac9 {
+	sfp = <&sfp2>;
+	managed = "in-band-status";
+	phys = <&serdes_1 1>;
+};
+
+&dpmac10 {
+	sfp = <&sfp3>;
+	managed = "in-band-status";
+	phys = <&serdes_1 0>;
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&pcs_mdio7 {
+	status = "okay";
+};
+
+&pcs_mdio8 {
+	status = "okay";
+};
+
+&pcs_mdio9 {
+	status = "okay";
+};
+
+&pcs_mdio10 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
new file mode 100644
index 000000000..fe19f3009
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Honeycomb board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Honeycomb";
+	compatible = "solidrun,honeycomb",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
new file mode 100644
index 000000000..4d721197d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160AQDS
+//
+// Copyright 2018 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160AQDS";
+	compatible = "fsl,lx2160a-qds", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&emdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* On-board PHY #1 RGMI1*/
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@8 { /* On-board PHY #2 RGMI2*/
+			reg = <0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@18 { /* Slot #1 */
+			reg = <0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@19 { /* Slot #2 */
+			reg = <0x19>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1a { /* Slot #3 */
+			reg = <0x1a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1b { /* Slot #4 */
+			reg = <0x1b>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1c { /* Slot #5 */
+			reg = <0x1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1d { /* Slot #6 */
+			reg = <0x1d>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1e { /* Slot #7 */
+			reg = <0x1e>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1f { /* Slot #8 */
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 1>;
+		mdio-parent-bus = <&emdio2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* Slot #1 (secondary EMI) */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1 { /* Slot #2 (secondary EMI) */
+			reg = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@2 { /* Slot #3 (secondary EMI) */
+			reg = <0x02>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@3 { /* Slot #4 (secondary EMI) */
+			reg = <0x03>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@4 { /* Slot #5 (secondary EMI) */
+			reg = <0x04>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@5 { /* Slot #6 (secondary EMI) */
+			reg = <0x05>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@6 { /* Slot #7 (secondary EMI) */
+			reg = <0x06>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@7 { /* Slot #8 (secondary EMI) */
+			reg = <0x07>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	fpga@66 {
+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+					<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			temperature-sensor@4d {
+				compatible = "nxp,sa56004";
+				reg = <0x4d>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&optee {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
new file mode 100644
index 000000000..0c44b3cbe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160ARDB
+//
+// Copyright 2018-2020 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2160ARDB";
+	compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MC34717-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac3 {
+	phy-handle = <&aquantia_phy1>;
+	phy-connection-type = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac4 {
+	phy-handle = <&aquantia_phy2>;
+	phy-connection-type = "usxgmii";
+	managed = "in-band-status";
+};
+
+&dpmac5 {
+	phy-handle = <&inphi_phy>;
+};
+
+&dpmac6 {
+	phy-handle = <&inphi_phy>;
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x1>;
+		eee-broken-1000t;
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2>;
+		eee-broken-1000t;
+	};
+
+	aquantia_phy1: ethernet-phy@4 {
+		/* AQR107 PHY */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x4>;
+	};
+
+	aquantia_phy2: ethernet-phy@5 {
+		/* AQR107 PHY */
+		compatible = "ethernet-phy-ieee802.3-c45";
+		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x5>;
+	};
+};
+
+&can0 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&emdio2 {
+	status = "okay";
+
+	inphi_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0210.7440";
+		reg = <0x0>;
+	};
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+
+	mt35xu512aba1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <1>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			temperature-sensor@4d {
+				compatible = "nxp,sa56004";
+				reg = <0x4d>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		/* IRQ_RTC_B -> IRQ08, active low */
+		interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&optee {
+	status = "okay";
+};
+
+&pcs_mdio3 {
+	status = "okay";
+};
+
+&pcs_mdio4 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
new file mode 100644
index 000000000..ea6a94b57
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -0,0 +1,1792 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree Include file for Layerscape-LX2160A family SoC.
+//
+// Copyright 2018-2020 NXP
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,lx2160a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		// 8 clusters having 2 Cortex-A72 cores each
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x0>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster0_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x1>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster0_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu100: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x100>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster1_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu101: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x101>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster1_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu200: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x200>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster2_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu201: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x201>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster2_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu300: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x300>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster3_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu301: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x301>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster3_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu400: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x400>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 4>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster4_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu401: cpu@401 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x401>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 4>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster4_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu500: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x500>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 5>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster5_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu501: cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x501>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 5>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster5_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu600: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x600>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 6>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster6_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu601: cpu@601 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x601>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 6>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster6_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu700: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x700>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 7>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster7_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cpu701: cpu@701 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x701>;
+			clocks = <&clockgen QORIQ_CLK_CMUX 7>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <192>;
+			next-level-cache = <&cluster7_l2>;
+			cpu-idle-states = <&cpu_pw15>;
+			#cooling-cells = <2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster4_l2: l2-cache4 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster5_l2: l2-cache5 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster6_l2: l2-cache6 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cluster7_l2: l2-cache7 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+
+		cpu_pw15: cpu-pw15 {
+			compatible = "arm,idle-state";
+			idle-state-name = "PW15";
+			arm,psci-suspend-param = <0x0>;
+			entry-latency-us = <2000>;
+			exit-latency-us = <2000>;
+			min-residency-us = <6000>;
+		  };
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, // GIC Dist
+			<0x0 0x06200000 0 0x200000>, // GICR (RD_base +
+						     // SGI_base)
+			<0x0 0x0c0c0000 0 0x2000>, // GICC
+			<0x0 0x0c0d0000 0 0x1000>, // GICH
+			<0x0 0x0c0e0000 0 0x20000>; // GICV
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its: msi-controller@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	memory@80000000 {
+		// DRAM space - 1, size : 2 GB DRAM
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+
+	ddr1: memory-controller@1080000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+	};
+
+	ddr2: memory-controller@1090000 {
+		compatible = "fsl,qoriq-memory-controller";
+		reg = <0x0 0x1090000 0x0 0x1000>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		little-endian;
+	};
+
+	// One clock unit-sysclk node which bootloader require during DT fix-up
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>; // fixed up by bootloader
+		clock-output-names = "sysclk";
+	};
+
+	thermal-zones {
+		cluster6-7 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cluster6_7_alert: cluster6-7-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster6_7_crit: cluster6-7-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cluster6_7_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		ddr-cluster5 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				ddr-cluster5-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-cluster5-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wriop {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				wriop-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wriop-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		dce-qbman-hsio2 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 3>;
+
+			trips {
+				dce-qbman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				dce-qbman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ccn-dpaa-tbu {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				ccn-dpaa-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ccn-dpaa-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster4-hsio3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 5>;
+
+			trips {
+				clust4-hsio3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				clust4-hsio3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster2-3 {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 6>;
+
+			trips {
+				cluster2-3-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster2-3-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+		serdes_1: phy@1ea0000 {
+			compatible = "fsl,lynx-28g";
+			reg = <0x0 0x1ea0000 0x0 0x1e30>;
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@8000000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00 0x8000000 0x100000>;
+			reg = <0x00 0x8000000 0x0 0x100000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+					     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		clockgen: clock-controller@1300000 {
+			compatible = "fsl,lx2160a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dcfg: syscon@1e00000 {
+			compatible = "fsl,lx2160a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
+		sfp: efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "sfp";
+		};
+
+		isc: syscon@1f70000 {
+			compatible = "fsl,lx2160a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xf 0x0>;
+			};
+		};
+
+		tmu: tmu@1f80000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tmu-range = <0x800000e6 0x8001017d>;
+			fsl,tmu-calibration =
+				/* Calibration data group 1 */
+				<0x00000000 0x00000035
+				/* Calibration data group 2 */
+				0x00000001 0x00000154>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2c0: i2c@2000000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			scl-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2010000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@2020000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@2030000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@2040000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2040000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			scl-gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@2050000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2050000 0x0 0x10000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@2060000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2060000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@2070000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2070000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(16)>;
+			status = "disabled";
+		};
+
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>,
+				 <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
+		dspi0: spi@2100000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
+		esdhc0: esdhc@2140000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dma-coherent;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: esdhc@2150000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <0 63 0x4>; /* Level high type */
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			dma-coherent;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			broken-cd;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		can0: can@2180000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_SYSCLK 0>;
+			clock-names = "ipg", "per";
+			fsl,clk-source = /bits/ 8 <0>;
+			status = "disabled";
+		};
+
+		can1: can@2190000 {
+			compatible = "fsl,lx2160ar1-flexcan";
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(8)>,
+				 <&clockgen QORIQ_CLK_SYSCLK 0>;
+			clock-names = "ipg", "per";
+			fsl,clk-source = /bits/ 8 <0>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart1: serial@21d0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21d0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart2: serial@21e0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21e0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		uart3: serial@21f0000 {
+			compatible = "arm,sbsa-uart","arm,pl011";
+			reg = <0x0 0x21f0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			current-speed = <115200>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@23a0000 {
+			compatible = "arm,sbsa-gwdt";
+			reg = <0x0 0x23a0000 0 0x1000>,
+			      <0x0 0x2390000 0 0x1000>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			timeout-sec = <30>;
+		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,lx2160a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb0: usb@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		usb1: usb@3110000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+			usb3-lpm-capable;
+			snps,dis_rxdet_inp3_quirk;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
+		};
+
+		sata0: sata@3200000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata1: sata@3210000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata2: sata@3220000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata3: sata@3230000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(4)>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		pcie1: pcie@3400000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+			      <0x80 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie2: pcie@3500000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
+			      <0x88 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie3: pcie@3600000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000>, /* controller registers */
+			      <0x90 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x90 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie4: pcie@3700000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000>, /* controller registers */
+			      <0x98 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0x98 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie5: pcie@3800000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03800000 0x0 0x00100000>, /* controller registers */
+			      <0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <256>;
+			ppio-wins = <24>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa0 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		pcie6: pcie@3900000 {
+			compatible = "fsl,lx2160a-pcie";
+			reg = <0x00 0x03900000 0x0 0x00100000>, /* controller registers */
+			      <0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "csr_axi_slave", "config_axi_slave";
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			interrupt-names = "aer", "pme", "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			apio-wins = <8>;
+			ppio-wins = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x82000000 0x0 0x40000000 0xa8 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic 0 0 GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic 0 0 GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic 0 0 GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+			status = "disabled";
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <14>;
+				     // global secure fault
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined secure
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     // global non-secure fault
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     // combined non-secure
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     // performance counter interrupts 0-9
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     // per context interrupt, 64 interrupts
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
+		ptp-timer@8b95000 {
+			compatible = "fsl,dpaa2-ptp";
+			reg = <0x0 0x8b95000 0x0 0x100>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			little-endian;
+			fsl,extts-fifo;
+		};
+
+		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
+			status = "disabled";
+		};
+
+		pcs_mdio1: mdio@8c07000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c07000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio2: mdio@8c0b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs2: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio3: mdio@8c0f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c0f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs3: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio4: mdio@8c13000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c13000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs4: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio5: mdio@8c17000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c17000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs5: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio6: mdio@8c1b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs6: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio7: mdio@8c1f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c1f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs7: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio8: mdio@8c23000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c23000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs8: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio9: mdio@8c27000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c27000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs9: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio10: mdio@8c2b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs10: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio11: mdio@8c2f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c2f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs11: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio12: mdio@8c33000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c33000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs12: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio13: mdio@8c37000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c37000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs13: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio14: mdio@8c3b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs14: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio15: mdio@8c3f000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c3f000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs15: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio16: mdio@8c43000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c43000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs16: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio17: mdio@8c47000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c47000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs17: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		pcs_mdio18: mdio@8c4b000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8c4b000 0x0 0x1000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			pcs18: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,
+			      <0x00000000 0x08340000 0 0x40000>;
+			msi-parent = <&its>;
+			/* iommu-map property is fixed up by u-boot */
+			iommu-map = <0 &smmu 0 0>;
+			dma-coherent;
+			#address-cells = <3>;
+			#size-cells = <1>;
+
+			/*
+			 * Region type 0x0 - MC portals
+			 * Region type 0x1 - QBMAN portals
+			 */
+			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+			/*
+			 * Define the maximum number of MACs present on the SoC.
+			 */
+			dpmacs {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpmac1: ethernet@1 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x1>;
+					pcs-handle = <&pcs1>;
+				};
+
+				dpmac2: ethernet@2 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x2>;
+					pcs-handle = <&pcs2>;
+				};
+
+				dpmac3: ethernet@3 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x3>;
+					pcs-handle = <&pcs3>;
+				};
+
+				dpmac4: ethernet@4 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x4>;
+					pcs-handle = <&pcs4>;
+				};
+
+				dpmac5: ethernet@5 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x5>;
+					pcs-handle = <&pcs5>;
+				};
+
+				dpmac6: ethernet@6 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x6>;
+					pcs-handle = <&pcs6>;
+				};
+
+				dpmac7: ethernet@7 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x7>;
+					pcs-handle = <&pcs7>;
+				};
+
+				dpmac8: ethernet@8 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x8>;
+					pcs-handle = <&pcs8>;
+				};
+
+				dpmac9: ethernet@9 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x9>;
+					pcs-handle = <&pcs9>;
+				};
+
+				dpmac10: ethernet@a {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xa>;
+					pcs-handle = <&pcs10>;
+				};
+
+				dpmac11: ethernet@b {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xb>;
+					pcs-handle = <&pcs11>;
+				};
+
+				dpmac12: ethernet@c {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xc>;
+					pcs-handle = <&pcs12>;
+				};
+
+				dpmac13: ethernet@d {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xd>;
+					pcs-handle = <&pcs13>;
+				};
+
+				dpmac14: ethernet@e {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xe>;
+					pcs-handle = <&pcs14>;
+				};
+
+				dpmac15: ethernet@f {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0xf>;
+					pcs-handle = <&pcs15>;
+				};
+
+				dpmac16: ethernet@10 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x10>;
+					pcs-handle = <&pcs16>;
+				};
+
+				dpmac17: ethernet@11 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x11>;
+					pcs-handle = <&pcs17>;
+				};
+
+				dpmac18: ethernet@12 {
+					compatible = "fsl,qoriq-mc-dpmac";
+					reg = <0x12>;
+					pcs-handle = <&pcs18>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
new file mode 100644
index 000000000..9f5ff1ffe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2162AQDS
+//
+// Copyright 2020 NXP
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "NXP Layerscape LX2162AQDS";
+	compatible = "fsl,lx2162a-qds", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+		mmc0 = &esdhc0;
+		mmc1 = &esdhc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LTM4619-3.3VSB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 0>;
+		mdio-parent-bus = <&emdio1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x1>;
+				eee-broken-1000t;
+			};
+		};
+
+		mdio@8 { /* On-board RTL8211F PHY #2 RGMII2 */
+			reg = <0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				compatible = "ethernet-phy-id001c.c916";
+				reg = <0x2>;
+				eee-broken-1000t;
+			};
+		};
+
+		mdio@18 { /* Slot #1 */
+			reg = <0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@19 { /* Slot #2 */
+			reg = <0x19>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1a { /* Slot #3 */
+			reg = <0x1a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1b { /* Slot #4 */
+			reg = <0x1b>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1c { /* Slot #5 */
+			reg = <0x1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1d { /* Slot #6 */
+			reg = <0x1d>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1e { /* Slot #7 */
+			reg = <0x1e>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1f { /* Slot #8 */
+			reg = <0x1f>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mux-2 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mux 1>;
+		mdio-parent-bus = <&emdio2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 { /* Slot #1 (secondary EMI) */
+			reg = <0x00>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@1 { /* Slot #2 (secondary EMI) */
+			reg = <0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@2 { /* Slot #3 (secondary EMI) */
+			reg = <0x02>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@3 { /* Slot #4 (secondary EMI) */
+			reg = <0x03>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@4 { /* Slot #5 (secondary EMI) */
+			reg = <0x04>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@5 { /* Slot #6 (secondary EMI) */
+			reg = <0x05>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@6 { /* Slot #7 (secondary EMI) */
+			reg = <0x06>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mdio@7 { /* Slot #8 (secondary EMI) */
+			reg = <0x07>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&emdio1 {
+	status = "okay";
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <8>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	fpga@66 {
+		compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
+			     "simple-mfd";
+		reg = <0x66>;
+
+		mux: mux-controller {
+			compatible = "reg-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+					<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ_RTC_B -> IRQ11_B(CPLD) -> IRQ11(CPU), active low */
+				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&optee {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
new file mode 100644
index 000000000..685d4294f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC USBH2(ABCD) / USBH(3|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	status = "okay";
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
new file mode 100644
index 000000000..c6d51f116
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>,
+		    <&pinctrl_sim0_gpios>, <&pinctrl_uart24_forceoff>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+	ngpios = <32>;
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
new file mode 100644
index 000000000..40067ab8a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		/* LED_4_GREEN / MXM3_188 */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_4_RED / MXM3_178 */
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_GREEN / MXM3_152 */
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* LED_5_RED / MXM3_156 */
+		led-4 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		/* MMC1_PWR_CTRL */
+		gpio = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sata1_act>;
+		gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-name = "can2_supply";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		regulator-name = "VCC_USBH(2|4)";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+/* TODO: Audio Mixer */
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* TODO: Display Controller */
+
+/* TODO: DPU */
+
+/* Apalis ETH1 */
+&fec1 {
+	status = "okay";
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+/* TODO: GPU */
+
+/* Apalis I2C1 */
+&i2c2 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		status = "okay";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_usbh_oc_n>,
+		    <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>,
+		    <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>,
+		    <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>,
+		    <&pinctrl_qspi1a_gpios>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_uart24_forceoff>, <&pinctrl_usdhc1_gpios>;
+
+	/* PMIC MMC1 power-switch */
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19	0x00000021>; /* MXM3_148, PMIC */
+	};
+
+	/* FlexCAN PMIC */
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021>; /* MXM3_158, PMIC */
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27	0x06000061>, /* LED_4_GREEN */
+			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29	0x06000061>, /* LED_4_RED */
+			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20	0x06000061>, /* LED_5_GREEN */
+			   <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x06000061>; /* LED_5_RED */
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>;
+	};
+};
+
+/* Apalis SPI1 */
+&lpspi0 {
+	status = "okay";
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	status = "okay";
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "gpio5-00", "gpio5-01", "gpio5-02", "gpio5-03",
+			  "gpio5-04", "gpio5-05", "gpio5-06", "gpio5-07",
+			  "gpio5-08", "gpio5-09", "gpio5-10", "gpio5-11",
+			  "gpio5-12", "gpio5-13", "gpio5-14", "gpio5-15",
+			  "gpio5-16", "gpio5-17", "gpio5-18", "gpio5-19",
+			  "LED-5-GREEN", "LED-5-RED", "gpio5-22", "gpio5-23",
+			  "gpio5-24", "UART24-FORCEOFF", "gpio5-26",
+			  "LED-4-GREEN", "gpio5-28", "LED-4-RED", "gpio5-30",
+			  "gpio5-31";
+	ngpios = <32>;
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Apalis Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* Apalis USBO1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* TODO: Apalis USBH4 SuperSpeed */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>, <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
new file mode 100644
index 000000000..0878a15ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -0,0 +1,1481 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	/* Apalis BKL1 */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bkl_on>;
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */
+		/* TODO: hook-up to Apalis BKL1_PWM */
+		status = "disabled";
+	};
+
+	gpio_fan: gpio-fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio8>;
+		gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <	 0 0
+				      3000 1>;
+	};
+
+	/* TODO: LVDS Panel */
+
+	/* TODO: Shared PCIe/SATA Reference Clock */
+
+	/* TODO: PCIe Wi-Fi Reference Clock */
+
+	/*
+	 * Power management bus used to control LDO1OUT of the
+	 * second PMIC PF8100. This is used for controlling voltage levels of
+	 * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS.
+	 *
+	 * IMX_SC_R_BOARD_R1 for 3.3V
+	 * IMX_SC_R_BOARD_R2 for 1.8V
+	 * IMX_SC_R_BOARD_R3 for 2.5V
+	 * Note that for 2.5V operation the pad muxing needs to be changed,
+	 * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD.
+	 *
+	 * those power domains are mutually exclusive.
+	 */
+	reg_ext_rgmii: regulator-ext-rgmii {
+		compatible = "regulator-fixed";
+		power-domains = <&pd IMX_SC_R_BOARD_R1>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_EXT_RGMII (LDO1)";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_module_wifi: regulator-module-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pdn>;
+		gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "wifi_pwrdn_fake_regulator";
+		regulator-settling-time-us = <100>;
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio7>;
+		gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh_en>;
+		/* Apalis USBH_EN */
+		gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb-host-vbus";
+	};
+
+	reg_usb_hsic: regulator-usb-hsic {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-hsic-dummy";
+	};
+
+	reg_usb_phy: regulator-usb-hsic1 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "usb-phy-dummy";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_boot: encoder1-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		encoder2_boot: encoder2-boot@86200000 {
+			reg = <0 0x86200000 0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * reserved-memory layout
+		 * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4
+		 * Shouldn't be used at A core and Linux side.
+		 *
+		 */
+		m4_reserved: m4@88000000 {
+			reg = <0 0x88000000 0 0x8000000>;
+			no-map;
+		};
+
+		rpmsg_reserved: rpmsg@90200000 {
+			reg = <0 0x90200000 0 0x200000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x90400000 0 0x100000>;
+			no-map;
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x200000>;
+			no-map;
+		};
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder1_rpc: encoder1-rpc@94400000 {
+			reg = <0 0x94400000 0 0x700000>;
+			no-map;
+		};
+
+		encoder2_rpc: encoder2-rpc@94b00000 {
+			reg = <0 0x94b00000 0 0x700000>;
+			no-map;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0xc0000000 0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+			size = <0 0x3c000000>;
+		};
+	};
+
+	/* TODO: Apalis Analogue Audio */
+
+	/* TODO: HDMI Audio */
+
+	/* TODO: Apalis SPDIF1 */
+
+	touchscreen: touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle", "default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>;
+		io-channels = <&adc1 2>, <&adc1 1>,
+			      <&adc1 0>, <&adc1 3>;
+		vf50-ts-min-pressure = <200>;
+		xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>;
+		/*
+		 * NOTE: you must remove the pinctrl-adc1 from the adc1
+		 * node below to use the touchscreen
+		 */
+		status = "disabled";
+	};
+
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0>;
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+};
+
+/* TODO: Asynchronous Sample Rate Converter (ASRC) */
+
+/* Apalis ETH1 */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+			interrupt-parent = <&lsio_gpio1>;
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reset-assert-us = <2>;
+			reset-deassert-us = <2>;
+			reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>;
+			reset-names = "phy-reset";
+		};
+	};
+};
+
+/* Apalis CAN1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* Apalis CAN2 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* Apalis CAN3 (optional) */
+&flexcan3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan3>;
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* On-module I2C */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* TODO: Audio Codec */
+
+	/* USB3503A */
+	usb-hub@8 {
+		compatible = "smsc,usb3503a";
+		reg = <0x08>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503a>;
+		connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+		intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
+		refclk-frequency = <25000000>;
+		reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* Apalis I2C1 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&lsio_gpio4>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;		/* Apalis GPIO5 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>;
+		reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>;	/* Apalis GPIO6 */
+		status = "disabled";
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* Apalis I2C3 (CAM) */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO: Apalis LVDS1 */
+
+/* Apalis SPI1 */
+&lpspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis SPI2 */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+/* Apalis UART3 */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Apalis UART1 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+};
+
+/* Apalis UART4 */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Apalis UART2 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+
+	hdmi-ctrl-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_ctrl>;
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_HIGH>;
+		line-name = "CONNECTOR_IS_HDMI";
+		/* Set signals depending on HDP device type, 0 DP, 1 HDMI */
+		output-high;
+	};
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+
+	/*
+	 * Add GPIO2_20 as a wakeup source:
+	 * Pin:  101	SC_P_SPI3_CS0 (MXM3_37/WAKE1_MICO)
+	 * Type: 5	SC_PAD_WAKEUP_FALL_EDGE
+	 * Line: 20
+	 */
+	pad-wakeup = <IMX8QM_SPI3_CS0 5 20>;
+	pad-wakeup-num = <1>;
+
+	pcie-wifi-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_wifi_refclk>;
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		line-name = "PCIE_WIFI_CLK";
+		output-high;
+	};
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+
+	/* Enable pcie root / sata ref clock unconditionally */
+	pcie-sata-hog {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_sata_refclk>;
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		line-name = "PCIE_SATA_CLK";
+		output-high;
+	};
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+/* Apalis PWM3, MXM3 pin 6 */
+&lsio_pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM4, MXM3 pin 8 */
+&lsio_pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM1, MXM3 pin 2 */
+&lsio_pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <3>;
+};
+
+/* Apalis PWM2, MXM3 pin 4 */
+&lsio_pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	#pwm-cells = <3>;
+};
+
+/* Messaging Units */
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&mu2_m0 {
+	status = "okay";
+};
+
+/* TODO: Apalis PCIE1 */
+
+/* TODO: On-module Wi-Fi */
+
+/* TODO: Apalis BKL1_PWM */
+
+/* TODO: Apalis DAP1 */
+
+/* TODO: Analogue Audio */
+
+/* TODO: Apalis SATA1 */
+
+/* TODO: Apalis SPDIF1 */
+
+/* TODO: Thermal Zones */
+
+/* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */
+
+/* TODO: Apalis USBH4 */
+
+/* Apalis USBO1 */
+&usbphy1 {
+	phy-3p0-supply = <&reg_usb_phy>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	adp-disable;
+	hnp-disable;
+	over-current-active-low;
+	power-active-high;
+	srp-disable;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* Apalis MMC1 */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2_4bit>,
+		    <&pinctrl_usdhc2_8bit>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>,
+		    <&pinctrl_usdhc2_8bit_100mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>,
+		    <&pinctrl_usdhc2_8bit_200mhz>,
+		    <&pinctrl_mmc1_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>,
+		    <&pinctrl_usdhc2_8bit_sleep>,
+		    <&pinctrl_mmc1_cd_sleep>;
+	bus-width = <8>;
+	cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */
+	no-1-8-v;
+};
+
+/* Video Processing Unit */
+&vpu {
+	compatible = "nxp,imx8qm-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	reg = <0x2d080000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	reg = <0x2d090000 0x10000>;
+	memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+	status = "okay";
+};
+
+&vpu_core2 {
+	reg = <0x2d0a0000 0x10000>;
+	memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>,
+		    <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>,
+		    <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>,
+		    <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>,
+		    <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>,
+		    <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>,
+		    <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>,
+		    <&pinctrl_usdhc1_gpios>;
+
+	/* Apalis AN1_ADC */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = /* Apalis AN1_ADC0 */
+			   <IMX8QM_ADC_IN0_DMA_ADC0_IN0				0xc0000060>,
+			   /* Apalis AN1_ADC1 */
+			   <IMX8QM_ADC_IN1_DMA_ADC0_IN1				0xc0000060>,
+			   /* Apalis AN1_ADC2 */
+			   <IMX8QM_ADC_IN2_DMA_ADC0_IN2				0xc0000060>,
+			   /* Apalis AN1_TSWIP_ADC3 */
+			   <IMX8QM_ADC_IN3_DMA_ADC0_IN3				0xc0000060>;
+	};
+
+	/* Apalis AN1_TS */
+	pinctrl_adc1: adc1grp {
+		fsl,pins = /* Apalis AN1_TSPX */
+			   <IMX8QM_ADC_IN4_DMA_ADC1_IN0				0xc0000060>,
+			   /* Apalis AN1_TSMX */
+			   <IMX8QM_ADC_IN5_DMA_ADC1_IN1				0xc0000060>,
+			   /* Apalis AN1_TSPY */
+			   <IMX8QM_ADC_IN6_DMA_ADC1_IN2				0xc0000060>,
+			   /* Apalis AN1_TSMY */
+			   <IMX8QM_ADC_IN7_DMA_ADC1_IN3				0xc0000060>;
+	};
+
+	/* Apalis CAM1 */
+	pinctrl_cam1_gpios: cam1gpiosgrp {
+		fsl,pins = /* Apalis CAM1_D7 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20		0x00000021>,
+			   /* Apalis CAM1_D6 */
+			   <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21		0x00000021>,
+			   /* Apalis CAM1_D5 */
+			   <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26			0x00000021>,
+			   /* Apalis CAM1_D4 */
+			   <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27			0x00000021>,
+			   /* Apalis CAM1_D3 */
+			   <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28		0x00000021>,
+			   /* Apalis CAM1_D2 */
+			   <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29		0x00000021>,
+			   /* Apalis CAM1_D1 */
+			   <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30		0x00000021>,
+			   /* Apalis CAM1_D0 */
+			   <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31		0x00000021>,
+			   /* Apalis CAM1_PCLK */
+			   <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00			0x00000021>,
+			   /* Apalis CAM1_MCLK */
+			   <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18			0x00000021>,
+			   /* Apalis CAM1_VSYNC */
+			   <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24			0x00000021>,
+			   /* Apalis CAM1_HSYNC */
+			   <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25			0x00000021>;
+	};
+
+	/* Apalis DAP1 */
+	pinctrl_dap1_gpios: dap1gpiosgrp {
+		fsl,pins = /* Apalis DAP1_MCLK */
+			   <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19			0x00000021>,
+			   /* Apalis DAP1_D_OUT */
+			   <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12			0x00000021>,
+			   /* Apalis DAP1_RESET */
+			   <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07			0x00000021>,
+			   /* Apalis DAP1_BIT_CLK */
+			   <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06			0x00000021>,
+			   /* Apalis DAP1_D_IN */
+			   <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14			0x00000021>,
+			   /* Apalis DAP1_SYNC */
+			   <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11			0x00000021>,
+			   /* On-module Wi-Fi_I2S_EN# */
+			   <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13		0x00000021>;
+	};
+
+	/* Apalis LCD1_G1+2 */
+	pinctrl_esai0_gpios: esai0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G1 */
+			   <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22			0x00000021>,
+			   /* Apalis LCD1_G2 */
+			   <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23			0x00000021>;
+	};
+
+	/* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = /* Use pads in 3.3V mode */
+			   <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+			   <IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+			   <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020>,
+			   <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+			   /* On-module ETH_RESET# */
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+			   /* On-module ETH_INT# */
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29			0x04000060>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD		0x000014a0>,
+			   <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14			0x04000040>,
+			   <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13			0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08		0x04000040>,
+			   <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09		0x04000040>,
+			   <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15	0x04000040>,
+			   <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11			0x06000020>,
+			   <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29		0x04000040>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_fec2_gpios: fec2gpiosgrp {
+		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0>,
+			   /* Apalis LCD1_R1 */
+			   <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18			0x00000021>,
+			   /* Apalis LCD1_R0 */
+			   <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17			0x00000021>,
+			   /* Apalis LCD1_G0 */
+			   <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16	0x00000021>,
+			   /* Apalis LCD1_R7 */
+			   <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17		0x00000021>,
+			   /* Apalis LCD1_DE */
+			   <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18		0x00000021>,
+			   /* Apalis LCD1_HSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19		0x00000021>,
+			   /* Apalis LCD1_VSYNC */
+			   <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20		0x00000021>,
+			   /* Apalis LCD1_PCLK */
+			   <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21		0x00000021>,
+			   /* Apalis LCD1_R6 */
+			   <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11		0x00000021>,
+			   /* Apalis LCD1_R5 */
+			   <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10		0x00000021>,
+			   /* Apalis LCD1_R4 */
+			   <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12		0x00000021>,
+			   /* Apalis LCD1_R3 */
+			   <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13		0x00000021>,
+			   /* Apalis LCD1_R2 */
+			   <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14		0x00000021>;
+	};
+
+	/* Apalis CAN1 */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX			0x00000021>;
+	};
+
+	/* Apalis CAN2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX			0x00000021>;
+	};
+
+	/* Apalis CAN3 (optional) */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX			0x00000021>,
+			   <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX			0x00000021>;
+	};
+
+	/* Apalis GPIO1 */
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08			0x06000021>;
+	};
+
+	/* Apalis GPIO2 */
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09			0x06000021>;
+	};
+
+	/* Apalis GPIO3 */
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12			0x06000021>;
+	};
+
+	/* Apalis GPIO4 */
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13			0x06000021>;
+	};
+
+	/* Apalis GPIO5 */
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01			0x06000021>;
+	};
+
+	/* Apalis GPIO6 */
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02			0x00000021>;
+	};
+
+	/* Apalis GPIO7 */
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26			0x00000021>;
+	};
+
+	/* Apalis GPIO8 */
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28			0x00000021>;
+	};
+
+	/* Apalis BKL1_ON */
+	pinctrl_gpio_bkl_on: gpiobklongrp {
+		fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04			0x00000021>;
+	};
+
+	/* Apalis WAKE1_MICO */
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20			0x06700021>;
+	};
+
+	/* Apalis USBH_OC# */
+	pinctrl_gpio_usbh_oc_n: gpiousbhocngrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06			0x04000021>;
+	};
+
+	/* On-module HDMI_CTRL */
+	pinctrl_hdmi_ctrl: hdmictrlgrp {
+		fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30		0x00000061>;
+	};
+
+	/* On-module I2C */
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL			0x04000020>,
+			   <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C1 */
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL			0x04000020>,
+			   <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA			0x04000020>;
+	};
+
+	/* Apalis I2C3 (CAM) */
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL				0x04000020>,
+			   <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA			0x04000020>;
+	};
+
+	/* Apalis SPI1 */
+	pinctrl_lpspi0: lpspi0grp {
+		fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK			0x0600004c>,
+			   <IMX8QM_SPI0_SDO_DMA_SPI0_SDO			0x0600004c>,
+			   <IMX8QM_SPI0_SDI_DMA_SPI0_SDI			0x0600004c>,
+			   <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05			0x0600004c>;
+	};
+
+	/* Apalis SPI2 */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK			0x0600004c>,
+			   <IMX8QM_SPI2_SDO_DMA_SPI2_SDO			0x0600004c>,
+			   <IMX8QM_SPI2_SDI_DMA_SPI2_SDI			0x0600004c>,
+			   <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10			0x0600004c>;
+	};
+
+	/* Apalis UART3 */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX			0x06000020>,
+			   <IMX8QM_UART0_TX_DMA_UART0_TX			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX			0x06000020>,
+			   <IMX8QM_UART1_TX_DMA_UART1_TX			0x06000020>,
+			   <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B			0x06000020>,
+			   <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B			0x06000020>;
+	};
+
+	/* Apalis UART1 */
+	pinctrl_lpuart1ctrl: lpuart1ctrlgrp {
+		fsl,pins = /* Apalis UART1_DTR */
+			   <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06			0x00000021>,
+			   /* Apalis UART1_DSR */
+			   <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07			0x00000021>,
+			   /* Apalis UART1_DCD */
+			   <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10			0x00000021>,
+			   /* Apalis UART1_RI */
+			   <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11			0x00000021>;
+	};
+
+	/* Apalis UART4 */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX			0x06000020>,
+			   <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX			0x06000020>;
+	};
+
+	/* Apalis UART2 */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX			0x06000020>,
+			   <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX			0x06000020>,
+			   <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B		0x06000020>,
+			   <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B		0x06000020>;
+	};
+
+	/* Apalis TS_2 */
+	pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06		0x00000021>;
+	};
+
+	/* Apalis LCD1_G6+7 */
+	pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G6 */
+			   <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12		0x00000021>,
+			   /* Apalis LCD1_G7 */
+			   <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x00000021>;
+	};
+
+	/* Apalis TS_3 */
+	pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp {
+		fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07		0x00000021>;
+	};
+
+	/* Apalis TS_4 */
+	pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp {
+		fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22		0x00000021>;
+	};
+
+	/* Apalis TS_1 */
+	pinctrl_mlb_gpios: mlbgpiosgrp {
+		fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27			0x00000021>;
+	};
+
+	/* Apalis MMC1_CD# */
+	pinctrl_mmc1_cd: mmc1cdgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x00000021>;
+	};
+
+	pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09			0x04000021>;
+	};
+
+	/* On-module PCIe_Wi-Fi */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x00000021>,
+			   <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN1 */
+	pinctrl_pcie_sata_refclk: pciesatarefclkgrp {
+		fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11			0x00000021>;
+	};
+
+	/* On-module PCIe_CLK_EN2 */
+	pinctrl_pcie_wifi_refclk: pciewifirefclkgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11		0x00000021>;
+	};
+
+	/* Apalis PWM3 */
+	pinctrl_pwm0: pwm0grp {
+		fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM4 */
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM1 */
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT			0x00000020>;
+	};
+
+	/* Apalis PWM2 */
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT			0x00000020>;
+	};
+
+	/* Apalis BKL1_PWM */
+	pinctrl_pwm_bkl: pwmbklgrp {
+		fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT			0x00000020>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_qspi1a_gpios: qspi1agpiosgrp {
+		fsl,pins = /* Apalis LCD1_B0 */
+			   <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26			0x00000021>,
+			   /* Apalis LCD1_B1 */
+			   <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x00000021>,
+			   /* Apalis LCD1_B2 */
+			   <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24			0x00000021>,
+			   /* Apalis LCD1_B3 */
+			   <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23			0x00000021>,
+			   /* Apalis LCD1_B5 */
+			   <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22			0x00000021>,
+			   /* Apalis LCD1_B7 */
+			   <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21			0x00000021>,
+			   /* Apalis LCD1_B4 */
+			   <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19			0x00000021>,
+			   /* Apalis LCD1_B6 */
+			   <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20			0x00000021>;
+	};
+
+	/* On-module RESET_MOCI#_DRV */
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 for Apalis Analogue Audio */
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD			0xc600006c>,
+			   <IMX8QM_SAI1_RXD_AUD_SAI1_RXD			0xc600004c>,
+			   <IMX8QM_SAI1_TXC_AUD_SAI1_TXC			0xc600004c>,
+			   <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS			0xc600004c>;
+	};
+
+	/* Apalis SATA1_ACT# */
+	pinctrl_sata1_act: sata1actgrp {
+		fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08			0x00000021>;
+	};
+
+	/* Apalis SD1_CD# */
+	pinctrl_sd1_cd: sd1cdgrp {
+		fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12			0x00000021>;
+	};
+
+	/* On-module I2S SGTL5000 SYS_MCLK */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0			0xc600004c>;
+	};
+
+	/* Apalis LCD1_ */
+	pinctrl_sim0_gpios: sim0gpiosgrp {
+		fsl,pins = /* Apalis LCD1_G5 */
+			   <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00			0x00000021>,
+			   /* Apalis LCD1_G3 */
+			   <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05		0x00000021>,
+			   /* Apalis TS_5 */
+			   <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02			0x00000021>,
+			   /* Apalis LCD1_G4 */
+			   <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01			0x00000021>;
+	};
+
+	/* Apalis SPDIF */
+	pinctrl_spdif0: spdif0grp {
+		fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX			0xc6000040>,
+			   <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX			0xc6000040>;
+	};
+
+	pinctrl_touchctrl_gpios: touchctrlgpiosgrp {
+		fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04			0x00000021>,
+			   <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05			0x00000041>,
+			   <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17			0x00000021>,
+			   <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21			0x00000041>;
+	};
+
+	pinctrl_touchctrl_idle: touchctrlidlegrp {
+		fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22			0x00000021>,
+			   <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23			0x00000021>,
+			   <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24			0x00000021>,
+			   <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25			0x00000021>;
+	};
+
+	/* On-module USB HSIC HUB (active) */
+	pinctrl_usb_hsic_active: usbh1activegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000ff>;
+	};
+
+	/* On-module USB HSIC HUB (idle) */
+	pinctrl_usb_hsic_idle: usbh1idlegrp {
+		fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA		0x000000cf>,
+			   <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE	0x000000cf>;
+	};
+
+	/* On-module USB HSIC HUB */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = /* On-module HSIC_HUB_CONNECT */
+			   <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x00000041>,
+			   /* On-module HSIC_INT_N */
+			   <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01			0x00000021>,
+			   /* On-module HSIC_RESET_N */
+			   <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02			0x00000041>;
+	};
+
+	/* Apalis USBH_EN */
+	pinctrl_usbh_en: usbhengrp {
+		fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04			0x00000021>;
+	};
+
+	/* Apalis USBO1 */
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = /* Apalis USBO1_EN */
+			   <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021>,
+			   /* Apalis USBO1_OC# */
+			   <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC			0x04000021>;
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000041>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000021>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK			0x06000040>,
+			   <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD			0x00000020>,
+			   <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000020>,
+			   <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000020>,
+			   <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000020>,
+			   <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000020>,
+			   <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000020>,
+			   <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000020>,
+			   <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000020>,
+			   <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000020>,
+			   <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE		0x06000040>,
+			   <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x00000020>;
+	};
+
+	/* Apalis TS_6 */
+	pinctrl_usdhc1_gpios: usdhc1gpiosgrp {
+		fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23		0x00000021>;
+	};
+
+	/* Apalis MMC1 */
+	pinctrl_usdhc2_4bit: usdhc2grp4bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000021>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000021>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000021>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000040>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000020>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x00000020>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x00000020>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x00000020>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x00000020>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit: usdhc2grp8bitgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000021>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000021>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000021>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x00000020>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x00000020>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x00000020>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x00000020>;
+	};
+
+	pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x04000061>,
+			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x04000061>,
+			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0		0x04000061>,
+			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1		0x04000061>,
+			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2		0x04000061>,
+			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3		0x04000061>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp {
+		fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4		0x04000061>,
+			   <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5		0x04000061>,
+			   <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6		0x04000061>,
+			   <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7		0x04000061>;
+	};
+
+	/* Apalis SD1 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK			0x06000041>,
+			   <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD			0x00000021>,
+			   <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0		0x00000021>,
+			   <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1		0x00000021>,
+			   <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2		0x00000021>,
+			   <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3		0x00000021>,
+			   /* On-module PMIC use */
+			   <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT		0x00000021>;
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_wifi: wifigrp {
+		fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */
+			   <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x06000021>,
+			   /* On-module Wi-Fi_PCIE_W_DISABLE */
+			   <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24		0x06000021>;
+	};
+
+	pinctrl_wifi_pdn: wifipdngrp {
+		fsl,pins = /* On-module Wi-Fi_POWER_DOWN */
+			   <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28		0x06000021>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
new file mode 100644
index 000000000..9386d1a59
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include "imx8-ss-audio.dtsi"
+#include "imx8-ss-dma.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
new file mode 100644
index 000000000..6c8d75ef9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+audio_subsys: bus@59000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x59000000 0x0 0x59000000 0x1000000>;
+
+	audio_ipg_clk: clock-audio-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "audio_ipg_clk";
+	};
+
+	dsp_lpcg: clock-controller@59580000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59580000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>,
+			 <&audio_ipg_clk>,
+			 <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_7>;
+		clock-output-names = "dsp_lpcg_adb_clk",
+				     "dsp_lpcg_ipg_clk",
+				     "dsp_lpcg_core_clk";
+		power-domains = <&pd IMX_SC_R_DSP>;
+	};
+
+	dsp_ram_lpcg: clock-controller@59590000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x59590000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&audio_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_4>;
+		clock-output-names = "dsp_ram_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_DSP_RAM>;
+	};
+
+	dsp: dsp@596e8000 {
+		compatible = "fsl,imx8qxp-dsp";
+		reg = <0x596e8000 0x88000>;
+		clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
+			 <&dsp_ram_lpcg IMX_LPCG_CLK_4>,
+			 <&dsp_lpcg IMX_LPCG_CLK_7>;
+		clock-names = "ipg", "ocram", "core";
+		power-domains = <&pd IMX_SC_R_MU_13A>,
+			<&pd IMX_SC_R_MU_13B>,
+			<&pd IMX_SC_R_DSP>,
+			<&pd IMX_SC_R_DSP_RAM>;
+		mbox-names = "txdb0", "txdb1",
+			"rxdb0", "rxdb1";
+		mboxes = <&lsio_mu13 2 0>,
+			<&lsio_mu13 2 1>,
+			<&lsio_mu13 3 0>,
+			<&lsio_mu13 3 1>;
+		memory-region = <&dsp_reserved>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
new file mode 100644
index 000000000..fc1a5d343
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+conn_subsys: bus@5b000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
+
+	conn_axi_clk: clock-conn-axi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333333333>;
+		clock-output-names = "conn_axi_clk";
+	};
+
+	conn_ahb_clk: clock-conn-ahb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <166666666>;
+		clock-output-names = "conn_ahb_clk";
+	};
+
+	conn_ipg_clk: clock-conn-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <83333333>;
+		clock-output-names = "conn_ipg_clk";
+	};
+
+	usbotg1: usb@5b0d0000 {
+		compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb";
+		reg = <0x5b0d0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy1>;
+		fsl,usbmisc = <&usbmisc1 0>;
+		clocks = <&usb2_lpcg 0>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_0>;
+		status = "disabled";
+	};
+
+	usbmisc1: usbmisc@5b0d0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0d0200 0x200>;
+	};
+
+	usbphy1: usbphy@5b100000 {
+		compatible = "fsl,imx7ulp-usbphy";
+		reg = <0x5b100000 0x1000>;
+		clocks = <&usb2_lpcg 1>;
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+		status = "disabled";
+	};
+
+	usdhc1: mmc@5b010000 {
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b010000 0x10000>;
+		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+		status = "disabled";
+	};
+
+	usdhc2: mmc@5b020000 {
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b020000 0x10000>;
+		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+		fsl,tuning-start-tap = <20>;
+		fsl,tuning-step = <2>;
+		status = "disabled";
+	};
+
+	usdhc3: mmc@5b030000 {
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x5b030000 0x10000>;
+		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+		status = "disabled";
+	};
+
+	fec1: ethernet@5b040000 {
+		reg = <0x5b040000 0x10000>;
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&enet0_lpcg IMX_LPCG_CLK_4>,
+			 <&enet0_lpcg IMX_LPCG_CLK_2>,
+			 <&enet0_lpcg IMX_LPCG_CLK_3>,
+			 <&enet0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+		status = "disabled";
+	};
+
+	fec2: ethernet@5b050000 {
+		reg = <0x5b050000 0x10000>;
+		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&enet1_lpcg IMX_LPCG_CLK_4>,
+			 <&enet1_lpcg IMX_LPCG_CLK_2>,
+			 <&enet1_lpcg IMX_LPCG_CLK_3>,
+			 <&enet1_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+				  <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
+		assigned-clock-rates = <250000000>, <125000000>;
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg3: usb@5b110000 {
+		compatible = "fsl,imx8qm-usb3";
+		reg = <0x5b110000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_1>,
+			 <&usb3_lpcg IMX_LPCG_CLK_0>,
+			 <&usb3_lpcg IMX_LPCG_CLK_7>,
+			 <&usb3_lpcg IMX_LPCG_CLK_4>,
+			 <&usb3_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "lpm", "bus", "aclk", "ipg", "core";
+		assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		assigned-clock-rates = <250000000>;
+		power-domains = <&pd IMX_SC_R_USB_2>;
+		status = "disabled";
+
+		usbotg3_cdns3: usb@5b120000 {
+			compatible = "cdns,usb3";
+			reg = <0x5b120000 0x10000>,   /* memory area for OTG/DRD registers */
+			      <0x5b130000 0x10000>,   /* memory area for HOST registers */
+			      <0x5b140000 0x10000>;   /* memory area for DEVICE registers */
+			reg-names = "otg", "xhci", "dev";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg", "wakeup";
+			phys = <&usb3_phy>;
+			phy-names = "cdns3,usb3-phy";
+			cdns,on-chip-buff-size = /bits/ 16 <18>;
+			status = "disabled";
+		};
+	};
+
+	usb3_phy: usb-phy@5b160000 {
+		compatible = "nxp,salvo-phy";
+		reg = <0x5b160000 0x40000>;
+		clocks = <&usb3_lpcg IMX_LPCG_CLK_6>;
+		clock-names = "salvo_phy_clk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	/* LPCG clocks */
+	sdhc0_lpcg: clock-controller@5b200000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b200000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc0_lpcg_per_clk",
+				     "sdhc0_lpcg_ipg_clk",
+				     "sdhc0_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+	};
+
+	sdhc1_lpcg: clock-controller@5b210000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b210000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc1_lpcg_per_clk",
+				     "sdhc1_lpcg_ipg_clk",
+				     "sdhc1_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+	};
+
+	sdhc2_lpcg: clock-controller@5b220000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b220000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
+				<IMX_LPCG_CLK_5>;
+		clock-output-names = "sdhc2_lpcg_per_clk",
+				     "sdhc2_lpcg_ipg_clk",
+				     "sdhc2_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+	};
+
+	enet0_lpcg: clock-controller@5b230000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b230000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "enet0_lpcg_timer_clk",
+				     "enet0_lpcg_txc_sampling_clk",
+				     "enet0_lpcg_ahb_clk",
+				     "enet0_lpcg_rgmii_txc_clk",
+				     "enet0_lpcg_ipg_clk",
+				     "enet0_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+	};
+
+	enet1_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "enet1_lpcg_timer_clk",
+				     "enet1_lpcg_txc_sampling_clk",
+				     "enet1_lpcg_ahb_clk",
+				     "enet1_lpcg_rgmii_txc_clk",
+				     "enet1_lpcg_ipg_clk",
+				     "enet1_lpcg_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_lpcg: clock-controller@5b270000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b270000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_ahb_clk>, <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
+	};
+
+	usb3_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>;
+		clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&conn_ipg_clk>,
+			 <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>;
+		clock-output-names = "usb3_app_clk",
+				     "usb3_lpm_clk",
+				     "usb3_ipg_clk",
+				     "usb3_core_pclk",
+				     "usb3_phy_clk",
+				     "usb3_aclk";
+		power-domains = <&pd IMX_SC_R_USB_2_PHY>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
new file mode 100644
index 000000000..7d5183c6c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+ddr_subsys: bus@5c000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
+
+	ddr_pmu0: ddr-pmu@5c020000 {
+		compatible = "fsl,imx8-ddr-pmu";
+		reg = <0x5c020000 0x10000>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
new file mode 100644
index 000000000..adb98a72b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+dma_subsys: bus@5a000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5a000000 0x0 0x5a000000 0x1000000>;
+
+	dma_ipg_clk: clock-dma-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <120000000>;
+		clock-output-names = "dma_ipg_clk";
+	};
+
+	lpspi0: spi@5a000000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a000000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi0_lpcg 0>,
+			 <&spi0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+		status = "disabled";
+	};
+
+	lpspi1: spi@5a010000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a010000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi1_lpcg 0>,
+			 <&spi1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+		status = "disabled";
+	};
+
+	lpspi2: spi@5a020000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a020000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi2_lpcg 0>,
+			 <&spi2_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+		status = "disabled";
+	};
+
+	lpspi3: spi@5a030000 {
+		compatible = "fsl,imx7ulp-spi";
+		reg = <0x5a030000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&spi3_lpcg 0>,
+			 <&spi3_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <60000000>;
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+		status = "disabled";
+	};
+
+	lpuart0: serial@5a060000 {
+		reg = <0x5a060000 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart0_lpcg IMX_LPCG_CLK_4>,
+			 <&uart0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_0>;
+		status = "disabled";
+	};
+
+	lpuart1: serial@5a070000 {
+		reg = <0x5a070000 0x1000>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart1_lpcg IMX_LPCG_CLK_4>,
+			 <&uart1_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_1>;
+		status = "disabled";
+	};
+
+	lpuart2: serial@5a080000 {
+		reg = <0x5a080000 0x1000>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart2_lpcg IMX_LPCG_CLK_4>,
+			 <&uart2_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_2>;
+		status = "disabled";
+	};
+
+	lpuart3: serial@5a090000 {
+		reg = <0x5a090000 0x1000>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&uart3_lpcg IMX_LPCG_CLK_4>,
+			 <&uart3_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "baud";
+		assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <80000000>;
+		power-domains = <&pd IMX_SC_R_UART_3>;
+		status = "disabled";
+	};
+
+	spi0_lpcg: clock-controller@5a400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi0_lpcg_clk",
+				     "spi0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_0>;
+	};
+
+	spi1_lpcg: clock-controller@5a410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi1_lpcg_clk",
+				     "spi1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_1>;
+	};
+
+	spi2_lpcg: clock-controller@5a420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi2_lpcg_clk",
+				     "spi2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_2>;
+	};
+
+	spi3_lpcg: clock-controller@5a430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "spi3_lpcg_clk",
+				     "spi3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_SPI_3>;
+	};
+
+	uart0_lpcg: clock-controller@5a460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart0_lpcg_baud_clk",
+				     "uart0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_0>;
+	};
+
+	uart1_lpcg: clock-controller@5a470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart1_lpcg_baud_clk",
+				     "uart1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_1>;
+	};
+
+	uart2_lpcg: clock-controller@5a480000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a480000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart2_lpcg_baud_clk",
+				     "uart2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_2>;
+	};
+
+	uart3_lpcg: clock-controller@5a490000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a490000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart3_lpcg_baud_clk",
+				     "uart3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_3>;
+	};
+
+	i2c0: i2c@5a800000 {
+		reg = <0x5a800000 0x4000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c0_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c0_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@5a810000 {
+		reg = <0x5a810000 0x4000>;
+		interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c1_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c1_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@5a820000 {
+		reg = <0x5a820000 0x4000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c2_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c2_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@5a830000 {
+		reg = <0x5a830000 0x4000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&i2c3_lpcg IMX_LPCG_CLK_0>,
+			 <&i2c3_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+		status = "disabled";
+	};
+
+	adc0: adc@5a880000 {
+		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
+		reg = <0x5a880000 0x10000>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc0_lpcg 0>,
+			 <&adc0_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+		status = "disabled";
+	 };
+
+	adc1: adc@5a890000 {
+		compatible = "nxp,imx8qxp-adc";
+		#io-channel-cells = <1>;
+		reg = <0x5a890000 0x10000>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&adc1_lpcg 0>,
+			 <&adc1_lpcg 1>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+		status = "disabled";
+	};
+
+	flexcan1: can@5a8d0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8d0000 0x10000>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <0>;
+		status = "disabled";
+	};
+
+	flexcan2: can@5a8e0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8e0000 0x10000>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <1>;
+		status = "disabled";
+	};
+
+	flexcan3: can@5a8f0000 {
+		compatible = "fsl,imx8qm-flexcan";
+		reg = <0x5a8f0000 0x10000>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		/* CAN0 clock and PD is shared among all CAN instances as
+		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
+		 * has to be powered on.
+		 */
+		clocks = <&can0_lpcg 1>,
+			 <&can0_lpcg 0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <40000000>;
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+		/* SLSlice[4] */
+		fsl,clk-source = /bits/ 8 <0>;
+		fsl,scu-index = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	i2c0_lpcg: clock-controller@5ac00000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac00000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c0_lpcg_clk",
+				     "i2c0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_0>;
+	};
+
+	i2c1_lpcg: clock-controller@5ac10000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac10000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c1_lpcg_clk",
+				     "i2c1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_1>;
+	};
+
+	i2c2_lpcg: clock-controller@5ac20000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac20000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c2_lpcg_clk",
+				     "i2c2_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_2>;
+	};
+
+	i2c3_lpcg: clock-controller@5ac30000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac30000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_I2C_3 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "i2c3_lpcg_clk",
+				     "i2c3_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_I2C_3>;
+	};
+
+	adc0_lpcg: clock-controller@5ac80000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac80000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc0_lpcg_clk",
+				     "adc0_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_0>;
+	};
+
+	adc1_lpcg: clock-controller@5ac90000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ac90000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "adc1_lpcg_clk",
+				     "adc1_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_ADC_1>;
+	};
+
+	can0_lpcg: clock-controller@5acd0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acd0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can0_lpcg_pe_clk",
+				     "can0_lpcg_ipg_clk",
+				     "can0_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
new file mode 100644
index 000000000..a90654155
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ * Zhou Guoniu <guoniu.zhou@nxp.com>
+ */
+img_subsys: bus@58000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+	img_ipg_clk: clock-img-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "img_ipg_clk";
+	};
+
+	jpegdec: jpegdec@58400000 {
+		reg = <0x58400000 0x00050000>;
+		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <200000000>, <200000000>;
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+				<&pd IMX_SC_R_MJPEG_DEC_S0>,
+				<&pd IMX_SC_R_MJPEG_DEC_S1>,
+				<&pd IMX_SC_R_MJPEG_DEC_S2>,
+				<&pd IMX_SC_R_MJPEG_DEC_S3>;
+	};
+
+	jpegenc: jpegenc@58450000 {
+		reg = <0x58450000 0x00050000>;
+		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <200000000>, <200000000>;
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+				<&pd IMX_SC_R_MJPEG_ENC_S0>,
+				<&pd IMX_SC_R_MJPEG_ENC_S1>,
+				<&pd IMX_SC_R_MJPEG_ENC_S2>,
+				<&pd IMX_SC_R_MJPEG_ENC_S3>;
+	};
+
+	img_jpeg_dec_lpcg: clock-controller@585d0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585d0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_dec_lpcg_clk",
+				     "img_jpeg_dec_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
+	};
+
+	img_jpeg_enc_lpcg: clock-controller@585f0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585f0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_enc_lpcg_clk",
+				     "img_jpeg_enc_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
new file mode 100644
index 000000000..133f2b1ce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+lsio_subsys: bus@5d000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x5d000000 0x0 0x5d000000 0x1000000>,
+		 <0x08000000 0x0 0x08000000 0x10000000>;
+
+	lsio_mem_clk: clock-lsio-mem {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "lsio_mem_clk";
+	};
+
+	lsio_bus_clk: clock-lsio-bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "lsio_bus_clk";
+	};
+
+	lsio_pwm0: pwm@5d000000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d000000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm0_lpcg 4>,
+			 <&pwm0_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm1: pwm@5d010000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d010000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm1_lpcg 4>,
+			 <&pwm1_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm2: pwm@5d020000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d020000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm2_lpcg 4>,
+			 <&pwm2_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_pwm3: pwm@5d030000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d030000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm3_lpcg 4>,
+			 <&pwm3_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <3>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	lsio_gpio0: gpio@5d080000 {
+		reg = <0x5d080000 0x10000>;
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_0>;
+	};
+
+	lsio_gpio1: gpio@5d090000 {
+		reg = <0x5d090000 0x10000>;
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_1>;
+	};
+
+	lsio_gpio2: gpio@5d0a0000 {
+		reg = <0x5d0a0000 0x10000>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_2>;
+	};
+
+	lsio_gpio3: gpio@5d0b0000 {
+		reg = <0x5d0b0000 0x10000>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_3>;
+	};
+
+	lsio_gpio4: gpio@5d0c0000 {
+		reg = <0x5d0c0000 0x10000>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_4>;
+	};
+
+	lsio_gpio5: gpio@5d0d0000 {
+		reg = <0x5d0d0000 0x10000>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_5>;
+	};
+
+	lsio_gpio6: gpio@5d0e0000 {
+		reg = <0x5d0e0000 0x10000>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_6>;
+	};
+
+	lsio_gpio7: gpio@5d0f0000 {
+		reg = <0x5d0f0000 0x10000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		power-domains = <&pd IMX_SC_R_GPIO_7>;
+	};
+
+	flexspi0: spi@5d120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,imx8qxp-fspi";
+		reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
+		reg-names = "fspi_base", "fspi_mmap";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
+		clock-names = "fspi_en", "fspi";
+		power-domains = <&pd IMX_SC_R_FSPI_0>;
+		status = "disabled";
+	};
+
+	lsio_mu0: mailbox@5d1b0000 {
+		reg = <0x5d1b0000 0x10000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu1: mailbox@5d1c0000 {
+		reg = <0x5d1c0000 0x10000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+	};
+
+	lsio_mu2: mailbox@5d1d0000 {
+		reg = <0x5d1d0000 0x10000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu3: mailbox@5d1e0000 {
+		reg = <0x5d1e0000 0x10000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu4: mailbox@5d1f0000 {
+		reg = <0x5d1f0000 0x10000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_mu5: mailbox@5d200000 {
+		reg = <0x5d200000 0x10000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_5A>;
+		status = "disabled";
+	};
+
+	lsio_mu6: mailbox@5d210000 {
+		reg = <0x5d210000 0x10000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_6A>;
+		status = "disabled";
+	};
+
+	lsio_mu13: mailbox@5d280000 {
+		reg = <0x5d280000 0x10000>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_13A>;
+	};
+
+	/* LPCG clocks */
+	pwm0_lpcg: clock-controller@5d400000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d400000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm0_lpcg_ipg_clk",
+				     "pwm0_lpcg_ipg_hf_clk",
+				     "pwm0_lpcg_ipg_s_clk",
+				     "pwm0_lpcg_ipg_slv_clk",
+				     "pwm0_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_0>;
+	};
+
+	pwm1_lpcg: clock-controller@5d410000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d410000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm1_lpcg_ipg_clk",
+				     "pwm1_lpcg_ipg_hf_clk",
+				     "pwm1_lpcg_ipg_s_clk",
+				     "pwm1_lpcg_ipg_slv_clk",
+				     "pwm1_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_1>;
+	};
+
+	pwm2_lpcg: clock-controller@5d420000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d420000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm2_lpcg_ipg_clk",
+				     "pwm2_lpcg_ipg_hf_clk",
+				     "pwm2_lpcg_ipg_s_clk",
+				     "pwm2_lpcg_ipg_slv_clk",
+				     "pwm2_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_2>;
+	};
+
+	pwm3_lpcg: clock-controller@5d430000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d430000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm3_lpcg_ipg_clk",
+				     "pwm3_lpcg_ipg_hf_clk",
+				     "pwm3_lpcg_ipg_s_clk",
+				     "pwm3_lpcg_ipg_slv_clk",
+				     "pwm3_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_3>;
+	};
+
+	pwm4_lpcg: clock-controller@5d440000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d440000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_4 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm4_lpcg_ipg_clk",
+				     "pwm4_lpcg_ipg_hf_clk",
+				     "pwm4_lpcg_ipg_s_clk",
+				     "pwm4_lpcg_ipg_slv_clk",
+				     "pwm4_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_4>;
+	};
+
+	pwm5_lpcg: clock-controller@5d450000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d450000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_5 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm5_lpcg_ipg_clk",
+				     "pwm5_lpcg_ipg_hf_clk",
+				     "pwm5_lpcg_ipg_s_clk",
+				     "pwm5_lpcg_ipg_slv_clk",
+				     "pwm5_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_5>;
+	};
+
+	pwm6_lpcg: clock-controller@5d460000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d460000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_6 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm6_lpcg_ipg_clk",
+				     "pwm6_lpcg_ipg_hf_clk",
+				     "pwm6_lpcg_ipg_s_clk",
+				     "pwm6_lpcg_ipg_slv_clk",
+				     "pwm6_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_6>;
+	};
+
+	pwm7_lpcg: clock-controller@5d470000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5d470000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>,
+			 <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>,
+			 <&lsio_bus_clk>,
+			 <&clk IMX_SC_R_PWM_7 IMX_SC_PM_CLK_PER>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "pwm7_lpcg_ipg_clk",
+				     "pwm7_lpcg_ipg_hf_clk",
+				     "pwm7_lpcg_ipg_s_clk",
+				     "pwm7_lpcg_ipg_slv_clk",
+				     "pwm7_lpcg_ipg_mstr_clk";
+		power-domains = <&pd IMX_SC_R_PWM_7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
new file mode 100644
index 000000000..c6540768b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+vpu: vpu@2c000000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x2c000000 0x0 0x2c000000 0x2000000>;
+	reg = <0 0x2c000000 0 0x1000000>;
+	power-domains = <&pd IMX_SC_R_VPU>;
+	status = "disabled";
+
+	mu_m0: mailbox@2d000000 {
+		compatible = "fsl,imx6sx-mu";
+		reg = <0x2d000000 0x20000>;
+		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+		status = "disabled";
+	};
+
+	mu1_m0: mailbox@2d020000 {
+		compatible = "fsl,imx6sx-mu";
+		reg = <0x2d020000 0x20000>;
+		interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+		status = "disabled";
+	};
+
+	mu2_m0: mailbox@2d040000 {
+		compatible = "fsl,imx6sx-mu";
+		reg = <0x2d040000 0x20000>;
+		interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+		status = "disabled";
+	};
+
+	vpu_core0: vpu-core@2d080000 {
+		reg = <0x2d080000 0x10000>;
+		compatible = "nxp,imx8q-vpu-decoder";
+		power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+		mbox-names = "tx0", "tx1", "rx";
+		mboxes = <&mu_m0 0 0>,
+			<&mu_m0 0 1>,
+			<&mu_m0 1 0>;
+		status = "disabled";
+	};
+
+	vpu_core1: vpu-core@2d090000 {
+		reg = <0x2d090000 0x10000>;
+		compatible = "nxp,imx8q-vpu-encoder";
+		power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+		mbox-names = "tx0", "tx1", "rx";
+		mboxes = <&mu1_m0 0 0>,
+			<&mu1_m0 0 1>,
+			<&mu1_m0 1 0>;
+		status = "disabled";
+	};
+
+	vpu_core2: vpu-core@2d0a0000 {
+		reg = <0x2d0a0000 0x10000>;
+		compatible = "nxp,imx8q-vpu-encoder";
+		power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+		mbox-names = "tx0", "tx1", "rx";
+		mboxes = <&mu2_m0 0 0>,
+			<&mu2_m0 0 1>,
+			<&mu2_m0 1 0>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
new file mode 100644
index 000000000..b9157ca08
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8dxl.dtsi"
+
+/ {
+	model = "Freescale i.MX8DXL EVK";
+	compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
+
+	aliases {
+		i2c2 = &i2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart0;
+	};
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * Memory reserved for optee usage. Please do not use.
+		 * This will be automatically added to dtb if OP-TEE is installed.
+		 * optee@96000000 {
+		 *     reg = <0 0x96000000 0 0x2000000>;
+		 *     no-map;
+		 * };
+		 */
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x14000000>;
+			alloc-ranges = <0 0x98000000 0 0x14000000>;
+			linux,cma-default;
+		};
+	};
+
+	mux3_en: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "mux3_en";
+		gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_fec1_sel: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_fec1_io: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec1_io_supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <3480>;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	mii_select: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mii-select";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&scu_gpio 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	nvmem-cells = <&fec_mac1>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			eee-broken-1000t;
+			qca,disable-smarteee;
+			qca,disable-hibernation-mode;
+			reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+			vddio-supply = <&vddio0>;
+
+			vddio0: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+/*
+ * fec1 shares the some PINs with usdhc2.
+ * by default usdhc2 is enabled in this dts.
+ * Please disable usdhc2 to enable fec1
+ */
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	rx-internal-delay-ps = <2000>;
+	nvmem-cells = <&fec_mac0>;
+	nvmem-cell-names = "mac-address";
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio1>;
+
+			vddio1: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&flexspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	nxp,fspi-dll-slvdly = <4>;
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca6416_2: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9548_1: i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			max7322: gpio@68 {
+				compatible = "maxim,max7322";
+				reg = <0x68>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&lsio_gpio4 {
+	status = "okay";
+};
+
+&lsio_gpio5 {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usbphy1 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <114>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy2 {
+	/* USB eye diagram tests result */
+	fsl,tx-d-cal = <111>;
+	status = "okay";
+};
+
+&usbotg2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&lpspi3 {
+	fsl,spi-only-use-cs1-sel;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi3>;
+	pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	spidev0: spi@0 {
+		reg = <0>;
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD	0x000514a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD	0x000014a0
+			IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1		0x0600004c
+			IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN	0x0600004c
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR		0x00000021
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_MDC_CONN_EQOS_MDC				0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO			0x06000020
+			IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL	0x06000020
+			IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2		0x06000020
+			IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3		0x06000020
+			IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL	0x06000020
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0     0x06000021
+			IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1     0x06000021
+			IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2     0x06000021
+			IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3     0x06000021
+			IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS         0x06000021
+			IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B     0x06000021
+			IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK       0x06000021
+			IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK       0x06000021
+			IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0     0x06000021
+			IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1     0x06000021
+			IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2     0x06000021
+			IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3     0x06000021
+			IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS         0x06000021
+			IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B     0x06000021
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD		0x000014a0
+			IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD		0x000014a0
+			IMX8DXL_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+			IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x00000060
+			IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x00000060
+			IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+		>;
+	};
+
+	pinctrl_lpspi3: lpspi3grp {
+		fsl,pins = <
+			IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK		0x6000040
+			IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO		0x6000040
+			IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI		0x6000040
+			IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1		0x6000040
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA		0x06000021
+			IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_cm40_lpuart: cm40lpuartgrp {
+		fsl,pins = <
+			IMX8DXL_ADC_IN2_M40_UART0_RX		0x06000020
+			IMX8DXL_ADC_IN3_M40_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA		0x06000021
+			IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL		0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8DXL_UART0_RX_ADMA_UART0_RX		0x06000020
+			IMX8DXL_UART0_TX_ADMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK	0x06000041
+			IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD	0x00000021
+			IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30	0x00000040 /* RESET_B */
+			IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00	0x00000021 /* WP */
+			IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01	0x00000021 /* CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK		0x06000041
+			IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2	0x00000021
+			IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3	0x00000021
+			IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
new file mode 100644
index 000000000..e2eeddf38
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&audio_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&dma_ipg_clk {
+	clock-frequency = <160000000>;
+};
+
+&adc0 {
+	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c0 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+	interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+	interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi0 {
+	interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi1 {
+	interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi2 {
+	interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpspi3 {
+	interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
new file mode 100644
index 000000000..652493ae4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+/delete-node/ &enet1_lpcg;
+/delete-node/ &fec2;
+
+&conn_subsys {
+	conn_enet0_root_clk: clock-conn-enet0-root {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "conn_enet0_root_clk";
+	};
+
+	eqos: ethernet@5b050000 {
+		compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
+		reg = <0x5b050000 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "eth_wake_irq", "macirq";
+		clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
+			 <&eqos_lpcg IMX_LPCG_CLK_6>,
+			 <&eqos_lpcg IMX_LPCG_CLK_0>,
+			 <&eqos_lpcg IMX_LPCG_CLK_5>,
+			 <&eqos_lpcg IMX_LPCG_CLK_2>;
+		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+		assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <125000000>;
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+		status = "disabled";
+	};
+
+	usbotg2: usb@5b0e0000 {
+		compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+		reg = <0x5b0e0000 0x200>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,usbphy = <&usbphy2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		/*
+		 * usbotg1 and usbotg2 share one clcok.
+		 * scu firmware disables the access to the clock and keeps
+		 * it always on in case other core (M4) uses one of these.
+		 */
+		clocks = <&clk_dummy>;
+		ahb-burst-config = <0x0>;
+		tx-burst-size-dword = <0x10>;
+		rx-burst-size-dword = <0x10>;
+		power-domains = <&pd IMX_SC_R_USB_1>;
+		status = "disabled";
+
+		clk_dummy: clock-dummy {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "clk_dummy";
+		};
+	};
+
+	usbmisc2: usbmisc@5b0e0200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x5b0e0200 0x200>;
+	};
+
+	usbphy2: usbphy@5b110000 {
+		compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
+		reg = <0x5b110000 0x1000>;
+		clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+		status = "disabled";
+	};
+
+	eqos_lpcg: clock-controller@5b240000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&conn_enet0_root_clk>,
+			 <&conn_axi_clk>,
+			 <&conn_axi_clk>,
+			 <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
+			 <&conn_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>,
+				<IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
+				<IMX_LPCG_CLK_6>;
+		clock-output-names = "eqos_ptp",
+				     "eqos_mem_clk",
+				     "eqos_aclk",
+				     "eqos_clk",
+				     "eqos_csr_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
+
+	usb2_2_lpcg: clock-controller@5b280000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5b280000 0x10000>;
+		#clock-cells = <1>;
+		clock-indices = <IMX_LPCG_CLK_7>;
+		clocks = <&conn_ipg_clk>;
+		clock-output-names = "usboh3_2_phy_ipg_clk";
+		power-domains = <&pd IMX_SC_R_USB_1_PHY>;
+	};
+
+};
+
+&enet0_lpcg {
+	clocks = <&conn_enet0_root_clk>,
+		 <&conn_enet0_root_clk>,
+		 <&conn_axi_clk>,
+		 <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
+		 <&conn_ipg_clk>,
+		 <&conn_ipg_clk>;
+};
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec";
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+	assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
+	assigned-clock-rates = <125000000>;
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
+	interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbotg1 {
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+	/*
+	 * usbotg1 and usbotg2 share one clock
+	 * scfw disable clock access and keep it always on
+	 * in case other core (M4) use one of these.
+	 */
+	clocks = <&clk_dummy>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
new file mode 100644
index 000000000..550f51370
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+&ddr_pmu0 {
+	compatible = "fsl,imx8-ddr-pmu";
+	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
new file mode 100644
index 000000000..5f4f789e4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+&flexspi0 {
+	compatible = "nxp,imx8dxl-fspi";
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 47 13>,
+		      <&iomuxc 13 61 4>,
+		      <&iomuxc 19 67 4>,
+		      <&iomuxc 24 72 1>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 4 74 5>,
+		      <&iomuxc 9 80 16>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 1 98 2>,
+		      <&iomuxc 3 101 1>,
+		      <&iomuxc 5 107 8>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 115 4>,
+		      <&iomuxc 9 121 1>,
+		      <&iomuxc 10 120 1>,
+		      <&iomuxc 11 123 1>,
+		      <&iomuxc 12 122 1>,
+		      <&iomuxc 13 125 1>,
+		      <&iomuxc 14 124 1>,
+		      <&iomuxc 16 126 1>,
+		      <&iomuxc 17 128 1>,
+		      <&iomuxc 18 131 1>,
+		      <&iomuxc 19 130 1>,
+		      <&iomuxc 20 133 1>,
+		      <&iomuxc 21 132 1>,
+		      <&iomuxc 22 129 1>,
+		      <&iomuxc 23 134 1>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 12>,
+		      <&iomuxc 19 22 2>,
+		      <&iomuxc 21 25 2>,
+		      <&iomuxc 29 29 3>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 32 3>,
+		      <&iomuxc 3 36 6>,
+		      <&iomuxc 9 43 3>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 53 7>,
+		      <&iomuxc 8 86 10>,
+		      <&iomuxc 19 107 8>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+	interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 8 22 2>,
+		      <&iomuxc 10 25 2>,
+		      <&iomuxc 16 44 2>;
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+	interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
new file mode 100644
index 000000000..792b7224c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020, 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &eqos;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		mu1 = &lsio_mu1;
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 2 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			#cooling-cells = <2>;
+			operating-points-v2 = <&a35_opp_table>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,scu-pd";
+			#power-domain-cells = <1>;
+			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
+				     239 240 166 169>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		scu_gpio: gpio {
+			compatible = "fsl,imx8qxp-sc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8dxl-iomuxc";
+		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			fec_mac0: mac@2c4 {
+				reg = <0x2c4 6>;
+			};
+
+			fec_mac1: mac@2c6 {
+				reg = <0x2c6 6>;
+			};
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		sc_pwrkey: keys {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	/* The two values below cannot be changed by the board */
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8dxl-ss-adma.dtsi"
+#include "imx8dxl-ss-conn.dtsi"
+#include "imx8dxl-ss-lsio.dtsi"
+#include "imx8dxl-ss-ddr.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
new file mode 100644
index 000000000..b10e2a703
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie0_refclk_gated:  pcie0-refclk-gated {
+		compatible = "gpio-gate-clock";
+		clocks = <&pcie0_refclk>;
+		#clock-cells = <0>;
+		enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg1: regulator-usbotg1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg1>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		regulator-name = "mipi_pwr";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk_gated>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk_gated>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usbotg1>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphynop2 {
+	reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13              0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_reg_usb_otg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
new file mode 100644
index 000000000..905c98cb0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-beacon-som.dtsi"
+#include "imx8mm-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
+	compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	reg_hdmi: regulator-hdmi-dvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		regulator-name = "hdmi_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-hdmi";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+};
+
+&i2c2 {
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_bridge>;
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_hdmi>;
+		a2vdd-supply = <&reg_hdmi>;
+		dvdd-supply = <&reg_hdmi>;
+		pvdd-supply = <&reg_hdmi>;
+		v1p2-supply = <&reg_hdmi>;
+		v3p3-supply = <&reg_hdmi>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi_bridge: hdmibridgegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_reg_hdmi: reghdmigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
new file mode 100644
index 000000000..f264102bd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		max-speed = <4000000>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
new file mode 100644
index 000000000..b1f2beb40
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -0,0 +1,1007 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Data Modul i.MX8M Mini eDM SBC";
+	compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* There are 1/2/4 GiB options, adjusted by bootloader. */
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_backlight>;
+		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 5000000 0>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_xtal32k: clk-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	panel: panel {
+		backlight = <&backlight>;
+		power-supply = <&reg_panel_vcc>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_panel_vcc: regulator-panel-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+		regulator-name = "PANEL_VCC";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_usdhc2_vcc: regulator-usdhc2-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 0>;
+		enable-active-high;
+	};
+
+	watchdog {
+		/* TPS3813 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		compatible = "linux,wdt-gpio";
+		always-running;
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 2..3 seconds */
+		hw_margin_ms = <1500>;
+		/* Disabled by default */
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128FVSI */
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi2 {	/* Feature connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless feature board plugged in. */
+	status = "disabled";
+};
+
+&ecspi3 {	/* Display connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&fec1_phy>;
+	phy-supply = <&buck4_reg>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		fec1_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-name = "VDDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh: vddh-regulator {
+				regulator-name = "VDDH";
+			};
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "ENET_RST#", "WDOG_B#", "PMIC_INT#",
+		"", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#",
+		"WDOG_KICK#", "M2-B_PCIE_CLKREQ#",
+		"USB1_OTG_ID_3V3", "ENET_WOL#",
+		"", "", "", "ENET_INT#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#",
+		"M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#",
+		"PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#",
+		"MEMCFG0", "WDOG_EN",
+		"M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#",
+		"", "", "", "",
+		"", "", "", "SD2_RESET#", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+		"CSI_PD_1V8", "CSI_RESET_1V8#", "", "",
+		"", "", "", "",
+		"", "", "", "M2-B_WAKE_WWAN_1V8#",
+		"M2-B_RESET_1V8#", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"NC0", "NC1", "BOOTCFG0", "BOOTCFG1",
+		"BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5",
+		"BOOTCFG6", "BOOTCFG7", "NC10", "NC11",
+		"BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11",
+		"BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15",
+		"NC20", "", "", "",
+		"", "CAN_INT#", "CAN_RST#", "GPIO4_IO27",
+		"DIS_USB_DN2", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03",
+		"GPIO5_IO04", "", "", "",
+		"", "SPI1_CS#", "", "",
+		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+		"I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "",
+		"", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		#clock-cells = <0>;
+		clocks = <&clk_xtal32k>;
+		clock-output-names = "clk-32k-out";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		rohm,reset-snvs-powered;
+
+		/*
+		 * i.MX 8M Mini Data Sheet for Consumer Products
+		 * 3.1.3 Operating ranges
+		 * MIMX8MM4DVTLZAA
+		 */
+		regulators {
+			/* VDD_SOC */
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <950000>;
+			};
+
+			/* VDD_DRAM, BUCK5 */
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				/* 1.5 GHz DDR bus clock */
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 3V3_VDD, BUCK6 */
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V8_VDD, BUCK7 */
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V1_NVCC_DRAM, BUCK8 */
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V8_NVCC_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 0V8_VDD_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V8_VDDA */
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 0V9_VDD_PHY */
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* 1V2_VDD_PHY */
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	usb-hub@2c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		compatible = "microchip,usb2514bi";
+		reg = <0x2c>;
+		individual-port-switching;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		self-powered;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "st,m41t62";
+		reg = <0x68>;
+		interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pcieclk: clk@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c3 {	/* Display connector I2C */
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <320000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {	/* Feature connector I2C */
+	/* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+	clock-frequency = <320000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+		    <&pinctrl_panel_expansion>;
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x44
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x44
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x44
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x44
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x44
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x44
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x44
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x44
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x44
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x40
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			/* ENET_RST# */
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x6
+			/* ENET_WOL# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x40000090
+			/* ENET_INT# */
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x40000090
+		>;
+	};
+
+	pinctrl_hog_feature: hog-feature-grp {
+		fsl,pins = <
+			/* GPIO4_IO27 */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x40000006
+			/* GPIO5_IO03 */
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3			0x40000006
+			/* GPIO5_IO04 */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4			0x40000006
+
+			/* CAN_INT# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x40000090
+			/* CAN_RST# */
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26		0x26
+		>;
+	};
+
+	pinctrl_hog_panel: hog-panel-grp {
+		fsl,pins = <
+			/* GRAPHICS_GPIO0_1V8 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x26
+		>;
+	};
+
+	pinctrl_hog_misc: hog-misc-grp {
+		fsl,pins = <
+			/* PG_V_IN_VAR# */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x40000000
+			/* CSI_PD_1V8 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8		0x0
+			/* CSI_RESET_1V8# */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9		0x0
+
+			/* DIS_USB_DN1 */
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1			0x0
+			/* DIS_USB_DN2 */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x0
+
+			/* EEPROM_WP_1V8# */
+			MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5		0x100
+			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6		0x0
+			/* GRAPHICS_PRSNT_1V8# */
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7		0x40000000
+
+			/* CLK_CCM_CLKO1_3V3 */
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x10
+		>;
+	};
+
+	pinctrl_hog_sbc: hog-sbc-grp {
+		fsl,pins = <
+			/* MEMCFG[0..2] straps */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8		0x40000140
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1			0x40000140
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0			0x40000140
+
+			/* BOOT_CFG[0..15] straps */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x40000000
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x40000000
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x40000000
+
+			/* Not connected pins */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x0
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x0
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x0
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x0
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000084
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x84
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x84
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000084
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x84
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x84
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000084
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x84
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c4: i2c4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000084
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x84
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x84
+		>;
+	};
+
+	pinctrl_panel_backlight: panel-backlight-grp {
+		fsl,pins = <
+			/* BL_ENABLE_1V8 */
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x104
+		>;
+	};
+
+	pinctrl_panel_expansion: panel-expansion-grp {
+		fsl,pins = <
+			/* DSI_RESET_1V8# */
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x2
+			/* DSI_IRQ_1V8# */
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3		0x40000090
+		>;
+	};
+
+	pinctrl_panel_vcc_reg: panel-vcc-grp {
+		fsl,pins = <
+			/* TFT_ENABLE_1V8 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6		0x104
+		>;
+	};
+
+	pinctrl_panel_pwm: panel-pwm-grp {
+		fsl,pins = <
+			/* BL_PWM_3V3 */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT		0x12
+		>;
+	};
+
+	pinctrl_pcie0: pcie-grp {
+		fsl,pins = <
+			/* M2-B_RESET_1V8# */
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x102
+			/* M2-B_PCIE_RST# */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x2
+			/* M2-B_FULL_CARD_PWROFF_1V8# */
+			MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4		0x102
+			/* M2-B_W_DISABLE1_WWAN_1V8# */
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x102
+			/* M2-B_W_DISABLE2_GPS_1V8# */
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11		0x102
+			/* CLK_M2_32K768 */
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x14
+			/* M2-B_WAKE_WWAN_1V8# */
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x40000140
+			/* M2-B_PCIE_WAKE# */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x40000140
+			/* M2-B_PCIE_CLKREQ# */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x40000140
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x40000090
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			/* RTC_IRQ# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x40000090
+		>;
+	};
+
+	pinctrl_sai5: sai5-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK		0x100
+			MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0x0
+			MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0x100
+			MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0x100
+			MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x90
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x90
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x50
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x50
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x50
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x90
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x50
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x90
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x40
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x40
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_usb_hub: usb-hub-grp {
+		fsl,pins = <
+			/* USBHUB_RESET# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x4
+		>;
+	};
+
+	pinctrl_usb_otg1: usb-otg1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x40000000
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x4
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x40000090
+		>;
+	};
+
+	pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x400000d6
+			MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+			MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B		0x40
+		>;
+	};
+
+	pinctrl_watchdog_gpio: watchdog-gpio-grp {
+		fsl,pins = <
+			/* WDOG_B# */
+			MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2		0x26
+			/* WDOG_EN -- ungate WDT RESET# signal propagation */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9		0x6
+			/* WDOG_KICK# / WDI */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x26
+		>;
+	};
+};
+
+&pcie_phy {
+	fsl,clkreq-unsupported;	/* CLKREQ_B is not connected to suitable input */
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	clocks = <&pcieclk 0>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcieclk 0>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_panel_pwm>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	fsl,sai-mclk-direction-output;
+	/* Input into codec PLL */
+	assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <22579200>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&snvs_rtc {
+	clocks = <&pmic>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&uart3 {	/* A53 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {	/* M4 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	/* UART4 is reserved for CM and RDC blocks CA access to UART4. */
+	status = "disabled";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {	/* MicroSD */
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vcc>;
+	status = "okay";
+};
+
+&usdhc3 {	/* eMMC */
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
new file mode 100644
index 000000000..010e836eb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-ddr4-evk.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM DDR4 EVK with CYW43455 WIFI/BT board";
+	compatible = "fsl,imx8mm-ddr4-evk", "fsl,imx8mm";
+
+	leds {
+		pinctrl-0 = <&pinctrl_gpio_led_2>;
+
+		status {
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
+			MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
+			MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B		0x00000096
+			MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE		0x00000096
+			MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00		0x00000096
+			MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01		0x00000096
+			MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02		0x00000096
+			MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03		0x00000096
+			MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04		0x00000096
+			MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05		0x00000096
+			MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06		0x00000096
+			MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07		0x00000096
+			MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B		0x00000096
+			MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B	0x00000056
+			MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B		0x00000096
+			MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B		0x00000096
+		>;
+	};
+
+	pinctrl_gpio_led_2: gpioled2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4	0x19
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
new file mode 100644
index 000000000..c8ff70212
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich@emtrion.com>
+//
+
+/dts-v1/;
+
+#include "imx8mm-emcon.dtsi"
+#include "imx8mm-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX8M mini on Avari";
+	compatible = "emtrion,emcon-mx8mm-avari", "fsl,imx8mm";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
new file mode 100644
index 000000000..d897a8527
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich@emtrion.com>
+//
+
+/ {
+	aliases {
+		boardid = &boardID;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_wall_5p0: regulator-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: regulator-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: regulator-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: regulator-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	boardID: gpio@3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <1>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "disabled";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
new file mode 100644
index 000000000..af7dc8d1f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -0,0 +1,625 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP
+// Copyright (C) 2021 emtrion GmbH
+//
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-green {
+			label = "som:green";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-red {
+			label = "som:red";
+			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <9>;
+		status = "disabled";
+	};
+
+	reg_usdhc1_vmmc: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+				<&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_csi_pwn: csi-pwn-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1cs-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC				0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO			0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9			0x19
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+			MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82
+		>;
+	};
+
+	pinctrl_flexspi1: flexspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3	0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpio-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_lvds: lvds-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x06
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicirq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x06
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT		0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN			0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+
+			/* rts and cts */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x41
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	/* no reset for sdhc2 interface */
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x1c4
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	bd71847: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rv1805: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+	};
+};
+
+&mu {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12000000>;
+	status = "disabled";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		<&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+	status = "disabled";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
new file mode 100644
index 000000000..1c4e4d175
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Emtop Embedded Solutions
+ */
+
+/dts-v1/;
+
+#include "imx8mm-emtop-som.dtsi"
+
+/ {
+	model = "Emtop Embedded Solutions i.MX8M Mini Baseboard V1";
+	compatible = "ees,imx8mm-emtop-baseboard", "ees,imx8mm-emtop-som",
+		"fsl,imx8mm";
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
new file mode 100644
index 000000000..67d22d376
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-som.dtsi
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Emtop Embedded Solutions
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Emtop Embedded Solutions i.MX8M Mini SOM-IMX8MMLPD4 SoM";
+	compatible = "ees,imx8mm-emtop-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <945000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <3600000>;
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_led: emtop-gpio-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16			0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29			0x19
+		>;
+	};
+
+	pinctrl_i2c1: emtop-i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL				0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA				0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: emtop-pmic-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3			0x41
+		>;
+	};
+
+	pinctrl_uart2: emtop-uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX			0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX			0x140
+		>;
+	};
+
+	pinctrl_usdhc3: emtop-usdhc3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: emtop-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: emtop-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK			0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD			0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0			0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1			0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2			0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3			0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4			0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5			0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6			0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7			0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE			0x196
+		>;
+	};
+
+	pinctrl_wdog: emtop-wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B			0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
new file mode 100644
index 000000000..b68954bcc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVK board";
+	compatible = "fsl,imx8mm-evk", "fsl,imx8mm";
+
+	aliases {
+		spi0 = &flexspi;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
new file mode 100644
index 000000000..a882c86ec
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -0,0 +1,743 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <250>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_wlf>;
+		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <32>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v3p3-supply = <&reg_vddext_3v3>;
+		v1p2-supply = <&buck5_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 8>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "nxp,pca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&buck4_reg>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MM_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	wakeup-source;
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_backlight>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
+		>;
+	};
+
+	pinctrl_gpio_wlf: gpiowlfgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0xd6
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT	0x06
+		>;
+	};
+
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 000000000..164df627a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB";
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	/delete-node/ pmic@4b;
+
+	pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* VDD_SOC with PCIe */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/* VDD_GPU, VDD_VPU, VDD_DRAM */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_3V3 */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1V8, NVCC_1V8, NVCC_ENET */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_DRAM for LPDDR4 */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SNVS_1P8 */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_SNVS_0P8 */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_*_1V8 */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_0V9 */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SD2 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
new file mode 100644
index 000000000..502745402
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+	model = "Engicam i.Core MX8M Mini C.TOUCH 2.0";
+	compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm",
+		     "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
new file mode 100644
index 000000000..ddac8bc7a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "imx8mm.dtsi"
+#include "imx8mm-icore-mx8mm.dtsi"
+
+/ {
+	model = "Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-mx8mm-edimm2.2", "engicam,icore-mx8mm",
+		     "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* SD */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
new file mode 100644
index 000000000..def7bb5d3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	compatible = "engicam,icore-mx8mm", "fsl,imx8mm";
+};
+
+&A53_0 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_buck4>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x08>;
+
+		regulators {
+			reg_ldo1: ldo1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo2: ldo2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo3: ldo3 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_ldo4: ldo4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck1: buck1 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck2: buck2 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck3: buck3 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck4: buck4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck5: buck5 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck6: buck6 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_buck7: buck7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+		>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
new file mode 100644
index 000000000..055faae79
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15-evk.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ * Copyright 2022 Pengutronix
+ */
+
+/dts-v1/;
+
+#include "imx8mm-innocomm-wb15.dtsi"
+
+/ {
+	model = "InnoComm WB15-EVK";
+	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			label = "debug";
+			gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_vsd_3v3: regulator-vsd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_ethphy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fec_phy_reg>;
+		regulator-name = "PHY_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			phy-supply = <&reg_ethphy>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_vsd_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x03
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x03
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec_phy: fec-phy-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec_phy_reg: fec-phy-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x16
+		>;
+	};
+
+	pinctrl_gpio_leds: led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0xd6
+		>;
+	};
+
+	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
new file mode 100644
index 000000000..299752aa8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-innocomm-wb15.dtsi
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Bang & Olufsen
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	reg_modem: regulator-modem {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_regulator>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "epdev_on";
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_3v3_out: regulator-3v3-out {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_OUT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <850000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <850000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// buck5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// buck6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// buck7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// buck8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+	fsl,max-link-speed = <1>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4349-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_modem_bt>;
+		device-wakeup-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&reg_3v3_out>;
+		vddio-supply = <&reg_3v3_out>;
+		clocks = <&osc_32k>;
+		max-speed = <3000000>;
+		clock-names = "extclk";
+	};
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/delete-node/ &sec_jr1; /* Job ring in use by OP-TEE */
+
+&iomuxc {
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x6
+		>;
+	};
+
+	pinctrl_modem_bt: modem-bt-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+			MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_modem_regulator: modem-reg-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16    0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x190
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x194
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x40000196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x196
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
new file mode 100644
index 000000000..8b16bd685
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-osm-s.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM OSM-S (N802X S)";
+	compatible = "kontron,imx8mm-bl-osm-s", "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+	};
+
+	/* fixed crystal dedicated to mcp2542fd */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "osc-can";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_rst_eth2: regulator-rst-eth2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_eth2>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-name = "rst-usb-eth2";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+		gpio = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb1-vbus";
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vdd-5v";
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp251xfd";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>;
+		/*
+		 * Limit the SPI clock to 15 MHz to prevent issues
+		 * with corrupted data due to chip errata.
+		 */
+		spi-max-frequency = <15000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeram@0 {
+		compatible = "microchip,48l640";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rgmii-rxid";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+	gpio-line-names = "", "", "", "dio1-out", "", "", "dio1-in", "dio2-out",
+			  "dio2-in", "dio3-out", "dio3-in", "dio4-out", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "", "", "dio4-in", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	disable-over-current;
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19 /* PHY RST */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19 /* ETH IRQ */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x19
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x19
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+		>;
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
+		>;
+	};
+
+	pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_usb_eth2: usbeth2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
new file mode 100644
index 000000000..dcec57c20
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-kontron-sl.dtsi"
+
+/ {
+	model = "Kontron BL i.MX8MM (N801X S)";
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &usbnet;
+		rtc0 = &rx8900;
+		rtc1 = &snvs_rtc;
+	};
+
+	/* fixed crystal dedicated to mcp2515 */
+	osc_can: clock-osc-can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "osc-can";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led5 {
+			label = "led5";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led6 {
+			label = "led6";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 5000 0>;
+	};
+
+	reg_rst_eth2: regulator-rst-eth2 {
+		compatible = "regulator-fixed";
+		regulator-name = "rst-usb-eth2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_eth2>;
+		gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_vdd_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can0: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can>;
+		clocks = <&osc_can>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&reg_vdd_3v3>;
+		xceiver-supply = <&reg_vdd_5v>;
+	};
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-connection-type = "rgmii-rxid";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <1>;
+			reset-deassert-us = <15000>;
+			reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rx8900: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbnet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_nvcc_sd>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_can: cangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x82
+			MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x82
+			MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x82
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19 /* PHY RST */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* ETH IRQ */
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x19
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x19
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x19
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x19
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x19
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+		>;
+	};
+
+	pinctrl_usb_eth2: usbeth2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x019
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
new file mode 100644
index 000000000..6e75ab879
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron OSM-S i.MX8MM (N802X SOM)";
+	compatible = "kontron,imx8mm-osm-s", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio4 1 IRQ_TYPE_LEVEL_HIGH>;
+		trickle-diode-disable;
+	};
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
new file mode 100644
index 000000000..1f8326613
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Kontron Electronics GmbH
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Kontron SL i.MX8MM (N801X SOM)";
+	compatible = "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*
+		 * There are multiple SoM flavors with different DDR sizes.
+		 * The smallest is 1GB. For larger sizes the bootloader will
+		 * update the reg property.
+		 */
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x1e0000>;
+			};
+
+			partition@1e0000 {
+				label = "env";
+				reg = <0x1e0000 0x10000>;
+			};
+
+			partition@1f0000 {
+				label = "env_redundant";
+				reg = <0x1f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				regulator-name = "+0V8_VDD_SOC (BUCK1)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				regulator-name = "+0V9_VDD_ARM (BUCK2)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-name = "+3V3 (BUCK4)";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-name = "+1V8 (BUCK5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-name = "+0V8_VDD_SNVS (LDO2)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdda: LDO3 {
+				regulator-name = "+1V8_VDDA (LDO3)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-name = "+0V9_VDD_PHY (LDO4)";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-name = "NVCC_SD (LDO5)";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&uart3 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x141
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x019
+			MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
new file mode 100644
index 000000000..0b123a840
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021-2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+
+/ {
+	model = "MENLO MX8MM EMBEDDED DEVICE";
+	compatible = "menlo,mx8menlo",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+
+	/delete-node/ gpio-keys;
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-1 {
+			label = "TestLed601";
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			label = "TestLed602";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* Fixed clock dedicated to SPI CAN on carrier board */
+	clk_xtal20: clk-xtal20 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* CAN controller on the baseboard */
+	canfd: can@0 {
+		compatible = "microchip,mcp2518fd";
+		clocks = <&clk_xtal20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+
+};
+
+&ecspi2 {
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+
+};
+
+&ethphy0 {
+	max-speed = <100>;
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&flexspi {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <66000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "DISP_reset", "KBD_intI",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	/*
+	 * CPLD_D[n] is ARM_CPLD[n] in schematic
+	 * CPLD_int is SA_INTERRUPT in schematic
+	 * CPLD_reset is RESET_SOFT in schematic
+	 */
+	gpio-line-names =
+		"CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+		"", "CPLD_D[7]", "", "",
+		"", "", "", "CPLD_D[5]",
+		"CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+		"CPLD_D[0]", "", "", "",
+		"", "", "", "",
+		"", "", "", "KBD_intK",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio_expander_21 {
+	status = "okay";
+};
+
+&hwmon {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	/* None of this is present on the SoM. */
+	/delete-node/ bridge@2c;
+	/delete-node/ hdmi@48;
+	/delete-node/ touch@4a;
+	/delete-node/ sensor@4f;
+	/delete-node/ eeprom@50;
+	/delete-node/ eeprom@57;
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>,
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
+
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3			0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x4
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x4
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x1c4
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x1c4
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x1c4
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x1c4
+		>;
+	};
+
+	pinctrl_uart4_rts: uart4rtsgrp {
+		fsl,pins = <
+			/* SODIMM 222 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x184
+		>;
+	};
+};
+
+&pinctrl_gpio1 {
+	fsl,pins = <
+		/* SODIMM 206 */
+		MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4			0x1c4
+	>;
+};
+
+&pinctrl_gpio_hog1 {
+	fsl,pins = <
+		/* SODIMM 88 */
+		MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20			0x1c4
+		/* CPLD_int */
+		MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1				0x1c4
+		/* CPLD_reset */
+		MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2			0x1c4
+		/* SODIMM 94 */
+		MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3			0x1c4
+		/* SODIMM 96 */
+		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
+		/* CPLD_D[7] */
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
+		/* CPLD_D[6] */
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
+		/* CPLD_D[5] */
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
+		/* CPLD_D[4] */
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
+		/* CPLD_D[3] */
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
+		/* CPLD_D[2] */
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
+		/* CPLD_D[1] */
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
+		/* CPLD_D[0] */
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
+		/* KBD_intK */
+		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
+		/* DISP_reset */
+		MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22			0x1c4
+		/* KBD_intI */
+		MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23			0x1c4
+		/* SODIMM 46 */
+		MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24			0x1c4
+	>;
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		/* SODIMM 149 */
+		MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX			0x1c4
+		/* SODIMM 147 */
+		MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX			0x1c4
+		/* SODIMM 210 */
+		MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B			0x1c4
+		/* SODIMM 212 */
+		MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B			0x1c4
+	>;
+};
+
+&reg_usb_otg1_vbus {
+	/delete-property/ enable-active-high;
+	gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
+};
+
+&reg_usb_otg2_vbus {
+	/delete-property/ enable-active-high;
+	gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+	status = "disabled";
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
new file mode 100644
index 000000000..0e8f0d716
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Boundary Devices i.MX8MMini Nitrogen8MM Rev2 board.
+ * Adrien Grassein <adrien.grassein@gmail.com.com>
+ */
+/dts-v1/;
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MMini Nitrogen8MM Rev2";
+	compatible = "boundary,imx8mm-nitrogen8mm", "fsl,imx8mm";
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-wm8960 {
+		audio-cpu = <&sai1>;
+		audio-codec = <&wm8960>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "MICB";
+		compatible = "fsl,imx-audio-wm8960";
+		/* JD2: hp detect high for headphone*/
+		hp-det-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		/* Jack is not stuffed */
+		mic-det-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		model = "wm8960-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_wm8960>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_buck3>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_buck3>;
+};
+
+/* J15 */
+&ecspi2 {
+	assigned-clocks = <&clk IMX8MM_CLK_ECSPI2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>;
+	assigned-clock-rates = <40000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupts-extended = <&gpio3 16 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x8>;
+
+		regulators {
+			reg_ldo1: ldo1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo2: ldo2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo3: ldo3 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_ldo4: ldo4 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck1: buck1 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck2: buck2 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck3: buck3 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck4: buck4 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck5: buck5 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck6: buck6 {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_buck7: buck7 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c3@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rtc@68 {
+				compatible = "microcrystal,rv4162";
+				reg = <0x68>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c3a_rv4162>;
+				interrupts-extended = <&gpio4 22 IRQ_TYPE_LEVEL_LOW>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MM_CLK_SAI1_ROOT>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	assigned-clocks = <&clk IMX8MM_CLK_PWM2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_40M>;
+	assigned-clock-rates = <40000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+/* BT */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* J15 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* J9 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	sdhci-caps-mask = <0x80000000 0x0>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_vref_3v3>;
+	vqmmc-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+/* sdcard */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_ldo2>;
+	status = "okay";
+};
+
+/* wlan */
+&usdhc3 {
+	bus-width = <4>;
+	sdhci-caps-mask = <0x2 0x0>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	vqmmc-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+/* USB OTG port */
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	power-active-high;
+	status = "okay";
+};
+
+/* USB Host port */
+&usbotg2 {
+	dr_mode = "host";
+	over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg2>;
+	power-active-high;
+	/*
+	 * FIXME: having USB2 enabled hangs the boot just after:
+	 *[    1.655941] ci_hdrc ci_hdrc.1: EHCI Host Controller
+	 *[    1.660880] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
+	 *[    1.681505] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
+	 *[    1.687730] hub 2-0:1.0: USB hub found
+	 *[    1.691528] hub 2-0:1.0: 1 port detected
+	 */
+	status = "disabled";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x19
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x19
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x159
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x09
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x09
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3a_rv4162: i2c3a-rv4162grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1c0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x16
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x16
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x16
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x16
+		>;
+	};
+
+	pinctrl_reg_wlan_vmmc: reg-wlan-vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			/* wm8960 */
+			MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK	0xd6
+			MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC	0xd6
+			MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			/* Bluetooth PCM */
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_sound_wm8960: sound-wm8960grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x80
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x80
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140
+			MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140
+			MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140
+			MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x16
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x156
+		>;
+	};
+
+	pinctrl_usbotg2: usbotg2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR	0x16
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x15
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d0
+			MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4	0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5	0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6	0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x03
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phg.dts b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
new file mode 100644
index 000000000..606a4f4d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phg.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Fabio Estevam <festevam@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+
+/ {
+	model = "Cloos i.MX8MM PHG board";
+	compatible = "cloos,imx8mm-phg", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			label = "status1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "status2";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "status3";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "run";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "powerled";
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus_ctrl>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	panel {
+		compatible = "panel-lvds";
+		width-mm = <170>;
+		height-mm = <28>;
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <49500000>;
+			hactive = <800>;
+			hback-porch = <48>;
+			hfront-porch = <312>;
+			hsync-len = <40>;
+			vactive = <600>;
+			vback-porch = <19>;
+			vfront-porch = <61>;
+			vsync-len = <20>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_out_bridge: endpoint {
+				remote-endpoint = <&bridge_out_panel>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			compatible = "ethernet-phy-ieee802.3-c22";
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	bridge@2c {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2c>;
+		enable-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi_bridge>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in_dsi: endpoint {
+					remote-endpoint = <&dsi_out_bridge>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				bridge_out_panel: endpoint {
+					remote-endpoint = <&panel_out_bridge>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out_bridge: endpoint {
+				data-lanes = <1 2>;
+				lane-polarities = <1 0 0 0 0>;
+				remote-endpoint = <&bridge_in_dsi>;
+			};
+		};
+	};
+};
+
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	power-domains = <&pgc_otg1>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_400M>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_beeper: beepergrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x19
+		>;
+	};
+
+	pinctrl_dsi_bridge: dsibridgeggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x14
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x14
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x14
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x14
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x14
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22		0x10
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x19
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_otg_vbus_ctrl: otgvbusctrlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2		0x119
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
new file mode 100644
index 000000000..92e62fe31
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Polis-i.MX8MM RDK";
+	compatible = "phytec,imx8mm-phyboard-polis-rdk",
+		     "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	bt_osc_32k: bt-lp-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "bt_osc_32k";
+		#clock-cells = <0>;
+	};
+
+	can_osc_40m: can-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		clock-output-names = "can_osc_40m";
+		#clock-cells = <0>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0
+				      13000 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_fan>;
+		#cooling-cells = <2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_CPU;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usdhc1_pwrseq: pwr-seq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <60>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "CAN_EN";
+		startup-delay-us = <20>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg1pwrgrp>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+
+	reg_vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCC_3V3";
+	};
+};
+
+/* SPI - CAN MCP251XFD */
+&ecspi1 {
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	can0: can@0 {
+		compatible = "microchip,mcp251xfd";
+		clocks = <&can_osc_40m>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		xceiver-supply = <&reg_can_en>;
+	};
+};
+
+/* TPM */
+&ecspi2 {
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0>;
+		spi-max-frequency = <43000000>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "LED_RED", "WDOG_INT", "X_RTC_INT",
+		"", "", "", "RESET_ETHPHY",
+		"CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
+		"USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "",
+		"", "", "BT_REG_ON", "WL_REG_ON",
+		"BT_DEV_WAKE", "BT_HOST_WAKE", "", "",
+		"X_SD2_CD_B", "", "", "",
+		"", "", "", "SD2_RESET_B";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "",
+		"FAN", "miniPCIe_nPERST", "", "",
+		"COEX1", "COEX2";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+		"", "", "", "",
+		"", "ECSPI1_SS0";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* PCIe */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	status = "okay";
+};
+
+&rv3028 {
+	trickle-resistor-ohms = <3000>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* UART - RS232/RS485 */
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* UART - Sterling-LWB Bluetooth */
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&bt_osc_32k>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wakeup";
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
+		max-speed = <2000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>;
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		vddio-supply = <&reg_vcc_3v3>;
+	};
+};
+
+/* UART - console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	over-current-active-low;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+};
+
+/* SDIO - Sterling-LWB Wifi */
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	non-removable;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wlan>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_nvcc_sd2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x00
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x00
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x00
+		>;
+	};
+
+	pinctrl_can_en: can-engrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x00
+		>;
+	};
+
+	pinctrl_can_int: can-intgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x00
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x80
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x80
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x80
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x00
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO    0x80
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI    0x80
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK    0x80
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13      0x00
+		>;
+	};
+
+	pinctrl_fan: fan0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x16
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20        0x1e2
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0x1e2
+		>;
+	};
+
+	pinctrl_leds: leds1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x16
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x16
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x16
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x00
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x12
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x12
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11      0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX	0x00
+			MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B	0x00
+			MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX	0x00
+			MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B	0x00
+		>;
+	};
+
+	pinctrl_uart2_bt: uart2btgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B	0x00
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B	0x00
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX	0x00
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX	0x00
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usbotg1pwrgrp: usbotg1pwrgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x00
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x182
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0xc6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0xc6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0xc6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0xc6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0xc6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x40
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x192
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d2
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d2
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d2
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d2
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d2
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x00
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
new file mode 100644
index 000000000..606967824
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "imx8mm.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MM";
+	compatible = "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_vdd_3v3_s: regulator-vdd-3v3-s {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_S";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+/* Ethernet */
+&fec1 {
+	fsl,magic-packet;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			reg = <0>;
+			reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+/* SPI Flash */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	som_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "WDOG_INT", "X_RTC_INT",
+		"", "", "", "RESET_ETHPHY",
+		"", "", "nENABLE_FLATLINK";
+};
+
+/* I2C1 */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default","gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "nxp,pf8121a";
+		reg = <0x08>;
+
+		regulators {
+			reg_nvcc_sd1: ldo1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "NVCC_SD1 (LDO1)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_nvcc_sd2: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO2)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vcc_enet: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "VCC_ENET_2V5 (LDO3)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdda_1v8: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1500000>;
+				regulator-name = "VDDA_1V8 (LDO4)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-min-microvolt = <1500000>;
+					regulator-suspend-max-microvolt = <1500000>;
+				};
+			};
+
+			reg_soc_vdda_phy: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <400000>;
+				regulator-name = "VDD_SOC_VDDA_PHY_0P8 (BUCK1)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-min-microvolt = <400000>;
+					regulator-suspend-max-microvolt = <400000>;
+				};
+			};
+
+			reg_vdd_gpu_dram: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <1000000>;
+				regulator-name = "VDD_GPU_DRAM (BUCK2)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1000000>;
+					regulator-suspend-min-microvolt = <1000000>;
+				};
+			};
+
+			reg_vdd_vpu: buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <400000>;
+				regulator-name = "VDD_VPU (BUCK3)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdd_mipi: buck4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <900000>;
+				regulator-name = "VDD_MIPI_0P9 (BUCK4)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdd_arm: buck5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <400000>;
+				regulator-name = "VDD_ARM (BUCK5)";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			reg_vdd_1v8: buck6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK6)";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1800000>;
+					regulator-suspend-min-microvolt = <1800000>;
+				};
+			};
+
+			reg_nvcc_dram: buck7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "NVCC_DRAM_1P1V (BUCK7)";
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SNVS_1P8 (VSNVS)";
+			};
+		};
+	};
+
+	sn65dsi83: bridge@2d {
+		compatible = "ti,sn65dsi83";
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sn65dsi83>;
+		reg = <0x2d>;
+		status = "disabled";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+		vcc-supply = <&reg_vdd_3v3_s>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x52>;
+	};
+};
+
+/* EMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	status = "okay";
+};
+
+/* Watchdog */
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x2
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x2
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x90
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x90
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x90
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x90
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x90
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x16
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x16
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x16
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x16
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x16
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x16
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x10
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c0
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x1e0
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x1e0
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c0
+		>;
+	};
+
+	pinctrl_sn65dsi83: sn65dsi83grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x26
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
new file mode 100644
index 000000000..b1f11098d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -0,0 +1,646 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2017-2018 NXP
+ */
+
+#ifndef __DTS_IMX8MM_PINFUNC_H
+#define __DTS_IMX8MM_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0                                   0x028 0x290 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT          0x028 0x290 0x4C0 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                          0x028 0x290 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                       0x028 0x290 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL                                    0x028 0x290 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1                                   0x02C 0x294 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT                                    0x02C 0x294 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                          0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                       0x02C 0x294 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE                                  0x02C 0x294 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2                                   0x030 0x298 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                0x030 0x298 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                              0x030 0x298 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO02_SJC_DE_B                                    0x030 0x298 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3                                   0x034 0x29C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                              0x034 0x29C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                            0x034 0x29C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                              0x034 0x29C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO03_SJC_DONE                                    0x034 0x29C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4                                   0x038 0x2A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                              0x038 0x2A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                            0x038 0x2A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                           0x038 0x2A0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG                            0x038 0x2A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5                                   0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_M4_NMI                                      0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                     0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                       0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG                            0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6                                   0x040 0x2A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ENET1_MDC                                   0x040 0x2A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                       0x040 0x2A8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG                            0x040 0x2A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7                                   0x044 0x2AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ENET1_MDIO                                  0x044 0x2AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_USDHC1_WP                                   0x044 0x2AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                       0x044 0x2AC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG                            0x044 0x2AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8                                   0x048 0x2B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                        0x048 0x2B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                              0x048 0x2B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                           0x048 0x2B0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG                              0x048 0x2B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9                                   0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                       0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                            0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                           0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG                           0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10                                  0x050 0x2B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED             0x050 0x2B8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11                                  0x054 0x2BC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_USB2_OTG_ID                                 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                     0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MM_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                           0x054 0x2BC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS                    0x054 0x2BC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12                                  0x058 0x2C0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                0x058 0x2C0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                            0x058 0x2C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                           0x058 0x2C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0                          0x058 0x2C0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13                                  0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT                                    0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                           0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1                          0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14                                  0x060 0x2C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_USB2_OTG_PWR                                0x060 0x2C8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT                                    0x060 0x2C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                          0x060 0x2C8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2                          0x060 0x2C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15                                  0x064 0x2CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC                                 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT                                    0x064 0x2CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                          0x064 0x2CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB                             0x064 0x2CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ENET_MDC_ENET1_MDC                                     0x068 0x2D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_MDC_GPIO1_IO16                                    0x068 0x2D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO                                   0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MM_IOMUXC_ENET_MDIO_GPIO1_IO17                                   0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                               0x070 0x2D8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18                                    0x070 0x2D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                               0x074 0x2DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD2_ENET1_TX_CLK                                  0x074 0x2DC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19                                    0x074 0x2DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                               0x078 0x2E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20                                    0x078 0x2E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                               0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21                                    0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                         0x080 0x2E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                               0x084 0x2EC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_TXC_ENET1_TX_ER                                   0x084 0x2EC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23                                    0x084 0x2EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                         0x088 0x2F0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                               0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RXC_ENET1_RX_ER                                   0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ENET_RXC_GPIO1_IO25                                    0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                               0x090 0x2F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD0_GPIO1_IO26                                    0x090 0x2F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                               0x094 0x2FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD1_GPIO1_IO27                                    0x094 0x2FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                               0x098 0x300 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD2_GPIO1_IO28                                    0x098 0x300 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                               0x09C 0x304 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ENET_RD3_GPIO1_IO29                                    0x09C 0x304 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK                                     0x0A0 0x308 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0                                      0x0A0 0x308 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4                                    0x0B0 0x318 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3                                 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5                                    0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4                                 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6                                    0x0B8 0x320 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5                                 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7                                    0x0BC 0x324 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6                                 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8                                    0x0C0 0x328 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7                                 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9                                    0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                             0x0C8 0x330 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10                                 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE                               0x0CC 0x334 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11                                  0x0CC 0x334 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B                                   0x0D0 0x338 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12                                    0x0D0 0x338 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK                                     0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CLK_GPIO2_IO13                                     0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                          0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0                               0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD                                     0x0D8 0x340 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_CMD_GPIO2_IO14                                     0x0D8 0x340 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                          0x0D8 0x340 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1                               0x0D8 0x340 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0                                 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_GPIO2_IO15                                   0x0DC 0x344 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                        0x0DC 0x344 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2                             0x0DC 0x344 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1                                 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_GPIO2_IO16                                   0x0E0 0x348 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                            0x0E0 0x348 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3                             0x0E0 0x348 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2                                 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_GPIO2_IO17                                   0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                            0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4                             0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3                                 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_GPIO2_IO18                                   0x0E8 0x350 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                     0x0E8 0x350 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                             0x0EC 0x354 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19                                 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                  0x0EC 0x354 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SD2_WP_USDHC2_WP                                       0x0F0 0x358 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SD2_WP_GPIO2_IO20                                      0x0F0 0x358 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD2_WP_SIM_M_HMASTLOCK                                 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_ALE_RAWNAND_ALE                                   0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK                                   0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0                                     0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_ALE_SIM_M_HPROT0                                  0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                               0x0F8 0x360 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                0x0F8 0x360 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1                                   0x0F8 0x360 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE0_B_SIM_M_HPROT1                                0x0F8 0x360 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                               0x0FC 0x364 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                0x0FC 0x364 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE                               0x0FC 0x364 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2                                   0x0FC 0x364 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE1_B_SIM_M_HPROT2                                0x0FC 0x364 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                               0x100 0x368 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                0x100 0x368 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5                                0x100 0x368 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3                                   0x100 0x368 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE2_B_SIM_M_HPROT3                                0x100 0x368 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                               0x104 0x36C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                0x104 0x36C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6                                0x104 0x36C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4                                   0x104 0x36C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CE3_B_SIM_M_HADDR0                                0x104 0x36C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_CLE_RAWNAND_CLE                                   0x108 0x370 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK                                   0x108 0x370 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7                                  0x108 0x370 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5                                     0x108 0x370 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_CLE_SIM_M_HADDR1                                  0x108 0x370 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_RAWNAND_DATA00                             0x10C 0x374 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0                               0x10C 0x374 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6                                  0x10C 0x374 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA00_SIM_M_HADDR2                               0x10C 0x374 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_RAWNAND_DATA01                             0x110 0x378 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1                               0x110 0x378 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7                                  0x110 0x378 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA01_SIM_M_HADDR3                               0x110 0x378 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_RAWNAND_DATA02                             0x114 0x37C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2                               0x114 0x37C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8                                  0x114 0x37C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA02_SIM_M_HADDR4                               0x114 0x37C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_RAWNAND_DATA03                             0x118 0x380 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3                               0x118 0x380 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9                                  0x118 0x380 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA03_SIM_M_HADDR5                               0x118 0x380 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_RAWNAND_DATA04                             0x11C 0x384 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0                               0x11C 0x384 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0                               0x11C 0x384 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10                                 0x11C 0x384 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA04_SIM_M_HADDR6                               0x11C 0x384 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_RAWNAND_DATA05                             0x120 0x388 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1                               0x120 0x388 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1                               0x120 0x388 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11                                 0x120 0x388 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA05_SIM_M_HADDR7                               0x120 0x388 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_RAWNAND_DATA06                             0x124 0x38C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2                               0x124 0x38C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	                            0x124 0x38C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12                                 0x124 0x38C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA06_SIM_M_HADDR8                               0x124 0x38C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_RAWNAND_DATA07                             0x128 0x390 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3                               0x128 0x390 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3                               0x128 0x390 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_GPIO3_IO13                                 0x128 0x390 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DATA07_SIM_M_HADDR9                               0x128 0x390 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_DQS_RAWNAND_DQS                                   0x12C 0x394 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS                                    0x12C 0x394 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14                                    0x12C 0x394 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_DQS_SIM_M_HADDR10                                 0x12C 0x394 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                 0x130 0x398 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_QSPI_B_DQS                                   0x130 0x398 0x000 0x1 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4                                 0x130 0x398 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B                               0x134 0x39C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK                                   0x138 0x3A0 0x000 0x12 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17                                   0x138 0x3A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WE_B_SIM_M_HADDR13                                0x138 0x3A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD                                   0x13C 0x3A4 0x000 0x2 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18                                   0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_NAND_WP_B_SIM_M_HADDR14                                0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0                                0x140 0x3A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19                                   0x140 0x3A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                  0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_SAI1_TX_DATA1                                 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_PDM_CLK                                       0x144 0x3AC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20                                    0x144 0x3AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2                                0x148 0x3B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0                                    0x148 0x3B0 0x534 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21                                   0x148 0x3B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3                                0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC                                 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1                                    0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22                                   0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2                                    0x150 0x3B8 0x53C 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC                                 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                0x154 0x3BC 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3                                    0x154 0x3BC 0x540 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24                                   0x154 0x3BC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK                                    0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK                                 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_SAI4_MCLK                                    0x158 0x3C0 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25                                   0x158 0x3C0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK                      0x158 0x3C0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC                                 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC                                 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK                          0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0                                    0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXFS_SIM_M_HADDR15                                0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI1_RX_BCLK                                  0x160 0x3C8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SAI5_RX_BCLK                                  0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL                           0x160 0x3C8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1                                     0x160 0x3C8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXC_SIM_M_HADDR16                                 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0                                0x164 0x3CC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0                                0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_PDM_DATA0                                    0x164 0x3CC 0x534 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0                             0x164 0x3CC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2                                    0x164 0x3CC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0                       0x164 0x3CC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD0_SIM_M_HADDR17                                0x164 0x3CC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1                                0x168 0x3D0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1                                0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_PDM_DATA1                                    0x168 0x3D0 0x538 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1                             0x168 0x3D0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3                                    0x168 0x3D0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1                       0x168 0x3D0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD1_SIM_M_HADDR18                                0x168 0x3D0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2                                0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2                                0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_PDM_DATA2                                    0x16C 0x3D4 0x53C 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2                             0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4                                    0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2                       0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD2_SIM_M_HADDR19                                0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3                                0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3                                0x170 0x3D8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_PDM_DATA3                                    0x170 0x3D8 0x540 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3                             0x170 0x3D8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5                                    0x170 0x3D8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3                       0x170 0x3D8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD3_SIM_M_HADDR20                                0x170 0x3D8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4                                0x174 0x3DC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK                                 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK                                 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4                             0x174 0x3DC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6                                    0x174 0x3DC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4                       0x174 0x3DC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD4_SIM_M_HADDR21                                0x174 0x3DC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5                                0x178 0x3E0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0                                0x178 0x3E0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0                                0x178 0x3E0 0x514 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC                                 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MM_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5                             0x178 0x3E0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7                                    0x178 0x3E0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5                       0x178 0x3E0 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD5_SIM_M_HADDR22                                0x178 0x3E0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6                                0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC                                 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC                                 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6                             0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8                                    0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6                       0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD6_SIM_M_HADDR23                                0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7                                0x180 0x3E8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI6_MCLK                                    0x180 0x3E8 0x530 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC                                 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4                                0x180 0x3E8 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7                             0x180 0x3E8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9                                    0x180 0x3E8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7                       0x180 0x3E8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_RXD7_SIM_M_HADDR24                                0x180 0x3E8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC                                 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MM_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC                                 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO                             0x184 0x3EC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10                                   0x184 0x3EC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXFS_SIM_M_HADDR25                                0x184 0x3EC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK                                  0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_SAI5_TX_BCLK                                  0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI                              0x188 0x3F0 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11                                    0x188 0x3F0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXC_SIM_M_HADDR26                                 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0                                0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0                                0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8                             0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12                                   0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8                       0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD0_SIM_M_HADDR27                                0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1                                0x190 0x3F8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1                                0x190 0x3F8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9                             0x190 0x3F8 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13                                   0x190 0x3F8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9                       0x190 0x3F8 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD1_SIM_M_HADDR28                                0x190 0x3F8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2                                0x194 0x3FC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2                                0x194 0x3FC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10                            0x194 0x3FC 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14                                   0x194 0x3FC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10                      0x194 0x3FC 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD2_SIM_M_HADDR29                                0x194 0x3FC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3                                0x198 0x400 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3                                0x198 0x400 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11                            0x198 0x400 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15                                   0x198 0x400 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11                      0x198 0x400 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD3_SIM_M_HADDR30                                0x198 0x400 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4                                0x19C 0x404 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK                                 0x19C 0x404 0x510 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK                                 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12                            0x19C 0x404 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16                                   0x19C 0x404 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12                      0x19C 0x404 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD4_SIM_M_HADDR31                                0x19C 0x404 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5                                0x1A0 0x408 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0                                0x1A0 0x408 0x514 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0                                0x1A0 0x408 0x000 0x2 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13                            0x1A0 0x408 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17                                   0x1A0 0x408 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13                      0x1A0 0x408 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD5_SIM_M_HBURST0                                0x1A0 0x408 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6                                0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC                                 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC                                 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MM_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14                            0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18                                   0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14                      0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD6_SIM_M_HBURST1                                0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7                                0x1A8 0x410 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SAI6_MCLK                                    0x1A8 0x410 0x530 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_TXD7_PDM_CLK                                      0x1A8 0x410 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15                            0x1A8 0x410 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19                                   0x1A8 0x410 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15                      0x1A8 0x410 0x000 0x6 0x0
+#define MX8MM_IOMUXC_SAI1_TXD7_SIM_M_HBURST2                                0x1A8 0x410 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK                                    0x1AC 0x414 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI5_MCLK                                    0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MM_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK                                 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MM_IOMUXC_SAI1_MCLK_PDM_CLK                                      0x1AC 0x414 0x000 0x3 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20                                   0x1AC 0x414 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                 0x1B0 0x418 0x4F4 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX                                  0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX                                  0x1B4 0x41C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                              0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                              0x1B8 0x420 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                              0x1BC 0x424 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                              0x1BC 0x424 0x4F0 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25                                    0x1C0 0x428 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT                               0x1C0 0x428 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26                                   0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_TXD0_TPSMP_CLK                                    0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK                                    0x1C8 0x430 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_SAI5_MCLK                                    0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27                                   0x1C8 0x430 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR                              0x1C8 0x430 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                0x1CC 0x434 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28                                   0x1CC 0x434 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0                                0x1CC 0x434 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK                                      0x1D0 0x438 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                               0x1D0 0x438 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                               0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                               0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                               0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1                                     0x1E0 0x448 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_TXD_TPSMP_HDATA3                                  0x1E0 0x448 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK                                    0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT                                     0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_SAI5_MCLK                                    0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2                                    0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SAI3_MCLK_TPSMP_HDATA4                                 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT                                    0x1E8 0x450 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT                                      0x1E8 0x450 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3                                     0x1E8 0x450 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_TX_TPSMP_HDATA5                                  0x1E8 0x450 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN                                     0x1EC 0x454 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT                                      0x1EC 0x454 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4                                     0x1EC 0x454 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_RX_TPSMP_HDATA6                                  0x1EC 0x454 0x000 0x7 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                           0x1F0 0x458 0x000 0x0 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                0x1F0 0x458 0x000 0x5 0x0
+#define MX8MM_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7                             0x1F0 0x458 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                               0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                               0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                  0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8                               0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                0x1F8 0x460 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                               0x1F8 0x460 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                               0x1F8 0x460 0x504 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                  0x1F8 0x460 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9                               0x1F8 0x460 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                0x1FC 0x464 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                            0x1FC 0x464 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                            0x1FC 0x464 0x500 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                  0x1FC 0x464 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10                              0x1FC 0x464 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                  0x200 0x468 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                             0x200 0x468 0x500 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                             0x200 0x468 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                   0x200 0x468 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11                               0x200 0x468 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                0x204 0x46C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                               0x204 0x46C 0x50C 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                               0x204 0x46C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                 0x204 0x46C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12                              0x204 0x46C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                0x208 0x470 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                               0x208 0x470 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                               0x208 0x470 0x50C 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                 0x208 0x470 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13                              0x208 0x470 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                0x20C 0x474 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                            0x20C 0x474 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                            0x20C 0x474 0x508 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                 0x20C 0x474 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14                              0x20C 0x474 0x000 0x7 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                  0x210 0x478 0x000 0x0 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                             0x210 0x478 0x508 0x1 0x1
+#define MX8MM_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                             0x210 0x478 0x000 0x1 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                  0x210 0x478 0x000 0x5 0x0
+#define MX8MM_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15                               0x210 0x478 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL                                      0x214 0x47C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_ENET1_MDC                                     0x214 0x47C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14                                    0x214 0x47C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SCL_TPSMP_HDATA16                                 0x214 0x47C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA                                      0x218 0x480 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_ENET1_MDIO                                    0x218 0x480 0x4C0 0x1 0x2
+#define MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15                                    0x218 0x480 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C1_SDA_TPSMP_HDATA17                                 0x218 0x480 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL                                      0x21C 0x484 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                          0x21C 0x484 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16                                    0x21C 0x484 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SCL_TPSMP_HDATA18                                 0x21C 0x484 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA                                      0x220 0x488 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                         0x220 0x488 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17                                    0x220 0x488 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C2_SDA_TPSMP_HDATA19                                 0x220 0x488 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL                                      0x224 0x48C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_PWM4_OUT                                      0x224 0x48C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPT2_CLK                                      0x224 0x48C 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18                                    0x224 0x48C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SCL_TPSMP_HDATA20                                 0x224 0x48C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA                                      0x228 0x490 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_PWM3_OUT                                      0x228 0x490 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPT3_CLK                                      0x228 0x490 0x000 0x2 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19                                    0x228 0x490 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C3_SDA_TPSMP_HDATA21                                 0x228 0x490 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL                                      0x22C 0x494 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PWM2_OUT                                      0x22C 0x494 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B                                0x22C 0x494 0x524 0x12 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20                                    0x22C 0x494 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SCL_TPSMP_HDATA22                                 0x22C 0x494 0x000 0x7 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA                                      0x230 0x498 0x000 0x0 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PWM1_OUT                                      0x230 0x498 0x000 0x1 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B                                0x230 0x498 0x528 0x2 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21                                    0x230 0x498 0x000 0x5 0x0
+#define MX8MM_IOMUXC_I2C4_SDA_TPSMP_HDATA23                                 0x230 0x498 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX                                 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_UART1_DTE_TX                                 0x234 0x49C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK                                  0x234 0x49C 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
+#define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX                                 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_UART2_DTE_TX                                 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO                                  0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24                                   0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_RXD_TPSMP_HDATA26                                0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX                                 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART2_TXD_UART2_DTE_RX                                 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MM_IOMUXC_UART2_TXD_ECSPI3_SS0                                   0x240 0x4A8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25                                   0x240 0x4A8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART2_TXD_TPSMP_HDATA27                                0x240 0x4A8 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX                                 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MM_IOMUXC_UART3_RXD_UART3_DTE_TX                                 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                              0x244 0x4AC 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                              0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26                                   0x244 0x4AC 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_RXD_TPSMP_HDATA28                                0x244 0x4AC 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX                                 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART3_TXD_UART3_DTE_RX                                 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                              0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                              0x248 0x4B0 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27                                   0x248 0x4B0 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART3_TXD_TPSMP_HDATA29                                0x248 0x4B0 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX                                 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MM_IOMUXC_UART4_RXD_UART4_DTE_TX                                 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                              0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                              0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MM_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B                               0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28                                   0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_RXD_TPSMP_HDATA30                                0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX                                 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MM_IOMUXC_UART4_TXD_UART4_DTE_RX                                 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                              0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MM_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                              0x250 0x4B8 0x000 0x1 0x0
+#define MX8MM_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B                               0x250 0x4B8 0x528 0x2 0x1
+#define MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29                                   0x250 0x4B8 0x000 0x5 0x0
+#define MX8MM_IOMUXC_UART4_TXD_TPSMP_HDATA31                                0x250 0x4B8 0x000 0x7 0x0
+
+#endif /* __DTS_IMX8MM_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
new file mode 100644
index 000000000..1eb1fe7eb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Protonic Holland
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Protonic PRT8MM";
+	compatible = "prt,prt8mm", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		debug-led0 {
+			label = "DEBUG_LED0";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		debug-led1 {
+			label = "DEBUG_LED1";
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+		};
+	};
+
+	sound-ssm2518 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "ssm2518-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&ssm2518>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	ssm2518: audio-codec@34 {
+		compatible = "adi,ssm2518";
+		reg = <0x34>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		regulator-name = "0V9_CORE";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <980000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf85363";
+		reg = <0x51>;
+	};
+
+	touchscreeen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_NONE>;
+		irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	temp-sense@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "host";
+	disable-over-current;
+	power-active-high;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <100000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: ledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x00
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x00
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_touchscreen: tsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x80
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x80
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x000
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x000
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
new file mode 100644
index 000000000..156d793a0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mm-tqma8mqml.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
+	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				<&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+};
+
+&uart2 {
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	power-active-high;
+	over-current-active-low;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_hub_vbus>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000006>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000006>,
+			   <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000006>;
+	};
+
+	pinctrl_expander: expandergrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
+			   <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
+			   <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
+			   <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
+			   <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
+			   <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
+			   <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
+			   <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
+			   <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
+			   <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
+			   <MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
+			   <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000004>,
+			   <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000004>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000004>,
+			   <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000004>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
+			   <MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
+			   <MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
+			   <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
+			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
+	};
+
+	pinctrl_usb1_connector: usb1-connectorgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
new file mode 100644
index 000000000..b4466a26d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";
+	compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* identical to buck4_reg, but should never change */
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXML_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM / VPU */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82>,
+			   <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82>,
+			   <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000004>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000004>,
+			   <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000004>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x94>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   /* option USDHC3_RESET_B not defined, only in RM */
+			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
new file mode 100644
index 000000000..d64338141
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
+	compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "Heartbeat";
+			gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ethphy {
+	reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+
+		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
+		usb3-sata-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "usb3_sata_sel";
+		};
+
+		som-vselect-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "som_vselect";
+		};
+
+		enet-sel-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "enet_sel";
+		};
+	};
+
+	extcon_usbotg1: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+/* Header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	disable-over-current;
+	extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	disable-over-current;
+	/delete-property/ usb-role-switch;
+	/*
+	 * FIXME: having USB2 enabled hangs the boot just after:
+	 * [    1.943365] ci_hdrc ci_hdrc.1: EHCI Host Controller
+	 * [    1.948287] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
+	 * [    1.971006] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
+	 * [    1.977203] hub 1-0:1.0: USB hub found
+	 * [    1.980987] hub 1-0:1.0: 1 port detected
+	 */
+	status = "disabled";
+};
+
+&pinctrl_fec1 {
+	fsl,pins = <
+		MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+		MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+		MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+		MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+		MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+		MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+		MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+		MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+		MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+		MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+		MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+		MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+		MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+		MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		/* Remove the MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 as not used */
+	>;
+};
+
+&iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x16
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16
+		>;
+	};
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x16
+		>;
+	};
+
+	pinctrl_reg_usb_otg2_vbus: regusbotg2vbusgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x16
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
new file mode 100644
index 000000000..d7830df5b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MM module";
+	compatible = "variscite,var-som-mx8mm", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		   <&gpio1  0 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	/* Resistive touch controller */
+	touchscreen@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restouch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		spi-max-frequency = <1500000>;
+		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <125>;
+		touchscreen-size-x = <4008>;
+		ti,y-min = /bits/ 16 <282>;
+		touchscreen-size-y = <3864>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		ti,keep-vref-on;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-supply = <&reg_eth_phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	/* TODO: configure audio, as of now just put a placeholder */
+	wm8904: codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x13
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x13
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x13
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x13
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x13
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
+		>;
+	};
+
+	pinctrl_reg_eth_phy: regethphygrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x41
+		>;
+	};
+
+	pinctrl_restouch: restouchgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
new file mode 100644
index 000000000..de7f67a4f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_dram";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_1p2";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_1p0";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_0p95";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p8";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@0 {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+
+	pmic@69 {
+		compatible = "mps,mp5416";
+		reg = <0x69>;
+
+		regulators {
+			/* vdd_0p95: DRAM/GPU/VPU */
+			buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microamp = <3800000>;
+				regulator-max-microamp = <6800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_soc */
+			buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microamp = <2200000>;
+				regulator-max-microamp = <5200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_arm */
+			buck3_reg: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microamp = <3800000>;
+				regulator-max-microamp = <6800000>;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microamp = <2200000>;
+				regulator-max-microamp = <5200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_0p9 */
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x19
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
new file mode 100644
index 000000000..3f88c4ad5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw71xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW71xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw71xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
new file mode 100644
index 000000000..0ce60ad9c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000041 /* DIO2 */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIO2 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x141
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
new file mode 100644
index 000000000..4eaf8aabc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso
new file mode 100644
index 000000000..e0768d408
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
new file mode 100644
index 000000000..f6ad1a4b8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
new file mode 100644
index 000000000..c3cd9f2b0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
new file mode 100644
index 000000000..cc0a28722
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
new file mode 100644
index 000000000..641be3af9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw72xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW72xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
new file mode 100644
index 000000000..570992a52
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+		"", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+		"mipi_gpio1", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie@2,3 {
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth1: pcie@5,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000104 /* RS485_TERM */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x40000104 /* RS485 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x40000104 /* RS485_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
new file mode 100644
index 000000000..f3ece4b7f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dtso
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
new file mode 100644
index 000000000..e0768d408
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
new file mode 100644
index 000000000..1f8ea20df
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW73xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
new file mode 100644
index 000000000..3e6404340
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
new file mode 100644
index 000000000..2c71ab985
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
new file mode 100644
index 000000000..6905437ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw73xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW73xx-0x i.MX8MM Development Kit";
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
new file mode 100644
index 000000000..1800c6a4b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	aliases {
+		ethernet1 = &eth1;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+		"", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+		"mipi_gpio1", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie@2,4 {
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth1: pcie@6,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000104 /* RS485_TERM */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x40000104 /* RS485 */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x40000104 /* RS485_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x41
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0xd6
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x140
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
new file mode 100644
index 000000000..ed46d4f3e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -0,0 +1,1181 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7901 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &lan1;
+		ethernet2 = &lan2;
+		ethernet3 = &lan3;
+		ethernet4 = &lan4;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led01_red";
+			gpios = <&leds_gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&leds_gpio 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led02_red";
+			gpios = <&leds_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&leds_gpio 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led03_red";
+			gpios = <&leds_gpio 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&leds_gpio 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led04_red";
+			gpios = <&leds_gpio 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led05_red";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&leds_gpio 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-a {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&leds_gpio 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&leds_gpio 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	regulator-ioexp {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_ioexp>;
+		compatible = "regulator-fixed";
+		regulator-name = "ioexp";
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	regulator-isouart {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_isouart>;
+		compatible = "regulator-fixed";
+		regulator-name = "iso_uart";
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_usb2_vbus";
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wifi";
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		status = "okay";
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
+		"", "uart1_rs232#", "dig1_in", "dig1_out",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "uart3_rs232#", "uart3_rs422#",
+		"uart3_rs485#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
+		"", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&gpu_3d {
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin_aux1";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_aux2";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_0p95";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_arm";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p2";
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	leds_gpio: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		pinctrl-0 = <&pinctrl_ksz>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "rgmii-id";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan3: port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan4: port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&fec1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	status = "disabled";
+};
+
+&pgc_gpumix {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
+	cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	over-current-active-low;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* DIG2_OUT */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* DIG2_IN */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* DIG1_IN */
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x40000041 /* SIM2DET# */
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x40000041 /* SIM1DET# */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* SIM2SEL */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_ksz: kszgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18	0x41
+			MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19	0x41 /* RST# */
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x40000041 /* WDIS# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x41
+		>;
+	};
+
+	pinctrl_reg_isouart: regisouartgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041
+		>;
+	};
+
+	pinctrl_reg_ioexp: regioexpgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x40000041
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x41
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17	0x140
+			MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC	0x140
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x140
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x140
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x140
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x140
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x40000041 /* RS232# */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9	0x140
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x40000110 /* RS232# */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000110 /* RS422# */
+			MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8	0x40000110 /* RS485# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x140
+		>;
+	};
+
+	pinctrl_uart4_gpio: uart4gpiogrp {
+		fsl,pins = <
+
+			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* RS485# */
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
new file mode 100644
index 000000000..b318c2d08
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -0,0 +1,1079 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7902 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
+
+	aliases {
+		ethernet1 = &eth1;
+		usb0 = &usbotg1;
+		usb1 = &usbotg2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	can20m: can20m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can20m";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel1";
+			gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel2";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel3";
+			gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel4";
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel5";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb_usb1_vbus";
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wifi";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&can20m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"uart2_en#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
+		"lte_pwr#", "lte_rst", "lte_int", "",
+		"amp_gpio4", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
+		"", "uart1_term", "uart1_half", "app_gpio2",
+		"mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "mipi_gpio4",
+		"mipi_gpio3", "mipi_gpio2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_4p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth1: pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* RS232/RS485/RS422 selectable */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18       0x40000041 /* LTE_INT */
+			MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17       0x40000041 /* LTE_RST# */
+			MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16       0x40000041 /* LTE_PWR */
+			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12	0x40000041 /* AMP GPIO2 */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11	0x40000041 /* AMP GPIO3 */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20	0x40000041 /* AMP_GPIO4 */
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
+			MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* MIPI_GPIO2 */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* MIPI_GPIO3/PWM2 */
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* MIPI_GPIO4/PWM3 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
+			MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23	0x19
+			MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x19
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x19
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x19
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x141 /* PPS */
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41 /* WLAN_WLON */
+		>;
+	};
+
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK	0xd6
+			MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK	0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC	0xd6
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40
+			MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3	0x140 /* CAN_IRQ# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x82
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x82
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x82
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40 /* SS0 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10	0x140 /* RTS */
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24	0x140 /* CTS */
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x40000110 /* HALF */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25	0x40000110 /* TERM */
+			MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x40000110 /* RS485 */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3_gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41 /* BT_EN# */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x140 /* CTS */
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x140 /* RTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x140 /* CTS */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x140 /* RTS */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x140 /* DTR */
+			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x140 /* DSR */
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x140 /* DCD */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x140 /* RI */
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x140 /* GNSS_PPS */
+			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x141 /* GNSS_GASP */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
new file mode 100644
index 000000000..0e102a12b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -0,0 +1,871 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7903 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
+
+	aliases {
+		ethernet0 = &fec1;
+		usb0 = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led01_red";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led02_red";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led03_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led04_red";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led05_red";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-a {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			rx-internal-delay-ps = <2000>;
+			tx-internal-delay-ps = <2500>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "rs422_en#", "rs485_en#", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
+		"dig1_out#", "dig1_in", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
+		"sim2_det#", "sim2_sel", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232/RS485/RS422 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40000041 /* DIG1_CTL */
+			MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2	0x40000041 /* DIG2_CTL */
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
+			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x40000041 /* SIM2DET# */
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40000041 /* SIM2SEL */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x19
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x19
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x19
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x19
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x19
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x19
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x140
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x140
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x140
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
new file mode 100644
index 000000000..6afbabc89
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -0,0 +1,921 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7904 i.MX8MM board";
+	compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-1 {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-2 {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-3 {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-4 {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led01_yel";
+			gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led02_yel";
+			gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led03_yel";
+			gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led04_yel";
+			gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led05_yel";
+			gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-11 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led07_grn";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-13 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led07_red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-14 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led08_grn";
+			gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-15 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led08_yel";
+			gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-16 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led09_grn";
+			gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-17 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led09_yel";
+			gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-18 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led10_grn";
+			gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-19 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_YELLOW>;
+			label = "led10_yel";
+			gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gpioled: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	cts-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000019
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000019
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26	0x140 /* CTS# in */
+			MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27	0x140 /* RTS# out */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts
new file mode 100644
index 000000000..914753f06
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-venice-gw700x.dtsi"
+#include "imx8mm-venice-gw7905.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit";
+	compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+/* Disable SOM interfaces not used on baseboard */
+&fec1 {
+	status = "disabled";
+};
+
+&usdhc1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
new file mode 100644
index 000000000..5eb920051
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "SD2_3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "gpioa", "gpiob", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "pci_usb_sel",
+		"", "", "", "pci_wdis#",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"gpioc", "gpiod", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel SINK port J14 */
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB:
+ *  P1 - USBC connector (host only)
+ *  P2 - USB2 test connector
+ *  P3 - miniPCIe full card
+ *  P4 - miniPCIe half card
+ */
+&usbotg2 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000040 /* GPIOA */
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x40000040 /* GPIOB */
+			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000106 /* PCI_USBSEL */
+			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000106 /* PCIE_WDIS# */
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000040 /* GPIOD */
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000040 /* GPIOC */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0	0x6	/* LEDG */
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c2
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x106
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x6	/* USBHUB_RST# (ext p/u) */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x140
+			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x140
+			MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x140
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
new file mode 100644
index 000000000..1cff0b829
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound_card: sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mm-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		AVDD-supply = <&reg_3p3v>;
+		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		CPVDD-supply = <&reg_3p3v>;
+		DBVDD-supply = <&reg_3p3v>;
+		DCVDD-supply = <&reg_3p3v>;
+		MICVDD-supply = <&reg_3p3v>;
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
new file mode 100644
index 000000000..3c4b8ca12
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound_card: sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mm-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&gpio_expander_21 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Limit frequency on dev board due to long traces and bad signal integrity */
+&usdhc2 {
+	max-frequency = <100000000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000..d64ff378a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Dahlia Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-dahlia",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000..6ae71ecac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-dev",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000..c71825ecf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Yavia Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-yavia",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
new file mode 100644
index 000000000..1e0f87c7a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_64",
+			  "SODIMM_21",
+			  "SODIMM_206",
+			  "SODIMM_76",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "SODIMM_162",
+			  "SODIMM_164",
+			  "SODIMM_166",
+			  "SODIMM_168",
+			  "SODIMM_66",
+			  "SODIMM_17",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_160",
+			  "SODIMM_244",
+			  "",
+			  "SODIMM_48",
+			  "SODIMM_44",
+			  "SODIMM_42",
+			  "SODIMM_46";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_102",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_100",
+			  "SODIMM_148",
+			  "SODIMM_152",
+			  "SODIMM_154",
+			  "SODIMM_174",
+			  "SODIMM_120",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_108",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_150",
+			  "SODIMM_118",
+			  "",
+			  "SODIMM_88",
+			  "SODIMM_149",
+			  "SODIMM_147",
+			  "SODIMM_36",
+			  "SODIMM_32",
+			  "SODIMM_30",
+			  "SODIMM_34",
+			  "SODIMM_38",
+			  "SODIMM_252",
+			  "SODIMM_133",
+			  "SODIMM_135",
+			  "SODIMM_129";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000..d424c475c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Dahlia Board";
+	compatible = "toradex,verdin-imx8mm-wifi-dahlia",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
new file mode 100644
index 000000000..ef9520218
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mm-wifi-dev",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts
new file mode 100644
index 000000000..fe39de931
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Yavia Board";
+	compatible = "toradex,verdin-imx8mm-wifi-yavia",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
new file mode 100644
index 000000000..017db9eab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "PDn_AW-CM276NF";
+		startup-delay-us = <2000>;
+	};
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_64",
+			  "SODIMM_21",
+			  "SODIMM_206",
+			  "SODIMM_76",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_66",
+			  "SODIMM_17",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_244",
+			  "",
+			  "SODIMM_48",
+			  "SODIMM_44",
+			  "SODIMM_42",
+			  "SODIMM_46";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_102",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_100",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_120",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_108",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "",
+			  "SODIMM_118",
+			  "",
+			  "SODIMM_88",
+			  "SODIMM_149",
+			  "SODIMM_147",
+			  "SODIMM_36",
+			  "SODIMM_32",
+			  "SODIMM_30",
+			  "SODIMM_34",
+			  "SODIMM_38",
+			  "SODIMM_252",
+			  "SODIMM_133",
+			  "SODIMM_135",
+			  "SODIMM_129";
+};
+
+/* On-module Wi-Fi */
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
new file mode 100644
index 000000000..1e28c78e3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-yavia.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_yavia>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin yavia board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios_ext_yavia>;
+};
+
+&hwmon_temp {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_yavia: ledsyaviagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0		0x106	/* SODIMM 52 */
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x106	/* SODIMM 54 */
+			MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x106	/* SODIMM 56 */
+			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x106	/* SODIMM 58 */
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x106	/* SODIMM 60 */
+			MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9	0x106	/* SODIMM 62 */
+		>;
+	};
+
+	pinctrl_gpios_ext_yavia: gpiosextyaviagrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2	0x106	/* SODIMM 64 */
+			MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14	0x106	/* SODIMM 66 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
new file mode 100644
index 000000000..6f0811587
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -0,0 +1,1319 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
+		power-supply = <&reg_3p3v>;
+		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	/* Fixed clock dedicated to SPI CAN controller */
+	clk40m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	hdmi_connector: hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		/* Verdin PWM_3_DSI (SODIMM 19) */
+		hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		label = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		type = "a";
+		status = "disabled";
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		status = "disabled";
+	};
+
+	/* Carrier Board Supplies */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "+V5_SW";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_ethphy: regulator-ethphy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
+		off-on-delay-us = <500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "On-module +V3.3_ETH";
+		startup-delay-us = <200000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_2_EN (SODIMM 185) */
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_2_EN";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use the kernel configuration settings instead */
+		/delete-node/ linux,cma;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+};
+
+/* Verdin CAN_1 (On-module) */
+&ecspi3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	can1: can@0 {
+		compatible = "microchip,mcp251xfd";
+		clocks = <&clk40m>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_int>;
+		reg = <0>;
+		spi-max-frequency = <8500000>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&fec1 {
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_ethphy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_216",
+			  "SODIMM_19",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_220",
+			  "SODIMM_222",
+			  "",
+			  "SODIMM_218",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_185",
+			  "SODIMM_187";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_84",
+			  "SODIMM_78",
+			  "SODIMM_74",
+			  "SODIMM_80",
+			  "SODIMM_82",
+			  "SODIMM_70",
+			  "SODIMM_72";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_131",
+			  "",
+			  "SODIMM_91",
+			  "SODIMM_16",
+			  "SODIMM_15",
+			  "SODIMM_208",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_141",
+			  "SODIMM_143",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_210",
+			  "SODIMM_212",
+			  "SODIMM_151",
+			  "SODIMM_153";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
+};
+
+/* On-module I2C */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		interrupt-parent = <&gpio1>;
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+
+		/*
+		 * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
+		 * behind this PMIC.
+		 */
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "On-module +VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "On-module +VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "On-module +V3.3 (BUCK4)";
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "PWR_1V8_MOCI (BUCK5)";
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "On-module +VDD_DDR (BUCK6)";
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V1.8_SNVS (LDO1)";
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <800000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "On-module +V0.8_SNVS (LDO2)";
+			};
+
+			reg_vdda: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V1.8A (LDO3)";
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+				regulator-name = "On-module +V0.9_MIPI (LDO4)";
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin I2C_1 (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	clock-frequency = <10000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+/* Verdin I2C_3_HDMI N/A */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	gpio_expander_21: gpio-expander@21 {
+		compatible = "nxp,pcal6416";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x21>;
+		vcc-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
+		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x2c>;
+		status = "disabled";
+	};
+
+	/* Current measurement into module VCC */
+	hwmon: hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+		status = "disabled";
+	};
+
+	hdmi_lontium_lt8912: hdmi@48 {
+		compatible = "lontium,lt8912b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x48>;
+		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		/*
+		 * Verdin GPIO_9_DSI
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
+		 */
+		interrupt-parent = <&gpio3>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
+		reg = <0x4a>;
+		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	/* Temperature sensor on carrier board */
+	hwmon_temp: sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+		status = "disabled";
+	};
+
+	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
+	eeprom_display_adapter: eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+		status = "disabled";
+	};
+
+	/* EEPROM on carrier board */
+	eeprom_carrier_board: eeprom@57 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x57>;
+		status = "disabled";
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_1>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_2>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_3>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+	#sound-dai-cells = <0>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+};
+
+/*
+ * Verdin UART_4
+ * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS
+ */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	dr_mode = "host";
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+};
+
+&usbphynop1 {
+	vcc-supply = <&reg_vdd_3v3>;
+};
+
+&usbphynop2 {
+	power-domains = <&pgc_otg2>;
+	vcc-supply = <&reg_vdd_3v3>;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
+		    <&pinctrl_pmic_tpm_ena>;
+
+	pinctrl_can1_int: can1intgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x146>;	/* CAN_1_SPI_INT#_1.8V */
+	};
+
+	pinctrl_can2_int: can2intgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x106>;	/* CAN_2_SPI_INT#_1.8V, unused */
+	};
+
+	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x106>;	/* SODIMM 256 */
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x6>,	/* SODIMM 198 */
+			<MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x6>,	/* SODIMM 200 */
+			<MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x6>,	/* SODIMM 196 */
+			<MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x6>;	/* SODIMM 202 */
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x146>,	/* CAN_2_SPI_CS#_1.8V */
+			<MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x6>,	/* CAN_SPI_SCK_1.8V */
+			<MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x6>,	/* CAN_SPI_MOSI_1.8V */
+			<MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x6>,	/* CAN_SPI_MISO_1.8V */
+			<MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x6>;	/* CAN_1_SPI_CS_1.8V# */
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
+			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
+			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
+			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
+			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
+			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
+			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f>,
+			<MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f>,
+			<MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x146>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
+			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
+			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
+			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
+			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
+			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
+			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18		0x1f>,
+			<MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23		0x1f>,
+			<MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x1f>,
+			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x106>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x106>,	/* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x106>,	/* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B		0x106>,	/* SODIMM 64 */
+			<MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x106>,	/* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x106>,	/* SODIMM 58 */
+			<MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x106>,	/* SODIMM 60 */
+			<MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x106>,	/* SODIMM 62 */
+			<MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x106>;	/* SODIMM 66 */
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x106>;	/* SODIMM 206 */
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5		0x106>;	/* SODIMM 208 */
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26		0x106>;	/* SODIMM 210 */
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27		0x106>;	/* SODIMM 212 */
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x106>;	/* SODIMM 216 */
+	};
+
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x106>;	/* SODIMM 218 */
+	};
+
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x106>;	/* SODIMM 220 */
+	};
+
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x106>;	/* SODIMM 222 */
+	};
+
+	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
+	pinctrl_gpio_9_dsi: gpio9dsigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x146>;	/* SODIMM 17 */
+	};
+
+	/* Verdin GPIO_10_DSI (pulled-up as active-low) */
+	pinctrl_gpio_10_dsi: gpio10dsigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x146>;	/* SODIMM 21 */
+	};
+
+	pinctrl_gpio_hog1: gpiohog1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x106>,	/* SODIMM 88 */
+			<MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x106>,	/* SODIMM 90 */
+			<MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x106>,	/* SODIMM 92 */
+			<MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x106>,	/* SODIMM 94 */
+			<MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x106>,	/* SODIMM 96 */
+			<MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x106>,	/* SODIMM 100 */
+			<MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x106>,	/* SODIMM 102 */
+			<MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x106>,	/* SODIMM 104 */
+			<MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x106>,	/* SODIMM 106 */
+			<MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x106>,	/* SODIMM 108 */
+			<MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x106>,	/* SODIMM 112 */
+			<MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x106>,	/* SODIMM 114 */
+			<MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x106>,	/* SODIMM 116 */
+			<MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x106>,	/* SODIMM 118 */
+			<MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x106>;	/* SODIMM 120 */
+	};
+
+	pinctrl_gpio_hog2: gpiohog2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x106>;	/* SODIMM 91 */
+	};
+
+	pinctrl_gpio_hog3: gpiohog3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x146>,	/* SODIMM 157 */
+			<MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x146>;	/* SODIMM 187 */
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x146>;	/* SODIMM 252 */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000146>,	/* PMIC_I2C_SCL */
+			<MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000146>;	/* PMIC_I2C_SDA */
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x146>,	/* PMIC_I2C_SCL */
+			<MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x146>;	/* PMIC_I2C_SDA */
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000146>,	/* SODIMM 55 */
+			<MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000146>;	/* SODIMM 53 */
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x146>,	/* SODIMM 55 */
+			<MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x146>;	/* SODIMM 53 */
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000146>,	/* SODIMM 95 */
+			<MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000146>;	/* SODIMM 93 */
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x146>,	/* SODIMM 95 */
+			<MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x146>;	/* SODIMM 93 */
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000146>,	/* SODIMM 14 */
+			<MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000146>;	/* SODIMM 12 */
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x146>,	/* SODIMM 14 */
+			<MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x146>;	/* SODIMM 12 */
+	};
+
+	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
+	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x6>;	/* SODIMM 42 */
+	};
+
+	/* Verdin I2S_2_D_OUT shared with SAI5 */
+	pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x6>;	/* SODIMM 46 */
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x6>,	/* SODIMM 244 */
+			/* PMIC_EN_PCIe_CLK, unused */
+			<MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x6>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141>;	/* PMIC_INT# */
+	};
+
+	/* Verdin PWM_3_DSI shared with GPIO1_IO1 */
+	pinctrl_pwm_1: pwm1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x6>;	/* SODIMM 19 */
+	};
+
+	pinctrl_pwm_2: pwm2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x6>;	/* SODIMM 15 */
+	};
+
+	pinctrl_pwm_3: pwm3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x6>;	/* SODIMM 16 */
+	};
+
+	/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */
+	pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x106>;	/* SODIMM 19 */
+	};
+
+	pinctrl_reg_eth: regethgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x146>;	/* PMIC_EN_ETH */
+	};
+
+	pinctrl_reg_usb1_en: regusb1engrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x106>;	/* SODIMM 155 */
+	};
+
+	pinctrl_reg_usb2_en: regusb2engrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x106>;	/* SODIMM 185 */
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0x6>,	/* SODIMM 38 */
+			<MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0x6>,	/* SODIMM 30 */
+			<MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0x6>,	/* SODIMM 32 */
+			<MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0x6>,	/* SODIMM 36 */
+			<MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0x6>;	/* SODIMM 34 */
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0x6>,	/* SODIMM 48 */
+			<MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0x6>,	/* SODIMM 44 */
+			<MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0x6>,	/* SODIMM 42 */
+			<MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0x6>;	/* SODIMM 46 */
+	};
+
+	/* control signal for optional ATTPM20P or SE050 */
+	pinctrl_pmic_tpm_ena: pmictpmenagrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x106>;	/* PMIC_TPM_ENA */
+	};
+
+	pinctrl_tsp: tspgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x6>,	/* SODIMM 148 */
+			<MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x6>,	/* SODIMM 152 */
+			<MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x6>,	/* SODIMM 154 */
+			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x146>,	/* SODIMM 174 */
+			<MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x6>;	/* SODIMM 150 */
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x146>,	/* SODIMM 147 */
+			<MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x146>;	/* SODIMM 149 */
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x146>,	/* SODIMM 133 */
+			<MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x146>,	/* SODIMM 135 */
+			<MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x146>,	/* SODIMM 131 */
+			<MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x146>;	/* SODIMM 129 */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x146>,	/* SODIMM 141 */
+			<MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x146>,	/* SODIMM 139 */
+			<MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x146>,	/* SODIMM 137 */
+			<MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x146>;	/* SODIMM 143 */
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x146>,	/* SODIMM 151 */
+			<MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x146>;	/* SODIMM 153 */
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x6>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x0>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x6>;	/* SODIMM 76 */
+	};
+
+	/*
+	 * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
+	 * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
+	 */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x90>,	/* SODIMM 78 */
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x90>,	/* SODIMM 74 */
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x90>,	/* SODIMM 80 */
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x90>,	/* SODIMM 82 */
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x90>,	/* SODIMM 70 */
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x90>;	/* SODIMM 72 */
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x94>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x94>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x94>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x10>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x96>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x96>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x96>;
+	};
+
+	/* Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x0>,
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x0>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0>;
+	};
+
+	/*
+	 * On-module Wi-Fi/BT or type specific SDHC interface
+	 * (e.g. on X52 extension slot of Verdin Development Board)
+	 */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x150>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x150>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x150>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x150>,
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x150>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x150>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x154>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x154>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x154>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x154>,
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x154>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x154>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x156>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x156>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x156>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x156>,
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x156>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x156>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166>;	/* PMIC_WDI */
+	};
+
+	pinctrl_wifi_ctrl: wifictrlgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x46>,	/* WIFI_WKUP_BT */
+			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x146>,	/* WIFI_W_WKUP_HOST */
+			<MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x46>;	/* WIFI_WKUP_WLAN */
+	};
+
+	pinctrl_wifi_i2s: bti2sgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK		0x6>,	/* WIFI_TX_BCLK */
+			<MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0		0x6>,	/* WIFI_TX_DATA0 */
+			<MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC		0x6>,	/* WIFI_TX_SYNC */
+			<MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0		0x6>;	/* WIFI_RX_DATA0 */
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x6>;	/* PMIC_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
new file mode 100644
index 000000000..54faf83cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -0,0 +1,1490 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8mm-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mm-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MM_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xe>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
+	};
+
+	usbphynop2: usbphynop2 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mm-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+		nvmem-cells = <&imx8mm_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			spba2: spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				sai1: sai@30010000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30010000 0x10000>;
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+						 <&clk IMX8MM_CLK_SAI1_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@30020000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30020000 0x10000>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+						<&clk IMX8MM_CLK_SAI2_ROOT>,
+						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@30030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30030000 0x10000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+						 <&clk IMX8MM_CLK_SAI3_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai5: sai@30050000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30050000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+						 <&clk IMX8MM_CLK_SAI5_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai6: sai@30060000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+					reg = <0x30060000 0x10000>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+						 <&clk IMX8MM_CLK_SAI6_ROOT>,
+						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30080000 {
+					compatible = "fsl,imx8mm-micfil";
+					reg = <0x30080000 0x10000>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
+						 <&clk IMX8MM_CLK_PDM_ROOT>,
+						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MM_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					#sound-dai-cells = <0>;
+					status = "disabled";
+				};
+
+				spdif1: spdif@30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
+				#thermal-sensor-cells = <0>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mm-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				tmu_calib: calib@3c { /* 0x4f0 */
+					reg = <0x3c 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mm-anatop";
+				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx8mm-snvs-lpgpr",
+						     "fsl,imx7d-snvs-lpgpr";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mm-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
+						<&clk IMX8MM_CLK_A53_CORE>,
+						<&clk IMX8MM_CLK_NOC>,
+						<&clk IMX8MM_CLK_AUDIO_AHB>,
+						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MM_SYS_PLL3>,
+						<&clk IMX8MM_VIDEO_PLL1>,
+						<&clk IMX8MM_AUDIO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+							 <&clk IMX8MM_ARM_PLL_OUT>,
+							 <&clk IMX8MM_SYS_PLL3_OUT>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>, <0>,
+							<400000000>,
+							<400000000>,
+							<750000000>,
+							<594000000>,
+							<393216000>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mm-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MM_CLK_USB_BUS>;
+						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+					};
+
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
+						power-domains = <&pgc_hsiomix>;
+						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
+					};
+
+					pgc_gpumix: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU_AHB>;
+						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
+								  <&clk IMX8MM_CLK_GPU_AHB>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
+									 <&clk IMX8MM_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>, <400000000>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
+							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_vpumix: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
+						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
+					};
+
+					pgc_vpu_g1: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
+					};
+
+					pgc_vpu_g2: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
+					};
+
+					pgc_vpu_h1: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
+					};
+
+					pgc_dispmix: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
+								  <&clk IMX8MM_CLK_DISP_APB>;
+						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
+									 <&clk IMX8MM_SYS_PLL1_800M>;
+						assigned-clock-rates = <500000000>, <200000000>;
+					};
+
+					pgc_mipi: power-domain@11 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
+					<&clk IMX8MM_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
+					 <&clk IMX8MM_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
+					 <&clk IMX8MM_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
+					 <&clk IMX8MM_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x8000000 0x8000000 0x10000000>;
+
+			spba1: spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+						 <&clk IMX8MM_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+						 <&clk IMX8MM_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+						 <&clk IMX8MM_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_AHB>,
+					 <&clk IMX8MM_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
+					 <&clk IMX8MM_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
+					 <&clk IMX8MM_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MM_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET_TIMER>,
+					 <&clk IMX8MM_CLK_ENET_REF>,
+					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
+						  <&clk IMX8MM_CLK_ENET_TIMER>,
+						  <&clk IMX8MM_CLK_ENET_REF>,
+						  <&clk IMX8MM_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_SYS_PLL2_100M>,
+							 <&clk IMX8MM_SYS_PLL2_125M>,
+							 <&clk IMX8MM_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MM_CLK_DISP_AXI>,
+						  <&clk IMX8MM_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MM_SYS_PLL2_1000M>,
+							 <&clk IMX8MM_SYS_PLL1_800M>;
+				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_CLK_24M>;
+				assigned-clock-rates = <266000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+				};
+			};
+
+			csi: csi@32e20000 {
+				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
+				reg = <0x32e20000 0x1000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
+				status = "disabled";
+
+				port {
+					csi_in: endpoint {
+						remote-endpoint = <&imx8mm_mipi_csi_out>;
+					};
+				};
+			};
+
+			disp_blk_ctrl: blk-ctrl@32e28000 {
+				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
+				reg = <0x32e28000 0x100>;
+				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+						<&pgc_dispmix>, <&pgc_mipi>,
+						<&pgc_mipi>;
+				power-domain-names = "bus", "csi-bridge",
+						     "lcdif", "mipi-dsi",
+						     "mipi-csi";
+				clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_DISP_ROOT>,
+					 <&clk IMX8MM_CLK_DSI_CORE>,
+					 <&clk IMX8MM_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MM_CLK_CSI1_CORE>,
+					 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
+				clock-names = "csi-bridge-axi","csi-bridge-apb",
+					      "csi-bridge-core", "lcdif-axi",
+					      "lcdif-apb", "lcdif-pix",
+					      "dsi-pclk", "dsi-ref",
+					      "csi-aclk", "csi-pclk";
+				#power-domain-cells = <1>;
+			};
+
+			mipi_csi: mipi-csi@32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_ROOT>,
+					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						imx8mm_mipi_csi_out: endpoint {
+							remote-endpoint = <&csi_in>;
+						};
+					};
+				};
+			};
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+				phys = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_hsiomix>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+
+			usbotg2: usb@32e50000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e50000 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
+				phys = <&usbphynop2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				power-domains = <&pgc_hsiomix>;
+				status = "disabled";
+			};
+
+			usbmisc2: usbmisc@32e50200 {
+				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e50200 0x200>;
+			};
+
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mm-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+				clock-names = "ref";
+				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+				assigned-clock-rates = <100000000>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+				resets = <&src IMX8MQ_RESET_PCIEPHY>;
+				reset-names = "pciephy";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000 {
+			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
+				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mm-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
+		pcie0_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mm-pcie-ep";
+			reg = <0x33800000 0x400000>,
+			      <0x18000000 0x8000000>;
+			reg-names = "dbi", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MM_CLK_PCIE1_PHY>,
+				 <&clk IMX8MM_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
+		gpu_3d: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
+				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+			clock-names = "reg", "bus", "core", "shader";
+			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+					  <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-rates = <0>, <800000000>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		gpu_2d: gpu@38008000 {
+			compatible = "vivante,gc";
+			reg = <0x38008000 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
+			clock-names = "reg", "bus", "core";
+			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+					  <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-rates = <0>, <800000000>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+		};
+
+		vpu_blk_ctrl: blk-ctrl@38330000 {
+			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
+			reg = <0x38330000 0x100>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+					<&pgc_vpu_g2>, <&pgc_vpu_h1>;
+			power-domain-names = "bus", "g1", "g2", "h1";
+			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
+			clock-names = "g1", "g2", "h1";
+			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+					  <&clk IMX8MM_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+						 <&clk IMX8MM_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>,
+					       <600000000>;
+			#power-domain-cells = <1>;
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>, /* GIC Dist */
+			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
+				 <&clk IMX8MM_DRAM_PLL>,
+				 <&clk IMX8MM_CLK_DRAM_ALT>,
+				 <&clk IMX8MM_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
new file mode 100644
index 000000000..16761975f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led3>;
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_camera: regulator-camera {
+		compatible = "regulator-fixed";
+		regulator-name = "mipi_pwr";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "microchip,at25160bn", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <32>;
+		size = <2048>;
+		address-width = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clk IMX8MN_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		AVDD-supply = <&reg_camera>;  /* 2.8v */
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pca6416_0: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&isi {
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x82
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x82
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x82
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x19
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-otggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29     0x19
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX	0x40
+			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX	0x40
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x40
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B	0x41
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK	0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD	0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
new file mode 100644
index 000000000..35b8d2060
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-beacon-som.dtsi"
+#include "imx8mn-beacon-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8M Nano Development Kit";
+	compatible = "beacon,imx8mn-beacon-kit", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+
+	reg_hdmi: regulator-hdmi-dvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		regulator-name = "hdmi_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+
+	sound-hdmi {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sound-hdmi";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai5>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&adv_bridge>;
+		};
+	};
+};
+
+&i2c2 {
+	adv_bridge: hdmi@3d {
+		compatible = "adi,adv7535";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hdmi_bridge>;
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&reg_hdmi>;
+		a2vdd-supply = <&reg_hdmi>;
+		dvdd-supply = <&reg_hdmi>;
+		pvdd-supply = <&reg_hdmi>;
+		v1p2-supply = <&reg_hdmi>;
+		v3p3-supply = <&reg_hdmi>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
+	assigned-clock-rates = <594000000>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&sai5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai5>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hdmi_bridge: hdmibridgegrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_reg_hdmi: reghdmigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11              0x16
+		>;
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK	0xd6
+			MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC	0xd6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
new file mode 100644
index 000000000..90073b165
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
+&a53_opp_table {
+	opp-1200000000 {
+		opp-microvolt = <950000>;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&buck6_reg>;
+	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		max-speed = <4000000>;
+		clock-names = "extclk";
+	};
+};
+
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&buck4_reg>;
+	vqmmc-supply = <&buck5_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
+			MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7	0x19
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x19
+			MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x141
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9		0x111
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
new file mode 100644
index 000000000..22a754d43
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	fec_supply: fec-supply-en {
+		compatible = "regulator-fixed";
+		vin-supply = <&buck4_reg>;
+		regulator-name = "tja1101_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_pwrseq: usdhc2-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
+		reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_espi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&fec_supply>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <2000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	bd71847: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				/* PMIC_BUCK1 - VDD_SOC */
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				/* PMIC_BUCK2 - VDD_ARM */
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				/* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				/* PMIC_BUCK6 - VDD_3V3 */
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				/* PMIC_BUCK7 - VDD_1V8 */
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				/* PMIC_BUCK8 - NVCC_DRAM */
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				/* PMIC_LDO1 - NVCC_SNVS_1V8 */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* PMIC_LDO2 - VDD_SNVS_0V8 */
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/* PMIC_LDO3 - VDDA_1V8 */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/* PMIC_LDO4 - VDD_MIPI_0V9 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* PMIC_LDO6 - VDD_MIPI_1V2 */
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bluetooth>;
+		shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bluetooth: bluetoothgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x044	/* BT_REG_ON */
+			MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18		0x046	/* BT_DEV_WAKE */
+			MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28		0x090	/* BT_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x082
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x082
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x082
+			MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x040
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x002
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x002
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x090
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x090
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER		0x090
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x016
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x016
+			MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x016
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x016
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x090
+			MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER		0x016
+			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12		0x150	/* RMII_INT - ENET_INT */
+			MX8MN_IOMUXC_SD2_WP_GPIO2_IO20			0x150	/* RMII_EN - ENET_EN */
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x016	/* RMII_WAKE - GPIO_ENET_WAKE */
+			MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29		0x016	/* RMII_RESET - GPIO_ENET_RST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL			0x400000c2
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA			0x400000c2
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x040
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX		0x040
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX		0x040
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX		0x040
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x040
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x040
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x090
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x094
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK			0x096
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD			0x0d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x0d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x0d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x0d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x0d6
+		>;
+	};
+
+	pinctrl_usdhc2_pwrseq: usdhc2pwrseqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27		0x040	/* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x046
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x0d6	/* GPIO_0 - WIFI_GPIO_0 */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x0d6	/* GPIO_1 - WIFI_GPIO_1 */
+			MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4		0x0d6	/* BT_GPIO_5 - WIFI_GPIO_5 */
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4			0x0d6	/* I2S_CLK - WIFI_GPIO_6 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
new file mode 100644
index 000000000..7acc5a960
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+
+/ {
+	model = "BSH SMM S2";
+	compatible = "bsh,imx8mn-bsh-smm-s2", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x10000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE		0x00000096
+			MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B		0x00000096
+			MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE		0x00000096
+			MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00		0x00000096
+			MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01		0x00000096
+			MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02		0x00000096
+			MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03		0x00000096
+			MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04		0x00000096
+			MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05		0x00000096
+			MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06		0x00000096
+			MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07		0x00000096
+			MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B		0x00000096
+			MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B	0x00000056
+			MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B		0x00000096
+			MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B		0x00000096
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
new file mode 100644
index 000000000..c6ad65bec
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-bsh-smm-s2-common.dtsi"
+#include <dt-bindings/sound/tlv320aic31xx.h>
+
+/ {
+	model = "BSH SMM S2 PRO";
+	compatible = "bsh,imx8mn-bsh-smm-s2pro", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	sound-tlv320aic31xx {
+		compatible = "fsl,imx-audio-tlv320aic31xx";
+		model = "tlv320aic31xx-hifi";
+		audio-cpu = <&sai3>;
+		audio-codec = <&tlv320dac3101>;
+		audio-asrc = <&easrc>;
+		audio-routing =
+			"Ext Spk", "SPL",
+			"Ext Spk", "SPR";
+		mclk-id = <PLL_CLKIN_BCLK>;
+	};
+
+	vdd_input: vdd_input {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_input";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	fsl,asrc-format = <10>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tlv320dac3101: audio-codec@18 {
+		compatible = "ti,tlv320dac3101";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dac_rst>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&buck4_reg>;
+		SPRVDD-supply = <&vdd_input>;
+		SPLVDD-supply = <&vdd_input>;
+		AVDD-supply = <&buck4_reg>;
+		IOVDD-supply = <&buck4_reg>;
+		DVDD-supply = <&buck5_reg>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		ai31xx-micbias-vg = <MICBIAS_AVDDV>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dac_rst: dacrstgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* DAC_RST */
+		>;
+	};
+
+	pinctrl_espi2: espi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x082
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x082
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x082
+			MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x040
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000090
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d0
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d0
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d0
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d0
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d0
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x090
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000094
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d4
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d4
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d4
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d4
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d4
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x094
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000096
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD			0x0d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x0d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x0d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x0d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x0d6
+			MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x0d6
+			MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x0d6
+			MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x0d6
+			MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x0d6
+			MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x096
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
new file mode 100644
index 000000000..000e2c059
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NXP i.MX8MNano DDR3L EVK board";
+	compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck1>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck1>;
+};
+
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC_0V9";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "VDD_SNVS_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_PHY_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
new file mode 100644
index 000000000..cc2ff59ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+
+/ {
+	model = "NXP i.MX8MNano DDR4 EVK board";
+	compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+		};
+	};
+};
+
+&i2c1 {
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
new file mode 100644
index 000000000..0b71f50d9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NXP i.MX8MNano EVK board";
+	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "VDD_SOC";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <750000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "VDD_ARM_0V9";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "NVCC_DRAM_1V1";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "NVCC_SNVS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "VDD_SNVS_0V8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "VDD_PHY_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "NVCC_SD2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
new file mode 100644
index 000000000..0e60995a5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <12000>;
+		enable-active-high;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_wlf>;
+		wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+		clock-names = "mclk";
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-wm8524 {
+		compatible = "fsl,imx-audio-wm8524";
+		model = "wm8524-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8524>;
+		audio-asrc = <&easrc>;
+		audio-routing =
+			"Line Out Jack", "LINEVOUTL",
+			"Line Out Jack", "LINEVOUTR";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
+};
+
+&easrc {
+	fsl,asrc-rate = <48000>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddio>;
+
+			vddio: vddio-regulator {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <166000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_camera>;
+		clocks = <&clk IMX8MN_CLK_CLKO1>;
+		clock-names = "xclk";
+		assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mn_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&isi {
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		port@0 {
+			imx8mn_mipi_csi_in: endpoint {
+				remote-endpoint = <&ov5640_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7533_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbphynop1 {
+	wakeup-source;
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_camera: cameragrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
+		>;
+	};
+
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
+		>;
+	};
+
+	pinctrl_gpio_wlf: gpiowlfgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0xd6
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13              0x4f
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x1c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x1c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x1c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x1c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x141
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0    0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
+	pinctrl_typec1: typec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x140
+			MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x140
+			MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x140
+			MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x140
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x40000196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h
new file mode 100644
index 000000000..faf1e69e7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h
@@ -0,0 +1,646 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __DTS_IMX8MN_PINFUNC_H
+#define __DTS_IMX8MN_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2                        0x020 0x25C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL                                       0x020 0x25C 0x55C 0x1 0x3
+#define MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3                        0x024 0x260 0x000 0x0 0x0
+#define MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA                                       0x024 0x260 0x56C 0x1 0x3
+#define MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0                                      0x028 0x290 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT             0x028 0x290 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                             0x028 0x290 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                          0x028 0x290 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1                                      0x02C 0x294 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT                                       0x02C 0x294 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                             0x02C 0x294 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                          0x02C 0x294 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_GPIO1_IO2                                      0x030 0x298 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                   0x030 0x298 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                                 0x030 0x298 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3                                      0x034 0x29C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                                 0x034 0x29C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                               0x034 0x29C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                                 0x034 0x29C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4                                      0x038 0x2A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                                 0x038 0x2A0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                               0x038 0x2A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                              0x038 0x2A0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5                                      0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_M4_NMI                                         0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                        0x03C 0x2A4 0x4BC 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                          0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6                                      0x040 0x2A8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_ENET1_MDC                                      0x040 0x2A8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                    0x040 0x2A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                          0x040 0x2A8 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7                                      0x044 0x2AC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_ENET1_MDIO                                     0x044 0x2AC 0x4C0 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_USDHC1_WP                                      0x044 0x2AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                          0x044 0x2AC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8                                      0x048 0x2B0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                           0x048 0x2B0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_PWM1_OUT                                       0x048 0x2B0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                                 0x048 0x2B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                              0x048 0x2B0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9                                      0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                          0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_PWM2_OUT                                       0x04C 0x2B4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_USDHC3_RESET_B                                 0x04C 0x2B4 0x000 0x4 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                               0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                              0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10                                     0x050 0x2B8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                    0x050 0x2B8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO10_PWM3_OUT                                       0x050 0x2B8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11                                     0x054 0x2BC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_PWM2_OUT                                       0x054 0x2BC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_USDHC3_VSELECT                                 0x054 0x2BC 0x000 0x4 0x0
+#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                        0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                              0x054 0x2BC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12                                     0x058 0x2C0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                   0x058 0x2C0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                               0x058 0x2C0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                              0x058 0x2C0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13                                     0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                    0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_PWM2_OUT                                       0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                              0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14                                     0x060 0x2C8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_USDHC3_CD_B                                    0x060 0x2C8 0x598 0x4 0x2
+#define MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT                                       0x060 0x2C8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                             0x060 0x2C8 0x000 0x6 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15                                     0x064 0x2CC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_USDHC3_WP                                      0x064 0x2CC 0x5B8 0x4 0x2
+#define MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT                                       0x064 0x2CC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                             0x064 0x2CC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_ENET_MDC_ENET1_MDC                                        0x068 0x2D0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_MDC_SAI6_TX_DATA0                                    0x068 0x2D0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_MDC_PDM_BIT_STREAM3                                  0x068 0x2D0 0x540 0x3 0x1
+#define MX8MN_IOMUXC_ENET_MDC_SPDIF1_OUT                                       0x068 0x2D0 0x000 0x4 0x0
+#define MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16                                       0x068 0x2D0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_MDC_USDHC3_STROBE                                    0x068 0x2D0 0x59C 0x6 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO                                      0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_SAI6_TX_SYNC                                    0x06C 0x2D4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_MDIO_PDM_BIT_STREAM2                                 0x06C 0x2D4 0x53C 0x3 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_SPDIF1_IN                                       0x06C 0x2D4 0x5CC 0x4 0x1
+#define MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17                                      0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_MDIO_USDHC3_DATA5                                    0x06C 0x2D4 0x550 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                                  0x070 0x2D8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD3_SAI6_TX_BCLK                                     0x070 0x2D8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD3_PDM_BIT_STREAM1                                  0x070 0x2D8 0x538 0x3 0x1
+#define MX8MN_IOMUXC_ENET_TD3_SPDIF1_EXT_CLK                                   0x070 0x2D8 0x568 0x4 0x1
+#define MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18                                       0x070 0x2D8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD3_USDHC3_DATA6                                     0x070 0x2D8 0x584 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                                  0x074 0x2DC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK                                     0x074 0x2DC 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TD2_CCMSRCGPCMIX_ENET_REF_CLK_ROOT                   0x074 0x2DC 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TD2_SAI6_RX_DATA0                                    0x074 0x2DC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD2_PDM_BIT_STREAM3                                  0x074 0x2DC 0x540 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19                                       0x074 0x2DC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD2_USDHC3_DATA7                                     0x074 0x2DC 0x54C 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                                  0x078 0x2E0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD1_SAI6_RX_SYNC                                     0x078 0x2E0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD1_PDM_BIT_STREAM2                                  0x078 0x2E0 0x53C 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20                                       0x078 0x2E0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD1_USDHC3_CD_B                                      0x078 0x2E0 0x598 0x6 0x3
+#define MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                                  0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TD0_SAI6_RX_BCLK                                     0x07C 0x2E4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TD0_PDM_BIT_STREAM1                                  0x07C 0x2E4 0x538 0x3 0x2
+#define MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21                                       0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TD0_USDHC3_WP                                        0x07C 0x2E4 0x5B8 0x6 0x3
+#define MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                            0x080 0x2E8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_SAI6_MCLK                                     0x080 0x2E8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                    0x080 0x2E8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TX_CTL_USDHC3_DATA0                                  0x080 0x2E8 0x5B4 0x6 0x1
+#define MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                                  0x084 0x2EC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER                                      0x084 0x2EC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ENET_TXC_SAI7_TX_DATA0                                    0x084 0x2EC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23                                       0x084 0x2EC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_TXC_USDHC3_DATA1                                     0x084 0x2EC 0x5B0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                            0x088 0x2F0 0x574 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_SAI7_TX_SYNC                                  0x088 0x2F0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_PDM_BIT_STREAM3                               0x088 0x2F0 0x540 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                    0x088 0x2F0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RX_CTL_USDHC3_DATA2                                  0x088 0x2F0 0x5E4 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                                  0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER                                      0x08C 0x2F4 0x5C8 0x1 0x0
+#define MX8MN_IOMUXC_ENET_RXC_SAI7_TX_BCLK                                     0x08C 0x2F4 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RXC_PDM_BIT_STREAM2                                  0x08C 0x2F4 0x53C 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25                                       0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RXC_USDHC3_DATA3                                     0x08C 0x2F4 0x5E0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                                  0x090 0x2F8 0x57C 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD0_SAI7_RX_DATA0                                    0x090 0x2F8 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD0_PDM_BIT_STREAM1                                  0x090 0x2F8 0x538 0x3 0x3
+#define MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26                                       0x090 0x2F8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD0_USDHC3_DATA4                                     0x090 0x2F8 0x558 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                                  0x094 0x2FC 0x554 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD1_SAI7_RX_SYNC                                     0x094 0x2FC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD1_PDM_BIT_STREAM0                                  0x094 0x2FC 0x534 0x3 0x1
+#define MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27                                       0x094 0x2FC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD1_USDHC3_RESET_B                                   0x094 0x2FC 0x000 0x6 0x0
+#define MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                                  0x098 0x300 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD2_SAI7_RX_BCLK                                     0x098 0x300 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD2_PDM_CLK                                          0x098 0x300 0x000 0x3 0x0
+#define MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28                                       0x098 0x300 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD2_USDHC3_CLK                                       0x098 0x300 0x5A0 0x6 0x1
+#define MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                                  0x09C 0x304 0x000 0x0 0x0
+#define MX8MN_IOMUXC_ENET_RD3_SAI7_MCLK                                        0x09C 0x304 0x000 0x2 0x0
+#define MX8MN_IOMUXC_ENET_RD3_SPDIF1_IN                                        0x09C 0x304 0x5CC 0x3 0x5
+#define MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29                                       0x09C 0x304 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ENET_RD3_USDHC3_CMD                                       0x09C 0x304 0x5DC 0x6 0x1
+#define MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK                                        0x0A0 0x308 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_CLK_ENET1_MDC                                         0x0A0 0x308 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_CLK_UART1_DCE_TX                                      0x0A0 0x308 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_CLK_UART1_DTE_RX                                      0x0A0 0x308 0x4F4 0x4 0x4
+#define MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0                                         0x0A0 0x308 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD                                        0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_CMD_ENET1_MDIO                                        0x0A4 0x30C 0x4C0 0x1 0x3
+#define MX8MN_IOMUXC_SD1_CMD_UART1_DCE_RX                                      0x0A4 0x30C 0x4F4 0x4 0x5
+#define MX8MN_IOMUXC_SD1_CMD_UART1_DTE_TX                                      0x0A4 0x30C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1                                         0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0                                    0x0A8 0x310 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_ENET1_RGMII_TD1                                 0x0A8 0x310 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_UART1_DCE_RTS_B                                 0x0A8 0x310 0x4F0 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA0_UART1_DTE_CTS_B                                 0x0A8 0x310 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA0_GPIO2_IO2                                       0x0A8 0x310 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1                                    0x0AC 0x314 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_ENET1_RGMII_TD0                                 0x0AC 0x314 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_UART1_DCE_CTS_B                                 0x0AC 0x314 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA1_UART1_DTE_RTS_B                                 0x0AC 0x314 0x4F0 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3                                       0x0AC 0x314 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2                                    0x0B0 0x318 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_ENET1_RGMII_RD0                                 0x0B0 0x318 0x57C 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA2_UART2_DCE_TX                                    0x0B0 0x318 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA2_UART2_DTE_RX                                    0x0B0 0x318 0x4FC 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA2_GPIO2_IO4                                       0x0B0 0x318 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3                                    0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_ENET1_RGMII_RD1                                 0x0B4 0x31C 0x554 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA3_UART2_DCE_RX                                    0x0B4 0x31C 0x4FC 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA3_UART2_DTE_TX                                    0x0B4 0x31C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA3_GPIO2_IO5                                       0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4                                    0x0B8 0x320 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_ENET1_RGMII_TX_CTL                              0x0B8 0x320 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_I2C1_SCL                                        0x0B8 0x320 0x55C 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA4_UART2_DCE_RTS_B                                 0x0B8 0x320 0x4F8 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA4_UART2_DTE_CTS_B                                 0x0B8 0x320 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6                                       0x0B8 0x320 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5                                    0x0BC 0x324 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_ENET1_TX_ER                                     0x0BC 0x324 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_I2C1_SDA                                        0x0BC 0x324 0x56C 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA5_UART2_DCE_CTS_B                                 0x0BC 0x324 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA5_UART2_DTE_RTS_B                                 0x0BC 0x324 0x4F8 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7                                       0x0BC 0x324 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6                                    0x0C0 0x328 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_ENET1_RGMII_RX_CTL                              0x0C0 0x328 0x574 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA6_I2C2_SCL                                        0x0C0 0x328 0x5D0 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA6_UART3_DCE_TX                                    0x0C0 0x328 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA6_UART3_DTE_RX                                    0x0C0 0x328 0x504 0x4 0x4
+#define MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8                                       0x0C0 0x328 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7                                    0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_ENET1_RX_ER                                     0x0C4 0x32C 0x5C8 0x1 0x1
+#define MX8MN_IOMUXC_SD1_DATA7_I2C2_SDA                                        0x0C4 0x32C 0x560 0x3 0x1
+#define MX8MN_IOMUXC_SD1_DATA7_UART3_DCE_RX                                    0x0C4 0x32C 0x504 0x4 0x5
+#define MX8MN_IOMUXC_SD1_DATA7_UART3_DTE_TX                                    0x0C4 0x32C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9                                       0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                                0x0C8 0x330 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_ENET1_TX_CLK                                  0x0C8 0x330 0x5A4 0x1 0x1
+#define MX8MN_IOMUXC_SD1_RESET_B_CCMSRCGPCMIX_ENET_REF_CLK_ROOT                0x0C8 0x330 0x5A4 0x1 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_I2C3_SCL                                      0x0C8 0x330 0x588 0x3 0x1
+#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DCE_RTS_B                               0x0C8 0x330 0x500 0x4 0x2
+#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DTE_CTS_B                               0x0C8 0x330 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10                                    0x0C8 0x330 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE                                  0x0CC 0x334 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_I2C3_SDA                                       0x0CC 0x334 0x5BC 0x3 0x1
+#define MX8MN_IOMUXC_SD1_STROBE_UART3_DCE_CTS_B                                0x0CC 0x334 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD1_STROBE_UART3_DTE_RTS_B                                0x0CC 0x334 0x500 0x4 0x3
+#define MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11                                     0x0CC 0x334 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B                                      0x0D0 0x338 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12                                       0x0D0 0x338 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CD_B_CCMSRCGPCMIX_TESTER_ACK                          0x0D0 0x338 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK                                        0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CLK_SAI5_RX_SYNC                                      0x0D4 0x33C 0x4E4 0x1 0x1
+#define MX8MN_IOMUXC_SD2_CLK_ECSPI2_SCLK                                       0x0D4 0x33C 0x580 0x2 0x1
+#define MX8MN_IOMUXC_SD2_CLK_UART4_DCE_RX                                      0x0D4 0x33C 0x50C 0x3 0x4
+#define MX8MN_IOMUXC_SD2_CLK_UART4_DTE_TX                                      0x0D4 0x33C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_CLK_SAI5_MCLK                                         0x0D4 0x33C 0x594 0x4 0x1
+#define MX8MN_IOMUXC_SD2_CLK_GPIO2_IO13                                        0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                             0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD                                        0x0D8 0x340 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_CMD_SAI5_RX_BCLK                                      0x0D8 0x340 0x4D0 0x1 0x1
+#define MX8MN_IOMUXC_SD2_CMD_ECSPI2_MOSI                                       0x0D8 0x340 0x590 0x2 0x1
+#define MX8MN_IOMUXC_SD2_CMD_UART4_DCE_TX                                      0x0D8 0x340 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_CMD_UART4_DTE_RX                                      0x0D8 0x340 0x50C 0x3 0x5
+#define MX8MN_IOMUXC_SD2_CMD_PDM_CLK                                           0x0D8 0x340 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SD2_CMD_GPIO2_IO14                                        0x0D8 0x340 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                             0x0D8 0x340 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0                                    0x0DC 0x344 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_SAI5_RX_DATA0                                   0x0DC 0x344 0x4D4 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA0_I2C4_SDA                                        0x0DC 0x344 0x58C 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA0_UART2_DCE_RX                                    0x0DC 0x344 0x4FC 0x3 0x6
+#define MX8MN_IOMUXC_SD2_DATA0_UART2_DTE_TX                                    0x0DC 0x344 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_PDM_BIT_STREAM0                                 0x0DC 0x344 0x534 0x4 0x2
+#define MX8MN_IOMUXC_SD2_DATA0_GPIO2_IO15                                      0x0DC 0x344 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                           0x0DC 0x344 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1                                    0x0E0 0x348 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_SAI5_TX_SYNC                                    0x0E0 0x348 0x4EC 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA1_I2C4_SCL                                        0x0E0 0x348 0x5D4 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA1_UART2_DCE_TX                                    0x0E0 0x348 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_UART2_DTE_RX                                    0x0E0 0x348 0x4FC 0x3 0x7
+#define MX8MN_IOMUXC_SD2_DATA1_PDM_BIT_STREAM1                                 0x0E0 0x348 0x538 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA1_GPIO2_IO16                                      0x0E0 0x348 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                               0x0E0 0x348 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2                                    0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_SAI5_TX_BCLK                                    0x0E4 0x34C 0x4E8 0x1 0x1
+#define MX8MN_IOMUXC_SD2_DATA2_ECSPI2_SS0                                      0x0E4 0x34C 0x570 0x2 0x2
+#define MX8MN_IOMUXC_SD2_DATA2_SPDIF1_OUT                                      0x0E4 0x34C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_PDM_BIT_STREAM2                                 0x0E4 0x34C 0x53C 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA2_GPIO2_IO17                                      0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                               0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3                                    0x0E8 0x350 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_SAI5_TX_DATA0                                   0x0E8 0x350 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_ECSPI2_MISO                                     0x0E8 0x350 0x578 0x2 0x1
+#define MX8MN_IOMUXC_SD2_DATA3_SPDIF1_IN                                       0x0E8 0x350 0x5CC 0x3 0x2
+#define MX8MN_IOMUXC_SD2_DATA3_PDM_BIT_STREAM3                                 0x0E8 0x350 0x540 0x4 0x4
+#define MX8MN_IOMUXC_SD2_DATA3_GPIO2_IO18                                      0x0E8 0x350 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                        0x0E8 0x350 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                                0x0EC 0x354 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19                                    0x0EC 0x354 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                     0x0EC 0x354 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SD2_WP_USDHC2_WP                                          0x0F0 0x358 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SD2_WP_GPIO2_IO20                                         0x0F0 0x358 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SD2_WP_CORESIGHT_EVENTI                                   0x0F0 0x358 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE                                      0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK                                      0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_ALE_PDM_BIT_STREAM0                                  0x0F4 0x35C 0x534 0x3 0x3
+#define MX8MN_IOMUXC_NAND_ALE_UART3_DCE_RX                                     0x0F4 0x35C 0x504 0x4 0x6
+#define MX8MN_IOMUXC_NAND_ALE_UART3_DTE_TX                                     0x0F4 0x35C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_ALE_GPIO3_IO0                                        0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_ALE_CORESIGHT_TRACE_CLK                              0x0F4 0x35C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                                  0x0F8 0x360 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                   0x0F8 0x360 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_PDM_BIT_STREAM1                                0x0F8 0x360 0x538 0x3 0x5
+#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DCE_TX                                   0x0F8 0x360 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DTE_RX                                   0x0F8 0x360 0x504 0x4 0x7
+#define MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1                                      0x0F8 0x360 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE0_B_CORESIGHT_TRACE_CTL                            0x0F8 0x360 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                                  0x0FC 0x364 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                   0x0FC 0x364 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE                                  0x0FC 0x364 0x59C 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_PDM_BIT_STREAM0                                0x0FC 0x364 0x534 0x3 0x4
+#define MX8MN_IOMUXC_NAND_CE1_B_I2C4_SCL                                       0x0FC 0x364 0x5D4 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE1_B_GPIO3_IO2                                      0x0FC 0x364 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE1_B_CORESIGHT_TRACE0                               0x0FC 0x364 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                                  0x100 0x368 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                   0x100 0x368 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5                                   0x100 0x368 0x550 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_PDM_BIT_STREAM1                                0x100 0x368 0x538 0x3 0x6
+#define MX8MN_IOMUXC_NAND_CE2_B_I2C4_SDA                                       0x100 0x368 0x58C 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE2_B_GPIO3_IO3                                      0x100 0x368 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE2_B_CORESIGHT_TRACE1                               0x100 0x368 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                                  0x104 0x36C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                   0x104 0x36C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6                                   0x104 0x36C 0x584 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_PDM_BIT_STREAM2                                0x104 0x36C 0x53C 0x3 0x5
+#define MX8MN_IOMUXC_NAND_CE3_B_I2C3_SDA                                       0x104 0x36C 0x5BC 0x4 0x2
+#define MX8MN_IOMUXC_NAND_CE3_B_GPIO3_IO4                                      0x104 0x36C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CE3_B_CORESIGHT_TRACE2                               0x104 0x36C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE                                      0x108 0x370 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_CLE_QSPI_B_SCLK                                      0x108 0x370 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7                                     0x108 0x370 0x54C 0x2 0x0
+#define MX8MN_IOMUXC_NAND_CLE_GPIO3_IO5                                        0x108 0x370 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_CLE_CORESIGHT_TRACE3                                 0x108 0x370 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00                                0x10C 0x374 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0                                  0x10C 0x374 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_PDM_BIT_STREAM2                               0x10C 0x374 0x53C 0x3 0x6
+#define MX8MN_IOMUXC_NAND_DATA00_UART4_DCE_RX                                  0x10C 0x374 0x50C 0x4 0x6
+#define MX8MN_IOMUXC_NAND_DATA00_UART4_DTE_TX                                  0x10C 0x374 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_GPIO3_IO6                                     0x10C 0x374 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA00_CORESIGHT_TRACE4                              0x10C 0x374 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01                                0x110 0x378 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1                                  0x110 0x378 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_PDM_BIT_STREAM3                               0x110 0x378 0x540 0x3 0x5
+#define MX8MN_IOMUXC_NAND_DATA01_UART4_DCE_TX                                  0x110 0x378 0x000 0x4 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_UART4_DTE_RX                                  0x110 0x378 0x50C 0x4 0x7
+#define MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7                                     0x110 0x378 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA01_CORESIGHT_TRACE5                              0x110 0x378 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02                                0x114 0x37C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2                                  0x114 0x37C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_USDHC3_CD_B                                   0x114 0x37C 0x598 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_I2C4_SDA                                      0x114 0x37C 0x58C 0x4 0x3
+#define MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8                                     0x114 0x37C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA02_CORESIGHT_TRACE6                              0x114 0x37C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03                                0x118 0x380 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3                                  0x118 0x380 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_USDHC3_WP                                     0x118 0x380 0x5B8 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_GPIO3_IO9                                     0x118 0x380 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA03_CORESIGHT_TRACE7                              0x118 0x380 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04                                0x11C 0x384 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_QSPI_B_DATA0                                  0x11C 0x384 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0                                  0x11C 0x384 0x5B4 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_GPIO3_IO10                                    0x11C 0x384 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA04_CORESIGHT_TRACE8                              0x11C 0x384 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05                                0x120 0x388 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_QSPI_B_DATA1                                  0x120 0x388 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1                                  0x120 0x388 0x5B0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_GPIO3_IO11                                    0x120 0x388 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA05_CORESIGHT_TRACE9                              0x120 0x388 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06                                0x124 0x38C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_QSPI_B_DATA2                                  0x124 0x38C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2                                  0x124 0x38C 0x5E4 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_GPIO3_IO12                                    0x124 0x38C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA06_CORESIGHT_TRACE10                             0x124 0x38C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07                                0x128 0x390 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_QSPI_B_DATA3                                  0x128 0x390 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3                                  0x128 0x390 0x5E0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_GPIO3_IO13                                    0x128 0x390 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DATA07_CORESIGHT_TRACE11                             0x128 0x390 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_DQS_RAWNAND_DQS                                      0x12C 0x394 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_DQS_QSPI_A_DQS                                       0x12C 0x394 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_DQS_PDM_CLK                                          0x12C 0x394 0x000 0x3 0x0
+#define MX8MN_IOMUXC_NAND_DQS_I2C3_SCL                                         0x12C 0x394 0x588 0x4 0x2
+#define MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14                                       0x12C 0x394 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_DQS_CORESIGHT_TRACE12                                0x12C 0x394 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                    0x130 0x398 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_QSPI_B_DQS                                      0x130 0x398 0x000 0x1 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4                                    0x130 0x398 0x558 0x2 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_PDM_BIT_STREAM1                                 0x130 0x398 0x538 0x3 0x7
+#define MX8MN_IOMUXC_NAND_RE_B_GPIO3_IO15                                      0x130 0x398 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_RE_B_CORESIGHT_TRACE13                               0x130 0x398 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B                              0x134 0x39C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B                               0x134 0x39C 0x000 0x2 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_PDM_BIT_STREAM3                              0x134 0x39C 0x540 0x3 0x6
+#define MX8MN_IOMUXC_NAND_READY_B_I2C3_SCL                                     0x134 0x39C 0x588 0x4 0x3
+#define MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16                                   0x134 0x39C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_READY_B_CORESIGHT_TRACE14                            0x134 0x39C 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                    0x138 0x3A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK                                      0x138 0x3A0 0x5A0 0x2 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_I2C3_SDA                                        0x138 0x3A0 0x5BC 0x4 0x3
+#define MX8MN_IOMUXC_NAND_WE_B_GPIO3_IO17                                      0x138 0x3A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_WE_B_CORESIGHT_TRACE15                               0x138 0x3A0 0x000 0x6 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                    0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD                                      0x13C 0x3A4 0x5DC 0x2 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_I2C4_SDA                                        0x13C 0x3A4 0x58C 0x4 0x4
+#define MX8MN_IOMUXC_NAND_WP_B_GPIO3_IO18                                      0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_NAND_WP_B_CORESIGHT_EVENTO                                0x13C 0x3A4 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                    0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXFS_GPIO3_IO19                                      0x140 0x3A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                     0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_PDM_CLK                                          0x144 0x3AC 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20                                       0x144 0x3AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                   0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0                                 0x148 0x3B0 0x534 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21                                      0x148 0x3B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                   0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                    0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1                                 0x14C 0x3B4 0x538 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22                                      0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                   0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                    0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2                                 0x150 0x3B8 0x53C 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23                                      0x150 0x3B8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                   0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                   0x154 0x3BC 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3                                 0x154 0x3BC 0x540 0x4 0x0
+#define MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24                                      0x154 0x3BC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK                                       0x158 0x3C0 0x594 0x0 0x0
+#define MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25                                      0x158 0x3C0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                    0x1B0 0x418 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                    0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_DATA1                                   0x1B0 0x418 0x000 0x2 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_DATA1                                   0x1B0 0x418 0x5AC 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                    0x1B0 0x418 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                    0x1B0 0x418 0x4F4 0x4 0x2
+#define MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21                                      0x1B0 0x418 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXFS_PDM_BIT_STREAM2                                 0x1B0 0x418 0x53C 0x6 0x7
+#define MX8MN_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                     0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                     0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_RXC_UART1_DCE_RX                                     0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MN_IOMUXC_SAI2_RXC_UART1_DTE_TX                                     0x1B4 0x41C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22                                       0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXC_PDM_BIT_STREAM1                                  0x1B4 0x41C 0x538 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                   0x1B8 0x420 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                   0x1B8 0x420 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_TX_DATA1                                   0x1B8 0x420 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B                                 0x1B8 0x420 0x4F0 0x4 0x2
+#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B                                 0x1B8 0x420 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23                                      0x1B8 0x420 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_RXD0_PDM_BIT_STREAM3                                 0x1B8 0x420 0x540 0x6 0x7
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                    0x1BC 0x424 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                   0x1BC 0x424 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_DATA1                                   0x1BC 0x424 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B                                 0x1BC 0x424 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B                                 0x1BC 0x424 0x4F0 0x4 0x3
+#define MX8MN_IOMUXC_SAI2_TXFS_GPIO4_IO24                                      0x1BC 0x424 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXFS_PDM_BIT_STREAM2                                 0x1BC 0x424 0x53C 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                     0x1C0 0x428 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                    0x1C0 0x428 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25                                       0x1C0 0x428 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXC_PDM_BIT_STREAM1                                  0x1C0 0x428 0x538 0x6 0x9
+#define MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                   0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                   0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26                                      0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_TXD0_CCMSRCGPCMIX_BOOT_MODE4                         0x1C4 0x42C 0x540 0x6 0x8
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI2_MCLK                                       0x1C8 0x430 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI5_MCLK                                       0x1C8 0x430 0x594 0x1 0x2
+#define MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27                                      0x1C8 0x430 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI2_MCLK_SAI3_MCLK                                       0x1C8 0x430 0x5C0 0x6 0x1
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                    0x1CC 0x434 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                   0x1CC 0x434 0x5F0 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                    0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_DATA1                                   0x1CC 0x434 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_SPDIF1_IN                                       0x1CC 0x434 0x5CC 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28                                      0x1CC 0x434 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXFS_PDM_BIT_STREAM0                                 0x1CC 0x434 0x534 0x6 0x5
+#define MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                     0x1D0 0x438 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_GPT1_CLK                                         0x1D0 0x438 0x5E8 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                     0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_SAI2_RX_DATA1                                    0x1D0 0x438 0x5AC 0x3 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B                                  0x1D0 0x438 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B                                  0x1D0 0x438 0x4F8 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29                                       0x1D0 0x438 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXC_PDM_CLK                                          0x1D0 0x438 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                    0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                    0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                    0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MN_IOMUXC_SAI3_RXD_SAI3_TX_DATA1                                    0x1D4 0x43C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B                                  0x1D4 0x43C 0x4F8 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B                                  0x1D4 0x43C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_GPIO4_IO30                                       0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_RXD_PDM_BIT_STREAM1                                  0x1D4 0x43C 0x538 0x6 0x10
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                    0x1D8 0x440 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                   0x1D8 0x440 0x5EC 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                   0x1D8 0x440 0x4D8 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_DATA1                                   0x1D8 0x440 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                    0x1D8 0x440 0x4FC 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                    0x1D8 0x440 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_GPIO4_IO31                                      0x1D8 0x440 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXFS_PDM_BIT_STREAM3                                 0x1D8 0x440 0x540 0x6 0x9
+#define MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                     0x1DC 0x444 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                    0x1DC 0x444 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                    0x1DC 0x444 0x4DC 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXC_SAI2_TX_DATA1                                    0x1DC 0x444 0x000 0x3 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX                                     0x1DC 0x444 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_UART2_DTE_RX                                     0x1DC 0x444 0x4FC 0x4 0x3
+#define MX8MN_IOMUXC_SAI3_TXC_GPIO5_IO0                                        0x1DC 0x444 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXC_PDM_BIT_STREAM2                                  0x1DC 0x444 0x53C 0x6 0x9
+#define MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                    0x1E0 0x448 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                    0x1E0 0x448 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                    0x1E0 0x448 0x4E0 0x2 0x1
+#define MX8MN_IOMUXC_SAI3_TXD_SPDIF1_EXT_CLK                                   0x1E0 0x448 0x568 0x4 0x2
+#define MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1                                        0x1E0 0x448 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_TXD_CCMSRCGPCMIX_BOOT_MODE5                          0x1E0 0x448 0x000 0x6 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK                                       0x1E4 0x44C 0x5C0 0x0 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_PWM4_OUT                                        0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SAI5_MCLK                                       0x1E4 0x44C 0x594 0x2 0x3
+#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_OUT                                      0x1E4 0x44C 0x000 0x4 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2                                       0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_IN                                       0x1E4 0x44C 0x5CC 0x6 0x4
+#define MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT                                       0x1E8 0x450 0x000 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_TX_PWM3_OUT                                         0x1E8 0x450 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3                                        0x1E8 0x450 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN                                        0x1EC 0x454 0x5CC 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_PWM2_OUT                                         0x1EC 0x454 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4                                        0x1EC 0x454 0x000 0x5 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                              0x1F0 0x458 0x568 0x0 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                    0x1F0 0x458 0x000 0x1 0x0
+#define MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                   0x1F0 0x458 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                   0x1F4 0x45C 0x5D8 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                                  0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                                  0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SCLK_I2C1_SCL                                      0x1F4 0x45C 0x55C 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_SCLK_SAI5_RX_SYNC                                  0x1F4 0x45C 0x4DC 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                     0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                   0x1F8 0x460 0x5A8 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                                  0x1F8 0x460 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                                  0x1F8 0x460 0x504 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI1_MOSI_I2C1_SDA                                      0x1F8 0x460 0x56C 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_MOSI_SAI5_RX_BCLK                                  0x1F8 0x460 0x4D0 0x3 0x3
+#define MX8MN_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                     0x1F8 0x460 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                   0x1FC 0x464 0x5C4 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                               0x1FC 0x464 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                               0x1FC 0x464 0x500 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_MISO_I2C2_SCL                                      0x1FC 0x464 0x5D0 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_MISO_SAI5_RX_DATA0                                 0x1FC 0x464 0x4D4 0x3 0x3
+#define MX8MN_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                     0x1FC 0x464 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                     0x200 0x468 0x564 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                                0x200 0x468 0x500 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                                0x200 0x468 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI1_SS0_I2C2_SDA                                       0x200 0x468 0x560 0x2 0x2
+#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_RX_DATA1                                  0x200 0x468 0x4D8 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_TX_SYNC                                   0x200 0x468 0x4EC 0x4 0x3
+#define MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                      0x200 0x468 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                   0x204 0x46C 0x580 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                                  0x204 0x46C 0x50C 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                                  0x204 0x46C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_I2C3_SCL                                      0x204 0x46C 0x588 0x2 0x4
+#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_RX_DATA2                                 0x204 0x46C 0x000 0x3 0x0
+#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_TX_BCLK                                  0x204 0x46C 0x4E8 0x4 0x3
+#define MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                    0x204 0x46C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                   0x208 0x470 0x590 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                                  0x208 0x470 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                                  0x208 0x470 0x50C 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI2_MOSI_I2C3_SDA                                      0x208 0x470 0x5BC 0x2 0x4
+#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_RX_DATA3                                 0x208 0x470 0x4E0 0x3 0x2
+#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_TX_DATA0                                 0x208 0x470 0x000 0x4 0x0
+#define MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                    0x208 0x470 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                   0x20C 0x474 0x578 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                               0x20C 0x474 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                               0x20C 0x474 0x508 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_MISO_I2C4_SCL                                      0x20C 0x474 0x5D4 0x2 0x3
+#define MX8MN_IOMUXC_ECSPI2_MISO_SAI5_MCLK                                     0x20C 0x474 0x594 0x3 0x4
+#define MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                    0x20C 0x474 0x000 0x5 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                     0x210 0x478 0x570 0x0 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                                0x210 0x478 0x508 0x1 0x1
+#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                                0x210 0x478 0x000 0x1 0x0
+#define MX8MN_IOMUXC_ECSPI2_SS0_I2C4_SDA                                       0x210 0x478 0x58C 0x2 0x5
+#define MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                     0x210 0x478 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL                                         0x214 0x47C 0x55C 0x0 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_ENET1_MDC                                        0x214 0x47C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C1_SCL_ECSPI1_SCLK                                      0x214 0x47C 0x5D8 0x3 0x1
+#define MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14                                       0x214 0x47C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA                                         0x218 0x480 0x56C 0x0 0x0
+#define MX8MN_IOMUXC_I2C1_SDA_ENET1_MDIO                                       0x218 0x480 0x4C0 0x1 0x2
+#define MX8MN_IOMUXC_I2C1_SDA_ECSPI1_MOSI                                      0x218 0x480 0x5A8 0x3 0x1
+#define MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15                                       0x218 0x480 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL                                         0x21C 0x484 0x5D0 0x0 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                             0x21C 0x484 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C2_SCL_USDHC3_CD_B                                      0x21C 0x484 0x598 0x2 0x1
+#define MX8MN_IOMUXC_I2C2_SCL_ECSPI1_MISO                                      0x21C 0x484 0x5C4 0x3 0x1
+#define MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16                                       0x21C 0x484 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA                                         0x220 0x488 0x560 0x0 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                            0x220 0x488 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C2_SDA_USDHC3_WP                                        0x220 0x488 0x5B8 0x2 0x1
+#define MX8MN_IOMUXC_I2C2_SDA_ECSPI1_SS0                                       0x220 0x488 0x564 0x3 0x1
+#define MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17                                       0x220 0x488 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL                                         0x224 0x48C 0x588 0x0 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_PWM4_OUT                                         0x224 0x48C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_GPT2_CLK                                         0x224 0x48C 0x000 0x2 0x0
+#define MX8MN_IOMUXC_I2C3_SCL_ECSPI2_SCLK                                      0x224 0x48C 0x580 0x3 0x2
+#define MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18                                       0x224 0x48C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA                                         0x228 0x490 0x5BC 0x0 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_PWM3_OUT                                         0x228 0x490 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_GPT3_CLK                                         0x228 0x490 0x000 0x2 0x0
+#define MX8MN_IOMUXC_I2C3_SDA_ECSPI2_MOSI                                      0x228 0x490 0x590 0x3 0x2
+#define MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19                                       0x228 0x490 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL                                         0x22C 0x494 0x5D4 0x0 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_PWM2_OUT                                         0x22C 0x494 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C4_SCL_ECSPI2_MISO                                      0x22C 0x494 0x578 0x3 0x2
+#define MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20                                       0x22C 0x494 0x000 0x5 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA                                         0x230 0x498 0x58C 0x0 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_PWM1_OUT                                         0x230 0x498 0x000 0x1 0x0
+#define MX8MN_IOMUXC_I2C4_SDA_ECSPI2_SS0                                       0x230 0x498 0x570 0x3 0x1
+#define MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21                                       0x230 0x498 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX                                    0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MN_IOMUXC_UART1_RXD_UART1_DTE_TX                                    0x234 0x49C 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART1_RXD_ECSPI3_SCLK                                     0x234 0x49C 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART1_RXD_GPIO5_IO22                                      0x234 0x49C 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX                                    0x238 0x4A0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART1_TXD_UART1_DTE_RX                                    0x238 0x4A0 0x4F4 0x0 0x1
+#define MX8MN_IOMUXC_UART1_TXD_ECSPI3_MOSI                                     0x238 0x4A0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23                                      0x238 0x4A0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX                                    0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MN_IOMUXC_UART2_RXD_UART2_DTE_TX                                    0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART2_RXD_ECSPI3_MISO                                     0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART2_RXD_GPT1_COMPARE3                                   0x23C 0x4A4 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24                                      0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX                                    0x240 0x4A8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART2_TXD_UART2_DTE_RX                                    0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MN_IOMUXC_UART2_TXD_ECSPI3_SS0                                      0x240 0x4A8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART2_TXD_GPT1_COMPARE2                                   0x240 0x4A8 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25                                      0x240 0x4A8 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX                                    0x244 0x4AC 0x504 0x0 0x2
+#define MX8MN_IOMUXC_UART3_RXD_UART3_DTE_TX                                    0x244 0x4AC 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                                 0x244 0x4AC 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                                 0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MN_IOMUXC_UART3_RXD_USDHC3_RESET_B                                  0x244 0x4AC 0x000 0x2 0x0
+#define MX8MN_IOMUXC_UART3_RXD_GPT1_CAPTURE2                                   0x244 0x4AC 0x5EC 0x3 0x1
+#define MX8MN_IOMUXC_UART3_RXD_GPIO5_IO26                                      0x244 0x4AC 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX                                    0x248 0x4B0 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART3_TXD_UART3_DTE_RX                                    0x248 0x4B0 0x504 0x0 0x3
+#define MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                                 0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MN_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                                 0x248 0x4B0 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART3_TXD_USDHC3_VSELECT                                  0x248 0x4B0 0x000 0x2 0x0
+#define MX8MN_IOMUXC_UART3_TXD_GPT1_CLK                                        0x248 0x4B0 0x5E8 0x3 0x1
+#define MX8MN_IOMUXC_UART3_TXD_GPIO5_IO27                                      0x248 0x4B0 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX                                    0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MN_IOMUXC_UART4_RXD_UART4_DTE_TX                                    0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                                 0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                                 0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MN_IOMUXC_UART4_RXD_GPT1_COMPARE1                                   0x24C 0x4B4 0x000 0x3 0x0
+#define MX8MN_IOMUXC_UART4_RXD_GPIO5_IO28                                      0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX                                    0x250 0x4B8 0x000 0x0 0x0
+#define MX8MN_IOMUXC_UART4_TXD_UART4_DTE_RX                                    0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MN_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                                 0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MN_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                                 0x250 0x4B8 0x000 0x1 0x0
+#define MX8MN_IOMUXC_UART4_TXD_GPT1_CAPTURE1                                   0x250 0x4B8 0x5F0 0x3 0x1
+#define MX8MN_IOMUXC_UART4_TXD_GPIO5_IO29                                      0x250 0x4B8 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MN_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
new file mode 100644
index 000000000..3f1e49bfe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mn-tqma8mqnl.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
+	compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+/* Located on TQMa8MxML-ADAP */
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0hub_sel>;
+
+	sel-usb-hub-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		 <&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		 <&clk IMX8MN_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	power-active-high;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000146>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000146>,
+			   <MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000146>;
+	};
+
+	pinctrl_expander2: expander2grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MN_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,
+			   <MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,
+			   <MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,
+			   <MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,
+			   <MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,
+			   <MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,
+			   <MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,
+			   <MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,
+			   <MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,
+			   <MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,
+			   <MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001C4>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17		0x400001C4>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001C4>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18		0x400001C4>,
+			   <MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19		0x400001C4>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,
+			   <MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,
+			   <MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,
+			   <MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;
+	};
+
+	pinctrl_usb0hub_sel: usb0hub-selgrp {
+		/* SEL_USB_HUB_B */
+		fsl,pins = <MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1		0x84>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>,
+			   <MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID		0x1C4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			   <MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			   <MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
new file mode 100644
index 000000000..391ca5516
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MN TQMa8MxNL";
+	compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXNL_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MXNL_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 .. 0.95 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_SNVS */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V9_MIPI */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/*
+ * Attention:
+ * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
+ * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
+ */
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x84>,
+			   <MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x84>,
+			   <MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x84>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c4>,
+			   <MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c4>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c4>,
+			   <MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c4>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x84>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,
+			   <MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,
+			   <MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,
+			   <MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,
+			   <MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
new file mode 100644
index 000000000..a7a57442c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Supports Symphony evaluation board versions >= 1.4a.
+ *
+ * Copyright 2019-2020 Variscite Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mn-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
+	compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-back {
+			label = "Back";
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key-home {
+			label = "Home";
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key-menu {
+			label = "Menu";
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "Heartbeat";
+			gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ethphy {
+	reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		wakeup-source;
+
+		/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
+		usb3-sata-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "usb3_sata_sel";
+		};
+
+		som-vselect-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "som_vselect";
+		};
+
+		enet-sel-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "enet_sel";
+		};
+	};
+
+	/*
+	 * For Symphony board version <= 1.4, the PTN5150 IRQ pin is connected
+	 * to GPIO1_IO11 on the SoM (R106 present, R132 absent). From Symphony
+	 * board version >= 1.4a, the PTN5150 ID pin is connected to GPIO1_IO11
+	 * on the SoM (R106 absent, R132 present).
+	 */
+	extcon_usbotg1: typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5150>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+/* Header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4		0x16
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pca9534: pca9534grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16
+		>;
+	};
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x16
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
new file mode 100644
index 000000000..b8946edf3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2019-2020 Variscite Ltd.
+ * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-MX8MN module";
+	compatible = "variscite,var-som-mx8mn", "fsl,imx8mn";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	reg_eth_phy: regulator-eth-phy {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth_phy>;
+		regulator-name = "eth_phy_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <20000>;
+		gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		   <&gpio1  0 GPIO_ACTIVE_LOW>;
+	/delete-property/ dmas;
+	/delete-property/ dma-names;
+	status = "okay";
+
+	/* Resistive touch controller */
+	touchscreen@0 {
+		reg = <0>;
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_restouch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+		spi-max-frequency = <1500000>;
+		pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+
+		ti,x-min = /bits/ 16 <125>;
+		touchscreen-size-x = <4008>;
+		ti,y-min = /bits/ 16 <282>;
+		touchscreen-size-y = <3864>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		touchscreen-max-pressure = <255>;
+		touchscreen-average-samples = <10>;
+		ti,debounce-tol = /bits/ 16 <3>;
+		ti,debounce-rep = /bits/ 16 <1>;
+		ti,settle-delay-usec = /bits/ 16 <150>;
+		ti,keep-vref-on;
+		wakeup-source;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-supply = <&reg_eth_phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@4 { /* AR8033 or ADIN1300 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			/*
+			 * Deassert delay:
+			 * ADIN1300 requires 5ms.
+			 * AR8033   requires 1ms.
+			 */
+			reset-deassert-us = <20000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom_som: eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	/* TODO: configure audio, as of now just put a placeholder */
+	wm8904: codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MN_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+/* WIFI */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x13
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x13
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x13
+			MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x13
+			MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x13
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
+		>;
+	};
+
+	pinctrl_fec1_sleep: fec1sleepgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16		0x120
+			MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17		0x120
+			MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18		0x120
+			MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19		0x120
+			MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20		0x120
+			MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21		0x120
+			MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29		0x120
+			MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28		0x120
+			MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27		0x120
+			MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26		0x120
+			MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23		0x120
+			MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25		0x120
+			MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24		0x120
+			MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x120
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x120
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
+		>;
+	};
+
+	pinctrl_reg_eth_phy: regethphygrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9	0x41
+		>;
+	};
+
+	pinctrl_restouch: restouchgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x1c0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX	0x140
+			MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
+			MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
+			MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
+			MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
+			MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
+			MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+			MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
new file mode 100644
index 000000000..08746fb82
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -0,0 +1,1010 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "imx8mn.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7902 i.MX8MN board";
+	compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
+
+	aliases {
+		usb0 = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	can20m: can20m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+		clock-output-names = "can20m";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel1";
+			gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel2";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel3";
+			gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel4";
+			gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "panel5";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-name = "usb_usb1_vbus";
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wifi";
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		clocks = <&can20m>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"m2_pwr_en", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"uart2_en#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "app_gpio1", "vdd_4p0_en", "uart1_rs485",
+		"", "uart1_term", "uart1_half", "app_gpio2",
+		"mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "mipi_gpio4",
+		"mipi_gpio3", "mipi_gpio2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpu {
+	status = "disabled";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vin_4p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pgc_gpumix {
+	status = "disabled";
+};
+
+/* off-board header */
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+/* RS232/RS485/RS422 selectable */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
+	status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LTE Cat M1/NB1/EGPRS modem or GPS (loading option) */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
+			MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x40000041 /* M2_PWR_EN */
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
+			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
+			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
+			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
+			MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22	0x40000041 /* VDD_4P0_EN */
+			MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27	0x40000041 /* APP GPIO2 */
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* UART2_EN# */
+			MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x40000041 /* MIPI_GPIO1 */
+			MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x40000041 /* MIPI_GPIO2 */
+			MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4		0x40000041 /* MIPI_GPIO3/PWM2 */
+			MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* MIPI_GPIO4/PWM3 */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19 /* RST# */
+			MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x19 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6	0x40
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16	0x400001c3
+			MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18	0x400001c3
+			MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL		0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20	0x400001c3
+			MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21	0x19
+			MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23	0x19
+			MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x19
+			MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20	0x19
+			MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x19
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x141 /* PPS */
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41 /* WLAN_WLON */
+		>;
+	};
+
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7	0x41
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK	0xd6
+			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK	0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0	0xd6
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC	0xd6
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+			MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40
+			MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3	0x140 /* CAN_IRQ# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x82
+			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x82
+			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x82
+			MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0x40 /* SS0 */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart1_gpio: uart1gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x40000110 /* HALF */
+			MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25	0x40000110 /* TERM */
+			MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23	0x40000110 /* RS485 */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3_gpiogrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41 /* BT_EN# */
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
+			MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
+			MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0		0x140 /* CTS */
+			MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1		0x140 /* RTS */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX	0x140
+			MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
+			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x141 /* GNSS_GASP */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
new file mode 100644
index 000000000..1bb1d0c1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -0,0 +1,1320 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mn-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MN_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0xb00>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x300>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x100>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mn-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+		nvmem-cells = <&imx8mn_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba2: spba-bus@30000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30000000 0x100000>;
+				ranges;
+
+				sai2: sai@30020000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30020000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI2_IPG>,
+						<&clk IMX8MN_CLK_DUMMY>,
+						<&clk IMX8MN_CLK_SAI2_ROOT>,
+						<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@30030000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30030000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI3_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI3_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai5: sai@30050000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30050000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI5_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI5_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					fsl,shared-interrupt;
+					fsl,dataline = <0 0xf 0xf>;
+					status = "disabled";
+				};
+
+				sai6: sai@30060000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x30060000  0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI6_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI6_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				micfil: audio-controller@30080000 {
+					compatible = "fsl,imx8mm-micfil";
+					reg = <0x30080000 0x10000>;
+					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_PDM_IPG>,
+						 <&clk IMX8MN_CLK_PDM_ROOT>,
+						 <&clk IMX8MN_AUDIO_PLL1_OUT>,
+						 <&clk IMX8MN_AUDIO_PLL2_OUT>,
+						 <&clk IMX8MN_CLK_EXT3>;
+					clock-names = "ipg_clk", "ipg_clk_app",
+						      "pll8k", "pll11k", "clkext3";
+					dmas = <&sdma2 24 25 0x80000000>;
+					dma-names = "rx";
+					#sound-dai-cells = <0>;
+					status = "disabled";
+				};
+
+				spdif1: spdif@30090000 {
+					compatible = "fsl,imx35-spdif";
+					reg = <0x30090000 0x10000>;
+					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */
+						 <&clk IMX8MN_CLK_24M>, /* rxtx0 */
+						 <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */
+						 <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */
+						 <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */
+						 <&clk IMX8MN_CLK_DUMMY>; /* spba */
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "spba";
+					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai7: sai@300b0000 {
+					compatible = "fsl,imx8mn-sai", "fsl,imx8mq-sai";
+					reg = <0x300b0000 0x10000>;
+					#sound-dai-cells = <0>;
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SAI7_IPG>,
+						 <&clk IMX8MN_CLK_DUMMY>,
+						 <&clk IMX8MN_CLK_SAI7_ROOT>,
+						 <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				easrc: easrc@300c0000 {
+					compatible = "fsl,imx8mn-easrc";
+					reg = <0x300c0000 0x10000>;
+					interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ASRC_ROOT>;
+					clock-names = "mem";
+					dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>,
+					       <&sdma2 18 23 0> , <&sdma2 19 23 0>,
+					       <&sdma2 20 23 0> , <&sdma2 21 23 0>,
+					       <&sdma2 22 23 0> , <&sdma2 23 23 0>;
+					dma-names = "ctx0_rx", "ctx0_tx",
+						    "ctx1_rx", "ctx1_tx",
+						    "ctx2_rx", "ctx2_tx",
+						    "ctx3_rx", "ctx3_tx";
+					firmware-name = "imx/easrc/easrc-imx8mn.bin";
+					fsl,asrc-rate = <8000>;
+					fsl,asrc-format = <2>;
+					status = "disabled";
+				};
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 21 108 11>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
+				#thermal-sensor-cells = <0>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MN_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MN_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mn-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mn-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mn_uid: unique-id@4 { /* 0x410-0x420 */
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				tmu_calib: calib@3c { /* 0x4f0 */
+					reg = <0x3c 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mn-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>,
+						<&clk IMX8MN_CLK_A53_CORE>,
+						<&clk IMX8MN_CLK_NOC>,
+						<&clk IMX8MN_CLK_AUDIO_AHB>,
+						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MN_SYS_PLL3>,
+						<&clk IMX8MN_AUDIO_PLL1>,
+						<&clk IMX8MN_AUDIO_PLL2>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
+							 <&clk IMX8MN_ARM_PLL_OUT>,
+							 <&clk IMX8MN_SYS_PLL3_OUT>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>, <0>, <0>,
+							<400000000>,
+							<400000000>,
+							<600000000>,
+							<393216000>,
+							<361267200>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mn-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MN_CLK_USB_BUS>;
+					};
+
+					pgc_otg1: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+					};
+
+					pgc_gpumix: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_SHADER>,
+							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_AHB>;
+					};
+
+					pgc_dispmix: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+					};
+
+					pgc_mipi: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+						power-domains = <&pgc_dispmix>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
+					<&clk IMX8MN_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
+					 <&clk IMX8MN_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
+					 <&clk IMX8MN_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
+					 <&clk IMX8MN_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba1: spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30800000 0x100000>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MN_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
+						 <&clk IMX8MN_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
+						 <&clk IMX8MN_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
+						 <&clk IMX8MN_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_AHB>,
+					 <&clk IMX8MN_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x1000 0x1000>;
+					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					 status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x2000 0x1000>;
+					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					 compatible = "fsl,sec-v4.0-job-ring";
+					 reg = <0x3000 0x1000>;
+					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_UART4_ROOT>,
+					 <&clk IMX8MN_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
+					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+					 <&clk IMX8MN_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MN_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mn-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET1_ROOT>,
+					 <&clk IMX8MN_CLK_ENET_TIMER>,
+					 <&clk IMX8MN_CLK_ENET_REF>,
+					 <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
+						  <&clk IMX8MN_CLK_ENET_TIMER>,
+						  <&clk IMX8MN_CLK_ENET_REF>,
+						  <&clk IMX8MN_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_SYS_PLL2_100M>,
+							 <&clk IMX8MN_SYS_PLL2_125M>,
+							 <&clk IMX8MN_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			lcdif: lcdif@32e00000 {
+				compatible = "fsl,imx8mn-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x32e00000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_LCDIF>;
+				status = "disabled";
+
+				port {
+					lcdif_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif>;
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e10000 {
+				compatible = "fsl,imx8mn-mipi-dsim", "fsl,imx8mm-mipi-dsim";
+				reg = <0x32e10000 0x400>;
+				clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_DSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif: endpoint {
+							remote-endpoint = <&lcdif_to_dsim>;
+						};
+					};
+				};
+			};
+
+			isi: isi@32e20000 {
+				compatible = "fsl,imx8mn-isi";
+				reg = <0x32e20000 0x8000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+				clock-names = "axi", "apb";
+				fsl,blk-ctrl = <&disp_blk_ctrl>;
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						isi_in: endpoint {
+							remote-endpoint = <&mipi_csi_out>;
+						};
+					};
+				};
+			};
+
+			disp_blk_ctrl: blk-ctrl@32e28000 {
+				compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+				reg = <0x32e28000 0x100>;
+				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+						<&pgc_dispmix>, <&pgc_mipi>,
+						<&pgc_mipi>;
+				power-domain-names = "bus", "isi",
+						     "lcdif", "mipi-dsi",
+						     "mipi-csi";
+				clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+					 <&clk IMX8MN_CLK_DISP_APB>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+				clock-names = "disp_axi", "disp_apb",
+					      "disp_axi_root", "disp_apb_root",
+					      "lcdif-axi", "lcdif-apb", "lcdif-pix",
+					      "dsi-pclk", "dsi-ref",
+					      "csi-aclk", "csi-pclk";
+				assigned-clocks = <&clk IMX8MN_CLK_DSI_CORE>,
+						  <&clk IMX8MN_CLK_DSI_PHY_REF>,
+						  <&clk IMX8MN_CLK_DISP_PIXEL>,
+						  <&clk IMX8MN_CLK_DISP_AXI>,
+						  <&clk IMX8MN_CLK_DISP_APB>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
+							 <&clk IMX8MN_CLK_24M>,
+							 <&clk IMX8MN_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MN_SYS_PLL2_1000M>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <266000000>,
+						       <24000000>,
+						       <594000000>,
+						       <500000000>,
+						       <200000000>;
+				#power-domain-cells = <1>;
+			};
+
+			mipi_csi: mipi-csi@32e30000 {
+				compatible = "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e30000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>;
+				assigned-clock-rates = <333000000>;
+				clock-frequency = <333000000>;
+				clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_CAMERA_PIXEL>,
+					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_MIPI_CSI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_out: endpoint {
+							remote-endpoint = <&isi_in>;
+						};
+					};
+				};
+			};
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
+				phys = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_hsiomix>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc",
+					     "fsl,imx6q-usbmisc";
+				#index-cells = <1>;
+				reg = <0x32e40200 0x200>;
+			};
+		};
+
+		dma_apbh: dma-controller@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: nand-controller@33002000 {
+			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MN_CLK_NAND_ROOT>,
+				 <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+				<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+				<&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+				<&clk IMX8MN_CLK_GPU_SHADER>;
+			clock-names = "reg", "bus", "core", "shader";
+			assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+					  <&clk IMX8MN_CLK_GPU_SHADER>,
+					  <&clk IMX8MN_CLK_GPU_AXI>,
+					  <&clk IMX8MN_CLK_GPU_AHB>,
+					  <&clk IMX8MN_GPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+						  <&clk IMX8MN_GPU_PLL_OUT>,
+						  <&clk IMX8MN_SYS_PLL1_800M>,
+						  <&clk IMX8MN_SYS_PLL1_800M>;
+			assigned-clock-rates = <400000000>,
+					       <400000000>,
+					       <800000000>,
+					       <400000000>,
+					       <1200000000>;
+			power-domains = <&pgc_gpumix>;
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MN_CLK_DRAM_CORE>,
+				 <&clk IMX8MN_DRAM_PLL>,
+				 <&clk IMX8MN_CLK_DRAM_ALT>,
+				 <&clk IMX8MN_CLK_DRAM_APB>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	usbphynop1: usbphynop1 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
new file mode 100644
index 000000000..acd265d8b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Logic PD, Inc dba Beacon EmbeddedWorks
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp.dtsi"
+#include "imx8mp-beacon-som.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks i.MX8MPlus Development kit";
+	compatible = "beacon,imx8mp-beacon-kit", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-0 {
+			label = "btn0";
+			linux,code = <BTN_0>;
+			gpios = <&pca6416_1 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "btn1";
+			linux,code = <BTN_1>;
+			gpios = <&pca6416_1 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "btn2";
+			linux,code = <BTN_2>;
+			gpios = <&pca6416_1 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "btn3";
+			linux,code = <BTN_3>;
+			gpios = <&pca6416_1 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led3>;
+
+		led-0 {
+			label = "gen_led0";
+			gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "gen_led1";
+			gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "gen_led2";
+			gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "heartbeat";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie0_refclk: clock-pcie {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_audio: regulator-wm8962 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <20000>;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-wm8962 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8962";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Microphone", "Headset Mic",
+					    "Speaker", "Speaker";
+		simple-audio-card,routing = "Headphones", "HPOUTL",
+					    "Headphones", "HPOUTR",
+					    "Speaker", "SPKOUTL",
+					    "Speaker", "SPKOUTR",
+					    "Headset Mic", "MICBIAS",
+					    "IN3R", "Headset Mic";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8962>;
+			clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm: tpm@0 {
+		compatible = "infineon,slb9670";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1640",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <150000>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio2 {
+	usb-mux-hog {
+		gpio-hog;
+		gpios = <20 0>;
+		output-low;
+		line-name = "USB-C Mux En";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pca6416_3: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	/* Connected to USB Hub */
+	usb-typec@52 {
+		compatible = "nxp,ptn5110";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+		};
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wm8962>;
+		clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+		assigned-clocks = <&clk IMX8MP_CLK_IPP_DO_CLKO1>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <22576000>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+		#sound-dai-cells = <0>;
+	};
+
+	pca6416: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6414>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pca6416_1: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		usb-hub-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "USB Hub Enable";
+		};
+	};
+
+	usb-typec@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hd3ss3220>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
+			  <&clk IMX8MP_AUDIO_PLL2> ;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+	assigned-clock-rates = <12288000>, <361267200>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x40000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC	0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO	0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x140
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x10
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX	0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX	0x154
+		>;
+	};
+
+	pinctrl_hd3ss3220: hd3ss3220grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x140
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL	0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL	0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA	0x400001c2
+		>;
+	};
+
+	pinctrl_led3: led3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x41
+		>;
+	};
+
+	pinctrl_pcal6414: pcal6414-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x10 /* PCIe_nDIS */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x10	/* PCIe_nRST */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19 /* Reset */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1d6 /* IRQ */
+		>;
+	};
+
+	pinctrl_typec: typec1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0xc4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_wm8962: wm8962grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1	0x59
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
new file mode 100644
index 000000000..e5da90804
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-som.dtsi
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 LogicPD, Inc. dba Beacon EmbeddedWorks
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	reg_wl_bt: regulator-wifi-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl_bt>;
+		regulator-name = "wl-bt-pow-dwn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <70000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@3 {
+			compatible = "ethernet-phy-id0022.1640",
+				     "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <384000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+	};
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl_bt>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mwifiex: wifi@1 {
+		compatible = "marvell,sd8997";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x10
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x10
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x1c0
+		>;
+	};
+
+	pinctrl_reg_wl_bt: reg-wl-btgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
new file mode 100644
index 000000000..13674dc64
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -0,0 +1,977 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Data Modul i.MX8M Plus eDM SBC";
+	compatible = "dmo,imx8mp-data-modul-edm-sbc", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* There are 1/2/4 GiB options, adjusted by bootloader. */
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_backlight>;
+		brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 5000000 0>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	panel: panel {
+		/* Compatible string is filled in by panel board DT Overlay. */
+		backlight = <&backlight>;
+		power-supply = <&reg_panel_vcc>;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_panel_vcc: regulator-panel-vcc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "PANEL_VCC";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Disabled by default, unless display board plugged in. */
+		status = "disabled";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		/* GPIO flags are ignored, enable-active-high applies. */
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; /* SD2_RESET */
+		enable-active-high;
+		off-on-delay-us = <12000>;
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+
+	watchdog { /* TPS3813 */
+		compatible = "linux,wdt-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_watchdog_gpio>;
+		always-running;
+		gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		hw_algo = "level";
+		/* Reset triggers in 2..3 seconds */
+		hw_margin_ms = <1500>;
+		/* Disabled by default */
+		status = "disabled";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128JVEI */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;	/* Up to 133 MHz */
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+	};
+};
+
+&ecspi2 {	/* Feature connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless feature board plugged in. */
+	status = "disabled";
+};
+
+&ecspi3 {	/* Display connector SPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-handle = <&phy_eqos>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_eqos>;
+
+			vddio_eqos: vddio-regulator {
+				regulator-name = "VDDIO_EQOS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_eqos: vddh-regulator {
+				regulator-name = "VDDH_EQOS";
+			};
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&phy_fec>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8031 PHY */
+		phy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			/*
+			 * Dedicated ENET_WOL# signal is unused, the PHY
+			 * can wake the SoC up via INT signal as well.
+			 */
+			interrupts-extended = <&gpio2 2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			qca,keep-pll-enabled;
+			vddio-supply = <&vddio_fec>;
+
+			vddio_fec: vddio-regulator {
+				regulator-name = "VDDIO_FEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vddh_fec: vddh-regulator {
+				regulator-name = "VDDH_FEC";
+			};
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "USBHUB_RESET#", "WDOG_B#", "PMIC_INT#",
+		"", "M2_PCIE_RST#", "M2_PCIE_WAKE#", "GPIO5_IO03",
+		"GPIO5_IO04", "PDM_SEL", "ENET_WOL#", "ENET_INT#",
+		"", "", "", "ENET_RST#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "ENET2_INT#", "", "", "", "", "",
+		"WDOG_KICK#", "ENET2_RST#", "CAN_INT#", "RTC_IRQ#",
+		"", "", "", "",
+		"", "", "", "SD2_RESET#", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+		"", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+		"CSI2_PD_1V8", "CSI2_RESET_1V8#", "", "",
+		"", "", "EEPROM_WP_1V8#", "", "", "", "", "",
+		"MEMCFG0", "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#",
+		"", "M2_W_DISABLE1_1V8#",
+		"M2_W_DISABLE2_1V8#", "", "I2C5_SCL_3V3", "I2C5_SDA_3V3",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"DSI_RESET_1V8#", "MEMCFG2", "", "MEMCFG1", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "GRAPHICS_PRSNT_1V8#", "DSI_IRQ_1V8#",
+		"", "DIS_USB_DN1", "DIS_USB_DN2", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "WDOG_EN", "", "",
+		"", "SPI1_CS#", "", "",
+		"", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+		"I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+		"", "", "", "",
+		"", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	usb-hub@2c {
+		compatible = "microchip,usb2514bi";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_hub>;
+		individual-port-switching;
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		self-powered;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio2 11 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pcieclk: clk@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_panel_pwm>;
+	/* Disabled by default, unless display board plugged in. */
+	status = "disabled";
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&uart1 {	/* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "disabled";	/* Optional */
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {	/* A53 Debug */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb_dwc3_0 {	/* Lower plug direct */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {	/* Upper plug via HUB */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
+
+/* IOMUXC node should be at the end of DT to improve readability. */
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+		    <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+		    <&pinctrl_panel_expansion>;
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x44
+			MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x44
+			MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x44
+			MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x40
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			/* ENET_RST# */
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x6
+			/* ENET_INT# */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			/* ENET2_RST# */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x6
+			/* ENET2_INT# */
+			MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x40000090
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_hog_feature: hog-feature-grp {
+		fsl,pins = <
+			/* GPIO5_IO03 */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40000006
+			/* GPIO5_IO04 */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40000006
+
+			/* CAN_INT# */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x40000090
+		>;
+	};
+
+	pinctrl_hog_panel: hog-panel-grp {
+		fsl,pins = <
+			/* GRAPHICS_GPIO0_1V8 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x26
+		>;
+	};
+
+	pinctrl_hog_misc: hog-misc-grp {
+		fsl,pins = <
+			/* ENET_WOL# -- shared by both PHYs */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x40000090
+
+			/* PG_V_IN_VAR# */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01		0x40000000
+			/* CSI2_PD_1V8 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08		0x0
+			/* CSI2_RESET_1V8# */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09		0x0
+
+			/* DIS_USB_DN1 */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			/* DIS_USB_DN2 */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+
+			/* EEPROM_WP_1V8# */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x100
+			/* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x0
+			/* GRAPHICS_PRSNT_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x40000000
+
+			/* CLK_CCM_CLKO1_3V3 */
+			MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1		0x10
+		>;
+	};
+
+	pinctrl_hog_sbc: hog-sbc-grp {
+		fsl,pins = <
+			/* MEMCFG[0..2] straps */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x40000140
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x40000140
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000140
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x40000084
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x84
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x84
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x40000084
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x84
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x84
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
+		>;
+	};
+
+	pinctrl_panel_backlight: panel-backlight-grp {
+		fsl,pins = <
+			/* BL_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00		0x104
+		>;
+	};
+
+	pinctrl_panel_expansion: panel-expansion-grp {
+		fsl,pins = <
+			/* DSI_RESET_1V8# */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x2
+			/* DSI_IRQ_1V8# */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000090
+		>;
+	};
+
+	pinctrl_panel_pwm: panel-pwm-grp {
+		fsl,pins = <
+			/* BL_PWM_3V3 */
+			MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT			0x12
+		>;
+	};
+
+	pinctrl_panel_vcc_reg: panel-vcc-grp {
+		fsl,pins = <
+			/* TFT_ENABLE_1V8 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06		0x104
+		>;
+	};
+
+	pinctrl_pcie0: pcie-grp {
+		fsl,pins = <
+			/* M2_PCIE_RST# */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
+			/* M2_W_DISABLE1_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x2
+			/* M2_W_DISABLE2_1V8# */
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x2
+			/* CLK_M2_32K768 */
+			MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1		0x14
+			/* M2_PCIE_WAKE# */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40000140
+			/* M2_PCIE_CLKREQ# */
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B		0x61
+		>;
+	};
+
+	pinctrl_pdm: pdm-grp {
+		fsl,pins = <
+			/* PDM_SEL */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x0
+			MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK		0x0
+			MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00	0x0
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			/* PMIC_nINT */
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			/* RTC_IRQ# */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x40000090
+		>;
+	};
+
+	pinctrl_sai1: sai1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK	0xd6
+			MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS		0x49
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usb_hub: usb-hub-grp {
+		fsl,pins = <
+			/* USBHUB_RESET# */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x4
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x6
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x80
+		>;
+	};
+
+	pinctrl_watchdog_gpio: watchdog-gpio-grp {
+		fsl,pins = <
+			/* WDOG_B# */
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x26
+			/* WDOG_EN -- ungate WDT RESET# signal propagation */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x6
+			/* WDOG_KICK# / WDI */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x26
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
new file mode 100644
index 000000000..267ceffc0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright 2022 Ideas on Board Oy
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Polyhex Debix Model A i.MX8MPlus board";
+	compatible = "polyhex,imx8mp-debix-model-a", "polyhex,imx8mp-debix", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_hub>;
+		regulator-name = "USB_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-connection-type = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 { /* RTL8211E */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20>;
+			reset-deassert-us = <200000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&reg_usb_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+/* SD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
+			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT			0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16				0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL					0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA					0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL					0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL				0x400001c3
+			MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA					0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03				0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19				0x41
+		>;
+	};
+
+	pinctrl_reg_usb_hub: regusbhubgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26				0x19
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11				0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX				0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX				0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX				0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX				0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX				0x49
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR				0x10
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK				0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD				0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0				0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1				0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2				0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3				0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12				0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK				0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD				0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0				0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1				0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2				0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3				0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4				0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5				0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6				0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7				0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE				0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B				0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
new file mode 100644
index 000000000..0b0c95432
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-debix-som-a.dtsi"
+
+/ {
+	model = "Polyhex i.MX8MPlus Debix SOM A on BMB-08";
+	compatible = "polyhex,imx8mp-debix-som-a-bmb-08", "polyhex,imx8mp-debix-som-a",
+		     "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "BB_VDD3V3";
+		/* Required timings for ethernet phy's */
+		startup-delay-us = <50000>;
+		off-on-delay-us = <110000>;
+		gpio = <&expander0 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_baseboard_vdd5v0: regulator-baseboard-vdd5v0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "BB_VDD5V";
+		gpio = <&expander0 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator-som-vdd1v8 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "SOM_VDD1V8_SW";
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-som-vdd3v3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "SOM_VDD3V3_SW";
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-vbus-usb20 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "USB20_5V";
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_baseboard_vdd5v0>;
+	};
+
+	regulator-vbus-usb30 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "USB30_5V";
+		gpio = <&expander1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_baseboard_vdd5v0>;
+	};
+
+	reg_vdd5v0: regulator-vdd5v0 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "VDD_5V";
+		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	nvmem-cells = <&ethmac1>;
+	nvmem-cell-names = "mac-address";
+	phy-supply = <&reg_baseboard_vdd3v3>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <150000>;
+			eee-broken-1000t;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	nvmem-cells = <&ethmac2>;
+	nvmem-cell-names = "mac-address";
+	phy-supply = <&reg_baseboard_vdd3v3>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <20000>;
+			reset-deassert-us = <150000>;
+			eee-broken-1000t;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_vdd5v0>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_vdd5v0>;
+	status = "okay";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c4 {
+	expander0: gpio@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <0x02>;
+	};
+
+	expander1: gpio@23 {
+		compatible = "nxp,pca9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <0x02>;
+
+		/*
+		 * Since USB1 is bound to peripheral mode we need to ensure
+		 * that VBUS is turned off.
+		 */
+		usb30-otg-hog {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "USB30_OTG_EN";
+		};
+	};
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* MACs stored in ASCII */
+		ethmac1: mac-address@0 {
+			reg = <0x0 0xc>;
+		};
+
+		ethmac2: mac-address@c {
+			reg = <0xc 0xc>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Debug */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vdd5v0>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vdd5v0>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* µSD Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN			0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18				0x19
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN    0x1f
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX			0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX			0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX			0x154
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x140
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x14f
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x14f
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
new file mode 100644
index 000000000..bc312aa1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ * Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Polyhex i.MX8MPlus Debix SOM A";
+	compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	adc@48 {
+		 compatible = "ti,ads1115";
+		 reg = <0x48>;
+		 #address-cells = <1>;
+		 #size-cells = <0>;
+
+		 channel@4 {
+			 reg = <4>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@5 {
+			 reg = <5>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@6 {
+			 reg = <6>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+
+		 channel@7 {
+			 reg = <7>;
+			 ti,gain = <1>;
+			 ti,datarate = <7>;
+		 };
+	 };
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
new file mode 100644
index 000000000..e9fb5f7f3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
+	compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			pinctrl-0 = <&pinctrl_dhcom_h>;
+			pinctrl-names = "default";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_3p3vdd: regulator-3p3vdd {	/* 3.3VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3VDD";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c5 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&reg_3p3vdd>;
+		VDDIO-supply = <&reg_vdd_3p3v_awo>;
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii";
+
+	mdio {
+		ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			max-speed = <100>;
+			reg = <7>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clock-names = "ref";
+	clocks = <&clk IMX8MP_SYS_PLL2_100M>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_UNUSED>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <1>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;	/* GPIO J */
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,over-current-active-low;
+};
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,D are connected to buttons.
+	 * GPIO_E,F,H,I are connected to LEDs.
+	 * GPIO_M is connected to CLKOUT1.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_g &pinctrl_dhcom_j
+		     &pinctrl_dhcom_k &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
new file mode 100644
index 000000000..31d85d587
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX8MP variant:
+ * DHCM-iMX8ML8-C160-R409-F1638-SPI16-GE-CAN2-SD-RTC-WBTA-ADC-T-RGB-CSI2-HS-I-01D2
+ * DHCOM PCB number: 660-100 or newer
+ * PDK3 PCB number: 669-100 or newer
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-dhcom-som.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3)";
+	compatible = "dh,imx8mp-dhcom-pdk3", "dh,imx8mp-dhcom-som",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	clk_xtal25: clock-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				usb_c_0_hs_ep: endpoint {
+					remote-endpoint = <&dwc3_0_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				usb_c_0_ss_ep: endpoint {
+					remote-endpoint = <&ptn5150_in_ep>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; /* GPIO E */
+			label = "TA4-GPIO-E";
+			linux,code = <KEY_E>;
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; /* GPIO D */
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; /* GPIO G */
+			pinctrl-0 = <&pinctrl_dhcom_g>;
+			pinctrl-names = "default";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	reg_3p3vdd: regulator-3p3vdd {	/* 3.3VDD */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3VDD";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9540";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cmuxed0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				#sound-dai-cells = <0>;
+				clocks = <&clk_ext_audio_codec>;
+				VDDA-supply = <&reg_3p3vdd>;
+				VDDIO-supply = <&reg_vdd_3p3v_awo>;
+			};
+
+			typec@3d {
+				compatible = "nxp,ptn5150";
+				reg = <0x3d>;
+				interrupt-parent = <&gpio4>;
+				interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ptn5150>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						ptn5150_in_ep: endpoint {
+							remote-endpoint = <&usb_c_0_ss_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						ptn5150_out_ep: endpoint {
+							remote-endpoint = <&dwc3_0_ss_ep>;
+						};
+					};
+				};
+			};
+
+			power-sensor@40 {
+			    compatible = "ti,ina238";
+			    reg = <0x40>;
+			    shunt-resistor = <20000>;	/* 0.02 R */
+			    ti,shunt-gain = <1>;	/* Drop cca. 40mV */
+			};
+
+			eeprom_board: eeprom@54 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x54>;
+			};
+
+			pcieclk: clock@6b {
+				compatible = "skyworks,si52144";
+				reg = <0x6b>;
+				clocks = <&clk_xtal25>;
+				#clock-cells = <1>;
+			};
+		};
+
+		i2cmuxed1: i2c@1 {	/* HDMI DDC I2C */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&ethphy0g {
+	reg = <7>;
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-0 = <&pinctrl_fec_rgmii>;
+	phy-handle = <&ethphypdk>;
+	phy-mode = "rgmii-id";
+
+	mdio {
+		ethphypdk: ethernet-phy@7 { /* Micrel KSZ9131RNXI */
+			compatible = "ethernet-phy-id0022.1642",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			/* RESET_N signal rise time ~100ms */
+			reset-deassert-us = <120000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcieclk 1>;
+	clock-names = "ref";
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&pcie {
+	fsl,max-link-speed = <3>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	usb-role-switch;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_hs_ep: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usb_c_0_hs_ep>;
+		};
+
+		dwc3_0_ss_ep: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ptn5150_out_ep>;
+		};
+	};
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+};
+
+&usb_dwc3_1 {
+	/* This port has USB5734 Hub connected to it, PWR/OC pins are unused */
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&iomuxc {
+	/*
+	 * GPIO_A,B,C,E are connected to buttons.
+	 * GPIO_D,F,G,I are connected to LEDs.
+	 * GPIO_H is connected to USB Hub RESET_N.
+	 * GPIO_M is connected to CLKOUT2.
+	 */
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_h &pinctrl_dhcom_j &pinctrl_dhcom_k
+		     &pinctrl_dhcom_l
+		     &pinctrl_dhcom_int>;
+
+	pinctrl_ptn5150: ptn5150grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40000000
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
new file mode 100644
index 000000000..cb1953d14
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -0,0 +1,1144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "DH electronics i.MX8M Plus DHCOM SoM";
+	compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		rtc0 = &rv3032;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
+		reg = <0x0 0x40000000 0 0x08000000>;
+	};
+
+	reg_eth_vio: regulator-eth-vio {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&pinctrl_enet_vio>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "eth_vio";
+		vin-supply = <&buck4>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_3V3_SD";
+		startup-delay-us = <100>;
+		vin-supply = <&buck4>;
+	};
+
+	reg_vdd_3p3v_awo: regulator-vdd-3p3v-awo {	/* VDD_3V3_AWO */
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "VDD_3P3V_AWO";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&eqos {	/* First ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
+	phy-handle = <&ethphy0g>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Up to one of these two PHYs may be populated. */
+		ethphy0f: ethernet-phy@0 { /* SMSC LAN8740Ai */
+			compatible = "ethernet-phy-id0007.c110",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio3>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			/* Non-default PHY population option. */
+			status = "disabled";
+		};
+
+		ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */
+			compatible = "ethernet-phy-id0022.1642",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio3>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <5>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+			/* Default PHY population option. */
+			status = "okay";
+		};
+	};
+};
+
+&fec {	/* Second ethernet */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec_rmii>;
+	phy-handle = <&ethphy1f>;
+	phy-mode = "rmii";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Up to one PHY may be populated. */
+		ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
+			compatible = "ethernet-phy-id0007.c110",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy1>;
+			pinctrl-names = "default";
+			reg = <1>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			/* Non-default PHY population option. */
+			status = "disabled";
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {	/* W25Q128JWPIM */
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L",
+		"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DHCOM-K", "", "", "", "",
+		"", "", "", "", "DHCOM-INT", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "SOM-HW0", "",
+		"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
+		"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "SOM-HW1", "", "", "", "",
+		"", "", "", "DHCOM-D", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "DHCOM-C", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DHCOM-E", "DHCOM-F",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tc_bridge: bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		reg = <0xf>;
+		clock-names = "ref";
+		clocks = <&clk IMX8MP_CLK_CLKOUT2>;
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT2_SEL>,
+				  <&clk IMX8MP_CLK_CLKOUT2>,
+				  <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
+		assigned-clock-rates = <13000000>, <13000000>, <156000000>;
+		reset-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tc_bridge_in: endpoint {
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8CVNKZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <3125>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4: BUCK4 {	/* VDD_3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* VDD_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* NVCC_DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* PMIC_LDO4 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	adc@48 {
+		compatible = "ti,tla2024";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {	/* Voltage over AIN0 and AIN1. */
+			reg = <0>;
+		};
+
+		channel@1 {	/* Voltage over AIN0 and AIN3. */
+			reg = <1>;
+		};
+
+		channel@2 {	/* Voltage over AIN1 and AIN3. */
+			reg = <2>;
+		};
+
+		channel@3 {	/* Voltage over AIN2 and AIN3. */
+			reg = <3>;
+		};
+
+		channel@4 {	/* Voltage over AIN0 and GND. */
+			reg = <4>;
+		};
+
+		channel@5 {	/* Voltage over AIN1 and GND. */
+			reg = <5>;
+		};
+
+		channel@6 {	/* Voltage over AIN2 and GND. */
+			reg = <6>;
+		};
+
+		channel@7 {	/* Voltage over AIN3 and GND. */
+			reg = <7>;
+		};
+	};
+
+	touchscreen@49 {
+		compatible = "ti,tsc2004";
+		reg = <0x49>;
+		interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		vio-supply = <&buck4>;
+	};
+
+	eeprom0: eeprom@50 {	/* EEPROM with EQoS MAC address */
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rv3032: rtc@51 {
+		compatible = "microcrystal,rv3032";
+		reg = <0x51>;
+		interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+	};
+
+	eeprom1: eeprom@53 {	/* EEPROM with FEC MAC address */
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x53>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <160000000>;
+	samsung,esc-clock-frequency = <10000000>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&tc_bridge_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&uart1 {
+	/* CA53 console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	/* Bluetooth */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+
+	/*
+	 * PLL1 at 80 MHz supplies UART2 root with 80 MHz clock,
+	 * which with 16x oversampling yields 5 Mbdps baud base,
+	 * which can be well divided by 5/4 to achieve 4 Mbdps,
+	 * which is exactly the maximum rate supported by muRata
+	 * 2AE bluetooth UART.
+	 */
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	assigned-clock-rates = <80000000>;
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart2_bt>;
+		compatible = "cypress,cyw4373a0-bt";
+		shutdown-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_vbus>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&buck4>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {	/* muRata 2AE */
+		reg = <1>;
+		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
+		/*
+		 * The "host-wake" interrupt output is by default not
+		 * connected to the SoC, but can be connected on to
+		 * SoC pin on the carrier board.
+		 */
+		reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SD slot */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog_base
+		     &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+		     /* GPIO_M is connected to CLKOUT1 */
+		     &pinctrl_dhcom_int>;
+	pinctrl-names = "default";
+
+	pinctrl_dhcom_a: dhcom-a-grp {
+		fsl,pins = <
+			/* ENET_QOS_EVENT0-OUT */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x2
+		>;
+	};
+
+	pinctrl_dhcom_b: dhcom-b-grp {
+		fsl,pins = <
+			/* ENET_QOS_EVENT0-IN */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x2
+		>;
+	};
+
+	pinctrl_dhcom_c: dhcom-c-grp {
+		fsl,pins = <
+			/* GPIO_C */
+			MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x2
+		>;
+	};
+
+	pinctrl_dhcom_d: dhcom-d-grp {
+		fsl,pins = <
+			/* GPIO_D */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x2
+		>;
+	};
+
+	pinctrl_dhcom_e: dhcom-e-grp {
+		fsl,pins = <
+			/* GPIO_E */
+			MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22		0x2
+		>;
+	};
+
+	pinctrl_dhcom_f: dhcom-f-grp {
+		fsl,pins = <
+			/* GPIO_F */
+			MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23		0x2
+		>;
+	};
+
+	pinctrl_dhcom_g: dhcom-g-grp {
+		fsl,pins = <
+			/* GPIO_G */
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x2
+		>;
+	};
+
+	pinctrl_dhcom_h: dhcom-h-grp {
+		fsl,pins = <
+			/* GPIO_H */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x2
+		>;
+	};
+
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <
+			/* CSI1_SYNC */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x2
+		>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <
+			/* CSIx_#RST */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x2
+		>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <
+			/* CSIx_PWDN */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x2
+		>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <
+			/* CSI2_SYNC */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x2
+		>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <
+			/* INT_HIGHEST_PRIO */
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x2
+		>;
+	};
+
+	pinctrl_hog_base: dhcom-hog-base-grp {
+		fsl,pins = <
+			/* GPIOs for memory coding */
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22		0x40000080
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x40000080
+			MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x40000080
+			/* GPIOs for hardware coding */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x40000080
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x40000080
+			MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25		0x40000080
+		>;
+	};
+
+	pinctrl_ecspi1: dhcom-ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK		0x44
+			MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI		0x44
+			MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO		0x44
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x40
+		>;
+	};
+
+	pinctrl_ecspi2: dhcom-ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x44
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x44
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x44
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40
+		>;
+	};
+
+	pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp {	/* RGMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+		>;
+	};
+
+	pinctrl_eqos_rmii: dhcom-eqos-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER		0x1f
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			/* Clock */
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000001f
+		>;
+	};
+
+	pinctrl_enet_vio: dhcom-enet-vio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
+		>;
+	};
+
+	pinctrl_ethphy0: dhcom-ethphy0-grp {
+		fsl,pins = <
+			/* ENET_QOS_#RST Reset */
+			MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x22
+			/* ENET_QOS_#INT Interrupt */
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x22
+		>;
+	};
+
+	pinctrl_ethphy1: dhcom-ethphy1-grp {
+		fsl,pins = <
+			/* ENET1_#RST Reset */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x11
+			/* ENET1_#INT Interrupt */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x11
+		>;
+	};
+
+	pinctrl_fec_rgmii: dhcom-fec-rgmii-grp {	/* RGMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x1f
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER		0x1f
+		>;
+	};
+
+	pinctrl_fec_rmii: dhcom-fec-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER		0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			/* Clock */
+			MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK		0x4000001f
+		>;
+	};
+
+	pinctrl_flexcan1: dhcom-flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_flexcan2: dhcom-flexcan2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__CAN2_TX			0x154
+			MX8MP_IOMUXC_UART3_TXD__CAN2_RX			0x154
+		>;
+	};
+
+	pinctrl_flexspi: dhcom-flexspi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82
+		>;
+	};
+
+	pinctrl_hdmi: dhcom-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_i2c3: dhcom-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x40000084
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x84
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x84
+		>;
+	};
+
+	pinctrl_i2c4: dhcom-i2c4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x40000084
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x40000084
+		>;
+	};
+
+	pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x84
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x84
+		>;
+	};
+
+	pinctrl_i2c5: dhcom-i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x40000084
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x40000084
+		>;
+	};
+
+	pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0x84
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0x84
+		>;
+	};
+
+	pinctrl_pmic: dhcom-pmic-grp {
+		fsl,pins = <
+			/* PMIC_nINT */
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40000090
+		>;
+	};
+
+	pinctrl_pwm1: dhcom-pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT		0x6
+		>;
+	};
+
+	pinctrl_rtc: dhcom-rtc-grp {
+		fsl,pins = <
+			/* RTC_#INT Interrupt */
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05		0x40000080
+		>;
+	};
+
+	pinctrl_tc9595: dhcom-tc9595-grp {
+		fsl,pins = <
+			/* RESET_DSIBRIDGE */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x40000146
+			/* DSI-CONV_INT Interrupt */
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x141
+		>;
+	};
+
+	pinctrl_sai3: dhcom-sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_touch: dhcom-touch-grp {
+		fsl,pins = <
+			/* #TOUCH_INT */
+			MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x40000080
+		>;
+	};
+
+	pinctrl_uart1: dhcom-uart1-grp {
+		fsl,pins = <
+			/* Console UART */
+			MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x49
+			MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX		0x49
+			MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x49
+			MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart2: dhcom-uart2-grp {
+		fsl,pins = <
+			/* Bluetooth UART */
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
+			MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x49
+			MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart2_bt: dhcom-uart2-bt-grp {
+		fsl,pins = <
+			/* BT_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x144
+		>;
+	};
+
+	pinctrl_uart3: dhcom-uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x49
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x49
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x49
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x49
+		>;
+	};
+
+	pinctrl_uart4: dhcom-uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usb0_vbus: dhcom-usb0-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID		0x0
+		>;
+	};
+
+	pinctrl_usb1_vbus: dhcom-usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x6
+			MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC		0x80
+		>;
+	};
+
+	pinctrl_usdhc1: dhcom-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			/* WL_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+			/* WL_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+			/* WL_REG_EN */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x144
+		>;
+	};
+
+	pinctrl_usdhc2: dhcom-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x20
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x40000080
+		>;
+	};
+
+	pinctrl_usdhc3: dhcom-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x141
+		>;
+	};
+
+	pinctrl_wdog: dhcom-wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
new file mode 100644
index 000000000..cc9d468b4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -0,0 +1,934 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus EVK board";
+	compatible = "fsl,imx8mp-evk", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		status {
+			label = "yellow:status";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audio_pwr_reg>;
+		regulator-name = "audio-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can1-stby";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can2-stby";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan2_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8960-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"External Speaker", "SPK_LP",
+			"External Speaker", "SPK_LN",
+			"External Speaker", "SPK_RP",
+			"External Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"Mic Jack", "MICB";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8960>;
+		};
+
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "disabled";/* can2 pin conflict with pdm */
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1045000>;
+				regulator-max-microvolt = <1155000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
+		reg-names = "main", "cec", "edid", "packet";
+		adi,dsi-lanes = <4>;
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		wlf,hp-cfg = <3 2 3>;
+		wlf,gpio-cfg = <1 3>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+	};
+
+	pca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca6416_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "EXT_PWREN1",
+			"EXT_PWREN2",
+			"CAN1/I2C5_SEL",
+			"PDM/CAN2_SEL",
+			"FAN_EN",
+			"PWR_MEAS_IO1",
+			"PWR_MEAS_IO2",
+			"EXP_P0_7",
+			"EXP_P1_0",
+			"EXP_P1_1",
+			"EXP_P1_2",
+			"EXP_P1_3",
+			"EXP_P1_4",
+			"EXP_P1_5",
+			"EXP_P1_6",
+			"EXP_P1_7";
+	};
+};
+
+/* I2C on expansion connector J22. */
+&i2c5 {
+	clock-frequency = <100000>; /* Lower clock speed for external bus. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	status = "disabled"; /* can1 pins conflict with i2c5 */
+
+	/* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions:
+	 *     LOW:  CAN1 (default, pull-down)
+	 *     HIGH: I2C5
+	 * You need to set it to high to enable I2C5 (for example, add gpio-hog
+	 * in pca6416 node).
+	 */
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&adv7533_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audio_pwr_reg: audiopwrreggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0xd6
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22				0x10
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x10
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX          0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX          0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX         0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX         0x154
+		>;
+	};
+
+	pinctrl_flexcan1_reg: flexcan1reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05  0x154   /* CAN1_STBY */
+		>;
+	};
+
+	pinctrl_flexcan2_reg: flexcan2reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27      0x154   /* CAN2_STBY */
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK           0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B        0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00      0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01      0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02      0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03      0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA         0x400001c2
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL         0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B	0x60 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07	0x40
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
+		>;
+	};
+
+	pinctrl_pca6416_int: pca6416_int_grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* Input pull-up. */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usb1_vbus: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR	0x10
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS		0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS		0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
new file mode 100644
index 000000000..a02b31c42
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-icore-mx8mp.dtsi"
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit";
+	compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp",
+		     "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb1_host_vbus";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+	};
+};
+
+/* Ethernet */
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDCARD */
+&usdhc2 {
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	pinctrl-names = "default" ;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL			0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL			0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07				0x10
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_reg_usb1: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x10
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
new file mode 100644
index 000000000..a6319824e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	compatible = "engicam,icore-mx8mp", "fsl,imx8mp";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2  {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+/* EMMC */
+&usdhc3 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	  0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
new file mode 100644
index 000000000..2f5cc013e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-14N0600E.dtsi
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>; /* bank0, 2GiB */
+	};
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+&soc_alert0 {
+	temperature = <95000>;
+};
+
+&soc_crit0 {
+	temperature = <105000>;
+};
+
+&tca6424 {
+	gbe0-int-hog {
+		gpio-hog;
+		input;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+	};
+
+	gbe1-int-hog {
+		gpio-hog;
+		input;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-rst-hog {
+		gpio-hog;
+		output-high;
+		gpios = <9 GPIO_ACTIVE_LOW>;
+	};
+
+	cam2-pwr-hog {
+		gpio-hog;
+		output-high;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+	};
+
+	tpm-int-hog {
+		gpio-hog;
+		input;
+		gpios = <13 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi-int-hog {
+		gpio-hog;
+		input;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
new file mode 100644
index 000000000..e4215c83e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-msc-sm2s-14N0600E.dtsi"
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MSC SM2-MB-EP1 Carrier Board with SM2S-IMX8PLUS-QC6-14N0600E SoM";
+	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
+		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
+		     "fsl,imx8mp";
+
+	reg_vcc_3v3_audio: 3v3-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_AUD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_1v8_audio: 1v8-audio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_AUD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,bitclock-master = <&codec_dai>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+
+		assigned-clocks = <&clk IMX8MP_CLK_CLKOUT1_SEL>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		assigned-clock-rates = <24000000>;
+		clocks = <&clk IMX8MP_CLK_CLKOUT1>;
+		#sound-dai-cells = <0>;
+
+		VDDA-supply  = <&reg_vcc_3v3_audio>;
+		VDDD-supply  = <&reg_vcc_1v8_audio>;
+		VDDIO-supply = <&reg_vcc_1v8_audio>;
+	};
+};
+
+/* I2S-0 = sai2 */
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+&usdhc2 {
+	no-1-8-v;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_smarc_gpio>;
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC   0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK    0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+		>;
+	};
+
+	pinctrl_smarc_gpio: smarcgpiosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x19>, /* GPIO0 */
+			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x19>, /* GPIO1 */
+			<MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x19>, /* GPIO2 */
+			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x19>, /* GPIO3 */
+			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x19>, /* GPIO4 */
+			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x19>, /* GPIO5 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x19>, /* GPIO6 */
+			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x19>, /* GPIO7 */
+			<MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x19>, /* GPIO8 */
+			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x19>, /* GPIO9 */
+			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x19>, /* GPIO10 */
+			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x19>, /* GPIO11 */
+			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x19>, /* GPIO12 */
+			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00	0x19>; /* GPIO13 */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
new file mode 100644
index 000000000..61c2a63ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
@@ -0,0 +1,820 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Avnet Embedded GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		rtc0 = &sys_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	reg_usb0_host_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb1_host_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_host_vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_flexcan1_xceiver: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan1-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_flexcan2_xceiver: regulator-flexcan2 {
+		compatible = "regulator-fixed";
+		regulator-name = "flexcan2-xceiver";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0_backlight: backlight-0 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd0_backlight>;
+		pwms = <&pwm1 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	lcd1_backlight: backlight-1 {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd1_backlight>;
+		pwms = <&pwm2 0 100000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+		status = "okay";
+
+		led-sw {
+			label = "sw-led";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	extcon_usb0: extcon-usb0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0_extcon>;
+		id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&vcc_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <0>, <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <0>, <&gpio2 9 GPIO_ACTIVE_LOW>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 16 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-gpios = <&tca6424 17 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	id_eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tca6424: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tca6424>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BOOT_SEL0#", "BOOT_SEL1#", "BOOT_SEL2#",
+			"gbe0_int", "gbe1_int", "pmic_int", "rtc_int", "lvds_int",
+			"PCIE_WAKE#", "cam2_rst", "cam2_pwr", "SLEEP#",
+			"wifi_pd", "tpm_int", "wifi_int", "PCIE_A_RST#",
+			"gbe0_rst", "gbe1_rst", "LID#", "BATLOW#", "CHARGING#",
+			"CHARGER_PRSNT#";
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dsi_lvds_bridge: bridge@2d {
+		compatible = "ti,sn65dsi83";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bridge>;
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	pmic: pmic@30 {
+		compatible = "ricoh,rn5t567";
+		reg = <0x30>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			DCDC1 {
+				regulator-name = "VCC_SOC";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC2 {
+				regulator-name = "VCC_DRAM";
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vcc_arm: DCDC3 {
+				regulator-name = "VCC_ARM";
+				regulator-always-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+			};
+
+			DCDC4 {
+				regulator-name = "VCC_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO1 {
+				regulator-name = "VCC_LDO1_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO2 {
+				regulator-name = "VCC_LDO2_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDO3 {
+				regulator-name = "VCC_ETH_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO4 {
+				regulator-name = "VCC_DDR4_2V5";
+				regulator-always-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			LDO5 {
+				regulator-name = "VCC_LDO5_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC1 {
+				regulator-name = "VCC_SNVS_1V8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			LDORTC2 {
+				regulator-name = "VCC_SNVS_3V3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sys_rtc: rtc@32 {
+		compatible = "ricoh,r2221tl";
+		reg = <0x32>;
+		interrupt-parent = <&tca6424>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tmp_sensor: temperature-sensor@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1_xceiver>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_flexcan2_xceiver>;
+	status = "disabled";
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	qspi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "disabled";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb0_host_vbus>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb1_host_vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	extcon = <&extcon_usb0>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x40000>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82>,
+			<MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000>,
+			<MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x40000>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3>,
+			<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3>,
+			<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91>,
+			<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x1f>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154>,
+			<MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2>,
+			<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
+			<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>,
+			<MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x19>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001c3>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL		0x400001c3>,
+			<MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA		0x400001c3>;
+	};
+
+	pinctrl_lcd0_backlight: lcd0-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x41>;
+	};
+
+	pinctrl_lcd1_backlight: lcd1-backlightgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x41>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x19>;
+	};
+
+	pinctrl_lvds_bridge: lvds-bridgegrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x41>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT		0x116>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT		0x116>;
+	};
+
+	pinctrl_tca6424: tca6424grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x41>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x1c4>,
+			<MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x1c4>,
+			<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>,
+			<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x1c4>,
+			<MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x49>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x49>,
+			<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x49>;
+	};
+
+	pinctrl_usb0_extcon: usb0-extcongrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x19>;
+	};
+
+	pinctrl_usb0_vbus: usb0-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x19>;
+	};
+
+	pinctrl_usb1_vbus: usb1-vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x19>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4>,
+			<MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x1c4>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmcgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
new file mode 100644
index 000000000..1e14c4cd3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Pollux i.MX8MP";
+	compatible = "phytec,imx8mp-phyboard-pollux-rdk",
+		     "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	leds@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-1 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* debug console */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20			0x10
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x1e2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x1e2
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+		>;
+	};
+
+	pinctrl_usdhc2_pins: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
new file mode 100644
index 000000000..d8df97060
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX8MP";
+	compatible = "phytec,imx8mp-phycore-som", "fsl,imx8mp";
+
+	aliases {
+		rtc0 = &rv3028;
+		rtc1 = &snvs_rtc;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+/* ethernet 1 */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			enet-phy-lane-no-swap;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,min-output-impedance;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	som_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1050000>;
+				regulator-min-microvolt = <805000>;
+				regulator-name = "VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "VDD_3V3 (BUCK4)";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDD_1V8 (BUCK5)";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "NVCC_SNVS_1V8 (LDO1)";
+			};
+
+			ldo3: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "VDDA_1V8 (LDO3)";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "NVCC_SD2 (LDO5)";
+			};
+		};
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rv3028: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+		trickle-resistor-ohms = <3000>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2
+			MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82
+			MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82
+			MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82
+			MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82
+			MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
new file mode 100644
index 000000000..0fef06647
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h
@@ -0,0 +1,799 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __DTS_IMX8MP_PINFUNC_H
+#define __DTS_IMX8MP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00                          0x014 0x274 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT           0x014 0x274 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0                       0x014 0x274 0x5D4 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1                        0x014 0x274 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01                          0x018 0x278 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT                            0x018 0x278 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0                  0x018 0x278 0x5DC 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2                        0x018 0x278 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02                          0x01C 0x27C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B                        0x01C 0x27C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__ISP_FLASH_TRIG_0                    0x01C 0x27C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_ANY                      0x01C 0x27C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO02__SJC_DE_B                            0x01C 0x27C 0x000 0x7 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03                          0x020 0x280 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__USDHC1_VSELECT                      0x020 0x280 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__ISP_PRELIGHT_TRIG_0                 0x020 0x280 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO03__SDMA1_EXT_EVENT00                   0x020 0x280 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04                          0x024 0x284 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT                      0x024 0x284 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__ISP_SHUTTER_OPEN_0                  0x024 0x284 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO04__SDMA1_EXT_EVENT01                   0x024 0x284 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05                          0x028 0x288 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__M7_NMI                              0x028 0x288 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__ISP_FL_TRIG_1                       0x028 0x288 0x5D8 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO05__CCM_PMIC_READY                      0x028 0x288 0x554 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06                          0x02C 0x28C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ENET_QOS_MDC                        0x02C 0x28C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__ISP_SHUTTER_TRIG_1                  0x02C 0x28C 0x5E0 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__USDHC1_CD_B                         0x02C 0x28C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO06__CCM_EXT_CLK3                        0x02C 0x28C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07                          0x030 0x290 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ENET_QOS_MDIO                       0x030 0x290 0x590 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__ISP_FLASH_TRIG_1                    0x030 0x290 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__USDHC1_WP                           0x030 0x290 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO07__CCM_EXT_CLK4                        0x030 0x290 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08                          0x034 0x294 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_IN             0x034 0x294 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__PWM1_OUT                            0x034 0x294 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ISP_PRELIGHT_TRIG_1                 0x034 0x294 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__ENET_QOS_1588_EVENT0_AUX_IN         0x034 0x294 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO08__USDHC2_RESET_B                      0x034 0x294 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09                          0x038 0x298 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ENET_QOS_1588_EVENT0_OUT            0x038 0x298 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__PWM2_OUT                            0x038 0x298 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__ISP_SHUTTER_OPEN_1                  0x038 0x298 0x000 0x3 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B                      0x038 0x298 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO09__SDMA2_EXT_EVENT00                   0x038 0x298 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10                          0x03C 0x29C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID                         0x03C 0x29C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO10__PWM3_OUT                            0x03C 0x29C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11                          0x040 0x2A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID                         0x040 0x2A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT                            0x040 0x2A0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__USDHC3_VSELECT                      0x040 0x2A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO11__CCM_PMIC_READY                      0x040 0x2A0 0x554 0x5 0x1
+#define MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12                          0x044 0x2A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR                        0x044 0x2A4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO12__SDMA2_EXT_EVENT01                   0x044 0x2A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13                          0x048 0x2A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC                         0x048 0x2A8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO13__PWM2_OUT                            0x048 0x2A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14                          0x04C 0x2AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR                        0x04C 0x2AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__USDHC3_CD_B                         0x04C 0x2AC 0x608 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__PWM3_OUT                            0x04C 0x2AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1                           0x04C 0x2AC 0x000 0x6 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15                          0x050 0x2B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC                         0x050 0x2B0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__USDHC3_WP                           0x050 0x2B0 0x634 0x4 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__PWM4_OUT                            0x050 0x2B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2                           0x050 0x2B0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC                          0x054 0x2B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_MDC__AUDIOMIX_SAI6_TX_DATA00               0x054 0x2B4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDC__GPIO1_IO16                            0x054 0x2B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDC__USDHC3_STROBE                         0x054 0x2B4 0x630 0x6 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO                        0x058 0x2B8 0x590 0x0 0x1
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_SAI6_TX_SYNC                0x058 0x2B8 0x528 0x2 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__AUDIOMIX_PDM_BIT_STREAM03            0x058 0x2B8 0x4CC 0x3 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__GPIO1_IO17                           0x058 0x2B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_MDIO__USDHC3_DATA5                         0x058 0x2B8 0x624 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3                    0x05C 0x2BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_SAI6_TX_BCLK                 0x05C 0x2BC 0x524 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD3__AUDIOMIX_PDM_BIT_STREAM02             0x05C 0x2BC 0x4C8 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD3__GPIO1_IO18                            0x05C 0x2BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD3__USDHC3_DATA6                          0x05C 0x2BC 0x628 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2                    0x060 0x2C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x060 0x2C0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_SAI6_RX_DATA00               0x060 0x2C0 0x51C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD2__AUDIOMIX_PDM_BIT_STREAM01             0x060 0x2C0 0x4C4 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD2__GPIO1_IO19                            0x060 0x2C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD2__USDHC3_DATA7                          0x060 0x2C0 0x62C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1                    0x064 0x2C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_SAI6_RX_SYNC                 0x064 0x2C4 0x520 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD1__AUDIOMIX_PDM_BIT_STREAM00             0x064 0x2C4 0x4C0 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD1__GPIO1_IO20                            0x064 0x2C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD1__USDHC3_CD_B                           0x064 0x2C4 0x608 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0                    0x068 0x2C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_SAI6_RX_BCLK                 0x068 0x2C8 0x518 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TD0__AUDIOMIX_PDM_CLK                      0x068 0x2C8 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TD0__GPIO1_IO21                            0x068 0x2C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TD0__USDHC3_WP                             0x068 0x2C8 0x634 0x6 0x1
+#define MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x06C 0x2CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SAI6_MCLK                 0x06C 0x2CC 0x514 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__AUDIOMIX_SPDIF1_OUT                0x06C 0x2CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__GPIO1_IO22                         0x06C 0x2CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TX_CTL__USDHC3_DATA0                       0x06C 0x2CC 0x610 0x6 0x0
+#define MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x070 0x2D0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_TXC__ENET_QOS_TX_ER                        0x070 0x2D0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_TXC__AUDIOMIX_SAI7_TX_DATA00               0x070 0x2D0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_ENET_TXC__GPIO1_IO23                            0x070 0x2D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_TXC__USDHC3_DATA1                          0x070 0x2D0 0x614 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x074 0x2D4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_SAI7_TX_SYNC              0x074 0x2D4 0x540 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__AUDIOMIX_PDM_BIT_STREAM03          0x074 0x2D4 0x4CC 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RX_CTL__GPIO1_IO24                         0x074 0x2D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RX_CTL__USDHC3_DATA2                       0x074 0x2D4 0x618 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x078 0x2D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER                        0x078 0x2D8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_SAI7_TX_BCLK                 0x078 0x2D8 0x53C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RXC__AUDIOMIX_PDM_BIT_STREAM02             0x078 0x2D8 0x4C8 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RXC__GPIO1_IO25                            0x078 0x2D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RXC__USDHC3_DATA3                          0x078 0x2D8 0x61C 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0                    0x07C 0x2DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_SAI7_RX_DATA00               0x07C 0x2DC 0x534 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD0__AUDIOMIX_PDM_BIT_STREAM01             0x07C 0x2DC 0x4C4 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD0__GPIO1_IO26                            0x07C 0x2DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD0__USDHC3_DATA4                          0x07C 0x2DC 0x620 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1                    0x080 0x2E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_SAI7_RX_SYNC                 0x080 0x2E0 0x538 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD1__AUDIOMIX_PDM_BIT_STREAM00             0x080 0x2E0 0x4C0 0x3 0x1
+#define MX8MP_IOMUXC_ENET_RD1__GPIO1_IO27                            0x080 0x2E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD1__USDHC3_RESET_B                        0x080 0x2E0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2                    0x084 0x2E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_SAI7_RX_BCLK                 0x084 0x2E4 0x530 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD2__AUDIOMIX_PDM_CLK                      0x084 0x2E4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD2__GPIO1_IO28                            0x084 0x2E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD2__USDHC3_CLK                            0x084 0x2E4 0x604 0x6 0x0
+#define MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3                    0x088 0x2E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SAI7_MCLK                    0x088 0x2E8 0x52C 0x2 0x0
+#define MX8MP_IOMUXC_ENET_RD3__AUDIOMIX_SPDIF1_IN                    0x088 0x2E8 0x544 0x3 0x0
+#define MX8MP_IOMUXC_ENET_RD3__GPIO1_IO29                            0x088 0x2E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ENET_RD3__USDHC3_CMD                            0x088 0x2E8 0x60C 0x6 0x0
+#define MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK                             0x08C 0x2EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CLK__ENET1_MDC                              0x08C 0x2EC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CLK__I2C5_SCL                               0x08C 0x2EC 0x5C4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX                           0x08C 0x2EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__UART1_DTE_RX                           0x08C 0x2EC 0x5E8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CLK__GPIO2_IO00                             0x08C 0x2EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD                             0x090 0x2F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_CMD__ENET1_MDIO                             0x090 0x2F0 0x57C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_CMD__I2C5_SDA                               0x090 0x2F0 0x5C8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX                           0x090 0x2F0 0x5E8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_CMD__UART1_DTE_TX                           0x090 0x2F0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_CMD__GPIO2_IO01                             0x090 0x2F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0                         0x094 0x2F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__ENET1_RGMII_TD1                      0x094 0x2F4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL                             0x094 0x2F4 0x5CC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DCE_RTS                        0x094 0x2F4 0x5E4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__UART1_DTE_CTS                        0x094 0x2F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02                           0x094 0x2F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1                         0x098 0x2F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__ENET1_RGMII_TD0                      0x098 0x2F8 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA                             0x098 0x2F8 0x5D0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DCE_CTS                        0x098 0x2F8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA1__UART1_DTE_RTS                        0x098 0x2F8 0x5E4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03                           0x098 0x2F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2                         0x09C 0x2FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__ENET1_RGMII_RD0                      0x09C 0x2FC 0x580 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__I2C4_SCL                             0x09C 0x2FC 0x5BC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX                         0x09C 0x2FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__UART2_DTE_RX                         0x09C 0x2FC 0x5F0 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA2__GPIO2_IO04                           0x09C 0x2FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3                         0x0A0 0x300 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__ENET1_RGMII_RD1                      0x0A0 0x300 0x584 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__I2C4_SDA                             0x0A0 0x300 0x5C0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX                         0x0A0 0x300 0x5F0 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA3__UART2_DTE_TX                         0x0A0 0x300 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA3__GPIO2_IO05                           0x0A0 0x300 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4                         0x0A4 0x304 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__ENET1_RGMII_TX_CTL                   0x0A4 0x304 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__I2C1_SCL                             0x0A4 0x304 0x5A4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS                        0x0A4 0x304 0x5EC 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__UART2_DTE_CTS                        0x0A4 0x304 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06                           0x0A4 0x304 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5                         0x0A8 0x308 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__ENET1_TX_ER                          0x0A8 0x308 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__I2C1_SDA                             0x0A8 0x308 0x5A8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS                        0x0A8 0x308 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA5__UART2_DTE_RTS                        0x0A8 0x308 0x5EC 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07                           0x0A8 0x308 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6                         0x0AC 0x30C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__ENET1_RGMII_RX_CTL                   0x0AC 0x30C 0x588 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__I2C2_SCL                             0x0AC 0x30C 0x5AC 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX                         0x0AC 0x30C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__UART3_DTE_RX                         0x0AC 0x30C 0x5F8 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08                           0x0AC 0x30C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7                         0x0B0 0x310 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__ENET1_RX_ER                          0x0B0 0x310 0x58C 0x1 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__I2C2_SDA                             0x0B0 0x310 0x5B0 0x3 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX                         0x0B0 0x310 0x5F8 0x4 0x1
+#define MX8MP_IOMUXC_SD1_DATA7__UART3_DTE_TX                         0x0B0 0x310 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09                           0x0B0 0x310 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B                     0x0B4 0x314 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__ENET1_TX_CLK                       0x0B4 0x314 0x578 0x1 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__I2C3_SCL                           0x0B4 0x314 0x5B4 0x3 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS                      0x0B4 0x314 0x5F4 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__UART3_DTE_CTS                      0x0B4 0x314 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10                         0x0B4 0x314 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE                       0x0B8 0x318 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__I2C3_SDA                            0x0B8 0x318 0x5B8 0x3 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS                       0x0B8 0x318 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD1_STROBE__UART3_DTE_RTS                       0x0B8 0x318 0x5F4 0x4 0x1
+#define MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11                          0x0B8 0x318 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B                           0x0BC 0x31C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12                            0x0BC 0x31C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK                             0x0C0 0x320 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CLK__ECSPI2_SCLK                            0x0C0 0x320 0x568 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DCE_RX                           0x0C0 0x320 0x600 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__UART4_DTE_TX                           0x0C0 0x320 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13                             0x0C0 0x320 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD                             0x0C4 0x324 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_CMD__ECSPI2_MOSI                            0x0C4 0x324 0x570 0x2 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DCE_TX                           0x0C4 0x324 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_CMD__UART4_DTE_RX                           0x0C4 0x324 0x600 0x3 0x1
+#define MX8MP_IOMUXC_SD2_CMD__AUDIOMIX_PDM_CLK                       0x0C4 0x324 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14                             0x0C4 0x324 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0                         0x0C8 0x328 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__I2C4_SDA                             0x0C8 0x328 0x5C0 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DCE_RX                         0x0C8 0x328 0x5F0 0x3 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__UART2_DTE_TX                         0x0C8 0x328 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA0__AUDIOMIX_PDM_BIT_STREAM00            0x0C8 0x328 0x4C0 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15                           0x0C8 0x328 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1                         0x0CC 0x32C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__I2C4_SCL                             0x0CC 0x32C 0x5BC 0x2 0x1
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DCE_TX                         0x0CC 0x32C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA1__UART2_DTE_RX                         0x0CC 0x32C 0x5F0 0x3 0x3
+#define MX8MP_IOMUXC_SD2_DATA1__AUDIOMIX_PDM_BIT_STREAM01            0x0CC 0x32C 0x4C4 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16                           0x0CC 0x32C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2                         0x0D0 0x330 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__ECSPI2_SS0                           0x0D0 0x330 0x574 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_SPDIF1_OUT                  0x0D0 0x330 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SD2_DATA2__AUDIOMIX_PDM_BIT_STREAM02            0x0D0 0x330 0x4C8 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17                           0x0D0 0x330 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3                         0x0D4 0x334 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__ECSPI2_MISO                          0x0D4 0x334 0x56C 0x2 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_SPDIF1_IN                   0x0D4 0x334 0x544 0x3 0x1
+#define MX8MP_IOMUXC_SD2_DATA3__AUDIOMIX_PDM_BIT_STREAM03            0x0D4 0x334 0x4CC 0x4 0x2
+#define MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18                           0x0D4 0x334 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_DATA3__SRC_EARLY_RESET                      0x0D4 0x334 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B                     0x0D8 0x338 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19                         0x0D8 0x338 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_RESET_B__SRC_SYSTEM_RESET                   0x0D8 0x338 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SD2_WP__USDHC2_WP                               0x0DC 0x33C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SD2_WP__GPIO2_IO20                              0x0DC 0x33C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SD2_WP__CORESIGHT_EVENTI                        0x0DC 0x33C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_ALE__NAND_ALE                              0x0E0 0x340 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK                        0x0E0 0x340 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_ALE__AUDIOMIX_SAI3_TX_BCLK                 0x0E0 0x340 0x4E8 0x2 0x0
+#define MX8MP_IOMUXC_NAND_ALE__ISP_FL_TRIG_0                         0x0E0 0x340 0x5D4 0x3 0x1
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DCE_RX                          0x0E0 0x340 0x5F8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_ALE__UART3_DTE_TX                          0x0E0 0x340 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00                            0x0E0 0x340 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_ALE__CORESIGHT_TRACE_CLK                   0x0E0 0x340 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__NAND_CE0_B                          0x0E4 0x344 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B                     0x0E4 0x344 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__AUDIOMIX_SAI3_TX_DATA00             0x0E4 0x344 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__ISP_SHUTTER_TRIG_0                  0x0E4 0x344 0x5DC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DCE_TX                        0x0E4 0x344 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__UART3_DTE_RX                        0x0E4 0x344 0x5F8 0x4 0x3
+#define MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01                          0x0E4 0x344 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE0_B__CORESIGHT_TRACE_CTL                 0x0E4 0x344 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__NAND_CE1_B                          0x0E8 0x348 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__FLEXSPI_A_SS1_B                     0x0E8 0x348 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE                       0x0E8 0x348 0x630 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE1_B__I2C4_SCL                            0x0E8 0x348 0x5BC 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02                          0x0E8 0x348 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE1_B__CORESIGHT_TRACE00                   0x0E8 0x348 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__NAND_CE2_B                          0x0EC 0x34C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__FLEXSPI_B_SS0_B                     0x0EC 0x34C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5                        0x0EC 0x34C 0x624 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE2_B__I2C4_SDA                            0x0EC 0x34C 0x5C0 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CE2_B__GPIO3_IO03                          0x0EC 0x34C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE2_B__CORESIGHT_TRACE01                   0x0EC 0x34C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__NAND_CE3_B                          0x0F0 0x350 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__FLEXSPI_B_SS1_B                     0x0F0 0x350 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6                        0x0F0 0x350 0x628 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__I2C3_SDA                            0x0F0 0x350 0x5B8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_CE3_B__GPIO3_IO04                          0x0F0 0x350 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CE3_B__CORESIGHT_TRACE02                   0x0F0 0x350 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_CLE__NAND_CLE                              0x0F4 0x354 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_CLE__FLEXSPI_B_SCLK                        0x0F4 0x354 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7                          0x0F4 0x354 0x62C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DCE_RX                          0x0F4 0x354 0x600 0x4 0x2
+#define MX8MP_IOMUXC_NAND_CLE__UART4_DTE_TX                          0x0F4 0x354 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_CLE__GPIO3_IO05                            0x0F4 0x354 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_CLE__CORESIGHT_TRACE03                     0x0F4 0x354 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__NAND_DATA00                        0x0F8 0x358 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00                   0x0F8 0x358 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__AUDIOMIX_SAI3_RX_DATA00            0x0F8 0x358 0x4E4 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__ISP_FLASH_TRIG_0                   0x0F8 0x358 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX                       0x0F8 0x358 0x600 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA00__UART4_DTE_TX                       0x0F8 0x358 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06                         0x0F8 0x358 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA00__CORESIGHT_TRACE04                  0x0F8 0x358 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__NAND_DATA01                        0x0FC 0x35C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01                   0x0FC 0x35C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC              0x0FC 0x35C 0x4EC 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__ISP_PRELIGHT_TRIG_0                0x0FC 0x35C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DCE_TX                       0x0FC 0x35C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__UART4_DTE_RX                       0x0FC 0x35C 0x600 0x4 0x4
+#define MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07                         0x0FC 0x35C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA01__CORESIGHT_TRACE05                  0x0FC 0x35C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__NAND_DATA02                        0x100 0x360 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02                   0x100 0x360 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__USDHC3_CD_B                        0x100 0x360 0x608 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS                      0x100 0x360 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__UART4_DTE_RTS                      0x100 0x360 0x5FC 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__I2C4_SDA                           0x100 0x360 0x5C0 0x4 0x3
+#define MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08                         0x100 0x360 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA02__CORESIGHT_TRACE06                  0x100 0x360 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__NAND_DATA03                        0x104 0x364 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03                   0x104 0x364 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__USDHC3_WP                          0x104 0x364 0x634 0x2 0x2
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS                      0x104 0x364 0x5FC 0x3 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__UART4_DTE_CTS                      0x104 0x364 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__ISP_FL_TRIG_1                      0x104 0x364 0x5D8 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09                         0x104 0x364 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA03__CORESIGHT_TRACE07                  0x104 0x364 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__NAND_DATA04                        0x108 0x368 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_B_DATA00                   0x108 0x368 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0                       0x108 0x368 0x610 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__FLEXSPI_A_DATA04                   0x108 0x368 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__ISP_SHUTTER_TRIG_1                 0x108 0x368 0x5E0 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DATA04__GPIO3_IO10                         0x108 0x368 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA04__CORESIGHT_TRACE08                  0x108 0x368 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__NAND_DATA05                        0x10C 0x36C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_B_DATA01                   0x10C 0x36C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1                       0x10C 0x36C 0x614 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA05__FLEXSPI_A_DATA05                   0x10C 0x36C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__ISP_FLASH_TRIG_1                   0x10C 0x36C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__GPIO3_IO11                         0x10C 0x36C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA05__CORESIGHT_TRACE09                  0x10C 0x36C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__NAND_DATA06                        0x110 0x370 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_B_DATA02                   0x110 0x370 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2                       0x110 0x370 0x618 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA06__FLEXSPI_A_DATA06                   0x110 0x370 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__ISP_PRELIGHT_TRIG_1                0x110 0x370 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__GPIO3_IO12                         0x110 0x370 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA06__CORESIGHT_TRACE10                  0x110 0x370 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__NAND_DATA07                        0x114 0x374 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_B_DATA03                   0x114 0x374 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3                       0x114 0x374 0x61C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_DATA07__FLEXSPI_A_DATA07                   0x114 0x374 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__ISP_SHUTTER_OPEN_1                 0x114 0x374 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__GPIO3_IO13                         0x114 0x374 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DATA07__CORESIGHT_TRACE11                  0x114 0x374 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_DQS__NAND_DQS                              0x118 0x378 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS                         0x118 0x378 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_DQS__AUDIOMIX_SAI3_MCLK                    0x118 0x378 0x4E0 0x2 0x0
+#define MX8MP_IOMUXC_NAND_DQS__ISP_SHUTTER_OPEN_0                    0x118 0x378 0x000 0x3 0x0
+#define MX8MP_IOMUXC_NAND_DQS__I2C3_SCL                              0x118 0x378 0x5B4 0x4 0x1
+#define MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14                            0x118 0x378 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_DQS__CORESIGHT_TRACE12                     0x118 0x378 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__NAND_RE_B                            0x11C 0x37C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__FLEXSPI_B_DQS                        0x11C 0x37C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4                         0x11C 0x37C 0x620 0x2 0x1
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DCE_TX                         0x11C 0x37C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__UART4_DTE_RX                         0x11C 0x37C 0x600 0x4 0x5
+#define MX8MP_IOMUXC_NAND_RE_B__GPIO3_IO15                           0x11C 0x37C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_RE_B__CORESIGHT_TRACE13                    0x11C 0x37C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__NAND_READY_B                      0x120 0x380 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B                    0x120 0x380 0x000 0x2 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__I2C3_SCL                          0x120 0x380 0x5B4 0x4 0x2
+#define MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16                        0x120 0x380 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_READY_B__CORESIGHT_TRACE14                 0x120 0x380 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__NAND_WE_B                            0x124 0x384 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK                           0x124 0x384 0x604 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WE_B__I2C3_SDA                             0x124 0x384 0x5B8 0x4 0x2
+#define MX8MP_IOMUXC_NAND_WE_B__GPIO3_IO17                           0x124 0x384 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WE_B__CORESIGHT_TRACE15                    0x124 0x384 0x000 0x6 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__NAND_WP_B                            0x128 0x388 0x000 0x0 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD                           0x128 0x388 0x60C 0x2 0x1
+#define MX8MP_IOMUXC_NAND_WP_B__I2C4_SCL                             0x128 0x388 0x5BC 0x4 0x3
+#define MX8MP_IOMUXC_NAND_WP_B__GPIO3_IO18                           0x128 0x388 0x000 0x5 0x0
+#define MX8MP_IOMUXC_NAND_WP_B__CORESIGHT_EVENTO                     0x128 0x388 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x12C 0x38C 0x508 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00              0x12C 0x38C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT                             0x12C 0x38C 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXFS__I2C6_SCL                             0x12C 0x38C 0x5CC 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19                           0x12C 0x38C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x130 0x390 0x4F4 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_SAI1_TX_DATA01               0x130 0x390 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT                              0x130 0x390 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__I2C6_SDA                              0x130 0x390 0x5D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXC__AUDIOMIX_PDM_CLK                      0x130 0x390 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20                            0x130 0x390 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI5_RX_DATA00              0x134 0x394 0x4F8 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_SAI1_TX_DATA02              0x134 0x394 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT                             0x134 0x394 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL                             0x134 0x394 0x5C4 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_RXD0__AUDIOMIX_PDM_BIT_STREAM00            0x134 0x394 0x4C0 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21                           0x134 0x394 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_RX_DATA01              0x138 0x398 0x4FC 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_DATA03              0x138 0x398 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC                0x138 0x398 0x4D8 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC                0x138 0x398 0x510 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_PDM_BIT_STREAM01            0x138 0x398 0x4C4 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22                           0x138 0x398 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX                              0x138 0x398 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_RX_DATA02              0x13C 0x39C 0x500 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_DATA04              0x13C 0x39C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI1_TX_SYNC                0x13C 0x39C 0x4D8 0x2 0x1
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK                0x13C 0x39C 0x50C 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_PDM_BIT_STREAM02            0x13C 0x39C 0x4C8 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23                           0x13C 0x39C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX                              0x13C 0x39C 0x54C 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_RX_DATA03              0x140 0x3A0 0x504 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_DATA05              0x140 0x3A0 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI1_TX_SYNC                0x140 0x3A0 0x4D8 0x2 0x2
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00              0x140 0x3A0 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_PDM_BIT_STREAM03            0x140 0x3A0 0x4CC 0x4 0x3
+#define MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24                           0x140 0x3A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX                              0x140 0x3A0 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI5_MCLK                   0x144 0x3A4 0x4F0 0x0 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x144 0x3A4 0x4D4 0x1 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__PWM1_OUT                             0x144 0x3A4 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA                             0x144 0x3A4 0x5C8 0x3 0x1
+#define MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25                           0x144 0x3A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX                              0x144 0x3A4 0x550 0x6 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__AUDIOMIX_SAI1_RX_SYNC                0x148 0x3A8 0x4D0 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN                 0x148 0x3A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00                           0x148 0x3A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_SAI1_RX_BCLK                 0x14C 0x3AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__AUDIOMIX_PDM_CLK                      0x14C 0x3AC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT                 0x14C 0x3AC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01                            0x14C 0x3AC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00              0x150 0x3B0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_TX_DATA01              0x150 0x3B0 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_PDM_BIT_STREAM00            0x150 0x3B0 0x4C0 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN                 0x150 0x3B0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02                           0x150 0x3B0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_SAI1_RX_DATA01              0x154 0x3B4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__AUDIOMIX_PDM_BIT_STREAM01            0x154 0x3B4 0x4C4 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT                0x154 0x3B4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03                           0x154 0x3B4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_SAI1_RX_DATA02              0x158 0x3B8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__AUDIOMIX_PDM_BIT_STREAM02            0x158 0x3B8 0x4C8 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC                            0x158 0x3B8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04                           0x158 0x3B8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_SAI1_RX_DATA03              0x15C 0x3BC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD3__AUDIOMIX_PDM_BIT_STREAM03            0x15C 0x3BC 0x4CC 0x3 0x4
+#define MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO                           0x15C 0x3BC 0x57C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05                           0x15C 0x3BC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI1_RX_DATA04              0x160 0x3C0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK                0x160 0x3C0 0x524 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_RX_BCLK                0x160 0x3C0 0x518 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0                      0x160 0x3C0 0x580 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06                           0x160 0x3C0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_DATA05              0x164 0x3C4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_TX_DATA00              0x164 0x3C4 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00              0x164 0x3C4 0x51C 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI1_RX_SYNC                0x164 0x3C4 0x4D0 0x3 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1                      0x164 0x3C4 0x584 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07                           0x164 0x3C4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI1_RX_DATA06              0x168 0x3C8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_TX_SYNC                0x168 0x3C8 0x528 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__AUDIOMIX_SAI6_RX_SYNC                0x168 0x3C8 0x520 0x2 0x1
+#define MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2                      0x168 0x3C8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08                           0x168 0x3C8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_RX_DATA07              0x16C 0x3CC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI6_MCLK                   0x16C 0x3CC 0x514 0x1 0x1
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_SYNC                0x16C 0x3CC 0x4D8 0x2 0x3
+#define MX8MP_IOMUXC_SAI1_RXD7__AUDIOMIX_SAI1_TX_DATA04              0x16C 0x3CC 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3                      0x16C 0x3CC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09                           0x16C 0x3CC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXFS__AUDIOMIX_SAI1_TX_SYNC                0x170 0x3D0 0x4D8 0x0 0x4
+#define MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL                   0x170 0x3D0 0x588 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXFS__GPIO4_IO10                           0x170 0x3D0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__AUDIOMIX_SAI1_TX_BCLK                 0x174 0x3D4 0x4D4 0x0 0x1
+#define MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC                       0x174 0x3D4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11                            0x174 0x3D4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__AUDIOMIX_SAI1_TX_DATA00              0x178 0x3D8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0                      0x178 0x3D8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12                           0x178 0x3D8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__AUDIOMIX_SAI1_TX_DATA01              0x17C 0x3DC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1                      0x17C 0x3DC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13                           0x17C 0x3DC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__AUDIOMIX_SAI1_TX_DATA02              0x180 0x3E0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2                      0x180 0x3E0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14                           0x180 0x3E0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__AUDIOMIX_SAI1_TX_DATA03              0x184 0x3E4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3                      0x184 0x3E4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15                           0x184 0x3E4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI1_TX_DATA04              0x188 0x3E8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_RX_BCLK                0x188 0x3E8 0x518 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__AUDIOMIX_SAI6_TX_BCLK                0x188 0x3E8 0x524 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL                   0x188 0x3E8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16                           0x188 0x3E8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI1_TX_DATA05              0x18C 0x3EC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_RX_DATA00              0x18C 0x3EC 0x51C 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00              0x18C 0x3EC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC                      0x18C 0x3EC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17                           0x18C 0x3EC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI1_TX_DATA06              0x190 0x3F0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_RX_SYNC                0x190 0x3F0 0x520 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC                0x190 0x3F0 0x528 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER                          0x190 0x3F0 0x58C 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18                           0x190 0x3F0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI1_TX_DATA07              0x194 0x3F4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK                   0x194 0x3F4 0x514 0x1 0x2
+#define MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_PDM_CLK                     0x194 0x3F4 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__ENET1_TX_ER                          0x194 0x3F4 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19                           0x194 0x3F4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK                   0x198 0x3F8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_TX_BCLK                0x198 0x3F8 0x4D4 0x2 0x2
+#define MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK                         0x198 0x3F8 0x578 0x4 0x1
+#define MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20                           0x198 0x3F8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC                0x19C 0x3FC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_SYNC                0x19C 0x3FC 0x510 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI5_TX_DATA01              0x19C 0x3FC 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x19C 0x3FC 0x4DC 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX                         0x19C 0x3FC 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__UART1_DTE_RX                         0x19C 0x3FC 0x5E8 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21                           0x19C 0x3FC 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_PDM_BIT_STREAM02            0x19C 0x3FC 0x4C8 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI2_RX_BCLK                 0x1A0 0x400 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_SAI5_TX_BCLK                 0x1A0 0x400 0x50C 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_RXC__CAN1_TX                               0x1A0 0x400 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX                          0x1A0 0x400 0x5E8 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_RXC__UART1_DTE_TX                          0x1A0 0x400 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22                            0x1A0 0x400 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXC__AUDIOMIX_PDM_BIT_STREAM01             0x1A0 0x400 0x4C4 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00              0x1A4 0x404 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI5_TX_DATA00              0x1A4 0x404 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT             0x1A4 0x404 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_TX_DATA01              0x1A4 0x404 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS                        0x1A4 0x404 0x5E4 0x4 0x2
+#define MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS                        0x1A4 0x404 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23                           0x1A4 0x404 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_PDM_BIT_STREAM03            0x1A4 0x404 0x4CC 0x6 0x5
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC                0x1A8 0x408 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI5_TX_DATA01              0x1A8 0x408 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__ENET_QOS_1588_EVENT3_OUT             0x1A8 0x408 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1A8 0x408 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS                        0x1A8 0x408 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS                        0x1A8 0x408 0x5E4 0x4 0x3
+#define MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24                           0x1A8 0x408 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_PDM_BIT_STREAM02            0x1A8 0x408 0x4C8 0x6 0x6
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK                 0x1AC 0x40C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI5_TX_DATA02               0x1AC 0x40C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__CAN1_RX                               0x1AC 0x40C 0x54C 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25                            0x1AC 0x40C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_PDM_BIT_STREAM01             0x1AC 0x40C 0x4C4 0x6 0x6
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00              0x1B0 0x410 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI5_TX_DATA03              0x1B0 0x410 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN              0x1B0 0x410 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX                              0x1B0 0x410 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_AUX_IN          0x1B0 0x410 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26                           0x1B0 0x410 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK                   0x1B4 0x414 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI5_MCLK                   0x1B4 0x414 0x4F0 0x1 0x2
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_IN              0x1B4 0x414 0x000 0x2 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX                              0x1B4 0x414 0x550 0x3 0x1
+#define MX8MP_IOMUXC_SAI2_MCLK__ENET_QOS_1588_EVENT3_AUX_IN          0x1B4 0x414 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27                           0x1B4 0x414 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI3_MCLK                   0x1B4 0x414 0x4E0 0x6 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_SYNC                0x1B8 0x418 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI2_RX_DATA01              0x1B8 0x418 0x4DC 0x1 0x1
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI5_RX_SYNC                0x1B8 0x418 0x508 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01              0x1B8 0x418 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SPDIF1_IN                   0x1B8 0x418 0x544 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28                           0x1B8 0x418 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_PDM_BIT_STREAM00            0x1B8 0x418 0x4C0 0x6 0x5
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI3_RX_BCLK                 0x1BC 0x41C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI2_RX_DATA02               0x1BC 0x41C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_SAI5_RX_BCLK                 0x1BC 0x41C 0x4F4 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPT1_CLK                              0x1BC 0x41C 0x59C 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS                         0x1BC 0x41C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__UART2_DTE_RTS                         0x1BC 0x41C 0x5EC 0x4 0x2
+#define MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29                            0x1BC 0x41C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXC__AUDIOMIX_PDM_CLK                      0x1BC 0x41C 0x000 0x6 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00               0x1C0 0x420 0x4E4 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI2_RX_DATA03               0x1C0 0x420 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI5_RX_DATA00               0x1C0 0x420 0x4F8 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS                         0x1C0 0x420 0x5EC 0x4 0x3
+#define MX8MP_IOMUXC_SAI3_RXD__UART2_DTE_CTS                         0x1C0 0x420 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30                            0x1C0 0x420 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_PDM_BIT_STREAM01             0x1C0 0x420 0x4C4 0x6 0x7
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC                0x1C4 0x424 0x4EC 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI2_TX_DATA01              0x1C4 0x424 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI5_RX_DATA01              0x1C4 0x424 0x4FC 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01              0x1C4 0x424 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DCE_RX                         0x1C4 0x424 0x5F0 0x4 0x4
+#define MX8MP_IOMUXC_SAI3_TXFS__UART2_DTE_TX                         0x1C4 0x424 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31                           0x1C4 0x424 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_PDM_BIT_STREAM03            0x1C4 0x424 0x4CC 0x6 0x6
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK                 0x1C8 0x428 0x4E8 0x0 0x1
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI2_TX_DATA02               0x1C8 0x428 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI5_RX_DATA02               0x1C8 0x428 0x500 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXC__GPT1_CAPTURE1                         0x1C8 0x428 0x594 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DCE_TX                          0x1C8 0x428 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__UART2_DTE_RX                          0x1C8 0x428 0x5F0 0x4 0x5
+#define MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00                            0x1C8 0x428 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_PDM_BIT_STREAM02             0x1C8 0x428 0x4C8 0x6 0x7
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00               0x1CC 0x42C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI2_TX_DATA03               0x1CC 0x42C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI5_RX_DATA03               0x1CC 0x42C 0x504 0x2 0x2
+#define MX8MP_IOMUXC_SAI3_TXD__GPT1_CAPTURE2                         0x1CC 0x42C 0x598 0x3 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SPDIF1_EXT_CLK               0x1CC 0x42C 0x548 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01                            0x1CC 0x42C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK                   0x1D0 0x430 0x4E0 0x0 0x2
+#define MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT                             0x1D0 0x430 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI5_MCLK                   0x1D0 0x430 0x4F0 0x2 0x3
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_OUT                  0x1D0 0x430 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02                           0x1D0 0x430 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SPDIF1_IN                   0x1D0 0x430 0x544 0x6 0x3
+#define MX8MP_IOMUXC_SPDIF_TX__AUDIOMIX_SPDIF1_OUT                   0x1D4 0x434 0x000 0x0 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT                              0x1D4 0x434 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL                              0x1D4 0x434 0x5C4 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_TX__GPT1_COMPARE1                         0x1D4 0x434 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__CAN1_TX                               0x1D4 0x434 0x000 0x4 0x0
+#define MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03                            0x1D4 0x434 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__AUDIOMIX_SPDIF1_IN                    0x1D8 0x438 0x544 0x0 0x4
+#define MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT                              0x1D8 0x438 0x000 0x1 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA                              0x1D8 0x438 0x5C8 0x2 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPT1_COMPARE2                         0x1D8 0x438 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_RX__CAN1_RX                               0x1D8 0x438 0x54C 0x4 0x2
+#define MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04                            0x1D8 0x438 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPT1_COMPARE3                    0x1DC 0x43C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05                       0x1DC 0x43C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__AUDIOMIX_SPDIF1_EXT_CLK          0x1DC 0x43C 0x548 0x0 0x1
+#define MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT                         0x1DC 0x43C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK                        0x1E0 0x440 0x558 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX                       0x1E0 0x440 0x5F8 0x1 0x4
+#define MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DTE_TX                       0x1E0 0x440 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL                           0x1E0 0x440 0x5A4 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__AUDIOMIX_SAI7_RX_SYNC              0x1E0 0x440 0x538 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SCLK__GPIO5_IO06                         0x1E0 0x440 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI                        0x1E4 0x444 0x560 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX                       0x1E4 0x444 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DTE_RX                       0x1E4 0x444 0x5F8 0x1 0x5
+#define MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA                           0x1E4 0x444 0x5A8 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__AUDIOMIX_SAI7_RX_BCLK              0x1E4 0x444 0x530 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07                         0x1E4 0x444 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO                        0x1E8 0x448 0x55C 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS                      0x1E8 0x448 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_MISO__UART3_DTE_RTS                      0x1E8 0x448 0x5F4 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI1_MISO__I2C2_SCL                           0x1E8 0x448 0x5AC 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__AUDIOMIX_SAI7_RX_DATA00            0x1E8 0x448 0x534 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08                         0x1E8 0x448 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__ECSPI1_SS0                          0x1EC 0x44C 0x564 0x0 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS                       0x1EC 0x44C 0x5F4 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI1_SS0__UART3_DTE_CTS                       0x1EC 0x44C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI1_SS0__I2C2_SDA                            0x1EC 0x44C 0x5B0 0x2 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__AUDIOMIX_SAI7_TX_SYNC               0x1EC 0x44C 0x540 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09                          0x1EC 0x44C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK                        0x1F0 0x450 0x568 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX                       0x1F0 0x450 0x600 0x1 0x6
+#define MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DTE_TX                       0x1F0 0x450 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SCLK__I2C3_SCL                           0x1F0 0x450 0x5B4 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_SCLK__AUDIOMIX_SAI7_TX_BCLK              0x1F0 0x450 0x53C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10                         0x1F0 0x450 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI                        0x1F4 0x454 0x570 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX                       0x1F4 0x454 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DTE_RX                       0x1F4 0x454 0x600 0x1 0x7
+#define MX8MP_IOMUXC_ECSPI2_MOSI__I2C3_SDA                           0x1F4 0x454 0x5B8 0x2 0x3
+#define MX8MP_IOMUXC_ECSPI2_MOSI__AUDIOMIX_SAI7_TX_DATA00            0x1F4 0x454 0x000 0x3 0x0
+#define MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11                         0x1F4 0x454 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12                         0x1F8 0x458 0x000 0x5 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO                        0x1F8 0x458 0x56C 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS                      0x1F8 0x458 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_MISO__UART4_DTE_RTS                      0x1F8 0x458 0x5FC 0x1 0x2
+#define MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL                           0x1F8 0x458 0x5BC 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_MISO__AUDIOMIX_SAI7_MCLK                 0x1F8 0x458 0x52C 0x3 0x1
+#define MX8MP_IOMUXC_ECSPI2_MISO__CCM_CLKO1                          0x1F8 0x458 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0                          0x1FC 0x45C 0x574 0x0 0x1
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS                       0x1FC 0x45C 0x5FC 0x1 0x3
+#define MX8MP_IOMUXC_ECSPI2_SS0__UART4_DTE_CTS                       0x1FC 0x45C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA                            0x1FC 0x45C 0x5C0 0x2 0x4
+#define MX8MP_IOMUXC_ECSPI2_SS0__CCM_CLKO2                           0x1FC 0x45C 0x000 0x4 0x0
+#define MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13                          0x1FC 0x45C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL                              0x200 0x460 0x5A4 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SCL__ENET_QOS_MDC                          0x200 0x460 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK                           0x200 0x460 0x558 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14                            0x200 0x460 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA                              0x204 0x464 0x5A8 0x0 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ENET_QOS_MDIO                         0x204 0x464 0x590 0x1 0x2
+#define MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI                           0x204 0x464 0x560 0x3 0x1
+#define MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15                            0x204 0x464 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL                              0x208 0x468 0x5AC 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_IN               0x208 0x468 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__USDHC3_CD_B                           0x208 0x468 0x608 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO                           0x208 0x468 0x55C 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SCL__ENET_QOS_1588_EVENT1_AUX_IN           0x208 0x468 0x000 0x4 0x0
+#define MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16                            0x208 0x468 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA                              0x20C 0x46C 0x5B0 0x0 0x2
+#define MX8MP_IOMUXC_I2C2_SDA__ENET_QOS_1588_EVENT1_OUT              0x20C 0x46C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C2_SDA__USDHC3_WP                             0x20C 0x46C 0x634 0x2 0x3
+#define MX8MP_IOMUXC_I2C2_SDA__ECSPI1_SS0                            0x20C 0x46C 0x564 0x3 0x1
+#define MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17                            0x20C 0x46C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL                              0x210 0x470 0x5B4 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SCL__PWM4_OUT                              0x210 0x470 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__GPT2_CLK                              0x210 0x470 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SCL__ECSPI2_SCLK                           0x210 0x470 0x568 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18                            0x210 0x470 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA                              0x214 0x474 0x5B8 0x0 0x4
+#define MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT                              0x214 0x474 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__GPT3_CLK                              0x214 0x474 0x000 0x2 0x0
+#define MX8MP_IOMUXC_I2C3_SDA__ECSPI2_MOSI                           0x214 0x474 0x570 0x3 0x2
+#define MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19                            0x214 0x474 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL                              0x218 0x478 0x5BC 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SCL__PWM2_OUT                              0x218 0x478 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B                         0x218 0x478 0x5A0 0x2 0x0
+#define MX8MP_IOMUXC_I2C4_SCL__ECSPI2_MISO                           0x218 0x478 0x56C 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20                            0x218 0x478 0x000 0x5 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA                              0x21C 0x47C 0x5C0 0x0 0x5
+#define MX8MP_IOMUXC_I2C4_SDA__PWM1_OUT                              0x21C 0x47C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_I2C4_SDA__ECSPI2_SS0                            0x21C 0x47C 0x574 0x3 0x2
+#define MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21                            0x21C 0x47C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX                         0x220 0x480 0x5E8 0x0 0x4
+#define MX8MP_IOMUXC_UART1_RXD__UART1_DTE_TX                         0x220 0x480 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK                          0x220 0x480 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22                           0x220 0x480 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX                         0x224 0x484 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART1_TXD__UART1_DTE_RX                         0x224 0x484 0x5E8 0x0 0x5
+#define MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI                          0x224 0x484 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23                           0x224 0x484 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX                         0x228 0x488 0x5F0 0x0 0x6
+#define MX8MP_IOMUXC_UART2_RXD__UART2_DTE_TX                         0x228 0x488 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO                          0x228 0x488 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPT1_COMPARE3                        0x228 0x488 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_RXD__GPIO5_IO24                           0x228 0x488 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX                         0x22C 0x48C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART2_TXD__UART2_DTE_RX                         0x22C 0x48C 0x5F0 0x0 0x7
+#define MX8MP_IOMUXC_UART2_TXD__ECSPI3_SS0                           0x22C 0x48C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPT1_COMPARE2                        0x22C 0x48C 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25                           0x22C 0x48C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX                         0x230 0x490 0x5F8 0x0 0x6
+#define MX8MP_IOMUXC_UART3_RXD__UART3_DTE_TX                         0x230 0x490 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS                        0x230 0x490 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS                        0x230 0x490 0x5E4 0x1 0x4
+#define MX8MP_IOMUXC_UART3_RXD__USDHC3_RESET_B                       0x230 0x490 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPT1_CAPTURE2                        0x230 0x490 0x598 0x3 0x1
+#define MX8MP_IOMUXC_UART3_RXD__CAN2_TX                              0x230 0x490 0x000 0x4 0x0
+#define MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26                           0x230 0x490 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX                         0x234 0x494 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART3_TXD__UART3_DTE_RX                         0x234 0x494 0x5F8 0x0 0x7
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS                        0x234 0x494 0x5E4 0x1 0x5
+#define MX8MP_IOMUXC_UART3_TXD__UART1_DTE_CTS                        0x234 0x494 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART3_TXD__USDHC3_VSELECT                       0x234 0x494 0x000 0x2 0x0
+#define MX8MP_IOMUXC_UART3_TXD__GPT1_CLK                             0x234 0x494 0x59C 0x3 0x1
+#define MX8MP_IOMUXC_UART3_TXD__CAN2_RX                              0x234 0x494 0x550 0x4 0x2
+#define MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27                           0x234 0x494 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX                         0x238 0x498 0x600 0x0 0x8
+#define MX8MP_IOMUXC_UART4_RXD__UART4_DTE_TX                         0x238 0x498 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS                        0x238 0x498 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_RXD__UART2_DTE_RTS                        0x238 0x498 0x5EC 0x1 0x4
+#define MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B                        0x238 0x498 0x5A0 0x2 0x1
+#define MX8MP_IOMUXC_UART4_RXD__GPT1_COMPARE1                        0x238 0x498 0x000 0x3 0x0
+#define MX8MP_IOMUXC_UART4_RXD__I2C6_SCL                             0x238 0x498 0x5CC 0x4 0x2
+#define MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28                           0x238 0x498 0x000 0x5 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX                         0x23C 0x49C 0x000 0x0 0x0
+#define MX8MP_IOMUXC_UART4_TXD__UART4_DTE_RX                         0x23C 0x49C 0x600 0x0 0x9
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS                        0x23C 0x49C 0x5EC 0x1 0x5
+#define MX8MP_IOMUXC_UART4_TXD__UART2_DTE_CTS                        0x23C 0x49C 0x000 0x1 0x0
+#define MX8MP_IOMUXC_UART4_TXD__GPT1_CAPTURE1                        0x23C 0x49C 0x594 0x3 0x1
+#define MX8MP_IOMUXC_UART4_TXD__I2C6_SDA                             0x23C 0x49C 0x5D0 0x4 0x2
+#define MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29                           0x23C 0x49C 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL                  0x240 0x4A0 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL                          0x240 0x4A0 0x5C4 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__CAN1_TX                           0x240 0x4A0 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26                        0x240 0x4A0 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA                  0x244 0x4A4 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA                          0x244 0x4A4 0x5C8 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__CAN1_RX                           0x244 0x4A4 0x54C 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27                        0x244 0x4A4 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC                      0x248 0x4A8 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__I2C6_SCL                              0x248 0x4A8 0x5CC 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_CEC__CAN2_TX                               0x248 0x4A8 0x000 0x4 0x0
+#define MX8MP_IOMUXC_HDMI_CEC__GPIO3_IO28                            0x248 0x4A8 0x000 0x5 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD                      0x24C 0x4AC 0x000 0x0 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__AUDIOMIX_HDMI_HPD_O                   0x24C 0x4AC 0x000 0x1 0x0
+#define MX8MP_IOMUXC_HDMI_HPD__I2C6_SDA                              0x24C 0x4AC 0x5D0 0x3 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__CAN2_RX                               0x24C 0x4AC 0x550 0x4 0x3
+#define MX8MP_IOMUXC_HDMI_HPD__GPIO3_IO29                            0x24C 0x4AC 0x000 0x5 0x0
+
+#endif /* __DTS_IMX8MP_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
new file mode 100644
index 000000000..ea44d6053
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds.dtso
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+};
+
+&backlight_lvds {
+	status = "okay";
+};
+
+&display {
+	compatible = "tianma,tm070jvhg33";
+	status = "okay";
+
+	panel-timing {
+		clock-frequency = <74250000>;
+		hactive = <1280>;
+		vactive = <800>;
+		hfront-porch = <64>;
+		hback-porch = <5>;
+		hsync-len = <1>;
+		vfront-porch = <40>;
+		vback-porch = <2>;
+		vsync-len = <1>;
+		de-active = <1>;
+	};
+
+	port {
+		panel_in_lvds0: endpoint {
+			remote-endpoint = <&ldb_lvds_ch0>;
+		};
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	status = "okay";
+
+	ports {
+		port@1 {
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
new file mode 100644
index 000000000..4240e20d3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -0,0 +1,960 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
+	compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>;
+	};
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+		spi3 = &ecspi3;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_vcc_12v0>;
+		enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwmfan>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobutton>;
+		autorepeat;
+
+		switch-1 {
+			label = "S12";
+			linux,code = <BTN_0>;
+			gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "S13";
+			linux,code = <BTN_1>;
+			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvdsdisplay>;
+		power-supply = <&reg_vcc_3v3>;
+		enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight_lvds>;
+		status = "disabled";
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpwmfan>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vcc_12v0>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		off-on-delay-us = <12000>;
+	};
+
+	reg_vcc_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg12v0>;
+		regulator-name = "VCC_12V0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ocram: ocram@900000 {
+			no-map;
+			reg = <0 0x900000 0 0x70000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x38000000>;
+			alloc-ranges = <0 0x40000000 0 0xB0000000>;
+			linux,cma-default;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "tq-tlv320aic32x";
+		audio-cpu = <&sai3>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+
+	thermal-zones {
+		soc-thermal {
+			trips {
+				soc_active0: trip-active0 {
+					temperature = <40000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				soc_active1: trip-active1 {
+					temperature = <48000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+
+				soc_active2: trip-active2 {
+					temperature = <60000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&soc_active0>;
+					cooling-device = <&fan0 1 1>;
+				};
+
+				map2 {
+					trip = <&soc_active1>;
+					cooling-device = <&fan0 2 2>;
+				};
+
+				map3 {
+					trip = <&soc_active2>;
+					cooling-device = <&fan0 3 3>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		reg = <0>;
+		compatible = "microchip,mcp3202";
+		/* 100 ksps * 18 */
+		spi-max-frequency = <1800000>;
+		vref-supply = <&reg_vcc_3v3>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_vcc_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>;
+
+	gpio-line-names = "GPO1", "GPO0", "", "GPO3",
+			  "", "", "GPO2", "GPI0",
+			  "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
+			  "OTG_PWR", "", "GPI2", "GPI3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hoggpio2>;
+
+	gpio-line-names = "", "", "", "",
+			  "", "", "VCC12V_EN", "PERST#",
+			  "", "", "CLKREQ#", "PEWAKE#",
+			  "USDHC2_CD", "", "", "",
+			  "", "", "", "V_SD3V3_EN",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	perst-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-high;
+		line-name = "PERST#";
+	};
+
+	clkreq-hog {
+		gpio-hog;
+		gpios = <10 0>;
+		input;
+		line-name = "CLKREQ#";
+	};
+
+	pewake-hog {
+		gpio-hog;
+		gpios = <11 0>;
+		input;
+		line-name = "PEWAKE#";
+	};
+};
+
+&gpio3 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "LVDS0_RESET#", "",
+			  "", "", "", "LVDS0_BLT_EN",
+			  "LVDS0_PWR_EN", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+
+	gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "DP_IRQ", "DSI_EN",
+			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
+			  "", "", "", "FAN_PWR",
+			  "RTC_EVENT#", "CODEC_RST#", "", "";
+
+	pcie-refclkreq-hog {
+		gpio-hog;
+		gpios = <22 0>;
+		output-high;
+		line-name = "PCIE_REFCLK_OE#";
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "LED2",
+			  "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
+			  "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
+			  "", "ECSPI2_SS0", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
+			  "", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tlv320aic3x04>;
+		reg = <0x18>;
+		clock-names = "mclk";
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	at24c02_54: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	pcieclk: clock-generator@6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c6 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c6>;
+	pinctrl-1 = <&pinctrl_i2c6_gpio>;
+	scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa8MPxL */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,disable-port-power-control;
+	fsl,permanently-attached;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_vcc_5v0>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented, but not a full featured OTG */
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19		0x14>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x150>,
+			   <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x150>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x150>,
+			   <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x150>;
+	};
+
+	/* only on X57, primary used as CSI0 control signals */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c0>;
+	};
+
+	/* on X63 and optionally on X57, can also be used as CSI1 control signals */
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x1c0>,
+			   <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c0>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI		0x1c0>,
+			   <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO		0x1c0>,
+			   <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25		0x1c0>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x40000044>,
+			   <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x40000044>,
+			   <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x90>,
+			   <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x90>,
+			   <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90>,
+			   <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90>,
+			   <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x12>,
+			   <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x12>,
+			   <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x12>,
+			   <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x14>;
+	};
+
+	pinctrl_eqos_event: eqosevtgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT		0x100>,
+			   <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN		0x1c0>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02				0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03				0x1c0>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x40000044>,
+			   <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x90>,
+			   <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90>,
+			   <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x12>,
+			   <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x14>;
+	};
+
+	pinctrl_fec_event: fecevtgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN	0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x1c0>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x100>,
+			   <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x1c0>;
+	};
+
+	pinctrl_fec_phyalt: fecphyaltgrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x180>,
+			   <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x180>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26		0x10>,
+			   <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27		0x10>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x14>,
+			   <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04		0x14>,
+			   <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03		0x14>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x10>,
+			   <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x80>,
+			   <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x80>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x180>,
+			   <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x180>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c2>,
+			   <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000010>,
+			   <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000010>;
+	};
+
+	pinctrl_hoggpio2: hoggpio2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x140>,
+			   <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10	0x140>,
+			   <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x140>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001e2>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001e2>;
+	};
+
+	pinctrl_i2c6: i2c6grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c6_gpio: i2c6-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02		0x400001e2>,
+			   <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03		0x400001e2>;
+	};
+
+	pinctrl_lvdsdisplay: lvdsdisplaygrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x10>; /* Power enable */
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x80>;
+	};
+
+	/* LVDS Backlight */
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x14>;
+	};
+
+	/* FAN */
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT		0x14>;
+	};
+
+	pinctrl_pwmfan: pwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x80>; /* FAN RPM */
+	};
+
+	pinctrl_reg12v0: reg12v0grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x140>; /* VCC12V enable */
+	};
+
+	pinctrl_regpwmfan: regpwmfangrp {
+		fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x80>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x94
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x94
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x94
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x94
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0x94
+		>;
+	};
+
+	pinctrl_tlv320aic3x04: tlv320aic3x04grp {
+		fsl,pins = <
+			/* CODEC RST# */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x180
+		>;
+	};
+
+	/* X61 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX		0x140>,
+			   <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX		0x140>;
+	};
+
+	/* X61 */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140>,
+			   <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140>,
+			   <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x1c0>,
+			   <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR	0x1c0>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c0>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x10>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x192>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			   <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
new file mode 100644
index 000000000..ebc29a950
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@tq-group.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "TQ-Systems i.MX8MPlus TQMa8MPxL";
+	compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	/* identical to buck4_reg, but should never change */
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	status = "okay";
+
+	flash0: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pmic: pmic@25 {
+		reg = <0x25>;
+		compatible = "nxp,pca9450c";
+
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V85_SOC: 0.85 .. 0.95 */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VCC3V3 -> VMMC, ... must not be changed */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 -> RAM, ... must not be changed */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_SNVS */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_ANA */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* unused */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* VCC SD IO - switched using SD2 VSELECT */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+
+	at24c02: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		read-only;
+		reg = <0x53>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	m24c64: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK	0x142>,
+			   <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,
+			   <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001e2>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpiogrp {
+		fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001e2>,
+			   <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001e2>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x1c0>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
+			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
+			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			   <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x84>,
+			   <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x84>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x1c4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
new file mode 100644
index 000000000..560c68e4d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	aliases {
+		ethernet0 = &eqos;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck3_reg>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0x0>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_1p0";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_1p8";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_2p5";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_soc";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_arm";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@0 {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+
+	pmic@69 {
+		compatible = "mps,mp5416";
+		reg = <0x69>;
+
+		regulators {
+			/* vdd_soc */
+			buck1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_dram */
+			buck2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_arm */
+			buck3_reg: buck3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vdd_1p8 */
+			buck4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT2: nvcc_snvs_1p8 */
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT3: vdd_1p0 */
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT4: vdd_2p5 */
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* OUT5: vdd_3p3 */
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+/* off-board header */
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* off-board */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x140 /* RST# */
+			MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c2
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts
new file mode 100644
index 000000000..53120fc9c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw71xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW71xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw71xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
new file mode 100644
index 000000000..c531564c7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "", "",
+		"dio3", "", "dio2", "",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* USB1 Type-C front panel */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - MiniPCIe socket */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x40000146 /* DIO2 */
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24	0x40000146 /* DIO3 */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts
new file mode 100644
index 000000000..255e36f66
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw72xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW72xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw72xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
new file mode 100644
index 000000000..f3bab22d5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"", "", "", "rs485_half",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* off-board header */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - OTG */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* USB1_EN */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts
new file mode 100644
index 000000000..000fd15e0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw73xx.dtsi"
+
+/ {
+	model = "Gateworks Venice GW73xx-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw73xx-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
new file mode 100644
index 000000000..68c62def4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi
@@ -0,0 +1,414 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: clock-pcie0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: regulator-usb1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-name = "usb1_vbus";
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		regulator-name = "wl";
+		gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VDD_3V3_SD";
+		enable-active-high;
+		gpio = <&gpio2 19 0>; /* SD2_RESET */
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"dio1", "", "", "dio0",
+		"", "", "pci_usb_sel", "",
+		"", "", "", "",
+		"", "", "rs485_en", "rs485_term",
+		"", "", "", "rs485_half",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
+	cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* RS232 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - OTG */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		type = "micro";
+		label = "otg";
+		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08	0x40000146 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11	0x40000146 /* DIO0 */
+			MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14	0x40000106 /* PCIE_USBSEL */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x40000106 /* RS485_HALF */
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x40000106 /* RS485_EN */
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23	0x40000106 /* RS485_TERM */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCIE_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x150	/* IRQ */
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16	0x146
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x146
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x146
+		>;
+	};
+
+	pinctrl_reg_usb1_en: regusb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* USB1_EN */
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140 /* USB1_FLT# */
+		>;
+	};
+
+	pinctrl_usbcon1: usbcon1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140 /* USB1_ID */
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x146 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08	0x140
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
new file mode 100644
index 000000000..6a39f4343
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+	panel {
+		compatible = "powertip,ph800480t013-idf02";
+		power-supply = <&attiny>;
+		backlight = <&attiny>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	attiny: regulator@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
+		reg = <0x45>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,burst-clock-frequency = <891000000>;
+	samsung,esc-clock-frequency = <54000000>;
+	samsung,pll-clock-frequency = <27000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	bridge@0 {
+		compatible = "toshiba,tc358762";
+		reg = <0>;
+		vddc-supply = <&attiny>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
new file mode 100644
index 000000000..faa370a58
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -0,0 +1,1117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "Gateworks Venice GW74xx i.MX8MP board";
+	compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		ethernet2 = &lan1;
+		ethernet3 = &lan2;
+		ethernet4 = &lan3;
+		ethernet5 = &lan4;
+		ethernet6 = &lan5;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		key-1 {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-2 {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		key-3 {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		key-4 {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		key-5 {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_vbus: regulator-usb2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_usb2_vbus";
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can2>;
+		regulator-name = "can2_stby";
+		gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_wifi_en: regulator-wifi-en {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wifi>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "tcg,tpm_tis-spi";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		reg = <0x0>;
+		spi-max-frequency = <36000000>;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "dio0", "", "dio1", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "m2_pin20", "",
+		"", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
+		"", "", "pcie2_wdis#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "m2_rst", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "m2_off#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "m2_wdis#", "", "", "", "", "",
+		"", "", "", "", "", "", "", "rs485_en";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"rs485_hd", "rs485_term", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@16 {
+				gw,mode = <4>;
+				reg = <0x16>;
+				label = "fan_tach";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_adc1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_adc2";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_arm";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p2";
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			reg = <0x0a>;
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	accelerometer@19 {
+		compatible = "st,lis2de12";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+
+	switch: switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		pinctrl-0 = <&pinctrl_ksz>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lan1: port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan2: port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan3: port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan4: port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			lan5: port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+				local-mac-address = [00 00 00 00 00 00];
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&fec>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1045000>;
+				regulator-max-microvolt = <1155000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* off-board header */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS / off-board header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* bluetooth HCI */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+	cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel */
+&usb3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	fsl,over-current-active-low;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	status = "okay";
+
+	connector {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon1>;
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "Type-C";
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO WiFi */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wifi_en>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@0 {
+		compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
+		reg = <0>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09	0x40000040 /* DIO0 */
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11	0x40000040 /* DIO1 */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02	0x40000040 /* M2SKT_OFF# */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x40000150 /* M2SKT_WDIS# */
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06	0x40000040 /* M2SKT_PIN20 */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11	0x40000040 /* M2SKT_PIN22 */
+			MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13	0x40000150 /* PCIE1_WDIS# */
+			MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14	0x40000150 /* PCIE3_WDIS# */
+			MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18	0x40000150 /* PCIE2_WDIS# */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x40000040 /* M2SKT_RST# */
+			MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01	0x40000104 /* UART_TERM */
+			MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31	0x40000104 /* UART_RS485 */
+			MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00	0x40000104 /* UART_HALF */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07	0x150
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x2
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x2
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30		0x140 /* RST# */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x150 /* IRQ# */
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x16
+			MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN	0x140
+			MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT	0x140
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX		0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x150
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16	0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18	0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x400001c3
+		>;
+	};
+
+	pinctrl_ksz: kszgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x150 /* IRQ# */
+			MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02	0x140 /* RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: ledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15	0x10
+			MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16	0x10
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17	0x106
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x140
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x140
+		>;
+	};
+
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19	0x154
+		>;
+	};
+
+	pinctrl_reg_can2: regcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05	0x154
+		>;
+	};
+
+	pinctrl_reg_usb2: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06	0x140
+		>;
+	};
+
+	pinctrl_reg_wifi: regwifigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x110
+		>;
+	};
+
+	pinctrl_spi1: spi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x140
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x82
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21	0x140
+			MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22	0x140
+		>;
+	};
+
+	pinctrl_uart3_gpio: uart3gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x110
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usb1: usb1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC	0x140
+		>;
+	};
+
+	pinctrl_usbcon1: usb1congrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts
new file mode 100644
index 000000000..4a1bbbbe1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905-2x.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-venice-gw702x.dtsi"
+#include "imx8mp-venice-gw7905.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7905-2x i.MX8MP Development Kit";
+	compatible = "gateworks,imx8mp-gw7905-2x", "fsl,imx8mp";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+/* Disable SOM interfaces not used on baseboard */
+&eqos {
+	status = "disabled";
+};
+
+&usdhc1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi
new file mode 100644
index 000000000..0d40cb0f0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw7905.dtsi
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2023 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+/ {
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		compatible = "regulator-fixed";
+		regulator-name = "SD2_3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* off-board header */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "gpioa", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "gpiod", "", "",
+		"gpiob", "gpioc", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "pci_usb_sel", "",
+		"pci_wdis#", "", "", "";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+/* off-board header */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* USB1 - Type C front panel SINK port J14 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+/* USB2 4-port USB3.0 HUB:
+ *  P1 - USBC connector (host only)
+ *  P2 - USB2 test connector
+ *  P3 - miniPCIe full card
+ *  P4 - miniPCIe half card
+ */
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	fsl,permanently-attached;
+	fsl,disable-port-power-control;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40000040 /* GPIOA */
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01	0x40000040 /* GPIOD */
+			MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04	0x40000040 /* GPIOB */
+			MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05	0x40000040 /* GPIOC */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26	0x40000106 /* PCI_USBSEL */
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x40000106 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22	0x6	/* LEDG */
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27	0x6	/* LEDR */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c2
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x106
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x106
+		>;
+	};
+
+	pinctrl_reg_usb2_en: regusb2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12	0x6 /* USBHUB_RST# (ext p/u) */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_spi2: spi2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13	0x140
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
new file mode 100644
index 000000000..7e9e4b13b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mp-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1p8v>;
+		CPVDD-supply = <&reg_1p8v>;
+		DBVDD-supply = <&reg_1p8v>;
+		DCVDD-supply = <&reg_1p8v>;
+		MICVDD-supply = <&reg_1p8v>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin I2S_1 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
new file mode 100644
index 000000000..a509b2b7f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_eth2phy: regulator-eth2phy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
+		off-on-delay-us = <500000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "imx8mp-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&fec {
+	phy-supply = <&reg_eth2phy>;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&flexcan2 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+&gpio_expander_21 {
+	status = "okay";
+	vcc-supply = <&reg_1p8v>;
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin I2S_1 */
+&sai1 {
+	assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,permanently-attached;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+/* Limit frequency on dev board due to long traces and bad signal integrity */
+&usdhc2 {
+	max-frequency = <100000000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000..68147b0c1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Dahlia Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-dahlia",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000..879ff687c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-dev",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000..b28477df1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus on Yavia Board";
+	compatible = "toradex,verdin-imx8mp-nonwifi-yavia",
+		     "toradex,verdin-imx8mp-nonwifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
new file mode 100644
index 000000000..91d597391
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+&gpio5 {
+	gpio-line-names = "SODIMM_42",
+			  "SODIMM_46",
+			  "SODIMM_187",
+			  "SODIMM_20",
+			  "SODIMM_22",
+			  "SODIMM_15",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "SODIMM_164",
+			  "SODIMM_152",
+			  "SODIMM_116",
+			  "SODIMM_128",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "SODIMM_129",
+			  "SODIMM_131",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_147",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
+		    <&pinctrl_hdmi_hog>;
+};
+
+/*
+ * Verdin UART_4
+ * Often used by the M7 and then should not be enabled here.
+ */
+&uart4 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000..804567f6c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Dahlia Board";
+	compatible = "toradex,verdin-imx8mp-wifi-dahlia",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
new file mode 100644
index 000000000..c1713c28c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mp-wifi-dev",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts
new file mode 100644
index 000000000..100bef120
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-yavia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Plus WB on Yavia Board";
+	compatible = "toradex,verdin-imx8mp-wifi-yavia",
+		     "toradex,verdin-imx8mp-wifi",
+		     "toradex,verdin-imx8mp",
+		     "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
new file mode 100644
index 000000000..ef94f9a57
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "PDn_AW-CM276NF";
+		startup-delay-us = <2000>;
+	};
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_42",
+			  "SODIMM_46",
+			  "SODIMM_187",
+			  "SODIMM_20",
+			  "SODIMM_22",
+			  "SODIMM_15",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "SODIMM_129",
+			  "SODIMM_131",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_147",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
+		    <&pinctrl_hdmi_hog>;
+};
+
+/* On-module Bluetooth */
+&uart4 {
+	uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bt_uart>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "mrvl,88w8997";
+		max-speed = <921600>;
+	};
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_wifi_ctrl>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_wifi_ctrl>;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
new file mode 100644
index 000000000..db1722f0d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-yavia.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* Carrier Board Supply +V1.8 */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	/* Carrier Board Supply +V3.3 */
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_yavia>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&backlight {
+	power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Yavia board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&eqos {
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&hwmon_temp {
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+	vin-supply = <&reg_3p3v>;
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_yavia: ledsyaviagrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00	0x106	/* SODIMM 52 */
+			MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01	0x106	/* SODIMM 54 */
+			MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06	0x106	/* SODIMM 56 */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07	0x106	/* SODIMM 58 */
+			MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08	0x106	/* SODIMM 60 */
+			MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09	0x106	/* SODIMM 62 */
+		>;
+	};
+
+	pinctrl_gpios_ext_yavia: gpiosextyaviagrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02	0x106	/* SODIMM 64 */
+			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14	0x106	/* SODIMM 66 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
new file mode 100644
index 000000000..e9e4fcb56
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -0,0 +1,1438 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		/* Ethernet aliases to ensure correct MAC addresses */
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
+		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
+		power-supply = <&reg_3p3v>;
+		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
+		pwms = <&pwm3 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	backlight_mezzanine: backlight-mezzanine {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin GPIO 4 (SODIMM 212) */
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		/* Verdin PWM_2 (SODIMM 16) */
+		pwms = <&pwm2 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	/* Carrier Board Supplies */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "+V5_SW";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_module_eth1phy: regulator-module-eth1phy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
+		off-on-delay-us = <500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "On-module +V3.3_ETH";
+		startup-delay-us = <200000>;
+		vin-supply = <&reg_vdd_3v3>;
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_1_EN";
+	};
+
+	reg_usb2_vbus: regulator-usb2-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_2_EN (SODIMM 185) */
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_2_EN";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use the kernel configuration settings instead */
+		/delete-node/ linux,cma;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&cpu_alert0 {
+	temperature = <95000>;
+};
+
+&cpu_crit0 {
+	temperature = <105000>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_module_eth1phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			eee-broken-100tx;
+			eee-broken-1000t;
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+/* Verdin ETH_2_RGMII */
+&fec {
+	fsl,magic-packet;
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Verdin CAN_2 */
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_206",
+			  "SODIMM_208",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_210",
+			  "SODIMM_212",
+			  "SODIMM_216",
+			  "SODIMM_218",
+			  "",
+			  "",
+			  "SODIMM_16",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_185",
+			  "SODIMM_91";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_143",
+			  "SODIMM_141",
+			  "",
+			  "",
+			  "SODIMM_161",
+			  "",
+			  "SODIMM_84",
+			  "SODIMM_78",
+			  "SODIMM_74",
+			  "SODIMM_80",
+			  "SODIMM_82",
+			  "SODIMM_70",
+			  "SODIMM_72";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_66",
+			  "",
+			  "SODIMM_64",
+			  "",
+			  "",
+			  "SODIMM_34",
+			  "SODIMM_19",
+			  "",
+			  "SODIMM_32",
+			  "",
+			  "",
+			  "SODIMM_30",
+			  "SODIMM_59",
+			  "SODIMM_57",
+			  "SODIMM_63",
+			  "SODIMM_61";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_252",
+			  "SODIMM_222",
+			  "SODIMM_36",
+			  "SODIMM_220",
+			  "SODIMM_193",
+			  "SODIMM_191",
+			  "SODIMM_201",
+			  "SODIMM_203",
+			  "SODIMM_205",
+			  "SODIMM_207",
+			  "SODIMM_199",
+			  "SODIMM_197",
+			  "SODIMM_221",
+			  "SODIMM_219",
+			  "SODIMM_217",
+			  "SODIMM_215",
+			  "SODIMM_211",
+			  "SODIMM_213",
+			  "SODIMM_189",
+			  "SODIMM_244",
+			  "SODIMM_38",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_17",
+			  "SODIMM_24",
+			  "SODIMM_26",
+			  "SODIMM_21",
+			  "SODIMM_256",
+			  "SODIMM_48",
+			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
+};
+
+/* On-module I2C */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450c";
+		interrupt-parent = <&gpio1>;
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+
+		/*
+		 * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
+		 * I2C level shifter for the TLA2024 ADC behind this PMIC.
+		 */
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "On-module +VDD_SOC (BUCK1)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "On-module +VDD_ARM (BUCK2)";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "On-module +V3.3 (BUCK4)";
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "PWR_1V8_MOCI (BUCK5)";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "On-module +VDD_DDR (BUCK6)";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "On-module +V1.8_SNVS (LDO1)";
+			};
+
+			LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1150000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "On-module +V0.8_SNVS (LDO2)";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V1.8A (LDO3)";
+			};
+
+			LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "On-module +V3.3_ADC (LDO4)";
+			};
+
+			LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	/* On-module temperature sensor */
+	hwmon_temp_module: sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+		vs-supply = <&reg_vdd_1v8>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin I2C_1 (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	/* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
+	clock-frequency = <10000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
+		compatible = "atmel,maxtouch";
+		/* Verdin GPIO_3 (SODIMM 210) */
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x4a>;
+		/* Verdin GPIO_2 (SODIMM 208) */
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+};
+
+/* TODO: Verdin I2C_3_HDMI */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	gpio_expander_21: gpio-expander@21 {
+		compatible = "nxp,pcal6416";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x21>;
+		vcc-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	lvds_ti_sn65dsi84: bridge@2c {
+		compatible = "ti,sn65dsi84";
+		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x2c>;
+		status = "disabled";
+	};
+
+	/* Current measurement into module VCC */
+	hwmon: hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+		status = "disabled";
+	};
+
+	hdmi_lontium_lt8912: hdmi@48 {
+		compatible = "lontium,lt8912b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		reg = <0x48>;
+		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		/*
+		 * Verdin GPIO_9_DSI
+		 * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
+		 */
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
+		reg = <0x4a>;
+		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	/* Temperature sensor on carrier board */
+	hwmon_temp: sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+		status = "disabled";
+	};
+
+	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
+	eeprom_display_adapter: eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+		status = "disabled";
+	};
+
+	/* EEPROM on carrier board */
+	eeprom_carrier_board: eeprom@57 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x57>;
+		status = "disabled";
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_1>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_2>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_3>;
+	#pwm-cells = <3>;
+};
+
+/* TODO: Verdin I2S_1 */
+
+/* TODO: Verdin I2S_2 */
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_2 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+/* Verdin UART_4, used for Bluetooth on Wi-Fi/Bluetooth SKUs */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+	fsl,disable-port-power-control;
+	fsl,over-current-active-low;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_1_oc_n>;
+};
+
+&usb_dwc3_0 {
+	/* dual role only, not full featured OTG */
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	maximum-speed = "high-speed";
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		label = "Type-C";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_1_id>;
+		self-powered;
+		type = "micro";
+		vbus-supply = <&reg_usb1_vbus>;
+	};
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+	fsl,disable-port-power-control;
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usb2_vbus>;
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	status = "okay";
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt_uart: btuartgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS	0x1c4>,
+			<MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX		0x1c4>,
+			<MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX		0x1c4>,
+			<MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS		0x1c4>;
+	};
+
+	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29		0x1c4>;	/* SODIMM 256 */
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x1c4>,	/* SODIMM 198 */
+			<MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x4>,	/* SODIMM 200 */
+			<MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x4>,	/* SODIMM 196 */
+			<MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x1c4>;	/* SODIMM 202 */
+	};
+
+	/* Connection On Board PHY */
+	pinctrl_eqos: eqosgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC				0x3>,
+			<MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO				0x3>,
+			<MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0			0x91>,
+			<MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1			0x91>,
+			<MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2			0x91>,
+			<MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3			0x91>,
+			<MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91>,
+			<MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91>,
+			<MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0			0x1f>,
+			<MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1			0x1f>,
+			<MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2			0x1f>,
+			<MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3			0x1f>,
+			<MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f>,
+			<MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f>;
+	};
+
+	/* ETH_INT# shared with TPM_INT# (usually N/A) */
+	pinctrl_eth_tpm_int: ethtpmintgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x1c4>;
+	};
+
+	/* Connection Carrier Board PHY ETH_2 */
+	pinctrl_fec: fecgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,	/* SODIMM 193 */
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,	/* SODIMM 191 */
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,	/* SODIMM 201 */
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,	/* SODIMM 203 */
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,	/* SODIMM 205 */
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,	/* SODIMM 207 */
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,	/* SODIMM 197 */
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,	/* SODIMM 199 */
+			<MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0	0x1f>,	/* SODIMM 221 */
+			<MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1	0x1f>,	/* SODIMM 219 */
+			<MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2	0x1f>,	/* SODIMM 217 */
+			<MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3	0x1f>,	/* SODIMM 215 */
+			<MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f>,	/* SODIMM 211 */
+			<MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC	0x1f>,	/* SODIMM 213 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x1c4>;	/* SODIMM 189 */
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3>,	/* SODIMM 193 */
+			<MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3>,	/* SODIMM 191 */
+			<MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0	0x91>,	/* SODIMM 201 */
+			<MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1	0x91>,	/* SODIMM 203 */
+			<MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2	0x91>,	/* SODIMM 205 */
+			<MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3	0x91>,	/* SODIMM 207 */
+			<MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91>,	/* SODIMM 197 */
+			<MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91>,	/* SODIMM 199 */
+			<MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12		0x1f>,	/* SODIMM 221 */
+			<MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13		0x1f>,	/* SODIMM 219 */
+			<MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14		0x1f>,	/* SODIMM 217 */
+			<MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15		0x1f>,	/* SODIMM 215 */
+			<MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16		0x1f>,	/* SODIMM 211 */
+			<MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17		0x1f>,	/* SODIMM 213 */
+			<MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x184>;	/* SODIMM 189 */
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154>,	/* SODIMM 22 */
+			<MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154>;	/* SODIMM 20 */
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX		0x154>,	/* SODIMM 26 */
+			<MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX		0x154>;	/* SODIMM 24 */
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK		0x1c2>,	/* SODIMM 52 */
+			<MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B	0x82>,	/* SODIMM 54 */
+			<MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS		0x82>,	/* SODIMM 66 */
+			<MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00	0x82>,	/* SODIMM 56 */
+			<MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01	0x82>,	/* SODIMM 58 */
+			<MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02	0x82>,	/* SODIMM 60 */
+			<MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82>,	/* SODIMM 62 */
+			<MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16		0x82>;	/* SODIMM 64 */
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x184>;	/* SODIMM 206 */
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x1c4>;	/* SODIMM 208 */
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x184>;	/* SODIMM 210 */
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x184>;	/* SODIMM 212 */
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x184>;	/* SODIMM 216 */
+	};
+
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x184>;	/* SODIMM 218 */
+	};
+
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x184>;	/* SODIMM 220 */
+	};
+
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01		0x184>;	/* SODIMM 222 */
+	};
+
+	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
+	pinctrl_gpio_9_dsi: gpio9dsigrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x1c4>;	/* SODIMM 17 */
+	};
+
+	/* Verdin GPIO_10_DSI */
+	pinctrl_gpio_10_dsi: gpio10dsigrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x1c4>;	/* SODIMM 21 */
+	};
+
+	/* Non-wifi MSP usage only */
+	pinctrl_gpio_hog1: gpiohog1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12		0x1c4>,	/* SODIMM 116 */
+			<MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11		0x1c4>,	/* SODIMM 152 */
+			<MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10		0x1c4>,	/* SODIMM 164 */
+			<MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x1c4>;	/* SODIMM 128 */
+	};
+
+	/* USB_2_OC# */
+	pinctrl_gpio_hog2: gpiohog2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02		0x1c4>;	/* SODIMM 187 */
+	};
+
+	pinctrl_gpio_hog3: gpiohog3grp {
+		fsl,pins =
+			/* CSI_1_MCLK */
+			<MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x1c4>;	/* SODIMM 91 */
+	};
+
+	/* Wifi usage only */
+	pinctrl_gpio_hog4: gpiohog4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x1c4>,	/* SODIMM 151 */
+			<MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29		0x1c4>;	/* SODIMM 153 */
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00		0x1c4>;	/* SODIMM 252 */
+	};
+
+	pinctrl_hdmi_hog: hdmihoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC	0x40000019>,	/* SODIMM 63 */
+			<MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3>,	/* SODIMM 59 */
+			<MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3>,	/* SODIMM 57 */
+			<MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019>;	/* SODIMM 61 */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c6>,	/* PMIC_I2C_SCL */
+			<MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c6>;	/* PMIC_I2C_SDA */
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c6>,	/* PMIC_I2C_SCL */
+			<MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c6>;	/* PMIC_I2C_SDA */
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c6>,	/* SODIMM 55 */
+			<MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001c6>;	/* SODIMM 53 */
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c6>,	/* SODIMM 55 */
+			<MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c6>;	/* SODIMM 53 */
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c6>,	/* SODIMM 95 */
+			<MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c6>;	/* SODIMM 93 */
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c6>,	/* SODIMM 95 */
+			<MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c6>;	/* SODIMM 93 */
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c6>,	/* SODIMM 14 */
+			<MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c6>;	/* SODIMM 12 */
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20		0x400001c6>,	/* SODIMM 14 */
+			<MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
+	};
+
+	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
+	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00		0x184>;	/* SODIMM 42 */
+	};
+
+	/* Verdin I2S_2_D_OUT shared with SAI3 */
+	pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01		0x184>;	/* SODIMM 46 */
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x4>,	/* SODIMM 244 */
+			<MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x1c4>;	/* PMIC_EN_PCIe_CLK, unused */
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x1c4>;	/* PMIC_INT# */
+	};
+
+	pinctrl_pwm_1: pwm1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x6>;	/* SODIMM 15 */
+	};
+
+	pinctrl_pwm_2: pwm2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT		0x6>;	/* SODIMM 16 */
+	};
+
+	/* Verdin PWM_3_DSI shared with GPIO3_IO20 */
+	pinctrl_pwm_3: pwm3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT		0x6>;	/* SODIMM 19 */
+	};
+
+	/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM3_OUT */
+	pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsi1hpdgpiogrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20		0x184>;	/* SODIMM 19 */
+	};
+
+	pinctrl_reg_eth: regethgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_WP__GPIO2_IO20		0x184>;	/* PMIC_EN_ETH */
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK		0x96>,	/* SODIMM 38 */
+			<MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00	0x1d6>,	/* SODIMM 36 */
+			<MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK		0x1d6>,	/* SODIMM 30 */
+			<MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC		0x1d6>,	/* SODIMM 32 */
+			<MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00	0x96>;	/* SODIMM 34 */
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0x1d6>,	/* SODIMM 48 */
+			<MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0x1d6>,	/* SODIMM 42 */
+			<MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0x96>,	/* SODIMM 46 */
+			<MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0x1d6>;	/* SODIMM 44 */
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS		0x1c4>,	/* SODIMM 135 */
+			<MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS		0x1c4>,	/* SODIMM 133 */
+			<MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x1c4>,	/* SODIMM 129 */
+			<MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x1c4>;	/* SODIMM 131 */
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS		0x1c4>,	/* SODIMM 143 */
+			<MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS		0x1c4>,	/* SODIMM 141 */
+			<MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x1c4>,	/* SODIMM 137 */
+			<MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x1c4>; /* SODIMM 139 */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x1c4>,	/* SODIMM 147 */
+			<MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x1c4>;	/* SODIMM 149 */
+	};
+
+	/* Non-wifi usage only */
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x1c4>,	/* SODIMM 151 */
+			<MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x1c4>;	/* SODIMM 153 */
+	};
+
+	pinctrl_usb1_vbus: usb1vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
+	};
+
+	/* USB_1_ID */
+	pinctrl_usb_1_id: usb1idgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x1c4>;	/* SODIMM 161 */
+	};
+
+	/* USB_1_OC# */
+	pinctrl_usb_1_oc_n: usb1ocngrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC		0x1c4>;	/* SODIMM 157 */
+	};
+
+	pinctrl_usb2_vbus: usb2vbusgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
+	};
+
+	/* On-module Wi-Fi */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190>,
+			<MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194>,
+			<MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196>,
+			<MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x0>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x4>;	/* SODIMM 76 */
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x4>,	/* PMIC_USDHC_VSELECT */
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190>,	/* SODIMM 78 */
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0>,	/* SODIMM 74 */
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0>,	/* SODIMM 80 */
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0>,	/* SODIMM 82 */
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0>,	/* SODIMM 70 */
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0>;	/* SODIMM 72 */
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x4>,
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x4>,
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6>;
+	};
+
+	/* Avoid backfeeding with removed card power */
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0x0>,
+			<MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x100>,
+			<MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x100>,
+			<MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x100>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B	0x1d1>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0>,
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B	0x1d1>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4>,
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B	0x1d1>,
+			<MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196>,
+			<MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d2>,
+			<MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d2>,
+			<MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d2>,
+			<MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d2>,
+			<MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d2>,
+			<MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196>,
+			<MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6>;	/* PMIC_WDI */
+	};
+
+	pinctrl_bluetooth_ctrl: bluetoothctrlgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x1c4>;	/* WIFI_WKUP_BT */
+	};
+
+	pinctrl_wifi_ctrl: wifictrlgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x1c4>;	/* WIFI_WKUP_WLAN */
+	};
+
+	pinctrl_wifi_i2s: wifii2sgrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x1d6>,	/* WIFI_TX_SYNC */
+			<MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21		0x96>,	/* WIFI_RX_DATA0 */
+			<MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23		0x1d6>,	/* WIFI_TX_BCLK */
+			<MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24		0x1d6>;	/* WIFI_TX_DATA0 */
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins =
+			<MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x184>;	/* PMIC_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
new file mode 100644
index 000000000..4b50920ac
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -0,0 +1,2091 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &flexspi;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>;
+			clocks = <&clk IMX8MP_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x8a0>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0xa0>, <0x7>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x20>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		soc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+			trips {
+				soc_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mp-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		nvmem-cells = <&imx8mp_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		etm0: etm@28440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28440000 0x1000>;
+			cpu = <&A53_0>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@28540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28540000 0x1000>;
+			cpu = <&A53_1>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@28640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28640000 0x1000>;
+			cpu = <&A53_2>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@28740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28740000 0x1000>;
+			cpu = <&A53_3>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ca_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ca_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out_port>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					ca_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@28c03000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x28c03000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hugo_funnel_in_port1: endpoint {
+					/* M7 input */
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					hugo_funnel_in_port2: endpoint {
+					/* DSP input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@28c04000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c04000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr@28c06000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c06000 0x1000>;
+			clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 5 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 35 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 82 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 114 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mp-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
+				#thermal-sensor-cells = <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			gpt1: timer@302d0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@302e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@302f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mp-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: syscon@30340000 {
+				compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x8 0x8> describes fuses 0x420 and
+				 * 0x430).
+				 */
+				imx8mp_uid: unique-id@8 { /* 0x420-0x430 */
+					reg = <0x8 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				eth_mac1: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+
+				eth_mac2: mac-address@96 { /* 0x658 */
+					reg = <0x96 6>;
+				};
+
+				tmu_calib: calib@264 { /* 0xd90-0xdc0 */
+					reg = <0x264 0x10>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop";
+				reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+
+				snvs_lpgpr: snvs-lpgpr {
+					compatible = "fsl,imx8mp-snvs-lpgpr",
+						     "fsl,imx7d-snvs-lpgpr";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mp-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>,
+						  <&clk IMX8MP_CLK_A53_CORE>,
+						  <&clk IMX8MP_CLK_NOC>,
+						  <&clk IMX8MP_CLK_NOC_IO>,
+						  <&clk IMX8MP_CLK_GIC>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_ARM_PLL_OUT>,
+							 <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_SYS_PLL2_500M>;
+				assigned-clock-rates = <0>, <0>,
+						       <1000000000>,
+						       <800000000>,
+						       <500000000>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mp-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mp-gpc";
+				reg = <0x303a0000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi_phy1: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY1>;
+					};
+
+					pgc_pcie_phy: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
+					};
+
+					pgc_usb1_phy: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
+					};
+
+					pgc_usb2_phy: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
+					};
+
+					pgc_audio: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
+						clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+							 <&clk IMX8MP_CLK_AUDIO_AXI>;
+						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
+						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
+									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <400000000>,
+								       <600000000>;
+					};
+
+					pgc_gpu2d: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_GPU2D>;
+						clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_gpumix: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MP_CLK_GPU_ROOT>,
+							 <&clk IMX8MP_CLK_GPU_AHB>;
+						assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
+								  <&clk IMX8MP_CLK_GPU_AHB>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+									 <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <800000000>, <400000000>;
+					};
+
+					pgc_gpu3d: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
+						clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>,
+							 <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+						power-domains = <&pgc_gpumix>;
+					};
+
+					pgc_mediamix: power-domain@10 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+							 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+					};
+
+					pgc_mipi_phy2: power-domain@16 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
+					};
+
+					pgc_hsiomix: power-domain@17 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+							 <&clk IMX8MP_CLK_HSIO_ROOT>;
+						assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+						assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+						assigned-clock-rates = <500000000>;
+					};
+
+					pgc_ispdwp: power-domain@18 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
+						clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
+					};
+
+					pgc_vpumix: power-domain@19 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+						clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
+					};
+
+					pgc_vpu_g1: power-domain@20 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+						clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+					};
+
+					pgc_vpu_g2: power-domain@21 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+						clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+					};
+
+					pgc_vpu_vc8000e: power-domain@22 {
+						#power-domain-cells = <0>;
+						power-domains = <&pgc_vpumix>;
+						reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+						clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+					};
+
+					pgc_mlmix: power-domain@24 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
+					 <&clk IMX8MP_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
+					 <&clk IMX8MP_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
+					 <&clk IMX8MP_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
+					 <&clk IMX8MP_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+			};
+
+			gpt6: timer@306e0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306e0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@306f0000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x306f0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt4: timer@30700000 {
+				compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt";
+				reg = <0x30700000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>;
+				clock-names = "ipg", "per";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30800000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				ecspi1: spi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi2: spi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ecspi3: spi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+						 <&clk IMX8MP_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+						 <&clk IMX8MP_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+						 <&clk IMX8MP_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				flexcan1: can@308c0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 4>;
+					status = "disabled";
+				};
+
+				flexcan2: can@308d0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308d0000 0x10000>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 5>;
+					status = "disabled";
+				};
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_AHB>,
+					 <&clk IMX8MP_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_UART4_ROOT>,
+					 <&clk IMX8MP_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			mu2: mailbox@30e60000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30e60000 0x10000>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@30ad0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ad0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C5_ROOT>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@30ae0000 {
+				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x30ae0000 0x10000>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_I2C6_ROOT>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_DUMMY>,
+					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			flexspi: spi@30bb0000 {
+				compatible = "nxp,imx8mp-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_QSPI_ROOT>,
+					 <&clk IMX8MP_CLK_QSPI_ROOT>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_QSPI>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MP_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec: ethernet@30be0000 {
+				compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_ENET1_ROOT>,
+					 <&clk IMX8MP_CLK_SIM_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_REF>,
+					 <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_REF>,
+						  <&clk IMX8MP_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>,
+							 <&clk IMX8MP_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&gpr 0x10 3>;
+				status = "disabled";
+			};
+
+			eqos: ethernet@30bf0000 {
+				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x30bf0000 0x10000>;
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_QOS>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_QOS>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
+				intf_mode = <&gpr 0x4>;
+				status = "disabled";
+			};
+		};
+
+		aips5: bus@30c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			spba-bus@30c00000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30c00000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				sai1: sai@30c10000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c10000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai2: sai@30c20000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c20000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai3: sai@30c30000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c30000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai5: sai@30c50000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c50000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai6: sai@30c60000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c60000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sai7: sai@30c80000 {
+					compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai";
+					reg = <0x30c80000 0x10000>;
+					#sound-dai-cells = <0>;
+					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>,
+						 <&clk IMX8MP_CLK_DUMMY>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>,
+						 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>;
+					clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>;
+					dma-names = "rx", "tx";
+					interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+			};
+
+			sdma3: dma-controller@30e00000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e00000 0x10000>;
+				#dma-cells = <3>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma2: dma-controller@30e10000 {
+				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
+				reg = <0x30e10000 0x10000>;
+				#dma-cells = <3>;
+				clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>,
+					 <&clk IMX8MP_CLK_AUDIO_ROOT>;
+				clock-names = "ipg", "ahb";
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			audio_blk_ctrl: clock-controller@30e20000 {
+				compatible = "fsl,imx8mp-audio-blk-ctrl";
+				reg = <0x30e20000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+					 <&clk IMX8MP_CLK_SAI1>,
+					 <&clk IMX8MP_CLK_SAI2>,
+					 <&clk IMX8MP_CLK_SAI3>,
+					 <&clk IMX8MP_CLK_SAI5>,
+					 <&clk IMX8MP_CLK_SAI6>,
+					 <&clk IMX8MP_CLK_SAI7>;
+				clock-names = "ahb",
+					      "sai1", "sai2", "sai3",
+					      "sai5", "sai6", "sai7";
+				power-domains = <&pgc_audio>;
+			};
+		};
+
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MP_CLK_NOC>;
+			#interconnect-cells = <1>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-1000000000 {
+					opp-hz = /bits/ 64 <1000000000>;
+				};
+			};
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			isi_0: isi@32e00000 {
+				compatible = "fsl,imx8mp-isi";
+				reg = <0x32e00000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+				clock-names = "axi", "apb";
+				fsl,blk-ctrl = <&media_blk_ctrl>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						isi_in_0: endpoint {
+							remote-endpoint = <&mipi_csi_0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						isi_in_1: endpoint {
+							remote-endpoint = <&mipi_csi_1_out>;
+						};
+					};
+				};
+			};
+
+			dewarp: dwe@32e30000 {
+				compatible = "nxp,imx8mp-dw100";
+				reg = <0x32e30000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+				clock-names = "axi", "ahb";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+			};
+
+			mipi_csi_0: csi@32e40000 {
+				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e40000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clock-rates = <500000000>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_0_out: endpoint {
+							remote-endpoint = <&isi_in_0>;
+						};
+					};
+				};
+			};
+
+			mipi_csi_1: csi@32e50000 {
+				compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2";
+				reg = <0x32e50000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <266000000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pclk", "wrap", "phy", "axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+				assigned-clock-rates = <266000000>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_1_out: endpoint {
+							remote-endpoint = <&isi_in_1>;
+						};
+					};
+				};
+			};
+
+			mipi_dsi: dsi@32e60000 {
+				compatible = "fsl,imx8mp-mipi-dsim";
+				reg = <0x32e60000 0x400>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				clock-names = "bus_clk", "sclk_mipi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_CLK_24M>;
+				assigned-clock-rates = <200000000>, <24000000>;
+				samsung,pll-clock-frequency = <24000000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dsim_from_lcdif1: endpoint {
+							remote-endpoint = <&lcdif1_to_dsim>;
+						};
+					};
+				};
+			};
+
+			lcdif1: display-controller@32e80000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e80000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>;
+				status = "disabled";
+
+				port {
+					lcdif1_to_dsim: endpoint {
+						remote-endpoint = <&dsim_from_lcdif1>;
+					};
+				};
+			};
+
+			lcdif2: display-controller@32e90000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e90000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
+				status = "disabled";
+
+				port {
+					lcdif2_to_ldb: endpoint {
+						remote-endpoint = <&ldb_from_lcdif2>;
+					};
+				};
+			};
+
+			media_blk_ctrl: blk-ctrl@32ec0000 {
+				compatible = "fsl,imx8mp-media-blk-ctrl",
+					     "syscon";
+				reg = <0x32ec0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				power-domains = <&pgc_mediamix>,
+						<&pgc_mipi_phy1>,
+						<&pgc_mipi_phy1>,
+						<&pgc_mediamix>,
+						<&pgc_mediamix>,
+						<&pgc_mipi_phy2>,
+						<&pgc_mediamix>,
+						<&pgc_ispdwp>,
+						<&pgc_ispdwp>,
+						<&pgc_mipi_phy2>;
+				power-domain-names = "bus", "mipi-dsi1", "mipi-csi1",
+						     "lcdif1", "isi", "mipi-csi2",
+						     "lcdif2", "isp", "dwe",
+						     "mipi-dsi2";
+				interconnects =
+					<&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>,
+					<&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>;
+				interconnect-names = "lcdif-rd", "lcdif-wr", "isi0",
+						     "isi1", "isi2", "isp0", "isp1",
+						     "dwe";
+				clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+				clock-names = "apb", "axi", "cam1", "cam2",
+					      "disp1", "disp2", "isp", "phy";
+
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
+						  <&clk IMX8MP_CLK_MEDIA_APB>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
+						  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+						  <&clk IMX8MP_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+							 <&clk IMX8MP_SYS_PLL1_800M>,
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MP_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <500000000>, <200000000>,
+						       <0>, <0>, <1039500000>;
+				#power-domain-cells = <1>;
+
+				lvds_bridge: bridge@5c {
+					compatible = "fsl,imx8mp-ldb";
+					reg = <0x5c 0x4>, <0x128 0x4>;
+					reg-names = "ldb", "lvds";
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clock-names = "ldb";
+					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif2: endpoint {
+								remote-endpoint = <&lcdif2_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							ldb_lvds_ch1: endpoint {
+							};
+						};
+					};
+				};
+			};
+
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mp-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				resets = <&src IMX8MP_RESET_PCIEPHY>,
+					 <&src IMX8MP_RESET_PCIEPHY_PERST>;
+				reset-names = "pciephy", "perst";
+				power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			hsio_blk_ctrl: blk-ctrl@32f10000 {
+				compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+				reg = <0x32f10000 0x24>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_PCIE_ROOT>;
+				clock-names = "usb", "pcie";
+				power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+						<&pgc_usb1_phy>, <&pgc_usb2_phy>,
+						<&pgc_hsiomix>, <&pgc_pcie_phy>;
+				power-domain-names = "bus", "usb", "usb-phy1",
+						     "usb-phy2", "pcie", "pcie-phy";
+				interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
+						<&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
+				interconnect-names = "noc-pcie", "usb1", "usb2", "pcie";
+				#power-domain-cells = <1>;
+				#clock-cells = <0>;
+			};
+		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx8mp-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <3>;
+			linux,pci-domain = <0>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
+		pcie_ep: pcie-ep@33800000 {
+			compatible = "fsl,imx8mp-pcie-ep";
+			reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+			reg-names = "dbi", "addr_space";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+			interrupt-names = "dma";
+			fsl,max-link-speed = <3>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+			resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
+		gpu3d: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>,
+				 <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>,
+				 <&clk IMX8MP_CLK_GPU_ROOT>,
+				 <&clk IMX8MP_CLK_GPU_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
+					  <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+						 <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>, <800000000>;
+			power-domains = <&pgc_gpu3d>;
+		};
+
+		gpu2d: gpu@38008000 {
+			compatible = "vivante,gc";
+			reg = <0x38008000 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>,
+				 <&clk IMX8MP_CLK_GPU_ROOT>,
+				 <&clk IMX8MP_CLK_GPU_AHB>;
+			clock-names = "core", "bus", "reg";
+			assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+			assigned-clock-rates = <800000000>;
+			power-domains = <&pgc_gpu2d>;
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <500000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
+		};
+
+		vpumix_blk_ctrl: blk-ctrl@38330000 {
+			compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
+			reg = <0x38330000 0x100>;
+			#power-domain-cells = <1>;
+			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+					<&pgc_vpu_g2>, <&pgc_vpu_vc8000e>;
+			power-domain-names = "bus", "g1", "g2", "vc8000e";
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+			clock-names = "g1", "g2", "vc8000e";
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>, <600000000>;
+			interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
+					<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
+			interconnect-names = "g1", "g2", "vc8000e";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,
+			      <0x38880000 0xc0000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		edacmc: memory-controller@3d400000 {
+			compatible = "snps,ddrc-3.80a";
+			reg = <0x3d400000 0x400000>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mp-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb3_0: usb@32f10100 {
+			compatible = "fsl,imx8mp-dwc3";
+			reg = <0x32f10100 0x8>,
+			      <0x381f0000 0x20>;
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_USB_SUSP>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+			ranges;
+			status = "disabled";
+
+			usb_dwc3_0: usb@38100000 {
+				compatible = "snps,dwc3";
+				reg = <0x38100000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_USB_CORE_REF>,
+					 <&clk IMX8MP_CLK_USB_SUSP>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy0>, <&usb3_phy0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+			};
+
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mp-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb3_1: usb@32f10108 {
+			compatible = "fsl,imx8mp-dwc3";
+			reg = <0x32f10108 0x8>,
+			      <0x382f0000 0x20>;
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_USB_SUSP>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+			ranges;
+			status = "disabled";
+
+			usb_dwc3_1: usb@38200000 {
+				compatible = "snps,dwc3";
+				reg = <0x38200000 0x10000>;
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+					 <&clk IMX8MP_CLK_USB_CORE_REF>,
+					 <&clk IMX8MP_CLK_USB_SUSP>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+			};
+		};
+
+		dsp: dsp@3b6e8000 {
+			compatible = "fsl,imx8mp-dsp";
+			reg = <0x3b6e8000 0x88000>;
+			mbox-names = "txdb0", "txdb1",
+				"rxdb0", "rxdb1";
+			mboxes = <&mu2 2 0>, <&mu2 2 1>,
+				<&mu2 3 0>, <&mu2 3 1>;
+			memory-region = <&dsp_reserved>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
new file mode 100644
index 000000000..7507548cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -0,0 +1,711 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "NXP i.MX8MQ EVK";
+	compatible = "fsl,imx8mq-evk", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0xc0000000>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pcie1: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie1_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	buck2_reg: regulator-buck2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buck2>;
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		states = <1000000 0x0
+			  900000 0x1>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+		linux,autosuspend-period = <125>;
+	};
+
+	audio_codec_bt_sco: audio-codec-bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <1>;
+	};
+
+	wm8524: audio-codec {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8524";
+		wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-bt-sco {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "bt-sco-audio";
+		simple-audio-card,format = "dsp_a";
+		simple-audio-card,bitclock-inversion;
+		simple-audio-card,frame-master = <&btcpu>;
+		simple-audio-card,bitclock-master = <&btcpu>;
+
+		btcpu: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+			dai-tdm-slot-num = <2>;
+			dai-tdm-slot-width = <16>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&audio_codec_bt_sco 1>;
+		};
+	};
+
+	sound-wm8524 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm8524-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,widgets =
+			"Line", "Left Line Out Jack",
+			"Line", "Right Line Out Jack";
+		simple-audio-card,routing =
+			"Left Line Out Jack", "LINEVOUTL",
+			"Right Line Out Jack", "LINEVOUTR";
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		link_codec: simple-audio-card,codec {
+			sound-dai = <&wm8524>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif1>;
+		spdif-out;
+		spdif-in;
+	};
+
+	sound-hdmi-arc {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-hdmi-arc";
+		spdif-controller = <&spdif2>;
+		spdif-in;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+	status = "okay";
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		/*
+		 * On imx8mq B0 PLL can't be bypassed so low bus is 166M
+		 */
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			qca,disable-smarteee;
+			vddio-supply = <&vddh>;
+
+			vddh: vddh-regulator {
+			};
+		};
+	};
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wifi_reset>;
+
+	wl-reg-on-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		pinctrl-0 = <&pinctrl_mipi_dsi>;
+		pinctrl-names = "default";
+		compatible = "raydium,rm67191";
+		reg = <0>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+		dsi-lanes = <4>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	vpcie-supply = <&reg_pcie1>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	n25q256a: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&spdif2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_buck2: vddarmgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x4f
+		>;
+	};
+
+	pinctrl_mipi_dsi: mipidsigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6		0x16
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28		0x16
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12		0x16
+		>;
+	};
+
+	pinctrl_pcie1_reg: pcie1reggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x16
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK        0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0    0xd6
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8       0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
+			MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdog1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reset: wifiresetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29		0x16
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
new file mode 100644
index 000000000..366693f31
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MQ HummingBoard Pulse";
+	compatible = "solidrun,hummingboard-pulse", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v_5v0";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	typec_ptn5100: usb-typec@50 {
+		compatible = "nxp,ptn5110";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 2000,
+						 PDO_FIXED_USB_COMM |
+						 PDO_FIXED_SUSPEND |
+						 PDO_FIXED_EXTPOWER)>;
+			sink-pdos = <PDO_FIXED(5000, 2000,
+					       PDO_FIXED_USB_COMM |
+					       PDO_FIXED_SUSPEND |
+					       PDO_FIXED_EXTPOWER)
+				     PDO_FIXED(9000, 2000,
+					       PDO_FIXED_USB_COMM |
+					       PDO_FIXED_SUSPEND |
+					       PDO_FIXED_EXTPOWER)>;
+			op-sink-microwatt = <9000000>;
+
+			port {
+				typec1_dr_sw: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+		status = "okay";
+	};
+
+	rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+};
+
+&uart2 { /* J35 header */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+&uart3 { /* Mikrobus */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* MikroBus Analog */
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x41
+			/* MikroBus Reset */
+			MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23		0x41
+			/*
+			 * The following 2 pins need to be commented out and
+			 * reconfigured to enable RTS/CTS on UART3
+			 */
+			/* MikroBus PWM */
+			MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8		0x41
+			/* MikroBus INT */
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x41
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x4000007f
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15	0x16
+			MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x17059
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			/*
+			 * These pins are by default GPIO on the Mikro Bus
+			 * Header. To use RTS/CTS on UART3 comment them out
+			 * of the hoggrp and enable them here
+			 */
+			/* MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x49 */
+			/* MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x49 */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+		>;
+	};
+
+	pinctrl_usdhc2_vmmc: usdhc2vmmcgpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
new file mode 100644
index 000000000..6376417e9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -0,0 +1,611 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for the Kontron pitx-imx8m board.
+ *
+ * Copyright (C) 2021 Heiko Thiery <heiko.thiery@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "Kontron pITX-imx8m";
+	compatible = "kontron,pitx-imx8m", "fsl,imx8mq";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &qspi0;
+		spi1 = &ecspi2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	pcie0_refclk: pcie0-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: pcie1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <20000>;
+		enable-active-high;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670";
+		reg = <0>;
+		spi-max-frequency = <43000000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <280>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pfuze-support-disable-sw;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-name = "V_0V9_GPU";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-name = "V_0V9_VPU";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "V_1V1_NVCC_DRAM";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-name = "V_1V0_DRAM";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "V_1V8_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-name = "NC";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-name = "V_0V9_SNVS";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-name = "V_0V55_VREF_DDR";
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-name = "V_1V5_CSI";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "V_0V9_PHY";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "V_1V8_PHY";
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "V_1V8_VDDA";
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "V_3V3_PHY";
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "V_2V8_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	fan-controller@1b {
+		compatible = "maxim,max6650";
+		reg = <0x1b>;
+		maxim,fan-microvolt = <5000000>;
+	};
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* M.2 B-key slot */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "okay";
+};
+
+/* Intel Ethernet Controller I210/I211 */
+&pcie1 {
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie1_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	fsl,max-link-speed = <1>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19 /* TPM Reset */
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19 /* USB2 Hub Reset */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19 /* GPIO0 */
+			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15		0x19 /* GPIO1 */
+			MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* GPIO2 */
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* GPIO3 */
+			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19 /* GPIO4 */
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* GPIO5 */
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* GPIO6 */
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x19 /* GPIO7 */
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x16 /* PCIE_PERST */
+			MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29		0x16 /* W_DISABLE */
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x16
+			MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x16
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x19
+			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x19
+			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x19
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x19
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x49
+			MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20			0x19
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usb0: usb0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x19
+			MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x19
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
new file mode 100644
index 000000000..8055a2c23
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -0,0 +1,1044 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Purism Librem 5 devkit";
+	compatible = "purism,librem5-devkit", "fsl,imx8mq";
+
+	backlight_dsi: backlight-dsi {
+		compatible = "pwm-backlight";
+		/* 200 Hz for the PAM2841 */
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		/* Default brightness level (index into the array defined by */
+		/* the "brightness-levels" property) */
+		default-brightness-level = <0>;
+		power-supply = <&reg_22v4_p>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-1 {
+			label = "VOL_UP";
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-2 {
+			label = "VOL_DOWN";
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-3 {
+			label = "WWAN_WAKE";
+			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+			wakeup-source;
+			linux,code = <KEY_PHONE>;
+		};
+	};
+
+	leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
+		};
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_1v8_p: regulator-1v8-p {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8_p";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_pwr_en>;
+	};
+
+	reg_2v8_p: regulator-2v8-p {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8_p";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_pwr_en>;
+	};
+
+	reg_3v3_p: regulator-3v3-p {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_p";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_pwr_en>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	reg_5v_p: regulator-5v-p {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_p";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_pwr_en>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	reg_22v4_p: regulator-22v4-p  {
+		compatible = "regulator-fixed";
+		regulator-name = "22v4_P";
+		regulator-min-microvolt = <22400000>;
+		regulator-max-microvolt = <22400000>;
+		vin-supply = <&reg_pwr_en>;
+	};
+
+	reg_pwr_en: regulator-pwr-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwr_en>;
+		regulator-name = "PWR_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	wwan_codec: sound-wwan-codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	mic_mux: mic-mux {
+		compatible = "simple-audio-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_micsel>;
+		mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+		sound-name-prefix = "Mic Mux";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpdet>;
+		simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>;
+		simple-audio-card,name = "Librem 5 Devkit";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Builtin Microphone",
+			"Microphone", "Headset Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Builtin Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Mux OUT",
+			"Mic Mux IN1", "Headset Microphone",
+			"Mic Mux IN2", "Builtin Microphone",
+			"Mic Mux OUT", "Mic Bias",
+			"Headphones", "HP_OUT",
+			"Builtin Speaker", "Speaker Amp OUTR",
+			"Speaker Amp INR", "LINE_OUT";
+		simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SIMCom SIM7100";
+		simple-audio-card,format = "dsp_a";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+		};
+
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&wwan_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	speaker_amp: speaker-amp {
+		compatible = "simple-audio-amplifier";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spkamp>;
+		VCC-supply = <&reg_3v3_p>;
+		sound-name-prefix = "Speaker Amp";
+		enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_haptic>;
+	        enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3v3_p>;
+	};
+
+	wifi_pwr_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-name = "WIFI_EN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	wifi_pwr_seq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_rst>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	phy-supply = <&reg_3v3_p>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		#clock-cells = <0>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	typec_ptn5100: usb-typec@52 {
+		compatible = "nxp,ptn5110";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 2000,
+				PDO_FIXED_USB_COMM |
+				PDO_FIXED_DUAL_ROLE |
+				PDO_FIXED_DATA_SWAP )>;
+			sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM |
+				PDO_FIXED_DUAL_ROLE |
+				PDO_FIXED_DATA_SWAP )
+			     PDO_VAR(5000, 5000, 3500)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_con_hs: endpoint {
+						remote-endpoint = <&typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_con_ss: endpoint {
+						remote-endpoint = <&typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	charger@6b { /* bq25896 */
+		compatible = "ti,bq25890";
+		reg = <0x6b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		ti,battery-regulation-voltage = <4192000>; /* 4.192V */
+		ti,charge-current = <1600000>; /* 1.6A */
+		ti,termination-current = <66000>;  /* 66mA */
+		ti,precharge-current = <130000>; /* 130mA */
+		ti,minimum-sys-voltage = <3000000>; /* 3V */
+		ti,boost-voltage = <5000000>; /* 5V */
+		ti,boost-max-current = <50000>; /* 50mA */
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	magnetometer@1e	{
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+	};
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		VDDD-supply = <&reg_1v8_p>;
+		VDDIO-supply = <&reg_3v3_p>;
+		VDDA-supply = <&reg_3v3_p>;
+	};
+
+	touchscreen@5d {
+		compatible = "goodix,gt5688";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+		AVDD28-supply = <&reg_2v8_p>;
+		VDDIO-supply = <&reg_1v8_p>;
+	};
+
+	proximity-sensor@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-0 = <&pinctrl_prox>;
+	};
+
+	accel-gyro@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_3v3_p>;
+		vddio-supply = <&reg_3v3_p>;
+		mount-matrix = "1",  "0",  "0",
+			       "0",  "1",  "0",
+			       "0",  "0", "-1";
+	};
+};
+
+&iomuxc {
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT	0x6 /* DSI_BL_PWM */
+		>;
+	};
+
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11	0x16 /* nBT_DISABLE */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7	0x10 /* BT_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_charger: chargergrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x80 /* CHRG_nINT */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0		0x16  /* TOUCH INT */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x19  /* TOUCH RST */
+		>;
+	};
+
+	pinctrl_pwm_led: pwmledgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeygrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
+			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22	0x16
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80   /* nWoWWAN */
+		>;
+	};
+
+	pinctrl_haptic: hapticgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0xc6   /* nHAPTIC */
+		>;
+	};
+
+	pinctrl_hpdet: hpdetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0xC0   /* HP_DET */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000001f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x4000001f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x4000001f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x4000001f
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19	0x8  /* IMU_INT */
+		>;
+	};
+
+	pinctrl_micsel: micselgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0xc6  /* MIC_SEL */
+		>;
+	};
+
+	pinctrl_spkamp: spkampgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3		0x81  /* MUTE */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x80  /* PMIC intr */
+		>;
+	};
+
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x80  /* prox intr */
+		>;
+	};
+
+	pinctrl_pwr_en: pwrengrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x06
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x80  /* RTC intr */
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK     0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x16
+			MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x80
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
+			MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_rst: usdhc2rstgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20		0x80 /* WIFI_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcd
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcf
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5         0x06
+		>;
+	};
+
+	pinctrl_wwan: wwangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4	0x09 /* nWWAN_DISABLE */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8	0x80 /* nWoWWAN */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x19 /* WWAN_RESET */
+		>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel@0 {
+		compatible = "rocktech,jh057n00900";
+		reg = <0>;
+		backlight = <&backlight_dsi>;
+		reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		iovcc-supply = <&reg_1v8_p>;
+		vcc-supply = <&reg_2v8_p>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&buck3_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 { /* GNSS */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_5v_p>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_5v_p>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "otg";
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		typec_ss: endpoint {
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&wifi_pwr_en>;
+	mmc-pwrseq = <&wifi_pwr_seq>;
+	broken-cd;
+	disable-wp;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
new file mode 100644
index 000000000..cf4002511
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+//
+// Librem 5 Chestnut
+
+/dts-v1/;
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r2";
+	compatible = "purism,librem5r2", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+	mount-matrix = "1",  "0",  "0",
+		       "0", "-1",  "0",
+		       "0",  "0",  "1";
+};
+
+&bq25895 {
+	ti,charge-current = <1600000>; /* uA */
+};
+
+&proximity {
+	proximity-near-level = <50>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
new file mode 100644
index 000000000..077c5cd25
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5-r3.dtsi"
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <950000>;
+	};
+};
+
+&buck3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
new file mode 100644
index 000000000..17f86496f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+/*
+ * This file describes hardware that is shared among r3 ("Dogwood") and
+ * later revisions of the Librem 5 so it has to be included in dts there.
+ */
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+	model = "Purism Librem 5r3";
+	compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+	mount-matrix = "1",  "0",  "0",
+		       "0",  "1",  "0",
+		       "0",  "0", "-1";
+};
+
+&bq25895 {
+	ti,charge-current = <1500000>; /* uA */
+};
+
+&camera_front {
+	pinctrl-0 = <&pinctrl_csi1>, <&pinctrl_r3_camera_pwr>;
+	shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+	pinctrl_r3_camera_pwr: r3camerapwrgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4		0x83
+		>;
+	};
+};
+
+&magnetometer {
+	mount-matrix = "1",  "0",  "0",
+		       "0", "-1",  "0",
+		       "0",  "0", "-1";
+};
+
+&proximity {
+	proximity-near-level = <10>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
new file mode 100644
index 000000000..33f398b48
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+#include "imx8mq-librem5-r3.dtsi"
+
+/ {
+	model = "Purism Librem 5r4";
+	compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
+};
+
+&bat {
+	maxim,rsns-microohm = <1667>;
+};
+
+&led_backlight {
+	led-max-microamp = <25000>;
+};
+
+&lcd_panel {
+	compatible = "ys,ys57pss36bh5gq";
+};
+
+&proximity {
+	proximity-near-level = <7>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
new file mode 100644
index 000000000..138a4d36a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -0,0 +1,1422 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Purism Librem 5";
+	compatible = "purism,librem5", "fsl,imx8mq";
+	chassis-type = "handset";
+
+	backlight_dsi: backlight-dsi {
+		compatible = "led-backlight";
+		leds = <&led_backlight>;
+		brightness-levels = <255>;
+		default-brightness-level = <190>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keys>;
+
+		key-vol-down {
+			label = "VOL_DOWN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <50>;
+			wakeup-source;
+		};
+
+		key-vol-up {
+			label = "VOL_UP";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <50>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <248>;
+
+			led-0 {
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm2 0 50000 0>;
+			};
+
+			led-1 {
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm4 0 50000 0>;
+			};
+
+			led-2 {
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm3 0 50000 0>;
+			};
+		};
+	};
+
+	reg_aud_1v8: regulator-audio-1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audiopwr>;
+		regulator-name = "AUD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mic_2v4: regulator-mic-2v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "MIC_2V4";
+		regulator-min-microvolt = <2400000>;
+		regulator-max-microvolt = <2400000>;
+		vin-supply = <&reg_aud_1v8>;
+	};
+
+	/*
+	 * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
+	 * since we can't have it twice in the 2 different regulator nodes.
+	 */
+	reg_csi_1v8: regulator-csi-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDIO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vdd_3v3>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* controlled by the CAMERA_POWER_KEY HKS */
+	reg_vcam_1v2: regulator-vcam-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_vdd_1v8>;
+		enable-active-high;
+	};
+
+	reg_vcam_2v8: regulator-vcam-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAMERA_VDDA_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_vdd_3v3>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_gnss: regulator-gnss {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gnsspwr>;
+		regulator-name = "GNSS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_hub: regulator-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hub_pwr>;
+		regulator-name = "HUB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_1v8: regulator-lcd-1v8 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsien>;
+		regulator-name = "LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_vdd_1v8>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* Otherwise i2c3 is not functional */
+		regulator-always-on;
+	};
+
+	reg_lcd_3v4: regulator-lcd-3v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsibiasen>;
+		vin-supply = <&reg_vsys_3v4>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vdd_sen: regulator-vdd-sen {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SEN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&buck7_reg>;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vsys_3v4: regulator-vsys-3v4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSYS_3V4";
+		regulator-min-microvolt = <3400000>;
+		regulator-max-microvolt = <3400000>;
+		regulator-always-on;
+	};
+
+	reg_wifi_3v3: regulator-wifi-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr>;
+		regulator-name = "3V3_WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_vdd_3v3>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
+		simple-audio-card,name = "Librem 5";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Microphone", "Headset Mic",
+			"Microphone", "Digital Mic",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOUTL",
+			"Headphones", "HPOUTR",
+			"Speaker", "SPKOUTL",
+			"Speaker", "SPKOUTR",
+			"Headset Mic", "MICBIAS",
+			"IN3R", "Headset Mic",
+			"DMICDAT", "Digital Mic";
+		simple-audio-card,hp-det-gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	sound-wwan {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Modem";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai6>;
+			frame-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&bm818_codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+
+	usdhc2_pwrseq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt>, <&pinctrl_wifi_disable>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>,
+			      <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	};
+
+	bm818_codec: sound-wwan-codec {
+		compatible = "broadmobi,bm818", "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm1 0 1000000000 0>;
+		pwm-names = "enable";
+		vcc-supply = <&reg_vdd_3v3>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&csi1 {
+	status = "okay";
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+	status = "okay";
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25000000 {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-166000000 {
+			opp-hz = /bits/ 64 <166935483>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "protected0";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "firmware";
+			reg = <0x30000 0x1d0000>;
+			read-only;
+		};
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic_5v>;
+
+	pmic-5v-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		input;
+		lane-mapping = "pmic-5v";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CLKO2 for cameras on both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2      0x1f
+		>;
+	};
+
+	pinctrl_audiopwr: audiopwrgrp {
+		fsl,pins = <
+			/* AUDIO_POWER_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4	0x83
+		>;
+	};
+
+	pinctrl_bl: blgrp {
+		fsl,pins = <
+			/* BACKLINGE_EN */
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14	0x83
+		>;
+	};
+
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			/* BT_REG_ON */
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25	0x83
+		>;
+	};
+
+	pinctrl_camera_pwr: camerapwrgrp {
+		fsl,pins = <
+			/* CAMERA_PWR_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x83
+		>;
+	};
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			/* CSI1_NRST */
+			MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25	0x83
+		>;
+	};
+
+	pinctrl_charger_in: chargeringrp {
+		fsl,pins = <
+			/* CHRG_INT */
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3	0x80
+		>;
+	};
+
+	pinctrl_dsibiasen: dsibiasengrp {
+		fsl,pins = <
+			/* DSI_BIAS_EN */
+			MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20	0x83
+		>;
+	};
+
+	pinctrl_dsien: dsiengrp {
+		fsl,pins = <
+			/* DSI_EN_3V3 */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x83
+		>;
+	};
+
+	pinctrl_dsirst: dsirstgrp {
+		fsl,pins = <
+			/* DSI_RST */
+			MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29	0x83
+			/* DSI_TE */
+			MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28	0x83
+			/* TP_RST */
+			MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24	0x83
+		>;
+	};
+
+	pinctrl_ecspi1: ecspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x83
+			MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x83
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x19
+			MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x83
+		>;
+	};
+
+	pinctrl_gauge: gaugegrp {
+		fsl,pins = <
+			/* BAT_LOW */
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20	0x80
+		>;
+	};
+
+	pinctrl_gnsspwr: gnsspwrgrp {
+		fsl,pins = <
+			/* GPS3V3_EN */
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12	0x83
+		>;
+	};
+
+	pinctrl_haptic: hapticgrp {
+		fsl,pins = <
+			/* MOTO */
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT	0x83
+		>;
+	};
+
+	pinctrl_hp: hpgrp {
+		fsl,pins = <
+			/* HEADPHONE_DET_1V8 */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9	0x180
+		>;
+	};
+
+	pinctrl_hub_pwr: hubpwrgrp {
+		fsl,pins = <
+			/* HUB_PWR_3V3_EN */
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x83
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL		0x40000026
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA		0x40000026
+		>;
+	};
+
+	pinctrl_keys: keysgrp {
+		fsl,pins = <
+			/* VOL- */
+			MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17	0x01C0
+			/* VOL+ */
+			MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16	0x01C0
+		>;
+	};
+
+	pinctrl_led_b: ledbgrp {
+		fsl,pins = <
+			/* LED_B */
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x06
+		>;
+	};
+
+	pinctrl_led_g: ledggrp {
+		fsl,pins = <
+			/* LED_G */
+			MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT		0x06
+		>;
+	};
+
+	pinctrl_led_r: ledrgrp {
+		fsl,pins = <
+			/* LED_R */
+			MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT		0x06
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			/* INT_MAG */
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22	0x80
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC_NINT */
+			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x80
+		>;
+	};
+
+	pinctrl_pmic_5v: pmic5vgrp {
+		fsl,pins = <
+			/* PMIC_5V */
+			MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x80
+		>;
+	};
+
+	pinctrl_prox: proxgrp {
+		fsl,pins = <
+			/* INT_LIGHT */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7	0x80
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x80
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK	0xd6
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK	0xd6
+		>;
+	};
+
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0	0xd6
+			MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK	0xd6
+			MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0	0xd6
+		>;
+	};
+
+	pinctrl_tcpc: tcpcgrp {
+		fsl,pins = <
+			/* TCPC_INT */
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x01C0
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* TP_INT */
+			MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27	0x80
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			/* TYPEC_MUX_EN */
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x83
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX	0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX	0x49
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX	0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX	0x49
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX	0x49
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B	0x49
+			MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xc3
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x8d
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcd
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcd
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcd
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcd
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcd
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x80
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xcf
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0	0xcf
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1	0xcf
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2	0xcf
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3	0xcf
+			MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0xc1
+		>;
+	};
+
+	pinctrl_wifi_disable: wifidisablegrp {
+		fsl,pins = <
+			/* WIFI_REG_ON */
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29	0x83
+		>;
+	};
+
+	pinctrl_wifi_pwr: wifipwrgrp {
+		fsl,pins = <
+			/* WIFI3V3_EN */
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10	0x83
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			/* nWDOG */
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x1f
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	typec_pd: usb-pd@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>, <&pinctrl_tcpc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+		extcon = <&usb3_phy0>;
+		wakeup-source;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_con_hs: endpoint {
+						remote-endpoint = <&typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_con_ss: endpoint {
+						remote-endpoint = <&typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
+		clocks = <&pmic_osc>;
+		#clock-cells = <0>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <880000>;
+				rohm,dvs-idle-voltage = <820000>;
+				rohm,dvs-suspend-voltage = <810000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <950000>;
+				rohm,dvs-idle-voltage = <850000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <850000>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				rohm,dvs-run-voltage = <930000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				/* leave on for snvs power button */
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDD_PHY_0V9 - MIPI and HDMI domains */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_PHY_0V9 - MIPI, HDMI and USB domains */
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/* VDD_PHY_3V3 - USB domain */
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magnetometer: magnetometer@1e	{
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		vdd-supply = <&reg_vdd_sen>;
+		vddio-supply = <&reg_vdd_1v8>;
+	};
+
+	regulator@3e {
+		compatible = "tps65132";
+		reg = <0x3e>;
+
+		reg_lcd_avdd: outp {
+			regulator-name = "LCD_AVDD";
+			vin-supply = <&reg_lcd_3v4>;
+		};
+
+		reg_lcd_avee: outn {
+			regulator-name = "LCD_AVEE";
+			vin-supply = <&reg_lcd_3v4>;
+		};
+	};
+
+	proximity: prox@60 {
+		compatible = "vishay,vcnl4040";
+		reg = <0x60>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_prox>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	accel_gyro: accel-gyro@6a	{
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		vdd-supply = <&reg_vdd_sen>;
+		vddio-supply = <&reg_vdd_1v8>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+		assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+		assigned-clock-rates = <24576000>;
+		#sound-dai-cells = <0>;
+		mic-cfg = <0x200>;
+		DCVDD-supply = <&reg_aud_1v8>;
+		DBVDD-supply = <&reg_aud_1v8>;
+		AVDD-supply = <&reg_aud_1v8>;
+		CPVDD-supply = <&reg_aud_1v8>;
+		MICVDD-supply = <&reg_mic_2v4>;
+		PLLVDD-supply = <&reg_aud_1v8>;
+		SPKVDD1-supply = <&reg_vsys_3v4>;
+		SPKVDD2-supply = <&reg_vsys_3v4>;
+		gpio-cfg = <
+			0x0000 /* n/c */
+			0x0001 /* gpio2, 1: default */
+			0x0013 /* gpio3, 2: dmicclk */
+			0x0000 /* n/c, 3: default */
+			0x8014 /* gpio5, 4: dmic_dat */
+			0x0000 /* gpio6, 5: default */
+		>;
+	};
+
+	camera_front: camera@20 {
+		compatible = "hynix,hi846";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_csi1>;
+		clocks = <&clk IMX8MQ_CLK_CLKO2>;
+		assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
+		assigned-clock-rates = <25000000>;
+		reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		vdda-supply = <&reg_vcam_2v8>;
+		vddd-supply = <&reg_vcam_1v2>;
+		vddio-supply = <&reg_csi_1v8>;
+		rotation = <90>;
+		orientation = <0>;
+
+		port {
+			camera1_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64
+					<80000000 200000000 300000000>;
+				remote-endpoint = <&mipi1_sensor_ep>;
+			};
+		};
+	};
+
+	backlight@36 {
+		compatible = "ti,lm36922";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bl>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		vled-supply = <&reg_vsys_3v4>;
+		ti,ovp-microvolt = <25000000>;
+
+		led_backlight: led@0 {
+			reg = <0>;
+			label = ":backlight";
+			linux,default-trigger = "backlight";
+			led-max-microamp = <20000>;
+		};
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+		vcc-supply = <&reg_lcd_1v8>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <384000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	vcm@c {
+		compatible = "dongwoon,dw9714";
+		reg = <0x0c>;
+		vcc-supply = <&reg_csi_1v8>;
+	};
+
+	bat: fuel-gauge@36 {
+		compatible = "maxim,max17055";
+		reg = <0x36>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gauge>;
+		power-supplies = <&bq25895>;
+		maxim,over-heat-temp = <700>;
+		maxim,over-volt = <4500>;
+		maxim,rsns-microohm = <5000>;
+	};
+
+	bq25895: charger@6a {
+		compatible = "ti,bq25895", "ti,bq25890";
+		reg = <0x6a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger_in>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		phys = <&usb3_phy0>;
+		ti,battery-regulation-voltage = <4208000>; /* uV */
+		ti,termination-current = <128000>;  /* uA */
+		ti,precharge-current = <128000>; /* uA */
+		ti,minimum-sys-voltage = <3700000>; /* uV */
+		ti,boost-voltage = <5000000>; /* uV */
+		ti,boost-max-current = <1500000>; /* uA */
+		ti,use-vinmin-threshold = <1>; /* enable VINDPM */
+		ti,vinmin-threshold = <3900000>; /* uV */
+		monitored-battery = <&bat>;
+		power-supplies = <&typec_pd>;
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_csi1 {
+	assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+
+			mipi1_sensor_ep: endpoint {
+				remote-endpoint = <&camera1_ep>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	lcd_panel: panel@0 {
+		compatible = "mantix,mlaf057we51-x";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsirst>;
+		avdd-supply = <&reg_lcd_avdd>;
+		avee-supply = <&reg_lcd_avee>;
+		vddi-supply = <&reg_lcd_1v8>;
+		backlight = <&backlight_dsi>;
+		reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&buck3_reg>;
+};
+
+&pgc_mipi {
+	power-supply = <&ldo5_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_haptic>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_b>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_r>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_led_g>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
+&sai6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai6>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI6>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-synchronous-rx;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 { /* TPS - GPS - DEBUG */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	gnss {
+		compatible = "globaltop,pa6h";
+		vcc-supply = <&reg_gnss>;
+		current-speed = <9600>;
+	};
+};
+
+&uart3 { /* SMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 { /* BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_hub>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		typec_ss: endpoint {
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Microchip USB2642 */
+	hub@1 {
+		compatible = "usb424,2640";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mass-storage@1 {
+			compatible = "usb424,4041";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_vdd_3v3>;
+	vqmmc-supply = <&reg_vdd_1v8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wifi_3v3>;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	post-power-on-delay-ms = <20>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	max-frequency = <100000000>;
+	disable-wp;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&a53_opp_table {
+	opp-1000000000 {
+		opp-microvolt = <850000>;
+	};
+
+	opp-1500000000 {
+		opp-microvolt = <950000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
new file mode 100644
index 000000000..3ae3824be
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright 2019-2021 MNT Research GmbH
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mq-nitrogen-som.dtsi"
+
+/ {
+	model = "MNT Reform 2";
+	compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+	chassis-type = "laptop";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 10000 0>;
+		power-supply = <&reg_main_usb>;
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 32 64 128 160 200 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel {
+		compatible = "innolux,n125hce-gn1";
+		power-supply = <&reg_main_3v3>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_bridge_out>;
+			};
+		};
+	};
+
+	pcie1_refclk: clock-pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_main_5v: regulator-main-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_main_3v3: regulator-main-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_main_usb: regulator-main-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	reg_main_1v8: regulator-main-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_main_3v3>;
+	};
+
+	reg_main_1v2: regulator-main-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-cpu = <&sai2>;
+		audio-codec = <&wm8960>;
+		audio-routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"Mic Jack", "MICB",
+			"LINPUT2", "Line In Jack",
+			"RINPUT2", "Line In Jack";
+		model = "wm8960-audio";
+	};
+};
+
+&dphy {
+	assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
+	assigned-clock-rates = <25000000>;
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	wm8960: codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	edp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edp_bridge>;
+		reg = <0x2c>;
+		enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		vccio-supply = <&reg_main_1v8>;
+		vpll-supply = <&reg_main_1v8>;
+		vcca-supply = <&reg_main_1v2>;
+		vcc-supply = <&reg_main_1v2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				edp_bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				edp_bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
+	/delete-property/assigned-clock-rates;
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&edp_bridge_in>;
+			};
+		};
+	};
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie1_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&reg_1p8v {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_snvs {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_arm_dram {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_dram_1p1v {
+	vin-supply = <&reg_main_5v>;
+};
+
+&reg_soc_gpu_vpu {
+	vin-supply = <&reg_main_5v>;
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	assigned-clock-rates = <25000000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_main_usb>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_main_usb>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_main_3v3>;
+	vmmc-supply = <&reg_main_3v3>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x3
+		>;
+	};
+
+	pinctrl_edp_bridge: edpbridgegrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x16
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT			0x3
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
+			MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B		0x0
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
new file mode 100644
index 000000000..395f77b5a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Boundary Devices
+ * Copyright 2021 Lucas Stach <dev@lynxeye.de>
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MQ Nitrogen8M";
+	compatible = "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_1p8v: regulator-fixed-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_snvs: regulator-fixed-snvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SNVS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&{/opp-table/opp-800000000} {
+	opp-microvolt = <1000000>;
+};
+
+&{/opp-table/opp-1000000000} {
+	opp-microvolt = <1000000>;
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm_dram>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
+		reg = <0x70>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1a: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_arm_dram: regulator@60 {
+				compatible = "fcs,fan53555";
+				reg = <0x60>;
+				regulator-name = "VDD_ARM_DRAM_1V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+		};
+
+		i2c1b: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_dram_1p1v: regulator@60 {
+				compatible = "fcs,fan53555";
+				reg = <0x60>;
+				regulator-name = "NVCC_DRAM_1P1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+		};
+
+		i2c1c: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_soc_gpu_vpu: regulator@60 {
+				compatible = "fcs,fan53555";
+				reg = <0x60>;
+				regulator-name = "VDD_SOC_GPU_VPU";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+		};
+
+		i2c1d: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&reg_soc_gpu_vpu>;
+};
+
+&pgc_vpu {
+	power-supply = <&reg_soc_gpu_vpu>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&reg_1p8v>;
+	vmmc-supply = <&reg_snvs>;
+	bus-width = <8>;
+	non-removable;
+	no-mmc-hs400;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0xd1
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0xd1
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x1
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x41
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_i2c1_pca9546: i2c1-pca9546grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x49
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
new file mode 100644
index 000000000..8614c18b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018 Boundary Devices
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX8MQ Nitrogen8M";
+	compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-power {
+			label = "Power Button";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&ddc_i2c_bus>;
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&lt8912_out>;
+			};
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_0v9: regulator-vref-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-0v9";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+	};
+
+	reg_vref_1v8: regulator-vref-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vref_2v5: regulator-vref-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_vref_3v3: regulator-vref-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vref_5v: regulator-vref-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&dphy {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+/* Release reset of the USB Host HUB */
+&gpio1 {
+	usb-host-reset-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_pca9546>;
+		reg = <0x70>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1a: i2c1@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_arm_dram: regulator@60 {
+				compatible = "fcs,fan53555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_reg_arm_dram>;
+				reg = <0x60>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		i2c1b: i2c1@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_dram_1p1v: regulator@60 {
+				compatible = "fcs,fan53555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_reg_dram_1p1v>;
+				reg = <0x60>;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		i2c1c: i2c1@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg_soc_gpu_vpu: regulator@60 {
+				compatible = "fcs,fan53555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>;
+				reg = <0x60>;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		i2c1d: i2c1@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rtc@68 {
+				compatible = "microcrystal,rv4162";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1d_rv4162>;
+				reg = <0x68>;
+				interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
+				wakeup-source;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pca9546: i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			hdmi-bridge@48 {
+				compatible = "lontium,lt8912b";
+				reg = <0x48> ;
+				reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						hdmi_out_in: endpoint {
+							data-lanes = <1 2 3 4>;
+							remote-endpoint = <&mipi_dsi_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						lt8912_out: endpoint {
+							remote-endpoint = <&hdmi_connector_in>;
+						};
+					};
+				};
+			};
+		};
+
+		ddc_i2c_bus: i2c4@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <100000>;
+
+			max7323: gpio-expander@68 {
+				compatible = "maxim,max7323";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7323>;
+				gpio-controller;
+				reg = <0x68>;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&hdmi_out_in>;
+			};
+		};
+	};
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_0>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb3_1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	vmmc-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* J17 connector, odd */
+			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19	/* Pin 19 */
+			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19	/* Pin 21 */
+			MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x19	/* Pin 23 */
+			MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x19	/* Pin 25 */
+			MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x19	/* Pin 27 */
+			MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x19	/* Pin 29 */
+			MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x19	/* Pin 31 */
+			MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x19	/* Pin 33 */
+			MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x19	/* Pin 35 */
+			MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x19	/* Pin 39 */
+			MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x19	/* Pin 41 */
+			MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x19	/* Pin 43 */
+			MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x19	/* Pin 45 */
+			MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x19	/* Pin 47 */
+			MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x19	/* Pin 49 */
+			MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x19	/* Pin 51 */
+
+			/* J17 connector, even */
+			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19	/* Pin 44 */
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19	/* Pin 48 */
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x19	/* Pin 50 */
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x19	/* Pin 54 */
+			MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x19	/* Pin 56 */
+
+			/* J18 connector, odd */
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19	/* Pin 41 */
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19	/* Pin 43 */
+			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19	/* Pin 45 */
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19	/* Pin 47 */
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19	/* Pin 49 */
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19	/* Pin 53 */
+
+			/* J18 connector, even */
+			MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0			0x19	/* Pin 32 */
+			MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x19	/* Pin 36 */
+			MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6		0x19	/* Pin 38 */
+			MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7		0x19	/* Pin 40 */
+			MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8		0x19	/* Pin 42 */
+			MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9		0x19	/* Pin 44 */
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19	/* Pin 46 */
+
+			/* J13 Pin 2, WL_WAKE */
+			MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23		0xd6
+			/* J13 Pin 4, WL_IRQ, not needed for Silex */
+			MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21		0xd6
+			/* J13 pin 9, unused */
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x19
+			/* J13 Pin 41, BT_CLK_REQ */
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0xd6
+			/* J13 Pin 42, BT_HOST_WAKE */
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25		0xd6
+
+			/* Clock for both CSI1 and CSI2 */
+			MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2	0x07
+			/* test points */
+			MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4		0xc1	/* TP87 */
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x59
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+		>;
+	};
+
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c1_pca9546: i2c1-pca9546grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x49
+		>;
+	};
+
+	pinctrl_i2c1d_rv4162: i2c1d-rv4162grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x49
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_max7323: max7323grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19
+		>;
+	};
+
+	pinctrl_reg_arm_dram: reg-arm-dramgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x16
+		>;
+	};
+
+	pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11	0x16
+		>;
+	};
+
+	pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20		0x16
+		>;
+	};
+
+	pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x16
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x45
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x45
+		>;
+	};
+
+	pinctrl_usb3_0: usb3-0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x16
+		>;
+	};
+
+	pinctrl_usb3_1: usb3-1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x16
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10		0x41
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+		MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
new file mode 100644
index 000000000..a3b9d615a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2017-2019 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Google i.MX8MQ Phanbell";
+	compatible = "google,imx8mq-phanbell", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		status = "okay";
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_alert0: trip0 {
+			temperature = <75000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_alert1: trip1 {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_crit0: trip3 {
+			temperature = <90000>;
+			hysteresis = <2000>;
+			type = "critical";
+		};
+
+		fan_toggle0: trip4 {
+			temperature = <65000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+			<&A53_0 0 1>; /* Exclude highest OPP */
+		};
+
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+			<&A53_0 0 2>; /* Exclude two highest OPPs */
+		};
+
+		map4 {
+			trip = <&fan_toggle0>;
+			cooling-device = <&fan 0 1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		compatible = "rohm,bd71837";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		#clock-cells = <0>;
+		clocks = <&pmic_osc>;
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <900000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				rohm,dvs-run-voltage = <900000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x16
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
new file mode 100644
index 000000000..89cbec5c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Wandboard, Org.
+ * Copyright 2017 NXP
+ *
+ * Author: Richard Hu <hakahu@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TechNexion PICO-PI-8M";
+	compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	pmic_osc: clock-pmic {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic_osc";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_otg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pmic@4b {
+		reg = <0x4b>;
+		compatible = "rohm,bd71837";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		clocks = <&pmic_osc>;
+		clock-names = "osc";
+		clock-output-names = "pmic_clk";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <900000>;
+				rohm,dvs-idle-voltage = <850000>;
+				rohm,dvs-suspend-voltage = <800000>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3: BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				rohm,dvs-run-voltage = <1000000>;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			buck7: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+			};
+
+			buck8: BUCK8 {
+				regulator-name = "buck8";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+
+			ldo6: LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet_3v3: enet3v3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x19
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO	0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_otg_vbus: otgvbusgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19   /* USB OTG VBUS Enable */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x85
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc5
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x87
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc7
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x87
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12	0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
new file mode 100644
index 000000000..68e8fa172
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#ifndef __DTS_IMX8MQ_PINFUNC_H
+#define __DTS_IMX8MQ_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ               0x014 0x27C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ                        0x018 0x280 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF                                    0x01C 0x284 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B                                    0x020 0x288 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B                        0x024 0x28C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0                                   0x028 0x290 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT          0x028 0x290 0x4C0 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K                          0x028 0x290 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1                       0x028 0x290 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL                                    0x028 0x290 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1                                   0x02C 0x294 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT                                    0x02C 0x294 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M                          0x02C 0x294 0x4BC 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2                       0x02C 0x294 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO01_SJC_ACTIVE                                  0x02C 0x294 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_GPIO1_IO2                                   0x030 0x298 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B                                0x030 0x298 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY                              0x030 0x298 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO02_SJC_DE_B                                    0x030 0x298 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3                                   0x034 0x29C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_USDHC1_VSELECT                              0x034 0x29C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0                            0x034 0x29C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK                              0x034 0x29C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO03_SJC_DONE                                    0x034 0x29C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4                                   0x038 0x2A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT                              0x038 0x2A0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1                            0x038 0x2A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV                           0x038 0x2A0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO04_USDHC1_TEST_TRIG                            0x038 0x2A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5                                   0x03C 0x2A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_M4_NMI                                      0x03C 0x2A4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY                     0x03C 0x2A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT                       0x03C 0x2A4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO05_USDHC2_TEST_TRIG                            0x03C 0x2A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6                                   0x040 0x2A8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_ENET1_MDC                                   0x040 0x2A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_USDHC1_CD_B                                 0x040 0x2A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3                       0x040 0x2A8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO06_ECSPI1_TEST_TRIG                            0x040 0x2A8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7                                   0x044 0x2AC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_ENET1_MDIO                                  0x044 0x2AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_USDHC1_WP                                   0x044 0x2AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4                       0x044 0x2AC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO07_ECSPI2_TEST_TRIG                            0x044 0x2AC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8                                   0x048 0x2B0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN                        0x048 0x2B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_USDHC2_RESET_B                              0x048 0x2B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT                           0x048 0x2B0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO08_QSPI_TEST_TRIG                              0x048 0x2B0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9                                   0x04C 0x2B4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT                       0x04C 0x2B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0                            0x04C 0x2B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP                           0x04C 0x2B4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO09_RAWNAND_TEST_TRIG                           0x04C 0x2B4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10                                  0x050 0x2B8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_USB1_OTG_ID                                 0x050 0x2B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO10_OCOTP_CTRL_WRAPPER_FUSE_LATCHED             0x050 0x2B8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11                                  0x054 0x2BC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_USB2_OTG_ID                                 0x054 0x2BC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY                     0x054 0x2BC 0x4BC 0x5 0x1
+#define MX8MQ_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0                           0x054 0x2BC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO11_CAAM_WRAPPER_RNG_OSC_OBS                    0x054 0x2BC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12                                  0x058 0x2C0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_USB1_OTG_PWR                                0x058 0x2C0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1                            0x058 0x2C0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1                           0x058 0x2C0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO12_CSU_CSU_ALARM_AUT0                          0x058 0x2C0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13                                  0x05C 0x2C4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC                                 0x05C 0x2C4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT                                    0x05C 0x2C4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2                           0x05C 0x2C4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO13_CSU_CSU_ALARM_AUT1                          0x05C 0x2C4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14                                  0x060 0x2C8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_USB2_OTG_PWR                                0x060 0x2C8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT                                    0x060 0x2C8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1                          0x060 0x2C8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO14_CSU_CSU_ALARM_AUT2                          0x060 0x2C8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15                                  0x064 0x2CC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_USB2_OTG_OC                                 0x064 0x2CC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT                                    0x064 0x2CC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2                          0x064 0x2CC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_GPIO1_IO15_CSU_CSU_INT_DEB                             0x064 0x2CC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC                                     0x068 0x2D0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_MDC_GPIO1_IO16                                    0x068 0x2D0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO                                   0x06C 0x2D4 0x4C0 0x0 0x1
+#define MX8MQ_IOMUXC_ENET_MDIO_GPIO1_IO17                                   0x06C 0x2D4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3                               0x070 0x2D8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD3_GPIO1_IO18                                    0x070 0x2D8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2                               0x074 0x2DC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK                                  0x074 0x2DC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_TD2_GPIO1_IO19                                    0x074 0x2DC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1                               0x078 0x2E0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD1_GPIO1_IO20                                    0x078 0x2E0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0                               0x07C 0x2E4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TD0_GPIO1_IO21                                    0x07C 0x2E4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL                         0x080 0x2E8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TX_CTL_GPIO1_IO22                                 0x080 0x2E8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC                               0x084 0x2EC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_ENET1_TX_ER                                   0x084 0x2EC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_TXC_GPIO1_IO23                                    0x084 0x2EC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL                         0x088 0x2F0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RX_CTL_GPIO1_IO24                                 0x088 0x2F0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC                               0x08C 0x2F4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER                                   0x08C 0x2F4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25                                    0x08C 0x2F4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0                               0x090 0x2F8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD0_GPIO1_IO26                                    0x090 0x2F8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1                               0x094 0x2FC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27                                    0x094 0x2FC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2                               0x098 0x300 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD2_GPIO1_IO28                                    0x098 0x300 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3                               0x09C 0x304 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29                                    0x09C 0x304 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK                                     0x0A0 0x308 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_CLK_GPIO2_IO0                                      0x0A0 0x308 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA2_GPIO2_IO4                                    0x0B0 0x318 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3                                 0x0B4 0x31C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA3_GPIO2_IO5                                    0x0B4 0x31C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4                                 0x0B8 0x320 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA4_GPIO2_IO6                                    0x0B8 0x320 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5                                 0x0BC 0x324 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA5_GPIO2_IO7                                    0x0BC 0x324 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6                                 0x0C0 0x328 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA6_GPIO2_IO8                                    0x0C0 0x328 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7                                 0x0C4 0x32C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_DATA7_GPIO2_IO9                                    0x0C4 0x32C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B                             0x0C8 0x330 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10                                 0x0C8 0x330 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE                               0x0CC 0x334 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11                                  0x0CC 0x334 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B                                   0x0D0 0x338 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12                                    0x0D0 0x338 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK                                     0x0D4 0x33C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_GPIO2_IO13                                     0x0D4 0x33C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0                          0x0D4 0x33C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_CLK_OBSERVE_MUX_OUT0                               0x0D4 0x33C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD                                     0x0D8 0x340 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_GPIO2_IO14                                     0x0D8 0x340 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1                          0x0D8 0x340 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_CMD_OBSERVE_MUX_OUT1                               0x0D8 0x340 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0                                 0x0DC 0x344 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_GPIO2_IO15                                   0x0DC 0x344 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2                        0x0DC 0x344 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA0_OBSERVE_MUX_OUT2                             0x0DC 0x344 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1                                 0x0E0 0x348 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_GPIO2_IO16                                   0x0E0 0x348 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT                            0x0E0 0x348 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA1_OBSERVE_MUX_OUT3                             0x0E0 0x348 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2                                 0x0E4 0x34C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_GPIO2_IO17                                   0x0E4 0x34C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP                            0x0E4 0x34C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_DATA2_OBSERVE_MUX_OUT4                             0x0E4 0x34C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3                                 0x0E8 0x350 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_GPIO2_IO18                                   0x0E8 0x350 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET                     0x0E8 0x350 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_USDHC2_RESET_B                             0x0EC 0x354 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19                                 0x0EC 0x354 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET                  0x0EC 0x354 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SD2_WP_USDHC2_WP                                       0x0F0 0x358 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20                                      0x0F0 0x358 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD2_WP_SIM_M_HMASTLOCK                                 0x0F0 0x358 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_RAWNAND_ALE                                   0x0F4 0x35C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK                                   0x0F4 0x35C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0                                     0x0F4 0x35C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_ALE_SIM_M_HPROT0                                  0x0F4 0x35C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B                               0x0F8 0x360 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B                                0x0F8 0x360 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1                                   0x0F8 0x360 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE0_B_SIM_M_HPROT1                                0x0F8 0x360 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B                               0x0FC 0x364 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B                                0x0FC 0x364 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2                                   0x0FC 0x364 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE1_B_SIM_M_HPROT2                                0x0FC 0x364 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B                               0x100 0x368 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B                                0x100 0x368 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3                                   0x100 0x368 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE2_B_SIM_M_HPROT3                                0x100 0x368 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B                               0x104 0x36C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B                                0x104 0x36C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4                                   0x104 0x36C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CE3_B_SIM_M_HADDR0                                0x104 0x36C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_RAWNAND_CLE                                   0x108 0x370 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_QSPI_B_SCLK                                   0x108 0x370 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5                                     0x108 0x370 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_CLE_SIM_M_HADDR1                                  0x108 0x370 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_RAWNAND_DATA00                             0x10C 0x374 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0                               0x10C 0x374 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6                                  0x10C 0x374 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA00_SIM_M_HADDR2                               0x10C 0x374 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_RAWNAND_DATA01                             0x110 0x378 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1                               0x110 0x378 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7                                  0x110 0x378 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA01_SIM_M_HADDR3                               0x110 0x378 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_RAWNAND_DATA02                             0x114 0x37C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2                               0x114 0x37C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8                                  0x114 0x37C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA02_SIM_M_HADDR4                               0x114 0x37C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_RAWNAND_DATA03                             0x118 0x380 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3                               0x118 0x380 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9                                  0x118 0x380 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA03_SIM_M_HADDR5                               0x118 0x380 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_RAWNAND_DATA04                             0x11C 0x384 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_QSPI_B_DATA0                               0x11C 0x384 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10                                 0x11C 0x384 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA04_SIM_M_HADDR6                               0x11C 0x384 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_RAWNAND_DATA05                             0x120 0x388 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_QSPI_B_DATA1                               0x120 0x388 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11                                 0x120 0x388 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA05_SIM_M_HADDR7                               0x120 0x388 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_RAWNAND_DATA06                             0x124 0x38C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_QSPI_B_DATA2                               0x124 0x38C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12                                 0x124 0x38C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA06_SIM_M_HADDR8                               0x124 0x38C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_RAWNAND_DATA07                             0x128 0x390 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_QSPI_B_DATA3                               0x128 0x390 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13                                 0x128 0x390 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DATA07_SIM_M_HADDR9                               0x128 0x390 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_RAWNAND_DQS                                   0x12C 0x394 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_QSPI_A_DQS                                    0x12C 0x394 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14                                    0x12C 0x394 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_DQS_SIM_M_HADDR10                                 0x12C 0x394 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_RAWNAND_RE_B                                 0x130 0x398 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_QSPI_B_DQS                                   0x130 0x398 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17                                   0x138 0x3A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_WE_B_SIM_M_HADDR13                                0x138 0x3A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_RAWNAND_WP_B                                 0x13C 0x3A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18                                   0x13C 0x3A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_NAND_WP_B_SIM_M_HADDR14                                0x13C 0x3A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC                                 0x140 0x3A8 0x4E4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_SAI1_TX_DATA0                                0x140 0x3A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19                                   0x140 0x3A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_SAI5_RX_BCLK                                  0x144 0x3AC 0x4D0 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_SAI1_TX_DATA1                                 0x144 0x3AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20                                    0x144 0x3AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0                                0x148 0x3B0 0x4D4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_SAI1_TX_DATA2                                0x148 0x3B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21                                   0x148 0x3B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1                                0x14C 0x3B4 0x4D8 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_DATA3                                0x14C 0x3B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI1_TX_SYNC                                 0x14C 0x3B4 0x4CC 0x2 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC                                 0x14C 0x3B4 0x4EC 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22                                   0x14C 0x3B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2                                0x150 0x3B8 0x4DC 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
+#define MX8MQ_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI1_TX_SYNC                                 0x154 0x3BC 0x4CC 0x2 0x2
+#define MX8MQ_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0                                0x154 0x3BC 0x000 0x3 0x0
+#define MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24                                   0x154 0x3BC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI5_MCLK                                    0x158 0x3C0 0x52C 0x0 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI1_TX_BCLK                                 0x158 0x3C0 0x4C8 0x1 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_SAI4_MCLK                                    0x158 0x3C0 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25                                   0x158 0x3C0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI5_MCLK_CCMSRCGPCMIX_TESTER_ACK                      0x158 0x3C0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SAI1_RX_SYNC                                 0x15C 0x3C4 0x4C4 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SAI5_RX_SYNC                                 0x15C 0x3C4 0x4E4 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXFS_CORESIGHT_TRACE_CLK                          0x15C 0x3C4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0                                    0x15C 0x3C4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXFS_SIM_M_HADDR15                                0x15C 0x3C4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SAI1_RX_BCLK                                  0x160 0x3C8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SAI5_RX_BCLK                                  0x160 0x3C8 0x4D0 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXC_CORESIGHT_TRACE_CTL                           0x160 0x3C8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1                                     0x160 0x3C8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXC_SIM_M_HADDR16                                 0x160 0x3C8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SAI1_RX_DATA0                                0x164 0x3CC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SAI5_RX_DATA0                                0x164 0x3CC 0x4D4 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD0_CORESIGHT_TRACE0                             0x164 0x3CC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_GPIO4_IO2                                    0x164 0x3CC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_CCMSRCGPCMIX_BOOT_CFG0                       0x164 0x3CC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD0_SIM_M_HADDR17                                0x164 0x3CC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SAI1_RX_DATA1                                0x168 0x3D0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SAI5_RX_DATA1                                0x168 0x3D0 0x4D8 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD1_CORESIGHT_TRACE1                             0x168 0x3D0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3                                    0x168 0x3D0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_CCMSRCGPCMIX_BOOT_CFG1                       0x168 0x3D0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD1_SIM_M_HADDR18                                0x168 0x3D0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SAI1_RX_DATA2                                0x16C 0x3D4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SAI5_RX_DATA2                                0x16C 0x3D4 0x4DC 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD2_CORESIGHT_TRACE2                             0x16C 0x3D4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4                                    0x16C 0x3D4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_CCMSRCGPCMIX_BOOT_CFG2                       0x16C 0x3D4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD2_SIM_M_HADDR19                                0x16C 0x3D4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_SAI1_RX_DATA3                                0x170 0x3D8 0x4E0 0x0 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD3_SAI5_RX_DATA3                                0x170 0x3D8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_CORESIGHT_TRACE3                             0x170 0x3D8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5                                    0x170 0x3D8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_CCMSRCGPCMIX_BOOT_CFG3                       0x170 0x3D8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD3_SIM_M_HADDR20                                0x170 0x3D8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI1_RX_DATA4                                0x174 0x3DC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK                                 0x174 0x3DC 0x51C 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SAI6_RX_BCLK                                 0x174 0x3DC 0x510 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_CORESIGHT_TRACE4                             0x174 0x3DC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6                                    0x174 0x3DC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_CCMSRCGPCMIX_BOOT_CFG4                       0x174 0x3DC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD4_SIM_M_HADDR21                                0x174 0x3DC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_DATA5                                0x178 0x3E0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0                                0x178 0x3E0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0                                0x178 0x3E0 0x514 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SAI1_RX_SYNC                                 0x178 0x3E0 0x4C4 0x3 0x1
+#define MX8MQ_IOMUXC_SAI1_RXD5_CORESIGHT_TRACE5                             0x178 0x3E0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7                                    0x178 0x3E0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_CCMSRCGPCMIX_BOOT_CFG5                       0x178 0x3E0 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD5_SIM_M_HADDR22                                0x178 0x3E0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI1_RX_DATA6                                0x17C 0x3E4 0x520 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC                                 0x17C 0x3E4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC                                 0x17C 0x3E4 0x518 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_CORESIGHT_TRACE6                             0x17C 0x3E4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8                                    0x17C 0x3E4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_CCMSRCGPCMIX_BOOT_CFG6                       0x17C 0x3E4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD6_SIM_M_HADDR23                                0x17C 0x3E4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_RX_DATA7                                0x180 0x3E8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI6_MCLK                                    0x180 0x3E8 0x530 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC                                 0x180 0x3E8 0x4CC 0x2 0x4
+#define MX8MQ_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4                                0x180 0x3E8 0x000 0x3 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_CORESIGHT_TRACE7                             0x180 0x3E8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9                                    0x180 0x3E8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_CCMSRCGPCMIX_BOOT_CFG7                       0x180 0x3E8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_RXD7_SIM_M_HADDR24                                0x180 0x3E8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC                                 0x184 0x3EC 0x4CC 0x0 0x3
+#define MX8MQ_IOMUXC_SAI1_TXFS_SAI5_TX_SYNC                                 0x184 0x3EC 0x4EC 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXFS_CORESIGHT_EVENTO                             0x184 0x3EC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10                                   0x184 0x3EC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXFS_SIM_M_HADDR25                                0x184 0x3EC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_SAI1_TX_BCLK                                  0x188 0x3F0 0x4C8 0x0 0x1
+#define MX8MQ_IOMUXC_SAI1_TXC_SAI5_TX_BCLK                                  0x188 0x3F0 0x4E8 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXC_CORESIGHT_EVENTI                              0x188 0x3F0 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_GPIO4_IO11                                    0x188 0x3F0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXC_SIM_M_HADDR26                                 0x188 0x3F0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0                                0x18C 0x3F4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SAI5_TX_DATA0                                0x18C 0x3F4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_CORESIGHT_TRACE8                             0x18C 0x3F4 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_GPIO4_IO12                                   0x18C 0x3F4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_CCMSRCGPCMIX_BOOT_CFG8                       0x18C 0x3F4 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD0_SIM_M_HADDR27                                0x18C 0x3F4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1                                0x190 0x3F8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SAI5_TX_DATA1                                0x190 0x3F8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_CORESIGHT_TRACE9                             0x190 0x3F8 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13                                   0x190 0x3F8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_CCMSRCGPCMIX_BOOT_CFG9                       0x190 0x3F8 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD1_SIM_M_HADDR28                                0x190 0x3F8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2                                0x194 0x3FC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SAI5_TX_DATA2                                0x194 0x3FC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_CORESIGHT_TRACE10                            0x194 0x3FC 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14                                   0x194 0x3FC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_CCMSRCGPCMIX_BOOT_CFG10                      0x194 0x3FC 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD2_SIM_M_HADDR29                                0x194 0x3FC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3                                0x198 0x400 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SAI5_TX_DATA3                                0x198 0x400 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_CORESIGHT_TRACE11                            0x198 0x400 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15                                   0x198 0x400 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_CCMSRCGPCMIX_BOOT_CFG11                      0x198 0x400 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD3_SIM_M_HADDR30                                0x198 0x400 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4                                0x19C 0x404 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK                                 0x19C 0x404 0x510 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD4_SAI6_TX_BCLK                                 0x19C 0x404 0x51C 0x2 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD4_CORESIGHT_TRACE12                            0x19C 0x404 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16                                   0x19C 0x404 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_CCMSRCGPCMIX_BOOT_CFG12                      0x19C 0x404 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD4_SIM_M_HADDR31                                0x19C 0x404 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5                                0x1A0 0x408 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0                                0x1A0 0x408 0x514 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0                                0x1A0 0x408 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_CORESIGHT_TRACE13                            0x1A0 0x408 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17                                   0x1A0 0x408 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_CCMSRCGPCMIX_BOOT_CFG13                      0x1A0 0x408 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD5_SIM_M_HBURST0                                0x1A0 0x408 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6                                0x1A4 0x40C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_RX_SYNC                                 0x1A4 0x40C 0x518 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD6_SAI6_TX_SYNC                                 0x1A4 0x40C 0x520 0x2 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD6_CORESIGHT_TRACE14                            0x1A4 0x40C 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18                                   0x1A4 0x40C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_CCMSRCGPCMIX_BOOT_CFG14                      0x1A4 0x40C 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD6_SIM_M_HBURST1                                0x1A4 0x40C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7                                0x1A8 0x410 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SAI6_MCLK                                    0x1A8 0x410 0x530 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_TXD7_CORESIGHT_TRACE15                            0x1A8 0x410 0x000 0x4 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19                                   0x1A8 0x410 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_CCMSRCGPCMIX_BOOT_CFG15                      0x1A8 0x410 0x000 0x6 0x0
+#define MX8MQ_IOMUXC_SAI1_TXD7_SIM_M_HBURST2                                0x1A8 0x410 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_MCLK                                    0x1AC 0x414 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI5_MCLK                                    0x1AC 0x414 0x52C 0x1 0x1
+#define MX8MQ_IOMUXC_SAI1_MCLK_SAI1_TX_BCLK                                 0x1AC 0x414 0x4C8 0x2 0x2
+#define MX8MQ_IOMUXC_SAI1_MCLK_GPIO4_IO20                                   0x1AC 0x414 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0                                0x1B8 0x420 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23                                   0x1B8 0x420 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2                                 0x1B8 0x420 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC                                 0x1BC 0x424 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1                                0x1BC 0x424 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_GPIO4_IO24                                   0x1BC 0x424 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXFS_SIM_M_HWRITE                                 0x1BC 0x424 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK                                  0x1C0 0x428 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SAI5_TX_DATA2                                 0x1C0 0x428 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_GPIO4_IO25                                    0x1C0 0x428 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXC_SIM_M_HREADYOUT                               0x1C0 0x428 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0                                0x1C4 0x42C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3                                0x1C4 0x42C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_GPIO4_IO26                                   0x1C4 0x42C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_TXD0_TPSMP_CLK                                    0x1C4 0x42C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK                                    0x1C8 0x430 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_SAI5_MCLK                                    0x1C8 0x430 0x52C 0x1 0x2
+#define MX8MQ_IOMUXC_SAI2_MCLK_GPIO4_IO27                                   0x1C8 0x430 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI2_MCLK_TPSMP_HDATA_DIR                              0x1C8 0x430 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC                                 0x1CC 0x434 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1                                0x1CC 0x434 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC                                 0x1CC 0x434 0x4E4 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28                                   0x1CC 0x434 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0                                0x1CC 0x434 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK                                  0x1D0 0x438 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_GPT1_CAPTURE2                                 0x1D0 0x438 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_SAI5_RX_BCLK                                  0x1D0 0x438 0x4D0 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29                                    0x1D0 0x438 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXC_TPSMP_HTRANS1                                 0x1D0 0x438 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0                                 0x1D4 0x43C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_GPT1_COMPARE1                                 0x1D4 0x43C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_SAI5_RX_DATA0                                 0x1D4 0x43C 0x4D4 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_RXD_GPIO4_IO30                                    0x1D4 0x43C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_RXD_TPSMP_HDATA0                                  0x1D4 0x43C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_GPT1_CLK                                     0x1D8 0x440 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK                                  0x1DC 0x444 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_GPT1_COMPARE3                                 0x1E0 0x448 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_SAI5_RX_DATA3                                 0x1E0 0x448 0x4E0 0x2 0x2
+#define MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1                                     0x1E0 0x448 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_TXD_TPSMP_HDATA3                                  0x1E0 0x448 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK                                    0x1E4 0x44C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_PWM4_OUT                                     0x1E4 0x44C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_SAI5_MCLK                                    0x1E4 0x44C 0x52C 0x2 0x3
+#define MX8MQ_IOMUXC_SAI3_MCLK_GPIO5_IO2                                    0x1E4 0x44C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SAI3_MCLK_TPSMP_HDATA4                                 0x1E4 0x44C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT                                    0x1E8 0x450 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_PWM3_OUT                                      0x1E8 0x450 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3                                     0x1E8 0x450 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_TX_TPSMP_HDATA5                                  0x1E8 0x450 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN                                     0x1EC 0x454 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT                                      0x1EC 0x454 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4                                     0x1EC 0x454 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_RX_TPSMP_HDATA6                                  0x1EC 0x454 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK                           0x1F0 0x458 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT                                 0x1F0 0x458 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5                                0x1F0 0x458 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SPDIF_EXT_CLK_TPSMP_HDATA7                             0x1F0 0x458 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK                                0x1F4 0x45C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX                               0x1F4 0x45C 0x504 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX                               0x1F4 0x45C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6                                  0x1F4 0x45C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SCLK_TPSMP_HDATA8                               0x1F4 0x45C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI                                0x1F8 0x460 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX                               0x1F8 0x460 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX                               0x1F8 0x460 0x504 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_GPIO5_IO7                                  0x1F8 0x460 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MOSI_TPSMP_HDATA9                               0x1F8 0x460 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO                                0x1FC 0x464 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B                            0x1FC 0x464 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B                            0x1FC 0x464 0x500 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8                                  0x1FC 0x464 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_MISO_TPSMP_HDATA10                              0x1FC 0x464 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_ECSPI1_SS0                                  0x200 0x468 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B                             0x200 0x468 0x500 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B                             0x200 0x468 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9                                   0x200 0x468 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI1_SS0_TPSMP_HDATA11                               0x200 0x468 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK                                0x204 0x46C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX                               0x204 0x46C 0x50C 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX                               0x204 0x46C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10                                 0x204 0x46C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SCLK_TPSMP_HDATA12                              0x204 0x46C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI                                0x208 0x470 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX                               0x208 0x470 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX                               0x208 0x470 0x50C 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_GPIO5_IO11                                 0x208 0x470 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MOSI_TPSMP_HDATA13                              0x208 0x470 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO                                0x20C 0x474 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B                            0x20C 0x474 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B                            0x20C 0x474 0x508 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12                                 0x20C 0x474 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_MISO_TPSMP_HDATA14                              0x20C 0x474 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0                                  0x210 0x478 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B                             0x210 0x478 0x508 0x1 0x1
+#define MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B                             0x210 0x478 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13                                  0x210 0x478 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_ECSPI2_SS0_TPSMP_HDATA15                               0x210 0x478 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL                                      0x214 0x47C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_ENET1_MDC                                     0x214 0x47C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14                                    0x214 0x47C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C1_SCL_TPSMP_HDATA16                                 0x214 0x47C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA                                      0x218 0x480 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_ENET1_MDIO                                    0x218 0x480 0x4C0 0x1 0x2
+#define MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15                                    0x218 0x480 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C1_SDA_TPSMP_HDATA17                                 0x218 0x480 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL                                      0x21C 0x484 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN                          0x21C 0x484 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16                                    0x21C 0x484 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C2_SCL_TPSMP_HDATA18                                 0x21C 0x484 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA                                      0x220 0x488 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT                         0x220 0x488 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17                                    0x220 0x488 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C2_SDA_TPSMP_HDATA19                                 0x220 0x488 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL                                      0x224 0x48C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_PWM4_OUT                                      0x224 0x48C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_GPT2_CLK                                      0x224 0x48C 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18                                    0x224 0x48C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C3_SCL_TPSMP_HDATA20                                 0x224 0x48C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA                                      0x228 0x490 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_PWM3_OUT                                      0x228 0x490 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_GPT3_CLK                                      0x228 0x490 0x000 0x2 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19                                    0x228 0x490 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C3_SDA_TPSMP_HDATA21                                 0x228 0x490 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL                                      0x22C 0x494 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_PWM2_OUT                                      0x22C 0x494 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B                                0x22C 0x494 0x524 0x2 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_GPIO5_IO20                                    0x22C 0x494 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C4_SCL_TPSMP_HDATA22                                 0x22C 0x494 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA                                      0x230 0x498 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_PWM1_OUT                                      0x230 0x498 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B                                0x230 0x498 0x528 0x2 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_GPIO5_IO21                                    0x230 0x498 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_I2C4_SDA_TPSMP_HDATA23                                 0x230 0x498 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX                                 0x234 0x49C 0x4F4 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_UART1_DTE_TX                                 0x234 0x49C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_ECSPI3_SCLK                                  0x234 0x49C 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX                                 0x23C 0x4A4 0x4FC 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_UART2_DTE_TX                                 0x23C 0x4A4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_ECSPI3_MISO                                  0x23C 0x4A4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_GPIO5_IO24                                   0x23C 0x4A4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART2_RXD_TPSMP_HDATA26                                0x23C 0x4A4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX                                 0x240 0x4A8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_UART2_DTE_RX                                 0x240 0x4A8 0x4FC 0x0 0x1
+#define MX8MQ_IOMUXC_UART2_TXD_ECSPI3_SS0                                   0x240 0x4A8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_GPIO5_IO25                                   0x240 0x4A8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART2_TXD_TPSMP_HDATA27                                0x240 0x4A8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX                                 0x244 0x4AC 0x504 0x0 0x2
+#define MX8MQ_IOMUXC_UART3_RXD_UART3_DTE_TX                                 0x244 0x4AC 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART1_DCE_CTS_B                              0x244 0x4AC 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_UART1_DTE_RTS_B                              0x244 0x4AC 0x4F0 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_GPIO5_IO26                                   0x244 0x4AC 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART3_RXD_TPSMP_HDATA28                                0x244 0x4AC 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX                                 0x248 0x4B0 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_UART3_DTE_RX                                 0x248 0x4B0 0x504 0x0 0x3
+#define MX8MQ_IOMUXC_UART3_TXD_UART1_DCE_RTS_B                              0x248 0x4B0 0x4F0 0x1 0x1
+#define MX8MQ_IOMUXC_UART3_TXD_UART1_DTE_CTS_B                              0x248 0x4B0 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_GPIO5_IO27                                   0x248 0x4B0 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART3_TXD_TPSMP_HDATA29                                0x248 0x4B0 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX                                 0x24C 0x4B4 0x50C 0x0 0x2
+#define MX8MQ_IOMUXC_UART4_RXD_UART4_DTE_TX                                 0x24C 0x4B4 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B                              0x24C 0x4B4 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_UART2_DTE_RTS_B                              0x24C 0x4B4 0x4F8 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B                               0x24C 0x4B4 0x524 0x2 0x1
+#define MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28                                   0x24C 0x4B4 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART4_RXD_TPSMP_HDATA30                                0x24C 0x4B4 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX                                 0x250 0x4B8 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_UART4_DTE_RX                                 0x250 0x4B8 0x50C 0x0 0x3
+#define MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B                              0x250 0x4B8 0x4F8 0x1 0x1
+#define MX8MQ_IOMUXC_UART4_TXD_UART2_DTE_CTS_B                              0x250 0x4B8 0x000 0x1 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B                               0x250 0x4B8 0x528 0x2 0x1
+#define MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29                                   0x250 0x4B8 0x000 0x5 0x0
+#define MX8MQ_IOMUXC_UART4_TXD_TPSMP_HDATA31                                0x250 0x4B8 0x000 0x7 0x0
+#define MX8MQ_IOMUXC_TEST_MODE                                              0x000 0x254 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_BOOT_MODE0                                             0x000 0x258 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_BOOT_MODE1                                             0x000 0x25C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_MOD                                               0x000 0x260 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TRST_B                                            0x000 0x264 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TDI                                               0x000 0x268 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TMS                                               0x000 0x26C 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TCK                                               0x000 0x270 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_JTAG_TDO                                               0x000 0x274 0x000 0x0 0x0
+#define MX8MQ_IOMUXC_RTC                                                    0x000 0x278 0x000 0x0 0x0
+
+#endif /* __DTS_IMX8MQ_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
new file mode 100644
index 000000000..efc00f4ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com>
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <2000>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c01";
+		reg = <0x50>;
+		status = "okay";
+	};
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	/* SPI flash; not assembled by default */
+	spi_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "micron,n25q256a", "jedec,spi-nor";
+		spi-max-frequency = <29000000>;
+		status = "disabled";
+	};
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	assigned-clock-rates = <25000000>;
+	status = "okay";
+};
+
+&uart4 { /* ublox BT */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	assigned-clock-rates = <80000000>;
+	status = "okay";
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO	0x23
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x74
+			MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x16
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x16
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+			MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x19
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX		0x49
+			MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1			0x19
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
new file mode 100644
index 000000000..6e6182709
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "Einfochips i.MX8MQ Thor96";
+	compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user-led1 {
+			label = "green:user1";
+			gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user-led2 {
+			label = "green:user2";
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led3 {
+			label = "green:user3";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led4 {
+			label = "green:user4";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan-active-led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt-active-led {
+			label = "blue:bt";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	reg_usdhc1_vmmc: reg-usdhc1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc1_vqmmc: reg-usdhc1-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8_EXT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: reg-usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vqmmc: reg-usdhc2-vqmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "NVCC_SD2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* LS-SPI0 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* LS-I2C0 */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+/* HS-I2C2 */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+/* HS-I2C3 */
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <100000000>;
+		reg = <0>;
+	};
+};
+
+/* Debug UART */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_gpios>;
+	};
+};
+
+/* LS-UART1 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SDIO */
+&usdhc1 {
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	vqmmc-supply = <&reg_usdhc1_vqmmc>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	no-sd;
+	no-mmc;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt_gpios: btgpiosgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22		0x19
+			MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14		0x19
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x19
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x16
+			MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x16
+			MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x16
+			MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x16
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x4
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x24
+			MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1c
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1c
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1c
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1c
+			MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1c
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1c
+			MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x4000007f
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x4000007f
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21		0x19
+			MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22		0x19
+			MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x19
+			MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
+			MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1			0x19
+			MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x19
+		>;
+	};
+
+	pinctrl_qspi0: qspi0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82
+			MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+			MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+			MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+			MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+			MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B		0x49
+			MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B		0x49
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x49
+			MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x49
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K	0x85
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x8c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xcc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xcc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xcc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xcc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xcc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x9c
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xdc
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xdc
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xdc
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xdc
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xdc
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xcc
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x17059
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
new file mode 100644
index 000000000..0d8def276
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mq-tqma8mq.dtsi"
+#include "mba8mx.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
+	compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+	aliases {
+		eeprom0 = &eeprom3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &pcf85063;
+		rtc1 = &snvs_rtc;
+	};
+
+	extcon_usbotg: extcon-usbotg0 {
+		compatible = "linux,extcon-usb-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regotgvbus>;
+		regulator-name = "MBA8MQ_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&btn2 {
+	gpios = <&gpio3 17 GPIO_ACTIVE_LOW>;
+};
+
+&gpio_leds {
+	led3 {
+		label = "led3";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	expander2: gpio@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_expander>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mpcie-rst-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "MPCIE_RST#";
+		};
+	};
+};
+
+&irqsteer {
+	status = "okay";
+};
+
+&led2 {
+	gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie0 {
+	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+		 <&pcie0_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	status = "okay";
+};
+
+/*
+ * miniPCIe, also usable for cards with USB. Therefore configure the reset as
+ * static gpio hog.
+ */
+&pcie1 {
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&pcie1_refclk>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	status = "okay";
+};
+
+&sai3 {
+	assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
+	clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+};
+
+&tlv320aic3x04 {
+	clock-names = "mclk";
+	clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>;
+};
+
+&uart1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+&uart2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
+};
+
+/* console */
+&uart3 {
+	assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
+};
+
+&usb3_phy0 {
+	vbus-supply = <&reg_otg_vbus>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* we implement dual role but not full featured OTG */
+	extcon = <&extcon_usbotg>;
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x0000004e>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x0000004e>,
+			   <MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x0000004e>;
+	};
+
+	pinctrl_expander: expandergrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9		0xd6>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			   <MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23>,
+			   <MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91>,
+			   <MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f>,
+			   <MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91>,
+			   <MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			   <MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>;
+	};
+
+	pinctrl_gpiobutton: gpiobuttongrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x41>,
+			   <MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x41>,
+			   <MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x41>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x41>,
+			   <MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x41>,
+			   <MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16	0x41>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000067>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000067>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000067>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000067>,
+			   <MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000067>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT		0x16>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT		0x16>;
+	};
+
+	pinctrl_regotgvbus: reggotgvbusgrp {
+		/* USB1 OTG PWR as GPIO */
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x06>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0xc1>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6>,
+			   <MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX		0x79>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX		0x79>,
+			   <MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX		0x79>;
+	};
+
+	pinctrl_usbcon0: usb0congrp {
+		/* ID: floating / high: device, low: host -> use PU */
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0xe6>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x83>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x85>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK		0x9f>,
+			   <MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7>,
+			   <MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7>,
+			   <MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0xc1>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12		0x41>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
new file mode 100644
index 000000000..5ca6b2252
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2019-2021 TQ-Systems GmbH
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
+	compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
+
+	memory@40000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x40000000 0 0x40000000>;
+	};
+
+	/* e-MMC IO, needed for HS modes */
+	reg_vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MX_VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TQMA8MX_VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vdd_arm: regulator-vdd-arm {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvfs>;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-name = "TQMa8Mx_DVFS";
+		regulator-type = "voltage";
+		regulator-settling-time-us = <150000>;
+		gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		states = <900000 0x1 1000000 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 640 MiB */
+			size = <0 0x28000000>;
+			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
+			alloc-ranges = <0 0x40000000 0 0x78000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pfuze-support-disable-sw;
+		reg = <0x8>;
+
+		regulators {
+			/* VDD_GPU */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			/* VDD_VPU */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			/* NVCC_DRAM */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			/* VDD_DRAM */
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
+			nvcc_1v8_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* VDD_PHY_0V9 */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_1V8 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			/* VDDA_1V8 */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_3V3 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		quartz-load-femtofarads = <7000>;
+
+		clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	eeprom1: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	eeprom0: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&pcie0 {
+	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+	vph-supply = <&vgen5_reg>;
+};
+
+&pcie1 {
+	/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
+	vph-supply = <&vgen5_reg>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <84000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc1v8>;
+	status = "okay";
+};
+
+/* Attention: wdog reset forcing POR needs baseboard support */
+&wdog1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dvfs: dvfsgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x16>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL		0x4000007f>,
+			   <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA		0x4000007f>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000074>,
+			   <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000074>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x97>,
+			   <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,
+			   <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x97>,
+			   <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x97>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x41>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x83>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x83>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x85>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc5>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x85>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK		0x87>,
+			   <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc7>,
+			   <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE	0x87>,
+			   <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0xc1>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
new file mode 100644
index 000000000..be1e7d6f0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx8mq-zii-ultra.dtsi"
+
+/ {
+	model = "ZII Ultra RMB3 Board";
+	compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
+
+	sound1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound1_codec>;
+		simple-audio-card,frame-master = <&sound1_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack Front";
+		simple-audio-card,routing =
+			"Headphone Jack Front", "HPA1 HPLEFT",
+			"Headphone Jack Front", "HPA1 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound1_cpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		sound1_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+
+	sound2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "periph";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound2_codec>;
+		simple-audio-card,frame-master = <&sound2_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack Back";
+		simple-audio-card,routing =
+			"Headphone Jack Back", "HPA1 HPLEFT",
+			"Headphone Jack Back", "HPA1 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa2>;
+
+		sound2_cpu: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		sound2_codec: simple-audio-card,codec {
+			sound-dai = <&codec2>;
+			clocks = <&cs2000>;
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nor_flash: flash@0 {
+		compatible = "st,n25q128a13", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&hpa2 {
+	sound-name-prefix = "HPA1";
+};
+
+&i2c1 {
+	codec2: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec2>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_gen_3p3>;
+		SPRVDD-supply = <&reg_gen_3p3>;
+		SPLVDD-supply = <&reg_gen_3p3>;
+		AVDD-supply = <&reg_gen_3p3>;
+		IOVDD-supply = <&reg_gen_3p3>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	temp-sense@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&i2c4 {
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+			syna,delta-x-threshold = <5>;
+			syna,delta-y-threshold = <10>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+	touchscreen@2a {
+		compatible = "eeti,exc3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x2a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+		status = "disabled";
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	status = "okay";
+};
+
+&usbhub {
+	swap-dx-lanes = <0>;
+};
+
+&iomuxc {
+	pinctrl_codec2: dac2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x41
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x19
+			MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x82
+			MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x82
+			MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x82
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
new file mode 100644
index 000000000..f6130167a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx8mq-zii-ultra.dtsi"
+
+/ {
+	model = "ZII Ultra Zest Board";
+	compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq";
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack Front",
+			"Headphone", "Headphone Jack Back";
+		simple-audio-card,routing =
+			"Headphone Jack Front", "HPA1 HPLEFT",
+			"Headphone Jack Front", "HPA1 HPRIGHT",
+			"Headphone Jack Back", "HPA2 HPLEFT",
+			"Headphone Jack Back", "HPA2 HPRIGHT",
+			"HPA1 LEFTIN", "HPL",
+			"HPA1 RIGHTIN", "HPR",
+			"HPA2 LEFTIN", "HPL",
+			"HPA2 RIGHTIN", "HPR";
+		simple-audio-card,aux-devs = <&hpa1>, <&hpa2>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&codec1>;
+			clocks = <&cs2000>;
+		};
+	};
+};
+
+&i2c4 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		reg = <0x4a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
new file mode 100644
index 000000000..cb777b47b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -0,0 +1,862 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+#include "imx8mq.dtsi"
+
+/ {
+	aliases {
+		mdio-gpio0 = &mdio0;
+		rtc0 = &ds1341;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	mdio0: bitbang-mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>;
+		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pcie0_refclk: clock-pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie1_refclk: clock-pcie1-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_12p0_main: regulator-12p0-main {
+		compatible = "regulator-fixed";
+		regulator-name = "12V_MAIN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_5p0_main: regulator-5p0-main {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0_main>;
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3_main: regulator-3p3-main {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_12p0_main>;
+		regulator-name = "3V3_MAIN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_gen_3p3: regulator-gen-3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_3p3_main>;
+		regulator-name = "GEN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usdhc2_vmmc: regulator-vsd-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2>;
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_gen_3p3>;
+		regulator-name = "3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_arm: regulator-arm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_arm>;
+		compatible = "regulator-gpio";
+		vin-supply = <&reg_12p0_main>;
+		regulator-name = "0V9_ARM";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1000000>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		states = <1000000 0x1
+		           900000 0x0>;
+		regulator-always-on;
+	};
+
+	cs2000_ref: cs2000-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	cs2000_in_dummy: cs2000-in-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
+		status = "okay";
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-0 = <&pinctrl_switch_irq>;
+			pinctrl-names = "default";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "gigabit_proc";
+					phy-handle = <&switchphy0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+					phy-handle = <&switchphy1>;
+				};
+
+				port@2 {
+					reg = <2>;
+					phy-mode = "rev-rmii";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+					phy-handle = <&switchphy3>;
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+					phy-handle = <&switchphy4>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3_hog>;
+
+	usb-emulation-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "usb-emulation";
+	};
+
+	usb-mode1-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode1";
+	};
+
+	usb-pwr-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "usb-pwr-ctrl-en-n";
+	};
+
+	usb-mode2-hog {
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-mode2";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		reg = <0x1c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT2";
+		vdd-supply = <&reg_gen_3p3>;
+		vddio-supply = <&reg_gen_3p3>;
+	};
+
+	ucs1002: charger@32 {
+		compatible = "microchip,ucs1002";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ucs1002>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
+		             <18 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "a_det", "alert";
+	};
+
+	hpa2: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa2>;
+		reg = <0x60>;
+		power-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0_main>;
+		sound-name-prefix = "HPA2";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3ab {
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <975000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1675000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1625000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <3075000>;
+				regulator-max-microvolt = <3625000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	codec1: codec@18 {
+		compatible = "ti,tlv320dac3100";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec1>;
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		HPVDD-supply = <&reg_gen_3p3>;
+		SPRVDD-supply = <&reg_gen_3p3>;
+		SPLVDD-supply = <&reg_gen_3p3>;
+		AVDD-supply = <&reg_gen_3p3>;
+		IOVDD-supply = <&reg_gen_3p3>;
+		DVDD-supply = <&vgen4_reg>;
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpa1>;
+		reg = <0x60>;
+		power-gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		Vdd-supply = <&reg_5p0_main>;
+		sound-name-prefix = "HPA1";
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	usbhub: usbhub@2c {
+		compatible = "microchip,usb2513b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reg = <0x2c>;
+		reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	};
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+
+	cs2000: clkgen@4e {
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4e>;
+		#clock-cells = <0>;
+		clock-names = "clk_in", "ref_clk";
+		clocks = <&cs2000_in_dummy>, <&cs2000_ref>;
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24000000>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usb3_phy0 {
+	vbus-supply = <&ucs1002>;
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_5p0_main>;
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+	         <&pcie0_refclk>,
+	         <&clk IMX8MQ_CLK_PCIE1_PHY>,
+	         <&clk IMX8MQ_CLK_PCIE1_AUX>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+	         <&pcie1_refclk>,
+	         <&clk IMX8MQ_CLK_PCIE2_PHY>,
+	         <&clk IMX8MQ_CLK_PCIE2_AUX>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
+&pgc_gpu {
+	power-supply = <&sw1a_reg>;
+};
+
+&pgc_vpu {
+	power-supply = <&sw1c_reg>;
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	vqmmc-supply = <&sw4_reg>;
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+		>;
+	};
+
+	pinctrl_codec1: dac1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x41
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO		0x23
+			MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK		0x1f
+			MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER		0x91
+			MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+		>;
+	};
+
+	pinctrl_fec1_phy_reset: fec1phyresetgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29		0x11
+		>;
+	};
+
+	pinctrl_gpio3_hog: gpio3hoggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10		0x6
+			MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11		0x6
+			MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12		0x6
+			MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13		0x6
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x400000a2
+		>;
+	};
+
+	pinctrl_mdio_bitbang: bitbangmdiogrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x44
+			MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x64
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B		0x66
+			MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x6
+		>;
+	};
+
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B		0x66
+			MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x6
+		>;
+	};
+
+	pinctrl_reg_arm: regarmgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16		0x19
+		>;
+	};
+
+	pinctrl_reg_usdhc2: regusdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x41
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_switch_irq: switchgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x41
+		>;
+	};
+
+	pinctrl_tpa1: tpa6130-1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x41
+		>;
+	};
+
+	pinctrl_tpa2: tpa6130-2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x41
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x96
+			MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x96
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX		0x49
+			MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX		0x49
+		>;
+	};
+
+	pinctrl_ucs1002: ucs1002grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17		0x41
+			MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18		0x41
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x41
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x83
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xc3
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xc3
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xc3
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xc3
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xc3
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xc3
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xc3
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xc3
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xc3
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x83
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x8d
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xcd
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xcd
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xcd
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xcd
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xcd
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xcd
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xcd
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xcd
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xcd
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x8d
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK			0x9f
+			MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD			0xdf
+			MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0		0xdf
+			MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1		0xdf
+			MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2		0xdf
+			MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3		0xdf
+			MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4		0xdf
+			MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5		0xdf
+			MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6		0xdf
+			MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7		0xdf
+			MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x9f
+			MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x83
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc3
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc3
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc3
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc3
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc3
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x85
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc5
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc5
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc5
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc5
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc5
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK			0x87
+			MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD			0xc7
+			MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0		0xc7
+			MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1		0xc7
+			MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2		0xc7
+			MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3		0xc7
+			MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0xc1
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
new file mode 100644
index 000000000..052ba9baa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -0,0 +1,1876 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2017 NXP
+ * Copyright (C) 2017-2018 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <dt-bindings/clock/imx8mq-clock.h>
+#include <dt-bindings/power/imx8mq-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/imx8mq.h>
+#include "imx8mq-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gpc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc_25m: clock-osc-25m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "osc_25m";
+	};
+
+	osc_27m: clock-osc-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "osc_27m";
+	};
+
+	hdmi_phy_27m: clock-hdmi-phy-27m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+		clock-output-names = "hdmi_phy_27m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clk IMX8MQ_CLK_ARM>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000>;
+			/* Industrial only */
+			opp-supported-hw = <0xf>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <900000>;
+			/* Consumer only */
+			opp-supported-hw = <0xe>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0xc>, <0x4>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x8>, <0x3>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				vpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+		             <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+		             <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+		             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc: soc@0 {
+		compatible = "fsl,imx8mq-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
+		nvmem-cells = <&imx8mq_uid>;
+		nvmem-cell-names = "soc_unique_id";
+
+		etm0: etm@28440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28440000 0x1000>;
+			cpu = <&A53_0>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@28540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28540000 0x1000>;
+			cpu = <&A53_1>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@28640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28640000 0x1000>;
+			cpu = <&A53_2>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@28740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x28740000 0x1000>;
+			cpu = <&A53_3>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					ca_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					ca_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out_port>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+
+					ca_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel@28c03000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x28c03000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					hugo_funnel_in_port1: endpoint {
+					/* M4 input */
+					};
+				};
+				/* the other input ports are not connect to anything */
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf@28c04000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c04000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr@28c06000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x28c06000 0x1000>;
+			clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
+		aips1: bus@30000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30000000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			sai1: sai@30010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
+				         <&clk IMX8MQ_CLK_SAI1_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI6_IPG>,
+				         <&clk IMX8MQ_CLK_SAI6_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30040000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30040000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
+				         <&clk IMX8MQ_CLK_SAI5_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@30050000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI4_IPG>,
+				         <&clk IMX8MQ_CLK_SAI4_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO1_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO2_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO3_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO4_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_GPIO5_ROOT>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
+			};
+
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mq-tmu";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
+				little-endian;
+				fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+				fsl,tmu-calibration = <0x00000000 0x00000023>,
+						      <0x00000001 0x00000029>,
+						      <0x00000002 0x0000002f>,
+						      <0x00000003 0x00000035>,
+						      <0x00000004 0x0000003d>,
+						      <0x00000005 0x00000043>,
+						      <0x00000006 0x0000004b>,
+						      <0x00000007 0x00000051>,
+						      <0x00000008 0x00000057>,
+						      <0x00000009 0x0000005f>,
+						      <0x0000000a 0x00000067>,
+						      <0x0000000b 0x0000006f>,
+
+						      <0x00010000 0x0000001b>,
+						      <0x00010001 0x00000023>,
+						      <0x00010002 0x0000002b>,
+						      <0x00010003 0x00000033>,
+						      <0x00010004 0x0000003b>,
+						      <0x00010005 0x00000043>,
+						      <0x00010006 0x0000004b>,
+						      <0x00010007 0x00000055>,
+						      <0x00010008 0x0000005d>,
+						      <0x00010009 0x00000067>,
+						      <0x0001000a 0x00000070>,
+
+						      <0x00020000 0x00000017>,
+						      <0x00020001 0x00000023>,
+						      <0x00020002 0x0000002d>,
+						      <0x00020003 0x00000037>,
+						      <0x00020004 0x00000041>,
+						      <0x00020005 0x0000004b>,
+						      <0x00020006 0x00000057>,
+						      <0x00020007 0x00000063>,
+						      <0x00020008 0x0000006f>,
+
+						      <0x00030000 0x00000015>,
+						      <0x00030001 0x00000021>,
+						      <0x00030002 0x0000002d>,
+						      <0x00030003 0x00000039>,
+						      <0x00030004 0x00000045>,
+						      <0x00030005 0x00000053>,
+						      <0x00030006 0x0000005f>,
+						      <0x00030007 0x00000071>;
+				#thermal-sensor-cells = <1>;
+			};
+
+			wdog1: watchdog@30280000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@30290000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@302a0000 {
+				compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MQ_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			lcdif: lcd-controller@30320000 {
+				compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif";
+				reg = <0x30320000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+					 <&clk IMX8MQ_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MQ_CLK_DISP_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
+				status = "disabled";
+
+				port {
+					lcdif_mipi_dsi: endpoint {
+						remote-endpoint = <&mipi_dsi_lcdif_in>;
+					};
+				};
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mq-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			iomuxc_gpr: syscon@30340000 {
+				compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd";
+				reg = <0x30340000 0x10000>;
+
+				mux: mux-controller {
+					compatible = "mmio-mux";
+					#mux-control-cells = <1>;
+					mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */
+				};
+			};
+
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mq-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x4 0x8> describes fuses 0x410 and
+				 * 0x420).
+				 */
+				imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */
+					reg = <0x4 0x8>;
+				};
+
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
+					reg = <0x10 4>;
+				};
+
+				fec_mac_address: mac-address@90 { /* 0x640 */
+					reg = <0x90 6>;
+				};
+			};
+
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mq-anatop";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-rtc";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+					status = "disabled";
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mq-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc_25m>, <&osc_27m>,
+				         <&clk_ext1>, <&clk_ext2>,
+				         <&clk_ext3>, <&clk_ext4>;
+				clock-names = "ckil", "osc_25m", "osc_27m",
+				              "clk_ext1", "clk_ext2",
+				              "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>,
+						  <&clk IMX8MQ_CLK_A53_CORE>,
+						  <&clk IMX8MQ_CLK_NOC>,
+						  <&clk IMX8MQ_CLK_AUDIO_AHB>,
+						  <&clk IMX8MQ_AUDIO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_AUDIO_PLL2_BYPASS>,
+						  <&clk IMX8MQ_AUDIO_PLL1>,
+						  <&clk IMX8MQ_AUDIO_PLL2>;
+				assigned-clock-rates = <0>, <0>,
+						       <800000000>,
+						       <0>,
+						       <0>,
+						       <0>,
+						       <786432000>,
+						       <722534400>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>,
+							 <&clk IMX8MQ_ARM_PLL_OUT>,
+							 <0>,
+							 <&clk IMX8MQ_SYS2_PLL_500M>,
+							 <&clk IMX8MQ_AUDIO_PLL1>,
+							 <&clk IMX8MQ_AUDIO_PLL2>;
+			};
+
+			src: reset-controller@30390000 {
+				compatible = "fsl,imx8mq-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mq-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_mipi: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI>;
+					};
+
+					/*
+					 * As per comment in ATF source code:
+					 *
+					 * PCIE1 and PCIE2 share the
+					 * same reset signal, if we
+					 * power down PCIE2, PCIE1
+					 * will be held in reset too.
+					 *
+					 * So instead of creating two
+					 * separate power domains for
+					 * PCIE1 and PCIE2 we create a
+					 * link between both and use
+					 * it as a shared PCIE power
+					 * domain.
+					 */
+					pgc_pcie: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE1>;
+						power-domains = <&pgc_pcie2>;
+					};
+
+					pgc_otg1: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG1>;
+					};
+
+					pgc_otg2: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_USB_OTG2>;
+					};
+
+					pgc_ddr1: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DDR1>;
+					};
+
+					pgc_gpu: power-domain@5 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_GPU>;
+						clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+						         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+							 <&clk IMX8MQ_CLK_GPU_AXI>,
+						         <&clk IMX8MQ_CLK_GPU_AHB>;
+					};
+
+					pgc_vpu: power-domain@6 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_VPU>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+								  <&clk IMX8MQ_CLK_VPU_G2>,
+								  <&clk IMX8MQ_CLK_VPU_BUS>,
+								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_SYS1_PLL_800M>,
+									 <&clk IMX8MQ_VPU_PLL>;
+						assigned-clock-rates = <600000000>,
+								       <300000000>,
+								       <800000000>,
+								       <0>;
+					};
+
+					pgc_disp: power-domain@7 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_DISP>;
+					};
+
+					pgc_mipi_csi1: power-domain@8 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI1>;
+					};
+
+					pgc_mipi_csi2: power-domain@9 {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_MIPI_CSI2>;
+					};
+
+					pgc_pcie2: power-domain@a {
+						#power-domain-cells = <0>;
+						reg = <IMX8M_POWER_DOMAIN_PCIE2>;
+					};
+				};
+			};
+		};
+
+		aips2: bus@30400000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30400000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30400000 0x30400000 0x400000>;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mq-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
+				         <&clk IMX8MQ_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			system_counter: timer@306a0000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x306a0000 0x20000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_25m>;
+				clock-names = "per";
+			};
+		};
+
+		aips3: bus@30800000 { /* AIPS3 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x30800000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x30800000 0x30800000 0x400000>,
+				 <0x08000000 0x08000000 0x10000000>;
+
+			spdif1: spdif@30810000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x30810000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi1: spi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: spi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: spi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MQ_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART1_ROOT>,
+				         <&clk IMX8MQ_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART3_ROOT>,
+				         <&clk IMX8MQ_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART2_ROOT>,
+				         <&clk IMX8MQ_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			spdif2: spdif@308a0000 {
+				compatible = "fsl,imx35-spdif";
+				reg = <0x308a0000 0x10000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */
+					<&clk IMX8MQ_CLK_25M>, /* rxtx0 */
+					<&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */
+					<&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */
+					<&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */
+					<&clk IMX8MQ_CLK_DUMMY>; /* spba */
+				clock-names = "core", "rxtx0",
+					      "rxtx1", "rxtx2",
+					      "rxtx3", "rxtx4",
+					      "rxtx5", "rxtx6",
+					      "rxtx7", "spba";
+				dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@308b0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308b0000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI2_IPG>,
+					 <&clk IMX8MQ_CLK_SAI2_ROOT>,
+					 <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 10 24 0>, <&sdma1 11 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@308c0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mq-sai";
+				reg = <0x308c0000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SAI3_IPG>,
+				         <&clk IMX8MQ_CLK_SAI3_ROOT>,
+				         <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			crypto: crypto@30900000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x30900000 0x40000>;
+				ranges = <0 0x30900000 0x40000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_AHB>,
+					 <&clk IMX8MQ_CLK_IPG_ROOT>;
+				clock-names = "aclk", "ipg";
+
+				sec_jr0: jr@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
+
+				sec_jr1: jr@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr2: jr@3000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x3000 0x1000>;
+					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			mipi_dsi: dsi@30a00000 {
+				compatible = "fsl,imx8mq-nwl-dsi";
+				reg = <0x30a00000 0x300>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+					 <&clk IMX8MQ_CLK_DSI_AHB>,
+					 <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+					 <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+				clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+				assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
+						  <&clk IMX8MQ_CLK_DSI_CORE>,
+						  <&clk IMX8MQ_CLK_DSI_IPG_DIV>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
+							 <&clk IMX8MQ_SYS1_PLL_266M>;
+				assigned-clock-rates = <80000000>, <266000000>, <20000000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				mux-controls = <&mux 0>;
+				power-domains = <&pgc_mipi>;
+				phys = <&dphy>;
+				phy-names = "dphy";
+				resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+					 <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+				reset-names = "byte", "dpi", "esc", "pclk";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						mipi_dsi_lcdif_in: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&lcdif_mipi_dsi>;
+						};
+					};
+				};
+			};
+
+			dphy: dphy@30a00300 {
+				compatible = "fsl,imx8mq-mipi-dphy";
+				reg = <0x30a00300 0x100>;
+				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+				clock-names = "phy_ref";
+				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
+						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
+						  <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+						  <&clk IMX8MQ_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
+						  <&clk IMX8MQ_VIDEO_PLL1>,
+						  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
+				assigned-clock-rates = <0>, <0>, <24000000>, <594000000>;
+				#phy-cells = <0>;
+				power-domains = <&pgc_mipi>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C1_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C2_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C3_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_I2C4_ROOT>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mq-uart",
+				             "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_UART4_ROOT>,
+				         <&clk IMX8MQ_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			mipi_csi1: csi@30a70000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30a70000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				   <&clk IMX8MQ_CLK_CSI1_ESC>,
+				   <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+				    <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI1_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi1>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+				interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+
+						csi1_mipi_ep: endpoint {
+							remote-endpoint = <&csi1_ep>;
+						};
+					};
+				};
+			};
+
+			csi1: csi@30a90000 {
+				compatible = "fsl,imx8mq-csi";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi1_ep: endpoint {
+						remote-endpoint = <&csi1_mipi_ep>;
+					};
+				};
+			};
+
+			mipi_csi2: csi@30b60000 {
+				compatible = "fsl,imx8mq-mipi-csi2";
+				reg = <0x30b60000 0x1000>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				   <&clk IMX8MQ_CLK_CSI2_ESC>,
+				   <&clk IMX8MQ_CLK_CSI2_PHY_REF>;
+				clock-names = "core", "esc", "ui";
+				assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>,
+				    <&clk IMX8MQ_CLK_CSI2_PHY_REF>,
+				    <&clk IMX8MQ_CLK_CSI2_ESC>;
+				assigned-clock-rates = <266000000>, <333000000>, <66000000>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+					<&clk IMX8MQ_SYS2_PLL_1000M>,
+					<&clk IMX8MQ_SYS1_PLL_800M>;
+				power-domains = <&pgc_mipi_csi2>;
+				resets = <&src IMX8MQ_RESET_MIPI_CSI2_CORE_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET>,
+					 <&src IMX8MQ_RESET_MIPI_CSI2_ESC_RESET>;
+				fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>;
+				interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "dram";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@1 {
+						reg = <1>;
+
+						csi2_mipi_ep: endpoint {
+							remote-endpoint = <&csi2_ep>;
+						};
+					};
+				};
+			};
+
+			csi2: csi@30b80000 {
+				compatible = "fsl,imx8mq-csi";
+				reg = <0x30b80000 0x10000>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>;
+				clock-names = "mclk";
+				status = "disabled";
+
+				port {
+					csi2_ep: endpoint {
+						remote-endpoint = <&csi2_mipi_ep>;
+					};
+				};
+			};
+
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mq-usdhc",
+				             "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
+				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
+				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			qspi0: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mq-qspi", "fsl,imx7d-qspi";
+				reg = <0x30bb0000 0x10000>,
+				      <0x08000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_QSPI_ROOT>,
+					 <&clk IMX8MQ_CLK_QSPI_ROOT>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MQ_CLK_AHB>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
+				         <&clk IMX8MQ_CLK_ENET_TIMER>,
+				         <&clk IMX8MQ_CLK_ENET_REF>,
+				         <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+				              "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MQ_CLK_ENET_AXI>,
+						  <&clk IMX8MQ_CLK_ENET_TIMER>,
+						  <&clk IMX8MQ_CLK_ENET_REF>,
+						  <&clk IMX8MQ_CLK_ENET_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+							 <&clk IMX8MQ_SYS2_PLL_100M>,
+							 <&clk IMX8MQ_SYS2_PLL_125M>,
+							 <&clk IMX8MQ_SYS2_PLL_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
+				status = "disabled";
+			};
+		};
+
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MQ_CLK_NOC>;
+			fsl,ddrc = <&ddrc>;
+			#interconnect-cells = <1>;
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133000000 {
+					opp-hz = /bits/ 64 <133333333>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+				};
+			};
+		};
+
+		aips4: bus@32c00000 { /* AIPS4 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32c00000 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
+
+			irqsteer: interrupt-controller@32e2d000 {
+				compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+				reg = <0x32e2d000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+				clock-names = "ipg";
+				fsl,channel = <0>;
+				fsl,num-irqs = <64>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x40000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_GPU_ROOT>,
+			         <&clk IMX8MQ_CLK_GPU_SHADER_DIV>,
+			         <&clk IMX8MQ_CLK_GPU_AXI>,
+			         <&clk IMX8MQ_CLK_GPU_AHB>;
+			clock-names = "core", "shader", "bus", "reg";
+			#cooling-cells = <2>;
+			assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_SHADER_SRC>,
+			                  <&clk IMX8MQ_CLK_GPU_AXI>,
+			                  <&clk IMX8MQ_CLK_GPU_AHB>,
+			                  <&clk IMX8MQ_GPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL_OUT>,
+			                         <&clk IMX8MQ_GPU_PLL>;
+			assigned-clock-rates = <800000000>, <800000000>,
+			                       <800000000>, <800000000>, <0>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		usb_dwc3_0: usb@38100000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38100000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy0>, <&usb3_phy0>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg1>;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb3_phy0: usb-phy@381f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x381f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB1_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb_dwc3_1: usb@38200000 {
+			compatible = "fsl,imx8mq-dwc3", "snps,dwc3";
+			reg = <0x38200000 0x10000>;
+			clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>,
+			         <&clk IMX8MQ_CLK_USB_CORE_REF>,
+				 <&clk IMX8MQ_CLK_32K>;
+			clock-names = "bus_early", "ref", "suspend";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>,
+			                  <&clk IMX8MQ_CLK_USB_CORE_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_500M>,
+			                         <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <500000000>, <100000000>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy1>, <&usb3_phy1>;
+			phy-names = "usb2-phy", "usb3-phy";
+			power-domains = <&pgc_otg2>;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb3_phy1: usb-phy@382f0040 {
+			compatible = "fsl,imx8mq-usb-phy";
+			reg = <0x382f0040 0x40>;
+			clocks = <&clk IMX8MQ_CLK_USB2_PHY_ROOT>;
+			clock-names = "phy";
+			assigned-clocks = <&clk IMX8MQ_CLK_USB_PHY_REF>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_100M>;
+			assigned-clock-rates = <100000000>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+		};
+
+		vpu_blk_ctrl: blk-ctrl@38320000 {
+			compatible = "fsl,imx8mq-vpu-blk-ctrl";
+			reg = <0x38320000 0x100>;
+			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+			power-domain-names = "bus", "g1", "g2";
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			clock-names = "g1", "g2";
+			#power-domain-cells = <1>;
+		};
+
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33800000 0x400000>,
+			      <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			                <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <0>;
+			clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE1_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE1_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE1_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
+			status = "disabled";
+		};
+
+		pcie1: pcie@33c00000 {
+			compatible = "fsl,imx8mq-pcie";
+			reg = <0x33c00000 0x400000>,
+			      <0x27f00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
+				 <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <1>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+			         <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+			                  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+			                  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+			                         <&clk IMX8MQ_SYS2_PLL_100M>,
+			                         <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+			                       <10000000>;
+			status = "disabled";
+		};
+
+		pcie1_ep: pcie-ep@33c00000 {
+			compatible = "fsl,imx8mq-pcie-ep";
+			reg = <0x33c00000 0x000400000>,
+			      <0x20000000 0x08000000>;
+			reg-names = "dbi", "addr_space";
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma";
+			fsl,max-link-speed = <2>;
+			clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+				 <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIEPHY2>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>,
+					  <&clk IMX8MQ_CLK_PCIE2_PHY>,
+					  <&clk IMX8MQ_CLK_PCIE2_AUX>;
+			assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>,
+						 <&clk IMX8MQ_SYS2_PLL_100M>,
+						 <&clk IMX8MQ_SYS1_PLL_80M>;
+			assigned-clock-rates = <250000000>, <100000000>,
+					       <10000000>;
+			num-ib-windows = <4>;
+			num-ob-windows = <4>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>,	/* GIC Dist */
+			      <0x38880000 0xc0000>,	/* GICR */
+			      <0x31000000 0x2000>,	/* GICC */
+			      <0x31010000 0x2000>,	/* GICV */
+			      <0x31020000 0x2000>;	/* GICH */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+		};
+
+		ddrc: memory-controller@3d400000 {
+			compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc";
+			reg = <0x3d400000 0x400000>;
+			clock-names = "core", "pll", "alt", "apb";
+			clocks = <&clk IMX8MQ_CLK_DRAM_CORE>,
+				 <&clk IMX8MQ_DRAM_PLL_OUT>,
+				 <&clk IMX8MQ_CLK_DRAM_ALT>,
+				 <&clk IMX8MQ_CLK_DRAM_APB>;
+			status = "disabled";
+		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
new file mode 100644
index 000000000..5ab0921eb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-eval",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000..68ce58dc7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM/QP on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-ixora-v1.1",
+		     "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
new file mode 100644
index 000000000..c8ff75831
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-eval.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-eval.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Evaluation Board";
+	compatible = "toradex,apalis-imx8-v1.1-eval",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
new file mode 100644
index 000000000..ad7f64496
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.1 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.1",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
new file mode 100644
index 000000000..3b2e8c93b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1-ixora-v1.2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qm-apalis-v1.1.dtsi"
+#include "imx8-apalis-ixora-v1.2.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1 on Apalis Ixora V1.2 Carrier Board";
+	compatible = "toradex,apalis-imx8-v1.1-ixora-v1.2",
+		     "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
new file mode 100644
index 000000000..81ba8b283
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8qm.dtsi"
+#include "imx8-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM V1.1";
+	compatible = "toradex,apalis-imx8-v1.1",
+		     "fsl,imx8qm";
+};
+
+/* TODO: Cooling Maps */
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
new file mode 100644
index 000000000..1c6af9f54
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8qm-apalis-v1.1.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX8QM";
+	compatible = "toradex,apalis-imx8",
+		     "fsl,imx8qm";
+};
+
+&ethphy0 {
+	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+};
+
+/*
+ * Apalis iMX8QM V1.0 has PHY KSZ9031. the Micrel PHY driver
+ * doesn't support setting internal PHY delay for TXC line for
+ * this PHY model. Use delay on MAC side instead.
+ */
+&fec1 {
+	fsl,rgmii_txc_dly;
+	phy-mode = "rgmii-rxid";
+};
+
+/* TODO: Apalis HDMI1 */
+
+/* Apalis I2C2 (DDC) */
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_135",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_275",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_124",
+			  "MXM3_122",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "",
+			  "",
+			  "MXM3_4",
+			  "MXM3_211",
+			  "MXM3_209",
+			  "MXM3_2",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_112",
+			  "MXM3_118",
+			  "MXM3_114",
+			  "MXM3_116";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_286",
+			  "",
+			  "MXM3_87",
+			  "MXM3_99",
+			  "MXM3_138",
+			  "MXM3_140",
+			  "MXM3_239",
+			  "",
+			  "MXM3_281",
+			  "MXM3_283",
+			  "MXM3_126",
+			  "MXM3_132",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_173",
+			  "MXM3_175",
+			  "MXM3_123";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_198",
+			  "MXM3_35",
+			  "MXM3_164",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_217",
+			  "MXM3_215",
+			  "",
+			  "",
+			  "MXM3_193",
+			  "MXM3_194",
+			  "MXM3_37",
+			  "",
+			  "MXM3_271",
+			  "MXM3_273",
+			  "MXM3_195",
+			  "MXM3_197",
+			  "MXM3_177",
+			  "MXM3_179",
+			  "MXM3_181",
+			  "MXM3_183",
+			  "MXM3_185",
+			  "MXM3_187";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "MXM3_191",
+			  "",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_200",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_204",
+			  "MXM3_196",
+			  "",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "MXM3_305",
+			  "MXM3_307",
+			  "MXM3_309",
+			  "MXM3_311",
+			  "MXM3_315",
+			  "MXM3_317",
+			  "MXM3_319",
+			  "MXM3_321",
+			  "MXM3_15/GPIO7",
+			  "MXM3_63",
+			  "MXM3_17/GPIO8",
+			  "MXM3_12",
+			  "MXM3_14",
+			  "MXM3_16";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "MXM3_18",
+			  "MXM3_11/GPIO5",
+			  "MXM3_13/GPIO6",
+			  "MXM3_274",
+			  "MXM3_84",
+			  "MXM3_262",
+			  "MXM3_96",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "",
+			  "",
+			  "",
+			  "MXM3_269",
+			  "MXM3_251",
+			  "MXM3_253",
+			  "MXM3_295",
+			  "MXM3_299",
+			  "MXM3_301",
+			  "MXM3_297",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287";
+
+	/* Enable pcie root / sata ref clock unconditionally */
+	pcie-sata-hog {
+		gpios = <27 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_150",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_144",
+			  "MXM3_146",
+			  "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_159",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_186",
+			  "MXM3_188",
+			  "MXM3_176",
+			  "MXM3_178";
+};
+
+&lsio_gpio6 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_261",
+			  "MXM3_263",
+			  "MXM3_259",
+			  "MXM3_257",
+			  "MXM3_255",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_265",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_243";
+};
+
+&pinctrl_fec1 {
+	fsl,pins =
+		/* Use pads in 1.8V mode */
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020>,
+		<IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO				0x06000020>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL		0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2			0x06000020>,
+		<IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3			0x06000020>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M	0x06000020>,
+		/* On-module ETH_RESET# */
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x06000020>,
+		/* On-module ETH_INT# */
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000060>;
+};
+
+&pinctrl_fec1_sleep {
+	fsl,pins =
+		<IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD			0x000014a0>,
+		<IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14				0x04000040>,
+		<IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30				0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02			0x04000040>,
+		<IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04				0x04000040>,
+		<IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08			0x04000040>,
+		<IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09			0x04000040>,
+		<IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15			0x04000040>,
+		<IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11				0x04000040>,
+		<IMX8QM_LVDS0_GPIO01_LSIO_GPIO1_IO05				0x04000040>;
+};
+
+&iomuxc {
+	/* Apalis I2C2 (DDC) */
+	pinctrl_lpi2c0: lpi2c0grp {
+		fsl,pins =
+			<IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x04000022>,
+			<IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA			0x04000022>;
+	};
+};
+
+/* On-module PCIe_CTRL0_CLKREQ */
+&pinctrl_pcie_sata_refclk {
+	fsl,pins =
+		<IMX8QM_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27			0x00000021>;
+};
+
+/* TODO: On-module Wi-Fi */
+
+/* Apalis MMC1 */
+&usdhc2 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
+
+/* Apalis SD1 */
+&usdhc3 {
+	/*
+	 * The PMIC on V1.0A HW generates 1.6V instead of 1.8V which creates
+	 * issues with certain SD cards, disable 1.8V signaling for now.
+	 */
+	no-1-8-v;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
new file mode 100644
index 000000000..0b34cc225
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+/dts-v1/;
+
+#include "imx8qm.dtsi"
+
+/ {
+	model = "Freescale i.MX8QM MEK";
+	compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	thermal-zones {
+		/delete-node/ cpu1-thermal;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
+			IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QM_UART0_RX_DMA_UART0_RX				0x06000020
+			IMX8QM_UART0_TX_DMA_UART0_TX				0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK				0x06000041
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD				0x00000021
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
new file mode 100644
index 000000000..ec1639174
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&fec1 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&usdhc1 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
new file mode 100644
index 000000000..e9b198c13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&dma_subsys {
+	uart4_lpcg: clock-controller@5a4a0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5a4a0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_UART_4 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
+		clock-output-names = "uart4_lpcg_baud_clk",
+				     "uart4_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_UART_4>;
+	};
+
+	can1_lpcg: clock-controller@5ace0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5ace0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can1_lpcg_pe_clk",
+				     "can1_lpcg_ipg_clk",
+				     "can1_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_1>;
+	};
+
+	can2_lpcg: clock-controller@5acf0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x5acf0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>,
+			 <&dma_ipg_clk>, <&dma_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
+		clock-output-names = "can2_lpcg_pe_clk",
+				     "can2_lpcg_ipg_clk",
+				     "can2_lpcg_chi_clk";
+		power-domains = <&pd IMX_SC_R_CAN_2>;
+	};
+};
+
+&flexcan1 {
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan2 {
+	clocks = <&can1_lpcg 1>,
+		 <&can1_lpcg 0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&flexcan3 {
+	clocks = <&can2_lpcg 1>,
+		 <&can2_lpcg 0>;
+	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
+	fsl,clk-source = /bits/ 8 <1>;
+};
+
+&lpuart0 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart";
+};
+
+&i2c0 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c1 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
new file mode 100644
index 000000000..2bbdacb13
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+&jpegdec {
+	compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec";
+};
+
+&jpegenc {
+	compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
new file mode 100644
index 000000000..b483134f8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 6>,
+		      <&iomuxc 6 7 22>,
+		      <&iomuxc 28 36 4>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 4>,
+		      <&iomuxc 4 50 12>,
+		      <&iomuxc 16 63 8>,
+		      <&iomuxc 24 72 8>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 80 4>,
+		      <&iomuxc 4 85 18>,
+		      <&iomuxc 22 104 10>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 114 2>,
+		      <&iomuxc 2 117 16>,
+		      <&iomuxc 18 141 1>,
+		      <&iomuxc 19 140 1>,
+		      <&iomuxc 20 139 1>,
+		      <&iomuxc 21 138 1>,
+		      <&iomuxc 22 137 1>,
+		      <&iomuxc 23 136 1>,
+		      <&iomuxc 24 135 1>,
+		      <&iomuxc 25 134 1>,
+		      <&iomuxc 26 142 3>,
+		      <&iomuxc 29 146 3>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 149 3>,
+		      <&iomuxc 3 153 4>,
+		      <&iomuxc 7 158 6>,
+		      <&iomuxc 13 165 6>,
+		      <&iomuxc 19 172 8>,
+		      <&iomuxc 27 198 5>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 203 1>,
+		      <&iomuxc 1 205 2>,
+		      <&iomuxc 3 210 11>,
+		      <&iomuxc 14 223 3>,
+		      <&iomuxc 17 227 2>,
+		      <&iomuxc 19 230 5>,
+		      <&iomuxc 24 236 6>,
+		      <&iomuxc 30 243 2>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 245 10>,
+		      <&iomuxc 10 256 12>;
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu6 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
new file mode 100644
index 000000000..31744fc1a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qm.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		vpu-core0 = &vpu_core0;
+		vpu-core1 = &vpu_core1;
+		vpu-core2 = &vpu_core2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+		};
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A72_0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&A72_L2>;
+			operating-points-v2 = <&a72_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A72_1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
+			enable-method = "psci";
+			next-level-cache = <&A72_L2>;
+			operating-points-v2 = <&a72_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+
+		A72_L2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	a53_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-896000000 {
+			opp-hz = /bits/ 64 <896000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	a72_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1596000000 {
+			opp-hz = /bits/ 64 <1596000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xC0000>, /* GICR */
+		      <0x0 0x52000000 0 0x2000>,  /* GICC */
+		      <0x0 0x52010000 0 0x1000>,  /* GICH */
+		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,imx8qm-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8qm-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8qm-iomuxc";
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_A53>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_A72>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit1: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_GPU_0_PID0>;
+
+			trips {
+				gpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+	       gpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_GPU_1_PID0>;
+
+			trips {
+				gpu_alert1: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit1: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		drc0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_DRC_0>;
+
+			trips {
+				drc_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				drc_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-img.dtsi"
+	#include "imx8-ss-dma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8qm-ss-img.dtsi"
+#include "imx8qm-ss-dma.dtsi"
+#include "imx8qm-ss-conn.dtsi"
+#include "imx8qm-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
new file mode 100644
index 000000000..50bf7919c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 Einfochips
+ * Copyright 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/ {
+	model = "Einfochips i.MX8QXP AI_ML";
+	compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
+
+	aliases {
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+	};
+
+	chosen {
+		stdout-path = &lpuart2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		user-led1 {
+			label = "green:user1";
+			gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user-led2 {
+			label = "green:user2";
+			gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		user-led3 {
+			label = "green:user3";
+			gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led4 {
+			label = "green:user4";
+			gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan-active-led {
+			label = "yellow:wlan";
+			gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt-active-led {
+			label = "blue:bt";
+			gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_reg_on>;
+		reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* BT */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+/* Debug */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+	status = "okay";
+};
+
+/* PCI-E UART */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+/* WiFi */
+&usdhc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-sd;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD */
+&usdhc2 {
+	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06			0x00000021
+			IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07			0x00000021
+			IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16			0x00000021
+			IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x00000021
+			IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17			0x00000021
+			IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18			0x00000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QXP_UART0_RX_ADMA_UART0_RX				0X06000020
+			IMX8QXP_UART0_TX_ADMA_UART0_TX				0X06000020
+			IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B			0x06000020
+			IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B			0x06000020
+		>;
+	};
+
+	pinctrl_lpuart1: lpuart1grp {
+		fsl,pins = <
+			IMX8QXP_UART1_RX_ADMA_UART1_RX				0X06000020
+			IMX8QXP_UART1_TX_ADMA_UART1_TX				0X06000020
+		>;
+	};
+
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <
+			IMX8QXP_UART2_RX_ADMA_UART2_RX				0X06000020
+			IMX8QXP_UART2_TX_ADMA_UART2_TX				0X06000020
+		>;
+	};
+
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <
+			IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0X06000020
+			IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0X06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+			IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x00000021
+		>;
+	};
+
+	pinctrl_wifi_reg_on: wifiregongrp {
+		fsl,pins = <
+			IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24			0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
new file mode 100644
index 000000000..966ecfb2a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-aster.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-aster.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Aster Board";
+	compatible = "toradex,colibri-imx8x-aster",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
new file mode 100644
index 000000000..fe4597a6f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri-imx8x-eval-v3",
+		     "toradex,colibri-imx8x", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
new file mode 100644
index 000000000..cca33213f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris-v2.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris-v2.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris V2 Board";
+	compatible = "toradex,colibri-imx8x-iris-v2",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
new file mode 100644
index 000000000..fed75b5d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-iris.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8qxp-colibri.dtsi"
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP on Colibri Iris Board";
+	compatible = "toradex,colibri-imx8x-iris",
+		     "toradex,colibri-imx8x",
+		     "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
new file mode 100644
index 000000000..0f1aa31dd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include "imx8qxp.dtsi"
+#include "imx8x-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX8QXP Module";
+	compatible = "toradex,colibri-imx8x", "fsl,imx8qxp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
new file mode 100644
index 000000000..7924b0969
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017~2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "Freescale i.MX8QXP MEK";
+	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
+
+	chosen {
+		stdout-path = &lpuart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-sbu-mux {
+		compatible = "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+};
+
+&dsp {
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9646", "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			max7322: gpio@68 {
+				compatible = "maxim,max7322";
+				reg = <0x68>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			pressure-sensor@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			pca9557_a: gpio@1a {
+				compatible = "nxp,pca9557";
+				reg = <0x1a>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pca9557_b: gpio@1d {
+				compatible = "nxp,pca9557";
+				reg = <0x1d>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isl29023>;
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&lsio_gpio1>;
+				interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			};
+		};
+	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x50>;
+		interrupt-parent = <&lsio_gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+
+		usb_con1: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&mu_m0 {
+	status = "okay";
+};
+
+&mu1_m0 {
+	status = "okay";
+};
+
+&scu_key {
+	status = "okay";
+};
+
+&thermal_zones {
+	pmic-thermal {
+		polling-delay-passive = <250>;
+		polling-delay = <2000>;
+		thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
+
+		trips {
+			pmic_alert0: trip0 {
+				temperature = <110000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+
+			pmic_crit0: trip1 {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_alert0>;
+				cooling-device =
+					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&usbotg3 {
+	status = "okay";
+};
+
+&usbotg3_cdns3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+
+&vpu {
+	compatible = "nxp,imx8qxp-vpu";
+	status = "okay";
+};
+
+&vpu_core0 {
+	reg = <0x2d040000 0x10000>;
+	memory-region = <&decoder_boot>, <&decoder_rpc>;
+	status = "okay";
+};
+
+&vpu_core1 {
+	reg = <0x2d050000 0x10000>;
+	memory-region = <&encoder_boot>, <&encoder_rpc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
+			IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3		0x06000020
+			IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x06000020
+			IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x06000020
+			IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2		0x06000020
+			IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3		0x06000020
+		>;
+	};
+
+	pinctrl_ioexp_rst: ioexprstgrp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01			0x06000021
+		>;
+	};
+
+	pinctrl_isl29023: isl29023grp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02			0x00000021
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL			0x06000021
+			IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA			0x06000021
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QXP_UART0_RX_ADMA_UART0_RX				0x06000020
+			IMX8QXP_UART0_TX_ADMA_UART0_TX				0x06000020
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03                        0x06000021
+		>;
+	};
+
+	pinctrl_typec_mux: typecmuxgrp {
+		fsl,pins = <
+			IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09           0x60
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041
+			IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x00000021
+			IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0			0x00000021
+			IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1			0x00000021
+			IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2			0x00000021
+			IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3			0x00000021
+			IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4			0x00000021
+			IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5			0x00000021
+			IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6			0x00000021
+			IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7			0x00000021
+			IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE			0x00000041
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041
+			IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x00000021
+			IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0			0x00000021
+			IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1			0x00000021
+			IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2			0x00000021
+			IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3			0x00000021
+			IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x00000021
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
new file mode 100644
index 000000000..7bae51600
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lpuart0 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&lpuart1 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&lpuart2 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&lpuart3 {
+	compatible = "fsl,imx8qxp-lpuart";
+};
+
+&i2c0 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c1 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c2 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
+
+&i2c3 {
+	compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
new file mode 100644
index 000000000..46da21af3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&usdhc1 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc2 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&usdhc3 {
+	compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
+
+&fec1 {
+	compatible = "fsl,imx8qxp-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
+
+&fec2 {
+	compatible = "fsl,imx8qxp-fec", "fsl,imx8qm-fec", "fsl,imx6sx-fec";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
new file mode 100644
index 000000000..3a0873175
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&jpegdec {
+	compatible = "nxp,imx8qxp-jpgdec";
+};
+
+&jpegenc {
+	compatible = "nxp,imx8qxp-jpgenc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
new file mode 100644
index 000000000..8f722b1dd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+&lsio_gpio0 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 1 56 12>,
+		      <&iomuxc 13 69 4>,
+		      <&iomuxc 19 75 4>,
+		      <&iomuxc 24 80 1>,
+		      <&iomuxc 25 82 7>;
+};
+
+&lsio_gpio1 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 89 9>,
+		      <&iomuxc 9 99 16>,
+		      <&iomuxc 25 116 7>;
+};
+
+&lsio_gpio2 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 123 1>,
+		      <&iomuxc 1 126 2>,
+		      <&iomuxc 3 129 1>;
+};
+
+&lsio_gpio3 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 146 4>,
+		      <&iomuxc 4 151 13>,
+		      <&iomuxc 17 165 8>;
+};
+
+&lsio_gpio4 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 0 3>,
+		      <&iomuxc 3 4 4>,
+		      <&iomuxc 7 9 6>,
+		      <&iomuxc 13 16 6>,
+		      <&iomuxc 19 23 2>,
+		      <&iomuxc 21 26 2>,
+		      <&iomuxc 23 30 6>,
+		      <&iomuxc 29 37 3>;
+};
+
+&lsio_gpio5 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+	gpio-ranges = <&iomuxc 0 40 3>,
+		      <&iomuxc 3 44 6>,
+		      <&iomuxc 9 51 3>;
+};
+
+&lsio_gpio6 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_gpio7 {
+	compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
+};
+
+&lsio_mu0 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu1 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu2 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu3 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu4 {
+	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu6 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu13 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
new file mode 100644
index 000000000..c80c85a4b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2020 NXP
+ *	Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &lsio_gpio0;
+		gpio1 = &lsio_gpio1;
+		gpio2 = &lsio_gpio2;
+		gpio3 = &lsio_gpio3;
+		gpio4 = &lsio_gpio4;
+		gpio5 = &lsio_gpio5;
+		gpio6 = &lsio_gpio6;
+		gpio7 = &lsio_gpio7;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		mu0 = &lsio_mu0;
+		mu1 = &lsio_mu1;
+		mu2 = &lsio_mu2;
+		mu3 = &lsio_mu3;
+		mu4 = &lsio_mu4;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		vpu-core0 = &vpu_core0;
+		vpu-core1 = &vpu_core1;
+		vpu-core2 = &vpu_core2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/* We have 1 clusters with 4 Cortex-A35 cores */
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&A35_L2>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
+			operating-points-v2 = <&a35_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+		};
+	};
+
+	a35_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <150000>;
+			opp-suspend;
+		};
+	};
+
+	gic: interrupt-controller@51a00000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		decoder_boot: decoder-boot@84000000 {
+			reg = <0 0x84000000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_boot: encoder-boot@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		decoder_rpc: decoder-rpc@92000000 {
+			reg = <0 0x92000000 0 0x100000>;
+			no-map;
+		};
+
+		dsp_reserved: dsp@92400000 {
+			reg = <0 0x92400000 0 0x2000000>;
+			no-map;
+		};
+
+		encoder_rpc: encoder-rpc@94400000 {
+			reg = <0 0x94400000 0 0x700000>;
+			no-map;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	system-controller {
+		compatible = "fsl,imx-scu";
+		mbox-names = "tx0",
+			     "rx0",
+			     "gip3";
+		mboxes = <&lsio_mu1 0 0
+			  &lsio_mu1 1 0
+			  &lsio_mu1 3 3>;
+
+		pd: power-controller {
+			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
+		clk: clock-controller {
+			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+			#clock-cells = <2>;
+		};
+
+		iomuxc: pinctrl {
+			compatible = "fsl,imx8qxp-iomuxc";
+		};
+
+		ocotp: ocotp {
+			compatible = "fsl,imx8qxp-scu-ocotp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		scu_key: keys {
+			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+			linux,keycodes = <KEY_POWER>;
+			status = "disabled";
+		};
+
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
+
+		watchdog {
+			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	xtal32k: clock-xtal32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32KHz";
+	};
+
+	xtal24m: clock-xtal24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal_24MHz";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	/* sorted in register address */
+	#include "imx8-ss-img.dtsi"
+	#include "imx8-ss-vpu.dtsi"
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
+};
+
+#include "imx8qxp-ss-img.dtsi"
+#include "imx8qxp-ss-adma.dtsi"
+#include "imx8qxp-ss-conn.dtsi"
+#include "imx8qxp-ss-lsio.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
new file mode 100644
index 000000000..69dd8e310
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+	model = "NXP i.MX8ULP EVK";
+	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+	chosen {
+		stdout-path = &lpuart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0 0x28000000>;
+			linux,cma-default;
+		};
+
+		m33_reserved: noncacheable-section@a8600000 {
+			reg = <0 0xa8600000 0 0x1000000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@1fff8000{
+			reg = <0 0x1fff8000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@aff00000 {
+			reg = <0 0xaff00000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@aff08000 {
+			reg = <0 0xaff08000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@aff10000 {
+			reg = <0 0xaff10000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@aff18000 {
+			reg = <0 0xaff18000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa8400000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	clock_ext_rmii: clock-ext-rmii {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_rmii_clk";
+		#clock-cells = <0>;
+	};
+
+	clock_ext_ts: clock-ext-ts {
+		compatible = "fixed-clock";
+		/* External ts clock is 50MHZ from PHY on EVK board. */
+		clock-frequency = <50000000>;
+		clock-output-names = "ext_ts_clk";
+		#clock-cells = <0>;
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu 0 1>,
+		 <&mu 1 1>,
+		 <&mu 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&flexspi2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexspi2_ptd>;
+	pinctrl-1 = <&pinctrl_flexspi2_ptd>;
+	status = "okay";
+
+	mx25uw51345gxdi00: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <200000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&lpuart5 {
+	/* console */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-1 = <&pinctrl_lpuart5>;
+	status = "okay";
+};
+
+&lpi2c7 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c7>;
+	pinctrl-1 = <&pinctrl_lpi2c7>;
+	status = "okay";
+
+	pcal6408: gpio@21 {
+		compatible = "nxp,pcal9554b";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_enet>;
+	pinctrl-1 = <&pinctrl_enet>;
+	clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+		 <&pcc4 IMX8ULP_CLK_ENET>,
+		 <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
+		 <&clock_ext_rmii>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clock_ext_ts>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+		};
+	};
+};
+
+&mu {
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE15__ENET0_MDC     0x43
+			MX8ULP_PAD_PTE14__ENET0_MDIO    0x43
+			MX8ULP_PAD_PTE17__ENET0_RXER    0x43
+			MX8ULP_PAD_PTE18__ENET0_CRS_DV  0x43
+			MX8ULP_PAD_PTF1__ENET0_RXD0     0x43
+			MX8ULP_PAD_PTE20__ENET0_RXD1    0x43
+			MX8ULP_PAD_PTE16__ENET0_TXEN    0x43
+			MX8ULP_PAD_PTE23__ENET0_TXD0    0x43
+			MX8ULP_PAD_PTE22__ENET0_TXD1    0x43
+			MX8ULP_PAD_PTE19__ENET0_REFCLK  0x43
+			MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+		>;
+	};
+
+	pinctrl_flexspi2_ptd: flexspi2ptdgrp {
+		fsl,pins = <
+
+			MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B	0x42
+			MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK	0x42
+			MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3	0x42
+			MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2	0x42
+			MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1	0x42
+			MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0	0x42
+			MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS	0x42
+			MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7	0x42
+			MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6	0x42
+			MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5	0x42
+			MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4	0x42
+		>;
+	};
+
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
+			MX8ULP_PAD_PTF15__LPUART5_RX	0x3
+		>;
+	};
+
+	pinctrl_lpi2c7: lpi2c7grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE12__LPI2C7_SCL	0x20
+			MX8ULP_PAD_PTE13__LPI2C7_SDA	0x20
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD1__SDHC0_CMD	0x3
+			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10002
+			MX8ULP_PAD_PTD10__SDHC0_D0	0x3
+			MX8ULP_PAD_PTD9__SDHC0_D1	0x3
+			MX8ULP_PAD_PTD8__SDHC0_D2	0x3
+			MX8ULP_PAD_PTD7__SDHC0_D3	0x3
+			MX8ULP_PAD_PTD6__SDHC0_D4	0x3
+			MX8ULP_PAD_PTD5__SDHC0_D5	0x3
+			MX8ULP_PAD_PTD4__SDHC0_D6	0x3
+			MX8ULP_PAD_PTD3__SDHC0_D7	0x3
+			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10002
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
new file mode 100644
index 000000000..b204ac79b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h
@@ -0,0 +1,978 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __DTS_IMX8ULP_PINFUNC_H
+#define __DTS_IMX8ULP_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg input_reg mux_mode input_val>
+ */
+#define MX8ULP_PAD_PTD0__PTD0                                        0x0000 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD0__I2S6_RX_BCLK                                0x0000 0x0B44 0x7 0x1
+#define MX8ULP_PAD_PTD0__SDHC0_RESET_B                               0x0000 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD0__FLEXSPI2_B_DQS                              0x0000 0x0974 0x9 0x1
+#define MX8ULP_PAD_PTD0__CLKOUT2                                     0x0000 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD0__EPDC0_SDCLK_B                               0x0000 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD0__LP_APD_DBG_MUX_0                            0x0000 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD0__CLKOUT1                                     0x0000 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD0__DEBUG_MUX0_0                                0x0000 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD0__DEBUG_MUX1_0                                0x0000 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD1__PTD1                                        0x0004 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD1__I2S6_RX_FS                                  0x0004 0x0B48 0x7 0x1
+#define MX8ULP_PAD_PTD1__SDHC0_CMD                                   0x0004 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD1__FLEXSPI2_B_DATA7                            0x0004 0x0970 0x9 0x1
+#define MX8ULP_PAD_PTD1__EPDC0_SDCLK                                 0x0004 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD1__DPI0_PCLK                                   0x0004 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD1__LP_APD_DBG_MUX_1                            0x0004 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD1__DEBUG_MUX0_1                                0x0004 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD1__DEBUG_MUX1_1                                0x0004 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD2__PTD2                                        0x0008 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD2__I2S6_RXD0                                   0x0008 0x0B34 0x7 0x1
+#define MX8ULP_PAD_PTD2__SDHC0_CLK                                   0x0008 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD2__FLEXSPI2_B_DATA6                            0x0008 0x096C 0x9 0x1
+#define MX8ULP_PAD_PTD2__EPDC0_SDLE                                  0x0008 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD2__DPI0_HSYNC                                  0x0008 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD2__LP_APD_DBG_MUX_2                            0x0008 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD2__DEBUG_MUX0_2                                0x0008 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD2__DEBUG_MUX1_2                                0x0008 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD3__PTD3                                        0x000C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD3__I2S6_RXD1                                   0x000C 0x0B38 0x7 0x1
+#define MX8ULP_PAD_PTD3__SDHC0_D7                                    0x000C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD3__FLEXSPI2_B_DATA5                            0x000C 0x0968 0x9 0x1
+#define MX8ULP_PAD_PTD3__EPDC0_GDSP                                  0x000C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD3__DPI0_VSYNC                                  0x000C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD3__LP_APD_DBG_MUX_3                            0x000C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD3__DEBUG_MUX0_3                                0x000C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD3__DEBUG_MUX1_3                                0x000C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD4__PTD4                                        0x0010 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD4__EXT_AUD_MCLK3                               0x0010 0x0B14 0x4 0x1
+#define MX8ULP_PAD_PTD4__SDHC0_VS                                    0x0010 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD4__TPM8_CH5                                    0x0010 0x0B2C 0x6 0x1
+#define MX8ULP_PAD_PTD4__I2S6_MCLK                                   0x0010 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD4__SDHC0_D6                                    0x0010 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD4__FLEXSPI2_B_DATA4                            0x0010 0x0964 0x9 0x1
+#define MX8ULP_PAD_PTD4__EPDC0_SDCE0                                 0x0010 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD4__DPI0_DE                                     0x0010 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD4__LP_APD_DBG_MUX_4                            0x0010 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD4__DEBUG_MUX0_4                                0x0010 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD4__DEBUG_MUX1_4                                0x0010 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD5__PTD5                                        0x0014 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD5__SDHC0_CD                                    0x0014 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD5__TPM8_CH4                                    0x0014 0x0B28 0x6 0x1
+#define MX8ULP_PAD_PTD5__I2S6_TX_BCLK                                0x0014 0x0B4C 0x7 0x1
+#define MX8ULP_PAD_PTD5__SDHC0_D5                                    0x0014 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SS0_B                            0x0014 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SCLK_B                           0x0014 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD5__EPDC0_D0                                    0x0014 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD5__DPI0_D0                                     0x0014 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD5__LP_APD_DBG_MUX_5                            0x0014 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD5__DEBUG_MUX0_5                                0x0014 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD5__DEBUG_MUX1_5                                0x0014 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD6__PTD6                                        0x0018 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD6__SDHC0_WP                                    0x0018 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD6__TPM8_CH3                                    0x0018 0x0B24 0x6 0x1
+#define MX8ULP_PAD_PTD6__I2S6_TX_FS                                  0x0018 0x0B50 0x7 0x1
+#define MX8ULP_PAD_PTD6__SDHC0_D4                                    0x0018 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD6__FLEXSPI2_B_SCLK                             0x0018 0x0978 0x9 0x1
+#define MX8ULP_PAD_PTD6__EPDC0_D1                                    0x0018 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD6__DPI0_D1                                     0x0018 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD6__LP_APD_DBG_MUX_6                            0x0018 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD6__DEBUG_MUX0_6                                0x0018 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD6__DEBUG_MUX1_6                                0x0018 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD7__PTD7                                        0x001C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD7__TPM8_CH2                                    0x001C 0x0B20 0x6 0x1
+#define MX8ULP_PAD_PTD7__I2S6_TXD0                                   0x001C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD7__SDHC0_D3                                    0x001C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD7__FLEXSPI2_B_DATA3                            0x001C 0x0960 0x9 0x1
+#define MX8ULP_PAD_PTD7__EPDC0_D2                                    0x001C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD7__DPI0_D2                                     0x001C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD7__LP_APD_DBG_MUX_7                            0x001C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD7__DEBUG_MUX0_7                                0x001C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD7__DEBUG_MUX1_7                                0x001C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD8__PTD8                                        0x0020 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD8__TPM8_CH1                                    0x0020 0x0B1C 0x6 0x1
+#define MX8ULP_PAD_PTD8__I2S6_TXD1                                   0x0020 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD8__SDHC0_D2                                    0x0020 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD8__FLEXSPI2_B_DATA2                            0x0020 0x095C 0x9 0x1
+#define MX8ULP_PAD_PTD8__EPDC0_D3                                    0x0020 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD8__DPI0_D3                                     0x0020 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD8__LP_APD_DBG_MUX_8                            0x0020 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD8__DEBUG_MUX1_8                                0x0020 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD9__PTD9                                        0x0024 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD9__TPM8_CLKIN                                  0x0024 0x0B30 0x6 0x1
+#define MX8ULP_PAD_PTD9__I2S6_TXD2                                   0x0024 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD9__SDHC0_D1                                    0x0024 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD9__FLEXSPI2_B_DATA1                            0x0024 0x0958 0x9 0x1
+#define MX8ULP_PAD_PTD9__EPDC0_D4                                    0x0024 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD9__DPI0_D4                                     0x0024 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD9__LP_APD_DBG_MUX_9                            0x0024 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD9__DEBUG_MUX1_9                                0x0024 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD10__PTD10                                      0x0028 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD10__TPM8_CH0                                   0x0028 0x0B18 0x6 0x1
+#define MX8ULP_PAD_PTD10__I2S6_TXD3                                  0x0028 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD10__SDHC0_D0                                   0x0028 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD10__FLEXSPI2_B_DATA0                           0x0028 0x0954 0x9 0x1
+#define MX8ULP_PAD_PTD10__EPDC0_D5                                   0x0028 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD10__DPI0_D5                                    0x0028 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD10__LP_APD_DBG_MUX_10                          0x0028 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTD10__DEBUG_MUX1_10                              0x0028 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD11__PTD11                                      0x002C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD11__TPM8_CH5                                   0x002C 0x0B2C 0x6 0x2
+#define MX8ULP_PAD_PTD11__I2S6_RXD2                                  0x002C 0x0B3C 0x7 0x1
+#define MX8ULP_PAD_PTD11__SDHC0_DQS                                  0x002C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD11__FLEXSPI2_B_SS0_B                           0x002C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD11__FLEXSPI2_A_SS1_B                           0x002C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD11__EPDC0_D6                                   0x002C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD11__DPI0_D6                                    0x002C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD11__LP_APD_DBG_MUX_11                          0x002C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD12__PTD12                                      0x0030 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD12__USB0_ID                                    0x0030 0x0AC8 0x5 0x1
+#define MX8ULP_PAD_PTD12__SDHC2_D3                                   0x0030 0x0AA4 0x6 0x1
+#define MX8ULP_PAD_PTD12__I2S7_RX_BCLK                               0x0030 0x0B64 0x7 0x1
+#define MX8ULP_PAD_PTD12__SDHC1_DQS                                  0x0030 0x0A84 0x8 0x1
+#define MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B                           0x0030 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD12__FLEXSPI2_B_SS1_B                           0x0030 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD12__EPDC0_D7                                   0x0030 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD12__DPI0_D7                                    0x0030 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD12__LP_APD_DBG_MUX_12                          0x0030 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD13__PTD13                                      0x0034 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD13__SPDIF_IN3                                  0x0034 0x0B80 0x4 0x1
+#define MX8ULP_PAD_PTD13__USB0_PWR                                   0x0034 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD13__SDHC2_D2                                   0x0034 0x0AA0 0x6 0x1
+#define MX8ULP_PAD_PTD13__I2S7_RX_FS                                 0x0034 0x0B68 0x7 0x1
+#define MX8ULP_PAD_PTD13__SDHC1_RESET_B                              0x0034 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK                            0x0034 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD13__CLKOUT2                                    0x0034 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD13__EPDC0_D8                                   0x0034 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD13__DPI0_D8                                    0x0034 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD13__CLKOUT1                                    0x0034 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD13__LP_APD_DBG_MUX_13                          0x0034 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD14__PTD14                                      0x0038 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD14__SPDIF_OUT3                                 0x0038 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD14__USB0_OC                                    0x0038 0x0AC0 0x5 0x1
+#define MX8ULP_PAD_PTD14__SDHC2_D1                                   0x0038 0x0A9C 0x6 0x1
+#define MX8ULP_PAD_PTD14__I2S7_RXD0                                  0x0038 0x0B54 0x7 0x1
+#define MX8ULP_PAD_PTD14__SDHC1_D7                                   0x0038 0x0A80 0x8 0x1
+#define MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3                           0x0038 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD14__TRACE0_D7                                  0x0038 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD14__EPDC0_D9                                   0x0038 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD14__DPI0_D9                                    0x0038 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD14__LP_APD_DBG_MUX_14                          0x0038 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD15__PTD15                                      0x003C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD15__SPDIF_IN2                                  0x003C 0x0B7C 0x4 0x1
+#define MX8ULP_PAD_PTD15__SDHC1_VS                                   0x003C 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD15__SDHC2_D0                                   0x003C 0x0A98 0x6 0x1
+#define MX8ULP_PAD_PTD15__I2S7_TX_BCLK                               0x003C 0x0B6C 0x7 0x1
+#define MX8ULP_PAD_PTD15__SDHC1_D6                                   0x003C 0x0A7C 0x8 0x1
+#define MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2                           0x003C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD15__TRACE0_D6                                  0x003C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD15__EPDC0_D10                                  0x003C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD15__DPI0_D10                                   0x003C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD15__LP_APD_DBG_MUX_15                          0x003C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD16__PTD16                                      0x0040 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD16__FXIO1_D31                                  0x0040 0x08A0 0x2 0x1
+#define MX8ULP_PAD_PTD16__LPSPI4_PCS1                                0x0040 0x08F8 0x3 0x1
+#define MX8ULP_PAD_PTD16__SPDIF_OUT2                                 0x0040 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD16__SDHC1_CD                                   0x0040 0x0A58 0x5 0x1
+#define MX8ULP_PAD_PTD16__SDHC2_CLK                                  0x0040 0x0A90 0x6 0x1
+#define MX8ULP_PAD_PTD16__I2S7_TX_FS                                 0x0040 0x0B70 0x7 0x1
+#define MX8ULP_PAD_PTD16__SDHC1_D5                                   0x0040 0x0A78 0x8 0x1
+#define MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1                           0x0040 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD16__TRACE0_D5                                  0x0040 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD16__EPDC0_D11                                  0x0040 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD16__DPI0_D11                                   0x0040 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD16__LP_APD_DBG_MUX_16                          0x0040 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD17__PTD17                                      0x0044 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD17__FXIO1_D30                                  0x0044 0x089C 0x2 0x1
+#define MX8ULP_PAD_PTD17__LPSPI4_PCS2                                0x0044 0x08FC 0x3 0x1
+#define MX8ULP_PAD_PTD17__EXT_AUD_MCLK3                              0x0044 0x0B14 0x4 0x2
+#define MX8ULP_PAD_PTD17__SDHC1_WP                                   0x0044 0x0A88 0x5 0x1
+#define MX8ULP_PAD_PTD17__SDHC2_CMD                                  0x0044 0x0A94 0x6 0x1
+#define MX8ULP_PAD_PTD17__I2S7_TXD0                                  0x0044 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD17__SDHC1_D4                                   0x0044 0x0A74 0x8 0x1
+#define MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0                           0x0044 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD17__TRACE0_D4                                  0x0044 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD17__EPDC0_D12                                  0x0044 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD17__DPI0_D12                                   0x0044 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD17__LP_APD_DBG_MUX_17                          0x0044 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD18__PTD18                                      0x0048 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD18__FXIO1_D29                                  0x0048 0x0894 0x2 0x1
+#define MX8ULP_PAD_PTD18__LPSPI4_PCS3                                0x0048 0x0900 0x3 0x1
+#define MX8ULP_PAD_PTD18__SPDIF_CLK                                  0x0048 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD18__EXT_AUD_MCLK3                              0x0048 0x0B14 0x5 0x3
+#define MX8ULP_PAD_PTD18__TPM8_CH0                                   0x0048 0x0B18 0x6 0x2
+#define MX8ULP_PAD_PTD18__I2S7_MCLK                                  0x0048 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD18__SDHC1_D3                                   0x0048 0x0A70 0x8 0x1
+#define MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS                             0x0048 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD18__TRACE0_D3                                  0x0048 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD18__EPDC0_D13                                  0x0048 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD18__DPI0_D13                                   0x0048 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD18__LP_APD_DBG_MUX_18                          0x0048 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD19__PTD19                                      0x004C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD19__FXIO1_D28                                  0x004C 0x0890 0x2 0x1
+#define MX8ULP_PAD_PTD19__SPDIF_IN0                                  0x004C 0x0B74 0x4 0x1
+#define MX8ULP_PAD_PTD19__TPM8_CH1                                   0x004C 0x0B1C 0x6 0x2
+#define MX8ULP_PAD_PTD19__I2S6_RXD3                                  0x004C 0x0B40 0x7 0x1
+#define MX8ULP_PAD_PTD19__SDHC1_D2                                   0x004C 0x0A6C 0x8 0x1
+#define MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7                           0x004C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD19__TRACE0_D2                                  0x004C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD19__EPDC0_D14                                  0x004C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD19__DPI0_D14                                   0x004C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD19__LP_APD_DBG_MUX_19                          0x004C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD20__PTD20                                      0x0050 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD20__FXIO1_D27                                  0x0050 0x088C 0x2 0x1
+#define MX8ULP_PAD_PTD20__LPSPI4_SIN                                 0x0050 0x0908 0x3 0x1
+#define MX8ULP_PAD_PTD20__SPDIF_OUT0                                 0x0050 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD20__TPM8_CLKIN                                 0x0050 0x0B30 0x6 0x2
+#define MX8ULP_PAD_PTD20__I2S7_RXD1                                  0x0050 0x0B58 0x7 0x1
+#define MX8ULP_PAD_PTD20__SDHC1_D1                                   0x0050 0x0A68 0x8 0x1
+#define MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6                           0x0050 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD20__TRACE0_D1                                  0x0050 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD20__EPDC0_D15                                  0x0050 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTD20__DPI0_D15                                   0x0050 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD20__LP_APD_DBG_MUX_20                          0x0050 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD21__PTD21                                      0x0054 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD21__FXIO1_D26                                  0x0054 0x0888 0x2 0x1
+#define MX8ULP_PAD_PTD21__LPSPI4_SOUT                                0x0054 0x090C 0x3 0x1
+#define MX8ULP_PAD_PTD21__SPDIF_IN1                                  0x0054 0x0B78 0x4 0x1
+#define MX8ULP_PAD_PTD21__USB1_PWR                                   0x0054 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTD21__TPM8_CH2                                   0x0054 0x0B20 0x6 0x2
+#define MX8ULP_PAD_PTD21__I2S7_TXD1                                  0x0054 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD21__SDHC1_D0                                   0x0054 0x0A64 0x8 0x1
+#define MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5                           0x0054 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD21__TRACE0_D0                                  0x0054 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD21__DPI0_D16                                   0x0054 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD21__WDOG5_RST                                  0x0054 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTD21__LP_APD_DBG_MUX_21                          0x0054 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD22__PTD22                                      0x0058 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD22__FXIO1_D25                                  0x0058 0x0884 0x2 0x1
+#define MX8ULP_PAD_PTD22__LPSPI4_SCK                                 0x0058 0x0904 0x3 0x1
+#define MX8ULP_PAD_PTD22__SPDIF_OUT1                                 0x0058 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTD22__USB1_OC                                    0x0058 0x0AC4 0x5 0x1
+#define MX8ULP_PAD_PTD22__TPM8_CH3                                   0x0058 0x0B24 0x6 0x2
+#define MX8ULP_PAD_PTD22__I2S7_TXD2                                  0x0058 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD22__SDHC1_CLK                                  0x0058 0x0A5C 0x8 0x1
+#define MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4                           0x0058 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD22__TRACE0_CLKOUT                              0x0058 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD22__DPI0_D17                                   0x0058 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD22__LP_APD_DBG_MUX_22                          0x0058 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTD23__PTD23                                      0x005C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTD23__FXIO1_D24                                  0x005C 0x0880 0x2 0x1
+#define MX8ULP_PAD_PTD23__LPSPI4_PCS0                                0x005C 0x08F4 0x3 0x1
+#define MX8ULP_PAD_PTD23__USB1_ID                                    0x005C 0x0ACC 0x5 0x1
+#define MX8ULP_PAD_PTD23__TPM8_CH4                                   0x005C 0x0B28 0x6 0x2
+#define MX8ULP_PAD_PTD23__I2S7_TXD3                                  0x005C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTD23__SDHC1_CMD                                  0x005C 0x0A60 0x8 0x1
+#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SS0_B                           0x005C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SCLK_B                          0x005C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTD23__DPI0_D18                                   0x005C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTD23__LP_APD_DBG_MUX_23                          0x005C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE0__PTE0                                        0x0080 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE0__FXIO1_D23                                   0x0080 0x087C 0x2 0x1
+#define MX8ULP_PAD_PTE0__SPDIF_IN3                                   0x0080 0x0B80 0x3 0x2
+#define MX8ULP_PAD_PTE0__LPUART4_CTS_B                               0x0080 0x08DC 0x4 0x1
+#define MX8ULP_PAD_PTE0__LPI2C4_SCL                                  0x0080 0x08C8 0x5 0x1
+#define MX8ULP_PAD_PTE0__TPM8_CLKIN                                  0x0080 0x0B30 0x6 0x3
+#define MX8ULP_PAD_PTE0__I2S7_RXD2                                   0x0080 0x0B5C 0x7 0x1
+#define MX8ULP_PAD_PTE0__SDHC2_D1                                    0x0080 0x0A9C 0x8 0x2
+#define MX8ULP_PAD_PTE0__FLEXSPI2_B_DQS                              0x0080 0x0974 0x9 0x2
+#define MX8ULP_PAD_PTE0__ENET0_CRS                                   0x0080 0x0AE8 0xa 0x1
+#define MX8ULP_PAD_PTE0__DBI0_WRX                                    0x0080 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE0__DPI0_D19                                    0x0080 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE0__WUU1_P0                                     0x0080 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE0__DEBUG_MUX0_8                                0x0080 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE0__DEBUG_MUX1_11                               0x0080 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE1__PTE1                                        0x0084 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE1__FXIO1_D22                                   0x0084 0x0878 0x2 0x1
+#define MX8ULP_PAD_PTE1__SPDIF_OUT3                                  0x0084 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE1__LPUART4_RTS_B                               0x0084 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE1__LPI2C4_SDA                                  0x0084 0x08CC 0x5 0x1
+#define MX8ULP_PAD_PTE1__TPM8_CH0                                    0x0084 0x0B18 0x6 0x3
+#define MX8ULP_PAD_PTE1__I2S7_RXD3                                   0x0084 0x0B60 0x7 0x1
+#define MX8ULP_PAD_PTE1__SDHC2_D0                                    0x0084 0x0A98 0x8 0x2
+#define MX8ULP_PAD_PTE1__FLEXSPI2_B_DATA7                            0x0084 0x0970 0x9 0x2
+#define MX8ULP_PAD_PTE1__ENET0_COL                                   0x0084 0x0AE4 0xa 0x1
+#define MX8ULP_PAD_PTE1__DBI0_CSX                                    0x0084 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE1__DPI0_D20                                    0x0084 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE1__WUU1_P1                                     0x0084 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE1__DEBUG_MUX0_9                                0x0084 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE1__DEBUG_MUX1_12                               0x0084 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE2__PTE2                                        0x0088 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE2__FXIO1_D21                                   0x0088 0x0874 0x2 0x1
+#define MX8ULP_PAD_PTE2__SPDIF_IN2                                   0x0088 0x0B7C 0x3 0x2
+#define MX8ULP_PAD_PTE2__LPUART4_TX                                  0x0088 0x08E4 0x4 0x1
+#define MX8ULP_PAD_PTE2__LPI2C4_HREQ                                 0x0088 0x08C4 0x5 0x1
+#define MX8ULP_PAD_PTE2__TPM8_CH1                                    0x0088 0x0B1C 0x6 0x3
+#define MX8ULP_PAD_PTE2__EXT_AUD_MCLK3                               0x0088 0x0B14 0x7 0x4
+#define MX8ULP_PAD_PTE2__SDHC2_CLK                                   0x0088 0x0A90 0x8 0x2
+#define MX8ULP_PAD_PTE2__FLEXSPI2_B_DATA6                            0x0088 0x096C 0x9 0x2
+#define MX8ULP_PAD_PTE2__ENET0_TXER                                  0x0088 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE2__DBI0_DCX                                    0x0088 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE2__DPI0_D21                                    0x0088 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE2__LP_HV_DBG_MUX_0                             0x0088 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE2__DEBUG_MUX0_10                               0x0088 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE2__DEBUG_MUX1_13                               0x0088 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE3__PTE3                                        0x008C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE3__FXIO1_D20                                   0x008C 0x0870 0x2 0x1
+#define MX8ULP_PAD_PTE3__SPDIF_OUT2                                  0x008C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE3__LPUART4_RX                                  0x008C 0x08E0 0x4 0x1
+#define MX8ULP_PAD_PTE3__TPM8_CH2                                    0x008C 0x0B20 0x6 0x3
+#define MX8ULP_PAD_PTE3__I2S6_MCLK                                   0x008C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE3__SDHC2_CMD                                   0x008C 0x0A94 0x8 0x2
+#define MX8ULP_PAD_PTE3__FLEXSPI2_B_DATA5                            0x008C 0x0968 0x9 0x2
+#define MX8ULP_PAD_PTE3__ENET0_TXCLK                                 0x008C 0x0B10 0xa 0x1
+#define MX8ULP_PAD_PTE3__DBI0_RWX                                    0x008C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE3__DPI0_D22                                    0x008C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE3__WUU1_P2                                     0x008C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE3__DEBUG_MUX0_11                               0x008C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE3__DEBUG_MUX1_14                               0x008C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE4__PTE4                                        0x0090 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE4__FXIO1_D19                                   0x0090 0x0868 0x2 0x1
+#define MX8ULP_PAD_PTE4__SPDIF_CLK                                   0x0090 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE4__LPUART5_CTS_B                               0x0090 0x08E8 0x4 0x1
+#define MX8ULP_PAD_PTE4__LPI2C5_SCL                                  0x0090 0x08D4 0x5 0x1
+#define MX8ULP_PAD_PTE4__TPM8_CH3                                    0x0090 0x0B24 0x6 0x3
+#define MX8ULP_PAD_PTE4__I2S6_RX_BCLK                                0x0090 0x0B44 0x7 0x2
+#define MX8ULP_PAD_PTE4__SDHC2_D3                                    0x0090 0x0AA4 0x8 0x2
+#define MX8ULP_PAD_PTE4__FLEXSPI2_B_DATA4                            0x0090 0x0964 0x9 0x2
+#define MX8ULP_PAD_PTE4__ENET0_TXD3                                  0x0090 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE4__DBI0_E                                      0x0090 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE4__DPI0_D23                                    0x0090 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE4__WUU1_P3                                     0x0090 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE4__DEBUG_MUX0_12                               0x0090 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE4__DEBUG_MUX1_15                               0x0090 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE5__PTE5                                        0x0094 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE5__FXIO1_D18                                   0x0094 0x0864 0x2 0x1
+#define MX8ULP_PAD_PTE5__SPDIF_IN0                                   0x0094 0x0B74 0x3 0x2
+#define MX8ULP_PAD_PTE5__LPUART5_RTS_B                               0x0094 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE5__LPI2C5_SDA                                  0x0094 0x08D8 0x5 0x1
+#define MX8ULP_PAD_PTE5__TPM8_CH4                                    0x0094 0x0B28 0x6 0x3
+#define MX8ULP_PAD_PTE5__I2S6_RX_FS                                  0x0094 0x0B48 0x7 0x2
+#define MX8ULP_PAD_PTE5__SDHC2_D2                                    0x0094 0x0AA0 0x8 0x2
+#define MX8ULP_PAD_PTE5__FLEXSPI2_B_SS0_B                            0x0094 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE5__ENET0_TXD2                                  0x0094 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE5__DBI0_D0                                     0x0094 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE5__LP_HV_DBG_MUX_1                             0x0094 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE5__DEBUG_MUX0_13                               0x0094 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE5__DEBUG_MUX1_16                               0x0094 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE6__PTE6                                        0x0098 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE6__FXIO1_D17                                   0x0098 0x0860 0x2 0x1
+#define MX8ULP_PAD_PTE6__SPDIF_OUT0                                  0x0098 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE6__LPUART5_TX                                  0x0098 0x08F0 0x4 0x1
+#define MX8ULP_PAD_PTE6__LPI2C5_HREQ                                 0x0098 0x08D0 0x5 0x1
+#define MX8ULP_PAD_PTE6__TPM8_CH5                                    0x0098 0x0B2C 0x6 0x3
+#define MX8ULP_PAD_PTE6__I2S6_RXD0                                   0x0098 0x0B34 0x7 0x2
+#define MX8ULP_PAD_PTE6__SDHC2_D4                                    0x0098 0x0AA8 0x8 0x1
+#define MX8ULP_PAD_PTE6__FLEXSPI2_B_SCLK                             0x0098 0x0978 0x9 0x2
+#define MX8ULP_PAD_PTE6__ENET0_RXCLK                                 0x0098 0x0B0C 0xa 0x1
+#define MX8ULP_PAD_PTE6__DBI0_D1                                     0x0098 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE6__LP_HV_DBG_MUX_2                             0x0098 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE6__WDOG5_RST                                   0x0098 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE6__DEBUG_MUX0_14                               0x0098 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE6__DEBUG_MUX1_17                               0x0098 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE7__PTE7                                        0x009C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE7__FXIO1_D16                                   0x009C 0x085C 0x2 0x1
+#define MX8ULP_PAD_PTE7__SPDIF_IN1                                   0x009C 0x0B78 0x3 0x2
+#define MX8ULP_PAD_PTE7__LPUART5_RX                                  0x009C 0x08EC 0x4 0x1
+#define MX8ULP_PAD_PTE7__LPI2C6_HREQ                                 0x009C 0x09B4 0x5 0x1
+#define MX8ULP_PAD_PTE7__TPM4_CLKIN                                  0x009C 0x081C 0x6 0x1
+#define MX8ULP_PAD_PTE7__I2S6_RXD1                                   0x009C 0x0B38 0x7 0x2
+#define MX8ULP_PAD_PTE7__SDHC2_D5                                    0x009C 0x0AAC 0x8 0x1
+#define MX8ULP_PAD_PTE7__FLEXSPI2_B_DATA3                            0x009C 0x0960 0x9 0x2
+#define MX8ULP_PAD_PTE7__ENET0_RXD3                                  0x009C 0x0B04 0xa 0x1
+#define MX8ULP_PAD_PTE7__DBI0_D2                                     0x009C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE7__EPDC0_BDR1                                  0x009C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE7__WUU1_P4                                     0x009C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE7__DEBUG_MUX0_15                               0x009C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE7__DEBUG_MUX1_18                               0x009C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE8__PTE8                                        0x00A0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE8__FXIO1_D15                                   0x00A0 0x0858 0x2 0x1
+#define MX8ULP_PAD_PTE8__LPSPI4_PCS1                                 0x00A0 0x08F8 0x3 0x2
+#define MX8ULP_PAD_PTE8__LPUART6_CTS_B                               0x00A0 0x09CC 0x4 0x1
+#define MX8ULP_PAD_PTE8__LPI2C6_SCL                                  0x00A0 0x09B8 0x5 0x1
+#define MX8ULP_PAD_PTE8__TPM4_CH0                                    0x00A0 0x0804 0x6 0x1
+#define MX8ULP_PAD_PTE8__I2S6_RXD2                                   0x00A0 0x0B3C 0x7 0x2
+#define MX8ULP_PAD_PTE8__SDHC2_D6                                    0x00A0 0x0AB0 0x8 0x1
+#define MX8ULP_PAD_PTE8__FLEXSPI2_B_DATA2                            0x00A0 0x095C 0x9 0x2
+#define MX8ULP_PAD_PTE8__ENET0_RXD2                                  0x00A0 0x0B00 0xa 0x1
+#define MX8ULP_PAD_PTE8__DBI0_D3                                     0x00A0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE8__EPDC0_BDR0                                  0x00A0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE8__LP_HV_DBG_MUX_3                             0x00A0 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE8__DEBUG_MUX1_19                               0x00A0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE9__PTE9                                        0x00A4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE9__FXIO1_D14                                   0x00A4 0x0854 0x2 0x1
+#define MX8ULP_PAD_PTE9__LPSPI4_PCS2                                 0x00A4 0x08FC 0x3 0x2
+#define MX8ULP_PAD_PTE9__LPUART6_RTS_B                               0x00A4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE9__LPI2C6_SDA                                  0x00A4 0x09BC 0x5 0x1
+#define MX8ULP_PAD_PTE9__TPM4_CH1                                    0x00A4 0x0808 0x6 0x1
+#define MX8ULP_PAD_PTE9__I2S6_RXD3                                   0x00A4 0x0B40 0x7 0x2
+#define MX8ULP_PAD_PTE9__SDHC2_D7                                    0x00A4 0x0AB4 0x8 0x1
+#define MX8ULP_PAD_PTE9__FLEXSPI2_B_DATA1                            0x00A4 0x0958 0x9 0x2
+#define MX8ULP_PAD_PTE9__ENET0_1588_TMR3                             0x00A4 0x0AE0 0xa 0x1
+#define MX8ULP_PAD_PTE9__DBI0_D4                                     0x00A4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE9__EPDC0_VCOM1                                 0x00A4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE9__LP_HV_DBG_MUX_4                             0x00A4 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE9__DEBUG_MUX1_20                               0x00A4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE10__PTE10                                      0x00A8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE10__FXIO1_D13                                  0x00A8 0x0850 0x2 0x1
+#define MX8ULP_PAD_PTE10__LPSPI4_PCS3                                0x00A8 0x0900 0x3 0x2
+#define MX8ULP_PAD_PTE10__LPUART6_TX                                 0x00A8 0x09D4 0x4 0x1
+#define MX8ULP_PAD_PTE10__I3C2_SCL                                   0x00A8 0x08BC 0x5 0x1
+#define MX8ULP_PAD_PTE10__TPM4_CH2                                   0x00A8 0x080C 0x6 0x1
+#define MX8ULP_PAD_PTE10__I2S6_TX_BCLK                               0x00A8 0x0B4C 0x7 0x2
+#define MX8ULP_PAD_PTE10__SDHC2_DQS                                  0x00A8 0x0AB8 0x8 0x1
+#define MX8ULP_PAD_PTE10__FLEXSPI2_B_DATA0                           0x00A8 0x0954 0x9 0x2
+#define MX8ULP_PAD_PTE10__ENET0_1588_TMR2                            0x00A8 0x0ADC 0xa 0x1
+#define MX8ULP_PAD_PTE10__DBI0_D5                                    0x00A8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE10__EPDC0_VCOM0                                0x00A8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE10__LP_HV_DBG_MUX_5                            0x00A8 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTE10__DEBUG_MUX1_21                              0x00A8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE11__PTE11                                      0x00AC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE11__FXIO1_D12                                  0x00AC 0x084C 0x2 0x1
+#define MX8ULP_PAD_PTE11__SPDIF_OUT1                                 0x00AC 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTE11__LPUART6_RX                                 0x00AC 0x09D0 0x4 0x1
+#define MX8ULP_PAD_PTE11__I3C2_SDA                                   0x00AC 0x08C0 0x5 0x1
+#define MX8ULP_PAD_PTE11__TPM4_CH3                                   0x00AC 0x0810 0x6 0x1
+#define MX8ULP_PAD_PTE11__I2S6_TX_FS                                 0x00AC 0x0B50 0x7 0x2
+#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SCLK_B                          0x00AC 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SS0_B                           0x00AC 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE11__ENET0_1588_TMR1                            0x00AC 0x0AD8 0xa 0x1
+#define MX8ULP_PAD_PTE11__DBI0_D6                                    0x00AC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE11__EPDC0_PWRCTRL0                             0x00AC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE11__LP_HV_DBG_MUX_6                            0x00AC 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE12__PTE12                                      0x00B0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE12__FXIO1_D11                                  0x00B0 0x0848 0x2 0x1
+#define MX8ULP_PAD_PTE12__LPSPI4_SIN                                 0x00B0 0x0908 0x3 0x2
+#define MX8ULP_PAD_PTE12__LPUART7_CTS_B                              0x00B0 0x09D8 0x4 0x1
+#define MX8ULP_PAD_PTE12__LPI2C7_SCL                                 0x00B0 0x09C4 0x5 0x1
+#define MX8ULP_PAD_PTE12__TPM4_CH4                                   0x00B0 0x0814 0x6 0x1
+#define MX8ULP_PAD_PTE12__I2S6_TXD0                                  0x00B0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE12__SDHC2_RESET_B                              0x00B0 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE12__FLEXSPI2_B_SS1_B                           0x00B0 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE12__ENET0_1588_TMR0                            0x00B0 0x0AD4 0xa 0x1
+#define MX8ULP_PAD_PTE12__DBI0_D7                                    0x00B0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE12__EPDC0_PWRCTRL1                             0x00B0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE12__WUU1_P5                                    0x00B0 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE13__PTE13                                      0x00B4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE13__FXIO1_D10                                  0x00B4 0x0844 0x2 0x1
+#define MX8ULP_PAD_PTE13__LPSPI4_SOUT                                0x00B4 0x090C 0x3 0x2
+#define MX8ULP_PAD_PTE13__LPUART7_RTS_B                              0x00B4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE13__LPI2C7_SDA                                 0x00B4 0x09C8 0x5 0x1
+#define MX8ULP_PAD_PTE13__TPM4_CH5                                   0x00B4 0x0818 0x6 0x1
+#define MX8ULP_PAD_PTE13__I2S6_TXD1                                  0x00B4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE13__SDHC1_WP                                   0x00B4 0x0A88 0x8 0x2
+#define MX8ULP_PAD_PTE13__ENET0_1588_CLKIN                           0x00B4 0x0AD0 0xa 0x1
+#define MX8ULP_PAD_PTE13__DBI0_D8                                    0x00B4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE13__EPDC0_PWRCTRL2                             0x00B4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE13__LP_HV_DBG_MUX_7                            0x00B4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE14__PTE14                                      0x00B8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE14__FXIO1_D9                                   0x00B8 0x08B8 0x2 0x1
+#define MX8ULP_PAD_PTE14__LPSPI4_SCK                                 0x00B8 0x0904 0x3 0x2
+#define MX8ULP_PAD_PTE14__LPUART7_TX                                 0x00B8 0x09E0 0x4 0x1
+#define MX8ULP_PAD_PTE14__LPI2C7_HREQ                                0x00B8 0x09C0 0x5 0x1
+#define MX8ULP_PAD_PTE14__TPM5_CLKIN                                 0x00B8 0x0838 0x6 0x1
+#define MX8ULP_PAD_PTE14__I2S6_TXD2                                  0x00B8 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE14__SDHC1_CD                                   0x00B8 0x0A58 0x8 0x2
+#define MX8ULP_PAD_PTE14__ENET0_MDIO                                 0x00B8 0x0AF0 0xa 0x1
+#define MX8ULP_PAD_PTE14__DBI0_D9                                    0x00B8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE14__EPDC0_PWRCTRL3                             0x00B8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE14__LP_HV_DBG_MUX_8                            0x00B8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE15__PTE15                                      0x00BC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE15__FXIO1_D8                                   0x00BC 0x08B4 0x2 0x1
+#define MX8ULP_PAD_PTE15__LPSPI4_PCS0                                0x00BC 0x08F4 0x3 0x2
+#define MX8ULP_PAD_PTE15__LPUART7_RX                                 0x00BC 0x09DC 0x4 0x1
+#define MX8ULP_PAD_PTE15__I3C2_PUR                                   0x00BC 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTE15__TPM5_CH0                                   0x00BC 0x0820 0x6 0x1
+#define MX8ULP_PAD_PTE15__I2S6_TXD3                                  0x00BC 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE15__MQS1_LEFT                                  0x00BC 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE15__ENET0_MDC                                  0x00BC 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE15__DBI0_D10                                   0x00BC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE15__EPDC0_PWRCOM                               0x00BC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE15__WUU1_P6                                    0x00BC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE16__PTE16                                      0x00C0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE16__FXIO1_D7                                   0x00C0 0x08B0 0x2 0x1
+#define MX8ULP_PAD_PTE16__LPSPI5_PCS1                                0x00C0 0x0914 0x3 0x1
+#define MX8ULP_PAD_PTE16__LPUART4_CTS_B                              0x00C0 0x08DC 0x4 0x2
+#define MX8ULP_PAD_PTE16__LPI2C4_SCL                                 0x00C0 0x08C8 0x5 0x2
+#define MX8ULP_PAD_PTE16__TPM5_CH1                                   0x00C0 0x0824 0x6 0x1
+#define MX8ULP_PAD_PTE16__MQS1_LEFT                                  0x00C0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE16__MQS1_RIGHT                                 0x00C0 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE16__USB0_ID                                    0x00C0 0x0AC8 0x9 0x2
+#define MX8ULP_PAD_PTE16__ENET0_TXEN                                 0x00C0 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE16__DBI0_D11                                   0x00C0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE16__EPDC0_PWRIRQ                               0x00C0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE16__WDOG3_RST                                  0x00C0 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE16__LP_HV_DBG_MUX_9                            0x00C0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE17__PTE17                                      0x00C4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE17__FXIO1_D6                                   0x00C4 0x08AC 0x2 0x1
+#define MX8ULP_PAD_PTE17__LPSPI5_PCS2                                0x00C4 0x0918 0x3 0x1
+#define MX8ULP_PAD_PTE17__LPUART4_RTS_B                              0x00C4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE17__LPI2C4_SDA                                 0x00C4 0x08CC 0x5 0x2
+#define MX8ULP_PAD_PTE17__MQS1_RIGHT                                 0x00C4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE17__SDHC1_VS                                   0x00C4 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTE17__USB0_PWR                                   0x00C4 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE17__ENET0_RXER                                 0x00C4 0x0B08 0xa 0x1
+#define MX8ULP_PAD_PTE17__DBI0_D12                                   0x00C4 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE17__EPDC0_PWRSTAT                              0x00C4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE17__LP_HV_DBG_MUX_10                           0x00C4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE18__PTE18                                      0x00C8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE18__FXIO1_D5                                   0x00C8 0x08A8 0x2 0x1
+#define MX8ULP_PAD_PTE18__LPSPI5_PCS3                                0x00C8 0x091C 0x3 0x1
+#define MX8ULP_PAD_PTE18__LPUART4_TX                                 0x00C8 0x08E4 0x4 0x2
+#define MX8ULP_PAD_PTE18__LPI2C4_HREQ                                0x00C8 0x08C4 0x5 0x2
+#define MX8ULP_PAD_PTE18__I2S7_TX_BCLK                               0x00C8 0x0B6C 0x7 0x2
+#define MX8ULP_PAD_PTE18__USB0_OC                                    0x00C8 0x0AC0 0x9 0x2
+#define MX8ULP_PAD_PTE18__ENET0_CRS_DV                               0x00C8 0x0AEC 0xa 0x1
+#define MX8ULP_PAD_PTE18__DBI0_D13                                   0x00C8 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE18__EPDC0_PWRWAKE                              0x00C8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE18__LP_HV_DBG_MUX_11                           0x00C8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE19__PTE19                                      0x00CC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE19__FXIO1_D4                                   0x00CC 0x08A4 0x2 0x1
+#define MX8ULP_PAD_PTE19__LPUART4_RX                                 0x00CC 0x08E0 0x4 0x2
+#define MX8ULP_PAD_PTE19__LPI2C5_HREQ                                0x00CC 0x08D0 0x5 0x2
+#define MX8ULP_PAD_PTE19__I3C2_PUR                                   0x00CC 0x0000 0x6 0x0
+#define MX8ULP_PAD_PTE19__I2S7_TX_FS                                 0x00CC 0x0B70 0x7 0x2
+#define MX8ULP_PAD_PTE19__USB1_PWR                                   0x00CC 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTE19__ENET0_REFCLK                               0x00CC 0x0AF4 0xa 0x1
+#define MX8ULP_PAD_PTE19__DBI0_D14                                   0x00CC 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE19__EPDC0_GDCLK                                0x00CC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE19__WUU1_P7                                    0x00CC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE20__PTE20                                      0x00D0 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE20__FXIO1_D3                                   0x00D0 0x0898 0x2 0x1
+#define MX8ULP_PAD_PTE20__LPSPI5_SIN                                 0x00D0 0x0924 0x3 0x1
+#define MX8ULP_PAD_PTE20__LPUART5_CTS_B                              0x00D0 0x08E8 0x4 0x2
+#define MX8ULP_PAD_PTE20__LPI2C5_SCL                                 0x00D0 0x08D4 0x5 0x2
+#define MX8ULP_PAD_PTE20__I2S7_TXD0                                  0x00D0 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE20__USB1_OC                                    0x00D0 0x0AC4 0x9 0x2
+#define MX8ULP_PAD_PTE20__ENET0_RXD1                                 0x00D0 0x0AFC 0xa 0x1
+#define MX8ULP_PAD_PTE20__DBI0_D15                                   0x00D0 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTE20__EPDC0_GDOE                                 0x00D0 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE20__LP_HV_DBG_MUX_12                           0x00D0 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE21__PTE21                                      0x00D4 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE21__FXIO1_D2                                   0x00D4 0x086C 0x2 0x1
+#define MX8ULP_PAD_PTE21__LPSPI5_SOUT                                0x00D4 0x0928 0x3 0x1
+#define MX8ULP_PAD_PTE21__LPUART5_RTS_B                              0x00D4 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTE21__LPI2C5_SDA                                 0x00D4 0x08D8 0x5 0x2
+#define MX8ULP_PAD_PTE21__TPM6_CLKIN                                 0x00D4 0x0994 0x6 0x1
+#define MX8ULP_PAD_PTE21__I2S7_TXD1                                  0x00D4 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE21__USB1_ID                                    0x00D4 0x0ACC 0x9 0x2
+#define MX8ULP_PAD_PTE21__ENET0_RXD0                                 0x00D4 0x0AF8 0xa 0x1
+#define MX8ULP_PAD_PTE21__EPDC0_GDRL                                 0x00D4 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE21__WDOG4_RST                                  0x00D4 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE21__LP_HV_DBG_MUX_13                           0x00D4 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE22__PTE22                                      0x00D8 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE22__FXIO1_D1                                   0x00D8 0x0840 0x2 0x1
+#define MX8ULP_PAD_PTE22__LPSPI5_SCK                                 0x00D8 0x0920 0x3 0x1
+#define MX8ULP_PAD_PTE22__LPUART5_TX                                 0x00D8 0x08F0 0x4 0x2
+#define MX8ULP_PAD_PTE22__I3C2_SCL                                   0x00D8 0x08BC 0x5 0x2
+#define MX8ULP_PAD_PTE22__TPM6_CH0                                   0x00D8 0x097C 0x6 0x1
+#define MX8ULP_PAD_PTE22__I2S7_TXD2                                  0x00D8 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE22__EXT_AUD_MCLK3                              0x00D8 0x0B14 0x9 0x5
+#define MX8ULP_PAD_PTE22__ENET0_TXD1                                 0x00D8 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE22__EPDC0_SDOED                                0x00D8 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE22__CLKOUT2                                    0x00D8 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE22__LP_HV_DBG_MUX_14                           0x00D8 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTE23__PTE23                                      0x00DC 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTE23__FXIO1_D0                                   0x00DC 0x083C 0x2 0x1
+#define MX8ULP_PAD_PTE23__LPSPI5_PCS0                                0x00DC 0x0910 0x3 0x1
+#define MX8ULP_PAD_PTE23__LPUART5_RX                                 0x00DC 0x08EC 0x4 0x2
+#define MX8ULP_PAD_PTE23__I3C2_SDA                                   0x00DC 0x08C0 0x5 0x2
+#define MX8ULP_PAD_PTE23__TPM6_CH1                                   0x00DC 0x0980 0x6 0x1
+#define MX8ULP_PAD_PTE23__I2S7_TXD3                                  0x00DC 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTE23__EXT_AUD_MCLK2                              0x00DC 0x0800 0x9 0x1
+#define MX8ULP_PAD_PTE23__ENET0_TXD0                                 0x00DC 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTE23__EPDC0_SDOEZ                                0x00DC 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTE23__CLKOUT1                                    0x00DC 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTE23__LP_HV_DBG_MUX_15                           0x00DC 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF0__PTF0                                        0x0100 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF0__FXIO1_D0                                    0x0100 0x083C 0x2 0x2
+#define MX8ULP_PAD_PTF0__LPUART6_CTS_B                               0x0100 0x09CC 0x4 0x2
+#define MX8ULP_PAD_PTF0__LPI2C6_SCL                                  0x0100 0x09B8 0x5 0x2
+#define MX8ULP_PAD_PTF0__I2S7_RX_BCLK                                0x0100 0x0B64 0x7 0x2
+#define MX8ULP_PAD_PTF0__SDHC1_D1                                    0x0100 0x0A68 0x8 0x2
+#define MX8ULP_PAD_PTF0__ENET0_RXD1                                  0x0100 0x0AFC 0x9 0x2
+#define MX8ULP_PAD_PTF0__USB1_ID                                     0x0100 0x0ACC 0xa 0x3
+#define MX8ULP_PAD_PTF0__EPDC0_SDOE                                  0x0100 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF0__DPI0_D23                                    0x0100 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF0__WUU1_P8                                     0x0100 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF1__PTF1                                        0x0104 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF1__FXIO1_D1                                    0x0104 0x0840 0x2 0x2
+#define MX8ULP_PAD_PTF1__LPUART6_RTS_B                               0x0104 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF1__LPI2C6_SDA                                  0x0104 0x09BC 0x5 0x2
+#define MX8ULP_PAD_PTF1__I2S7_RX_FS                                  0x0104 0x0B68 0x7 0x2
+#define MX8ULP_PAD_PTF1__SDHC1_D0                                    0x0104 0x0A64 0x8 0x2
+#define MX8ULP_PAD_PTF1__ENET0_RXD0                                  0x0104 0x0AF8 0x9 0x2
+#define MX8ULP_PAD_PTF1__LP_HV_DBG_MUX_16                            0x0104 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF1__EPDC0_SDSHR                                 0x0104 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF1__DPI0_D22                                    0x0104 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF1__WDOG3_RST                                   0x0104 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF1__DEBUG_MUX0_16                               0x0104 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF1__DEBUG_MUX1_22                               0x0104 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF2__PTF2                                        0x0108 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF2__FXIO1_D2                                    0x0108 0x086C 0x2 0x2
+#define MX8ULP_PAD_PTF2__LPUART6_TX                                  0x0108 0x09D4 0x4 0x2
+#define MX8ULP_PAD_PTF2__LPI2C6_HREQ                                 0x0108 0x09B4 0x5 0x2
+#define MX8ULP_PAD_PTF2__I2S7_RXD0                                   0x0108 0x0B54 0x7 0x2
+#define MX8ULP_PAD_PTF2__SDHC1_CLK                                   0x0108 0x0A5C 0x8 0x2
+#define MX8ULP_PAD_PTF2__ENET0_TXD1                                  0x0108 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF2__USB0_ID                                     0x0108 0x0AC8 0xa 0x3
+#define MX8ULP_PAD_PTF2__EPDC0_SDCE9                                 0x0108 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF2__DPI0_D21                                    0x0108 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF2__LP_HV_DBG_MUX_17                            0x0108 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF2__DEBUG_MUX0_17                               0x0108 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF2__DEBUG_MUX1_23                               0x0108 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF3__PTF3                                        0x010C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF3__FXIO1_D3                                    0x010C 0x0898 0x2 0x2
+#define MX8ULP_PAD_PTF3__LPUART6_RX                                  0x010C 0x09D0 0x4 0x2
+#define MX8ULP_PAD_PTF3__LPI2C7_HREQ                                 0x010C 0x09C0 0x5 0x2
+#define MX8ULP_PAD_PTF3__I2S7_RXD1                                   0x010C 0x0B58 0x7 0x2
+#define MX8ULP_PAD_PTF3__SDHC1_CMD                                   0x010C 0x0A60 0x8 0x2
+#define MX8ULP_PAD_PTF3__ENET0_TXD0                                  0x010C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF3__USB0_PWR                                    0x010C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF3__EPDC0_SDCE8                                 0x010C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF3__DPI0_D20                                    0x010C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF3__WUU1_P9                                     0x010C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF3__DEBUG_MUX1_24                               0x010C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF4__PTF4                                        0x0110 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF4__FXIO1_D4                                    0x0110 0x08A4 0x2 0x2
+#define MX8ULP_PAD_PTF4__LPSPI4_PCS1                                 0x0110 0x08F8 0x3 0x3
+#define MX8ULP_PAD_PTF4__LPUART7_CTS_B                               0x0110 0x09D8 0x4 0x2
+#define MX8ULP_PAD_PTF4__LPI2C7_SCL                                  0x0110 0x09C4 0x5 0x2
+#define MX8ULP_PAD_PTF4__TPM7_CLKIN                                  0x0110 0x09B0 0x6 0x1
+#define MX8ULP_PAD_PTF4__I2S7_RXD2                                   0x0110 0x0B5C 0x7 0x2
+#define MX8ULP_PAD_PTF4__SDHC1_D3                                    0x0110 0x0A70 0x8 0x2
+#define MX8ULP_PAD_PTF4__ENET0_TXEN                                  0x0110 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF4__USB0_OC                                     0x0110 0x0AC0 0xa 0x3
+#define MX8ULP_PAD_PTF4__EPDC0_SDCE7                                 0x0110 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF4__DPI0_D19                                    0x0110 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF4__WUU1_P10                                    0x0110 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF4__DEBUG_MUX1_25                               0x0110 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF5__PTF5                                        0x0114 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF5__FXIO1_D5                                    0x0114 0x08A8 0x2 0x2
+#define MX8ULP_PAD_PTF5__LPSPI4_PCS2                                 0x0114 0x08FC 0x3 0x3
+#define MX8ULP_PAD_PTF5__LPUART7_RTS_B                               0x0114 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF5__LPI2C7_SDA                                  0x0114 0x09C8 0x5 0x2
+#define MX8ULP_PAD_PTF5__TPM7_CH0                                    0x0114 0x0998 0x6 0x1
+#define MX8ULP_PAD_PTF5__I2S7_RXD3                                   0x0114 0x0B60 0x7 0x2
+#define MX8ULP_PAD_PTF5__SDHC1_D2                                    0x0114 0x0A6C 0x8 0x2
+#define MX8ULP_PAD_PTF5__ENET0_RXER                                  0x0114 0x0B08 0x9 0x2
+#define MX8ULP_PAD_PTF5__USB1_PWR                                    0x0114 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF5__EPDC0_SDCE6                                 0x0114 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF5__DPI0_D18                                    0x0114 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF5__LP_HV_DBG_MUX_18                            0x0114 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF5__DEBUG_MUX0_18                               0x0114 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF5__DEBUG_MUX1_26                               0x0114 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF6__LP_HV_DBG_MUX_19                            0x0118 0x0000 0x0 0x0
+#define MX8ULP_PAD_PTF6__PTF6                                        0x0118 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF6__FXIO1_D6                                    0x0118 0x08AC 0x2 0x2
+#define MX8ULP_PAD_PTF6__LPSPI4_PCS3                                 0x0118 0x0900 0x3 0x3
+#define MX8ULP_PAD_PTF6__LPUART7_TX                                  0x0118 0x09E0 0x4 0x2
+#define MX8ULP_PAD_PTF6__I3C2_SCL                                    0x0118 0x08BC 0x5 0x3
+#define MX8ULP_PAD_PTF6__TPM7_CH1                                    0x0118 0x099C 0x6 0x1
+#define MX8ULP_PAD_PTF6__I2S7_MCLK                                   0x0118 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF6__SDHC1_D4                                    0x0118 0x0A74 0x8 0x2
+#define MX8ULP_PAD_PTF6__ENET0_CRS_DV                                0x0118 0x0AEC 0x9 0x2
+#define MX8ULP_PAD_PTF6__USB1_OC                                     0x0118 0x0AC4 0xa 0x3
+#define MX8ULP_PAD_PTF6__EPDC0_SDCE5                                 0x0118 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF6__DPI0_D17                                    0x0118 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF6__WDOG4_RST                                   0x0118 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF6__DEBUG_MUX0_19                               0x0118 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF6__DEBUG_MUX1_27                               0x0118 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF7__PTF7                                        0x011C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF7__FXIO1_D7                                    0x011C 0x08B0 0x2 0x2
+#define MX8ULP_PAD_PTF7__LPUART7_RX                                  0x011C 0x09DC 0x4 0x2
+#define MX8ULP_PAD_PTF7__I3C2_SDA                                    0x011C 0x08C0 0x5 0x3
+#define MX8ULP_PAD_PTF7__TPM7_CH2                                    0x011C 0x09A0 0x6 0x1
+#define MX8ULP_PAD_PTF7__MQS1_LEFT                                   0x011C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF7__SDHC1_D5                                    0x011C 0x0A78 0x8 0x2
+#define MX8ULP_PAD_PTF7__ENET0_REFCLK                                0x011C 0x0AF4 0x9 0x2
+#define MX8ULP_PAD_PTF7__TRACE0_D15                                  0x011C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF7__EPDC0_SDCE4                                 0x011C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF7__DPI0_D16                                    0x011C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF7__WUU1_P11                                    0x011C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF7__DEBUG_MUX1_28                               0x011C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF8__PTF8                                        0x0120 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF8__FXIO1_D8                                    0x0120 0x08B4 0x2 0x2
+#define MX8ULP_PAD_PTF8__LPSPI4_SIN                                  0x0120 0x0908 0x3 0x3
+#define MX8ULP_PAD_PTF8__LPUART4_CTS_B                               0x0120 0x08DC 0x4 0x3
+#define MX8ULP_PAD_PTF8__LPI2C4_SCL                                  0x0120 0x08C8 0x5 0x3
+#define MX8ULP_PAD_PTF8__TPM7_CH3                                    0x0120 0x09A4 0x6 0x1
+#define MX8ULP_PAD_PTF8__MQS1_RIGHT                                  0x0120 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF8__SDHC1_D6                                    0x0120 0x0A7C 0x8 0x2
+#define MX8ULP_PAD_PTF8__ENET0_MDIO                                  0x0120 0x0AF0 0x9 0x2
+#define MX8ULP_PAD_PTF8__TRACE0_D14                                  0x0120 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF8__EPDC0_D15                                   0x0120 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF8__DPI0_D15                                    0x0120 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF8__LP_HV_DBG_MUX_24                            0x0120 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF8__DEBUG_MUX1_29                               0x0120 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF9__PTF9                                        0x0124 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF9__FXIO1_D9                                    0x0124 0x08B8 0x2 0x2
+#define MX8ULP_PAD_PTF9__LPSPI4_SOUT                                 0x0124 0x090C 0x3 0x3
+#define MX8ULP_PAD_PTF9__LPUART4_RTS_B                               0x0124 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF9__LPI2C4_SDA                                  0x0124 0x08CC 0x5 0x3
+#define MX8ULP_PAD_PTF9__TPM7_CH4                                    0x0124 0x09A8 0x6 0x1
+#define MX8ULP_PAD_PTF9__EXT_AUD_MCLK2                               0x0124 0x0800 0x7 0x2
+#define MX8ULP_PAD_PTF9__SDHC1_D7                                    0x0124 0x0A80 0x8 0x2
+#define MX8ULP_PAD_PTF9__ENET0_MDC                                   0x0124 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF9__TRACE0_D13                                  0x0124 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF9__EPDC0_D14                                   0x0124 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF9__DPI0_D14                                    0x0124 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF9__LP_HV_DBG_MUX_25                            0x0124 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF9__DEBUG_MUX1_30                               0x0124 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF10__LP_HV_DBG_MUX_26                           0x0128 0x0000 0x0 0x0
+#define MX8ULP_PAD_PTF10__PTF10                                      0x0128 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF10__FXIO1_D10                                  0x0128 0x0844 0x2 0x2
+#define MX8ULP_PAD_PTF10__LPSPI4_SCK                                 0x0128 0x0904 0x3 0x3
+#define MX8ULP_PAD_PTF10__LPUART4_TX                                 0x0128 0x08E4 0x4 0x3
+#define MX8ULP_PAD_PTF10__LPI2C4_HREQ                                0x0128 0x08C4 0x5 0x3
+#define MX8ULP_PAD_PTF10__TPM7_CH5                                   0x0128 0x09AC 0x6 0x1
+#define MX8ULP_PAD_PTF10__I2S4_RX_BCLK                               0x0128 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF10__SDHC1_DQS                                  0x0128 0x0A84 0x8 0x2
+#define MX8ULP_PAD_PTF10__ENET0_1588_CLKIN                           0x0128 0x0AD0 0x9 0x2
+#define MX8ULP_PAD_PTF10__TRACE0_D12                                 0x0128 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF10__EPDC0_D13                                  0x0128 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF10__DPI0_D13                                   0x0128 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF10__DEBUG_MUX0_20                              0x0128 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF10__DEBUG_MUX1_31                              0x0128 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF11__PTF11                                      0x012C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF11__FXIO1_D11                                  0x012C 0x0848 0x2 0x2
+#define MX8ULP_PAD_PTF11__LPSPI4_PCS0                                0x012C 0x08F4 0x3 0x3
+#define MX8ULP_PAD_PTF11__LPUART4_RX                                 0x012C 0x08E0 0x4 0x3
+#define MX8ULP_PAD_PTF11__TPM4_CLKIN                                 0x012C 0x081C 0x6 0x2
+#define MX8ULP_PAD_PTF11__I2S4_RX_FS                                 0x012C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF11__SDHC1_RESET_B                              0x012C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF11__ENET0_1588_TMR0                            0x012C 0x0AD4 0x9 0x2
+#define MX8ULP_PAD_PTF11__TRACE0_D11                                 0x012C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF11__EPDC0_D12                                  0x012C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF11__DPI0_D12                                   0x012C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF11__LP_HV_DBG_MUX_27                           0x012C 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF11__DEBUG_MUX1_32                              0x012C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF12__PTF12                                      0x0130 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF12__FXIO1_D12                                  0x0130 0x084C 0x2 0x2
+#define MX8ULP_PAD_PTF12__LPSPI5_PCS1                                0x0130 0x0914 0x3 0x2
+#define MX8ULP_PAD_PTF12__LPUART5_CTS_B                              0x0130 0x08E8 0x4 0x3
+#define MX8ULP_PAD_PTF12__LPI2C5_SCL                                 0x0130 0x08D4 0x5 0x3
+#define MX8ULP_PAD_PTF12__TPM4_CH0                                   0x0130 0x0804 0x6 0x2
+#define MX8ULP_PAD_PTF12__I2S4_RXD0                                  0x0130 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF12__SDHC2_WP                                   0x0130 0x0ABC 0x8 0x1
+#define MX8ULP_PAD_PTF12__ENET0_1588_TMR1                            0x0130 0x0AD8 0x9 0x2
+#define MX8ULP_PAD_PTF12__TRACE0_D10                                 0x0130 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF12__EPDC0_D11                                  0x0130 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF12__DPI0_D11                                   0x0130 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF12__LP_HV_DBG_MUX_28                           0x0130 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF12__DEBUG_MUX1_33                              0x0130 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF13__PTF13                                      0x0134 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF13__FXIO1_D13                                  0x0134 0x0850 0x2 0x2
+#define MX8ULP_PAD_PTF13__LPSPI5_PCS2                                0x0134 0x0918 0x3 0x2
+#define MX8ULP_PAD_PTF13__LPUART5_RTS_B                              0x0134 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF13__LPI2C5_SDA                                 0x0134 0x08D8 0x5 0x3
+#define MX8ULP_PAD_PTF13__TPM4_CH1                                   0x0134 0x0808 0x6 0x2
+#define MX8ULP_PAD_PTF13__I2S4_RXD1                                  0x0134 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF13__SDHC2_CD                                   0x0134 0x0A8C 0x8 0x1
+#define MX8ULP_PAD_PTF13__ENET0_1588_TMR2                            0x0134 0x0ADC 0x9 0x2
+#define MX8ULP_PAD_PTF13__TRACE0_D9                                  0x0134 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF13__EPDC0_D10                                  0x0134 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF13__DPI0_D10                                   0x0134 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF13__DEBUG_MUX0_21                              0x0134 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF13__LP_HV_DBG_MUX_29                           0x0134 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF14__PTF14                                      0x0138 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF14__FXIO1_D14                                  0x0138 0x0854 0x2 0x2
+#define MX8ULP_PAD_PTF14__LPSPI5_PCS3                                0x0138 0x091C 0x3 0x2
+#define MX8ULP_PAD_PTF14__LPUART5_TX                                 0x0138 0x08F0 0x4 0x3
+#define MX8ULP_PAD_PTF14__LPI2C5_HREQ                                0x0138 0x08D0 0x5 0x3
+#define MX8ULP_PAD_PTF14__TPM4_CH2                                   0x0138 0x080C 0x6 0x2
+#define MX8ULP_PAD_PTF14__I2S4_MCLK                                  0x0138 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF14__SDHC2_VS                                   0x0138 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF14__ENET0_1588_TMR3                            0x0138 0x0AE0 0x9 0x2
+#define MX8ULP_PAD_PTF14__TRACE0_D8                                  0x0138 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF14__EPDC0_D9                                   0x0138 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF14__DPI0_D9                                    0x0138 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF14__DEBUG_MUX0_22                              0x0138 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF14__LP_HV_DBG_MUX_30                           0x0138 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF15__PTF15                                      0x013C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF15__FXIO1_D15                                  0x013C 0x0858 0x2 0x2
+#define MX8ULP_PAD_PTF15__LPUART5_RX                                 0x013C 0x08EC 0x4 0x3
+#define MX8ULP_PAD_PTF15__TPM4_CH3                                   0x013C 0x0810 0x6 0x2
+#define MX8ULP_PAD_PTF15__I2S4_TX_BCLK                               0x013C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF15__SDHC2_D1                                   0x013C 0x0A9C 0x8 0x3
+#define MX8ULP_PAD_PTF15__ENET0_RXD2                                 0x013C 0x0B00 0x9 0x2
+#define MX8ULP_PAD_PTF15__TRACE0_D7                                  0x013C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF15__EPDC0_D8                                   0x013C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF15__DPI0_D8                                    0x013C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF15__LP_HV_DBG_MUX_31                           0x013C 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF16__PTF16                                      0x0140 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF16__FXIO1_D16                                  0x0140 0x085C 0x2 0x2
+#define MX8ULP_PAD_PTF16__LPSPI5_SIN                                 0x0140 0x0924 0x3 0x2
+#define MX8ULP_PAD_PTF16__LPUART6_CTS_B                              0x0140 0x09CC 0x4 0x3
+#define MX8ULP_PAD_PTF16__LPI2C6_SCL                                 0x0140 0x09B8 0x5 0x3
+#define MX8ULP_PAD_PTF16__TPM4_CH4                                   0x0140 0x0814 0x6 0x2
+#define MX8ULP_PAD_PTF16__I2S4_TX_FS                                 0x0140 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF16__SDHC2_D0                                   0x0140 0x0A98 0x8 0x3
+#define MX8ULP_PAD_PTF16__ENET0_RXD3                                 0x0140 0x0B04 0x9 0x2
+#define MX8ULP_PAD_PTF16__TRACE0_D6                                  0x0140 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF16__EPDC0_D7                                   0x0140 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF16__DPI0_D7                                    0x0140 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF16__LP_HV_DBG_MUX_32                           0x0140 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF17__PTF17                                      0x0144 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF17__FXIO1_D17                                  0x0144 0x0860 0x2 0x2
+#define MX8ULP_PAD_PTF17__LPSPI5_SOUT                                0x0144 0x0928 0x3 0x2
+#define MX8ULP_PAD_PTF17__LPUART6_RTS_B                              0x0144 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF17__LPI2C6_SDA                                 0x0144 0x09BC 0x5 0x3
+#define MX8ULP_PAD_PTF17__TPM4_CH5                                   0x0144 0x0818 0x6 0x2
+#define MX8ULP_PAD_PTF17__I2S4_TXD0                                  0x0144 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF17__SDHC2_CLK                                  0x0144 0x0A90 0x8 0x3
+#define MX8ULP_PAD_PTF17__ENET0_RXCLK                                0x0144 0x0B0C 0x9 0x2
+#define MX8ULP_PAD_PTF17__TRACE0_D5                                  0x0144 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF17__EPDC0_D6                                   0x0144 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF17__DPI0_D6                                    0x0144 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF17__DEBUG_MUX0_23                              0x0144 0x0000 0xe 0x0
+#define MX8ULP_PAD_PTF17__LP_HV_DBG_MUX_33                           0x0144 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF18__PTF18                                      0x0148 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF18__FXIO1_D18                                  0x0148 0x0864 0x2 0x2
+#define MX8ULP_PAD_PTF18__LPSPI5_SCK                                 0x0148 0x0920 0x3 0x2
+#define MX8ULP_PAD_PTF18__LPUART6_TX                                 0x0148 0x09D4 0x4 0x3
+#define MX8ULP_PAD_PTF18__LPI2C6_HREQ                                0x0148 0x09B4 0x5 0x3
+#define MX8ULP_PAD_PTF18__TPM5_CLKIN                                 0x0148 0x0838 0x6 0x2
+#define MX8ULP_PAD_PTF18__I2S4_TXD1                                  0x0148 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF18__SDHC2_CMD                                  0x0148 0x0A94 0x8 0x3
+#define MX8ULP_PAD_PTF18__ENET0_TXD2                                 0x0148 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF18__TRACE0_D4                                  0x0148 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF18__EPDC0_D5                                   0x0148 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF18__DPI0_D5                                    0x0148 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF19__PTF19                                      0x014C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF19__FXIO1_D19                                  0x014C 0x0868 0x2 0x2
+#define MX8ULP_PAD_PTF19__LPSPI5_PCS0                                0x014C 0x0910 0x3 0x2
+#define MX8ULP_PAD_PTF19__LPUART6_RX                                 0x014C 0x09D0 0x4 0x3
+#define MX8ULP_PAD_PTF19__TPM5_CH0                                   0x014C 0x0820 0x6 0x2
+#define MX8ULP_PAD_PTF19__I2S5_RX_BCLK                               0x014C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF19__SDHC2_D3                                   0x014C 0x0AA4 0x8 0x3
+#define MX8ULP_PAD_PTF19__ENET0_TXD3                                 0x014C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF19__TRACE0_D3                                  0x014C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF19__EPDC0_D4                                   0x014C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF19__DPI0_D4                                    0x014C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF20__PTF20                                      0x0150 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF20__FXIO1_D20                                  0x0150 0x0870 0x2 0x2
+#define MX8ULP_PAD_PTF20__LPUART7_CTS_B                              0x0150 0x09D8 0x4 0x3
+#define MX8ULP_PAD_PTF20__LPI2C7_SCL                                 0x0150 0x09C4 0x5 0x3
+#define MX8ULP_PAD_PTF20__TPM5_CH1                                   0x0150 0x0824 0x6 0x2
+#define MX8ULP_PAD_PTF20__I2S5_RX_FS                                 0x0150 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF20__SDHC2_D2                                   0x0150 0x0AA0 0x8 0x3
+#define MX8ULP_PAD_PTF20__ENET0_TXCLK                                0x0150 0x0B10 0x9 0x2
+#define MX8ULP_PAD_PTF20__TRACE0_D2                                  0x0150 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF20__EPDC0_D3                                   0x0150 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF20__DPI0_D3                                    0x0150 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF21__PTF21                                      0x0154 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF21__FXIO1_D21                                  0x0154 0x0874 0x2 0x2
+#define MX8ULP_PAD_PTF21__SPDIF_CLK                                  0x0154 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF21__LPUART7_RTS_B                              0x0154 0x0000 0x4 0x0
+#define MX8ULP_PAD_PTF21__LPI2C7_SDA                                 0x0154 0x09C8 0x5 0x3
+#define MX8ULP_PAD_PTF21__TPM6_CLKIN                                 0x0154 0x0994 0x6 0x2
+#define MX8ULP_PAD_PTF21__I2S5_RXD0                                  0x0154 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF21__SDHC2_D4                                   0x0154 0x0AA8 0x8 0x2
+#define MX8ULP_PAD_PTF21__ENET0_CRS                                  0x0154 0x0AE8 0x9 0x2
+#define MX8ULP_PAD_PTF21__TRACE0_D1                                  0x0154 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF21__EPDC0_D2                                   0x0154 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF21__DPI0_D2                                    0x0154 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF22__PTF22                                      0x0158 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF22__FXIO1_D22                                  0x0158 0x0878 0x2 0x2
+#define MX8ULP_PAD_PTF22__SPDIF_IN0                                  0x0158 0x0B74 0x3 0x3
+#define MX8ULP_PAD_PTF22__LPUART7_TX                                 0x0158 0x09E0 0x4 0x3
+#define MX8ULP_PAD_PTF22__LPI2C7_HREQ                                0x0158 0x09C0 0x5 0x3
+#define MX8ULP_PAD_PTF22__TPM6_CH0                                   0x0158 0x097C 0x6 0x2
+#define MX8ULP_PAD_PTF22__I2S5_RXD1                                  0x0158 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF22__SDHC2_D5                                   0x0158 0x0AAC 0x8 0x2
+#define MX8ULP_PAD_PTF22__ENET0_COL                                  0x0158 0x0AE4 0x9 0x2
+#define MX8ULP_PAD_PTF22__TRACE0_D0                                  0x0158 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF22__EPDC0_D1                                   0x0158 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF22__DPI0_D1                                    0x0158 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF23__PTF23                                      0x015C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF23__FXIO1_D23                                  0x015C 0x087C 0x2 0x2
+#define MX8ULP_PAD_PTF23__SPDIF_OUT0                                 0x015C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF23__LPUART7_RX                                 0x015C 0x09DC 0x4 0x3
+#define MX8ULP_PAD_PTF23__I3C2_PUR                                   0x015C 0x0000 0x5 0x0
+#define MX8ULP_PAD_PTF23__TPM6_CH1                                   0x015C 0x0980 0x6 0x2
+#define MX8ULP_PAD_PTF23__I2S5_RXD2                                  0x015C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF23__SDHC2_D6                                   0x015C 0x0AB0 0x8 0x2
+#define MX8ULP_PAD_PTF23__ENET0_TXER                                 0x015C 0x0000 0x9 0x0
+#define MX8ULP_PAD_PTF23__TRACE0_CLKOUT                              0x015C 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF23__EPDC0_D0                                   0x015C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF23__DPI0_D0                                    0x015C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF24__PTF24                                      0x0160 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF24__FXIO1_D24                                  0x0160 0x0880 0x2 0x2
+#define MX8ULP_PAD_PTF24__SPDIF_IN1                                  0x0160 0x0B78 0x3 0x3
+#define MX8ULP_PAD_PTF24__I3C2_SCL                                   0x0160 0x08BC 0x5 0x4
+#define MX8ULP_PAD_PTF24__I2S5_RXD3                                  0x0160 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF24__SDHC2_D7                                   0x0160 0x0AB4 0x8 0x2
+#define MX8ULP_PAD_PTF24__DBI0_WRX                                   0x0160 0x0000 0xa 0x0
+#define MX8ULP_PAD_PTF24__EPDC0_SDCLK                                0x0160 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF24__DPI0_PCLK                                  0x0160 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF24__WUU1_P12                                   0x0160 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF25__PTF25                                      0x0164 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF25__FXIO1_D25                                  0x0164 0x0884 0x2 0x2
+#define MX8ULP_PAD_PTF25__SPDIF_OUT1                                 0x0164 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF25__I3C2_SDA                                   0x0164 0x08C0 0x5 0x4
+#define MX8ULP_PAD_PTF25__TPM7_CH5                                   0x0164 0x09AC 0x6 0x2
+#define MX8ULP_PAD_PTF25__I2S5_MCLK                                  0x0164 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF25__SDHC2_DQS                                  0x0164 0x0AB8 0x8 0x2
+#define MX8ULP_PAD_PTF25__EXT_AUD_MCLK2                              0x0164 0x0800 0x9 0x3
+#define MX8ULP_PAD_PTF25__EPDC0_GDSP                                 0x0164 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF25__DPI0_VSYNC                                 0x0164 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF25__WUU1_P13                                   0x0164 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF26__PTF26                                      0x0168 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF26__FXIO1_D26                                  0x0168 0x0888 0x2 0x2
+#define MX8ULP_PAD_PTF26__SPDIF_IN2                                  0x0168 0x0B7C 0x3 0x3
+#define MX8ULP_PAD_PTF26__TPM7_CLKIN                                 0x0168 0x09B0 0x6 0x2
+#define MX8ULP_PAD_PTF26__I2S5_TX_BCLK                               0x0168 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF26__SDHC2_RESET_B                              0x0168 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF26__EPDC0_SDLE                                 0x0168 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF26__DPI0_HSYNC                                 0x0168 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF26__WUU1_P14                                   0x0168 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF27__PTF27                                      0x016C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF27__FXIO1_D27                                  0x016C 0x088C 0x2 0x2
+#define MX8ULP_PAD_PTF27__SPDIF_OUT2                                 0x016C 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF27__TPM7_CH0                                   0x016C 0x0998 0x6 0x2
+#define MX8ULP_PAD_PTF27__I2S5_TX_FS                                 0x016C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF27__SDHC2_WP                                   0x016C 0x0ABC 0x8 0x2
+#define MX8ULP_PAD_PTF27__EPDC0_SDCE0                                0x016C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF27__DPI0_DE                                    0x016C 0x0000 0xc 0x0
+#define MX8ULP_PAD_PTF27__WUU1_P15                                   0x016C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF28__PTF28                                      0x0170 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF28__FXIO1_D28                                  0x0170 0x0890 0x2 0x2
+#define MX8ULP_PAD_PTF28__SPDIF_IN3                                  0x0170 0x0B80 0x3 0x3
+#define MX8ULP_PAD_PTF28__TPM7_CH1                                   0x0170 0x099C 0x6 0x2
+#define MX8ULP_PAD_PTF28__I2S5_TXD0                                  0x0170 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF28__SDHC2_CD                                   0x0170 0x0A8C 0x8 0x2
+#define MX8ULP_PAD_PTF28__EPDC0_SDCLK_B                              0x0170 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF28__LP_HV_DBG_MUX_20                           0x0170 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF29__PTF29                                      0x0174 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF29__FXIO1_D29                                  0x0174 0x0894 0x2 0x2
+#define MX8ULP_PAD_PTF29__SPDIF_OUT3                                 0x0174 0x0000 0x3 0x0
+#define MX8ULP_PAD_PTF29__TPM7_CH2                                   0x0174 0x09A0 0x6 0x2
+#define MX8ULP_PAD_PTF29__I2S5_TXD1                                  0x0174 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF29__SDHC2_VS                                   0x0174 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF29__EPDC0_SDCE1                                0x0174 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF29__WDOG3_RST                                  0x0174 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF29__LP_HV_DBG_MUX_21                           0x0174 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF30__PTF30                                      0x0178 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF30__FXIO1_D30                                  0x0178 0x089C 0x2 0x2
+#define MX8ULP_PAD_PTF30__TPM7_CH3                                   0x0178 0x09A4 0x6 0x2
+#define MX8ULP_PAD_PTF30__I2S5_TXD2                                  0x0178 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF30__MQS1_LEFT                                  0x0178 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF30__EPDC0_SDCE2                                0x0178 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF30__WDOG4_RST                                  0x0178 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF30__LP_HV_DBG_MUX_22                           0x0178 0x0000 0xf 0x0
+#define MX8ULP_PAD_PTF31__PTF31                                      0x017C 0x0000 0x1 0x0
+#define MX8ULP_PAD_PTF31__FXIO1_D31                                  0x017C 0x08A0 0x2 0x2
+#define MX8ULP_PAD_PTF31__TPM7_CH4                                   0x017C 0x09A8 0x6 0x2
+#define MX8ULP_PAD_PTF31__I2S5_TXD3                                  0x017C 0x0000 0x7 0x0
+#define MX8ULP_PAD_PTF31__MQS1_RIGHT                                 0x017C 0x0000 0x8 0x0
+#define MX8ULP_PAD_PTF31__EPDC0_SDCE3                                0x017C 0x0000 0xb 0x0
+#define MX8ULP_PAD_PTF31__WDOG5_RST                                  0x017C 0x0000 0xd 0x0
+#define MX8ULP_PAD_PTF31__LP_HV_DBG_MUX_23                           0x017C 0x0000 0xf 0x0
+#define MX8ULP_PAD_BOOT_MODE0__BOOT_MODE0                            0x0400 0x0000 0x0 0x0
+#define MX8ULP_PAD_BOOT_MODE1__BOOT_MODE1                            0x0404 0x0000 0x0 0x0
+
+#endif /* __DTS_IMX8ULP_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
new file mode 100644
index 000000000..8a6596d5a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <dt-bindings/clock/imx8ulp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8ulp-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8ulp-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpiod;
+		gpio1 = &gpioe;
+		gpio2 = &gpiof;
+		mmc0 = &usdhc0;
+		mmc1 = &usdhc1;
+		mmc2 = &usdhc2;
+		serial0 = &lpuart4;
+		serial1 = &lpuart5;
+		serial2 = &lpuart6;
+		serial3 = &lpuart7;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A35_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		A35_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A35_L2>;
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		A35_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0>;
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@2d400000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A35_0>, <&A35_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&scmi_sensor 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+	};
+
+	frosc: clock-frosc {
+		compatible = "fixed-clock";
+		clock-frequency = <192000000>;
+		clock-output-names = "frosc";
+		#clock-cells = <0>;
+	};
+
+	lposc: clock-lposc {
+		compatible = "fixed-clock";
+		clock-frequency = <1000000>;
+		clock-output-names = "lposc";
+		#clock-cells = <0>;
+	};
+
+	rosc: clock-rosc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "rosc";
+		#clock-cells = <0>;
+	};
+
+	sosc: clock-sosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "sosc";
+		#clock-cells = <0>;
+	};
+
+	sram@2201f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x2201f000 0x0 0x1000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2201f000 0x1000>;
+
+		scmi_buf: scmi-sram-section@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x400>;
+		};
+	};
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0xc20000fe>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			shmem = <&scmi_buf>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_sensor: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx8ulp-cm33";
+		status = "disabled";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>,
+			 <0x60000000 0x0 0x60000000 0x1000000>;
+
+		s4muap: mailbox@27020000 {
+			compatible = "fsl,imx8ulp-mu-s4";
+			reg = <0x27020000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		per_bridge3: bus@29000000 {
+			compatible = "simple-bus";
+			reg = <0x29000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mu: mailbox@29220000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29220000 0x10000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			mu3: mailbox@29230000 {
+				compatible = "fsl,imx8ulp-mu";
+				reg = <0x29230000 0x10000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_MU3_A>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@292a0000 {
+				compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
+				reg = <0x292a0000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
+				timeout-sec = <40>;
+			};
+
+			cgc1: clock-controller@292c0000 {
+				compatible = "fsl,imx8ulp-cgc1";
+				reg = <0x292c0000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			pcc3: clock-controller@292d0000 {
+				compatible = "fsl,imx8ulp-pcc3";
+				reg = <0x292d0000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			tpm5: tpm@29340000 {
+				compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
+				reg = <0x29340000 0x1000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
+					 <&pcc3 IMX8ULP_CLK_TPM5>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@29370000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29370000 0x10000>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
+					 <&pcc3 IMX8ULP_CLK_LPI2C4>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@29380000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29380000 0x10000>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
+					 <&pcc3 IMX8ULP_CLK_LPI2C5>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpuart4: serial@29390000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29390000 0x1000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart5: serial@293a0000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x293a0000 0x1000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@293b0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+				reg = <0x293b0000 0x10000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
+					 <&pcc3 IMX8ULP_CLK_LPSPI4>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpspi5: spi@293c0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+				reg = <0x293c0000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
+					 <&pcc3 IMX8ULP_CLK_LPSPI5>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		per_bridge4: bus@29800000 {
+			compatible = "simple-bus";
+			reg = <0x29800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pcc4: clock-controller@29800000 {
+				compatible = "fsl,imx8ulp-pcc4";
+				reg = <0x29800000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			flexspi2: spi@29810000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
+					 <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				clock-names = "fspi", "fspi_en";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@29840000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29840000 0x10000>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
+					 <&pcc4 IMX8ULP_CLK_LPI2C6>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@29850000 {
+				compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x29850000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
+					 <&pcc4 IMX8ULP_CLK_LPI2C7>;
+				clock-names = "per", "ipg";
+				assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
+				assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+				assigned-clock-rates = <48000000>;
+				status = "disabled";
+			};
+
+			lpuart6: serial@29860000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29860000 0x1000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart7: serial@29870000 {
+				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x29870000 0x1000>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			iomuxc1: pinctrl@298c0000 {
+				compatible = "fsl,imx8ulp-iomuxc1";
+				reg = <0x298c0000 0x10000>;
+			};
+
+			usdhc0: mmc@298d0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298d0000 0x10000>;
+				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC0>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>,
+						  <&pcc4 IMX8ULP_CLK_USDHC0>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>;
+				assigned-clock-rates = <389283840>, <389283840>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc1: mmc@298e0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298e0000 0x10000>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
+						  <&pcc4 IMX8ULP_CLK_USDHC1>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				assigned-clock-rates = <194641920>, <194641920>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@298f0000 {
+				compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x298f0000 0x10000>;
+				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+					 <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
+					 <&pcc4 IMX8ULP_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
+				assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
+						  <&pcc4 IMX8ULP_CLK_USDHC2>;
+				assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
+				assigned-clock-rates = <194641920>, <194641920>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			fec: ethernet@29950000 {
+				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x29950000 0x10000>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0";
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
+				status = "disabled";
+			};
+		};
+
+		gpioe: gpio@2d000080 {
+				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+				reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
+					 <&pcc4 IMX8ULP_CLK_PCTLE>;
+				clock-names = "gpio", "port";
+				gpio-ranges = <&iomuxc1 0 32 24>;
+		};
+
+		gpiof: gpio@2d010080 {
+				compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+				reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
+					 <&pcc4 IMX8ULP_CLK_PCTLF>;
+				clock-names = "gpio", "port";
+				gpio-ranges = <&iomuxc1 0 64 32>;
+		};
+
+		per_bridge5: bus@2d800000 {
+			compatible = "simple-bus";
+			reg = <0x2d800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			cgc2: clock-controller@2da60000 {
+				compatible = "fsl,imx8ulp-cgc2";
+				reg = <0x2da60000 0x10000>;
+				#clock-cells = <1>;
+			};
+
+			pcc5: clock-controller@2da70000 {
+				compatible = "fsl,imx8ulp-pcc5";
+				reg = <0x2da70000 0x10000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
+		gpiod: gpio@2e200080 {
+			compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
+				 <&pcc5 IMX8ULP_CLK_RGPIOD>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc1 0 0 24>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
new file mode 100644
index 000000000..bc659066e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+/* Colibri Ethernet */
+&fec1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog0>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>,
+		   <&lsio_gpio5 2 GPIO_ACTIVE_LOW>;
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Colibri SDCard */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
new file mode 100644
index 000000000..9af769ab8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	/* fixed crystal dedicated to mcp25xx */
+	clk16m: clock-16mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_lpspi2_cs2>;
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+
+	mcp2515: can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_can_int>;
+		pinctrl-names = "default";
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
new file mode 100644
index 000000000..98202a437
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris-v2.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+#include "imx8x-colibri-iris.dtsi"
+
+/ {
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		enable-active-high;
+		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds_converter &pinctrl_gpio_iris>;
+
+	pinctrl_enable_3v3_vmmc: enable_3v3_vmmc {
+		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x20>;	/* SODIMM 100 */
+	};
+
+	pinctrl_lvds_converter: lcd-lvds {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_LSIO_GPIO1_IO18		0x20>,	/* SODIMM  55 */
+			   /* 6B/8B mode. Select LOW - 8B mode (24bit) */
+			   <IMX8QXP_FLEXCAN1_RX_LSIO_GPIO1_IO17		0x20>,	/* SODIMM  63 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17		0x20>,	/* SODIMM  95 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18	0x20>;	/* SODIMM  99 */
+	};
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	cap-power-off-card;
+	/delete-property/ no-1-8-v;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
new file mode 100644
index 000000000..8d06925a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2021 Toradex
+ */
+
+/ {
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &rtc;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V";
+	};
+};
+
+&colibri_gpio_keys {
+	status = "okay";
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	status = "okay";
+};
+
+/* Colibri I2C */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21	0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04		0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25		0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28		0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27		0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03	0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26		0x20>;		/* SODIMM  79 */
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14	0x20>;	/* SODIMM 22 */
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x20>; /* SODIMM 23 */
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+};
+
+/* Colibri UART_B */
+&lpuart0 {
+	status = "okay";
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	status = "okay";
+};
+
+&lsio_gpio3 {
+	/*
+	 * This turns the LVDS transceiver on. If one wants to turn the
+	 * transceiver off, that property has to be deleted and the gpio handled
+	 * in userspace.
+	 */
+	lvds-tx-on-hog {
+		gpio-hog;
+		gpios = <18 0>;
+		output-high;
+	};
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	status = "okay";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	status = "okay";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
new file mode 100644
index 000000000..49d105eb4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -0,0 +1,778 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = &lpuart3;
+	};
+
+	colibri_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		status = "disabled";
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/* TODO Analogue Inputs */
+
+/* TODO Cooling maps for DX */
+
+&cpu_alert0 {
+	hysteresis = <2000>;
+	temperature = <90000>;
+	type = "passive";
+};
+
+&cpu_crit0 {
+	hysteresis = <2000>;
+	temperature = <105000>;
+	type = "critical";
+};
+
+/* TODO flexcan1 - 3 */
+
+/* TODO GPU */
+
+/* On-module I2C */
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>;
+	status = "okay";
+
+	/* Touch controller */
+	touchscreen@2c {
+		compatible = "adi,ad7879-1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ad7879_int>;
+		reg = <0x2c>;
+		interrupt-parent = <&lsio_gpio3>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-max-pressure = <4096>;
+		adi,resistance-plate-x = <120>;
+		adi,first-conversion-delay = /bits/ 8 <3>;
+		adi,acquisition-time = /bits/ 8 <1>;
+		adi,median-filter-size = /bits/ 8 <2>;
+		adi,averaging = /bits/ 8 <1>;
+		adi,conversion-interval = /bits/ 8 <255>;
+		status = "disabled";
+	};
+};
+
+/* TODO i2c lvds0 accessible on FFC (X2) */
+
+/* TODO i2c lvds1 accessible on FFC (X3) */
+
+/* Colibri I2C */
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+&jpegdec {
+	status = "okay";
+};
+
+&jpegenc {
+	status = "okay";
+};
+
+/* TODO Parallel RRB */
+
+/* Colibri UART_B */
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+};
+
+/* Colibri UART_C */
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart2>;
+};
+
+/* Colibri UART_A */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>;
+};
+
+/* Colibri FastEthernet */
+&fec1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			max-speed = <100>;
+			reg = <2>;
+		};
+	};
+};
+
+/* Colibri SPI */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+};
+
+&lsio_gpio0 {
+	gpio-line-names = "",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_68",
+			  "",
+			  "",
+			  "SODIMM_82",
+			  "SODIMM_56",
+			  "SODIMM_28",
+			  "SODIMM_30",
+			  "",
+			  "SODIMM_61",
+			  "SODIMM_103",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_100";
+};
+
+&lsio_gpio1 {
+	gpio-line-names = "SODIMM_86",
+			  "SODIMM_92",
+			  "SODIMM_90",
+			  "SODIMM_88",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_59",
+			  "",
+			  "SODIMM_6",
+			  "SODIMM_8",
+			  "",
+			  "",
+			  "SODIMM_2",
+			  "SODIMM_4",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_63",
+			  "SODIMM_55",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_36",
+			  "SODIMM_38",
+			  "SODIMM_21",
+			  "SODIMM_19",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_196",
+			  "SODIMM_194",
+			  "SODIMM_186",
+			  "SODIMM_188",
+			  "SODIMM_138";
+};
+
+&lsio_gpio2 {
+	gpio-line-names = "SODIMM_23",
+			  "",
+			  "",
+			  "SODIMM_144";
+};
+
+&lsio_gpio3 {
+	gpio-line-names = "SODIMM_96",
+			  "SODIMM_75",
+			  "SODIMM_37",
+			  "SODIMM_29",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_43",
+			  "SODIMM_45",
+			  "SODIMM_69",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_77",
+			  "SODIMM_89",
+			  "SODIMM_93",
+			  "SODIMM_95",
+			  "SODIMM_99",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_98",
+			  "SODIMM_102",
+			  "SODIMM_104",
+			  "SODIMM_106";
+};
+
+&lsio_gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "SODIMM_129",
+			  "SODIMM_133",
+			  "SODIMM_127",
+			  "SODIMM_131",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_44",
+			  "",
+			  "SODIMM_76",
+			  "SODIMM_31",
+			  "SODIMM_47",
+			  "SODIMM_190",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_51",
+			  "SODIMM_53";
+};
+
+&lsio_gpio5 {
+	gpio-line-names = "",
+			  "SODIMM_57",
+			  "SODIMM_65",
+			  "SODIMM_85",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_135",
+			  "SODIMM_137",
+			  "UNUSABLE_SODIMM_180",
+			  "UNUSABLE_SODIMM_184";
+};
+
+/* Colibri PWM_B */
+&lsio_pwm0 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_b>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_C */
+&lsio_pwm1 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_c>;
+	pinctrl-names = "default";
+};
+
+/* Colibri PWM_D */
+&lsio_pwm2 {
+	#pwm-cells = <3>;
+	pinctrl-0 = <&pinctrl_pwm_d>;
+	pinctrl-names = "default";
+};
+
+/* TODO MIPI CSI */
+
+/* TODO MIPI DSI with DSI-to-HDMI bridge lt8912 */
+
+/* TODO on-module PCIe for Wi-Fi */
+
+/* TODO On-module i2s / Audio */
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Colibri SD/MMC Card */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_module_3v3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	disable-wp;
+	no-1-8-v;
+};
+
+/* TODO USB Client/Host */
+
+/* TODO USB Host */
+
+/* TODO VPU Encoder/Decoder */
+
+&iomuxc {
+	/* On-module touch pen-down interrupt */
+	pinctrl_ad7879_int: ad7879intgrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05	0x21>;
+	};
+
+	/* Colibri Analogue Inputs */
+	pinctrl_adc0: adc0grp {
+		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0			0x60>,		/* SODIMM   8 */
+			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1			0x60>,		/* SODIMM   6 */
+			   <IMX8QXP_ADC_IN4_ADMA_ADC_IN4			0x60>,		/* SODIMM   4 */
+			   <IMX8QXP_ADC_IN5_ADMA_ADC_IN5			0x60>;		/* SODIMM   2 */
+	};
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pingroup conflicts with pingroups
+	 * pinctrl_pwm_b/pinctrl_pwm_c. Don't enable them
+	 * simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_GPIO0_IO22			0x21>,		/* SODIMM  30 */
+			   <IMX8QXP_UART1_TX_LSIO_GPIO0_IO21			0x4000021>;	/* SODIMM  28 */
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20		0x4000021>,	/* SODIMM 107 */
+			   <IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24		0x21>;		/* SODIMM 106 */
+	};
+
+	pinctrl_can_int: canintgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13			0x40>;		/* SODIMM  73 */
+	};
+
+	pinctrl_csi_ctl: csictlgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14		0x20>,		/* SODIMM  77 */
+			   <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15		0x20>;		/* SODIMM  89 */
+	};
+
+	pinctrl_csi_mclk: csimclkgrp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_CI_PI_MCLK				0xC0000041>;	/* SODIMM  75 / X3-12 */
+	};
+
+	pinctrl_ext_io0: extio0grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08		0x06000040>;	/* SODIMM 135 */
+	};
+
+	/* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000020>,
+			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT	0x06000061>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x61>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER	0x61>;
+	};
+
+	pinctrl_fec1_sleep: fec1slpgrp {
+		fsl,pins = <IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11			0x06000041>,
+			   <IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10			0x06000041>,
+			   <IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31		0x41>,
+			   <IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06		0x41>,
+			   <IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07		0x41>;
+	};
+
+	/* Colibri optional CAN on UART_B RTS/CTS */
+	pinctrl_flexcan1: flexcan0grp {
+		fsl,pins = <IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX		0x21>,		/* SODIMM  32 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX		0x21>;		/* SODIMM  34 */
+	};
+
+	/* Colibri optional CAN on PS2 */
+	pinctrl_flexcan2: flexcan1grp {
+		fsl,pins = <IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX		0x21>,		/* SODIMM  55 */
+			   <IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX		0x21>;		/* SODIMM  63 */
+	};
+
+	/* Colibri optional CAN on UART_A TXD/RXD */
+	pinctrl_flexcan3: flexcan2grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX		0x21>,		/* SODIMM  35 */
+			   <IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX		0x21>;		/* SODIMM  33 */
+	};
+
+	/* Colibri LCD Back-Light GPIO */
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12		0x60>;		/* SODIMM  71 */
+	};
+
+	/* HDMI Hot Plug Detect on FFC (X2) */
+	pinctrl_gpio_hpd: gpiohpdgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31		0x20>;		/* SODIMM 138 */
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10		0x06700041>;	/* SODIMM  45 */
+	};
+
+	pinctrl_hog0: hog0grp {
+		fsl,pins = <IMX8QXP_CSI_D07_CI_PI_D09				0x61>,		/* SODIMM  65 */
+			   <IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11		0x20>,		/* SODIMM  69 */
+			   <IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26			0x20>,		/* SODIMM  79 */
+			   <IMX8QXP_CSI_D02_CI_PI_D04				0x61>,		/* SODIMM  79 */
+			   <IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03		0x06000020>,	/* SODIMM  85 */
+			   <IMX8QXP_CSI_D06_CI_PI_D08				0x61>,		/* SODIMM  85 */
+			   <IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17			0x20>,		/* SODIMM  95 */
+			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27			0x20>,		/* SODIMM  97 */
+			   <IMX8QXP_CSI_D03_CI_PI_D05				0x61>,		/* SODIMM  97 */
+			   <IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18		0x20>,		/* SODIMM  99 */
+			   <IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28			0x20>,		/* SODIMM 101 */
+			   <IMX8QXP_CSI_D00_CI_PI_D02				0x61>,		/* SODIMM 101 */
+			   <IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25			0x20>,		/* SODIMM 103 */
+			   <IMX8QXP_CSI_D01_CI_PI_D03				0x61>,		/* SODIMM 103 */
+			   <IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19		0x20>,		/* SODIMM 105 */
+			   <IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05			0x20>,		/* SODIMM 127 */
+			   <IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06			0x20>,		/* SODIMM 131 */
+			   <IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04			0x20>,		/* SODIMM 133 */
+			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00			0x20>,		/* SODIMM  96 */
+			   <IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21		0x20>,		/* SODIMM  98 */
+			   <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31			0x20>,		/* SODIMM 100 */
+			   <IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22			0x20>,		/* SODIMM 102 */
+			   <IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23		0x20>;		/* SODIMM 104 */
+	};
+
+	pinctrl_hog1: hog1grp {
+		fsl,pins = <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
+	};
+
+	pinctrl_hog2: hog2grp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>;		/* SODIMM  75 */
+	};
+
+	/*
+	 * This pin is used in the SCFW as a UART. Using it from
+	 * Linux would require rewritting the SCFW board file.
+	 */
+	pinctrl_hog_scfw: hogscfwgrp {
+		fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03		0x20>;		/* SODIMM 144 */
+	};
+
+	/* On Module I2C */
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL		0x06000021>,
+			   <IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA		0x06000021>;
+	};
+
+	/* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */
+	pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL	0xc6000020>,	/* SODIMM 140 */
+			   <IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA	0xc6000020>;	/* SODIMM 142 */
+	};
+
+	/* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */
+	pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL	0xc6000020>,	/* SODIMM 186 */
+			   <IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA	0xc6000020>;	/* SODIMM 188 */
+	};
+
+	/* Colibri I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL		0x06000021>,	/* SODIMM 196 */
+			   <IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA		0x06000021>;	/* SODIMM 194 */
+	};
+
+	/* Colibri Parallel RGB LCD Interface */
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK			0x60>,		/* SODIMM  56 */
+			   <IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC			0x60>,		/* SODIMM  68 */
+			   <IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC			0x60>,		/* SODIMM  82 */
+			   <IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN			0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19		0x40>,		/* SODIMM  44 */
+			   <IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21			0x60>,		/* SODIMM  76 */
+			   <IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01			0x60>,		/* SODIMM  70 */
+			   <IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02			0x60>,		/* SODIMM  60 */
+			   <IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03			0x60>,		/* SODIMM  58 */
+			   <IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04			0x60>,		/* SODIMM  78 */
+			   <IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05			0x60>,		/* SODIMM  72 */
+			   <IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06		0x60>,		/* SODIMM  80 */
+			   <IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07		0x60>,		/* SODIMM  46 */
+			   <IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08		0x60>,		/* SODIMM  62 */
+			   <IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09		0x60>,		/* SODIMM  48 */
+			   <IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10			0x60>,		/* SODIMM  74 */
+			   <IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11			0x60>,		/* SODIMM  50 */
+			   <IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12		0x60>,		/* SODIMM  52 */
+			   <IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13			0x60>,		/* SODIMM  54 */
+			   <IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14			0x60>,		/* SODIMM  66 */
+			   <IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15			0x60>,		/* SODIMM  64 */
+			   <IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16			0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01		0x60>,		/* SODIMM  57 */
+			   <IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17			0x60>;		/* SODIMM  61 */
+	};
+
+	/* Colibri SPI */
+	pinctrl_lpspi2: lpspi2grp {
+		fsl,pins = <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00			0x21>,		/* SODIMM  86 */
+			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO			0x06000040>,	/* SODIMM  92 */
+			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI			0x06000040>,	/* SODIMM  90 */
+			   <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK			0x06000040>;	/* SODIMM  88 */
+	};
+
+	pinctrl_lpspi2_cs2: lpspi2cs2grp {
+		fsl,pins = <IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02		0x21>;		/* SODIMM  65 */
+	};
+
+	/* Colibri UART_B */
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <IMX8QXP_UART0_RX_ADMA_UART0_RX			0x06000020>,	/* SODIMM  36 */
+			   <IMX8QXP_UART0_TX_ADMA_UART0_TX			0x06000020>,	/* SODIMM  38 */
+			   <IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B		0x06000020>,	/* SODIMM  34 */
+			   <IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B		0x06000020>;	/* SODIMM  32 */
+	};
+
+	/* Colibri UART_C */
+	pinctrl_lpuart2: lpuart2grp {
+		fsl,pins = <IMX8QXP_UART2_RX_ADMA_UART2_RX			0x06000020>,	/* SODIMM  19 */
+			   <IMX8QXP_UART2_TX_ADMA_UART2_TX			0x06000020>;	/* SODIMM  21 */
+	};
+
+	/* Colibri UART_A */
+	pinctrl_lpuart3: lpuart3grp {
+		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX			0x06000020>,	/* SODIMM  33 */
+			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX			0x06000020>;	/* SODIMM  35 */
+	};
+
+	/* Colibri UART_A Control */
+	pinctrl_lpuart3_ctrl: lpuart3ctrlgrp {
+		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00		0x20>,		/* SODIMM  23 */
+			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29			0x20>,		/* SODIMM  25 */
+			   <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30			0x20>,		/* SODIMM  27 */
+			   <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03			0x20>,		/* SODIMM  29 */
+			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22			0x20>,		/* SODIMM  31 */
+			   <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02			0x20>;		/* SODIMM  37 */
+	};
+
+	/* On module wifi module */
+	pinctrl_pcieb: pciebgrp {
+		fsl,pins = <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01		0x04000061>,	/* SODIMM 178 */
+			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02		0x04000061>,	/* SODIMM  94 */
+			   <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00		0x60>;		/* SODIMM  81 */
+	};
+
+	/* Colibri PWM_A */
+	pinctrl_pwm_a: pwmagrp {
+	/* both pins are connected together, reserve the unused CSI_D05 */
+		fsl,pins = <IMX8QXP_CSI_D05_CI_PI_D07				0x61>,		/* SODIMM  59 */
+			   <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT			0x60>;		/* SODIMM  59 */
+	};
+
+	/* Colibri PWM_B */
+	pinctrl_pwm_b: pwmbgrp {
+		fsl,pins = <IMX8QXP_UART1_TX_LSIO_PWM0_OUT			0x60>;		/* SODIMM  28 */
+	};
+
+	/* Colibri PWM_C */
+	pinctrl_pwm_c: pwmcgrp {
+		fsl,pins = <IMX8QXP_UART1_RX_LSIO_PWM1_OUT			0x60>;		/* SODIMM  30 */
+	};
+
+	/* Colibri PWM_D */
+	pinctrl_pwm_d: pwmdgrp {
+	/* both pins are connected together, reserve the unused CSI_D04 */
+		fsl,pins = <IMX8QXP_CSI_D04_CI_PI_D06				0x61>,		/* SODIMM  67 */
+			   <IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT			0x60>;		/* SODIMM  67 */
+	};
+
+	/* On-module I2S */
+	pinctrl_sai0: sai0grp {
+		fsl,pins = <IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD			0x06000040>,
+			   <IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD			0x06000040>,
+			   <IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC			0x06000040>,
+			   <IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS			0x06000040>;
+	};
+
+	/* Colibri Audio Analogue Microphone GND */
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06		0x41>;
+	};
+
+	/* On-module SGTL5000 clock */
+	pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp {
+		fsl,pins = <IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0			0x21>;
+	};
+
+	/* On-module USB interrupt */
+	pinctrl_usb3503a: usb3503agrp {
+		fsl,pins = <IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04		0x61>;
+	};
+
+	/* Colibri USB Client Cable Detect */
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09	0x06000040>;	/* SODIMM 137 */
+	};
+
+	/* USB Host Power Enable */
+	pinctrl_usbh1_reg: usbh1reggrp {
+		fsl,pins = <IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03			0x06000040>;	/* SODIMM 129 */
+	};
+
+	/* On-module eMMC */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK			0x06000041>,
+			   <IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD			0x21>,
+			   <IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0		0x21>,
+			   <IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1		0x21>,
+			   <IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2		0x21>,
+			   <IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3		0x21>,
+			   <IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4		0x21>,
+			   <IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5		0x21>,
+			   <IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6		0x21>,
+			   <IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7		0x21>,
+			   <IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE		0x41>,
+			   <IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B		0x21>;
+	};
+
+	/* Colibri SD/MMC Card Detect */
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x06000021>;	/* SODIMM  43 */
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp {
+		fsl,pins = <IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09		0x60>;		/* SODIMM  43 */
+	};
+
+	/* Colibri SD/MMC Card */
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK			0x06000041>,	/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD			0x21>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0		0x21>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1		0x21>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2		0x21>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3		0x21>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2slpgrp {
+		fsl,pins = <IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23			0x60>,		/* SODIMM  47 */
+			   <IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24			0x60>,		/* SODIMM 190 */
+			   <IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25		0x60>,		/* SODIMM 192 */
+			   <IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26		0x60>,		/* SODIMM  49 */
+			   <IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27		0x60>,		/* SODIMM  51 */
+			   <IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28		0x60>,		/* SODIMM  53 */
+			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT		0x21>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K	0x20>;
+	};
+};
+
+/* Delete peripherals which are not present on SOC, but are defined in imx8-ss-*.dtsi */
+
+/delete-node/ &adc1;
+/delete-node/ &adc1_lpcg;
+/delete-node/ &dsp;
+/delete-node/ &dsp_lpcg;
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
new file mode 100644
index 000000000..cafd39130
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/ {
+	model = "NXP i.MX93 11X11 EVK board";
+	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4000000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC			0x57e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1			0x57e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x57e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x15fe
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x13fe
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
new file mode 100644
index 000000000..4298a145f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2022 NXP
+ */
+
+#ifndef __DTS_IMX93_PINFUNC_H
+#define __DTS_IMX93_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI                            0x0000 0x01B0 0x03D8 0x0 0x0
+#define MX93_PAD_DAP_TDI__MQS2_LEFT                               0x0000 0x01B0 0x0000 0x1 0x0
+#define MX93_PAD_DAP_TDI__CAN2_TX                                 0x0000 0x01B0 0x0000 0x3 0x0
+#define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30                        0x0000 0x01B0 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TDI__GPIO3_IO28                              0x0000 0x01B0 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TDI__LPUART5_RX                              0x0000 0x01B0 0x0430 0x6 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                      0x0004 0x01B4 0x03DC 0x0 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31                  0x0004 0x01B4 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29                        0x0004 0x01B4 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                     0x0004 0x01B4 0x0000 0x6 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                     0x0008 0x01B8 0x03D4 0x0 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30                 0x0008 0x01B8 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30                       0x0008 0x01B8 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                    0x0008 0x01B8 0x042C 0x6 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                   0x000C 0x01BC 0x0000 0x0 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT                     0x000C 0x01BC 0x0000 0x1 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX                        0x000C 0x01BC 0x0364 0x3 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31               0x000C 0x01BC 0x0000 0x4 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31                     0x000C 0x01BC 0x0000 0x5 0x0
+#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX                     0x000C 0x01BC 0x0434 0x6 0x0
+#define MX93_PAD_GPIO_IO00__GPIO2_IO00                            0x0010 0x01C0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO00__LPI2C3_SDA                            0x0010 0x01C0 0x03E4 0x11 0x0
+#define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK                      0x0010 0x01C0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK                     0x0010 0x01C0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO00__LPSPI6_PCS0                           0x0010 0x01C0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO00__LPUART5_TX                            0x0010 0x01C0 0x0434 0x5 0x1
+#define MX93_PAD_GPIO_IO00__LPI2C5_SDA                            0x0010 0x01C0 0x03EC 0x16 0x0
+#define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00                      0x0010 0x01C0 0x036C 0x7 0x0
+#define MX93_PAD_GPIO_IO01__GPIO2_IO01                            0x0014 0x01C4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO01__LPI2C3_SCL                            0x0014 0x01C4 0x03E0 0x11 0x0
+#define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00                   0x0014 0x01C4 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE                      0x0014 0x01C4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO01__LPSPI6_SIN                            0x0014 0x01C4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO01__LPUART5_RX                            0x0014 0x01C4 0x0430 0x5 0x1
+#define MX93_PAD_GPIO_IO01__LPI2C5_SCL                            0x0014 0x01C4 0x03E8 0x16 0x0
+#define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01                      0x0014 0x01C4 0x0370 0x7 0x0
+#define MX93_PAD_GPIO_IO02__GPIO2_IO02                            0x0018 0x01C8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO02__LPI2C4_SDA                            0x0018 0x01C8 0x0000 0x11 0x0
+#define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC                    0x0018 0x01C8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC                   0x0018 0x01C8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO02__LPSPI6_SOUT                           0x0018 0x01C8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B                         0x0018 0x01C8 0x042C 0x5 0x1
+#define MX93_PAD_GPIO_IO02__LPI2C6_SDA                            0x0018 0x01C8 0x03F4 0x16 0x0
+#define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02                      0x0018 0x01C8 0x0374 0x7 0x0
+#define MX93_PAD_GPIO_IO03__GPIO2_IO03                            0x001C 0x01CC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO03__LPI2C4_SCL                            0x001C 0x01CC 0x0000 0x11 0x0
+#define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC                    0x001C 0x01CC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC                   0x001C 0x01CC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO03__LPSPI6_SCK                            0x001C 0x01CC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO03__LPUART5_RTS_B                         0x001C 0x01CC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO03__LPI2C6_SCL                            0x001C 0x01CC 0x03F0 0x16 0x0
+#define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03                      0x001C 0x01CC 0x0378 0x7 0x0
+#define MX93_PAD_GPIO_IO04__GPIO2_IO04                            0x0020 0x01D0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO04__TPM3_CH0                              0x0020 0x01D0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO04__PDM_CLK                               0x0020 0x01D0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00                  0x0020 0x01D0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO04__LPSPI7_PCS0                           0x0020 0x01D0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO04__LPUART6_TX                            0x0020 0x01D0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO04__LPI2C6_SDA                            0x0020 0x01D0 0x03F4 0x16 0x1
+#define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04                      0x0020 0x01D0 0x037C 0x7 0x0
+#define MX93_PAD_GPIO_IO05__GPIO2_IO05                            0x0024 0x01D4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO05__TPM4_CH0                              0x0024 0x01D4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00                      0x0024 0x01D4 0x0438 0x2 0x0
+#define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01                  0x0024 0x01D4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO05__LPSPI7_SIN                            0x0024 0x01D4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO05__LPUART6_RX                            0x0024 0x01D4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO05__LPI2C6_SCL                            0x0024 0x01D4 0x03F0 0x16 0x1
+#define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05                      0x0024 0x01D4 0x0380 0x7 0x0
+#define MX93_PAD_GPIO_IO06__GPIO2_IO06                            0x0028 0x01D8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO06__TPM5_CH0                              0x0028 0x01D8 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01                      0x0028 0x01D8 0x043C 0x2 0x0
+#define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02                  0x0028 0x01D8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO06__LPSPI7_SOUT                           0x0028 0x01D8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO06__LPUART6_CTS_B                         0x0028 0x01D8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO06__LPI2C7_SDA                            0x0028 0x01D8 0x03FC 0x16 0x0
+#define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06                      0x0028 0x01D8 0x0384 0x7 0x0
+#define MX93_PAD_GPIO_IO07__GPIO2_IO07                            0x002C 0x01DC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO07__LPSPI3_PCS1                           0x002C 0x01DC 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA01                   0x002C 0x01DC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03                  0x002C 0x01DC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO07__LPSPI7_SCK                            0x002C 0x01DC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO07__LPUART6_RTS_B                         0x002C 0x01DC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO07__LPI2C7_SCL                            0x002C 0x01DC 0x03F8 0x16 0x0
+#define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07                      0x002C 0x01DC 0x0388 0x7 0x0
+#define MX93_PAD_GPIO_IO08__GPIO2_IO08                            0x0030 0x01E0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO08__LPSPI3_PCS0                           0x0030 0x01E0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA02                   0x0030 0x01E0 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04                  0x0030 0x01E0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO08__TPM6_CH0                              0x0030 0x01E0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO08__LPUART7_TX                            0x0030 0x01E0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO08__LPI2C7_SDA                            0x0030 0x01E0 0x03FC 0x16 0x1
+#define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08                      0x0030 0x01E0 0x038C 0x7 0x0
+#define MX93_PAD_GPIO_IO09__GPIO2_IO09                            0x0034 0x01E4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO09__LPSPI3_SIN                            0x0034 0x01E4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA03                   0x0034 0x01E4 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05                  0x0034 0x01E4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO09__TPM3_EXTCLK                           0x0034 0x01E4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO09__LPUART7_RX                            0x0034 0x01E4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO09__LPI2C7_SCL                            0x0034 0x01E4 0x03F8 0x16 0x1
+#define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09                      0x0034 0x01E4 0x0390 0x7 0x0
+#define MX93_PAD_GPIO_IO10__GPIO2_IO10                            0x0038 0x01E8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO10__LPSPI3_SOUT                           0x0038 0x01E8 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA04                   0x0038 0x01E8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06                  0x0038 0x01E8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO10__TPM4_EXTCLK                           0x0038 0x01E8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO10__LPUART7_CTS_B                         0x0038 0x01E8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO10__LPI2C8_SDA                            0x0038 0x01E8 0x0404 0x16 0x0
+#define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10                      0x0038 0x01E8 0x0394 0x7 0x0
+#define MX93_PAD_GPIO_IO11__GPIO2_IO11                            0x003C 0x01EC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO11__LPSPI3_SCK                            0x003C 0x01EC 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA05                   0x003C 0x01EC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07                  0x003C 0x01EC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO11__TPM5_EXTCLK                           0x003C 0x01EC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO11__LPUART7_RTS_B                         0x003C 0x01EC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO11__LPI2C8_SCL                            0x003C 0x01EC 0x0400 0x16 0x0
+#define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11                      0x003C 0x01EC 0x0398 0x7 0x0
+#define MX93_PAD_GPIO_IO12__GPIO2_IO12                            0x0040 0x01F0 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO12__TPM3_CH2                              0x0040 0x01F0 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02                      0x0040 0x01F0 0x0440 0x2 0x0
+#define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08                  0x0040 0x01F0 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO12__LPSPI8_PCS0                           0x0040 0x01F0 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO12__LPUART8_TX                            0x0040 0x01F0 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO12__LPI2C8_SDA                            0x0040 0x01F0 0x0404 0x16 0x1
+#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC                          0x0040 0x01F0 0x0450 0x7 0x0
+#define MX93_PAD_GPIO_IO13__GPIO2_IO13                            0x0044 0x01F4 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO13__TPM4_CH2                              0x0044 0x01F4 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03                      0x0044 0x01F4 0x0444 0x2 0x0
+#define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09                  0x0044 0x01F4 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO13__LPSPI8_SIN                            0x0044 0x01F4 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO13__LPUART8_RX                            0x0044 0x01F4 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO13__LPI2C8_SCL                            0x0044 0x01F4 0x0400 0x16 0x1
+#define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13                      0x0044 0x01F4 0x039C 0x7 0x0
+#define MX93_PAD_GPIO_IO14__GPIO2_IO14                            0x0048 0x01F8 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO14__LPUART3_TX                            0x0048 0x01F8 0x041C 0x1 0x0
+#define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06                   0x0048 0x01F8 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10                  0x0048 0x01F8 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO14__LPSPI8_SOUT                           0x0048 0x01F8 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO14__LPUART8_CTS_B                         0x0048 0x01F8 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO14__LPUART4_TX                            0x0048 0x01F8 0x0428 0x6 0x0
+#define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14                      0x0048 0x01F8 0x03A0 0x7 0x0
+#define MX93_PAD_GPIO_IO15__GPIO2_IO15                            0x004C 0x01FC 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO15__LPUART3_RX                            0x004C 0x01FC 0x0418 0x1 0x0
+#define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07                   0x004C 0x01FC 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11                  0x004C 0x01FC 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO15__LPSPI8_SCK                            0x004C 0x01FC 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO15__LPUART8_RTS_B                         0x004C 0x01FC 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO15__LPUART4_RX                            0x004C 0x01FC 0x0424 0x6 0x0
+#define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15                      0x004C 0x01FC 0x03A4 0x7 0x0
+#define MX93_PAD_GPIO_IO16__GPIO2_IO16                            0x0050 0x0200 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK                          0x0050 0x0200 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02                      0x0050 0x0200 0x0440 0x2 0x1
+#define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12                  0x0050 0x0200 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B                         0x0050 0x0200 0x0414 0x4 0x0
+#define MX93_PAD_GPIO_IO16__LPSPI4_PCS2                           0x0050 0x0200 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B                         0x0050 0x0200 0x0420 0x6 0x0
+#define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16                      0x0050 0x0200 0x03A8 0x7 0x0
+#define MX93_PAD_GPIO_IO17__GPIO2_IO17                            0x0054 0x0204 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO17__SAI3_MCLK                             0x0054 0x0204 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA08                   0x0054 0x0204 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13                  0x0054 0x0204 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO17__LPUART3_RTS_B                         0x0054 0x0204 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO17__LPSPI4_PCS1                           0x0054 0x0204 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO17__LPUART4_RTS_B                         0x0054 0x0204 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17                      0x0054 0x0204 0x03AC 0x7 0x0
+#define MX93_PAD_GPIO_IO18__GPIO2_IO18                            0x0058 0x0208 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK                          0x0058 0x0208 0x044C 0x1 0x0
+#define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09                   0x0058 0x0208 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14                  0x0058 0x0208 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO18__LPSPI5_PCS0                           0x0058 0x0208 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO18__LPSPI4_PCS0                           0x0058 0x0208 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO18__TPM5_CH2                              0x0058 0x0208 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18                      0x0058 0x0208 0x03B0 0x7 0x0
+#define MX93_PAD_GPIO_IO19__GPIO2_IO19                            0x005C 0x020C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC                          0x005C 0x020C 0x0450 0x1 0x1
+#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03                      0x005C 0x020C 0x0444 0x2 0x1
+#define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15                  0x005C 0x020C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO19__LPSPI5_SIN                            0x005C 0x020C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO19__LPSPI4_SIN                            0x005C 0x020C 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO19__TPM6_CH2                              0x005C 0x020C 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00                        0x005C 0x020C 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO20__GPIO2_IO20                            0x0060 0x0210 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00                        0x0060 0x0210 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00                      0x0060 0x0210 0x0438 0x2 0x1
+#define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16                  0x0060 0x0210 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO20__LPSPI5_SOUT                           0x0060 0x0210 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO20__LPSPI4_SOUT                           0x0060 0x0210 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO20__TPM3_CH1                              0x0060 0x0210 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO20__FLEXIO1_FLEXIO20                      0x0060 0x0210 0x03B4 0x7 0x0
+#define MX93_PAD_GPIO_IO21__GPIO2_IO21                            0x0064 0x0214 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO21__SAI3_TX_DATA00                        0x0064 0x0214 0x0000 0x1 0x0
+#define MX93_PAD_GPIO_IO21__PDM_CLK                               0x0064 0x0214 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17                  0x0064 0x0214 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO21__LPSPI5_SCK                            0x0064 0x0214 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO21__LPSPI4_SCK                            0x0064 0x0214 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO21__TPM4_CH1                              0x0064 0x0214 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK                          0x0064 0x0214 0x044C 0x7 0x1
+#define MX93_PAD_GPIO_IO22__GPIO2_IO22                            0x0068 0x0218 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO22__USDHC3_CLK                            0x0068 0x0218 0x0458 0x1 0x0
+#define MX93_PAD_GPIO_IO22__SPDIF_IN                              0x0068 0x0218 0x0454 0x2 0x0
+#define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18                  0x0068 0x0218 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO22__TPM5_CH1                              0x0068 0x0218 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO22__TPM6_EXTCLK                           0x0068 0x0218 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO22__LPI2C5_SDA                            0x0068 0x0218 0x03EC 0x16 0x1
+#define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22                      0x0068 0x0218 0x03B8 0x7 0x0
+#define MX93_PAD_GPIO_IO23__GPIO2_IO23                            0x006C 0x021C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO23__USDHC3_CMD                            0x006C 0x021C 0x045C 0x1 0x0
+#define MX93_PAD_GPIO_IO23__SPDIF_OUT                             0x006C 0x021C 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19                  0x006C 0x021C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO23__TPM6_CH1                              0x006C 0x021C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO23__LPI2C5_SCL                            0x006C 0x021C 0x03E8 0x16 0x1
+#define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23                      0x006C 0x021C 0x03BC 0x7 0x0
+#define MX93_PAD_GPIO_IO24__GPIO2_IO24                            0x0070 0x0220 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO24__USDHC3_DATA0                          0x0070 0x0220 0x0460 0x1 0x0
+#define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20                  0x0070 0x0220 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO24__TPM3_CH3                              0x0070 0x0220 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO                          0x0070 0x0220 0x0000 0x5 0x0
+#define MX93_PAD_GPIO_IO24__LPSPI6_PCS1                           0x0070 0x0220 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24                      0x0070 0x0220 0x03C0 0x7 0x0
+#define MX93_PAD_GPIO_IO25__GPIO2_IO25                            0x0074 0x0224 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO25__USDHC3_DATA1                          0x0074 0x0224 0x0464 0x1 0x0
+#define MX93_PAD_GPIO_IO25__CAN2_TX                               0x0074 0x0224 0x0000 0x2 0x0
+#define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21                  0x0074 0x0224 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO25__TPM4_CH3                              0x0074 0x0224 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK                          0x0074 0x0224 0x03D4 0x5 0x1
+#define MX93_PAD_GPIO_IO25__LPSPI7_PCS1                           0x0074 0x0224 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25                      0x0074 0x0224 0x03C4 0x7 0x0
+#define MX93_PAD_GPIO_IO26__GPIO2_IO26                            0x0078 0x0228 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO26__USDHC3_DATA2                          0x0078 0x0228 0x0468 0x1 0x0
+#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01                      0x0078 0x0228 0x043C 0x2 0x1
+#define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22                  0x0078 0x0228 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO26__TPM5_CH3                              0x0078 0x0228 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI                          0x0078 0x0228 0x03D8 0x5 0x1
+#define MX93_PAD_GPIO_IO26__LPSPI8_PCS1                           0x0078 0x0228 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC                          0x0078 0x0228 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO27__GPIO2_IO27                            0x007C 0x022C 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO27__USDHC3_DATA3                          0x007C 0x022C 0x046C 0x1 0x0
+#define MX93_PAD_GPIO_IO27__CAN2_RX                               0x007C 0x022C 0x0364 0x2 0x1
+#define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23                  0x007C 0x022C 0x0000 0x3 0x0
+#define MX93_PAD_GPIO_IO27__TPM6_CH3                              0x007C 0x022C 0x0000 0x4 0x0
+#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS                          0x007C 0x022C 0x03DC 0x5 0x1
+#define MX93_PAD_GPIO_IO27__LPSPI5_PCS1                           0x007C 0x022C 0x0000 0x6 0x0
+#define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27                      0x007C 0x022C 0x03C8 0x7 0x0
+#define MX93_PAD_GPIO_IO28__GPIO2_IO28                            0x0080 0x0230 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO28__LPI2C3_SDA                            0x0080 0x0230 0x03E4 0x11 0x1
+#define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28                      0x0080 0x0230 0x0000 0x7 0x0
+#define MX93_PAD_GPIO_IO29__GPIO2_IO29                            0x0084 0x0234 0x0000 0x0 0x0
+#define MX93_PAD_GPIO_IO29__LPI2C3_SCL                            0x0084 0x0234 0x03E0 0x11 0x1
+#define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29                      0x0084 0x0234 0x0000 0x7 0x0
+#define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1                    0x0088 0x0238 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26                      0x0088 0x0238 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO1__GPIO3_IO26                            0x0088 0x0238 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO2__GPIO3_IO27                            0x008C 0x023C 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2                    0x008C 0x023C 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27                      0x008C 0x023C 0x03C8 0x4 0x1
+#define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3                    0x0090 0x0240 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28                      0x0090 0x0240 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO3__GPIO4_IO28                            0x0090 0x0240 0x0000 0x5 0x0
+#define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4                    0x0094 0x0244 0x0000 0x0 0x0
+#define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29                      0x0094 0x0244 0x0000 0x4 0x0
+#define MX93_PAD_CCM_CLKO4__GPIO4_IO29                            0x0094 0x0244 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_MDC__ENET_QOS_MDC                          0x0098 0x0248 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_MDC__LPUART3_DCB_B                         0x0098 0x0248 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_MDC__I3C2_SCL                              0x0098 0x0248 0x03CC 0x2 0x0
+#define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1                       0x0098 0x0248 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00                      0x0098 0x0248 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_MDC__GPIO4_IO00                            0x0098 0x0248 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO                        0x009C 0x024C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B                        0x009C 0x024C 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_MDIO__I3C2_SDA                             0x009C 0x024C 0x03D0 0x2 0x0
+#define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1                     0x009C 0x024C 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01                     0x009C 0x024C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_MDIO__GPIO4_IO01                           0x009C 0x024C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                    0x00A0 0x0250 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD3__CAN2_TX                               0x00A0 0x0250 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_TD3__HSIOMIX_OTG_ID2                       0x00A0 0x0250 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD3__FLEXIO2_FLEXIO02                      0x00A0 0x0250 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD3__GPIO4_IO02                            0x00A0 0x0250 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                    0x00A4 0x0254 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK   0x00A4 0x0254 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TD2__CAN2_RX                               0x00A4 0x0254 0x0364 0x2 0x2
+#define MX93_PAD_ENET1_TD2__HSIOMIX_OTG_OC2                       0x00A4 0x0254 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD2__FLEXIO2_FLEXIO03                      0x00A4 0x0254 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD2__GPIO4_IO03                            0x00A4 0x0254 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1                    0x00A8 0x0258 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD1__LPUART3_RTS_B                         0x00A8 0x0258 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TD1__I3C2_PUR                              0x00A8 0x0258 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_TD1__HSIOMIX_OTG_OC1                       0x00A8 0x0258 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_TD1__FLEXIO2_FLEXIO04                      0x00A8 0x0258 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD1__GPIO4_IO04                            0x00A8 0x0258 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TD1__I3C2_PUR_B                            0x00A8 0x0258 0x0000 0x6 0x0
+#define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                    0x00AC 0x025C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TD0__LPUART3_TX                            0x00AC 0x025C 0x041C 0x1 0x1
+#define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05                      0x00AC 0x025C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TD0__GPIO4_IO05                            0x00AC 0x025C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL              0x00B0 0x0260 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TX_CTL__LPUART3_DTR_B                      0x00B0 0x0260 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO06                   0x00B0 0x0260 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TX_CTL__GPIO4_IO06                         0x00B0 0x0260 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK    0x00B4 0x0264 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_TXC__ENET_QOS_TX_ER                        0x00B4 0x0264 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_TXC__FLEXIO2_FLEXIO07                      0x00B4 0x0264 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_TXC__GPIO4_IO07                            0x00B4 0x0264 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL              0x00B8 0x0268 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RX_CTL__LPUART3_DSR_B                      0x00B8 0x0268 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2                   0x00B8 0x0268 0x0000 0x3 0x0
+#define MX93_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO08                   0x00B8 0x0268 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RX_CTL__GPIO4_IO08                         0x00B8 0x0268 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK    0x00BC 0x026C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER                        0x00BC 0x026C 0x0000 0x1 0x0
+#define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09                      0x00BC 0x026C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RXC__GPIO4_IO09                            0x00BC 0x026C 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                    0x00C0 0x0270 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD0__LPUART3_RX                            0x00C0 0x0270 0x0418 0x1 0x1
+#define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10                      0x00C0 0x0270 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD0__GPIO4_IO10                            0x00C0 0x0270 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                    0x00C4 0x0274 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B                         0x00C4 0x0274 0x0414 0x1 0x1
+#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1                           0x00C4 0x0274 0x0408 0x3 0x0
+#define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11                      0x00C4 0x0274 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD1__GPIO4_IO11                            0x00C4 0x0274 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                    0x00C8 0x0278 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2                           0x00C8 0x0278 0x040C 0x3 0x0
+#define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12                      0x00C8 0x0278 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD2__GPIO4_IO12                            0x00C8 0x0278 0x0000 0x5 0x0
+#define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                    0x00CC 0x027C 0x0000 0x0 0x0
+#define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER               0x00CC 0x027C 0x0000 0x2 0x0
+#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3                           0x00CC 0x027C 0x0410 0x3 0x0
+#define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13                      0x00CC 0x027C 0x0000 0x4 0x0
+#define MX93_PAD_ENET1_RD3__GPIO4_IO13                            0x00CC 0x027C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_MDC__ENET1_MDC                             0x00D0 0x0280 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_MDC__LPUART4_DCB_B                         0x00D0 0x0280 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_MDC__SAI2_RX_SYNC                          0x00D0 0x0280 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_MDC__FLEXIO2_FLEXIO14                      0x00D0 0x0280 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_MDC__GPIO4_IO14                            0x00D0 0x0280 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_MDIO__ENET1_MDIO                           0x00D4 0x0284 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_MDIO__LPUART4_RIN_B                        0x00D4 0x0284 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_MDIO__SAI2_RX_BCLK                         0x00D4 0x0284 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15                     0x00D4 0x0284 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_MDIO__GPIO4_IO15                           0x00D4 0x0284 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD3__SAI2_RX_DATA00                        0x00D8 0x0288 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD3__FLEXIO2_FLEXIO16                      0x00D8 0x0288 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD3__GPIO4_IO16                            0x00D8 0x0288 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3                       0x00D8 0x0288 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2                       0x00DC 0x028C 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD2__ENET1_TX_CLK                          0x00DC 0x028C 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TD2__SAI2_RX_DATA01                        0x00DC 0x028C 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD2__FLEXIO2_FLEXIO17                      0x00DC 0x028C 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD2__GPIO4_IO17                            0x00DC 0x028C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1                       0x00E0 0x0290 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD1__LPUART4_RTS_B                         0x00E0 0x0290 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TD1__SAI2_RX_DATA02                        0x00E0 0x0290 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18                      0x00E0 0x0290 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD1__GPIO4_IO18                            0x00E0 0x0290 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0                       0x00E4 0x0294 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TD0__LPUART4_TX                            0x00E4 0x0294 0x0428 0x1 0x1
+#define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03                        0x00E4 0x0294 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19                      0x00E4 0x0294 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TD0__GPIO4_IO19                            0x00E4 0x0294 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL                 0x00E8 0x0298 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TX_CTL__LPUART4_DTR_B                      0x00E8 0x0298 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TX_CTL__SAI2_TX_SYNC                       0x00E8 0x0298 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20                   0x00E8 0x0298 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TX_CTL__GPIO4_IO20                         0x00E8 0x0298 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC                       0x00EC 0x029C 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_TXC__ENET1_TX_ER                           0x00EC 0x029C 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_TXC__SAI2_TX_BCLK                          0x00EC 0x029C 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_TXC__FLEXIO2_FLEXIO21                      0x00EC 0x029C 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_TXC__GPIO4_IO21                            0x00EC 0x029C 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL                 0x00F0 0x02A0 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RX_CTL__LPUART4_DSR_B                      0x00F0 0x02A0 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RX_CTL__SAI2_TX_DATA00                     0x00F0 0x02A0 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22                   0x00F0 0x02A0 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RX_CTL__GPIO4_IO22                         0x00F0 0x02A0 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC                       0x00F4 0x02A4 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RXC__ENET1_RX_ER                           0x00F4 0x02A4 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RXC__SAI2_TX_DATA01                        0x00F4 0x02A4 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23                      0x00F4 0x02A4 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RXC__GPIO4_IO23                            0x00F4 0x02A4 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0                       0x00F8 0x02A8 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD0__LPUART4_RX                            0x00F8 0x02A8 0x0424 0x1 0x1
+#define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02                        0x00F8 0x02A8 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24                      0x00F8 0x02A8 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD0__GPIO4_IO24                            0x00F8 0x02A8 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1                       0x00FC 0x02AC 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD1__SPDIF_IN                              0x00FC 0x02AC 0x0454 0x1 0x1
+#define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03                        0x00FC 0x02AC 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25                      0x00FC 0x02AC 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD1__GPIO4_IO25                            0x00FC 0x02AC 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2                       0x0100 0x02B0 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B                         0x0100 0x02B0 0x0420 0x1 0x1
+#define MX93_PAD_ENET2_RD2__SAI2_MCLK                             0x0100 0x02B0 0x0000 0x2 0x0
+#define MX93_PAD_ENET2_RD2__MQS2_RIGHT                            0x0100 0x02B0 0x0000 0x3 0x0
+#define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26                      0x0100 0x02B0 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD2__GPIO4_IO26                            0x0100 0x02B0 0x0000 0x5 0x0
+#define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3                       0x0104 0x02B4 0x0000 0x0 0x0
+#define MX93_PAD_ENET2_RD3__SPDIF_OUT                             0x0104 0x02B4 0x0000 0x1 0x0
+#define MX93_PAD_ENET2_RD3__SPDIF_IN                              0x0104 0x02B4 0x0454 0x2 0x2
+#define MX93_PAD_ENET2_RD3__MQS2_LEFT                             0x0104 0x02B4 0x0000 0x3 0x0
+#define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27                      0x0104 0x02B4 0x0000 0x4 0x0
+#define MX93_PAD_ENET2_RD3__GPIO4_IO27                            0x0104 0x02B4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_CLK__FLEXIO1_FLEXIO08                        0x0108 0x02B8 0x038C 0x4 0x1
+#define MX93_PAD_SD1_CLK__GPIO3_IO08                              0x0108 0x02B8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_CLK__USDHC1_CLK                              0x0108 0x02B8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_CMD__USDHC1_CMD                              0x010C 0x02BC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_CMD__FLEXIO1_FLEXIO09                        0x010C 0x02BC 0x0390 0x4 0x1
+#define MX93_PAD_SD1_CMD__GPIO3_IO09                              0x010C 0x02BC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA0__USDHC1_DATA0                          0x0110 0x02C0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA0__FLEXIO1_FLEXIO10                      0x0110 0x02C0 0x0394 0x4 0x1
+#define MX93_PAD_SD1_DATA0__GPIO3_IO10                            0x0110 0x02C0 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA1__USDHC1_DATA1                          0x0114 0x02C4 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA1__FLEXIO1_FLEXIO11                      0x0114 0x02C4 0x0398 0x4 0x1
+#define MX93_PAD_SD1_DATA1__GPIO3_IO11                            0x0114 0x02C4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT                 0x0114 0x02C4 0x0000 0x6 0x0
+#define MX93_PAD_SD1_DATA2__USDHC1_DATA2                          0x0118 0x02C8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA2__FLEXIO1_FLEXIO12                      0x0118 0x02C8 0x0000 0x4 0x0
+#define MX93_PAD_SD1_DATA2__GPIO3_IO12                            0x0118 0x02C8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY               0x0118 0x02C8 0x0000 0x6 0x0
+#define MX93_PAD_SD1_DATA3__USDHC1_DATA3                          0x011C 0x02CC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                      0x011C 0x02CC 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA3__FLEXIO1_FLEXIO13                      0x011C 0x02CC 0x039C 0x4 0x1
+#define MX93_PAD_SD1_DATA3__GPIO3_IO13                            0x011C 0x02CC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA4__USDHC1_DATA4                          0x0120 0x02D0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04                     0x0120 0x02D0 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA4__FLEXIO1_FLEXIO14                      0x0120 0x02D0 0x03A0 0x4 0x1
+#define MX93_PAD_SD1_DATA4__GPIO3_IO14                            0x0120 0x02D0 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA5__USDHC1_DATA5                          0x0124 0x02D4 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05                     0x0124 0x02D4 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA5__USDHC1_RESET_B                        0x0124 0x02D4 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA5__FLEXIO1_FLEXIO15                      0x0124 0x02D4 0x03A4 0x4 0x1
+#define MX93_PAD_SD1_DATA5__GPIO3_IO15                            0x0124 0x02D4 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA6__USDHC1_DATA6                          0x0128 0x02D8 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06                     0x0128 0x02D8 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA6__USDHC1_CD_B                           0x0128 0x02D8 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA6__FLEXIO1_FLEXIO16                      0x0128 0x02D8 0x03A8 0x4 0x1
+#define MX93_PAD_SD1_DATA6__GPIO3_IO16                            0x0128 0x02D8 0x0000 0x5 0x0
+#define MX93_PAD_SD1_DATA7__USDHC1_DATA7                          0x012C 0x02DC 0x0000 0x0 0x0
+#define MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07                     0x012C 0x02DC 0x0000 0x1 0x0
+#define MX93_PAD_SD1_DATA7__USDHC1_WP                             0x012C 0x02DC 0x0000 0x2 0x0
+#define MX93_PAD_SD1_DATA7__FLEXIO1_FLEXIO17                      0x012C 0x02DC 0x03AC 0x4 0x1
+#define MX93_PAD_SD1_DATA7__GPIO3_IO17                            0x012C 0x02DC 0x0000 0x5 0x0
+#define MX93_PAD_SD1_STROBE__USDHC1_STROBE                        0x0130 0x02E0 0x0000 0x0 0x0
+#define MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS                       0x0130 0x02E0 0x0000 0x1 0x0
+#define MX93_PAD_SD1_STROBE__FLEXIO1_FLEXIO18                     0x0130 0x02E0 0x03B0 0x4 0x1
+#define MX93_PAD_SD1_STROBE__GPIO3_IO18                           0x0130 0x02E0 0x0000 0x5 0x0
+#define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT                      0x0134 0x02E4 0x0000 0x0 0x0
+#define MX93_PAD_SD2_VSELECT__USDHC2_WP                           0x0134 0x02E4 0x0000 0x1 0x0
+#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3                         0x0134 0x02E4 0x0410 0x2 0x1
+#define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19                    0x0134 0x02E4 0x0000 0x4 0x0
+#define MX93_PAD_SD2_VSELECT__GPIO3_IO19                          0x0134 0x02E4 0x0000 0x5 0x0
+#define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1               0x0134 0x02E4 0x0368 0x6 0x0
+#define MX93_PAD_SD3_CLK__USDHC3_CLK                              0x0138 0x02E8 0x0458 0x0 0x1
+#define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK                         0x0138 0x02E8 0x0000 0x1 0x0
+#define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20                        0x0138 0x02E8 0x03B4 0x4 0x1
+#define MX93_PAD_SD3_CLK__GPIO3_IO20                              0x0138 0x02E8 0x0000 0x5 0x0
+#define MX93_PAD_SD3_CMD__USDHC3_CMD                              0x013C 0x02EC 0x045C 0x0 0x1
+#define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                        0x013C 0x02EC 0x0000 0x1 0x0
+#define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21                        0x013C 0x02EC 0x0000 0x4 0x0
+#define MX93_PAD_SD3_CMD__GPIO3_IO21                              0x013C 0x02EC 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA0__USDHC3_DATA0                          0x0140 0x02F0 0x0460 0x0 0x1
+#define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00                     0x0140 0x02F0 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22                      0x0140 0x02F0 0x03B8 0x4 0x1
+#define MX93_PAD_SD3_DATA0__GPIO3_IO22                            0x0140 0x02F0 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA1__USDHC3_DATA1                          0x0144 0x02F4 0x0464 0x0 0x1
+#define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01                     0x0144 0x02F4 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23                      0x0144 0x02F4 0x03BC 0x4 0x1
+#define MX93_PAD_SD3_DATA1__GPIO3_IO23                            0x0144 0x02F4 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA2__USDHC3_DATA2                          0x0148 0x02F8 0x0468 0x0 0x1
+#define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02                     0x0148 0x02F8 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24                      0x0148 0x02F8 0x03C0 0x4 0x1
+#define MX93_PAD_SD3_DATA2__GPIO3_IO24                            0x0148 0x02F8 0x0000 0x5 0x0
+#define MX93_PAD_SD3_DATA3__USDHC3_DATA3                          0x014C 0x02FC 0x046C 0x0 0x1
+#define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03                     0x014C 0x02FC 0x0000 0x1 0x0
+#define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25                      0x014C 0x02FC 0x03C4 0x4 0x1
+#define MX93_PAD_SD3_DATA3__GPIO3_IO25                            0x014C 0x02FC 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CD_B__USDHC2_CD_B                            0x0150 0x0300 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN                0x0150 0x0300 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CD_B__I3C2_SCL                               0x0150 0x0300 0x03CC 0x2 0x1
+#define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00                       0x0150 0x0300 0x036C 0x4 0x1
+#define MX93_PAD_SD2_CD_B__GPIO3_IO00                             0x0150 0x0300 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CLK__USDHC2_CLK                              0x0154 0x0304 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT                0x0154 0x0304 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CLK__I3C2_SDA                                0x0154 0x0304 0x03D0 0x2 0x1
+#define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01                        0x0154 0x0304 0x0370 0x4 0x1
+#define MX93_PAD_SD2_CLK__GPIO3_IO01                              0x0154 0x0304 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                   0x0154 0x0304 0x0000 0x6 0x0
+#define MX93_PAD_SD2_CMD__USDHC2_CMD                              0x0158 0x0308 0x0000 0x0 0x0
+#define MX93_PAD_SD2_CMD__ENET1_1588_EVENT0_IN                    0x0158 0x0308 0x0000 0x1 0x0
+#define MX93_PAD_SD2_CMD__I3C2_PUR                                0x0158 0x0308 0x0000 0x2 0x0
+#define MX93_PAD_SD2_CMD__I3C2_PUR_B                              0x0158 0x0308 0x0000 0x3 0x0
+#define MX93_PAD_SD2_CMD__FLEXIO1_FLEXIO02                        0x0158 0x0308 0x0374 0x4 0x1
+#define MX93_PAD_SD2_CMD__GPIO3_IO02                              0x0158 0x0308 0x0000 0x5 0x0
+#define MX93_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                   0x0158 0x0308 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA0__USDHC2_DATA0                          0x015C 0x030C 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA0__ENET1_1588_EVENT0_OUT                 0x015C 0x030C 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA0__CAN2_TX                               0x015C 0x030C 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA0__FLEXIO1_FLEXIO03                      0x015C 0x030C 0x0378 0x4 0x1
+#define MX93_PAD_SD2_DATA0__GPIO3_IO03                            0x015C 0x030C 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                 0x015C 0x030C 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA1__USDHC2_DATA1                          0x0160 0x0310 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA1__ENET1_1588_EVENT1_IN                  0x0160 0x0310 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA1__CAN2_RX                               0x0160 0x0310 0x0364 0x2 0x3
+#define MX93_PAD_SD2_DATA1__FLEXIO1_FLEXIO04                      0x0160 0x0310 0x037C 0x4 0x1
+#define MX93_PAD_SD2_DATA1__GPIO3_IO04                            0x0160 0x0310 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                     0x0160 0x0310 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA2__USDHC2_DATA2                          0x0164 0x0314 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA2__ENET1_1588_EVENT1_OUT                 0x0164 0x0314 0x0000 0x1 0x0
+#define MX93_PAD_SD2_DATA2__MQS2_RIGHT                            0x0164 0x0314 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA2__FLEXIO1_FLEXIO05                      0x0164 0x0314 0x0380 0x4 0x1
+#define MX93_PAD_SD2_DATA2__GPIO3_IO05                            0x0164 0x0314 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                     0x0164 0x0314 0x0000 0x6 0x0
+#define MX93_PAD_SD2_DATA3__USDHC2_DATA3                          0x0168 0x0318 0x0000 0x0 0x0
+#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1                           0x0168 0x0318 0x0408 0x1 0x1
+#define MX93_PAD_SD2_DATA3__MQS2_LEFT                             0x0168 0x0318 0x0000 0x2 0x0
+#define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06                      0x0168 0x0318 0x0384 0x4 0x1
+#define MX93_PAD_SD2_DATA3__GPIO3_IO06                            0x0168 0x0318 0x0000 0x5 0x0
+#define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET              0x0168 0x0318 0x0000 0x6 0x0
+#define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B                      0x016C 0x031C 0x0000 0x0 0x0
+#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2                         0x016C 0x031C 0x040C 0x1 0x1
+#define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07                    0x016C 0x031C 0x0388 0x4 0x1
+#define MX93_PAD_SD2_RESET_B__GPIO3_IO07                          0x016C 0x031C 0x0000 0x5 0x0
+#define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET           0x016C 0x031C 0x0000 0x6 0x0
+#define MX93_PAD_I2C1_SCL__LPI2C1_SCL                             0x0170 0x0320 0x0000 0x10 0x0
+#define MX93_PAD_I2C1_SCL__I3C1_SCL                               0x0170 0x0320 0x0000 0x1 0x0
+#define MX93_PAD_I2C1_SCL__LPUART1_DCB_B                          0x0170 0x0320 0x0000 0x2 0x0
+#define MX93_PAD_I2C1_SCL__TPM2_CH0                               0x0170 0x0320 0x0000 0x3 0x0
+#define MX93_PAD_I2C1_SCL__GPIO1_IO00                             0x0170 0x0320 0x0000 0x5 0x0
+#define MX93_PAD_I2C1_SDA__LPI2C1_SDA                             0x0174 0x0324 0x0000 0x10 0x0
+#define MX93_PAD_I2C1_SDA__I3C1_SDA                               0x0174 0x0324 0x0000 0x1 0x0
+#define MX93_PAD_I2C1_SDA__LPUART1_RIN_B                          0x0174 0x0324 0x0000 0x2 0x0
+#define MX93_PAD_I2C1_SDA__TPM2_CH1                               0x0174 0x0324 0x0000 0x3 0x0
+#define MX93_PAD_I2C1_SDA__GPIO1_IO01                             0x0174 0x0324 0x0000 0x5 0x0
+#define MX93_PAD_I2C2_SCL__LPI2C2_SCL                             0x0178 0x0328 0x0000 0x10 0x0
+#define MX93_PAD_I2C2_SCL__I3C1_PUR                               0x0178 0x0328 0x0000 0x1 0x0
+#define MX93_PAD_I2C2_SCL__LPUART2_DCB_B                          0x0178 0x0328 0x0000 0x2 0x0
+#define MX93_PAD_I2C2_SCL__TPM2_CH2                               0x0178 0x0328 0x0000 0x3 0x0
+#define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC                           0x0178 0x0328 0x0000 0x4 0x0
+#define MX93_PAD_I2C2_SCL__GPIO1_IO02                             0x0178 0x0328 0x0000 0x5 0x0
+#define MX93_PAD_I2C2_SCL__I3C1_PUR_B                             0x0178 0x0328 0x0000 0x6 0x0
+#define MX93_PAD_I2C2_SDA__LPI2C2_SDA                             0x017C 0x032C 0x0000 0x10 0x0
+#define MX93_PAD_I2C2_SDA__LPUART2_RIN_B                          0x017C 0x032C 0x0000 0x2 0x0
+#define MX93_PAD_I2C2_SDA__TPM2_CH3                               0x017C 0x032C 0x0000 0x3 0x0
+#define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK                           0x017C 0x032C 0x0000 0x4 0x0
+#define MX93_PAD_I2C2_SDA__GPIO1_IO03                             0x017C 0x032C 0x0000 0x5 0x0
+#define MX93_PAD_UART1_RXD__LPUART1_RX                            0x0180 0x0330 0x0000 0x0 0x0
+#define MX93_PAD_UART1_RXD__S400_UART_RX                          0x0180 0x0330 0x0000 0x1 0x0
+#define MX93_PAD_UART1_RXD__LPSPI2_SIN                            0x0180 0x0330 0x0000 0x2 0x0
+#define MX93_PAD_UART1_RXD__TPM1_CH0                              0x0180 0x0330 0x0000 0x3 0x0
+#define MX93_PAD_UART1_RXD__GPIO1_IO04                            0x0180 0x0330 0x0000 0x5 0x0
+#define MX93_PAD_UART1_TXD__LPUART1_TX                            0x0184 0x0334 0x0000 0x0 0x0
+#define MX93_PAD_UART1_TXD__S400_UART_TX                          0x0184 0x0334 0x0000 0x1 0x0
+#define MX93_PAD_UART1_TXD__LPSPI2_PCS0                           0x0184 0x0334 0x0000 0x2 0x0
+#define MX93_PAD_UART1_TXD__TPM1_CH1                              0x0184 0x0334 0x0000 0x3 0x0
+#define MX93_PAD_UART1_TXD__GPIO1_IO05                            0x0184 0x0334 0x0000 0x5 0x0
+#define MX93_PAD_UART2_RXD__LPUART2_RX                            0x0188 0x0338 0x0000 0x0 0x0
+#define MX93_PAD_UART2_RXD__LPUART1_CTS_B                         0x0188 0x0338 0x0000 0x1 0x0
+#define MX93_PAD_UART2_RXD__LPSPI2_SOUT                           0x0188 0x0338 0x0000 0x2 0x0
+#define MX93_PAD_UART2_RXD__TPM1_CH2                              0x0188 0x0338 0x0000 0x3 0x0
+#define MX93_PAD_UART2_RXD__SAI1_MCLK                             0x0188 0x0338 0x0448 0x4 0x0
+#define MX93_PAD_UART2_RXD__GPIO1_IO06                            0x0188 0x0338 0x0000 0x5 0x0
+#define MX93_PAD_UART2_TXD__LPUART2_TX                            0x018C 0x033C 0x0000 0x0 0x0
+#define MX93_PAD_UART2_TXD__LPUART1_RTS_B                         0x018C 0x033C 0x0000 0x1 0x0
+#define MX93_PAD_UART2_TXD__LPSPI2_SCK                            0x018C 0x033C 0x0000 0x2 0x0
+#define MX93_PAD_UART2_TXD__TPM1_CH3                              0x018C 0x033C 0x0000 0x3 0x0
+#define MX93_PAD_UART2_TXD__GPIO1_IO07                            0x018C 0x033C 0x0000 0x5 0x0
+#define MX93_PAD_PDM_CLK__PDM_CLK                                 0x0190 0x0340 0x0000 0x0 0x0
+#define MX93_PAD_PDM_CLK__MQS1_LEFT                               0x0190 0x0340 0x0000 0x1 0x0
+#define MX93_PAD_PDM_CLK__LPTMR1_ALT1                             0x0190 0x0340 0x0000 0x4 0x0
+#define MX93_PAD_PDM_CLK__GPIO1_IO08                              0x0190 0x0340 0x0000 0x5 0x0
+#define MX93_PAD_PDM_CLK__CAN1_TX                                 0x0190 0x0340 0x0000 0x6 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00                0x0194 0x0344 0x0438 0x0 0x2
+#define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT                      0x0194 0x0344 0x0000 0x1 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1                     0x0194 0x0344 0x0000 0x2 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK                     0x0194 0x0344 0x0000 0x3 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2                     0x0194 0x0344 0x0000 0x4 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09                      0x0194 0x0344 0x0000 0x5 0x0
+#define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX                         0x0194 0x0344 0x0360 0x6 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01                0x0198 0x0348 0x043C 0x0 0x2
+#define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI                    0x0198 0x0348 0x0000 0x1 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1                     0x0198 0x0348 0x0000 0x2 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK                     0x0198 0x0348 0x0000 0x3 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3                     0x0198 0x0348 0x0000 0x4 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10                      0x0198 0x0348 0x0000 0x5 0x0
+#define MX93_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1           0x0198 0x0348 0x0368 0x6 0x1
+#define MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC                          0x019C 0x034C 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXFS__SAI1_TX_DATA01                        0x019C 0x034C 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXFS__LPSPI1_PCS0                           0x019C 0x034C 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXFS__LPUART2_DTR_B                         0x019C 0x034C 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXFS__MQS1_LEFT                             0x019C 0x034C 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_TXFS__GPIO1_IO11                            0x019C 0x034C 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_TXC__SAI1_TX_BCLK                           0x01A0 0x0350 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXC__LPUART2_CTS_B                          0x01A0 0x0350 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXC__LPSPI1_SIN                             0x01A0 0x0350 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXC__LPUART1_DSR_B                          0x01A0 0x0350 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXC__CAN1_RX                                0x01A0 0x0350 0x0360 0x4 0x1
+#define MX93_PAD_SAI1_TXC__GPIO1_IO12                             0x01A0 0x0350 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00                        0x01A4 0x0354 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_TXD0__LPUART2_RTS_B                         0x01A4 0x0354 0x0000 0x1 0x0
+#define MX93_PAD_SAI1_TXD0__LPSPI1_SCK                            0x01A4 0x0354 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_TXD0__LPUART1_DTR_B                         0x01A4 0x0354 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_TXD0__CAN1_TX                               0x01A4 0x0354 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_TXD0__GPIO1_IO13                            0x01A4 0x0354 0x0000 0x5 0x0
+#define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00                        0x01A8 0x0358 0x0000 0x0 0x0
+#define MX93_PAD_SAI1_RXD0__SAI1_MCLK                             0x01A8 0x0358 0x0448 0x1 0x1
+#define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT                           0x01A8 0x0358 0x0000 0x2 0x0
+#define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B                         0x01A8 0x0358 0x0000 0x3 0x0
+#define MX93_PAD_SAI1_RXD0__MQS1_RIGHT                            0x01A8 0x0358 0x0000 0x4 0x0
+#define MX93_PAD_SAI1_RXD0__GPIO1_IO14                            0x01A8 0x0358 0x0000 0x5 0x0
+#define MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY                         0x01AC 0x035C 0x0000 0x0 0x0
+#define MX93_PAD_WDOG_ANY__GPIO1_IO15                             0x01AC 0x035C 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX93_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
new file mode 100644
index 000000000..3c5c67ebe
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx93-tqma9352.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
+	compatible = "tq,imx93-tqma9352-mba93xxla",
+		     "tq,imx93-tqma9352", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm5 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	clk_dp: clk-dp {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_3v8: regulator-3v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V8";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/* TODO: this is supply for IOT module */
+		regulator-always-on;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	expander-irq-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PEX_INT#";
+	};
+
+	rtc-irq-hog {
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "RTC_EVENT#";
+	};
+};
+
+&gpio3 {
+	ethphy-eqos-irq-hog {
+		gpio-hog;
+		gpios = <26 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "ENET0_IRQ#";
+	};
+
+	ethphy-fec-irq-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "ENET1_IRQ#";
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "3V8_EN", "",
+				  "", "IOT_PWRKEY",
+				  "IOT_RESET", "IOT_W_DISABLE",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		/*
+		 * Controls the IOT W_DISABLE pin which is low active
+		 * as disable signal but inverted as seen from the CPU.
+		 * The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		iot_wdisable_hog: iot-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "IOT_W_DISABLE";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BL_EN", "DP_EN",
+				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpi2c5 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c5>;
+	pinctrl-1 = <&pinctrl_lpi2c5>;
+	status = "okay";
+
+	dp_bridge: dp-bridge@f {
+		compatible = "toshiba,tc9595", "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tc9595>;
+		clock-names = "ref";
+		clocks = <&clk_dp>;
+		reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+		toshiba,hpd-pin = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp_dsi_in: endpoint {
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+/* disabled per default, console for M33 */
+&lpuart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "disabled";
+};
+
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&lpuart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# is connected on MBa93xxLA */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&tpm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm5>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
+		>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
+			/* PD | FSEL_2 | DSE X6 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
+			/* PD | FSEL_3 | DSE X6 */
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
+			/* PD | FSEL_2 | DSE X4 */
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
+			/* PD | FSEL_3 | DSE X3 */
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
+		>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c5: lpi2c5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
+			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
+		>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <
+			MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1306
+		>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = <
+			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
+		>;
+	};
+
+	pinctrl_tc9595: tc9595-grp {
+		fsl,pins = <
+			/* DP_IRQ */
+			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x1306
+		>;
+	};
+
+	pinctrl_tpm5: tpm5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
+		>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
+			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
+			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
+			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
+			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X5 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			/* HYS | PD | PU | FSEL_3 | DSE X3 */
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = <
+			/* HYS | PD | PU | FSEL_3 | DSE X6 */
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
+			/* HYS | PD | PU | FSEL_3 | DSE X4 */
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
+			/* PD | PU | FSEL_2 | DSE X3 */
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
new file mode 100644
index 000000000..f6e422dc2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ */
+
+#include "imx93.dtsi"
+
+/{
+	model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
+	compatible = "tq,imx93-tqma9352", "fsl,imx93";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x60000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_v1v8: regulator-v1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_v3v3: regulator-v3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_v3v3>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_v1v8>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX93_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&gpio1 {
+	pmic-irq-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "PMIC_IRQ#";
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_v3v3>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&reg_v3v3>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x5f>;
+		size = <32>;
+		pagesize = <32>;
+		vcc-supply = <&reg_v3v3>;
+	};
+
+	imu@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&reg_v3v3>;
+		vddio-supply = <&reg_v3v3>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B	0x3fe
+			MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK	0x3fe
+			MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00	0x3fe
+			MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01	0x3fe
+			MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02	0x3fe
+			MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03	0x3fe
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SDA__GPIO1_IO03		0x1306
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07	0x1306
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			/* HYS | PU | PD | FSEL_3 | X5 */
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x17be
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x17be
+			/* HYS | PU | FSEL_3 | X5 */
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13be
+			/* HYS | PU | FSEL_3 | X4 */
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x139e
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x139e
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x139e
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x139e
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x139e
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x139e
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x139e
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x139e
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY	0x31e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
new file mode 100644
index 000000000..943b7e665
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -0,0 +1,928 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+
+		A55_1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48040000 0 0xc0000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x80000000>,
+			 <0x28000000 0x0 0x28000000 0x10000000>;
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aonmix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
+			mu1: mailbox@44230000 {
+				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+				reg = <0x44230000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			wdog1: watchdog@442d0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442d0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@442e0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442e0000 0x10000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_CAN1_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@443c0000 {
+				compatible = "fsl,imx93-iomuxc";
+				reg = <0x443c0000 0x10000>;
+				status = "okay";
+			};
+
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
+			clk: clock-controller@44450000 {
+				compatible = "fsl,imx93-ccm";
+				reg = <0x44450000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				status = "okay";
+			};
+
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mlmix: power-domain@44461800 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44461800 0x400>, <0x44464800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_ML_APB>,
+						 <&clk IMX93_CLK_ML>;
+				};
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+			};
+
+			anatop: anatop@44480000 {
+				compatible = "fsl,imx93-anatop", "syscon";
+				reg = <0x44480000 0x2000>;
+			};
+
+			tmu: tmu@44482000 {
+				compatible = "fsl,qoriq-tmu";
+				reg = <0x44482000 0x1000>;
+				clocks = <&clk IMX93_CLK_TMC_GATE>;
+				little-endian;
+				fsl,tmu-range = <0x800000da 0x800000e9
+						 0x80000102 0x8000012a
+						 0x80000166 0x800001a7
+						 0x800001b6>;
+				fsl,tmu-calibration = <0x00000000 0x0000000e
+						       0x00000001 0x00000029
+						       0x00000002 0x00000056
+						       0x00000003 0x000000a2
+						       0x00000004 0x00000116
+						       0x00000005 0x00000195
+						       0x00000006 0x000001b2>;
+				#thermal-sensor-cells = <1>;
+			};
+
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ADC1_GATE>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
+			mu2: mailbox@42440000 {
+				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+				reg = <0x42440000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+				#mbox-cells = <2>;
+				status = "disabled";
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@424a0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424a0000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog5: watchdog@424b0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424b0000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_CAN2_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				status = "disabled";
+			};
+
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC1_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <8>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC2_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			fec: ethernet@42890000 {
+				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x42890000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER1>,
+					 <&clk IMX93_CLK_ENET_REF>,
+					 <&clk IMX93_CLK_ENET_REF_PHY>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+						  <&clk IMX93_CLK_ENET_REF>,
+						  <&clk IMX93_CLK_ENET_REF_PHY>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				status = "disabled";
+			};
+
+			eqos: ethernet@428a0000 {
+				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x428a0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER2>,
+					 <&clk IMX93_CLK_ENET>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+						  <&clk IMX93_CLK_ENET>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>;
+				intf_mode = <&wakeupmix_gpr 0x28>;
+				snps,clk-csr = <0>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x43810080 0x1000>, <0x43810040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 4 30>;
+		};
+
+		gpio3: gpio@43820080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x43820080 0x1000>, <0x43820040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+		};
+
+		gpio4: gpio@43830080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x43830080 0x1000>, <0x43830040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+		};
+
+		gpio1: gpio@47400080 {
+			compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio";
+			reg = <0x47400080 0x1000>, <0x47400040 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 92 16>;
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx93-ocotp", "syscon";
+			reg = <0x47510000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		ddr-pmu@4e300dc0 {
+			compatible = "fsl,imx93-ddr-pmu";
+			reg = <0x4e300dc0 0x200>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
new file mode 100644
index 000000000..8a9fe5cdc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2020-2021 TQ-Systems GmbH
+ */
+
+#include <dt-bindings/net/ti-dp83867.h>
+
+/* TQ-Systems GmbH MBa8Mx baseboard */
+
+/ {
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm4 0 250000 0>;
+		beeper-hz = <4000>;
+		amp-supply = <&reg_vcc_3v3>;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobutton>;
+		autorepeat;
+
+		switch-1 {
+			label = "switch1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		btn2: switch-2 {
+			label = "switch2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "switch3";
+			linux,code = <BTN_2>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio_leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2: led2 {
+			label = "led2";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_hub_vbus: regulator-hub-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_HUB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sn65dsi83_1v8: regulator-sn65dsi83-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "SN65DSI83_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MBA8MX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&sai3>;
+		audio-codec = <&tlv320aic3x04>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vcc_3v3>;
+	fsl,magic-packet;
+	mac-address = [ 00 00 00 00 00 00 ];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@e {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0xe>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			enet-phy-lane-no-swap;
+			reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <500>;
+		};
+	};
+};
+
+&i2c1 {
+	expander0: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		sd-mux-oe-hog {
+			gpio-hog;
+			gpios = <8 0>;
+			output-low;
+			line-name = "SD_MUX_EN#";
+		};
+
+		boot-cfg-oe-hog {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "BOOT_CFG_OE#";
+		};
+
+		rst-usb-hub-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			output-high;
+			line-name = "RST_USB_HUB#";
+		};
+	};
+
+	expander1: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	tlv320aic3x04: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		reset-gpios = <&expander2 0 GPIO_ACTIVE_LOW>;
+		iov-supply = <&reg_vcc_3v3>;
+		ldoin-supply = <&reg_vcc_3v3>;
+	};
+
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1f>;
+	};
+
+	eeprom3: eeprom@57 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	#sound-dai-cells = <0>;
+	assigned-clock-rates = <49152000>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* console */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	no-sdio;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
new file mode 100644
index 000000000..ff1aba5fa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ BMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&bportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	bman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,bman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@10000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@20000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@30000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@40000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@50000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@60000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@70000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@80000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	bman-portal@90000 {
+		compatible = "fsl,bman-portal";
+		reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
new file mode 100644
index 000000000..dbd2fc3ba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x90000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb0000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f0000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
+	};
+
+	mdio@f1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
new file mode 100644
index 000000000..6fc5d2560
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 10g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x11: port@91000 {
+		cell-index = <0x11>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x91000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x31: port@b1000 {
+		cell-index = <0x31>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xb1000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@f2000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-memac";
+		reg = <0xf2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
+	};
+
+	mdio@f3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
new file mode 100644
index 000000000..4e02276fc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #0 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
new file mode 100644
index 000000000..0312fa43f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #1 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
new file mode 100644
index 000000000..af2df0797
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #2 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0a: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman0_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	ethernet@e4000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
+	};
+
+	mdio@e5000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
new file mode 100644
index 000000000..4ac98dc8b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0b: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman0_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	ethernet@e6000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
+	};
+
+	mdio@e7000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
new file mode 100644
index 000000000..bd932d8b0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #4 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0c: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman0_tx_0x2c: port@ac000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	ethernet@e8000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe8000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
+	};
+
+	mdio@e9000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
new file mode 100644
index 000000000..7de1c5203
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 1g port #5 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+fman@1a00000 {
+	fman0_rx_0x0d: port@8d000 {
+		cell-index = <0xd>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x8d000 0x1000>;
+	};
+
+	fman0_tx_0x2d: port@ad000 {
+		cell-index = <0x2d>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xad000 0x1000>;
+	};
+
+	ethernet@ea000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-memac";
+		reg = <0xea000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
+	};
+
+	mdio@eb000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
new file mode 100644
index 000000000..ae1c2abaa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ FMan v3 device tree
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ */
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
+fman0: fman@1a00000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <0>;
+	compatible = "fsl,fman";
+	ranges = <0x0 0x0 0x1a00000 0xfe000>;
+	reg = <0x0 0x1a00000 0x0 0xfe000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen QORIQ_CLK_FMAN 0>;
+	clock-names = "fmanclk";
+	fsl,qman-channel-range = <0x800 0x10>;
+	ptimer-handle = <&ptp_timer0>;
+	dma-coherent;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x60000>;
+	};
+
+	fman0_oh_0x2: port@82000 {
+		cell-index = <0x2>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	fman0_oh_0x3: port@83000 {
+		cell-index = <0x3>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	fman0_oh_0x4: port@84000 {
+		cell-index = <0x4>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	fman0_oh_0x5: port@85000 {
+		cell-index = <0x5>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	fman0_oh_0x6: port@86000 {
+		cell-index = <0x6>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman0_oh_0x7: port@87000 {
+		cell-index = <0x7>;
+		compatible = "fsl,fman-v3-port-oh";
+		reg = <0x87000 0x1000>;
+	};
+
+	mdio0: mdio@fc000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfc000 0x1000>;
+	};
+
+	xmdio0: mdio@fd000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xfd000 0x1000>;
+	};
+};
+
+ptp_timer0: ptp-timer@1afe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0x0 0x1afe000 0x0 0x1000>;
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clockgen QORIQ_CLK_FMAN 0>;
+	fsl,extts-fifo;
+};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
new file mode 100644
index 000000000..e3bec08b1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * QorIQ QMan Portals device tree
+ *
+ * Copyright 2011-2016 Freescale Semiconductor Inc.
+ *
+ */
+
+&qportals {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+
+	qportal0: qman-portal@0 {
+		/*
+		 * bootloader fix-ups are expected to provide the
+		 * "fsl,bman-portal-<hardware revision>" compatible
+		 */
+		compatible = "fsl,qman-portal";
+		reg = <0x0 0x4000>, <0x4000000 0x4000>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <0>;
+	};
+
+	qportal1: qman-portal@10000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x10000 0x4000>, <0x4010000 0x4000>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <1>;
+	};
+
+	qportal2: qman-portal@20000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x20000 0x4000>, <0x4020000 0x4000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <2>;
+	};
+
+	qportal3: qman-portal@30000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x30000 0x4000>, <0x4030000 0x4000>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <3>;
+	};
+
+	qportal4: qman-portal@40000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x40000 0x4000>, <0x4040000 0x4000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <4>;
+	};
+
+	qportal5: qman-portal@50000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x50000 0x4000>, <0x4050000 0x4000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <5>;
+	};
+
+	qportal6: qman-portal@60000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x60000 0x4000>, <0x4060000 0x4000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <6>;
+	};
+
+	qportal7: qman-portal@70000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x70000 0x4000>, <0x4070000 0x4000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <7>;
+	};
+
+	qportal8: qman-portal@80000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x80000 0x4000>, <0x4080000 0x4000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <8>;
+	};
+
+	qportal9: qman-portal@90000 {
+		compatible = "fsl,qman-portal";
+		reg = <0x90000 0x4000>, <0x4090000 0x4000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		cell-index = <9>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
new file mode 100644
index 000000000..5ac1cc9ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * NXP S32G2 SoC family
+ *
+ * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2017-2021 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nxp,s32g2";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	firmware {
+		psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+
+		uart0: serial@401c8000 {
+			compatible = "nxp,s32g2-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401c8000 0x3000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart1: serial@401cc000 {
+			compatible = "nxp,s32g2-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x401cc000 0x3000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		uart2: serial@402bc000 {
+			compatible = "nxp,s32g2-linflexuart",
+				     "fsl,s32v234-linflexuart";
+			reg = <0x402bc000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@50800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x50800000 0x10000>,
+			      <0x50880000 0x80000>,
+			      <0x50400000 0x2000>,
+			      <0x50410000 0x2000>,
+			      <0x50420000 0x2000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
new file mode 100644
index 000000000..9118d8d2e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "s32g2.dtsi"
+
+/ {
+	model = "NXP S32G2 Evaluation Board (S32G-VNP-EVB)";
+	compatible = "nxp,s32g274a-evb", "nxp,s32g2";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+/* UART (J58) to Micro USB port */
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
new file mode 100644
index 000000000..e05ee854c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 SUSE LLC
+ * Copyright (c) 2019-2021 NXP
+ */
+
+/dts-v1/;
+
+#include "s32g2.dtsi"
+
+/ {
+	model = "NXP S32G2 Reference Design Board 2 (S32G-VNP-RDB2)";
+	compatible = "nxp,s32g274a-rdb2", "nxp,s32g2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 4GiB RAM */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>,
+		      <0x8 0x80000000 0 0x80000000>;
+	};
+};
+
+/* UART (J2) to Micro USB port */
+&uart0 {
+	status = "okay";
+};
+
+/* UART (J1) to Micro USB port */
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts
new file mode 100644
index 000000000..4b802518c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ */
+
+/dts-v1/;
+#include "s32v234.dtsi"
+
+/ {
+	model = "NXP S32V234-EVB2 Board";
+	compatible = "fsl,s32v234-evb", "fsl,s32v234";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi
new file mode 100644
index 000000000..42409ec56
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2018 NXP
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	compatible = "fsl,s32v234";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster0_l2_cache>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster0_l2_cache>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster1_l2_cache>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x80000000>;
+			next-level-cache = <&cluster1_l2_cache>;
+		};
+
+		cluster0_l2_cache: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2_cache: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		/* clock-frequency might be modified by u-boot, depending on the
+		 * chip version.
+		 */
+		clock-frequency = <10000000>;
+	};
+
+	gic: interrupt-controller@7d001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x7d001000 0 0x1000>,
+		      <0 0x7d002000 0 0x2000>,
+		      <0 0x7d004000 0 0x2000>,
+		      <0 0x7d006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		aips0: bus@40000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			reg = <0x0 0x40000000 0x0 0x7d000>;
+			ranges;
+
+			uart0: serial@40053000 {
+				compatible = "fsl,s32v234-linflexuart";
+				reg = <0x0 0x40053000 0x0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		aips1: bus@40080000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&gic>;
+			reg = <0x0 0x40080000 0x0 0x70000>;
+			ranges;
+
+			uart1: serial@400bc000 {
+				compatible = "fsl,s32v234-linflexuart";
+				reg = <0x0 0x400bc000 0x0 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000..f4d68caeb
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
+dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
new file mode 100644
index 000000000..79a55a0fa
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * dtsi for Hisilicon Hi3660 Coresight
+ *
+ * Copyright (C) 2016-2018 HiSilicon Ltd.
+ *
+ * Author: Wanglai Shi <shiwanglai@hisilicon.com>
+ *
+ */
+/ {
+	soc {
+		/* A53 cluster internals */
+		etm@ecc40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xecc40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@ecd40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xecd40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@ece40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xece40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@ecf40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xecf40000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		funnel@ec801000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xec801000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster0_funnel_out: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster0_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster0_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster0_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@ec802000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xec802000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					cluster0_etf_in: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					cluster0_etf_out: endpoint {
+						remote-endpoint =
+							<&combo_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		/* A73 cluster internals */
+		etm@ed440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed440000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@ed540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed540000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@ed640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed640000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@ed740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xed740000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		funnel@ed001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xed001000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster1_funnel_out: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_funnel_in0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster1_funnel_in1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster1_funnel_in2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster1_funnel_in3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etf@ed002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xed002000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					cluster1_etf_in: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					cluster1_etf_out: endpoint {
+						remote-endpoint =
+							<&combo_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		/* An invisible combo funnel between clusters and top funnel */
+		funnel {
+			compatible = "arm,coresight-static-funnel";
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					combo_funnel_out: endpoint {
+						remote-endpoint =
+							<&top_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					combo_funnel_in0: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					combo_funnel_in1: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_out>;
+					};
+				};
+			};
+		};
+
+		/* Top internals */
+		funnel@ec031000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xec031000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					top_funnel_out: endpoint {
+						remote-endpoint =
+							<&top_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					top_funnel_in: endpoint {
+						remote-endpoint =
+							<&combo_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@ec036000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xec036000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					top_etf_in: endpoint {
+						remote-endpoint =
+							<&top_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					top_etf_out: endpoint {
+						remote-endpoint =
+							<&replicator_in>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+							<&top_etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator0_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator0_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etr@ec033000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xec033000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+							<&replicator0_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@ec032000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0 0xec032000 0 0x1000>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+							<&replicator0_out1>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
new file mode 100644
index 000000000..3f13a960f
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -0,0 +1,697 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey960 Development Board
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3660.dtsi"
+#include "hikey960-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	model = "HiKey960";
+	compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+
+	aliases {
+		mshc1 = &dwmmc1;
+		mshc2 = &dwmmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* rewrite this at bootloader */
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@32000000 {
+			compatible = "ramoops";
+			reg = <0x0 0x32000000 0x0 0x00100000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
+		};
+	};
+
+	reboot-mode-syscon@32100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x32100000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal = <0x77665501>;
+			mode-bootloader = <0x77665500>;
+			mode-recovery = <0x77665502>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user-1 {
+			label = "green:user1";
+			/* gpio_150_user_led1 */
+			gpios = <&gpio18 6 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user-2 {
+			label = "green:user2";
+			/* gpio_151_user_led2 */
+			gpios = <&gpio18 7 0>;
+			linux,default-trigger = "none";
+		};
+
+		led-user-3 {
+			label = "green:user3";
+			/* gpio_189_user_led3 */
+			gpios = <&gpio23 5 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user-4 {
+			label = "green:user4";
+			/* gpio_190_user_led4 */
+			gpios = <&gpio23 6 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			/* gpio_205_wifi_active */
+			gpios = <&gpio25 5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-bt {
+			label = "blue:bt";
+			gpios = <&gpio25 7 0>;
+			/* gpio_207_user_led1 */
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	pmic: pmic@fff34000 {
+		compatible = "hisilicon,hi6421v530-pmic";
+		reg = <0x0 0xfff34000 0x0 0x1000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			ldo3: LDO3 { /* HDMI */
+				regulator-name = "VOUT3_1V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo9: LDO9 { /* SDCARD I/O */
+				regulator-name = "VOUT9_1V8_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			ldo11: LDO11 { /* Low Speed Connector */
+				regulator-name = "VOUT11_1V8_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			ldo15: LDO15 { /* UFS VCC */
+				regulator-name = "VOUT15_3V0";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo16: LDO16 { /* SD VDD */
+				regulator-name = "VOUT16_2V95";
+				regulator-min-microvolt = <1750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+		};
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* GPIO_051_WIFI_EN */
+		gpio = <&gpio6 3 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from "HiKey 960 Board ver A" schematics
+ * from Huawei. The 40 pin low speed expansion connector is named
+ * J2002 63453-140LF.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	/* GPIO_000-GPIO_007 */
+	gpio-line-names =
+		"",
+		"TP901", /* TEST_MODE connected to TP901 */
+		"[PMU0_SSI]",
+		"[PMU1_SSI]",
+		"[PMU2_SSI]",
+		"[PMU0_CLKOUT]",
+		"[JTAG_TCK]",
+		"[JTAG_TMS]";
+};
+
+&gpio1 {
+	/* GPIO_008-GPIO_015 */
+	gpio-line-names =
+		"[JTAG_TRST_N]",
+		"[JTAG_TDI]",
+		"[JTAG_TDO]",
+		"NC", "NC",
+		"[I2C3_SCL]",
+		"[I2C3_SDA]",
+		"NC";
+};
+
+&gpio2 {
+	/* GPIO_016-GPIO_023 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-J", /* LSEC pin 32: GPIO_019 */
+		"GPIO_020_HDMI_SEL",
+		"GPIO-L", /* LSEC pin 34: GPIO_021 */
+		"GPIO_022_UFSBUCK_INT_N",
+		"GPIO-G"; /* LSEC pin 29: LCD_TE0 */
+};
+
+&gpio3 {
+	/* GPIO_024-GPIO_031 */
+	/* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
+	gpio-line-names =
+		"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+		"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+		"NC",
+		"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+		"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+		"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+		"[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
+		"NC";
+};
+
+&gpio4 {
+	/* GPIO_032-GPIO_039 */
+	gpio-line-names =
+		"NC", "NC",
+		"PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
+		"GPIO_035_PMU2_EN",
+		"GPIO_036_USB_HUB_RESET",
+		"NC", "NC", "NC";
+};
+
+&gpio5 {
+	/* GPIO_040-GPIO_047 */
+	gpio-line-names =
+		"GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
+		"GPIO_041_HDMI_PD",
+		"TP904", /* Test point */
+		"TP905", /* Test point */
+		"NC", "NC",
+		"GPIO_046_HUB_VDD33_EN",
+		"GPIO_047_PMU1_EN";
+};
+
+&gpio6 {
+	/* GPIO_048-GPIO_055 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO_051_WIFI_EN",
+		"GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
+		/*
+		 * These two pins should be used for SD(IO) data according to the
+		 * 96boards specification but seems to be repurposed for a IRDA UART.
+		 * They are however named according to the spec.
+		 */
+		"[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
+		"[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
+		"[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
+};
+
+&gpio7 {
+	/* GPIO_056-GPIO_063 */
+	gpio-line-names =
+		"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+		"[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
+		"[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
+		"[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
+		"[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
+		"[SOC_BT_UART4_CTS_N]",
+		"[SOC_BT_UART4_RTS_N]",
+		"[SOC_BT_UART4_RXD]";
+};
+
+&gpio8 {
+	/* GPIO_064-GPIO_071 */
+	gpio-line-names =
+		"[SOC_BT_UART4_TXD]",
+		"NC",
+		"[PMU_HKADC_SSI]",
+		"NC",
+		"GPIO_068_SEL",
+		"NC", "NC", "NC";
+
+};
+
+&gpio9 {
+	/* GPIO_072-GPIO_079 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
+		"NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+	/* GPIO_080-GPIO_087 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+	/* GPIO_088-GPIO_095 */
+	gpio-line-names =
+		"NC",
+		"[PCIE_PERST_N]",
+		"NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+	/* GPIO_096-GPIO_103 */
+	gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
+};
+
+&gpio13 {
+	/* GPIO_104-GPIO_111 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio14 {
+	/* GPIO_112-GPIO_119 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio15 {
+	/* GPIO_120-GPIO_127 */
+	gpio-line-names =
+		"NC", "NC", "NC", "NC", "NC", "NC",
+		"GPIO_126_BT_EN",
+		"TP902"; /* GPIO_127_JTAG_SEL0 */
+};
+
+&gpio16 {
+	/* GPIO_128-GPIO_135 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio17 {
+	/* GPIO_136-GPIO_143 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio18 {
+	/* GPIO_144-GPIO_151 */
+	gpio-line-names =
+		"[UFS_REF_CLK]",
+		"[UFS_RST_N]",
+		"[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
+		"[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
+		"[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
+		"[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
+		"GPIO_150_USER_LED1",
+		"GPIO_151_USER_LED2";
+};
+
+&gpio19 {
+	/* GPIO_152-GPIO_159 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
+};
+
+&gpio20 {
+	/* GPIO_160-GPIO_167 */
+	gpio-line-names =
+		"[SD_CLK]",
+		"[SD_CMD]",
+		"[SD_DATA0]",
+		"[SD_DATA1]",
+		"[SD_DATA2]",
+		"[SD_DATA3]",
+		"", "";
+};
+
+&gpio21 {
+	/* GPIO_168-GPIO_175 */
+	gpio-line-names =
+		"[WL_SDIO_CLK]",
+		"[WL_SDIO_CMD]",
+		"[WL_SDIO_DATA0]",
+		"[WL_SDIO_DATA1]",
+		"[WL_SDIO_DATA2]",
+		"[WL_SDIO_DATA3]",
+		"", "";
+};
+
+&gpio22 {
+	/* GPIO_176-GPIO_183 */
+	gpio-line-names =
+		"[GPIO_176_PMU_PWR_HOLD]",
+		"NA",
+		"[SYSCLK_EN]",
+		"GPIO_179_WL_WAKEUP_AP",
+		"GPIO_180_HDMI_INT",
+		"NA",
+		"GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
+		"[I2C0_SCL]"; /* LSEC pin 15 */
+};
+
+&gpio23 {
+	/* GPIO_184-GPIO_191 */
+	gpio-line-names =
+		"[I2C0_SDA]", /* LSEC pin 17 */
+		"[I2C1_SCL]", /* Actual SoC I2C1 */
+		"[I2C1_SDA]", /* Actual SoC I2C1 */
+		"[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
+		"[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
+		"GPIO_189_USER_LED3",
+		"GPIO_190_USER_LED4",
+		"";
+};
+
+&gpio24 {
+	/* GPIO_192-GPIO_199 */
+	gpio-line-names =
+		"[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
+		"[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
+		"[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
+		"[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
+		"[GPIO_196_I2S2_DI]",
+		"[GPIO_197_I2S2_DO]",
+		"[GPIO_198_I2S2_XCLK]",
+		"[GPIO_199_I2S2_XFS]";
+};
+
+&gpio25 {
+	/* GPIO_200-GPIO_207 */
+	gpio-line-names =
+		"NC",
+		"NC",
+		"GPIO_202_VBUS_TYPEC",
+		"GPIO_203_SD_DET",
+		"GPIO_204_PMU12_IRQ_N",
+		"GPIO_205_WIFI_ACTIVE",
+		"GPIO_206_USBSW_SEL",
+		"GPIO_207_BT_ACTIVE";
+};
+
+&gpio26 {
+	/* GPIO_208-GPIO_215 */
+	gpio-line-names =
+		"GPIO-A", /* LSEC pin 23: GPIO_208 */
+		"GPIO-B", /* LSEC pin 24: GPIO_209 */
+		"GPIO-C", /* LSEC pin 25: GPIO_210 */
+		"GPIO-D", /* LSEC pin 26: GPIO_211 */
+		"GPIO-E", /* LSEC pin 27: GPIO_212 */
+		"[PCIE_CLKREQ_N]",
+		"[PCIE_WAKE_N]",
+		"[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
+};
+
+&gpio27 {
+	/* GPIO_216-GPIO_223 */
+	gpio-line-names =
+		"[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
+		"[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
+		"[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
+		"GPIO_219_CC_INT",
+		"NC",
+		"NC",
+		"[PMU_INT]",
+		"";
+};
+
+&gpio28 {
+	/* GPIO_224-GPIO_231 */
+	gpio-line-names =
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c0 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "okay";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@1 {
+					reg = <1>;
+					usb_con_ss: endpoint {
+						remote-endpoint = <&dwc3_ss>;
+					};
+				};
+			};
+		};
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
+	adv7533: adv7533@39 {
+		status = "okay";
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&uart3 {
+	/* On Low speed expansion */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
+		max-speed = <3000000>;
+	};
+};
+
+&uart6 {
+	/* On Low speed expansion */
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&spi3 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&dwmmc1 {
+	bus-width = <0x4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
+	status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
+	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
+	/* WL_EN */
+	vmmc-supply = <&wlan_en>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;      /* sdio func num */
+		/* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
+		interrupt-parent = <&gpio22>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&dwc3 { /* USB */
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phy_type = "utmi";
+	snps,dis-del-phy-power-chg-quirk;
+	snps,lfps_filter_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,tx_de_emphasis_quirk;
+	snps,tx_de_emphasis = <1>;
+	snps,dis_enblslpm_quirk;
+	snps,gctl-reset-quirk;
+	usb-role-switch;
+	role-switch-default-mode = "host";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&rt1711h_ep>;
+		};
+
+		dwc3_ss: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
new file mode 100644
index 000000000..7e137a884
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -0,0 +1,1199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3660 SoC
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3660-clock.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "hisilicon,hi3660";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <110>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+			capacity-dmips-mhz = <592>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <550>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&A73_L2>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <650>;
+				min-residency-us = <1500>;
+			};
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1600>;
+				min-residency-us = <3500>;
+			};
+
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <550>;
+				min-residency-us = <1500>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2900>;
+				min-residency-us = <3500>;
+			};
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		A73_L2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <533000000>;
+			opp-microvolt = <700000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp01 {
+			opp-hz = /bits/ 64 <999000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp02 {
+			opp-hz = /bits/ 64 <1402000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp03 {
+			opp-hz = /bits/ 64 <1709000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp04 {
+			opp-hz = /bits/ 64 <1844000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp10 {
+			opp-hz = /bits/ 64 <903000000>;
+			opp-microvolt = <700000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp11 {
+			opp-hz = /bits/ 64 <1421000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp12 {
+			opp-hz = /bits/ 64 <1805000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp13 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp14 {
+			opp-hz = /bits/ 64 <2362000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	gic: interrupt-controller@e82b0000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
+		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
+		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crg_ctrl: crg_ctrl@fff35000 {
+			compatible = "hisilicon,hi3660-crgctrl", "syscon";
+			reg = <0x0 0xfff35000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		crg_rst: crg_rst_controller {
+			compatible = "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&crg_ctrl>;
+		};
+
+
+		pctrl: pctrl@e8a09000 {
+			compatible = "hisilicon,hi3660-pctrl", "syscon";
+			reg = <0x0 0xe8a09000 0x0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		pmuctrl: crg_ctrl@fff34000 {
+			compatible = "hisilicon,hi3660-pmuctrl", "syscon";
+			reg = <0x0 0xfff34000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sctrl: sctrl@fff0a000 {
+			compatible = "hisilicon,hi3660-sctrl", "syscon";
+			reg = <0x0 0xfff0a000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu: iomcu@ffd7e000 {
+			compatible = "hisilicon,hi3660-iomcu", "syscon";
+			reg = <0x0 0xffd7e000 0x0 0x1000>;
+			#clock-cells = <1>;
+
+		};
+
+		iomcu_rst: reset {
+			compatible = "hisilicon,hi3660-reset";
+			hisi,rst-syscon = <&iomcu>;
+			#reset-cells = <2>;
+		};
+
+		mailbox: mailbox@e896b000 {
+			compatible = "hisilicon,hi3660-mbox";
+			reg = <0x0 0xe896b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <3>;
+		};
+
+		stub_clock: stub_clock@e896b500 {
+			compatible = "hisilicon,hi3660-stub-clk";
+			reg = <0x0 0xe896b500 0x0 0x0100>;
+			#clock-cells = <1>;
+			mboxes = <&mailbox 13 3 0>;
+		};
+
+		dual_timer0: timer@fff14000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfff14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		i2c0: i2c@ffd71000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd71000 0x0 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C0>;
+			resets = <&iomcu_rst 0x20 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffd72000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd72000 0x0 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C1>;
+			resets = <&iomcu_rst 0x20 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fdf0c000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C3>;
+			resets = <&crg_rst 0x78 7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@fdf0b000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_I2C7>;
+			resets = <&crg_rst 0x60 14>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_pmx_func &i2c7_cfg_func>;
+			status = "disabled";
+		};
+
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 2 &dma0 3>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART1>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 4 &dma0 5>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 6 &dma0 7>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART4>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		uart5: serial@fdf05000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf05000 0x0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			dma-names = "rx", "tx";
+			dmas = <&dma0 8 &dma0 9>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART5>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart5_pmx_func &uart5_cfg_func>;
+			status = "disabled";
+		};
+
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_UART6>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+			status = "disabled";
+		};
+
+		dma0: dma@fdf30000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0x0 0xfdf30000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			dma-channel-mask = <0xfffe>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_DMAC>;
+			dma-no-cci;
+			dma-type = "hi3660_dma";
+		};
+
+		asp_dmac: dma-controller@e804b000 {
+			compatible = "hisilicon,hisi-pcm-asp-dma-1.0";
+			reg = <0x0 0xe804b000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <32>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "asp_dma_irq";
+		};
+
+		rtc0: rtc@fff04000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0Xfff04000 0x0 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio0: gpio@e8a0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0b000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 0 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e8a0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0c000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 7 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e8a0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0d000 0 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 14 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e8a0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0e000 0 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 22 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e8a0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a0f000 0 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@e8a10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a10000 0 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@e8a11000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a11000 0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@e8a12000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a12000 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@e8a13000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a13000 0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 62 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@e8a14000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a14000 0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 70 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@e8a15000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a15000 0 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 78 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@e8a16000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a16000 0 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 86 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@e8a17000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a17000 0 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 94 3 &pmx0 7 101 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@e8a18000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a18000 0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 102 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@e8a19000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a19000 0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 110 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@e8a1a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1a000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 118 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@e8a1b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1b000 0 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@e8a1c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1c000 0 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@ff3b4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xff3b4000 0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx2 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@ff3b5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xff3b5000 0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx2 0 8 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@e8a1f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a1f000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 0 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@e8a20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xe8a20000 0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx3 0 0 6>;
+			clocks = <&crg_ctrl HI3660_PCLK_GPIO21>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio22: gpio@fff0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0b000 0 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO176 */
+			gpio-ranges = <&pmx4 2 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio23: gpio@fff0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0c000 0 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO184 */
+			gpio-ranges = <&pmx4 0 6 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio24: gpio@fff0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0d000 0 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO192 */
+			gpio-ranges = <&pmx4 0 13 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio25: gpio@fff0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0e000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO200 */
+			gpio-ranges = <&pmx4 0 21 4 &pmx4 5 25 3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio26: gpio@fff0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff0f000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO208 */
+			gpio-ranges = <&pmx4 0 28 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio27: gpio@fff10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff10000 0 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO216 */
+			gpio-ranges = <&pmx4 0 36 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio28: gpio@fff1d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0 0xfff1d000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3660_PCLK_AO_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		spi2: spi@ffd68000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xffd68000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI2>, <&crg_ctrl HI3660_CLK_GATE_SPI2>;
+			clock-names = "sspclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pmx_func &spi2_cfg_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio27 2 0>;
+			status = "disabled";
+		};
+
+		spi3: spi@ff3b3000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xff3b3000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SPI3>, <&crg_ctrl HI3660_CLK_GATE_SPI3>;
+			clock-names = "sspclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_pmx_func &spi3_cfg_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio18 5 0>;
+			status = "disabled";
+		};
+
+		pcie@f4000000 {
+			compatible = "hisilicon,kirin960-pcie";
+			reg = <0x0 0xf4000000 0x0 0x1000>,
+			      <0x0 0xff3fe000 0x0 0x1000>,
+			      <0x0 0xf3f20000 0x0 0x40000>,
+			      <0x0 0xf5000000 0x0 0x2000>;
+			reg-names = "dbi", "apb", "phy", "config";
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x00000000
+				  0x0 0xf6000000
+				  0x0 0x02000000>;
+			num-lanes = <1>;
+			#interrupt-cells = <1>;
+			interrupts = <0 283 4>;
+			interrupt-names = "msi";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1
+					 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 2
+					 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 3
+					 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0 0 0 4
+					 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+				 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+				 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+				 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+				 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+			clock-names = "pcie_phy_ref", "pcie_aux",
+				      "pcie_apb_phy", "pcie_apb_sys",
+				      "pcie_aclk";
+			reset-gpios = <&gpio11 1 0 >;
+		};
+
+		/* UFS */
+		ufs: ufs@ff3b0000 {
+			compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3b0000 0x0 0x1000>,
+				<0x0 0xff3b1000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
+				<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>,
+					<0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
+		/* SD */
+		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
+				<&crg_ctrl HI3660_HCLK_GATE_SD>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
+			hisilicon,peripheral-syscon = <&sctrl>;
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* SDIO */
+		dwmmc2: dwmmc2@ff3ff000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff3ff000 0x0 0x1000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
+				 <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
+			clock-names = "ciu", "biu";
+			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@e8a06000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xe8a06000 0x0 0x1000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		watchdog1: watchdog@e8a07000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xe8a07000 0x0 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_OSC32K>,
+				 <&crg_ctrl HI3660_OSC32K>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		tsensor: tsensor@fff30000 {
+			compatible = "hisilicon,hi3660-tsensor";
+			reg = <0x0 0xfff30000 0x0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+
+			cls0: cls0-thermal {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <4500>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 1>;
+
+				trips {
+					threshold: trip-point0 {
+						temperature = <65000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+
+					target: trip-point1 {
+						temperature = <75000>;
+						hysteresis = <1000>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						contribution = <1024>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+					map1 {
+						trip = <&target>;
+						contribution = <512>;
+						cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		dwc3: usb@ff100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff100000 0x0 0x100000>;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "ref", "bus_early";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			interrupts = <0 159 4>, <0 161 4>;
+			phys = <&usb_phy>;
+			phy-names = "usb3-phy";
+		};
+	};
+};
+
+#include "hi3660-coresight.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
new file mode 100644
index 000000000..7c32f5fd5
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey970 Development Board
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+
+#include "hi3670.dtsi"
+#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
+
+/ {
+	model = "HiKey970";
+	compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
+	aliases {
+		mshc1 = &dwmmc1;
+		mshc2 = &dwmmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;       /* console UART */
+	};
+
+	chosen {
+		stdout-path = "serial6:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* expect bootloader to fill in this region */
+		reg = <0x0 0x0 0x0 0x0>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* GPIO_051_WIFI_EN */
+		gpio = <&gpio6 3 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from "hikey970-schematics.pdf" from HiSilicon.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	/* GPIO_000-GPIO_007 */
+	gpio-line-names =
+		"",
+		"TP901", /* TEST_MODE connected to TP901 */
+		"",
+		"GPIO_003_USB_HUB_RESET_N",
+		"NC",
+		"[AP_GPS_REF_CLK]",
+		"[I2C3_SCL]",
+		"[I2C3_SDA]";
+};
+
+&gpio1 {
+	/* GPIO_008-GPIO_015 */
+	gpio-line-names =
+		"[UART0_CTS]", /* LSEC pin 3: GPIO_008_UART2_CTS_N */
+		"[UART0_RTS]", /* LSEC pin 9: GPIO_009_UART2_RTS_N */
+		"[UART0_TXD]", /* LSEC pin 5: GPIO_010_UART2_TXD */
+		"[UART0_RXD]", /* LSEC pin 7: GPIO_011_UART2_RXD */
+		"[USER_LED5]",
+		"GPIO-I", /* LSEC pin 31: GPIO_013_CAM0_RST_N */
+		"[USER_LED3]",
+		"[USER_LED4]";
+};
+
+&gpio2 {
+	/* GPIO_016-GPIO_023 */
+	gpio-line-names =
+		"GPIO-G", /* LSEC pin 29: GPIO_016_LCD_TE0 */
+		"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+		"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+		"GPIO_019_BT_ACTIVE",
+		"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+		"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+		"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+		"[I2C3_SDA]"; /* HSEC pin 38: ISP_SDA1 */
+};
+
+&gpio3 {
+	/* GPIO_024-GPIO_031 */
+	gpio-line-names =
+		"GPIO_024_WIFI_ACTIVE",
+		"GPIO_025_PERST_M.2",
+		"[I2C4_SCL]",
+		"[I2C4_SDA]",
+		"NC",
+		"GPIO-H", /* LSEC pin 30: GPIO_029_LCD_RST_N */
+		"[USER_LED1]",
+		"GPIO-L"; /* LSEC pin 34: GPIO_031 */
+};
+
+&gpio4 {
+	/* GPIO_032-GPIO_039 */
+	gpio-line-names =
+		"GPIO-K", /* LSEC pin 33: GPIO_032_CAM1_RST_N */
+		"GPIO_033_PMU1_EN",
+		"GPIO_034_USBSW_SEL",
+		/*
+		 * These two pins should be used for SD(IO) data according
+		 * to the 96boards specification but seems to be repurposed
+		 * for UART 0. They are however named according to the spec.
+		 */
+		"[SD_DAT1]", /* HSEC pin 3: GPIO_035_UART0_RXD */
+		"[SD_DAT2]", /* HSEC pin 5: GPIO_036_UART0_TXD */
+		"[UART1_RXD]", /* LSEC pin 13: DEBUG_UART6_RXD */
+		"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+		"[SOC_GPS_UART3_CTS_N]"; /* TP2304 */
+};
+
+&gpio5 {
+	/* GPIO_040-GPIO_047 */
+	gpio-line-names =
+		"[SOC_GPS_UART3_RTS_N]", /* TP2302 */
+		"[SOC_GPS_UART3_RXD]", /* TP2303 */
+		"[SOC_GPS_UART3_TXD]", /* TP2305 */
+		"[SOC_BT_UART4_CTS_N]",
+		"[SOC_BT_UART4_RTS_N]",
+		"[SOC_BT_UART4_RXD]",
+		"[SOC_BT_UART4_TXD]",
+		"NC";
+};
+
+&gpio6 {
+	/* GPIO_048-GPIO_055 */
+	gpio-line-names =
+		"NC",
+		"GPIO_049_USER_LED6",
+		"GPIO_050_CAN_RST",
+		"GPIO_051_WIFI_EN",
+		"GPIO-D", /* LSEC pin 26 */
+		"GPIO-J", /* LSEC pin 32 */
+		"GPIO_054_BT_EN",
+		"[GPIO_055_SEL]";
+};
+
+&gpio7 {
+	/* GPIO_056-GPIO_063 */
+	gpio-line-names =
+		"[PCIE_PERST_L]", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio8 {
+	/* GPIO_064-GPIO_071 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio9 {
+	/* GPIO_072-GPIO_079 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+	/* GPIO_080-GPIO_087 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+	/* GPIO_088-GPIO_095 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+	/* GPIO_096-GPIO_103 */
+	gpio-line-names = "NC", "", "", "", "", "", "", "";
+};
+
+&gpio13 {
+	/* GPIO_104-GPIO_111 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio14 {
+	/* GPIO_112-GPIO_119 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio15 {
+	/* GPIO_120-GPIO_127 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio16 {
+	/* GPIO_128-GPIO_135 */
+	gpio-line-names =
+		"[WL_SDIO_CLK]",
+		"[WL_SDIO_CMD]",
+		"[WL_SDIO_DATA0]",
+		"[WL_SDIO_DATA1]",
+		"[WL_SDIO_DATA2]",
+		"[WL_SDIO_DATA3]",
+		"[ETH_ISOLATE]",
+		"NC";
+};
+
+&gpio17 {
+	/* GPIO_136-GPIO_143 */
+	gpio-line-names =
+		"[MINI1CLK_EN]", "NC", "", "", "", "", "", "";
+};
+
+&gpio18 {
+	/* GPIO_144-GPIO_151 */
+	gpio-line-names =
+		"[SPI1_SCLK]", /* HSEC pin 9: GPIO_144_SPI3_CLK */
+		"[SPI1_DIN]", /* HSEC pin 11: GPIO_145_SPI3_DI */
+		"[SPI1_DOUT]", /* HSEC pin 1: GPIO_146_SPI3_DO */
+		"[SPI1_CS]", /* HSEC pin 7: GPIO_147_SPI3_CS0_N */
+		"[POWER_INT_N]",
+		"[CDMA_GPS_SYNC]",
+		"GPIO_150_PEX_INTA",
+		"GPIO_151_CAN_INT";
+};
+
+&gpio19 {
+	/* GPIO_152-GPIO_159 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio20 {
+	/* GPIO_160-GPIO_167 */
+	gpio-line-names =
+		"[SD_CLK]",
+		"[SD_CMD]",
+		"[SD_DATA0]",
+		"[SD_DATA1]",
+		"[SD_DATA2]",
+		"[SD_DATA3]",
+		"GPIO_166_ETHCLK_EN",
+		"GPIO_167_USER_LED2";
+};
+
+&gpio21 {
+	/* GPIO_168-GPIO_175 */
+	gpio-line-names =
+		"GPIO_168_GPS_EN",
+		"GPIO-C", /* LSEC pin 25: GPIO_169_USIM1_CLK */
+		"GPIO-E", /* LSEC pin 27: GPIO_170_USIM1_RST */
+		"GPIO-B", /* LSEC pin 24: GPIO_171_USIM1_DATA */
+		"", "", "", "", "";
+};
+
+&gpio22 {
+	/* GPIO_176-GPIO_183 */
+	gpio-line-names =
+		"[PMU_PWR_HOLD]",
+		"GPIO_177_WL_WAKEUP_AP",
+		"[JTAG_TCK]",
+		"[JTAG_TMS]",
+		"[JTAG_TDI]",
+		"[JTAG_TMS]",
+		"GPIO_182_FATAL_ERR",
+		"NC";
+};
+
+&gpio23 {
+	/* GPIO_184-GPIO_191 */
+	gpio-line-names =
+		"GPIO_184_JTAG_SEL",
+		"GPIO-F", /* LSEC pin 28: GPIO_185_LCD_BL_PWM */
+		"[I2C0_SCL]", /* LSEC pin 15: GPIO_186_I2C0_SCL */
+		"[I2C0_SDA]", /* LSEC pin 17: GPIO_187_I2C0_SDA */
+		"[GPIO_188_I2C1_SCL]", /* Actual SoC I2C1_SCL */
+		"[GPIO_189_I2C1_SDA]", /* Actual SoC I2C1_SDA */
+		"[I2C1_SCL]", /* LSEC pin 19: GPIO_190_I2C2_SCL */
+		"[I2C2_SDA]"; /* LSEC pin 21: GPIO_191_I2C2_SDA */
+};
+
+&gpio24 {
+	/* GPIO_192-GPIO_199 */
+	gpio-line-names =
+		"[SD_LED]",
+		"NC",
+		"[PCM_DI]", /* LSEC pin 22: GPIO_194_I2S0_DI */
+		"[PCM_DO]", /* LSEC pin 20: GPIO_195_I2S0_DO */
+		"[PCM_CLK]", /* LSEC pin 18: GPIO_196_I2S0_XCLK */
+		"[PCM_FS]", /* LSEC pin 16: GPIO_197_I2S0_XFS */
+		"",
+		"[I2S2_DO]";
+};
+
+&gpio25 {
+	/* GPIO_200-GPIO_207 */
+	gpio-line-names =
+		"[I2S2_XCLK]",
+		"[I2S2_XFS]",
+		"GPIO_202_PERST_ETH",
+		"GPIO_203_PWRON_DET",
+		"GPIO_204_PMU1_IRQ_N",
+		"GPIO_205_SD_DET",
+		"GPIO_206_GPS_MOTION_INT",
+		"GPIO_207_HDMI_SEL";
+};
+
+&gpio26 {
+	/* GPIO_208-GPIO_215 */
+	gpio-line-names =
+		"GPIO-A", /* LSEC pin 23: GPIO_208_WAKEUP_SOC */
+		"GPIO_209_VBUS_TYPEC",
+		"NC",
+		"NC",
+		"NC",
+		"[SPI0_SCLK]", /* LSEC pin 8: GPIO_213_SPI2_CLK */
+		"[SPI0_DIN]", /* LSEC pin 10: GPIO_214_SPI2_DI */
+		"[SPI0_DOUT]"; /* LSEC pin 14: GPIO_215_SPI2_DO */
+};
+
+&gpio27 {
+	/* GPIO_216-GPIO_223 */
+	gpio-line-names =
+		"[SPI0_CS]", /* LSEC pin 12: GPIO_216_SPI2_CS0_N */
+		"GPIO_217_HDMI_PD",
+		"GPIO_218_GPS_WAKEUP_AP",
+		"GPIO_219_M.2CLK_EN",
+		"GPIO_220_PERST_MINI",
+		"GPIO_221_CC_INT",
+		"[PCIE_CLKREQ_L]",
+		"NC";
+};
+
+&gpio28 {
+	/* GPIO_224-GPIO_231 */
+	gpio-line-names =
+		"[PMU0_INT]",
+		"[SPMI_DATA]",
+		"[SPMI_CLK]",
+		"[CAN_SPI_CLK]",
+		"[CAN_SPI_DI]",
+		"[CAN_SPI_DO]",
+		"[CAN_SPI_CS]",
+		"GPIO_231_HDMI_INT";
+};
+
+&dwmmc1 {
+	bus-width = <0x4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sd-highspeed;
+	disable-wp;
+	cd-inverted;
+	cd-gpios = <&gpio25 5 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
+	status = "okay";
+};
+
+&dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
+	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
+	/* WL_EN */
+	vmmc-supply = <&wlan_en>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;      /* sdio func num */
+		/* WL_IRQ, GPIO_177_WL_WAKEUP_AP */
+		interrupt-parent = <&gpio22>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart0 {
+	/* On High speed expansion header */
+	label = "HS-UART0";
+	status = "okay";
+};
+
+&uart2 {
+	/* On Low speed expansion header */
+	label = "LS-UART0";
+	status = "okay";
+};
+
+&uart6 {
+	/* On Low speed expansion header */
+	label = "LS-UART1";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
new file mode 100644
index 000000000..886b93c58
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3670 SoC
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3670-clock.h>
+
+/ {
+	compatible = "hisilicon,hi3670";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@e82b0000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
+		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
+		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <1920000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crg_ctrl: crg_ctrl@fff35000 {
+			compatible = "hisilicon,hi3670-crgctrl", "syscon";
+			reg = <0x0 0xfff35000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		crg_rst: crg_rst_controller {
+			compatible = "hisilicon,hi3670-reset",
+				     "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&crg_ctrl>;
+		};
+
+		pctrl: pctrl@e8a09000 {
+			compatible = "hisilicon,hi3670-pctrl", "syscon";
+			reg = <0x0 0xe8a09000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pmuctrl: crg_ctrl@fff34000 {
+			compatible = "hisilicon,hi3670-pmuctrl", "syscon";
+			reg = <0x0 0xfff34000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sctrl: sctrl@fff0a000 {
+			compatible = "hisilicon,hi3670-sctrl", "syscon";
+			reg = <0x0 0xfff0a000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu: iomcu@ffd7e000 {
+			compatible = "hisilicon,hi3670-iomcu", "syscon";
+			reg = <0x0 0xffd7e000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		media1_crg: media1_crgctrl@e87ff000 {
+			compatible = "hisilicon,hi3670-media1-crg", "syscon";
+			reg = <0x0 0xe87ff000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		media2_crg: media2_crgctrl@e8900000 {
+			compatible = "hisilicon,hi3670-media2-crg","syscon";
+			reg = <0x0 0xe8900000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu_rst: reset {
+			compatible = "hisilicon,hi3660-reset";
+			hisi,rst-syscon = <&iomcu>;
+			#reset-cells = <2>;
+		};
+
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		uart5: serial@fdf05000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf05000 0x0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_UART6>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e8a0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e8a0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e8a0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 6 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e8a0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0e000 0x0 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e8a0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 18 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@e8a10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 26 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@e8a11000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a11000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 34 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@e8a12000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a12000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 41 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@e8a13000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a13000 0x0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 49 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@e8a14000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 57 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@e8a15000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a15000 0x0 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 65 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@e8a16000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a16000 0x0 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 73 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@e8a17000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a17000 0x0 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@e8a18000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a18000 0x0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@e8a19000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a19000 0x0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@e8a1a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1a000 0x0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@e8a1b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx5 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@e8a1c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx5 0 8 2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@fff28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff28000 0x0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 4 42 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_GPIO18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@fff29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff29000 0x0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 0 61 2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_GPIO19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@e8a1f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx7 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@e8a20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a20000 0x0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx7 0 8 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio22: gpio@fff0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO176 */
+			gpio-ranges = <&pmx1 2 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio23: gpio@fff0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO184 */
+			gpio-ranges = <&pmx1 0 6 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio24: gpio@fff0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO192 */
+			gpio-ranges = <&pmx1 0 14 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio25: gpio@fff0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0e000 0x0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO200 */
+			gpio-ranges = <&pmx1 0 22 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio26: gpio@fff0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO208 */
+			gpio-ranges = <&pmx1 0 30 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio27: gpio@fff10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO216 */
+			gpio-ranges = <&pmx1 4 31 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio28: gpio@fff1d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff1d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 1 35 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		/* UFS */
+		ufs: ufs@ff3c0000 {
+			compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3c0000 0x0 0x1000>,
+				<0x0 0xff3e0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+				 <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>,
+					<0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
+		/* SD */
+		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3670-dw-mshc",
+				     "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_SD>,
+				<&crg_ctrl HI3670_HCLK_GATE_SD>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
+			hisilicon,peripheral-syscon = <&sctrl>;
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* SDIO */
+		dwmmc2: dwmmc2@fc183000 {
+			compatible = "hisilicon,hi3670-dw-mshc",
+				     "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xfc183000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>,
+				<&crg_ctrl HI3670_HCLK_GATE_SDIO>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* I2C */
+		i2c0: i2c@ffd71000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd71000 0x0 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C0>;
+			resets = <&iomcu_rst 0x20 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffd72000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd72000 0x0 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C1>;
+			resets = <&iomcu_rst 0x20 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffd73000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd73000 0x0 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C2>;
+			resets = <&iomcu_rst 0x20 5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fdf0c000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>;
+			resets = <&crg_rst 0x78 7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@fdf0d000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>;
+			resets = <&crg_rst 0x78 27>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
new file mode 100644
index 000000000..7d370dac4
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS File for HiSilicon Poplar Development Board
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hi3798cv200.dtsi"
+#include "poplar-pinctrl.dtsi"
+
+/ {
+	model = "HiSilicon Poplar Development Board";
+	compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led0 {
+			label = "green:user1";
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user-led1 {
+			label = "green:user2";
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		user-led2 {
+			label = "green:user3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		user-led3 {
+			label = "green:user4";
+			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_PCIE0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 7 0>;
+		enable-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+		     &emmc_pins_3 &emmc_pins_4>;
+	fifo-depth = <256>;
+	clock-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&eth_phy1>;
+	phy-mode = "rgmii";
+	hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+	eth_phy1: phy@3 {
+		reg = <3>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+	gpio-line-names = "GPIO-E",	"",
+			  "",		"",
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
+};
+
+&gpio2 {
+	status = "okay";
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
+			  "",		"";
+};
+
+&gpio3 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
+};
+
+&gpio4 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"GPIO-D",
+			  "",		"";
+};
+
+&gpio5 {
+	status = "okay";
+	gpio-line-names = "",		"USER-LED-1",
+			  "USER-LED-2",	"",
+			  "",		"GPIO-A",
+			  "",		"";
+};
+
+&gpio6 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"USER-LED-0",
+			  "",		"",
+			  "",		"";
+};
+
+&gpio10 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"",
+			  "USER-LED-3",	"";
+};
+
+&i2c0 {
+	status = "okay";
+	label = "LS-I2C0";
+};
+
+&i2c2 {
+	status = "okay";
+	label = "LS-I2C1";
+};
+
+&ir {
+	linux,rc-map-name = "rc-hisi-poplar";
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&sd0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	label = "LS-SPI0";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+/* No optional LS-UART1 on Low Speed Expansion Connector. */
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
new file mode 100644
index 000000000..ed1b5a7a6
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DTS File for HiSilicon Hi3798cv200 SoC.
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/clock/histb-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+	compatible = "hisilicon,hi3798cv200";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf1001000 0x0 0x1000>,  /* GICD */
+		      <0x0 0xf1002000 0x0 0x100>;   /* GICC */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@f0000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0xf0000000 0x10000000>;
+
+		crg: clock-reset-controller@8a22000 {
+			compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd";
+			reg = <0x8a22000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+
+			gmacphyrst: reset-controller {
+				compatible = "ti,syscon-reset";
+				#reset-cells = <1>;
+				ti,reset-bits = <
+					0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+					0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+				>;
+			};
+		};
+
+		sysctrl: system-controller@8000000 {
+			compatible = "hisilicon,hi3798cv200-sysctrl", "syscon";
+			reg = <0x8000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+		};
+
+		perictrl: peripheral-controller@8a20000 {
+			compatible = "hisilicon,hi3798cv200-perictrl", "syscon",
+				     "simple-mfd";
+			reg = <0x8a20000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8a20000 0x1000>;
+
+			usb2_phy1: usb2_phy@120 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x120 0x4>;
+				clocks = <&crg HISTB_USB2_PHY1_REF_CLK>;
+				resets = <&crg 0xbc 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy1_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 8>;
+				};
+
+				usb2_phy1_port1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 9>;
+				};
+			};
+
+			usb2_phy2: usb2_phy@124 {
+				compatible = "hisilicon,hi3798cv200-usb2-phy";
+				reg = <0x124 0x4>;
+				clocks = <&crg HISTB_USB2_PHY2_REF_CLK>;
+				resets = <&crg 0xbc 6>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb2_phy2_port0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+					resets = <&crg 0xbc 10>;
+				};
+			};
+
+			combphy0: phy@850 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x850 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY0_CLK>;
+				resets = <&crg 0x188 4>;
+				assigned-clocks = <&crg HISTB_COMBPHY0_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,fixed-mode = <PHY_TYPE_USB3>;
+			};
+
+			combphy1: phy@858 {
+				compatible = "hisilicon,hi3798cv200-combphy";
+				reg = <0x858 0x8>;
+				#phy-cells = <1>;
+				clocks = <&crg HISTB_COMBPHY1_CLK>;
+				resets = <&crg 0x188 12>;
+				assigned-clocks = <&crg HISTB_COMBPHY1_CLK>;
+				assigned-clock-rates = <100000000>;
+				hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>;
+			};
+		};
+
+		pmx0: pinconf@8a21000 {
+			compatible = "pinconf-single";
+			reg = <0x8a21000 0x180>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			pinctrl-single,gpio-range = <
+				&range 0  8 2  /* GPIO 0 */
+				&range 8  1 0  /* GPIO 1 */
+				&range 9  4 2
+				&range 13 1 0
+				&range 14 1 1
+				&range 15 1 0
+				&range 16 5 0  /* GPIO 2 */
+				&range 21 3 1
+				&range 24 4 1  /* GPIO 3 */
+				&range 28 2 2
+				&range 86 1 1
+				&range 87 1 0
+				&range 30 4 2  /* GPIO 4 */
+				&range 34 3 0
+				&range 37 1 2
+				&range 38 3 2  /* GPIO 6 */
+				&range 41 5 0
+				&range 46 8 1  /* GPIO 7 */
+				&range 54 8 1  /* GPIO 8 */
+				&range 64 7 1  /* GPIO 9 */
+				&range 71 1 0
+				&range 72 6 1  /* GPIO 10 */
+				&range 78 1 0
+				&range 79 1 1
+				&range 80 6 1  /* GPIO 11 */
+				&range 70 2 1
+				&range 88 8 0  /* GPIO 12 */
+			>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		uart0: serial@8b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b00000 0x1000>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_UART0_CLK>, <&sysctrl HISTB_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@8b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x8b02000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_UART2_CLK>, <&crg HISTB_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@8b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b10000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C0_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@8b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b11000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C1_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@8b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b12000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C2_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@8b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b13000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C3_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@8b14000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0x8b14000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&crg HISTB_I2C4_CLK>;
+			status = "disabled";
+		};
+
+		spi0: spi@8b1a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8b1a000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			cs-gpios = <&gpio7 1 0>;
+			clocks = <&crg HISTB_SPI0_CLK>, <&crg HISTB_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sd0: mmc@9820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x9820000 0x10000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_SDIO0_BIU_CLK>,
+				 <&crg HISTB_SDIO0_CIU_CLK>;
+			clock-names = "biu", "ciu";
+			resets = <&crg 0x9c 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		emmc: mmc@9830000 {
+			compatible = "hisilicon,hi3798cv200-dw-mshc";
+			reg = <0x9830000 0x10000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_MMC_CIU_CLK>,
+				 <&crg HISTB_MMC_BIU_CLK>,
+				 <&crg HISTB_MMC_SAMPLE_CLK>,
+				 <&crg HISTB_MMC_DRV_CLK>;
+			clock-names = "ciu", "biu", "ciu-sample", "ciu-drive";
+			resets = <&crg 0xa0 4>;
+			reset-names = "reset";
+			status = "disabled";
+		};
+
+		gpio0: gpio@8b20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b20000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 0 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio1: gpio@8b21000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b21000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 8 1
+				&pmx0 1 9 4
+				&pmx0 5 13 1
+				&pmx0 6 14 1
+				&pmx0 7 15 1
+			>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio2: gpio@8b22000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b22000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio3: gpio@8b23000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b23000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 24 4
+				&pmx0 4 28 2
+				&pmx0 6 86 1
+				&pmx0 7 87 1
+			>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio4: gpio@8b24000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b24000 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio5: gpio@8004000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8004000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio6: gpio@8b26000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b26000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio7: gpio@8b27000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b27000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 46 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio8: gpio@8b28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b28000 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 54 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio9: gpio@8b29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b29000 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio10: gpio@8b2a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2a000 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio11: gpio@8b2b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2b000 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio12: gpio@8b2c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x8b2c000 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx0 0 88 8>;
+			clocks = <&crg HISTB_APB_CLK>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gmac0: ethernet@9840000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9840000 0x1000>,
+			      <0x984300c 0x4>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH0_MAC_CLK>,
+				 <&crg HISTB_ETH0_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 8>,
+				 <&crg 0xcc 10>,
+				 <&gmacphyrst 0>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@9841000 {
+			compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
+			reg = <0x9841000 0x1000>,
+			      <0x9843010 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_ETH1_MAC_CLK>,
+				 <&crg HISTB_ETH1_MACIF_CLK>;
+			clock-names = "mac_core", "mac_ifc";
+			resets = <&crg 0xcc 9>,
+				 <&crg 0xcc 11>,
+				 <&gmacphyrst 1>;
+			reset-names = "mac_core", "mac_ifc", "phy";
+			status = "disabled";
+		};
+
+		ir: ir@8001000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x8001000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl HISTB_IR_CLK>;
+			status = "disabled";
+		};
+
+		pcie: pcie@9860000 {
+			compatible = "hisilicon,hi3798cv200-pcie";
+			reg = <0x9860000 0x1000>,
+			      <0x0 0x2000>,
+			      <0x2000000 0x01000000>;
+			reg-names = "control", "rc-dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>,
+				 <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_PCIE_AUX_CLK>,
+				 <&crg HISTB_PCIE_PIPE_CLK>,
+				 <&crg HISTB_PCIE_SYS_CLK>,
+				 <&crg HISTB_PCIE_BUS_CLK>;
+			clock-names = "aux", "pipe", "sys", "bus";
+			resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+			reset-names = "soft", "sys", "bus";
+			phys = <&combphy1 PHY_TYPE_PCIE>;
+			phy-names = "phy";
+			status = "disabled";
+		};
+
+		ohci: usb@9880000 {
+			compatible = "generic-ohci";
+			reg = <0x9880000 0x10000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_12M_CLK>,
+				 <&crg HISTB_USB2_48M_CLK>;
+			clock-names = "bus", "clk12", "clk48";
+			resets = <&crg 0xb8 12>;
+			reset-names = "bus";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci: usb@9890000 {
+			compatible = "generic-ehci";
+			reg = <0x9890000 0x10000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HISTB_USB2_BUS_CLK>,
+				 <&crg HISTB_USB2_PHY_CLK>,
+				 <&crg HISTB_USB2_UTMI_CLK>;
+			clock-names = "bus", "phy", "utmi";
+			resets = <&crg 0xb8 12>,
+				 <&crg 0xb8 16>,
+				 <&crg 0xb8 13>;
+			reset-names = "bus", "phy", "utmi";
+			phys = <&usb2_phy1_port0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
new file mode 100644
index 000000000..3f387f4cf
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * dtsi file for Hisilicon Hi6220 coresight
+ *
+ * Copyright (C) 2017 HiSilicon Ltd.
+ *
+ * Author: Pengcheng Li <lipengcheng8@huawei.com>
+ *         Leo Yan <leo.yan@linaro.org>
+ */
+
+/ {
+	soc {
+		funnel@f6401000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xf6401000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					soc_funnel_out: endpoint {
+						remote-endpoint =
+							<&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					soc_funnel_in: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@f6402000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xf6402000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+							<&soc_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+							<&replicator_in>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-static-replicator";
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+							<&etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint =
+							<&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint =
+							<&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etr@f6404000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xf6404000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+							<&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@f6405000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0 0xf6405000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+							<&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@f6501000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0xf6501000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					acpu_funnel_out: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					acpu_funnel_in0: endpoint {
+						remote-endpoint =
+							<&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					acpu_funnel_in1: endpoint {
+						remote-endpoint =
+							<&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					acpu_funnel_in2: endpoint {
+						remote-endpoint =
+							<&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					acpu_funnel_in3: endpoint {
+						remote-endpoint =
+							<&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					acpu_funnel_in4: endpoint {
+						remote-endpoint =
+							<&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					acpu_funnel_in5: endpoint {
+						remote-endpoint =
+							<&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					acpu_funnel_in6: endpoint {
+						remote-endpoint =
+							<&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					acpu_funnel_in7: endpoint {
+						remote-endpoint =
+							<&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm@f659c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659c000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@f659d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659d000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@f659e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659e000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@f659f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659f000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@f65dc000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65dc000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu4>;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@f65dd000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65dd000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu5>;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm@f65de000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65de000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu6>;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm@f65df000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65df000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu7>;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&acpu_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		/* System CTIs */
+		/* CTI 0 - TMC and TPIU connections */
+		cti@f6403000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf6403000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+		};
+
+		/* CTI - CPU-0 */
+		cti@f6598000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf6598000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu0>;
+			arm,cs-dev-assoc = <&etm0>;
+		};
+
+		/* CTI - CPU-1 */
+		cti@f6599000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf6599000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu1>;
+			arm,cs-dev-assoc = <&etm1>;
+		};
+
+		/* CTI - CPU-2 */
+		cti@f659a000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf659a000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu2>;
+			arm,cs-dev-assoc = <&etm2>;
+		};
+
+		/* CTI - CPU-3 */
+		cti@f659b000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf659b000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu3>;
+			arm,cs-dev-assoc = <&etm3>;
+		};
+
+		/* CTI - CPU-4 */
+		cti@f65d8000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65d8000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu4>;
+			arm,cs-dev-assoc = <&etm4>;
+		};
+
+		/* CTI - CPU-5 */
+		cti@f65d9000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65d9000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu5>;
+			arm,cs-dev-assoc = <&etm5>;
+		};
+
+		/* CTI - CPU-6 */
+		cti@f65da000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65da000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu6>;
+			arm,cs-dev-assoc = <&etm6>;
+		};
+
+		/* CTI - CPU-7 */
+		cti@f65db000 {
+			compatible = "arm,coresight-cti-v8-arch",
+				     "arm,coresight-cti", "arm,primecell";
+			reg = <0 0xf65db000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu7>;
+			arm,cs-dev-assoc = <&etm7>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
new file mode 100644
index 000000000..f0672ec65
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey Development Board
+ *
+ * Copyright (C) 2015, HiSilicon Ltd.
+ *
+ */
+
+/dts-v1/;
+#include "hi6220.dtsi"
+#include "hikey-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "HiKey Development Board";
+	compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+
+	aliases {
+		serial0 = &uart0; /* On board UART0 */
+		serial1 = &uart1; /* BT UART */
+		serial2 = &uart2; /* LS Expansion UART0 */
+		serial3 = &uart3; /* LS Expansion UART1 */
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/*
+	 * Reserve below regions from memory node:
+	 *
+	 *  0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+	 *  0x05f0,1000 - 0x05f0,1fff: Reboot reason
+	 *  0x06df,f000 - 0x06df,ffff: Mailbox message data
+	 *  0x0740,f000 - 0x0740,ffff: MCU firmware section
+	 *  0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer
+	 *  0x3e00,0000 - 0x3fff,ffff: OP-TEE
+	 */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
+		      <0x00000000 0x05f00000 0x00000000 0x00001000>,
+		      <0x00000000 0x05f02000 0x00000000 0x00efd000>,
+		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
+		      <0x00000000 0x07410000 0x00000000 0x1aaf0000>,
+		      <0x00000000 0x22000000 0x00000000 0x1c000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@21f00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x21f00000 0x0 0x00100000>;
+			record-size = <0x00020000>;
+			console-size = <0x00020000>;
+			ftrace-size = <0x00020000>;
+		};
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x00000000 0x08000000>;
+			linux,cma-default;
+		};
+	};
+
+	reboot-mode-syscon@5f01000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x05f01000 0x0 0x00001000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x0>;
+
+			mode-normal = <0x77665501>;
+			mode-bootloader = <0x77665500>;
+			mode-recovery = <0x77665502>;
+		};
+	};
+
+	reg_sys_5v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vdd_3v3: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	reg_5v_hub: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio0 7 0>;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	wl1835_pwrseq: wl1835-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/* WLAN_EN GPIO */
+		reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <10>;
+		power-off-delay-us = <10>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user-1 {
+			label = "green:user1";
+			gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user-2 {
+			label = "green:user2";
+			gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user-3 {
+			label = "green:user3";
+			gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */
+			linux,default-trigger = "mmc1";
+		};
+
+		led-user-4 {
+			label = "green:user4";
+			gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-bt {
+			label = "blue:bt";
+			gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		#clock-cells = <0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			ldo2: LDO2 {
+				regulator-name = "LDO2_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo7: LDO7 {
+				regulator-name = "LDO7_SDIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo10: LDO10 {
+				regulator-name = "LDO10_2V85";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo13: LDO13 {
+				regulator-name = "LDO13_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo14: LDO14 {
+				regulator-name = "LDO14_2V8";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo15: LDO15 {
+				regulator-name = "LDO15_1V8";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo17: LDO17 {
+				regulator-name = "LDO17_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo19: LDO19 {
+				regulator-name = "LDO19_3V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <360>;
+			};
+
+			ldo21: LDO21 {
+				regulator-name = "LDO21_1V8";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			ldo22: LDO22 {
+				regulator-name = "LDO22_1V2";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <120>;
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		dais = <&i2s0_port0>;
+	};
+};
+
+&uart1 {
+	assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+	assigned-clock-rates = <150000000>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+
+&uart3 {
+	status = "okay";
+	label = "LS-UART1";
+};
+
+&ade {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		/* 1 for output port */
+		port@1 {
+			reg = <1>;
+
+			dsi_out0: endpoint@0 {
+				remote-endpoint = <&adv7533_in>;
+			};
+		};
+	};
+};
+
+&dwmmc_0 {
+	cap-mmc-highspeed;
+	non-removable;
+	bus-width = <0x8>;
+	vmmc-supply = <&ldo19>;
+};
+
+&dwmmc_1 {
+	card-detect-delay = <200>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	vqmmc-supply = <&ldo7>;
+	vmmc-supply = <&ldo10>;
+	bus-width = <0x4>;
+	disable-wp;
+	cd-gpios = <&gpio1 0 1>;
+};
+
+&dwmmc_2 {
+	bus-width = <0x4>;
+	non-removable;
+	cap-power-off-card;
+	vmmc-supply = <&reg_vdd_3v3>;
+	mmc-pwrseq = <&wl1835_pwrseq>;
+
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;	/* sdio func num */
+		/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (not routed from the SoC)
+ *         "[PER]" = pin is muxed for peripheral (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Pin assignments taken from LeMaker and CircuitCo Schematics
+ * Rev A1.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	gpio-line-names = "PWR_HOLD", "DSI_SEL",
+	"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
+	"PWRON_DET", "5V_HUB_EN";
+};
+
+&gpio1 {
+	gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
+	"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
+		"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
+		"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
+		"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
+		"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
+		"USB_ID_DET", "USB_VBUS_DET",
+		"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
+};
+
+&gpio3 {
+	gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
+	"WLAN_ACTIVE", "NC", "NC";
+};
+
+&gpio4 {
+	gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
+	"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
+};
+
+&gpio5 {
+	gpio-line-names = "NC", "NC",
+	"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
+	"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
+	"[AUX_SSI1]", "NC",
+	"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
+	"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
+};
+
+&gpio6 {
+	gpio-line-names =
+	"[SPI0_DIN]", /* Pin 10: SPI0_DI */
+	"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
+	"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
+	"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
+	"NC", "NC", "NC",
+	"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
+};
+
+&gpio7 {
+	gpio-line-names = "NC", "NC", "NC", "NC",
+	"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
+	"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
+	"NC", "NC";
+};
+
+&gpio8 {
+	gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
+	"", "", "", "", "", "";
+};
+
+&gpio9 {
+	gpio-line-names = "",
+	"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
+	"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
+	"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
+};
+
+&gpio10 {
+	gpio-line-names = "BOOT_SEL",
+	"[ISP_CCLK1]",
+	"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
+	"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
+	"NC", "NC",
+	"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
+	"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
+};
+
+&gpio11 {
+	gpio-line-names =
+	"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
+	"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
+	"", "NC", "NC", "NC", "", "";
+};
+
+&gpio12 {
+	gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
+	"[BT_PCM_DO]",
+	"NC", "NC", "NC", "NC",
+	"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
+};
+
+&gpio13 {
+	gpio-line-names = "[UART0_RX]", "[UART0_TX]",
+	"[BT_UART1_CTS]", "[BT_UART1_RTS]",
+	"[BT_UART1_RX]", "[BT_UART1_TX]",
+	"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
+	"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
+};
+
+&gpio14 {
+	gpio-line-names =
+	"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
+	"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
+	"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
+	"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
+	"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
+	"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
+	"[I2C2_SCL]", "[I2C2_SDA]";
+};
+
+&gpio15 {
+	gpio-line-names = "", "", "", "", "", "", "NC", "";
+};
+
+/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	adv7533: adv7533@39 {
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 2>;
+		pd-gpios = <&gpio0 4 0>;
+		adi,dsi-lanes = <4>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				adv7533_in: endpoint {
+					remote-endpoint = <&dsi_out0>;
+				};
+			};
+			port@2 {
+				reg = <2>;
+				codec_endpoint: endpoint {
+					remote-endpoint = <&i2s0_cpu_endpoint>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+
+	ports {
+		i2s0_port0: port@0 {
+			i2s0_cpu_endpoint: endpoint {
+				remote-endpoint = <&codec_endpoint>;
+				dai-format = "i2s";
+			};
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
new file mode 100644
index 000000000..be808bb25
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -0,0 +1,1070 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi6220 SoC
+ *
+ * Copyright (C) 2015, HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/hisi,hi6220-resets.h>
+#include <dt-bindings/clock/hi6220-clock.h>
+#include <dt-bindings/pinctrl/hisi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "hisilicon,hi6220";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <700>;
+				exit-latency-us = <250>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2700>;
+				wakeup-latency-us = <1500>;
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER0_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&CLUSTER1_L2>;
+			clocks = <&stub_clock 0>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
+		};
+
+		CLUSTER0_L2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		CLUSTER1_L2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <208000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <432000000>;
+			opp-microvolt = <1040000>;
+			clock-latency-ns = <500000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <729000000>;
+			opp-microvolt = <1090000>;
+			clock-latency-ns = <500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1180000>;
+			clock-latency-ns = <500000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1330000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	gic: interrupt-controller@f6801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
+		      <0x0 0xf6802000 0 0x2000>, /* GICC */
+		      <0x0 0xf6804000 0 0x2000>, /* GICH */
+		      <0x0 0xf6806000 0 0x2000>; /* GICV */
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sram: sram@fff80000 {
+			compatible = "hisilicon,hi6220-sramctrl", "syscon";
+			reg = <0x0 0xfff80000 0x0 0x12000>;
+		};
+
+		ao_ctrl: ao_ctrl@f7800000 {
+			compatible = "hisilicon,hi6220-aoctrl", "syscon";
+			reg = <0x0 0xf7800000 0x0 0x2000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sys_ctrl: sys_ctrl@f7030000 {
+			compatible = "hisilicon,hi6220-sysctrl", "syscon";
+			reg = <0x0 0xf7030000 0x0 0x2000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		media_ctrl: media_ctrl@f4410000 {
+			compatible = "hisilicon,hi6220-mediactrl", "syscon";
+			reg = <0x0 0xf4410000 0x0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pm_ctrl: pm_ctrl@f7032000 {
+			compatible = "hisilicon,hi6220-pmctrl", "syscon";
+			reg = <0x0 0xf7032000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		acpu_sctrl: acpu_sctrl@f6504000 {
+			compatible = "hisilicon,hi6220-acpu-sctrl", "syscon";
+			reg = <0x0 0xf6504000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		medianoc_ade: medianoc_ade@f4520000 {
+			compatible = "syscon";
+			reg = <0x0 0xf4520000 0x0 0x4000>;
+		};
+
+		stub_clock: stub_clock {
+			compatible = "hisilicon,hi6220-stub-clk";
+			hisilicon,hi6220-clk-sram = <&sram>;
+			#clock-cells = <1>;
+			mbox-names = "mbox-tx";
+			mboxes = <&mailbox 1 0 11>;
+		};
+
+		uart0: serial@f8015000 {	/* console */
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf8015000 0x0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+				 <&ao_ctrl HI6220_UART0_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: serial@f7111000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7111000 0x0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+				 <&sys_ctrl HI6220_UART1_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>;
+			dmas = <&dma0 8 &dma0 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@f7112000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7112000 0x0 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+				 <&sys_ctrl HI6220_UART2_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@f7113000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7113000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+				 <&sys_ctrl HI6220_UART3_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@f7114000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7114000 0x0 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+				 <&sys_ctrl HI6220_UART4_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		dma0: dma@f7370000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0x0 0xf7370000 0x0 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+			dma-requests = <32>;
+			interrupts = <0 84 4>;
+			clocks = <&sys_ctrl HI6220_EDMAC_ACLK>;
+			dma-no-cci;
+			dma-type = "hi6220_dma";
+			status = "okay";
+		};
+
+		dual_timer0: timer@f8008000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xf8008000 0x0 0x1000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl HI6220_TIMER0_PCLK>,
+				 <&ao_ctrl HI6220_TIMER0_PCLK>,
+				 <&ao_ctrl HI6220_TIMER0_PCLK>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		rtc0: rtc@f8003000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8003000 0x0 0x1000>;
+			interrupts = <0 12 4>;
+			clocks = <&ao_ctrl HI6220_RTC0_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc1: rtc@f8004000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x0 0xf8004000 0x0 0x1000>;
+			interrupts = <0 8 4>;
+			clocks = <&ao_ctrl HI6220_RTC1_PCLK>;
+			clock-names = "apb_pclk";
+		};
+
+		pmx0: pinmux@f7010000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xf7010000  0x0 0x27c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <3>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			pinctrl-single,gpio-range = <
+				&range  80  8 MUX_M0 /* gpio  3: [0..7] */
+				&range  88  8 MUX_M0 /* gpio  4: [0..7] */
+				&range  96  8 MUX_M0 /* gpio  5: [0..7] */
+				&range 104  8 MUX_M0 /* gpio  6: [0..7] */
+				&range 112  8 MUX_M0 /* gpio  7: [0..7] */
+				&range 120  2 MUX_M0 /* gpio  8: [0..1] */
+				&range   2  6 MUX_M1 /* gpio  8: [2..7] */
+				&range   8  8 MUX_M1 /* gpio  9: [0..7] */
+				&range   0  1 MUX_M1 /* gpio 10: [0]    */
+				&range  16  7 MUX_M1 /* gpio 10: [1..7] */
+				&range  23  3 MUX_M1 /* gpio 11: [0..2] */
+				&range  28  5 MUX_M1 /* gpio 11: [3..7] */
+				&range  33  3 MUX_M1 /* gpio 12: [0..2] */
+				&range  43  5 MUX_M1 /* gpio 12: [3..7] */
+				&range  48  8 MUX_M1 /* gpio 13: [0..7] */
+				&range  56  8 MUX_M1 /* gpio 14: [0..7] */
+				&range  74  6 MUX_M1 /* gpio 15: [0..5] */
+				&range 122  1 MUX_M1 /* gpio 15: [6]    */
+				&range 126  1 MUX_M1 /* gpio 15: [7]    */
+				&range 127  8 MUX_M1 /* gpio 16: [0..7] */
+				&range 135  8 MUX_M1 /* gpio 17: [0..7] */
+				&range 143  8 MUX_M1 /* gpio 18: [0..7] */
+				&range 151  8 MUX_M1 /* gpio 19: [0..7] */
+			>;
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		pmx1: pinmux@f7010800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xf7010800 0x0 0x28c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+		};
+
+		pmx2: pinmux@f8001800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xf8001800 0x0 0x78>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <32>;
+		};
+
+		gpio0: gpio@f8011000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8011000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@f8012000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8012000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@f8013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8013000 0x0 0x1000>;
+			interrupts = <0 54 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@f8014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf8014000 0x0 0x1000>;
+			interrupts = <0 55 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 80 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@f7020000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7020000 0x0 0x1000>;
+			interrupts = <0 56 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 88 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@f7021000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7021000 0x0 0x1000>;
+			interrupts = <0 57 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 96 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@f7022000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7022000 0x0 0x1000>;
+			interrupts = <0 58 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 104 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@f7023000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7023000 0x0 0x1000>;
+			interrupts = <0 59 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 112 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@f7024000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7024000 0x0 0x1000>;
+			interrupts = <0 60 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@f7025000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7025000 0x0 0x1000>;
+			interrupts = <0 61 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 8 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@f7026000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7026000 0x0 0x1000>;
+			interrupts = <0 62 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@f7027000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7027000 0x0 0x1000>;
+			interrupts = <0 63 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@f7028000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7028000 0x0 0x1000>;
+			interrupts = <0 64 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@f7029000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf7029000 0x0 0x1000>;
+			interrupts = <0 65 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 48 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@f702a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702a000 0x0 0x1000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 56 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@f702b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702b000 0x0 0x1000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <
+				&pmx0 0 74 6
+				&pmx0 6 122 1
+				&pmx0 7 126 1
+			>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@f702c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702c000 0x0 0x1000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 127 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@f702d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702d000 0x0 0x1000>;
+			interrupts = <0 69 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 135 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@f702e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702e000 0x0 0x1000>;
+			interrupts = <0 70 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 143 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@f702f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xf702f000 0x0 0x1000>;
+			interrupts = <0 71 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 151 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&ao_ctrl 2>;
+			clock-names = "apb_pclk";
+		};
+
+		spi0: spi@f7106000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xf7106000 0x0 0x1000>;
+			interrupts = <0 50 4>;
+			bus-id = <0>;
+			enable-dma = <0>;
+			clocks = <&sys_ctrl HI6220_SPI_CLK>, <&sys_ctrl HI6220_SPI_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
+			num-cs = <1>;
+			cs-gpios = <&gpio6 2 0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@f7100000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xf7100000 0x0 0x1000>;
+			interrupts = <0 44 4>;
+			clocks = <&sys_ctrl HI6220_I2C0_CLK>;
+			i2c-sda-hold-time-ns = <300>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@f7101000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xf7101000 0x0 0x1000>;
+			clocks = <&sys_ctrl HI6220_I2C1_CLK>;
+			interrupts = <0 45 4>;
+			i2c-sda-hold-time-ns = <300>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@f7102000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xf7102000 0x0 0x1000>;
+			clocks = <&sys_ctrl HI6220_I2C2_CLK>;
+			interrupts = <0 46 4>;
+			i2c-sda-hold-time-ns = <300>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+			status = "disabled";
+		};
+
+		usb_phy: usbphy {
+			compatible = "hisilicon,hi6220-usb-phy";
+			#phy-cells = <0>;
+			phy-supply = <&reg_5v_hub>;
+			hisilicon,peripheral-syscon = <&sys_ctrl>;
+		};
+
+		usb: usb@f72c0000 {
+			compatible = "hisilicon,hi6220-usb";
+			reg = <0x0 0xf72c0000 0x0 0x40000>;
+			phys = <&usb_phy>;
+			phy-names = "usb2-phy";
+			clocks = <&sys_ctrl HI6220_USBOTG_HCLK>;
+			clock-names = "otg";
+			dr_mode = "otg";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <128>;
+			g-tx-fifo-size = <128 128 128 128 128 128 128 128
+					   16  16  16  16  16  16  16>;
+			interrupts = <0 77 0x4>;
+		};
+
+		mailbox: mailbox@f7510000 {
+			compatible = "hisilicon,hi6220-mbox";
+			reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */
+			      <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <3>;
+		};
+
+		dwmmc_0: dwmmc0@f723d000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			reg = <0x0 0xf723d000 0x0 0x1000>;
+			interrupts = <0x0 0x48 0x4>;
+			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
+			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
+			reset-names = "reset";
+			pinctrl-names = "default";
+			pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
+				     &emmc_cfg_func &emmc_rst_cfg_func>;
+		};
+
+		dwmmc_1: dwmmc1@f723e000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			hisilicon,peripheral-syscon = <&ao_ctrl>;
+			reg = <0x0 0xf723e000 0x0 0x1000>;
+			interrupts = <0x0 0x49 0x4>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
+			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
+			reset-names = "reset";
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+			pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+		};
+
+		dwmmc_2: dwmmc2@f723f000 {
+			compatible = "hisilicon,hi6220-dw-mshc";
+			reg = <0x0 0xf723f000 0x0 0x1000>;
+			interrupts = <0x0 0x4a 0x4>;
+			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
+			clock-names = "ciu", "biu";
+			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
+			reset-names = "reset";
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
+			pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
+		};
+
+		watchdog0: watchdog@f8005000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xf8005000 0x0 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ao_ctrl HI6220_WDT0_PCLK>,
+				 <&ao_ctrl HI6220_WDT0_PCLK>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		tsensor: tsensor@0,f7030700 {
+			compatible = "hisilicon,tsensor";
+			reg = <0x0 0xf7030700 0x0 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl 22>;
+			clock-names = "thermal_clk";
+			#thermal-sensor-cells = <1>;
+		};
+
+		i2s0: i2s@f7118000 {
+			compatible = "hisilicon,hi6210-i2s";
+			reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
+			clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
+				 <&sys_ctrl HI6220_BBPPLL0_DIV>;
+			clock-names = "dacodec", "i2s-base";
+			dmas = <&dma0 15 &dma0 14>;
+			dma-names = "rx", "tx";
+			hisilicon,sysctrl-syscon = <&sys_ctrl>;
+			#sound-dai-cells = <1>;
+		};
+
+		thermal-zones {
+
+			cls0: cls0-thermal {
+				polling-delay = <1000>;
+				polling-delay-passive = <100>;
+				sustainable-power = <3326>;
+
+				/* sensor ID */
+				thermal-sensors = <&tsensor 2>;
+
+				trips {
+					threshold: trip-point0 {
+						temperature = <65000>;
+						hysteresis = <0>;
+						type = "passive";
+					};
+
+					target: trip-point1 {
+						temperature = <75000>;
+						hysteresis = <0>;
+						type = "passive";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&target>;
+						cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
+		ade: ade@f4100000 {
+			compatible = "hisilicon,hi6220-ade";
+			reg = <0x0 0xf4100000 0x0 0x7800>;
+			reg-names = "ade_base";
+			hisilicon,noc-syscon = <&medianoc_ade>;
+			resets = <&media_ctrl MEDIA_ADE>;
+			interrupts = <0 115 4>; /* ldi interrupt */
+
+			clocks = <&media_ctrl HI6220_ADE_CORE>,
+				 <&media_ctrl HI6220_CODEC_JPEG>,
+				 <&media_ctrl HI6220_ADE_PIX_SRC>;
+			/*clock name*/
+			clock-names  = "clk_ade_core",
+				       "clk_codec_jpeg",
+				       "clk_ade_pix";
+
+			assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+				<&media_ctrl HI6220_CODEC_JPEG>;
+			assigned-clock-rates = <360000000>, <288000000>;
+			dma-coherent;
+			status = "disabled";
+
+			port {
+				ade_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+		dsi: dsi@f4107800 {
+			compatible = "hisilicon,hi6220-dsi";
+			reg = <0x0 0xf4107800 0x0 0x100>;
+			clocks = <&media_ctrl  HI6220_DSI_PCLK>;
+			clock-names = "pclk";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 0 for input port */
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ade_out>;
+					};
+				};
+			};
+		};
+
+		debug@f6590000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6590000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+		};
+
+		debug@f6592000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6592000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+		};
+
+		debug@f6594000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6594000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+		};
+
+		debug@f6596000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf6596000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+		};
+
+		debug@f65d0000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d0000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+		};
+
+		debug@f65d2000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d2000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+		};
+
+		debug@f65d4000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d4000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+		};
+
+		debug@f65d6000 {
+			compatible = "arm,coresight-cpu-debug","arm,primecell";
+			reg = <0 0xf65d6000 0 0x1000>;
+			clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+		};
+
+		mali: gpu@f4080000 {
+			compatible = "hisilicon,hi6220-mali", "arm,mali-450";
+			reg = <0x0 0xf4080000 0x0 0x00040000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3";
+			clocks = <&media_ctrl HI6220_G3D_CLK>,
+				 <&media_ctrl HI6220_G3D_PCLK>;
+			clock-names = "bus", "core";
+			assigned-clocks = <&media_ctrl HI6220_G3D_CLK>,
+					  <&media_ctrl HI6220_G3D_PCLK>;
+			assigned-clock-rates = <500000000>, <144000000>;
+			reset-names = "ao_g3d", "media_g3d";
+			resets = <&ao_ctrl AO_G3D>, <&media_ctrl MEDIA_G3D>;
+		};
+	};
+};
+
+#include "hi6220-coresight.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
new file mode 100644
index 000000000..3e27624c3
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * pinctrl dts fils for Hislicon HiKey development board
+ *
+ */
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		pmx0: pinmux@f7010000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <
+				&boot_sel_pmx_func
+				&hkadc_ssi_pmx_func
+				&codec_clk_pmx_func
+				&pwm_in_pmx_func
+				&bl_pwm_pmx_func
+				>;
+
+			boot_sel_pmx_func: boot-sel-pins {
+				pinctrl-single,pins = <
+					0x0    MUX_M0	/* BOOT_SEL     (IOMG000) */
+				>;
+			};
+
+			emmc_pmx_func: emmc-pins {
+				pinctrl-single,pins = <
+					0x100  MUX_M0	/* EMMC_CLK     (IOMG064) */
+					0x104  MUX_M0	/* EMMC_CMD     (IOMG065) */
+					0x108  MUX_M0	/* EMMC_DATA0   (IOMG066) */
+					0x10c  MUX_M0	/* EMMC_DATA1   (IOMG067) */
+					0x110  MUX_M0	/* EMMC_DATA2   (IOMG068) */
+					0x114  MUX_M0	/* EMMC_DATA3   (IOMG069) */
+					0x118  MUX_M0	/* EMMC_DATA4   (IOMG070) */
+					0x11c  MUX_M0	/* EMMC_DATA5   (IOMG071) */
+					0x120  MUX_M0	/* EMMC_DATA6   (IOMG072) */
+					0x124  MUX_M0	/* EMMC_DATA7   (IOMG073) */
+				>;
+			};
+
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0xc    MUX_M0	/* SD_CLK       (IOMG003) */
+					0x10   MUX_M0	/* SD_CMD       (IOMG004) */
+					0x14   MUX_M0	/* SD_DATA0     (IOMG005) */
+					0x18   MUX_M0	/* SD_DATA1     (IOMG006) */
+					0x1c   MUX_M0	/* SD_DATA2     (IOMG007) */
+					0x20   MUX_M0	/* SD_DATA3     (IOMG008) */
+				>;
+			};
+			sd_pmx_idle: sd-idle-pins {
+				pinctrl-single,pins = <
+					0xc    MUX_M1	/* SD_CLK       (IOMG003) */
+					0x10   MUX_M1	/* SD_CMD       (IOMG004) */
+					0x14   MUX_M1	/* SD_DATA0     (IOMG005) */
+					0x18   MUX_M1	/* SD_DATA1     (IOMG006) */
+					0x1c   MUX_M1	/* SD_DATA2     (IOMG007) */
+					0x20   MUX_M1	/* SD_DATA3     (IOMG008) */
+				>;
+			};
+
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x128  MUX_M0	/* SDIO_CLK     (IOMG074) */
+					0x12c  MUX_M0	/* SDIO_CMD     (IOMG075) */
+					0x130  MUX_M0	/* SDIO_DATA0   (IOMG076) */
+					0x134  MUX_M0	/* SDIO_DATA1   (IOMG077) */
+					0x138  MUX_M0	/* SDIO_DATA2   (IOMG078) */
+					0x13c  MUX_M0	/* SDIO_DATA3   (IOMG079) */
+				>;
+			};
+			sdio_pmx_idle: sdio-idle-pins {
+				pinctrl-single,pins = <
+					0x128  MUX_M1	/* SDIO_CLK     (IOMG074) */
+					0x12c  MUX_M1	/* SDIO_CMD     (IOMG075) */
+					0x130  MUX_M1	/* SDIO_DATA0   (IOMG076) */
+					0x134  MUX_M1	/* SDIO_DATA1   (IOMG077) */
+					0x138  MUX_M1	/* SDIO_DATA2   (IOMG078) */
+					0x13c  MUX_M1	/* SDIO_DATA3   (IOMG079) */
+				>;
+			};
+
+			isp_pmx_func: isp-pins {
+				pinctrl-single,pins = <
+					0x24   MUX_M0	/* ISP_PWDN0    (IOMG009) */
+					0x28   MUX_M0	/* ISP_PWDN1    (IOMG010) */
+					0x2c   MUX_M0	/* ISP_PWDN2    (IOMG011) */
+					0x30   MUX_M1	/* ISP_SHUTTER0 (IOMG012) */
+					0x34   MUX_M1	/* ISP_SHUTTER1 (IOMG013) */
+					0x38   MUX_M1	/* ISP_PWM      (IOMG014) */
+					0x3c   MUX_M0	/* ISP_CCLK0    (IOMG015) */
+					0x40   MUX_M0	/* ISP_CCLK1    (IOMG016) */
+					0x44   MUX_M0	/* ISP_RESETB0  (IOMG017) */
+					0x48   MUX_M0	/* ISP_RESETB1  (IOMG018) */
+					0x4c   MUX_M1	/* ISP_STROBE0  (IOMG019) */
+					0x50   MUX_M1	/* ISP_STROBE1  (IOMG020) */
+					0x54   MUX_M0	/* ISP_SDA0     (IOMG021) */
+					0x58   MUX_M0	/* ISP_SCL0     (IOMG022) */
+					0x5c   MUX_M0	/* ISP_SDA1     (IOMG023) */
+					0x60   MUX_M0	/* ISP_SCL1     (IOMG024) */
+				>;
+			};
+
+			hkadc_ssi_pmx_func: hkadc-ssi-pins {
+				pinctrl-single,pins = <
+					0x68   MUX_M0	/* HKADC_SSI    (IOMG026) */
+				>;
+			};
+
+			codec_clk_pmx_func: codec-clk-pins {
+				pinctrl-single,pins = <
+					0x6c   MUX_M0	/* CODEC_CLK    (IOMG027) */
+				>;
+			};
+
+			codec_pmx_func: codec-pins {
+				pinctrl-single,pins = <
+					0x70   MUX_M1	/* DMIC_CLK     (IOMG028) */
+					0x74   MUX_M0	/* CODEC_SYNC   (IOMG029) */
+					0x78   MUX_M0	/* CODEC_DI     (IOMG030) */
+					0x7c   MUX_M0	/* CODEC_DO     (IOMG031) */
+				>;
+			};
+
+			fm_pmx_func: fm-pins {
+				pinctrl-single,pins = <
+					0x80   MUX_M1	/* FM_XCLK      (IOMG032) */
+					0x84   MUX_M1	/* FM_XFS       (IOMG033) */
+					0x88   MUX_M1	/* FM_DI        (IOMG034) */
+					0x8c   MUX_M1	/* FM_DO        (IOMG035) */
+				>;
+			};
+
+			bt_pmx_func: bt-pins {
+				pinctrl-single,pins = <
+					0x90   MUX_M0	/* BT_XCLK      (IOMG036) */
+					0x94   MUX_M0	/* BT_XFS       (IOMG037) */
+					0x98   MUX_M0	/* BT_DI        (IOMG038) */
+					0x9c   MUX_M0	/* BT_DO        (IOMG039) */
+				>;
+			};
+
+			pwm_in_pmx_func: pwm-in-pins {
+				pinctrl-single,pins = <
+					0xb8   MUX_M1	/* PWM_IN       (IOMG046) */
+				>;
+			};
+
+			bl_pwm_pmx_func: bl-pwm-pins {
+				pinctrl-single,pins = <
+					0xbc   MUX_M1	/* BL_PWM       (IOMG047) */
+				>;
+			};
+
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0xc0   MUX_M0	/* UART0_RXD    (IOMG048) */
+					0xc4   MUX_M0	/* UART0_TXD    (IOMG049) */
+				>;
+			};
+
+			uart1_pmx_func: uart1-pins {
+				pinctrl-single,pins = <
+					0xc8   MUX_M0	/* UART1_CTS_N  (IOMG050) */
+					0xcc   MUX_M0	/* UART1_RTS_N  (IOMG051) */
+					0xd0   MUX_M0	/* UART1_RXD    (IOMG052) */
+					0xd4   MUX_M0	/* UART1_TXD    (IOMG053) */
+				>;
+			};
+
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0xd8   MUX_M0	/* UART2_CTS_N  (IOMG054) */
+					0xdc   MUX_M0	/* UART2_RTS_N  (IOMG055) */
+					0xe0   MUX_M0	/* UART2_RXD    (IOMG056) */
+					0xe4   MUX_M0	/* UART2_TXD    (IOMG057) */
+				>;
+			};
+
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x180  MUX_M1	/* UART3_CTS_N  (IOMG096) */
+					0x184  MUX_M1	/* UART3_RTS_N  (IOMG097) */
+					0x188  MUX_M1	/* UART3_RXD    (IOMG098) */
+					0x18c  MUX_M1	/* UART3_TXD    (IOMG099) */
+				>;
+			};
+
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x1d0  MUX_M1	/* UART4_CTS_N  (IOMG116) */
+					0x1d4  MUX_M1	/* UART4_RTS_N  (IOMG117) */
+					0x1d8  MUX_M1	/* UART4_RXD    (IOMG118) */
+					0x1dc  MUX_M1	/* UART4_TXD    (IOMG119) */
+				>;
+			};
+
+			uart5_pmx_func: uart5-pins {
+				pinctrl-single,pins = <
+					0x1c8  MUX_M1	/* UART5_RXD    (IOMG114) */
+					0x1cc  MUX_M1	/* UART5_TXD    (IOMG115) */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0xe8   MUX_M0	/* I2C0_SCL     (IOMG058) */
+					0xec   MUX_M0	/* I2C0_SDA     (IOMG059) */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0xf0   MUX_M0	/* I2C1_SCL     (IOMG060) */
+					0xf4   MUX_M0	/* I2C1_SDA     (IOMG061) */
+				>;
+			};
+
+			i2c2_pmx_func: i2c2-pins {
+				pinctrl-single,pins = <
+					0xf8   MUX_M0	/* I2C2_SCL     (IOMG062) */
+					0xfc   MUX_M0	/* I2C2_SDA     (IOMG063) */
+				>;
+			};
+
+			spi0_pmx_func: spi0-pins {
+				pinctrl-single,pins = <
+					0x1a0  MUX_M1   /* SPI0_DI      (IOMG104) */
+					0x1a4  MUX_M1	/* SPI0_DO	(IOMG105) */
+					0x1a8  MUX_M1	/* SPI0_CS_N	(IOMG106) */
+					0x1ac  MUX_M1	/* SPI0_CLK	(IOMG107) */
+				>;
+			};
+		};
+
+		pmx1: pinmux@f7010800 {
+
+			pinctrl-names = "default";
+			pinctrl-0 = <
+				&boot_sel_cfg_func
+				&hkadc_ssi_cfg_func
+				&codec_clk_cfg_func
+				&pwm_in_cfg_func
+				&bl_pwm_cfg_func
+				>;
+
+			boot_sel_cfg_func: boot-sel-cfg-pins {
+				pinctrl-single,pins = <
+					0x0    0x0	/* BOOT_SEL     (IOCFG000) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			hkadc_ssi_cfg_func: hkadc-ssi-cfg-pins {
+				pinctrl-single,pins = <
+					0x6c   0x0	/* HKADC_SSI    (IOCFG027) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			emmc_clk_cfg_func: emmc-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x104  0x0	/* EMMC_CLK     (IOCFG065) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+
+			emmc_cfg_func: emmc-cfg-pins {
+				pinctrl-single,pins = <
+					0x108  0x0	/* EMMC_CMD     (IOCFG066) */
+					0x10c  0x0	/* EMMC_DATA0   (IOCFG067) */
+					0x110  0x0	/* EMMC_DATA1   (IOCFG068) */
+					0x114  0x0	/* EMMC_DATA2   (IOCFG069) */
+					0x118  0x0	/* EMMC_DATA3   (IOCFG070) */
+					0x11c  0x0	/* EMMC_DATA4   (IOCFG071) */
+					0x120  0x0	/* EMMC_DATA5   (IOCFG072) */
+					0x124  0x0	/* EMMC_DATA6   (IOCFG073) */
+					0x128  0x0	/* EMMC_DATA7   (IOCFG074) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+
+			emmc_rst_cfg_func: emmc-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x12c  0x0	/* EMMC_RST_N   (IOCFG075) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+
+			sd_clk_cfg_func: sd-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0xc    0x0	/* SD_CLK       (IOCFG003) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_10MA DRIVE_MASK>;
+			};
+			sd_clk_cfg_idle: sd-clk-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0xc    0x0	/* SD_CLK       (IOCFG003) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sd_cfg_func: sd-cfg-pins {
+				pinctrl-single,pins = <
+					0x10   0x0	/* SD_CMD       (IOCFG004) */
+					0x14   0x0	/* SD_DATA0     (IOCFG005) */
+					0x18   0x0	/* SD_DATA1     (IOCFG006) */
+					0x1c   0x0	/* SD_DATA2     (IOCFG007) */
+					0x20   0x0	/* SD_DATA3     (IOCFG008) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+			sd_cfg_idle: sd-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x10   0x0	/* SD_CMD       (IOCFG004) */
+					0x14   0x0	/* SD_DATA0     (IOCFG005) */
+					0x18   0x0	/* SD_DATA1     (IOCFG006) */
+					0x1c   0x0	/* SD_DATA2     (IOCFG007) */
+					0x20   0x0	/* SD_DATA3     (IOCFG008) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x134  0x0	/* SDIO_CLK     (IOCFG077) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+			sdio_clk_cfg_idle: sdio-clk-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x134  0x0	/* SDIO_CLK     (IOCFG077) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x138  0x0	/* SDIO_CMD     (IOCFG078) */
+					0x13c  0x0	/* SDIO_DATA0   (IOCFG079) */
+					0x140  0x0	/* SDIO_DATA1   (IOCFG080) */
+					0x144  0x0	/* SDIO_DATA2   (IOCFG081) */
+					0x148  0x0	/* SDIO_DATA3   (IOCFG082) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+			sdio_cfg_idle: sdio-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x138  0x0	/* SDIO_CMD     (IOCFG078) */
+					0x13c  0x0	/* SDIO_DATA0   (IOCFG079) */
+					0x140  0x0	/* SDIO_DATA1   (IOCFG080) */
+					0x144  0x0	/* SDIO_DATA2   (IOCFG081) */
+					0x148  0x0	/* SDIO_DATA3   (IOCFG082) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			isp_cfg_func1: isp-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x28   0x0	/* ISP_PWDN0    (IOCFG010) */
+					0x2c   0x0	/* ISP_PWDN1    (IOCFG011) */
+					0x30   0x0	/* ISP_PWDN2    (IOCFG012) */
+					0x34   0x0	/* ISP_SHUTTER0 (IOCFG013) */
+					0x38   0x0	/* ISP_SHUTTER1 (IOCFG014) */
+					0x3c   0x0	/* ISP_PWM      (IOCFG015) */
+					0x40   0x0	/* ISP_CCLK0    (IOCFG016) */
+					0x44   0x0	/* ISP_CCLK1    (IOCFG017) */
+					0x48   0x0	/* ISP_RESETB0  (IOCFG018) */
+					0x4c   0x0	/* ISP_RESETB1  (IOCFG019) */
+					0x50   0x0	/* ISP_STROBE0  (IOCFG020) */
+					0x58   0x0	/* ISP_SDA0     (IOCFG022) */
+					0x5c   0x0	/* ISP_SCL0     (IOCFG023) */
+					0x60   0x0	/* ISP_SDA1     (IOCFG024) */
+					0x64   0x0	/* ISP_SCL1     (IOCFG025) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+			isp_cfg_idle1: isp-cfg-idle1-pins {
+				pinctrl-single,pins = <
+					0x34   0x0	/* ISP_SHUTTER0 (IOCFG013) */
+					0x38   0x0	/* ISP_SHUTTER1 (IOCFG014) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			isp_cfg_func2: isp-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x54   0x0	/* ISP_STROBE1  (IOCFG021) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			codec_clk_cfg_func: codec-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x70   0x0	/* CODEC_CLK    (IOCFG028) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+			codec_clk_cfg_idle: codec-clk-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x70   0x0	/* CODEC_CLK    (IOCFG028) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			codec_cfg_func1: codec-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0x74   0x0	/* DMIC_CLK     (IOCFG029) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			codec_cfg_func2: codec-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0x78   0x0	/* CODEC_SYNC   (IOCFG030) */
+					0x7c   0x0	/* CODEC_DI     (IOCFG031) */
+					0x80   0x0	/* CODEC_DO     (IOCFG032) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+			codec_cfg_idle2: codec-cfg-idle2-pins {
+				pinctrl-single,pins = <
+					0x78   0x0	/* CODEC_SYNC   (IOCFG030) */
+					0x7c   0x0	/* CODEC_DI     (IOCFG031) */
+					0x80   0x0	/* CODEC_DO     (IOCFG032) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			fm_cfg_func: fm-cfg-pins {
+				pinctrl-single,pins = <
+					0x84   0x0	/* FM_XCLK      (IOCFG033) */
+					0x88   0x0	/* FM_XFS       (IOCFG034) */
+					0x8c   0x0	/* FM_DI        (IOCFG035) */
+					0x90   0x0	/* FM_DO        (IOCFG036) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			bt_cfg_func: bt-cfg-pins {
+				pinctrl-single,pins = <
+					0x94   0x0	/* BT_XCLK      (IOCFG037) */
+					0x98   0x0	/* BT_XFS       (IOCFG038) */
+					0x9c   0x0	/* BT_DI        (IOCFG039) */
+					0xa0   0x0	/* BT_DO        (IOCFG040) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+			bt_cfg_idle: bt-cfg-idle-pins {
+				pinctrl-single,pins = <
+					0x94   0x0	/* BT_XCLK      (IOCFG037) */
+					0x98   0x0	/* BT_XFS       (IOCFG038) */
+					0x9c   0x0	/* BT_DI        (IOCFG039) */
+					0xa0   0x0	/* BT_DO        (IOCFG040) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			pwm_in_cfg_func: pwm-in-cfg-pins {
+				pinctrl-single,pins = <
+					0xbc   0x0	/* PWM_IN       (IOCFG047) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			bl_pwm_cfg_func: bl-pwm-cfg-pins {
+				pinctrl-single,pins = <
+					0xc0   0x0	/* BL_PWM       (IOCFG048) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart0_cfg_func1: uart0-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0xc4   0x0	/* UART0_RXD    (IOCFG049) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart0_cfg_func2: uart0-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0xc8   0x0	/* UART0_TXD    (IOCFG050) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_04MA DRIVE_MASK>;
+			};
+
+			uart1_cfg_func1: uart1-cfg-func1-pins {
+				pinctrl-single,pins = <
+					0xcc   0x0	/* UART1_CTS_N  (IOCFG051) */
+					0xd4   0x0	/* UART1_RXD    (IOCFG053) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_UP   PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart1_cfg_func2: uart1-cfg-func2-pins {
+				pinctrl-single,pins = <
+					0xd0   0x0	/* UART1_RTS_N  (IOCFG052) */
+					0xd8   0x0	/* UART1_TXD    (IOCFG054) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0xdc   0x0	/* UART2_CTS_N  (IOCFG055) */
+					0xe0   0x0	/* UART2_RTS_N  (IOCFG056) */
+					0xe4   0x0	/* UART2_RXD    (IOCFG057) */
+					0xe8   0x0	/* UART2_TXD    (IOCFG058) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x190  0x0	/* UART3_CTS_N  (IOCFG100) */
+					0x194  0x0	/* UART3_RTS_N  (IOCFG101) */
+					0x198  0x0	/* UART3_RXD    (IOCFG102) */
+					0x19c  0x0	/* UART3_TXD    (IOCFG103) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x1e0  0x0	/* UART4_CTS_N  (IOCFG120) */
+					0x1e4  0x0	/* UART4_RTS_N  (IOCFG121) */
+					0x1e8  0x0	/* UART4_RXD    (IOCFG122) */
+					0x1ec  0x0	/* UART4_TXD    (IOCFG123) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			uart5_cfg_func: uart5-cfg-pins {
+				pinctrl-single,pins = <
+					0x1d8  0x0	/* UART4_RXD    (IOCFG118) */
+					0x1dc  0x0	/* UART4_TXD    (IOCFG119) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DOWN PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0xec   0x0	/* I2C0_SCL     (IOCFG059) */
+					0xf0   0x0	/* I2C0_SDA     (IOCFG060) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0xf4   0x0	/* I2C1_SCL     (IOCFG061) */
+					0xf8   0x0	/* I2C1_SDA     (IOCFG062) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			i2c2_cfg_func: i2c2-cfg-pins {
+				pinctrl-single,pins = <
+					0xfc   0x0	/* I2C2_SCL     (IOCFG063) */
+					0x100  0x0	/* I2C2_SDA     (IOCFG064) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			spi0_cfg_func: spi0-cfg-pins {
+				pinctrl-single,pins = <
+					0x1b0  0x0	/* SPI0_DI	(IOCFG108) */
+					0x1b4  0x0	/* SPI0_DO	(IOCFG109) */
+					0x1b8  0x0	/* SPI0_CS_N	(IOCFG110) */
+					0x1bc  0x0	/* SPI0_CLK	(IOCFG111) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+		};
+
+		pmx2: pinmux@f8001800 {
+
+			pinctrl-names = "default";
+			pinctrl-0 = <
+				&rstout_n_cfg_func
+				>;
+
+			rstout_n_cfg_func: rstout-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x0    0x0	/* RSTOUT_N     (IOCFG000) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			pmu_peri_en_cfg_func: pmu-peri-en-cfg-pins {
+				pinctrl-single,pins = <
+					0x4    0x0	/* PMU_PERI_EN  (IOCFG001) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			sysclk0_en_cfg_func: sysclk0-en-cfg-pins {
+				pinctrl-single,pins = <
+					0x8    0x0	/* SYSCLK0_EN   (IOCFG002) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+
+			jtag_tdo_cfg_func: jtag-tdo-cfg-pins {
+				pinctrl-single,pins = <
+					0xc    0x0	/* JTAG_TDO     (IOCFG003) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_08MA DRIVE_MASK>;
+			};
+
+			rf_reset_cfg_func: rf-reset-cfg-pins {
+				pinctrl-single,pins = <
+					0x70   0x0	/* RF_RESET0    (IOCFG028) */
+					0x74   0x0	/* RF_RESET1    (IOCFG029) */
+				>;
+				pinctrl-single,bias-pulldown  = <PULL_DIS  PULL_DOWN PULL_DIS  PULL_DOWN>;
+				pinctrl-single,bias-pullup    = <PULL_DIS  PULL_UP   PULL_DIS  PULL_UP>;
+				pinctrl-single,drive-strength = <DRIVE1_02MA DRIVE_MASK>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
new file mode 100644
index 000000000..b801a4804
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi
@@ -0,0 +1,1060 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * pinctrl dts fils for Hislicon HiKey960 development board
+ *
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		/* [IOMG_000, IOMG_123] */
+		range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
+
+		pmx0: pinmux@e896c000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xe896c000 0x0 0x1f0>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <
+				&range 0 7 0
+				&range 8 116 0>;
+
+			pmu_pmx_func: pmu-pins {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* PMU1_SSI */
+					0x00c MUX_M1 /* PMU2_SSI */
+					0x010 MUX_M1 /* PMU_CLKOUT */
+					0x100 MUX_M1 /* PMU_HKADC_SSI */
+				>;
+			};
+
+			csi0_pwd_n_pmx_func: csi0-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x044 MUX_M0 /* CSI0_PWD_N */
+				>;
+			};
+
+			csi1_pwd_n_pmx_func: csi1-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x04c MUX_M0 /* CSI1_PWD_N */
+				>;
+			};
+
+			isp0_pmx_func: isp0-pins {
+				pinctrl-single,pins = <
+					0x058 MUX_M1 /* ISP_CLK0 */
+					0x064 MUX_M1 /* ISP_SCL0 */
+					0x068 MUX_M1 /* ISP_SDA0 */
+				>;
+			};
+
+			isp1_pmx_func: isp1-pins {
+				pinctrl-single,pins = <
+					0x05c MUX_M1 /* ISP_CLK1 */
+					0x06c MUX_M1 /* ISP_SCL1 */
+					0x070 MUX_M1 /* ISP_SDA1 */
+				>;
+			};
+
+			pwr_key_pmx_func: pwr-key-pins {
+				pinctrl-single,pins = <
+					0x080 MUX_M0 /* GPIO_034 */
+				>;
+			};
+
+			i2c3_pmx_func: i2c3-pins {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* I2C3_SCL */
+					0x030 MUX_M1 /* I2C3_SDA */
+				>;
+			};
+
+			i2c4_pmx_func: i2c4-pins {
+				pinctrl-single,pins = <
+					0x090 MUX_M1 /* I2C4_SCL */
+					0x094 MUX_M1 /* I2C4_SDA */
+				>;
+			};
+
+			pcie_perstn_pmx_func: pcie-perstn-pins {
+				pinctrl-single,pins = <
+					0x15c MUX_M1 /* PCIE_PERST_N */
+				>;
+			};
+
+			usbhub5734_pmx_func: usbhub5734-pins {
+				pinctrl-single,pins = <
+					0x11c MUX_M0 /* GPIO_073 */
+					0x120 MUX_M0 /* GPIO_074 */
+				>;
+			};
+
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0x0cc MUX_M2 /* UART0_RXD */
+					0x0d0 MUX_M2 /* UART0_TXD */
+				>;
+			};
+
+			uart1_pmx_func: uart1-pins {
+				pinctrl-single,pins = <
+					0x0b0 MUX_M2 /* UART1_CTS_N */
+					0x0b4 MUX_M2 /* UART1_RTS_N */
+					0x0a8 MUX_M2 /* UART1_RXD */
+					0x0ac MUX_M2 /* UART1_TXD */
+				>;
+			};
+
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0x0bc MUX_M2 /* UART2_CTS_N */
+					0x0c0 MUX_M2 /* UART2_RTS_N */
+					0x0c8 MUX_M2 /* UART2_RXD */
+					0x0c4 MUX_M2 /* UART2_TXD */
+				>;
+			};
+
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x0dc MUX_M1 /* UART3_CTS_N */
+					0x0e0 MUX_M1 /* UART3_RTS_N */
+					0x0e4 MUX_M1 /* UART3_RXD */
+					0x0e8 MUX_M1 /* UART3_TXD */
+				>;
+			};
+
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x0ec MUX_M1 /* UART4_CTS_N */
+					0x0f0 MUX_M1 /* UART4_RTS_N */
+					0x0f4 MUX_M1 /* UART4_RXD */
+					0x0f8 MUX_M1 /* UART4_TXD */
+				>;
+			};
+
+			uart5_pmx_func: uart5-pins {
+				pinctrl-single,pins = <
+					0x0c4 MUX_M3 /* UART5_CTS_N */
+					0x0c8 MUX_M3 /* UART5_RTS_N */
+					0x0bc MUX_M3 /* UART5_RXD */
+					0x0c0 MUX_M3 /* UART5_TXD */
+				>;
+			};
+
+			uart6_pmx_func: uart6-pins {
+				pinctrl-single,pins = <
+					0x0cc MUX_M1 /* UART6_CTS_N */
+					0x0d0 MUX_M1 /* UART6_RTS_N */
+					0x0d4 MUX_M1 /* UART6_RXD */
+					0x0d8 MUX_M1 /* UART6_TXD */
+				>;
+			};
+
+			cam0_rst_pmx_func: cam0-rst-pins {
+				pinctrl-single,pins = <
+					0x0c8 MUX_M0 /* CAM0_RST */
+				>;
+			};
+
+			cam1_rst_pmx_func: cam1-rst-pins {
+				pinctrl-single,pins = <
+					0x124 MUX_M0 /* CAM1_RST */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC0_000, IOMG_MMC0_005] */
+		pmx1: pinmux@ff37e000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff37e000 0x0 0x18>;
+			#gpio-range-cells = <0x3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SD_CLK */
+					0x004 MUX_M1 /* SD_CMD */
+					0x008 MUX_M1 /* SD_DATA0 */
+					0x00c MUX_M1 /* SD_DATA1 */
+					0x010 MUX_M1 /* SD_DATA2 */
+					0x014 MUX_M1 /* SD_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_FIX_000, IOMG_FIX_011] */
+		pmx2: pinmux@ff3b6000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3b6000 0x0 0x30>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 12 0>;
+
+			ufs_pmx_func: ufs-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* UFS_REF_CLK */
+					0x004 MUX_M1 /* UFS_RST_N */
+				>;
+			};
+
+			spi3_pmx_func: spi3-pins {
+				pinctrl-single,pins = <
+					0x008 MUX_M1 /* SPI3_CLK */
+					0x00c MUX_M1 /* SPI3_DI */
+					0x010 MUX_M1 /* SPI3_DO */
+					0x014 MUX_M1 /* SPI3_CS0_N */
+				>;
+			};
+		};
+
+		/* [IOMG_MMC1_000, IOMG_MMC1_005] */
+		pmx3: pinmux@ff3fd000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff3fd000 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 6 0>;
+
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SDIO_CLK */
+					0x004 MUX_M1 /* SDIO_CMD */
+					0x008 MUX_M1 /* SDIO_DATA0 */
+					0x00c MUX_M1 /* SDIO_DATA1 */
+					0x010 MUX_M1 /* SDIO_DATA2 */
+					0x014 MUX_M1 /* SDIO_DATA3 */
+				>;
+			};
+		};
+
+		/* [IOMG_AO_000, IOMG_AO_041] */
+		pmx4: pinmux@fff11000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfff11000 0x0 0xa8>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base in node, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 42 0>;
+
+			i2s2_pmx_func: i2s2-pins {
+				pinctrl-single,pins = <
+					0x044 MUX_M1 /* I2S2_DI */
+					0x048 MUX_M1 /* I2S2_DO */
+					0x04c MUX_M1 /* I2S2_XCLK */
+					0x050 MUX_M1 /* I2S2_XFS */
+				>;
+			};
+
+			slimbus_pmx_func: slimbus-pins {
+				pinctrl-single,pins = <
+					0x02c MUX_M1 /* SLIMBUS_CLK */
+					0x030 MUX_M1 /* SLIMBUS_DATA */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0x014 MUX_M1 /* I2C0_SCL */
+					0x018 MUX_M1 /* I2C0_SDA */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0x01c MUX_M1 /* I2C1_SCL */
+					0x020 MUX_M1 /* I2C1_SDA */
+				>;
+			};
+
+			i2c7_pmx_func: i2c7-pins {
+				pinctrl-single,pins = <
+					0x024 MUX_M3 /* I2C7_SCL */
+					0x028 MUX_M3 /* I2C7_SDA */
+				>;
+			};
+
+			pcie_pmx_func: pcie-pins {
+				pinctrl-single,pins = <
+					0x084 MUX_M1 /* PCIE_CLKREQ_N */
+					0x088 MUX_M1 /* PCIE_WAKE_N */
+				>;
+			};
+
+			spi2_pmx_func: spi2-pins {
+				pinctrl-single,pins = <
+					0x08c MUX_M1 /* SPI2_CLK */
+					0x090 MUX_M1 /* SPI2_DI */
+					0x094 MUX_M1 /* SPI2_DO */
+					0x098 MUX_M1 /* SPI2_CS0_N */
+				>;
+			};
+
+			i2s0_pmx_func: i2s0-pins {
+				pinctrl-single,pins = <
+					0x034 MUX_M1 /* I2S0_DI */
+					0x038 MUX_M1 /* I2S0_DO */
+					0x03c MUX_M1 /* I2S0_XCLK */
+					0x040 MUX_M1 /* I2S0_XFS */
+				>;
+			};
+		};
+
+		pmx5: pinmux@e896c800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xe896c800 0x0 0x200>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			pmu_cfg_func: pmu-cfg-pins {
+				pinctrl-single,pins = <
+					0x010 0x0 /* PMU1_SSI */
+					0x014 0x0 /* PMU2_SSI */
+					0x018 0x0 /* PMU_CLKOUT */
+					0x10c 0x0 /* PMU_HKADC_SSI */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			i2c3_cfg_func: i2c3-cfg-pins {
+				pinctrl-single,pins = <
+					0x038 0x0 /* I2C3_SCL */
+					0x03c 0x0 /* I2C3_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			csi0_pwd_n_cfg_func: csi0-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x050 0x0 /* CSI0_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			csi1_pwd_n_cfg_func: csi1-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x058 0x0 /* CSI1_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp0_cfg_func: isp0-cfg-pins {
+				pinctrl-single,pins = <
+					0x064 0x0 /* ISP_CLK0 */
+					0x070 0x0 /* ISP_SCL0 */
+					0x074 0x0 /* ISP_SDA0 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK>;
+			};
+
+			isp1_cfg_func: isp1-cfg-pins {
+				pinctrl-single,pins = <
+					0x068 0x0 /* ISP_CLK1 */
+					0x078 0x0 /* ISP_SCL1 */
+					0x07c 0x0 /* ISP_SDA1 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			pwr_key_cfg_func: pwr-key-cfg-pins {
+				pinctrl-single,pins = <
+					0x08c 0x0 /* GPIO_034 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart1_cfg_func: uart1-cfg-pins {
+				pinctrl-single,pins = <
+					0x0b4 0x0 /* UART1_RXD */
+					0x0b8 0x0 /* UART1_TXD */
+					0x0bc 0x0 /* UART1_CTS_N */
+					0x0c0 0x0 /* UART1_RTS_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* UART2_CTS_N */
+					0x0cc 0x0 /* UART2_RTS_N */
+					0x0d0 0x0 /* UART2_TXD */
+					0x0d4 0x0 /* UART2_RXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart5_cfg_func: uart5-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* UART5_RXD */
+					0x0cc 0x0 /* UART5_TXD */
+					0x0d0 0x0 /* UART5_CTS_N */
+					0x0d4 0x0 /* UART5_RTS_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_rst_cfg_func: cam0-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x0d4 0x0 /* CAM0_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart0_cfg_func: uart0-cfg-pins {
+				pinctrl-single,pins = <
+					0x0d8 0x0 /* UART0_RXD */
+					0x0dc 0x0 /* UART0_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart6_cfg_func: uart6-cfg-pins {
+				pinctrl-single,pins = <
+					0x0d8 0x0 /* UART6_CTS_N */
+					0x0dc 0x0 /* UART6_RTS_N */
+					0x0e0 0x0 /* UART6_RXD */
+					0x0e4 0x0 /* UART6_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x0e8 0x0 /* UART3_CTS_N */
+					0x0ec 0x0 /* UART3_RTS_N */
+					0x0f0 0x0 /* UART3_RXD */
+					0x0f4 0x0 /* UART3_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x0f8 0x0 /* UART4_CTS_N */
+					0x0fc 0x0 /* UART4_RTS_N */
+					0x100 0x0 /* UART4_RXD */
+					0x104 0x0 /* UART4_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_rst_cfg_func: cam1-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x130 0x0 /* CAM1_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx6: pinmux@ff3b6800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3b6800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			ufs_cfg_func: ufs-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* UFS_REF_CLK */
+					0x004 0x0 /* UFS_RST_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_08MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_cfg_func: spi3-cfg-pins {
+				pinctrl-single,pins = <
+					0x008 0x0 /* SPI3_CLK */
+					0x00c 0x0 /* SPI3_DI */
+					0x010 0x0 /* SPI3_DO */
+					0x014 0x0 /* SPI3_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx7: pinmux@ff3fd800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff3fd800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SDIO_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA DRIVE6_MASK
+				>;
+			};
+
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SDIO_CMD */
+					0x008 0x0 /* SDIO_DATA0 */
+					0x00c 0x0 /* SDIO_DATA1 */
+					0x010 0x0 /* SDIO_DATA2 */
+					0x014 0x0 /* SDIO_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx8: pinmux@ff37e800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff37e800 0x0 0x18>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sd_clk_cfg_func: sd-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SD_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sd_cfg_func: sd-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SD_CMD */
+					0x008 0x0 /* SD_DATA0 */
+					0x00c 0x0 /* SD_DATA1 */
+					0x010 0x0 /* SD_DATA2 */
+					0x014 0x0 /* SD_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx9: pinmux@fff11800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfff11800 0x0 0xbc>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0x01c 0x0 /* I2C0_SCL */
+					0x020 0x0 /* I2C0_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0x024 0x0 /* I2C1_SCL */
+					0x028 0x0 /* I2C1_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c7_cfg_func: i2c7-cfg-pins {
+				pinctrl-single,pins = <
+					0x02c 0x0 /* I2C7_SCL */
+					0x030 0x0 /* I2C7_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			slimbus_cfg_func: slimbus-cfg-pins {
+				pinctrl-single,pins = <
+					0x034 0x0 /* SLIMBUS_CLK */
+					0x038 0x0 /* SLIMBUS_DATA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2s0_cfg_func: i2s0-cfg-pins {
+				pinctrl-single,pins = <
+					0x040 0x0 /* I2S0_DI */
+					0x044 0x0 /* I2S0_DO */
+					0x048 0x0 /* I2S0_XCLK */
+					0x04c 0x0 /* I2S0_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2s2_cfg_func: i2s2-cfg-pins {
+				pinctrl-single,pins = <
+					0x050 0x0 /* I2S2_DI */
+					0x054 0x0 /* I2S2_DO */
+					0x058 0x0 /* I2S2_XCLK */
+					0x05c 0x0 /* I2S2_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			pcie_cfg_func: pcie-cfg-pins {
+				pinctrl-single,pins = <
+					0x094 0x0 /* PCIE_CLKREQ_N */
+					0x098 0x0 /* PCIE_WAKE_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_cfg_func: spi2-cfg-pins {
+				pinctrl-single,pins = <
+					0x09c 0x0 /* SPI2_CLK */
+					0x0a0 0x0 /* SPI2_DI */
+					0x0a4 0x0 /* SPI2_DO */
+					0x0a8 0x0 /* SPI2_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			usb_cfg_func: usb-cfg-pins {
+				pinctrl-single,pins = <
+					0x0ac 0x0 /* GPIO_219 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
new file mode 100644
index 000000000..8f7bf80e6
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pinctrl.dtsi
@@ -0,0 +1,969 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon HiKey970 development board
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/ {
+	soc {
+		range: gpio-range {
+			#pinctrl-single,gpio-range-cells = <3>;
+		};
+
+		pmx0: pinmux@e896c000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xe896c000 0x0 0x72c>;
+			#pinctrl-cells = <1>;
+			#gpio-range-cells = <0x3>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 82 0>;
+
+			uart0_pmx_func: uart0-pins {
+				pinctrl-single,pins = <
+					0x054 MUX_M2 /* UART0_RXD */
+					0x058 MUX_M2 /* UART0_TXD */
+				>;
+			};
+
+			uart2_pmx_func: uart2-pins {
+				pinctrl-single,pins = <
+					0x700 MUX_M2 /* UART2_CTS_N */
+					0x704 MUX_M2 /* UART2_RTS_N */
+					0x708 MUX_M2 /* UART2_RXD */
+					0x70c MUX_M2 /* UART2_TXD */
+				>;
+			};
+
+			uart3_pmx_func: uart3-pins {
+				pinctrl-single,pins = <
+					0x064 MUX_M1 /* UART3_CTS_N */
+					0x068 MUX_M1 /* UART3_RTS_N */
+					0x06c MUX_M1 /* UART3_RXD */
+					0x070 MUX_M1 /* UART3_TXD */
+				>;
+			};
+
+			uart4_pmx_func: uart4-pins {
+				pinctrl-single,pins = <
+					0x074 MUX_M1 /* UART4_CTS_N */
+					0x078 MUX_M1 /* UART4_RTS_N */
+					0x07c MUX_M1 /* UART4_RXD */
+					0x080 MUX_M1 /* UART4_TXD */
+				>;
+			};
+
+			uart6_pmx_func: uart6-pins {
+				pinctrl-single,pins = <
+					0x05c MUX_M1 /* UART6_RXD */
+					0x060 MUX_M1 /* UART6_TXD */
+				>;
+			};
+
+			i2c3_pmx_func: i2c3-pins {
+				pinctrl-single,pins = <
+					0x010 MUX_M1 /* I2C3_SCL */
+					0x014 MUX_M1 /* I2C3_SDA */
+				>;
+			};
+
+			i2c4_pmx_func: i2c4-pins {
+				pinctrl-single,pins = <
+					0x03c MUX_M1 /* I2C4_SCL */
+					0x040 MUX_M1 /* I2C4_SDA */
+				>;
+			};
+
+			cam0_rst_pmx_func: cam0-rst-pins {
+				pinctrl-single,pins = <
+					0x714 MUX_M0 /* CAM0_RST */
+				>;
+			};
+
+			cam1_rst_pmx_func: cam1-rst-pins {
+				pinctrl-single,pins = <
+					0x048 MUX_M0 /* CAM1_RST */
+				>;
+			};
+
+			cam0_pwd_n_pmx_func: cam0-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x098 MUX_M0 /* CAM0_PWD_N */
+				>;
+			};
+
+			cam1_pwd_n_pmx_func: cam1-pwd-n-pins {
+				pinctrl-single,pins = <
+					0x044 MUX_M0 /* CAM1_PWD_N */
+				>;
+			};
+
+			isp0_pmx_func: isp0-pins {
+				pinctrl-single,pins = <
+					0x018 MUX_M1 /* ISP_CLK0 */
+					0x024 MUX_M1 /* ISP_SCL0 */
+					0x028 MUX_M1 /* ISP_SDA0 */
+				>;
+			};
+
+			isp1_pmx_func: isp1-pins {
+				pinctrl-single,pins = <
+					0x01c MUX_M1 /* ISP_CLK1 */
+					0x02c MUX_M1 /* ISP_SCL1 */
+					0x030 MUX_M1 /* ISP_SDA1 */
+				>;
+			};
+		};
+
+		pmx1: pinmux@fff11000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfff11000 0x0 0x73c>;
+			#gpio-range-cells = <0x3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 46 0>;
+
+			pwr_key_pmx_func: pwr-key-pins {
+				pinctrl-single,pins = <
+					0x064 MUX_M0 /* GPIO_203 */
+				>;
+			};
+
+			pd_pmx_func: pd-pins {
+				pinctrl-single,pins = <
+					0x080 MUX_M0 /* GPIO_221 */
+				>;
+			};
+
+			i2s2_pmx_func: i2s2-pins {
+			    pinctrl-single,pins = <
+					0x050 MUX_M1 /* I2S2_DI */
+					0x054 MUX_M1 /* I2S2_DO */
+					0x058 MUX_M1 /* I2S2_XCLK */
+					0x05c MUX_M1 /* I2S2_XFS */
+			    >;
+			};
+
+			spi0_pmx_func: spi0-pins {
+				pinctrl-single,pins = <
+					0x094 MUX_M1 /* SPI0_CLK */
+					0x098 MUX_M1 /* SPI0_DI */
+					0x09c MUX_M1 /* SPI0_DO */
+					0x0a0 MUX_M1 /* SPI0_CS0_N */
+				>;
+			};
+
+			spi2_pmx_func: spi2-pins {
+				pinctrl-single,pins = <
+					0x710 MUX_M1 /* SPI2_CLK */
+					0x714 MUX_M1 /* SPI2_DI */
+					0x718 MUX_M1 /* SPI2_DO */
+					0x71c MUX_M1 /* SPI2_CS0_N */
+				>;
+			};
+
+			spi3_pmx_func: spi3-pins {
+				pinctrl-single,pins = <
+					0x72c MUX_M1 /* SPI3_CLK */
+					0x730 MUX_M1 /* SPI3_DI */
+					0x734 MUX_M1 /* SPI3_DO */
+					0x738 MUX_M1 /* SPI3_CS0_N */
+				>;
+			};
+
+			i2c0_pmx_func: i2c0-pins {
+				pinctrl-single,pins = <
+					0x020 MUX_M1 /* I2C0_SCL */
+					0x024 MUX_M1 /* I2C0_SDA */
+				>;
+			};
+
+			i2c1_pmx_func: i2c1-pins {
+				pinctrl-single,pins = <
+					0x028 MUX_M1 /* I2C1_SCL */
+					0x02c MUX_M1 /* I2C1_SDA */
+				>;
+			};
+			i2c2_pmx_func: i2c2-pins {
+				pinctrl-single,pins = <
+					0x030 MUX_M1 /* I2C2_SCL */
+					0x034 MUX_M1 /* I2C2_SDA */
+				>;
+			};
+
+			pcie_clkreq_pmx_func: pcie-clkreq-pins {
+				pinctrl-single,pins = <
+					0x084 MUX_M1 /* PCIE0_CLKREQ_N */
+				>;
+			};
+
+			gpio185_pmx_func: gpio185-pins {
+				pinctrl-single,pins = <0x01C    0x1>;
+			};
+
+			gpio185_pmx_idle: gpio185-idle-pins {
+				pinctrl-single,pins = <0x01C    0x0>;
+			};
+		};
+
+		pmx2: pinmux@e896c800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xe896c800 0x0 0x72c>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			uart0_cfg_func: uart0-cfg-pins {
+				pinctrl-single,pins = <
+					0x058 0x0 /* UART0_RXD */
+					0x05c 0x0 /* UART0_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart2_cfg_func: uart2-cfg-pins {
+				pinctrl-single,pins = <
+					0x700 0x0 /* UART2_CTS_N */
+					0x704 0x0 /* UART2_RTS_N */
+					0x708 0x0 /* UART2_RXD */
+					0x70c 0x0 /* UART2_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart3_cfg_func: uart3-cfg-pins {
+				pinctrl-single,pins = <
+					0x068 0x0 /* UART3_CTS_N */
+					0x06c 0x0 /* UART3_RTS_N */
+					0x070 0x0 /* UART3_RXD */
+					0x074 0x0 /* UART3_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart4_cfg_func: uart4-cfg-pins {
+				pinctrl-single,pins = <
+					0x078 0x0 /* UART4_CTS_N */
+					0x07c 0x0 /* UART4_RTS_N */
+					0x080 0x0 /* UART4_RXD */
+					0x084 0x0 /* UART4_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			uart6_cfg_func: uart6-cfg-pins {
+				pinctrl-single,pins = <
+					0x060 0x0 /* UART6_RXD */
+					0x064 0x0 /* UART6_TXD */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			i2c3_cfg_func: i2c3-cfg-pins {
+				pinctrl-single,pins = <
+					0x014 0x0 /* I2C3_SCL */
+					0x018 0x0 /* I2C3_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			i2c4_cfg_func: i2c4-cfg-pins {
+				pinctrl-single,pins = <
+					0x040 0x0 /* I2C4_SCL */
+					0x044 0x0 /* I2C4_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_rst_cfg_func: cam0-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x714 0x0 /* CAM0_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_rst_cfg_func: cam1-rst-cfg-pins {
+				pinctrl-single,pins = <
+					0x04C 0x0 /* CAM1_RST */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam0_pwd_n_cfg_func: cam0-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x09C 0x0 /* CAM0_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			cam1_pwd_n_cfg_func: cam1-pwd-n-cfg-pins {
+				pinctrl-single,pins = <
+					0x048 0x0 /* CAM1_PWD_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp0_cfg_func: isp0-cfg-pins {
+				pinctrl-single,pins = <
+					0x01C 0x0 /* ISP_CLK0 */
+					0x028 0x0 /* ISP_SCL0 */
+					0x02C 0x0 /* ISP_SDA0 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			isp1_cfg_func: isp1-cfg-pins {
+				pinctrl-single,pins = <
+					0x020 0x0 /* ISP_CLK1 */
+					0x030 0x0 /* ISP_SCL1 */
+					0x034 0x0 /* ISP_SDA1 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx5: pinmux@fc182000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xfc182000 0x0 0x028>;
+			#gpio-range-cells = <3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <0x7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 10 0>;
+
+			sdio_pmx_func: sdio-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SDIO_CLK */
+					0x004 MUX_M1 /* SDIO_CMD */
+					0x008 MUX_M1 /* SDIO_DATA0 */
+					0x00c MUX_M1 /* SDIO_DATA1 */
+					0x010 MUX_M1 /* SDIO_DATA2 */
+					0x014 MUX_M1 /* SDIO_DATA3 */
+				>;
+			};
+		};
+
+		pmx6: pinmux@fc182800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfc182800 0x0 0x028>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sdio_clk_cfg_func: sdio-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SDIO_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA DRIVE6_MASK
+				>;
+			};
+
+			sdio_cfg_func: sdio-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SDIO_CMD */
+					0x008 0x0 /* SDIO_DATA0 */
+					0x00c 0x0 /* SDIO_DATA1 */
+					0x010 0x0 /* SDIO_DATA2 */
+					0x014 0x0 /* SDIO_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx7: pinmux@ff37e000 {
+			compatible = "pinctrl-single";
+			reg = <0x0 0xff37e000 0x0 0x030>;
+			#gpio-range-cells = <3>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+			pinctrl-single,function-mask = <7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 12 0>;
+
+			sd_pmx_func: sd-pins {
+				pinctrl-single,pins = <
+					0x000 MUX_M1 /* SD_CLK */
+					0x004 MUX_M1 /* SD_CMD */
+					0x008 MUX_M1 /* SD_DATA0 */
+					0x00c MUX_M1 /* SD_DATA1 */
+					0x010 MUX_M1 /* SD_DATA2 */
+					0x014 MUX_M1 /* SD_DATA3 */
+				>;
+			};
+		};
+
+		pmx8: pinmux@ff37e800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xff37e800 0x0 0x030>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			sd_clk_cfg_func: sd-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x000 0x0 /* SD_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_32MA
+					DRIVE6_MASK
+				>;
+			};
+
+			sd_cfg_func: sd-cfg-pins {
+				pinctrl-single,pins = <
+					0x004 0x0 /* SD_CMD */
+					0x008 0x0 /* SD_DATA0 */
+					0x00c 0x0 /* SD_DATA1 */
+					0x010 0x0 /* SD_DATA2 */
+					0x014 0x0 /* SD_DATA3 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE6_19MA
+					DRIVE6_MASK
+				>;
+			};
+		};
+
+		pmx16: pinmux@fff11800 {
+			compatible = "pinconf-single";
+			reg = <0x0 0xfff11800 0x0 0x73c>;
+			#pinctrl-cells = <1>;
+			pinctrl-single,register-width = <0x20>;
+
+			pwr_key_cfg_func: pwr-key-cfg-pins {
+				pinctrl-single,pins = <
+					0x090 0x0 /* GPIO_203 */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			usb_cfg_func: usb-cfg-pins {
+				pinctrl-single,pins = <
+					0x0AC 0x0 /* GPIO_221 */
+				>;
+				pinctrl-single,bias-pulldown  = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup    = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			spi0_cfg_func: spi0-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c8 0x0 /* SPI0_DI */
+					0x0cc 0x0 /* SPI0_DO */
+					0x0d0 0x0 /* SPI0_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_cfg_func: spi2-cfg-pins {
+				pinctrl-single,pins = <
+					0x714 0x0 /* SPI2_DI */
+					0x718 0x0 /* SPI2_DO */
+					0x71c 0x0 /* SPI2_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_cfg_func: spi3-cfg-pins {
+				pinctrl-single,pins = <
+					0x730 0x0 /* SPI3_DI */
+					0x734 0x0 /* SPI3_DO */
+					0x738 0x0 /* SPI3_CS0_N */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+
+			spi0_clk_cfg_func: spi0-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x0c4 0x0 /* SPI0_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_10MA DRIVE6_MASK
+				>;
+			};
+
+			spi2_clk_cfg_func: spi2-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x710 0x0 /* SPI2_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_10MA DRIVE6_MASK
+				>;
+			};
+
+			spi3_clk_cfg_func: spi3-clk-cfg-pins {
+				pinctrl-single,pins = <
+					0x72c 0x0 /* SPI3_CLK */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_10MA DRIVE6_MASK
+				>;
+			};
+
+			i2c0_cfg_func: i2c0-cfg-pins {
+				pinctrl-single,pins = <
+					0x04c 0x0 /* I2C0_SCL */
+					0x050 0x0 /* I2C0_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			i2c1_cfg_func: i2c1-cfg-pins {
+				pinctrl-single,pins = <
+					0x054 0x0 /* I2C1_SCL */
+					0x058 0x0 /* I2C1_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			i2c2_cfg_func: i2c2-cfg-pins {
+				pinctrl-single,pins = <
+					0x05c 0x0 /* I2C2_SCL */
+					0x060 0x0 /* I2C2_SDA */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_04MA DRIVE6_MASK
+				>;
+			};
+
+			pcie_clkreq_cfg_func: pcie-clkreq-cfg-pins {
+				pinctrl-single,pins = <
+					0x0b0 0x0
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_DIS
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_06MA DRIVE6_MASK
+				>;
+			};
+			i2s2_cfg_func: i2s2-cfg-pins {
+				pinctrl-single,pins = <
+					0x07c 0x0 /* I2S2_DI */
+					0x080 0x0 /* I2S2_DO */
+					0x084 0x0 /* I2S2_XCLK */
+					0x088 0x0 /* I2S2_XFS */
+				>;
+				pinctrl-single,bias-pulldown = <
+					PULL_DIS
+					PULL_DOWN
+					PULL_DIS
+					PULL_DOWN
+				>;
+				pinctrl-single,bias-pullup = <
+					PULL_UP
+					PULL_UP
+					PULL_DIS
+					PULL_UP
+				>;
+				pinctrl-single,drive-strength = <
+					DRIVE7_02MA DRIVE6_MASK
+				>;
+			};
+
+			gpio185_cfg_func: gpio185-cfg-pins {
+				pinctrl-single,pins = <0x048  0>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x00 0x70>;
+				pinctrl-single,slew-rate = <0x0 0x80>;
+			};
+
+			gpio185_cfg_idle: gpio185-cfg-idle-pins {
+				pinctrl-single,pins = <0x048  0>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x00 0x70>;
+				pinctrl-single,slew-rate = <0x0 0x80>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000..c06e011a6
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	spmi: spmi@fff24000 {
+		compatible = "hisilicon,kirin970-spmi-controller";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		status = "okay";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
+		hisilicon,spmi-channel = <2>;
+
+		pmic: pmic@0 {
+			compatible = "hisilicon,hi6421-spmi";
+			reg = <0 SPMI_USID>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpios = <&gpio28 0 0>;
+
+			regulators {
+				ldo3: ldo3 { /* HDMI */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-boot-on;
+				};
+
+				ldo4: ldo4 { /* 40 PIN */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1725000>;
+					regulator-max-microvolt = <1900000>;
+					regulator-boot-on;
+				};
+
+				ldo9: ldo9 { /* SDCARD I/O */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1750000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo15: ldo15 { /* UFS */
+					regulator-name = "ldo15";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo16: ldo16 { /* SD */
+					regulator-name = "ldo16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldo17: ldo17 { /* USB HUB */
+					regulator-name = "ldo17";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo33: ldo33 { /* PEX8606 */
+					regulator-name = "ldo33";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo34: ldo34 { /* GPS AUX IN VDD */
+					regulator-name = "ldo34";
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <3300000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
new file mode 100644
index 000000000..c4eaebbb4
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 HiSilicon Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hip05.dtsi"
+
+/ {
+	model = "Hisilicon Hip05 D02 Development Board";
+	compatible = "hisilicon,hip05-d02";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pwr-button {
+			label = "Power Button";
+			gpios = <&porta 8 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			debounce-interval = <0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&peri_gpio0 {
+	status = "okay";
+};
+
+&lbc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x0 0x90000000 0x08000000>,
+		 <1 0 0x0 0x98000000 0x08000000>;
+
+	nor-flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "numonyx,js28f00a", "cfi-flash";
+		reg = <0 0x0 0x08000000>;
+		bank-width = <2>;
+		/* The three parts may not used */
+		partition@0 {
+			label = "BIOS";
+			reg = <0x0 0x300000>;
+		};
+		partition@300000 {
+			label = "Linux";
+			reg = <0x300000 0xa00000>;
+		};
+		partition@1000000 {
+			label = "Rootfs";
+			reg = <0x01000000 0x02000000>;
+		};
+	};
+
+	cpld@1,0 {
+		compatible = "hisilicon,hip05-cpld";
+		reg = <1 0x0 0x100>;
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
new file mode 100644
index 000000000..65ddc0698
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip05-d02";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@20001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@20002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu@20003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu@20101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu@20102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu@20103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu@20200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu@20201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu@20202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu@20203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu@20300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu@20301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu@20302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu@20303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x20303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@8d000000 {
+		compatible = "arm,gic-v3";
+                #interrupt-cells = <3>;
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges;
+                interrupt-controller;
+                #redistributor-regions = <1>;
+                redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x8d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x8d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_peri: msi-controller@8c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x8c000000 0x0 0x40000>;
+		};
+
+		its_m3: msi-controller@a3000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xa3000000 0x0 0x40000>;
+		};
+
+		its_pcie: msi-controller@b7000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xb7000000 0x0 0x40000>;
+		};
+
+		its_dsa: msi-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk200mhz: refclk200mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart0: serial@80300000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x80300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&refclk200mhz>, <&refclk200mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@80310000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x80310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&refclk200mhz>, <&refclk200mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		lbc: local-bus@80380000 {
+			compatible = "hisilicon,hisi-localbus", "simple-bus";
+			reg = <0x0 0x80380000 0x0 0x10000>;
+			status = "disabled";
+		};
+
+		peri_gpio0: gpio@802e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802e0000 0x0 0x10000>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		peri_gpio1: gpio@802f0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802f0000 0x0 0x10000>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
new file mode 100644
index 000000000..35af5d382
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+/dts-v1/;
+
+#include "hip06.dtsi"
+
+/ {
+	model = "Hisilicon Hip06 D03 Development Board";
+	compatible = "hisilicon,hip06-d03";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+	};
+
+	chosen { };
+};
+
+&ipmi0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth2 {
+	status = "okay";
+};
+
+&eth3 {
+	status = "okay";
+};
+
+&sas1 {
+	status = "okay";
+};
+
+&usb_ohci {
+	status = "okay";
+};
+
+&usb_ehci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
new file mode 100644
index 000000000..f46c33d10
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D03 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip06-d03";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu@10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu@10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu@10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu@10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu@10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu@10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu@10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu@10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu@10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu@10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x4d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_dsa: msi-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	mbigen_pcie@a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&its_dsa 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&its_dsa 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&its_dsa 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_pcie0: intc_pcie0 {
+			msi-parent = <&its_dsa 0x40085>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <10>;
+		};
+	};
+
+	mbigen_dsa@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&its_dsa 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&its_dsa 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+	};
+
+	/**
+	 *  HiSilicon erratum 161010801: This describes the limitation
+	 *  of HiSilicon platforms hip06/hip07 to support the SMMUv3
+	 *  mappings for PCIe MSI transactions.
+	 *  PCIe controller on these platforms has to differentiate the
+	 *  MSI payload against other DMA payload and has to modify the
+	 *  MSI payload. This makes it difficult for these platforms to
+	 *  have a SMMU translation for MSI. In order to workaround this,
+	 *  ARM SMMUv3 driver requires a quirk to treat the MSI regions
+	 *  separately. Such a quirk is currently missing for DT based
+	 *  systems. Hence please make sure that the smmu pcie node on
+	 *  hip06 is disabled as this will break the PCIe functionality
+	 *  when iommu-map entry is used along with the PCIe node.
+	 *  Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html
+	 */
+	smmu0: iommu@a0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xa0040000 0x0 0x20000>;
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		isa@a01b0000 {
+			compatible = "hisilicon,hip06-lpc";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+			ipmi0: bt@e4 {
+				compatible = "ipmi-bt";
+				device_type = "ipmi";
+				reg = <0x01 0xe4 0x04>;
+				status = "disabled";
+			};
+
+			uart0: serial@2f8 {
+				compatible = "ns16550a";
+				clock-frequency = <1843200>;
+				reg = <0x01 0x2f8 0x08>;
+				status = "disabled";
+			};
+		};
+
+		refclk: refclk {
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			#clock-cells = <0>;
+		};
+
+		usb_ohci: usb@a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <640 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: usb@a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <641 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000>,
+			      <0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet-4 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet-5 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet-0 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet-1 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <75 4>,<76 4>,<77 4>,<78 4>,<79 4>,
+				     <80 4>,<81 4>,<82 4>,<83 4>,<84 4>,
+				     <85 4>,<86 4>,<87 4>,<88 4>,<89 4>,
+				     <90 4>,<91 4>,<92 4>,<93 4>,<94 4>,
+				     <95 4>,<96 4>,<97 4>,<98 4>,<99 4>,
+				     <100 4>,<101 4>,<102 4>,<103 4>,<104 4>,
+				     <105 4>,<106 4>,<107 4>,<108 4>,<109 4>,
+				     <110 4>,<111 4>,<112 4>,<113 4>,<114 4>,
+				     <115 4>,<116 4>,<117 4>,<118 4>,<119 4>,
+				     <120 4>,<121 4>,<122 4>,<123 4>,<124 4>,
+				     <125 4>,<126 4>,<127 4>,<128 4>,<129 4>,
+				     <130 4>,<131 4>,<132 4>,<133 4>,<134 4>,
+				     <135 4>,<136 4>,<137 4>,<138 4>,<139 4>,
+				     <140 4>,<141 4>,<142 4>,<143 4>,<144 4>,
+				     <145 4>,<146 4>,<147 4>,<148 4>,<149 4>,
+				     <150 4>,<151 4>,<152 4>,<153 4>,<154 4>,
+				     <155 4>,<156 4>,<157 4>,<158 4>,<159 4>,
+				     <160 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			hip06-sas-v2-quirk-amt;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip06-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			clocks = <&refclk 0>;
+			queue-count = <16>;
+			phy-count = <9>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
+			status = "disabled";
+		};
+
+		pcie0: pcie@a0090000 {
+			compatible = "hisilicon,hip06-pcie-ecam";
+			reg = <0 0xb0000000 0 0x2000000>,
+			      <0 0xa0090000 0 0x10000>;
+			bus-range = <0  31>;
+			msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
+			msi-map-mask = <0xffff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000>,
+				 <0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
+					0x0 0 0 2 &mbigen_pcie0 650 4
+					0x0 0 0 3 &mbigen_pcie0 650 4
+					0x0 0 0 4 &mbigen_pcie0 650 4>;
+			status = "disabled";
+		};
+
+	};
+
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
new file mode 100644
index 000000000..c3df67845
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+/dts-v1/;
+
+#include "hip07.dtsi"
+
+/ {
+	model = "Hisilicon Hip07 D05 Development Board";
+	compatible = "hisilicon,hip07-d05";
+
+	/* the mem node will be updated by UEFI. */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x40000000>;
+		numa-node-id = <0>;
+	};
+
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0 10>,
+				  <0 1 15>,
+				  <0 2 20>,
+				  <0 3 25>,
+				  <1 0 15>,
+				  <1 1 10>,
+				  <1 2 25>,
+				  <1 3 30>,
+				  <2 0 20>,
+				  <2 1 25>,
+				  <2 2 10>,
+				  <2 3 15>,
+				  <3 0 25>,
+				  <3 1 30>,
+				  <3 2 15>,
+				  <3 3 10>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ipmi0 {
+	status = "okay";
+};
+
+&usb_ohci {
+	status = "okay";
+};
+
+&usb_ehci {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&eth2 {
+	status = "okay";
+};
+
+&eth3 {
+	status = "okay";
+};
+
+&sas1 {
+	status = "okay";
+};
+
+&p0_pcie2_a {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
new file mode 100644
index 000000000..81d907ef4
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
@@ -0,0 +1,1914 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * dts file for Hisilicon D05 Development Board
+ *
+ * Copyright (C) 2016 HiSilicon Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip07-d05";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu16>;
+				};
+				core1 {
+					cpu = <&cpu17>;
+				};
+				core2 {
+					cpu = <&cpu18>;
+				};
+				core3 {
+					cpu = <&cpu19>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu20>;
+				};
+				core1 {
+					cpu = <&cpu21>;
+				};
+				core2 {
+					cpu = <&cpu22>;
+				};
+				core3 {
+					cpu = <&cpu23>;
+				};
+			};
+
+			cluster6 {
+				core0 {
+					cpu = <&cpu24>;
+				};
+				core1 {
+					cpu = <&cpu25>;
+				};
+				core2 {
+					cpu = <&cpu26>;
+				};
+				core3 {
+					cpu = <&cpu27>;
+				};
+			};
+
+			cluster7 {
+				core0 {
+					cpu = <&cpu28>;
+				};
+				core1 {
+					cpu = <&cpu29>;
+				};
+				core2 {
+					cpu = <&cpu30>;
+				};
+				core3 {
+					cpu = <&cpu31>;
+				};
+			};
+
+			cluster8 {
+				core0 {
+					cpu = <&cpu32>;
+				};
+				core1 {
+					cpu = <&cpu33>;
+				};
+				core2 {
+					cpu = <&cpu34>;
+				};
+				core3 {
+					cpu = <&cpu35>;
+				};
+			};
+
+			cluster9 {
+				core0 {
+					cpu = <&cpu36>;
+				};
+				core1 {
+					cpu = <&cpu37>;
+				};
+				core2 {
+					cpu = <&cpu38>;
+				};
+				core3 {
+					cpu = <&cpu39>;
+				};
+			};
+
+			cluster10 {
+				core0 {
+					cpu = <&cpu40>;
+				};
+				core1 {
+					cpu = <&cpu41>;
+				};
+				core2 {
+					cpu = <&cpu42>;
+				};
+				core3 {
+					cpu = <&cpu43>;
+				};
+			};
+
+			cluster11 {
+				core0 {
+					cpu = <&cpu44>;
+				};
+				core1 {
+					cpu = <&cpu45>;
+				};
+				core2 {
+					cpu = <&cpu46>;
+				};
+				core3 {
+					cpu = <&cpu47>;
+				};
+			};
+
+			cluster12 {
+				core0 {
+					cpu = <&cpu48>;
+				};
+				core1 {
+					cpu = <&cpu49>;
+				};
+				core2 {
+					cpu = <&cpu50>;
+				};
+				core3 {
+					cpu = <&cpu51>;
+				};
+			};
+
+			cluster13 {
+				core0 {
+					cpu = <&cpu52>;
+				};
+				core1 {
+					cpu = <&cpu53>;
+				};
+				core2 {
+					cpu = <&cpu54>;
+				};
+				core3 {
+					cpu = <&cpu55>;
+				};
+			};
+
+			cluster14 {
+				core0 {
+					cpu = <&cpu56>;
+				};
+				core1 {
+					cpu = <&cpu57>;
+				};
+				core2 {
+					cpu = <&cpu58>;
+				};
+				core3 {
+					cpu = <&cpu59>;
+				};
+			};
+
+			cluster15 {
+				core0 {
+					cpu = <&cpu60>;
+				};
+				core1 {
+					cpu = <&cpu61>;
+				};
+				core2 {
+					cpu = <&cpu62>;
+				};
+				core3 {
+					cpu = <&cpu63>;
+				};
+			};
+		};
+
+		cpu0: cpu@10000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu1: cpu@10001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu2: cpu@10002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu3: cpu@10003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu4: cpu@10100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu5: cpu@10101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu6: cpu@10102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu7: cpu@10103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu8: cpu@10200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu9: cpu@10201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu10: cpu@10202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu11: cpu@10203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu12: cpu@10300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu13: cpu@10301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu14: cpu@10302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu15: cpu@10303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x10303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+			numa-node-id = <0>;
+		};
+
+		cpu16: cpu@30000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu17: cpu@30001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu18: cpu@30002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu19: cpu@30003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster4_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu20: cpu@30100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu21: cpu@30101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu22: cpu@30102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu23: cpu@30103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster5_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu24: cpu@30200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu25: cpu@30201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu26: cpu@30202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu27: cpu@30203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster6_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu28: cpu@30300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu29: cpu@30301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu30: cpu@30302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu31: cpu@30303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x30303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster7_l2>;
+			numa-node-id = <1>;
+		};
+
+		cpu32: cpu@50000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu33: cpu@50001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu34: cpu@50002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu35: cpu@50003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster8_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu36: cpu@50100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu37: cpu@50101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu38: cpu@50102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu39: cpu@50103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster9_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu40: cpu@50200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu41: cpu@50201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu42: cpu@50202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu43: cpu@50203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster10_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu44: cpu@50300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu45: cpu@50301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu46: cpu@50302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu47: cpu@50303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x50303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster11_l2>;
+			numa-node-id = <2>;
+		};
+
+		cpu48: cpu@70000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu49: cpu@70001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu50: cpu@70002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu51: cpu@70003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster12_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu52: cpu@70100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu53: cpu@70101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu54: cpu@70102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu55: cpu@70103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster13_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu56: cpu@70200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu57: cpu@70201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu58: cpu@70202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu59: cpu@70203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster14_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu60: cpu@70300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu61: cpu@70301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu62: cpu@70302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cpu63: cpu@70303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x70303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster15_l2>;
+			numa-node-id = <3>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster4_l2: l2-cache4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster5_l2: l2-cache5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster6_l2: l2-cache6 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster7_l2: l2-cache7 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster8_l2: l2-cache8 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster9_l2: l2-cache9 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster10_l2: l2-cache10 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster11_l2: l2-cache11 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster12_l2: l2-cache12 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster13_l2: l2-cache13 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster14_l2: l2-cache14 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		cluster15_l2: l2-cache15 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	gic: interrupt-controller@4d000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <4>;
+		redistributor-stride = <0x0 0x40000>;
+		reg = <0x0 0x4d000000 0x0 0x10000>,	/* GICD */
+		      <0x0 0x4d100000 0x0 0x400000>,	/* p0 GICR node 0 */
+		      <0x0 0x6d100000 0x0 0x400000>,	/* p0 GICR node 1 */
+		      <0x400 0x4d100000 0x0 0x400000>,	/* p1 GICR node 2 */
+		      <0x400 0x6d100000 0x0 0x400000>,	/* p1 GICR node 3 */
+		      <0x0 0xfe000000 0x0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0x0 0x10000>,	/* GICH */
+		      <0x0 0xfe020000 0x0 0x10000>;	/* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		p0_its_peri_a: msi-controller@4c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x4c000000 0x0 0x40000>;
+		};
+
+		p0_its_peri_b: msi-controller@6c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0x6c000000 0x0 0x40000>;
+		};
+
+		p0_its_dsa_a: msi-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+
+		p0_its_dsa_b: msi-controller@8c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x8 0xc6000000 0x0 0x40000>;
+		};
+
+		p1_its_peri_a: msi-controller@4004c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0x4c000000 0x0 0x40000>;
+		};
+
+		p1_its_peri_b: msi-controller@4006c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0x6c000000 0x0 0x40000>;
+		};
+
+		p1_its_dsa_a: msi-controller@400c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x400 0xc6000000 0x0 0x40000>;
+		};
+
+		p1_its_dsa_b: msi-controller@408c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x408 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	p0_mbigen_peri_b: interrupt-controller@60080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0x60080000 0x0 0x10000>;
+
+		mbigen_uart: uart_intc {
+			msi-parent = <&p0_its_peri_b 0x120c7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <1>;
+		};
+	};
+
+	p0_mbigen_pcie_a: interrupt-controller@a0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+
+		mbigen_pcie2_a: intc_pcie2_a {
+			msi-parent = <&p0_its_dsa_a 0x40087>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <10>;
+		};
+
+		mbigen_sas1: intc_sas1 {
+			msi-parent = <&p0_its_dsa_a 0x40000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_sas2: intc_sas2 {
+			msi-parent = <&p0_its_dsa_a 0x40040>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_smmu_pcie: intc_smmu_pcie {
+			msi-parent = <&p0_its_dsa_a 0x40b0c>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+
+		mbigen_usb: intc_usb {
+			msi-parent = <&p0_its_dsa_a 0x40080>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <2>;
+		};
+	};
+	p0_mbigen_alg_a:interrupt-controller@d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xd0080000 0x0 0x10000>;
+
+		p0_mbigen_sec_a: intc_sec {
+			msi-parent = <&p0_its_dsa_a 0x40400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p0_mbigen_smmu_alg_a: intc_smmu_alg {
+			msi-parent = <&p0_its_dsa_a 0x40b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p0_mbigen_alg_b:interrupt-controller@8,d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x8 0xd0080000 0x0 0x10000>;
+
+		p0_mbigen_sec_b: intc_sec {
+			msi-parent = <&p0_its_dsa_b 0x42400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p0_mbigen_smmu_alg_b: intc_smmu_alg {
+			msi-parent = <&p0_its_dsa_b 0x42b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p1_mbigen_alg_a:interrupt-controller@400,d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x400 0xd0080000 0x0 0x10000>;
+
+		p1_mbigen_sec_a: intc_sec {
+			msi-parent = <&p1_its_dsa_a 0x44400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p1_mbigen_smmu_alg_a: intc_smmu_alg {
+			msi-parent = <&p1_its_dsa_a 0x44b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p1_mbigen_alg_b:interrupt-controller@408,d0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x408 0xd0080000 0x0 0x10000>;
+
+		p1_mbigen_sec_b: intc_sec {
+			msi-parent = <&p1_its_dsa_b 0x46400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <33>;
+		};
+		p1_mbigen_smmu_alg_b: intc_smmu_alg {
+			msi-parent = <&p1_its_dsa_b 0x46b1b>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+	p0_mbigen_dsa_a: interrupt-controller@c0080000 {
+		compatible = "hisilicon,mbigen-v2";
+		reg = <0x0 0xc0080000 0x0 0x10000>;
+
+		mbigen_dsaf0: intc_dsaf0 {
+			msi-parent = <&p0_its_dsa_a 0x40800>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <409>;
+		};
+
+		mbigen_dsa_roce: intc-roce {
+			msi-parent = <&p0_its_dsa_a 0x40B1E>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <34>;
+		};
+
+		mbigen_sas0: intc-sas0 {
+			msi-parent = <&p0_its_dsa_a 0x40900>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <128>;
+		};
+
+		mbigen_smmu_dsa: intc_smmu_dsa {
+			msi-parent = <&p0_its_dsa_a 0x40b20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			num-pins = <3>;
+		};
+	};
+
+	/**
+	 *  HiSilicon erratum 161010801: This describes the limitation
+	 *  of HiSilicon platforms hip06/hip07 to support the SMMUv3
+	 *  mappings for PCIe MSI transactions.
+	 *  PCIe controller on these platforms has to differentiate the
+	 *  MSI payload against other DMA payload and has to modify the
+	 *  MSI payload. This makes it difficult for these platforms to
+	 *  have a SMMU translation for MSI. In order to workaround this,
+	 *  ARM SMMUv3 driver requires a quirk to treat the MSI regions
+	 *  separately. Such a quirk is currently missing for DT based
+	 *  systems. Hence please make sure that the smmu pcie node on
+	 *  hip07 is disabled as this will break the PCIe functionality
+	 *  when iommu-map entry is used along with the PCIe node.
+	 *  Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html
+	 */
+	smmu0: iommu@a0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xa0040000 0x0 0x20000>;
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+		status = "disabled";
+	};
+	p0_smmu_alg_a: iommu@d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p0_mbigen_smmu_alg_a>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+	p0_smmu_alg_b: iommu@8d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x8 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p0_mbigen_smmu_alg_b>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+	p1_smmu_alg_a: iommu@400d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x400 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p1_mbigen_smmu_alg_a>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+	p1_smmu_alg_b: iommu@408d0040000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x408 0xd0040000 0x0 0x20000>;
+		interrupt-parent = <&p1_mbigen_smmu_alg_b>;
+		interrupts = <733 1>,
+		<734 1>,
+		<735 1>;
+		interrupt-names = "eventq", "gerror", "priq";
+		#iommu-cells = <1>;
+		dma-coherent;
+		hisilicon,broken-prefetch-cmd;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		isa@a01b0000 {
+			compatible = "hisilicon,hip07-lpc";
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+			ipmi0: bt@e4 {
+				compatible = "ipmi-bt";
+				device_type = "ipmi";
+				reg = <0x01 0xe4 0x04>;
+				status = "disabled";
+			};
+		};
+
+		uart0: serial@602b0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x602b0000 0x0 0x1000>;
+			interrupt-parent = <&mbigen_uart>;
+			interrupts = <807 4>;
+			current-speed = <115200>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		usb_ohci: usb@a7030000 {
+			compatible = "generic-ohci";
+			reg = <0x0 0xa7030000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <640 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb_ehci: usb@a7020000 {
+			compatible = "generic-ehci";
+			reg = <0x0 0xa7020000 0x0 0x10000>;
+			interrupt-parent = <&mbigen_usb>;
+			interrupts = <641 4>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		peri_c_subctrl: sub_ctrl_c@60000000 {
+			compatible = "hisilicon,peri-subctrl","syscon";
+			reg = <0 0x60000000 0x0 0x10000>;
+		};
+
+		dsa_subctrl: dsa_subctrl@c0000000 {
+			compatible = "hisilicon,dsa-subctrl", "syscon";
+			reg = <0x0 0xc0000000 0x0 0x10000>;
+		};
+
+		dsa_cpld: dsa_cpld@78000010 {
+			compatible = "syscon";
+			reg = <0x0 0x78000010 0x0 0x100>;
+			reg-io-width = <2>;
+		};
+
+		pcie_subctl: pcie_subctl@a0000000 {
+			compatible = "hisilicon,pcie-sas-subctrl", "syscon";
+			reg = <0x0 0xa0000000 0x0 0x10000>;
+		};
+
+		serdes_ctrl: sds_ctrl@c2200000 {
+			compatible = "syscon";
+			reg = <0 0xc2200000 0x0 0x80000>;
+		};
+
+		mdio@603c0000 {
+			compatible = "hisilicon,hns-mdio";
+			reg = <0x0 0x603c0000 0x0 0x1000>;
+			subctrl-vbase = <&peri_c_subctrl 0x338 0xa38
+					 0x531c 0x5a1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+			};
+		};
+
+		dsaf0: dsa@c7000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "hisilicon,hns-dsaf-v2";
+			mode = "6port-16rss";
+			reg = <0x0 0xc5000000 0x0 0x890000>,
+			      <0x0 0xc7000000 0x0 0x600000>;
+			reg-names = "ppe-base", "dsaf-base";
+			interrupt-parent = <&mbigen_dsaf0>;
+			subctrl-syscon = <&dsa_subctrl>;
+			reset-field-offset = <0>;
+			interrupts =
+			<576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
+			<581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
+			<586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
+			<591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
+			<596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
+			<960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
+			<965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
+			<970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
+			<975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
+			<980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
+			<985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
+			<990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
+			<995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
+			<1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
+			<1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
+			<1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
+			<1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
+			<1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
+			<1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
+			<1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
+			<1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
+			<1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
+			<1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
+			<1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
+			<1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
+			<1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
+			<1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
+			<1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
+			<1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
+			<1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
+			<1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
+			<1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
+			<1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
+			<1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
+			<1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
+			<1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
+			<1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
+			<1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
+			<1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
+			<1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
+			<1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
+			<1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
+			<1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
+			<1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
+			<1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
+			<1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
+			<1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
+			<1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
+			<1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
+			<1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
+			<1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
+			<1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
+			<1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
+			<1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
+			<1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
+			<1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
+			<1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
+			<1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
+			<1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
+			<1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
+			<1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
+			<1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
+			<1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
+			<1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
+			<1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
+			<1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
+			<1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
+			<1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
+			<1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
+			<1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
+			<1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
+			<1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
+			<1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
+			<1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
+			<1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
+			<1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
+			<1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
+			<1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
+			<1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
+			<1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
+			<1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
+			<1340 1>, <1341 1>, <1342 1>, <1343 1>;
+
+			desc-num = <0x400>;
+			buf-size = <0x1000>;
+			dma-coherent;
+
+			port@0 {
+				reg = <0>;
+				serdes-syscon = <&serdes_ctrl>;
+				cpld-syscon = <&dsa_cpld 0x0>;
+				port-rst-offset = <0>;
+				port-mode-offset = <0>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "fiber";
+			};
+
+			port@1 {
+				reg = <1>;
+				serdes-syscon = <&serdes_ctrl>;
+				cpld-syscon = <&dsa_cpld 0x4>;
+				port-rst-offset = <1>;
+				port-mode-offset = <1>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "fiber";
+			};
+
+			port@4 {
+				reg = <4>;
+				phy-handle = <&phy0>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <4>;
+				port-mode-offset = <2>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "copper";
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-handle = <&phy1>;
+				serdes-syscon = <&serdes_ctrl>;
+				port-rst-offset = <5>;
+				port-mode-offset = <3>;
+				mc-mac-mask = [ff f0 00 00 00 00];
+				media-type = "copper";
+			};
+		};
+
+		eth0: ethernet@4 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <4>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth1: ethernet@5 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <5>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth2: ethernet@0 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <0>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		eth3: ethernet@1 {
+			compatible = "hisilicon,hns-nic-v2";
+			ae-handle = <&dsaf0>;
+			port-idx-in-ae = <1>;
+			local-mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+			dma-coherent;
+		};
+
+		infiniband@c4000000 {
+			compatible = "hisilicon,hns-roce-v1";
+			reg = <0x0 0xc4000000 0x0 0x100000>;
+			dma-coherent;
+			eth-handle = <&eth2 &eth3 0 0 &eth0 &eth1>;
+			dsaf-handle = <&dsaf0>;
+			node-guid = [00 9A CD 00 00 01 02 03];
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-parent = <&mbigen_dsa_roce>;
+			interrupts = <722 1>,
+				     <723 1>,
+				     <724 1>,
+				     <725 1>,
+				     <726 1>,
+				     <727 1>,
+				     <728 1>,
+				     <729 1>,
+				     <730 1>,
+				     <731 1>,
+				     <732 1>,
+				     <733 1>,
+				     <734 1>,
+				     <735 1>,
+				     <736 1>,
+				     <737 1>,
+				     <738 1>,
+				     <739 1>,
+				     <740 1>,
+				     <741 1>,
+				     <742 1>,
+				     <743 1>,
+				     <744 1>,
+				     <745 1>,
+				     <746 1>,
+				     <747 1>,
+				     <748 1>,
+				     <749 1>,
+				     <750 1>,
+				     <751 1>,
+				     <752 1>,
+				     <753 1>,
+				     <785 1>,
+				     <754 4>;
+
+			interrupt-names = "hns-roce-comp-0",
+					  "hns-roce-comp-1",
+					  "hns-roce-comp-2",
+					  "hns-roce-comp-3",
+					  "hns-roce-comp-4",
+					  "hns-roce-comp-5",
+					  "hns-roce-comp-6",
+					  "hns-roce-comp-7",
+					  "hns-roce-comp-8",
+					  "hns-roce-comp-9",
+					  "hns-roce-comp-10",
+					  "hns-roce-comp-11",
+					  "hns-roce-comp-12",
+					  "hns-roce-comp-13",
+					  "hns-roce-comp-14",
+					  "hns-roce-comp-15",
+					  "hns-roce-comp-16",
+					  "hns-roce-comp-17",
+					  "hns-roce-comp-18",
+					  "hns-roce-comp-19",
+					  "hns-roce-comp-20",
+					  "hns-roce-comp-21",
+					  "hns-roce-comp-22",
+					  "hns-roce-comp-23",
+					  "hns-roce-comp-24",
+					  "hns-roce-comp-25",
+					  "hns-roce-comp-26",
+					  "hns-roce-comp-27",
+					  "hns-roce-comp-28",
+					  "hns-roce-comp-29",
+					  "hns-roce-comp-30",
+					  "hns-roce-comp-31",
+					  "hns-roce-async",
+					  "hns-roce-common";
+		};
+
+		sas0: sas@c3000000 {
+			compatible = "hisilicon,hip07-sas-v2";
+			reg = <0 0xc3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&dsa_subctrl>;
+			ctrl-reset-reg = <0xa60>;
+			ctrl-reset-sts-reg = <0x5a30>;
+			ctrl-clock-ena-reg = <0x338>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas0>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>,<608 1>,<609 1>,
+				     <610 1>,<611 1>,<612 1>,<613 1>,<614 1>,
+				     <615 1>,<616 1>,<617 1>,<618 1>,<619 1>,
+				     <620 1>,<621 1>,<622 1>,<623 1>,<624 1>,
+				     <625 1>,<626 1>,<627 1>,<628 1>,<629 1>,
+				     <630 1>,<631 1>,<632 1>;
+			status = "disabled";
+		};
+
+		sas1: sas@a2000000 {
+			compatible = "hisilicon,hip07-sas-v2";
+			reg = <0 0xa2000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			hip06-sas-v2-quirk-amt;
+			ctrl-reset-reg = <0xa18>;
+			ctrl-reset-sts-reg = <0x5a0c>;
+			ctrl-clock-ena-reg = <0x318>;
+			queue-count = <16>;
+			phy-count = <8>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas1>;
+			interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>,
+				     <69 4>,<70 4>,<71 4>,<72 4>,<73 4>,
+				     <74 4>,<75 4>,<76 4>,<77 4>,<78 4>,
+				     <79 4>,<80 4>,<81 4>,<82 4>,<83 4>,
+				     <84 4>,<85 4>,<86 4>,<87 4>,<88 4>,
+				     <89 4>,<90 4>,<91 4>,<92 4>,<93 4>,
+				     <94 4>,<95 4>,<96 4>,<97 4>,<98 4>,
+				     <99 4>,<100 4>,<101 4>,<102 4>,<103 4>,
+				     <104 4>,<105 4>,<106 4>,<107 4>,<108 4>,
+				     <109 4>,<110 4>,<111 4>,<112 4>,<113 4>,
+				     <114 4>,<115 4>,<116 4>,<117 4>,<118 4>,
+				     <119 4>,<120 4>,<121 4>,<122 4>,<123 4>,
+				     <124 4>,<125 4>,<126 4>,<127 4>,<128 4>,
+				     <129 4>,<130 4>,<131 4>,<132 4>,<133 4>,
+				     <134 4>,<135 4>,<136 4>,<137 4>,<138 4>,
+				     <139 4>,<140 4>,<141 4>,<142 4>,<143 4>,
+				     <144 4>,<145 4>,<146 4>,<147 4>,<148 4>,
+				     <149 4>,<150 4>,<151 4>,<152 4>,<153 4>,
+				     <154 4>,<155 4>,<156 4>,<157 4>,<158 4>,
+				     <159 4>,<576 1>,<577 1>,<578 1>,<579 1>,
+				     <580 1>,<581 1>,<582 1>,<583 1>,<584 1>,
+				     <585 1>,<586 1>,<587 1>,<588 1>,<589 1>,
+				     <590 1>,<591 1>,<592 1>,<593 1>,<594 1>,
+				     <595 1>,<596 1>,<597 1>,<598 1>,<599 1>,
+				     <600 1>,<601 1>,<602 1>,<603 1>,<604 1>,
+				     <605 1>,<606 1>,<607 1>;
+			status = "disabled";
+		};
+
+		sas2: sas@a3000000 {
+			compatible = "hisilicon,hip07-sas-v2";
+			reg = <0 0xa3000000 0 0x10000>;
+			sas-addr = [50 01 88 20 16 00 00 00];
+			hisilicon,sas-syscon = <&pcie_subctl>;
+			ctrl-reset-reg = <0xae0>;
+			ctrl-reset-sts-reg = <0x5a70>;
+			ctrl-clock-ena-reg = <0x3a8>;
+			queue-count = <16>;
+			phy-count = <9>;
+			dma-coherent;
+			interrupt-parent = <&mbigen_sas2>;
+			interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>,
+				     <197 4>,<198 4>,<199 4>,<200 4>,<201 4>,
+				     <202 4>,<203 4>,<204 4>,<205 4>,<206 4>,
+				     <207 4>,<208 4>,<209 4>,<210 4>,<211 4>,
+				     <212 4>,<213 4>,<214 4>,<215 4>,<216 4>,
+				     <217 4>,<218 4>,<219 4>,<220 4>,<221 4>,
+				     <222 4>,<223 4>,<224 4>,<225 4>,<226 4>,
+				     <227 4>,<228 4>,<229 4>,<230 4>,<231 4>,
+				     <232 4>,<233 4>,<234 4>,<235 4>,<236 4>,
+				     <237 4>,<238 4>,<239 4>,<240 4>,<241 4>,
+				     <242 4>,<243 4>,<244 4>,<245 4>,<246 4>,
+				     <247 4>,<248 4>,<249 4>,<250 4>,<251 4>,
+				     <252 4>,<253 4>,<254 4>,<255 4>,<256 4>,
+				     <257 4>,<258 4>,<259 4>,<260 4>,<261 4>,
+				     <262 4>,<263 4>,<264 4>,<265 4>,<266 4>,
+				     <267 4>,<268 4>,<269 4>,<270 4>,<271 4>,
+				     <272 4>,<273 4>,<274 4>,<275 4>,<276 4>,
+				     <277 4>,<278 4>,<279 4>,<280 4>,<281 4>,
+				     <282 4>,<283 4>,<284 4>,<285 4>,<286 4>,
+				     <287 4>,<608 1>,<609 1>,<610 1>,<611 1>,
+				     <612 1>,<613 1>,<614 1>,<615 1>,<616 1>,
+				     <617 1>,<618 1>,<619 1>,<620 1>,<621 1>,
+				     <622 1>,<623 1>,<624 1>,<625 1>,<626 1>,
+				     <627 1>,<628 1>,<629 1>,<630 1>,<631 1>,
+				     <632 1>,<633 1>,<634 1>,<635 1>,<636 1>,
+				     <637 1>,<638 1>,<639 1>;
+			status = "disabled";
+		};
+
+		p0_pcie2_a: pcie@a00a0000 {
+			compatible = "hisilicon,hip07-pcie-ecam";
+			reg = <0 0xaf800000 0 0x800000>,
+			      <0 0xa00a0000 0 0x10000>;
+			bus-range = <0xf8 0xff>;
+			msi-map = <0xf800 &p0_its_dsa_a 0xf800 0x800>;
+			msi-map-mask = <0xffff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			dma-coherent;
+			ranges = <0x02000000 0 0xa8000000 0 0xa8000000 0 0x77f0000>,
+				 <0x01000000 0 0 0 0xaf7f0000 0 0x10000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map = <0x0 0 0 1 &mbigen_pcie2_a 671 4
+					 0x0 0 0 2 &mbigen_pcie2_a 671 4
+					 0x0 0 0 3 &mbigen_pcie2_a 671 4
+					 0x0 0 0 4 &mbigen_pcie2_a 671 4>;
+			status = "disabled";
+		};
+		p0_sec_a: crypto@d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x0 0xd0000000 0x0 0x10000>,
+			      <0x0 0xd2000000 0x0 0x10000>,
+			      <0x0 0xd2010000 0x0 0x10000>,
+			      <0x0 0xd2020000 0x0 0x10000>,
+			      <0x0 0xd2030000 0x0 0x10000>,
+			      <0x0 0xd2040000 0x0 0x10000>,
+			      <0x0 0xd2050000 0x0 0x10000>,
+			      <0x0 0xd2060000 0x0 0x10000>,
+			      <0x0 0xd2070000 0x0 0x10000>,
+			      <0x0 0xd2080000 0x0 0x10000>,
+			      <0x0 0xd2090000 0x0 0x10000>,
+			      <0x0 0xd20a0000 0x0 0x10000>,
+			      <0x0 0xd20b0000 0x0 0x10000>,
+			      <0x0 0xd20c0000 0x0 0x10000>,
+			      <0x0 0xd20d0000 0x0 0x10000>,
+			      <0x0 0xd20e0000 0x0 0x10000>,
+			      <0x0 0xd20f0000 0x0 0x10000>,
+			      <0x0 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p0_mbigen_sec_a>;
+			iommus = <&p0_smmu_alg_a 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+		p0_sec_b: crypto@8,d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x8 0xd0000000 0x0 0x10000>,
+			      <0x8 0xd2000000 0x0 0x10000>,
+			      <0x8 0xd2010000 0x0 0x10000>,
+			      <0x8 0xd2020000 0x0 0x10000>,
+			      <0x8 0xd2030000 0x0 0x10000>,
+			      <0x8 0xd2040000 0x0 0x10000>,
+			      <0x8 0xd2050000 0x0 0x10000>,
+			      <0x8 0xd2060000 0x0 0x10000>,
+			      <0x8 0xd2070000 0x0 0x10000>,
+			      <0x8 0xd2080000 0x0 0x10000>,
+			      <0x8 0xd2090000 0x0 0x10000>,
+			      <0x8 0xd20a0000 0x0 0x10000>,
+			      <0x8 0xd20b0000 0x0 0x10000>,
+			      <0x8 0xd20c0000 0x0 0x10000>,
+			      <0x8 0xd20d0000 0x0 0x10000>,
+			      <0x8 0xd20e0000 0x0 0x10000>,
+			      <0x8 0xd20f0000 0x0 0x10000>,
+			      <0x8 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p0_mbigen_sec_b>;
+			iommus = <&p0_smmu_alg_b 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+		p1_sec_a: crypto@400,d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x400 0xd0000000 0x0 0x10000>,
+			      <0x400 0xd2000000 0x0 0x10000>,
+			      <0x400 0xd2010000 0x0 0x10000>,
+			      <0x400 0xd2020000 0x0 0x10000>,
+			      <0x400 0xd2030000 0x0 0x10000>,
+			      <0x400 0xd2040000 0x0 0x10000>,
+			      <0x400 0xd2050000 0x0 0x10000>,
+			      <0x400 0xd2060000 0x0 0x10000>,
+			      <0x400 0xd2070000 0x0 0x10000>,
+			      <0x400 0xd2080000 0x0 0x10000>,
+			      <0x400 0xd2090000 0x0 0x10000>,
+			      <0x400 0xd20a0000 0x0 0x10000>,
+			      <0x400 0xd20b0000 0x0 0x10000>,
+			      <0x400 0xd20c0000 0x0 0x10000>,
+			      <0x400 0xd20d0000 0x0 0x10000>,
+			      <0x400 0xd20e0000 0x0 0x10000>,
+			      <0x400 0xd20f0000 0x0 0x10000>,
+			      <0x400 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p1_mbigen_sec_a>;
+			iommus = <&p1_smmu_alg_a 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+		p1_sec_b: crypto@408,d2000000 {
+			compatible = "hisilicon,hip07-sec";
+			reg = <0x408 0xd0000000 0x0 0x10000>,
+			      <0x408 0xd2000000 0x0 0x10000>,
+			      <0x408 0xd2010000 0x0 0x10000>,
+			      <0x408 0xd2020000 0x0 0x10000>,
+			      <0x408 0xd2030000 0x0 0x10000>,
+			      <0x408 0xd2040000 0x0 0x10000>,
+			      <0x408 0xd2050000 0x0 0x10000>,
+			      <0x408 0xd2060000 0x0 0x10000>,
+			      <0x408 0xd2070000 0x0 0x10000>,
+			      <0x408 0xd2080000 0x0 0x10000>,
+			      <0x408 0xd2090000 0x0 0x10000>,
+			      <0x408 0xd20a0000 0x0 0x10000>,
+			      <0x408 0xd20b0000 0x0 0x10000>,
+			      <0x408 0xd20c0000 0x0 0x10000>,
+			      <0x408 0xd20d0000 0x0 0x10000>,
+			      <0x408 0xd20e0000 0x0 0x10000>,
+			      <0x408 0xd20f0000 0x0 0x10000>,
+			      <0x408 0xd2100000 0x0 0x10000>;
+			interrupt-parent = <&p1_mbigen_sec_b>;
+			iommus = <&p1_smmu_alg_b 0x600>;
+			dma-coherent;
+			interrupts = <576 4>,
+				     <577 1>, <578 4>,
+				     <579 1>, <580 4>,
+				     <581 1>, <582 4>,
+				     <583 1>, <584 4>,
+				     <585 1>, <586 4>,
+				     <587 1>, <588 4>,
+				     <589 1>, <590 4>,
+				     <591 1>, <592 4>,
+				     <593 1>, <594 4>,
+				     <595 1>, <596 4>,
+				     <597 1>, <598 4>,
+				     <599 1>, <600 4>,
+				     <601 1>, <602 4>,
+				     <603 1>, <604 4>,
+				     <605 1>, <606 4>,
+				     <607 1>, <608 4>;
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
new file mode 100644
index 000000000..7bb19e4b0
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl dts file for HiSilicon Poplar board
+ *
+ * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/hisi.h>
+
+/* value, enable bits, disable bits, mask */
+#define PINCTRL_PULLDOWN(value, enable, disable, mask) \
+	(value << 13) (enable << 13) (disable << 13) (mask << 13)
+#define PINCTRL_PULLUP(value, enable, disable, mask) \
+	(value << 12) (enable << 12) (disable << 12) (mask << 12)
+#define PINCTRL_SLEW_RATE(value, mask)	  (value << 8) (mask << 8)
+#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4)
+
+&pmx0 {
+	emmc_pins_1: emmc-pins-1 {
+		pinctrl-single,pins = <
+			0x000 MUX_M2
+			0x004 MUX_M2
+			0x008 MUX_M2
+			0x00c MUX_M2
+			0x010 MUX_M2
+			0x014 MUX_M2
+			0x018 MUX_M2
+			0x01c MUX_M2
+			0x024 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0xb, 0xf)
+		>;
+	};
+
+	emmc_pins_2: emmc-pins-2 {
+		pinctrl-single,pins = <
+			0x028 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(0x9, 0xf)
+		>;
+	};
+
+	emmc_pins_3: emmc-pins-3 {
+		pinctrl-single,pins = <
+			0x02c MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(0, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+
+	emmc_pins_4: emmc-pins-4 {
+		pinctrl-single,pins = <
+			0x030 MUX_M2
+		>;
+		pinctrl-single,bias-pulldown = <
+			PINCTRL_PULLDOWN(1, 1, 0, 1)
+		>;
+		pinctrl-single,bias-pullup = <
+			PINCTRL_PULLUP(0, 1, 0, 1)
+		>;
+		pinctrl-single,slew-rate = <
+			PINCTRL_SLEW_RATE(1, 1)
+		>;
+		pinctrl-single,drive-strength = <
+			PINCTRL_DRV_STRENGTH(3, 3)
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
new file mode 100644
index 000000000..d39cfb723
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
+				socfpga_agilex_socdk.dtb \
+				socfpga_agilex_socdk_nand.dtb \
+				socfpga_agilex5_socdk.dtb \
+				socfpga_n5x_socdk.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 000000000..466c85363
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+
+/ {
+	model = "Keem Bay EVM";
+	compatible = "intel,keembay-evm", "intel,keembay";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2GB of DDR memory. */
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 000000000..781761d29
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@20500000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x20500000 0x0 0x20000>,	/* GICD */
+		      <0x0 0x20580000 0x0 0x80000>;	/* GICR */
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Secure, non-secure, virtual, and hypervisor */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@20150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20150000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@20160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20160000 0x0 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@20170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20170000 0x0 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@20180000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20180000 0x0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
new file mode 100644
index 000000000..d3adb6a13
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -0,0 +1,675 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/agilex-clock.h>
+
+/ {
+	compatible = "intel,socfpga-agilex";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x0 0x0 0x2000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+		interrupt-parent = <&intc>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x0 0x1000>,
+		      <0x0 0xfffc2000 0x0 0x2000>,
+		      <0x0 0xfffc4000 0x0 0x2000>,
+		      <0x0 0xfffc6000 0x0 0x2000>;
+	};
+
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	usbphy0: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+
+		base_fpga_region {
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			compatible = "fpga-region";
+			fpga-mgr = <&fpga_mgr>;
+		};
+
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,agilex-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 1>;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			clocks = <&clkmgr AGILEX_EMAC0_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 2>;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			clocks = <&clkmgr AGILEX_EMAC1_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <256>;
+			iommus = <&smmu 3>;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			clocks = <&clkmgr AGILEX_EMAC2_CLK>, <&clkmgr AGILEX_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			resets = <&rst GPIO0_RESET>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		mmc: mmc@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+			resets = <&rst SDMMC_RESET>;
+			reset-names = "reset";
+			clocks = <&clkmgr AGILEX_L4_MP_CLK>,
+				 <&clkmgr AGILEX_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
+			iommus = <&smmu 5>;
+			altr,sysmgr-syscon = <&sysmgr 0x28 4>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@ffb90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-denali-nand";
+			reg = <0xffb90000 0x10000>,
+			      <0xffb80000 0x1000>;
+			reg-names = "nand_data", "denali_reg";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX_NAND_CLK>,
+				 <&clkmgr AGILEX_NAND_X_CLK>,
+				 <&clkmgr AGILEX_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xffe00000 0x40000>;
+		};
+
+		pdma: dma-controller@ffda0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xffda0000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
+			reset-names = "dma", "dma-ocp";
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
+		};
+
+		pinctrl0: pinctrl@ffd13000 {
+			compatible = "pinctrl-single";
+			#pinctrl-cells = <1>;
+			reg = <0xffd13000 0xa0>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x0000000f>;
+		};
+
+		pinctrl1: pinconf@ffd13100 {
+			compatible = "pinctrl-single";
+			#pinctrl-cells = <1>;
+			reg = <0xffd13100 0x20>;
+			pinctrl-single,register-width = <32>;
+		};
+
+		rst: rstmgr@ffd11000 {
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
+			reg = <0xffd11000 0x100>;
+			#reset-cells = <1>;
+		};
+
+		smmu: iommu@fa000000 {
+			compatible = "arm,mmu-500", "arm,smmu-v2";
+			reg = <0xfa000000 0x40000>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* Global Secure Fault */
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				/* Global Non-secure Fault */
+				<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				/* Non-secure Context Interrupts (32) */
+				<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7ff0>;
+			clocks = <&clkmgr AGILEX_MPU_CCU_CLK>,
+				 <&clkmgr AGILEX_L3_MAIN_FREE_CLK>,
+				 <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0xffd12000 0x500>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+		};
+
+		uart1: serial@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX_USB_CLK>;
+			clock-names = "otg";
+			iommus = <&smmu 6>;
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			iommus = <&smmu 7>;
+			clocks = <&clkmgr AGILEX_USB_CLK>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		sdr: sdr@f8011100 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xf8011100 0xc0>;
+		};
+
+		eccmgr {
+			compatible = "altr,socfpga-s10-ecc-manager",
+				     "altr,socfpga-a10-ecc-manager";
+			altr,sysmgr-syscon = <&sysmgr>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			sdramedac {
+				compatible = "altr,sdram-edac-s10";
+				altr,sdr-syscon = <&sdr>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ocram-ecc@ff8cc000 {
+				compatible = "altr,socfpga-s10-ocram-ecc",
+					     "altr,socfpga-a10-ocram-ecc";
+				reg = <0xff8cc000 0x100>;
+				altr,ecc-parent = <&ocram>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c4000 {
+				compatible = "altr,socfpga-s10-usb-ecc",
+					     "altr,socfpga-usb-ecc";
+				reg = <0xff8c4000 0x100>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-rx-ecc@ff8c0000 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0000 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0400 {
+				compatible = "altr,socfpga-s10-eth-mac-ecc",
+					     "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0400 0x100>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdmmca-ecc@ff8c8c00 {
+				compatible = "altr,socfpga-s10-sdmmc-ecc",
+					     "altr,socfpga-sdmmc-ecc";
+				reg = <0xff8c8c00 0x100>;
+				altr,ecc-parent = <&mmc>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+					     <15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
+
+		firmware {
+			svc {
+				compatible = "intel,agilex-svc";
+				method = "smc";
+				memory-region = <&service_reserved>;
+
+				fpga_mgr: fpga-mgr {
+					compatible = "intel,agilex-soc-fpga-mgr";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
new file mode 100644
index 000000000..dcdaf7064
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Intel Corporation
+ */
+
+/dts-v1/;
+#include <dt-bindings/reset/altr,rst-mgr-s10.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/intel,agilex5-clkmgr.h>
+
+/ {
+	compatible = "intel,socfpga-agilex5";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		service_reserved: svcbuffer@0 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x2000000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a76";
+			reg = <0x200>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a76";
+			reg = <0x300>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: interrupt-controller@1d000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x1d000000 0 0x10000>,
+			<0x0 0x1d060000 0 0x100000>;
+		ranges;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells =<2>;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		redistributor-stride = <0x0 0x20000>;
+
+		its: msi-controller@1d040000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0x1d040000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	/* Clock tree 5 main sources*/
+	clocks {
+		cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cb_intosc_ls_clk: cb-intosc-ls-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		f2s_free_clk: f2s-free-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc1: osc1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		qspi_clk: qspi-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	usbphy0: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+
+		clkmgr: clock-controller@10d10000 {
+			compatible = "intel,agilex5-clkmgr";
+			reg = <0x10d10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c0: i2c@10c02800 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02800 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10c02900 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02900 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10c02a00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02a00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10c02b00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02b00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@10c02c00 {
+			compatible = "snps,designware-i2c";
+			reg = <0x10c02c00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			status = "disabled";
+		};
+
+		i3c0: i3c-master@10da0000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			reg = <0x10da0000 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
+			status = "disabled";
+		};
+
+		i3c1: i3c-master@10da1000 {
+			compatible = "snps,dw-i3c-master-1.00a";
+			reg = <0x10da1000 0x1000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_MP_CLK>;
+			status = "disabled";
+		};
+
+		gpio1: gpio@10c03300 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x10c03300 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&rst GPIO1_RESET>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		nand: nand-controller@10b80000 {
+			compatible = "cdns,hp-nfc";
+			reg = <0x10b80000 0x10000>,
+					<0x10840000 0x10000>;
+			reg-names = "reg", "sdma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_NAND_NF_CLK>;
+			cdns,board-delay-ps = <4830>;
+			status = "disabled";
+		};
+
+		ocram: sram@0 {
+			compatible = "mmio-sram";
+			reg = <0x00000000 0x80000>;
+			ranges = <0 0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		dmac0: dma-controller@10db0000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x10db0000 0x500>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>,
+				 <&clkmgr AGILEX5_L4_MP_CLK>;
+			clock-names = "core-clk", "cfgr-clk";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <2>;
+			snps,block-size = <32767 32767 32767 32767>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <8>;
+		};
+
+		dmac1: dma-controller@10dc0000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x10dc0000 0x500>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>,
+				 <&clkmgr AGILEX5_L4_MP_CLK>;
+			clock-names = "core-clk", "cfgr-clk";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			snps,dma-masters = <1>;
+			snps,data-width = <2>;
+			snps,block-size = <32767 32767 32767 32767>;
+			snps,priority = <0 1 2 3>;
+			snps,axi-max-burst-len = <8>;
+		};
+
+		rst: rstmgr@10d11000 {
+			compatible = "altr,stratix10-rst-mgr", "altr,rst-mgr";
+			reg = <0x10d11000 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		spi0: spi@10da4000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x10da4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			dmas = <&dmac0 2>, <&dmac0 3>;
+			dma-names ="tx", "rx";
+			status = "disabled";
+
+		};
+
+		spi1: spi@10da5000 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x10da5000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
+			reg-io-width = <4>;
+			num-cs = <4>;
+			clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@10d12000 {
+			compatible = "altr,sys-mgr-s10","altr,sys-mgr";
+			reg = <0x10d12000 0x500>;
+		};
+
+		timer0: timer0@10c03000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10c03000 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@10c03100 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10c03100 0x100>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@10d00000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10d00000 0x100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@10d00100 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x10d00100 0x100>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+			clock-names = "timer";
+		};
+
+		uart0: serial@10c02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10c02000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART0_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+		};
+
+		uart1: serial@10c02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10c02100 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			resets = <&rst UART1_RESET>;
+			status = "disabled";
+			clocks = <&clkmgr AGILEX5_L4_SP_CLK>;
+		};
+
+		usb0: usb@10b00000 {
+			compatible = "snps,dwc2";
+			reg = <0x10b00000 0x40000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
+			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX5_USB2OTG_HCLK>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@10d00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00200 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@10d00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00300 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@10d00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00400 0x100>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@10d00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00500 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		watchdog4: watchdog@10d00600 {
+			compatible = "snps,dw-wdt";
+			reg = <0x10d00600 0x100>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rst WATCHDOG4_RESET>;
+			clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>;
+			status = "disabled";
+		};
+
+		qspi: spi@108d2000 {
+			compatible = "intel,socfpga-qspi", "cdns,qspi-nor";
+			reg = <0x108d2000 0x100>,
+			      <0x10900000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
new file mode 100644
index 000000000..c533e5a3a
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023, Intel Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK";
+	compatible = "intel,socfpga-agilex5-socdk", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
new file mode 100644
index 000000000..1a32840c7
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex n6000";
+	compatible = "intel,socfpga-agilex-n6000", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	soc {
+		bus@80000000 {
+			compatible = "simple-bus";
+			reg = <0x80000000 0x60000000>,
+				<0xf9000000 0x00100000>;
+			reg-names = "axi_h2f", "axi_h2f_lw";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>;
+
+			dma-controller@0 {
+				compatible = "intel,hps-copy-engine";
+				reg = <0x00000000 0x00000000 0x00001000>;
+				#dma-cells = <1>;
+			};
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&fpga_mgr {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
new file mode 100644
index 000000000..053690657
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+	compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x04200000>;
+			};
+
+			root: partition@4200000 {
+				label = "Root Filesystem - UBIFS";
+				reg = <0x04200000 0x0BE00000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
new file mode 100644
index 000000000..0f9020bd0
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2019, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex SoCDK";
+	compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "hps_led0";
+			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			label = "hps_led1";
+			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			label = "hps_led2";
+			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		nand-bus-width = <16>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0 0x200000>;
+		};
+		partition@200000 {
+			label = "root";
+			reg = <0x200000 0x3fe00000>;
+		};
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
new file mode 100644
index 000000000..5ddfdff37
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2021, Intel Corporation
+ */
+#include "socfpga_agilex.dtsi"
+
+/ {
+	model = "eASIC N5X SoCDK";
+	compatible = "intel,n5x-socdk", "intel,socfpga-agilex";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	soc {
+		sdram_edac: memory-controller@f87f8000 {
+			compatible = "snps,ddrc-3.80a";
+			reg = <0xf87f8000 0x400>;
+			interrupts = <0 175 4>;
+			status = "okay";
+		};
+	};
+};
+
+&clkmgr {
+	compatible = "intel,easic-n5x-clkmgr";
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <4>;
+
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <900>; /* 0ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+		};
+	};
+};
+
+&mmc {
+	status = "okay";
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+	clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x03FE0000>;
+			};
+
+			qspi_rootfs: partition@3fe0000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x03FE0000 0x0C020000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	disable-over-current;
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/Makefile b/arch/arm64/boot/dts/lg/Makefile
new file mode 100644
index 000000000..4c3959e24
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
+dtb-$(CONFIG_ARCH_LG1K) += lg1313-ref.dtb
diff --git a/arch/arm64/boot/dts/lg/lg1312-ref.dts b/arch/arm64/boot/dts/lg/lg1312-ref.dts
new file mode 100644
index 000000000..260a2c5b1
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1312-ref.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1312 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1312.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1312 Reference Board";
+	compatible = "lge,lg1312-ref", "lge,lg1312";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
new file mode 100644
index 000000000..48ec4ebec
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1312 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1312";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c1b00000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc1b00000 0x1000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupt-cells = <3>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/lg/lg1313-ref.dts b/arch/arm64/boot/dts/lg/lg1313-ref.dts
new file mode 100644
index 000000000..e89ae8537
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1313-ref.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1313 Reference Board.
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+/dts-v1/;
+
+#include "lg1313.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	model = "LG Electronics, DTV SoC LG1313 Reference Board";
+	compatible = "lge,lg1313-ref", "lge,lg1313";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
new file mode 100644
index 000000000..3869460aa
--- /dev/null
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for lg1313 SoC
+ *
+ * Copyright (C) 2016, LG Electronics
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	compatible = "lge,lg1313";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	gic: interrupt-controller@c0001000 {
+		#interrupt-cells = <3>;
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		reg = <0x0 0xc0001000 0x1000>,
+		      <0x0 0xc0002000 0x2000>,
+		      <0x0 0xc0004000 0x2000>,
+		      <0x0 0xc0006000 0x2000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
+			      IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clk_bus: clk_bus {
+		#clock-cells = <0>;
+
+		compatible = "fixed-clock";
+		clock-frequency = <198000000>;
+		clock-output-names = "BUSCLK";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		eth0: ethernet@c3700000 {
+			compatible = "cdns,gem";
+			reg = <0x0 0xc3700000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "hclk", "pclk";
+			phy-mode = "rmii";
+			/* Filled in by boot */
+			mac-address = [ 00 00 00 00 00 00 ];
+		};
+	};
+
+	amba {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		#interrupt-cells = <3>;
+
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timers: timer@fd100000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x0 0xfd100000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+		wdog: watchdog@fd200000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x0 0xfd200000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>, <&clk_bus>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+		uart0: serial@fe000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe000000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@fe100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe100000 0x1000>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@fe200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfe200000 0x1000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		spi0: spi@fe800000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe800000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		spi1: spi@fe900000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x0 0xfe900000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		dmac0: dma-controller@c1128000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0xc1128000 0x1000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+		gpio0: gpio@fd400000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd400000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio1: gpio@fd410000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd410000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio2: gpio@fd420000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd420000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio3: gpio@fd430000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd430000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio4: gpio@fd440000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd440000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio5: gpio@fd450000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd450000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio6: gpio@fd460000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd460000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio7: gpio@fd470000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd470000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio8: gpio@fd480000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd480000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio9: gpio@fd490000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd490000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio10: gpio@fd4a0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4a0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio11: gpio@fd4b0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4b0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+		gpio12: gpio@fd4c0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4c0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio13: gpio@fd4d0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4d0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio14: gpio@fd4e0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4e0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio15: gpio@fd4f0000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd4f0000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio16: gpio@fd500000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd500000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+		gpio17: gpio@fd510000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0x0 0xfd510000 0x1000>;
+			clocks = <&clk_bus>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
new file mode 100644
index 000000000..79ac09b58
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-ultra.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-gl-mv1000.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-mochabin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-puzzle-m801.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
new file mode 100644
index 000000000..62d03ffa9
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell AC5 SoC";
+	compatible = "marvell,ac5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges;
+
+		internal-regs@7f000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 16M internal register @ 0x7f00_0000 */
+			ranges = <0x0 0x0 0x7f000000 0x1000000>;
+			dma-coherent;
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "okay";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			mdio: mdio@22004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x22004 0x4>;
+				clocks = <&cnm_clock>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-1 = <&i2c0_gpio>;
+				scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-1 = <&i2c1_gpio>;
+				scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl0 0 0 32>;
+				marvell,pwm-offset = <0x1f0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				reg = <0x18140 0x40>;
+				compatible = "marvell,orion-gpio";
+				ngpios = <14>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinctrl0 0 32 14>;
+				marvell,pwm-offset = <0x1f0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		/*
+		 * Dedicated section for devices behind 32bit controllers so we
+		 * can configure specific DMA mapping for them
+		 */
+		behind-32bit-controller@7f000000 {
+			compatible = "simple-bus";
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>;
+			/* Host phy ram starts at 0x200M */
+			dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>;
+			dma-coherent;
+
+			eth0: ethernet@20000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x20000 0x0 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			eth1: ethernet@24000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x24000 0x0 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			usb0: usb@80000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x0 0x80000 0x0 0x500>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb1: usb@a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x0 0xa0000 0x0 0x500>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		pinctrl0: pinctrl@80020100 {
+			compatible = "marvell,ac5-pinctrl";
+			reg = <0 0x80020100 0 0x20>;
+
+			i2c0_pins: i2c0-pins {
+				marvell,pins = "mpp26", "mpp27";
+				marvell,function = "i2c0";
+			};
+
+			i2c0_gpio: i2c0-gpio-pins {
+				marvell,pins = "mpp26", "mpp27";
+				marvell,function = "gpio";
+			};
+
+			i2c1_pins: i2c1-pins {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "i2c1";
+			};
+
+			i2c1_gpio: i2c1-gpio-pins {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "i2c1";
+			};
+		};
+
+		spi0: spi@805a0000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a0000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi1: spi@805a8000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a8000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		nand: nand-controller@805b0000 {
+			compatible = "marvell,ac5-nand-controller";
+			reg =  <0x0 0x805b0000 0x0 0x00000054>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nand_clock>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@80600000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */
+			      <0x0 0x80660000 0x0 0x40000>; /* GICR */
+			interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	clocks {
+		cnm_clock: cnm-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <328000000>;
+		};
+
+		spi_clock: spi-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		nand_clock: nand-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
new file mode 100644
index 000000000..f0ebdb84e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx-rd.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For RD-AC5X.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+/*
+ * Device Tree file for Marvell Alleycat 5X development board
+ * This board file supports the B configuration of the board
+ */
+
+/dts-v1/;
+
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+	model = "Marvell RD-AC5X Board";
+	compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
+
+	aliases {
+		serial0 = &uart0;
+		spiflash0 = &spiflash0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x2 0x00000000 0x0 0x40000000>;
+	};
+
+	usb1phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+};
+
+/* USB0 is a host USB */
+&usb0 {
+	status = "okay";
+};
+
+/* USB1 is a peripheral USB */
+&usb1 {
+	status = "okay";
+	phys = <&usb1phy>;
+	phy-names = "usb-phy";
+	dr_mode = "peripheral";
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "spi_flash_part0";
+			reg = <0x0 0x800000>;
+		};
+
+		parition@1 {
+			label = "spi_flash_part1";
+			reg = <0x800000 0x700000>;
+		};
+
+		parition@2 {
+			label = "spi_flash_part2";
+			reg = <0xF00000 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi
new file mode 100644
index 000000000..2ab72f854
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx35xx.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5X.
+ *
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include "ac5-98dx25xx.dtsi"
+
+/ {
+	model = "Marvell AC5X SoC";
+	compatible = "marvell,ac5x", "marvell,ac5";
+};
+
+&cnm_clock {
+	clock-frequency = <325000000>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
new file mode 100644
index 000000000..dc1182ec9
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 371x family of SoCs
+ * (also named 88F3710)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3710 SoC";
+	compatible = "marvell,armada3710", "marvell,armada3700";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
new file mode 100644
index 000000000..0cfb38492
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 3720 development board
+ * (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3700";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&exp_usb3_vbus>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vcc_sd_reg2: regulator-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+&eth1 {
+	phy-mode = "sgmii";
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	gpio_exp: pca9555@22 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0x22>;
+		/*
+		 * IO0_0: PWR_EN_USB2	IO1_0: PWR_EN_VTT
+		 * IO0_1: PWR_EN_USB23	IO1_1: MPCIE_WDISABLE
+		 * IO0_2: PWR_EN_SATA	IO1_2: RGMII_DEV_RSTN
+		 * IO0_3: PWR_EN_PCIE	IO1_3: SGMII_DEV_RSTN
+		 * IO0_4: PWR_EN_SD
+		 * IO0_5: PWR_EN_EMMC
+		 * IO0_6: PWR_EN_RGMII	IO1_6: SATA_USB3.0_SEL
+		 * IO0_7: PWR_EN_SGMII	IO1_7: PWR_MCI_PS
+		 */
+	};
+
+	rtc@68  {
+		/* PT7C4337A from pericom fully compatible with the ds1337 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* CON3 */
+&sata {
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	vmmc-supply = <&vcc_sd_reg2>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "U-boot Env";
+				reg = <0x200000 0x10000>;
+			};
+			partition@210000 {
+				label = "Linux";
+				reg = <0x210000 0xDF0000>;
+			};
+		};
+	};
+};
+
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/* CON26(V2.0)/CON28(V1.4) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
+	status = "okay";
+};
+
+/* CON29(V2.0)/CON31(V1.4) */
+&usb3 {
+	status = "okay";
+	usb-phy = <&usb3_phy>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
new file mode 100644
index 000000000..57fc698e5
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode eDPU Board";
+	compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710";
+};
+
+&eth0 {
+	phy-mode = "2500base-x";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
new file mode 100644
index 000000000..6715a19c1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
+	compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3700";
+};
+
+&sdhci0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
new file mode 100644
index 000000000..f9abef8dc
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra board.
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ *
+ * Jason Hung <jhung@globalscaletechnologies.com>
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+	compatible = "globalscale,espressobin-ultra", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3700";
+
+	aliases {
+		/* ethernet1 is WAN port */
+		ethernet1 = &switch0port5;
+		ethernet2 = &switch0port1;
+		ethernet3 = &switch0port2;
+		ethernet4 = &switch0port3;
+		ethernet5 = &switch0port4;
+	};
+
+	/delete-node/ regulator;
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+	};
+
+	gpio-leds {
+		pinctrl-names = "default";
+		compatible = "gpio-leds";
+		/* No assigned functions to the LEDs by default */
+		led1 {
+			label = "ebin-ultra:blue:led1";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+		led2 {
+			label = "ebin-ultra:green:led2";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+		led3 {
+			label = "ebin-ultra:red:led3";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+		led4 {
+			label = "ebin-ultra:yellow:led4";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	/delete-property/ vqmmc-supply;
+	status = "disabled";
+};
+
+&spi0 {
+	flash@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x3e0000>;
+			};
+			partition@3e0000 {
+				label = "hw-info";
+				reg = <0x3e0000 0x10000>;
+				read-only;
+			};
+			partition@3f0000 {
+				label = "u-boot-env";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <100000>;
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&usb3 {
+	usb-phy = <&usb3_phy>;
+};
+
+&mdio {
+	extphy: ethernet-phy@1 {
+		reg = <1>;
+
+		reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&switch0 {
+	reg = <3>;
+
+	reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+
+	ports {
+		switch0port1: port@1 {
+			reg = <1>;
+			label = "lan0";
+			phy-handle = <&switch0phy0>;
+		};
+
+		switch0port2: port@2 {
+			reg = <2>;
+			label = "lan1";
+			phy-handle = <&switch0phy1>;
+		};
+
+		switch0port3: port@3 {
+			reg = <3>;
+			label = "lan2";
+			phy-handle = <&switch0phy2>;
+		};
+
+		switch0port4: port@4 {
+			reg = <4>;
+			label = "lan3";
+			phy-handle = <&switch0phy3>;
+		};
+
+		switch0port5: port@5 {
+			reg = <5>;
+			label = "wan";
+			phy-handle = <&extphy>;
+			phy-mode = "sgmii";
+		};
+	};
+
+	mdio {
+		switch0phy3: switch0phy3@14 {
+			reg = <0x14>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
new file mode 100644
index 000000000..2a8aa3901
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
+	compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
+		     "globalscale,espressobin", "marvell,armada3720",
+		     "marvell,armada3700";
+
+	aliases {
+		/* ethernet1 is wan port */
+		ethernet1 = &switch0port3;
+		ethernet3 = &switch0port1;
+	};
+};
+
+&switch0port1 {
+	label = "lan1";
+};
+
+&switch0port3 {
+	label = "wan";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&led2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
new file mode 100644
index 000000000..b03af8761
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
+ * Copyright (C) 2018 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ * Konstantin Porotchkin <kostap@marvell.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2020/05/ESPRESSObin_V7-0_Schematic.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board V7";
+	compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
+		     "marvell,armada3720", "marvell,armada3700";
+
+	aliases {
+		/* ethernet1 is wan port */
+		ethernet1 = &switch0port3;
+		ethernet3 = &switch0port1;
+	};
+};
+
+&switch0port1 {
+	label = "lan1";
+};
+
+&switch0port3 {
+	label = "wan";
+};
+
+&led2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
new file mode 100644
index 000000000..c5a834b33
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+/*
+ * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf
+ */
+
+/dts-v1/;
+
+#include "armada-3720-espressobin.dtsi"
+
+/ {
+	model = "Globalscale Marvell ESPRESSOBin Board";
+	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3700";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
new file mode 100644
index 000000000..5fc613d24
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Globalscale Marvell ESPRESSOBin Board
+ * Copyright (C) 2016 Marvell
+ *
+ * Romain Perier <romain.perier@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		/* for dsa slave device */
+		ethernet1 = &switch0port1;
+		ethernet2 = &switch0port2;
+		ethernet3 = &switch0port3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	led2: gpio-led2 {
+		/* led2 is working only on v7 board */
+		status = "disabled";
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "led2";
+			gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+/* J9 */
+&pcie0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+};
+
+/* J6 */
+&sata {
+	status = "okay";
+};
+
+/* U11 */
+&sdhci0 {
+	/* Main DTS file for Espressobin is without eMMC */
+	status = "disabled";
+
+	non-removable;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+/* J1 */
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+	};
+};
+
+/* Exported on the micro USB connector J5 through an FTDI */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+/*
+ * Connector J17 and J18 expose a number of different features. Some pins are
+ * multiplexed. This is the case for instance for the following features:
+ * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of
+ *   how to enable it. Beware that the signals are 1.8V TTL.
+ * - I2C
+ * - SPI
+ * - MMC
+ */
+
+/* J7 */
+&usb3 {
+	status = "okay";
+};
+
+/* J8 */
+&usb2 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0port0: port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			switch0port1: port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			switch0port2: port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+			};
+
+			switch0port3: port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
new file mode 100644
index 000000000..b1b45b4fa
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "GL.iNet GL-MV1000";
+	compatible = "glinet,gl-mv1000", "marvell,armada3720";
+
+	aliases {
+		led-boot = &led_power;
+		led-failsafe = &led_power;
+		led-running = &led_power;
+		led-upgrade = &led_power;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios-states = <0>;
+		states = <1800000 0x1
+			3300000 0x0>;
+		enable-active-high;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch {
+			label = "switch";
+			linux,code = <BTN_0>;
+			gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		vpn {
+			label = "green:vpn";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "green:wan";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led_power: power {
+			label = "green:power";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0 0xf0000>;
+			};
+
+			partition@f0000 {
+				label = "u-boot-env";
+				reg = <0xf0000 0x8000>;
+			};
+
+			factory: partition@f8000 {
+				label = "factory";
+				reg = <0xf8000 0x8000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "dtb";
+				reg = <0x100000 0x10000>;
+				read-only;
+			};
+
+			partition@110000 {
+				label = "rescue";
+				reg = <0x110000 0x1000000>;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+	marvell,pad-type = "sd";
+	no-1-8-v;
+	vqmmc-supply = <&vcc_sd_reg1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	marvell,pad-type = "fixed-1-8v";
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	switch0: switch0@1 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+
+		dsa,member = <0 0>;
+
+		ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&eth0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "wan";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan0";
+				phy-handle = <&switch0phy1>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+				phy-handle = <&switch0phy2>;
+
+				nvmem-cells = <&macaddr_factory_6>;
+				nvmem-cell-names = "mac-address";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+		};
+	};
+};
+
+&eth0 {
+	nvmem-cells = <&macaddr_factory_0>;
+	nvmem-cell-names = "mac-address";
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_0: macaddr@0 {
+		reg = <0x0 0x6>;
+	};
+
+	macaddr_factory_6: macaddr@6 {
+		reg = <0x6 0x6>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
new file mode 100644
index 000000000..805ef2d79
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -0,0 +1,874 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CZ.NIC Turris Mox Board
+ * 2019 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "CZ.NIC Turris Mox Board";
+	compatible = "cznic,turris-mox", "marvell,armada3720",
+		     "marvell,armada3700";
+
+	aliases {
+		spi0 = &spi0;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led {
+			label = "mox:red:activity";
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vsdio_reg: vsdio-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdio";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	sdhci1_pwrseq: sdhci1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+
+		/* enabled by U-Boot if SFP module is present */
+		status = "disabled";
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	/delete-property/ mrvl,i2c-fast-mode;
+	status = "okay";
+
+	/* MCP7940MT-I/MNY RTC */
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	status = "okay";
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	slot-power-limit-milliwatt = <10000>;
+	/*
+	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
+	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
+	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
+	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
+	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
+	 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
+	 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
+	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
+	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
+	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
+	 */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	ranges = <0x81000000 0 0xe8000000   0 0xe8000000   0 0x01000000   /* Port 0 IO */
+		  0x82000000 0 0xe9000000   0 0xe9000000   0 0x07000000>; /* Port 0 MEM */
+
+	/* enabled by U-Boot if PCIe module is present */
+	status = "disabled";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&eth1 {
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+};
+
+&sdhci0 {
+	wp-inverted;
+	bus-width = <4>;
+	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&vsdc_reg>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pins>;
+	non-removable;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vsdio_reg>;
+	mmc-pwrseq = <&sdhci1_pwrseq>;
+	/* forbid SDR104 for FCC purposes */
+	sdhci-caps-mask = <0x2 0x0>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
+	assigned-clocks = <&nb_periph_clk 7>;
+	assigned-clock-parents = <&tbg 1>;
+	assigned-clock-rates = <20000000>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "secure-firmware";
+				reg = <0x0 0x20000>;
+			};
+
+			partition@20000 {
+				label = "a53-firmware";
+				reg = <0x20000 0x160000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+
+			partition@190000 {
+				label = "Rescue system";
+				reg = <0x190000 0x660000>;
+			};
+
+			partition@7f0000 {
+				label = "dtb";
+				reg = <0x7f0000 0x10000>;
+			};
+		};
+	};
+
+	moxtet: moxtet@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "cznic,moxtet";
+		reg = <1>;
+		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gpiosb>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		status = "okay";
+
+		moxtet_sfp: gpio@0 {
+			compatible = "cznic,moxtet-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			status = "disabled";
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&comphy2 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&exp_usb3_vbus>;
+	};
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&comphy2 0>;
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	/* switch nodes are enabled by U-Boot if modules are present */
+	switch0@10 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x10>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(0)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <0x9>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+
+			switch0port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port9 &switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch0@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		dsa,member = <0 0>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1_topaz: switch0phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy2_topaz: switch0phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy3_topaz: switch0phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy4_topaz: switch0phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan1";
+				phy-handle = <&switch0phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan2";
+				phy-handle = <&switch0phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan3";
+				phy-handle = <&switch0phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan4";
+				phy-handle = <&switch0phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "cpu";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				ethernet = <&eth1>;
+			};
+		};
+	};
+
+	switch1@11 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x11>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(1)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1: switch1phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch1phy2: switch1phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch1phy3: switch1phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch1phy4: switch1phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch1phy5: switch1phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch1phy6: switch1phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch1phy7: switch1phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch1phy8: switch1phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan13";
+				phy-handle = <&switch1phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan14";
+				phy-handle = <&switch1phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan15";
+				phy-handle = <&switch1phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan16";
+				phy-handle = <&switch1phy8>;
+			};
+
+			switch1port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+
+			switch1port10: port@a {
+				reg = <0xa>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch2port9>;
+				status = "disabled";
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch1@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		dsa,member = <0 1>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch1phy1_topaz: switch1phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch1phy2_topaz: switch1phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch1phy3_topaz: switch1phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch1phy4_topaz: switch1phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan9";
+				phy-handle = <&switch1phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan10";
+				phy-handle = <&switch1phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan11";
+				phy-handle = <&switch1phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan12";
+				phy-handle = <&switch1phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch0port10>;
+			};
+		};
+	};
+
+	switch2@12 {
+		compatible = "marvell,mv88e6190";
+		reg = <0x12>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_PERIDOT(2)>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1: switch2phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch2phy2: switch2phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch2phy3: switch2phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch2phy4: switch2phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch2phy5: switch2phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch2phy6: switch2phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch2phy7: switch2phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch2phy8: switch2phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "lan21";
+				phy-handle = <&switch2phy5>;
+			};
+
+			port@6 {
+				reg = <0x6>;
+				label = "lan22";
+				phy-handle = <&switch2phy6>;
+			};
+
+			port@7 {
+				reg = <0x7>;
+				label = "lan23";
+				phy-handle = <&switch2phy7>;
+			};
+
+			port@8 {
+				reg = <0x8>;
+				label = "lan24";
+				phy-handle = <&switch2phy8>;
+			};
+
+			switch2port9: port@9 {
+				reg = <0x9>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+
+			port-sfp@a {
+				reg = <0xa>;
+				label = "sfp";
+				sfp = <&sfp>;
+				phy-mode = "sgmii";
+				managed = "in-band-status";
+				status = "disabled";
+			};
+		};
+	};
+
+	switch2@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		dsa,member = <0 2>;
+		interrupt-parent = <&moxtet>;
+		interrupts = <MOXTET_IRQ_TOPAZ>;
+		status = "disabled";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch2phy1_topaz: switch2phy1@11 {
+				reg = <0x11>;
+			};
+
+			switch2phy2_topaz: switch2phy2@12 {
+				reg = <0x12>;
+			};
+
+			switch2phy3_topaz: switch2phy3@13 {
+				reg = <0x13>;
+			};
+
+			switch2phy4_topaz: switch2phy4@14 {
+				reg = <0x14>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <0x1>;
+				label = "lan17";
+				phy-handle = <&switch2phy1_topaz>;
+			};
+
+			port@2 {
+				reg = <0x2>;
+				label = "lan18";
+				phy-handle = <&switch2phy2_topaz>;
+			};
+
+			port@3 {
+				reg = <0x3>;
+				label = "lan19";
+				phy-handle = <&switch2phy3_topaz>;
+			};
+
+			port@4 {
+				reg = <0x4>;
+				label = "lan20";
+				phy-handle = <&switch2phy4_topaz>;
+			};
+
+			port@5 {
+				reg = <0x5>;
+				label = "dsa";
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+				link = <&switch1port10 &switch0port10>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
new file mode 100644
index 000000000..c76eceabd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "armada-3720-uDPU.dtsi"
+
+/ {
+	model = "Methode uDPU Board";
+	compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710";
+
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&pinctrl_nb {
+	i2c1_recovery_pins: i2c1-recovery-pins {
+		groups = "i2c1";
+		function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&eth0 {
+	phy-mode = "sgmii";
+	sfp = <&sfp_eth0>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
new file mode 100644
index 000000000..3f7992337
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree for the uDPU board.
+ * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Methode Electronics
+ * Copyright (C) 2019 Telus
+ *
+ * Vladimir Vid <vladimir.vid@sartura.hr>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-372x.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power1 {
+			label = "udpu:green:power";
+			gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power2 {
+			label = "udpu:red:power";
+			gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network1 {
+			label = "udpu:green:network";
+			gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-network2 {
+			label = "udpu:red:network";
+			gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm1 {
+			label = "udpu:green:alarm";
+			gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-alarm2 {
+			label = "udpu:red:alarm";
+			gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	marvell,pad-type = "fixed-1-8v";
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x180000>;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x10000>;
+			};
+		};
+	};
+};
+
+&pinctrl_nb {
+	i2c2_recovery_pins: i2c2-recovery-pins {
+		groups = "i2c2";
+		function = "gpio";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_recovery_pins>;
+	/delete-property/mrvl,i2c-fast-mode;
+	scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	temp-sensor@48 {
+		compatible = "ti,tmp75c";
+		reg = <0x48>;
+	};
+
+	temp-sensor@49 {
+		compatible = "ti,tmp75c";
+		reg = <0x49>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy1 0>;
+};
+
+&eth1 {
+	phy-mode = "sgmii";
+	status = "okay";
+	managed = "in-band-status";
+	phys = <&comphy0 1>;
+	sfp = <&sfp_eth1>;
+};
+
+&usb3 {
+	status = "okay";
+	phys = <&usb2_utmi_otg_phy>;
+	phy-names = "usb2-utmi-otg-phy";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
new file mode 100644
index 000000000..02ae1e153
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 372x family of SoCs
+ * (also named 88F3720)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 SoC";
+	compatible = "marvell,armada3720", "marvell,armada3700";
+
+	cpus {
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
new file mode 100644
index 000000000..e300145ad
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The PSCI firmware region depicted below is the default one
+		 * and should be updated by the bootloader.
+		 */
+		psci-area@4000000 {
+			reg = <0 0x4000000 0 0x200000>;
+			no-map;
+		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&nb_periph_clk 16>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs@d0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			wdt: watchdog@8300 {
+				compatible = "marvell,armada-3700-wdt";
+				reg = <0x8300 0x40>;
+				marvell,system-controller = <&cpu_misc>;
+				clocks = <&xtalclk>;
+			};
+
+			cpu_misc: system-controller@d000 {
+				compatible = "marvell,armada-3700-cpu-misc",
+					     "syscon";
+				reg = <0xd000 0x1000>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-3700-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10600 0xA00>;
+				clocks = <&nb_periph_clk 7>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				num-cs = <4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11000 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 10>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11080 {
+				compatible = "marvell,armada-3700-i2c";
+				reg = <0x11080 0x24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&nb_periph_clk 9>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			avs: avs@11500 {
+				compatible = "marvell,armada-3700-avs",
+					     "syscon";
+				reg = <0x11500 0x40>;
+			};
+
+			uartclk: clock-controller@12010 {
+				compatible = "marvell,armada-3700-uart-clock";
+				reg = <0x12010 0x4>, <0x12210 0x4>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+					 <&tbg 3>, <&xtalclk>;
+				clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
+					      "TBG-B-S", "xtal";
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x18>;
+				clocks = <&uartclk 0>;
+				interrupts =
+				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			uart1: serial@12200 {
+				compatible = "marvell,armada-3700-uart-ext";
+				reg = <0x12200 0x30>;
+				clocks = <&uartclk 1>;
+				interrupts =
+				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "uart-tx", "uart-rx";
+				status = "disabled";
+			};
+
+			nb_periph_clk: nb-periph-clk@13000 {
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
+				reg = <0x13000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			sb_periph_clk: sb-periph-clk@18000 {
+				compatible = "marvell,armada-3700-periph-clock-sb";
+				reg = <0x18000 0x100>;
+				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
+				<&tbg 3>, <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			tbg: tbg@13200 {
+				compatible = "marvell,armada-3700-tbg-clock";
+				reg = <0x13200 0x100>;
+				clocks = <&xtalclk>;
+				#clock-cells = <1>;
+			};
+
+			pinctrl_nb: pinctrl@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				/* MPP1[19:0] */
+				gpionb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				xtalclk: xtal-clk {
+					compatible = "marvell,armada-3700-xtal-clock";
+					clock-output-names = "xtal";
+					#clock-cells = <0>;
+				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				spi_cs1_pins: spi-cs1-pins {
+					groups = "spi_cs1";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+
+				mmc_pins: mmc-pins {
+					groups = "emmc_nb";
+					function = "emmc";
+				};
+			};
+
+			nb_pm: syscon@14000 {
+				compatible = "marvell,armada-3700-nb-pm",
+					     "syscon";
+				reg = <0x14000 0x60>;
+			};
+
+			comphy: phy@18300 {
+				compatible = "marvell,comphy-a3700";
+				reg = <0x18300 0x300>,
+				      <0x1F000 0x400>,
+				      <0x5C000 0x400>,
+				      <0xe0178 0x8>;
+				reg-names = "comphy",
+					    "lane1_pcie_gbe",
+					    "lane0_usb3_gbe",
+					    "lane2_sata_usb3";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&xtalclk>;
+				clock-names = "xtal";
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+			};
+
+			pinctrl_sb: pinctrl@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+					     "syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				/* MPP2[23:0] */
+				gpiosb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 30>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
+				smi_pins: smi-pins {
+					groups = "smi";
+					function = "smi";
+				};
+
+				sdio_pins: sdio-pins {
+					groups = "sdio_sb";
+					function = "sdio";
+				};
+
+				pcie_reset_pins: pcie-reset-pins {
+					groups = "pcie1"; /* this actually controls "pcie1_reset" */
+					function = "gpio";
+				};
+
+				pcie_clkreq_pins: pcie-clkreq-pins {
+					groups = "pcie1_clkreq";
+					function = "pcie";
+				};
+			};
+
+			eth0: ethernet@30000 {
+				   compatible = "marvell,armada-3700-neta";
+				   reg = <0x30000 0x4000>;
+				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				   clocks = <&sb_periph_clk 8>;
+				   status = "disabled";
+			};
+
+			mdio: mdio@32004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x32004 0x4>;
+			};
+
+			eth1: ethernet@40000 {
+				compatible = "marvell,armada-3700-neta";
+				reg = <0x40000 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 7>;
+				status = "disabled";
+			};
+
+			usb3: usb@58000 {
+				compatible = "marvell,armada3700-xhci",
+				"generic-xhci";
+				reg = <0x58000 0x4000>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sb_periph_clk 12>;
+				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
+				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
+				status = "disabled";
+			};
+
+			usb2_utmi_otg_phy: phy@5d000 {
+				compatible = "marvell,a3700-utmi-otg-phy";
+				reg = <0x5d000 0x800>;
+				marvell,usb-misc-reg = <&usb32_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb32_syscon: system-controller@5d800 {
+				compatible = "marvell,armada-3700-usb2-host-device-misc",
+				"syscon";
+				reg = <0x5d800 0x800>;
+			};
+
+			usb2: usb@5e000 {
+				compatible = "marvell,armada-3700-ehci";
+				reg = <0x5e000 0x1000>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_utmi_host_phy>;
+				phy-names = "usb2-utmi-host-phy";
+				status = "disabled";
+			};
+
+			usb2_utmi_host_phy: phy@5f000 {
+				compatible = "marvell,a3700-utmi-host-phy";
+				reg = <0x5f000 0x800>;
+				marvell,usb-misc-reg = <&usb2_syscon>;
+				#phy-cells = <0>;
+			};
+
+			usb2_syscon: system-controller@5f800 {
+				compatible = "marvell,armada-3700-usb2-host-misc",
+				"syscon";
+				reg = <0x5f800 0x800>;
+			};
+
+			xor@60900 {
+				compatible = "marvell,armada-3700-xor";
+				reg = <0x60900 0x100>,
+				      <0x60b00 0x100>;
+
+				xor10 {
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			crypto: crypto@90000 {
+				compatible = "inside-secure,safexcel-eip97ies";
+				reg = <0x90000 0x20000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mem", "ring0", "ring1",
+						  "ring2", "ring3", "eip";
+				clocks = <&nb_periph_clk 15>;
+			};
+
+			rwtm: mailbox@b0000 {
+				compatible = "marvell,armada-3700-rwtm-mailbox";
+				reg = <0xb0000 0x100>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+			};
+
+			sdhci1: mmc@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd0000 0x300>,
+				      <0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sdhci0: mmc@d8000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd8000 0x300>,
+				      <0x17808 0x4>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
+			sata: sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x178>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 1>;
+				phys = <&comphy2 0>;
+				phy-names = "sata-phy";
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>, /* GICR */
+				      <0x1d80000 0x2000>,  /* GICC */
+				      <0x1d90000 0x2000>,  /* GICH */
+				      <0x1da0000 0x20000>; /* GICV */
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie0: pcie@d0070000 {
+			compatible = "marvell,armada-3700-pcie";
+			device_type = "pci";
+			status = "disabled";
+			reg = <0 0xd0070000 0 0x20000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			clocks = <&sb_periph_clk 13>;
+			msi-parent = <&pcie0>;
+			msi-controller;
+			/*
+			 * The 128 MiB address range [0xe8000000-0xf0000000] is
+			 * dedicated for PCIe and can be assigned to 8 windows
+			 * with size a power of two. Use one 64 KiB window for
+			 * IO at the end and the remaining seven windows
+			 * (totaling 127 MiB) for MEM.
+			 */
+			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			max-link-speed = <2>;
+			phys = <&comphy1 0>;
+			pcie_intc: interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware";
+			mboxes = <&rwtm 0>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
new file mode 100644
index 000000000..4e46326dd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
+ * one CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+	model = "Marvell Armada 7020";
+	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
new file mode 100644
index 000000000..5e5baf6be
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board";
+	compatible = "marvell,armada7040-db", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+	};
+
+	cp0_exp_usb3_0_current_regulator: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0-usb3-0-current-regulator";
+		regulator-type = "current";
+		regulator-min-microamp = <500000>;
+		regulator-max-microamp = <900000>;
+		gpios = <&expander0 4 GPIO_ACTIVE_HIGH>;
+		states = <500000 0x0
+			  900000 0x1>;
+		enable-active-high;
+		gpios-states = <0>;
+	};
+
+	cp0_exp_usb3_1_current_regulator: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0-usb3-1-current-regulator";
+		regulator-type = "current";
+		regulator-min-microamp = <500000>;
+		regulator-max-microamp = <900000>;
+		gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		states = <500000 0x0
+			  900000 0x1>;
+		enable-active-high;
+		gpios-states = <0>;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&cp0_exp_usb3_0_current_regulator>;
+	};
+
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&cp0_exp_usb3_1_current_regulator>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+
+&cp0_pcie2 {
+	status = "okay";
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+		/*
+		 * IO0_0: USB3_PWR_EN0	IO1_0: USB_3_1_Dev_Detect
+		 * IO0_1: USB3_PWR_EN1	IO1_1: USB2_1_current_limit
+		 * IO0_2: DDR3_4_Detect	IO1_2: Hcon_IO_RstN
+		 * IO0_3: USB2_DEVICE_DETECT
+		 * IO0_4: GPIO_0	IO1_4: SD_Status
+		 * IO0_5: GPIO_1	IO1_5: LDO_5V_Enable
+		 * IO0_6: IHB_5V_Enable	IO1_6: PWR_EN_eMMC
+		 * IO0_7:		IO1_7: SDIO_Vcntrl
+		 */
+	};
+};
+
+&cp0_nand_controller {
+	/*
+	 * SPI on CPM and NAND have common pins on this board. We can
+	 * use only one at a time. To enable the NAND (which will
+	 * disable the SPI), the "status = "okay";" line have to be
+	 * added here.
+	 */
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+
+		};
+	};
+};
+
+&cp0_spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_comphy1 {
+	cp0_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&cp0_reg_usb3_0_vbus>;
+	};
+};
+
+&cp0_usb3_0 {
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "cp0-usb3h0-comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_comphy4 {
+	cp0_usbh1_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&cp0_reg_usb3_1_vbus>;
+	};
+};
+
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "cp0-usb3h1-comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy2 0>;
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth1 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
new file mode 100644
index 000000000..48202810b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree file for Globalscale MOCHAbin
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ * Copyright (C) 2021 Sartura Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Globalscale MOCHAbin";
+	compatible = "globalscale,mochabin", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		ethernet6 = &swport4;
+	};
+
+	/* SFP+ 10G */
+	sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* SFP 1G */
+	sfp_eth2: sfp-eth2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c0>;
+		los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* microUSB UART console */
+&uart0 {
+	status = "okay";
+
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+/* eMMC */
+&ap_sdhci0 {
+	status = "okay";
+
+	bus-width = <4>;
+	non-removable;
+	/delete-property/ marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+};
+
+&cp0_pinctrl {
+	cp0_uart0_pins: cp0-uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+
+	cp0_spi0_pins: cp0-spi0-pins {
+		marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59";
+		marvell,function = "spi0";
+	};
+
+	cp0_spi1_pins: cp0-spi1-pins {
+		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+
+	cp0_i2c0_pins: cp0-i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+
+	cp0_i2c1_pins: cp0-i2c1-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c1";
+	};
+
+	pca9554_int_pins: pca9554-int-pins {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	cp0_rgmii1_pins: cp0-rgmii1-pins {
+		marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49",
+			       "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55";
+		marvell,function = "ge1";
+	};
+
+	is31_sdb_pins: is31-sdb-pins {
+		marvell,pins = "mpp30";
+		marvell,function = "gpio";
+	};
+
+	cp0_pcie_reset_pins: cp0-pcie-reset-pins {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	cp0_pcie_clkreq_pins: cp0-pcie-clkreq-pins {
+		marvell,pins = "mpp5";
+		marvell,function = "pcie1";
+	};
+
+	cp0_switch_pins: cp0-switch-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	cp0_phy_pins: cp0-phy-pins {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+};
+
+/* mikroBUS UART */
+&cp0_uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart0_pins>;
+};
+
+/* mikroBUS SPI */
+&cp0_spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+};
+
+/* SPI-NOR */
+&cp0_spi1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x3e0000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "hw-info";
+				reg = <0x3e0000 0x10000>;
+				read-only;
+			};
+
+			partition@3f0000 {
+				label = "u-boot-env";
+				reg = <0x3f0000 0x10000>;
+			};
+		};
+	};
+};
+
+/* mikroBUS, 1G SFP and GPIO expander */
+&cp0_i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	sfp_gpio: pca9554@39 {
+		compatible = "nxp,pca9554";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pca9554_int_pins>;
+		reg = <0x39>;
+
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		/*
+		 * IO0_0: SFP+_TX_FAULT
+		 * IO0_1: SFP+_TX_DISABLE
+		 * IO0_2: SFP+_PRSNT
+		 * IO0_3: SFP+_LOSS
+		 * IO0_4: SFP_TX_FAULT
+		 * IO0_5: SFP_TX_DISABLE
+		 * IO0_6: SFP_PRSNT
+		 * IO0_7: SFP_LOSS
+		 */
+	};
+};
+
+/* IS31FL3199, mini-PCIe and 10G SFP+ */
+&cp0_i2c1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+
+	leds@64 {
+		compatible = "issi,is31fl3199";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&is31_sdb_pins>;
+		shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>;
+		reg = <0x64>;
+
+		led1_red: led@1 {
+			label = "red:led1";
+			reg = <1>;
+			led-max-microamp = <20000>;
+		};
+
+		led1_green: led@2 {
+			label = "green:led1";
+			reg = <2>;
+		};
+
+		led1_blue: led@3 {
+			label = "blue:led1";
+			reg = <3>;
+		};
+
+		led2_red: led@4 {
+			label = "red:led2";
+			reg = <4>;
+		};
+
+		led2_green: led@5 {
+			label = "green:led2";
+			reg = <5>;
+		};
+
+		led2_blue: led@6 {
+			label = "blue:led2";
+			reg = <6>;
+		};
+
+		led3_red: led@7 {
+			label = "red:led3";
+			reg = <7>;
+		};
+
+		led3_green: led@8 {
+			label = "green:led3";
+			reg = <8>;
+		};
+
+		led3_blue: led@9 {
+			label = "blue:led3";
+			reg = <9>;
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	/* 88E1512 PHY */
+	eth2phy: ethernet-phy@1 {
+		reg = <1>;
+		sfp = <&sfp_eth2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_phy_pins>;
+		reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 88E6141 Topaz switch */
+	switch: switch@3 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_switch_pins>;
+		reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "lan0";
+				phy-handle = <&swphy1>;
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&swphy2>;
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "lan2";
+				phy-handle = <&swphy3>;
+			};
+
+			swport4: port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&swphy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp0_eth1>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swphy1: swphy1@17 {
+				reg = <17>;
+			};
+
+			swphy2: swphy2@18 {
+				reg = <18>;
+			};
+
+			swphy3: swphy3@19 {
+				reg = <19>;
+			};
+
+			swphy4: swphy4@20 {
+				reg = <20>;
+			};
+		};
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* 10G SFP+ */
+&cp0_eth0 {
+	status = "okay";
+
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+/* Topaz switch uplink */
+&cp0_eth1 {
+	status = "okay";
+
+	phy-mode = "2500base-x";
+	phys = <&cp0_comphy0 1>;
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+/* 1G SFP or 1G RJ45 */
+&cp0_eth2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_rgmii1_pins>;
+
+	phy = <&eth2phy>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+/* SMSC USB5434B hub */
+&cp0_usb3_0 {
+	status = "okay";
+
+	phys = <&cp0_comphy1 0>, <&cp0_utmi0>;
+	phy-names = "cp0-usb3h0-comphy", "utmi";
+};
+
+/* miniPCI-E USB */
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* 7 + 12 SATA connector (J24) */
+	sata-port@0 {
+		phys = <&cp0_comphy2 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+
+	/* M.2-2250 B-key (J39) */
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+/* miniPCI-E (J5) */
+&cp0_pcie2 {
+	status = "okay";
+
+	pinctrl-names = "default", "clkreq";
+	pinctrl-0 = <&cp0_pcie_reset_pins>;
+	pinctrl-1 = <&cp0_pcie_clkreq_pins>;
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+	reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
new file mode 100644
index 000000000..2f440711d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-70x0.dtsi"
+
+/ {
+	model = "Marvell Armada 7040";
+	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
new file mode 100644
index 000000000..293403a1a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+/ {
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+};
+
+/*
+ * Instantiate the CP110
+ */
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,armada-7k-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13";
+			marvell,function = "nf";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
new file mode 100644
index 000000000..ba1307c0f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
+ * two CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+	model = "Marvell Armada 8020";
+	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+
+&cp0_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
new file mode 100644
index 000000000..412520202
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 SolidRun ltd.
+ * Based on Marvell MACCHIATOBin board
+ *
+ * Device Tree file for SolidRun's ClearFog GT 8K
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "SolidRun ClearFog GT 8K";
+	compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp1_eth1;
+		ethernet1 = &cp0_eth0;
+		ethernet2 = &cp1_eth2;
+	};
+
+	fan: pwm {
+		compatible = "pwm-fan";
+		/* 20% steps */
+		cooling-levels = <0 51 102 153 204 255>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_fan_pwm_pins>;
+		pwms = <&cp0_gpio2 16 40000>;
+	};
+
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	sfp_cp0_eth0: sfp-cp0-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cp0_led0_pins
+			     &cp0_led1_pins>;
+		pinctrl-names = "default";
+		/* No designated function for these LEDs at the moment */
+		led0 {
+			label = "clearfog-gt-8k:green:led0";
+			gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led1 {
+			label = "clearfog-gt-8k:green:led1";
+			gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear button */
+			label = "Rear Button";
+			gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button-1 {
+			/* The wps button */
+			label = "WPS Button";
+			gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&ap_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		ap_active: trip-active {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <4000>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&ap_active>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 4>;
+		};
+		map1 {
+			trip = <&ap_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp0_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		cp0_active0: trip-active0 {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active1: trip-active1 {
+			temperature = <45000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active2: trip-active2 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp0_active3: trip-active3 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&cp0_active0>;
+			cooling-device = <&fan 0 1>;
+		};
+		map1 {
+			trip = <&cp0_active1>;
+			cooling-device = <&fan 1 2>;
+		};
+		map2 {
+			trip = <&cp0_active2>;
+			cooling-device = <&fan 2 3>;
+		};
+		map3 {
+			trip = <&cp0_active3>;
+			cooling-device = <&fan 3 4>;
+		};
+		map4 {
+			trip = <&cp0_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&cp1_thermal_ic {
+	polling-delay = <1000>; /* milliseconds */
+	trips {
+		cp1_active0: trip-active0 {
+			temperature = <40000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active1: trip-active1 {
+			temperature = <45000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active2: trip-active2 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+		cp1_active3: trip-active3 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <2500>; /* millicelsius */
+			type = "active";
+		};
+	};
+	cooling-maps {
+		map0 {
+			trip = <&cp1_active0>;
+			cooling-device = <&fan 0 1>;
+		};
+		map1 {
+			trip = <&cp1_active1>;
+			cooling-device = <&fan 1 2>;
+		};
+		map2 {
+			trip = <&cp1_active2>;
+			cooling-device = <&fan 2 3>;
+		};
+		map3 {
+			trip = <&cp1_active3>;
+			cooling-device = <&fan 3 4>;
+		};
+		map4 {
+			trip = <&cp1_crit>;
+			cooling-device = <&fan 4 5>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	/*
+	 * MPP Bus:
+	 * [0-31] = 0xff: Keep default CP0_shared_pins:
+	 * [11] CLKOUT_MPP_11 (out)
+	 * [23] LINK_RD_IN_CP2CP (in)
+	 * [25] CLKOUT_MPP_25 (out)
+	 * [29] AVS_FB_IN_CP2CP (in)
+	 * [32, 33, 34] pci0/1/2 reset
+	 * [35-38] CP0 I2C1 and I2C0
+	 * [39] GPIO reset button
+	 * [40,41] LED0 and LED1
+	 * [43] 1512 phy reset
+	 * [47] USB VBUS EN (active low)
+	 * [48] FAN PWM
+	 * [49] SFP+ present signal
+	 * [50] TPM interrupt
+	 * [51] WLAN0 disable
+	 * [52] WLAN1 disable
+	 * [53] LTE disable
+	 * [54] NFC reset
+	 * [55] Micro SD card detect
+	 * [56-61] Micro SD
+	 */
+
+	cp0_pci0_reset_pins: pci0-reset-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	cp0_pci1_reset_pins: pci1-reset-pins {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	cp0_pci2_reset_pins: pci2-reset-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+
+	cp0_gpio_reset_pins: gpio-reset-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+
+	cp0_led0_pins: led0-pins {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	cp0_led1_pins: led1-pins {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	cp0_fan_pwm_pins: fan-pwm-pins {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	cp0_sfp_present_pins: sfp-present-pins {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+
+	cp0_tpm_irq_pins: tpm-irq-pins {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+
+	cp0_wlan_disable_pins: wlan-disable-pins {
+		marvell,pins = "mpp51";
+		marvell,function = "gpio";
+	};
+
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>;
+	reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	sata_reset {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	lte_reset {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
+	wlan_disable {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
+	lte_disable {
+		gpio-hog;
+		gpios = <21 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SFP */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	phys = <&cp0_comphy2 0>;
+	sfp = <&sfp_cp0_eth0>;
+};
+
+&cp0_sdhci0 {
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp1_pinctrl {
+	/*
+	 * MPP Bus:
+	 * [0-5] TDM
+	 * [6]   VHV Enable
+	 * [7]   CP1 SPI0 CSn1 (FXS)
+	 * [8]   CP1 SPI0 CSn0 (TPM)
+	 * [9.11]CP1 SPI0 MOSI/MISO/CLK
+	 * [13]  CP1 SPI1 MISO (TDM and SPI ROM shared)
+	 * [14]  CP1 SPI1 CS0n (64Mb SPI ROM)
+	 * [15]  CP1 SPI1 MOSI (TDM and SPI ROM shared)
+	 * [16]  CP1 SPI1 CLK (TDM and SPI ROM shared)
+	 * [24]  Topaz switch reset
+	 * [26]  Buzzer
+	 * [27]  CP1 SMI MDIO
+	 * [28]  CP1 SMI MDC
+	 * [29]  CP0 10G SFP TX Disable
+	 * [30]  WPS button
+	 * [31]  Front panel button
+	 */
+
+	cp1_spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+
+	cp1_switch_reset_pins: switch-reset-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	cp1_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp27", "mpp28";
+		marvell,function = "ge";
+	};
+
+	cp1_sfp_tx_disable_pins: sfp-tx-disable-pins {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	cp1_wps_button_pins: wps-button-pins {
+		marvell,pins = "mpp30";
+		marvell,function = "gpio";
+	};
+};
+
+&cp1_sata0 {
+	pinctrl-0 = <&cp0_pci1_reset_pins>;
+	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp1_comphy0 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
+};
+
+&cp1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_ge_mdio_pins>;
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		/* LED0 - GB link
+		 * LED1 - on: link, blink: activity
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
+		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+	};
+
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_switch_reset_pins>;
+		reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&cp1_eth2>;
+				phy-mode = "2500base-x";
+				managed = "in-band-status";
+			};
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* 1G copper */
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy = <&ge_phy>;
+	phys = <&cp1_comphy3 1>;
+};
+
+/* Switch uplink */
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "2500base-x";
+	phys = <&cp1_comphy5 2>;
+	managed = "in-band-status";
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&cp1_comphy2 {
+	cp1_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+};
+
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>;
+	phy-names = "cp1-usb3h0-comphy";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
new file mode 100644
index 000000000..92897bd7e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada 8040 Development board platform
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-8040.dtsi"
+
+/ {
+	model = "Marvell Armada 8040 DB board";
+	compatible = "marvell,armada8040-db", "marvell,armada8040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth2;
+		ethernet2 = &cp1_eth0;
+		ethernet3 = &cp1_eth1;
+		i2c1 = &cp0_i2c0;
+		i2c2 = &cp1_i2c0;
+	};
+
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-usb3h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
+	};
+
+	cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "cp1-usb3h0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp1_usb3_0_phy: cp1-usb3-0-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp1_reg_usb3_0_vbus>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xce0000>;
+			};
+		};
+	};
+};
+
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+/* CON6 on CP0 expansion */
+&cp0_pcie0 {
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
+	status = "okay";
+};
+
+/* CON5 on CP0 expansion */
+&cp0_pcie2 {
+	phys = <&cp0_comphy5 2>;
+	phy-names = "cp0-pcie2-x1-phy";
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/* U31 */
+	expander0: pca9555@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+	};
+
+	/* U25 */
+	expander1: pca9555@25 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x25>;
+	};
+
+};
+
+/* CON4 on CP0 expansion */
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp0_comphy1 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+/* CON9 on CP0 expansion */
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_comphy4 {
+	cp0_usbh1_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&cp0_reg_usb3_1_vbus>;
+	};
+};
+
+/* CON10 on CP0 expansion */
+&cp0_usb3_1 {
+	phys = <&cp0_comphy4 1>, <&cp0_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON6 on CP1 expansion */
+&cp1_pcie0 {
+	phys = <&cp1_comphy0 0>;
+	phy-names = "cp1-pcie0-x1-phy";
+	status = "okay";
+};
+
+/* CON7 on CP1 expansion */
+&cp1_pcie1 {
+	phys = <&cp1_comphy4 1>;
+	phy-names = "cp1-pcie1-x1-phy";
+	status = "okay";
+};
+
+/* CON5 on CP1 expansion */
+&cp1_pcie2 {
+	phys = <&cp1_comphy5 2>;
+	phy-names = "cp1-pcie2-x1-phy";
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp1_spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Boot";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "Filesystem";
+				reg = <0x200000 0xd00000>;
+			};
+			partition@f00000 {
+				label = "Boot_2nd";
+				reg = <0xf00000 0x100000>;
+			};
+		};
+	};
+};
+
+/*
+ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
+ * MDIO signal of CP1.
+ */
+&cp1_nand_controller {
+	pinctrl-0 = <&nand_pins>, <&nand_rb>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+/* CON4 on CP1 expansion */
+&cp1_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		phy-names = "cp1-sata0-0-phy";
+	};
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+/* CON9 on CP1 expansion */
+&cp1_usb3_0 {
+	usb-phy = <&cp1_usb3_0_phy>;
+	phys = <&cp1_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* CON10 on CP1 expansion */
+&cp1_usb3_1 {
+	phys = <&cp1_utmi1>;
+	phy-names = "utmi";
+	status = "okay";
+};
+
+&cp1_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+
+	fixed-link {
+		speed = <10000>;
+		full-duplex;
+	};
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&ap_sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	non-removable;
+};
+
+&cp0_sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
new file mode 100644
index 000000000..411d20064
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include <dt-bindings/leds/common.h>
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin Single-shot";
+	compatible = "marvell,armada8040-mcbin-singleshot",
+			"marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cp0_led18_pins>;
+		pinctrl-names = "default";
+
+		led18 {
+			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp_eth0>;
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	sfp = <&sfp_eth1>;
+};
+
+&cp0_pinctrl {
+	cp0_led18_pins: led18-pins {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
new file mode 100644
index 000000000..1766cf581
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040-mcbin.dtsi"
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin Double-shot";
+	compatible = "marvell,armada8040-mcbin-doubleshot",
+			"marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+};
+
+&cp0_xmdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+		sfp = <&sfp_eth0>;
+	};
+
+	phy8: ethernet-phy@8 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		sfp = <&sfp_eth1>;
+	};
+};
+
+&cp0_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy0>;
+	phy-mode = "10gbase-r";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	/* Network PHY */
+	phy = <&phy8>;
+	phy-mode = "10gbase-r";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
new file mode 100644
index 000000000..c864df9ec
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for MACCHIATOBin Armada 8040 community board platform
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell 8040 MACCHIATOBin";
+	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
+			"marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp1_eth1;
+		ethernet3 = &cp1_eth2;
+	};
+
+	/* Regulator labels correspond with schematics */
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_vddo_h: regulator-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_vddo_h";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	sfp_eth0: sfp-eth0 {
+		/* CON15,16 - CPM lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp0_i2c>;
+		los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp0_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_eth1: sfp-eth1 {
+		/* CON17,18 - CPS lane 4 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpp1_i2c>;
+		los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+
+	sfp_eth3: sfp-eth3 {
+		/* CON13,14 - CPS lane 5 */
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_1g_i2c>;
+		los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		sfpp1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		sfp_1g_i2c: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+	};
+};
+
+/* J25 UART header */
+&cp0_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart1_pins>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_ge_mdio_pins>;
+	status = "okay";
+
+	ge_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_pins>;
+	num-lanes = <4>;
+	num-viewport = <8>;
+	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>,
+	       <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy",
+		    "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy";
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cp0_uart1_pins: uart1-pins {
+		marvell,pins = "mpp40", "mpp41";
+		marvell,function = "uart1";
+	};
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cp0_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp51", "mpp53", "mpp54";
+		marvell,function = "gpio";
+	};
+	cp0_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+	cp0_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* CPM Lane 5 - U29 */
+	sata-port@1 {
+		phys = <&cp0_comphy5 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+&cp0_sdhci0 {
+	/* U6 */
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	/* J38? - USB2.0 only */
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+};
+
+&cp1_eth1 {
+	/* CPS Lane 0 - J5 (Gigabit RJ45) */
+	status = "okay";
+	/* Network PHY */
+	phy = <&ge_phy>;
+	phy-mode = "sgmii";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 1>;
+};
+
+&cp1_eth2 {
+	/* CPS Lane 5 */
+	status = "okay";
+	/* Network PHY */
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy5 2>;
+	sfp = <&sfp_eth3>;
+};
+
+&cp1_pinctrl {
+	cp1_sfpp1_pins: sfpp1-pins {
+		marvell,pins = "mpp8", "mpp10", "mpp11";
+		marvell,function = "gpio";
+	};
+	cp1_spi1_pins: spi1-pins {
+		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "spi1";
+	};
+	cp1_uart0_pins: uart0-pins {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "uart0";
+	};
+	cp1_sfp_1g_pins: sfp-1g-pins {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+	cp1_sfpp0_pins: sfpp0-pins {
+		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+};
+
+/* J27 UART header */
+&cp1_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_uart0_pins>;
+	status = "okay";
+};
+
+&cp1_sata0 {
+	status = "okay";
+
+	/* CPS Lane 1 - U32 */
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		phy-names = "cp1-sata0-0-phy";
+	};
+
+	/* CPS Lane 3 - U31 */
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
+};
+
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&cp1_comphy2 {
+	cp1_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+};
+
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp1_usb3_0 {
+	/* CPS Lane 2 - CON7 */
+	phys = <&cp1_comphy2 0>, <&cp1_utmi0>;
+	phy-names = "cp1-usb3h0-comphy", "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
new file mode 100644
index 000000000..42a60f3dd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -0,0 +1,523 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Device Tree file for IEI Puzzle-M801
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "IEI-Puzzle-M801";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	aliases {
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp1_eth0;
+		ethernet2 = &cp0_eth1;
+		ethernet3 = &cp0_eth2;
+		ethernet4 = &cp1_eth1;
+		ethernet5 = &cp1_eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	/* Regulator labels correspond with schematics */
+	v_3_3: regulator-3-3v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_3_3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp0_xhci_vbus_pins>;
+		regulator-name = "v_5v0_usb3_hst_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
+	v_vddo_h: regulator-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "v_vddo_h";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		status = "okay";
+	};
+
+	sfp_cp0_eth0: sfp-cp0-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpplus0_i2c>;
+		los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+
+	sfp_cp1_eth0: sfp-cp1-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfpplus1_i2c>;
+		los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+		pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			/* SFP+ port 2: Activity */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <0>;
+			gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* SFP+ port 1: Activity */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* SFP+ port 2: 10 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* SFP+ port 2: 1 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <3>;
+			gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* SFP+ port 1: 10 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <4>;
+			gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* SFP+ port 1: 1 Gbps indicator */
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <5>;
+			gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			linux,default-trigger = "disk-activity";
+			gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+};
+
+&ap_sdhci0 {
+	bus-width = <8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so add
+	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
+	 */
+	marvell,xenon-phy-slow-mode;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+	vqmmc-supply = <&v_vddo_h>;
+};
+
+&ap_thermal_cpu1 {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <44000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+	cooling-maps {
+		fan-map {
+			trip = <&cpu_active>;
+			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>,
+					<&chassis_fan_group1 64 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		reg = <0x32>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+		partition@u-boot {
+			label = "u-boot";
+			reg = <0x00000000 0x001f0000>;
+		};
+		partition@u-boot-env {
+			label = "u-boot-env";
+			reg = <0x001f0000 0x00010000>;
+		};
+		partition@ubi1 {
+			label = "ubi1";
+			reg = <0x00200000 0x03f00000>;
+		};
+		partition@ubi2 {
+			label = "ubi2";
+			reg = <0x04100000 0x03f00000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	status = "okay";
+	/* IEI WT61P803 PUZZLE MCU Controller */
+	mcu {
+		compatible = "iei,wt61p803-puzzle";
+		current-speed = <115200>;
+		enable-beep;
+
+		leds {
+			compatible = "iei,wt61p803-puzzle-leds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				function = LED_FUNCTION_POWER;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+
+		hwmon {
+			compatible = "iei,wt61p803-puzzle-hwmon";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			chassis_fan_group0:fan-group@0 {
+				#cooling-cells = <2>;
+				reg = <0x00>;
+				cooling-levels = <64 102 170 230 250>;
+			};
+
+			chassis_fan_group1:fan-group@1 {
+				#cooling-cells = <2>;
+				reg = <0x01>;
+				cooling-levels = <64 102 170 230 250>;
+			};
+		};
+	};
+};
+
+&cp0_rtc {
+	status = "disabled";
+};
+
+&cp0_i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+
+	sfpplus_gpio: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c04";
+		reg = <0x54>;
+	};
+};
+
+&cp0_i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		sfpplus0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		sfpplus1_i2c: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&cp0_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_uart1_pins>;
+	status = "okay";
+};
+
+&cp0_mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	ge_phy2: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ge_phy3: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_pcie_pins>;
+	num-lanes = <1>;
+	num-viewport = <8>;
+	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
+	phys = <&cp0_comphy0 0>;
+	phy-names = "cp0-pcie0-x1-phy";
+	status = "okay";
+};
+
+&cp0_pinctrl {
+	cp0_ge_mdio_pins: ge-mdio-pins {
+		marvell,pins = "mpp32", "mpp34";
+		marvell,function = "ge";
+	};
+	cp0_i2c1_pins: i2c1-pins {
+		marvell,pins = "mpp35", "mpp36";
+		marvell,function = "i2c1";
+	};
+	cp0_i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp37", "mpp38";
+		marvell,function = "i2c0";
+	};
+	cp0_uart1_pins: uart1-pins {
+		marvell,pins = "mpp40", "mpp41";
+		marvell,function = "uart1";
+	};
+	cp0_xhci_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+	cp0_pcie_pins: pcie-pins {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+	cp0_sdhci_pins: sdhci-pins {
+		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+			       "mpp60", "mpp61";
+		marvell,function = "sdio";
+	};
+	cp0_sfpplus_led_pins: sfpplus-led-pins {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	phys = <&cp0_comphy4 0>;
+	local-mac-address = [ae 00 00 00 ff 00];
+	sfp = <&sfp_cp0_eth0>;
+	managed = "in-band-status";
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&ge_phy2>;
+	phy-mode = "sgmii";
+	local-mac-address = [ae 00 00 00 ff 01];
+	phys = <&cp0_comphy3 1>;
+};
+
+&cp0_eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phys = <&cp0_comphy1 2>;
+	local-mac-address = [ae 00 00 00 ff 02];
+	phy = <&ge_phy3>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp0_comphy2 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+
+	sata-port@1 {
+		phys = <&cp0_comphy5 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
+};
+
+&cp0_sdhci0 {
+	broken-cd;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	status = "okay";
+	vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&cp1_i2c1 {
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&cp1_rtc {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	phys = <&cp1_comphy4 0>;
+	local-mac-address = [ae 00 00 00 ff 03];
+	sfp = <&sfp_cp1_eth0>;
+	managed = "in-band-status";
+};
+
+&cp1_eth1 {
+	status = "okay";
+	phy = <&ge_phy4>;
+	phy-mode = "sgmii";
+	local-mac-address = [ae 00 00 00 ff 04];
+	phys = <&cp1_comphy3 1>;
+};
+
+&cp1_eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	local-mac-address = [ae 00 00 00 ff 05];
+	phys = <&cp1_comphy5 2>;
+	phy = <&ge_phy5>;
+};
+
+&cp1_pinctrl {
+	cp1_sfpplus_led_pins: sfpplus-led-pins {
+		marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31";
+		marvell,function = "gpio";
+	};
+};
+
+&cp1_uart0 {
+	status = "disabled";
+};
+
+&cp1_comphy2 {
+	cp1_usbh0_con: connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&v_5v0_usb3_hst_vbus>;
+	};
+};
+
+&cp1_usb3_0 {
+	phys = <&cp1_comphy2 0>;
+	phy-names = "cp1-usb3h0-comphy";
+	status = "okay";
+};
+
+&cp1_mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	ge_phy4: ethernet-phy@1 {
+		reg = <1>;
+	};
+	ge_phy5: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cp1_pcie0 {
+	num-lanes = <2>;
+	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
new file mode 100644
index 000000000..22c2d6ebf
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+#include "armada-80x0.dtsi"
+
+/ {
+	model = "Marvell Armada 8040";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
+ * in CP master is not connected (by package) to the oscillator. So
+ * disable it. However, the RTC clock in CP slave is connected to the
+ * oscillator so this one is let enabled.
+ */
+&cp0_rtc {
+	status = "disabled";
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+	iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+	iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+	iommus = <&smmu 0x451>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
new file mode 100644
index 000000000..4ba158f41
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada-8080 Development board platform
+ */
+
+#include "armada-8080.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080-db", "marvell,armada-8080",
+		     "marvell,armada-ap810-octa", "marvell,armada-ap810";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart0_ap0 {
+	clock-frequency = <384000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
new file mode 100644
index 000000000..299e814d1
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA.
+ */
+
+#include "armada-ap810-ap0-octa-core.dtsi"
+
+/ {
+	model = "Marvell 8080 board";
+	compatible = "marvell,armada-8080", "marvell,armada-ap810-octa",
+				"marvell,armada-ap810";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
new file mode 100644
index 000000000..ee67c70bf
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+/ {
+	aliases {
+		gpio1 = &cp1_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+		spi3 = &cp1_spi0;
+		spi4 = &cp1_spi1;
+	};
+};
+
+/*
+ * Instantiate the master CP110
+ */
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/*
+ * Instantiate the slave CP110
+ */
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp110.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cpm-pinctrl";
+	};
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,armada-8k-cps-pinctrl";
+
+		nand_pins: nand-pins {
+			marvell,pins =
+			"mpp0", "mpp1", "mpp2", "mpp3",
+			"mpp4", "mpp5", "mpp6", "mpp7",
+			"mpp8", "mpp9", "mpp10", "mpp11",
+			"mpp15", "mpp16", "mpp17", "mpp18",
+			"mpp19", "mpp20", "mpp21", "mpp22",
+			"mpp23", "mpp24", "mpp25", "mpp26",
+			"mpp27";
+			marvell,function = "dev";
+		};
+
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13", "mpp12";
+			marvell,function = "nf";
+		};
+	};
+};
+
+&cp1_crypto {
+	/*
+	 * The cryptographic engine found on the cp110
+	 * master is enabled by default at the SoC
+	 * level. Because it is not possible as of now
+	 * to enable two cryptographic engines in
+	 * parallel, disable this one by default.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
new file mode 100644
index 000000000..3ed6fba1f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Dual";
+	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	thermal-zones {
+		/delete-node/ ap-thermal-cpu2;
+		/delete-node/ ap-thermal-cpu3;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
new file mode 100644
index 000000000..cf6a96ddc
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
new file mode 100644
index 000000000..866628679
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#define AP_NAME		ap806
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP806";
+	compatible = "marvell,armada-ap806";
+};
+
+&ap_syscon0 {
+	ap_clk: clock {
+		compatible = "marvell,ap806-clock";
+		#clock-cells = <1>;
+	};
+};
+
+&ap_syscon1 {
+	cpu_clk: clock-cpu@278 {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+		reg = <0x278 0xa30>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
new file mode 100644
index 000000000..8848238f9
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807 Quad
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#include "armada-ap807.dtsi"
+
+/ {
+	model = "Marvell Armada AP807 Quad";
+	compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 0>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpu_clk 1>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
new file mode 100644
index 000000000..4a23f65d4
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada AP807
+ *
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ */
+
+#define AP_NAME		ap807
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP807";
+	compatible = "marvell,armada-ap807";
+};
+
+&ap_syscon0 {
+	ap_clk: clock {
+		compatible = "marvell,ap807-clock";
+		#clock-cells = <1>;
+	};
+};
+
+&ap_syscon1 {
+	cpu_clk: clock-cpu {
+		compatible = "marvell,ap807-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+	};
+};
+
+&ap_sdhci0 {
+	compatible = "marvell,armada-ap807-sdhci",
+		     "marvell,armada-ap806-sdhci"; /* Backward compatibility */
+};
+
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
new file mode 100644
index 000000000..2c920e22c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP80x.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		gpio0 = &ap_gpio;
+		spi0 = &spi0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * This area matches the mapping done with a
+		 * mainline U-Boot, and should be updated by the
+		 * bootloader.
+		 */
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tee@4400000 {
+			reg = <0 0x4400000 0 0x1000000>;
+			no-map;
+		};
+	};
+
+	AP_NAME {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@f0000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			smmu: iommu@5000000 {
+				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+				reg = <0x100000 0x100000>;
+				dma-coherent;
+				#iommu-cells = <1>;
+				#global-interrupts = <1>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			};
+
+			pmu {
+				compatible = "arm,cortex-a72-pmu";
+				interrupt-parent = <&pic>;
+				interrupts = <17>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			gicp: gicp@3f0040 {
+				compatible = "marvell,ap806-gicp";
+				reg = <0x3f0040 0x10>;
+				marvell,spi-ranges = <64 64>, <288 64>;
+				msi-controller;
+			};
+
+			pic: interrupt-controller@3f0100 {
+				compatible = "marvell,armada-8k-pic";
+				reg = <0x3f0100 0x10>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sei: interrupt-controller@3f0200 {
+				compatible = "marvell,ap806-sei";
+				reg = <0x3f0200 0x40>;
+				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				clocks = <&ap_clk 3>;
+				dma-coherent;
+			};
+
+			spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@511000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+			};
+
+			uart1: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_clk 3>;
+				status = "disabled";
+
+			};
+
+			watchdog: watchdog@610000 {
+				compatible = "arm,sbsa-gwdt";
+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_sdhci0: mmc@6e0000 {
+				compatible = "marvell,armada-ap806-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "core";
+				clocks = <&ap_clk 4>;
+				dma-coherent;
+				marvell,xenon-phy-slow-mode;
+				status = "disabled";
+			};
+
+			ap_syscon0: system-controller@6f4000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f4000 0x2000>;
+
+				ap_pinctrl: pinctrl {
+					compatible = "marvell,ap806-pinctrl";
+
+					uart0_pins: uart0-pins {
+						marvell,pins = "mpp11", "mpp19";
+						marvell,function = "uart0";
+					};
+				};
+
+				ap_gpio: gpio@1040 {
+					compatible = "marvell,armada-8k-gpio";
+					offset = <0x1040>;
+					ngpios = <20>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&ap_pinctrl 0 0 20>;
+					marvell,pwm-offset = <0x10c0>;
+					#pwm-cells = <2>;
+					clocks = <&ap_clk 3>;
+				};
+			};
+
+			ap_syscon1: system-controller@6f8000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f8000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				ap_thermal: thermal-sensor@80 {
+					compatible = "marvell,armada-ap806-thermal";
+					reg = <0x80 0x10>;
+					interrupt-parent = <&sei>;
+					interrupts = <18>;
+					#thermal-sensor-cells = <1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The thermal IP features one internal sensor plus, if applicable, one
+	 * remote channel wired to one sensor per CPU.
+	 *
+	 * Only one thermal zone per AP/CP may trigger interrupts at a time, the
+	 * first one that will have a critical trip point will be chosen.
+	 */
+	thermal-zones {
+		ap_thermal_ic: ap-ic-thermal {
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
+
+			thermal-sensors = <&ap_thermal 0>;
+
+			trips {
+				ap_crit: ap-crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
+			cooling-maps { };
+		};
+
+		ap_thermal_cpu0: ap-cpu0-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 1>;
+
+			trips {
+				cpu0_hot: cpu0-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_emerg: cpu0-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0_hot: map0-hot {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 1 2>,
+						<&cpu1 1 2>;
+				};
+				map0_emerg: map0-ermerg {
+					trip = <&cpu0_emerg>;
+					cooling-device = <&cpu0 3 3>,
+						<&cpu1 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu1: ap-cpu1-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 2>;
+
+			trips {
+				cpu1_hot: cpu1-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_emerg: cpu1-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map1_hot: map1-hot {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu0 1 2>,
+						<&cpu1 1 2>;
+				};
+				map1_emerg: map1-emerg {
+					trip = <&cpu1_emerg>;
+					cooling-device = <&cpu0 3 3>,
+						<&cpu1 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu2: ap-cpu2-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 3>;
+
+			trips {
+				cpu2_hot: cpu2-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_emerg: cpu2-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map2_hot: map2-hot {
+					trip = <&cpu2_hot>;
+					cooling-device = <&cpu2 1 2>,
+						<&cpu3 1 2>;
+				};
+				map2_emerg: map2-emerg {
+					trip = <&cpu2_emerg>;
+					cooling-device = <&cpu2 3 3>,
+						<&cpu3 3 3>;
+				};
+			};
+		};
+
+		ap_thermal_cpu3: ap-cpu3-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&ap_thermal 4>;
+
+			trips {
+				cpu3_hot: cpu3-hot {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_emerg: cpu3-emerg {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map3_hot: map3-bhot {
+					trip = <&cpu3_hot>;
+					cooling-device = <&cpu2 1 2>,
+						<&cpu3 1 2>;
+				};
+				map3_emerg: map3-emerg {
+					trip = <&cpu3_emerg>;
+					cooling-device = <&cpu2 3 3>,
+						<&cpu3 3 3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
new file mode 100644
index 000000000..d1a7143ef
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP810 OCTA cores.
+ */
+
+#include "armada-ap810-ap0.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "marvell,armada-ap810-octa";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+		cpu5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+		cpu6: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			enable-method = "psci";
+		};
+		cpu7: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
new file mode 100644
index 000000000..2f9ab6b4a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada AP810.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP810";
+	compatible = "marvell,armada-ap810";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0_ap0;
+		serial1 = &uart1_ap0;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	ap810-ap0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space@e8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xe8000000 0x4000000>;
+			interrupt-parent = <&gic>;
+
+			gic: interrupt-controller@3000000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+
+				reg = <0x3000000 0x10000>,	/* GICD */
+				      <0x3060000 0x100000>,	/* GICR */
+				      <0x00c0000 0x2000>,	/* GICC */
+				      <0x00d0000 0x1000>,	/* GICH */
+				      <0x00e0000 0x2000>;	/* GICV */
+
+				gic_its_ap0: msi-controller@3040000 {
+					compatible = "arm,gic-v3-its";
+					msi-controller;
+					#msi-cells = <1>;
+					reg = <0x3040000 0x20000>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+					     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			xor@400000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa0>;
+				dma-coherent;
+			};
+
+			xor@420000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa1>;
+				dma-coherent;
+			};
+
+			xor@440000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa2>;
+				dma-coherent;
+			};
+
+			xor@460000 {
+				compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_its_ap0 0xa3>;
+				dma-coherent;
+			};
+
+			uart0_ap0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+
+			uart1_ap0: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi
new file mode 100644
index 000000000..c04c6c475
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ */
+
+/* Common definitions used by Armada 7K/8K DTs */
+#define PASTER(x, y) x ## y
+#define EVALUATOR(x, y) PASTER(x, y)
+#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name))
+#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name))
+#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
new file mode 100644
index 000000000..4fd33b0fa
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP110.
+ */
+
+#define CP11X_TYPE cp110
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
new file mode 100644
index 000000000..1d0a9653e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP115.
+ */
+
+#define CP11X_TYPE cp115
+
+#include "armada-cp11x.dtsi"
+
+#undef CP11X_TYPE
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
new file mode 100644
index 000000000..4ec1aae0a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * Device Tree file for Marvell Armada CP11x.
+ */
+
+#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "armada-common.dtsi"
+
+#define CP11X_PCIEx_CONF_BASE(iface)	(CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface))
+
+/ {
+	/*
+	 * The contents of the node are defined below, in order to
+	 * save one indentation level
+	 */
+	CP11X_NAME: CP11X_NAME { };
+
+	/*
+	 * CPs only have one sensor in the thermal IC.
+	 *
+	 * The cooling maps are empty as there are no cooling devices.
+	 */
+	thermal-zones {
+		CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(ic-thermal) {
+			polling-delay-passive = <0>; /* Interrupt driven */
+			polling-delay = <0>; /* Interrupt driven */
+
+			thermal-sensors = <&CP11X_LABEL(thermal) 0>;
+
+			trips {
+				CP11X_LABEL(crit): crit {
+					temperature = <100000>; /* mC degrees */
+					hysteresis = <2000>; /* mC degrees */
+					type = "critical";
+				};
+			};
+
+			cooling-maps { };
+		};
+	};
+};
+
+&CP11X_NAME {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "simple-bus";
+	interrupt-parent = <&CP11X_LABEL(icu_nsr)>;
+	ranges;
+
+	config-space@CP11X_BASE {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>;
+
+		CP11X_LABEL(ethernet): ethernet@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,armada-7k-pp22";
+			reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+			clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>,
+				 <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+				 <&CP11X_LABEL(clk) 1 18>;
+			clock-names = "pp_clk", "gop_clk",
+				      "mg_clk", "mg_core_clk", "axi_clk";
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			status = "disabled";
+			dma-coherent;
+
+			CP11X_LABEL(eth0): ethernet-port@0 {
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+					<43 IRQ_TYPE_LEVEL_HIGH>,
+					<47 IRQ_TYPE_LEVEL_HIGH>,
+					<51 IRQ_TYPE_LEVEL_HIGH>,
+					<55 IRQ_TYPE_LEVEL_HIGH>,
+					<59 IRQ_TYPE_LEVEL_HIGH>,
+					<63 IRQ_TYPE_LEVEL_HIGH>,
+					<67 IRQ_TYPE_LEVEL_HIGH>,
+					<71 IRQ_TYPE_LEVEL_HIGH>,
+					<129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				reg = <0>;
+				port-id = <0>; /* For backward compatibility. */
+				gop-port-id = <0>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(eth1): ethernet-port@1 {
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+					<44 IRQ_TYPE_LEVEL_HIGH>,
+					<48 IRQ_TYPE_LEVEL_HIGH>,
+					<52 IRQ_TYPE_LEVEL_HIGH>,
+					<56 IRQ_TYPE_LEVEL_HIGH>,
+					<60 IRQ_TYPE_LEVEL_HIGH>,
+					<64 IRQ_TYPE_LEVEL_HIGH>,
+					<68 IRQ_TYPE_LEVEL_HIGH>,
+					<72 IRQ_TYPE_LEVEL_HIGH>,
+					<128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				reg = <1>;
+				port-id = <1>; /* For backward compatibility. */
+				gop-port-id = <2>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(eth2): ethernet-port@2 {
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+					<45 IRQ_TYPE_LEVEL_HIGH>,
+					<49 IRQ_TYPE_LEVEL_HIGH>,
+					<53 IRQ_TYPE_LEVEL_HIGH>,
+					<57 IRQ_TYPE_LEVEL_HIGH>,
+					<61 IRQ_TYPE_LEVEL_HIGH>,
+					<65 IRQ_TYPE_LEVEL_HIGH>,
+					<69 IRQ_TYPE_LEVEL_HIGH>,
+					<73 IRQ_TYPE_LEVEL_HIGH>,
+					<127 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "hif0", "hif1", "hif2",
+					"hif3", "hif4", "hif5", "hif6", "hif7",
+					"hif8", "link";
+				reg = <2>;
+				port-id = <2>; /* For backward compatibility. */
+				gop-port-id = <3>;
+				status = "disabled";
+			};
+		};
+
+		CP11X_LABEL(comphy): phy@120000 {
+			compatible = "marvell,comphy-cp110";
+			reg = <0x120000 0x6000>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>,
+				 <&CP11X_LABEL(clk) 1 18>;
+			clock-names = "mg_clk", "mg_core_clk", "axi_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			CP11X_LABEL(comphy0): phy@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy1): phy@1 {
+				reg = <1>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy2): phy@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy3): phy@3 {
+				reg = <3>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy4): phy@4 {
+				reg = <4>;
+				#phy-cells = <1>;
+			};
+
+			CP11X_LABEL(comphy5): phy@5 {
+				reg = <5>;
+				#phy-cells = <1>;
+			};
+		};
+
+		CP11X_LABEL(mdio): mdio@12a200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,orion-mdio";
+			reg = <0x12a200 0x10>;
+			clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>,
+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(xmdio): mdio@12a600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,xmdio";
+			reg = <0x12a600 0x10>;
+			clocks = <&CP11X_LABEL(clk) 1 5>,
+				 <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(icu): interrupt-controller@1e0000 {
+			compatible = "marvell,cp110-icu";
+			reg = <0x1e0000 0x440>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
+				compatible = "marvell,cp110-icu-nsr";
+				reg = <0x10 0x20>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				msi-parent = <&gicp>;
+			};
+
+			CP11X_LABEL(icu_sei): interrupt-controller@50 {
+				compatible = "marvell,cp110-icu-sei";
+				reg = <0x50 0x10>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				msi-parent = <&sei>;
+			};
+		};
+
+		CP11X_LABEL(rtc): rtc@284000 {
+			compatible = "marvell,armada-8k-rtc";
+			reg = <0x284000 0x20>, <0x284080 0x24>;
+			reg-names = "rtc", "rtc-soc";
+			interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		CP11X_LABEL(syscon0): system-controller@440000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x440000 0x2000>;
+
+			CP11X_LABEL(clk): clock {
+				compatible = "marvell,cp110-clock";
+				#clock-cells = <2>;
+			};
+
+			CP11X_LABEL(gpio1): gpio@100 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x100>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+				marvell,pwm-offset = <0x1f0>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+					<85 IRQ_TYPE_LEVEL_HIGH>,
+					<84 IRQ_TYPE_LEVEL_HIGH>,
+					<83 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				clock-names = "core", "axi";
+				clocks = <&CP11X_LABEL(clk) 1 21>,
+					 <&CP11X_LABEL(clk) 1 17>;
+				status = "disabled";
+			};
+
+			CP11X_LABEL(gpio2): gpio@140 {
+				compatible = "marvell,armada-8k-gpio";
+				offset = <0x140>;
+				ngpios = <31>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+				marvell,pwm-offset = <0x1f0>;
+				#pwm-cells = <2>;
+				interrupt-controller;
+				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+					<81 IRQ_TYPE_LEVEL_HIGH>,
+					<80 IRQ_TYPE_LEVEL_HIGH>,
+					<79 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <2>;
+				clock-names = "core", "axi";
+				clocks = <&CP11X_LABEL(clk) 1 21>,
+					 <&CP11X_LABEL(clk) 1 17>;
+				status = "disabled";
+			};
+		};
+
+		CP11X_LABEL(syscon1): system-controller@400000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP11X_LABEL(thermal): thermal-sensor@70 {
+				compatible = "marvell,armada-cp110-thermal";
+				reg = <0x70 0x10>;
+				interrupts-extended =
+					<&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+
+		CP11X_LABEL(utmi): utmi@580000 {
+			compatible = "marvell,cp110-utmi-phy";
+			reg = <0x580000 0x2000>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			CP11X_LABEL(utmi0): usb-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			CP11X_LABEL(utmi1): usb-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		CP11X_LABEL(usb3_0): usb@500000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x500000 0x4000>;
+			dma-coherent;
+			interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 22>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(usb3_1): usb@510000 {
+			compatible = "marvell,armada-8k-xhci",
+			"generic-xhci";
+			reg = <0x510000 0x4000>;
+			dma-coherent;
+			interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 23>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(sata0): sata@540000 {
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
+			reg = <0x540000 0x30000>;
+			dma-coherent;
+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&CP11X_LABEL(clk) 1 15>,
+				 <&CP11X_LABEL(clk) 1 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata-port@0 {
+				reg = <0>;
+			};
+
+			sata-port@1 {
+				reg = <1>;
+			};
+		};
+
+		CP11X_LABEL(xor0): xor@6a0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 8>,
+				 <&CP11X_LABEL(clk) 1 14>;
+		};
+
+		CP11X_LABEL(xor1): xor@6c0000 {
+			compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+			reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>;
+			dma-coherent;
+			msi-parent = <&gic_v2m0>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 7>,
+				 <&CP11X_LABEL(clk) 1 14>;
+		};
+
+		CP11X_LABEL(spi0): spi@700600 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700600 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(spi1): spi@700680 {
+			compatible = "marvell,armada-380-spi";
+			reg = <0x700680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(i2c0): i2c@701000 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(i2c1): i2c@701100 {
+			compatible = "marvell,mv78230-i2c";
+			reg = <0x701100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart0): serial@702000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702000 0x100>;
+			reg-shift = <2>;
+			interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart1): serial@702100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702100 0x100>;
+			reg-shift = <2>;
+			interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart2): serial@702200 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702200 0x100>;
+			reg-shift = <2>;
+			interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(uart3): serial@702300 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x702300 0x100>;
+			reg-shift = <2>;
+			interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+			reg-io-width = <1>;
+			clock-names = "baudclk", "apb_pclk";
+			clocks = <&CP11X_LABEL(clk) 1 21>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(nand_controller): nand-controller@720000 {
+			/*
+			 * Due to the limitation of the pins available
+			 * this controller is only usable on the CPM
+			 * for A7K and on the CPS for A8K.
+			 */
+			compatible = "marvell,armada-8k-nand-controller",
+				"marvell,armada370-nand-controller";
+			reg = <0x720000 0x54>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 2>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			marvell,system-controller = <&CP11X_LABEL(syscon0)>;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(trng): trng@760000 {
+			compatible = "marvell,armada-8k-rng",
+			"inside-secure,safexcel-eip76";
+			reg = <0x760000 0x7d>;
+			interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 25>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			status = "okay";
+		};
+
+		CP11X_LABEL(sdhci0): mmc@780000 {
+			compatible = "marvell,armada-cp110-sdhci";
+			reg = <0x780000 0x300>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "axi";
+			clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		CP11X_LABEL(crypto): crypto@800000 {
+			compatible = "inside-secure,safexcel-eip197b";
+			reg = <0x800000 0x200000>;
+			interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+				<88 IRQ_TYPE_LEVEL_HIGH>,
+				<89 IRQ_TYPE_LEVEL_HIGH>,
+				<90 IRQ_TYPE_LEVEL_HIGH>,
+				<91 IRQ_TYPE_LEVEL_HIGH>,
+				<92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mem", "ring0", "ring1",
+				"ring2", "ring3", "eip";
+			clock-names = "core", "reg";
+			clocks = <&CP11X_LABEL(clk) 1 26>,
+				 <&CP11X_LABEL(clk) 1 17>;
+			dma-coherent;
+		};
+	};
+
+	CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0  CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0  CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+
+	CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>,
+		      <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+		msi-parent = <&gic_v2m0>;
+
+		bus-range = <0 0xff>;
+		/* non-prefetchable memory */
+		ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0  CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+
+		num-lanes = <1>;
+		clock-names = "core", "reg";
+		clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
new file mode 100644
index 000000000..a7b6dfba8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-CRB-A";
+};
+
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <4>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0
+		&cp0_comphy1 0
+		&cp0_comphy2 0
+		&cp0_comphy3 0>;
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
new file mode 100644
index 000000000..0904cb030
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130-crb.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-CRB-B";
+};
+
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0>;
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+	sata-port@0 {
+		status = "okay";
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp0_comphy2 0>;
+	};
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phy-names = "usb";
+	phys = <&cp0_comphy1 0>;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phy-names = "usb";
+	phys = <&cp0_comphy3 1>;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
new file mode 100644
index 000000000..47d45ff3d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap0_reg_mmc_vccq: ap0_mmc_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "ap0_mmc_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy0: cp0_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus1>;
+	};
+
+	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&cp0_gpio2 18 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0_sd_vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_i2c1>;
+		mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
+		los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC U6 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	status = "okay";
+	mmc-ddr-1_8v;
+	vqmmc-supply = <&ap0_reg_mmc_vccq>;
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_sdhci_cd_pins_crb: cp0-sdhci-cd-pins-crb {
+			marvell,pins = "mpp55";
+			marvell,function = "gpio";
+		};
+		cp0_sdhci_pins: cp0-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+		cp0_spi1_pins: cp0-spi-pins-1 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+	};
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	expander0: mcp23x17@20 {
+		compatible = "microchip,mcp23017";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+		status = "okay";
+	};
+};
+
+&cp0_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins
+		     &cp0_sdhci_cd_pins_crb>;
+	bus-width = <4>;
+	cd-gpios = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>;
+	vqmmc-supply = <&cp0_reg_sd_vccq>;
+	vmmc-supply = <&cp0_reg_sd_vcc>;
+	status = "okay";
+};
+
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>;	/* CS0 */
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	switch6: switch0@6 {
+		/* Actual device is MV88E6393X */
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <6>;
+		interrupt-parent = <&cp0_gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "p1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "p2";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "p3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "p4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "p5";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "p6";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "p7";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "p8";
+				phy-handle = <&switch0phy8>;
+			};
+
+			port@9 {
+				reg = <9>;
+				label = "p9";
+				phy-mode = "10gbase-r";
+				sfp = <&sfp>;
+				managed = "in-band-status";
+			};
+
+			port@a {
+				reg = <10>;
+				ethernet = <&cp0_eth0>;
+				phy-mode = "10gbase-r";
+				managed = "in-band-status";
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+	};
+};
+
+&cp0_xmdio {
+	status = "okay";
+	nbaset_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <0>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+&cp0_eth0 {
+	/* This port is connected to 88E6393X switch */
+	status = "okay";
+	phy-mode = "10gbase-r";
+	managed = "in-band-status";
+	phys = <&cp0_comphy4 0>;
+};
+
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+	/* This port uses "2500base-t" phy-mode */
+	status = "disabled";
+	phy = <&nbaset_phy0>;
+	phys = <&cp0_comphy5 2>;
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-B.dts b/arch/arm64/boot/dts/marvell/cn9130-db-B.dts
new file mode 100644
index 000000000..57e41cacd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-B.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board (setup "B").
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts
new file mode 100644
index 000000000..994f347f2
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130-DB setup A";
+};
+
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
+
+&cp0_spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
new file mode 100644
index 000000000..6eb6a175d
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB board.
+ */
+
+#include "cn9130.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		i2c0 = &cp0_i2c0;
+		ethernet0 = &cp0_eth0;
+		ethernet1 = &cp0_eth1;
+		ethernet2 = &cp0_eth2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap0_reg_sd_vccq: ap0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "ap0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1 3300000 0x0>;
+	};
+
+	cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy0: cp0_usb3_phy@0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus0>;
+	};
+
+	cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp0_usb3_0_phy1: cp0_usb3_phy@1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp0_reg_usb3_vbus1>;
+	};
+
+	cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp0_sd_vccq";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+	};
+
+	cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp0_sd_vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	cp0_sfp_eth0: sfp-eth@0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp0_sfpp0_i2c>;
+		los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	bus-width = <8>;
+	vqmmc-supply = <&ap0_reg_sd_vccq>;
+	status = "okay";
+};
+
+&cp0_crypto {
+	status = "disabled";
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp0_sfp_eth0>;
+};
+
+/* CON56 */
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
+
+&cp0_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	clock-frequency = <100000>;
+
+	/* U36 */
+	expander0: pca953x@21 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x21>;
+		status = "okay";
+	};
+
+	/* U42 */
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <0x20>;
+	};
+
+	/* U38 */
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <0x20>;
+	};
+};
+
+&cp0_i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 { /* verify address - depends on dpr */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp0_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp0_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+
+		};
+	};
+};
+
+&cp0_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+/* U54 */
+&cp0_nand_controller {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins &nand_rb>;
+
+	nand@0 {
+		reg = <0>;
+		label = "main-storage";
+		nand-rb = <0>;
+		nand-ecc-mode = "hw";
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x200000>;
+			};
+			partition@200000 {
+				label = "Linux";
+				reg = <0x200000 0xe00000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	status = "okay";
+	num-lanes = <4>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp0_comphy0 0
+		&cp0_comphy1 0
+		&cp0_comphy2 0
+		&cp0_comphy3 0>;
+};
+
+&cp0_sata0 {
+	status = "okay";
+
+	/* SLM-1521-V2, CON2 */
+	sata-port@1 {
+		status = "okay";
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp0_comphy5 1>;
+	};
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins
+		     &cp0_sdhci_cd_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	vqmmc-supply = <&cp0_reg_sd_vccq>;
+	vmmc-supply = <&cp0_reg_sd_vcc>;
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi1_pins>;
+	reg = <0x700680 0x50>;
+
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot-0";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem-0";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_syscon0 {
+	cp0_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp0_i2c0_pins: cp0-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp0_i2c1_pins: cp0-i2c-pins-1 {
+			marvell,pins = "mpp35", "mpp36";
+			marvell,function = "i2c1";
+		};
+		cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 {
+			marvell,pins = "mpp0", "mpp1", "mpp2",
+				       "mpp3", "mpp4", "mpp5",
+				       "mpp6", "mpp7", "mpp8",
+				       "mpp9", "mpp10", "mpp11";
+			marvell,function = "ge0";
+		};
+		cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 {
+			marvell,pins = "mpp44", "mpp45", "mpp46",
+				       "mpp47", "mpp48", "mpp49",
+				       "mpp50", "mpp51", "mpp52",
+				       "mpp53", "mpp54", "mpp55";
+			marvell,function = "ge1";
+		};
+		cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 {
+			marvell,pins = "mpp43";
+			marvell,function = "gpio";
+		};
+		cp0_sdhci_pins: cp0-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+		cp0_spi1_pins: cp0-spi-pins-1 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		nand_pins: nand-pins {
+			marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18",
+				       "mpp19", "mpp20", "mpp21", "mpp22",
+				       "mpp23", "mpp24", "mpp25", "mpp26",
+				       "mpp27";
+			marvell,function = "dev";
+		};
+		nand_rb: nand-rb {
+			marvell,pins = "mpp13";
+			marvell,function = "nf";
+		};
+	};
+};
+
+&cp0_utmi {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy0>;
+	phys = <&cp0_utmi0>;
+	phy-names = "utmi";
+	dr_mode = "host";
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp0_usb3_0_phy1>;
+	phys = <&cp0_utmi1>;
+	phy-names = "utmi";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi
new file mode 100644
index 000000000..327b04134
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9130 SoC.
+ */
+
+#include "armada-ap807-quad.dtsi"
+
+/ {
+	model = "Marvell Armada CN9130 SoC";
+	compatible = "marvell,cn9130", "marvell,armada-ap807-quad",
+		     "marvell,armada-ap807";
+
+	aliases {
+		gpio1 = &cp0_gpio1;
+		gpio2 = &cp0_gpio2;
+		spi1 = &cp0_spi0;
+		spi2 = &cp0_spi1;
+	};
+};
+
+/*
+ * Instantiate the internal CP115
+ */
+
+#define CP11X_NAME		cp0
+#define CP11X_BASE		f2000000
+#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \
+						    0xe0000000 + ((iface - 1) * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000)
+#define CP11X_PCIE0_BASE	f2600000
+#define CP11X_PCIE1_BASE	f2620000
+#define CP11X_PCIE2_BASE	f2640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp0_gpio1 {
+	status = "okay";
+};
+
+&cp0_gpio2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-B.dts b/arch/arm64/boot/dts/marvell/cn9131-db-B.dts
new file mode 100644
index 000000000..183b1ec8b
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-B.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board (setup "B").
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts
new file mode 100644
index 000000000..a60fdee79
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9131-DB setup A";
+};
+
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
+
+&cp0_spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
new file mode 100644
index 000000000..ff8422fae
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	compatible = "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	aliases {
+		gpio3 = &cp1_gpio1;
+		gpio4 = &cp1_gpio2;
+		ethernet3 = &cp1_eth0;
+		ethernet4 = &cp1_eth1;
+	};
+
+	cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_xhci0_vbus_pins>;
+		regulator-name = "cp1-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp1_usb3_0_phy0: cp1_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp1_reg_usb3_vbus0>;
+	};
+
+	cp1_sfp_eth1: sfp-eth1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp1_i2c0>;
+		los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cp1_sfp_pins>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+/*
+ * Instantiate the first slave CP115
+ */
+
+#define CP11X_NAME		cp1
+#define CP11X_BASE		f4000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f4600000
+#define CP11X_PCIE1_BASE	f4620000
+#define CP11X_PCIE2_BASE	f4640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp1_crypto {
+	status = "disabled";
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp1_sfp_eth1>;
+};
+
+&cp1_gpio1 {
+	status = "okay";
+};
+
+&cp1_gpio2 {
+	status = "okay";
+};
+
+&cp1_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	clock-frequency = <100000>;
+};
+
+/* CON40 */
+&cp1_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_pcie_reset_pins>;
+	num-lanes = <2>;
+	num-viewport = <8>;
+	marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy0 0
+		&cp1_comphy1 0>;
+};
+
+&cp1_sata0 {
+	status = "okay";
+
+	/* CON32 */
+	sata-port@1 {
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp1_comphy5 1>;
+	};
+};
+
+/* U24 */
+&cp1_spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi0_pins>;
+	reg = <0x700680 0x50>;
+
+	flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot-1";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem-1";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+
+};
+
+&cp1_syscon0 {
+	cp1_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp1_i2c0_pins: cp1-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp1_spi0_pins: cp1-spi-pins-0 {
+			marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+			marvell,function = "spi1";
+		};
+		cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+			marvell,pins = "mpp3";
+			marvell,function = "gpio";
+		};
+		cp1_sfp_pins: sfp-pins {
+			marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
+			marvell,function = "gpio";
+		};
+		cp1_pcie_reset_pins: cp1-pcie-reset-pins {
+			marvell,pins = "mpp0";
+			marvell,function = "gpio";
+		};
+	};
+};
+
+/* CON58 */
+&cp1_utmi {
+	status = "okay";
+};
+
+&cp1_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp1_usb3_0_phy0>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp1_comphy3 1>, <&cp1_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db-B.dts b/arch/arm64/boot/dts/marvell/cn9132-db-B.dts
new file mode 100644
index 000000000..7137a6f22
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db-B.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9132-DB setup B";
+};
+
+/* Setup B has NAND flash as a boot device, while regular setup uses SPI flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When NAND controller is enabled, SPI1 should be disabled.
+ */
+
+&cp0_nand_controller {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts
new file mode 100644
index 000000000..1f2e6377a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell Armada CN9132-DB setup A";
+};
+
+/* Setup A has SPI1 flash as a boot device, while setup B uses NAND flash.
+ * Since CP0 SPI1 and CP0 NAND are sharing some pins, they cannot be activated
+ * simultaneously. When SPI controller is enabled, NAND should be disabled.
+ */
+
+&cp0_spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
new file mode 100644
index 000000000..512a4fa28
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * Device tree for the CN9132-DB board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+	compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
+		     "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+	aliases {
+		gpio5 = &cp2_gpio1;
+		gpio6 = &cp2_gpio2;
+		ethernet5 = &cp2_eth0;
+	};
+
+	cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy0: cp2_usb3_phy0 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus0>;
+	};
+
+	cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp2-xhci1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	cp2_usb3_0_phy1: cp2_usb3_phy1 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&cp2_reg_usb3_vbus1>;
+	};
+
+	cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+		compatible = "regulator-gpio";
+		regulator-name = "cp2_sd_vcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1 3300000 0x0>;
+	};
+
+	cp2_sfp_eth0: sfp-eth0 {
+		compatible = "sff,sfp";
+		i2c-bus = <&cp2_sfpp0_i2c>;
+		los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		/*
+		 * SFP cages are unconnected on early PCBs because of an the I2C
+		 * lanes not being connected. Prevent the port for being
+		 * unusable by disabling the SFP node.
+		 */
+		status = "disabled";
+	};
+};
+
+/*
+ * Instantiate the second slave CP115
+ */
+
+#define CP11X_NAME		cp2
+#define CP11X_BASE		f6000000
+#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
+#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
+#define CP11X_PCIE0_BASE	f6600000
+#define CP11X_PCIE1_BASE	f6620000
+#define CP11X_PCIE2_BASE	f6640000
+
+#include "armada-cp115.dtsi"
+
+#undef CP11X_NAME
+#undef CP11X_BASE
+#undef CP11X_PCIEx_MEM_BASE
+#undef CP11X_PCIEx_MEM_SIZE
+#undef CP11X_PCIE0_BASE
+#undef CP11X_PCIE1_BASE
+#undef CP11X_PCIE2_BASE
+
+&cp2_crypto {
+	status = "disabled";
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "disabled";
+	phy-mode = "10gbase-r";
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy4 0>;
+	managed = "in-band-status";
+	sfp = <&cp2_sfp_eth0>;
+};
+
+&cp2_gpio1 {
+	status = "okay";
+};
+
+&cp2_gpio2 {
+	status = "okay";
+};
+
+&cp2_i2c0 {
+	clock-frequency = <100000>;
+
+	/* SLM-1521-V2 - U3 */
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		cp2_sfpp0_i2c: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* U12 */
+			cp2_module_expander1: pca9555@21 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x21>;
+			};
+		};
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+	status = "okay";
+	num-lanes = <2>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy0 0
+		&cp2_comphy1 0>;
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+	status = "okay";
+	num-lanes = <1>;
+	num-viewport = <8>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy5 2>;
+};
+
+&cp2_sata0 {
+	status = "okay";
+
+	/* SLM-1521-V2, CON4 */
+	sata-port@0 {
+		/* Generic PHY, providing serdes lanes */
+		phys = <&cp2_comphy2 0>;
+	};
+};
+
+/* CON 2 on SLM-1683 - microSD */
+&cp2_sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_sdhci_pins>;
+	bus-width = <4>;
+	cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&cp2_reg_sd_vccq>;
+};
+
+&cp2_syscon0 {
+	cp2_pinctrl: pinctrl {
+		compatible = "marvell,cp115-standalone-pinctrl";
+
+		cp2_i2c0_pins: cp2-i2c-pins-0 {
+			marvell,pins = "mpp37", "mpp38";
+			marvell,function = "i2c0";
+		};
+		cp2_sdhci_pins: cp2-sdhi-pins-0 {
+			marvell,pins = "mpp56", "mpp57", "mpp58",
+				       "mpp59", "mpp60", "mpp61";
+			marvell,function = "sdio";
+		};
+	};
+};
+
+&cp2_utmi {
+	status = "okay";
+};
+
+&cp2_usb3_0 {
+	status = "okay";
+	usb-phy = <&cp2_usb3_0_phy0>;
+	phys = <&cp2_utmi0>;
+	phy-names = "usb";
+	dr_mode = "host";
+};
+
+/* SLM-1521-V2, CON11 */
+&cp2_usb3_1 {
+	status = "okay";
+	usb-phy = <&cp2_usb3_0_phy1>;
+	/* Generic PHY, providing serdes lanes */
+	phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
+	phy-names = "usb", "utmi";
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
new file mode 100644
index 000000000..c99c3372a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6779-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-sony-xperia-m5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-burnet.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-cozmo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-damu.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku6.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel-sku7.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
new file mode 100644
index 000000000..fffdb7bbf
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt2712e.dtsi"
+
+/ {
+	model = "MediaTek MT2712 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	cpus_fixed_vproc0: regulator-vproc-buck0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vproc_buck0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	cpus_fixed_vproc1: regulator-vproc-buck1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vproc_buck1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	extcon_usb: extcon_iddig {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb1: extcon_iddig1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p0_vbus: regulator-usb-p0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p1_vbus: regulator-usb-p1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p2_vbus: regulator-usb-p2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p3_vbus: regulator-usb-p3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "p3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&cpus_fixed_vproc0>;
+};
+
+&cpu1 {
+	proc-supply = <&cpus_fixed_vproc0>;
+};
+
+&cpu2 {
+	proc-supply = <&cpus_fixed_vproc1>;
+};
+
+&eth {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethernet_phy0>;
+	mediatek,tx-delay-ps = <1530>;
+	snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+	snps,reset-delays-us = <0 10000 10000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default>;
+	pinctrl-1 = <&eth_sleep>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@5 {
+			compatible = "ethernet-phy-id0243.0d90";
+			reg = <0x5>;
+		};
+	};
+};
+
+&pio {
+	eth_default: eth_default {
+		tx_pins {
+			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3>,
+				 <MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2>,
+				 <MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1>,
+				 <MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0>,
+				 <MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC>,
+				 <MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		rx_pins {
+			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3>,
+				 <MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2>,
+				 <MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1>,
+				 <MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0>,
+				 <MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV>,
+				 <MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC>;
+			input-enable;
+		};
+		mdio_pins {
+			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC>,
+				 <MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			input-enable;
+		};
+	};
+
+	eth_sleep: eth_sleep {
+		tx_pins {
+			pinmux = <MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71>,
+				 <MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72>,
+				 <MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73>,
+				 <MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74>,
+				 <MT2712_PIN_75_GBE_TXC__FUNC_GPIO75>,
+				 <MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76>;
+		};
+		rx_pins {
+			pinmux = <MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78>,
+				 <MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79>,
+				 <MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80>,
+				 <MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81>,
+				 <MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82>,
+				 <MT2712_PIN_84_GBE_RXC__FUNC_GPIO84>;
+			input-disable;
+		};
+		mdio_pins {
+			pinmux = <MT2712_PIN_85_GBE_MDC__FUNC_GPIO85>,
+				 <MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	usb0_id_pins_float: usb0_iddig {
+		pins_iddig {
+			pinmux = <MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A>;
+			bias-pull-up;
+		};
+	};
+
+	usb1_id_pins_float: usb1_iddig {
+		pins_iddig {
+			pinmux = <MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ssusb {
+	vbus-supply = <&usb_p0_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	wakeup-source;
+	mediatek,u3p-dis-msk = <0x1>;
+	//enable-manual-drd;
+	//maximum-speed = "full-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_float>;
+	status = "okay";
+};
+
+&ssusb1 {
+	vbus-supply = <&usb_p1_vbus>;
+	extcon = <&extcon_usb1>;
+	dr_mode = "otg";
+	//mediatek,u3p-dis-msk = <0x1>;
+	enable-manual-drd;
+	wakeup-source;
+	//maximum-speed = "full-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_id_pins_float>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host0 {
+	vbus-supply = <&usb_p2_vbus>;
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h
new file mode 100644
index 000000000..385c455a7
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h
@@ -0,0 +1,1123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
+ *
+ */
+#ifndef __DTS_MT2712_PINFUNC_H
+#define __DTS_MT2712_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2712_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2712_PIN_0_EINT0__FUNC_EINT0 (MTK_PIN_NO(0) | 1)
+#define MT2712_PIN_0_EINT0__FUNC_MBIST_DIAG_SCANOUT (MTK_PIN_NO(0) | 2)
+#define MT2712_PIN_0_EINT0__FUNC_DSIA_TE (MTK_PIN_NO(0) | 3)
+#define MT2712_PIN_0_EINT0__FUNC_DSIC_TE (MTK_PIN_NO(0) | 4)
+#define MT2712_PIN_0_EINT0__FUNC_DIN_D3 (MTK_PIN_NO(0) | 5)
+#define MT2712_PIN_0_EINT0__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(0) | 6)
+
+#define MT2712_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2712_PIN_1_EINT1__FUNC_EINT1 (MTK_PIN_NO(1) | 1)
+#define MT2712_PIN_1_EINT1__FUNC_IR_IN (MTK_PIN_NO(1) | 2)
+#define MT2712_PIN_1_EINT1__FUNC_DSIB_TE (MTK_PIN_NO(1) | 3)
+#define MT2712_PIN_1_EINT1__FUNC_DSID_TE (MTK_PIN_NO(1) | 4)
+#define MT2712_PIN_1_EINT1__FUNC_DIN_D4 (MTK_PIN_NO(1) | 5)
+
+#define MT2712_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2712_PIN_2_EINT2__FUNC_EINT2 (MTK_PIN_NO(2) | 1)
+#define MT2712_PIN_2_EINT2__FUNC_IR_IN (MTK_PIN_NO(2) | 2)
+#define MT2712_PIN_2_EINT2__FUNC_LCM_RST1 (MTK_PIN_NO(2) | 3)
+#define MT2712_PIN_2_EINT2__FUNC_DIN_D5 (MTK_PIN_NO(2) | 5)
+
+#define MT2712_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2712_PIN_3_EINT3__FUNC_EINT3 (MTK_PIN_NO(3) | 1)
+#define MT2712_PIN_3_EINT3__FUNC_IR_IN (MTK_PIN_NO(3) | 2)
+#define MT2712_PIN_3_EINT3__FUNC_LCM_RST0 (MTK_PIN_NO(3) | 3)
+#define MT2712_PIN_3_EINT3__FUNC_DIN_D6 (MTK_PIN_NO(3) | 5)
+
+#define MT2712_PIN_4_PWM0__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2712_PIN_4_PWM0__FUNC_PWM0 (MTK_PIN_NO(4) | 1)
+#define MT2712_PIN_4_PWM0__FUNC_DISP0_PWM (MTK_PIN_NO(4) | 2)
+#define MT2712_PIN_4_PWM0__FUNC_DISP1_PWM (MTK_PIN_NO(4) | 3)
+#define MT2712_PIN_4_PWM0__FUNC_DIN_CLK (MTK_PIN_NO(4) | 5)
+
+#define MT2712_PIN_5_PWM1__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2712_PIN_5_PWM1__FUNC_PWM1 (MTK_PIN_NO(5) | 1)
+#define MT2712_PIN_5_PWM1__FUNC_DISP1_PWM (MTK_PIN_NO(5) | 2)
+#define MT2712_PIN_5_PWM1__FUNC_DISP0_PWM (MTK_PIN_NO(5) | 3)
+#define MT2712_PIN_5_PWM1__FUNC_DIN_VSYNC (MTK_PIN_NO(5) | 5)
+
+#define MT2712_PIN_6_PWM2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2712_PIN_6_PWM2__FUNC_PWM2 (MTK_PIN_NO(6) | 1)
+#define MT2712_PIN_6_PWM2__FUNC_DISP0_PWM (MTK_PIN_NO(6) | 2)
+#define MT2712_PIN_6_PWM2__FUNC_DISP1_PWM (MTK_PIN_NO(6) | 3)
+#define MT2712_PIN_6_PWM2__FUNC_DISP2_PWM (MTK_PIN_NO(6) | 4)
+#define MT2712_PIN_6_PWM2__FUNC_DIN_HSYNC (MTK_PIN_NO(6) | 5)
+
+#define MT2712_PIN_7_PWM3__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2712_PIN_7_PWM3__FUNC_PWM3 (MTK_PIN_NO(7) | 1)
+#define MT2712_PIN_7_PWM3__FUNC_DISP1_PWM (MTK_PIN_NO(7) | 2)
+#define MT2712_PIN_7_PWM3__FUNC_DISP0_PWM (MTK_PIN_NO(7) | 3)
+#define MT2712_PIN_7_PWM3__FUNC_LCM_RST2 (MTK_PIN_NO(7) | 4)
+#define MT2712_PIN_7_PWM3__FUNC_DIN_D0 (MTK_PIN_NO(7) | 5)
+
+#define MT2712_PIN_8_PWM4__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2712_PIN_8_PWM4__FUNC_PWM4 (MTK_PIN_NO(8) | 1)
+#define MT2712_PIN_8_PWM4__FUNC_DISP0_PWM (MTK_PIN_NO(8) | 2)
+#define MT2712_PIN_8_PWM4__FUNC_DISP1_PWM (MTK_PIN_NO(8) | 3)
+#define MT2712_PIN_8_PWM4__FUNC_DSIA_TE (MTK_PIN_NO(8) | 4)
+#define MT2712_PIN_8_PWM4__FUNC_DIN_D1 (MTK_PIN_NO(8) | 5)
+
+#define MT2712_PIN_9_PWM5__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2712_PIN_9_PWM5__FUNC_PWM5 (MTK_PIN_NO(9) | 1)
+#define MT2712_PIN_9_PWM5__FUNC_DISP1_PWM (MTK_PIN_NO(9) | 2)
+#define MT2712_PIN_9_PWM5__FUNC_DISP0_PWM (MTK_PIN_NO(9) | 3)
+#define MT2712_PIN_9_PWM5__FUNC_DSIB_TE (MTK_PIN_NO(9) | 4)
+#define MT2712_PIN_9_PWM5__FUNC_DIN_D2 (MTK_PIN_NO(9) | 5)
+
+#define MT2712_PIN_10_PWM6__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2712_PIN_10_PWM6__FUNC_PWM6 (MTK_PIN_NO(10) | 1)
+#define MT2712_PIN_10_PWM6__FUNC_DISP0_PWM (MTK_PIN_NO(10) | 2)
+#define MT2712_PIN_10_PWM6__FUNC_DISP1_PWM (MTK_PIN_NO(10) | 3)
+#define MT2712_PIN_10_PWM6__FUNC_LCM_RST0 (MTK_PIN_NO(10) | 4)
+
+#define MT2712_PIN_11_PWM7__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2712_PIN_11_PWM7__FUNC_PWM7 (MTK_PIN_NO(11) | 1)
+#define MT2712_PIN_11_PWM7__FUNC_DISP1_PWM (MTK_PIN_NO(11) | 2)
+#define MT2712_PIN_11_PWM7__FUNC_DISP0_PWM (MTK_PIN_NO(11) | 3)
+#define MT2712_PIN_11_PWM7__FUNC_LCM_RST1 (MTK_PIN_NO(11) | 4)
+
+#define MT2712_PIN_12_IDDIG_P0__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A (MTK_PIN_NO(12) | 1)
+#define MT2712_PIN_12_IDDIG_P0__FUNC_DIN_D7 (MTK_PIN_NO(12) | 5)
+
+#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_DRV_VBUS_A (MTK_PIN_NO(13) | 1)
+
+#define MT2712_PIN_14_IDDIG_P1__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B (MTK_PIN_NO(14) | 1)
+
+#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_DRV_VBUS_B (MTK_PIN_NO(15) | 1)
+
+#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_DRV_VBUS_C (MTK_PIN_NO(16) | 1)
+
+#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_DRV_VBUS_D (MTK_PIN_NO(17) | 1)
+
+#define MT2712_PIN_18_KPROW0__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2712_PIN_18_KPROW0__FUNC_KROW0 (MTK_PIN_NO(18) | 1)
+
+#define MT2712_PIN_19_KPCOL0__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2712_PIN_19_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(19) | 1)
+
+#define MT2712_PIN_20_KPROW1__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2712_PIN_20_KPROW1__FUNC_KROW1 (MTK_PIN_NO(20) | 1)
+
+#define MT2712_PIN_21_KPCOL1__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2712_PIN_21_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(21) | 1)
+
+#define MT2712_PIN_22_KPROW2__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2712_PIN_22_KPROW2__FUNC_KROW2 (MTK_PIN_NO(22) | 1)
+#define MT2712_PIN_22_KPROW2__FUNC_DISP1_PWM (MTK_PIN_NO(22) | 2)
+
+#define MT2712_PIN_23_KPCOL2__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2712_PIN_23_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(23) | 1)
+#define MT2712_PIN_23_KPCOL2__FUNC_DISP0_PWM (MTK_PIN_NO(23) | 2)
+
+#define MT2712_PIN_24_CMMCLK__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2712_PIN_24_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(24) | 1)
+#define MT2712_PIN_24_CMMCLK__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(24) | 7)
+
+#define MT2712_PIN_25_CM2MCLK__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2712_PIN_25_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(25) | 1)
+#define MT2712_PIN_25_CM2MCLK__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(25) | 7)
+
+#define MT2712_PIN_26_PCM_TX__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(26) | 1)
+#define MT2712_PIN_26_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(26) | 2)
+#define MT2712_PIN_26_PCM_TX__FUNC_DAI_TX (MTK_PIN_NO(26) | 3)
+#define MT2712_PIN_26_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(26) | 4)
+#define MT2712_PIN_26_PCM_TX__FUNC_DAI_RX (MTK_PIN_NO(26) | 5)
+#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DI (MTK_PIN_NO(26) | 6)
+#define MT2712_PIN_26_PCM_TX__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(26) | 7)
+
+#define MT2712_PIN_27_PCM_CLK__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2712_PIN_27_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(27) | 1)
+#define MT2712_PIN_27_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(27) | 2)
+#define MT2712_PIN_27_PCM_CLK__FUNC_DAI_CLK (MTK_PIN_NO(27) | 3)
+#define MT2712_PIN_27_PCM_CLK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(27) | 7)
+
+#define MT2712_PIN_28_PCM_RX__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(28) | 1)
+#define MT2712_PIN_28_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(28) | 2)
+#define MT2712_PIN_28_PCM_RX__FUNC_DAI_RX (MTK_PIN_NO(28) | 3)
+#define MT2712_PIN_28_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(28) | 4)
+#define MT2712_PIN_28_PCM_RX__FUNC_DAI_TX (MTK_PIN_NO(28) | 5)
+#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DO (MTK_PIN_NO(28) | 6)
+#define MT2712_PIN_28_PCM_RX__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(28) | 7)
+
+#define MT2712_PIN_29_PCM_SYNC__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(29) | 1)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(29) | 2)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_DAI_SYNC (MTK_PIN_NO(29) | 3)
+#define MT2712_PIN_29_PCM_SYNC__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(29) | 7)
+
+#define MT2712_PIN_30_NCEB0__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT2712_PIN_30_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(30) | 1)
+#define MT2712_PIN_30_NCEB0__FUNC_USB0_FT_SDA (MTK_PIN_NO(30) | 2)
+#define MT2712_PIN_30_NCEB0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(30) | 7)
+
+#define MT2712_PIN_31_NCEB1__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT2712_PIN_31_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(31) | 1)
+#define MT2712_PIN_31_NCEB1__FUNC_USB1_FT_SCL (MTK_PIN_NO(31) | 2)
+#define MT2712_PIN_31_NCEB1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(31) | 7)
+
+#define MT2712_PIN_32_NF_DQS__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT2712_PIN_32_NF_DQS__FUNC_NF_DQS (MTK_PIN_NO(32) | 1)
+#define MT2712_PIN_32_NF_DQS__FUNC_USB1_FT_SDA (MTK_PIN_NO(32) | 2)
+#define MT2712_PIN_32_NF_DQS__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(32) | 7)
+
+#define MT2712_PIN_33_NWEB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2712_PIN_33_NWEB__FUNC_NWEB (MTK_PIN_NO(33) | 1)
+#define MT2712_PIN_33_NWEB__FUNC_USB2_FT_SCL (MTK_PIN_NO(33) | 2)
+#define MT2712_PIN_33_NWEB__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(33) | 7)
+
+#define MT2712_PIN_34_NREB__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2712_PIN_34_NREB__FUNC_NREB (MTK_PIN_NO(34) | 1)
+#define MT2712_PIN_34_NREB__FUNC_USB2_FT_SDA (MTK_PIN_NO(34) | 2)
+#define MT2712_PIN_34_NREB__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(34) | 7)
+
+#define MT2712_PIN_35_NCLE__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2712_PIN_35_NCLE__FUNC_NCLE (MTK_PIN_NO(35) | 1)
+#define MT2712_PIN_35_NCLE__FUNC_USB3_FT_SCL (MTK_PIN_NO(35) | 2)
+#define MT2712_PIN_35_NCLE__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(35) | 7)
+
+#define MT2712_PIN_36_NALE__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2712_PIN_36_NALE__FUNC_NALE (MTK_PIN_NO(36) | 1)
+#define MT2712_PIN_36_NALE__FUNC_USB3_FT_SDA (MTK_PIN_NO(36) | 2)
+#define MT2712_PIN_36_NALE__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(36) | 7)
+
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(37) | 1)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_USB0_FT_SCL (MTK_PIN_NO(37) | 2)
+#define MT2712_PIN_37_MSDC0E_CLK__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(37) | 7)
+
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(38) | 1)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_NAND_ND7 (MTK_PIN_NO(38) | 2)
+#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(38) | 7)
+
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(39) | 1)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_NAND_ND6 (MTK_PIN_NO(39) | 2)
+#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(39) | 7)
+
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(40) | 1)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_NAND_ND5 (MTK_PIN_NO(40) | 2)
+#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(40) | 7)
+
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(41) | 1)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_NAND_ND4 (MTK_PIN_NO(41) | 2)
+#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(41) | 7)
+
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(42) | 1)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_NAND_ND3 (MTK_PIN_NO(42) | 2)
+#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(42) | 7)
+
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(43) | 1)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_NAND_ND2 (MTK_PIN_NO(43) | 2)
+#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(43) | 7)
+
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(44) | 1)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_NAND_ND1 (MTK_PIN_NO(44) | 2)
+#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(44) | 7)
+
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(45) | 1)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_NAND_ND0 (MTK_PIN_NO(45) | 2)
+#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(45) | 7)
+
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(46) | 1)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_NAND_NRNB (MTK_PIN_NO(46) | 2)
+#define MT2712_PIN_46_MSDC0E_CMD__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(46) | 7)
+
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(47) | 1)
+#define MT2712_PIN_47_MSDC0E_DSL__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(47) | 7)
+
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(48) | 1)
+#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(48) | 7)
+
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(49) | 1)
+#define MT2712_PIN_49_MSDC3_DAT3__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(49) | 7)
+
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(50) | 1)
+#define MT2712_PIN_50_MSDC3_DAT2__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(50) | 7)
+
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(51) | 1)
+#define MT2712_PIN_51_MSDC3_DAT1__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(51) | 7)
+
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(52) | 1)
+#define MT2712_PIN_52_MSDC3_DAT0__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(52) | 7)
+
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(53) | 1)
+#define MT2712_PIN_53_MSDC3_CMD__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(53) | 7)
+
+#define MT2712_PIN_54_MSDC3_INS__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2712_PIN_54_MSDC3_INS__FUNC_MSDC3_INS (MTK_PIN_NO(54) | 1)
+#define MT2712_PIN_54_MSDC3_INS__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(54) | 7)
+
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(55) | 1)
+#define MT2712_PIN_55_MSDC3_DSL__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(55) | 7)
+
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(56) | 1)
+#define MT2712_PIN_56_MSDC3_CLK__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(56) | 7)
+
+#define MT2712_PIN_57_NOR_CS__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2712_PIN_57_NOR_CS__FUNC_NOR_CS (MTK_PIN_NO(57) | 1)
+
+#define MT2712_PIN_58_NOR_CK__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2712_PIN_58_NOR_CK__FUNC_NOR_CK (MTK_PIN_NO(58) | 1)
+
+#define MT2712_PIN_59_NOR_IO0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT2712_PIN_59_NOR_IO0__FUNC_NOR_IO0 (MTK_PIN_NO(59) | 1)
+
+#define MT2712_PIN_60_NOR_IO1__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT2712_PIN_60_NOR_IO1__FUNC_NOR_IO1 (MTK_PIN_NO(60) | 1)
+
+#define MT2712_PIN_61_NOR_IO2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT2712_PIN_61_NOR_IO2__FUNC_NOR_IO2 (MTK_PIN_NO(61) | 1)
+
+#define MT2712_PIN_62_NOR_IO3__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT2712_PIN_62_NOR_IO3__FUNC_NOR_IO3 (MTK_PIN_NO(62) | 1)
+
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(63) | 1)
+#define MT2712_PIN_63_MSDC1_CLK__FUNC_UDI_TCK (MTK_PIN_NO(63) | 2)
+
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(64) | 1)
+#define MT2712_PIN_64_MSDC1_DAT3__FUNC_UDI_TDI (MTK_PIN_NO(64) | 2)
+
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(65) | 1)
+#define MT2712_PIN_65_MSDC1_DAT1__FUNC_UDI_TMS (MTK_PIN_NO(65) | 2)
+
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(66) | 1)
+#define MT2712_PIN_66_MSDC1_DAT2__FUNC_UDI_TDO (MTK_PIN_NO(66) | 2)
+
+#define MT2712_PIN_67_MSDC1_PSW__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT2712_PIN_67_MSDC1_PSW__FUNC_UDI_NTRST (MTK_PIN_NO(67) | 2)
+
+#define MT2712_PIN_68_MSDC1_DAT0__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT2712_PIN_68_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(68) | 1)
+
+#define MT2712_PIN_69_MSDC1_CMD__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT2712_PIN_69_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(69) | 1)
+
+#define MT2712_PIN_70_MSDC1_INS__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+
+#define MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3 (MTK_PIN_NO(71) | 1)
+#define MT2712_PIN_71_GBE_TXD3__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(71) | 7)
+
+#define MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2 (MTK_PIN_NO(72) | 1)
+#define MT2712_PIN_72_GBE_TXD2__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(72) | 7)
+
+#define MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1 (MTK_PIN_NO(73) | 1)
+#define MT2712_PIN_73_GBE_TXD1__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(73) | 7)
+
+#define MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0 (MTK_PIN_NO(74) | 1)
+#define MT2712_PIN_74_GBE_TXD0__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(74) | 7)
+
+#define MT2712_PIN_75_GBE_TXC__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC (MTK_PIN_NO(75) | 1)
+#define MT2712_PIN_75_GBE_TXC__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(75) | 7)
+
+#define MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN (MTK_PIN_NO(76) | 1)
+#define MT2712_PIN_76_GBE_TXEN__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(76) | 7)
+
+#define MT2712_PIN_77_GBE_TXER__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2712_PIN_77_GBE_TXER__FUNC_GBE_TXER (MTK_PIN_NO(77) | 1)
+#define MT2712_PIN_77_GBE_TXER__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(77) | 7)
+
+#define MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3 (MTK_PIN_NO(78) | 1)
+#define MT2712_PIN_78_GBE_RXD3__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(78) | 7)
+
+#define MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2 (MTK_PIN_NO(79) | 1)
+#define MT2712_PIN_79_GBE_RXD2__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(79) | 7)
+
+#define MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1 (MTK_PIN_NO(80) | 1)
+#define MT2712_PIN_80_GBE_RXD1__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(80) | 7)
+
+#define MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0 (MTK_PIN_NO(81) | 1)
+#define MT2712_PIN_81_GBE_RXD0__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(81) | 7)
+
+#define MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV (MTK_PIN_NO(82) | 1)
+#define MT2712_PIN_82_GBE_RXDV__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(82) | 7)
+
+#define MT2712_PIN_83_GBE_RXER__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2712_PIN_83_GBE_RXER__FUNC_GBE_RXER (MTK_PIN_NO(83) | 1)
+#define MT2712_PIN_83_GBE_RXER__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(83) | 7)
+
+#define MT2712_PIN_84_GBE_RXC__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC (MTK_PIN_NO(84) | 1)
+#define MT2712_PIN_84_GBE_RXC__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(84) | 7)
+
+#define MT2712_PIN_85_GBE_MDC__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC (MTK_PIN_NO(85) | 1)
+#define MT2712_PIN_85_GBE_MDC__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(85) | 7)
+
+#define MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO (MTK_PIN_NO(86) | 1)
+#define MT2712_PIN_86_GBE_MDIO__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(86) | 7)
+
+#define MT2712_PIN_87_GBE_COL__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT2712_PIN_87_GBE_COL__FUNC_GBE_COL (MTK_PIN_NO(87) | 1)
+#define MT2712_PIN_87_GBE_COL__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(87) | 7)
+
+#define MT2712_PIN_88_GBE_INTR__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_INTR (MTK_PIN_NO(88) | 1)
+#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_CRS (MTK_PIN_NO(88) | 2)
+#define MT2712_PIN_88_GBE_INTR__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(88) | 7)
+
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(89) | 1)
+#define MT2712_PIN_89_MSDC2_CLK__FUNC_DBG_MON_B_18_ (MTK_PIN_NO(89) | 7)
+
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(90) | 1)
+#define MT2712_PIN_90_MSDC2_DAT3__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(90) | 7)
+
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(91) | 1)
+#define MT2712_PIN_91_MSDC2_DAT2__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(91) | 7)
+
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(92) | 1)
+#define MT2712_PIN_92_MSDC2_DAT1__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(92) | 7)
+
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(93) | 1)
+#define MT2712_PIN_93_MSDC2_DAT0__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(93) | 7)
+
+#define MT2712_PIN_94_MSDC2_INS__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT2712_PIN_94_MSDC2_INS__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(94) | 7)
+
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(95) | 1)
+#define MT2712_PIN_95_MSDC2_CMD__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(95) | 7)
+
+#define MT2712_PIN_96_MSDC2_PSW__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT2712_PIN_96_MSDC2_PSW__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(96) | 7)
+
+#define MT2712_PIN_97_URXD4__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT2712_PIN_97_URXD4__FUNC_URXD4 (MTK_PIN_NO(97) | 1)
+#define MT2712_PIN_97_URXD4__FUNC_UTXD4 (MTK_PIN_NO(97) | 2)
+#define MT2712_PIN_97_URXD4__FUNC_MRG_CLK (MTK_PIN_NO(97) | 3)
+#define MT2712_PIN_97_URXD4__FUNC_PCM1_CLK (MTK_PIN_NO(97) | 4)
+#define MT2712_PIN_97_URXD4__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(97) | 5)
+#define MT2712_PIN_97_URXD4__FUNC_I2SO1_WS (MTK_PIN_NO(97) | 6)
+#define MT2712_PIN_97_URXD4__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(97) | 7)
+
+#define MT2712_PIN_98_URTS4__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT2712_PIN_98_URTS4__FUNC_URTS4 (MTK_PIN_NO(98) | 1)
+#define MT2712_PIN_98_URTS4__FUNC_UCTS4 (MTK_PIN_NO(98) | 2)
+#define MT2712_PIN_98_URTS4__FUNC_MRG_RX (MTK_PIN_NO(98) | 3)
+#define MT2712_PIN_98_URTS4__FUNC_PCM1_DI (MTK_PIN_NO(98) | 4)
+#define MT2712_PIN_98_URTS4__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(98) | 5)
+#define MT2712_PIN_98_URTS4__FUNC_I2SO1_MCK (MTK_PIN_NO(98) | 6)
+#define MT2712_PIN_98_URTS4__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(98) | 7)
+
+#define MT2712_PIN_99_UTXD4__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT2712_PIN_99_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(99) | 1)
+#define MT2712_PIN_99_UTXD4__FUNC_URXD4 (MTK_PIN_NO(99) | 2)
+#define MT2712_PIN_99_UTXD4__FUNC_MRG_SYNC (MTK_PIN_NO(99) | 3)
+#define MT2712_PIN_99_UTXD4__FUNC_PCM1_SYNC (MTK_PIN_NO(99) | 4)
+#define MT2712_PIN_99_UTXD4__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(99) | 5)
+#define MT2712_PIN_99_UTXD4__FUNC_I2SO1_BCK (MTK_PIN_NO(99) | 6)
+#define MT2712_PIN_99_UTXD4__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(99) | 7)
+
+#define MT2712_PIN_100_UCTS4__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT2712_PIN_100_UCTS4__FUNC_UCTS4 (MTK_PIN_NO(100) | 1)
+#define MT2712_PIN_100_UCTS4__FUNC_URTS4 (MTK_PIN_NO(100) | 2)
+#define MT2712_PIN_100_UCTS4__FUNC_MRG_TX (MTK_PIN_NO(100) | 3)
+#define MT2712_PIN_100_UCTS4__FUNC_PCM1_DO (MTK_PIN_NO(100) | 4)
+#define MT2712_PIN_100_UCTS4__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(100) | 5)
+#define MT2712_PIN_100_UCTS4__FUNC_I2SO1_DO (MTK_PIN_NO(100) | 6)
+#define MT2712_PIN_100_UCTS4__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(100) | 7)
+
+#define MT2712_PIN_101_URXD5__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2712_PIN_101_URXD5__FUNC_URXD5 (MTK_PIN_NO(101) | 1)
+#define MT2712_PIN_101_URXD5__FUNC_UTXD5 (MTK_PIN_NO(101) | 2)
+#define MT2712_PIN_101_URXD5__FUNC_I2SO3_WS (MTK_PIN_NO(101) | 3)
+#define MT2712_PIN_101_URXD5__FUNC_TDMIN_LRCK (MTK_PIN_NO(101) | 4)
+#define MT2712_PIN_101_URXD5__FUNC_I2SO0_WS (MTK_PIN_NO(101) | 6)
+#define MT2712_PIN_101_URXD5__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(101) | 7)
+
+#define MT2712_PIN_102_URTS5__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2712_PIN_102_URTS5__FUNC_URTS5 (MTK_PIN_NO(102) | 1)
+#define MT2712_PIN_102_URTS5__FUNC_UCTS5 (MTK_PIN_NO(102) | 2)
+#define MT2712_PIN_102_URTS5__FUNC_I2SO3_MCK (MTK_PIN_NO(102) | 3)
+#define MT2712_PIN_102_URTS5__FUNC_TDMIN_MCLK (MTK_PIN_NO(102) | 4)
+#define MT2712_PIN_102_URTS5__FUNC_IR_IN (MTK_PIN_NO(102) | 5)
+#define MT2712_PIN_102_URTS5__FUNC_I2SO0_MCK (MTK_PIN_NO(102) | 6)
+#define MT2712_PIN_102_URTS5__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(102) | 7)
+
+#define MT2712_PIN_103_UTXD5__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2712_PIN_103_UTXD5__FUNC_UTXD5 (MTK_PIN_NO(103) | 1)
+#define MT2712_PIN_103_UTXD5__FUNC_URXD5 (MTK_PIN_NO(103) | 2)
+#define MT2712_PIN_103_UTXD5__FUNC_I2SO3_BCK (MTK_PIN_NO(103) | 3)
+#define MT2712_PIN_103_UTXD5__FUNC_TDMIN_BCK (MTK_PIN_NO(103) | 4)
+#define MT2712_PIN_103_UTXD5__FUNC_I2SO0_BCK (MTK_PIN_NO(103) | 6)
+#define MT2712_PIN_103_UTXD5__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(103) | 7)
+
+#define MT2712_PIN_104_UCTS5__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2712_PIN_104_UCTS5__FUNC_UCTS5 (MTK_PIN_NO(104) | 1)
+#define MT2712_PIN_104_UCTS5__FUNC_URTS5 (MTK_PIN_NO(104) | 2)
+#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO1 (MTK_PIN_NO(104) | 3)
+#define MT2712_PIN_104_UCTS5__FUNC_TDMIN_DI (MTK_PIN_NO(104) | 4)
+#define MT2712_PIN_104_UCTS5__FUNC_IR_IN (MTK_PIN_NO(104) | 5)
+#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO0 (MTK_PIN_NO(104) | 6)
+
+#define MT2712_PIN_105_I2C_SDA0__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2712_PIN_105_I2C_SDA0__FUNC_SDA0 (MTK_PIN_NO(105) | 1)
+
+#define MT2712_PIN_106_I2C_SDA1__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2712_PIN_106_I2C_SDA1__FUNC_SDA1 (MTK_PIN_NO(106) | 1)
+
+#define MT2712_PIN_107_I2C_SDA2__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2712_PIN_107_I2C_SDA2__FUNC_SDA2 (MTK_PIN_NO(107) | 1)
+
+#define MT2712_PIN_108_I2C_SDA3__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2712_PIN_108_I2C_SDA3__FUNC_SDA3 (MTK_PIN_NO(108) | 1)
+
+#define MT2712_PIN_109_I2C_SDA4__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2712_PIN_109_I2C_SDA4__FUNC_SDA4 (MTK_PIN_NO(109) | 1)
+
+#define MT2712_PIN_110_I2C_SDA5__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2712_PIN_110_I2C_SDA5__FUNC_SDA5 (MTK_PIN_NO(110) | 1)
+
+#define MT2712_PIN_111_I2C_SCL0__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2712_PIN_111_I2C_SCL0__FUNC_SCL0 (MTK_PIN_NO(111) | 1)
+
+#define MT2712_PIN_112_I2C_SCL1__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2712_PIN_112_I2C_SCL1__FUNC_SCL1 (MTK_PIN_NO(112) | 1)
+
+#define MT2712_PIN_113_I2C_SCL2__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2712_PIN_113_I2C_SCL2__FUNC_SCL2 (MTK_PIN_NO(113) | 1)
+
+#define MT2712_PIN_114_I2C_SCL3__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2712_PIN_114_I2C_SCL3__FUNC_SCL3 (MTK_PIN_NO(114) | 1)
+
+#define MT2712_PIN_115_I2C_SCL4__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2712_PIN_115_I2C_SCL4__FUNC_SCL4 (MTK_PIN_NO(115) | 1)
+
+#define MT2712_PIN_116_I2C_SCL5__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2712_PIN_116_I2C_SCL5__FUNC_SCL5 (MTK_PIN_NO(116) | 1)
+
+#define MT2712_PIN_117_URXD0__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2712_PIN_117_URXD0__FUNC_URXD0 (MTK_PIN_NO(117) | 1)
+#define MT2712_PIN_117_URXD0__FUNC_UTXD0 (MTK_PIN_NO(117) | 2)
+
+#define MT2712_PIN_118_URXD1__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2712_PIN_118_URXD1__FUNC_URXD1 (MTK_PIN_NO(118) | 1)
+#define MT2712_PIN_118_URXD1__FUNC_UTXD1 (MTK_PIN_NO(118) | 2)
+
+#define MT2712_PIN_119_URXD2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2712_PIN_119_URXD2__FUNC_URXD2 (MTK_PIN_NO(119) | 1)
+#define MT2712_PIN_119_URXD2__FUNC_UTXD2 (MTK_PIN_NO(119) | 2)
+
+#define MT2712_PIN_120_UTXD0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2712_PIN_120_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(120) | 1)
+#define MT2712_PIN_120_UTXD0__FUNC_URXD0 (MTK_PIN_NO(120) | 2)
+
+#define MT2712_PIN_121_UTXD1__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2712_PIN_121_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(121) | 1)
+#define MT2712_PIN_121_UTXD1__FUNC_URXD1 (MTK_PIN_NO(121) | 2)
+
+#define MT2712_PIN_122_UTXD2__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2712_PIN_122_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(122) | 1)
+#define MT2712_PIN_122_UTXD2__FUNC_URXD2 (MTK_PIN_NO(122) | 2)
+
+#define MT2712_PIN_123_URXD3__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2712_PIN_123_URXD3__FUNC_URXD3 (MTK_PIN_NO(123) | 1)
+#define MT2712_PIN_123_URXD3__FUNC_UTXD3 (MTK_PIN_NO(123) | 2)
+#define MT2712_PIN_123_URXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(123) | 3)
+
+#define MT2712_PIN_124_UTXD3__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2712_PIN_124_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(124) | 1)
+#define MT2712_PIN_124_UTXD3__FUNC_URXD3 (MTK_PIN_NO(124) | 2)
+#define MT2712_PIN_124_UTXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(124) | 3)
+
+#define MT2712_PIN_125_URTS3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2712_PIN_125_URTS3__FUNC_URTS3 (MTK_PIN_NO(125) | 1)
+#define MT2712_PIN_125_URTS3__FUNC_UCTS3 (MTK_PIN_NO(125) | 2)
+#define MT2712_PIN_125_URTS3__FUNC_WATCH_DOG (MTK_PIN_NO(125) | 3)
+
+#define MT2712_PIN_126_UCTS3__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2712_PIN_126_UCTS3__FUNC_UCTS3 (MTK_PIN_NO(126) | 1)
+#define MT2712_PIN_126_UCTS3__FUNC_URTS3 (MTK_PIN_NO(126) | 2)
+#define MT2712_PIN_126_UCTS3__FUNC_SRCLKENA0 (MTK_PIN_NO(126) | 3)
+
+#define MT2712_PIN_127_SPI2_CSN__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_2_ (MTK_PIN_NO(127) | 1)
+#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(127) | 2)
+
+#define MT2712_PIN_128_SPI2_MO__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_MO_2_ (MTK_PIN_NO(128) | 1)
+#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(128) | 2)
+
+#define MT2712_PIN_129_SPI2_MI__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 1)
+#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(129) | 2)
+
+#define MT2712_PIN_130_SPI2_CK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_2_ (MTK_PIN_NO(130) | 1)
+#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(130) | 2)
+
+#define MT2712_PIN_131_SPI3_CSN__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT2712_PIN_131_SPI3_CSN__FUNC_SPI_CS_3_ (MTK_PIN_NO(131) | 1)
+
+#define MT2712_PIN_132_SPI3_MO__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT2712_PIN_132_SPI3_MO__FUNC_SPI_MO_3_ (MTK_PIN_NO(132) | 1)
+
+#define MT2712_PIN_133_SPI3_MI__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT2712_PIN_133_SPI3_MI__FUNC_SPI_MI_3_ (MTK_PIN_NO(133) | 1)
+
+#define MT2712_PIN_134_SPI3_CK__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT2712_PIN_134_SPI3_CK__FUNC_SPI_CK_3_ (MTK_PIN_NO(134) | 1)
+
+#define MT2712_PIN_135_KPROW3__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT2712_PIN_135_KPROW3__FUNC_KROW3 (MTK_PIN_NO(135) | 1)
+#define MT2712_PIN_135_KPROW3__FUNC_DSIC_TE (MTK_PIN_NO(135) | 2)
+
+#define MT2712_PIN_136_KPROW4__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT2712_PIN_136_KPROW4__FUNC_KROW4 (MTK_PIN_NO(136) | 1)
+#define MT2712_PIN_136_KPROW4__FUNC_DSID_TE (MTK_PIN_NO(136) | 2)
+
+#define MT2712_PIN_137_KPCOL3__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT2712_PIN_137_KPCOL3__FUNC_KCOL3 (MTK_PIN_NO(137) | 1)
+#define MT2712_PIN_137_KPCOL3__FUNC_DISP2_PWM (MTK_PIN_NO(137) | 2)
+
+#define MT2712_PIN_138_KPCOL4__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT2712_PIN_138_KPCOL4__FUNC_KCOL4 (MTK_PIN_NO(138) | 1)
+#define MT2712_PIN_138_KPCOL4__FUNC_LCM_RST2 (MTK_PIN_NO(138) | 2)
+
+#define MT2712_PIN_139_KPCOL5__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT2712_PIN_139_KPCOL5__FUNC_KCOL5 (MTK_PIN_NO(139) | 1)
+#define MT2712_PIN_139_KPCOL5__FUNC_DSIA_TE (MTK_PIN_NO(139) | 3)
+#define MT2712_PIN_139_KPCOL5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(139) | 4)
+
+#define MT2712_PIN_140_KPCOL6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT2712_PIN_140_KPCOL6__FUNC_KCOL6 (MTK_PIN_NO(140) | 1)
+#define MT2712_PIN_140_KPCOL6__FUNC_WATCH_DOG (MTK_PIN_NO(140) | 2)
+#define MT2712_PIN_140_KPCOL6__FUNC_LCM_RST1 (MTK_PIN_NO(140) | 3)
+
+#define MT2712_PIN_141_KPROW5__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT2712_PIN_141_KPROW5__FUNC_KROW5 (MTK_PIN_NO(141) | 1)
+#define MT2712_PIN_141_KPROW5__FUNC_LCM_RST0 (MTK_PIN_NO(141) | 3)
+#define MT2712_PIN_141_KPROW5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(141) | 4)
+
+#define MT2712_PIN_142_KPROW6__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT2712_PIN_142_KPROW6__FUNC_KROW6 (MTK_PIN_NO(142) | 1)
+#define MT2712_PIN_142_KPROW6__FUNC_SRCLKENA0 (MTK_PIN_NO(142) | 2)
+#define MT2712_PIN_142_KPROW6__FUNC_DSIB_TE (MTK_PIN_NO(142) | 3)
+
+#define MT2712_PIN_143_JTDO_ICE__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT2712_PIN_143_JTDO_ICE__FUNC_JTDO_ICE (MTK_PIN_NO(143) | 1)
+#define MT2712_PIN_143_JTDO_ICE__FUNC_DFD_TDO (MTK_PIN_NO(143) | 3)
+
+#define MT2712_PIN_144_JTCK_ICE__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT2712_PIN_144_JTCK_ICE__FUNC_JTCK_ICE (MTK_PIN_NO(144) | 1)
+#define MT2712_PIN_144_JTCK_ICE__FUNC_DFD_TCK (MTK_PIN_NO(144) | 3)
+
+#define MT2712_PIN_145_JTDI_ICE__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT2712_PIN_145_JTDI_ICE__FUNC_JTDI_ICE (MTK_PIN_NO(145) | 1)
+#define MT2712_PIN_145_JTDI_ICE__FUNC_DFD_TDI (MTK_PIN_NO(145) | 3)
+
+#define MT2712_PIN_146_JTMS_ICE__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT2712_PIN_146_JTMS_ICE__FUNC_JTMS_ICE (MTK_PIN_NO(146) | 1)
+#define MT2712_PIN_146_JTMS_ICE__FUNC_DFD_TMS (MTK_PIN_NO(146) | 3)
+
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_JTRST_B_ICE (MTK_PIN_NO(147) | 1)
+#define MT2712_PIN_147_JTRSTB_ICE__FUNC_DFD_NTRST (MTK_PIN_NO(147) | 3)
+
+#define MT2712_PIN_148_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT2712_PIN_148_GPIO148__FUNC_JTRSTB_CM4 (MTK_PIN_NO(148) | 1)
+#define MT2712_PIN_148_GPIO148__FUNC_DFD_NTRST (MTK_PIN_NO(148) | 3)
+
+#define MT2712_PIN_149_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT2712_PIN_149_GPIO149__FUNC_JTCK_CM4 (MTK_PIN_NO(149) | 1)
+#define MT2712_PIN_149_GPIO149__FUNC_DFD_TCK (MTK_PIN_NO(149) | 3)
+
+#define MT2712_PIN_150_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT2712_PIN_150_GPIO150__FUNC_JTMS_CM4 (MTK_PIN_NO(150) | 1)
+#define MT2712_PIN_150_GPIO150__FUNC_DFD_TMS (MTK_PIN_NO(150) | 3)
+
+#define MT2712_PIN_151_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT2712_PIN_151_GPIO151__FUNC_JTDI_CM4 (MTK_PIN_NO(151) | 1)
+#define MT2712_PIN_151_GPIO151__FUNC_DFD_TDI (MTK_PIN_NO(151) | 3)
+
+#define MT2712_PIN_152_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT2712_PIN_152_GPIO152__FUNC_JTDO_CM4 (MTK_PIN_NO(152) | 1)
+#define MT2712_PIN_152_GPIO152__FUNC_DFD_TDO (MTK_PIN_NO(152) | 3)
+
+#define MT2712_PIN_153_SPI0_CSN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_SPI_CS_0_ (MTK_PIN_NO(153) | 1)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_SRCLKENA0 (MTK_PIN_NO(153) | 2)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_UTXD0 (MTK_PIN_NO(153) | 3)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(153) | 4)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(153) | 6)
+#define MT2712_PIN_153_SPI0_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(153) | 7)
+
+#define MT2712_PIN_154_SPI0_MI__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT2712_PIN_154_SPI0_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(154) | 1)
+#define MT2712_PIN_154_SPI0_MI__FUNC_SRCLKENA0 (MTK_PIN_NO(154) | 2)
+#define MT2712_PIN_154_SPI0_MI__FUNC_URXD0 (MTK_PIN_NO(154) | 3)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO0_DO0 (MTK_PIN_NO(154) | 4)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO1_DO (MTK_PIN_NO(154) | 5)
+#define MT2712_PIN_154_SPI0_MI__FUNC_TDMO0_DATA (MTK_PIN_NO(154) | 6)
+#define MT2712_PIN_154_SPI0_MI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(154) | 7)
+
+#define MT2712_PIN_155_SPI0_CK__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT2712_PIN_155_SPI0_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(155) | 1)
+#define MT2712_PIN_155_SPI0_CK__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(155) | 2)
+#define MT2712_PIN_155_SPI0_CK__FUNC_UTXD1 (MTK_PIN_NO(155) | 3)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(155) | 4)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO1_BCK (MTK_PIN_NO(155) | 5)
+#define MT2712_PIN_155_SPI0_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(155) | 6)
+#define MT2712_PIN_155_SPI0_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(155) | 7)
+
+#define MT2712_PIN_156_SPI0_MO__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT2712_PIN_156_SPI0_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(156) | 1)
+#define MT2712_PIN_156_SPI0_MO__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(156) | 2)
+#define MT2712_PIN_156_SPI0_MO__FUNC_URXD1 (MTK_PIN_NO(156) | 3)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO0_WS (MTK_PIN_NO(156) | 4)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO1_WS (MTK_PIN_NO(156) | 5)
+#define MT2712_PIN_156_SPI0_MO__FUNC_TDMO0_LRCK (MTK_PIN_NO(156) | 6)
+#define MT2712_PIN_156_SPI0_MO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(156) | 7)
+
+#define MT2712_PIN_157_SPI5_CSN__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_SPI_CS_5_ (MTK_PIN_NO(157) | 1)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(157) | 2)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_UTXD2 (MTK_PIN_NO(157) | 3)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(157) | 4)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO1_MCK (MTK_PIN_NO(157) | 5)
+#define MT2712_PIN_157_SPI5_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(157) | 6)
+
+#define MT2712_PIN_158_SPI5_MI__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT2712_PIN_158_SPI5_MI__FUNC_SPI_MI_5_ (MTK_PIN_NO(158) | 1)
+#define MT2712_PIN_158_SPI5_MI__FUNC_DSIA_TE (MTK_PIN_NO(158) | 2)
+#define MT2712_PIN_158_SPI5_MI__FUNC_URXD2 (MTK_PIN_NO(158) | 3)
+
+#define MT2712_PIN_159_SPI5_MO__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT2712_PIN_159_SPI5_MO__FUNC_SPI_MO_5_ (MTK_PIN_NO(159) | 1)
+#define MT2712_PIN_159_SPI5_MO__FUNC_DSIB_TE (MTK_PIN_NO(159) | 2)
+#define MT2712_PIN_159_SPI5_MO__FUNC_UTXD3 (MTK_PIN_NO(159) | 3)
+
+#define MT2712_PIN_160_SPI5_CK__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT2712_PIN_160_SPI5_CK__FUNC_SPI_CK_5_ (MTK_PIN_NO(160) | 1)
+#define MT2712_PIN_160_SPI5_CK__FUNC_LCM_RST1 (MTK_PIN_NO(160) | 2)
+#define MT2712_PIN_160_SPI5_CK__FUNC_URXD3 (MTK_PIN_NO(160) | 3)
+
+#define MT2712_PIN_161_SPI1_CSN__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(161) | 1)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(161) | 2)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(161) | 4)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO2_DO (MTK_PIN_NO(161) | 5)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(161) | 6)
+#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(161) | 7)
+
+#define MT2712_PIN_162_SPI1_SI__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_SI_1_ (MTK_PIN_NO(162) | 1)
+#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_MI_4_ (MTK_PIN_NO(162) | 2)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(162) | 4)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO2_BCK (MTK_PIN_NO(162) | 5)
+#define MT2712_PIN_162_SPI1_SI__FUNC_TDMO0_DATA (MTK_PIN_NO(162) | 6)
+#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO0_DO0 (MTK_PIN_NO(162) | 7)
+
+#define MT2712_PIN_163_SPI1_CK__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(163) | 1)
+#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(163) | 2)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(163) | 4)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO2_WS (MTK_PIN_NO(163) | 5)
+#define MT2712_PIN_163_SPI1_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(163) | 6)
+#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(163) | 7)
+
+#define MT2712_PIN_164_SPI1_SO__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_SO_1_ (MTK_PIN_NO(164) | 1)
+#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_MO_4_ (MTK_PIN_NO(164) | 2)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(164) | 4)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO2_MCK (MTK_PIN_NO(164) | 5)
+#define MT2712_PIN_164_SPI1_SO__FUNC_TDMO0_LRCK (MTK_PIN_NO(164) | 6)
+#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO0_WS (MTK_PIN_NO(164) | 7)
+
+#define MT2712_PIN_165_SPI4_CSN__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(165) | 1)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(165) | 2)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(165) | 3)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_UTXD4 (MTK_PIN_NO(165) | 4)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO1_DO (MTK_PIN_NO(165) | 5)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(165) | 6)
+#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(165) | 7)
+
+#define MT2712_PIN_166_SPI4_MI__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_MI_4_ (MTK_PIN_NO(166) | 1)
+#define MT2712_PIN_166_SPI4_MI__FUNC_DSIA_TE (MTK_PIN_NO(166) | 2)
+#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(166) | 3)
+#define MT2712_PIN_166_SPI4_MI__FUNC_URXD4 (MTK_PIN_NO(166) | 4)
+#define MT2712_PIN_166_SPI4_MI__FUNC_I2SO1_BCK (MTK_PIN_NO(166) | 5)
+
+#define MT2712_PIN_167_SPI4_MO__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_MO_4_ (MTK_PIN_NO(167) | 1)
+#define MT2712_PIN_167_SPI4_MO__FUNC_DSIB_TE (MTK_PIN_NO(167) | 2)
+#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(167) | 3)
+#define MT2712_PIN_167_SPI4_MO__FUNC_UTXD5 (MTK_PIN_NO(167) | 4)
+#define MT2712_PIN_167_SPI4_MO__FUNC_I2SO1_WS (MTK_PIN_NO(167) | 5)
+
+#define MT2712_PIN_168_SPI4_CK__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(168) | 1)
+#define MT2712_PIN_168_SPI4_CK__FUNC_LCM_RST1 (MTK_PIN_NO(168) | 2)
+#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(168) | 3)
+#define MT2712_PIN_168_SPI4_CK__FUNC_URXD5 (MTK_PIN_NO(168) | 4)
+#define MT2712_PIN_168_SPI4_CK__FUNC_I2SO1_MCK (MTK_PIN_NO(168) | 5)
+
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(169) | 1)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(169) | 2)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(169) | 3)
+#define MT2712_PIN_169_I2SI0_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(169) | 4)
+
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(170) | 1)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(170) | 2)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(170) | 3)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(170) | 4)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(170) | 5)
+#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(170) | 6)
+
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(171) | 1)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(171) | 2)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(171) | 3)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(171) | 4)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(171) | 5)
+#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(171) | 6)
+
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(172) | 1)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(172) | 2)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(172) | 3)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(172) | 4)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(172) | 5)
+#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(172) | 6)
+
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(173) | 1)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(173) | 2)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(173) | 3)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DI (MTK_PIN_NO(173) | 4)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(173) | 5)
+#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DO (MTK_PIN_NO(173) | 6)
+
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(174) | 1)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(174) | 2)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(174) | 3)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(174) | 4)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(174) | 5)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(174) | 6)
+#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(174) | 7)
+
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(175) | 1)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(175) | 2)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(175) | 3)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(175) | 4)
+#define MT2712_PIN_175_I2SI2_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(175) | 5)
+
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(176) | 1)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(176) | 2)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(176) | 3)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(176) | 4)
+#define MT2712_PIN_176_I2SI2_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(176) | 5)
+
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(177) | 1)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(177) | 2)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(177) | 3)
+#define MT2712_PIN_177_I2SI1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(177) | 4)
+
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(178) | 1)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(178) | 2)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(178) | 3)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(178) | 4)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(178) | 5)
+#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(178) | 6)
+
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(179) | 1)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(179) | 2)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(179) | 3)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(179) | 4)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(179) | 5)
+#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(179) | 6)
+
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(180) | 1)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(180) | 2)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(180) | 3)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(180) | 4)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(180) | 5)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(180) | 6)
+#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2S_IQ2_SDIB (MTK_PIN_NO(180) | 7)
+
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(181) | 1)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(181) | 2)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(181) | 3)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_DAI_TX (MTK_PIN_NO(181) | 4)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_TDMIN_MCLK (MTK_PIN_NO(181) | 5)
+#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2S_IQ2_SDIA (MTK_PIN_NO(181) | 7)
+
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(182) | 1)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(182) | 2)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(182) | 3)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_DAI_SYNC (MTK_PIN_NO(182) | 4)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(182) | 5)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(182) | 6)
+#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2S_IQ2_BCK (MTK_PIN_NO(182) | 7)
+
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(183) | 1)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(183) | 2)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(183) | 3)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_DAI_CLK (MTK_PIN_NO(183) | 4)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMIN_DI (MTK_PIN_NO(183) | 5)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(183) | 6)
+#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2S_IQ2_WS (MTK_PIN_NO(183) | 7)
+
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(184) | 1)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(184) | 2)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(184) | 3)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_DAI_RX (MTK_PIN_NO(184) | 4)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMIN_LRCK (MTK_PIN_NO(184) | 5)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(184) | 6)
+#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2S_IQ2_SDQA (MTK_PIN_NO(184) | 7)
+
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(185) | 1)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(185) | 2)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SO1_DO (MTK_PIN_NO(185) | 3)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SI2_DI (MTK_PIN_NO(185) | 4)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_MRG_RX (MTK_PIN_NO(185) | 5)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_PCM1_DI (MTK_PIN_NO(185) | 6)
+#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(185) | 7)
+
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(186) | 1)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(186) | 2)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SO0_DO1 (MTK_PIN_NO(186) | 3)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SI1_DI (MTK_PIN_NO(186) | 4)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_MRG_TX (MTK_PIN_NO(186) | 5)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_PCM1_DO (MTK_PIN_NO(186) | 6)
+#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(186) | 7)
+
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(187) | 1)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(187) | 2)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(187) | 3)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(187) | 4)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(187) | 5)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(187) | 6)
+#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2S_IQ0_BCK (MTK_PIN_NO(187) | 7)
+
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(188) | 1)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(188) | 2)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(188) | 3)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(188) | 4)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_MRG_CLK (MTK_PIN_NO(188) | 5)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(188) | 6)
+#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2S_IQ0_WS (MTK_PIN_NO(188) | 7)
+
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(189) | 1)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(189) | 2)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(189) | 3)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(189) | 4)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_MRG_RX (MTK_PIN_NO(189) | 5)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(189) | 6)
+#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2S_IQ0_SDQA (MTK_PIN_NO(189) | 7)
+
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(190) | 1)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(190) | 2)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(190) | 3)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DI (MTK_PIN_NO(190) | 4)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_MRG_TX (MTK_PIN_NO(190) | 5)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DO (MTK_PIN_NO(190) | 6)
+#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2S_IQ0_SDIA (MTK_PIN_NO(190) | 7)
+
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SO0_DO1 (MTK_PIN_NO(191) | 1)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI0_DI (MTK_PIN_NO(191) | 2)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI1_DI (MTK_PIN_NO(191) | 3)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI2_DI (MTK_PIN_NO(191) | 4)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_DAI_TX (MTK_PIN_NO(191) | 5)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(191) | 6)
+#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ1_SDQB (MTK_PIN_NO(191) | 7)
+
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(192) | 1)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(192) | 2)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(192) | 3)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_USB4_FT_SCL (MTK_PIN_NO(192) | 4)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(192) | 5)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(192) | 6)
+#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ1_SDQA (MTK_PIN_NO(192) | 7)
+
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(193) | 1)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(193) | 2)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(193) | 3)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_USB4_FT_SDA (MTK_PIN_NO(193) | 4)
+#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2S_IQ1_SDIA (MTK_PIN_NO(193) | 7)
+
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(194) | 1)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(194) | 2)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(194) | 3)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_USB5_FT_SCL (MTK_PIN_NO(194) | 4)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(194) | 5)
+#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2S_IQ1_WS (MTK_PIN_NO(194) | 7)
+
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(195) | 1)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(195) | 2)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(195) | 3)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_USB5_FT_SDA (MTK_PIN_NO(195) | 4)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(195) | 5)
+#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2S_IQ1_BCK (MTK_PIN_NO(195) | 7)
+
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO1_MCLK (MTK_PIN_NO(196) | 1)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO0_MCLK (MTK_PIN_NO(196) | 2)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(196) | 3)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2SO0_DO1 (MTK_PIN_NO(196) | 6)
+#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(196) | 7)
+
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_LRCK (MTK_PIN_NO(197) | 1)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_LRCK (MTK_PIN_NO(197) | 2)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(197) | 3)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(197) | 4)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(197) | 5)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_I2SO3_MCK (MTK_PIN_NO(197) | 6)
+#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(197) | 7)
+
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_BCK (MTK_PIN_NO(198) | 1)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_BCK (MTK_PIN_NO(198) | 2)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(198) | 3)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(198) | 4)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(198) | 5)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_I2SO3_BCK (MTK_PIN_NO(198) | 6)
+#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(198) | 7)
+
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA (MTK_PIN_NO(199) | 1)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA (MTK_PIN_NO(199) | 2)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(199) | 3)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(199) | 4)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(199) | 5)
+#define MT2712_PIN_199_TDMO1_DATA__FUNC_I2SO3_WS (MTK_PIN_NO(199) | 6)
+
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK0 (MTK_PIN_NO(200) | 1)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK0 (MTK_PIN_NO(200) | 2)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(200) | 3)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK1 (MTK_PIN_NO(200) | 4)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK1 (MTK_PIN_NO(200) | 5)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_MRG_TX (MTK_PIN_NO(200) | 6)
+#define MT2712_PIN_200_TDMO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(200) | 7)
+
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK0 (MTK_PIN_NO(201) | 1)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK0 (MTK_PIN_NO(201) | 2)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(201) | 3)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK1 (MTK_PIN_NO(201) | 4)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK1 (MTK_PIN_NO(201) | 5)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_MRG_RX (MTK_PIN_NO(201) | 6)
+#define MT2712_PIN_201_TDMO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(201) | 7)
+
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK0 (MTK_PIN_NO(202) | 1)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK0 (MTK_PIN_NO(202) | 2)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(202) | 3)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK1 (MTK_PIN_NO(202) | 4)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK1 (MTK_PIN_NO(202) | 5)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(202) | 6)
+#define MT2712_PIN_202_TDMO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(202) | 7)
+
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA0 (MTK_PIN_NO(203) | 1)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA0 (MTK_PIN_NO(203) | 2)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_PCM1_DO (MTK_PIN_NO(203) | 3)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(203) | 4)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(203) | 5)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_MRG_CLK (MTK_PIN_NO(203) | 6)
+#define MT2712_PIN_203_TDMO0_DATA__FUNC_I2SO2_DO (MTK_PIN_NO(203) | 7)
+
+#define MT2712_PIN_204_PERSTB_P0__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2712_PIN_204_PERSTB_P0__FUNC_PERST_B_P0 (MTK_PIN_NO(204) | 1)
+
+#define MT2712_PIN_205_CLKREQN_P0__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2712_PIN_205_CLKREQN_P0__FUNC_CLKREQ_N_P0 (MTK_PIN_NO(205) | 1)
+
+#define MT2712_PIN_206_WAKEEN_P0__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2712_PIN_206_WAKEEN_P0__FUNC_WAKE_EN_P0 (MTK_PIN_NO(206) | 1)
+
+#define MT2712_PIN_207_PERSTB_P1__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2712_PIN_207_PERSTB_P1__FUNC_PERST_B_P1 (MTK_PIN_NO(207) | 1)
+
+#define MT2712_PIN_208_CLKREQN_P1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2712_PIN_208_CLKREQN_P1__FUNC_CLKREQ_N_P1 (MTK_PIN_NO(208) | 1)
+
+#define MT2712_PIN_209_WAKEEN_P1__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2712_PIN_209_WAKEEN_P1__FUNC_WAKE_EN_P1 (MTK_PIN_NO(209) | 1)
+
+#endif /* __DTS_MT2712_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
new file mode 100644
index 000000000..ed1a9d319
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -0,0 +1,1135 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: YT Shen <yt.shen@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/clock/mt2712-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt2712-larb-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt2712-power.h>
+#include "mt2712-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt2712";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <897000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x000>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				<&topckgen CLK_TOP_F_MP0_PLL1>;
+			clock-names = "cpu", "intermediate";
+			proc-supply = <&cpus_fixed_vproc0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x001>;
+			enable-method = "psci";
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				<&topckgen CLK_TOP_F_MP0_PLL1>;
+			clock-names = "cpu", "intermediate";
+			proc-supply = <&cpus_fixed_vproc0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				<&topckgen CLK_TOP_F_BIG_PLL1>;
+			clock-names = "cpu", "intermediate";
+			proc-supply = <&cpus_fixed_vproc1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <80>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <350>;
+				exit-latency-us = <80>;
+				min-residency-us = <3000>;
+				arm,psci-suspend-param = <0x1010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	baud_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	sys_clk: dummyclk {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	clkfpc: oscillator-50m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "clkfpc";
+	};
+
+	clkaud_ext_i_0: oscillator-aud0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <6500000>;
+		clock-output-names = "clkaud_ext_i_0";
+	};
+
+	clkaud_ext_i_1: oscillator-aud1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <196608000>;
+		clock-output-names = "clkaud_ext_i_1";
+	};
+
+	clkaud_ext_i_2: oscillator-aud2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <180633600>;
+		clock-output-names = "clkaud_ext_i_2";
+	};
+
+	clki2si0_mck_i: oscillator-i2s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si0_mck_i";
+	};
+
+	clki2si1_mck_i: oscillator-i2s1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si1_mck_i";
+	};
+
+	clki2si2_mck_i: oscillator-i2s2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clki2si2_mck_i";
+	};
+
+	clktdmin_mclk_i: oscillator-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <30000000>;
+		clock-output-names = "clktdmin_mclk_i";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			      (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	topckgen: syscon@10000000 {
+		compatible = "mediatek,mt2712-topckgen", "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infracfg: syscon@10001000 {
+		compatible = "mediatek,mt2712-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pericfg: syscon@10003000 {
+		compatible = "mediatek,mt2712-pericfg", "syscon";
+		reg = <0 0x10003000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	syscfg_pctl_a: syscfg_pctl_a@10005000 {
+		compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
+	pio: pinctrl@1000b000 {
+		compatible = "mediatek,mt2712-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt2712-scpsys", "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		clocks = <&topckgen CLK_TOP_MM_SEL>,
+			 <&topckgen CLK_TOP_MFG_SEL>,
+			 <&topckgen CLK_TOP_VENC_SEL>,
+			 <&topckgen CLK_TOP_JPGDEC_SEL>,
+			 <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+			 <&topckgen CLK_TOP_VDEC_SEL>;
+		clock-names = "mm", "mfg", "venc",
+			"jpgdec", "audio", "vdec";
+		infracfg = <&infracfg>;
+	};
+
+	uart5: serial@1000f000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x1000f000 0 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 10
+			&apdma 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	rtc: rtc@10011000 {
+		compatible = "mediatek,mt2712-rtc";
+		reg = <0 0x10011000 0 0x1000>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	spis1: spi@10013000 {
+		compatible = "mediatek,mt2712-spi-slave";
+		reg = <0 0x10013000 0 0x100>;
+		interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+		clock-names = "spi";
+		assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+		status = "disabled";
+	};
+
+	iommu0: iommu@10205000 {
+		compatible = "mediatek,mt2712-m4u";
+		reg = <0 0x10205000 0 0x1000>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,infracfg = <&infracfg>;
+		mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+				 <&larb3>, <&larb6>;
+		#iommu-cells = <1>;
+	};
+
+	apmixedsys: syscon@10209000 {
+		compatible = "mediatek,mt2712-apmixedsys", "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	iommu1: iommu@1020a000 {
+		compatible = "mediatek,mt2712-m4u";
+		reg = <0 0x1020a000 0 0x1000>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_M4U>;
+		clock-names = "bclk";
+		mediatek,infracfg = <&infracfg>;
+		mediatek,larbs = <&larb4>, <&larb5>, <&larb7>;
+		#iommu-cells = <1>;
+	};
+
+	mcucfg: syscon@10220000 {
+		compatible = "mediatek,mt2712-mcucfg", "syscon";
+		reg = <0 0x10220000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sysirq: interrupt-controller@10220a80 {
+		compatible = "mediatek,mt2712-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10220a80 0 0x40>;
+	};
+
+	gic: interrupt-controller@10510000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10510000 0 0x10000>,
+		      <0 0x10520000 0 0x20000>,
+		      <0 0x10540000 0 0x20000>,
+		      <0 0x10560000 0 0x20000>;
+		interrupts = <GIC_PPI 9
+			 (GIC_CPU_MASK_RAW(0x13) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	apdma: dma-controller@11000400 {
+		compatible = "mediatek,mt2712-uart-dma",
+			     "mediatek,mt6577-uart-dma";
+		reg = <0 0x11000400 0 0x80>,
+		      <0 0x11000480 0 0x80>,
+		      <0 0x11000500 0 0x80>,
+		      <0 0x11000580 0 0x80>,
+		      <0 0x11000600 0 0x80>,
+		      <0 0x11000680 0 0x80>,
+		      <0 0x11000700 0 0x80>,
+		      <0 0x11000780 0 0x80>,
+		      <0 0x11000800 0 0x80>,
+		      <0 0x11000880 0 0x80>,
+		      <0 0x11000900 0 0x80>,
+		      <0 0x11000980 0 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+		dma-requests = <12>;
+		clocks = <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "apdma";
+		#dma-cells = <1>;
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt2712-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 0
+			&apdma 1>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 2
+			&apdma 3>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 4
+			&apdma 5>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 6
+			&apdma 7>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt2712-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM>,
+			 <&pericfg CLK_PERI_PWM0>,
+			 <&pericfg CLK_PERI_PWM1>,
+			 <&pericfg CLK_PERI_PWM2>,
+			 <&pericfg CLK_PERI_PWM3>,
+			 <&pericfg CLK_PERI_PWM4>,
+			 <&pericfg CLK_PERI_PWM5>,
+			 <&pericfg CLK_PERI_PWM6>,
+			 <&pericfg CLK_PERI_PWM7>;
+		clock-names = "top",
+			      "main",
+			      "pwm1",
+			      "pwm2",
+			      "pwm3",
+			      "pwm4",
+			      "pwm5",
+			      "pwm6",
+			      "pwm7",
+			      "pwm8";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11007000 0 0x90>,
+		      <0 0x11000180 0 0x80>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C0>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11008000 0 0x90>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C1>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11009000 0 0x90>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C2>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	nandc: nand-controller@1100e000 {
+		compatible = "mediatek,mt2712-nfc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_NFI2X_EN>, <&pericfg CLK_PERI_NFI>;
+		clock-names = "nfi_clk", "pad_clk";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bch: ecc@1100f000 {
+		compatible = "mediatek,mt2712-ecc";
+		reg = <0 0x1100f000 0 0x1000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_NFI1X_CK_EN>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	i2c3: i2c@11010000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11010000 0 0x90>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C3>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@11011000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11011000 0 0x90>,
+		      <0 0x11000380 0 0x80>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C4>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@11013000 {
+		compatible = "mediatek,mt2712-i2c";
+		reg = <0 0x11013000 0 0x90>,
+		      <0 0x11000100 0 0x80>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <4>;
+		clocks = <&pericfg CLK_PERI_I2C5>,
+			 <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main",
+			      "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@11015000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11015000 0 0x100>;
+		interrupts = <GIC_SPI 284 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI2>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi3: spi@11016000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI3>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi4: spi@10012000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x10012000 0 0x100>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&infracfg CLK_INFRA_AO_SPI0>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	spi5: spi@11018000 {
+		compatible = "mediatek,mt2712-spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0 0x11018000 0 0x100>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+			 <&topckgen CLK_TOP_SPI_SEL>,
+			 <&pericfg CLK_PERI_SPI5>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		status = "disabled";
+	};
+
+	uart4: serial@11019000 {
+		compatible = "mediatek,mt2712-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11019000 0 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&baud_clk>, <&sys_clk>;
+		clock-names = "baud", "bus";
+		dmas = <&apdma 8
+			&apdma 9>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <0x7>;
+		snps,rd_osr_lmt = <0x7>;
+		snps,blen = <0 0 0 0 16 8 4>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,priority = <0x0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <3>;
+		snps,tx-sched-wrr;
+		queue0 {
+			snps,weight = <0x10>;
+			snps,dcb-algorithm;
+			snps,priority = <0x0>;
+		};
+		queue1 {
+			snps,weight = <0x11>;
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+		queue2 {
+			snps,weight = <0x12>;
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+	};
+
+	eth: ethernet@1101c000 {
+		compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+		reg = <0 0x1101c000 0 0x1300>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "macirq";
+		mac-address = [00 55 7b b5 7d f7];
+		clock-names = "axi",
+			      "apb",
+			      "mac_main",
+			      "ptp_ref",
+			      "rmii_internal";
+		clocks = <&pericfg CLK_PERI_GMAC>,
+			 <&pericfg CLK_PERI_GMAC_PCLK>,
+			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
+				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+					 <&topckgen CLK_TOP_APLL1_D3>,
+					 <&topckgen CLK_TOP_ETHERPLL_50M>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+		mediatek,pericfg = <&pericfg>;
+		snps,axi-config = <&stmmac_axi_setup>;
+		snps,mtl-rx-config = <&mtl_rx_setup>;
+		snps,mtl-tx-config = <&mtl_tx_setup>;
+		snps,txpbl = <1>;
+		snps,rxpbl = <1>;
+		snps,clk-csr = <0>;
+		status = "disabled";
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt2712-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0>,
+			 <&pericfg CLK_PERI_MSDC50_0_HCLK_EN>,
+			 <&pericfg CLK_PERI_MSDC50_0_EN>,
+			 <&pericfg CLK_PERI_MSDC30_0_QTR_EN>;
+		clock-names = "source", "hclk", "source_cg", "bus_clk";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt2712-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1>,
+			 <&topckgen CLK_TOP_AXI_SEL>,
+			 <&pericfg CLK_PERI_MSDC30_1_EN>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	mmc2: mmc@11250000 {
+		compatible = "mediatek,mt2712-mmc";
+		reg = <0 0x11250000 0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_2>,
+			 <&topckgen CLK_TOP_AXI_SEL>,
+			 <&pericfg CLK_PERI_MSDC30_2_EN>;
+		clock-names = "source", "hclk", "source_cg";
+		status = "disabled";
+	};
+
+	ssusb: usb@11271000 {
+		compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+		reg = <0 0x11271000 0 0x3000>,
+		      <0 0x11280700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+		phys = <&u2port0 PHY_TYPE_USB2>,
+		       <&u2port1 PHY_TYPE_USB2>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+		clocks = <&topckgen CLK_TOP_USB30_SEL>;
+		clock-names = "sys_ck";
+		mediatek,syscon-wakeup = <&pericfg 0x510 2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb_host0: usb@11270000 {
+			compatible = "mediatek,mt2712-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11270000 0 0x1000>;
+			reg-names = "mac";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+			clock-names = "sys_ck", "ref_ck";
+			status = "disabled";
+		};
+	};
+
+	u3phy0: t-phy@11290000 {
+		compatible = "mediatek,mt2712-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x11290000 0x9000>;
+		status = "okay";
+
+		u2port0: usb-phy@0 {
+			reg = <0x0 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u2port1: usb-phy@8000 {
+			reg = <0x8000 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port0: usb-phy@8700 {
+			reg = <0x8700 0x900>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	ssusb1: usb@112c1000 {
+		compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
+		reg = <0 0x112c1000 0 0x3000>,
+		      <0 0x112d0700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
+		phys = <&u2port2 PHY_TYPE_USB2>,
+		       <&u2port3 PHY_TYPE_USB2>,
+		       <&u3port1 PHY_TYPE_USB3>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+		clocks = <&topckgen CLK_TOP_USB30_SEL>;
+		clock-names = "sys_ck";
+		mediatek,syscon-wakeup = <&pericfg 0x514 2>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb_host1: usb@112c0000 {
+			compatible = "mediatek,mt2712-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112c0000 0 0x1000>;
+			reg-names = "mac";
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+			clock-names = "sys_ck", "ref_ck";
+			status = "disabled";
+		};
+	};
+
+	u3phy1: t-phy@112e0000 {
+		compatible = "mediatek,mt2712-tphy",
+			     "mediatek,generic-tphy-v2";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x112e0000 0x9000>;
+		status = "okay";
+
+		u2port2: usb-phy@0 {
+			reg = <0x0 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u2port3: usb-phy@8000 {
+			reg = <0x8000 0x700>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+
+		u3port1: usb-phy@8700 {
+			reg = <0x8700 0x900>;
+			clocks = <&clk26m>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	pcie1: pcie@112ff000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+			 <&pericfg CLK_PERI_PCIE1>;
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	mfgcfg: syscon@13000000 {
+		compatible = "mediatek,mt2712-mfgcfg", "syscon";
+		reg = <0 0x13000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt2712-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb0: larb@14021000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14021000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <0>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB0>,
+			 <&mmsys CLK_MM_SMI_LARB0>;
+		clock-names = "apb", "smi";
+	};
+
+	smi_common0: smi@14022000 {
+		compatible = "mediatek,mt2712-smi-common";
+		reg = <0 0x14022000 0 0x1000>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_COMMON>,
+			 <&mmsys CLK_MM_SMI_COMMON>;
+		clock-names = "apb", "smi";
+	};
+
+	larb4: larb@14027000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14027000 0 0x1000>;
+		mediatek,smi = <&smi_common1>;
+		mediatek,larb-id = <4>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB4>,
+			 <&mmsys CLK_MM_SMI_LARB4>;
+		clock-names = "apb", "smi";
+	};
+
+	larb5: larb@14030000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14030000 0 0x1000>;
+		mediatek,smi = <&smi_common1>;
+		mediatek,larb-id = <5>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB5>,
+			 <&mmsys CLK_MM_SMI_LARB5>;
+		clock-names = "apb", "smi";
+	};
+
+	smi_common1: smi@14031000 {
+		compatible = "mediatek,mt2712-smi-common";
+		reg = <0 0x14031000 0 0x1000>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_COMMON1>,
+			 <&mmsys CLK_MM_SMI_COMMON1>;
+		clock-names = "apb", "smi";
+	};
+
+	larb7: larb@14032000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x14032000 0 0x1000>;
+		mediatek,smi = <&smi_common1>;
+		mediatek,larb-id = <7>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_MM>;
+		clocks = <&mmsys CLK_MM_SMI_LARB7>,
+			 <&mmsys CLK_MM_SMI_LARB7>;
+		clock-names = "apb", "smi";
+	};
+
+	imgsys: syscon@15000000 {
+		compatible = "mediatek,mt2712-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb2: larb@15001000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x15001000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <2>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_ISP>;
+		clocks = <&imgsys CLK_IMG_SMI_LARB2>,
+			 <&imgsys CLK_IMG_SMI_LARB2>;
+		clock-names = "apb", "smi";
+	};
+
+	bdpsys: syscon@15010000 {
+		compatible = "mediatek,mt2712-bdpsys", "syscon";
+		reg = <0 0x15010000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	vdecsys: syscon@16000000 {
+		compatible = "mediatek,mt2712-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb1: larb@16010000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <1>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_VDEC>;
+		clocks = <&vdecsys CLK_VDEC_CKEN>,
+			 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+		clock-names = "apb", "smi";
+	};
+
+	vencsys: syscon@18000000 {
+		compatible = "mediatek,mt2712-vencsys", "syscon";
+		reg = <0 0x18000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	larb3: larb@18001000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x18001000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <3>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
+		clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
+			 <&vencsys CLK_VENC_VENC>;
+		clock-names = "apb", "smi";
+	};
+
+	larb6: larb@18002000 {
+		compatible = "mediatek,mt2712-smi-larb";
+		reg = <0 0x18002000 0 0x1000>;
+		mediatek,smi = <&smi_common0>;
+		mediatek,larb-id = <6>;
+		power-domains = <&scpsys MT2712_POWER_DOMAIN_VENC>;
+		clocks = <&vencsys CLK_VENC_SMI_COMMON_CON>,
+			 <&vencsys CLK_VENC_VENC>;
+		clock-names = "apb", "smi";
+	};
+
+	jpgdecsys: syscon@19000000 {
+		compatible = "mediatek,mt2712-jpgdecsys", "syscon";
+		reg = <0 0x19000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
new file mode 100644
index 000000000..d89858c73
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2023 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	pmic: mt6331 {
+		compatible = "mediatek,mt6331";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6331regulator: mt6331regulator {
+			compatible = "mediatek,mt6331-regulator";
+
+			mt6331_vdvfs11_reg: buck-vdvfs11 {
+				regulator-name = "vdvfs11";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs12_reg: buck-vdvfs12 {
+				regulator-name = "vdvfs12";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs13_reg: buck-vdvfs13 {
+				regulator-name = "vdvfs13";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vdvfs14_reg: buck-vdvfs14 {
+				regulator-name = "vdvfs14";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vcore2_reg: buck-vcore2 {
+				regulator-name = "vcore2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1493750>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vio18_reg: buck-vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-allowed-modes = <0 1>;
+				regulator-always-on;
+			};
+
+			mt6331_vtcxo1_reg: ldo-vtcxo1 {
+				regulator-name = "vtcxo1";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vtcxo2_reg: ldo-vtcxo2 {
+				regulator-name = "vtcxo2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_avdd32_aud_reg: ldo-avdd32aud {
+				regulator-name = "avdd32_aud";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vauxa32_reg: ldo-vauxa32 {
+				regulator-name = "vauxa32";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3200000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vio28_reg: ldo-vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vcamaf_reg: ldo-vcamaf {
+				regulator-name = "vcam_af";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vemc33_reg: ldo-vemc33 {
+				regulator-name = "vemc33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vgp1_reg: ldo-vgp1 {
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vmipi_reg: ldo-vmipi {
+				regulator-name = "vmipi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vgp4_reg: ldo-vgp4 {
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vusb10_reg: ldo-vusb10 {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vcamio_reg: ldo-vcamio {
+				regulator-name = "vcam_io";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+			};
+
+			mt6331_vsram_reg: ldo-vsram {
+				regulator-name = "vsram";
+				regulator-min-microvolt = <1012500>;
+				regulator-max-microvolt = <1012500>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vgp2_reg: ldo-vgp2 {
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6331_vgp3_reg: ldo-vgp3 {
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vrtc_reg: ldo-vrtc {
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6331_vdig18_reg: ldo-vdig18 {
+				regulator-name = "dvdd18_dig";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <0>;
+				regulator-always-on;
+			};
+		};
+
+		mt6331rtc: mt6331rtc {
+			compatible = "mediatek,mt6331-rtc";
+		};
+
+		mt6331keys: mt6331keys {
+			compatible = "mediatek,mt6331-keys";
+			power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+			home {
+				linux,keycodes = <KEY_HOME>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
new file mode 100644
index 000000000..3330a03c2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2023 BayLibre Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	mt6357_pmic: pmic {
+		compatible = "mediatek,mt6357";
+
+		regulators {
+			mt6357_vproc_reg: buck-vproc {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vcore_reg: buck-vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vmodem_reg: buck-vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vs1_reg: buck-vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vpa_reg: buck-vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vfe28_reg: ldo-vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vxo22_reg: ldo-vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf18_reg: ldo-vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf12_reg: ldo-vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vefuse_reg: ldo-vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+				regulator-name = "vcn33-bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+				regulator-name = "vcn33-wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn28_reg: ldo-vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn18_reg: ldo-vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamio_reg: ldo-vcamio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vldo28_reg: ldo-vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsram_others_reg: ldo-vsram-others {
+				regulator-name = "vsram-others";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vsram_proc_reg: ldo-vsram-proc {
+				regulator-name = "vsram-proc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vaux18_reg: ldo-vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vaud28_reg: ldo-vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio28_reg: ldo-vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio18_reg: ldo-vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+			};
+
+			mt6357_vdram_reg: ldo-vdram {
+				regulator-name = "vdram";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6357_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vemc_reg: ldo-vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+				regulator-always-on;
+			};
+
+			mt6357_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vusb33_reg: ldo-vusb33 {
+				regulator-name = "vusb33";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+		};
+
+		rtc {
+			compatible = "mediatek,mt6357-rtc";
+		};
+
+		keys {
+			compatible = "mediatek,mt6357-keys";
+
+			key-power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+
+			key-home {
+				linux,keycodes = <KEY_HOME>;
+				wakeup-source;
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
new file mode 100644
index 000000000..b605313be
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6358";
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <182 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		mt6358codec: mt6358codec {
+			compatible = "mediatek,mt6358-sound";
+			mediatek,dmic-mode = <0>; /* two-wires */
+		};
+
+		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
+			mt6358_vdram1_reg: buck_vdram1 {
+				regulator-name = "vdram1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vcore_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vpa_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <250>;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vproc11_reg: buck_vproc11 {
+				regulator-name = "vproc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vproc12_reg: buck_vproc12 {
+				regulator-name = "vproc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vgpu_reg: buck_vgpu {
+				regulator-name = "vgpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vs2_reg: buck_vs2 {
+				regulator-name = "vs2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2087500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vmodem_reg: buck_vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <900>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6358_vs1_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <2587500>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+
+			mt6358_vdram2_reg: ldo_vdram2 {
+				regulator-name = "vdram2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6358_vsim1_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+
+			mt6358_vibr_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vrf12_reg: ldo_vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vio18_reg: ldo_vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <2700>;
+				regulator-always-on;
+			};
+
+			mt6358_vusb_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vcamio_reg: ldo_vcamio {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vcamd_reg: ldo_vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vcn18_reg: ldo_vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vfe28_reg: ldo_vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc11_reg: ldo_vsram_proc11 {
+				regulator-name = "vsram_proc11";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcn28_reg: ldo_vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_others_reg: ldo_vsram_others {
+				regulator-name = "vsram_others";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vsram_gpu_reg: ldo_vsram_gpu {
+				regulator-name = "vsram_gpu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6358_vxo22_reg: ldo_vxo22 {
+				compatible = "regulator-fixed";
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <120>;
+				regulator-always-on;
+			};
+
+			mt6358_vefuse_reg: ldo_vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaux18_reg: ldo_vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vmch_reg: ldo_vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vbif28_reg: ldo_vbif28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsram_proc12_reg: ldo_vsram_proc12 {
+				regulator-name = "vsram_proc12";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+
+			mt6358_vcama1_reg: ldo_vcama1 {
+				regulator-name = "vcama1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vemc_reg: ldo_vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vio28_reg: ldo_vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_va12_reg: ldo_va12 {
+				compatible = "regulator-fixed";
+				regulator-name = "va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <270>;
+				regulator-always-on;
+			};
+
+			mt6358_vrf18_reg: ldo_vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+
+			mt6358_vcn33_bt_reg: ldo_vcn33_bt {
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcn33_wifi_reg: ldo_vcn33_wifi {
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vcama2_reg: ldo_vcama2 {
+				regulator-name = "vcama2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <325>;
+			};
+
+			mt6358_vmc_reg: ldo_vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <60>;
+			};
+
+			mt6358_vldo28_reg: ldo_vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vaud28_reg: ldo_vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <270>;
+			};
+
+			mt6358_vsim2_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <540>;
+			};
+		};
+
+		mt6358rtc: rtc {
+			compatible = "mediatek,mt6358-rtc";
+		};
+
+		mt6358keys: keys {
+			compatible = "mediatek,mt6358-keys";
+			power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+			home {
+				linux,keycodes = <KEY_HOME>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
new file mode 100644
index 000000000..df3e82223
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6359";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6359codec: mt6359codec {
+		};
+
+		regulators {
+			mt6359_vs1_buck_reg: buck_vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+			mt6359_vgpu11_buck_reg: buck_vgpu11 {
+				regulator-name = "vgpu11";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vmodem_buck_reg: buck_vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <10760>;
+				regulator-enable-ramp-delay = <200>;
+			};
+			mt6359_vpu_buck_reg: buck_vpu {
+				regulator-name = "vpu";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vcore_buck_reg: buck_vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vs2_buck_reg: buck_vs2 {
+				regulator-name = "vs2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1600000>;
+				regulator-enable-ramp-delay = <0>;
+				regulator-always-on;
+			};
+			mt6359_vpa_buck_reg: buck_vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-enable-ramp-delay = <300>;
+			};
+			mt6359_vproc2_buck_reg: buck_vproc2 {
+				regulator-name = "vproc2";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vproc1_buck_reg: buck_vproc1 {
+				regulator-name = "vproc1";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <200>;
+				regulator-allowed-modes = <0 1 2>;
+			};
+			mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
+				regulator-name = "vcore_sshub";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+			};
+			mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
+				regulator-name = "vgpu11_sshub";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1193750>;
+			};
+			mt6359_vaud18_ldo_reg: ldo_vaud18 {
+				regulator-name = "vaud18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vsim1_ldo_reg: ldo_vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+			};
+			mt6359_vibr_ldo_reg: ldo_vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			mt6359_vrf12_ldo_reg: ldo_vrf12 {
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+			};
+			mt6359_vusb_ldo_reg: ldo_vusb {
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <960>;
+				regulator-always-on;
+			};
+			mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+				regulator-name = "vsram_proc2";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+			mt6359_vio18_ldo_reg: ldo_vio18 {
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-enable-ramp-delay = <960>;
+				regulator-always-on;
+			};
+			mt6359_vcamio_ldo_reg: ldo_vcamio {
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+			};
+			mt6359_vcn18_ldo_reg: ldo_vcn18 {
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vfe28_ldo_reg: ldo_vfe28 {
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <120>;
+			};
+			mt6359_vcn13_ldo_reg: ldo_vcn13 {
+				regulator-name = "vcn13";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1300000>;
+			};
+			mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
+				regulator-name = "vcn33_1_bt";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
+				regulator-name = "vcn33_1_wifi";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_vaux18_ldo_reg: ldo_vaux18 {
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+			mt6359_vsram_others_ldo_reg: ldo_vsram_others {
+				regulator-name = "vsram_others";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <5000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vefuse_ldo_reg: ldo_vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+			};
+			mt6359_vxo22_ldo_reg: ldo_vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+			};
+			mt6359_vrfck_ldo_reg: ldo_vrfck {
+				regulator-name = "vrfck";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1700000>;
+			};
+			mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
+				regulator-name = "vrfck";
+				regulator-min-microvolt = <1240000>;
+				regulator-max-microvolt = <1600000>;
+			};
+			mt6359_vbif28_ldo_reg: ldo_vbif28 {
+				regulator-name = "vbif28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vio28_ldo_reg: ldo_vio28 {
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			mt6359_vemc_ldo_reg: ldo_vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
+				regulator-name = "vcn33_2_bt";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
+				regulator-name = "vcn33_2_wifi";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3500000>;
+			};
+			mt6359_va12_ldo_reg: ldo_va12 {
+				regulator-name = "va12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+			};
+			mt6359_va09_ldo_reg: ldo_va09 {
+				regulator-name = "va09";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+			};
+			mt6359_vrf18_ldo_reg: ldo_vrf18 {
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1810000>;
+			};
+			mt6359_vsram_md_ldo_reg: ldo_vsram_md {
+				regulator-name = "vsram_md";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <10760>;
+				regulator-enable-ramp-delay = <240>;
+			};
+			mt6359_vufs_ldo_reg: ldo_vufs {
+				regulator-name = "vufs";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+			};
+			mt6359_vm18_ldo_reg: ldo_vm18 {
+				regulator-name = "vm18";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-always-on;
+			};
+			mt6359_vbbck_ldo_reg: ldo_vbbck {
+				regulator-name = "vbbck";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+			};
+			mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
+				regulator-name = "vsram_proc1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+				regulator-ramp-delay = <7500>;
+				regulator-enable-ramp-delay = <240>;
+				regulator-always-on;
+			};
+			mt6359_vsim2_ldo_reg: ldo_vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+			};
+			mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
+				regulator-name = "vsram_others_sshub";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1293750>;
+			};
+		};
+
+		mt6359rtc: mt6359rtc {
+			compatible = "mediatek,mt6358-rtc";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6380.dtsi b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
new file mode 100644
index 000000000..53b335d2d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6380.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for MediaTek MT6380 regulator
+ *
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chenglin Xu <chenglin.xu@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ */
+
+&pwrap {
+	regulators {
+		compatible = "mediatek,mt6380-regulator";
+
+		mt6380_vcpu_reg: buck-vcore1 {
+			regulator-name = "vcore1";
+			regulator-min-microvolt = < 600000>;
+			regulator-max-microvolt = <1393750>;
+			regulator-ramp-delay = <6250>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vcore_reg: buck-vcore {
+			regulator-name = "vcore";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1393750>;
+			regulator-ramp-delay = <6250>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vrf_reg: buck-vrf {
+			regulator-name = "vrf";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1575000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vm_reg: ldo-vm {
+			regulator-name = "vm";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_va_reg: ldo-va {
+			regulator-name = "va";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vphy_reg: ldo-vphy {
+			regulator-name = "vphy";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vddr_reg: ldo-vddr {
+			regulator-name = "vddr";
+			regulator-min-microvolt = <1240000>;
+			regulator-max-microvolt = <1840000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		mt6380_vt_reg: ldo-vt {
+			regulator-name = "vt";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
new file mode 100644
index 000000000..00b14f85c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt6755.dtsi"
+
+/ {
+	model = "MediaTek MT6755 EVB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
new file mode 100644
index 000000000..b55d3fac9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt6755";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+		};
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6755-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	gic: interrupt-controller@10231000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		reg = <0 0x10231000 0 0x1000>,
+		      <0 0x10232000 0 0x2000>,
+		      <0 0x10234000 0 0x2000>,
+		      <0 0x10236000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6755-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
new file mode 100644
index 000000000..56b1bf06e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include "mt6779.dtsi"
+
+/ {
+	model = "MediaTek MT6779 EVB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
new file mode 100644
index 000000000..5c579e88e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ */
+
+#include <dt-bindings/clock/mt6779-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt6779";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x300>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x400>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			enable-method = "psci";
+			reg = <0x500>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x600>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			enable-method = "psci";
+			reg = <0x700>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c040000 0 0x200000>; /* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 \
+						&cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+
+		};
+
+		sysirq: intpol-controller@c53a650 {
+			compatible = "mediatek,mt6779-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c53a650 0 0x50>;
+		};
+
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt6779-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: clock-controller@10001000 {
+			compatible = "mediatek,mt6779-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt6779-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rm",
+				    "iocfg_br", "iocfg_lm",
+				    "iocfg_lb", "iocfg_rt",
+				    "iocfg_lt", "iocfg_tl",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 210>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixed: clock-controller@1000c000 {
+			compatible = "mediatek,mt6779-apmixed", "syscon";
+			reg = <0 0x1000c000 0 0xe00>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt6779-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_PMIC_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		devapc: devapc@10207000 {
+			compatible = "mediatek,mt6779-devapc";
+			reg = <0 0x10207000 0 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>;
+			clock-names = "devapc-infra-clock";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6779-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		audio: clock-controller@11210000 {
+			compatible = "mediatek,mt6779-audio", "syscon";
+			reg = <0 0x11210000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt6779-mfgcfg", "syscon";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6779-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys: clock-controller@15020000 {
+			compatible = "mediatek,mt6779-imgsys", "syscon";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6779-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt6779-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt6779-camsys", "syscon";
+			reg = <0 0x1a000000 0 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@1b000000 {
+			compatible = "mediatek,mt6779-ipesys", "syscon";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
new file mode 100644
index 000000000..e0d4d7a63
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt6795.dtsi"
+
+/ {
+	model = "MediaTek MT6795 Evaluation Board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
new file mode 100644
index 000000000..b5746e6d0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -0,0 +1,355 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Collabora Ltd
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt6795.dtsi"
+#include "mt6331.dtsi"
+
+/ {
+	model = "Sony Xperia M5";
+	compatible = "sony,xperia-m5", "mediatek,mt6795";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		/* preloader and bootloader regions cannot be touched */
+		preloader-region@44800000 {
+			reg = <0 0x44800000 0 0x100000>;
+			no-map;
+		};
+
+		bootloader-region@46000000 {
+			reg = <0 0x46000000 0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&fhctl {
+	clocks = <&apmixedsys CLK_APMIXED_MAINPLL>, <&apmixedsys CLK_APMIXED_MPLL>,
+		 <&apmixedsys CLK_APMIXED_MSDCPLL>;
+	mediatek,hopping-ssc-percent = <8>, <5>, <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bma255";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_pins>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmm150";
+		reg = <0x12>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_pins>;
+		syna,startup-delay-ms = <160>;
+		syna,reset-delay-ms = <90>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	pn547: nfc@28 {
+		compatible = "nxp,pn544-i2c";
+		reg = <0x28>;
+		interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_pins>;
+		enable-gpios = <&pio 149 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&pio 94 GPIO_ACTIVE_HIGH>;
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310";
+		reg = <0x48>;
+		interrupts-extended = <&pio 8 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&proximity_pins>;
+	};
+};
+
+&mmc0 {
+	/* eMMC controller */
+	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,hs200-cmd-int-delay = <1>;
+	mediatek,hs400-cmd-int-delay = <1>;
+	mediatek,hs400-ds-dly3 = <0x1a>;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&mt6331_vemc33_reg>;
+	vqmmc-supply = <&mt6331_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	/* MicroSD card slot */
+	vmmc-supply = <&mt6331_vmc_reg>;
+	vqmmc-supply = <&mt6331_vmch_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	/* SDIO WiFi on MMC2 */
+	vmmc-supply = <&mt6331_vmc_reg>;
+	vqmmc-supply = <&mt6331_vmch_reg>;
+	status = "okay";
+};
+
+&pio {
+	mmc0_pins_default: emmc-sdr-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc0_pins_uhs: emmc-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO164__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nfc_pins: nfc-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
+			bias-pull-down;
+			input-enable;
+		};
+
+		pins-fw-ven {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>,
+				 <PINMUX_GPIO149__FUNC_GPIO149>;
+		};
+	};
+
+	ts_pins: touchscreen-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			bias-pull-up;
+			input-enable;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO102__FUNC_GPIO102>;
+			output-high;
+		};
+	};
+
+	proximity_pins: proximity-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	accel_pins: accelerometer-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+				 <PINMUX_GPIO46__FUNC_SCL0>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO125__FUNC_SDA1>,
+				 <PINMUX_GPIO126__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO43__FUNC_SDA2>,
+				 <PINMUX_GPIO44__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins: i2c3-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA3>,
+				 <PINMUX_GPIO137__FUNC_SCL3>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins: i2c4-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO100__FUNC_SDA4>,
+				 <PINMUX_GPIO101__FUNC_SCL4>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO113__FUNC_URXD0>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO114__FUNC_UTXD0>;
+			output-high;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO31__FUNC_URXD2>;
+			bias-pull-up;
+			input-enable;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO32__FUNC_UTXD2>;
+		};
+	};
+};
+
+&pmic {
+	/*
+	 * Smartphones, including the Xperia M5, are equipped with a companion
+	 * MT6332 PMIC: when this is present, the main MT6331 PMIC will fire
+	 * an interrupt on the companion, so we use the MT6332 IRQ GPIO.
+	 */
+	interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
new file mode 100644
index 000000000..597bce2fe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -0,0 +1,753 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mediatek,mt6795-clk.h>
+#include <dt-bindings/gce/mediatek,mt6795-gce.h>
+#include <dt-bindings/memory/mt6795-larb-port.h>
+#include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+#include <dt-bindings/power/mt6795-power.h>
+#include <dt-bindings/reset/mediatek,mt6795-resets.h>
+
+/ {
+	compatible = "mediatek,mt6795";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+			cci-control-port = <&cci_control2>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+			cci-control-port = <&cci_control2>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+			cci-control-port = <&cci_control1>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI  9 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt6795-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt6795-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt6795-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt6795-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT6795_POWER_DOMAIN_VDEC {
+					reg = <MT6795_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_VENC {
+					reg = <MT6795_POWER_DOMAIN_VENC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_SEL>;
+					clock-names = "mm", "venc";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT6795_POWER_DOMAIN_ISP {
+					reg = <MT6795_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MM {
+					reg = <MT6795_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_MJC {
+					reg = <MT6795_POWER_DOMAIN_MJC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_MJC_SEL>;
+					clock-names = "mm", "mjc";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT6795_POWER_DOMAIN_AUDIO {
+					reg = <MT6795_POWER_DOMAIN_AUDIO>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg_async: power-domain@MT6795_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT6795_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&clk26m>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT6795_POWER_DOMAIN_MFG_2D {
+						reg = <MT6795_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT6795_POWER_DOMAIN_MFG {
+							reg = <MT6795_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+			};
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt6795-pinctrl";
+			reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+			reg-names = "base", "eint";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 196>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt6795-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+			#reset-cells = <1>;
+			timeout-sec = <20>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6795-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&clk32k>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt6795-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT6795_INFRA_RST0_PMIC_WRAP_RST>;
+			reset-names = "pwrap";
+			clocks = <&topckgen CLK_TOP_PMICSPI_SEL>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: intpol-controller@10200620 {
+			compatible = "mediatek,mt6795-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		systimer: timer@10200670 {
+			compatible = "mediatek,mt6795-systimer";
+			reg = <0 0x10200670 0 0x10>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&system_clk>;
+			clock-names = "clk13m";
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt6795-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			#iommu-cells = <1>;
+		};
+
+		apmixedsys: syscon@10209000 {
+			compatible = "mediatek,mt6795-apmixedsys", "syscon";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		fhctl: clock-controller@10209f00 {
+			compatible = "mediatek,mt6795-fhctl";
+			reg = <0 0x10209f00 0 0x100>;
+			status = "disabled";
+		};
+
+		gce: mailbox@10212000 {
+			compatible = "mediatek,mt6795-gce", "mediatek,mt8173-gce";
+			reg = <0 0x10212000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+			#mbox-cells = <2>;
+		};
+
+		gic: interrupt-controller@10221000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10221000 0 0x1000>,
+			      <0 0x10222000 0 0x2000>,
+			      <0 0x10224000 0 0x2000>,
+			      <0 0x10226000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cci: cci@10390000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x10390000 0 0x1000>;
+			ranges = <0 0 0x10390000 0x10000>;
+
+			cci_control0: slave-if@1000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace-lite";
+				reg = <0x1000 0x1000>;
+			};
+
+			cci_control1: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control2: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		apdma: dma-controller@11000380 {
+			compatible = "mediatek,mt6795-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000380 0 0x60>,
+			      <0 0x11000400 0 0x60>,
+			      <0 0x11000480 0 0x60>,
+			      <0 0x11000500 0 0x60>,
+			      <0 0x11000580 0 0x60>,
+			      <0 0x11000600 0 0x60>,
+			      <0 0x11000680 0 0x60>,
+			      <0 0x11000700 0 0x60>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <8>;
+			clocks = <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "apdma";
+			mediatek,dma-33bits;
+			#dma-cells = <1>;
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt6795-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 6>, <&apdma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm2: pwm@11006000 {
+			compatible = "mediatek,mt6795-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&pericfg CLK_PERI_PWM>,
+				 <&pericfg CLK_PERI_PWM1>,
+				 <&pericfg CLK_PERI_PWM2>,
+				 <&pericfg CLK_PERI_PWM3>,
+				 <&pericfg CLK_PERI_PWM4>,
+				 <&pericfg CLK_PERI_PWM5>,
+				 <&pericfg CLK_PERI_PWM6>,
+				 <&pericfg CLK_PERI_PWM7>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5", "pwm6", "pwm7";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>,
+				 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt6795-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt6795-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+			assigned-clock-rates = <400000000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		larb0: larb@14021000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <0>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+		};
+
+		smi_common: smi@14022000 {
+			compatible = "mediatek,mt6795-smi-common";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
+			clocks = <&infracfg CLK_INFRA_SMI>, <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&infracfg CLK_INFRA_SMI>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <2>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_ISP>;
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt6795-vdecsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <1>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>, <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT6795_POWER_DOMAIN_VDEC>;
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt6795-vencsys";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@18001000 {
+			compatible = "mediatek,mt6795-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC_VENC>, <&vencsys CLK_VENC_LARB>;
+			clock-names = "apb", "smi";
+			mediatek,smi = <&smi_common>;
+			mediatek,larb-id = <3>;
+			power-domains = <&spm MT6795_POWER_DOMAIN_VENC>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
new file mode 100644
index 000000000..c927932af
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt6797.dtsi"
+
+/ {
+	model = "MediaTek MT6797 Evaluation Board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x1e800000>;
+	};
+
+	chosen {};
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
new file mode 100644
index 000000000..9534cf3a0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for MediaTek X20 Development Board
+ *
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "mt6797.dtsi"
+
+/ {
+	model = "Mediatek X20 Development Board";
+	chassis-type = "embedded";
+	compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* HDMI */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+/* HS - I2C2 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+/* HS - I2C3 */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+/* LS - I2C0 */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	status = "okay";
+};
+
+/* LS - I2C1 */
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	status = "okay";
+};
+
+/* POWER_VPROC */
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins_a>;
+	status = "okay";
+};
+
+/* FAN53555 */
+&i2c7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
new file mode 100644
index 000000000..c3677d77e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt6797-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/mt6797-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt6797";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x002>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x003>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x103>;
+		};
+
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x200>;
+		};
+
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			enable-method = "psci";
+			reg = <0x201>;
+		};
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	topckgen: topckgen@10000000 {
+		compatible = "mediatek,mt6797-topckgen";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	infrasys: infracfg_ao@10001000 {
+		compatible = "mediatek,mt6797-infracfg", "syscon";
+		reg = <0 0x10001000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt6797-pinctrl";
+		reg = <0 0x10005000 0 0x1000>,
+		      <0 0x10002000 0 0x400>,
+		      <0 0x10002400 0 0x400>,
+		      <0 0x10002800 0 0x400>,
+		      <0 0x10002C00 0 0x400>;
+		reg-names = "gpio", "iocfgl", "iocfgb",
+			    "iocfgr", "iocfgt";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		uart0_pins_a: uart0 {
+			pins0 {
+				pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
+					 <MT6797_GPIO235__FUNC_URXD0>;
+			};
+		};
+
+		uart1_pins_a: uart1 {
+			pins1 {
+				pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+					 <MT6797_GPIO233__FUNC_UTXD1>;
+			};
+		};
+
+		i2c0_pins_a: i2c0 {
+			pins0 {
+				pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
+					 <MT6797_GPIO38__FUNC_SDA0_0>;
+			};
+		};
+
+		i2c1_pins_a: i2c1 {
+			pins1 {
+				pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
+					 <MT6797_GPIO56__FUNC_SDA1_0>;
+			};
+		};
+
+		i2c2_pins_a: i2c2 {
+			pins2 {
+				pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
+					 <MT6797_GPIO95__FUNC_SDA2_0>;
+			};
+		};
+
+		i2c3_pins_a: i2c3 {
+			pins3 {
+				pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
+					 <MT6797_GPIO74__FUNC_SCL3_0>;
+			};
+		};
+
+		i2c4_pins_a: i2c4 {
+			pins4 {
+				pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
+					 <MT6797_GPIO239__FUNC_SCL4_0>;
+			};
+		};
+
+		i2c5_pins_a: i2c5 {
+			pins5 {
+				pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
+					 <MT6797_GPIO241__FUNC_SCL5_0>;
+			};
+		};
+
+		i2c6_pins_a: i2c6 {
+			pins6 {
+				pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
+					 <MT6797_GPIO151__FUNC_SCL6_0>;
+			};
+		};
+
+		i2c7_pins_a: i2c7 {
+			pins7 {
+				pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
+					 <MT6797_GPIO153__FUNC_SCL7_0>;
+			};
+		};
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt6797-scpsys";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		clocks = <&topckgen CLK_TOP_MUX_MFG>,
+			 <&topckgen CLK_TOP_MUX_MM>,
+			 <&topckgen CLK_TOP_MUX_VDEC>;
+		clock-names = "mfg", "mm", "vdec";
+		infracfg = <&infrasys>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6797-wdt", "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	apmixedsys: apmixed@1000c000 {
+		compatible = "mediatek,mt6797-apmixedsys";
+		reg = <0 0x1000c000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	sysirq: intpol-controller@10200620 {
+		compatible = "mediatek,mt6797-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10220620 0 0x20>,
+		      <0 0x10220690 0 0x10>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART0>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART1>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART2>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6797-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_UART3>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <0>;
+		reg = <0 0x11007000 0 0x1000>,
+		      <0 0x11000100 0 0x80>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C0>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <1>;
+		reg = <0 0x11008000 0 0x1000>,
+		      <0 0x11000180 0 0x80>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C1>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@11009000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <8>;
+		reg = <0 0x11009000 0 0x1000>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C2>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C2_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c9: i2c@1100d000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <9>;
+		reg = <0 0x1100d000 0 0x1000>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C3>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C3_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@1100e000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <6>;
+		reg = <0 0x1100e000 0 0x1000>,
+		      <0 0x11000500 0 0x80>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C_APPM>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@11010000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <7>;
+		reg = <0 0x11010000 0 0x1000>,
+		      <0 0x11000580 0 0x80>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C_GPUPM>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@11011000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <4>;
+		reg = <0 0x11011000 0 0x1000>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C4>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11013000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <2>;
+		reg = <0 0x11013000 0 0x1000>,
+		      <0 0x11000400 0 0x80>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C2_IMM>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C2_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@11014000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <3>;
+		reg = <0 0x11014000 0 0x1000>,
+		      <0 0x11000480 0 0x80>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C3_IMM>,
+			 <&infrasys CLK_INFRA_AP_DMA>,
+			 <&infrasys CLK_INFRA_I2C3_ARB>;
+		clock-names = "main", "dma", "arb";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@1101c000 {
+		compatible = "mediatek,mt6797-i2c",
+			     "mediatek,mt6577-i2c";
+		id = <5>;
+		reg = <0 0x1101c000 0 0x1000>,
+		      <0 0x11000380 0 0x80>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infrasys CLK_INFRA_I2C5>,
+			 <&infrasys CLK_INFRA_AP_DMA>;
+		clock-names = "main", "dma";
+		clock-div = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mmsys: syscon@14000000 {
+		compatible = "mediatek,mt6797-mmsys", "syscon";
+		reg = <0 0x14000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	imgsys: imgsys_config@15000000  {
+		compatible = "mediatek,mt6797-imgsys", "syscon";
+		reg = <0 0x15000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	vdecsys: vdec_gcon@16000000 {
+		compatible = "mediatek,mt6797-vdecsys", "syscon";
+		reg = <0 0x16000000 0 0x10000>;
+		#clock-cells = <1>;
+	};
+
+	vencsys: venc_gcon@17000000 {
+		compatible = "mediatek,mt6797-vencsys", "syscon";
+		reg = <0 0x17000000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@19000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		reg = <0 0x19000000 0 0x10000>,    /* GICD */
+		      <0 0x19200000 0 0x200000>,   /* GICR */
+		      <0 0x10240000 0 0x2000>;     /* GICC */
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
new file mode 100644
index 000000000..94e1cc9fb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -0,0 +1,635 @@
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	model = "Bananapi BPI-R64";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		factory-key {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		wps-key {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 102 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-r64:pio:green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "bpi-r64:pio:red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&bch {
+	status = "disabled";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&irrx_pins>;
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "rgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&pio>;
+			interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "wan";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan0";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan1";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan2";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan3";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&parallel_nand_pins>;
+	status = "disabled";
+};
+
+&bch {
+	status = "okay";
+};
+
+&snfi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial_nand_pins>;
+	status = "okay";
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		nand-ecc-engine = <&snfi>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "fip";
+				reg = <0x80000 0x200000>;
+				read-only;
+			};
+
+			ubi: partition@280000 {
+				label = "ubi";
+				reg = <0x280000 0x7d80000>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins>;
+	status = "okay";
+};
+
+&pio {
+	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
+	 */
+	asm_sel {
+		gpio-hog;
+		gpios = <90 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	/* eMMC is shared pin with parallel NAND */
+	emmc_pins_default: emmc-pins-default {
+		mux {
+			function = "emmc", "emmc_rst";
+			groups = "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+	};
+
+	emmc_pins_uhs: emmc-pins-uhs {
+		mux {
+			function = "emmc";
+			groups = "emmc";
+		};
+
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_0";
+		};
+	};
+
+	i2s1_pins: i2s1-pins {
+		mux {
+			function = "i2s";
+			groups =  "i2s_out_mclk_bclk_ws",
+				  "i2s1_in_data",
+				  "i2s1_out_data";
+		};
+
+		conf {
+			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+			       "I2S_WS", "I2S_MCLK";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+	};
+
+	irrx_pins: irrx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_rx";
+		};
+	};
+
+	irtx_pins: irtx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_tx";
+		};
+	};
+
+	/* Parallel nand is shared pin with eMMC */
+	parallel_nand_pins: parallel-nand-pins {
+		mux {
+			function = "flash";
+			groups = "par_nand";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_ch1_0", /* mt7622_pwm_ch1_0_pins[] = { 51, }; */
+				 "pwm_ch2_0", /* mt7622_pwm_ch2_0_pins[] = { 52, }; */
+				 "pwm_ch3_2", /* mt7622_pwm_ch3_2_pins[] = { 97, }; */
+				 "pwm_ch4_1", /* mt7622_pwm_ch4_1_pins[] = { 67, }; */
+				 "pwm_ch5_0", /* mt7622_pwm_ch5_0_pins[] = { 68, }; */
+				 "pwm_ch6_0"; /* mt7622_pwm_ch6_0_pins[] = { 69, }; */
+		};
+	};
+
+	wled_pins: wled-pins {
+		mux {
+			function = "led";
+			groups = "wled";
+		};
+	};
+
+	sd0_pins_default: sd0-pins-default {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+	};
+
+	sd0_pins_uhs: sd0-pins-uhs {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "I2S3_OUT";
+			bias-pull-down;
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spic0_pins: spic0-pins {
+		mux {
+			function = "spi";
+			groups = "spic0_0";
+		};
+	};
+
+	spic1_pins: spic1-pins {
+		mux {
+			function = "spi";
+			groups = "spic1_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	spi_nor_pins: spi-nor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_1_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+
+	status = "okay";
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic1_pins>;
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
new file mode 100644
index 000000000..c435984ca
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -0,0 +1,570 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	model = "MediaTek MT7622 RFB1 board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 0 0>;
+		};
+
+		key-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 102 0>;
+		};
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&bch {
+	status = "disabled";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&irrx_pins>;
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&parallel_nand_pins>;
+	status = "disabled";
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_nor_pins>;
+	status = "disabled";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	status = "okay";
+};
+
+&pio {
+	/* eMMC is shared pin with parallel NAND */
+	emmc_pins_default: emmc-pins-default {
+		mux {
+			function = "emmc", "emmc_rst";
+			groups = "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+	};
+
+	emmc_pins_uhs: emmc-pins-uhs {
+		mux {
+			function = "emmc";
+			groups = "emmc";
+		};
+
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c1_0";
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c2_0";
+		};
+	};
+
+	i2s1_pins: i2s1-pins {
+		mux {
+			function = "i2s";
+			groups =  "i2s_out_mclk_bclk_ws",
+				  "i2s1_in_data",
+				  "i2s1_out_data";
+		};
+
+		conf {
+			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+			       "I2S_WS", "I2S_MCLK";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+	};
+
+	irrx_pins: irrx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_rx";
+		};
+	};
+
+	irtx_pins: irtx-pins {
+		mux {
+			function = "ir";
+			groups = "ir_1_tx";
+		};
+	};
+
+	/* Parallel nand is shared pin with eMMC */
+	parallel_nand_pins: parallel-nand-pins {
+		mux {
+			function = "flash";
+			groups = "par_nand";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	pwm7_pins: pwm1-2-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_ch7_2";
+		};
+	};
+
+	wled_pins: wled-pins {
+		mux {
+			function = "led";
+			groups = "wled";
+		};
+	};
+
+	sd0_pins_default: sd0-pins-default {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+	};
+
+	sd0_pins_uhs: sd0-pins-uhs {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "I2S3_OUT";
+			bias-pull-down;
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spic0_pins: spic0-pins {
+		mux {
+			function = "spi";
+			groups = "spic0_0";
+		};
+	};
+
+	spic1_pins: spic1-pins {
+		mux {
+			function = "spi";
+			groups = "spic1_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	spi_nor_pins: spi-nor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_1_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+
+	wmac_pins: wmac-pins {
+		mux {
+			function = "antsel";
+			groups = "antsel0", "antsel1", "antsel2", "antsel3",
+				 "antsel4", "antsel5", "antsel6", "antsel7",
+				 "antsel8", "antsel9", "antsel12", "antsel13",
+				 "antsel14", "antsel15", "antsel16", "antsel17";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm7_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic1_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};
+
+&wmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wmac_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
new file mode 100644
index 000000000..3ee9266fa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -0,0 +1,1010 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Ming Huang <ming.huang@mediatek.com>
+ *	   Sean Wang <sean.wang@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7622-clk.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/reset/mt7622-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "mediatek,mt7622";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-300000000 {
+			opp-hz = /bits/ 64 <30000000>;
+			opp-microvolt = <950000>;
+		};
+
+		opp-437500000 {
+			opp-hz = /bits/ 64 <437500000>;
+			opp-microvolt = <1000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-812500000 {
+			opp-hz = /bits/ 64 <812500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-1025000000 {
+			opp-hz = /bits/ 64 <1025000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1137500000 {
+			opp-hz = /bits/ 64 <1137500000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1262500000 {
+			opp-hz = /bits/ 64 <1262500000>;
+			opp-microvolt = <1250000>;
+		};
+
+		opp-1350000000 {
+			opp-hz = /bits/ 64 <1350000000>;
+			opp-microvolt = <1310000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			clock-frequency = <1300000000>;
+			cci-control-port = <&cci_control2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			clock-frequency = <1300000000>;
+			cci-control-port = <&cci_control2>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pwrap_clk: dummy40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+	};
+
+	clk25m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <47000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_active: cpu-active {
+					temperature = <67000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <87000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu-crit {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_active>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	infracfg: infracfg@10000000 {
+		compatible = "mediatek,mt7622-infracfg",
+			     "syscon";
+		reg = <0 0x10000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrap: pwrap@10001000 {
+		compatible = "mediatek,mt7622-pwrap";
+		reg = <0 0x10001000 0 0x250>;
+		reg-names = "pwrap";
+		clocks = <&infracfg CLK_INFRA_PMIC_PD>, <&pwrap_clk>;
+		clock-names = "spi", "wrap";
+		resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
+		reset-names = "pwrap";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pericfg: pericfg@10002000 {
+		compatible = "mediatek,mt7622-pericfg",
+			     "syscon";
+		reg = <0 0x10002000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	scpsys: power-controller@10006000 {
+		compatible = "mediatek,mt7622-scpsys",
+			     "syscon";
+		#power-domain-cells = <1>;
+		reg = <0 0x10006000 0 0x1000>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+		infracfg = <&infracfg>;
+		clocks = <&topckgen CLK_TOP_HIF_SEL>;
+		clock-names = "hif_sel";
+	};
+
+	cir: cir@10009000 {
+		compatible = "mediatek,mt7622-cir";
+		reg = <0 0x10009000 0 0x1000>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg CLK_INFRA_IRRX_PD>,
+			 <&topckgen CLK_TOP_AXI_SEL>;
+		clock-names = "clk", "bus";
+		status = "disabled";
+	};
+
+	sysirq: interrupt-controller@10200620 {
+		compatible = "mediatek,mt7622-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200620 0 0x20>;
+	};
+
+	efuse: efuse@10206000 {
+		compatible = "mediatek,mt7622-efuse",
+			     "mediatek,efuse";
+		reg = <0 0x10206000 0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		thermal_calibration: calib@198 {
+			reg = <0x198 0xc>;
+		};
+	};
+
+	apmixedsys: apmixedsys@10209000 {
+		compatible = "mediatek,mt7622-apmixedsys",
+			     "syscon";
+		reg = <0 0x10209000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	topckgen: topckgen@10210000 {
+		compatible = "mediatek,mt7622-topckgen",
+			     "syscon";
+		reg = <0 0x10210000 0 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	rng: rng@1020f000 {
+		compatible = "mediatek,mt7622-rng",
+			     "mediatek,mt7623-rng";
+		reg = <0 0x1020f000 0 0x1000>;
+		clocks = <&infracfg CLK_INFRA_TRNG>;
+		clock-names = "rng";
+	};
+
+	pio: pinctrl@10211000 {
+		compatible = "mediatek,mt7622-pinctrl";
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10005000 0 0x1000>;
+		reg-names = "base", "eint";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 103>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+	};
+
+	watchdog: watchdog@10212000 {
+		compatible = "mediatek,mt7622-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10212000 0 0x800>;
+	};
+
+	rtc: rtc@10212800 {
+		compatible = "mediatek,mt7622-rtc",
+			     "mediatek,soc-rtc";
+		reg = <0 0x10212800 0 0x200>;
+		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_RTC>;
+		clock-names = "rtc";
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10310000 0 0x1000>,
+		      <0 0x10320000 0 0x1000>,
+		      <0 0x10340000 0 0x2000>,
+		      <0 0x10360000 0 0x2000>;
+	};
+
+	cci: cci@10390000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x10390000 0 0x1000>;
+		ranges = <0 0 0x10390000 0x10000>;
+
+		cci_control0: slave-if@1000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace-lite";
+			reg = <0x1000 0x1000>;
+		};
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if", "syscon";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+
+		pmu@9000 {
+			compatible = "arm,cci-400-pmu,r1";
+			reg = <0x9000 0x5000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	auxadc: adc@11001000 {
+		compatible = "mediatek,mt7622-auxadc";
+		reg = <0 0x11001000 0 0x1000>;
+		clocks = <&pericfg CLK_PERI_AUXADC_PD>;
+		clock-names = "main";
+		#io-channel-cells = <1>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART0_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART1_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART2_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART3_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	pwm: pwm@11006000 {
+		compatible = "mediatek,mt7622-pwm";
+		reg = <0 0x11006000 0 0x1000>;
+		#pwm-cells = <2>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_PWM_SEL>,
+			 <&pericfg CLK_PERI_PWM_PD>,
+			 <&pericfg CLK_PERI_PWM1_PD>,
+			 <&pericfg CLK_PERI_PWM2_PD>,
+			 <&pericfg CLK_PERI_PWM3_PD>,
+			 <&pericfg CLK_PERI_PWM4_PD>,
+			 <&pericfg CLK_PERI_PWM5_PD>,
+			 <&pericfg CLK_PERI_PWM6_PD>;
+		clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
+			      "pwm5", "pwm6";
+		status = "disabled";
+	};
+
+	i2c0: i2c@11007000 {
+		compatible = "mediatek,mt7622-i2c";
+		reg = <0 0x11007000 0 0x90>,
+		      <0 0x11000100 0 0x80>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0_PD>,
+			 <&pericfg CLK_PERI_AP_DMA_PD>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@11008000 {
+		compatible = "mediatek,mt7622-i2c";
+		reg = <0 0x11008000 0 0x90>,
+		      <0 0x11000180 0 0x80>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1_PD>,
+			 <&pericfg CLK_PERI_AP_DMA_PD>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@11009000 {
+		compatible = "mediatek,mt7622-i2c";
+		reg = <0 0x11009000 0 0x90>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2_PD>,
+			 <&pericfg CLK_PERI_AP_DMA_PD>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@1100a000 {
+		compatible = "mediatek,mt7622-spi";
+		reg = <0 0x1100a000 0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI0_SEL>,
+			 <&pericfg CLK_PERI_SPI0_PD>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal: thermal@1100b000 {
+		#thermal-sensor-cells = <1>;
+		compatible = "mediatek,mt7622-thermal";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_THERM_PD>,
+			 <&pericfg CLK_PERI_AUXADC_PD>;
+		clock-names = "therm", "auxadc";
+		resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
+		reset-names = "therm";
+		mediatek,auxadc = <&auxadc>;
+		mediatek,apmixedsys = <&apmixedsys>;
+		nvmem-cells = <&thermal_calibration>;
+		nvmem-cell-names = "calibration-data";
+	};
+
+	btif: serial@1100c000 {
+		compatible = "mediatek,mt7622-btif",
+			     "mediatek,mtk-btif";
+		reg = <0 0x1100c000 0 0x1000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_BTIF_PD>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+
+		bluetooth {
+			compatible = "mediatek,mt7622-bluetooth";
+			power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+			clocks = <&clk25m>;
+			clock-names = "ref";
+		};
+	};
+
+	nandc: nand-controller@1100d000 {
+		compatible = "mediatek,mt7622-nfc";
+		reg = <0 0x1100D000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_PD>,
+			 <&pericfg CLK_PERI_SNFI_PD>;
+		clock-names = "nfi_clk", "pad_clk";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	snfi: spi@1100d000 {
+		compatible = "mediatek,mt7622-snand";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+		clock-names = "nfi_clk", "pad_clk";
+		nand-ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt7622-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};
+
+	nor_flash: spi@11014000 {
+		compatible = "mediatek,mt7622-nor",
+			     "mediatek,mt8173-nor";
+		reg = <0 0x11014000 0 0xe0>;
+		clocks = <&pericfg CLK_PERI_FLASH_PD>,
+			 <&topckgen CLK_TOP_FLASH_SEL>;
+		clock-names = "spi", "sf";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@11016000 {
+		compatible = "mediatek,mt7622-spi";
+		reg = <0 0x11016000 0 0x100>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+			 <&topckgen CLK_TOP_SPI1_SEL>,
+			 <&pericfg CLK_PERI_SPI1_PD>;
+		clock-names = "parent-clk", "sel-clk", "spi-clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart4: serial@11019000 {
+		compatible = "mediatek,mt7622-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11019000 0 0x400>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_UART_SEL>,
+			 <&pericfg CLK_PERI_UART4_PD>;
+		clock-names = "baud", "bus";
+		status = "disabled";
+	};
+
+	audsys: clock-controller@11220000 {
+		compatible = "mediatek,mt7622-audsys", "syscon";
+		reg = <0 0x11220000 0 0x2000>;
+		#clock-cells = <1>;
+
+		afe: audio-controller {
+			compatible = "mediatek,mt7622-audio";
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "afe", "asys";
+
+			clocks = <&infracfg CLK_INFRA_AUDIO_PD>,
+				 <&topckgen CLK_TOP_AUD1_SEL>,
+				 <&topckgen CLK_TOP_AUD2_SEL>,
+				 <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>,
+				 <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S0_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S1_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S2_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S3_MCK_SEL>,
+				 <&topckgen CLK_TOP_I2S0_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S1_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S2_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S3_MCK_DIV>,
+				 <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>,
+				 <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>,
+				 <&audsys CLK_AUDIO_I2SO1>,
+				 <&audsys CLK_AUDIO_I2SO2>,
+				 <&audsys CLK_AUDIO_I2SO3>,
+				 <&audsys CLK_AUDIO_I2SO4>,
+				 <&audsys CLK_AUDIO_I2SIN1>,
+				 <&audsys CLK_AUDIO_I2SIN2>,
+				 <&audsys CLK_AUDIO_I2SIN3>,
+				 <&audsys CLK_AUDIO_I2SIN4>,
+				 <&audsys CLK_AUDIO_ASRCO1>,
+				 <&audsys CLK_AUDIO_ASRCO2>,
+				 <&audsys CLK_AUDIO_ASRCO3>,
+				 <&audsys CLK_AUDIO_ASRCO4>,
+				 <&audsys CLK_AUDIO_AFE>,
+				 <&audsys CLK_AUDIO_AFE_CONN>,
+				 <&audsys CLK_AUDIO_A1SYS>,
+				 <&audsys CLK_AUDIO_A2SYS>;
+
+			clock-names = "infra_sys_audio_clk",
+				      "top_audio_mux1_sel",
+				      "top_audio_mux2_sel",
+				      "top_audio_a1sys_hp",
+				      "top_audio_a2sys_hp",
+				      "i2s0_src_sel",
+				      "i2s1_src_sel",
+				      "i2s2_src_sel",
+				      "i2s3_src_sel",
+				      "i2s0_src_div",
+				      "i2s1_src_div",
+				      "i2s2_src_div",
+				      "i2s3_src_div",
+				      "i2s0_mclk_en",
+				      "i2s1_mclk_en",
+				      "i2s2_mclk_en",
+				      "i2s3_mclk_en",
+				      "i2so0_hop_ck",
+				      "i2so1_hop_ck",
+				      "i2so2_hop_ck",
+				      "i2so3_hop_ck",
+				      "i2si0_hop_ck",
+				      "i2si1_hop_ck",
+				      "i2si2_hop_ck",
+				      "i2si3_hop_ck",
+				      "asrc0_out_ck",
+				      "asrc1_out_ck",
+				      "asrc2_out_ck",
+				      "asrc3_out_ck",
+				      "audio_afe_pd",
+				      "audio_afe_conn_pd",
+				      "audio_a1sys_pd",
+				      "audio_a2sys_pd";
+
+			assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+					  <&topckgen CLK_TOP_A2SYS_HP_SEL>,
+					  <&topckgen CLK_TOP_A1SYS_HP_DIV>,
+					  <&topckgen CLK_TOP_A2SYS_HP_DIV>;
+			assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>,
+						 <&topckgen CLK_TOP_AUD2PLL>;
+			assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
+		};
+	};
+
+	mmc0: mmc@11230000 {
+		compatible = "mediatek,mt7622-mmc";
+		reg = <0 0x11230000 0 0x1000>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
+			 <&topckgen CLK_TOP_MSDC50_0_SEL>;
+		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
+		reset-names = "hrst";
+		status = "disabled";
+	};
+
+	mmc1: mmc@11240000 {
+		compatible = "mediatek,mt7622-mmc";
+		reg = <0 0x11240000 0 0x1000>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
+			 <&topckgen CLK_TOP_AXI_SEL>;
+		clock-names = "source", "hclk";
+		resets = <&pericfg MT7622_PERI_MSDC1_SW_RST>;
+		reset-names = "hrst";
+		status = "disabled";
+	};
+
+	wmac: wmac@18000000 {
+		compatible = "mediatek,mt7622-wmac";
+		reg = <0 0x18000000 0 0x100000>;
+		interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+
+		mediatek,infracfg = <&infracfg>;
+		status = "disabled";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+	};
+
+	ssusbsys: ssusbsys@1a000000 {
+		compatible = "mediatek,mt7622-ssusbsys",
+			     "syscon";
+		reg = <0 0x1a000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	ssusb: usb@1a0c0000 {
+		compatible = "mediatek,mt7622-xhci",
+			     "mediatek,mtk-xhci";
+		reg = <0 0x1a0c0000 0 0x01000>,
+		      <0 0x1a0c4700 0 0x0100>;
+		reg-names = "mac", "ippc";
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+		clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+			 <&ssusbsys CLK_SSUSB_REF_EN>,
+			 <&ssusbsys CLK_SSUSB_MCU_EN>,
+			 <&ssusbsys CLK_SSUSB_DMA_EN>;
+		clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+		phys = <&u2port0 PHY_TYPE_USB2>,
+		       <&u3port0 PHY_TYPE_USB3>,
+		       <&u2port1 PHY_TYPE_USB2>;
+
+		status = "disabled";
+	};
+
+	u3phy: t-phy@1a0c4000 {
+		compatible = "mediatek,mt7622-tphy",
+			     "mediatek,generic-tphy-v1";
+		reg = <0 0x1a0c4000 0 0x700>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		u2port0: usb-phy@1a0c4800 {
+			reg = <0 0x1a0c4800 0 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+			clock-names = "ref";
+		};
+
+		u3port0: usb-phy@1a0c4900 {
+			reg = <0 0x1a0c4900 0 0x0700>;
+			#phy-cells = <1>;
+			clocks = <&clk25m>;
+			clock-names = "ref";
+		};
+
+		u2port1: usb-phy@1a0c5000 {
+			reg = <0 0x1a0c5000 0 0x0100>;
+			#phy-cells = <1>;
+			clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
+			clock-names = "ref";
+		};
+	};
+
+	pciesys: pciesys@1a100800 {
+		compatible = "mediatek,mt7622-pciesys",
+			     "syscon";
+		reg = <0 0x1a100800 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pciecfg: pciecfg@1a140000 {
+		compatible = "mediatek,generic-pciecfg", "syscon";
+		reg = <0 0x1a140000 0 0x1000>;
+	};
+
+	pcie0: pcie@1a143000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P0_AUX_EN>,
+			 <&pciesys CLK_PCIE_P0_AXI_EN>,
+			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	sata: sata@1a200000 {
+		compatible = "mediatek,mt7622-ahci",
+			     "mediatek,mtk-ahci";
+		reg = <0 0x1a200000 0 0x1100>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "hostc";
+		clocks = <&pciesys CLK_SATA_AHB_EN>,
+			 <&pciesys CLK_SATA_AXI_EN>,
+			 <&pciesys CLK_SATA_ASIC_EN>,
+			 <&pciesys CLK_SATA_RBC_EN>,
+			 <&pciesys CLK_SATA_PM_EN>;
+		clock-names = "ahb", "axi", "asic", "rbc", "pm";
+		phys = <&sata_port PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
+			 <&pciesys MT7622_SATA_PHY_SW_RST>,
+			 <&pciesys MT7622_SATA_PHY_REG_RST>;
+		reset-names = "axi", "sw", "reg";
+		mediatek,phy-mode = <&pciesys>;
+		status = "disabled";
+	};
+
+	sata_phy: t-phy {
+		compatible = "mediatek,mt7622-tphy",
+			     "mediatek,generic-tphy-v1";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		sata_port: sata-phy@1a243000 {
+			reg = <0 0x1a243000 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_ETH_500M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+		};
+	};
+
+	hifsys: syscon@1af00000 {
+		compatible = "mediatek,mt7622-hifsys", "syscon";
+		reg = <0 0x1af00000 0 0x70>;
+	};
+
+	ethsys: syscon@1b000000 {
+		compatible = "mediatek,mt7622-ethsys",
+			     "syscon";
+		reg = <0 0x1b000000 0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	hsdma: dma-controller@1b007000 {
+		compatible = "mediatek,mt7622-hsdma";
+		reg = <0 0x1b007000 0 0x1000>;
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ethsys CLK_ETH_HSDMA_EN>;
+		clock-names = "hsdma";
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+		#dma-cells = <1>;
+		dma-requests = <3>;
+	};
+
+	pcie_mirror: pcie-mirror@10000400 {
+		compatible = "mediatek,mt7622-pcie-mirror",
+			     "syscon";
+		reg = <0 0x10000400 0 0x10>;
+	};
+
+	wed0: wed@1020a000 {
+		compatible = "mediatek,mt7622-wed",
+			     "syscon";
+		reg = <0 0x1020a000 0 0x1000>;
+		interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	wed1: wed@1020b000 {
+		compatible = "mediatek,mt7622-wed",
+			     "syscon";
+		reg = <0 0x1020b000 0 0x1000>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	eth: ethernet@1b100000 {
+		compatible = "mediatek,mt7622-eth",
+			     "mediatek,mt2701-eth",
+			     "syscon";
+		reg = <0 0x1b100000 0 0x20000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&topckgen CLK_TOP_ETH_SEL>,
+			 <&ethsys CLK_ETH_ESW_EN>,
+			 <&ethsys CLK_ETH_GP0_EN>,
+			 <&ethsys CLK_ETH_GP1_EN>,
+			 <&ethsys CLK_ETH_GP2_EN>,
+			 <&sgmiisys CLK_SGMII_TX250M_EN>,
+			 <&sgmiisys CLK_SGMII_RX250M_EN>,
+			 <&sgmiisys CLK_SGMII_CDR_REF>,
+			 <&sgmiisys CLK_SGMII_CDR_FB>,
+			 <&topckgen CLK_TOP_SGMIIPLL>,
+			 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+		clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+			      "sgmii_tx250m", "sgmii_rx250m",
+			      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+			      "eth2pll";
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+		mediatek,ethsys = <&ethsys>;
+		mediatek,sgmiisys = <&sgmiisys>;
+		cci-control-port = <&cci_control2>;
+		mediatek,wed = <&wed0>, <&wed1>;
+		mediatek,pcie-mirror = <&pcie_mirror>;
+		mediatek,hifsys = <&hifsys>;
+		dma-coherent;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sgmiisys: sgmiisys@1b128000 {
+		compatible = "mediatek,mt7622-sgmiisys",
+			     "syscon";
+		reg = <0 0x1b128000 0 0x3000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
new file mode 100644
index 000000000..779dc6782
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/mmc@11230000";
+		__overlay__ {
+			bus-width = <8>;
+			max-frequency = <200000000>;
+			cap-mmc-highspeed;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			hs400-ds-delay = <0x14014>;
+			non-removable;
+			no-sd;
+			no-sdio;
+			status = "okay";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
new file mode 100644
index 000000000..543c13385
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Authors: Daniel Golle <daniel@makrotopia.org>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			spi_nand: spi_nand@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+				spi-tx-buswidth = <4>;
+				spi-rx-buswidth = <4>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x100000>;
+						read-only;
+					};
+
+					partition@100000 {
+						label = "reserved";
+						reg = <0x100000 0x280000>;
+					};
+
+					partition@380000 {
+						label = "fip";
+						reg = <0x380000 0x200000>;
+						read-only;
+					};
+
+					partition@580000 {
+						label = "ubi";
+						reg = <0x580000 0x7a80000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
new file mode 100644
index 000000000..e48881be4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+/*
+ * Authors: Daniel Golle <daniel@makrotopia.org>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "u-boot-env";
+						reg = <0x40000 0x40000>;
+					};
+
+					partition@80000 {
+						label = "reserved2";
+						reg = <0x80000 0x80000>;
+					};
+
+					partition@100000 {
+						label = "fip";
+						reg = <0x100000 0x80000>;
+						read-only;
+					};
+
+					partition@180000 {
+						label = "recovery";
+						reg = <0x180000 0xa80000>;
+					};
+
+					partition@c00000 {
+						label = "fit";
+						reg = <0xc00000 0x1400000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
new file mode 100644
index 000000000..f623bce07
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/mmc@11230000";
+		__overlay__ {
+			bus-width = <4>;
+			max-frequency = <52000000>;
+			cap-sd-highspeed;
+			status = "okay";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
new file mode 100644
index 000000000..b876e5012
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Authors: Sam.Shih <sam.shih@mediatek.com>
+ *          Frank Wunderlich <frank-w@public-files.de>
+ *          Daniel Golle <daniel@makrotopia.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3";
+	chassis-type = "embedded";
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dcin: regulator-12vd {
+		compatible = "regulator-fixed";
+		regulator-name = "12vd";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		/* cooling level (0, 1, 2) - pwm inverted */
+		cooling-levels = <255 96 0>;
+		pwms = <&pwm 0 10000 0>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset-key {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps-key {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* i2c of the left SFP cage (wan) */
+	i2c_sfp1: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	/* i2c of the right SFP cage (lan) */
+	i2c_sfp2: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue_led: led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1.8vd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3vd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&dcin>;
+	};
+
+	/* left SFP cage (wan) */
+	sfp1: sfp-1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <3000>;
+		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* right SFP cage (lan) */
+	sfp2: sfp-2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
+		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cpu-active-high {
+			/* active: set fan to cooling level 2 */
+			cooling-device = <&fan 2 2>;
+			trip = <&cpu_trip_active_high>;
+		};
+
+		cpu-active-med {
+			/* active: set fan to cooling level 1 */
+			cooling-device = <&fan 1 1>;
+			trip = <&cpu_trip_active_med>;
+		};
+
+		cpu-active-low {
+			/* active: set fan to cooling level 0 */
+			cooling-device = <&fan 0 0>;
+			trip = <&cpu_trip_active_low>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		sfp = <&sfp1>;
+		managed = "in-band-status";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@31 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	i2c_pins: i2c-pins {
+		mux {
+			function = "i2c";
+			groups = "i2c";
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_pereset";
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm0", "pwm1_0";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_0";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1_rx_tx";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_0_rx_tx";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan0";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan1";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan3";
+		};
+
+		port5: port@5 {
+			reg = <5>;
+			label = "lan4";
+			phy-mode = "2500base-x";
+			sfp = <&sfp2>;
+			managed = "in-band-status";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+
+	led {
+		led-active-low;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000..3ef371ca2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 0>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	hs400-ds-delay = <0x14014>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pio {
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan4";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000..fc751e049
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,649 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/reset/mt7986-resets.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator-40m {
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+
+		wmcpu_emi: wmcpu-reserved@4fc00000 {
+			no-map;
+			reg = <0 0x4fc00000 0 0x00100000>;
+		};
+
+		wo_emi0: wo-emi@4fd00000 {
+			reg = <0 0x4fd00000 0 0x40000>;
+			no-map;
+		};
+
+		wo_emi1: wo-emi@4fd40000 {
+			reg = <0 0x4fd40000 0 0x40000>;
+			no-map;
+		};
+
+		wo_ilm0: wo-ilm@151e0000 {
+			reg = <0 0x151e0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_ilm1: wo-ilm@151f0000 {
+			reg = <0 0x151f0000 0 0x8000>;
+			no-map;
+		};
+
+		wo_data: wo-data@4fd80000 {
+			reg = <0 0x4fd80000 0 0x240000>;
+			no-map;
+		};
+
+		wo_dlm0: wo-dlm@151e8000 {
+			reg = <0 0x151e8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_dlm1: wo-dlm@151f8000 {
+			reg = <0 0x151f8000 0 0x2000>;
+			no-map;
+		};
+
+		wo_boot: wo-boot@15194000 {
+			reg = <0 0x15194000 0 0x1000>;
+			no-map;
+		};
+
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>,  /* GICD */
+			      <0 0x0c080000 0 0x80000>,  /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+				    "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: rng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		crypto: crypto@10320000 {
+			compatible = "inside-secure,safexcel-eip97";
+			reg = <0 0x10320000 0 0x40000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ring0", "ring1", "ring2", "ring3";
+			clocks = <&infracfg CLK_INFRA_EIP97_CK>;
+			clock-names = "infra_eip97_ck";
+			assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
+			status = "disabled";
+		};
+
+		pwm: pwm@10048000 {
+			compatible = "mediatek,mt7986-pwm";
+			reg = <0 0x10048000 0 0x1000>;
+			#clock-cells = <1>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_PWM_STA>,
+				 <&infracfg CLK_INFRA_PWM1_CK>,
+				 <&infracfg CLK_INFRA_PWM2_CK>;
+			clock-names = "top", "main", "pwm1", "pwm2";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11008000 {
+			compatible = "mediatek,mt7986-i2c";
+			reg = <0 0x11008000 0 0x90>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-div = <5>;
+			clocks = <&infracfg CLK_INFRA_I2C0_CK>,
+				 <&infracfg CLK_INFRA_AP_DMA_CK>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0_CK>,
+				 <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		spi1: spi@1100b000 {
+			compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100b000 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MPLL_D2>,
+				 <&topckgen CLK_TOP_SPIM_MST_SEL>,
+				 <&infracfg CLK_INFRA_SPI1_CK>,
+				 <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+			status = "disabled";
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11200000 {
+			compatible = "mediatek,mt7986-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
+				 <&infracfg CLK_INFRA_IUSB_CK>,
+				 <&infracfg CLK_INFRA_IUSB_133_CK>,
+				 <&infracfg CLK_INFRA_IUSB_66M_CK>,
+				 <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
+			clock-names = "sys_ck",
+				      "ref_ck",
+				      "mcu_ck",
+				      "dma_ck",
+				      "xhci_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt7986-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			assigned-clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+					  <&topckgen CLK_TOP_EMMC_250M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MPLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D5_D2>;
+			clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+				 <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+				 <&infracfg CLK_INFRA_MSDC_CK>,
+				 <&infracfg CLK_INFRA_MSDC_133M_CK>,
+				 <&infracfg CLK_INFRA_MSDC_66M_CK>;
+			clock-names = "source", "hclk", "source_cg", "bus_clk",
+				      "sys_cg";
+			status = "disabled";
+		};
+
+		thermal: thermal@1100c800 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>,
+				 <&infracfg CLK_INFRA_ADC_FRC_CK>;
+			clock-names = "therm", "auxadc", "adc_32k";
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		pcie: pcie@11280000 {
+			compatible = "mediatek,mt7986-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0x00 0x11280000 0x00 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0x00 0x20000000 0x00
+				  0x20000000 0x00 0x10000000>;
+			clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
+				 <&infracfg CLK_INFRA_IPCIE_CK>,
+				 <&infracfg CLK_INFRA_IPCIER_CK>,
+				 <&infracfg CLK_INFRA_IPCIEB_CK>;
+			clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
+			status = "disabled";
+
+			phys = <&pcie_port PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		pcie_phy: t-phy {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			pcie_port: pcie-phy@11c00000 {
+				reg = <0 0x11c00000 0 0x20000>;
+				clocks = <&clk40m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		efuse: efuse@11d00000 {
+			compatible = "mediatek,mt7986-efuse", "mediatek,efuse";
+			reg = <0 0x11d00000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			thermal_calibration: calib@274 {
+				reg = <0x274 0xc>;
+			};
+		};
+
+		usb_phy: t-phy@11e10000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e10000 0x1700>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+		wed0: wed@15010000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15010000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif0>;
+		};
+
+		wed1: wed@15011000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15011000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
+					<&wo_data>, <&wo_boot>;
+			memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+					      "wo-data", "wo-boot";
+			mediatek,wo-ccif = <&wo_ccif1>;
+		};
+
+		wo_ccif0: syscon@151a5000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151a5000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wo_ccif1: syscon@151ad000 {
+			compatible = "mediatek,mt7986-wo-ccif", "syscon";
+			reg = <0 0x151ad000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7986-eth";
+			reg = <0 0x15100000 0 0x80000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ethsys CLK_ETH_FE_EN>,
+				 <&ethsys CLK_ETH_GP2_EN>,
+				 <&ethsys CLK_ETH_GP1_EN>,
+				 <&ethsys CLK_ETH_WOCPU1_EN>,
+				 <&ethsys CLK_ETH_WOCPU0_EN>,
+				 <&sgmiisys0 CLK_SGMII0_TX250M_EN>,
+				 <&sgmiisys0 CLK_SGMII0_RX250M_EN>,
+				 <&sgmiisys0 CLK_SGMII0_CDR_REF>,
+				 <&sgmiisys0 CLK_SGMII0_CDR_FB>,
+				 <&sgmiisys1 CLK_SGMII1_TX250M_EN>,
+				 <&sgmiisys1 CLK_SGMII1_RX250M_EN>,
+				 <&sgmiisys1 CLK_SGMII1_CDR_REF>,
+				 <&sgmiisys1 CLK_SGMII1_CDR_FB>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>;
+			clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+				      "sgmii_tx250m", "sgmii_rx250m",
+				      "sgmii_cdr_ref", "sgmii_cdr_fb",
+				      "sgmii2_tx250m", "sgmii2_rx250m",
+				      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+				      "netsys0", "netsys1";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_SGM_325M_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,wed-pcie = <&wed_pcie>;
+			mediatek,wed = <&wed0>, <&wed1>;
+			#reset-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		wifi: wifi@18000000 {
+			compatible = "mediatek,mt7986-wmac";
+			resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+			reset-names = "consys";
+			clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
+				 <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+			clock-names = "mcu", "ap2conn";
+			reg = <0 0x18000000 0 0x1000000>,
+			      <0 0x10003000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			memory-region = <&wmcpu_emi>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				cpu_trip_crit: crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active_high: active-high {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_active_med: active-med {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_active_low: active-low {
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000..dde190442
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <31>;
+			reset-gpios = <&pio 5 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "lan4";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <2500>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+};
+
+&pio {
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	spic_pins: spic-pins {
+		mux {
+			function = "spi";
+			groups = "spi1_2";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+	spi_nand: spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic_pins>;
+	cs-gpios = <0>, <0>;
+	status = "okay";
+};
+
+&ssusb {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000..db5189664
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include "mt7986a.dtsi"
+/ {
+	compatible = "mediatek,mt7986b";
+};
+
+&pio {
+	compatible = "mediatek,mt7986b-pinctrl";
+	gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h
new file mode 100644
index 000000000..061c3255a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8167-pinfunc.h
@@ -0,0 +1,744 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ */
+#ifndef __DTS_MT8167_PINFUNC_H
+#define __DTS_MT8167_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8167_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8167_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1)
+#define MT8167_PIN_0_EINT0__FUNC_DPI_CK (MTK_PIN_NO(0) | 2)
+#define MT8167_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3)
+#define MT8167_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4)
+#define MT8167_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6)
+#define MT8167_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7)
+
+#define MT8167_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8167_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1)
+#define MT8167_PIN_1_EINT1__FUNC_DPI_D12 (MTK_PIN_NO(1) | 2)
+#define MT8167_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3)
+#define MT8167_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4)
+#define MT8167_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5)
+#define MT8167_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6)
+#define MT8167_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7)
+
+#define MT8167_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8167_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1)
+#define MT8167_PIN_2_EINT2__FUNC_DPI_D13 (MTK_PIN_NO(2) | 2)
+#define MT8167_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3)
+#define MT8167_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4)
+#define MT8167_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5)
+#define MT8167_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6)
+#define MT8167_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7)
+
+#define MT8167_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8167_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1)
+#define MT8167_PIN_3_EINT3__FUNC_DPI_D14 (MTK_PIN_NO(3) | 2)
+#define MT8167_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3)
+#define MT8167_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4)
+#define MT8167_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5)
+#define MT8167_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6)
+#define MT8167_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7)
+
+#define MT8167_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8167_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1)
+#define MT8167_PIN_4_EINT4__FUNC_DPI_D15 (MTK_PIN_NO(4) | 2)
+#define MT8167_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3)
+#define MT8167_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4)
+#define MT8167_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5)
+#define MT8167_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6)
+#define MT8167_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7)
+
+#define MT8167_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8167_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1)
+#define MT8167_PIN_5_EINT5__FUNC_DPI_D16 (MTK_PIN_NO(5) | 2)
+#define MT8167_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3)
+#define MT8167_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4)
+#define MT8167_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5)
+#define MT8167_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6)
+#define MT8167_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7)
+
+#define MT8167_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8167_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1)
+#define MT8167_PIN_6_EINT6__FUNC_DPI_D17 (MTK_PIN_NO(6) | 2)
+#define MT8167_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3)
+#define MT8167_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4)
+#define MT8167_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5)
+#define MT8167_PIN_6_EINT6__FUNC_MM_TEST_CK (MTK_PIN_NO(6) | 6)
+#define MT8167_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7)
+
+#define MT8167_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8167_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1)
+#define MT8167_PIN_7_EINT7__FUNC_DPI_D6 (MTK_PIN_NO(7) | 2)
+#define MT8167_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3)
+#define MT8167_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4)
+#define MT8167_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5)
+#define MT8167_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6)
+#define MT8167_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7)
+
+#define MT8167_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8167_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1)
+#define MT8167_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2)
+#define MT8167_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3)
+#define MT8167_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4)
+#define MT8167_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5)
+#define MT8167_PIN_8_EINT8__FUNC_DPI_D7 (MTK_PIN_NO(8) | 6)
+#define MT8167_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7)
+
+#define MT8167_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8167_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1)
+#define MT8167_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2)
+#define MT8167_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT8167_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4)
+#define MT8167_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5)
+#define MT8167_PIN_9_EINT9__FUNC_DPI_D8 (MTK_PIN_NO(9) | 6)
+#define MT8167_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7)
+
+#define MT8167_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8167_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1)
+#define MT8167_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2)
+#define MT8167_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3)
+#define MT8167_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4)
+#define MT8167_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5)
+#define MT8167_PIN_10_EINT10__FUNC_DPI_D9 (MTK_PIN_NO(10) | 6)
+#define MT8167_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7)
+
+#define MT8167_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8167_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1)
+#define MT8167_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2)
+#define MT8167_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3)
+#define MT8167_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4)
+#define MT8167_PIN_11_EINT11__FUNC_DPI_D10 (MTK_PIN_NO(11) | 5)
+#define MT8167_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6)
+#define MT8167_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7)
+
+#define MT8167_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8167_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1)
+#define MT8167_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2)
+#define MT8167_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3)
+#define MT8167_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4)
+#define MT8167_PIN_12_EINT12__FUNC_DPI_D11 (MTK_PIN_NO(12) | 5)
+#define MT8167_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6)
+#define MT8167_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7)
+
+#define MT8167_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8167_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3)
+#define MT8167_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4)
+#define MT8167_PIN_13_EINT13__FUNC_DPI_D0 (MTK_PIN_NO(13) | 5)
+#define MT8167_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6)
+#define MT8167_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7)
+
+#define MT8167_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8167_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2)
+#define MT8167_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3)
+#define MT8167_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4)
+#define MT8167_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5)
+#define MT8167_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8167_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7)
+
+#define MT8167_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8167_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2)
+#define MT8167_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3)
+#define MT8167_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4)
+#define MT8167_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5)
+#define MT8167_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6)
+#define MT8167_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7)
+
+#define MT8167_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8167_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2)
+#define MT8167_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3)
+#define MT8167_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4)
+#define MT8167_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5)
+#define MT8167_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6)
+#define MT8167_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7)
+
+#define MT8167_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8167_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2)
+#define MT8167_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3)
+#define MT8167_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4)
+#define MT8167_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5)
+#define MT8167_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6)
+#define MT8167_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7)
+
+#define MT8167_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8167_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2)
+#define MT8167_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3)
+#define MT8167_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4)
+#define MT8167_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5)
+#define MT8167_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6)
+#define MT8167_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7)
+
+#define MT8167_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8167_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1)
+#define MT8167_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2)
+#define MT8167_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3)
+#define MT8167_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4)
+#define MT8167_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5)
+#define MT8167_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6)
+#define MT8167_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7)
+
+#define MT8167_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8167_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1)
+#define MT8167_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3)
+#define MT8167_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4)
+#define MT8167_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5)
+#define MT8167_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6)
+#define MT8167_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7)
+
+#define MT8167_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8167_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1)
+#define MT8167_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2)
+#define MT8167_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3)
+#define MT8167_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7)
+
+#define MT8167_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8167_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2)
+#define MT8167_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3)
+#define MT8167_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4)
+#define MT8167_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5)
+#define MT8167_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6)
+#define MT8167_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7)
+
+#define MT8167_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8167_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2)
+#define MT8167_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3)
+#define MT8167_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4)
+#define MT8167_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5)
+#define MT8167_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6)
+#define MT8167_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7)
+
+#define MT8167_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8167_PIN_24_EINT24__FUNC_DPI_D20 (MTK_PIN_NO(24) | 1)
+#define MT8167_PIN_24_EINT24__FUNC_DPI_DE (MTK_PIN_NO(24) | 2)
+#define MT8167_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3)
+#define MT8167_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4)
+#define MT8167_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5)
+#define MT8167_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6)
+#define MT8167_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7)
+
+#define MT8167_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8167_PIN_25_EINT25__FUNC_DPI_D19 (MTK_PIN_NO(25) | 1)
+#define MT8167_PIN_25_EINT25__FUNC_DPI_VSYNC (MTK_PIN_NO(25) | 2)
+#define MT8167_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3)
+#define MT8167_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4)
+#define MT8167_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5)
+#define MT8167_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6)
+#define MT8167_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7)
+
+#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1)
+#define MT8167_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2)
+
+#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1)
+#define MT8167_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2)
+
+#define MT8167_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5)
+#define MT8167_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6)
+
+#define MT8167_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8167_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1)
+
+#define MT8167_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8167_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1)
+
+#define MT8167_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8167_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1)
+
+#define MT8167_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8167_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1)
+
+#define MT8167_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8167_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1)
+
+#define MT8167_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8167_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1)
+#define MT8167_PIN_34_URXD2__FUNC_DPI_D5 (MTK_PIN_NO(34) | 2)
+#define MT8167_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3)
+#define MT8167_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4)
+#define MT8167_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6)
+#define MT8167_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7)
+
+#define MT8167_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8167_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1)
+#define MT8167_PIN_35_UTXD2__FUNC_DPI_HSYNC (MTK_PIN_NO(35) | 2)
+#define MT8167_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3)
+#define MT8167_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4)
+#define MT8167_PIN_35_UTXD2__FUNC_DPI_D18 (MTK_PIN_NO(35) | 5)
+#define MT8167_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6)
+#define MT8167_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7)
+
+#define MT8167_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8167_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1)
+#define MT8167_PIN_36_MRG_CLK__FUNC_DPI_D4 (MTK_PIN_NO(36) | 2)
+#define MT8167_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3)
+#define MT8167_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4)
+#define MT8167_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5)
+#define MT8167_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6)
+#define MT8167_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7)
+
+#define MT8167_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_DPI_D3 (MTK_PIN_NO(37) | 2)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6)
+#define MT8167_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7)
+
+#define MT8167_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8167_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1)
+#define MT8167_PIN_38_MRG_DI__FUNC_DPI_D1 (MTK_PIN_NO(38) | 2)
+#define MT8167_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3)
+#define MT8167_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4)
+#define MT8167_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5)
+#define MT8167_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6)
+#define MT8167_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7)
+
+#define MT8167_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8167_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1)
+#define MT8167_PIN_39_MRG_DO__FUNC_DPI_D2 (MTK_PIN_NO(39) | 2)
+#define MT8167_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3)
+#define MT8167_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4)
+#define MT8167_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5)
+#define MT8167_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6)
+#define MT8167_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7)
+
+#define MT8167_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8167_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1)
+#define MT8167_PIN_40_KPROW0__FUNC_IMG_TEST_CK (MTK_PIN_NO(40) | 4)
+#define MT8167_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7)
+
+#define MT8167_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8167_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1)
+#define MT8167_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define MT8167_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3)
+#define MT8167_PIN_41_KPROW1__FUNC_MFG_TEST_CK (MTK_PIN_NO(41) | 4)
+#define MT8167_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7)
+
+#define MT8167_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8167_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1)
+#define MT8167_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7)
+
+#define MT8167_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8167_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1)
+#define MT8167_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2)
+#define MT8167_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3)
+#define MT8167_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4)
+#define MT8167_PIN_43_KPCOL1__FUNC_DFD_NTRST_XI (MTK_PIN_NO(43) | 5)
+#define MT8167_PIN_43_KPCOL1__FUNC_UDI_NTRST_XI (MTK_PIN_NO(43) | 6)
+#define MT8167_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7)
+
+#define MT8167_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8167_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1)
+#define MT8167_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2)
+#define MT8167_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3)
+#define MT8167_PIN_44_JTMS__FUNC_GPUDFD_TMS_XI (MTK_PIN_NO(44) | 4)
+#define MT8167_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5)
+#define MT8167_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6)
+
+#define MT8167_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8167_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1)
+#define MT8167_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2)
+#define MT8167_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3)
+#define MT8167_PIN_45_JTCK__FUNC_GPUDFD_TCK_XI (MTK_PIN_NO(45) | 4)
+#define MT8167_PIN_45_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(45) | 5)
+#define MT8167_PIN_45_JTCK__FUNC_UDI_TCK_XI (MTK_PIN_NO(45) | 6)
+
+#define MT8167_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8167_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1)
+#define MT8167_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2)
+#define MT8167_PIN_46_JTDI__FUNC_GPUDFD_TDI_XI (MTK_PIN_NO(46) | 4)
+#define MT8167_PIN_46_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(46) | 5)
+#define MT8167_PIN_46_JTDI__FUNC_UDI_TDI_XI (MTK_PIN_NO(46) | 6)
+
+#define MT8167_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8167_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1)
+#define MT8167_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2)
+#define MT8167_PIN_47_JTDO__FUNC_GPUDFD_TDO (MTK_PIN_NO(47) | 4)
+#define MT8167_PIN_47_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(47) | 5)
+#define MT8167_PIN_47_JTDO__FUNC_UDI_TDO (MTK_PIN_NO(47) | 6)
+
+#define MT8167_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8167_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1)
+#define MT8167_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3)
+#define MT8167_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4)
+#define MT8167_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7)
+
+#define MT8167_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8167_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1)
+#define MT8167_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3)
+#define MT8167_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4)
+#define MT8167_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7)
+
+#define MT8167_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8167_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1)
+#define MT8167_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2)
+#define MT8167_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3)
+#define MT8167_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4)
+#define MT8167_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7)
+
+#define MT8167_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8167_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1)
+#define MT8167_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2)
+#define MT8167_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3)
+#define MT8167_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4)
+#define MT8167_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7)
+
+#define MT8167_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8167_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1)
+
+#define MT8167_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8167_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1)
+
+#define MT8167_PIN_54_DISP_PWM__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8167_PIN_54_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(54) | 1)
+#define MT8167_PIN_54_DISP_PWM__FUNC_PWM_B (MTK_PIN_NO(54) | 2)
+#define MT8167_PIN_54_DISP_PWM__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7)
+
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6)
+#define MT8167_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7)
+
+#define MT8167_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6)
+#define MT8167_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7)
+
+#define MT8167_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1)
+#define MT8167_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4)
+#define MT8167_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5)
+#define MT8167_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6)
+#define MT8167_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7)
+
+#define MT8167_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8167_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1)
+
+#define MT8167_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8167_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1)
+
+#define MT8167_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8167_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1)
+#define MT8167_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2)
+
+#define MT8167_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8167_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1)
+#define MT8167_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2)
+
+#define MT8167_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8167_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1)
+#define MT8167_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2)
+
+#define MT8167_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8167_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1)
+#define MT8167_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2)
+
+#define MT8167_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8167_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1)
+#define MT8167_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2)
+#define MT8167_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7)
+
+#define MT8167_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8167_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1)
+#define MT8167_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2)
+#define MT8167_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7)
+
+#define MT8167_PIN_66_LCM_RST__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8167_PIN_66_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(66) | 1)
+#define MT8167_PIN_66_LCM_RST__FUNC_I2S0_MCK (MTK_PIN_NO(66) | 3)
+#define MT8167_PIN_66_LCM_RST__FUNC_DBG_MON_B_3 (MTK_PIN_NO(66) | 7)
+
+#define MT8167_PIN_67_DSI_TE__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8167_PIN_67_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(67) | 1)
+#define MT8167_PIN_67_DSI_TE__FUNC_I2S_8CH_MCK (MTK_PIN_NO(67) | 3)
+#define MT8167_PIN_67_DSI_TE__FUNC_DBG_MON_B_14 (MTK_PIN_NO(67) | 7)
+
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6)
+#define MT8167_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7)
+
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_DPI_D21 (MTK_PIN_NO(69) | 4)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6)
+#define MT8167_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7)
+
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_DPI_D22 (MTK_PIN_NO(70) | 4)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6)
+#define MT8167_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7)
+
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6)
+#define MT8167_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7)
+
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_DPI_D23 (MTK_PIN_NO(72) | 4)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6)
+#define MT8167_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7)
+
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6)
+#define MT8167_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7)
+
+#define MT8167_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0)
+#define MT8167_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1)
+
+#define MT8167_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0)
+#define MT8167_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1)
+
+#define MT8167_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0)
+#define MT8167_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1)
+
+#define MT8167_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0)
+#define MT8167_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1)
+
+#define MT8167_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0)
+#define MT8167_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1)
+
+#define MT8167_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0)
+#define MT8167_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1)
+
+#define MT8167_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0)
+#define MT8167_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1)
+
+#define MT8167_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0)
+#define MT8167_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1)
+
+#define MT8167_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0)
+#define MT8167_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1)
+
+#define MT8167_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0)
+#define MT8167_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1)
+
+#define MT8167_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0)
+#define MT8167_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1)
+
+#define MT8167_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0)
+#define MT8167_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1)
+
+#define MT8167_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0)
+#define MT8167_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1)
+
+#define MT8167_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0)
+#define MT8167_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1)
+
+#define MT8167_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0)
+#define MT8167_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1)
+
+#define MT8167_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0)
+#define MT8167_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1)
+
+#define MT8167_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0)
+#define MT8167_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1)
+#define MT8167_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2)
+
+#define MT8167_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT8167_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1)
+#define MT8167_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2)
+
+#define MT8167_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT8167_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1)
+#define MT8167_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2)
+
+#define MT8167_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT8167_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1)
+#define MT8167_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2)
+
+#define MT8167_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT8167_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1)
+#define MT8167_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2)
+
+#define MT8167_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT8167_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1)
+#define MT8167_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2)
+
+#define MT8167_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT8167_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1)
+#define MT8167_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2)
+#define MT8167_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3)
+
+#define MT8167_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT8167_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1)
+#define MT8167_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2)
+#define MT8167_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3)
+
+#define MT8167_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT8167_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1)
+#define MT8167_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2)
+
+#define MT8167_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT8167_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1)
+#define MT8167_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2)
+
+#define MT8167_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8167_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1)
+#define MT8167_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2)
+#define MT8167_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3)
+#define MT8167_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5)
+#define MT8167_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7)
+
+#define MT8167_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8167_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1)
+#define MT8167_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2)
+#define MT8167_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3)
+#define MT8167_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4)
+#define MT8167_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5)
+#define MT8167_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7)
+
+#define MT8167_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8167_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1)
+#define MT8167_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3)
+#define MT8167_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5)
+#define MT8167_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7)
+
+#define MT8167_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8167_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1)
+#define MT8167_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2)
+#define MT8167_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3)
+#define MT8167_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5)
+#define MT8167_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7)
+
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1)
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4)
+#define MT8167_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7)
+
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_UDI_NTRST_XI (MTK_PIN_NO(105) | 2)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_DFD_NTRST_XI (MTK_PIN_NO(105) | 3)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_GPUEJ_NTRST_XI (MTK_PIN_NO(105) | 5)
+#define MT8167_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7)
+
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_UDI_TMS_XI (MTK_PIN_NO(106) | 2)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_DFD_TMS_XI (MTK_PIN_NO(106) | 3)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_GPUEJ_TMS_XI (MTK_PIN_NO(106) | 5)
+#define MT8167_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7)
+
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_UDI_TCK_XI (MTK_PIN_NO(107) | 2)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_DFD_TCK_XI (MTK_PIN_NO(107) | 3)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_GPUEJ_TCK_XI (MTK_PIN_NO(107) | 5)
+#define MT8167_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7)
+
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_UDI_TDI_XI (MTK_PIN_NO(108) | 2)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_DFD_TDI_XI (MTK_PIN_NO(108) | 3)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_GPUEJ_TDI_XI (MTK_PIN_NO(108) | 5)
+#define MT8167_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7)
+
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_UDI_TDO (MTK_PIN_NO(109) | 2)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_DFD_TDO (MTK_PIN_NO(109) | 3)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_GPUEJ_TDO (MTK_PIN_NO(109) | 5)
+#define MT8167_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7)
+
+#define MT8167_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8167_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1)
+#define MT8167_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4)
+
+#define MT8167_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8167_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1)
+#define MT8167_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4)
+
+#define MT8167_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8167_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1)
+#define MT8167_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4)
+
+#define MT8167_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8167_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1)
+#define MT8167_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4)
+
+#define MT8167_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8167_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1)
+#define MT8167_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4)
+
+#define MT8167_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8167_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1)
+#define MT8167_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4)
+
+#define MT8167_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8167_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1)
+#define MT8167_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4)
+
+#define MT8167_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8167_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1)
+#define MT8167_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4)
+
+#define MT8167_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8167_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1)
+#define MT8167_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4)
+
+#define MT8167_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8167_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1)
+#define MT8167_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4)
+
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1)
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4)
+#define MT8167_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5)
+
+#define MT8167_PIN_121_CEC__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8167_PIN_121_CEC__FUNC_CEC (MTK_PIN_NO(121) | 1)
+
+#define MT8167_PIN_122_HTPLG__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8167_PIN_122_HTPLG__FUNC_HTPLG (MTK_PIN_NO(122) | 1)
+
+#define MT8167_PIN_123_HDMISCK__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8167_PIN_123_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(123) | 1)
+
+#define MT8167_PIN_124_HDMISD__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8167_PIN_124_HDMISD__FUNC_HDMISD (MTK_PIN_NO(124) | 1)
+
+#endif /* __DTS_MT8167_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
new file mode 100644
index 000000000..ebf1a358f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "mt8167.dtsi"
+#include "pumpkin-common.dtsi"
+
+/ {
+	model = "Pumpkin MT8167";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
new file mode 100644
index 000000000..2374c0953
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2020 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8167-clk.h>
+#include <dt-bindings/memory/mt8167-larb-port.h>
+#include <dt-bindings/power/mt8167-power.h>
+
+#include "mt8167-pinfunc.h"
+
+#include "mt8516.dtsi"
+
+/ {
+	compatible = "mediatek,mt8167";
+
+	soc {
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8167-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8167-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8167-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8167-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			spm: power-controller {
+				compatible = "mediatek,mt8167-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8167_POWER_DOMAIN_MM {
+					reg = <MT8167_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_SMI_MM>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_VDEC {
+					reg = <MT8167_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_SMI_MM>,
+						 <&topckgen CLK_TOP_RG_VDEC>;
+					clock-names = "mm", "vdec";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_ISP {
+					reg = <MT8167_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_SMI_MM>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT8167_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&topckgen CLK_TOP_RG_AXI_MFG>,
+						 <&topckgen CLK_TOP_RG_SLOW_MFG>;
+					clock-names = "axi_mfg", "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+					mediatek,infracfg = <&infracfg>;
+
+					power-domain@MT8167_POWER_DOMAIN_MFG_2D {
+						reg = <MT8167_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8167_POWER_DOMAIN_MFG {
+							reg = <MT8167_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+
+				power-domain@MT8167_POWER_DOMAIN_CONN {
+					reg = <MT8167_POWER_DOMAIN_CONN>;
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+			};
+		};
+
+		imgsys: syscon@15000000 {
+			compatible = "mediatek,mt8167-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8167-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8167-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8167-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		smi_common: smi@14017000 {
+			compatible = "mediatek,mt8167-smi-common";
+			reg = <0 0x14017000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+		};
+
+		larb0: larb@14016000 {
+			compatible = "mediatek,mt8167-smi-larb";
+			reg = <0 0x14016000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_MM>;
+		};
+
+		larb1: larb@15001000 {
+			compatible = "mediatek,mt8167-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB1_SMI>,
+				 <&imgsys CLK_IMG_LARB1_SMI>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_ISP>;
+		};
+
+		larb2: larb@16010000 {
+			compatible = "mediatek,mt8167-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8167_POWER_DOMAIN_VDEC>;
+		};
+
+		iommu: m4u@10203000 {
+			compatible = "mediatek,mt8167-m4u";
+			reg = <0 0x10203000 0 0x1000>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>;
+			#iommu-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
new file mode 100644
index 000000000..256f245ac
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2019 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm-hana.dtsi"
+
+/ {
+	model = "Google Hanawl";
+	chassis-type = "laptop";
+	compatible = "google,hana-rev7", "mediatek,mt8173";
+};
+
+&cpu_thermal {
+	trips {
+		cpu_crit: cpu_crit0 {
+			temperature = <100000>;
+			type = "critical";
+		};
+	};
+};
+
+&gpio_keys {
+	/delete-node/switch-tablet-mode;
+	/delete-node/switch-volume-down;
+	/delete-node/switch-volume-up;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
new file mode 100644
index 000000000..fcf0cb76a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm-hana.dtsi"
+
+/ {
+	model = "Google Hana";
+	chassis-type = "laptop";
+	compatible = "google,hana-rev6", "google,hana-rev5",
+		     "google,hana-rev4", "google,hana-rev3",
+		     "google,hana", "mediatek,mt8173";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
new file mode 100644
index 000000000..bdcd35cec
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+#include "mt8173-elm.dtsi"
+
+&i2c0 {
+	clock-frequency = <200000>;
+};
+
+&i2c3 {
+	touchscreen2: touchscreen@34 {
+		compatible = "melfas,mip4_ts";
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/*
+	 * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
+	 * Gen (MTK) are using synaptics touchscreen (hid-over-i2c driver) as a
+	 * second source touchscreen.
+	 */
+	touchscreen3: touchscreen@20 {
+		compatible = "hid-over-i2c";
+		reg = <0x20>;
+		hid-descr-addr = <0x0020>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	/*
+	 * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
+	 * Gen (MTK) are using synaptics trackpad (hid-over-i2c driver) as a
+	 * second source trackpad.
+	 */
+	trackpad2: trackpad@2c {
+		compatible = "hid-over-i2c";
+		interrupt-parent = <&pio>;
+		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		wakeup-source;
+	};
+};
+
+&mmc1 {
+	wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&pio {
+	hdmi_mux_pins: hdmi_mux_pins {
+		pins2 {
+			pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_wp {
+			pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
new file mode 100644
index 000000000..2390d0420
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+/dts-v1/;
+#include "mt8173-elm.dtsi"
+
+/ {
+	model = "Google Elm";
+	chassis-type = "laptop";
+	compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
+		     "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
+		     "google,elm", "mediatek,mt8173";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
new file mode 100644
index 000000000..111495622
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -0,0 +1,1206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016 MediaTek Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/dlg,da9211-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8173.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		mmc2 = &mmc3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 1000000>;
+		power-supply = <&bl_fixed_reg>;
+		enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_backlight_en_pins>;
+		status = "okay";
+	};
+
+	bl_fixed_reg: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <1000>;
+		enable-active-high;
+		gpio = <&pio 32 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_fixed_pins>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		switch-power {
+			label = "Power";
+			gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		switch-tablet-mode {
+			label = "Tablet_mode";
+			gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_TABLET_MODE>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		switch-volume-down {
+			label = "Volume_down";
+			gpios = <&pio 123 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		switch-volume-up {
+			label = "Volume_up";
+			gpios = <&pio 124 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	panel_fixed_3v3: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "PANEL_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-boot-on;
+		off-on-delay-us = <500000>;
+		gpio = <&pio 41 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_fixed_pins>;
+	};
+
+	ps8640_fixed_1v2: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PS8640_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-enable-ramp-delay = <2000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_fixed_pins>;
+	};
+
+	sdio_fixed_3v3: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_fixed_3v3_pins>;
+	};
+
+	sound: sound {
+		compatible = "mediatek,mt8173-rt5650";
+		mediatek,audio-codec = <&rt5650 &hdmi0>;
+		mediatek,platform = <&afe>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&aud_i2s2>;
+
+		mediatek,mclk = <1>;
+		codec-capture {
+			sound-dai = <&rt5650 1>;
+		};
+	};
+
+	hdmicon: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&hdmiddc0>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	watchdog {
+		compatible = "arm,smc-wdt";
+	};
+};
+
+/*
+ * Disable the original MMIO watch dog and switch to the SMC watchdog, which
+ * operates on the same MMIO.
+ */
+&watchdog {
+	status = "disabled";
+};
+
+&mfg_async {
+	domain-supply = <&da9211_vgpu_reg>;
+};
+
+&cec {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu_thermal {
+	sustainable-power = <4500>; /* milliwatts */
+	trips {
+		threshold: trip-point0 {
+			temperature = <60000>;
+		};
+
+		target: trip-point1 {
+			temperature = <65000>;
+		};
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	ports {
+		port {
+			dsi0_out: endpoint {
+				remote-endpoint = <&ps8640_in>;
+			};
+		};
+	};
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_phy {
+	status = "okay";
+	mediatek,ibias = <0xc>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rt5650: audio-codec@1a {
+		compatible = "realtek,rt5650";
+		reg = <0x1a>;
+		avdd-supply = <&mt6397_vgp1_reg>;
+		cpvdd-supply = <&mt6397_vcama_reg>;
+		interrupt-parent = <&pio>;
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt5650_irq>;
+		#sound-dai-cells = <1>;
+		realtek,dmic1-data-pin = <2>;
+		realtek,jd-mode = <2>;
+	};
+
+	ps8640: edp-bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+		powerdown-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ps8640_pins>;
+		vdd12-supply = <&ps8640_fixed_1v2>;
+		vdd33-supply = <&mt6397_vgp2_reg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				ps8640_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&panel_fixed_3v3>;
+				backlight = <&backlight>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <1500000>;
+	status = "okay";
+
+	da9211: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+		interrupt-parent = <&pio>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			da9211_vcpu_reg: BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <4400000>;
+				regulator-ramp-delay = <10000>;
+				regulator-always-on;
+				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
+							   DA9211_BUCK_MODE_AUTO>;
+			};
+
+			da9211_vgpu_reg: BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-ramp-delay = <10000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&pio>;
+		interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&trackpad_irq>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		interrupt-parent = <&pio>;
+		interrupts = <117 IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		vcc-supply = <&mt6397_vgp6_reg>;
+		wakeup-source;
+	};
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x14015>;
+	mediatek,hs200-cmd-int-delay = <30>;
+	mediatek,hs400-cmd-int-delay = <14>;
+	mediatek,hs400-cmd-resp-sel-rising;
+	vmmc-supply = <&mt6397_vemc_3v3_reg>;
+	vqmmc-supply = <&mt6397_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cd-gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6397_vmch_reg>;
+	vqmmc-supply = <&mt6397_vmc_reg>;
+};
+
+&mmc3 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	vmmc-supply = <&sdio_fixed_3v3>;
+	vqmmc-supply = <&mt6397_vgp3_reg>;
+	non-removable;
+	cap-power-off-card;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&pio>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <0x0d>;
+		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
+	};
+
+	mwifiex: mwifiex@1 {
+		compatible = "marvell,sd8897";
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = <3>;
+	};
+};
+
+&nor_flash {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_gpio1_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&pio {
+	gpio-line-names = "EC_INT_1V8",
+			  "SD_CD_L",
+			  "ALC5514_IRQ",
+			  "ALC5650_IRQ",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it SFWP_B.
+			   */
+			  "AP_FLASH_WP_L",
+			  "SFIN",
+			  "SFCS0",
+			  "SFHOLD",
+			  "SFOUT",
+			  "SFCK",
+			  "WRAP_EVENT_S_EINT10",
+			  "PMU_INT",
+			  "I2S2_WS_ALC5650",
+			  "I2S2_BCK_ALC5650",
+			  "PWR_BTN_1V8",
+			  "DA9212_IRQ",
+			  "IDDIG",
+			  "WATCHDOG",
+			  "CEC",
+			  "HDMISCK",
+			  "HDMISD",
+			  "HTPLG",
+			  "MSDC3_DAT0",
+			  "MSDC3_DAT1",
+			  "MSDC3_DAT2",
+			  "MSDC3_DAT3",
+			  "MSDC3_CLK",
+			  "MSDC3_CMD",
+			  "USB_C0_OC_FLAGB",
+			  "USBA_OC1_L",
+			  "PS8640_1V2_ENABLE",
+			  "THERM_ALERT_N",
+			  "PANEL_LCD_POWER_EN",
+			  "ANX7688_CHIP_PD_C",
+			  "EC_IN_RW_1V8",
+			  "ANX7688_1V_EN_C",
+			  "USB_DP_HPD_C",
+			  "TPM_DAVINT_N",
+			  "MARVELL8897_IRQ",
+			  "EN_USB_A0_PWR",
+			  "USBA_A0_OC_L",
+			  "EN_PP3300_DX_EDP",
+			  "",
+			  "SOC_I2C2_1V8_SDA_400K",
+			  "SOC_I2C2_1V8_SCL_400K",
+			  "SOC_I2C0_1V8_SDA_400K",
+			  "SOC_I2C0_1V8_SCL_400K",
+			  "EMMC_ID1",
+			  "EMMC_ID0",
+			  "MEM_CONFIG3",
+			  "EMMC_ID2",
+			  "MEM_CONFIG1",
+			  "MEM_CONFIG2",
+			  "BRD_ID2",
+			  "MEM_CONFIG0",
+			  "BRD_ID0",
+			  "BRD_ID1",
+			  "EMMC_DAT0",
+			  "EMMC_DAT1",
+			  "EMMC_DAT2",
+			  "EMMC_DAT3",
+			  "EMMC_DAT4",
+			  "EMMC_DAT5",
+			  "EMMC_DAT6",
+			  "EMMC_DAT7",
+			  "EMMC_CLK",
+			  "EMMC_CMD",
+			  "EMMC_RCLK",
+			  "PLT_RST_L",
+			  "LID_OPEN_1V8_L",
+			  "AUDIO_SPI_MISO_R",
+			  "",
+			  "AC_OK_1V8",
+			  "SD_DATA0",
+			  "SD_DATA1",
+			  "SD_DATA2",
+			  "SD_DATA3",
+			  "SD_CLK",
+			  "SD_CMD",
+			  "PWRAP_SPI0_MI",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_CK",
+			  "PWRAP_SPI0_CSN",
+			  "",
+			  "",
+			  "WIFI_PDN",
+			  "RTC32K_1V8",
+			  "DISP_PWM0",
+			  "TOUCHSCREEN_INT_L",
+			  "",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "PS8640_MODE_CONF",
+			  "TOUCHSCREEN_RESET_R",
+			  "PLATFORM_PROCHOT_L",
+			  "PANEL_POWER_EN",
+			  "REC_MODE_L",
+			  "EC_FW_UPDATE_L",
+			  "ACCEL2_INT_L",
+			  "HDMI_DP_INT",
+			  "ACCELGYRO3_INT_L",
+			  "ACCELGYRO4_INT_L",
+			  "SPI_EC_CLK",
+			  "SPI_EC_MI",
+			  "SPI_EC_MO",
+			  "SPI_EC_CSN",
+			  "SOC_I2C3_1V8_SDA_400K",
+			  "SOC_I2C3_1V8_SCL_400K",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PS8640_SYSRSTN_1V8",
+			  "APIN_MAX98090_DOUT2",
+			  "TP_INT_1V8_L_R",
+			  "RST_USB_HUB_R",
+			  "BT_WAKE_L",
+			  "ACCEL1_INT_L",
+			  "TABLET_MODE_L",
+			  "",
+			  "V_UP_IN_L_R",
+			  "V_DOWN_IN_L_R",
+			  "SOC_I2C1_1V8_SDA_1M",
+			  "SOC_I2C1_1V8_SCL_1M",
+			  "PS8640_PDN_1V8",
+			  "MAX98090_LRCLK",
+			  "MAX98090_BCLK",
+			  "MAX98090_MCLK",
+			  "APOUT_MAX98090_DIN",
+			  "APIN_MAX98090_DOUT",
+			  "SOC_I2C4_1V8_SDA_400K",
+			  "SOC_I2C4_1V8_SCL_400K";
+
+	aud_i2s2: aud_i2s2 {
+		pins1 {
+			pinmux = <MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS>,
+				 <MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK>,
+				 <MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK>,
+				 <MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1>,
+				 <MT8173_PIN_12_EINT12__FUNC_I2S2_WS>,
+				 <MT8173_PIN_13_EINT13__FUNC_I2S2_BCK>,
+				 <MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2>;
+			bias-pull-down;
+		};
+	};
+
+	bl_fixed_pins: bl_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_32_UTXD2__FUNC_GPIO32>;
+			output-low;
+		};
+	};
+
+	bt_wake_pins: bt_wake_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_119_KPROW0__FUNC_GPIO119>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
+	gpio_keys_pins: gpio_keys_pins {
+		volume_pins {
+			pinmux = <MT8173_PIN_123_KPCOL1__FUNC_GPIO123>,
+				 <MT8173_PIN_124_KPCOL2__FUNC_GPIO124>;
+			bias-pull-up;
+		};
+
+		tablet_mode_pins {
+			pinmux = <MT8173_PIN_121_KPROW2__FUNC_GPIO121>;
+			bias-pull-up;
+		};
+	};
+
+	hdmi_mux_pins: hdmi_mux_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_36_DAISYNC__FUNC_GPIO36>;
+		};
+	};
+
+	i2c1_pins_a: i2c1 {
+		da9211_pins {
+			pinmux = <MT8173_PIN_15_EINT15__FUNC_GPIO15>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins_insert {
+			pinmux = <MT8173_PIN_1_EINT1__FUNC_GPIO1>;
+			bias-pull-up;
+		};
+	};
+
+	mmc3_pins_default: mmc3default {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_ds {
+			pinmux = <MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc3_pins_uhs: mmc3 {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_gpio1_pins: nor {
+		pins1 {
+			pinmux = <MT8173_PIN_6_EINT6__FUNC_SFCS0>,
+				 <MT8173_PIN_7_EINT7__FUNC_SFHOLD>,
+				 <MT8173_PIN_8_EINT8__FUNC_SFIN>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+
+		pins2 {
+			pinmux = <MT8173_PIN_5_EINT5__FUNC_SFOUT>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_9_EINT9__FUNC_SFCK>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up;
+		};
+	};
+
+	panel_backlight_en_pins: panel_backlight_en_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_95_PCM_TX__FUNC_GPIO95>;
+		};
+	};
+
+	panel_fixed_pins: panel_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_41_CMMCLK__FUNC_GPIO41>;
+		};
+	};
+
+	ps8640_pins: ps8640_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_92_PCM_CLK__FUNC_GPIO92>,
+				 <MT8173_PIN_115_URTS0__FUNC_GPIO115>,
+				 <MT8173_PIN_127_LCM_RST__FUNC_GPIO127>;
+		};
+	};
+
+	ps8640_fixed_pins: ps8640_fixed_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_30_URTS2__FUNC_GPIO30>;
+		};
+	};
+
+	rt5650_irq: rt5650_irq {
+		pins1 {
+			pinmux = <MT8173_PIN_3_EINT3__FUNC_GPIO3>;
+			bias-pull-down;
+		};
+	};
+
+	sdio_fixed_3v3_pins: sdio_fixed_3v3_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
+			output-low;
+		};
+	};
+
+	spi_pins_a: spi1 {
+		pins1 {
+			pinmux = <MT8173_PIN_0_EINT0__FUNC_GPIO0>;
+			bias-pull-up;
+		};
+
+		pins_spi {
+			pinmux = <MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_>,
+				 <MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_>,
+				 <MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_>,
+				 <MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_>;
+			bias-disable;
+		};
+	};
+
+	trackpad_irq: trackpad_irq {
+		pins1 {
+			pinmux = <MT8173_PIN_117_URXD3__FUNC_GPIO117>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	usb_pins: usb {
+		pins1 {
+			pinmux = <MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101>;
+			output-high;
+			bias-disable;
+		};
+	};
+
+	wifi_wake_pins: wifi_wake_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_38_CONN_RST__FUNC_GPIO38>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pmic: pmic {
+		compatible = "mediatek,mt6397";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		clock: mt6397clock {
+			compatible = "mediatek,mt6397-clk";
+			#clock-cells = <1>;
+		};
+
+		pio6397: pinctrl {
+			compatible = "mediatek,mt6397-pinctrl";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-allowed-modes = <0 1>;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+				regulator-always-on;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+
+		rtc: mt6397rtc {
+			compatible = "mediatek,mt6397-rtc";
+		};
+
+		syscfg_pctl_pmic: syscfg_pctl_pmic@c000 {
+			compatible = "mediatek,mt6397-pctl-pmic-syscfg",
+				     "syscon";
+			reg = <0 0x0000c000 0 0x0108>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	mediatek,pad-select = <1>;
+	status = "okay";
+	/* clients */
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0x0>;
+		spi-max-frequency = <12000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		google,cros-ec-spi-msg-delay = <500>;
+
+		i2c_tunnel: i2c-tunnel0 {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <1>;
+			};
+		};
+	};
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6397_vusb_reg>;
+	status = "okay";
+};
+
+&thermal {
+	bank0-supply = <&mt6397_vpca15_reg>;
+	bank1-supply = <&da9211_vcpu_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+	vusb33-supply = <&mt6397_vusb_reg>;
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
new file mode 100644
index 000000000..d258c8021
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "mt8173.dtsi"
+
+/ {
+	model = "MediaTek MT8173 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen { };
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "d";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
+	extcon_usb: extcon_iddig {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb_p1_vbus: regulator-usb-p1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_p0_vbus: regulator-usb-p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mfg_async {
+	domain-supply = <&da9211_vgpu_reg>;
+};
+
+&cec {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6397_vpca15_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&da9211_vcpu_reg>;
+	sram-supply = <&mt6397_vsramca7_reg>;
+};
+
+&dpi0 {
+	status = "okay";
+};
+
+&hdmi_phy {
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	buck: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+
+		regulators {
+			da9211_vcpu_reg: BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <4400000>;
+				regulator-ramp-delay = <10000>;
+				regulator-always-on;
+			};
+
+			da9211_vgpu_reg: BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1310000>;
+				regulator-min-microamp = <2000000>;
+				regulator-max-microamp = <3000000>;
+				regulator-ramp-delay = <10000>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mediatek,hs200-cmd-int-delay = <26>;
+	mediatek,hs400-cmd-int-delay = <14>;
+	mediatek,hs400-cmd-resp-sel-rising;
+	vmmc-supply = <&mt6397_vemc_3v3_reg>;
+	vqmmc-supply = <&mt6397_vio18_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr25;
+	cd-gpios = <&pio 132 0>;
+	vmmc-supply = <&mt6397_vmch_reg>;
+	vqmmc-supply = <&mt6397_vmc_reg>;
+};
+
+&pio {
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+
+		pins_insert {
+			pinmux = <MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_2mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_rst {
+			pinmux = <MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_4mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	usb_id_pins_float: usb_iddig_pull_up {
+		pins_iddig {
+			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_pins_ground: usb_iddig_pull_down {
+		pins_iddig {
+			pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>;
+			bias-pull-down;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	/* Only MT8173 E1 needs USB power domain */
+	power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
+
+	pmic: pmic {
+		compatible = "mediatek,mt6397";
+		interrupt-parent = <&pio>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
+&pio {
+	spi_pins_a: spi0 {
+		pins_spi {
+			pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
+				<MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
+				<MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
+				<MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p0_vbus>;
+	extcon = <&extcon_usb>;
+	dr_mode = "otg";
+	wakeup-source;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_id_pins_float>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_host {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h
new file mode 100644
index 000000000..a5e308dc8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h
@@ -0,0 +1,674 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ */
+
+#ifndef __DTS_MT8173_PINFUNC_H
+#define __DTS_MT8173_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8173_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8173_PIN_0_EINT0__FUNC_IRDA_PDN (MTK_PIN_NO(0) | 1)
+#define MT8173_PIN_0_EINT0__FUNC_I2S1_WS (MTK_PIN_NO(0) | 2)
+#define MT8173_PIN_0_EINT0__FUNC_AUD_SPDIF (MTK_PIN_NO(0) | 3)
+#define MT8173_PIN_0_EINT0__FUNC_UTXD0 (MTK_PIN_NO(0) | 4)
+#define MT8173_PIN_0_EINT0__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(0) | 7)
+
+#define MT8173_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8173_PIN_1_EINT1__FUNC_IRDA_RXD (MTK_PIN_NO(1) | 1)
+#define MT8173_PIN_1_EINT1__FUNC_I2S1_BCK (MTK_PIN_NO(1) | 2)
+#define MT8173_PIN_1_EINT1__FUNC_SDA5 (MTK_PIN_NO(1) | 3)
+#define MT8173_PIN_1_EINT1__FUNC_URXD0 (MTK_PIN_NO(1) | 4)
+#define MT8173_PIN_1_EINT1__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(1) | 7)
+
+#define MT8173_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8173_PIN_2_EINT2__FUNC_IRDA_TXD (MTK_PIN_NO(2) | 1)
+#define MT8173_PIN_2_EINT2__FUNC_I2S1_MCK (MTK_PIN_NO(2) | 2)
+#define MT8173_PIN_2_EINT2__FUNC_SCL5 (MTK_PIN_NO(2) | 3)
+#define MT8173_PIN_2_EINT2__FUNC_UTXD3 (MTK_PIN_NO(2) | 4)
+#define MT8173_PIN_2_EINT2__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(2) | 7)
+
+#define MT8173_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8173_PIN_3_EINT3__FUNC_DSI1_TE (MTK_PIN_NO(3) | 1)
+#define MT8173_PIN_3_EINT3__FUNC_I2S1_DO_1 (MTK_PIN_NO(3) | 2)
+#define MT8173_PIN_3_EINT3__FUNC_SDA3 (MTK_PIN_NO(3) | 3)
+#define MT8173_PIN_3_EINT3__FUNC_URXD3 (MTK_PIN_NO(3) | 4)
+#define MT8173_PIN_3_EINT3__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(3) | 7)
+
+#define MT8173_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8173_PIN_4_EINT4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define MT8173_PIN_4_EINT4__FUNC_I2S1_DO_2 (MTK_PIN_NO(4) | 2)
+#define MT8173_PIN_4_EINT4__FUNC_SCL3 (MTK_PIN_NO(4) | 3)
+#define MT8173_PIN_4_EINT4__FUNC_UCTS3 (MTK_PIN_NO(4) | 4)
+#define MT8173_PIN_4_EINT4__FUNC_SFWP_B (MTK_PIN_NO(4) | 6)
+
+#define MT8173_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8173_PIN_5_EINT5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 1)
+#define MT8173_PIN_5_EINT5__FUNC_I2S2_WS (MTK_PIN_NO(5) | 2)
+#define MT8173_PIN_5_EINT5__FUNC_SPI_CK_3_ (MTK_PIN_NO(5) | 3)
+#define MT8173_PIN_5_EINT5__FUNC_URTS3 (MTK_PIN_NO(5) | 4)
+#define MT8173_PIN_5_EINT5__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(5) | 5)
+#define MT8173_PIN_5_EINT5__FUNC_SFOUT (MTK_PIN_NO(5) | 6)
+
+#define MT8173_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8173_PIN_6_EINT6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 1)
+#define MT8173_PIN_6_EINT6__FUNC_I2S2_BCK (MTK_PIN_NO(6) | 2)
+#define MT8173_PIN_6_EINT6__FUNC_SPI_MI_3_ (MTK_PIN_NO(6) | 3)
+#define MT8173_PIN_6_EINT6__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(6) | 5)
+#define MT8173_PIN_6_EINT6__FUNC_SFCS0 (MTK_PIN_NO(6) | 6)
+
+#define MT8173_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8173_PIN_7_EINT7__FUNC_PCM1_DI (MTK_PIN_NO(7) | 1)
+#define MT8173_PIN_7_EINT7__FUNC_I2S2_DI_1 (MTK_PIN_NO(7) | 2)
+#define MT8173_PIN_7_EINT7__FUNC_SPI_MO_3_ (MTK_PIN_NO(7) | 3)
+#define MT8173_PIN_7_EINT7__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(7) | 5)
+#define MT8173_PIN_7_EINT7__FUNC_SFHOLD (MTK_PIN_NO(7) | 6)
+
+#define MT8173_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8173_PIN_8_EINT8__FUNC_PCM1_DO (MTK_PIN_NO(8) | 1)
+#define MT8173_PIN_8_EINT8__FUNC_I2S2_DI_2 (MTK_PIN_NO(8) | 2)
+#define MT8173_PIN_8_EINT8__FUNC_SPI_CS_3_ (MTK_PIN_NO(8) | 3)
+#define MT8173_PIN_8_EINT8__FUNC_AUD_SPDIF (MTK_PIN_NO(8) | 4)
+#define MT8173_PIN_8_EINT8__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(8) | 5)
+#define MT8173_PIN_8_EINT8__FUNC_SFIN (MTK_PIN_NO(8) | 6)
+
+#define MT8173_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8173_PIN_9_EINT9__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(9) | 1)
+#define MT8173_PIN_9_EINT9__FUNC_I2S2_MCK (MTK_PIN_NO(9) | 2)
+#define MT8173_PIN_9_EINT9__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(9) | 4)
+#define MT8173_PIN_9_EINT9__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(9) | 5)
+#define MT8173_PIN_9_EINT9__FUNC_SFCK (MTK_PIN_NO(9) | 6)
+
+#define MT8173_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8173_PIN_10_EINT10__FUNC_CLKM0 (MTK_PIN_NO(10) | 1)
+#define MT8173_PIN_10_EINT10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 2)
+#define MT8173_PIN_10_EINT10__FUNC_DISP_PWM1 (MTK_PIN_NO(10) | 3)
+#define MT8173_PIN_10_EINT10__FUNC_PWM4 (MTK_PIN_NO(10) | 4)
+#define MT8173_PIN_10_EINT10__FUNC_IRDA_RXD (MTK_PIN_NO(10) | 5)
+
+#define MT8173_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8173_PIN_11_EINT11__FUNC_CLKM1 (MTK_PIN_NO(11) | 1)
+#define MT8173_PIN_11_EINT11__FUNC_I2S3_WS (MTK_PIN_NO(11) | 2)
+#define MT8173_PIN_11_EINT11__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(11) | 3)
+#define MT8173_PIN_11_EINT11__FUNC_PWM5 (MTK_PIN_NO(11) | 4)
+#define MT8173_PIN_11_EINT11__FUNC_IRDA_TXD (MTK_PIN_NO(11) | 5)
+#define MT8173_PIN_11_EINT11__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(11) | 6)
+#define MT8173_PIN_11_EINT11__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(11) | 7)
+
+#define MT8173_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8173_PIN_12_EINT12__FUNC_CLKM2 (MTK_PIN_NO(12) | 1)
+#define MT8173_PIN_12_EINT12__FUNC_I2S3_BCK (MTK_PIN_NO(12) | 2)
+#define MT8173_PIN_12_EINT12__FUNC_SRCLKENA0 (MTK_PIN_NO(12) | 3)
+#define MT8173_PIN_12_EINT12__FUNC_I2S2_WS (MTK_PIN_NO(12) | 5)
+#define MT8173_PIN_12_EINT12__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(12) | 7)
+
+#define MT8173_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8173_PIN_13_EINT13__FUNC_CLKM3 (MTK_PIN_NO(13) | 1)
+#define MT8173_PIN_13_EINT13__FUNC_I2S3_MCK (MTK_PIN_NO(13) | 2)
+#define MT8173_PIN_13_EINT13__FUNC_SRCLKENA0 (MTK_PIN_NO(13) | 3)
+#define MT8173_PIN_13_EINT13__FUNC_I2S2_BCK (MTK_PIN_NO(13) | 5)
+#define MT8173_PIN_13_EINT13__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(13) | 7)
+
+#define MT8173_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8173_PIN_14_EINT14__FUNC_CMDAT0 (MTK_PIN_NO(14) | 1)
+#define MT8173_PIN_14_EINT14__FUNC_CMCSD0 (MTK_PIN_NO(14) | 2)
+#define MT8173_PIN_14_EINT14__FUNC_CLKM2 (MTK_PIN_NO(14) | 4)
+#define MT8173_PIN_14_EINT14__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(14) | 7)
+
+#define MT8173_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8173_PIN_15_EINT15__FUNC_CMDAT1 (MTK_PIN_NO(15) | 1)
+#define MT8173_PIN_15_EINT15__FUNC_CMCSD1 (MTK_PIN_NO(15) | 2)
+#define MT8173_PIN_15_EINT15__FUNC_CMFLASH (MTK_PIN_NO(15) | 3)
+#define MT8173_PIN_15_EINT15__FUNC_CLKM3 (MTK_PIN_NO(15) | 4)
+#define MT8173_PIN_15_EINT15__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(15) | 7)
+
+#define MT8173_PIN_16_IDDIG__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8173_PIN_16_IDDIG__FUNC_IDDIG (MTK_PIN_NO(16) | 1)
+#define MT8173_PIN_16_IDDIG__FUNC_CMFLASH (MTK_PIN_NO(16) | 2)
+#define MT8173_PIN_16_IDDIG__FUNC_PWM5 (MTK_PIN_NO(16) | 4)
+
+#define MT8173_PIN_17_WATCHDOG__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8173_PIN_17_WATCHDOG__FUNC_WATCHDOG_AO (MTK_PIN_NO(17) | 1)
+
+#define MT8173_PIN_18_CEC__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8173_PIN_18_CEC__FUNC_CEC (MTK_PIN_NO(18) | 1)
+
+#define MT8173_PIN_19_HDMISCK__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8173_PIN_19_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(19) | 1)
+#define MT8173_PIN_19_HDMISCK__FUNC_HDCP_SCL (MTK_PIN_NO(19) | 2)
+
+#define MT8173_PIN_20_HDMISD__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8173_PIN_20_HDMISD__FUNC_HDMISD (MTK_PIN_NO(20) | 1)
+#define MT8173_PIN_20_HDMISD__FUNC_HDCP_SDA (MTK_PIN_NO(20) | 2)
+
+#define MT8173_PIN_21_HTPLG__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8173_PIN_21_HTPLG__FUNC_HTPLG (MTK_PIN_NO(21) | 1)
+
+#define MT8173_PIN_22_MSDC3_DAT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(22) | 1)
+
+#define MT8173_PIN_23_MSDC3_DAT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(23) | 1)
+
+#define MT8173_PIN_24_MSDC3_DAT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(24) | 1)
+
+#define MT8173_PIN_25_MSDC3_DAT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(25) | 1)
+
+#define MT8173_PIN_26_MSDC3_CLK__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(26) | 1)
+
+#define MT8173_PIN_27_MSDC3_CMD__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(27) | 1)
+
+#define MT8173_PIN_28_MSDC3_DSL__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8173_PIN_28_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(28) | 1)
+
+#define MT8173_PIN_29_UCTS2__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8173_PIN_29_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(29) | 1)
+
+#define MT8173_PIN_30_URTS2__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8173_PIN_30_URTS2__FUNC_URTS2 (MTK_PIN_NO(30) | 1)
+
+#define MT8173_PIN_31_URXD2__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8173_PIN_31_URXD2__FUNC_URXD2 (MTK_PIN_NO(31) | 1)
+#define MT8173_PIN_31_URXD2__FUNC_UTXD2 (MTK_PIN_NO(31) | 2)
+
+#define MT8173_PIN_32_UTXD2__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8173_PIN_32_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(32) | 1)
+#define MT8173_PIN_32_UTXD2__FUNC_URXD2 (MTK_PIN_NO(32) | 2)
+
+#define MT8173_PIN_33_DAICLK__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8173_PIN_33_DAICLK__FUNC_MRG_CLK (MTK_PIN_NO(33) | 1)
+#define MT8173_PIN_33_DAICLK__FUNC_PCM0_CLK (MTK_PIN_NO(33) | 2)
+
+#define MT8173_PIN_34_DAIPCMIN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8173_PIN_34_DAIPCMIN__FUNC_MRG_DI (MTK_PIN_NO(34) | 1)
+#define MT8173_PIN_34_DAIPCMIN__FUNC_PCM0_DI (MTK_PIN_NO(34) | 2)
+
+#define MT8173_PIN_35_DAIPCMOUT__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8173_PIN_35_DAIPCMOUT__FUNC_MRG_DO (MTK_PIN_NO(35) | 1)
+#define MT8173_PIN_35_DAIPCMOUT__FUNC_PCM0_DO (MTK_PIN_NO(35) | 2)
+
+#define MT8173_PIN_36_DAISYNC__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8173_PIN_36_DAISYNC__FUNC_MRG_SYNC (MTK_PIN_NO(36) | 1)
+#define MT8173_PIN_36_DAISYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(36) | 2)
+
+#define MT8173_PIN_37_EINT16__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8173_PIN_37_EINT16__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(37) | 1)
+#define MT8173_PIN_37_EINT16__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(37) | 2)
+#define MT8173_PIN_37_EINT16__FUNC_PWM0 (MTK_PIN_NO(37) | 3)
+#define MT8173_PIN_37_EINT16__FUNC_PWM1 (MTK_PIN_NO(37) | 4)
+#define MT8173_PIN_37_EINT16__FUNC_PWM2 (MTK_PIN_NO(37) | 5)
+#define MT8173_PIN_37_EINT16__FUNC_CLKM0 (MTK_PIN_NO(37) | 6)
+
+#define MT8173_PIN_38_CONN_RST__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8173_PIN_38_CONN_RST__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(38) | 1)
+#define MT8173_PIN_38_CONN_RST__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(38) | 2)
+#define MT8173_PIN_38_CONN_RST__FUNC_CLKM1 (MTK_PIN_NO(38) | 6)
+
+#define MT8173_PIN_39_CM2MCLK__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8173_PIN_39_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(39) | 1)
+#define MT8173_PIN_39_CM2MCLK__FUNC_CMCSD0 (MTK_PIN_NO(39) | 2)
+#define MT8173_PIN_39_CM2MCLK__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(39) | 7)
+
+#define MT8173_PIN_40_CMPCLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8173_PIN_40_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(40) | 1)
+#define MT8173_PIN_40_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(40) | 2)
+#define MT8173_PIN_40_CMPCLK__FUNC_CMCSD2 (MTK_PIN_NO(40) | 3)
+#define MT8173_PIN_40_CMPCLK__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(40) | 7)
+
+#define MT8173_PIN_41_CMMCLK__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8173_PIN_41_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(41) | 1)
+#define MT8173_PIN_41_CMMCLK__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(41) | 7)
+
+#define MT8173_PIN_42_DSI_TE__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8173_PIN_42_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(42) | 1)
+
+#define MT8173_PIN_43_SDA2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8173_PIN_43_SDA2__FUNC_SDA2 (MTK_PIN_NO(43) | 1)
+
+#define MT8173_PIN_44_SCL2__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8173_PIN_44_SCL2__FUNC_SCL2 (MTK_PIN_NO(44) | 1)
+
+#define MT8173_PIN_45_SDA0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8173_PIN_45_SDA0__FUNC_SDA0 (MTK_PIN_NO(45) | 1)
+
+#define MT8173_PIN_46_SCL0__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8173_PIN_46_SCL0__FUNC_SCL0 (MTK_PIN_NO(46) | 1)
+
+#define MT8173_PIN_47_RDN0_A__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8173_PIN_47_RDN0_A__FUNC_CMDAT2 (MTK_PIN_NO(47) | 1)
+
+#define MT8173_PIN_48_RDP0_A__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8173_PIN_48_RDP0_A__FUNC_CMDAT3 (MTK_PIN_NO(48) | 1)
+
+#define MT8173_PIN_49_RDN1_A__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8173_PIN_49_RDN1_A__FUNC_CMDAT4 (MTK_PIN_NO(49) | 1)
+
+#define MT8173_PIN_50_RDP1_A__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8173_PIN_50_RDP1_A__FUNC_CMDAT5 (MTK_PIN_NO(50) | 1)
+
+#define MT8173_PIN_51_RCN_A__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8173_PIN_51_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(51) | 1)
+
+#define MT8173_PIN_52_RCP_A__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8173_PIN_52_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(52) | 1)
+
+#define MT8173_PIN_53_RDN2_A__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8173_PIN_53_RDN2_A__FUNC_CMDAT8 (MTK_PIN_NO(53) | 1)
+#define MT8173_PIN_53_RDN2_A__FUNC_CMCSD3 (MTK_PIN_NO(53) | 2)
+
+#define MT8173_PIN_54_RDP2_A__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8173_PIN_54_RDP2_A__FUNC_CMDAT9 (MTK_PIN_NO(54) | 1)
+#define MT8173_PIN_54_RDP2_A__FUNC_CMCSD2 (MTK_PIN_NO(54) | 2)
+
+#define MT8173_PIN_55_RDN3_A__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8173_PIN_55_RDN3_A__FUNC_CMHSYNC (MTK_PIN_NO(55) | 1)
+#define MT8173_PIN_55_RDN3_A__FUNC_CMCSD1 (MTK_PIN_NO(55) | 2)
+
+#define MT8173_PIN_56_RDP3_A__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8173_PIN_56_RDP3_A__FUNC_CMVSYNC (MTK_PIN_NO(56) | 1)
+#define MT8173_PIN_56_RDP3_A__FUNC_CMCSD0 (MTK_PIN_NO(56) | 2)
+
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(57) | 1)
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_I2S1_WS (MTK_PIN_NO(57) | 2)
+#define MT8173_PIN_57_MSDC0_DAT0__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(57) | 7)
+
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(58) | 1)
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_I2S1_BCK (MTK_PIN_NO(58) | 2)
+#define MT8173_PIN_58_MSDC0_DAT1__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(58) | 7)
+
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(59) | 1)
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_I2S1_MCK (MTK_PIN_NO(59) | 2)
+#define MT8173_PIN_59_MSDC0_DAT2__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(59) | 7)
+
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(60) | 1)
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_I2S1_DO_1 (MTK_PIN_NO(60) | 2)
+#define MT8173_PIN_60_MSDC0_DAT3__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(60) | 7)
+
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(61) | 1)
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_I2S1_DO_2 (MTK_PIN_NO(61) | 2)
+#define MT8173_PIN_61_MSDC0_DAT4__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(61) | 7)
+
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(62) | 1)
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_I2S2_WS (MTK_PIN_NO(62) | 2)
+#define MT8173_PIN_62_MSDC0_DAT5__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(62) | 7)
+
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(63) | 1)
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_I2S2_BCK (MTK_PIN_NO(63) | 2)
+#define MT8173_PIN_63_MSDC0_DAT6__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(63) | 7)
+
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(64) | 1)
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_I2S2_DI_1 (MTK_PIN_NO(64) | 2)
+#define MT8173_PIN_64_MSDC0_DAT7__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(64) | 7)
+
+#define MT8173_PIN_65_MSDC0_CLK__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(65) | 1)
+#define MT8173_PIN_65_MSDC0_CLK__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(65) | 7)
+
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(66) | 1)
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_I2S2_DI_2 (MTK_PIN_NO(66) | 2)
+#define MT8173_PIN_66_MSDC0_CMD__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(66) | 7)
+
+#define MT8173_PIN_67_MSDC0_DSL__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(67) | 1)
+#define MT8173_PIN_67_MSDC0_DSL__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(67) | 7)
+
+#define MT8173_PIN_68_MSDC0_RST___FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB (MTK_PIN_NO(68) | 1)
+#define MT8173_PIN_68_MSDC0_RST___FUNC_I2S2_MCK (MTK_PIN_NO(68) | 2)
+#define MT8173_PIN_68_MSDC0_RST___FUNC_DBG_MON_B_18_ (MTK_PIN_NO(68) | 7)
+
+#define MT8173_PIN_69_SPI_CK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(69) | 1)
+#define MT8173_PIN_69_SPI_CK__FUNC_I2S3_DO_1 (MTK_PIN_NO(69) | 2)
+#define MT8173_PIN_69_SPI_CK__FUNC_PWM0 (MTK_PIN_NO(69) | 3)
+#define MT8173_PIN_69_SPI_CK__FUNC_PWM5 (MTK_PIN_NO(69) | 4)
+#define MT8173_PIN_69_SPI_CK__FUNC_I2S2_MCK (MTK_PIN_NO(69) | 5)
+#define MT8173_PIN_69_SPI_CK__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(69) | 7)
+
+#define MT8173_PIN_70_SPI_MI__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(70) | 1)
+#define MT8173_PIN_70_SPI_MI__FUNC_I2S3_DO_2 (MTK_PIN_NO(70) | 2)
+#define MT8173_PIN_70_SPI_MI__FUNC_PWM1 (MTK_PIN_NO(70) | 3)
+#define MT8173_PIN_70_SPI_MI__FUNC_SPI_MO_0_ (MTK_PIN_NO(70) | 4)
+#define MT8173_PIN_70_SPI_MI__FUNC_I2S2_DI_1 (MTK_PIN_NO(70) | 5)
+#define MT8173_PIN_70_SPI_MI__FUNC_DSI1_TE (MTK_PIN_NO(70) | 6)
+#define MT8173_PIN_70_SPI_MI__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(70) | 7)
+
+#define MT8173_PIN_71_SPI_MO__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(71) | 1)
+#define MT8173_PIN_71_SPI_MO__FUNC_I2S3_DO_3 (MTK_PIN_NO(71) | 2)
+#define MT8173_PIN_71_SPI_MO__FUNC_PWM2 (MTK_PIN_NO(71) | 3)
+#define MT8173_PIN_71_SPI_MO__FUNC_SPI_MI_0_ (MTK_PIN_NO(71) | 4)
+#define MT8173_PIN_71_SPI_MO__FUNC_I2S2_DI_2 (MTK_PIN_NO(71) | 5)
+#define MT8173_PIN_71_SPI_MO__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(71) | 7)
+
+#define MT8173_PIN_72_SPI_CS__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_ (MTK_PIN_NO(72) | 1)
+#define MT8173_PIN_72_SPI_CS__FUNC_I2S3_DO_4 (MTK_PIN_NO(72) | 2)
+#define MT8173_PIN_72_SPI_CS__FUNC_PWM3 (MTK_PIN_NO(72) | 3)
+#define MT8173_PIN_72_SPI_CS__FUNC_PWM6 (MTK_PIN_NO(72) | 4)
+#define MT8173_PIN_72_SPI_CS__FUNC_DISP_PWM1 (MTK_PIN_NO(72) | 5)
+#define MT8173_PIN_72_SPI_CS__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(72) | 7)
+
+#define MT8173_PIN_73_MSDC1_DAT0__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(73) | 1)
+#define MT8173_PIN_73_MSDC1_DAT0__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(73) | 7)
+
+#define MT8173_PIN_74_MSDC1_DAT1__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(74) | 1)
+#define MT8173_PIN_74_MSDC1_DAT1__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(74) | 7)
+
+#define MT8173_PIN_75_MSDC1_DAT2__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(75) | 1)
+#define MT8173_PIN_75_MSDC1_DAT2__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(75) | 7)
+
+#define MT8173_PIN_76_MSDC1_DAT3__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(76) | 1)
+#define MT8173_PIN_76_MSDC1_DAT3__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(76) | 7)
+
+#define MT8173_PIN_77_MSDC1_CLK__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(77) | 1)
+#define MT8173_PIN_77_MSDC1_CLK__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(77) | 7)
+
+#define MT8173_PIN_78_MSDC1_CMD__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(78) | 1)
+#define MT8173_PIN_78_MSDC1_CMD__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(78) | 7)
+
+#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_PWRAP_SPIMI (MTK_PIN_NO(79) | 1)
+#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_PWRAP_SPIMO (MTK_PIN_NO(79) | 2)
+
+#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_PWRAP_SPIMO (MTK_PIN_NO(80) | 1)
+#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_PWRAP_SPIMI (MTK_PIN_NO(80) | 2)
+
+#define MT8173_PIN_81_PWRAP_SPI0_CK__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT8173_PIN_81_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK (MTK_PIN_NO(81) | 1)
+
+#define MT8173_PIN_82_PWRAP_SPI0_CSN__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT8173_PIN_82_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS (MTK_PIN_NO(82) | 1)
+
+#define MT8173_PIN_83_AUD_CLK_MOSI__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT8173_PIN_83_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(83) | 1)
+
+#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(84) | 1)
+#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(84) | 2)
+
+#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(85) | 1)
+#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(85) | 2)
+
+#define MT8173_PIN_86_RTC32K_CK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT8173_PIN_86_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(86) | 1)
+
+#define MT8173_PIN_87_DISP_PWM0__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0 (MTK_PIN_NO(87) | 1)
+#define MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM1 (MTK_PIN_NO(87) | 2)
+#define MT8173_PIN_87_DISP_PWM0__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(87) | 7)
+
+#define MT8173_PIN_88_SRCLKENAI__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT8173_PIN_88_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(88) | 1)
+
+#define MT8173_PIN_89_SRCLKENAI2__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT8173_PIN_89_SRCLKENAI2__FUNC_SRCLKENAI2 (MTK_PIN_NO(89) | 1)
+
+#define MT8173_PIN_90_SRCLKENA0__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT8173_PIN_90_SRCLKENA0__FUNC_SRCLKENA0 (MTK_PIN_NO(90) | 1)
+
+#define MT8173_PIN_91_SRCLKENA1__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT8173_PIN_91_SRCLKENA1__FUNC_SRCLKENA1 (MTK_PIN_NO(91) | 1)
+
+#define MT8173_PIN_92_PCM_CLK__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT8173_PIN_92_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(92) | 1)
+#define MT8173_PIN_92_PCM_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(92) | 2)
+#define MT8173_PIN_92_PCM_CLK__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(92) | 7)
+
+#define MT8173_PIN_93_PCM_SYNC__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT8173_PIN_93_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(93) | 1)
+#define MT8173_PIN_93_PCM_SYNC__FUNC_I2S0_WS (MTK_PIN_NO(93) | 2)
+#define MT8173_PIN_93_PCM_SYNC__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(93) | 7)
+
+#define MT8173_PIN_94_PCM_RX__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT8173_PIN_94_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(94) | 1)
+#define MT8173_PIN_94_PCM_RX__FUNC_I2S0_DI (MTK_PIN_NO(94) | 2)
+#define MT8173_PIN_94_PCM_RX__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(94) | 7)
+
+#define MT8173_PIN_95_PCM_TX__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT8173_PIN_95_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(95) | 1)
+#define MT8173_PIN_95_PCM_TX__FUNC_I2S0_DO (MTK_PIN_NO(95) | 2)
+#define MT8173_PIN_95_PCM_TX__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(95) | 7)
+
+#define MT8173_PIN_96_URXD1__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT8173_PIN_96_URXD1__FUNC_URXD1 (MTK_PIN_NO(96) | 1)
+#define MT8173_PIN_96_URXD1__FUNC_UTXD1 (MTK_PIN_NO(96) | 2)
+#define MT8173_PIN_96_URXD1__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(96) | 7)
+
+#define MT8173_PIN_97_UTXD1__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT8173_PIN_97_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(97) | 1)
+#define MT8173_PIN_97_UTXD1__FUNC_URXD1 (MTK_PIN_NO(97) | 2)
+#define MT8173_PIN_97_UTXD1__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(97) | 7)
+
+#define MT8173_PIN_98_URTS1__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT8173_PIN_98_URTS1__FUNC_URTS1 (MTK_PIN_NO(98) | 1)
+#define MT8173_PIN_98_URTS1__FUNC_UCTS1 (MTK_PIN_NO(98) | 2)
+#define MT8173_PIN_98_URTS1__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(98) | 7)
+
+#define MT8173_PIN_99_UCTS1__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT8173_PIN_99_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(99) | 1)
+#define MT8173_PIN_99_UCTS1__FUNC_URTS1 (MTK_PIN_NO(99) | 2)
+#define MT8173_PIN_99_UCTS1__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(99) | 7)
+
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(100) | 1)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(100) | 3)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5 (MTK_PIN_NO(100) | 4)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(100) | 5)
+#define MT8173_PIN_100_MSDC2_DAT0__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(100) | 7)
+
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(101) | 1)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_AUD_SPDIF (MTK_PIN_NO(101) | 3)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5 (MTK_PIN_NO(101) | 4)
+#define MT8173_PIN_101_MSDC2_DAT1__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(101) | 7)
+
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(102) | 1)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_UTXD0 (MTK_PIN_NO(102) | 3)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_PWM0 (MTK_PIN_NO(102) | 5)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_ (MTK_PIN_NO(102) | 6)
+#define MT8173_PIN_102_MSDC2_DAT2__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(102) | 7)
+
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(103) | 1)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_URXD0 (MTK_PIN_NO(103) | 3)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_PWM1 (MTK_PIN_NO(103) | 5)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_ (MTK_PIN_NO(103) | 6)
+#define MT8173_PIN_103_MSDC2_DAT3__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(103) | 7)
+
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(104) | 1)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_UTXD3 (MTK_PIN_NO(104) | 3)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 4)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_PWM2 (MTK_PIN_NO(104) | 5)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_ (MTK_PIN_NO(104) | 6)
+#define MT8173_PIN_104_MSDC2_CLK__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(104) | 7)
+
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(105) | 1)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_URXD3 (MTK_PIN_NO(105) | 3)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_SCL3 (MTK_PIN_NO(105) | 4)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_PWM3 (MTK_PIN_NO(105) | 5)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_ (MTK_PIN_NO(105) | 6)
+#define MT8173_PIN_105_MSDC2_CMD__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(105) | 7)
+
+#define MT8173_PIN_106_SDA3__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8173_PIN_106_SDA3__FUNC_SDA3 (MTK_PIN_NO(106) | 1)
+
+#define MT8173_PIN_107_SCL3__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8173_PIN_107_SCL3__FUNC_SCL3 (MTK_PIN_NO(107) | 1)
+
+#define MT8173_PIN_108_JTMS__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8173_PIN_108_JTMS__FUNC_JTMS (MTK_PIN_NO(108) | 1)
+#define MT8173_PIN_108_JTMS__FUNC_MFG_JTAG_TMS (MTK_PIN_NO(108) | 2)
+#define MT8173_PIN_108_JTMS__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(108) | 5)
+#define MT8173_PIN_108_JTMS__FUNC_DFD_TMS (MTK_PIN_NO(108) | 6)
+
+#define MT8173_PIN_109_JTCK__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8173_PIN_109_JTCK__FUNC_JTCK (MTK_PIN_NO(109) | 1)
+#define MT8173_PIN_109_JTCK__FUNC_MFG_JTAG_TCK (MTK_PIN_NO(109) | 2)
+#define MT8173_PIN_109_JTCK__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(109) | 5)
+#define MT8173_PIN_109_JTCK__FUNC_DFD_TCK (MTK_PIN_NO(109) | 6)
+
+#define MT8173_PIN_110_JTDI__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8173_PIN_110_JTDI__FUNC_JTDI (MTK_PIN_NO(110) | 1)
+#define MT8173_PIN_110_JTDI__FUNC_MFG_JTAG_TDI (MTK_PIN_NO(110) | 2)
+#define MT8173_PIN_110_JTDI__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(110) | 5)
+#define MT8173_PIN_110_JTDI__FUNC_DFD_TDI (MTK_PIN_NO(110) | 6)
+
+#define MT8173_PIN_111_JTDO__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8173_PIN_111_JTDO__FUNC_JTDO (MTK_PIN_NO(111) | 1)
+#define MT8173_PIN_111_JTDO__FUNC_MFG_JTAG_TDO (MTK_PIN_NO(111) | 2)
+#define MT8173_PIN_111_JTDO__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(111) | 5)
+#define MT8173_PIN_111_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(111) | 6)
+
+#define MT8173_PIN_112_JTRST_B__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8173_PIN_112_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(112) | 1)
+#define MT8173_PIN_112_JTRST_B__FUNC_MFG_JTAG_TRSTN (MTK_PIN_NO(112) | 2)
+#define MT8173_PIN_112_JTRST_B__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(112) | 5)
+#define MT8173_PIN_112_JTRST_B__FUNC_DFD_NTRST (MTK_PIN_NO(112) | 6)
+
+#define MT8173_PIN_113_URXD0__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8173_PIN_113_URXD0__FUNC_URXD0 (MTK_PIN_NO(113) | 1)
+#define MT8173_PIN_113_URXD0__FUNC_UTXD0 (MTK_PIN_NO(113) | 2)
+#define MT8173_PIN_113_URXD0__FUNC_I2S2_WS (MTK_PIN_NO(113) | 6)
+#define MT8173_PIN_113_URXD0__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(113) | 7)
+
+#define MT8173_PIN_114_UTXD0__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8173_PIN_114_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(114) | 1)
+#define MT8173_PIN_114_UTXD0__FUNC_URXD0 (MTK_PIN_NO(114) | 2)
+#define MT8173_PIN_114_UTXD0__FUNC_I2S2_BCK (MTK_PIN_NO(114) | 6)
+#define MT8173_PIN_114_UTXD0__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(114) | 7)
+
+#define MT8173_PIN_115_URTS0__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8173_PIN_115_URTS0__FUNC_URTS0 (MTK_PIN_NO(115) | 1)
+#define MT8173_PIN_115_URTS0__FUNC_UCTS0 (MTK_PIN_NO(115) | 2)
+#define MT8173_PIN_115_URTS0__FUNC_I2S2_MCK (MTK_PIN_NO(115) | 6)
+#define MT8173_PIN_115_URTS0__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(115) | 7)
+
+#define MT8173_PIN_116_UCTS0__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8173_PIN_116_UCTS0__FUNC_UCTS0 (MTK_PIN_NO(116) | 1)
+#define MT8173_PIN_116_UCTS0__FUNC_URTS0 (MTK_PIN_NO(116) | 2)
+#define MT8173_PIN_116_UCTS0__FUNC_I2S2_DI_1 (MTK_PIN_NO(116) | 6)
+#define MT8173_PIN_116_UCTS0__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(116) | 7)
+
+#define MT8173_PIN_117_URXD3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8173_PIN_117_URXD3__FUNC_URXD3 (MTK_PIN_NO(117) | 1)
+#define MT8173_PIN_117_URXD3__FUNC_UTXD3 (MTK_PIN_NO(117) | 2)
+#define MT8173_PIN_117_URXD3__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(117) | 7)
+
+#define MT8173_PIN_118_UTXD3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8173_PIN_118_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(118) | 1)
+#define MT8173_PIN_118_UTXD3__FUNC_URXD3 (MTK_PIN_NO(118) | 2)
+#define MT8173_PIN_118_UTXD3__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(118) | 7)
+
+#define MT8173_PIN_119_KPROW0__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8173_PIN_119_KPROW0__FUNC_KROW0 (MTK_PIN_NO(119) | 1)
+#define MT8173_PIN_119_KPROW0__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(119) | 7)
+
+#define MT8173_PIN_120_KPROW1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8173_PIN_120_KPROW1__FUNC_KROW1 (MTK_PIN_NO(120) | 1)
+#define MT8173_PIN_120_KPROW1__FUNC_PWM6 (MTK_PIN_NO(120) | 3)
+#define MT8173_PIN_120_KPROW1__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(120) | 7)
+
+#define MT8173_PIN_121_KPROW2__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8173_PIN_121_KPROW2__FUNC_KROW2 (MTK_PIN_NO(121) | 1)
+#define MT8173_PIN_121_KPROW2__FUNC_IRDA_PDN (MTK_PIN_NO(121) | 2)
+#define MT8173_PIN_121_KPROW2__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(121) | 3)
+#define MT8173_PIN_121_KPROW2__FUNC_PWM4 (MTK_PIN_NO(121) | 4)
+#define MT8173_PIN_121_KPROW2__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(121) | 5)
+#define MT8173_PIN_121_KPROW2__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(121) | 7)
+
+#define MT8173_PIN_122_KPCOL0__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8173_PIN_122_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(122) | 1)
+#define MT8173_PIN_122_KPCOL0__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(122) | 7)
+
+#define MT8173_PIN_123_KPCOL1__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8173_PIN_123_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(123) | 1)
+#define MT8173_PIN_123_KPCOL1__FUNC_IRDA_RXD (MTK_PIN_NO(123) | 2)
+#define MT8173_PIN_123_KPCOL1__FUNC_PWM5 (MTK_PIN_NO(123) | 3)
+#define MT8173_PIN_123_KPCOL1__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(123) | 7)
+
+#define MT8173_PIN_124_KPCOL2__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8173_PIN_124_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(124) | 1)
+#define MT8173_PIN_124_KPCOL2__FUNC_IRDA_TXD (MTK_PIN_NO(124) | 2)
+#define MT8173_PIN_124_KPCOL2__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(124) | 3)
+#define MT8173_PIN_124_KPCOL2__FUNC_PWM3 (MTK_PIN_NO(124) | 4)
+#define MT8173_PIN_124_KPCOL2__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(124) | 5)
+#define MT8173_PIN_124_KPCOL2__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(124) | 7)
+
+#define MT8173_PIN_125_SDA1__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT8173_PIN_125_SDA1__FUNC_SDA1 (MTK_PIN_NO(125) | 1)
+
+#define MT8173_PIN_126_SCL1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT8173_PIN_126_SCL1__FUNC_SCL1 (MTK_PIN_NO(126) | 1)
+
+#define MT8173_PIN_127_LCM_RST__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT8173_PIN_127_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(127) | 1)
+
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S0_WS (MTK_PIN_NO(128) | 1)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS (MTK_PIN_NO(128) | 2)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S2_WS (MTK_PIN_NO(128) | 3)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_SPI_CK_2_ (MTK_PIN_NO(128) | 5)
+#define MT8173_PIN_128_I2S0_LRCK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(128) | 7)
+
+#define MT8173_PIN_129_I2S0_BCK__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(129) | 1)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(129) | 2)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S2_BCK (MTK_PIN_NO(129) | 3)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 5)
+#define MT8173_PIN_129_I2S0_BCK__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(129) | 7)
+
+#define MT8173_PIN_130_I2S0_MCK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S0_MCK (MTK_PIN_NO(130) | 1)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK (MTK_PIN_NO(130) | 2)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S2_MCK (MTK_PIN_NO(130) | 3)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_SPI_MO_2_ (MTK_PIN_NO(130) | 5)
+#define MT8173_PIN_130_I2S0_MCK__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(130) | 7)
+
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S0_DO (MTK_PIN_NO(131) | 1)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1 (MTK_PIN_NO(131) | 2)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S2_DI_1 (MTK_PIN_NO(131) | 3)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_SPI_CS_2_ (MTK_PIN_NO(131) | 5)
+#define MT8173_PIN_131_I2S0_DATA0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(131) | 7)
+
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S0_DI (MTK_PIN_NO(132) | 1)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S1_DO_2 (MTK_PIN_NO(132) | 2)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2 (MTK_PIN_NO(132) | 3)
+#define MT8173_PIN_132_I2S0_DATA1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(132) | 7)
+
+#define MT8173_PIN_133_SDA4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT8173_PIN_133_SDA4__FUNC_SDA4 (MTK_PIN_NO(133) | 1)
+
+#define MT8173_PIN_134_SCL4__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT8173_PIN_134_SCL4__FUNC_SCL4 (MTK_PIN_NO(134) | 1)
+
+#endif /* __DTS_MT8173_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
new file mode 100644
index 000000000..c47d7d900
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -0,0 +1,1523 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt8173-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt8173-larb-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt8173-power.h>
+#include <dt-bindings/reset/mt8173-resets.h>
+#include <dt-bindings/gce/mt8173-gce.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "mt8173-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8173";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl1 = &ovl1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		rdma2 = &rdma2;
+		wdma0 = &wdma0;
+		wdma1 = &wdma1;
+		color0 = &color0;
+		color1 = &color1;
+		split0 = &split0;
+		split1 = &split1;
+		dpi0 = &dpi0;
+		dsi0 = &dsi0;
+		dsi1 = &dsi1;
+		mdp-rdma0 = &mdp_rdma0;
+		mdp-rdma1 = &mdp_rdma1;
+		mdp-rsz0 = &mdp_rsz0;
+		mdp-rsz1 = &mdp_rsz1;
+		mdp-rsz2 = &mdp_rsz2;
+		mdp-wdma0 = &mdp_wdma0;
+		mdp-wrot0 = &mdp_wrot0;
+		mdp-wrot1 = &mdp_wrot1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <859000>;
+		};
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <908000>;
+		};
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <983000>;
+		};
+		opp-1105000000 {
+			opp-hz = /bits/ 64 <1105000000>;
+			opp-microvolt = <1009000>;
+		};
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <1034000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1057000>;
+		};
+		opp-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <1109000>;
+		};
+		opp-1703000000 {
+			opp-hz = /bits/ 64 <1703000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <828000>;
+		};
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <867000>;
+		};
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <927000>;
+		};
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <968000>;
+		};
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <1007000>;
+		};
+		opp-1612000000 {
+			opp-hz = /bits/ 64 <1612000000>;
+			opp-microvolt = <1049000>;
+		};
+		opp-1807000000 {
+			opp-hz = /bits/ 64 <1807000000>;
+			opp-microvolt = <1089000>;
+		};
+		opp-2106000000 {
+			opp-hz = /bits/ 64 <2106000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
+			clocks = <&infracfg CLK_INFRA_CA53SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <740>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <263>;
+			clocks = <&infracfg CLK_INFRA_CA53SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <740>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
+			clocks = <&infracfg CLK_INFRA_CA72SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <530>;
+			clocks = <&infracfg CLK_INFRA_CA72SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <639>;
+				exit-latency-us = <680>;
+				min-residency-us = <1088>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+		};
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off	 = <0x84000002>;
+		cpu_on	 = <0x84000003>;
+	};
+
+	clk26m: oscillator0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	cpum_ck: oscillator2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "cpum_ck";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&thermal>;
+			sustainable-power = <1500>; /* milliwatts */
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit0 {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu2 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT
+							  THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		vpu_dma_reserved: vpu_dma_mem_region@b7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xb7000000 0 0x500000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: clock-controller@10000000 {
+			compatible = "mediatek,mt8173-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: power-controller@10001000 {
+			compatible = "mediatek,mt8173-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: power-controller@10003000 {
+			compatible = "mediatek,mt8173-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+			compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8173-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl_a>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+
+			hdmi_pin: xxx {
+
+				/*hdmi htplg pin*/
+				pins1 {
+					pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
+
+			i2c0_pins_a: i2c0 {
+				pins1 {
+					pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>,
+						 <MT8173_PIN_46_SCL0__FUNC_SCL0>;
+					bias-disable;
+				};
+			};
+
+			i2c1_pins_a: i2c1 {
+				pins1 {
+					pinmux = <MT8173_PIN_125_SDA1__FUNC_SDA1>,
+						 <MT8173_PIN_126_SCL1__FUNC_SCL1>;
+					bias-disable;
+				};
+			};
+
+			i2c2_pins_a: i2c2 {
+				pins1 {
+					pinmux = <MT8173_PIN_43_SDA2__FUNC_SDA2>,
+						 <MT8173_PIN_44_SCL2__FUNC_SCL2>;
+					bias-disable;
+				};
+			};
+
+			i2c3_pins_a: i2c3 {
+				pins1 {
+					pinmux = <MT8173_PIN_106_SDA3__FUNC_SDA3>,
+						 <MT8173_PIN_107_SCL3__FUNC_SCL3>;
+					bias-disable;
+				};
+			};
+
+			i2c4_pins_a: i2c4 {
+				pins1 {
+					pinmux = <MT8173_PIN_133_SDA4__FUNC_SDA4>,
+						 <MT8173_PIN_134_SCL4__FUNC_SCL4>;
+					bias-disable;
+				};
+			};
+
+			i2c6_pins_a: i2c6 {
+				pins1 {
+					pinmux = <MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5>,
+						 <MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5>;
+					bias-disable;
+				};
+			};
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8173-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8173_POWER_DOMAIN_VDEC {
+					reg = <MT8173_POWER_DOMAIN_VDEC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_VENC {
+					reg = <MT8173_POWER_DOMAIN_VENC>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_SEL>;
+					clock-names = "mm", "venc";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_ISP {
+					reg = <MT8173_POWER_DOMAIN_ISP>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_MM {
+					reg = <MT8173_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>;
+					clock-names = "mm";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_VENC_LT {
+					reg = <MT8173_POWER_DOMAIN_VENC_LT>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&topckgen CLK_TOP_VENC_LT_SEL>;
+					clock-names = "mm", "venclt";
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_AUDIO {
+					reg = <MT8173_POWER_DOMAIN_AUDIO>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@MT8173_POWER_DOMAIN_USB {
+					reg = <MT8173_POWER_DOMAIN_USB>;
+					#power-domain-cells = <0>;
+				};
+				mfg_async: power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&clk26m>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8173_POWER_DOMAIN_MFG_2D {
+						reg = <MT8173_POWER_DOMAIN_MFG_2D>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8173_POWER_DOMAIN_MFG {
+							reg = <MT8173_POWER_DOMAIN_MFG>;
+							#power-domain-cells = <0>;
+							mediatek,infracfg = <&infracfg>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8173-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8173-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CLK_13M>,
+				 <&topckgen CLK_TOP_RTC_SEL>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8173-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8173_INFRA_PMIC_WRAP_RST>;
+			reset-names = "pwrap";
+			clocks = <&infracfg CLK_INFRA_PMICSPI>, <&infracfg CLK_INFRA_PMICWRAP>;
+			clock-names = "spi", "wrap";
+		};
+
+		cec: cec@10013000 {
+			compatible = "mediatek,mt8173-cec";
+			reg = <0 0x10013000 0 0xbc>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CEC>;
+			status = "disabled";
+		};
+
+		vpu: vpu@10020000 {
+			compatible = "mediatek,mt8173-vpu";
+			reg = <0 0x10020000 0 0x30000>,
+			      <0 0x10050000 0 0x100>;
+			reg-names = "tcm", "cfg_reg";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_SCP_SEL>;
+			clock-names = "main";
+			memory-region = <&vpu_dma_reserved>;
+		};
+
+		sysirq: intpol-controller@10200620 {
+			compatible = "mediatek,mt8173-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8173-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			mediatek,infracfg = <&infracfg>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+					 <&larb3>, <&larb4>, <&larb5>;
+			#iommu-cells = <1>;
+		};
+
+		efuse: efuse@10206000 {
+			compatible = "mediatek,mt8173-efuse";
+			reg = <0 0x10206000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			thermal_calibration: calib@528 {
+				reg = <0x528 0xc>;
+			};
+		};
+
+		apmixedsys: clock-controller@10209000 {
+			compatible = "mediatek,mt8173-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		hdmi_phy: hdmi-phy@10209100 {
+			compatible = "mediatek,mt8173-hdmi-phy";
+			reg = <0 0x10209100 0 0x24>;
+			clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>;
+			clock-names = "pll_ref";
+			clock-output-names = "hdmitx_dig_cts";
+			mediatek,ibias = <0xa>;
+			mediatek,ibias_up = <0x1c>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gce: mailbox@10212000 {
+			compatible = "mediatek,mt8173-gce";
+			reg = <0 0x10212000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+			#mbox-cells = <2>;
+		};
+
+		mipi_tx0: dsi-phy@10215000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10215000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx0_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		mipi_tx1: dsi-phy@10216000 {
+			compatible = "mediatek,mt8173-mipi-tx";
+			reg = <0 0x10216000 0 0x1000>;
+			clocks = <&clk26m>;
+			clock-output-names = "mipi_tx1_pll";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10221000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10221000 0 0x1000>,
+			      <0 0x10222000 0 0x2000>,
+			      <0 0x10224000 0 0x2000>,
+			      <0 0x10226000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		auxadc: auxadc@11001000 {
+			compatible = "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt8173-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11007000 0 0x70>,
+			      <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C0>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11008000 0 0x70>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C1>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11009000 0 0x70>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C2>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8173-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&pericfg CLK_PERI_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <0>;
+			compatible = "mediatek,mt8173-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		nor_flash: spi@1100d000 {
+			compatible = "mediatek,mt8173-nor";
+			reg = <0 0x1100d000 0 0xe0>;
+			assigned-clocks = <&topckgen CLK_TOP_SPI_SEL>;
+			assigned-clock-parents = <&clk26m>;
+			clocks = <&pericfg CLK_PERI_SPI>,
+				 <&topckgen CLK_TOP_SPINFI_IFR_SEL>,
+				 <&pericfg CLK_PERI_NFI>;
+			clock-names = "spi", "sf", "axi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11010000 0 0x70>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C3>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11011000 0 0x70>,
+			      <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C4>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hdmiddc0: i2c@11012000 {
+			compatible = "mediatek,mt8173-hdmi-ddc";
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			reg = <0 0x11012000 0 0x1C>;
+			clocks = <&pericfg CLK_PERI_I2C5>;
+			clock-names = "ddc-i2c";
+		};
+
+		i2c6: i2c@11013000 {
+			compatible = "mediatek,mt8173-i2c";
+			reg = <0 0x11013000 0 0x70>,
+			      <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <16>;
+			clocks = <&pericfg CLK_PERI_I2C6>,
+				 <&pericfg CLK_PERI_AP_DMA>;
+			clock-names = "main", "dma";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins_a>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		afe: audio-controller@11220000  {
+			compatible = "mediatek,mt8173-afe-pcm";
+			reg = <0 0x11220000 0 0x1000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_AUDIO>;
+			clocks = <&infracfg CLK_INFRA_AUDIO>,
+				 <&topckgen CLK_TOP_AUDIO_SEL>,
+				 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+				 <&topckgen CLK_TOP_APLL1_DIV0>,
+				 <&topckgen CLK_TOP_APLL2_DIV0>,
+				 <&topckgen CLK_TOP_I2S0_M_SEL>,
+				 <&topckgen CLK_TOP_I2S1_M_SEL>,
+				 <&topckgen CLK_TOP_I2S2_M_SEL>,
+				 <&topckgen CLK_TOP_I2S3_M_SEL>,
+				 <&topckgen CLK_TOP_I2S3_B_SEL>;
+			clock-names = "infra_sys_audio_clk",
+				      "top_pdn_audio",
+				      "top_pdn_aud_intbus",
+				      "bck0",
+				      "bck1",
+				      "i2s0_m",
+				      "i2s1_m",
+				      "i2s2_m",
+				      "i2s3_m",
+				      "i2s3_b";
+			assigned-clocks = <&topckgen CLK_TOP_AUD_1_SEL>,
+					  <&topckgen CLK_TOP_AUD_2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_APLL1>,
+						 <&topckgen CLK_TOP_APLL2>;
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11230000 0 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_0>,
+				 <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11240000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_1>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11250000 0 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_2>,
+				 <&topckgen CLK_TOP_AXI_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		mmc3: mmc@11260000 {
+			compatible = "mediatek,mt8173-mmc";
+			reg = <0 0x11260000 0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&pericfg CLK_PERI_MSDC30_3>,
+				 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+			clock-names = "source", "hclk";
+			status = "disabled";
+		};
+
+		ssusb: usb@11271000 {
+			compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
+			reg = <0 0x11271000 0 0x3000>,
+			      <0 0x11280700 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11270000 {
+				compatible = "mediatek,mt8173-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11270000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+				power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
+				clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
+		u3phy: t-phy@11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "okay";
+
+			u2port0: usb-phy@11290800 {
+				reg = <0 0x11290800 0 0x100>;
+				clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@11290900 {
+				reg = <0 0x11290900 0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u2port1: usb-phy@11291000 {
+				reg = <0 0x11291000 0 0x100>;
+				clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8173-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+			assigned-clock-rates = <400000000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mdp_rdma0: rdma@14001000 {
+			compatible = "mediatek,mt8173-mdp-rdma",
+				     "mediatek,mt8173-mdp";
+			reg = <0 0x14001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MUTEX_32K>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mediatek,vpu = <&vpu>;
+		};
+
+		mdp_rdma1: rdma@14002000 {
+			compatible = "mediatek,mt8173-mdp-rdma";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+				 <&mmsys CLK_MM_MUTEX_32K>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+		};
+
+		mdp_rsz0: rsz@14003000 {
+			compatible = "mediatek,mt8173-mdp-rsz";
+			reg = <0 0x14003000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+		};
+
+		mdp_rsz1: rsz@14004000 {
+			compatible = "mediatek,mt8173-mdp-rsz";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+		};
+
+		mdp_rsz2: rsz@14005000 {
+			compatible = "mediatek,mt8173-mdp-rsz";
+			reg = <0 0x14005000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+		};
+
+		mdp_wdma0: wdma@14006000 {
+			compatible = "mediatek,mt8173-mdp-wdma";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA>;
+		};
+
+		mdp_wrot0: wrot@14007000 {
+			compatible = "mediatek,mt8173-mdp-wrot";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+		};
+
+		mdp_wrot1: wrot@14008000 {
+			compatible = "mediatek,mt8173-mdp-wrot";
+			reg = <0 0x14008000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MDP_WROT1>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			iommus = <&iommu M4U_PORT_MDP_WROT1>;
+		};
+
+		ovl0: ovl@1400c000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		ovl1: ovl@1400d000 {
+			compatible = "mediatek,mt8173-disp-ovl";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1>;
+			iommus = <&iommu M4U_PORT_DISP_OVL1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		rdma0: rdma@1400e000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		rdma1: rdma@1400f000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		rdma2: rdma@14010000 {
+			compatible = "mediatek,mt8173-disp-rdma";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA2>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA2>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+		};
+
+		wdma0: wdma@14011000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+		};
+
+		wdma1: wdma@14012000 {
+			compatible = "mediatek,mt8173-disp-wdma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_WDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_WDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@14013000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+		};
+
+		color1: color@14014000 {
+			compatible = "mediatek,mt8173-disp-color";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		aal@14015000 {
+			compatible = "mediatek,mt8173-disp-aal";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_AAL>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
+		gamma@14016000 {
+			compatible = "mediatek,mt8173-disp-gamma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+		};
+
+		merge@14017000 {
+			compatible = "mediatek,mt8173-disp-merge";
+			reg = <0 0x14017000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_MERGE>;
+		};
+
+		split0: split@14018000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14018000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+		};
+
+		split1: split@14019000 {
+			compatible = "mediatek,mt8173-disp-split";
+			reg = <0 0x14019000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_SPLIT1>;
+		};
+
+		ufoe@1401a000 {
+			compatible = "mediatek,mt8173-disp-ufoe";
+			reg = <0 0x1401a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
+		};
+
+		dsi0: dsi@1401b000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401b000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI0_ENGINE>,
+				 <&mmsys CLK_MM_DSI0_DIGITAL>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dsi1: dsi@1401c000 {
+			compatible = "mediatek,mt8173-dsi";
+			reg = <0 0x1401c000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DSI1_ENGINE>,
+				 <&mmsys CLK_MM_DSI1_DIGITAL>,
+				 <&mipi_tx1>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx1>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		dpi0: dpi@1401d000 {
+			compatible = "mediatek,mt8173-dpi";
+			reg = <0 0x1401d000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+				 <&mmsys CLK_MM_DPI_ENGINE>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+
+			port {
+				dpi0_out: endpoint {
+					remote-endpoint = <&hdmi0_in>;
+				};
+			};
+		};
+
+		pwm0: pwm@1401e000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+				 <&mmsys CLK_MM_DISP_PWM0MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		pwm1: pwm@1401f000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401f000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
+				 <&mmsys CLK_MM_DISP_PWM1MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		mutex: mutex@14020000 {
+			compatible = "mediatek,mt8173-disp-mutex";
+			reg = <0 0x14020000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MUTEX_32K>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
+                                              <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
+		};
+
+		larb0: larb@14021000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+		};
+
+		smi_common: smi@14022000 {
+			compatible = "mediatek,mt8173-smi-common";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		od@14023000 {
+			compatible = "mediatek,mt8173-disp-od";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OD>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
+		};
+
+		hdmi0: hdmi@14025000 {
+			compatible = "mediatek,mt8173-hdmi";
+			reg = <0 0x14025000 0 0x400>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+				 <&mmsys CLK_MM_HDMI_PLLCK>,
+				 <&mmsys CLK_MM_HDMI_AUDIO>,
+				 <&mmsys CLK_MM_HDMI_SPDIF>;
+			clock-names = "pixel", "pll", "bclk", "spdif";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pin>;
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi";
+			mediatek,syscon-hdmi = <&mmsys 0x900>;
+			assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>;
+			assigned-clock-parents = <&hdmi_phy>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					hdmi0_in: endpoint {
+						remote-endpoint = <&dpi0_out>;
+					};
+				};
+			};
+		};
+
+		larb4: larb@14027000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14027000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB4>,
+				 <&mmsys CLK_MM_SMI_LARB4>;
+			clock-names = "apb", "smi";
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8173-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_ISP>;
+			clocks = <&imgsys CLK_IMG_LARB2_SMI>,
+				 <&imgsys CLK_IMG_LARB2_SMI>;
+			clock-names = "apb", "smi";
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8173-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vcodec_dec: vcodec@16000000 {
+			compatible = "mediatek,mt8173-vcodec-dec";
+			reg = <0 0x16000000 0 0x100>,	/* VDEC_SYS */
+			      <0 0x16020000 0 0x1000>,	/* VDEC_MISC */
+			      <0 0x16021000 0 0x800>,	/* VDEC_LD */
+			      <0 0x16021800 0 0x800>,	/* VDEC_TOP */
+			      <0 0x16022000 0 0x1000>,	/* VDEC_CM */
+			      <0 0x16023000 0 0x1000>,	/* VDEC_AD */
+			      <0 0x16024000 0 0x1000>,	/* VDEC_AV */
+			      <0 0x16025000 0 0x1000>,	/* VDEC_PP */
+			      <0 0x16026800 0 0x800>,	/* VDEC_HWD */
+			      <0 0x16027000 0 0x800>,	/* VDEC_HWQ */
+			      <0 0x16027800 0 0x800>,	/* VDEC_HWB */
+			      <0 0x16028400 0 0x400>;	/* VDEC_HWG */
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+				 <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+			mediatek,vpu = <&vpu>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+				 <&topckgen CLK_TOP_UNIVPLL_D2>,
+				 <&topckgen CLK_TOP_CCI400_SEL>,
+				 <&topckgen CLK_TOP_VDEC_SEL>,
+				 <&topckgen CLK_TOP_VCODECPLL>,
+				 <&apmixedsys CLK_APMIXED_VENCPLL>,
+				 <&topckgen CLK_TOP_VENC_LT_SEL>,
+				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
+			clock-names = "vcodecpll",
+				      "univpll_d2",
+				      "clk_cci400_sel",
+				      "vdec_sel",
+				      "vdecpll",
+				      "vencpll",
+				      "venc_lt_sel",
+				      "vdec_bus_clk_src";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+					  <&topckgen CLK_TOP_CCI400_SEL>,
+					  <&topckgen CLK_TOP_VDEC_SEL>,
+					  <&apmixedsys CLK_APMIXED_VCODECPLL>,
+					  <&apmixedsys CLK_APMIXED_VENCPLL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+						 <&topckgen CLK_TOP_UNIVPLL_D2>,
+						 <&topckgen CLK_TOP_VCODECPLL>;
+			assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt8173-vencsys", "syscon";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@18001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_CKE1>,
+				 <&vencsys CLK_VENC_CKE0>;
+			clock-names = "apb", "smi";
+		};
+
+		vcodec_enc_avc: vcodec@18002000 {
+			compatible = "mediatek,mt8173-vcodec-enc";
+			reg = <0 0x18002000 0 0x1000>;	/* VENC_SYS */
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_VENC_RCPU>,
+				 <&iommu M4U_PORT_VENC_REC>,
+				 <&iommu M4U_PORT_VENC_BSDMA>,
+				 <&iommu M4U_PORT_VENC_SV_COMV>,
+				 <&iommu M4U_PORT_VENC_RD_COMV>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA>,
+				 <&iommu M4U_PORT_VENC_REF_CHROMA>,
+				 <&iommu M4U_PORT_VENC_NBM_RDMA>,
+				 <&iommu M4U_PORT_VENC_NBM_WDMA>;
+			mediatek,vpu = <&vpu>;
+			clocks = <&topckgen CLK_TOP_VENC_SEL>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
+		};
+
+		jpegdec: jpegdec@18004000 {
+			compatible = "mediatek,mt8173-jpgdec";
+			reg = <0 0x18004000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&vencsys CLK_VENC_CKE0>,
+				 <&vencsys CLK_VENC_CKE3>;
+			clock-names = "jpgdec-smi",
+				      "jpgdec";
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
+			iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
+				 <&iommu M4U_PORT_JPGDEC_BSDMA>;
+		};
+
+		vencltsys: clock-controller@19000000 {
+			compatible = "mediatek,mt8173-vencltsys", "syscon";
+			reg = <0 0x19000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb5: larb@19001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x19001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>;
+			clocks = <&vencltsys CLK_VENCLT_CKE1>,
+				 <&vencltsys CLK_VENCLT_CKE0>;
+			clock-names = "apb", "smi";
+		};
+
+		vcodec_enc_vp8: vcodec@19002000 {
+			compatible = "mediatek,mt8173-vcodec-enc-vp8";
+			reg = <0 0x19002000 0 0x1000>; /* VENC_LT_SYS */
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+				 <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+				 <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+				 <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+				 <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+				 <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+				 <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+				 <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+				 <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+			mediatek,vpu = <&vpu>;
+			clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+			clock-names = "venc_lt_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+			assigned-clock-parents =
+				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
+			power-domains = <&spm MT8173_POWER_DOMAIN_VENC_LT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
new file mode 100644
index 000000000..77f9ab94c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	model = "MediaTek MT8183 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	thermal-sensor {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <390000>;
+		pulldown-ohm = <0>;
+		io-channels = <&auxadc 0>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&mt6358_vgpu_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_1>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_3>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_4>;
+	status = "okay";
+	clock-frequency = <1000000>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_5>;
+	status = "okay";
+	clock-frequency = <1000000>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	vmmc-supply = <&mt6358_vmch_reg>;
+	vqmmc-supply = <&mt6358_vmc_reg>;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+};
+
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&pio {
+	i2c_pins_0: i2c0 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_1: i2c1 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_2: i2c2 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_3: i2c3 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_4: i2c4 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_5: i2c5 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	spi_pins_0: spi0 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+				 <PINMUX_GPIO86__FUNC_SPI0_CSB>,
+				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
+				 <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0 {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				   <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				   <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				   <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			bias-pull-down;
+		};
+
+		pins_pmu {
+			pinmux = <PINMUX_GPIO178__FUNC_GPIO178>,
+				   <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-high;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1 {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				   <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				   <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				   <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			input-enable;
+		};
+	};
+
+	spi_pins_1: spi1 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_2: spi2 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
+				 <PINMUX_GPIO2__FUNC_SPI2_CLK>,
+				 <PINMUX_GPIO94__FUNC_SPI2_MI>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_3: spi3 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
+				 <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_4: spi4 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
+				 <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi_pins_5: spi5 {
+		pins_spi {
+			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
+				 <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+			bias-disable;
+		};
+	};
+
+	pwm_pins_1: pwm1 {
+		pins_pwm {
+			pinmux = <PINMUX_GPIO90__FUNC_PWM_A>;
+		};
+	};
+};
+
+&mfg {
+	domain-supply = <&mt6358_vgpu_reg>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_0>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_1>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_2>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_3>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_4>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_5>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+};
+
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+	pinctrl-0 = <&pwm_pins_1>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi
new file mode 100644
index 000000000..e4aeea459
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) da7219-max98357a sound card.
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-da7219.dtsi"
+#include "mt8183-kukui-audio-max98357a.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_da7219_max98357";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi
new file mode 100644
index 000000000..16ce5a361
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) da7219-rt1015p sound card.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-da7219.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_da7219_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
new file mode 100644
index 000000000..2c69e7658
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for da7219.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+&i2c5 {
+	da7219: da7219@1a {
+		pinctrl-names = "default";
+		pinctrl-0 = <&da7219_pins>;
+		compatible = "dlg,da7219";
+		reg = <0x1a>;
+		interrupt-parent = <&pio>;
+		interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>;
+
+		dlg,micbias-lvl = <2600>;
+		dlg,mic-amp-in-sel = "diff";
+		VDD-supply = <&pp1800_alw>;
+		VDDMIC-supply = <&pp3300_alw>;
+		VDDIO-supply = <&pp1800_alw>;
+
+		status = "okay";
+
+		da7219_aad {
+			dlg,adc-1bit-rpt = <1>;
+			dlg,btn-avg = <4>;
+			dlg,btn-cfg = <50>;
+			dlg,mic-det-thr = <500>;
+			dlg,jack-ins-deb = <20>;
+			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-rem-deb = <1>;
+
+			dlg,a-d-btn-thr = <0xa>;
+			dlg,d-b-btn-thr = <0x16>;
+			dlg,b-c-btn-thr = <0x21>;
+			dlg,c-mic-btn-thr = <0x3E>;
+		};
+	};
+};
+
+&pio {
+	da7219_pins: da7219_pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&sound {
+	mediatek,headset-codec = <&da7219>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi
new file mode 100644
index 000000000..2b60967c0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for max98357a.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/ {
+	max98357a: max98357a {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&pio 175 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi
new file mode 100644
index 000000000..658a764fe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for rt1015p.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/ {
+	rt1015p: rt1015p {
+		compatible = "realtek,rt1015p";
+		sdb-gpios = <&pio 175 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi
new file mode 100644
index 000000000..260a5f561
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) ts3a227e-max98357a sound card.
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-max98357a.dtsi"
+#include "mt8183-kukui-audio-ts3a227e.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi
new file mode 100644
index 000000000..2f7d1fa1c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) mt6358-ts3a227-rt1015p sound card.
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "mt8183-kukui-audio-ts3a227e.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
new file mode 100644
index 000000000..0799c48ad
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Google Kukui (and derivatives) audio fragment for ts3a227e.
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+&i2c5 {
+	ts3a227e: ts3a227e@3b {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts3a227e_pins>;
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&pio>;
+		interrupts = <157 IRQ_TYPE_LEVEL_LOW>;
+		status = "okay";
+	};
+};
+
+&pio {
+	ts3a227e_pins: ts3a227e_pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&sound {
+	mediatek,headset-codec = <&ts3a227e>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
new file mode 100644
index 000000000..19c1e2bee
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google burnet board";
+	chassis-type = "convertible";
+	compatible = "google,burnet", "mediatek,mt8183";
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&i2c0 {
+	touchscreen@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <200>;
+		hid-descr-addr = <0x0020>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
new file mode 100644
index 000000000..072133fb0
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-cozmo.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google cozmo board";
+	compatible = "google,cozmo", "mediatek,mt8183";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_COZMO";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
new file mode 100644
index 000000000..552bfc726
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-da7219-max98357a.dtsi"
+
+/ {
+	model = "Google damu board";
+	chassis-type = "convertible";
+	compatible = "google,damu", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_DAMU";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
new file mode 100644
index 000000000..77b96ddf6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku1 board";
+	compatible = "google,fennel-sku1", "google,fennel", "mediatek,mt8183";
+
+	pwmleds {
+		compatible = "pwm-leds";
+		keyboard_backlight: led-0 {
+			label = "cros_ec::kbd_backlight";
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&cros_ec_pwm {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
new file mode 100644
index 000000000..37e6e58f6
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku6 board";
+	compatible = "google,fennel-sku6", "google,fennel", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
new file mode 100644
index 000000000..0e0960400
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel sku7 board";
+	compatible = "google,fennel-sku7", "google,fennel", "mediatek,mt8183";
+};
+
+&touchscreen {
+	status = "okay";
+
+	compatible = "hid-over-i2c";
+	reg = <0x10>;
+	interrupt-parent = <&pio>;
+	interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&touchscreen_pins>;
+
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+};
+
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
new file mode 100644
index 000000000..bbe6c338f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
new file mode 100644
index 000000000..3fc5a6181
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14-sku2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel14 sku2 board";
+	compatible = "google,fennel-sku2", "google,fennel", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
new file mode 100644
index 000000000..23ad0b91e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel14.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-fennel.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "Google fennel14 sku0 board";
+	compatible = "google,fennel-sku0", "google,fennel", "mediatek,mt8183";
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_FENNEL14";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
new file mode 100644
index 000000000..8ac6bf5b1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-juniper.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google juniper sku16 board";
+	chassis-type = "convertible";
+	compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi
new file mode 100644
index 000000000..078bc7656
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_JUNIPER";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
new file mode 100644
index 000000000..e5bd9191e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google kappa board";
+	compatible = "google,kappa", "mediatek,mt8183";
+};
+
+&mt6358codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
new file mode 100644
index 000000000..8fa89db03
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-juniper.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google kenzo sku17 board";
+	compatible = "google,juniper-sku17", "google,juniper", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
new file mode 100644
index 000000000..89208b843
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-willow.dtsi"
+#include "mt8183-kukui-audio-da7219-max98357a.dtsi"
+
+/ {
+	model = "Google willow board sku0";
+	compatible = "google,willow-sku0", "google,willow", "mediatek,mt8183";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
new file mode 100644
index 000000000..c7b20441d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi-willow.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	model = "Google willow board sku1";
+	compatible = "google,willow-sku1", "google,willow", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
new file mode 100644
index 000000000..76d335401
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-jacuzzi.dtsi"
+
+&i2c2 {
+	trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_JUNIPER";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
new file mode 100644
index 000000000..820260348
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+/* Must come after mt8183-kukui.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
+
+/ {
+	pp1200_mipibrdg: pp1200-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1200_mipibrdg_en>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_mipibrdg: pp1800-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp3300_panel: pp3300-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_panel_pins>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddio_mipibrdg: vddio-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddio_mipibrdg_en>;
+
+		enable-active-high;
+		regulator-boot-on;
+
+		gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+	};
+
+	volume_buttons: volume-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_button_pins>;
+
+		button-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <100>;
+
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <100>;
+
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&cros_ec {
+	cros_ec_pwm: pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+		status = "disabled";
+	};
+};
+
+&dsi0 {
+	status = "okay";
+	/delete-property/#size-cells;
+	/delete-property/#address-cells;
+	/delete-node/panel@0;
+	ports {
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&anx7625_in>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+
+		interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>;
+
+		wakeup-source;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		panel_flags = <1>;
+		enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1200_mipibrdg>;
+		vdd18-supply = <&pp1800_mipibrdg>;
+		vdd33-supply = <&vddio_mipibrdg>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+
+			anx7625_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			anx7625_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_panel>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c_tunnel {
+	google,remote-bus = <2>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	pp1200_mipibrdg_en: pp1200-mipibrdg-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	pp3300_panel_pins: pp3300-panel-pins {
+		panel_3v3_enable: panel-3v3-enable {
+			pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
+			output-low;
+		};
+	};
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	anx7625_pins: anx7625-pins {
+		pins1 {
+			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>,
+				 <PINMUX_GPIO73__FUNC_GPIO73>;
+			output-low;
+		};
+		pins2 {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	touchscreen_pins: touchscreen-pins {
+		touch-int-odl {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		touch-rst-l {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+			output-high;
+		};
+	};
+
+	trackpad_pins: trackpad-pins {
+		trackpad-int {
+			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
+			input-enable;
+			bias-disable; /* pulled externally */
+		};
+	};
+
+	vddio_mipibrdg_en: vddio-mipibrdg-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
+			output-low;
+		};
+	};
+
+	volume_button_pins: volume-button-pins {
+		voldn-btn-odl {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		volup-btn-odl {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
new file mode 100644
index 000000000..fcce8ea12
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-rt1015p.dtsi"
+
+/ {
+	model = "MediaTek kakadu board sku22";
+	chassis-type = "tablet";
+	compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22",
+		     "google,kakadu", "mediatek,mt8183";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p";
+};
+
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
new file mode 100644
index 000000000..ebfabba72
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kakadu.dtsi"
+#include "mt8183-kukui-audio-da7219-rt1015p.dtsi"
+
+/ {
+	model = "MediaTek kakadu board";
+	chassis-type = "tablet";
+	compatible = "google,kakadu-rev3", "google,kakadu-rev2",
+			"google,kakadu", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
new file mode 100644
index 000000000..a11adeb29
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject>;
+
+		switch-pen-insert {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcamio_reg>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcama2_reg>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcn18_reg>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcn18_reg>;
+	};
+};
+
+&mipi_tx0 {
+	drive-strength-microamp = <5800>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+
+	pen_eject: peneject {
+		pen_eject {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			/* External pull-up. */
+			bias-disable;
+		};
+	};
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KAKADU";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv105wum-nw0";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
new file mode 100644
index 000000000..7213cdcca
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ *
+ * SKU: 0x10 => 16
+ *  - bit 8: Camera: 0 (OV5695)
+ *  - bits 7..4: Panel ID: 0x1 (AUO)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku16 board";
+	chassis-type = "tablet";
+	compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
new file mode 100644
index 000000000..bbf0cd1aa
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ *
+ * SKU: 0x110 => 272
+ *  - bit 8: Camera: 1 (GC5035)
+ *  - bits 7..4: Panel ID: 0x1 (AUO)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku272 board";
+	chassis-type = "tablet";
+	compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
new file mode 100644
index 000000000..a429ffeac
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ *
+ * SKU: 0x120 => 288
+ *  - bit 8: Camera: 1 (GC5035)
+ *  - bits 7..4: Panel ID: 0x2 (BOE)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku288 board";
+	chassis-type = "tablet";
+	compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
new file mode 100644
index 000000000..773935800
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ *
+ * SKU: 0x20 => 32
+ *  - bit 8: Camera: 0 (OV5695)
+ *  - bits 7..4: Panel ID: 0x2 (BOE)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku32 board";
+	compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
new file mode 100644
index 000000000..4864c39e5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui.dtsi"
+#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&i2c2 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcamio_reg>;
+
+	eeprom@58 {
+		compatible = "atmel,24c64";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcamio_reg>;
+	};
+};
+
+&i2c4 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcn18_reg>;
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcn18_reg>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	touch_default: touchdefault {
+		pin_irq {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		touch_pin_reset: pin_reset {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The touchscreen driver doesn't currently support driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the controller was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the touchscreen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KODAMA";
+};
+
+&i2c_tunnel {
+        google,remote-bus = <2>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
new file mode 100644
index 000000000..4ac75806f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku0.
+ *
+ * SKU is a 8-bit value (0x00 == 0):
+ *  - Bits 7..4: Panel ID: 0x0 (AUO)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku0 board";
+	chassis-type = "tablet";
+	compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,kd101n80-45na";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
new file mode 100644
index 000000000..095279e55
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku176.
+ *
+ * SKU is a 8-bit value (0xb0 == 176):
+ *  - Bits 7..4: Panel ID: 0xb (BOE)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku176 board";
+	chassis-type = "tablet";
+	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
+};
+
+&panel {
+        status = "okay";
+        compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
new file mode 100644
index 000000000..d5f41c6c9
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+#include "mt8183-kukui-audio-max98357a.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen4: touchscreen@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcamio_reg>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcama2_reg>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	vbus-supply = <&mt6358_vcn18_reg>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+		vcc-supply = <&mt6358_vcn18_reg>;
+	};
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "LE_Krane";
+};
+
+&sound {
+	compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
new file mode 100644
index 000000000..6f333f5cb
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -0,0 +1,1014 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight_lcd0: backlight_lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&bl_pp5000>;
+		enable-gpios = <&pio 176 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+		status = "okay";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	it6505_pp18_reg: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "it6505_pp18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 178 0>;
+		enable-active-high;
+	};
+
+	lcd_pp3300: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_pp3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bl_pp5000: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_pp5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	mmc1_fixed_power: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc1_fixed_io: regulator4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp1800_alw: regulator5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp3300_alw: regulator6 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	sound: mt8183-sound {
+		mediatek,platform = <&afe>;
+		pinctrl-names = "default",
+				"aud_tdm_out_on",
+				"aud_tdm_out_off";
+		pinctrl-0 = <&aud_pins_default>;
+		pinctrl-1 = <&aud_pins_tdm_out_on>;
+		pinctrl-2 = <&aud_pins_tdm_out_off>;
+		status = "okay";
+	};
+
+	btsco: bt-sco {
+		compatible = "linux,bt-sco";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_pwrseq>;
+
+		/* Toggle WIFI_ENABLE to reset the chip. */
+		reset-gpios = <&pio 119 1>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_wakeup>;
+
+		button-wowlan {
+			label = "Wake on WiFi";
+			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1553
+						0 1488
+						5000 1412
+						10000 1326
+						15000 1232
+						20000 1132
+						25000 1029
+						30000 925
+						35000 823
+						40000 726
+						45000 635
+						50000 552
+						55000 478
+						60000 411
+						65000 353
+						70000 303
+						75000 260
+						80000 222
+						85000 190
+						90000 163
+						95000 140
+						100000 121
+						105000 104
+						110000 90
+						115000 78
+						120000 67
+						125000 59>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 1553
+						0 1488
+						5000 1412
+						10000 1326
+						15000 1232
+						20000 1132
+						25000 1029
+						30000 925
+						35000 823
+						40000 726
+						45000 635
+						50000 552
+						55000 478
+						60000 411
+						65000 353
+						70000 303
+						75000 260
+						80000 222
+						85000 190
+						90000 163
+						95000 140
+						100000 121
+						105000 104
+						110000 90
+						115000 78
+						120000 67
+						125000 59>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port {
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6358_vgpu_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	vmmc-supply = <&mmc1_fixed_power>;
+	vqmmc-supply = <&mmc1_fixed_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	wakeup-source;
+	cap-sdio-irq;
+	non-removable;
+	no-mmc;
+	no-sd;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	qca_wifi: qca-wifi@1 {
+		compatible = "qcom,ath10k";
+		reg = <1>;
+	};
+};
+
+&mt6358_vdram2_reg {
+	regulator-always-on;
+};
+
+&mt6358codec {
+	Avdd-supply = <&mt6358_vaud28_reg>;
+};
+
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsim1_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&mt6358_vsim2_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&pio {
+	aud_pins_default: audiopins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
+				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
+				<PINMUX_GPIO101__FUNC_I2S2_LRCK>,
+				<PINMUX_GPIO102__FUNC_I2S2_DI>,
+				<PINMUX_GPIO3__FUNC_I2S3_DO>, /*i2s to da7219/max98357*/
+				<PINMUX_GPIO89__FUNC_I2S5_BCK>,
+				<PINMUX_GPIO90__FUNC_I2S5_LRCK>,
+				<PINMUX_GPIO91__FUNC_I2S5_DO>,
+				<PINMUX_GPIO174__FUNC_I2S0_DI>, /*i2s to wifi/bt*/
+				<PINMUX_GPIO136__FUNC_AUD_CLK_MOSI>,
+				<PINMUX_GPIO137__FUNC_AUD_SYNC_MOSI>,
+				<PINMUX_GPIO138__FUNC_AUD_DAT_MOSI0>,
+				<PINMUX_GPIO139__FUNC_AUD_DAT_MOSI1>,
+				<PINMUX_GPIO140__FUNC_AUD_CLK_MISO>,
+				<PINMUX_GPIO141__FUNC_AUD_SYNC_MISO>,
+				<PINMUX_GPIO142__FUNC_AUD_DAT_MISO0>,
+				<PINMUX_GPIO143__FUNC_AUD_DAT_MISO1>; /*mtkaif3.0*/
+		};
+	};
+
+	aud_pins_tdm_out_on: audiotdmouton {
+		pins-bus {
+			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
+				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
+				<PINMUX_GPIO171__FUNC_TDM_DATA0_2ND>,
+				<PINMUX_GPIO172__FUNC_TDM_DATA1_2ND>,
+				<PINMUX_GPIO173__FUNC_TDM_DATA2_2ND>,
+				<PINMUX_GPIO10__FUNC_TDM_DATA3>; /*8ch-i2s to it6505*/
+			drive-strength = <MTK_DRIVE_6mA>;
+		};
+	};
+
+	aud_pins_tdm_out_off: audiotdmoutoff {
+		pins-bus {
+			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
+				<PINMUX_GPIO170__FUNC_GPIO170>,
+				<PINMUX_GPIO171__FUNC_GPIO171>,
+				<PINMUX_GPIO172__FUNC_GPIO172>,
+				<PINMUX_GPIO173__FUNC_GPIO173>,
+				<PINMUX_GPIO10__FUNC_GPIO10>;
+			input-enable;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_2mA>;
+		};
+	};
+
+	bt_pins: bt-pins {
+		pins-bt-en {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-low;
+		};
+	};
+
+	ec_ap_int_odl: ec-ap-int-odl {
+		pins1 {
+			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	h1_int_od_l: h1-int-od-l {
+		pins1 {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c5_pins: i2c5 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		pins-bus {
+			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
+				 <PINMUX_GPIO12__FUNC_SDA6>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-pins-default {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			mediatek,pull-down-adv = <10>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-pins-uhs {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <10>;
+			input-enable;
+		};
+	};
+
+	panel_pins_default: panel-pins-default {
+		panel-reset {
+			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+			output-low;
+			bias-pull-up;
+		};
+	};
+
+	pwm0_pin_default: pwm0-pin-default {
+		pins1 {
+			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
+			output-high;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <PINMUX_GPIO43__FUNC_DISP_PWM>;
+		};
+	};
+
+	scp_pins: scp {
+		pins-scp-uart {
+			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
+				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
+		};
+	};
+
+	spi0_pins: spi0 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
+				 <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
+				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
+			bias-disable;
+		};
+		pins-spi-mi {
+			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
+			mediatek,pull-down-adv = <00>;
+		};
+	};
+
+	spi3_pins: spi3 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
+				 <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi4_pins: spi4 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
+				 <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi5_pins: spi5 {
+		pins-spi {
+			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
+				 <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins_default: uart0-pins-default {
+		pins-rx {
+			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_default: uart1-pins-default {
+		pins-rx {
+			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins-rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins-cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart1_pins_sleep: uart1-pins-sleep {
+		pins-rx {
+			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins-tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins-rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins-cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	wifi_pins_pwrseq: wifi-pins-pwrseq {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
+			output-low;
+		};
+	};
+
+	wifi_pins_wakeup: wifi-pins-wakeup {
+		pins-wifi-wakeup {
+			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
+			input-enable;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin_default>;
+};
+
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8183/scp.img";
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros_ec {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&mfg_async {
+	domain-supply = <&mt6358_vsram_gpu_reg>;
+};
+
+&mfg {
+	domain-supply = <&mt6358_vgpu_reg>;
+};
+
+&soc_data {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		interrupt-parent = <&pio>;
+		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	w25q64dw: flash@0 {
+		compatible = "winbond,w25q64dw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_odl>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+
+		cbas {
+			compatible = "google,cros-cbas";
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "sink";
+			};
+		};
+	};
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+};
+
+&thermal_zones {
+	tboard1 {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor1>;
+	};
+
+	tboard2 {
+		polling-delay = <1000>; /* milliseconds */
+		polling-delay-passive = <0>; /* milliseconds */
+		thermal-sensors = <&tboard_thermistor2>;
+	};
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins_default>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	status = "okay";
+	/delete-property/ interrupts;
+	interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>,
+			      <&pio 121 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth: bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		status = "okay";
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&pio 120 0>;
+		clocks = <&clk32k>;
+		firmware-name = "nvm_00440302_i2s.bin";
+	};
+};
+
+&usb_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+	};
+};
+
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
new file mode 100644
index 000000000..b5784a60c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	model = "Pumpkin MT8183";
+	compatible = "mediatek,mt8183-pumpkin", "mediatek,mt8183";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: scp_mem_region@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red {
+			label = "red";
+			gpios = <&pio 155 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pio 156 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	thermistor {
+		compatible = "murata,ncp03wf104";
+		pullup-uv = <1800000>;
+		pullup-ohm = <390000>;
+		pulldown-ohm = <0>;
+		io-channels = <&auxadc 0>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&mt6358_vgpu_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_1>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_3>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_4>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_pins_5>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&keyboard {
+	pinctrl-names = "default";
+	pinctrl-0 = <&keyboard_pins>;
+	status = "okay";
+	linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x01, 0x00, KEY_VOLUMEUP)>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <1>;
+	debounce-delay-ms = <32>;
+	mediatek,keys-per-group = <2>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	cap-sdio-irq;
+	no-mmc;
+	no-sd;
+	vmmc-supply = <&mt6358_vmch_reg>;
+	vqmmc-supply = <&mt6358_vmc_reg>;
+	keep-power-in-suspend;
+	wakeup-source;
+	non-removable;
+};
+
+&mt6358_vgpu_reg {
+	regulator-min-microvolt = <625000>;
+	regulator-max-microvolt = <900000>;
+
+	regulator-coupled-with = <&mt6358_vsram_gpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&mt6358_vsram_gpu_reg {
+	regulator-min-microvolt = <850000>;
+	regulator-max-microvolt = <1000000>;
+
+	regulator-coupled-with = <&mt6358_vgpu_reg>;
+	regulator-coupled-max-spread = <100000>;
+};
+
+&pio {
+	i2c_pins_0: i2c0 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_1: i2c1 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_2: i2c2 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_3: i2c3 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_4: i2c4 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c_pins_5: i2c5 {
+		pins_i2c {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO113__FUNC_SCL6>,
+				 <PINMUX_GPIO114__FUNC_SDA6>;
+			mediatek,pull-up-adv = <3>;
+		};
+	};
+
+	keyboard_pins: keyboard {
+		pins_keyboard {
+			pinmux = <PINMUX_GPIO91__FUNC_KPROW1>,
+				 <PINMUX_GPIO92__FUNC_KPROW0>,
+				 <PINMUX_GPIO93__FUNC_KPCOL0>;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_pmu {
+			pinmux = <PINMUX_GPIO178__FUNC_GPIO178>;
+			output-high;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <10>;
+			input-enable;
+		};
+	};
+};
+
+&mfg {
+	domain-supply = <&mt6358_vgpu_reg>;
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&scp {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
new file mode 100644
index 000000000..df6e9990c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -0,0 +1,2110 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/gce/mt8183-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8183-larb-port.h>
+#include <dt-bindings/power/mt8183-power.h>
+#include <dt-bindings/reset/mt8183-resets.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+/ {
+	compatible = "mediatek,mt8183";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		ovl-2l1 = &ovl_2l1;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp0-793000000 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <650000>;
+			required-opps = <&opp2_00>;
+		};
+		opp0-910000000 {
+			opp-hz = /bits/ 64 <910000000>;
+			opp-microvolt = <687500>;
+			required-opps = <&opp2_01>;
+		};
+		opp0-1014000000 {
+			opp-hz = /bits/ 64 <1014000000>;
+			opp-microvolt = <718750>;
+			required-opps = <&opp2_02>;
+		};
+		opp0-1131000000 {
+			opp-hz = /bits/ 64 <1131000000>;
+			opp-microvolt = <756250>;
+			required-opps = <&opp2_03>;
+		};
+		opp0-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&opp2_04>;
+		};
+		opp0-1326000000 {
+			opp-hz = /bits/ 64 <1326000000>;
+			opp-microvolt = <818750>;
+			required-opps = <&opp2_05>;
+		};
+		opp0-1417000000 {
+			opp-hz = /bits/ 64 <1417000000>;
+			opp-microvolt = <850000>;
+			required-opps = <&opp2_06>;
+		};
+		opp0-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <868750>;
+			required-opps = <&opp2_07>;
+		};
+		opp0-1586000000 {
+			opp-hz = /bits/ 64 <1586000000>;
+			opp-microvolt = <893750>;
+			required-opps = <&opp2_08>;
+		};
+		opp0-1625000000 {
+			opp-hz = /bits/ 64 <1625000000>;
+			opp-microvolt = <906250>;
+			required-opps = <&opp2_09>;
+		};
+		opp0-1677000000 {
+			opp-hz = /bits/ 64 <1677000000>;
+			opp-microvolt = <931250>;
+			required-opps = <&opp2_10>;
+		};
+		opp0-1716000000 {
+			opp-hz = /bits/ 64 <1716000000>;
+			opp-microvolt = <943750>;
+			required-opps = <&opp2_11>;
+		};
+		opp0-1781000000 {
+			opp-hz = /bits/ 64 <1781000000>;
+			opp-microvolt = <975000>;
+			required-opps = <&opp2_12>;
+		};
+		opp0-1846000000 {
+			opp-hz = /bits/ 64 <1846000000>;
+			opp-microvolt = <1000000>;
+			required-opps = <&opp2_13>;
+		};
+		opp0-1924000000 {
+			opp-hz = /bits/ 64 <1924000000>;
+			opp-microvolt = <1025000>;
+			required-opps = <&opp2_14>;
+		};
+		opp0-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1050000>;
+			required-opps = <&opp2_15>;
+		};	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp1-793000000 {
+			opp-hz = /bits/ 64 <793000000>;
+			opp-microvolt = <700000>;
+			required-opps = <&opp2_00>;
+		};
+		opp1-910000000 {
+			opp-hz = /bits/ 64 <910000000>;
+			opp-microvolt = <725000>;
+			required-opps = <&opp2_01>;
+		};
+		opp1-1014000000 {
+			opp-hz = /bits/ 64 <1014000000>;
+			opp-microvolt = <750000>;
+			required-opps = <&opp2_02>;
+		};
+		opp1-1131000000 {
+			opp-hz = /bits/ 64 <1131000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&opp2_03>;
+		};
+		opp1-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&opp2_04>;
+		};
+		opp1-1326000000 {
+			opp-hz = /bits/ 64 <1326000000>;
+			opp-microvolt = <825000>;
+			required-opps = <&opp2_05>;
+		};
+		opp1-1417000000 {
+			opp-hz = /bits/ 64 <1417000000>;
+			opp-microvolt = <850000>;
+			required-opps = <&opp2_06>;
+		};
+		opp1-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&opp2_07>;
+		};
+		opp1-1586000000 {
+			opp-hz = /bits/ 64 <1586000000>;
+			opp-microvolt = <900000>;
+			required-opps = <&opp2_08>;
+		};
+		opp1-1625000000 {
+			opp-hz = /bits/ 64 <1625000000>;
+			opp-microvolt = <912500>;
+			required-opps = <&opp2_09>;
+		};
+		opp1-1677000000 {
+			opp-hz = /bits/ 64 <1677000000>;
+			opp-microvolt = <931250>;
+			required-opps = <&opp2_10>;
+		};
+		opp1-1716000000 {
+			opp-hz = /bits/ 64 <1716000000>;
+			opp-microvolt = <950000>;
+			required-opps = <&opp2_11>;
+		};
+		opp1-1781000000 {
+			opp-hz = /bits/ 64 <1781000000>;
+			opp-microvolt = <975000>;
+			required-opps = <&opp2_12>;
+		};
+		opp1-1846000000 {
+			opp-hz = /bits/ 64 <1846000000>;
+			opp-microvolt = <1000000>;
+			required-opps = <&opp2_13>;
+		};
+		opp1-1924000000 {
+			opp-hz = /bits/ 64 <1924000000>;
+			opp-microvolt = <1025000>;
+			required-opps = <&opp2_14>;
+		};
+		opp1-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1050000>;
+			required-opps = <&opp2_15>;
+		};
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp2_00: opp-273000000 {
+			opp-hz = /bits/ 64 <273000000>;
+			opp-microvolt = <650000>;
+		};
+		opp2_01: opp-338000000 {
+			opp-hz = /bits/ 64 <338000000>;
+			opp-microvolt = <687500>;
+		};
+		opp2_02: opp-403000000 {
+			opp-hz = /bits/ 64 <403000000>;
+			opp-microvolt = <718750>;
+		};
+		opp2_03: opp-463000000 {
+			opp-hz = /bits/ 64 <463000000>;
+			opp-microvolt = <756250>;
+		};
+		opp2_04: opp-546000000 {
+			opp-hz = /bits/ 64 <546000000>;
+			opp-microvolt = <800000>;
+		};
+		opp2_05: opp-624000000 {
+			opp-hz = /bits/ 64 <624000000>;
+			opp-microvolt = <818750>;
+		};
+		opp2_06: opp-689000000 {
+			opp-hz = /bits/ 64 <689000000>;
+			opp-microvolt = <850000>;
+		};
+		opp2_07: opp-767000000 {
+			opp-hz = /bits/ 64 <767000000>;
+			opp-microvolt = <868750>;
+		};
+		opp2_08: opp-845000000 {
+			opp-hz = /bits/ 64 <845000000>;
+			opp-microvolt = <893750>;
+		};
+		opp2_09: opp-871000000 {
+			opp-hz = /bits/ 64 <871000000>;
+			opp-microvolt = <906250>;
+		};
+		opp2_10: opp-923000000 {
+			opp-hz = /bits/ 64 <923000000>;
+			opp-microvolt = <931250>;
+		};
+		opp2_11: opp-962000000 {
+			opp-hz = /bits/ 64 <962000000>;
+			opp-microvolt = <943750>;
+		};
+		opp2_12: opp-1027000000 {
+			opp-hz = /bits/ 64 <1027000000>;
+			opp-microvolt = <975000>;
+		};
+		opp2_13: opp-1092000000 {
+			opp-hz = /bits/ 64 <1092000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp2_14: opp-1144000000 {
+			opp-hz = /bits/ 64 <1144000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp2_15: opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	cci: cci {
+		compatible = "mediatek,mt8183-cci";
+		clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+			 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP0>;
+			clocks = <&mcucfg CLK_MCU_MP0_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP1>;
+			clocks = <&mcucfg CLK_MCU_MP2_SEL>,
+				 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <211>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <200>;
+				exit-latency-us = <200>;
+				min-residency-us = <800>;
+			};
+
+			CLUSTER_SLEEP0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1000>;
+			};
+			CLUSTER_SLEEP1: cluster-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <250>;
+				exit-latency-us = <400>;
+				min-residency-us = <1300>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	gpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <625000>;
+		};
+
+		opp-320000000 {
+			opp-hz = /bits/ 64 <320000000>;
+			opp-microvolt = <631250>;
+		};
+
+		opp-340000000 {
+			opp-hz = /bits/ 64 <340000000>;
+			opp-microvolt = <637500>;
+		};
+
+		opp-360000000 {
+			opp-hz = /bits/ 64 <360000000>;
+			opp-microvolt = <643750>;
+		};
+
+		opp-380000000 {
+			opp-hz = /bits/ 64 <380000000>;
+			opp-microvolt = <650000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <656250>;
+		};
+
+		opp-420000000 {
+			opp-hz = /bits/ 64 <420000000>;
+			opp-microvolt = <662500>;
+		};
+
+		opp-460000000 {
+			opp-hz = /bits/ 64 <460000000>;
+			opp-microvolt = <675000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <687500>;
+		};
+
+		opp-540000000 {
+			opp-hz = /bits/ 64 <540000000>;
+			opp-microvolt = <700000>;
+		};
+
+		opp-580000000 {
+			opp-hz = /bits/ 64 <580000000>;
+			opp-microvolt = <712500>;
+		};
+
+		opp-620000000 {
+			opp-hz = /bits/ 64 <620000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-653000000 {
+			opp-hz = /bits/ 64 <653000000>;
+			opp-microvolt = <743750>;
+		};
+
+		opp-698000000 {
+			opp-hz = /bits/ 64 <698000000>;
+			opp-microvolt = <768750>;
+		};
+
+		opp-743000000 {
+			opp-hz = /bits/ 64 <743000000>;
+			opp-microvolt = <793750>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <825000>;
+		};
+	};
+
+	pmu-a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu-a73 {
+		compatible = "arm,cortex-a73-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		soc_data: efuse@8000000 {
+			compatible = "mediatek,mt8183-efuse",
+				     "mediatek,efuse";
+			reg = <0 0x08000000 0 0x0010>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c100000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		mcucfg: syscon@c530000 {
+			compatible = "mediatek,mt8183-mcucfg", "syscon";
+			reg = <0 0x0c530000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: interrupt-controller@c530a80 {
+			compatible = "mediatek,mt8183-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c530a80 0 0x50>;
+		};
+
+		cpu_debug0: cpu-debug@d410000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd410000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu0>;
+		};
+
+		cpu_debug1: cpu-debug@d510000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd510000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu1>;
+		};
+
+		cpu_debug2: cpu-debug@d610000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd610000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu2>;
+		};
+
+		cpu_debug3: cpu-debug@d710000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd710000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu3>;
+		};
+
+		cpu_debug4: cpu-debug@d810000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd810000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu4>;
+		};
+
+		cpu_debug5: cpu-debug@d910000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xd910000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu5>;
+		};
+
+		cpu_debug6: cpu-debug@da10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xda10000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu6>;
+		};
+
+		cpu_debug7: cpu-debug@db10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x0 0xdb10000 0x0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_DEBUGSYS>;
+			clock-names = "apb_pclk";
+			cpu = <&cpu7>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8183-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8183-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8183-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8183-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11e80000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11e90000 0 0x1000>,
+			      <0 0x11d30000 0 0x1000>,
+			      <0 0x11d20000 0 0x1000>,
+			      <0 0x11c50000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg1", "iocfg2",
+				    "iocfg3", "iocfg4", "iocfg5",
+				    "iocfg6", "iocfg7", "iocfg8",
+				    "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 192>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8183-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8183-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				power-domain@MT8183_POWER_DOMAIN_AUDIO {
+					reg = <MT8183_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+						 <&infracfg CLK_INFRA_AUDIO>,
+						 <&infracfg CLK_INFRA_AUDIO_26M_BCLK>;
+					clock-names = "audio", "audio1", "audio2";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8183_POWER_DOMAIN_CONN {
+					reg = <MT8183_POWER_DOMAIN_CONN>;
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg_async: power-domain@MT8183_POWER_DOMAIN_MFG_ASYNC {
+					reg = <MT8183_POWER_DOMAIN_MFG_ASYNC>;
+					clocks = <&topckgen CLK_TOP_MUX_MFG>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg: power-domain@MT8183_POWER_DOMAIN_MFG {
+						reg = <MT8183_POWER_DOMAIN_MFG>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8183_POWER_DOMAIN_MFG_CORE0 {
+							reg = <MT8183_POWER_DOMAIN_MFG_CORE0>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8183_POWER_DOMAIN_MFG_CORE1 {
+							reg = <MT8183_POWER_DOMAIN_MFG_CORE1>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8183_POWER_DOMAIN_MFG_2D {
+							reg = <MT8183_POWER_DOMAIN_MFG_2D>;
+							mediatek,infracfg = <&infracfg>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8183_POWER_DOMAIN_DISP {
+					reg = <MT8183_POWER_DOMAIN_DISP>;
+					clocks = <&topckgen CLK_TOP_MUX_MM>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_LARB0>,
+						 <&mmsys CLK_MM_SMI_LARB1>,
+						 <&mmsys CLK_MM_GALS_COMM0>,
+						 <&mmsys CLK_MM_GALS_COMM1>,
+						 <&mmsys CLK_MM_GALS_CCU2MM>,
+						 <&mmsys CLK_MM_GALS_IPU12MM>,
+						 <&mmsys CLK_MM_GALS_IMG2MM>,
+						 <&mmsys CLK_MM_GALS_CAM2MM>,
+						 <&mmsys CLK_MM_GALS_IPU2MM>;
+					clock-names = "mm", "mm-0", "mm-1", "mm-2", "mm-3",
+						      "mm-4", "mm-5", "mm-6", "mm-7",
+						      "mm-8", "mm-9";
+					mediatek,infracfg = <&infracfg>;
+					mediatek,smi = <&smi_common>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8183_POWER_DOMAIN_CAM {
+						reg = <MT8183_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_MUX_CAM>,
+							 <&camsys CLK_CAM_LARB6>,
+							 <&camsys CLK_CAM_LARB3>,
+							 <&camsys CLK_CAM_SENINF>,
+							 <&camsys CLK_CAM_CAMSV0>,
+							 <&camsys CLK_CAM_CAMSV1>,
+							 <&camsys CLK_CAM_CAMSV2>,
+							 <&camsys CLK_CAM_CCU>;
+						clock-names = "cam", "cam-0", "cam-1",
+							      "cam-2", "cam-3", "cam-4",
+							      "cam-5", "cam-6";
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_ISP {
+						reg = <MT8183_POWER_DOMAIN_ISP>;
+						clocks = <&topckgen CLK_TOP_MUX_IMG>,
+							 <&imgsys CLK_IMG_LARB5>,
+							 <&imgsys CLK_IMG_LARB2>;
+						clock-names = "isp", "isp-0", "isp-1";
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_VDEC {
+						reg = <MT8183_POWER_DOMAIN_VDEC>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_VENC {
+						reg = <MT8183_POWER_DOMAIN_VENC>;
+						mediatek,smi = <&smi_common>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8183_POWER_DOMAIN_VPU_TOP {
+						reg = <MT8183_POWER_DOMAIN_VPU_TOP>;
+						clocks = <&topckgen CLK_TOP_MUX_IPU_IF>,
+							 <&topckgen CLK_TOP_MUX_DSP>,
+							 <&ipu_conn CLK_IPU_CONN_IPU>,
+							 <&ipu_conn CLK_IPU_CONN_AHB>,
+							 <&ipu_conn CLK_IPU_CONN_AXI>,
+							 <&ipu_conn CLK_IPU_CONN_ISP>,
+							 <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
+							 <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
+						clock-names = "vpu", "vpu1", "vpu-0", "vpu-1",
+							      "vpu-2", "vpu-3", "vpu-4", "vpu-5";
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8183_POWER_DOMAIN_VPU_CORE0 {
+							reg = <MT8183_POWER_DOMAIN_VPU_CORE0>;
+							clocks = <&topckgen CLK_TOP_MUX_DSP1>;
+							clock-names = "vpu2";
+							mediatek,infracfg = <&infracfg>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8183_POWER_DOMAIN_VPU_CORE1 {
+							reg = <MT8183_POWER_DOMAIN_VPU_CORE1>;
+							clocks = <&topckgen CLK_TOP_MUX_DSP2>;
+							clock-names = "vpu3";
+							mediatek,infracfg = <&infracfg>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8183-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8183-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8183-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_MUX_PMICSPI>,
+				 <&infracfg CLK_INFRA_PMIC_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		keyboard: keyboard@10010000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8183-scp";
+			reg = <0 0x10500000 0 0x80000>,
+			      <0 0x105c0000 0 0x19080>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_SCPSYS>;
+			clock-names = "main";
+			memory-region = <&scp_mem_reserved>;
+			status = "disabled";
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8183-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk13m>;
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8183-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>,
+					 <&larb4>, <&larb5>, <&larb6>;
+			#iommu-cells = <1>;
+		};
+
+		gce: mailbox@10238000 {
+			compatible = "mediatek,mt8183-gce";
+			reg = <0 0x10238000 0 0x4000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
+		auxadc: auxadc@11001000 {
+			compatible = "mediatek,mt8183-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8183-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c6: i2c@11005000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C6>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C0>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11008000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11008000 0 0x1000>,
+			      <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C1>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C1_ARBITER>;
+			clock-names = "main", "dma","arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11009000 0 0x1000>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C2>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C2_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		svs: svs@1100b000 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
+		thermal: thermal@1100b000 {
+			#thermal-sensor-cells = <1>;
+			compatible = "mediatek,mt8183-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_THERM>,
+				 <&infracfg CLK_INFRA_AUXADC>;
+			clock-names = "therm", "auxadc";
+			resets = <&infracfg  MT8183_INFRACFG_AO_THERM_SW_RST>;
+			interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
+					<&infracfg CLK_INFRA_DISP_PWM>;
+			clock-names = "main", "mm";
+		};
+
+		pwm1: pwm@11006000 {
+			compatible = "mediatek,mt8183-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_PWM>,
+				 <&infracfg CLK_INFRA_PWM_HCLK>,
+				 <&infracfg CLK_INFRA_PWM1>,
+				 <&infracfg CLK_INFRA_PWM2>,
+				 <&infracfg CLK_INFRA_PWM3>,
+				 <&infracfg CLK_INFRA_PWM4>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x1100f000 0 0x1000>,
+			      <0 0x11000400 0 0x80>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C3>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c1: i2c@11011000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11011000 0 0x1000>,
+			      <0 0x11000480 0 0x80>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C4>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c9: i2c@11014000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11014000 0 0x1000>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C1_IMM>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C1_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c10: i2c@11015000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11015000 0 0x1000>,
+			      <0 0x11000300 0 0x80>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C2_IMM>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C2_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@11016000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11016000 0 0x1000>,
+			      <0 0x11000500 0 0x80>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C5>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C5_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c11: i2c@11017000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x11017000 0 0x1000>,
+			      <0 0x11000580 0 0x80>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C5_IMM>,
+				 <&infracfg CLK_INFRA_AP_DMA>,
+				 <&infracfg CLK_INFRA_I2C5_ARBITER>;
+			clock-names = "main", "dma", "arb";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8183-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+				 <&topckgen CLK_TOP_MUX_SPI>,
+				 <&infracfg CLK_INFRA_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c7: i2c@1101a000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x1101a000 0 0x1000>,
+			      <0 0x11000680 0 0x80>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C7>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@1101b000 {
+			compatible = "mediatek,mt8183-i2c";
+			reg = <0 0x1101b000 0 0x1000>,
+			      <0 0x11000700 0 0x80>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_I2C8>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x420 101>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8183-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
+		audiosys: audio-controller@11220000 {
+			compatible = "mediatek,mt8183-audiosys", "syscon";
+			reg = <0 0x11220000 0 0x1000>;
+			#clock-cells = <1>;
+			afe: mt8183-afe-pcm {
+				compatible = "mediatek,mt8183-audio";
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+				resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>;
+				reset-names = "audiosys";
+				power-domains =
+					<&spm MT8183_POWER_DOMAIN_AUDIO>;
+				clocks = <&audiosys CLK_AUDIO_AFE>,
+					 <&audiosys CLK_AUDIO_DAC>,
+					 <&audiosys CLK_AUDIO_DAC_PREDIS>,
+					 <&audiosys CLK_AUDIO_ADC>,
+					 <&audiosys CLK_AUDIO_PDN_ADDA6_ADC>,
+					 <&audiosys CLK_AUDIO_22M>,
+					 <&audiosys CLK_AUDIO_24M>,
+					 <&audiosys CLK_AUDIO_APLL_TUNER>,
+					 <&audiosys CLK_AUDIO_APLL2_TUNER>,
+					 <&audiosys CLK_AUDIO_I2S1>,
+					 <&audiosys CLK_AUDIO_I2S2>,
+					 <&audiosys CLK_AUDIO_I2S3>,
+					 <&audiosys CLK_AUDIO_I2S4>,
+					 <&audiosys CLK_AUDIO_TDM>,
+					 <&audiosys CLK_AUDIO_TML>,
+					 <&infracfg CLK_INFRA_AUDIO>,
+					 <&infracfg CLK_INFRA_AUDIO_26M_BCLK>,
+					 <&topckgen CLK_TOP_MUX_AUDIO>,
+					 <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+					 <&topckgen CLK_TOP_SYSPLL_D2_D4>,
+					 <&topckgen CLK_TOP_MUX_AUD_1>,
+					 <&topckgen CLK_TOP_APLL1_CK>,
+					 <&topckgen CLK_TOP_MUX_AUD_2>,
+					 <&topckgen CLK_TOP_APLL2_CK>,
+					 <&topckgen CLK_TOP_MUX_AUD_ENG1>,
+					 <&topckgen CLK_TOP_APLL1_D8>,
+					 <&topckgen CLK_TOP_MUX_AUD_ENG2>,
+					 <&topckgen CLK_TOP_APLL2_D8>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S0>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S1>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S2>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S3>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S4>,
+					 <&topckgen CLK_TOP_MUX_APLL_I2S5>,
+					 <&topckgen CLK_TOP_APLL12_DIV0>,
+					 <&topckgen CLK_TOP_APLL12_DIV1>,
+					 <&topckgen CLK_TOP_APLL12_DIV2>,
+					 <&topckgen CLK_TOP_APLL12_DIV3>,
+					 <&topckgen CLK_TOP_APLL12_DIV4>,
+					 <&topckgen CLK_TOP_APLL12_DIVB>,
+					 /*<&topckgen CLK_TOP_APLL12_DIV5>,*/
+					 <&clk26m>;
+				clock-names = "aud_afe_clk",
+						  "aud_dac_clk",
+						  "aud_dac_predis_clk",
+						  "aud_adc_clk",
+						  "aud_adc_adda6_clk",
+						  "aud_apll22m_clk",
+						  "aud_apll24m_clk",
+						  "aud_apll1_tuner_clk",
+						  "aud_apll2_tuner_clk",
+						  "aud_i2s1_bclk_sw",
+						  "aud_i2s2_bclk_sw",
+						  "aud_i2s3_bclk_sw",
+						  "aud_i2s4_bclk_sw",
+						  "aud_tdm_clk",
+						  "aud_tml_clk",
+						  "aud_infra_clk",
+						  "mtkaif_26m_clk",
+						  "top_mux_audio",
+						  "top_mux_aud_intbus",
+						  "top_syspll_d2_d4",
+						  "top_mux_aud_1",
+						  "top_apll1_ck",
+						  "top_mux_aud_2",
+						  "top_apll2_ck",
+						  "top_mux_aud_eng1",
+						  "top_apll1_d8",
+						  "top_mux_aud_eng2",
+						  "top_apll2_d8",
+						  "top_i2s0_m_sel",
+						  "top_i2s1_m_sel",
+						  "top_i2s2_m_sel",
+						  "top_i2s3_m_sel",
+						  "top_i2s4_m_sel",
+						  "top_i2s5_m_sel",
+						  "top_apll12_div0",
+						  "top_apll12_div1",
+						  "top_apll12_div2",
+						  "top_apll12_div3",
+						  "top_apll12_div4",
+						  "top_apll12_divb",
+						  /*"top_apll12_div5",*/
+						  "top_clk26m_clk";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>,
+				 <&infracfg CLK_INFRA_MSDC0>,
+				 <&infracfg CLK_INFRA_MSDC0_SCK>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11e10000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>,
+				 <&infracfg CLK_INFRA_MSDC1>,
+				 <&infracfg CLK_INFRA_MSDC1_SCK>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mipi_tx0: dsi-phy@11e50000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11e50000 0 0x1000>;
+			clocks = <&apmixedsys CLK_APMIXED_MIPID0_26M>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			nvmem-cells = <&mipi_tx_calibration>;
+			nvmem-cell-names = "calibration-data";
+		};
+
+		efuse: efuse@11f10000 {
+			compatible = "mediatek,mt8183-efuse",
+				     "mediatek,efuse";
+			reg = <0 0x11f10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
+
+			mipi_tx_calibration: calib@190 {
+				reg = <0x190 0xc>;
+			};
+
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
+		};
+
+		u3phy: t-phy@11f40000 {
+			compatible = "mediatek,mt8183-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11f40000 0x1000>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <15>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x0700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		mfgcfg: syscon@13000000 {
+			compatible = "mediatek,mt8183-mfgcfg", "syscon";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8183b-mali", "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+			interrupts =
+				<GIC_SPI 280 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 279 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 278 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+
+			power-domains =
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE0>,
+				<&spm MT8183_POWER_DOMAIN_MFG_CORE1>,
+				<&spm MT8183_POWER_DOMAIN_MFG_2D>;
+			power-domain-names = "core0", "core1", "core2";
+
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8183-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		dma-controller0@14001000 {
+			compatible = "mediatek,mt8183-mdp3-rdma";
+			reg = <0 0x14001000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_RDMA0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+				 <&mmsys CLK_MM_MDP_RSZ1>;
+			iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+			mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>,
+				 <&gce 21 CMDQ_THR_PRIO_LOWEST 0>;
+			#dma-cells = <1>;
+		};
+
+		mdp3-rsz0@14003000 {
+			compatible = "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ0_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+		};
+
+		mdp3-rsz1@14004000 {
+			compatible = "mediatek,mt8183-mdp3-rsz";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+					      <CMDQ_EVENT_MDP_RSZ1_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+		};
+
+		dma-controller@14005000 {
+			compatible = "mediatek,mt8183-mdp3-wrot";
+			reg = <0 0x14005000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+					      <CMDQ_EVENT_MDP_WROT0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_WROT0>;
+			iommus = <&iommu M4U_PORT_MDP_WROT0>;
+			#dma-cells = <1>;
+		};
+
+		mdp3-wdma@14006000 {
+			compatible = "mediatek,mt8183-mdp3-wdma";
+			reg = <0 0x14006000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>,
+					      <CMDQ_EVENT_MDP_WDMA0_EOF>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+			iommus = <&iommu M4U_PORT_MDP_WDMA0>;
+		};
+
+		ovl0: ovl@14008000 {
+			compatible = "mediatek,mt8183-disp-ovl";
+			reg = <0 0x14008000 0 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+		};
+
+		ovl_2l0: ovl@14009000 {
+			compatible = "mediatek,mt8183-disp-ovl-2l";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+		};
+
+		ovl_2l1: ovl@1400a000 {
+			compatible = "mediatek,mt8183-disp-ovl-2l";
+			reg = <0 0x1400a000 0 0x1000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
+			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		rdma0: rdma@1400b000 {
+			compatible = "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400b000 0 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		rdma1: rdma@1400c000 {
+			compatible = "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,rdma-fifo-size = <2048>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		color0: color@1400e000 {
+			compatible = "mediatek,mt8183-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		ccorr0: ccorr@1400f000 {
+			compatible = "mediatek,mt8183-disp-ccorr";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+		};
+
+		aal0: aal@14010000 {
+			compatible = "mediatek,mt8183-disp-aal";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+		};
+
+		gamma0: gamma@14011000 {
+			compatible = "mediatek,mt8183-disp-gamma";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+		};
+
+		dither0: dither@14012000 {
+			compatible = "mediatek,mt8183-disp-dither";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+		};
+
+		dsi0: dsi@14014000 {
+			compatible = "mediatek,mt8183-dsi";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DSI0_MM>,
+				 <&mmsys CLK_MM_DSI0_IF>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+		};
+
+		mutex: mutex@14016000 {
+			compatible = "mediatek,mt8183-disp-mutex";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
+					      <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+		};
+
+		larb0: larb@14017000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x14017000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+			clock-names = "apb", "smi";
+		};
+
+		smi_common: smi@14019000 {
+			compatible = "mediatek,mt8183-smi-common";
+			reg = <0 0x14019000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_GALS_COMM0>,
+				 <&mmsys CLK_MM_GALS_COMM1>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+		};
+
+		mdp3-ccorr@1401c000 {
+			compatible = "mediatek,mt8183-mdp3-ccorr";
+			reg = <0 0x1401c000 0 0x1000>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>,
+					      <CMDQ_EVENT_MDP_CCORR_EOF>;
+			clocks = <&mmsys CLK_MM_MDP_CCORR>;
+		};
+
+		imgsys: syscon@15020000 {
+			compatible = "mediatek,mt8183-imgsys", "syscon";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb5: larb@15021000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x15021000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB5>, <&imgsys CLK_IMG_LARB5>,
+				 <&mmsys CLK_MM_GALS_IMG2MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_ISP>;
+		};
+
+		larb2: larb@1502f000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x1502f000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB2>, <&imgsys CLK_IMG_LARB2>,
+				 <&mmsys CLK_MM_GALS_IPU2MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_ISP>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8183-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_VDEC>, <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>;
+		};
+
+		vencsys: syscon@17000000 {
+			compatible = "mediatek,mt8183-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb4: larb@17010000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC_LARB>,
+				 <&vencsys CLK_VENC_LARB>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+		};
+
+		venc_jpg: venc_jpg@17030000 {
+			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x17030000 0 0x1000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
+			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
+				 <&iommu M4U_PORT_JPGENC_BSDMA>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_JPGENC>;
+			clock-names = "jpgenc";
+		};
+
+		ipu_conn: syscon@19000000 {
+			compatible = "mediatek,mt8183-ipu_conn", "syscon";
+			reg = <0 0x19000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipu_adl: syscon@19010000 {
+			compatible = "mediatek,mt8183-ipu_adl", "syscon";
+			reg = <0 0x19010000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipu_core0: syscon@19180000 {
+			compatible = "mediatek,mt8183-ipu_core0", "syscon";
+			reg = <0 0x19180000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipu_core1: syscon@19280000 {
+			compatible = "mediatek,mt8183-ipu_core1", "syscon";
+			reg = <0 0x19280000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys: syscon@1a000000 {
+			compatible = "mediatek,mt8183-camsys", "syscon";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb6: larb@1a001000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_LARB6>, <&camsys CLK_CAM_LARB6>,
+				 <&mmsys CLK_MM_GALS_CAM2MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
+		};
+
+		larb3: larb@1a002000 {
+			compatible = "mediatek,mt8183-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_LARB3>, <&camsys CLK_CAM_LARB3>,
+				 <&mmsys CLK_MM_GALS_IPU12MM>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8183_POWER_DOMAIN_CAM>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <500>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <5000>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <68000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu1
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu2
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu3
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <3072>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&cpu4
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu5
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu6
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+							 <&cpu7
+						THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+					contribution = <1024>;
+				};
+			};
+		};
+
+		/* The tzts1 ~ tzts6 don't need to polling */
+		/* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+		tzts1: tzts1 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts5: tzts5 {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 5>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tztsABB: tztsABB {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 6>;
+			sustainable-power = <5000>;
+			trips {};
+			cooling-maps {};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
new file mode 100644
index 000000000..2667a7424
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+
+/ {
+	model = "MediaTek MT8186 evaluation board";
+	chassis-type = "embedded";
+	compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <8000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <10000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+};
+
+&i2c8 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c8_pins>;
+};
+
+&i2c9 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c9_pins>;
+};
+
+&pio {
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
+				 <PINMUX_GPIO127__FUNC_SCL0>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
+				 <PINMUX_GPIO129__FUNC_SCL1>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
+				 <PINMUX_GPIO131__FUNC_SCL2>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
+				 <PINMUX_GPIO133__FUNC_SCL3>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c4_pins: i2c4-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+				 <PINMUX_GPIO135__FUNC_SCL4>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
+				 <PINMUX_GPIO137__FUNC_SCL5>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO140__FUNC_SDA6>,
+				 <PINMUX_GPIO139__FUNC_SCL6>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO142__FUNC_SDA7>,
+				 <PINMUX_GPIO141__FUNC_SCL7>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c8_pins: i2c8-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO144__FUNC_SDA8>,
+				 <PINMUX_GPIO143__FUNC_SCL8>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+
+	i2c9_pins: i2c9-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO146__FUNC_SDA9>,
+				 <PINMUX_GPIO145__FUNC_SCL9>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+			drive-strength-microamp = <1000>;
+			input-enable;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
new file mode 100644
index 000000000..2fec6fd1c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -0,0 +1,2098 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ * Author: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
+ */
+/dts-v1/;
+#include <dt-bindings/clock/mt8186-clk.h>
+#include <dt-bindings/gce/mt8186-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8186-memory-port.h>
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/power/mt8186-power.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt8186-resets.h>
+
+/ {
+	compatible = "mediatek,mt8186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+	};
+
+	cci: cci {
+		compatible = "mediatek,mt8186-cci";
+		clocks = <&mcusys CLK_MCU_ARMPLL_BUS_SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cci", "intermediate";
+		operating-points-v2 = <&cci_opp>;
+	};
+
+	cci_opp: opp-table-cci {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cci_opp_0: opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <600000>;
+		};
+
+		cci_opp_1: opp-560000000 {
+			opp-hz = /bits/ 64 <560000000>;
+			opp-microvolt = <675000>;
+		};
+
+		cci_opp_2: opp-612000000 {
+			opp-hz = /bits/ 64 <612000000>;
+			opp-microvolt = <693750>;
+		};
+
+		cci_opp_3: opp-682000000 {
+			opp-hz = /bits/ 64 <682000000>;
+			opp-microvolt = <718750>;
+		};
+
+		cci_opp_4: opp-752000000 {
+			opp-hz = /bits/ 64 <752000000>;
+			opp-microvolt = <743750>;
+		};
+
+		cci_opp_5: opp-822000000 {
+			opp-hz = /bits/ 64 <822000000>;
+			opp-microvolt = <768750>;
+		};
+
+		cci_opp_6: opp-875000000 {
+			opp-hz = /bits/ 64 <875000000>;
+			opp-microvolt = <781250>;
+		};
+
+		cci_opp_7: opp-927000000 {
+			opp-hz = /bits/ 64 <927000000>;
+			opp-microvolt = <800000>;
+		};
+
+		cci_opp_8: opp-980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			opp-microvolt = <818750>;
+		};
+
+		cci_opp_9: opp-1050000000 {
+			opp-hz = /bits/ 64 <1050000000>;
+			opp-microvolt = <843750>;
+		};
+
+		cci_opp_10: opp-1120000000 {
+			opp-hz = /bits/ 64 <1120000000>;
+			opp-microvolt = <862500>;
+		};
+
+		cci_opp_11: opp-1155000000 {
+			opp-hz = /bits/ 64 <1155000000>;
+			opp-microvolt = <887500>;
+		};
+
+		cci_opp_12: opp-1190000000 {
+			opp-hz = /bits/ 64 <1190000000>;
+			opp-microvolt = <906250>;
+		};
+
+		cci_opp_13: opp-1260000000 {
+			opp-hz = /bits/ 64 <1260000000>;
+			opp-microvolt = <950000>;
+		};
+
+		cci_opp_14: opp-1330000000 {
+			opp-hz = /bits/ 64 <1330000000>;
+			opp-microvolt = <993750>;
+		};
+
+		cci_opp_15: opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1031250>;
+		};
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <600000>;
+			required-opps = <&cci_opp_0>;
+		};
+
+		opp-774000000 {
+			opp-hz = /bits/ 64 <774000000>;
+			opp-microvolt = <675000>;
+			required-opps = <&cci_opp_1>;
+		};
+
+		opp-875000000 {
+			opp-hz = /bits/ 64 <875000000>;
+			opp-microvolt = <700000>;
+			required-opps = <&cci_opp_2>;
+		};
+
+		opp-975000000 {
+			opp-hz = /bits/ 64 <975000000>;
+			opp-microvolt = <725000>;
+			required-opps = <&cci_opp_3>;
+		};
+
+		opp-1075000000 {
+			opp-hz = /bits/ 64 <1075000000>;
+			opp-microvolt = <750000>;
+			required-opps = <&cci_opp_4>;
+		};
+
+		opp-1175000000 {
+			opp-hz = /bits/ 64 <1175000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&cci_opp_5>;
+		};
+
+		opp-1275000000 {
+			opp-hz = /bits/ 64 <1275000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&cci_opp_6>;
+		};
+
+		opp-1375000000 {
+			opp-hz = /bits/ 64 <1375000000>;
+			opp-microvolt = <825000>;
+			required-opps = <&cci_opp_7>;
+		};
+
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <856250>;
+			required-opps = <&cci_opp_8>;
+		};
+
+		opp-1618000000 {
+			opp-hz = /bits/ 64 <1618000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&cci_opp_9>;
+		};
+
+		opp-1666000000 {
+			opp-hz = /bits/ 64 <1666000000>;
+			opp-microvolt = <900000>;
+			required-opps = <&cci_opp_10>;
+		};
+
+		opp-1733000000 {
+			opp-hz = /bits/ 64 <1733000000>;
+			opp-microvolt = <925000>;
+			required-opps = <&cci_opp_11>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <950000>;
+			required-opps = <&cci_opp_12>;
+		};
+
+		opp-1866000000 {
+			opp-hz = /bits/ 64 <1866000000>;
+			opp-microvolt = <981250>;
+			required-opps = <&cci_opp_13>;
+		};
+
+		opp-1933000000 {
+			opp-hz = /bits/ 64 <1933000000>;
+			opp-microvolt = <1006250>;
+			required-opps = <&cci_opp_14>;
+		};
+
+		opp-2000000000 {
+			opp-hz = /bits/ 64 <2000000000>;
+			opp-microvolt = <1031250>;
+			required-opps = <&cci_opp_15>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-774000000 {
+			opp-hz = /bits/ 64 <774000000>;
+			opp-microvolt = <675000>;
+			required-opps = <&cci_opp_0>;
+		};
+
+		opp-835000000 {
+			opp-hz = /bits/ 64 <835000000>;
+			opp-microvolt = <693750>;
+			required-opps = <&cci_opp_1>;
+		};
+
+		opp-919000000 {
+			opp-hz = /bits/ 64 <919000000>;
+			opp-microvolt = <718750>;
+			required-opps = <&cci_opp_2>;
+		};
+
+		opp-1002000000 {
+			opp-hz = /bits/ 64 <1002000000>;
+			opp-microvolt = <743750>;
+			required-opps = <&cci_opp_3>;
+		};
+
+		opp-1085000000 {
+			opp-hz = /bits/ 64 <1085000000>;
+			opp-microvolt = <775000>;
+			required-opps = <&cci_opp_4>;
+		};
+
+		opp-1169000000 {
+			opp-hz = /bits/ 64 <1169000000>;
+			opp-microvolt = <800000>;
+			required-opps = <&cci_opp_5>;
+		};
+
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <843750>;
+			required-opps = <&cci_opp_6>;
+		};
+
+		opp-1419000000 {
+			opp-hz = /bits/ 64 <1419000000>;
+			opp-microvolt = <875000>;
+			required-opps = <&cci_opp_7>;
+		};
+
+		opp-1530000000 {
+			opp-hz = /bits/ 64 <1530000000>;
+			opp-microvolt = <912500>;
+			required-opps = <&cci_opp_8>;
+		};
+
+		opp-1670000000 {
+			opp-hz = /bits/ 64 <1670000000>;
+			opp-microvolt = <956250>;
+			required-opps = <&cci_opp_9>;
+		};
+
+		opp-1733000000 {
+			opp-hz = /bits/ 64 <1733000000>;
+			opp-microvolt = <981250>;
+			required-opps = <&cci_opp_10>;
+		};
+
+		opp-1796000000 {
+			opp-hz = /bits/ 64 <1796000000>;
+			opp-microvolt = <1012500>;
+			required-opps = <&cci_opp_11>;
+		};
+
+		opp-1860000000 {
+			opp-hz = /bits/ 64 <1860000000>;
+			opp-microvolt = <1037500>;
+			required-opps = <&cci_opp_12>;
+		};
+
+		opp-1923000000 {
+			opp-hz = /bits/ 64 <1923000000>;
+			opp-microvolt = <1062500>;
+			required-opps = <&cci_opp_13>;
+		};
+
+		cluster1_opp_14: opp-1986000000 {
+			opp-hz = /bits/ 64 <1986000000>;
+			opp-microvolt = <1093750>;
+			required-opps = <&cci_opp_14>;
+		};
+
+		cluster1_opp_15: opp-2050000000 {
+			opp-hz = /bits/ 64 <2050000000>;
+			opp-microvolt = <1118750>;
+			required-opps = <&cci_opp_15>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2000000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_LL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			dynamic-power-coefficient = <84>;
+			capacity-dmips-mhz = <382>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2050000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <335>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2050000000>;
+			clocks = <&mcusys CLK_MCU_ARMPLL_BL_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster1_opp>;
+			dynamic-power-coefficient = <335>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+			mediatek,cci = <&cci>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <100>;
+				min-residency-us = <1600>;
+			};
+
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <100>;
+				min-residency-us = <1400>;
+			};
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010001>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <250>;
+				min-residency-us = <2100>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010001>;
+				local-timer-stop;
+				entry-latency-us = <100>;
+				exit-latency-us = <250>;
+				min-residency-us = <1900>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <1048576>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-unified;
+		};
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-299000000 {
+			opp-hz = /bits/ 64 <299000000>;
+			opp-microvolt = <612500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-332000000 {
+			opp-hz = /bits/ 64 <332000000>;
+			opp-microvolt = <625000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-366000000 {
+			opp-hz = /bits/ 64 <366000000>;
+			opp-microvolt = <637500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <643750>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-434000000 {
+			opp-hz = /bits/ 64 <434000000>;
+			opp-microvolt = <656250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-484000000 {
+			opp-hz = /bits/ 64 <484000000>;
+			opp-microvolt = <668750>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-535000000 {
+			opp-hz = /bits/ 64 <535000000>;
+			opp-microvolt = <687500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-586000000 {
+			opp-hz = /bits/ 64 <586000000>;
+			opp-microvolt = <700000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-637000000 {
+			opp-hz = /bits/ 64 <637000000>;
+			opp-microvolt = <712500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-690000000 {
+			opp-hz = /bits/ 64 <690000000>;
+			opp-microvolt = <737500>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-743000000 {
+			opp-hz = /bits/ 64 <743000000>;
+			opp-microvolt = <756250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-796000000 {
+			opp-hz = /bits/ 64 <796000000>;
+			opp-microvolt = <781250>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <800000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-900000000-3 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-900000000-4 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <837500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-900000000-5 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <825000>;
+			opp-supported-hw = <0x30>;
+		};
+
+		opp-950000000-3 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <900000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-950000000-4 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-950000000-5 {
+			opp-hz = /bits/ 64 <950000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x30>;
+		};
+
+		opp-1000000000-3 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <950000>;
+			opp-supported-hw = <0x8>;
+		};
+
+		opp-1000000000-4 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <912500>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-1000000000-5 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <875000>;
+			opp-supported-hw = <0x30>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu6 &cpu7>;
+				};
+			};
+		};
+
+		mcusys: syscon@c53a000 {
+			compatible = "mediatek,mt8186-mcusys", "syscon";
+			reg = <0 0xc53a000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8186-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8186-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8186-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8186-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x10002000 0 0x0200>,
+			      <0 0x10002200 0 0x0200>,
+			      <0 0x10002400 0 0x0200>,
+			      <0 0x10002600 0 0x0200>,
+			      <0 0x10002a00 0 0x0200>,
+			      <0 0x10002c00 0 0x0200>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_lt", "iocfg_lm", "iocfg_lb",
+				    "iocfg_bl", "iocfg_rb", "iocfg_rt", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 185>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8186-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8186-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8186_POWER_DOMAIN_MFG0 {
+					reg = <MT8186_POWER_DOMAIN_MFG0>;
+					clocks = <&topckgen CLK_TOP_MFG>;
+					clock-names = "mfg00";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8186_POWER_DOMAIN_MFG1 {
+						reg = <MT8186_POWER_DOMAIN_MFG1>;
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_MFG2 {
+							reg = <MT8186_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8186_POWER_DOMAIN_MFG3 {
+							reg = <MT8186_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_CSIRX_TOP {
+					reg = <MT8186_POWER_DOMAIN_CSIRX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF1>;
+					clock-names = "subsys-csirx-top0",
+						      "subsys-csirx-top1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_SSUSB {
+					reg = <MT8186_POWER_DOMAIN_SSUSB>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_SSUSB_P1 {
+					reg = <MT8186_POWER_DOMAIN_SSUSB_P1>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_ADSP_AO {
+					reg = <MT8186_POWER_DOMAIN_ADSP_AO>;
+					clocks = <&topckgen CLK_TOP_AUDIODSP>,
+						 <&topckgen CLK_TOP_ADSP_BUS>;
+					clock-names = "audioadsp",
+						      "subsys-adsp-bus";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8186_POWER_DOMAIN_ADSP_INFRA {
+						reg = <MT8186_POWER_DOMAIN_ADSP_INFRA>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_ADSP_TOP {
+							reg = <MT8186_POWER_DOMAIN_ADSP_TOP>;
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_CONN_ON {
+					reg = <MT8186_POWER_DOMAIN_CONN_ON>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8186_POWER_DOMAIN_DIS {
+					reg = <MT8186_POWER_DOMAIN_DIS>;
+					clocks = <&topckgen CLK_TOP_DISP>,
+						 <&topckgen CLK_TOP_MDP>,
+						 <&mmsys CLK_MM_SMI_INFRA>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_GALS>,
+						 <&mmsys CLK_MM_SMI_IOMMU>;
+					clock-names = "disp", "mdp",
+						      "subsys-smi-infra",
+						      "subsys-smi-common",
+						      "subsys-smi-gals",
+						      "subsys-smi-iommu";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8186_POWER_DOMAIN_VDEC {
+						reg = <MT8186_POWER_DOMAIN_VDEC>;
+						clocks = <&topckgen CLK_TOP_VDEC>,
+							 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+						clock-names = "vdec0", "larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_CAM {
+						reg = <MT8186_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_SENINF>,
+							 <&topckgen CLK_TOP_SENINF1>,
+							 <&topckgen CLK_TOP_SENINF2>,
+							 <&topckgen CLK_TOP_SENINF3>,
+							 <&camsys CLK_CAM2MM_GALS>,
+							 <&topckgen CLK_TOP_CAMTM>,
+							 <&topckgen CLK_TOP_CAM>;
+						clock-names = "cam0", "cam1", "cam2",
+							      "cam3", "gals",
+							      "subsys-cam-tm",
+							      "subsys-cam-top";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_CAM_RAWB {
+							reg = <MT8186_POWER_DOMAIN_CAM_RAWB>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8186_POWER_DOMAIN_CAM_RAWA {
+							reg = <MT8186_POWER_DOMAIN_CAM_RAWA>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_IMG {
+						reg = <MT8186_POWER_DOMAIN_IMG>;
+						clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+							 <&topckgen CLK_TOP_IMG1>;
+						clock-names = "gals", "subsys-img-top";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8186_POWER_DOMAIN_IMG2 {
+							reg = <MT8186_POWER_DOMAIN_IMG2>;
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_IPE {
+						reg = <MT8186_POWER_DOMAIN_IPE>;
+						clocks = <&topckgen CLK_TOP_IPE>,
+							 <&ipesys CLK_IPE_LARB19>,
+							 <&ipesys CLK_IPE_LARB20>,
+							 <&ipesys CLK_IPE_SMI_SUBCOM>,
+							 <&ipesys CLK_IPE_GALS_IPE>;
+						clock-names = "subsys-ipe-top",
+							      "subsys-ipe-larb0",
+							      "subsys-ipe-larb1",
+							      "subsys-ipe-smi",
+							      "subsys-ipe-gals";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_VENC {
+						reg = <MT8186_POWER_DOMAIN_VENC>;
+						clocks = <&topckgen CLK_TOP_VENC>,
+							 <&vencsys CLK_VENC_CKE1_VENC>;
+						clock-names = "venc0", "larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8186_POWER_DOMAIN_WPE {
+						reg = <MT8186_POWER_DOMAIN_WPE>;
+						clocks = <&topckgen CLK_TOP_WPE>,
+							 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
+							 <&wpesys CLK_WPE_SMI_LARB8_PCLK_EN>;
+						clock-names = "wpe0",
+							      "subsys-larb-ck",
+							      "subsys-larb-pclk";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8186-wdt";
+			mediatek,disable-extrst;
+			reg = <0 0x10007000 0 0x1000>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8186-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8186-pwrap", "syscon";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+		};
+
+		spmi: spmi@10015000 {
+			compatible = "mediatek,mt8186-spmi", "mediatek,mt8195-spmi";
+			reg = <0 0x10015000 0 0x000e00>, <0 0x1001B000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_MST>;
+			clock-names = "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_SPMI_MST>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8186-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		gce: mailbox@1022c000 {
+			compatible = "mediatek,mt8186-gce";
+			reg = <0 0X1022c000 0 0x4000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+			clock-names = "gce";
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8186-scp";
+			reg = <0 0x10500000 0 0x40000>,
+			      <0 0x105c0000 0 0x19080>;
+			reg-names = "sram", "cfg";
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp: adsp@10680000 {
+			compatible = "mediatek,mt8186-dsp";
+			reg = <0 0x10680000 0 0x2000>, <0 0x10800000 0 0x100000>,
+			      <0 0x1068b000 0 0x100>, <0 0x1068f000 0 0x1000>;
+			reg-names = "cfg", "sram", "sec", "bus";
+			clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>;
+			clock-names = "audiodsp", "adsp_bus";
+			assigned-clocks = <&topckgen CLK_TOP_AUDIODSP>,
+					  <&topckgen CLK_TOP_ADSP_BUS>;
+			assigned-clock-parents = <&clk26m>, <&topckgen CLK_TOP_MAINPLL_D2_D2>;
+			mbox-names = "rx", "tx";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_ADSP_TOP>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10686100 {
+			compatible = "mediatek,mt8186-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10686100 0 0x1000>;
+			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_mailbox1: mailbox@10687100 {
+			compatible = "mediatek,mt8186-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10687100 0 0x1000>;
+			interrupts = <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		nor_flash: spi@11000000 {
+			compatible = "mediatek,mt8186-nor";
+			reg = <0 0x11000000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&infracfg_ao CLK_INFRA_AO_SPINOR>,
+				 <&infracfg_ao CLK_INFRA_AO_FLASHIF_133M>,
+				 <&infracfg_ao CLK_INFRA_AO_FLASHIF_66M>;
+			clock-names = "spi", "sf", "axi", "axi_s";
+			assigned-clocks = <&topckgen CLK_TOP_SPINOR>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D3_D8>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		auxadc: adc@11001000 {
+			compatible = "mediatek,mt8186-auxadc", "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			#io-channel-cells = <1>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11007000 0 0x1000>,
+			      <0 0x10200100 0 0x100>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11008000 0 0x1000>,
+			      <0 0x10200200 0 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11009000 0 0x1000>,
+			      <0 0x10200300 0 0x180>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x1100f000 0 0x1000>,
+			      <0 0x10200480 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11011000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11011000 0 0x1000>,
+			      <0 0x10200580 0 0x180>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@11016000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11016000 0 0x1000>,
+			      <0 0x10200700 0 0x100>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@1100d000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x1100d000 0 0x1000>,
+			      <0 0x10200800 0 0x100>;
+			interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@11004000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11004000 0 0x1000>,
+			      <0 0x10200900 0 0x180>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C7>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11005000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11005000 0 0x1000>,
+			      <0 0x10200A80 0 0x180>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C8>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8186-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11014000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11014000 0 0x1000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11015000 {
+			compatible = "mediatek,mt8186-spi", "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11015000 0 0x1000>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		imp_iic_wrap: clock-controller@11017000 {
+			compatible = "mediatek,mt8186-imp_iic_wrap";
+			reg = <0 0x11017000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart2: serial@11018000 {
+			compatible = "mediatek,mt8186-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		i2c9: i2c@11019000 {
+			compatible = "mediatek,mt8186-i2c";
+			reg = <0 0x11019000 0 0x1000>,
+			      <0 0x10200c00 0 0x180>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap CLK_IMP_IIC_WRAP_AP_CLOCK_I2C9>,
+				 <&infracfg_ao CLK_INFRA_AO_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		afe: audio-controller@11210000 {
+			compatible = "mediatek,mt8186-sound";
+			reg = <0 0x11210000 0 0x2000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUDIO>,
+				 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_BCLK>,
+				 <&topckgen CLK_TOP_AUDIO>,
+				 <&topckgen CLK_TOP_AUD_INTBUS>,
+				 <&topckgen CLK_TOP_MAINPLL_D2_D4>,
+				 <&topckgen CLK_TOP_AUD_1>,
+				 <&apmixedsys CLK_APMIXED_APLL1>,
+				 <&topckgen CLK_TOP_AUD_2>,
+				 <&apmixedsys CLK_APMIXED_APLL2>,
+				 <&topckgen CLK_TOP_AUD_ENGEN1>,
+				 <&topckgen CLK_TOP_APLL1_D8>,
+				 <&topckgen CLK_TOP_AUD_ENGEN2>,
+				 <&topckgen CLK_TOP_APLL2_D8>,
+				 <&topckgen CLK_TOP_APLL_I2S0_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S1_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S2_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_I2S4_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL_TDMOUT_MCK_SEL>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV0>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV1>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV2>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV4>,
+				 <&topckgen CLK_TOP_APLL12_CK_DIV_TDMOUT_M>,
+				 <&topckgen CLK_TOP_AUDIO_H>,
+				 <&clk26m>;
+			clock-names = "aud_infra_clk",
+				      "mtkaif_26m_clk",
+				      "top_mux_audio",
+				      "top_mux_audio_int",
+				      "top_mainpll_d2_d4",
+				      "top_mux_aud_1",
+				      "top_apll1_ck",
+				      "top_mux_aud_2",
+				      "top_apll2_ck",
+				      "top_mux_aud_eng1",
+				      "top_apll1_d8",
+				      "top_mux_aud_eng2",
+				      "top_apll2_d8",
+				      "top_i2s0_m_sel",
+				      "top_i2s1_m_sel",
+				      "top_i2s2_m_sel",
+				      "top_i2s4_m_sel",
+				      "top_tdm_m_sel",
+				      "top_apll12_div0",
+				      "top_apll12_div1",
+				      "top_apll12_div2",
+				      "top_apll12_div4",
+				      "top_apll12_div_tdm",
+				      "top_mux_audio_h",
+				      "top_clk26m_clk";
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			mediatek,infracfg = <&infracfg_ao>;
+			mediatek,topckgen = <&topckgen>;
+			resets = <&watchdog MT8186_TOPRGU_AUDIO_SW_RST>;
+			reset-names = "audiosys";
+			status = "disabled";
+		};
+
+		ssusb0: usb@11201000 {
+			compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2dff>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			clocks = <&topckgen CLK_TOP_USB_TOP>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
+				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host0: usb@11200000 {
+				compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				clocks = <&topckgen CLK_TOP_USB_TOP>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
+					 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
+				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
+				wakeup-source;
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8186-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11cd0000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDCFDE>;
+			clock-names = "source", "hclk", "source_cg", "crypto";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_MSDC50_0>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8186-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		ssusb1: usb@11281000 {
+			compatible = "mediatek,mt8186-mtu3", "mediatek,mtu3";
+			reg = <0 0x11281000 0 0x2dff>, <0 0x11283e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
+				 <&clk26m>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB_P1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host1: usb@11280000 {
+				compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11280000 0 0x1000>;
+				reg-names = "mac";
+				clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
+					 <&clk26m>,
+					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
+				interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
+				mediatek,syscon-wakeup = <&pericfg 0x424 2>;
+				wakeup-source;
+				status = "disabled";
+			};
+		};
+
+		u3phy0: t-phy@11c80000 {
+			compatible = "mediatek,mt8186-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11c80000 0x1000>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy1: t-phy@11ca0000 {
+			compatible = "mediatek,mt8186-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11ca0000 0x1000>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <0x8>;
+			};
+		};
+
+		efuse: efuse@11cb0000 {
+			compatible = "mediatek,mt8186-efuse", "mediatek,efuse";
+			reg = <0 0x11cb0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speedbin: gpu-speedbin@59c {
+				reg = <0x59c 0x4>;
+				bits = <0 3>;
+			};
+		};
+
+		mipi_tx0: dsi-phy@11cc0000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11cc0000 0 0x1000>;
+			clocks = <&clk26m>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			status = "disabled";
+		};
+
+		mfgsys: clock-controller@13000000 {
+			compatible = "mediatek,mt8186-mfgsys";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		gpu: gpu@13040000 {
+			compatible = "mediatek,mt8186-mali",
+				     "arm,mali-bifrost";
+			reg = <0 0x13040000 0 0x4000>;
+
+			clocks = <&mfgsys CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			power-domains = <&spm MT8186_POWER_DOMAIN_MFG2>,
+					<&spm MT8186_POWER_DOMAIN_MFG3>;
+			power-domain-names = "core0", "core1";
+			#cooling-cells = <2>;
+			nvmem-cells = <&gpu_speedbin>;
+			nvmem-cell-names = "speed-bin";
+			operating-points-v2 = <&gpu_opp_table>;
+			dynamic-power-coefficient = <4687>;
+			status = "disabled";
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8186-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8186-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8186-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>, <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_GALS>, <&mmsys CLK_MM_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		larb0: smi@14003000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		larb1: smi@14004000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14004000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8186-disp-ovl", "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L0_OVL_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl_2l0: ovl@14006000 {
+			compatible = "mediatek,mt8186-disp-ovl-2l", "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_OVL_2L_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		color: color@14009000 {
+			compatible = "mediatek,mt8186-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dpi: dpi@1400a000 {
+			compatible = "mediatek,mt8186-dpi";
+			reg = <0 0x1400a000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_DPI>,
+				 <&mmsys CLK_MM_DISP_DPI>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			assigned-clocks = <&topckgen CLK_TOP_DPI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_TVDPLL_D2>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_LOW 0>;
+			status = "disabled";
+
+			port {
+				dpi_out: endpoint { };
+			};
+		};
+
+		ccorr: ccorr@1400b000 {
+			compatible = "mediatek,mt8186-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		aal: aal@1400c000 {
+			compatible = "mediatek,mt8186-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400c000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		gamma: gamma@1400d000 {
+			compatible = "mediatek,mt8186-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		postmask: postmask@1400e000 {
+			compatible = "mediatek,mt8186-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400e000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dither: dither@1400f000 {
+			compatible = "mediatek,mt8186-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dsi0: dsi@14013000 {
+			compatible = "mediatek,mt8186-dsi";
+			reg = <0 0x14013000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DSI_CK_DOMAIN>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			resets = <&mmsys MT8186_MMSYS_SW0_RST_B_DISP_DSI0>;
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
+		};
+
+		iommu_mm: iommu@14016000 {
+			compatible = "mediatek,mt8186-iommu-mm";
+			reg = <0 0x14016000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_IOMMU>;
+			clock-names = "bclk";
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,larbs = <&larb0 &larb1 &larb2 &larb4
+					  &larb7 &larb8 &larb9 &larb11
+					  &larb13 &larb14 &larb16 &larb17
+					  &larb19 &larb20>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			#iommu-cells = <1>;
+		};
+
+		rdma1: rdma@1401f000 {
+			compatible = "mediatek,mt8186-disp-rdma", "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1401f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		wpesys: clock-controller@14020000 {
+			compatible = "mediatek,mt8186-wpesys";
+			reg = <0 0x14020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb8: smi@14023000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x14023000 0 0x1000>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB8_CK_EN>,
+				 <&wpesys CLK_WPE_SMI_LARB8_CK_EN>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <8>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_WPE>;
+		};
+
+		imgsys1: clock-controller@15020000 {
+			compatible = "mediatek,mt8186-imgsys1";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: smi@1502e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1502e000 0 0x1000>;
+			clocks = <&imgsys1 CLK_IMG1_GALS_IMG1>,
+				 <&imgsys1 CLK_IMG1_LARB9_IMG1>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IMG>;
+		};
+
+		imgsys2: clock-controller@15820000 {
+			compatible = "mediatek,mt8186-imgsys2";
+			reg = <0 0x15820000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: smi@1582e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1582e000 0 0x1000>;
+			clocks = <&imgsys1 CLK_IMG1_LARB9_IMG1>,
+				 <&imgsys2 CLK_IMG2_LARB9_IMG2>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IMG2>;
+		};
+
+		larb4: smi@1602e000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1602e000 0 0x1000>;
+			clocks = <&vdecsys CLK_VDEC_LARB1_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB1_CKEN>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VDEC>;
+		};
+
+		vdecsys: clock-controller@1602f000 {
+			compatible = "mediatek,mt8186-vdecsys";
+			reg = <0 0x1602f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt8186-vencsys";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: smi@17010000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			clocks = <&vencsys CLK_VENC_CKE1_VENC>,
+				 <&vencsys CLK_VENC_CKE1_VENC>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_VENC>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8186-camsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: smi@1a001000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB13>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: smi@1a002000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			clocks = <&camsys CLK_CAM2MM_GALS>, <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: smi@1a00f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a00f000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX_RAWA>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: smi@1a010000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX_RAWB>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		camsys_rawa: clock-controller@1a04f000 {
+			compatible = "mediatek,mt8186-camsys_rawa";
+			reg = <0 0x1a04f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1a06f000 {
+			compatible = "mediatek,mt8186-camsys_rawb";
+			reg = <0 0x1a06f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mdpsys: clock-controller@1b000000 {
+			compatible = "mediatek,mt8186-mdpsys";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: smi@1b002000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1b002000 0 0x1000>;
+			clocks = <&mdpsys CLK_MDP_SMI0>, <&mdpsys CLK_MDP_SMI0>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ipesys: clock-controller@1c000000 {
+			compatible = "mediatek,mt8186-ipesys";
+			reg = <0 0x1c000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb20: smi@1c00f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1c00f000 0 0x1000>;
+			clocks = <&ipesys CLK_IPE_LARB20>, <&ipesys CLK_IPE_LARB20>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
+		};
+
+		larb19: smi@1c10f000 {
+			compatible = "mediatek,mt8186-smi-larb";
+			reg = <0 0x1c10f000 0 0x1000>;
+			clocks = <&ipesys CLK_IPE_LARB19>, <&ipesys CLK_IPE_LARB19>;
+			clock-names = "apb", "smi";
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_IPE>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi
new file mode 100644
index 000000000..f521f50d4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p-rt5682.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#include "mt8192-asurada-audio-rt5682.dtsi"
+#include "mt8192-asurada-audio-rt1015p.dtsi"
+
+&sound {
+	compatible = "mediatek,mt8192_mt6359_rt1015p_rt5682";
+
+	speaker-codecs {
+		sound-dai = <&rt1015p>;
+	};
+
+	headset-codec {
+		sound-dai = <&rt5682 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi
new file mode 100644
index 000000000..e57437899
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt1015p.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+
+/ {
+	rt1015p: audio-codec {
+		compatible = "realtek,rt1015p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1015p_pins>;
+		sdb-gpios = <&pio 147 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&pio {
+	rt1015p_pins: rt1015p-default-pins {
+		pins {
+			pinmux = <PINMUX_GPIO147__FUNC_GPIO147>;
+			output-low;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi
new file mode 100644
index 000000000..05e48b870
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-audio-rt5682.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+&i2c1 {
+	rt5682: audio-codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+		interrupts-extended = <&pio 18 IRQ_TYPE_LEVEL_LOW>;
+		realtek,jd-src = <1>;
+		realtek,btndet-delay = <16>;
+		#sound-dai-cells = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_g>;
+		VBAT-supply = <&pp3300_ldo_z>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
new file mode 100644
index 000000000..6e23428a3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi"
+
+/ {
+	model = "Google Hayato rev1";
+	compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_FORWARD)
+		MATRIX_KEY(0x02, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x01, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x03, 0x04, KEY_SCALE)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&pio {
+	bt_pins: bt-pins {
+		pins-bt-kill {
+			pinmux = <PINMUX_GPIO144__FUNC_GPIO144>;
+			output-low;
+		};
+
+		pins-bt-wake {
+			pinmux = <PINMUX_GPIO22__FUNC_GPIO22>;
+			bias-pull-up;
+		};
+
+		pins-ap-wake-bt {
+			pinmux = <PINMUX_GPIO168__FUNC_GPIO168>;
+			output-low;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO94__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
+			input-enable;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
+		};
+	};
+
+	uart1_pins_sleep: uart1-sleep-pins {
+		pins-rx {
+			pinmux = <PINMUX_GPIO94__FUNC_GPIO94>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-tx {
+			pinmux = <PINMUX_GPIO95__FUNC_UTXD1>;
+		};
+
+		pins-cts {
+			pinmux = <PINMUX_GPIO166__FUNC_UCTS1>;
+			input-enable;
+		};
+
+		pins-rts {
+			pinmux = <PINMUX_GPIO167__FUNC_URTS1>;
+		};
+	};
+};
+
+&touchscreen {
+	compatible = "hid-over-i2c";
+	post-power-on-delay-ms = <10>;
+	hid-descr-addr = <0x0001>;
+	vdd-supply = <&pp3300_u>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+			      <&pio 94 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+
+		enable-gpios = <&pio 144 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&pio 168 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 22 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
new file mode 100644
index 000000000..c6ad10cec
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+/dts-v1/;
+#include "mt8192-asurada.dtsi"
+#include "mt8192-asurada-audio-rt1015p-rt5682.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Google Spherion (rev0 - 3)";
+	compatible = "google,spherion-rev3", "google,spherion-rev2",
+		     "google,spherion-rev1", "google,spherion-rev0",
+		     "google,spherion", "mediatek,mt8192";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		led {
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&cros_ec_pwm {
+	status = "okay";
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_FULL_SCREEN)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&touchscreen {
+	compatible = "elan,ekth3500";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
new file mode 100644
index 000000000..0e8b34117
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -0,0 +1,1450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8192.dtsi"
+#include "mt6359.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c7 = &i2c7;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+		enable-gpios = <&pio 152 0>;
+		brightness-levels = <0 1023>;
+		num-interpolated-steps = <1023>;
+		default-brightness-level = <576>;
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	pp1000_dpbrdg: regulator-1v0-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1000_dpbrdg_en_pins>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vs2_buck_reg>;
+	};
+
+	pp1000_mipibrdg: regulator-1v0-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1000_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1000_mipibrdg_en_pins>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vs2_buck_reg>;
+	};
+
+	pp1800_dpbrdg: regulator-1v8-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_dpbrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vio18_ldo_reg>;
+	};
+
+	/* system wide LDO 1.8V power rail */
+	pp1800_ldo_g: regulator-1v8-g {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo_g";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pp3300_g>;
+	};
+
+	pp1800_mipibrdg: regulator-1v8-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_mipibrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&mt6359_vio18_ldo_reg>;
+	};
+
+	pp3300_dpbrdg: regulator-3v3-dpbrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dpbrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_dpbrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_g>;
+	};
+
+	/* system wide switching 3.3V power rail */
+	pp3300_g: regulator-3v3-g {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_g";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_ldo_z: regulator-3v3-z {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_mipibrdg: regulator-3v3-mipibrdg {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_mipibrdg";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_mipibrdg_en_pins>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_g>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_u: regulator-3v3-u {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_u";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* enable pin wired to GPIO controlled by EC */
+		vin-supply = <&pp3300_g>;
+	};
+
+	pp3300_wlan: regulator-3v3-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wlan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_wlan_pins>;
+		enable-active-high;
+		gpio = <&pio 143 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_a: regulator-5v0-a {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-var-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem_reserved: scp@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		wifi_restricted_dma_region: wifi@c0000000 {
+			compatible = "restricted-dma-pool";
+			reg = <0 0xc0000000 0 0x4000000>;
+		};
+	};
+
+	sound: sound {
+		mediatek,platform = <&afe>;
+		pinctrl-names = "aud_clk_mosi_off",
+				"aud_clk_mosi_on",
+				"aud_dat_mosi_off",
+				"aud_dat_mosi_on",
+				"aud_dat_miso_off",
+				"aud_dat_miso_on",
+				"vow_dat_miso_off",
+				"vow_dat_miso_on",
+				"vow_clk_miso_off",
+				"vow_clk_miso_on",
+				"aud_nle_mosi_off",
+				"aud_nle_mosi_on",
+				"aud_dat_miso2_off",
+				"aud_dat_miso2_on",
+				"aud_gpio_i2s3_off",
+				"aud_gpio_i2s3_on",
+				"aud_gpio_i2s8_off",
+				"aud_gpio_i2s8_on",
+				"aud_gpio_i2s9_off",
+				"aud_gpio_i2s9_on",
+				"aud_dat_mosi_ch34_off",
+				"aud_dat_mosi_ch34_on",
+				"aud_dat_miso_ch34_off",
+				"aud_dat_miso_ch34_on",
+				"aud_gpio_tdm_off",
+				"aud_gpio_tdm_on";
+		pinctrl-0 = <&aud_clk_mosi_off_pins>;
+		pinctrl-1 = <&aud_clk_mosi_on_pins>;
+		pinctrl-2 = <&aud_dat_mosi_off_pins>;
+		pinctrl-3 = <&aud_dat_mosi_on_pins>;
+		pinctrl-4 = <&aud_dat_miso_off_pins>;
+		pinctrl-5 = <&aud_dat_miso_on_pins>;
+		pinctrl-6 = <&vow_dat_miso_off_pins>;
+		pinctrl-7 = <&vow_dat_miso_on_pins>;
+		pinctrl-8 = <&vow_clk_miso_off_pins>;
+		pinctrl-9 = <&vow_clk_miso_on_pins>;
+		pinctrl-10 = <&aud_nle_mosi_off_pins>;
+		pinctrl-11 = <&aud_nle_mosi_on_pins>;
+		pinctrl-12 = <&aud_dat_miso2_off_pins>;
+		pinctrl-13 = <&aud_dat_miso2_on_pins>;
+		pinctrl-14 = <&aud_gpio_i2s3_off_pins>;
+		pinctrl-15 = <&aud_gpio_i2s3_on_pins>;
+		pinctrl-16 = <&aud_gpio_i2s8_off_pins>;
+		pinctrl-17 = <&aud_gpio_i2s8_on_pins>;
+		pinctrl-18 = <&aud_gpio_i2s9_off_pins>;
+		pinctrl-19 = <&aud_gpio_i2s9_on_pins>;
+		pinctrl-20 = <&aud_dat_mosi_ch34_off_pins>;
+		pinctrl-21 = <&aud_dat_mosi_ch34_on_pins>;
+		pinctrl-22 = <&aud_dat_miso_ch34_off_pins>;
+		pinctrl-23 = <&aud_dat_miso_ch34_on_pins>;
+		pinctrl-24 = <&aud_gpio_tdm_off_pins>;
+		pinctrl-25 = <&aud_gpio_tdm_on_pins>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&dsi_out {
+	remote-endpoint = <&anx7625_in>;
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	mali-supply = <&mt6315_7_vbuck1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	touchscreen: touchscreen@10 {
+		reg = <0x10>;
+		interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	clock-stretch-ns = <12600>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		vcc-supply = <&pp3300_u>;
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	anx_bridge: anx7625@58 {
+		compatible = "analogix,anx7625";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&anx7625_pins>;
+		enable-gpios = <&pio 41 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
+		vdd10-supply = <&pp1000_mipibrdg>;
+		vdd18-supply = <&pp1800_mipibrdg>;
+		vdd33-supply = <&pp3300_mipibrdg>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				anx7625_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				anx7625_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&pp3300_mipibrdg>;
+				backlight = <&backlight_lcd0>;
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&anx7625_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+};
+
+&mfg0 {
+	domain-supply = <&mt6315_7_vbuck1>;
+};
+
+&mfg1 {
+	domain-supply = <&mt6359_vsram_others_ldo_reg>;
+};
+
+&mipi_tx0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	supports-cqe;
+	cap-mmc-hw-reset;
+	mmc-hs400-enhanced-strobe;
+	hs400-ds-delay = <0x12814>;
+	no-sdio;
+	no-sd;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cd-gpios = <&pio 17 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&mt6360_ldo5_reg>;
+	vqmmc-supply = <&mt6360_ldo3_reg>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-sdio;
+	no-mmc;
+};
+
+/* for CORE */
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-always-on;
+	regulator-min-microvolt = <575000>;
+	regulator-max-microvolt = <575000>;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <800000>;
+	regulator-coupled-with = <&mt6315_7_vbuck1>;
+	regulator-coupled-max-spread = <10000>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>; /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+	mediatek,mic-type-2 = <2>; /* DMIC */
+};
+
+&nor_flash {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_flash_pins>;
+	assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6_D8>;
+
+	flash@0 {
+		compatible = "winbond,w25q64jwm", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+
+	pcie0: pcie@0,0 {
+		device_type = "pci";
+		reg = <0x0000 0 0 0 0>;
+		num-lanes = <1>;
+		bus-range = <0x1 0x1>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi: wifi@0,0 {
+			reg = <0x10000 0 0 0 0x100000>,
+			      <0x10000 0 0x100000 0 0x100000>;
+			memory-region = <&wifi_restricted_dma_region>;
+		};
+	};
+};
+
+&pio {
+	/* 220 lines */
+	gpio-line-names = "I2S_DP_LRCK",
+			  "IS_DP_BCLK",
+			  "I2S_DP_MCLK",
+			  "I2S_DP_DATAOUT",
+			  "SAR0_INT_ODL",
+			  "EC_AP_INT_ODL",
+			  "EDPBRDG_INT_ODL",
+			  "DPBRDG_INT_ODL",
+			  "DPBRDG_PWREN",
+			  "DPBRDG_RST_ODL",
+			  "I2S_HP_MCLK",
+			  "I2S_HP_BCK",
+			  "I2S_HP_LRCK",
+			  "I2S_HP_DATAIN",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it AP_FLASH_WP_ODL.
+			   */
+			  "AP_FLASH_WP_L",
+			  "TRACKPAD_INT_ODL",
+			  "EC_AP_HPD_OD",
+			  "SD_CD_ODL",
+			  "HP_INT_ODL_ALC",
+			  "EN_PP1000_DPBRDG",
+			  "AP_GPIO20",
+			  "TOUCH_INT_L_1V8",
+			  "UART_BT_WAKE_ODL",
+			  "AP_GPIO23",
+			  "AP_SPI_FLASH_CS_L",
+			  "AP_SPI_FLASH_CLK",
+			  "EN_PP3300_DPBRDG_DX",
+			  "AP_SPI_FLASH_MOSI",
+			  "AP_SPI_FLASH_MISO",
+			  "I2S_HP_DATAOUT",
+			  "AP_GPIO30",
+			  "I2S_SPKR_MCLK",
+			  "I2S_SPKR_BCLK",
+			  "I2S_SPKR_LRCK",
+			  "I2S_SPKR_DATAIN",
+			  "I2S_SPKR_DATAOUT",
+			  "AP_SPI_H1_TPM_CLK",
+			  "AP_SPI_H1_TPM_CS_L",
+			  "AP_SPI_H1_TPM_MISO",
+			  "AP_SPI_H1_TPM_MOSI",
+			  "BL_PWM",
+			  "EDPBRDG_PWREN",
+			  "EDPBRDG_RST_ODL",
+			  "EN_PP3300_HUB",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SD_CLK",
+			  "SD_CMD",
+			  "SD_DATA3",
+			  "SD_DATA0",
+			  "SD_DATA2",
+			  "SD_DATA1",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PCIE_WAKE_ODL",
+			  "PCIE_RST_L",
+			  "PCIE_CLKREQ_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SPMI_SCL",
+			  "SPMI_SDA",
+			  "AP_GOOD",
+			  "UART_DBG_TX_AP_RX",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_AP_TX_BT_RX",
+			  "UART_BT_TX_AP_RX",
+			  "MIPI_DPI_D0_R",
+			  "MIPI_DPI_D1_R",
+			  "MIPI_DPI_D2_R",
+			  "MIPI_DPI_D3_R",
+			  "MIPI_DPI_D4_R",
+			  "MIPI_DPI_D5_R",
+			  "MIPI_DPI_D6_R",
+			  "MIPI_DPI_D7_R",
+			  "MIPI_DPI_D8_R",
+			  "MIPI_DPI_D9_R",
+			  "MIPI_DPI_D10_R",
+			  "",
+			  "",
+			  "MIPI_DPI_DE_R",
+			  "MIPI_DPI_D11_R",
+			  "MIPI_DPI_VSYNC_R",
+			  "MIPI_DPI_CLK_R",
+			  "MIPI_DPI_HSYNC_R",
+			  "PCM_BT_DATAIN",
+			  "PCM_BT_SYNC",
+			  "PCM_BT_DATAOUT",
+			  "PCM_BT_CLK",
+			  "AP_I2C_AUDIO_SCL",
+			  "AP_I2C_AUDIO_SDA",
+			  "SCP_I2C_SCL",
+			  "SCP_I2C_SDA",
+			  "AP_I2C_WLAN_SCL",
+			  "AP_I2C_WLAN_SDA",
+			  "AP_I2C_DPBRDG_SCL",
+			  "AP_I2C_DPBRDG_SDA",
+			  "EN_PP1800_DPBRDG_DX",
+			  "EN_PP3300_EDP_DX",
+			  "EN_PP1800_EDPBRDG_DX",
+			  "EN_PP1000_EDPBRDG",
+			  "SCP_JTAG0_TDO",
+			  "SCP_JTAG0_TDI",
+			  "SCP_JTAG0_TMS",
+			  "SCP_JTAG0_TCK",
+			  "SCP_JTAG0_TRSTN",
+			  "EN_PP3000_VMC_PMU",
+			  "EN_PP3300_DISPLAY_DX",
+			  "TOUCH_RST_L_1V8",
+			  "TOUCH_REPORT_DISABLE",
+			  "",
+			  "",
+			  "AP_I2C_TRACKPAD_SCL_1V8",
+			  "AP_I2C_TRACKPAD_SDA_1V8",
+			  "EN_PP3300_WLAN",
+			  "BT_KILL_L",
+			  "WIFI_KILL_L",
+			  "SET_VMC_VOLT_AT_1V8",
+			  "EN_SPK",
+			  "AP_WARM_RST_REQ",
+			  "",
+			  "",
+			  "EN_PP3000_SD_S3",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "",
+			  "AP_SPI_EC_CLK",
+			  "AP_SPI_EC_CS_L",
+			  "AP_SPI_EC_MISO",
+			  "AP_SPI_EC_MOSI",
+			  "AP_I2C_EDPBRDG_SCL",
+			  "AP_I2C_EDPBRDG_SDA",
+			  "MT6315_PROC_INT",
+			  "MT6315_GPU_INT",
+			  "UART_SERVO_TX_SCP_RX",
+			  "UART_SCP_TX_SERVO_RX",
+			  "BT_RTS_AP_CTS",
+			  "AP_RTS_BT_CTS",
+			  "UART_AP_WAKE_BT_ODL",
+			  "WLAN_ALERT_ODL",
+			  "EC_IN_RW_ODL",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MSDC0_CMD",
+			  "MSDC0_DAT0",
+			  "MSDC0_DAT2",
+			  "MSDC0_DAT4",
+			  "MSDC0_DAT6",
+			  "MSDC0_DAT1",
+			  "MSDC0_DAT5",
+			  "MSDC0_DAT7",
+			  "MSDC0_DSL",
+			  "MSDC0_CLK",
+			  "MSDC0_DAT3",
+			  "MSDC0_RST_L",
+			  "SCP_VREQ_VAO",
+			  "AUD_DAT_MOSI2",
+			  "AUD_NLE_MOSI1",
+			  "AUD_NLE_MOSI0",
+			  "AUD_DAT_MISO2",
+			  "AP_I2C_SAR_SDA",
+			  "AP_I2C_SAR_SCL",
+			  "AP_I2C_PWR_SCL",
+			  "AP_I2C_PWR_SDA",
+			  "AP_I2C_TS_SCL_1V8",
+			  "AP_I2C_TS_SDA_1V8",
+			  "SRCLKENA0",
+			  "SRCLKENA1",
+			  "AP_EC_WATCHDOG_L",
+			  "PWRAP_SPI0_MI",
+			  "PWRAP_SPI0_CSN",
+			  "PWRAP_SPI0_MO",
+			  "PWRAP_SPI0_CK",
+			  "AP_RTC_CLK32K",
+			  "AUD_CLK_MOSI",
+			  "AUD_SYNC_MOSI",
+			  "AUD_DAT_MOSI0",
+			  "AUD_DAT_MOSI1",
+			  "AUD_DAT_MISO0",
+			  "AUD_DAT_MISO1";
+
+	anx7625_pins: anx7625-default-pins {
+		pins-out {
+			pinmux = <PINMUX_GPIO41__FUNC_GPIO41>,
+				 <PINMUX_GPIO42__FUNC_GPIO42>;
+			output-low;
+		};
+
+		pins-in {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	aud_clk_mosi_off_pins: aud-clk-mosi-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO214__FUNC_GPIO214>,
+				 <PINMUX_GPIO215__FUNC_GPIO215>;
+		};
+	};
+
+	aud_clk_mosi_on_pins: aud-clk-mosi-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO214__FUNC_AUD_CLK_MOSI>,
+				 <PINMUX_GPIO215__FUNC_AUD_SYNC_MOSI>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_dat_miso_ch34_off_pins: aud-dat-miso-ch34-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
+		};
+	};
+
+	aud_dat_miso_ch34_on_pins: aud-dat-miso-ch34-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	aud_dat_miso_off_pins: aud-dat-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>,
+				 <PINMUX_GPIO219__FUNC_GPIO219>;
+		};
+	};
+
+	aud_dat_miso_on_pins: aud-dat-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO218__FUNC_AUD_DAT_MISO0>,
+				 <PINMUX_GPIO219__FUNC_AUD_DAT_MISO1>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_dat_miso2_off_pins: aud-dat-miso2-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO199__FUNC_GPIO199>;
+		};
+	};
+
+	aud_dat_miso2_on_pins: aud-dat-miso2-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO199__FUNC_AUD_DAT_MISO2>;
+		};
+	};
+
+	aud_dat_mosi_ch34_off_pins: aud-dat-mosi-ch34-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO196__FUNC_GPIO196>;
+		};
+	};
+
+	aud_dat_mosi_ch34_on_pins: aud-dat-mosi-ch34-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO196__FUNC_AUD_DAT_MOSI2>;
+		};
+	};
+
+	aud_dat_mosi_off_pins: aud-dat-mosi-off-pins {
+		pins-mosi-off {
+			pinmux = <PINMUX_GPIO216__FUNC_GPIO216>,
+				 <PINMUX_GPIO217__FUNC_GPIO217>;
+		};
+	};
+
+	aud_dat_mosi_on_pins: aud-dat-mosi-on-pins {
+		pins-mosi-on {
+			pinmux = <PINMUX_GPIO216__FUNC_AUD_DAT_MOSI0>,
+				 <PINMUX_GPIO217__FUNC_AUD_DAT_MOSI1>;
+			drive-strength = <10>;
+		};
+	};
+
+	aud_gpio_i2s3_off_pins: aud-gpio-i2s3-off-pins {
+		pins-i2s3-off {
+			pinmux = <PINMUX_GPIO32__FUNC_GPIO32>,
+				 <PINMUX_GPIO33__FUNC_GPIO33>,
+				 <PINMUX_GPIO35__FUNC_GPIO35>;
+		};
+	};
+
+	aud_gpio_i2s3_on_pins: aud-gpio-i2s3-on-pins {
+		pins-i2s3-on {
+			pinmux = <PINMUX_GPIO32__FUNC_I2S3_BCK>,
+				 <PINMUX_GPIO33__FUNC_I2S3_LRCK>,
+				 <PINMUX_GPIO35__FUNC_I2S3_DO>;
+		};
+	};
+
+	aud_gpio_i2s8_off_pins: aud-gpio-i2s8-off-pins {
+		pins-i2s8-off {
+			pinmux = <PINMUX_GPIO10__FUNC_GPIO10>,
+				 <PINMUX_GPIO11__FUNC_GPIO11>,
+				 <PINMUX_GPIO12__FUNC_GPIO12>,
+				 <PINMUX_GPIO13__FUNC_GPIO13>;
+		};
+	};
+
+	aud_gpio_i2s8_on_pins: aud-gpio-i2s8-on-pins {
+		pins-i2s8-on {
+			pinmux = <PINMUX_GPIO10__FUNC_I2S8_MCK>,
+				 <PINMUX_GPIO11__FUNC_I2S8_BCK>,
+				 <PINMUX_GPIO12__FUNC_I2S8_LRCK>,
+				 <PINMUX_GPIO13__FUNC_I2S8_DI>;
+		};
+	};
+
+	aud_gpio_i2s9_off_pins: aud-gpio-i2s9-off-pins {
+		pins-i2s9-off {
+			pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
+		};
+	};
+
+	aud_gpio_i2s9_on_pins: aud-gpio-i2s9-on-pins {
+		pins-i2s9-on {
+			pinmux = <PINMUX_GPIO29__FUNC_I2S9_DO>;
+		};
+	};
+
+	aud_gpio_tdm_off_pins: aud-gpio-tdm-off-pins {
+		pins-tdm-off {
+			pinmux = <PINMUX_GPIO0__FUNC_GPIO0>,
+				 <PINMUX_GPIO1__FUNC_GPIO1>,
+				 <PINMUX_GPIO2__FUNC_GPIO2>,
+				 <PINMUX_GPIO3__FUNC_GPIO3>;
+		};
+	};
+
+	aud_gpio_tdm_on_pins: aud-gpio-tdm-on-pins {
+		pins-tdm-on {
+			pinmux = <PINMUX_GPIO0__FUNC_TDM_LRCK>,
+				 <PINMUX_GPIO1__FUNC_TDM_BCK>,
+				 <PINMUX_GPIO2__FUNC_TDM_MCK>,
+				 <PINMUX_GPIO3__FUNC_TDM_DATA0>;
+		};
+	};
+
+	aud_nle_mosi_off_pins: aud-nle-mosi-off-pins {
+		pins-nle-mosi-off {
+			pinmux = <PINMUX_GPIO197__FUNC_GPIO197>,
+				 <PINMUX_GPIO198__FUNC_GPIO198>;
+		};
+	};
+
+	aud_nle_mosi_on_pins: aud-nle-mosi-on-pins {
+		pins-nle-mosi-on {
+			pinmux = <PINMUX_GPIO197__FUNC_AUD_NLE_MOSI1>,
+				 <PINMUX_GPIO198__FUNC_AUD_NLE_MOSI0>;
+		};
+	};
+
+	cr50_int: cr50-irq-default-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO171__FUNC_GPIO171>;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-irq-default-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
+				 <PINMUX_GPIO205__FUNC_SDA0>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
+				 <PINMUX_GPIO119__FUNC_SDA1>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
+				 <PINMUX_GPIO142__FUNC_SDA2>;
+			bias-pull-up = <MTK_PULL_SET_RSEL_011>;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
+				 <PINMUX_GPIO161__FUNC_SDA3>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
+				 <PINMUX_GPIO125__FUNC_SDA7>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO184__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO188__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO185__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO193__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO186__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO189__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO187__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO190__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO183__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <10>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO192__FUNC_MSDC0_CLK>;
+			drive-strength = <10>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO194__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO191__FUNC_MSDC0_DSL>;
+			drive-strength = <10>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO54__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO56__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO55__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO53__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO52__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO51__FUNC_MSDC1_CLK>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_flash_pins: nor-flash-default-pins {
+		pins-cs-io1 {
+			pinmux = <PINMUX_GPIO24__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO28__FUNC_SPINOR_IO1>;
+			input-enable;
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pins-io0 {
+			pinmux = <PINMUX_GPIO27__FUNC_SPINOR_IO0>;
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO25__FUNC_SPINOR_CK>;
+			input-enable;
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	pcie_pins: pcie-default-pins {
+		pins-pcie-wake {
+			pinmux = <PINMUX_GPIO63__FUNC_PCIE_WAKE_N>;
+			bias-pull-up;
+		};
+
+		pins-pcie-pereset {
+			pinmux = <PINMUX_GPIO64__FUNC_PCIE_PERESET_N>;
+		};
+
+		pins-pcie-clkreq {
+			pinmux = <PINMUX_GPIO65__FUNC_PCIE_CLKREQ_N>;
+			bias-pull-up;
+		};
+
+		pins-wifi-kill {
+			pinmux = <PINMUX_GPIO145__FUNC_GPIO145>; /* WIFI_KILL_L */
+			output-high;
+		};
+	};
+
+	pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
+			output-low;
+		};
+	};
+
+	pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			output-low;
+		};
+	};
+
+	pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
+			output-low;
+		};
+	};
+
+	pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
+			output-low;
+		};
+	};
+
+	pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
+			output-low;
+		};
+	};
+
+	pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins {
+		pins-en {
+			pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
+			output-low;
+		};
+	};
+
+	pp3300_wlan_pins: pp3300-wlan-pins {
+		pins-pcie-en-pp3300-wlan {
+			pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
+			output-high;
+		};
+	};
+
+	pwm0_pins: pwm0-default-pins {
+		pins-pwm {
+			pinmux = <PINMUX_GPIO40__FUNC_DISP_PWM>;
+		};
+
+		pins-inhibit {
+			pinmux = <PINMUX_GPIO152__FUNC_GPIO152>;
+			output-high;
+		};
+	};
+
+	scp_pins: scp-pins {
+		pins-vreq-vao {
+			pinmux = <PINMUX_GPIO195__FUNC_SCP_VREQ_VAO>;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+			bias-pull-down;
+		};
+	};
+
+	spi5_pins: spi5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
+				 <PINMUX_GPIO37__FUNC_GPIO37>,
+				 <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
+				 <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	trackpad_pins: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+		};
+	};
+
+	touchscreen_pins: touchscreen-default-pins {
+		pins-irq {
+			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-reset {
+			pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
+			output-high;
+		};
+
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
+			output-low;
+		};
+	};
+
+	vow_clk_miso_off_pins: vow-clk-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO219__FUNC_GPIO219>;
+		};
+	};
+
+	vow_clk_miso_on_pins: vow-clk-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO219__FUNC_VOW_CLK_MISO>;
+		};
+	};
+
+	vow_dat_miso_off_pins: vow-dat-miso-off-pins {
+		pins-miso-off {
+			pinmux = <PINMUX_GPIO218__FUNC_GPIO218>;
+		};
+	};
+
+	vow_dat_miso_on_pins: vow-dat-miso-on-pins {
+		pins-miso-on {
+			pinmux = <PINMUX_GPIO218__FUNC_VOW_DAT_MISO>;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 214 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+};
+
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8192/scp.img";
+	memory-region = <&scp_mem_reserved>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros-ec {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	mediatek,pad-select = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		base_detection: cbas {
+			compatible = "google,cros-cbas";
+		};
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+
+			status = "disabled";
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mt6360_ldo3_reg: regulator@0 {
+			compatible = "google,cros-ec-regulator";
+			reg = <0>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		mt6360_ldo5_reg: regulator@1 {
+			compatible = "google,cros-ec-regulator";
+			reg = <1>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&spi5 {
+	status = "okay";
+
+	cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cr50_int>;
+	};
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315_6: pmic@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+
+			mt6315_6_vbuck3: vbuck3 {
+				regulator-compatible = "vbuck3";
+				regulator-name = "Vlcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315_7: pmic@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <606250>;
+				regulator-max-microvolt = <800000>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>;
+				regulator-coupled-max-spread = <10000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+
+	wakeup-source;
+	vusb33-supply = <&pp3300_g>;
+	vbus-supply = <&pp5000_a>;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
new file mode 100644
index 000000000..808be492e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8192.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	model = "MediaTek MT8192 evaluation board";
+	compatible = "mediatek,mt8192-evb", "mediatek,mt8192";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
new file mode 100644
index 000000000..69f4cded5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -0,0 +1,1902 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mt8192-clk.h>
+#include <dt-bindings/gce/mt8192-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8192-larb-port.h>
+#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt8192-power.h>
+#include <dt-bindings/reset/mt8192-resets.h>
+
+/ {
+	compatible = "mediatek,mt8192";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		ovl-2l0 = &ovl_2l0;
+		ovl-2l2 = &ovl_2l2;
+		rdma0 = &rdma0;
+		rdma4 = &rdma4;
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			clock-frequency = <1701000000>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			performance-domains = <&performance 0>;
+			capacity-dmips-mhz = <427>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x400>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x500>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			clock-frequency = <2171000000>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			performance-domains = <&performance 1>;
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+				core6 {
+					cpu = <&cpu6>;
+				};
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <140>;
+				min-residency-us = <780>;
+			};
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <35>;
+				exit-latency-us = <145>;
+				min-residency-us = <720>;
+			};
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <60>;
+				exit-latency-us = <155>;
+				min-residency-us = <860>;
+			};
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <40>;
+				exit-latency-us = <155>;
+				min-residency-us = <780>;
+			};
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clock-frequency = <13000000>;
+	};
+
+	gpu_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			opp-microvolt = <606250>;
+		};
+
+		opp-399000000 {
+			opp-hz = /bits/ 64 <399000000>;
+			opp-microvolt = <618750>;
+		};
+
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <631250>;
+		};
+
+		opp-482000000 {
+			opp-hz = /bits/ 64 <482000000>;
+			opp-microvolt = <643750>;
+		};
+
+		opp-523000000 {
+			opp-hz = /bits/ 64 <523000000>;
+			opp-microvolt = <656250>;
+		};
+
+		opp-564000000 {
+			opp-hz = /bits/ 64 <564000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-605000000 {
+			opp-hz = /bits/ 64 <605000000>;
+			opp-microvolt = <681250>;
+		};
+
+		opp-647000000 {
+			opp-hz = /bits/ 64 <647000000>;
+			opp-microvolt = <693750>;
+		};
+
+		opp-688000000 {
+			opp-hz = /bits/ 64 <688000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-724000000 {
+			opp-hz = /bits/ 64 <724000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-748000000 {
+			opp-hz = /bits/ 64 <748000000>;
+			opp-microvolt = <737500>;
+		};
+
+		opp-772000000 {
+			opp-hz = /bits/ 64 <772000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-795000000 {
+			opp-hz = /bits/ 64 <795000000>;
+			opp-microvolt = <762500>;
+		};
+
+		opp-819000000 {
+			opp-hz = /bits/ 64 <819000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-843000000 {
+			opp-hz = /bits/ 64 <843000000>;
+			opp-microvolt = <787500>;
+		};
+
+		opp-866000000 {
+			opp-hz = /bits/ 64 <866000000>;
+			opp-microvolt = <800000>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+		ranges;
+
+		performance: performance-controller@11bc10 {
+			compatible = "mediatek,cpufreq-hw";
+			reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+			#performance-domain-cells = <1>;
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8192-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8192-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8192-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8192-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11c20000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11d30000 0 0x1000>,
+			      <0 0x11d40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e70000 0 0x1000>,
+			      <0 0x11ea0000 0 0x1000>,
+			      <0 0x11f20000 0 0x1000>,
+			      <0 0x11f30000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+				    "iocfg_bl", "iocfg_br", "iocfg_lm",
+				    "iocfg_lb", "iocfg_rt", "iocfg_lt",
+				    "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 220>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8192-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8192-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				power-domain@MT8192_POWER_DOMAIN_AUDIO {
+					reg = <MT8192_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+						 <&infracfg CLK_INFRA_AUDIO_26M_B>,
+						 <&infracfg CLK_INFRA_AUDIO>;
+					clock-names = "audio", "audio1", "audio2";
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_CONN {
+					reg = <MT8192_POWER_DOMAIN_CONN>;
+					clocks = <&infracfg CLK_INFRA_PMIC_CONN>;
+					clock-names = "conn";
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				mfg0: power-domain@MT8192_POWER_DOMAIN_MFG0 {
+					reg = <MT8192_POWER_DOMAIN_MFG0>;
+					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>,
+						 <&topckgen CLK_TOP_MFG_REF_SEL>;
+					clock-names = "mfg", "alt";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					mfg1: power-domain@MT8192_POWER_DOMAIN_MFG1 {
+						reg = <MT8192_POWER_DOMAIN_MFG1>;
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_MFG2 {
+							reg = <MT8192_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG3 {
+							reg = <MT8192_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG4 {
+							reg = <MT8192_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG5 {
+							reg = <MT8192_POWER_DOMAIN_MFG5>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG6 {
+							reg = <MT8192_POWER_DOMAIN_MFG6>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_DISP {
+					reg = <MT8192_POWER_DOMAIN_DISP>;
+					clocks = <&topckgen CLK_TOP_DISP_SEL>,
+						 <&mmsys CLK_MM_SMI_INFRA>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_GALS>,
+						 <&mmsys CLK_MM_SMI_IOMMU>;
+					clock-names = "disp", "disp-0", "disp-1", "disp-2",
+						      "disp-3";
+					mediatek,infracfg = <&infracfg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8192_POWER_DOMAIN_IPE {
+						reg = <MT8192_POWER_DOMAIN_IPE>;
+						clocks = <&topckgen CLK_TOP_IPE_SEL>,
+							 <&ipesys CLK_IPE_LARB19>,
+							 <&ipesys CLK_IPE_LARB20>,
+							 <&ipesys CLK_IPE_SMI_SUBCOM>,
+							 <&ipesys CLK_IPE_GALS>;
+						clock-names = "ipe", "ipe-0", "ipe-1", "ipe-2",
+							      "ipe-3";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_ISP {
+						reg = <MT8192_POWER_DOMAIN_ISP>;
+						clocks = <&topckgen CLK_TOP_IMG1_SEL>,
+							 <&imgsys CLK_IMG_LARB9>,
+							 <&imgsys CLK_IMG_GALS>;
+						clock-names = "isp", "isp-0", "isp-1";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_ISP2 {
+						reg = <MT8192_POWER_DOMAIN_ISP2>;
+						clocks = <&topckgen CLK_TOP_IMG2_SEL>,
+							 <&imgsys2 CLK_IMG2_LARB11>,
+							 <&imgsys2 CLK_IMG2_GALS>;
+						clock-names = "isp2", "isp2-0", "isp2-1";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_MDP {
+						reg = <MT8192_POWER_DOMAIN_MDP>;
+						clocks = <&topckgen CLK_TOP_MDP_SEL>,
+							 <&mdpsys CLK_MDP_SMI0>;
+						clock-names = "mdp", "mdp-0";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_VENC {
+						reg = <MT8192_POWER_DOMAIN_VENC>;
+						clocks = <&topckgen CLK_TOP_VENC_SEL>,
+							 <&vencsys CLK_VENC_SET1_VENC>;
+						clock-names = "venc", "venc-0";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_VDEC {
+						reg = <MT8192_POWER_DOMAIN_VDEC>;
+						clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+							 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+							 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+							 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+						clock-names = "vdec", "vdec-0", "vdec-1", "vdec-2";
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_VDEC2 {
+							reg = <MT8192_POWER_DOMAIN_VDEC2>;
+							clocks = <&vdecsys CLK_VDEC_VDEC>,
+								 <&vdecsys CLK_VDEC_LAT>,
+								 <&vdecsys CLK_VDEC_LARB1>;
+							clock-names = "vdec2-0", "vdec2-1",
+								      "vdec2-2";
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_CAM {
+						reg = <MT8192_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_CAM_SEL>,
+							 <&camsys CLK_CAM_LARB13>,
+							 <&camsys CLK_CAM_LARB14>,
+							 <&camsys CLK_CAM_CCU_GALS>,
+							 <&camsys CLK_CAM_CAM2MM_GALS>;
+						clock-names = "cam", "cam-0", "cam-1", "cam-2",
+							      "cam-3";
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWA {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWA>;
+							clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+							clock-names = "cam_rawa-0";
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWB {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWB>;
+							clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+							clock-names = "cam_rawb-0";
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWC {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWC>;
+							clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>;
+							clock-names = "cam_rawc-0";
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8192-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8192-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8192-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10026000 {
+			compatible = "mediatek,mt6873-pwrap";
+			reg = <0 0x10026000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+				 <&infracfg CLK_INFRA_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+		};
+
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt6873-spmi";
+			reg = <0 0x10027000 0 0x000e00>,
+			      <0 0x10029000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+				 <&infracfg CLK_INFRA_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_MST_SEL>;
+			clock-names = "pmif_sys_ck",
+				      "pmif_tmr_ck",
+				      "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+		};
+
+		gce: mailbox@10228000 {
+			compatible = "mediatek,mt8192-gce";
+			reg = <0 0x10228000 0 0x4000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_GCE>;
+			clock-names = "gce";
+		};
+
+		scp_adsp: clock-controller@10720000 {
+			compatible = "mediatek,mt8192-scp_adsp";
+			reg = <0 0x10720000 0 0x1000>;
+			#clock-cells = <1>;
+			/* power domain dependency not upstreamed */
+			status = "fail";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8192-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8192-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		imp_iic_wrap_c: clock-controller@11007000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_c";
+			reg = <0 0x11007000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
+				 <&infracfg CLK_INFRA_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi6: spi@1101d000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1101d000 0 0x1000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI6>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi7: spi@1101e000 {
+			compatible = "mediatek,mt8192-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1101e000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI7>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8192-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>,
+			      <0 0x10700000 0 0x8000>;
+			reg-names = "sram", "cfg", "l1tcm";
+			interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_SCPSYS>;
+			clock-names = "main";
+			status = "disabled";
+		};
+
+		xhci: usb@11200000 {
+			compatible = "mediatek,mt8192-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts-extended = <&gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "host";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg CLK_INFRA_SSUSB>,
+				 <&apmixedsys CLK_APMIXED_USBPLL>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&infracfg CLK_INFRA_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 102>;
+			status = "disabled";
+		};
+
+		audsys: syscon@11210000 {
+			compatible = "mediatek,mt8192-audsys", "syscon";
+			reg = <0 0x11210000 0 0x2000>;
+			#clock-cells = <1>;
+
+			afe: mt8192-afe-pcm {
+				compatible = "mediatek,mt8192-audio";
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>;
+				resets = <&watchdog 17>;
+				reset-names = "audiosys";
+				mediatek,apmixedsys = <&apmixedsys>;
+				mediatek,infracfg = <&infracfg>;
+				mediatek,topckgen = <&topckgen>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_AUDIO>;
+				clocks = <&audsys CLK_AUD_AFE>,
+					 <&audsys CLK_AUD_DAC>,
+					 <&audsys CLK_AUD_DAC_PREDIS>,
+					 <&audsys CLK_AUD_ADC>,
+					 <&audsys CLK_AUD_ADDA6_ADC>,
+					 <&audsys CLK_AUD_22M>,
+					 <&audsys CLK_AUD_24M>,
+					 <&audsys CLK_AUD_APLL_TUNER>,
+					 <&audsys CLK_AUD_APLL2_TUNER>,
+					 <&audsys CLK_AUD_TDM>,
+					 <&audsys CLK_AUD_TML>,
+					 <&audsys CLK_AUD_NLE>,
+					 <&audsys CLK_AUD_DAC_HIRES>,
+					 <&audsys CLK_AUD_ADC_HIRES>,
+					 <&audsys CLK_AUD_ADC_HIRES_TML>,
+					 <&audsys CLK_AUD_ADDA6_ADC_HIRES>,
+					 <&audsys CLK_AUD_3RD_DAC>,
+					 <&audsys CLK_AUD_3RD_DAC_PREDIS>,
+					 <&audsys CLK_AUD_3RD_DAC_TML>,
+					 <&audsys CLK_AUD_3RD_DAC_HIRES>,
+					 <&infracfg CLK_INFRA_AUDIO>,
+					 <&infracfg CLK_INFRA_AUDIO_26M_B>,
+					 <&topckgen CLK_TOP_AUDIO_SEL>,
+					 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+					 <&topckgen CLK_TOP_MAINPLL_D4_D4>,
+					 <&topckgen CLK_TOP_AUD_1_SEL>,
+					 <&topckgen CLK_TOP_APLL1>,
+					 <&topckgen CLK_TOP_AUD_2_SEL>,
+					 <&topckgen CLK_TOP_APLL2>,
+					 <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+					 <&topckgen CLK_TOP_APLL1_D4>,
+					 <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+					 <&topckgen CLK_TOP_APLL2_D4>,
+					 <&topckgen CLK_TOP_APLL_I2S0_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S1_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S2_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S3_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S4_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S5_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S6_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S7_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S8_M_SEL>,
+					 <&topckgen CLK_TOP_APLL_I2S9_M_SEL>,
+					 <&topckgen CLK_TOP_APLL12_DIV0>,
+					 <&topckgen CLK_TOP_APLL12_DIV1>,
+					 <&topckgen CLK_TOP_APLL12_DIV2>,
+					 <&topckgen CLK_TOP_APLL12_DIV3>,
+					 <&topckgen CLK_TOP_APLL12_DIV4>,
+					 <&topckgen CLK_TOP_APLL12_DIVB>,
+					 <&topckgen CLK_TOP_APLL12_DIV5>,
+					 <&topckgen CLK_TOP_APLL12_DIV6>,
+					 <&topckgen CLK_TOP_APLL12_DIV7>,
+					 <&topckgen CLK_TOP_APLL12_DIV8>,
+					 <&topckgen CLK_TOP_APLL12_DIV9>,
+					 <&topckgen CLK_TOP_AUDIO_H_SEL>,
+					 <&clk26m>;
+				clock-names = "aud_afe_clk",
+					      "aud_dac_clk",
+					      "aud_dac_predis_clk",
+					      "aud_adc_clk",
+					      "aud_adda6_adc_clk",
+					      "aud_apll22m_clk",
+					      "aud_apll24m_clk",
+					      "aud_apll1_tuner_clk",
+					      "aud_apll2_tuner_clk",
+					      "aud_tdm_clk",
+					      "aud_tml_clk",
+					      "aud_nle",
+					      "aud_dac_hires_clk",
+					      "aud_adc_hires_clk",
+					      "aud_adc_hires_tml",
+					      "aud_adda6_adc_hires_clk",
+					      "aud_3rd_dac_clk",
+					      "aud_3rd_dac_predis_clk",
+					      "aud_3rd_dac_tml",
+					      "aud_3rd_dac_hires_clk",
+					      "aud_infra_clk",
+					      "aud_infra_26m_clk",
+					      "top_mux_audio",
+					      "top_mux_audio_int",
+					      "top_mainpll_d4_d4",
+					      "top_mux_aud_1",
+					      "top_apll1_ck",
+					      "top_mux_aud_2",
+					      "top_apll2_ck",
+					      "top_mux_aud_eng1",
+					      "top_apll1_d4",
+					      "top_mux_aud_eng2",
+					      "top_apll2_d4",
+					      "top_i2s0_m_sel",
+					      "top_i2s1_m_sel",
+					      "top_i2s2_m_sel",
+					      "top_i2s3_m_sel",
+					      "top_i2s4_m_sel",
+					      "top_i2s5_m_sel",
+					      "top_i2s6_m_sel",
+					      "top_i2s7_m_sel",
+					      "top_i2s8_m_sel",
+					      "top_i2s9_m_sel",
+					      "top_apll12_div0",
+					      "top_apll12_div1",
+					      "top_apll12_div2",
+					      "top_apll12_div3",
+					      "top_apll12_div4",
+					      "top_apll12_divb",
+					      "top_apll12_div5",
+					      "top_apll12_div6",
+					      "top_apll12_div7",
+					      "top_apll12_div8",
+					      "top_apll12_div9",
+					      "top_mux_audio_h",
+					      "top_clk26m_clk";
+			};
+		};
+
+		pcie: pcie@11230000 {
+			compatible = "mediatek,mt8192-pcie";
+			device_type = "pci";
+			reg = <0 0x11230000 0 0x2000>;
+			reg-names = "pcie-mac";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&infracfg CLK_INFRA_PCIE_PL_P_250M>,
+				 <&infracfg CLK_INFRA_PCIE_TL_26M>,
+				 <&infracfg CLK_INFRA_PCIE_TL_96M>,
+				 <&infracfg CLK_INFRA_PCIE_TL_32K>,
+				 <&infracfg CLK_INFRA_PCIE_PERI_26M>,
+				 <&infracfg CLK_INFRA_PCIE_TOP_H_133M>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "top_133m";
+			assigned-clocks = <&topckgen CLK_TOP_TL_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D6_D4>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x82000000 0 0x12000000 0x0 0x12000000 0 0x0800000>,
+				 <0x81000000 0 0x12800000 0x0 0x12800000 0 0x0800000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		nor_flash: spi@11234000 {
+			compatible = "mediatek,mt8192-nor";
+			reg = <0 0x11234000 0 0xe0>;
+			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_SFLASH_SEL>,
+				 <&infracfg CLK_INFRA_FLASHIF_SFLASH>,
+				 <&infracfg CLK_INFRA_FLASHIF_TOP_H_133M>;
+			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
+			assigned-clock-parents = <&clk26m>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8192-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lvts_e_data1: data1@1c0 {
+				reg = <0x1c0 0x58>;
+			};
+
+			svs_calibration: calib@580 {
+				reg = <0x580 0x68>;
+			};
+		};
+
+		i2c3: i2c@11cb0000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11cb0000 0 0x1000>,
+			      <0 0x10217300 0 0x80>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_e: clock-controller@11cb1000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_e";
+			reg = <0 0x11cb1000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c7: i2c@11d00000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x10217600 0 0x180>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@11d01000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d01000 0 0x1000>,
+			      <0 0x10217780 0 0x180>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c9: i2c@11d02000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d02000 0 0x1000>,
+			      <0 0x10217900 0 0x180>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_s: clock-controller@11d03000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_s";
+			reg = <0 0x11d03000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c1: i2c@11d20000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d20000 0 0x1000>,
+			      <0 0x10217100 0 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11d21000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d21000 0 0x1000>,
+			      <0 0x10217180 0 0x180>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11d22000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11d22000 0 0x1000>,
+			      <0 0x10217380 0 0x180>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_ws: clock-controller@11d23000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_ws";
+			reg = <0 0x11d23000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c5: i2c@11e00000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10217500 0 0x80>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e01000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_w";
+			reg = <0 0x11e01000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy0: t-phy@11e40000 {
+			compatible = "mediatek,mt8192-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x11e40000 0x1000>;
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		mipi_tx0: dsi-phy@11e50000 {
+			compatible = "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11e50000 0 0x1000>;
+			clocks = <&apmixedsys CLK_APMIXED_MIPID26M>;
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11f00000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11f00000 0 0x1000>,
+			      <0 0x10217080 0 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11f01000 {
+			compatible = "mediatek,mt8192-i2c";
+			reg = <0 0x11f01000 0 0x1000>,
+			      <0 0x10217580 0 0x80>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
+			clock-names = "main", "dma";
+			clock-div = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_n: clock-controller@11f02000 {
+			compatible = "mediatek,mt8192-imp_iic_wrap_n";
+			reg = <0 0x11f02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		msdc_top: clock-controller@11f10000 {
+			compatible = "mediatek,mt8192-msdc_top";
+			reg = <0 0x11f10000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmc0: mmc@11f60000 {
+			compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&msdc_top CLK_MSDC_TOP_H_MST_0P>,
+				 <&msdc_top CLK_MSDC_TOP_SRC_0P>,
+				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
+				 <&msdc_top CLK_MSDC_TOP_P_MSDC0>,
+				 <&msdc_top CLK_MSDC_TOP_AXI>,
+				 <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+			clock-names = "source", "hclk", "source_cg", "sys_cg",
+				      "pclk_cg", "axi_cg", "ahb_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11f70000 {
+			compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&msdc_top CLK_MSDC_TOP_H_MST_1P>,
+				 <&msdc_top CLK_MSDC_TOP_SRC_1P>,
+				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
+				 <&msdc_top CLK_MSDC_TOP_P_MSDC1>,
+				 <&msdc_top CLK_MSDC_TOP_AXI>,
+				 <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+			clock-names = "source", "hclk", "source_cg", "sys_cg",
+				      "pclk_cg", "axi_cg", "ahb_cg";
+			status = "disabled";
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8192-mali", "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+			interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+
+			clocks = <&apmixedsys CLK_APMIXED_MFGPLL>;
+
+			power-domains = <&spm MT8192_POWER_DOMAIN_MFG2>,
+					<&spm MT8192_POWER_DOMAIN_MFG3>,
+					<&spm MT8192_POWER_DOMAIN_MFG4>,
+					<&spm MT8192_POWER_DOMAIN_MFG5>,
+					<&spm MT8192_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8192-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8192-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8192-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8192-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_INFRA>,
+				 <&mmsys CLK_MM_SMI_GALS>,
+				 <&mmsys CLK_MM_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		larb0: larb@14003000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		larb1: larb@14004000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x14004000 0 0x1000>;
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+		};
+
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			iommus = <&iommu0 M4U_PORT_L0_OVL_RDMA0>,
+				 <&iommu0 M4U_PORT_L0_OVL_RDMA0_HDR>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+		};
+
+		ovl_2l0: ovl@14006000 {
+			compatible = "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0>,
+				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA0_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8192-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			iommus = <&iommu0 M4U_PORT_L0_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+		};
+
+		color0: color@14009000 {
+			compatible = "mediatek,mt8192-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+		};
+
+		ccorr0: ccorr@1400a000 {
+			compatible = "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400a000 0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+		};
+
+		aal0: aal@1400b000 {
+			compatible = "mediatek,mt8192-disp-aal",
+				     "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400b000 0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+		};
+
+		gamma0: gamma@1400c000 {
+			compatible = "mediatek,mt8192-disp-gamma",
+				     "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400c000 0 0x1000>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+		};
+
+		postmask0: postmask@1400d000 {
+			compatible = "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+		};
+
+		dither0: dither@1400e000 {
+			compatible = "mediatek,mt8192-disp-dither",
+				     "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400e000 0 0x1000>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+		};
+
+		dsi0: dsi@14010000 {
+			compatible = "mediatek,mt8183-dsi";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI_DSI0>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			resets = <&mmsys MT8192_MMSYS_SW0_RST_B_DISP_DSI0>;
+			status = "disabled";
+
+			port {
+				dsi_out: endpoint { };
+			};
+		};
+
+		ovl_2l2: ovl@14014000 {
+			compatible = "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_OVL2_2L>;
+			iommus = <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2>,
+				 <&iommu0 M4U_PORT_L1_OVL_2L_RDMA2_HDR>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x4000 0x1000>;
+		};
+
+		rdma4: rdma@14015000 {
+			compatible = "mediatek,mt8192-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14015000 0 0x1000>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA4>;
+			iommus = <&iommu0 M4U_PORT_L1_DISP_RDMA4>;
+			mediatek,rdma-fifo-size = <2048>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+		};
+
+		dpi0: dpi@14016000 {
+			compatible = "mediatek,mt8192-dpi";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_DPI_DPI0>,
+				 <&mmsys CLK_MM_DISP_DPI0>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL>;
+			clock-names = "pixel", "engine", "pll";
+			status = "disabled";
+		};
+
+		iommu0: m4u@1401d000 {
+			compatible = "mediatek,mt8192-m4u";
+			reg = <0 0x1401d000 0 0x1000>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+					 <&larb4>, <&larb5>, <&larb7>,
+					 <&larb9>, <&larb11>, <&larb13>,
+					 <&larb14>, <&larb16>, <&larb17>,
+					 <&larb18>, <&larb19>, <&larb20>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&mmsys CLK_MM_SMI_IOMMU>;
+			clock-names = "bclk";
+			power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+			#iommu-cells = <1>;
+		};
+
+		imgsys: clock-controller@15020000 {
+			compatible = "mediatek,mt8192-imgsys";
+			reg = <0 0x15020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: larb@1502e000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1502e000 0 0x1000>;
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_ISP>;
+		};
+
+		imgsys2: clock-controller@15820000 {
+			compatible = "mediatek,mt8192-imgsys2";
+			reg = <0 0x15820000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: larb@1582e000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1582e000 0 0x1000>;
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&imgsys2 CLK_IMG2_LARB11>,
+				 <&imgsys2 CLK_IMG2_LARB11>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>;
+		};
+
+		vcodec_dec: video-codec@16000000 {
+			compatible = "mediatek,mt8192-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;
+			mediatek,scp = <&scp>;
+			iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0 0 0 0x16000000 0 0x26000>;
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0x0 0x10000 0 0x800>;
+				interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+					 <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+					 <&topckgen CLK_TOP_MAINPLL_D4>;
+				clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+				assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;
+				interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+					 <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+					 <&vdecsys CLK_VDEC_VDEC>,
+					 <&vdecsys CLK_VDEC_LAT>,
+					 <&vdecsys CLK_VDEC_LARB1>,
+					 <&topckgen CLK_TOP_MAINPLL_D4>;
+				clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+				assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+				power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+			};
+		};
+
+		larb5: larb@1600d000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1600d000 0 0x1000>;
+			mediatek,larb-id = <5>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+		};
+
+		vdecsys_soc: clock-controller@1600f000 {
+			compatible = "mediatek,mt8192-vdecsys_soc";
+			reg = <0 0x1600f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb4: larb@1602e000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1602e000 0 0x1000>;
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+		};
+
+		vdecsys: clock-controller@1602f000 {
+			compatible = "mediatek,mt8192-vdecsys";
+			reg = <0 0x1602f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@17000000 {
+			compatible = "mediatek,mt8192-vencsys";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: larb@17010000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC_SET0_LARB>,
+				 <&vencsys CLK_VENC_SET1_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
+		};
+
+		vcodec_enc: vcodec@17020000 {
+			compatible = "mediatek,mt8192-vcodec-enc";
+			reg = <0 0x17020000 0 0x2000>;
+			iommus = <&iommu0 M4U_PORT_L7_VENC_RCPU>,
+				 <&iommu0 M4U_PORT_L7_VENC_REC>,
+				 <&iommu0 M4U_PORT_L7_VENC_BSDMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_SV_COMV>,
+				 <&iommu0 M4U_PORT_L7_VENC_RD_COMV>,
+				 <&iommu0 M4U_PORT_L7_VENC_CUR_LUMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_CUR_CHROMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_REF_LUMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_REF_CHROMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_SUB_R_LUMA>,
+				 <&iommu0 M4U_PORT_L7_VENC_SUB_W_LUMA>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_SET1_VENC>;
+			clock-names = "venc-set1";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+		};
+
+		camsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8192-camsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: larb@1a001000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a001000 0 0x1000>;
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_CAM>,
+				 <&camsys CLK_CAM_LARB13>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: larb@1a002000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a002000 0 0x1000>;
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys CLK_CAM_CAM>,
+				 <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: larb@1a00f000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a00f000 0 0x1000>;
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys_rawa CLK_CAM_RAWA_CAM>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: larb@1a010000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys_rawb CLK_CAM_RAWB_CAM>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		larb18: larb@1a011000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1a011000 0 0x1000>;
+			mediatek,larb-id = <18>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>,
+				 <&camsys_rawc CLK_CAM_RAWC_CAM>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWC>;
+		};
+
+		camsys_rawa: clock-controller@1a04f000 {
+			compatible = "mediatek,mt8192-camsys_rawa";
+			reg = <0 0x1a04f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1a06f000 {
+			compatible = "mediatek,mt8192-camsys_rawb";
+			reg = <0 0x1a06f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawc: clock-controller@1a08f000 {
+			compatible = "mediatek,mt8192-camsys_rawc";
+			reg = <0 0x1a08f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		ipesys: clock-controller@1b000000 {
+			compatible = "mediatek,mt8192-ipesys";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb20: larb@1b00f000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1b00f000 0 0x1000>;
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&ipesys CLK_IPE_SMI_SUBCOM>,
+				 <&ipesys CLK_IPE_LARB20>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_IPE>;
+		};
+
+		larb19: larb@1b10f000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1b10f000 0 0x1000>;
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&ipesys CLK_IPE_SMI_SUBCOM>,
+				 <&ipesys CLK_IPE_LARB19>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_IPE>;
+		};
+
+		mdpsys: clock-controller@1f000000 {
+			compatible = "mediatek,mt8192-mdpsys";
+			reg = <0 0x1f000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@1f002000 {
+			compatible = "mediatek,mt8192-smi-larb";
+			reg = <0 0x1f002000 0 0x1000>;
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mdpsys CLK_MDP_SMI0>,
+				 <&mdpsys CLK_MDP_SMI0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
new file mode 100644
index 000000000..2d5e8f371
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "Acer Tomato (rev1) board";
+	compatible = "google,tomato-rev1", "google,tomato", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "mt8195_r1019_5682";
+};
+
+&ts_10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
new file mode 100644
index 000000000..2586c32ce
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "Acer Tomato (rev2) board";
+	compatible = "google,tomato-rev2", "google,tomato", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682i";
+	realtek,btndet-delay = <16>;
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>,
+			 <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down;
+	};
+
+	pins-low-power-pcie0-disable {
+		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
+			 <PINMUX_GPIO20__FUNC_GPIO20>,
+			 <PINMUX_GPIO21__FUNC_GPIO21>;
+		input-enable;
+		bias-pull-down;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "mt8195_r1019_5682";
+};
+
+&ts_10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
new file mode 100644
index 000000000..f54f9477b
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r3.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8195-cherry.dtsi"
+
+/ {
+	model = "Acer Tomato (rev3 - 4) board";
+	compatible = "google,tomato-rev4", "google,tomato-rev3",
+		     "google,tomato", "mediatek,mt8195";
+};
+
+&audio_codec {
+	compatible = "realtek,rt5682s";
+	realtek,amic-delay-ms = <250>;
+};
+
+&pio_default {
+	pins-low-power-hdmi-disable {
+		pinmux = <PINMUX_GPIO31__FUNC_GPIO31>,
+			 <PINMUX_GPIO32__FUNC_GPIO32>,
+			 <PINMUX_GPIO33__FUNC_GPIO33>,
+			 <PINMUX_GPIO34__FUNC_GPIO34>,
+			 <PINMUX_GPIO35__FUNC_GPIO35>;
+		input-enable;
+		bias-pull-down;
+	};
+
+	pins-low-power-pcie0-disable {
+		pinmux = <PINMUX_GPIO19__FUNC_GPIO19>,
+			 <PINMUX_GPIO20__FUNC_GPIO20>,
+			 <PINMUX_GPIO21__FUNC_GPIO21>;
+		input-enable;
+		bias-pull-down;
+	};
+};
+
+&sound {
+	compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+	model = "m8195_r1019_5682s";
+};
+
+&ts_10 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
new file mode 100644
index 000000000..3f508e5c1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -0,0 +1,1211 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/spmi/spmi.h>
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c7 = &i2c7;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	backlight_lcd0: backlight-lcd0 {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1023>;
+		default-brightness-level = <576>;
+		enable-gpios = <&pio 82 GPIO_ACTIVE_HIGH>;
+		num-interpolated-steps = <1023>;
+		pwms = <&disp_pwm0 0 500000>;
+		power-supply = <&ppvar_sys>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	/* system wide LDO 3.3V power rail */
+	pp3300_z5: regulator-pp3300-ldo-z5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ldo_z5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* separately switched 3.3V power rail */
+	pp3300_s3: regulator-pp3300-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_s3";
+		/* automatically sequenced by PMIC EXT_PMIC_EN2 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&pp3300_z2>;
+	};
+
+	/* system wide 3.3V power rail */
+	pp3300_z2: regulator-pp3300-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z2";
+		/* EN pin tied to pp4200_z2, which is controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide 4.2V power rail */
+	pp4200_z2: regulator-pp4200-z2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp4200_z2";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide switching 5.0V power rail */
+	pp5000_s5: regulator-pp5000-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_s5";
+		/* controlled by EC */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* system wide semi-regulated power rail from battery or USB */
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	usb_vbus: regulator-5v0-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		adsp_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0xd80000>;
+			no-map;
+		};
+
+		afe_mem: memory@60d80000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60d80000 0 0x100000>;
+			no-map;
+		};
+
+		adsp_device_mem: memory@60e80000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60e80000 0 0x280000>;
+			no-map;
+		};
+	};
+
+	spk_amplifier: rt1019p {
+		compatible = "realtek,rt1019p";
+		label = "rt1019p";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt1019p_pins_default>;
+		sdb-gpios = <&pio 100 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp {
+	status = "okay";
+
+	memory-region = <&adsp_device_mem>, <&adsp_mem>;
+};
+
+&afe {
+	status = "okay";
+
+	mediatek,etdm-in2-cowork-source = <2>;
+	mediatek,etdm-out2-cowork-source = <0>;
+	memory-region = <&afe_mem>;
+};
+
+&dp_intf0 {
+	status = "okay";
+
+	port {
+		dp_intf0_out: endpoint {
+			remote-endpoint = <&edp_in>;
+		};
+	};
+};
+
+&dp_intf1 {
+	status = "okay";
+
+	port {
+		dp_intf1_out: endpoint {
+			remote-endpoint = <&dptx_in>;
+		};
+	};
+};
+
+&edp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edptx_pins_default>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			edp_in: endpoint {
+				remote-endpoint = <&dp_intf0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			edp_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&disp_pwm0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pin_default>;
+};
+
+&dp_tx {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dptx_pin>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dptx_in: endpoint {
+				remote-endpoint = <&dp_intf1_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dptx_out: endpoint {
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&gic {
+	mediatek,broken-save-restore-fw;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&mt6315_7_vbuck1>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	i2c-scl-internal-delay-ns = <12500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupts-extended = <&pio 6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_pins>;
+		vcc-supply = <&pp3300_s3>;
+		wakeup-source;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	audio_codec: codec@1a {
+		/* Realtek RT5682i or RT5682s, sharing the same configuration */
+		reg = <0x1a>;
+		interrupts-extended = <&pio 89 IRQ_TYPE_EDGE_BOTH>;
+		realtek,jd-src = <1>;
+
+		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		MICVDD-supply = <&pp3300_z2>;
+		VBAT-supply = <&pp3300_z5>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+		interrupts-extended = <&pio 88 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cr50_int>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	ts_10: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x0001>;
+		interrupts-extended = <&pio 92 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		post-power-on-delay-ms = <10>;
+		vdd-supply = <&pp3300_s3>;
+		status = "disabled";
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+
+	pmic@34 {
+		#interrupt-cells = <2>;
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 130 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+		pinctrl-names = "default";
+		pinctrl-0 = <&subpmic_default>;
+		wakeup-source;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x14c11>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
+	max-frequency = <200000000>;
+	no-mmc;
+	no-sdio;
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>, <&mmc1_pins_detect>;
+	pinctrl-1 = <&mmc1_pins_default>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt_pmic_vmch_ldo_reg>;
+	vqmmc-supply = <&mt_pmic_vmc_ldo_reg>;
+};
+
+&mt6359codec {
+	mediatek,dmic-mode = <1>;  /* one-wire */
+	mediatek,mic-type-0 = <2>; /* DMIC */
+};
+
+/* for CPU-L */
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+/* for CORE */
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_sshub_buck_reg {
+	regulator-always-on;
+	regulator-min-microvolt = <550000>;
+	regulator-max-microvolt = <550000>;
+};
+
+/* for CORE SRAM */
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+	regulator-min-microvolt = <750000>;
+	regulator-max-microvolt = <750000>;
+};
+
+&mt6359_vufs_ldo_reg {
+	regulator-always-on;
+};
+
+&nor_flash {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+	};
+};
+
+&pcie1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins_default>;
+};
+
+&pio {
+	mediatek,rsel-resistance-in-si-unit;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pio_default>;
+
+	/* 144 lines */
+	gpio-line-names =
+		"I2S_SPKR_MCLK",
+		"I2S_SPKR_DATAIN",
+		"I2S_SPKR_LRCK",
+		"I2S_SPKR_BCLK",
+		"EC_AP_INT_ODL",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Schematics
+		 * call it AP_FLASH_WP_ODL.
+		 */
+		"AP_FLASH_WP_L",
+		"TCHPAD_INT_ODL",
+		"EDP_HPD_1V8",
+		"AP_I2C_CAM_SDA",
+		"AP_I2C_CAM_SCL",
+		"AP_I2C_TCHPAD_SDA_1V8",
+		"AP_I2C_TCHPAD_SCL_1V8",
+		"AP_I2C_AUD_SDA",
+		"AP_I2C_AUD_SCL",
+		"AP_I2C_TPM_SDA_1V8",
+		"AP_I2C_TPM_SCL_1V8",
+		"AP_I2C_TCHSCR_SDA_1V8",
+		"AP_I2C_TCHSCR_SCL_1V8",
+		"EC_AP_HPD_OD",
+		"",
+		"PCIE_NVME_RST_L",
+		"PCIE_NVME_CLKREQ_ODL",
+		"PCIE_RST_1V8_L",
+		"PCIE_CLKREQ_1V8_ODL",
+		"PCIE_WAKE_1V8_ODL",
+		"CLK_24M_CAM0",
+		"CAM1_SEN_EN",
+		"AP_I2C_PWR_SCL_1V8",
+		"AP_I2C_PWR_SDA_1V8",
+		"AP_I2C_MISC_SCL",
+		"AP_I2C_MISC_SDA",
+		"EN_PP5000_HDMI_X",
+		"AP_HDMITX_HTPLG",
+		"",
+		"AP_HDMITX_SCL_1V8",
+		"AP_HDMITX_SDA_1V8",
+		"AP_RTC_CLK32K",
+		"AP_EC_WATCHDOG_L",
+		"SRCLKENA0",
+		"SRCLKENA1",
+		"PWRAP_SPI0_CS_L",
+		"PWRAP_SPI0_CK",
+		"PWRAP_SPI0_MOSI",
+		"PWRAP_SPI0_MISO",
+		"SPMI_SCL",
+		"SPMI_SDA",
+		"",
+		"",
+		"",
+		"I2S_HP_DATAIN",
+		"I2S_HP_MCLK",
+		"I2S_HP_BCK",
+		"I2S_HP_LRCK",
+		"I2S_HP_DATAOUT",
+		"SD_CD_ODL",
+		"EN_PP3300_DISP_X",
+		"TCHSCR_RST_1V8_L",
+		"TCHSCR_REPORT_DISABLE",
+		"EN_PP3300_WLAN_X",
+		"BT_KILL_1V8_L",
+		"I2S_SPKR_DATAOUT",
+		"WIFI_KILL_1V8_L",
+		"BEEP_ON",
+		"SCP_I2C_SENSOR_SCL_1V8",
+		"SCP_I2C_SENSOR_SDA_1V8",
+		"",
+		"",
+		"",
+		"",
+		"AUD_CLK_MOSI",
+		"AUD_SYNC_MOSI",
+		"AUD_DAT_MOSI0",
+		"AUD_DAT_MOSI1",
+		"AUD_DAT_MISO0",
+		"AUD_DAT_MISO1",
+		"AUD_DAT_MISO2",
+		"SCP_VREQ_VAO",
+		"AP_SPI_GSC_TPM_CLK",
+		"AP_SPI_GSC_TPM_MOSI",
+		"AP_SPI_GSC_TPM_CS_L",
+		"AP_SPI_GSC_TPM_MISO",
+		"EN_PP1000_CAM_X",
+		"AP_EDP_BKLTEN",
+		"",
+		"USB3_HUB_RST_L",
+		"",
+		"WLAN_ALERT_ODL",
+		"EC_IN_RW_ODL",
+		"GSC_AP_INT_ODL",
+		"HP_INT_ODL",
+		"CAM0_RST_L",
+		"CAM1_RST_L",
+		"TCHSCR_INT_1V8_L",
+		"CAM1_DET_L",
+		"RST_ALC1011_L",
+		"",
+		"",
+		"BL_PWM_1V8",
+		"UART_AP_TX_DBG_RX",
+		"UART_DBG_TX_AP_RX",
+		"EN_SPKR",
+		"AP_EC_WARM_RST_REQ",
+		"UART_SCP_TX_DBGCON_RX",
+		"UART_DBGCON_TX_SCP_RX",
+		"",
+		"",
+		"KPCOL0",
+		"",
+		"MT6315_GPU_INT",
+		"MT6315_PROC_BC_INT",
+		"SD_CMD",
+		"SD_CLK",
+		"SD_DAT0",
+		"SD_DAT1",
+		"SD_DAT2",
+		"SD_DAT3",
+		"EMMC_DAT7",
+		"EMMC_DAT6",
+		"EMMC_DAT5",
+		"EMMC_DAT4",
+		"EMMC_RSTB",
+		"EMMC_CMD",
+		"EMMC_CLK",
+		"EMMC_DAT3",
+		"EMMC_DAT2",
+		"EMMC_DAT1",
+		"EMMC_DAT0",
+		"EMMC_DSL",
+		"",
+		"",
+		"MT6360_INT_ODL",
+		"SCP_JTAG0_TRSTN",
+		"AP_SPI_EC_CS_L",
+		"AP_SPI_EC_CLK",
+		"AP_SPI_EC_MOSI",
+		"AP_SPI_EC_MISO",
+		"SCP_JTAG0_TMS",
+		"SCP_JTAG0_TCK",
+		"SCP_JTAG0_TDO",
+		"SCP_JTAG0_TDI",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_CLK",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_MISO";
+
+	aud_pins_default: audio-default-pins {
+		pins-cmd-dat {
+		    pinmux = <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
+			     <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
+			     <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
+			     <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
+			     <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
+			     <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
+			     <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>,
+			     <PINMUX_GPIO0__FUNC_TDMIN_MCK>,
+			     <PINMUX_GPIO1__FUNC_TDMIN_DI>,
+			     <PINMUX_GPIO2__FUNC_TDMIN_LRCK>,
+			     <PINMUX_GPIO3__FUNC_TDMIN_BCK>,
+			     <PINMUX_GPIO60__FUNC_I2SO2_D0>,
+			     <PINMUX_GPIO49__FUNC_I2SIN_D0>,
+			     <PINMUX_GPIO50__FUNC_I2SO1_MCK>,
+			     <PINMUX_GPIO51__FUNC_I2SO1_BCK>,
+			     <PINMUX_GPIO52__FUNC_I2SO1_WS>,
+			     <PINMUX_GPIO53__FUNC_I2SO1_D0>;
+		};
+
+		pins-hp-jack-int-odl {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	cr50_int: cr50-irq-default-pins {
+		pins-gsc-ap-int-odl {
+			pinmux = <PINMUX_GPIO88__FUNC_GPIO88>;
+			input-enable;
+		};
+	};
+
+	cros_ec_int: cros-ec-irq-default-pins {
+		pins-ec-ap-int-odl {
+			pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			input-enable;
+		};
+	};
+
+	edptx_pins_default: edptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	disp_pwm0_pin_default: disp-pwm0-default-pins {
+		pins-disp-pwm {
+			pinmux = <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO97__FUNC_DISP_PWM0>;
+		};
+	};
+
+	dptx_pin: dptx-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
+			bias-pull-up;
+		};
+	};
+
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <1000>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
+				 <PINMUX_GPIO13__FUNC_SCL2>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO14__FUNC_SDA3>,
+				 <PINMUX_GPIO15__FUNC_SCL3>;
+			bias-pull-up = <1000>;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c4_pins: i2c4-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <1000>;
+			drive-strength = <4>;
+		};
+	};
+
+	i2c5_pins: i2c5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO29__FUNC_SCL5>,
+				 <PINMUX_GPIO30__FUNC_SDA5>;
+			bias-disable;
+			drive-strength-microamp = <1000>;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
+				 <PINMUX_GPIO28__FUNC_SDA7>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <6>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_detect: mmc1-detect-pins {
+		pins-insert {
+			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <8>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	nor_pins_default: nor-default-pins {
+		pins-ck-io {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			drive-strength = <6>;
+			bias-pull-down;
+		};
+
+		pins-cs {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>;
+			drive-strength = <6>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
+				 <PINMUX_GPIO20__FUNC_PERSTN>,
+				 <PINMUX_GPIO21__FUNC_CLKREQN>;
+				 bias-pull-up;
+		};
+	};
+
+	pcie1_pins_default: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
+				 bias-pull-up;
+		};
+	};
+
+	pio_default: pio-default-pins {
+		pins-wifi-enable {
+			pinmux = <PINMUX_GPIO58__FUNC_GPIO58>;
+			output-high;
+			drive-strength = <14>;
+		};
+
+		pins-low-power-pd {
+			pinmux = <PINMUX_GPIO25__FUNC_GPIO25>,
+				 <PINMUX_GPIO26__FUNC_GPIO26>,
+				 <PINMUX_GPIO46__FUNC_GPIO46>,
+				 <PINMUX_GPIO47__FUNC_GPIO47>,
+				 <PINMUX_GPIO48__FUNC_GPIO48>,
+				 <PINMUX_GPIO65__FUNC_GPIO65>,
+				 <PINMUX_GPIO66__FUNC_GPIO66>,
+				 <PINMUX_GPIO67__FUNC_GPIO67>,
+				 <PINMUX_GPIO68__FUNC_GPIO68>,
+				 <PINMUX_GPIO128__FUNC_GPIO128>,
+				 <PINMUX_GPIO129__FUNC_GPIO129>;
+			input-enable;
+			bias-pull-down;
+		};
+
+		pins-low-power-pupd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>,
+				 <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO93__FUNC_GPIO93>,
+				 <PINMUX_GPIO94__FUNC_GPIO94>,
+				 <PINMUX_GPIO95__FUNC_GPIO95>,
+				 <PINMUX_GPIO96__FUNC_GPIO96>,
+				 <PINMUX_GPIO104__FUNC_GPIO104>,
+				 <PINMUX_GPIO105__FUNC_GPIO105>,
+				 <PINMUX_GPIO107__FUNC_GPIO107>;
+			input-enable;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	rt1019p_pins_default: rt1019p-default-pins {
+		pins-amp-sdb {
+			pinmux = <PINMUX_GPIO100__FUNC_GPIO100>;
+			output-low;
+		};
+	};
+
+	scp_pins: scp-default-pins {
+		pins-vreq {
+			pinmux = <PINMUX_GPIO76__FUNC_SCP_VREQ_VAO>;
+			bias-disable;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+				 <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+				 <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+			bias-pull-down;
+		};
+	};
+
+	subpmic_default: subpmic-default-pins {
+		subpmic_pin_irq: pins-subpmic-int-n {
+			pinmux = <PINMUX_GPIO130__FUNC_GPIO130>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	trackpad_pins: trackpad-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	touchscreen_pins: touchscreen-default-pins {
+		pins-int-n {
+			pinmux = <PINMUX_GPIO92__FUNC_GPIO92>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+		pins-rst {
+			pinmux = <PINMUX_GPIO56__FUNC_GPIO56>;
+			output-high;
+		};
+		pins-report-sw {
+			pinmux = <PINMUX_GPIO57__FUNC_GPIO57>;
+			output-low;
+		};
+	};
+};
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&scp {
+	status = "okay";
+
+	firmware-name = "mediatek/mt8195/scp.img";
+	memory-region = <&scp_mem>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+
+	cros-ec-rpmsg {
+		compatible = "google,cros-ec-rpmsg";
+		mediatek,rpmsg-name = "cros-ec-rpmsg";
+	};
+};
+
+&sound {
+	status = "okay";
+
+	mediatek,adsp = <&adsp>;
+	mediatek,dai-link =
+		"DL10_FE", "DPTX_BE", "ETDM1_IN_BE", "ETDM2_IN_BE",
+		"ETDM1_OUT_BE", "ETDM2_OUT_BE","UL_SRC1_BE",
+		"AFE_SOF_DL2", "AFE_SOF_DL3", "AFE_SOF_UL4", "AFE_SOF_UL5";
+	pinctrl-names = "default";
+	pinctrl-0 = <&aud_pins_default>;
+};
+
+&spi0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+
+	cros_ec: ec@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupts-extended = <&pio 4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cros_ec_int>;
+		spi-max-frequency = <3000000>;
+
+		keyboard-backlight {
+			compatible = "google,cros-kbd-led-backlight";
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mt_pmic_vmc_ldo_reg: regulator@0 {
+			compatible = "google,cros-ec-regulator";
+			reg = <0>;
+			regulator-name = "mt_pmic_vmc_ldo";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		mt_pmic_vmch_ldo_reg: regulator@1 {
+			compatible = "google,cros-ec-regulator";
+			reg = <1>;
+			regulator-name = "mt_pmic_vmch_ldo";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+&spmi {
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	mt6315@6 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x6 SPMI_USID>;
+
+		regulators {
+			mt6315_6_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vbcpu";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mt6315@7 {
+		compatible = "mediatek,mt6315-regulator";
+		reg = <0x7 SPMI_USID>;
+
+		regulators {
+			mt6315_7_vbuck1: vbuck1 {
+				regulator-compatible = "vbuck1";
+				regulator-name = "Vgpu";
+				regulator-min-microvolt = <625000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-enable-ramp-delay = <256>;
+				regulator-ramp-delay = <6250>;
+				regulator-allowed-modes = <0 1 2>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+&xhci1 {
+	status = "okay";
+
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+&xhci2 {
+	status = "okay";
+
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+&xhci3 {
+	status = "okay";
+
+	/* MT7921's USB Bluetooth has issues with USB2 LPM */
+	usb2-lpm-disable;
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&usb_vbus>;
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
new file mode 100644
index 000000000..5d635085f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+
+/ {
+	model = "MediaTek MT8195 demo board";
+	compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+
+		key-0 {
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0x2 0x00000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+
+		scp_mem: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x2900000>;
+			no-map;
+		};
+
+		vpu_mem: memory@53000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_mem: memory@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		snd_dma_mem: memory@60000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x60000000 0 0x1100000>;
+			no-map;
+		};
+
+		apu_mem: memory@62000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
+		};
+	};
+};
+
+&eth {
+	phy-mode ="rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 80000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	status = "okay";
+
+	mdio {
+		ethernet_phy0: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mt6360: pmic@34 {
+		compatible = "mediatek,mt6360";
+		reg = <0x34>;
+		interrupt-controller;
+		interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "IRQB";
+
+		charger {
+			compatible = "mediatek,mt6360-chg";
+			richtek,vinovp-microvolt = <14500000>;
+
+			otg_vbus_regulator: usb-otg-vbus-regulator {
+				regulator-compatible = "usb-otg-vbus";
+				regulator-name = "usb-otg-vbus";
+				regulator-min-microvolt = <4425000>;
+				regulator-max-microvolt = <5825000>;
+			};
+		};
+
+		regulator {
+			compatible = "mediatek,mt6360-regulator";
+			LDO_VIN3-supply = <&mt6360_buck2>;
+
+			mt6360_buck1: buck1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "mt6360,buck1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_buck2: buck2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "mt6360,buck2";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP
+							   MT6360_OPMODE_ULP>;
+				regulator-always-on;
+			};
+
+			mt6360_ldo1: ldo1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "mt6360,ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo2: ldo2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "mt6360,ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo3: ldo3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "mt6360,ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo5: ldo5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "mt6360,ldo5";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo6: ldo6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "mt6360,ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+			};
+
+			mt6360_ldo7: ldo7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "mt6360,ldo7";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+							   MT6360_OPMODE_LP>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x14c11>;
+	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6360_ldo5>;
+	vqmmc-supply = <&mt6360_ldo3>;
+	status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+	regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+	regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+	regulator-always-on;
+};
+
+&pio {
+	eth_default_pins: eth-default-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
+				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
+				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
+				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
+				 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
+				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
+				 <PINMUX_GPIO86__FUNC_GBE_RXC>;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
+				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
+				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
+				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
+				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
+			input-enable;
+		};
+		pins-power {
+			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
+				 <PINMUX_GPIO92__FUNC_GPIO92>;
+			output-high;
+		};
+	};
+
+	eth_sleep_pins: eth-sleep-pins {
+		pins-txd {
+			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
+				 <PINMUX_GPIO78__FUNC_GPIO78>,
+				 <PINMUX_GPIO79__FUNC_GPIO79>,
+				 <PINMUX_GPIO80__FUNC_GPIO80>;
+		};
+		pins-cc {
+			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
+				 <PINMUX_GPIO88__FUNC_GPIO88>,
+				 <PINMUX_GPIO87__FUNC_GPIO87>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>;
+		};
+		pins-rxd {
+			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
+				 <PINMUX_GPIO82__FUNC_GPIO82>,
+				 <PINMUX_GPIO83__FUNC_GPIO83>,
+				 <PINMUX_GPIO84__FUNC_GPIO84>;
+		};
+		pins-mdio {
+			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
+				 <PINMUX_GPIO90__FUNC_GPIO90>;
+			input-disable;
+			bias-disable;
+		};
+	};
+
+	gpio_keys_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			input-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-insert {
+			pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+				 <PINMUX_GPIO103__FUNC_URXD1>;
+		};
+	};
+};
+
+
+&pmic {
+	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&xhci0 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	vbus-supply = <&otg_vbus_regulator>;
+	status = "okay";
+};
+
+&xhci1 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci2 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
+
+&xhci3 {
+	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
new file mode 100644
index 000000000..690dc7717
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8195.dtsi"
+
+/ {
+	model = "MediaTek MT8195 evaluation board";
+	compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pin>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pin>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pin>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pin>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&nor_flash {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nor_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&pio {
+	i2c0_pin: i2c0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+				 <PINMUX_GPIO9__FUNC_SCL0>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			mediatek,drive-strength-adv = <0>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c1_pin: i2c1-pins {
+		pins {
+			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+				 <PINMUX_GPIO11__FUNC_SCL1>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			mediatek,drive-strength-adv = <0>;
+			drive-strength = <6>;
+		};
+	};
+
+	i2c4_pin: i2c4-pins {
+		pins {
+			pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+				 <PINMUX_GPIO17__FUNC_SCL4>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+			mediatek,drive-strength-adv = <7>;
+		};
+	};
+
+	i2c6_pin: i2c6-pins {
+		pins {
+			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+				 <PINMUX_GPIO26__FUNC_SCL6>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	i2c7_pin: i2c7-pins {
+		pins {
+			pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
+				 <PINMUX_GPIO28__FUNC_SDA7>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	nor_pins_default: nor-pins {
+		pins0 {
+			pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+				 <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+				 <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+			bias-pull-down;
+		};
+
+		pins1 {
+			pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>,
+				 <PINMUX_GPIO130__FUNC_SPINOR_IO2>,
+				 <PINMUX_GPIO131__FUNC_SPINOR_IO3>;
+			bias-pull-up;
+		};
+	};
+
+	uart0_pin: uart0-pins {
+		pins {
+			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+				 <PINMUX_GPIO99__FUNC_URXD0>;
+		};
+	};
+};
+
+&u3phy0 {
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
+
+&u3phy2 {
+	status = "okay";
+};
+
+&u3phy3 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pin>;
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&xhci2 {
+	status = "okay";
+};
+
+&xhci3 {
+	/* This controller is connected with a BT device.
+	 * Disable usb2 lpm to prevent known issues.
+	 */
+	usb2-lpm-disable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
new file mode 100644
index 000000000..6708c4d21
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -0,0 +1,3533 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mt8195-clk.h>
+#include <dt-bindings/gce/mt8195-gce.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8195-memory-port.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/power/mt8195-power.h>
+#include <dt-bindings/reset/mt8195-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
+
+/ {
+	compatible = "mediatek,mt8195";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		dp-intf0 = &dp_intf0;
+		dp-intf1 = &dp_intf1;
+		gce0 = &gce0;
+		gce1 = &gce1;
+		ethdr0 = &ethdr0;
+		mutex0 = &mutex;
+		mutex1 = &mutex1;
+		merge1 = &merge1;
+		merge2 = &merge2;
+		merge3 = &merge3;
+		merge4 = &merge4;
+		merge5 = &merge5;
+		vdo1-rdma0 = &vdo1_rdma0;
+		vdo1-rdma1 = &vdo1_rdma1;
+		vdo1-rdma2 = &vdo1_rdma2;
+		vdo1-rdma3 = &vdo1_rdma3;
+		vdo1-rdma4 = &vdo1_rdma4;
+		vdo1-rdma5 = &vdo1_rdma5;
+		vdo1-rdma6 = &vdo1_rdma6;
+		vdo1-rdma7 = &vdo1_rdma7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x000>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			performance-domains = <&performance 0>;
+			clock-frequency = <1701000000>;
+			capacity-dmips-mhz = <308>;
+			cpu-idle-states = <&cpu_ret_l &cpu_off_l>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x400>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x500>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x600>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x700>;
+			enable-method = "psci";
+			performance-domains = <&performance 1>;
+			clock-frequency = <2171000000>;
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&cpu_ret_b &cpu_off_b>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+
+				core4 {
+					cpu = <&cpu4>;
+				};
+
+				core5 {
+					cpu = <&cpu5>;
+				};
+
+				core6 {
+					cpu = <&cpu6>;
+				};
+
+				core7 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_ret_l: cpu-retention-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <95>;
+				min-residency-us = <580>;
+			};
+
+			cpu_ret_b: cpu-retention-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x00010001>;
+				local-timer-stop;
+				entry-latency-us = <45>;
+				exit-latency-us = <140>;
+				min-residency-us = <740>;
+			};
+
+			cpu_off_l: cpu-off-l {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <55>;
+				exit-latency-us = <155>;
+				min-residency-us = <840>;
+			};
+
+			cpu_off_b: cpu-off-b {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x01010002>;
+				local-timer-stop;
+				entry-latency-us = <50>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			next-level-cache = <&l3_0>;
+			cache-unified;
+		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-unified;
+		};
+	};
+
+	dsu-pmu {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+		       <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+		status = "fail";
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <2>;
+		wakeup-delay-ms = <50>;
+	};
+
+	sound: mt8195-sound {
+		mediatek,platform = <&afe>;
+		status = "disabled";
+	};
+
+	clk13m: fixed-factor-clock-13m {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clk26m>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "clk13m";
+	};
+
+	clk26m: oscillator-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: oscillator-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	performance: performance-controller@11bc10 {
+		compatible = "mediatek,cpufreq-hw";
+		reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+		#performance-domain-cells = <1>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-390000000 {
+			opp-hz = /bits/ 64 <390000000>;
+			opp-microvolt = <625000>;
+		};
+		opp-410000000 {
+			opp-hz = /bits/ 64 <410000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-431000000 {
+			opp-hz = /bits/ 64 <431000000>;
+			opp-microvolt = <631250>;
+		};
+		opp-473000000 {
+			opp-hz = /bits/ 64 <473000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-515000000 {
+			opp-hz = /bits/ 64 <515000000>;
+			opp-microvolt = <637500>;
+		};
+		opp-556000000 {
+			opp-hz = /bits/ 64 <556000000>;
+			opp-microvolt = <643750>;
+		};
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-640000000 {
+			opp-hz = /bits/ 64 <640000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-670000000 {
+			opp-hz = /bits/ 64 <670000000>;
+			opp-microvolt = <662500>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <675000>;
+		};
+		opp-730000000 {
+			opp-hz = /bits/ 64 <730000000>;
+			opp-microvolt = <687500>;
+		};
+		opp-760000000 {
+			opp-hz = /bits/ 64 <760000000>;
+			opp-microvolt = <700000>;
+		};
+		opp-790000000 {
+			opp-hz = /bits/ 64 <790000000>;
+			opp-microvolt = <712500>;
+		};
+		opp-820000000 {
+			opp-hz = /bits/ 64 <820000000>;
+			opp-microvolt = <725000>;
+		};
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <737500>;
+		};
+		opp-880000000 {
+			opp-hz = /bits/ 64 <880000000>;
+			opp-microvolt = <750000>;
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+	};
+
+	pmu-a78 {
+		compatible = "arm,cortex-a78-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			#redistributor-regions = <1>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c040000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8195-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg_ao: syscon@10001000 {
+			compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8195-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8195-pinctrl";
+			reg = <0 0x10005000 0 0x1000>,
+			      <0 0x11d10000 0 0x1000>,
+			      <0 0x11d30000 0 0x1000>,
+			      <0 0x11d40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11eb0000 0 0x1000>,
+			      <0 0x11f40000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+				    "iocfg_br", "iocfg_lm", "iocfg_rb",
+				    "iocfg_tl", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 144>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+			#interrupt-cells = <2>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8195-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				mfg0: power-domain@MT8195_POWER_DOMAIN_MFG0 {
+					reg = <MT8195_POWER_DOMAIN_MFG0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_MFG1 {
+						reg = <MT8195_POWER_DOMAIN_MFG1>;
+						clocks = <&apmixedsys CLK_APMIXED_MFGPLL>,
+							 <&topckgen CLK_TOP_MFG_CORE_TMP>;
+						clock-names = "mfg", "alt";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8195_POWER_DOMAIN_MFG2 {
+							reg = <MT8195_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG3 {
+							reg = <MT8195_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG4 {
+							reg = <MT8195_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG5 {
+							reg = <MT8195_POWER_DOMAIN_MFG5>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_MFG6 {
+							reg = <MT8195_POWER_DOMAIN_MFG6>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_VPPSYS0 {
+					reg = <MT8195_POWER_DOMAIN_VPPSYS0>;
+					clocks = <&topckgen CLK_TOP_VPP>,
+						 <&topckgen CLK_TOP_CAM>,
+						 <&topckgen CLK_TOP_CCU>,
+						 <&topckgen CLK_TOP_IMG>,
+						 <&topckgen CLK_TOP_VENC>,
+						 <&topckgen CLK_TOP_VDEC>,
+						 <&topckgen CLK_TOP_WPE_VPP>,
+						 <&topckgen CLK_TOP_CFG_VPP0>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VENCSYS_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_INFRA>,
+						 <&vppsys0 CLK_VPP0_GALS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>,
+						 <&vppsys0 CLK_VPP0_SMI_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_IOMMU>,
+						 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>,
+						 <&vppsys0 CLK_VPP0_GALS_EMI0_EMI1>,
+						 <&vppsys0 CLK_VPP0_SMI_SUB_COMMON_REORDER>,
+						 <&vppsys0 CLK_VPP0_SMI_RSI>,
+						 <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+						 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+						 <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+						 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+					clock-names = "vppsys", "vppsys1", "vppsys2", "vppsys3",
+						      "vppsys4", "vppsys5", "vppsys6", "vppsys7",
+						      "vppsys0-0", "vppsys0-1", "vppsys0-2", "vppsys0-3",
+						      "vppsys0-4", "vppsys0-5", "vppsys0-6", "vppsys0-7",
+						      "vppsys0-8", "vppsys0-9", "vppsys0-10", "vppsys0-11",
+						      "vppsys0-12", "vppsys0-13", "vppsys0-14",
+						      "vppsys0-15", "vppsys0-16", "vppsys0-17",
+						      "vppsys0-18";
+					mediatek,infracfg = <&infracfg_ao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_VDEC1 {
+						reg = <MT8195_POWER_DOMAIN_VDEC1>;
+						clocks = <&vdecsys CLK_VDEC_LARB1>;
+						clock-names = "vdec1-0";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8195_POWER_DOMAIN_VENC_CORE1 {
+						reg = <MT8195_POWER_DOMAIN_VENC_CORE1>;
+						clocks = <&vencsys_core1 CLK_VENC_CORE1_LARB>;
+						clock-names = "venc1-larb";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8195_POWER_DOMAIN_VDOSYS0 {
+						reg = <MT8195_POWER_DOMAIN_VDOSYS0>;
+						clocks = <&topckgen CLK_TOP_CFG_VDO0>,
+							 <&vdosys0 CLK_VDO0_SMI_GALS>,
+							 <&vdosys0 CLK_VDO0_SMI_COMMON>,
+							 <&vdosys0 CLK_VDO0_SMI_EMI>,
+							 <&vdosys0 CLK_VDO0_SMI_IOMMU>,
+							 <&vdosys0 CLK_VDO0_SMI_LARB>,
+							 <&vdosys0 CLK_VDO0_SMI_RSI>;
+						clock-names = "vdosys0", "vdosys0-0", "vdosys0-1",
+							      "vdosys0-2", "vdosys0-3",
+							      "vdosys0-4", "vdosys0-5";
+						mediatek,infracfg = <&infracfg_ao>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8195_POWER_DOMAIN_VPPSYS1 {
+							reg = <MT8195_POWER_DOMAIN_VPPSYS1>;
+							clocks = <&topckgen CLK_TOP_CFG_VPP1>,
+								 <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+								 <&vppsys1 CLK_VPP1_VPPSYS1_LARB>;
+							clock-names = "vppsys1", "vppsys1-0",
+								      "vppsys1-1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_WPESYS {
+							reg = <MT8195_POWER_DOMAIN_WPESYS>;
+							clocks = <&wpesys CLK_WPE_SMI_LARB7>,
+								 <&wpesys CLK_WPE_SMI_LARB8>,
+								 <&wpesys CLK_WPE_SMI_LARB7_P>,
+								 <&wpesys CLK_WPE_SMI_LARB8_P>;
+							clock-names = "wepsys-0", "wepsys-1", "wepsys-2",
+								      "wepsys-3";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDEC0 {
+							reg = <MT8195_POWER_DOMAIN_VDEC0>;
+							clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+							clock-names = "vdec0-0";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDEC2 {
+							reg = <MT8195_POWER_DOMAIN_VDEC2>;
+							clocks = <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+							clock-names = "vdec2-0";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VENC {
+							reg = <MT8195_POWER_DOMAIN_VENC>;
+							clocks = <&vencsys CLK_VENC_LARB>;
+							clock-names = "venc0-larb";
+							mediatek,infracfg = <&infracfg_ao>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_VDOSYS1 {
+							reg = <MT8195_POWER_DOMAIN_VDOSYS1>;
+							clocks = <&topckgen CLK_TOP_CFG_VDO1>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+								 <&vdosys1 CLK_VDO1_SMI_LARB3>,
+								 <&vdosys1 CLK_VDO1_GALS>;
+							clock-names = "vdosys1", "vdosys1-0",
+								      "vdosys1-1", "vdosys1-2";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_DP_TX {
+								reg = <MT8195_POWER_DOMAIN_DP_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_EPD_TX {
+								reg = <MT8195_POWER_DOMAIN_EPD_TX>;
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_HDMI_TX {
+								reg = <MT8195_POWER_DOMAIN_HDMI_TX>;
+								clocks = <&topckgen CLK_TOP_HDMI_APB>;
+								clock-names = "hdmi_tx";
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_IMG {
+							reg = <MT8195_POWER_DOMAIN_IMG>;
+							clocks = <&imgsys CLK_IMG_LARB9>,
+								 <&imgsys CLK_IMG_GALS>;
+							clock-names = "img-0", "img-1";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_DIP {
+								reg = <MT8195_POWER_DOMAIN_DIP>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_IPE {
+								reg = <MT8195_POWER_DOMAIN_IPE>;
+								clocks = <&topckgen CLK_TOP_IPE>,
+									 <&imgsys CLK_IMG_IPE>,
+									 <&ipesys CLK_IPE_SMI_LARB12>;
+								clock-names = "ipe", "ipe-0", "ipe-1";
+								mediatek,infracfg = <&infracfg_ao>;
+								#power-domain-cells = <0>;
+							};
+						};
+
+						power-domain@MT8195_POWER_DOMAIN_CAM {
+							reg = <MT8195_POWER_DOMAIN_CAM>;
+							clocks = <&camsys CLK_CAM_LARB13>,
+								 <&camsys CLK_CAM_LARB14>,
+								 <&camsys CLK_CAM_CAM2MM0_GALS>,
+								 <&camsys CLK_CAM_CAM2MM1_GALS>,
+								 <&camsys CLK_CAM_CAM2SYS_GALS>;
+							clock-names = "cam-0", "cam-1", "cam-2", "cam-3",
+								      "cam-4";
+							mediatek,infracfg = <&infracfg_ao>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#power-domain-cells = <1>;
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_RAWA {
+								reg = <MT8195_POWER_DOMAIN_CAM_RAWA>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_RAWB {
+								reg = <MT8195_POWER_DOMAIN_CAM_RAWB>;
+								#power-domain-cells = <0>;
+							};
+
+							power-domain@MT8195_POWER_DOMAIN_CAM_MRAW {
+								reg = <MT8195_POWER_DOMAIN_CAM_MRAW>;
+								#power-domain-cells = <0>;
+							};
+						};
+					};
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P0 {
+					reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_MAC_P1 {
+					reg = <MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+					reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+					reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_CSI_RX_TOP {
+					reg = <MT8195_POWER_DOMAIN_CSI_RX_TOP>;
+					clocks = <&topckgen CLK_TOP_SENINF>,
+						 <&topckgen CLK_TOP_SENINF2>;
+					clock-names = "csi_rx_top", "csi_rx_top1";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_ETHER {
+					reg = <MT8195_POWER_DOMAIN_ETHER>;
+					clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+					clock-names = "ether";
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8195_POWER_DOMAIN_ADSP {
+					reg = <MT8195_POWER_DOMAIN_ADSP>;
+					clocks = <&topckgen CLK_TOP_ADSP>,
+						 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>;
+					clock-names = "adsp", "adsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					mediatek,infracfg = <&infracfg_ao>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8195_POWER_DOMAIN_AUDIO {
+						reg = <MT8195_POWER_DOMAIN_AUDIO>;
+						clocks = <&topckgen CLK_TOP_A1SYS_HP>,
+							 <&topckgen CLK_TOP_AUD_INTBUS>,
+							 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+							 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>;
+						clock-names = "audio", "audio1", "audio2",
+							      "audio3";
+						mediatek,infracfg = <&infracfg_ao>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8195-wdt";
+			mediatek,disable-extrst;
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8195-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		systimer: timer@10017000 {
+			compatible = "mediatek,mt8195-timer",
+				     "mediatek,mt6765-timer";
+			reg = <0 0x10017000 0 0x1000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk13m>;
+		};
+
+		pwrap: pwrap@10024000 {
+			compatible = "mediatek,mt8195-pwrap", "syscon";
+			reg = <0 0x10024000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+			clock-names = "spi", "wrap";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+		};
+
+		spmi: spmi@10027000 {
+			compatible = "mediatek,mt8195-spmi";
+			reg = <0 0x10027000 0 0x000e00>,
+			      <0 0x10029000 0 0x000100>;
+			reg-names = "pmif", "spmimst";
+			clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+				 <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>,
+				 <&topckgen CLK_TOP_SPMI_M_MST>;
+			clock-names = "pmif_sys_ck",
+				      "pmif_tmr_ck",
+				      "spmimst_clk_mux";
+			assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+		};
+
+		iommu_infra: infra-iommu@10315000 {
+			compatible = "mediatek,mt8195-iommu-infra";
+			reg = <0 0x10315000 0 0x5000>;
+			interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+		};
+
+		gce0: mailbox@10320000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+		};
+
+		gce1: mailbox@10330000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+		};
+
+		scp: scp@10500000 {
+			compatible = "mediatek,mt8195-scp";
+			reg = <0 0x10500000 0 0x100000>,
+			      <0 0x10720000 0 0xe0000>,
+			      <0 0x10700000 0 0x8000>;
+			reg-names = "sram", "cfg", "l1tcm";
+			interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		scp_adsp: clock-controller@10720000 {
+			compatible = "mediatek,mt8195-scp_adsp";
+			reg = <0 0x10720000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		adsp: dsp@10803000 {
+			compatible = "mediatek,mt8195-dsp";
+			reg = <0 0x10803000 0 0x1000>,
+			      <0 0x10840000 0 0x40000>;
+			reg-names = "cfg", "sram";
+			clocks = <&topckgen CLK_TOP_ADSP>,
+				 <&clk26m>,
+				 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				 <&topckgen CLK_TOP_MAINPLL_D7_D2>,
+				 <&scp_adsp CLK_SCP_ADSP_AUDIODSP>,
+				 <&topckgen CLK_TOP_AUDIO_H>;
+			clock-names = "adsp_sel",
+				 "clk26m_ck",
+				 "audio_local_bus",
+				 "mainpll_d7_d2",
+				 "scp_adsp_audiodsp",
+				 "audio_h";
+			power-domains = <&spm MT8195_POWER_DOMAIN_ADSP>;
+			mbox-names = "rx", "tx";
+			mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+			status = "disabled";
+		};
+
+		adsp_mailbox0: mailbox@10816000 {
+			compatible = "mediatek,mt8195-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10816000 0 0x1000>;
+			interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		adsp_mailbox1: mailbox@10817000 {
+			compatible = "mediatek,mt8195-adsp-mbox";
+			#mbox-cells = <0>;
+			reg = <0 0x10817000 0 0x1000>;
+			interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		afe: mt8195-afe-pcm@10890000 {
+			compatible = "mediatek,mt8195-audio";
+			reg = <0 0x10890000 0 0x10000>;
+			mediatek,topckgen = <&topckgen>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>;
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&watchdog 14>;
+			reset-names = "audiosys";
+			clocks = <&clk26m>,
+				<&apmixedsys CLK_APMIXED_APLL1>,
+				<&apmixedsys CLK_APMIXED_APLL2>,
+				<&topckgen CLK_TOP_APLL12_DIV0>,
+				<&topckgen CLK_TOP_APLL12_DIV1>,
+				<&topckgen CLK_TOP_APLL12_DIV2>,
+				<&topckgen CLK_TOP_APLL12_DIV3>,
+				<&topckgen CLK_TOP_APLL12_DIV9>,
+				<&topckgen CLK_TOP_A1SYS_HP>,
+				<&topckgen CLK_TOP_AUD_INTBUS>,
+				<&topckgen CLK_TOP_AUDIO_H>,
+				<&topckgen CLK_TOP_AUDIO_LOCAL_BUS>,
+				<&topckgen CLK_TOP_DPTX_MCK>,
+				<&topckgen CLK_TOP_I2SO1_MCK>,
+				<&topckgen CLK_TOP_I2SO2_MCK>,
+				<&topckgen CLK_TOP_I2SI1_MCK>,
+				<&topckgen CLK_TOP_I2SI2_MCK>,
+				<&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>,
+				<&scp_adsp CLK_SCP_ADSP_AUDIODSP>;
+			clock-names = "clk26m",
+				"apll1_ck",
+				"apll2_ck",
+				"apll12_div0",
+				"apll12_div1",
+				"apll12_div2",
+				"apll12_div3",
+				"apll12_div9",
+				"a1sys_hp_sel",
+				"aud_intbus_sel",
+				"audio_h_sel",
+				"audio_local_bus_sel",
+				"dptx_m_sel",
+				"i2so1_m_sel",
+				"i2so2_m_sel",
+				"i2si1_m_sel",
+				"i2si2_m_sel",
+				"infra_ao_audio_26m_b",
+				"scp_adsp_audiodsp";
+			status = "disabled";
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001100 0 0x100>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart1: serial@11001200 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001200 0 0x100>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart2: serial@11001300 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001300 0 0x100>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart3: serial@11001400 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001400 0 0x100>;
+			interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart4: serial@11001500 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001500 0 0x100>;
+			interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART4>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		uart5: serial@11001600 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11001600 0 0x100>;
+			interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART5>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		auxadc: auxadc@11002000 {
+			compatible = "mediatek,mt8195-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pericfg_ao: syscon@11003000 {
+			compatible = "mediatek,mt8195-pericfg_ao", "syscon";
+			reg = <0 0x11003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@1100a000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		lvts_ap: thermal-sensor@1100b000 {
+			compatible = "mediatek,mt8195-lvts-ap";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		disp_pwm0: pwm@1100e000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM0>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		disp_pwm1: pwm@1100f000 {
+			compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100f000 0 0x1000>;
+			interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH 0>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM1>,
+				 <&infracfg_ao CLK_INFRA_AO_DISP_PWM1>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		spi1: spi@11010000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11010000 0 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI1>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi2: spi@11012000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11012000 0 0x1000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI2>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi3: spi@11013000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11013000 0 0x1000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI3>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi4: spi@11018000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11018000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI4>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spi5: spi@11019000 {
+			compatible = "mediatek,mt8195-spi",
+				     "mediatek,mt6765-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x11019000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+				 <&topckgen CLK_TOP_SPI>,
+				 <&infracfg_ao CLK_INFRA_AO_SPI5>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		spis0: spi@1101d000 {
+			compatible = "mediatek,mt8195-spi-slave";
+			reg = <0 0x1101d000 0 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SPIS0>;
+			clock-names = "spi";
+			assigned-clocks = <&topckgen CLK_TOP_SPIS>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+			status = "disabled";
+		};
+
+		spis1: spi@1101e000 {
+			compatible = "mediatek,mt8195-spi-slave";
+			reg = <0 0x1101e000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SPIS1>;
+			clock-names = "spi";
+			assigned-clocks = <&topckgen CLK_TOP_SPIS>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+			status = "disabled";
+		};
+
+		eth: ethernet@11021000 {
+			compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
+			reg = <0 0x11021000 0 0x4000>;
+			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "macirq";
+			clock-names = "axi",
+				      "apb",
+				      "mac_main",
+				      "ptp_ref",
+				      "rmii_internal",
+				      "mac_cg";
+			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
+				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
+				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+			assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+					  <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+					  <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+			assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+						 <&topckgen CLK_TOP_ETHPLL_D8>,
+						 <&topckgen CLK_TOP_ETHPLL_D10>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>;
+			mediatek,pericfg = <&infracfg_ao>;
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <16>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <4>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <4>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x10>;
+					snps,dcb-algorithm;
+					snps,priority = <0x0>;
+				};
+				queue1 {
+					snps,weight = <0x11>;
+					snps,dcb-algorithm;
+					snps,priority = <0x1>;
+				};
+				queue2 {
+					snps,weight = <0x12>;
+					snps,dcb-algorithm;
+					snps,priority = <0x2>;
+				};
+				queue3 {
+					snps,weight = <0x13>;
+					snps,dcb-algorithm;
+					snps,priority = <0x3>;
+				};
+			};
+		};
+
+		xhci0: usb@11200000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+				 <&topckgen CLK_TOP_SSUSB_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x10000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c70000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+				 <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11e60000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_MSDC30_2>,
+				 <&infracfg_ao CLK_INFRA_AO_CG1_MSDC2>,
+				 <&infracfg_ao CLK_INFRA_AO_CG3_MSDC2>;
+			clock-names = "source", "hclk", "source_cg";
+			assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+			status = "disabled";
+		};
+
+		lvts_mcu: thermal-sensor@11278000 {
+			compatible = "mediatek,mt8195-lvts-mcu";
+			reg = <0 0x11278000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
+			resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
+			nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
+			nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
+			#thermal-sensor-cells = <1>;
+		};
+
+		xhci1: usb@11290000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>,
+			      <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_P1_REF>,
+				 <&apmixedsys CLK_APMIXED_USB1PLL>,
+				 <&clk26m>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		xhci2: usb@112a0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		xhci3: usb@112b0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck",
+				      "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		pcie0: pcie@112f0000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f0000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x20000000
+				  0x0 0x20000000 0 0x200000>,
+				 <0x82000000 0 0x20200000
+				  0x0 0x20200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE0 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P0>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_26M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_96M>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_TL_32K>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_PERI_26M>,
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&pciephy>;
+			phy-names = "pcie-phy";
+
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			status = "disabled";
+
+			pcie_intc0: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		pcie1: pcie@112f8000 {
+			compatible = "mediatek,mt8195-pcie",
+				     "mediatek,mt8192-pcie";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg = <0 0x112f8000 0 0x4000>;
+			reg-names = "pcie-mac";
+			interrupts = <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH 0>;
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0x24000000
+				  0x0 0x24000000 0 0x200000>,
+				 <0x82000000 0 0x24200000
+				  0x0 0x24200000 0 0x3e00000>;
+
+			iommu-map = <0 &iommu_infra IOMMU_PORT_INFRA_PCIE1 0x2>;
+			iommu-map-mask = <0x0>;
+
+			clocks = <&infracfg_ao CLK_INFRA_AO_PCIE_PL_P_250M_P1>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_P1_TL_96M>,
+				 <&clk26m>,
+				 <&infracfg_ao CLK_INFRA_AO_PCIE_P1_PERI_26M>,
+				 /* Designer has connect pcie1 with peri_mem_p0 clock */
+				 <&pericfg_ao CLK_PERI_AO_PCIE_P0_MEM>;
+			clock-names = "pl_250m", "tl_26m", "tl_96m",
+				      "tl_32k", "peri_26m", "peri_mem";
+			assigned-clocks = <&topckgen CLK_TOP_TL_P1>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4_D4>;
+
+			phys = <&u3port1 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P1>;
+
+			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P1_SWRST>;
+			reset-names = "mac";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			status = "disabled";
+
+			pcie_intc1: interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		nor_flash: spi@1132c000 {
+			compatible = "mediatek,mt8195-nor",
+				     "mediatek,mt8173-nor";
+			reg = <0 0x1132c000 0 0x1000>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&topckgen CLK_TOP_SPINOR>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_FLASH>,
+				 <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+			clock-names = "spi", "sf", "axi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			u3_tx_imp_p0: usb3-tx-imp@184,1 {
+				reg = <0x184 0x1>;
+				bits = <0 5>;
+			};
+			u3_rx_imp_p0: usb3-rx-imp@184,2 {
+				reg = <0x184 0x2>;
+				bits = <5 5>;
+			};
+			u3_intr_p0: usb3-intr@185 {
+				reg = <0x185 0x1>;
+				bits = <2 6>;
+			};
+			comb_tx_imp_p1: usb3-tx-imp@186,1 {
+				reg = <0x186 0x1>;
+				bits = <0 5>;
+			};
+			comb_rx_imp_p1: usb3-rx-imp@186,2 {
+				reg = <0x186 0x2>;
+				bits = <5 5>;
+			};
+			comb_intr_p1: usb3-intr@187 {
+				reg = <0x187 0x1>;
+				bits = <2 6>;
+			};
+			u2_intr_p0: usb2-intr-p0@188,1 {
+				reg = <0x188 0x1>;
+				bits = <0 5>;
+			};
+			u2_intr_p1: usb2-intr-p1@188,2 {
+				reg = <0x188 0x2>;
+				bits = <5 5>;
+			};
+			u2_intr_p2: usb2-intr-p2@189,1 {
+				reg = <0x189 0x1>;
+				bits = <2 5>;
+			};
+			u2_intr_p3: usb2-intr-p3@189,2 {
+				reg = <0x189 0x2>;
+				bits = <7 5>;
+			};
+			pciephy_rx_ln1: pciephy-rx-ln1@190,1 {
+				reg = <0x190 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln1_nmos: pciephy-tx-ln1-nmos@190,2 {
+				reg = <0x190 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln1_pmos: pciephy-tx-ln1-pmos@191,1 {
+				reg = <0x191 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_rx_ln0: pciephy-rx-ln0@191,2 {
+				reg = <0x191 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_tx_ln0_nmos: pciephy-tx-ln0-nmos@192,1 {
+				reg = <0x192 0x1>;
+				bits = <0 4>;
+			};
+			pciephy_tx_ln0_pmos: pciephy-tx-ln0-pmos@192,2 {
+				reg = <0x192 0x1>;
+				bits = <4 4>;
+			};
+			pciephy_glb_intr: pciephy-glb-intr@193 {
+				reg = <0x193 0x1>;
+				bits = <0 4>;
+			};
+			dp_calibration: dp-data@1ac {
+				reg = <0x1ac 0x10>;
+			};
+			lvts_efuse_data1: lvts1-calib@1bc {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_efuse_data2: lvts2-calib@1d0 {
+				reg = <0x1d0 0x38>;
+			};
+		};
+
+		u3phy2: t-phy@11c40000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c40000 0x700>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy3: t-phy@11c50000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c50000 0x700>;
+			status = "disabled";
+
+			u2port3: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		i2c5: i2c@11d00000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11d00000 0 0x1000>,
+			      <0 0x10220580 0 0x80>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C5>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@11d01000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11d01000 0 0x1000>,
+			      <0 0x10220600 0 0x80>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C6>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@11d02000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11d02000 0 0x1000>,
+			      <0 0x10220680 0 0x80>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_s: clock-controller@11d03000 {
+			compatible = "mediatek,mt8195-imp_iic_wrap_s";
+			reg = <0 0x11d03000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		i2c0: i2c@11e00000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e00000 0 0x1000>,
+			      <0 0x10220080 0 0x80>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C0>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11e01000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e01000 0 0x1000>,
+			      <0 0x10220200 0 0x80>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C1>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11e02000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e02000 0 0x1000>,
+			      <0 0x10220380 0 0x80>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C2>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11e03000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e03000 0 0x1000>,
+			      <0 0x10220480 0 0x80>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C3>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@11e04000 {
+			compatible = "mediatek,mt8195-i2c",
+				     "mediatek,mt8192-i2c";
+			reg = <0 0x11e04000 0 0x1000>,
+			      <0 0x10220500 0 0x80>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+			clock-div = <1>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C4>,
+				 <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		imp_iic_wrap_w: clock-controller@11e05000 {
+			compatible = "mediatek,mt8195-imp_iic_wrap_w";
+			reg = <0 0x11e05000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		u3phy1: t-phy@11e30000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e30000 0xe00>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
+					 <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
+				clock-names = "ref", "da_ref";
+				nvmem-cells = <&comb_intr_p1>,
+					      <&comb_rx_imp_p1>,
+					      <&comb_tx_imp_p1>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
+				#phy-cells = <1>;
+			};
+		};
+
+		u3phy0: t-phy@11e40000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e40000 0xe00>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+					 <&clk26m>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x700>;
+				clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
+					 <&topckgen CLK_TOP_SSUSB_PHY_REF>;
+				clock-names = "ref", "da_ref";
+				nvmem-cells = <&u3_intr_p0>,
+					      <&u3_rx_imp_p0>,
+					      <&u3_tx_imp_p0>;
+				nvmem-cell-names = "intr", "rx_imp", "tx_imp";
+				#phy-cells = <1>;
+			};
+		};
+
+		pciephy: phy@11e80000 {
+			compatible = "mediatek,mt8195-pcie-phy";
+			reg = <0 0x11e80000 0 0x10000>;
+			reg-names = "sif";
+			nvmem-cells = <&pciephy_glb_intr>, <&pciephy_tx_ln0_pmos>,
+				      <&pciephy_tx_ln0_nmos>, <&pciephy_rx_ln0>,
+				      <&pciephy_tx_ln1_pmos>, <&pciephy_tx_ln1_nmos>,
+				      <&pciephy_rx_ln1>;
+			nvmem-cell-names = "glb_intr", "tx_ln0_pmos",
+					   "tx_ln0_nmos", "rx_ln0",
+					   "tx_ln1_pmos", "tx_ln1_nmos",
+					   "rx_ln1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_PHY>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ufsphy: ufs-phy@11fa0000 {
+			compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
+			reg = <0 0x11fa0000 0 0xc000>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "unipro", "mp";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		gpu: gpu@13000000 {
+			compatible = "mediatek,mt8195-mali", "mediatek,mt8192-mali",
+				     "arm,mali-valhall-jm";
+			reg = <0 0x13000000 0 0x4000>;
+
+			clocks = <&mfgcfg CLK_MFG_BG3D>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "job", "mmu", "gpu";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_MFG2>,
+					<&spm MT8195_POWER_DOMAIN_MFG3>,
+					<&spm MT8195_POWER_DOMAIN_MFG4>,
+					<&spm MT8195_POWER_DOMAIN_MFG5>,
+					<&spm MT8195_POWER_DOMAIN_MFG6>;
+			power-domain-names = "core0", "core1", "core2", "core3", "core4";
+			status = "disabled";
+		};
+
+		mfgcfg: clock-controller@13fbf000 {
+			compatible = "mediatek,mt8195-mfgcfg";
+			reg = <0 0x13fbf000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vppsys0: syscon@14000000 {
+			compatible = "mediatek,mt8195-vppsys0", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex@1400f000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xf000 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_sub_common_vpp0_vpp1_2x1: smi@14010000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x14010000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_sub_common_vdec_vpp0_2x1: smi@14011000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x14011000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		smi_common_vpp: smi@14012000 {
+			compatible = "mediatek,mt8195-smi-common-vpp";
+			reg = <0 0x14012000 0 0x1000>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+			       <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>,
+			       <&vppsys0 CLK_VPP0_SMI_RSI>,
+			       <&vppsys0 CLK_VPP0_SMI_RSI>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		larb4: larb@14013000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14013000 0 0x1000>;
+			mediatek,larb-id = <4>;
+			mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>,
+			       <&vppsys0 CLK_VPP0_SMI_COMMON_LARB4>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		iommu_vpp: iommu@14018000 {
+			compatible = "mediatek,mt8195-iommu-vpp";
+			reg = <0 0x14018000 0 0x1000>;
+			mediatek,larbs = <&larb1 &larb3 &larb4 &larb6 &larb8
+					  &larb12 &larb14 &larb16 &larb18
+					  &larb20 &larb22 &larb23 &larb26
+					  &larb27>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vppsys0 CLK_VPP0_SMI_IOMMU>;
+			clock-names = "bclk";
+			#iommu-cells = <1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>;
+		};
+
+		wpesys: clock-controller@14e00000 {
+			compatible = "mediatek,mt8195-wpesys";
+			reg = <0 0x14e00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp0: clock-controller@14e02000 {
+			compatible = "mediatek,mt8195-wpesys_vpp0";
+			reg = <0 0x14e02000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		wpesys_vpp1: clock-controller@14e03000 {
+			compatible = "mediatek,mt8195-wpesys_vpp1";
+			reg = <0 0x14e03000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb7: larb@14e04000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14e04000 0 0x1000>;
+			mediatek,larb-id = <7>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB7>,
+				 <&wpesys CLK_WPE_SMI_LARB7>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
+		};
+
+		larb8: larb@14e05000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14e05000 0 0x1000>;
+			mediatek,larb-id = <8>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&wpesys CLK_WPE_SMI_LARB8>,
+			       <&wpesys CLK_WPE_SMI_LARB8>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_WPE>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_WPESYS>;
+		};
+
+		vppsys1: syscon@14f00000 {
+			compatible = "mediatek,mt8195-vppsys1", "syscon";
+			reg = <0 0x14f00000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex@14f01000 {
+			compatible = "mediatek,mt8195-vpp-mutex";
+			reg = <0 0x14f01000 0 0x1000>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x1000 0x1000>;
+			clocks = <&vppsys1 CLK_VPP1_DISP_MUTEX>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		larb5: larb@14f02000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14f02000 0 0x1000>;
+			mediatek,larb-id = <5>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>,
+			       <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_LARB5>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		larb6: larb@14f03000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x14f03000 0 0x1000>;
+			mediatek,larb-id = <6>;
+			mediatek,smi = <&smi_sub_common_vpp0_vpp1_2x1>;
+			clocks = <&vppsys1 CLK_VPP1_VPPSYS1_LARB>,
+			       <&vppsys1 CLK_VPP1_VPPSYS1_GALS>,
+			       <&vppsys0 CLK_VPP0_GALS_VPP1_LARB6>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>;
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8195-imgsys";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb9: larb@15001000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,larb-id = <9>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		smi_sub_common_img0_3x1: smi@15002000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x15002000 0 0x1000>;
+			clocks = <&imgsys CLK_IMG_IPE>,
+				 <&imgsys CLK_IMG_IPE>,
+				 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		smi_sub_common_img1_3x1: smi@15003000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x15003000 0 0x1000>;
+			clocks = <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_LARB9>,
+				 <&imgsys CLK_IMG_GALS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vdo>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_IMG>;
+		};
+
+		imgsys1_dip_top: clock-controller@15110000 {
+			compatible = "mediatek,mt8195-imgsys1_dip_top";
+			reg = <0 0x15110000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb10: larb@15120000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15120000 0 0x1000>;
+			mediatek,larb-id = <10>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_DIP0>,
+			       <&imgsys1_dip_top CLK_IMG1_DIP_TOP_LARB10>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DIP>;
+		};
+
+		imgsys1_dip_nr: clock-controller@15130000 {
+			compatible = "mediatek,mt8195-imgsys1_dip_nr";
+			reg = <0 0x15130000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		imgsys1_wpe: clock-controller@15220000 {
+			compatible = "mediatek,mt8195-imgsys1_wpe";
+			reg = <0 0x15220000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb11: larb@15230000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15230000 0 0x1000>;
+			mediatek,larb-id = <11>;
+			mediatek,smi = <&smi_sub_common_img1_3x1>;
+			clocks = <&imgsys CLK_IMG_WPE0>,
+			       <&imgsys1_wpe CLK_IMG1_WPE_LARB11>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DIP>;
+		};
+
+		ipesys: clock-controller@15330000 {
+			compatible = "mediatek,mt8195-ipesys";
+			reg = <0 0x15330000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb12: larb@15340000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x15340000 0 0x1000>;
+			mediatek,larb-id = <12>;
+			mediatek,smi = <&smi_sub_common_img0_3x1>;
+			clocks = <&ipesys CLK_IPE_SMI_LARB12>,
+				 <&ipesys CLK_IPE_SMI_LARB12>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_IPE>;
+		};
+
+		camsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8195-camsys";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb13: larb@16001000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16001000 0 0x1000>;
+			mediatek,larb-id = <13>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+			       <&camsys CLK_CAM_LARB13>,
+			       <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		larb14: larb@16002000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16002000 0 0x1000>;
+			mediatek,larb-id = <14>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys CLK_CAM_LARB14>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		smi_sub_common_cam_4x1: smi@16004000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x16004000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys CLK_CAM_LARB13>,
+				 <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vdo>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		smi_sub_common_cam_7x1: smi@16005000 {
+			compatible = "mediatek,mt8195-smi-sub-common";
+			reg = <0 0x16005000 0 0x1000>;
+			clocks = <&camsys CLK_CAM_LARB14>,
+				 <&camsys CLK_CAM_CAM2MM1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_IMGSYS_CAMSYS>;
+			clock-names = "apb", "smi", "gals0";
+			mediatek,smi = <&smi_common_vpp>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		larb16: larb@16012000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16012000 0 0x1000>;
+			mediatek,larb-id = <16>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>,
+				 <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb17: larb@16013000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16013000 0 0x1000>;
+			mediatek,larb-id = <17>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys_yuva CLK_CAM_YUVA_LARBX>,
+				 <&camsys_yuva CLK_CAM_YUVA_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWA>;
+		};
+
+		larb27: larb@16014000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16014000 0 0x1000>;
+			mediatek,larb-id = <27>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>,
+				 <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		larb28: larb@16015000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16015000 0 0x1000>;
+			mediatek,larb-id = <28>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys_yuvb CLK_CAM_YUVB_LARBX>,
+				 <&camsys_yuvb CLK_CAM_YUVB_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_RAWB>;
+		};
+
+		camsys_rawa: clock-controller@1604f000 {
+			compatible = "mediatek,mt8195-camsys_rawa";
+			reg = <0 0x1604f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuva: clock-controller@1606f000 {
+			compatible = "mediatek,mt8195-camsys_yuva";
+			reg = <0 0x1606f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_rawb: clock-controller@1608f000 {
+			compatible = "mediatek,mt8195-camsys_rawb";
+			reg = <0 0x1608f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_yuvb: clock-controller@160af000 {
+			compatible = "mediatek,mt8195-camsys_yuvb";
+			reg = <0 0x160af000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		camsys_mraw: clock-controller@16140000 {
+			compatible = "mediatek,mt8195-camsys_mraw";
+			reg = <0 0x16140000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb25: larb@16141000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16141000 0 0x1000>;
+			mediatek,larb-id = <25>;
+			mediatek,smi = <&smi_sub_common_cam_4x1>;
+			clocks = <&camsys CLK_CAM_LARB13>,
+				 <&camsys_mraw CLK_CAM_MRAW_LARBX>,
+				 <&camsys CLK_CAM_CAM2MM0_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>;
+		};
+
+		larb26: larb@16142000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x16142000 0 0x1000>;
+			mediatek,larb-id = <26>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&camsys_mraw CLK_CAM_MRAW_LARBX>,
+				 <&camsys_mraw CLK_CAM_MRAW_LARBX>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM_MRAW>;
+
+		};
+
+		ccusys: clock-controller@17200000 {
+			compatible = "mediatek,mt8195-ccusys";
+			reg = <0 0x17200000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb18: larb@17201000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x17201000 0 0x1000>;
+			mediatek,larb-id = <18>;
+			mediatek,smi = <&smi_sub_common_cam_7x1>;
+			clocks = <&ccusys CLK_CCU_LARB18>,
+				 <&ccusys CLK_CCU_LARB18>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_CAM>;
+		};
+
+		video-codec@18000000 {
+			compatible = "mediatek,mt8195-vcodec-dec";
+			mediatek,scp = <&scp>;
+			iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			reg = <0 0x18000000 0 0x1000>,
+			      <0 0x18004000 0 0x1000>;
+			ranges = <0 0 0 0x18000000 0 0x26000>;
+
+			video-codec@2000 {
+				compatible = "mediatek,mtk-vcodec-lat-soc";
+				reg = <0 0x2000 0 0x800>;
+				iommus = <&iommu_vpp M4U_PORT_L23_VDEC_UFO_ENC_EXT>,
+					 <&iommu_vpp M4U_PORT_L23_VDEC_RDMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@10000 {
+				compatible = "mediatek,mtk-vcodec-lat";
+				reg = <0 0x10000 0 0x800>;
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_VLD2_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_AVC_MC_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_PRED_RD_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_TILE_EXT>,
+					 <&iommu_vdo M4U_PORT_L24_VDEC_LAT0_WDMA_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+					 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			video-codec@25000 {
+				compatible = "mediatek,mtk-vcodec-core";
+				reg = <0 0x25000 0 0x1000>;		/* VDEC_CORE_MISC */
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				iommus = <&iommu_vdo M4U_PORT_L21_VDEC_MC_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_UFO_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PP_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PRED_RD_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PRED_WR_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_PPWRAP_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_TILE_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_VLD_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_VLD2_EXT>,
+					 <&iommu_vdo M4U_PORT_L21_VDEC_AVC_MV_EXT>;
+				clocks = <&topckgen CLK_TOP_VDEC>,
+					 <&vdecsys CLK_VDEC_VDEC>,
+					 <&vdecsys CLK_VDEC_LAT>,
+					 <&topckgen CLK_TOP_UNIVPLL_D4>;
+				clock-names = "sel", "vdec", "lat", "top";
+				assigned-clocks = <&topckgen CLK_TOP_VDEC>;
+				assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			};
+		};
+
+		larb24: larb@1800d000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1800d000 0 0x1000>;
+			mediatek,larb-id = <24>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+		};
+
+		larb23: larb@1800e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1800e000 0 0x1000>;
+			mediatek,larb-id = <23>;
+			mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+		};
+
+		vdecsys_soc: clock-controller@1800f000 {
+			compatible = "mediatek,mt8195-vdecsys_soc";
+			reg = <0 0x1800f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb21: larb@1802e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1802e000 0 0x1000>;
+			mediatek,larb-id = <21>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdecsys CLK_VDEC_LARB1>,
+				 <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+		};
+
+		vdecsys: clock-controller@1802f000 {
+			compatible = "mediatek,mt8195-vdecsys";
+			reg = <0 0x1802f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb22: larb@1803e000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1803e000 0 0x1000>;
+			mediatek,larb-id = <22>;
+			mediatek,smi = <&smi_sub_common_vdec_vpp0_2x1>;
+			clocks = <&vppsys0 CLK_VPP0_GALS_VDEC_VDEC_CORE1>,
+				 <&vdecsys_core1 CLK_VDEC_CORE1_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+		};
+
+		vdecsys_core1: clock-controller@1803f000 {
+			compatible = "mediatek,mt8195-vdecsys_core1";
+			reg = <0 0x1803f000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apusys_pll: clock-controller@190f3000 {
+			compatible = "mediatek,mt8195-apusys_pll";
+			reg = <0 0x190f3000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vencsys: clock-controller@1a000000 {
+			compatible = "mediatek,mt8195-vencsys";
+			reg = <0 0x1a000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb19: larb@1a010000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1a010000 0 0x1000>;
+			mediatek,larb-id = <19>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vencsys CLK_VENC_VENC>,
+				 <&vencsys CLK_VENC_GALS>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+		};
+
+		venc: video-codec@1a020000 {
+			compatible = "mediatek,mt8195-vcodec-enc";
+			reg = <0 0x1a020000 0 0x10000>;
+			iommus = <&iommu_vdo M4U_PORT_L19_VENC_RCPU>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REC>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_BSDMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_SV_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_RD_COMV>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_CUR_CHROMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_LUMA>,
+				 <&iommu_vdo M4U_PORT_L19_VENC_REF_CHROMA>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,scp = <&scp>;
+			clocks = <&vencsys CLK_VENC_VENC>;
+			clock-names = "venc_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+		};
+
+		jpgdec-master {
+			compatible = "mediatek,mt8195-jpgdec";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			jpgdec@1a040000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGDEC>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+			};
+
+			jpgdec@1a050000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+			};
+
+			jpgdec@1b040000 {
+				compatible = "mediatek,mt8195-jpgdec-hw";
+				reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+				iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+				interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+				clock-names = "jpgdec";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+			};
+		};
+
+		vencsys_core1: clock-controller@1b000000 {
+			compatible = "mediatek,mt8195-vencsys_core1";
+			reg = <0 0x1b000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		vdosys0: syscon@1c01a000 {
+			compatible = "mediatek,mt8195-vdosys0", "mediatek,mt8195-mmsys", "syscon";
+			reg = <0 0x1c01a000 0 0x1000>;
+			mboxes = <&gce0 0 CMDQ_THR_PRIO_4>;
+			#clock-cells = <1>;
+		};
+
+
+		jpgenc-master {
+			compatible = "mediatek,mt8195-jpgenc";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+			iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+					<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			jpgenc@1a030000 {
+				compatible = "mediatek,mt8195-jpgenc-hw";
+				reg = <0 0x1a030000 0 0x10000>;
+				iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+						<&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys CLK_VENC_JPGENC>;
+				clock-names = "jpgenc";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+			};
+
+			jpgenc@1b030000 {
+				compatible = "mediatek,mt8195-jpgenc-hw";
+				reg = <0 0x1b030000 0 0x10000>;
+				iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+						<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+				interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+				clock-names = "jpgenc";
+				power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+			};
+		};
+
+		larb20: larb@1b010000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1b010000 0 0x1000>;
+			mediatek,larb-id = <20>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vencsys_core1 CLK_VENC_CORE1_VENC>,
+				 <&vencsys_core1 CLK_VENC_CORE1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+		};
+
+		ovl0: ovl@1c000000 {
+			compatible = "mediatek,mt8195-disp-ovl", "mediatek,mt8183-disp-ovl";
+			reg = <0 0x1c000000 0 0x1000>;
+			interrupts = <GIC_SPI 636 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_OVL0>;
+			iommus = <&iommu_vdo M4U_PORT_L0_DISP_OVL0_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x0000 0x1000>;
+		};
+
+		rdma0: rdma@1c002000 {
+			compatible = "mediatek,mt8195-disp-rdma";
+			reg = <0 0x1c002000 0 0x1000>;
+			interrupts = <GIC_SPI 638 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_RDMA0>;
+			iommus = <&iommu_vdo M4U_PORT_L0_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x2000 0x1000>;
+		};
+
+		color0: color@1c003000 {
+			compatible = "mediatek,mt8195-disp-color", "mediatek,mt8173-disp-color";
+			reg = <0 0x1c003000 0 0x1000>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_COLOR0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x3000 0x1000>;
+		};
+
+		ccorr0: ccorr@1c004000 {
+			compatible = "mediatek,mt8195-disp-ccorr", "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1c004000 0 0x1000>;
+			interrupts = <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x4000 0x1000>;
+		};
+
+		aal0: aal@1c005000 {
+			compatible = "mediatek,mt8195-disp-aal", "mediatek,mt8183-disp-aal";
+			reg = <0 0x1c005000 0 0x1000>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x5000 0x1000>;
+		};
+
+		gamma0: gamma@1c006000 {
+			compatible = "mediatek,mt8195-disp-gamma", "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1c006000 0 0x1000>;
+			interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x6000 0x1000>;
+		};
+
+		dither0: dither@1c007000 {
+			compatible = "mediatek,mt8195-disp-dither", "mediatek,mt8183-disp-dither";
+			reg = <0 0x1c007000 0 0x1000>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>;
+		};
+
+		dsc0: dsc@1c009000 {
+			compatible = "mediatek,mt8195-disp-dsc";
+			reg = <0 0x1c009000 0 0x1000>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>;
+		};
+
+		merge0: merge@1c014000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c014000 0 0x1000>;
+			interrupts = <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_VPP_MERGE0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c01XXXX 0x4000 0x1000>;
+		};
+
+		dp_intf0: dp-intf@1c015000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c015000 0 0x1000>;
+			interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys0  CLK_VDO0_DP_INTF0>,
+				 <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL1>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
+		mutex: mutex@1c016000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c016000 0 0x1000>;
+			interrupts = <GIC_SPI 658 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+			clocks = <&vdosys0 CLK_VDO0_DISP_MUTEX0>;
+			mediatek,gce-events = <CMDQ_EVENT_VDO0_DISP_STREAM_DONE_0>;
+		};
+
+		larb0: larb@1c018000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c018000 0 0x1000>;
+			mediatek,larb-id = <0>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB0>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		larb1: larb@1c019000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c019000 0 0x1000>;
+			mediatek,larb-id = <1>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_LARB>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_LARB1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		vdosys1: syscon@1c100000 {
+			compatible = "mediatek,mt8195-vdosys1", "syscon";
+			reg = <0 0x1c100000 0 0x1000>;
+			mboxes = <&gce0 1 CMDQ_THR_PRIO_4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x0000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		smi_common_vdo: smi@1c01b000 {
+			compatible = "mediatek,mt8195-smi-common-vdo";
+			reg = <0 0x1c01b000 0 0x1000>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_COMMON>,
+				 <&vdosys0 CLK_VDO0_SMI_EMI>,
+				 <&vdosys0 CLK_VDO0_SMI_RSI>,
+				 <&vdosys0 CLK_VDO0_SMI_GALS>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+
+		};
+
+		iommu_vdo: iommu@1c01f000 {
+			compatible = "mediatek,mt8195-iommu-vdo";
+			reg = <0 0x1c01f000 0 0x1000>;
+			mediatek,larbs = <&larb0 &larb2 &larb5 &larb7 &larb9
+					  &larb10 &larb11 &larb13 &larb17
+					  &larb19 &larb21 &larb24 &larb25
+					  &larb28>;
+			interrupts = <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>;
+			#iommu-cells = <1>;
+			clocks = <&vdosys0 CLK_VDO0_SMI_IOMMU>;
+			clock-names = "bclk";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+		};
+
+		mutex1: mutex@1c101000 {
+			compatible = "mediatek,mt8195-disp-mutex";
+			reg = <0 0x1c101000 0 0x1000>;
+			reg-names = "vdo1_mutex";
+			interrupts = <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MUTEX>;
+			clock-names = "vdo1_mutex";
+			mediatek,gce-events = <CMDQ_EVENT_VDO1_STREAM_DONE_ENG_0>;
+		};
+
+		larb2: larb@1c102000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c102000 0 0x1000>;
+			mediatek,larb-id = <2>;
+			mediatek,smi = <&smi_common_vdo>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_SMI_LARB2>,
+				 <&vdosys1 CLK_VDO1_GALS>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+		};
+
+		larb3: larb@1c103000 {
+			compatible = "mediatek,mt8195-smi-larb";
+			reg = <0 0x1c103000 0 0x1000>;
+			mediatek,larb-id = <3>;
+			mediatek,smi = <&smi_common_vpp>;
+			clocks = <&vdosys1 CLK_VDO1_SMI_LARB3>,
+				 <&vdosys1 CLK_VDO1_GALS>,
+				 <&vppsys0 CLK_VPP0_GALS_VDO0_VDO1_VENCSYS_CORE1>;
+			clock-names = "apb", "smi", "gals";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+		};
+
+		vdo1_rdma0: dma-controller@1c104000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c104000 0 0x1000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma1: dma-controller@1c105000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c105000 0 0x1000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA1>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma2: dma-controller@1c106000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c106000 0 0x1000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA2>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma3: dma-controller@1c107000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c107000 0 0x1000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA3>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma4: dma-controller@1c108000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c108000 0 0x1000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA4>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma5: dma-controller@1c109000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c109000 0 0x1000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA5>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma6: dma-controller@1c10a000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10a000 0 0x1000>;
+			interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA6>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		vdo1_rdma7: dma-controller@1c10b000 {
+			compatible = "mediatek,mt8195-vdo1-rdma";
+			reg = <0 0x1c10b000 0 0x1000>;
+			interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_MDP_RDMA7>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>;
+			#dma-cells = <1>;
+		};
+
+		merge1: vpp-merge@1c10c000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10c000 0 0x1000>;
+			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE0>,
+				 <&vdosys1 CLK_VDO1_MERGE0_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xc000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE0_DL_ASYNC>;
+		};
+
+		merge2: vpp-merge@1c10d000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10d000 0 0x1000>;
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE1>,
+				 <&vdosys1 CLK_VDO1_MERGE1_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xd000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE1_DL_ASYNC>;
+		};
+
+		merge3: vpp-merge@1c10e000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10e000 0 0x1000>;
+			interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE2>,
+				 <&vdosys1 CLK_VDO1_MERGE2_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xe000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE2_DL_ASYNC>;
+		};
+
+		merge4: vpp-merge@1c10f000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c10f000 0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE3>,
+				 <&vdosys1 CLK_VDO1_MERGE3_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xf000 0x1000>;
+			mediatek,merge-mute;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE3_DL_ASYNC>;
+		};
+
+		merge5: vpp-merge@1c110000 {
+			compatible = "mediatek,mt8195-disp-merge";
+			reg = <0 0x1c110000 0 0x1000>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&vdosys1 CLK_VDO1_VPP_MERGE4>,
+				 <&vdosys1 CLK_VDO1_MERGE4_DL_ASYNC>;
+			clock-names = "merge","merge_async";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x0000 0x1000>;
+			mediatek,merge-fifo-en;
+			resets = <&vdosys1 MT8195_VDOSYS1_SW0_RST_B_MERGE4_DL_ASYNC>;
+		};
+
+		dp_intf1: dp-intf@1c113000 {
+			compatible = "mediatek,mt8195-dp-intf";
+			reg = <0 0x1c113000 0 0x1000>;
+			interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
+				 <&vdosys1 CLK_VDO1_DPINTF>,
+				 <&apmixedsys CLK_APMIXED_TVDPLL2>;
+			clock-names = "engine", "pixel", "pll";
+			status = "disabled";
+		};
+
+		ethdr0: hdr-engine@1c114000 {
+			compatible = "mediatek,mt8195-disp-ethdr";
+			reg = <0 0x1c114000 0 0x1000>,
+			      <0 0x1c115000 0 0x1000>,
+			      <0 0x1c117000 0 0x1000>,
+			      <0 0x1c119000 0 0x1000>,
+			      <0 0x1c11a000 0 0x1000>,
+			      <0 0x1c11b000 0 0x1000>,
+			      <0 0x1c11c000 0 0x1000>;
+			reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				    "vdo_be", "adl_ds";
+			mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+						  <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+			clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+				 <&vdosys1 CLK_VDO1_26M_SLOW>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+				 <&topckgen CLK_TOP_ETHDR>;
+			clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+				      "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+				      "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+				      "ethdr_top";
+			power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+			iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+				 <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+			interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+			resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+				 <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+			reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+				      "gfx_fe1_async", "vdo_be_async";
+		};
+
+		edp_tx: edp-tx@1c500000 {
+			compatible = "mediatek,mt8195-edp-tx";
+			reg = <0 0x1c500000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_EPD_TX>;
+			interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+
+		dp_tx: dp-tx@1c600000 {
+			compatible = "mediatek,mt8195-dp-tx";
+			reg = <0 0x1c600000 0 0x8000>;
+			nvmem-cells = <&dp_calibration>;
+			nvmem-cell-names = "dp_calibration_data";
+			power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+			max-linkrate-mhz = <8100>;
+			status = "disabled";
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
+
+			trips {
+				cpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU1>;
+
+			trips {
+				cpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU2>;
+
+			trips {
+				cpu2_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU3>;
+
+			trips {
+				cpu3_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU0>;
+
+			trips {
+				cpu4_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU1>;
+
+			trips {
+				cpu5_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU2>;
+
+			trips {
+				cpu6_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_mcu MT8195_MCU_BIG_CPU3>;
+
+			trips {
+				cpu7_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+								<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		vpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VPU0>;
+
+			trips {
+				vpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VPU1>;
+
+			trips {
+				vpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_GPU0>;
+
+			trips {
+				gpu0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_GPU1>;
+
+			trips {
+				gpu1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		vdec-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_VDEC>;
+
+			trips {
+				vdec_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				vdec_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		img-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_IMG>;
+
+			trips {
+				img_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				img_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		infra-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_INFRA>;
+
+			trips {
+				infra_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				infra_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam0-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_CAM0>;
+
+			trips {
+				cam0_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam0_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cam1-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <250>;
+			thermal-sensors = <&lvts_ap MT8195_AP_CAM1>;
+
+			trips {
+				cam1_alert: trip-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cam1_crit: trip-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 000000000..50cbaefa1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 BayLibre, SAS.
+ * Authors:
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+#include "mt6357.dtsi"
+
+/ {
+	model = "MediaTek MT8365 Open Platform EVK";
+	compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-volume-up {
+			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0xc0000000>;
+	};
+
+	usb_otg_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x30000>;
+		};
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+};
+
+&cpu0 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&ethernet {
+	pinctrl-0 = <&ethernet_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	/*
+	 * Ethernet and HDMI (DSI0) are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 * mt6357_vibr_reg and mt6357_vsim2_reg are needed to supply ethernet
+	 */
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc0 {
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	cap-mmc-hw-reset;
+	hs400-ds-delay = <0x12012>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-0 = <&mmc0_default_pins>;
+	pinctrl-1 = <&mmc0_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&mt6357_vemc_reg>;
+	vqmmc-supply = <&mt6357_vio18_reg>;
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
+	max-frequency = <200000000>;
+	pinctrl-0 = <&mmc1_default_pins>;
+	pinctrl-1 = <&mmc1_uhs_pins>;
+	pinctrl-names = "default", "state_uhs";
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	vmmc-supply = <&mt6357_vmch_reg>;
+	vqmmc-supply = <&mt6357_vmc_reg>;
+	status = "okay";
+};
+
+&mt6357_pmic {
+	interrupts-extended = <&pio 145 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+&pio {
+	ethernet_pins: ethernet-pins {
+		phy_reset_pins {
+			pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
+		};
+
+		rmii_pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>,
+				 <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>,
+				 <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>,
+				 <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>,
+				 <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>,
+				 <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>,
+				 <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>,
+				 <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>,
+				 <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>,
+				 <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>,
+				 <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>,
+				 <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>;
+		};
+	};
+
+	gpio_keys: gpio-keys-pins {
+		pins {
+			pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0-pins {
+		pins {
+			pinmux = <MT8365_PIN_57_SDA0__FUNC_SDA0_0>,
+				 <MT8365_PIN_58_SCL0__FUNC_SCL0_0>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_default_pins: mmc0-default-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_uhs_pins: mmc0-uhs-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		ds-pins {
+			pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		rst-pins {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_default_pins: mmc1-default-pins {
+		cd-pins {
+			pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+			bias-pull-up;
+		};
+
+		clk-pins {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_uhs_pins: mmc1-uhs-pins {
+		clk-pins {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		cmd-dat-pins {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+				 <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+				 <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+				 <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+		};
+	};
+
+	usb_pins: usb-pins {
+		id-pins {
+			pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		usb0-vbus-pins {
+			pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+			output-high;
+		};
+
+		usb1-vbus-pins {
+			pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+			output-high;
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		pins {
+			pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+				 <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	usb-role-switch;
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+		type = "micro";
+		vbus-supply = <&usb_otg_vbus>;
+	};
+};
+
+&usb_host {
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 000000000..413496c92
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) 2018 MediaTek Inc.
+ * Copyright (C) 2022 BayLibre SAS
+ * Fabien Parent <fparent@baylibre.com>
+ * Bernhard Rosenkränzer <bero@baylibre.com>
+ */
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt8365";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <650000>;
+		};
+
+		opp-918000000 {
+			opp-hz = /bits/ 64 <918000000>;
+			opp-microvolt = <668750>;
+		};
+
+		opp-987000000 {
+			opp-hz = /bits/ 64 <987000000>;
+			opp-microvolt = <687500>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <706250>;
+		};
+
+		opp-1125000000 {
+			opp-hz = /bits/ 64 <1125000000>;
+			opp-microvolt = <725000>;
+		};
+
+		opp-1216000000 {
+			opp-hz = /bits/ 64 <1216000000>;
+			opp-microvolt = <750000>;
+		};
+
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <775000>;
+		};
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <800000>;
+		};
+
+		opp-1466000000 {
+			opp-hz = /bits/ 64 <1466000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-1533000000 {
+			opp-hz = /bits/ 64 <1533000000>;
+			opp-microvolt = <850000>;
+		};
+
+		opp-1633000000 {
+			opp-hz = /bits/ 64 <1633000000>;
+			opp-microvolt = <887500>;
+		};
+
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <912500>;
+		};
+
+		opp-1767000000 {
+			opp-hz = /bits/ 64 <1767000000>;
+			opp-microvolt = <937500>;
+		};
+
+		opp-1834000000 {
+			opp-hz = /bits/ 64 <1834000000>;
+			opp-microvolt = <962500>;
+		};
+
+		opp-1917000000 {
+			opp-hz = /bits/ 64 <1917000000>;
+			opp-microvolt = <993750>;
+		};
+
+		opp-2001000000 {
+			opp-hz = /bits/ 64 <2001000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_MCDI &CLUSTER_MCDI &CLUSTER_DPIDLE>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_MCDI: cpu-mcdi {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <300>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+
+			CLUSTER_MCDI: cluster-mcdi {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <350>;
+				exit-latency-us = <250>;
+				min-residency-us = <1200>;
+			};
+
+			CLUSTER_DPIDLE: cluster-dpidle {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010004>;
+				entry-latency-us = <300>;
+				exit-latency-us = <800>;
+				min-residency-us = <3300>;
+			};
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x10000>, /* GICD */
+			      <0 0x0c080000 0 0x80000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,  /* GICC */
+			      <0 0x0c410000 0 0x1000>,  /* GICH */
+			      <0 0x0c420000 0 0x2000>;  /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8365-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8365-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "mediatek,mt8365-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8365-wdt", "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8365-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8365-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8365-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+				 <&infracfg CLK_IFR_PMIC_AP>,
+				 <&infracfg CLK_IFR_PWRAP_SYS>,
+				 <&infracfg CLK_IFR_PWRAP_TMR>;
+			clock-names = "spi", "wrap", "sys", "tmr";
+		};
+
+		keypad: keypad@10010000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		mcucfg: syscon@10200000 {
+			compatible = "mediatek,mt8365-mcucfg", "syscon";
+			reg = <0 0x10200000 0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: interrupt-controller@10200a80 {
+			compatible = "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200a80 0 0x20>;
+		};
+
+		infracfg_nao: infracfg@1020e000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x1020e000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt8365-rng", "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_IFR_TRNG>;
+			clock-names = "rng";
+		};
+
+		apdma: dma-controller@11000280 {
+			compatible = "mediatek,mt8365-uart-dma", "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000280 0 0x80>,
+			      <0 0x11000300 0 0x80>,
+			      <0 0x11000380 0 0x80>,
+			      <0 0x11000400 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0>, <&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2>, <&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8365-uart", "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4>, <&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt8365-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+				 <&infracfg CLK_IFR_PWM>,
+				 <&infracfg CLK_IFR_PWM1>,
+				 <&infracfg CLK_IFR_PWM2>,
+				 <&infracfg CLK_IFR_PWM3>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11007000 0 0xa0>, <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C0_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11008000 0 0xa0>, <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C1_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x11009000 0 0xa0>, <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C2_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8365-spi", "mediatek,mt7622-spi";
+			reg = <0 0x1100a000 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_IFR_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
+			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C3_AXI>, <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>, <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+				 <&infracfg CLK_IFR_SSUSB_REF>,
+				 <&infracfg CLK_IFR_SSUSB_SYS>,
+				 <&infracfg CLK_IFR_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8365-xhci", "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+					 <&infracfg CLK_IFR_SSUSB_REF>,
+					 <&infracfg CLK_IFR_SSUSB_SYS>,
+					 <&infracfg CLK_IFR_ICUSB>,
+					 <&infracfg CLK_IFR_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck",
+					      "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11cd0000 0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&infracfg CLK_IFR_MSDC0_HCLK>,
+				 <&infracfg CLK_IFR_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&infracfg CLK_IFR_MSDC1_HCLK>,
+				 <&infracfg CLK_IFR_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11250000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11250000 0 0x1000>,
+			      <0 0x11c60000 0 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_2_SEL>,
+				 <&infracfg CLK_IFR_MSDC2_HCLK>,
+				 <&infracfg CLK_IFR_MSDC2_SRC>,
+				 <&infracfg CLK_IFR_MSDC2_BK>,
+				 <&infracfg CLK_IFR_AP_MSDC0>;
+			clock-names = "source", "hclk", "source_cg",
+				      "bus_clk", "sys_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@112a0000 {
+			compatible = "mediatek,mt8365-eth";
+			reg = <0 0x112a0000 0 0x1000>;
+			mediatek,pericfg = <&infracfg>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&infracfg CLK_IFR_NIC_AXI>,
+				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		u3phy: t-phy@11cc0000 {
+			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11cc0000 0x9000>;
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	systimer: timer@10017000 {
+		compatible = "mediatek,mt8365-systimer", "mediatek,mt6765-timer";
+		reg = <0 0x10017000 0 0x100>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&system_clk>;
+		clock-names = "clk13m";
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
new file mode 100644
index 000000000..73339bb48
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pinfunc.h
@@ -0,0 +1,663 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ */
+#ifndef __DTS_MT8516_PINFUNC_H
+#define __DTS_MT8516_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8516_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8516_PIN_0_EINT0__FUNC_PWM_B (MTK_PIN_NO(0) | 1)
+#define MT8516_PIN_0_EINT0__FUNC_I2S2_BCK (MTK_PIN_NO(0) | 3)
+#define MT8516_PIN_0_EINT0__FUNC_EXT_TXD0 (MTK_PIN_NO(0) | 4)
+#define MT8516_PIN_0_EINT0__FUNC_SQICS (MTK_PIN_NO(0) | 6)
+#define MT8516_PIN_0_EINT0__FUNC_DBG_MON_A_6 (MTK_PIN_NO(0) | 7)
+
+#define MT8516_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8516_PIN_1_EINT1__FUNC_PWM_C (MTK_PIN_NO(1) | 1)
+#define MT8516_PIN_1_EINT1__FUNC_I2S2_DI (MTK_PIN_NO(1) | 3)
+#define MT8516_PIN_1_EINT1__FUNC_EXT_TXD1 (MTK_PIN_NO(1) | 4)
+#define MT8516_PIN_1_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(1) | 5)
+#define MT8516_PIN_1_EINT1__FUNC_SQISO (MTK_PIN_NO(1) | 6)
+#define MT8516_PIN_1_EINT1__FUNC_DBG_MON_A_7 (MTK_PIN_NO(1) | 7)
+
+#define MT8516_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8516_PIN_2_EINT2__FUNC_CLKM0 (MTK_PIN_NO(2) | 1)
+#define MT8516_PIN_2_EINT2__FUNC_I2S2_LRCK (MTK_PIN_NO(2) | 3)
+#define MT8516_PIN_2_EINT2__FUNC_EXT_TXD2 (MTK_PIN_NO(2) | 4)
+#define MT8516_PIN_2_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(2) | 5)
+#define MT8516_PIN_2_EINT2__FUNC_SQISI (MTK_PIN_NO(2) | 6)
+#define MT8516_PIN_2_EINT2__FUNC_DBG_MON_A_8 (MTK_PIN_NO(2) | 7)
+
+#define MT8516_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8516_PIN_3_EINT3__FUNC_CLKM1 (MTK_PIN_NO(3) | 1)
+#define MT8516_PIN_3_EINT3__FUNC_SPI_MI (MTK_PIN_NO(3) | 3)
+#define MT8516_PIN_3_EINT3__FUNC_EXT_TXD3 (MTK_PIN_NO(3) | 4)
+#define MT8516_PIN_3_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(3) | 5)
+#define MT8516_PIN_3_EINT3__FUNC_SQIWP (MTK_PIN_NO(3) | 6)
+#define MT8516_PIN_3_EINT3__FUNC_DBG_MON_A_9 (MTK_PIN_NO(3) | 7)
+
+#define MT8516_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8516_PIN_4_EINT4__FUNC_CLKM2 (MTK_PIN_NO(4) | 1)
+#define MT8516_PIN_4_EINT4__FUNC_SPI_MO (MTK_PIN_NO(4) | 3)
+#define MT8516_PIN_4_EINT4__FUNC_EXT_TXC (MTK_PIN_NO(4) | 4)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_TCK (MTK_PIN_NO(4) | 5)
+#define MT8516_PIN_4_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(4) | 6)
+#define MT8516_PIN_4_EINT4__FUNC_DBG_MON_A_10 (MTK_PIN_NO(4) | 7)
+
+#define MT8516_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8516_PIN_5_EINT5__FUNC_UCTS2 (MTK_PIN_NO(5) | 1)
+#define MT8516_PIN_5_EINT5__FUNC_SPI_CSB (MTK_PIN_NO(5) | 3)
+#define MT8516_PIN_5_EINT5__FUNC_EXT_RXER (MTK_PIN_NO(5) | 4)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(5) | 5)
+#define MT8516_PIN_5_EINT5__FUNC_CONN_TEST_CK (MTK_PIN_NO(5) | 6)
+#define MT8516_PIN_5_EINT5__FUNC_DBG_MON_A_11 (MTK_PIN_NO(5) | 7)
+
+#define MT8516_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8516_PIN_6_EINT6__FUNC_URTS2 (MTK_PIN_NO(6) | 1)
+#define MT8516_PIN_6_EINT6__FUNC_SPI_CLK (MTK_PIN_NO(6) | 3)
+#define MT8516_PIN_6_EINT6__FUNC_EXT_RXC (MTK_PIN_NO(6) | 4)
+#define MT8516_PIN_6_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(6) | 5)
+#define MT8516_PIN_6_EINT6__FUNC_DBG_MON_A_12 (MTK_PIN_NO(6) | 7)
+
+#define MT8516_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8516_PIN_7_EINT7__FUNC_SQIRST (MTK_PIN_NO(7) | 1)
+#define MT8516_PIN_7_EINT7__FUNC_SDA1_0 (MTK_PIN_NO(7) | 3)
+#define MT8516_PIN_7_EINT7__FUNC_EXT_RXDV (MTK_PIN_NO(7) | 4)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(7) | 5)
+#define MT8516_PIN_7_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(7) | 6)
+#define MT8516_PIN_7_EINT7__FUNC_DBG_MON_A_13 (MTK_PIN_NO(7) | 7)
+
+#define MT8516_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8516_PIN_8_EINT8__FUNC_SQICK (MTK_PIN_NO(8) | 1)
+#define MT8516_PIN_8_EINT8__FUNC_CLKM3 (MTK_PIN_NO(8) | 2)
+#define MT8516_PIN_8_EINT8__FUNC_SCL1_0 (MTK_PIN_NO(8) | 3)
+#define MT8516_PIN_8_EINT8__FUNC_EXT_RXD0 (MTK_PIN_NO(8) | 4)
+#define MT8516_PIN_8_EINT8__FUNC_ANT_SEL0 (MTK_PIN_NO(8) | 5)
+#define MT8516_PIN_8_EINT8__FUNC_DBG_MON_A_14 (MTK_PIN_NO(8) | 7)
+
+#define MT8516_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8516_PIN_9_EINT9__FUNC_CLKM4 (MTK_PIN_NO(9) | 1)
+#define MT8516_PIN_9_EINT9__FUNC_SDA2_0 (MTK_PIN_NO(9) | 2)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT8516_PIN_9_EINT9__FUNC_EXT_RXD1 (MTK_PIN_NO(9) | 4)
+#define MT8516_PIN_9_EINT9__FUNC_ANT_SEL1 (MTK_PIN_NO(9) | 5)
+#define MT8516_PIN_9_EINT9__FUNC_DBG_MON_A_15 (MTK_PIN_NO(9) | 7)
+
+#define MT8516_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8516_PIN_10_EINT10__FUNC_CLKM5 (MTK_PIN_NO(10) | 1)
+#define MT8516_PIN_10_EINT10__FUNC_SCL2_0 (MTK_PIN_NO(10) | 2)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(10) | 3)
+#define MT8516_PIN_10_EINT10__FUNC_EXT_RXD2 (MTK_PIN_NO(10) | 4)
+#define MT8516_PIN_10_EINT10__FUNC_ANT_SEL2 (MTK_PIN_NO(10) | 5)
+#define MT8516_PIN_10_EINT10__FUNC_DBG_MON_A_16 (MTK_PIN_NO(10) | 7)
+
+#define MT8516_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8516_PIN_11_EINT11__FUNC_CLKM4 (MTK_PIN_NO(11) | 1)
+#define MT8516_PIN_11_EINT11__FUNC_PWM_C (MTK_PIN_NO(11) | 2)
+#define MT8516_PIN_11_EINT11__FUNC_CONN_TEST_CK (MTK_PIN_NO(11) | 3)
+#define MT8516_PIN_11_EINT11__FUNC_ANT_SEL3 (MTK_PIN_NO(11) | 4)
+#define MT8516_PIN_11_EINT11__FUNC_EXT_RXD3 (MTK_PIN_NO(11) | 6)
+#define MT8516_PIN_11_EINT11__FUNC_DBG_MON_A_17 (MTK_PIN_NO(11) | 7)
+
+#define MT8516_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8516_PIN_12_EINT12__FUNC_CLKM5 (MTK_PIN_NO(12) | 1)
+#define MT8516_PIN_12_EINT12__FUNC_PWM_A (MTK_PIN_NO(12) | 2)
+#define MT8516_PIN_12_EINT12__FUNC_SPDIF_OUT (MTK_PIN_NO(12) | 3)
+#define MT8516_PIN_12_EINT12__FUNC_ANT_SEL4 (MTK_PIN_NO(12) | 4)
+#define MT8516_PIN_12_EINT12__FUNC_EXT_TXEN (MTK_PIN_NO(12) | 6)
+#define MT8516_PIN_12_EINT12__FUNC_DBG_MON_A_18 (MTK_PIN_NO(12) | 7)
+
+#define MT8516_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8516_PIN_13_EINT13__FUNC_TSF_IN (MTK_PIN_NO(13) | 3)
+#define MT8516_PIN_13_EINT13__FUNC_ANT_SEL5 (MTK_PIN_NO(13) | 4)
+#define MT8516_PIN_13_EINT13__FUNC_SPDIF_IN (MTK_PIN_NO(13) | 6)
+#define MT8516_PIN_13_EINT13__FUNC_DBG_MON_A_19 (MTK_PIN_NO(13) | 7)
+
+#define MT8516_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8516_PIN_14_EINT14__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(14) | 2)
+#define MT8516_PIN_14_EINT14__FUNC_TDM_RX_MCK (MTK_PIN_NO(14) | 3)
+#define MT8516_PIN_14_EINT14__FUNC_ANT_SEL1 (MTK_PIN_NO(14) | 4)
+#define MT8516_PIN_14_EINT14__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(14) | 5)
+#define MT8516_PIN_14_EINT14__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8516_PIN_14_EINT14__FUNC_DBG_MON_B_8 (MTK_PIN_NO(14) | 7)
+
+#define MT8516_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8516_PIN_15_EINT15__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(15) | 2)
+#define MT8516_PIN_15_EINT15__FUNC_TDM_RX_BCK (MTK_PIN_NO(15) | 3)
+#define MT8516_PIN_15_EINT15__FUNC_ANT_SEL2 (MTK_PIN_NO(15) | 4)
+#define MT8516_PIN_15_EINT15__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(15) | 5)
+#define MT8516_PIN_15_EINT15__FUNC_NCEB1 (MTK_PIN_NO(15) | 6)
+#define MT8516_PIN_15_EINT15__FUNC_DBG_MON_B_9 (MTK_PIN_NO(15) | 7)
+
+#define MT8516_PIN_16_EINT16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8516_PIN_16_EINT16__FUNC_I2S_8CH_BCK (MTK_PIN_NO(16) | 2)
+#define MT8516_PIN_16_EINT16__FUNC_TDM_RX_LRCK (MTK_PIN_NO(16) | 3)
+#define MT8516_PIN_16_EINT16__FUNC_ANT_SEL3 (MTK_PIN_NO(16) | 4)
+#define MT8516_PIN_16_EINT16__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(16) | 5)
+#define MT8516_PIN_16_EINT16__FUNC_NCEB0 (MTK_PIN_NO(16) | 6)
+#define MT8516_PIN_16_EINT16__FUNC_DBG_MON_B_10 (MTK_PIN_NO(16) | 7)
+
+#define MT8516_PIN_17_EINT17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8516_PIN_17_EINT17__FUNC_I2S_8CH_MCK (MTK_PIN_NO(17) | 2)
+#define MT8516_PIN_17_EINT17__FUNC_TDM_RX_DI (MTK_PIN_NO(17) | 3)
+#define MT8516_PIN_17_EINT17__FUNC_IDDIG (MTK_PIN_NO(17) | 4)
+#define MT8516_PIN_17_EINT17__FUNC_ANT_SEL4 (MTK_PIN_NO(17) | 5)
+#define MT8516_PIN_17_EINT17__FUNC_NREB (MTK_PIN_NO(17) | 6)
+#define MT8516_PIN_17_EINT17__FUNC_DBG_MON_B_11 (MTK_PIN_NO(17) | 7)
+
+#define MT8516_PIN_18_EINT18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8516_PIN_18_EINT18__FUNC_USB_DRVVBUS (MTK_PIN_NO(18) | 2)
+#define MT8516_PIN_18_EINT18__FUNC_I2S3_LRCK (MTK_PIN_NO(18) | 3)
+#define MT8516_PIN_18_EINT18__FUNC_CLKM1 (MTK_PIN_NO(18) | 4)
+#define MT8516_PIN_18_EINT18__FUNC_ANT_SEL3 (MTK_PIN_NO(18) | 5)
+#define MT8516_PIN_18_EINT18__FUNC_I2S2_BCK (MTK_PIN_NO(18) | 6)
+#define MT8516_PIN_18_EINT18__FUNC_DBG_MON_A_20 (MTK_PIN_NO(18) | 7)
+
+#define MT8516_PIN_19_EINT19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8516_PIN_19_EINT19__FUNC_UCTS1 (MTK_PIN_NO(19) | 1)
+#define MT8516_PIN_19_EINT19__FUNC_IDDIG (MTK_PIN_NO(19) | 2)
+#define MT8516_PIN_19_EINT19__FUNC_I2S3_BCK (MTK_PIN_NO(19) | 3)
+#define MT8516_PIN_19_EINT19__FUNC_CLKM2 (MTK_PIN_NO(19) | 4)
+#define MT8516_PIN_19_EINT19__FUNC_ANT_SEL4 (MTK_PIN_NO(19) | 5)
+#define MT8516_PIN_19_EINT19__FUNC_I2S2_DI (MTK_PIN_NO(19) | 6)
+#define MT8516_PIN_19_EINT19__FUNC_DBG_MON_A_21 (MTK_PIN_NO(19) | 7)
+
+#define MT8516_PIN_20_EINT20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8516_PIN_20_EINT20__FUNC_URTS1 (MTK_PIN_NO(20) | 1)
+#define MT8516_PIN_20_EINT20__FUNC_I2S3_DO (MTK_PIN_NO(20) | 3)
+#define MT8516_PIN_20_EINT20__FUNC_CLKM3 (MTK_PIN_NO(20) | 4)
+#define MT8516_PIN_20_EINT20__FUNC_ANT_SEL5 (MTK_PIN_NO(20) | 5)
+#define MT8516_PIN_20_EINT20__FUNC_I2S2_LRCK (MTK_PIN_NO(20) | 6)
+#define MT8516_PIN_20_EINT20__FUNC_DBG_MON_A_22 (MTK_PIN_NO(20) | 7)
+
+#define MT8516_PIN_21_EINT21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8516_PIN_21_EINT21__FUNC_NRNB (MTK_PIN_NO(21) | 1)
+#define MT8516_PIN_21_EINT21__FUNC_ANT_SEL0 (MTK_PIN_NO(21) | 2)
+#define MT8516_PIN_21_EINT21__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(21) | 3)
+#define MT8516_PIN_21_EINT21__FUNC_DBG_MON_B_31 (MTK_PIN_NO(21) | 7)
+
+#define MT8516_PIN_22_EINT22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8516_PIN_22_EINT22__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(22) | 2)
+#define MT8516_PIN_22_EINT22__FUNC_TSF_IN (MTK_PIN_NO(22) | 3)
+#define MT8516_PIN_22_EINT22__FUNC_USB_DRVVBUS (MTK_PIN_NO(22) | 4)
+#define MT8516_PIN_22_EINT22__FUNC_SPDIF_OUT (MTK_PIN_NO(22) | 5)
+#define MT8516_PIN_22_EINT22__FUNC_NRE_C (MTK_PIN_NO(22) | 6)
+#define MT8516_PIN_22_EINT22__FUNC_DBG_MON_B_12 (MTK_PIN_NO(22) | 7)
+
+#define MT8516_PIN_23_EINT23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8516_PIN_23_EINT23__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(23) | 2)
+#define MT8516_PIN_23_EINT23__FUNC_CLKM0 (MTK_PIN_NO(23) | 3)
+#define MT8516_PIN_23_EINT23__FUNC_IR (MTK_PIN_NO(23) | 4)
+#define MT8516_PIN_23_EINT23__FUNC_SPDIF_IN (MTK_PIN_NO(23) | 5)
+#define MT8516_PIN_23_EINT23__FUNC_NDQS_C (MTK_PIN_NO(23) | 6)
+#define MT8516_PIN_23_EINT23__FUNC_DBG_MON_B_13 (MTK_PIN_NO(23) | 7)
+
+#define MT8516_PIN_24_EINT24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8516_PIN_24_EINT24__FUNC_ANT_SEL1 (MTK_PIN_NO(24) | 3)
+#define MT8516_PIN_24_EINT24__FUNC_UCTS2 (MTK_PIN_NO(24) | 4)
+#define MT8516_PIN_24_EINT24__FUNC_PWM_A (MTK_PIN_NO(24) | 5)
+#define MT8516_PIN_24_EINT24__FUNC_I2S0_MCK (MTK_PIN_NO(24) | 6)
+#define MT8516_PIN_24_EINT24__FUNC_DBG_MON_A_0 (MTK_PIN_NO(24) | 7)
+
+#define MT8516_PIN_25_EINT25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8516_PIN_25_EINT25__FUNC_ANT_SEL0 (MTK_PIN_NO(25) | 3)
+#define MT8516_PIN_25_EINT25__FUNC_URTS2 (MTK_PIN_NO(25) | 4)
+#define MT8516_PIN_25_EINT25__FUNC_PWM_B (MTK_PIN_NO(25) | 5)
+#define MT8516_PIN_25_EINT25__FUNC_I2S_8CH_MCK (MTK_PIN_NO(25) | 6)
+#define MT8516_PIN_25_EINT25__FUNC_DBG_MON_A_1 (MTK_PIN_NO(25) | 7)
+
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(26) | 1)
+#define MT8516_PIN_26_PWRAP_SPI0_MI__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(26) | 2)
+
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MI (MTK_PIN_NO(27) | 1)
+#define MT8516_PIN_27_PWRAP_SPI0_MO__FUNC_PWRAP_SPI0_MO (MTK_PIN_NO(27) | 2)
+
+#define MT8516_PIN_28_PWRAP_INT__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S0_MCK (MTK_PIN_NO(28) | 1)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S_8CH_MCK (MTK_PIN_NO(28) | 4)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S2_MCK (MTK_PIN_NO(28) | 5)
+#define MT8516_PIN_28_PWRAP_INT__FUNC_I2S3_MCK (MTK_PIN_NO(28) | 6)
+
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8516_PIN_29_PWRAP_SPI0_CK__FUNC_PWRAP_SPI0_CK (MTK_PIN_NO(29) | 1)
+
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8516_PIN_30_PWRAP_SPI0_CSN__FUNC_PWRAP_SPI0_CSN (MTK_PIN_NO(30) | 1)
+
+#define MT8516_PIN_31_RTC32K_CK__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8516_PIN_31_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(31) | 1)
+
+#define MT8516_PIN_32_WATCHDOG__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8516_PIN_32_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(32) | 1)
+
+#define MT8516_PIN_33_SRCLKENA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8516_PIN_33_SRCLKENA__FUNC_SRCLKENA0 (MTK_PIN_NO(33) | 1)
+
+#define MT8516_PIN_34_URXD2__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8516_PIN_34_URXD2__FUNC_URXD2 (MTK_PIN_NO(34) | 1)
+#define MT8516_PIN_34_URXD2__FUNC_UTXD2 (MTK_PIN_NO(34) | 3)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_SCL (MTK_PIN_NO(34) | 4)
+#define MT8516_PIN_34_URXD2__FUNC_I2S2_MCK (MTK_PIN_NO(34) | 6)
+#define MT8516_PIN_34_URXD2__FUNC_DBG_MON_B_0 (MTK_PIN_NO(34) | 7)
+
+#define MT8516_PIN_35_UTXD2__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8516_PIN_35_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(35) | 1)
+#define MT8516_PIN_35_UTXD2__FUNC_URXD2 (MTK_PIN_NO(35) | 3)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_SDA (MTK_PIN_NO(35) | 4)
+#define MT8516_PIN_35_UTXD2__FUNC_I2S3_MCK (MTK_PIN_NO(35) | 6)
+#define MT8516_PIN_35_UTXD2__FUNC_DBG_MON_B_1 (MTK_PIN_NO(35) | 7)
+
+#define MT8516_PIN_36_MRG_CLK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8516_PIN_36_MRG_CLK__FUNC_MRG_CLK (MTK_PIN_NO(36) | 1)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(36) | 3)
+#define MT8516_PIN_36_MRG_CLK__FUNC_I2S3_BCK (MTK_PIN_NO(36) | 4)
+#define MT8516_PIN_36_MRG_CLK__FUNC_PCM0_CLK (MTK_PIN_NO(36) | 5)
+#define MT8516_PIN_36_MRG_CLK__FUNC_IR (MTK_PIN_NO(36) | 6)
+#define MT8516_PIN_36_MRG_CLK__FUNC_DBG_MON_A_2 (MTK_PIN_NO(36) | 7)
+
+#define MT8516_PIN_37_MRG_SYNC__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(37) | 1)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S0_LRCK (MTK_PIN_NO(37) | 3)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_I2S3_LRCK (MTK_PIN_NO(37) | 4)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(37) | 5)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_EXT_COL (MTK_PIN_NO(37) | 6)
+#define MT8516_PIN_37_MRG_SYNC__FUNC_DBG_MON_A_3 (MTK_PIN_NO(37) | 7)
+
+#define MT8516_PIN_38_MRG_DI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8516_PIN_38_MRG_DI__FUNC_MRG_DI (MTK_PIN_NO(38) | 1)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S0_DI (MTK_PIN_NO(38) | 3)
+#define MT8516_PIN_38_MRG_DI__FUNC_I2S3_DO (MTK_PIN_NO(38) | 4)
+#define MT8516_PIN_38_MRG_DI__FUNC_PCM0_DI (MTK_PIN_NO(38) | 5)
+#define MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO (MTK_PIN_NO(38) | 6)
+#define MT8516_PIN_38_MRG_DI__FUNC_DBG_MON_A_4 (MTK_PIN_NO(38) | 7)
+
+#define MT8516_PIN_39_MRG_DO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8516_PIN_39_MRG_DO__FUNC_MRG_DO (MTK_PIN_NO(39) | 1)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S0_MCK (MTK_PIN_NO(39) | 3)
+#define MT8516_PIN_39_MRG_DO__FUNC_I2S3_MCK (MTK_PIN_NO(39) | 4)
+#define MT8516_PIN_39_MRG_DO__FUNC_PCM0_DO (MTK_PIN_NO(39) | 5)
+#define MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC (MTK_PIN_NO(39) | 6)
+#define MT8516_PIN_39_MRG_DO__FUNC_DBG_MON_A_5 (MTK_PIN_NO(39) | 7)
+
+#define MT8516_PIN_40_KPROW0__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8516_PIN_40_KPROW0__FUNC_KPROW0 (MTK_PIN_NO(40) | 1)
+#define MT8516_PIN_40_KPROW0__FUNC_DBG_MON_B_4 (MTK_PIN_NO(40) | 7)
+
+#define MT8516_PIN_41_KPROW1__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8516_PIN_41_KPROW1__FUNC_KPROW1 (MTK_PIN_NO(41) | 1)
+#define MT8516_PIN_41_KPROW1__FUNC_IDDIG (MTK_PIN_NO(41) | 2)
+#define MT8516_PIN_41_KPROW1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(41) | 3)
+#define MT8516_PIN_41_KPROW1__FUNC_DBG_MON_B_5 (MTK_PIN_NO(41) | 7)
+
+#define MT8516_PIN_42_KPCOL0__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8516_PIN_42_KPCOL0__FUNC_KPCOL0 (MTK_PIN_NO(42) | 1)
+#define MT8516_PIN_42_KPCOL0__FUNC_DBG_MON_B_6 (MTK_PIN_NO(42) | 7)
+
+#define MT8516_PIN_43_KPCOL1__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8516_PIN_43_KPCOL1__FUNC_KPCOL1 (MTK_PIN_NO(43) | 1)
+#define MT8516_PIN_43_KPCOL1__FUNC_USB_DRVVBUS (MTK_PIN_NO(43) | 2)
+#define MT8516_PIN_43_KPCOL1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(43) | 3)
+#define MT8516_PIN_43_KPCOL1__FUNC_TSF_IN (MTK_PIN_NO(43) | 4)
+#define MT8516_PIN_43_KPCOL1__FUNC_DBG_MON_B_7 (MTK_PIN_NO(43) | 7)
+
+#define MT8516_PIN_44_JTMS__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8516_PIN_44_JTMS__FUNC_JTMS (MTK_PIN_NO(44) | 1)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(44) | 2)
+#define MT8516_PIN_44_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(44) | 3)
+#define MT8516_PIN_44_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(44) | 5)
+#define MT8516_PIN_44_JTMS__FUNC_UDI_TMS_XI (MTK_PIN_NO(44) | 6)
+
+#define MT8516_PIN_45_JTCK__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8516_PIN_45_JTCK__FUNC_JTCK (MTK_PIN_NO(45) | 1)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_TCK (MTK_PIN_NO(45) | 2)
+#define MT8516_PIN_45_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(45) | 3)
+
+#define MT8516_PIN_46_JTDI__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8516_PIN_46_JTDI__FUNC_JTDI (MTK_PIN_NO(46) | 1)
+#define MT8516_PIN_46_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(46) | 2)
+
+#define MT8516_PIN_47_JTDO__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8516_PIN_47_JTDO__FUNC_JTDO (MTK_PIN_NO(47) | 1)
+#define MT8516_PIN_47_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(47) | 2)
+
+#define MT8516_PIN_48_SPI_CS__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8516_PIN_48_SPI_CS__FUNC_SPI_CSB (MTK_PIN_NO(48) | 1)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S0_DI (MTK_PIN_NO(48) | 3)
+#define MT8516_PIN_48_SPI_CS__FUNC_I2S2_BCK (MTK_PIN_NO(48) | 4)
+#define MT8516_PIN_48_SPI_CS__FUNC_DBG_MON_A_23 (MTK_PIN_NO(48) | 7)
+
+#define MT8516_PIN_49_SPI_CK__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8516_PIN_49_SPI_CK__FUNC_SPI_CLK (MTK_PIN_NO(49) | 1)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S0_LRCK (MTK_PIN_NO(49) | 3)
+#define MT8516_PIN_49_SPI_CK__FUNC_I2S2_DI (MTK_PIN_NO(49) | 4)
+#define MT8516_PIN_49_SPI_CK__FUNC_DBG_MON_A_24 (MTK_PIN_NO(49) | 7)
+
+#define MT8516_PIN_50_SPI_MI__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MI (MTK_PIN_NO(50) | 1)
+#define MT8516_PIN_50_SPI_MI__FUNC_SPI_MO (MTK_PIN_NO(50) | 2)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S0_BCK (MTK_PIN_NO(50) | 3)
+#define MT8516_PIN_50_SPI_MI__FUNC_I2S2_LRCK (MTK_PIN_NO(50) | 4)
+#define MT8516_PIN_50_SPI_MI__FUNC_DBG_MON_A_25 (MTK_PIN_NO(50) | 7)
+
+#define MT8516_PIN_51_SPI_MO__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MO (MTK_PIN_NO(51) | 1)
+#define MT8516_PIN_51_SPI_MO__FUNC_SPI_MI (MTK_PIN_NO(51) | 2)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S0_MCK (MTK_PIN_NO(51) | 3)
+#define MT8516_PIN_51_SPI_MO__FUNC_I2S2_MCK (MTK_PIN_NO(51) | 4)
+#define MT8516_PIN_51_SPI_MO__FUNC_DBG_MON_A_26 (MTK_PIN_NO(51) | 7)
+
+#define MT8516_PIN_52_SDA1__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8516_PIN_52_SDA1__FUNC_SDA1_0 (MTK_PIN_NO(52) | 1)
+
+#define MT8516_PIN_53_SCL1__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8516_PIN_53_SCL1__FUNC_SCL1_0 (MTK_PIN_NO(53) | 1)
+
+#define MT8516_PIN_54_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8516_PIN_54_GPIO54__FUNC_PWM_B (MTK_PIN_NO(54) | 2)
+#define MT8516_PIN_54_GPIO54__FUNC_DBG_MON_B_2 (MTK_PIN_NO(54) | 7)
+
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S0_DI (MTK_PIN_NO(55) | 1)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_UCTS0 (MTK_PIN_NO(55) | 2)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S3_DO (MTK_PIN_NO(55) | 3)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(55) | 4)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_PWM_A (MTK_PIN_NO(55) | 5)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_I2S2_BCK (MTK_PIN_NO(55) | 6)
+#define MT8516_PIN_55_I2S_DATA_IN__FUNC_DBG_MON_A_28 (MTK_PIN_NO(55) | 7)
+
+#define MT8516_PIN_56_I2S_LRCK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(56) | 1)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S3_LRCK (MTK_PIN_NO(56) | 3)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(56) | 4)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_PWM_B (MTK_PIN_NO(56) | 5)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_I2S2_DI (MTK_PIN_NO(56) | 6)
+#define MT8516_PIN_56_I2S_LRCK__FUNC_DBG_MON_A_29 (MTK_PIN_NO(56) | 7)
+
+#define MT8516_PIN_57_I2S_BCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(57) | 1)
+#define MT8516_PIN_57_I2S_BCK__FUNC_URTS0 (MTK_PIN_NO(57) | 2)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S3_BCK (MTK_PIN_NO(57) | 3)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S_8CH_BCK (MTK_PIN_NO(57) | 4)
+#define MT8516_PIN_57_I2S_BCK__FUNC_PWM_C (MTK_PIN_NO(57) | 5)
+#define MT8516_PIN_57_I2S_BCK__FUNC_I2S2_LRCK (MTK_PIN_NO(57) | 6)
+#define MT8516_PIN_57_I2S_BCK__FUNC_DBG_MON_A_30 (MTK_PIN_NO(57) | 7)
+
+#define MT8516_PIN_58_SDA0__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8516_PIN_58_SDA0__FUNC_SDA0_0 (MTK_PIN_NO(58) | 1)
+
+#define MT8516_PIN_59_SCL0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8516_PIN_59_SCL0__FUNC_SCL0_0 (MTK_PIN_NO(59) | 1)
+
+#define MT8516_PIN_60_SDA2__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8516_PIN_60_SDA2__FUNC_SDA2_0 (MTK_PIN_NO(60) | 1)
+#define MT8516_PIN_60_SDA2__FUNC_PWM_B (MTK_PIN_NO(60) | 2)
+
+#define MT8516_PIN_61_SCL2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8516_PIN_61_SCL2__FUNC_SCL2_0 (MTK_PIN_NO(61) | 1)
+#define MT8516_PIN_61_SCL2__FUNC_PWM_C (MTK_PIN_NO(61) | 2)
+
+#define MT8516_PIN_62_URXD0__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8516_PIN_62_URXD0__FUNC_URXD0 (MTK_PIN_NO(62) | 1)
+#define MT8516_PIN_62_URXD0__FUNC_UTXD0 (MTK_PIN_NO(62) | 2)
+
+#define MT8516_PIN_63_UTXD0__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8516_PIN_63_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(63) | 1)
+#define MT8516_PIN_63_UTXD0__FUNC_URXD0 (MTK_PIN_NO(63) | 2)
+
+#define MT8516_PIN_64_URXD1__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8516_PIN_64_URXD1__FUNC_URXD1 (MTK_PIN_NO(64) | 1)
+#define MT8516_PIN_64_URXD1__FUNC_UTXD1 (MTK_PIN_NO(64) | 2)
+#define MT8516_PIN_64_URXD1__FUNC_DBG_MON_A_27 (MTK_PIN_NO(64) | 7)
+
+#define MT8516_PIN_65_UTXD1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8516_PIN_65_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(65) | 1)
+#define MT8516_PIN_65_UTXD1__FUNC_URXD1 (MTK_PIN_NO(65) | 2)
+#define MT8516_PIN_65_UTXD1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(65) | 7)
+
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(68) | 1)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S_8CH_DO4 (MTK_PIN_NO(68) | 2)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_SDA1_0 (MTK_PIN_NO(68) | 3)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_USB_SDA (MTK_PIN_NO(68) | 5)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_I2S3_BCK (MTK_PIN_NO(68) | 6)
+#define MT8516_PIN_68_MSDC2_CMD__FUNC_DBG_MON_B_15 (MTK_PIN_NO(68) | 7)
+
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(69) | 1)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S_8CH_DO3 (MTK_PIN_NO(69) | 2)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_SCL1_0 (MTK_PIN_NO(69) | 3)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_USB_SCL (MTK_PIN_NO(69) | 5)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_I2S3_LRCK (MTK_PIN_NO(69) | 6)
+#define MT8516_PIN_69_MSDC2_CLK__FUNC_DBG_MON_B_16 (MTK_PIN_NO(69) | 7)
+
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(70) | 1)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S_8CH_DO2 (MTK_PIN_NO(70) | 2)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_UTXD0 (MTK_PIN_NO(70) | 5)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_I2S3_DO (MTK_PIN_NO(70) | 6)
+#define MT8516_PIN_70_MSDC2_DAT0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(70) | 7)
+
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(71) | 1)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S_8CH_DO1 (MTK_PIN_NO(71) | 2)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_A (MTK_PIN_NO(71) | 3)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_I2S3_MCK (MTK_PIN_NO(71) | 4)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_URXD0 (MTK_PIN_NO(71) | 5)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_PWM_B (MTK_PIN_NO(71) | 6)
+#define MT8516_PIN_71_MSDC2_DAT1__FUNC_DBG_MON_B_18 (MTK_PIN_NO(71) | 7)
+
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(72) | 1)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_I2S_8CH_LRCK (MTK_PIN_NO(72) | 2)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_SDA2_0 (MTK_PIN_NO(72) | 3)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_UTXD1 (MTK_PIN_NO(72) | 5)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_PWM_C (MTK_PIN_NO(72) | 6)
+#define MT8516_PIN_72_MSDC2_DAT2__FUNC_DBG_MON_B_19 (MTK_PIN_NO(72) | 7)
+
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(73) | 1)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_I2S_8CH_BCK (MTK_PIN_NO(73) | 2)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_SCL2_0 (MTK_PIN_NO(73) | 3)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(73) | 4)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_URXD1 (MTK_PIN_NO(73) | 5)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_PWM_A (MTK_PIN_NO(73) | 6)
+#define MT8516_PIN_73_MSDC2_DAT3__FUNC_DBG_MON_B_20 (MTK_PIN_NO(73) | 7)
+
+#define MT8516_PIN_74_TDN3__FUNC_GPI74 (MTK_PIN_NO(74) | 0)
+#define MT8516_PIN_74_TDN3__FUNC_TDN3 (MTK_PIN_NO(74) | 1)
+
+#define MT8516_PIN_75_TDP3__FUNC_GPI75 (MTK_PIN_NO(75) | 0)
+#define MT8516_PIN_75_TDP3__FUNC_TDP3 (MTK_PIN_NO(75) | 1)
+
+#define MT8516_PIN_76_TDN2__FUNC_GPI76 (MTK_PIN_NO(76) | 0)
+#define MT8516_PIN_76_TDN2__FUNC_TDN2 (MTK_PIN_NO(76) | 1)
+
+#define MT8516_PIN_77_TDP2__FUNC_GPI77 (MTK_PIN_NO(77) | 0)
+#define MT8516_PIN_77_TDP2__FUNC_TDP2 (MTK_PIN_NO(77) | 1)
+
+#define MT8516_PIN_78_TCN__FUNC_GPI78 (MTK_PIN_NO(78) | 0)
+#define MT8516_PIN_78_TCN__FUNC_TCN (MTK_PIN_NO(78) | 1)
+
+#define MT8516_PIN_79_TCP__FUNC_GPI79 (MTK_PIN_NO(79) | 0)
+#define MT8516_PIN_79_TCP__FUNC_TCP (MTK_PIN_NO(79) | 1)
+
+#define MT8516_PIN_80_TDN1__FUNC_GPI80 (MTK_PIN_NO(80) | 0)
+#define MT8516_PIN_80_TDN1__FUNC_TDN1 (MTK_PIN_NO(80) | 1)
+
+#define MT8516_PIN_81_TDP1__FUNC_GPI81 (MTK_PIN_NO(81) | 0)
+#define MT8516_PIN_81_TDP1__FUNC_TDP1 (MTK_PIN_NO(81) | 1)
+
+#define MT8516_PIN_82_TDN0__FUNC_GPI82 (MTK_PIN_NO(82) | 0)
+#define MT8516_PIN_82_TDN0__FUNC_TDN0 (MTK_PIN_NO(82) | 1)
+
+#define MT8516_PIN_83_TDP0__FUNC_GPI83 (MTK_PIN_NO(83) | 0)
+#define MT8516_PIN_83_TDP0__FUNC_TDP0 (MTK_PIN_NO(83) | 1)
+
+#define MT8516_PIN_84_RDN0__FUNC_GPI84 (MTK_PIN_NO(84) | 0)
+#define MT8516_PIN_84_RDN0__FUNC_RDN0 (MTK_PIN_NO(84) | 1)
+
+#define MT8516_PIN_85_RDP0__FUNC_GPI85 (MTK_PIN_NO(85) | 0)
+#define MT8516_PIN_85_RDP0__FUNC_RDP0 (MTK_PIN_NO(85) | 1)
+
+#define MT8516_PIN_86_RDN1__FUNC_GPI86 (MTK_PIN_NO(86) | 0)
+#define MT8516_PIN_86_RDN1__FUNC_RDN1 (MTK_PIN_NO(86) | 1)
+
+#define MT8516_PIN_87_RDP1__FUNC_GPI87 (MTK_PIN_NO(87) | 0)
+#define MT8516_PIN_87_RDP1__FUNC_RDP1 (MTK_PIN_NO(87) | 1)
+
+#define MT8516_PIN_88_RCN__FUNC_GPI88 (MTK_PIN_NO(88) | 0)
+#define MT8516_PIN_88_RCN__FUNC_RCN (MTK_PIN_NO(88) | 1)
+
+#define MT8516_PIN_89_RCP__FUNC_GPI89 (MTK_PIN_NO(89) | 0)
+#define MT8516_PIN_89_RCP__FUNC_RCP (MTK_PIN_NO(89) | 1)
+
+#define MT8516_PIN_90_RDN2__FUNC_GPI90 (MTK_PIN_NO(90) | 0)
+#define MT8516_PIN_90_RDN2__FUNC_RDN2 (MTK_PIN_NO(90) | 1)
+#define MT8516_PIN_90_RDN2__FUNC_CMDAT8 (MTK_PIN_NO(90) | 2)
+
+#define MT8516_PIN_91_RDP2__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT8516_PIN_91_RDP2__FUNC_RDP2 (MTK_PIN_NO(91) | 1)
+#define MT8516_PIN_91_RDP2__FUNC_CMDAT9 (MTK_PIN_NO(91) | 2)
+
+#define MT8516_PIN_92_RDN3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT8516_PIN_92_RDN3__FUNC_RDN3 (MTK_PIN_NO(92) | 1)
+#define MT8516_PIN_92_RDN3__FUNC_CMDAT4 (MTK_PIN_NO(92) | 2)
+
+#define MT8516_PIN_93_RDP3__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT8516_PIN_93_RDP3__FUNC_RDP3 (MTK_PIN_NO(93) | 1)
+#define MT8516_PIN_93_RDP3__FUNC_CMDAT5 (MTK_PIN_NO(93) | 2)
+
+#define MT8516_PIN_94_RCN_A__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT8516_PIN_94_RCN_A__FUNC_RCN_A (MTK_PIN_NO(94) | 1)
+#define MT8516_PIN_94_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(94) | 2)
+
+#define MT8516_PIN_95_RCP_A__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT8516_PIN_95_RCP_A__FUNC_RCP_A (MTK_PIN_NO(95) | 1)
+#define MT8516_PIN_95_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(95) | 2)
+
+#define MT8516_PIN_96_RDN1_A__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT8516_PIN_96_RDN1_A__FUNC_RDN1_A (MTK_PIN_NO(96) | 1)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMDAT2 (MTK_PIN_NO(96) | 2)
+#define MT8516_PIN_96_RDN1_A__FUNC_CMCSD2 (MTK_PIN_NO(96) | 3)
+
+#define MT8516_PIN_97_RDP1_A__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT8516_PIN_97_RDP1_A__FUNC_RDP1_A (MTK_PIN_NO(97) | 1)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMDAT3 (MTK_PIN_NO(97) | 2)
+#define MT8516_PIN_97_RDP1_A__FUNC_CMCSD3 (MTK_PIN_NO(97) | 3)
+
+#define MT8516_PIN_98_RDN0_A__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT8516_PIN_98_RDN0_A__FUNC_RDN0_A (MTK_PIN_NO(98) | 1)
+#define MT8516_PIN_98_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(98) | 2)
+
+#define MT8516_PIN_99_RDP0_A__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT8516_PIN_99_RDP0_A__FUNC_RDP0_A (MTK_PIN_NO(99) | 1)
+#define MT8516_PIN_99_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(99) | 2)
+
+#define MT8516_PIN_100_CMDAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMDAT0 (MTK_PIN_NO(100) | 1)
+#define MT8516_PIN_100_CMDAT0__FUNC_CMCSD0 (MTK_PIN_NO(100) | 2)
+#define MT8516_PIN_100_CMDAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(100) | 3)
+#define MT8516_PIN_100_CMDAT0__FUNC_TDM_RX_MCK (MTK_PIN_NO(100) | 5)
+#define MT8516_PIN_100_CMDAT0__FUNC_DBG_MON_B_21 (MTK_PIN_NO(100) | 7)
+
+#define MT8516_PIN_101_CMDAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMDAT1 (MTK_PIN_NO(101) | 1)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMCSD1 (MTK_PIN_NO(101) | 2)
+#define MT8516_PIN_101_CMDAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(101) | 3)
+#define MT8516_PIN_101_CMDAT1__FUNC_CMFLASH (MTK_PIN_NO(101) | 4)
+#define MT8516_PIN_101_CMDAT1__FUNC_TDM_RX_BCK (MTK_PIN_NO(101) | 5)
+#define MT8516_PIN_101_CMDAT1__FUNC_DBG_MON_B_22 (MTK_PIN_NO(101) | 7)
+
+#define MT8516_PIN_102_CMMCLK__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8516_PIN_102_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(102) | 1)
+#define MT8516_PIN_102_CMMCLK__FUNC_ANT_SEL4 (MTK_PIN_NO(102) | 3)
+#define MT8516_PIN_102_CMMCLK__FUNC_TDM_RX_LRCK (MTK_PIN_NO(102) | 5)
+#define MT8516_PIN_102_CMMCLK__FUNC_DBG_MON_B_23 (MTK_PIN_NO(102) | 7)
+
+#define MT8516_PIN_103_CMPCLK__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(103) | 1)
+#define MT8516_PIN_103_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(103) | 2)
+#define MT8516_PIN_103_CMPCLK__FUNC_ANT_SEL5 (MTK_PIN_NO(103) | 3)
+#define MT8516_PIN_103_CMPCLK__FUNC_TDM_RX_DI (MTK_PIN_NO(103) | 5)
+#define MT8516_PIN_103_CMPCLK__FUNC_DBG_MON_B_24 (MTK_PIN_NO(103) | 7)
+
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(104) | 1)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_SQICS (MTK_PIN_NO(104) | 4)
+#define MT8516_PIN_104_MSDC1_CMD__FUNC_DBG_MON_B_25 (MTK_PIN_NO(104) | 7)
+
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(105) | 1)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_SQISO (MTK_PIN_NO(105) | 4)
+#define MT8516_PIN_105_MSDC1_CLK__FUNC_DBG_MON_B_26 (MTK_PIN_NO(105) | 7)
+
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(106) | 1)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_SQISI (MTK_PIN_NO(106) | 4)
+#define MT8516_PIN_106_MSDC1_DAT0__FUNC_DBG_MON_B_27 (MTK_PIN_NO(106) | 7)
+
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(107) | 1)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_SQIWP (MTK_PIN_NO(107) | 4)
+#define MT8516_PIN_107_MSDC1_DAT1__FUNC_DBG_MON_B_28 (MTK_PIN_NO(107) | 7)
+
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(108) | 1)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_SQIRST (MTK_PIN_NO(108) | 4)
+#define MT8516_PIN_108_MSDC1_DAT2__FUNC_DBG_MON_B_29 (MTK_PIN_NO(108) | 7)
+
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(109) | 1)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_SQICK (MTK_PIN_NO(109) | 4)
+#define MT8516_PIN_109_MSDC1_DAT3__FUNC_DBG_MON_B_30 (MTK_PIN_NO(109) | 7)
+
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(110) | 1)
+#define MT8516_PIN_110_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(110) | 4)
+
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(111) | 1)
+#define MT8516_PIN_111_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(111) | 4)
+
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(112) | 1)
+#define MT8516_PIN_112_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(112) | 4)
+
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(113) | 1)
+#define MT8516_PIN_113_MSDC0_DAT4__FUNC_NLD3 (MTK_PIN_NO(113) | 4)
+
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(114) | 1)
+#define MT8516_PIN_114_MSDC0_RSTB__FUNC_NLD0 (MTK_PIN_NO(114) | 4)
+
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(115) | 1)
+#define MT8516_PIN_115_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(115) | 4)
+
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(116) | 1)
+#define MT8516_PIN_116_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(116) | 4)
+
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(117) | 1)
+#define MT8516_PIN_117_MSDC0_DAT3__FUNC_NLD1 (MTK_PIN_NO(117) | 4)
+
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(118) | 1)
+#define MT8516_PIN_118_MSDC0_DAT2__FUNC_NLD5 (MTK_PIN_NO(118) | 4)
+
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(119) | 1)
+#define MT8516_PIN_119_MSDC0_DAT1__FUNC_NLD8 (MTK_PIN_NO(119) | 4)
+
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(120) | 1)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(120) | 4)
+#define MT8516_PIN_120_MSDC0_DAT0__FUNC_NLD2 (MTK_PIN_NO(120) | 5)
+
+#endif				/* __DTS_MT8516_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
new file mode 100644
index 000000000..cce642c53
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "mt8516.dtsi"
+#include "pumpkin-common.dtsi"
+
+/ {
+	model = "Pumpkin MT8516";
+	compatible = "mediatek,mt8516";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
new file mode 100644
index 000000000..9cbd6dd8f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -0,0 +1,527 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/clock/mt8516-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "mt8516-pinfunc.h"
+
+/ {
+	compatible = "mediatek,mt8516";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1250000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_0>,
+				<&CPU_SLEEP_0_0 &CPU_SLEEP_0_0 &CPU_SLEEP_0_0>;
+			clocks = <&infracfg CLK_IFR_MUX1_SEL>,
+				 <&topckgen CLK_TOP_MAINPLL_D2>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <600>;
+				exit-latency-us = <600>;
+				min-residency-us = <1200>;
+				arm,psci-suspend-param = <0x0010000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <1000>;
+				min-residency-us = <2000>;
+				arm,psci-suspend-param = <0x2010000>;
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clk26m: clk26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32000>;
+		clock-output-names = "clk32k";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8516-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt8516-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: pericfg@10003050 {
+			compatible = "mediatek,mt8516-pericfg", "syscon";
+			reg = <0 0x10003050 0 0x1000>;
+		};
+
+		apmixedsys: apmixedsys@10018000 {
+			compatible = "mediatek,mt8516-apmixedsys", "syscon";
+			reg = <0 0x10018000 0 0x710>;
+			#clock-cells = <1>;
+		};
+
+		watchdog@10007000 {
+			compatible = "mediatek,mt8516-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_FALLING>;
+			#reset-cells = <1>;
+		};
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8516-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_CLK26M_D2>,
+				 <&topckgen CLK_TOP_APXGPT>;
+			clock-names = "clk13m", "bus";
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8516-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		efuse: efuse@10009000 {
+			compatible = "mediatek,mt8516-efuse", "mediatek,efuse";
+			reg = <0 0x10009000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8516-pwrap";
+			reg = <0 0x1000f000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PMICWRAP_26M>,
+				 <&topckgen CLK_TOP_PMICWRAP_AP>;
+			clock-names = "spi", "wrap";
+		};
+
+		sysirq: interrupt-controller@10200620 {
+			compatible = "mediatek,mt8516-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10310000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10310000 0 0x1000>,
+			      <0 0x10320000 0 0x1000>,
+			      <0 0x10340000 0 0x2000>,
+			      <0 0x10360000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apdma: dma-controller@11000480 {
+			compatible = "mediatek,mt8516-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000480 0 0x80>,
+			      <0 0x11000500 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>,
+			      <0 0x11000980 0 0x80>,
+			      <0 0x11000a00 0 0x80>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&topckgen CLK_TOP_APDMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@11005000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART0_SEL>,
+				 <&topckgen CLK_TOP_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0
+				&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11006000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART1_SEL>,
+				 <&topckgen CLK_TOP_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2
+				&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11007000 {
+			compatible = "mediatek,mt8516-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x1000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UART2_SEL>,
+				 <&topckgen CLK_TOP_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4
+				&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@11009000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x11009000 0 0x90>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C0>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1100a000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100a000 0 0x90>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C1>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1100b000 {
+			compatible = "mediatek,mt8516-i2c",
+				     "mediatek,mt2712-i2c";
+			reg = <0 0x1100b000 0 0x90>,
+			      <0 0x11000280 0 0x80>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_I2C2>,
+				 <&topckgen CLK_TOP_APDMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100c000 {
+			compatible = "mediatek,mt8516-spi",
+				     "mediatek,mt2712-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100c000 0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL_D12>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&topckgen CLK_TOP_SPI>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11120000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11120000 0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC0>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC0_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11130000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11130000 0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC1>,
+				 <&topckgen CLK_TOP_AHB_INFRA_SEL>,
+				 <&topckgen CLK_TOP_MSDC1_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc2: mmc@11170000 {
+			compatible = "mediatek,mt8516-mmc";
+			reg = <0 0x11170000 0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC2>,
+				 <&topckgen CLK_TOP_RG_MSDC2>,
+				 <&topckgen CLK_TOP_MSDC2_INFRA>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@11180000 {
+			compatible = "mediatek,mt8516-eth";
+			reg = <0 0x11180000 0 0x1000>;
+			mediatek,pericfg = <&pericfg>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_RG_ETH>,
+				 <&topckgen CLK_TOP_66M_ETH>,
+				 <&topckgen CLK_TOP_133M_ETH>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		rng: rng@1020c000 {
+			compatible = "mediatek,mt8516-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020c000 0 0x100>;
+			clocks = <&topckgen CLK_TOP_TRNG>;
+			clock-names = "rng";
+		};
+
+		pwm: pwm@11008000 {
+			compatible = "mediatek,mt8516-pwm";
+			reg = <0 0x11008000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_PWM>,
+				 <&topckgen CLK_TOP_PWM_B>,
+				 <&topckgen CLK_TOP_PWM1_FB>,
+				 <&topckgen CLK_TOP_PWM2_FB>,
+				 <&topckgen CLK_TOP_PWM3_FB>,
+				 <&topckgen CLK_TOP_PWM4_FB>,
+				 <&topckgen CLK_TOP_PWM5_FB>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3",
+				      "pwm4", "pwm5";
+		};
+
+		usb0: usb@11100000 {
+			compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb";
+			reg = <0 0x11100000 0 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb0_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			status = "disabled";
+		};
+
+		usb1: usb@11190000 {
+			compatible = "mediatek,mt8516-musb", "mediatek,mtk-musb";
+			reg = <0 0x11190000 0 0x1000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "mc";
+			phys = <&usb1_port PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_USB>,
+				 <&topckgen CLK_TOP_USBIF>,
+				 <&topckgen CLK_TOP_USB_1P>;
+			clock-names = "main","mcu","univpll";
+			dr_mode = "host";
+			status = "disabled";
+		};
+
+		usb_phy: t-phy@11110000 {
+			compatible = "mediatek,mt8516-tphy",
+				     "mediatek,generic-tphy-v1";
+			reg = <0 0x11110000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb0_port: usb-phy@11110800 {
+				reg = <0 0x11110800 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			usb1_port: usb-phy@11110900 {
+				reg = <0 0x11110900 0 0x100>;
+				clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
+		auxadc: adc@11003000 {
+			compatible = "mediatek,mt8516-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&topckgen CLK_TOP_AUX_ADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
new file mode 100644
index 000000000..ec8dfb3d1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &ethernet;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		key-volume-up {
+			gpios = <&pio 42 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <115>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-volume-down {
+			gpios = <&pio 43 GPIO_ACTIVE_LOW>;
+			label = "volume_down";
+			linux,code = <114>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		eint20-mux-sel0-hog {
+			gpio-hog;
+			gpios = <0 0>;
+			input;
+			line-name = "eint20_mux_sel0";
+		};
+
+		expcon-mux-sel1-hog {
+			gpio-hog;
+			gpios = <1 0>;
+			input;
+			line-name = "expcon_mux_sel1";
+		};
+
+		mrg-di-mux-sel2-hog {
+			gpio-hog;
+			gpios = <2 0>;
+			input;
+			line-name = "mrg_di_mux_sel2";
+		};
+
+		sd-sdio-mux-sel3-hog {
+			gpio-hog;
+			gpios = <3 0>;
+			input;
+			line-name = "sd_sdio_mux_sel3";
+		};
+
+		sd-sdio-mux-ctrl7-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-low;
+			line-name = "sd_sdio_mux_ctrl7";
+		};
+
+		hw-id0-hog {
+			gpio-hog;
+			gpios = <8 0>;
+			input;
+			line-name = "hw_id0";
+		};
+
+		hw-id1-hog {
+			gpio-hog;
+			gpios = <9 0>;
+			input;
+			line-name = "hw_id1";
+		};
+
+		hw-id2-hog {
+			gpio-hog;
+			gpios = <10 0>;
+			input;
+			line-name = "hw_id2";
+		};
+
+		fg-int-n-hog {
+			gpio-hog;
+			gpios = <11 0>;
+			input;
+			line-name = "fg_int_n";
+		};
+
+		usba-pwr-en-hog {
+			gpio-hog;
+			gpios = <12 0>;
+			output-high;
+			line-name = "usba_pwr_en";
+		};
+
+		wifi-3v3-pg-hog {
+			gpio-hog;
+			gpios = <13 0>;
+			input;
+			line-name = "wifi_3v3_pg";
+		};
+
+		cam-rst-hog {
+			gpio-hog;
+			gpios = <14 0>;
+			output-low;
+			line-name = "cam_rst";
+		};
+
+		cam-pwdn-hog {
+			gpio-hog;
+			gpios = <15 0>;
+			output-low;
+			line-name = "cam_pwdn";
+		};
+	};
+};
+
+&i2c2 {
+	clock-div = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins_default>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	usb-role-switch;
+
+	usb_con: connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&pio {
+	gpio_keys_default: gpiodefault {
+		pins_cmd_dat {
+			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
+				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c0_pins_a: i2c0 {
+		pins1 {
+			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
+				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2 {
+		pins1 {
+			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
+				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
+			bias-disable;
+		};
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		gpio_mux_rst_n_pin {
+			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
+			output-high;
+		};
+
+		gpio_mux_int_n_pin {
+			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	ethernet_pins_default: ethernet {
+		pins_ethernet {
+			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
+				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
+				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
+				 <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
+				 <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
+				 <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
+				 <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
+				 <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
+				 <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
+				 <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/Makefile b/arch/arm64/boot/dts/microchip/Makefile
new file mode 100644
index 000000000..c6e0313ee
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb125.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb134.dtb sparx5_pcb134_emmc.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb135.dtb sparx5_pcb135_emmc.dtb
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
new file mode 100644
index 000000000..24075cd91
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
+
+/ {
+	compatible = "microchip,sparx5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		spi0 = &spi0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	lcpll_clk: lcpll-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2500000000>;
+	};
+
+	clks: clock-controller@61110000c {
+		compatible = "microchip,sparx5-dpll";
+		#clock-cells = <1>;
+		clocks = <&lcpll_clk>;
+		reg = <0x6 0x1110000c 0x24>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	sys_clk: sys-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <625000000>;
+	};
+
+	axi: axi@600000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller@600300000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			reg = <0x6 0x00300000 0x10000>,	/* GIC Dist */
+			      <0x6 0x00340000 0xc0000>,	/* GICR */
+			      <0x6 0x00200000 0x2000>,	/* GICC */
+			      <0x6 0x00210000 0x2000>,  /* GICV */
+			      <0x6 0x00220000 0x2000>;  /* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpu_ctrl: syscon@600000000 {
+			compatible = "microchip,sparx5-cpu-syscon", "syscon",
+				     "simple-mfd";
+			reg = <0x6 0x00000000 0xd0>;
+			mux: mux-controller {
+				compatible = "mmio-mux";
+				#mux-control-cells = <0>;
+				/*
+				 * SI_OWNER and SI2_OWNER in GENERAL_CTRL
+				 * SPI:  value 9 - (SIMC,SIBM) = 0b1001
+				 * SPI2: value 6 - (SIBM,SIMC) = 0b0110
+				 */
+				mux-reg-masks = <0x88 0xf0>;
+			};
+		};
+
+		reset: reset-controller@611010008 {
+			compatible = "microchip,sparx5-switch-reset";
+			reg = <0x6 0x11010008 0x4>;
+			reg-names = "gcb";
+			#reset-cells = <1>;
+			cpu-syscon = <&cpu_ctrl>;
+		};
+
+		uart0: serial@600100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00100000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@600102000 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00102000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		spi0: spi@600104000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-spi";
+			reg = <0x6 0x00104000 0x40>;
+			num-cs = <16>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		timer1: timer@600105000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x6 0x00105000 0x1000>;
+			clocks = <&ahb_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdhci0: mmc@600800000 {
+			compatible = "microchip,dw-sparx5-sdhci";
+			status = "disabled";
+			reg = <0x6 0x00800000 0x1000>;
+			pinctrl-0 = <&emmc_pins>;
+			pinctrl-names = "default";
+			clocks = <&clks CLK_ID_AUX1>;
+			clock-names = "core";
+			assigned-clocks = <&clks CLK_ID_AUX1>;
+			assigned-clock-rates = <800000000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+		};
+
+		gpio: pinctrl@6110101e0 {
+			compatible = "microchip,sparx5-pinctrl";
+			reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 64>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+
+			cs1_pins: cs1-pins {
+				pins = "GPIO_16";
+				function = "si";
+			};
+
+			cs2_pins: cs2-pins {
+				pins = "GPIO_17";
+				function = "si";
+			};
+
+			cs3_pins: cs3-pins {
+				pins = "GPIO_18";
+				function = "si";
+			};
+
+			si2_pins: si2-pins {
+				pins = "GPIO_39", "GPIO_40", "GPIO_41";
+				function = "si2";
+			};
+
+			sgpio0_pins: sgpio-pins {
+				pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+				function = "sg0";
+			};
+
+			sgpio1_pins: sgpio1-pins {
+				pins = "GPIO_4", "GPIO_5", "GPIO_12", "GPIO_13";
+				function = "sg1";
+			};
+
+			sgpio2_pins: sgpio2-pins {
+				pins = "GPIO_30", "GPIO_31", "GPIO_32",
+				       "GPIO_33";
+				function = "sg2";
+			};
+
+			uart_pins: uart-pins {
+				pins = "GPIO_10", "GPIO_11";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart2";
+			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_14", "GPIO_15";
+				function = "twi";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "GPIO_28", "GPIO_29";
+				function = "twi2";
+			};
+
+			emmc_pins: emmc-pins {
+				pins = "GPIO_34", "GPIO_35", "GPIO_36",
+					"GPIO_37", "GPIO_38", "GPIO_39",
+					"GPIO_40", "GPIO_41", "GPIO_42",
+					"GPIO_43", "GPIO_44", "GPIO_45",
+					"GPIO_46", "GPIO_47";
+				function = "emmc";
+			};
+
+			miim1_pins: miim1-pins {
+				pins = "GPIO_56", "GPIO_57";
+				function = "miim";
+			};
+
+			miim2_pins: miim2-pins {
+				pins = "GPIO_58", "GPIO_59";
+				function = "miim";
+			};
+
+			miim3_pins: miim3-pins {
+				pins = "GPIO_52", "GPIO_53";
+				function = "miim";
+			};
+		};
+
+		sgpio0: gpio@61101036c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio0_pins>;
+			pinctrl-names = "default";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			reg = <0x6 0x1101036c 0x100>;
+			sgpio_in0: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+			sgpio_out0: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+			};
+		};
+
+		sgpio1: gpio@611010484 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio1_pins>;
+			pinctrl-names = "default";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			reg = <0x6 0x11010484 0x100>;
+			sgpio_in1: gpio@0 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+			sgpio_out1: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+			};
+		};
+
+		sgpio2: gpio@61101059c {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "microchip,sparx5-sgpio";
+			status = "disabled";
+			clocks = <&sys_clk>;
+			pinctrl-0 = <&sgpio2_pins>;
+			pinctrl-names = "default";
+			resets = <&reset 0>;
+			reset-names = "switch";
+			reg = <0x6 0x1101059c 0x100>;
+			sgpio_in2: gpio@0 {
+				reg = <0>;
+				compatible = "microchip,sparx5-sgpio-bank";
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+			sgpio_out2: gpio@1 {
+				compatible = "microchip,sparx5-sgpio-bank";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <3>;
+				ngpios = <96>;
+			};
+		};
+
+		i2c0: i2c@600101000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		i2c1: i2c@600103000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00103000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		tmon0: tmon@610508110 {
+			compatible = "microchip,sparx5-temp";
+			reg = <0x6 0x10508110 0xc>;
+			#thermal-sensor-cells = <0>;
+			clocks = <&ahb_clk>;
+		};
+
+		mdio0: mdio@6110102b0 {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x110102b0 0x24>;
+		};
+
+		mdio1: mdio@6110102d4 {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			pinctrl-0 = <&miim1_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x110102d4 0x24>;
+		};
+
+		mdio2: mdio@6110102f8 {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			pinctrl-0 = <&miim2_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x110102d4 0x24>;
+		};
+
+		mdio3: mdio@61101031c {
+			compatible = "mscc,ocelot-miim";
+			status = "disabled";
+			pinctrl-0 = <&miim3_pins>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6 0x1101031c 0x24>;
+		};
+
+		serdes: serdes@10808000 {
+			compatible = "microchip,sparx5-serdes";
+			#phy-cells = <1>;
+			clocks = <&sys_clk>;
+			reg = <0x6 0x10808000 0x5d0000>;
+		};
+
+		switch: switch@600000000 {
+			compatible = "microchip,sparx5-switch";
+			reg = <0x6 0 0x401000>,
+			      <0x6 0x10004000 0x7fc000>,
+			      <0x6 0x11010000 0xaf0000>;
+			reg-names = "cpu", "dev", "gcb";
+			interrupt-names = "xtr", "fdma", "ptp";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&reset 0>;
+			reset-names = "switch";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
new file mode 100644
index 000000000..ce0747fd6
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+&gpio {
+	cs14_pins: cs14-pins {
+		pins = "GPIO_44";
+		function = "si";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&si2_pins>;
+	pinctrl-names = "default";
+	spi@e {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <14>; /* CS14 */
+		flash@6 {
+			compatible = "spi-nand";
+			pinctrl-0 = <&cs14_pins>;
+			pinctrl-names = "default";
+			reg = <0x6>; /* SPI2 */
+			spi-max-frequency = <42000000>;
+			rx-sample-delay-ns = <7>;  /* Tune for speed */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
new file mode 100644
index 000000000..dbf8c1d48
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/ {
+	model = "Sparx5 PCB125 Reference Board";
+	compatible = "microchip,sparx5-pcb125", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&gpio {
+	emmc_pins: emmc-pins {
+		/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+		 * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+		 */
+		pins = "GPIO_34", "GPIO_38", "GPIO_39",
+			"GPIO_40", "GPIO_41", "GPIO_42",
+			"GPIO_43", "GPIO_44", "GPIO_45",
+			"GPIO_46", "GPIO_47";
+		drive-strength = <3>;
+		function = "emmc";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&emmc_pins>;
+	max-frequency = <8000000>;
+	microchip,clock-delay = <10>;
+};
+
+&spi0 {
+	status = "okay";
+	spi@0 {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;	/* CS0 */
+		flash@9 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>;	/* SPI */
+		};
+	};
+	spi@1 {
+		compatible = "spi-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>; /* CS1 */
+		flash@9 {
+			compatible = "spi-nand";
+			pinctrl-0 = <&cs1_pins>;
+			pinctrl-names = "default";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>;	/* SPI */
+		};
+	};
+};
+
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 23>;
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
new file mode 100644
index 000000000..45ca1af7e
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+#include "sparx5_nand.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
new file mode 100644
index 000000000..f3e226de5
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "twr0:green";
+			gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>;
+		};
+		led@1 {
+			label = "twr0:yellow";
+			gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>;
+		};
+		led@2 {
+			label = "twr1:green";
+			gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>;
+		};
+		led@3 {
+			label = "twr1:yellow";
+			gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>;
+		};
+		led@4 {
+			label = "twr2:green";
+			gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>;
+		};
+		led@5 {
+			label = "twr2:yellow";
+			gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>;
+		};
+		led@6 {
+			label = "twr3:green";
+			gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>;
+		};
+		led@7 {
+			label = "twr3:yellow";
+			gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>;
+		};
+		led@8 {
+			label = "eth12:green";
+			gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@9 {
+			label = "eth12:yellow";
+			gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@10 {
+			label = "eth13:green";
+			gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@11 {
+			label = "eth13:yellow";
+			gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@12 {
+			label = "eth14:green";
+			gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@13 {
+			label = "eth14:yellow";
+			gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@14 {
+			label = "eth15:green";
+			gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@15 {
+			label = "eth15:yellow";
+			gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@16 {
+			label = "eth48:green";
+			gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@17 {
+			label = "eth48:yellow";
+			gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@18 {
+			label = "eth49:green";
+			gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@19 {
+			label = "eth49:yellow";
+			gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@20 {
+			label = "eth50:green";
+			gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@21 {
+			label = "eth50:yellow";
+			gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@22 {
+			label = "eth51:green";
+			gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@23 {
+			label = "eth51:yellow";
+			gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@24 {
+			label = "eth52:green";
+			gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@25 {
+			label = "eth52:yellow";
+			gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@26 {
+			label = "eth53:green";
+			gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@27 {
+			label = "eth53:yellow";
+			gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@28 {
+			label = "eth54:green";
+			gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@29 {
+			label = "eth54:yellow";
+			gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@30 {
+			label = "eth55:green";
+			gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@31 {
+			label = "eth55:yellow";
+			gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@32 {
+			label = "eth56:green";
+			gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@33 {
+			label = "eth56:yellow";
+			gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@34 {
+			label = "eth57:green";
+			gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@35 {
+			label = "eth57:yellow";
+			gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@36 {
+			label = "eth58:green";
+			gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@37 {
+			label = "eth58:yellow";
+			gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@38 {
+			label = "eth59:green";
+			gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@39 {
+			label = "eth59:yellow";
+			gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@40 {
+			label = "eth60:green";
+			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@41 {
+			label = "eth60:yellow";
+			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@42 {
+			label = "eth61:green";
+			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@43 {
+			label = "eth61:yellow";
+			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@44 {
+			label = "eth62:green";
+			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@45 {
+			label = "eth62:yellow";
+			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@46 {
+			label = "eth63:green";
+			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led@47 {
+			label = "eth63:yellow";
+			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <8 15>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio1 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <24 31>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	spi@0 {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;	/* CS0 */
+		flash@9 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>;	/* SPI */
+		};
+	};
+};
+
+&sgpio0 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <8 15>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio1 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <24 31>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio2 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 0>, <11 31>;
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins {
+	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
+		      "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
+		      "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0-pins {
+		pins = "GPIO_16";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1-pins {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2-pins {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3-pins {
+		pins = "GPIO_19";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_4: i2cmux-4-pins {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_5: i2cmux-5-pins {
+		pins = "GPIO_22";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_6: i2cmux-6-pins {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_7: i2cmux-7-pins {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_8: i2cmux-8-pins {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_9: i2cmux-9-pins {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_10: i2cmux-10-pins {
+		pins = "GPIO_56";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_11: i2cmux-11-pins {
+		pins = "GPIO_57";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+	i2c0_emux: i2c0-emux@0 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
+		"i2c_sfp5", "i2c_sfp6", "i2c_sfp7", "i2c_sfp8",
+		"i2c_sfp9", "i2c_sfp10", "i2c_sfp11", "i2c_sfp12", "idle";
+	pinctrl-0 = <&i2cmux_0>;
+	pinctrl-1 = <&i2cmux_1>;
+	pinctrl-2 = <&i2cmux_2>;
+	pinctrl-3 = <&i2cmux_3>;
+	pinctrl-4 = <&i2cmux_4>;
+	pinctrl-5 = <&i2cmux_5>;
+	pinctrl-6 = <&i2cmux_6>;
+	pinctrl-7 = <&i2cmux_7>;
+	pinctrl-8 = <&i2cmux_8>;
+	pinctrl-9 = <&i2cmux_9>;
+	pinctrl-10 = <&i2cmux_10>;
+	pinctrl-11 = <&i2cmux_11>;
+	pinctrl-12 = <&i2cmux_pins_i>;
+	i2c_sfp1: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp2: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp3: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp4: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp5: i2c_sfp5 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp6: i2c_sfp6 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp7: i2c_sfp7 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp8: i2c_sfp8 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp9: i2c_sfp9 {
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp10: i2c_sfp10 {
+		reg = <0x9>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp11: i2c_sfp11 {
+		reg = <0xa>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp12: i2c_sfp12 {
+		reg = <0xb>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0_emux {
+	mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH
+		     &gpio 60 GPIO_ACTIVE_HIGH
+		     &gpio 61 GPIO_ACTIVE_HIGH
+		     &gpio 54 GPIO_ACTIVE_HIGH>;
+	idle-state = <0x8>;
+	i2c_sfp13: i2c_sfp13 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp14: i2c_sfp14 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp15: i2c_sfp15 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp16: i2c_sfp16 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp17: i2c_sfp17 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp18: i2c_sfp18 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp19: i2c_sfp19 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp20: i2c_sfp20 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	phy64: ethernet-phy@64 {
+		reg = <28>;
+	};
+};
+
+&axi {
+	sfp_eth12: sfp-eth12 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth13: sfp-eth13 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth14: sfp-eth14 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth15: sfp-eth15 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth48: sfp-eth48 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
+		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth49: sfp-eth49 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
+		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth50: sfp-eth50 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
+		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth51: sfp-eth51 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
+		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth52: sfp-eth52 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
+		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth53: sfp-eth53 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
+		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth54: sfp-eth54 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
+		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth55: sfp-eth55 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
+		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth56: sfp-eth56 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
+		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth57: sfp-eth57 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
+		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth58: sfp-eth58 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
+		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth59: sfp-eth59 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
+		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth60: sfp-eth60 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
+		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
+		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
+		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
+		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&switch {
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 10G SFPs */
+		port12: port@12 {
+			reg = <12>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 13>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth12>;
+			microchip,sd-sgpio = <301>;
+			managed = "in-band-status";
+		};
+		port13: port@13 {
+			reg = <13>;
+			/* Example: CU SFP, 1G speed */
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 14>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth13>;
+			microchip,sd-sgpio = <305>;
+			managed = "in-band-status";
+		};
+		port14: port@14 {
+			reg = <14>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 15>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth14>;
+			microchip,sd-sgpio = <309>;
+			managed = "in-band-status";
+		};
+		port15: port@15 {
+			reg = <15>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 16>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth15>;
+			microchip,sd-sgpio = <313>;
+			managed = "in-band-status";
+		};
+		port48: port@48 {
+			reg = <48>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 17>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth48>;
+			microchip,sd-sgpio = <317>;
+			managed = "in-band-status";
+		};
+		port49: port@49 {
+			reg = <49>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 18>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth49>;
+			microchip,sd-sgpio = <321>;
+			managed = "in-band-status";
+		};
+		port50: port@50 {
+			reg = <50>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 19>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth50>;
+			microchip,sd-sgpio = <325>;
+			managed = "in-band-status";
+		};
+		port51: port@51 {
+			reg = <51>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 20>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth51>;
+			microchip,sd-sgpio = <329>;
+			managed = "in-band-status";
+		};
+		port52: port@52 {
+			reg = <52>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 21>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth52>;
+			microchip,sd-sgpio = <333>;
+			managed = "in-band-status";
+		};
+		port53: port@53 {
+			reg = <53>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 22>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth53>;
+			microchip,sd-sgpio = <337>;
+			managed = "in-band-status";
+		};
+		port54: port@54 {
+			reg = <54>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 23>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth54>;
+			microchip,sd-sgpio = <341>;
+			managed = "in-band-status";
+		};
+		port55: port@55 {
+			reg = <55>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 24>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth55>;
+			microchip,sd-sgpio = <345>;
+			managed = "in-band-status";
+		};
+		/* 25G SFPs */
+		port56: port@56 {
+			reg = <56>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 25>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth56>;
+			microchip,sd-sgpio = <349>;
+			managed = "in-band-status";
+		};
+		port57: port@57 {
+			reg = <57>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 26>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth57>;
+			microchip,sd-sgpio = <353>;
+			managed = "in-band-status";
+		};
+		port58: port@58 {
+			reg = <58>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 27>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth58>;
+			microchip,sd-sgpio = <357>;
+			managed = "in-band-status";
+		};
+		port59: port@59 {
+			reg = <59>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 28>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth59>;
+			microchip,sd-sgpio = <361>;
+			managed = "in-band-status";
+		};
+		port60: port@60 {
+			reg = <60>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 29>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth60>;
+			microchip,sd-sgpio = <365>;
+			managed = "in-band-status";
+		};
+		port61: port@61 {
+			reg = <61>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 30>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth61>;
+			microchip,sd-sgpio = <369>;
+			managed = "in-band-status";
+		};
+		port62: port@62 {
+			reg = <62>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 31>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth62>;
+			microchip,sd-sgpio = <373>;
+			managed = "in-band-status";
+		};
+		port63: port@63 {
+			reg = <63>;
+			microchip,bandwidth = <10000>;
+			phys = <&serdes 32>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth63>;
+			microchip,sd-sgpio = <377>;
+			managed = "in-band-status";
+		};
+		/* Finally the Management interface */
+		port64: port@64 {
+			reg = <64>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 0>;
+			phy-handle = <&phy64>;
+			phy-mode = "sgmii";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
new file mode 100644
index 000000000..bbb9852c1
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&gpio {
+	emmc_pins: emmc-pins {
+		/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+		 * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+		 */
+		pins = "GPIO_34", "GPIO_38", "GPIO_39",
+			"GPIO_40", "GPIO_41", "GPIO_42",
+			"GPIO_43", "GPIO_44", "GPIO_45",
+			"GPIO_46", "GPIO_47";
+		drive-strength = <3>;
+		function = "emmc";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+	microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
new file mode 100644
index 000000000..647cdb38b
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+#include "sparx5_nand.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
new file mode 100644
index 000000000..82ce007d9
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "eth60:yellow";
+			gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@1 {
+			label = "eth60:green";
+			gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "eth61:yellow";
+			gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@3 {
+			label = "eth61:green";
+			gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@4 {
+			label = "eth62:yellow";
+			gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@5 {
+			label = "eth62:green";
+			gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@6 {
+			label = "eth63:yellow";
+			gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@7 {
+			label = "eth63:green";
+			gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins {
+	       pins = "GPIO_35", "GPIO_36",
+		      "GPIO_50", "GPIO_51";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_s29: i2cmux-0-pins {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s30: i2cmux-1-pins {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s31: i2cmux-2-pins {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s32: i2cmux-3-pins {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <8000000>;
+		reg = <0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	spi@0 {
+		compatible = "spi-mux";
+		mux-controls = <&mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>; /* CS0 */
+		flash@9 {
+			compatible = "jedec,spi-nor";
+			spi-max-frequency = <8000000>;
+			reg = <0x9>; /* SPI */
+		};
+	};
+};
+
+&sgpio1 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <24 31>;
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
+&sgpio2 {
+	status = "okay";
+	microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4",
+		"idle";
+	pinctrl-0 = <&i2cmux_s29>;
+	pinctrl-1 = <&i2cmux_s30>;
+	pinctrl-2 = <&i2cmux_s31>;
+	pinctrl-3 = <&i2cmux_s32>;
+	pinctrl-4 = <&i2cmux_pins_i>;
+	i2c_sfp1: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp2: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp3: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c_sfp4: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&axi {
+	sfp_eth60: sfp-eth60 {
+		compatible	 = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth61: sfp-eth61 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth62: sfp-eth62 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+	};
+	sfp_eth63: sfp-eth63 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy5: ethernet-phy@5 {
+		reg = <5>;
+	};
+	phy6: ethernet-phy@6 {
+		reg = <6>;
+	};
+	phy7: ethernet-phy@7 {
+		reg = <7>;
+	};
+	phy8: ethernet-phy@8 {
+		reg = <8>;
+	};
+	phy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+	phy10: ethernet-phy@10 {
+		reg = <10>;
+	};
+	phy11: ethernet-phy@11 {
+		reg = <11>;
+	};
+	phy12: ethernet-phy@12 {
+		reg = <12>;
+	};
+	phy13: ethernet-phy@13 {
+		reg = <13>;
+	};
+	phy14: ethernet-phy@14 {
+		reg = <14>;
+	};
+	phy15: ethernet-phy@15 {
+		reg = <15>;
+	};
+	phy16: ethernet-phy@16 {
+		reg = <16>;
+	};
+	phy17: ethernet-phy@17 {
+		reg = <17>;
+	};
+	phy18: ethernet-phy@18 {
+		reg = <18>;
+	};
+	phy19: ethernet-phy@19 {
+		reg = <19>;
+	};
+	phy20: ethernet-phy@20 {
+		reg = <20>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+	phy22: ethernet-phy@22 {
+		reg = <22>;
+	};
+	phy23: ethernet-phy@23 {
+		reg = <23>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+	phy24: ethernet-phy@24 {
+		reg = <0>;
+	};
+	phy25: ethernet-phy@25 {
+		reg = <1>;
+	};
+	phy26: ethernet-phy@26 {
+		reg = <2>;
+	};
+	phy27: ethernet-phy@27 {
+		reg = <3>;
+	};
+	phy28: ethernet-phy@28 {
+		reg = <4>;
+	};
+	phy29: ethernet-phy@29 {
+		reg = <5>;
+	};
+	phy30: ethernet-phy@30 {
+		reg = <6>;
+	};
+	phy31: ethernet-phy@31 {
+		reg = <7>;
+	};
+	phy32: ethernet-phy@32 {
+		reg = <8>;
+	};
+	phy33: ethernet-phy@33 {
+		reg = <9>;
+	};
+	phy34: ethernet-phy@34 {
+		reg = <10>;
+	};
+	phy35: ethernet-phy@35 {
+		reg = <11>;
+	};
+	phy36: ethernet-phy@36 {
+		reg = <12>;
+	};
+	phy37: ethernet-phy@37 {
+		reg = <13>;
+	};
+	phy38: ethernet-phy@38 {
+		reg = <14>;
+	};
+	phy39: ethernet-phy@39 {
+		reg = <15>;
+	};
+	phy40: ethernet-phy@40 {
+		reg = <16>;
+	};
+	phy41: ethernet-phy@41 {
+		reg = <17>;
+	};
+	phy42: ethernet-phy@42 {
+		reg = <18>;
+	};
+	phy43: ethernet-phy@43 {
+		reg = <19>;
+	};
+	phy44: ethernet-phy@44 {
+		reg = <20>;
+	};
+	phy45: ethernet-phy@45 {
+		reg = <21>;
+	};
+	phy46: ethernet-phy@46 {
+		reg = <22>;
+	};
+	phy47: ethernet-phy@47 {
+		reg = <23>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	phy64: ethernet-phy@64 {
+		reg = <28>;
+	};
+};
+
+&switch {
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port0: port@0 {
+			reg = <0>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy0>;
+			phy-mode = "qsgmii";
+		};
+		port1: port@1 {
+			reg = <1>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy1>;
+			phy-mode = "qsgmii";
+		};
+		port2: port@2 {
+			reg = <2>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy2>;
+			phy-mode = "qsgmii";
+		};
+		port3: port@3 {
+			reg = <3>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 13>;
+			phy-handle = <&phy3>;
+			phy-mode = "qsgmii";
+		};
+		port4: port@4 {
+			reg = <4>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy4>;
+			phy-mode = "qsgmii";
+		};
+		port5: port@5 {
+			reg = <5>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy5>;
+			phy-mode = "qsgmii";
+		};
+		port6: port@6 {
+			reg = <6>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy6>;
+			phy-mode = "qsgmii";
+		};
+		port7: port@7 {
+			reg = <7>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 14>;
+			phy-handle = <&phy7>;
+			phy-mode = "qsgmii";
+		};
+		port8: port@8 {
+			reg = <8>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy8>;
+			phy-mode = "qsgmii";
+		};
+		port9: port@9 {
+			reg = <9>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy9>;
+			phy-mode = "qsgmii";
+		};
+		port10: port@10 {
+			reg = <10>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy10>;
+			phy-mode = "qsgmii";
+		};
+		port11: port@11 {
+			reg = <11>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 15>;
+			phy-handle = <&phy11>;
+			phy-mode = "qsgmii";
+		};
+		port12: port@12 {
+			reg = <12>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy12>;
+			phy-mode = "qsgmii";
+		};
+		port13: port@13 {
+			reg = <13>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy13>;
+			phy-mode = "qsgmii";
+		};
+		port14: port@14 {
+			reg = <14>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy14>;
+			phy-mode = "qsgmii";
+		};
+		port15: port@15 {
+			reg = <15>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 16>;
+			phy-handle = <&phy15>;
+			phy-mode = "qsgmii";
+		};
+		port16: port@16 {
+			reg = <16>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy16>;
+			phy-mode = "qsgmii";
+		};
+		port17: port@17 {
+			reg = <17>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy17>;
+			phy-mode = "qsgmii";
+		};
+		port18: port@18 {
+			reg = <18>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy18>;
+			phy-mode = "qsgmii";
+		};
+		port19: port@19 {
+			reg = <19>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 17>;
+			phy-handle = <&phy19>;
+			phy-mode = "qsgmii";
+		};
+		port20: port@20 {
+			reg = <20>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy20>;
+			phy-mode = "qsgmii";
+		};
+		port21: port@21 {
+			reg = <21>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy21>;
+			phy-mode = "qsgmii";
+		};
+		port22: port@22 {
+			reg = <22>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy22>;
+			phy-mode = "qsgmii";
+		};
+		port23: port@23 {
+			reg = <23>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 18>;
+			phy-handle = <&phy23>;
+			phy-mode = "qsgmii";
+		};
+		port24: port@24 {
+			reg = <24>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy24>;
+			phy-mode = "qsgmii";
+		};
+		port25: port@25 {
+			reg = <25>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy25>;
+			phy-mode = "qsgmii";
+		};
+		port26: port@26 {
+			reg = <26>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy26>;
+			phy-mode = "qsgmii";
+		};
+		port27: port@27 {
+			reg = <27>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 19>;
+			phy-handle = <&phy27>;
+			phy-mode = "qsgmii";
+		};
+		port28: port@28 {
+			reg = <28>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy28>;
+			phy-mode = "qsgmii";
+		};
+		port29: port@29 {
+			reg = <29>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy29>;
+			phy-mode = "qsgmii";
+		};
+		port30: port@30 {
+			reg = <30>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy30>;
+			phy-mode = "qsgmii";
+		};
+		port31: port@31 {
+			reg = <31>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 20>;
+			phy-handle = <&phy31>;
+			phy-mode = "qsgmii";
+		};
+		port32: port@32 {
+			reg = <32>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy32>;
+			phy-mode = "qsgmii";
+		};
+		port33: port@33 {
+			reg = <33>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy33>;
+			phy-mode = "qsgmii";
+		};
+		port34: port@34 {
+			reg = <34>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy34>;
+			phy-mode = "qsgmii";
+		};
+		port35: port@35 {
+			reg = <35>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 21>;
+			phy-handle = <&phy35>;
+			phy-mode = "qsgmii";
+		};
+		port36: port@36 {
+			reg = <36>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy36>;
+			phy-mode = "qsgmii";
+		};
+		port37: port@37 {
+			reg = <37>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy37>;
+			phy-mode = "qsgmii";
+		};
+		port38: port@38 {
+			reg = <38>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy38>;
+			phy-mode = "qsgmii";
+		};
+		port39: port@39 {
+			reg = <39>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 22>;
+			phy-handle = <&phy39>;
+			phy-mode = "qsgmii";
+		};
+		port40: port@40 {
+			reg = <40>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy40>;
+			phy-mode = "qsgmii";
+		};
+		port41: port@41 {
+			reg = <41>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy41>;
+			phy-mode = "qsgmii";
+		};
+		port42: port@42 {
+			reg = <42>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy42>;
+			phy-mode = "qsgmii";
+		};
+		port43: port@43 {
+			reg = <43>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 23>;
+			phy-handle = <&phy43>;
+			phy-mode = "qsgmii";
+		};
+		port44: port@44 {
+			reg = <44>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy44>;
+			phy-mode = "qsgmii";
+		};
+		port45: port@45 {
+			reg = <45>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy45>;
+			phy-mode = "qsgmii";
+		};
+		port46: port@46 {
+			reg = <46>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy46>;
+			phy-mode = "qsgmii";
+		};
+		port47: port@47 {
+			reg = <47>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 24>;
+			phy-handle = <&phy47>;
+			phy-mode = "qsgmii";
+		};
+		/* Then the 25G interfaces */
+		port60: port@60 {
+			reg = <60>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 29>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth60>;
+			managed = "in-band-status";
+		};
+		port61: port@61 {
+			reg = <61>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 30>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth61>;
+			managed = "in-band-status";
+		};
+		port62: port@62 {
+			reg = <62>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 31>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth62>;
+			managed = "in-band-status";
+		};
+		port63: port@63 {
+			reg = <63>;
+			microchip,bandwidth = <25000>;
+			phys = <&serdes 32>;
+			phy-mode = "10gbase-r";
+			sfp = <&sfp_eth63>;
+			managed = "in-band-status";
+		};
+		/* Finally the Management interface */
+		port64: port@64 {
+			reg = <64>;
+			microchip,bandwidth = <1000>;
+			phys = <&serdes 0>;
+			phy-handle = <&phy64>;
+			phy-mode = "sgmii";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
new file mode 100644
index 000000000..f82266fe2
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&gpio {
+	emmc_pins: emmc-pins {
+		/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
+		 * (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
+		 */
+		pins = "GPIO_34", "GPIO_38", "GPIO_39",
+			"GPIO_40", "GPIO_41", "GPIO_42",
+			"GPIO_43", "GPIO_44", "GPIO_45",
+			"GPIO_46", "GPIO_47";
+		drive-strength = <3>;
+		function = "emmc";
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+	microchip,clock-delay = <10>;
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
new file mode 100644
index 000000000..32bb76b32
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5.dtsi"
+
+&psci {
+	status = "disabled";
+};
+
+&cpu0 {
+	enable-method = "spin-table";
+};
+
+&cpu1 {
+	enable-method = "spin-table";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile
new file mode 100644
index 000000000..3bc978780
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-iot-512m.dtb
+dtb-$(CONFIG_ARCH_MA35) += ma35d1-som-256m.dtb
+dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
new file mode 100644
index 000000000..b89e2be6a
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-iot-512m.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-IoT";
+	compatible = "nuvoton,ma35d1-iot", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x20000000>; /* 512M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
new file mode 100644
index 000000000..a1ebddecb
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1-som-256m.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+/dts-v1/;
+#include "ma35d1.dtsi"
+
+/ {
+	model = "Nuvoton MA35D1-SOM";
+	compatible = "nuvoton,ma35d1-som", "nuvoton,ma35d1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mem: memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x10000000>; /* 256M DRAM */
+	};
+
+	clk_hxt: clock-hxt {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clk_hxt";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&clk {
+	assigned-clocks = <&clk CAPLL>,
+			  <&clk DDRPLL>,
+			  <&clk APLL>,
+			  <&clk EPLL>,
+			  <&clk VPLL>;
+	assigned-clock-rates = <800000000>,
+			       <266000000>,
+			       <180000000>,
+			       <500000000>,
+			       <102000000>;
+	nuvoton,pll-mode = "integer",
+			   "fractional",
+			   "integer",
+			   "integer",
+			   "integer";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
new file mode 100644
index 000000000..781cdae56
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/ma35d1.dtsi
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Nuvoton Technology Corp.
+ * Author: Shan-Chun Hung <schung@nuvoton.com>
+ *         Jacky huang <ychuang3@nuvoton.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+#include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
+
+/ {
+	compatible = "nuvoton,ma35d1";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@50801000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0x50801000 0 0x1000>, /* GICD */
+		      <0x0 0x50802000 0 0x2000>, /* GICC */
+		      <0x0 0x50804000 0 0x2000>, /* GICH */
+		      <0x0 0x50806000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0x13) |
+			      IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+			      IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		interrupt-parent = <&gic>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sys: system-management@40460000 {
+			compatible = "nuvoton,ma35d1-reset";
+			reg = <0x0 0x40460000 0x0 0x200>;
+			#reset-cells = <1>;
+		};
+
+		clk: clock-controller@40460200 {
+			compatible = "nuvoton,ma35d1-clk";
+			reg = <0x00000000 0x40460200 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&clk_hxt>;
+		};
+
+		uart0: serial@40700000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40700000 0x0 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART0_GATE>;
+			status = "disabled";
+		};
+
+		uart1: serial@40710000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40710000 0x0 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART1_GATE>;
+			status = "disabled";
+		};
+
+		uart2: serial@40720000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40720000 0x0 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART2_GATE>;
+			status = "disabled";
+		};
+
+		uart3: serial@40730000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40730000 0x0 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART3_GATE>;
+			status = "disabled";
+		};
+
+		uart4: serial@40740000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40740000 0x0 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART4_GATE>;
+			status = "disabled";
+		};
+
+		uart5: serial@40750000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40750000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART5_GATE>;
+			status = "disabled";
+		};
+
+		uart6: serial@40760000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40760000 0x0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART6_GATE>;
+			status = "disabled";
+		};
+
+		uart7: serial@40770000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40770000 0x0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART7_GATE>;
+			status = "disabled";
+		};
+
+		uart8: serial@40780000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40780000 0x0 0x100>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART8_GATE>;
+			status = "disabled";
+		};
+
+		uart9: serial@40790000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40790000 0x0 0x100>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART9_GATE>;
+			status = "disabled";
+		};
+
+		uart10: serial@407a0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART10_GATE>;
+			status = "disabled";
+		};
+
+		uart11: serial@407b0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART11_GATE>;
+			status = "disabled";
+		};
+
+		uart12: serial@407c0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART12_GATE>;
+			status = "disabled";
+		};
+
+		uart13: serial@407d0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407d0000 0x0 0x100>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART13_GATE>;
+			status = "disabled";
+		};
+
+		uart14: serial@407e0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART14_GATE>;
+			status = "disabled";
+		};
+
+		uart15: serial@407f0000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x407f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART15_GATE>;
+			status = "disabled";
+		};
+
+		uart16: serial@40880000 {
+			compatible = "nuvoton,ma35d1-uart";
+			reg = <0x0 0x40880000 0x0 0x100>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk UART16_GATE>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
new file mode 100644
index 000000000..ecd171b2f
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include <dt-bindings/clock/nuvoton,npcm845-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gcr: system-controller@f0800000 {
+			compatible = "nuvoton,npcm845-gcr", "syscon";
+			reg = <0x0 0xf0800000 0x0 0x1000>;
+		};
+
+		gic: interrupt-controller@dfff9000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xdfff9000 0x0 0x1000>,
+			      <0x0 0xdfffa000 0x0 0x2000>,
+			      <0x0 0xdfffc000 0x0 0x2000>,
+			      <0x0 0xdfffe000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#address-cells = <0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+			};
+		};
+	};
+
+	ahb {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		rstc: reset-controller@f0801000 {
+			compatible = "nuvoton,npcm845-reset";
+			reg = <0x0 0xf0801000 0x0 0x78>;
+			#reset-cells = <2>;
+			nuvoton,sysgcr = <&gcr>;
+		};
+
+		clk: clock-controller@f0801000 {
+			compatible = "nuvoton,npcm845-clk";
+			#clock-cells = <1>;
+			reg = <0x0 0xf0801000 0x0 0x1000>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			interrupt-parent = <&gic>;
+			ranges = <0x0 0x0 0xf0000000 0x00300000>,
+				<0xfff00000 0x0 0xfff00000 0x00016000>;
+
+			peci: peci-controller@100000 {
+				compatible = "nuvoton,npcm845-peci";
+				reg = <0x100000 0x1000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk NPCM8XX_CLK_APB3>;
+				cmd-timeout-ms = <1000>;
+				status = "disabled";
+			};
+
+			timer0: timer@8000 {
+				compatible = "nuvoton,npcm845-timer";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x8000 0x1C>;
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clock-names = "refclk";
+			};
+
+			serial0: serial@0 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x0 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial1: serial@1000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x1000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial2: serial@2000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x2000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial3: serial@3000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x3000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial4: serial@4000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x4000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial5: serial@5000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x5000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			serial6: serial@6000 {
+				compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart";
+				reg = <0x6000 0x1000>;
+				clocks = <&clk NPCM8XX_CLK_UART>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			watchdog0: watchdog@801c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x801c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+
+			watchdog1: watchdog@901c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x901c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+
+			watchdog2: watchdog@a01c {
+				compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xa01c 0x4>;
+				status = "disabled";
+				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				syscon = <&gcr>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
new file mode 100644
index 000000000..a5ab2bc0f
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+/dts-v1/;
+#include "nuvoton-npcm845.dtsi"
+
+/ {
+	model = "Nuvoton npcm845 Development Board (Device Tree)";
+	compatible = "nuvoton,npcm845-evb", "nuvoton,npcm845";
+
+	aliases {
+		serial0 = &serial0;
+	};
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&watchdog1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
new file mode 100644
index 000000000..383938dcd
--- /dev/null
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
+
+#include "nuvoton-common-npcm8xx.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			clocks = <&clk NPCM8XX_CLK_CPU>;
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+			enable-method = "psci";
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible      = "arm,psci-1.0";
+		method          = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
new file mode 100644
index 000000000..c38c809fe
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS_tegra210-p2371-2180 := -@
+DTC_FLAGS_tegra210-p3450-0000 := -@
+DTC_FLAGS_tegra186-p2771-0000 := -@
+DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@
+DTC_FLAGS_tegra194-p2972-0000 := -@
+DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
+DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
+DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
+DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
+DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@
+
+dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
+dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p3509-0000+p3636-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0001.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-sim-vdk.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3737-0000+p3701-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3740-0002+p3701-0008.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_234_SOC) += tegra234-p3768-0000+p3767-0005.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
new file mode 100644
index 000000000..bbc2e9bef
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -0,0 +1,1195 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra132.dtsi"
+
+/ {
+	model = "NVIDIA Tegra132 Norrin";
+	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/as3722@40";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "disabled";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux: dpaux@545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: pinmux {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "kb_col4_pq4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5",
+					      "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mic_det_l {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5",
+					      "usb_vbus_en2_pff1";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <1>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			chromeos_write_protect {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			soc_warm_reset_l {
+				nvidia,pins = "pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		as3722: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "gpio";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+
+				gpio6 {
+					pins = "gpio6";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_sys>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@7000d400 {
+		status = "okay";
+
+		ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c_20: i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: smart-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+				/*	power-supplies = <&charger>; */
+				};
+			};
+
+			keyboard-controller {
+				compatible = "google,cros-ec-keyb";
+				keypad,num-rows = <8>;
+				keypad,num-columns = <13>;
+				google,needs-ghost-filter;
+				linux,keymap =
+					<MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+					 MATRIX_KEY(0x00, 0x02, KEY_F1)
+					 MATRIX_KEY(0x00, 0x03, KEY_B)
+					 MATRIX_KEY(0x00, 0x04, KEY_F10)
+					 MATRIX_KEY(0x00, 0x06, KEY_N)
+					 MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+					 MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+					 MATRIX_KEY(0x01, 0x01, KEY_ESC)
+					 MATRIX_KEY(0x01, 0x02, KEY_F4)
+					 MATRIX_KEY(0x01, 0x03, KEY_G)
+					 MATRIX_KEY(0x01, 0x04, KEY_F7)
+					 MATRIX_KEY(0x01, 0x06, KEY_H)
+					 MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+					 MATRIX_KEY(0x01, 0x09, KEY_F9)
+					 MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+					 MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+					 MATRIX_KEY(0x02, 0x01, KEY_TAB)
+					 MATRIX_KEY(0x02, 0x02, KEY_F3)
+					 MATRIX_KEY(0x02, 0x03, KEY_T)
+					 MATRIX_KEY(0x02, 0x04, KEY_F6)
+					 MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+					 MATRIX_KEY(0x02, 0x06, KEY_Y)
+					 MATRIX_KEY(0x02, 0x07, KEY_102ND)
+					 MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+					 MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+					 MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+					 MATRIX_KEY(0x03, 0x02, KEY_F2)
+					 MATRIX_KEY(0x03, 0x03, KEY_5)
+					 MATRIX_KEY(0x03, 0x04, KEY_F5)
+					 MATRIX_KEY(0x03, 0x06, KEY_6)
+					 MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+					 MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+					 MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+					 MATRIX_KEY(0x04, 0x01, KEY_A)
+					 MATRIX_KEY(0x04, 0x02, KEY_D)
+					 MATRIX_KEY(0x04, 0x03, KEY_F)
+					 MATRIX_KEY(0x04, 0x04, KEY_S)
+					 MATRIX_KEY(0x04, 0x05, KEY_K)
+					 MATRIX_KEY(0x04, 0x06, KEY_J)
+					 MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+					 MATRIX_KEY(0x04, 0x09, KEY_L)
+					 MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+					 MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+					 MATRIX_KEY(0x05, 0x01, KEY_Z)
+					 MATRIX_KEY(0x05, 0x02, KEY_C)
+					 MATRIX_KEY(0x05, 0x03, KEY_V)
+					 MATRIX_KEY(0x05, 0x04, KEY_X)
+					 MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+					 MATRIX_KEY(0x05, 0x06, KEY_M)
+					 MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+					 MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+					 MATRIX_KEY(0x05, 0x09, KEY_DOT)
+					 MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+					 MATRIX_KEY(0x06, 0x01, KEY_1)
+					 MATRIX_KEY(0x06, 0x02, KEY_3)
+					 MATRIX_KEY(0x06, 0x03, KEY_4)
+					 MATRIX_KEY(0x06, 0x04, KEY_2)
+					 MATRIX_KEY(0x06, 0x05, KEY_8)
+					 MATRIX_KEY(0x06, 0x06, KEY_7)
+					 MATRIX_KEY(0x06, 0x08, KEY_0)
+					 MATRIX_KEY(0x06, 0x09, KEY_9)
+					 MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+					 MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+					 MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+					 MATRIX_KEY(0x07, 0x01, KEY_Q)
+					 MATRIX_KEY(0x07, 0x02, KEY_E)
+					 MATRIX_KEY(0x07, 0x03, KEY_R)
+					 MATRIX_KEY(0x07, 0x04, KEY_W)
+					 MATRIX_KEY(0x07, 0x05, KEY_I)
+					 MATRIX_KEY(0x07, 0x06, KEY_U)
+					 MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+					 MATRIX_KEY(0x07, 0x08, KEY_P)
+					 MATRIX_KEY(0x07, 0x09, KEY_O)
+					 MATRIX_KEY(0x07, 0x0b, KEY_UP)
+					 MATRIX_KEY(0x07, 0x0c, KEY_LEFT)>;
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* WIFI/BT module */
+	mmc@700b0000 {
+		status = "disabled";
+	};
+
+	/* external SD/MMC */
+	mmc@700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EMMC 4.51 */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <0>;
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n116bge";
+		power-supply = <&vdd_3v3_panel>;
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
+	vdd_mux: regulator-vdd-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <19000000>;
+		regulator-max-microvolt = <19000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_3v3_run: regulator-vdd-3v3-run {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_3v3_hdmi: regulator-vdd-3v3-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
+
+	vdd_led: regulator-vdd-led {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
+
+	vdd_usb1_vbus: regulator-vdd-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb3_vbus: regulator-vdd-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_panel: regulator-vdd-3v3-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi_pll: regulator-vdd-hdmi-pll {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
+
+	vdd_5v0_hdmi: regulator-vdd-5v0-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_5v0_ts: regulator-vdd-5v0-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_lp0: regulator-vdd-3v3-lp0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-peripherals-opp.dtsi b/arch/arm64/boot/dts/nvidia/tegra132-peripherals-opp.dtsi
new file mode 100644
index 000000000..66ffb7f8a
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132-peripherals-opp.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/* EMC DVFS OPP table */
+	emc_icc_dvfs_opp_table: opp-table-dvfs0 {
+		compatible = "operating-points-v2";
+
+		opp-12750000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-12750000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-12750000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-12750000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-20400000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-20400000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-20400000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-20400000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-40800000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-40800000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-40800000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-40800000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-68000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-68000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-68000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-68000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-102000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-102000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-102000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-102000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-204000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0003>;
+			opp-suspend;
+		};
+
+		opp-204000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0008>;
+			opp-suspend;
+		};
+
+		opp-204000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0010>;
+			opp-suspend;
+		};
+
+		opp-204000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x0004>;
+			opp-suspend;
+		};
+
+		opp-264000000-800 {
+			opp-microvolt = <800000 800000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-264000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-264000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-264000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-300000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-300000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-300000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-300000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-348000000-850 {
+			opp-microvolt = <850000 850000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-348000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-348000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-348000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-396000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-396000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-396000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-396000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-528000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-528000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-528000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-528000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-600000000-950 {
+			opp-microvolt = <950000 950000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0008>;
+		};
+
+		opp-600000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0003>;
+		};
+
+		opp-600000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-600000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-792000000-1000 {
+			opp-microvolt = <1000000 1000000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x000B>;
+		};
+
+		opp-792000000-1050 {
+			opp-microvolt = <1050000 1050000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0010>;
+		};
+
+		opp-792000000-1110 {
+			opp-microvolt = <1110000 1110000 1150000>;
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x0004>;
+		};
+
+		opp-924000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+		};
+
+		opp-1200000000-1100 {
+			opp-microvolt = <1100000 1100000 1150000>;
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+		};
+	};
+
+	/* EMC bandwidth OPP table */
+	emc_bw_dfs_opp_table: opp-table-dvfs1 {
+		compatible = "operating-points-v2";
+
+		opp-12750000 {
+			opp-hz = /bits/ 64 <12750000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <204000>;
+		};
+
+		opp-20400000 {
+			opp-hz = /bits/ 64 <20400000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <326400>;
+		};
+
+		opp-40800000 {
+			opp-hz = /bits/ 64 <40800000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <652800>;
+		};
+
+		opp-68000000 {
+			opp-hz = /bits/ 64 <68000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1088000>;
+		};
+
+		opp-102000000 {
+			opp-hz = /bits/ 64 <102000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		opp-204000000 {
+			opp-hz = /bits/ 64 <204000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <3264000>;
+			opp-suspend;
+		};
+
+		opp-264000000 {
+			opp-hz = /bits/ 64 <264000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4224000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <4800000>;
+		};
+
+		opp-348000000 {
+			opp-hz = /bits/ 64 <348000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <5568000>;
+		};
+
+		opp-396000000 {
+			opp-hz = /bits/ 64 <396000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <6336000>;
+		};
+
+		opp-528000000 {
+			opp-hz = /bits/ 64 <528000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <8448000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <9600000>;
+		};
+
+		opp-792000000 {
+			opp-hz = /bits/ 64 <792000000>;
+			opp-supported-hw = <0x001F>;
+			opp-peak-kBps = <12672000>;
+		};
+
+		opp-924000000 {
+			opp-hz = /bits/ 64 <924000000>;
+			opp-supported-hw = <0x0013>;
+			opp-peak-kBps = <14784000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-supported-hw = <0x0003>;
+			opp-peak-kBps = <19200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
new file mode 100644
index 000000000..8b78be8f4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -0,0 +1,1262 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+#include "tegra132-peripherals-opp.dtsi"
+
+/ {
+	compatible = "nvidia,tegra132", "nvidia,tegra124";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra132-host1x",
+			     "nvidia,tegra124-host1x";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		sor@54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_SOR0_OUT>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x0 0x60004000 0x0 0x100>,
+		      <0x0 0x60004100 0x0 0x100>,
+		      <0x0 0x60004200 0x0 0x100>,
+		      <0x0 0x60004300 0x0 0x100>,
+		      <0x0 0x60004400 0x0 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra132-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		nvidia,external-memory-controller = <&emc>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	actmon@6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+		operating-points-v2 = <&emc_bw_dfs_opp_table>;
+		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
+		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000dc00 0x0 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000de00 0x0 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra132-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+		#interconnect-cells = <1>;
+	};
+
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "emc";
+
+		nvidia,memory-controller = <&mc>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
+
+		#interconnect-cells = <0>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra124-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 129>,
+			 <&tegra_car 123>;
+		reset-names = "sata", "sata-cold", "sata-oob";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra132-hda", "nvidia,tegra124-hda",
+			     "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra132-xusb", "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra132-xusb-padctl",
+			     "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			ulpi {
+				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mmc@700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra132-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */
+		      <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg-names = "soctherm-reg", "ccroc-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "thermal", "edp";
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+		         <&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	ahub@70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		tegra_i2s0: i2s@70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301000 0x0 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			clock-names = "i2s";
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301100 0x0 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			clock-names = "i2s";
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301200 0x0 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			clock-names = "i2s";
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301300 0x0 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			clock-names = "i2s";
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301400 0x0 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			clock-names = "i2s";
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		nvidia,pmc = <&tegra_pmc 0>;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 1>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		clock-names = "usb";
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,pmc = <&tegra_pmc 2>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "nvidia,tegra132-denver";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "nvidia,tegra132-denver";
+			reg = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <102000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				mem_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+				mem_throttle_trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu_shutdown_trip {
+					temperature = <101000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx_shutdown_trip {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+				pllx_throttle_trip {
+					temperature = <99000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
new file mode 100644
index 000000000..15aa49fc4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -0,0 +1,2624 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra186-p3310.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX2 Developer Kit";
+	compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+
+	aconnect@2900000 {
+		status = "okay";
+
+		ahub@2900800 {
+			status = "okay";
+
+			i2s@2901000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s2_ep>;
+						};
+					};
+
+					i2s2_port: port@1 {
+						reg = <1>;
+
+						i2s2_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s4_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s4_ep>;
+						};
+					};
+
+					i2s4_port: port@1 {
+						reg = <1>;
+
+						i2s4_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s5_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s5_ep>;
+						};
+					};
+
+					i2s5_port: port@1 {
+						reg = <1>;
+
+						i2s5_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901500 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s6_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s6_ep>;
+						};
+					};
+
+					i2s6_port: port@1 {
+						reg = <1>;
+
+						i2s6_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			sfc@2902000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_in_ep>;
+							convert-rate = <44100>;
+						};
+					};
+
+					sfc1_out_port: port@1 {
+						reg = <1>;
+
+						sfc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_out_ep>;
+							convert-rate = <48000>;
+						};
+					};
+				};
+			};
+
+			sfc@2902200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_in_ep>;
+						};
+					};
+
+					sfc2_out_port: port@1 {
+						reg = <1>;
+
+						sfc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@2902400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc3_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_in_ep>;
+						};
+					};
+
+					sfc3_out_port: port@1 {
+						reg = <1>;
+
+						sfc3_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@2902600 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc4_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_in_ep>;
+						};
+					};
+
+					sfc4_out_port: port@1 {
+						reg = <1>;
+
+						sfc4_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx1_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx1_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx1_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx1_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in4_ep>;
+						};
+					};
+
+					amx1_out_port: port@4 {
+						reg = <4>;
+
+						amx1_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx2_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx2_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in2_ep>;
+						};
+					};
+
+					amx2_in3_port: port@2 {
+						reg = <2>;
+
+						amx2_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in3_ep>;
+						};
+					};
+
+					amx2_in4_port: port@3 {
+						reg = <3>;
+
+						amx2_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in4_ep>;
+						};
+					};
+
+					amx2_out_port: port@4 {
+						reg = <4>;
+
+						amx2_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx3_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx3_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx3_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx3_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_in4_ep>;
+						};
+					};
+
+					amx3_out_port: port@4 {
+						reg = <4>;
+
+						amx3_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx3_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@2903300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx4_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx4_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx4_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx4_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_in4_ep>;
+						};
+					};
+
+					amx4_out_port: port@4 {
+						reg = <4>;
+
+						amx4_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx4_out_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx1_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_in_ep>;
+						};
+					};
+
+					adx1_out1_port: port@1 {
+						reg = <1>;
+
+						adx1_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out1_ep>;
+						};
+					};
+
+					adx1_out2_port: port@2 {
+						reg = <2>;
+
+						adx1_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out2_ep>;
+						};
+					};
+
+					adx1_out3_port: port@3 {
+						reg = <3>;
+
+						adx1_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out3_ep>;
+						};
+					};
+
+					adx1_out4_port: port@4 {
+						reg = <4>;
+
+						adx1_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903900 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx2_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_in_ep>;
+						};
+					};
+
+					adx2_out1_port: port@1 {
+						reg = <1>;
+
+						adx2_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out1_ep>;
+						};
+					};
+
+					adx2_out2_port: port@2 {
+						reg = <2>;
+
+						adx2_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out2_ep>;
+						};
+					};
+
+					adx2_out3_port: port@3 {
+						reg = <3>;
+
+						adx2_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out3_ep>;
+						};
+					};
+
+					adx2_out4_port: port@4 {
+						reg = <4>;
+
+						adx2_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903a00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx3_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_in_ep>;
+						};
+					};
+
+					adx3_out1_port: port@1 {
+						reg = <1>;
+
+						adx3_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out1_ep>;
+						};
+					};
+
+					adx3_out2_port: port@2 {
+						reg = <2>;
+
+						adx3_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out2_ep>;
+						};
+					};
+
+					adx3_out3_port: port@3 {
+						reg = <3>;
+
+						adx3_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out3_ep>;
+						};
+					};
+
+					adx3_out4_port: port@4 {
+						reg = <4>;
+
+						adx3_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx3_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@2903b00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx4_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_in_ep>;
+						};
+					};
+
+					adx4_out1_port: port@1 {
+						reg = <1>;
+
+						adx4_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out1_ep>;
+						};
+					};
+
+					adx4_out2_port: port@2 {
+						reg = <2>;
+
+						adx4_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out2_ep>;
+						};
+					};
+
+					adx4_out3_port: port@3 {
+						reg = <3>;
+
+						adx4_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out3_ep>;
+						};
+					};
+
+					adx4_out4_port: port@4 {
+						reg = <4>;
+
+						adx4_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx4_out4_ep>;
+						};
+					};
+				};
+			};
+
+			dmic@2904000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic3_ep>;
+						};
+					};
+
+					dmic3_port: port@1 {
+						reg = <1>;
+
+						dmic3_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dspk@2905000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dspk1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dspk1_ep>;
+						};
+					};
+
+					dspk1_port: port@1 {
+						reg = <1>;
+
+						dspk1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dspk@2905100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dspk2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dspk2_ep>;
+						};
+					};
+
+					dspk2_port: port@1 {
+						reg = <1>;
+
+						dspk2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			processing-engine@2908000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_in_ep>;
+						};
+					};
+
+					ope1_out_port: port@1 {
+						reg = <0x1>;
+
+						ope1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@290a000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@290a200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amixer@290bb00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						mixer_in1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						mixer_in2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						mixer_in3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						mixer_in4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						mixer_in5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						mixer_in6_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						mixer_in7_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in7_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						mixer_in8_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in8_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						mixer_in9_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in9_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						mixer_in10_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in10_ep>;
+						};
+					};
+
+					mixer_out1_port: port@a {
+						reg = <0xa>;
+
+						mixer_out1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out1_ep>;
+						};
+					};
+
+					mixer_out2_port: port@b {
+						reg = <0xb>;
+
+						mixer_out2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out2_ep>;
+						};
+					};
+
+					mixer_out3_port: port@c {
+						reg = <0xc>;
+
+						mixer_out3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out3_ep>;
+						};
+					};
+
+					mixer_out4_port: port@d {
+						reg = <0xd>;
+
+						mixer_out4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out4_ep>;
+						};
+					};
+
+					mixer_out5_port: port@e {
+						reg = <0xe>;
+
+						mixer_out5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out5_ep>;
+						};
+					};
+				};
+			};
+
+			admaif@290f000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif0_port: port@0 {
+						reg = <0x0>;
+
+						admaif0_ep: endpoint {
+							remote-endpoint = <&xbar_admaif0_ep>;
+						};
+					};
+
+					admaif1_port: port@1 {
+						reg = <0x1>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@2 {
+						reg = <0x2>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@3 {
+						reg = <0x3>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@4 {
+						reg = <0x4>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@5 {
+						reg = <0x5>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@6 {
+						reg = <0x6>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@7 {
+						reg = <0x7>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@8 {
+						reg = <0x8>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@9 {
+						reg = <0x9>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@a {
+						reg = <0xa>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+
+					admaif11_port: port@b {
+						reg = <0xb>;
+
+						admaif11_ep: endpoint {
+							remote-endpoint = <&xbar_admaif11_ep>;
+						};
+					};
+
+					admaif12_port: port@c {
+						reg = <0xc>;
+
+						admaif12_ep: endpoint {
+							remote-endpoint = <&xbar_admaif12_ep>;
+						};
+					};
+
+					admaif13_port: port@d {
+						reg = <0xd>;
+
+						admaif13_ep: endpoint {
+							remote-endpoint = <&xbar_admaif13_ep>;
+						};
+					};
+
+					admaif14_port: port@e {
+						reg = <0xe>;
+
+						admaif14_ep: endpoint {
+							remote-endpoint = <&xbar_admaif14_ep>;
+						};
+					};
+
+					admaif15_port: port@f {
+						reg = <0xf>;
+
+						admaif15_ep: endpoint {
+							remote-endpoint = <&xbar_admaif15_ep>;
+						};
+					};
+
+					admaif16_port: port@10 {
+						reg = <0x10>;
+
+						admaif16_ep: endpoint {
+							remote-endpoint = <&xbar_admaif16_ep>;
+						};
+					};
+
+					admaif17_port: port@11 {
+						reg = <0x11>;
+
+						admaif17_ep: endpoint {
+							remote-endpoint = <&xbar_admaif17_ep>;
+						};
+					};
+
+					admaif18_port: port@12 {
+						reg = <0x12>;
+
+						admaif18_ep: endpoint {
+							remote-endpoint = <&xbar_admaif18_ep>;
+						};
+					};
+
+					admaif19_port: port@13 {
+						reg = <0x13>;
+
+						admaif19_ep: endpoint {
+							remote-endpoint = <&xbar_admaif19_ep>;
+						};
+					};
+				};
+			};
+
+			asrc@2910000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						asrc_in1_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						asrc_in2_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						asrc_in3_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						asrc_in4_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						asrc_in5_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						asrc_in6_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						asrc_in7_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_in7_ep>;
+						};
+					};
+
+					asrc_out1_port: port@7 {
+						reg = <0x7>;
+
+						asrc_out1_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out1_ep>;
+						};
+					};
+
+					asrc_out2_port: port@8 {
+						reg = <0x8>;
+
+						asrc_out2_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out2_ep>;
+						};
+					};
+
+					asrc_out3_port: port@9 {
+						reg = <0x9>;
+
+						asrc_out3_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out3_ep>;
+						};
+					};
+
+					asrc_out4_port: port@a {
+						reg = <0xa>;
+
+						asrc_out4_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out4_ep>;
+						};
+					};
+
+					asrc_out5_port: port@b {
+						reg = <0xb>;
+
+						asrc_out5_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out5_ep>;
+						};
+					};
+
+					asrc_out6_port: port@c {
+						reg = <0xc>;
+
+						asrc_out6_ep: endpoint {
+							remote-endpoint = <&xbar_asrc_out6_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif0_ep: endpoint {
+						remote-endpoint = <&admaif0_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@a {
+					reg = <0xa>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+
+				port@b {
+					reg = <0xb>;
+
+					xbar_admaif11_ep: endpoint {
+						remote-endpoint = <&admaif11_ep>;
+					};
+				};
+
+				port@c {
+					reg = <0xc>;
+
+					xbar_admaif12_ep: endpoint {
+						remote-endpoint = <&admaif12_ep>;
+					};
+				};
+
+				port@d {
+					reg = <0xd>;
+
+					xbar_admaif13_ep: endpoint {
+						remote-endpoint = <&admaif13_ep>;
+					};
+				};
+
+				port@e {
+					reg = <0xe>;
+
+					xbar_admaif14_ep: endpoint {
+						remote-endpoint = <&admaif14_ep>;
+					};
+				};
+
+				port@f {
+					reg = <0xf>;
+
+					xbar_admaif15_ep: endpoint {
+						remote-endpoint = <&admaif15_ep>;
+					};
+				};
+
+				port@10 {
+					reg = <0x10>;
+
+					xbar_admaif16_ep: endpoint {
+						remote-endpoint = <&admaif16_ep>;
+					};
+				};
+
+				port@11 {
+					reg = <0x11>;
+
+					xbar_admaif17_ep: endpoint {
+						remote-endpoint = <&admaif17_ep>;
+					};
+				};
+
+				port@12 {
+					reg = <0x12>;
+
+					xbar_admaif18_ep: endpoint {
+						remote-endpoint = <&admaif18_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_admaif19_ep: endpoint {
+						remote-endpoint = <&admaif19_ep>;
+					};
+				};
+
+				xbar_i2s1_port: port@14 {
+					reg = <0x14>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s2_port: port@15 {
+					reg = <0x15>;
+
+					xbar_i2s2_ep: endpoint {
+						remote-endpoint = <&i2s2_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@16 {
+					reg = <0x16>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@17 {
+					reg = <0x17>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_i2s5_port: port@18 {
+					reg = <0x18>;
+
+					xbar_i2s5_ep: endpoint {
+						remote-endpoint = <&i2s5_cif_ep>;
+					};
+				};
+
+				xbar_i2s6_port: port@19 {
+					reg = <0x19>;
+
+					xbar_i2s6_ep: endpoint {
+						remote-endpoint = <&i2s6_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@1b {
+					reg = <0x1b>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_dmic3_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_dmic3_ep: endpoint {
+						remote-endpoint = <&dmic3_cif_ep>;
+					};
+				};
+
+				xbar_dspk1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_dspk1_ep: endpoint {
+						remote-endpoint = <&dspk1_cif_ep>;
+					};
+				};
+
+				xbar_dspk2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_dspk2_ep: endpoint {
+						remote-endpoint = <&dspk2_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@20 {
+					reg = <0x20>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@21 {
+					reg = <0x21>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@22 {
+					reg = <0x22>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@23 {
+					reg = <0x23>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@24 {
+					reg = <0x24>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@25 {
+					reg = <0x25>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@26 {
+					reg = <0x26>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@2a {
+					reg = <0x2a>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@2c {
+					reg = <0x2c>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@2e {
+					reg = <0x2e>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@2f {
+					reg = <0x2f>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@31 {
+					reg = <0x31>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@32 {
+					reg = <0x32>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@33 {
+					reg = <0x33>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@34 {
+					reg = <0x34>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@35 {
+					reg = <0x35>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_amx3_in1_port: port@36 {
+					reg = <0x36>;
+
+					xbar_amx3_in1_ep: endpoint {
+						remote-endpoint = <&amx3_in1_ep>;
+					};
+				};
+
+				xbar_amx3_in2_port: port@37 {
+					reg = <0x37>;
+
+					xbar_amx3_in2_ep: endpoint {
+						remote-endpoint = <&amx3_in2_ep>;
+					};
+				};
+
+				xbar_amx3_in3_port: port@38 {
+					reg = <0x38>;
+
+					xbar_amx3_in3_ep: endpoint {
+						remote-endpoint = <&amx3_in3_ep>;
+					};
+				};
+
+				xbar_amx3_in4_port: port@39 {
+					reg = <0x39>;
+
+					xbar_amx3_in4_ep: endpoint {
+						remote-endpoint = <&amx3_in4_ep>;
+					};
+				};
+
+				port@3a {
+					reg = <0x3a>;
+
+					xbar_amx3_out_ep: endpoint {
+						remote-endpoint = <&amx3_out_ep>;
+					};
+				};
+
+				xbar_amx4_in1_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_amx4_in1_ep: endpoint {
+						remote-endpoint = <&amx4_in1_ep>;
+					};
+				};
+
+				xbar_amx4_in2_port: port@3c {
+					reg = <0x3c>;
+
+					xbar_amx4_in2_ep: endpoint {
+						remote-endpoint = <&amx4_in2_ep>;
+					};
+				};
+
+				xbar_amx4_in3_port: port@3d {
+					reg = <0x3d>;
+
+					xbar_amx4_in3_ep: endpoint {
+						remote-endpoint = <&amx4_in3_ep>;
+					};
+				};
+
+				xbar_amx4_in4_port: port@3e {
+					reg = <0x3e>;
+
+					xbar_amx4_in4_ep: endpoint {
+						remote-endpoint = <&amx4_in4_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_amx4_out_ep: endpoint {
+						remote-endpoint = <&amx4_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@40 {
+					reg = <0x40>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@41 {
+					reg = <0x41>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@43 {
+					reg = <0x43>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@45 {
+					reg = <0x45>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@46 {
+					reg = <0x46>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@47 {
+					reg = <0x47>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@48 {
+					reg = <0x48>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@49 {
+					reg = <0x49>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_adx3_in_port: port@4a {
+					reg = <0x4a>;
+
+					xbar_adx3_in_ep: endpoint {
+						remote-endpoint = <&adx3_in_ep>;
+					};
+				};
+
+				port@4b {
+					reg = <0x4b>;
+
+					xbar_adx3_out1_ep: endpoint {
+						remote-endpoint = <&adx3_out1_ep>;
+					};
+				};
+
+				port@4c {
+					reg = <0x4c>;
+
+					xbar_adx3_out2_ep: endpoint {
+						remote-endpoint = <&adx3_out2_ep>;
+					};
+				};
+
+				port@4d {
+					reg = <0x4d>;
+
+					xbar_adx3_out3_ep: endpoint {
+						remote-endpoint = <&adx3_out3_ep>;
+					};
+				};
+
+				port@4e {
+					reg = <0x4e>;
+
+					xbar_adx3_out4_ep: endpoint {
+						remote-endpoint = <&adx3_out4_ep>;
+					};
+				};
+
+				xbar_adx4_in_port: port@4f {
+					reg = <0x4f>;
+
+					xbar_adx4_in_ep: endpoint {
+						remote-endpoint = <&adx4_in_ep>;
+					};
+				};
+
+				port@50 {
+					reg = <0x50>;
+
+					xbar_adx4_out1_ep: endpoint {
+						remote-endpoint = <&adx4_out1_ep>;
+					};
+				};
+
+				port@51 {
+					reg = <0x51>;
+
+					xbar_adx4_out2_ep: endpoint {
+						remote-endpoint = <&adx4_out2_ep>;
+					};
+				};
+
+				port@52 {
+					reg = <0x52>;
+
+					xbar_adx4_out3_ep: endpoint {
+						remote-endpoint = <&adx4_out3_ep>;
+					};
+				};
+
+				port@53 {
+					reg = <0x53>;
+
+					xbar_adx4_out4_ep: endpoint {
+						remote-endpoint = <&adx4_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@54 {
+					reg = <0x54>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@55 {
+					reg = <0x55>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@56 {
+					reg = <0x56>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@57 {
+					reg = <0x57>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@58 {
+					reg = <0x58>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@59 {
+					reg = <0x59>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@5a {
+					reg = <0x5a>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@5b {
+					reg = <0x5b>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@5c {
+					reg = <0x5c>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@5d {
+					reg = <0x5d>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@5e {
+					reg = <0x5e>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@5f {
+					reg = <0x5f>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@60 {
+					reg = <0x60>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@61 {
+					reg = <0x61>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@62 {
+					reg = <0x62>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_asrc_in1_port: port@63 {
+					reg = <0x63>;
+
+					xbar_asrc_in1_ep: endpoint {
+						remote-endpoint = <&asrc_in1_ep>;
+					};
+				};
+
+				port@64 {
+					reg = <0x64>;
+
+					xbar_asrc_out1_ep: endpoint {
+						remote-endpoint = <&asrc_out1_ep>;
+					};
+				};
+
+				xbar_asrc_in2_port: port@65 {
+					reg = <0x65>;
+
+					xbar_asrc_in2_ep: endpoint {
+						remote-endpoint = <&asrc_in2_ep>;
+					};
+				};
+
+				port@66 {
+					reg = <0x66>;
+
+					xbar_asrc_out2_ep: endpoint {
+						remote-endpoint = <&asrc_out2_ep>;
+					};
+				};
+
+				xbar_asrc_in3_port: port@67 {
+					reg = <0x67>;
+
+					xbar_asrc_in3_ep: endpoint {
+						remote-endpoint = <&asrc_in3_ep>;
+					};
+				};
+
+				port@68 {
+					reg = <0x68>;
+
+					xbar_asrc_out3_ep: endpoint {
+						remote-endpoint = <&asrc_out3_ep>;
+					};
+				};
+
+				xbar_asrc_in4_port: port@69 {
+					reg = <0x69>;
+
+					xbar_asrc_in4_ep: endpoint {
+						remote-endpoint = <&asrc_in4_ep>;
+					};
+				};
+
+				port@6a {
+					reg = <0x6a>;
+
+					xbar_asrc_out4_ep: endpoint {
+						remote-endpoint = <&asrc_out4_ep>;
+					};
+				};
+
+				xbar_asrc_in5_port: port@6b {
+					reg = <0x6b>;
+
+					xbar_asrc_in5_ep: endpoint {
+						remote-endpoint = <&asrc_in5_ep>;
+					};
+				};
+
+				port@6c {
+					reg = <0x6c>;
+
+					xbar_asrc_out5_ep: endpoint {
+						remote-endpoint = <&asrc_out5_ep>;
+					};
+				};
+
+				xbar_asrc_in6_port: port@6d {
+					reg = <0x6d>;
+
+					xbar_asrc_in6_ep: endpoint {
+						remote-endpoint = <&asrc_in6_ep>;
+					};
+				};
+
+				port@6e {
+					reg = <0x6e>;
+
+					xbar_asrc_out6_ep: endpoint {
+						remote-endpoint = <&asrc_out6_ep>;
+					};
+				};
+
+				xbar_asrc_in7_port: port@6f {
+					reg = <0x6f>;
+
+					xbar_asrc_in7_ep: endpoint {
+						remote-endpoint = <&asrc_in7_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@70 {
+					reg = <0x70>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@71 {
+					reg = <0x71>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@2930000 {
+			status = "okay";
+		};
+
+		interrupt-controller@2a40000 {
+			status = "okay";
+		};
+	};
+
+	i2c@3160000 {
+		power-monitor@42 {
+			compatible = "ti,ina3221";
+			reg = <0x42>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_MUX";
+				shunt-resistor-micro-ohms = <20000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_5V0_IO_SYS";
+				shunt-resistor-micro-ohms = <5000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_3V3_SYS";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		power-monitor@43 {
+			compatible = "ti,ina3221";
+			reg = <0x43>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_3V3_IO_SLP";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_1V8_IO";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_M2_IN";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		exp1: gpio@74 {
+			compatible = "ti,tca9539";
+			reg = <0x74>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA186_MAIN_GPIO(Y, 0)
+				      GPIO_ACTIVE_LOW>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc-supply = <&vdd_3v3_sys>;
+		};
+
+		exp2: gpio@77 {
+			compatible = "ti,tca9539";
+			reg = <0x77>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA186_MAIN_GPIO(Y, 6)
+				      GPIO_ACTIVE_LOW>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc-supply = <&vdd_1v8>;
+		};
+	};
+
+	/* SDMMC1 (SD/MMC) */
+	mmc@3400000 {
+		status = "okay";
+
+		vmmc-supply = <&vdd_sd>;
+	};
+
+	sata@3507000 {
+		status = "okay";
+	};
+
+	hda@3510000 {
+		nvidia,model = "NVIDIA Jetson TX2 HDA";
+		status = "okay";
+	};
+
+	padctl@3520000 {
+		status = "okay";
+
+		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		vclamp-usb-supply = <&vdd_1v8>;
+		vddio-hsic-supply = <&gnd>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			usb3 {
+				status = "okay";
+
+				lanes {
+					usb3-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb3-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb3-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				vbus-supply = <&vdd_usb0>;
+				usb-role-switch;
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio
+						      TEGRA186_MAIN_GPIO(X, 7)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb1>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_usb1>;
+				status = "okay";
+			};
+		};
+	};
+
+	usb@3530000 {
+		status = "okay";
+
+		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@3520000/pads/usb3/lanes/usb3-0}>;
+		phy-names = "usb2-0", "usb2-1", "usb3-0";
+	};
+
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
+	i2c@c250000 {
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	pcie@10003000 {
+		status = "okay";
+
+		dvdd-pex-supply = <&vdd_pex>;
+		hvdd-pex-pll-supply = <&vdd_1v8>;
+		hvdd-pex-supply = <&vdd_1v8>;
+		vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <0>;
+			status = "disabled";
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+			status = "disabled";
+		};
+	};
+
+	host1x@13e00000 {
+		status = "okay";
+
+		dpaux@15040000 {
+			status = "okay";
+		};
+
+		display-hub@15200000 {
+			status = "okay";
+		};
+
+		dsi@15300000 {
+			status = "disabled";
+		};
+
+		/* DP on E3320 */
+		sor@15540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+
+			nvidia,dpaux = <&dpaux>;
+		};
+
+		sor@15580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1)
+						 GPIO_ACTIVE_LOW>;
+		};
+
+		dpaux@155c0000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	vdd_sd: regulator-vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "SD_CARD_SW_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb0: regulator-vdd-usb0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb1: regulator-vdd-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>,
+		       <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_i2s6_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic3_port>,
+		       <&xbar_dspk1_port>, <&xbar_dspk2_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* I/O */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
+		       <&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
+		       <&dmic3_port>, <&dspk1_port>, <&dspk2_port>;
+
+		label = "NVIDIA Jetson TX2 APE";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
new file mode 100644
index 000000000..e2d6857a3
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra186.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	model = "NVIDIA Jetson TX2";
+	compatible = "nvidia,p3310", "nvidia,tegra186";
+
+	aliases {
+		ethernet0 = "/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/i2c@3160000";
+		i2c2 = "/i2c@c240000";
+		i2c3 = "/i2c@3180000";
+		i2c4 = "/i2c@3190000";
+		i2c5 = "/i2c@31c0000";
+		i2c6 = "/i2c@c250000";
+		i2c7 = "/i2c@31e0000";
+		mmc0 = "/mmc@3460000";
+		mmc1 = "/mmc@3400000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200n8 fw_devlink=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	ethernet@2490000 {
+		status = "okay";
+
+		phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4)
+					 GPIO_ACTIVE_LOW>;
+		phy-handle = <&phy>;
+		phy-mode = "rgmii";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0x0>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA186_MAIN_GPIO(M, 5)
+					      IRQ_TYPE_LEVEL_LOW>;
+
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	memory-controller@2c00000 {
+		status = "okay";
+	};
+
+	serial@3100000 {
+		status = "okay";
+	};
+
+	i2c@3160000 {
+		status = "okay";
+
+		power-monitor@40 {
+			compatible = "ti,ina3221";
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_SYS_GPU";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_SYS_SOC";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_3V8_WIFI";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+
+		power-monitor@41 {
+			compatible = "ti,ina3221";
+			reg = <0x41>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0x0>;
+				label = "VDD_IN";
+				shunt-resistor-micro-ohms = <5000>;
+			};
+
+			input@1 {
+				reg = <0x1>;
+				label = "VDD_SYS_CPU";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+
+			input@2 {
+				reg = <0x2>;
+				label = "VDD_5V0_DDR";
+				shunt-resistor-micro-ohms = <10000>;
+			};
+		};
+	};
+
+	i2c@3180000 {
+		status = "okay";
+	};
+
+	ddc: i2c@3190000 {
+		status = "okay";
+	};
+
+	i2c@31c0000 {
+		status = "okay";
+	};
+
+	i2c@31e0000 {
+		status = "okay";
+	};
+
+	/* SDMMC1 (SD/MMC) */
+	mmc@3400000 {
+		cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+
+		vqmmc-supply = <&vddio_sdmmc1>;
+	};
+
+	/* SDMMC3 (SDIO) */
+	mmc@3440000 {
+		status = "okay";
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* SDMMC4 (eMMC) */
+	mmc@3460000 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+
+		vqmmc-supply = <&vdd_1v8_ap>;
+		vmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	hsp@3c00000 {
+		status = "okay";
+	};
+
+	i2c@c240000 {
+		status = "okay";
+	};
+
+	i2c@c250000 {
+		status = "okay";
+
+		/* module ID EEPROM */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	rtc@c2a0000 {
+		status = "okay";
+	};
+
+	pmc@c360000 {
+		nvidia,invert-interrupt;
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max77620";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max77620_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max77620_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_1v8>;
+					in-ldo7-8-supply = <&avdd_dsi_csi>;
+
+					sd0 {
+						regulator-name = "VDD_DDR_1V1_PMIC";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_dsi_csi: sd1 {
+						regulator-name = "AVDD_DSI_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					vdd_1v8: sd2 {
+						regulator-name = "VDD_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					vdd_3v3_sys: sd3 {
+						regulator-name = "VDD_3V3_SYS";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_1v8_pll: ldo0 {
+						regulator-name = "VDD_1V8_AP_PLL";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_3V3_AOHV";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vddio_sdmmc1: ldo3 {
+						regulator-name = "VDDIO_SDMMC1_AP";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo4 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+					};
+
+					vddio_sdmmc3: ldo5 {
+						regulator-name = "VDDIO_SDMMC3_AP";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					vdd_hdmi_1v05: ldo7 {
+						regulator-name = "VDD_HDMI_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					vdd_pex: ldo8 {
+						regulator-name = "VDD_PEX_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	gnd: regulator-gnd {
+		compatible = "regulator-fixed";
+		regulator-name = "GND";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8_ap: regulator-vdd-1v8-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AP";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
new file mode 100644
index 000000000..26f716519
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra186.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX2 NX Developer Kit";
+	compatible = "nvidia,p3509-0000+p3636-0001", "nvidia,tegra186";
+
+	aliases {
+		ethernet0 = "/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/i2c@3160000";
+		i2c2 = "/i2c@c240000";
+		i2c3 = "/i2c@3180000";
+		i2c4 = "/i2c@3190000";
+		i2c5 = "/i2c@31c0000";
+		i2c6 = "/i2c@c250000";
+		i2c7 = "/i2c@31e0000";
+		mmc0 = "/mmc@3460000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x70000000>;
+	};
+
+	ethernet@2490000 {
+		status = "okay";
+
+		phy-reset-gpios = <&gpio_aon TEGRA186_AON_GPIO(AA, 6) GPIO_ACTIVE_LOW>;
+		phy-handle = <&phy>;
+		phy-mode = "rgmii-id";
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0x0>;
+				interrupt-parent = <&gpio_aon>;
+				interrupts = <TEGRA186_AON_GPIO(AA, 7) IRQ_TYPE_LEVEL_LOW>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	aconnect@2900000 {
+		status = "okay";
+
+		ahub@2900800 {
+			status = "okay";
+
+			i2s@2901000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@2901200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@2904100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Place holder for external Codec */
+						};
+					};
+				};
+			};
+
+			admaif@290f000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif0_port: port@0 {
+						reg = <0x0>;
+
+						admaif0_ep: endpoint {
+							remote-endpoint = <&xbar_admaif0_ep>;
+						};
+					};
+
+					admaif1_port: port@1 {
+						reg = <0x1>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@2 {
+						reg = <0x2>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@3 {
+						reg = <0x3>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@4 {
+						reg = <0x4>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@5 {
+						reg = <0x5>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@6 {
+						reg = <0x6>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@7 {
+						reg = <0x7>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@8 {
+						reg = <0x8>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@9 {
+						reg = <0x9>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@a {
+						reg = <0xa>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+
+					admaif11_port: port@b {
+						reg = <0xb>;
+
+						admaif11_ep: endpoint {
+							remote-endpoint = <&xbar_admaif11_ep>;
+						};
+					};
+
+					admaif12_port: port@c {
+						reg = <0xc>;
+
+						admaif12_ep: endpoint {
+							remote-endpoint = <&xbar_admaif12_ep>;
+						};
+					};
+
+					admaif13_port: port@d {
+						reg = <0xd>;
+
+						admaif13_ep: endpoint {
+							remote-endpoint = <&xbar_admaif13_ep>;
+						};
+					};
+
+					admaif14_port: port@e {
+						reg = <0xe>;
+
+						admaif14_ep: endpoint {
+							remote-endpoint = <&xbar_admaif14_ep>;
+						};
+					};
+
+					admaif15_port: port@f {
+						reg = <0xf>;
+
+						admaif15_ep: endpoint {
+							remote-endpoint = <&xbar_admaif15_ep>;
+						};
+					};
+
+					admaif16_port: port@10 {
+						reg = <0x10>;
+
+						admaif16_ep: endpoint {
+							remote-endpoint = <&xbar_admaif16_ep>;
+						};
+					};
+
+					admaif17_port: port@11 {
+						reg = <0x11>;
+
+						admaif17_ep: endpoint {
+							remote-endpoint = <&xbar_admaif17_ep>;
+						};
+					};
+
+					admaif18_port: port@12 {
+						reg = <0x12>;
+
+						admaif18_ep: endpoint {
+							remote-endpoint = <&xbar_admaif18_ep>;
+						};
+					};
+
+					admaif19_port: port@13 {
+						reg = <0x13>;
+
+						admaif19_ep: endpoint {
+							remote-endpoint = <&xbar_admaif19_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif0_ep: endpoint {
+						remote-endpoint = <&admaif0_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@a {
+					reg = <0xa>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+
+				port@b {
+					reg = <0xb>;
+
+					xbar_admaif11_ep: endpoint {
+						remote-endpoint = <&admaif11_ep>;
+					};
+				};
+
+				port@c {
+					reg = <0xc>;
+
+					xbar_admaif12_ep: endpoint {
+						remote-endpoint = <&admaif12_ep>;
+					};
+				};
+
+				port@d {
+					reg = <0xd>;
+
+					xbar_admaif13_ep: endpoint {
+						remote-endpoint = <&admaif13_ep>;
+					};
+				};
+
+				port@e {
+					reg = <0xe>;
+
+					xbar_admaif14_ep: endpoint {
+						remote-endpoint = <&admaif14_ep>;
+					};
+				};
+
+				port@f {
+					reg = <0xf>;
+
+					xbar_admaif15_ep: endpoint {
+						remote-endpoint = <&admaif15_ep>;
+					};
+				};
+
+				port@10 {
+					reg = <0x10>;
+
+					xbar_admaif16_ep: endpoint {
+						remote-endpoint = <&admaif16_ep>;
+					};
+				};
+
+				port@11 {
+					reg = <0x11>;
+
+					xbar_admaif17_ep: endpoint {
+						remote-endpoint = <&admaif17_ep>;
+					};
+				};
+
+				port@12 {
+					reg = <0x12>;
+
+					xbar_admaif18_ep: endpoint {
+						remote-endpoint = <&admaif18_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_admaif19_ep: endpoint {
+						remote-endpoint = <&admaif19_ep>;
+					};
+				};
+
+				xbar_i2s1_port: port@14 {
+					reg = <0x14>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@16 {
+					reg = <0x16>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@1b {
+					reg = <0x1b>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@2930000 {
+			status = "okay";
+		};
+
+		interrupt-controller@2a40000 {
+			status = "okay";
+		};
+	};
+
+	memory-controller@2c00000 {
+		status = "okay";
+	};
+
+	timer@3010000 {
+		status = "okay";
+	};
+
+	serial@3100000 {
+		status = "okay";
+	};
+
+	i2c@3160000 {
+		status = "okay";
+	};
+
+	i2c@3180000 {
+		status = "okay";
+
+		power-monitor@40 {
+			compatible = "ti,ina3221";
+			reg = <0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			input@0 {
+				reg = <0>;
+				label = "VDD_IN";
+				shunt-resistor-micro-ohms = <5>;
+			};
+
+			input@1 {
+				reg = <1>;
+				label = "VDD_CPU_GPU";
+				shunt-resistor-micro-ohms = <5>;
+			};
+
+			input@2 {
+				reg = <2>;
+				label = "VDD_SOC";
+				shunt-resistor-micro-ohms = <5>;
+			};
+		};
+	};
+
+	ddc: i2c@3190000 {
+		status = "okay";
+	};
+
+	i2c@31c0000 {
+		status = "okay";
+	};
+
+	i2c@31e0000 {
+		status = "okay";
+	};
+
+	/* SDMMC4 (eMMC) */
+	mmc@3460000 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+
+		vqmmc-supply = <&vdd_1v8_ap>;
+		vmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	hda@3510000 {
+		nvidia,model = "NVIDIA Jetson TX2 NX HDA";
+		status = "okay";
+	};
+
+	padctl@3520000 {
+		status = "okay";
+
+		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		vclamp-usb-supply = <&vdd_1v8>;
+		vddio-hsic-supply = <&gnd>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			usb3 {
+				status = "okay";
+
+				lanes {
+					usb3-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+				vbus-supply = <&vdd_5v0_sys>;
+				usb-role-switch;
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio
+						      TEGRA186_MAIN_GPIO(L, 4)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_5v0_sys>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_5v0_sys>;
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_5v0_sys>;
+				status = "okay";
+			};
+		};
+	};
+
+	usb@3530000 {
+		status = "okay";
+
+		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-1";
+	};
+
+	usb@3550000 {
+		status = "okay";
+
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+	};
+
+	hsp@3c00000 {
+		status = "okay";
+	};
+
+	i2c@c240000 {
+		status = "okay";
+	};
+
+	i2c@c250000 {
+		status = "okay";
+
+		/* module ID EEPROM */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	rtc@c2a0000 {
+		status = "okay";
+	};
+
+	pwm@c340000 {
+		status = "okay";
+	};
+
+	pmc@c360000 {
+		nvidia,invert-interrupt;
+	};
+
+	pcie@10003000 {
+		status = "okay";
+
+		dvdd-pex-supply = <&vdd_pex>;
+		hvdd-pex-pll-supply = <&vdd_1v8>;
+		hvdd-pex-supply = <&vdd_1v8>;
+		vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <2>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+			status = "disabled";
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+			status = "okay";
+		};
+	};
+
+	host1x@13e00000 {
+		status = "okay";
+
+		dpaux@15040000 {
+			status = "okay";
+		};
+
+		display-hub@15200000 {
+			status = "okay";
+		};
+
+		dsi@15300000 {
+			status = "disabled";
+		};
+
+		/* DP */
+		sor@15540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+
+			nvidia,dpaux = <&dpaux>;
+		};
+
+		/* HDMI */
+		sor@15580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA186_MAIN_GPIO(P, 1)
+						 GPIO_ACTIVE_LOW>;
+		};
+
+		dpaux@155c0000 {
+			status = "okay";
+		};
+	};
+
+	gpu@17000000 {
+		status = "okay";
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max77620";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max77620_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max77620_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio5 {
+						pins = "gpio5";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_1v8>;
+					in-ldo7-8-supply = <&avdd_dsi_csi>;
+
+					sd0 {
+						regulator-name = "VDD_DDR_1V1_PMIC";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					avdd_dsi_csi: sd1 {
+						regulator-name = "AVDD_DSI_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					vdd_1v8: sd2 {
+						regulator-name = "VDD_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					vdd_3v3_sys: sd3 {
+						regulator-name = "VDD_3V3_SYS";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_1v8_pll: ldo0 {
+						regulator-name = "VDD_1V8_AP_PLL";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_3V3_AOHV";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vddio_sdmmc1: ldo3 {
+						regulator-name = "VDDIO_SDMMC1_AP";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo4 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+					};
+
+					vddio_sdmmc3: ldo5 {
+						regulator-name = "VDDIO_SDMMC3_AP";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					vdd_hdmi_1v05: ldo7 {
+						regulator-name = "VDD_HDMI_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					vdd_pex: ldo8 {
+						regulator-name = "VDD_PEX_1V05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+			};
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			enable-method = "psci";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	gnd: regulator-gnd {
+		compatible = "regulator-fixed";
+		regulator-name = "GND";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8_ap: regulator-vdd-1v8-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AP";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_1v8>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s3_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>,
+		       /* I/O */
+		       <&i2s1_port>, <&i2s3_port>,
+		       <&dmic1_port>, <&dmic2_port>;
+
+		label = "NVIDIA Jetson TX2 NX APE";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <79000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <62000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <45000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
new file mode 100644
index 000000000..2b3bb5d0a
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -0,0 +1,2183 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra186-clock.h>
+#include <dt-bindings/gpio/tegra186-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/tegra186-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/power/tegra186-powergate.h>
+#include <dt-bindings/reset/tegra186-reset.h>
+#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
+
+/ {
+	compatible = "nvidia,tegra186";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	misc@100000 {
+		compatible = "nvidia,tegra186-misc";
+		reg = <0x0 0x00100000 0x0 0xf000>,
+		      <0x0 0x0010f000 0x0 0x1000>;
+	};
+
+	gpio: gpio@2200000 {
+		compatible = "nvidia,tegra186-gpio";
+		reg-names = "security", "gpio";
+		reg = <0x0 0x2200000 0x0 0x10000>,
+		      <0x0 0x2210000 0x0 0x10000>;
+		interrupts = <GIC_SPI  47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI  59 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	ethernet@2490000 {
+		compatible = "nvidia,tegra186-eqos",
+			     "snps,dwc-qos-ethernet-4.10";
+		reg = <0x0 0x02490000 0x0 0x10000>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* common */
+			     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, /* power */
+			     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, /* rx0 */
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, /* tx0 */
+			     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* rx1 */
+			     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, /* tx1 */
+			     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* rx2 */
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* tx2 */
+			     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* rx3 */
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; /* tx3 */
+		clocks = <&bpmp TEGRA186_CLK_AXI_CBB>,
+			 <&bpmp TEGRA186_CLK_EQOS_AXI>,
+			 <&bpmp TEGRA186_CLK_EQOS_RX>,
+			 <&bpmp TEGRA186_CLK_EQOS_TX>,
+			 <&bpmp TEGRA186_CLK_EQOS_PTP_REF>;
+		clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+		resets = <&bpmp TEGRA186_RESET_EQOS>;
+		reset-names = "eqos";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_EQOS>;
+		status = "disabled";
+
+		snps,write-requests = <1>;
+		snps,read-requests = <3>;
+		snps,burst-map = <0x7>;
+		snps,txpbl = <32>;
+		snps,rxpbl = <8>;
+	};
+
+	gpcdma: dma-controller@2600000 {
+		compatible = "nvidia,tegra186-gpcdma";
+		reg = <0x0 0x2600000 0x0 0x210000>;
+		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+		reset-names = "gpcdma";
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+		dma-coherent;
+		dma-channel-mask = <0xfffffffe>;
+		status = "okay";
+	};
+
+	aconnect@2900000 {
+		compatible = "nvidia,tegra186-aconnect",
+			     "nvidia,tegra210-aconnect";
+		clocks = <&bpmp TEGRA186_CLK_APE>,
+			 <&bpmp TEGRA186_CLK_APB2APE>;
+		clock-names = "ape", "apb2ape";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x02900000 0x0 0x02900000 0x200000>;
+		status = "disabled";
+
+		tegra_ahub: ahub@2900800 {
+			compatible = "nvidia,tegra186-ahub";
+			reg = <0x02900800 0x800>;
+			clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			clock-names = "ahub";
+			assigned-clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+			assigned-clock-rates = <81600000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x02900800 0x02900800 0x11800>;
+			status = "disabled";
+
+			tegra_i2s1: i2s@2901000 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901000 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S1>,
+					 <&bpmp TEGRA186_CLK_I2S1_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S1";
+				status = "disabled";
+			};
+
+			tegra_i2s2: i2s@2901100 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901100 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S2>,
+					 <&bpmp TEGRA186_CLK_I2S2_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S2";
+				status = "disabled";
+			};
+
+			tegra_i2s3: i2s@2901200 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901200 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S3>,
+					 <&bpmp TEGRA186_CLK_I2S3_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S3>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S3";
+				status = "disabled";
+			};
+
+			tegra_i2s4: i2s@2901300 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901300 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S4>,
+					 <&bpmp TEGRA186_CLK_I2S4_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S4>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S4";
+				status = "disabled";
+			};
+
+			tegra_i2s5: i2s@2901400 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901400 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S5>,
+					 <&bpmp TEGRA186_CLK_I2S5_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S5>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S5";
+				status = "disabled";
+			};
+
+			tegra_i2s6: i2s@2901500 {
+				compatible = "nvidia,tegra186-i2s",
+					     "nvidia,tegra210-i2s";
+				reg = <0x2901500 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_I2S6>,
+					 <&bpmp TEGRA186_CLK_I2S6_SYNC_INPUT>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&bpmp TEGRA186_CLK_I2S6>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S6";
+				status = "disabled";
+			};
+
+			tegra_sfc1: sfc@2902000 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902000 0x200>;
+				sound-name-prefix = "SFC1";
+				status = "disabled";
+			};
+
+			tegra_sfc2: sfc@2902200 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902200 0x200>;
+				sound-name-prefix = "SFC2";
+				status = "disabled";
+			};
+
+			tegra_sfc3: sfc@2902400 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902400 0x200>;
+				sound-name-prefix = "SFC3";
+				status = "disabled";
+			};
+
+			tegra_sfc4: sfc@2902600 {
+				compatible = "nvidia,tegra186-sfc",
+					     "nvidia,tegra210-sfc";
+				reg = <0x2902600 0x200>;
+				sound-name-prefix = "SFC4";
+				status = "disabled";
+			};
+
+			tegra_amx1: amx@2903000 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903000 0x100>;
+				sound-name-prefix = "AMX1";
+				status = "disabled";
+			};
+
+			tegra_amx2: amx@2903100 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903100 0x100>;
+				sound-name-prefix = "AMX2";
+				status = "disabled";
+			};
+
+			tegra_amx3: amx@2903200 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903200 0x100>;
+				sound-name-prefix = "AMX3";
+				status = "disabled";
+			};
+
+			tegra_amx4: amx@2903300 {
+				compatible = "nvidia,tegra186-amx",
+					     "nvidia,tegra210-amx";
+				reg = <0x2903300 0x100>;
+				sound-name-prefix = "AMX4";
+				status = "disabled";
+			};
+
+			tegra_adx1: adx@2903800 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903800 0x100>;
+				sound-name-prefix = "ADX1";
+				status = "disabled";
+			};
+
+			tegra_adx2: adx@2903900 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903900 0x100>;
+				sound-name-prefix = "ADX2";
+				status = "disabled";
+			};
+
+			tegra_adx3: adx@2903a00 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903a00 0x100>;
+				sound-name-prefix = "ADX3";
+				status = "disabled";
+			};
+
+			tegra_adx4: adx@2903b00 {
+				compatible = "nvidia,tegra186-adx",
+					     "nvidia,tegra210-adx";
+				reg = <0x2903b00 0x100>;
+				sound-name-prefix = "ADX4";
+				status = "disabled";
+			};
+
+			tegra_dmic1: dmic@2904000 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904000 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC1";
+				status = "disabled";
+			};
+
+			tegra_dmic2: dmic@2904100 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904100 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC2";
+				status = "disabled";
+			};
+
+			tegra_dmic3: dmic@2904200 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904200 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC3>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC3";
+				status = "disabled";
+			};
+
+			tegra_dmic4: dmic@2904300 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x2904300 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+				clock-names = "dmic";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DMIC4>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC4";
+				status = "disabled";
+			};
+
+			tegra_dspk1: dspk@2905000 {
+				compatible = "nvidia,tegra186-dspk";
+				reg = <0x2905000 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+				clock-names = "dspk";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK1>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <12288000>;
+				sound-name-prefix = "DSPK1";
+				status = "disabled";
+			};
+
+			tegra_dspk2: dspk@2905100 {
+				compatible = "nvidia,tegra186-dspk";
+				reg = <0x2905100 0x100>;
+				clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+				clock-names = "dspk";
+				assigned-clocks = <&bpmp TEGRA186_CLK_DSPK2>;
+				assigned-clock-parents = <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <12288000>;
+				sound-name-prefix = "DSPK2";
+				status = "disabled";
+			};
+
+			tegra_ope1: processing-engine@2908000 {
+				compatible = "nvidia,tegra186-ope",
+					     "nvidia,tegra210-ope";
+				reg = <0x2908000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				sound-name-prefix = "OPE1";
+				status = "disabled";
+
+				equalizer@2908100 {
+					compatible = "nvidia,tegra186-peq",
+						     "nvidia,tegra210-peq";
+					reg = <0x2908100 0x100>;
+				};
+
+				dynamic-range-compressor@2908200 {
+					compatible = "nvidia,tegra186-mbdrc",
+						     "nvidia,tegra210-mbdrc";
+					reg = <0x2908200 0x200>;
+				};
+			};
+
+			tegra_mvc1: mvc@290a000 {
+				compatible = "nvidia,tegra186-mvc",
+					     "nvidia,tegra210-mvc";
+				reg = <0x290a000 0x200>;
+				sound-name-prefix = "MVC1";
+				status = "disabled";
+			};
+
+			tegra_mvc2: mvc@290a200 {
+				compatible = "nvidia,tegra186-mvc",
+					     "nvidia,tegra210-mvc";
+				reg = <0x290a200 0x200>;
+				sound-name-prefix = "MVC2";
+				status = "disabled";
+			};
+
+			tegra_amixer: amixer@290bb00 {
+				compatible = "nvidia,tegra186-amixer",
+					     "nvidia,tegra210-amixer";
+				reg = <0x290bb00 0x800>;
+				sound-name-prefix = "MIXER1";
+				status = "disabled";
+			};
+
+			tegra_admaif: admaif@290f000 {
+				compatible = "nvidia,tegra186-admaif";
+				reg = <0x0290f000 0x1000>;
+				dmas = <&adma 1>, <&adma 1>,
+				       <&adma 2>, <&adma 2>,
+				       <&adma 3>, <&adma 3>,
+				       <&adma 4>, <&adma 4>,
+				       <&adma 5>, <&adma 5>,
+				       <&adma 6>, <&adma 6>,
+				       <&adma 7>, <&adma 7>,
+				       <&adma 8>, <&adma 8>,
+				       <&adma 9>, <&adma 9>,
+				       <&adma 10>, <&adma 10>,
+				       <&adma 11>, <&adma 11>,
+				       <&adma 12>, <&adma 12>,
+				       <&adma 13>, <&adma 13>,
+				       <&adma 14>, <&adma 14>,
+				       <&adma 15>, <&adma 15>,
+				       <&adma 16>, <&adma 16>,
+				       <&adma 17>, <&adma 17>,
+				       <&adma 18>, <&adma 18>,
+				       <&adma 19>, <&adma 19>,
+				       <&adma 20>, <&adma 20>;
+				dma-names = "rx1", "tx1",
+					    "rx2", "tx2",
+					    "rx3", "tx3",
+					    "rx4", "tx4",
+					    "rx5", "tx5",
+					    "rx6", "tx6",
+					    "rx7", "tx7",
+					    "rx8", "tx8",
+					    "rx9", "tx9",
+					    "rx10", "tx10",
+					    "rx11", "tx11",
+					    "rx12", "tx12",
+					    "rx13", "tx13",
+					    "rx14", "tx14",
+					    "rx15", "tx15",
+					    "rx16", "tx16",
+					    "rx17", "tx17",
+					    "rx18", "tx18",
+					    "rx19", "tx19",
+					    "rx20", "tx20";
+				status = "disabled";
+			};
+
+			tegra_asrc: asrc@2910000 {
+				compatible = "nvidia,tegra186-asrc";
+				reg = <0x2910000 0x2000>;
+				sound-name-prefix = "ASRC1";
+				status = "disabled";
+			};
+		};
+
+		adma: dma-controller@2930000 {
+			compatible = "nvidia,tegra186-adma";
+			reg = <0x02930000 0x20000>;
+			interrupt-parent = <&agic>;
+			interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&bpmp TEGRA186_CLK_AHUB>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: interrupt-controller@2a40000 {
+			compatible = "nvidia,tegra186-agic",
+				     "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x02a41000 0x1000>,
+			      <0x02a42000 0x2000>;
+			interrupts = <GIC_SPI 145
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&bpmp TEGRA186_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
+	};
+
+	mc: memory-controller@2c00000 {
+		compatible = "nvidia,tegra186-mc";
+		reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+		      <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+		      <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+		      <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+		      <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+		      <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+		reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		#interconnect-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
+
+		/*
+		 * Memory clients have access to all 40 bits that the memory
+		 * controller can address.
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		emc: external-memory-controller@2c60000 {
+			compatible = "nvidia,tegra186-emc";
+			reg = <0x0 0x02c60000 0x0 0x50000>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_EMC>;
+			clock-names = "emc";
+
+			#interconnect-cells = <0>;
+
+			nvidia,bpmp = <&bpmp>;
+		};
+	};
+
+	timer@3010000 {
+		compatible = "nvidia,tegra186-timer";
+		reg = <0x0 0x03010000 0x0 0x000e0000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
+	};
+
+	uarta: serial@3100000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03100000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTA>;
+		resets = <&bpmp TEGRA186_RESET_UARTA>;
+		status = "disabled";
+	};
+
+	uartb: serial@3110000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03110000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTB>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTB>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartd: serial@3130000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03130000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTD>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTD>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uarte: serial@3140000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03140000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTE>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTE>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartf: serial@3150000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x03150000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTF>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTF>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	gen1_i2c: i2c@3160000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x03160000 0x0 0x10000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C1>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 21>, <&gpcdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	cam_i2c: i2c@3180000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x03180000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C3>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 23>, <&gpcdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/* shares pads with dpaux1 */
+	dp_aux_ch1_i2c: i2c@3190000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x03190000 0x0 0x10000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C4>;
+		reset-names = "i2c";
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&state_dpaux1_i2c>;
+		pinctrl-1 = <&state_dpaux1_off>;
+		dmas = <&gpcdma 26>, <&gpcdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/* controlled by BPMP, should not be enabled */
+	pwr_i2c: i2c@31a0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C5>;
+		reset-names = "i2c";
+		status = "disabled";
+	};
+
+	/* shares pads with dpaux0 */
+	dp_aux_ch0_i2c: i2c@31b0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C6>;
+		reset-names = "i2c";
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&state_dpaux_i2c>;
+		pinctrl-1 = <&state_dpaux_off>;
+		dmas = <&gpcdma 30>, <&gpcdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gen7_i2c: i2c@31c0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C7>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C7>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 27>, <&gpcdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gen9_i2c: i2c@31e0000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x031e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C9>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C9>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 31>, <&gpcdma 31>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm1: pwm@3280000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x3280000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM1>;
+		resets = <&bpmp TEGRA186_RESET_PWM1>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm2: pwm@3290000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x3290000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM2>;
+		resets = <&bpmp TEGRA186_RESET_PWM2>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm3: pwm@32a0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32a0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM3>;
+		resets = <&bpmp TEGRA186_RESET_PWM3>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm5: pwm@32c0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32c0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM5>;
+		resets = <&bpmp TEGRA186_RESET_PWM5>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm6: pwm@32d0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32d0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM6>;
+		resets = <&bpmp TEGRA186_RESET_PWM6>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm7: pwm@32e0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32e0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM7>;
+		resets = <&bpmp TEGRA186_RESET_PWM7>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pwm8: pwm@32f0000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0x32f0000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM8>;
+		resets = <&bpmp TEGRA186_RESET_PWM8>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	sdmmc1: mmc@3400000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03400000 0x0 0x10000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC1>;
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc1_3v3>;
+		pinctrl-1 = <&sdmmc1_1v8>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
+		nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
+		assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+				  <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+		status = "disabled";
+	};
+
+	sdmmc2: mmc@3420000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03420000 0x0 0x10000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC2>;
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc2_3v3>;
+		pinctrl-1 = <&sdmmc2_1v8>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
+		status = "disabled";
+	};
+
+	sdmmc3: mmc@3440000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03440000 0x0 0x10000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC3>;
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+		pinctrl-0 = <&sdmmc3_3v3>;
+		pinctrl-1 = <&sdmmc3_1v8>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
+		status = "disabled";
+	};
+
+	sdmmc4: mmc@3460000 {
+		compatible = "nvidia,tegra186-sdhci";
+		reg = <0x0 0x03460000 0x0 0x10000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+			 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+		clock-names = "sdhci", "tmclk";
+		assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+				  <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+		resets = <&bpmp TEGRA186_RESET_SDMMC4>;
+		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SDMMC4>;
+		nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
+		nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
+		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+		nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
+		nvidia,default-tap = <0x9>;
+		nvidia,default-trim = <0x5>;
+		nvidia,dqs-trim = <63>;
+		mmc-hs400-1_8v;
+		supports-cqe;
+		status = "disabled";
+	};
+
+	sata@3507000 {
+		compatible = "nvidia,tegra186-ahci";
+		reg = <0x0 0x03507000 0x0 0x00002000>, /* AHCI */
+		      <0x0 0x03500000 0x0 0x00007000>, /* SATA */
+		      <0x0 0x03A90000 0x0 0x00010000>; /* SATA AUX */
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_SAX>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SATAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SATAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_SATA>;
+
+		clocks = <&bpmp TEGRA186_CLK_SATA>,
+			 <&bpmp TEGRA186_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		assigned-clocks = <&bpmp TEGRA186_CLK_SATA>,
+				  <&bpmp TEGRA186_CLK_SATA_OOB>;
+		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>,
+					 <&bpmp TEGRA186_CLK_PLLP>;
+		assigned-clock-rates = <102000000>,
+				       <204000000>;
+		resets = <&bpmp TEGRA186_RESET_SATA>,
+			<&bpmp TEGRA186_RESET_SATACOLD>;
+		reset-names = "sata", "sata-cold";
+		status = "disabled";
+	};
+
+	hda@3510000 {
+		compatible = "nvidia,tegra186-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x03510000 0x0 0x10000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_HDA>,
+			 <&bpmp TEGRA186_CLK_HDA2HDMICODEC>,
+			 <&bpmp TEGRA186_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&bpmp TEGRA186_RESET_HDA>,
+			 <&bpmp TEGRA186_RESET_HDA2HDMICODEC>,
+			 <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_HDA>;
+		status = "disabled";
+	};
+
+	padctl: padctl@3520000 {
+		compatible = "nvidia,tegra186-xusb-padctl";
+		reg = <0x0 0x03520000 0x0 0x1000>,
+		      <0x0 0x03540000 0x0 0x1000>;
+		reg-names = "padctl", "ao";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+		resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>;
+		reset-names = "padctl";
+
+		status = "disabled";
+
+		pads {
+			usb2 {
+				clocks = <&bpmp TEGRA186_CLK_USB2_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			usb3 {
+				status = "disabled";
+
+				lanes {
+					usb3-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb3-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb3-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			usb3-2 {
+				status = "disabled";
+			};
+		};
+	};
+
+	usb@3530000 {
+		compatible = "nvidia,tegra186-xusb";
+		reg = <0x0 0x03530000 0x0 0x8000>,
+		      <0x0 0x03538000 0x0 0x1000>;
+		reg-names = "hcd", "fpci";
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
+			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
+			 <&bpmp TEGRA186_CLK_XUSB_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+			 <&bpmp TEGRA186_CLK_CLK_M>,
+			 <&bpmp TEGRA186_CLK_XUSB_FS>,
+			 <&bpmp TEGRA186_CLK_PLLU>,
+			 <&bpmp TEGRA186_CLK_CLK_M>,
+			 <&bpmp TEGRA186_CLK_PLLE>;
+		clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_src", "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
+				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+		power-domain-names = "xusb_host", "xusb_ss";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		nvidia,xusb-padctl = <&padctl>;
+	};
+
+	usb@3550000 {
+		compatible = "nvidia,tegra186-xudc";
+		reg = <0x0 0x03550000 0x0 0x8000>,
+		      <0x0 0x03558000 0x0 0x1000>;
+		reg-names = "base", "fpci";
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_XUSB_CORE_DEV>,
+			 <&bpmp TEGRA186_CLK_XUSB_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_CORE_SS>,
+			 <&bpmp TEGRA186_CLK_XUSB_FS>;
+		clock-names = "dev", "ss", "ss_src", "fs_src";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_DEVW &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA186_SID_XUSB_DEV>;
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBB>,
+				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
+	fuse@3820000 {
+		compatible = "nvidia,tegra186-efuse";
+		reg = <0x0 0x03820000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_FUSE>;
+		clock-names = "fuse";
+	};
+
+	gic: interrupt-controller@3881000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x03881000 0x0 0x1000>,
+		      <0x0 0x03882000 0x0 0x2000>,
+		      <0x0 0x03884000 0x0 0x2000>,
+		      <0x0 0x03886000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	cec@3960000 {
+		compatible = "nvidia,tegra186-cec";
+		reg = <0x0 0x03960000 0x0 0x10000>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_CEC>;
+		clock-names = "cec";
+		status = "disabled";
+	};
+
+	hsp_top0: hsp@3c00000 {
+		compatible = "nvidia,tegra186-hsp";
+		reg = <0x0 0x03c00000 0x0 0xa0000>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "doorbell";
+		#mbox-cells = <2>;
+		status = "disabled";
+	};
+
+	gen2_i2c: i2c@c240000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x0c240000 0x0 0x10000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C2>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 22>, <&gpcdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	gen8_i2c: i2c@c250000 {
+		compatible = "nvidia,tegra186-i2c";
+		reg = <0x0 0x0c250000 0x0 0x10000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&bpmp TEGRA186_CLK_I2C8>;
+		clock-names = "div-clk";
+		resets = <&bpmp TEGRA186_RESET_I2C8>;
+		reset-names = "i2c";
+		dmas = <&gpcdma 0>, <&gpcdma 0>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@c280000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x0c280000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTC>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTC>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	uartg: serial@c290000 {
+		compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x0c290000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_UARTG>;
+		clock-names = "serial";
+		resets = <&bpmp TEGRA186_RESET_UARTG>;
+		reset-names = "serial";
+		status = "disabled";
+	};
+
+	rtc: rtc@c2a0000 {
+		compatible = "nvidia,tegra186-rtc", "nvidia,tegra20-rtc";
+		reg = <0 0x0c2a0000 0 0x10000>;
+		interrupt-parent = <&pmc>;
+		interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&bpmp TEGRA186_CLK_CLK_32K>;
+		clock-names = "rtc";
+		status = "disabled";
+	};
+
+	gpio_aon: gpio@c2f0000 {
+		compatible = "nvidia,tegra186-gpio-aon";
+		reg-names = "security", "gpio";
+		reg = <0x0 0xc2f0000 0x0 0x1000>,
+		      <0x0 0xc2f1000 0x0 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm4: pwm@c340000 {
+		compatible = "nvidia,tegra186-pwm";
+		reg = <0x0 0xc340000 0x0 0x10000>;
+		clocks = <&bpmp TEGRA186_CLK_PWM4>;
+		resets = <&bpmp TEGRA186_RESET_PWM4>;
+		reset-names = "pwm";
+		status = "disabled";
+		#pwm-cells = <2>;
+	};
+
+	pmc: pmc@c360000 {
+		compatible = "nvidia,tegra186-pmc";
+		reg = <0 0x0c360000 0 0x10000>,
+		      <0 0x0c370000 0 0x10000>,
+		      <0 0x0c380000 0 0x10000>,
+		      <0 0x0c390000 0 0x10000>;
+		reg-names = "pmc", "wake", "aotag", "scratch";
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		sdmmc1_1v8: sdmmc1-1v8 {
+			pins = "sdmmc1-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		sdmmc1_3v3: sdmmc1-3v3 {
+			pins = "sdmmc1-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+
+		sdmmc2_1v8: sdmmc2-1v8 {
+			pins = "sdmmc2-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		sdmmc2_3v3: sdmmc2-3v3 {
+			pins = "sdmmc2-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+
+		sdmmc3_1v8: sdmmc3-1v8 {
+			pins = "sdmmc3-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+		};
+
+		sdmmc3_3v3: sdmmc3-3v3 {
+			pins = "sdmmc3-hv";
+			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+		};
+	};
+
+	ccplex@e000000 {
+		compatible = "nvidia,tegra186-ccplex-cluster";
+		reg = <0x0 0x0e000000 0x0 0x400000>;
+
+		nvidia,bpmp = <&bpmp>;
+	};
+
+	pcie@10003000 {
+		compatible = "nvidia,tegra186-pcie";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+		device_type = "pci";
+		reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */
+			 <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0x0        0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */
+			 <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+		clocks = <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_AFI>,
+			 <&bpmp TEGRA186_CLK_PLLE>;
+		clock-names = "pex", "afi", "pll_e";
+
+		resets = <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_AFI>,
+			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
+		reset-names = "pex", "afi", "pcie_x";
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>;
+		interconnect-names = "dma-mem", "write";
+
+		iommus = <&smmu TEGRA186_SID_AFI>;
+		iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
+		iommu-map-mask = <0x0>;
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	smmu: iommu@12000000 {
+		compatible = "nvidia,tegra186-smmu", "nvidia,smmu-500";
+		reg = <0 0x12000000 0 0x800000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		stream-match-mask = <0x7f80>;
+		#global-interrupts = <1>;
+		#iommu-cells = <1>;
+
+		nvidia,memory-controller = <&mc>;
+	};
+
+	host1x@13e00000 {
+		compatible = "nvidia,tegra186-host1x";
+		reg = <0x0 0x13e00000 0x0 0x10000>,
+		      <0x0 0x13e10000 0x0 0x10000>;
+		reg-names = "hypervisor", "vm";
+		interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&bpmp TEGRA186_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&bpmp TEGRA186_RESET_HOST1X>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
+		interconnect-names = "dma-mem";
+
+		iommus = <&smmu TEGRA186_SID_HOST1X>;
+
+		/* Context isolation domains */
+		iommu-map = <0 &smmu TEGRA186_SID_HOST1X_CTX0 1>,
+			    <1 &smmu TEGRA186_SID_HOST1X_CTX1 1>,
+			    <2 &smmu TEGRA186_SID_HOST1X_CTX2 1>,
+			    <3 &smmu TEGRA186_SID_HOST1X_CTX3 1>,
+			    <4 &smmu TEGRA186_SID_HOST1X_CTX4 1>,
+			    <5 &smmu TEGRA186_SID_HOST1X_CTX5 1>,
+			    <6 &smmu TEGRA186_SID_HOST1X_CTX6 1>,
+			    <7 &smmu TEGRA186_SID_HOST1X_CTX7 1>;
+
+		dpaux1: dpaux@15040000 {
+			compatible = "nvidia,tegra186-dpaux";
+			reg = <0x15040000 0x10000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DPAUX1>,
+				 <&bpmp TEGRA186_CLK_PLLDP>;
+			clock-names = "dpaux", "parent";
+			resets = <&bpmp TEGRA186_RESET_DPAUX1>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			state_dpaux1_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux1_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux1_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		display-hub@15200000 {
+			compatible = "nvidia,tegra186-display";
+			reg = <0x15200000 0x00040000>;
+			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+			reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+				      "wgrp3", "wgrp4", "wgrp5";
+			clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+				 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+				 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+			clock-names = "disp", "dsc", "hub";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x15200000 0x15200000 0x40000>;
+
+			display@15200000 {
+				compatible = "nvidia,tegra186-dc";
+				reg = <0x15200000 0x10000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+				clock-names = "dc";
+				resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+				reset-names = "dc";
+
+				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
+				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+				nvidia,head = <0>;
+			};
+
+			display@15210000 {
+				compatible = "nvidia,tegra186-dc";
+				reg = <0x15210000 0x10000>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+				clock-names = "dc";
+				resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+				reset-names = "dc";
+
+				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
+				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+				nvidia,head = <1>;
+			};
+
+			display@15220000 {
+				compatible = "nvidia,tegra186-dc";
+				reg = <0x15220000 0x10000>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+				clock-names = "dc";
+				resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+				reset-names = "dc";
+
+				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
+				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+				nvidia,outputs = <&sor0 &sor1>;
+				nvidia,head = <2>;
+			};
+		};
+
+		dsia: dsi@15300000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15300000 0x10000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSI>,
+				 <&bpmp TEGRA186_CLK_DSIA_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSI>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+
+		vic@15340000 {
+			compatible = "nvidia,tegra186-vic";
+			reg = <0x15340000 0x40000>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_VIC>;
+			clock-names = "vic";
+			resets = <&bpmp TEGRA186_RESET_VIC>;
+			reset-names = "vic";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_VIC>;
+		};
+
+		nvjpg@15380000 {
+			compatible = "nvidia,tegra186-nvjpg";
+			reg = <0x15380000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+			clock-names = "nvjpg";
+			resets = <&bpmp TEGRA186_RESET_NVJPG>;
+			reset-names = "nvjpg";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVJPG>;
+		};
+
+		dsib: dsi@15400000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15400000 0x10000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSIB>,
+				 <&bpmp TEGRA186_CLK_DSIB_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSIB>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+
+		nvdec@15480000 {
+			compatible = "nvidia,tegra186-nvdec";
+			reg = <0x15480000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVDEC>;
+			clock-names = "nvdec";
+			resets = <&bpmp TEGRA186_RESET_NVDEC>;
+			reset-names = "nvdec";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
+			interconnect-names = "dma-mem", "read-1", "write";
+			iommus = <&smmu TEGRA186_SID_NVDEC>;
+		};
+
+		nvenc@154c0000 {
+			compatible = "nvidia,tegra186-nvenc";
+			reg = <0x154c0000 0x40000>;
+			clocks = <&bpmp TEGRA186_CLK_NVENC>;
+			clock-names = "nvenc";
+			resets = <&bpmp TEGRA186_RESET_NVENC>;
+			reset-names = "nvenc";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA186_SID_NVENC>;
+		};
+
+		sor0: sor@15540000 {
+			compatible = "nvidia,tegra186-sor";
+			reg = <0x15540000 0x10000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_SOR0>,
+				 <&bpmp TEGRA186_CLK_SOR0_OUT>,
+				 <&bpmp TEGRA186_CLK_PLLD2>,
+				 <&bpmp TEGRA186_CLK_PLLDP>,
+				 <&bpmp TEGRA186_CLK_SOR_SAFE>,
+				 <&bpmp TEGRA186_CLK_SOR0_PAD_CLKOUT>;
+			clock-names = "sor", "out", "parent", "dp", "safe",
+				      "pad";
+			resets = <&bpmp TEGRA186_RESET_SOR0>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux_aux>;
+			pinctrl-1 = <&state_dpaux_i2c>;
+			pinctrl-2 = <&state_dpaux_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+			nvidia,interface = <0>;
+		};
+
+		sor1: sor@15580000 {
+			compatible = "nvidia,tegra186-sor";
+			reg = <0x15580000 0x10000>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_SOR1>,
+				 <&bpmp TEGRA186_CLK_SOR1_OUT>,
+				 <&bpmp TEGRA186_CLK_PLLD3>,
+				 <&bpmp TEGRA186_CLK_PLLDP>,
+				 <&bpmp TEGRA186_CLK_SOR_SAFE>,
+				 <&bpmp TEGRA186_CLK_SOR1_PAD_CLKOUT>;
+			clock-names = "sor", "out", "parent", "dp", "safe",
+				      "pad";
+			resets = <&bpmp TEGRA186_RESET_SOR1>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux1_aux>;
+			pinctrl-1 = <&state_dpaux1_i2c>;
+			pinctrl-2 = <&state_dpaux1_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+			nvidia,interface = <1>;
+		};
+
+		dpaux: dpaux@155c0000 {
+			compatible = "nvidia,tegra186-dpaux";
+			reg = <0x155c0000 0x10000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DPAUX>,
+				 <&bpmp TEGRA186_CLK_PLLDP>;
+			clock-names = "dpaux", "parent";
+			resets = <&bpmp TEGRA186_RESET_DPAUX>;
+			reset-names = "dpaux";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+			state_dpaux_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		padctl@15880000 {
+			compatible = "nvidia,tegra186-dsi-padctl";
+			reg = <0x15880000 0x10000>;
+			resets = <&bpmp TEGRA186_RESET_DSI>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+
+		dsic: dsi@15900000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15900000 0x10000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSIC>,
+				 <&bpmp TEGRA186_CLK_DSIC_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSIC>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+
+		dsid: dsi@15940000 {
+			compatible = "nvidia,tegra186-dsi";
+			reg = <0x15940000 0x10000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA186_CLK_DSID>,
+				 <&bpmp TEGRA186_CLK_DSID_LP>,
+				 <&bpmp TEGRA186_CLK_PLLD>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&bpmp TEGRA186_RESET_DSID>;
+			reset-names = "dsi";
+			status = "disabled";
+
+			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		};
+	};
+
+	gpu@17000000 {
+		compatible = "nvidia,gp10b";
+		reg = <0x0 0x17000000 0x0 0x1000000>,
+		      <0x0 0x18000000 0x0 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+
+		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+			 <&bpmp TEGRA186_CLK_GPU>;
+		clock-names = "gpu", "pwr";
+		resets = <&bpmp TEGRA186_RESET_GPU>;
+		reset-names = "gpu";
+		status = "disabled";
+
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>;
+		interconnect-names = "dma-mem", "write-0", "read-1", "write-1";
+	};
+
+	sram@30000000 {
+		compatible = "nvidia,tegra186-sysram", "mmio-sram";
+		reg = <0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x30000000 0x50000>;
+		no-memory-wc;
+
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra186-bpmp";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu TEGRA186_SID_BPMP>;
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+				    TEGRA_HSP_DB_MASTER_BPMP>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		bpmp_thermal: thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		denver_0: cpu@0 {
+			compatible = "nvidia,tegra186-denver";
+			device_type = "cpu";
+			i-cache-size = <0x20000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_DENVER>;
+			reg = <0x000>;
+		};
+
+		denver_1: cpu@1 {
+			compatible = "nvidia,tegra186-denver";
+			device_type = "cpu";
+			i-cache-size = <0x20000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <0x10000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_DENVER>;
+			reg = <0x001>;
+		};
+
+		ca57_0: cpu@2 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x100>;
+		};
+
+		ca57_1: cpu@3 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x101>;
+		};
+
+		ca57_2: cpu@4 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x102>;
+		};
+
+		ca57_3: cpu@5 {
+			compatible = "arm,cortex-a57";
+			device_type = "cpu";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_A57>;
+			reg = <0x103>;
+		};
+
+		L2_DENVER: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		L2_A57: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+	};
+
+	pmu-a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&ca57_0 &ca57_1 &ca57_2 &ca57_3>;
+	};
+
+	pmu-denver {
+		compatible = "nvidia,denver-pmu";
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&denver_0 &denver_1>;
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA186_CLK_PLLA>,
+			 <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA186_CLK_PLLA>,
+				  <&bpmp TEGRA186_CLK_PLL_A_OUT0>,
+				  <&bpmp TEGRA186_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA186_CLK_PLLA>,
+					 <&bpmp TEGRA186_CLK_PLL_A_OUT0>;
+		/*
+		 * PLLA supports dynamic ramp. Below initial rate is chosen
+		 * for this to work and oscillate between base rates required
+		 * for 8x and 11.025x sample rate streams.
+		 */
+		assigned-clock-rates = <258000000>;
+
+		iommus = <&smmu TEGRA186_SID_APE>;
+	};
+
+	thermal-zones {
+		/* Cortex-A57 cluster */
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		/* Denver cluster */
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		pll-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+
+		ao-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <1000>;
+
+			thermal-sensors = <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
+
+			trips {
+				critical {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		always-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
new file mode 100644
index 000000000..5b59c1986
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	model = "NVIDIA Jetson AGX Xavier";
+	compatible = "nvidia,p2888", "nvidia,tegra194";
+
+	aliases {
+		ethernet0 = "/bus@0/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		mmc0 = "/bus@0/mmc@3460000";
+		mmc1 = "/bus@0/mmc@3400000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii-id";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
+		serial@3110000 {
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		/* SDMMC4 (eMMC) */
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+
+			vqmmc-supply = <&vdd_1v8ls>;
+			vmmc-supply = <&vdd_emmc_3v3>;
+		};
+
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v_sata>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-2 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max20024";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max20024_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max20024_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+					in-sd4-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_5v0_sys>;
+					in-ldo7-8-supply = <&vdd_1v8ls>;
+
+					vdd_1v0: sd0 {
+						regulator-name = "VDDIO_SYS_1V0";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8hs: sd1 {
+						regulator-name = "VDDIO_SYS_1V8HS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ls: sd2 {
+						regulator-name = "VDDIO_SYS_1V8LS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ao: sd3 {
+						regulator-name = "VDDIO_AO_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					sd4 {
+						regulator-name = "VDD_DDR_1V1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo0 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <800000>;
+						regulator-max-microvolt = <800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_AO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_emmc_3v3: ldo3 {
+						regulator-name = "VDD_EMMC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_usb_3v3: ldo5 {
+						regulator-name = "VDD_USB_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo6 {
+						regulator-name = "VDD_SDIO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo7 {
+						regulator-name = "AVDD_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+				};
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp451";
+				reg = <0x4c>;
+
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA194_MAIN_GPIO(H, 2)
+					      IRQ_TYPE_EDGE_FALLING>;
+				vcc-supply = <&vdd_1v8ls>;
+
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "PEX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vdd_12v_pcie: regulator-vdd-12v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
+
+	vdd_5v_sata: regulator-vdd-5v0-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
new file mode 100644
index 000000000..64a3398fe
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -0,0 +1,2448 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra194-p2888.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Xavier Developer Kit";
+	compatible = "nvidia,p2972-0000", "nvidia,tegra194";
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s1_ep>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap_ep: endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5658_ep>;
+							};
+						};
+					};
+				};
+
+				i2s@2901100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s2_ep>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s4_ep>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s6_ep>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_in_ep>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_in_ep>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_in_ep>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_in_ep>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in4_ep>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in2_ep>;
+							};
+						};
+
+						amx2_in3_port: port@2 {
+							reg = <2>;
+
+							amx2_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in3_ep>;
+							};
+						};
+
+						amx2_in4_port: port@3 {
+							reg = <3>;
+
+							amx2_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in4_ep>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in4_ep>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in4_ep>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_out_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_in_ep>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out1_ep>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out2_ep>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out3_ep>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_in_ep>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out1_ep>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out2_ep>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out3_ep>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_in_ep>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out1_ep>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out2_ep>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out3_ep>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_in_ep>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out1_ep>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out2_ep>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out3_ep>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out4_ep>;
+							};
+						};
+					};
+				};
+
+				dmic@2904200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic3_ep>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_in_ep>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_in_ep>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mixer_in1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mixer_in2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mixer_in3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mixer_in4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mixer_in5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mixer_in6_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mixer_in7_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in7_ep>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mixer_in8_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in8_ep>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mixer_in9_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in9_ep>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mixer_in10_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in10_ep>;
+							};
+						};
+
+						mixer_out1_port: port@a {
+							reg = <0xa>;
+
+							mixer_out1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out1_ep>;
+							};
+						};
+
+						mixer_out2_port: port@b {
+							reg = <0xb>;
+
+							mixer_out2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out2_ep>;
+							};
+						};
+
+						mixer_out3_port: port@c {
+							reg = <0xc>;
+
+							mixer_out3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out3_ep>;
+							};
+						};
+
+						mixer_out4_port: port@d {
+							reg = <0xd>;
+
+							mixer_out4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out4_ep>;
+							};
+						};
+
+						mixer_out5_port: port@e {
+							reg = <0xe>;
+
+							mixer_out5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out5_ep>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0_ep: endpoint {
+								remote-endpoint = <&xbar_admaif0_ep>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1_ep: endpoint {
+								remote-endpoint = <&xbar_admaif1_ep>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2_ep: endpoint {
+								remote-endpoint = <&xbar_admaif2_ep>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3_ep: endpoint {
+								remote-endpoint = <&xbar_admaif3_ep>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4_ep: endpoint {
+								remote-endpoint = <&xbar_admaif4_ep>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5_ep: endpoint {
+								remote-endpoint = <&xbar_admaif5_ep>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6_ep: endpoint {
+								remote-endpoint = <&xbar_admaif6_ep>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7_ep: endpoint {
+								remote-endpoint = <&xbar_admaif7_ep>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8_ep: endpoint {
+								remote-endpoint = <&xbar_admaif8_ep>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9_ep: endpoint {
+								remote-endpoint = <&xbar_admaif9_ep>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10_ep: endpoint {
+								remote-endpoint = <&xbar_admaif10_ep>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11_ep: endpoint {
+								remote-endpoint = <&xbar_admaif11_ep>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12_ep: endpoint {
+								remote-endpoint = <&xbar_admaif12_ep>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13_ep: endpoint {
+								remote-endpoint = <&xbar_admaif13_ep>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14_ep: endpoint {
+								remote-endpoint = <&xbar_admaif14_ep>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15_ep: endpoint {
+								remote-endpoint = <&xbar_admaif15_ep>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16_ep: endpoint {
+								remote-endpoint = <&xbar_admaif16_ep>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17_ep: endpoint {
+								remote-endpoint = <&xbar_admaif17_ep>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18_ep: endpoint {
+								remote-endpoint = <&xbar_admaif18_ep>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19_ep: endpoint {
+								remote-endpoint = <&xbar_admaif19_ep>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port: port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0_ep: endpoint {
+							remote-endpoint = <&admaif0_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1_ep: endpoint {
+							remote-endpoint = <&admaif1_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2_ep: endpoint {
+							remote-endpoint = <&admaif2_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3_ep: endpoint {
+							remote-endpoint = <&admaif3_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4_ep: endpoint {
+							remote-endpoint = <&admaif4_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5_ep: endpoint {
+							remote-endpoint = <&admaif5_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6_ep: endpoint {
+							remote-endpoint = <&admaif6_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7_ep: endpoint {
+							remote-endpoint = <&admaif7_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8_ep: endpoint {
+							remote-endpoint = <&admaif8_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9_ep: endpoint {
+							remote-endpoint = <&admaif9_ep>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10_ep: endpoint {
+							remote-endpoint = <&admaif10_ep>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11_ep: endpoint {
+							remote-endpoint = <&admaif11_ep>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12_ep: endpoint {
+							remote-endpoint = <&admaif12_ep>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13_ep: endpoint {
+							remote-endpoint = <&admaif13_ep>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14_ep: endpoint {
+							remote-endpoint = <&admaif14_ep>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15_ep: endpoint {
+							remote-endpoint = <&admaif15_ep>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16_ep: endpoint {
+							remote-endpoint = <&admaif16_ep>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17_ep: endpoint {
+							remote-endpoint = <&admaif17_ep>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18_ep: endpoint {
+							remote-endpoint = <&admaif18_ep>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19_ep: endpoint {
+							remote-endpoint = <&admaif19_ep>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1_ep: endpoint {
+							remote-endpoint = <&i2s1_cif_ep>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2_ep: endpoint {
+							remote-endpoint = <&i2s2_cif_ep>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4_ep: endpoint {
+							remote-endpoint = <&i2s4_cif_ep>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6_ep: endpoint {
+							remote-endpoint = <&i2s6_cif_ep>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3_ep: endpoint {
+							remote-endpoint = <&dmic3_cif_ep>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_in_ep>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_in_ep>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_in_ep>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_in_ep>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_in_ep>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_in_ep>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_out_ep>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1_ep: endpoint {
+							remote-endpoint = <&amx1_in1_ep>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2_ep: endpoint {
+							remote-endpoint = <&amx1_in2_ep>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3_ep: endpoint {
+							remote-endpoint = <&amx1_in3_ep>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4_ep: endpoint {
+							remote-endpoint = <&amx1_in4_ep>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out_ep: endpoint {
+							remote-endpoint = <&amx1_out_ep>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1_ep: endpoint {
+							remote-endpoint = <&amx2_in1_ep>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2_ep: endpoint {
+							remote-endpoint = <&amx2_in2_ep>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3_ep: endpoint {
+							remote-endpoint = <&amx2_in3_ep>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4_ep: endpoint {
+							remote-endpoint = <&amx2_in4_ep>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out_ep: endpoint {
+							remote-endpoint = <&amx2_out_ep>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1_ep: endpoint {
+							remote-endpoint = <&amx3_in1_ep>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2_ep: endpoint {
+							remote-endpoint = <&amx3_in2_ep>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3_ep: endpoint {
+							remote-endpoint = <&amx3_in3_ep>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4_ep: endpoint {
+							remote-endpoint = <&amx3_in4_ep>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out_ep: endpoint {
+							remote-endpoint = <&amx3_out_ep>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1_ep: endpoint {
+							remote-endpoint = <&amx4_in1_ep>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2_ep: endpoint {
+							remote-endpoint = <&amx4_in2_ep>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3_ep: endpoint {
+							remote-endpoint = <&amx4_in3_ep>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4_ep: endpoint {
+							remote-endpoint = <&amx4_in4_ep>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out_ep: endpoint {
+							remote-endpoint = <&amx4_out_ep>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in_ep: endpoint {
+							remote-endpoint = <&adx1_in_ep>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1_ep: endpoint {
+							remote-endpoint = <&adx1_out1_ep>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2_ep: endpoint {
+							remote-endpoint = <&adx1_out2_ep>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3_ep: endpoint {
+							remote-endpoint = <&adx1_out3_ep>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4_ep: endpoint {
+							remote-endpoint = <&adx1_out4_ep>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in_ep: endpoint {
+							remote-endpoint = <&adx2_in_ep>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1_ep: endpoint {
+							remote-endpoint = <&adx2_out1_ep>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2_ep: endpoint {
+							remote-endpoint = <&adx2_out2_ep>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3_ep: endpoint {
+							remote-endpoint = <&adx2_out3_ep>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4_ep: endpoint {
+							remote-endpoint = <&adx2_out4_ep>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in_ep: endpoint {
+							remote-endpoint = <&adx3_in_ep>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1_ep: endpoint {
+							remote-endpoint = <&adx3_out1_ep>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2_ep: endpoint {
+							remote-endpoint = <&adx3_out2_ep>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3_ep: endpoint {
+							remote-endpoint = <&adx3_out3_ep>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4_ep: endpoint {
+							remote-endpoint = <&adx3_out4_ep>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in_ep: endpoint {
+							remote-endpoint = <&adx4_in_ep>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1_ep: endpoint {
+							remote-endpoint = <&adx4_out1_ep>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2_ep: endpoint {
+							remote-endpoint = <&adx4_out2_ep>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3_ep: endpoint {
+							remote-endpoint = <&adx4_out3_ep>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4_ep: endpoint {
+							remote-endpoint = <&adx4_out4_ep>;
+						};
+					};
+
+					xbar_mixer_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mixer_in1_ep: endpoint {
+							remote-endpoint = <&mixer_in1_ep>;
+						};
+					};
+
+					xbar_mixer_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mixer_in2_ep: endpoint {
+							remote-endpoint = <&mixer_in2_ep>;
+						};
+					};
+
+					xbar_mixer_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mixer_in3_ep: endpoint {
+							remote-endpoint = <&mixer_in3_ep>;
+						};
+					};
+
+					xbar_mixer_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mixer_in4_ep: endpoint {
+							remote-endpoint = <&mixer_in4_ep>;
+						};
+					};
+
+					xbar_mixer_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mixer_in5_ep: endpoint {
+							remote-endpoint = <&mixer_in5_ep>;
+						};
+					};
+
+					xbar_mixer_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mixer_in6_ep: endpoint {
+							remote-endpoint = <&mixer_in6_ep>;
+						};
+					};
+
+					xbar_mixer_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mixer_in7_ep: endpoint {
+							remote-endpoint = <&mixer_in7_ep>;
+						};
+					};
+
+					xbar_mixer_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mixer_in8_ep: endpoint {
+							remote-endpoint = <&mixer_in8_ep>;
+						};
+					};
+
+					xbar_mixer_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mixer_in9_ep: endpoint {
+							remote-endpoint = <&mixer_in9_ep>;
+						};
+					};
+
+					xbar_mixer_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mixer_in10_ep: endpoint {
+							remote-endpoint = <&mixer_in10_ep>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mixer_out1_ep: endpoint {
+							remote-endpoint = <&mixer_out1_ep>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mixer_out2_ep: endpoint {
+							remote-endpoint = <&mixer_out2_ep>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mixer_out3_ep: endpoint {
+							remote-endpoint = <&mixer_out3_ep>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mixer_out4_ep: endpoint {
+							remote-endpoint = <&mixer_out4_ep>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mixer_out5_ep: endpoint {
+							remote-endpoint = <&mixer_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		i2c@3160000 {
+			eeprom@56 {
+				compatible = "atmel,24c02";
+				reg = <0x56>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		ddc: i2c@31c0000 {
+			status = "okay";
+		};
+
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson AGX Xavier HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-2 {
+							status = "okay";
+						};
+
+						usb3-3 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+
+				usb3-3 {
+					nvidia,usb2-companion = <3>;
+					maximum-speed = "super-speed";
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3";
+		};
+
+		i2c@c250000 {
+			status = "okay";
+
+			rt5658: audio-codec@1a {
+				status = "okay";
+
+				compatible = "realtek,rt5658";
+				reg = <0x1a>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA194_MAIN_GPIO(S, 5) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+				realtek,jd-src = <2>;
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5658_ep: endpoint {
+						remote-endpoint = <&i2s1_dap_ep>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+		};
+
+		pwm@c340000 {
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			display-hub@15200000 {
+				status = "okay";
+			};
+
+			dpaux@155c0000 {
+				status = "okay";
+			};
+
+			dpaux@155d0000 {
+				status = "okay";
+			};
+
+			dpaux@155e0000 {
+				status = "okay";
+			};
+
+			/* DP0 */
+			sor@15b00000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux0>;
+			};
+
+			/* DP1 */
+			sor@15b40000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux1>;
+			};
+
+			/* HDMI */
+			sor@15b80000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+				hdmi-supply = <&vdd_hdmi>;
+
+				nvidia,ddc-i2c-bus = <&ddc>;
+				nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 2)
+							 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_0>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14140000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_7>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14180000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+			       <&p2u_hsio_5>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+				       GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm4 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>,
+		       <&mixer_out4_port>, <&mixer_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA Jetson AGX Xavier APE";
+
+		widgets =
+			"Microphone",	"CVB-RT MIC Jack",
+			"Microphone",	"CVB-RT MIC",
+			"Headphone",	"CVB-RT HP Jack",
+			"Speaker",	"CVB-RT SPK";
+
+		routing =
+			/* I2S1 <-> RT5658 */
+			"CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
+			"I2S1 DAP-Capture",	"CVB-RT AIF1 Capture",
+			/* RT5658 Codec controls */
+			"CVB-RT HP Jack",	"CVB-RT HPO L Playback",
+			"CVB-RT HP Jack",	"CVB-RT HPO R Playback",
+			"CVB-RT IN1P",		"CVB-RT MIC Jack",
+			"CVB-RT IN2P",		"CVB-RT MIC Jack",
+			"CVB-RT SPK",		"CVB-RT SPO Playback",
+			"CVB-RT DMIC L1",	"CVB-RT MIC",
+			"CVB-RT DMIC L2",	"CVB-RT MIC",
+			"CVB-RT DMIC R1",	"CVB-RT MIC",
+			"CVB-RT DMIC R2",	"CVB-RT MIC";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
new file mode 100644
index 000000000..1c3874b67
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0000.dtsi"
+#include "tegra194-p3509-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX Developer Kit (SD-card)";
+	compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
new file mode 100644
index 000000000..238fd98e8
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p3668-0001.dtsi"
+#include "tegra194-p3509-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX Developer Kit (eMMC)";
+	compatible = "nvidia,p3509-0000+p3668-0001", "nvidia,tegra194";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
new file mode 100644
index 000000000..4a17ea5e4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -0,0 +1,2480 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s3_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s3_ep>;
+							};
+						};
+
+						i2s3_port: port@1 {
+							reg = <1>;
+
+							i2s3_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s5_cif_ep: endpoint {
+								remote-endpoint = <&xbar_i2s5_ep>;
+							};
+						};
+
+						i2s5_port: port@1 {
+							reg = <1>;
+
+							i2s5_dap_ep: endpoint {
+								dai-format = "i2s";
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_in_ep>;
+								convert-rate = <44100>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc1_out_ep>;
+								convert-rate = <48000>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_in_ep>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_in_ep>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc3_out_ep>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_in_ep>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_sfc4_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_in4_ep>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx1_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in2_ep>;
+							};
+						};
+
+						amx2_in3_port: port@2 {
+							reg = <2>;
+
+							amx2_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in3_ep>;
+							};
+						};
+
+						amx2_in4_port: port@3 {
+							reg = <3>;
+
+							amx2_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_in4_ep>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_in4_ep>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx3_out_ep>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_in4_ep>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out_ep: endpoint {
+								remote-endpoint = <&xbar_amx4_out_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_in_ep>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out1_ep>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out2_ep>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out3_ep>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx1_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_in_ep>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out1_ep>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out2_ep>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out3_ep>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx2_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_in_ep>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out1_ep>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out2_ep>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out3_ep>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx3_out4_ep>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_in_ep>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out1_ep>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out2_ep>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out3_ep>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4_ep: endpoint {
+								remote-endpoint = <&xbar_adx4_out4_ep>;
+							};
+						};
+					};
+				};
+
+				dmic@2904000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic1_ep>;
+							};
+						};
+
+						dmic1_port: port@1 {
+							reg = <1>;
+
+							dmic1_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dmic@2904100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic2_ep>;
+							};
+						};
+
+						dmic2_port: port@1 {
+							reg = <1>;
+
+							dmic2_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dmic@2904300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic4_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dmic4_ep>;
+							};
+						};
+
+						dmic4_port: port@1 {
+							reg = <1>;
+
+							dmic4_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dspk@2905000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk1_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dspk1_ep>;
+							};
+						};
+
+						dspk1_port: port@1 {
+							reg = <1>;
+
+							dspk1_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				dspk@2905100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dspk2_cif_ep: endpoint {
+								remote-endpoint = <&xbar_dspk2_ep>;
+							};
+						};
+
+						dspk2_port: port@1 {
+							reg = <1>;
+
+							dspk2_dap_ep: endpoint {
+								/* Place holder for external Codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_in_ep>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_in_ep>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_mvc2_out_ep>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mixer_in1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mixer_in2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mixer_in3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mixer_in4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mixer_in5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mixer_in6_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mixer_in7_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in7_ep>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mixer_in8_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in8_ep>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mixer_in9_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in9_ep>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mixer_in10_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_in10_ep>;
+							};
+						};
+
+						mixer_out1_port: port@a {
+							reg = <0xa>;
+
+							mixer_out1_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out1_ep>;
+							};
+						};
+
+						mixer_out2_port: port@b {
+							reg = <0xb>;
+
+							mixer_out2_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out2_ep>;
+							};
+						};
+
+						mixer_out3_port: port@c {
+							reg = <0xc>;
+
+							mixer_out3_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out3_ep>;
+							};
+						};
+
+						mixer_out4_port: port@d {
+							reg = <0xd>;
+
+							mixer_out4_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out4_ep>;
+							};
+						};
+
+						mixer_out5_port: port@e {
+							reg = <0xe>;
+
+							mixer_out5_ep: endpoint {
+								remote-endpoint = <&xbar_mixer_out5_ep>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0_ep: endpoint {
+								remote-endpoint = <&xbar_admaif0_ep>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1_ep: endpoint {
+								remote-endpoint = <&xbar_admaif1_ep>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2_ep: endpoint {
+								remote-endpoint = <&xbar_admaif2_ep>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3_ep: endpoint {
+								remote-endpoint = <&xbar_admaif3_ep>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4_ep: endpoint {
+								remote-endpoint = <&xbar_admaif4_ep>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5_ep: endpoint {
+								remote-endpoint = <&xbar_admaif5_ep>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6_ep: endpoint {
+								remote-endpoint = <&xbar_admaif6_ep>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7_ep: endpoint {
+								remote-endpoint = <&xbar_admaif7_ep>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8_ep: endpoint {
+								remote-endpoint = <&xbar_admaif8_ep>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9_ep: endpoint {
+								remote-endpoint = <&xbar_admaif9_ep>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10_ep: endpoint {
+								remote-endpoint = <&xbar_admaif10_ep>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11_ep: endpoint {
+								remote-endpoint = <&xbar_admaif11_ep>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12_ep: endpoint {
+								remote-endpoint = <&xbar_admaif12_ep>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13_ep: endpoint {
+								remote-endpoint = <&xbar_admaif13_ep>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14_ep: endpoint {
+								remote-endpoint = <&xbar_admaif14_ep>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15_ep: endpoint {
+								remote-endpoint = <&xbar_admaif15_ep>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16_ep: endpoint {
+								remote-endpoint = <&xbar_admaif16_ep>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17_ep: endpoint {
+								remote-endpoint = <&xbar_admaif17_ep>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18_ep: endpoint {
+								remote-endpoint = <&xbar_admaif18_ep>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19_ep: endpoint {
+								remote-endpoint = <&xbar_admaif19_ep>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0_ep: endpoint {
+							remote-endpoint = <&admaif0_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1_ep: endpoint {
+							remote-endpoint = <&admaif1_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2_ep: endpoint {
+							remote-endpoint = <&admaif2_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3_ep: endpoint {
+							remote-endpoint = <&admaif3_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4_ep: endpoint {
+							remote-endpoint = <&admaif4_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5_ep: endpoint {
+							remote-endpoint = <&admaif5_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6_ep: endpoint {
+							remote-endpoint = <&admaif6_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7_ep: endpoint {
+							remote-endpoint = <&admaif7_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8_ep: endpoint {
+							remote-endpoint = <&admaif8_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9_ep: endpoint {
+							remote-endpoint = <&admaif9_ep>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10_ep: endpoint {
+							remote-endpoint = <&admaif10_ep>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11_ep: endpoint {
+							remote-endpoint = <&admaif11_ep>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12_ep: endpoint {
+							remote-endpoint = <&admaif12_ep>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13_ep: endpoint {
+							remote-endpoint = <&admaif13_ep>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14_ep: endpoint {
+							remote-endpoint = <&admaif14_ep>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15_ep: endpoint {
+							remote-endpoint = <&admaif15_ep>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16_ep: endpoint {
+							remote-endpoint = <&admaif16_ep>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17_ep: endpoint {
+							remote-endpoint = <&admaif17_ep>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18_ep: endpoint {
+							remote-endpoint = <&admaif18_ep>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19_ep: endpoint {
+							remote-endpoint = <&admaif19_ep>;
+						};
+					};
+
+					xbar_i2s3_port: port@16 {
+						reg = <0x16>;
+
+						xbar_i2s3_ep: endpoint {
+							remote-endpoint = <&i2s3_cif_ep>;
+						};
+					};
+
+					xbar_i2s5_port: port@18 {
+						reg = <0x18>;
+
+						xbar_i2s5_ep: endpoint {
+							remote-endpoint = <&i2s5_cif_ep>;
+						};
+					};
+
+					xbar_dmic1_port: port@1a {
+						reg = <0x1a>;
+
+						xbar_dmic1_ep: endpoint {
+							remote-endpoint = <&dmic1_cif_ep>;
+						};
+					};
+
+					xbar_dmic2_port: port@1b {
+						reg = <0x1b>;
+
+						xbar_dmic2_ep: endpoint {
+							remote-endpoint = <&dmic2_cif_ep>;
+						};
+					};
+
+					xbar_dmic4_port: port@1d {
+						reg = <0x1d>;
+
+						xbar_dmic4_ep: endpoint {
+							remote-endpoint = <&dmic4_cif_ep>;
+						};
+					};
+
+					xbar_dspk1_port: port@1e {
+						reg = <0x1e>;
+
+						xbar_dspk1_ep: endpoint {
+							remote-endpoint = <&dspk1_cif_ep>;
+						};
+					};
+
+					xbar_dspk2_port: port@1f {
+						reg = <0x1f>;
+
+						xbar_dspk2_ep: endpoint {
+							remote-endpoint = <&dspk2_cif_ep>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_in_ep>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out_ep: endpoint {
+							remote-endpoint = <&sfc1_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_in_ep>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out_ep: endpoint {
+							remote-endpoint = <&sfc2_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_in_ep>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out_ep: endpoint {
+							remote-endpoint = <&sfc3_cif_out_ep>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_in_ep>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out_ep: endpoint {
+							remote-endpoint = <&sfc4_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_in_ep>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out_ep: endpoint {
+							remote-endpoint = <&mvc1_cif_out_ep>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_in_ep>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out_ep: endpoint {
+							remote-endpoint = <&mvc2_cif_out_ep>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1_ep: endpoint {
+							remote-endpoint = <&amx1_in1_ep>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2_ep: endpoint {
+							remote-endpoint = <&amx1_in2_ep>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3_ep: endpoint {
+							remote-endpoint = <&amx1_in3_ep>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4_ep: endpoint {
+							remote-endpoint = <&amx1_in4_ep>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out_ep: endpoint {
+							remote-endpoint = <&amx1_out_ep>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1_ep: endpoint {
+							remote-endpoint = <&amx2_in1_ep>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2_ep: endpoint {
+							remote-endpoint = <&amx2_in2_ep>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3_ep: endpoint {
+							remote-endpoint = <&amx2_in3_ep>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4_ep: endpoint {
+							remote-endpoint = <&amx2_in4_ep>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out_ep: endpoint {
+							remote-endpoint = <&amx2_out_ep>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1_ep: endpoint {
+							remote-endpoint = <&amx3_in1_ep>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2_ep: endpoint {
+							remote-endpoint = <&amx3_in2_ep>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3_ep: endpoint {
+							remote-endpoint = <&amx3_in3_ep>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4_ep: endpoint {
+							remote-endpoint = <&amx3_in4_ep>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out_ep: endpoint {
+							remote-endpoint = <&amx3_out_ep>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1_ep: endpoint {
+							remote-endpoint = <&amx4_in1_ep>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2_ep: endpoint {
+							remote-endpoint = <&amx4_in2_ep>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3_ep: endpoint {
+							remote-endpoint = <&amx4_in3_ep>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4_ep: endpoint {
+							remote-endpoint = <&amx4_in4_ep>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out_ep: endpoint {
+							remote-endpoint = <&amx4_out_ep>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in_ep: endpoint {
+							remote-endpoint = <&adx1_in_ep>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1_ep: endpoint {
+							remote-endpoint = <&adx1_out1_ep>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2_ep: endpoint {
+							remote-endpoint = <&adx1_out2_ep>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3_ep: endpoint {
+							remote-endpoint = <&adx1_out3_ep>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4_ep: endpoint {
+							remote-endpoint = <&adx1_out4_ep>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in_ep: endpoint {
+							remote-endpoint = <&adx2_in_ep>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1_ep: endpoint {
+							remote-endpoint = <&adx2_out1_ep>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2_ep: endpoint {
+							remote-endpoint = <&adx2_out2_ep>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3_ep: endpoint {
+							remote-endpoint = <&adx2_out3_ep>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4_ep: endpoint {
+							remote-endpoint = <&adx2_out4_ep>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in_ep: endpoint {
+							remote-endpoint = <&adx3_in_ep>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1_ep: endpoint {
+							remote-endpoint = <&adx3_out1_ep>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2_ep: endpoint {
+							remote-endpoint = <&adx3_out2_ep>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3_ep: endpoint {
+							remote-endpoint = <&adx3_out3_ep>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4_ep: endpoint {
+							remote-endpoint = <&adx3_out4_ep>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in_ep: endpoint {
+							remote-endpoint = <&adx4_in_ep>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1_ep: endpoint {
+							remote-endpoint = <&adx4_out1_ep>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2_ep: endpoint {
+							remote-endpoint = <&adx4_out2_ep>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3_ep: endpoint {
+							remote-endpoint = <&adx4_out3_ep>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4_ep: endpoint {
+							remote-endpoint = <&adx4_out4_ep>;
+						};
+					};
+
+					xbar_mixer_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mixer_in1_ep: endpoint {
+							remote-endpoint = <&mixer_in1_ep>;
+						};
+					};
+
+					xbar_mixer_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mixer_in2_ep: endpoint {
+							remote-endpoint = <&mixer_in2_ep>;
+						};
+					};
+
+					xbar_mixer_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mixer_in3_ep: endpoint {
+							remote-endpoint = <&mixer_in3_ep>;
+						};
+					};
+
+					xbar_mixer_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mixer_in4_ep: endpoint {
+							remote-endpoint = <&mixer_in4_ep>;
+						};
+					};
+
+					xbar_mixer_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mixer_in5_ep: endpoint {
+							remote-endpoint = <&mixer_in5_ep>;
+						};
+					};
+
+					xbar_mixer_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mixer_in6_ep: endpoint {
+							remote-endpoint = <&mixer_in6_ep>;
+						};
+					};
+
+					xbar_mixer_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mixer_in7_ep: endpoint {
+							remote-endpoint = <&mixer_in7_ep>;
+						};
+					};
+
+					xbar_mixer_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mixer_in8_ep: endpoint {
+							remote-endpoint = <&mixer_in8_ep>;
+						};
+					};
+
+					xbar_mixer_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mixer_in9_ep: endpoint {
+							remote-endpoint = <&mixer_in9_ep>;
+						};
+					};
+
+					xbar_mixer_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mixer_in10_ep: endpoint {
+							remote-endpoint = <&mixer_in10_ep>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mixer_out1_ep: endpoint {
+							remote-endpoint = <&mixer_out1_ep>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mixer_out2_ep: endpoint {
+							remote-endpoint = <&mixer_out2_ep>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mixer_out3_ep: endpoint {
+							remote-endpoint = <&mixer_out3_ep>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mixer_out4_ep: endpoint {
+							remote-endpoint = <&mixer_out4_ep>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mixer_out5_ep: endpoint {
+							remote-endpoint = <&mixer_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		i2c@3160000 {
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		ddc: i2c@3190000 {
+			status = "okay";
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		pwm@32d0000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Xavier NX HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					status = "okay";
+					usb-role-switch;
+					connector {
+						compatible = "gpio-usb-b-connector",
+							"usb-b-connector";
+						label = "micro-USB";
+						type = "micro";
+						vbus-gpios = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
+								    GPIO_ACTIVE_LOW>;
+					};
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>;
+			phy-names = "usb2-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-1", "usb2-2", "usb3-2";
+		};
+
+		host1x@13e00000 {
+			display-hub@15200000 {
+				status = "okay";
+			};
+
+			dpaux@155c0000 {
+				status = "okay";
+			};
+
+			dpaux@155d0000 {
+				status = "okay";
+			};
+
+			/* DP0 */
+			sor@15b00000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux0>;
+			};
+
+			/* HDMI */
+			sor@15b40000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+				hdmi-supply = <&vdd_hdmi>;
+
+				nvidia,ddc-i2c-bus = <&ddc>;
+				nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
+							 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_hsio_11>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+			reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+				       GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm6 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s3_port>, <&xbar_i2s5_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>, <&xbar_dmic4_port>,
+		       <&xbar_dspk1_port>, <&xbar_dspk2_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s3_port>, <&i2s5_port>,
+		       <&dmic1_port>, <&dmic2_port>, <&dmic4_port>,
+		       <&dspk1_port>, <&dspk2_port>;
+
+		label = "NVIDIA Jetson Xavier NX APE";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aux-thermal {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
new file mode 100644
index 000000000..8c2c709dd
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194-p3668.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX (SD-card)";
+	compatible = "nvidia,p3668-0000", "nvidia,tegra194";
+
+	aliases {
+		mmc0 = "/bus@0/mmc@3400000";
+	};
+
+	bus@0 {
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+			vmmc-supply = <&vdd_3v3_sd>;
+		};
+	};
+
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi
new file mode 100644
index 000000000..f5a9ebbfb
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0001.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194-p3668.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX (eMMC)";
+	compatible = "nvidia,p3668-0001", "nvidia,tegra194";
+
+	aliases {
+		mmc0 = "/bus@0/mmc@3460000";
+	};
+
+	bus@0 {
+		/* SDMMC4 (eMMC) */
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+
+			vqmmc-supply = <&vdd_1v8ls>;
+			vmmc-supply = <&vdd_emmc_3v3>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
new file mode 100644
index 000000000..58f190b0f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	aliases {
+		ethernet0 = "/bus@0/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		rtc0 = "/bpmp/i2c/pmic@3c";
+		rtc1 = "/bus@0/rtc@c2a0000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii-id";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
+		serial@3100000 {
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max20024";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max20024_default>;
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				max20024_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+					in-sd4-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_5v0_sys>;
+					in-ldo7-8-supply = <&vdd_1v8ls>;
+
+					vdd_1v0: sd0 {
+						regulator-name = "VDDIO_SYS_1V0";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8hs: sd1 {
+						regulator-name = "VDDIO_SYS_1V8HS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ls: sd2 {
+						regulator-name = "VDDIO_SYS_1V8LS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ao: sd3 {
+						regulator-name = "VDDIO_AO_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					sd4 {
+						regulator-name = "VDD_DDR_1V1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo0 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <800000>;
+						regulator-max-microvolt = <800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_AO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_emmc_3v3: ldo3 {
+						regulator-name = "VDD_EMMC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_usb_3v3: ldo5 {
+						regulator-name = "VDD_USB_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "VDD_SDIO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo7 {
+						regulator-name = "AVDD_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
new file mode 100644
index 000000000..33f92b77c
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -0,0 +1,3180 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra194-clock.h>
+#include <dt-bindings/gpio/tegra194-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/power/tegra194-powergate.h>
+#include <dt-bindings/reset/tegra194-reset.h>
+#include <dt-bindings/thermal/tegra194-bpmp-thermal.h>
+#include <dt-bindings/memory/tegra194-mc.h>
+
+/ {
+	compatible = "nvidia,tegra194";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* control backbone */
+	bus@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		apbmisc: misc@100000 {
+			compatible = "nvidia,tegra194-misc";
+			reg = <0x0 0x00100000 0x0 0xf000>,
+			      <0x0 0x0010f000 0x0 0x1000>;
+		};
+
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra194-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x0 0x2200000 0x0 0x10000>,
+			      <0x0 0x2210000 0x0 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 169>;
+		};
+
+		cbb-noc@2300000 {
+			compatible = "nvidia,tegra194-cbb-noc";
+			reg = <0x0 0x02300000 0x0 0x1000>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		axi2apb: axi2apb@2390000 {
+			compatible = "nvidia,tegra194-axi2apb";
+			reg = <0x0 0x2390000 0x0 0x1000>,
+			      <0x0 0x23a0000 0x0 0x1000>,
+			      <0x0 0x23b0000 0x0 0x1000>,
+			      <0x0 0x23c0000 0x0 0x1000>,
+			      <0x0 0x23d0000 0x0 0x1000>,
+			      <0x0 0x23e0000 0x0 0x1000>;
+			status = "okay";
+		};
+
+		pinmux: pinmux@2430000 {
+			compatible = "nvidia,tegra194-pinmux";
+			reg = <0x0 0x2430000 0x0 0x17000>;
+			status = "okay";
+
+			pex_clkreq_c5_bi_dir_state: pinmux-pex-clkreq-c5-bi-dir {
+				clkreq {
+					nvidia,pins = "pex_l5_clkreq_n_pgg0";
+					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				};
+			};
+
+			pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+				pex_rst {
+					nvidia,pins = "pex_l5_rst_n_pgg1";
+					nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+					nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+					nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+					nvidia,tristate = <TEGRA_PIN_DISABLE>;
+					nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				};
+			};
+		};
+
+		ethernet@2490000 {
+			compatible = "nvidia,tegra194-eqos",
+				     "nvidia,tegra186-eqos",
+				     "snps,dwc-qos-ethernet-4.10";
+			reg = <0x0 0x02490000 0x0 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_AXI_CBB>,
+				 <&bpmp TEGRA194_CLK_EQOS_AXI>,
+				 <&bpmp TEGRA194_CLK_EQOS_RX>,
+				 <&bpmp TEGRA194_CLK_EQOS_TX>,
+				 <&bpmp TEGRA194_CLK_EQOS_PTP_REF>;
+			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+			resets = <&bpmp TEGRA194_RESET_EQOS>;
+			reset-names = "eqos";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_EQOS>;
+			status = "disabled";
+
+			snps,write-requests = <1>;
+			snps,read-requests = <3>;
+			snps,burst-map = <0x7>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <8>;
+		};
+
+		gpcdma: dma-controller@2600000 {
+			compatible = "nvidia,tegra194-gpcdma",
+				     "nvidia,tegra186-gpcdma";
+			reg = <0x0 0x2600000 0x0 0x210000>;
+			resets = <&bpmp TEGRA194_RESET_GPCDMA>;
+			reset-names = "gpcdma";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu TEGRA194_SID_GPCDMA_0>;
+			dma-coherent;
+			dma-channel-mask = <0xfffffffe>;
+			status = "okay";
+		};
+
+		aconnect@2900000 {
+			compatible = "nvidia,tegra194-aconnect",
+				     "nvidia,tegra210-aconnect";
+			clocks = <&bpmp TEGRA194_CLK_APE>,
+				 <&bpmp TEGRA194_CLK_APB2APE>;
+			clock-names = "ape", "apb2ape";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
+
+			tegra_ahub: ahub@2900800 {
+				compatible = "nvidia,tegra194-ahub",
+					     "nvidia,tegra186-ahub";
+				reg = <0x0 0x02900800 0x0 0x800>;
+				clocks = <&bpmp TEGRA194_CLK_AHUB>;
+				clock-names = "ahub";
+				assigned-clocks = <&bpmp TEGRA194_CLK_AHUB>;
+				assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLP_OUT0>;
+				assigned-clock-rates = <81600000>;
+				status = "disabled";
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
+
+				tegra_i2s1: i2s@2901000 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901000 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S1>,
+						 <&bpmp TEGRA194_CLK_I2S1_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S1>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S1";
+					status = "disabled";
+				};
+
+				tegra_i2s2: i2s@2901100 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901100 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S2>,
+						 <&bpmp TEGRA194_CLK_I2S2_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S2>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S2";
+					status = "disabled";
+				};
+
+				tegra_i2s3: i2s@2901200 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901200 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S3>,
+						 <&bpmp TEGRA194_CLK_I2S3_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S3>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S3";
+					status = "disabled";
+				};
+
+				tegra_i2s4: i2s@2901300 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901300 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S4>,
+						 <&bpmp TEGRA194_CLK_I2S4_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S4>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S4";
+					status = "disabled";
+				};
+
+				tegra_i2s5: i2s@2901400 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901400 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S5>,
+						 <&bpmp TEGRA194_CLK_I2S5_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S5>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S5";
+					status = "disabled";
+				};
+
+				tegra_i2s6: i2s@2901500 {
+					compatible = "nvidia,tegra194-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901500 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_I2S6>,
+						 <&bpmp TEGRA194_CLK_I2S6_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA194_CLK_I2S6>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S6";
+					status = "disabled";
+				};
+
+				tegra_sfc1: sfc@2902000 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902000 0x0 0x200>;
+					sound-name-prefix = "SFC1";
+					status = "disabled";
+				};
+
+				tegra_sfc2: sfc@2902200 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902200 0x0 0x200>;
+					sound-name-prefix = "SFC2";
+					status = "disabled";
+				};
+
+				tegra_sfc3: sfc@2902400 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902400 0x0 0x200>;
+					sound-name-prefix = "SFC3";
+					status = "disabled";
+				};
+
+				tegra_sfc4: sfc@2902600 {
+					compatible = "nvidia,tegra194-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902600 0x0 0x200>;
+					sound-name-prefix = "SFC4";
+					status = "disabled";
+				};
+
+				tegra_amx1: amx@2903000 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903000 0x0 0x100>;
+					sound-name-prefix = "AMX1";
+					status = "disabled";
+				};
+
+				tegra_amx2: amx@2903100 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903100 0x0 0x100>;
+					sound-name-prefix = "AMX2";
+					status = "disabled";
+				};
+
+				tegra_amx3: amx@2903200 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903200 0x0 0x100>;
+					sound-name-prefix = "AMX3";
+					status = "disabled";
+				};
+
+				tegra_amx4: amx@2903300 {
+					compatible = "nvidia,tegra194-amx";
+					reg = <0x0 0x2903300 0x0 0x100>;
+					sound-name-prefix = "AMX4";
+					status = "disabled";
+				};
+
+				tegra_adx1: adx@2903800 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903800 0x0 0x100>;
+					sound-name-prefix = "ADX1";
+					status = "disabled";
+				};
+
+				tegra_adx2: adx@2903900 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903900 0x0 0x100>;
+					sound-name-prefix = "ADX2";
+					status = "disabled";
+				};
+
+				tegra_adx3: adx@2903a00 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903a00 0x0 0x100>;
+					sound-name-prefix = "ADX3";
+					status = "disabled";
+				};
+
+				tegra_adx4: adx@2903b00 {
+					compatible = "nvidia,tegra194-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903b00 0x0 0x100>;
+					sound-name-prefix = "ADX4";
+					status = "disabled";
+				};
+
+				tegra_dmic1: dmic@2904000 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904000 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+				};
+
+				tegra_dmic2: dmic@2904100 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904100 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC2>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC2>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+				};
+
+				tegra_dmic3: dmic@2904200 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904200 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC3>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC3>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC3";
+					status = "disabled";
+				};
+
+				tegra_dmic4: dmic@2904300 {
+					compatible = "nvidia,tegra194-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904300 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DMIC4>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DMIC4>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC4";
+					status = "disabled";
+				};
+
+				tegra_dspk1: dspk@2905000 {
+					compatible = "nvidia,tegra194-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905000 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+				};
+
+				tegra_dspk2: dspk@2905100 {
+					compatible = "nvidia,tegra194-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905100 0x0 0x100>;
+					clocks = <&bpmp TEGRA194_CLK_DSPK2>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA194_CLK_DSPK2>;
+					assigned-clock-parents = <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK2";
+					status = "disabled";
+				};
+
+				tegra_ope1: processing-engine@2908000 {
+					compatible = "nvidia,tegra194-ope",
+						     "nvidia,tegra210-ope";
+					reg = <0x0 0x2908000 0x0 0x100>;
+					sound-name-prefix = "OPE1";
+					status = "disabled";
+
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					equalizer@2908100 {
+						compatible = "nvidia,tegra194-peq",
+							     "nvidia,tegra210-peq";
+						reg = <0x0 0x2908100 0x0 0x100>;
+					};
+
+					dynamic-range-compressor@2908200 {
+						compatible = "nvidia,tegra194-mbdrc",
+							     "nvidia,tegra210-mbdrc";
+						reg = <0x0 0x2908200 0x0 0x200>;
+					};
+				};
+
+				tegra_mvc1: mvc@290a000 {
+					compatible = "nvidia,tegra194-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a000 0x0 0x200>;
+					sound-name-prefix = "MVC1";
+					status = "disabled";
+				};
+
+				tegra_mvc2: mvc@290a200 {
+					compatible = "nvidia,tegra194-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a200 0x0 0x200>;
+					sound-name-prefix = "MVC2";
+					status = "disabled";
+				};
+
+				tegra_amixer: amixer@290bb00 {
+					compatible = "nvidia,tegra194-amixer",
+						     "nvidia,tegra210-amixer";
+					reg = <0x0 0x290bb00 0x0 0x800>;
+					sound-name-prefix = "MIXER1";
+					status = "disabled";
+				};
+
+				tegra_admaif: admaif@290f000 {
+					compatible = "nvidia,tegra194-admaif",
+						     "nvidia,tegra186-admaif";
+					reg = <0x0 0x0290f000 0x0 0x1000>;
+					dmas = <&adma 1>, <&adma 1>,
+					       <&adma 2>, <&adma 2>,
+					       <&adma 3>, <&adma 3>,
+					       <&adma 4>, <&adma 4>,
+					       <&adma 5>, <&adma 5>,
+					       <&adma 6>, <&adma 6>,
+					       <&adma 7>, <&adma 7>,
+					       <&adma 8>, <&adma 8>,
+					       <&adma 9>, <&adma 9>,
+					       <&adma 10>, <&adma 10>,
+					       <&adma 11>, <&adma 11>,
+					       <&adma 12>, <&adma 12>,
+					       <&adma 13>, <&adma 13>,
+					       <&adma 14>, <&adma 14>,
+					       <&adma 15>, <&adma 15>,
+					       <&adma 16>, <&adma 16>,
+					       <&adma 17>, <&adma 17>,
+					       <&adma 18>, <&adma 18>,
+					       <&adma 19>, <&adma 19>,
+					       <&adma 20>, <&adma 20>;
+					dma-names = "rx1", "tx1",
+						    "rx2", "tx2",
+						    "rx3", "tx3",
+						    "rx4", "tx4",
+						    "rx5", "tx5",
+						    "rx6", "tx6",
+						    "rx7", "tx7",
+						    "rx8", "tx8",
+						    "rx9", "tx9",
+						    "rx10", "tx10",
+						    "rx11", "tx11",
+						    "rx12", "tx12",
+						    "rx13", "tx13",
+						    "rx14", "tx14",
+						    "rx15", "tx15",
+						    "rx16", "tx16",
+						    "rx17", "tx17",
+						    "rx18", "tx18",
+						    "rx19", "tx19",
+						    "rx20", "tx20";
+					status = "disabled";
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu TEGRA194_SID_APE>;
+				};
+
+				tegra_asrc: asrc@2910000 {
+					compatible = "nvidia,tegra194-asrc",
+						     "nvidia,tegra186-asrc";
+					reg = <0x0 0x2910000 0x0 0x2000>;
+					sound-name-prefix = "ASRC1";
+					status = "disabled";
+				};
+			};
+
+			adma: dma-controller@2930000 {
+				compatible = "nvidia,tegra194-adma",
+					     "nvidia,tegra186-adma";
+				reg = <0x0 0x02930000 0x0 0x20000>;
+				interrupt-parent = <&agic>;
+				interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&bpmp TEGRA194_CLK_AHUB>;
+				clock-names = "d_audio";
+				status = "disabled";
+			};
+
+			agic: interrupt-controller@2a40000 {
+				compatible = "nvidia,tegra194-agic",
+					     "nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x02a41000 0x0 0x1000>,
+				      <0x0 0x02a42000 0x0 0x2000>;
+				interrupts = <GIC_SPI 145
+					      (GIC_CPU_MASK_SIMPLE(4) |
+					       IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA194_CLK_APE>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+		};
+
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra194-mc";
+			reg = <0x0 0x02c00000 0x0 0x10000>,   /* MC-SID */
+			      <0x0 0x02c10000 0x0 0x10000>,   /* MC Broadcast*/
+			      <0x0 0x02c20000 0x0 0x10000>,   /* MC0 */
+			      <0x0 0x02c30000 0x0 0x10000>,   /* MC1 */
+			      <0x0 0x02c40000 0x0 0x10000>,   /* MC2 */
+			      <0x0 0x02c50000 0x0 0x10000>,   /* MC3 */
+			      <0x0 0x02b80000 0x0 0x10000>,   /* MC4 */
+			      <0x0 0x02b90000 0x0 0x10000>,   /* MC5 */
+			      <0x0 0x02ba0000 0x0 0x10000>,   /* MC6 */
+			      <0x0 0x02bb0000 0x0 0x10000>,   /* MC7 */
+			      <0x0 0x01700000 0x0 0x10000>,   /* MC8 */
+			      <0x0 0x01710000 0x0 0x10000>,   /* MC9 */
+			      <0x0 0x01720000 0x0 0x10000>,   /* MC10 */
+			      <0x0 0x01730000 0x0 0x10000>,   /* MC11 */
+			      <0x0 0x01740000 0x0 0x10000>,   /* MC12 */
+			      <0x0 0x01750000 0x0 0x10000>,   /* MC13 */
+			      <0x0 0x01760000 0x0 0x10000>,   /* MC14 */
+			      <0x0 0x01770000 0x0 0x10000>;   /* MC15 */
+			reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3",
+				    "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10",
+				    "ch11", "ch12", "ch13", "ch14", "ch15";
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x0 0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x0 0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra194-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_EMC>;
+				clock-names = "emc";
+
+				#interconnect-cells = <0>;
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
+		timer@3010000 {
+			compatible = "nvidia,tegra186-timer";
+			reg = <0x0 0x03010000 0x0 0x000e0000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		uarta: serial@3100000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03100000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTA>;
+			resets = <&bpmp TEGRA194_RESET_UARTA>;
+			status = "disabled";
+		};
+
+		uartb: serial@3110000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03110000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTB>;
+			resets = <&bpmp TEGRA194_RESET_UARTB>;
+			status = "disabled";
+		};
+
+		uartd: serial@3130000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03130000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTD>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTD>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		uarte: serial@3140000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03140000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTE>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTE>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		uartf: serial@3150000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03150000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTF>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTF>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		gen1_i2c: i2c@3160000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x03160000 0x0 0x10000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C1>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C1>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 21>, <&gpcdma 21>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uarth: serial@3170000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03170000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTH>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTH>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		cam_i2c: i2c@3180000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x03180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C3>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C3>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 23>, <&gpcdma 23>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux1 */
+		dp_aux_ch1_i2c: i2c@3190000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x03190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C4>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C4>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux1_i2c>;
+			pinctrl-1 = <&state_dpaux1_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 26>, <&gpcdma 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux0 */
+		dp_aux_ch0_i2c: i2c@31b0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x031b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C6>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C6>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux0_i2c>;
+			pinctrl-1 = <&state_dpaux0_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 30>, <&gpcdma 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux2 */
+		dp_aux_ch2_i2c: i2c@31c0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x031c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C7>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C7>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux2_i2c>;
+			pinctrl-1 = <&state_dpaux2_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 27>, <&gpcdma 27>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		/* shares pads with dpaux3 */
+		dp_aux_ch3_i2c: i2c@31e0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x031e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C9>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C9>;
+			reset-names = "i2c";
+			pinctrl-0 = <&state_dpaux3_i2c>;
+			pinctrl-1 = <&state_dpaux3_off>;
+			pinctrl-names = "default", "idle";
+			dmas = <&gpcdma 31>, <&gpcdma 31>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi@3270000 {
+			compatible = "nvidia,tegra194-qspi";
+			reg = <0x0 0x3270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_QSPI0>,
+				 <&bpmp TEGRA194_CLK_QSPI0_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA194_RESET_QSPI0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@3280000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x3280000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM1>;
+			resets = <&bpmp TEGRA194_RESET_PWM1>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm2: pwm@3290000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x3290000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM2>;
+			resets = <&bpmp TEGRA194_RESET_PWM2>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm3: pwm@32a0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32a0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM3>;
+			resets = <&bpmp TEGRA194_RESET_PWM3>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm5: pwm@32c0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32c0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM5>;
+			resets = <&bpmp TEGRA194_RESET_PWM5>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm6: pwm@32d0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32d0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM6>;
+			resets = <&bpmp TEGRA194_RESET_PWM6>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm7: pwm@32e0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32e0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM7>;
+			resets = <&bpmp TEGRA194_RESET_PWM7>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm8: pwm@32f0000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0x32f0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM8>;
+			resets = <&bpmp TEGRA194_RESET_PWM8>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		spi@3300000 {
+			compatible = "nvidia,tegra194-qspi";
+			reg = <0x0 0x3300000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_QSPI1>,
+				 <&bpmp TEGRA194_CLK_QSPI1_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA194_RESET_QSPI1>;
+			status = "disabled";
+		};
+
+		sdmmc1: mmc@3400000 {
+			compatible = "nvidia,tegra194-sdhci";
+			reg = <0x0 0x03400000 0x0 0x10000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>;
+			assigned-clock-parents =
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>,
+					  <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_SDMMC1>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <0x9>;
+			nvidia,default-trim = <0x5>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
+			status = "disabled";
+		};
+
+		sdmmc3: mmc@3440000 {
+			compatible = "nvidia,tegra194-sdhci";
+			reg = <0x0 0x03440000 0x0 0x10000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>;
+			assigned-clock-parents =
+					  <&bpmp TEGRA194_CLK_PLLC4_MUXED>,
+					  <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_SDMMC3>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc3_3v3>;
+			pinctrl-1 = <&sdmmc3_1v8>;
+			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout =
+									<0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <0x9>;
+			nvidia,default-trim = <0x5>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
+			status = "disabled";
+		};
+
+		sdmmc4: mmc@3460000 {
+			compatible = "nvidia,tegra194-sdhci";
+			reg = <0x0 0x03460000 0x0 0x10000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+				 <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+					  <&bpmp TEGRA194_CLK_PLLC4>;
+			assigned-clock-parents =
+					  <&bpmp TEGRA194_CLK_PLLC4>;
+			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_SDMMC4>;
+			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout =
+									<0x0a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
+									<0x0a>;
+			nvidia,default-tap = <0x8>;
+			nvidia,default-trim = <0x14>;
+			nvidia,dqs-trim = <40>;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+			supports-cqe;
+			status = "disabled";
+		};
+
+		hda@3510000 {
+			compatible = "nvidia,tegra194-hda";
+			reg = <0x0 0x3510000 0x0 0x10000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_HDA>,
+				 <&bpmp TEGRA194_CLK_HDA2HDMICODEC>,
+				 <&bpmp TEGRA194_CLK_HDA2CODEC_2X>;
+			clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+			resets = <&bpmp TEGRA194_RESET_HDA>,
+				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
+			reset-names = "hda", "hda2hdmi";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_HDA>;
+			status = "disabled";
+		};
+
+		xusb_padctl: padctl@3520000 {
+			compatible = "nvidia,tegra194-xusb-padctl";
+			reg = <0x0 0x03520000 0x0 0x1000>,
+			      <0x0 0x03540000 0x0 0x1000>;
+			reg-names = "padctl", "ao";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA194_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb@3550000 {
+			compatible = "nvidia,tegra194-xudc";
+			reg = <0x0 0x03550000 0x0 0x8000>,
+			      <0x0 0x03558000 0x0 0x1000>;
+			reg-names = "base", "fpci";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_DEV>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>;
+			clock-names = "dev", "ss", "ss_src", "fs_src";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_XUSB_DEVW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_XUSB_DEV>;
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBB>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "dev", "ss";
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb@3610000 {
+			compatible = "nvidia,tegra194-xusb";
+			reg = <0x0 0x03610000 0x0 0x40000>,
+			      <0x0 0x03600000 0x0 0x10000>;
+			reg-names = "hcd", "fpci";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA194_CLK_XUSB_SS>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_XUSB_FS>,
+				 <&bpmp TEGRA194_CLK_UTMIPLL>,
+				 <&bpmp TEGRA194_CLK_CLK_M>,
+				 <&bpmp TEGRA194_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu TEGRA194_SID_XUSB_HOST>;
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			status = "disabled";
+		};
+
+		fuse@3820000 {
+			compatible = "nvidia,tegra194-efuse";
+			reg = <0x0 0x03820000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "fuse";
+		};
+
+		gic: interrupt-controller@3881000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x03881000 0x0 0x1000>,
+			      <0x0 0x03882000 0x0 0x2000>,
+			      <0x0 0x03884000 0x0 0x2000>,
+			      <0x0 0x03886000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-parent = <&gic>;
+		};
+
+		cec@3960000 {
+			compatible = "nvidia,tegra194-cec";
+			reg = <0x0 0x03960000 0x0 0x10000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_CEC>;
+			clock-names = "cec";
+			status = "disabled";
+		};
+
+		hte_lic: hardware-timestamp@3aa0000 {
+			compatible = "nvidia,tegra194-gte-lic";
+			reg = <0x0 0x3aa0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <11>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
+		hsp_top0: hsp@3c00000 {
+			compatible = "nvidia,tegra194-hsp";
+			reg = <0x0 0x03c00000 0x0 0xa0000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+			                  "shared3", "shared4", "shared5", "shared6",
+			                  "shared7";
+			#mbox-cells = <2>;
+		};
+
+		p2u_hsio_0: phy@3e10000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e10000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_1: phy@3e20000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_2: phy@3e30000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_3: phy@3e40000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_4: phy@3e50000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e50000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_5: phy@3e60000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e60000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_6: phy@3e70000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e70000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_7: phy@3e80000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e80000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_8: phy@3e90000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03e90000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_9: phy@3ea0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ea0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_0: phy@3eb0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03eb0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_1: phy@3ec0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ec0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_2: phy@3ed0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ed0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_3: phy@3ee0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ee0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_4: phy@3ef0000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03ef0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_5: phy@3f00000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f00000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_6: phy@3f10000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f10000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_7: phy@3f20000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_10: phy@3f30000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_11: phy@3f40000 {
+			compatible = "nvidia,tegra194-p2u";
+			reg = <0x0 0x03f40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		sce-noc@b600000 {
+			compatible = "nvidia,tegra194-sce-noc";
+			reg = <0x0 0xb600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		rce-noc@be00000 {
+			compatible = "nvidia,tegra194-rce-noc";
+			reg = <0x0 0xbe00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		hsp_aon: hsp@c150000 {
+			compatible = "nvidia,tegra194-hsp";
+			reg = <0x0 0x0c150000 0x0 0x90000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * Shared interrupt 0 is routed only to AON/SPE, so
+			 * we only have 4 shared interrupts for the CCPLEX.
+			 */
+			interrupt-names = "shared1", "shared2", "shared3", "shared4";
+			#mbox-cells = <2>;
+		};
+
+		hte_aon: hardware-timestamp@c1e0000 {
+			compatible = "nvidia,tegra194-gte-aon";
+			reg = <0x0 0xc1e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,slices = <3>;
+			#timestamp-cells = <1>;
+			status = "okay";
+		};
+
+		gen2_i2c: i2c@c240000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x0c240000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C2>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C2>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 22>, <&gpcdma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		gen8_i2c: i2c@c250000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x0c250000 0x0 0x10000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA194_CLK_I2C8>;
+			clock-names = "div-clk";
+			resets = <&bpmp TEGRA194_RESET_I2C8>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 0>, <&gpcdma 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uartc: serial@c280000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x0c280000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTC>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTC>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		uartg: serial@c290000 {
+			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x0c290000 0x0 0x40>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_UARTG>;
+			clock-names = "serial";
+			resets = <&bpmp TEGRA194_RESET_UARTG>;
+			reset-names = "serial";
+			status = "disabled";
+		};
+
+		rtc: rtc@c2a0000 {
+			compatible = "nvidia,tegra194-rtc", "nvidia,tegra20-rtc";
+			reg = <0x0 0x0c2a0000 0x0 0x10000>;
+			interrupt-parent = <&pmc>;
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_CLK_32K>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		gpio_aon: gpio@c2f0000 {
+			compatible = "nvidia,tegra194-gpio-aon";
+			reg-names = "security", "gpio";
+			reg = <0x0 0xc2f0000 0x0 0x1000>,
+			      <0x0 0xc2f1000 0x0 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pinmux_aon 0 0 30>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra194-pinmux-aon";
+			reg = <0x0 0xc300000 0x0 0x4000>;
+
+			status = "okay";
+		};
+
+		pwm4: pwm@c340000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x0 0xc340000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA194_CLK_PWM4>;
+			resets = <&bpmp TEGRA194_RESET_PWM4>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pmc: pmc@c360000 {
+			compatible = "nvidia,tegra194-pmc";
+			reg = <0x0 0x0c360000 0x0 0x10000>,
+			      <0x0 0x0c370000 0x0 0x10000>,
+			      <0x0 0x0c380000 0x0 0x10000>,
+			      <0x0 0x0c390000 0x0 0x10000>,
+			      <0x0 0x0c3a0000 0x0 0x10000>;
+			reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+		};
+
+		aon-noc@c600000 {
+			compatible = "nvidia,tegra194-aon-noc";
+			reg = <0x0 0xc600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		bpmp-noc@d600000 {
+			compatible = "nvidia,tegra194-bpmp-noc";
+			reg = <0x0 0xd600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		iommu@10000000 {
+			compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x10000000 0x0 0x800000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "disabled";
+		};
+
+		smmu: iommu@12000000 {
+			compatible = "nvidia,tegra194-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x12000000 0x0 0x800000>,
+			      <0x0 0x11000000 0x0 0x800000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			compatible = "nvidia,tegra194-host1x";
+			reg = <0x0 0x13e00000 0x0 0x10000>,
+			      <0x0 0x13e10000 0x0 0x10000>;
+			reg-names = "hypervisor", "vm";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "syncpt", "host1x";
+			clocks = <&bpmp TEGRA194_CLK_HOST1X>;
+			clock-names = "host1x";
+			resets = <&bpmp TEGRA194_RESET_HOST1X>;
+			reset-names = "host1x";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x14800000 0x0 0x14800000 0x0 0x02800000>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
+			interconnect-names = "dma-mem";
+			iommus = <&smmu TEGRA194_SID_HOST1X>;
+			dma-coherent;
+
+			/* Context isolation domains */
+			iommu-map = <0 &smmu TEGRA194_SID_HOST1X_CTX0 1>,
+				    <1 &smmu TEGRA194_SID_HOST1X_CTX1 1>,
+				    <2 &smmu TEGRA194_SID_HOST1X_CTX2 1>,
+				    <3 &smmu TEGRA194_SID_HOST1X_CTX3 1>,
+				    <4 &smmu TEGRA194_SID_HOST1X_CTX4 1>,
+				    <5 &smmu TEGRA194_SID_HOST1X_CTX5 1>,
+				    <6 &smmu TEGRA194_SID_HOST1X_CTX6 1>,
+				    <7 &smmu TEGRA194_SID_HOST1X_CTX7 1>;
+
+			nvdec@15140000 {
+				compatible = "nvidia,tegra194-nvdec";
+				reg = <0x0 0x15140000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVDEC1>;
+				clock-names = "nvdec";
+				resets = <&bpmp TEGRA194_RESET_NVDEC1>;
+				reset-names = "nvdec";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECB>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDEC1SRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDEC1SWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVDEC1>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0xf5>;
+			};
+
+			display-hub@15200000 {
+				compatible = "nvidia,tegra194-display";
+				reg = <0x0 0x15200000 0x0 0x00040000>;
+				resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+				reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+					      "wgrp3", "wgrp4", "wgrp5";
+				clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+					 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+				clock-names = "disp", "hub";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
+
+				display@15200000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15200000 0x0 0x10000>;
+					interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <0>;
+				};
+
+				display@15210000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15210000 0x0 0x10000>;
+					interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <1>;
+				};
+
+				display@15220000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15220000 0x0 0x10000>;
+					interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <2>;
+				};
+
+				display@15230000 {
+					compatible = "nvidia,tegra194-dc";
+					reg = <0x0 0x15230000 0x0 0x10000>;
+					interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+					clock-names = "dc";
+					resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+					reset-names = "dc";
+
+					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
+
+					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+					nvidia,head = <3>;
+				};
+			};
+
+			vic@15340000 {
+				compatible = "nvidia,tegra194-vic";
+				reg = <0x0 0x15340000 0x0 0x00040000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_VIC>;
+				clock-names = "vic";
+				resets = <&bpmp TEGRA194_RESET_VIC>;
+				reset-names = "vic";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu TEGRA194_SID_VIC>;
+				dma-coherent;
+			};
+
+			nvjpg@15380000 {
+				compatible = "nvidia,tegra194-nvjpg";
+				reg = <0x0 0x15380000 0x0 0x40000>;
+				clocks = <&bpmp TEGRA194_CLK_NVJPG>;
+				clock-names = "nvjpg";
+				resets = <&bpmp TEGRA194_RESET_NVJPG>;
+				reset-names = "nvjpg";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVJPG>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVJPGSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVJPGSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu TEGRA194_SID_NVJPG>;
+				dma-coherent;
+			};
+
+			nvdec@15480000 {
+				compatible = "nvidia,tegra194-nvdec";
+				reg = <0x0 0x15480000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVDEC>;
+				clock-names = "nvdec";
+				resets = <&bpmp TEGRA194_RESET_NVDEC>;
+				reset-names = "nvdec";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVDECA>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDECSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDECSRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVDECSWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVDEC>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0xf0>;
+			};
+
+			nvenc@154c0000 {
+				compatible = "nvidia,tegra194-nvenc";
+				reg = <0x0 0x154c0000 0x0 0x40000>;
+				clocks = <&bpmp TEGRA194_CLK_NVENC>;
+				clock-names = "nvenc";
+				resets = <&bpmp TEGRA194_RESET_NVENC>;
+				reset-names = "nvenc";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVENCA>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVENCSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENCSRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENCSWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVENC>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0x21>;
+			};
+
+			dpaux0: dpaux@155c0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155c0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux0_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux0_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux0_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			dpaux1: dpaux@155d0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155d0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX1>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX1>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux1_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux1_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux1_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			dpaux2: dpaux@155e0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155e0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX2>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX2>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux2_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux2_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux2_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			dpaux3: dpaux@155f0000 {
+				compatible = "nvidia,tegra194-dpaux";
+				reg = <0x0 0x155f0000 0x0 0x10000>;
+				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_DPAUX3>,
+					 <&bpmp TEGRA194_CLK_PLLDP>;
+				clock-names = "dpaux", "parent";
+				resets = <&bpmp TEGRA194_RESET_DPAUX3>;
+				reset-names = "dpaux";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+				state_dpaux3_aux: pinmux-aux {
+					groups = "dpaux-io";
+					function = "aux";
+				};
+
+				state_dpaux3_i2c: pinmux-i2c {
+					groups = "dpaux-io";
+					function = "i2c";
+				};
+
+				state_dpaux3_off: pinmux-off {
+					groups = "dpaux-io";
+					function = "off";
+				};
+
+				i2c-bus {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			nvenc@15a80000 {
+				compatible = "nvidia,tegra194-nvenc";
+				reg = <0x0 0x15a80000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA194_CLK_NVENC1>;
+				clock-names = "nvenc";
+				resets = <&bpmp TEGRA194_RESET_NVENC1>;
+				reset-names = "nvenc";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_NVENCB>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVENC1SRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENC1SRD1 &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_NVENC1SWR &emc>;
+				interconnect-names = "dma-mem", "read-1", "write";
+				iommus = <&smmu TEGRA194_SID_NVENC1>;
+				dma-coherent;
+
+				nvidia,host1x-class = <0x22>;
+			};
+
+			sor0: sor@15b00000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15b00000 0x0 0x40000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR0_REF>,
+					 <&bpmp TEGRA194_CLK_SOR0_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR0_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR0>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux0_aux>;
+				pinctrl-1 = <&state_dpaux0_i2c>;
+				pinctrl-2 = <&state_dpaux0_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <0>;
+			};
+
+			sor1: sor@15b40000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15b40000 0x0 0x40000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR1_REF>,
+					 <&bpmp TEGRA194_CLK_SOR1_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD2>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR1_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR1>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux1_aux>;
+				pinctrl-1 = <&state_dpaux1_i2c>;
+				pinctrl-2 = <&state_dpaux1_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <1>;
+			};
+
+			sor2: sor@15b80000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15b80000 0x0 0x40000>;
+				interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR2_REF>,
+					 <&bpmp TEGRA194_CLK_SOR2_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD3>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR2_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR2>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux2_aux>;
+				pinctrl-1 = <&state_dpaux2_i2c>;
+				pinctrl-2 = <&state_dpaux2_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <2>;
+			};
+
+			sor3: sor@15bc0000 {
+				compatible = "nvidia,tegra194-sor";
+				reg = <0x0 0x15bc0000 0x0 0x40000>;
+				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA194_CLK_SOR3_REF>,
+					 <&bpmp TEGRA194_CLK_SOR3_OUT>,
+					 <&bpmp TEGRA194_CLK_PLLD4>,
+					 <&bpmp TEGRA194_CLK_PLLDP>,
+					 <&bpmp TEGRA194_CLK_SOR_SAFE>,
+					 <&bpmp TEGRA194_CLK_SOR3_PAD_CLKOUT>;
+				clock-names = "sor", "out", "parent", "dp", "safe",
+					      "pad";
+				resets = <&bpmp TEGRA194_RESET_SOR3>;
+				reset-names = "sor";
+				pinctrl-0 = <&state_dpaux3_aux>;
+				pinctrl-1 = <&state_dpaux3_i2c>;
+				pinctrl-2 = <&state_dpaux3_off>;
+				pinctrl-names = "aux", "i2c", "off";
+				status = "disabled";
+
+				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+				nvidia,interface = <3>;
+			};
+		};
+
+		pcie@14100000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			linux,pci-domain = <1>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_1>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 1>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+				 <0x02000000 0x0  0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14120000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			linux,pci-domain = <2>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_2>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 2>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+				 <0x02000000 0x0  0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14140000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			linux,pci-domain = <3>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_3>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 3>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+				 <0x02000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14160000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			linux,pci-domain = <4>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 4>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+				 <0x02000000 0x0  0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie-ep@14160000 {
+			compatible = "nvidia,tegra194-pcie-ep";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			status = "disabled";
+
+			num-lanes = <4>;
+			num-ib-windows = <2>;
+			num-ob-windows = <8>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 4>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@14180000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			linux,pci-domain = <0>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 0>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+				 <0x02000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie-ep@14180000 {
+			compatible = "nvidia,tegra194-pcie-ep";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			status = "disabled";
+
+			num-lanes = <8>;
+			num-ib-windows = <2>;
+			num-ob-windows = <8>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+				 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 0>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie@141a0000 {
+			compatible = "nvidia,tegra194-pcie";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+			reg-names = "appl", "config", "atu_dma", "dbi";
+
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			linux,pci-domain = <5>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_rst_c5_out_state>, <&pex_clkreq_c5_bi_dir_state>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+				 <0x02000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+				 <0x01000000 0x0  0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		pcie-ep@141a0000 {
+			compatible = "nvidia,tegra194-pcie-ep";
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			status = "disabled";
+
+			num-lanes = <8>;
+			num-ib-windows = <2>;
+			num-ob-windows = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pex_clkreq_c5_bi_dir_state>;
+
+			clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+		};
+
+		gpu@17000000 {
+			compatible = "nvidia,gv11b";
+			reg = <0x0 0x17000000 0x0 0x1000000>,
+			      <0x0 0x18000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "stall", "nonstall";
+			clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+				 <&bpmp TEGRA194_CLK_GPU_PWR>,
+				 <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "gpu", "pwr", "fuse";
+			resets = <&bpmp TEGRA194_RESET_GPU>;
+			reset-names = "gpu";
+			dma-coherent;
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>;
+			interconnect-names = "dma-mem", "read-0-hp", "write-0",
+					     "read-1", "read-1-hp", "write-1",
+					     "read-2", "read-2-hp", "write-2",
+					     "read-3", "read-3-hp", "write-3";
+		};
+	};
+
+	sram@40000000 {
+		compatible = "nvidia,tegra194-sysram", "mmio-sram";
+		reg = <0x0 0x40000000 0x0 0x50000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40000000 0x50000>;
+
+		no-memory-wc;
+
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+				    TEGRA_HSP_DB_MASTER_BPMP>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu TEGRA194_SID_BPMP>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bpmp_thermal: thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	cpus {
+		compatible = "nvidia,tegra194-ccplex";
+		nvidia,bpmp = <&bpmp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0_0: cpu@0 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x000>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_0>;
+		};
+
+		cpu0_1: cpu@1 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x001>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_0>;
+		};
+
+		cpu1_0: cpu@100 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_1>;
+		};
+
+		cpu1_1: cpu@101 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x101>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_1>;
+		};
+
+		cpu2_0: cpu@200 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_2>;
+		};
+
+		cpu2_1: cpu@201 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x201>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_2>;
+		};
+
+		cpu3_0: cpu@300 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x300>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_3>;
+		};
+
+		cpu3_1: cpu@301 {
+			compatible = "nvidia,tegra194-carmel";
+			device_type = "cpu";
+			reg = <0x301>;
+			enable-method = "psci";
+			i-cache-size = <131072>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <512>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c_3>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0_0>;
+				};
+
+				core1 {
+					cpu = <&cpu0_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu1_0>;
+				};
+
+				core1 {
+					cpu = <&cpu1_1>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu2_0>;
+				};
+
+				core1 {
+					cpu = <&cpu2_1>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&cpu3_0>;
+				};
+
+				core1 {
+					cpu = <&cpu3_1>;
+				};
+			};
+		};
+
+		l2c_0: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l2c_1: l2-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l2c_2: l2-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l2c_3: l2-cache3 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+			next-level-cache = <&l3c>;
+		};
+
+		l3c: l3-cache {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <4194304>;
+			cache-line-size = <64>;
+			cache-level = <3>;
+			cache-sets = <4096>;
+		};
+	};
+
+	pmu {
+		compatible = "nvidia,carmel-pmu";
+		interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0_0 &cpu0_1 &cpu1_0 &cpu1_1
+				      &cpu2_0 &cpu2_1 &cpu3_0 &cpu3_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	tcu: serial {
+		compatible = "nvidia,tegra194-tcu";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
+			 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>;
+		mbox-names = "rx", "tx";
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA194_CLK_PLLA>,
+			 <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA194_CLK_PLLA>,
+				  <&bpmp TEGRA194_CLK_PLLA_OUT0>,
+				  <&bpmp TEGRA194_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA194_CLK_PLLA>,
+					 <&bpmp TEGRA194_CLK_PLLA_OUT0>;
+		/*
+		 * PLLA supports dynamic ramp. Below initial rate is chosen
+		 * for this to work and oscillate between base rates required
+		 * for 8x and 11.025x sample rate streams.
+		 */
+		assigned-clock-rates = <258000000>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_CPU>;
+			status = "disabled";
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_GPU>;
+			status = "disabled";
+		};
+
+		aux-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_AUX>;
+			status = "disabled";
+		};
+
+		pllx-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_PLLX>;
+			status = "disabled";
+		};
+
+		ao-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_AO>;
+			status = "disabled";
+		};
+
+		tj-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		always-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
new file mode 100644
index 000000000..0ae5a44f7
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1";
+	compatible = "nvidia,p2180", "nvidia,tegra210";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/pmic@3c";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	/* debug port */
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+
+		/* module ID EEPROM */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupt-parent = <&tegra_pmc>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,suspend-fps-time-period-us = <1280>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				gpio2_3 {
+					pins = "gpio2", "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&vdd_pre>;
+				in-ldo7-8-supply = <&vdd_pre>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+
+				vdd_soc: sd0 {
+					regulator-name = "VDD_SOC";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <146>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_ddr: sd1 {
+					regulator-name = "VDD_DDR_1V1_PMIC";
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <130>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_pre: sd2 {
+					regulator-name = "VDD_PRE_REG_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vdd_1v8: sd3 {
+					regulator-name = "VDD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <242>;
+					regulator-ramp-delay = <27500>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_sys_1v2: ldo0 {
+					regulator-name = "AVDD_SYS_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_pex_1v05: ldo1 {
+					regulator-name = "VDD_PEX_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				vddio_sdmmc: ldo2 {
+					regulator-name = "VDDIO_SDMMC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_cam_hv: ldo3 {
+					regulator-name = "VDD_CAM_HV";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_rtc: ldo4 {
+					regulator-name = "VDD_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				vdd_ts_hv: ldo5 {
+					regulator-name = "VDD_TS_HV";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				vdd_ts: ldo6 {
+					regulator-name = "VDD_TS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				avdd_1v05_pll: ldo7 {
+					regulator-name = "AVDD_1V05_PLL";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				avdd_1v05: ldo8 {
+					regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <4587 3876>;
+		nvidia,core-pwr-off-time = <39065>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+		vqmmc-supply = <&vdd_1v8>;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				status = "okay";
+			};
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 8000>;
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts
new file mode 100644
index 000000000..21c6d3749
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p2530.dtsi"
+#include "tegra210-p2595.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2371 (P2530/P2595) reference design";
+	compatible = "nvidia,p2371-0000", "nvidia,tegra210";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
new file mode 100644
index 000000000..a6a58e518
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -0,0 +1,1384 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p2180.dtsi"
+#include "tegra210-p2597.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1 Developer Kit";
+	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+
+	pcie@1003000 {
+		status = "okay";
+
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0";
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+			panel@0 {
+				compatible = "auo,b080uan01";
+				reg = <0>;
+
+				enable-gpios = <&gpio TEGRA_GPIO(V, 2)
+						GPIO_ACTIVE_HIGH>;
+				power-supply = <&vdd_5v0_io>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		backlight: backlight@2c {
+			compatible = "ti,lp8557";
+			reg = <0x2c>;
+			power-supply = <&vdd_3v3_sys>;
+
+			dev-ctrl = /bits/ 8 <0x80>;
+			init-brt = /bits/ 8 <0xff>;
+
+			pwms = <&pwm 0 29334>;
+			pwm-names = "lp8557";
+
+			/* boost frequency 1 MHz */
+			rom-13h {
+				rom-addr = /bits/ 8 <0x13>;
+				rom-val = /bits/ 8 <0x01>;
+			};
+
+			/* 3 LED string */
+			rom-14h {
+				rom-addr = /bits/ 8 <0x14>;
+				rom-val = /bits/ 8 <0x87>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		/* carrier board ID EEPROM */
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	clock@70110000 {
+		status = "okay";
+
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
+	aconnect@702c0000 {
+		status = "okay";
+
+		ahub@702d0800 {
+			status = "okay";
+
+			admaif@702d0000 {
+				status = "okay";
+			};
+
+			i2s@702d1000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s1_ep>;
+						};
+					};
+
+					i2s1_port: port@1 {
+						reg = <1>;
+
+						i2s1_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s2_ep>;
+						};
+					};
+
+					i2s2_port: port@1 {
+						reg = <1>;
+
+						i2s2_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s4_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s4_ep>;
+						};
+					};
+
+					i2s4_port: port@1 {
+						reg = <1>;
+
+						i2s4_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s5_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s5_ep>;
+						};
+					};
+
+					i2s5_port: port@1 {
+						reg = <1>;
+
+						i2s5_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			sfc@702d2000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_in_ep>;
+						};
+					};
+
+					sfc1_out_port: port@1 {
+						reg = <1>;
+
+						sfc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_in_ep>;
+						};
+					};
+
+					sfc2_out_port: port@1 {
+						reg = <1>;
+
+						sfc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc3_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_in_ep>;
+						};
+					};
+
+					sfc3_out_port: port@1 {
+						reg = <1>;
+
+						sfc3_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2600 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc4_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_in_ep>;
+						};
+					};
+
+					sfc4_out_port: port@1 {
+						reg = <1>;
+
+						sfc4_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx1_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx1_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx1_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx1_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in4_ep>;
+						};
+					};
+
+					amx1_out_port: port@4 {
+						reg = <4>;
+
+						amx1_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx2_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx2_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in2_ep>;
+						};
+					};
+
+					amx2_in3_port: port@2 {
+						reg = <2>;
+
+						amx2_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in3_ep>;
+						};
+					};
+
+					amx2_in4_port: port@3 {
+						reg = <3>;
+
+						amx2_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in4_ep>;
+						};
+					};
+
+					amx2_out_port: port@4 {
+						reg = <4>;
+
+						amx2_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_out_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx1_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_in_ep>;
+						};
+					};
+
+					adx1_out1_port: port@1 {
+						reg = <1>;
+
+						adx1_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out1_ep>;
+						};
+					};
+
+					adx1_out2_port: port@2 {
+						reg = <2>;
+
+						adx1_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out2_ep>;
+						};
+					};
+
+					adx1_out3_port: port@3 {
+						reg = <3>;
+
+						adx1_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out3_ep>;
+						};
+					};
+
+					adx1_out4_port: port@4 {
+						reg = <4>;
+
+						adx1_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3900 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx2_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_in_ep>;
+						};
+					};
+
+					adx2_out1_port: port@1 {
+						reg = <1>;
+
+						adx2_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out1_ep>;
+						};
+					};
+
+					adx2_out2_port: port@2 {
+						reg = <2>;
+
+						adx2_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out2_ep>;
+						};
+					};
+
+					adx2_out3_port: port@3 {
+						reg = <3>;
+
+						adx2_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out3_ep>;
+						};
+					};
+
+					adx2_out4_port: port@4 {
+						reg = <4>;
+
+						adx2_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out4_ep>;
+						};
+					};
+				};
+			};
+
+			dmic@702d4000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@702d4100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@702d4200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic3_ep>;
+						};
+					};
+
+					dmic3_port: port@1 {
+						reg = <1>;
+
+						dmic3_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_in_ep>;
+						};
+					};
+
+					ope1_out_port: port@1 {
+						reg = <0x1>;
+
+						ope1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_out_ep>;
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_in_ep>;
+						};
+					};
+
+					ope2_out_port: port@1 {
+						reg = <0x1>;
+
+						ope2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amixer@702dbb00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						mixer_in1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						mixer_in2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						mixer_in3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						mixer_in4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						mixer_in5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						mixer_in6_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						mixer_in7_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in7_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						mixer_in8_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in8_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						mixer_in9_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in9_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						mixer_in10_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in10_ep>;
+						};
+					};
+
+					mixer_out1_port: port@a {
+						reg = <0xa>;
+
+						mixer_out1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out1_ep>;
+						};
+					};
+
+					mixer_out2_port: port@b {
+						reg = <0xb>;
+
+						mixer_out2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out2_ep>;
+						};
+					};
+
+					mixer_out3_port: port@c {
+						reg = <0xc>;
+
+						mixer_out3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out3_ep>;
+						};
+					};
+
+					mixer_out4_port: port@d {
+						reg = <0xd>;
+
+						mixer_out4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out4_ep>;
+						};
+					};
+
+					mixer_out5_port: port@e {
+						reg = <0xe>;
+
+						mixer_out5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out5_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				xbar_i2s1_port: port@a {
+					reg = <0xa>;
+
+					xbar_i2s1_ep: endpoint {
+						remote-endpoint = <&i2s1_cif_ep>;
+					};
+				};
+
+				xbar_i2s2_port: port@b {
+					reg = <0xb>;
+
+					xbar_i2s2_ep: endpoint {
+						remote-endpoint = <&i2s2_cif_ep>;
+					};
+				};
+
+				xbar_i2s3_port: port@c {
+					reg = <0xc>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@d {
+					reg = <0xd>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_i2s5_port: port@e {
+					reg = <0xe>;
+
+					xbar_i2s5_ep: endpoint {
+						remote-endpoint = <&i2s5_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@f {
+					reg = <0xf>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@10 {
+					reg = <0x10>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_dmic3_port: port@11 {
+					reg = <0x11>;
+
+					xbar_dmic3_ep: endpoint {
+						remote-endpoint = <&dmic3_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@12 {
+					reg = <0x12>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@14 {
+					reg = <0x14>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@15 {
+					reg = <0x15>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@16 {
+					reg = <0x16>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@17 {
+					reg = <0x17>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@18 {
+					reg = <0x18>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@19 {
+					reg = <0x19>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@1b {
+					reg = <0x1b>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@1d {
+					reg = <0x1d>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@20 {
+					reg = <0x20>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@21 {
+					reg = <0x21>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@22 {
+					reg = <0x22>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@23 {
+					reg = <0x23>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@24 {
+					reg = <0x24>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@25 {
+					reg = <0x25>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@26 {
+					reg = <0x26>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@2a {
+					reg = <0x2a>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@2c {
+					reg = <0x2c>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@2e {
+					reg = <0x2e>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@2f {
+					reg = <0x2f>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@31 {
+					reg = <0x31>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@32 {
+					reg = <0x32>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@33 {
+					reg = <0x33>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@34 {
+					reg = <0x34>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@35 {
+					reg = <0x35>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@36 {
+					reg = <0x36>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@37 {
+					reg = <0x37>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@38 {
+					reg = <0x38>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@39 {
+					reg = <0x39>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@3a {
+					reg = <0x3a>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@3c {
+					reg = <0x3c>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@3d {
+					reg = <0x3d>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@3e {
+					reg = <0x3e>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@40 {
+					reg = <0x40>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@41 {
+					reg = <0x41>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+
+				xbar_ope2_in_port: port@43 {
+					reg = <0x43>;
+
+					xbar_ope2_in_ep: endpoint {
+						remote-endpoint = <&ope2_cif_in_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_ope2_out_ep: endpoint {
+						remote-endpoint = <&ope2_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@702e2000 {
+			status = "okay";
+		};
+
+		interrupt-controller@702f9000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra210-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>,
+		       <&admaif7_port>, <&admaif8_port>, <&admaif9_port>,
+		       <&admaif10_port>,
+		       /* Router */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s3_port>,
+		       <&xbar_i2s4_port>, <&xbar_i2s5_port>, <&xbar_dmic1_port>,
+		       <&xbar_dmic2_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_ope1_in_port>, <&xbar_ope2_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&ope1_out_port>, <&ope2_out_port>,
+		       /* I/O DAP Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
+		       <&i2s5_port>, <&dmic1_port>, <&dmic2_port>, <&dmic3_port>;
+
+		label = "NVIDIA Jetson TX1 APE";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
new file mode 100644
index 000000000..f0d53f0b4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2530 main board";
+	compatible = "nvidia,p2530", "nvidia,tegra210";
+
+	aliases {
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* debug port */
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	mmc@700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts
new file mode 100644
index 000000000..e2a347e57
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts
@@ -0,0 +1,1303 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra210-p2530.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2571 reference design";
+	compatible = "nvidia,p2571", "nvidia,tegra210";
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi
new file mode 100644
index 000000000..65181da73
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi
@@ -0,0 +1,1276 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+/ {
+	model = "NVIDIA Tegra210 P2595 I/O board";
+	compatible = "nvidia,p2595", "nvidia,tegra210";
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "dmic1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "dmic1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "dmic2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "dmic2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
new file mode 100644
index 000000000..b4a1108c2
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -0,0 +1,1712 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+/ {
+	model = "NVIDIA Tegra210 P2597 I/O board";
+	compatible = "nvidia,p2597", "nvidia,tegra210";
+
+	aliases {
+		ethernet = "/usb@70090000/ethernet@1";
+	};
+
+	host1x@50000000 {
+		dpaux@54040000 {
+			status = "okay";
+		};
+
+		vi@54080000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+
+			csi@838 {
+				status = "okay";
+			};
+		};
+
+		sor@54580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+					   GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "touch";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		exp1: gpio@74 {
+			compatible = "ti,tca9539";
+			reg = <0x74>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		exp2: gpio@77 {
+			compatible = "ti,tca9539";
+			reg = <0x77>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	sata@70020000 {
+		status = "okay";
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
+	};
+
+	hda@70030000 {
+		nvidia,model = "NVIDIA Jetson TX1 HDA";
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-3}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-5}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3", "usb3-0",
+			    "usb3-1";
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		hvddio-pex-supply = <&vdd_1v8>;
+		avdd-usb-supply = <&vdd_3v3_sys>;
+
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet@1 {
+			compatible = "usb955,9ff";
+			reg = <1>;
+		};
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vdd_1v8>;
+		avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-3 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "pcie-x1";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-5 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+
+			sata {
+				status = "okay";
+
+				lanes {
+					sata-0 {
+						nvidia,function = "sata";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&vdd_usb_vbus_otg>;
+				usb-role-switch;
+				mode = "otg";
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio TEGRA_GPIO(Z, 0)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				vbus-supply = <&vdd_5v0_rtl>;
+				mode = "host";
+			};
+
+			usb2-2 {
+				status = "okay";
+				vbus-supply = <&vdd_usb_vbus>;
+				mode = "host";
+			};
+
+			usb2-3 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <1>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	/* MMC/SD */
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+
+		vqmmc-supply = <&vddio_sdmmc>;
+		vmmc-supply = <&vdd_3v3_sd>;
+	};
+
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	vdd_sys_mux: regulator-vdd-sys-mux {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS_MUX";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+
+		regulator-enable-ramp-delay = <160>;
+	};
+
+	vdd_5v0_io: regulator-vdd-5v0-io {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_IO_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+
+		regulator-enable-ramp-delay = <472>;
+	};
+
+	vdd_dsi_csi: regulator-vdd-dsi-csi {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD_DSI_CSI_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sys_1v2>;
+	};
+
+	vdd_3v3_dis: regulator-vdd-3v3-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_DIS_3V3_LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_1v8_dis: regulator-vdd-1v8-dis {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_1V8_DIS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+	};
+
+	vdd_5v0_rtl: regulator-vdd-5v0-rtl {
+		compatible = "regulator-fixed";
+		regulator-name = "RTL_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb_vbus: regulator-vdd-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_cam_1v2: regulator-vdd-cam-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&exp2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_2v8: regulator-vdd-cam-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&exp1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_1v8: regulator-vdd-cam-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&exp2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_usb_vbus_otg: regulator-vdd-usb-vbus-otg {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dts
new file mode 100644
index 000000000..7ffb351b5
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894-0050-a08.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra210-p2894.dtsi"
+
+/ {
+	model = "NVIDIA Shield TV";
+	compatible = "nvidia,p2894-0050-a08", "nvidia,darcy", "nvidia,tegra210";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
new file mode 100644
index 000000000..bbd6ff056
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -0,0 +1,1834 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include "tegra210.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	pinmux: pinmux@700008d4 {
+		status = "okay";
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fps0 {
+					reg = <0>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					reg = <1>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+				};
+
+				fps2 {
+					reg = <2>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			hog-0 {
+				gpio-hog;
+				output-high;
+				gpios = <2 GPIO_ACTIVE_HIGH>,
+					<7 GPIO_ACTIVE_HIGH>;
+			};
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <7>;
+					maxim,active-fps-power-down-slot = <0>;
+				};
+
+				gpio2 {
+					pins = "gpio2";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&max77620_sd2>;
+				in-ldo7-8-supply = <&max77620_sd2>;
+
+				max77620_sd0: sd0 {
+					regulator-name = "vdd-core";
+					regulator-enable-ramp-delay = <146>;
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+
+				max77620_sd1: sd1 {
+					regulator-name = "vddio-ddr";
+					regulator-enable-ramp-delay = <130>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				max77620_sd2: sd2 {
+					regulator-name = "vdd-pre-reg";
+					regulator-enable-ramp-delay = <176>;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,suspend-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_sd3: sd3 {
+					regulator-name = "vdd-1v8";
+					regulator-enable-ramp-delay = <242>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <27500>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				max77620_ldo0: ldo0 {
+					regulator-name = "avdd-sys";
+					regulator-enable-ramp-delay = <26>;
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo1: ldo1 {
+					regulator-name = "vdd-pex";
+					regulator-enable-ramp-delay = <22>;
+					regulator-min-microvolt = <1075000>;
+					regulator-max-microvolt = <1075000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo2: ldo2 {
+					regulator-name = "vddio-sdmmc3";
+					regulator-enable-ramp-delay = <62>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo3: ldo3 {
+					regulator-name = "vdd-3v3-eth";
+					regulator-enable-ramp-delay = <50>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo4: ldo4 {
+					regulator-name = "vdd-rtc";
+					regulator-enable-ramp-delay = <22>;
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				max77620_ldo5: ldo5 {
+					regulator-name = "avdd-ts-hv";
+					regulator-enable-ramp-delay = <62>;
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-ramp-delay = <100000>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo6: ldo6 {
+					regulator-name = "vdd-ts";
+					regulator-enable-ramp-delay = <36>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo7: ldo7 {
+					regulator-name = "vdd-gen-pll-edp";
+					regulator-enable-ramp-delay = <24>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,suspend-fps-source = <MAX77620_FPS_SRC_NONE>;
+				};
+
+				max77620_ldo8: ldo8 {
+					regulator-name = "vdd-hdmi-dp";
+					regulator-enable-ramp-delay = <22>;
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+				};
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <4587 3876>;
+		nvidia,core-pwr-off-time = <39065>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		status = "okay";
+	};
+
+	mmc@700b0600 {
+		bus-width = <8>;
+		non-removable;
+		status = "okay";
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-power {
+			debounce-interval = <30>;
+			gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	battery_reg: regulator-vdd-ac-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ac-bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3";
+		regulator-enable-ramp-delay = <160>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	max77620_gpio7: regulator-max77620-gpio7 {
+		compatible = "regulator-fixed";
+		regulator-name = "max77620-gpio7";
+		regulator-enable-ramp-delay = <240>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&max77620_ldo0>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_bl_en: regulator-lcd-bl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-bl-en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	en_vdd_sd: regulator-vdd-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-sd";
+		regulator-enable-ramp-delay = <472>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
+
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	en_vdd_cam: regulator-vdd-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_sys_boost: regulator-vdd-sys-boost {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys-boost";
+		regulator-enable-ramp-delay = <3090>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-hdmi";
+		regulator-enable-ramp-delay = <468>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_sys_boost>;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	en_vdd_cpu_fixed: regulator-vdd-cpu-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-fixed";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vdd_aux_3v3: regulator-vdd-aux-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "aux-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_snsr_pm: regulator-vdd-snsr-pm {
+		compatible = "regulator-fixed";
+		regulator-name = "snsr_pm";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-active-high;
+	};
+
+	vdd_usb_5v0: regulator-vdd-usb-5v0 {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd-usb-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_3v3>;
+
+		enable-active-high;
+	};
+
+	vdd_cdc_1v2_aud: regulator-vdd-cdc-1v2-aud {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd_cdc_1v2_aud";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		startup-delay-us = <250000>;
+
+		enable-active-high;
+	};
+
+	vdd_disp_3v0: regulator-vdd-disp-3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-disp-3v0";
+		regulator-enable-ramp-delay = <232>;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+
+		gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_fan: regulator-vdd-fan {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-fan";
+		regulator-enable-ramp-delay = <284>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_vbus1: regulator-usb-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	usb_vbus2: regulator-usb-vbus2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vdd_3v3_eth: regulator-vdd-3v3-eth {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3-eth-a02";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
new file mode 100644
index 000000000..c56824d7f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -0,0 +1,1991 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/mfd/max77620.h>
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Nano Developer Kit";
+	compatible = "nvidia,p3450-0000", "nvidia,tegra210";
+
+	aliases {
+		ethernet = "/pcie@1003000/pci@2,0/ethernet@0,0";
+		rtc0 = "/i2c@7000d000/pmic@3c";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	pcie@1003000 {
+		status = "okay";
+
+		hvddio-pex-supply = <&vdd_1v8>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		vddio-pex-ctl-supply = <&vdd_1v8>;
+
+		pci@1,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>,
+			       <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+			phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+			nvidia,num-lanes = <4>;
+			status = "okay";
+		};
+
+		pci@2,0 {
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
+			phy-names = "pcie-0";
+			status = "okay";
+
+			ethernet@0,0 {
+				reg = <0x000000 0 0 0 0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+	};
+
+	host1x@50000000 {
+		dpaux@54040000 {
+			status = "okay";
+		};
+
+		vi@54080000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_sys_1v2>;
+
+			csi@838 {
+				status = "okay";
+			};
+		};
+
+		sor@54540000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&avdd_io_edp_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+
+			nvidia,xbar-cfg = <2 1 0 3 4>;
+			nvidia,dpaux = <&dpaux>;
+		};
+
+		sor@54580000 {
+			status = "okay";
+
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+			hdmi-supply = <&vdd_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1)
+					   GPIO_ACTIVE_LOW>;
+			nvidia,xbar-cfg = <0 1 2 3 4>;
+		};
+
+		dpaux@545c0000 {
+			status = "okay";
+		};
+
+		i2c@546c0000 {
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&vdd_gpu>;
+		status = "okay";
+	};
+
+	pinmux@700008d4 {
+		dvfs_pwm_active_state: pinmux-dvfs-pwm-active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: pinmux-dvfs-pwm-inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	/* debug port */
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+
+			label = "module";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+
+		eeprom@57 {
+			compatible = "atmel,24c02";
+			reg = <0x57>;
+
+			label = "system";
+			vcc-supply = <&vdd_1v8>;
+			address-width = <8>;
+			pagesize = <8>;
+			size = <256>;
+			read-only;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupt-parent = <&tegra_pmc>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+					maxim,suspend-fps-time-period-us = <5120>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,suspend-fps-time-period-us = <5120>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "fps-out";
+					drive-push-pull = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				gpio2 {
+					pins = "gpio2";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <4>;
+					maxim,active-fps-power-down-slot = <3>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6_7 {
+					pins = "gpio5", "gpio6", "gpio7";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&vdd_pre>;
+				in-ldo2-supply = <&vdd_3v3_sys>;
+				in-ldo3-5-supply = <&vdd_1v8>;
+				in-ldo4-6-supply = <&vdd_5v0_sys>;
+				in-ldo7-8-supply = <&vdd_pre>;
+				in-sd0-supply = <&vdd_5v0_sys>;
+				in-sd1-supply = <&vdd_5v0_sys>;
+				in-sd2-supply = <&vdd_5v0_sys>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+
+				vdd_soc: sd0 {
+					regulator-name = "VDD_SOC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1170000>;
+					regulator-enable-ramp-delay = <146>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <300>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <6>;
+				};
+
+				vdd_ddr: sd1 {
+					regulator-name = "VDD_DDR_1V1_PMIC";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <300>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <5>;
+					maxim,active-fps-power-down-slot = <2>;
+				};
+
+				vdd_pre: sd2 {
+					regulator-name = "VDD_PRE_REG_1V35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-enable-ramp-delay = <176>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <350>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <2>;
+					maxim,active-fps-power-down-slot = <5>;
+				};
+
+				vdd_1v8: sd3 {
+					regulator-name = "VDD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <242>;
+					regulator-ramp-delay = <27500>;
+					regulator-ramp-delay-scale = <360>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				vdd_sys_1v2: ldo0 {
+					regulator-name = "AVDD_SYS_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				vdd_pex_1v05: ldo1 {
+					regulator-name = "VDD_PEX_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				vddio_sdmmc: ldo2 {
+					regulator-name = "VDDIO_SDMMC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				ldo3 {
+					status = "disabled";
+				};
+
+				vdd_rtc: ldo4 {
+					regulator-name = "VDD_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+					regulator-disable-active-discharge;
+					regulator-always-on;
+					regulator-boot-on;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <6>;
+				};
+
+				ldo5 {
+					status = "disabled";
+				};
+
+				ldo6 {
+					status = "disabled";
+				};
+
+				avdd_1v05_pll: ldo7 {
+					regulator-name = "AVDD_1V05_PLL";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				avdd_1v05: ldo8 {
+					regulator-name = "AVDD_SATA_HDMI_DP_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-ramp-delay-scale = <200>;
+
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <6>;
+					maxim,active-fps-power-down-slot = <1>;
+				};
+			};
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <4587 3876>;
+		nvidia,core-pwr-off-time = <39065>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@70030000 {
+		nvidia,model = "NVIDIA Jetson Nano HDA";
+
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>,
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
+
+		avdd-usb-supply = <&vdd_3v3_sys>;
+		dvddio-pex-supply = <&vdd_pex_1v05>;
+		hvddio-pex-supply = <&vdd_1v8>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&vdd_1v8>;
+		avdd-pll-uerefe-supply = <&vdd_pex_1v05>;
+		dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+		hvdd-pex-pll-e-supply = <&vdd_1v8>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					micro_b: usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "pcie-x1";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-2 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-3 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-4 {
+						nvidia,function = "pcie-x4";
+						status = "okay";
+					};
+
+					pcie-5 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "peripheral";
+				usb-role-switch;
+
+				vbus-supply = <&vdd_5v0_usb>;
+
+				connector {
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
+					label = "micro-USB";
+					type = "micro";
+					vbus-gpios = <&gpio TEGRA_GPIO(CC, 4)
+						      GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+			};
+
+			usb3-0 {
+				status = "okay";
+				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_hub_3v3>;
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		status = "okay";
+		bus-width = <4>;
+
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+		disable-wp;
+
+		vqmmc-supply = <&vddio_sdmmc>;
+		vmmc-supply = <&vdd_3v3_sd>;
+	};
+
+	mmc@700b0400 {
+		status = "okay";
+		bus-width = <4>;
+
+		vqmmc-supply = <&vdd_1v8>;
+		vmmc-supply = <&vdd_3v3_sys>;
+
+		non-removable;
+		cap-sdio-irq;
+		keep-power-in-suspend;
+		wakeup-source;
+	};
+
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
+	clock@70110000 {
+		status = "okay";
+
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
+	aconnect@702c0000 {
+		status = "okay";
+
+		ahub@702d0800 {
+			status = "okay";
+
+			admaif@702d0000 {
+				status = "okay";
+			};
+
+			i2s@702d1200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s3_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s3_ep>;
+						};
+					};
+
+					i2s3_port: port@1 {
+						reg = <1>;
+
+						i2s3_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			i2s@702d1300 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						i2s4_cif_ep: endpoint {
+							remote-endpoint = <&xbar_i2s4_ep>;
+						};
+					};
+
+					i2s4_port: port@1 {
+						reg = <1>;
+
+						i2s4_dap_ep: endpoint {
+							dai-format = "i2s";
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			sfc@702d2000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_in_ep>;
+						};
+					};
+
+					sfc1_out_port: port@1 {
+						reg = <1>;
+
+						sfc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_in_ep>;
+						};
+					};
+
+					sfc2_out_port: port@1 {
+						reg = <1>;
+
+						sfc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc3_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_in_ep>;
+						};
+					};
+
+					sfc3_out_port: port@1 {
+						reg = <1>;
+
+						sfc3_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc3_out_ep>;
+						};
+					};
+				};
+			};
+
+			sfc@702d2600 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						sfc4_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_in_ep>;
+						};
+					};
+
+					sfc4_out_port: port@1 {
+						reg = <1>;
+
+						sfc4_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_sfc4_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx1_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx1_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+
+						amx1_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <3>;
+
+						amx1_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_in4_ep>;
+						};
+					};
+
+					amx1_out_port: port@4 {
+						reg = <4>;
+
+						amx1_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx1_out_ep>;
+						};
+					};
+				};
+			};
+
+			amx@702d3100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						amx2_in1_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						amx2_in2_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in2_ep>;
+						};
+					};
+
+					amx2_in3_port: port@2 {
+						reg = <2>;
+
+						amx2_in3_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in3_ep>;
+						};
+					};
+
+					amx2_in4_port: port@3 {
+						reg = <3>;
+
+						amx2_in4_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_in4_ep>;
+						};
+					};
+
+					amx2_out_port: port@4 {
+						reg = <4>;
+
+						amx2_out_ep: endpoint {
+							remote-endpoint = <&xbar_amx2_out_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx1_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_in_ep>;
+						};
+					};
+
+					adx1_out1_port: port@1 {
+						reg = <1>;
+
+						adx1_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out1_ep>;
+						};
+					};
+
+					adx1_out2_port: port@2 {
+						reg = <2>;
+
+						adx1_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out2_ep>;
+						};
+					};
+
+					adx1_out3_port: port@3 {
+						reg = <3>;
+
+						adx1_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out3_ep>;
+						};
+					};
+
+					adx1_out4_port: port@4 {
+						reg = <4>;
+
+						adx1_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx1_out4_ep>;
+						};
+					};
+				};
+			};
+
+			adx@702d3900 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						adx2_in_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_in_ep>;
+						};
+					};
+
+					adx2_out1_port: port@1 {
+						reg = <1>;
+
+						adx2_out1_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out1_ep>;
+						};
+					};
+
+					adx2_out2_port: port@2 {
+						reg = <2>;
+
+						adx2_out2_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out2_ep>;
+						};
+					};
+
+					adx2_out3_port: port@3 {
+						reg = <3>;
+
+						adx2_out3_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out3_ep>;
+						};
+					};
+
+					adx2_out4_port: port@4 {
+						reg = <4>;
+
+						adx2_out4_ep: endpoint {
+							remote-endpoint = <&xbar_adx2_out4_ep>;
+						};
+					};
+				};
+			};
+
+			dmic@702d4000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic1_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic1_ep>;
+						};
+					};
+
+					dmic1_port: port@1 {
+						reg = <1>;
+
+						dmic1_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			dmic@702d4100 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dmic2_cif_ep: endpoint {
+							remote-endpoint = <&xbar_dmic2_ep>;
+						};
+					};
+
+					dmic2_port: port@1 {
+						reg = <1>;
+
+						dmic2_dap_ep: endpoint {
+							/* Placeholder for external Codec */
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_in_ep>;
+						};
+					};
+
+					ope1_out_port: port@1 {
+						reg = <0x1>;
+
+						ope1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope1_out_ep>;
+						};
+					};
+				};
+			};
+
+			processing-engine@702d8400 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						ope2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_in_ep>;
+						};
+					};
+
+					ope2_out_port: port@1 {
+						reg = <0x1>;
+
+						ope2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_ope2_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da000 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc1_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_in_ep>;
+						};
+					};
+
+					mvc1_out_port: port@1 {
+						reg = <1>;
+
+						mvc1_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc1_out_ep>;
+						};
+					};
+				};
+			};
+
+			mvc@702da200 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mvc2_cif_in_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_in_ep>;
+						};
+					};
+
+					mvc2_out_port: port@1 {
+						reg = <1>;
+
+						mvc2_cif_out_ep: endpoint {
+							remote-endpoint = <&xbar_mvc2_out_ep>;
+						};
+					};
+				};
+			};
+
+			amixer@702dbb00 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						mixer_in1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in1_ep>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						mixer_in2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in2_ep>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						mixer_in3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in3_ep>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						mixer_in4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in4_ep>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						mixer_in5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in5_ep>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						mixer_in6_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in6_ep>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						mixer_in7_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in7_ep>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						mixer_in8_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in8_ep>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						mixer_in9_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in9_ep>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						mixer_in10_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_in10_ep>;
+						};
+					};
+
+					mixer_out1_port: port@a {
+						reg = <0xa>;
+
+						mixer_out1_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out1_ep>;
+						};
+					};
+
+					mixer_out2_port: port@b {
+						reg = <0xb>;
+
+						mixer_out2_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out2_ep>;
+						};
+					};
+
+					mixer_out3_port: port@c {
+						reg = <0xc>;
+
+						mixer_out3_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out3_ep>;
+						};
+					};
+
+					mixer_out4_port: port@d {
+						reg = <0xd>;
+
+						mixer_out4_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out4_ep>;
+						};
+					};
+
+					mixer_out5_port: port@e {
+						reg = <0xe>;
+
+						mixer_out5_ep: endpoint {
+							remote-endpoint = <&xbar_mixer_out5_ep>;
+						};
+					};
+				};
+			};
+
+			ports {
+				xbar_i2s3_port: port@c {
+					reg = <0xc>;
+
+					xbar_i2s3_ep: endpoint {
+						remote-endpoint = <&i2s3_cif_ep>;
+					};
+				};
+
+				xbar_i2s4_port: port@d {
+					reg = <0xd>;
+
+					xbar_i2s4_ep: endpoint {
+						remote-endpoint = <&i2s4_cif_ep>;
+					};
+				};
+
+				xbar_dmic1_port: port@f {
+					reg = <0xf>;
+
+					xbar_dmic1_ep: endpoint {
+						remote-endpoint = <&dmic1_cif_ep>;
+					};
+				};
+
+				xbar_dmic2_port: port@10 {
+					reg = <0x10>;
+
+					xbar_dmic2_ep: endpoint {
+						remote-endpoint = <&dmic2_cif_ep>;
+					};
+				};
+
+				xbar_sfc1_in_port: port@12 {
+					reg = <0x12>;
+
+					xbar_sfc1_in_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_in_ep>;
+					};
+				};
+
+				port@13 {
+					reg = <0x13>;
+
+					xbar_sfc1_out_ep: endpoint {
+						remote-endpoint = <&sfc1_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc2_in_port: port@14 {
+					reg = <0x14>;
+
+					xbar_sfc2_in_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_in_ep>;
+					};
+				};
+
+				port@15 {
+					reg = <0x15>;
+
+					xbar_sfc2_out_ep: endpoint {
+						remote-endpoint = <&sfc2_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc3_in_port: port@16 {
+					reg = <0x16>;
+
+					xbar_sfc3_in_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_in_ep>;
+					};
+				};
+
+				port@17 {
+					reg = <0x17>;
+
+					xbar_sfc3_out_ep: endpoint {
+						remote-endpoint = <&sfc3_cif_out_ep>;
+					};
+				};
+
+				xbar_sfc4_in_port: port@18 {
+					reg = <0x18>;
+
+					xbar_sfc4_in_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_in_ep>;
+					};
+				};
+
+				port@19 {
+					reg = <0x19>;
+
+					xbar_sfc4_out_ep: endpoint {
+						remote-endpoint = <&sfc4_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc1_in_port: port@1a {
+					reg = <0x1a>;
+
+					xbar_mvc1_in_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_in_ep>;
+					};
+				};
+
+				port@1b {
+					reg = <0x1b>;
+
+					xbar_mvc1_out_ep: endpoint {
+						remote-endpoint = <&mvc1_cif_out_ep>;
+					};
+				};
+
+				xbar_mvc2_in_port: port@1c {
+					reg = <0x1c>;
+
+					xbar_mvc2_in_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_in_ep>;
+					};
+				};
+
+				port@1d {
+					reg = <0x1d>;
+
+					xbar_mvc2_out_ep: endpoint {
+						remote-endpoint = <&mvc2_cif_out_ep>;
+					};
+				};
+
+				xbar_amx1_in1_port: port@1e {
+					reg = <0x1e>;
+
+					xbar_amx1_in1_ep: endpoint {
+						remote-endpoint = <&amx1_in1_ep>;
+					};
+				};
+
+				xbar_amx1_in2_port: port@1f {
+					reg = <0x1f>;
+
+					xbar_amx1_in2_ep: endpoint {
+						remote-endpoint = <&amx1_in2_ep>;
+					};
+				};
+
+				xbar_amx1_in3_port: port@20 {
+					reg = <0x20>;
+
+					xbar_amx1_in3_ep: endpoint {
+						remote-endpoint = <&amx1_in3_ep>;
+					};
+				};
+
+				xbar_amx1_in4_port: port@21 {
+					reg = <0x21>;
+
+					xbar_amx1_in4_ep: endpoint {
+						remote-endpoint = <&amx1_in4_ep>;
+					};
+				};
+
+				port@22 {
+					reg = <0x22>;
+
+					xbar_amx1_out_ep: endpoint {
+						remote-endpoint = <&amx1_out_ep>;
+					};
+				};
+
+				xbar_amx2_in1_port: port@23 {
+					reg = <0x23>;
+
+					xbar_amx2_in1_ep: endpoint {
+						remote-endpoint = <&amx2_in1_ep>;
+					};
+				};
+
+				xbar_amx2_in2_port: port@24 {
+					reg = <0x24>;
+
+					xbar_amx2_in2_ep: endpoint {
+						remote-endpoint = <&amx2_in2_ep>;
+					};
+				};
+
+				xbar_amx2_in3_port: port@25 {
+					reg = <0x25>;
+
+					xbar_amx2_in3_ep: endpoint {
+						remote-endpoint = <&amx2_in3_ep>;
+					};
+				};
+
+				xbar_amx2_in4_port: port@26 {
+					reg = <0x26>;
+
+					xbar_amx2_in4_ep: endpoint {
+						remote-endpoint = <&amx2_in4_ep>;
+					};
+				};
+
+				port@27 {
+					reg = <0x27>;
+
+					xbar_amx2_out_ep: endpoint {
+						remote-endpoint = <&amx2_out_ep>;
+					};
+				};
+
+				xbar_adx1_in_port: port@28 {
+					reg = <0x28>;
+
+					xbar_adx1_in_ep: endpoint {
+						remote-endpoint = <&adx1_in_ep>;
+					};
+				};
+
+				port@29 {
+					reg = <0x29>;
+
+					xbar_adx1_out1_ep: endpoint {
+						remote-endpoint = <&adx1_out1_ep>;
+					};
+				};
+
+				port@2a {
+					reg = <0x2a>;
+
+					xbar_adx1_out2_ep: endpoint {
+						remote-endpoint = <&adx1_out2_ep>;
+					};
+				};
+
+				port@2b {
+					reg = <0x2b>;
+
+					xbar_adx1_out3_ep: endpoint {
+						remote-endpoint = <&adx1_out3_ep>;
+					};
+				};
+
+				port@2c {
+					reg = <0x2c>;
+
+					xbar_adx1_out4_ep: endpoint {
+						remote-endpoint = <&adx1_out4_ep>;
+					};
+				};
+
+				xbar_adx2_in_port: port@2d {
+					reg = <0x2d>;
+
+					xbar_adx2_in_ep: endpoint {
+						remote-endpoint = <&adx2_in_ep>;
+					};
+				};
+
+				port@2e {
+					reg = <0x2e>;
+
+					xbar_adx2_out1_ep: endpoint {
+						remote-endpoint = <&adx2_out1_ep>;
+					};
+				};
+
+				port@2f {
+					reg = <0x2f>;
+
+					xbar_adx2_out2_ep: endpoint {
+						remote-endpoint = <&adx2_out2_ep>;
+					};
+				};
+
+				port@30 {
+					reg = <0x30>;
+
+					xbar_adx2_out3_ep: endpoint {
+						remote-endpoint = <&adx2_out3_ep>;
+					};
+				};
+
+				port@31 {
+					reg = <0x31>;
+
+					xbar_adx2_out4_ep: endpoint {
+						remote-endpoint = <&adx2_out4_ep>;
+					};
+				};
+
+				xbar_mixer_in1_port: port@32 {
+					reg = <0x32>;
+
+					xbar_mixer_in1_ep: endpoint {
+						remote-endpoint = <&mixer_in1_ep>;
+					};
+				};
+
+				xbar_mixer_in2_port: port@33 {
+					reg = <0x33>;
+
+					xbar_mixer_in2_ep: endpoint {
+						remote-endpoint = <&mixer_in2_ep>;
+					};
+				};
+
+				xbar_mixer_in3_port: port@34 {
+					reg = <0x34>;
+
+					xbar_mixer_in3_ep: endpoint {
+						remote-endpoint = <&mixer_in3_ep>;
+					};
+				};
+
+				xbar_mixer_in4_port: port@35 {
+					reg = <0x35>;
+
+					xbar_mixer_in4_ep: endpoint {
+						remote-endpoint = <&mixer_in4_ep>;
+					};
+				};
+
+				xbar_mixer_in5_port: port@36 {
+					reg = <0x36>;
+
+					xbar_mixer_in5_ep: endpoint {
+						remote-endpoint = <&mixer_in5_ep>;
+					};
+				};
+
+				xbar_mixer_in6_port: port@37 {
+					reg = <0x37>;
+
+					xbar_mixer_in6_ep: endpoint {
+						remote-endpoint = <&mixer_in6_ep>;
+					};
+				};
+
+				xbar_mixer_in7_port: port@38 {
+					reg = <0x38>;
+
+					xbar_mixer_in7_ep: endpoint {
+						remote-endpoint = <&mixer_in7_ep>;
+					};
+				};
+
+				xbar_mixer_in8_port: port@39 {
+					reg = <0x39>;
+
+					xbar_mixer_in8_ep: endpoint {
+						remote-endpoint = <&mixer_in8_ep>;
+					};
+				};
+
+				xbar_mixer_in9_port: port@3a {
+					reg = <0x3a>;
+
+					xbar_mixer_in9_ep: endpoint {
+						remote-endpoint = <&mixer_in9_ep>;
+					};
+				};
+
+				xbar_mixer_in10_port: port@3b {
+					reg = <0x3b>;
+
+					xbar_mixer_in10_ep: endpoint {
+						remote-endpoint = <&mixer_in10_ep>;
+					};
+				};
+
+				port@3c {
+					reg = <0x3c>;
+
+					xbar_mixer_out1_ep: endpoint {
+						remote-endpoint = <&mixer_out1_ep>;
+					};
+				};
+
+				port@3d {
+					reg = <0x3d>;
+
+					xbar_mixer_out2_ep: endpoint {
+						remote-endpoint = <&mixer_out2_ep>;
+					};
+				};
+
+				port@3e {
+					reg = <0x3e>;
+
+					xbar_mixer_out3_ep: endpoint {
+						remote-endpoint = <&mixer_out3_ep>;
+					};
+				};
+
+				port@3f {
+					reg = <0x3f>;
+
+					xbar_mixer_out4_ep: endpoint {
+						remote-endpoint = <&mixer_out4_ep>;
+					};
+				};
+
+				port@40 {
+					reg = <0x40>;
+
+					xbar_mixer_out5_ep: endpoint {
+						remote-endpoint = <&mixer_out5_ep>;
+					};
+				};
+
+				xbar_ope1_in_port: port@41 {
+					reg = <0x41>;
+
+					xbar_ope1_in_ep: endpoint {
+						remote-endpoint = <&ope1_cif_in_ep>;
+					};
+				};
+
+				port@42 {
+					reg = <0x42>;
+
+					xbar_ope1_out_ep: endpoint {
+						remote-endpoint = <&ope1_cif_out_ep>;
+					};
+				};
+
+				xbar_ope2_in_port: port@43 {
+					reg = <0x43>;
+
+					xbar_ope2_in_ep: endpoint {
+						remote-endpoint = <&ope2_cif_in_ep>;
+					};
+				};
+
+				port@44 {
+					reg = <0x44>;
+
+					xbar_ope2_out_ep: endpoint {
+						remote-endpoint = <&ope2_cif_out_ep>;
+					};
+				};
+			};
+		};
+
+		dma-controller@702e2000 {
+			status = "okay";
+		};
+
+		interrupt-controller@702f9000 {
+			status = "okay";
+		};
+	};
+
+	spi@70410000 {
+		status = "okay";
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <104000000>;
+			spi-tx-bus-width = <2>;
+			spi-rx-bus-width = <2>;
+		};
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+			debounce-interval = <30>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 3 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <240>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_sd: regulator-vdd-3v3-sd {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_hdmi: regulator-vdd-hdmi-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hub_3v3: regulator-vdd-hub-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_HUB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_cpu: regulator-vdd-cpu {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_CPU";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 8000>;
+
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
+
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	avdd_io_edp_1v05: regulator-avdd-io-epd-1v05 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "AVDD_IO_EDP_1V05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&avdd_1v05_pll>;
+	};
+
+	vdd_5v0_usb: regulator-vdd-5v-usb {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDD_5V_USB";
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra210-audio-graph-card";
+		status = "okay";
+
+		dais = /* FE */
+		       <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>,
+		       <&admaif7_port>, <&admaif8_port>, <&admaif9_port>,
+		       <&admaif10_port>,
+		       /* Router */
+		       <&xbar_i2s3_port>, <&xbar_i2s4_port>,
+		       <&xbar_dmic1_port>, <&xbar_dmic2_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_mixer_in1_port>, <&xbar_mixer_in2_port>,
+		       <&xbar_mixer_in3_port>, <&xbar_mixer_in4_port>,
+		       <&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
+		       <&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
+		       <&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+		       <&xbar_ope1_in_port>, <&xbar_ope2_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&mixer_out1_port>, <&mixer_out2_port>,
+		       <&mixer_out3_port>, <&mixer_out4_port>,
+		       <&mixer_out5_port>,
+		       <&ope1_out_port>, <&ope2_out_port>,
+		       /* I/O DAP Ports */
+		       <&i2s3_port>, <&i2s4_port>,
+		       <&dmic1_port>, <&dmic2_port>;
+
+		label = "NVIDIA Jetson Nano APE";
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
new file mode 100644
index 000000000..53805555d
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -0,0 +1,1935 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+#include "tegra210.dtsi"
+
+/ {
+	model = "Google Pixel C";
+	compatible = "google,smaug-rev8", "google,smaug-rev7",
+		     "google,smaug-rev6", "google,smaug-rev5",
+		     "google,smaug-rev4", "google,smaug-rev3",
+		     "google,smaug-rev2", "google,smaug-rev1",
+		     "google,smaug", "nvidia,tegra210";
+
+	aliases {
+		serial0 = &uarta;
+		serial3 = &uartd;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	host1x@50000000 {
+		dpaux: dpaux@545c0000 {
+			status = "okay";
+		};
+	};
+
+	gpu@57000000 {
+		vdd-supply = <&max77621_gpu>;
+		status = "okay";
+	};
+
+	pinmux: pinmux@700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "touch";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "qspi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		bluetooth {
+			compatible = "brcm,bcm43540-bt";
+			max-speed = <4000000>;
+			brcm,bt-pcm-int-params = [01 02 00 01 01];
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 5) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-names = "host-wakeup";
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		ec@1e {
+			compatible = "google,cros-ec-i2c";
+			reg = <0x1e>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 1) IRQ_TYPE_LEVEL_LOW>;
+			wakeup-source;
+
+			ec_i2c_0: i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				battery: bq27742@55 {
+					compatible = "ti,bq27742";
+					reg = <0x55>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <1000000>;
+
+		max77621_cpu: max77621@1b {
+			compatible = "maxim,max77621";
+			reg = <0x1b>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Y, 1) IRQ_TYPE_LEVEL_LOW>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1231250>;
+			regulator-name = "PPVAR_CPU";
+			regulator-ramp-delay = <12500>;
+			maxim,dvs-default-state = <1>;
+			maxim,enable-active-discharge;
+			maxim,enable-bias-control;
+			maxim,enable-gpio = <&pmic 5 0>;
+			maxim,externally-enable;
+		};
+
+		max77621_gpu: regulator@1c {
+			compatible = "maxim,max77621";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(A, 6) IRQ_TYPE_LEVEL_LOW>;
+			regulator-min-microvolt = <840000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-name = "PPVAR_GPU";
+			regulator-ramp-delay = <12500>;
+			maxim,dvs-default-state = <1>;
+			maxim,enable-active-discharge;
+			maxim,enable-bias-control;
+			maxim,enable-gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			maxim,externally-enable;
+		};
+
+		pmic: pmic@3c {
+			compatible = "maxim,max77620";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			fps {
+				fps0 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,shutdown-fps-time-period-us = <5120>;
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+					maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			max77620_default: pinmux {
+				gpio0_1_2_7 {
+					pins = "gpio0", "gpio1", "gpio2", "gpio7";
+					function = "gpio";
+				};
+
+				/*
+				 * GPIO3 is used to en_pp3300, and it is part of power
+				 * sequence, So it must be sequenced up (automatically
+				 * set by OTP) and down properly.
+				 */
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <4>;
+					maxim,active-fps-power-down-slot = <2>;
+				};
+
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+
+				gpio5_6 {
+					pins = "gpio5", "gpio6";
+					function = "gpio";
+					drive-push-pull = <1>;
+				};
+			};
+
+			regulators {
+				in-ldo0-1-supply = <&pp1350>;
+				in-ldo2-supply = <&pp3300>;
+				in-ldo3-5-supply = <&pp3300>;
+				in-ldo7-8-supply = <&pp1350>;
+
+				ppvar_soc: sd0 {
+					regulator-name = "PPVAR_SOC";
+					regulator-min-microvolt = <825000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1100_sd1: sd1 {
+					regulator-name = "PP1100";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <5>;
+					maxim,active-fps-power-down-slot = <1>;
+				};
+
+				pp1350: sd2 {
+					regulator-name = "PP1350";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <2>;
+					maxim,active-fps-power-down-slot = <5>;
+				};
+
+				pp1800: sd3 {
+					regulator-name = "PP1800";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <3>;
+				};
+
+				pp1200_avdd: ldo0 {
+					regulator-name = "PP1200_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <26>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1200_rcam: ldo1 {
+					regulator-name = "PP1200_RCAM";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp_ldo2: ldo2 {
+					regulator-name = "PP_LDO2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <11000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_rcam: ldo3 {
+					regulator-name = "PP2800L_RCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <50>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp100_soc_rtc: ldo4 {
+					regulator-name = "PP1100_SOC_RTC";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on; /* Check this */
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+					maxim,active-fps-power-up-slot = <1>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp2800l_fcam: ldo5 {
+					regulator-name = "PP2800L_FCAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-enable-ramp-delay = <62>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				ldo6 {
+					/* Unused. */
+					regulator-name = "PP_LDO6";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-enable-ramp-delay = <36>;
+					regulator-ramp-delay = <100000>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+
+				pp1050_avdd: ldo7 {
+					regulator-name = "PP1050_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <24>;
+					regulator-ramp-delay = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+					maxim,active-fps-power-up-slot = <3>;
+					maxim,active-fps-power-down-slot = <4>;
+				};
+
+				avddio_1v05: ldo8 {
+					regulator-name = "AVDDIO_1V05";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-enable-ramp-delay = <22>;
+					regulator-ramp-delay = <100000>;
+					regulator-boot-on;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
+					maxim,active-fps-power-up-slot = <0>;
+					maxim,active-fps-power-down-slot = <7>;
+				};
+			};
+		};
+	};
+
+	i2c@7000d100 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		nau8825@1a {
+			compatible = "nuvoton,nau8825";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_OUT_2>;
+			clock-names = "mclk";
+
+			nuvoton,jkdet-enable;
+			nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+			nuvoton,vref-impedance = <2>;
+			nuvoton,micbias-voltage = <6>;
+			nuvoton,sar-threshold-num = <4>;
+			nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
+			nuvoton,sar-hysteresis = <1>;
+			nuvoton,sar-voltage = <0>;
+			nuvoton,sar-compare-time = <0>;
+			nuvoton,sar-sampling-time = <0>;
+			nuvoton,short-key-debounce = <2>;
+			nuvoton,jack-insert-debounce = <7>;
+			nuvoton,jack-eject-debounce = <7>;
+			status = "okay";
+		};
+
+		audio-codec@2d {
+			compatible = "realtek,rt5677";
+			reg = <0x2d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
+			realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "okay";
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <0>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <12000 6000>;
+		nvidia,core-pwr-off-time = <39053>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		status = "okay";
+	};
+
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
+	mmc@700b0200 {
+		power-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		non-removable;
+		vqmmc-supply = <&pp1800>;
+		vmmc-supply = <&pp3300>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		wifi@1 {
+			compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac";
+			reg = <1>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@700b0600 {
+		bus-width = <8>;
+		non-removable;
+		status = "okay";
+	};
+
+	clock@70110000 {
+		status = "okay";
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,i2c-fs-rate = <400000>;
+		nvidia,sample-rate = <12500>;
+		vdd-cpu-supply = <&max77621_cpu>;
+	};
+
+	aconnect@702c0000 {
+		status = "okay";
+
+		dma-controller@702e2000 {
+			status = "okay";
+		};
+
+		interrupt-controller@702f9000 {
+			status = "okay";
+		};
+	};
+
+	clk32k_in: clock-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu@0 {
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			enable-method = "psci";
+		};
+
+		idle-states {
+			cpu-sleep {
+				arm,psci-suspend-param = <0x00010007>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		switch-lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+
+		switch-tablet-mode {
+			label = "Tablet Mode";
+			gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			wakeup-source;
+		};
+	};
+
+	max98357a {
+		compatible = "maxim,max98357a";
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	ppvar_sys: regulator-ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "PPVAR_SYS";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		regulator-always-on;
+	};
+
+	pplcd_vdd: regulator-pplcd-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "PPLCD_VDD";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	pp3000_always: regulator-pp3000-always {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3000_ALWAYS";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
+
+	pp3300: regulator-pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	pp5000: regulator-pp5000 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	pp1800_lcdio: regulator-pp1800-lcdio {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_LCDIO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	pp1800_cam: regulator-pp1800-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_CAM";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+		enable-active-high;
+	};
+
+	usbc_vbus: regulator-usbc-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USBC_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
new file mode 100644
index 000000000..47f8268e4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -0,0 +1,2178 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/tegra210-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra210-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/reset/tegra210-car.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+#include <dt-bindings/soc/tegra-pmc.h>
+
+/ {
+	compatible = "nvidia,tegra210";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie@1003000 {
+		compatible = "nvidia,tegra210-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+			 <&tegra_car TEGRA210_CLK_AFI>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>,
+			 <&tegra_car TEGRA210_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&pex_dpd_disable>;
+		pinctrl-1 = <&pex_dpd_enable>;
+
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			bus-range = <0x00 0xff>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra210-host1x";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
+		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>, <&mc TEGRA210_MC_RESET_HC>;
+		reset-names = "host1x", "mc";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
+
+		iommus = <&mc TEGRA_SWGROUP_HC>;
+
+		dpaux1: dpaux@54040000 {
+			compatible = "nvidia,tegra210-dpaux";
+			reg = <0x0 0x54040000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX1>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 207>;
+			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+
+			state_dpaux1_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux1_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux1_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra210-vi";
+			reg = <0x0 0x54080000 0x0 0x700>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+			clocks = <&tegra_car TEGRA210_CLK_VI>;
+			power-domains = <&pd_venc>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0x0 0x0 0x54080000 0x2000>;
+
+			csi@838 {
+				compatible = "nvidia,tegra210-csi";
+				reg = <0x838 0x1300>;
+				status = "disabled";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+						  <&tegra_car TEGRA210_CLK_CILCD>,
+						  <&tegra_car TEGRA210_CLK_CILE>,
+						  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+							 <&tegra_car TEGRA210_CLK_PLL_P>,
+							 <&tegra_car TEGRA210_CLK_PLL_P>;
+				assigned-clock-rates = <102000000>,
+						       <102000000>,
+						       <102000000>,
+						       <972000000>;
+
+				clocks = <&tegra_car TEGRA210_CLK_CSI>,
+					 <&tegra_car TEGRA210_CLK_CILAB>,
+					 <&tegra_car TEGRA210_CLK_CILCD>,
+					 <&tegra_car TEGRA210_CLK_CILE>,
+					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
+				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+				power-domains = <&pd_sor>;
+			};
+		};
+
+		tsec@54100000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54100000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_TSEC>;
+			clock-names = "tsec";
+			resets = <&tegra_car 83>;
+			reset-names = "tsec";
+			status = "disabled";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP1>;
+			clock-names = "dc";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+			nvidia,head = <0>;
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP2>;
+			clock-names = "dc";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+			nvidia,head = <1>;
+		};
+
+		dsia: dsi@54300000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIA>,
+				 <&tegra_car TEGRA210_CLK_DSIALP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			power-domains = <&pd_sor>;
+			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		vic@54340000 {
+			compatible = "nvidia,tegra210-vic";
+			reg = <0x0 0x54340000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_VIC03>;
+			clock-names = "vic";
+			resets = <&tegra_car 178>;
+			reset-names = "vic";
+
+			iommus = <&mc TEGRA_SWGROUP_VIC>;
+			power-domains = <&pd_vic>;
+		};
+
+		nvjpg@54380000 {
+			compatible = "nvidia,tegra210-nvjpg";
+			reg = <0x0 0x54380000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		dsib: dsi@54400000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIB>,
+				 <&tegra_car TEGRA210_CLK_DSIBLP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			power-domains = <&pd_sor>;
+			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		nvdec@54480000 {
+			compatible = "nvidia,tegra210-nvdec";
+			reg = <0x0 0x54480000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		nvenc@544c0000 {
+			compatible = "nvidia,tegra210-nvenc";
+			reg = <0x0 0x544c0000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		tsec@54500000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54500000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_TSECB>;
+			clock-names = "tsec";
+			resets = <&tegra_car 206>;
+			reset-names = "tsec";
+			status = "disabled";
+		};
+
+		sor0: sor@54540000 {
+			compatible = "nvidia,tegra210-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+				 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux_aux>;
+			pinctrl-1 = <&state_dpaux_i2c>;
+			pinctrl-2 = <&state_dpaux_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+		};
+
+		sor1: sor@54580000 {
+			compatible = "nvidia,tegra210-sor1";
+			reg = <0x0 0x54580000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR1>,
+				 <&tegra_car TEGRA210_CLK_SOR1_OUT>,
+				 <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "out", "parent", "dp", "safe";
+			resets = <&tegra_car 183>;
+			reset-names = "sor";
+			pinctrl-0 = <&state_dpaux1_aux>;
+			pinctrl-1 = <&state_dpaux1_i2c>;
+			pinctrl-2 = <&state_dpaux1_off>;
+			pinctrl-names = "aux", "i2c", "off";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+		};
+
+		dpaux: dpaux@545c0000 {
+			compatible = "nvidia,tegra210-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			power-domains = <&pd_sor>;
+			status = "disabled";
+
+			state_dpaux_aux: pinmux-aux {
+				groups = "dpaux-io";
+				function = "aux";
+			};
+
+			state_dpaux_i2c: pinmux-i2c {
+				groups = "dpaux-io";
+				function = "i2c";
+			};
+
+			state_dpaux_off: pinmux-off {
+				groups = "dpaux-io";
+				function = "off";
+			};
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		isp@54600000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54600000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPA>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+			status = "disabled";
+		};
+
+		isp@54680000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54680000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPB>;
+			resets = <&tegra_car 3>;
+			reset-names = "isp";
+			status = "disabled";
+		};
+
+		i2c@546c0000 {
+			compatible = "nvidia,tegra210-i2c-vi";
+			reg = <0x0 0x546c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_VI_I2C>,
+				 <&tegra_car TEGRA210_CLK_I2CSLOW>;
+			clock-names = "div-clk", "slow";
+			resets = <&tegra_car 208>;
+			reset-names = "i2c";
+			power-domains = <&pd_venc>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
+			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
+		clock-names = "gpu", "pwr", "ref";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra210-ictlr";
+		reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */
+		      <0x0 0x60004100 0x0 0x40>, /* secondary controller */
+		      <0x0 0x60004200 0x0 0x40>, /* tertiary controller */
+		      <0x0 0x60004300 0x0 0x40>, /* quaternary controller */
+		      <0x0 0x60004400 0x0 0x40>, /* quinary controller */
+		      <0x0 0x60004500 0x0 0x40>; /* senary controller */
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra210-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra210-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra210-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@60020000 {
+		compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x70000008 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@700008d4 {
+		compatible = "nvidia,tegra210-pinmux";
+		reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x294>; /* Mux registers */
+
+		sdmmc1_1v8_drv: pinmux-sdmmc1-1v8-drv {
+			sdmmc1 {
+				nvidia,pins = "drive_sdmmc1";
+				nvidia,pull-down-strength = <0x4>;
+				nvidia,pull-up-strength = <0x3>;
+			};
+		};
+
+		sdmmc1_3v3_drv: pinmux-sdmmc1-3v3-drv {
+			sdmmc1 {
+				nvidia,pins = "drive_sdmmc1";
+				nvidia,pull-down-strength = <0x8>;
+				nvidia,pull-up-strength = <0x8>;
+			};
+		};
+
+		sdmmc2_1v8_drv: pinmux-sdmmc2-1v8-drv {
+			sdmmc2 {
+				nvidia,pins = "drive_sdmmc2";
+				nvidia,pull-down-strength = <0x10>;
+				nvidia,pull-up-strength = <0x10>;
+			};
+		};
+
+		sdmmc3_1v8_drv: pinmux-sdmmc3-1v8-drv {
+			sdmmc3 {
+				nvidia,pins = "drive_sdmmc3";
+				nvidia,pull-down-strength = <0x4>;
+				nvidia,pull-up-strength = <0x3>;
+			};
+		};
+
+		sdmmc3_3v3_drv: pinmux-sdmmc3-3v3-drv {
+			sdmmc3 {
+				nvidia,pins = "drive_sdmmc3";
+				nvidia,pull-down-strength = <0x8>;
+				nvidia,pull-up-strength = <0x8>;
+			};
+		};
+
+		sdmmc4_1v8_drv: pinmux-sdmmc4-1v8-drv {
+			sdmmc4 {
+				nvidia,pins = "drive_sdmmc4";
+				nvidia,pull-down-strength = <0x10>;
+				nvidia,pull-up-strength = <0x10>;
+			};
+		};
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the compatible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA210_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux1_i2c>;
+		pinctrl-1 = <&state_dpaux1_off>;
+		pinctrl-names = "default", "idle";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d100 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra124-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		pinctrl-0 = <&state_dpaux_i2c>;
+		pinctrl-1 = <&state_dpaux_off>;
+		pinctrl-names = "default", "idle";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&tegra_pmc>;
+		clocks = <&tegra_car TEGRA210_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	tegra_pmc: pmc@7000e400 {
+		compatible = "nvidia,tegra210-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+		#clock-cells = <1>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		pinmux {
+			pex_dpd_disable: pex-dpd-disable {
+				pins = "pex-bias", "pex-clk1", "pex-clk2";
+				low-power-disable;
+			};
+
+			pex_dpd_enable: pex-dpd-enable {
+				pins = "pex-bias", "pex-clk1", "pex-clk2";
+				low-power-enable;
+			};
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+		};
+
+		powergates {
+			pd_audio: aud {
+				clocks = <&tegra_car TEGRA210_CLK_APE>,
+					 <&tegra_car TEGRA210_CLK_APB2APE>;
+				resets = <&tegra_car 198>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_sor: sor {
+				clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_CILAB>,
+					 <&tegra_car TEGRA210_CLK_CILCD>,
+					 <&tegra_car TEGRA210_CLK_CILE>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				resets = <&tegra_car TEGRA210_CLK_SOR0>,
+					 <&tegra_car TEGRA210_CLK_SOR1>,
+					 <&tegra_car TEGRA210_CLK_DSIA>,
+					 <&tegra_car TEGRA210_CLK_DSIB>,
+					 <&tegra_car TEGRA210_CLK_DPAUX>,
+					 <&tegra_car TEGRA210_CLK_DPAUX1>,
+					 <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_venc: venc {
+				clocks = <&tegra_car TEGRA210_CLK_VI>,
+					 <&tegra_car TEGRA210_CLK_CSI>;
+				resets = <&mc TEGRA210_MC_RESET_VI>,
+					 <&tegra_car 20>,
+					 <&tegra_car 52>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_vic: vic {
+				clocks = <&tegra_car TEGRA210_CLK_VIC03>;
+				resets = <&tegra_car 178>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbss: xusba {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbdev: xusbb {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
+				resets = <&tegra_car 95>;
+				#power-domain-cells = <0>;
+			};
+
+			pd_xusbhost: xusbc {
+				clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra210-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra210-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	emc: external-memory-controller@7001b000 {
+		compatible = "nvidia,tegra210-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>,
+		      <0x0 0x7001e000 0x0 0x1000>,
+		      <0x0 0x7001f000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_EMC>;
+		clock-names = "emc";
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		nvidia,memory-controller = <&mc>;
+		#cooling-cells = <2>;
+	};
+
+	sata@70020000 {
+		compatible = "nvidia,tegra210-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>, /* SATA */
+		      <0x0 0x70001100 0x0 0x1000>; /* SATA AUX */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SATA>,
+			 <&tegra_car TEGRA210_CLK_SATA_OOB>;
+		clock-names = "sata", "sata-oob";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 129>,
+			 <&tegra_car 123>;
+		reset-names = "sata", "sata-cold", "sata-oob";
+		status = "disabled";
+	};
+
+	hda@70030000 {
+		compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_HDA>,
+		         <&tegra_car TEGRA210_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA210_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		power-domains = <&pd_sor>;
+		status = "disabled";
+	};
+
+	usb@70090000 {
+		compatible = "nvidia,tegra210-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA210_CLK_CLK_M>,
+			 <&tegra_car TEGRA210_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+		power-domains = <&pd_xusbhost>, <&pd_xusbss>;
+		power-domain-names = "xusb_host", "xusb_ss";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
+	padctl: padctl@7009f000 {
+		compatible = "nvidia,tegra210-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+		nvidia,pmc = <&tegra_pmc>;
+
+		status = "disabled";
+
+		pads {
+			usb2 {
+				clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			hsic {
+				clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+				clock-names = "trk";
+				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			pcie {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 205>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-5 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-6 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+
+			sata {
+				clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+				clock-names = "pll";
+				resets = <&tegra_car 204>;
+				reset-names = "phy";
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "disabled";
+			};
+
+			usb2-1 {
+				status = "disabled";
+			};
+
+			usb2-2 {
+				status = "disabled";
+			};
+
+			usb2-3 {
+				status = "disabled";
+			};
+
+			hsic-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			usb3-2 {
+				status = "disabled";
+			};
+
+			usb3-3 {
+				status = "disabled";
+			};
+		};
+	};
+
+	mmc@700b0000 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+				"sdmmc-3v3-drv", "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc1_3v3>;
+		pinctrl-1 = <&sdmmc1_1v8>;
+		pinctrl-2 = <&sdmmc1_3v3_drv>;
+		pinctrl-3 = <&sdmmc1_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,default-tap = <0x2>;
+		nvidia,default-trim = <0x4>;
+		assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+				  <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+				  <&tegra_car TEGRA210_CLK_PLL_C4>;
+		assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+		assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
+		status = "disabled";
+	};
+
+	mmc@700b0200 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc2_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+		nvidia,default-tap = <0x8>;
+		nvidia,default-trim = <0x0>;
+		status = "disabled";
+	};
+
+	mmc@700b0400 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+				"sdmmc-3v3-drv", "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc3_3v3>;
+		pinctrl-1 = <&sdmmc3_1v8>;
+		pinctrl-2 = <&sdmmc3_3v3_drv>;
+		pinctrl-3 = <&sdmmc3_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+		nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+		nvidia,default-tap = <0x3>;
+		nvidia,default-trim = <0x3>;
+		status = "disabled";
+	};
+
+	mmc@700b0600 {
+		compatible = "nvidia,tegra210-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+			 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+		clock-names = "sdhci", "tmclk";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";
+		pinctrl-0 = <&sdmmc4_1v8_drv>;
+		pinctrl-1 = <&sdmmc4_1v8_drv>;
+		nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+		nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+		nvidia,default-tap = <0x8>;
+		nvidia,default-trim = <0x0>;
+		assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+				  <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+		assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+		nvidia,dqs-trim = <40>;
+		mmc-hs400-1_8v;
+		status = "disabled";
+	};
+
+	usb@700d0000 {
+		compatible = "nvidia,tegra210-xudc";
+		reg = <0x0 0x700d0000 0x0 0x8000>,
+		      <0x0 0x700d8000 0x0 0x1000>,
+		      <0x0 0x700d9000 0x0 0x1000>;
+		reg-names = "base", "fpci", "ipfs";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>;
+		clock-names = "dev", "ss", "ss_src", "fs_src", "hs_src";
+		power-domains = <&pd_xusbdev>, <&pd_xusbss>;
+		power-domain-names = "dev", "ss";
+		nvidia,xusb-padctl = <&padctl>;
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@700e2000 {
+		compatible = "nvidia,tegra210-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg-names = "soctherm-reg", "car-reg";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "thermal", "edp";
+		clocks = <&tegra_car TEGRA210_CLK_TSENSOR>,
+			<&tegra_car TEGRA210_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+
+		throttle-cfgs {
+			throttle_heavy: heavy {
+				nvidia,priority = <100>;
+				nvidia,cpu-throt-percent = <85>;
+				nvidia,gpu-throt-level = <TEGRA_SOCTHERM_THROT_LEVEL_HIGH>;
+
+				#cooling-cells = <2>;
+			};
+		};
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra210-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		power-domains = <&pd_sor>;
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra210-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA210_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA210_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>,
+			 <&tegra_car 155>;
+		reset-names = "dvco", "dfll";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		status = "disabled";
+	};
+
+	aconnect@702c0000 {
+		compatible = "nvidia,tegra210-aconnect";
+		clocks = <&tegra_car TEGRA210_CLK_APE>,
+			 <&tegra_car TEGRA210_CLK_APB2APE>;
+		clock-names = "ape", "apb2ape";
+		power-domains = <&pd_audio>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
+		status = "disabled";
+
+		tegra_ahub: ahub@702d0800 {
+			compatible = "nvidia,tegra210-ahub";
+			reg = <0x702d0800 0x800>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "ahub";
+			assigned-clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>;
+			assigned-clock-rates = <81600000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x702d0000 0x702d0000 0x0000e400>;
+			status = "disabled";
+
+			tegra_admaif: admaif@702d0000 {
+				compatible = "nvidia,tegra210-admaif";
+				reg = <0x702d0000 0x800>;
+				dmas = <&adma 1>,  <&adma 1>,
+				       <&adma 2>,  <&adma 2>,
+				       <&adma 3>,  <&adma 3>,
+				       <&adma 4>,  <&adma 4>,
+				       <&adma 5>,  <&adma 5>,
+				       <&adma 6>,  <&adma 6>,
+				       <&adma 7>,  <&adma 7>,
+				       <&adma 8>,  <&adma 8>,
+				       <&adma 9>,  <&adma 9>,
+				       <&adma 10>, <&adma 10>;
+				dma-names = "rx1",  "tx1",
+					    "rx2",  "tx2",
+					    "rx3",  "tx3",
+					    "rx4",  "tx4",
+					    "rx5",  "tx5",
+					    "rx6",  "tx6",
+					    "rx7",  "tx7",
+					    "rx8",  "tx8",
+					    "rx9",  "tx9",
+					    "rx10", "tx10";
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					admaif1_port: port@0 {
+						reg = <0>;
+
+						admaif1_ep: endpoint {
+							remote-endpoint = <&xbar_admaif1_ep>;
+						};
+					};
+
+					admaif2_port: port@1 {
+						reg = <1>;
+
+						admaif2_ep: endpoint {
+							remote-endpoint = <&xbar_admaif2_ep>;
+						};
+					};
+
+					admaif3_port: port@2 {
+						reg = <2>;
+
+						admaif3_ep: endpoint {
+							remote-endpoint = <&xbar_admaif3_ep>;
+						};
+					};
+
+					admaif4_port: port@3 {
+						reg = <3>;
+
+						admaif4_ep: endpoint {
+							remote-endpoint = <&xbar_admaif4_ep>;
+						};
+					};
+
+					admaif5_port: port@4 {
+						reg = <4>;
+
+						admaif5_ep: endpoint {
+							remote-endpoint = <&xbar_admaif5_ep>;
+						};
+					};
+
+					admaif6_port: port@5 {
+						reg = <5>;
+
+						admaif6_ep: endpoint {
+							remote-endpoint = <&xbar_admaif6_ep>;
+						};
+					};
+
+					admaif7_port: port@6 {
+						reg = <6>;
+
+						admaif7_ep: endpoint {
+							remote-endpoint = <&xbar_admaif7_ep>;
+						};
+					};
+
+					admaif8_port: port@7 {
+						reg = <7>;
+
+						admaif8_ep: endpoint {
+							remote-endpoint = <&xbar_admaif8_ep>;
+						};
+					};
+
+					admaif9_port: port@8 {
+						reg = <8>;
+
+						admaif9_ep: endpoint {
+							remote-endpoint = <&xbar_admaif9_ep>;
+						};
+					};
+
+					admaif10_port: port@9 {
+						reg = <9>;
+
+						admaif10_ep: endpoint {
+							remote-endpoint = <&xbar_admaif10_ep>;
+						};
+					};
+				};
+			};
+
+			tegra_i2s1: i2s@702d1000 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1000 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S0>,
+					 <&tegra_car TEGRA210_CLK_I2S0_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S0>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S1";
+				status = "disabled";
+			};
+
+			tegra_i2s2: i2s@702d1100 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1100 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S1>,
+					 <&tegra_car TEGRA210_CLK_I2S1_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S1>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S2";
+				status = "disabled";
+			};
+
+			tegra_i2s3: i2s@702d1200 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1200 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S2>,
+					 <&tegra_car TEGRA210_CLK_I2S2_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S2>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S3";
+				status = "disabled";
+			};
+
+			tegra_i2s4: i2s@702d1300 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1300 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S3>,
+					 <&tegra_car TEGRA210_CLK_I2S3_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S3>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S4";
+				status = "disabled";
+			};
+
+			tegra_i2s5: i2s@702d1400 {
+				compatible = "nvidia,tegra210-i2s";
+				reg = <0x702d1400 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_I2S4>,
+					 <&tegra_car TEGRA210_CLK_I2S4_SYNC>;
+				clock-names = "i2s", "sync_input";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_I2S4>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <1536000>;
+				sound-name-prefix = "I2S5";
+				status = "disabled";
+			};
+
+			tegra_sfc1: sfc@702d2000 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2000 0x200>;
+				sound-name-prefix = "SFC1";
+				status = "disabled";
+			};
+
+			tegra_sfc2: sfc@702d2200 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2200 0x200>;
+				sound-name-prefix = "SFC2";
+				status = "disabled";
+			};
+
+			tegra_sfc3: sfc@702d2400 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2400 0x200>;
+				sound-name-prefix = "SFC3";
+				status = "disabled";
+			};
+
+			tegra_sfc4: sfc@702d2600 {
+				compatible = "nvidia,tegra210-sfc";
+				reg = <0x702d2600 0x200>;
+				sound-name-prefix = "SFC4";
+				status = "disabled";
+			};
+
+			tegra_amx1: amx@702d3000 {
+				compatible = "nvidia,tegra210-amx";
+				reg = <0x702d3000 0x100>;
+				sound-name-prefix = "AMX1";
+				status = "disabled";
+			};
+
+			tegra_amx2: amx@702d3100 {
+				compatible = "nvidia,tegra210-amx";
+				reg = <0x702d3100 0x100>;
+				sound-name-prefix = "AMX2";
+				status = "disabled";
+			};
+
+			tegra_adx1: adx@702d3800 {
+				compatible = "nvidia,tegra210-adx";
+				reg = <0x702d3800 0x100>;
+				sound-name-prefix = "ADX1";
+				status = "disabled";
+			};
+
+			tegra_adx2: adx@702d3900 {
+				compatible = "nvidia,tegra210-adx";
+				reg = <0x702d3900 0x100>;
+				sound-name-prefix = "ADX2";
+				status = "disabled";
+			};
+
+			tegra_dmic1: dmic@702d4000 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x702d4000 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+				clock-names = "dmic";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC1>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC1";
+				status = "disabled";
+			};
+
+			tegra_dmic2: dmic@702d4100 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x702d4100 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_DMIC2>;
+				clock-names = "dmic";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC2>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC2";
+				status = "disabled";
+			};
+
+			tegra_dmic3: dmic@702d4200 {
+				compatible = "nvidia,tegra210-dmic";
+				reg = <0x702d4200 0x100>;
+				clocks = <&tegra_car TEGRA210_CLK_DMIC3>;
+				clock-names = "dmic";
+				assigned-clocks = <&tegra_car TEGRA210_CLK_DMIC3>;
+				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+				assigned-clock-rates = <3072000>;
+				sound-name-prefix = "DMIC3";
+				status = "disabled";
+			};
+
+			tegra_ope1: processing-engine@702d8000 {
+				compatible = "nvidia,tegra210-ope";
+				reg = <0x702d8000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				sound-name-prefix = "OPE1";
+				status = "disabled";
+
+				equalizer@702d8100 {
+					compatible = "nvidia,tegra210-peq";
+					reg = <0x702d8100 0x100>;
+				};
+
+				dynamic-range-compressor@702d8200 {
+					compatible = "nvidia,tegra210-mbdrc";
+					reg = <0x702d8200 0x200>;
+				};
+			};
+
+			tegra_ope2: processing-engine@702d8400 {
+				compatible = "nvidia,tegra210-ope";
+				reg = <0x702d8400 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				sound-name-prefix = "OPE2";
+				status = "disabled";
+
+				equalizer@702d8500 {
+					compatible = "nvidia,tegra210-peq";
+					reg = <0x702d8500 0x100>;
+				};
+
+				dynamic-range-compressor@702d8600 {
+					compatible = "nvidia,tegra210-mbdrc";
+					reg = <0x702d8600 0x200>;
+				};
+			};
+
+			tegra_mvc1: mvc@702da000 {
+				compatible = "nvidia,tegra210-mvc";
+				reg = <0x702da000 0x200>;
+				sound-name-prefix = "MVC1";
+				status = "disabled";
+			};
+
+			tegra_mvc2: mvc@702da200 {
+				compatible = "nvidia,tegra210-mvc";
+				reg = <0x702da200 0x200>;
+				sound-name-prefix = "MVC2";
+				status = "disabled";
+			};
+
+			tegra_amixer: amixer@702dbb00 {
+				compatible = "nvidia,tegra210-amixer";
+				reg = <0x702dbb00 0x800>;
+				sound-name-prefix = "MIXER1";
+				status = "disabled";
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					xbar_admaif1_ep: endpoint {
+						remote-endpoint = <&admaif1_ep>;
+					};
+				};
+
+				port@1 {
+					reg = <0x1>;
+
+					xbar_admaif2_ep: endpoint {
+						remote-endpoint = <&admaif2_ep>;
+					};
+				};
+
+				port@2 {
+					reg = <0x2>;
+
+					xbar_admaif3_ep: endpoint {
+						remote-endpoint = <&admaif3_ep>;
+					};
+				};
+
+				port@3 {
+					reg = <0x3>;
+
+					xbar_admaif4_ep: endpoint {
+						remote-endpoint = <&admaif4_ep>;
+					};
+				};
+
+				port@4 {
+					reg = <0x4>;
+					xbar_admaif5_ep: endpoint {
+						remote-endpoint = <&admaif5_ep>;
+					};
+				};
+				port@5 {
+					reg = <0x5>;
+
+					xbar_admaif6_ep: endpoint {
+						remote-endpoint = <&admaif6_ep>;
+					};
+				};
+
+				port@6 {
+					reg = <0x6>;
+
+					xbar_admaif7_ep: endpoint {
+						remote-endpoint = <&admaif7_ep>;
+					};
+				};
+
+				port@7 {
+					reg = <0x7>;
+
+					xbar_admaif8_ep: endpoint {
+						remote-endpoint = <&admaif8_ep>;
+					};
+				};
+
+				port@8 {
+					reg = <0x8>;
+
+					xbar_admaif9_ep: endpoint {
+						remote-endpoint = <&admaif9_ep>;
+					};
+				};
+
+				port@9 {
+					reg = <0x9>;
+
+					xbar_admaif10_ep: endpoint {
+						remote-endpoint = <&admaif10_ep>;
+					};
+				};
+			};
+		};
+
+		adma: dma-controller@702e2000 {
+			compatible = "nvidia,tegra210-adma";
+			reg = <0x702e2000 0x2000>;
+			interrupt-parent = <&agic>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+			clock-names = "d_audio";
+			status = "disabled";
+		};
+
+		agic: interrupt-controller@702f9000 {
+			compatible = "nvidia,tegra210-agic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x702f9000 0x1000>,
+			      <0x702fa000 0x2000>;
+			interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&tegra_car TEGRA210_CLK_APE>;
+			clock-names = "clk";
+			status = "disabled";
+		};
+	};
+
+	spi@70410000 {
+		compatible = "nvidia,tegra210-qspi";
+		reg = <0x0 0x70410000 0x0 0x1000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+			 <&tegra_car TEGRA210_CLK_QSPI_PM>;
+		clock-names = "qspi", "qspi_out";
+		resets = <&tegra_car 211>;
+		dmas = <&apbdma 5>, <&apbdma 5>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0>;
+			clocks = <&tegra_car TEGRA210_CLK_CCLK_G>,
+				 <&tegra_car TEGRA210_CLK_PLL_X>,
+				 <&tegra_car TEGRA210_CLK_PLL_P_OUT4>,
+				 <&dfll>;
+			clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
+			clock-latency = <300000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <1>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <3>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&L2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000007>;
+				entry-latency-us = <100>;
+				exit-latency-us = <30>;
+				min-residency-us = <1000>;
+				wakeup-latency-us = <130>;
+				idle-state-name = "cpu-sleep";
+				status = "disabled";
+			};
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0} &{/cpus/cpu@1}
+				      &{/cpus/cpu@2} &{/cpus/cpu@3}>;
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+			 <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+
+		assigned-clocks = <&tegra_car TEGRA210_CLK_PLL_A>,
+				  <&tegra_car TEGRA210_CLK_PLL_A_OUT0>,
+				  <&tegra_car TEGRA210_CLK_EXTERN1>;
+		assigned-clock-parents = <0>, <0>, <&tegra_car TEGRA210_CLK_PLL_A_OUT0>;
+		assigned-clock-rates = <368640000>, <49152000>, <12288000>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+
+			trips {
+				cpu-shutdown-trip {
+					temperature = <102500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_throttle_trip: throttle-trip {
+					temperature = <98500>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+
+			trips {
+				dram_nominal: mem-nominal-trip {
+					temperature = <50000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				dram_throttle: mem-throttle-trip {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "active";
+				};
+
+				mem-hot-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+
+				mem-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				dram-passive {
+					cooling-device = <&emc 0 0>;
+					trip = <&dram_nominal>;
+				};
+
+				dram-active {
+					cooling-device = <&emc 1 1>;
+					trip = <&dram_throttle>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+
+			trips {
+				gpu-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				gpu_throttle_trip: throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_throttle_trip>;
+					cooling-device = <&throttle_heavy 1 1>;
+				};
+			};
+		};
+
+		pllx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+
+			trips {
+				pllx-shutdown-trip {
+					temperature = <103000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				pllx-throttle-trip {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * There are currently no cooling maps,
+				 * because there are no cooling devices.
+				 */
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		arm,no-tick-in-suspend;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
new file mode 100644
index 000000000..cb792041f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+#include "tegra234-p3701.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin";
+	compatible = "nvidia,p3701-0000", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+
+			ports {
+				usb2-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-2 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8_ls: regulator-vdd-1v8-ls {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_LS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vdd_12v_pcie: regulator-vdd-12v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V_PCIE";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio TEGRA234_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
+
+	thermal-zones {
+		tj-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				tj_trip_active0: active-0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active1: active-1 {
+					temperature = <95000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
new file mode 100644
index 000000000..62c4fdad0
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0008.dtsi
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+#include "tegra234-p3701.dtsi"
+
+/ {
+	compatible = "nvidia,p3701-0008", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		i2c@c240000 {
+			status = "okay";
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			thermal-sensor@4c {
+				status = "okay";
+				reg = <0x4c>;
+				vcc-supply = <&vdd_1v8_ao>;
+			};
+		};
+
+		thermal {
+			status = "okay";
+		};
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ls: regulator-vdd-1v8-ls {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_LS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-AO-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
new file mode 100644
index 000000000..5e7797df5
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi
@@ -0,0 +1,1991 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	compatible = "nvidia,p3701", "nvidia,tegra234";
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				i2s@2901000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif: endpoint {
+								remote-endpoint = <&xbar_i2s1>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif: endpoint {
+								remote-endpoint = <&xbar_i2s2>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif: endpoint {
+								remote-endpoint = <&xbar_i2s4>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif: endpoint {
+								remote-endpoint = <&xbar_i2s6>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc1_in>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc1_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc2_in>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc2_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc3_in>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc3_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc4_in>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc4_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1: endpoint {
+								remote-endpoint = <&xbar_amx1_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2: endpoint {
+								remote-endpoint = <&xbar_amx1_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3: endpoint {
+								remote-endpoint = <&xbar_amx1_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4: endpoint {
+								remote-endpoint = <&xbar_amx1_in4>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out: endpoint {
+								remote-endpoint = <&xbar_amx1_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1: endpoint {
+								remote-endpoint = <&xbar_amx2_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2: endpoint {
+								remote-endpoint = <&xbar_amx2_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx2_in3: endpoint {
+								remote-endpoint = <&xbar_amx2_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx2_in4: endpoint {
+								remote-endpoint = <&xbar_amx2_in4>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out: endpoint {
+								remote-endpoint = <&xbar_amx2_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1: endpoint {
+								remote-endpoint = <&xbar_amx3_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2: endpoint {
+								remote-endpoint = <&xbar_amx3_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3: endpoint {
+								remote-endpoint = <&xbar_amx3_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4: endpoint {
+								remote-endpoint = <&xbar_amx3_in4>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out: endpoint {
+								remote-endpoint = <&xbar_amx3_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1: endpoint {
+								remote-endpoint = <&xbar_amx4_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2: endpoint {
+								remote-endpoint = <&xbar_amx4_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3: endpoint {
+								remote-endpoint = <&xbar_amx4_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4: endpoint {
+								remote-endpoint = <&xbar_amx4_in4>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out: endpoint {
+								remote-endpoint = <&xbar_amx4_out>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in: endpoint {
+								remote-endpoint = <&xbar_adx1_in>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1: endpoint {
+								remote-endpoint = <&xbar_adx1_out1>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2: endpoint {
+								remote-endpoint = <&xbar_adx1_out2>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3: endpoint {
+								remote-endpoint = <&xbar_adx1_out3>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4: endpoint {
+								remote-endpoint = <&xbar_adx1_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in: endpoint {
+								remote-endpoint = <&xbar_adx2_in>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1: endpoint {
+								remote-endpoint = <&xbar_adx2_out1>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2: endpoint {
+								remote-endpoint = <&xbar_adx2_out2>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3: endpoint {
+								remote-endpoint = <&xbar_adx2_out3>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4: endpoint {
+								remote-endpoint = <&xbar_adx2_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in: endpoint {
+								remote-endpoint = <&xbar_adx3_in>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1: endpoint {
+								remote-endpoint = <&xbar_adx3_out1>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2: endpoint {
+								remote-endpoint = <&xbar_adx3_out2>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3: endpoint {
+								remote-endpoint = <&xbar_adx3_out3>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4: endpoint {
+								remote-endpoint = <&xbar_adx3_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in: endpoint {
+								remote-endpoint = <&xbar_adx4_in>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1: endpoint {
+								remote-endpoint = <&xbar_adx4_out1>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2: endpoint {
+								remote-endpoint = <&xbar_adx4_out2>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3: endpoint {
+								remote-endpoint = <&xbar_adx4_out3>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4: endpoint {
+								remote-endpoint = <&xbar_adx4_out4>;
+							};
+						};
+					};
+				};
+
+				dmic@2904200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif: endpoint {
+								remote-endpoint = <&xbar_dmic3>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				processing-engine@2908000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							ope1_cif_in_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_in_ep>;
+							};
+						};
+
+						ope1_out_port: port@1 {
+							reg = <0x1>;
+
+							ope1_cif_out_ep: endpoint {
+								remote-endpoint = <&xbar_ope1_out_ep>;
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc1_in>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc1_out>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc2_in>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc2_out>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mix_in1: endpoint {
+								remote-endpoint = <&xbar_mix_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mix_in2: endpoint {
+								remote-endpoint = <&xbar_mix_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mix_in3: endpoint {
+								remote-endpoint = <&xbar_mix_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mix_in4: endpoint {
+								remote-endpoint = <&xbar_mix_in4>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mix_in5: endpoint {
+								remote-endpoint = <&xbar_mix_in5>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mix_in6: endpoint {
+								remote-endpoint = <&xbar_mix_in6>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mix_in7: endpoint {
+								remote-endpoint = <&xbar_mix_in7>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mix_in8: endpoint {
+								remote-endpoint = <&xbar_mix_in8>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mix_in9: endpoint {
+								remote-endpoint = <&xbar_mix_in9>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mix_in10: endpoint {
+								remote-endpoint = <&xbar_mix_in10>;
+							};
+						};
+
+						mix_out1_port: port@a {
+							reg = <0xa>;
+
+							mix_out1: endpoint {
+								remote-endpoint = <&xbar_mix_out1>;
+							};
+						};
+
+						mix_out2_port: port@b {
+							reg = <0xb>;
+
+							mix_out2: endpoint {
+								remote-endpoint = <&xbar_mix_out2>;
+							};
+						};
+
+						mix_out3_port: port@c {
+							reg = <0xc>;
+
+							mix_out3: endpoint {
+								remote-endpoint = <&xbar_mix_out3>;
+							};
+						};
+
+						mix_out4_port: port@d {
+							reg = <0xd>;
+
+							mix_out4: endpoint {
+								remote-endpoint = <&xbar_mix_out4>;
+							};
+						};
+
+						mix_out5_port: port@e {
+							reg = <0xe>;
+
+							mix_out5: endpoint {
+								remote-endpoint = <&xbar_mix_out5>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0: endpoint {
+								remote-endpoint = <&xbar_admaif0>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1: endpoint {
+								remote-endpoint = <&xbar_admaif1>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2: endpoint {
+								remote-endpoint = <&xbar_admaif2>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3: endpoint {
+								remote-endpoint = <&xbar_admaif3>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4: endpoint {
+								remote-endpoint = <&xbar_admaif4>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5: endpoint {
+								remote-endpoint = <&xbar_admaif5>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6: endpoint {
+								remote-endpoint = <&xbar_admaif6>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7: endpoint {
+								remote-endpoint = <&xbar_admaif7>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8: endpoint {
+								remote-endpoint = <&xbar_admaif8>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9: endpoint {
+								remote-endpoint = <&xbar_admaif9>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10: endpoint {
+								remote-endpoint = <&xbar_admaif10>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11: endpoint {
+								remote-endpoint = <&xbar_admaif11>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12: endpoint {
+								remote-endpoint = <&xbar_admaif12>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13: endpoint {
+								remote-endpoint = <&xbar_admaif13>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14: endpoint {
+								remote-endpoint = <&xbar_admaif14>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15: endpoint {
+								remote-endpoint = <&xbar_admaif15>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16: endpoint {
+								remote-endpoint = <&xbar_admaif16>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17: endpoint {
+								remote-endpoint = <&xbar_admaif17>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18: endpoint {
+								remote-endpoint = <&xbar_admaif18>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19: endpoint {
+								remote-endpoint = <&xbar_admaif19>;
+							};
+						};
+					};
+				};
+
+				asrc@2910000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							asrc_in1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in1_ep>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							asrc_in2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in2_ep>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							asrc_in3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in3_ep>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							asrc_in4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in4_ep>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							asrc_in5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in5_ep>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							asrc_in6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in6_ep>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							asrc_in7_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_in7_ep>;
+							};
+						};
+
+						asrc_out1_port: port@7 {
+							reg = <0x7>;
+
+							asrc_out1_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out1_ep>;
+							};
+						};
+
+						asrc_out2_port: port@8 {
+							reg = <0x8>;
+
+							asrc_out2_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out2_ep>;
+							};
+						};
+
+						asrc_out3_port: port@9 {
+							reg = <0x9>;
+
+							asrc_out3_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out3_ep>;
+							};
+						};
+
+						asrc_out4_port: port@a {
+							reg = <0xa>;
+
+							asrc_out4_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out4_ep>;
+							};
+						};
+
+						asrc_out5_port: port@b {
+							reg = <0xb>;
+
+							asrc_out5_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out5_ep>;
+							};
+						};
+
+						asrc_out6_port:	port@c {
+							reg = <0xc>;
+
+							asrc_out6_ep: endpoint {
+								remote-endpoint = <&xbar_asrc_out6_ep>;
+							};
+						};
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0: endpoint {
+							remote-endpoint = <&admaif0>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1: endpoint {
+							remote-endpoint = <&admaif1>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2: endpoint {
+							remote-endpoint = <&admaif2>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3: endpoint {
+							remote-endpoint = <&admaif3>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4: endpoint {
+							remote-endpoint = <&admaif4>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5: endpoint {
+							remote-endpoint = <&admaif5>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6: endpoint {
+							remote-endpoint = <&admaif6>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7: endpoint {
+							remote-endpoint = <&admaif7>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8: endpoint {
+							remote-endpoint = <&admaif8>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9: endpoint {
+							remote-endpoint = <&admaif9>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10: endpoint {
+							remote-endpoint = <&admaif10>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11: endpoint {
+							remote-endpoint = <&admaif11>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12: endpoint {
+							remote-endpoint = <&admaif12>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13: endpoint {
+							remote-endpoint = <&admaif13>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14: endpoint {
+							remote-endpoint = <&admaif14>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15: endpoint {
+							remote-endpoint = <&admaif15>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16: endpoint {
+							remote-endpoint = <&admaif16>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17: endpoint {
+							remote-endpoint = <&admaif17>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18: endpoint {
+							remote-endpoint = <&admaif18>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19: endpoint {
+							remote-endpoint = <&admaif19>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1: endpoint {
+							remote-endpoint = <&i2s1_cif>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2: endpoint {
+							remote-endpoint = <&i2s2_cif>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4: endpoint {
+							remote-endpoint = <&i2s4_cif>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6: endpoint {
+							remote-endpoint = <&i2s6_cif>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3: endpoint {
+							remote-endpoint = <&dmic3_cif>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in: endpoint {
+							remote-endpoint = <&sfc1_cif_in>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out: endpoint {
+							remote-endpoint = <&sfc1_cif_out>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in: endpoint {
+							remote-endpoint = <&sfc2_cif_in>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out: endpoint {
+							remote-endpoint = <&sfc2_cif_out>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in: endpoint {
+							remote-endpoint = <&sfc3_cif_in>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out: endpoint {
+							remote-endpoint = <&sfc3_cif_out>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in: endpoint {
+							remote-endpoint = <&sfc4_cif_in>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out: endpoint {
+							remote-endpoint = <&sfc4_cif_out>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in: endpoint {
+							remote-endpoint = <&mvc1_cif_in>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out: endpoint {
+							remote-endpoint = <&mvc1_cif_out>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in: endpoint {
+							remote-endpoint = <&mvc2_cif_in>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out: endpoint {
+							remote-endpoint = <&mvc2_cif_out>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1: endpoint {
+							remote-endpoint = <&amx1_in1>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2: endpoint {
+							remote-endpoint = <&amx1_in2>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3: endpoint {
+							remote-endpoint = <&amx1_in3>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4: endpoint {
+							remote-endpoint = <&amx1_in4>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out: endpoint {
+							remote-endpoint = <&amx1_out>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1: endpoint {
+							remote-endpoint = <&amx2_in1>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2: endpoint {
+							remote-endpoint = <&amx2_in2>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3: endpoint {
+							remote-endpoint = <&amx2_in3>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4: endpoint {
+							remote-endpoint = <&amx2_in4>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out: endpoint {
+							remote-endpoint = <&amx2_out>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1: endpoint {
+							remote-endpoint = <&amx3_in1>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2: endpoint {
+							remote-endpoint = <&amx3_in2>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3: endpoint {
+							remote-endpoint = <&amx3_in3>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4: endpoint {
+							remote-endpoint = <&amx3_in4>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out: endpoint {
+							remote-endpoint = <&amx3_out>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1: endpoint {
+							remote-endpoint = <&amx4_in1>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2: endpoint {
+							remote-endpoint = <&amx4_in2>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3: endpoint {
+							remote-endpoint = <&amx4_in3>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4: endpoint {
+							remote-endpoint = <&amx4_in4>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out: endpoint {
+							remote-endpoint = <&amx4_out>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in: endpoint {
+							remote-endpoint = <&adx1_in>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1: endpoint {
+							remote-endpoint = <&adx1_out1>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2: endpoint {
+							remote-endpoint = <&adx1_out2>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3: endpoint {
+							remote-endpoint = <&adx1_out3>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4: endpoint {
+							remote-endpoint = <&adx1_out4>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in: endpoint {
+							remote-endpoint = <&adx2_in>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1: endpoint {
+							remote-endpoint = <&adx2_out1>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2: endpoint {
+							remote-endpoint = <&adx2_out2>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3: endpoint {
+							remote-endpoint = <&adx2_out3>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4: endpoint {
+							remote-endpoint = <&adx2_out4>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in: endpoint {
+							remote-endpoint = <&adx3_in>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1: endpoint {
+							remote-endpoint = <&adx3_out1>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2: endpoint {
+							remote-endpoint = <&adx3_out2>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3: endpoint {
+							remote-endpoint = <&adx3_out3>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4: endpoint {
+							remote-endpoint = <&adx3_out4>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in: endpoint {
+							remote-endpoint = <&adx4_in>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1: endpoint {
+							remote-endpoint = <&adx4_out1>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2: endpoint {
+							remote-endpoint = <&adx4_out2>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3: endpoint {
+							remote-endpoint = <&adx4_out3>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4: endpoint {
+							remote-endpoint = <&adx4_out4>;
+						};
+					};
+
+					xbar_mix_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mix_in1: endpoint {
+							remote-endpoint = <&mix_in1>;
+						};
+					};
+
+					xbar_mix_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mix_in2: endpoint {
+							remote-endpoint = <&mix_in2>;
+						};
+					};
+
+					xbar_mix_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mix_in3: endpoint {
+							remote-endpoint = <&mix_in3>;
+						};
+					};
+
+					xbar_mix_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mix_in4: endpoint {
+							remote-endpoint = <&mix_in4>;
+						};
+					};
+
+					xbar_mix_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mix_in5: endpoint {
+							remote-endpoint = <&mix_in5>;
+						};
+					};
+
+					xbar_mix_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mix_in6: endpoint {
+							remote-endpoint = <&mix_in6>;
+						};
+					};
+
+					xbar_mix_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mix_in7: endpoint {
+							remote-endpoint = <&mix_in7>;
+						};
+					};
+
+					xbar_mix_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mix_in8: endpoint {
+							remote-endpoint = <&mix_in8>;
+						};
+					};
+
+					xbar_mix_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mix_in9: endpoint {
+							remote-endpoint = <&mix_in9>;
+						};
+					};
+
+					xbar_mix_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mix_in10: endpoint {
+							remote-endpoint = <&mix_in10>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mix_out1: endpoint {
+							remote-endpoint = <&mix_out1>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mix_out2: endpoint {
+							remote-endpoint = <&mix_out2>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mix_out3: endpoint {
+							remote-endpoint = <&mix_out3>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mix_out4: endpoint {
+							remote-endpoint = <&mix_out4>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mix_out5: endpoint {
+							remote-endpoint = <&mix_out5>;
+						};
+					};
+
+					xbar_asrc_in1_port: port@63 {
+						reg = <0x63>;
+
+						xbar_asrc_in1_ep: endpoint {
+							remote-endpoint = <&asrc_in1_ep>;
+						};
+					};
+
+					port@64 {
+						reg = <0x64>;
+
+						xbar_asrc_out1_ep: endpoint {
+							remote-endpoint = <&asrc_out1_ep>;
+						};
+					};
+
+					xbar_asrc_in2_port: port@65 {
+						reg = <0x65>;
+
+						xbar_asrc_in2_ep: endpoint {
+							remote-endpoint = <&asrc_in2_ep>;
+						};
+					};
+
+					port@66 {
+						reg = <0x66>;
+
+						xbar_asrc_out2_ep: endpoint {
+							remote-endpoint = <&asrc_out2_ep>;
+						};
+					};
+
+					xbar_asrc_in3_port: port@67 {
+						reg = <0x67>;
+
+						xbar_asrc_in3_ep: endpoint {
+							remote-endpoint = <&asrc_in3_ep>;
+						};
+					};
+
+					port@68 {
+						reg = <0x68>;
+
+						xbar_asrc_out3_ep: endpoint {
+							remote-endpoint = <&asrc_out3_ep>;
+						};
+					};
+
+					xbar_asrc_in4_port: port@69 {
+						reg = <0x69>;
+
+						xbar_asrc_in4_ep: endpoint {
+							remote-endpoint = <&asrc_in4_ep>;
+						};
+					};
+
+					port@6a {
+						reg = <0x6a>;
+
+						xbar_asrc_out4_ep: endpoint {
+							remote-endpoint = <&asrc_out4_ep>;
+						};
+					};
+
+					xbar_asrc_in5_port: port@6b {
+						reg = <0x6b>;
+
+						xbar_asrc_in5_ep: endpoint {
+							remote-endpoint = <&asrc_in5_ep>;
+						};
+					};
+
+					port@6c {
+						reg = <0x6c>;
+
+						xbar_asrc_out5_ep: endpoint {
+							remote-endpoint = <&asrc_out5_ep>;
+						};
+					};
+
+					xbar_asrc_in6_port: port@6d {
+						reg = <0x6d>;
+
+						xbar_asrc_in6_ep: endpoint {
+							remote-endpoint = <&asrc_in6_ep>;
+						};
+					};
+
+					port@6e {
+						reg = <0x6e>;
+
+						xbar_asrc_out6_ep: endpoint {
+							remote-endpoint = <&asrc_out6_ep>;
+						};
+					};
+
+					xbar_asrc_in7_port: port@6f {
+						reg = <0x6f>;
+
+						xbar_asrc_in7_ep: endpoint {
+							remote-endpoint = <&asrc_in7_ep>;
+						};
+					};
+
+					xbar_ope1_in_port: port@70 {
+						reg = <0x70>;
+
+						xbar_ope1_in_ep: endpoint {
+							remote-endpoint = <&ope1_cif_in_ep>;
+						};
+					};
+
+					port@71 {
+						reg = <0x71>;
+
+						xbar_ope1_out_ep: endpoint {
+							remote-endpoint = <&ope1_cif_out_ep>;
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
new file mode 100644
index 000000000..4413a9b6d
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3701-0000.dtsi"
+#include "tegra234-p3737-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson AGX Orin Developer Kit";
+	compatible = "nvidia,p3737-0000+p3701-0000", "nvidia,p3701-0000", "nvidia,tegra234";
+
+	aliases {
+		mmc3 = "/bus@0/mmc@3460000";
+		serial0 = &tcu;
+		serial1 = &uarta;
+	};
+
+	chosen {
+		bootargs = "console=ttyTCU0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@31d0000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-1 {
+							status = "okay";
+						};
+
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					usb-role-switch;
+					status = "okay";
+
+					port {
+						hs_typec_p1: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p1>;
+						};
+					};
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+
+					port {
+						hs_typec_p0: endpoint {
+							remote-endpoint = <&hs_ucsi_ccg_p0>;
+						};
+					};
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+
+					port {
+						ss_typec_p0: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p0>;
+						};
+					};
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+
+					port {
+						ss_typec_p1: endpoint {
+							remote-endpoint = <&ss_ucsi_ccg_p1>;
+						};
+					};
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <3>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				    "usb3-0", "usb3-1", "usb3-2";
+		};
+
+		ethernet@6800000 {
+			status = "okay";
+
+			phy-handle = <&mgbe0_phy>;
+			phy-mode = "usxgmii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mgbe0_phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		i2c@c240000 {
+			status = "okay";
+
+			typec@8 {
+				compatible = "cypress,cypd4226";
+				reg = <0x08>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(Y, 4) IRQ_TYPE_LEVEL_LOW>;
+				firmware-name = "nvidia,jetson-agx-xavier";
+				status = "okay";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ccg_typec_con0: connector@0 {
+					compatible = "usb-c-connector";
+					reg = <0>;
+					label = "USB-C";
+					data-role = "host";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&hs_typec_p0>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ss_ucsi_ccg_p0: endpoint {
+								remote-endpoint = <&ss_typec_p0>;
+							};
+						};
+					};
+				};
+
+				ccg_typec_con1: connector@1 {
+					compatible = "usb-c-connector";
+					reg = <1>;
+					label = "USB-C";
+					data-role = "dual";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							hs_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&hs_typec_p1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ss_ucsi_ccg_p1: endpoint {
+								remote-endpoint = <&ss_typec_p1>;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+
+			reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon
+						      TEGRA234_AON_GPIO(AA, 4)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	pwm-fan {
+		cooling-levels = <66 215 255>;
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	sound {
+		compatible = "nvidia,tegra186-audio-graph-card";
+		status = "okay";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA Jetson AGX Orin APE";
+
+		widgets = "Microphone",	"CVB-RT MIC Jack",
+			  "Microphone",	"CVB-RT MIC",
+			  "Headphone",	"CVB-RT HP Jack",
+			  "Speaker",	"CVB-RT SPK";
+
+		routing = /* I2S1 <-> RT5640 */
+			  "CVB-RT AIF1 Playback",	"I2S1 DAP-Playback",
+			  "I2S1 DAP-Capture",		"CVB-RT AIF1 Capture",
+			  /* RT5640 codec controls */
+			  "CVB-RT HP Jack",		"CVB-RT HPOL",
+			  "CVB-RT HP Jack",		"CVB-RT HPOR",
+			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
+			  "CVB-RT SPK",			"CVB-RT SPOLP",
+			  "CVB-RT SPK",			"CVB-RT SPORP",
+			  "CVB-RT DMIC1",		"CVB-RT MIC",
+			  "CVB-RT DMIC2",		"CVB-RT MIC";
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
new file mode 100644
index 000000000..eb79e80a9
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/sound/rt5640.h>
+
+/ {
+	compatible = "nvidia,p3737-0000";
+
+	bus@0 {
+		aconnect@2900000 {
+			ahub@2900800 {
+				i2s@2901000 {
+					ports {
+						port@1 {
+							endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5640_ep>;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@56 {
+				compatible = "atmel,24c02";
+				reg = <0x56>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_sys>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		i2c@31e0000 {
+			status = "okay";
+
+			audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s1_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+		};
+
+		pwm@3280000 {
+			status = "okay";
+		};
+
+		pwm@32c0000 {
+			status = "okay";
+		};
+
+		pwm@32f0000 {
+			status = "okay";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_1v8_sys: regulator-vdd-1v8-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_SYS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
new file mode 100644
index 000000000..bac611d73
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002+p3701-0008.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include "tegra234-p3701-0008.dtsi"
+#include "tegra234-p3740-0002.dtsi"
+
+/ {
+	model = "NVIDIA IGX Orin Development Kit";
+	compatible = "nvidia,p3740-0002+p3701-0008", "nvidia,p3701-0008", "nvidia,tegra234";
+
+	aliases {
+		serial0 = &tcu;
+		serial1 = &uarta;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		i2c@3160000 {
+			status = "okay";
+		};
+
+		i2c@3180000 {
+			status = "okay";
+		};
+
+		i2c@3190000 {
+			status = "okay";
+		};
+
+		i2c@31b0000 {
+			status = "okay";
+		};
+
+		i2c@31c0000 {
+			status = "okay";
+
+		};
+
+		i2c@31e0000 {
+			status = "okay";
+		};
+
+		spi@3270000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA IGX Orin HDA";
+			status = "okay";
+		};
+
+		fuse@3810000 {
+			status = "okay";
+		};
+
+		i2c@c240000 {
+			status = "okay";
+		};
+
+		i2c@c250000 {
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			nvdec@15480000 {
+				status = "okay";
+			};
+		};
+
+		pcie@140e0000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			phys = <&p2u_gbe_4>, <&p2u_gbe_5>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+
+		pcie@14100000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			vpcie3v3-supply = <&vdd_3v3_wifi>;
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14160000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			phys = <&p2u_hsio_7>, <&p2u_hsio_6>, <&p2u_hsio_5>,
+			       <&p2u_hsio_4>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+				<&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+				<&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie@141e0000 {
+			status = "okay";
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	sound {
+		status = "okay";
+
+		compatible = "nvidia,tegra186-audio-graph-card";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+		       <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+		       <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+		       <&xbar_asrc_in7_port>,
+		       <&xbar_ope1_in_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+		       <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
+		       <&ope1_out_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA IGX Orin APE";
+
+		widgets = "Microphone",	"CVB-RT MIC Jack",
+			  "Microphone",	"CVB-RT MIC",
+			  "Headphone",	"CVB-RT HP Jack",
+			  "Speaker",	"CVB-RT SPK";
+
+		routing = /* I2S4 <-> RT5640 */
+			  "CVB-RT AIF1 Playback",	"I2S4 DAP-Playback",
+			  "I2S4 DAP-Capture",		"CVB-RT AIF1 Capture",
+			  /* RT5640 codec controls */
+			  "CVB-RT HP Jack",		"CVB-RT HPOL",
+			  "CVB-RT HP Jack",		"CVB-RT HPOR",
+			  "CVB-RT IN1P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2P",		"CVB-RT MIC Jack",
+			  "CVB-RT IN2N",		"CVB-RT MIC Jack",
+			  "CVB-RT IN3P",		"CVB-RT MIC Jack",
+			  "CVB-RT SPK",			"CVB-RT SPOLP",
+			  "CVB-RT SPK",			"CVB-RT SPORP",
+			  "CVB-RT SPK",			"CVB-RT LOUTL",
+			  "CVB-RT SPK",			"CVB-RT LOUTR",
+			  "CVB-RT DMIC1",		"CVB-RT MIC",
+			  "CVB-RT DMIC2",		"CVB-RT MIC";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
new file mode 100644
index 000000000..527f2f3ae
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3740-0002.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/sound/rt5640.h>
+
+/ {
+	compatible = "nvidia,p3740-0002";
+
+	bus@0 {
+		aconnect@2900000 {
+			ahub@2900800 {
+				i2s@2901300 {
+					ports {
+						port@1 {
+							endpoint {
+								dai-format = "i2s";
+								remote-endpoint = <&rt5640_ep>;
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					ports {
+						port@1 {
+							endpoint {
+								bitclock-master;
+								frame-master;
+							};
+						};
+					};
+				};
+			};
+		};
+
+		i2c@31c0000 {
+			rt5640: audio-codec@1c {
+				compatible = "realtek,rt5640";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA234_MAIN_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>;
+				clock-names = "mclk";
+
+				realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
+				realtek,dmic2-data-pin = <RT5640_DMIC2_DATA_PIN_NONE>;
+				realtek,jack-detect-source = <RT5640_JD_SRC_HDA_HEADER>;
+
+				sound-name-prefix = "CVB-RT";
+
+				port {
+					rt5640_ep: endpoint {
+						remote-endpoint = <&i2s4_dap>;
+						mclk-fs = <256>;
+					};
+				};
+			};
+
+			/* carrier board ID EEPROM */
+			eeprom@55 {
+				compatible = "atmel,24c02";
+				reg = <0x55>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_ls>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "otg";
+					usb-role-switch;
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <2>;
+					status = "okay";
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				"usb3-0", "usb3-1", "usb3-2";
+		};
+	};
+
+	vdd_3v3_dp: regulator-vdd-3v3-dp {
+				compatible = "regulator-fixed";
+				regulator-name = "VDD_3V3_DP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				vin-supply = <&vdd_3v3_sys>;
+				gpio = <&gpio TEGRA234_MAIN_GPIO(H, 6) 0>;
+				enable-active-high;
+				regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-vdd-3v3-sys {
+				compatible = "regulator-fixed";
+				regulator-name = "VDD_3V3_SYS";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_3v3_wifi: regulator-vdd-3v3-wifi {
+				compatible = "regulator-fixed";
+				regulator-name = "VDD_3V3_WIFI";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				gpio = <&gpio TEGRA234_MAIN_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+				regulator-boot-on;
+				enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
new file mode 100644
index 000000000..baf4f69e4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0000.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234-p3767.dtsi"
+
+/ {
+	compatible = "nvidia,p3767-0000", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin NX";
+
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin NX HDA";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi
new file mode 100644
index 000000000..232fa95ef
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767-0005.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234-p3767.dtsi"
+
+/ {
+	compatible = "nvidia,p3767-0005", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin Nano";
+
+	bus@0 {
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin Nano HDA";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
new file mode 100644
index 000000000..fe08e131b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra234.dtsi"
+
+/ {
+	compatible = "nvidia,p3767", "nvidia,tegra234";
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+
+				label = "module";
+				vcc-supply = <&vdd_1v8_hs>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		spi@3270000 {
+			status = "okay";
+
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <102000000>;
+				spi-tx-bus-width = <4>;
+				spi-rx-bus-width = <4>;
+			};
+		};
+
+		/*
+		 * This only exists on Jetson Orin Nano Developer Kit (SKU 5)
+		 * but UEFI needs this and will remove it on devices where it
+		 * doesn't exist.
+		 */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+		};
+
+		hda@3510000 {
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			vclamp-usb-supply = <&vdd_1v8_ao>;
+			avdd-usb-supply = <&vdd_3v3_ao>;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_hs: regulator-vdd-1v8-hs {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_HS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_ao: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_3v3_ao: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <33000000>;
+		regulator-max-microvolt = <33000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	thermal-zones {
+		tj-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <1000>;
+			status = "okay";
+
+			trips {
+				tj_trip_active0: active-0 {
+					temperature = <35000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active1: active-1 {
+					temperature = <74000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				tj_trip_active2: active-2 {
+					temperature = <95000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
new file mode 100644
index 000000000..e9460aedd
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0000.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767-0000.dtsi"
+#include "tegra234-p3768-0000.dtsi"
+
+/ {
+	compatible = "nvidia,p3768-0000+p3767-0000", "nvidia,p3767-0000", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin NX Engineering Reference Developer Kit";
+
+	aliases {
+		serial0 = &tcu;
+		serial1 = &uarta;
+		serial2 = &uarte;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@3140000 {
+			compatible = "nvidia,tegra194-hsuart";
+			reset-names = "serial";
+			status = "okay";
+		};
+
+		serial@31d0000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson Orin NX HDA";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	pwm-fan {
+		cooling-levels = <0 88 187 255>;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serial {
+		status = "okay";
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+
+				map-active-2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&tj_trip_active2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
new file mode 100644
index 000000000..9e9bb9ca8
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000+p3767-0005.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra234-p3767-0005.dtsi"
+#include "tegra234-p3768-0000.dtsi"
+
+/ {
+	compatible = "nvidia,p3768-0000+p3767-0005", "nvidia,p3767-0005", "nvidia,tegra234";
+	model = "NVIDIA Jetson Orin Nano Developer Kit";
+
+	pwm-fan {
+		cooling-levels = <0 88 187 255>;
+	};
+
+	thermal-zones {
+		tj-thermal {
+			cooling-maps {
+				map-active-0 {
+					cooling-device = <&fan 0 1>;
+					trip = <&tj_trip_active0>;
+				};
+
+				map-active-1 {
+					cooling-device = <&fan 1 2>;
+					trip = <&tj_trip_active1>;
+				};
+
+				map-active-2 {
+					cooling-device = <&fan 2 3>;
+					trip = <&tj_trip_active2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
new file mode 100644
index 000000000..39110c123
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3768-0000.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	compatible = "nvidia,p3768-0000";
+
+	aliases {
+		serial0 = &tcu;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		i2c@3160000 {
+			status = "okay";
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+
+				label = "system";
+				vcc-supply = <&vdd_1v8_sys>;
+				address-width = <8>;
+				pagesize = <8>;
+				size = <256>;
+				read-only;
+			};
+		};
+
+		serial@31d0000 {
+			status = "okay";
+		};
+
+		pwm@32a0000 {
+			assigned-clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				/* recovery port */
+				usb2-0 {
+					mode = "otg";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+					usb-role-switch;
+				};
+
+				/* hub */
+				usb2-1 {
+					mode = "host";
+					vbus-supply = <&vdd_1v1_hub>;
+					status = "okay";
+				};
+
+				/* M.2 Key-E */
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				/* hub */
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				/* J5 */
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb3-0";
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+			       <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+			       <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-1}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0",
+				    "usb3-1";
+		};
+
+		/* C8 - Ethernet */
+		pcie@140a0000 {
+			status = "okay";
+
+			num-lanes = <2>;
+
+			phys = <&p2u_gbe_2>, <&p2u_gbe_3>;
+			phy-names = "p2u-0", "p2u-1";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+		};
+
+		/* C1 - M.2 Key-E */
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		/* C4 - M.2 Key-M */
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		/* C7 - M.2 Key-M */
+		pcie@141e0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_gbe_0>, <&p2u_gbe_1>;
+			phy-names = "p2u-0", "p2u-1";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm3 0 45334>;
+		#cooling-cells = <2>;
+	};
+
+	vdd_1v8_sys: regulator-vdd-1v8-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_SYS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v1_hub: regulator-vdd-1v1-hub {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_AV10_HUB";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vdd_5v0_sys>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_aon TEGRA234_AON_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	serial {
+		status = "okay";
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
new file mode 100644
index 000000000..9f3e9f30c
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra234.dtsi"
+
+/ {
+	model = "NVIDIA Tegra234 VDK";
+	compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
+
+	aliases {
+		mmc3 = "/bus@0/mmc@3460000";
+		serial0 = &uarta;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlycon=uart8250,mmio32,0x03100000";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		serial@3100000 {
+			/delete-property/ dmas;
+			/delete-property/ dma-names;
+			status = "okay";
+		};
+
+		mmc@3460000 {
+			status = "okay";
+			bus-width = <8>;
+			non-removable;
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
new file mode 100644
index 000000000..ac69eacf8
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -0,0 +1,4099 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/tegra234-clock.h>
+#include <dt-bindings/gpio/tegra234-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/tegra234-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+#include <dt-bindings/power/tegra234-powergate.h>
+#include <dt-bindings/reset/tegra234-reset.h>
+#include <dt-bindings/thermal/tegra234-bpmp-thermal.h>
+
+/ {
+	compatible = "nvidia,tegra234";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	bus@0 {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+		misc@100000 {
+			compatible = "nvidia,tegra234-misc";
+			reg = <0x0 0x00100000 0x0 0xf000>,
+			      <0x0 0x0010f000 0x0 0x1000>;
+			status = "okay";
+		};
+
+		timer@2080000 {
+			compatible = "nvidia,tegra234-timer";
+			reg = <0x0 0x02080000 0x0 0x00121000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra234-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x0 0x02200000 0x0 0x10000>,
+			      <0x0 0x02210000 0x0 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinmux 0 0 164>;
+		};
+
+		pinmux: pinmux@2430000 {
+			compatible = "nvidia,tegra234-pinmux";
+			reg = <0x0 0x2430000 0x0 0x19100>;
+		};
+
+		gpcdma: dma-controller@2600000 {
+			compatible = "nvidia,tegra234-gpcdma",
+				     "nvidia,tegra186-gpcdma";
+			reg = <0x0 0x2600000 0x0 0x210000>;
+			resets = <&bpmp TEGRA234_RESET_GPCDMA>;
+			reset-names = "gpcdma";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			dma-channel-mask = <0xfffffffe>;
+			dma-coherent;
+		};
+
+		aconnect@2900000 {
+			compatible = "nvidia,tegra234-aconnect",
+				     "nvidia,tegra210-aconnect";
+			clocks = <&bpmp TEGRA234_CLK_APE>,
+				 <&bpmp TEGRA234_CLK_APB2APE>;
+			clock-names = "ape", "apb2ape";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_AUD>;
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x02900000 0x0 0x02900000 0x0 0x200000>;
+
+			tegra_ahub: ahub@2900800 {
+				compatible = "nvidia,tegra234-ahub";
+				reg = <0x0 0x02900800 0x0 0x800>;
+				clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				clock-names = "ahub";
+				assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+				assigned-clock-rates = <81600000>;
+				status = "disabled";
+
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges = <0x0 0x02900800 0x0 0x02900800 0x0 0x11800>;
+
+				tegra_i2s1: i2s@2901000 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S1>,
+						 <&bpmp TEGRA234_CLK_I2S1_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S1";
+					status = "disabled";
+				};
+
+				tegra_i2s2: i2s@2901100 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S2>,
+						 <&bpmp TEGRA234_CLK_I2S2_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S2";
+					status = "disabled";
+				};
+
+				tegra_i2s3: i2s@2901200 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901200 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S3>,
+						 <&bpmp TEGRA234_CLK_I2S3_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S3";
+					status = "disabled";
+				};
+
+				tegra_i2s4: i2s@2901300 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901300 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S4>,
+						 <&bpmp TEGRA234_CLK_I2S4_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S4";
+					status = "disabled";
+				};
+
+				tegra_i2s5: i2s@2901400 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901400 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S5>,
+						 <&bpmp TEGRA234_CLK_I2S5_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S5>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S5";
+					status = "disabled";
+				};
+
+				tegra_i2s6: i2s@2901500 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x0 0x2901500 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S6>,
+						 <&bpmp TEGRA234_CLK_I2S6_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S6>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S6";
+					status = "disabled";
+				};
+
+				tegra_sfc1: sfc@2902000 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902000 0x0 0x200>;
+					sound-name-prefix = "SFC1";
+					status = "disabled";
+				};
+
+				tegra_sfc2: sfc@2902200 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902200 0x0 0x200>;
+					sound-name-prefix = "SFC2";
+					status = "disabled";
+				};
+
+				tegra_sfc3: sfc@2902400 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902400 0x0 0x200>;
+					sound-name-prefix = "SFC3";
+					status = "disabled";
+				};
+
+				tegra_sfc4: sfc@2902600 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x0 0x2902600 0x0 0x200>;
+					sound-name-prefix = "SFC4";
+					status = "disabled";
+				};
+
+				tegra_amx1: amx@2903000 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903000 0x0 0x100>;
+					sound-name-prefix = "AMX1";
+					status = "disabled";
+				};
+
+				tegra_amx2: amx@2903100 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903100 0x0 0x100>;
+					sound-name-prefix = "AMX2";
+					status = "disabled";
+				};
+
+				tegra_amx3: amx@2903200 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903200 0x0 0x100>;
+					sound-name-prefix = "AMX3";
+					status = "disabled";
+				};
+
+				tegra_amx4: amx@2903300 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x0 0x2903300 0x0 0x100>;
+					sound-name-prefix = "AMX4";
+					status = "disabled";
+				};
+
+				tegra_adx1: adx@2903800 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903800 0x0 0x100>;
+					sound-name-prefix = "ADX1";
+					status = "disabled";
+				};
+
+				tegra_adx2: adx@2903900 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903900 0x0 0x100>;
+					sound-name-prefix = "ADX2";
+					status = "disabled";
+				};
+
+				tegra_adx3: adx@2903a00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903a00 0x0 0x100>;
+					sound-name-prefix = "ADX3";
+					status = "disabled";
+				};
+
+				tegra_adx4: adx@2903b00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x0 0x2903b00 0x0 0x100>;
+					sound-name-prefix = "ADX4";
+					status = "disabled";
+				};
+
+
+				tegra_dmic1: dmic@2904000 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+				};
+
+				tegra_dmic2: dmic@2904100 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+				};
+
+				tegra_dmic3: dmic@2904200 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904200 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC3";
+					status = "disabled";
+				};
+
+				tegra_dmic4: dmic@2904300 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x0 0x2904300 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC4";
+					status = "disabled";
+				};
+
+				tegra_dspk1: dspk@2905000 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905000 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+				};
+
+				tegra_dspk2: dspk@2905100 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x0 0x2905100 0x0 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK2";
+					status = "disabled";
+				};
+
+				tegra_ope1: processing-engine@2908000 {
+					compatible = "nvidia,tegra234-ope",
+						     "nvidia,tegra210-ope";
+					reg = <0x0 0x2908000 0x0 0x100>;
+					sound-name-prefix = "OPE1";
+					status = "disabled";
+
+					#address-cells = <2>;
+					#size-cells = <2>;
+					ranges;
+
+					equalizer@2908100 {
+						compatible = "nvidia,tegra234-peq",
+							     "nvidia,tegra210-peq";
+						reg = <0x0 0x2908100 0x0 0x100>;
+					};
+
+					dynamic-range-compressor@2908200 {
+						compatible = "nvidia,tegra234-mbdrc",
+							     "nvidia,tegra210-mbdrc";
+						reg = <0x0 0x2908200 0x0 0x200>;
+					};
+				};
+
+				tegra_mvc1: mvc@290a000 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a000 0x0 0x200>;
+					sound-name-prefix = "MVC1";
+					status = "disabled";
+				};
+
+				tegra_mvc2: mvc@290a200 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x0 0x290a200 0x0 0x200>;
+					sound-name-prefix = "MVC2";
+					status = "disabled";
+				};
+
+				tegra_amixer: amixer@290bb00 {
+					compatible = "nvidia,tegra234-amixer",
+						     "nvidia,tegra210-amixer";
+					reg = <0x0 0x290bb00 0x0 0x800>;
+					sound-name-prefix = "MIXER1";
+					status = "disabled";
+				};
+
+				tegra_admaif: admaif@290f000 {
+					compatible = "nvidia,tegra234-admaif",
+						     "nvidia,tegra186-admaif";
+					reg = <0x0 0x0290f000 0x0 0x1000>;
+					dmas = <&adma 1>, <&adma 1>,
+					       <&adma 2>, <&adma 2>,
+					       <&adma 3>, <&adma 3>,
+					       <&adma 4>, <&adma 4>,
+					       <&adma 5>, <&adma 5>,
+					       <&adma 6>, <&adma 6>,
+					       <&adma 7>, <&adma 7>,
+					       <&adma 8>, <&adma 8>,
+					       <&adma 9>, <&adma 9>,
+					       <&adma 10>, <&adma 10>,
+					       <&adma 11>, <&adma 11>,
+					       <&adma 12>, <&adma 12>,
+					       <&adma 13>, <&adma 13>,
+					       <&adma 14>, <&adma 14>,
+					       <&adma 15>, <&adma 15>,
+					       <&adma 16>, <&adma 16>,
+					       <&adma 17>, <&adma 17>,
+					       <&adma 18>, <&adma 18>,
+					       <&adma 19>, <&adma 19>,
+					       <&adma 20>, <&adma 20>;
+					dma-names = "rx1", "tx1",
+						    "rx2", "tx2",
+						    "rx3", "tx3",
+						    "rx4", "tx4",
+						    "rx5", "tx5",
+						    "rx6", "tx6",
+						    "rx7", "tx7",
+						    "rx8", "tx8",
+						    "rx9", "tx9",
+						    "rx10", "tx10",
+						    "rx11", "tx11",
+						    "rx12", "tx12",
+						    "rx13", "tx13",
+						    "rx14", "tx14",
+						    "rx15", "tx15",
+						    "rx16", "tx16",
+						    "rx17", "tx17",
+						    "rx18", "tx18",
+						    "rx19", "tx19",
+						    "rx20", "tx20";
+					interconnects = <&mc TEGRA234_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu_niso0 TEGRA234_SID_APE>;
+					status = "disabled";
+				};
+
+				tegra_asrc: asrc@2910000 {
+					compatible = "nvidia,tegra234-asrc",
+						     "nvidia,tegra186-asrc";
+					reg = <0x0 0x2910000 0x0 0x2000>;
+					sound-name-prefix = "ASRC1";
+					status = "disabled";
+				};
+			};
+
+			adma: dma-controller@2930000 {
+				compatible = "nvidia,tegra234-adma",
+					     "nvidia,tegra186-adma";
+				reg = <0x0 0x02930000 0x0 0x20000>;
+				interrupt-parent = <&agic>;
+				interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				clock-names = "d_audio";
+				status = "disabled";
+			};
+
+			agic: interrupt-controller@2a40000 {
+				compatible = "nvidia,tegra234-agic",
+					     "nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x0 0x02a41000 0x0 0x1000>,
+				      <0x0 0x02a42000 0x0 0x2000>;
+				interrupts = <GIC_SPI 145
+					      (GIC_CPU_MASK_SIMPLE(4) |
+					       IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA234_CLK_APE>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+		};
+
+		mc: memory-controller@2c00000 {
+			compatible = "nvidia,tegra234-mc";
+			reg = <0x0 0x02c00000 0x0 0x10000>,   /* MC-SID */
+			      <0x0 0x02c10000 0x0 0x10000>,   /* MC Broadcast*/
+			      <0x0 0x02c20000 0x0 0x10000>,   /* MC0 */
+			      <0x0 0x02c30000 0x0 0x10000>,   /* MC1 */
+			      <0x0 0x02c40000 0x0 0x10000>,   /* MC2 */
+			      <0x0 0x02c50000 0x0 0x10000>,   /* MC3 */
+			      <0x0 0x02b80000 0x0 0x10000>,   /* MC4 */
+			      <0x0 0x02b90000 0x0 0x10000>,   /* MC5 */
+			      <0x0 0x02ba0000 0x0 0x10000>,   /* MC6 */
+			      <0x0 0x02bb0000 0x0 0x10000>,   /* MC7 */
+			      <0x0 0x01700000 0x0 0x10000>,   /* MC8 */
+			      <0x0 0x01710000 0x0 0x10000>,   /* MC9 */
+			      <0x0 0x01720000 0x0 0x10000>,   /* MC10 */
+			      <0x0 0x01730000 0x0 0x10000>,   /* MC11 */
+			      <0x0 0x01740000 0x0 0x10000>,   /* MC12 */
+			      <0x0 0x01750000 0x0 0x10000>,   /* MC13 */
+			      <0x0 0x01760000 0x0 0x10000>,   /* MC14 */
+			      <0x0 0x01770000 0x0 0x10000>;   /* MC15 */
+			reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3",
+				    "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10",
+				    "ch11", "ch12", "ch13", "ch14", "ch15";
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
+			status = "okay";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x01700000 0x0 0x01700000 0x0 0x100000>,
+				 <0x0 0x02b80000 0x0 0x02b80000 0x0 0x040000>,
+				 <0x0 0x02c00000 0x0 0x02c00000 0x0 0x100000>;
+
+			/*
+			 * Bit 39 of addresses passing through the memory
+			 * controller selects the XBAR format used when memory
+			 * is accessed. This is used to transparently access
+			 * memory in the XBAR format used by the discrete GPU
+			 * (bit 39 set) or Tegra (bit 39 clear).
+			 *
+			 * As a consequence, the operating system must ensure
+			 * that bit 39 is never used implicitly, for example
+			 * via an I/O virtual address mapping of an IOMMU. If
+			 * devices require access to the XBAR switch, their
+			 * drivers must set this bit explicitly.
+			 *
+			 * Limit the DMA range for memory clients to [38:0].
+			 */
+			dma-ranges = <0x0 0x0 0x0 0x0 0x80 0x0>;
+
+			emc: external-memory-controller@2c60000 {
+				compatible = "nvidia,tegra234-emc";
+				reg = <0x0 0x02c60000 0x0 0x90000>,
+				      <0x0 0x01780000 0x0 0x80000>;
+				interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_EMC>;
+				clock-names = "emc";
+				status = "okay";
+
+				#interconnect-cells = <0>;
+
+				nvidia,bpmp = <&bpmp>;
+			};
+		};
+
+		uarta: serial@3100000 {
+			compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_UARTA>;
+			resets = <&bpmp TEGRA234_RESET_UARTA>;
+			status = "disabled";
+		};
+
+		uarte: serial@3140000 {
+			compatible = "nvidia,tegra234-uart", "nvidia,tegra20-uart";
+			reg = <0x0 0x03140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_UARTE>;
+			resets = <&bpmp TEGRA234_RESET_UARTE>;
+			status = "disabled";
+		};
+
+		gen1_i2c: i2c@3160000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x3160000 0x0 0x100>;
+			status = "disabled";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C1
+				  &bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C1>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C1>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 21>, <&gpcdma 21>;
+			dma-names = "rx", "tx";
+		};
+
+		cam_i2c: i2c@3180000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x3180000 0x0 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C3
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C3>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 23>, <&gpcdma 23>;
+			dma-names = "rx", "tx";
+		};
+
+		dp_aux_ch1_i2c: i2c@3190000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x3190000 0x0 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C4
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C4>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C4>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 26>, <&gpcdma 26>;
+			dma-names = "rx", "tx";
+		};
+
+		dp_aux_ch0_i2c: i2c@31b0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x31b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C6
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C6>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C6>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 30>, <&gpcdma 30>;
+			dma-names = "rx", "tx";
+		};
+
+		dp_aux_ch2_i2c: i2c@31c0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x31c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C7
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C7>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C7>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 27>, <&gpcdma 27>;
+			dma-names = "rx", "tx";
+		};
+
+		uarti: serial@31d0000 {
+			compatible = "arm,sbsa-uart";
+			reg = <0x0 0x31d0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dp_aux_ch3_i2c: i2c@31e0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0x31e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C9
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C9>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C9>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 31>, <&gpcdma 31>;
+			dma-names = "rx", "tx";
+		};
+
+		spi@3210000 {
+			compatible = "nvidia,tegra210-spi";
+			reg = <0x0 0x03210000 0x0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_SPI1>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_SPI1>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "spi";
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			resets = <&bpmp TEGRA234_RESET_SPI1>;
+			reset-names = "spi";
+			dmas = <&gpcdma 15>, <&gpcdma 15>;
+			dma-names = "rx", "tx";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		spi@3230000 {
+			compatible = "nvidia,tegra210-spi";
+			reg = <0x0 0x03230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_SPI3>;
+			clock-names = "spi";
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_SPI3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_SPI3>;
+			reset-names = "spi";
+			dmas = <&gpcdma 17>, <&gpcdma 17>;
+			dma-names = "rx", "tx";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		spi@3270000 {
+			compatible = "nvidia,tegra234-qspi";
+			reg = <0x0 0x3270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>,
+				 <&bpmp TEGRA234_CLK_QSPI0_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA234_RESET_QSPI0>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@3280000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x3280000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM1>;
+			resets = <&bpmp TEGRA234_RESET_PWM1>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm2: pwm@3290000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x3290000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM2>;
+			resets = <&bpmp TEGRA234_RESET_PWM2>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm3: pwm@32a0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32a0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM3>;
+			resets = <&bpmp TEGRA234_RESET_PWM3>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm5: pwm@32c0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32c0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM5>;
+			resets = <&bpmp TEGRA234_RESET_PWM5>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm6: pwm@32d0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32d0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM6>;
+			resets = <&bpmp TEGRA234_RESET_PWM6>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm7: pwm@32e0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32e0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM7>;
+			resets = <&bpmp TEGRA234_RESET_PWM7>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pwm8: pwm@32f0000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0x32f0000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM8>;
+			resets = <&bpmp TEGRA234_RESET_PWM8>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		spi@3300000 {
+			compatible = "nvidia,tegra234-qspi";
+			reg = <0x0 0x3300000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>,
+				 <&bpmp TEGRA234_CLK_QSPI1_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA234_RESET_QSPI1>;
+			status = "disabled";
+		};
+
+		mmc@3400000 {
+			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+			reg = <0x0 0x03400000 0x0 0x20000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC1>,
+					  <&bpmp TEGRA234_CLK_PLLC4_MUXED>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4_MUXED>,
+						 <&bpmp TEGRA234_CLK_PLLC4_VCO_DIV2>;
+			resets = <&bpmp TEGRA234_RESET_SDMMC1>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC1A>;
+			pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+			pinctrl-0 = <&sdmmc1_3v3>;
+			pinctrl-1 = <&sdmmc1_1v8>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x06>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+			nvidia,pad-autocal-pull-up-offset-sdr104 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-sdr104 = <0x00>;
+			nvidia,default-tap = <14>;
+			nvidia,default-trim = <0x8>;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-ddr50;
+			sd-uhs-sdr104;
+			status = "disabled";
+		};
+
+		mmc@3460000 {
+			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
+			reg = <0x0 0x03460000 0x0 0x20000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+				 <&bpmp TEGRA234_CLK_SDMMC_LEGACY_TM>;
+			clock-names = "sdhci", "tmclk";
+			assigned-clocks = <&bpmp TEGRA234_CLK_SDMMC4>,
+					  <&bpmp TEGRA234_CLK_PLLC4>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLC4>;
+			resets = <&bpmp TEGRA234_RESET_SDMMC4>;
+			reset-names = "sdhci";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC4>;
+			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
+			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x0a>;
+			nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x0a>;
+			nvidia,default-tap = <0x8>;
+			nvidia,default-trim = <0x14>;
+			nvidia,dqs-trim = <40>;
+			supports-cqe;
+			status = "disabled";
+		};
+
+		hda@3510000 {
+			compatible = "nvidia,tegra234-hda";
+			reg = <0x0 0x3510000 0x0 0x10000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_AZA_BIT>,
+				 <&bpmp TEGRA234_CLK_AZA_2XBIT>;
+			clock-names = "hda", "hda2codec_2x";
+			resets = <&bpmp TEGRA234_RESET_HDA>,
+				 <&bpmp TEGRA234_RESET_HDACODEC>;
+			reset-names = "hda", "hda2codec_2x";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_HDA>;
+			status = "disabled";
+		};
+
+		xusb_padctl: padctl@3520000 {
+			compatible = "nvidia,tegra234-xusb-padctl";
+			reg = <0x0 0x03520000 0x0 0x20000>,
+			      <0x0 0x03540000 0x0 0x10000>;
+			reg-names = "padctl", "ao";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&bpmp TEGRA234_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA234_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb@3550000 {
+			compatible = "nvidia,tegra234-xudc";
+			reg = <0x0 0x03550000 0x0 0x8000>,
+			      <0x0 0x03558000 0x0 0x8000>;
+			reg-names = "base", "fpci";
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_DEV>,
+				 <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_FS>;
+			clock-names = "dev", "ss", "ss_src", "fs_src";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_XUSB_DEVW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_XUSB_DEV>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBB>,
+					<&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "dev", "ss";
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		usb@3610000 {
+			compatible = "nvidia,tegra234-xusb";
+			reg = <0x0 0x03610000 0x0 0x40000>,
+			      <0x0 0x03600000 0x0 0x10000>,
+			      <0x0 0x03650000 0x0 0x10000>;
+			reg-names = "hcd", "fpci", "bar2";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_SS>,
+				 <&bpmp TEGRA234_CLK_CLK_M>,
+				 <&bpmp TEGRA234_CLK_XUSB_FS>,
+				 <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+				 <&bpmp TEGRA234_CLK_CLK_M>,
+				 <&bpmp TEGRA234_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		fuse@3810000 {
+			compatible = "nvidia,tegra234-efuse";
+			reg = <0x0 0x03810000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_FUSE>;
+			clock-names = "fuse";
+		};
+
+		hte_lic: hardware-timestamp@3aa0000 {
+			compatible = "nvidia,tegra234-gte-lic";
+			reg = <0x0 0x3aa0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			#timestamp-cells = <1>;
+		};
+
+		hsp_top0: hsp@3c00000 {
+			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
+			reg = <0x0 0x03c00000 0x0 0xa0000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "doorbell", "shared0", "shared1", "shared2",
+					  "shared3", "shared4", "shared5", "shared6",
+					  "shared7";
+			#mbox-cells = <2>;
+		};
+
+		p2u_hsio_0: phy@3e00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e00000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_1: phy@3e10000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e10000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_2: phy@3e20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_3: phy@3e30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_4: phy@3e40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_5: phy@3e50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e50000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_6: phy@3e60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e60000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_hsio_7: phy@3e70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e70000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_0: phy@3e90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03e90000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_1: phy@3ea0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ea0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_2: phy@3eb0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03eb0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_3: phy@3ec0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ec0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_4: phy@3ed0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ed0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_5: phy@3ee0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ee0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_6: phy@3ef0000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03ef0000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_nvhs_7: phy@3f00000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f00000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_0: phy@3f20000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f20000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_1: phy@3f30000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f30000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_2: phy@3f40000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f40000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_3: phy@3f50000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f50000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_4: phy@3f60000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f60000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_5: phy@3f70000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f70000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_6: phy@3f80000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f80000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		p2u_gbe_7: phy@3f90000 {
+			compatible = "nvidia,tegra234-p2u";
+			reg = <0x0 0x03f90000 0x0 0x10000>;
+			reg-names = "ctl";
+
+			#phy-cells = <0>;
+		};
+
+		ethernet@6800000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06800000 0x0 0x10000>,
+			      <0x0 0x06810000 0x0 0x10000>,
+			      <0x0 0x068a0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+			status = "disabled";
+		};
+
+		ethernet@6900000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06900000 0x0 0x10000>,
+			      <0x0 0x06910000 0x0 0x10000>,
+			      <0x0 0x069a0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE1_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE1_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE1_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE1_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE1_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE1_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE1_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE1_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE1_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE1_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEBRD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBEBWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEB>;
+			status = "disabled";
+		};
+
+		ethernet@6a00000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06a00000 0x0 0x10000>,
+			      <0x0 0x06a10000 0x0 0x10000>,
+			      <0x0 0x06aa0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE2_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE2_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE2_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE2_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE2_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE2_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE2_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE2_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE2_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE2_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBECRD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBECWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF2>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEC>;
+			status = "disabled";
+		};
+
+		ethernet@6b00000 {
+			compatible = "nvidia,tegra234-mgbe";
+			reg = <0x0 0x06b00000 0x0 0x10000>,
+			      <0x0 0x06b10000 0x0 0x10000>,
+			      <0x0 0x06ba0000 0x0 0x10000>;
+			reg-names = "hypervisor", "mac", "xpcs";
+			interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			clocks = <&bpmp TEGRA234_CLK_MGBE3_APP>,
+				 <&bpmp TEGRA234_CLK_MGBE3_MAC>,
+				 <&bpmp TEGRA234_CLK_MGBE3_MAC_DIVIDER>,
+				 <&bpmp TEGRA234_CLK_MGBE3_PTP_REF>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT_M>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE3_TX>,
+				 <&bpmp TEGRA234_CLK_MGBE3_EEE_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_INPUT>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_PCS_M>,
+				 <&bpmp TEGRA234_CLK_MGBE3_RX_PCS>,
+				 <&bpmp TEGRA234_CLK_MGBE3_TX_PCS>;
+			clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+				      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+				      "rx-pcs", "tx-pcs";
+			resets = <&bpmp TEGRA234_RESET_MGBE3_MAC>,
+				 <&bpmp TEGRA234_RESET_MGBE3_PCS>;
+			reset-names = "mac", "pcs";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEDRD &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_MGBEDWR &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF3>;
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBED>;
+			status = "disabled";
+		};
+
+		smmu_niso1: iommu@8000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x8000000 0x0 0x1000000>,
+			      <0x0 0x7000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		sce-fabric@b600000 {
+			compatible = "nvidia,tegra234-sce-fabric";
+			reg = <0x0 0xb600000 0x0 0x40000>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		rce-fabric@be00000 {
+			compatible = "nvidia,tegra234-rce-fabric";
+			reg = <0x0 0xbe00000 0x0 0x40000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		hsp_aon: hsp@c150000 {
+			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
+			reg = <0x0 0x0c150000 0x0 0x90000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * Shared interrupt 0 is routed only to AON/SPE, so
+			 * we only have 4 shared interrupts for the CCPLEX.
+			 */
+			interrupt-names = "shared1", "shared2", "shared3", "shared4";
+			#mbox-cells = <2>;
+		};
+
+		hte_aon: hardware-timestamp@c1e0000 {
+			compatible = "nvidia,tegra234-gte-aon";
+			reg = <0x0 0xc1e0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,int-threshold = <1>;
+			nvidia,gpio-controller = <&gpio_aon>;
+			#timestamp-cells = <1>;
+		};
+
+		gen2_i2c: i2c@c240000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0xc240000 0x0 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C2
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C2>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_I2C2>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 22>, <&gpcdma 22>;
+			dma-names = "rx", "tx";
+		};
+
+		gen8_i2c: i2c@c250000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x0 0xc250000 0x0 0x100>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C8
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C8>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_I2C8>;
+			reset-names = "i2c";
+			dmas = <&gpcdma 0>, <&gpcdma 0>;
+			dma-names = "rx", "tx";
+		};
+
+		spi@c260000 {
+			compatible = "nvidia,tegra210-spi";
+			reg = <0x0 0x0c260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&bpmp TEGRA234_CLK_SPI2>;
+			clock-names = "spi";
+			iommus = <&smmu_niso0 TEGRA234_SID_GPCDMA>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_SPI2>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_SPI2>;
+			reset-names = "spi";
+			dmas = <&gpcdma 19>, <&gpcdma 19>;
+			dma-names = "rx", "tx";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		rtc@c2a0000 {
+			compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc";
+			reg = <0x0 0x0c2a0000 0x0 0x10000>;
+			interrupt-parent = <&pmc>;
+			interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_CLK_32K>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		gpio_aon: gpio@c2f0000 {
+			compatible = "nvidia,tegra234-gpio-aon";
+			reg-names = "security", "gpio";
+			reg = <0x0 0x0c2f0000 0x0 0x1000>,
+			      <0x0 0x0c2f1000 0x0 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinmux_aon 0 0 32>;
+		};
+
+		pinmux_aon: pinmux@c300000 {
+			compatible = "nvidia,tegra234-pinmux-aon";
+			reg = <0x0 0xc300000 0x0 0x4000>;
+		};
+
+		pwm4: pwm@c340000 {
+			compatible = "nvidia,tegra234-pwm", "nvidia,tegra194-pwm";
+			reg = <0x0 0xc340000 0x0 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM4>;
+			resets = <&bpmp TEGRA234_RESET_PWM4>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
+		pmc: pmc@c360000 {
+			compatible = "nvidia,tegra234-pmc";
+			reg = <0x0 0x0c360000 0x0 0x10000>,
+			      <0x0 0x0c370000 0x0 0x10000>,
+			      <0x0 0x0c380000 0x0 0x10000>,
+			      <0x0 0x0c390000 0x0 0x10000>,
+			      <0x0 0x0c3a0000 0x0 0x10000>;
+			reg-names = "pmc", "wake", "aotag", "scratch", "misc";
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			sdmmc1_1v8: sdmmc1-1v8 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc1_3v3: sdmmc1-3v3 {
+				pins = "sdmmc1-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+
+			sdmmc3_1v8: sdmmc3-1v8 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+			};
+
+			sdmmc3_3v3: sdmmc3-3v3 {
+				pins = "sdmmc3-hv";
+				power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+			};
+		};
+
+		aon-fabric@c600000 {
+			compatible = "nvidia,tegra234-aon-fabric";
+			reg = <0x0 0xc600000 0x0 0x40000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		bpmp-fabric@d600000 {
+			compatible = "nvidia,tegra234-bpmp-fabric";
+			reg = <0x0 0xd600000 0x0 0x40000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		dce-fabric@de00000 {
+			compatible = "nvidia,tegra234-sce-fabric";
+			reg = <0x0 0xde00000 0x0 0x40000>;
+			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		ccplex@e000000 {
+			compatible = "nvidia,tegra234-ccplex-cluster";
+			reg = <0x0 0x0e000000 0x0 0x5ffff>;
+			nvidia,bpmp = <&bpmp>;
+			status = "okay";
+		};
+
+		gic: interrupt-controller@f400000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f400000 0x0 0x010000>, /* GICD */
+			      <0x0 0x0f440000 0x0 0x200000>; /* GICR */
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		smmu_iso: iommu@10000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x10000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		smmu_niso0: iommu@12000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x0 0x12000000 0x0 0x1000000>,
+			      <0x0 0x11000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		cbb-fabric@13a00000 {
+			compatible = "nvidia,tegra234-cbb-fabric";
+			reg = <0x0 0x13a00000 0x0 0x400000>;
+			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			compatible = "nvidia,tegra234-host1x";
+			reg = <0x0 0x13e00000 0x0 0x10000>,
+			      <0x0 0x13e10000 0x0 0x10000>,
+			      <0x0 0x13e40000 0x0 0x10000>;
+			reg-names = "common", "hypervisor", "vm";
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "syncpt0", "syncpt1", "syncpt2", "syncpt3", "syncpt4",
+					  "syncpt5", "syncpt6", "syncpt7", "host1x";
+			clocks = <&bpmp TEGRA234_CLK_HOST1X>;
+			clock-names = "host1x";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x14800000 0x0 0x14800000 0x0 0x02000000>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HOST1XDMAR &emc>;
+			interconnect-names = "dma-mem";
+			iommus = <&smmu_niso1 TEGRA234_SID_HOST1X>;
+			dma-coherent;
+
+			/* Context isolation domains */
+			iommu-map = <0 &smmu_niso0 TEGRA234_SID_HOST1X_CTX0 1>,
+				    <1 &smmu_niso0 TEGRA234_SID_HOST1X_CTX1 1>,
+				    <2 &smmu_niso0 TEGRA234_SID_HOST1X_CTX2 1>,
+				    <3 &smmu_niso0 TEGRA234_SID_HOST1X_CTX3 1>,
+				    <4 &smmu_niso0 TEGRA234_SID_HOST1X_CTX4 1>,
+				    <5 &smmu_niso0 TEGRA234_SID_HOST1X_CTX5 1>,
+				    <6 &smmu_niso0 TEGRA234_SID_HOST1X_CTX6 1>,
+				    <7 &smmu_niso0 TEGRA234_SID_HOST1X_CTX7 1>,
+				    <8 &smmu_niso1 TEGRA234_SID_HOST1X_CTX0 1>,
+				    <9 &smmu_niso1 TEGRA234_SID_HOST1X_CTX1 1>,
+				    <10 &smmu_niso1 TEGRA234_SID_HOST1X_CTX2 1>,
+				    <11 &smmu_niso1 TEGRA234_SID_HOST1X_CTX3 1>,
+				    <12 &smmu_niso1 TEGRA234_SID_HOST1X_CTX4 1>,
+				    <13 &smmu_niso1 TEGRA234_SID_HOST1X_CTX5 1>,
+				    <14 &smmu_niso1 TEGRA234_SID_HOST1X_CTX6 1>,
+				    <15 &smmu_niso1 TEGRA234_SID_HOST1X_CTX7 1>;
+
+			vic@15340000 {
+				compatible = "nvidia,tegra234-vic";
+				reg = <0x0 0x15340000 0x0 0x00040000>;
+				interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&bpmp TEGRA234_CLK_VIC>;
+				clock-names = "vic";
+				resets = <&bpmp TEGRA234_RESET_VIC>;
+				reset-names = "vic";
+
+				power-domains = <&bpmp TEGRA234_POWER_DOMAIN_VIC>;
+				interconnects = <&mc TEGRA234_MEMORY_CLIENT_VICSRD &emc>,
+						<&mc TEGRA234_MEMORY_CLIENT_VICSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu_niso1 TEGRA234_SID_VIC>;
+				dma-coherent;
+			};
+
+			nvdec@15480000 {
+				compatible = "nvidia,tegra234-nvdec";
+				reg = <0x0 0x15480000 0x0 0x00040000>;
+				clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+					 <&bpmp TEGRA234_CLK_FUSE>,
+					 <&bpmp TEGRA234_CLK_TSEC_PKA>;
+				clock-names = "nvdec", "fuse", "tsec_pka";
+				resets = <&bpmp TEGRA234_RESET_NVDEC>;
+				reset-names = "nvdec";
+				power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+				interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+						<&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+				interconnect-names = "dma-mem", "write";
+				iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+				dma-coherent;
+
+				nvidia,memory-controller = <&mc>;
+
+				/*
+				 * Placeholder values that firmware needs to update with the real
+				 * offsets parsed from the microcode headers.
+				 */
+				nvidia,bl-manifest-offset = <0>;
+				nvidia,bl-data-offset = <0>;
+				nvidia,bl-code-offset = <0>;
+				nvidia,os-manifest-offset = <0>;
+				nvidia,os-data-offset = <0>;
+				nvidia,os-code-offset = <0>;
+
+				/*
+				 * Firmware needs to set this to "okay" once the above values have
+				 * been updated.
+				 */
+				status = "disabled";
+			};
+		};
+
+		pcie@140a0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CA>;
+			reg = <0x00 0x140a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2a000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x2a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x35 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <8>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C8_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_8_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_8>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 8>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x32 0x40000000 0x32 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x35 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x2a100000 0x00 0x2a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE8AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE8AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE8 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@140c0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CB>;
+			reg = <0x00 0x140c0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2c000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x2c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x38 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <9>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C9_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_9_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_9>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 9>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x35 0x40000000 0x35 0x40000000 0x2 0xc0000000>, /* prefetchable memory (11264 MB) */
+				 <0x02000000 0x0  0x40000000 0x38 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x2c100000 0x00 0x2c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE9AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE9AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE9 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@140e0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>;
+			reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2e000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x3b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <10>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_10>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 10>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x38 0x40000000 0x38 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x3b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x2e100000 0x00 0x2e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@140e0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4CC>;
+			reg = <0x00 0x140e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x2e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x2e080000 0x0 0x00040000>, /* DBI space (256K)           */
+			      <0x38 0x40000000 0x3 0x00000000>; /* Address Space (12G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <4>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C10_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_10_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_10>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 10>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE10AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE10AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE10 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14100000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x30080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x20 0xb0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			num-viewport = <8>;
+			linux,pci-domain = <1>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C1_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_1_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_1>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 1>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x20 0x80000000 0x20 0x80000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
+				 <0x02000000 0x0  0x40000000 0x20 0xa8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x30100000 0x00 0x30100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE1R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE1W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE1 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14120000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x32080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x20 0xf0000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			num-viewport = <8>;
+			linux,pci-domain = <2>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C2_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_2_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_2>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 2>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x20 0xc0000000 0x20 0xc0000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
+				 <0x02000000 0x0  0x40000000 0x20 0xe8000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x32100000 0x00 0x32100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE2AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE2AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE2 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14140000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX1A>;
+			reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x34080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x21 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <1>;
+			num-viewport = <8>;
+			linux,pci-domain = <3>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C3_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_3_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_3>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 3>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x21 0x00000000 0x21 0x00000000 0x0 0x28000000>, /* prefetchable memory (640 MB) */
+				 <0x02000000 0x0  0x40000000 0x21 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x34100000 0x00 0x34100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE3R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE3W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE3 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14160000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+			reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <4>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 4>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE4R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE4W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE4 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@14180000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BA>;
+			reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x27 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <0>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX0_C0_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX0_CORE_0_APB>,
+				 <&bpmp TEGRA234_RESET_PEX0_CORE_0>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 0>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x24 0x40000000 0x24 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x27 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x38100000 0x00 0x38100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE0R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE0W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE0 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@141a0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x2b 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			num-viewport = <8>;
+			linux,pci-domain = <5>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x28 0x00000000 0x28 0x00000000 0x3 0x28000000>, /* prefetchable memory (12928 MB) */
+				 <0x02000000 0x0  0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@141a0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+			reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <8>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 5>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE5 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@141c0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3c000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3c080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x2e 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			num-viewport = <8>;
+			linux,pci-domain = <6>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_6>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 6>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x2b 0x40000000 0x2b 0x40000000 0x2 0xe8000000>, /* prefetchable memory (11904 MB) */
+				 <0x02000000 0x0  0x40000000 0x2e 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x3c100000 0x00 0x3c100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@141c0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4A>;
+			reg = <0x00 0x141c0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3c040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3c080000 0x0 0x00040000>, /* DBI space (256K)           */
+			      <0x2b 0x40000000 0x3 0x00000000>; /* Address Space (12G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <4>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX1_C6_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX1_CORE_6_APB>,
+				 <&bpmp TEGRA234_RESET_PEX1_CORE_6>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 6>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE6AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE6AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso0 TEGRA234_SID_PCIE6 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie@141e0000 {
+			compatible = "nvidia,tegra234-pcie";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3e000000 0x0 0x00040000>, /* configuration space (256K) */
+			      <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3e080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+			      <0x32 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+			reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			num-viewport = <8>;
+			linux,pci-domain = <7>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_7>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+			interrupt-names = "intr", "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+			nvidia,bpmp = <&bpmp 7>;
+
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			bus-range = <0x0 0xff>;
+
+			ranges = <0x43000000 0x30 0x00000000 0x30 0x00000000 0x2 0x28000000>, /* prefetchable memory (8832 MB) */
+				 <0x02000000 0x0  0x40000000 0x32 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */
+				 <0x01000000 0x0  0x3e100000 0x00 0x3e100000 0x0 0x00100000>; /* downstream I/O (1 MB) */
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie-ep@141e0000 {
+			compatible = "nvidia,tegra234-pcie-ep";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8B>;
+			reg = <0x00 0x141e0000 0x0 0x00020000>, /* appl registers (128K)      */
+			      <0x00 0x3e040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+			      <0x00 0x3e080000 0x0 0x00040000>, /* DBI space (256K)           */
+			      <0x2e 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+			reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+			num-lanes = <8>;
+
+			clocks = <&bpmp TEGRA234_CLK_PEX2_C7_CORE>;
+			clock-names = "core";
+
+			resets = <&bpmp TEGRA234_RESET_PEX2_CORE_7_APB>,
+				 <&bpmp TEGRA234_RESET_PEX2_CORE_7>;
+			reset-names = "apb", "core";
+
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
+			interrupt-names = "intr";
+
+			nvidia,bpmp = <&bpmp 7>;
+
+			nvidia,enable-ext-refclk;
+			nvidia,aspm-cmrt-us = <60>;
+			nvidia,aspm-pwr-on-t-us = <20>;
+			nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE7AR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_PCIE7AW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommu-map = <0x0 &smmu_niso1 TEGRA234_SID_PCIE7 0x1000>;
+			iommu-map-mask = <0x0>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+	};
+
+	sram@40000000 {
+		compatible = "nvidia,tegra234-sysram", "mmio-sram";
+		reg = <0x0 0x40000000 0x0 0x80000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40000000 0x80000>;
+
+		no-memory-wc;
+
+		cpu_bpmp_tx: sram@70000 {
+			reg = <0x70000 0x1000>;
+			label = "cpu-bpmp-tx";
+			pool;
+		};
+
+		cpu_bpmp_rx: sram@71000 {
+			reg = <0x71000 0x1000>;
+			label = "cpu-bpmp-rx";
+			pool;
+		};
+	};
+
+	bpmp: bpmp {
+		compatible = "nvidia,tegra234-bpmp", "nvidia,tegra186-bpmp";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+				    TEGRA_HSP_DB_MASTER_BPMP>;
+		shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA234_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu_niso1 TEGRA234_SID_BPMP>;
+
+		bpmp_i2c: i2c {
+			compatible = "nvidia,tegra186-bpmp-i2c";
+			nvidia,bpmp-bus-id = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		bpmp_thermal: thermal {
+			compatible = "nvidia,tegra186-bpmp-thermal";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0_0: cpu@0 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00000>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_0>;
+		};
+
+		cpu0_1: cpu@100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00100>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_1>;
+		};
+
+		cpu0_2: cpu@200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00200>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_2>;
+		};
+
+		cpu0_3: cpu@300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x00300>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl0_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER0 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c0_3>;
+		};
+
+		cpu1_0: cpu@10000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10000>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_0>;
+		};
+
+		cpu1_1: cpu@10100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10100>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_1>;
+		};
+
+		cpu1_2: cpu@10200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10200>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_2>;
+		};
+
+		cpu1_3: cpu@10300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x10300>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl1_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER1 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c1_3>;
+		};
+
+		cpu2_0: cpu@20000 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20000>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_0>;
+		};
+
+		cpu2_1: cpu@20100 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20100>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_1>;
+		};
+
+		cpu2_2: cpu@20200 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20200>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_2>;
+		};
+
+		cpu2_3: cpu@20300 {
+			compatible = "arm,cortex-a78";
+			device_type = "cpu";
+			reg = <0x20300>;
+
+			enable-method = "psci";
+
+			operating-points-v2 = <&cl2_opp_tbl>;
+			interconnects = <&mc TEGRA_ICC_MC_CPU_CLUSTER2 &emc>;
+
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2c2_3>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0_0>;
+				};
+
+				core1 {
+					cpu = <&cpu0_1>;
+				};
+
+				core2 {
+					cpu = <&cpu0_2>;
+				};
+
+				core3 {
+					cpu = <&cpu0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu1_0>;
+				};
+
+				core1 {
+					cpu = <&cpu1_1>;
+				};
+
+				core2 {
+					cpu = <&cpu1_2>;
+				};
+
+				core3 {
+					cpu = <&cpu1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu2_0>;
+				};
+
+				core1 {
+					cpu = <&cpu2_1>;
+				};
+
+				core2 {
+					cpu = <&cpu2_2>;
+				};
+
+				core3 {
+					cpu = <&cpu2_3>;
+				};
+			};
+		};
+
+		l2c0_0: l2-cache00 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_1: l2-cache01 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_2: l2-cache02 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c0_3: l2-cache03 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c0>;
+		};
+
+		l2c1_0: l2-cache10 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_1: l2-cache11 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_2: l2-cache12 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c1_3: l2-cache13 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c1>;
+		};
+
+		l2c2_0: l2-cache20 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_1: l2-cache21 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_2: l2-cache22 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l2c2_3: l2-cache23 {
+			compatible = "cache";
+			cache-size = <262144>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-unified;
+			cache-level = <2>;
+			next-level-cache = <&l3c2>;
+		};
+
+		l3c0: l3-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <3>;
+		};
+
+		l3c1: l3-cache1 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <3>;
+		};
+
+		l3c2: l3-cache2 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <2097152>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <3>;
+		};
+	};
+
+	dsu-pmu0 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu0_0>, <&cpu0_1>, <&cpu0_2>, <&cpu0_3>;
+	};
+
+	dsu-pmu1 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu1_0>, <&cpu1_1>, <&cpu1_2>, <&cpu1_3>;
+	};
+
+	dsu-pmu2 {
+		compatible = "arm,dsu-pmu";
+		interrupts = <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		cpus = <&cpu2_0>, <&cpu2_1>, <&cpu2_2>, <&cpu2_3>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a78-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		status = "okay";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
+	tcu: serial {
+		compatible = "nvidia,tegra234-tcu", "nvidia,tegra194-tcu";
+		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_RX(0)>,
+			 <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM TEGRA_HSP_SM_TX(1)>;
+		mbox-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA234_CLK_PLLA>,
+			 <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA234_CLK_PLLA>,
+				  <&bpmp TEGRA234_CLK_PLLA_OUT0>,
+				  <&bpmp TEGRA234_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA234_CLK_PLLA>,
+					 <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CPU>;
+			status = "disabled";
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_GPU>;
+			status = "disabled";
+		};
+
+		cv0-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV0>;
+			status = "disabled";
+		};
+
+		cv1-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV1>;
+			status = "disabled";
+		};
+
+		cv2-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_CV2>;
+			status = "disabled";
+		};
+
+		soc0-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC0>;
+			status = "disabled";
+		};
+
+		soc1-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC1>;
+			status = "disabled";
+		};
+
+		soc2-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_SOC2>;
+			status = "disabled";
+		};
+
+		tj-thermal {
+			thermal-sensors = <&{/bpmp/thermal} TEGRA234_BPMP_THERMAL_ZONE_TJ_MAX>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+		always-on;
+	};
+
+	cl0_opp_tbl: opp-table-cluster0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cl0_ch1_opp1: opp-115200000 {
+			  opp-hz = /bits/ 64 <115200000>;
+			  opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp2: opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp3: opp-268800000 {
+			opp-hz = /bits/ 64 <268800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp4: opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp5: opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp6: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp7: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp8: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp9: opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp10: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp11: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp12: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp13: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl0_ch1_opp14: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp15: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp16: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp17: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp18: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl0_ch1_opp19: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp20: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp21: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp22: opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp23: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp24: opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp25: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp26: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl0_ch1_opp27: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl0_ch1_opp28: opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl0_ch1_opp29: opp-2201600000 {
+			opp-hz = /bits/ 64 <2201600000>;
+			opp-peak-kBps = <6400000>;
+		};
+	};
+
+	cl1_opp_tbl: opp-table-cluster1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cl1_ch1_opp1: opp-115200000 {
+			  opp-hz = /bits/ 64 <115200000>;
+			  opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp2: opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp3: opp-268800000 {
+			opp-hz = /bits/ 64 <268800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp4: opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp5: opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp6: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp7: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp8: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp9: opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp10: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp11: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp12: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp13: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl1_ch1_opp14: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp15: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp16: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp17: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp18: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl1_ch1_opp19: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp20: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp21: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp22: opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp23: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp24: opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp25: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp26: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl1_ch1_opp27: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl1_ch1_opp28: opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl1_ch1_opp29: opp-2201600000 {
+			opp-hz = /bits/ 64 <2201600000>;
+			opp-peak-kBps = <6400000>;
+		};
+	};
+
+	cl2_opp_tbl: opp-table-cluster2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cl2_ch1_opp1: opp-115200000 {
+			  opp-hz = /bits/ 64 <115200000>;
+			  opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp2: opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp3: opp-268800000 {
+			opp-hz = /bits/ 64 <268800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp4: opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp5: opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp6: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp7: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp8: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp9: opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp10: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp11: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp12: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp13: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		cl2_ch1_opp14: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp15: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp16: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp17: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp18: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <1632000>;
+		};
+
+		cl2_ch1_opp19: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp20: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp21: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp22: opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp23: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp24: opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp25: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp26: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <3200000>;
+		};
+
+		cl2_ch1_opp27: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl2_ch1_opp28: opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-peak-kBps = <6400000>;
+		};
+
+		cl2_ch1_opp29: opp-2201600000 {
+			opp-hz = /bits/ 64 <2201600000>;
+			opp-peak-kBps = <6400000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
new file mode 100644
index 000000000..2cca20563
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3-camera-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp474.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk10-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp418.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-asus-z00l.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-gplus-fl8005a.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-huawei-g7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8910.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-e7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-grandmax.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt510.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt58.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-tissot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-vince.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-kugo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8956-sony-xperia-loire-suzu.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-huawei-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-msft-lumia-octagon-cityman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-ivy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-karin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-satsuki.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-suzuran.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-oneplus3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-oneplus3t.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-dora.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-kagura.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-sony-xperia-tone-keyaki.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-xiaomi-gemini.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996pro-xiaomi-natrium.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996pro-xiaomi-scorpio.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-fxtec-pro1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-cheeseburger.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-oneplus-dumpling.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-lilac.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-maple.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-homestar-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-kingoftown.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-kb.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r5.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r9.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel360-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel360-wifi.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r2-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-quackingstick-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-quackingstick-r0-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd-pro.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-villager-r1-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-nvme.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-nvme-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c-navigation-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyln.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-lg-judyp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-enchilada.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-oneplus-fajita.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-samsung-starqltechn.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akari.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akatsuki.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-apollo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-ebbg.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium-tianma.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel-sprout.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm6375-sony-xperia-murray-pdx225.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-microsoft-surface-duo.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-bahamut.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-griffin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-csot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-qrd.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
new file mode 100644
index 000000000..c08b4be5c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "apq8016-sbc.dts"
+
+/ {
+	camera_vdddo_1v8: camera-vdddo-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	camera_vdda_2v8: camera-vdda-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	camera_vddd_1v5: camera-vddd-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+};
+
+&camss {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			csiphy0_ep: endpoint {
+				data-lanes = <0 2>;
+				remote-endpoint = <&ov5640_ep>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera_rear@3b {
+		compatible = "ovti,ov5640";
+		reg = <0x3b>;
+
+		powerdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_rear_default>;
+
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "xclk";
+		assigned-clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		assigned-clock-rates = <23880000>;
+
+		DOVDD-supply = <&camera_vdddo_1v8>;
+		AVDD-supply = <&camera_vdda_2v8>;
+		DVDD-supply = <&camera_vddd_1v5>;
+
+		port {
+			ov5640_ep: endpoint {
+				data-lanes = <1 2>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
new file mode 100644
index 000000000..dabe9f42a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
+	compatible = "qcom,apq8016-sbc", "qcom,apq8016";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+		serial1 = &blsp_uart1;
+		usid0 = &pm8916_0;
+		i2c0 = &blsp_i2c2;
+		i2c1 = &blsp_i2c6;
+		i2c3 = &blsp_i2c4;
+		spi0 = &blsp_spi5;
+		spi1 = &blsp_spi3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		ramoops@bff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xbff00000 0x0 0x100000>;
+
+			record-size = <0x20000>;
+			console-size = <0x20000>;
+			ftrace-size = <0x20000>;
+		};
+	};
+
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&msm_key_volp_n_default>;
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&tlmm_leds>,
+			    <&pm8916_gpios_leds>,
+			    <&pm8916_mpps_leds>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "apq8016-sbc:green:user1";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "apq8016-sbc:green:user2";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "apq8016-sbc:green:user3";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "apq8016-sbc:green:user4";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			panic-indicator;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "apq8016-sbc:yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "apq8016-sbc:blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp_i2c2 {
+	/* On Low speed expansion: LS-I2C0 */
+	status = "okay";
+};
+
+&blsp_i2c4 {
+	/* On High speed expansion: HS-I2C2 */
+	status = "okay";
+
+	adv_bridge: bridge@39 {
+		status = "okay";
+
+		compatible = "adi,adv7533";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,dsi-lanes = <4>;
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+
+		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		avdd-supply = <&pm8916_l6>;
+		a2vdd-supply = <&pm8916_l6>;
+		dvdd-supply = <&pm8916_l6>;
+		pvdd-supply = <&pm8916_l6>;
+		v1p2-supply = <&pm8916_l6>;
+		v3p3-supply = <&pm8916_l17>;
+
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
+		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c6 {
+	/* On Low speed expansion: LS-I2C1 */
+	status = "okay";
+};
+
+&blsp_spi3 {
+	/* On High speed expansion: HS-SPI1 */
+	status = "okay";
+};
+
+&blsp_spi5 {
+	/* On Low speed expansion: LS-SPI0 */
+	status = "okay";
+};
+
+&blsp_uart1 {
+	status = "okay";
+	label = "LS-UART0";
+};
+
+&blsp_uart2 {
+	status = "okay";
+	label = "LS-UART1";
+};
+
+&camss {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&adv7533_in>;
+};
+
+&mpss {
+	status = "okay";
+
+	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
+};
+
+&pm8916_codec {
+	status = "okay";
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	/*
+	 * The 96Boards specification expects a 1.8V power rail on the low-speed
+	 * expansion connector that is able to provide at least 0.18W / 100 mA.
+	 * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
+	 * must be specified to ensure the regulators are not put in LPM where they
+	 * would only provide 5 mA.
+	 */
+	pm8916_l15: l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-system-load = <50000>;
+		regulator-allow-set-load;
+		regulator-always-on;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+	pinctrl-names = "default", "sleep";
+	model = "DB410c";
+	audio-routing =
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1";
+
+	quaternary-dai-link {
+		link-name = "ADV7533";
+		cpu {
+			sound-dai = <&lpass MI2S_QUATERNARY>;
+		};
+		codec {
+			sound-dai = <&adv_bridge 0>;
+		};
+	};
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+
+	pinctrl-names = "default", "device";
+	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+	firmware-name = "qcom/apq8016/wcnss.mbn";
+};
+
+&wcnss_ctrl {
+	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+/* Enable CoreSight */
+&cti0 { status = "okay"; };
+&cti1 { status = "okay"; };
+&cti12 { status = "okay"; };
+&cti13 { status = "okay"; };
+&cti14 { status = "okay"; };
+&cti15 { status = "okay"; };
+&debug0 { status = "okay"; };
+&debug1 { status = "okay"; };
+&debug2 { status = "okay"; };
+&debug3 { status = "okay"; };
+&etf { status = "okay"; };
+&etm0 { status = "okay"; };
+&etm1 { status = "okay"; };
+&etm2 { status = "okay"; };
+&etm3 { status = "okay"; };
+&etr { status = "okay"; };
+&funnel0 { status = "okay"; };
+&funnel1 { status = "okay"; };
+&replicator { status = "okay"; };
+&stm { status = "okay"; };
+&tpiu { status = "okay"; };
+
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&blsp_i2c2_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c4_default {
+	drive-strength = <16>;
+};
+
+&blsp_i2c6_default {
+	drive-strength = <16>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "DragonBoard410c"
+ * dated monday, august 31, 2015. Page 5 in particular.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+&tlmm {
+	gpio-line-names =
+		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
+		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
+		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
+		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
+		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
+		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
+		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
+		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
+		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
+		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
+		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
+		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
+		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
+		"[I2C3_SDA]", /* HSEC pin 38 */
+		"[I2C3_SCL]", /* HSEC pin 36 */
+		"[SPI0_MOSI]", /* LSEC pin 14 */
+		"[SPI0_MISO]", /* LSEC pin 10 */
+		"[SPI0_CS_N]", /* LSEC pin 12 */
+		"[SPI0_CLK]", /* LSEC pin 8 */
+		"HDMI_HPD_N", /* GPIO 20 */
+		"USR_LED_1_CTRL",
+		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
+		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
+		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
+		"[CSI0_MCLK]", /* HSEC pin 15 */
+		"[CSI1_MCLK]", /* HSEC pin 17 */
+		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
+		"[I2C2_SDA]", /* HSEC pin 34 */
+		"[I2C2_SCL]", /* HSEC pin 32 */
+		"DSI2HDMI_INT_N",
+		"DSI_SW_SEL_APQ",
+		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
+		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
+		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
+		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
+		"FORCED_USB_BOOT",
+		"SD_CARD_DET_N",
+		"[WCSS_BT_SSBI]",
+		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
+		"[WCSS_WLAN_DATA_1]",
+		"[WCSS_WLAN_DATA_0]",
+		"[WCSS_WLAN_SET]",
+		"[WCSS_WLAN_CLK]",
+		"[WCSS_FM_SSBI]",
+		"[WCSS_FM_SDI]",
+		"[WCSS_BT_DAT_CTL]",
+		"[WCSS_BT_DAT_STB]",
+		"NC",
+		"NC", /* GPIO 50 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 60 */
+		"NC",
+		"NC",
+		"[CDC_PDM0_CLK]",
+		"[CDC_PDM0_SYNC]",
+		"[CDC_PDM0_TX0]",
+		"[CDC_PDM0_RX0]",
+		"[CDC_PDM0_RX1]",
+		"[CDC_PDM0_RX2]",
+		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
+		"NC", /* GPIO 70 */
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 74 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_0", /* GPIO 80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"BOOT_CONFIG_5",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 90 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC", /* GPIO 100 */
+		"NC",
+		"NC",
+		"NC",
+		"SSBI_GPS",
+		"NC",
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
+		"NC",
+		"NC",
+		"[LS_EXP_MI2S_SCK]",
+		"[LS_EXP_MI2S_DATA0]",
+		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
+		"NC",
+		"[DSI2HDMI_MI2S_WS]",
+		"[DSI2HDMI_MI2S_SCK]",
+		"[DSI2HDMI_MI2S_DATA0]",
+		"USR_LED_2_CTRL", /* GPIO 120 */
+		"SB_HS_ID";
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tlmm_leds: tlmm-leds-state {
+		pins = "gpio21", "gpio120";
+		function = "gpio";
+
+		output-low;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	adv7533_int_active: adv533-int-active-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_int_suspend: adv7533-int-suspend-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	adv7533_switch_active: adv7533-switch-active-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	adv7533_switch_suspend: adv7533-switch-suspend-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_key_volp_n_default: msm-key-volp-n-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"USR_LED_3_CTRL",
+		"USR_LED_4_CTRL",
+		"USB_HUB_RESET_N_PM",
+		"USB_SW_SEL_PM";
+
+	usb_hub_reset_pm: usb-hub-reset-pm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		input-disable;
+		output-high;
+	};
+
+	usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+
+	usb_sw_sel_pm: usb-sw-sel-pm-state {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
+	};
+
+	usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
+	};
+
+	pm8916_gpios_leds: pm8916-gpios-leds-state {
+		pins = "gpio1", "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
+	};
+};
+
+&pm8916_mpps {
+	gpio-line-names =
+		"VDD_PX_BIAS",
+		"WLAN_LED_CTRL",
+		"BT_LED_CTRL",
+		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f>;
+
+	ls_exp_gpio_f: pm8916-mpp4-state {
+		pins = "mpp4";
+		function = "digital";
+
+		output-low;
+		power-source = <PM8916_MPP_L5>;	/* 1.8V */
+	};
+
+	pm8916_mpps_leds: pm8916-mpps-state {
+		pins = "mpp2", "mpp3";
+		function = "digital";
+
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
new file mode 100644
index 000000000..027d1da7e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "msm8939.dtsi"
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/ {
+	model = "Square, Inc. T2 Devkit";
+	compatible = "square,apq8039-t2", "qcom,msm8939";
+
+	qcom,board-id = <0x53 0x54>;
+	qcom,msm-id = <QCOM_ID_APQ8039 0x30000>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &blsp_uart1;
+		serial1 = &blsp_uart2;
+	};
+
+	bl: backlight {
+		compatible = "gpio-backlight";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pinctrl-names = "default";
+		gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	vreg_lcd_avdd_reg: lcd-avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_avdd";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+		pinctrl-0 = <&pinctrl_lcd_avdd_reg>;
+		pinctrl-names = "default";
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+	};
+
+	vreg_lcd_avee_reg: lcd-avee-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_avee";
+		regulator-min-microvolt = <5600000>;
+		regulator-max-microvolt = <5600000>;
+		pinctrl-0 = <&pinctrl_lcd_avee_reg>;
+		pinctrl-names = "default";
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+	};
+
+	vreg_lcd_iovcc_reg: lcd-iovcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_iovcc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-0 = <&pinctrl_lcd_iovcc_reg>;
+		pinctrl-names = "default";
+		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300>;
+		enable-active-high;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+};
+
+&blsp_i2c2 {
+	status = "okay";
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	typec_pd: usb-pd@38 {
+		compatible = "ti,tps6598x";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <107 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec_irq>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+
+			port {
+				typec_ep: endpoint {
+					remote-endpoint = <&otg_ep>;
+				};
+			};
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+};
+
+&blsp_uart1 {
+	status = "okay";
+};
+
+&blsp_uart1_default {
+	pins = "gpio0", "gpio1";
+};
+
+&blsp_uart1_sleep {
+	pins = "gpio0", "gpio1";
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&pm8916_codec {
+	qcom,hphl-jack-type-normally-open;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	status = "okay";
+};
+
+&pm8916_gpios {
+	gpio-line-names =
+		"PM_GPIO1",     /* WIFI_GPIO1_PRE */
+		"PM_GPIO2",     /* WIFI_GPIO2_PRE */
+		"PM_GPIO3",
+		"PM_GPIO4";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sound {
+	model = "apq8039-square-sndcard";
+	audio-routing = "AMIC2", "MIC BIAS Internal2";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+
+	internal-codec-playback-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	internal-codec-capture-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+/*
+ * Line names are taken from the schematic of T2, Ver X03.
+ * July 14, 2018. Page 4 in particular.
+ */
+&tlmm {
+	gpio-line-names =
+		"APQ_UART1_TX",		/* GPIO_0 */
+		"APQ_UART1_RX",
+		"APQ_I2C1_SDA",
+		"APQ_I2C1_SCL",
+		"APQ_UART2_TX_1V8",
+		"APQ_UART2_RX_1V8",
+		"APQ_I2C2_SDA",
+		"APQ_I2C2_SCL",
+		"NC",
+		"APQ_LCD_IOVCC_EN",
+		"APQ_I2C3_SDA",		/* GPIO_10 */
+		"APQ_I2C3_SCL",
+		"TOUCH_RST_1V8_L",
+		"NC",
+		"APQ_I2C4_SDA",
+		"APQ_I2C4_SCL",
+		"APQ_ID5",
+		"USB_DISCONNECT",
+		"APQ_I2C5_SDA",
+		"APQ_I2C5_SCL",
+		"APQ_USBC_SPI_MOSI",	/* GPIO_20 */
+		"APQ_USBC_SPI_MISO",
+		"APQ_USBC_SPI_SS_L",
+		"APQ_USBC_SPI_CLK",
+		"APQ_LCD_TE0",
+		"APQ_LCD_RST_L",
+		"NC",
+		"NC",
+		"ACCELEROMETER_INT1",
+		"APQ_CAM_I2C0_SDA",
+		"APQ_CAM_I2C0_SCL",	/* GPIO_30 */
+		"ACCELEROMETER_INT2",
+		"NC",
+		"NC",
+		"NC",
+		"APQ_K21_RST_1V8_L",
+		"NC",
+		"APQ_EDL_1V8",
+		"TP145",
+		"BT_SSBI",
+		"NC",			/* GPIO_40 */
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"BT_CTRL",
+		"BT_DAT",
+		"PWR_GPIO_IN",
+		"PWR_GPIO_OUT",		/* GPIO_50 */
+		"CARD_DET_MLB_L",
+		"HALL_SENSOR",
+		"TP63",
+		"TP64",
+		"TP65",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",			/* GPIO_60 */
+		"NC",
+		"APQ_K21_GPIO0_1V8",
+		"CDC_PDM_CLK",
+		"CDC_PDM_SYNC",
+		"CDC_PDM_TX",
+		"CDC_PDM_RX0",
+		"CDC_PDM_RX1",
+		"CDC_PDM_RX2",
+		"APQ_K21_GPIO1_1V8",
+		"NC",			/* GPIO_70 */
+		"APQ_HUB_SEL_1V8",
+		"APQ_K21_GPIO2_1V8",
+		"APQ_K21_GPIO3_1V8",
+		"APQ_ID0",
+		"APQ_ID1",
+		"APQ_ID2",
+		"APQ_ID3",
+		"APQ_ID4",
+		"APQ_HUB_SUSP_IND",
+		"BOOT_CONFIG_0",	/* GPIO_80 */
+		"BOOT_CONFIG_1",
+		"BOOT_CONFIG_2",
+		"BOOT_CONFIG_3",
+		"NC",
+		"NC",
+		"APQ_LCD_AVDD_EN",
+		"APQ_LCD_AVEE_EN",
+		"TP70",
+		"NC",
+		"APQ_DEBUG0",		/* GPIO_90 */
+		"APQ_DEBUG1",
+		"APQ_DEBUG2",
+		"APQ_DEBUG3",
+		"TP165",
+		"NC",
+		"APQ_LNA_PWR_EN",
+		"NC",
+		"APQ_LCD_BL_EN",
+		"NC",
+		"APQ_LCD_ID0",		/* GPIO_100 */
+		"APQ_LCD_ID1",
+		"USBC_GPIO5_1V8",
+		"NC",
+		"NC",
+		"NC",
+		"APQ_HUB_RST_1V8_L",
+		"USBC_I2C_IRQ_1V8_L",
+		"SPE_PWR_EN",
+		"NC",
+		"APQ_USB_ID",		/* GPIO_110 */
+		"APQ_EXT_BUCK_VSEL",
+		"APQ_USB_ID_OUT",
+		"NC",
+		"PRNT_RST_L",
+		"APQ_CRQ_I2C_RDY_1V8",
+		"TYPEC_RST_1V8_H",
+		"CHG_BACKPWR_EN",
+		"CHG_PROCHOT_L",
+		"NC",
+		"USBC_GPIO7_1V8",	/* GPIO_120 */
+		"NC";
+
+	pinctrl_backlight: backlight-state {
+		pins = "gpio98";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_avdd_reg: lcd-avdd-reg-state {
+		pins = "gpio86";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_avee_reg: lcd-avee-reg-state {
+		pins = "gpio87";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state {
+		pins = "gpio9";
+		function = "gpio";
+	};
+
+	pinctrl_lcd_rst: lcd-rst-state {
+		pins = "gpio25";
+		function = "gpio";
+	};
+
+	pinctrl_otg_default: otg-default-state {
+		function = "gpio";
+		pins = "gpio17";
+		output-high;
+	};
+
+	pinctrl_otg_device: otg-device-state {
+		function = "gpio";
+		pins = "gpio17";
+		output-low;
+	};
+
+	pinctrl_otg_host: otg-host-state {
+		function = "gpio";
+		pins = "gpio17";
+		output-low;
+	};
+
+	typec_irq: typec-irq-state {
+		function = "gpio";
+		pins = "gpio107";
+		bias-pull-up;
+	};
+};
+
+&usb {
+	pinctrl-names = "default", "host", "device";
+	pinctrl-0 = <&pinctrl_otg_default>;
+	pinctrl-1 = <&pinctrl_otg_host>;
+	pinctrl-2 = <&pinctrl_otg_device>;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		otg_ep: endpoint {
+			remote-endpoint = <&typec_ep>;
+		};
+	};
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3680";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
new file mode 100644
index 000000000..314d2dc47
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* As the names may imply, there is quite a bunch of duplication there. */
+#include "msm8994-sony-xperia-kitakami-karin.dts"
+
+/ {
+	model = "Sony Xperia Z4 Tablet (Wi-Fi)";
+	compatible = "sony,karin_windy", "qcom,apq8094";
+	chassis-type = "tablet";
+
+	/*
+	 * This model uses the APQ variant of MSM8994 (APQ8094).
+	 * The v1/v2/v2.1 story (from kitakami.dtsi) also applies here.
+	 */
+	qcom,msm-id = <253 0x20000>, <253 0x20001>;
+};
+
+/delete-node/ &pm8994_l1;
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
new file mode 100644
index 000000000..3067a4091
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -0,0 +1,1137 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+/ {
+	model = "Qualcomm Technologies, Inc. DB820c";
+	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+		serial1 = &blsp2_uart3;
+		serial2 = &blsp1_uart2;
+		i2c0 = &blsp1_i2c3;
+		i2c1 = &blsp2_i2c1;
+		i2c2 = &blsp2_i2c1;
+		spi0 = &blsp1_spi1;
+		spi1 = &blsp2_spi6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	div1_mclk: divclk1 {
+		compatible = "gpio-gate-clock";
+		pinctrl-0 = <&audio_mclk>;
+		pinctrl-names = "default";
+		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+		#clock-cells = <0>;
+		enable-gpios = <&pm8994_gpios 15 0>;
+	};
+
+	divclk4: divclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk4";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk4_pin_a>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		button {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	/* On Low speed expansion: LS-I2C0 */
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	/* On Low speed expansion */
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+	firmware-name = "qcom/apq8096/adsp.mbn";
+};
+
+&blsp2_i2c1 {
+	/* On High speed expansion: HS-I2C2 */
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion: LS-I2C1 */
+	status = "okay";
+};
+
+&blsp2_spi6 {
+	/* On High speed expansion */
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&blsp2_uart3 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart3_4pins_default>;
+	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	status = "okay";
+	pll-supply = <&vreg_l12a_1p8>;
+	firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
+};
+
+&pm8994_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+		"TP93", /* GPIO_9 */
+		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+		"NC", /* GPIO_12 */
+		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+		"TP99", /* GPIO_16 */
+		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+		"GPIO-D", /* GPIO_24, LSEC pin 26 */
+		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+		"BLSP6_I2C_SDA", /* GPIO_27 */
+		"BLSP6_I2C_SCL", /* GPIO_28 */
+		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+		"GPIO30", /* GPIO_30, S HSEC pin 4 */
+		"HDMI_CEC", /* GPIO_31 */
+		"HDMI_DDC_CLOCK", /* GPIO_32 */
+		"HDMI_DDC_DATA", /* GPIO_33 */
+		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+		"PCIE0_RST_N", /* GPIO_35 */
+		"PCIE0_CLKREQ_N", /* GPIO_36 */
+		"PCIE0_WAKE", /* GPIO_37 */
+		"SD_CARD_DET_N", /* GPIO_38 */
+		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+		"W_DISABLE_N", /* GPIO_40 */
+		"[BLSP9_UART_TX]", /* GPIO_41 */
+		"[BLSP9_UART_RX]", /* GPIO_42 */
+		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+		"[BLSP3_UART_TX]", /* GPIO_45 */
+		"[BLSP3_UART_RX]", /* GPIO_46 */
+		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+		"[CODEC_INT1_N]", /* GPIO_53 */
+		"[CODEC_INT2_N]", /* GPIO_54 */
+		"[BLSP7_I2C_SDA]", /* GPIO_55 */
+		"[BLSP7_I2C_SCL]", /* GPIO_56 */
+		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+		"GPIO-E", /* GPIO_62, LSEC pin 27 */
+		"TP87", /* GPIO_63 */
+		"[CODEC_RST_N]", /* GPIO_64 */
+		"[PCM1_CLK]", /* GPIO_65 */
+		"[PCM1_SYNC]", /* GPIO_66 */
+		"[PCM1_DIN]", /* GPIO_67 */
+		"[PCM1_DOUT]", /* GPIO_68 */
+		"AUDIO_REF_CLK", /* GPIO_69 */
+		"SLIMBUS_CLK", /* GPIO_70 */
+		"SLIMBUS_DATA0", /* GPIO_71 */
+		"SLIMBUS_DATA1", /* GPIO_72 */
+		"NC", /* GPIO_73 */
+		"NC", /* GPIO_74 */
+		"NC", /* GPIO_75 */
+		"NC", /* GPIO_76 */
+		"TP94", /* GPIO_77 */
+		"NC", /* GPIO_78 */
+		"TP95", /* GPIO_79 */
+		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+		"TP88", /* GPIO_81 */
+		"TP89", /* GPIO_82 */
+		"TP90", /* GPIO_83 */
+		"TP91", /* GPIO_84 */
+		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+		"NC", /* GPIO_92 */
+		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+		"NC", /* GPIO_97 */
+		"CAM1_STANDBY_N", /* GPIO_98 */
+		"NC", /* GPIO_99 */
+		"NC", /* GPIO_100 */
+		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+		"BOOT_CONFIG1", /* GPIO_102 */
+		"USB_HUB_RESET", /* GPIO_103 */
+		"CAM1_RST_N", /* GPIO_104 */
+		"NC", /* GPIO_105 */
+		"NC", /* GPIO_106 */
+		"NC", /* GPIO_107 */
+		"NC", /* GPIO_108 */
+		"NC", /* GPIO_109 */
+		"NC", /* GPIO_110 */
+		"NC", /* GPIO_111 */
+		"NC", /* GPIO_112 */
+		"PMI8994_BUA", /* GPIO_113 */
+		"PCIE2_RST_N", /* GPIO_114 */
+		"PCIE2_CLKREQ_N", /* GPIO_115 */
+		"PCIE2_WAKE", /* GPIO_116 */
+		"SSC_IRQ_0", /* GPIO_117 */
+		"SSC_IRQ_1", /* GPIO_118 */
+		"SSC_IRQ_2", /* GPIO_119 */
+		"NC", /* GPIO_120 */
+		"GPIO121", /* GPIO_121, S HSEC pin 2 */
+		"NC", /* GPIO_122 */
+		"SSC_IRQ_6", /* GPIO_123 */
+		"SSC_IRQ_7", /* GPIO_124 */
+		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+		"BOOT_CONFIG5", /* GPIO_126 */
+		"NC", /* GPIO_127 */
+		"NC", /* GPIO_128 */
+		"BOOT_CONFIG7", /* GPIO_129 */
+		"PCIE1_RST_N", /* GPIO_130 */
+		"PCIE1_CLKREQ_N", /* GPIO_131 */
+		"PCIE1_WAKE", /* GPIO_132 */
+		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+		"NC", /* GPIO_134 */
+		"NC", /* GPIO_135 */
+		"BOOT_CONFIG8", /* GPIO_136 */
+		"NC", /* GPIO_137 */
+		"NC", /* GPIO_138 */
+		"GPS_SSBI2", /* GPIO_139 */
+		"GPS_SSBI1", /* GPIO_140 */
+		"NC", /* GPIO_141 */
+		"NC", /* GPIO_142 */
+		"NC", /* GPIO_143 */
+		"BOOT_CONFIG6", /* GPIO_144 */
+		"NC", /* GPIO_145 */
+		"NC", /* GPIO_146 */
+		"NC", /* GPIO_147 */
+		"NC", /* GPIO_148 */
+		"NC"; /* GPIO_149 */
+
+	sdc2_cd_on: sdc2-cd-on-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_cd_off: sdc2-cd-off-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	hdmi_hpd_active: hdmi-hpd-active-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <16>;
+	};
+
+	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
+		pins = "gpio34";
+		function = "hdmi_hot";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	hdmi_ddc_active: hdmi-ddc-active-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
+		pins = "gpio32", "gpio33";
+		function = "hdmi_ddc";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie2 {
+	status = "okay";
+	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+	vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",
+		"KEY_VOLP_N",
+		"NC",
+		"BL1_PWM",
+		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+		"BL1_EN",
+		"NC",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"DIVCLK1",
+		"DIVCLK2",
+		"DIVCLK3",
+		"DIVCLK4",
+		"BT_EN",
+		"PMIC_SLB",
+		"PMIC_BUA",
+		"USB_VBUS_DET";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
+
+	ls_exp_gpio_f: pm8994-gpio5-state {
+		pinconf {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	bt_en_gpios: bt-en-pios-state {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pinconf {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	audio_mclk: clk-div1-state {
+		pinconf {
+			pins = "gpio15";
+			function = "func1";
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	volume_up_gpio: pm8996-gpio2-state {
+		pinconf {
+			pins = "gpio2";
+			function = "normal";
+			input-enable;
+			drive-push-pull;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+
+	usb3_vbus_det_gpio: pm8996-gpio22-state {
+		pinconf {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"VDDPX_BIAS",
+		"WIFI_LED",
+		"NC",
+		"BT_LED",
+		"PM_MPP05",
+		"PM_MPP06",
+		"PM_MPP07",
+		"NC";
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	vdd_s11-supply = <&vph_pwr>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	s11 {
+		qcom,saw-leader;
+		regulator-name = "VDD_APCC";
+		regulator-always-on;
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",
+		"SPKR_AMP_EN1",
+		"SPKR_AMP_EN2",
+		"TP61",
+		"NC",
+		"USB2_VBUS_DET",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+
+	usb2_vbus_det_gpio: pmi8996-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
+		};
+	};
+};
+
+&pmi8994_lpg {
+	qcom,power-source = <1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmi8994_mpp2_userled4>;
+
+	qcom,dtest = <0 0>,
+		     <0 0>,
+		     <0 0>,
+		     <4 1>;
+
+	status = "okay";
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <1>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <0>;
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <2>;
+	};
+
+	led@4 {
+		reg = <4>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+	};
+};
+
+&pmi8994_mpps {
+	pmi8994_mpp2_userled4: mpp2-userled4-state {
+		pins = "mpp2";
+		function = "sink";
+
+		output-low;
+		qcom,dtest = <4>;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+
+	vdd_gfx: s2 {
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p025>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		/**
+		 * 1.8v required on LS expansion
+		 * for mezzanine boards
+		 */
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-name = "vph_pwr_bbyp";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_s1b_1p025: s1 {
+			regulator-name = "vreg_s1b_1p025";
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+	};
+};
+
+&sdhc2 {
+	/* External SD card */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "DB820c";
+	audio-routing = "RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI";
+		cpu {
+			sound-dai = <&q6afedai HDMI_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&mdss_hdmi 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&usb2 {
+	status = "okay";
+	extcon = <&usb2_id>;
+};
+
+&usb2_dwc3 {
+	extcon = <&usb2_id>;
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&usb3_id>;
+};
+
+&usb3_dwc3 {
+	extcon = <&usb3_id>;
+	dr_mode = "otg";
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
new file mode 100644
index 000000000..ac6471d1d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Inforce 6640 Single Board Computer";
+	compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096";
+
+	qcom,msm-id = <291 0x00030001>;
+	qcom,board-id = <0x00010018 0>;
+
+	aliases {
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	v1p05: v1p05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p05";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&v5p0>;
+	};
+
+	v12_poe: v12-poe-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v12_poe";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	v3p3: v3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3p3";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	v5p0: v5p0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v5p0";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&v12_poe>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+};
+
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+};
+
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio38";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_1p0: s7 {
+			regulator-name = "vreg_s7a_1p0";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <850000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l18a_2p85: l18 {
+			regulator-name = "vreg_l18a_2p85";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		vreg_l19a_2p8: l19 {
+			regulator-name = "vreg_l19a_2p8";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l26a_0p8: l27 {
+			regulator-name = "vreg_l26a_0p8";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-name = "vreg_lvs1a_1p8";
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-name = "vreg_lvs2a_1p8";
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+
+	bus-width = <4>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
new file mode 100644
index 000000000..e636a1cb9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 MP03.1-C2 board device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C2";
+	compatible = "qcom,ipq5018-rdp432-c2", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <192000000>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio9";
+			function = "sdc1_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio8";
+			function = "sdc1_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			function = "sdc1_data";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
new file mode 100644
index 000000000..9f13d2dcd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 SoC device tree source
+ *
+ * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-size = <0x80000>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5018", "qcom,scm";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_region: tz@4ac00000 {
+			reg = <0x0 0x4ac00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5018-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 47>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart1_pins: uart1-state {
+				pins = "gpio31", "gpio32", "gpio33", "gpio34";
+				function = "blsp1_uart1";
+				drive-strength = <8>;
+				bias-pull-down;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-ipq5018";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x7804000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x2000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x2000>;  /* GICV */
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00a000 0x1ffa>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xff8>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xff8>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0xb123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
new file mode 100644
index 000000000..4870cdb76
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP board common device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ipq5332.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-0 {
+			gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+};
+
+&blsp1_uart0 {
+	pinctrl-0 = <&serial_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board {
+	clock-frequency = <24000000>;
+};
+
+/* PINCTRL */
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio35";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio36";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
new file mode 100644
index 000000000..e89e2e948
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 AP-MI01.2 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.2";
+	compatible = "qcom,ipq5332-ap-mi01.2", "qcom,ipq5332";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
new file mode 100644
index 000000000..efd480a7a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP442 board device tree source
+ *
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.3";
+	compatible = "qcom,ipq5332-ap-mi01.3", "qcom,ipq5332";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
new file mode 100644
index 000000000..f96b0c8c9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP468 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.6";
+	compatible = "qcom,ipq5332-ap-mi01.6", "qcom,ipq5332";
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_data_clk_pins &spi_0_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* PINCTRL */
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	spi_0_data_clk_pins: spi-0-data-clk-state {
+		pins = "gpio14", "gpio15", "gpio16";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	spi_0_cs_pins: spi-0-cs-state {
+		pins = "gpio17";
+		function = "blsp0_spi";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
new file mode 100644
index 000000000..eb1fa33d6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 RDP474 board device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5332-rdp-common.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5332 MI01.9";
+	compatible = "qcom,ipq5332-ap-mi01.9", "qcom,ipq5332";
+};
+
+&blsp1_i2c1 {
+	clock-frequency  = <400000>;
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhc {
+	bus-width = <4>;
+	max-frequency = <192000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* PINCTRL */
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio29", "gpio30";
+		function = "blsp1_i2c0";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio13";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio12";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
new file mode 100644
index 000000000..e40c55adf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * IPQ5332 device tree source
+ *
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq5332", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@4a100000 {
+			reg = <0x0 0x4a100000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4a500000 {
+			reg = <0x0 0x4a500000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_mem: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem@4a800000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4a800000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x721>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq5332-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 53>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_0_pins: serial0-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp0_uart0";
+				drive-strength = <8>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq5332-gcc";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq5332", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		sdhc: mmc@7804000 {
+			compatible = "qcom,ipq5332-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+
+			interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1d000>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,	/* GICD */
+			      <0x0b002000 0x1000>,	/* GICC */
+			      <0x0b001000 0x1000>,	/* GICH */
+			      <0x0b004000 0x1000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,apss-wdt-ipq5332", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq5332-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo_board>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq5332-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
new file mode 100644
index 000000000..f5f4827c0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ6018 CP01 board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
+	compatible = "qcom,ipq6018-cp01", "qcom,ipq6018";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_i2c3 {
+	pinctrl-0 = <&i2c_1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tlmm {
+	i2c_1_pins: i2c-1-state {
+		pins = "gpio42", "gpio43";
+		function = "blsp2_i2c";
+		drive-strength = <8>;
+	};
+
+	spi_0_pins: spi-0-state {
+		pins = "gpio38", "gpio39", "gpio40", "gpio41";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
new file mode 100644
index 000000000..fc907afe5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ6018 SoC device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+#include <dt-bindings/reset/qcom,gcc-ipq6018.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq6018_s2>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq6018", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-864000000 {
+			opp-hz = /bits/ 64 <864000000>;
+			opp-microvolt = <725000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <787500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <862500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmuv8: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-ipq6018";
+				qcom,glink-channels = "rpm_requests";
+
+				regulators {
+					compatible = "qcom,rpm-mp5496-regulators";
+
+					ipq6018_s2: s2 {
+						regulator-min-microvolt = <725000>;
+						regulator-max-microvolt = <1062500>;
+						regulator-always-on;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rpm_msg_ram: memory@60000 {
+			reg = <0x0 0x00060000 0x0 0x6000>;
+			no-map;
+		};
+
+		bootloader@4a100000 {
+			reg = <0x0 0x4a100000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4a500000 {
+			reg = <0x0 0x4a500000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz: memory@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+
+		smem_region: memory@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		q6_region: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x5500000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x0 0xffffffff>;
+		dma-ranges;
+		compatible = "simple-bus";
+
+		qusb_phy_1: qusb@59000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x00059000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: ssphy@78000 {
+			compatible = "qcom,ipq6018-qmp-usb3-phy";
+			reg = <0x0 0x00078000 0x0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: phy@78200 {
+				reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
+				      <0x0 0x00078400 0x0 0x200>, /* Rx */
+				      <0x0 0x00078800 0x0 0x1f8>, /* PCS */
+				      <0x0 0x00078600 0x0 0x044>; /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: qusb@79000 {
+			compatible = "qcom,ipq6018-qusb2-phy";
+			reg = <0x0 0x00079000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		pcie_phy: phy@84000 {
+			compatible = "qcom,ipq6018-qmp-pcie-phy";
+			reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				<&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			pcie_phy0: phy@84200 {
+				reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */
+				      <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */
+				      <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */
+				      <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_pcie0_pipe_clk_src";
+				#clock-cells = <0>;
+			};
+		};
+
+		mdio: mdio@90000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
+			reg = <0x0 0x00090000 0x0 0x64>;
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+			status = "disabled";
+		};
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq6018-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a4000 0x0 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		prng: qrng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x000e3000 0x0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x00704000 0x0 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0 0x0073a000 0x0 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq6018-pinctrl";
+			reg = <0x0 0x01000000 0x0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 80>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_3_pins: serial3-state {
+				pins = "gpio44", "gpio45";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-pull-down;
+			};
+
+			qpic_pins: qpic-state {
+				pins = "gpio1", "gpio3", "gpio4",
+					"gpio5", "gpio6", "gpio7",
+					"gpio8", "gpio10", "gpio11",
+					"gpio12", "gpio13", "gpio14",
+					"gpio15", "gpio17";
+				function = "qpic_pad";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq6018";
+			reg = <0x0 0x01800000 0x0 0x80000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,ipq6018-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0x0 0x01905000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq6018", "syscon";
+			reg = <0x0 0x01937000 0x0 0x21000>;
+		};
+
+		usb2: usb@70f8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x070f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_USB1_MASTER_CLK>,
+				 <&gcc GCC_USB1_SLEEP_CLK>,
+				 <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <24000000>;
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: usb@7000000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x07000000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x07884000 0x0 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart3: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0 0x078b1000 0x0 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b5000 0x0 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b6000 0x0 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b6000 0x0 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x078b7000 0x0 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0 0x07984000 0x0 0x1a000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@79b0000 {
+			compatible = "qcom,ipq6018-nand";
+			reg = <0x0 0x079b0000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			pinctrl-0 = <&qpic_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq6018-dwc3", "qcom,dwc3";
+			reg = <0x0 0x08af8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+					       <133330000>,
+					       <24000000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x08a00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				clocks = <&xo>;
+				clock-names = "ref";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
+			      <0x0 0x0b002000 0x0 0x1000>,  /*GICC*/
+			      <0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
+			      <0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0 0 0xb00a000 0 0xffd>;
+
+			v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				msi-controller;
+				reg = <0x0 0x0 0x0 0xffd>;
+			};
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0x0b017000 0x0 0x40>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0 0x0b111000 0x0 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq6018-a53pll";
+			reg = <0x0 0x0b116000 0x0 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x10000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0b120000 0x0 0x1000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		q6v5_wcss: remoteproc@cd00000 {
+			compatible = "qcom,ipq6018-wcss-pil";
+			reg = <0x0 0x0cd00000 0x0 0x4040>,
+			      <0x0 0x004ab000 0x0 0x20>;
+			reg-names = "qdsp6",
+				    "rmb";
+			interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 0>,
+					      <&wcss_smp2p_in 1 0>,
+					      <&wcss_smp2p_in 2 0>,
+					      <&wcss_smp2p_in 3 0>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			resets = <&gcc GCC_WCSSAON_RESET>,
+				 <&gcc GCC_WCSS_BCR>,
+				 <&gcc GCC_WCSS_Q6_BCR>;
+
+			reset-names = "wcss_aon_reset",
+				      "wcss_reset",
+				      "wcss_q6_reset";
+
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "prng";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x1b000 0xe000>;
+
+			qcom,smem-states = <&wcss_smp2p_out 0>,
+					   <&wcss_smp2p_out 1>;
+			qcom,smem-state-names = "shutdown",
+						"stop";
+
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+				label = "rtr";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+
+				qrtr_requests {
+					qcom,glink-channels = "IPCRTR";
+				};
+			};
+		};
+
+		pcie0: pci@20000000 {
+			compatible = "qcom,pcie-ipq6018";
+			reg = <0x0 0x20000000 0x0 0xf1d>,
+			      <0x0 0x20000f20 0x0 0xa8>,
+			      <0x0 0x20001000 0x0 0x1000>,
+			      <0x0 0x80000 0x0 0x4000>,
+			      <0x0 0x20100000 0x0 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			phys = <&pcie_phy0>;
+			phy-names = "pciephy";
+
+			ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>,
+				 <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>;
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc PCIE0_RCHNG_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	wcss: wcss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 000000000..5cf07caf4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074.dtsi"
+#include "pmp8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+	compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		serial1 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+
+	vreg_dummy: regulator-dummy { };
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_qmp0 {
+	status = "okay";
+};
+
+&pcie_qmp1 {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	vqmmc-supply = <&l11>;
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+	vdda-phy-supply = <&vreg_dummy>;
+	vdda-pll-supply = <&vreg_dummy>;
+};
+
+&ssphy_1 {
+	status = "okay";
+	vdda-phy-supply = <&vreg_dummy>;
+	vdda-pll-supply = <&vreg_dummy>;
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
new file mode 100644
index 000000000..cc1992ca0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074-hk10.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C1";
+	compatible = "qcom,ipq8074-hk10-c1", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
new file mode 100644
index 000000000..d7f0efda6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+#include "ipq8074-hk10.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8074/AP-HK10-C2";
+	compatible = "qcom,ipq8074-hk10-c2", "qcom,ipq8074";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
new file mode 100644
index 000000000..1b8379ba8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0x20000000>;
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_qmp0 {
+	status = "okay";
+};
+
+&pcie_qmp1 {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 000000000..92fd924bb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Qualcomm Technologies, Inc. IPQ8074";
+	compatible = "qcom,ipq8074";
+	interrupt-parent = <&intc>;
+
+	clocks {
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+
+		xo: xo {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4aa00000 {
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		memory@4ac00000 {
+			reg = <0x0 0x4ac00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq8074", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		ssphy_1: phy@58000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00058000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_AUX_CLK>,
+				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB1_PHY_BCR>,
+				<&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb1_ssphy: phy@58200 {
+				reg = <0x00058200 0x130>,     /* Tx */
+				      <0x00058400 0x200>,     /* Rx */
+				      <0x00058800 0x1f8>,     /* PCS */
+				      <0x00058600 0x044>;     /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3phy_1_cc_pipe_clk";
+			};
+		};
+
+		qusb_phy_1: phy@59000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00059000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy@78000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00078000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				<&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: phy@78200 {
+				reg = <0x00078200 0x130>,     /* Tx */
+				      <0x00078400 0x200>,     /* Rx */
+				      <0x00078800 0x1f8>,     /* PCS */
+				      <0x00078600 0x044>;     /* PCS misc */
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3phy_0_cc_pipe_clk";
+			};
+		};
+
+		qusb_phy_0: phy@79000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00079000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		pcie_qmp0: phy@84000 {
+			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
+			reg = <0x00084000 0x1bc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				<&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			resets = <&gcc GCC_PCIE0_PHY_BCR>,
+				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+
+			pcie_phy0: phy@84200 {
+				reg = <0x84200 0x16c>,
+				      <0x84400 0x200>,
+				      <0x84800 0x1f0>,
+				      <0x84c00 0xf4>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie20_phy0_pipe_clk";
+			};
+		};
+
+		pcie_qmp1: phy@8e000 {
+			compatible = "qcom,ipq8074-qmp-pcie-phy";
+			reg = <0x0008e000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				<&gcc GCC_PCIE1_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			resets = <&gcc GCC_PCIE1_PHY_BCR>,
+				<&gcc GCC_PCIE1PHY_PHY_BCR>;
+			reset-names = "phy",
+				      "common";
+			status = "disabled";
+
+			pcie_phy1: phy@8e200 {
+				reg = <0x8e200 0x130>,
+				      <0x8e400 0x200>,
+				      <0x8e800 0x1f8>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie20_phy1_pipe_clk";
+			};
+		};
+
+		mdio: mdio@90000 {
+			compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		prng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq8074-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+			status = "disabled";
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq8074-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 70>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			serial_4_pins: serial4-state {
+				pins = "gpio23", "gpio24";
+				function = "blsp4_uart1";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			i2c_0_pins: i2c-0-state {
+				pins = "gpio42", "gpio43";
+				function = "blsp1_i2c";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			spi_0_pins: spi-0-state {
+				pins = "gpio38", "gpio39", "gpio40", "gpio41";
+				function = "blsp0_spi";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hsuart_pins: hsuart-state {
+				pins = "gpio46", "gpio47", "gpio48", "gpio49";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			qpic_pins: qpic-state {
+				pins = "gpio1", "gpio3", "gpio4",
+				       "gpio5", "gpio6", "gpio7",
+				       "gpio8", "gpio10", "gpio11",
+				       "gpio12", "gpio13", "gpio14",
+				       "gpio15", "gpio16", "gpio17";
+				function = "qpic";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: gcc@1800000 {
+			compatible = "qcom,gcc-ipq8074";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo>, <&sleep_clk>;
+			clock-names = "xo", "sleep_clk";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq8074", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x000700>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			max-frequency = <384000000>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>,
+				<&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&hsuart_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-0 = <&serial_4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&spi_0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <100000>;
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b9000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x78b9000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x078ba000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <100000>;
+			dmas = <&blsp_dma 22>, <&blsp_dma 23>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1a000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		qpic_nand: nand-controller@79b0000 {
+			compatible = "qcom,ipq8074-nand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			pinctrl-0 = <&qpic_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		usb_0: usb@8af8800 {
+			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			power-domains = <&gcc USB0_GDSC>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		usb_1: usb@8cf8800 {
+			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
+			reg = <0x08cf8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+				<&gcc GCC_USB1_MASTER_CLK>,
+				<&gcc GCC_USB1_SLEEP_CLK>,
+				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				"core",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+					  <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			power-domains = <&gcc USB1_GDSC>;
+
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: usb@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8c00000 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			ranges = <0 0xb00a000 0xffd>;
+
+			v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				msi-controller;
+				reg = <0x0 0xffd>;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,kpss-wdt";
+			reg = <0xb017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq8074-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			clocks = <&a53pll>, <&xo>;
+			clock-names = "pll", "xo";
+
+			#clock-cells = <1>;
+			#mbox-cells = <1>;
+		};
+
+		a53pll: clock@b116000 {
+			compatible = "qcom,ipq8074-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+
+			frame@b120000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		pcie1: pci@10000000 {
+			compatible = "qcom,pcie-ipq8074";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x00088000 0x2000>,
+			      <0x10100000 0x1000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			phys = <&pcie_phy1>;
+			phy-names = "pciephy";
+
+			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */
+
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 142
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 143
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 144
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 145
+					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
+				 <&gcc GCC_PCIE1_AXI_M_CLK>,
+				 <&gcc GCC_PCIE1_AXI_S_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>,
+				 <&gcc GCC_PCIE1_AUX_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "aux";
+			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
+				 <&gcc GCC_PCIE1_SLEEP_ARES>,
+				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE1_AHB_ARES>,
+				 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky";
+			status = "disabled";
+		};
+
+		pcie0: pci@20000000 {
+			compatible = "qcom,pcie-ipq8074-gen3";
+			reg = <0x20000000 0xf1d>,
+			      <0x20000f20 0xa8>,
+			      <0x20001000 0x1000>,
+			      <0x00080000 0x4000>,
+			      <0x20100000 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			max-link-speed = <3>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			phys = <&pcie_phy0>;
+			phy-names = "pciephy";
+
+			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
+				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */
+
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 75
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79
+					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83
+					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
+				 <&gcc GCC_PCIE0_AXI_M_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>;
+			clock-names = "iface",
+				      "axi_m",
+				      "axi_s",
+				      "axi_bridge",
+				      "rchng";
+
+			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
+				 <&gcc GCC_PCIE0_SLEEP_ARES>,
+				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE0_AHB_ARES>,
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
+			reset-names = "pipe",
+				      "sleep",
+				      "sticky",
+				      "axi_m",
+				      "axi_s",
+				      "ahb",
+				      "axi_m_sticky",
+				      "axi_s_sticky";
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				nss-top-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				nss-0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		nss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				nss-1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				wcss-phya0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phya1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				wcss-phya1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu2-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3_thermal: cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu3-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster_thermal: cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cluster-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phyb0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				wcss-phyb0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wcss-phyb1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				wcss-phyb1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
new file mode 100644
index 000000000..2b093e026
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP418 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2";
+	compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
new file mode 100644
index 000000000..877026ccc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP433 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
+	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc_default_state>;
+	pinctrl-names = "default";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	max-frequency = <384000000>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	sdc_default_state: sdc-default-state {
+		clk-pins {
+			pins = "gpio5";
+			function = "sdc_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "gpio4";
+			function = "sdc_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2",
+			       "gpio3", "gpio6", "gpio7",
+			       "gpio8", "gpio9";
+			function = "sdc_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "gpio10";
+			function = "sdc_rclk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&regulator_fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&regulator_fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&regulator_fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
new file mode 100644
index 000000000..c8fa54e1a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP449 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6";
+	compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
new file mode 100644
index 000000000..f01de6628
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP453 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8";
+	compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
new file mode 100644
index 000000000..6efae3426
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 RDP454 board device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq9574.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9";
+	compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_spi0 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-mp5496-regulators";
+
+		ipq9574_s1: s1 {
+		/*
+		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
+		 * During regulator registration, kernel not knowing the initial voltage,
+		 * considers it as zero and brings up the regulators with minimum supported voltage.
+		 * Update the regulator-min-microvolt with SVS voltage of 725mV so that
+		 * the regulators are brought up with 725mV which is sufficient for all the
+		 * corner parts to operate at 800MHz
+		 */
+			regulator-min-microvolt = <725000>;
+			regulator-max-microvolt = <1075000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	spi_0_pins: spi-0-state {
+		pins = "gpio11", "gpio12", "gpio13", "gpio14";
+		function = "blsp0_spi";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
new file mode 100644
index 000000000..8a72ad4af
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -0,0 +1,982 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * IPQ9574 SoC device tree source
+ *
+ * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-supply = <&ipq9574_s1>;
+			#cooling-cells = <2>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq9574", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-936000000 {
+			opp-hz = /bits/ 64 <936000000>;
+			opp-microvolt = <725000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <787500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <862500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-ipq9574";
+				qcom,glink-channels = "rpm_requests";
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bootloader@4a100000 {
+			reg = <0x0 0x4a100000 0x0 0x400000>;
+			no-map;
+		};
+
+		sbl@4a500000 {
+			reg = <0x0 0x4a500000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_region: tz@4a600000 {
+			reg = <0x0 0x4a600000 0x0 0x400000>;
+			no-map;
+		};
+
+		smem@4aa00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4aa00000 0x0 0x100000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x6000>;
+		};
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x5a1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0073a000 0x6000>;
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 2>, <&cryptobam 3>;
+			dma-names = "rx", "tx";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-ipq9574", "syscon";
+			reg = <0x01937000 0x21000>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b2000 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart4: serial@78b3000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b3000 0x200>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_uart5: serial@78b4000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b4000 0x200>;
+			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			spi-max-frequency = <50000000>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+			assigned-clock-rates = <50000000>;
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi4: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+
+			status = "disabled";
+		};
+
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			usb_0_dwc3: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x2000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x2000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		watchdog: watchdog@b017000 {
+			compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <30>;
+		};
+
+		apcs_glb: mailbox@b111000 {
+			compatible = "qcom,ipq9574-apcs-apps-global",
+				     "qcom,ipq6018-apcs-apps-global";
+			reg = <0x0b111000 0x1000>;
+			#clock-cells = <1>;
+			clocks = <&a73pll>, <&xo_board_clk>;
+			clock-names = "pll", "xo";
+			#mbox-cells = <1>;
+		};
+
+		a73pll: clock@b116000 {
+			compatible = "qcom,ipq9574-a73pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board_clk>;
+			clock-names = "xo";
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				nss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				ubi_0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				ubi_1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				ubi_2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				ubi_3-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu0_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu0_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu1_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu1_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu2_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu2_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu3_crit: cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu3_alert: cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		wcss-phyb-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				wcss_phyb-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top_glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
new file mode 100644
index 000000000..84723c9b7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * NOTE: The original firmware from Acer can only boot 32-bit kernels.
+ * To boot this device tree using arm64 it is necessary to flash 64-bit
+ * TZ/HYP firmware (e.g. taken from the DragonBoard 410c).
+ * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724)
+ * for suggested installation instructions.
+ */
+
+/ {
+	model = "Acer Iconia Talk S A1-724";
+	compatible = "acer,a1-724", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+
+		mount-matrix = "0", "-1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Actually ft5446 */
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l16>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
new file mode 100644
index 000000000..47da73866
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Alcatel OneTouch Idol 3 (4.7)";
+	compatible = "alcatel,idol347", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default>;
+
+		led-0 {
+			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "torch";
+			function = LED_FUNCTION_TORCH;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	touchscreen@26 {
+		compatible = "mstar,msg2638";
+		reg = <0x26>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_reset_default>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+		touchscreen-size-x = <2048>;
+		touchscreen-size-y = <2048>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+		mount-matrix = "0", "1", "0",
+			       "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	accelerometer@f {
+		compatible = "kionix,kxtj21009";
+		reg = <0x0f>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+		mount-matrix = "-1", "0", "0",
+			       "0", "1", "0",
+			       "0", "0", "-1";
+	};
+
+	proximity@48 {
+		compatible = "sensortek,stk3310";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&proximity_int_default>;
+	};
+
+	gyroscope@68 {
+		compatible = "bosch,bmg160";
+		reg = <0x68>;
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <97 IRQ_TYPE_EDGE_RISING>,
+			     <98 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyro_int_default>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	led-controller@68 {
+		compatible = "si-en,sn3190";
+		reg = <0x68>;
+		shutdown-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_enable_default &led_shutdown_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gyro_int_default: gyro-int-default-state {
+		pins = "gpio97", "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/*
+	 * The OEM wired an additional GPIO to be asserted so that
+	 * the si-en,sn3190 LED IC works. Since this GPIO is not
+	 * part of the IC datasheet nor supported by the driver,
+	 * force it asserted here.
+	 */
+	led_enable_default: led-enable-default-state {
+		pins = "gpio102";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	led_shutdown_default: led-shutdown-default-state {
+		pins = "gpio89";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio8";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	proximity_int_default: proximity-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_reset_default: ts-int-reset-default-state {
+		pins = "gpio13", "gpio100";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio69";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
new file mode 100644
index 000000000..92f695481
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Asus Zenfone 2 Laser";
+	compatible = "asus,z00l", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+
+		button-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reg_sd_vmmc: regulator-sdcard-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard-vmmc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_vmmc_en_default>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l8>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	imu@68 {
+		compatible = "invensense,mpu6515";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_default>;
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5306";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l11>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	vmmc-supply = <&reg_sd_vmmc>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio117";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio36";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio112";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sd_vmmc_en_default: sd-vmmc-en-default-state {
+		pins = "gpio87";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touch-pins {
+			pins = "gpio13";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
new file mode 100644
index 000000000..4aeeee24c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "GPLUS FL8005A";
+	compatible = "gplus,fl8005a", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	flash-led-controller {
+		/* Actually qcom,leds-gpio-flash */
+		compatible = "sgmicro,sgm3140";
+		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_flash_default>;
+		pinctrl-names = "default";
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		led-red {
+			function = LED_FUNCTION_CHARGING;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+		};
+
+		led-green {
+			function = LED_FUNCTION_CHARGING;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Actually ft5402 */
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <500>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-led-default-state {
+		pins = "gpio117", "gpio118";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
new file mode 100644
index 000000000..484e488a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Stephan Gerhold
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
+
+/*
+ * Note: The original firmware from Huawei can only boot 32-bit kernels.
+ * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP
+ * firmware (e.g. taken from the DragonBoard 410c).
+ * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
+ * for suggested installation instructions.
+ */
+
+/ {
+	model = "Huawei Ascend G7";
+	compatible = "huawei,g7", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds_default>;
+
+		led-0 {
+			gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+		};
+
+		led-1 {
+			gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+		};
+
+		led-2 {
+			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq_default>;
+
+		mount-matrix = "-1", "0", "0",
+				"0", "1", "0",
+				"0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <100000>;
+		amstaos,proximity-diodes = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_irq_default>;
+	};
+
+	regulator@3e {
+		compatible = "ti,tps65132";
+		reg = <0x3e>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&reg_lcd_en_default>;
+
+		reg_lcd_pos: outp {
+			regulator-name = "outp";
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
+			enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+			regulator-active-discharge = <1>;
+		};
+
+		reg_lcd_neg: outn {
+			regulator-name = "outn";
+			regulator-min-microvolt = <5400000>;
+			regulator-max-microvolt = <5400000>;
+			enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+			regulator-active-discharge = <1>;
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	rmi4@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l16>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq_default>;
+
+		syna,startup-delay-ms = <100>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&lpass {
+	status = "okay";
+};
+
+&lpass_codec {
+	status = "okay";
+};
+
+&pm8916_codec {
+	status = "okay";
+	qcom,micbias-lvl = <2800>;
+	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+	qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_l8 {
+	regulator-min-microvolt = <2950000>;
+	regulator-max-microvolt = <2950000>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	/*
+	 * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>.
+	 * However, gpio38 does not change its state when inserting/removing the
+	 * SD card, it's just low all the time. The Huawei kernel seems to use
+	 * polling for SD card detection instead.
+	 *
+	 * However, looking closer at the GPIO debug output it turns out that
+	 * gpio56 switches its state when inserting/removing the SD card.
+	 * It behaves just like gpio38 normally does. Usually GPIO56 is used as
+	 * "UIM2_PRESENT", i.e. to check if a second SIM card is inserted.
+	 * Maybe Huawei decided to replace the second SIM card slot with the
+	 * SD card slot and forgot to re-route to gpio38.
+	 */
+	cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	status = "okay";
+
+	model = "msm8916";
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS External2",
+		"AMIC3", "MIC BIAS External1";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cdc_pdm_default>;
+	pinctrl-1 = <&cdc_pdm_sleep>;
+
+	primary-dai-link {
+		link-name = "WCD";
+		cpu {
+			sound-dai = <&lpass MI2S_PRIMARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
+		};
+	};
+
+	tertiary-dai-link {
+		link-name = "WCD-Capture";
+		cpu {
+			sound-dai = <&lpass MI2S_TERTIARY>;
+		};
+		codec {
+			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
+		};
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_irq_default: accel-irq-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		pins = "gpio8", "gpio9", "gpio10";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		pins = "gpio2", "gpio20", "gpio21";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio36";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	prox_irq_default: prox-irq-default-state {
+		pins = "gpio113";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_lcd_en_default: reg-lcd-en-default-state {
+		pins = "gpio32", "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio56";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_irq_default: ts-irq-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio117";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
new file mode 100644
index 000000000..4efc534b1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Longcheer L8150";
+	compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 */
+		/delete-node/ wcnss@89300000;
+
+		wcnss_mem: wcnss@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reg_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "ctp";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ctp_pwr_en_default>;
+	};
+
+	flash-led-controller {
+		compatible = "sgmicro,sgm3140";
+		flash-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer@10 {
+		compatible = "bosch,bmc156_accel";
+		reg = <0x10>;
+
+		/*
+		 * For some reason the interrupt line is usually not connected
+		 * to the BMC156. However, there are two pads next to the chip
+		 * that can be shorted to make it work if needed.
+		 *
+		 * interrupt-parent = <&tlmm>;
+		 * interrupts = <116 IRQ_TYPE_EDGE_RISING>;
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc156_magn";
+		reg = <0x12>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <113 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&magn_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+
+	light-sensor@23 {
+		compatible = "liteon,ltr559";
+		reg = <0x23>;
+		proximity-near-level = <75>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&light_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+
+	gyroscope@68 {
+		compatible = "bosch,bmg160";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>,
+			     <22 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyro_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	rmi4@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&reg_ctp>;
+		vio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_default>;
+
+		syna,startup-delay-ms = <10>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>; /* Allow sleeping */
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>; /* Touchscreen */
+		};
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	non-removable;
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio116";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ctp_pwr_en_default: ctp-pwr-en-default-state {
+		pins = "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gyro_int_default: gyro-int-default-state {
+		pins = "gpio22", "gpio23";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	light_int_default: light-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	magn_int_default: magn-int-default-state {
+		pins = "gpio113";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tp_int_default: tp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
new file mode 100644
index 000000000..d73294af1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "BQ Aquaris X5 (Longcheer L8910)";
+	compatible = "longcheer,l8910", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&camera_front_flash_default>;
+		pinctrl-names = "default";
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			flash-max-timeout-us = <250000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&button_backlight_default>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c3 {
+	status = "okay";
+
+	magnetometer@d {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0d>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	imu@68 {
+		compatible = "bosch,bmi160";
+		reg = <0x68>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	button_backlight_default: button-backlight-default-state {
+		pins = "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	camera_front_flash_default: camera-front-flash-default-state {
+		pins = "gpio49", "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	mag_reset_default: mag-reset-default-state {
+		pins = "gpio111";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
new file mode 100644
index 000000000..ac527a3a0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp_uart2;
+		usid0 = &pm8916_0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
new file mode 100644
index 000000000..b1a7eafbe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections)
+ * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC.
+ * Many regulators have a fixed purpose in the original reference design and
+ * were rarely re-used for different purposes. Devices that deviate from the
+ * typical reference design should not make use of this include and instead add
+ * the necessary properties in the board-specific device tree.
+ */
+
+#include "msm8916.dtsi"
+#include "pm8916.dtsi"
+
+&camss {
+	vdda-supply = <&pm8916_l2>;
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi0_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+	pll-supply = <&pm8916_l7>;
+};
+
+&pm8916_codec {
+	vdd-cdc-io-supply = <&pm8916_l5>;
+	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	vdd-micbias-supply = <&pm8916_l13>;
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8916_l8>;
+	vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8916_l11>;
+	vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+	v1p8-supply = <&pm8916_l7>;
+	v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+	vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+	vddxo-supply = <&pm8916_l7>;
+	vddrfa-supply = <&pm8916_s3>;
+	vddpa-supply = <&pm8916_l9>;
+	vdddig-supply = <&pm8916_l5>;
+};
+
+&rpm_requests {
+	pm8916_rpm_regulators: regulators {
+		compatible = "qcom,rpm-pm8916-regulators";
+		vdd_l1_l2_l3-supply = <&pm8916_s3>;
+		vdd_l4_l5_l6-supply = <&pm8916_s4>;
+		vdd_l7-supply = <&pm8916_s4>;
+
+		/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
+
+		pm8916_s3: s3 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on; /* Needed for L2 */
+		};
+
+		pm8916_s4: s4 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-always-on; /* Needed for L5/L7 */
+		};
+
+		/*
+		 * Some of the regulators are unused or managed by another
+		 * processor (e.g. the modem). We should still define nodes for
+		 * them to ensure the vote from the application processor can be
+		 * dropped in case the regulators are already on during boot.
+		 *
+		 * The labels for these nodes are omitted on purpose because
+		 * boards should configure a proper voltage before using them.
+		 */
+		l1 {};
+
+		pm8916_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on; /* Needed for LPDDR RAM */
+		};
+
+		/* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
+
+		l4 {};
+
+		pm8916_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for most digital I/O */
+		};
+
+		pm8916_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8916_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for CPU PLL */
+		};
+
+		pm8916_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8916_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		l10 {};
+
+		pm8916_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8916_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8916_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		l14 {};
+		l15 {};
+		l16 {};
+		l17 {};
+		l18 {};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
new file mode 100644
index 000000000..019bf7317
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_pwm_default>;
+		status = "disabled";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	/*
+	 * NOTE: A5 connects GPIO 76 to a reglator powering the motor
+	 * driver IC but A3 connects the same signal to an ENABLE pin of
+	 * the driver.
+	 */
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&motor_en_default>;
+	};
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default>;
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@25 {
+			compatible = "siliconmitus,sm5502-muic";
+
+			reg = <0x25>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey: touchkey@20 {
+			/* Note: Actually an ABOV MCU that implements same interface */
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+			/* vcc/vdd-supply are board-specific */
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&tkey_default>;
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@27 {
+			compatible = "samsung,s3fwrn5-i2c";
+			reg = <0x27>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&nfc_default &nfc_clk_req>;
+		};
+	};
+
+	vibrator: vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+		status = "disabled";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	accelerometer: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
+	};
+
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	battery@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_alert_default>;
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_default>;
+	pinctrl-1 = <&mdss_sleep>;
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss_default: mdss-default-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-disable;
+	};
+	mdss_sleep: mdss-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default-state {
+		pins = "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&pm8916_gpios {
+	nfc_clk_req: nfc-clk-req-state {
+		pins = "gpio2";
+		function = "func1";
+
+		input-enable;
+		bias-disable;
+		power-source = <PM8916_GPIO_L2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
new file mode 100644
index 000000000..e5a569698
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-a2015-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy A3U (EUR)";
+	compatible = "samsung,a3u-eur", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_panel_vdd3: regulator-panel-vdd3 {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_vdd3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_vdd3_default>;
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+
+	reg_key_led: regulator-key-led {
+		compatible = "regulator-fixed";
+		regulator-name = "key_led";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_led_en_default>;
+	};
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
+};
+
+&accelerometer {
+	mount-matrix = "0", "1", "0",
+		       "1", "0", "0",
+		       "0", "0", "1";
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt541";
+
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vcca-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
+&clk_pwm {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	panel@0 {
+		reg = <0>;
+
+		compatible = "samsung,s6e88a0-ams452ef01";
+
+		vdd3-supply = <&reg_panel_vdd3>;
+		vci-supply = <&pm8916_l17>;
+		reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&panel_in>;
+};
+
+&vibrator {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	panel_vdd3_default: panel-vdd3-default-state {
+		pins = "gpio9";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio86";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default-state {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
new file mode 100644
index 000000000..388482a1e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-a2015-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy A5U (EUR)";
+	compatible = "samsung,a5u-eur", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+};
+
+&accelerometer {
+	mount-matrix = "-1", "0", "0",
+			"0", "1", "0",
+			"0", "0", "1";
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms345l";
+
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		avdd-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
+&clk_pwm {
+	status = "okay";
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_touch_key>;
+};
+
+&vibrator {
+	status = "okay";
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
new file mode 100644
index 000000000..6f65fd4b3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-samsung-a2015-common.dtsi"
+
+/ {
+	haptic {
+		compatible = "regulator-haptic";
+		haptic-supply = <&reg_motor_vdd>;
+		min-microvolt = <3300000>;
+		max-microvolt = <3300000>;
+	};
+
+	i2c-muic {
+		/* SM5504 MUIC instead of SM5502 */
+		/delete-node/ extcon@25;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+};
+
+&blsp_i2c2 {
+	/* lis2hh12 accelerometer instead of BMC150 */
+	/delete-node/ accelerometer@10;
+	/delete-node/ magnetometer@12;
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+
+		vdd-supply = <&pm8916_l5>;
+		vddio-supply = <&pm8916_l5>;
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "1", "0", "0",
+			       "0", "-1", "0",
+			       "0", "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&reg_motor_vdd {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_touch_key>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
new file mode 100644
index 000000000..fad253525
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-e2015-common.dtsi"
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some
+ * variants.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on 32-bit devices at the
+ * moment, even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-e5.dts
+ */
+
+/ {
+	model = "Samsung Galaxy E5";
+	compatible = "samsung,e5", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms345l";
+		reg = <0x48>;
+
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		avdd-supply = <&reg_vdd_tsp_a>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
new file mode 100644
index 000000000..b412b61ca
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-e2015-common.dtsi"
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some
+ * variants.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on 32-bit devices at the
+ * moment, even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-e7.dts
+ */
+
+/ {
+	model = "Samsung Galaxy E7";
+	compatible = "samsung,e7", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&pm8916_l17 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
new file mode 100644
index 000000000..3f145dde4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-e2015-common.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels on some
+ * variants.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on 32-bit devices at the
+ * moment, even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ * arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dts
+ */
+
+/ {
+	model = "Samsung Galaxy Grand Max";
+	compatible = "samsung,grandmax", "qcom,msm8916";
+	chassis-type = "handset";
+
+	/delete-node/ gpio-hall-sensor;
+	/delete-node/ i2c-nfc;
+	/delete-node/ i2c-tkey;
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		led-keyled {
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+
+			gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio_leds_default>;
+		};
+	};
+};
+
+&reg_motor_vdd {
+	gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
+};
+
+&reg_touch_key {
+	status = "disabled";
+};
+
+&tlmm {
+	gpio_leds_default: gpio-led-default-state {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&motor_en_default {
+	pins = "gpio72";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
new file mode 100644
index 000000000..54d648972
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		volume-up-button {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home-button {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		hall-sensor-switch {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77849-battery";
+		reg = <0x36>;
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,over-volt = <4400>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&fuelgauge_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	light-sensor@10 {
+		compatible = "capella,cm3323";
+		reg = <0x10>;
+	};
+
+	accelerometer@1d {
+		compatible = "st,lis2hh12";
+		reg = <0x1d>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l5>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
+
+		st,drdy-int-pin = <1>;
+		mount-matrix = "0", "1", "0",
+			      "-1", "0", "0",
+			       "0", "0", "1";
+
+		pinctrl-0 = <&accel_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+/* FIXME: Replace with MAX77849 MUIC when driver is available */
+&pm8916_usbin {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "peripheral";
+	extcon = <&pm8916_usbin>;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fuelgauge_int_default: fuelgauge-int-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
new file mode 100644
index 000000000..48111c6a2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-gt5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab A 9.7 (2015)";
+	compatible = "samsung,gt510", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	clk_pwm: pwm {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&motor_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_motor_vdd: regulator-motor-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_1p8v: regulator-tsp-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_1p8v";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_3p3v: regulator-tsp-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&clk_pwm 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_motor_vdd>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&reg_tsp_1p8v>;
+		vdda-supply = <&reg_tsp_3p3v>;
+
+		reset-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	motor_en_default: motor-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio13", "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
new file mode 100644
index 000000000..98ceaad7f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-gt5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab A 8.0 (2015)";
+	compatible = "samsung,gt58", "qcom,msm8916";
+	chassis-type = "tablet";
+
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&vibrator_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt532";
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+
+		vcca-supply = <&reg_vdd_tsp>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&tlmm {
+	reg_tsp_en_default: reg-tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_en_default: vibrator-en-default-state {
+		pins = "gpio76";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
new file mode 100644
index 000000000..cb0e4a7fa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio_hall_sensor: gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home Key";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	i2c_muic: i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@25 {
+			compatible = "siliconmitus,sm5703-muic";
+			reg = <0x25>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_int_default>;
+		};
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen: touchscreen@50 {
+		compatible = "imagis,ist3038c";
+		reg = <0x50>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
new file mode 100644
index 000000000..3e1ff5b4d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-j5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy J5 (2015)";
+	compatible = "samsung,j5", "qcom,msm8916";
+	chassis-type = "handset";
+};
+
+&blsp_i2c5 {
+	status = "disabled";
+};
+
+&touchscreen {
+	/* FIXME: Missing sm5703-mfd driver to power up vdd-supply */
+};
+
+&usb_hs_phy {
+	qcom,init-seq = /bits/ 8 <0x1 0x19 0x2 0x0b>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
new file mode 100644
index 000000000..b2fe10972
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5x.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-samsung-j5-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy J5 (2016)";
+	compatible = "samsung,j5x", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_vdd_tsp_a: regulator-vdd-tsp-a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp_a";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tsp_ldo_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&muic {
+	interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&touchscreen {
+	vdd-supply = <&reg_vdd_tsp_a>;
+};
+
+&tlmm {
+	tsp_ldo_en_default: tsp-ldo-en-default-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&muic_int_default {
+	pins = "gpio121";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
new file mode 100644
index 000000000..eaf877378
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Stephan Gerhold
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/*
+ * NOTE: The original firmware from Samsung can only boot ARM32 kernels.
+ * Unfortunately, the firmware is signed and cannot be replaced easily.
+ * There seems to be no way to boot ARM64 kernels on this device at the moment,
+ * even though the hardware would support it.
+ *
+ * However, it is possible to use this device tree by compiling an ARM32 kernel
+ * instead. For clarity and build testing this device tree is maintained next
+ * to the other MSM8916 device trees. However, it is actually used through
+ *   arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
+ */
+
+/ {
+	model = "Samsung Galaxy S4 Mini Value Edition";
+	compatible = "samsung,serranove", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_en_default>;
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+
+	reg_key_led: regulator-key-led {
+		compatible = "regulator-fixed";
+		regulator-name = "key_led";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_led_en_default>;
+	};
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&muic_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&muic_irq_default>;
+
+			usb_con: connector {
+				compatible = "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+			};
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&reg_touch_key>;
+			vdd-supply = <&reg_key_led>;
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&tkey_default>;
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_i2c_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@2b {
+			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+			reg = <0x2b>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&nfc_default>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <450000>;
+		constant-charge-current-max-microamp = <1000000>;
+		charge-term-current-microamp = <150000>;
+		precharge-upper-limit-microvolt = <3500000>;
+		constant-charge-voltage-max-microvolt = <4350000>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	imu@6b {
+		compatible = "st,lsm6ds3";
+		reg = <0x6b>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_irq_default>;
+	};
+
+	magnetometer@2e {
+		compatible = "yamaha,yas537";
+		reg = <0x2e>;
+
+		mount-matrix = "0",  "1",  "0",
+			       "1",  "0",  "0",
+			       "0",  "0", "-1";
+	};
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	fuel-gauge@35 {
+		compatible = "richtek,rt5033-battery";
+		reg = <0x35>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_alert_default>;
+
+		power-supplies = <&rt5033_charger>;
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "zinitix,bt541";
+		reg = <0x20>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <540>;
+		touchscreen-size-y = <960>;
+
+		vdd-supply = <&reg_vdd_tsp>;
+		vddo-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_irq_default>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	pmic@34 {
+		compatible = "richtek,rt5033";
+		reg = <0x34>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_default>;
+
+		regulators {
+			rt5033_reg_safe_ldo: SAFE_LDO {
+				regulator-min-microvolt = <4900000>;
+				regulator-max-microvolt = <4900000>;
+				regulator-always-on;
+			};
+			rt5033_reg_ldo: LDO {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+			rt5033_reg_buck: BUCK {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+
+		rt5033_charger: charger {
+			compatible = "richtek,rt5033-charger";
+			monitored-battery = <&battery>;
+			richtek,usb-connector = <&usb_con>;
+		};
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	non-removable;
+
+	/*
+	 * FIXME: Disable UHS-I modes since tuning fails with:
+	 *
+	 * sdhci_msm 7864900.sdhci: mmc1: No tuning point found
+	 * mmc1: tuning execution failed: -5
+	 * mmc1: error -5 whilst initialising SD card
+	 *
+	 * This is the quirk used on downstream, which suggests this is
+	 * a hardware limitation. However, probing a card using DDR50 works
+	 * (without tuning), so maybe only tuning is broken?
+	 */
+	no-1-8-v;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&muic>, <&muic>;
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	imu_irq_default: imu-irq-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_i2c_default: muic-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	muic_irq_default: muic-irq-default-state {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		nfc-pins {
+			pins = "gpio20", "gpio49";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pmic_int_default: pmic-int-default-state {
+		pins = "gpio62";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default-state {
+		pins = "gpio98";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio86";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default-state {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_irq_default: tsp-irq-default-state {
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
new file mode 100644
index 000000000..6fe1850ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "uf896 4G Modem Stick";
+	compatible = "thwc,uf896", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+};
+
+&led_r {
+	gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio35";
+	bias-pull-up;
+};
+
+&gpio_leds_default {
+	pins = "gpio81", "gpio82", "gpio83";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
new file mode 100644
index 000000000..16d4a9102
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "ufi-001c/ufi-001b 4G Modem Stick";
+	compatible = "thwc,ufi001c", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+};
+
+&led_r {
+	gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+};
+
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+};
+
+&button_default {
+	pins = "gpio37";
+	bias-pull-down;
+};
+
+&gpio_leds_default {
+	pins = "gpio20", "gpio21", "gpio22";
+};
+
+/* This selects the external SIM card slot by default */
+&tlmm {
+	sim_ctrl_default: sim-ctrl-default-state {
+		esim-sel-pins {
+			pins = "gpio0", "gpio3";
+			function = "gpio";
+			bias-disable;
+			output-low;
+		};
+
+		sim-en-pins {
+			pins = "gpio1";
+			function = "gpio";
+			bias-disable;
+			output-low;
+		};
+
+		sim-sel-pins {
+			pins = "gpio2";
+			function = "gpio";
+			bias-disable;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
new file mode 100644
index 000000000..004a129a2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x5500000>;
+			no-map;
+		};
+
+		gps_mem: gps@8bd00000 {
+			reg = <0x0 0x8bd00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		/* GPIO is board-specific */
+		button_restart: button-restart {
+			label = "Restart";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		/*
+		 * GPIOs are board-specific.
+		 * Functions and default-states defined here are fallbacks.
+		 * Feel free to override them if your board is different.
+		 */
+		led_r: led-r {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+		};
+
+		led_g: led-g {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+		};
+
+		led_b: led-b {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_WAN;
+		};
+	};
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+/* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
+&gcc {
+	clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
+};
+
+&mpss {
+	status = "okay";
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&pm8916_usbin>;
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	/* pins are board-specific */
+	button_default: button-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
new file mode 100644
index 000000000..43078b890
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Stephan Gerhold
+ */
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Xiaomi Redmi 2 (Wingtech WT88047)";
+	compatible = "wingtech,wt88047", "qcom,msm8916";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* eMMC */
+		mmc1 = &sdhc_2; /* SD card */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	flash-led-controller {
+		compatible = "ocs,ocp8110";
+		enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_flash_default>;
+
+		flash_led: led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default>;
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	imu@68 {
+		compatible = "invensense,mpu6880";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&imu_default>;
+
+		mount-matrix = "1",  "0", "0",
+			       "0", "-1", "0",
+			       "0",  "0", "1";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		/* Likely some other model but works just fine with this one */
+		compatible = "edt,edt-ft5506";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8916_l17>;
+		iovcc-supply = <&pm8916_l6>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+	};
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8916_l16>;
+		vio-supply = <&pm8916_l5>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <15000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-max-microamp = <15000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			led-max-microamp = <15000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l16: l16 {
+		/*
+		 * L16 is only used for AW2013 which is fine with 2.5-3.3V.
+		 * Use the recommended typical voltage of 2.8V as minimum.
+		 */
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&pm8916_vib {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+	non-removable;
+};
+
+&usb {
+	status = "okay";
+	extcon = <&usb_id>, <&usb_id>;
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+};
+
+&tlmm {
+	camera_flash_default: camera-flash-default-state {
+		pins = "gpio31", "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	imu_default: imu-default-state {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		touchscreen-pins {
+			pins = "gpio13";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+		reset-pins {
+			pins = "gpio12";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
new file mode 100644
index 000000000..5e6ba8c58
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "uz801 v3.0 4G Modem Stick";
+	compatible = "yiming,uz801-v3", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+};
+
+&led_r {
+	gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio23";
+	bias-pull-up;
+};
+
+&gpio_leds_default {
+	pins = "gpio6", "gpio7", "gpio8";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
new file mode 100644
index 000000000..961ceb83a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -0,0 +1,2682 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz-apps@86000000 {
+			reg = <0x0 0x86000000 0x0 0x300000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@86680000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		rfsa@867e0000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x2b00000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@89300000 {
+			reg = <0x0 0x89300000 0x0 0x600000>;
+			no-map;
+		};
+
+		venus_mem: venus@89900000 {
+			reg = <0x0 0x89900000 0x0 0x600000>;
+			no-map;
+		};
+
+		mba_mem: mba@8ea00000 {
+			no-map;
+			reg = <0 0x8ea00000 0 0x100000>;
+		};
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu0_acc>;
+			qcom,saw = <&cpu0_saw>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu1_acc>;
+			qcom,saw = <&cpu1_saw>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu2_acc>;
+			qcom,saw = <&cpu2_saw>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+			clocks = <&apcs>;
+			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,acc = <&cpu3_acc>;
+			qcom,saw = <&cpu3_saw>;
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+
+			CLUSTER_RET: cluster-retention {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000012>;
+				entry-latency-us = <500>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_PWRDN: cluster-gdhs {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000032>;
+				entry-latency-us = <2000>;
+				exit-latency-us = <2000>;
+				min-residency-us = <6000>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8916-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+			reg = <0x0005c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 7>;
+			};
+
+			tsens_s0_p1: s0-p1@d0 {
+				reg = <0xd0 0x2>;
+				bits = <7 5>;
+			};
+
+			tsens_s0_p2: s0-p2@d1 {
+				reg = <0xd1 0x2>;
+				bits = <4 5>;
+			};
+
+			tsens_s1_p1: s1-p1@d2 {
+				reg = <0xd2 0x1>;
+				bits = <1 5>;
+			};
+			tsens_s1_p2: s1-p2@d2 {
+				reg = <0xd2 0x2>;
+				bits = <6 5>;
+			};
+			tsens_s2_p1: s2-p1@d3 {
+				reg = <0xd3 0x1>;
+				bits = <3 5>;
+			};
+
+			tsens_s2_p2: s2-p2@d4 {
+				reg = <0xd4 0x1>;
+				bits = <0 5>;
+			};
+
+			// no tsens with hw_id 3
+
+			tsens_s4_p1: s4-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <5 5>;
+			};
+
+			tsens_s4_p2: s4-p2@d5 {
+				reg = <0xd5 0x1>;
+				bits = <2 5>;
+			};
+
+			tsens_s5_p1: s5-p1@d5 {
+				reg = <0xd5 0x2>;
+				bits = <7 5>;
+			};
+
+			tsens_s5_p2: s5-p2@d6 {
+				reg = <0xd6 0x2>;
+				bits = <4 5>;
+			};
+
+			tsens_base2: base2@d7 {
+				reg = <0xd7 0x1>;
+				bits = <1 7>;
+			};
+
+			tsens_mode: mode@ef {
+				reg = <0xef 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		sram@290000 {
+			compatible = "qcom,msm8916-rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8916-bimc";
+			reg = <0x00400000 0x62000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+
+			// no hw_id 3
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2";
+			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8916-pcnoc";
+			reg = <0x00500000 0x11000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			reg = <0x00580000 0x14000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		stm: stm@802000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x00802000 0x1000>,
+			      <0x09280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		/* System CTIs */
+		/* CTI 0 - TMC connections */
+		cti0: cti@810000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		/* CTI 1 - TPIU connections */
+		cti1: cti@811000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x00811000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		/* CTIs 2-11 - no information - not instantiated */
+
+		tpiu: tpiu@820000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x00820000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel@821000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x00821000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected to Resource and Power Manger CPU ETM
+				 * 1 - not-connected
+				 * 2 - connected to Modem CPU ETM
+				 * 3 - not-connected
+				 * 5 - not-connected
+				 * 6 - connected trought funnel to Wireless CPU ETM
+				 * 7 - connected to STM component
+				 */
+
+				port@4 {
+					reg = <4>;
+					funnel0_in4: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator: replicator@824000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x00824000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf: etf@825000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x00825000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr: etr@826000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x00826000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel@841000 {	/* APSS funnel only 4 inputs are used */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x00841000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			status = "disabled";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel1_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					funnel1_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					funnel1_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					funnel1_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		debug0: debug@850000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00850000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU0>;
+			status = "disabled";
+		};
+
+		debug1: debug@852000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00852000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU1>;
+			status = "disabled";
+		};
+
+		debug2: debug@854000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00854000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU2>;
+			status = "disabled";
+		};
+
+		debug3: debug@856000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x00856000 0x1000>;
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			cpu = <&CPU3>;
+			status = "disabled";
+		};
+
+		/* Core CTIs; CTIs 12-15 */
+		/* CTI - CPU-0 */
+		cti12: cti@858000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00858000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+			arm,cs-dev-assoc = <&etm0>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-1 */
+		cti13: cti@859000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x00859000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+			arm,cs-dev-assoc = <&etm1>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-2 */
+		cti14: cti@85a000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085a000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+			arm,cs-dev-assoc = <&etm2>;
+
+			status = "disabled";
+		};
+
+		/* CTI - CPU-3 */
+		cti15: cti@85b000 {
+			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+				     "arm,primecell";
+			reg = <0x0085b000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+			arm,cs-dev-assoc = <&etm3>;
+
+			status = "disabled";
+		};
+
+		etm0: etm@85c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU0>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@85d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU1>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel1_in1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@85e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU2>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel1_in2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@85f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0085f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU3>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel1_in3>;
+					};
+				};
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8916-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 122>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp_i2c1_default: blsp-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_default: blsp-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_default: blsp-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_default: blsp-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_default: blsp-i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_default: blsp-i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_spi1_default: blsp-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi1_sleep: blsp-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi2_default: blsp-spi2-default-state {
+				spi-pins {
+					pins = "gpio4", "gpio5", "gpio7";
+					function = "blsp_spi2";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio6";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi2_sleep: blsp-spi2-sleep-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi3_default: blsp-spi3-default-state {
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi3_sleep: blsp-spi3-sleep-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi4_default: blsp-spi4-default-state {
+				spi-pins {
+					pins = "gpio12", "gpio13", "gpio15";
+					function = "blsp_spi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio14";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi4_sleep: blsp-spi4-sleep-state {
+				pins = "gpio12", "gpio13", "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi5_default: blsp-spi5-default-state {
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi5_sleep: blsp-spi5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi6_default: blsp-spi6-default-state {
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi6_sleep: blsp-spi6-sleep-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart1_default: blsp-uart1-default-state {
+				/* TX, RX, CTS_N, RTS_N */
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart1_sleep: blsp-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart2_default: blsp-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart2_sleep: blsp-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			camera_front_default: camera-front-default-state {
+				pwdn-pins {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				rst-pins {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				mclk1-pins {
+					pins = "gpio27";
+					function = "cam_mclk1";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera_rear_default: camera-rear-default-state {
+				pwdn-pins {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				rst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+				mclk0-pins {
+					pins = "gpio26";
+					function = "cam_mclk0";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cdc_dmic_default: cdc-dmic-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <8>;
+				};
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <8>;
+				};
+			};
+
+			cdc_dmic_sleep: cdc-dmic-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cdc_pdm_default: cdc-pdm-default-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cdc_pdm_sleep: cdc-pdm-sleep-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pri_mi2s_default: mi2s-pri-default-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_sleep: mi2s-pri-sleep-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sec_mi2s_default: mi2s-sec-default-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			sec_mi2s_sleep: mi2s-sec-sleep-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcss_wlan_default: wcss-wlan-default-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "wcss_wlan";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8916";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "ext_mclk",
+				      "ext_pri_i2s",
+				      "ext_sec_i2s";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			status = "disabled";
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 4>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a98000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&xo_board>;
+				clock-names = "iface", "ref";
+			};
+		};
+
+		camss: camss@1b0ac00 {
+			compatible = "qcom,msm8916-camss";
+			reg = <0x01b0ac00 0x200>,
+				<0x01b00030 0x4>,
+				<0x01b0b000 0x200>,
+				<0x01b00038 0x4>,
+				<0x01b08000 0x100>,
+				<0x01b08400 0x100>,
+				<0x01b0a000 0x500>,
+				<0x01b00020 0x10>,
+				<0x01b10000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csid0",
+				"csid1",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csid0",
+				"csid1",
+				"ispif",
+				"vfe0";
+			power-domains = <&gcc VFE_GDSC>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+				<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+				<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI0_CLK>,
+				<&gcc GCC_CAMSS_CSI0PHY_CLK>,
+				<&gcc GCC_CAMSS_CSI0PIX_CLK>,
+				<&gcc GCC_CAMSS_CSI0RDI_CLK>,
+				<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+				<&gcc GCC_CAMSS_CSI1_CLK>,
+				<&gcc GCC_CAMSS_CSI1PHY_CLK>,
+				<&gcc GCC_CAMSS_CSI1PIX_CLK>,
+				<&gcc GCC_CAMSS_CSI1RDI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>,
+				<&gcc GCC_CAMSS_VFE0_CLK>,
+				<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+				<&gcc GCC_CAMSS_VFE_AHB_CLK>,
+				<&gcc GCC_CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&apps_iommu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		cci: cci@1b0c000 {
+			compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01b0c000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
+				<&gcc GCC_CAMSS_CCI_CLK>,
+				<&gcc GCC_CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb", "cci_ahb",
+					  "cci", "camss_ahb";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
+					  <&gcc GCC_CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <19200000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpu@1c00000 {
+			compatible = "qcom,adreno-306.0", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface",
+			    "alt_mem_iface",
+			    "gfx3d";
+			clocks =
+			    <&gcc GCC_OXILI_GFX3D_CLK>,
+			    <&gcc GCC_OXILI_AHB_CLK>,
+			    <&gcc GCC_OXILI_GMEM_CLK>,
+			    <&gcc GCC_BIMC_GFX_CLK>,
+			    <&gcc GCC_BIMC_GPU_CLK>,
+			    <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+			};
+		};
+
+		venus: video-codec@1d00000 {
+			compatible = "qcom,msm8916-venus";
+			reg = <0x01d00000 0xff000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&gcc VENUS_GDSC>;
+			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+				 <&gcc GCC_VENUS0_AHB_CLK>,
+				 <&gcc GCC_VENUS0_AXI_CLK>;
+			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
+			memory-region = <&venus_mem>;
+			status = "okay";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
+
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+			reg = <0x01ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
+
+			/* VFE */
+			iommu-ctx@3000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			/* GFX3D_USER */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* GFX3D_PRIV */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x400000>,
+			      <0x02c00000 0x400000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8916-mss-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			bam_dmux: bam-dmux {
+				compatible = "qcom,bam-dmux";
+
+				interrupt-parent = <&hexagon_smsm>;
+				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+				interrupt-names = "pc", "pc-ack";
+
+				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+				qcom,smem-state-names = "pc", "pc-ack";
+
+				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+				dma-names = "tx", "rx";
+
+				status = "disabled";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,smd-channels = "fastrpcsmd-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+					};
+				};
+			};
+		};
+
+		sound: sound@7702000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+		};
+
+		lpass: audio-controller@7708000 {
+			status = "disabled";
+			compatible = "qcom,apq8016-lpass-cpu";
+
+			/*
+			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
+			 * is actually only used by Tertiary MI2S while
+			 * Primary/Secondary MI2S both use the PRI_I2S_CLK.
+			 */
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
+
+			clock-names = "ahbix-clk",
+					"mi2s-bit-clk0",
+					"mi2s-bit-clk1",
+					"mi2s-bit-clk2",
+					"mi2s-bit-clk3",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk";
+			#sound-dai-cells = <1>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lpass_codec: audio-codec@771c000 {
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		blsp_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_uart1_default>;
+			pinctrl-1 = <&blsp_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_uart2_default>;
+			pinctrl-1 = <&blsp_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c1_default>;
+			pinctrl-1 = <&blsp_i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi1_default>;
+			pinctrl-1 = <&blsp_spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c2_default>;
+			pinctrl-1 = <&blsp_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi2_default>;
+			pinctrl-1 = <&blsp_spi2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c3_default>;
+			pinctrl-1 = <&blsp_i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi3_default>;
+			pinctrl-1 = <&blsp_spi3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c4_default>;
+			pinctrl-1 = <&blsp_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi4_default>;
+			pinctrl-1 = <&blsp_spi4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c5_default>;
+			pinctrl-1 = <&blsp_i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi5_default>;
+			pinctrl-1 = <&blsp_spi5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_i2c6_default>;
+			pinctrl-1 = <&blsp_i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp_spi6_default>;
+			pinctrl-1 = <&blsp_spi6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078d9000 0x200>,
+			      <0x078d9200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44>,
+								 <0x1 0x6b>,
+								 <0x2 0x24>,
+								 <0x3 0x13>;
+				};
+			};
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8916_VDDCX>,
+					<&rpmpd MSM8916_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcss_wlan_default>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		a53pll: clock@b016000 {
+			compatible = "qcom,msm8916-a53pll";
+			reg = <0x0b016000 0x40>;
+			#clock-cells = <0>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		timer@b020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b021000 0x1000>,
+				      <0x0b022000 0x1000>;
+			};
+
+			frame@b023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		cpu0_acc: power-manager@b088000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b088000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu0_saw: power-manager@b089000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b089000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_acc: power-manager@b098000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b098000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu1_saw: power-manager@b099000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b099000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_acc: power-manager@b0a8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0a8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu2_saw: power-manager@b0a9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_acc: power-manager@b0b8000 {
+			compatible = "qcom,msm8916-acc";
+			reg = <0x0b0b8000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+
+		cpu3_saw: power-manager@b0b9000 {
+			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>;
+			status = "reserved"; /* Controlled by PSCI firmware */
+		};
+	};
+
+	thermal-zones {
+		cpu0-1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu2_3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cam_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
new file mode 100644
index 000000000..adb96cd8d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * msm8939-pm8916.dtsi describes common properties (e.g. regulator connections)
+ * that apply to most devices that make use of the MSM8939 SoC and PM8916 PMIC.
+ * Many regulators have a fixed purpose in the original reference design and
+ * were rarely re-used for different purposes. Devices that deviate from the
+ * typical reference design should not make use of this include and instead add
+ * the necessary properties in the board-specific device tree.
+ */
+
+#include "msm8939.dtsi"
+#include "pm8916.dtsi"
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi0_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&pm8916_l2>;
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mdss_dsi1_phy {
+	vddio-supply = <&pm8916_l6>;
+};
+
+&mpss {
+	pll-supply = <&pm8916_l7>;
+};
+
+&pm8916_codec {
+	vdd-cdc-io-supply = <&pm8916_l5>;
+	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
+	vdd-micbias-supply = <&pm8916_l13>;
+};
+
+&rpm_requests {
+	pm8916_rpm_regulators: regulators {
+		compatible = "qcom,rpm-pm8916-regulators";
+		vdd_l1_l2_l3-supply = <&pm8916_s3>;
+		vdd_l4_l5_l6-supply = <&pm8916_s4>;
+		vdd_l7-supply = <&pm8916_s4>;
+
+		/* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */
+		/* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */
+		pm8916_s3: s3 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on; /* Needed for L2 */
+		};
+		pm8916_s4: s4 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-always-on; /* Needed for L5/L7 */
+		};
+
+		/*
+		 * Some of the regulators are unused or managed by another
+		 * processor (e.g. the modem). We should still define nodes for
+		 * them to ensure the vote from the application processor can be
+		 * dropped in case the regulators are already on during boot.
+		 *
+		 * The labels for these nodes are omitted on purpose because
+		 * boards should configure a proper voltage before using them.
+		 */
+		l1 {};
+
+		pm8916_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on; /* Needed for LPDDR RAM */
+		};
+
+		/* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */
+
+		l4 {};
+
+		pm8916_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for most digital I/O */
+		};
+
+		pm8916_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8916_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on; /* Needed for CPU PLL */
+		};
+
+		pm8916_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8916_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		l10 {};
+
+		pm8916_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8916_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8916_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		l14 {};
+		l15 {};
+		l16 {};
+		l17 {};
+		l18 {};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8916_l8>;
+	vqmmc-supply = <&pm8916_l5>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8916_l11>;
+	vqmmc-supply = <&pm8916_l12>;
+};
+
+&usb_hs_phy {
+	v1p8-supply = <&pm8916_l7>;
+	v3p3-supply = <&pm8916_l13>;
+};
+
+&wcnss {
+	vddpx-supply = <&pm8916_l7>;
+};
+
+&wcnss_iris {
+	vddxo-supply = <&pm8916_l7>;
+	vddrfa-supply = <&pm8916_s3>;
+	vddpa-supply = <&pm8916_l9>;
+	vdddig-supply = <&pm8916_l5>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
new file mode 100644
index 000000000..ba652909d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8939-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A7 (2015)";
+	compatible = "samsung,a7", "qcom,msm8939";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		/* Additional memory used by Samsung firmware modifications */
+		tz-apps@85500000 {
+			reg = <0x0 0x85500000 0x0 0xb00000>;
+			no-map;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_hall_sensor_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		button-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		button-home {
+			label = "Home";
+			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+		};
+	};
+
+	i2c-fg {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&fg_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		battery@35 {
+			compatible = "richtek,rt5033-battery";
+			reg = <0x35>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
+
+			pinctrl-0 = <&fg_alert_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	i2c-nfc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&nfc_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nfc@2b {
+			compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
+			reg = <0x2b>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-0 = <&nfc_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	i2c-sensor {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&sensor_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		accelerometer: accelerometer@10 {
+			compatible = "bosch,bmc150_accel";
+			reg = <0x10>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&pm8916_l17>;
+			vddio-supply = <&pm8916_l5>;
+
+			pinctrl-0 = <&accel_int_default>;
+			pinctrl-names = "default";
+
+			mount-matrix = "-1", "0", "0",
+					"0", "-1", "0",
+					"0", "0", "1";
+		};
+
+		magnetometer@12 {
+			compatible = "bosch,bmc150_magn";
+			reg = <0x12>;
+
+			vdd-supply = <&pm8916_l17>;
+			vddio-supply = <&pm8916_l5>;
+		};
+	};
+
+	i2c-tkey {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&tkey_i2c_default>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			/* Note: Actually an ABOV MCU that implements same interface */
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+
+			interrupt-parent = <&tlmm>;
+			interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+			vcc-supply = <&reg_touch_key>;
+			vdd-supply = <&reg_keyled>;
+			vddio-supply = <&pm8916_l6>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+
+			pinctrl-0 = <&tkey_default>;
+			pinctrl-names = "default";
+		};
+	};
+
+	pwm_vibrator: pwm-vibrator {
+		compatible = "clk-pwm";
+		#pwm-cells = <2>;
+
+		clocks = <&gcc GCC_GP2_CLK>;
+
+		pinctrl-0 = <&motor_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_keyled: regulator-keyled {
+		compatible = "regulator-fixed";
+		regulator-name = "keyled";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */
+		gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tkey_led_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&tkey_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tsp_vdd: regulator-tsp-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_vdd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&pm8916_s4>;
+
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_io_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vdd_tsp: regulator-vdd-tsp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_tsp";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tsp_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_vibrator: regulator-vibrator {
+		compatible = "regulator-fixed";
+		regulator-name = "motor_en";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&motor_en_default>;
+		pinctrl-names = "default";
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+
+		pwms = <&pwm_vibrator 0 100000>;
+		pwm-names = "enable";
+
+		vcc-supply = <&reg_vibrator>;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	muic: extcon@25 {
+		compatible = "siliconmitus,sm5502-muic";
+		reg = <0x25>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&muic_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+
+		reg = <0x24>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&reg_vdd_tsp>;
+		vddio-supply = <&reg_tsp_vdd>;
+
+		pinctrl-0 = <&tsp_int_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&blsp_uart2 {
+	status = "okay";
+};
+
+&pm8916_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8916_rpm_regulators {
+	pm8916_l17: l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&muic>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660b";
+};
+
+&tlmm {
+	accel_int_default: accel-int-default-state {
+		pins = "gpio115";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_alert_default: fg-alert-default-state {
+		pins = "gpio121";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fg_i2c_default: fg-i2c-default-state {
+		pins = "gpio105", "gpio106";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	motor_en_default: motor-en-default-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	motor_pwm_default: motor-pwm-default-state {
+		pins = "gpio50";
+		function = "gcc_gp2_clk_a";
+	};
+
+	muic_int_default: muic-int-default-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	nfc_default: nfc-default-state {
+		irq-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		nfc-pins {
+			pins = "gpio49", "gpio116";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	nfc_i2c_default: nfc-i2c-default-state {
+		pins = "gpio0", "gpio1";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_tsp_en_default: reg-tsp-en-default-state {
+		pins = "gpio73";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_tsp_io_en_default: reg-tsp-io-en-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sensor_i2c_default: sensor-i2c-default-state {
+		pins = "gpio84", "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_default: tkey-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_en_default: tkey-en-default-state {
+		pins = "gpio56";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_i2c_default: tkey-i2c-default-state {
+		pins = "gpio16", "gpio17";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default-state {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_default: tsp-int-default-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
new file mode 100644
index 000000000..89b6aebba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022-2023, Bryan O'Donoghue.
+ *
+ */
+
+/dts-v1/;
+
+#include "msm8939.dtsi"
+#include "msm8939-pm8916.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia M4 Aqua";
+	compatible = "sony,kanuti-tulip", "qcom,msm8939";
+	chassis-type = "handset";
+
+	qcom,board-id = <QCOM_BOARD_ID_MTP 0>;
+	qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		serial0 = &blsp_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb_id_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&tlmm {
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_id_default: usb-id-default-state {
+		pins = "gpio110";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usb {
+	extcon = <&usb_id>, <&usb_id>;
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&usb_id>;
+};
+
+&wcnss {
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3660";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
new file mode 100644
index 000000000..3fd64cafe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -0,0 +1,2437 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8939.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8939.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,gcc-msm8939.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	/*
+	 * Stock LK wants address-cells/size-cells = 2
+	 * A number of our drivers want address/size cells = 1
+	 * hence the disparity between top-level and /soc below.
+	 */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x100>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x101>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x102>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x103>;
+			next-level-cache = <&L2_1>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs1_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x0>;
+			qcom,acc = <&acc4>;
+			qcom,saw = <&saw4>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			qcom,acc = <&acc5>;
+			qcom,saw = <&saw5>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			qcom,acc = <&acc6>;
+			qcom,saw = <&saw6>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			qcom,acc = <&acc7>;
+			qcom,saw = <&saw7>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&apcs0_mbox>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <130>;
+				exit-latency-us = <150>;
+				min-residency-us = <2000>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	/*
+	 * MSM8939 has a big.LITTLE heterogeneous computing architecture,
+	 * consisting of two clusters of four ARM Cortex-A53s each. The
+	 * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs
+	 * at 1.5-1.7GHz.
+	 *
+	 * The enable method used here is spin-table which presupposes use
+	 * of a 2nd stage boot shim such as lk2nd to have installed a
+	 * spin-table, the downstream non-psci/non-spin-table method that
+	 * default msm8916/msm8936/msm8939 will not be supported upstream.
+	 */
+	cpu-map {
+		/* LITTLE (efficiency) cluster */
+		cluster0 {
+			core0 {
+				cpu = <&CPU4>;
+			};
+
+			core1 {
+				cpu = <&CPU5>;
+			};
+
+			core2 {
+				cpu = <&CPU6>;
+			};
+
+			core3 {
+				cpu = <&CPU7>;
+			};
+		};
+
+		/* big (performance) cluster */
+		/* Boot CPU is cluster 1 core 0 */
+		cluster1 {
+			core0 {
+				cpu = <&CPU0>;
+			};
+
+			core1 {
+				cpu = <&CPU1>;
+			};
+
+			core2 {
+				cpu = <&CPU2>;
+			};
+
+			core3 {
+				cpu = <&CPU3>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8936-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1_mbox 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8936";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clock-names = "xo";
+					clocks = <&xo_board>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8939-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz-apps@86000000 {
+			reg = <0x0 0x86000000 0x0 0x300000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		hypervisor@86400000 {
+			reg = <0x0 0x86400000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz@86500000 {
+			reg = <0x0 0x86500000 0x0 0x180000>;
+			no-map;
+		};
+
+		reserved@86680000 {
+			reg = <0x0 0x86680000 0x0 0x80000>;
+			no-map;
+		};
+
+		rmtfs@86700000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x86700000 0x0 0xe0000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		rfsa@867e0000 {
+			reg = <0x0 0x867e0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x5500000>;
+			no-map;
+		};
+
+		wcnss_mem: wcnss@8bd00000 {
+			reg = <0x0 0x8bd00000 0x0 0x600000>;
+			no-map;
+		};
+
+		venus_mem: venus@8c300000 {
+			reg = <0x0 0x8c300000 0x0 0x800000>;
+			no-map;
+		};
+
+		mba_mem: mba@8cb00000 {
+			reg = <0x0 0x8cb00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1_mbox 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		hexagon_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1_mbox 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs1_mbox 8 13>;
+		qcom,ipc-3 = <&apcs1_mbox 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		qfprom: qfprom@5c000 {
+			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
+			reg = <0x0005c000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@a0 {
+				reg = <0xa0 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s6_p1: s6-p1@a1 {
+				reg = <0xa1 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p2: s6-p2@a1 {
+				reg = <0xa1 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s7_p1: s7-p1@a2 {
+				reg = <0xa2 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p2: s7-p2@a3 {
+				reg = <0xa3 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s8_p1: s8-p1@a4 {
+				reg = <0xa4 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s8_p2: s8-p2@a4 {
+				reg = <0xa4 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s9_p1: s9-p1@a5 {
+				reg = <0xa5 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s9_p2: s9-p2@a6 {
+				reg = <0xa6 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@a7 {
+				reg = <0xa7 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@d0 {
+				reg = <0xd0 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@d0 {
+				reg = <0xd0 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p1@d1 {
+				reg = <0xd1 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@d1 {
+				reg = <0xd1 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@d2 {
+				reg = <0xd2 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@d3 {
+				reg = <0xd3 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@d4 {
+				reg = <0xd4 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@d4 {
+				reg = <0xd4 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@d5 {
+				reg = <0xd5 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s5_p1: s5-p1@d6 {
+				reg = <0xd6 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s5_p2: s5-p2@d7 {
+				reg = <0xd7 0x1>;
+				bits = <1 6>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8939-bimc";
+			reg = <0x00400000 0x62000>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+			#interconnect-cells = <1>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2";
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8939-pcnoc";
+			reg = <0x00500000 0x11000>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+			#interconnect-cells = <1>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8939-snoc";
+			reg = <0x00580000 0x14080>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+			#interconnect-cells = <1>;
+
+			snoc_mm: interconnect-snoc {
+				compatible = "qcom,msm8939-snoc-mm";
+				clock-names = "bus", "bus_a";
+				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
+					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
+				#interconnect-cells = <1>;
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8916-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 122>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp_i2c1_default: blsp-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_default: blsp-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_default: blsp-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_default: blsp-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_default: blsp-i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_default: blsp-i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp_spi1_default: blsp-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi1_sleep: blsp-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi2_default: blsp-spi2-default-state {
+				spi-pins {
+					pins = "gpio4", "gpio5", "gpio7";
+					function = "blsp_spi2";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio6";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi2_sleep: blsp-spi2-sleep-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi3_default: blsp-spi3-default-state {
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi3_sleep: blsp-spi3-sleep-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi4_default: blsp-spi4-default-state {
+				spi-pins {
+					pins = "gpio12", "gpio13", "gpio15";
+					function = "blsp_spi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio14";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi4_sleep: blsp-spi4-sleep-state {
+				pins = "gpio12", "gpio13", "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi5_default: blsp-spi5-default-state {
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi5_sleep: blsp-spi5-sleep-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_spi6_default: blsp-spi6-default-state {
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp_spi6_sleep: blsp-spi6-sleep-state {
+				pins = "gpio20", "gpio21", "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart1_default: blsp-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart1_sleep: blsp-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp_uart2_default: blsp-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp_uart2_sleep: blsp-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			camera_front_default: camera-front-default-state {
+				pwdn-pins {
+					pins = "gpio33";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				rst-pins {
+					pins = "gpio28";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				mclk1-pins {
+					pins = "gpio27";
+					function = "cam_mclk1";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera_rear_default: camera-rear-default-state {
+				pwdn-pins {
+					pins = "gpio34";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				rst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				mclk0-pins {
+					pins = "gpio26";
+					function = "cam_mclk0";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cdc_dmic_default: cdc-dmic-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <8>;
+				};
+
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <8>;
+				};
+			};
+
+			cdc_dmic_sleep: cdc-dmic-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "dmic0_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1";
+					function = "dmic0_data";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cdc_pdm_default: cdc-pdm-default-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cdc_pdm_sleep: cdc-pdm-sleep-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				function = "cdc_pdm0";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pri_mi2s_default: mi2s-pri-default-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_sleep: mi2s-pri-sleep-state {
+				pins = "gpio113", "gpio114", "gpio115", "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
+				pins = "gpio116";
+				function = "pri_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
+				pins = "gpio110";
+				function = "pri_mi2s_ws";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sec_mi2s_default: mi2s-sec-default-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			sec_mi2s_sleep: mi2s-sec-sleep-state {
+				pins = "gpio112", "gpio117", "gpio118", "gpio119";
+				function = "sec_mi2s";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcss_wlan_default: wcss-wlan-default-state {
+				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "wcss_wlan";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8939";
+			reg = <0x01800000 0x80000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "ext_mclk",
+				      "ext_pri_i2s",
+				      "ext_sec_i2s";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8916", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ac8000 0x3000>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@1a01000 {
+				compatible = "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 4>;
+
+				interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+						<&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>;
+				interconnect-names = "mdp0-mem", "mdp1-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_mdp_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_mdp_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a98000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01a98000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a98300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01a98300 0xd4>,
+				      <0x01a98500 0x280>,
+				      <0x01a98780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1aa0000 {
+				compatible = "qcom,msm8916-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x01aa0000 0x25c>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+				phys = <&mdss_dsi1_phy>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdss_mdp_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1aa0300 {
+				compatible = "qcom,dsi-phy-28nm-lp";
+				reg = <0x01aa0300 0xd4>,
+				      <0x01aa0500 0x280>,
+				      <0x01aa0780 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpu@1c00000 {
+			compatible = "qcom,adreno-405.0", "qcom,adreno";
+			reg = <0x01c00000 0x10000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names = "core",
+				      "iface",
+				      "mem",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gfx3d",
+				      "rbbmtimer";
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_OXILI_GMEM_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc GFX3D_CLK_SRC>,
+				 <&gcc GCC_OXILI_TIMER_CLK>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+
+			opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-550000000 {
+					opp-hz = /bits/ 64 <550000000>;
+				};
+
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+				};
+
+				opp-220000000 {
+					opp-hz = /bits/ 64 <220000000>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+				};
+			};
+		};
+
+		apps_iommu: iommu@1ef0000 {
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			reg = <0x01ef0000 0x3000>;
+			ranges = <0 0x01e20000 0x20000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			qcom,iommu-secure-id = <17>;
+
+			/* mdp_0: */
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* venus_ns: */
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>,
+				 <&gcc GCC_GFX_TBU_CLK>;
+			clock-names = "iface", "bus", "tbu";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			qcom,iommu-secure-id = <18>;
+
+			/* gfx3d_user: */
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* gfx3d_priv: */
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x400000>,
+			      <0x02c00000 0x400000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8916-mss-pil";
+			reg = <0x04080000 0x100>, <0x04020000 0x040>;
+			reg-names = "qdsp6", "rmb";
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "bus",
+				      "mem",
+				      "xo";
+			power-domains = <&rpmpd MSM8939_VDDMDCX>,
+					<&rpmpd MSM8939_VDDMX>;
+			power-domain-names = "cx", "mx";
+			qcom,smem-states = <&hexagon_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+			resets = <&scm 0>;
+			reset-names = "mss_restart";
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				mboxes = <&apcs1_mbox 12>;
+				qcom,remote-pid = <1>;
+
+				label = "hexagon";
+			};
+		};
+
+		sound: sound@7702000 {
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>,
+			      <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+			status = "disabled";
+		};
+
+		lpass: audio-controller@7708000 {
+			compatible = "qcom,apq8016-lpass-cpu";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif";
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
+			clock-names = "ahbix-clk",
+				      "mi2s-bit-clk0",
+				      "mi2s-bit-clk1",
+				      "mi2s-bit-clk2",
+				      "mi2s-bit-clk3",
+				      "pcnoc-mport-clk",
+				      "pcnoc-sway-clk";
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lpass_codec: audio-codec@771c000 {
+			compatible = "qcom,msm8916-wcd-digital-codec";
+			reg = <0x0771c000 0x400>;
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "ahbix-clk", "mclk";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x23000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		blsp_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_uart1_default>;
+			pinctrl-1 = <&blsp_uart1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_uart2_default>;
+			pinctrl-1 = <&blsp_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c1_default>;
+			pinctrl-1 = <&blsp_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi1_default>;
+			pinctrl-1 = <&blsp_spi1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c2_default>;
+			pinctrl-1 = <&blsp_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi2: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi2_default>;
+			pinctrl-1 = <&blsp_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c3_default>;
+			pinctrl-1 = <&blsp_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x500>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi3_default>;
+			pinctrl-1 = <&blsp_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c4_default>;
+			pinctrl-1 = <&blsp_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi4: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi4_default>;
+			pinctrl-1 = <&blsp_spi4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c5_default>;
+			pinctrl-1 = <&blsp_i2c5_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi5: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi5_default>;
+			pinctrl-1 = <&blsp_spi5_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_i2c6_default>;
+			pinctrl-1 = <&blsp_i2c6_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi6: spi@78ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078ba000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp_spi6_default>;
+			pinctrl-1 = <&blsp_spi6_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78d9000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078d9000 0x200>,
+			      <0x078d9200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			#reset-cells = <1>;
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			adp-disable;
+			hnp-disable;
+			srp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8916",
+						     "qcom,usb-hs-phy";
+					clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+						 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					#phy-cells = <0>;
+					qcom,init-seq = /bits/ 8 <0x0 0x44>,
+								 <0x1 0x6b>,
+								 <0x2 0x24>,
+								 <0x3 0x13>;
+				};
+			};
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			power-domains = <&rpmpd MSM8939_VDDCX>,
+					<&rpmpd MSM8939_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcss_wlan_default>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+				qcom,ipc = <&apcs1_mbox 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>,
+								   <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
+			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apcs1_mbox: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+			assigned-clocks = <&apcs2>;
+			assigned-clock-rates = <297600000>;
+			#mbox-cells = <1>;
+		};
+
+		a53pll_c1: clock@b016000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b016000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		acc0: clock-controller@b088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b088000 0x1000>;
+		};
+
+		saw0: power-manager@b089000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b089000 0x1000>;
+		};
+
+		acc1: clock-controller@b098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b098000 0x1000>;
+		};
+
+		saw1: power-manager@b099000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b099000 0x1000>;
+		};
+
+		acc2: clock-controller@b0a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0a8000 0x1000>;
+		};
+
+		saw2: power-manager@b0a9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0a9000 0x1000>;
+		};
+
+		acc3: clock-controller@b0b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b0b8000 0x1000>;
+		};
+
+		saw3: power-manager@b0b9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b0b9000 0x1000>;
+		};
+
+		apcs0_mbox: mailbox@b111000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b111000 0x1000>;
+			clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+			#mbox-cells = <1>;
+		};
+
+		a53pll_c0: clock@b116000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b116000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		acc4: clock-controller@b188000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b188000 0x1000>;
+		};
+
+		saw4: power-manager@b189000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b189000 0x1000>;
+		};
+
+		acc5: clock-controller@b198000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b198000 0x1000>;
+		};
+
+		saw5: power-manager@b199000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b199000 0x1000>;
+		};
+
+		acc6: clock-controller@b1a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b1a8000 0x1000>;
+		};
+
+		saw6: power-manager@b1a9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b1a9000 0x1000>;
+		};
+
+		acc7: clock-controller@b1b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0x0b1b8000 0x1000>;
+		};
+
+		saw7: power-manager@b1b9000 {
+			compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2";
+			reg = <0x0b1b9000 0x1000>;
+		};
+
+		a53pll_cci: clock@b1d0000 {
+			compatible = "qcom,msm8939-a53pll";
+			reg = <0x0b1d0000 0x40>;
+			#clock-cells = <0>;
+		};
+
+		apcs2: mailbox@b1d1000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b1d1000 0x1000>;
+			clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "pll", "aux", "ref";
+			#clock-cells = <0>;
+			#mbox-cells = <1>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu1_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu2_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu3_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4567-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu4567_alert: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4567_crit: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4567_alert>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				modem1_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				modem2_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cam_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
new file mode 100644
index 000000000..711d84dad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Sireesh Kodali
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola G5 Plus";
+	compatible = "motorola,potter", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x46 0x83a0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (2220 * 1920 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+
+		reserved@aefd2000 {
+			reg = <0x0 0xaefd2000 0x0 0x2e000>;
+			no-map;
+		};
+
+		reserved@eefe4000 {
+			reg = <0x0 0xeefe4000 0x0 0x1c000>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0x80000>;
+			console-size = <0x40000>;
+			ftrace-size = <0>;
+			record-size = <0x3f800>;
+			pmsg-size = <0x800>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@20 {
+		reg = <0x20>;
+		compatible = "syna,rmi4-i2c";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset>;
+
+		vdd-supply = <&pm8953_l22>;
+		vio-supply = <&pm8953_l6>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <500>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,current-limit-microamp = <25000>;
+	qcom,num-strings = <3>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-always-on;
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>;
+
+	ts_reset: ts-reset-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
new file mode 100644
index 000000000..a5957e79b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alejandro Tafalla
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &adsp_fw_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &wcnss_fw_mem;
+
+/ {
+	model = "Xiaomi Mi A2 Lite";
+	compatible = "xiaomi,daisy", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x1000b 0x9>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 2280 * 3)>;
+
+			width = <1080>;
+			height = <2280>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1200000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x700000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are
+	 * normally proxied via ADSP firmware. GPIOs aren't protected.
+	 */
+	i2c-sensors {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imu@6a {
+			compatible = "st,lsm6dsl";
+			reg = <0x6a>;
+			vdd-supply = <&pm8953_l10>;
+			vddio-supply = <&pm8953_l6>;
+			mount-matrix = "-1", "0", "0",
+					"0", "-1", "0",
+					"0", "0", "1";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	speaker_codec: audio-codec@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+
+		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <1>;
+		maxim,interleave-mode;
+
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2280>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+};
+
+&uart_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
new file mode 100644
index 000000000..6b9245cd8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi Note 4X";
+	compatible = "xiaomi,mido", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <11 0>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x00100000>;
+			console-size = <0x100000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+		vdd_l23-supply = <&pm8953_s3>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
new file mode 100644
index 000000000..9ac4f507e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Danila Tikhonov <JIaxyga@protonmail.com>
+ * Copyright (c) 2022, Anton Bambura <jenneron@protonmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &adsp_fw_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &wcnss_fw_mem;
+
+/ {
+	model = "Xiaomi Mi A1";
+	compatible = "xiaomi,tissot", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1200000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x700000>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x00100000>;
+			record-size = <0x1000>;
+			console-size = <0x80000>;
+			ftrace-size = <0x1000>;
+			pmsg-size = <0x8000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	max98927_codec: audio-codec@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+
+		reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <1>;
+
+		#sound-dai-cells = <0>;
+	};
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10:l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+
+	gpio_hall_sensor_default: gpio-hall-sensor-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
new file mode 100644
index 000000000..b0588f30f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Eugene Lepshy <fekz115@gmail.com>
+ * Copyright (c) 2022, Gianluca Boiano <morf3089@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &adsp_fw_mem;
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+/delete-node/ &wcnss_fw_mem;
+
+/ {
+	model = "Xiaomi Redmi 5 Plus";
+	compatible = "xiaomi,vince", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x1000b 0x08>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1200000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e800000 {
+			reg = <0x0 0x8e800000 0x0 0x700000>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x80000>;
+			ftrace-size = <0x1000>;
+			pmsg-size = <0x8000>;
+		};
+	};
+
+	/*
+	 * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are
+	 * normally proxied via ADSP firmware. GPIOs aren't protected.
+	 */
+	i2c-sensors {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imu@6a {
+			compatible = "st,lsm6dsl";
+			reg = <0x6a>;
+			vdd-supply = <&pm8953_l10>;
+			vddio-supply = <&pm8953_l6>;
+			mount-matrix = "1", "0", "0",
+					"0", "-1", "0",
+					"0", "0", "1";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l5>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-max-microamp = <5000>;
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@20 {
+		reg = <0x20>;
+		compatible = "syna,rmi4-i2c";
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&pm8953_l10>;
+		vio-supply = <&pm8953_l6>;
+
+		pinctrl-names = "init", "suspend";
+		pinctrl-0 = <&ts_reset_active &ts_int_active>;
+		pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <500>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <20>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1380000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_suspend: ts-reset-suspend-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_suspend: ts-int-suspend-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart_console_active>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
new file mode 100644
index 000000000..e7de76326
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -0,0 +1,1922 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		L2_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		L2_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8953", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8953";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8953-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		zap_shader_region: zap@81800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x81800000 0x0 0x2000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem_mem: smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x6a00000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1100000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: wcnss@8e700000 {
+			reg = <0x0 0x8e700000 0x0 0x700000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps-data@90000000 {
+			reg = <0 0x90000000 0 0x1000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 0x13ff000>;
+			no-map;
+		};
+
+		venus_mem: venus@91400000 {
+			reg = <0x0 0x91400000 0x0 0x700000>;
+			no-map;
+		};
+
+		mba_mem: mba@92000000 {
+			reg = <0x0 0x92000000 0x0 0x100000>;
+			no-map;
+		};
+
+		rmtfs@f2d00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf2d00000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		smp2p_wcnss_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_wcnss_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		hsusb_phy: phy@79000 {
+			compatible = "qcom,msm8953-qusb2-phy";
+			reg = <0x00079000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_QUSB_REF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>;
+
+			resets = <&gcc GCC_QUSB2_PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8953-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 142>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart_console_active: uart-console-active-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			uart_console_sleep: uart-console-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_clk_on: sdc1-clk-on-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: sdc1-clk-off-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: sdc1-cmd-on-state {
+				pins = "sdc1_cmd";
+				bias-disable;
+				drive-strength = <10>;
+			};
+
+			sdc1_cmd_off: sdc1-cmd-off-state {
+				pins = "sdc1_cmd";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: sdc1-data-on-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc1_data_off: sdc1-data-off-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: sdc1-rclk-on-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: sdc1-rclk-off-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc2_clk_on: sdc2-clk-on-state {
+				pins = "sdc2_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			sdc2_clk_off: sdc2-clk-off-state {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc2_cmd_on: sdc2-cmd-on-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_cmd_off: sdc2-cmd-off-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_data_on: sdc2-data-on-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_data_off: sdc2-data-off-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_cd_on: cd-on-state {
+				pins = "gpio133";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc2_cd_off: cd-off-state {
+				pins = "gpio133";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			gpio_key_default: gpio-key-default-state {
+				pins = "gpio85";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c_1_default: i2c-1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_1_sleep: i2c-1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_2_default: i2c-2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_2_sleep: i2c-2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_3_default: i2c-3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_3_sleep: i2c-3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_4_default: i2c-4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_4_sleep: i2c-4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_5_default: i2c-5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_5_sleep: i2c-5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_6_default: i2c-6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_6_sleep: i2c-6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_7_default: i2c-7-default-state {
+				pins = "gpio135", "gpio136";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_7_sleep: i2c-7-sleep-state {
+				pins = "gpio135", "gpio136";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_8_default: i2c-8-default-state {
+				pins = "gpio98", "gpio99";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_8_sleep: i2c-8-sleep-state {
+				pins = "gpio98", "gpio99";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8953";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
+			clock-names = "xo",
+				      "sleep",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8953", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		tcsr_phy_clk_scheme_sel: syscon@193f044 {
+			compatible = "qcom,tcsr-msm8953", "syscon";
+			reg = <0x0193f044 0x4>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys";
+
+			power-domains = <&gcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				power-domains = <&gcc MDSS_GDSC>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x01a94400 0x100>,
+				      <0x01a94500 0x300>,
+				      <0x01a94800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1a96400 {
+				compatible = "qcom,dsi-phy-14nm-8953";
+				reg = <0x01a96400 0x100>,
+				      <0x01a96500 0x300>,
+				      <0x01a96800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
+			ranges  = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_ASYNC_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			interrupt-controller;
+
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,msm8953-mss-pil";
+			reg = <0x04080000 0x100>,
+			      <0x04020000 0x040>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>,
+					<&rpmpd MSM8953_VDDMX>,
+					<&rpmpd MSM8953_VDDMD>;
+			power-domain-names = "cx", "mx","mss";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "xo";
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_BCR>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,smd-edge = <0>;
+				qcom,ipc = <&apcs 8 12>;
+				qcom,remote-pid = <1>;
+
+				label = "modem";
+			};
+		};
+
+		usb3: usb@70f8800 {
+			compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
+			reg = <0x070f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_PCNOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133330000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			status = "disabled";
+
+			usb3_dwc3: usb@7000000 {
+				compatible = "snps,dwc3";
+				reg = <0x07000000 0xcc00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy>;
+				phy-names = "usb2-phy";
+
+				snps,usb2-gadget-lpm-disable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x00>;
+
+				maximum-speed = "high-speed";
+			};
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			mmc-hs400-1_8v;
+			mmc-hs200-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table-sdhc1 {
+				compatible = "operating-points-v2";
+
+				opp-25000000 {
+					opp-hz = /bits/ 64 <25000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+			reg = <0x07864900 0x500>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table-sdhc2 {
+				compatible = "operating-points-v2";
+
+				opp-25000000 {
+					opp-hz = /bits/ 64 <25000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-177770000 {
+					opp-hz = /bits/ 64 <177770000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			num-channels = <12>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			qcom,controlled-remotely;
+		};
+
+		uart_0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+
+			status = "disabled";
+		};
+
+		i2c_1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_1_default>;
+			pinctrl-1 = <&i2c_1_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_2_default>;
+			pinctrl-1 = <&i2c_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_3_default>;
+			pinctrl-1 = <&i2c_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_4_default>;
+			pinctrl-1 = <&i2c_4_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			num-channels = <12>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			qcom,controlled-remotely;
+		};
+
+		i2c_5: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_5_default>;
+			pinctrl-1 = <&i2c_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_6: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_6_default>;
+			pinctrl-1 = <&i2c_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_7: i2c@7af7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af7000 0x600>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_7_default>;
+			pinctrl-1 = <&i2c_7_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_8: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_8_default>;
+			pinctrl-1 = <&i2c_8_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+			reg-names = "ccu", "dxe", "pmu";
+
+			memory-region = <&wcnss_fw_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>,
+					<&rpmpd MSM8953_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&smp2p_wcnss_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wcnss_pin_a>;
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				/* Separate chip, compatible is board-specific */
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		lpass: remoteproc@c200000 {
+			compatible = "qcom,msm8953-adsp-pil";
+			reg = <0x0c200000 0x100>;
+
+			interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&adsp_fw_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6core: service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+
+							dai@16 {
+								reg = <PRIMARY_MI2S_RX>;
+								qcom,sd-lines = <0 1>;
+							};
+							dai@20 {
+								reg = <TERTIARY_MI2S_TX>;
+								qcom,sd-lines = <0 1>;
+							};
+							dai@127 {
+								reg = <QUINARY_MI2S_RX>;
+								qcom,sd-lines = <0>;
+							};
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+
+							dai@0 {
+								reg = <0>;
+								direction = <Q6ASM_DAI_RX>;
+							};
+							dai@1 {
+								reg = <1>;
+								direction = <Q6ASM_DAI_TX>;
+							};
+							dai@2 {
+								reg = <2>;
+								direction = <Q6ASM_DAI_RX>;
+							};
+							dai@3 {
+								reg = <3>;
+								direction = <Q6ASM_DAI_RX>;
+								is-compress-dai;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 9>;
+			trips {
+				cpu0_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 10>;
+			trips {
+				cpu1_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 11>;
+			trips {
+				cpu2_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 12>;
+			trips {
+				cpu3_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 4>;
+			trips {
+				cpu4_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 5>;
+			trips {
+				cpu5_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 6>;
+			trips {
+				cpu6_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 7>;
+			trips {
+				cpu7_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
new file mode 100644
index 000000000..3fb8e23e4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-kugo.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X Compact";
+	compatible = "sony,kugo-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	/* FUSB301 USB-C Controller */
+};
+
+&blsp2_i2c4 {
+	status = "okay";
+
+	/* ST STMVL53L0 ToF @ 29 */
+	/* AMS TCS349 RGBCIR @ 72 */
+};
+
+&pm8950_l1 {
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1300000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
new file mode 100644
index 000000000..87d657f68
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire-suzu.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8956-sony-xperia-loire.dtsi"
+
+/ {
+	model = "Sony Xperia X";
+	compatible = "sony,suzu-row", "qcom,msm8956";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
new file mode 100644
index 000000000..085d79542
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8956.dtsi"
+
+#include "pm8004.dtsi"
+#include "pm8950.dtsi"
+#include "pmi8950.dtsi"
+
+/ {
+	qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+		mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		cont-splash@83000000 {
+			reg = <0x0 0x83000000 0x0 0x2800000>;
+		};
+
+		ramoops@57f00000 {
+			compatible = "ramoops";
+			reg = <0 0x57f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	usbphy_1p2: regulator-usbphy-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usbphy-1p2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vph_pwr>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c4 {
+	status = "okay";
+
+	/* Synaptics RMI4 @ 2c */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&gcc {
+	vdd_gfx-supply = <&pm8004_s5>;
+};
+
+&otg {
+	status = "okay";
+};
+
+&pm8004_spmi_regulators {
+	vdd_s2-supply = <&vph_pwr>;
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 1 supply */
+	pm8004_s2: s2 {
+		/* regulator-min-microvolt = <500000>; */
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc1";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pm8004_s5: s5 {
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-enable-ramp-delay = <500>;
+		regulator-name = "vdd_gfx";
+		/* Hack this on until the gpu driver is ready for it */
+		regulator-always-on;
+	};
+};
+
+&pm8950_spmi_regulators {
+	vdd_s5-supply = <&vph_pwr>;
+
+	/* Cluster 0 supply */
+	pm8950_spmi_s5: s5 {
+		/* Set .95V to prevent unstabilities until CPR for this SoC is done */
+		/* regulator-min-microvolt = <790000>; */
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1165000>;
+		regulator-name = "vdd_apc0";
+		/* Set always on until the CPU PLL is done */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	pm8950_regulators: regulators {
+		compatible = "qcom,rpm-pm8950-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_l1_l19-supply = <&pm8950_s3>;
+		vdd_l2_l23-supply = <&pm8950_s3>;
+		vdd_l3-supply = <&pm8950_s3>;
+		vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+
+		pm8950_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1162500>;
+		};
+
+		pm8950_s3: s3 {
+			regulator-min-microvolt = <1325000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-always-on;
+		};
+
+		pm8950_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8950_l1: l1 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8950_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8950_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <290000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-system-load = <130000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l9: l9 {
+			regulator-min-microvolt = <2000000>;
+			regulator-max-microvolt = <2400000>;
+		};
+
+		pm8950_l10: l10 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <60000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		pm8950_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8950_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8950_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8950_l17: l17 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8950_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8950_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	/* Toshiba THGBMHG8C4LBAU7 (032G34) */
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&pm8950_l8>;
+	vqmmc-supply = <&pm8950_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	bus-width = <4>;
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8950_l11>;
+	vqmmc-supply = <&pm8950_l12>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+};
+
+&usb_hs_phy {
+	vdd-supply = <&usbphy_1p2>;
+	vdda1p8-supply = <&pm8950_l7>;
+	vdda3p3-supply = <&pm8950_l13>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8956.dtsi b/arch/arm64/boot/dts/qcom/msm8956.dtsi
new file mode 100644
index 000000000..668e05185
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8956.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include "msm8976.dtsi"
+
+&pmu {
+	interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+};
+
+&tsens {
+	compatible = "qcom,msm8956-tsens", "qcom,tsens-v1";
+};
+
+/*
+ * You might be wondering.. why is it so empty out there?
+ * Well, the SoCs are almost identical.
+ */
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
new file mode 100644
index 000000000..4c5be22b4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -0,0 +1,1354 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
+ *                          <angelogioacchino.delregno@collabora.com>
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8976.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&little_cpu_sleep_0>;
+			capacity-dmips-mhz = <573>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&l2_1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			little_cpu_sleep_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <181>;
+				exit-latency-us = <149>;
+				min-residency-us = <703>;
+				local-timer-stop;
+			};
+
+			big_cpu_sleep_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-retention";
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <142>;
+				exit-latency-us = <99>;
+				min-residency-us = <242>;
+			};
+
+			big_cpu_sleep_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <158>;
+				exit-latency-us = <144>;
+				min-residency-us = <863>;
+				local-timer-stop;
+			};
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8976", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8976-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8976";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8976", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8976-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+
+						rpmpd_opp_turbo_high: opp111 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_HIGH>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ext-region@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x800000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x5600000>;
+			no-map;
+		};
+
+		lpass_mem: lpass@8c200000 {
+			reg = <0x0 0x8c200000 0x0 0x1800000>;
+			no-map;
+		};
+
+		venus_mem: memory@8da00000 {
+			reg = <0x0 0x8da00000 0x0 0x2600000>;
+			no-map;
+		};
+
+		tz-apps@8dd00000 {
+			reg = <0x0 0x8dd00000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	smp2p-hexagon {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+		qcom,smem = <443>, <429>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+		qcom,smem = <435>, <428>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+		qcom,smem = <451>, <431>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x140>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc RST_QUSB2_PHY_BCR>,
+				 <&gcc RST_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8976-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@218 {
+				reg = <0x218 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s0_p1: s0-p1@219 {
+				reg = <0x219 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s0_p2: s0-p2@219 {
+				reg = <0x219 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s1_p1: s1-p1@21a {
+				reg = <0x21a 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@21b {
+				reg = <0x21b 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p1: s2-p1@21c {
+				reg = <0x21c 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2: s2-p2@21c {
+				reg = <0x21c 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@21d {
+				reg = <0x21d 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@21e {
+				reg = <0x21e 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@220 {
+				reg = <0x220 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s4_p1: s4-p1@221 {
+				reg = <0x221 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s4_p2: s4-p2@221 {
+				reg = <0x221 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s5_p1: s5-p1@222 {
+				reg = <0x222 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s5_p2: s5-p2@223 {
+				reg = <0x224 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s6_p1: s6-p1@224 {
+				reg = <0x224 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s6_p2: s6-p2@224 {
+				reg = <0x224 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s7_p1: s7-p1@225 {
+				reg = <0x225 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s7_p2: s7-p2@226 {
+				reg = <0x226 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_mode: mode@228 {
+				reg = <0x228 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s8_p1: s8-p1@228 {
+				reg = <0x228 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s8_p2: s8-p2@229 {
+				reg = <0x229 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@229 {
+				reg = <0x229 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s9_p2: s9-p2@22a {
+				reg = <0x22a 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s10_p1: s10-p1@22b {
+				reg = <0x22b 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s10_p2: s10-p2@22c {
+				reg = <0x22c 0x1>;
+				bits = <1 6>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8976-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8976-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 145>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			spi1_default: spi0-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "blsp_spi1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			spi1_sleep: spi0-sleep-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart2_active: blsp2-uart2-active-state {
+				pins = "gpio20", "gpio21";
+				function = "blsp_uart6";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio20", "gpio21";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			/* 4 (not 6!) interfaces per QUP, BLSP2 indexes are numbered (n)+4 */
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8976";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			assigned-clocks = <&gcc GPLL3>;
+			assigned-clock-rates = <1100000000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "xo_a",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,msm8976-tcsr", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x1000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi1_default>;
+			pinctrl-1 = <&spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		otg: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc RST_USB_HS_BCR>;
+			reset-names = "core";
+			ahb-burst-config = <0>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		sdhc_3: mmc@7a24900 {
+			compatible = "qcom,msm8976-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07a24900 0x11c>, <0x07a24000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC3_AHB_CLK>,
+				 <&gcc GCC_SDCC3_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart2: serial@7af0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07af0000 0x200>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c4: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c4_default>;
+			pinctrl-1 = <&blsp2_i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8976-apcs-kpss-global",
+				     "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>, <0x0b122000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		imem: sram@8600000 {
+			compatible = "qcom,msm8976-imem", "syscon", "simple-mfd";
+			reg = <0x08600000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		qdsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+			trips {
+				qdsp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cam-isp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+			trips {
+				cam_isp_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu4_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu5_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu6_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu7_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		big-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				l2_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				l2_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				l2_crit: l2-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				gpu_alert1: trip-point1 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
new file mode 100644
index 000000000..4159fc355
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+ */
+
+/dts-v1/;
+
+#include "msm8992-lg-bullhead.dtsi"
+
+/ {
+	model = "LG Nexus 5X rev 1.0";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xa64 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
new file mode 100644
index 000000000..ad9702dd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+ */
+
+/dts-v1/;
+
+#include "msm8992-lg-bullhead.dtsi"
+
+/ {
+	model = "LG Nexus 5X rev 1.01";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xb64 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
new file mode 100644
index 000000000..b8f2a01bc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, LGE Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+
+/* cont_splash_mem has different memory mapping */
+/delete-node/ &cont_splash_mem;
+
+/* disabled on downstream, conflicts with cont_splash_mem */
+/delete-node/ &dfps_data_mem;
+
+/ {
+	model = "LG Nexus 5X";
+	compatible = "lg,bullhead", "qcom,msm8992";
+	chassis-type = "handset";
+
+	qcom,msm-id = <251 0>, <252 0>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+
+	/* Bullhead firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@1ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x1ff00000 0x0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cont_splash_mem: memory@3400000 {
+			reg = <0 0x03400000 0 0xc00000>;
+			no-map;
+		};
+
+		reserved@5000000 {
+			reg = <0x0 0x05000000 0x0 0x1a00000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vph_pwr>;
+		vdd_l20_21-supply = <&vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pmi8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts
new file mode 100644
index 000000000..8933b5369
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+	model = "Microsoft Lumia 950";
+	compatible = "microsoft,talkman", "qcom,msm8992";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 000000000..5fe5de9ce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	model = "Xiaomi Mi 4C";
+	compatible = "xiaomi,libra", "qcom,msm8992";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0>, <252 0>;
+	qcom,pmic-id = <65545 65546 0 0>;
+	qcom,board-id = <12 0>;
+
+	/* This enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0 maxcpus=1";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@3400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x3400000 0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+			/*
+			 * That's a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet..
+			 */
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		memory_hole: hole@6400000 {
+			reg = <0 0x06400000 0 0x600000>;
+			no-map;
+		};
+
+		memory_hole2: hole2@6c00000 {
+			reg = <0 0x06c00000 0 0x2400000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@9000000 {
+			reg = <0 0x09000000 0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: tzapp@ea00000 {
+			reg = <0 0x0ea00000 0 0x1900000>;
+			no-map;
+		};
+
+		mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
+			reg = <0 0xca0b0000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@ca100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xca100000 0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		qseecom_mem: qseecom@cb400000 {
+			reg = <0 0xcb400000 0 0x1c00000>;
+			no-mem;
+		};
+
+		adsp_rfsa_mem: adsp-rfsa@cd000000 {
+			reg = <0 0xcd000000 0 0x10000>;
+			no-map;
+		};
+
+		sensor_rfsa_mem: sensor-rfsa@cd010000 {
+			reg = <0 0xcd010000 0 0x10000>;
+			no-map;
+		};
+
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0 0xdfc00000 0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	/* Atmel or Synaptics touchscreen */
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	/* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	/*
+	 * NXP NCI NFC,
+	 * TI USB320 Type-C controller,
+	 * Pericom 30216a USB (de)mux switch
+	 */
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	/* cm36686 proximity and ambient light sensor */
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+
+	/* Silabs si4705 FM transmitter */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&pm8994_spmi_regulators {
+	VDD_APC0: s8 {
+		regulator-min-microvolt = <680000>;
+		regulator-max-microvolt = <1180000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */
+	VDD_APC1: s11 {
+		regulator-min-microvolt = <700000>;
+		regulator-max-microvolt = <1225000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s7>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vph_pwr>;
+		vdd_l20_21-supply = <&vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/* S8, S9, S10 and S11 - SPMI-managed VDD_APC */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_lvs1: lvs1 {};
+		pm8994_lvs2: lvs2 {};
+	};
+
+	pmi8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
new file mode 100644
index 000000000..02fc3795d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ */
+
+#include "msm8994.dtsi"
+
+/* 8992 only features 2 A57 cores. */
+/delete-node/ &CPU6;
+/delete-node/ &CPU7;
+/delete-node/ &cpu6_map;
+/delete-node/ &cpu7_map;
+
+&gcc {
+	compatible = "qcom,gcc-msm8992";
+};
+
+&mmcc {
+	compatible = "qcom,mmcc-msm8992";
+
+	assigned-clock-rates = <800000000>,
+			       <808000000>,
+			       <1020000000>,
+			       <960000000>,
+			       <800000000>;
+};
+
+&ocmem {
+	reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>;
+
+	gmu-sram@0 {
+		reg = <0x0 0x80000>;
+	};
+};
+
+&rpmcc {
+	compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
+};
+
+&timer {
+	interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&tlmm {
+	compatible = "qcom,msm8992-pinctrl";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
new file mode 100644
index 000000000..29e79ae08
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, Huawei Inc. All rights reserved.
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2023, Petr Vorel <petr.vorel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+
+/ {
+	model = "Huawei Nexus 6P";
+	compatible = "huawei,angler", "qcom,msm8994";
+	chassis-type = "handset";
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <207 0x20000>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
+	qcom,board-id = <8026 0>;
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x1000000>;
+			no-map;
+		};
+
+		tzapp_mem: tzapp@4800000 {
+			reg = <0 0x04800000 0 0x1900000>;
+			no-map;
+		};
+
+		reserved@6300000 {
+			reg = <0 0x06300000 0 0x700000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp1_uart2_default>;
+	pinctrl-1 = <&blsp1_uart2_sleep>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <85 4>;
+};
+
+&sdhc1 {
+	status = "okay";
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts
new file mode 100644
index 000000000..c59341820
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+/dts-v1/;
+
+#include "msm8994.dtsi"
+#include "msm8994-msft-lumia-octagon.dtsi"
+
+/ {
+	model = "Microsoft Lumia 950 XL";
+	compatible = "microsoft,cityman", "qcom,msm8994";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
new file mode 100644
index 000000000..2861bcdf8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common Board Device Tree for
+ * Microsoft Mobile MSM8994 Octagon Platforms
+ *
+ * Copyright (c) 2020, Konrad Dybcio
+ * Copyright (c) 2020, Gustave Monce <gustave.monce@outlook.com>
+ */
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete all generic (msm8994.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &audio_mem;
+/delete-node/ &cont_splash_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &peripheral_region;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &smem_mem;
+
+/ {
+	/*
+	 * Most Lumia 950/XL users use GRUB to load their kernels,
+	 * hence there is no need for msm-id and friends.
+	 */
+
+	/*
+	 * This enables graphical output via bootloader-enabled display.
+	 * acpi=no is required due to WP platforms having ACPI support, but
+	 * only for Windows-based OSes.
+	 */
+	chosen {
+		bootargs = "earlycon=efifb console=efifb acpi=no";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	clocks {
+		divclk4: divclk4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		volup-key {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		camsnap-key {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		camfocus-key {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_front_default &hall_back_default>;
+
+		label = "GPIO Hall Effect Sensor";
+
+		event-hall-front-sensor {
+			label = "Hall Effect Front Sensor";
+			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+		};
+
+		event-hall-back-sensor {
+			label = "Hall Effect Back Sensor";
+			gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
+	};
+
+	reserved-memory {
+		/*
+		 * This device being a WP platform has a very different
+		 * memory layout than other Android based devices.
+		 * This memory layout is directly copied from the original
+		 * device UEFI firmware, and adapted based on observations
+		 * using JTAG for the Qualcomm Peripheral Image regions.
+		 */
+
+		uefi_mem: memory@200000 {
+			reg = <0 0x00200000 0 0x100000>;
+			no-map;
+		};
+
+		mppark_mem: memory@300000 {
+			reg = <0 0x00300000 0 0x80000>;
+			no-map;
+		};
+
+		fbpt_mem: memory@380000 {
+			reg = <0 0x00380000 0 0x1000>;
+			no-map;
+		};
+
+		dbg2_mem: memory@381000 {
+			reg = <0 0x00381000 0 0x4000>;
+			no-map;
+		};
+
+		capsule_mem: memory@385000 {
+			reg = <0 0x00385000 0 0x1000>;
+			no-map;
+		};
+
+		tpmctrl_mem: memory@386000 {
+			reg = <0 0x00386000 0 0x3000>;
+			no-map;
+		};
+
+		uefiinfo_mem: memory@389000 {
+			reg = <0 0x00389000 0 0x1000>;
+			no-map;
+		};
+
+		reset_mem: memory@389000 {
+			reg = <0 0x00389000 0 0x1000>;
+			no-map;
+		};
+
+		resuncached_mem: memory@38e000 {
+			reg = <0 0x0038e000 0 0x72000>;
+			no-map;
+		};
+
+		disp_mem: memory@400000 {
+			reg = <0 0x00400000 0 0x800000>;
+			no-map;
+		};
+
+		uefistack_mem: memory@c00000 {
+			reg = <0 0x00c00000 0 0x40000>;
+			no-map;
+		};
+
+		cpuvect_mem: memory@c40000 {
+			reg = <0 0x00c40000 0 0x10000>;
+			no-map;
+		};
+
+		rescached_mem: memory@400000 {
+			reg = <0 0x00c50000 0 0xb0000>;
+			no-map;
+		};
+
+		tzapps_mem: memory@6500000 {
+			reg = <0 0x06500000 0 0x500000>;
+			no-map;
+		};
+
+		smem_mem: memory@6a00000 {
+			reg = <0 0x06a00000 0 0x200000>;
+			no-map;
+		};
+
+		hyp_mem: memory@6c00000 {
+			reg = <0 0x06c00000 0 0x100000>;
+			no-map;
+		};
+
+		tz_mem: memory@6d00000 {
+			reg = <0 0x06d00000 0 0x160000>;
+			no-map;
+		};
+
+		rfsa_adsp_mem: memory@6e60000 {
+			reg = <0 0x06e60000 0 0x10000>;
+			no-map;
+		};
+
+		rfsa_mpss_mem: memory@6e70000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0x06e70000 0 0x10000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		/*
+		 * Value obtained from the device original ACPI DSDT table
+		 * MPSS_EFS / SBL
+		 */
+		mba_mem: memory@6e80000 {
+			reg = <0 0x06e80000 0 0x180000>;
+			no-map;
+		};
+
+		/*
+		 * Peripheral Image loader region begin!
+		 * The region reserved for pil is 0x7000000-0xef00000
+		 */
+
+		mpss_mem: memory@7000000 {
+			reg = <0 0x07000000 0 0x5a00000>;
+			no-map;
+		};
+
+		adsp_mem: memory@ca00000 {
+			reg = <0 0x0ca00000 0 0x1800000>;
+			no-map;
+		};
+
+		venus_mem: memory@e200000 {
+			reg = <0 0x0e200000 0 0x500000>;
+			no-map;
+		};
+
+		pil_metadata_mem: memory@e700000 {
+			reg = <0 0x0e700000 0 0x4000>;
+			no-map;
+		};
+
+		memory@e704000 {
+			reg = <0 0x0e704000 0 0x7fc000>;
+			no-map;
+		};
+		/* Peripheral Image loader region end */
+
+		cnss_mem: memory@ef00000 {
+			reg = <0 0x0ef00000 0 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	rmi4-i2c-dev@4b {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x4b>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			syna,clip-x-low = <0>;
+			syna,clip-x-high = <1440>;
+			syna,clip-y-low = <0>;
+			syna,clip-y-high = <2560>;
+		};
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	/*
+	 * This device uses the Texas Instruments TAS2553, however the TAS2552 driver
+	 * seems to work here. In the future a proper driver might need to
+	 * be written for this device.
+	 */
+	tas2553: tas2553@40 {
+		compatible = "ti,tas2552";
+		reg = <0x40>;
+
+		vbat-supply = <&vph_pwr>;
+		iovdd-supply = <&vreg_s4a_1p8>;
+		avdd-supply = <&vreg_s4a_1p8>;
+
+		enable-gpio = <&pm8994_gpios 12 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	ak09912: magnetometer@c {
+		compatible = "asahi-kasei,ak09912";
+		reg = <0xc>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&vreg_l18a_2p85>;
+		vid-supply = <&vreg_lvs2a_1p8>;
+	};
+
+	zpa2326: barometer@5c {
+		compatible = "murata,zpa2326";
+		reg = <0x5c>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <74 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&vreg_lvs2a_1p8>;
+	};
+
+	mpu6050: accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <64 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&vreg_lvs2a_1p8>;
+		vddio-supply = <&vreg_lvs2a_1p8>;
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	pn547: pn547@28 {
+		compatible = "nxp,pn544-i2c";
+
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	sideinteraction: ad7147_captouch@2c {
+		compatible = "ad,ad7147_captouch";
+		reg = <0x2c>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&grip_default>;
+		pinctrl-1 = <&grip_sleep>;
+
+		interrupts = <&tlmm 96 IRQ_TYPE_EDGE_FALLING>;
+
+		button_num = <8>;
+		touchpad_num = <0>;
+		wheel_num = <0>;
+		slider_num = <0>;
+
+		vcc-supply = <&vreg_l18a_2p85>;
+	};
+
+	/*
+	 * The QPDS-T900/QPDS-T930 is a customized part built for Nokia
+	 * by Avago. It is very similar to the Avago APDS-9930 with some
+	 * minor differences. In the future a proper driver might need to
+	 * be written for this device. For now this works fine.
+	 */
+	qpdst900: qpdst900@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+
+	fm_radio: si4705@11 {
+		compatible = "silabs,si470x";
+		reg = <0x11>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 93 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_lpddr_1p1: fan53526a@6c {
+		compatible = "fcs,fan53526";
+		reg = <0x6c>;
+
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vph_pwr>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on; /* Turning off DDR power doesn't sound good. */
+	};
+
+	/* ANX7816 HDMI bridge (needs MDSS HDMI) */
+};
+
+&blsp2_spi4 {
+	status = "okay";
+
+	/*
+	 * This device is a Lattice UC120 USB-C PD PHY.
+	 * It is actually a Lattice iCE40 FPGA pre-programmed by
+	 * the device firmware with a specific bitstream
+	 * enabling USB Type C PHY functionality.
+	 * Communication is done via a proprietary protocol over SPI.
+	 *
+	 * TODO: Once a proper driver is available, replace this.
+	 */
+	uc120: ice5lp2k@0 {
+		compatible = "lattice,ice40-fpga-mgr";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		cdone-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pmi8994_gpios 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+
+	qca6174_bt: bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&pm8994_gpios {
+	bt_en_gpios: bt-en-gpios-state {
+		pinconf {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <PM8994_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			bias-pull-down;
+		};
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pinconf {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+			power-source = <PM8994_GPIO_S4>;
+			bias-disable;
+		};
+	};
+};
+
+&pm8994_pon {
+	pwrkey {
+		compatible = "qcom,pm8941-pwrkey";
+		interrupts = <0 8 0 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		linux,code = <KEY_POWER>;
+	};
+
+	resin {
+		compatible = "qcom,pm8941-resin";
+		interrupts = <0 8 1 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&pmi8994_gpios {
+	pinctrl-0 = <&hd3ss460_pol &hd3ss460_amsel &hd3ss460_en>;
+	pinctrl-names = "default";
+
+	/*
+	 * This device uses a TI HD3SS460 Type-C MUX
+	 * As this device has no driver currently,
+	 * the configuration for USB Face Up is set-up here.
+	 *
+	 * TODO: remove once a driver is available
+	 * TODO: add VBUS GPIO 5
+	 */
+	hd3ss460_pol: pol-low-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		qcom,drive-strength = <3>;
+		bias-pull-down;
+	};
+
+	hd3ss460_amsel: amsel-high-state {
+		pins = "gpio9";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		qcom,drive-strength = <1>;
+		bias-pull-up;
+	};
+
+	hd3ss460_en: en-high-state {
+		pins = "gpio10";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		qcom,drive-strength = <1>;
+		bias-pull-up;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+	};
+};
+
+&rpm_requests {
+	/* These values were taken from the original firmware ACPI tables */
+	pm8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p0>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s5a_2p15>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		vreg_s3a_1p3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-allow-set-load;
+			regulator-system-load = <300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		vreg_s5a_2p15: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		vreg_s7a_1p0: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/*
+		 * S8 - SPMI-managed VDD_APC0
+		 * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+		 */
+
+		vreg_l1a_1p0: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l2a_1p25: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-allow-set-load;
+			regulator-system-load = <4160>;
+		};
+
+		vreg_l3a_1p2: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l4a_1p225: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <1000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l11a_1p2: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <35000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <50000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <22000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <52000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		vreg_l17a_2p7: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <300000>;
+		};
+
+		vreg_l18a_2p85: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <600000>;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <500000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l22a_3p0: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <150000>;
+		};
+
+		vreg_l23a_2p8: l23 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-allow-set-load;
+			regulator-system-load = <5800>;
+		};
+
+		vreg_l25a_1p1: l25 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l26a_1p0: l26 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l27a_1p05: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <500000>;
+		};
+
+		vreg_l28a_1p0: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <26000>;
+		};
+
+		vreg_l29a_2p8: l29 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <80000>;
+		};
+
+		vreg_l30a_1p8: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <2500>;
+		};
+
+		vreg_l31a_1p2: l31 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-allow-set-load;
+			regulator-system-load = <600000>;
+		};
+
+		vreg_l32a_1p8: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	pmi8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vreg_s1b_1p0: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	/*
+	 * This device is shipped with HS400 capabable eMMCs
+	 * However various brands have been used in various product batches,
+	 * including a Samsung eMMC (BGND3R) which features a quirk with HS400.
+	 * Set the speed to HS200 as a safety measure.
+	 */
+	mmc-hs200-1_8v;
+};
+
+&sdhc2 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
+};
+
+&tlmm {
+	grip_default: grip-default-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-down;
+	};
+
+	grip_sleep: grip-sleep-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	hall_front_default: hall-front-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hall_back_default: hall-back-default-state {
+		pins = "gpio75";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
new file mode 100644
index 000000000..99388b019
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z3+/Z4";
+	compatible = "sony,ivy-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+&pm8994_l3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1000000>;
+};
+
+&pm8994_l17 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+/delete-node/ &pm8994_l19;
+/delete-node/ &pm8994_l32;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
new file mode 100644
index 000000000..71758d2cf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z4 Tablet (LTE)";
+	compatible = "sony,karin-row", "qcom,msm8994";
+	chassis-type = "tablet";
+};
+
+&blsp2_i2c5 {
+	/*
+	 * TI LP8557 backlight driver @ 2c
+	 * AD AD7146 touch controller @ 2f
+	 * sii8620 HDMI/MHL bridge @ 72 (kitakami-common)
+	 */
+};
+
+&pm8994_l3 {
+	regulator-min-microvolt = <1050000>;
+	regulator-max-microvolt = <1050000>;
+};
+
+&pm8994_l17 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l22 {
+	regulator-min-microvolt = <3100000>;
+	regulator-max-microvolt = <3100000>;
+};
+
+&pm8994_l25 {
+	regulator-min-microvolt = <1037500>;
+	regulator-max-microvolt = <1037500>;
+};
+
+/delete-node/ &pm8994_l32;
+/* Z4 tablets use a different touchscreen. */
+/delete-node/ &touchscreen;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
new file mode 100644
index 000000000..69b7df0ed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5 Premium";
+	compatible = "sony,satsuki-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+&pm8994_l14 {
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <1850000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 000000000..466508cd8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5";
+	compatible = "sony,sumire-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
new file mode 100644
index 000000000..76bf50191
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5 Compact";
+	compatible = "sony,suzuran-row", "qcom,msm8994";
+	chassis-type = "handset";
+};
+
+&pm8994_l14 {
+	regulator-min-microvolt = <2000000>;
+	regulator-max-microvolt = <2000000>;
+};
+
+/delete-node/ &pm8994_l19;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 000000000..9dbde79f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+
+	/*
+	 * We support MSM8994 v2 (0x20000) and v2.1 (0x20001).
+	 * The V1 chip (0x0 and 0x10000) is significantly different
+	 * and requires driver-side changes (including CPR, be warned!!).
+	 * Besides that, it's very rare.
+	 */
+	qcom,msm-id = <207 0x20000>, <207 0x20001>;
+	/* We only use pm8994+pmi8994. */
+	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	/* This property is shared across all kitakami devices. */
+	qcom,board-id = <8 0>;
+
+	/* Kitakami firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-0 {
+			label = "Volume Down";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-1 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-2 {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-3 {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@1fe00000 {
+			compatible = "ramoops";
+			reg = <0 0x1fe00000 0 0x200000>;
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+
+		fb_region: fb_region@40000000 {
+			reg = <0 0x40000000 0 0x1000000>;
+			no-map;
+		};
+
+		tzapp: memory@c7800000 {
+			reg = <0 0xc7800000 0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp1_spi1 {
+	status = "okay";
+
+	/* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp1_i2c2 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* NXP PN547 NFC */
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	touchscreen: rmi4-i2c-dev@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		vdd-supply = <&pm8994_l22>;
+		vio-supply = <&pm8994_s4>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	/* sii8620 HDMI/MHL bridge */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+/*
+ * Kitakami bootloader only turns cont_splash on when it detects
+ * specific downstream MDSS/backlight nodes in the active DTB.
+ * One way to use that framebuffer is to load a secondary instance of
+ * LK with the downstream DTB appended and then, only from there, load
+ * mainline Linux.
+ */
+&cont_splash_mem {
+	reg = <0 0x03401000 0 0x2200000>;
+};
+
+&pmi8994_spmi_regulators {
+	/*
+	 * Yeah, this one *is* managed by RPMPD, but also needs
+	 * to be hacked up as a-o due to the GPU device only accepting a single
+	 * power domain.. which still isn't enough and forces us to bind
+	 * OXILI_CX and OXILI_GX together!
+	 */
+	vdd_gfx: s2 {
+		regulator-name = "VDD_GFX";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <980000>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&rpm_requests {
+	/* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
+	pmi8994_regulators: regulators-0 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		pmi8994_s1: s1 {
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		/* S2 & S3 - VDD_GFX */
+
+		pmi8994_bby: boost-bypass {
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+
+	pm8994_regulators: regulators-1 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pmi8994_s1>;
+		vdd_l2_l26_l28-supply = <&pm8994_s3>;
+		vdd_l3_l11-supply = <&pm8994_s3>;
+		vdd_l4_l27_l31-supply = <&pm8994_s3>;
+		vdd_l6_l12_l32-supply = <&pm8994_s5>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
+		vdd_l13_l19_l23_l24-supply = <&pmi8994_bby>;
+		vdd_l14_l15-supply = <&pm8994_s5>;
+		vdd_l17_l29-supply = <&pmi8994_bby>;
+		vdd_l20_l21-supply = <&pmi8994_bby>;
+		vdd_l25-supply = <&pm8994_s3>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		/* S1, S2, S6 and S12 are managed by RPMPD */
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		/*
+		 * S8 - SPMI-managed VDD_APC0
+		 * S9, S10 and S11 (the main one) - SPMI-managed VDD_APC1
+		 */
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L5 is inaccessible from RPM */
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		/* L7 is inaccessible from RPM */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_lvs1: lvs1 {
+			regulator-boot-on;
+		};
+		pm8994_lvs2: lvs2 {
+			regulator-boot-on;
+		};
+	};
+};
+
+&sdhc1 {
+	/*
+	 * There is an issue with the eMMC causing permanent
+	 * damage to the card if a quirk isn't addressed.
+	 * Until it's fixed, disable the MMC so as not to brick
+	 * devices.
+	 */
+	status = "disabled";
+
+	/*
+	 * Downstream pushes 2.95V to the sdhci device,
+	 * but upstream driver REALLY wants to make vmmc 1.8v
+	 * cause of the hs400-1_8v mode. MMC works fine without
+	 * that regulator, so let's not use it for now.
+	 * vqmmc is also disabled cause driver stll complains.
+	 *
+	 * vmmc-supply = <&pm8994_l20>;
+	 * vqmmc-supply = <&pm8994_s4>;
+	 */
+};
+
+&sdhc2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+};
+
+&tlmm {
+	ts_int_active: ts-int-active-state {
+		pins = "gpio42";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio109";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
new file mode 100644
index 000000000..c32625715
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -0,0 +1,1112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8994.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc1;
+		mmc2 = &sdhc2;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				cpu6_map: core2 {
+					cpu = <&CPU6>;
+				};
+
+				cpu7_map: core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8994-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8994-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0 0x03400000 0 0x1000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@3401000 {
+			reg = <0 0x03401000 0 0x2200000>;
+			no-map;
+		};
+
+		smem_mem: smem_region@6a00000 {
+			reg = <0 0x06a00000 0 0x200000>;
+			no-map;
+		};
+
+		mpss_mem: memory@7000000 {
+			reg = <0 0x07000000 0 0x5a00000>;
+			no-map;
+		};
+
+		peripheral_region: memory@ca00000 {
+			reg = <0 0x0ca00000 0 0x1f00000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@c6400000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xc6400000 0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		mba_mem: memory@c6700000 {
+			reg = <0 0xc6700000 0 0x100000>;
+			no-map;
+		};
+
+		audio_mem: memory@c7000000 {
+			reg = <0 0xc7000000 0 0x800000>;
+			no-map;
+		};
+
+		adsp_mem: memory@c9400000 {
+			reg = <0 0xc9400000 0 0x3f00000>;
+			no-map;
+		};
+
+		reserved@6c00000 {
+			reg = <0 0x06c00000 0 0x400000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@f9017000 {
+			compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt";
+			reg = <0xf9017000 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sleep_clk>;
+			timeout-sec = <10>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		usb3: usb@f92f8800 {
+			compatible = "qcom,msm8994-dwc3", "qcom,dwc3";
+			reg = <0xf92f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+
+			usb@f9200000 {
+				compatible = "snps,dwc3";
+				reg = <0xf9200000 0xcc00>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		sdhc1: mmc@f9824900 {
+			compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc2: mmc@f98a4900 {
+			compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+			cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@f9904000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9904000 0x19000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <24>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart2: serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@f9923000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@f9923000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi1_default>;
+			pinctrl-1 = <&blsp1_spi1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C3 doesn't exist */
+
+		blsp1_i2c4: i2c@f9926000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9926000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c5: i2c@f9927000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9927000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <24>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+					<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@f9963000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9963000 0x500>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi4: spi@f9966000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0xf9966000 0x500>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 18>, <&blsp2_dma 19>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_spi10_default>;
+			pinctrl-1 = <&blsp2_spi10_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <355000>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c11_default>;
+			pinctrl-1 = <&i2c11_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
+
+			clock-names = "xo", "sleep";
+			clocks = <&xo_board>, <&sleep_clk>;
+		};
+
+		rpm_msg_ram: sram@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		spmi_bus: spmi@fc4cf000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "blsp_uart8";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_default: i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_default: i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_default: i2c4-default-state {
+				pins = "gpio19", "gpio20";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep-state {
+				pins = "gpio19", "gpio20";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			i2c5_default: i2c5-default-state {
+				pins = "gpio23", "gpio24";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep-state {
+				pins = "gpio23", "gpio24";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default-state {
+				pins = "gpio28", "gpio27";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep-state {
+				pins = "gpio28", "gpio27";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_default: i2c7-default-state {
+				pins = "gpio44", "gpio43";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep-state {
+				pins = "gpio44", "gpio43";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_spi10_default: blsp2-spi10-default-state {
+				default-pins {
+					pins = "gpio53", "gpio54", "gpio55";
+					function = "blsp_spi10";
+					drive-strength = <10>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio67";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi10_sleep: blsp2-spi10-sleep-state {
+				pins = "gpio53", "gpio54", "gpio55";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c11_default: i2c11-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c11_sleep: i2c11-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				default-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <10>;
+					bias-pull-down;
+				};
+
+				cs-pins {
+					pins = "gpio8";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_clk_on: clk-on-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: clk-off-state {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on-state {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_cmd_off: cmd-off-state {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_data_off: data-off-state {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off-state {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc2_clk_on: sdc2-clk-on-state {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <10>;
+			};
+
+			sdc2_clk_off: sdc2-clk-off-state {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc2_cmd_on: sdc2-cmd-on-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_cmd_off: sdc2-cmd-off-state {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_data_on: sdc2-data-on-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_data_off: sdc2-data-off-state {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8994";
+			reg = <0xfd8c0000 0x5200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clock-names = "xo",
+				      "gpll0",
+				      "mmssnoc_ahb",
+				      "oxili_gfx3d_clk_src",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll";
+			clocks = <&xo_board>,
+				 <&gcc GPLL0_OUT_MMSSCC>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>,
+				 <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			assigned-clocks = <&mmcc MMPLL0_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <800000000>,
+					       <1167000000>,
+					       <1020000000>,
+					       <960000000>,
+					       <600000000>;
+		};
+
+		ocmem: sram@fdd00000 {
+			compatible = "qcom,msm8974-ocmem";
+			reg = <0xfdd00000 0x2000>,
+			      <0xfec00000 0x200000>;
+			reg-names = "ctrl", "mem";
+			ranges = <0 0xfec00000 0x200000>;
+			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+				 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+			clock-names = "core", "iface";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gmu_sram: gmu-sram@0 {
+				reg = <0x0 0x180000>;
+			};
+		};
+	};
+
+	timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 0xff08>,
+			     <GIC_PPI 3 0xff08>,
+			     <GIC_PPI 4 0xff08>,
+			     <GIC_PPI 1 0xff08>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
new file mode 100644
index 000000000..6e9c9caf2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
+	compatible = "qcom,msm8996-mtp", "qcom,msm8996";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp2_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&mdss_hdmi {
+	status = "okay";
+};
+
+&mdss_hdmi_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
new file mode 100644
index 000000000..ec5457508
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -0,0 +1,801 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		constant-charge-current-max-microamp = <3000000>;
+		voltage-min-design-microvolt = <3400000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		div1_mclk: div1-clk {
+			compatible = "gpio-gate-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk>;
+			#clock-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		divclk4: div4-clk {
+			compatible = "fixed-clock";
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+		};
+	};
+
+	reserved-memory {
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0 0xac000000 0 0x200000>;
+			record-size = <0x20000>;
+			console-size = <0x100000>;
+			pmsg-size = <0x80000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: wlan-en-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	tfa9890_amp: audio-codec@36 {
+		compatible = "nxp,tfa9890";
+		reg = <0x36>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	bq27541: fuel-gauge@55 {
+		compatible = "ti,bq27541";
+		reg = <0x55>;
+	};
+};
+
+&blsp1_uart2 {
+	label = "BT-UART";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_gpios>;
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+
+	synaptics_rmi4_i2c: touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touch_default>;
+		pinctrl-1 = <&touch_suspend>;
+		vdd-supply = <&vreg_l22a_3p0>;
+		vio-supply = <&vreg_s4a_1p8>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_2pins_default>;
+	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+	status = "okay";
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&hsusb_phy2 {
+	vdd-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l22a_3p0>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	status = "okay";
+};
+
+&pm8994_gpios {
+	bt_en_gpios: bt-en-gpios-state {
+		pins = "gpio19";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	wlan_en_gpios: wlan-en-gpios-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	audio_mclk: divclk1-state {
+		pins = "gpio15";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		power-source = <PM8994_GPIO_S4>;
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pins = "gpio18";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+
+	s9 {
+		qcom,saw-slave;
+	};
+
+	s10 {
+		qcom,saw-slave;
+	};
+
+	s11 {
+		qcom,saw-leader;
+		regulator-min-microvolt = <1140000>;
+		regulator-max-microvolt = <1140000>;
+		regulator-max-step-microvolt = <150000>;
+		regulator-always-on;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-name = "vdd-gfx";
+		regulator-min-microvolt = <980000>;
+		regulator-max-microvolt = <1230000>;
+	};
+};
+
+&q6asmdai {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		vreg_s7a_0p8: s7 {
+			regulator-name = "vreg_s7a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p1: l3 {
+			regulator-name = "vreg_l3a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		vreg_l6a_1p2: l6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l11a_1p15: l11 {
+			regulator-name = "vreg_l11a_1p15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		vreg_l17a_2p6: l17 {
+			regulator-name = "vreg_l17a_2p6";
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2600000>;
+		};
+
+		vreg_l18a_3p3: l18 {
+			regulator-name = "vreg_l18a_3p3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-name = "vreg_l19a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+		};
+
+		vreg_l27a_1p2: l27 {
+			regulator-name = "vreg_l27a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&div1_mclk>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "OnePlus3";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"MIC BIAS2", "Headset Mic",
+			"AMIC4", "MIC BIAS1",
+			"MIC BIAS1", "Primary Mic",
+			"AMIC5", "MIC BIAS3",
+			"MIC BIAS3", "Noise Mic";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	mm7-dai-link {
+		link-name = "MultiMedia7";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
+		};
+	};
+
+	mm8-dai-link {
+		link-name = "MultiMedia8";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
+		};
+	};
+
+	mm9-dai-link {
+		link-name = "MultiMedia9";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>;
+		};
+	};
+
+	mm10-dai-link {
+		link-name = "MultiMedia10";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>;
+		};
+	};
+
+	mm11-dai-link {
+		link-name = "MultiMedia11";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>;
+		};
+	};
+
+	mm12-dai-link {
+		link-name = "MultiMedia12";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>;
+		};
+	};
+
+	mm13-dai-link {
+		link-name = "MultiMedia13";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>;
+		};
+	};
+
+	mm14-dai-link {
+		link-name = "MultiMedia14";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>;
+		};
+	};
+
+	mm15-dai-link {
+		link-name = "MultiMedia15";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>;
+		};
+	};
+
+	mm16-dai-link {
+		link-name = "MultiMedia16";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+
+	speaker-dai-link {
+		link-name = "Speaker";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		codec {
+			sound-dai = <&tfa9890_amp>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <81 4>;
+
+	mdss_dsi_active: mdss-dsi-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend: mdss-dsi-suspend-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	touch_default: touch-default-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touch_suspend: touch-suspend-state {
+		pins = "gpio89", "gpio125", "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+
+	maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
new file mode 100644
index 000000000..dfe75119b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3";
+	compatible = "oneplus,oneplus3", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15801 15>, <8 0 15801 16>;
+	qcom,msm-id = <246 0x30001>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+	status = "okay";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3000000>;
+	voltage-max-design-microvolt = <4350000>;
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
+			"qcom/msm8996/oneplus3/modem.mbn";
+	status = "okay";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
new file mode 100644
index 000000000..51fce65e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Harry Austen <hpausten@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 3T";
+	compatible = "oneplus,oneplus3t", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,board-id = <8 0 15811 26>,
+			<8 0 15811 27>,
+			<8 0 15811 28>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+	status = "okay";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3400000>;
+	voltage-max-design-microvolt = <4400000>;
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
+			"qcom/msm8996/oneplus3t/modem.mbn";
+	status = "okay";
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
new file mode 100644
index 000000000..6374c5f53
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+	model = "Sony Xperia X Performance";
+	compatible = "sony,dora-row", "qcom,msm8996";
+	chassis-type = "handset";
+};
+
+/delete-node/ &tof_sensor;
+/delete-node/ &pm8994_l11;
+/delete-node/ &pm8994_l14;
+
+&usb_detect {
+	pins = "gpio24";
+};
+
+&usb3_id {
+	id-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts
new file mode 100644
index 000000000..d3100ddf9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+	model = "Sony Xperia XZ";
+	compatible = "sony,kagura-row", "qcom,msm8996";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts
new file mode 100644
index 000000000..3e5bdaba8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8996-sony-xperia-tone.dtsi"
+
+/ {
+	model = "Sony Xperia XZs";
+	compatible = "sony,keyaki-row", "qcom,msm8996";
+	chassis-type = "handset";
+};
+
+&pm8994_l19 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&pm8994_l30 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-pull-down;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
new file mode 100644
index 000000000..d55e40750
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &gpu_mem;
+
+/ {
+	qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
+	qcom,board-id = <8 0>;
+
+	chosen {
+		bootargs = "maxcpus=2";
+	};
+
+	reserved-memory {
+		ramoops@a7f00000 {
+			compatible = "ramoops";
+			reg = <0 0xa7f00000 0 0x100000>;
+			record-size = <0x20000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+
+		adsp_mem: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@90400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x90400000 0x0 0x2000>;
+			no-map;
+		};
+
+		slpi_mem: memory@90500000 {
+			reg = <0 0x90500000 0 0xa00000>;
+			no-map;
+		};
+
+		venus_mem: memory@90f00000 {
+			reg = <0 0x90f00000 0 0x500000>;
+			no-map;
+		};
+	};
+
+	panel_tvdd: tvdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel_tvdd";
+		gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&tp_vddio_en>;
+		pinctrl-names = "default";
+	};
+
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_detect>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl_reg_on>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c3 {
+	clock-frequency = <355000>;
+	status = "okay";
+
+	tof_sensor: vl53l0x@29 {
+		compatible = "st,vl53l0x";
+		reg = <0x29>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_i2c5 {
+	clock-frequency = <355000>;
+	status = "okay";
+
+	/* FUSB301 USB-C controller */
+};
+
+&blsp2_i2c6 {
+	clock-frequency = <355000>;
+	status = "okay";
+
+	synaptics@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&panel_tvdd>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <220>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&camera0_mclk {
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera0_pwdn {
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera0_rst {
+	pins = "gpio30";
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera2_mclk {
+	drive-strength = <2>;
+	output-low;
+};
+
+&camera2_rst {
+	drive-strength = <2>;
+	output-low;
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+	vdda-phy-dpdm-supply = <&pm8994_l24>;
+	status = "okay";
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&pm8994_l28>;
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&pm8994_l28>;
+	vdda-pll-supply = <&pm8994_l12>;
+	status = "okay";
+};
+
+&pm8994_gpios {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8994_gpios_defaults>;
+	gpio-line-names =
+		"NC",
+		"VOL_DOWN_N",
+		"VOL_UP_N",
+		"SNAPSHOT_N",
+		"FOCUS_N",
+		"NC",
+		"NFC_VEN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"EAR_EN",
+		"NC",
+		"PM_DIVCLK1",
+		"PMI_CLK",
+		"NC",
+		"WL_SLEEP_CLK",
+		"NC",
+		"PMIC_SPON",
+		"UIM_BATT_ALARM",
+		"PMK_SLEEP_CLK";
+
+	/*
+	 * We don't yet know for sure which GPIOs are of our interest, but what
+	 * we do know is that if a vendor sets the pins to a non-default state, there's
+	 * probably a reason for it, and just to be on the safe side, we follow suit.
+	 */
+	pm8994_gpios_defaults: pm8994-gpios-default-state {
+		pm8994-gpio1-nc-pins {
+			pins = "gpio1";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+		};
+
+		vol-down-n-pins {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		vol-up-n-pins {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		camera-snapshot-n-pins {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		camera-focus-n-pins {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio6-nc-pins {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		nfc-download-pins {
+			pins = "gpio7";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio8-nc-pins {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm8994-gpio9-nc-pins {
+			pins = "gpio9";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-high;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		nfc-clock-pins {
+			pins = "gpio10";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			drive-push-pull;
+			bias-pull-down;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio11-nc-pins {
+			pins = "gpio11";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm8994-gpio12-nc-pins {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		ear-enable-pins {
+			pins = "gpio13";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-high;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio14-nc-pins {
+			pins = "gpio14";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm-divclk1-gpio-pins {
+			pins = "gpio15";
+			function = "func1";
+			output-high;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pmi-clk-gpio-pins {
+			pins = "gpio16";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+		};
+
+		pm8994-gpio17-nc-pins {
+			pins = "gpio17";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		rome-sleep-pins {
+			pins = "gpio18";
+			function = PMIC_GPIO_FUNC_FUNC2;
+			output-low;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pm8994-gpio19-nc-pins {
+			pins = "gpio19";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pm8994-gpio22-nc-pins {
+			pins = "gpio22";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+	};
+};
+
+&pm8994_mpps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pm8994_mpps_defaults>;
+
+	gpio-line-names =
+		"SDC_UIM_VBIAS",
+		"LCD_ID_ADC",
+		"VREF_DACX",
+		"NC",
+		"FLASH_THERM",
+		"NC",
+		"NC",
+		"RF_ID";
+
+	pm8994_mpps_defaults: pm8994-mpps-default-state {
+		lcd-id_adc-mpp-pins {
+			pins = "mpp2";
+			function = "analog";
+			input-enable;
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH6>;
+		};
+
+		pm-mpp4-nc-pins {
+			pins = "mpp4";
+			function = "digital";
+			bias-high-impedance;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		flash-therm-mpp-pins {
+			pins = "mpp5";
+			function = "analog";
+			input-enable;
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH5>;
+		};
+
+		mpp6-nc-pins {
+			pins = "mpp6";
+			function = "digital";
+			bias-high-impedance;
+		};
+
+		rf-id-mpp-pins {
+			pins = "mpp8";
+			function = "analog";
+			input-enable;
+			qcom,amux-route = <PMIC_MPP_AMUX_ROUTE_CH8>;
+		};
+	};
+};
+
+&pm8994_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&pmi8994_gpios {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmi8994_gpios_defaults>;
+
+	gpio-line-names =
+		"VIB_LDO_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB_SWITCH_SEL",
+		"NC";
+
+	pmi8994_gpios_defaults: pmi8994-gpios-default-state {
+		vib-ldo-en-gpio-pins {
+			pins = "gpio1";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-low;
+			bias-disable;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio2-nc-pins {
+			pins = "gpio2";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pmi-gpio3-nc-pins {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			input-enable;
+			bias-high-impedance;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_VPH>;
+		};
+
+		pmi-gpio4-nc-pins {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio5-nc-pins {
+			pins = "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio6-nc-pins {
+			pins = "gpio6";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio7-nc-pins {
+			pins = "gpio7";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		pmi-gpio8-nc-pins {
+			pins = "gpio8";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+			output-high;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+
+		usb-switch-sel-pins {
+			pins = "gpio9";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			drive-push-pull;
+		};
+
+		pmi-gpio10-nc-pins {
+			pins = "gpio10";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			drive-push-pull;
+			bias-disable;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			power-source = <PM8994_GPIO_S4>;
+		};
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+
+	pm8994_s9: s9 {
+		qcom,saw-slave;
+	};
+
+	pm8994_s10: s10 {
+		qcom,saw-slave;
+	};
+
+	pm8994_s11: s11 {
+		qcom,saw-leader;
+		regulator-name = "vdd_apcc";
+		regulator-always-on;
+		regulator-min-microvolt = <470000>;
+		regulator-max-microvolt = <1140000>;
+	};
+};
+
+&pmi8994_lpg {
+	qcom,power-source = <1>;
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx:
+	pmi8994_s2: s2 {
+		/* Pinned to a high value for now to avoid random crashes. */
+		regulator-min-microvolt = <1015000>;
+		regulator-max-microvolt = <1015000>;
+		regulator-name = "vdd_gfx";
+		regulator-always-on;
+	};
+};
+
+&pmi8994_wled {
+	default-brightness = <512>;
+	qcom,num-strings = <3>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8994_s3>;
+		vdd_l2_l26_l28-supply = <&pm8994_s3>;
+		vdd_l3_l11-supply = <&pm8994_s3>;
+		vdd_l4_l27_l31-supply = <&pm8994_s3>;
+		vdd_l5_l7-supply = <&pm8994_s5>;
+		vdd_l6_l12_l32-supply = <&pm8994_s5>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l14_l15-supply = <&pm8994_s5>;
+		vdd_l20_l21-supply = <&pm8994_s5>;
+		vdd_l25-supply = <&pm8994_s3>;
+		vdd_lvs1_2-supply = <&pm8994_s4>;
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <325000>;
+			regulator-always-on;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		/* L6 and L7 seem unused. */
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <22000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l30: l30 { };
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&sdhc1 {
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+	mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm8994_l21>;
+	vqmmc-supply = <&pm8994_l13>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+	pinctrl-0 = <&sw_service_gpio>;
+	pinctrl-names = "default";
+
+	disp_reset_n_gpio: disp-reset-n-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdp_vsync_p_gpio: mdp-vsync-p-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sw_service_gpio: sw-service-gpio-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_detect: usb-detect-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	uim_detect_en: uim-detect-en-state {
+		pins = "gpio29";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	tray_det_pin: tray-det-state {
+		pins = "gpio40";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tp_vddio_en: tp-vddio-en-state {
+		pins = "gpio50";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lcd_vddio_en: lcd-vddio-en-state {
+		pins = "gpio51";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	wl_host_wake: wl-host-wake-state {
+		pins = "gpio79";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wl_reg_on: wl-reg-on-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	ts_reset_n: ts-rst-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	touch_int_n: touch-int-n-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	touch_int_sleep: touch-int-sleep-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&usb3 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&usb3_id>;
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+	snps,hird-threshold = /bits/ 8 <0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi
new file mode 100644
index 000000000..929bdcd45
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-v3.0.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	qcom,msm-id = <246 0x30000>;
+};
+
+ /*
+  * This revision seems to have differ GPU CPR
+  * parameters, GPU frequencies and some differences
+  * when it comes to voltage delivery to.. once again
+  * the GPU. Funnily enough, it's simpler to make it an
+  * overlay on top of 3.1 (the final one) than vice versa.
+  * The differences will show here as more and more
+  * features get enabled upstream.
+  */
+
+gpu_opp_table_3_0: opp-table-gpu30 {
+	compatible = "operating-points-v2";
+
+	opp-624000000 {
+		opp-hz = /bits/ 64 <624000000>;
+		opp-level = <7>;
+	};
+
+	opp-560000000 {
+		opp-hz = /bits/ 64 <560000000>;
+		opp-level = <6>;
+	};
+
+	opp-510000000 {
+		opp-hz = /bits/ 64 <510000000>;
+		opp-level = <5>;
+	};
+
+	opp-401800000 {
+		opp-hz = /bits/ 64 <401800000>;
+		opp-level = <4>;
+	};
+
+	opp-315000000 {
+		opp-hz = /bits/ 64 <315000000>;
+		opp-level = <3>;
+	};
+
+	opp-214000000 {
+		opp-hz = /bits/ 64 <214000000>;
+		opp-level = <3>;
+	};
+
+	opp-133000000 {
+		opp-hz = /bits/ 64 <133000000>;
+		opp-level = <3>;
+	};
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table_3_0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
new file mode 100644
index 000000000..06f8ff624
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	divclk1_cdc: divclk1 {
+		compatible = "gpio-gate-clock";
+		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+		#clock-cells = <0>;
+		enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk1_default>;
+	};
+
+	divclk4: divclk4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk4";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk4_pin_a>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		key-dome {
+			label = "Home";
+			gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	irled {
+		compatible = "pwm-ir-tx";
+		pwms = <&pm8994_lpg 1 1000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&irled_default>;
+	};
+
+	reserved-memory {
+		memory@88800000 {
+			reg = <0x0 0x88800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		/* This platform has all PIL regions offset by 0x1400000 */
+		/delete-node/ mpss@88800000;
+		mpss_mem: mpss@89c00000 {
+			reg = <0x0 0x89c00000 0x0 0x6200000>;
+			no-map;
+		};
+
+		/delete-node/ adsp@8ea00000;
+		adsp_mem: adsp@8fe00000 {
+			reg = <0x0 0x8fe00000 0x0 0x1b00000>;
+			no-map;
+		};
+
+		/delete-node/ slpi@90500000;
+		slpi_mem: slpi@91900000 {
+			reg = <0x0 0x91900000 0x0 0xa00000>;
+			no-map;
+		};
+
+		/delete-node/ gpu@90f00000;
+		gpu_mem: gpu@92300000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x92300000 0x0 0x2000>;
+			no-map;
+		};
+
+		/delete-node/ venus@91000000;
+		venus_mem: venus@92400000 {
+			reg = <0x0 0x92400000 0x0 0x500000>;
+			no-map;
+		};
+
+		ramoops@92900000 {
+			compatible = "ramoops";
+			reg = <0x0 0x92900000 0x0 0x100000>;
+			no-map;
+
+			record-size = <0x8000>;
+			console-size = <0x80000>;
+			ftrace-size = <0x20000>;
+			pmsg-size = <0x40000>;
+		};
+
+		/delete-node/ rmtfs;
+		rmtfs@f6c00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6c00000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		/delete-node/ mba@91500000;
+		mba_mem: mba@f6f00000 {
+			reg = <0x0 0xf6f00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v2_tp: vdd-3v2-tp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v2_tp";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		startup-delay-us = <4000>;
+		vin-supply = <&vph_pwr>;
+
+		gpio = <&tlmm 73 0>;
+		enable-active-high;
+	};
+
+	vdd_3v3: rome-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <4000>;
+		vin-supply = <&vph_pwr_bbyp>;
+
+		gpio = <&pm8994_gpios 9 0>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rome_enable_default>;
+
+		/* Required by QCA6174a - vddpe-3v3 */
+		regulator-always-on;
+	};
+
+	/* WL_EN pin defined as a fixed regulator */
+	wlan_en: wlan-en-1-8v {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default>;
+	};
+};
+
+&adsp_pil {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	nfc: nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_default>;
+	};
+};
+
+&blsp2_i2c3 {
+	status = "okay";
+
+	typec: typec@47 {
+		compatible = "ti,tusb320l";
+		reg = <0x47>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <63 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&blsp2_i2c6 {
+	status = "okay";
+	/* MSM_TS */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+	label = "QCA_UART";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		clocks = <&divclk4>;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l2a_1p25>;
+	vddio-supply = <&vreg_l14a_1p8>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+	pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+};
+
+&mdss_dsi0_out {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+
+	vcca-supply = <&vreg_l28a_0p925>;
+};
+
+&mmcc {
+	vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+	status = "okay";
+
+	pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pcie0 {
+	status = "okay";
+
+	/* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */
+	vddpe-3v3-supply = <&wlan_en>;
+	vdda-supply = <&vreg_l28a_0p925>;
+
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pm8994_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+};
+
+&pmi8994_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&slim_msm {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		tasha_ifd: tas-ifd@0,0 {
+			compatible = "slim217,1a0";
+			reg = <0 0>;
+		};
+
+		wcd9335: codec@1,0 {
+			compatible = "slim217,1a0";
+			reg = <1 0>;
+
+			clock-names = "mclk", "slimbus";
+			clocks = <&divclk1_cdc>,
+				 <&rpmcc RPM_SMD_BB_CLK1>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+				     <53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "intr1", "intr2";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			slim-ifc-dev = <&tasha_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			vdd-buck-supply = <&vreg_s4a_1p8>;
+			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+			vdd-rx-supply = <&vreg_s4a_1p8>;
+			vdd-tx-supply = <&vreg_s4a_1p8>;
+			vdd-vbat-supply = <&vph_pwr>;
+			vdd-micbias-supply = <&vph_pwr_bbyp>;
+			vdd-io-supply = <&vreg_s4a_1p8>;
+		};
+	};
+};
+
+&slpi_pil {
+	status = "okay";
+
+	px-supply = <&vreg_lvs2a_1p8>;
+};
+
+&usb3 {
+	status = "okay";
+	extcon = <&typec>;
+
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb3_dwc3 {
+	extcon = <&typec>;
+
+	/* usb3-phy is not used on this device */
+	phys = <&hsusb_phy1>;
+	phy-names = "usb2-phy";
+
+	maximum-speed = "high-speed";
+	snps,is-utmi-l1-suspend;
+	snps,usb2-gadget-lpm-disable;
+	snps,hird-threshold = /bits/ 8 <0>;
+};
+
+&hsusb_phy1 {
+	status = "okay";
+	extcon = <&typec>;
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l25a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+
+	vcc-max-microamp = <600000>;
+	vccq-max-microamp = <450000>;
+	vccq2-max-microamp = <450000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l28a_0p925>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_l1-supply = <&vreg_s1b_1p025>;
+		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
+		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
+		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
+		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
+		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
+		vdd_l8_l16_l30-supply = <&vph_pwr>;
+		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
+		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
+		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
+		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
+		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
+		vdd_l25-supply = <&vreg_s3a_1p3>;
+		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p3: s3 {
+			regulator-name = "vreg_s3a_1p3";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+
+			/* Required by QCA6174a - vdd-core */
+			regulator-always-on;
+		};
+		vreg_s4a_1p8: s4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+
+			/* Required by QCA6174a - vddio */
+			regulator-always-on;
+		};
+		vreg_s5a_2p15: s5 {
+			regulator-name = "vreg_s5a_2p15";
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+		vreg_s7a_0p8: s7 {
+			regulator-name = "vreg_s7a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+		vreg_l1a_1p0: l1 {
+			regulator-name = "vreg_l1a_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+		vreg_l2a_1p25: l2 {
+			regulator-name = "vreg_l2a_1p25";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+		vreg_l4a_1p225: l4 {
+			regulator-name = "vreg_l4a_1p225";
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+		vreg_l6a_1p8: l6 {
+			regulator-name = "vreg_l6a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l8a_1p8: l8 {
+			regulator-name = "vreg_l8a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l9a_1p8: l9 {
+			regulator-name = "vreg_l9a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l10a_1p8: l10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l12a_1p8: l12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+		vreg_l13a_2p95: l13 {
+			regulator-name = "vreg_l13a_2p95";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		vreg_l14a_1p8: l14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l15a_1p8: l15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_l16a_2p7: l16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		vreg_l19a_3p3: l19 {
+			regulator-name = "vreg_l19a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		vreg_l20a_2p95: l20 {
+			regulator-name = "vreg_l20a_2p95";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-name = "vreg_l21a_2p95";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+		vreg_l23a_2p8: l23 {
+			regulator-name = "vreg_l23a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l24a_3p075: l24 {
+			regulator-name = "vreg_l24a_3p075";
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+		vreg_l25a_1p2: l25 {
+			regulator-name = "vreg_l25a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+		vreg_l27a_1p2: l27 {
+			regulator-name = "vreg_l27a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vreg_l28a_0p925: l28 {
+			regulator-name = "vreg_l28a_0p925";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+		vreg_l30a_1p8: l30 {
+			regulator-name = "vreg_l30a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			/* Required by QCA6174a - vddio-xtal */
+			regulator-always-on;
+		};
+		vreg_l32a_1p8: l32 {
+			regulator-name = "vreg_l32a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_bst_byp-supply = <&vph_pwr>;
+
+		vreg_s1b_1p025: s1 {
+			regulator-name = "vreg_s1b_1p025";
+			regulator-min-microvolt = <1025000>;
+			regulator-max-microvolt = <1025000>;
+		};
+
+		vph_pwr_bbyp: boost-bypass {
+			regulator-name = "vph_pwr_bbyp";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&pm8994_spmi_regulators {
+	qcom,saw-reg = <&saw3>;
+	s8 {
+		qcom,saw-slave;
+	};
+	s9 {
+		qcom,saw-slave;
+	};
+	s10 {
+		qcom,saw-slave;
+	};
+	vreg_apc_0p8: s11 {
+		qcom,saw-leader;
+		regulator-name = "vreg_apc_0p8";
+		regulator-min-microvolt = <470000>;
+		regulator-max-microvolt = <1140000>;
+		regulator-max-step-microvolt = <150000>;
+		regulator-always-on;
+	};
+};
+
+&pmi8994_spmi_regulators {
+	vdd_gfx: s2 {
+		regulator-name = "vdd_gfx";
+		regulator-min-microvolt = <400000>;
+		regulator-max-microvolt = <1015000>;
+		regulator-enable-ramp-delay = <500>;
+	};
+};
+
+&pm8994_gpios {
+	irled_default: irled-default-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
+	};
+
+	wlan_en_default: wlan-en-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
+	};
+
+	rome_enable_default: rome-enable-state {
+		pins = "gpio9";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		output-high;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_VPH>;
+	};
+
+	divclk1_default: divclk1-state {
+		pins = "gpio15";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+
+	divclk4_pin_a: divclk4-state {
+		pins = "gpio18";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&tlmm {
+	mdss_dsi_default: mdss-dsi-default-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_sleep: mdss-dsi-sleep-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_default: mdss-te-default-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_sleep: mdss-te-sleep-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_default: nfc-default-state {
+		pins = "gpio12", "gpio21";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
new file mode 100644
index 000000000..f8e9d90af
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+#include <dt-bindings/input/ti-drv260x.h>
+
+/ {
+	model = "Xiaomi Mi 5";
+	compatible = "xiaomi,gemini", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,msm-id = <246 0x30001>;
+	qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>;
+	qcom,board-id = <31 0>;
+
+	divclk2_haptics: divclk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "divclk2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&divclk2_pin_a>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/gemini/adsp.mbn";
+};
+
+&blsp2_i2c3 {
+	haptics: drv2604@5a {
+		compatible = "ti,drv2604";
+		reg = <0x5a>;
+		enable-gpio = <&tlmm 93 0x00>;
+		mode = <DRV260X_LRA_MODE>;
+		library-sel = <DRV260X_LIB_LRA>;
+		pinctrl-names = "default","sleep";
+		pinctrl-0 = <&vibrator_default>;
+		pinctrl-1 = <&vibrator_sleep>;
+	};
+
+	lp5562@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-gpios = <&pm8994_gpios 7 1>;
+		clock-mode = /bits/8 <2>;
+		label = "button-backlight";
+
+		led@0 {
+			reg = <0>;
+			chan-name = "button-backlight";
+			led-cur = /bits/ 8 <0x32>;
+			max-cur = /bits/ 8 <0xc8>;
+		};
+
+		led@1 {
+			reg = <0>;
+			chan-name = "button-backlight1";
+			led-cur = /bits/ 8 <0x32>;
+			max-cur = /bits/ 8 <0xc8>;
+		};
+	};
+};
+
+&blsp2_i2c6 {
+	synaptics@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		vio-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_sleep>;
+	};
+
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l2a_1p25>;
+	vdda-supply = <&vreg_l19a_3p3>;
+	vddio-supply = <&vreg_l14a_1p8>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+	pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+	panel: panel@0 {
+		compatible = "jdi,fhd-r63452";
+		reg = <0>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+		backlight = <&pmi8994_wled>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&pmi8994_wled {
+	status = "okay";
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/gemini/mba.mbn",
+			"qcom/msm8996/gemini/modem.mbn";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/gemini/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "gemini";
+	audio-routing = "RX_BIAS", "MCLK",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/gemini/venus.mbn";
+};
+
+&rpm_requests {
+	regulators-0 {
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+		vreg_l29a_2p7: l29 {
+			regulator-name = "vreg_l29a_2p7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"VOL_UP_N",		/* GPIO_2  */
+		"SPKR_ID",		/* GPIO_3  */
+		"PWM_HAPTICS",		/* GPIO_4  */
+		"INFARED_DRV",		/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"KEYPAD_LED_EN",	/* GPIO_7  */
+		"WL_EN",		/* GPIO_8  */
+		"3P3_ENABLE",		/* GPIO_9  */
+		"FP_ID",		/* GPIO_10 */
+		"NC",			/* GPIO_11 */
+		"NC",			/* GPIO_12 */
+		"NC",			/* GPIO_13 */
+		"NC",			/* GPIO_14 */
+		"DIVCLK1_CDC",		/* GPIO_15 */
+		"DIVCLK2_HAPTICS",	/* GPIO_16 */
+		"NC",			/* GPIO_17 */
+		"32KHz_CLK_IN",		/* GPIO_18 */
+		"BT_EN",		/* GPIO_19 */
+		"PMIC_SLB",		/* GPIO_20 */
+		"UIM_BATT_ALARM",	/* GPIO_21 */
+		"NC";			/* GPIO_22 */
+
+	divclk2_pin_a: divclk2-state {
+		pins = "gpio16";
+		function = PMIC_GPIO_FUNC_FUNC2;
+		bias-disable;
+		power-source = <PM8994_GPIO_S4>;
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"NC",			/* MPP_1 */
+		"CCI_TIMER1",		/* MPP_2 */
+		"PMIC_SLB",		/* MPP_3 */
+		"EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+		"NC",			/* MPP_5 */
+		"NC",			/* MPP_6 */
+		"NC",			/* MPP_7 */
+		"NC";			/* MPP_8 */
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"SPKR_PA_RST",		/* GPIO_2  */
+		"NC",			/* GPIO_3  */
+		"NC",			/* GPIO_4  */
+		"NC",			/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"NC",			/* GPIO_7  */
+		"NC",			/* GPIO_8  */
+		"NC",			/* GPIO_9  */
+		"NC";			/* GPIO_10 */
+};
+
+&tlmm {
+	gpio-line-names =
+		"ESE_SPI_MOSI",		/* GPIO_0   */
+		"ESE_SPI_MISO",		/* GPIO_1   */
+		"ERR_INT_N",		/* GPIO_2   */
+		"ESE_SPI_CLK",		/* GPIO_3   */
+		"MSM_UART_TX",		/* GPIO_4   */
+		"MSM_UART_RX",		/* GPIO_5   */
+		"NFC_I2C_SDA",		/* GPIO_6   */
+		"NFC_I2C_SCL",		/* GPIO_7   */
+		"LCD0_RESET_N",		/* GPIO_8   */
+		"NFC_IRQ",		/* GPIO_9   */
+		"LCD_TE",		/* GPIO_10  */
+		"LCD_ID_DET1",		/* GPIO_11  */
+		"NFC_DISABLE",		/* GPIO_12  */
+		"CAM_MCLK0",		/* GPIO_13  */
+		"NC",			/* GPIO_14  */
+		"CAM_MCLK2",		/* GPIO_15  */
+		"ESE_PWR_REQ",		/* GPIO_16  */
+		"CCI_I2C_SDA0",		/* GPIO_17  */
+		"CCI_I2C_SCL0",		/* GPIO_18  */
+		"CCI_I2C_SDA1",		/* GPIO_19  */
+		"CCI_I2C_SCL1",		/* GPIO_20  */
+		"NFC_DWL_REQ",		/* GPIO_21  */
+		"CCI_TIMER1",		/* GPIO_22  */
+		"WEBCAM1_RESET_N",	/* GPIO_23  */
+		"ESE_IRQ",		/* GPIO_24  */
+		"NC",			/* GPIO_25  */
+		"WEBCAM1_STANDBY",	/* GPIO_26  */
+		"NC",			/* GPIO_27  */
+		"NC",			/* GPIO_28  */
+		"NC",			/* GPIO_29  */
+		"CAM1_RST_N",		/* GPIO_30  */
+		"NC",			/* GPIO_31  */
+		"NC",			/* GPIO_32  */
+		"NC",			/* GPIO_33  */
+		"FP_DOME_SW",		/* GPIO_34  */
+		"PCI_E0_RST_N",		/* GPIO_35  */
+		"PCI_E0_CLKREQ_N",	/* GPIO_36  */
+		"PCI_E0_WAKE",		/* GPIO_37  */
+		"FM_INT_N",		/* GPIO_38  */
+		"FM_RESET_N",		/* GPIO_39  */
+		"NC",			/* GPIO_40  */
+		"QCA_UART_TXD",		/* GPIO_41  */
+		"QCA_UART_RXD",		/* GPIO_42  */
+		"QCA_UART_CTS",		/* GPIO_43  */
+		"QCA_UART_RTS",		/* GPIO_44  */
+		"MAWC_UART_TX",		/* GPIO_45  */
+		"MAWC_UART_RX",		/* GPIO_46  */
+		"NC",			/* GPIO_47  */
+		"NC",			/* GPIO_48  */
+		"AUDIO_SWITCH_EN",	/* GPIO_49  */
+		"FP_SPI_RST",		/* GPIO_50  */
+		"TYPEC_I2C_SDA",	/* GPIO_51  */
+		"TYPEC_I2C_SCL",	/* GPIO_52  */
+		"CODEC_INT2_N",		/* GPIO_53  */
+		"CODEC_INT1_N",		/* GPIO_54  */
+		"APPS_I2C7_SDA",	/* GPIO_55  */
+		"APPS_I2C7_SCL",	/* GPIO_56  */
+		"FORCE_USB_BOOT",	/* GPIO_57  */
+		"SPKR_I2S_BCK",		/* GPIO_58  */
+		"SPKR_I2S_WS",		/* GPIO_59  */
+		"SPKR_I2S_DOUT",	/* GPIO_60  */
+		"SPKR_I2S_DIN",		/* GPIO_61  */
+		"ESE_RSTN",		/* GPIO_62  */
+		"TYPEC_INT",		/* GPIO_63  */
+		"CODEC_RESET_N",	/* GPIO_64  */
+		"PCM_CLK",		/* GPIO_65  */
+		"PCM_SYNC",		/* GPIO_66  */
+		"PCM_DIN",		/* GPIO_67  */
+		"PCM_DOUT",		/* GPIO_68  */
+		"HIFI_CLK",		/* GPIO_69  */
+		"SLIMBUS_CLK",		/* GPIO_70  */
+		"SLIMBUS_DATA0",	/* GPIO_71  */
+		"SLIMBUS_DATA1",	/* GPIO_72  */
+		"LDO_5V_IN_EN",		/* GPIO_73  */
+		"NC",			/* GPIO_74  */
+		"FM_I2S_CLK",		/* GPIO_75  */
+		"FM_I2S_SYNC",		/* GPIO_76  */
+		"FM_I2S_DATA",		/* GPIO_77  */
+		"FM_STATUS",		/* GPIO_78  */
+		"NC",			/* GPIO_79  */
+		"SENSOR_RESET_N",	/* GPIO_80  */
+		"FP_SPI_MOSI",		/* GPIO_81  */
+		"FP_SPI_MISO",		/* GPIO_82  */
+		"FP_SPI_CS_N",		/* GPIO_83  */
+		"FP_SPI_CLK",		/* GPIO_84  */
+		"NC",			/* GPIO_85  */
+		"CAM_VDD_1P05_EN",	/* GPIO_86  */
+		"MSM_TS_I2C_SDA",	/* GPIO_87  */
+		"MSM_TS_I2C_SCL",	/* GPIO_88  */
+		"TS_RESOUT_N",		/* GPIO_89  */
+		"ESE_SPI_CS_N",		/* GPIO_90  */
+		"NC",			/* GPIO_91  */
+		"NC",			/* GPIO_92  */
+		"HAPTICS_EN",		/* GPIO_93  */
+		"NC",			/* GPIO_94  */
+		"NC",			/* GPIO_95  */
+		"NC",			/* GPIO_96  */
+		"NC",			/* GPIO_97  */
+		"GRFC_1",		/* GPIO_98  */
+		"NC",			/* GPIO_99  */
+		"GRFC_3",		/* GPIO_100 */
+		"GRFC_4",		/* GPIO_101 */
+		"NC",			/* GPIO_102 */
+		"NC",			/* GPIO_103 */
+		"GRFC_7",		/* GPIO_104 */
+		"UIM2_DATA",		/* GPIO_105 */
+		"UIM2_CLK",		/* GPIO_106 */
+		"UIM2_RESET",		/* GPIO_107 */
+		"UIM2_PRESENT",		/* GPIO_108 */
+		"UIM1_DATA",		/* GPIO_109 */
+		"UIM1_CLK",		/* GPIO_110 */
+		"UIM1_RESET",		/* GPIO_111 */
+		"UIM1_PRESENT",		/* GPIO_112 */
+		"UIM_BATT_ALARM",	/* GPIO_113 */
+		"GRFC_8",		/* GPIO_114 */
+		"GRFC_9",		/* GPIO_115 */
+		"TX_GTR_THRES",		/* GPIO_116 */
+		"ACCEL_INT",		/* GPIO_117 */
+		"GYRO_INT",		/* GPIO_118 */
+		"COMPASS_INT",		/* GPIO_119 */
+		"PROXIMITY_INT_N",	/* GPIO_120 */
+		"FP_IRQ",		/* GPIO_121 */
+		"NC",			/* GPIO_122 */
+		"HALL_INTR2",		/* GPIO_123 */
+		"HALL_INTR1",		/* GPIO_124 */
+		"TS_INT_N",		/* GPIO_125 */
+		"NC",			/* GPIO_126 */
+		"GRFC_11",		/* GPIO_127 */
+		"NC",			/* GPIO_128 */
+		"EXT_GPS_LNA_EN",	/* GPIO_129 */
+		"NC",			/* GPIO_130 */
+		"NC",			/* GPIO_131 */
+		"NC",			/* GPIO_132 */
+		"GRFC_14",		/* GPIO_133 */
+		"GSM_TX2_PHASE_D",	/* GPIO_134 */
+		"NC",			/* GPIO_135 */
+		"NC",			/* GPIO_136 */
+		"RFFE3_DATA",		/* GPIO_137 */
+		"RFFE3_CLK",		/* GPIO_138 */
+		"NC",			/* GPIO_139 */
+		"NC",			/* GPIO_140 */
+		"RFFE5_DATA",		/* GPIO_141 */
+		"RFFE5_CLK",		/* GPIO_142 */
+		"NC",			/* GPIO_143 */
+		"COEX_UART_TX",		/* GPIO_144 */
+		"COEX_UART_RX",		/* GPIO_145 */
+		"RFFE2_DATA",		/* GPIO_146 */
+		"RFFE2_CLK",		/* GPIO_147 */
+		"RFFE1_DATA",		/* GPIO_148 */
+		"RFFE1_CLK";		/* GPIO_149 */
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+
+	touchscreen_sleep: touchscreen-sleep-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vibrator_default: vibrator-default-state {
+		pins = "gpio93";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	vibrator_sleep: vibrator-sleep-state {
+		pins = "gpio93";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
new file mode 100644
index 000000000..c8e098642
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -0,0 +1,3883 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,msm8996.h>
+#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 0>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 0>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 1>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			capacity-dmips-mhz = <1024>;
+			clocks = <&kryocc 1>;
+			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x00000004>;
+				entry-latency-us = <130>;
+				exit-latency-us = <80>;
+				min-residency-us = <300>;
+			};
+		};
+	};
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		/* Nominal fmax for now */
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <460800>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <825600>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <825600>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-supported-hw = <0xd>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1056000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x2>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-supported-hw = <0xd>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-supported-hw = <0x9>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-supported-hw = <0x04>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x9>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1382400>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		/* Nominal fmax for now */
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <460800>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <595200>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <672000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <748800>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <825600>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <979200>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1056000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1228800>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-supported-hw = <0xf>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-supported-hw = <0xe>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1382400>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1305600>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1459200>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8996", "qcom,scm";
+			qcom,dload-mode = <&tcsr_2 0x13000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8996";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8996-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp1: opp1 {
+							opp-level = <1>;
+						};
+
+						rpmpd_opp2: opp2 {
+							opp-level = <2>;
+						};
+
+						rpmpd_opp3: opp3 {
+							opp-level = <3>;
+						};
+
+						rpmpd_opp4: opp4 {
+							opp-level = <4>;
+						};
+
+						rpmpd_opp5: opp5 {
+							opp-level = <5>;
+						};
+
+						rpmpd_opp6: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+		};
+
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2600000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs {
+			compatible = "qcom,rmtfs-mem";
+
+			size = <0x0 0x200000>;
+			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		mpss_mem: mpss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x6200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8ea00000 {
+			reg = <0x0 0x8ea00000 0x0 0x1b00000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@90500000 {
+			reg = <0x0 0x90500000 0x0 0xa00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@90f00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x90f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_mem: venus@91000000 {
+			reg = <0x0 0x91000000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: mba@91500000 {
+			reg = <0x0 0x91500000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		mpss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		mpss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		pcie_phy: phy-wrapper@34000 {
+			compatible = "qcom,msm8996-qmp-pcie-phy";
+			reg = <0x00034000 0x488>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x00034000 0x4000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+				<&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_PCIE_PHY_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_BCR>,
+				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+			reset-names = "phy", "common", "cfg";
+
+			status = "disabled";
+
+			pciephy_0: phy@1000 {
+				reg = <0x1000 0x130>,
+				      <0x1200 0x200>,
+				      <0x1400 0x1dc>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+				reset-names = "lane0";
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk_src";
+
+				#phy-cells = <0>;
+			};
+
+			pciephy_1: phy@2000 {
+				reg = <0x2000 0x130>,
+				      <0x2200 0x200>,
+				      <0x2400 0x1dc>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe1";
+				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+				reset-names = "lane1";
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk_src";
+
+				#phy-cells = <0>;
+			};
+
+			pciephy_2: phy@3000 {
+				reg = <0x3000 0x130>,
+				      <0x3200 0x200>,
+				      <0x3400 0x1dc>;
+
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe2";
+				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+				reset-names = "lane2";
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_2_pipe_clk_src";
+
+				#phy-cells = <0>;
+			};
+		};
+
+		rpm_msg_ram: sram@68000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00068000 0x6000>;
+		};
+
+		qfprom@74000 {
+			compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+			reg = <0x00074000 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx_trim@24e {
+				reg = <0x24e 0x2>;
+				bits = <5 4>;
+			};
+
+			qusb2s_hstx_trim: hstx_trim@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 4>;
+			};
+
+			speedbin_efuse: speedbin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rng: rng@83000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00083000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00300000 0x90000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&sleep_clk>,
+				 <&pciephy_0>,
+				 <&pciephy_1>,
+				 <&pciephy_2>,
+				 <&ssusb_phy_0>,
+				 <&ufsphy_lane 0>,
+				 <&ufsphy_lane 1>,
+				 <&ufsphy_lane 2>;
+			clock-names = "cxo",
+				      "cxo2",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk_src",
+				      "pcie_1_pipe_clk_src",
+				      "pcie_2_pipe_clk_src",
+				      "usb3_phy_pipe_clk_src",
+				      "ufs_rx_symbol_0_clk_src",
+				      "ufs_rx_symbol_1_clk_src",
+				      "ufs_tx_symbol_0_clk_src";
+		};
+
+		bimc: interconnect@408000 {
+			compatible = "qcom,msm8996-bimc";
+			reg = <0x00408000 0x5a000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@4ad000 {
+			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
+			reg = <0x004ad000 0x1000>, /* TM */
+			      <0x004ac000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@644000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x00644000 0x24000>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@67a000 {
+			compatible = "qcom,crypto-v5.4";
+			reg = <0x0067a000 0x6000>;
+			clocks = <&gcc GCC_CE1_AHB_CLK>,
+				 <&gcc GCC_CE1_AXI_CLK>,
+				 <&gcc GCC_CE1_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+		};
+
+		cnoc: interconnect@500000 {
+			compatible = "qcom,msm8996-cnoc";
+			reg = <0x00500000 0x1000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		snoc: interconnect@524000 {
+			compatible = "qcom,msm8996-snoc";
+			reg = <0x00524000 0x1c000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		a0noc: interconnect@543000 {
+			compatible = "qcom,msm8996-a0noc";
+			reg = <0x00543000 0x6000>;
+			#interconnect-cells = <1>;
+			clock-names = "aggre0_snoc_axi",
+				      "aggre0_cnoc_ahb",
+				      "aggre0_noc_mpu_cfg";
+			clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
+				 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+		};
+
+		a1noc: interconnect@562000 {
+			compatible = "qcom,msm8996-a1noc";
+			reg = <0x00562000 0x5000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
+		};
+
+		a2noc: interconnect@583000 {
+			compatible = "qcom,msm8996-a2noc";
+			reg = <0x00583000 0x7000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>;
+		};
+
+		mnoc: interconnect@5a4000 {
+			compatible = "qcom,msm8996-mnoc";
+			reg = <0x005a4000 0x1c000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "iface";
+			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
+				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
+				 <&mmcc AHB_CLK_SRC>;
+		};
+
+		pnoc: interconnect@5c0000 {
+			compatible = "qcom,msm8996-pnoc";
+			reg = <0x005c0000 0x3000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		tcsr_mutex: hwlock@740000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00740000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_1: syscon@760000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x00760000 0x20000>;
+		};
+
+		tcsr_2: syscon@7a0000 {
+			compatible = "qcom,tcsr-msm8996", "syscon";
+			reg = <0x007a0000 0x18000>;
+		};
+
+		mmcc: clock-controller@8c0000 {
+			compatible = "qcom,mmcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x008c0000 0x40000>;
+			clocks = <&xo_board>,
+				 <&gcc GPLL0>,
+				 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_hdmi_phy>;
+			clock-names = "xo",
+				      "gpll0",
+				      "gcc_mmss_noc_cfg_ahb_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte",
+				      "hdmipll";
+			assigned-clocks = <&mmcc MMPLL9_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <624000000>,
+					       <810000000>,
+					       <980000000>,
+					       <960000000>,
+					       <825000000>;
+		};
+
+		mdss: display-subsystem@900000 {
+			compatible = "qcom,mdss";
+
+			reg = <0x00900000 0x1000>,
+			      <0x009b0000 0x1040>,
+			      <0x009b8000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys",
+				    "vbif_nrt_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@901000 {
+				compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
+				reg = <0x00901000 0x90000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc SMMU_MDP_AXI_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "iommu",
+					      "vsync";
+
+				iommus = <&mdp_smmu 0>;
+
+				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+					 <19200000>;
+
+				interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
+						<&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
+						<&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
+				interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf3_out: endpoint {
+							remote-endpoint = <&mdss_hdmi_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@994000 {
+				compatible = "qcom,msm8996-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x00994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				phys = <&mdss_dsi0_phy>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@994400 {
+				compatible = "qcom,dsi-phy-14nm";
+				reg = <0x00994400 0x100>,
+				      <0x00994500 0x300>,
+				      <0x00994800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@996000 {
+				compatible = "qcom,msm8996-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x00996000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MMSS_MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				phys = <&mdss_dsi1_phy>;
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@996400 {
+				compatible = "qcom,dsi-phy-14nm";
+				reg = <0x00996400 0x100>,
+				      <0x00996500 0x300>,
+				      <0x00996800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+
+			mdss_hdmi: hdmi-tx@9a0000 {
+				compatible = "qcom,hdmi-tx-8996";
+				reg = <0x009a0000 0x50c>,
+				      <0x00070000 0x6158>,
+				      <0x009e0000 0xfff>;
+				reg-names = "core_physical",
+					    "qfprom_physical",
+					    "hdcp_physical";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <8>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_HDMI_CLK>,
+					 <&mmcc MDSS_HDMI_AHB_CLK>,
+					 <&mmcc MDSS_EXTPCLK_CLK>;
+				clock-names =
+					"mdp_core",
+					"iface",
+					"core",
+					"alt_iface",
+					"extp";
+
+				phys = <&mdss_hdmi_phy>;
+				#sound-dai-cells = <1>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_hdmi_in: endpoint {
+							remote-endpoint = <&mdp5_intf3_out>;
+						};
+					};
+				};
+			};
+
+			mdss_hdmi_phy: phy@9a0600 {
+				#phy-cells = <0>;
+				compatible = "qcom,hdmi-phy-8996";
+				reg = <0x009a0600 0x1c4>,
+				      <0x009a0a00 0x124>,
+				      <0x009a0c00 0x124>,
+				      <0x009a0e00 0x124>,
+				      <0x009a1000 0x124>,
+				      <0x009a1200 0x0c8>;
+				reg-names = "hdmi_pll",
+					    "hdmi_tx_l0",
+					    "hdmi_tx_l1",
+					    "hdmi_tx_l2",
+					    "hdmi_tx_l3",
+					    "hdmi_phy";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&gcc GCC_HDMI_CLKREF_CLK>,
+					 <&xo_board>;
+				clock-names = "iface",
+					      "ref",
+					      "xo";
+
+				#clock-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@b00000 {
+			compatible = "qcom,adreno-530.2", "qcom,adreno";
+
+			reg = <0x00b00000 0x3f000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+				<&mmcc GPU_AHB_CLK>,
+				<&mmcc GPU_GX_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+			clock-names = "core",
+				"iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface";
+
+			interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
+			interconnect-names = "gfx-mem";
+
+			power-domains = <&mmcc GPU_GX_GDSC>;
+			iommus = <&adreno_smmu 0>;
+
+			nvmem-cells = <&speedbin_efuse>;
+			nvmem-cell-names = "speed_bin";
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			status = "disabled";
+
+			#cooling-cells = <2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * 624Mhz is only available on speed bins 0 and 3.
+				 * 560Mhz is only available on speed bins 0, 2 and 3.
+				 * All the rest are available on all bins of the hardware.
+				 */
+				opp-624000000 {
+					opp-hz = /bits/ 64 <624000000>;
+					opp-supported-hw = <0x09>;
+				};
+				opp-560000000 {
+					opp-hz = /bits/ 64 <560000000>;
+					opp-supported-hw = <0x0d>;
+				};
+				opp-510000000 {
+					opp-hz = /bits/ 64 <510000000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-401800000 {
+					opp-hz = /bits/ 64 <401800000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-214000000 {
+					opp-hz = /bits/ 64 <214000000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-133000000 {
+					opp-hz = /bits/ 64 <133000000>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+		};
+
+		tlmm: pinctrl@1010000 {
+			compatible = "qcom,msm8996-pinctrl";
+			reg = <0x01010000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 150>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				spi-pins {
+					pins = "gpio0", "gpio1", "gpio3";
+					function = "blsp_spi1";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio2";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart8";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_default: blsp2-i2c2-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c8";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_default: blsp1-i2c6-state {
+				pins = "gpio27", "gpio28";
+				function = "blsp_i2c6";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio27", "gpio28";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			camera0_state_on:
+			camera_rear_default: camera-rear-default-state {
+				camera0_mclk: mclk0-pins {
+					pins = "gpio13";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				camera0_rst: rst-pins {
+					pins = "gpio25";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				camera0_pwdn: pwdn-pins {
+					pins = "gpio26";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			camera1_state_on:
+			camera_board_default: camera-board-default-state {
+				mclk1-pins {
+					pins = "gpio14";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				pwdn-pins {
+					pins = "gpio98";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				rst-pins {
+					pins = "gpio104";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			camera2_state_on:
+			camera_front_default: camera-front-default-state {
+				camera2_mclk: mclk2-pins {
+					pins = "gpio15";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				camera2_rst: rst-pins {
+					pins = "gpio23";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				pwdn-pins {
+					pins = "gpio133";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			pcie0_state_on: pcie0-state-on-state {
+				perst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio36";
+					function = "pci_e0";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie0_state_off: pcie0-state-off-state {
+				perst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio36";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				wake-pins {
+					pins = "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "blsp_uart2";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c3";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "blsp_uart9";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "blsp_uart9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_default: blsp2-i2c3-state-state {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
+				pins = "gpio51", "gpio52";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			wcd_intr_default: wcd-intr-default-state {
+				pins = "gpio54";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-state {
+				pins = "gpio55", "gpio56";
+				function = "blsp_i2c7";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio55", "gpio56";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_default: blsp2-i2c5-state {
+				pins = "gpio60", "gpio61";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			/* Sleep state for BLSP2_I2C5 is missing.. */
+
+			cdc_reset_active: cdc-reset-active-state {
+				pins = "gpio64";
+				function = "gpio";
+				drive-strength = <16>;
+				bias-pull-down;
+				output-high;
+			};
+
+			cdc_reset_sleep: cdc-reset-sleep-state {
+				pins = "gpio64";
+				function = "gpio";
+				drive-strength = <16>;
+				bias-disable;
+				output-low;
+			};
+
+			blsp2_spi6_default: blsp2-spi6-default-state {
+				spi-pins {
+					pins = "gpio85", "gpio86", "gpio88";
+					function = "blsp_spi12";
+					drive-strength = <12>;
+					bias-disable;
+				};
+
+				cs-pins {
+					pins = "gpio87";
+					function = "gpio";
+					drive-strength = <16>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			blsp2_spi6_sleep: blsp2-spi6-sleep-state {
+				pins = "gpio85", "gpio86", "gpio87", "gpio88";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c12";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			pcie1_state_on: pcie1-on-state {
+				perst-pins {
+					pins = "gpio130";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio131";
+					function = "pci_e1";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio132";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			pcie1_state_off: pcie1-off-state {
+				/* Perst is missing? */
+				clkreq-pins {
+					pins = "gpio131";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				wake-pins {
+					pins = "gpio132";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			pcie2_state_on: pcie2-on-state {
+				perst-pins {
+					pins = "gpio114";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio115";
+					function = "pci_e2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio116";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			pcie2_state_off: pcie2-off-state {
+				/* Perst is missing? */
+				clkreq-pins {
+					pins = "gpio115";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				wake-pins {
+					pins = "gpio116";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0400f000 0x1000>,
+			      <0x04400000 0x800000>,
+			      <0x04c00000 0x800000>,
+			      <0x05800000 0x200000>,
+			      <0x0400a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bus@0 {
+			power-domains = <&gcc AGGRE0_NOC_GDSC>;
+			compatible = "simple-pm-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xffffffff>;
+
+			pcie0: pcie@600000 {
+				compatible = "qcom,pcie-msm8996";
+				status = "disabled";
+				power-domains = <&gcc PCIE0_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				reg = <0x00600000 0x2000>,
+				      <0x0c000000 0xf1d>,
+				      <0x0c000f20 0xa8>,
+				      <0x0c100000 0x100000>;
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_0>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie0_state_on>;
+				pinctrl-1 = <&pcie0_state_off>;
+
+				linux,pci-domain = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+					<&gcc GCC_PCIE_0_AUX_CLK>,
+					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+				clock-names = "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie1: pcie@608000 {
+				compatible = "qcom,pcie-msm8996";
+				power-domains = <&gcc PCIE1_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+
+				status = "disabled";
+
+				reg = <0x00608000 0x2000>,
+				      <0x0d000000 0xf1d>,
+				      <0x0d000f20 0xa8>,
+				      <0x0d100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_1>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie1_state_on>;
+				pinctrl-1 = <&pcie1_state_off>;
+
+				linux,pci-domain = <1>;
+
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+					<&gcc GCC_PCIE_1_AUX_CLK>,
+					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+				clock-names = "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+
+			pcie2: pcie@610000 {
+				compatible = "qcom,pcie-msm8996";
+				power-domains = <&gcc PCIE2_GDSC>;
+				bus-range = <0x00 0xff>;
+				num-lanes = <1>;
+				status = "disabled";
+				reg = <0x00610000 0x2000>,
+				      <0x0e000000 0xf1d>,
+				      <0x0e000f20 0xa8>,
+				      <0x0e100000 0x100000>;
+
+				reg-names = "parf", "dbi", "elbi","config";
+
+				phys = <&pciephy_2>;
+				phy-names = "pciephy";
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
+					 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+				device_type = "pci";
+
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "msi";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0x7>;
+				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+				pinctrl-names = "default", "sleep";
+				pinctrl-0 = <&pcie2_state_on>;
+				pinctrl-1 = <&pcie2_state_off>;
+
+				linux,pci-domain = <2>;
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+					<&gcc GCC_PCIE_2_AUX_CLK>,
+					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+				clock-names = "pipe",
+						"aux",
+						"cfg",
+						"bus_master",
+						"bus_slave";
+			};
+		};
+
+		ufshc: ufshc@624000 {
+			compatible = "qcom,msm8996-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x00624000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+			phys = <&ufsphy_lane>;
+			phy-names = "ufsphy";
+
+			power-domains = <&gcc UFS_GDSC>;
+
+			clock-names =
+				"core_clk_src",
+				"core_clk",
+				"bus_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro_src",
+				"core_clk_unipro",
+				"core_clk_ice",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk";
+			clocks =
+				<&gcc UFS_AXI_CLK_SRC>,
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc UFS_ICE_CORE_CLK_SRC>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&gcc GCC_UFS_ICE_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+			freq-table-hz =
+				<100000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<150000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ufsphy: phy@627000 {
+			compatible = "qcom,msm8996-qmp-ufs-phy";
+			reg = <0x00627000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref";
+
+			resets = <&ufshc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufsphy_lane: phy@627400 {
+				reg = <0x627400 0x12c>,
+				      <0x627600 0x200>,
+				      <0x627c00 0x1b4>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		camss: camss@a34000 {
+			compatible = "qcom,msm8996-camss";
+			reg = <0x00a34000 0x1000>,
+			      <0x00a00030 0x4>,
+			      <0x00a35000 0x1000>,
+			      <0x00a00038 0x4>,
+			      <0x00a36000 0x1000>,
+			      <0x00a00040 0x4>,
+			      <0x00a30000 0x100>,
+			      <0x00a30400 0x100>,
+			      <0x00a30800 0x100>,
+			      <0x00a30c00 0x100>,
+			      <0x00a31000 0x500>,
+			      <0x00a00020 0x10>,
+			      <0x00a10000 0x1000>,
+			      <0x00a14000 0x1000>;
+			reg-names = "csiphy0",
+				"csiphy0_clk_mux",
+				"csiphy1",
+				"csiphy1_clk_mux",
+				"csiphy2",
+				"csiphy2_clk_mux",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"csi_clk_mux",
+				"vfe0",
+				"vfe1";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csid0",
+				"csid1",
+				"csid2",
+				"csid3",
+				"ispif",
+				"vfe0",
+				"vfe1";
+			power-domains = <&mmcc VFE0_GDSC>,
+					<&mmcc VFE1_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				<&mmcc CAMSS_ISPIF_AHB_CLK>,
+				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				<&mmcc CAMSS_CSI0_AHB_CLK>,
+				<&mmcc CAMSS_CSI0_CLK>,
+				<&mmcc CAMSS_CSI0PHY_CLK>,
+				<&mmcc CAMSS_CSI0PIX_CLK>,
+				<&mmcc CAMSS_CSI0RDI_CLK>,
+				<&mmcc CAMSS_CSI1_AHB_CLK>,
+				<&mmcc CAMSS_CSI1_CLK>,
+				<&mmcc CAMSS_CSI1PHY_CLK>,
+				<&mmcc CAMSS_CSI1PIX_CLK>,
+				<&mmcc CAMSS_CSI1RDI_CLK>,
+				<&mmcc CAMSS_CSI2_AHB_CLK>,
+				<&mmcc CAMSS_CSI2_CLK>,
+				<&mmcc CAMSS_CSI2PHY_CLK>,
+				<&mmcc CAMSS_CSI2PIX_CLK>,
+				<&mmcc CAMSS_CSI2RDI_CLK>,
+				<&mmcc CAMSS_CSI3_AHB_CLK>,
+				<&mmcc CAMSS_CSI3_CLK>,
+				<&mmcc CAMSS_CSI3PHY_CLK>,
+				<&mmcc CAMSS_CSI3PIX_CLK>,
+				<&mmcc CAMSS_CSI3RDI_CLK>,
+				<&mmcc CAMSS_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_CLK>,
+				<&mmcc CAMSS_CSI_VFE0_CLK>,
+				<&mmcc CAMSS_VFE0_AHB_CLK>,
+				<&mmcc CAMSS_VFE0_STREAM_CLK>,
+				<&mmcc CAMSS_VFE1_CLK>,
+				<&mmcc CAMSS_CSI_VFE1_CLK>,
+				<&mmcc CAMSS_VFE1_AHB_CLK>,
+				<&mmcc CAMSS_VFE1_STREAM_CLK>,
+				<&mmcc CAMSS_VFE_AHB_CLK>,
+				<&mmcc CAMSS_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				"ispif_ahb",
+				"csiphy0_timer",
+				"csiphy1_timer",
+				"csiphy2_timer",
+				"csi0_ahb",
+				"csi0",
+				"csi0_phy",
+				"csi0_pix",
+				"csi0_rdi",
+				"csi1_ahb",
+				"csi1",
+				"csi1_phy",
+				"csi1_pix",
+				"csi1_rdi",
+				"csi2_ahb",
+				"csi2",
+				"csi2_phy",
+				"csi2_pix",
+				"csi2_rdi",
+				"csi3_ahb",
+				"csi3",
+				"csi3_phy",
+				"csi3_pix",
+				"csi3_rdi",
+				"ahb",
+				"vfe0",
+				"csi_vfe0",
+				"vfe0_ahb",
+				"vfe0_stream",
+				"vfe1",
+				"csi_vfe1",
+				"vfe1_ahb",
+				"vfe1_stream",
+				"vfe_ahb",
+				"vfe_axi";
+			iommus = <&vfe_smmu 0>,
+				 <&vfe_smmu 1>,
+				 <&vfe_smmu 2>,
+				 <&vfe_smmu 3>;
+			status = "disabled";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci: cci@a0c000 {
+			compatible = "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xa0c000 0x1000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&mmcc CAMSS_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CLK>,
+				 <&mmcc CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci",
+				      "camss_ahb";
+			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+					  <&mmcc CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		adreno_smmu: iommu@b40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0x00b40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
+				 <&mmcc GPU_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&mmcc GPU_GDSC>;
+		};
+
+		venus: video-codec@c00000 {
+			compatible = "qcom,msm8996-venus";
+			reg = <0x00c00000 0xff000>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc VIDEO_MAXI_CLK>;
+			clock-names = "core", "iface", "bus", "mbus";
+			interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
+			interconnect-names = "video-mem", "cpu-cfg";
+			iommus = <&venus_smmu 0x00>,
+				 <&venus_smmu 0x01>,
+				 <&venus_smmu 0x0a>,
+				 <&venus_smmu 0x07>,
+				 <&venus_smmu 0x0e>,
+				 <&venus_smmu 0x0f>,
+				 <&venus_smmu 0x08>,
+				 <&venus_smmu 0x09>,
+				 <&venus_smmu 0x0b>,
+				 <&venus_smmu 0x0c>,
+				 <&venus_smmu 0x0d>,
+				 <&venus_smmu 0x10>,
+				 <&venus_smmu 0x11>,
+				 <&venus_smmu 0x21>,
+				 <&venus_smmu 0x28>,
+				 <&venus_smmu 0x29>,
+				 <&venus_smmu 0x2b>,
+				 <&venus_smmu 0x2c>,
+				 <&venus_smmu 0x2d>,
+				 <&venus_smmu 0x31>;
+			memory-region = <&venus_mem>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+				clock-names = "core";
+				power-domains = <&mmcc VENUS_CORE1_GDSC>;
+			};
+		};
+
+		mdp_smmu: iommu@d00000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d00000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			clocks = <&mmcc SMMU_MDP_AXI_CLK>,
+				 <&mmcc SMMU_MDP_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+
+		venus_smmu: iommu@d40000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00d40000 0x20000>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+			clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
+				 <&mmcc SMMU_VIDEO_AHB_CLK>;
+			clock-names = "bus", "iface";
+			#iommu-cells = <1>;
+			status = "okay";
+		};
+
+		vfe_smmu: iommu@da0000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x00da0000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+			clocks = <&mmcc SMMU_VFE_AXI_CLK>,
+				 <&mmcc SMMU_VFE_AHB_CLK>;
+			clock-names = "bus", "iface";
+			#iommu-cells = <1>;
+		};
+
+		lpass_q6_smmu: iommu@1600000 {
+			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+			reg = <0x01600000 0x20000>;
+			#iommu-cells = <1>;
+			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
+				 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
+			clock-names = "bus", "iface";
+		};
+
+		slpi_pil: remoteproc@1c00000 {
+			compatible = "qcom,msm8996-slpi-pil";
+			reg = <0x01c00000 0x4000>;
+
+			interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&xo_board>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "xo", "aggre2";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8996_VDDSSCX>;
+			power-domain-names = "ssc_cx";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+
+				label = "dsps";
+				mboxes = <&apcs_glb 25>;
+				qcom,smd-edge = <3>;
+				qcom,remote-pid = <3>;
+			};
+		};
+
+		mss_pil: remoteproc@2080000 {
+			compatible = "qcom,msm8996-mss-pil";
+			reg = <0x2080000 0x100>,
+			      <0x2180000 0x020>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			power-domains = <&rpmpd MSM8996_VDDCX>,
+					<&rpmpd MSM8996_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&mpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			metadata {
+				memory-region = <&mdata_mem>;
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+
+				label = "mpss";
+				mboxes = <&apcs_glb 12>;
+				qcom,smd-edge = <0>;
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		stm@3002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x3002000 0x1000>,
+			      <0x8280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						  <&funnel0_in>;
+					};
+				};
+			};
+		};
+
+		tpiu@3020000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x3020000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					tpiu_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@3021000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3021000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in: endpoint {
+						remote-endpoint =
+						  <&stm_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		funnel@3022000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3022000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel1_in: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3023000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3023000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		funnel@3025000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3025000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&funnel1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&funnel2_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator@3026000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x3026000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint =
+						  <&etf_out>;
+					};
+				};
+			};
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint =
+						  <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint =
+						  <&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etf@3027000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x3027000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr@3028000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x3028000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		debug@3810000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3810000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU0>;
+		};
+
+		etm@3840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3840000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3910000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3910000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU1>;
+		};
+
+		etm@3940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3940000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@39b0000 { /* APSS Funnel 0 */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x39b0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel0_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3a10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3a10000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU2>;
+		};
+
+		etm@3a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3a40000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_in0>;
+					};
+				};
+			};
+		};
+
+		debug@3b10000 {
+			compatible = "arm,coresight-cpu-debug", "arm,primecell";
+			reg = <0x3b10000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			cpu = <&CPU3>;
+		};
+
+		etm@3b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x3b40000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3bb0000 { /* APSS Funnel 1 */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3bb0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel1_in0: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel1_in1: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_funnel1_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@3bc0000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x3bc0000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&apss_funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&apss_funnel1_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel1_in>;
+					};
+				};
+			};
+		};
+
+		kryocc: clock-controller@6400000 {
+			compatible = "qcom,msm8996-apcc";
+			reg = <0x06400000 0x90000>;
+
+			clock-names = "xo", "sys_apcs_aux";
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
+
+			#clock-cells = <1>;
+		};
+
+		usb3: usb@6af8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x06af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			power-domains = <&gcc USB30_GDSC>;
+			status = "disabled";
+
+			usb3_dwc3: usb@6a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x06a00000 0xcc00>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,is-utmi-l1-suspend;
+				tx-fifo-resize;
+			};
+		};
+
+		usb3phy: phy@7410000 {
+			compatible = "qcom,msm8996-qmp-usb3-phy";
+			reg = <0x07410000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				<&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+			status = "disabled";
+
+			ssusb_phy_0: phy@7410200 {
+				reg = <0x07410200 0x200>,
+				      <0x07410400 0x130>,
+				      <0x07410600 0x1a8>;
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "usb3_phy_pipe_clk_src";
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+			};
+		};
+
+		hsusb_phy1: phy@7411000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07411000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2p_hstx_trim>;
+			status = "disabled";
+		};
+
+		hsusb_phy2: phy@7412000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x07412000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2s_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc1: mmc@7464900 {
+			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x07464900 0x11c>, <0x07464000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				<&gcc GCC_SDCC1_APPS_CLK>,
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc2: mmc@74a4900 {
+			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				<&gcc GCC_SDCC2_APPS_CLK>,
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+
+			bus-width = <4>;
+			status = "disabled";
+		 };
+
+		blsp1_dma: dma-controller@7544000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07544000 0x2b000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart2: serial@7570000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07570000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@7575000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07575000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi1_default>;
+			pinctrl-1 = <&blsp1_spi1_sleep>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@7577000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07577000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c6: i2c@757a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x757a000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7584000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07584000 0x2b000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_uart2: serial@75b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b0000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_uart3: serial@75b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b1000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@75b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b5000 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c2: i2c@75b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b6000 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c3: i2c@75b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x075b7000 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c3_default>;
+			pinctrl-1 = <&blsp2_i2c3_sleep>;
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c5: i2c@75b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x75b9000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_i2c6: i2c@75ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x75ba000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi6: spi@75ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x075ba000 0x600>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_spi6_default>;
+			pinctrl-1 = <&blsp2_spi6_sleep>;
+			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2: usb@76f8800 {
+			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+			reg = <0x076f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
+				<&gcc GCC_USB20_MASTER_CLK>,
+				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				<&gcc GCC_USB20_SLEEP_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <60000000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb2_dwc3: usb@7600000 {
+				compatible = "snps,dwc3";
+				reg = <0x07600000 0xcc00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+			};
+		};
+
+		slimbam: dma-controller@9184000 {
+			compatible = "qcom,bam-v1.7.0";
+			qcom,controlled-remotely;
+			reg = <0x09184000 0x32000>;
+			num-channels = <31>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+		};
+
+		slim_msm: slim-ngd@91c0000 {
+			compatible = "qcom,slim-ngd-v1.5.0";
+			reg = <0x091c0000 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		adsp_pil: remoteproc@9300000 {
+			compatible = "qcom,msm8996-adsp-pil";
+			reg = <0x09300000 0x80000>;
+
+			interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8996_VDDCX>;
+			power-domain-names = "cx";
+
+			status = "disabled";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs_glb 8>;
+				qcom,smd-edge = <1>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+					compatible = "qcom,apr-v2";
+					qcom,smd-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							dai@1 {
+								reg = <1>;
+							};
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_q6_smmu 1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		apcs_glb: mailbox@9820000 {
+			compatible = "qcom,msm8996-apcs-hmss-global";
+			reg = <0x09820000 0x1000>;
+
+			#mbox-cells = <1>;
+			#clock-cells = <0>;
+		};
+
+		timer@9840000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x09840000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@9850000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09850000 0x1000>,
+				      <0x09860000 0x1000>;
+			};
+
+			frame@9870000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09870000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9880000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09880000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9890000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09890000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98a0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098a0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98b0000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098b0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98c0000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098c0000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw3: syscon@9a10000 {
+			compatible = "syscon";
+			reg = <0x09a10000 0x1000>;
+		};
+
+		cbf: clock-controller@9a11000 {
+			compatible = "qcom,msm8996-cbf";
+			reg = <0x09a11000 0x10000>;
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
+			#clock-cells = <0>;
+			#interconnect-cells = <1>;
+		};
+
+		intc: interrupt-controller@9bc0000 {
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x09bc0000 0x10000>,
+			      <0x09c00000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu2_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		m4m-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				m4m_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		l3-or-venus-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				l3_or_venus_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cluster0_l2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster1-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cluster1_l2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modemtx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				modemtx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
new file mode 100644
index 000000000..5e3fd1637
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Alec Su <ae40515@yahoo.com.tw>
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+/ {
+	model = "Xiaomi Mi 5s Plus";
+	compatible = "xiaomi,natrium", "qcom,msm8996pro", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,msm-id = <305 0x10000>;
+	qcom,board-id = <47 0>;
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/natrium/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vdd_3v2_tp>;
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <5>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_sleep>;
+	};
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&vreg_l2a_1p25>;
+	vcca-supply = <&vreg_l28a_0p925>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
+	pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
+
+	panel: panel@0 {
+		compatible = "jdi,fhd-r63452";
+		reg = <0>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+		backlight = <&pmi8994_wled>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/natrium/mba.mbn",
+			"qcom/msm8996/natrium/modem.mbn";
+};
+
+&pmi8994_wled {
+	status = "okay";
+
+	qcom,enabled-strings = <0 1>;
+	qcom,switching-freq = <600>;
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/natrium/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "natrium";
+	audio-routing = "RX_BIAS", "MCLK";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 6>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 1>;
+		};
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/natrium/venus.mbn";
+};
+
+&rpm_requests {
+	regulators-0 {
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		vreg_l11a_1p1: l11 {
+			regulator-name = "vreg_l11a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l18a_2p8: l18 {
+			regulator-name = "vreg_l18a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l29a_2p8: l29 {
+			regulator-name = "vreg_l29a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"VOL_UP_N",		/* GPIO_2  */
+		"SPKR_ID",		/* GPIO_3  */
+		"PWM_HAPTICS",		/* GPIO_4  */
+		"INFARED_DRV",		/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"KEYPAD_LED_EN_A",	/* GPIO_7  */
+		"WL_EN",		/* GPIO_8  */
+		"3P3_ENABLE",		/* GPIO_9  */
+		"NC",			/* GPIO_10 */
+		"NC",			/* GPIO_11 */
+		"NC",			/* GPIO_12 */
+		"NC",			/* GPIO_13 */
+		"NC",			/* GPIO_14 */
+		"DIVCLK1_CDC",		/* GPIO_15 */
+		"DIVCLK2_HAPTICS",	/* GPIO_16 */
+		"NC",			/* GPIO_17 */
+		"32KHz_CLK_IN",		/* GPIO_18 */
+		"BT_EN",		/* GPIO_19 */
+		"PMIC_SLB",		/* GPIO_20 */
+		"UIM_BATT_ALARM",	/* GPIO_21 */
+		"NC";			/* GPIO_22 */
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"NC",			/* MPP_1 */
+		"CCI_TIMER1",		/* MPP_2 */
+		"PMIC_SLB",		/* MPP_3 */
+		"EXT_FET_WLED_PWR_EN_N",/* MPP_4 */
+		"NC",			/* MPP_5 */
+		"NC",			/* MPP_6 */
+		"NC",			/* MPP_7 */
+		"NC";			/* MPP_8 */
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"SPKR_PA_EN",		/* GPIO_2  */
+		"NC",			/* GPIO_3  */
+		"NC",			/* GPIO_4  */
+		"NC",			/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"NC",			/* GPIO_7  */
+		"NC",			/* GPIO_8  */
+		"NC",			/* GPIO_9  */
+		"NC";			/* GPIO_10 */
+};
+
+&tlmm {
+	gpio-line-names =
+		"ESE_SPI_MOSI",		/* GPIO_0   */
+		"ESE_SPI_MISO",		/* GPIO_1   */
+		"NC",			/* GPIO_2   */
+		"ESE_SPI_CLK",		/* GPIO_3   */
+		"MSM_UART_TX",		/* GPIO_4   */
+		"MSM_UART_RX",		/* GPIO_5   */
+		"NFC_I2C_SDA",		/* GPIO_6   */
+		"NFC_I2C_SCL",		/* GPIO_7   */
+		"LCD0_RESET_N",		/* GPIO_8   */
+		"NFC_IRQ",		/* GPIO_9   */
+		"LCD_TE",		/* GPIO_10  */
+		"LCD_ID_DET1",		/* GPIO_11  */
+		"NFC_DISABLE",		/* GPIO_12  */
+		"CAM_MCLK0",		/* GPIO_13  */
+		"CAM_MCLK1",		/* GPIO_14  */
+		"CAM_MCLK2",		/* GPIO_15  */
+		"ESE_PWR_REQ",		/* GPIO_16  */
+		"CCI_I2C_SDA0",		/* GPIO_17  */
+		"CCI_I2C_SCL0",		/* GPIO_18  */
+		"CCI_I2C_SDA1",		/* GPIO_19  */
+		"CCI_I2C_SCL1",		/* GPIO_20  */
+		"NFC_DWL_REQ",		/* GPIO_21  */
+		"CCI_TIMER1",		/* GPIO_22  */
+		"WEBCAM1_RESET_N",	/* GPIO_23  */
+		"ESE_IRQ",		/* GPIO_24  */
+		"NC",			/* GPIO_25  */
+		"WEBCAM1_STANDBY",	/* GPIO_26  */
+		"NC",			/* GPIO_27  */
+		"NC",			/* GPIO_28  */
+		"NC",			/* GPIO_29  */
+		"CAM_VDD_1P2_EN_2",	/* GPIO_30  */
+		"CAM_RESET_0",		/* GPIO_31  */
+		"CAM_RESET_1",		/* GPIO_32  */
+		"NC",			/* GPIO_33  */
+		"NC",			/* GPIO_34  */
+		"PCI_E0_RST_N",		/* GPIO_35  */
+		"PCI_E0_CLKREQ_N",	/* GPIO_36  */
+		"PCI_E0_WAKE",		/* GPIO_37  */
+		"CHARGER_INT",		/* GPIO_38  */
+		"CHARGER_RESET",	/* GPIO_39  */
+		"NC",			/* GPIO_40  */
+		"QCA_UART_TXD",		/* GPIO_41  */
+		"QCA_UART_RXD",		/* GPIO_42  */
+		"QCA_UART_CTS",		/* GPIO_43  */
+		"QCA_UART_RTS",		/* GPIO_44  */
+		"MAWC_UART_TX",		/* GPIO_45  */
+		"MAWC_UART_RX",		/* GPIO_46  */
+		"NC",			/* GPIO_47  */
+		"NC",			/* GPIO_48  */
+		"NC",			/* GPIO_49  */
+		"FP_SPI_RST",		/* GPIO_50  */
+		"TYPEC_I2C_SDA",	/* GPIO_51  */
+		"TYPEC_I2C_SCL",	/* GPIO_52  */
+		"CODEC_INT2_N",		/* GPIO_53  */
+		"CODEC_INT1_N",		/* GPIO_54  */
+		"APPS_I2C7_SDA",	/* GPIO_55  */
+		"APPS_I2C7_SCL",	/* GPIO_56  */
+		"FORCE_USB_BOOT",	/* GPIO_57  */
+		"NC",			/* GPIO_58  */
+		"NC",			/* GPIO_59  */
+		"NC",			/* GPIO_60  */
+		"NC",			/* GPIO_61  */
+		"ESE_RSTN",		/* GPIO_62  */
+		"TYPEC_INT",		/* GPIO_63  */
+		"CODEC_RESET_N",	/* GPIO_64  */
+		"PCM_CLK",		/* GPIO_65  */
+		"PCM_SYNC",		/* GPIO_66  */
+		"PCM_DIN",		/* GPIO_67  */
+		"PCM_DOUT",		/* GPIO_68  */
+		"CDC_44K1_CLK",		/* GPIO_69  */
+		"SLIMBUS_CLK",		/* GPIO_70  */
+		"SLIMBUS_DATA0",	/* GPIO_71  */
+		"SLIMBUS_DATA1",	/* GPIO_72  */
+		"LDO_5V_IN_EN",		/* GPIO_73  */
+		"TYPEC_EN_N",		/* GPIO_74  */
+		"NC",			/* GPIO_75  */
+		"NC",			/* GPIO_76  */
+		"NC",			/* GPIO_77  */
+		"NC",			/* GPIO_78  */
+		"NC",			/* GPIO_79  */
+		"SENSOR_RESET_N",	/* GPIO_80  */
+		"FP_SPI_MOSI",		/* GPIO_81  */
+		"FP_SPI_MISO",		/* GPIO_82  */
+		"FP_SPI_CS_N",		/* GPIO_83  */
+		"FP_SPI_CLK",		/* GPIO_84  */
+		"NC",			/* GPIO_85  */
+		"CAM_VDD_1P2_EN",	/* GPIO_86  */
+		"MSM_TS_I2C_SDA",	/* GPIO_87  */
+		"MSM_TS_I2C_SCL",	/* GPIO_88  */
+		"TS_RESOUT_N",		/* GPIO_89  */
+		"ESE_SPI_CS_N",		/* GPIO_90  */
+		"NC",			/* GPIO_91  */
+		"CAM2_AVDD_EN",		/* GPIO_92  */
+		"CAM2_VCM_EN",		/* GPIO_93  */
+		"NC",			/* GPIO_94  */
+		"NC",			/* GPIO_95  */
+		"NC",			/* GPIO_96  */
+		"GRFC_0",		/* GPIO_97  */
+		"GRFC_1",		/* GPIO_98  */
+		"NC",			/* GPIO_99  */
+		"GRFC_3",		/* GPIO_100 */
+		"GRFC_4",		/* GPIO_101 */
+		"GRFC_5",		/* GPIO_102 */
+		"NC",			/* GPIO_103 */
+		"GRFC_7",		/* GPIO_104 */
+		"UIM2_DATA",		/* GPIO_105 */
+		"UIM2_CLK",		/* GPIO_106 */
+		"UIM2_RESET",		/* GPIO_107 */
+		"UIM2_PRESENT",		/* GPIO_108 */
+		"UIM1_DATA",		/* GPIO_109 */
+		"UIM1_CLK",		/* GPIO_110 */
+		"UIM1_RESET",		/* GPIO_111 */
+		"UIM1_PRESENT",		/* GPIO_112 */
+		"UIM_BATT_ALARM",	/* GPIO_113 */
+		"GRFC_8",		/* GPIO_114 */
+		"GRFC_9",		/* GPIO_115 */
+		"TX_GTR_THRES",		/* GPIO_116 */
+		"ACCEL_INT",		/* GPIO_117 */
+		"GYRO_INT",		/* GPIO_118 */
+		"COMPASS_INT",		/* GPIO_119 */
+		"PROXIMITY_INT_N",	/* GPIO_120 */
+		"FP_IRQ",		/* GPIO_121 */
+		"P_SENSE",		/* GPIO_122 */
+		"HALL_INTR2",		/* GPIO_123 */
+		"HALL_INTR1",		/* GPIO_124 */
+		"TS_INT_N",		/* GPIO_125 */
+		"NC",			/* GPIO_126 */
+		"GRFC_11",		/* GPIO_127 */
+		"NC",			/* GPIO_128 */
+		"EXT_GPS_LNA_EN",	/* GPIO_129 */
+		"NC",			/* GPIO_130 */
+		"LCD_ID_DET2",		/* GPIO_131 */
+		"LCD_TE2",		/* GPIO_132 */
+		"GRFC_14",		/* GPIO_133 */
+		"GSM_TX2_PHASE_D",	/* GPIO_134 */
+		"NC",			/* GPIO_135 */
+		"GRFC_15",		/* GPIO_136 */
+		"RFFE3_DATA",		/* GPIO_137 */
+		"RFFE3_CLK",		/* GPIO_138 */
+		"NC",			/* GPIO_139 */
+		"NC",			/* GPIO_140 */
+		"RFFE5_DATA",		/* GPIO_141 */
+		"RFFE5_CLK",		/* GPIO_142 */
+		"NC",			/* GPIO_143 */
+		"COEX_UART_TX",		/* GPIO_144 */
+		"COEX_UART_RX",		/* GPIO_145 */
+		"RFFE2_DATA",		/* GPIO_146 */
+		"RFFE2_CLK",		/* GPIO_147 */
+		"RFFE1_DATA",		/* GPIO_148 */
+		"RFFE1_CLK";		/* GPIO_149 */
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+
+	touchscreen_sleep: touchscreen-sleep-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
new file mode 100644
index 000000000..5e3b9130e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts
@@ -0,0 +1,499 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Yassine Oudjana <y.oudjana@protonmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8996pro.dtsi"
+#include "msm8996-xiaomi-common.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+	model = "Xiaomi Mi Note 2";
+	compatible = "xiaomi,scorpio", "qcom,msm8996pro", "qcom,msm8996";
+	chassis-type = "handset";
+	qcom,msm-id = <305 0x10000>;
+	qcom,board-id = <34 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@83401000 {
+			compatible = "simple-framebuffer";
+			reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			/* DSI0 and MDP SMMU clocks */
+			clocks = <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MMSS_MMAGIC_AHB_CLK>,
+				 <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MMSS_MISC_AHB_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>,
+				 <&mmcc SMMU_MDP_AHB_CLK>,
+				 <&mmcc SMMU_MDP_AXI_CLK>;
+
+			/* MDSS power domain */
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@83401000 {
+			reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/msm8996/scorpio/adsp.mbn";
+};
+
+&blsp2_i2c6 {
+	touchkey: touchkey@28 {
+		compatible = "cypress,sf3155";
+		reg = <0x28>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+		avdd-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		linux,keycodes = <KEY_BACK KEY_MENU>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchkey_default>;
+		pinctrl-1 = <&touchkey_sleep>;
+	};
+
+	touchscreen: atmel-mxt-ts@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		vdda-supply = <&vreg_l6a_1p8>;
+		vdd-supply = <&vdd_3v2_tp>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&touchscreen_default>;
+		pinctrl-1 = <&touchscreen_sleep>;
+	};
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn";
+	};
+};
+
+&mdp_smmu {
+	/*
+	 * Probing this SMMU causes a crash due to writing to some secure
+	 * registers. Disable it for now.
+	 */
+	status = "disabled";
+};
+
+&mdss {
+	/*
+	 * MDSS depends on the MDP SMMU, and probing it alters the bootloader
+	 * configured framebuffer used by simplefb. Disable it for now.
+	 */
+	status = "disabled";
+};
+
+&mss_pil {
+	firmware-name = "qcom/msm8996/scorpio/mba.mbn",
+			"qcom/msm8996/scorpio/modem.mbn";
+};
+
+&pm8994_lpg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_default>;
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		function-enumerator = <1>;
+	};
+
+	led@6 {
+		reg = <6>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_KBD_BACKLIGHT;
+		function-enumerator = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&slpi_pil {
+	firmware-name = "qcom/msm8996/scorpio/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,apq8096-sndcard";
+	model = "scorpio";
+	audio-routing = "RX_BIAS", "MCLK";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_6_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF4_PB>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9335 AIF1_CAP>;
+		};
+	};
+};
+
+&venus {
+	firmware-name = "qcom/msm8996/scorpio/venus.mbn";
+};
+
+&rpm_requests {
+	regulators-0 {
+		vreg_l3a_0p875: l3 {
+			regulator-name = "vreg_l3a_0p875";
+			regulator-min-microvolt = <850000>;
+			regulator-max-microvolt = <1300000>;
+		};
+		vreg_l11a_1p1: l11 {
+			regulator-name = "vreg_l11a_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+		vreg_l17a_2p8: l17 {
+			regulator-name = "vreg_l17a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l18a_2p8: l18 {
+			regulator-name = "vreg_l18a_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		vreg_l22a_3p0: l22 {
+			regulator-name = "vreg_l22a_3p0";
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <3500000>;
+		};
+		vreg_l29a_2p7: l29 {
+			regulator-name = "vreg_l29a_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+	};
+};
+
+&vdd_gfx {
+	regulator-max-microvolt = <1065000>;
+};
+
+&pm8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"VOL_UP_N",		/* GPIO_2  */
+		"SPKR_ID",		/* GPIO_3  */
+		"PWM_HAPTICS",		/* GPIO_4  */
+		"INFARED_DRV",		/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"KEYPAD_LED_EN_A",	/* GPIO_7  */
+		"WL_EN",		/* GPIO_8  */
+		"3P3_ENABLE",		/* GPIO_9  */
+		"KEYPAD_LED_EN_B",	/* GPIO_10 */
+		"FP_ID",		/* GPIO_11 */
+		"NC",			/* GPIO_12 */
+		"NC",			/* GPIO_13 */
+		"NC",			/* GPIO_14 */
+		"DIVCLK1_CDC",		/* GPIO_15 */
+		"DIVCLK2_HAPTICS",	/* GPIO_16 */
+		"NC",			/* GPIO_17 */
+		"32KHz_CLK_IN",		/* GPIO_18 */
+		"BT_EN",		/* GPIO_19 */
+		"PMIC_SLB",		/* GPIO_20 */
+		"UIM_BATT_ALARM",	/* GPIO_21 */
+		"NC";			/* GPIO_22 */
+
+	keypad_default: keypad-default-state {
+		pins = "gpio7", "gpio10";
+		function = PMIC_GPIO_FUNC_FUNC1;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <PM8994_GPIO_S4>;
+		bias-disable;
+	};
+};
+
+&pm8994_mpps {
+	gpio-line-names =
+		"VREF_SDC_UIM_APC",	/* MPP_1 */
+		"NC",			/* MPP_2 */
+		"VREF_DACX",		/* MPP_3 */
+		"NC",			/* MPP_4 */
+		"NC",			/* MPP_5 */
+		"STAT_SMB1351",		/* MPP_6 */
+		"NC",			/* MPP_7 */
+		"NC";			/* MPP_8 */
+};
+
+&pmi8994_gpios {
+	gpio-line-names =
+		"NC",			/* GPIO_1  */
+		"SPKR_PA_RST",		/* GPIO_2  */
+		"NC",			/* GPIO_3  */
+		"NC",			/* GPIO_4  */
+		"NC",			/* GPIO_5  */
+		"NC",			/* GPIO_6  */
+		"NC",			/* GPIO_7  */
+		"NC",			/* GPIO_8  */
+		"NC",			/* GPIO_9  */
+		"NC";			/* GPIO_10 */
+};
+
+&tlmm {
+	gpio-line-names =
+		"ESE_SPI_MOSI",		/* GPIO_0   */
+		"ESE_SPI_MISO",		/* GPIO_1   */
+		"NC",			/* GPIO_2   */
+		"ESE_SPI_CLK",		/* GPIO_3   */
+		"MSM_UART_TX",		/* GPIO_4   */
+		"MSM_UART_RX",		/* GPIO_5   */
+		"NFC_I2C_SDA",		/* GPIO_6   */
+		"NFC_I2C_SCL",		/* GPIO_7   */
+		"OLED_RESET_N",		/* GPIO_8   */
+		"NFC_IRQ",		/* GPIO_9   */
+		"OLED_TE",		/* GPIO_10  */
+		"OLED_ID_DET1",		/* GPIO_11  */
+		"NFC_DISABLE",		/* GPIO_12  */
+		"CAM_MCLK0",		/* GPIO_13  */
+		"OLED_ID_DET2",		/* GPIO_14  */
+		"CAM_MCLK2",		/* GPIO_15  */
+		"ESE_PWR_REQ",		/* GPIO_16  */
+		"CCI_I2C_SDA0",		/* GPIO_17  */
+		"CCI_I2C_SCL0",		/* GPIO_18  */
+		"CCI_I2C_SDA1",		/* GPIO_19  */
+		"CCI_I2C_SCL1",		/* GPIO_20  */
+		"NFC_DWL_REQ",		/* GPIO_21  */
+		"CCI_TIMER1",		/* GPIO_22  */
+		"WEBCAM1_RESET_N",	/* GPIO_23  */
+		"ESE_IRQ",		/* GPIO_24  */
+		"NC",			/* GPIO_25  */
+		"WEBCAM1_STANDBY",	/* GPIO_26  */
+		"NC",			/* GPIO_27  */
+		"NC",			/* GPIO_28  */
+		"OLED_ERR_FG",		/* GPIO_29  */
+		"CAM1_RST_N",		/* GPIO_30  */
+		"HIFI_SW_MUTE",		/* GPIO_31  */
+		"NC",			/* GPIO_32  */
+		"NC",			/* GPIO_33  */
+		"FP_DOME_SW",		/* GPIO_34  */
+		"PCI_E0_RST_N",		/* GPIO_35  */
+		"PCI_E0_CLKREQ_N",	/* GPIO_36  */
+		"PCI_E0_WAKE",		/* GPIO_37  */
+		"OV_PWDN",		/* GPIO_38  */
+		"NC",			/* GPIO_39  */
+		"VDDR_1P6_EN",		/* GPIO_40  */
+		"QCA_UART_TXD",		/* GPIO_41  */
+		"QCA_UART_RXD",		/* GPIO_42  */
+		"QCA_UART_CTS",		/* GPIO_43  */
+		"QCA_UART_RTS",		/* GPIO_44  */
+		"MAWC_UART_TX",		/* GPIO_45  */
+		"MAWC_UART_RX",		/* GPIO_46  */
+		"NC",			/* GPIO_47  */
+		"NC",			/* GPIO_48  */
+		"AUDIO_SWITCH_EN",	/* GPIO_49  */
+		"FP_SPI_RST",		/* GPIO_50  */
+		"TYPEC_I2C_SDA",	/* GPIO_51  */
+		"TYPEC_I2C_SCL",	/* GPIO_52  */
+		"CODEC_INT2_N",		/* GPIO_53  */
+		"CODEC_INT1_N",		/* GPIO_54  */
+		"APPS_I2C7_SDA",	/* GPIO_55  */
+		"APPS_I2C7_SCL",	/* GPIO_56  */
+		"FORCE_USB_BOOT",	/* GPIO_57  */
+		"SPKR_I2S_BCK",		/* GPIO_58  */
+		"SPKR_I2S_WS",		/* GPIO_59  */
+		"SPKR_I2S_DOUT",	/* GPIO_60  */
+		"SPKR_I2S_DIN",		/* GPIO_61  */
+		"ESE_RSTN",		/* GPIO_62  */
+		"TYPEC_INT",		/* GPIO_63  */
+		"CODEC_RESET_N",	/* GPIO_64  */
+		"PCM_CLK",		/* GPIO_65  */
+		"PCM_SYNC",		/* GPIO_66  */
+		"PCM_DIN",		/* GPIO_67  */
+		"PCM_DOUT",		/* GPIO_68  */
+		"CDC_44K1_CLK",		/* GPIO_69  */
+		"SLIMBUS_CLK",		/* GPIO_70  */
+		"SLIMBUS_DATA0",	/* GPIO_71  */
+		"SLIMBUS_DATA1",	/* GPIO_72  */
+		"LDO_5V_IN_EN",		/* GPIO_73  */
+		"NC",			/* GPIO_74  */
+		"TSP_RST_N",		/* GPIO_75  */
+		"NC",			/* GPIO_76  */
+		"TOUCHKEY_INT",		/* GPIO_77  */
+		"SPKR_I2S_MCLK",	/* GPIO_78  */
+		"SPKR_PA_INT",		/* GPIO_79  */
+		"SENSOR_RESET_N",	/* GPIO_80  */
+		"FP_SPI_MOSI",		/* GPIO_81  */
+		"FP_SPI_MISO",		/* GPIO_82  */
+		"FP_SPI_CS_N",		/* GPIO_83  */
+		"FP_SPI_CLK",		/* GPIO_84  */
+		"HIFI_SD",		/* GPIO_85  */
+		"CAM_VDD_1P05_EN",	/* GPIO_86  */
+		"MSM_TS_I2C_SDA",	/* GPIO_87  */
+		"MSM_TS_I2C_SCL",	/* GPIO_88  */
+		"NC",			/* GPIO_89  */
+		"ESE_SPI_CS_N",		/* GPIO_90  */
+		"NC",			/* GPIO_91  */
+		"NC",			/* GPIO_92  */
+		"NC",			/* GPIO_93  */
+		"NC",			/* GPIO_94  */
+		"NC",			/* GPIO_95  */
+		"NC",			/* GPIO_96  */
+		"GRFC_0",		/* GPIO_97  */
+		"GRFC_1",		/* GPIO_98  */
+		"NC",			/* GPIO_99  */
+		"GRFC_3",		/* GPIO_100 */
+		"GRFC_4",		/* GPIO_101 */
+		"NC",			/* GPIO_102 */
+		"NC",			/* GPIO_103 */
+		"GRFC_7",		/* GPIO_104 */
+		"UIM2_DATA",		/* GPIO_105 */
+		"UIM2_CLK",		/* GPIO_106 */
+		"UIM2_RESET",		/* GPIO_107 */
+		"UIM2_PRESENT",		/* GPIO_108 */
+		"UIM1_DATA",		/* GPIO_109 */
+		"UIM1_CLK",		/* GPIO_110 */
+		"UIM1_RESET",		/* GPIO_111 */
+		"UIM1_PRESENT",		/* GPIO_112 */
+		"UIM_BATT_ALARM",	/* GPIO_113 */
+		"GRFC_8",		/* GPIO_114 */
+		"GRFC_9",		/* GPIO_115 */
+		"TX_GTR_THRES",		/* GPIO_116 */
+		"ACC_INT",		/* GPIO_117 */
+		"GYRO_INT",		/* GPIO_118 */
+		"COMPASS_INT",		/* GPIO_119 */
+		"PROXIMITY_INT_N",	/* GPIO_120 */
+		"FP_IRQ",		/* GPIO_121 */
+		"TSP_TA",		/* GPIO_122 */
+		"HALL_INTR2",		/* GPIO_123 */
+		"HALL_INTR1",		/* GPIO_124 */
+		"TS_INT_N",		/* GPIO_125 */
+		"NC",			/* GPIO_126 */
+		"GRFC_11",		/* GPIO_127 */
+		"HIFI_PWR_EN",		/* GPIO_128 */
+		"EXT_GPS_LNA_EN",	/* GPIO_129 */
+		"NC",			/* GPIO_130 */
+		"NC",			/* GPIO_131 */
+		"NC",			/* GPIO_132 */
+		"GRFC_14",		/* GPIO_133 */
+		"GSM_TX2_PHASE_D",	/* GPIO_134 */
+		"HIFI_SW_SEL",		/* GPIO_135 */
+		"GRFC_15",		/* GPIO_136 */
+		"RFFE3_DATA",		/* GPIO_137 */
+		"RFFE3_CLK",		/* GPIO_138 */
+		"NC",			/* GPIO_139 */
+		"NC",			/* GPIO_140 */
+		"RFFE5_DATA",		/* GPIO_141 */
+		"RFFE5_CLK",		/* GPIO_142 */
+		"NC",			/* GPIO_143 */
+		"COEX_UART_TX",		/* GPIO_144 */
+		"COEX_UART_RX",		/* GPIO_145 */
+		"RFFE2_DATA",		/* GPIO_146 */
+		"RFFE2_CLK",		/* GPIO_147 */
+		"RFFE1_DATA",		/* GPIO_148 */
+		"RFFE1_CLK";		/* GPIO_149 */
+
+	touchkey_default: touchkey-default-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	touchkey_sleep: touchkey-sleep-state {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touchscreen_default: touchscreen-default-state {
+		pins = "gpio75", "gpio125";
+		function = "gpio";
+		drive-strength = <10>;
+		bias-pull-up;
+	};
+
+	touchscreen_sleep: touchscreen-sleep-state {
+		pins = "gpio75", "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996pro.dtsi b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
new file mode 100644
index 000000000..b74cff06f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996pro.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	/delete-node/ opp-table-cluster0;
+	/delete-node/ opp-table-cluster1;
+
+	/*
+	 * On MSM8996 Pro the cpufreq driver shifts speed bins into the high
+	 * nibble of supported hw, so speed bin 0 becomes 0x10, speed bin 1
+	 * becomes 0x20, speed 2 becomes 0x40.
+	 */
+
+	cluster0_opp: opp-table-cluster0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <441600>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <614400>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <691200>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <768000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <844800>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <979200>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1516800>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+	};
+
+	cluster1_opp: opp-table-cluster1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <192000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <307200>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <384000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <441600>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <441600>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <537600>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <614400>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <691200>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <768000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <844800>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <902400>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <979200>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1056000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1132800>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1190400>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1286400>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1363200>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1440000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1516800>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1593600>;
+		};
+	};
+};
+
+&gpu_opp_table {
+	/*
+	 * Unlike CPU opp tables, the GPU driver does not shift speed bins.
+	 *
+	 * 652.8 Mhz is available on speed bin 0 only.
+	 * 624 Mhz and 560 Mhz are available on speed bins 0 and 1.
+	 * All the rest are available on all bins of the hardware (like on
+	 * plain 8996).
+	 */
+
+	opp-652800000 {
+		opp-hz = /bits/ 64 <652800000>;
+		opp-supported-hw = <0x01>;
+	};
+	opp-624000000 {
+		opp-hz = /bits/ 64 <624000000>;
+		opp-supported-hw = <0x03>;
+	};
+	opp-560000000 {
+		opp-hz = /bits/ 64 <560000000>;
+		opp-supported-hw = <0x03>;
+	};
+	/* The rest is inherited from msm8996 */
+};
+
+&cbf {
+	compatible = "qcom,msm8996pro-cbf";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
new file mode 100644
index 000000000..102f3e9a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "Asus NovaGo TP370QL";
+	compatible = "asus,novago-tp370ql", "qcom,msm8998";
+	chassis-type = "convertible";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <123 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <37 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
new file mode 100644
index 000000000..3b7172aa4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/*
+ * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630,
+ * Asus NovaGo TP370QL, and HP Envy x2.  All three devices are basically the
+ * same, with differences in peripherals.
+ */
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+
+/ {
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+/*
+ * The laptop FW does not appear to support the retention state as it is
+ * not advertised as enabled in ACPI, and enabling it in DT can cause boot
+ * hangs.
+ */
+&CPU0 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU1 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU2 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU3 {
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
+};
+
+&CPU4 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU5 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU6 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+&CPU7 {
+	cpu-idle-states = <&BIG_CPU_SLEEP_1>;
+};
+
+/*
+ * If EFIFB is used, enabling MMCC will cause important MMSS clocks to be cleaned
+ * up, because as far as Linux is concerned - they are unused. Disable it by default
+ * on clamshell devices, as it will break them, unless either simplefb is configured to
+ * hold a vote for these clocks, or panels are brought up properly, using drm/msm.
+ */
+&mmcc {
+	status = "disabled";
+};
+
+&mmss_smmu {
+	status = "disabled";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vph_pwr>;
+		vdd_l10_l23_l25-supply = <&vph_pwr>;
+		vdd_l13_l19_l21-supply = <&vph_pwr>;
+		vdd_l16_l28-supply = <&vph_pwr>;
+		vdd_l18_l22-supply = <&vph_pwr>;
+		vdd_l20_l24-supply = <&vph_pwr>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&remoteproc_mss {
+	status = "okay";
+};
+
+&sdhc2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	touchpad: touchpad-pin-state {
+		pins = "gpio123";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&ufshc {
+	status = "okay";
+};
+
+&ufsphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host"; /* Force to host until we have Type-C hooked up */
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
new file mode 100644
index 000000000..b6a214bea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "F(x)tec Pro1 (QX1000)";
+	compatible = "fxtec,pro1", "qcom,msm8998";
+	chassis-type = "handset";
+	qcom,board-id = <0x02000b 0x10>;
+
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-hall-sensors {
+		compatible = "gpio-keys";
+		label = "Hall sensors";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor1_default>;
+
+		event-hall-sensor1 {
+			label = "Keyboard Hall Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <15>;
+			wakeup-source;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+		};
+	};
+
+	gpio-kb-extra-keys {
+		compatible = "gpio-keys";
+		label = "Keyboard extra keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_kb_pins_extra>;
+
+		key-home {
+			label = "Home";
+			gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOMEPAGE>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-super-l {
+			label = "Super Left";
+			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_FN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-super-r {
+			label = "Super Right";
+			gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_FN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-shift {
+			label = "Shift";
+			gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHTSHIFT>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-ctrl {
+			label = "Ctrl";
+			gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFTCTRL>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+
+		key-alt {
+			label = "Alt";
+			gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFTALT>;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Side buttons";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
+			    <&cam_snapshot_pin_a>;
+		button-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		button-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+
+	keyboard-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			default-state = "off";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+			label = "white:kbd_backlight";
+			retain-state-suspended;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_CAPSLOCK;
+			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			label = "yellow:capslock";
+			linux,default-trigger = "kbd-capslock";
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2000000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f6400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6400000 0x0 0x2000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			console-size = <0x60000>;
+			ecc-size = <16>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			record-size = <0x10000>;
+		};
+	};
+
+	ts_vio_vreg: ts-vio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vio_reg";
+		startup-delay-us = <2>;
+		enable-active-high;
+		gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_vio_default>;
+		regulator-always-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt9286";
+		reg = <0x14>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+		AVDD28-supply = <&vreg_l28_3p0>;
+		VDDIO-supply = <&ts_vio_vreg>;
+		pinctrl-names = "active";
+		pinctrl-0 = <&ts_rst_n>, <&ts_int_n>;
+	};
+};
+
+&etf {
+	status = "okay";
+};
+
+&etm1 {
+	status = "okay";
+};
+
+&etm2 {
+	status = "okay";
+};
+
+&etm3 {
+	status = "okay";
+};
+
+&etm4 {
+	status = "okay";
+};
+
+&etm5 {
+	status = "okay";
+};
+
+&etm6 {
+	status = "okay";
+};
+
+&etm7 {
+	status = "okay";
+};
+
+&etm8 {
+	status = "okay";
+};
+
+&etr {
+	status = "okay";
+};
+
+&funnel1 {
+	status = "okay";
+};
+
+&funnel2 {
+	status = "okay";
+};
+
+&funnel3 {
+	status = "okay";
+};
+
+&funnel4 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&funnel5 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	cam_focus_pin_a: cam-focus-btn-active-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	cam_snapshot_pin_a: cam-snapshot-btn-active-state {
+		pins = "gpio8";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_mss {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	mdp_vsync_n: mdp-vsync-n-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	gpio_kb_pins_extra: gpio-kb-pins-extra-state {
+		pins = "gpio21", "gpio32", "gpio33", "gpio114",
+		       "gpio128", "gpio129";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	ts_vio_default: ts-vio-def-state {
+		pins = "gpio81";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_rst_n: ts-rst-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	hall_sensor1_default: hall-sensor1-def-state {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_int_n: ts-int-n-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <8>;
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+	status = "okay";
+};
+
+&ufshc {
+	status = "okay";
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+/* GT9286 analog supply */
+&vreg_l28_3p0 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
new file mode 100644
index 000000000..38389c6a3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "HP Envy x2";
+	compatible = "hp,envy-x2", "qcom,msm8998";
+	chassis-type = "convertible";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
new file mode 100644
index 000000000..a105143be
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+	model = "Lenovo Miix 630";
+	compatible = "lenovo,miix-630", "qcom,msm8998";
+	chassis-type = "convertible";
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchpad>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <121 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&remoteproc_mss {
+	firmware-name = "qcom/msm8998/LENOVO/81F1/qcdsp1v28998.mbn",
+			"qcom/msm8998/LENOVO/81F1/qcdsp28998.mbn";
+};
+
+&sdhc2 {
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
new file mode 100644
index 000000000..4319f4da8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -0,0 +1,449 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
+	compatible = "qcom,msm8998-mtp", "qcom,msm8998";
+	chassis-type = "handset";
+
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 45 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&etf {
+	status = "okay";
+};
+
+&etm1 {
+	status = "okay";
+};
+
+&etm2 {
+	status = "okay";
+};
+
+&etm3 {
+	status = "okay";
+};
+
+&etm4 {
+	status = "okay";
+};
+
+&etm5 {
+	status = "okay";
+};
+
+&etm6 {
+	status = "okay";
+};
+
+&etm7 {
+	status = "okay";
+};
+
+&etm8 {
+	status = "okay";
+};
+
+&etr {
+	status = "okay";
+};
+
+&funnel1 {
+	status = "okay";
+};
+
+&funnel2 {
+	status = "okay";
+};
+
+&funnel3 {
+	status = "okay";
+};
+
+&funnel4 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&funnel5 {
+	/* FIXME: Figure out why clock late_initcall crashes the board with this enabled. */
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&replicator1 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_mss {
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&stm {
+	status = "okay";
+};
+
+&ufshc {
+	status = "okay";
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "host"; /* Force to host until we have Type-C hooked up */
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
new file mode 100644
index 000000000..fac8b3510
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * OnePlus 5 (cheeseburger) device tree
+ *
+ * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+#include "msm8998-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 5";
+	compatible = "oneplus,cheeseburger", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <8 0 16859 23>;
+
+	/* Capacitive keypad button backlight */
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_backlight_default>;
+
+		led-keypad-backlight {
+			gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			default-state = "off";
+		};
+	};
+};
+
+&pmi8998_gpios {
+	button_backlight_default: button-backlight-state {
+		pins = "gpio5";
+		function = "normal";
+		bias-pull-down;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
new file mode 100644
index 000000000..68e634f82
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * OnePlus 5(T) (cheeseburger / dumpling) common device tree source based on msm8998-mtp.dtsi
+ *
+ * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	/* Required for bootloader to select correct board */
+	qcom,msm-id = <292 0x20001>; /* 8998 v2.1 */
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use display framebuffer setup by the UEFI XBL bootloader for simplefb */
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			* That's a lot of clocks, but it's necessary due
+			* to unused clk cleanup & no panel driver yet..
+			*/
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>,
+				 <&mmcc MDSS_BYTE0_CLK>,
+				 <&mmcc MDSS_BYTE0_INTF_CLK>,
+				 <&mmcc MDSS_PCLK0_CLK>,
+				 <&mmcc MDSS_ESC0_CLK>;
+			power-domains = <&mmcc MDSS_GDSC>;
+		};
+	};
+
+	reserved-memory {
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* For getting crash logs using Android downstream kernels */
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xac000000 0x0 0x200000>;
+			console-size = <0x80000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x8000>;
+			ftrace-size = <0x20000>;
+		};
+
+		/*
+		 * The following memory regions on downstream are "dynamically allocated"
+		 * but given the same addresses every time. Hard code them as these addresses
+		 * are where the OnePlus signed firmware expects them to be.
+		 */
+		ipa_fws_region: ipa@f6800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6800000 0x0 0x5000>;
+			no-map;
+		};
+		zap_shader_region: gpu@f6900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6900000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume buttons";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_keys_default>;
+
+		button-vol-down {
+			label = "Volume down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+
+		button-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_default>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * OnePlus' ADSP firmware requires 30 MiB in total, so increase the adsp_mem
+ * region by 4 MiB to account for this while relocating the other now
+ * conflicting memory nodes accordingly.
+ */
+&adsp_mem {
+	reg = <0x0 0x8b200000 0x0 0x1e00000>;
+};
+&mpss_mem {
+	reg = <0x0 0x8d000000 0x0 0x7000000>;
+};
+&venus_mem {
+	reg = <0x0 0x94000000 0x0 0x500000>;
+};
+&mba_mem {
+	reg = <0x0 0x94500000 0x0 0x200000>;
+};
+&slpi_mem {
+	reg = <0x0 0x94700000 0x0 0xf00000>;
+};
+&ipa_fw_mem {
+	reg = <0x0 0x95600000 0x0 0x10000>;
+};
+&ipa_gsi_mem {
+	reg = <0x0 0x95610000 0x0 0x5000>;
+};
+&gpu_mem {
+	reg = <0x0 0x95615000 0x0 0x100000>;
+};
+&wlan_msa_mem {
+	reg = <0x0 0x95715000 0x0 0x100000>;
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		vdd-supply = <&vreg_l28_3p0>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <20>;
+		syna,startup-delay-ms = <20>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4_f12: rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <20>;
+			syna,sensor-type = <1>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <122>;
+		};
+	};
+};
+
+&blsp1_i2c6 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 46 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	/* VDD_GFX supply */
+	pm8005_s1: s1 {
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	vol_keys_default: vol-keys-state {
+		pins = "gpio5", "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <1808000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p88: l14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	nfc_int_active: nfc-int-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_active: nfc-enable-active-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+};
+
+&ufshc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufsphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+};
+
+&usb3 {
+	status = "okay";
+
+	/* Disable USB3 clock requirement as the device only supports USB2 */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb3_dwc3 {
+	/* Drop the unused USB 3 PHY */
+	phys = <&qusb2phy>;
+	phy-names = "usb2-phy";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Force to peripheral until we can switch modes */
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	/* Leave disabled until MSS is functional */
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts
new file mode 100644
index 000000000..5d0dabbae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * OnePlus 5T (dumpling) device tree
+ *
+ * Copyright (c) 2021, Jami Kettunen <jamipkettunen@gmail.com>
+ */
+
+#include "msm8998-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 5T";
+	compatible = "oneplus,dumpling", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <8 0 17801 43>;
+};
+
+/* Update the screen height values from 1920 to 2160 on the 5T */
+&framebuffer0 {
+	height = <2160>;
+};
+
+/* Adjust digitizer area height to match the 5T's taller panel */
+&rmi4_f12 {
+	touchscreen-y-mm = <137>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
new file mode 100644
index 000000000..fcaefc1b1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ1 Compact";
+	compatible = "sony,xperia-lilac", "qcom,msm8998";
+	chassis-type = "handset";
+};
+
+&ibb {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5500000>;
+	qcom,soft-start-us = <800>;
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vreg_lvs1a_1p8 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
new file mode 100644
index 000000000..055b6a643
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ Premium";
+	compatible = "sony,xperia-maple", "qcom,msm8998";
+	chassis-type = "handset";
+
+	disp_dvdd_vreg: disp-dvdd-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "disp_dvdd_en";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&pmi8998_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&four_k_disp_dcdc_en>;
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5800000>;
+	regulator-max-microvolt = <5800000>;
+	qcom,soft-start-us = <200>;
+};
+
+&pm8005_gpios {
+	gpio-line-names = "EAR_EN", /* GPIO_1 */
+			  "NC",
+			  "SLB",
+			  "OPTION_1_PM8005";
+};
+
+&pmi8998_gpios {
+	gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "TYPEC_UUSB_SEL",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "DISPLAY_TYPE_SEL",
+			  "USB_SWITCH_SEL",
+			  "NC",
+			  "4K_DISP_DCDC_EN", /* GPIO_10 */
+			  "NC",
+			  "DIV_CLK3",
+			  "SPMI_I2C_SEL",
+			  "NC";
+
+	four_k_disp_dcdc_en: 4k-disp-dcdc-en-state {
+		pins = "gpio10";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		output-high;
+		power-source = <0>;
+		qcom,drive-strength = <1>;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "", /* GPIO_0 */
+			  "",
+			  "",
+			  "",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "MAIN_CAM_PWR_EN",
+			  "TOF_INT_N",
+			  "NC",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "TOF_RESET_N",
+			  "CAM2_RSTN",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "UIM2_DETECT_EN",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "TRAY2_DET_DS",
+			  "CODEC_RST_N",
+			  "WSA_L_EN",
+			  "WSA_R_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+			  "LPASS_SLIMBUS_DATA0",
+			  "LPASS_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_80 */
+			  "SW_SERVICE",
+			  "TX_GTR_THRES_IN",
+			  "HW_ID0",
+			  "HW_ID1",
+			  "NC",
+			  "NC",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NFC_IRQ",
+			  "NFC_DWLD_EN",
+			  "DISP_RESET_N",
+			  "TRAY2_DET",
+			  "CAM_SOF",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1", /* GPIO_100 */
+			  "GRFC4",
+			  "NC",
+			  "NC",
+			  "RSVD",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RST",
+			  "UIM1_PRESENT",
+			  "UIM_BATT_ALARM",
+			  "RSVD",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT_N",
+			  "NC",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "NC",
+			  "NC",
+			  "USB_DETECT_EN",
+			  "NC",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "NC",
+			  "TS_VDDIO_EN",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
+
+&vreg_l22a_2p85 {
+	regulator-min-microvolt = <2704000>;
+	regulator-max-microvolt = <2704000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
new file mode 100644
index 000000000..c21333aa7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "msm8998-sony-xperia-yoshino.dtsi"
+
+/ {
+	model = "Sony Xperia XZ1";
+	compatible = "sony,xperia-poplar", "qcom,msm8998";
+	chassis-type = "handset";
+};
+
+&ibb {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+};
+
+&lab {
+	regulator-min-microvolt = <5600000>;
+	regulator-max-microvolt = <5600000>;
+	qcom,soft-start-us = <800>;
+};
+
+&vreg_l18a_2p85 {
+	/* Note: Round-down from 2850000 to be a multiple of PLDO step-size 8000 */
+	regulator-min-microvolt = <2848000>;
+	regulator-max-microvolt = <2848000>;
+};
+
+&vreg_l22a_2p85 {
+	/* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+	regulator-min-microvolt = <2696000>;
+	regulator-max-microvolt = <2696000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
new file mode 100644
index 000000000..876c6921d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -0,0 +1,930 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
+	qcom,board-id = <8 0>;
+
+	clocks {
+		div1_mclk: divclk1 {
+			compatible = "gpio-gate-clock";
+			pinctrl-0 = <&div_clk1>;
+			pinctrl-names = "default";
+			clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+			#clock-cells = <0>;
+			enable-gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	board_vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	cam0_vdig_vreg: cam0-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "cam0_vdig";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_cam_pwr_en>;
+	};
+
+	cam1_vdig_vreg: cam1-vdig {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1_vdig";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&chat_cam_pwr_en>;
+		vin-supply = <&vreg_s3a_1p35>;
+	};
+
+	cam_vio_vreg: cam-vio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vio_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&pmi8998_gpios 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_cam_pwr_io_en>;
+		vin-supply = <&vreg_lvs1a_1p8>;
+	};
+
+	touch_vddio_vreg: touch-vddio-vreg {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_vddio_vreg";
+		startup-delay-us = <10000>;
+		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_vddio_en>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		vbus-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc_dir_default &usb_detect_en>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Side buttons";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_n &focus_n &snapshot_n>;
+		button-vol-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		button-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 8 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall sensors";
+		pinctrl-names = "default";
+		pinctrl-0 = <&acc_cover_open>;
+
+		event-hall-sensor0 {
+			label = "Cover Hall Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			debounce-interval = <30>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x3700000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f6400000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf6400000 0x0 0x2000>;
+			no-map;
+		};
+
+		adsp_region: memory@fe000000 {
+			reg = <0x0 0xfe000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_region: memory@fe800000 {
+			reg = <0x0 0xfe800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&pmi8998_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vib_ldo_en>;
+	};
+};
+
+&blsp1_i2c5 {
+	status = "okay";
+	clock-frequency = <355000>;
+
+	touchscreen@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_n>;
+
+		vdd-supply = <&vreg_l28_3p0>;
+		vio-supply = <&touch_vddio_vreg>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <1000>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	bias-disable;
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+
+		clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&blsp2_i2c2 {
+	status = "okay";
+
+	proximity@29 {
+		compatible = "st,vl53l0x";
+		reg = <0x29>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&cam_vio_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tof_int_n &tof_reset>;
+	};
+};
+
+&ibb {
+	regulator-min-microamp = <800000>;
+	regulator-max-microamp = <800000>;
+	regulator-enable-ramp-delay = <200>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-ramp-delay = <1>;
+	regulator-settling-time-up-us = <600>;
+	regulator-settling-time-down-us = <1000>;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+	regulator-min-microamp = <200000>;
+	regulator-max-microamp = <200000>;
+	regulator-enable-ramp-delay = <500>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-ramp-delay = <1>;
+	regulator-settling-time-up-us = <50000>;
+	regulator-settling-time-down-us = <3000>;
+	regulator-soft-start;
+};
+
+&pm8005_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "SLB",
+			  "OPTION_1_PM8005";
+};
+
+&pm8005_regulators {
+	/* VDD_GFX supply */
+	pm8005_s1: s1 {
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1088000>;
+		regulator-enable-ramp-delay = <500>;
+		/* Hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
+			  "NC",
+			  "WLAN_SW_CTRL (DISALLOWED)",
+			  "SSC_PWR_EN",
+			  "VOL_DOWN_N",
+			  "VOL_UP_N",
+			  "SNAPSHOT_N",
+			  "FOCUS_N",
+			  "FLASH_THERM",
+			  "", /* GPIO_10 */
+			  "",
+			  "",
+			  "DIV_CLK1",
+			  "NC",
+			  "NC (DISALLOWED)",
+			  "DIV_CLK3",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC (DISALLOWED)", /* GPIO_20 */
+			  "NFC_CLK_REQ",
+			  "NC (DISALLOWED)",
+			  "WCSS_PWR_REQ",
+			  "OPTION_1 (DISALLOWED)",
+			  "OPTION_2 (DISALLOWED)",
+			  "PM_SLB (DISALLOWED)";
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio8";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	div_clk1: div-clk1-state {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
+};
+
+&pmi8998_gpios {
+	gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "TYPEC_UUSB_SEL",
+			  "VIB_LDO_EN",
+			  "NC",
+			  "DISPLAY_TYPE_SEL",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DIV_CLK3",
+			  "SPMI_I2C_SEL",
+			  "NC";
+
+	main_cam_pwr_io_en: main-cam-pwr-io-en-state {
+		pins = "gpio1";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-disable;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		power-source = <1>;
+	};
+
+	vib_ldo_en: vib-ldo-en-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-disable;
+		drive-push-pull;
+		output-low;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		power-source = <0>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qusb2phy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2032000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-system-load = <73400>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-system-load = <12560>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l14a_1p85: l14 {
+			regulator-min-microvolt = <1848000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-system-load = <32000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p85: l18 { };
+
+		vreg_l19a_2p7: l19 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 { };
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc2 {
+	status = "okay";
+	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on &sdc2_cd>;
+	pinctrl-1 = <&sdc2_off &sdc2_cd>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+	gpio-line-names = "", /* GPIO_0 */
+			  "",
+			  "",
+			  "",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "MDP_VSYNC_P", /* GPIO_10 */
+			  "RGBC_IR_INT",
+			  "NFC_VEN",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "NC",
+			  "NC",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "MAIN_CAM_PWR_EN",
+			  "TOF_INT_N",
+			  "NC",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "TOF_RESET_N",
+			  "CAM2_RSTN",
+			  "NC",
+			  "CAM1_RSTN", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "CC_DIR",
+			  "UIM2_DETECT_EN",
+			  "FP_RESET_N", /* GPIO_40 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "NC",
+			  "CODEC_INT2_N",
+			  "CODEC_INT1_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "TRAY2_DET_DS",
+			  "CODEC_RST_N",
+			  "WSA_L_EN",
+			  "WSA_R_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+			  "LPASS_SLIMBUS_DATA0",
+			  "LPASS_SLIMBUS_DATA1",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_80 */
+			  "SW_SERVICE",
+			  "TX_GTR_THRES_IN",
+			  "HW_ID0",
+			  "HW_ID1",
+			  "NC",
+			  "NC",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NFC_IRQ",
+			  "NFC_DWLD_EN",
+			  "DISP_RESET_N",
+			  "TRAY2_DET",
+			  "CAM_SOF",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "DEBUG_GPIO0",
+			  "DEBUG_GPIO1", /* GPIO_100 */
+			  "GRFC4",
+			  "NC",
+			  "NC",
+			  "RSVD",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RST",
+			  "UIM1_PRESENT",
+			  "UIM_BATT_ALARM",
+			  "RSVD",
+			  "NC",
+			  "NC",
+			  "ACCEL_INT",
+			  "GYRO_INT",
+			  "COMPASS_INT",
+			  "ALS_PROX_INT_N", /* GPIO_120 */
+			  "FP_INT_N",
+			  "NC",
+			  "BAROMETER_INT",
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "NC",
+			  "NC",
+			  "USB_DETECT_EN",
+			  "NC",
+			  "QLINK_REQUEST", /* GPIO_130 */
+			  "QLINK_ENABLE",
+			  "NC",
+			  "NC",
+			  "WMSS_RESET_N",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK", /* GPIO_140 */
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD",
+			  "RFFE2_DATA",
+			  "RFFE2_CLK",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+
+	mdp_vsync_p: mdp-vsync-p-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_ven: nfc-ven-state {
+		pins = "gpio12";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	cam_mclk0_active: cam-mclk0-active-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_mclk1_active: cam-mclk1-active-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cci0_default: cci0-default-state {
+		pins = "gpio18", "gpio19";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cci1_default: cci1-default-state {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	main_cam_pwr_en: main-cam-pwr-en-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	tof_int_n: tof-int-n-state {
+		pins = "gpio22";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	chat_cam_pwr_en: chat-cam-pwr-en-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	tof_reset: tof-reset-state {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cc_dir_default: cc-dir-active-state {
+		pins = "gpio38";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <16>;
+	};
+
+	acc_cover_open: acc-cover-open-state {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_int_n: ts-int-n-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	usb_detect_en: usb-detect-en-active-state {
+		pins = "gpio128";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	ts_vddio_en: ts-vddio-en-default-state {
+		pins = "gpio133";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+};
+
+/*
+ * WARNING:
+ * Disable UFS until card quirks are in to avoid unrecoverable hard-brick
+ * that would happen as soon as the UFS card gets probed as, without the
+ * required quirks, the bootloader will be erased right after card probe.
+ */
+&ufshc {
+	status = "disabled";
+};
+
+&ufsphy {
+	status = "disabled";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Force to peripheral until we have Type-C hooked up */
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
+
+&usb3phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
new file mode 100644
index 000000000..437b30cc8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-xiaomi-sagit.dts
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Xiaomi Mi 6 (sagit) device tree source based on msm8998-mtp.dtsi
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Degdag Mohamed <degdagmohamed@gmail.com>
+ * Copyright (c) 2022, Dzmitry Sankouski <dsankouski@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "msm8998.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/*
+ * Delete following upstream (msm8998.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	model = "Xiaomi Mi 6";
+	compatible = "xiaomi,sagit", "qcom,msm8998";
+	chassis-type = "handset";
+	/* Required for bootloader to select correct board */
+	qcom,board-id = <30 0>;
+
+	reserved-memory {
+		/*
+		 * Xiaomi's ADSP firmware requires 30 MiB in total, so increase the adsp_mem
+		 * region by 4 MiB to account for this while relocating the other now
+		 * conflicting memory nodes accordingly.
+		 */
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8d000000 {
+			reg = <0x0 0x8d000000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@94000000 {
+			reg = <0x0 0x94000000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94500000 {
+			reg = <0x0 0x94500000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94700000 {
+			reg = <0x0 0x94700000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95610000 {
+			reg = <0x0 0x95610000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95615000 {
+			reg = <0x0 0x95615000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95715000 {
+			reg = <0x0 0x95715000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* For getting crash logs using Android downstream kernels */
+		ramoops@ac000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xac000000 0x0 0x200000>;
+			console-size = <0x80000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x8000>;
+			ftrace-size = <0x20000>;
+		};
+
+		/*
+		 * The following memory regions on downstream are "dynamically allocated"
+		 * but given the same addresses every time. Hard code them as these addresses
+		 * are where the Xiaomi signed firmware expects them to be.
+		 */
+		ipa_fws_region: memory@f7800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7800000 0x0 0x5000>;
+			no-map;
+		};
+
+		zap_shader_region: memory@f7900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xf7900000 0x0 0x2000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume buttons";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_key_default>;
+
+		key-vol-up {
+			label = "Volume up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			wakeup-source;
+		};
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_sensor_default_state>;
+
+		event-hall-sensor {
+			label = "Hall Effect Sensor";
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	disp_vddts_vreg: disp-vddts-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "disp-vddts-regulator";
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c5 {
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ts_active_state>;
+		pinctrl-1 = <&ts_int_suspend_state &ts_reset_suspend_state>;
+
+		vdd-supply = <&disp_vddts_vreg>;
+		vio-supply = <&vreg_l6a_1p8>;
+
+		syna,reset-delay-ms = <20>;
+		syna,startup-delay-ms = <20>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <64>;
+			touchscreen-y-mm = <114>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <20>;
+		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+		};
+	};
+};
+
+&blsp1_i2c5_sleep {
+	/delete-property/ bias-pull-up;
+	bias-disable;
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_uart3_on {
+	rx-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-up on 46 (RX). This is needed to
+		 * avoid garbage data when the TX pin of the Bluetooth
+		 * module is in tri-state (module powered off or not
+		 * driving the signal yet).
+		 */
+		bias-pull-up;
+	};
+
+	cts-pins {
+		/delete-property/ bias-disable;
+		/*
+		 * Configure a pull-down on 47 (CTS) to match the pull
+		 * of the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+};
+
+&blsp2_uart1 {
+	status = "okay";
+};
+
+&pm8005_regulators {
+	compatible = "qcom,pm8005-regulators";
+
+	vdd_s1-supply = <&vph_pwr>;
+
+	pm8005_s1: s1 { /* VDD_GFX supply */
+		regulator-min-microvolt = <524000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-enable-ramp-delay = <500>;
+
+		/* hack until we rig up the gpu consumer */
+		regulator-always-on;
+	};
+};
+
+&pm8998_gpios {
+	vol_up_key_default: vol-up-key-default-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-pull-up;
+		input-enable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+
+	audio_mclk_pin: audio-mclk-pin-active-state {
+		pins = "gpio13";
+		function = "func2";
+		power-source = <0>;
+	};
+};
+
+&qusb2phy {
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8998-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_s8-supply = <&vph_pwr>;
+		vdd_s9-supply = <&vph_pwr>;
+		vdd_s10-supply = <&vph_pwr>;
+		vdd_s11-supply = <&vph_pwr>;
+		vdd_s12-supply = <&vph_pwr>;
+		vdd_s13-supply = <&vph_pwr>;
+		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+		vdd_l6-supply = <&vreg_s5a_2p04>;
+		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+		vdd_l9-supply = <&vreg_bob>;
+		vdd_l10_l23_l25-supply = <&vreg_bob>;
+		vdd_l13_l19_l21-supply = <&vreg_bob>;
+		vdd_l16_l28-supply = <&vreg_bob>;
+		vdd_l18_l22-supply = <&vreg_bob>;
+		vdd_l20_l24-supply = <&vreg_bob>;
+		vdd_l26-supply = <&vreg_s3a_1p35>;
+		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: s3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s4a_1p8: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_s5a_2p04: s5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: s7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: l1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l2a_1p2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_0p8: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6a_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l7a_1p8: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l8a_1p2: l8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l11a_1p0: l11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l13a_2p95: l13 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a_2p7: l18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+		};
+
+		vreg_l19a_3p0: l19 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_l20a_2p95: l20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l21a_2p95: l21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-system-load = <800000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l22a_2p85: l22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <2864000>;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l24a_3p075: l24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l25a_3p3: l25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+		};
+
+		vreg_l26a_1p2: l26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l28_3p0: l28 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 { };
+
+		vreg_lvs2a_1p8: lvs2 { };
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmi8998-regulators";
+
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	cci1_default_state: cci1-default-state {
+		pins = "gpio19", "gpio20";
+		function = "cci_i2c";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cdc_reset_n_state: cdc-reset-n-state {
+		pins = "gpio64";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+		output-high;
+	};
+
+	hall_sensor_default_state: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss_dsi_active_state: mdss-dsi-active-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	mdss_dsi_suspend_state: mdss-dsi-suspend-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_active_state: mdss-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_te_suspend_state: mdss-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync_a";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk0_active_state: msm-mclk0-active-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk0_suspend_state: msm-mclk0-suspend-state {
+		pins = "gpio13";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	msm_mclk1_active_state: msm-mclk1-active-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	msm_mclk1_suspend_state: msm-mclk1-suspend-state {
+		pins = "gpio14";
+		function = "cam_mclk";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	nfc_int_active_state: nfc-int-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_int_suspend_state: nfc-int-suspend-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_active_state: nfc-enable-active-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-pull-up;
+	};
+
+	nfc_enable_suspend_state: nfc-enable-suspend-state {
+		pins = "gpio12", "gpio116";
+		function = "gpio";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	ts_active_state: ts-active-state {
+		pins = "gpio89", "gpio125";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	ts_int_suspend_state: ts-int-suspend-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_reset_suspend_state: ts-reset-suspend-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_int_n_state: wcd-int-n-state {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	wsa_leftspk_pwr_n_state: wsa-leftspk-pwr-n-state {
+		pins = "gpio65";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	wsa_rightspk_pwr_n_state: wsa-rightspk-pwr-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&ufshc {
+	vcc-supply = <&vreg_l20a_2p95>;
+	vccq-supply = <&vreg_l26a_1p2>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vcc-max-microamp = <750000>;
+	vccq-max-microamp = <560000>;
+	vccq2-max-microamp = <750000>;
+	status = "okay";
+};
+
+&ufsphy {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l2a_1p2>;
+	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+};
+
+&usb3 {
+	/* Disable USB3 clock requirement as the device only supports USB2 */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	/* Drop the unused USB 3 PHY */
+	phys = <&qusb2phy>;
+	phy-names = "usb2-phy";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Force to peripheral until we can switch modes */
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
new file mode 100644
index 000000000..f180047ca
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -0,0 +1,3193 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+#include <dt-bindings/clock/qcom,gpucc-msm8998.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	qcom,msm-id = <292 0x0>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x100000>;
+			no-map;
+		};
+
+		smem_mem: smem-mem@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x2d00000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@88f00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x88f00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		spss_mem: memory@8ab00000 {
+			reg = <0x0 0x8ab00000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8cc00000 {
+			reg = <0x0 0x8cc00000 0x0 0x7000000>;
+			no-map;
+		};
+
+		venus_mem: memory@93c00000 {
+			reg = <0x0 0x93c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		mba_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@94300000 {
+			reg = <0x0 0x94300000 0x0 0xf00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@95200000 {
+			reg = <0x0 0x95200000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@95210000 {
+			reg = <0x0 0x95210000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@95600000 {
+			reg = <0x0 0x95600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@95700000 {
+			reg = <0x0 0x95700000 0x0 0x100000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+
+	clocks {
+		xo: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo280";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1536>;
+			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-retention";
+				/* CPU Retention (C2D), L2 Active */
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <81>;
+				exit-latency-us = <86>;
+				min-residency-us = <504>;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <814>;
+				exit-latency-us = <4562>;
+				min-residency-us = <9183>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-retention";
+				/* CPU Retention (C2D), L2 Active */
+				arm,psci-suspend-param = <0x00000002>;
+				entry-latency-us = <79>;
+				exit-latency-us = <82>;
+				min-residency-us = <1302>;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				/* CPU + L2 Power Collapse (C3, D4) */
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <724>;
+				exit-latency-us = <2027>;
+				min-residency-us = <9419>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-312500000 {
+			opp-hz = /bits/ 64 <312500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8998";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
+					clocks = <&xo>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8998-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_plus: opp10 {
+							opp-level = <RPM_SMD_LEVEL_BINNING>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 26>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		clust0-mhm-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_mhm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		clust1-mhm-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_mhm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster1-l2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cluster1_l2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		multimedia-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				multimedia_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-msm8998";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0xb0000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+
+			/*
+			 * The hypervisor typically configures the memory region where these clocks
+			 * reside as read-only for the HLOS. If the HLOS tried to enable or disable
+			 * these clocks on a device with such configuration (e.g. because they are
+			 * enabled but unused during boot-up), the device will most likely decide
+			 * to reboot.
+			 * In light of that, we are conservative here and we list all such clocks
+			 * as protected. The board dts (or a user-supplied dts) can override the
+			 * list of protected clocks if it differs from the norm, and it is in fact
+			 * desired for the HLOS to manage these clocks
+			 */
+			protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
+					   <SSC_XO>,
+					   <SSC_CNOC_AHBS_CLK>;
+		};
+
+		rpm_msg_ram: sram@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@784000 {
+			compatible = "qcom,msm8998-qfprom", "qcom,qfprom";
+			reg = <0x00784000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@23a {
+				reg = <0x23a 0x1>;
+				bits = <0 4>;
+			};
+		};
+
+		tsens0: thermal@10ab000 {
+			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+			reg = <0x010ab000 0x1000>, /* TM */
+			      <0x010aa000 0x1000>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal@10ae000 {
+			compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+			      <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		anoc1_smmu: iommu@1680000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x01680000 0x10000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 462 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996";
+			reg = <0x01c00000 0x2000>,
+			      <0x1b000000 0xf1d>,
+			      <0x1b000f20 0xa8>,
+			      <0x1b100000 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			num-lanes = <1>;
+			phys = <&pciephy>;
+			phy-names = "pciephy";
+			status = "disabled";
+
+			ranges = <0x01000000 0x0 0x00000000 0x1b200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
+
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 135 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 136 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 138 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 139 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+			clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+			iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
+			perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+		};
+
+		pcie_phy: phy@1c06000 {
+			compatible = "qcom,msm8998-qmp-pcie-phy";
+			reg = <0x01c06000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			vdda-phy-supply = <&vreg_l1a_0p875>;
+			vdda-pll-supply = <&vreg_l2a_1p2>;
+
+			pciephy: phy@1c06800 {
+				reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "pcie_0_pipe_clk_src";
+				#clock-cells = <0>;
+			};
+		};
+
+		ufshc: ufshc@1da4000 {
+			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x01da4000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufsphy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			power-domains = <&gcc UFS_GDSC>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_AXI_CLK>,
+				<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
+				<&gcc GCC_UFS_AHB_CLK>,
+				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+				<&rpmcc RPM_SMD_LN_BB_CLK1>,
+				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			resets = <&gcc GCC_UFS_BCR>;
+			reset-names = "rst";
+		};
+
+		ufsphy: phy@1da7000 {
+			compatible = "qcom,msm8998-qmp-ufs-phy";
+			reg = <0x01da7000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges;
+
+			clock-names =
+				"ref",
+				"ref_aux";
+			clocks =
+				<&gcc GCC_UFS_CLKREF_CLK>,
+				<&gcc GCC_UFS_PHY_AUX_CLK>;
+
+			reset-names = "ufsphy";
+			resets = <&ufshc 0>;
+
+			ufsphy_lanes: phy@1da7400 {
+				reg = <0x01da7400 0x128>,
+				      <0x01da7600 0x1fc>,
+				      <0x01da7c00 0x1dc>,
+				      <0x01da7800 0x128>,
+				      <0x01da7a00 0x1fc>;
+				#phy-cells = <0>;
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,msm8998-tcsr", "syscon";
+			reg = <0x01f60000 0x20000>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,msm8998-pinctrl";
+			reg = <0x03400000 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 150>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc2_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_cd: sdc2-cd-state {
+				pins = "gpio95";
+				function = "gpio";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			blsp1_uart3_on: blsp1-uart3-on-state {
+				tx-pins {
+					pins = "gpio45";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio46";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cts-pins {
+					pins = "gpio47";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rfr-pins {
+					pins = "gpio48";
+					function = "blsp_uart3_a";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio32", "gpio33";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
+				pins = "gpio32", "gpio33";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio47", "gpio48";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c5_default: blsp1-i2c5-default-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
+				pins = "gpio87", "gpio88";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
+				pins = "gpio43", "gpio44";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio43", "gpio44";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp1_spi_b_default: blsp1-spi-b-default-state {
+				pins = "gpio23", "gpio28";
+				function = "blsp1_spi_b";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_spi1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi2_default: blsp1-spi2-default-state {
+				pins = "gpio31", "gpio34", "gpio32", "gpio33";
+				function = "blsp_spi2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "blsp_spi2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi4_default: blsp1-spi4-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "blsp_spi4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi5_default: blsp1-spi5-default-state {
+				pins = "gpio85", "gpio86", "gpio87", "gpio88";
+				function = "blsp_spi5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp1_spi6_default: blsp1-spi6-default-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "blsp_spi6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+
+			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio55", "gpio56";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio55", "gpio56";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c3_default: blsp2-i2c3-default-state {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
+				pins = "gpio51", "gpio52";
+				function = "blsp_i2c9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
+				pins = "gpio67", "gpio68";
+				function = "blsp_i2c10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
+				pins = "gpio67", "gpio68";
+				function = "blsp_i2c10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
+				pins = "gpio60", "gpio61";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
+				pins = "gpio60", "gpio61";
+				function = "blsp_i2c11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
+				pins = "gpio83", "gpio84";
+				function = "blsp_i2c12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_spi1_default: blsp2-spi1-default-state {
+				pins = "gpio53", "gpio54", "gpio55", "gpio56";
+				function = "blsp_spi7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "blsp_spi8";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi3_default: blsp2-spi3-default-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "blsp_spi9";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi4_default: blsp2-spi4-default-state {
+				pins = "gpio65", "gpio66", "gpio67", "gpio68";
+				function = "blsp_spi10";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi5_default: blsp2-spi5-default-state {
+				pins = "gpio58", "gpio59", "gpio60", "gpio61";
+				function = "blsp_spi11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			blsp2_spi6_default: blsp2-spi6-default-state {
+				pins = "gpio81", "gpio82", "gpio83", "gpio84";
+				function = "blsp_spi12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		remoteproc_mss: remoteproc@4080000 {
+			compatible = "qcom,msm8998-mss-pil";
+			reg = <0x04080000 0x100>, <0x04180000 0x20>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_QDSS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "qdss", "xo";
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&gcc GCC_MSS_RESTART>;
+			reset-names = "mss_restart";
+
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+			power-domains = <&rpmpd MSM8998_VDDCX>,
+					<&rpmpd MSM8998_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_mem>;
+			};
+
+			mpss {
+				memory-region = <&mpss_mem>;
+			};
+
+			metadata {
+				memory-region = <&mdata_mem>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 15>;
+			};
+		};
+
+		adreno_gpu: gpu@5000000 {
+			compatible = "qcom,adreno-540.1", "qcom,adreno";
+			reg = <0x05000000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gpucc RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_GPU_BIMC_GFX_CLK>,
+				<&gpucc RBCPR_CLK>,
+				<&gpucc GFX3D_CLK>;
+			clock-names = "iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface",
+				"rbcpr",
+				"core";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&rpmpd MSM8998_VDDMX>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+				opp-710000097 {
+					opp-hz = /bits/ 64 <710000097>;
+					opp-level = <RPM_SMD_LEVEL_TURBO>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-670000048 {
+					opp-hz = /bits/ 64 <670000048>;
+					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-596000097 {
+					opp-hz = /bits/ 64 <596000097>;
+					opp-level = <RPM_SMD_LEVEL_NOM>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-515000097 {
+					opp-hz = /bits/ 64 <515000097>;
+					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-414000000 {
+					opp-hz = /bits/ 64 <414000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-342000000 {
+					opp-hz = /bits/ 64 <342000000>;
+					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
+			clock-names = "iface", "mem", "mem_iface";
+
+			#global-interrupts = <0>;
+			#iommu-cells = <1>;
+			interrupts =
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+			/*
+			 * GPU-GX GDSC's parent is GPU-CX. We need to bring up the
+			 * GPU-CX for SMMU but we need both of them up for Adreno.
+			 * Contemporarily, we also need to manage the VDDMX rpmpd
+			 * domain in the Adreno driver.
+			 * Enable GPU CX/GX GDSCs here so that we can manage the
+			 * SoC VDDMX RPM Power Domain in the Adreno driver.
+			 */
+			power-domains = <&gpucc GPU_GX_GDSC>;
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,msm8998-gpucc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK>;
+			clock-names = "xo",
+				      "gpll0";
+		};
+
+		remoteproc_slpi: remoteproc@5800000 {
+			compatible = "qcom,msm8998-slpi-pas";
+			reg = <0x05800000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			px-supply = <&vreg_lvs2a_1p8>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "xo", "aggre2";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_SSCCX>;
+			power-domain-names = "ssc_cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apcs_glb 27>;
+			};
+		};
+
+		stm: stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x06002000 0x1000>,
+			      <0x16280000 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x06041000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel2: funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x06042000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel1_in6: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel3: funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x06045000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator1: replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x06046000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf: etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x06047000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr: etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x06048000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@7840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07840000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@7940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07940000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@7a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07a40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@7b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07b40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		funnel4: funnel@7b60000 { /* APSS Funnel */
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07b60000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint =
+						  <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint =
+						  <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint =
+						  <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint =
+						  <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint =
+						  <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel5: funnel@7b70000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x07b70000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel1_in6>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@7c40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07c40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU4>;
+
+			port {
+				etm4_out: endpoint {
+					remote-endpoint = <&apss_funnel_in4>;
+				};
+			};
+		};
+
+		etm6: etm@7d40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07d40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU5>;
+
+			port {
+				etm5_out: endpoint {
+					remote-endpoint = <&apss_funnel_in5>;
+				};
+			};
+		};
+
+		etm7: etm@7e40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07e40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU6>;
+
+			port {
+				etm6_out: endpoint {
+					remote-endpoint = <&apss_funnel_in6>;
+				};
+			};
+		};
+
+		etm8: etm@7f40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x07f40000 0x1000>;
+			status = "disabled";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU7>;
+
+			port {
+				etm7_out: endpoint {
+					remote-endpoint = <&apss_funnel_in7>;
+				};
+			};
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0800f000 0x1000>,
+			      <0x08400000 0x1000000>,
+			      <0x09400000 0x1000000>,
+			      <0x0a400000 0x220000>,
+			      <0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		usb3: usb@a8f8800 {
+			compatible = "qcom,msm8998-dwc3", "qcom,dwc3";
+			reg = <0x0a8f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE1_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB_30_GDSC>;
+
+			resets = <&gcc GCC_USB_30_BCR>;
+
+			usb3_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a800000 0xcd00>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+			};
+		};
+
+		usb3phy: phy@c010000 {
+			compatible = "qcom,msm8998-qmp-usb3-phy";
+			reg = <0x0c010000 0x18c>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+
+			usb1_ssphy: phy@c010200 {
+				reg = <0xc010200 0x128>,
+				      <0xc010400 0x200>,
+				      <0xc010c00 0x20c>,
+				      <0xc010600 0x128>,
+				      <0xc010800 0x200>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		qusb2phy: phy@c012000 {
+			compatible = "qcom,msm8998-qusb2-phy";
+			reg = <0x0c012000 0x2a8>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2_hstx_trim>;
+		};
+
+		sdhc2: mmc@c0a4900 {
+			compatible = "qcom,msm8998-sdhci", "qcom,sdhci-msm-v4";
+			reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clock-names = "iface", "core", "xo";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x25000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart3: serial@c171000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c171000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart3_on>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			pinctrl-1 = <&blsp1_i2c1_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c5: i2c@c179000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c179000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c5_default>;
+			pinctrl-1 = <&blsp1_i2c5_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_i2c6: i2c@c17a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c17a000 0x600>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi1: spi@c175000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi1_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi2: spi@c176000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi2_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi3: spi@c177000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi3_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi4: spi@c178000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi4_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi5: spi@c179000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c179000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi5_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp1_spi6: spi@c17a000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c17a000 0x600>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi6_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_dma: dma-controller@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x25000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1b0000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		blsp2_i2c1: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c2: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c2_default>;
+			pinctrl-1 = <&blsp2_i2c2_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c3: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c3_default>;
+			pinctrl-1 = <&blsp2_i2c3_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c4: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c4_default>;
+			pinctrl-1 = <&blsp2_i2c4_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c5: i2c@c1b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b9000 0x600>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c5_default>;
+			pinctrl-1 = <&blsp2_i2c5_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_i2c6: i2c@c1ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1ba000 0x600>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_i2c6_default>;
+			pinctrl-1 = <&blsp2_i2c6_sleep>;
+			clock-frequency = <400000>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi1: spi@c1b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi1_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi2: spi@c1b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi2_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi3: spi@c1b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi3_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi4: spi@c1b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi4_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi5: spi@c1b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1b9000 0x600>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP5_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi5_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		blsp2_spi6: spi@c1ba000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x0c1ba000 0x600>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi6_default>;
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmcc: clock-controller@c8c0000 {
+			compatible = "qcom,mmcc-msm8998";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xc8c0000 0x40000>;
+
+			clock-names = "xo",
+				      "gpll0",
+				      "dsi0dsi",
+				      "dsi0byte",
+				      "dsi1dsi",
+				      "dsi1byte",
+				      "hdmipll",
+				      "dplink",
+				      "dpvco",
+				      "gpll0_div";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_MMSS_GPLL0_CLK>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_MMSS_GPLL0_DIV_CLK>;
+		};
+
+		mdss: display-subsystem@c900000 {
+			compatible = "qcom,msm8998-mdss";
+			reg = <0x0c900000 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+			iommus = <&mmss_smmu 0>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@c901000 {
+				compatible = "qcom,msm8998-dpu";
+				reg = <0x0c901000 0x8f000>,
+				      <0x0c9a8e00 0xf0>,
+				      <0x0c9b0000 0x2008>,
+				      <0x0c9b8000 0x1040>;
+				reg-names = "mdp",
+					    "regdma",
+					    "vbif",
+					    "vbif_nrt";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "mnoc",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDMX>;
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-171430000 {
+						opp-hz = /bits/ 64 <171430000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@c994000 {
+				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@c994400 {
+				compatible = "qcom,dsi-phy-10nm-8998";
+				reg = <0x0c994400 0x200>,
+				      <0x0c994600 0x280>,
+				      <0x0c994a00 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@c996000 {
+				compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0c996000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&mmcc MDSS_BYTE1_CLK>,
+					 <&mmcc MDSS_BYTE1_INTF_CLK>,
+					 <&mmcc MDSS_PCLK1_CLK>,
+					 <&mmcc MDSS_ESC1_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+						  <&mmcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd MSM8998_VDDCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@c996400 {
+				compatible = "qcom,dsi-phy-10nm-8998";
+				reg = <0x0c996400 0x200>,
+				      <0x0c996600 0x280>,
+				      <0x0c996a00 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+			#iommu-cells = <1>;
+
+			clocks = <&mmcc MNOC_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AXI_CLK>;
+			clock-names = "iface-mm",
+				      "iface-smmu",
+				      "bus-smmu";
+
+			#global-interrupts = <0>;
+			interrupts =
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&mmcc BIMC_SMMU_GDSC>;
+		};
+
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,msm8998-adsp-pas";
+			reg = <0x17300000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			power-domains = <&rpmpd MSM8998_VDDCX>;
+			power-domain-names = "cx";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 9>;
+			};
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,msm8998-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17921000 0x1000>,
+				      <0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,       /* GICD */
+			      <0x17b00000 0x100000>;      /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0x18800000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+			clock-names = "cxo_ref_clk_pin";
+			interrupts =
+				<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&anoc2_smmu 0x1900>,
+				 <&anoc2_smmu 0x1901>;
+			qcom,snoc-host-cap-8bit-quirk;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi
new file mode 100644
index 000000000..5f1d15db5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			pm2250_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+				bias-pull-up;
+			};
+
+			pm2250_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm2250_gpios: gpio@c000 {
+			compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm2250_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm2250", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
new file mode 100644
index 000000000..99369a0cd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6125-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6125_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6125_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				linux,code = <KEY_POWER>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6125_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6125_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6125_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,pre-scaling = <1 3>;
+				label = "vcoin";
+			};
+
+			channel@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "xo_therm";
+			};
+		};
+
+		pm6125_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pm6125_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		pm6125_gpios: gpio@c000 {
+			compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6125_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6125", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
new file mode 100644
index 000000000..7d4d1f276
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm6150_thermal: pm6150-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6150_temp>;
+
+			trips {
+				pm6150_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm6150_crit: crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm6150_lsid0: pmic@0 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm6150_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm6150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm6150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm6150_gpios: gpio@c000 {
+			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150_lsid1: pmic@1 {
+		compatible = "qcom,pm6150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
new file mode 100644
index 000000000..d13a1ab7c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6150l-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm6150l_lsid4: pmic@4 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6150l_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+		};
+
+		pm6150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm6150l_gpios: gpio@c000 {
+			compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6150l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm6150l_lsid5: pmic@5 {
+		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6150l_flash: led-controller@d300 {
+			compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pm6150l_wled: leds@d800 {
+			compatible = "qcom,pm6150l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm6350.dtsi b/arch/arm64/boot/dts/qcom/pm6350.dtsi
new file mode 100644
index 000000000..3a2a841e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm6350.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm6350-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6350_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm6350", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm6350_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm6350_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm6350_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm6350_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm6350_gpios: gpio@c000 {
+			compatible = "qcom,pm6350-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm6350_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm6350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 000000000..98dc04962
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm660-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm660_temp>;
+
+			trips {
+				pm660_alert0: pm660-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm660_crit: pm660-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
+		};
+
+		pm660_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm660_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm660_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@4c {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "xo_therm";
+			};
+
+			channel@4d {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "msm_therm";
+			};
+
+			channel@4e {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "emmc_therm";
+			};
+
+			channel@4f {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pa_therm0";
+			};
+
+			channel@50 {
+				reg = <ADC5_AMUX_THM4_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "pa_therm1";
+			};
+
+			channel@51 {
+				reg = <ADC5_AMUX_THM5_100K_PU>;
+				qcom,pre-scaling = <1 1>;
+				qcom,decimation = <1024>;
+				qcom,hw-settle-time = <200>;
+				qcom,ratiometric;
+				label = "quiet_therm";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@85 {
+				reg = <ADC5_VCOIN>;
+				qcom,decimation = <1024>;
+				qcom,pre-scaling = <1 3>;
+				label = "vcoin";
+			};
+		};
+
+		pm660_gpios: gpio@c000 {
+			compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660_gpios 0 0 13>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660_spmi_regulators: regulators {
+			compatible = "qcom,pm660-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 000000000..6fdbf507c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm660l-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm660l_temp>;
+
+			trips {
+				pm660l_alert0: pm660l-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm660l_crit: pm660l-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm660l_gpios: gpio@c000 {
+			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_lpg: pwm {
+			compatible = "qcom,pm660l-lpg";
+
+			status = "disabled";
+		};
+
+		pm660l_wled: leds@d800 {
+			compatible = "qcom,pm660l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+
+		pm660l_spmi_regulators: regulators {
+			compatible = "qcom,pm660l-regulators";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
new file mode 100644
index 000000000..e8540c36b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2022 Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm7250b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm7250b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7250b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm7250b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7250b_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@2 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@7 {
+				reg = <ADC5_USB_IN_I>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_in_i_uv";
+			};
+
+			channel@8 {
+				reg = <ADC5_USB_IN_V_16>;
+				qcom,pre-scaling = <1 16>;
+				label = "usb_in_v_div_16";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+
+			channel@e {
+				reg = <ADC5_AMUX_THM2>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "smb1390_therm";
+			};
+
+			channel@1e {
+				reg = <ADC5_MID_CHG_DIV6>;
+				qcom,pre-scaling = <1 6>;
+				label = "chg_mid";
+			};
+
+			channel@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@84 {
+				reg = <ADC5_VBAT_SNS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vbat_sns";
+			};
+
+			channel@99 {
+				reg = <ADC5_SBUx>;
+				qcom,pre-scaling = <1 3>;
+				label = "chg_sbux";
+			};
+		};
+
+		pm7250b_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm7250b_gpios: pinctrl@c000 {
+			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm7250b_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm7325.dtsi b/arch/arm64/boot/dts/qcom/pm7325.dtsi
new file mode 100644
index 000000000..d1c5476af
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7325.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm7325: pmic@1 {
+		compatible = "qcom,pm7325", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7325_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7325_gpios: gpio@8800 {
+			compatible = "qcom,pm7325-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm7325_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+&thermal_zones {
+	pm7325_thermal: pm7325-thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <0>;
+		thermal-sensors = <&pm7325_temp_alarm>;
+
+		trips {
+			pm7325_trip0: trip0 {
+				temperature = <95000>;
+				hysteresis = <0>;
+				type = "passive";
+			};
+
+			pm7325_crit: pm7325-crit {
+				temperature = <115000>;
+				hysteresis = <0>;
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm7550ba.dtsi b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
new file mode 100644
index 000000000..8b00ece98
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm7550ba.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm7550ba-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm7550ba_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm7550ba: pmic@7 {
+		compatible = "qcom,pm7550ba", "qcom,spmi-pmic";
+		reg = <7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm7550ba_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm7550ba_gpios: gpio@8800 {
+			compatible = "qcom,pm7550ba-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm7550ba_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm7550ba_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm7550ba-eusb2-repeater", "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
new file mode 100644
index 000000000..532b79acf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pm8004_lsid4: pmic@4 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pm8004_lsid5: pmic@5 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8004_spmi_regulators: regulators {
+			compatible = "qcom,pm8004-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
new file mode 100644
index 000000000..0f0ab2da8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	pm8005_lsid0: pmic@4 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8005_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8005_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pm8005_lsid1: pmic@5 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8005_regulators: regulators {
+			compatible = "qcom,pm8005-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
new file mode 100644
index 000000000..0c2c424be
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@a {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8009_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+		};
+
+		pm8009_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8009_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@b {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
new file mode 100644
index 000000000..0ea641e12
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8010-m-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8010_m_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8010-n-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8010_n_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8010_m: pmic@c {
+		compatible = "qcom,pm8010", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8010_m_temp_alarm: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	pm8010_n: pmic@d {
+		compatible = "qcom,pm8010", "qcom,spmi-pmic";
+		reg = <0xd SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8010_n_temp_alarm: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
new file mode 100644
index 000000000..3ba3ba5d8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+	thermal-zones {
+		pm8150-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8150_0: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+
+				status = "disabled";
+			};
+		};
+
+		pm8150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pm8150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8150_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8150_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
new file mode 100644
index 000000000..2b9123df5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8150b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pm8150b_vbus: usb-vbus-regulator@1100 {
+			compatible = "qcom,pm8150b-vbus-reg";
+			status = "disabled";
+			reg = <0x1100>;
+		};
+
+		pm8150b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150b_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pm8150b_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm8150b_gpios: gpio@c000 {
+			compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8150b_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8150b_lpg: pwm {
+			compatible = "qcom,pm8150b-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
new file mode 100644
index 000000000..b1686e577
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8150l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@4 {
+		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pm8150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pm8150l_gpios: gpio@c000 {
+			compatible = "qcom,pm8150l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8150l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8150l_flash: led-controller@d300 {
+			compatible = "qcom,pm8150l-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pm8150l_lpg: pwm {
+			compatible = "qcom,pm8150l-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
new file mode 100644
index 000000000..9ed9ba23e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8350_thermal: pm8350-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8350_temp_alarm>;
+
+			trips {
+				pm8350_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm8350_crit: pm8350c-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8350: pmic@1 {
+		compatible = "qcom,pm8350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8350_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8350_gpios: gpio@8800 {
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8350_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
new file mode 100644
index 000000000..05c105898
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8350b_thermal: pm8350b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8350b_temp_alarm>;
+
+			trips {
+				pm8350b_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm8350b_crit: pm8350c-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8350b: pmic@3 {
+		compatible = "qcom,pm8350b", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8350b_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8350b_gpios: gpio@8800 {
+			compatible = "qcom,pm8350b-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8350b_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
new file mode 100644
index 000000000..f28e71487
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8350c: pmic@2 {
+		compatible = "qcom,pm8350c", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8350c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8350c_gpios: gpio@8800 {
+			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8350c_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8350c_pwm: pwm {
+			compatible = "qcom,pm8350c-pwm";
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+	};
+};
+
+/ {
+	thermal-zones {
+		pm8350c_thermal: pm8350c-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8350c_temp_alarm>;
+
+			trips {
+				pm8350c_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pm8350c_crit: pm8350c-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi
new file mode 100644
index 000000000..ae5bce3cf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8450-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8450_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8450: pmic@7 {
+		compatible = "qcom,pm8450", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8450_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8450_gpios: gpio@8800 {
+			compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8450_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
new file mode 100644
index 000000000..db3d5c17a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550: pmic@1 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550_gpios: gpio@8800 {
+			compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8550_flash: led-controller@ee00 {
+			compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led";
+			reg = <0xee00>;
+			status = "disabled";
+		};
+
+		pm8550_pwm: pwm {
+			compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
new file mode 100644
index 000000000..72609f31c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550b_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550b: pmic@7 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550b_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550b_gpios: gpio@8800 {
+			compatible = "qcom,pm8550b-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550b_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8550b_eusb2_repeater: phy@fd00 {
+			compatible = "qcom,pm8550b-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
new file mode 100644
index 000000000..c47646a46
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550ve-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550ve_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550ve: pmic@5 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550ve_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550ve_gpios: gpio@8800 {
+			compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550ve_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
new file mode 100644
index 000000000..97b1c18aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8550vs-c-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_c_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-d-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_d_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-e-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_e_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pm8550vs-g-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8550vs_g_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pm8550vs_c: pmic@2 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_c_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_c_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_c_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550vs_d: pmic@3 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_d_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_d_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_d_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550vs_e: pmic@4 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_e_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_e_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_e_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8550vs_g: pmic@6 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8550vs_g_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8550vs_g_gpios: gpio@8800 {
+			compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pm8550vs_g_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
new file mode 100644
index 000000000..223442f90
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pm8916_0: pmic@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8916_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+
+			watchdog {
+				compatible = "qcom,pm8916-wdt";
+				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+				timeout-sec = <60>;
+			};
+		};
+
+		pm8916_usbin: usb-detect@1300 {
+			compatible = "qcom,pm8941-misc";
+			reg = <0x1300>;
+			interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "usb_vbus";
+			status = "disabled";
+		};
+
+		pm8916_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8916_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 10>;
+			};
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+			};
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8916_mpps: mpps@a000 {
+			compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8916_mpps 0 0 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8916_gpios: gpio@c000 {
+			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8916_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pm8916_1: pmic@1 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8916_pwm: pwm {
+			compatible = "qcom,pm8916-pwm";
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8916_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
+
+		pm8916_codec: audio-codec@f000 {
+			compatible = "qcom,pm8916-wcd-analog-codec";
+			reg = <0xf000>;
+			reg-names = "pmic-codec-core";
+			clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+			clock-names = "mclk";
+			interrupt-parent = <&spmi_bus>;
+			interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+				     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+				     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+			interrupt-names = "cdc_spk_cnp_int",
+					  "cdc_spk_clip_int",
+					  "cdc_spk_ocp_int",
+					  "mbhc_ins_rem_det1",
+					  "mbhc_but_rel_det",
+					  "mbhc_but_press_det",
+					  "mbhc_ins_rem_det",
+					  "mbhc_switch_int",
+					  "cdc_ear_ocp_int",
+					  "cdc_hphr_ocp_int",
+					  "cdc_hphl_ocp_det",
+					  "cdc_ear_cnp_int",
+					  "cdc_hphr_cnp_int",
+					  "cdc_hphl_cnp_int";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
new file mode 100644
index 000000000..f03095779
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pm8950_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8950_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@5 {
+				reg = <VADC_VCOIN>;
+				qcom,pre-scaling = <1 1>;
+				label = "vcoin";
+			};
+
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 1>;
+				label = "vph_pwr";
+			};
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_625mv";
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_1250mv";
+			};
+
+			channel@c {
+				reg = <VADC_SPARE1>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_buf_625mv";
+			};
+
+			channel@e {
+				reg = <VADC_GND_REF>;
+				label = "ref_gnd";
+			};
+
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+				label = "ref_vdd";
+			};
+
+			channel@11 {
+				reg = <VADC_P_MUX2_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "pa_therm1";
+			};
+
+			channel@13 {
+				reg = <VADC_P_MUX4_1_1>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "case_therm";
+			};
+
+			channel@32 {
+				reg = <VADC_LR_MUX3_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "xo_therm";
+			};
+
+			channel@36 {
+				reg = <VADC_LR_MUX7_HW_ID>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "pa_therm0";
+			};
+
+			channel@3c {
+				reg = <VADC_LR_MUX3_BUF_XO_THERM>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				label = "xo_therm_buf";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pm8950_mpps: mpps@a000 {
+			compatible = "qcom,pm8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8950_gpios: gpio@c000 {
+			compatible = "qcom,pm8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8950_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8950", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8950_spmi_regulators: regulators {
+			compatible = "qcom,pm8950-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
new file mode 100644
index 000000000..1067e141b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8953-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8953_temp>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8953", "qcom,spmi-pmic";
+		reg = <0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8953_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8953_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8953_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8953_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8953_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x00 0x31 0x00 0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+			};
+			channel@c {
+				reg = <VADC_SPARE1>;
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8953_gpios: gpio@c000 {
+			compatible = "qcom,pm8953-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8953_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8953", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
new file mode 100644
index 000000000..d44a95caf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8994-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm8994_temp>;
+
+			trips {
+				pm8994_alert0: pm8994-alert0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm8994_crit: pm8994-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8994_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8994_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8994_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8994_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8994_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@7 {
+				reg = <VADC_VSYS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+			channel@8 {
+				reg = <VADC_DIE_TEMP>;
+				label = "die_temp";
+			};
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				label = "ref_625mv";
+			};
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				label = "ref_1250mv";
+			};
+			channel@e {
+				reg = <VADC_GND_REF>;
+			};
+			channel@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8994_gpios: gpio@c000 {
+			compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8994_gpios 0 0 22>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8994_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8994_lpg: pwm {
+			compatible = "qcom,pm8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pm8994_spmi_regulators: regulators {
+			compatible = "qcom,pm8994-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
new file mode 100644
index 000000000..3f8271539
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pm8998-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pm8998_temp>;
+
+			trips {
+				pm8998_alert0: pm8998-alert0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pm8998_crit: pm8998-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pm8998_lsid0: pmic@0 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8998_pon: pon@800 {
+			compatible = "qcom,pm8998-pon";
+
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pm8998_pwrkey: pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8998_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		pm8998_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8998_coincell: charger@2800 {
+			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
+			reg = <0x2800>;
+
+			status = "disabled";
+		};
+
+		pm8998_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
+		};
+
+		pm8998_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm-hc";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8998_gpios: gpio@c000 {
+			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm8998_gpios 0 0 26>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+	};
+
+	pm8998_lsid1: pmic@1 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi b/arch/arm64/boot/dts/qcom/pmi632.dtsi
new file mode 100644
index 000000000..4eb79e0ce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi632.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2023 Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmi632-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmi632_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmi632_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@7 {
+				reg = <ADC5_USB_IN_I>;
+				qcom,pre-scaling = <1 1>;
+				label = "usb_in_i_uv";
+			};
+
+			channel@8 {
+				reg = <ADC5_USB_IN_V_16>;
+				qcom,pre-scaling = <1 16>;
+				label = "usb_in_v_div_16";
+			};
+
+			channel@9 {
+				reg = <ADC5_CHG_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+
+			channel@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
+			channel@83 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@84 {
+				reg = <ADC5_VBAT_SNS>;
+				qcom,pre-scaling = <1 3>;
+				label = "vbat_sns";
+			};
+		};
+
+		pmi632_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmi632_sdam_7: nvram@b600 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0xb600>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xb600 0x100>;
+		};
+
+		pmi632_gpios: gpio@c000 {
+			compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi632_gpios 0 0 8>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi632", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi632_lpg: pwm {
+			compatible = "qcom,pmi632-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
new file mode 100644
index 000000000..1029f3b1b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019, AngeloGioacchino Del Regno <kholk11@gmail.com>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@2 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_vadc: adc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <VADC_USBIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "usbin";
+			};
+
+			channel@1 {
+				reg = <VADC_DCIN>;
+				qcom,pre-scaling = <1 4>;
+				label = "dcin";
+			};
+
+			channel@2 {
+				reg = <VADC_VCHG_SNS>;
+				qcom,pre-scaling = <1 1>;
+				label = "vchg_sns";
+			};
+
+			channel@9 {
+				reg = <VADC_REF_625MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_625mv";
+			};
+
+			channel@a {
+				reg = <VADC_REF_1250MV>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_1250mv";
+			};
+
+			channel@d {
+				reg = <VADC_SPARE2>;
+				qcom,pre-scaling = <1 1>;
+				label = "chg_temp";
+			};
+		};
+
+		pmi8950_mpps: mpps@a000 {
+			compatible = "qcom,pmi8950-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8950_gpios: gpio@c000 {
+			compatible = "qcom,pmi8950-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8950_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8950", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8950_wled: leds@d800 {
+			compatible = "qcom,pmi8950-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
new file mode 100644
index 000000000..36d6a1fb5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8994_gpios: gpio@c000 {
+			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8994_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8994_mpps: mpps@a000 {
+			compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8994_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8994_lpg: pwm {
+			compatible = "qcom,pmi8994-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pmi8994_spmi_regulators: regulators {
+			compatible = "qcom,pmi8994-regulators";
+		};
+
+		pmi8994_wled: wled@d800 {
+			compatible = "qcom,pmi8994-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			qcom,cabc;
+			qcom,external-pfet;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8996.dtsi b/arch/arm64/boot/dts/qcom/pmi8996.dtsi
new file mode 100644
index 000000000..31b47209e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8996.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+ /*
+  * PMI8996 is a slight modification of PMI8994 with
+  * some notable changes, like being the first PMIC
+  * whose the bootloader has to check to continue booting
+  * and a change to a LABIBB parameter.
+  */
+
+/ {
+	qcom,pmic-id = <0x20009 0x10013 0 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
new file mode 100644
index 000000000..cd3f0790f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmi8998_lsid0: pmic@2 {
+		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmi8998_charger: charger@1000 {
+			compatible = "qcom,pmi8998-charger";
+			reg = <0x1000>;
+
+			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "usb-plugin",
+					  "bat-ov",
+					  "wdog-bark",
+					  "usbin-icl-change";
+
+			io-channels = <&pmi8998_rradc 3>,
+				      <&pmi8998_rradc 4>;
+			io-channel-names = "usbin_i", "usbin_v";
+
+			status = "disabled";
+		};
+
+		pmi8998_gpios: gpio@c000 {
+			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8998_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmi8998_rradc: adc@4500 {
+			compatible = "qcom,pmi8998-rradc";
+			reg = <0x4500>;
+			#io-channel-cells = <1>;
+		};
+	};
+
+	pmi8998_lsid1: pmic@3 {
+		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "sc-err", "ocp";
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-names = "sc-err", "ocp";
+			};
+		};
+
+		pmi8998_lpg: pwm {
+			compatible = "qcom,pmi8998-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+
+		pmi8998_flash: led-controller@d300 {
+			compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
+			reg = <0xd300>;
+			status = "disabled";
+		};
+
+		pmi8998_wled: leds@d800 {
+			compatible = "qcom,pmi8998-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp", "short";
+			label = "backlight";
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
new file mode 100644
index 000000000..1eb740170
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/* (Sadly) this PMIC can be configured to be at different SIDs */
+#ifndef PMK8350_SID
+	#define PMK8350_SID 0
+#endif
+
+/ {
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_reason>;
+		nvmem-cell-names = "reboot-mode";
+		mode-recovery = <0x01>;
+		mode-bootloader = <0x02>;
+	};
+};
+	
+&spmi_bus {
+	pmk8350: pmic@PMK8350_SID {
+		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+		reg = <PMK8350_SID SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8350_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <PMK8350_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <PMK8350_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8350_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <PMK8350_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+		};
+
+		pmk8350_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts = <PMK8350_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8350_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <PMK8350_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			status = "disabled";
+		};
+
+		pmk8350_sdam_2: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+
+		pmk8350_gpios: gpio@b000 {
+			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
+			reg = <0xb000>;
+			gpio-controller;
+			gpio-ranges = <&pmk8350_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
new file mode 100644
index 000000000..c7ac9b2ea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_reason>;
+		nvmem-cell-names = "reboot-mode";
+		mode-recovery = <0x01>;
+		mode-bootloader = <0x02>;
+	};
+};
+
+&spmi_bus {
+	pmk8550: pmic@0 {
+		compatible = "qcom,pm8550", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8550_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				status = "disabled";
+			};
+
+			pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8550_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pmk8550_sdam_2: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+
+		pmk8550_gpios: gpio@8800 {
+			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
+			reg = <0xb800>;
+			gpio-controller;
+			gpio-ranges = <&pmk8550_gpios 0 0 6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
new file mode 100644
index 000000000..dbd4b91df
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+	thermal-zones {
+		pmm8155au-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmm8155au_1_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+		};
+
+		pmm8155au_1_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8155au_1_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmm8155au_1_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmm8155au_1_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+
+			status = "disabled";
+		};
+
+		pmm8155au_1_gpios: gpio@c000 {
+			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm8155au_1_gpios 0 0 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
new file mode 100644
index 000000000..1cee20ac2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_2.dtsi
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmm8155au-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmm8155au_2_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@4 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pmm8155au_2_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8155au_2_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmm8155au_2_gpios: gpio@c000 {
+			compatible = "qcom,pmm8155au-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmm8155au_2_gpios 0 0 10>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
new file mode 100644
index 000000000..0d0a846ac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmp8074_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@2 {
+				reg = <ADC5_VREF_VADC>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_vadc";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "pmic_die";
+			};
+
+			channel@76 {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "xo_therm";
+			};
+
+			channel@77 {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm1";
+			};
+
+			channel@78 {
+				reg = <ADC5_AMUX_THM2_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm2";
+			};
+
+			channel@79 {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm3";
+			};
+
+			channel@131 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+		};
+
+		pmp8074_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			allow-set-time;
+			status = "disabled";
+		};
+
+		pmp8074_gpios: gpio@c000 {
+			compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmp8074_gpios 0 0 12>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmp8074", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+
+		regulators {
+			compatible = "qcom,pmp8074-regulators";
+
+			s3: s3 {
+				regulator-name = "vdd_s3";
+				regulator-min-microvolt = <592000>;
+				regulator-max-microvolt = <1064000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			s4: s4 {
+				regulator-name = "vdd_s4";
+				regulator-min-microvolt = <712000>;
+				regulator-max-microvolt = <992000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			l11: l11 {
+				regulator-name = "l11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
new file mode 100644
index 000000000..febda5077
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmr735a: pmic@4 {
+		compatible = "qcom,pmr735a", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735a_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735a_gpios: gpio@8800 {
+			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735a_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+/ {
+	thermal-zones {
+		pmr735a_thermal: pmr735a-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmr735a_temp_alarm>;
+
+			trips {
+				pmr735a_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmr735a_crit: pmr735a-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
new file mode 100644
index 000000000..f7473e247
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmr735b_thermal: pmr735b-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmr735b_temp_alarm>;
+
+			trips {
+				pmr735b_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmr735b_crit: pmr735a-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmr735b: pmic@5 {
+		compatible = "qcom,pmr735b", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735b_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735b_gpios: gpio@8800 {
+			compatible = "qcom,pmr735b-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735b_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d.dtsi b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
new file mode 100644
index 000000000..41fb664a1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmr735d.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmr735d-k-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_k_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+
+		pmr735d-l-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+
+&spmi_bus {
+	pmr735d_k: pmic@a {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_k_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_k_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_k_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmr735d_l: pmic@b {
+		compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735d_l_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmr735d_l_gpios: gpio@8800 {
+			compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735d_l_gpios 0 0 2>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
new file mode 100644
index 000000000..461ad9703
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	thermal-zones {
+		pms405-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&pms405_temp>;
+
+			trips {
+				pms405_alert0: pms405-alert0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				pms405_crit: pms405-crit {
+					temperature = <125000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pms405_0: pms405@0 {
+		compatible = "qcom,pms405", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pms405_gpios: gpio@c000 {
+			compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pms405_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pon@800 {
+			compatible = "qcom,pms405-pon";
+			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+		};
+
+		pms405_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pms405_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pms405_adc: adc@3100 {
+			compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@131 {
+				reg = <ADC5_VPH_PWR>;
+				qcom,pre-scaling = <1 3>;
+				label = "vph_pwr";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+
+			channel@77 {
+				reg = <ADC5_AMUX_THM1_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm1";
+			};
+
+			channel@79 {
+				reg = <ADC5_AMUX_THM3_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "pa_therm3";
+			};
+
+			channel@76 {
+				reg = <ADC5_XO_THERM_100K_PU>;
+				qcom,ratiometric;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				label = "xo_therm";
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pms405_1: pms405@1 {
+		compatible = "qcom,pms405", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+
+		pms405_spmi_regulators: regulators {
+			compatible = "qcom,pms405-regulators";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmx75.dtsi b/arch/arm64/boot/dts/qcom/pmx75.dtsi
new file mode 100644
index 000000000..373e45f63
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmx75.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmx75-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmx75_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmx75: pmic@1 {
+		compatible = "qcom,pmx75", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmx75_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmx75_gpios: gpio@8800 {
+			compatible = "qcom,pmx75-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmx75_gpios 0 0 16>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
new file mode 100644
index 000000000..d46e591e7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -0,0 +1,1653 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ *
+ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000043>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2118>;
+				min-residency-us = <7376>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <290>;
+				exit-latency-us = <376>;
+				min-residency-us = <1182>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcm2290", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x40000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_SLEEP>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-qcm2290";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,qcm2290-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_min_svs: opp1 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp2 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp4 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp5 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp7 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: sec-apps@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		pil_modem_mem: modem@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: video@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_adsp_mem: adsp@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: ipa-fw@53600000 {
+			reg = <0x0 0x53600000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: ipa-gsi@53610000 {
+			reg = <0x0 0x53610000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: zap@53615000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x53615000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: framebuffer@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: dpfs-data@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: reserved@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b01000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,qcm2290-tlmm";
+			reg = <0x0 0x00500000 0x0 0x300000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 127>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-qcm2290";
+			reg = <0x0 0x01400000 0x0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_hsphy: phy@1613000 {
+			compatible = "qcom,qcm2290-qusb2-phy";
+			reg = <0x0 0x01613000 0x0 0x180>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,qcm2290-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b44000 {
+			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
+			reg = <0x0 0x01b44000 0x0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x01c40000 0x0 0x1100>,
+			      <0x0 0x01e00000 0x0 0x2000000>,
+			      <0x0 0x03e00000 0x0 0x100000>,
+			      <0x0 0x03f00000 0x0 0xa0000>,
+			      <0x0 0x01c0a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x04411000 0x0 0x1ff>,
+			      <0x0 0x04410000 0x0 0x8>;
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rng: rng@4453000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x04453000 0x0 0x1000>;
+			clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x0 0x045f0000 0x0 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x0 0x04690000 0x0 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04744000 0x0 0x1000>,
+			      <0x0 0x04745000 0x0 0x1000>,
+			      <0x0 0x04748000 0x0 0x8000>;
+			reg-names = "hc",
+				    "cqhci",
+				    "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo",
+				      "ice";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			iommus = <&apps_smmu 0xc0 0x0>;
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04784000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0xa0 0x0>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x04a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@4a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@4ef8800 {
+			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
+			reg = <0x0 0x04ef8800 0x0 0x400>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			wakeup-source;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x04e00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+			};
+		};
+
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
+					<&rpmpd QCM2290_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x0c600000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0 0x0c800000 0x0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		watchdog@f017000 {
+			compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
+			reg = <0x0 0x0f017000 0x0 0x1000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sleep_clk>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,qcm2290-apcs-hmss-global";
+			reg = <0x0 0x0f111000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0f120000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x0f121000 0x8000>;
+
+			frame@0 {
+				reg = <0x0 0x1000>,
+				      <0x1000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@2000 {
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@3000 {
+				reg = <0x3000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@4000 {
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@5000 {
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@6000 {
+				reg = <0x6000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@7000 {
+				reg = <0x7000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,
+			      <0x0 0x0f300000 0x0 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0x0 0x0f521000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				mapss_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wlan_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				wlan_crit: wlan-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				mdm0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm0_crit: mdm0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				mdm1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm1_crit: mdm1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		hm-center-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				hm_center_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				hm_center_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				hm_center_crit: hm-center-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
new file mode 100644
index 000000000..fc29b194c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+	compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb",
+		     "qcom,qcs404";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
new file mode 100644
index 000000000..358827c2f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcs404-evb.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
+	compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
+		     "qcom,qcs404";
+};
+
+&ethernet {
+	status = "okay";
+
+	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 10000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_defaults>;
+
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x4>;
+		};
+	};
+};
+
+&tlmm {
+	ethernet_defaults: ethernet-defaults-state {
+		int-pins {
+			pins = "gpio61";
+			function = "rgmii_int";
+			bias-disable;
+			drive-strength = <2>;
+		};
+		mdc-pins {
+			pins = "gpio76";
+			function = "rgmii_mdc";
+			bias-pull-up;
+		};
+		mdio-pins {
+			pins = "gpio75";
+			function = "rgmii_mdio";
+			bias-pull-up;
+		};
+		tx-pins {
+			pins = "gpio67", "gpio66", "gpio65", "gpio64";
+			function = "rgmii_tx";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+		rx-pins {
+			pins = "gpio73", "gpio72", "gpio71", "gpio70";
+			function = "rgmii_rx";
+			bias-disable;
+			drive-strength = <2>;
+		};
+		tx-ctl-pins {
+			pins = "gpio68";
+			function = "rgmii_ctl";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+		rx-ctl-pins {
+			pins = "gpio74";
+			function = "rgmii_ctl";
+			bias-disable;
+			drive-strength = <2>;
+		};
+		tx-ck-pins {
+			pins = "gpio63";
+			function = "rgmii_ck";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+		rx-ck-pins {
+			pins = "gpio69";
+			function = "rgmii_ck";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
new file mode 100644
index 000000000..106554015
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "qcs404.dtsi"
+#include "pms405.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_ch0_3p3:
+	vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "eSMPS3_3P3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	usb3_vbus_reg: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_BOOST_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_vbus_boost_pin>;
+		vin-supply = <&vph_pwr>;
+		enable-active-high;
+
+		/* TODO: Drop this when introducing role switching */
+		regulator-always-on;
+	};
+};
+
+&blsp1_uart3 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&vreg_l6_1p8>;
+		vddxo-supply = <&vreg_l5_1p8>;
+		vddrf-supply = <&vreg_l1_1p3>;
+		vddch0-supply = <&vdd_ch0_3p3>;
+
+		local-bd-address = [ 02 00 00 00 5a ad ];
+
+		max-speed = <3200000>;
+	};
+};
+
+&blsp1_dma {
+	qcom,controlled-remotely;
+};
+
+&blsp2_dma {
+	qcom,controlled-remotely;
+};
+
+&gcc {
+	protected-clocks = <GCC_BIMC_CDSP_CLK>,
+			   <GCC_CDSP_CFG_AHB_CLK>,
+			   <GCC_CDSP_BIMC_CLK_SRC>,
+			   <GCC_CDSP_TBU_CLK>,
+			   <141>, /* GCC_WCSS_Q6_AHB_CLK */
+			   <142>; /* GCC_WCSS_Q6_AXIM_CLK */
+};
+
+&pms405_spmi_regulators {
+	vdd_s3-supply = <&vph_pwr>;
+
+	pms405_s3: s3 {
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vdd_apc";
+		regulator-initial-mode = <1>;
+		regulator-min-microvolt = <1048000>;
+		regulator-max-microvolt = <1384000>;
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&perst_state>;
+};
+
+&pcie_phy {
+	status = "okay";
+
+	vdda-vp-supply = <&vreg_l3_1p05>;
+	vdda-vph-supply = <&vreg_l5_1p8>;
+};
+
+&remoteproc_adsp {
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+};
+
+&remoteproc_wcss {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pms405-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_l1_l2-supply = <&vreg_s5_1p35>;
+		vdd_l3_l8-supply = <&vreg_s5_1p35>;
+		vdd_l4-supply = <&vreg_s5_1p35>;
+		vdd_l5_l6-supply = <&vreg_s4_1p8>;
+		vdd_l7-supply = <&vph_pwr>;
+		vdd_l9-supply = <&vreg_s5_1p35>;
+		vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
+
+		vreg_s4_1p8: s4 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1920000>;
+		};
+
+		vreg_s5_1p35: s5 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1_1p3: l1 {
+			regulator-min-microvolt = <1240000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l2_1p275: l2 {
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		vreg_l3_1p05: l3 {
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1160000>;
+		};
+
+		vreg_l4_1p2: l4 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l5_1p8: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l6_1p8: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_l7_1p8: l7 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		vreg_l8_1p2: l8 {
+			regulator-min-microvolt = <1136000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l10_3p3: l10 {
+			regulator-min-microvolt = <2936000>;
+			regulator-max-microvolt = <3088000>;
+		};
+
+		vreg_l11_sdc2: l11 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l12_3p3: l12 {
+			regulator-min-microvolt = <3050000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l13_3p3: l13 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&sdcc1 {
+	status = "okay";
+
+	supports-cqe;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	non-removable;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+};
+
+&tlmm {
+	perst_state: perst-state {
+		pins = "gpio43";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	usb3_id_pin: usb3-id-state {
+		pins = "gpio116";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&pms405_gpios {
+	usb_vbus_boost_pin: usb-vbus-boost-state {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			output-low;
+			power-source = <1>;
+		};
+	};
+	usb3_vbus_pin: usb3-vbus-state {
+		pinconf {
+			pins = "gpio12";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			input-enable;
+			bias-pull-down;
+			power-source = <1>;
+		};
+	};
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb2_phy_sec {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+
+};
+
+&usb3_dwc3 {
+	dr_mode = "host";
+};
+
+&usb2_phy_prim {
+	vdd-supply = <&vreg_l4_1p2>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	vdda3p3-supply = <&vreg_l12_3p3>;
+	status = "okay";
+};
+
+&usb3_phy {
+	vdd-supply = <&vreg_l3_1p05>;
+	vdda1p8-supply = <&vreg_l5_1p8>;
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
+	vdd-1.8-xo-supply = <&vreg_l5_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l1_1p3>;
+};
+
+/* PINCTRL - additions to nodes defined in qcs404.dtsi */
+
+&blsp1_uart2_default {
+	rx-pins {
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tx-pins {
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&blsp1_uart3_default {
+	cts-pins {
+		bias-disable;
+	};
+
+	rts-tx-pins {
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rx-pins {
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
new file mode 100644
index 000000000..2721f32df
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -0,0 +1,1829 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cpr>;
+			power-domain-names = "cpr";
+		};
+
+		L2_0: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: opp-table-cpr {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			qcom,opp-fuse-level = <1>;
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			qcom,opp-fuse-level = <2>;
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			qcom,opp-fuse-level = <3>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-qcs404", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-qcs404";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,qcs404-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <16>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <32>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <48>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <64>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <128>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <192>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <256>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <320>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <384>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <416>;
+						};
+
+						rpmpd_opp_turbo_plus: opp11 {
+							opp-level = <512>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_apps_mem: memory@85900000 {
+			reg = <0 0x85900000 0 0x500000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		smem_region: memory@85f00000 {
+			reg = <0 0x85f00000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86100000 {
+			reg = <0 0x86100000 0 0x300000>;
+			no-map;
+		};
+
+		wlan_fw_mem: memory@86400000 {
+			reg = <0 0x86400000 0 0x1100000>;
+			no-map;
+		};
+
+		adsp_fw_mem: memory@87500000 {
+			reg = <0 0x87500000 0 0x1a00000>;
+			no-map;
+		};
+
+		cdsp_fw_mem: memory@88f00000 {
+			reg = <0 0x88f00000 0 0x600000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@89500000 {
+			reg = <0 0x89500000 0 0x100000>;
+			no-map;
+		};
+
+		uefi_mem: memory@9f800000 {
+			reg = <0 0x9f800000 0 0x800000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		turingcc: clock-controller@800000 {
+			compatible = "qcom,qcs404-turingcc";
+			reg = <0x00800000 0x30000>;
+			clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x6000>;
+		};
+
+		usb3_phy: phy@78000 {
+			compatible = "qcom,usb-ss-28nm-phy";
+			reg = <0x00078000 0x400>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "ref", "ahb", "pipe";
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "com", "phy";
+			status = "disabled";
+		};
+
+		usb2_phy_prim: phy@7a000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007a000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+				 <&gcc GCC_USB2A_PHY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		usb2_phy_sec: phy@7c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0007c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,qcs404-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cpr_efuse_speedbin: speedbin@13c {
+				reg = <0x13c 0x4>;
+				bits = <2 3>;
+			};
+
+			tsens_s0_p1: s0-p1@1f8 {
+				reg = <0x1f8 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s0_p2: s0-p2@1f8 {
+				reg = <0x1f8 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s1_p1: s1-p1@1f9 {
+				reg = <0x1f9 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s1_p2: s1-p2@1fa {
+				reg = <0x1fa 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s2_p1: s2-p1@1fb {
+				reg = <0x1fb 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s2_p2: s2-p2@1fb {
+				reg = <0x1fb 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s3_p1: s3-p1@1fc {
+				reg = <0x1fc 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s3_p2: s3-p2@1fd {
+				reg = <0x1fd 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s4_p1: s4-p1@1fe {
+				reg = <0x1fe 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s4_p2: s4-p2@1fe {
+				reg = <0x1fe 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s5_p1: s5-p1@200 {
+				reg = <0x200 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@200 {
+				reg = <0x200 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@201 {
+				reg = <0x201 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@202 {
+				reg = <0x202 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@203 {
+				reg = <0x203 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@203 {
+				reg = <0x203 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@204 {
+				reg = <0x204 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@205 {
+				reg = <0x205 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s9_p1: s9-p1@206 {
+				reg = <0x206 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@206 {
+				reg = <0x206 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_mode: mode@208 {
+				reg = <0x208 1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@208 {
+				reg = <0x208 2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@208 {
+				reg = <0x209 2>;
+				bits = <3 8>;
+			};
+
+			cpr_efuse_quot_offset1: qoffset1@231 {
+				reg = <0x231 0x4>;
+				bits = <4 7>;
+			};
+			cpr_efuse_quot_offset2: qoffset2@232 {
+				reg = <0x232 0x4>;
+				bits = <3 7>;
+			};
+			cpr_efuse_quot_offset3: qoffset3@233 {
+				reg = <0x233 0x4>;
+				bits = <2 7>;
+			};
+			cpr_efuse_init_voltage1: ivoltage1@229 {
+				reg = <0x229 0x4>;
+				bits = <4 6>;
+			};
+			cpr_efuse_init_voltage2: ivoltage2@22a {
+				reg = <0x22a 0x4>;
+				bits = <2 6>;
+			};
+			cpr_efuse_init_voltage3: ivoltage3@22b {
+				reg = <0x22b 0x4>;
+				bits = <0 6>;
+			};
+			cpr_efuse_quot1: quot1@22b {
+				reg = <0x22b 0x4>;
+				bits = <6 12>;
+			};
+			cpr_efuse_quot2: quot2@22d {
+				reg = <0x22d 0x4>;
+				bits = <2 12>;
+			};
+			cpr_efuse_quot3: quot3@230 {
+				reg = <0x230 0x4>;
+				bits = <0 12>;
+			};
+			cpr_efuse_ring1: ring1@228 {
+				reg = <0x228 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_ring2: ring2@228 {
+				reg = <0x228 0x4>;
+				bits = <4 3>;
+			};
+			cpr_efuse_ring3: ring3@229 {
+				reg = <0x229 0x4>;
+				bits = <0 3>;
+			};
+			cpr_efuse_revision: revision@218 {
+				reg = <0x218 0x4>;
+				bits = <3 3>;
+			};
+		};
+
+		rng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		bimc: interconnect@400000 {
+			reg = <0x00400000 0x80000>;
+			compatible = "qcom,qcs404-bimc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				<&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>, /* TM */
+			      <0x004a8000 0x1000>; /* SROT */
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2";
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			#thermal-sensor-cells = <1>;
+		};
+
+		pcnoc: interconnect@500000 {
+			reg = <0x00500000 0x15080>;
+			compatible = "qcom,qcs404-pcnoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
+				<&rpmcc RPM_SMD_PNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			reg = <0x00580000 0x23080>;
+			compatible = "qcom,qcs404-snoc";
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				<&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		remoteproc_cdsp: remoteproc@b00000 {
+			compatible = "qcom,qcs404-cdsp-pas";
+			reg = <0x00b00000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			/*
+			 * If the node was using the PIL binding, then include properties:
+			 * clocks = <&xo_board>,
+			 *          <&gcc GCC_CDSP_CFG_AHB_CLK>,
+			 *          <&gcc GCC_CDSP_TBU_CLK>,
+			 *          <&gcc GCC_BIMC_CDSP_CLK>,
+			 *          <&turingcc TURING_WRAPPER_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+			 * clock-names = "xo",
+			 *               "sway",
+			 *               "tbu",
+			 *               "bimc",
+			 *               "ahb_aon",
+			 *               "q6ss_slave",
+			 *               "q6ss_master",
+			 *               "q6_axim";
+			 * resets = <&gcc GCC_CDSP_RESTART>;
+			 * reset-names = "restart";
+			 * qcom,halt-regs = <&tcsr 0x19004>;
+			 */
+
+			memory-region = <&cdsp_fw_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,remote-pid = <5>;
+				mboxes = <&apcs_glb 12>;
+
+				label = "cdsp";
+			};
+		};
+
+		usb3: usb@7678800 {
+			compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
+			reg = <0x07678800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+			status = "disabled";
+
+			usb3_dwc3: usb@7580000 {
+				compatible = "snps,dwc3";
+				reg = <0x07580000 0xcd00>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_prim>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "otg";
+			};
+		};
+
+		usb2: usb@79b8800 {
+			compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
+			reg = <0x079b8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
+				 <&gcc GCC_PCNOC_USB2_CLK>,
+				 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "core", "iface", "sleep", "mock_utmi";
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+			status = "disabled";
+
+			usb@78c0000 {
+				compatible = "snps,dwc3";
+				reg = <0x078c0000 0xcc00>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy_sec>;
+				phy-names = "usb2-phy";
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+				dr_mode = "peripheral";
+			};
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,qcs404-pinctrl";
+			reg = <0x01000000 0x200000>,
+			      <0x01300000 0x200000>,
+			      <0x07b00000 0x200000>;
+			reg-names = "south", "north", "east";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 120>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c0_default: blsp1-i2c0-default-state {
+				pins = "gpio32", "gpio33";
+				function = "blsp_i2c0";
+			};
+
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
+				pins = "gpio24", "gpio25";
+				function = "blsp_i2c1";
+			};
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				sda-pins {
+					pins = "gpio19";
+					function = "blsp_i2c_sda_a2";
+				};
+
+				scl-pins {
+					pins = "gpio20";
+					function = "blsp_i2c_scl_a2";
+				};
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio84", "gpio85";
+				function = "blsp_i2c3";
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio117", "gpio118";
+				function = "blsp_i2c4";
+			};
+
+			blsp1_uart0_default: blsp1-uart0-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "blsp_uart0";
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_uart1";
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				rx-pins {
+					pins = "gpio18";
+					function = "blsp_uart_rx_a2";
+				};
+
+				tx-pins {
+					pins = "gpio17";
+					function = "blsp_uart_tx_a2";
+				};
+			};
+
+			blsp1_uart3_default: blsp1-uart3-default-state {
+				cts-pins {
+					pins = "gpio84";
+					function = "blsp_uart3";
+				};
+
+				rts-tx-pins {
+					pins = "gpio85", "gpio82";
+					function = "blsp_uart3";
+				};
+
+				rx-pins {
+					pins = "gpio83";
+					function = "blsp_uart3";
+				};
+			};
+
+			blsp2_i2c0_default: blsp2-i2c0-default-state {
+				pins = "gpio28", "gpio29";
+				function = "blsp_i2c5";
+			};
+
+			blsp1_spi0_default: blsp1-spi0-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "blsp_spi0";
+			};
+
+			blsp1_spi1_default: blsp1-spi1-default-state {
+				mosi-pins {
+					pins = "gpio22";
+					function = "blsp_spi_mosi_a1";
+				};
+
+				miso-pins {
+					pins = "gpio23";
+					function = "blsp_spi_miso_a1";
+				};
+
+				cs-n-pins {
+					pins = "gpio24";
+					function = "blsp_spi_cs_n_a1";
+				};
+
+				clk-pins {
+					pins = "gpio25";
+					function = "blsp_spi_clk_a1";
+				};
+			};
+
+			blsp1_spi2_default: blsp1-spi2-default-state {
+				pins = "gpio17", "gpio18", "gpio19", "gpio20";
+				function = "blsp_spi2";
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				pins = "gpio82", "gpio83", "gpio84", "gpio85";
+				function = "blsp_spi3";
+			};
+
+			blsp1_spi4_default: blsp1-spi4-default-state {
+				pins = "gpio37", "gpio38", "gpio117", "gpio118";
+				function = "blsp_spi4";
+			};
+
+			blsp2_spi0_default: blsp2-spi0-default-state {
+				pins = "gpio26", "gpio27", "gpio28", "gpio29";
+				function = "blsp_spi5";
+			};
+
+			blsp2_uart0_default: blsp2-uart0-default-state {
+				pins = "gpio26", "gpio27", "gpio28", "gpio29";
+				function = "blsp_uart5";
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-qcs404";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&pcie_phy>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
+			assigned-clock-rates = <19200000>;
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,qcs404-tcsr", "syscon";
+			reg = <0x01937000 0x25000>;
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		remoteproc_wcss: remoteproc@7400000 {
+			compatible = "qcom,qcs404-wcss-pas";
+			reg = <0x07400000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&wlan_fw_mem>;
+
+			qcom,smem-states = <&wcss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 16>;
+
+				label = "wcss";
+			};
+		};
+
+		pcie_phy: phy@7786000 {
+			compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
+			reg = <0x07786000 0xb8>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
+				 <&gcc GCC_PCIE_0_PIPE_ARES>;
+			reset-names = "phy", "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		sdcc1: mmc@7804000 {
+			compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x25000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "okay";
+		};
+
+		blsp1_uart0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart0_default>;
+			status = "disabled";
+		};
+
+		blsp1_uart1: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "okay";
+		};
+
+		ethernet: ethernet@7a80000 {
+			compatible = "qcom,qcs404-ethqos";
+			reg = <0x07a80000 0x10000>,
+				<0x07a96000 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+			clocks = <&gcc GCC_ETH_AXI_CLK>,
+				<&gcc GCC_ETH_SLAVE_AHB_CLK>,
+				<&gcc GCC_ETH_PTP_CLK>,
+				<&gcc GCC_ETH_RGMII_CLK>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			snps,tso;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		wifi: wifi@a000000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0xa000000 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		blsp1_uart3: serial@78b2000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b2000 0x200>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart3_default>;
+			status = "disabled";
+		};
+
+		blsp1_i2c0: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi0: spi@78b5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c1: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi1: spi@78b6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi2: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b8000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b9000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi4: spi@78b9000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b9000 0x600>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_spi4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x17000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			status = "disabled";
+		};
+
+		blsp2_uart0: serial@7aef000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x07aef000 0x200>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_uart0_default>;
+			status = "disabled";
+		};
+
+		blsp2_i2c0: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi0: spi@7af5000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp2_spi0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sram@8600000 {
+			compatible = "qcom,qcs404-imem", "syscon", "simple-mfd";
+			reg = <0x08600000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+		};
+
+		apcs_glb: mailbox@b011000 {
+			compatible = "qcom,qcs404-apcs-apps-global",
+				     "qcom,msm8916-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+			clock-names = "pll", "aux";
+			#clock-cells = <0>;
+		};
+
+		apcs_hfpll: clock-controller@b016000 {
+			compatible = "qcom,hfpll";
+			reg = <0x0b016000 0x30>;
+			#clock-cells = <0>;
+			clock-output-names = "apcs_hfpll";
+			clocks = <&xo_board>;
+			clock-names = "xo";
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		cpr: power-controller@b018000 {
+			compatible = "qcom,qcs404-cpr", "qcom,cpr";
+			reg = <0x0b018000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&xo_board>;
+			clock-names = "ref";
+			vdd-apc-supply = <&pms405_s3>;
+			#power-domain-cells = <0>;
+			operating-points-v2 = <&cpr_opp_table>;
+			acc-syscon = <&tcsr>;
+
+			nvmem-cells = <&cpr_efuse_quot_offset1>,
+				<&cpr_efuse_quot_offset2>,
+				<&cpr_efuse_quot_offset3>,
+				<&cpr_efuse_init_voltage1>,
+				<&cpr_efuse_init_voltage2>,
+				<&cpr_efuse_init_voltage3>,
+				<&cpr_efuse_quot1>,
+				<&cpr_efuse_quot2>,
+				<&cpr_efuse_quot3>,
+				<&cpr_efuse_ring1>,
+				<&cpr_efuse_ring2>,
+				<&cpr_efuse_ring3>,
+				<&cpr_efuse_revision>;
+			nvmem-cell-names = "cpr_quotient_offset1",
+				"cpr_quotient_offset2",
+				"cpr_quotient_offset3",
+				"cpr_init_voltage1",
+				"cpr_init_voltage2",
+				"cpr_init_voltage3",
+				"cpr_quotient1",
+				"cpr_quotient2",
+				"cpr_quotient3",
+				"cpr_ring_osc1",
+				"cpr_ring_osc2",
+				"cpr_ring_osc3",
+				"cpr_fuse_revision";
+		};
+
+		timer@b120000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@b121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0b128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		remoteproc_adsp: remoteproc@c700000 {
+			compatible = "qcom,qcs404-adsp-pas";
+			reg = <0x0c700000 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_fw_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+
+				label = "adsp";
+			};
+		};
+
+		pcie: pci@10000000 {
+			compatible = "qcom,pcie-qcs404";
+			reg = <0x10000000 0xf1d>,
+			      <0x10000f20 0xa8>,
+			      <0x07780000 0x2000>,
+			      <0x10001000 0x2000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
+				 <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
+
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+			clock-names = "iface", "aux", "master_bus", "slave_bus";
+
+			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
+				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
+				 <&gcc GCC_PCIE_0_BCR>,
+				 <&gcc GCC_PCIE_0_AHB_ARES>;
+			reset-names = "axi_m",
+				      "axi_s",
+				      "axi_m_sticky",
+				      "pipe_sticky",
+				      "pwr",
+				      "ahb";
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 0xff08>,
+			     <GIC_PPI 3 0xff08>,
+			     <GIC_PPI 4 0xff08>,
+			     <GIC_PPI 1 0xff08>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 10>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 18>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		lpass-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				lpass_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cluster_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cluster_crit: cluster-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cluster_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu0_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu1_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu2_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpu3_alert1: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
new file mode 100644
index 000000000..5a25cdec9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -0,0 +1,502 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qdu1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
+	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l9a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c2_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c3_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c4_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c5_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c6_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c9_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c10_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c12_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c15_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi1_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi1_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&reserved_memory {
+	ecc_meta_data_mem: ecc-meta-data@e0000000 {
+		reg = <0x0 0xe0000000 0x0 0x20000000>;
+		no-map;
+	};
+
+	harq_buffer_mem: harq-buffer@800000000 {
+		reg = <0x8 0x0 0x0 0x80000000>;
+		no-map;
+	};
+
+	tenx_sp_buffer_mem: tenx-sp-buffer@880000000 {
+		reg = <0x8 0x80000000 0x0 0x50000000>;
+		no-map;
+	};
+
+	fapi_buffer_mem: fapi-buffer@8d0000000 {
+		reg = <0x8 0xd0000000 0x0 0x20000000>;
+		no-map;
+	};
+};
+
+&sdhc {
+	pinctrl-0 = <&sdc_on_state>;
+	pinctrl-1 = <&sdc_off_state>;
+	pinctrl-names = "default", "sleep";
+
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	supports-cqe;
+
+	vmmc-supply = <&vreg_l10a_2p95>;
+	vqmmc-supply = <&vreg_l7a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 2>;
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
new file mode 100644
index 000000000..1c0e5d271
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -0,0 +1,1467 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,qdu1000-gcc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen: chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domains = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+
+		CPU_OFF: cpu-sleep-0 {
+			compatible = "arm,idle-state";
+			entry-latency-us = <274>;
+			exit-latency-us = <480>;
+			min-residency-us = <3934>;
+			arm,psci-suspend-param = <0x40000004>;
+			local-timer-stop;
+		};
+	};
+
+	domain-idle-states {
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "domain-idle-state";
+			entry-latency-us = <584>;
+			exit-latency-us = <2332>;
+			min-residency-us = <6118>;
+			arm,psci-suspend-param = <0x41000044>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "domain-idle-state";
+			entry-latency-us = <2893>;
+			exit-latency-us = <4023>;
+			min-residency-us = <9987>;
+			arm,psci-suspend-param = <0x41003344>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-qdu1000", "qcom,scm";
+		};
+	};
+
+	mc_virt: interconnect-0 {
+		compatible = "qcom,qdu1000-mc-virt";
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		#interconnect-cells = <2>;
+	};
+
+	clk_virt: interconnect-1 {
+		compatible = "qcom,qdu1000-clk-virt";
+		qcom,bcm-voters = <&apps_bcm_voter>;
+		#interconnect-cells = <2>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: xbl-dt-log@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@80640000 {
+			reg = <0x0 0x80640000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: tme-crash-dump@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: cpucp-fw@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_sc_mem: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x40000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@81d00000 {
+			reg = <0x0 0x81d00000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@81e00000 {
+			reg = <0x0 0x81e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@82300000 {
+			reg = <0x0 0x82300000 0x0 0x500000>;
+			no-map;
+		};
+
+		ta_mem: ta@82800000 {
+			reg = <0x0 0x82800000 0x0 0xa00000>;
+			no-map;
+		};
+
+		fs1_mem: fs1@83200000 {
+			reg = <0x0 0x83200000 0x0 0x400000>;
+			no-map;
+		};
+
+		fs2_mem: fs2@83600000 {
+			reg = <0x0 0x83600000 0x0 0x400000>;
+			no-map;
+		};
+
+		fs3_mem: fs3@83a00000 {
+			reg = <0x0 0x83a00000 0x0 0x400000>;
+			no-map;
+		};
+
+		/* Linux kernel image is loaded at 0x83e00000 */
+
+		ipa_fw_mem: ipa-fw@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8be10000 {
+			reg = <0x0 0x8be10000 0x0 0x14000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8c000000 {
+			reg = <0x0 0x8c000000 0x0 0x12c00000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@9ec00000 {
+			reg = <0x0 0x9ec00000 0x0 0x80000>;
+			no-map;
+		};
+
+		tenx_mem: tenx@a0000000 {
+			reg = <0x0 0xa0000000 0x0 0x19600000>;
+			no-map;
+		};
+
+		oem_tenx_mem: oem-tenx@b9600000 {
+			reg = <0x0 0xb9600000 0x0 0x6a00000>;
+			no-map;
+		};
+
+		tenx_q6_buffer_mem: tenx-q6-buffer@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x3200000>;
+			no-map;
+		};
+
+		ipa_buffer_mem: ipa-buffer@c3200000 {
+			reg = <0x0 0xc3200000 0x0 0x12c00000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@80000 {
+			compatible = "qcom,qdu1000-gcc";
+			reg = <0x0 0x80000 0x0 0x1f4200>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0
+					 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart0_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x998000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x99c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x116 0x0>;
+			#dma-cells = <3>;
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xac0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x103 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart8_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart13_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				pinctrl-names = "default";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa9c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		system_noc: interconnect@1640000 {
+			compatible = "qcom,qdu1000-system-noc";
+			reg = <0x0 0x1640000 0x0 0x45080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x1f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		sdhc: mmc@8804000 {
+			compatible = "qcom,qdu1000-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x08804000 0x0 0x1000>,
+			      <0x0 0x08805000 0x0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC5_AHB_CLK>,
+				 <&gcc GCC_SDCC5_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC5_BCR>;
+
+			interconnects = <&system_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			power-domains = <&rpmhpd QDU1000_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+			dma-coherent;
+
+			bus-width = <8>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <6528000 1652800>;
+					opp-avg-kBps = <400000 0>;
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,qdu1000-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0xc400000 0x0 0x3000>,
+			      <0x0 0xc500000 0x0 0x400000>,
+			      <0x0 0xc440000 0x0 0x80000>,
+			      <0x0 0xc4c0000 0x0 0x10000>,
+			      <0x0 0xc42d000 0x0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,qdu1000-tlmm";
+			reg = <0x0 0xf000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_uart0_default: qup-uart0-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio10", "gpio11";
+				function = "qup01";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio10", "gpio11", "gpio12";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio13";
+				function = "gpio";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio12", "gpio13";
+				function = "qup02";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio12", "gpio13", "gpio10";
+				function = "qup02";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "gpio";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio14", "gpio15", "gpio16";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio17";
+				function = "gpio";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio16", "gpio17", "gpio14";
+				function = "qup04";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio15";
+				function = "gpio";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio130", "gpio131";
+				function = "qup05";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio130", "gpio131", "gpio132";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio133";
+				function = "gpio";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio132", "gpio133";
+				function = "qup06";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio132", "gpio133", "gpio130";
+				function = "qup06";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio131";
+				function = "gpio";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio135";
+				function = "qup07";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state  {
+				pins = "gpio134";
+				function = "qup07";
+			};
+
+			qup_uart8_default: qup-uart8-default-state {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio22", "gpio23";
+				function = "qup11";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio22", "gpio23", "gpio24";
+				function = "qup11";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio25";
+				function = "gpio";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio24", "gpio25";
+				function = "qup12";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio24", "gpio25", "gpio22";
+				function = "qup12";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio26", "gpio27";
+				function = "qup13";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio26", "gpio27", "gpio28";
+				function = "qup13";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio29";
+				function = "gpio";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio28", "gpio29";
+				function = "qup14";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio28", "gpio29", "gpio26";
+				function = "qup14";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio27";
+				function = "gpio";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio30", "gpio31";
+				function = "qup15";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio30", "gpio31", "gpio32";
+				function = "qup15";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio33";
+				function = "gpio";
+			};
+
+			qup_uart13_default: qup-uart13-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio34", "gpio35";
+				function = "qup16";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup16";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio37", "gpio38";
+				function = "gpio";
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio40", "gpio41";
+				function = "qup17";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio40", "gpio41", "gpio30";
+				function = "qup17";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio31";
+				function = "gpio";
+			};
+
+			sdc_on_state: sdc-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc_off_state: sdc-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		sram@14680000 {
+			compatible = "qcom,qdu1000-imem", "syscon", "simple-mfd";
+			reg = <0 0x14680000 0 0x1000>;
+			ranges = <0 0 0x14680000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,qdu1000-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17200000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17260000 0x0 0x80000>;	/* GICR * 4 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>,
+				      <0x17426000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    2>, <SLEEP_TCS     3>,
+					  <WAKE_TCS      3>, <CONTROL_TCS   0>;
+			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,qdu1000-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,qdu1000-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d90000 {
+			compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,qdu1000-gem-noc";
+			reg = <0x0 0x19100000 0x0 0xB8080>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			#interconnect-cells = <2>;
+		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,qdu1000-llcc";
+			reg = <0 0x19200000 0 0xd80000>,
+			      <0 0x1a200000 0 0x80000>,
+			      <0 0x221c8128 0 0x4>;
+			reg-names = "llcc_base",
+				    "llcc_broadcast_base",
+				    "multi_channel_register";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			multi-ch-bit-off = <24 2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
new file mode 100644
index 000000000..37abb83ea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Linaro Ltd
+ */
+
+/dts-v1/;
+
+#include "qcm2290.dtsi"
+#include "pm2250.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB1";
+	compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290";
+
+	aliases {
+		serial0 = &uart4;
+		sdhc1 = &sdhc_1;
+		sdhc2 = &sdhc_2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&key_volp_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 96 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_HDMI_OUT_1P2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_1v2>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Main barrel jack input */
+	vdc_12v: regulator-vdc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 1.2V supply stepped down from the barrel jack input */
+	vdc_1v2: regulator-vdc-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 3.3V supply stepped down from the barrel jack input */
+	vdc_3v3: regulator-vdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 5V supply stepped down from the barrel jack input */
+	vdc_5v: regulator-vdc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
+	vdc_vbat_som: regulator-vdc-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* PM2250 charger out, supplied by VBAT */
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		vin-supply = <&vdc_vbat_som>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pm2250_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm2250-regulators";
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_l1_l2_l3_l5_l6_l7_l8_l9_l10_l11_l12-supply = <&pm2250_s3>;
+		vdd_l4_l17_l18_l19_l20_l21_l22-supply = <&vph_pwr>;
+		vdd_l13_l14_l15_l16-supply = <&pm2250_s4>;
+
+		/*
+		 * S1 - VDD_APC
+		 * S2 - VDD_CX
+		 */
+
+		pm2250_s3: s3 {
+			/* 0.4V-1.6625V -> 1.3V (Power tree requirements) */
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-boot-on;
+		};
+
+		pm2250_s4: s4 {
+			/* 1.2V-2.35V -> 2.05V (Power tree requirements) */
+			regulator-min-microvolt = <2072000>;
+			regulator-max-microvolt = <2072000>;
+			regulator-boot-on;
+		};
+
+		/* L1 - VDD_MX */
+
+		pm2250_l2: l2 {
+			/* LPDDR4X VDD2 */
+			regulator-min-microvolt = <1136000>;
+			regulator-max-microvolt = <1136000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l3: l3 {
+			/* LPDDR4X VDDQ */
+			regulator-min-microvolt = <616000>;
+			regulator-max-microvolt = <616000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l4: l4 {
+			/* max = 3.05V -> max = 2.7 to disable 3V signaling (SDHCI2) */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-allow-set-load;
+		};
+
+		pm2250_l5: l5 {
+			/* CSI/DSI */
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l6: l6 {
+			/* DRAM PLL */
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l7: l7 {
+			/* Wi-Fi CX/MX */
+			regulator-min-microvolt = <664000>;
+			regulator-max-microvolt = <664000>;
+		};
+
+		/*
+		 * L8 - VDD_LPI_CX
+		 * L9 - VDD_LPI_MX
+		 */
+
+		pm2250_l10: l10 {
+			/* Wi-Fi RFA */
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm2250_l11: l11 {
+			/* GPS RF1 */
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+		};
+
+		pm2250_l12: l12 {
+			/* USB PHYs */
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <928000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l13: l13 {
+			/* USB/QFPROM/PLLs */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l14: l14 {
+			/* SDHCI1 VQMMC */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			/* Broken hardware, never turn it off! */
+			regulator-always-on;
+		};
+
+		pm2250_l15: l15 {
+			/* WCD/DSI/BT VDDIO */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm2250_l16: l16 {
+			/* GPS RF2 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		pm2250_l17: l17 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm2250_l18: l18 {
+			/* VDD_PXn */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm2250_l19: l19 {
+			/* VDD_PXn */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm2250_l20: l20 {
+			/* SDHCI1 VMMC */
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-allow-set-load;
+		};
+
+		pm2250_l21: l21 {
+			/* SDHCI2 VMMC */
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-allow-set-load;
+			regulator-boot-on;
+		};
+
+		pm2250_l22: l22 {
+			/* Wi-Fi */
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3312000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm2250_l20>;
+	vqmmc-supply = <&pm2250_l14>;
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+	non-removable;
+	supports-cqe;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm2250_l21>;
+	vqmmc-supply = <&pm2250_l4>;
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_state_on &sd_det_in_on>;
+	pinctrl-1 = <&sdc2_state_off &sd_det_in_off>;
+	pinctrl-names = "default", "sleep";
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	sd_det_in_on: sd-det-in-on-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sd_det_in_off: sd-det-in-off-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	key_volp_n: key-volp-n-state {
+		pins = "gpio96";
+		function = "gpio";
+		bias-pull-up;
+		output-disable;
+	};
+};
+
+/* UART connected to the Micro-USB port via a FTDI chip */
+&uart4 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&pm2250_l12>;
+	vdda-pll-supply = <&pm2250_l13>;
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm2250_l12>;
+	vdda-pll-supply = <&pm2250_l13>;
+	vdda-phy-dpdm-supply = <&pm2250_l21>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
new file mode 100644
index 000000000..9738c0dac
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "sm4250.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRB4210 RB2";
+	compatible = "qcom,qrb4210-rb2", "qcom,qrb4210", "qcom,sm4250";
+
+	aliases {
+		serial0 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		clk40M: can-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&kypd_vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bt {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-user0 {
+			label = "green:user0";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VREG_HDMI_OUT_1P2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_1v2>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lt9611_3v3: regulator-lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Main barrel jack input */
+	vdc_12v: regulator-vdc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 1.2V supply stepped down from the barrel jack input */
+	vdc_1v2: regulator-vdc-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 3.3V supply stepped down from the barrel jack input */
+	vdc_3v3: regulator-vdc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdc_12v>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* 5V supply stepped down from the barrel jack input */
+	vdc_5v: regulator-vdc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* "Battery" voltage for the SoM, stepped down from the barrel jack input */
+	vdc_vbat_som: regulator-vdc-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* PMI632 charger out, supplied by VBAT */
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		vin-supply = <&vdc_vbat_som>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/qrb4210/a610_zap.mbn";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_hdmi_out_1p2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+		pinctrl-names = "default";
+		#sound-dai-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l18a_1p232>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm6125_gpios {
+	kypd_vol_up_n: kypd-vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qrb4210/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qrb4210/cdsp.mbn";
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l7-l17-l18-supply = <&vreg_s6a_1p352>;
+		vdd-l2-l3-l4-supply = <&vreg_s6a_1p352>;
+		vdd-l5-l15-l19-l20-l21-l22-supply = <&vph_pwr>;
+		vdd-l6-l8-supply = <&vreg_s5a_0p848>;
+		vdd-l9-l11-supply = <&vreg_s7a_2p04>;
+		vdd-l10-l13-l14-supply = <&vreg_s7a_2p04>;
+		vdd-l12-l16-supply = <&vreg_s7a_2p04>;
+		vdd-l23-l24-supply = <&vph_pwr>;
+
+		vreg_s5a_0p848: s5 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s6a_1p352: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a_2p04: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2080000>;
+		};
+
+		vreg_l1a_1p0: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a_0p9: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a_2p96: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a_0p6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a_1p256: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a_0p664: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a_3p128: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a_1p3: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a_1p3: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		vreg_l18a_1p232: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1312000>;
+		};
+
+		vreg_l19a_1p8: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a_1p8: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a_2p704: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		vreg_l22a_2p96: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a_3p3: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a_2p96: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l24a_2p96>;
+	vqmmc-supply = <&vreg_l11a_1p8>;
+	no-sdio;
+	non-removable;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; /* card detect gpio */
+
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l22a_2p96>;
+	vqmmc-supply = <&vreg_l5a_2p96>;
+	no-sdio;
+
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&clk40M>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <43 2>, <49 1>, <54 1>,
+			       <56 3>, <61 2>, <64 1>,
+			       <68 1>, <72 8>, <96 1>;
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio41";
+		function = "gpio";
+		input-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio46";
+		function = "gpio";
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "super-speed";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
new file mode 100644
index 000000000..bb149e577
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "qrb5165-rb5.dts"
+
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+
+	ports {
+		/* The port index denotes CSIPHY id i.e. csiphy2 */
+		port@2 {
+			csiphy2_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply  = <&vreg_l7f_1p8>;
+		avdd-supply = <&vdc_5v>;
+		dvdd-supply = <&vdc_5v>;
+
+		port {
+			imx577_ep: endpoint {
+				clock-lanes = <1>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy2_ep>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
new file mode 100644
index 000000000..e95a004c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -0,0 +1,1341 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Robotics RB5";
+	compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
+	qcom,msm-id = <455 0x20001>;
+	qcom,board-id = <11 3>;
+
+	aliases {
+		serial0 = &uart12;
+		sdhc2 = &sdhc_2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal oscillator dedicated to MCP2518FD */
+	clk40M: can-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	dc12v: dc12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user4 {
+			label = "green:user4";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-bt {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	lt9611_1v2: lt9611-vdd12-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	lt9611_3v3: lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	thermal-zones {
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8150l-pcb-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wifi-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <52000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		vin-supply = <&vreg_l11c_3p3>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vbat_som: vbat-som-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vdc_3v3: vdc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		vin-supply = <&vreg_l11c_3p3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdc_5v: vdc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vreg_l11c_3p3>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8009-1-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2f_0p95: smps2 {
+			regulator-name = "vreg_s2f_0p95";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1f_1p1: ldo1 {
+			regulator-name = "vreg_l1f_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-name = "vreg_l2f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p92: ldo18 {
+			regulator-name = "vreg_l18a_0p92";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p7: ldo4 {
+			regulator-name = "vreg_l4c_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/a650_zap.mbn";
+	};
+};
+
+/* LS-I2C0 */
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+#if 0
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+#endif
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+		};
+	};
+};
+
+/* LS-I2C1 */
+&i2c15 {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l9a_1p2>;
+
+#if 0
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+#endif
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l5a_0p88>;
+};
+
+&pm8150_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "xo_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "wifi_therm";
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wifi-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&pcie2_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pm8150_gpios {
+	gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
+	gpio-line-names =
+		"NC",
+		"OPTION2",
+		"PM_GPIO-F",
+		"PM_SLP_CLK_IN",
+		"OPTION1",
+		"VOL_UP_N",
+		"PM8250_GPIO7", /* Blue LED */
+		"SP_ARI_PWR_ALARM",
+		"GPIO_9_P", /* Yellow LED */
+		"GPIO_10_P"; /* Green LED */
+};
+
+&pm8150b_adc {
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "conn_therm";
+	};
+};
+
+&pm8150b_adc_tm {
+	status = "okay";
+
+	conn-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"HAP_BOOST_EN", /* SOM */
+		"SMB_STAT", /* SOM */
+		"NC",
+		"NC",
+		"SDM_FORCE_USB_BOOT",
+		"NC",
+		"NC",
+		"NC";
+};
+
+&pm8150l_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_msm_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "pm8150l_therm";
+	};
+};
+
+&pm8150l_adc_tm {
+	status = "okay";
+
+	skin-msm-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pm8150l-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_gpios {
+	gpio-line-names =
+		"NC",
+		"PM3003A_EN",
+		"NC",
+		"NC",
+		"PM_GPIO5", /* HDMI RST_N */
+		"PM_GPIO-A", /* PWM */
+		"PM_GPIO7",
+		"NC",
+		"NC",
+		"PM_GPIO-B",
+		"NC",
+		"PM3003A_MODE";
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio5";
+		function = "normal";
+
+		output-high;
+		input-disable;
+		power-source = <0>;
+	};
+};
+
+&pm8150l_lpg {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+		default-state = "on";
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&q6afedai {
+	dai@16 {
+		reg = <PRIMARY_MI2S_RX>;
+		qcom,sd-lines = <0 1 2 3>;
+	};
+};
+
+/* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+	dai@20 {
+		reg = <TERTIARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+	cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&sound {
+	compatible = "qcom,qrb5165-rb5-sndcard";
+	pinctrl-0 = <&tert_mi2s_active>;
+	pinctrl-names = "default";
+	model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"VA DMIC0", "vdd-micb",
+		"VA DMIC1", "vdd-micb",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&lt9611_codec 0>;
+		};
+	};
+
+	dma-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+/* CAN */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
+	cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+
+	can@0 {
+		compatible = "microchip,mcp2518fd";
+		reg = <0>;
+		clocks = <&clk40M>;
+		interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: speaker@0,3 {
+		compatible = "sdw10217211000";
+		reg = <0 3>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+	};
+
+	right_spkr: speaker@0,4 {
+		compatible = "sdw10217211000";
+		reg = <0 4>;
+		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+	gpio-line-names =
+		"GPIO-MM",
+		"GPIO-NN",
+		"GPIO-OO",
+		"GPIO-PP",
+		"GPIO-A",
+		"GPIO-C",
+		"GPIO-E",
+		"GPIO-D",
+		"I2C0-SDA",
+		"I2C0-SCL",
+		"GPIO-TT", /* GPIO_10 */
+		"NC",
+		"GPIO_12_I2C_SDA",
+		"GPIO_13_I2C_SCL",
+		"GPIO-X",
+		"GPIO_15_RGMII_INT",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX",
+		"HST_BT_UART_RX",
+		"HST_WLAN_EN", /* GPIO_20 */
+		"HST_BT_EN",
+		"GPIO-AAA",
+		"GPIO-BBB",
+		"GPIO-CCC",
+		"GPIO-Z",
+		"GPIO-DDD",
+		"GPIO-BB",
+		"GPIO_28_CAN_SPI_MISO",
+		"GPIO_29_CAN_SPI_MOSI",
+		"GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
+		"GPIO_31_CAN_SPI_CS",
+		"GPIO-UU",
+		"NC",
+		"UART1_TXD_SOM",
+		"UART1_RXD_SOM",
+		"UART0_CTS",
+		"UART0_RTS",
+		"UART0_TXD",
+		"UART0_RXD",
+		"SPI1_MISO", /* GPIO_40 */
+		"SPI1_MOSI",
+		"SPI1_CLK",
+		"SPI1_CS",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"GPIO-F",
+		"GPIO-JJ",
+		"Board_ID1",
+		"Board_ID2",
+		"NC", /* GPIO_50 */
+		"NC",
+		"SPI0_MISO",
+		"SPI0_MOSI",
+		"SPI0_SCLK",
+		"SPI0_CS",
+		"GPIO-QQ",
+		"GPIO-RR",
+		"USB2LAN_RESET",
+		"USB2LAN_EXTWAKE",
+		"NC", /* GPIO_60 */
+		"NC",
+		"NC",
+		"LT9611_INT",
+		"GPIO-AA",
+		"USB_CC_DIR",
+		"GPIO-G",
+		"GPIO-LL",
+		"USB_DP_HPD_1P8",
+		"NC",
+		"NC", /* GPIO_70 */
+		"SD_CMD",
+		"SD_DAT3",
+		"SD_SCLK",
+		"SD_DAT2",
+		"SD_DAT1",
+		"SD_DAT0", /* BOOT_CFG3 */
+		"SD_UFS_CARD_DET_N",
+		"GPIO-II",
+		"PCIE0_RST_N",
+		"PCIE0_CLK_REQ_N", /* GPIO_80 */
+		"PCIE0_WAKE_N",
+		"GPIO-CC",
+		"GPIO-DD",
+		"GPIO-EE",
+		"GPIO-FF",
+		"GPIO-GG",
+		"GPIO-HH",
+		"GPIO-VV",
+		"GPIO-WW",
+		"NC", /* GPIO_90 */
+		"NC",
+		"GPIO-K",
+		"GPIO-I",
+		"CSI0_MCLK",
+		"CSI1_MCLK",
+		"CSI2_MCLK",
+		"CSI3_MCLK",
+		"GPIO-AA", /* CSI4_MCLK */
+		"GPIO-BB", /* CSI5_MCLK */
+		"GPIO-KK", /* GPIO_100 */
+		"CCI_I2C_SDA0",
+		"CCI_I2C_SCL0",
+		"CCI_I2C_SDA1",
+		"CCI_I2C_SCL1",
+		"CCI_I2C_SDA2",
+		"CCI_I2C_SCL2",
+		"CCI_I2C_SDA3",
+		"CCI_I2C_SCL3",
+		"GPIO-L",
+		"NC", /* GPIO_110 */
+		"NC",
+		"ACCEL_INT",
+		"GYRO_INT",
+		"GPIO-J",
+		"GPIO-YY",
+		"GPIO-H",
+		"GPIO-ZZ",
+		"NC",
+		"NC",
+		"NC", /* GPIO_120 */
+		"NC",
+		"MAG_INT",
+		"MAG_DRDY_INT",
+		"HST_SW_CTRL",
+		"GPIO-M",
+		"GPIO-N",
+		"GPIO-O",
+		"GPIO-P",
+		"PS_INT",
+		"WSA1_EN", /* GPIO_130 */
+		"USB_HUB_RESET",
+		"SDM_FORCE_USB_BOOT",
+		"I2S1_CLK_HDMI",
+		"I2S1_DATA0_HDMI",
+		"I2S1_WS_HDMI",
+		"GPIO-B",
+		"GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
+		"PCM_CLK",
+		"PCM_DI",
+		"PCM_DO", /* GPIO_140 */
+		"PCM_FS",
+		"HST_SLIM_CLK",
+		"HST_SLIM_DATA",
+		"GPIO-U",
+		"GPIO-Y",
+		"GPIO-R",
+		"GPIO-Q",
+		"GPIO-S",
+		"GPIO-T",
+		"GPIO-V", /* GPIO_150 */
+		"GPIO-W",
+		"DMIC_CLK1",
+		"DMIC_DATA1",
+		"DMIC_CLK2",
+		"DMIC_DATA2",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC_CLK3",
+		"DMIC_DATA3",
+		"I2C4_SDA", /* GPIO_160 */
+		"I2C4_SCL",
+		"SPI3_CS1",
+		"SPI3_CS2",
+		"SPI2_MISO_LS3",
+		"SPI2_MOSI_LS3",
+		"SPI2_CLK_LS3",
+		"SPI2_ACCEL_CS_LS3",
+		"SPI2_CS1",
+		"NC",
+		"GPIO-SS", /* GPIO_170 */
+		"GPIO-XX",
+		"SPI3_MISO",
+		"SPI3_MOSI",
+		"SPI3_CLK",
+		"SPI3_CS",
+		"HST_BLE_SNS_UART_TX",
+		"HST_BLE_SNS_UART_RX",
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio63";
+		function = "gpio";
+		bias-disable;
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio77";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_active>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s4a_1p8>;
+	qcom,dmic-sample-rate = <600000>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sm8250.dtsi */
+&qup_spi0_cs_gpio {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi0_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
new file mode 100644
index 000000000..2a862c833
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qru1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
+	compatible = "qcom,qru1000-idp", "qcom,qru1000";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l9a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c2_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c3_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c4_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c5_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c6_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c9_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c10_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c12_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c15_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi1_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi1_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&reserved_memory {
+	ecc_meta_data_mem: ecc-meta-data@f0000000 {
+		reg = <0x0 0xf0000000 0x0 0x10000000>;
+		no-map;
+	};
+
+	tenx_sp_mem: tenx-sp-buffer@800000000 {
+		reg = <0x8 0x0 0x0 0x80000000>;
+		no-map;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 2>;
+};
+
+&uart7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi
new file mode 100644
index 000000000..eac5dc54a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+/delete-node/ &tenx_mem;
+/delete-node/ &oem_tenx_mem;
+/delete-node/ &tenx_q6_buffer_mem;
+
+&reserved_memory {
+	oem_tenx_mem: oem-tenx@a0000000 {
+		reg = <0x0 0xa0000000 0x0 0x6400000>;
+		no-map;
+	};
+
+	mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 {
+		reg = <0x0 0xaea00000 0x0 0x6400000>;
+		no-map;
+	};
+
+	tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 {
+		reg = <0x0 0xb4e00000 0x0 0x3200000>;
+		no-map;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
new file mode 100644
index 000000000..5e4287f8c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sa8155p.dtsi"
+#include "pmm8155au_1.dtsi"
+#include "pmm8155au_2.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SA8155P ADP";
+	compatible = "qcom,sa8155p-adp", "qcom,sa8155p";
+
+	aliases {
+		serial0 = &uart2;
+		serial1 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vreg_3p3: vreg-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/*
+	 * S4A is always on and not controllable through RPMh.
+	 * So model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vreg_3p3>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8155au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vreg_3p3>;
+		vdd-s2-supply = <&vreg_3p3>;
+		vdd-s3-supply = <&vreg_3p3>;
+		vdd-s4-supply = <&vreg_3p3>;
+		vdd-s5-supply = <&vreg_3p3>;
+		vdd-s6-supply = <&vreg_3p3>;
+		vdd-s7-supply = <&vreg_3p3>;
+		vdd-s8-supply = <&vreg_3p3>;
+		vdd-s9-supply = <&vreg_3p3>;
+		vdd-s10-supply = <&vreg_3p3>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
+		vdd-l2-l10-supply = <&vreg_3p3>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p92>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+		vreg_s5a_2p04: smps5 {
+			regulator-name = "vreg_s5a_2p04";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p92: smps6 {
+			regulator-name = "vreg_s6a_0p92";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_l1a_0p752: ldo1 {
+			regulator-name = "vreg_l1a_0p752";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p072: ldo2 {
+			regulator-name = "vreg_l2a_3p072";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-name = "vreg_l3a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_usb_ss_dp_core_1:
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p96: ldo10 {
+			regulator-name = "vreg_l10a_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-name = "vreg_l11a_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_usb_hs_1p8:
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-name = "vreg_l13a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-name = "vreg_l15a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_2p96: ldo17 {
+			regulator-name = "vreg_l17a_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8155au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vreg_3p3>;
+		vdd-s2-supply = <&vreg_3p3>;
+		vdd-s3-supply = <&vreg_3p3>;
+		vdd-s4-supply = <&vreg_3p3>;
+		vdd-s5-supply = <&vreg_3p3>;
+		vdd-s6-supply = <&vreg_3p3>;
+		vdd-s7-supply = <&vreg_3p3>;
+		vdd-s8-supply = <&vreg_3p3>;
+		vdd-s9-supply = <&vreg_3p3>;
+		vdd-s10-supply = <&vreg_3p3>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
+		vdd-l2-l10-supply = <&vreg_3p3>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
+		vdd-l6-l9-supply = <&vreg_s6c_1p128>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
+		vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+		vreg_s4c_1p352: smps4 {
+			regulator-name = "vreg_s4c_1p352";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5c_2p04: smps5 {
+			regulator-name = "vreg_s5c_2p04";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6c_1p128: smps6 {
+			regulator-name = "vreg_s6c_1p128";
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_l1c_1p304: ldo1 {
+			regulator-name = "vreg_l1c_1p304";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p808: ldo2 {
+			regulator-name = "vreg_l2c_1p808";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p2: ldo5 {
+			regulator-name = "vreg_l5c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_1p8: ldo7 {
+			regulator-name = "vreg_l7c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p2: ldo8 {
+			regulator-name = "vreg_l8c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_0p8: ldo11 {
+			regulator-name = "vreg_l11c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p808: ldo12 {
+			regulator-name = "vreg_l12c_1p808";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p96: ldo13 {
+			regulator-name = "vreg_l13c_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15c_1p9: ldo15 {
+			regulator-name = "vreg_l15c_1p9";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16c_3p008: ldo16 {
+			regulator-name = "vreg_l16c_3p008";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18c_0p88: ldo18 {
+			regulator-name = "vreg_l18c_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+
+	snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 11000 70000>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_defaults>;
+
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Micrel KSZ9031RNZ PHY */
+		rgmii_phy: phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x7>;
+
+			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		snps,tx-sched-wrr;
+
+		queue0 {
+			snps,weight = <0x10>;
+			snps,dcb-algorithm;
+			snps,priority = <0x0>;
+		};
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sa8155p/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sa8155p/cdsp.mdt";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
+	vmmc-supply = <&vreg_l17a_2p96>;  /* Card power line */
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p96>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l5c_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l8c_1p2>;
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2phy_ac_en1_default>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "disabled";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2phy_ac_en2_default>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l8c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l18c_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l18c_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>;
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;		/* No pull */
+			drive-strength = <16>;	/* 16 MA */
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <16>;	/* 16 MA */
+		};
+
+		sd-cd-pins {
+			pins = "gpio96";
+			function = "gpio";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;		/* No pull */
+			drive-strength = <2>;	/* 2 MA */
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+
+		sd-cd-pins {
+			pins = "gpio96";
+			function = "gpio";
+			bias-pull-up;		/* pull up */
+			drive-strength = <2>;	/* 2 MA */
+		};
+	};
+
+	usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {
+		pins = "gpio113";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	usb2phy_ac_en2_default: usb2phy-ac-en2-default-state {
+		pins = "gpio123";
+		function = "usb2phy_ac";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ethernet_defaults: ethernet-defaults-state {
+		mdc-pins {
+			pins = "gpio7";
+			function = "rgmii";
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio59";
+			function = "rgmii";
+			bias-pull-up;
+		};
+
+		rgmii-rx-pins {
+			pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
+			function = "rgmii";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		rgmii-tx-pins {
+			pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
+			function = "rgmii";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		phy-intr-pins {
+			pins = "gpio124";
+			function = "emac_phy";
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pps-pins {
+			pins = "gpio81";
+			function = "emac_pps";
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		phy-reset-pins {
+			pins = "gpio79";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8155p.dtsi b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
new file mode 100644
index 000000000..ffb7ab695
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ *
+ * SA8155P is an automotive variant of SM8150, with some minor changes.
+ * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone,
+ * though the cmd-db doesn't reflect that and access attemps result in a bite.
+ */
+
+#include "sm8150.dtsi"
+
+&dispcc {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_dsi0 {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_dsi1 {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&mdss_mdp {
+	power-domains = <&rpmhpd SA8155P_CX>;
+};
+
+&remoteproc_slpi {
+	power-domains = <&rpmhpd SA8155P_CX>,
+			<&rpmhpd SA8155P_MX>;
+};
+
+&rpmhpd {
+	/*
+	 * The bindings were crafted such that SA8155P PDs match their
+	 * SM8150 counterparts to make it more maintainable and only
+	 * necessitate adjusting entries that actually differ
+	 */
+	compatible = "qcom,sa8155p-rpmhpd";
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
new file mode 100644
index 000000000..fd253942e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "sa8540p.dtsi"
+#include "sa8540p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8295P ADP";
+	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
+
+	aliases {
+		serial0 = &uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_phy_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_phy_out>;
+			};
+		};
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp3_phy_out>;
+			};
+		};
+	};
+
+	edp2-connector {
+		compatible = "dp-connector";
+		label = "EDP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp3-connector {
+		compatible = "dp-connector";
+		label = "EDP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp3_phy_out>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c: ldo10 {
+			regulator-name = "vreg_l10c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11g: ldo11 {
+			regulator-name = "vreg_l11g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp0_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp2_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss0_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp1_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp0_phy_out: endpoint {
+				remote-endpoint = <&dp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp0_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp1_phy_out: endpoint {
+				remote-endpoint = <&dp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp1_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp2_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp3_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	num-lanes = <2>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3b {
+	perst-gpios = <&tlmm 153 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3b_default>;
+
+	status = "okay";
+};
+
+&pcie3b_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8540p/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&ufs_card_hc {
+	reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l3c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_card_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l2c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4c>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3b_default: pcie3b-default-state {
+		clkreq-n-pins {
+			pins = "gpio152";
+			function = "pcie3b_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio153";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio130";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
new file mode 100644
index 000000000..a1fbb477f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-pmics.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmm8540a: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540a_rtc: rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			wakeup-source;
+		};
+
+		pmm8540a_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540a_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8540c: pmic@4 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540c_sdam_2: nvram@b110 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0xb110>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xb110 0xb0>;
+			status = "disabled";
+		};
+
+		pmm8540c_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540c_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8540e: pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540e_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540e_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8540g: pmic@c {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0xc SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8540g_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmm8540g_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
new file mode 100644
index 000000000..b04f72ec0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8540p.dtsi"
+#include "sa8540p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8540P Ride";
+	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c12 = &i2c12;
+		i2c15 = &i2c15;
+		i2c18 = &i2c18;
+		serial0 = &uart17;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-name = "vreg_l11a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-name = "vreg_l13a";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17c: ldo17 {
+			regulator-name = "vreg_l17c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vreg_l3g: ldo3 {
+			regulator-name = "vreg_l3g";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7g: ldo7 {
+			regulator-name = "vreg_l7g";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8g: ldo8 {
+			regulator-name = "vreg_l8g";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	snps,mtl-rx-config = <&ethernet0_mtl_rx_setup>;
+	snps,mtl-tx-config = <&ethernet0_mtl_tx_setup>;
+
+	max-speed = <1000>;
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-txid";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_default>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Marvell 88EA1512 */
+		rgmii_phy: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+
+			interrupts-extended = <&tlmm 127 IRQ_TYPE_EDGE_FALLING>;
+
+			reset-gpios = <&pmm8540c_gpios 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+
+			device_type = "ethernet-phy";
+
+			/* Set to RGMII_SGMII mode and soft reset. Turn off auto-negotiation
+			 * from userspace to talk to the switch on the SGMII side of things
+			 */
+			marvell,reg-init =
+				/* Set MODE[2:0] to RGMII_SGMII */
+				<0x12 0x14 0xfff8 0x4>,
+				/* Soft reset required after changing MODE[2:0] */
+				<0x12 0x14 0x7fff 0x8000>;
+		};
+	};
+
+	ethernet0_mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	ethernet0_mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	snps,mtl-rx-config = <&ethernet1_mtl_rx_setup>;
+	snps,mtl-tx-config = <&ethernet1_mtl_tx_setup>;
+
+	max-speed = <1000>;
+	phy-mode = "rgmii-txid";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet1_default>;
+
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	ethernet1_mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	ethernet1_mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_default>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_default>;
+
+	status = "okay";
+};
+
+&i2c12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c12_default>;
+
+	status = "okay";
+};
+
+&i2c15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c15_default>;
+
+	status = "okay";
+};
+
+&i2c18 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c18_default>;
+
+	status = "okay";
+};
+
+&pcie2a {
+	ranges = <0x01000000 0x0 0x3c200000 0x0 0x3c200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>,
+		 <0x03000000 0x5 0x00000000 0x5 0x00000000 0x1 0x00000000>;
+
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x20000000>,
+		 <0x03000000 0x6 0x00000000 0x6 0x00000000 0x2 0x00000000>;
+
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l11a>;
+	vdda-pll-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&pmm8540a_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmm8540c_sdam_2 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@a0 {
+		reg = <0xa0 0x4>;
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sa8540p/cdsp0.mbn";
+	status = "okay";
+};
+
+&remoteproc_nsp1 {
+	firmware-name = "qcom/sa8540p/cdsp1.mbn";
+	status = "okay";
+};
+
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vccq-supply = <&vreg_l6c>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		mdc-pins {
+			pins = "gpio175";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio176";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-tx-pins {
+			pins = "gpio183", "gpio184", "gpio185", "gpio186", "gpio187", "gpio188";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-rx-pins {
+			pins = "gpio177", "gpio178", "gpio179", "gpio180", "gpio181", "gpio182";
+			function = "rgmii_0";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	ethernet1_default: ethernet1-default-state {
+		mdc-pins {
+			pins = "gpio97";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio98";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-tx-pins {
+			pins = "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rgmii-rx-pins {
+			pins = "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104";
+			function = "rgmii_1";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c0_default: i2c0-default-state {
+		/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */
+		pins = "gpio135", "gpio136";
+		function = "qup0";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c1_default: i2c1-default-state {
+		/* To PM40028B-F3EI PCIe switch */
+		pins = "gpio158", "gpio159";
+		function = "qup1";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c12_default: i2c12-default-state {
+		/* To Maxim max20411 */
+		pins = "gpio0", "gpio1";
+		function = "qup12";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c15_default: i2c15-default-state {
+		/* To display connector (SIP1 only) */
+		pins = "gpio36", "gpio37";
+		function = "qup15";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	i2c18_default: i2c18-default-state {
+		/* To ASM330LHH IMU (SIP1 only) */
+		pins = "gpio66", "gpio67";
+		function = "qup18";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		perst-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		perst-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio56";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
new file mode 100644
index 000000000..96b2c59ad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include "sc8280xp.dtsi"
+
+/delete-node/ &cpu0_opp_table;
+/delete-node/ &cpu4_opp_table;
+
+/ {
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
+		};
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
+		};
+		opp-595200000 {
+			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
+		};
+		opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <(672000 * 32)>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1286400 * 32)>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1382400 * 32)>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1593600 * 32)>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1286400 * 32)>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1382400 * 32)>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1593600 * 32)>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1593600 * 32)>;
+		};
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+		opp-2592000000 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1708800 * 32)>;
+		};
+	};
+};
+
+&gpucc {
+	status = "disabled";
+};
+
+&gpu_smmu {
+	status = "disabled";
+};
+
+&pcie2a {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <0>;
+
+	interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie2b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <1>;
+
+	interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie3a {
+	compatible = "qcom,pcie-sa8540p";
+	reg = <0x0 0x01c10000 0x0 0x3000>,
+	      <0x0 0x40000000 0x0 0xf1d>,
+	      <0x0 0x40000f20 0x0 0xa8>,
+	      <0x0 0x40001000 0x0 0x1000>,
+	      <0x0 0x40100000 0x0 0x100000>;
+	reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+	ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+		 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1d00000>;
+
+	linux,pci-domain = <2>;
+
+	interrupts = <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+
+	interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+			<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pcie3b {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <3>;
+
+	interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&pcie4 {
+	compatible = "qcom,pcie-sa8540p";
+
+	linux,pci-domain = <4>;
+
+	interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "msi";
+};
+
+&rpmhpd {
+	compatible = "qcom,sa8540p-rpmhpd";
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
new file mode 100644
index 000000000..eaa43f022
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmm8654au_0_thermal: pm8775-0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_0_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_1_thermal: pm8775-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_2_thermal: pm8775-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmm8654au_3_thermal: pm8775-3-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_3_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <105000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	reboot-mode {
+		compatible = "nvmem-reboot-mode";
+		nvmem-cells = <&reboot_reason>;
+		nvmem-cell-names = "reboot-mode";
+		mode-recovery = <0x01>;
+		mode-bootloader = <0x02>;
+	};
+};
+
+&spmi_bus {
+	pmm8654au_0: pmic@0 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_0_pon: pon@1200 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1200>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pmm8654au_0_pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x12 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				debounce = <15625>;
+			};
+
+			pmm8654au_0_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x12 0x6 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				status = "disabled";
+			};
+		};
+
+		pmm8654au_0_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_0_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmm8654au_0_sdam_0: nvram@7100 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x7100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x7100 0x100>;
+
+			reboot_reason: reboot-reason@48 {
+				reg = <0x48 0x1>;
+				bits = <1 7>;
+			};
+		};
+	};
+
+	pmm8654au_1: pmic@2 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_1_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_1_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_2: pmic@4 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_2_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_2_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmm8654au_3: pmic@6 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_3_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmm8654au_3_gpios: gpio@8800 {
+			compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmm8654au_3_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
new file mode 100644
index 000000000..81a7eeb9c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -0,0 +1,832 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sa8775p.dtsi"
+#include "sa8775p-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SA8775P Ride";
+	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+		i2c11 = &i2c11;
+		i2c18 = &i2c18;
+		serial0 = &uart10;
+		serial1 = &uart12;
+		serial2 = &uart17;
+		spi16 = &spi16;
+		ufshc1 = &ufs_mem_hc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * FIXME: This should have regulator-allow-set-load but
+			 * we're getting an over-current fault from the PMIC
+			 * when switching to LPM.
+			 */
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-mode = "sgmii";
+	phy-handle = <&sgmii_phy1>;
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+		snps,tx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c11_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c18 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&qup_i2c18_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pmm8654au_0_gpios {
+	gpio-line-names = "DS_EN",
+			  "POFF_COMPLETE",
+			  "UFS0_VER_ID",
+			  "FAST_POFF",
+			  "DBU1_PON_DONE",
+			  "AOSS_SLEEP",
+			  "CAM_DES0_EN",
+			  "CAM_DES1_EN",
+			  "CAM_DES2_EN",
+			  "CAM_DES3_EN",
+			  "UEFI",
+			  "ANALOG_PON_OPT";
+};
+
+&pmm8654au_1_gpios {
+	gpio-line-names = "PMIC_C_ID0",
+			  "PMIC_C_ID1",
+			  "UFS1_VER_ID",
+			  "IPA_PWR",
+			  "",
+			  "WLAN_DBU4_EN",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "USB2_PWR_EN",
+			  "USB2_FAULT";
+
+	usb2_en_state: usb2-en-state {
+		pins = "gpio9";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_2_gpios {
+	gpio-line-names = "PMIC_E_ID0",
+			  "PMIC_E_ID1",
+			  "USB0_PWR_EN",
+			  "USB0_FAULT",
+			  "SENSOR_IRQ_1",
+			  "SENSOR_IRQ_2",
+			  "SENSOR_RST",
+			  "SGMIIO0_RST",
+			  "SGMIIO1_RST",
+			  "USB1_PWR_ENABLE",
+			  "USB1_FAULT",
+			  "VMON_SPX8";
+
+	usb0_en_state: usb0-en-state {
+		pins = "gpio3";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+
+	usb1_en_state: usb1-en-state {
+		pins = "gpio10";
+		function = "normal";
+		output-high;
+		power-source = <0>;
+	};
+};
+
+&pmm8654au_3_gpios {
+	gpio-line-names = "PMIC_G_ID0",
+			  "PMIC_G_ID1",
+			  "GNSS_RST",
+			  "GNSS_EN",
+			  "GNSS_BOOT_MODE";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&serdes1 {
+	phy-supply = <&vreg_l5a>;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&spi16 {
+	pinctrl-0 = <&qup_spi16_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_uart10_default: qup-uart10-state {
+		pins = "gpio46", "gpio47";
+		function = "qup1_se3";
+	};
+
+	qup_spi16_default: qup-spi16-state {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		function = "qup2_se2";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
+	qup_i2c11_default: qup-i2c11-state {
+		pins = "gpio48", "gpio49";
+		function = "qup1_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c18_default: qup-i2c18-state {
+		pins = "gpio95", "gpio96";
+		function = "qup2_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart12_default: qup-uart12-state {
+		qup_uart12_cts: qup-uart12-cts-pins {
+			pins = "gpio52";
+			function = "qup1_se5";
+			bias-disable;
+		};
+
+		qup_uart12_rts: qup-uart12-rts-pins {
+			pins = "gpio53";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+
+		qup_uart12_tx: qup-uart12-tx-pins {
+			pins = "gpio54";
+			function = "qup1_se5";
+			bias-pull-up;
+		};
+
+		qup_uart12_rx: qup-uart12-rx-pins {
+			pins = "gpio55";
+			function = "qup1_se5";
+			bias-pull-down;
+		};
+	};
+
+	qup_uart17_default: qup-uart17-state {
+		qup_uart17_cts: qup-uart17-cts-pins {
+			pins = "gpio91";
+			function = "qup2_se3";
+			bias-disable;
+		};
+
+		qup_uart17_rts: qup0-uart17-rts-pins {
+			pins = "gpio92";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+
+		qup_uart17_tx: qup0-uart17-tx-pins {
+			pins = "gpio93";
+			function = "qup2_se3";
+			bias-pull-up;
+		};
+
+		qup_uart17_rx: qup0-uart17-rx-pins {
+			pins = "gpio94";
+			function = "qup2_se3";
+			bias-pull-down;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart12 {
+	pinctrl-0 = <&qup_uart12_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart17 {
+	pinctrl-0 = <&qup_uart17_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_state>;
+
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_state>;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_en_state>;
+
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
new file mode 100644
index 000000000..d4ca92b98
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -0,0 +1,2603 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
+#include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@10000 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10000>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+				L3_1: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+
+			};
+		};
+
+		CPU5: cpu@10100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10100>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_5>;
+			L2_5: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		CPU6: cpu@10200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10200>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_6>;
+			L2_6: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		CPU7: cpu@10300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x10300>;
+			enable-method = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			next-level-cache = <&L2_7>;
+			L2_7: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_1>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sa8775p", "qcom,scm";
+		};
+	};
+
+	aggre1_noc: interconnect-aggre1-noc {
+		compatible = "qcom,sa8775p-aggre1-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	aggre2_noc: interconnect-aggre2-noc {
+		compatible = "qcom,sa8775p-aggre2-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	clk_virt: interconnect-clk-virt {
+		compatible = "qcom,sa8775p-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	config_noc: interconnect-config-noc {
+		compatible = "qcom,sa8775p-config-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	dc_noc: interconnect-dc-noc {
+		compatible = "qcom,sa8775p-dc-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gem_noc: interconnect-gem-noc {
+		compatible = "qcom,sa8775p-gem-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gpdsp_anoc: interconnect-gpdsp-anoc {
+		compatible = "qcom,sa8775p-gpdsp-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	lpass_ag_noc: interconnect-lpass-ag-noc {
+		compatible = "qcom,sa8775p-lpass-ag-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sa8775p-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mmss_noc: interconnect-mmss-noc {
+		compatible = "qcom,sa8775p-mmss-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspa_noc: interconnect-nspa-noc {
+		compatible = "qcom,sa8775p-nspa-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspb_noc: interconnect-nspb-noc {
+		compatible = "qcom,sa8775p-nspb-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	pcie_anoc: interconnect-pcie-anoc {
+		compatible = "qcom,sa8775p-pcie-anoc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	system_noc: interconnect-system-noc {
+		compatible = "qcom,sa8775p-system-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	/* Will be updated by the bootloader. */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sail_ss_mem: sail-ss@80000000 {
+			reg = <0x0 0x80000000 0x0 0x10000000>;
+			no-map;
+		};
+
+		hyp_mem: hyp@90000000 {
+			reg = <0x0 0x90000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_boot_mem: xbl-boot@90600000 {
+			reg = <0x0 0x90600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@90800000 {
+			reg = <0x0 0x90800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@90860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x90860000 0x0 0x20000>;
+			no-map;
+		};
+
+		uefi_log: uefi-log@908b0000 {
+			reg = <0x0 0x908b0000 0x0 0x10000>;
+			no-map;
+		};
+
+		reserved_mem: reserved@908f0000 {
+			reg = <0x0 0x908f0000 0x0 0xf000>;
+			no-map;
+		};
+
+		secdata_apss_mem: secdata-apss@908ff000 {
+			reg = <0x0 0x908ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: smem@90900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x90900000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		cpucp_fw_mem: cpucp-fw@90b00000 {
+			reg = <0x0 0x90b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
+			reg = <0x0 0x93b00000 0x0 0xf00000>;
+			no-map;
+		};
+
+		adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95c00000 {
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99900000 {
+			reg = <0x0 0x99900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b800000 {
+			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d600000 {
+			reg = <0x0 0x9d600000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d700000 {
+			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9fc00000 {
+			reg = <0x0 0x9fc00000 0x0 0x700000>;
+			no-map;
+		};
+
+		hyptz_reserved_mem: hyptz-reserved@beb00000 {
+			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@d0100000 {
+			reg = <0x0 0xd0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@d1300000 {
+			reg = <0x0 0xd1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1800000 {
+			reg = <0x0 0xd1800000 0x0 0x3900000>;
+			no-map;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sa8775p-gcc";
+			reg = <0x0 0x00100000 0x0 0xc7018>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_0_qmpphy>,
+				 <&usb_1_qmpphy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
+			reg = <0x0 0x00408000 0x0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			ranges;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x880000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x880000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x884000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x888000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x88c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x890000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x894000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x894000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c20: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x898000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi20: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x898000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x9c0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x403 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x980000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x984000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x988000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x98c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x990000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x994000 0x0 0x4000>;
+				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x443 0x0>;
+			status = "disabled";
+
+			i2c7: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi7: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi8: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa84000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi9: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart9: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0xa88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi10: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa8c000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart10: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0
+						 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0
+						 &config_noc SLAVE_QUP_1 0>;
+				power-domains = <&rpmhpd SA8775P_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi11: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa90000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi12: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xa94000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			uart12: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core", "qup-config";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xa98000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+						<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
+						 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config",
+						     "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_3: geniqup@bc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0xbc0000 0x0 0x6000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
+				<&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c21: i2c@b80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+							 "qup-config",
+							 "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+
+			spi21: spi@b80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0xb80000 0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
+				clock-names = "se";
+				interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
+						&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
+					   <&aggre1_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
+						&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+							 "qup-config",
+							 "qup-memory";
+				power-domains = <&rpmhpd SA8775P_CX>;
+				status = "disabled";
+			};
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+			iommus = <&apps_smmu 0x100 0x0>;
+			dma-coherent;
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sa8775p-qmp-ufs-phy";
+			reg = <0x0 0x01d87000 0x0 0xe10>;
+			/*
+			 * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
+			 * enables the CXO clock to eDP *and* UFS PHY.
+			 */
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_EDP_REF_CLKREF_EN>;
+			clock-names = "ref", "ref_aux", "qref";
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb_0_hsphy: phy@88e4000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e4000 0 0x120>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@88e8000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088e8000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_prim_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_0: usb@a6f8800 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_0_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x080 0x0>;
+				phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_1_hsphy: phy@88e6000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e6000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@88ea000 {
+			compatible = "qcom,sa8775p-qmp-usb3-uni-phy";
+			reg = <0 0x088ea000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_sec_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a8f8800 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xe000>;
+				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0a0 0x0>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2_hsphy: phy@88e7000 {
+			compatible = "qcom,sa8775p-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x120>;
+			clocks = <&gcc GCC_USB_CLKREF_EN>;
+			clock-names = "ref";
+			resets = <&gcc GCC_USB3_PHY_TERT_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2: usb@a4f8800 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
+			reg = <0 0x0a4f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc USB20_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB20_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a400000 0 0xe000>;
+				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x020 0x0>;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sa8775p-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serdes0: phy@8901000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08901000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		serdes1: phy@8902000 {
+			compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+			reg = <0x0 0x08902000 0x0 0xe10>;
+			clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+			clock-names = "sgmi_ref";
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
+			reg = <0x0 0x0b220000 0x0 0x30000>,
+			      <0x0 0x17c000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 2>,
+					  <70 520 1>,
+					  <73 523 1>,
+					  <118 568 6>,
+					  <124 609 3>,
+					  <159 638 1>,
+					  <160 720 3>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 2>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 2>,
+					  <228 440 1>,
+					  <229 663 1>,
+					  <230 524 2>,
+					  <232 612 3>,
+					  <235 723 5>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+					       IPCC_MPROC_SIGNAL_GLINK_QMP
+					       IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+			#clock-cells = <0>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			qcom,channel = <0>;
+			qcom,ee = <0>;
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,sa8775p-tlmm";
+			reg = <0x0 0x0f000000 0x0 0x1000000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 149>;
+			wakeup-parent = <&pdc>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie_smmu: iommu@15200000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15200000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+
+			interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt";
+			reg = <0x0 0x17c10000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		memtimer: timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c27000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>,
+					  <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>,
+					  <CONTROL_TCS 0>;
+			label = "apps_rsc";
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sa8775p-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sa8775p-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-0 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sa8775p-cpufreq-epss",
+				     "qcom,cpufreq-epss";
+			reg = <0x0 0x18591000 0x0 0x1000>,
+			      <0x0 0x18593000 0x0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+			      <0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC1_PTP_CLK>,
+				 <&gcc GCC_EMAC1_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			power-domains = <&gcc EMAC1_GDSC>;
+
+			phys = <&serdes1>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+
+		ethernet0: ethernet@23040000 {
+			compatible = "qcom,sa8775p-ethqos";
+			reg = <0x0 0x23040000 0x0 0x10000>,
+			      <0x0 0x23056000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_PHY_AUX_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "phyaux";
+
+			power-domains = <&gcc EMAC0_GDSC>;
+
+			phys = <&serdes0>;
+			phy-names = "serdes";
+
+			iommus = <&apps_smmu 0x120 0xf>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <16384>;
+
+			status = "disabled";
+		};
+	};
+
+	arch_timer: timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pcie0: pci@1c00000{
+		compatible = "qcom,pcie-sa8775p";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40100000 0x0 0x100000>,
+		      <0x0 0x01c03000 0x0 0x1000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+			 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+		bus-range = <0x00 0xff>;
+
+		dma-coherent;
+
+		linux,pci-domain = <0>;
+		num-lanes = <2>;
+
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0", "msi1", "msi2", "msi3",
+				  "msi4", "msi5", "msi6", "msi7";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+			    <0x100 &pcie_smmu 0x0001 0x1>;
+
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "pci";
+		power-domains = <&gcc PCIE_0_GDSC>;
+
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+
+		status = "disabled";
+	};
+
+	pcie0_phy: phy@1c04000 {
+		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
+		reg = <0x0 0x1c04000 0x0 0x2000>;
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_0_PIPE_CLK>,
+			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
+			 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
+
+		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
+			      "pipediv2", "phy_aux";
+
+		assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+		reset-names = "phy";
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie_0_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+
+	pcie1: pci@1c10000{
+		compatible = "qcom,pcie-sa8775p";
+		reg = <0x0 0x01c10000 0x0 0x3000>,
+		      <0x0 0x60000000 0x0 0xf20>,
+		      <0x0 0x60000f20 0x0 0xa8>,
+		      <0x0 0x60001000 0x0 0x4000>,
+		      <0x0 0x60100000 0x0 0x100000>,
+		      <0x0 0x01c13000 0x0 0x1000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+			 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>;
+		bus-range = <0x00 0xff>;
+
+		dma-coherent;
+
+		linux,pci-domain = <1>;
+		num-lanes = <4>;
+
+		interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi0", "msi1", "msi2", "msi3",
+				  "msi4", "msi5", "msi6", "msi7";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+			 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		interconnects = <&pcie_anoc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_1 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
+			    <0x100 &pcie_smmu 0x0081 0x1>;
+
+		resets = <&gcc GCC_PCIE_1_BCR>;
+		reset-names = "pci";
+		power-domains = <&gcc PCIE_1_GDSC>;
+
+		phys = <&pcie1_phy>;
+		phy-names = "pciephy";
+
+		status = "disabled";
+	};
+
+	pcie1_phy: phy@1c14000 {
+		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+		reg = <0x0 0x1c14000 0x0 0x4000>;
+
+		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_1_PIPE_CLK>,
+			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
+			 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
+
+		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
+			      "pipediv2", "phy_aux";
+
+		assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>;
+
+		resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+		reset-names = "phy";
+
+		#clock-cells = <0>;
+		clock-output-names = "pcie_1_pipe_clk";
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
new file mode 100644
index 000000000..3342cb048
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7180.dtsi"
+
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/delete-node/ &tz_mem;
+/delete-node/ &ipa_fw_mem;
+
+/ {
+	model = "Acer Aspire 1";
+	compatible = "acer,aspire1", "qcom,sc7180";
+	chassis-type = "laptop";
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		zap_mem: zap-shader@80840000 {
+			reg = <0x0 0x80840000 0 0x2000>;
+			no-map;
+		};
+
+		venus_mem: venus@85b00000 {
+			reg = <0x0 0x85b00000 0 0x500000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@86000000 {
+			reg = <0x0 0x86000000 0x0 0x2000000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8e400000 {
+			reg = <0x0 0x8e400000 0x0 0x2800000>;
+			no-map;
+		};
+
+		wlan_mem: wlan@93900000 {
+			reg = <0x0 0x93900000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	max98357a: audio-codec {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&amp_sd_mode_default>;
+		pinctrl-names = "default";
+
+		#sound-dai-cells = <0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86_bridge 1000000>;
+		enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&soc_bkoff_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_brij_1p2: bridge-1p2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "brij_1p2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_edp_1p2_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_brij_1p8: bridge-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "brij_1p8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&vreg_l8c_1p8>;
+
+		gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_edp_1p8_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_codec_3p3: codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "codec_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_audio_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_lcm_3p3: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcm_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_lcm_en_default>;
+		pinctrl-names = "default";
+	};
+
+	reg_tp_3p3: touchpad-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "tp_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&reg_tp_en_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* embedded-controller@76 */
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/*
+	 * NOTE: DSDT defines two possible touchpads, other one is
+	 *
+	 * reg = <0x15>;
+	 * hid-descr-addr = <0x1>;
+	 */
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		vdd-supply = <&reg_tp_3p3>;
+
+		interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hid_touchpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hid_keyboard_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		pinctrl-0 = <&codec_irq_default>;
+		pinctrl-names = "default";
+
+		AVDD-supply = <&vreg_l15a_1p8>;
+		MICVDD-supply = <&reg_codec_3p3>;
+		VBAT-supply = <&reg_codec_3p3>;
+		DBVDD-supply = <&vreg_l15a_1p8>;
+		LDO1-IN-supply = <&vreg_l15a_1p8>;
+
+		/*
+		 * NOTE: The board has a path from this codec to the
+		 * DMIC microphones in the lid, however some of the option
+		 * resistors are absent and the microphones are connected
+		 * to the SoC instead.
+		 *
+		 * If the resistors were to be changed by the user to
+		 * connect the codec, the following could be used:
+		 *
+		 * realtek,dmic1-data-pin = <1>;
+		 * realtek,dmic1-clk-pin = <1>;
+		 */
+
+		realtek,jd-src = <1>;
+	};
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sn65dsi86_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#pwm-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&bridge_en_default>,
+			    <&edp_bridge_irq_default>,
+			    <&bridge_suspend_default>;
+		pinctrl-names = "default";
+
+		vpll-supply = <&reg_brij_1p8>;
+		vccio-supply = <&reg_brij_1p8>;
+		vcca-supply = <&reg_brij_1p2>;
+		vcc-supply = <&reg_brij_1p2>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+		clock-names = "refclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sn65dsi86_out: endpoint {
+					data-lanes = <0 1>;
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "edp-panel";
+				power-supply = <&reg_lcm_3p3>;
+				backlight = <&backlight>;
+				hpd-absent-delay-ms = <200>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&zap_mem>;
+		firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3c_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l4a_0p8>;
+	status = "okay";
+};
+
+&pm6150_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "thermistor";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "charger_thermistor";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	charger-thermistor@0 {
+		reg = <0>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6150_pon {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_default>;
+	pinctrl-1 = <&sdc1_sleep>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l19a_2p9>;
+	vqmmc-supply = <&vreg_l12a_1p8>;
+
+	status = "okay";
+};
+
+&uart3 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart3_sleep>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3991-bt";
+		vddio-supply = <&vreg_l10a_1p8>;
+		vddxo-supply = <&vreg_l1c_1p8>;
+		vddrf-supply = <&vreg_l2c_1p3>;
+		vddch0-supply = <&vreg_l10c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l4a_0p8>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l4a_0p8>;
+
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
+
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_l4a_0p8: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_0p6: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p8: ldo18 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_2p9: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&qup_i2c2_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c4_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c9_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&tlmm {
+	/*
+	 * The TZ seem to protect those because some boards can have
+	 * fingerprint sensor connected to this range. Not connected
+	 * on this board
+	 */
+	gpio-reserved-ranges = <58 5>;
+
+	amp_sd_mode_default: amp-sd-mode-deault-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	bridge_en_default: bridge-en-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	bridge_suspend_default: bridge-suspend-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	codec_irq_default: codec-irq-deault-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_bridge_irq_default: edp-bridge-irq-default-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	hid_keyboard_default: hid-keyboard-default-state {
+		pins = "gpio33";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hid_touchpad_default: hid-touchpad-default-state {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		rts-pins {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		tx-pins {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		rx-pins {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
+		pins = "gpio19";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	reg_lcm_en_default: reg-lcm-en-deault-state {
+		pins = "gpio26";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	reg_audio_en_default: reg-audio-en-deault-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	reg_tp_en_default: reg-tp-en-deault-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	soc_bkoff_default: soc-bkoff-deault-state {
+		pins = "gpio10";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	sdc1_default: sdc1-default-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_sleep: sdc1-sleep-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
new file mode 100644
index 000000000..ee35a454d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-firmware-tfa.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Devices that use SC7180 with TrustedFirmware-A
+ * need PSCI PC mode instead of the OSI mode provided
+ * by Qualcomm firmware.
+ */
+
+&CPU0 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU1 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU2 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU3 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU4 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU5 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU6 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU7 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+/delete-node/ &domain_idle_states;
+
+&idle_states {
+	CLUSTER_SLEEP_0: cluster-sleep-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "cluster-power-down";
+		arm,psci-suspend-param = <0x40003444>;
+		entry-latency-us = <3263>;
+		exit-latency-us = <6562>;
+		min-residency-us = <9926>;
+		local-timer-stop;
+	};
+};
+
+/delete-node/ &CPU_PD0;
+/delete-node/ &CPU_PD1;
+/delete-node/ &CPU_PD2;
+/delete-node/ &CPU_PD3;
+/delete-node/ &CPU_PD4;
+/delete-node/ &CPU_PD5;
+/delete-node/ &CPU_PD6;
+/delete-node/ &CPU_PD7;
+/delete-node/ &CLUSTER_PD;
+
+&apps_rsc {
+	/delete-property/ power-domains;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
new file mode 100644
index 000000000..0146fb003
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 IDP board device tree source
+ *
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sc7180.dtsi"
+#include "sc7180-firmware-tfa.dtsi"
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SC7180 IDP";
+	compatible = "qcom,sc7180-idp", "qcom,sc7180";
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ *
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x94600000 0x0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		atf_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x8c00000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ec00000 {
+			reg = <0x0 0x8ec00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8f600000 {
+			reg = <0 0x8f600000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		mba_mem: memory@94400000 {
+			reg = <0x0 0x94400000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s4a_1p0: smps4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1744000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_l1a_1p2: ldo1 {
+			regulator-min-microvolt = <1178000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <968000>;
+			regulator-max-microvolt = <1064000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4a_0p8: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_2p7: ldo5 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p6: ldo6 {
+			regulator-min-microvolt = <568000>;
+			regulator-max-microvolt = <648000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p6: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1728000>;
+			regulator-max-microvolt = <1832000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1696000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_2p8: ldo18 {
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l19a_2p9: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1144000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	vdda-supply = <&vreg_l3c_1p2>;
+
+	panel@0 {
+		compatible = "visionox,rm69299-1080p-display";
+		reg = <0>;
+
+		vdda-supply = <&vreg_l8c_1p8>;
+		vdd3p3-supply = <&vreg_l18a_2p8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&disp_pins>;
+
+		reset-gpios = <&pm6150l_gpios 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&panel0_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l4a_0p8>;
+};
+
+&qfprom {
+	vcc-supply = <&vreg_l11a_1p8>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7180-mss-pil";
+	reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_NAV_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
+
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+	memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+	qcom,spare-regs = <&tcsr_regs_2 0xb3e4>;
+};
+
+&scm {
+	/* TF-A firmware maps memory cached so mark dma-coherent to match. */
+	dma-coherent;
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	vmmc-supply = <&vreg_l19a_2p9>;
+	vqmmc-supply = <&vreg_l12a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default","sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+&uart3 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart3_sleep>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&vreg_l10a_1p8>;
+		vddxo-supply = <&vreg_l1c_1p8>;
+		vddrf-supply = <&vreg_l2c_1p3>;
+		vddch0-supply = <&vreg_l10c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vreg_l4a_0p8>;
+	vdda-pll-supply = <&vreg_l11a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l4a_0p8>;
+};
+
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&pm6150l_gpios {
+	disp_pins: disp-state {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_FUNC1;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
+			power-source = <0>;
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&qspi_clk {
+	bias-disable;
+};
+
+&qspi_cs0 {
+	bias-disable;
+};
+
+&qspi_data0 {
+	bias-pull-up;
+};
+
+&qspi_data1 {
+	bias-pull-up;
+};
+
+&qup_i2c2_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c4_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c7_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c9_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
+
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi0_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		rts-pins {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		tx-pins {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		rx-pins {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
new file mode 100644
index 000000000..4b306a59d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-lite.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 lite device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+&cpu6_opp10 {
+	opp-peak-kBps = <7216000 22425600>;
+};
+
+&cpu6_opp11 {
+	opp-peak-kBps = <7216000 22425600>;
+};
+
+&cpu6_opp12 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp13 {
+	opp-peak-kBps = <8532000 23347200>;
+};
+
+&cpu6_opp14 {
+	opp-peak-kBps = <8532000 23347200>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
new file mode 100644
index 000000000..82dc00cc7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google CoachZ (rev1 - 2) with LTE";
+	compatible = "google,coachz-rev1-sku0", "google,coachz-rev2-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+	label = "proximity-wifi-lte";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
new file mode 100644
index 000000000..03d350dce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+	model = "Google CoachZ (rev1 - 2)";
+	compatible = "google,coachz-rev1", "google,coachz-rev2", "qcom,sc7180";
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4e;
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	status = "disabled";
+
+	/delete-node/ charger-thermistor@0;
+	/delete-node/ skin-temp-thermistor@1;
+};
+
+/*
+ * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
+ * which currently is not supported by the PM6150 ADC driver. Disable the
+ * skin temperature thermal zone to avoid using bogus temperature values.
+ */
+&skin_temp_thermal {
+	status = "disabled";
+};
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "FP_TO_AP_IRQ_L",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "WLC_IRQ",
+			  "FP_RST_L",
+			  "AMP_EN",
+			  "WLC_NRST",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "EN_PP3300_DX_EDP",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "FPMCU_SEL",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "DMIC_CLK_EN",
+			  "HUB_EN",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
new file mode 100644
index 000000000..d23409034
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3-lte.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-coachz-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google CoachZ (rev3+) with LTE";
+	compatible = "google,coachz-sku0", "qcom,sc7180";
+};
+
+&cros_ec_proximity {
+	label = "proximity-wifi-lte";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
new file mode 100644
index 000000000..a02d2d57c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-coachz.dtsi"
+
+/ {
+	model = "Google CoachZ (rev3+)";
+	compatible = "google,coachz", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
new file mode 100644
index 000000000..a532cc4aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google CoachZ board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+
+/* Deleted nodes from sc7180-trogdor.dtsi */
+
+/delete-node/ &alc5682;
+/delete-node/ &pp3300_codec;
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	adau7002: audio-codec-1 {
+		compatible = "adi,adau7002";
+		IOVDD-supply = <&pp1800_l15a>;
+		wakeup-delay-ms = <80>;
+		#sound-dai-cells = <0>;
+	};
+
+	thermal-zones {
+		skin_temp_thermal: skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+			sustainable-power = <965>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <42000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <45000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <60000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ap_spi_fp {
+	status = "okay";
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+
+	cros_ec_proximity: proximity {
+		compatible = "google,cros-ec-mkbp-proximity";
+		label = "proximity-wifi";
+	};
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&i2c9 {
+	status = "disabled";
+};
+
+&panel {
+	compatible = "boe,nv110wtm-n61";
+};
+
+&pm6150_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	skin-temp-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&sn65dsi86_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&sound {
+	compatible = "google,sc7180-coachz";
+	model = "sc7180-adau7002-max98357a";
+	audio-routing = "PDM_DAT", "DMIC";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_clk_en>;
+};
+
+&sound_multimedia0_codec {
+	sound-dai = <&adau7002>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+&ts_reset_l {
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "FP_TO_AP_IRQ_L",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "WLC_IRQ",
+			  "FP_RST_L",
+			  "AMP_EN",
+			  "WLC_NRST",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "",
+			  "HUB_EN",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	dmic_clk_en: dmic-clk-en-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
new file mode 100644
index 000000000..d9e905ed4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev2)";
+	compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180";
+};
+
+&panel {
+	/delete-property/hpd-gpios;
+	no-hpd;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
new file mode 100644
index 000000000..242c178fd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev3)";
+	compatible = "google,homestar-rev3", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
new file mode 100644
index 000000000..66dd87016
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-homestar.dtsi"
+
+/ {
+	model = "Google Homestar (rev4+)";
+	compatible = "google,homestar", "qcom,sc7180";
+};
+
+&pp3300_brij_ps8640 {
+	regulator-enable-ramp-delay = <4000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
new file mode 100644
index 000000000..b27dcd2ec
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Homestar board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	max98360a_1: amplifier-1 {
+		compatible = "maxim,max98360a";
+		#sound-dai-cells = <0>;
+	};
+
+	max98360a_2: amplifier-2 {
+		compatible = "maxim,max98360a";
+		#sound-dai-cells = <0>;
+	};
+
+	max98360a_3: amplifier-3 {
+		compatible = "maxim,max98360a";
+		#sound-dai-cells = <0>;
+	};
+
+	pp3300_touch: pp3300-touch-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_touch";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_touch>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	thermal-zones {
+		skin_temp_thermal: skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+			sustainable-power = <965>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_dx_edp {
+	/*
+	 * The atna33xc20 really likes to be power cycled to keep it from
+	 * getting in a bad state. This is the reason that the touchscreen
+	 * rail and eDP rails are separate from each other on homestar (but
+	 * not other trogdor devices) Make sure it starts "off" at bootup.
+	 */
+	/delete-property/ regulator-boot-on;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@14 {
+		compatible = "goodix,gt7375p";
+		reg = <0x14>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&pp3300_touch>;
+	};
+};
+
+/* Panel controls backlight over aux channel */
+
+&backlight {
+	status = "disabled";
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&panel {
+	compatible = "samsung,atna33xc20";
+	enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+	/delete-property/ backlight;
+};
+
+&pm6150_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	skin-temp-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&secondary_mi2s {
+	qcom,playback-sd-lines = <0 1>;
+};
+
+&sound_multimedia1_codec {
+	sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_HOMESTAR";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+&sec_mi2s_active {
+	pins = "gpio49", "gpio50", "gpio51", "gpio52";
+};
+
+&ts_reset_l {
+	/*
+	 * We want reset state by default and it will be up to the
+	 * driver to disable this when it's ready.
+	 */
+	output-low;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "AVEE_LCD_EN",
+			  "",
+			  "AMP_EN",
+			  "AMP_EN2",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "SEL_LCM",
+			  "HP_IRQ",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+			  "BT_UART_TXD",
+			  "BT_UART_RXD",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "AMP_DIN_2",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "WLAN_SW_CTRL",
+			  "",
+			  "REPORT_E",
+			  "VDD_RESET_1.8V",
+			  "ID0",
+			  "",
+			  "ID1",
+			  "AVDD_LCD_EN",
+			  "MIPI_1.8V_EN",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "PP1800_MIPI_SW_EN",
+			  "EN_PP3300_TOUCH",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "",
+			  "BOOT_CONFIG_4",
+			  "BOOT_CONFIG_2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "BOOT_CONFIG_3",
+			  "WCI2_LTE_COEX_TXD",
+			  "WCI2_LTE_COEX_RXD",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT_POL",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	en_pp3300_touch: en-pp3300-touch-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
new file mode 100644
index 000000000..36326ef97
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-kingoftown.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Kingoftown board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Kingoftown";
+	compatible = "google,kingoftown", "qcom,sc7180";
+};
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)       /* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)       /* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)       /* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)       /* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)       /* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)       /* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)       /* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)       /* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)       /* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)       /* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_KINGOFTOWN";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "TP_INT_L",		/* 0 */
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",			/* 10 */
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",			/* 20 */
+			  "",
+			  "",
+			  "AMP_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "HP_IRQ",
+			  "",
+			  "",			/* 30 */
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+			  "BT_UART_TXD",	/* 40 */
+			  "BT_UART_RXD",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",		/* 50 */
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",	/* 60 */
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",			/* 70 */
+			  "",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",		/* 80 */
+			  "UIM1_RST",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",		/* 90 */
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",			/* 100 */
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",			/* 110 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
new file mode 100644
index 000000000..70d5a7aa8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r4.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-limozeen-nots-r5.dts"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev4)";
+	compatible = "google,lazor-rev4-sku5", "qcom,sc7180";
+};
+
+/*
+ * rev4-sku5 was built with a different trackpad.
+ */
+/delete-node/&trackpad;
+&ap_tp_i2c {
+	 trackpad: trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pp3300_fp_tp>;
+		hid-descr-addr = <0x20>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
new file mode 100644
index 000000000..7f01573b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev5 - rev8)";
+	/* No sku5 post-rev5 */
+	compatible = "google,lazor-rev5-sku5", "google,lazor-rev5-sku6",
+		"google,lazor-rev6-sku6", "google,lazor-rev7-sku6",
+		"google,lazor-rev8-sku6", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&panel {
+	compatible = "innolux,n116bca-ea1";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
new file mode 100644
index 000000000..913b5fc3b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen without Touchscreen (rev9+)";
+	compatible = "google,lazor-sku6", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
new file mode 100644
index 000000000..d42dcd421
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen (rev4 - rev8)";
+	compatible = "google,lazor-rev4-sku4", "google,lazor-rev5-sku4",
+		"google,lazor-rev6-sku4", "google,lazor-rev7-sku4",
+		"google,lazor-rev8-sku4", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&ap_ts_pen_1v8 {
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
new file mode 100644
index 000000000..15d77dc5f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor Limozeen board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor Limozeen (rev9+)";
+	compatible = "google,lazor-sku4", "qcom,sc7180";
+};
+
+/delete-node/&ap_ts;
+
+&ap_ts_pen_1v8 {
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
new file mode 100644
index 000000000..919bfaea6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-kb.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+
+/ {
+	model = "Google Lazor (rev1 - 2) with KB Backlight";
+	compatible = "google,lazor-rev1-sku2", "google,lazor-rev2-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
new file mode 100644
index 000000000..eb20157f6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-lazor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev1 - 2) with LTE";
+	compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
new file mode 100644
index 000000000..80c7108bc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+
+/ {
+	model = "Google Lazor (rev1 - 2)";
+	compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
+};
+
+
+&usb_hub_2_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
new file mode 100644
index 000000000..6ff81c1f7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev3 - 8) with KB Backlight";
+	compatible = "google,lazor-rev3-sku2", "google,lazor-rev4-sku2",
+		"google,lazor-rev5-sku2", "google,lazor-rev6-sku2",
+		"google,lazor-rev7-sku2", "google,lazor-rev8-sku2",
+		"qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
new file mode 100644
index 000000000..e58e36e35
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev3 - 8) with LTE";
+	compatible = "google,lazor-rev3-sku0", "google,lazor-rev4-sku0",
+		"google,lazor-rev5-sku0", "google,lazor-rev6-sku0",
+		"google,lazor-rev7-sku0", "google,lazor-rev8-sku0",
+		"qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
new file mode 100644
index 000000000..76c83f88c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev3 - 8)";
+	compatible = "google,lazor-rev3", "google,lazor-rev4",
+		"google,lazor-rev5", "google,lazor-rev6", "google,lazor-rev7",
+		"google,lazor-rev8", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
new file mode 100644
index 000000000..960f7b7ce
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+) with KB Backlight";
+	compatible = "google,lazor-sku2", "qcom,sc7180";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
new file mode 100644
index 000000000..38027f13b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+) with LTE";
+	compatible = "google,lazor-sku0", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&keyboard_backlight {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
new file mode 100644
index 000000000..56dd22265
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-lazor.dtsi"
+#include "sc7180-lite.dtsi"
+
+/ {
+	model = "Google Lazor (rev9+)";
+	compatible = "google,lazor", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
new file mode 100644
index 000000000..13339b723
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Lazor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
+
+&ap_sar_sensor {
+	semtech,cs0-ground;
+	semtech,combined-sensors = <3>;
+	semtech,resolution = "fine";
+	semtech,startup-sensor = <0>;
+	semtech,proxraw-strength = <8>;
+	semtech,avg-pos-strength = <64>;
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&panel {
+	compatible = "boe,nv133fhm-n62";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	status = "disabled";
+
+	/delete-node/ charger-thermistor@0;
+};
+
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_LAZOR";
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+	pins = "gpio58";
+};
+
+&ts_reset_l {
+	/* This pin is not connected on -rev0, pull up to park. */
+	/delete-property/bias-disable;
+	bias-pull-up;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "",
+			  "",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "AP_RAM_ID2",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "AP_RAM_ID1",
+			  "AP_SKU_ID2",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "AP_RAM_ID0",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "TRACKPAD_INT_1V8_ODL",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "DBG_SPI_HOLD_L",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "AP_SKU_ID0",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
new file mode 100644
index 000000000..bffcbd141
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for LTE SKUs
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+&ap_sar_sensor {
+	label = "proximity-wifi-lte";
+};
+
+&mpss_mem {
+	reg = <0x0 0x86000000 0x0 0x8c00000>;
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn",
+			"qcom/sc7180-trogdor/modem/qdsp6sw.mbn";
+};
+
+&ipa {
+	/*
+	 * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the
+	 * modem needs to cover certain init steps (GSI init), and
+	 * the AP needs to wait for it.
+	 */
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
new file mode 100644
index 000000000..bede23369
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pp3300_brij_ps8640: pp3300-brij-ps8640-regulator {
+		compatible = "regulator-fixed";
+		status = "okay";
+		regulator-name = "pp3300_brij_ps8640";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_edp_brij_ps8640>;
+
+		vin-supply = <&pp3300_a>;
+	};
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_dx_edp {
+	off-on-delay-us = <500000>;
+
+	/*
+	 * It's nicer to start with this regulator enabled. The
+	 * bootloader may have left it on and it's nice not to cause an
+	 * extra power cycle of the touchscreen and eDP panel at bootup.
+	 * This should help speed bootup because we have off-on-delay-us.
+	 */
+	regulator-boot-on;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+edp_brij_i2c: &i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ps8640_bridge: bridge@8 {
+		compatible = "parade,ps8640";
+		reg = <0x8>;
+
+		powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>;
+
+		vdd12-supply = <&pp1200_brij>;
+		vdd33-supply = <&pp3300_brij_ps8640>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				ps8640_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ps8640_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				/* Compatible will be filled in per-board */
+				power-supply = <&pp3300_dx_edp>;
+				backlight = <&backlight>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&ps8640_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&ps8640_in>;
+};
+
+&tlmm {
+	edp_brij_ps8640_rst: edp-brij-ps8640-rst-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_edp_brij_ps8640: en-pp3300-edp-brij-ps8640-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
new file mode 100644
index 000000000..767cb7450
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,LTE)";
+	compatible = "google,pazquel-sku6", "google,pazquel-sku4", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
new file mode 100644
index 000000000..9145b74e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (TI,LTE)";
+	compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
new file mode 100644
index 000000000..9a0e6632a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade)";
+	compatible = "google,pazquel-sku5", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
new file mode 100644
index 000000000..47c5970d8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+	model = "Google Pazquel (TI)";
+	compatible = "google,pazquel-sku1", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
new file mode 100644
index 000000000..8823edbb4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include <arm/cros-ec-keyboard.dtsi>
+
+&ap_sar_sensor {
+	compatible = "semtech,sx9324";
+	semtech,ph0-pin = <1 3 3>;
+	semtech,ph1-pin = <3 1 3>;
+	semtech,ph2-pin = <1 3 3>;
+	semtech,ph3-pin = <0 0 0>;
+	semtech,ph01-resolution = <1024>;
+	semtech,ph23-resolution = <1024>;
+	semtech,startup-sensor = <1>;
+	semtech,ph01-proxraw-strength = <3>;
+	semtech,ph23-proxraw-strength = <1>;
+	semtech,avg-pos-strength = <128>;
+	semtech,input-analog-gain = <0>;
+	semtech,cs-idle-sleep = "gnd";
+
+	/delete-property/ svdd-supply;
+	vdd-supply = <&pp1800_prox>;
+};
+
+/delete-node/&trackpad;
+&ap_tp_i2c {
+	status = "okay";
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pp3300_fp_tp>;
+		post-power-on-delay-ms = <100>;
+		hid-descr-addr = <0x0001>;
+
+		wakeup-source;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&panel {
+	compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "TP_INT_ODL",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts
new file mode 100644
index 000000000..021bcafcf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-lte.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,LTE)";
+	compatible = "google,pazquel-sku22", "google,pazquel-sku20", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts
new file mode 100644
index 000000000..defd84c53
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360-wifi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel360.dtsi"
+
+/ {
+	model = "Google Pazquel (Parade,WIFI-only)";
+	compatible = "google,pazquel-sku21", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
new file mode 100644
index 000000000..273e2249f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+#include "sc7180-trogdor-pazquel.dtsi"
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+	/delete-property/ VBAT-supply;
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3915", "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+		vccio-supply = <&pp1800_l10a>;
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+		MATRIX_KEY(0x03, 0x09, 0)       /* T11 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+		MATRIX_KEY(0x03, 0x09, KEY_SLEEP)
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_PAZQUEL360";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts
new file mode 100644
index 000000000..0202f03ea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev1) with LTE";
+	compatible = "google,pompom-rev1-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
new file mode 100644
index 000000000..ba222a60c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/delete-node/ &keyboard_controller;
+#include <arm/cros-ec-keyboard.dtsi>
+
+/ {
+	model = "Google Pompom (rev1)";
+	compatible = "google,pompom-rev1", "qcom,sc7180";
+};
+
+/*
+ * Pompom rev1 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	/delete-node/ charger-thermistor@0;
+};
+
+&usb_hub_2_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
new file mode 100644
index 000000000..00e187c08
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r2.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev2) with LTE";
+	compatible = "google,pompom-rev2-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
new file mode 100644
index 000000000..64d6172bf
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+	model = "Google Pompom (rev2)";
+	compatible = "google,pompom-rev2", "qcom,sc7180";
+};
+
+/*
+ * Pompom rev2 is stuffed with a 47k NTC as charger thermistor which currently
+ * is not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+	status = "disabled";
+};
+
+&pm6150_adc {
+	/delete-node/ channel@4f;
+};
+
+&pm6150_adc_tm {
+	/delete-node/ charger-thermistor@0;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
new file mode 100644
index 000000000..e90b73c35
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include "sc7180-trogdor-pompom-r3.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Pompom (rev3+) with LTE";
+	compatible = "google,pompom-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
new file mode 100644
index 000000000..f8aac63a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r3.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-pompom.dtsi"
+
+/ {
+	model = "Google Pompom (rev3+)";
+	compatible = "google,pompom", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
new file mode 100644
index 000000000..fd944842d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pompom board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor.dtsi"
+/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+
+/ {
+	thermal-zones {
+		5v-choke-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <250>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+
+			trips {
+				5v-choke-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&alc5682 {
+	realtek,dmic-clk-driving-high;
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+&cpu6_alert0 {
+	temperature = <60000>;
+};
+
+&cpu6_alert1 {
+	temperature = <65000>;
+};
+
+&cpu6_thermal {
+	sustainable-power = <1124>;
+};
+
+&cpu7_alert0 {
+	temperature = <60000>;
+};
+
+&cpu7_alert1 {
+	temperature = <65000>;
+};
+
+&cpu7_thermal {
+	sustainable-power = <1124>;
+};
+
+&cpu8_alert0 {
+	temperature = <60000>;
+};
+
+&cpu8_alert1 {
+	temperature = <65000>;
+};
+
+&cpu8_thermal {
+	sustainable-power = <1124>;
+};
+
+&cpu9_alert0 {
+	temperature = <60000>;
+};
+
+&cpu9_alert1 {
+	temperature = <65000>;
+};
+
+&cpu9_thermal {
+	sustainable-power = <1124>;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&panel {
+	compatible = "kingdisplay,kd116n21-30nv-a010";
+};
+
+&pen_insert {
+	/* Insert = high, eject = low */
+	gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+};
+
+&pm6150_adc {
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "5v_choke_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	5v-choke-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&sound {
+	model = "sc7180-rt5682-max98357a-2mic";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_sel>;
+	dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_c1 {
+	status = "disabled";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_POMPOM";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "TP_INT_ODL",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "PEN_PDCT_L",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "DMIC_SEL",
+			  "",
+			  "",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_R_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	dmic_sel: dmic-sel-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
new file mode 100644
index 000000000..35e8945fc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0-lte.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x600 => 1536
+ *  - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick-r0.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Quackingstick (rev0+) with LTE";
+	compatible = "google,quackingstick-sku1536", "qcom,sc7180";
+};
+
+&ap_sar_sensor {
+	compatible = "semtech,sx9324";
+	semtech,ph0-pin = <3 1 3>;
+	semtech,ph1-pin = <2 1 2>;
+	semtech,ph2-pin = <3 3 1>;
+	semtech,ph3-pin = <1 3 3>;
+	semtech,ph01-resolution = <1024>;
+	semtech,ph23-resolution = <1024>;
+	semtech,startup-sensor = <1>;
+	semtech,ph01-proxraw-strength = <3>;
+	semtech,ph23-proxraw-strength = <3>;
+	semtech,avg-pos-strength = <256>;
+
+	/delete-property/ svdd-supply;
+	vdd-supply = <&pp1800_prox>;
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
new file mode 100644
index 000000000..0a7f2286b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick-r0.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x601 => 1537
+ *  - bits 11..8: Panel ID: 0x6 (AUO)
+ */
+
+#include "sc7180-trogdor-quackingstick.dtsi"
+
+/ {
+	model = "Google Quackingstick (rev0+)";
+	compatible = "google,quackingstick-sku1537", "qcom,sc7180";
+};
+
+&mdss_dsi0_phy {
+	qcom,phy-rescode-offset-top = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+	qcom,phy-rescode-offset-bot = /bits/ 8 <(-13) (-13) (-13) (-13) (-13)>;
+	qcom,phy-drive-ldo-level = <375>;
+};
+
+&panel {
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
new file mode 100644
index 000000000..62ab6427d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Quackingstick board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/* This board only has 1 USB Type-C port. */
+/delete-node/ &usb_c1;
+
+/ {
+	ppvar_lcd: ppvar-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_lcd";
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvar_lcd_en>;
+
+		vin-supply = <&pp5000_a>;
+	};
+
+	v1p8_disp: v1p8-disp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p8_disp";
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_disp_on>;
+
+		vin-supply = <&pp3300_a>;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&mdss_dsi0 {
+	panel: panel@0 {
+		/* Compatible will be filled in per-board */
+		reg = <0>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		avdd-supply = <&ppvar_lcd>;
+		pp1800-supply = <&v1p8_disp>;
+		pp3300-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		rotation = <270>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+	pins = "gpio67";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "PEN_DET_ODL",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "EN_PP3300_DX_EDP",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT_L",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "",
+			  "PP1800_DISP_ON",
+			  "LCD_RST",
+			  "PPVAR_LCD_EN",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	lcd_rst: lcd-rst-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ppvar_lcd_en: ppvar-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pp1800_disp_on: pp1800-disp-on-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
new file mode 100644
index 000000000..1123c02bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+#include "sc7180-trogdor-r1.dts"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+	model = "Google Trogdor (rev1+) with LTE";
+	compatible = "google,trogdor-sku0", "qcom,sc7180";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
new file mode 100644
index 000000000..671b3691f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor board device tree source
+ *
+ * Copyright 2020 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+/* Must come after sc7180-trogdor.dtsi to modify cros_ec */
+#include <arm/cros-ec-keyboard.dtsi>
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+
+/ {
+	model = "Google Trogdor (rev1+)";
+	compatible = "google,trogdor", "qcom,sc7180";
+};
+
+&ap_tp_i2c {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&pp3300_ts>;
+
+		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&panel {
+	compatible = "auo,b116xa01";
+};
+
+&sdhc_2 {
+	status = "okay";
+};
+
+&trackpad {
+	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&usb_hub_2_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+&usb_hub_3_x {
+	 vdd-supply = <&pp3300_l7c>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+&trackpad_int_1v8_odl {
+	pins = "gpio58";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "FP_TO_AP_IRQ_L",
+			  "FP_RST_L",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "FPMCU_BOOT0",
+			  "EDP_BRIJ_IRQ",
+			  "AP_EDP_BKLTEN",
+			  "",
+			  "",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "HUB_RST_L",
+			  "PEN_RST_ODL",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL",
+			  "AMP_EN",
+			  "P_SENSOR_INT_L",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+			  "",
+			  "HP_IRQ",
+			  "AP_RAM_ID0",
+			  "EN_PP3300_DX_EDP",
+			  "AP_BRD_ID2",
+			  "BRIJ_SUSPEND",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "",
+			  "",
+			  "AMP_DIN",
+			  "PEN_PDCT_L",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "TRACKPAD_INT_1V8_ODL",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "DBG_SPI_HOLD_L",
+			  "AP_SPI_CS0_L",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "EN_PP3300_CODEC",
+			  "EN_PP3300_HUB",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "EDP_BRIJ_EN",
+			  "AP_SKU_ID0",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
new file mode 100644
index 000000000..b0c3be4c3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_dx_edp {
+	off-on-delay-us = <500000>;
+
+	/*
+	 * It's nicer to start with this regulator enabled. The
+	 * bootloader may have left it on and it's nice not to cause an
+	 * extra power cycle of the touchscreen and eDP panel at bootup.
+	 * This should help speed bootup because we have off-on-delay-us.
+	 */
+	regulator-boot-on;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+edp_brij_i2c: &i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86_bridge: bridge@2d {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+		vpll-supply = <&pp1800_edp_vpll>;
+		vccio-supply = <&pp1800_brij_vccio>;
+		vcca-supply = <&pp1200_brij>;
+		vcc-supply = <&pp1200_brij>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
+		clock-names = "refclk";
+
+		no-hpd;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					data-lanes = <0 1>;
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				/* Compatible will be filled in per-board */
+				power-supply = <&pp3300_dx_edp>;
+				backlight = <&backlight>;
+				hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in>;
+};
+
+&tlmm {
+	edp_brij_irq: edp-brij-irq-state {
+		pins = "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
new file mode 100644
index 000000000..6225ab832
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x401 => 1025
+ *  - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-boe.dts"
+
+/ {
+	model = "Google Wormdingler rev1+ (BOE, rt5682s)";
+	compatible = "google,wormdingler-sku1025", "qcom,sc7180";
+};
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
new file mode 100644
index 000000000..6eeead70d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x400 => 1024
+ *  - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+	model = "Google Wormdingler rev1+ BOE panel board";
+	compatible = "google,wormdingler-sku1024", "qcom,sc7180";
+};
+
+&mdss_dsi0_phy {
+	qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+	qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+	qcom,phy-drive-ldo-level = <450>;
+};
+
+&panel {
+	compatible = "boe,tv110c9m-ll3";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
new file mode 100644
index 000000000..b40b068da
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0001 => 1
+ *  - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev1-inx.dts"
+
+/ {
+	model = "Google Wormdingler rev1+ (INX, rt5682s)";
+	compatible = "google,wormdingler-sku1", "qcom,sc7180";
+};
+
+&alc5682 {
+	compatible = "realtek,rt5682s";
+	/delete-property/ VBAT-supply;
+	realtek,dmic1-clk-pin = <2>;
+	realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+	compatible = "google,sc7180-trogdor";
+	model = "sc7180-rt5682s-max98357a-1mic";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
new file mode 100644
index 000000000..dd34a2297
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0000 => 0
+ *  - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+	model = "Google Wormdingler rev1+ INX panel board";
+	compatible = "google,wormdingler-sku0", "qcom,sc7180";
+};
+
+&panel {
+	compatible = "innolux,hj110iz-01a";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
new file mode 100644
index 000000000..2f6a340dd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+	avdd_lcd: avdd-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_lcd";
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_lcd_en>;
+
+		vin-supply = <&pp5000_a>;
+	};
+
+	avee_lcd: avee-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avee_lcd";
+
+		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avee_lcd_en>;
+
+		vin-supply = <&pp5000_a>;
+	};
+
+	pp1800_ts:
+	v1p8_mipi: v1p8-mipi-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p8_mipi";
+
+		gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mipi_1800_en>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	thermal-zones {
+		skin_temp_thermal: skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 1>;
+			sustainable-power = <574>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <62500>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <68000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+	status = "okay";
+};
+
+&cros_ec {
+	base_detection: cbas {
+		compatible = "google,cros-cbas";
+	};
+
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb-switches";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@1 {
+		compatible = "hid-over-i2c";
+		reg = <0x01>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <70>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+		vddl-supply = <&pp1800_ts>;
+	};
+};
+
+&mdss_dsi0 {
+
+	panel: panel@0 {
+		reg = <0>;
+		enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_reset_1800>;
+		avdd-supply = <&avdd_lcd>;
+		avee-supply = <&avee_lcd>;
+		pp1800-supply = <&v1p8_mipi>;
+		pp3300-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		rotation = <270>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&panel_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&pm6150_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	skin-temp-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
+&wifi {
+	qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+	gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+	pins = "gpio85";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "HUB_RST_L",
+			  "AP_RAM_ID0",
+			  "AP_SKU_ID2",
+			  "AP_RAM_ID1",
+			  "",
+			  "AP_RAM_ID2",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "TS_RESET_L",
+			  "TS_INT_L",
+			  "",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_CLK",
+			  "",
+			  "",
+			  "UF_CAM_SDA",
+			  "UF_CAM_SCL",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "AVEE_LCD_EN",
+			  "",
+			  "AMP_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "HP_IRQ",
+			  "WF_CAM_RST_L",
+			  "UF_CAM_RST_L",
+			  "AP_BRD_ID2",
+			  "",
+			  "AP_BRD_ID0",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+			  "BT_UART_TXD",
+			  "BT_UART_RXD",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DIN",
+			  "",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "HP_MCLK",
+			  "AP_SKU_ID0",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_SPI_CLK",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "WLAN_SW_CTRL",
+			  "",
+			  "REPORT_E",
+			  "",
+			  "ID0",
+			  "",
+			  "ID1",
+			  "",
+			  "",
+			  "",
+			  "CODEC_PWR_EN",
+			  "HUB_EN",
+			  "TP_EN",
+			  "MIPI_1.8V_EN",
+			  "VDD_RESET_1.8V",
+			  "AVDD_LCD_EN",
+			  "",
+			  "AP_SKU_ID1",
+			  "AP_RST_REQ",
+			  "",
+			  "AP_BRD_ID1",
+			  "AP_EC_INT_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "",
+			  "BOOT_CONFIG_4",
+			  "BOOT_CONFIG_2",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BOOT_CONFIG_3",
+			  "WCI2_LTE_COEX_TXD",
+			  "WCI2_LTE_COEX_RXD",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "FORCED_USB_BOOT_POL",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "DP_HOT_PLUG_DET",
+			  "EC_IN_RW_ODL";
+
+	avdd_lcd_en: avdd-lcd-en-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	avee_lcd_en: avee-lcd-en-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mipi_1800_en: mipi-1800-en-state {
+		pins = "gpio86";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	vdd_reset_1800: vdd-reset-1800-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
new file mode 100644
index 000000000..5a33e16a8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -0,0 +1,1567 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor device tree source (common between revisions)
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/sc7180-lpass.h>
+
+#include "sc7180.dtsi"
+#include "sc7180-firmware-tfa.dtsi"
+/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+	thermal-zones {
+		charger_thermal: charger-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150_adc_tm 0>;
+
+			trips {
+				charger-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x94600000 0x0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		atf_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		mpss_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x2000000>;
+			no-map;
+		};
+
+		venus_mem: memory@8f600000 {
+			reg = <0 0x8f600000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@94100000 {
+			reg = <0x0 0x94100000 0x0 0x200000>;
+			no-map;
+		};
+
+		mba_mem: memory@94400000 {
+			reg = <0x0 0x94400000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+
+	aliases {
+		bluetooth0 = &bluetooth;
+		hsuart0 = &uart3;
+		serial0 = &uart8;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* FIXED REGULATORS - parents above children */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_a: pp5000-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+
+		/* EC turns on with en_pp5000_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_a: pp3300-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_a";
+
+		/* EC turns on with en_pp3300_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * Actually should be pp3300 but that's practically an alias for
+		 * pp3300_a so we use pp3300's vin-supply here to avoid one more
+		 * node.
+		 */
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_ec:
+	pp1800_sensors:
+	pp1800_ldo: pp1800-ldo-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo";
+
+		/* EC turns on with hibernate_l; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/*
+		 * Actually should be pp1800_h1 but we don't have any need to
+		 * model that so we use the parent of pp1800_h1.
+		 */
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp1800_uf_cam: pp1800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp2800_uf_cam: pp2800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&uf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp2800_vcm_wf_cam:
+	pp2800_wf_cam: pp2800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_audio:
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_dx_edp:
+	pp3300_ts: pp3300-dx-edp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dx_edp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_fp_tp: pp3300-fp-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_VIO_OUT; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp3300_hub: pp3300-hub-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_hub>;
+
+		/* The BIOS leaves this regulator on */
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* The panels don't seem to like anything below ~ 5% */
+		brightness-levels = <
+			196 256 324 400 484 576 676 784 900 1024 1156 1296
+			1444 1600 1764 1936 2116 2304 2500 2704 2916 3136
+			3364 3600 3844 4096
+		>;
+		num-interpolated-steps = <64>;
+		default-brightness-level = <951>;
+
+		pwms = <&cros_ec_pwm 1>;
+		enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+		power-supply = <&ppvar_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_edp_bklten>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_pdct_l>;
+
+		pen_insert: switch-pen-insert {
+			label = "Pen Insert";
+
+			/* Insert = low, eject = high */
+			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	max98360a: audio-codec-0 {
+		compatible = "maxim,max98360a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		keyboard_backlight: led-0 {
+			status = "disabled";
+			label = "cros_ec::kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+
+	sound: sound {
+		compatible = "google,sc7180-trogdor";
+		model = "sc7180-rt5682-max98357a-1mic";
+
+		audio-routing =
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MultiMedia0";
+			reg = <MI2S_PRIMARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			sound_multimedia0_codec: codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "MultiMedia1";
+			reg = <MI2S_SECONDARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			sound_multimedia1_codec: codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@5 {
+			link-name = "MultiMedia2";
+			reg = <LPASS_DP_RX>;
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+	};
+};
+
+&qfprom {
+	vcc-supply = <&pp1800_l11a>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vddpx_1:
+		vdd2:
+		pp1125_s1a: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdd_qlink_lv:
+		vdd_qlink_lv_ck:
+		vdd_qusb_hs0_core:
+		vdd_ufs1_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_csi3_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_pll_cc_ebi01:
+		vdda_qrefs_0p9:
+		vdda_usb_ss_dp_core:
+		pp900_l4a: ldo4 {
+			regulator-min-microvolt = <824000>;
+			regulator-max-microvolt = <928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_cx_wlan:
+		pp800_l9a: ldo9 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd1:
+		vddpx_3:
+		vddpx_7:
+		vio_in:
+		pp1800_l10a: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdda_apc1_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_bb_clk:
+		pp1800_l11a: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		mcp_vccq:
+		pp1800_l12a_r: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * On trogdor this needs to match l10a since we use it to
+		 * give power to things like SPI flash which communicate back
+		 * on lines powered by l10a.  Thus we force to 1.8V.
+		 */
+		pp1800_l13a: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pp1800_prox:
+		pp1800_l14a: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_alc5682:
+		pp1800_l15a: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vdd_pdphy:
+		pp3100_l17a: ldo17 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_pen:
+		pp1800_l18a: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		mcp_vcc:
+		pp2850_l19a: ldo19 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		pp1300_s8c: smps8 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+		};
+
+		pp1800_l1c: ldo1 {
+			regulator-min-microvolt = <1616000>;
+			regulator-max-microvolt = <1984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_adc_dac:
+		pp1300_l2c: ldo2 {
+			regulator-min-microvolt = <1168000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1200_brij:
+		vdd_ufs1_1p2:
+		vdda_csi0_1p25:
+		vdda_csi1_1p25:
+		vdda_csi2_1p25:
+		vdda_csi3_1p25:
+		vdda_hv_ebi0:
+		vdda_mipi_dsi0_1p2:
+		vdda_usb_ss_dp_1p2:
+		vddpx_10:
+		pp1200_l3c: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		ppvar_l6c: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l7c: ldo7 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_brij_vccio:
+		pp1800_edp_vpll:
+		pp1800_l8c: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2950_l9c: ldo9 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l10c: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l11c: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+ap_ec_spi: &spi6 {
+	status = "okay";
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+ap_h1_spi: &spi0 {
+	status = "okay";
+	cr50: tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <42 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&camcc {
+	status = "disabled";
+};
+
+ap_sar_sensor_i2c: &i2c5 {
+	clock-frequency = <400000>;
+
+	ap_sar_sensor: proximity@28 {
+		compatible = "semtech,sx9310";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&p_sensor_int_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp3300_a>;
+		svdd-supply = <&pp1800_prox>;
+
+		label = "proximity-wifi";
+	};
+};
+
+ap_tp_i2c: &i2c7 {
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_fp_tp>;
+
+		wakeup-source;
+	};
+};
+
+hp_i2c: &i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682i";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		/*
+		 * This will get ignored because the interrupt type
+		 * is set in rt5682.c.
+		 */
+		interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+		VBAT-supply = <&pp3300_audio>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <1>;
+		realtek,jd-src = <1>;
+	};
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	secondary_mi2s: dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+};
+
+&lpass_hm {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hot_plug_det>;
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&pm6150_adc {
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "charger_therm";
+	};
+};
+
+&pm6150_adc_tm {
+	status = "okay";
+
+	charger-thermistor@0 {
+		reg = <0>;
+		io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6150_pon {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7180-mss-pil";
+	reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+	reg-names = "qdsp6", "rmb";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_NAV_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo";
+
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+	memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+
+	/* This gets overridden for SKUs with LTE support. */
+	firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
+			"qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn";
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+	qcom,spare-regs = <&tcsr_regs_2 0xb3e4>;
+};
+
+&scm {
+	/* TF-A firmware maps memory cached so mark dma-coherent to match. */
+	dma-coherent;
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+	vmmc-supply = <&mcp_vcc>;
+	vqmmc-supply = <&mcp_vccq>;
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+	pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs_gpio>;
+	cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+};
+
+&spi6 {
+	pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs_gpio>;
+	cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+};
+
+ap_spi_fp: &spi10 {
+	pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs_gpio>;
+	cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_tp>;
+	};
+};
+
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart3 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart3_sleep>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3991-bt";
+		vddio-supply = <&pp1800_l10a>;
+		vddxo-supply = <&pp1800_l1c>;
+		vddrf-supply = <&pp1300_l2c>;
+		vddch0-supply = <&pp3300_l10c>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdd-supply = <&vdd_qusb_hs0_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+	qcom,imp-res-offset-value = <8>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,bias-ctrl-value = <0x22>;
+	qcom,charge-ctrl-value = <3>;
+	qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core>;
+};
+
+&venus {
+	video-firmware {
+		iommus = <&apps_smmu 0x0c42 0x0>;
+	};
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>;
+	vdd-1.8-xo-supply = <&pp1800_l1c>;
+	vdd-1.3-rfa-supply = <&pp1300_l2c>;
+	vdd-3.3-ch0-supply = <&pp3300_l10c>;
+	vdd-3.3-ch1-supply = <&pp3300_l11c>;
+
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&pri_mi2s_active {
+	drive-strength = <2>;
+	bias-pull-down;
+};
+
+&pri_mi2s_mclk_active {
+	drive-strength = <2>;
+	bias-pull-down;
+};
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+};
+
+&qspi_clk {
+	drive-strength = <8>;
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data0 {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;
+};
+
+&qup_i2c2_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c4_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c5_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c7_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c9_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_spi0_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi0_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi6_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_spi {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
+
+&qup_uart3_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart3_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart8_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart8_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&sec_mi2s_active {
+	drive-strength = <2>;
+	bias-pull-down;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm6150_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pm6150l_gpios {
+	gpio-line-names = "AP_SUSPEND",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "";
+};
+
+&tlmm {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
+
+	amp_en: amp-en-state {
+		pins = "gpio23";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio94";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ap_edp_bklten: ap-edp-bklten-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+
+	ap_suspend_l_neuter: ap-suspend-l-neuter-state {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
+	};
+
+	bios_flash_wp_l: bios-flash-wp-l-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
+	edp_brij_en: edp-brij-en-state {
+		pins = "gpio104";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_codec: en-pp3300-codec-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_hub: en-pp3300-hub-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fp_rst_l: fp-rst-l-state {
+		pins = "gpio22";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
+		pins = "gpio4";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	fpmcu_boot0: fpmcu-boot0-state {
+		pins = "gpio10";
+		function = "gpio";
+		bias-disable;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio42";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hp_irq: hp-irq-state {
+		pins = "gpio28";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio21";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l-state-state {
+		pins = "gpio52";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_rst_odl: pen-rst-odl-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high; /* TODO: Remove this? */
+	};
+
+	p_sensor_int_l: p-sensor-int-l-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio63", "gpio64", "gpio65", "gpio68";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+
+	qup_uart3_sleep: qup-uart3-sleep-state {
+		cts-pins {
+			/*
+			 * Configure a pull-down on CTS to match the pull of
+			 * the Bluetooth module.
+			 */
+			pins = "gpio38";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		rts-pins {
+			/*
+			 * Configure pull-down on RTS. As RTS is active low
+			 * signal, pull it low to indicate the BT SoC that it
+			 * can wakeup the system anytime from suspend state by
+			 * pulling RX low (by sending wakeup bytes).
+			 */
+			pins = "gpio39";
+			function = "gpio";
+			bias-pull-down;
+		};
+
+		tx-pins {
+			/*
+			 * Configure pull-up on TX when it isn't actively driven
+			 * to prevent BT SoC from receiving garbage during sleep.
+			 */
+			pins = "gpio40";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		rx-pins {
+			/*
+			 * Configure a pull-up on RX. This is needed to avoid
+			 * garbage data when the TX pin of the Bluetooth module
+			 * is floating which may cause spurious wakeups.
+			 */
+			pins = "gpio41";
+			function = "gpio";
+			bias-pull-up;
+		};
+	};
+
+	/* Named trackpad_int_1v8_odl on earlier revision schematics */
+	trackpad_int_1v8_odl:
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio0";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	ts_int_l: ts-int-l-state {
+		pins = "gpio9";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio8";
+		function = "gpio";
+		bias-disable;
+
+		/*
+		 * The reset GPIO to the touchscreen takes almost 2ms to drop
+		 * at the default drive strength. When we bump it up to 8mA it
+		 * falls in under 500us. We want this to be fast since the Elan
+		 * datasheet (and any drivers written based on it) talk about using
+		 * a 500 us reset pulse.
+		 */
+		drive-strength = <8>;
+	};
+
+	sdc1_on: sdc1-on-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <16>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc1_off: sdc1-off-state {
+		clk-pins {
+			pins = "sdc1_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc1_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc1_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		rclk-pins {
+			pins = "sdc1_rclk";
+			bias-pull-down;
+		};
+	};
+
+	sdc2_on: sdc2-on-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	sdc2_off: sdc2-off-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sd-cd-pins {
+			pins = "gpio69";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	uf_cam_en: uf-cam-en-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+
+		/* External pull down */
+		bias-disable;
+	};
+
+	wf_cam_en: wf-cam-en-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+
+		/* External pull down */
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
new file mode 100644
index 000000000..f7c528ecb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -0,0 +1,4639 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SC7180 SoC device tree source
+ *
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+#include <dt-bindings/clock/qcom,gcc-sc7180.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi3 = &spi3;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi8 = &spi8;
+		spi10 = &spi10;
+		spi11 = &spi11;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <38400000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <415>;
+			dynamic-power-coefficient = <137>;
+			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <480>;
+			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo468";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <480>;
+			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle_states: idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain_idle_states: domain-idle-states {
+			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-l3-power-collapse";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-cx-retention";
+				arm,psci-suspend-param = <0x41001244>;
+				entry-latency-us = <3638>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-power-down";
+				arm,psci-suspend-param = <0x4100b244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9826>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc7180", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp3: opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp10: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp5: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp8: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp10: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp11: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp12: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp13: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp14: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp15: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
+
+		cpu6_opp16: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_PC
+					      &CLUSTER_SLEEP_CX_RET
+					      &CLUSTER_AOSS_SLEEP>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80820000 {
+			reg = <0x0 0x80820000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+			no-map;
+		};
+
+		sec_apps_mem: memory@808ff000 {
+			reg = <0x0 0x808ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x3900000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@94600000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x94600000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc7180";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SC7180_CX>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x7a0>,
+			      <0 0x00780000 0 0x7a0>,
+			      <0 0x00782000 0 0x100>,
+			      <0 0x00786000 0 0x1fff>;
+
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim-primary@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 3>;
+			};
+
+			gpu_speed_bin: gpu_speed_bin@1d2 {
+				reg = <0x1d2 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+				<0 0x007c5000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0x60 0x0>;
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 600000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_spi>, <&qup_spi0_cs>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_spi>, <&qup_spi1_cs>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_spi>, <&qup_spi3_cs>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_spi>, <&qup_spi5_cs>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x4c3 0x0>;
+			status = "disabled";
+
+			i2c6: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi6: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_spi>, <&qup_spi6_cs>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart6: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart7: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c8: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi8: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_spi>, <&qup_spi8_cs>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart8: serial@a88000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			uart9: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi10: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_spi>, <&qup_spi10_cs>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart10: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7180_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				status = "disabled";
+			};
+
+			spi11: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_spi>, <&qup_spi11_cs>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			uart11: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc7180-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc7180-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1638000 {
+			compatible = "qcom,sc7180-mc-virt";
+			reg = <0 0x01638000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qup_virt: interconnect@1650000 {
+			compatible = "qcom,sc7180-qup-virt";
+			reg = <0 0x01650000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7180-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1705000 {
+			compatible = "qcom,sc7180-aggre2-noc";
+			reg = <0 0x01705000 0 0x9000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@170e000 {
+			compatible = "qcom,sc7180-compute-noc";
+			reg = <0 0x0170e000 0 0x6000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc7180-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sc7180-ipa";
+
+			iommus = <&apps_smmu 0x440 0x0>,
+				 <&apps_smmu 0x442 0x0>;
+			reg = <0 0x01e40000 0 0x7000>,
+			      <0 0x01e47000 0 0x2000>,
+			      <0 0x01e04000 0 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sc7180-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tcsr_regs_2: syscon@1fc0000 {
+			compatible = "qcom,sc7180-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x40000>;
+		};
+
+		tlmm: pinctrl@3500000 {
+			compatible = "qcom,sc7180-pinctrl";
+			reg = <0 0x03500000 0 0x300000>,
+			      <0 0x03900000 0 0x300000>,
+			      <0 0x03d00000 0 0x300000>;
+			reg-names = "west", "north", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 120>;
+			wakeup-parent = <&pdc>;
+
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio117";
+				function = "dp_hot";
+			};
+
+			qspi_clk: qspi-clk-state {
+				pins = "gpio63";
+				function = "qspi_clk";
+			};
+
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio68";
+				function = "qspi_cs";
+			};
+
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio72";
+				function = "qspi_cs";
+			};
+
+			qspi_data0: qspi-data0-state {
+				pins = "gpio64";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio65";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
+				pins = "gpio66", "gpio67";
+				function = "qspi_data";
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup00";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup01";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio15", "gpio16";
+				function = "qup02_i2c";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio38", "gpio39";
+				function = "qup03";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup04_i2c";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio25", "gpio26";
+				function = "qup05";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio59", "gpio60";
+				function = "qup10";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup11_i2c";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio42", "gpio43";
+				function = "qup12";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio46", "gpio47";
+				function = "qup13_i2c";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio86", "gpio87";
+				function = "qup14";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio53", "gpio54";
+				function = "qup15";
+			};
+
+			qup_spi0_spi: qup-spi0-spi-state {
+				pins = "gpio34", "gpio35", "gpio36";
+				function = "qup00";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio37";
+				function = "qup00";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio37";
+				function = "gpio";
+			};
+
+			qup_spi1_spi: qup-spi1-spi-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio3";
+				function = "qup01";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi3_spi: qup-spi3-spi-state {
+				pins = "gpio38", "gpio39", "gpio40";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio41";
+				function = "qup03";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio41";
+				function = "gpio";
+			};
+
+			qup_spi5_spi: qup-spi5-spi-state {
+				pins = "gpio25", "gpio26", "gpio27";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio28";
+				function = "qup05";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio28";
+				function = "gpio";
+			};
+
+			qup_spi6_spi: qup-spi6-spi-state {
+				pins = "gpio59", "gpio60", "gpio61";
+				function = "qup10";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio62";
+				function = "qup10";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio62";
+				function = "gpio";
+			};
+
+			qup_spi8_spi: qup-spi8-spi-state {
+				pins = "gpio42", "gpio43", "gpio44";
+				function = "qup12";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio45";
+				function = "qup12";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio45";
+				function = "gpio";
+			};
+
+			qup_spi10_spi: qup-spi10-spi-state {
+				pins = "gpio86", "gpio87", "gpio88";
+				function = "qup14";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio89";
+				function = "qup14";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio89";
+				function = "gpio";
+			};
+
+			qup_spi11_spi: qup-spi11-spi-state {
+				pins = "gpio53", "gpio54", "gpio55";
+				function = "qup15";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio56";
+				function = "qup15";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio56";
+				function = "gpio";
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				qup_uart0_cts: cts-pins {
+					pins = "gpio34";
+					function = "qup00";
+				};
+
+				qup_uart0_rts: rts-pins {
+					pins = "gpio35";
+					function = "qup00";
+				};
+
+				qup_uart0_tx: tx-pins {
+					pins = "gpio36";
+					function = "qup00";
+				};
+
+				qup_uart0_rx: rx-pins {
+					pins = "gpio37";
+					function = "qup00";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				qup_uart1_cts: cts-pins {
+					pins = "gpio0";
+					function = "qup01";
+				};
+
+				qup_uart1_rts: rts-pins {
+					pins = "gpio1";
+					function = "qup01";
+				};
+
+				qup_uart1_tx: tx-pins {
+					pins = "gpio2";
+					function = "qup01";
+				};
+
+				qup_uart1_rx: rx-pins {
+					pins = "gpio3";
+					function = "qup01";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-default-state {
+				qup_uart2_tx: tx-pins {
+					pins = "gpio15";
+					function = "qup02_uart";
+				};
+
+				qup_uart2_rx: rx-pins {
+					pins = "gpio16";
+					function = "qup02_uart";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-default-state {
+				qup_uart3_cts: cts-pins {
+					pins = "gpio38";
+					function = "qup03";
+				};
+
+				qup_uart3_rts: rts-pins {
+					pins = "gpio39";
+					function = "qup03";
+				};
+
+				qup_uart3_tx: tx-pins {
+					pins = "gpio40";
+					function = "qup03";
+				};
+
+				qup_uart3_rx: rx-pins {
+					pins = "gpio41";
+					function = "qup03";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				qup_uart4_tx: tx-pins {
+					pins = "gpio115";
+					function = "qup04_uart";
+				};
+
+				qup_uart4_rx: rx-pins {
+					pins = "gpio116";
+					function = "qup04_uart";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-default-state {
+				qup_uart5_cts: cts-pins {
+					pins = "gpio25";
+					function = "qup05";
+				};
+
+				qup_uart5_rts: rts-pins {
+					pins = "gpio26";
+					function = "qup05";
+				};
+
+				qup_uart5_tx: tx-pins {
+					pins = "gpio27";
+					function = "qup05";
+				};
+
+				qup_uart5_rx: rx-pins {
+					pins = "gpio28";
+					function = "qup05";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				qup_uart6_cts: cts-pins {
+					pins = "gpio59";
+					function = "qup10";
+				};
+
+				qup_uart6_rts: rts-pins {
+					pins = "gpio60";
+					function = "qup10";
+				};
+
+				qup_uart6_tx: tx-pins {
+					pins = "gpio61";
+					function = "qup10";
+				};
+
+				qup_uart6_rx: rx-pins {
+					pins = "gpio62";
+					function = "qup10";
+				};
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				qup_uart7_tx: tx-pins {
+					pins = "gpio6";
+					function = "qup11_uart";
+				};
+
+				qup_uart7_rx: rx-pins {
+					pins = "gpio7";
+					function = "qup11_uart";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-default-state {
+				qup_uart8_tx: tx-pins {
+					pins = "gpio44";
+					function = "qup12";
+				};
+
+				qup_uart8_rx: rx-pins {
+					pins = "gpio45";
+					function = "qup12";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				qup_uart9_tx: tx-pins {
+					pins = "gpio46";
+					function = "qup13_uart";
+				};
+
+				qup_uart9_rx: rx-pins {
+					pins = "gpio47";
+					function = "qup13_uart";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-default-state {
+				qup_uart10_cts: cts-pins {
+					pins = "gpio86";
+					function = "qup14";
+				};
+
+				qup_uart10_rts: rts-pins {
+					pins = "gpio87";
+					function = "qup14";
+				};
+
+				qup_uart10_tx: tx-pins {
+					pins = "gpio88";
+					function = "qup14";
+				};
+
+				qup_uart10_rx: rx-pins {
+					pins = "gpio89";
+					function = "qup14";
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default-state {
+				qup_uart11_cts: cts-pins {
+					pins = "gpio53";
+					function = "qup15";
+				};
+
+				qup_uart11_rts: rts-pins {
+					pins = "gpio54";
+					function = "qup15";
+				};
+
+				qup_uart11_tx: tx-pins {
+					pins = "gpio55";
+					function = "qup15";
+				};
+
+				qup_uart11_rx: rx-pins {
+					pins = "gpio56";
+					function = "qup15";
+				};
+			};
+
+			sec_mi2s_active: sec-mi2s-active-state {
+				pins = "gpio49", "gpio50", "gpio51";
+				function = "mi2s_1";
+			};
+
+			pri_mi2s_active: pri-mi2s-active-state {
+				pins = "gpio53", "gpio54", "gpio55", "gpio56";
+				function = "mi2s_0";
+			};
+
+			pri_mi2s_mclk_active: pri-mi2s-mclk-active-state {
+				pins = "gpio57";
+				function = "lpass_ext";
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7180-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7180_CX>,
+					<&rpmhpd SC7180_MX>,
+					<&rpmhpd SC7180_MSS>;
+			power-domain-names = "cx", "mx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-618.0", "qcom,adreno";
+			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
+				<0 0x05061000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-825000000 {
+					opp-hz = /bits/ 64 <825000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x04>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0x07>;
+				};
+
+				opp-180000000 {
+					opp-hz = /bits/ 64 <180000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0x07>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				<&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible = "qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
+			reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
+				<0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+			       <&gpucc GPU_CC_CXO_CLK>,
+			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+			power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
+			power-domain-names = "cx", "gx";
+			iommus = <&adreno_smmu 5>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sc7180-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dma@10a2000 {
+			compatible = "qcom,sc7180-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ae000 0x0 0x2000>;
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			iommus = <&apps_smmu 0x80 0>;
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+
+			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 600000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <200000 0>;
+				};
+			};
+		};
+
+		qspi: spi@88dc000 {
+			compatible = "qcom,sc7180-qspi", "qcom,qspi-v1";
+			reg = <0 0x088dc000 0 0x600>;
+			iommus = <&apps_smmu 0x20 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0
+					&config_noc SLAVE_QSPI_0 0>;
+			interconnect-names = "qspi-config";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
+			status = "disabled";
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x3c>,
+			      <0 0x088ea000 0 0x18c>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x128>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x128>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x18>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		pmu@90b6300 {
+			compatible = "qcom,sc7180-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6300 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+			};
+		};
+
+		pmu@90cd000 {
+			compatible = "qcom,sc7180-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x090cd000 0 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <1144000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <3879000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <6881000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <8137000>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sc7180-dc-noc";
+			reg = <0 0x09160000 0 0x03200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7180-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc7180-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sc7180-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x540 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7180-venus";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd SC7180_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus";
+			iommus = <&apps_smmu 0x0c00 0x60>;
+			memory-region = <&venus_mem>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
+			interconnect-names = "video-mem", "cpu-cfg";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-150000000 {
+					opp-hz = /bits/ 64 <150000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-340000000 {
+					opp-hz = /bits/ 64 <340000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-434000000 {
+					opp-hz = /bits/ 64 <434000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-500000097 {
+					opp-hz = /bits/ 64 <500000097>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc7180-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sc7180-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc7180-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			       <&gcc GCC_CAMERA_AHB_CLK>,
+			       <&gcc GCC_CAMERA_XO_CLK>;
+			clock-names = "bi_tcxo", "iface", "xo";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sc7180-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "ahb", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";
+
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@ae01000 {
+				compatible = "qcom,sc7180-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus", "iface", "rot", "lut", "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						  <&dispcc DISP_CC_MDSS_ROT_CLK>,
+						  <&dispcc DISP_CC_MDSS_AHB_CLK>;
+				assigned-clock-rates = <19200000>,
+						       <19200000>,
+						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sc7180-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sc7180-dp";
+				status = "disabled";
+
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
+				#sound-dai-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7180-dispcc";
+			reg = <0 0x0af00000 0 0x200000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7180-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b2e0000 {
+			compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
+			reg = <0 0x0b2e0000 0 0x20000>;
+			#reset-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <10>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sram@146aa000 {
+			compatible = "qcom,sc7180-imem", "syscon", "simple-mfd";
+			reg = <0 0x146aa000 0 0x2000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146aa000 0x2000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0x17a40000 0 0x20000>;
+				status = "disabled";
+			};
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sc7180-apss-shared",
+				     "qcom,sdm845-apss-shared";
+			reg = <0 0x17c00000 0 0x10000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c20000 0 0x1000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x18200000 0 0x10000>,
+			      <0 0x18210000 0 0x10000>,
+			      <0 0x18220000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc7180-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7180-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sc7180-osm-l3", "qcom,osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,sc7180-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_mem>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		lpasscc: clock-controller@62d00000 {
+			compatible = "qcom,sc7180-lpasscorecc";
+			reg = <0 0x62d00000 0 0x50000>,
+			      <0 0x62780000 0 0x30000>;
+			reg-names = "lpass_core_cc", "lpass_audio_cc";
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "reserved"; /* Controlled by ADSP */
+		};
+
+		lpass_cpu: lpass@62d87000 {
+			compatible = "qcom,sc7180-lpass-cpu";
+
+			reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
+			reg-names = "lpass-hdmiif", "lpass-lpaif";
+
+			iommus = <&apps_smmu 0x1020 0>,
+				<&apps_smmu 0x1021 0>,
+				<&apps_smmu 0x1032 0>;
+
+			power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			status = "disabled";
+
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
+				 <&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
+
+			clock-names = "pcnoc-sway-clk", "audio-core",
+					"mclk0", "pcnoc-mport-clk",
+					"mi2s-bit-clk0", "mi2s-bit-clk1";
+
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi";
+		};
+
+		lpass_hm: clock-controller@63000000 {
+			compatible = "qcom,sc7180-lpasshm";
+			reg = <0 0x63000000 0 0x28>;
+			clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SC7180_CX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "reserved"; /* Controlled by ADSP */
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2_thermal: cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3_thermal: cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4_thermal: cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5_thermal: cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+			sustainable-power = <1052>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6_thermal: cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7_thermal: cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu8_thermal: cpu8-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu8_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu8_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu8_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu9_thermal: cpu9-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+			sustainable-power = <1425>;
+
+			trips {
+				cpu9_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu9_alert0>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu9_alert1>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0_crit: aoss0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss0_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss1_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1_crit: aoss1-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cwlan_crit: cwlan-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				audio_crit: audio-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				q6_hvx_crit: q6-hvx-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdm_crit: mdm-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_dsp_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdm_dsp_crit: mdm-dsp-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				npu_crit: npu-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
new file mode 100644
index 000000000..5d462ae14
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 fragment for devices with Chrome bootloader
+ *
+ * This file mainly tries to abstract out the memory protections put into
+ * place by the Chrome bootloader which are different than what's put into
+ * place by Qualcomm's typical bootloader. It also has a smattering of other
+ * things that will hold true for any conceivable Chrome design
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the setup for Chrome boards.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &reserved_xbl_uefi_log;
+/delete-node/ &sec_apps_mem;
+
+/ {
+	reserved-memory {
+		adsp_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ad00000 {
+			reg = <0x0 0x8ad00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
+		wpss_mem: memory@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&lpass_aon {
+	status = "okay";
+};
+
+&lpass_core {
+	status = "okay";
+};
+
+&lpass_hm {
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&pdc_reset {
+	status = "okay";
+};
+
+/* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */
+&pmk8350_pon {
+	status = "disabled";
+};
+
+/*
+ * Chrome designs always boot from SPI flash hooked up to the qspi.
+ *
+ * It's expected that all boards will support "dual SPI" at 37.5 MHz.
+ * If some boards need a different speed or have a package that allows
+ * Quad SPI together with WP then those boards can easily override.
+ */
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&remoteproc_wpss {
+	status = "okay";
+	firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt";
+};
+
+&scm {
+	/* TF-A firmware maps memory cached so mark dma-coherent to match. */
+	dma-coherent;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+
+	wifi-firmware {
+		iommus = <&apps_smmu 0x1c02 0x1>;
+	};
+};
+
+/* PINCTRL - chrome-common pinctrl */
+
+&tlmm {
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
new file mode 100644
index 000000000..afae7f46b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD board device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+#include "sc7280-idp-ec-h1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)";
+	compatible = "qcom,sc7280-crd",
+		     "google,hoglin-rev3", "google,hoglin-rev4",
+		     "google,piglin-rev3", "google,piglin-rev4",
+		     "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-2 {
+		compatible = "qcom,pmg1110-rpmh-regulators";
+		qcom,pmic-id = "k";
+
+		vreg_s1k_1p0: smps1 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+	};
+};
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&vreg_l18b_1p8>;
+
+		wakeup-source;
+	};
+};
+
+ap_ts_pen_1v8: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&vreg_l19b_1p8>;
+	};
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
+
+&nvme_pwren {
+	pins = "gpio51";
+};
+
+&sound {
+	audio-routing =
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC3", "MIC BIAS3",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
+&wcd9385 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+	pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+	us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio7";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ts_int_l: ts-int-l-state {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio81";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
new file mode 100644
index 000000000..a90c70b1b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec and having 3 dmics connected to sc7280.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-3mic";
+
+		audio-routing = "VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb",
+				"VA DMIC2", "vdd-micb",
+				"VA DMIC3", "vdd-micb",
+
+				"Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "ALC5682";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>, <&lpass_dmic23_clk>,
+			<&lpass_dmic23_data>;
+
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 000000000..8b855345e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards
+ * using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-rt5682-max98360a-1mic";
+
+		audio-routing = "Headphone Jack", "HPOL",
+				"Headphone Jack", "HPOR";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "ALC5682";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+			};
+
+			codec {
+				sound-dai = <&alc5682 0 /* aif1 */>;
+			};
+		};
+	};
+};
+
+hp_i2c: &i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	alc5682: codec@1a {
+		compatible = "realtek,rt5682s";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_irq>;
+
+		#sound-dai-cells = <1>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+		AVDD-supply = <&pp1800_alc5682>;
+		DBVDD-supply = <&pp1800_alc5682>;
+		LDO1-IN-supply = <&pp1800_alc5682>;
+		MICVDD-supply = <&pp3300_codec>;
+
+		realtek,dmic1-data-pin = <1>;
+		realtek,dmic1-clk-pin = <2>;
+		realtek,jd-src = <1>;
+		realtek,dmic-clk-rate-hz = <2048000>;
+	};
+};
+
+&lpass_cpu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s0_data0>, <&mi2s0_data1>, <&mi2s0_mclk>, <&mi2s0_sclk>, <&mi2s0_ws>,
+			<&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+
+	dai-link@0 {
+		reg = <MI2S_PRIMARY>;
+		qcom,playback-sd-lines = <1>;
+		qcom,capture-sd-lines = <0>;
+	};
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&mi2s0_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_data1 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_mclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s0_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
new file mode 100644
index 000000000..020ef666e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 device tree source for boards using Max98360 and wcd9385 codec
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/ {
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC3", "MIC BIAS3",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360A";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "WCD9385 Playback";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "WCD9385 Capture";
+			reg = <3>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@6 {
+		reg = <LPASS_CDC_DMA_RX0>;
+	};
+
+	dai-link@19 {
+		reg = <LPASS_CDC_DMA_TX3>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
+&wcd9385 {
+	status = "okay";
+};
+
+/* PINCTRL */
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_rx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&lpass_tx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_tx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
new file mode 100644
index 000000000..4ee5f0b0a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD 3+ Pro board device tree source
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-crd.dts"
+#include "sc7280-herobrine-pro-sku.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD Pro platform (rev5+)";
+	compatible = "google,zoglin-sku1536", "google,hoglin-sku1536", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
new file mode 100644
index 000000000..df39a64da
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 CRD 3+ board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
+	compatible = "google,zoglin", "google,hoglin", "qcom,sc7280";
+
+	/* FIXED REGULATORS */
+
+	/*
+	 * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL.
+	 * However, on CRD there's an extra regulator in the way. Since this
+	 * is expected to be uncommon, we'll leave the "vreg_edp_bl" label
+	 * in the baseboard herobrine.dtsi point at "ppvar_sys" and then
+	 * make a "_crd" specific version here.
+	 */
+	vreg_edp_bl_crd: vreg-edp-bl-crd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_edp_bl_crd";
+
+		gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&apps_rsc {
+	regulators-2 {
+		compatible = "qcom,pmg1110-rpmh-regulators";
+		qcom,pmic-id = "k";
+
+		vreg_s1k_1p0: smps1 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+	};
+};
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&pp3300_left_in_mlb>;
+	};
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+	power-supply = <&vreg_edp_bl_crd>;
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+/*
+ * This pin goes to the display panel but then doesn't actually do anything
+ * on the panel itself (it doesn't connect to the touchscreen controller).
+ * We'll set a pullup here just to park the line.
+ */
+&ts_rst_conn {
+	bias-pull-up;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to CRD board and is named it gets that name.
+ * - If a pin goes to CRD board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "EDP_BL_REG_EN",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "PCIE1_RESET_N",
+			  "PCIE1_WAKE_N",
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "",
+			  "TPAD_INT_N",
+			  "",
+			  "",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "QSPI_DATA_0",
+			  "QSPI_DATA_1",
+			  "QSPI_CLK",
+			  "QSPI_CS_N_1",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics call it
+			   * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the
+			   * signal is active high).
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_N",
+			  "",
+
+			  "CAM0_RST_N",			/* 20 */
+			  "CAM1_RST_N",
+			  "SM_DBG_UART_TX",
+			  "SM_DBG_UART_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "",
+			  "HUB_RST",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "EC_SPI_MISO_GPIO40",		/* 40 */
+			  "EC_SPI_MOSI_GPIO41",
+			  "EC_SPI_CLK_GPIO42",
+			  "EC_SPI_CS_GPIO43",
+			  "",
+			  "EARLY_EUD_EN",
+			  "",
+			  "DP_HOT_PLUG_DETECT",
+			  "AP_BRD_ID_0",
+			  "AP_BRD_ID_1",
+
+			  "AP_BRD_ID_2",		/* 50 */
+			  "NVME_PWR_REG_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "",
+			  "",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "",
+			  "",
+			  "",
+			  "CCI_I2C_SDA0",
+
+			  "CCI_I2C_SCL0",		/* 70 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "PCIE1_CLK_REQ_N",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "US_EURO_HS_SEL",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CARD_DET_CONN",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 100 */
+			  "",
+			  "",
+			  "",
+			  "H1_AP_INT_N",
+			  "",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "",
+
+			  "SDM_RFFE1_DATA",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "",
+
+			  "",				/* 130 */
+			  "",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "",
+
+			  "SAR1_INT_N",			/* 140 */
+			  "SAR0_INT_N",
+			  "",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_N",
+			  "EN_PP3300_HUB",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts
new file mode 100644
index 000000000..14f20e705
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Evoker with LTE";
+	compatible = "google,evoker-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts
new file mode 100644
index 000000000..4f781fe25
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-evoker.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Evoker";
+	compatible = "google,evoker", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
new file mode 100644
index 000000000..0add7a2a0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682-3mic.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5d {
+		compatible = "goodix,gt7986u", "goodix,gt7375p";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+		vdd-supply = <&ts_avdd>;
+		mainboard-vddio-supply = <&ts_avccio>;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
new file mode 100644
index 000000000..b04888a98
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Herobrine (rev1+)";
+	compatible = "google,herobrine", "qcom,sc7280";
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+&pp3300_fp_mcu {
+	status = "okay";
+};
+
+&pp2850_vcm_wf_cam {
+	status = "okay";
+};
+
+&pp2850_wf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp1200_wf_cam {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+/*
+ * Although the trackpad is really part of the herobrine baseboard, we'll
+ * put the actual definition in the board device tree since different boards
+ * might hook up different trackpads (or no i2c trackpad at all in the case
+ * of tablets / detachables).
+ */
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+/*
+ * The touchscreen connector might come off the Qcard, at least in the case of
+ * eDP. Like the trackpad, we'll put it in the board device tree file since
+ * different boards have different touchscreens.
+ */
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&ts_avdd>;
+	};
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+/*
+ * This pin goes to the display panel but then doesn't actually do anything
+ * on the panel itself (it doesn't connect to the touchscreen controller).
+ * We'll set a pullup here just to park the line.
+ */
+&ts_rst_conn {
+	bias-pull-up;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
new file mode 100644
index 000000000..95505549a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine dts fragment for LTE SKUs
+ *
+ * Copyright 2022 Google LLC.
+ */
+/* Modem setup is different on Chrome setups than typical Qualcomm setup */
+
+/ {
+	reserved-memory {
+		mpss_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		mba_mem: memory@9c700000 {
+			reg = <0x0 0x9c700000 0x0 0x200000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
+			size = <0x0 0x4000>;
+			no-map;
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	compatible = "qcom,sc7280-mss-pil";
+
+	clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+		 <&gcc GCC_MSS_OFFLINE_AXI_CLK>,
+		 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+		 <&rpmhcc RPMH_PKA_CLK>,
+		 <&rpmhcc RPMH_CXO_CLK>;
+	clock-names = "iface", "offline", "snoc_axi", "pka", "xo";
+
+	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+	interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+	memory-region = <&mba_mem>, <&mpss_mem>, <&mdata_mem>;
+	firmware-name = "qcom/sc7280-herobrine/modem/mba.mbn",
+			"qcom/sc7280-herobrine/modem/qdsp6sw.mbn";
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+		 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+	reset-names = "mss_restart", "pdc_reset";
+
+	qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+	qcom,ext-regs = <&tcsr_2 0x10000 0x10004 &tcsr_1 0x6004 0x6008>;
+	qcom,qaccept-regs = <&tcsr_1 0x3030 0x3040 0x3020>;
+
+	status = "okay";
+};
+
+/* Increase the size from 2.5MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x9c900000 0x0 0x800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi
new file mode 100644
index 000000000..1aed02297
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-nvme-sku.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine dts fragment for NVMe SKUs
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
new file mode 100644
index 000000000..fb4bbe8ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for PRO SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/delete-node/ &vreg_s9c_0p676;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
new file mode 100644
index 000000000..73e24cc55
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev0)";
+	compatible = "google,villager-rev0", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
new file mode 100644
index 000000000..d71cc4bbc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-villager-r1.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev1+) with LTE";
+	compatible = "google,villager-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
new file mode 100644
index 000000000..edb52f12f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-villager-r1.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Villager (rev1+)";
+	compatible = "google,villager", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi
new file mode 100644
index 000000000..b25df5a99
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-villager.dtsi"
+#include "sc7280-herobrine-audio-wcd9385.dtsi"
+
+&lpass_va_macro {
+	vdd-micb-supply = <&pp1800_l2c>;
+};
+
+&sound {
+	audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
new file mode 100644
index 000000000..38c8a3679
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		hid-descr-addr = <0x20>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "elan,ekth6915";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+		vcc33-supply = <&ts_avdd>;
+		vccio-supply = <&ts_avccio>;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
new file mode 100644
index 000000000..2febd6126
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for WIFI SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */
+
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &rmtfs_mem;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
new file mode 100644
index 000000000..c9fe64529
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-lte.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	model = "Google Zombie with LTE";
+	compatible = "google,zombie-sku512", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts
new file mode 100644
index 000000000..e1fcacdcc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme-lte.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+#include "sc7280-herobrine-nvme-sku.dtsi"
+
+/ {
+	model = "Google Zombie with LTE and NVMe";
+	compatible = "google,zombie-sku514", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts
new file mode 100644
index 000000000..e3d52c560
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie-nvme.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+#include "sc7280-herobrine-nvme-sku.dtsi"
+
+/ {
+	model = "Google Zombie with NVMe";
+	compatible = "google,zombie-sku2","google,zombie-sku3","google,zombie-sku515", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
new file mode 100644
index 000000000..0246c12b2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine-zombie.dtsi"
+#include "sc7280-herobrine-wifi-sku.dtsi"
+
+/ {
+	model = "Google Zombie";
+	compatible = "google,zombie", "qcom,sc7280";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
new file mode 100644
index 000000000..a4fde22e3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Zombie board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+	status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	trackpad: trackpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		hid-descr-addr = <0x01>;
+		vdd-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+&ap_sar_sensor_i2c {
+	status = "okay";
+};
+
+&ap_sar_sensor0 {
+	status = "okay";
+};
+
+&ap_sar_sensor1 {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+};
+
+&mdss_edp_phy {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+	/* Set the PWM period to 320 microseconds (3.125kHz frequency) */
+	pwms = <&pm8350c_pwm 3 320000>;
+};
+
+&pwmleds {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+	bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "US_EURO_HS_SEL",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
new file mode 100644
index 000000000..9ea663612
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine baseboard device tree source
+ *
+ * The set of things in this file is a bit loosely defined. It's roughly
+ * defined as the set of things that the child boards happen to have in
+ * common. Since all of the child boards started from the same original
+ * design this is hopefully a large set of things but as more derivatives
+ * appear things may "bubble down" out of this file. For things that are
+ * part of the reference design but might not exist on child nodes we will
+ * follow the lead of the SoC dtsi files and leave their status as "disabled".
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "sc7280-qcard.dtsi"
+#include "sc7280-chrome-common.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/*
+	 * FIXED REGULATORS
+	 *
+	 * Sort order:
+	 * 1. parents above children.
+	 * 2. higher voltage above lower voltage.
+	 * 3. alphabetically by node name.
+	 */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_s5: pp5000-s5-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_s5";
+
+		/* EC turns on with en_pp5000_s5; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_z1: pp3300-z1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+
+		/* EC turns on with en_pp3300_z1; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 105 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp3300_left_in_mlb: pp3300-left-in-mlb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_left_in_mlb";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		regulator-enable-ramp-delay = <3000>;
+
+		/*
+		 * eDP panel specs nearly always have a spec that says you
+		 * shouldn't turn them off an on again without waiting 500ms.
+		 * Add this as a board constraint since this rail is shared
+		 * between the panel and touchscreen.
+		 */
+		off-on-delay-us = <500000>;
+
+		/*
+		 * Stat the regulator on. This has the advantage of starting
+		 * the slow process of powering the panel on as soon as we
+		 * probe the regulator. It also avoids tripping the
+		 * off-on-delay immediately on every bootup.
+		 */
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_mcu_fp:
+	pp3300_fp_ls:
+	pp3300_fp_mcu: pp3300-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp3300_hub: pp3300-hub-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* The BIOS leaves this regulator on */
+		regulator-boot-on;
+
+		gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hub_en>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_tp: pp3300-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_L18B_S0; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_ssd: pp3300-ssd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ssd";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd_en>;
+
+		/*
+		 * The bootloaer may have left PCIe configured. Powering this
+		 * off while the PCIe clocks are still running isn't great,
+		 * so it's better to default to this regulator being on.
+		 */
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_vcm_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp2850_wf_cam: pp2850-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	pp1800_fp: pp1800-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_fp";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp1800_l18b_s0>;
+		status = "disabled";
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&vreg_l19b_s0>;
+		status = "disabled";
+	};
+
+	pp1200_wf_cam: pp1200-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_wf_cam";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_z1>;
+		status = "disabled";
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	max98360a: audio-codec-0 {
+		compatible = "maxim,max98360a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	pwmleds: pwmleds {
+		compatible = "pwm-leds";
+		status = "disabled";
+		keyboard_backlight: led-0 {
+			label = "cros_ec::kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+/*
+ * ADJUSTMENTS TO QCARD REGULATORS
+ *
+ * Mostly this is just board-local names for regulators that come from
+ * Qcard, but this also has some minor regulator overrides.
+ *
+ * Names are only listed here if regulators go somewhere other than a
+ * testpoint.
+ */
+
+/* From Qcard to our board; ordered by PMIC-ID / rail number */
+
+pp1256_s8b: &vreg_s8b_1p256 {};
+
+pp1800_l18b_s0: &vreg_l18b_1p8 {};
+pp1800_l18b:    &vreg_l18b_1p8 {};
+
+vreg_l19b_s0: &vreg_l19b_1p8 {};
+
+pp1800_alc5682: &vreg_l2c_1p8 {};
+pp1800_l2c:     &vreg_l2c_1p8 {};
+
+vreg_l4c: &vreg_l4c_1p8_3p0 {};
+
+ppvar_l6c: &vreg_l6c_2p96 {};
+
+pp3000_l7c: &vreg_l7c_3p0 {};
+
+pp1800_prox: &vreg_l8c_1p8 {};
+pp1800_l8c:  &vreg_l8c_1p8 {};
+
+pp2950_l9c: &vreg_l9c_2p96 {};
+
+pp1800_lcm:  &vreg_l12c_1p8 {};
+pp1800_mipi: &vreg_l12c_1p8 {};
+pp1800_l12c: &vreg_l12c_1p8 {};
+
+pp3300_lcm:  &vreg_l13c_3p0 {};
+pp3300_mipi: &vreg_l13c_3p0 {};
+pp3300_l13c: &vreg_l13c_3p0 {};
+
+/* From our board to Qcard; ordered same as node definition above */
+
+vreg_edp_bl: &ppvar_sys {};
+
+ts_avdd:      &pp3300_left_in_mlb {};
+vreg_edp_3p3: &pp3300_left_in_mlb {};
+
+/* Regulator overrides from Qcard */
+
+/*
+ * Herobrine boards only use l2c to power an external audio codec (like
+ * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage.
+ */
+&vreg_l2c_1p8 {
+	regulator-min-microvolt = <1800000>;
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&edp_panel {
+	/* Our board provides power to the qcard for the eDP panel. */
+	power-supply = <&vreg_edp_3p3>;
+};
+
+ap_sar_sensor_i2c: &i2c1 {
+	clock-frequency = <400000>;
+	status = "disabled";
+
+	ap_sar_sensor0: proximity@28 {
+		compatible = "semtech,sx9324";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar0_irq_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <141 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp1800_prox>;
+
+		label = "proximity-wifi_cellular-0";
+		status = "disabled";
+	};
+
+	ap_sar_sensor1: proximity@2c {
+		compatible = "semtech,sx9324";
+		reg = <0x2c>;
+		#io-channel-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sar1_irq_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <140 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&pp1800_prox>;
+
+		label = "proximity-wifi_cellular-1";
+		status = "disabled";
+	};
+};
+
+ap_i2c_tpm: &i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_ap_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hot_plug_det>;
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
+};
+
+/* NVMe drive, enabled on a per-board basis */
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
+
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&pp3300_ssd>;
+};
+
+&pm8350c_pwm {
+	status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+	status = "okay";
+
+	/* Our board provides power to the qcard for the backlight */
+	power-supply = <&vreg_edp_bl>;
+};
+
+&pmk8350_rtc {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+/* SD Card, enabled on a per-board basis */
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd_odl>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd_odl>;
+
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+&spi_flash {
+	spi-max-frequency = <50000000>;
+};
+
+/* Fingerprint, enabled on a per-board basis */
+ap_spi_fp: &spi9 {
+	pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>;
+
+	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_mcu>;
+	};
+};
+
+ap_ec_spi: &spi10 {
+	status = "okay";
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		peer-hub = <&usb_hub_2_x>;
+	};
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+	drive-strength = <8>;
+};
+
+&qspi_clk {
+	bias-pull-down;		/* No external pulls */
+	drive-strength = <8>;
+};
+
+&qspi_data0 {
+	bias-pull-down;		/* No external pulls */
+	drive-strength = <8>;
+};
+
+&qspi_data1 {
+	bias-disable;		/* External pulldown */
+	drive-strength = <8>;
+};
+
+/* For ap_tp_i2c */
+&qup_i2c0_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_i2c_tpm */
+&qup_i2c14_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_spi_fp */
+&qup_spi9_data_clk {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_spi_fp */
+&qup_spi9_cs_gpio {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_data_clk {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_cs_gpio {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For uart_dbg */
+&qup_uart5_rx {
+	bias-pull-up;
+};
+
+/* For uart_dbg */
+&qup_uart5_tx {
+	bias-disable;
+	drive-strength = <2>;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm7325_gpios {
+	/*
+	 * On a quick glance it might look like KYPD_VOL_UP_N is used, but
+	 * that only passes through to a debug connector and not to the actual
+	 * volume up key.
+	 */
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pmk8350_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&tlmm {
+	/* pinctrl settings for pins that have no real owners. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_od>;
+
+	amp_en: amp-en-state {
+		pins = "gpio63";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	bios_flash_wp_od: bios-flash-wp-od-state {
+		pins = "gpio16";
+		function = "gpio";
+		/* Has external pull */
+		bias-disable;
+	};
+
+	en_fp_rails: en-fp-rails-state {
+		pins = "gpio77";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-high;
+	};
+
+	en_pp3300_codec: en-pp3300-codec-state {
+		pins = "gpio105";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio80";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	fp_rst_l: fp-rst-l-state {
+		pins = "gpio78";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l-state {
+		pins = "gpio61";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	fpmcu_boot0: fpmcu-boot0-state {
+		pins = "gpio68";
+		function = "gpio";
+		bias-disable;
+	};
+
+	gsc_ap_int_odl: gsc-ap-int-odl-state {
+		pins = "gpio104";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hp_irq: hp-irq-state {
+		pins = "gpio101";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hub_en: hub-en-state {
+		pins = "gpio157";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	pe_wake_odl: pe-wake-odl-state {
+		pins = "gpio3";
+		function = "gpio";
+		/* Has external pull */
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	/* For ap_spi_fp */
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
+		pins = "gpio39";
+		function = "gpio";
+		output-high;
+	};
+
+	/* For ap_ec_spi */
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
+		pins = "gpio43";
+		function = "gpio";
+		output-high;
+	};
+
+	sar0_irq_odl: sar0-irq-odl-state {
+		pins = "gpio141";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sar1_irq_odl: sar1-irq-odl-state {
+		pins = "gpio140";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sd_cd_odl: sd-cd-odl-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ssd_en: ssd-en-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ssd_rst_l: ssd-rst-l-state {
+		pins = "gpio2";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	tp_int_odl: tp-int-odl-state {
+		pins = "gpio7";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	wf_cam_en: wf-cam-en-state {
+		pins = "gpio119";
+		function = "gpio";
+		/* Has external pulldown */
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
new file mode 100644
index 000000000..ebae545c5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 EC/H1 over SPI (common between IDP2 and CRD)
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+ap_ec_spi: &spi10 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+ap_h1_spi: &spi14 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs_gpio_init_high>, <&qup_spi14_cs_gpio>;
+	cs-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+
+	cr50: tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&tlmm {
+	ap_ec_int_l: ap-ec-int-l-state {
+		pins = "gpio18";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio104";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
+		pins = "gpio43";
+		function = "gpio";
+		output-high;
+	};
+
+	qup_spi14_cs_gpio_init_high: qup-spi14-cs-gpio-init-high-state {
+		pins = "gpio59";
+		function = "gpio";
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
new file mode 100644
index 000000000..b5fe7356b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include "sc7280-idp.dtsi"
+#include "pmr735a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform";
+	compatible = "qcom,sc7280-idp", "google,senor", "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&apps_rsc {
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_l2e_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l3e_0p9: ldo3 {
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1020000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1890000>;
+		};
+
+		vreg_l5e_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l6e_0p8: ldo6 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+	};
+};
+
+&bluetooth {
+	vddio-supply = <&vreg_l19b_1p8>;
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&nvme_pwren {
+	pins = "gpio19";
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+};
+
+&pmk8350_vadc {
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "otg";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
new file mode 100644
index 000000000..2ff549f4d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -0,0 +1,835 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP board device tree source (common between SKU1 and SKU2)
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sc7280.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+#include "sc7280-chrome-common.dtsi"
+#include "sc7280-herobrine-lte-sku.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial1 = &uart7;
+		wifi0 = &wifi;
+	};
+
+	max98360a: audio-codec-0 {
+		compatible = "maxim,max98360a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&amp_en>;
+		sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+	wcd9385: audio-codec-1 {
+		compatible = "qcom,wcd9385-codec";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wcd_reset_n>;
+		pinctrl-1 = <&wcd_reset_n_sleep>;
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+							  500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_vol_up_default>;
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+			linux,can-disable;
+		};
+	};
+
+	nvme_3v3_regulator: nvme-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VLDO_3V3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_pwren>;
+	};
+
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS3",
+			"VA DMIC1", "MIC BIAS3",
+			"VA DMIC2", "MIC BIAS1",
+			"VA DMIC3", "MIC BIAS1",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360A";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "WCD9385 Playback";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "WCD9385 Capture";
+			reg = <3>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_s1b_1p8: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p9: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p2: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vreg_l1b_0p8: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+		};
+
+		vreg_l7b_2p9: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l8b_0p9: ldo8 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l11b_1p7: ldo11 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l12b_0p8: ldo12 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		vreg_l13b_0p8: ldo13 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		vreg_l14b_1p2: ldo14 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l15b_0p8: ldo15 {
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+		};
+
+		vreg_l16b_1p2: ldo16 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		vreg_l17b_1p8: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s1c_2p2: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s9c_1p0: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10c_0p8: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&lpass_cpu {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+	dai-link@1 {
+		reg = <MI2S_SECONDARY>;
+		qcom,playback-sd-lines = <0>;
+	};
+
+	dai-link@5 {
+		reg = <LPASS_DP_RX>;
+	};
+
+	dai-link@6 {
+		reg = <LPASS_CDC_DMA_RX0>;
+	};
+
+	dai-link@19 {
+		reg = <LPASS_CDC_DMA_TX3>;
+	};
+
+	dai-link@25 {
+		reg = <LPASS_CDC_DMA_VA_TX0>;
+	};
+};
+
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+	vdd-micb-supply = <&vreg_bob>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&nvme_3v3_regulator>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vreg_l1c_1p8>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	vmmc-supply = <&vreg_l7b_2p9>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p8>;
+};
+
+&uart7 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en>, <&sw_ctrl>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p9>;
+		vddbtcxmx-supply = <&vreg_s7b_0p9>;
+		vddrfacmn-supply = <&vreg_s7b_0p9>;
+		vddrfa0p8-supply = <&vreg_s7b_0p9>;
+		vddrfa1p7-supply = <&vreg_s1b_1p8>;
+		vddrfa1p2-supply = <&vreg_s8b_1p2>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		max-speed = <3200000>;
+	};
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&lpass_dmic01_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic01_data {
+	bias-pull-down;
+};
+
+&lpass_dmic23_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&lpass_dmic23_data {
+	bias-pull-down;
+};
+
+&lpass_rx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_rx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&lpass_tx_swr_clk {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-disable;
+};
+
+&lpass_tx_swr_data {
+	drive-strength = <2>;
+	slew-rate = <1>;
+	bias-bus-hold;
+};
+
+&mi2s1_data0 {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_sclk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&mi2s1_ws {
+	drive-strength = <6>;
+};
+
+&pm7325_gpios {
+	key_vol_up_default: key-vol-up-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+		qcom,drive-strength = <3>;
+	};
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+};
+
+&qspi_clk {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qspi_data0 {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;		/* No external pulls or external pulldown */
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&tlmm {
+	amp_en: amp-en-state {
+		pins = "gpio63";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	bt_en: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	nvme_pwren: nvme-pwren-state {
+		function = "gpio";
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sw_ctrl: sw-ctrl-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	wcd_reset_n: wcd-reset-n-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+	};
+
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
new file mode 100644
index 000000000..d4f7cab17
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 IDP2 board device tree source
+ *
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sc7280-idp.dtsi"
+#include "sc7280-idp-ec-h1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform";
+	compatible = "qcom,sc7280-idp2", "google,piglin", "qcom,sc7280";
+
+	aliases {
+		serial0 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&bluetooth {
+	vddio-supply = <&vreg_l18b_1p8>;
+};
+
+&nvme_pwren {
+	pins = "gpio51";
+};
+
+&nvme_3v3_regulator {
+	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+};
+
+&pm8350c_pwm {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
new file mode 100644
index 000000000..f9b96bd24
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 Qcard device tree source
+ *
+ * Qcard PCB has the processor, RAM, eMMC (if stuffed), and eDP connector (if
+ * stuffed) on it. This device tree tries to encapsulate all the things that
+ * all boards using Qcard will have in common. Given that there are stuffing
+ * options, some things may be left with status "disabled" and enabled in
+ * the actual board device tree files.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7280.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial0 = &uart5;
+		serial1 = &uart7;
+		wifi0 = &wifi;
+	};
+
+	wcd9385: audio-codec-1 {
+		compatible = "qcom,wcd9385-codec";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
+		pinctrl-1 = <&wcd_reset_n_sleep>, <&us_euro_hs_sel>;
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>;
+		us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-io-supply = <&vreg_l18b_1p8>;
+		vdd-buck-supply = <&vreg_l17b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000
+							  500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		#sound-dai-cells = <1>;
+
+		status = "disabled";
+	};
+
+	pm8350c_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		status = "disabled";
+
+		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_edp_bl_en>;
+		pwms = <&pm8350c_pwm 3 65535>;
+	};
+};
+
+&apps_rsc {
+	/*
+	 * Regulators are given labels corresponding to the various names
+	 * they are referred to on schematics. They are also given labels
+	 * corresponding to named voltage inputs on the SoC or components
+	 * bundled with the SoC (like radio companion chips). We totally
+	 * ignore it when one regulator is the input to another regulator.
+	 * That's handled automatically by the initial config given to
+	 * RPMH by the firmware.
+	 *
+	 * Regulators that the HLOS (High Level OS) doesn't touch at all
+	 * are left out of here since they are managed elsewhere.
+	 */
+
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd19_pmu_pcie_i:
+		vdd19_pmu_rfa_i:
+		vreg_s1b_1p856: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vdd_pmu_aon_i:
+		vdd09_pmu_rfa_i:
+		vdd095_mx_pmu:
+		vdd095_pmu:
+		vreg_s7b_0p952: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vdd13_pmu_rfa_i:
+		vdd13_pmu_pcie_i:
+		vreg_s8b_1p256: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vdd_a_usbssdp_0_core:
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_usbhs_3p1:
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_1p2:
+		vdd_a_csi_2_3_1p2:
+		vdd_a_csi_4_1p2:
+		vdd_a_dsi_0_1p2:
+		vdd_a_edp_0_1p2:
+		vdd_a_qlink_0_1p2:
+		vdd_a_qlink_1_1p2:
+		vdd_a_pcie_0_1p2:
+		vdd_a_pcie_1_1p2:
+		vdd_a_ufs_0_1p2:
+		vdd_a_usbssdp_0_1p2:
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * Despite the fact that this is named to be 2.5V on the
+		 * schematic, it powers eMMC which doesn't accept 2.5V
+		 */
+		vreg_l7b_2p5: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p8: ldo17 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px_wcd9385:
+		vdd_txrx:
+		vddpx_0:
+		vddpx_3:
+		vddpx_7:
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_1p8:
+		vdd_px_sdr735:
+		vdd_pxm:
+		vdd18_io:
+		vddio_px_1:
+		vddio_px_2:
+		vddio_px_3:
+		vddpx_ts:
+		vddpx_wl4otp:
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd22_wlbtpa_ch0:
+		vdd22_wlbtpa_ch1:
+		vdd22_wlbtppa_ch0:
+		vdd22_wlbtppa_ch1:
+		vdd22_wlpa5g_ch0:
+		vdd22_wlpa5g_ch1:
+		vdd22_wlppa5g_ch0:
+		vdd22_wlppa5g_ch1:
+		vreg_s1c_2p2: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		lp4_vdd2_1p052:
+		vreg_s9c_0p676: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_turing_q6_cs_1p8:
+		vdd_a_cxo_1p8:
+		vdd_a_qrefs_1p8:
+		vdd_a_usbhs_1p8:
+		vdd_qfprom:
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * The initial design of this regulator was to use it as 3.3V,
+		 * but due to later changes in design it was changed to 1.8V.
+		 * The original name is kept due to same schematic.
+		 */
+		ts_avccio:
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8_3p0: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8_3p0: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_0p9:
+		vdd_a_csi_2_3_0p9:
+		vdd_a_csi_4_0p9:
+		vdd_a_dsi_0_0p9:
+		vdd_a_dsi_0_pll_0p9:
+		vdd_a_edp_0_0p9:
+		vdd_a_gnss_0p9:
+		vdd_a_pcie_0_core:
+		vdd_a_pcie_1_core:
+		vdd_a_qlink_0_0p9:
+		vdd_a_qlink_0_0p9_ck:
+		vdd_a_qlink_1_0p9:
+		vdd_a_qlink_1_0p9_ck:
+		vdd_a_qrefs_0p875_0:
+		vdd_a_qrefs_0p875_1:
+		vdd_a_qrefs_0p875_2:
+		vdd_a_qrefs_0p875_3:
+		vdd_a_qrefs_0p875_4_5:
+		vdd_a_qrefs_0p875_6:
+		vdd_a_qrefs_0p875_7:
+		vdd_a_qrefs_0p875_8:
+		vdd_a_qrefs_0p875_9:
+		vdd_a_ufs_0_core:
+		vdd_a_usbhs_core:
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_flash:
+		vdd_iris_rgb:
+		vdd_mic_bias:
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&lpass_va_macro {
+	vdd-micb-supply = <&vreg_bob>;
+};
+
+/* NOTE: Not all Qcards have eDP connector stuffed */
+&mdss_edp {
+	aux-bus {
+		edp_panel: panel {
+			compatible = "edp-panel";
+
+			backlight = <&pm8350c_pwm_backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_edp_out {
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_edp_phy {
+	vdda-pll-supply = <&vdd_a_edp_0_0p9>;
+	vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pm8350c_pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_edp_bl_pwm>;
+};
+
+&pmk8350_vadc {
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vdd_qfprom>;
+};
+
+/* For eMMC. NOTE: not all Qcards have eMMC stuffed */
+&sdhc_1 {
+	vmmc-supply = <&vreg_l7b_2p5>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+&swr0 {
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr1 {
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 2 3 4>;
+	};
+};
+
+uart_dbg: &uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+mos_bt_uart: &uart7 {
+	status = "okay";
+
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mos_bt_en>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p952>;
+		vddbtcxmx-supply = <&vreg_s7b_0p952>;
+		vddrfacmn-supply = <&vreg_s7b_0p952>;
+		vddrfa0p8-supply = <&vreg_s7b_0p952>;
+		vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+		vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddio-supply = <&vreg_l18b_1p8>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdd_a_usbssdp_0_1p2>;
+	vdda-pll-supply = <&vdd_a_usbssdp_0_core>;
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+/*
+ * PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES
+ *
+ * NOTE: In general if pins leave the Qcard then the pinctrl goes in the
+ * baseboard or board device tree, not here.
+ */
+
+/* No external pull for eDP HPD, so set the internal one. */
+&edp_hot_plug_det {
+	bias-pull-down;
+};
+
+/*
+ * For ts_i2c
+ *
+ * Technically this i2c bus actually leaves the Qcard, but it leaves directly
+ * via the eDP connector (it doesn't hit the baseboard). The external pulls
+ * are on Qcard.
+ */
+&qup_i2c13_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+/* eMMC, if stuffed, is straight on the Qcard */
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+/*
+ * PINCTRL - QCARD
+ *
+ * This has entries that are defined by Qcard even if they go to the main
+ * board. In cases where the pulls may be board dependent we defer those
+ * settings to the board device tree. Drive strengths tend to be assinged here
+ * but could conceivably be overwridden by board device trees.
+ */
+
+&pm8350c_gpios {
+	pmic_edp_bl_en: pmic-edp-bl-en-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+
+	pmic_edp_bl_pwm: pmic-edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&tlmm {
+	mos_bt_en: mos-bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		output-low;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	ts_int_conn: ts-int-conn-state {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_rst_conn: ts-rst-conn-state {
+		pins = "gpio54";
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	us_euro_hs_sel: us-euro-hs-sel-state {
+		pins = "gpio81";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	wcd_reset_n: wcd-reset-n-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+	};
+
+	wcd_reset_n_sleep: wcd-reset-n-sleep-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
new file mode 100644
index 000000000..8e330d2e2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -0,0 +1,6239 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 SoC device tree source
+ *
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ */
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
+#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+#include <dt-bindings/clock/qcom,gcc-sc7280.h>
+#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sc7280.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc7280.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+	};
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_ce_mem: memory@4cd000 {
+			no-map;
+			reg = <0x0 0x004cd000 0x0 0x1000>;
+		};
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x200000>;
+			no-map;
+		};
+
+		aop_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+			no-map;
+		};
+
+		reserved_xbl_uefi_log: memory@80880000 {
+			reg = <0x0 0x80884000 0x0 0x10000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@808ff000 {
+			reg = <0x0 0x808ff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		cpucp_mem: memory@80b00000 {
+			no-map;
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+		};
+
+		wlan_fw_mem: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0xc00000>;
+			no-map;
+		};
+
+		video_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@9c900000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9c900000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+					   &LITTLE_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			cpu-idle-states = <&BIG_CPU_SLEEP_0
+					   &BIG_CPU_SLEEP_1
+					   &CLUSTER_SLEEP_0>;
+			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-down";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-down";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "cluster-power-down";
+				arm,psci-suspend-param = <0x40003444>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9926>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp_300mhz: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp_691mhz: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <800000 17817600>;
+		};
+
+		cpu0_opp_806mhz: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <800000 20889600>;
+		};
+
+		cpu0_opp_941mhz: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <1804000 24576000>;
+		};
+
+		cpu0_opp_1152mhz: opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <2188000 27033600>;
+		};
+
+		cpu0_opp_1325mhz: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 33792000>;
+		};
+
+		cpu0_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 38092800>;
+		};
+
+		cpu0_opp_1651mhz: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3072000 41779200>;
+		};
+
+		cpu0_opp_1805mhz: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 48537600>;
+		};
+
+		cpu0_opp_1958mhz: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <4068000 48537600>;
+		};
+
+		cpu0_opp_2016mhz: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp_691mhz: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <1804000 9600000>;
+		};
+
+		cpu4_opp_941mhz: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 17817600>;
+		};
+
+		cpu4_opp_1229mhz: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1344mhz: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1651mhz: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu4_opp_1901mhz: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2054mhz: opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2112mhz: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2131mhz: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2208mhz: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2400mhz: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu4_opp_2611mhz: opp-2611200000 {
+			opp-hz = /bits/ 64 <2611200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp_806mhz: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <1804000 9600000>;
+		};
+
+		cpu7_opp_1056mhz: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <2188000 17817600>;
+		};
+
+		cpu7_opp_1325mhz: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu7_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu7_opp_1766mhz: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_1862mhz: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_2035mhz: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_2112mhz: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu7_opp_2208mhz: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu7_opp_2381mhz: opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <6832000 44851200>;
+		};
+
+		cpu7_opp_2400mhz: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_2515mhz: opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_2707mhz: opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_3014mhz: opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc7280", "qcom,scm";
+		};
+	};
+
+	clk_virt: interconnect {
+		compatible = "qcom,sc7280-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_WPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <13>;
+
+		wpss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wpss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_out: wlan-ap-to-wpss {
+			qcom,entry-name = "wlan";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc7280";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+				 <0>, <&pcie1_lane>,
+				 <0>, <0>, <0>,
+				 <&usb_1_ssphy>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+				      "pcie_0_pipe_clk", "pcie_1_pipe_clk",
+				      "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SC7280_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sc7280-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sc7280-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0xa20>,
+			      <0 0x00780000 0 0xa20>,
+			      <0 0x00782000 0 0x120>,
+			      <0 0x00786000 0 0x1fff>;
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
+			power-domains = <&rpmhpd SC7280_MX>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@1e9 {
+				reg = <0x1e9 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
+			pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
+			status = "disabled";
+
+			reg = <0 0x007c4000 0 0x1000>,
+			      <0 0x007c5000 0 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			iommus = <&apps_smmu 0xc0 0x0>;
+			interrupts = <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 656 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7280_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			bus-width = <8>;
+			supports-cqe;
+			dma-coherent;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7f>;
+			iommus = <&apps_smmu 0x0136 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x009c0000 0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x123 0x0>;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@980000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00980000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00984000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@98c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@990000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00990000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@994000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00994000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_data_clk>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0099c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x43 0x0>;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a98000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>;
+				interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
+				power-domains = <&rpmhpd SC7280_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>;
+				interrupts = <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7280_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		cnoc2: interconnect@1500000 {
+			reg = <0 0x01500000 0 0x1000>;
+			compatible = "qcom,sc7280-cnoc2";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		cnoc3: interconnect@1502000 {
+			reg = <0 0x01502000 0 0x1000>;
+			compatible = "qcom,sc7280-cnoc3";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1580000 {
+			reg = <0 0x01580000 0 0x4>;
+			compatible = "qcom,sc7280-mc-virt";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			reg = <0 0x01680000 0 0x15480>;
+			compatible = "qcom,sc7280-system-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7280-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1c080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			reg = <0 0x01700000 0 0x2b080>;
+			compatible = "qcom,sc7280-aggre2-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			reg = <0 0x01740000 0 0x1e080>;
+			compatible = "qcom,sc7280-mmss-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		wifi: wifi@17a10040 {
+			compatible = "qcom,wcn6750-wifi";
+			reg = <0 0x17a10040 0 0x0>;
+			iommus = <&apps_smmu 0x1c00 0x1>;
+			interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+			qcom,rproc = <&remoteproc_wpss>;
+			memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+			status = "disabled";
+			qcom,smem-states = <&wlan_smp2p_out 0>;
+			qcom,smem-state-names = "wlan-smp2p-out";
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sc7280";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+				 <&pcie1_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_clkreq_n>;
+
+			dma-coherent;
+
+			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>,
+				      <0 0x01c0e400 0 0x200>,
+				      <0 0x01c0ea00 0 0x1f0>,
+				      <0 0x01c0e600 0 0x170>,
+				      <0 0x01c0e800 0 0x200>,
+				      <0 0x01c0ee00 0 0xf4>;
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sc7280-ipa";
+
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x482 0x0>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4ad0>,
+			      <0 0x01e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_1: syscon@1f60000 {
+			compatible = "qcom,sc7280-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tcsr_2: syscon@1fc0000 {
+			compatible = "qcom,sc7280-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x30000>;
+		};
+
+		lpasscc: lpasscc@3000000 {
+			compatible = "qcom,sc7280-lpasscc";
+			reg = <0 0x03000000 0 0x40>,
+			      <0 0x03c04000 0 0x4>;
+			reg-names = "qdsp6ss", "top_cc";
+			clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+			clock-names = "iface";
+			#clock-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_rx_macro: codec@3200000 {
+			compatible = "qcom,sc7280-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk", "npl", "fsgen";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr0: soundwire@3210000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03210000 0 0x2000>;
+
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rx_macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		lpass_tx_macro: codec@3220000 {
+			compatible = "qcom,sc7280-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk", "npl", "fsgen";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr1: soundwire@3230000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03230000 0 0x2000>;
+
+			interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_tx_macro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <3>;
+			qcom,dout-ports = <0>;
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		lpass_audiocc: clock-controller@3300000 {
+			compatible = "qcom,sc7280-lpassaudiocc";
+			reg = <0 0x03300000 0 0x30000>,
+			      <0 0x032a9000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			       <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+			clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+			power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		lpass_va_macro: codec@3370000 {
+			compatible = "qcom,sc7280-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>;
+			clock-names = "mclk";
+
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>,
+					<&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+			power-domain-names = "macro", "dcodec";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		lpass_aon: clock-controller@3380000 {
+			compatible = "qcom,sc7280-lpassaoncc";
+			reg = <0 0x03380000 0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+			       <&rpmhcc RPMH_CXO_CLK_A>,
+			       <&lpass_core LPASS_CORE_CC_CORE_CLK>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_core: clock-controller@3900000 {
+			compatible = "qcom,sc7280-lpasscorecc";
+			reg = <0 0x03900000 0 0x50000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_cpu: audio@3987000 {
+			compatible = "qcom,sc7280-lpass-cpu";
+
+			reg = <0 0x03987000 0 0x68000>,
+			      <0 0x03b00000 0 0x29000>,
+			      <0 0x03260000 0 0xc000>,
+			      <0 0x03280000 0 0x29000>,
+			      <0 0x03340000 0 0x29000>,
+			      <0 0x0336c000 0 0x3000>;
+			reg-names = "lpass-hdmiif",
+				    "lpass-lpaif",
+				    "lpass-rxtx-cdc-dma-lpm",
+				    "lpass-rxtx-lpaif",
+				    "lpass-va-lpaif",
+				    "lpass-va-cdc-dma-lpm";
+
+			iommus = <&apps_smmu 0x1820 0>,
+				 <&apps_smmu 0x1821 0>,
+				 <&apps_smmu 0x1832 0>;
+
+			power-domains = <&rpmhpd SC7280_LCX>;
+			power-domain-names = "lcx";
+			required-opps = <&rpmhpd_opp_nom>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>,
+				 <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+				 <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+				 <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+				 <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+			clock-names = "aon_cc_audio_hm_h",
+				      "audio_cc_ext_mclk0",
+				      "core_cc_sysnoc_mport_core",
+				      "core_cc_ext_if0_ibit",
+				      "core_cc_ext_if1_ibit",
+				      "audio_cc_codec_mem",
+				      "audio_cc_codec_mem0",
+				      "audio_cc_codec_mem1",
+				      "audio_cc_codec_mem2",
+				      "aon_cc_va_mem0";
+
+			#sound-dai-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpass-irq-lpaif",
+					  "lpass-irq-hdmi",
+					  "lpass-irq-vaif",
+					  "lpass-irq-rxtxif";
+
+			status = "disabled";
+		};
+
+		lpass_hm: clock-controller@3c00000 {
+			compatible = "qcom,sc7280-lpasshm";
+			reg = <0 0x03c00000 0 0x28>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "reserved"; /* Owned by ADSP firmware */
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			reg = <0 0x03c40000 0 0xf080>;
+			compatible = "qcom,sc7280-lpass-ag-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+			reg = <0 0x033c0000 0x0 0x20000>,
+				<0 0x03550000 0x0 0x10000>;
+			qcom,adsp-bypass-mode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+			lpass_dmic01_clk: dmic01-clk-state {
+				pins = "gpio6";
+				function = "dmic1_clk";
+			};
+
+			lpass_dmic01_data: dmic01-data-state {
+				pins = "gpio7";
+				function = "dmic1_data";
+			};
+
+			lpass_dmic23_clk: dmic23-clk-state {
+				pins = "gpio8";
+				function = "dmic2_clk";
+			};
+
+			lpass_dmic23_data: dmic23-data-state {
+				pins = "gpio9";
+				function = "dmic2_data";
+			};
+
+			lpass_rx_swr_clk: rx-swr-clk-state {
+				pins = "gpio3";
+				function = "swr_rx_clk";
+			};
+
+			lpass_rx_swr_data: rx-swr-data-state {
+				pins = "gpio4", "gpio5";
+				function = "swr_rx_data";
+			};
+
+			lpass_tx_swr_clk: tx-swr-clk-state {
+				pins = "gpio0";
+				function = "swr_tx_clk";
+			};
+
+			lpass_tx_swr_data: tx-swr-data-state {
+				pins = "gpio1", "gpio2", "gpio14";
+				function = "swr_tx_data";
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-635.0", "qcom,adreno";
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0x400>,
+				 <&adreno_smmu 1 0x400>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0x03>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0x03>;
+				};
+
+				/* Only applicable for SKUs which has 550Mhz as Fmax */
+				opp-550000000-0 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <8368000>;
+					opp-supported-hw = <0x01>;
+				};
+
+				opp-550000000-1 {
+					opp-hz = /bits/ 64 <550000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <6832000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-608000000 {
+					opp-hz = /bits/ 64 <608000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <8368000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-700000000 {
+					opp-hz = /bits/ 64 <700000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-812000000 {
+					opp-hz = /bits/ 64 <812000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-840000000 {
+					opp-hz = /bits/ 64 <840000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-900000000 {
+					opp-hz = /bits/ 64 <900000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x02>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+				<0 0x3de0000 0 0x10000>,
+				<0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0x400>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc7280-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dma@117f000 {
+			compatible = "qcom,sc7280-dcc", "qcom,dcc";
+			reg = <0x0 0x0117f000 0x0 0x1000>,
+			      <0x0 0x01112000 0x0 0x6000>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+					"gcc_gpu_snoc_dvm_gfx_clk",
+					"gpu_cc_ahb_clk",
+					"gpu_cc_hlos1_vote_gpu_smmu_clk",
+					"gpu_cc_cx_gmu_clk",
+					"gpu_cc_hub_cx_int_clk",
+					"gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7280-mpss-pas";
+			reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04c0 0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+			pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
+			status = "disabled";
+
+			reg = <0 0x08804000 0 0x1000>;
+
+			iommus = <&apps_smmu 0x100 0x0>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			power-domains = <&rpmhpd SC7280_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			bus-width = <4>;
+			dma-coherent;
+
+			qcom,dll-config = <0x0007642c>;
+
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <200000 0>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sc7280-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sc7280-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy-wrapper@88e9000 {
+			compatible = "qcom,sc7280-qmp-usb3-dp-phy",
+				     "qcom,sm8250-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x200>,
+			      <0 0x088e8000 0 0x40>,
+			      <0 0x088ea000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x400>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+			};
+		};
+
+		usb_2: usb@8cf8800 {
+			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
+			reg = <0 0x08cf8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x08c00000 0 0xe000>;
+				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0xa0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				usb-role-switch;
+
+				port {
+					usb2_role_switch: endpoint {
+						remote-endpoint = <&eud_ep>;
+					};
+				};
+			};
+		};
+
+		qspi: spi@88dc000 {
+			compatible = "qcom,sc7280-qspi", "qcom,qspi-v1";
+			reg = <0 0x088dc000 0 0x1000>;
+			iommus = <&apps_smmu 0x20 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0
+					&cnoc2 SLAVE_QSPI_0 0>;
+			interconnect-names = "qspi-config";
+			power-domains = <&rpmhpd SC7280_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
+			status = "disabled";
+		};
+
+		remoteproc_wpss: remoteproc@8a00000 {
+			compatible = "qcom,sc7280-wpss-pil";
+			reg = <0 0x08a00000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+				 <&gcc GCC_WPSS_AHB_CLK>,
+				 <&gcc GCC_WPSS_RSCP_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ahb_bdg", "ahb",
+				      "rscp", "xo";
+
+			power-domains = <&rpmhpd SC7280_CX>,
+					<&rpmhpd SC7280_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&wpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&wpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+				 <&pdc_reset PDC_WPSS_SYNC_RESET>;
+			reset-names = "restart", "pdc_sync";
+
+			qcom,halt-regs = <&tcsr_1 0x17000>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_WPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "wpss";
+				qcom,remote-pid = <13>;
+			};
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x09091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1804000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <2188000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <3072000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <4068000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <6220000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <6832000>;
+				};
+				opp-7 {
+					opp-peak-kBps = <8532000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2400000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <4800000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <7456000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <9600000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <12896000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <14928000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <17056000>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@90e0000 {
+			reg = <0 0x090e0000 0 0x5080>;
+			compatible = "qcom,sc7280-dc-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			reg = <0 0x09100000 0 0xe2200>;
+			compatible = "qcom,sc7280-gem-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc7280-llcc";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		eud: eud@88e0000 {
+			compatible = "qcom,sc7280-eud", "qcom,eud";
+			reg = <0 0x88e0000 0 0x2000>,
+			      <0 0x88e2000 0 0x1000>;
+			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					eud_ep: endpoint {
+						remote-endpoint = <&usb2_role_switch>;
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@a0c0000 {
+			reg = <0 0x0a0c0000 0 0x10000>;
+			compatible = "qcom,sc7280-nsp-noc";
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xe000>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0xe0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7280-venus";
+			reg = <0 0x0aa00000 0 0xd0600>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+				 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+			clock-names = "core", "bus", "iface",
+				      "vcodec_core", "vcodec_bus";
+
+			power-domains = <&videocc MVSC_GDSC>,
+					<&videocc MVS0_GDSC>,
+					<&rpmhpd SC7280_CX>;
+			power-domain-names = "venus", "vcodec0", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			iommus = <&apps_smmu 0x2180 0x20>,
+				 <&apps_smmu 0x2184 0x20>;
+			memory-region = <&video_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			video-firmware {
+				iommus = <&apps_smmu 0x21a2 0x0>;
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-335000000 {
+					opp-hz = /bits/ 64 <335000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-424000000 {
+					opp-hz = /bits/ 64 <424000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-460000048 {
+					opp-hz = /bits/ 64 <460000048>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sc7280-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&rpmhcc RPMH_CXO_CLK_A>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc7280-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&rpmhcc RPMH_CXO_CLK_A>,
+				<&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc7280-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&mdss_dsi_phy 0>,
+				 <&mdss_dsi_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>,
+				 <&mdss_edp_phy 0>,
+				 <&mdss_edp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "edp_phy_pll_link_clk",
+				      "edp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sc7280-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				<&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";
+
+			iommus = <&apps_smmu 0x900 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc7280-dpu";
+				reg = <0 0x0ae01000 0 0x8f030>,
+					<0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						<&dispcc DISP_CC_MDSS_AHB_CLK>;
+				assigned-clock-rates = <19200000>,
+							<19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf5_out: endpoint {
+							remote-endpoint = <&edp_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-380000000 {
+						opp-hz = /bits/ 64 <380000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-506666667 {
+						opp-hz = /bits/ 64 <506666667>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi: dsi@ae94000 {
+				compatible = "qcom,sc7280-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				phys = <&mdss_dsi_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi_phy: phy@ae94400 {
+				compatible = "qcom,sc7280-dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_edp: edp@aea0000 {
+				compatible = "qcom,sc7280-edp";
+				pinctrl-names = "default";
+				pinctrl-0 = <&edp_hot_plug_det>;
+
+				reg = <0 0x0aea0000 0 0x200>,
+				      <0 0x0aea0200 0 0x200>,
+				      <0 0x0aea0400 0 0xc00>,
+				      <0 0x0aea1000 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <14>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+				phys = <&mdss_edp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&edp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						edp_in: endpoint {
+							remote-endpoint = <&dpu_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_edp_out: endpoint { };
+					};
+				};
+
+				edp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_edp_phy: phy@aec2a00 {
+				compatible = "qcom,sc7280-edp-phy";
+
+				reg = <0 0x0aec2a00 0 0x19c>,
+				      <0 0x0aec2200 0 0xa0>,
+				      <0 0x0aec2600 0 0xa0>,
+				      <0 0x0aec2000 0 0x1c0>;
+
+				clocks = <&rpmhcc RPMH_CXO_CLK>,
+					 <&gcc GCC_EDP_CLKREF_EN>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sc7280-dp";
+
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0xc00>,
+				      <0 0x0ae91000 0 0x400>,
+				      <0 0x0ae91400 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+						"core_aux",
+						"ctrl_link",
+						"ctrl_link_iface",
+						"stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc7280-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,
+					  <55 306 4>, <59 312 3>, <62 374 2>,
+					  <64 434 2>, <66 438 3>, <69 86 1>,
+					  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b5e0000 {
+			compatible = "qcom,sc7280-pdc-global";
+			reg = <0 0x0b5e0000 0 0x20000>;
+			#reset-cells = <1>;
+			status = "reserved"; /* Owned by firmware */
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+				<0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc7280-tsens","qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+				<0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow","critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sc7280-pinctrl";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 175>;
+			wakeup-parent = <&pdc>;
+
+			dp_hot_plug_det: dp-hot-plug-det-state {
+				pins = "gpio47";
+				function = "dp_hot";
+			};
+
+			edp_hot_plug_det: edp-hot-plug-det-state {
+				pins = "gpio60";
+				function = "edp_hot";
+			};
+
+			mi2s0_data0: mi2s0-data0-state {
+				pins = "gpio98";
+				function = "mi2s0_data0";
+			};
+
+			mi2s0_data1: mi2s0-data1-state {
+				pins = "gpio99";
+				function = "mi2s0_data1";
+			};
+
+			mi2s0_mclk: mi2s0-mclk-state {
+				pins = "gpio96";
+				function = "pri_mi2s";
+			};
+
+			mi2s0_sclk: mi2s0-sclk-state {
+				pins = "gpio97";
+				function = "mi2s0_sck";
+			};
+
+			mi2s0_ws: mi2s0-ws-state {
+				pins = "gpio100";
+				function = "mi2s0_ws";
+			};
+
+			mi2s1_data0: mi2s1-data0-state {
+				pins = "gpio107";
+				function = "mi2s1_data0";
+			};
+
+			mi2s1_sclk: mi2s1-sclk-state {
+				pins = "gpio106";
+				function = "mi2s1_sck";
+			};
+
+			mi2s1_ws: mi2s1-ws-state {
+				pins = "gpio108";
+				function = "mi2s1_ws";
+			};
+
+			pcie1_clkreq_n: pcie1-clkreq-n-state {
+				pins = "gpio79";
+				function = "pcie1_clkreqn";
+			};
+
+			qspi_clk: qspi-clk-state {
+				pins = "gpio14";
+				function = "qspi_clk";
+			};
+
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio15";
+				function = "qspi_cs";
+			};
+
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio19";
+				function = "qspi_cs";
+			};
+
+			qspi_data0: qspi-data0-state {
+				pins = "gpio12";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio13";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
+				pins = "gpio16", "gpio17";
+				function = "qspi_data";
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio4", "gpio5";
+				function = "qup01";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio8", "gpio9";
+				function = "qup02";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio12", "gpio13";
+				function = "qup03";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio20", "gpio21";
+				function = "qup05";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio24", "gpio25";
+				function = "qup06";
+			};
+
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				pins = "gpio28", "gpio29";
+				function = "qup07";
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio32", "gpio33";
+				function = "qup10";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio36", "gpio37";
+				function = "qup11";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio40", "gpio41";
+				function = "qup12";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio44", "gpio45";
+				function = "qup13";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio48", "gpio49";
+				function = "qup14";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio52", "gpio53";
+				function = "qup15";
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio56", "gpio57";
+				function = "qup16";
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio60", "gpio61";
+				function = "qup17";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup00";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup00";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup01";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup01";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio7";
+				function = "gpio";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup02";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup02";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio11";
+				function = "gpio";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup03";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup03";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio15";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup04";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup04";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio19";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup05";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio23";
+				function = "qup05";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio24", "gpio25", "gpio26";
+				function = "qup06";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio27";
+				function = "qup06";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio27";
+				function = "gpio";
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup07";
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio31";
+				function = "qup07";
+			};
+
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+				pins = "gpio31";
+				function = "gpio";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup10";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio35";
+				function = "qup10";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio35";
+				function = "gpio";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup11";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio39";
+				function = "qup11";
+			};
+
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio39";
+				function = "gpio";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup12";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio43";
+				function = "qup12";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio43";
+				function = "gpio";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup13";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio47";
+				function = "qup13";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio47";
+				function = "gpio";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup14";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio51";
+				function = "qup14";
+			};
+
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio51";
+				function = "gpio";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup15";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio55";
+				function = "qup15";
+			};
+
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio55";
+				function = "gpio";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup16";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio59";
+				function = "qup16";
+			};
+
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio59";
+				function = "gpio";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup17";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio63";
+				function = "qup17";
+			};
+
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio63";
+				function = "gpio";
+			};
+
+			qup_uart0_cts: qup-uart0-cts-state {
+				pins = "gpio0";
+				function = "qup00";
+			};
+
+			qup_uart0_rts: qup-uart0-rts-state {
+				pins = "gpio1";
+				function = "qup00";
+			};
+
+			qup_uart0_tx: qup-uart0-tx-state {
+				pins = "gpio2";
+				function = "qup00";
+			};
+
+			qup_uart0_rx: qup-uart0-rx-state {
+				pins = "gpio3";
+				function = "qup00";
+			};
+
+			qup_uart1_cts: qup-uart1-cts-state {
+				pins = "gpio4";
+				function = "qup01";
+			};
+
+			qup_uart1_rts: qup-uart1-rts-state {
+				pins = "gpio5";
+				function = "qup01";
+			};
+
+			qup_uart1_tx: qup-uart1-tx-state {
+				pins = "gpio6";
+				function = "qup01";
+			};
+
+			qup_uart1_rx: qup-uart1-rx-state {
+				pins = "gpio7";
+				function = "qup01";
+			};
+
+			qup_uart2_cts: qup-uart2-cts-state {
+				pins = "gpio8";
+				function = "qup02";
+			};
+
+			qup_uart2_rts: qup-uart2-rts-state {
+				pins = "gpio9";
+				function = "qup02";
+			};
+
+			qup_uart2_tx: qup-uart2-tx-state {
+				pins = "gpio10";
+				function = "qup02";
+			};
+
+			qup_uart2_rx: qup-uart2-rx-state {
+				pins = "gpio11";
+				function = "qup02";
+			};
+
+			qup_uart3_cts: qup-uart3-cts-state {
+				pins = "gpio12";
+				function = "qup03";
+			};
+
+			qup_uart3_rts: qup-uart3-rts-state {
+				pins = "gpio13";
+				function = "qup03";
+			};
+
+			qup_uart3_tx: qup-uart3-tx-state {
+				pins = "gpio14";
+				function = "qup03";
+			};
+
+			qup_uart3_rx: qup-uart3-rx-state {
+				pins = "gpio15";
+				function = "qup03";
+			};
+
+			qup_uart4_cts: qup-uart4-cts-state {
+				pins = "gpio16";
+				function = "qup04";
+			};
+
+			qup_uart4_rts: qup-uart4-rts-state {
+				pins = "gpio17";
+				function = "qup04";
+			};
+
+			qup_uart4_tx: qup-uart4-tx-state {
+				pins = "gpio18";
+				function = "qup04";
+			};
+
+			qup_uart4_rx: qup-uart4-rx-state {
+				pins = "gpio19";
+				function = "qup04";
+			};
+
+			qup_uart5_cts: qup-uart5-cts-state {
+				pins = "gpio20";
+				function = "qup05";
+			};
+
+			qup_uart5_rts: qup-uart5-rts-state {
+				pins = "gpio21";
+				function = "qup05";
+			};
+
+			qup_uart5_tx: qup-uart5-tx-state {
+				pins = "gpio22";
+				function = "qup05";
+			};
+
+			qup_uart5_rx: qup-uart5-rx-state {
+				pins = "gpio23";
+				function = "qup05";
+			};
+
+			qup_uart6_cts: qup-uart6-cts-state {
+				pins = "gpio24";
+				function = "qup06";
+			};
+
+			qup_uart6_rts: qup-uart6-rts-state {
+				pins = "gpio25";
+				function = "qup06";
+			};
+
+			qup_uart6_tx: qup-uart6-tx-state {
+				pins = "gpio26";
+				function = "qup06";
+			};
+
+			qup_uart6_rx: qup-uart6-rx-state {
+				pins = "gpio27";
+				function = "qup06";
+			};
+
+			qup_uart7_cts: qup-uart7-cts-state {
+				pins = "gpio28";
+				function = "qup07";
+			};
+
+			qup_uart7_rts: qup-uart7-rts-state {
+				pins = "gpio29";
+				function = "qup07";
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio30";
+				function = "qup07";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio31";
+				function = "qup07";
+			};
+
+			qup_uart8_cts: qup-uart8-cts-state {
+				pins = "gpio32";
+				function = "qup10";
+			};
+
+			qup_uart8_rts: qup-uart8-rts-state {
+				pins = "gpio33";
+				function = "qup10";
+			};
+
+			qup_uart8_tx: qup-uart8-tx-state {
+				pins = "gpio34";
+				function = "qup10";
+			};
+
+			qup_uart8_rx: qup-uart8-rx-state {
+				pins = "gpio35";
+				function = "qup10";
+			};
+
+			qup_uart9_cts: qup-uart9-cts-state {
+				pins = "gpio36";
+				function = "qup11";
+			};
+
+			qup_uart9_rts: qup-uart9-rts-state {
+				pins = "gpio37";
+				function = "qup11";
+			};
+
+			qup_uart9_tx: qup-uart9-tx-state {
+				pins = "gpio38";
+				function = "qup11";
+			};
+
+			qup_uart9_rx: qup-uart9-rx-state {
+				pins = "gpio39";
+				function = "qup11";
+			};
+
+			qup_uart10_cts: qup-uart10-cts-state {
+				pins = "gpio40";
+				function = "qup12";
+			};
+
+			qup_uart10_rts: qup-uart10-rts-state {
+				pins = "gpio41";
+				function = "qup12";
+			};
+
+			qup_uart10_tx: qup-uart10-tx-state {
+				pins = "gpio42";
+				function = "qup12";
+			};
+
+			qup_uart10_rx: qup-uart10-rx-state {
+				pins = "gpio43";
+				function = "qup12";
+			};
+
+			qup_uart11_cts: qup-uart11-cts-state {
+				pins = "gpio44";
+				function = "qup13";
+			};
+
+			qup_uart11_rts: qup-uart11-rts-state {
+				pins = "gpio45";
+				function = "qup13";
+			};
+
+			qup_uart11_tx: qup-uart11-tx-state {
+				pins = "gpio46";
+				function = "qup13";
+			};
+
+			qup_uart11_rx: qup-uart11-rx-state {
+				pins = "gpio47";
+				function = "qup13";
+			};
+
+			qup_uart12_cts: qup-uart12-cts-state {
+				pins = "gpio48";
+				function = "qup14";
+			};
+
+			qup_uart12_rts: qup-uart12-rts-state {
+				pins = "gpio49";
+				function = "qup14";
+			};
+
+			qup_uart12_tx: qup-uart12-tx-state {
+				pins = "gpio50";
+				function = "qup14";
+			};
+
+			qup_uart12_rx: qup-uart12-rx-state {
+				pins = "gpio51";
+				function = "qup14";
+			};
+
+			qup_uart13_cts: qup-uart13-cts-state {
+				pins = "gpio52";
+				function = "qup15";
+			};
+
+			qup_uart13_rts: qup-uart13-rts-state {
+				pins = "gpio53";
+				function = "qup15";
+			};
+
+			qup_uart13_tx: qup-uart13-tx-state {
+				pins = "gpio54";
+				function = "qup15";
+			};
+
+			qup_uart13_rx: qup-uart13-rx-state {
+				pins = "gpio55";
+				function = "qup15";
+			};
+
+			qup_uart14_cts: qup-uart14-cts-state {
+				pins = "gpio56";
+				function = "qup16";
+			};
+
+			qup_uart14_rts: qup-uart14-rts-state {
+				pins = "gpio57";
+				function = "qup16";
+			};
+
+			qup_uart14_tx: qup-uart14-tx-state {
+				pins = "gpio58";
+				function = "qup16";
+			};
+
+			qup_uart14_rx: qup-uart14-rx-state {
+				pins = "gpio59";
+				function = "qup16";
+			};
+
+			qup_uart15_cts: qup-uart15-cts-state {
+				pins = "gpio60";
+				function = "qup17";
+			};
+
+			qup_uart15_rts: qup-uart15-rts-state {
+				pins = "gpio61";
+				function = "qup17";
+			};
+
+			qup_uart15_tx: qup-uart15-tx-state {
+				pins = "gpio62";
+				function = "qup17";
+			};
+
+			qup_uart15_rx: qup-uart15-rx-state {
+				pins = "gpio63";
+				function = "qup17";
+			};
+
+			sdc1_clk: sdc1-clk-state {
+				pins = "sdc1_clk";
+			};
+
+			sdc1_cmd: sdc1-cmd-state {
+				pins = "sdc1_cmd";
+			};
+
+			sdc1_data: sdc1-data-state {
+				pins = "sdc1_data";
+			};
+
+			sdc1_rclk: sdc1-rclk-state {
+				pins = "sdc1_rclk";
+			};
+
+			sdc1_clk_sleep: sdc1-clk-sleep-state {
+				pins = "sdc1_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_cmd_sleep: sdc1-cmd-sleep-state {
+				pins = "sdc1_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_data_sleep: sdc1-data-sleep-state {
+				pins = "sdc1_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_rclk_sleep: sdc1-rclk-sleep-state {
+				pins = "sdc1_rclk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_clk: sdc2-clk-state {
+				pins = "sdc2_clk";
+			};
+
+			sdc2_cmd: sdc2-cmd-state {
+				pins = "sdc2_cmd";
+			};
+
+			sdc2_data: sdc2-data-state {
+				pins = "sdc2_data";
+			};
+
+			sdc2_clk_sleep: sdc2-clk-sleep-state {
+				pins = "sdc2_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_cmd_sleep: sdc2-cmd-sleep-state {
+				pins = "sdc2_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_data_sleep: sdc2-data-sleep-state {
+				pins = "sdc2_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+		};
+
+		sram@146a5000 {
+			compatible = "qcom,sc7280-imem", "syscon", "simple-mfd";
+			reg = <0 0x146a5000 0 0x6000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146a5000 0x6000>;
+
+			pil-reloc@594c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x594c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc7280-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			dma-coherent;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17a40000 0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		watchdog: watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+			status = "reserved"; /* Owned by Gunyah hyp */
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c20000 0 0x1000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x18200000 0 0x10000>,
+			      <0 0x18210000 0 0x10000>,
+			      <0 0x18220000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7280-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_low_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_turbo: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc7280-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+		};
+
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu8-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu8_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu8_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu8_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu8_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu9-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu9_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu9_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu9_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu9_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu10-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu10_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu10_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu10_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu10_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu10_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu11-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu11_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu11_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu11_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu11_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu11_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss0_crit: aoss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				aoss1_crit: aoss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss0_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cpuss1_crit: cluster0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpuss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss0_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpuss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpuss1_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		nspss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				nspss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nspss0_crit: nspss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		nspss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				nspss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				nspss1_crit: nspss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdmss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss0_crit: mdmss0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				mdmss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss1_crit: mdmss1-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				mdmss2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss2_crit: mdmss2-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdmss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				mdmss3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				mdmss3_crit: mdmss3-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				camera0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				camera0_crit: camera0-crit {
+					temperature = <110000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
new file mode 100644
index 000000000..abc66613c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc8180x.dtsi"
+#include "sc8180x-pmics.dtsi"
+
+/ {
+	model = "Lenovo Flex 5G";
+	compatible = "lenovo,flex-5g", "qcom,sc8180x";
+
+	aliases {
+		serial0 = &uart13;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8180c_lpg 4 1000000>;
+		enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bl_pwm_default>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_active_state>;
+		pinctrl-names = "default";
+
+		lid-switch {
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_prim_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_prim_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usbprim_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_sec_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_sec_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usbsec_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		rmtfs_mem: rmtfs-region@85500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85500000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		wlan_mem: wlan-region@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x3000000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@90800000 {
+			reg = <0x0 0x90800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		gpu_mem: gpu-region@98715000 {
+			reg = <0x0 0x98715000 0x0 0x2000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@98900000 {
+			reg = <0x0 0x98900000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	usbprim-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbprim_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbprim_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usbsec-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbsec_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbsec_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p3: ldo9 {
+			regulator-min-microvolt = <1296000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmc8180c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s6c_1p35: smps6 {
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1372000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s4e_0p98: smps4 {
+			regulator-min-microvolt = <992000>;
+			regulator-max-microvolt = <992000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_2p05: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e_2p9: ldo10 {
+			regulator-min-microvolt = <2904000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16e_3p0: ldo16 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	hid@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+
+	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	hid@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	hid@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_prim_qmpphy_dp_in>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_sec_qmpphy_dp_in>;
+};
+
+&mdss_edp {
+	data-lanes = <0 1 2 3>;
+
+	pinctrl-0 = <&edp_hpd_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			no-hpd;
+
+			backlight = <&backlight>;
+
+			port {
+				auo_b140han06_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_edp_out: endpoint {
+				remote-endpoint = <&auo_b140han06_in>;
+			};
+		};
+	};
+};
+
+&pcie3 {
+	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&pcie3_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&pmc8180c_lpg {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qcadsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	memory-region = <&cdsp_mem>;
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qccdsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_mem>;
+	firmware-name = "qcom/sc8180x/LENOVO/82AK/qcmpss8180_nm.mbn";
+
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-0 = <&uart13_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3998-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l9a_1p3>;
+		vddch0-supply = <&vreg_l11c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10e_2p9>;
+	vcc-max-microamp = <155000>;
+
+	vccq2-supply = <&vreg_l7e_1p8>;
+	vccq2-max-microamp = <425000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&usb_prim_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_prim_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_prim {
+	status = "okay";
+};
+
+&usb_prim_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_prim_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_prim_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_prim_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_sec_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp1_out>;
+};
+
+&usb_sec_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_sec_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_sec {
+	status = "okay";
+};
+
+&usb_sec_dwc3 {
+	dr_mode = "host";
+};
+
+&wifi {
+	memory-region = <&wlan_mem>;
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&pmc8180c_gpios {
+	bl_pwm_default: bl-pwm-default-state {
+		en-pins {
+			pins = "gpio8";
+			function = "normal";
+		};
+
+		pwm-pins {
+			pins = "gpio10";
+			function = "func1";
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
+
+	edp_hpd_active: epd-hpd-active-state {
+		pins = "gpio10";
+		function = "edp_hot";
+	};
+
+	hall_int_active_state: hall-int-active-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	i2c1_active: i2c1-active-state {
+		pins = "gpio114", "gpio115";
+		function = "qup1";
+
+		bias-pull-up = <1>;
+		drive-strength = <2>;
+	};
+
+	i2c1_hid_active: i2c1-hid-active-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c7_active: i2c7-active-state {
+		pins = "gpio98", "gpio99";
+		function = "qup7";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c7_hid_active: i2c7-hid-active-state {
+		pins = "gpio37", "gpio24";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	pcie3_default_state: pcie3-default-state {
+		clkreq-pins {
+			pins = "gpio179";
+			function = "pci_e3";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio180";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usbprim_sbu_default: usbprim-sbu-state {
+		oe-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio100";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usbsec_sbu_default: usbsec-sbu-state {
+		oe-n-pins {
+			pins = "gpio188";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio187";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	uart13_state: uart13-state {
+		cts-pins {
+			pins = "gpio43";
+			function = "qup13";
+			bias-pull-down;
+		};
+
+		rts-tx-pins {
+			pins = "gpio44", "gpio45";
+			function = "qup13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio46";
+			function = "qup13";
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
new file mode 100644
index 000000000..ddc84282f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2023, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+
+/ {
+	thermal-zones {
+		pmc8180-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmc8180_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pmc8180c-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pmc8180c_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmc8180_0: pmic@0 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+
+				status = "disabled";
+			};
+		};
+
+		pmc8180_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmc8180_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8180_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmc8180_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
+		pmc8180_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pmc8180", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@2 {
+		compatible = "qcom,smb2351", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@85 {
+				reg = <0x85>;
+				qcom,pre-scaling = <1 1>;
+				label = "vcoin2";
+			};
+		};
+	};
+
+	pmic@6 {
+		compatible = "qcom,pm8150c", "qcom,spmi-pmic";
+		reg = <0x6 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@8 {
+		compatible = "qcom,pm8150", "qcom,spmi-pmic";
+		reg = <0x8 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@a {
+		compatible = "qcom,smb2351", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@85 {
+				reg = <0x85>;
+				qcom,pre-scaling = <1 1>;
+				label = "vcoin";
+			};
+		};
+	};
+
+	pmic@4 {
+		compatible = "qcom,pm8150c", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+
+			status = "disabled";
+		};
+
+		pmc8180c_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8180c_adc: adc@3100 {
+			compatible = "qcom,spmi-adc5";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+
+			channel@0 {
+				reg = <ADC5_REF_GND>;
+				qcom,pre-scaling = <1 1>;
+				label = "ref_gnd";
+			};
+
+			channel@1 {
+				reg = <ADC5_1P25VREF>;
+				qcom,pre-scaling = <1 1>;
+				label = "vref_1p25";
+			};
+
+			channel@6 {
+				reg = <ADC5_DIE_TEMP>;
+				qcom,pre-scaling = <1 1>;
+				label = "die_temp";
+			};
+		};
+
+		pmc8180c_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pmc8180c_gpios: gpio@c000 {
+			compatible = "qcom,pmc8180c-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pmc8180c_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@5 {
+		compatible = "qcom,pmc8180c", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+
+		pmc8180c_lpg: pwm {
+			compatible = "qcom,pmc8180c-lpg";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
new file mode 100644
index 000000000..ae008c3b0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc8180x.dtsi"
+#include "sc8180x-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SC8180x Primus";
+	compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
+
+	aliases {
+		serial0 = &uart12;
+		serial1 = &uart13;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8180c_lpg 4 1000000>;
+		enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwm_default>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_active_state>;
+
+		lid-switch {
+			gpios = <&tlmm 121 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_prim_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_prim_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usbprim_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_sec_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_sec_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usbsec_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		rmtfs_mem: rmtfs-region@85500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85500000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		wlan_mem: wlan-region@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@96e00000 {
+			reg = <0x0 0x96e00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x9600000>;
+			no-map;
+		};
+
+		gpu_mem: gpu-region@98a00000 {
+			reg = <0x0 0x98a00000 0x0 0x2000>;
+			no-map;
+		};
+
+		reserved-region@9a500000 {
+			reg = <0x0 0x9a500000 0x0 0x600000>;
+			no-map;
+		};
+	};
+
+	vreg_nvme_0p9: nvme-0p9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_nvme_0p9";
+
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_nvme_3p3: nvme-3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_nvme_3p3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8180c_gpios 11 0>;
+		enable-active-high;
+
+		regulator-always-on;
+	};
+
+	vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_kb_tp_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-always-on;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kb_tp_3v3_en_active_state>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	usbprim-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbprim_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbprim_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usbsec-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbsec_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbsec_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2100000>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p3: ldo9 {
+			regulator-min-microvolt = <1296000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmc8180c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s6c_1p35: smps6 {
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1372000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p8: smps8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_3p3: ldo4 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3350000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8180-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s4e_0p98: smps4 {
+			regulator-min-microvolt = <992000>;
+			regulator-max-microvolt = <992000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_2p05: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e_2p9: ldo10 {
+			regulator-min-microvolt = <2904000>;
+			regulator-max-microvolt = <2904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12e: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16e_3p0: ldo16 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&ts_i2c_active_state>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		vdd-supply = <&vreg_l4c_3p3>;
+		vddl-supply = <&vreg_l12e>;
+
+		post-power-on-delay-ms = <20>;
+
+		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_active_state>;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&aux_i2c_active_state>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_active_state>;
+
+		vdd-supply = <&vdd_kb_tp_3v3>;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kb_int_active_state>;
+
+		vdd-supply = <&vdd_kb_tp_3v3>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_prim_qmpphy_dp_in>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_sec_qmpphy_dp_in>;
+};
+
+&mdss_edp {
+	data-lanes = <0 1 2 3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd_active>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+
+			port {
+				auo_b133han05_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss_edp_out: endpoint {
+				remote-endpoint = <&auo_b133han05_in>;
+			};
+		};
+	};
+};
+
+&pcie1 {
+	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&pmc8180c_lpg {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	memory-region = <&adsp_mem>;
+	firmware-name = "qcom/sc8180x/qcadsp8180.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	memory-region = <&mpss_mem>;
+	firmware-name = "qcom/sc8180x/qcmpss8180.mbn";
+
+	status = "okay";
+};
+
+&uart12 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart13 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart13_state>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3998-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l9a_1p3>;
+		vddch0-supply = <&vreg_l11c_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10e_2p9>;
+	vcc-max-microamp = <155000>;
+
+	vccq2-supply = <&vreg_l7e_1p8>;
+	vccq2-max-microamp = <425000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5e_0p88>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+
+	status = "okay";
+};
+
+&usb_prim_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_prim_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_prim {
+	status = "okay";
+};
+
+&usb_prim_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_prim_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_prim_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_prim_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_sec_hsphy {
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l16e_3p0>;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy {
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5e_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_sec_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp1_out>;
+};
+
+&usb_sec_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_sec_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_sec {
+	status = "okay";
+};
+
+&usb_sec_dwc3 {
+	dr_mode = "host";
+};
+
+&wifi {
+	memory-region = <&wlan_mem>;
+
+	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&pmc8180c_gpios {
+	bl_pwm_default: bl-pwm-default-state {
+		en-pins {
+			pins = "gpio8";
+			function = "normal";
+		};
+
+		pwm-pins {
+			pins = "gpio10";
+			function = "func1";
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
+
+	aux_i2c_active_state: aux-i2c-active-state {
+		pins = "gpio98", "gpio99";
+		function = "qup7";
+
+		bias-disable;
+		drive-strength = <16>;
+	};
+
+	edp_hpd_active: epd-hpd-active-state {
+		pins = "gpio10";
+		function = "edp_hot";
+	};
+
+	hall_int_active_state: hall-int-active-state {
+		pins = "gpio121";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	kb_int_active_state: kb-int-active-state {
+		int-n-pins {
+			pins = "gpio37";
+			function = "gpio";
+
+			bias-pull-up;
+		};
+
+		kp-disable-pins {
+			pins = "gpio135";
+			function = "gpio";
+
+			output-high;
+		};
+	};
+
+	kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
+		pins = "gpio4";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	pcie2_default_state: pcie2-default-state {
+		clkreq-pins {
+			pins = "gpio176";
+			function = "pci_e2";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio177";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	usbprim_sbu_default: usbprim-sbu-state {
+		oe-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio100";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usbsec_sbu_default: usbsec-sbu-state {
+		oe-n-pins {
+			pins = "gpio188";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio187";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	tp_int_active_state: tp-int-active-state {
+		tp-int-pins {
+			pins = "gpio24";
+			function = "gpio";
+
+			bias-disable;
+		};
+
+		tp-close-n-pins {
+			pins = "gpio116";
+			function = "gpio";
+
+			bias-disable;
+		};
+	};
+
+	ts_active_state: ts-active-state {
+		int-n-pins {
+			pins = "gpio122";
+			function = "gpio";
+
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio54";
+			function = "gpio";
+
+			output-high;
+		};
+	};
+
+	ts_i2c_active_state: ts-i2c-active-state {
+		pins = "gpio114", "gpio115";
+		function = "qup1";
+
+		/* External pull up */
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	uart13_state: uart13-state {
+		cts-pins {
+			pins = "gpio43";
+			function = "qup13";
+			bias-pull-down;
+		};
+
+		rts-tx-pins {
+			pins = "gpio44", "gpio45";
+			function = "qup13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio46";
+			function = "qup13";
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
new file mode 100644
index 000000000..f9e929bfa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -0,0 +1,4050 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020-2023, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc8180x.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-unified;
+				cache-level = <2>;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <355>;
+				exit-latency-us = <909>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <241>;
+				exit-latency-us = <1461>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100a344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <800000 15974400>;
+		};
+
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <2188000 25804800>;
+		};
+
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <2188000 31948800>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1804000 15974400>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <2188000 22732800>;
+		};
+
+		opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 25804800>;
+		};
+
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <4068000 43008000>;
+		};
+
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 43008000>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <6220000 49152000>;
+		};
+
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 49152000>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <8368000 49152000>;
+		};
+
+		opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2918400000 {
+			opp-hz = /bits/ 64 <2918400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc8180x", "qcom,scm";
+		};
+	};
+
+	camnoc_virt: interconnect-camnoc-virt {
+		compatible = "qcom,sc8180x-camnoc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sc8180x-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	qup_virt: interconnect-qup-virt {
+		compatible = "qcom,sc8180x-qup-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp@85700000 {
+			reg = <0x0 0x85700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl@85d00000 {
+			reg = <0x0 0x85d00000 0x0 0x140000>;
+			no-map;
+		};
+
+		aop_mem: aop@85f00000 {
+			reg = <0x0 0x85f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db: cmd-db@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
+		reserved@85f40000 {
+			reg = <0x0 0x85f40000 0x0 0x10000>;
+			no-map;
+		};
+
+		smem_mem: smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		reserved@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3900000>;
+			no-map;
+		};
+
+		reserved@89b00000 {
+			reg = <0x0 0x89b00000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		reserved@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x1000000>;
+			no-map;
+		};
+
+		reserved@9e400000 {
+			reg = <0x0 0x9e400000 0x0 0x1400000>;
+			no-map;
+		};
+
+		reserved@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		modem_smp2p_ipa_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_ipa_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		modem_smp2p_wlan_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc8180x";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x4c3 0>;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@89c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x603 0>;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c16: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart16: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_2: geniqup@cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00cc0000 0x0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			iommus = <&apps_smmu 0x7a3 0>;
+			status = "disabled";
+
+			i2c17: i2c@c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart17: serial@c80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c18: i2c@c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@c84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c84000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c19: i2c@c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart19: serial@c88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c88000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c13: i2c@c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart13: serial@c8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c14: i2c@c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart14: serial@c90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c90000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c15: i2c@c94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@c94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart15: serial@c94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00c94000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc8180x-config-noc";
+			reg = <0 0x01500000 0 0x7400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc8180x-system-noc";
+			reg = <0 0x01620000 0 0x19400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc8180x-aggre1-noc";
+			reg = <0 0x016e0000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sc8180x-aggre2-noc";
+			reg = <0 0x01700000 0 0x20000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1720000 {
+			compatible = "qcom,sc8180x-compute-noc";
+			reg = <0 0x01720000 0 0x7000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc8180x-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1d80 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
+				    <0x100 &apps_smmu 0x1d81 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c06000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie3: pci@1c08000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1e00 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
+				    <0x100 &apps_smmu 0x1e01 0x1>;
+
+			resets = <&gcc GCC_PCIE_3_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie3_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie3_phy: phy@1c0c000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c0c000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3_pipe_clk";
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_3_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c10000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c10000 0 0x3000>,
+			      <0 0x68000000 0 0xf1d>,
+			      <0 0x68000f20 0 0xa8>,
+			      <0 0x68001000 0 0x1000>,
+			      <0 0x68100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1c80 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c16000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c16000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		pcie2: pci@1c18000 {
+			compatible = "qcom,pcie-sc8180x";
+			reg = <0 0x01c18000 0 0x3000>,
+			      <0 0x70000000 0 0xf1d>,
+			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70001000 0 0x1000>,
+			      <0 0x70100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <4>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommus = <&apps_smmu 0x1d00 0x7f>;
+			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
+				    <0x100 &apps_smmu 0x1d01 0x1>;
+
+			resets = <&gcc GCC_PCIE_2_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2_GDSC>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			phys = <&pcie2_phy>;
+			phy-names = "pciephy";
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@1c1c000 {
+			compatible = "qcom,sc8180x-qmp-pcie-phy";
+			reg = <0 0x01c1c000 0 0x1000>;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2_pipe_clk";
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sc8180x-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			iommus = <&apps_smmu 0x300 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <37500000 300000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy-wrapper@1d87000 {
+			compatible = "qcom,sc8180x-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sc8180x-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		gpu: gpu@2c00000 {
+			compatible = "qcom,adreno-680.1", "qcom,adreno";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0xc01>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "gfx-mem";
+
+			qcom,gmu = <&gmu>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-514000000 {
+					opp-hz = /bits/ 64 <514000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-461000000 {
+					opp-hz = /bits/ 64 <461000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-405000000 {
+					opp-hz = /bits/ 64 <405000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-256000000 {
+					opp-hz = /bits/ 64 <256000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-177000000 {
+					opp-hz = /bits/ 64 <177000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible = "qcom,adreno-gmu-680.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu",
+				    "gmu_pdc",
+				    "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0xc00>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sc8180x-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sc8180x-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sc8180x-tlmm";
+			reg = <0 0x03100000 0 0x300000>,
+			      <0 0x03500000 0 0x700000>,
+			      <0 0x03d00000 0 0x300000>;
+			reg-names = "west", "east", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 191>;
+			wakeup-parent = <&pdc>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc8180x-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8180X_CX>,
+					<&rpmhpd SC8180X_MSS>;
+			power-domain-names = "cx", "mss";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,sc8180x-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8180X_CX>;
+			power-domain-names = "cx";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apss_shared 4>;
+			};
+		};
+
+		usb_prim_hsphy: phy@88e2000 {
+			compatible = "qcom,sc8180x-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_sec_hsphy: phy@88e3000 {
+			compatible = "qcom,sc8180x-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_prim_qmpphy: phy@88e9000 {
+			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
+			reg-names = "reg-base", "dp_com";
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "ref",
+				      "com_aux";
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_prim_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_prim_qmpphy_dp_in: endpoint {};
+				};
+			};
+
+			usb_prim_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_prim_phy_pipe_clk_src";
+			};
+
+			usb_prim_dpphy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb_sec_qmpphy: phy@88ee000 {
+			compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
+			reg = <0 0x088ee000 0 0x18c>,
+			      <0 0x088ed000 0 0x10>,
+			      <0 0x088ef000 0 0x40>;
+			reg-names = "reg-base", "dp_com";
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux",
+				      "ref_clk_src",
+				      "ref",
+				      "com_aux";
+			resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_sec_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_sec_qmpphy_dp_in: endpoint {};
+				};
+			};
+
+			usb_sec_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088ee200 0 0x200>,
+				      <0 0x088ee400 0 0x200>,
+				      <0 0x088eec00 0 0x218>,
+				      <0 0x088ee600 0 0x200>,
+				      <0 0x088ee800 0 0x200>,
+				      <0 0x088eea00 0 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_sec_phy_pipe_clk_src";
+			};
+
+			usb_sec_dpphy: dp-phy@88ef200 {
+				reg = <0 0x088ef200 0 0x200>,
+				      <0 0x088ef400 0 0x200>,
+				      <0 0x088efa00 0 0x200>,
+				      <0 0x088ef600 0 0x200>,
+				      <0 0x088ef800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+				clock-output-names = "qmp_dptx1_phy_pll_link_clk",
+						     "qmp_dptx1_phy_pll_vco_div_clk";
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc8180x-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc8180x-gem-noc";
+			reg = <0 0x09680000 0 0x58200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_prim: usb@a6f8800 {
+			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "mock_utmi",
+				      "sleep",
+				      "xo";
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			status = "disabled";
+
+			usb_prim_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x140 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_prim_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_sec: usb@a8f8800 {
+			compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "mock_utmi",
+				      "sleep",
+				      "xo";
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			status = "disabled";
+
+			usb_sec_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x160 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_sec_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		mdss: mdss@ae00000 {
+			compatible = "qcom,sc8180x-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "nrt_bus",
+				      "core";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x800 0x420>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: mdp@ae01000 {
+				compatible = "qcom,sc8180x-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						dpu_intf4_out: endpoint {
+							remote-endpoint = <&dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						dpu_intf5_out: endpoint {
+							remote-endpoint = <&edp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: dsi-phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: dsi-phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8180x-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae90a00 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_prim_dpphy 0>, <&usb_prim_dpphy 1>;
+
+				phys = <&usb_prim_dpphy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp0_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+
+				dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8180x-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae98a00 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <13>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
+				assigned-clock-parents = <&usb_sec_dpphy 0>, <&usb_sec_dpphy 1>;
+
+				phys = <&usb_sec_dpphy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp0_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp1_in: endpoint {
+							remote-endpoint = <&dpu_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp1_out: endpoint {
+						};
+					};
+				};
+
+				dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_edp: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8180x-edp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9aa00 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <14>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					       "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&edp_phy 0>, <&edp_phy 1>;
+
+				phys = <&edp_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&edp_opp_table>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						edp_in: endpoint {
+							remote-endpoint = <&dpu_intf5_out>;
+						};
+					};
+				};
+
+				edp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		edp_phy: phy@aec2a00 {
+			compatible = "qcom,sc8180x-edp-phy";
+			reg = <0 0x0aec2a00 0 0x1c0>,
+			      <0 0x0aec2200 0 0xa0>,
+			      <0 0x0aec2600 0 0xa0>,
+			      <0 0x0aec2000 0 0x19c>;
+
+			clocks = <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sc8180x-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&usb_prim_dpphy 0>,
+				 <&usb_prim_dpphy 1>,
+				 <&usb_sec_dpphy 0>,
+				 <&usb_sec_dpphy 1>,
+				 <&edp_phy 0>,
+				 <&edp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "dptx1_phy_pll_link_clk",
+				      "dptx1_phy_pll_vco_div_clk",
+				      "edp_phy_pll_link_clk",
+				      "edp_phy_pll_vco_div_clk";
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc8180x-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc8180x-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-controller@c300000 {
+			compatible = "qcom,sc8180x-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x100000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc8180x-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>;
+
+		};
+
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,sc8180x-adsp-pas";
+			reg = <0x0 0x17300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8180X_CX>;
+			power-domain-names = "cx";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sc8180x-apss-shared";
+			reg = <0x0 0x17c00000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+
+			frame@17c21000 {
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17c23000 {
+				reg = <0x17c23000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				reg = <0x17c25000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				reg = <0x17c26000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				reg = <0x17c29000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				reg = <0x17c2b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				reg = <0x17c2d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   1>,
+					  <WAKE_TCS    1>,
+					  <CONTROL_TCS 0>;
+			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc8180x-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc8180x-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sc8180x-osm-l3", "qcom,osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		lmh@18350800 {
+			compatible = "qcom,sc8180x-lmh";
+			reg = <0 0x18350800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh@18358800 {
+			compatible = "qcom,sc8180x-lmh";
+			reg = <0 0x18358800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			clock-names = "cxo_ref_clk_pin";
+			clocks = <&rpmhcc RPMH_RF_CLK2>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x0640 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster-crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-dsp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
new file mode 100644
index 000000000..ffc440642
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -0,0 +1,1032 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Qualcomm SC8280XP CRD";
+	compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c21 = &i2c21;
+		serial0 = &uart17;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8280c_lpg 3 1000000>;
+		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_BL";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_PWR_WLAN";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l3-l5-supply = <&vreg_s11b>;
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp3 {
+	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			backlight = <&backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_default>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts0_default>;
+	};
+};
+
+&i2c21 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c21_default>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpad_default>;
+
+		wakeup-source;
+	};
+
+	keyboard@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kybd_default>;
+
+		wakeup-source;
+	};
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmc8280c_lpg {
+	status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&sdc2 {
+	pinctrl-0 = <&sdc2_default_state>;
+	pinctrl-1 = <&sdc2_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
+	vmmc-supply = <&vreg_l9c>;
+	vqmmc-supply = <&vreg_l6c>;
+
+	cd-gpios = <&tlmm 131 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l3d>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */
+
+&pmc8280_1_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio8";
+		function = "normal";
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio9";
+		function = "normal";
+	};
+
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio2";
+		function = "normal";
+	};
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280c_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>;
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c21_default: i2c21-default-state {
+		pins = "gpio81", "gpio82";
+		function = "qup21";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		disable-pins {
+			pins = "gpio102";
+			function = "gpio";
+			output-low;
+		};
+
+		int-n-pins {
+			pins = "gpio104";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio105";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		card-detect-pins {
+			pins = "gpio131";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	sdc2_sleep_state: sdc2-sleep-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		card-detect-pins {
+			pins = "gpio131";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		int-n-pins {
+			pins = "gpio182";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		mode-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
new file mode 100644
index 000000000..f2055899a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -0,0 +1,1526 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Lenovo ThinkPad X13s";
+	compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp";
+
+	aliases {
+		i2c4 = &i2c4;
+		i2c21 = &i2c21;
+		serial1 = &uart2;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmc8280c_lpg 3 1000000>;
+		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hall_int_n_default>;
+
+		switch-lid {
+			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_indicator_en>;
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_role_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&mdss0_dp3 {
+	compatible = "qcom,sc8280xp-edp";
+
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss0_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	compatible = "qcom,sc8280xp-edp-phy";
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_default>;
+
+	status = "okay";
+
+	/* FIXME: verify */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts0_default>;
+	};
+};
+
+&i2c21 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c21_default>, <&tpad_default>;
+
+	status = "okay";
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		wakeup-source;
+	};
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		wakeup-source;
+	};
+
+	keyboard@68 {
+		compatible = "hid-over-i2c";
+		reg = <0x68>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&kybd_default>;
+
+		wakeup-source;
+	};
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+
+	pcie@0 {
+		device_type = "pci";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		bus-range = <0x01 0xff>;
+
+		wifi@0 {
+			compatible = "pci17cb,1103";
+			reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+			qcom,ath11k-calibration-variant = "LE_X13S";
+		};
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmc8280c_lpg {
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	status = "okay";
+
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_die_temp";
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@103 {
+		reg = <PM8350_ADC7_DIE_TEMP(1)>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_1_die_temp";
+	};
+
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@303 {
+		reg = <PM8350_ADC7_DIE_TEMP(3)>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmc8280_2_die_temp";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmr735a_die_temp";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-LENOVO-X13S";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
+		"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_default>;
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_default>;
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddio-supply = <&vreg_s10b>;
+		vddbtcxmx-supply = <&vreg_s12b>;
+		vddrfacmn-supply = <&vreg_s12b>;
+		vddrfa0p8-supply = <&vreg_s12b>;
+		vddrfa1p2-supply = <&vreg_s11b>;
+		vddrfa1p7-supply = <&vreg_s1c>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_0_role_switch {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&usb_1_role_switch {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio8";
+		function = "normal";
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio9";
+		function = "normal";
+	};
+
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmc8280c_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
+
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio28";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio107";
+		function = "gpio";
+		bias-disable;
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	i2c21_default: i2c21-default-state {
+		pins = "gpio81", "gpio82";
+		function = "qup21";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		disable-pins {
+			pins = "gpio102";
+			function = "gpio";
+			output-low;
+		};
+
+		int-n-pins {
+			pins = "gpio104";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-pins {
+			pins = "gpio105";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		int-n-pins {
+			pins = "gpio182";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
new file mode 100644
index 000000000..80ee12ded
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pm8280_1_thermal: pm8280-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8280_2_thermal: pm8280-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmk8280: pmic@0 {
+		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8280_pon: pon@1300 {
+			compatible = "qcom,pmk8350-pon";
+			reg = <0x1300>, <0x800>;
+			reg-names = "hlos", "pbs";
+
+			pmk8280_pon_pwrkey: pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+				status = "disabled";
+			};
+
+			pmk8280_pon_resin: resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				status = "disabled";
+			};
+		};
+
+		pmk8280_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8280_adc_tm: adc-tm@3400 {
+			compatible = "qcom,spmi-adc-tm5-gen2";
+			reg = <0x3400>;
+			interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8280_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			wakeup-source;
+			status = "disabled";
+		};
+
+		pmk8280_sdam_6: nvram@8500 {
+			compatible = "qcom,spmi-sdam";
+			reg = <0x8500>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x8500 0x100>;
+			status = "disabled";
+		};
+	};
+
+	pmc8280_1: pmic@1 {
+		compatible = "qcom,pm8350", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8280_1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8280_1_gpios: gpio@8800 {
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8280_1_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmc8280c: pmic@2 {
+		compatible = "qcom,pm8350c", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmc8280c_gpios: gpio@8800 {
+			compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8280c_gpios 0 0 9>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmc8280c_lpg: pwm {
+			compatible = "qcom,pm8350c-pwm";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			#pwm-cells = <2>;
+
+			status = "disabled";
+		};
+	};
+
+	pmc8280_2: pmic@3 {
+		compatible = "qcom,pm8350", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8280_2_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmc8280_2_gpios: gpio@8800 {
+			compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmc8280_2_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmr735a: pmic@4 {
+		compatible = "qcom,pmr735a", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmr735a_gpios: gpio@8800 {
+			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmr735a_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
new file mode 100644
index 000000000..b80815131
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -0,0 +1,5222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,gpucc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sc8280xp.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78c";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <602>;
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1c";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <355>;
+				exit-latency-us = <909>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <241>;
+				exit-latency-us = <1461>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sc8280xp", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+		};
+	};
+
+	aggre1_noc: interconnect-aggre1-noc {
+		compatible = "qcom,sc8280xp-aggre1-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	aggre2_noc: interconnect-aggre2-noc {
+		compatible = "qcom,sc8280xp-aggre2-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	clk_virt: interconnect-clk-virt {
+		compatible = "qcom,sc8280xp-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	config_noc: interconnect-config-noc {
+		compatible = "qcom,sc8280xp-config-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	dc_noc: interconnect-dc-noc {
+		compatible = "qcom,sc8280xp-dc-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	gem_noc: interconnect-gem-noc {
+		compatible = "qcom,sc8280xp-gem-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	lpass_noc: interconnect-lpass-ag-noc {
+		compatible = "qcom,sc8280xp-lpass-ag-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-mc-virt {
+		compatible = "qcom,sc8280xp-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mmss_noc: interconnect-mmss-noc {
+		compatible = "qcom,sc8280xp-mmss-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspa_noc: interconnect-nspa-noc {
+		compatible = "qcom,sc8280xp-nspa-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	nspb_noc: interconnect-nspb-noc {
+		compatible = "qcom,sc8280xp-nspb-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	system_noc: interconnect-system-noc {
+		compatible = "qcom,sc8280xp-system-noc";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <(384000 * 32)>;
+		};
+		opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <(480000 * 32)>;
+		};
+		opp-595200000 {
+			opp-hz = /bits/ 64 <595200000>;
+			opp-peak-kBps = <(576000 * 32)>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(672000 * 32)>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <(768000 * 32)>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1075200 * 32)>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1267200 * 32)>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-peak-kBps = <(1363200 * 32)>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1536000 * 32)>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(1612800 * 32)>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2227200000 {
+			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2438400000 {
+			opp-hz = /bits/ 64 <2438400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <(768000 * 32)>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(864000 * 32)>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <(960000 * 32)>;
+		};
+		opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <(1267200 * 32)>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1363200 * 32)>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1459200 * 32)>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(1612800 * 32)>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2496000000 {
+			opp-hz = /bits/ 64 <2496000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2592000000 {
+			opp-hz = /bits/ 64 <2592000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2688000000 {
+			opp-hz = /bits/ 64 <2688000000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2899200000 {
+			opp-hz = /bits/ 64 <2899200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+		opp-2995200000 {
+			opp-hz = /bits/ 64 <2995200000>;
+			opp-peak-kBps = <(1689600 * 32)>;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		reserved-region@80000000 {
+			reg = <0 0x80000000 0 0x860000>;
+			no-map;
+		};
+
+		cmd_db: cmd-db-region@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x80860000 0 0x20000>;
+			no-map;
+		};
+
+		reserved-region@80880000 {
+			reg = <0 0x80880000 0 0x80000>;
+			no-map;
+		};
+
+		smem_mem: smem-region@80900000 {
+			compatible = "qcom,smem";
+			reg = <0 0x80900000 0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		reserved-region@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		reserved-region@83b00000 {
+			reg = <0 0x83b00000 0 0x1700000>;
+			no-map;
+		};
+
+		reserved-region@85b00000 {
+			reg = <0 0x85b00000 0 0xc00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: adsp-region@86c00000 {
+			reg = <0 0x86c00000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_nsp0_mem: cdsp0-region@8a100000 {
+			reg = <0 0x8a100000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_nsp1_mem: cdsp1-region@8c600000 {
+			reg = <0 0x8c600000 0 0x1e00000>;
+			no-map;
+		};
+
+		reserved-region@aeb00000 {
+			reg = <0 0xaeb00000 0 0x16600000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-nsp0 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_nsp0_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_nsp0_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-nsp1 {
+		compatible = "qcom,smp2p";
+		qcom,smem = <617>, <616>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_NSP1
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <12>;
+
+		smp2p_nsp1_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_nsp1_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		ethernet0: ethernet@20000 {
+			compatible = "qcom,sc8280xp-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			clocks = <&gcc GCC_EMAC0_AXI_CLK>,
+				 <&gcc GCC_EMAC0_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC0_PTP_CLK>,
+				 <&gcc GCC_EMAC0_RGMII_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "rgmii";
+
+			interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 936 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			iommus = <&apps_smmu 0x4c0 0xf>;
+			power-domains = <&gcc EMAC_0_GDSC>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sc8280xp";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&pcie2a_phy>,
+				 <&pcie2b_phy>,
+				 <&pcie3a_phy>,
+				 <&pcie3b_phy>,
+				 <&pcie4_phy>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_CX>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qup2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0xa3 0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c16: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi16: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c17: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi17: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart17: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c18: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi18: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c19: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi19: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c20: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi20: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c21: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi21: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c22: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi22: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c23: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi23: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		qup0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x009c0000 0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x563 0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		qup1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x83 0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x010d3000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		pcie4: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x30000000 0x0 0xf1d>,
+			      <0x0 0x30000f20 0x0 0xa8>,
+			      <0x0 0x30001000 0x0 0x1000>,
+			      <0x0 0x30100000 0x0 0x100000>,
+			      <0x0 0x01c03000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x30200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x30300000 0x0 0x30300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <6>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE4_QX_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf",
+				      "cnoc_qx";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_4 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_4_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			phys = <&pcie4_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie4_phy: phy@1c06000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c06000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_CLKREF_CLK>,
+				 <&gcc GCC_PCIE4_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_4_PIPE_CLK>,
+				 <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE4_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_4_GDSC>;
+
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_4_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3b: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x32000000 0x0 0xf1d>,
+			      <0x0 0x32000f20 0x0 0xa8>,
+			      <0x0 0x32001000 0x0 0x1000>,
+			      <0x0 0x32100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x32200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x32300000 0x0 0x32300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			phys = <&pcie3b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3b_phy: phy@1c0e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
+				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie3a: pcie@1c10000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c10000 0x0 0x3000>,
+			      <0x0 0x34000000 0x0 0xf1d>,
+			      <0x0 0x34000f20 0x0 0xa8>,
+			      <0x0 0x34001000 0x0 0x1000>,
+			      <0x0 0x34100000 0x0 0x100000>,
+			      <0x0 0x01c13000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x34200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x34300000 0x0 0x34300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <4>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_3A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_3A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_3A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_3A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_3A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			phys = <&pcie3a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie3a_phy: phy@1c14000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c14000 0x0 0x2000>,
+			      <0x0 0x01c16000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
+				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_3A3B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_3A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE3A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_3A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_3A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 1>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2b: pcie@1c18000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c18000 0x0 0x3000>,
+			      <0x0 0x38000000 0x0 0xf1d>,
+			      <0x0 0x38000f20 0x0 0xa8>,
+			      <0x0 0x38001000 0x0 0x1000>,
+			      <0x0 0x38100000 0x0 0x100000>,
+			      <0x0 0x01c1b000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x38200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x38300000 0x0 0x38300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2B_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2B_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2B_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2B 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2B 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2B_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			phys = <&pcie2b_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2b_phy: phy@1c1e000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x2-pcie-phy";
+			reg = <0x0 0x01c1e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
+				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2B_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2B_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2B_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2B_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2b_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie2a: pcie@1c20000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sc8280xp";
+			reg = <0x0 0x01c20000 0x0 0x3000>,
+			      <0x0 0x3c000000 0x0 0xf1d>,
+			      <0x0 0x3c000f20 0x0 0xa8>,
+			      <0x0 0x3c001000 0x0 0x1000>,
+			      <0x0 0x3c100000 0x0 0x100000>,
+			      <0x0 0x01c23000 0x0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <2>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr_4",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_2A_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			phys = <&pcie2a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie2a_phy: phy@1c24000 {
+			compatible = "qcom,sc8280xp-qmp-gen3x4-pcie-phy";
+			reg = <0x0 0x01c24000 0x0 0x2000>,
+			      <0x0 0x01c26000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2A2B_CLKREF_CLK>,
+				 <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2A_PIPEDIV2_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe", "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE2A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_2A_GDSC>;
+
+			resets = <&gcc GCC_PCIE_2A_PHY_BCR>;
+			reset-names = "phy";
+
+			qcom,4ln-config-sel = <&tcsr 0xa044 0>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_2a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sc8280xp-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_CARD_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_card_hc: ufs@1da4000 {
+			compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01da4000 0 0x3000>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_card_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_CARD_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
+
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			dma-coherent;
+
+			clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+				 <&gcc GCC_UFS_CARD_AHB_CLK>,
+				 <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
+				 <&gcc GCC_UFS_REF_CLKREF_CLK>,
+				 <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			freq-table-hz = <75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+			status = "disabled";
+		};
+
+		ufs_card_phy: phy@1da7000 {
+			compatible = "qcom,sc8280xp-qmp-ufs-phy";
+			reg = <0 0x01da7000 0 0x1000>;
+
+			clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+				 <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_CARD_GDSC>;
+
+			resets = <&ufs_card_hc 0>;
+			reset-names = "ufsphy";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sc8280xp-tcsr", "syscon";
+			reg = <0x0 0x01fc0000 0x0 0x30000>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-690.0", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&gpu_smmu 0 0xc00>, <&gpu_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-270000000 {
+					opp-hz = /bits/ 64 <270000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <451000>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-547000000 {
+					opp-hz = /bits/ 64 <547000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-peak-kBps = <1555000>;
+				};
+
+				opp-606000000 {
+					opp-hz = /bits/ 64 <606000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-640000000 {
+					opp-hz = /bits/ 64 <640000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-655000000 {
+					opp-hz = /bits/ 64 <655000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <2736000>;
+				};
+
+				opp-690000000 {
+					opp-hz = /bits/ 64 <690000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <2736000>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-690.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&gpu_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sc8280xp-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+
+			power-domains = <&rpmhpd SC8280XP_GFX>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		gpu_smmu: iommu@3da0000 {
+			compatible = "qcom,sc8280xp-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			dma-coherent;
+		};
+
+		usb_0_hsphy: phy@88e5000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e5000 0 0x400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy0: phy@88e7000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e7000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy1: phy@88e8000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e8000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy2: phy@88e9000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088e9000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_hsphy3: phy@88ea000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x088ea000 0 0x400>;
+			clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy0: phy@88ef000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088ef000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_2_qmpphy1: phy@88f1000 {
+			compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+			reg = <0 0x088f1000 0 0x2000>;
+
+			clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+			clock-names = "aux", "ref", "com_aux", "pipe";
+
+			resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+				 <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			power-domains = <&gcc USB30_MP_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "usb2_phy1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		remoteproc_adsp: remoteproc@3000000 {
+			compatible = "qcom,sc8280xp-adsp-pas";
+			reg = <0 0x03000000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8280XP_LCX>,
+					<&rpmhpd SC8280XP_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x0c01 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		rxmacro: rxmacro@3200000 {
+			compatible = "qcom,sc8280xp-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			clock-output-names = "mclk";
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_default>;
+
+			status = "disabled";
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+			label = "RX";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		txmacro: txmacro@3220000 {
+			compatible = "qcom,sc8280xp-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_default>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+			clock-output-names = "mclk";
+
+			#clock-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sc8280xp-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_default>;
+
+			status = "disabled";
+		};
+
+		swr0: soundwire-controller@3250000 {
+			reg = <0 0x03250000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.6.0";
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+			reset-names = "swr_audio_cgcr";
+			label = "WSA";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		lpass_audiocc: clock-controller@32a9000 {
+			compatible = "qcom,sc8280xp-lpassaudiocc";
+			reg = <0 0x032a9000 0 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		swr2: soundwire-controller@3330000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0 0x03330000 0 0x2000>;
+			interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>;
+			reset-names = "swr_audio_cgcr";
+			label = "TX";
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x00 0x02 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x01>;
+
+			status = "disabled";
+		};
+
+		vamacro: codec@3370000 {
+			compatible = "qcom,sc8280xp-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
+			reg = <0 0x33c0000 0x0 0x20000>,
+			      <0 0x3550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 19>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			status = "disabled";
+
+			tx_swr_default: tx-swr-default-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_default: rx-swr-default-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic01_sleep: dmic01-sleep-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_sleep: dmic02-sleep-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
+			wsa_swr_default: wsa-swr-default-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_default: wsa2-swr-default-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpasscc: clock-controller@33e0000 {
+			compatible = "qcom,sc8280xp-lpasscc";
+			reg = <0 0x033e0000 0 0x12000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		sdc2: mmc@8804000 {
+			compatible = "qcom,sc8280xp-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4e0 0x0>;
+			power-domains = <&rpmhpd SC8280XP_CX>;
+			operating-points-v2 = <&sdc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <200000 0>;
+				};
+			};
+		};
+
+		usb_0_qmpphy: phy@88eb000 {
+			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+			reg = <0 0x088eb000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_0_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_0_qmpphy_dp_in: endpoint {};
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@8902000 {
+			compatible = "qcom,sc8280xp-usb-hs-phy",
+				     "qcom,usb-snps-hs-5nm-phy";
+			reg = <0 0x08902000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_1_qmpphy: phy@8903000 {
+			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+			reg = <0 0x08903000 0 0x4000>;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB4_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+				 <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {};
+				};
+			};
+		};
+
+		mdss1_dp0_phy: phy@8909a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x08909a00 0 0x19c>,
+			      <0 0x08909200 0 0xec>,
+			      <0 0x08909600 0 0xec>,
+			      <0 0x08909000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp1_phy: phy@890ca00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0890ca00 0 0x19c>,
+			      <0 0x0890c200 0 0xec>,
+			      <0 0x0890c600 0 0xec>,
+			      <0 0x0890c000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sc8280xp-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x09091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1720000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <2086000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <2597000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <2929000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <3879000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <5161000>;
+				};
+				opp-7 {
+					opp-peak-kBps = <5931000>;
+				};
+				opp-8 {
+					opp-peak-kBps = <6515000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <7980000>;
+				};
+				opp-10 {
+					opp-peak-kBps = <8136000>;
+				};
+				opp-11 {
+					opp-peak-kBps = <10437000>;
+				};
+				opp-12 {
+					opp-peak-kBps = <12191000>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sc8280xp-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+				opp-6 {
+					opp-peak-kBps = <15258001>;
+				};
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sc8280xp-llcc";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09400000 0 0x58000>, <0 0x09480000 0 0x58000>,
+			      <0 0x09500000 0 0x58000>, <0 0x09580000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc4_base", "llcc5_base",
+				    "llcc6_base", "llcc7_base",  "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		usb_0: usb@a6f8800 {
+			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_0_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x820 0x0>;
+				phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_0_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a8f8800 {
+			compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
+				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			wakeup-source;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x860 0x0>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				port {
+					usb_1_role_switch: endpoint {
+					};
+				};
+			};
+		};
+
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+			iommus = <&apps_smmu 0x1000 0x402>;
+			power-domains = <&dispcc0 MDSS_GDSC>;
+			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss0_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss0_intf5_out: endpoint {
+							remote-endpoint = <&mdss0_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss0_intf6_out: endpoint {
+							remote-endpoint = <&mdss0_dp2_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&mdss0_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@ae98000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae98000 0 0x200>,
+				      <0 0xae98200 0 0x200>,
+				      <0 0xae98400 0 0x600>,
+				      <0 0xae99000 0 0x400>,
+				      <0 0xae99400 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&mdss0_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint {
+						};
+					};
+				};
+
+				mdss0_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp2: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9b000 0 0x400>,
+				      <0 0xae9b400 0 0x400>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss0>;
+				interrupts = <14>;
+				phys = <&mdss0_dp2_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+				operating-points-v2 = <&mdss0_dp2_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp2_in: endpoint {
+							remote-endpoint = <&mdss0_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp3: displayport-controller@aea0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0x600>,
+				      <0 0xaea1000 0 0x400>,
+				      <0 0xaea1400 0 0x400>;
+
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss0>;
+				interrupts = <15>;
+				phys = <&mdss0_dp3_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+				operating-points-v2 = <&mdss0_dp3_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp3_in: endpoint {
+							remote-endpoint = <&mdss0_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss0_dp2_phy: phy@aec2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec2a00 0 0x19c>,
+			      <0 0x0aec2200 0 0xec>,
+			      <0 0x0aec2600 0 0xec>,
+			      <0 0x0aec2000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss0_dp3_phy: phy@aec5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec5a00 0 0x19c>,
+			      <0 0x0aec5200 0 0xec>,
+			      <0 0x0aec5600 0 0xec>,
+			      <0 0x0aec5000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sc8280xp-dispcc0";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <&mdss0_dp2_phy 0>,
+				 <&mdss0_dp2_phy 1>,
+				 <&mdss0_dp3_phy 0>,
+				 <&mdss0_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>,
+					  <40 140 14>,
+					  <54 263 1>,
+					  <55 306 4>,
+					  <59 312 3>,
+					  <62 374 2>,
+					  <64 434 2>,
+					  <66 438 3>,
+					  <69 86 1>,
+					  <70 520 54>,
+					  <124 609 28>,
+					  <159 638 1>,
+					  <160 720 8>,
+					  <168 801 1>,
+					  <169 728 30>,
+					  <199 416 2>,
+					  <201 449 1>,
+					  <202 89 1>,
+					  <203 451 1>,
+					  <204 462 1>,
+					  <205 264 1>,
+					  <206 579 1>,
+					  <207 653 1>,
+					  <208 656 1>,
+					  <209 659 1>,
+					  <210 122 1>,
+					  <211 699 1>,
+					  <212 705 1>,
+					  <213 450 1>,
+					  <214 643 1>,
+					  <216 646 5>,
+					  <221 390 5>,
+					  <226 700 3>,
+					  <229 240 3>,
+					  <232 269 1>,
+					  <233 377 1>,
+					  <234 372 1>,
+					  <235 138 1>,
+					  <236 857 1>,
+					  <237 860 1>,
+					  <238 137 1>,
+					  <239 668 1>,
+					  <240 366 1>,
+					  <241 949 1>,
+					  <242 815 5>,
+					  <247 769 1>,
+					  <248 768 1>,
+					  <249 663 1>,
+					  <250 799 2>,
+					  <252 798 1>,
+					  <253 765 1>,
+					  <254 763 1>,
+					  <255 454 1>,
+					  <258 139 1>,
+					  <259 786 2>,
+					  <261 370 2>,
+					  <263 158 2>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sc8280xp-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 230>;
+			wakeup-parent = <&pdc>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17a40000 0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x0 0x20000000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c26000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+			label = "apps_rsc";
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sc8280xp-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board_clk>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc8280xp-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc8280xp-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		remoteproc_nsp0: remoteproc@1b300000 {
+			compatible = "qcom,sc8280xp-nsp0-pas";
+			reg = <0 0x1b300000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8280XP_NSP>;
+			power-domain-names = "nsp";
+
+			memory-region = <&pil_nsp0_mem>;
+
+			qcom,smem-states = <&smp2p_nsp0_out 0>;
+			qcom,smem-state-names = "stop";
+
+			interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "nsp0";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x3181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x3182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x3183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x3184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x3185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x3186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x3187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x3188 0x0420>;
+					};
+
+					compute-cb@9 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <9>;
+						iommus = <&apps_smmu 0x318b 0x0420>;
+					};
+
+					compute-cb@10 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <10>;
+						iommus = <&apps_smmu 0x318b 0x0420>;
+					};
+
+					compute-cb@11 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <11>;
+						iommus = <&apps_smmu 0x318c 0x0420>;
+					};
+
+					compute-cb@12 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <12>;
+						iommus = <&apps_smmu 0x318d 0x0420>;
+					};
+
+					compute-cb@13 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <13>;
+						iommus = <&apps_smmu 0x318e 0x0420>;
+					};
+
+					compute-cb@14 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <14>;
+						iommus = <&apps_smmu 0x318f 0x0420>;
+					};
+				};
+			};
+		};
+
+		remoteproc_nsp1: remoteproc@21300000 {
+			compatible = "qcom,sc8280xp-nsp1-pas";
+			reg = <0 0x21300000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SC8280XP_NSP>;
+			power-domain-names = "nsp";
+
+			memory-region = <&pil_nsp1_mem>;
+
+			qcom,smem-states = <&smp2p_nsp1_out 0>;
+			qcom,smem-state-names = "stop";
+
+			interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_NSP1
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "nsp1";
+				qcom,remote-pid = <12>;
+			};
+		};
+
+		mdss1: display-subsystem@22000000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x22000000 0 0x1000>;
+			reg-names = "mdss";
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&apps_smmu 0x1800 0x402>;
+			power-domains = <&dispcc1 MDSS_GDSC>;
+			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss1_mdp: display-controller@22001000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x22001000 0 0x8f000>,
+				      <0 0x220b0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				interrupt-parent = <&mdss1>;
+				interrupts = <0>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdss1_mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss1_intf5_out: endpoint {
+							remote-endpoint = <&mdss1_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss1_intf6_out: endpoint {
+							remote-endpoint = <&mdss1_dp2_in>;
+						};
+					};
+				};
+
+				mdss1_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss1_dp0: displayport-controller@22090000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22090000 0 0x200>,
+				      <0 0x22090200 0 0x200>,
+				      <0 0x22090400 0 0x600>,
+				      <0 0x22091000 0 0x400>,
+				      <0 0x22091400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+				operating-points-v2 = <&mdss1_dp0_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&mdss1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp1: displayport-controller@22098000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22098000 0 0x200>,
+				      <0 0x22098200 0 0x200>,
+				      <0 0x22098400 0 0x600>,
+				      <0 0x22099000 0 0x400>,
+				      <0 0x22099400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+				operating-points-v2 = <&mdss1_dp1_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&mdss1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp2: displayport-controller@2209a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x2209a000 0 0x200>,
+				      <0 0x2209a200 0 0x200>,
+				      <0 0x2209a400 0 0x600>,
+				      <0 0x2209b000 0 0x400>,
+				      <0 0x2209b400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <14>;
+				phys = <&mdss1_dp2_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+				operating-points-v2 = <&mdss1_dp2_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp2_in: endpoint {
+							remote-endpoint = <&mdss1_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp3: displayport-controller@220a0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x220a0000 0 0x200>,
+				      <0 0x220a0200 0 0x200>,
+				      <0 0x220a0400 0 0x600>,
+				      <0 0x220a1000 0 0x400>,
+				      <0 0x220a1400 0 0x400>;
+
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				interrupt-parent = <&mdss1>;
+				interrupts = <15>;
+				phys = <&mdss1_dp3_phy>;
+				phy-names = "dp";
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+				operating-points-v2 = <&mdss1_dp3_opp_table>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp3_in: endpoint {
+							remote-endpoint = <&mdss1_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss1_dp2_phy: phy@220c2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c2a00 0 0x19c>,
+			      <0 0x220c2200 0 0xec>,
+			      <0 0x220c2600 0 0xec>,
+			      <0 0x220c2000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp3_phy: phy@220c5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c5a00 0 0x19c>,
+			      <0 0x220c5200 0 0xec>,
+			      <0 0x220c5600 0 0xec>,
+			      <0 0x220c5000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sc8280xp-dispcc1";
+			reg = <0 0x22100000 0 0x20000>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <&mdss1_dp0_phy 0>,
+				 <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>,
+				 <&mdss1_dp1_phy 1>,
+				 <&mdss1_dp2_phy 0>,
+				 <&mdss1_dp2_phy 1>,
+				 <&mdss1_dp3_phy 0>,
+				 <&mdss1_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+
+			status = "disabled";
+		};
+
+		ethernet1: ethernet@23000000 {
+			compatible = "qcom,sc8280xp-ethqos";
+			reg = <0x0 0x23000000 0x0 0x10000>,
+			      <0x0 0x23016000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+
+			clocks = <&gcc GCC_EMAC1_AXI_CLK>,
+				 <&gcc GCC_EMAC1_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC1_PTP_CLK>,
+				 <&gcc GCC_EMAC1_RGMII_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "rgmii";
+
+			interrupts = <GIC_SPI 929 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 919 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			iommus = <&apps_smmu 0x40 0xf>;
+			power-domains = <&gcc EMAC_1_GDSC>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
new file mode 100644
index 000000000..2ed39d402
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/ {
+	model = "Inforce 6560 Single Board Computer";
+	compatible = "inforce,ifc6560", "qcom,sda660";
+	chassis-type = "embedded"; /* SBC */
+
+	aliases {
+		serial0 = &blsp1_uart2;
+		serial1 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volup {
+			label = "Volume Up";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7533_out>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3p3_bck_bst: v3p3-bck-bst-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v3p3_bck_bst";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	v1p2_ldo: v1p2-ldo-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v1p2_ldo";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	v5p0_boost: v5p0-boost-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "v5p0_boost";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/sda660/adsp.mbn";
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	adv7533: hdmi@39 {
+		compatible = "adi,adv7535";
+		reg = <0x39>, <0x66>;
+		reg-names = "main", "edid";
+
+		interrupt-parent = <&pm660l_gpios>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
+		clock-names = "cec";
+		/*
+		 * Limit to 3 lanes to prevent the bridge from changing amount
+		 * of lanes in the fly. MSM DSI host doesn't like that.
+		 */
+		adi,dsi-lanes = <3>;
+		avdd-supply = <&vreg_l13a_1p8>;
+		dvdd-supply = <&vreg_l13a_1p8>;
+		pvdd-supply = <&vreg_l13a_1p8>;
+		a2vdd-supply = <&vreg_l13a_1p8>;
+		v3p3-supply = <&v3p3_bck_bst>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7533_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7533_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&blsp1_dma {
+	/*
+	 * The board will lock up if we toggle the BLSP clock, unless the
+	 * BAM DMA interconnects support is in place.
+	 */
+	/delete-property/ clocks;
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_dma {
+	/*
+	 * The board will lock up if we toggle the BLSP clock, unless the
+	 * BAM DMA interconnects support is in place.
+	 */
+	/delete-property/ clocks;
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_l13a_1p8>;
+		vddxo-supply = <&vreg_l9a_1p8>;
+		vddrf-supply = <&vreg_l6a_1p3>;
+		vddch0-supply = <&vreg_l19a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l1a_1p225>;
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&adv7533_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vcca-supply = <&vreg_l1b_0p925>;
+};
+
+&mmss_smmu {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&qusb2phy1 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <1805000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1368000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1804000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l13a_1p8: l13 {
+			/* This gives power to the LPDDR4: never turn it off! */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <925000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2b_2p95: l2 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-system-load = <800000>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3125000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3624000>;
+			regulator-enable-ramp-delay = <500>;
+			regulator-ramp-delay = <0>;
+		};
+	};
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+
+	cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+	no-sdio;
+	no-mmc;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <8 4>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
new file mode 100644
index 000000000..362be5719
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com>
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola Moto G6";
+	compatible = "motorola,ali", "qcom,sdm450";
+	chassis-type = "handset";
+	qcom,msm-id = <338 0>;
+	qcom,board-id = <0x43 0xc200>;
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "volume_up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0xc0000>;
+			console-size = <0x40000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&pm8953_l10>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <3>;
+	qcom,external-pfet;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <795000>;
+			regulator-max-microvolt = <1081000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <95 5>, <111 1>, <126 1>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <0x08>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
new file mode 100644
index 000000000..9425b2d95
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia 10";
+	compatible = "sony,kirin-row", "qcom,sdm630";
+	chassis-type = "handset";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+			height = <2520>;
+		};
+	};
+};
+
+/* Reserve a bigger chunk of RAM for the higher-res display */
+&cont_splash_mem {
+	reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+};
+
+/* Ganges devices feature a Novatek touchscreen instead. */
+/delete-node/ &touchscreen;
+/delete-node/ &vreg_l18a_1v8;
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 000000000..dd484a9bc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Ultra";
+	compatible = "sony,discovery-row", "qcom,sdm630";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 000000000..2da83cd41
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2";
+	compatible = "sony,pioneer-row", "qcom,sdm630";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 000000000..a679d4ace
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Plus";
+	compatible = "sony,voyager-row", "qcom,sdm630";
+	chassis-type = "handset";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+			height = <2160>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 000000000..87d0293c7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno
+ *                     <angelogioacchino.delregno@somainline.org>
+ */
+
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <318 0>;
+	qcom,board-id = <8 1>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+	/* This part enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			status = "okay";
+		};
+	};
+
+	board_vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	cam_vdig_imx300_219_vreg: cam-vdig-imx300-219-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vdig_imx300_219_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_vdig_default>;
+	};
+
+	cam_vana_front_vreg: cam-vana-front-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_front_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&imx219_vana_default>;
+	};
+
+	cam_vana_rear_vreg: cam-vana-rear-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_vana_rear_vreg";
+		startup-delay-us = <0>;
+		enable-active-high;
+		gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&imx300_vana_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			status = "okay";
+		};
+
+		debug@ffb00000 {
+			reg = <0x00 0xffb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		cont_splash_mem: splash@9d400000 {
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			no-map;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp_pil {
+	firmware-name = "qcom/sdm630/Sony/nile/adsp.mdt";
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	touchscreen: synaptics-rmi4-i2c@70 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 45 0x2008>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active &ts_lcd_id_active>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <220>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* SMB1351 charger */
+};
+
+/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NXP NFC */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+
+	/* MSM serial console */
+};
+
+&blsp2_uart1 {
+	status = "okay";
+
+	/* HCI Bluetooth */
+};
+
+&pm660l_lpg {
+	qcom,power-source = <1>;
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qhee_code {
+	reg = <0x00 0x85800000 0x00 0x3700000>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s1b_1p125: s1 {
+			regulator-min-microvolt = <1125000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/*
+		 * At least on Nile's configuration, S3B/S4B (VDD_CX) and
+		 * S5B (VDD_MX) are managed only through RPM Power Domains.
+		 * Trying to set a voltage on the main supply will create
+		 * havoc and freeze the SoC.
+		 * In any case, reference voltages for these regulators are:
+		 * S3B/S4B: 0.870V
+		 * S5B: 0.915V
+		 */
+
+		/* LDOs */
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <928000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2b_2p95: l2 {
+			/*
+			 * This regulator supports 1.648 - 3.104V on this board
+			 * but we set a max voltage of anything less than 2.7V
+			 * to satisfy a condition in sdhci.c that will disable
+			 * 3.3V SDHCI signaling, which happens to be not really
+			 * supported on the Xperia Nile/Ganges platform.
+			 */
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3b_3p0: l3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <100000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l6b_3p3: l6 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3128000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* L9B (870mV) is currently unused */
+		/* L10B (915mV) is currently unused */
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3624000>;
+			regulator-enable-ramp-delay = <500>;
+			regulator-ramp-delay = <0>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_s6a_0p87: s6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <992000>;
+			regulator-enable-ramp-delay = <150>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1226000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p0: l2 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1008000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <944000>;
+			regulator-max-microvolt = <1008000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l5a_0p848: l5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1368000>;
+			regulator-allow-set-load;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l7a_1p2: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1804000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1784000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* This gives power to the LPDDR4: never turn it off! */
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1944000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		/* L16A (2.70V) is unused */
+
+		vreg_l17a_1p8: l17 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+		};
+
+		vreg_l18a_1v8: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <10>;
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <50000>;
+			regulator-system-load = <10000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-ramp-delay = <0>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <8 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_lcd_id_active: ts-lcd-id-active-state {
+		pins = "gpio56";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	imx300_vana_default: imx300-vana-default-state {
+		pins = "gpio50";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	imx219_vana_default: imx219-vana-default-state {
+		pins = "gpio51";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	cam_vdig_default: cam-vdig-default-state {
+		pins = "gpio52";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 000000000..ec6003212
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,2541 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
+#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interconnect/qcom,sdm660.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,apr.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		mmc1 = &sdhc_1;
+		mmc2 = &sdhc_2;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <200>;
+			};
+
+			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <154>;
+				exit-latency-us = <87>;
+				min-residency-us = <200>;
+			};
+
+			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <262>;
+				exit-latency-us = <301>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <284>;
+				exit-latency-us = <384>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <272>;
+				exit-latency-us = <329>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <332>;
+				exit-latency-us = <368>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <545>;
+				exit-latency-us = <1609>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-131250000 {
+			opp-hz = /bits/ 64 <131250000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-210000000 {
+			opp-hz = /bits/ 64 <210000000>;
+			required-opps = <&rpmpd_opp_svs_plus>;
+		};
+
+		opp-262500000 {
+			opp-hz = /bits/ 64 <262500000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sdm660";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sdm660-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_msa_guard: wlan-msa-guard@85600000 {
+			reg = <0x0 0x85600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa-mem@85700000 {
+			reg = <0x0 0x85700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qhee_code: qhee-code@85800000 {
+			reg = <0x0 0x85800000 0x0 0x600000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@85e00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x85e00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		smem_region: smem-mem@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3300000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8ac00000 {
+			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		adsp_region: adsp@92a00000 {
+			reg = <0x0 0x92a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		mba_region: mba@94800000 {
+			reg = <0x0 0x94800000 0x0 0x200000>;
+			no-map;
+		};
+
+		buffer_mem: tzbuffer@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_region: venus@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@f6000000 {
+			reg = <0x0 0xf6000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom-region@f6800000 {
+			reg = <0x0 0xf6800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		zap_shader_region: gpu@fed00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0xfed00000 0x0 0xa00000>;
+			no-map;
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 10>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apcs_glb 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0x94000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&xo_board>,
+					<&sleep_clk>;
+		};
+
+		rpm_msg_ram: sram@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@780000 {
+			compatible = "qcom,sdm630-qfprom", "qcom,qfprom";
+			reg = <0x00780000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@240 {
+				reg = <0x243 0x1>;
+				bits = <1 3>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@41a0 {
+				reg = <0x41a2 0x1>;
+				bits = <5 7>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00793000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		bimc: interconnect@1008000 {
+			compatible = "qcom,sdm660-bimc";
+			reg = <0x01008000 0x78000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
+		restart@10ac000 {
+			compatible = "qcom,pshold";
+			reg = <0x010ac000 0x4>;
+		};
+
+		cnoc: interconnect@1500000 {
+			compatible = "qcom,sdm660-cnoc";
+			reg = <0x01500000 0x10000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+		};
+
+		snoc: interconnect@1626000 {
+			compatible = "qcom,sdm660-snoc";
+			reg = <0x01626000 0x7090>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+
+			assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			assigned-clock-rates = <1000>;
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "bus";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		a2noc: interconnect@1704000 {
+			compatible = "qcom,sdm660-a2noc";
+			reg = <0x01704000 0xc100>;
+			#interconnect-cells = <1>;
+			clock-names = "bus",
+				      "bus_a",
+				      "ipa",
+				      "ufs_axi",
+				      "aggre2_ufs_axi",
+				      "aggre2_usb3_axi",
+				      "cfg_noc_usb2_axi";
+			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+				 <&rpmcc RPM_SMD_IPA_CLK>,
+				 <&gcc GCC_UFS_AXI_CLK>,
+				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
+		};
+
+		mnoc: interconnect@1745000 {
+			compatible = "qcom,sdm660-mnoc";
+			reg = <0x01745000 0xa010>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a", "iface";
+			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
+				 <&mmcc AHB_CLK_SRC>;
+		};
+
+		tsens: thermal-sensor@10ae000 {
+			compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+			reg = <0x010ae000 0x1000>, /* TM */
+				  <0x010ad000 0x1000>; /* SROT */
+			#qcom,sensors = <12>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01f40000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sdm630-tcsr", "syscon";
+			reg = <0x01f60000 0x20000>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sdm630-pinctrl";
+			reg = <0x03100000 0x400000>,
+				  <0x03500000 0x400000>,
+				  <0x03900000 0x400000>;
+			reg-names = "south", "center", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 114>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_default: blsp2-uart1-active-state {
+				tx-rts-pins {
+					pins = "gpio16", "gpio19";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					/*
+					 * Avoid garbage data while BT module
+					 * is powered off or not driving signal
+					 */
+					pins = "gpio17";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				cts-pins {
+					/* Match the pull of the BT module */
+					pins = "gpio18";
+					function = "blsp_uart5";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+				tx-pins {
+					pins = "gpio16";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rx-cts-rts-pins {
+					pins = "gpio17", "gpio18", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			i2c1_default: i2c1-default-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep-state {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c2_default: i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c3_default: i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c3_sleep: i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c4_default: i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c5_default: i2c5-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c6_default: i2c6-default-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c7_default: i2c7-default-state {
+				pins = "gpio26", "gpio27";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep-state {
+				pins = "gpio26", "gpio27";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c8_default: i2c8-default-state {
+				pins = "gpio30", "gpio31";
+				function = "blsp_i2c8_a";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c8_sleep: i2c8-sleep-state {
+				pins = "gpio30", "gpio31";
+				function = "blsp_i2c8_a";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_default: cci0-default-state {
+				pins = "gpio36","gpio37";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio38","gpio39";
+				function = "cci_i2c";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		adreno_gpu: gpu@5000000 {
+			compatible = "qcom,adreno-508.0", "qcom,adreno";
+
+			reg = <0x05000000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gpucc GPUCC_RBBMTIMER_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_GPU_BIMC_GFX_CLK>,
+				<&gpucc GPUCC_RBCPR_CLK>,
+				<&gpucc GPUCC_GFX3D_CLK>;
+
+			clock-names = "iface",
+				"rbbmtimer",
+				"mem",
+				"mem_iface",
+				"rbcpr",
+				"core";
+
+			power-domains = <&rpmpd SDM660_VDDMX>;
+			iommus = <&kgsl_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
+			interconnect-names = "gfx-mem";
+
+			operating-points-v2 = <&gpu_sdm630_opp_table>;
+
+			status = "disabled";
+
+			gpu_sdm630_opp_table: opp-table {
+				compatible = "operating-points-v2";
+				opp-775000000 {
+					opp-hz = /bits/ 64 <775000000>;
+					opp-level = <RPM_SMD_LEVEL_TURBO>;
+					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0xa2>;
+				};
+				opp-647000000 {
+					opp-hz = /bits/ 64 <647000000>;
+					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+					opp-peak-kBps = <4068000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-588000000 {
+					opp-hz = /bits/ 64 <588000000>;
+					opp-level = <RPM_SMD_LEVEL_NOM>;
+					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+					opp-peak-kBps = <2724000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-370000000 {
+					opp-hz = /bits/ 64 <370000000>;
+					opp-level = <RPM_SMD_LEVEL_SVS>;
+					opp-peak-kBps = <2188000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
+					opp-supported-hw = <0xff>;
+				};
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1200000>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		kgsl_smmu: iommu@5040000 {
+			compatible = "qcom,sdm630-smmu-v2",
+				     "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+
+			/*
+			 * GX GDSC parent is CX. We need to bring up CX for SMMU
+			 * but we need both up for Adreno. On the other hand, we
+			 * need to manage the GX rpmpd domain in the adreno driver.
+			 * Enable CX/GX GDSCs here so that we can manage just the GX
+			 * RPM Power Domain in the Adreno driver.
+			 */
+			power-domains = <&gpucc GPU_GX_GDSC>;
+			clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_GPU_BIMC_GFX_CLK>;
+			clock-names = "iface", "mem", "mem_iface";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		gpucc: clock-controller@5065000 {
+			compatible = "qcom,gpucc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x05065000 0x9038>;
+
+			clocks = <&xo_board>,
+				 <&gcc GCC_GPU_GPLL0_CLK>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+			clock-names = "xo",
+				      "gcc_gpu_gpll0_clk",
+				      "gcc_gpu_gpll0_div_clk";
+			status = "disabled";
+		};
+
+		lpass_smmu: iommu@5100000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		sram@290000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x00290000 0x10000>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0800f000 0x1000>,
+			      <0x08400000 0x1000000>,
+			      <0x09400000 0x1000000>,
+			      <0x0a400000 0x220000>,
+			      <0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		usb3: usb@a8f8800 {
+			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+			reg = <0x0a8f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "bus";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>,
+					  <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+			assigned-clock-rates = <19200000>, <120000000>,
+					       <19200000>;
+
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB_30_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+
+			resets = <&gcc GCC_USB_30_BCR>;
+
+			usb3_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0x0a800000 0xc8d0>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+
+				/*
+				 * SDM630 technically supports USB3 but I
+				 * haven't seen any devices making use of it.
+				 */
+				maximum-speed = "high-speed";
+				phys = <&qusb2phy0>;
+				phy-names = "usb2-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+			};
+		};
+
+		qusb2phy0: phy@c012000 {
+			compatible = "qcom,sdm660-qusb2-phy";
+			reg = <0x0c012000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX0_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			status = "disabled";
+		};
+
+		qusb2phy1: phy@c014000 {
+			compatible = "qcom,sdm660-qusb2-phy";
+			reg = <0x0c014000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@c084000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c084000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			bus-width = <4>;
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+					<&gcc GCC_SDCC2_APPS_CLK>,
+					<&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+
+			interconnects = <&a2noc 3 &a2noc 10>,
+					<&gnoc 0 &cnoc 28>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_state_on>;
+			pinctrl-1 = <&sdc2_state_off>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				 compatible = "operating-points-v2";
+
+				 opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <200000 140000>;
+					opp-avg-kBps = <130718 133320>;
+				 };
+				 opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <250000 160000>;
+					opp-avg-kBps = <196078 150000>;
+				 };
+				 opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				 };
+			};
+		};
+
+		sdhc_1: mmc@c0c4000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c0c4000 0x1000>,
+			      <0x0c0c5000 0x1000>,
+			      <0x0c0c8000 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			interconnects = <&a2noc 2 &a2noc 10>,
+					<&gnoc 0 &cnoc 27>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-peak-kBps = <200000 140000>;
+					opp-avg-kBps = <130718 133320>;
+				};
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-peak-kBps = <250000 160000>;
+					opp-avg-kBps = <196078 150000>;
+				};
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
+		};
+
+		usb2: usb@c2f8800 {
+			compatible = "qcom,sdm660-dwc3", "qcom,dwc3";
+			reg = <0x0c2f8800 0x400>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
+				 <&gcc GCC_USB20_MASTER_CLK>,
+				 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB20_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core",
+				      "mock_utmi", "sleep";
+
+			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB20_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <60000000>;
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq";
+
+			qcom,select-utmi-as-pipe-clk;
+
+			resets = <&gcc GCC_USB_20_BCR>;
+
+			usb2_dwc3: usb@c200000 {
+				compatible = "snps,dwc3";
+				reg = <0x0c200000 0xc8d0>;
+				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+
+				/* This is the HS-only host */
+				maximum-speed = "high-speed";
+				phys = <&qusb2phy1>;
+				phy-names = "usb2-phy";
+				snps,hird-threshold = /bits/ 8 <0>;
+			};
+		};
+
+		mmcc: clock-controller@c8c0000 {
+			compatible = "qcom,mmcc-sdm630";
+			reg = <0x0c8c0000 0x40000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "xo",
+					"sleep_clk",
+					"gpll0",
+					"gpll0_div",
+					"dsi0pll",
+					"dsi0pllbyte",
+					"dsi1pll",
+					"dsi1pllbyte",
+					"dp_link_2x_clk_divsel_five",
+					"dp_vco_divided_clk_src_mux";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+					<&sleep_clk>,
+					<&gcc GCC_MMSS_GPLL0_CLK>,
+					<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+					<&mdss_dsi0_phy 1>,
+					<&mdss_dsi0_phy 0>,
+					<0>,
+					<0>,
+					<0>,
+					<0>;
+		};
+
+		mdss: display-subsystem@c900000 {
+			compatible = "qcom,mdss";
+			reg = <0x0c900000 0x1000>,
+			      <0x0c9b0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+
+			power-domains = <&mmcc MDSS_GDSC>;
+
+			clocks = <&mmcc MDSS_AHB_CLK>,
+				 <&mmcc MDSS_AXI_CLK>,
+				 <&mmcc MDSS_VSYNC_CLK>,
+				 <&mmcc MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync",
+				      "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			mdp: display-controller@c901000 {
+				compatible = "qcom,sdm630-mdp5", "qcom,mdp5";
+				reg = <0x0c901000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
+						  <&mmcc MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <300000000>,
+						       <19200000>;
+				clocks = <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				interconnects = <&mnoc 2 &bimc 5>,
+						<&mnoc 3 &bimc 5>,
+						<&gnoc 0 &mnoc 17>;
+				interconnect-names = "mdp0-mem",
+						     "mdp1-mem",
+						     "rotator-mem";
+				iommus = <&mmss_smmu 0>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-150000000 {
+						opp-hz = /bits/ 64 <150000000>;
+						opp-peak-kBps = <320000 320000 76800>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+					opp-275000000 {
+						opp-hz = /bits/ 64 <275000000>;
+						opp-peak-kBps = <6400000 6400000 160000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						opp-peak-kBps = <6400000 6400000 190000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+					opp-330000000 {
+						opp-hz = /bits/ 64 <330000000>;
+						opp-peak-kBps = <6400000 6400000 240000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+					opp-412500000 {
+						opp-hz = /bits/ 64 <412500000>;
+						opp-peak-kBps = <6400000 6400000 320000>;
+						required-opps = <&rpmpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@c994000 {
+				compatible = "qcom,sdm660-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0x0c994000 0x400>;
+				reg-names = "dsi_ctrl";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SDM660_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+						  <&mmcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&mmcc MDSS_MDP_CLK>,
+					 <&mmcc MDSS_BYTE0_CLK>,
+					 <&mmcc MDSS_BYTE0_INTF_CLK>,
+					 <&mmcc MNOC_AHB_CLK>,
+					 <&mmcc MDSS_AHB_CLK>,
+					 <&mmcc MDSS_AXI_CLK>,
+					 <&mmcc MISC_AHB_CLK>,
+					 <&mmcc MDSS_PCLK0_CLK>,
+					 <&mmcc MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "byte",
+					      "byte_intf",
+					      "mnoc",
+					      "iface",
+					      "bus",
+					      "core_mmss",
+					      "pixel",
+					      "core";
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@c994400 {
+				compatible = "qcom,dsi-phy-14nm-660";
+				reg = <0x0c994400 0x100>,
+				      <0x0c994500 0x300>,
+				      <0x0c994800 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
+				status = "disabled";
+			};
+		};
+
+		blsp1_dma: dma-controller@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart1: serial@c16f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c16f000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+					<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_default>;
+			pinctrl-1 = <&i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1af000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_default>;
+			pinctrl-1 = <&blsp2_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c7: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c8: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp2_dma 10>, <&blsp2_dma 11>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c8_default>;
+			pinctrl-1 = <&i2c8_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sram@146bf000 {
+			compatible = "qcom,sdm630-imem", "syscon", "simple-mfd";
+			reg = <0x146bf000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		camss: camss@ca00020 {
+			compatible = "qcom,sdm660-camss";
+			reg = <0x0ca00020 0x10>,
+			      <0x0ca30000 0x100>,
+			      <0x0ca30400 0x100>,
+			      <0x0ca30800 0x100>,
+			      <0x0ca30c00 0x100>,
+			      <0x0c824000 0x1000>,
+			      <0x0ca00120 0x4>,
+			      <0x0c825000 0x1000>,
+			      <0x0ca00124 0x4>,
+			      <0x0c826000 0x1000>,
+			      <0x0ca00128 0x4>,
+			      <0x0ca31000 0x500>,
+			      <0x0ca10000 0x1000>,
+			      <0x0ca14000 0x1000>;
+			reg-names = "csi_clk_mux",
+				    "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid3",
+				    "csiphy0",
+				    "csiphy0_clk_mux",
+				    "csiphy1",
+				    "csiphy1_clk_mux",
+				    "csiphy2",
+				    "csiphy2_clk_mux",
+				    "ispif",
+				    "vfe0",
+				    "vfe1";
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "ispif",
+					  "vfe0",
+					  "vfe1";
+			clocks = <&mmcc CAMSS_AHB_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID0_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID1_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID2_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID3_CLK>,
+				 <&mmcc CAMSS_CSI0_AHB_CLK>,
+				 <&mmcc CAMSS_CSI0_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID0_CLK>,
+				 <&mmcc CAMSS_CSI0PIX_CLK>,
+				 <&mmcc CAMSS_CSI0RDI_CLK>,
+				 <&mmcc CAMSS_CSI1_AHB_CLK>,
+				 <&mmcc CAMSS_CSI1_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID1_CLK>,
+				 <&mmcc CAMSS_CSI1PIX_CLK>,
+				 <&mmcc CAMSS_CSI1RDI_CLK>,
+				 <&mmcc CAMSS_CSI2_AHB_CLK>,
+				 <&mmcc CAMSS_CSI2_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID2_CLK>,
+				 <&mmcc CAMSS_CSI2PIX_CLK>,
+				 <&mmcc CAMSS_CSI2RDI_CLK>,
+				 <&mmcc CAMSS_CSI3_AHB_CLK>,
+				 <&mmcc CAMSS_CSI3_CLK>,
+				 <&mmcc CAMSS_CPHY_CSID3_CLK>,
+				 <&mmcc CAMSS_CSI3PIX_CLK>,
+				 <&mmcc CAMSS_CSI3RDI_CLK>,
+				 <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+				 <&mmcc CSIPHY_AHB2CRIF_CLK>,
+				 <&mmcc CAMSS_CSI_VFE0_CLK>,
+				 <&mmcc CAMSS_CSI_VFE1_CLK>,
+				 <&mmcc CAMSS_ISPIF_AHB_CLK>,
+				 <&mmcc THROTTLE_CAMSS_AXI_CLK>,
+				 <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_VFE0_AHB_CLK>,
+				 <&mmcc CAMSS_VFE0_CLK>,
+				 <&mmcc CAMSS_VFE0_STREAM_CLK>,
+				 <&mmcc CAMSS_VFE1_AHB_CLK>,
+				 <&mmcc CAMSS_VFE1_CLK>,
+				 <&mmcc CAMSS_VFE1_STREAM_CLK>,
+				 <&mmcc CAMSS_VFE_VBIF_AHB_CLK>,
+				 <&mmcc CAMSS_VFE_VBIF_AXI_CLK>;
+			clock-names = "ahb",
+				      "cphy_csid0",
+				      "cphy_csid1",
+				      "cphy_csid2",
+				      "cphy_csid3",
+				      "csi0_ahb",
+				      "csi0",
+				      "csi0_phy",
+				      "csi0_pix",
+				      "csi0_rdi",
+				      "csi1_ahb",
+				      "csi1",
+				      "csi1_phy",
+				      "csi1_pix",
+				      "csi1_rdi",
+				      "csi2_ahb",
+				      "csi2",
+				      "csi2_phy",
+				      "csi2_pix",
+				      "csi2_rdi",
+				      "csi3_ahb",
+				      "csi3",
+				      "csi3_phy",
+				      "csi3_pix",
+				      "csi3_rdi",
+				      "csiphy0_timer",
+				      "csiphy1_timer",
+				      "csiphy2_timer",
+				      "csiphy_ahb2crif",
+				      "csi_vfe0",
+				      "csi_vfe1",
+				      "ispif_ahb",
+				      "throttle_axi",
+				      "top_ahb",
+				      "vfe0_ahb",
+				      "vfe0",
+				      "vfe0_stream",
+				      "vfe1_ahb",
+				      "vfe1",
+				      "vfe1_stream",
+				      "vfe_ahb",
+				      "vfe_axi";
+			interconnects = <&mnoc 5 &bimc 5>;
+			interconnect-names = "vfe-mem";
+			iommus = <&mmss_smmu 0xc00>,
+				 <&mmss_smmu 0xc01>,
+				 <&mmss_smmu 0xc02>,
+				 <&mmss_smmu 0xc03>;
+			power-domains = <&mmcc CAMSS_VFE0_GDSC>,
+					<&mmcc CAMSS_VFE1_GDSC>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci: cci@ca0c000 {
+			compatible = "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0ca0c000 0x1000>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+
+			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+					  <&mmcc CAMSS_CCI_CLK>;
+			assigned-clock-rates = <80800000>, <37500000>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_AHB_CLK>,
+				 <&mmcc CAMSS_CCI_CLK>,
+				 <&mmcc CAMSS_AHB_CLK>;
+			clock-names = "camss_top_ahb",
+				      "cci_ahb",
+				      "cci",
+				      "camss_ahb";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			power-domains = <&mmcc CAMSS_TOP_GDSC>;
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		venus: video-codec@cc00000 {
+			compatible = "qcom,sdm660-venus";
+			reg = <0x0cc00000 0xff000>;
+			clocks = <&mmcc VIDEO_CORE_CLK>,
+				 <&mmcc VIDEO_AHB_CLK>,
+				 <&mmcc VIDEO_AXI_CLK>,
+				 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+			clock-names = "core", "iface", "bus", "bus_throttle";
+			interconnects = <&gnoc 0 &mnoc 13>,
+					<&mnoc 4 &bimc 5>;
+			interconnect-names = "cpu-cfg", "video-mem";
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&mmss_smmu 0x400>,
+				 <&mmss_smmu 0x401>,
+				 <&mmss_smmu 0x40a>,
+				 <&mmss_smmu 0x407>,
+				 <&mmss_smmu 0x40e>,
+				 <&mmss_smmu 0x40f>,
+				 <&mmss_smmu 0x408>,
+				 <&mmss_smmu 0x409>,
+				 <&mmss_smmu 0x40b>,
+				 <&mmss_smmu 0x40c>,
+				 <&mmss_smmu 0x40d>,
+				 <&mmss_smmu 0x410>,
+				 <&mmss_smmu 0x421>,
+				 <&mmss_smmu 0x428>,
+				 <&mmss_smmu 0x429>,
+				 <&mmss_smmu 0x42b>,
+				 <&mmss_smmu 0x42c>,
+				 <&mmss_smmu 0x42d>,
+				 <&mmss_smmu 0x411>,
+				 <&mmss_smmu 0x431>;
+			memory-region = <&venus_region>;
+			power-domains = <&mmcc VENUS_GDSC>;
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "vcodec0_core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+				clock-names = "vcodec0_core";
+				power-domains = <&mmcc VENUS_CORE0_GDSC>;
+			};
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+
+			clocks = <&mmcc MNOC_AHB_CLK>,
+				 <&mmcc BIMC_SMMU_AHB_CLK>,
+				 <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
+				 <&mmcc BIMC_SMMU_AXI_CLK>;
+			clock-names = "iface-mm", "iface-smmu",
+				      "bus-mm", "bus-smmu";
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		adsp_pil: remoteproc@15700000 {
+			compatible = "qcom,sdm660-adsp-pas";
+			reg = <0x15700000 0x4040>;
+
+			interrupts-extended =
+				<&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+			power-domains = <&rpmpd SDM660_VDDCX>;
+			power-domain-names = "cx";
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			glink-edge {
+				interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+				label = "lpass";
+				mboxes = <&apcs_glb 9>;
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&lpass_smmu 1>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		gnoc: interconnect@17900000 {
+			compatible = "qcom,sdm660-gnoc";
+			reg = <0x17900000 0xe000>;
+			#interconnect-cells = <1>;
+			/*
+			 * This one apparently features no clocks,
+			 * so let's not mess with the driver needlessly
+			 */
+			clock-names = "bus", "bus_a";
+			clocks = <&xo_board>, <&xo_board>;
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,sdm660-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17921000 0x1000>,
+					<0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,	   /* GICD */
+				  <0x17b00000 0x100000>;	  /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <105000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		/*
+		 * According to what downstream DTS says,
+		 * the entire power efficient cluster has
+		 * only a single thermal sensor.
+		 */
+
+		pwr-cluster-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				pwr_cluster_alert0: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				pwr_cluster_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				gpu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08>,
+				 <GIC_PPI 2 0xf08>,
+				 <GIC_PPI 3 0xf08>,
+				 <GIC_PPI 0 0xf08>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
new file mode 100644
index 000000000..301eca9a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include "pmi632.dtsi"
+
+/ {
+	model = "Fairphone 3";
+	compatible = "fairphone,fp3", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <8 0x10000>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	status = "okay";
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "himax,hx83112b";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	nfc@28 {
+		compatible = "nxp,nq310", "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pm8953_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pmi632_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+		pm8953_s5: s5 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&tlmm {
+	/*
+	 * 0-3: unused but protected by TZ
+	 * 135-138: fingerprint reader (SPI)
+	 */
+	gpio-reserved-ranges = <0 4>, <135 4>;
+};
+
+&uart_0 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
new file mode 100644
index 000000000..c82d6e628
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Gabriela David
+ */
+/dts-v1/;
+
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola G7 Power";
+	compatible = "motorola,ocean", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <0x141 0xc100>;
+	qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
+
+	backlight: backlight {
+		compatible = "led-backlight";
+		leds = <&led>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (720 * 1520 * 3)>;
+
+			width = <720>;
+			height = <1520>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
+			no-map;
+		};
+
+		reserved@eefa1800 {
+			reg = <0x00 0xeefa1800 0x00 0x5e800>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0xbf800>;
+			console-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x3f800>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2117";
+		reg = <0x41>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-inverted-x;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3697";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led: led@1 {
+			reg = <1>;
+			default-trigger = "backlight";
+			function = LED_FUNCTION_BACKLIGHT;
+			led-sources = <0 1 2>;
+		};
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l18: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <96 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
new file mode 100644
index 000000000..645b9f6a8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include "msm8953.dtsi"
+
+/ {
+	thermal-zones {
+		/delete-node/cpu1-thermal;
+		/delete-node/cpu2-thermal;
+		/delete-node/cpu3-thermal;
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens0 5>;
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens0 6>;
+		};
+
+		cpu6-thermal {
+			thermal-sensors = <&tsens0 7>;
+		};
+
+		cpu7-thermal {
+			thermal-sensors = <&tsens0 8>;
+		};
+	};
+};
+
+/*
+ * SDM632 uses Kryo 250 instead of Cortex A53
+ * CPU0-3 are efficiency cores, CPU4-7 are performance cores
+ */
+&CPU0 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU5 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU6 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU7 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
new file mode 100644
index 000000000..9702e5f59
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-ganges-kirin.dts"
+#include "sdm636.dtsi"
+
+/ {
+	model = "Sony Xperia 10 Plus";
+	compatible = "sony,mermaid-row", "qcom,sdm636";
+	chassis-type = "handset";
+
+	/* SDM636 v1 */
+	qcom,msm-id = <345 0>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
+};
+
+&sdc2_state_on {
+	clk-pins {
+		drive-strength = <14>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm636.dtsi b/arch/arm64/boot/dts/qcom/sdm636.dtsi
new file mode 100644
index 000000000..ae15d81fa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
+ */
+
+#include "sdm660.dtsi"
+
+/*
+ * According to the downstream DTS,
+ * 636 is basically a 660 except for
+ * different CPU frequencies, Adreno
+ * 509 instead of 512 and lack of
+ * turing IP. These differences will
+ * be addressed when the aforementioned
+ * peripherals will be enabled upstream.
+ */
+
+&adreno_gpu {
+	compatible = "qcom,adreno-509.0", "qcom,adreno";
+	/* Adreno 509 shares the frequency table with 512 */
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
new file mode 100644
index 000000000..3c47410ba
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ * Copyright (c) 2021, Dang Huynh <danct12@riseup.net>
+ */
+
+/dts-v1/;
+
+#include "sdm660.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Xiaomi Redmi Note 7";
+	compatible = "xiaomi,lavender", "qcom,sdm660";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1080 * 2340 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volup {
+			label = "Volume Up";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa0000000 0x0 0x400000>;
+			console-size = <0x20000>;
+			record-size = <0x20000>;
+			ftrace-size = <0x0>;
+			pmsg-size = <0x20000>;
+		};
+
+		framebuffer_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * Until we hook up type-c detection, we
+	 * have to stick with this. But it works.
+	 */
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qusb2phy0 {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm660l-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>;
+		vdd_l2-supply = <&vreg_bob>;
+		vdd_l3_l5_l7_l8-supply = <&vreg_bob>;
+		vdd_l4_l6-supply = <&vreg_bob>;
+		vdd_bob-supply = <&vph_pwr>;
+
+		vreg_s1b_1p125: s1 {
+			regulator-min-microvolt = <1125000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s2b_1p05: s2 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		/* LDOs */
+		vreg_l1b_0p925: l1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <925000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		/* SDHCI 3.3V signal doesn't seem to be supported. */
+		vreg_l2b_2p95: l2 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l3b_3p3: l3 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l4b_2p95: l4 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+
+			regulator-min-microamp = <200>;
+			regulator-max-microamp = <600000>;
+			regulator-system-load = <570000>;
+			regulator-allow-set-load;
+		};
+
+		/*
+		 * Downstream specifies a range of 1721-3600mV,
+		 * but the only assigned consumers are SDHCI2 VMMC
+		 * and Coresight QPDI that both request pinned 2.95V.
+		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
+		 * make the mmc driver happy.
+		 */
+		vreg_l5b_2p95: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+			regulator-system-load = <800000>;
+		};
+
+		vreg_l7b_3p125: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3125000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: l8 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pm660-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+
+		vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>;
+		vdd_l2_l3-supply = <&vreg_s2b_1p05>;
+		vdd_l5-supply = <&vreg_s2b_1p05>;
+		vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>;
+		vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: s4 {
+			regulator-min-microvolt = <1805000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+			regulator-always-on;
+		};
+
+		vreg_s5a_1p35: s5 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: s6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <992000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: l1 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l2a_1p0: l2 {
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1010000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: l3 {
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1010000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: l5 {
+			regulator-min-microvolt = <525000>;
+			regulator-max-microvolt = <950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: l6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1370000>;
+			regulator-allow-set-load;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: l8 {
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-system-load = <325000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l9a_1p8: l9 {
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l10a_1p8: l10 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a_1p8: l11 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: l12 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/* This gives power to the LPDDR4: never turn it off! */
+		vreg_l13a_1p8: l13 {
+			regulator-min-microvolt = <1780000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l14a_1p8: l14 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: l16 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p8: l17 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: l19 {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3400000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&pm660l_wled {
+	status = "okay";
+
+	qcom,switching-freq = <800>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+};
+
+&sdc2_state_on {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&sdc2_state_off {
+	sd-cd-pins {
+		pins = "gpio54";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	supports-cqe;
+
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l5b_2p95>;
+	vqmmc-supply = <&vreg_l2b_2p95>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <8 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
new file mode 100644
index 000000000..f89b27c99
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018, Craig Tatlor.
+ * Copyright (c) 2020, Alexey Minnekhanov <alexey.min@gmail.com>
+ * Copyright (c) 2020, AngeloGioacchino Del Regno <kholk11@gmail.com>
+ * Copyright (c) 2020, Konrad Dybcio <konradybcio@gmail.com>
+ * Copyright (c) 2020, Martin Botka <martin.botka1@gmail.com>
+ */
+
+#include "sdm630.dtsi"
+
+&adreno_gpu {
+	compatible = "qcom,adreno-512.0", "qcom,adreno";
+	operating-points-v2 = <&gpu_sdm660_opp_table>;
+
+	gpu_sdm660_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * 775MHz is only available on the highest speed bin
+		 * Though it cannot be used for now due to interconnect
+		 * framework not supporting multiple frequencies
+		 * at the same opp-level
+
+		opp-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
+			opp-level = <RPM_SMD_LEVEL_TURBO>;
+			opp-peak-kBps = <5412000>;
+			opp-supported-hw = <0xCHECKME>;
+		};
+
+		* These OPPs are correct, but we are lacking support for the
+		* GPU regulator. Hence, disable them for now to prevent the
+		* platform from hanging on high graphics loads.
+
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-level = <RPM_SMD_LEVEL_TURBO>;
+			opp-peak-kBps = <5184000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-647000000 {
+			opp-hz = /bits/ 64 <647000000>;
+			opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+			opp-peak-kBps = <4068000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-588000000 {
+			opp-hz = /bits/ 64 <588000000>;
+			opp-level = <RPM_SMD_LEVEL_NOM>;
+			opp-peak-kBps = <3072000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-465000000 {
+			opp-hz = /bits/ 64 <465000000>;
+			opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+			opp-peak-kBps = <2724000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-370000000 {
+			opp-hz = /bits/ 64 <370000000>;
+			opp-level = <RPM_SMD_LEVEL_SVS>;
+			opp-peak-kBps = <2188000>;
+			opp-supported-hw = <0xff>;
+		};
+		*/
+
+		opp-266000000 {
+			opp-hz = /bits/ 64 <266000000>;
+			opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+			opp-peak-kBps = <1648000>;
+			opp-supported-hw = <0xff>;
+		};
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+			opp-peak-kBps = <1200000>;
+			opp-supported-hw = <0xff>;
+		};
+	};
+};
+
+&CPU0 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU1 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU2 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU3 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <1024>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU4 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU5 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU6 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&CPU7 {
+	compatible = "qcom,kryo260";
+	capacity-dmips-mhz = <640>;
+	/delete-property/ operating-points-v2;
+};
+
+&gcc {
+	compatible = "qcom,gcc-sdm660";
+};
+
+&gpucc {
+	compatible = "qcom,gpucc-sdm660";
+};
+
+&mdp {
+	compatible = "qcom,sdm660-mdp5", "qcom,mdp5";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdp5_intf2_out: endpoint {
+				remote-endpoint = <&mdss_dsi1_in>;
+			};
+		};
+	};
+};
+
+&mdss {
+	mdss_dsi1: dsi@c996000 {
+		compatible = "qcom,sdm660-dsi-ctrl",
+			     "qcom,mdss-dsi-ctrl";
+		reg = <0x0c996000 0x400>;
+		reg-names = "dsi_ctrl";
+
+		/* DSI1 shares the OPP table with DSI0 */
+		operating-points-v2 = <&dsi_opp_table>;
+		power-domains = <&rpmpd SDM660_VDDCX>;
+
+		interrupt-parent = <&mdss>;
+		interrupts = <5>;
+
+		assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
+					<&mmcc PCLK1_CLK_SRC>;
+		assigned-clock-parents = <&mdss_dsi1_phy 0>,
+						<&mdss_dsi1_phy 1>;
+
+		clocks = <&mmcc MDSS_MDP_CLK>,
+				<&mmcc MDSS_BYTE1_CLK>,
+				<&mmcc MDSS_BYTE1_INTF_CLK>,
+				<&mmcc MNOC_AHB_CLK>,
+				<&mmcc MDSS_AHB_CLK>,
+				<&mmcc MDSS_AXI_CLK>,
+				<&mmcc MISC_AHB_CLK>,
+				<&mmcc MDSS_PCLK1_CLK>,
+				<&mmcc MDSS_ESC1_CLK>;
+		clock-names = "mdp_core",
+					"byte",
+					"byte_intf",
+					"mnoc",
+					"iface",
+					"bus",
+					"core_mmss",
+					"pixel",
+					"core";
+
+		phys = <&mdss_dsi1_phy>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mdss_dsi1_in: endpoint {
+					remote-endpoint = <&mdp5_intf2_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				mdss_dsi1_out: endpoint {
+				};
+			};
+		};
+	};
+
+	mdss_dsi1_phy: phy@c996400 {
+		compatible = "qcom,dsi-phy-14nm-660";
+		reg = <0x0c996400 0x100>,
+				<0x0c996500 0x300>,
+				<0x0c996800 0x188>;
+		reg-names = "dsi_phy",
+				"dsi_phy_lane",
+				"dsi_pll";
+
+		#clock-cells = <1>;
+		#phy-cells = <0>;
+
+		clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+		clock-names = "iface", "ref";
+		status = "disabled";
+	};
+};
+
+&mmcc {
+	compatible = "qcom,mmcc-sdm660";
+	clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+			<&sleep_clk>,
+			<&gcc GCC_MMSS_GPLL0_CLK>,
+			<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
+			<&mdss_dsi0_phy 1>,
+			<&mdss_dsi0_phy 0>,
+			<&mdss_dsi1_phy 1>,
+			<&mdss_dsi1_phy 0>,
+			<0>,
+			<0>;
+};
+
+&tlmm {
+	compatible = "qcom,sdm660-pinctrl";
+};
+
+&tsens {
+	#qcom,sensors = <14>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
new file mode 100644
index 000000000..32a7bd59e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -0,0 +1,531 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
+ * xiaomi-lavender device tree, and oneplus-common device tree.
+ *
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include "sdm670.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+
+/ {
+	model = "Google Pixel 3a";
+	compatible = "google,sargo", "qcom,sdm670";
+
+	aliases { };
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
+			width = <1080>;
+			height = <2220>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x9800000>;
+			no-map;
+		};
+
+		venus_mem: venus@94800000 {
+			reg = <0 0x94800000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@94d00000 {
+			reg = <0 0x94d00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@94e00000 {
+			reg = <0 0x94e00000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@95600000 {
+			reg = <0 0x95600000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@95800000 {
+			reg = <0 0x95800000 0 0x2200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@97a00000 {
+			reg = <0 0x97a00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@97a10000 {
+			reg = <0 0x97a10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@97a15000 {
+			reg = <0 0x97a15000 0 0x2000>;
+			no-map;
+		};
+
+		framebuffer-region@9c000000 {
+			reg = <0 0x9c000000 0 0x2400000>;
+			no-map;
+		};
+
+		/* Also includes ramoops regions */
+		debug_info_mem: debug-info@a1800000 {
+			reg = <0 0xa1800000 0 0x411000>;
+			no-map;
+		};
+	};
+
+	/*
+	 * The touchscreen regulator seems to be controlled somehow by a gpio.
+	 * Model it as a fixed regulator and keep it on. Without schematics we
+	 * don't know how this is actually wired up...
+	 */
+	ts_1p8_supply: ts-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_1p8_supply";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3312000>;
+		regulator-max-microvolt = <3312000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * Supply map from xiaomi-lavender specifies this as the supply for
+	 * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
+	 * this as a power domain. Set this as a fixed regulator with the same
+	 * voltage as lavender until display is needed to avoid unneccessarily
+	 * using a deprecated binding (regulator-fixed-domain).
+	 */
+	vreg_s2b_1p05: vreg-s2b-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s2b";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm660-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
+		vdd-l2-l3-supply = <&vreg_s2b_1p05>;
+		vdd-l5-supply = <&vreg_s2b_1p05>;
+		vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
+		vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
+
+		/*
+		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
+		 * by the Core Power Reduction hardened (CPRh) and the
+		 * Operating State Manager (OSM) HW automatically.
+		 */
+
+		vreg_s4a_2p04: smps4 {
+			regulator-min-microvolt = <1808000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-enable-ramp-delay = <200>;
+		};
+
+		vreg_s6a_0p87: smps6 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-enable-ramp-delay = <150>;
+		};
+
+		/* LDOs */
+		vreg_l1a_1p225: ldo1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2a_1p0: ldo2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5a_0p848: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6a_1p3: ldo6 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7a_1p2: ldo7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8a_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+			regulator-always-on;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l11a_1p8: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2696000>;
+			regulator-max-microvolt = <2696000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l17a_1p8: ldo17 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l19a_3p3: ldo19 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm660l-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
+		vdd-l4-l6-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		/* LDOs */
+		vreg_l1b_0p925: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <900000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l2b_2p95: ldo2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l3b_3p0: ldo3 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l4b_2p95: ldo4 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l5b_2p95: ldo5 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l6b_3p3: ldo6 {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l7b_3p125: ldo7 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		vreg_l8b_3p3: ldo8 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-enable-ramp-delay = <250>;
+		};
+
+		/*
+		 * Downstream specifies a fixed voltage of 3.312 V, but the
+		 * PMIC4 BOB ranges don't support that. Widen the range a
+		 * little to avoid adding a new BOB regulator type.
+		 */
+		vreg_bob: bob {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3328000>;
+			regulator-enable-ramp-delay = <500>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_default>;
+
+		vio-supply = <&ts_1p8_supply>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <62>;
+			touchscreen-y-mm = <127>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&pm660l_gpios {
+	vol_up_pin: vol-up-state {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	supports-cqe;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-ddr-1_8v;
+
+	qcom,ddr-config = <0xc3040873>;
+
+	vmmc-supply = <&vreg_l4b_2p95>;
+	vqmmc-supply = <&vreg_l8a_1p8>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	touchscreen_default: ts-default-state {
+		ts-reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+			output-high;
+		};
+
+		ts-irq-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		ts-switch-pins {
+			pins = "gpio135";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-low;
+		};
+	};
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1b_0p925>;
+	vdda-pll-supply = <&vreg_l10a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Only peripheral works for now */
+	dr_mode = "peripheral";
+
+	/* Do not assume that sdm670.dtsi will never support USB 3.0 */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+	maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi
new file mode 100644
index 000000000..730c8351b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi
@@ -0,0 +1,1545 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM670 SoC device tree source, adapted from SDM845 SoC device tree
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases { };
+
+	chosen { };
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				next-level-cache = <&L3_0>;
+				cache-level = <2>;
+				cache-unified;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <610>;
+			dynamic-power-coefficient = <203>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <393>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo360";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <393>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gladiator_noc MASTER_AMPSS_M0 3 &mem_noc SLAVE_EBI_CH0 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <1617>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <2380>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9825>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm670", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu0_opp3: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 22118400>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 23040000>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <400000 4800000>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu6_opp5: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp8: opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp10: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 19046400>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-mem@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl-mem@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: aop-mem@85fc0000 {
+			reg = <0 0x85fc0000 0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x85fe0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera-mem@8ab00000 {
+			reg = <0 0x8ab00000 0 0x500000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8b000000 {
+			reg = <0 0x8b000000 0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: venus@92e00000 {
+			reg = <0 0x92e00000 0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@93300000 {
+			reg = <0 0x93300000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@93400000 {
+			reg = <0 0x93400000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@93c00000 {
+			reg = <0 0x93c00000 0 0x200000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@93e00000 {
+			reg = <0 0x93e00000 0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@95c00000 {
+			reg = <0 0x95c00000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@95c10000 {
+			reg = <0 0x95c10000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@95c15000 {
+			reg = <0 0x95c15000 0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: spss@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom@9e400000 {
+			reg = <0 0x9e400000 0 0x1400000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm670";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qfprom: qfprom@784000 {
+			compatible = "qcom,sdm670-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@1eb {
+				reg = <0x1eb 0x1>;
+				bits = <1 4>;
+			};
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sdm670-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+			      <0 0x007c5000 0 0x1000>,
+			      <0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
+			clock-names = "iface", "core", "xo", "ice", "bus";
+			interconnects = <&aggre1_noc MASTER_EMMC 0 &aggre1_noc SLAVE_A1NOC_SNOC 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_EMMC_CFG 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			iommus = <&apps_smmu 0x140 0xf>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_state_on>;
+			pinctrl-1 = <&sdc1_state_off>;
+			power-domains = <&rpmhpd SDM670_CX>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-20000000 {
+					opp-hz = /bits/ 64 <20000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+					opp-peak-kBps = <80000 80000>;
+					opp-avg-kBps = <52286 80000>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <200000 100000>;
+					opp-avg-kBps = <130718 100000>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+					opp-peak-kBps = <200000 130000>;
+					opp-avg-kBps = <130718 130000>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <4096000 4096000>;
+					opp-avg-kBps = <1338562 1338562>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre1_noc MASTER_BLSP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_BLSP_1 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm670-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x6d6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x6c3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM670_CX>;
+				interconnects = <&aggre2_noc MASTER_BLSP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_BLSP_2 0 &mem_noc SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		mem_noc: interconnect@1380000 {
+			compatible = "qcom,sdm670-mem-noc";
+			reg = <0 0x01380000 0 0x27200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@14e0000 {
+			compatible = "qcom,sdm670-dc-noc";
+			reg = <0 0x014e0000 0 0x400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sdm670-config-noc";
+			reg = <0 0x01500000 0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdm670-system-noc";
+			reg = <0 0x01620000 0 0x18080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sdm670-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sdm670-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f300>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sdm670-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm670-tlmm";
+			reg = <0 0x03400000 0 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio17", "gpio18";
+				function = "qup1";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup2";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup3";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio89", "gpio90";
+				function = "qup4";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio85", "gpio86";
+				function = "qup5";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup6";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio93", "gpio94";
+				function = "qup7";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio65", "gpio66";
+				function = "qup8";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup9";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup10";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio31", "gpio32";
+				function = "qup11";
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio49", "gpio50";
+				function = "qup12";
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio105", "gpio106";
+				function = "qup13";
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio33", "gpio34";
+				function = "qup14";
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio81", "gpio82";
+				function = "qup15";
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sdm670-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sdm670-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&gladiator_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sdm670-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 40>, <41 521 7>, <49 529 4>,
+					  <54 534 24>, <79 559 15>, <94 609 15>,
+					  <115 630 7>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gladiator_noc: interconnect@17900000 {
+			compatible = "qcom,sdm670-gladiator-noc";
+			reg = <0 0x17900000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		apps_rsc: rsc@179c0000 {
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x179c0000 0 0x10000>,
+			      <0 0x179d0000 0 0x10000>,
+			      <0 0x179e0000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			label = "apps_rsc";
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm670-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdm670-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <3>;
+		};
+
+		osm_l3: interconnect@17d41000 {
+			compatible = "qcom,sdm670-osm-l3", "qcom,osm-l3";
+			reg = <0 0x17d41000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@17d43000 {
+			compatible = "qcom,cpufreq-hw";
+			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
new file mode 100644
index 000000000..bd7c25bb8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev1)";
+	compatible = "google,cheza-rev1", "qcom,sdm845";
+
+	/*
+	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+	 */
+
+	/*
+	 * NOTE: Technically pp3500_a is not the exact same signal as
+	 * pp3500_a_vbob (there's a load switch between them and the EC can
+	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+	 * view they are the same.
+	 */
+	pp3500_a:
+	pp3500_a_vbob: pp3500-a-vbob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob";
+
+		/*
+		 * Comes on automatically when pp5000_ldo comes on, which
+		 * comes on automatically when ppvar_sys comes on
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		/* Yes, it's really 3.5 despite the name of the signal */
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&pp3500_a>;
+	};
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+	/delete-property/regulator-boot-on;
+	/delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+	regulator-min-microvolt = <3500000>;
+	regulator-max-microvolt = <3500000>;
+	vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID1",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID3",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID2",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID1",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID2",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
new file mode 100644
index 000000000..2b7230594
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev2)";
+	compatible = "google,cheza-rev2", "qcom,sdm845";
+
+	/*
+	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+	 */
+
+	/*
+	 * NOTE: Technically pp3500_a is not the exact same signal as
+	 * pp3500_a_vbob (there's a load switch between them and the EC can
+	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+	 * view they are the same.
+	 */
+	pp3500_a:
+	pp3500_a_vbob: pp3500-a-vbob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob";
+
+		/*
+		 * Comes on automatically when pp5000_ldo comes on, which
+		 * comes on automatically when ppvar_sys comes on
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		/* Yes, it's really 3.5 despite the name of the signal */
+		regulator-min-microvolt = <3500000>;
+		regulator-max-microvolt = <3500000>;
+
+		vin-supply = <&pp3500_a>;
+	};
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+	/delete-property/regulator-boot-on;
+	/delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+	regulator-min-microvolt = <3008000>;
+	regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+	regulator-min-microvolt = <3500000>;
+	regulator-max-microvolt = <3500000>;
+	vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "BRIJ_SUSPEND",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "FPMCU_BOOT0",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL_OD",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID1",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID3",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID2",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID1",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID2",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  "",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID1",
+			  "AP_RAM_ID2",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
new file mode 100644
index 000000000..1ba67be08
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+	model = "Google Cheza (rev3+)";
+	compatible = "google,cheza", "qcom,sdm845";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+	gpio-line-names = "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "BRIJ_SUSPEND",
+			  "FP_RST_L",
+			  "FCAM_EN",
+			  "",
+			  "EDP_BRIJ_IRQ",
+			  "EC_IN_RW_ODL",
+			  "",
+			  "RCAM_MCLK",
+			  "FCAM_MCLK",
+			  "",
+			  "RCAM_EN",
+			  "CCI0_SDA",
+			  "CCI0_SCL",
+			  "CCI1_SDA",
+			  "CCI1_SCL",
+			  "FCAM_RST_L",
+			  "FPMCU_BOOT0",
+			  "PEN_RST_L",
+			  "PEN_IRQ_L",
+			  "FPMCU_SEL_OD",
+			  "RCAM_VSYNC",
+			  "ESIM_MISO",
+			  "ESIM_MOSI",
+			  "ESIM_CLK",
+			  "ESIM_CS_L",
+			  "AP_PEN_1V8_SDA",
+			  "AP_PEN_1V8_SCL",
+			  "AP_TS_I2C_SDA",
+			  "AP_TS_I2C_SCL",
+			  "RCAM_RST_L",
+			  "",
+			  "AP_EDP_BKLTEN",
+			  "AP_BRD_ID0",
+			  "BOOT_CONFIG_4",
+			  "AMP_IRQ_L",
+			  "EDP_BRIJ_I2C_SDA",
+			  "EDP_BRIJ_I2C_SCL",
+			  "EN_PP3300_DX_EDP",
+			  "SD_CD_ODL",
+			  "BT_UART_RTS",
+			  "BT_UART_CTS",
+			  "BT_UART_RXD",
+			  "BT_UART_TXD",
+			  "AMP_I2C_SDA",
+			  "AMP_I2C_SCL",
+			  "AP_BRD_ID2",
+			  "",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "FORCED_USB_BOOT",
+			  "AMP_BCLK",
+			  "AMP_LRCLK",
+			  "AMP_DOUT",
+			  "AMP_DIN",
+			  "AP_BRD_ID1",
+			  "PEN_PDCT_L",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_LRCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "BT_SLIMBUS_DATA",
+			  "BT_SLIMBUS_CLK",
+			  "AMP_RESET_L",
+			  "",
+			  "FCAM_VSYNC",
+			  "",
+			  "AP_SKU_ID0",
+			  "EC_WOV_BCLK",
+			  "EC_WOV_LRCLK",
+			  "EC_WOV_DOUT",
+			  "",
+			  "",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "AP_SPI_CS0_L",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "",
+			  "",
+			  "AP_SPI_CLK",
+			  "",
+			  "RFFE6_CLK",
+			  "RFFE6_DATA",
+			  "BOOT_CONFIG_1",
+			  "BOOT_CONFIG_2",
+			  "BOOT_CONFIG_0",
+			  "EDP_BRIJ_EN",
+			  "",
+			  "USB_HS_TX_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "AP_SKU_ID1",
+			  "SDM_GRFC_8",
+			  "SDM_GRFC_9",
+			  "AP_RST_REQ",
+			  "HP_IRQ",
+			  "TS_RESET_L",
+			  "PEN_EJECT_ODL",
+			  "HUB_RST_L",
+			  "FP_TO_AP_IRQ",
+			  "AP_EC_INT_L",
+			  "",
+			  "",
+			  "TS_INT_L",
+			  "AP_SUSPEND_L",
+			  "SDM_GRFC_3",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
+			   * call it BIOS_FLASH_WP_R_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "H1_AP_INT_ODL",
+			  "QLINK_REQ",
+			  "QLINK_EN",
+			  "SDM_GRFC_2",
+			  "BOOT_CONFIG_3",
+			  "WMSS_RESET_L",
+			  "SDM_GRFC_0",
+			  "SDM_GRFC_1",
+			  "RFFE3_DATA",
+			  "RFFE3_CLK",
+			  "RFFE4_DATA",
+			  "RFFE4_CLK",
+			  "RFFE5_DATA",
+			  "RFFE5_CLK",
+			  "GNSS_EN",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "AP_RAM_ID0",
+			  "AP_RAM_ID1",
+			  "RFFE1_DATA",
+			  "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
new file mode 100644
index 000000000..0ab5e8f53
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -0,0 +1,1333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza device tree source (common between revisions)
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial1 = &uart6;
+		serial0 = &uart9;
+		wifi0 = &wifi;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&cros_ec_pwm 0>;
+		enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		power-supply = <&ppvar_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_edp_bklten>;
+	};
+
+	/* FIXED REGULATORS - parents above children */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on_l; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_a: pp5000-a-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_a";
+
+		/* EC turns on with en_pp5000_a; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	src_vreg_bob: src-vreg-bob-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vreg_bob";
+
+		/* EC turns on with vbob_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_dx_edp: pp3300-dx-edp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_dx_edp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	src_pp1800_s4a: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "src_pp1800_s4a";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&src_vph_pwr>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject_odl>;
+
+		switch-pen-insert {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,p120zdg-bf1";
+		power-supply = <&pp3300_dx_edp>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		panel_in: port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+};
+
+&cpufreq_hw {
+	/delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
+};
+
+&psci {
+	/delete-node/ power-domain-cpu0;
+	/delete-node/ power-domain-cpu1;
+	/delete-node/ power-domain-cpu2;
+	/delete-node/ power-domain-cpu3;
+	/delete-node/ power-domain-cpu4;
+	/delete-node/ power-domain-cpu5;
+	/delete-node/ power-domain-cpu6;
+	/delete-node/ power-domain-cpu7;
+	/delete-node/ power-domain-cluster;
+};
+
+&cpus {
+	/delete-node/ domain-idle-states;
+};
+
+&cpu_idle_states {
+	LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "little-power-down";
+		arm,psci-suspend-param = <0x40000003>;
+		entry-latency-us = <350>;
+		exit-latency-us = <461>;
+		min-residency-us = <1890>;
+		local-timer-stop;
+	};
+
+	LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+		compatible = "arm,idle-state";
+		idle-state-name = "little-rail-power-down";
+		arm,psci-suspend-param = <0x40000004>;
+		entry-latency-us = <360>;
+		exit-latency-us = <531>;
+		min-residency-us = <3934>;
+		local-timer-stop;
+	};
+
+	BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "big-power-down";
+		arm,psci-suspend-param = <0x40000003>;
+		entry-latency-us = <264>;
+		exit-latency-us = <621>;
+		min-residency-us = <952>;
+		local-timer-stop;
+	};
+
+	BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+		compatible = "arm,idle-state";
+		idle-state-name = "big-rail-power-down";
+		arm,psci-suspend-param = <0x40000004>;
+		entry-latency-us = <702>;
+		exit-latency-us = <1061>;
+		min-residency-us = <4488>;
+		local-timer-stop;
+	};
+
+	CLUSTER_SLEEP_0: cluster-sleep-0 {
+		compatible = "arm,idle-state";
+		idle-state-name = "cluster-power-down";
+		arm,psci-suspend-param = <0x400000F4>;
+		entry-latency-us = <3263>;
+		exit-latency-us = <6562>;
+		min-residency-us = <9987>;
+		local-timer-stop;
+	};
+};
+
+&CPU0 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU1 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU2 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU3 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+			   &LITTLE_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU4 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU5 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU6 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&CPU7 {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	cpu-idle-states = <&BIG_CPU_SLEEP_0
+			   &BIG_CPU_SLEEP_1
+			   &CLUSTER_SLEEP_0>;
+};
+
+&lmh_cluster0 {
+	status = "disabled";
+};
+
+&lmh_cluster1 {
+	status = "disabled";
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Putting this all together (out of order with the rest of the file) to keep
+ * all modifications to the memory map (from sdm845.dtsi) in one place.
+ */
+
+/*
+ * Our mpss_region is 8MB bigger than the default one and that conflicts
+ * with venus_mem and cdsp_mem.
+ *
+ * For venus_mem we'll delete and re-create at a different address.
+ *
+ * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
+ * that also means we need to delete cdsp_pas.
+ */
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &cdsp_pas;
+/delete-node/ &gpu_mem;
+
+/* Increase the size from 120 MB to 128 MB */
+&mpss_region {
+	reg = <0 0x8e000000 0 0x8000000>;
+};
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+	reg = <0 0x88f00000 0 0x800000>;
+};
+
+/ {
+	reserved-memory {
+		venus_mem: memory@96000000 {
+			reg = <0 0x96000000 0 0x500000>;
+			no-map;
+		};
+	};
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
+	pinctrl-1 = <&qspi_sleep>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/*
+		 * In theory chip supports up to 104 MHz and controller up
+		 * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
+		 * that for now.  b:117440651
+		 */
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+
+&apps_rsc {
+	/delete-property/ power-domains;
+
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&src_vph_pwr>;
+		vdd-s2-supply = <&src_vph_pwr>;
+		vdd-s3-supply = <&src_vph_pwr>;
+		vdd-s4-supply = <&src_vph_pwr>;
+		vdd-s5-supply = <&src_vph_pwr>;
+		vdd-s6-supply = <&src_vph_pwr>;
+		vdd-s7-supply = <&src_vph_pwr>;
+		vdd-s8-supply = <&src_vph_pwr>;
+		vdd-s9-supply = <&src_vph_pwr>;
+		vdd-s10-supply = <&src_vph_pwr>;
+		vdd-s11-supply = <&src_vph_pwr>;
+		vdd-s12-supply = <&src_vph_pwr>;
+		vdd-s13-supply = <&src_vph_pwr>;
+		vdd-l1-l27-supply = <&src_pp1025_s7a>;
+		vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
+		vdd-l3-l11-supply = <&src_pp1025_s7a>;
+		vdd-l4-l5-supply = <&src_pp1025_s7a>;
+		vdd-l6-supply = <&src_vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
+		vdd-l9-supply = <&src_pp2040_s5a>;
+		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
+		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
+		vdd-l16-l28-supply = <&src_vreg_bob>;
+		vdd-l18-l22-supply = <&src_vreg_bob>;
+		vdd-l20-l24-supply = <&src_vreg_bob>;
+		vdd-l26-supply = <&src_pp1350_s3a>;
+		vin-lvs-1-2-supply = <&src_pp1800_s4a>;
+
+		src_pp1125_s2a: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		src_pp1350_s3a: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		src_pp2040_s5a: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		src_pp1025_s7a: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		src_pp875_l1a: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		src_pp1200_l2a: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+			/* TODO: why??? */
+			regulator-always-on;
+		};
+
+		pp1000_l3a_sdr845: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		src_pp800_l5a: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		src_pp1800_l6a: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_l7a_wcn3990: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1200_l8a: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_dx_pen:
+		src_pp1800_l9a: ldo9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_l10a: ldo10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1000_l11a_sdr845: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		src_pp1800_l12a: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		src_pp2950_l13a: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_l14a: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_l15a: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2700_l16a: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1300_l17a: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2700_l18a: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * NOTE: this rail should have been called
+		 * src_pp3300_l19a in the schematic
+		 */
+		src_pp3000_l19a: ldo19 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp2950_l20a: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp2950_l21a: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_hub:
+		src_pp3300_l22a: ldo22 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			/*
+			 * HACK: Should add a usb hub node and driver
+			 * to turn this on and off at suspend/resume time
+			 */
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		pp3300_l23a_ch1_wcn3990: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		src_pp3075_l24a: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l25a_ch0_wcn3990: ldo25 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1200_hub:
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		src_pp1200_l26a: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_dx_pen:
+		src_pp3300_l28a: ldo28 {
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		src_pp1800_lvs1: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		src_pp1800_lvs2: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&src_vph_pwr>;
+		vdd-s2-supply = <&src_vph_pwr>;
+		vdd-s3-supply = <&src_vph_pwr>;
+		vdd-s4-supply = <&src_vph_pwr>;
+
+		src_pp600_s3c: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+edp_brij_i2c: &i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86_bridge: bridge@2d {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+		vpll-supply = <&src_pp1800_s4a>;
+		vccio-supply = <&src_pp1800_s4a>;
+		vcca-supply = <&src_pp1200_l2a>;
+		vcc-supply = <&src_pp1200_l2a>;
+
+		clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+		clock-names = "refclk";
+
+		no-hpd;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+	};
+};
+
+ap_pen_1v8: &i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+		vdd-supply = <&pp3300_dx_pen>;
+		vddl-supply = <&pp1800_dx_pen>;
+		post-power-on-delay-ms = <100>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+amp_i2c: &i2c12 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+ap_ts_i2c: &i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l &ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc33-supply = <&src_pp3300_l28a>;
+
+		reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
+
+&lpasscc {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+/*
+ * Cheza fw does not properly program the GPU aperture to allow the
+ * GPU to update the SMMU pagetables for context switches.  Work
+ * around this by dropping the "qcom,adreno-smmu" compat string.
+ */
+&adreno_smmu {
+	compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
+};
+
+&mss_pil {
+	status = "okay";
+
+	iommus = <&apps_smmu 0x781 0x0>,
+		 <&apps_smmu 0x724 0x3>;
+};
+
+&pm8998_pwrkey {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+	iommus = <&apps_smmu 0x0 0x3>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+	iommus = <&apps_smmu 0x6c0 0x3>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
+
+	vmmc-supply = <&src_pp2950_l21a>;
+	vqmmc-supply = <&vddpx_2>;
+
+	cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	tpm@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+		spi-max-frequency = <800000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&spi10 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn3990-bt";
+		vddio-supply = <&src_pp1800_s4a>;
+		vddxo-supply = <&pp1800_l7a_wcn3990>;
+		vddrf-supply = <&src_pp1300_l17a>;
+		vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&src_pp2950_l20a>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+
+	/* We'll use this as USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	/*
+	 * The hardware design intends this port to be hooked up in peripheral
+	 * mode, so we'll hardcode it here.  Some details:
+	 * - SDM845 expects only a single Type C connector so it has only one
+	 *   native Type C port but cheza has two Type C connectors.
+	 * - The only source of DP is the single native Type C port.
+	 * - On cheza we want to be able to hook DP up to _either_ of the
+	 *   two Type C connectors and want to be able to achieve 4 lanes of DP.
+	 * - When you configure a Type C port for 4 lanes of DP you lose USB3.
+	 * - In order to make everything work, the native Type C port is always
+	 *   configured as 4-lanes DP so it's always available.
+	 * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
+	 *   sent to the two Type C connectors.
+	 * - The extra USB2 lines from the native Type C port are always
+	 *   setup as "peripheral" so that we can mux them over to one connector
+	 *   or the other if someone needs the connector configured as a gadget
+	 *   (but they only get USB2 speeds).
+	 *
+	 * All the hardware muxes would allow us to hook things up in different
+	 * ways to some potential benefit for static configurations (you could
+	 * achieve extra USB2 bandwidth by using two different ports for the
+	 * two connectors or possibly even get USB3 peripheral mode), but in
+	 * each case you end up forcing to disconnect/reconnect an in-use
+	 * USB session in some cases depending on what you hotplug into the
+	 * other connector.  Thus hardcoding this as peripheral makes sense.
+	 */
+	dr_mode = "peripheral";
+
+	/*
+	 * We always need the high speed pins as 4-lanes DP in case someone
+	 * hotplugs a DP peripheral.  Thus limit this port to a max of high
+	 * speed.
+	 */
+	maximum-speed = "high-speed";
+
+	/*
+	 * We don't need the usb3-phy since we run in highspeed mode always, so
+	 * re-define these properties removing the superspeed USB PHY reference.
+	 */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	/* We have this hooked up to a hub and we always use in host mode */
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
+	vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
+	vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
+	vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qspi_cs0 {
+	bias-disable;		/* External pullup */
+};
+
+&qspi_clk {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data0 {
+	bias-disable;		/* Rely on Cr50 internal pulldown */
+};
+
+&qspi_data1 {
+	bias-pull-down;
+};
+
+&qup_i2c3_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_i2c14_default {
+	drive-strength = <2>;
+
+	/* Has external pullup */
+	bias-disable;
+};
+
+&qup_spi0_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi5_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_spi10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* PINCTRL - board-specific pinctrl */
+&pm8005_gpios {
+	gpio-line-names = "",
+			  "",
+			  "SLB",
+			  "";
+};
+
+&pm8998_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "sdm_temp";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		label = "quiet_temp";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "lte_temp_1";
+	};
+
+	channel@50 {
+		reg = <ADC5_AMUX_THM4_100K_PU>;
+		label = "lte_temp_2";
+	};
+
+	channel@51 {
+		reg = <ADC5_AMUX_THM5_100K_PU>;
+		label = "charger_temp";
+	};
+};
+
+&pm8998_gpios {
+	gpio-line-names = "",
+			  "",
+			  "SW_CTRL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "CFG_OPT1",
+			  "WCSS_PWR_REQ",
+			  "",
+			  "CFG_OPT2",
+			  "SLB";
+};
+
+&tlmm {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&bios_flash_wp_r_l>,
+		    <&ap_suspend_l_deassert>;
+
+	pinctrl-1 = <&bios_flash_wp_r_l>,
+		    <&ap_suspend_l_assert>;
+
+	/*
+	 * Hogs prevent usermode from changing the value. A GPIO can be both
+	 * here and in the pinctrl section.
+	 */
+	ap-suspend-l-hog {
+		gpio-hog;
+		gpios = <126 GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+
+	ap_edp_bklten: ap-edp-bklten-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	bios_flash_wp_r_l: bios-flash-wp-r-l-state {
+		pins = "gpio128";
+		function = "gpio";
+		bias-disable;
+	};
+
+	ec_ap_int_l: ec-ap-int-l-state {
+	       pins = "gpio122";
+	       function = "gpio";
+	       bias-pull-up;
+	};
+
+	edp_brij_en: edp-brij-en-state {
+		pins = "gpio102";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_brij_irq: edp-brij-irq-state {
+		pins = "gpio10";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
+		pins = "gpio43";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl-state {
+		pins = "gpio129";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pen_eject_odl: pen-eject-odl-state {
+		pins = "gpio119";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l-state {
+		pins = "gpio63";
+		function = "gpio";
+
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_rst_l: pen-rst-l-state {
+		pins = "gpio23";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high;
+	};
+
+	qspi_sleep: qspi-sleep-state {
+		pins = "gpio90", "gpio91", "gpio92", "gpio95";
+
+		/*
+		 * When we're not actively transferring we want pins as GPIOs
+		 * with output disabled so that the quad SPI IP block stops
+		 * driving them. We rely on the normal pulls configured in
+		 * the active state and don't redefine them here. Also note
+		 * that we don't need the reverse (output-enable) in the
+		 * normal mode since the "output-enable" only matters for
+		 * GPIO function.
+		 */
+		function = "gpio";
+		output-disable;
+	};
+
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_cd_odl: sd-cd-odl-state {
+		pins = "gpio44";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_int_l: ts-int-l-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l-state {
+		pins = "gpio118";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ap_suspend_l_assert: ap-suspend-l-assert-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
+	ap_suspend_l_deassert: ap-suspend-l-deassert-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-high;
+	};
+};
+
+&venus {
+	status = "okay";
+
+	video-firmware {
+		iommus = <&apps_smmu 0x10b2 0x0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
new file mode 100644
index 000000000..a21caa6f3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "sdm845-db845c.dts"
+
+&camss {
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+
+	status = "okay";
+
+	ports {
+		port@0 {
+			csiphy0_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&ov8856_ep>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c0 {
+	camera@10 {
+		compatible = "ovti,ov8856";
+		reg = <0x10>;
+
+		/* CAM0_RST_N */
+		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		clock-names = "xvclk";
+		clock-frequency = <19200000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace is powered on as a,
+		 * so it is represented by a fixed regulator.
+		 *
+		 * The 2.8V vdda-supply and 1.2V vddd-supply regulators
+		 * both have to be enabled through the power management
+		 * gpios.
+		 */
+		dovdd-supply = <&vreg_lvs1a_1p8>;
+		avdd-supply = <&cam0_avdd_2v8>;
+		dvdd-supply = <&cam0_dvdd_1v2>;
+
+		port {
+			ov8856_ep: endpoint {
+				link-frequencies = /bits/ 64
+					<360000000 180000000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};
+
+&cci_i2c1 {
+	camera@60 {
+		compatible = "ovti,ov7251";
+
+		/* I2C address as per ov7251.txt linux documentation */
+		reg = <0x60>;
+
+		/* CAM3_RST_N */
+		enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam3_default>;
+
+		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+
+		/*
+		 * The &vreg_s4a_1p8 trace always powered on.
+		 *
+		 * The 2.8V vdda-supply regulator is enabled when the
+		 * vreg_s4a_1p8 trace is pulled high.
+		 * It too is represented by a fixed regulator.
+		 *
+		 * No 1.2V vddd-supply regulator is used.
+		 */
+		vdddo-supply = <&vreg_lvs1a_1p8>;
+		vdda-supply = <&cam3_avdd_2v8>;
+
+		status = "disabled";
+
+		port {
+			ov7251_ep: endpoint {
+				data-lanes = <0 1>;
+/*				remote-endpoint = <&csiphy3_ep>; */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
new file mode 100644
index 000000000..7e7bf3fb3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -0,0 +1,1190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Thundercomm Dragonboard 845c";
+	compatible = "thundercomm,db845c", "qcom,sdm845";
+	qcom,msm-id = <341 0x20001>;
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal oscillator dedicated to MCP2517FD */
+	clk40M: can-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	dc12v: dc12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "DC12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "green:user4";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-1 {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	reserved-memory {
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+	};
+
+	lt9611_1v8: lt9611-vdd18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V8";
+
+		vin-supply = <&vdc_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lt9611_3v3: lt9611-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vdc_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	pcie0_1p05v: pcie-0-1p05v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "PCIE0_1.05V";
+
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_DVDD_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		enable-active-high;
+		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	cam0_avdd_2v8: cam0-avdd-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM0_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
+		vin-supply = <&vbat>;
+	};
+
+	/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
+	cam3_avdd_2v8: cam3-avdd-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM3_AVDD_2V8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vbat>;
+	};
+
+	pcie0_3p3v_dual: vldo-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VLDO_3V3";
+
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie0_pwren_state>;
+	};
+
+	v5p0_hdmiout: v5p0-hdmiout-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "V5P0_HDMIOUT";
+
+		vin-supply = <&vdc_5v>;
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+
+		/*
+		 * TODO: make it possible to drive same GPIO from two clients
+		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vbat_som: vbat-som-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT_SOM";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+	};
+
+	vdc_3v3: vdc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_3V3";
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdc_5v: vdc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDC_5V";
+
+		vin-supply = <&dc12v>;
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <500000>;
+		regulator-always-on;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+
+		vin-supply = <&vbat_som>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+
+	firmware-name = "qcom/sdm845/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&camss {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v8>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_b: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c11 {
+	/* On Low speed expansion */
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c14 {
+	/* On Low speed expansion */
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&mdss {
+	memory-region = <&cont_splash_mem>;
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_b>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l1a_0p875>;
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
+&pcie0 {
+	status = "okay";
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+
+	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&pm8998_gpios {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"WLAN_SW_CTRL",
+		"NC",
+		"PM_GPIO5_BLUE_BT_LED",
+		"VOL_UP_N",
+		"NC",
+		"ADC_IN1",
+		"PM_GPIO9_YEL_WIFI_LED",
+		"CAM0_AVDD_EN",
+		"NC",
+		"CAM0_DVDD_EN",
+		"PM_GPIO13_GREEN_U4_LED",
+		"DIV_CLK2",
+		"NC",
+		"NC",
+		"NC",
+		"SMB_STAT",
+		"NC",
+		"NC",
+		"ADC_IN2",
+		"OPTION1",
+		"WCSS_PWR_REQ",
+		"PM845_GPIO24",
+		"OPTION2",
+		"PM845_SLB";
+
+	cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
+		pins = "gpio12";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
+		pins = "gpio10";
+		function = "normal";
+
+		bias-pull-up;
+		drive-push-pull;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+	};
+
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_HEARTBEAT;
+		function-enumerator = <3>;
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@4 {
+		reg = <4>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <2>;
+	};
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_INDICATOR;
+		function-enumerator = <1>;
+	};
+};
+
+/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0 1 2 3>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+		direction = <2>;
+		is-compress-dai;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			 &quat_mi2s_sd0_active
+			 &quat_mi2s_sd1_active
+			 &quat_mi2s_sd2_active
+			 &quat_mi2s_sd3_active>;
+	pinctrl-names = "default";
+	model = "DB845c";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"DMIC0", "MIC BIAS1",
+		"DMIC1", "MIC BIAS1",
+		"DMIC2", "MIC BIAS3",
+		"DMIC3", "MIC BIAS3",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL2",  "MultiMedia2 Playback",
+		"MM_DL4",  "MultiMedia4 Playback",
+		"MultiMedia3 Capture", "MM_UL3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&lt9611_codec 0>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_spi0_default>;
+	cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+
+	can@0 {
+		compatible = "microchip,mcp2517fd";
+		reg = <0>;
+		clocks = <&clk40M>;
+		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <10000000>;
+		vdd-supply = <&vdc_5v>;
+		xceiver-supply = <&vdc_5v>;
+	};
+};
+
+&spi2 {
+	/* On Low speed expansion */
+	status = "okay";
+};
+
+&tlmm {
+	cam0_default: cam0-default-state {
+		rst-pins {
+			pins = "gpio9";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk0-pins {
+			pins = "gpio13";
+			function = "cam_mclk";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	cam3_default: cam3-default-state {
+		rst-pins {
+			function = "gpio";
+			pins = "gpio21";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		mclk3-pins {
+			function = "cam_mclk";
+			pins = "gpio16";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	dsi_sw_sel: dsi-sw-sel-state {
+		pins = "gpio120";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio84";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio36";
+			function = "pci_e0";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio35";
+			function = "gpio";
+
+			drive-strength = <2>;
+			output-low;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio37";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_pwren_state: pcie0-pwren-state {
+		pins = "gpio90";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-n-pins {
+			pins = "gpio102";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		clkreq-pins {
+			pins = "gpio103";
+			function = "pci_e1";
+			bias-pull-up;
+		};
+
+		wake-n-pins {
+			pins = "gpio11";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio75";
+			function = "gpio";
+
+			drive-strength = <16>;
+			bias-pull-up;
+			output-high;
+		};
+	};
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+
+			/*
+			 * It seems that mmc_test reports errors if drive
+			 * strength is not 16 on clk, cmd, and data pins.
+			 */
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart3 {
+	label = "LS-UART0";
+	pinctrl-0 = <&qup_uart3_4pin>;
+
+	status = "disabled";
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,1 {
+			compatible = "sdw10217201000";
+			reg = <0 1>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,2 {
+			compatible = "sdw10217201000";
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			reg = <0 2>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi2_default {
+	drive-strength = <16>;
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi0_default {
+	drive-strength = <6>;
+	bias-disable;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
new file mode 100644
index 000000000..f942c5afe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 / V35 (judyln / judyp) common device tree
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &qseecom_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qseecom_mem: memory@b2000000 {
+			reg = <0 0xb2000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8c415000 {
+			reg = <0 0x8c415000 0 0x2000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x10000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x8900000>;
+			no-map;
+		};
+
+		venus_mem: memory@96d00000 {
+			reg = <0 0x96d00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@97200000 {
+			reg = <0 0x97200000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@97a00000 {
+			reg = <0 0x97a00000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@97c00000 {
+			reg = <0 0x97c00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@99000000 {
+			reg = <0 0x99000000 0 0x100000>;
+			no-map;
+		};
+
+		/* Framebuffer region */
+		memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		/* rmtfs lower guard */
+		memory@f0800000 {
+			reg = <0 0xf0800000 0 0x1000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f0801000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf0801000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		/* rmtfs upper guard */
+		memory@f0a01000 {
+			reg = <0 0xf0a01000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		label = "GPIO Buttons";
+
+		key-vol-up {
+			label = "Volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+};
+
+&dispcc {
+	status = "disabled";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "modem";
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+};
+
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* TODO: these devices have usb id pin */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <81 4>;
+
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 *
+		 * TODO: copy-pasted from mtp, try other values
+		 * on these devices.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
new file mode 100644
index 000000000..a12723310
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 (judyln) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+	model = "LG G7 ThinQ";
+	compatible = "lg,judyln", "qcom,sdm845";
+
+	chosen {
+		framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>;
+			width = <1440>;
+			height = <3120>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+			lab-supply = <&lab>;
+			ibb-supply = <&ibb>;
+		};
+	};
+
+	/* Additional ThinQ key */
+	gpio-keys {
+		pinctrl-0 = <&vol_up_pin_a &thinq_key_default>;
+
+		key-thinq {
+			label = "ThinQ";
+			linux,code = <KEY_ASSISTANT>;
+			interrupt-parent = <&tlmm>;
+			interrupts = <89 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/judyln/adsp.mbn";
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/judyln/cdsp.mbn";
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn";
+};
+
+&tlmm {
+	thinq_key_default: thinq-key-default-state {
+		pins = "gpio89";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
new file mode 100644
index 000000000..d17d4d4d5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG V35 (judyp) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+	model = "LG V35 ThinQ";
+	compatible = "lg,judyp", "qcom,sdm845";
+
+	chosen {
+		framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>;
+			width = <1440>;
+			height = <2880>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/judyp/adsp.mbn";
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/judyp/cdsp.mbn";
+};
+
+&gpu {
+	zap-shader {
+		firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
+	};
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
new file mode 100644
index 000000000..151611339
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -0,0 +1,771 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 MTP board device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDM845 MTP";
+	compatible = "qcom,sdm845-mtp", "qcom,sdm845";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	thermal-zones {
+		xo_thermal: xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 1>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		msm_thermal: msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 2>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pa_thermal: pa-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 3>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+
+		quiet_thermal: quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8998_adc_tm 4>;
+
+			trips {
+				trip-point {
+					temperature = <125000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/adsp.mdt";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/cdsp.mdt";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_0>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "truly,nt35597-2K-display";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				truly_in_0: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				truly_in_1: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&mdss_dsi1 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi1_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_1>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi1_pll>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
+};
+
+&pm8998_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		label = "xo_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		label = "msm_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		label = "pa_therm1";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@51 {
+		reg = <ADC5_AMUX_THM5_100K_PU>;
+		label = "quiet_therm";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@83 {
+		reg = <ADC5_VPH_PWR>;
+		label = "vph_pwr";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+
+	channel@85 {
+		reg = <ADC5_VCOIN>;
+		label = "vcoin";
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+	};
+};
+
+&pm8998_adc_tm {
+	status = "okay";
+
+	xo-thermistor@1 {
+		reg = <1>;
+		io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	msm-thermistor@2 {
+		reg = <2>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-thermistor@3 {
+		reg = <3>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-thermistor@4 {
+		reg = <4>;
+		io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	/*
+	 * Though the USB block on SDM845 can support host, there's no vbus
+	 * signal for this port on MTP.  Thus (unless you have a non-compliant
+	 * hub that works without vbus) the only sensible thing is to force
+	 * peripheral mode.
+	 */
+	dr_mode = "peripheral";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
new file mode 100644
index 000000000..122c7128d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &rmtfs_mem;
+
+/ {
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-hall-sensor {
+		compatible = "gpio-keys";
+		label = "Hall effect sensor";
+
+		pinctrl-0 = <&hall_sensor_default>;
+		pinctrl-names = "default";
+
+		event-hall-sensor {
+			gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+			label = "Hall Effect Sensor";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "Volume keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
+
+		key-vol-down {
+			label = "Volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+
+		key-vol-up {
+			label = "Volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		/*
+		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
+		 * it is otherwise possible for an allocation adjacent to the
+		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
+		 */
+		rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
+			no-map;
+			reg = <0 0xf5b00000 0 0x1000>;
+		};
+		/*
+		 * The rmtfs memory region in downstream is 'dynamically allocated'
+		 * but given the same address every time. Hard code it as this address is
+		 * where the modem firmware expects it to be.
+		 */
+		rmtfs_mem: rmtfs-mem@f5b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf5b01000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+		rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
+			no-map;
+			reg = <0 0xf5d01000 0 0x1000>;
+		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			no-map;
+			reg = <0 0x88f00000 0 0x1c00000>;
+		};
+
+		ramoops: ramoops@ac300000 {
+			compatible = "ramoops";
+			reg = <0 0xac300000 0 0x400000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	/*
+	 * The touchscreen regulator seems to be controlled somehow by a gpio.
+	 * Model it as a fixed regulator and keep it on. Without schematics we
+	 * don't know how this is actually wired up...
+	 */
+	ts_1p8_supply: ts-1p8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_1p8_supply";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 88 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdda_mipi_dsi0_pll:
+		vdda_qlink_lv:
+		vdda_ufs1_core:
+		vdda_usb1_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_1p8:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_mipi_dsi0_1p2:
+		vdda_ufs1_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	bq27441_fg: bq27441-battery@55 {
+		compatible = "ti,bq27411";
+		status = "okay";
+		reg = <0x55>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	synaptics-rmi4-i2c@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_default_pins>;
+
+		vdd-supply = <&vreg_l28a_3p0>;
+		vio-supply = <&ts_1p8_supply>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4_f12: rmi4-f12@12 {
+			reg = <0x12>;
+			touchscreen-x-mm = <68>;
+			touchscreen-y-mm = <144>;
+			syna,sensor-type = <1>;
+			syna,rezero-wait-ms = <200>;
+		};
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	/*
+	 * Both devices use different panels but all other properties
+	 * are common. Compatible line is declared in device dts.
+	 */
+	display_panel: panel@0 {
+		status = "disabled";
+
+		reg = <0>;
+
+		vddio-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+/* Modem/wifi */
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
+};
+
+&pm8998_gpios {
+	volume_down_gpio: pm8998-gpio5-state {
+		pinconf {
+			pins = "gpio5";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+
+	volume_up_gpio: pm8998-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+};
+
+&pmi8998_charger {
+	status = "okay";
+};
+
+&q6afedai {
+	qi2s@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	qi2s@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm845/oneplus6/slpi.mbn";
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	speaker_playback_dai: speaker-dai-link {
+		link-name = "Speaker Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>; /* AIF2_PB */
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 3>; /* AIF2_CAP */
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 5>; /* AIF3_CAP */
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/*
+		 * This path is relative to the qca/
+		 * subdir under lib/firmware.
+		 */
+		firmware-name = "oneplus6/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	label = "LS-UART1";
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+
+	/*
+	 * disable USB3 clock requirement as the device only supports
+	 * USB2.
+	 */
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	/*
+	 * We don't have the capability to switch modes yet.
+	 */
+	dr_mode = "peripheral";
+
+	/* fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Remove USB3 phy as it's unused on this device. */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	hall_sensor_default: hall-sensor-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tri_state_key_default: tri-state-key-default-state {
+		pins = "gpio40", "gpio42", "gpio26";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_default_pins: ts-int-state {
+		pins = "gpio99", "gpio125";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	panel_reset_pins: panel-reset-state {
+		pins = "gpio6", "gpio25", "gpio26";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	panel_te_pin: panel-te-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	panel_esd_pin: panel-esd-state {
+		pins = "gpio30";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	speaker_default: speaker-default-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+		output-high;
+	};
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
+};
+
+&wcd9340 {
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
+
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
new file mode 100644
index 000000000..4005e04d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6 (enchilada) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 6";
+	compatible = "oneplus,enchilada", "qcom,sdm845";
+	chassis-type = "handset";
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <8 0 17819 22>;
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3300000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+};
+
+&display_panel {
+	status = "okay";
+
+	compatible = "samsung,sofef00";
+};
+
+&bq27441_fg {
+	monitored-battery = <&battery>;
+};
+
+&i2c4 {
+	status = "okay";
+
+	max98927_codec: max98927@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+		#sound-dai-cells = <0>;
+
+		pinctrl-0 = <&speaker_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <0>;
+	};
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+};
+
+&sound {
+	model = "OnePlus 6";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"AMIC3", "MIC BIAS4",
+			"AMIC4", "MIC BIAS1",
+			"AMIC5", "MIC BIAS4";
+};
+
+&speaker_playback_dai {
+	codec {
+		sound-dai = <&max98927_codec>;
+	};
+};
+
+&wcd9340 {
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
new file mode 100644
index 000000000..9471ada0d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 OnePlus 6T (fajita) device tree.
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845-oneplus-common.dtsi"
+
+/ {
+	model = "OnePlus 6T";
+	compatible = "oneplus,fajita", "qcom,sdm845";
+	chassis-type = "handset";
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <8 0 18801 41>;
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3700000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+};
+
+&display_panel {
+	status = "okay";
+
+	compatible = "samsung,s6e3fc2x01";
+};
+
+&i2c4 {
+	/* nxp,tfa9894 @ 0x34 */
+};
+
+&bq27441_fg {
+	monitored-battery = <&battery>;
+};
+
+&sound {
+	model = "OnePlus 6T";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC1", "MIC BIAS3",
+			"AMIC2", "MIC BIAS2",
+			"AMIC3", "MIC BIAS4",
+			"AMIC4", "MIC BIAS1",
+			"AMIC5", "MIC BIAS3";
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+};
+
+/*
+ * The TFA9894 codec is currently unsupported.
+ * We need to delete the node to allow the soundcard
+ * to probe for headphones/earpiece.
+ */
+/delete-node/ &speaker_playback_dai;
+
+&rmi4_f12 {
+	touchscreen-y-mm = <148>;
+};
+
+&wcd9340 {
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
new file mode 100644
index 000000000..d37a43313
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/ {
+	chassis-type = "handset";
+	model = "Samsung Galaxy S9 SM-G9600";
+	compatible = "samsung,starqltechn", "qcom,sdm845";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		framebuffer: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
+			width = <1440>;
+			height = <2960>;
+			stride = <(1440 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x02400000>;
+			no-map;
+		};
+
+		memory@a1300000 {
+			compatible = "ramoops";
+			reg = <0x0 0xa1300000 0x0 0x100000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+		};
+	};
+};
+
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vddpx_2>;
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	/* Until we have Type C hooked up we'll force this as peripheral. */
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
+
+	sdc2_clk_state: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 */
+		drive-strength = <16>;
+	};
+
+	sdc2_cmd_state: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sdc2_data_state: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
+	};
+
+	sd_card_det_n_state: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
new file mode 100644
index 000000000..fbb865565
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
+ * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "SHIFT SHIFT6mq";
+	compatible = "shift,axolotl", "qcom,sdm845";
+	qcom,msm-id = <321 0x20001>;
+	qcom,board-id = <11 0>;
+
+	aliases {
+		display0 = &framebuffer0;
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		/* Use framebuffer setup by the bootloader. */
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			width = <1080>;
+			height = <2160>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		key-vol-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		framebuffer_region@9d400000 {
+			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			no-map;
+		};
+
+		ramoops: ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0 0xb0000000 0 0x00400000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			ecc-size = <0x0>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3850000>;
+		voltage-min-design-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,fts8719";
+		reg = <0x38>;
+		wakeup-source;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&vreg_l28a_3p0>;
+		vcc-i2c-supply = <&vreg_l14a_1p88>;
+
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+
+		reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		focaltech,max-touch-number = <5>;
+	};
+};
+
+&i2c10 {
+	/* SMB1355@0x0C */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	panel@0 {
+		compatible = "visionox,rm69299-shift";
+		status = "okay";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+		vdd3p3-supply = <&vreg_l28a_3p0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
+};
+
+&pm8998_gpios {
+	volume_up_gpio: pm8998-gpio6-state {
+		pinconf {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
+&pmi8998_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <1>;
+		led-max-microamp = <100000>;
+		flash-max-microamp = <1100000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <2>;
+		led-max-microamp = <100000>;
+		flash-max-microamp = <1100000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&qup_uart9_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart9_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&slpi_pas {
+	firmware-name = "qcom/sdm845/axolotl/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6", "gpio11";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio6", "gpio11";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_suspend: ts-int-suspend-state {
+		pins = "gpio125";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_reset_active: ts-reset-active-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_reset_suspend: ts-reset-suspend-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/*
+		 * This path is relative to the qca/
+		 * subdir under lib/firmware.
+		 */
+		firmware-name = "axolotl/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/venus.mbn";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
new file mode 100644
index 000000000..d97b7f1e7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ2";
+	compatible = "sony,akari-row", "qcom,sdm845";
+};
+
+&panel {
+	compatible = "sony,td4353-jdi-tama";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
new file mode 100644
index 000000000..5d2052a0f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/* XZ3 uses an Atmel touchscreen instead. */
+/delete-node/ &touchscreen;
+
+/ {
+	model = "Sony Xperia XZ3";
+	compatible = "sony,akatsuki-row", "qcom,sdm845";
+
+	/* Fixed DCDC for the OLED panel */
+	ts_vddio_supply: ts-vddio-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ts_vddio";
+
+		regulator-min-microvolt = <1840000>;
+		regulator-max-microvolt = <1840000>;
+
+		gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&ibb {
+	status = "disabled";
+};
+
+&lab {
+	status = "disabled";
+};
+
+&panel {
+	/* Akatsuki uses an OLED panel. */
+	/delete-property/ backlight;
+	/delete-property/ vsp-supply;
+	/delete-property/ vsn-supply;
+	/delete-property/ touch-reset-gpios;
+};
+
+&pmi8998_wled {
+	status = "disabled";
+};
+
+&tlmm {
+	ts_vddio_en: ts-vddio-en-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&vreg_l14a_1p8 {
+	regulator-min-microvolt = <1840000>;
+	regulator-max-microvolt = <1840000>;
+};
+
+&vreg_l22a_2p8 {
+	/* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
+	regulator-min-microvolt = <2696000>;
+	regulator-max-microvolt = <2696000>;
+};
+
+&vreg_l28a_2p8 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
new file mode 100644
index 000000000..cd056f780
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sdm845-sony-xperia-tama.dtsi"
+
+/ {
+	model = "Sony Xperia XZ2 Compact";
+	compatible = "sony,apollo-row", "qcom,sdm845";
+};
+
+&panel {
+	compatible = "sony,td4353-jdi-tama";
+	height-mm = <112>;
+	width-mm = <56>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
new file mode 100644
index 000000000..7ee61b204
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -0,0 +1,706 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+	qcom,board-id = <8 0>;
+
+	aliases {
+		serial0 = &uart6;
+		serial1 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		/* SONY was cool and didn't diverge from MTP this time, yay! */
+		cont_splash_mem: memory@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x2400000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_0p9>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
+		vdd-l3-l11-supply = <&vreg_s7a_0p9>;
+		vdd-l4-l5-supply = <&vreg_s7a_0p9>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l9-supply = <&vreg_s5a_1p9>;
+		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
+		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
+		vdd-l16-l28-supply = <&src_vreg_bob>;
+		vdd-l18-l22-supply = <&src_vreg_bob>;
+		vdd-l20-l24-supply = <&src_vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p3>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p1: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p3: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_0p9: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vreg_l1a_0p9: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p7: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p7: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_1p8: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-system-load = <62000>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_2p7: ldo19 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+			/*
+			 * The driver *really* doesn't want this regualtor to exist,
+			 * saying that it could not get the current voltage (-ENOTRECOVERABLE)
+			 * even though it surely is used on these devices (as a voltage
+			 * source for camera autofocus)
+			 */
+			status = "disabled";
+		};
+
+		vreg_l20a_2p7: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p7: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p8: ldo22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p0: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p1: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p0: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_2p8: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-system-load = <100000>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		src_vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			<GCC_QSPI_CORE_CLK_SRC>,
+			<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			<GCC_LPASS_Q6_AXI_CLK>,
+			<GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen: touchscreen@2c {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x2c>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&vreg_l14a_1p8>;
+		/*
+		 * This is a blatant abuse of OF, but the panel driver *needs*
+		 * to probe first, as the power/gpio switching needs to be precisely
+		 * timed in order for both the display and touch panel to function properly.
+		 */
+		incell-supply = <&panel>;
+
+		syna,reset-delay-ms = <220>;
+		syna,startup-delay-ms = <1000>;
+
+		pinctrl-0 = <&ts_default>;
+		pinctrl-1 = <&ts_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Qcom SMB1355 @ 8, c */
+	/* NXP PN547 NFC @ 28 */
+	/* Renesas IDTP9221 Qi charger @ 61 */
+};
+
+&i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SONY ToF sensor @ 52 */
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&ibb {
+	qcom,discharge-resistor-kohms = <300>;
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5700000>;
+	regulator-min-microamp = <0>;
+	regulator-max-microamp = <800000>;
+	regulator-over-current-protection;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&lab {
+	regulator-min-microvolt = <5500000>;
+	regulator-max-microvolt = <5700000>;
+	regulator-min-microamp = <200000>;
+	regulator-max-microamp = <200000>;
+	regulator-over-current-protection;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* The compatible is assigned in device DTs. */
+		reg = <0>;
+
+		backlight = <&pmi8998_wled>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vsp-supply = <&lab>;
+		vsn-supply = <&ibb>;
+		panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+		pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1a_0p9>;
+	status = "okay";
+};
+
+&pm8998_gpios {
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmi8998_wled {
+	default-brightness = <800>;
+	qcom,switching-freq = <800>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-boost-limit = <970>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,enabled-strings = <0 1 2 3>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&vreg_l21a_2p7>;
+	vqmmc-supply = <&vreg_l13a_1p8>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sdc2_default_state>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_sleep: sde-dsi-sleep-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active_sleep: sde-te-active-sleep-state {
+		pins = "gpio10";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_default: ts-default-state {
+		reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		int-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	ts_sleep: ts-sleep-state {
+		reset-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		int-pins {
+			pins = "gpio125";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+
+	qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+
+	maximum-speed = "high-speed";
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
+};
+
+&venus {
+	firmware-name = "qcom/sdm845/Sony/tama/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
new file mode 100644
index 000000000..c15d48860
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+&slim {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		wcd9340_ifd: ifd@0,0 {
+			compatible = "slim217,250";
+			reg = <0 0>;
+		};
+
+		wcd9340: codec@1,0 {
+			compatible = "slim217,250";
+			reg = <1 0>;
+			slim-ifc-dev = <&wcd9340_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clock-names = "extclk";
+			clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+
+			pinctrl-0 = <&wcd_intr_default>;
+			pinctrl-names = "default";
+
+			qcom,micbias1-microvolt = <1800000>;
+			qcom,micbias2-microvolt = <1800000>;
+			qcom,micbias3-microvolt = <1800000>;
+			qcom,micbias4-microvolt = <1800000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wcdgpio: gpio-controller@42 {
+				compatible = "qcom,wcd9340-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x42 0x2>;
+			};
+
+			swm: swm@c85 {
+				compatible = "qcom,soundwire-v1.3.0";
+				reg = <0xc85 0x40>;
+				interrupts-extended = <&wcd9340 20>;
+
+				qcom,dout-ports = <6>;
+				qcom,din-ports = <2>;
+				qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
+				qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
+				qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
+
+				#sound-dai-cells = <1>;
+				clocks = <&wcd9340>;
+				clock-names = "iface";
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	wcd_intr_default: wcd-intr-default-state {
+		pins = "gpio54";
+		function = "gpio";
+
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
new file mode 100644
index 000000000..9d6faeb65
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &tz_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &rmtfs_mem;
+
+/ {
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <69 0>;
+	qcom,msm-id = <321 0x20001>;
+
+	aliases {
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_pin_a>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* Reserved memory changes from downstream */
+	reserved-memory {
+		tz_mem: memory@86200000 {
+			reg = <0 0x86200000 0 0x4900000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: memory@95c00000 {
+			reg = <0 0x95c00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@96100000 {
+			reg = <0 0x96100000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@96900000 {
+			reg = <0 0x96900000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@96b00000 {
+			reg = <0 0x96b00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@97f00000 {
+			reg = <0 0x97f00000 0 0x100000>;
+			no-map;
+		};
+
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 0x2400000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f6301000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6301000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <4000000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn";
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&lab {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		vddpos-supply = <&lab>;
+		vddneg-supply = <&ibb>;
+
+		backlight = <&pmi8998_wled>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		status = "disabled";
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+	status = "okay";
+};
+
+&pm8998_gpios {
+	vol_up_pin_a: vol-up-active-state {
+		pins = "gpio6";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+	};
+};
+
+&pmi8998_lpg {
+	status = "okay";
+
+	led@5 {
+		reg = <5>;
+		color = <LED_COLOR_ID_WHITE>;
+		function = LED_FUNCTION_STATUS;
+	};
+};
+
+&pmi8998_wled {
+	status = "okay";
+	qcom,current-boost-limit = <970>;
+	qcom,ovp-millivolt = <29600>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+	qcom,switching-freq = <600>;
+	qcom,external-pfet;
+	qcom,cabc;
+};
+
+&pmi8998_charger {
+	monitored-battery = <&battery>;
+
+	status = "okay";
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+/* QUAT I2S Uses 1 I2S SD Line for audio on TAS2559/60 amplifiers */
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+	vmmc-supply = <&vreg_l21a_2p95>;
+	vqmmc-supply = <&vreg_l13a_2p95>;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+};
+
+&sound {
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active
+			&quat_mi2s_sd0_active>;
+	pinctrl-names = "default";
+	model = "Xiaomi Poco F1";
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			bias-pull-up;
+			drive-strength = <10>;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/beryllium/venus.mbn";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
new file mode 100644
index 000000000..76931ebad
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-ebbg.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (EBBG)";
+	compatible = "xiaomi,beryllium-ebbg", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "ebbg,ft8719";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
new file mode 100644
index 000000000..e9427851e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-tianma.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "sdm845-xiaomi-beryllium-common.dtsi"
+
+/ {
+	model = "Xiaomi Pocophone F1 (Tianma)";
+	compatible = "xiaomi,beryllium", "qcom,sdm845";
+};
+
+&display_panel {
+	compatible = "tianma,fhd-video", "novatek,nt36672a";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
new file mode 100644
index 000000000..6db12abaa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net>
+ * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
+
+/*
+ * Delete following upstream (sdm845.dtsi) reserved
+ * memory mappings which are different in this device.
+ */
+/delete-node/ &rmtfs_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &mba_region;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+
+/ {
+	model = "Xiaomi Mi MIX 2S";
+	compatible = "xiaomi,polaris", "qcom,sdm845";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x141 0x20001>;
+	qcom,board-id = <0x2a 0x0>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		adsp_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1e00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8e300000 {
+			reg = <0 0x8e300000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e400000 {
+			reg = <0 0x8e400000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: memory@95c00000 {
+			reg = <0 0x95c00000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@96100000 {
+			reg = <0 0x96100000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: memory@96900000 {
+			reg = <0 0x96900000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: memory@96b00000 {
+			reg = <0 0x96b00000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: memory@97f00000 {
+			reg = <0 0x97f00000 0 0x100000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f6301000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf6301000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3400000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vreg_tp_vddio: vreg-tp-vddio {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_tp_vddio";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vreg_s4a_1p8: vreg-s4a-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s2a_1p1: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdda_mipi_dsi0_pll:
+		vdda_ufs1_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p05: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l18a_2p9: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p1: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_3p3: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vdda_mipi_dsi0_1p2:
+		vdda_ufs1_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_smp3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm845/polaris/cdsp.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+				<GCC_QSPI_CORE_CLK_SRC>,
+				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				<GCC_LPASS_Q6_AXI_CLK>,
+				<GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/polaris/a630_zap.mbn";
+	};
+};
+
+&ibb {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-over-current-protection;
+	regulator-pull-down;
+	regulator-soft-start;
+	qcom,discharge-resistor-kohms = <300>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/polaris/ipa_fws.mbn";
+	status = "okay";
+};
+
+&i2c14 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts-extended = <&tlmm 125 0x2008>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ts_int_default &ts_reset_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+
+		vdd-supply = <&vreg_l28a_3p0>;
+		vio-supply = <&vreg_tp_vddio>;
+
+		syna,startup-delay-ms = <0xc8>;
+		syna,reset-delay-ms = <0xc8>;
+
+		rmi4-f01@1 {
+			syna,nosleep-mode = <0x1>;
+			reg = <0x1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,rezero-wait-ms = <0xc8>;
+			syna,clip-x-high = <0x438>;
+			syna,clip-y-high = <0x870>;
+			syna,sensor-type = <0x1>;
+			syna,clip-x-low = <0x0>;
+			syna,clip-y-low = <0x0>;
+		};
+	};
+};
+
+&lab {
+	regulator-min-microvolt = <4600000>;
+	regulator-max-microvolt = <6000000>;
+	regulator-soft-start;
+	regulator-pull-down;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+	status = "okay";
+
+	display_panel: panel@0 {
+		compatible = "jdi,fhd-nt35596s";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		vddio-supply = <&vreg_l14a_1p8>;
+		backlight = <&pmi8998_wled>;
+		vddpos-supply = <&lab>;
+		vddneg-supply = <&ibb>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active>;
+		pinctrl-1 = <&sde_dsi_suspend>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+	status = "okay";
+};
+
+&mss_pil {
+	firmware-name = "qcom/sdm845/polaris/mba.mbn", "qcom/sdm845/polaris/modem.mbn";
+	status = "okay";
+};
+
+&pmi8998_wled {
+	qcom,current-limit-microamp = <20000>;
+	qcom,current-boost-limit = <970>;
+	qcom,ovp-millivolt = <19600>;
+	qcom,switching-freq = <600>;
+	qcom,num-strings = <4>;
+	qcom,cabc;
+
+	status = "okay";
+};
+
+&pm8998_gpios {
+	volume_up_gpio: pm8998-gpio6-state {
+		pinconf {
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			function = "normal";
+			pins = "gpio6";
+			input-enable;
+			bias-pull-up;
+		};
+	};
+};
+
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&q6afedai {
+	dai@22 {
+		reg = <QUATERNARY_MI2S_RX>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qup_i2c14_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio99";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <16>;
+	};
+
+	ts_reset_sleep: ts-reset-sleep-state {
+		pins = "gpio99";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio125";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio6", "gpio10";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio6", "gpio10";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_uart6_4pin>;
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		/* This path is relative to the qca/ subdir under lib/firmware. */
+		firmware-name = "polaris/crnv21.bin";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1 {
+	/* We'll use this as USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+
+	/* Fastest mode for USB 2 */
+	maximum-speed = "high-speed";
+
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdd-supply = <&vreg_l1a_0p875>;
+
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,imp-res-offset-value = <8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sdm845/polaris/venus.mbn";
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <1800000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
new file mode 100644
index 000000000..63f651569
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -0,0 +1,5782 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+#include <dt-bindings/clock/qcom,lpass-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sdm845.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
+#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+		};
+	};
+
+	cpus: cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_100>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_200>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <611>;
+			dynamic-power-coefficient = <154>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			next-level-cache = <&L2_300>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_400>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_500>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_600>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo385";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <442>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_700>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		cpu_idle_states: idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <350>;
+				exit-latency-us = <461>;
+				min-residency-us = <1890>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <264>;
+				exit-latency-us = <621>;
+				min-residency-us = <952>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm845", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <800000 7680000>;
+		};
+
+		cpu0_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <1804000 10444800>;
+		};
+
+		cpu0_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp12: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <2188000 15052800>;
+		};
+
+		cpu0_opp13: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 16588800>;
+		};
+
+		cpu0_opp14: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <3072000 18124800>;
+		};
+
+		cpu0_opp15: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 19353600>;
+		};
+
+		cpu0_opp16: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 19353600>;
+		};
+
+		cpu0_opp17: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <4068000 20889600>;
+		};
+
+		cpu0_opp18: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 9216000>;
+		};
+
+		cpu4_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <3072000 11980800>;
+		};
+
+		cpu4_opp12: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp13: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp14: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp15: opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp16: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp17: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp18: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <5412000 19353600>;
+		};
+
+		cpu4_opp19: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp20: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp21: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <7216000 19353600>;
+		};
+
+		cpu4_opp22: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp23: opp-2092800000 {
+			opp-hz = /bits/ 64 <2092800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp24: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp25: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp26: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp27: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp28: opp-2476800000 {
+			opp-hz = /bits/ 64 <2476800000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp29: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp30: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp31: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+
+		cpu4_opp32: opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+	};
+
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-328580000 {
+			opp-hz = /bits/ 64 <328580000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci: psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-mem@85700000 {
+			reg = <0 0x85700000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: xbl-mem@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		aop_mem: aop-mem@85fc0000 {
+			reg = <0 0x85fc0000 0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85fe0000 0 0x20000>;
+			no-map;
+		};
+
+		smem@86000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86000000 0 0x200000>;
+			no-map;
+			hwlocks = <&tcsr_mutex 3>;
+		};
+
+		tz_mem: tz@86200000 {
+			reg = <0 0x86200000 0 0x2d00000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@88f00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0x88f00000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		qseecom_mem: qseecom@8ab00000 {
+			reg = <0 0x8ab00000 0 0x1400000>;
+			no-map;
+		};
+
+		camera_mem: camera-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x500000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8c400000 {
+			reg = <0 0x8c400000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8c410000 {
+			reg = <0 0x8c410000 0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: gpu@8c415000 {
+			reg = <0 0x8c415000 0 0x2000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8c500000 {
+			reg = <0 0x8c500000 0 0x1a00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa@8df00000 {
+			reg = <0 0x8df00000 0 0x100000>;
+			no-map;
+		};
+
+		mpss_region: mpss@8e000000 {
+			reg = <0 0x8e000000 0 0x7800000>;
+			no-map;
+		};
+
+		venus_mem: venus@95800000 {
+			reg = <0 0x95800000 0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@95d00000 {
+			reg = <0 0x95d00000 0 0x800000>;
+			no-map;
+		};
+
+		mba_region: mba@96500000 {
+			reg = <0 0x96500000 0 0x200000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@96700000 {
+			reg = <0 0x96700000 0 0x1400000>;
+			no-map;
+		};
+
+		spss_mem: spss@97b00000 {
+			reg = <0 0x97b00000 0 0x100000>;
+			no-map;
+		};
+
+		mdata_mem: mpss-metadata {
+			alloc-ranges = <0 0xa0000000 0 0x20000000>;
+			size = <0 0x4000>;
+			no-map;
+		};
+
+		fastrpc_mem: fastrpc {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
+			alignment = <0x0 0x400000>;
+			size = <0x0 0x1000000>;
+			reusable;
+		};
+	};
+
+	adsp_pas: remoteproc-adsp {
+		compatible = "qcom,sdm845-adsp-pas";
+
+		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		memory-region = <&adsp_mem>;
+
+		qcom,qmp = <&aoss_qmp>;
+
+		qcom,smem-states = <&adsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		status = "disabled";
+
+		glink-edge {
+			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+			label = "lpass";
+			qcom,remote-pid = <2>;
+			mboxes = <&apss_shared 8>;
+
+			apr {
+				compatible = "qcom,apr-v2";
+				qcom,glink-channels = "apr_audio_svc";
+				qcom,domain = <APR_DOMAIN_ADSP>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				qcom,intents = <512 20>;
+
+				service@3 {
+					reg = <APR_SVC_ADSP_CORE>;
+					compatible = "qcom,q6core";
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+				};
+
+				q6afe: service@4 {
+					compatible = "qcom,q6afe";
+					reg = <APR_SVC_AFE>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6afedai: dais {
+						compatible = "qcom,q6afe-dais";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#sound-dai-cells = <1>;
+					};
+				};
+
+				q6asm: service@7 {
+					compatible = "qcom,q6asm";
+					reg = <APR_SVC_ASM>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6asmdai: dais {
+						compatible = "qcom,q6asm-dais";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#sound-dai-cells = <1>;
+						iommus = <&apps_smmu 0x1821 0x0>;
+					};
+				};
+
+				q6adm: service@8 {
+					compatible = "qcom,q6adm";
+					reg = <APR_SVC_ADM>;
+					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					q6routing: routing {
+						compatible = "qcom,q6adm-routing";
+						#sound-dai-cells = <0>;
+					};
+				};
+			};
+
+			fastrpc {
+				compatible = "qcom,fastrpc";
+				qcom,glink-channels = "fastrpcglink-apps-dsp";
+				label = "adsp";
+				qcom,non-secure-domain;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				compute-cb@3 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <3>;
+					iommus = <&apps_smmu 0x1823 0x0>;
+				};
+
+				compute-cb@4 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <4>;
+					iommus = <&apps_smmu 0x1824 0x0>;
+				};
+			};
+		};
+	};
+
+	cdsp_pas: remoteproc-cdsp {
+		compatible = "qcom,sdm845-cdsp-pas";
+
+		interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "wdog", "fatal", "ready",
+				  "handover", "stop-ack";
+
+		clocks = <&rpmhcc RPMH_CXO_CLK>;
+		clock-names = "xo";
+
+		memory-region = <&cdsp_mem>;
+
+		qcom,qmp = <&aoss_qmp>;
+
+		qcom,smem-states = <&cdsp_smp2p_out 0>;
+		qcom,smem-state-names = "stop";
+
+		status = "disabled";
+
+		glink-edge {
+			interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+			label = "turing";
+			qcom,remote-pid = <5>;
+			mboxes = <&apss_shared 4>;
+			fastrpc {
+				compatible = "qcom,fastrpc";
+				qcom,glink-channels = "fastrpcglink-apps-dsp";
+				label = "cdsp";
+				qcom,non-secure-domain;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				compute-cb@1 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <1>;
+					iommus = <&apps_smmu 0x1401 0x30>;
+				};
+
+				compute-cb@2 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <2>;
+					iommus = <&apps_smmu 0x1402 0x30>;
+				};
+
+				compute-cb@3 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <3>;
+					iommus = <&apps_smmu 0x1403 0x30>;
+				};
+
+				compute-cb@4 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <4>;
+					iommus = <&apps_smmu 0x1404 0x30>;
+				};
+
+				compute-cb@5 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <5>;
+					iommus = <&apps_smmu 0x1405 0x30>;
+				};
+
+				compute-cb@6 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <6>;
+					iommus = <&apps_smmu 0x1406 0x30>;
+				};
+
+				compute-cb@7 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <7>;
+					iommus = <&apps_smmu 0x1407 0x30>;
+				};
+
+				compute-cb@8 {
+					compatible = "qcom,fastrpc-compute-cb";
+					reg = <8>;
+					iommus = <&apps_smmu 0x1408 0x30>;
+				};
+			};
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 14>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&apss_shared 26>;
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm845";
+			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>,
+				 <&pcie0_lane>,
+				 <&pcie1_lane>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			power-domains = <&rpmhpd SDM845_CX>;
+		};
+
+		qfprom@784000 {
+			compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2p_hstx_trim: hstx-trim-primary@1eb {
+				reg = <0x1eb 0x1>;
+				bits = <1 4>;
+			};
+
+			qusb2s_hstx_trim: hstx-trim-secondary@1eb {
+				reg = <0x1eb 0x2>;
+				bits = <6 4>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x00793000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x0016 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart0: serial@880000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart2: serial@888000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart3: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart4: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart5: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart6: serial@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart7: serial@89c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x06d6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x6c3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
+			interconnect-names = "qup-core";
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart8: serial@a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart10: serial@a88000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart11: serial@a8c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart13: serial@a94000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart14: serial@a98000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart15: serial@a9c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
+						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		llcc: system-cache-controller@1100000 {
+			compatible = "qcom,sdm845-llcc";
+			reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
+			      <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+			      <0 0x01300000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma@10a2000 {
+			compatible = "qcom,sdm845-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ae000 0x0 0x2000>;
+		};
+
+		pmu@114a000 {
+			compatible = "qcom,sdm845-llcc-bwmon";
+			reg = <0 0x0114a000 0 0x1000>;
+			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * The interconnect path bandwidth taken from
+				 * cpu4_opp_table bandwidth for gladiator_noc-mem_noc
+				 * interconnect.  This also matches the
+				 * bandwidth table of qcom,llccbw (qcom,bw-tbl,
+				 * bus width: 4 bytes) from msm-4.9 downstream
+				 * kernel.
+				 */
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <1804000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <3072000>;
+				};
+				opp-3 {
+					opp-peak-kBps = <5412000>;
+				};
+				opp-4 {
+					opp-peak-kBps = <7216000>;
+				};
+			};
+		};
+
+		pmu@1436400 {
+			compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x01436400 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * The interconnect path bandwidth taken from
+				 * cpu4_opp_table bandwidth for OSM L3
+				 * interconnect.  This also matches the OSM L3
+				 * from bandwidth table of qcom,cpu4-l3lat-mon
+				 * (qcom,core-dev-table, bus width: 16 bytes)
+				 * from msm-4.9 downstream kernel.
+				 */
+				opp-0 {
+					opp-peak-kBps = <4800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <9216000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <15052800>;
+				};
+				opp-3 {
+					opp-peak-kBps = <20889600>;
+				};
+				opp-4 {
+					opp-peak-kBps = <25497600>;
+				};
+			};
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sdm845";
+			reg = <0 0x01c00000 0 0x2000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c07000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			iommu-map = <0x0   &apps_smmu 0x1c10 0x1>,
+				    <0x100 &apps_smmu 0x1c11 0x1>,
+				    <0x200 &apps_smmu 0x1c12 0x1>,
+				    <0x300 &apps_smmu 0x1c13 0x1>,
+				    <0x400 &apps_smmu 0x1c14 0x1>,
+				    <0x500 &apps_smmu 0x1c15 0x1>,
+				    <0x600 &apps_smmu 0x1c16 0x1>,
+				    <0x700 &apps_smmu 0x1c17 0x1>,
+				    <0x800 &apps_smmu 0x1c18 0x1>,
+				    <0x900 &apps_smmu 0x1c19 0x1>,
+				    <0xa00 &apps_smmu 0x1c1a 0x1>,
+				    <0xb00 &apps_smmu 0x1c1b 0x1>,
+				    <0xc00 &apps_smmu 0x1c1c 0x1>,
+				    <0xd00 &apps_smmu 0x1c1d 0x1>,
+				    <0xe00 &apps_smmu 0x1c1e 0x1>,
+				    <0xf00 &apps_smmu 0x1c1f 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sdm845-qmp-pcie-phy";
+			reg = <0 0x01c06000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06200 0 0x128>,
+				      <0 0x01c06400 0 0x1fc>,
+				      <0 0x01c06800 0 0x218>,
+				      <0 0x01c06600 0 0x70>;
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sdm845";
+			reg = <0 0x01c08000 0 0x2000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40100000 0 0x100000>,
+			      <0 0x01c0c000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>,
+				    <0x200 &apps_smmu 0x1c02 0x1>,
+				    <0x300 &apps_smmu 0x1c03 0x1>,
+				    <0x400 &apps_smmu 0x1c04 0x1>,
+				    <0x500 &apps_smmu 0x1c05 0x1>,
+				    <0x600 &apps_smmu 0x1c06 0x1>,
+				    <0x700 &apps_smmu 0x1c07 0x1>,
+				    <0x800 &apps_smmu 0x1c08 0x1>,
+				    <0x900 &apps_smmu 0x1c09 0x1>,
+				    <0xa00 &apps_smmu 0x1c0a 0x1>,
+				    <0xb00 &apps_smmu 0x1c0b 0x1>,
+				    <0xc00 &apps_smmu 0x1c0c 0x1>,
+				    <0xd00 &apps_smmu 0x1c0d 0x1>,
+				    <0xe00 &apps_smmu 0x1c0e 0x1>,
+				    <0xf00 &apps_smmu 0x1c0f 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0a000 {
+			compatible = "qcom,sdm845-qhp-pcie-phy";
+			reg = <0 0x01c0a000 0 0x800>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c06200 {
+				reg = <0 0x01c0a800 0 0x800>,
+				      <0 0x01c0a800 0 0x800>,
+				      <0 0x01c0b800 0 0x400>;
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		mem_noc: interconnect@1380000 {
+			compatible = "qcom,sdm845-mem-noc";
+			reg = <0 0x01380000 0 0x27200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@14e0000 {
+			compatible = "qcom,sdm845-dc-noc";
+			reg = <0 0x014e0000 0 0x400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sdm845-config-noc";
+			reg = <0 0x01500000 0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdm845-system-noc";
+			reg = <0 0x01620000 0 0x18080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sdm845-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sdm845-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f300>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sdm845-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			iommus = <&apps_smmu 0x100 0xf>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sdm845-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x108>,
+				      <0 0x01d87600 0 0x1e0>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x108>,
+				      <0 0x01d87a00 0 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmhcc RPMH_CE_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x704 0x1>,
+				 <&apps_smmu 0x706 0x1>,
+				 <&apps_smmu 0x714 0x1>,
+				 <&apps_smmu 0x716 0x1>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,crypto-v5.4";
+			reg = <0 0x01dfa000 0 0x6000>;
+			clocks = <&gcc GCC_CE1_AHB_CLK>,
+				 <&gcc GCC_CE1_AXI_CLK>,
+				 <&rpmhcc RPMH_CE_CLK>;
+			clock-names = "iface", "bus", "core";
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x704 0x1>,
+				 <&apps_smmu 0x706 0x1>,
+				 <&apps_smmu 0x714 0x1>,
+				 <&apps_smmu 0x716 0x1>;
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sdm845-ipa";
+
+			iommus = <&apps_smmu 0x720 0x0>,
+				 <&apps_smmu 0x722 0x0>;
+			reg = <0 0x01e40000 0 0x7000>,
+			      <0 0x01e47000 0 0x2000>,
+			      <0 0x01e04000 0 0x2c000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "imem",
+					     "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sdm845-tcsr", "syscon";
+			reg = <0 0x01f60000 0 0x20000>;
+		};
+
+		tlmm: pinctrl@3400000 {
+			compatible = "qcom,sdm845-pinctrl";
+			reg = <0 0x03400000 0 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 151>;
+			wakeup-parent = <&pdc_intc>;
+
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio17", "gpio18";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+
+				bias-pull-up;
+				drive-strength = <2>; /* 2 mA */
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio19", "gpio20";
+				function = "cci_i2c";
+
+				drive-strength = <2>; /* 2 mA */
+				bias-pull-down;
+			};
+
+			qspi_clk: qspi-clk-state {
+				pins = "gpio95";
+				function = "qspi_clk";
+			};
+
+			qspi_cs0: qspi-cs0-state {
+				pins = "gpio90";
+				function = "qspi_cs";
+			};
+
+			qspi_cs1: qspi-cs1-state {
+				pins = "gpio89";
+				function = "qspi_cs";
+			};
+
+			qspi_data0: qspi-data0-state {
+				pins = "gpio91";
+				function = "qspi_data";
+			};
+
+			qspi_data1: qspi-data1-state {
+				pins = "gpio92";
+				function = "qspi_data";
+			};
+
+			qspi_data23: qspi-data23-state {
+				pins = "gpio93", "gpio94";
+				function = "qspi_data";
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio17", "gpio18";
+				function = "qup1";
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup2";
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup3";
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio89", "gpio90";
+				function = "qup4";
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio85", "gpio86";
+				function = "qup5";
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup6";
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio93", "gpio94";
+				function = "qup7";
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio65", "gpio66";
+				function = "qup8";
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup9";
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup10";
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio31", "gpio32";
+				function = "qup11";
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio49", "gpio50";
+				function = "qup12";
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio105", "gpio106";
+				function = "qup13";
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio33", "gpio34";
+				function = "qup14";
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio81", "gpio82";
+				function = "qup15";
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio17", "gpio18", "gpio19", "gpio20";
+				function = "qup1";
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio27", "gpio28", "gpio29", "gpio30";
+				function = "qup2";
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio41", "gpio42", "gpio43", "gpio44";
+				function = "qup3";
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio89", "gpio90", "gpio91", "gpio92";
+				function = "qup4";
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio85", "gpio86", "gpio87", "gpio88";
+				function = "qup5";
+			};
+
+			qup_spi6_default: qup-spi6-default-state {
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				function = "qup6";
+			};
+
+			qup_spi7_default: qup-spi7-default-state {
+				pins = "gpio93", "gpio94", "gpio95", "gpio96";
+				function = "qup7";
+			};
+
+			qup_spi8_default: qup-spi8-default-state {
+				pins = "gpio65", "gpio66", "gpio67", "gpio68";
+				function = "qup8";
+			};
+
+			qup_spi9_default: qup-spi9-default-state {
+				pins = "gpio6", "gpio7", "gpio4", "gpio5";
+				function = "qup9";
+			};
+
+			qup_spi10_default: qup-spi10-default-state {
+				pins = "gpio55", "gpio56", "gpio53", "gpio54";
+				function = "qup10";
+			};
+
+			qup_spi11_default: qup-spi11-default-state {
+				pins = "gpio31", "gpio32", "gpio33", "gpio34";
+				function = "qup11";
+			};
+
+			qup_spi12_default: qup-spi12-default-state {
+				pins = "gpio49", "gpio50", "gpio51", "gpio52";
+				function = "qup12";
+			};
+
+			qup_spi13_default: qup-spi13-default-state {
+				pins = "gpio105", "gpio106", "gpio107", "gpio108";
+				function = "qup13";
+			};
+
+			qup_spi14_default: qup-spi14-default-state {
+				pins = "gpio33", "gpio34", "gpio31", "gpio32";
+				function = "qup14";
+			};
+
+			qup_spi15_default: qup-spi15-default-state {
+				pins = "gpio81", "gpio82", "gpio83", "gpio84";
+				function = "qup15";
+			};
+
+			qup_uart0_default: qup-uart0-default-state {
+				qup_uart0_tx: tx-pins {
+					pins = "gpio2";
+					function = "qup0";
+				};
+
+				qup_uart0_rx: rx-pins {
+					pins = "gpio3";
+					function = "qup0";
+				};
+			};
+
+			qup_uart1_default: qup-uart1-default-state {
+				qup_uart1_tx: tx-pins {
+					pins = "gpio19";
+					function = "qup1";
+				};
+
+				qup_uart1_rx: rx-pins {
+					pins = "gpio20";
+					function = "qup1";
+				};
+			};
+
+			qup_uart2_default: qup-uart2-default-state {
+				qup_uart2_tx: tx-pins {
+					pins = "gpio29";
+					function = "qup2";
+				};
+
+				qup_uart2_rx: rx-pins {
+					pins = "gpio30";
+					function = "qup2";
+				};
+			};
+
+			qup_uart3_default: qup-uart3-default-state {
+				qup_uart3_tx: tx-pins {
+					pins = "gpio43";
+					function = "qup3";
+				};
+
+				qup_uart3_rx: rx-pins {
+					pins = "gpio44";
+					function = "qup3";
+				};
+			};
+
+			qup_uart3_4pin: qup-uart3-4pin-state {
+				qup_uart3_4pin_cts: cts-pins {
+					pins = "gpio41";
+					function = "qup3";
+				};
+
+				qup_uart3_4pin_rts_tx: rts-tx-pins {
+					pins = "gpio42", "gpio43";
+					function = "qup3";
+				};
+
+				qup_uart3_4pin_rx: rx-pins {
+					pins = "gpio44";
+					function = "qup3";
+				};
+			};
+
+			qup_uart4_default: qup-uart4-default-state {
+				qup_uart4_tx: tx-pins {
+					pins = "gpio91";
+					function = "qup4";
+				};
+
+				qup_uart4_rx: rx-pins {
+					pins = "gpio92";
+					function = "qup4";
+				};
+			};
+
+			qup_uart5_default: qup-uart5-default-state {
+				qup_uart5_tx: tx-pins {
+					pins = "gpio87";
+					function = "qup5";
+				};
+
+				qup_uart5_rx: rx-pins {
+					pins = "gpio88";
+					function = "qup5";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				qup_uart6_tx: tx-pins {
+					pins = "gpio47";
+					function = "qup6";
+				};
+
+				qup_uart6_rx: rx-pins {
+					pins = "gpio48";
+					function = "qup6";
+				};
+			};
+
+			qup_uart6_4pin: qup-uart6-4pin-state {
+				qup_uart6_4pin_cts: cts-pins {
+					pins = "gpio45";
+					function = "qup6";
+					bias-pull-down;
+				};
+
+				qup_uart6_4pin_rts_tx: rts-tx-pins {
+					pins = "gpio46", "gpio47";
+					function = "qup6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				qup_uart6_4pin_rx: rx-pins {
+					pins = "gpio48";
+					function = "qup6";
+					bias-pull-up;
+				};
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				qup_uart7_tx: tx-pins {
+					pins = "gpio95";
+					function = "qup7";
+				};
+
+				qup_uart7_rx: rx-pins {
+					pins = "gpio96";
+					function = "qup7";
+				};
+			};
+
+			qup_uart8_default: qup-uart8-default-state {
+				qup_uart8_tx: tx-pins {
+					pins = "gpio67";
+					function = "qup8";
+				};
+
+				qup_uart8_rx: rx-pins {
+					pins = "gpio68";
+					function = "qup8";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				qup_uart9_tx: tx-pins {
+					pins = "gpio4";
+					function = "qup9";
+				};
+
+				qup_uart9_rx: rx-pins {
+					pins = "gpio5";
+					function = "qup9";
+				};
+			};
+
+			qup_uart10_default: qup-uart10-default-state {
+				qup_uart10_tx: tx-pins {
+					pins = "gpio53";
+					function = "qup10";
+				};
+
+				qup_uart10_rx: rx-pins {
+					pins = "gpio54";
+					function = "qup10";
+				};
+			};
+
+			qup_uart11_default: qup-uart11-default-state {
+				qup_uart11_tx: tx-pins {
+					pins = "gpio33";
+					function = "qup11";
+				};
+
+				qup_uart11_rx: rx-pins {
+					pins = "gpio34";
+					function = "qup11";
+				};
+			};
+
+			qup_uart12_default: qup-uart12-default-state {
+				qup_uart12_tx: tx-pins {
+					pins = "gpio51";
+					function = "qup0";
+				};
+
+				qup_uart12_rx: rx-pins {
+					pins = "gpio52";
+					function = "qup0";
+				};
+			};
+
+			qup_uart13_default: qup-uart13-default-state {
+				qup_uart13_tx: tx-pins {
+					pins = "gpio107";
+					function = "qup13";
+				};
+
+				qup_uart13_rx: rx-pins {
+					pins = "gpio108";
+					function = "qup13";
+				};
+			};
+
+			qup_uart14_default: qup-uart14-default-state {
+				qup_uart14_tx: tx-pins {
+					pins = "gpio31";
+					function = "qup14";
+				};
+
+				qup_uart14_rx: rx-pins {
+					pins = "gpio32";
+					function = "qup14";
+				};
+			};
+
+			qup_uart15_default: qup-uart15-default-state {
+				qup_uart15_tx: tx-pins {
+					pins = "gpio83";
+					function = "qup15";
+				};
+
+				qup_uart15_rx: rx-pins {
+					pins = "gpio84";
+					function = "qup15";
+				};
+			};
+
+			quat_mi2s_sleep: quat-mi2s-sleep-state {
+				pins = "gpio58", "gpio59";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_active: quat-mi2s-active-state {
+				pins = "gpio58", "gpio59";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+
+			quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state {
+				pins = "gpio60";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
+				pins = "gpio60";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state {
+				pins = "gpio61";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
+				pins = "gpio61";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state {
+				pins = "gpio62";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
+				pins = "gpio62";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state {
+				pins = "gpio63";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
+				pins = "gpio63";
+				function = "qua_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		mss_pil: remoteproc@4080000 {
+			compatible = "qcom,sdm845-mss-pil";
+			reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended =
+				<&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
+				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&gcc GCC_PRNG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "mem", "gpll0_mss",
+				      "snoc_axi", "mnoc_axi", "prng", "xo";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+			power-domains = <&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>,
+					<&rpmhpd SDM845_MSS>;
+			power-domain-names = "cx", "mx", "mss";
+
+			status = "disabled";
+
+			mba {
+				memory-region = <&mba_region>;
+			};
+
+			mpss {
+				memory-region = <&mpss_region>;
+			};
+
+			metadata {
+				memory-region = <&mdata_mem>;
+			};
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,sdm845-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+		};
+
+		slpi_pas: remoteproc@5c00000 {
+			compatible = "qcom,sdm845-slpi-pas";
+			reg = <0 0x5c00000 0 0x4000>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+						<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+						"handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			power-domains = <&rpmhpd SDM845_CX>,
+					<&rpmhpd SDM845_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
+						      QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
+					memory-region = <&fastrpc_mem>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@0 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <0>;
+					};
+				};
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint =
+						  <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6043000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06043000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@5 {
+					reg = <5>;
+					funnel2_in5: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&funnel0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&funnel2_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06047000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint =
+						  <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					etf_in: endpoint {
+						remote-endpoint =
+						  <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint =
+						  <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint =
+						  <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint =
+						  <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint =
+						  <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint =
+						  <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint =
+						  <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint =
+						  <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint =
+						  <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint =
+						  <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint =
+						  <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint =
+						  <&funnel2_in5>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint =
+						  <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0xa0 0xf>;
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-9600000 {
+					opp-hz = /bits/ 64 <9600000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qspi: spi@88df000 {
+			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+			reg = <0 0x088df000 0 0x600>;
+			iommus = <&apps_smmu 0x160 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
+			status = "disabled";
+		};
+
+		slim: slim-ngd@171c0000 {
+			compatible = "qcom,slim-ngd-v2.1.0";
+			reg = <0 0x171c0000 0 0x2c000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&slimbam 3>, <&slimbam 4>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x1806 0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lmh_cluster1: lmh@17d70800 {
+			compatible = "qcom,sdm845-lmh";
+			reg = <0 0x17d70800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@17d78800 {
+			compatible = "qcom,sdm845-lmh";
+			reg = <0 0x17d78800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <65000>;
+			qcom,lmh-temp-low-millicelsius = <94500>;
+			qcom,lmh-temp-high-millicelsius = <95000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			nvmem-cells = <&qusb2p_hstx_trim>;
+		};
+
+		usb_2_hsphy: phy@88e3000 {
+			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+			nvmem-cells = <&qusb2s_hstx_trim>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x128>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x128>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb_2_qmpphy: phy@88eb000 {
+			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x18c>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88eb200 {
+				reg = <0 0x088eb200 0 0x128>,
+				      <0 0x088eb400 0 0x1fc>,
+				      <0 0x088eb800 0 0x218>,
+				      <0 0x088eb600 0 0x70>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x740 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x760 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sdm845-venus-v2";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&videocc VCODEC1_GDSC>,
+					<&rpmhpd SDM845_CX>;
+			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
+			operating-points-v2 = <&venus_opp_table>;
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus",
+				      "vcodec1_core", "vcodec1_bus";
+			iommus = <&apps_smmu 0x10a0 0x8>,
+				 <&apps_smmu 0x10b0 0x0>;
+			memory-region = <&venus_mem>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
+			interconnect-names = "video-mem", "cpu-cfg";
+
+			status = "disabled";
+
+			video-core0 {
+				compatible = "venus-decoder";
+			};
+
+			video-core1 {
+				compatible = "venus-encoder";
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-533000097 {
+					opp-hz = /bits/ 64 <533000097>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sdm845-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		camss: camss@acb3000 {
+			compatible = "qcom,sdm845-camss";
+
+			reg = <0 0x0acb3000 0 0x1000>,
+				<0 0x0acba000 0 0x1000>,
+				<0 0x0acc8000 0 0x1000>,
+				<0 0x0ac65000 0 0x1000>,
+				<0 0x0ac66000 0 0x1000>,
+				<0 0x0ac67000 0 0x1000>,
+				<0 0x0ac68000 0 0x1000>,
+				<0 0x0acaf000 0 0x4000>,
+				<0 0x0acb6000 0 0x4000>,
+				<0 0x0acc4000 0 0x4000>;
+			reg-names = "csid0",
+				"csid1",
+				"csid2",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"vfe0",
+				"vfe1",
+				"vfe_lite";
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "csid0",
+				"csid1",
+				"csid2",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"vfe0",
+				"vfe1",
+				"vfe_lite";
+
+			power-domains = <&clock_camcc IFE_0_GDSC>,
+				<&clock_camcc IFE_1_GDSC>,
+				<&clock_camcc TITAN_TOP_GDSC>;
+
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY0_CLK>,
+				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY1_CLK>,
+				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY2_CLK>,
+				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+				<&clock_camcc CAM_CC_CSIPHY3_CLK>,
+				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+				<&gcc GCC_CAMERA_AHB_CLK>,
+				<&gcc GCC_CAMERA_AXI_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+				<&clock_camcc CAM_CC_IFE_LITE_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				<&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				"cpas_ahb",
+				"cphy_rx_src",
+				"csi0",
+				"csi0_src",
+				"csi1",
+				"csi1_src",
+				"csi2",
+				"csi2_src",
+				"csiphy0",
+				"csiphy0_timer",
+				"csiphy0_timer_src",
+				"csiphy1",
+				"csiphy1_timer",
+				"csiphy1_timer_src",
+				"csiphy2",
+				"csiphy2_timer",
+				"csiphy2_timer_src",
+				"csiphy3",
+				"csiphy3_timer",
+				"csiphy3_timer_src",
+				"gcc_camera_ahb",
+				"gcc_camera_axi",
+				"slow_ahb_src",
+				"soc_ahb",
+				"vfe0_axi",
+				"vfe0",
+				"vfe0_cphy_rx",
+				"vfe0_src",
+				"vfe1_axi",
+				"vfe1",
+				"vfe1_cphy_rx",
+				"vfe1_src",
+				"vfe_lite",
+				"vfe_lite_cphy_rx",
+				"vfe_lite_src";
+
+			iommus = <&apps_smmu 0x0808 0x0>,
+				 <&apps_smmu 0x0810 0x8>,
+				 <&apps_smmu 0x0c08 0x0>,
+				 <&apps_smmu 0x0c10 0x8>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+			};
+		};
+
+		cci: cci@ac4a000 {
+			compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4a000 0 0x4000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
+				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				"soc_ahb",
+				"slow_ahb_src",
+				"cpas_ahb",
+				"cci",
+				"cci_src";
+
+			assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&clock_camcc CAM_CC_CCI_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		clock_camcc: clock-controller@ad00000 {
+			compatible = "qcom,sdm845-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm845-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+			         <&apps_smmu 0xc80 0x8>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm845-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-344000000 {
+						opp-hz = /bits/ 64 <344000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				status = "disabled";
+				compatible = "qcom,sdm845-dp";
+
+				reg = <0 0x0ae90000 0 0x200>,
+				      <0 0x0ae90200 0 0x200>,
+				      <0 0x0ae90400 0 0x600>,
+				      <0 0x0ae90a00 0 0x600>,
+				      <0 0x0ae91000 0 0x600>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface", "core_aux", "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm845-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm845-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@5000000 {
+			compatible = "qcom,adreno-630.2", "qcom,adreno";
+
+			reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+			/*
+			 * Look ma, no clocks! The GPU clocks and power are
+			 * controlled entirely by the GMU
+			 */
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
+			interconnect-names = "gfx-mem";
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-710000000 {
+					opp-hz = /bits/ 64 <710000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
+				};
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
+				};
+
+				opp-596000000 {
+					opp-hz = /bits/ 64 <596000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <6220000>;
+				};
+
+				opp-520000000 {
+					opp-hz = /bits/ 64 <520000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <6220000>;
+				};
+
+				opp-414000000 {
+					opp-hz = /bits/ 64 <414000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <4068000>;
+				};
+
+				opp-342000000 {
+					opp-hz = /bits/ 64 <342000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <2724000>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@5040000 {
+			compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+			         <&gcc GCC_GPU_CFG_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@506a000 {
+			compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+			reg = <0 0x0506a000 0 0x30000>,
+			      <0 0x0b280000 0 0x10000>,
+			      <0 0x0b480000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+			         <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc_intc: interrupt-controller@b220000 {
+			compatible = "qcom,sdm845-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		pdc_reset: reset-controller@b2e0000 {
+			compatible = "qcom,sdm845-pdc-global";
+			reg = <0 0x0b2e0000 0 0x20000>;
+			#reset-cells = <1>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_reset: reset-controller@c2a0000 {
+			compatible = "qcom,sdm845-aoss-cc";
+			reg = <0 0x0c2a0000 0 0x31000>;
+			#reset-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+
+			cx_cdev: cx {
+				#cooling-cells = <2>;
+			};
+
+			ebi_cdev: ebi {
+				#cooling-cells = <2>;
+			};
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,sdm845-rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		sram@146bf000 {
+			compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
+			reg = <0 0x146bf000 0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lpasscc: clock-controller@17014000 {
+			compatible = "qcom,sdm845-lpasscc";
+			reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
+			reg-names = "cc", "qdsp6ss";
+			#clock-cells = <1>;
+			status = "disabled";
+		};
+
+		gladiator_noc: interconnect@17900000 {
+			compatible = "qcom,sdm845-gladiator-noc";
+			reg = <0 0x17900000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		watchdog@17980000 {
+			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
+			reg = <0 0x17980000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		apss_shared: mailbox@17990000 {
+			compatible = "qcom,sdm845-apss-shared";
+			reg = <0 0x17990000 0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		apps_rsc: rsc@179c0000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x179c0000 0 0x10000>,
+			      <0 0x179d0000 0 0x10000>,
+			      <0 0x179e0000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm845-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdm845-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
+			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller@17a40000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0 0x17a40000 0 0x20000>;
+				status = "disabled";
+			};
+		};
+
+		slimbam: dma-controller@17184000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			qcom,controlled-remotely;
+			reg = <0 0x17184000 0 0x2a000>;
+			num-channels = <31>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x1806 0x0>;
+		};
+
+		timer@17c90000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17c90000 0 0x1000>;
+
+			frame@17ca0000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17ca0000 0x1000>,
+				      <0x17cb0000 0x1000>;
+			};
+
+			frame@17cc0000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17cc0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17cd0000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17cd0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17ce0000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17ce0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17cf0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17cf0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17d00000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17d00000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17d10000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17d10000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		osm_l3: interconnect@17d41000 {
+			compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
+			reg = <0 0x17d41000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@17d43000 {
+			compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			status = "disabled";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			clock-names = "cxo_ref_clk_pin";
+			clocks = <&rpmhcc RPMH_RF_CLK2>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x0040 0x1>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				q6_modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
new file mode 100644
index 000000000..92a812b5f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -0,0 +1,836 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Lenovo Yoga C630
+ *
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ * and enable the IPA device.
+ */
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+	model = "Lenovo Yoga C630";
+	compatible = "lenovo,yoga-c630", "qcom,sdm845";
+	chassis-type = "convertible";
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart6;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
+
+		switch-lid {
+			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+
+		switch-mode {
+			gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+		};
+	};
+
+	/* Reserved memory changes for IPA */
+	reserved-memory {
+		wlan_msa_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x100000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8c515000 {
+			reg = <0 0x8c515000 0 0x2000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8c517000 {
+			reg = <0 0x8c517000 0 0x5a000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8c600000 {
+			reg = <0 0x8c600000 0 0x1a00000>;
+			no-map;
+		};
+	};
+
+	sw_edp_1p2: edp-1p2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sw_edp_1p2";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		pinctrl-0 = <&sw_edp_1p2_en>;
+		pinctrl-names = "default";
+
+		gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&vreg_l2a_1p2>;
+	};
+
+	sn65dsi86_refclk: sn65dsi86-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+
+		clock-frequency = <19200000>;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vlcm_3v3: regulator-vlcm-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vlcm_3v3";
+
+		vin-supply = <&vph_pwr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86 1000000>;
+		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcadsp850.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+
+		vreg_s2a_1p125: smps2 {
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+		};
+
+		vreg_l9a_1p8: ldo9 {
+		};
+
+		vreg_l10a_1p8: ldo10 {
+		};
+
+		vreg_l11a_1p0: ldo11 {
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+		};
+
+		vreg_l16a_2p7: ldo16 {
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3108000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+		};
+
+		vreg_l22a_2p85: ldo22 {
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3083000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3112000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qccdsp850.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+	/* Overwrite pinctrl-0 from sdm845.dtsi */
+	pinctrl-0 = <&qup_i2c3_default &i2c3_hid_active>;
+
+	tsel: hid@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	tsc2: hid@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tsc1: hid@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_hid_active>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sn65dsi86: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sn65dsi86_pin_active>;
+
+		enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+		vcca-supply = <&sw_edp_1p2>;
+		vcc-supply = <&sw_edp_1p2>;
+		vpll-supply = <&vreg_l14a_1p88>;
+		vccio-supply = <&vreg_l14a_1p88>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		no-hpd;
+		#pwm-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&panel_in_edp>;
+				};
+			};
+		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "boe,nv133fhm-n61";
+				backlight = <&backlight>;
+				power-supply = <&vlcm_3v3>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ecsh: hid@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		hid-descr-addr = <0x1>;
+
+		interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c11_hid_active>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&sn65dsi86_in_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/sdm850/LENOVO/81JL/qcdsp2850.mbn";
+};
+
+&pm8998_gpios {
+	/* This pin is pulled down by a fixed resistor */
+	sw_edp_1p2_en: pm8998-gpio9-state {
+		pins = "gpio9";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <0>;
+	};
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sound {
+	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
+	model = "Lenovo-YOGA-C630-13Q50";
+
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
+		"MultiMedia2 Capture", "MM_UL2";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sn65dsi86_pin_active: sn65dsi86-enable-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	i2c3_hid_active: i2c2-hid-active-state {
+		pins = "gpio37";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c5_hid_active: i2c5-hid-active-state {
+		pins = "gpio125";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	i2c11_hid_active: i2c11-hid-active-state {
+		pins = "gpio92";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	lid_pin_active: lid-pin-state {
+		pins = "gpio124";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	mode_pin_active: mode-pin-state {
+		pins = "gpio95";
+		function = "gpio";
+
+		bias-disable;
+	};
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_uart6_4pin>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		vddch1-supply = <&vreg_l23a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	firmware-name = "qcom/sdm850/LENOVO/81JL/qcvss850.mbn";
+	status = "okay";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,3 {
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,4 {
+			compatible = "sdw10217211000";
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
+			reg = <0 4>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
+
+&crypto {
+	/* FIXME: qce_start triggers an SError */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
new file mode 100644
index 000000000..543837316
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Samsung Galaxy Book2
+ *
+ * Copyright (c) 2022, Xilin Wu <strongtz@yeah.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ */
+/delete-node/ &qseecom_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_region;
+/delete-node/ &spss_mem;
+
+/ {
+	model = "Samsung Galaxy Book2";
+	compatible = "samsung,w737", "qcom,sdm845";
+	chassis-type = "convertible";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Firmware initialized the display at 1280p instead of 1440p */
+		framebuffer0: framebuffer@80400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x80400000 0 (1920 * 1280 * 4)>;
+			width = <1920>;
+			height = <1280>;
+			stride = <(1920 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	aliases {
+		serial1 = &uart6;
+	};
+
+	/* Reserved memory changes */
+	reserved-memory {
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@80400000 {
+			reg = <0x0 0x80400000 0x0 0x960000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@8b500000 {
+			reg = <0 0x8b500000 0 0xa00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8d700000 {
+			reg = <0 0x8d700000 0 0x100000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8d800000 {
+			reg = <0 0x8d800000 0 0x5000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e000000 {
+			reg = <0 0x8e000000 0 0x8000000>;
+			no-map;
+		};
+
+		adsp_mem: memory@96000000 {
+			reg = <0 0x96000000 0 0x2000000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98000000 {
+			reg = <0 0x98000000 0 0x800000>;
+			no-map;
+		};
+
+		venus_mem: memory@98800000 {
+			reg = <0 0x98800000 0 0x500000>;
+			no-map;
+		};
+
+		mba_region: memory@98d00000 {
+			reg = <0 0x98d00000 0 0x200000>;
+			no-map;
+		};
+
+		spss_mem: memory@98f00000 {
+			reg = <0 0x98f00000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+
+		vreg_s2a_1p125: smps2 {
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+		};
+
+		vreg_l9a_1p8: ldo9 {
+		};
+
+		vreg_l10a_1p8: ldo10 {
+		};
+
+		vreg_l11a_1p0: ldo11 {
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+		};
+
+		vreg_l16a_2p7: ldo16 {
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_1p8: ldo18 {
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3108000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+		};
+
+		vreg_l22a_2p85: ldo22 {
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3083000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3112000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SN65DSI86 @ 0x2c */
+	/* The panel requires dual DSI, which is not supported by the bridge driver */
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* HID-I2C Touchscreen @ 0x20 */
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+		post-power-on-delay-ms = <120>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf";
+	status = "okay";
+};
+
+/* No idea why it causes an SError when enabled */
+&llcc {
+	status = "disabled";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn";
+};
+
+&qup_i2c10_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung-W737";
+
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
+		"MultiMedia2 Capture", "MM_UL2";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 6>, <85 4>;
+
+	pen_irq_l: pen-irq-l-state {
+		pins = "gpio119";
+		function = "gpio";
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l-state {
+		pins = "gpio124";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-high;
+	};
+
+	pen_rst_l: pen-rst-l-state {
+		pins = "gpio21";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+
+		/*
+		 * The pen driver doesn't currently support
+		 * driving this reset line.  By specifying
+		 * output-high here we're relying on the fact
+		 * that this pin has a default pulldown at boot
+		 * (which makes sure the pen was in reset if it
+		 * was powered) and then we set it high here to
+		 * take it out of reset.  Better would be if the
+		 * pen driver could control this and we could
+		 * remove "output-high" here.
+		 */
+		output-high;
+	};
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qup_uart6_4pin>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		vddch1-supply = <&vreg_l23a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn";
+};
+
+&wcd9340 {
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+
+	swm: swm@c85 {
+		left_spkr: speaker@0,3 {
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: speaker@0,4 {
+			compatible = "sdw10217211000";
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
+			reg = <0 4>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850.dtsi b/arch/arm64/boot/dts/qcom/sdm850.dtsi
new file mode 100644
index 000000000..da9f6fbe3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM850 SoC device tree source
+ *
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include "sdm845.dtsi"
+
+&cpu4_opp_table {
+	cpu4_opp33: opp-2841600000 {
+		opp-hz = /bits/ 64 <2841600000>;
+		opp-peak-kBps = <7216000 25497600>;
+	};
+
+	cpu4_opp34: opp-2956800000 {
+		opp-hz = /bits/ 64 <2956800000>;
+		opp-peak-kBps = <7216000 25497600>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
new file mode 100644
index 000000000..a14e0650c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdx75.dtsi"
+#include "pm7550ba.dtsi"
+#include "pmk8550.dtsi"
+#include "pmx75.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDX75 IDP";
+	compatible = "qcom,sdx75-idp", "qcom,sdx75";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vph_ext: vph-ext-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_ext";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_bob_3p3: pmx75-bob {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_bob_3p3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vph_ext>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmx75-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-supply = <&vreg_s2b_1p224>;
+		vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+		vdd-l3-supply = <&vreg_s7b_0p936>;
+		vdd-l4-l16-supply = <&vreg_s7b_0p936>;
+		vdd-l5-l6-supply = <&vreg_s4b_1p824>;
+		vdd-l7-supply = <&vreg_s7b_0p936>;
+		vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+		vdd-l10-supply = <&vreg_bob_3p3>;
+		vdd-l11-l13-supply = <&vreg_bob_3p3>;
+		vdd-l12-supply = <&vreg_s2b_1p224>;
+		vdd-l14-supply = <&vreg_s3b_0p752>;
+		vdd-l15-supply = <&vreg_s2b_1p224>;
+		vdd-l17-supply = <&vreg_s8b_0p824>;
+		vdd-l19-supply = <&vreg_s7b_0p936>;
+		vdd-l20-l21-supply = <&vreg_s7b_0p936>;
+
+		vreg_s2b_1p224: smps2 {
+			regulator-name = "vreg_s2b_1p224";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		vreg_s3b_0p752: smps3 {
+			regulator-name = "vreg_s3b_0p752";
+			regulator-min-microvolt = <684000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		vreg_s4b_1p824: smps4 {
+			regulator-name = "vreg_s4b_1p824";
+			regulator-min-microvolt = <1824000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_s7b_0p936: smps7 {
+			regulator-name = "vreg_s7b_0p936";
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <1060000>;
+		};
+
+		vreg_s8b_0p824: smps8 {
+			regulator-name = "vreg_s8b_0p824";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_l1b_1p2: ldo1 {
+			regulator-name = "vreg_l1b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_1p128: ldo2 {
+			regulator-name = "vreg_l2b_1p128";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1160000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p896: ldo3 {
+			regulator-name = "vreg_l3b_0p896";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_0p88: ldo4 {
+			regulator-name = "vreg_l4b_0p88";
+			regulator-min-microvolt = <864000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_1p776: ldo5 {
+			regulator-name = "vreg_l5b_1p776";
+			regulator-min-microvolt = <1770000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_0p904: ldo7 {
+			regulator-name = "vreg_l7b_0p904";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p8: ldo8 {
+			regulator-name = "vreg_l8b_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_0p752: ldo9 {
+			regulator-name = "vreg_l9b_0p752";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_3p08: ldo10 {
+			regulator-name = "vreg_l10b_3p08";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p8: ldo11 {
+			regulator-name = "vreg_l11b_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_1p8: ldo13 {
+			regulator-name = "vreg_l13b_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_0p624: ldo14 {
+			regulator-name = "vreg_l14b_0p624";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p2: ldo15 {
+			regulator-name = "vreg_l15b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_0p912: ldo16 {
+			regulator-name = "vreg_l16b_0p912";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_0p752: ldo17 {
+			regulator-name = "vreg_l17b_0p752";
+			regulator-min-microvolt = <684000>;
+			regulator-max-microvolt = <957600>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_0p952: ldo19 {
+			regulator-name = "vreg_l19b_0p952";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20b_0p912: ldo20 {
+			regulator-name = "vreg_l20b_0p912";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21b_0p856: ldo21 {
+			regulator-name = "vreg_l21b_0p856";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&chosen {
+	stdout-path = "serial0:115200n8";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <110 6>;
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
new file mode 100644
index 000000000..e180aa402
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX75 SoC device tree source
+ *
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sdx75-gcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&intc>;
+
+	chosen: chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_0>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_100>;
+
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_200>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_300>;
+
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_OFF: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <235>;
+				exit-latency-us = <428>;
+				min-residency-us = <1774>;
+				arm,psci-suspend-param = <0x40000003>;
+				local-timer-stop;
+			};
+
+			CPU_RAIL_OFF: cpu-rail-sleep-1 {
+				compatible = "arm,idle-state";
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
+				arm,psci-suspend-param = <0x40000004>;
+				local-timer-stop;
+			};
+
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41001344>;
+				entry-latency-us = <2761>;
+				exit-latency-us = <3964>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_SLEEP_2: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100b344>;
+				entry-latency-us = <2793>;
+				exit-latency-us = <4023>;
+				min-residency-us = <9826>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sdx75", "qcom,scm";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&CPU_OFF &CPU_RAIL_OFF>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1 &CLUSTER_SLEEP_2>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gunyah_hyp_mem: gunyah-hyp@80000000 {
+			reg = <0x0 0x80000000 0x0 0x800000>;
+			no-map;
+		};
+
+		hyp_elf_package_mem: hyp-elf-package@80800000 {
+			reg = <0x0 0x80800000 0x0 0x200000>;
+			no-map;
+		};
+
+		access_control_db_mem: access-control-db@81380000 {
+			reg = <0x0 0x81380000 0x0 0x80000>;
+			no-map;
+		};
+
+		qteetz_mem: qteetz@814e0000 {
+			reg = <0x0 0x814e0000 0x0 0x2a0000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@81780000 {
+			reg = <0x0 0x81780000 0x0 0xa00000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: xbl-ramdump@87a00000 {
+			reg = <0x0 0x87a00000 0x0 0x1c0000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw@87c00000 {
+			reg = <0x0 0x87c00000 0x0 0x100000>;
+			no-map;
+		};
+
+		xbl_dtlog_mem: xbl-dtlog@87d00000 {
+			reg = <0x0 0x87d00000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc@87d40000 {
+			reg = <0x0 0x87d40000 0x0 0x40000>;
+			no-map;
+		};
+
+		modem_efs_shared_mem: modem-efs-shared@87d80000 {
+			reg = <0x0 0x87d80000 0x0 0x10000>;
+			no-map;
+		};
+
+		aop_image_mem: aop-image@87e00000 {
+			reg = <0x0 0x87e00000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: smem@87e20000 {
+			reg = <0x0 0x87e20000 0x0 0xc0000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db@87ee0000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x87ee0000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: aop-config@87f00000 {
+			reg = <0x0 0x87f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@87f20000 {
+			reg = <0x0 0x87f20000 0x0 0x10000>;
+			no-map;
+		};
+
+		secdata_mem: secdata@87f30000 {
+			reg = <0x0 0x87f30000 0x0 0x1000>;
+			no-map;
+		};
+
+		tme_crashdump_mem: tme-crashdump@87f31000 {
+			reg = <0x0 0x87f31000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: tme-log@87f71000 {
+			reg = <0x0 0x87f71000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: uefi-log@87f75000 {
+			reg = <0x0 0x87f75000 0x0 0x10000>;
+			no-map;
+		};
+
+		qdss_mem: qdss@88800000 {
+			reg = <0x0 0x88800000 0x0 0x300000>;
+			no-map;
+		};
+
+		audio_heap_mem: audio-heap@88b00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x88b00000 0x0 0x400000>;
+			no-map;
+		};
+
+		mpss_dsmharq_mem: mpss-dsmharq@88f00000 {
+			reg = <0x0 0x88f00000 0x0 0x5080000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb@8df80000 {
+			reg = <0x0 0x8df80000 0x0 0x80000>;
+			no-map;
+		};
+
+		mpssadsp_mem: mpssadsp@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0xf400000>;
+			no-map;
+		};
+
+		gunyah_trace_buffer_mem: gunyah-trace-buffer@bdb00000 {
+			reg = <0x0 0xbdb00000 0x0 0x2000000>;
+			no-map;
+		};
+
+		smmu_debug_buf_mem: smmu-debug-buf@bfb00000 {
+			reg = <0x0 0xbfb00000 0x0 0x100000>;
+			no-map;
+		};
+
+		hyp_smmu_s2_pt_mem: hyp-smmu-s2-pt@bfc00000 {
+			reg = <0x0 0xbfc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	smem: qcom,smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		gcc: clock-controller@80000 {
+			compatible = "qcom,sdx75-gcc";
+			reg = <0x0 0x0080000 0x0 0x1f7400>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb",
+				      "s-ahb";
+			iommus = <&apps_smmu 0xe3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			uart1: serial@984000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qupv3_se1_2uart_active>;
+				pinctrl-1 = <&qupv3_se1_2uart_sleep>;
+				pinctrl-names = "default",
+						"sleep";
+				status = "disabled";
+			};
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sdx75-pdc", "qcom,pdc";
+			reg = <0x0 0xb220000 0x0 0x30000>,
+			      <0x0 0x174000f0 0x0 0x64>;
+			qcom,pdc-ranges = <0 147 52>,
+					  <52 266 32>,
+					  <84 500 59>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>,
+			      <0x0 0x0c4c0000 0x0 0x10000>,
+			      <0x0 0x0c42d000 0x0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f000000 {
+			compatible = "qcom,sdx75-tlmm";
+			reg = <0x0 0x0f000000 0x0 0x400000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 133>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qupv3_se1_2uart_active: qupv3-se1-2uart-active-state {
+				tx-pins {
+					pins = "gpio12";
+					function = "qup_se1_l2_mira";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx-pins {
+					pins = "gpio13";
+					function = "qup_se1_l3_mira";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qupv3_se1_2uart_sleep: qupv3-se1-2uart-sleep-state {
+				pins = "gpio12", "gpio13";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sdx75-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x15000000 0x0 0x40000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			reg = <0x0 0x17200000 0x0 0x10000>,
+			      <0x0 0x17260000 0x0 0x80000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&CLUSTER_PD>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>,
+					  <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>,
+					  <CONTROL_TCS   0>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdx75-rpmh-clk";
+				clocks = <&xo_board>;
+				clock-names = "xo";
+				#clock-cells = <1>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sdx75-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sdx75-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0x0 0x17d91000 0x0 0x1000>;
+			reg-names = "freq-domain0";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GPLL0>;
+			clock-names = "xo",
+				      "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000..75951fd43
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+	model = "OnePlus Nord N100";
+	compatible = "oneplus,billie2", "qcom,sm4250";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+	qcom,board-id = <0x1000b 0x00>;
+
+	aliases {
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+			width = <720>;
+			height = <1600>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+};
+
+&reserved_memory {
+	bootloader_log_mem: memory@5fff7000 {
+		reg = <0x0 0x5fff7000 0x0 0x8000>;
+		no-map;
+	};
+
+	ramoops@cbe00000 {
+		compatible = "ramoops";
+		reg = <0x0 0xcbe00000 0x0 0x400000>;
+		record-size = <0x40000>;
+		pmsg-size = <0x200000>;
+		console-size = <0x40000>;
+		ftrace-size = <0x40000>;
+	};
+
+	param_mem: memory@cc200000 {
+		reg = <0x0 0xcc200000 0x0 0x100000>;
+		no-map;
+	};
+
+	mtp_mem: memory@cc300000 {
+		reg = <0x00 0xcc300000 0x00 0xb00000>;
+		no-map;
+	};
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		vreg_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&vreg_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l12a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4250.dtsi b/arch/arm64/boot/dts/qcom/sm4250.dtsi
new file mode 100644
index 000000000..c5add8f44
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include "sm6115.dtsi"
+
+&CPU0 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU5 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU6 {
+	compatible = "qcom,kryo240";
+};
+
+&CPU7 {
+	compatible = "qcom,kryo240";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
new file mode 100644
index 000000000..00a1c81ca
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sm4450.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. SM4450 QRD";
+	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
+
+	aliases { };
+
+	chosen {
+		bootargs = "console=hvc0";
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
new file mode 100644
index 000000000..c4e5b33f5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks{
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			clock-frequency = <76800000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1550>;
+				min-residency-us = <4791>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41003344>;
+				entry-latency-us = <1561>;
+				exit-latency-us = <2801>;
+				min-residency-us = <8550>;
+			};
+		};
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm4450-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 494 31>,
+					  <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		intc: interrupt-controller@17200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17260000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
new file mode 100644
index 000000000..9b70a8790
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+/dts-v1/;
+
+#include "sm6115.dtsi"
+#include "pm6125.dtsi"
+#include <dt-bindings/arm/qcom,ids.h>
+
+/ {
+	model = "F(x)tec Pro1X (QX1050)";
+	compatible = "fxtec,pro1x", "qcom,sm6115";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
+			width = <1080>;
+			height = <2160>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+};
+
+&dispcc {
+	/* HACK: disable until a panel driver is ready to retain simplefb */
+	status = "disabled";
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s6a: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		pm6125_s7a: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm6125_s8a: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l1a: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm6125_l4a: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm6125_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <3056000>;
+		};
+
+		pm6125_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7a: l7 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10a: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l11a: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l12a: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		pm6125_l13a: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l14a: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15a: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16a: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17a: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		pm6125_l18a: l18 {
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1312000>;
+		};
+
+		pm6125_l19a: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20a: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21a: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		pm6125_l22a: l22 {
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l23a: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24a: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <14 4>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&pm6125_l24a>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&pm6125_l11a>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm6125_l4a>;
+	vdda-pll-supply = <&pm6125_l12a>;
+	vddp-ref-clk-supply = <&pm6125_l18a>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm6125_l4a>;
+	vdda-pll-supply = <&pm6125_l12a>;
+	vdda-phy-dpdm-supply = <&pm6125_l15a>;
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
new file mode 100644
index 000000000..839c60351
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -0,0 +1,3020 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6115.h>
+#include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			clocks = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			clocks = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			clocks = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			clocks = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1638>;
+			dynamic-power-coefficient = <282>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <290>;
+				exit-latency-us = <376>;
+				min-residency-us = <1182>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <297>;
+				exit-latency-us = <324>;
+				min-residency-us = <1110>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_0_SLEEP_0: cluster-sleep-0-0 {
+				/* GDHS */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x40000022>;
+				entry-latency-us = <360>;
+				exit-latency-us = <421>;
+				min-residency-us = <782>;
+			};
+
+			CLUSTER_0_SLEEP_1: cluster-sleep-0-1 {
+				/* Power Collapse */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2118>;
+				min-residency-us = <7376>;
+			};
+
+			CLUSTER_1_SLEEP_0: cluster-sleep-1-0 {
+				/* GDHS */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x40000042>;
+				entry-latency-us = <314>;
+				exit-latency-us = <345>;
+				min-residency-us = <660>;
+			};
+
+			CLUSTER_1_SLEEP_1: cluster-sleep-1-1 {
+				/* Power Collapse */
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <640>;
+				exit-latency-us = <1654>;
+				min-residency-us = <8094>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6115", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0x80000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_0_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_1_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_0_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>;
+		};
+
+		CLUSTER_1_PD: power-domain-cpu-cluster1 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sm6115-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sm6115";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sm6115-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_min_svs: opp1 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp2 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp4 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp5 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp7 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		cdsp_sec_mem: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x6900000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@51400000 {
+			reg = <0x0 0x51400000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@51900000 {
+			reg = <0x0 0x51900000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@51a00000 {
+			reg = <0x0 0x51a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@53800000 {
+			reg = <0x0 0x53800000 0x0 0x2800000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@56100000 {
+			reg = <0x0 0x56100000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@56110000 {
+			reg = <0x0 0x56110000 0x0 0x5000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@56115000 {
+			reg = <0x0 0x56115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		removed_mem: memory@60000000 {
+			reg = <0x0 0x60000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b01000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 30>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6115-tlmm";
+			reg = <0x0 0x00500000 0x0 0x400000>,
+			      <0x0 0x00900000 0x0 0x400000>,
+			      <0x0 0x00d00000 0x0 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 114>; /* GPIOs + ufs_reset */
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_state_on: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_state_off: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6115";
+			reg = <0x0 0x01400000 0x0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_hsphy: phy@1613000 {
+			compatible = "qcom,sm6115-qusb2-phy";
+			reg = <0x0 0x01613000 0x0 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			nvmem-cells = <&qusb2_hstx_trim>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1b04000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01b04000 0x0 0x24000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x92 0>,
+				 <&apps_smmu 0x94 0x11>,
+				 <&apps_smmu 0x96 0x11>,
+				 <&apps_smmu 0x98 0x1>,
+				 <&apps_smmu 0x9F 0>;
+		};
+
+		crypto: crypto@1b3a000 {
+			compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce";
+			reg = <0x0 0x01b3a000 0x0 0x6000>;
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+
+			dmas = <&cryptobam 6>, <&cryptobam 7>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x92 0>,
+				 <&apps_smmu 0x94 0x11>,
+				 <&apps_smmu 0x96 0x11>,
+				 <&apps_smmu 0x98 0x1>,
+				 <&apps_smmu 0x9F 0>;
+		};
+
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		qfprom@1b40000 {
+			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
+			reg = <0x0 0x01b40000 0x0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qusb2_hstx_trim: hstx-trim@25b {
+				reg = <0x25b 0x1>;
+				bits = <1 4>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@6006 {
+				reg = <0x6006 0x2>;
+				bits = <5 8>;
+			};
+		};
+
+		rng: rng@1b53000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x0 0x01b53000 0x0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x01c40000 0x0 0x1100>,
+			      <0x0 0x01e00000 0x0 0x2000000>,
+			      <0x0 0x03e00000 0x0 0x100000>,
+			      <0x0 0x03f00000 0x0 0xa0000>,
+			      <0x0 0x01c0a000 0x0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */
+			      <0x0 0x04410000 0x0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x0 0x045f0000 0x0 0x7000>;
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x0 0x04690000 0x0 0x10000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04744000 0x0 0x1000>,
+			      <0x0 0x04745000 0x0 0x1000>,
+			      <0x0 0x04748000 0x0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
+			clock-names = "iface", "core", "xo", "ice";
+
+			bus-width = <8>;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x04784000 0x0 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			iommus = <&apps_smmu 0x00a0 0x0>;
+			resets = <&gcc GCC_SDCC2_BCR>;
+
+			bus-width = <4>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <1>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc GCC_UFS_PHY_GDSC>;
+			iommus = <&apps_smmu 0x100 0>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+
+			freq-table-hz = <50000000 200000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6115-qmp-ufs-phy";
+			reg = <0x0 0x04807000 0x0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@4807400 {
+				reg = <0x0 0x04807400 0x0 0x098>,
+				      <0x0 0x04807600 0x0 0x130>,
+				      <0x0 0x04807c00 0x0 0x16c>;
+				#phy-cells = <0>;
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0x0 0x04a00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0xf>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0xe3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb: usb@4ef8800 {
+			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
+			reg = <0x0 0x04ef8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x04e00000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				iommus = <&apps_smmu 0x120 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb3_lpm_capable;
+			};
+		};
+
+		gpu: gpu@5900000 {
+			compatible = "qcom,adreno-610.0", "qcom,adreno";
+			reg = <0x0 0x05900000 0x0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			/* There's no (real) GMU, so we have to handle quite a bunch of clocks! */
+			clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_BIMC_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "gmu",
+				      "xo";
+
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 1>;
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&rpmpd SM6115_VDDCX>;
+			qcom,gmu = <&gmu_wrapper>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-320000000 {
+					opp-hz = /bits/ 64 <320000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+					opp-supported-hw = <0x1f>;
+				};
+
+				opp-465000000 {
+					opp-hz = /bits/ 64 <465000000>;
+					required-opps = <&rpmpd_opp_svs>;
+					opp-supported-hw = <0x1f>;
+				};
+
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+					opp-supported-hw = <0x1f>;
+				};
+
+				opp-745000000 {
+					opp-hz = /bits/ 64 <745000000>;
+					required-opps = <&rpmpd_opp_nom>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-820000000 {
+					opp-hz = /bits/ 64 <820000000>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+					opp-supported-hw = <0x7>;
+				};
+
+				opp-900000000 {
+					opp-hz = /bits/ 64 <900000000>;
+					required-opps = <&rpmpd_opp_turbo>;
+					opp-supported-hw = <0x7>;
+				};
+
+				/* Speed bin 2 can reach 950 Mhz instead of 980 like the rest. */
+				opp-950000000 {
+					opp-hz = /bits/ 64 <950000000>;
+					required-opps = <&rpmpd_opp_turbo_plus>;
+					opp-supported-hw = <0x4>;
+				};
+
+				opp-980000000 {
+					opp-hz = /bits/ 64 <980000000>;
+					required-opps = <&rpmpd_opp_turbo_plus>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu_wrapper: gmu@596a000 {
+			compatible = "qcom,adreno-gmu-wrapper";
+			reg = <0x0 0x0596a000 0x0 0x30000>;
+			reg-names = "gmu";
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+		};
+
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,sm6115-gpucc";
+			reg = <0x0 0x05990000 0x0 0x9000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@59a0000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x059a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "mem",
+				      "hlos",
+				      "iface";
+			power-domains = <&gpucc GPU_CX_GDSC>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		mdss: display-subsystem@5e00000 {
+			compatible = "qcom,sm6115-mdss";
+			reg = <0x0 0x05e00000 0x0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x420 0x2>,
+				 <&apps_smmu 0x421 0x0>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdp: display-controller@5e01000 {
+				compatible = "qcom,sm6115-dpu";
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
+				      <0x0 0x05eb0000 0x0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "core",
+					      "lut",
+					      "rot",
+					      "vsync";
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-192000000 {
+						opp-hz = /bits/ 64 <192000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-256000000 {
+						opp-hz = /bits/ 64 <256000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-307200000 {
+						opp-hz = /bits/ 64 <307200000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-384000000 {
+						opp-hz = /bits/ 64 <384000000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@5e94000 {
+				compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x05e94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmpd SM6115_VDDCX>;
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmpd_opp_min_svs>;
+					};
+
+					opp-164000000 {
+						opp-hz = /bits/ 64 <164000000>;
+						required-opps = <&rpmpd_opp_low_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@5e94400 {
+				compatible = "qcom,dsi-phy-14nm-2290";
+				reg = <0x0 0x05e94400 0x0 0x100>,
+				      <0x0 0x05e94500 0x0 0x300>,
+				      <0x0 0x05e94800 0x0 0x188>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6115-dispcc";
+			reg = <0x0 0x05f00000 0 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
+		stm@8002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0x0 0x08002000 0x0 0x1000>,
+			      <0x0 0x0e280000 0x0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel_in0_in>;
+					};
+				};
+			};
+		};
+
+		cti0: cti@8010000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08010000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti1: cti@8011000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08011000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti2: cti@8012000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08012000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti3: cti@8013000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08013000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti4: cti@8014000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08014000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti5: cti@8015000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08015000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti6: cti@8016000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08016000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti7: cti@8017000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08017000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti8: cti@8018000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08018000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti9: cti@8019000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x08019000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti10: cti@801a000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801a000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti11: cti@801b000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801b000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti12: cti@801c000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801c000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti13: cti@801d000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801d000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti14: cti@801e000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801e000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		cti15: cti@801f000 {
+			compatible = "arm,coresight-cti", "arm,primecell";
+			reg = <0x0 0x0801f000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+		};
+
+		replicator@8046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0x0 0x08046000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@8047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x08047000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr@8048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x08048000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@8041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x08041000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_in0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_in0_in: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@8042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x08042000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_in1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_in1_in: endpoint {
+						remote-endpoint = <&funnel_apss1_out>;
+					};
+				};
+			};
+		};
+
+		funnel@8045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x08045000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel_in0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel_in1_out>;
+					};
+				};
+			};
+		};
+
+		etm@9040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09040000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU0>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in0>;
+					};
+				};
+			};
+		};
+
+		etm@9140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09140000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU1>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in1>;
+					};
+				};
+			};
+		};
+
+		etm@9240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09240000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU2>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in2>;
+					};
+				};
+			};
+		};
+
+		etm@9340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09340000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU3>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in3>;
+					};
+				};
+			};
+		};
+
+		etm@9440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09440000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU4>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in4>;
+					};
+				};
+			};
+		};
+
+		etm@9540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09540000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU5>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in5>;
+					};
+				};
+			};
+		};
+
+		etm@9640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09640000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU6>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in6>;
+					};
+				};
+			};
+		};
+
+		etm@9740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x09740000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			cpu = <&CPU7>;
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&funnel_apss0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@9800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x09800000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_apss0_out: endpoint {
+						remote-endpoint = <&funnel_apss1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_apss0_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_apss0_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_apss0_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_apss0_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					funnel_apss0_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					funnel_apss0_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					funnel_apss0_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel_apss0_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@9810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0x0 0x09810000 0x0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
+			clock-names = "apb_pclk";
+
+			status = "disabled";
+
+			out-ports {
+				port {
+					funnel_apss1_out: endpoint {
+						remote-endpoint = <&funnel_in1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_apss1_in: endpoint {
+						remote-endpoint = <&funnel_apss0_out>;
+					};
+				};
+			};
+		};
+
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDD_LPI_CX>,
+					<&rpmpd SM6115_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x01c3 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x01c4 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x01c5 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x01c6 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x01c7 0x0>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b300000 {
+			compatible = "qcom,sm6115-cdsp-pas";
+			reg = <0x0 0x0b300000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6115_VDDCX>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 261 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apcs_glb 28>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0c01 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0c02 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0c03 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x0c04 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x0c05 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x0c06 0x0>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x0c600000 0x0 0x80000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0x0 0x0c800000 0x0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_msa_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x1a0 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		watchdog@f017000 {
+			compatible = "qcom,apss-wdt-sm6115", "qcom,kpss-wdt";
+			reg = <0x0 0x0f017000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6115-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x0 0x0f111000 0x0 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x0f120000 0x0 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@f123000 {
+				reg = <0x0 0x0f123000 0x0 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				reg = <0x0 0x0f124000 0x0 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				reg = <0x0 0x0f125000 0x0 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				reg = <0x0 0x0f126000 0x0 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				reg = <0x0 0x0f127000 0x0 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				reg = <0x0 0x0f128000 0x0 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,
+			      <0x0 0x0f300000 0x0 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cpufreq_hw: cpufreq@f521000 {
+			compatible = "qcom,sm6115-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0x0 0x0f521000 0x0 0x1000>,
+			      <0x0 0x0f523000 0x0 0x1000>;
+
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp-hvx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu45-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu45_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu45_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu45_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu67-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu67_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu67_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu67_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0123-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu0123_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0123_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0123_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		display-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
new file mode 100644
index 000000000..c2d15fc6c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) 2022 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm6115.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Lenovo Tab P11";
+	compatible = "lenovo,j606f", "qcom,sm6115p", "qcom,sm6115";
+	chassis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <445 0x10000>, <420 0x10000>;
+	qcom,board-id = <34 3>;
+
+	aliases {
+		mmc0 = &sdhc_2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2000 * 1200 * 4)>;
+			width = <1200>;
+			height = <2000>;
+			stride = <(1200 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn";
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm6125_l18>;
+	status = "okay";
+
+	panel: panel@0 {
+		compatible = "lenovo,j606f-boe-nt36523w", "novatek,nt36523w";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+		vddio-supply = <&pm6125_l9>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&te_active &mdss_dsi_active>;
+
+		rotation = <180>; /* Yep, it's mounted upside down! */
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pm6125_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm6115/LENOVO/J606F/modem.mbn";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <304000>;
+			regulator-max-microvolt = <1456000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <2080000>;
+		};
+
+		pm6125_s8: s8 {
+			regulator-min-microvolt = <1064000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l1: l1 {
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <488000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1648000>;
+			/* 3.056V capped to 2.96V for SDHCI */
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			/* Broken hw, this one can't be turned off or SDHCI will break! */
+			regulator-always-on;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7: l7 {
+			/* 1.2V-1.304V fixed at 1.256V for SDHCI bias */
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			/*
+			 * TODO: SDHCI seems to also work with this one turned off, however
+			 * there exists a possibility that it may not work with some very
+			 * specific SDCard types, perhaps validating this against a wide
+			 * range of models could rule that out, saving some power would
+			 * certainly be nice..
+			 */
+			regulator-always-on;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <1984000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <2920000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17: l17 {
+			regulator-min-microvolt = <1152000>;
+			regulator-max-microvolt = <1384000>;
+		};
+
+		pm6125_l18: l18 {
+			/* 1.104V-1.312V fixed @ 1.232V for DSIPHY */
+			regulator-min-microvolt = <1232000>;
+			regulator-max-microvolt = <1232000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3600000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2952000>;
+			/* 3.304V capped to 2.96V for SDHCI */
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+			/* Broken hw, this one can't be turned off or SDHCI will break! */
+			regulator-always-on;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3600000>;
+		};
+	};
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on &sdc2_gate_pin>;
+	pinctrl-1 = <&sdc2_state_off>;
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <14 4>;
+
+	/*
+	 * This is a wholly undocumented pin (other than a single vague "pwr-gpios" reference)
+	 * that needs to be toggled for the SD Card slot to work properly..
+	 */
+	sdc2_gate_pin: sdc2-gate-state {
+		pins = "gpio45";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-high;
+	};
+
+	te_active: te-active-state {
+		pins = "gpio81";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	mdss_dsi_active: dsi-active-state {
+		pins = "gpio82";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&pm6125_l24>;
+	vcc-max-microamp = <600000>;
+	vccq2-supply = <&pm6125_l11>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+	vddp-ref-clk-supply = <&pm6125_l18>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_hsphy {
+	vdd-supply = <&pm6125_l4>;
+	vdda-pll-supply = <&pm6125_l12>;
+	vdda-phy-dpdm-supply = <&pm6125_l15>;
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&pm6125_l8>;
+	vdd-1.8-xo-supply = <&pm6125_l16>;
+	vdd-1.3-rfa-supply = <&pm6125_l17>;
+	vdd-3.3-ch0-supply = <&pm6125_l23>;
+	qcom,ath10k-calibration-variant = "Lenovo_P11";
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
new file mode 100644
index 000000000..fb4cba004
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <394 0x10000>; /* sm6125 v1 */
+	qcom,board-id = <34 0>;
+
+	model = "Sony Xperia 10 II";
+	compatible = "sony,pdx201", "qcom,sm6125";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+		mmc1 = &sdhc_2; /* SDC2 SD card slot */
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (2520 * 1080 * 4)>;
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		debug_mem: memory@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: memory@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		rf-pa1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&pm6125_l7>;
+	vdda-pll-supply = <&pm6125_l10>;
+	vdda-phy-dpdm-supply = <&pm6125_l15>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* NXP PN553 NFC @ 28 */
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* Samsung touchscreen @ 48 */
+};
+
+&i2c3 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS35L41 boosted audio amplifier @ 40 */
+};
+
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa0_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	channel@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "camera_flash_therm";
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "emmc_ufs_therm";
+	};
+
+	channel@55 {
+		reg = <ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa1_therm";
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	rf-pa1-therm@3 {
+		reg = <3>;
+		io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpios {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	rf_pa1_therm: rf-pa1-therm-state {
+		pins = "gpio7";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vdd_l2_l3_l4-supply = <&pm6125_l7>;
+		vdd_l5_l15_l19_l20_l21_l22-supply = <&pm6125_l10>;
+
+		/*
+		 * S3/S4 is VDD_CX
+		 * S5 is VDD_MX/WCSS_MX
+		 */
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		pm6125_l1: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		pm6125_l2: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		pm6125_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		pm6125_l7: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		pm6125_l17: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm6125_l24>;
+	vqmmc-supply = <&pm6125_l11>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio47";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
new file mode 100644
index 000000000..272bc85f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "sm6125.dtsi"
+#include "pm6125.dtsi"
+
+/ {
+	model = "Xiaomi Mi A3";
+	compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <394 0>; /* sm6125 v1 */
+	qcom,board-id = <11 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@5c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
+			width = <720>;
+			height = <1560>;
+			stride = <(720 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	reserved-memory {
+		debug_mem: debug@ffb00000 {
+			reg = <0x0 0xffb00000 0x0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0x0 0xffbc0000 0x0 0x80000>;
+			no-map;
+		};
+
+		pstore_mem: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc40000 0x0 0xc0000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+		};
+
+		cmdline_mem: memory@ffd00000 {
+			reg = <0x0 0xffd40000 0x0 0x1000>;
+			no-map;
+		};
+	};
+
+	extcon_usb: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&vol_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	thermal-zones {
+		rf-pa0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		quiet-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <5000>;
+			thermal-sensors = <&pm6125_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm6125_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&hsusb_phy1 {
+	vdd-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-dpdm-supply = <&vreg_l15a>;
+	status = "okay";
+};
+
+&pm6125_adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm>;
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "rf_pa0_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "quiet_therm";
+	};
+
+	channel@52 {
+		reg = <ADC5_GPIO1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "camera_flash_therm";
+	};
+
+	channel@54 {
+		reg = <ADC5_GPIO3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "emmc_ufs_therm";
+	};
+};
+
+&pm6125_adc_tm {
+	status = "okay";
+
+	rf-pa0-therm@0 {
+		reg = <0>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	quiet-therm@1 {
+		reg = <1>;
+		io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	xo-therm@2 {
+		reg = <2>;
+		io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm6125_gpios {
+	camera_flash_therm: camera-flash-therm-state {
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	emmc_ufs_therm: emmc-ufs-therm-state {
+		pins = "gpio6";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-high-impedance;
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio5";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		vreg_s6a: s6 {
+			regulator-min-microvolt = <936000>;
+			regulator-max-microvolt = <1422000>;
+		};
+
+		vreg_l1a: l1 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1256000>;
+		};
+
+		vreg_l2a: l2 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1056000>;
+		};
+
+		vreg_l3a: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1064000>;
+		};
+
+		vreg_l4a: l4 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l5a: l5 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l6a: l6 {
+			regulator-min-microvolt = <576000>;
+			regulator-max-microvolt = <656000>;
+		};
+
+		vreg_l7a: l7 {
+			regulator-min-microvolt = <872000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		vreg_l8a: l8 {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <728000>;
+		};
+
+		vreg_l9a: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+		};
+
+		vreg_l10a: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1896000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11a: l11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l12a: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1996000>;
+		};
+
+		vreg_l13a: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1832000>;
+		};
+
+		vreg_l14a: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l15a: l15 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3232000>;
+		};
+
+		vreg_l16a: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1904000>;
+		};
+
+		vreg_l17a: l17 {
+			regulator-min-microvolt = <1248000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		vreg_l18a: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1264000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l19a: l19 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l20a: l20 {
+			regulator-min-microvolt = <1648000>;
+			regulator-max-microvolt = <2952000>;
+		};
+
+		vreg_l21a: l21 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <2856000>;
+		};
+
+		vreg_l22a: l22 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l23a: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		vreg_l24a: l24 {
+			regulator-min-microvolt = <2944000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio98";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vreg_l22a>;
+	vqmmc-supply = <&vreg_l5a>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l24a>;
+	vccq2-supply = <&vreg_l11a>;
+	vcc-max-microamp = <600000>;
+	vccq2-max-microamp = <600000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l10a>;
+	vdda-phy-max-microamp = <51400>;
+	vdda-pll-max-microamp = <14200>;
+	vddp-ref-clk-supply = <&vreg_l18a>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	extcon = <&extcon_usb>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
new file mode 100644
index 000000000..07081088b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -0,0 +1,1371 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Martin Botka <martin.botka@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sm6125.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "qcom,kryo260";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1638>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6125", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@40000000 {
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x40000000 0x0 0x0>;
+		device_type = "memory";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sm6125-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+
+			interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&apcs_glb 0>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sm6125";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sm6125", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sm6125-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp10 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@45700000 {
+			reg = <0x0 0x45700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@45e00000 {
+			reg = <0x0 0x45e00000 0x0 0x140000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@45fff000 {
+			reg = <0x0 0x45fff000 0x0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@46000000 {
+			reg = <0x0 0x46000000 0x0 0x200000>;
+			no-map;
+		};
+
+		reserved_mem1: memory@46200000 {
+			reg = <0x0 0x46200000 0x0 0x2d00000>;
+			no-map;
+		};
+
+		camera_mem: memory@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x500000>;
+			no-map;
+		};
+
+		modem_mem: memory@4b000000 {
+			reg = <0x0 0x4b000000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		venus_mem: memory@52e00000 {
+			reg = <0x0 0x52e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@53300000 {
+			reg = <0x0 0x53300000 0x0 0x200000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@53500000 {
+			reg = <0x0 0x53500000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		adsp_pil_mem: memory@55300000 {
+			reg = <0x0 0x55300000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@57100000 {
+			reg = <0x0 0x57100000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@57110000 {
+			reg = <0x0 0x57110000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@57115000 {
+			reg = <0x0 0x57115000 0x0 0x2000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@5c000000 {
+			reg = <0x0 0x5c000000 0x0 0x00f00000>;
+			no-map;
+		};
+
+		dfps_data_mem: memory@5cf00000 {
+			reg = <0x0 0x5cf00000 0x0 0x0100000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@5f800000 {
+			reg = <0x0 0x5f800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@5e400000 {
+			reg = <0x0 0x5e400000 0x0 0x1400000>;
+			no-map;
+		};
+
+		sdsp_mem: memory@f3000000 {
+			reg = <0x0 0xf3000000 0x0 0x400000>;
+			no-map;
+		};
+
+		adsp_mem: memory@f3400000 {
+			reg = <0x0 0xf3400000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_ta_mem: memory@13fc00000 {
+			reg = <0x1 0x3fc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00 0xffffffff>;
+		compatible = "simple-bus";
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x00340000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6125-tlmm";
+			reg = <0x00500000 0x400000>,
+			      <0x00900000 0x400000>,
+			      <0x00d00000 0x400000>;
+			reg-names = "west", "south", "east";
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_sleep: qup-i2c0-sleep-state {
+				pins = "gpio0", "gpio1";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c1_sleep: qup-i2c1-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c2_sleep: qup-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup03";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c3_sleep: qup-i2c3-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup04";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c4_sleep: qup-i2c4-sleep-state {
+				pins = "gpio16", "gpio17";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio22", "gpio23";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c5_sleep: qup-i2c5-sleep-state {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio30", "gpio31";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c6_sleep: qup-i2c6-sleep-state {
+				pins = "gpio30", "gpio31";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c7_sleep: qup-i2c7-sleep-state {
+				pins = "gpio28", "gpio29";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio18", "gpio19";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_sleep: qup-i2c8-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio10", "gpio11";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c9_sleep: qup-i2c9-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup00";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_sleep: qup-spi0-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "qup02";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_sleep: qup-spi2-sleep-state {
+				pins = "gpio6", "gpio7", "gpio8", "gpio9";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio22", "gpio23", "gpio24", "gpio25";
+				function = "qup10";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_sleep: qup-spi5-sleep-state {
+				pins = "gpio22", "gpio23", "gpio24", "gpio25";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_default: qup-spi6-default-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_sleep: qup-spi6-sleep-state {
+				pins = "gpio30", "gpio31", "gpio32", "gpio33";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_default: qup-spi8-default-state {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_sleep: qup-spi8-sleep-state {
+				pins = "gpio18", "gpio19", "gpio20", "gpio21";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_default: qup-spi9-default-state {
+				pins = "gpio10", "gpio11", "gpio12", "gpio13";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_sleep: qup-spi9-sleep-state {
+				pins = "gpio10", "gpio11", "gpio12", "gpio13";
+				function = "gpio";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,gcc-sm6125";
+			reg = <0x01400000 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo", "sleep_clk";
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+		};
+
+		hsusb_phy1: phy@1613000 {
+			compatible = "qcom,msm8996-qusb2-phy";
+			reg = <0x01613000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			status = "disabled";
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x045f0000 0x7000>;
+		};
+
+		sdhc_1: mmc@4744000 {
+			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x160 0x0>;
+
+			power-domains = <&rpmpd SM6125_VDDCX>;
+
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040873>;
+
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x04784000 0x1000>;
+			reg-names = "hc";
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x180 0x0>;
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			power-domains = <&rpmpd SM6125_VDDCX>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040873>;
+
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@4804000 {
+			compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "ice_core_clk";
+			freq-table-hz = <50000000 240000000>,
+					<0 0>,
+					<0 0>,
+					<37500000 150000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<75000000 300000000>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+			#reset-cells = <1>;
+
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+
+			lanes-per-direction = <1>;
+
+			iommus = <&apps_smmu 0x200 0x0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@4807000 {
+			compatible = "qcom,sm6125-qmp-ufs-phy";
+			reg = <0x04807000 0xdb8>;
+
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref",
+				      "ref_aux";
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x04a00000 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x136 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04ac0000 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x123 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-1 = <&qup_i2c0_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-1 = <&qup_spi0_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a84000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-1 = <&qup_i2c1_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a88000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-1 = <&qup_i2c2_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04a88000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-1 = <&qup_spi2_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a8c000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-1 = <&qup_i2c3_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04a90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-1 = <&qup_i2c4_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0x04c00000 0x60000>;
+			interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <8>;
+			dma-channel-mask = <0x0f>;
+			iommus = <&apps_smmu 0x156 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x04cc0000 0x2000>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			clock-names = "m-ahb", "s-ahb";
+			iommus = <&apps_smmu 0x143 0x0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c5: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-1 = <&qup_i2c5_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c80000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-1 = <&qup_spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c84000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c6_default>;
+				pinctrl-1 = <&qup_i2c6_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c84000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi6_default>;
+				pinctrl-1 = <&qup_spi6_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c88000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c7_default>;
+				pinctrl-1 = <&qup_i2c7_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c8c000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c8_default>;
+				pinctrl-1 = <&qup_i2c8_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c8c000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi8_default>;
+				pinctrl-1 = <&qup_spi8_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x04c90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_i2c9_default>;
+				pinctrl-1 = <&qup_i2c9_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x04c90000 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-0 = <&qup_spi9_default>;
+				pinctrl-1 = <&qup_spi9_sleep>;
+				pinctrl-names = "default", "sleep";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb3: usb@4ef8800 {
+			compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
+			reg = <0x04ef8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <66666667>;
+
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			qcom,select-utmi-as-pipe-clk;
+			status = "disabled";
+
+			usb3_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0x04e00000 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x100 0x0>;
+				phys = <&hsusb_phy1>;
+				phy-names = "usb2-phy";
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				maximum-speed = "high-speed";
+				dr_mode = "peripheral";
+			};
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0x04690000 0x10000>;
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x01c40000 0x1100>,
+			      <0x01e00000 0x2000000>,
+			      <0x03e00000 0x100000>,
+			      <0x03f00000 0xa0000>,
+			      <0x01c0a000 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0c600000 0x80000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		apcs_glb: mailbox@f111000 {
+			compatible = "qcom,sm6125-apcs-hmss-global",
+				     "qcom,msm8994-apcs-kpss-global";
+			reg = <0x0f111000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@f120000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x0f120000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f121000 0x1000>,
+				      <0x0f122000 0x1000>;
+			};
+
+			frame@f123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0f128000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0f200000 0x20000>,
+			      <0x0f300000 0x100000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08
+			      GIC_PPI 2 0xf08
+			      GIC_PPI 3 0xf08
+			      GIC_PPI 0 0xf08>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
new file mode 100644
index 000000000..dddd6e44d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm6350.dtsi"
+#include "pm6350.dtsi"
+
+/ {
+	model = "Sony Xperia 10 III";
+	compatible = "sony,pdx213", "qcom,sm6350";
+	chassis-type = "handset";
+	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,board-id = <0x1000B 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@a0000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xa0000000 0 0x2300000>;
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			clocks = <&gcc GCC_DISP_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_down_n>;
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	touch_en_vreg: touch-en-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_en_vreg";
+		gpio = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&pm6350_l6>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		pm6350_s1: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_s2: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l2: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l3: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l4: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l5: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l6: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l7: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l8: ldo8 {
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l9: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l11: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l12: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l13: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l14: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l15: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l16: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l18: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l19: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l20: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l21: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6350_l22: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		pm6150l_s8: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l1: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l2: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l3: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l4: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l5: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l6: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l7: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l9: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l10: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_l11: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm6150l_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+		vdd-supply = <&pm6350_l11>;
+		avdd-supply = <&touch_en_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_active>;
+	};
+};
+
+&pm6350_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		power-source = <0>;
+		bias-disable;
+		input-enable;
+	};
+};
+
+&pm6350_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6150l_l9>;
+	vqmmc-supply = <&pm6150l_l6>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
+
+	ts_active: ts-active-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
new file mode 100644
index 000000000..6464e144c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -0,0 +1,2719 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+#include <dt-bindings/clock/qcom,gcc-sm6350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm6350.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm6350-camcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm6350.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+	interrupt-parent = <&intc>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <76800000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32764>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <703>;
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo560";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <703>;
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_PC: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_CX_RET: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41001244>;
+				entry-latency-us = <3638>;
+				exit-latency-us = <4562>;
+				min-residency-us = <8467>;
+			};
+
+			CLUSTER_AOSS_SLEEP: cluster-sleep-2 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100b244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+
+		cpu_idle_states: idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm6350", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			/* DDR: 4-wide, 2 channels, double data rate, L3: 16-wide, 2 channels */
+			opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(547000 * 4 * 2 * 2) (556800 * 16 * 2)>;
+		};
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+		};
+
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1286400 * 16 * 2)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(200000 * 4 * 2 * 2) (300000 * 16 * 2)>;
+		};
+
+		opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (652800 * 16 * 2)>;
+		};
+
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <(768000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (940800 * 16 * 2)>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <(1017000 * 4 * 2 * 2) (1209600 * 16 * 2)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1353000 * 4 * 2 * 2) (1401600 * 16 * 2)>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <(1555000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_PC
+					      &CLUSTER_SLEEP_CX_RET
+					      &CLUSTER_AOSS_SLEEP>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0 0x80700000 0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x80860000 0 0x20000>;
+			no-map;
+		};
+
+		sec_apps_mem: memory@808ff000 {
+			reg = <0 0x808ff000 0 0x1000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0 0x80900000 0 0x200000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@80b00000 {
+			reg = <0 0x80b00000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_camera_mem: memory@86000000 {
+			reg = <0 0x86000000 0 0x500000>;
+			no-map;
+		};
+
+		pil_npu_mem: memory@86500000 {
+			reg = <0 0x86500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@86a00000 {
+			reg = <0 0x86a00000 0 0x500000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@86f00000 {
+			reg = <0 0x86f00000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@88d00000 {
+			reg = <0 0x88d00000 0 0x2800000>;
+			no-map;
+		};
+
+		wlan_fw_mem: memory@8b500000 {
+			reg = <0 0x8b500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@8b700000 {
+			reg = <0 0x8b700000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@8b710000 {
+			reg = <0 0x8b710000 0 0x5400>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@8b800000 {
+			reg = <0 0x8b800000 0 0xf800000>;
+			no-map;
+		};
+
+		cont_splash_memory: memory@a0000000 {
+			reg = <0 0xa0000000 0 0x2300000>;
+			no-map;
+		};
+
+		dfps_data_memory: memory@a2300000 {
+			reg = <0 0xa2300000 0 0x100000>;
+			no-map;
+		};
+
+		removed_region: memory@c0000000 {
+			reg = <0 0xc0000000 0 0x3900000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@f0d00000 {
+			reg = <0 0xf0d00000 0 0x1000>;
+			no-map;
+		};
+
+		debug_region: memory@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_region: memory@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x40000>;
+			no-map;
+		};
+
+		ramoops: ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+
+		cmdline_region: memory@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm6350";
+			reg = <0 0x00100000 0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm6350-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: qfprom@784000 {
+			compatible = "qcom,sm6350-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu-speed-bin@2015 {
+				reg = <0x2015 0x1>;
+				bits = <0 8>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x00793000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		sdhc_1: mmc@7c4000 {
+			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x007c4000 0 0x1000>,
+				<0 0x007c5000 0 0x1000>,
+				<0 0x007c8000 0 0x8000>;
+			reg-names = "hc", "cqhci", "ice";
+
+			interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x60 0x0>;
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
+			qcom,dll-config = <0x000f642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM6350_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			bus-width = <8>;
+			non-removable;
+			supports-cqe;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			compatible = "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart1: serial@884000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SM6350_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@900000 {
+			compatible = "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 646 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 648 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 649 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 650 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 652 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 653 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x4d6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x4c3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c7: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			i2c8: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+
+			uart9: serial@98c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c10: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &clk_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm6350-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm6350-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			clk_virt: interconnect-clk-virt {
+				compatible = "qcom,sm6350-clk-virt";
+				#interconnect-cells = <2>;
+				qcom,bcm-voters = <&apps_bcm_voter>;
+			};
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm6350-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm6350-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f880>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+
+			compute_noc: interconnect-compute-noc {
+				compatible = "qcom,sm6350-compute-noc";
+				#interconnect-cells = <2>;
+				qcom,bcm-voters = <&apps_bcm_voter>;
+			};
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm6350-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x80 0x0>;
+
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk",
+				      "ice_core_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&rpmhcc RPMH_QLINK_CLK>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				 <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm6350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x18c>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x128>,
+				      <0 0x01d87600 0 0x1fc>,
+				      <0 0x01d87c00 0 0x1dc>,
+				      <0 0x01d87800 0 0x128>,
+				      <0 0x01d87a00 0 0x1fc>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sm6350-ipa";
+
+			iommus = <&apps_smmu 0x440 0x0>,
+				 <&apps_smmu 0x442 0x0>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x3000>,
+			      <0 0x01e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_OCIMEM 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory", "imem", "config";
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		adsp: remoteproc@3000000 {
+			compatible = "qcom,sm6350-adsp-pas";
+			reg = <0 0x03000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_LCX>,
+					<&rpmhpd SM6350_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0>;
+						qcom,nsessions = <5>;
+					};
+				};
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-619.0", "qcom,adreno";
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-850000000 {
+					opp-hz = /bits/ 64 <850000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-supported-hw = <0x02>;
+				};
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-supported-hw = <0x04>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0x08>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x10>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+
+				opp-253000000 {
+					opp-hz = /bits/ 64 <253000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xff>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@3d40000 {
+			compatible = "qcom,sm6350-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
+			reg = <0 0x03d40000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb",
+				      "bus",
+				      "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-619.0", "qcom,adreno-gmu";
+			reg = <0 0x03d6a000 0 0x31000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu",
+				    "gmu_pdc",
+				    "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi",
+					  "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb",
+				      "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm6350-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm6350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm6350-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM6350_CX>,
+					<&rpmhpd SM6350_MX>;
+			power-domain-names = "cx", "mx";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1401 0x20>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1402 0x20>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1403 0x20>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1404 0x20>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1405 0x20>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1406 0x20>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1407 0x20>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1408 0x20>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			iommus = <&apps_smmu 0x560 0x0>;
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd SM6350_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <790000 131000>;
+					opp-avg-kBps = <50000 50000>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3190000 294000>;
+					opp-avg-kBps = <261438 300000>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm6350-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm6350-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc_broadcast_base";
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm6350-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sm6350-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pmu@90b6300 {
+			compatible = "qcom,sm6350-llcc-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x090b6300 0x0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+			interconnects = <&clk_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2288000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <14236000>;
+				};
+
+			};
+		};
+
+		pmu@90cd000 {
+			compatible = "qcom,sm6350-cpu-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0x0 0x090cd000 0x0 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+					 &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <762000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <1144000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <1720000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <2597000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <3879000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <5161000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <6881000>;
+				};
+
+				opp-10 {
+					opp-peak-kBps = <7980000>;
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm6350-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre2_noc MASTER_USB3 0 &clk_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x540 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,has-lpm-erratum;
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SOC_AHB_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+					  <&camcc CAMCC_CCI_0_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SOC_AHB_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+					  <&camcc CAMCC_CCI_1_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but unused downstream */
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm6350-camcc";
+			reg = <0 0x0ad00000 0 0x16000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm6350-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+			iommus = <&apps_smmu 0x800 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm6350-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "iface",
+					      "rot",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SM6350_CX>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-373333333 {
+						opp-hz = /bits/ 64 <373333333>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-448000000 {
+						opp-hz = /bits/ 64 <448000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-560000000 {
+						opp-hz = /bits/ 64 <560000000>;
+						required-opps = <&rpmhpd_opp_turbo>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd SM6350_MX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm6350-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm6350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 655 12>, <138 139 15>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm6350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x1000>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c440000 0 0x1100>,
+			      <0 0x0c600000 0 0x2000000>,
+			      <0 0x0e600000 0 0x100000>,
+			      <0 0x0e700000 0 0xa0000>,
+			      <0 0x0c40a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm6350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			wakeup-parent = <&pdc>;
+
+			cci0_default: cci0-default-state {
+				pins = "gpio39", "gpio40";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio39", "gpio40";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio41", "gpio42";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio41", "gpio42";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio43", "gpio44";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio43", "gpio44";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				pins = "gpio25", "gpio26";
+				function = "qup13_f2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio13", "gpio14";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio19", "gpio20";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart1_cts: qup-uart1-cts-default-state {
+				pins = "gpio61";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart1_rts: qup-uart1-rts-default-state {
+				pins = "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			qup_uart1_rx: qup-uart1-rx-default-state {
+				pins = "gpio64";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart1_tx: qup-uart1-tx-default-state {
+				pins = "gpio63";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm6350-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			compatible = "qcom,rpmh-rsc";
+			label = "apps_rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
+					  <WAKE_TCS 3>, <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm6350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm6350-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sm6350-osm-l3", "qcom,osm-l3";
+			reg = <0x0 0x18321000 0x0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,sm6350-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_fw_mem>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x20 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		clock-frequency = <19200000>;
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
new file mode 100644
index 000000000..b2f1bb1d5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+/* PMK8350 is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include "sm6375.dtsi"
+#include "pm6125.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/* PM6125 PON is used and we can't have duplicate labels */
+/delete-node/ &pmk8350_pon;
+
+/ {
+	model = "Sony Xperia 10 IV";
+	compatible = "sony,pdx225", "qcom,sm6375";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@85200000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x85200000 0 0xc00000>;
+
+			width = <1080>;
+			height = <2520>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-0 = <&vol_down_n>;
+		pinctrl-names = "default";
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@85200000 {
+			reg = <0 0x85200000 0 0xc00000>;
+			no-map;
+		};
+
+		ramoops@ffc40000 {
+			compatible = "ramoops";
+			reg = <0 0xffc40000 0 0xb0000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 0x2008>;
+
+		vdd-supply = <&pm6125_l13>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default &ts_avdd_default>;
+	};
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmr735a_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn";
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm6125-regulators";
+
+		pm6125_s5: s5 {
+			regulator-min-microvolt = <382000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		pm6125_s6: s6 {
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <1374000>;
+		};
+
+		pm6125_s7: s7 {
+			regulator-min-microvolt = <1574000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		/*
+		 * S8 is VDD_GFX
+		 * L1 is VDD_LPI_CX
+		 */
+
+		pm6125_l2: l2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l3: l3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l4: l4 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm6125_l5: l5 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l6: l6 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l7: l7 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm6125_l8: l8 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1304000>;
+		};
+
+		pm6125_l9: l9 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l10: l10 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l11: l11 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l12: l12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pm6125_l13: l13 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		pm6125_l14: l14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm6125_l15: l15 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+		};
+
+		pm6125_l16: l16 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+		};
+
+		/* L17 is VDD_LPI_MX */
+
+		pm6125_l18: l18 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <920000>;
+		};
+
+		pm6125_l19: l19 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l20: l20 {
+			regulator-min-microvolt = <1624000>;
+			regulator-max-microvolt = <3304000>;
+		};
+
+		pm6125_l21: l21 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l22: l22 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-allow-set-load;
+		};
+
+		pm6125_l23: l23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3400000>;
+		};
+
+		pm6125_l24: l24 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,rpm-pmr735a-regulators";
+
+		/*
+		 * S1 is VDD_MX
+		 * S2 is VDD_CX
+		 */
+
+		pmr735a_l1: l1 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+		};
+
+		pmr735a_l2: l2 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <796000>;
+		};
+
+		pmr735a_l3: l3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: l4 {
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		pmr735a_l5: l5 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+		};
+
+		pmr735a_l6: l6 {
+			regulator-min-microvolt = <504000>;
+			regulator-max-microvolt = <868000>;
+		};
+
+		pmr735a_l7: l7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+		};
+	};
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	vmmc-supply = <&pm6125_l22>;
+	vqmmc-supply = <&pm6125_l5>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>;
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	ts_avdd_default: ts-avdd-default-state {
+		pins = "gpio59";
+		function = "gpio";
+		drive-strength = <8>;
+		output-high;
+	};
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <19200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
new file mode 100644
index 000000000..e56f7ea4e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -0,0 +1,2504 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/clock/qcom,sm6375-gpucc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board_clk: xo-board-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo660";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <549>;
+				exit-latency-us = <901>;
+				min-residency-us = <1774>;
+				local-timer-stop;
+			};
+
+			LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <915>;
+				min-residency-us = <4001>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <523>;
+				exit-latency-us = <1244>;
+				min-residency-us = <2207>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <526>;
+				exit-latency-us = <1854>;
+				min-residency-us = <5555>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sm6375", "qcom,scm";
+			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+			clock-names = "core";
+			#reset-cells = <1>;
+		};
+	};
+
+	mpm: interrupt-controller {
+		compatible = "qcom,mpm";
+		qcom,rpm-msg-ram = <&apss_mpm>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#power-domain-cells = <0>;
+		interrupt-parent = <&intc>;
+		qcom,mpm-pin-count = <96>;
+		qcom,mpm-pin-map = <5 296>,  /* Soundwire wake_irq */
+				   <12 422>, /* DWC3 ss_phy_irq */
+				   <86 183>, /* MPM wake, SPMI */
+				   <89 314>, /* TSENS0 0C */
+				   <90 315>, /* TSENS1 0C */
+				   <93 164>, /* DWC3 dm_hs_phy_irq */
+				   <94 165>; /* DWC3 dp_hs_phy_irq */
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <(300000 * 32)>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <(556800 * 32)>;
+		};
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(652800 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(921600 * 32)>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(921600 * 32)>;
+		};
+
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+	};
+
+	cpu6_opp_table: opp-table-cpu6 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <(556800 * 32)>;
+		};
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(921600 * 32)>;
+		};
+
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <(1171200 * 32)>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <(1382400 * 32)>;
+		};
+
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(1497600 * 32)>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			power-domains = <&mpm>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmpd_opp_nom>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hypervisor@80000000 {
+			reg = <0 0x80000000 0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0 0x80700000 0 0x100000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi: xbl-uefi-res@80880000 {
+			reg = <0 0x80880000 0 0x14000>;
+			no-map;
+		};
+
+		smem_mem: smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0 0x80900000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		fw_mem: fw@80b00000 {
+			reg = <0 0x80b00000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 {
+			reg = <0 0x80c00000 0 0x1e00000>;
+			no-map;
+		};
+
+		dfps_data_mem: dpfs-data@85e00000 {
+			reg = <0 0x85e00000 0 0x100000>;
+			no-map;
+		};
+
+		pil_wlan_mem: pil-wlan@86500000 {
+			reg = <0 0x86500000 0 0x200000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@86700000 {
+			reg = <0 0x86700000 0 0x2000000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: pil-cdsp@88700000 {
+			reg = <0 0x88700000 0 0x1e00000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@8a500000 {
+			reg = <0 0x8a500000 0 0x500000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: pil-ipa-fw@8aa00000 {
+			reg = <0 0x8aa00000 0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 {
+			reg = <0 0x8aa10000 0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 {
+			reg = <0 0x8aa1a000 0 0x2000>;
+			no-map;
+		};
+
+		pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 {
+			reg = <0 0x8b800000 0 0x10000000>;
+			no-map;
+		};
+
+		removed_mem: removed@c0000000 {
+			reg = <0 0xc0000000 0 0x5100000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@f3900000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xf3900000 0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+		};
+
+		debug_mem: debug@ffb00000 {
+			reg = <0 0xffb00000 0 0xc0000>;
+			no-map;
+		};
+
+		last_log_mem: lastlog@ffbc0000 {
+			reg = <0 0xffbc0000 0 0x80000>;
+			no-map;
+		};
+
+		cmdline_region: cmdline@ffd00000 {
+			reg = <0 0xffd00000 0 0x1000>;
+			no-map;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";
+
+		glink-edge {
+			compatible = "qcom,glink-rpm";
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-sm6375";
+				qcom,glink-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
+					clocks = <&xo_board_clk>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,sm6375-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_min_svs: opp2 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp6 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp8 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+
+						rpmpd_opp_turbo_no_cpr: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wlan_smp2p_in: wlan-wpss-to-ap {
+			qcom,entry-name = "wlan";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		ipcc: mailbox@208000 {
+			compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
+			reg = <0 0x00208000 0 0x1000>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tcsr_mutex: hwlock@340000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x00340000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tlmm: pinctrl@500000 {
+			compatible = "qcom,sm6375-tlmm";
+			reg = <0 0x00500000 0 0x800000>;
+			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 157>;
+			wakeup-parent = <&mpm>;
+			interrupt-controller;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			#gpio-cells = <2>;
+
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup00";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio61", "gpio62";
+				function = "qup01";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio45", "gpio46";
+				function = "qup02";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio19", "gpio20";
+				/* TLMM, GCC and vendor DT all have different indices.. */
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup00";
+				drive-strength = <6>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1400000 {
+			compatible = "qcom,sm6375-gcc";
+			reg = <0 0x01400000 0 0x1f0000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+				 <&sleep_clk>;
+			#power-domain-cells = <1>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@162b000 {
+			compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x0162b000 0 0x400>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "ref";
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spmi_bus: spmi@1c40000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x01c40000 0 0x1100>,
+			      <0 0x01e00000 0 0x2000000>,
+			      <0 0x03e00000 0 0x100000>,
+			      <0 0x03f00000 0 0xa0000>,
+			      <0 0x01c0a000 0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04411000 0 0x140>, /* TM */
+			      <0 0x04410000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <15>;
+		};
+
+		tsens1: thermal-sensor@4413000 {
+			compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+			reg = <0 0x04413000 0 0x140>, /* TM */
+			      <0 0x04412000 0 0x20>;  /* SROT */
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+			#qcom,sensors = <11>;
+		};
+
+		rpm_msg_ram: sram@45f0000 {
+			compatible = "qcom,rpm-msg-ram", "mmio-sram";
+			reg = <0 0x045f0000 0 0x7000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x045f0000 0x7000>;
+
+			apss_mpm: sram@1b8 {
+				reg = <0x1b8 0x48>;
+			};
+		};
+
+		sram@4690000 {
+			compatible = "qcom,rpm-stats";
+			reg = <0 0x04690000 0 0x400>;
+		};
+
+		sdhc_2: mmc@4784000 {
+			compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x04784000 0 0x1000>;
+
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			iommus = <&apps_smmu 0x40 0x0>;
+
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+			};
+		};
+
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04a00000 0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@4ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/*
+			 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
+			 * There is a comment in the included DTSI of another SoC saying that they
+			 * are not "bolled out" (probably meaning not routed to solder balls)
+			 * TLMM driver however, suggests there are as many as 15 QUPs in total!
+			 * Most of which don't even have pin configurations for.. Sad stuff!
+			 */
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04c00000 0 0x60000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@4cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x04cc0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c6: i2c@4c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@4c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@4c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@4c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c8: i2c@4c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@4c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@4c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@4c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@4c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@4c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04c90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmpd SM6375_VDDCX>;
+				operating-points-v2 = <&qup_opp_table>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		usb_1: usb@4ef8800 {
+			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
+			reg = <0 0x04ef8800 0 0x400>;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133333333>;
+
+			interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <&mpm 93 IRQ_TYPE_EDGE_BOTH>,
+					      <&mpm 94 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			/*
+			 * This property is there to allow USB2 to work, as
+			 * USB3 is not implemented yet - (re)move it when
+			 * proper support is in place.
+			 */
+			qcom,select-utmi-as-pipe-clk;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@4e00000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x04e00000 0 0xcd00>;
+				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+				maximum-speed = "high-speed";
+				phys = <&usb_1_hsphy>;
+				phy-names = "usb2-phy";
+				iommus = <&apps_smmu 0xe0 0x0>;
+
+				/* Yes, this impl *does* have an unfunny number of quirks.. */
+				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,usb2-gadget-lpm-disable;
+				snps,dis_u2_susphy_quirk;
+				snps,is-utmi-l1-suspend;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,usb3_lpm_capable;
+				snps,has-lpm-erratum;
+				tx-fifo-resize;
+			};
+		};
+
+		adreno_smmu: iommu@5940000 {
+			compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2";
+			reg = <0 0x05940000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "bus";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		gpucc: clock-controller@5990000 {
+			compatible = "qcom,sm6375-gpucc";
+			reg = <0 0x05990000 0 0x9000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			power-domains = <&rpmpd SM6375_VDDGX>;
+			required-opps = <&rpmpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		remoteproc_mss: remoteproc@6000000 {
+			compatible = "qcom,sm6375-mpss-pas";
+			reg = <0 0x06000000 0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&pil_mpss_wlan_mem>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@a400000 {
+			compatible = "qcom,sm6375-adsp-pas";
+			reg = <0 0x0a400000 0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
+					<&rpmpd SM6375_VDD_LPI_MX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@b000000 {
+			compatible = "qcom,sm6375-cdsp-pas";
+			reg = <0x0 0x0b000000 0x0 0x100000>;
+
+			interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd SM6375_VDDCX>;
+			power-domain-names = "cx";
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
+		sram@c125000 {
+			compatible = "qcom,sm6375-imem", "syscon", "simple-mfd";
+			reg = <0 0x0c125000 0 0x1000>;
+			ranges = <0 0 0x0c125000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@c600000 {
+			compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
+			reg = <0 0x0c600000 0 0x100000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
+					<&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
+					<&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
+			#global-interrupts = <1>;
+			#iommu-cells = <2>;
+		};
+
+		wifi: wifi@c800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x0c800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&pil_wlan_mem>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x80 0x1>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@f200000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
+			      <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
+			interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#redistributor-regions = <1>;
+			#interrupt-cells = <3>;
+			redistributor-stride = <0 0x20000>;
+			interrupt-controller;
+		};
+
+		timer@f420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x0f420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@f421000 {
+				reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <0>;
+			};
+
+			frame@f423000 {
+				reg = <0x0f243000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <1>;
+				status = "disabled";
+			};
+
+			frame@f425000 {
+				reg = <0x0f425000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <2>;
+				status = "disabled";
+			};
+
+			frame@f427000 {
+				reg = <0x0f427000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <3>;
+				status = "disabled";
+			};
+
+			frame@f429000 {
+				reg = <0x0f429000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <4>;
+				status = "disabled";
+			};
+
+			frame@f42b000 {
+				reg = <0x0f42b000 0x1000>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <5>;
+				status = "disabled";
+			};
+
+			frame@f42d000 {
+				reg = <0x0f42d000 0x1000>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				frame-number = <6>;
+				status = "disabled";
+			};
+		};
+
+		cpucp_l3: interconnect@fd90000 {
+			compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3";
+			reg = <0 0x0fd90000 0 0x1000>;
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@fd91000 {
+			compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		mapss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				mapss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss0_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-unk0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu_unk0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-unk1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu_unk1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_unk1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpuss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss0_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				gpuss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpuss1_crit: gpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mapss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				mapss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mapss1_crit: mapss-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cwlan-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cwlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cwlan_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cwlan_crit: cwlan-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		audio-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				audio_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				audio_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				audio_crit: audio-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				ddr_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr_crit: ddr-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6hvx-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				q6hvx_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				q6hvx_crit: q6hvx-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				camera_crit: camera-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				mdm_core0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core0_crit: mdm-core0-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mdm_core1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_core1_crit: mdm-core1-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-vec-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				mdm_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_vec_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				mdm_vec_crit: mdm-vec-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		msm-scl-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				msm_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				msm_scl_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				msm_scl_crit: msm-scl-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				video_crit: video-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
new file mode 100644
index 000000000..18171c5d8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -0,0 +1,723 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+/* PMK8350 (in reality a PMK8003) is configured to use SID6 instead of 0 */
+#define PMK8350_SID 6
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7225.dtsi"
+#include "pm6150l.dtsi"
+#include "pm6350.dtsi"
+#include "pm7250b.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	model = "Fairphone 4";
+	compatible = "fairphone,fp4", "qcom,sm7225";
+	chassis-type = "handset";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <434 0x10000>, <459 0x10000>;
+	qcom,board-id = <8 32>;
+
+	aliases {
+		serial0 = &uart9;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		framebuffer0: framebuffer@a000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xa0000000 0 (2340 * 1080 * 4)>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin>;
+
+		key-volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reserved-memory {
+		/*
+		 * The rmtfs memory region in downstream is 'dynamically allocated'
+		 * but given the same address every time. Hard code it as this address is
+		 * where the modem firmware expects it to be.
+		 */
+		memory@efe01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xefe01000 0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+	};
+
+	thermal-zones {
+		chg-skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm7250b_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm6350-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s1a: smps1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s2a: smps2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		vreg_l2a: ldo2 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a: ldo3 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-min-microvolt = <352000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-min-microvolt = <1503000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a: ldo11 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a: ldo12 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a: ldo13 {
+			regulator-min-microvolt = <570000>;
+			regulator-max-microvolt = <650000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a: ldo14 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a: ldo15 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a: ldo16 {
+			regulator-min-microvolt = <830000>;
+			regulator-max-microvolt = <921000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a: ldo18 {
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1049000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a: ldo19 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a: ldo20 {
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <801000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a: ldo21 {
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <825000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a: ldo22 {
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm6150l-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s8e: smps8 {
+			regulator-min-microvolt = <313000>;
+			regulator-max-microvolt = <1395000>;
+		};
+
+		vreg_l1e: ldo1 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e: ldo2 {
+			regulator-min-microvolt = <1170000>;
+			regulator-max-microvolt = <1305000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e: ldo3 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1299000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4e: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5e: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7e: ldo7 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9e: ldo9 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10e: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11e: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3401000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <5492000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+};
+
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX582 @ 0x1a */
+};
+
+&cci0_i2c1 {
+	/* IMX582 @ 0x1a */
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	/* IMX576 @ 0x10 */
+};
+
+&cdsp {
+	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* ST21NFCD NFC @ 8 */
+	/* VL53L3 ToF @ 29 */
+	/* AW88264A amplifier @ 34 */
+	/* AW88264A amplifier @ 35 */
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* HX83112A touchscreen @ 48 */
+};
+
+&i2c10 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* PM8008 PMIC @ 8 and 9 */
+	/* PX8618 @ 26 */
+	/* SMB1395 PMIC @ 34 */
+
+	haptics@5a {
+		compatible = "awinic,aw8695";
+		reg = <0x5a>;
+		interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+
+		awinic,f0-preset = <2350>;
+		awinic,f0-coefficient = <260>;
+		awinic,f0-calibration-percent = <7>;
+		awinic,drive-level = <125>;
+
+		awinic,f0-detection-play-time = <5>;
+		awinic,f0-detection-wait-time = <3>;
+		awinic,f0-detection-repeat = <2>;
+		awinic,f0-detection-trace = <15>;
+
+		awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>;
+		awinic,tset = /bits/ 8 <0x12>;
+		awinic,r-spare = /bits/ 8 <0x68>;
+
+		awinic,bemf-upper-threshold = <4104>;
+		awinic,bemf-lower-threshold = <1016>;
+	};
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/sm7225/fairphone4/ipa_fws.mdt";
+	status = "okay";
+};
+
+&mpss {
+	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
+	status = "okay";
+};
+
+&pm6150l_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>;
+		led-max-microamp = <180000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>;
+		led-max-microamp = <180000>;
+		flash-max-microamp = <1000000>;
+		flash-max-timeout-us = <1280000>;
+	};
+};
+
+&pm6150l_wled {
+	qcom,switching-freq = <800>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+
+	status = "okay";
+};
+
+&pm6350_gpios {
+	gpio_keys_pin: gpio-keys-state {
+		pins = "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+		bias-pull-up;
+		input-enable;
+		power-source = <0>;
+	};
+};
+
+&pm6350_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm7250b_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "charger_skin_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "conn_therm";
+	};
+};
+
+&pm7250b_adc_tm {
+	status = "okay";
+
+	charger-skin-therm@0 {
+		reg = <0>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	conn-therm@1 {
+		reg = <1>;
+		io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	channel@644 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "xo_therm";
+	};
+};
+
+&qup_uart1_cts {
+	/*
+	 * Configure a bias-bus-hold on CTS to lower power
+	 * usage when Bluetooth is turned off. Bus hold will
+	 * maintain a low power state regardless of whether
+	 * the Bluetooth module drives the pin in either
+	 * direction or leaves the pin fully unpowered.
+	 */
+	bias-bus-hold;
+};
+
+&qup_uart1_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart1_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&qup_uart1_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9e>;
+	vqmmc-supply = <&vreg_l6e>;
+
+	cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <13 4>, <56 2>;
+
+	qup_uart1_sleep_cts: qup-uart1-sleep-cts-state {
+		pins = "gpio61";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart1_sleep_rts: qup-uart1-sleep-rts-state {
+		pins = "gpio62";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart1_sleep_rx: qup-uart1-sleep-rx-state {
+		pins = "gpio64";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart1_sleep_tx: qup-uart1-sleep-tx-state {
+		pins = "gpio63";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+};
+
+&uart1 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 64 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart1_sleep_cts>, <&qup_uart1_sleep_rts>, <&qup_uart1_sleep_tx>, <&qup_uart1_sleep_rx>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3988-bt";
+
+		vddio-supply = <&vreg_l11a>;
+		vddxo-supply = <&vreg_l7a>;
+		vddrf-supply = <&vreg_l2e>;
+		vddch0-supply = <&vreg_l10e>;
+		swctrl-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7e>;
+	vcc-max-microamp = <800000>;
+	vccq2-supply = <&vreg_l12a>;
+	vccq2-max-microamp = <800000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l18a>;
+	vdda-pll-supply = <&vreg_l22a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l18a>;
+	vdda-pll-supply = <&vreg_l2a>;
+	vdda-phy-dpdm-supply = <&vreg_l3a>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l22a>;
+	vdda-pll-supply = <&vreg_l16a>;
+
+	status = "okay";
+};
+
+&wifi {
+	vdd-0.8-cx-mx-supply = <&vreg_l4a>;
+	vdd-1.8-xo-supply = <&vreg_l7a>;
+	vdd-1.3-rfa-supply = <&vreg_l2e>;
+	vdd-3.3-ch0-supply = <&vreg_l10e>;
+	vdd-3.3-ch1-supply = <&vreg_l11e>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm7225.dtsi b/arch/arm64/boot/dts/qcom/sm7225.dtsi
new file mode 100644
index 000000000..b7b4044e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7225.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+#include "sm6350.dtsi"
+
+/* SM7225 uses Kryo 570 instead of Kryo 560 */
+&CPU0 { compatible = "qcom,kryo570"; };
+&CPU1 { compatible = "qcom,kryo570"; };
+&CPU2 { compatible = "qcom,kryo570"; };
+&CPU3 { compatible = "qcom,kryo570"; };
+&CPU4 { compatible = "qcom,kryo570"; };
+&CPU5 { compatible = "qcom,kryo570"; };
+&CPU6 { compatible = "qcom,kryo570"; };
+&CPU7 { compatible = "qcom,kryo570"; };
+
+&cpu0_opp_table {
+	opp-1804800000 {
+		opp-hz = /bits/ 64 <1804800000>;
+		opp-peak-kBps = <(1804000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+};
+
+&cpu6_opp_table {
+	opp-2131200000 {
+		opp-hz = /bits/ 64 <2131200000>;
+		opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+
+	opp-2208000000 {
+		opp-hz = /bits/ 64 <2208000000>;
+		opp-peak-kBps = <(2092000 * 4 * 2 * 2) (1459200 * 16 * 2)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
new file mode 100644
index 000000000..f4c6e1309
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8150 HDK";
+	compatible = "qcom,sm8150-hdk", "qcom,sm8150";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdda_wcss_pll:
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_pdphy:
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_csi_0_0p9:
+		vdda_csi_1_0p9:
+		vdda_csi_2_0p9:
+		vdda_csi_3_0p9:
+		vdda_dsi_0_0p9:
+		vdda_dsi_1_0p9:
+		vdda_dsi_0_pll_0p9:
+		vdda_dsi_1_pll_0p9:
+		vdda_pcie_1ln_core:
+		vdda_pcie_2ln_core:
+		vdda_pll_hv_cc_ebi01:
+		vdda_pll_hv_cc_ebi23:
+		vdda_qrefs_0p875_5:
+		vdda_sp_sensor:
+		vdda_ufs_2ln_core_1:
+		vdda_ufs_2ln_core_2:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_usb_hs_1p8:
+		vdda_qrefs_vref_1p8:
+		vddpx_10_a:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_wcss_adcdac_1:
+		vdda_wcss_adcdac_22:
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_hv_refgen0:
+		vdda_qlink_hv_ck:
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_2p85: ldo5 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p85: ldo6 {
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+
+	firmware-name = "qcom/sm8150/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+
+	firmware-name = "qcom/sm8150/cdsp.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+
+	firmware-name = "qcom/sm8150/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <126 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
new file mode 100644
index 000000000..b039773c4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Microsoft Surface Duo";
+	compatible = "microsoft,surface-duo", "qcom,sm8150";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8150 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdda_wcss_pll:
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_pdphy:
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_csi_0_0p9:
+		vdda_csi_1_0p9:
+		vdda_csi_2_0p9:
+		vdda_csi_3_0p9:
+		vdda_dsi_0_0p9:
+		vdda_dsi_1_0p9:
+		vdda_dsi_0_pll_0p9:
+		vdda_dsi_1_pll_0p9:
+		vdda_pcie_1ln_core:
+		vdda_pcie_2ln_core:
+		vdda_pll_hv_cc_ebi01:
+		vdda_pll_hv_cc_ebi23:
+		vdda_qrefs_0p875_5:
+		vdda_sp_sensor:
+		vdda_ufs_2ln_core_1:
+		vdda_ufs_2ln_core_2:
+		vdda_usb_ss_dp_core_1:
+		vdda_usb_ss_dp_core_2:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_usb_hs_1p8:
+		vdda_qrefs_vref_1p8:
+		vddpx_10_a:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_wcss_adcdac_1:
+		vdda_wcss_adcdac_22:
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_hv_refgen0:
+		vdda_qlink_hv_ck:
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_2p85: ldo5 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p85: ldo6 {
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bq27742@55 {
+		compatible = "ti,bq27742";
+		reg = <0x55>;
+	};
+
+	da7280@4a {
+		compatible = "dlg,da7280";
+		reg = <0x4a>;
+		interrupts-extended = <&tlmm 42 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "da7280_default";
+		pinctrl-0 = <&da7280_intr_default>;
+
+		dlg,actuator-type = "LRA";
+		dlg,dlg,const-op-mode = <1>;
+		dlg,dlg,periodic-op-mode = <1>;
+		dlg,nom-microvolt = <2000000>;
+		dlg,abs-max-microvolt = <2000000>;
+		dlg,imax-microamp = <129000>;
+		dlg,resonant-freq-hz = <180>;
+		dlg,impd-micro-ohms = <14300000>;
+		dlg,freq-track-enable;
+		dlg,bemf-sens-enable;
+		dlg,mem-array = <
+		  0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a
+		  0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29
+		  0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01
+		  0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06
+		  0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08
+		  0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84
+		  0x5e 0x05 0x84 0x5e 0x08 0x84 0x5f 0x01 0x8c 0x5e
+		  0x04 0x84 0x5e 0x08 0x84 0x5f 0x11 0x19 0x88 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+		>;
+	};
+
+	/* SMB1381 @ 0x44 */
+	/* MAX34417 @ 0x1c */
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SMB1355 @ 0x0c */
+	/* SMB1390 @ 0x10 */
+};
+
+&i2c17 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bq27742@55 {
+		compatible = "ti,bq27742";
+		reg = <0x55>;
+	};
+};
+
+&i2c19 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* MAX34417 @ 0x12 */
+	/* MAX34417 @ 0x1a */
+	/* MAX34417 @ 0x1e */
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/cdsp.mdt";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/modem.mdt";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <126 4>;
+
+	da7280_intr_default: da7280-intr-default-state {
+		pins = "gpio42";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
new file mode 100644
index 000000000..286350ac7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8150 MTP";
+	compatible = "qcom,sm8150-mtp", "qcom,sm8150";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8150 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_2p0: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vdda_wcss_pll:
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_pdphy:
+		vdda_usb_hs_3p1:
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_usb_hs_core:
+		vdda_csi_0_0p9:
+		vdda_csi_1_0p9:
+		vdda_csi_2_0p9:
+		vdda_csi_3_0p9:
+		vdda_dsi_0_0p9:
+		vdda_dsi_1_0p9:
+		vdda_dsi_0_pll_0p9:
+		vdda_dsi_1_pll_0p9:
+		vdda_pcie_1ln_core:
+		vdda_pcie_2ln_core:
+		vdda_pll_hv_cc_ebi01:
+		vdda_pll_hv_cc_ebi23:
+		vdda_qrefs_0p875_5:
+		vdda_sp_sensor:
+		vdda_ufs_2ln_core_1:
+		vdda_ufs_2ln_core_2:
+		vdda_usb_ss_dp_core_1:
+		vdda_usb_ss_dp_core_2:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_usb_hs_1p8:
+		vdda_qrefs_vref_1p8:
+		vddpx_10_a:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_2p7: ldo13 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_wcss_adcdac_1:
+		vdda_wcss_adcdac_22:
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_hv_refgen0:
+		vdda_qlink_hv_ck:
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+
+		vreg_l2f_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_2p85: ldo5 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p85: ldo6 {
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	/*
+	 * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it
+	 * after display support is added on this board.
+	 */
+	compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon";
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/adsp.mdt";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8150/cdsp.mdt";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8150/modem.mdt";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8150/slpi.mdt";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <126 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l10a_2p5>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l9a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
+	vdda-pll-supply = <&vreg_l3c_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vdda_wcss_pll>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vdda_wcss_adcdac_1>;
+	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
new file mode 100644
index 000000000..b27804032
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+	model = "Sony Xperia 5";
+	compatible = "sony,bahamut-generic", "qcom,sm8150";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
new file mode 100644
index 000000000..0d6deceed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8150-sony-xperia-kumano.dtsi"
+
+/ {
+	model = "Sony Xperia 1";
+	compatible = "sony,griffin-generic", "qcom,sm8150";
+	chassis-type = "handset";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
new file mode 100644
index 000000000..ae0ca48b8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+
+/ {
+	qcom,msm-id = <339 0x20000>; /* SM8150 v2 */
+	qcom,board-id = <8 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 0x2300000>;
+			/* Griffin BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet (& no dispcc either)..
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	cam0_vdig_vreg: cam0-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera0_vdig_vreg";
+		gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&main_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam1_vdig_vreg: cam1-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera1_vdig_vreg";
+		gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&sub_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam2_vdig_vreg: cam2-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera2_vdig_vreg";
+		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&chat_cam_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam3_vdig_vreg: cam3-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera3_vdig_vreg";
+		gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&supwc_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	cam_vmdr_vreg: cam-vmdr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vmdr_vreg";
+		gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&main_cam_pwr_vmdr_en>;
+		pinctrl-names = "default";
+	};
+
+	rgbcir_vreg: rgbcir-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "rgbcir_vreg";
+		gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rgbc_ir_pwr_en>;
+		pinctrl-names = "default";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/*
+	 * Apparently RPMh does not provide support for PM8150 S4 because it
+	 * is always-on; model it as a fixed regulator.
+	 */
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		mpss_mem: memory@8dc00000 {
+			reg = <0x0 0x8dc00000 0x0 0x9600000>;
+			no-map;
+		};
+
+		venus_mem: memory@97200000 {
+			reg = <0x0 0x97200000 0x0 0x500000>;
+			no-map;
+		};
+
+		slpi_mem: memory@97700000 {
+			reg = <0x0 0x97700000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@98b00000 {
+			reg = <0x0 0x98b00000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@98b10000 {
+			reg = <0x0 0x98b10000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@98b15000 {
+			reg = <0x0 0x98b15000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: memory@98c00000 {
+			reg = <0x0 0x98c00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98d00000 {
+			reg = <0x0 0x98d00000 0x0 0x1400000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2400000>;
+			no-map;
+		};
+
+		cdsp_sec_mem: memory@a4c00000 {
+			reg = <0x0 0xa4c00000 0x0 0x3c00000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp_mem {
+	reg = <0x0 0x8be00000 0x0 0x1e00000>;
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s2a_0p6: smps2 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1a_0p75: ldo1 {
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <752000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p8: ldo3 {
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p875: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_2p5: ldo10 {
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_0p8: ldo11 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p7: ldo15 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p8: ldo18 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+		vdd-flash-supply = <&vreg_bob>;
+		vdd-rgb-supply = <&vreg_bob>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+
+		vreg_s1c_1p1: smps1 {
+			regulator-min-microvolt = <1128000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p3: ldo2 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_1p2: ldo3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PM8009 is not present on these boards, even if downstream sources suggest so. */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Qcom SMB1355 @ c */
+	/* Qcom SMB1390 @ 10 */
+	/* Qcom FSA4480 USB-C audio switch @ 43 */
+
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <47 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c10 {
+	status = "okay";
+
+	/* Samsung touchscreen @ 48 */
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "",
+			  "NC",
+			  "NC",
+			  "",
+			  "NC",
+			  "SUPWC_PWR_EN",
+			  "",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	supwc_pwr_en: supwc-pwr-en-state {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <1>;
+		power-source = <1>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "TS_VDDH_EN",
+			  "LCD_ID",
+			  "",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */
+			  "NC",
+			  "MAIN_CAM_PWR_VMDR_EN",
+			  "NC",
+			  "",
+			  "NC",
+			  "NC",
+			  "FP_LDO_EN",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "NC";
+
+	main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state {
+		pins = "gpio3";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <0>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+	cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <126 4>;
+	gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK",
+			  "NFC_ESE_SPI_CS_N",
+			  "NC",
+			  "NC",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "MDP_VSYNC_P",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL", /* GPIO_10 */
+			  "CAM_SOF",
+			  "CAM2_RST_N",
+			  "CAM_MCLK0",
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "CCI_I2C_SDA0",
+			  "CCI_I2C_SCL0",
+			  "CCI_I2C_SDA1",
+			  "CCI_I2C_SCL1", /* GPIO_20 */
+			  "NC",
+			  "MAIN_CAM_PWR_EN",
+			  "CAM3_RST_N",
+			  "NC",
+			  "CHAT_CAM_PWR_EN",
+			  "NC",
+			  "NC",
+			  "CAM0_RST_N",
+			  "RGBC_IR_PWR_EN",
+			  "CAM1_RST_N", /* GPIO_30 */
+			  "CCI_I2C_SDA2",
+			  "CCI_I2C_SCL2",
+			  "CCI_I2C_SDA3",
+			  "CCI_I2C_SCL3",
+			  "NC",
+			  "DEBUG_GPIO1",
+			  "RGBC_IR_INT",
+			  "USB_CC_DIR",
+			  "NC",
+			  "NC", /* GPIO_40 */
+			  "NFC_EN",
+			  "NFC_ESE_PWR_REQ",
+			  "BT_HCI_UART_CTS_N",
+			  "BT_HCI_UART_RFR_N",
+			  "BT_HCI_UART_TXD",
+			  "BT_HCI_UART_RXD",
+			  "NFC_IRQ",
+			  "NFC_DWL_REQ",
+			  "UIM2_DETECT_EN",
+			  "WLAN_SW_CTRL", /* GPIO_50 */
+			  "APPS_I2C_SDA",
+			  "APPS_I2C_SCL",
+			  "NC",
+			  "TS_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "NC", /* GPIO_60 */
+			  "QLINK_REQUEST",
+			  "QLINK_ENABLE",
+			  "WMSS_RESET_N",
+			  "SDM_GRFC_8",
+			  "WDOG_DISABLE",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "MSS_LTE_COXM_TXD",
+			  "MSS_LTE_COXM_RXD", /* GPIO_70 */
+			  "SDM_RFFE0_DATA",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE1_DATA",
+			  "SDM_RFFE1_CLK",
+			  "SDM_RFFE2_DATA",
+			  "SDM_RFFE2_CLK",
+			  "SDM_RFFE3_DATA",
+			  "SDM_RFFE3_CLK",
+			  "SUB_CAM_PWR_EN",
+			  "FP_RESET_N", /* GPIO_80 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "DVDT_WRT_DET_AND",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UDON_SWITCH_SEL",
+			  "SD_CARD_DET_N",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "USB_AUDIO_EN1", /* GPIO_100 */
+			  "DISP_ERR_FG",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_DET",
+			  "UIM1_DATA",
+			  "UIM1_CLK", /* GPIO_110 */
+			  "UIM1_RESET",
+			  "UIM1_PRESENT",
+			  "NFC_CLK_REQ",
+			  "SW_SERVICE",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "ALS_PROX_INT_N",
+			  "FP_INT",
+			  "DVDT_WRT_DET_OR",
+			  "BAROMETER_INT", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "TS_INT_N",
+			  "CODEC_INT1_N",
+			  "CODEC_INT2_N",
+			  "TX_GTR_THRES_IN",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "NC", /* GPIO_130 */
+			  "DVDT_ENABLE",
+			  "ACCEL_INT",
+			  "NC",
+			  "MAG_INT_N",
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "HW_ID_1",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "NC",
+			  "CODEC_RST_N",
+			  "CDC_SPI_MISO",
+			  "CDC_SPI_MOSI",
+			  "CDC_SPI_SCLK",
+			  "CDC_SPI_CS_N",
+			  "NC",
+			  "LPASS_SLIMBUS_CLK",
+			  "LPASS_SLIMBUS_DATA0", /* GPIO_150 */
+			  "LPASS_SLIMBUS_DATA1",
+			  "USB_AUDIO_EN2",
+			  "BT_FM_SLIMBUS_DATA",
+			  "BT_FM_SLIMBUS_CLK",
+			  "COMPASS_I2C_SDA",
+			  "COMPASS_I2C_SCL",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N", /* GPIO_160 */
+			  "SSC_SENSOR_I2C_SDA",
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SSC_UART_1_TX",
+			  "SSC_UART_1_RX",
+			  "WL_CMD_CLK_CHAIN0",
+			  "WL_CMD_DATA_CHAIN0", /* GPIO_170 */
+			  "WL_CMD_CLK_CHAIN1",
+			  "WL_CMD_DATA_CHAIN1",
+			  "WL_BT_COEX_CLK",
+			  "WL_BT_COEX_DATA";
+
+	main_cam_pwr_en: main-cam-pwr-en-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	chat_cam_pwr_en: chat-cam-pwr-en-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
+		pins = "gpio29";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	sub_cam_pwr_en: sub-cam-pwr-en-state {
+		pins = "gpio79";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
new file mode 100644
index 000000000..f7e35e220
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -0,0 +1,5206 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Linaro Limited
+ */
+
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8150.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <488>;
+			dynamic-power-coefficient = <232>;
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <369>;
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <369>;
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <369>;
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <421>;
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "little-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <355>;
+				exit-latency-us = <909>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "big-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <241>;
+				exit-latency-us = <1461>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp3: opp-499200000 {
+			opp-hz = /bits/ 64 <499200000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		cpu0_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <800000 12902400>;
+		};
+
+		cpu0_opp5: opp-672000000 {
+			opp-hz = /bits/ 64 <672000000>;
+			opp-peak-kBps = <800000 15974400>;
+		};
+
+		cpu0_opp6: opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp7: opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp8: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		cpu0_opp9: opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-peak-kBps = <1804000 22732800>;
+		};
+
+		cpu0_opp10: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <2188000 25804800>;
+		};
+
+		cpu0_opp11: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <2188000 31948800>;
+		};
+
+		cpu0_opp12: opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu0_opp13: opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu0_opp14: opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu0_opp15: opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <3072000 40550400>;
+		};
+
+		cpu0_opp16: opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <3072000 40550400>;
+		};
+
+		cpu0_opp17: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <3072000 43008000>;
+		};
+
+		cpu0_opp18: opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-peak-kBps = <3072000 43008000>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <1804000 15974400>;
+		};
+
+		cpu4_opp2: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu4_opp3: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 22732800>;
+		};
+
+		cpu4_opp4: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 25804800>;
+		};
+
+		cpu4_opp5: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu4_opp6: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu4_opp7: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu4_opp8: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu4_opp9: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu4_opp10: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 43008000>;
+		};
+
+		cpu4_opp11: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <6220000 43008000>;
+		};
+
+		cpu4_opp12: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <6220000 49152000>;
+		};
+
+		cpu4_opp13: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <7216000 49152000>;
+		};
+
+		cpu4_opp14: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <8368000 49152000>;
+		};
+
+		cpu4_opp15: opp-2227200000 {
+			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp16: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp17: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp1: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu7_opp2: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 22732800>;
+		};
+
+		cpu7_opp3: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 25804800>;
+		};
+
+		cpu7_opp4: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 31948800>;
+		};
+
+		cpu7_opp5: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu7_opp6: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 31948800>;
+		};
+
+		cpu7_opp7: opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu7_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 40550400>;
+		};
+
+		cpu7_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 43008000>;
+		};
+
+		cpu7_opp10: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <6220000 43008000>;
+		};
+
+		cpu7_opp11: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <6220000 49152000>;
+		};
+
+		cpu7_opp12: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <7216000 49152000>;
+		};
+
+		cpu7_opp13: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <8368000 49152000>;
+		};
+
+		cpu7_opp14: opp-2227200000 {
+			opp-hz = /bits/ 64 <2227200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp15: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp16: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp17: opp-2534400000 {
+			opp-hz = /bits/ 64 <2534400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp18: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp19: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp20: opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8150", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_mem: memory@85d00000 {
+			reg = <0x0 0x85d00000 0x0 0x140000>;
+			no-map;
+		};
+
+		aop_mem: memory@85f00000 {
+			reg = <0x0 0x85f00000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_cmd_db: memory@85f20000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x85f20000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@86000000 {
+			reg = <0x0 0x86000000 0x0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3900000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@89b00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x89b00000 0x0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		camera_mem: memory@8b700000 {
+			reg = <0x0 0x8b700000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x180000>;
+			no-map;
+		};
+
+		npu_mem: memory@8bd80000 {
+			reg = <0x0 0x8bd80000 0x0 0x80000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8d800000 {
+			reg = <0x0 0x8d800000 0x0 0x9600000>;
+			no-map;
+		};
+
+		venus_mem: memory@96e00000 {
+			reg = <0x0 0x96e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		slpi_mem: memory@97300000 {
+			reg = <0x0 0x97300000 0x0 0x1400000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@98700000 {
+			reg = <0x0 0x98700000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@98710000 {
+			reg = <0x0 0x98710000 0x0 0x5000>;
+			no-map;
+		};
+
+		gpu_mem: memory@98715000 {
+			reg = <0x0 0x98715000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_mem: memory@98800000 {
+			reg = <0x0 0x98800000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98900000 {
+			reg = <0x0 0x98900000 0x0 0x1400000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@9e400000 {
+			reg = <0x0 0x9e400000 0x0 0x1400000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 6>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-lpass {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+
+		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apss_shared 26>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		slpi_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		slpi_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8150";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+		};
+
+		gpi_dma0: dma-controller@800000 {
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x00d6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		ethernet: ethernet@20000 {
+			compatible = "qcom,sm8150-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth", "rgmii";
+			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+			clocks = <&gcc GCC_EMAC_AXI_CLK>,
+				<&gcc GCC_EMAC_SLV_AHB_CLK>,
+				<&gcc GCC_EMAC_PTP_CLK>,
+				<&gcc GCC_EMAC_RGMII_CLK>;
+			interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+
+			power-domains = <&gcc EMAC_GDSC>;
+			resets = <&gcc GCC_EMAC_BCR>;
+
+			iommus = <&apps_smmu 0x3c0 0x0>;
+
+			snps,tso;
+			rx-fifo-depth = <4096>;
+			tx-fifo-depth = <4096>;
+
+			status = "disabled";
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8150-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@133 {
+				reg = <0x133 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xc3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x0616 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x603 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart9_default>;
+				pinctrl-names = "default";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00094000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma2: dma-controller@c00000 {
+			compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00c00000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x07b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00cc0000 0x0 0x6000>;
+
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x7a3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c17: i2c@c80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@c80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c80000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@c84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@c84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c84000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@c88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@c88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c88000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@c8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@c8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c8c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@c90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@c90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c90000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@c94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00c94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@c94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00c94000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8150-config-noc";
+			reg = <0 0x01500000 0 0x7400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm8150-system-noc";
+			reg = <0 0x01620000 0 0x19400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@163a000 {
+			compatible = "qcom,sm8150-mc-virt";
+			reg = <0 0x0163a000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8150-aggre1-noc";
+			reg = <0 0x016e0000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8150-aggre2-noc";
+			reg = <0 0x01700000 0 0x20000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1720000 {
+			compatible = "qcom,sm8150-compute-noc";
+			reg = <0 0x01720000 0 0x7000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8150-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8150-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma@10a2000 {
+			compatible = "qcom,sm8150-dcc", "qcom,dcc";
+			reg = <0x0 0x010a2000 0x0 0x1000>,
+			      <0x0 0x010ad000 0x0 0x3000>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8150";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			iommu-map = <0x0   &apps_smmu 0x1d80 0x1>,
+				    <0x100 &apps_smmu 0x1d81 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8150";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1e00 0x1>,
+				    <0x100 &apps_smmu 0x1e01 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+			enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x2500>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			iommus = <&apps_smmu 0x300 0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 300000000>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8150-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <8>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x502 0x0641>,
+				 <&apps_smmu 0x504 0x0011>,
+				 <&apps_smmu 0x506 0x0011>,
+				 <&apps_smmu 0x508 0x0011>,
+				 <&apps_smmu 0x512 0x0000>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x502 0x0641>,
+				 <&apps_smmu 0x504 0x0011>,
+				 <&apps_smmu 0x506 0x0011>,
+				 <&apps_smmu 0x508 0x0011>,
+				 <&apps_smmu 0x512 0x0000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "memory";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr_regs_1: syscon@1f60000 {
+			compatible = "qcom,sm8150-tcsr", "syscon";
+			reg = <0x0 0x01f60000 0x0 0x20000>;
+		};
+
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8150-slpi-pas";
+			reg = <0x0 0x02400000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_LCX>,
+					<&rpmhpd SM8150_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&slpi_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
+				label = "dsps";
+				qcom,remote-pid = <3>;
+				mboxes = <&apss_shared 24>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x05a1 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x05a2 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x05a3 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		gpu: gpu@2c00000 {
+			compatible = "qcom,adreno-640.1", "qcom,adreno";
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0x2>;
+				};
+
+				opp-585000000 {
+					opp-hz = /bits/ 64 <585000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-499200000 {
+					opp-hz = /bits/ 64 <499200000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-427000000 {
+					opp-hz = /bits/ 64 <427000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sm8150-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+		};
+
+		tlmm: pinctrl@3100000 {
+			compatible = "qcom,sm8150-pinctrl";
+			reg = <0x0 0x03100000 0x0 0x300000>,
+			      <0x0 0x03500000 0x0 0x300000>,
+			      <0x0 0x03900000 0x0 0x300000>,
+			      <0x0 0x03D00000 0x0 0x300000>;
+			reg-names = "west", "east", "north", "south";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&tlmm 0 0 176>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			wakeup-parent = <&pdc>;
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <0x02>;
+				bias-disable;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio114", "gpio115";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "qup1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio126", "gpio127";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio126", "gpio127", "gpio128", "gpio129";
+				function = "qup2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio144", "gpio145";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio144", "gpio145", "gpio146", "gpio147";
+				function = "qup3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio51", "gpio52";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio51", "gpio52", "gpio53", "gpio54";
+				function = "qup4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio121", "gpio122";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio119", "gpio120", "gpio121", "gpio122";
+				function = "qup5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi6_default: qup-spi6_default-state {
+				pins = "gpio4", "gpio5", "gpio6", "gpio7";
+				function = "qup6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio98", "gpio99";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi7_default: qup-spi7_default-state {
+				pins = "gpio98", "gpio99", "gpio100", "gpio101";
+				function = "qup7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio88", "gpio89";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi8_default: qup-spi8-default-state {
+				pins = "gpio88", "gpio89", "gpio90", "gpio91";
+				function = "qup8";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio39", "gpio40";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi9_default: qup-spi9-default-state {
+				pins = "gpio39", "gpio40", "gpio41", "gpio42";
+				function = "qup9";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart9_default: qup-uart9-default-state {
+				pins = "gpio41", "gpio42";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio9", "gpio10";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi10_default: qup-spi10-default-state {
+				pins = "gpio9", "gpio10", "gpio11", "gpio12";
+				function = "qup10";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio94", "gpio95";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi11_default: qup-spi11-default-state {
+				pins = "gpio92", "gpio93", "gpio94", "gpio95";
+				function = "qup11";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio83", "gpio84";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi12_default: qup-spi12-default-state {
+				pins = "gpio83", "gpio84", "gpio85", "gpio86";
+				function = "qup12";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio43", "gpio44";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi13_default: qup-spi13-default-state {
+				pins = "gpio43", "gpio44", "gpio45", "gpio46";
+				function = "qup13";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio47", "gpio48";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi14_default: qup-spi14-default-state {
+				pins = "gpio47", "gpio48", "gpio49", "gpio50";
+				function = "qup14";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio27", "gpio28";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi15_default: qup-spi15-default-state {
+				pins = "gpio27", "gpio28", "gpio29", "gpio30";
+				function = "qup15";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio86", "gpio85";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi16_default: qup-spi16-default-state {
+				pins = "gpio83", "gpio84", "gpio85", "gpio86";
+				function = "qup16";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio55", "gpio56";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi17_default: qup-spi17-default-state {
+				pins = "gpio55", "gpio56", "gpio57", "gpio58";
+				function = "qup17";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio23", "gpio24";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi18_default: qup-spi18-default-state {
+				pins = "gpio23", "gpio24", "gpio25", "gpio26";
+				function = "qup18";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio57", "gpio58";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi19_default: qup-spi19-default-state {
+				pins = "gpio55", "gpio56", "gpio57", "gpio58";
+				function = "qup19";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio35";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio36";
+					function = "pci_e0";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio37";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio102";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio103";
+					function = "pci_e1";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio104";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8150-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_CX>,
+					<&rpmhpd SM8150_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>,
+			      <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel0_out: endpoint {
+						remote-endpoint = <&merge_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel1_out: endpoint {
+						remote-endpoint = <&merge_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel1_in4: endpoint {
+						remote-endpoint = <&swao_replicator_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6043000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06043000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel2_out: endpoint {
+						remote-endpoint = <&merge_funnel_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel2_in2: endpoint {
+						remote-endpoint = <&apss_merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					merge_funnel_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					merge_funnel_in0: endpoint {
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					merge_funnel_in1: endpoint {
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					merge_funnel_in2: endpoint {
+						remote-endpoint = <&funnel2_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&replicator1_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in0: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf@6047000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06047000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_in: endpoint {
+						remote-endpoint = <&merge_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x05e0 0x0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		replicator@604a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x0604a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_out: endpoint {
+						remote-endpoint = <&swao_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					replicator1_in: endpoint {
+						remote-endpoint = <&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@6b08000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06b08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_funnel_out: endpoint {
+						remote-endpoint = <&swao_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					swao_funnel_in: endpoint {
+						remote-endpoint = <&replicator1_out>;
+					};
+				};
+			};
+		};
+
+		etf@6b09000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b09000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					swao_etf_out: endpoint {
+						remote-endpoint = <&swao_replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_etf_in: endpoint {
+						remote-endpoint = <&swao_funnel_out>;
+					};
+				};
+			};
+		};
+
+		replicator@6b0a000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b0a000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
+
+			out-ports {
+				port {
+					swao_replicator_out: endpoint {
+						remote-endpoint = <&funnel1_in4>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					swao_replicator_in: endpoint {
+						remote-endpoint = <&swao_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 { /* APSS Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_funnel_out: endpoint {
+						remote-endpoint = <&apss_merge_funnel_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					apss_merge_funnel_out: endpoint {
+						remote-endpoint = <&funnel2_in2>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					apss_merge_funnel_in: endpoint {
+						remote-endpoint = <&apss_funnel_out>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8150-cdsp-pas";
+			reg = <0x0 0x08300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_CX>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&cdsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+				mboxes = <&apss_shared 4>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1001 0x0460>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1002 0x0460>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0460>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0460>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0460>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x0460>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x0460>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1008 0x0460>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sm8150-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8150-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8150-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x10>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		usb_2_qmpphy: phy@88eb000 {
+			compatible = "qcom,sm8150-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88eb200 {
+				reg = <0 0x088eb200 0 0x200>,
+				      <0 0x088eb400 0 0x200>,
+				      <0 0x088eb800 0 0x800>,
+				      <0 0x088eb600 0 0x200>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x6a0 0x0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd 0>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sm8150-dc-noc";
+			reg = <0 0x09160000 0 0x3200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sm8150-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x140 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x160 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sm8150-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8150-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "nrt_bus", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x800 0x420>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8150-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm-8150";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm-8150";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8150-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			power-domains = <&rpmhpd SM8150_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8150-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0x0 0x0c300000 0x0 0x400>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&apss_shared 0>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8150-adsp-pas";
+			reg = <0x0 0x17300000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8150_CX>;
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apss_shared 8>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1b23 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1b24 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1b25 0x0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apss_shared: mailbox@17c00000 {
+			compatible = "qcom,sm8150-apss-shared",
+				     "qcom,sdm845-apss-shared";
+			reg = <0x0 0x17c00000 0x0 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c26000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+			      <0x0 0x18210000 0x0 0x10000>,
+			      <0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8150-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8150-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <224>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		osm_l3: interconnect@18321000 {
+			compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3";
+			reg = <0 0x18321000 0 0x1400>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
+			      <0 0x18327800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		lmh_cluster1: lmh@18350800 {
+			compatible = "qcom,sm8150-lmh";
+			reg = <0 0x18350800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <60000>;
+			qcom,lmh-temp-low-millicelsius = <84500>;
+			qcom,lmh-temp-high-millicelsius = <85000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@18358800 {
+			compatible = "qcom,sm8150-lmh";
+			reg = <0 0x18358800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <60000>;
+			qcom,lmh-temp-low-millicelsius = <84500>;
+			qcom,lmh-temp-high-millicelsius = <85000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			memory-region = <&wlan_mem>;
+			clock-names = "cxo_ref_clk_pin", "qdss";
+			clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>;
+			interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&apps_smmu 0x0640 0x1>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-vec-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-scl-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				modem_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
new file mode 100644
index 000000000..1bbb71e1a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8250 HDK";
+	compatible = "qcom,sm8250-hdk", "qcom,sm8250";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart12;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1824000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_3p3: ldo16 {
+			regulator-name = "vreg_l16a_3p3";
+			regulator-min-microvolt = <3024000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_2p96: ldo17 {
+			regulator-name = "vreg_l17a_2p96";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p92: ldo18 {
+			regulator-name = "vreg_l18a_0p92";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_l1f_cam_dvdd1_1p1: ldo1 {
+			regulator-name = "vreg_l1f_cam_dvdd1_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_cam_dvdd0_1p2: ldo2 {
+			regulator-name = "vreg_l2f_cam_dvdd0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_cam_dvdd2_1p05: ldo3 {
+			regulator-name = "vreg_l3f_cam_dvdd2_1p05";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_cam_avdd0_2p85: ldo5 {
+			regulator-name = "vreg_l5f_cam_avdd0_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_cam_avdd1_2p8: ldo6 {
+			regulator-name = "vreg_l6f_cam_avdd1_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <40 4>;
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p92>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&venus {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
new file mode 100644
index 000000000..7ef99038c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8250 MTP";
+	compatible = "qcom,sm8250-mtp", "qcom,sm8250";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart12;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s4a_1p8>;
+		vdd-rxtx-supply = <&vreg_s4a_1p8>;
+		vdd-io-supply = <&vreg_s4a_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		conn-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150b_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mmw-pa1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mmw-pa2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150l_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8150_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8150-s4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p875: ldo5 {
+			regulator-name = "vreg_l5a_0p875";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p7: ldo7 {
+			regulator-name = "vreg_l7a_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-name = "vreg_l10a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13a_ts_3p0: ldo13 {
+			regulator-name = "vreg_l13a_ts_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_11ad_io_1p8: ldo15 {
+			regulator-name = "vreg_l15a_11ad_io_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-name = "vreg_l16a_2p7";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <4000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_s8c_1p3: smps8 {
+			regulator-name = "vreg_s8c_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p2: ldo2 {
+			regulator-name = "vreg_l2c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p92: ldo3 {
+			regulator-name = "vreg_l3c_0p92";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p7: ldo4 {
+			regulator-name = "vreg_l4c_1p7";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_cam_vcm0_2p85: ldo7 {
+			regulator-name = "vreg_l7c_cam_vcm0_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p0: ldo10 {
+			regulator-name = "vreg_l10c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p3: ldo11 {
+			regulator-name = "vreg_l11c_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p3>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_l1f_cam_dvdd1_1p1: ldo1 {
+			regulator-name = "vreg_l1f_cam_dvdd1_1p1";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_cam_dvdd0_1p2: ldo2 {
+			regulator-name = "vreg_l2f_cam_dvdd0_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_cam_dvdd2_1p05: ldo3 {
+			regulator-name = "vreg_l3f_cam_dvdd2_1p05";
+			regulator-min-microvolt = <1056000>;
+			regulator-max-microvolt = <1056000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5f_cam_avdd0_2p85: ldo5 {
+			regulator-name = "vreg_l5f_cam_avdd0_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_cam_avdd1_2p85: ldo6 {
+			regulator-name = "vreg_l6f_cam_avdd1_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <2856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/a650_zap.mbn";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* NQ NFC chip @28 */
+};
+
+&i2c13 {
+	status = "okay";
+
+	/* st,stmfts @ 49 */
+};
+
+&i2c15 {
+	status = "okay";
+
+	/* smb1390 @ 10 */
+	/* rtc6226 @ 64 */
+};
+
+&pm8150_adc {
+	channel@4c {
+		reg = <ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "xo_therm";
+	};
+
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "pa_therm1";
+	};
+};
+
+&pm8150_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-therm1@2 {
+		reg = <2>;
+		io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150b_adc {
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "conn_therm";
+	};
+};
+
+&pm8150b_adc_tm {
+	status = "okay";
+
+	conn-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_adc_tm {
+	status = "okay";
+
+	camera-flash-therm@0 {
+		reg = <0>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-msm-therm@1 {
+		reg = <1>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	pa-therm2@2 {
+		reg = <2>;
+		io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pm8150l_adc {
+	channel@4d {
+		reg = <ADC5_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "camera_flash_therm";
+	};
+
+	channel@4e {
+		reg = <ADC5_AMUX_THM2_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "skin_msm_therm";
+	};
+
+	channel@4f {
+		reg = <ADC5_AMUX_THM3_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		label = "pa_therm2";
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8250/slpi.mbn";
+};
+
+&sound {
+	compatible = "qcom,sm8250-sndcard";
+	model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"AMIC3", "MIC BIAS3",
+		"AMIC4", "MIC BIAS3",
+		"AMIC5", "MIC BIAS4",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_ADC3", "ADC4_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
+		};
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: speaker@0,3 {
+		compatible = "sdw10217211000";
+		reg = <0 3>;
+		powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+	};
+
+	right_spkr: speaker@0,4 {
+		compatible = "sdw10217211000";
+		reg = <0 4>;
+		powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 3 4 5>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <40 4>;
+
+	wcd938x_reset_default: wcd938x-reset-default-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		output-high;
+	};
+
+	wcd938x_reset_sleep: wcd938x-reset-sleep-state {
+		pins = "gpio32";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <750000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <700000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p875>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p875>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&venus {
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
new file mode 100644
index 000000000..b70bf9261
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8250-sony-xperia-edo.dtsi"
+
+/ {
+	model = "Sony Xperia 1 II";
+	compatible = "sony,pdx203-generic", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+/delete-node/ &vreg_l7f_1p8;
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+		vin5-supply = <&vreg_s1f_1p2>;
+		vin6-supply = <&vreg_s1f_1p2>;
+
+		pinctrl-0 = <&cam_pwr_b_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_1_ldo1: ldo1 {
+				regulator-name = "slg51000_b_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_1_ldo2: ldo2 {
+				regulator-name = "slg51000_b_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_1_ldo3: ldo3 {
+				regulator-name = "slg51000_b_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_1_ldo4: ldo4 {
+				regulator-name = "slg51000_b_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_1_ldo5: ldo5 {
+				regulator-name = "slg51000_b_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_1_ldo6: ldo6 {
+				regulator-name = "slg51000_b_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_1_ldo7: ldo7 {
+				regulator-name = "slg51000_b_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
+		vin5-supply = <&vreg_l2f_1p3>;
+		vin6-supply = <&vreg_l2f_1p3>;
+
+		pinctrl-0 = <&cam_pwr_a_cs>;
+		pinctrl-names = "default";
+
+		regulators {
+			slg51000_0_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_0_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_0_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_0_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_0_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_0_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_0_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "CAM_PWR_LD_EN",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "NC",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "WLC_EN_N", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "AUX3_THERM", /* GPIO_10 */
+			  "DTV_PWR_EN",
+			  "PM3003A_MODE";
+};
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "CAM_PWR_A_CS",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "CAM4_MCLK",
+			  "TOF_RST_N",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL", /* GPIO_120 */
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+
+	cam_pwr_b_cs: cam-pwr-b-state {
+		pins = "gpio69";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	cam_pwr_a_cs: cam-pwr-a-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
new file mode 100644
index 000000000..58a521046
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8250-sony-xperia-edo.dtsi"
+
+/ {
+	model = "Sony Xperia 5 II";
+	compatible = "sony,pdx206-generic", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
+
+&gpio_keys {
+	pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
+	g-assist-key {
+		label = "Google Assistant Key";
+		linux,code = <KEY_LEFTMETA>;
+		gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+		debounce-interval = <15>;
+		linux,can-disable;
+		wakeup-source;
+	};
+};
+
+&pm8009_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "WIDEC_PWR_EN",
+			  "NC";
+};
+
+&pm8150_gpios {
+	gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
+			  "OPTION_2",
+			  "NC",
+			  "PM_SLP_CLK_IN",
+			  "OPTION_1",
+			  "G_ASSIST_N",
+			  "NC",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "NC"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
+			  "FOCUS_N",
+			  "NC",
+			  "NC",
+			  "RF_LCD_ID_EN",
+			  "NC",
+			  "NC",
+			  "LCD_ID",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "RF_ID";
+};
+
+&pm8150l_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "PM3003A_EN",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "AUX2_THERM",
+			  "BB_HP_EN",
+			  "FP_LDO_EN",
+			  "PMX_RESET_N",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "PM3003A_MODE";
+};
+
+&tlmm {
+	gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
+			  "MDM2AP_ERR_FATAL",
+			  "AP_CTI_OUT",
+			  "MDM2AP_STATUS",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_PWR_REQ",
+			  "DVDT_WRT_DET_AND",
+			  "SPK_AMP_RESET_N", /* GPIO_10 */
+			  "SPK_AMP_INT_N",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "TX_GTR_THRES_IN",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_20 */
+			  "HST_BT_EN",
+			  "RGBC_IR_PWR_EN",
+			  "FP_INT_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_SCLK", /* GPIO_30 */
+			  "NFC_ESE_SPI_CS_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "SDM_DEBUG_UART_TX",
+			  "SDM_DEBUG_UART_RX",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "TS_INT_N",
+			  "FP_SPI_MISO", /* GPIO_40 */
+			  "FP_SPI_MOSI",
+			  "FP_SPI_SCLK",
+			  "FP_SPI_CS_N",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "DISP_ERR_FG",
+			  "UIM2_DETECT_EN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_50 */
+			  "NC",
+			  "MDM_UART_CTS",
+			  "MDM_UART_RFR",
+			  "MDM_UART_TX",
+			  "MDM_UART_RX",
+			  "AP2MDM_STATUS",
+			  "AP2MDM_ERR_FATAL",
+			  "MDM_IPC_HS_UART_TX",
+			  "MDM_IPC_HS_UART_RX",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_PWR_B_CS",
+			  "NC", /* GPIO_70 */
+			  "FRONTC_PWR_EN",
+			  "SBU_SW_SEL",
+			  "SBU_SW_OE",
+			  "FP_RESET_N",
+			  "FP_RESET_N",
+			  "DISP_RESET_N",
+			  "DEBUG_GPIO0",
+			  "TRAY_DET",
+			  "CAM2_RST_N",
+			  "PCIE0_RST_N",
+			  "PCIE0_CLK_REQ_N", /* GPIO_80 */
+			  "PCIE0_WAKE_N",
+			  "DVDT_ENABLE",
+			  "DVDT_WRT_DET_OR",
+			  "NC",
+			  "PCIE2_RST_N",
+			  "PCIE2_CLK_REQ_N",
+			  "PCIE2_WAKE_N",
+			  "MDM_VFR_IRQ0",
+			  "MDM_VFR_IRQ1",
+			  "SW_SERVICE", /* GPIO_90 */
+			  "CAM_SOF",
+			  "CAM1_RST_N",
+			  "CAM0_RST_N",
+			  "CAM0_MCLK",
+			  "CAM1_MCLK",
+			  "CAM2_MCLK",
+			  "CAM3_MCLK",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_100 */
+			  "CCI0_I2C_SDA",
+			  "CCI0_I2C_SCL",
+			  "CCI1_I2C_SDA",
+			  "CCI1_I2C_SCL_",
+			  "CCI2_I2C_SDA",
+			  "CCI2_I2C_SCL",
+			  "CCI3_I2C_SDA",
+			  "CCI3_I2C_SCL",
+			  "CAM3_RST_N",
+			  "NFC_DWL_REQ", /* GPIO_110 */
+			  "NFC_IRQ",
+			  "XVS",
+			  "NC",
+			  "RF_ID_EXTENSION",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "ACC_COVER_OPEN",
+			  "ALS_PROX_INT_N",
+			  "ACCEL_INT",
+			  "WLAN_SW_CTRL",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "UDON_SWITCH_SEL",
+			  "WDOG_DISABLE",
+			  "BAROMETER_INT",
+			  "NC", /* GPIO_130 */
+			  "NC",
+			  "FORCED_USB_BOOT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC", /* GPIO_140 */
+			  "NC",
+			  "BT_SLIMBUS_CLK",
+			  "BT_SLIMBUS_DATA",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0", /* GPIO_150 */
+			  "WCD_SWR_RX_DATA1",
+			  "SDM_DMIC_CLK1",
+			  "SDM_DMIC_DATA1",
+			  "SDM_DMIC_CLK2",
+			  "SDM_DMIC_DATA2",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN",
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "COMPASS_I2C_SDA", /* GPIO_160 */
+			  "COMPASS_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "SSC_SPI_1_MISO",
+			  "SSC_SPI_1_MOSI",
+			  "SSC_SPI_1_CLK",
+			  "SSC_SPI_1_CS_N",
+			  "NC",
+			  "NC",
+			  "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
+			  "SSC_SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_SNS_UART6_TX",
+			  "HST_BLE_SNS_UART6_RX",
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
+
+&vreg_l2f_1p3 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
new file mode 100644
index 000000000..ecdc20bc1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -0,0 +1,715 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &cdsp_secure_heap;
+
+/ {
+	qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x10008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9c000000 0 0x2300000>;
+			/* pdx203 BL initializes in 2.5k mode, not 4k */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet..
+			 */
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+				 <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+				 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+				 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+				 <&dispcc DISP_CC_MDSS_ESC0_CLK>;
+			power-domains = <&dispcc MDSS_GDSC>;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+		pinctrl-names = "default";
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		adsp_mem: memory@8a100000 {
+			reg = <0x0 0x8a100000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: memory@8c600000 {
+			reg = <0x0 0x8c600000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@8c700000 {
+			reg = <0x0 0x8c700000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x1000>;
+			console-size = <0x40000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p2>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1824000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p6: smps6 {
+			regulator-name = "vreg_s6a_0p6";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/*
+	 * Remaining regulators that are not yet supported:
+	 * OLEDB: 4925000-8100000
+	 * ab: 4600000-6100000
+	 * ibb: 800000-5400000
+	 */
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p2>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p2: smps8 {
+			regulator-name = "vreg_s8c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p2>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	nfc@28 {
+		compatible = "nxp,nxp-nci-i2c";
+		reg = <0x28>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <111 IRQ_TYPE_EDGE_RISING>;
+
+		enable-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		firmware-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <39 0x2008>;
+		/* It's "vddio" downstream but it works anyway! */
+		vdd-supply = <&vreg_l1c_1p8>;
+		avdd-supply = <&vreg_l10c_3p3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Qcom SMB1390 @ 10 */
+	/* Qcom SMB1390_slave @ 18 */
+	/* HALO HL6111R Qi charger @ 25 */
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pcie2 {
+	status = "okay";
+
+	pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
+};
+
+&pcie2_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+};
+
+&pm8150_gpios {
+	vol_down_n: vol-down-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8150b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio1";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio2";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+};
+
+&slpi {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>, <52 4>;
+
+	sdc2_default_state: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc2_cmd";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc2_data";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	mdm2ap_default: mdm2ap-default-state {
+		pins = "gpio1", "gpio3";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ap2mdm_default: ap2mdm-default-state {
+		pins = "gpio56", "gpio57";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio77";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
+
+&uart12 {
+	status = "okay";
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l9a_1p2>;
+	vdda-pll-supply = <&vreg_l18a_0p9>;
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/Sony/edo/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
new file mode 100644
index 000000000..de6101dde
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm8250-xiaomi-elish-common.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro (BOE)";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+};
+
+&display_panel {
+	compatible = "xiaomi,elish-boe-nt36523", "novatek,nt36523";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
new file mode 100644
index 000000000..85e5cf3dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -0,0 +1,700 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+	classis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x10008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/*
+	 * Remaining regulators that are not yet supported:
+	 * OLEDB: 4925000-8100000
+	 * ab: 4600000-6100000
+	 * ibb: 800000-5400000
+	 */
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	qcom,master-dsi;
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+		vddio-supply = <&vreg_l14a_1p88>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				panel_in_0: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				panel_in_1: endpoint {
+					remote-endpoint = <&mdss_dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_0>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l9a_1p2>;
+	qcom,dual-dsi-mode;
+	qcom,sync-dual-dsi;
+	/* DSI1 is slave, so use DSI0 clocks */
+	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+	status = "okay";
+};
+
+&mdss_dsi1_out {
+	data-lanes = <0 1 2>;
+	remote-endpoint = <&panel_in_1>;
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l5a_0p88>;
+	phy-type = <PHY_TYPE_CPHY>;
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+};
+
+&usb_1 {
+	/* USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/xiaomi/elish/venus.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts
new file mode 100644
index 000000000..4cffe9c70
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-csot.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm8250-xiaomi-elish-common.dtsi"
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro (CSOT)";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+};
+
+&display_panel {
+	compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
new file mode 100644
index 000000000..1a98481d0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -0,0 +1,6585 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gcc-sm8250.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8250.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-aoncc.h>
+#include <dt-bindings/clock/qcom,sm8250-lpass-audiocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
+#include <dt-bindings/interconnect/qcom,sm8250.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/clock/qcom,camcc-sm8250.h>
+#include <dt-bindings/clock/qcom,videocc-sm8250.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c16;
+		i2c17 = &i2c17;
+		i2c18 = &i2c18;
+		i2c19 = &i2c19;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+		spi16 = &spi16;
+		spi17 = &spi17;
+		spi18 = &spi18;
+		spi19 = &spi19;
+	};
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-size = <0x400000>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <448>;
+			dynamic-power-coefficient = <105>;
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x20000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <379>;
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <379>;
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <379>;
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x40000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo485";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <444>;
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&epss_l3 MASTER_OSM_L3_APPS &epss_l3 SLAVE_OSM_L3>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3264>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp3: opp-518400000 {
+			opp-hz = /bits/ 64 <518400000>;
+			opp-peak-kBps = <800000 16588800>;
+		};
+
+		cpu0_opp4: opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-peak-kBps = <800000 16588800>;
+		};
+
+		cpu0_opp5: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <800000 19660800>;
+		};
+
+		cpu0_opp6: opp-787200000 {
+			opp-hz = /bits/ 64 <787200000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu0_opp7: opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-peak-kBps = <1804000 23347200>;
+		};
+
+		cpu0_opp8: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 26419200>;
+		};
+
+		cpu0_opp9: opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <1804000 29491200>;
+		};
+
+		cpu0_opp10: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <1804000 32563200>;
+		};
+
+		cpu0_opp11: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <1804000 36249600>;
+		};
+
+		cpu0_opp12: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <2188000 36249600>;
+		};
+
+		cpu0_opp13: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <2188000 39321600>;
+		};
+
+		cpu0_opp14: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 42393600>;
+		};
+
+		cpu0_opp15: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 42393600>;
+		};
+
+		cpu0_opp16: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <4068000 42393600>;
+		};
+
+		cpu0_opp17: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 42393600>;
+		};
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-710400000 {
+			opp-hz = /bits/ 64 <710400000>;
+			opp-peak-kBps = <1804000 19660800>;
+		};
+
+		cpu4_opp2: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 23347200>;
+		};
+
+		cpu4_opp3: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 26419200>;
+		};
+
+		cpu4_opp4: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 26419200>;
+		};
+
+		cpu4_opp5: opp-1171200000 {
+			opp-hz = /bits/ 64 <1171200000>;
+			opp-peak-kBps = <3072000 29491200>;
+		};
+
+		cpu4_opp6: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 29491200>;
+		};
+
+		cpu4_opp7: opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu4_opp8: opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu4_opp9: opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <5412000 39321600>;
+		};
+
+		cpu4_opp10: opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <5412000 42393600>;
+		};
+
+		cpu4_opp11: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <5412000 45465600>;
+		};
+
+		cpu4_opp12: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 45465600>;
+		};
+
+		cpu4_opp13: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+
+		cpu4_opp14: opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <7216000 48537600>;
+		};
+
+		cpu4_opp15: opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu4_opp16: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu4_opp17: opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu4_opp18: opp-2419200000 {
+			opp-hz = /bits/ 64 <2419200000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	cpu7_opp_table: opp-table-cpu7 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp1: opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <2188000 19660800>;
+		};
+
+		cpu7_opp2: opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-peak-kBps = <2188000 26419200>;
+		};
+
+		cpu7_opp3: opp-1075200000 {
+			opp-hz = /bits/ 64 <1075200000>;
+			opp-peak-kBps = <3072000 26419200>;
+		};
+
+		cpu7_opp4: opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <3072000 29491200>;
+		};
+
+		cpu7_opp5: opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu7_opp6: opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-peak-kBps = <4068000 32563200>;
+		};
+
+		cpu7_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 36249600>;
+		};
+
+		cpu7_opp8: opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <5412000 39321600>;
+		};
+
+		cpu7_opp9: opp-1747200000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <5412000 42393600>;
+		};
+
+		cpu7_opp10: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 45465600>;
+		};
+
+		cpu7_opp11: opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+
+		cpu7_opp12: opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-peak-kBps = <7216000 48537600>;
+		};
+
+		cpu7_opp13: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu7_opp14: opp-2265600000 {
+			opp-hz = /bits/ 64 <2265600000>;
+			opp-peak-kBps = <7216000 51609600>;
+		};
+
+		cpu7_opp15: opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp16: opp-2457600000 {
+			opp-hz = /bits/ 64 <2457600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp17: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp18: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp19: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+
+		cpu7_opp20: opp-2841600000 {
+			opp-hz = /bits/ 64 <2841600000>;
+			opp-peak-kBps = <8368000 51609600>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8250", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			reg = <0x0 0x80700000 0x0 0x160000>;
+			no-map;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		smem_mem: memory@80900000 {
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			no-map;
+		};
+
+		removed_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x5300000>;
+			no-map;
+		};
+
+		camera_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x500000>;
+			no-map;
+		};
+
+		wlan_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x100000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@86800000 {
+			reg = <0x0 0x86800000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@86810000 {
+			reg = <0x0 0x86810000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8681a000 {
+			reg = <0x0 0x8681a000 0x0 0x2000>;
+			no-map;
+		};
+
+		npu_mem: memory@86900000 {
+			reg = <0x0 0x86900000 0x0 0x500000>;
+			no-map;
+		};
+
+		video_mem: memory@86e00000 {
+			reg = <0x0 0x86e00000 0x0 0x500000>;
+			no-map;
+		};
+
+		cvp_mem: memory@87300000 {
+			reg = <0x0 0x87300000 0x0 0x500000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@87800000 {
+			reg = <0x0 0x87800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x1500000>;
+			no-map;
+		};
+
+		adsp_mem: memory@8a100000 {
+			reg = <0x0 0x8a100000 0x0 0x1d00000>;
+			no-map;
+		};
+
+		spss_mem: memory@8be00000 {
+			reg = <0x0 0x8be00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@8bf00000 {
+			reg = <0x0 0x8bf00000 0x0 0x4600000>;
+			no-map;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8250";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "bi_tcxo_ao",
+				      "sleep_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qfprom: efuse@784000 {
+			compatible = "qcom,sm8250-qfprom", "qcom,qfprom";
+			reg = <0 0x00784000 0 0x8ff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@19b {
+				reg = <0x19b 0x1>;
+				bits = <5 3>;
+			};
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x00793000 0 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x70000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x76 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x63 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00900000 0 0x70000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <15>;
+			dma-channel-mask = <0x7ff>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@988000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8250-gpi-dma", "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x70000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart12: serial@a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8250-config-noc";
+			reg = <0 0x01500000 0 0xa580>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sm8250-system-noc";
+			reg = <0 0x01620000 0 0x1c200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@163d000 {
+			compatible = "qcom,sm8250-mc-virt";
+			reg = <0 0x0163d000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8250-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1f180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8250-aggre2-noc";
+			reg = <0 0x01700000 0 0x33000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@1733000 {
+			compatible = "qcom,sm8250-compute-noc";
+			reg = <0 0x01733000 0 0xa180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8250-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8250";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_WIFI_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8250";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>,
+			      <0 0x01c0b000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e200 {
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		pcie2: pci@1c10000 {
+			compatible = "qcom,pcie-sm8250";
+			reg = <0 0x01c10000 0 0x3000>,
+			      <0 0x64000000 0 0xf1d>,
+			      <0 0x64000f20 0 0xa8>,
+			      <0 0x64001000 0 0x1000>,
+			      <0 0x64100000 0 0x100000>,
+			      <0 0x01c13000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+				 <&gcc GCC_PCIE_2_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ref",
+				      "tbu",
+				      "ddrss_sf_tbu";
+
+			assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			iommu-map = <0x0   &apps_smmu 0x1d00 0x1>,
+				    <0x100 &apps_smmu 0x1d01 0x1>;
+
+			resets = <&gcc GCC_PCIE_2_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_2_GDSC>;
+
+			phys = <&pcie2_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie2_default_state>;
+			dma-coherent;
+
+			status = "disabled";
+		};
+
+		pcie2_phy: phy@1c16000 {
+			compatible = "qcom,sm8250-qmp-modem-pcie-phy";
+			reg = <0 0x01c16000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_MDM_CLKREF_EN>,
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie2_lane: phy@1c16200 {
+				reg = <0 0x01c16200 0 0x170>, /* tx0 */
+				      <0 0x01c16400 0 0x200>, /* rx0 */
+				      <0 0x01c16a00 0 0x1f0>, /* pcs */
+				      <0 0x01c16600 0 0x170>, /* tx1 */
+				      <0 0x01c16800 0 0x200>, /* rx1 */
+				      <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#phy-cells = <0>;
+
+				#clock-cells = <0>;
+				clock-output-names = "pcie_2_pipe_clk";
+			};
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0x0e0 0>, <&apps_smmu 0x4e0 0>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8250-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x16c>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x16c>,
+				      <0 0x01d87a00 0 0x200>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <8>;
+			qcom,num-ees = <2>;
+			iommus = <&apps_smmu 0x592 0x0000>,
+				 <&apps_smmu 0x598 0x0000>,
+				 <&apps_smmu 0x599 0x0000>,
+				 <&apps_smmu 0x59f 0x0000>,
+				 <&apps_smmu 0x586 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8250-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x592 0x0000>,
+				 <&apps_smmu 0x598 0x0000>,
+				 <&apps_smmu 0x599 0x0000>,
+				 <&apps_smmu 0x59f 0x0000>,
+				 <&apps_smmu 0x586 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "memory";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8250-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
+				 <&audiocc LPASS_CDC_WSA_NPL>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&aoncc LPASS_CDC_VA_MCLK>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+
+			status = "disabled";
+		};
+
+		swr0: soundwire-controller@3250000 {
+			reg = <0 0x03250000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		audiocc: clock-controller@3300000 {
+			compatible = "qcom,sm8250-lpass-audiocc";
+			reg = <0 0x03300000 0 0x30000>;
+			#clock-cells = <1>;
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio", "bus";
+		};
+
+		vamacro: codec@3370000 {
+			compatible = "qcom,sm8250-lpass-va-macro";
+			reg = <0 0x03370000 0 0x1000>;
+			clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			clock-names = "mclk", "macro", "dcodec";
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		rxmacro: rxmacro@3200000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			compatible = "qcom,sm8250-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+			status = "disabled";
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			reg = <0 0x03210000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			status = "disabled";
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		txmacro: txmacro@3220000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			compatible = "qcom,sm8250-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+			status = "disabled";
+
+			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		/* tx macro */
+		swr2: soundwire-controller@3230000 {
+			reg = <0 0x03230000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core";
+			status = "disabled";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <5>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0xff 0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0xff 0x01 0x00 0x02 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x00 0x00 0x00>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0x00 0x01 0x00 0x01>;
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		aoncc: clock-controller@3380000 {
+			compatible = "qcom,sm8250-lpass-aoncc";
+			reg = <0 0x03380000 0 0x40000>;
+			#clock-cells = <1>;
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio", "bus";
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+			reg = <0 0x033c0000 0x0 0x20000>,
+			      <0 0x03550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 14>;
+
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa_swr_sleep: wsa-swr-sleep-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			dmic01_active: dmic01-active-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+				};
+			};
+
+			dmic01_sleep: dmic01-sleep-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_sleep: tx-swr-sleep-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				data1-pins {
+					pins = "gpio1";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data2-pins {
+					pins = "gpio2";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-650.2",
+				     "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-670000000 {
+					opp-hz = /bits/ 64 <670000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-supported-hw = <0xa>;
+				};
+
+				opp-587000000 {
+					opp-hz = /bits/ 64 <587000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-supported-hw = <0xb>;
+				};
+
+				opp-525000000 {
+					opp-hz = /bits/ 64 <525000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-490000000 {
+					opp-hz = /bits/ 64 <490000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-441600000 {
+					opp-hz = /bits/ 64 <441600000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-supported-hw = <0xf>;
+				};
+
+				opp-305000000 {
+					opp-hz = /bits/ 64 <305000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-supported-hw = <0xf>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x30000>,
+			      <0 0x3de0000 0 0x10000>,
+			      <0 0xb290000 0 0x10000>,
+			      <0 0xb490000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			status = "disabled";
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8250-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8250-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc GPU_CC_AHB_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8250-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		stm@6002000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x06002000 0 0x1000>, <0 0x16280000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					stm_out: endpoint {
+						remote-endpoint = <&funnel0_in7>;
+					};
+				};
+			};
+		};
+
+		tpda@6004000 {
+			compatible = "qcom,coresight-tpda", "arm,primecell";
+			reg = <0 0x06004000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tpda_out_funnel_qatb: endpoint {
+						remote-endpoint = <&funnel_qatb_in_tpda>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@9 {
+					reg = <9>;
+					tpda_9_in_tpdm_mm: endpoint {
+						remote-endpoint = <&tpdm_mm_out_tpda9>;
+					};
+				};
+
+				port@17 {
+					reg = <23>;
+					tpda_23_in_tpdm_prng: endpoint {
+						remote-endpoint = <&tpdm_prng_out_tpda_23>;
+					};
+				};
+			};
+		};
+
+		funnel@6005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06005000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_qatb_out_funnel_in0: endpoint {
+						remote-endpoint = <&funnel_in0_in_funnel_qatb>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_qatb_in_tpda: endpoint {
+						remote-endpoint = <&tpda_out_funnel_qatb>;
+					};
+				};
+			};
+		};
+
+		funnel@6041000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06041000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_in0_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@6 {
+					reg = <6>;
+					funnel_in0_in_funnel_qatb: endpoint {
+						remote-endpoint = <&funnel_qatb_out_funnel_in0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					funnel0_in7: endpoint {
+						remote-endpoint = <&stm_out>;
+					};
+				};
+			};
+		};
+
+		funnel@6042000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06042000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_in1_out_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_in_funnel_in1>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@4 {
+					reg = <4>;
+					funnel_in1_in_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_out_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		funnel@6045000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06045000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_merg_out_funnel_swao: endpoint {
+					remote-endpoint = <&funnel_swao_in_funnel_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_merg_in_funnel_in0: endpoint {
+					remote-endpoint = <&funnel_in0_out_funnel_merg>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_merg_in_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_out_funnel_merg>;
+					};
+				};
+			};
+		};
+
+		replicator@6046000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06046000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_out: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_cx_in_swao_out: endpoint {
+						remote-endpoint = <&replicator_swao_out_cx_in>;
+					};
+				};
+			};
+		};
+
+		etr@6048000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06048000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,scatter-gather;
+
+			in-ports {
+				port {
+					etr_in: endpoint {
+						remote-endpoint = <&replicator_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@684c000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0 0x0684c000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_prng_out_tpda_23: endpoint {
+						remote-endpoint = <&tpda_23_in_tpdm_prng>;
+					};
+				};
+			};
+		};
+
+		funnel@6b04000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			arm,primecell-periphid = <0x000bb908>;
+
+			reg = <0 0x06b04000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_swao_out_etf: endpoint {
+						remote-endpoint = <&etf_in_funnel_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@7 {
+					reg = <7>;
+					funnel_swao_in_funnel_merg: endpoint {
+						remote-endpoint = <&funnel_merg_out_funnel_swao>;
+					};
+				};
+			};
+		};
+
+		etf@6b05000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x06b05000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_out: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in_funnel_swao_out: endpoint {
+						remote-endpoint = <&funnel_swao_out_etf>;
+					};
+				};
+			};
+		};
+
+		replicator@6b06000 {
+			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+			reg = <0 0x06b06000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					replicator_swao_out_cx_in: endpoint {
+						remote-endpoint = <&replicator_cx_in_swao_out>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					replicator_in: endpoint {
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		tpdm@6c08000 {
+			compatible = "qcom,coresight-tpdm", "arm,primecell";
+			reg = <0 0x06c08000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					tpdm_mm_out_funnel_dl_mm: endpoint {
+						remote-endpoint = <&funnel_dl_mm_in_tpdm_mm>;
+					};
+				};
+			};
+		};
+
+		funnel@6c0b000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06c0b000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_dl_mm_out_funnel_dl_center: endpoint {
+					remote-endpoint = <&funnel_dl_center_in_funnel_dl_mm>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@3 {
+					reg = <3>;
+					funnel_dl_mm_in_tpdm_mm: endpoint {
+						remote-endpoint = <&tpdm_mm_out_funnel_dl_mm>;
+					};
+				};
+			};
+		};
+
+		funnel@6c2d000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x06c2d000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port {
+					tpdm_mm_out_tpda9: endpoint {
+						remote-endpoint = <&tpda_9_in_tpdm_mm>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					reg = <2>;
+					funnel_dl_center_in_funnel_dl_mm: endpoint {
+					remote-endpoint = <&funnel_dl_mm_out_funnel_dl_center>;
+					};
+				};
+			};
+		};
+
+		etm@7040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07040000 0 0x1000>;
+
+			cpu = <&CPU0>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint = <&apss_funnel_in0>;
+					};
+				};
+			};
+		};
+
+		etm@7140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07140000 0 0x1000>;
+
+			cpu = <&CPU1>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint = <&apss_funnel_in1>;
+					};
+				};
+			};
+		};
+
+		etm@7240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07240000 0 0x1000>;
+
+			cpu = <&CPU2>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint = <&apss_funnel_in2>;
+					};
+				};
+			};
+		};
+
+		etm@7340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07340000 0 0x1000>;
+
+			cpu = <&CPU3>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint = <&apss_funnel_in3>;
+					};
+				};
+			};
+		};
+
+		etm@7440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07440000 0 0x1000>;
+
+			cpu = <&CPU4>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint = <&apss_funnel_in4>;
+					};
+				};
+			};
+		};
+
+		etm@7540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07540000 0 0x1000>;
+
+			cpu = <&CPU5>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint = <&apss_funnel_in5>;
+					};
+				};
+			};
+		};
+
+		etm@7640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07640000 0 0x1000>;
+
+			cpu = <&CPU6>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint = <&apss_funnel_in6>;
+					};
+				};
+			};
+		};
+
+		etm@7740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x07740000 0 0x1000>;
+
+			cpu = <&CPU7>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint = <&apss_funnel_in7>;
+					};
+				};
+			};
+		};
+
+		funnel@7800000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07800000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_apss_out_funnel_apss_merg: endpoint {
+					remote-endpoint = <&funnel_apss_merg_in_funnel_apss>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					apss_funnel_in0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					apss_funnel_in1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					apss_funnel_in2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					apss_funnel_in3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					apss_funnel_in4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					apss_funnel_in5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					apss_funnel_in6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					apss_funnel_in7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		funnel@7810000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x07810000 0 0x1000>;
+
+			clocks = <&aoss_qmp>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_apss_merg_out_funnel_in1: endpoint {
+					remote-endpoint = <&funnel_in1_in_funnel_apss_merg>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_apss_merg_in_funnel_apss: endpoint {
+					remote-endpoint = <&funnel_apss_out_funnel_apss_merg>;
+					};
+				};
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8250-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1001 0x0460>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1002 0x0460>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x0460>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x0460>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x0460>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x0460>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x0460>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1008 0x0460>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8250-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sm8250-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8250-qmp-usb3-dp-phy";
+			reg = <0 0x088e9000 0 0x200>,
+			      <0 0x088e8000 0 0x40>,
+			      <0 0x088ea000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: usb3-phy@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x400>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+			};
+		};
+
+		usb_2_qmpphy: phy@88eb000 {
+			compatible = "qcom,sm8250-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88eb200 {
+				reg = <0 0x088eb200 0 0x200>,
+				      <0 0x088eb400 0 0x200>,
+				      <0 0x088eb800 0 0x800>;
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		pmu@9091000 {
+			compatible = "qcom,sm8250-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x09091000 0 0x1000>;
+
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI_CH0 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-800000 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1200000 {
+					opp-peak-kBps = <(300 * 4 * 1000)>;
+				};
+
+				opp-1804000 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-2188000 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-2724000 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-3072000 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				opp-4068000 {
+					opp-peak-kBps = <(1017 * 4 * 1000)>;
+				};
+
+				/* 1353 MHz, LPDDR4X */
+
+				opp-6220000 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-7216000 {
+					opp-peak-kBps = <(1804 * 4 * 1000)>;
+				};
+
+				opp-8368000 {
+					opp-peak-kBps = <(2092 * 4 * 1000)>;
+				};
+
+				/* LPDDR5 */
+				opp-10944000 {
+					opp-peak-kBps = <(2736 * 4 * 1000)>;
+				};
+			};
+		};
+
+		pmu@90b6400 {
+			compatible = "qcom,sm8250-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x090b6400 0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_AMPSS_M0 3 &gem_noc SLAVE_LLCC 3>;
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-800000 {
+					opp-peak-kBps = <(200 * 4 * 1000)>;
+				};
+
+				opp-1804000 {
+					opp-peak-kBps = <(451 * 4 * 1000)>;
+				};
+
+				opp-2188000 {
+					opp-peak-kBps = <(547 * 4 * 1000)>;
+				};
+
+				opp-2724000 {
+					opp-peak-kBps = <(681 * 4 * 1000)>;
+				};
+
+				opp-3072000 {
+					opp-peak-kBps = <(768 * 4 * 1000)>;
+				};
+
+				/* 1017MHz, 1353 MHz, LPDDR4X */
+
+				opp-6220000 {
+					opp-peak-kBps = <(1555 * 4 * 1000)>;
+				};
+
+				opp-6832000 {
+					opp-peak-kBps = <(1708 * 4 * 1000)>;
+				};
+
+				opp-8368000 {
+					opp-peak-kBps = <(2092 * 4 * 1000)>;
+				};
+
+				/* 2133MHz, LPDDR4X */
+
+				/* LPDDR5 */
+				opp-10944000 {
+					opp-peak-kBps = <(2736 * 4 * 1000)>;
+				};
+
+				/* LPDDR5 */
+				opp-12784000 {
+					opp-peak-kBps = <(3196 * 4 * 1000)>;
+				};
+			};
+		};
+
+		dc_noc: interconnect@90c0000 {
+			compatible = "qcom,sm8250-dc-noc";
+			reg = <0 0x090c0000 0 0x4200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,sm8250-gem-noc";
+			reg = <0 0x09100000 0 0xb4000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sm8250-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8250-llcc";
+			reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+			      <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+			      <0 0x09600000 0 0x50000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sm8250-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sm8250-venus";
+			reg = <0 0x0aa00000 0 0x100000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc MVS0C_GDSC>,
+					<&videocc MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MX>;
+			power-domain-names = "venus", "vcodec0", "mx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface", "core", "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_VENUS_CFG 0>,
+					<&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "cpu-cfg", "video-mem";
+
+			iommus = <&apps_smmu 0x2100 0x0400>;
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+			reset-names = "bus", "core";
+
+			status = "disabled";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-720000000 {
+					opp-hz = /bits/ 64 <720000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-1014000000 {
+					opp-hz = /bits/ 64 <1014000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-1098000000 {
+					opp-hz = /bits/ 64 <1098000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-1332000000 {
+					opp-hz = /bits/ 64 <1332000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
+		videocc: clock-controller@abf0000 {
+			compatible = "qcom,sm8250-videocc";
+			reg = <0 0x0abf0000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac4f000 {
+			compatible = "qcom,sm8250-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac4f000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			pinctrl-0 = <&cci0_default>;
+			pinctrl-1 = <&cci0_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac50000 {
+			compatible = "qcom,sm8250-cci", "qcom,msm8996-cci";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			reg = <0 0x0ac50000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			pinctrl-0 = <&cci1_default>;
+			pinctrl-1 = <&cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: camss@ac6a000 {
+			compatible = "qcom,sm8250-camss";
+			status = "disabled";
+
+			reg = <0 0x0ac6a000 0 0x2000>,
+			      <0 0x0ac6c000 0 0x2000>,
+			      <0 0x0ac6e000 0 0x1000>,
+			      <0 0x0ac70000 0 0x1000>,
+			      <0 0x0ac72000 0 0x1000>,
+			      <0 0x0ac74000 0 0x1000>,
+			      <0 0x0acb4000 0 0xd000>,
+			      <0 0x0acc3000 0 0xd000>,
+			      <0 0x0acd9000 0 0x2200>,
+			      <0 0x0acdb200 0 0x2200>;
+			reg-names = "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4",
+				    "csiphy5",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite0",
+				    "vfe_lite1";
+
+			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "csiphy5",
+					  "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			power-domains = <&camcc IFE_0_GDSC>,
+					<&camcc IFE_1_GDSC>,
+					<&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY5_CLK>,
+				 <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_IFE_0_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_0_AREG_CLK>,
+				 <&camcc CAM_CC_IFE_1_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_AREG_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+			clock-names = "cam_ahb_clk",
+				      "cam_hf_axi",
+				      "cam_sf_axi",
+				      "camnoc_axi",
+				      "camnoc_axi_src",
+				      "core_ahb",
+				      "cpas_ahb",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "csiphy5",
+				      "csiphy5_timer",
+				      "slow_ahb_src",
+				      "vfe0_ahb",
+				      "vfe0_axi",
+				      "vfe0",
+				      "vfe0_cphy_rx",
+				      "vfe0_csid",
+				      "vfe0_areg",
+				      "vfe1_ahb",
+				      "vfe1_axi",
+				      "vfe1",
+				      "vfe1_cphy_rx",
+				      "vfe1_csid",
+				      "vfe1_areg",
+				      "vfe_lite_ahb",
+				      "vfe_lite_axi",
+				      "vfe_lite",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			iommus = <&apps_smmu 0x800 0x400>,
+				 <&apps_smmu 0x801 0x400>,
+				 <&apps_smmu 0x840 0x400>,
+				 <&apps_smmu 0x841 0x400>,
+				 <&apps_smmu 0xc00 0x400>,
+				 <&apps_smmu 0xc01 0x400>,
+				 <&apps_smmu 0xc40 0x400>,
+				 <&apps_smmu 0xc41 0x400>;
+
+			interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_CAMERA_CFG 0>,
+					<&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "cam_ahb",
+					     "cam_hf_0_mnoc",
+					     "cam_sf_0_mnoc",
+					     "cam_sf_icp_mnoc";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+
+				port@5 {
+					reg = <5>;
+				};
+			};
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm8250-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			status = "disabled";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8250-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "nrt_bus", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x820 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8250-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8250-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8250-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-7nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8250-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8250-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8250-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <9>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x0001100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x0100000>,
+			      <0x0 0x0e700000 0x0 0x00a0000>,
+			      <0x0 0x0c40a000 0x0 0x0026000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8250-pinctrl";
+			reg = <0 0x0f100000 0 0x300000>,
+			      <0 0x0f500000 0 0x300000>,
+			      <0 0x0f900000 0 0x300000>;
+			reg-names = "west", "south", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 181>;
+			wakeup-parent = <&pdc>;
+
+			cam2_default: cam2-default-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			cam2_suspend: cam2-suspend-state {
+				rst-pins {
+					pins = "gpio78";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+
+				mclk-pins {
+					pins = "gpio96";
+					function = "cam_mclk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				cci0_i2c0_default: cci0-i2c0-default-pins {
+					/* SDA, SCL */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci0_i2c1_default: cci0-i2c1-default-pins {
+					/* SDA, SCL */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				cci0_i2c0_sleep: cci0-i2c0-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio101", "gpio102";
+					function = "cci_i2c";
+
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+
+				cci0_i2c1_sleep: cci0-i2c1-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio103", "gpio104";
+					function = "cci_i2c";
+
+					drive-strength = <2>; /* 2 mA */
+					bias-pull-down;
+				};
+			};
+
+			cci1_default: cci1-default-state {
+				cci1_i2c0_default: cci1-i2c0-default-pins {
+					/* SDA, SCL */
+					pins = "gpio105","gpio106";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci1_i2c1_default: cci1-i2c1-default-pins {
+					/* SDA, SCL */
+					pins = "gpio107","gpio108";
+					function = "cci_i2c";
+
+					bias-pull-up;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				cci1_i2c0_sleep: cci1-i2c0-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio105","gpio106";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+
+				cci1_i2c1_sleep: cci1-i2c1-sleep-pins {
+					/* SDA, SCL */
+					pins = "gpio107","gpio108";
+					function = "cci_i2c";
+
+					bias-pull-down;
+					drive-strength = <2>; /* 2 mA */
+				};
+			};
+
+			pri_mi2s_active: pri-mi2s-active-state {
+				sclk-pins {
+					pins = "gpio138";
+					function = "mi2s0_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				ws-pins {
+					pins = "gpio141";
+					function = "mi2s0_ws";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data0-pins {
+					pins = "gpio139";
+					function = "mi2s0_data0";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				data1-pins {
+					pins = "gpio140";
+					function = "mi2s0_data1";
+					drive-strength = <8>;
+					output-high;
+				};
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio115", "gpio116";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio119", "gpio120";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio16", "gpio17";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio125", "gpio126";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio129", "gpio130";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c18_default: qup-i2c18-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio31";
+				function = "qup0";
+			};
+
+			qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
+				pins = "gpio31";
+				function = "gpio";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio28", "gpio29",
+				       "gpio30";
+				function = "qup0";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup1";
+			};
+
+			qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
+				pins = "gpio7";
+				function = "gpio";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio4", "gpio5",
+				       "gpio6";
+				function = "qup1";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio118";
+				function = "qup2";
+			};
+
+			qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+				pins = "gpio118";
+				function = "gpio";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio115", "gpio116",
+				       "gpio117";
+				function = "qup2";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio122";
+				function = "qup3";
+			};
+
+			qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
+				pins = "gpio122";
+				function = "gpio";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio119", "gpio120",
+				       "gpio121";
+				function = "qup3";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio11";
+				function = "qup4";
+			};
+
+			qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+				pins = "gpio11";
+				function = "gpio";
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio8", "gpio9",
+				       "gpio10";
+				function = "qup4";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio15";
+				function = "qup5";
+			};
+
+			qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
+				pins = "gpio15";
+				function = "gpio";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio12", "gpio13",
+				       "gpio14";
+				function = "qup5";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio19";
+				function = "qup6";
+			};
+
+			qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+				pins = "gpio19";
+				function = "gpio";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio16", "gpio17",
+				       "gpio18";
+				function = "qup6";
+			};
+
+			qup_spi7_cs: qup-spi7-cs-state {
+				pins = "gpio23";
+				function = "qup7";
+			};
+
+			qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+				pins = "gpio23";
+				function = "gpio";
+			};
+
+			qup_spi7_data_clk: qup-spi7-data-clk-state {
+				pins = "gpio20", "gpio21",
+				       "gpio22";
+				function = "qup7";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio27";
+				function = "qup8";
+			};
+
+			qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
+				pins = "gpio27";
+				function = "gpio";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio24", "gpio25",
+				       "gpio26";
+				function = "qup8";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio128";
+				function = "qup9";
+			};
+
+			qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
+				pins = "gpio128";
+				function = "gpio";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio125", "gpio126",
+				       "gpio127";
+				function = "qup9";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio132";
+				function = "qup10";
+			};
+
+			qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
+				pins = "gpio132";
+				function = "gpio";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio129", "gpio130",
+				       "gpio131";
+				function = "qup10";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio63";
+				function = "qup11";
+			};
+
+			qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+				pins = "gpio63";
+				function = "gpio";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio60", "gpio61",
+				       "gpio62";
+				function = "qup11";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio35";
+				function = "qup12";
+			};
+
+			qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
+				pins = "gpio35";
+				function = "gpio";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio32", "gpio33",
+				       "gpio34";
+				function = "qup12";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio39";
+				function = "qup13";
+			};
+
+			qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
+				pins = "gpio39";
+				function = "gpio";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio36", "gpio37",
+				       "gpio38";
+				function = "qup13";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio43";
+				function = "qup14";
+			};
+
+			qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
+				pins = "gpio43";
+				function = "gpio";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio40", "gpio41",
+				       "gpio42";
+				function = "qup14";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio47";
+				function = "qup15";
+			};
+
+			qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
+				pins = "gpio47";
+				function = "gpio";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio44", "gpio45",
+				       "gpio46";
+				function = "qup15";
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio51";
+				function = "qup16";
+			};
+
+			qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
+				pins = "gpio51";
+				function = "gpio";
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio48", "gpio49",
+				       "gpio50";
+				function = "qup16";
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio55";
+				function = "qup17";
+			};
+
+			qup_spi17_cs_gpio: qup-spi17-cs-gpio-state {
+				pins = "gpio55";
+				function = "gpio";
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				pins = "gpio52", "gpio53",
+				       "gpio54";
+				function = "qup17";
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio59";
+				function = "qup18";
+			};
+
+			qup_spi18_cs_gpio: qup-spi18-cs-gpio-state {
+				pins = "gpio59";
+				function = "gpio";
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				pins = "gpio56", "gpio57",
+				       "gpio58";
+				function = "qup18";
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio3";
+				function = "qup19";
+			};
+
+			qup_spi19_cs_gpio: qup-spi19-cs-gpio-state {
+				pins = "gpio3";
+				function = "gpio";
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				pins = "gpio0", "gpio1",
+				       "gpio2";
+				function = "qup19";
+			};
+
+			qup_uart2_default: qup-uart2-default-state {
+				pins = "gpio117", "gpio118";
+				function = "qup2";
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio16", "gpio17", "gpio18", "gpio19";
+				function = "qup6";
+			};
+
+			qup_uart12_default: qup-uart12-default-state {
+				pins = "gpio34", "gpio35";
+				function = "qup12";
+			};
+
+			qup_uart17_default: qup-uart17-default-state {
+				pins = "gpio52", "gpio53", "gpio54", "gpio55";
+				function = "qup17";
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio58", "gpio59";
+				function = "qup18";
+			};
+
+			tert_mi2s_active: tert-mi2s-active-state {
+				sck-pins {
+					pins = "gpio133";
+					function = "mi2s2_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				data0-pins {
+					pins = "gpio134";
+					function = "mi2s2_data0";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				ws-pins {
+					pins = "gpio135";
+					function = "mi2s2_ws";
+					drive-strength = <8>;
+					output-high;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio79";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio80";
+					function = "pci_e0";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio81";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio82";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio83";
+					function = "pci_e1";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio84";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie2_default_state: pcie2-default-state {
+				perst-pins {
+					pins = "gpio85";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio86";
+					function = "pci_e2";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio87";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8250-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+		};
+
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8250-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		timer@17c20000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8250-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sm8250-epss-l3", "qcom,epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#interconnect-cells = <1>;
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8250-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
new file mode 100644
index 000000000..4013d25a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -0,0 +1,870 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020-2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8350 HDK";
+	compatible = "qcom,sm8350-hdk", "qcom,sm8350";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lt9611_1v2: lt9611-1v2-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		vin-supply = <&vph_pwr>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	lt9611_3v3: lt9611-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vreg_bob>;
+		gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/cdsp.mbn";
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_phy  {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8350/a660_zap.mbn";
+	};
+};
+
+&i2c13 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 50 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_state>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp0_out: endpoint {
+				data-lanes = <0 1>;
+				remote-endpoint = <&usb_1_qmpphy_dp_in>;
+			};
+		};
+	};
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/modem.mbn";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+
+	gpio-line-names =
+		"APPS_I2C_SDA", /* GPIO_0 */
+		"APPS_I2C_SCL",
+		"FSA_INT_N",
+		"USER_LED3_EN",
+		"SMBUS_SDA_1P8",
+		"SMBUS_SCL_1P8",
+		"2M2_3P3_EN",
+		"ALERT_DUAL_M2_N",
+		"EXP_UART_CTS",
+		"EXP_UART_RFR",
+		"EXP_UART_TX", /* GPIO_10 */
+		"EXP_UART_RX",
+		"NC",
+		"NC",
+		"RCM_MARKER1",
+		"WSA0_EN",
+		"CAM1_RESET_N",
+		"CAM0_RESET_N",
+		"DEBUG_UART_TX",
+		"DEBUG_UART_RX",
+		"TS_I2C_SDA", /* GPIO_20 */
+		"TS_I2C_SCL",
+		"TS_RESET_N",
+		"TS_INT_N",
+		"DISP0_RESET_N",
+		"DISP1_RESET_N",
+		"ETH_RESET",
+		"RCM_MARKER2",
+		"CAM_DC_MIPI_MUX_EN",
+		"CAM_DC_MIPI_MUX_SEL",
+		"AFC_PHY_TA_D_PLUS", /* GPIO_30 */
+		"AFC_PHY_TA_D_MINUS",
+		"PM8008_1_IRQ",
+		"PM8008_1_RESET_N",
+		"PM8008_2_IRQ",
+		"PM8008_2_RESET_N",
+		"CAM_DC_I3C_SDA",
+		"CAM_DC_I3C_SCL",
+		"FP_INT_N",
+		"FP_WUHB_INT_N",
+		"SMB_SPMI_DATA", /* GPIO_40 */
+		"SMB_SPMI_CLK",
+		"USB_HUB_RESET",
+		"FORCE_USB_BOOT",
+		"LRF_IRQ",
+		"NC",
+		"IMU2_INT",
+		"HDMI_3P3_EN",
+		"HDMI_RSTN",
+		"HDMI_1P2_EN",
+		"HDMI_INT", /* GPIO_50 */
+		"USB1_ID",
+		"FP_SPI_MISO",
+		"FP_SPI_MOSI",
+		"FP_SPI_CLK",
+		"FP_SPI_CS_N",
+		"NFC_ESE_SPI_MISO",
+		"NFC_ESE_SPI_MOSI",
+		"NFC_ESE_SPI_CLK",
+		"NFC_ESE_SPI_CS",
+		"NFC_I2C_SDA", /* GPIO_60 */
+		"NFC_I2C_SCLC",
+		"NFC_EN",
+		"NFC_CLK_REQ",
+		"HST_WLAN_EN",
+		"HST_BT_EN",
+		"HST_SW_CTRL",
+		"NC",
+		"HST_BT_UART_CTS",
+		"HST_BT_UART_RFR",
+		"HST_BT_UART_TX", /* GPIO_70 */
+		"HST_BT_UART_RX",
+		"CAM_DC_SPI0_MISO",
+		"CAM_DC_SPI0_MOSI",
+		"CAM_DC_SPI0_CLK",
+		"CAM_DC_SPI0_CS_N",
+		"CAM_DC_SPI1_MISO",
+		"CAM_DC_SPI1_MOSI",
+		"CAM_DC_SPI1_CLK",
+		"CAM_DC_SPI1_CS_N",
+		"HALL_INT_N", /* GPIO_80 */
+		"USB_PHY_PS",
+		"MDP_VSYNC_P",
+		"MDP_VSYNC_S",
+		"ETH_3P3_EN",
+		"RADAR_INT",
+		"NFC_DWL_REQ",
+		"SM_GPIO_87",
+		"WCD_RESET_N",
+		"ALSP_INT_N",
+		"PRESS_INT", /* GPIO_90 */
+		"SAR_INT_N",
+		"SD_CARD_DET_N",
+		"NC",
+		"PCIE0_RESET_N",
+		"PCIE0_CLK_REQ_N",
+		"PCIE0_WAKE_N",
+		"PCIE1_RESET_N",
+		"PCIE1_CLK_REQ_N",
+		"PCIE1_WAKE_N",
+		"CAM_MCLK0", /* GPIO_100 */
+		"CAM_MCLK1",
+		"CAM_MCLK2",
+		"CAM_MCLK3",
+		"CAM_MCLK4",
+		"CAM_MCLK5",
+		"CAM2_RESET_N",
+		"CCI_I2C0_SDA",
+		"CCI_I2C0_SCL",
+		"CCI_I2C1_SDA",
+		"CCI_I2C1_SCL", /* GPIO_110 */
+		"CCI_I2C2_SDA",
+		"CCI_I2C2_SCL",
+		"CCI_I2C3_SDA",
+		"CCI_I2C3_SCL",
+		"CAM5_RESET_N",
+		"CAM4_RESET_N",
+		"CAM3_RESET_N",
+		"IMU1_INT",
+		"MAG_INT_N",
+		"MI2S2_I2S_SCK", /* GPIO_120 */
+		"MI2S2_I2S_DAT0",
+		"MI2S2_I2S_WS",
+		"HIFI_DAC_I2S_MCLK",
+		"MI2S2_I2S_DAT1",
+		"HIFI_DAC_I2S_SCK",
+		"HIFI_DAC_I2S_DAT0",
+		"NC",
+		"HIFI_DAC_I2S_WS",
+		"HST_BT_WLAN_SLIMBUS_CLK",
+		"HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+		"BT_LED_EN",
+		"WLAN_LED_EN",
+		"NC",
+		"NC",
+		"NC",
+		"UIM2_PRESENT",
+		"NC",
+		"NC",
+		"NC",
+		"UIM1_PRESENT", /* GPIO_140 */
+		"NC",
+		"SM_RFFE0_DATA",
+		"NC",
+		"SM_RFFE1_DATA",
+		"SM_MSS_GRFC4",
+		"SM_MSS_GRFC5",
+		"SM_MSS_GRFC6",
+		"SM_MSS_GRFC7",
+		"SM_RFFE4_CLK",
+		"SM_RFFE4_DATA", /* GPIO_150 */
+		"WLAN_COEX_UART1_RX",
+		"WLAN_COEX_UART1_TX",
+		"HST_SW_CTRL",
+		"DSI0_STATUS",
+		"DSI1_STATUS",
+		"APPS_PBL_BOOT_SPEED_1",
+		"APPS_BOOT_FROM_ROM",
+		"APPS_PBL_BOOT_SPEED_0",
+		"QLINK0_REQ",
+		"QLINK0_EN", /* GPIO_160 */
+		"QLINK0_WMSS_RESET_N",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WCD_SWR_TX_CLK",
+		"WCD_SWR_TX_DATA0",
+		"WCD_SWR_TX_DATA1", /* GPIO_170 */
+		"WCD_SWR_RX_CLK",
+		"WCD_SWR_RX_DATA0",
+		"WCD_SWR_RX_DATA1",
+		"DMIC01_CLK",
+		"DMIC01_DATA",
+		"DMIC23_CLK",
+		"DMIC23_DATA",
+		"WSA_SWR_CLK",
+		"WSA_SWR_DATA",
+		"DMIC45_CLK", /* GPIO_180 */
+		"DMIC45_DATA",
+		"WCD_SWR_TX_DATA2",
+		"SENSOR_I3C_SDA",
+		"SENSOR_I3C_SCL",
+		"CAM_OIS0_I3C_SDA",
+		"CAM_OIS0_I3C_SCL",
+		"IMU_SPI_MISO",
+		"IMU_SPI_MOSI",
+		"IMU_SPI_CLK",
+		"IMU_SPI_CS_N", /* GPIO_190 */
+		"MAG_I2C_SDA",
+		"MAG_I2C_SCL",
+		"SENSOR_I2C_SDA",
+		"SENSOR_I2C_SCL",
+		"RADAR_SPI_MISO",
+		"RADAR_SPI_MOSI",
+		"RADAR_SPI_CLK",
+		"RADAR_SPI_CS_N",
+		"HST_BLE_UART_TX",
+		"HST_BLE_UART_RX", /* GPIO_200 */
+		"HST_WLAN_UART_TX",
+		"HST_WLAN_UART_RX";
+
+	pcie0_default_state: pcie0-default-state {
+		perst-pins {
+			pins = "gpio94";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio95";
+			function = "pcie0_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio96";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		perst-pins {
+			pins = "gpio97";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		clkreq-pins {
+			pins = "gpio98";
+			function = "pcie1_clkreqn";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_enabled_state>;
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
+
+/* PINCTRL - additions to nodes defined in sm8350.dtsi */
+
+&tlmm {
+	usb_hub_enabled_state: usb-hub-enabled-state {
+		pins = "gpio42";
+		function = "gpio";
+
+		drive-strength = <2>;
+		output-low;
+	};
+
+	lt9611_state: lt9611-state {
+		rst-pins {
+			pins = "gpio48";
+			function = "gpio";
+
+			output-high;
+			input-disable;
+		};
+
+		irq-pins {
+			pins = "gpio50";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
new file mode 100644
index 000000000..3bd5e57cb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2021, Microsoft Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Microsoft Surface Duo 2";
+	compatible = "microsoft,surface-duo2", "qcom,sm8350";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+		vdd-l8-supply = <&vreg_s2c_0p8>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_uim1: ldo4 {
+			regulator-name = "vreg_l4c_uim1";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_uim2: ldo5 {
+			regulator-name = "vreg_l5c_uim2";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p96: ldo11 {
+			regulator-name = "vreg_l11c_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/cdsp.mbn";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/modem.mbn";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/microsoft/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <4 4>, <12 4>, <56 4>, <76 4>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
new file mode 100644
index 000000000..c5a6c8745
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sm8350 MTP";
+	compatible = "qcom,sm8350-mtp", "qcom,sm8350";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s11b_0p95>;
+		vdd-l8-supply = <&vreg_s2c_0p8>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+		};
+
+		vreg_l1b_0p88: ldo1 {
+			regulator-name = "vreg_l1b_0p88";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p96: ldo7 {
+			regulator-name = "vreg_l7b_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_s1c_1p86>;
+		vdd-l2-l8-supply = <&vreg_s1c_1p86>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+		};
+
+		vreg_s2c_0p8: smps2 {
+			regulator-name = "vreg_s2c_0p8";
+			regulator-min-microvolt = <640000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-name = "vreg_l2c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_uim1: ldo4 {
+			regulator-name = "vreg_l4c_uim1";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_uim2: ldo5 {
+			regulator-name = "vreg_l5c_uim2";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_1p2: ldo10 {
+			regulator-name = "vreg_l10c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p96: ldo11 {
+			regulator-name = "vreg_l11c_2p96";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/cdsp.mbn";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/modem.mbn";
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <52 8>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p96>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p88>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts
new file mode 100644
index 000000000..e6824c8c2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+	model = "Sony Xperia 5 III";
+	compatible = "sony,pdx214-generic", "qcom,sm8350";
+};
+
+&framebuffer {
+	width = <1080>;
+	height = <2520>;
+	stride = <(1080 * 4)>;
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "NC",
+			  "NC",
+			  "FOCUS_N";
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
new file mode 100644
index 000000000..c6f402c3e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+/dts-v1/;
+
+#include "sm8350-sony-xperia-sagami.dtsi"
+
+/ {
+	model = "Sony Xperia 1 III";
+	compatible = "sony,pdx215-generic", "qcom,sm8350";
+};
+
+&i2c13 {
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_a_cs>;
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "CAM_PWR_LD_EN",
+			  "NC",
+			  "FOCUS_N";
+
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio1";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-high;
+	};
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "NC",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
+
+&tlmm {
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "PM8008_1_RESET_N",
+			  "WLC_INT_N",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "CAM_MCLK4",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "TOF_RST_N",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN",
+			  "QLINK1_WMSS_RESET_N",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
new file mode 100644
index 000000000..7ae1eb0a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -0,0 +1,922 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	/*
+	 * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
+	 * Adding it will cause the bootloader to go crazy and randomly crash
+	 * shortly after closing UEFI boot services.. Perhaps that has something
+	 * to do with the OS running inside a VM now..?
+	 */
+
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@e1000000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0xe1000000 0 0x2300000>;
+
+			/* The display, even though it's 4K, initializes at 1080-ish p */
+			width = <1096>;
+			height = <2560>;
+			stride = <(1096 * 4)>;
+			format = "a8r8g8b8";
+			/*
+			 * That's (going to be) a lot of clocks, but it's necessary due
+			 * to unused clk cleanup & no panel driver yet
+			 */
+			clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-google-assist {
+			label = "Google Assistant Key";
+			gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFTMETA>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@e1000000 {
+			reg = <0 0xe1000000 0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s11>;
+
+		/*
+		 * ARC regulators:
+		 * S5 - mx.lvl
+		 * S6 - gfx.lvl
+		 * S9 - mxc.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <752000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1360000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L8 - lcx.lvl (ARC) */
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&pm8350c_s1>;
+		vdd-l2-l8-supply = <&pm8350c_s1>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* S2 - ebi.lvl (ARC) */
+
+		pm8350c_s3: smps3 {
+			regulator-name = "pm8350c_s3";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * ARC regulators:
+		 * S4 - mss.lvl
+		 * S6 - cx.lvl
+		 * S8 - mmcx.lvl
+		 */
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1048000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3304000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l11: ldo11 {
+			regulator-name = "pm8350c_l11";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+
+	/* TODO: Add pm8350b (just one ldo) once the driver part is in */
+
+	regulators-2 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1280000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <976000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <2208000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <904000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* Some subset of SONY IMX663 camera sensor @ 38 */
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,asp-sdout-hiz = <3>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c13 {
+	status = "okay";
+	/* Clock frequency was not specified downstream, let's park it to 100 KHz */
+	clock-frequency = <100000>;
+
+	/* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c17 {
+	status = "okay";
+	clock-frequency = <1000000>;
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&pil_ipa_fw_mem>;
+	firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn";
+	status = "okay";
+};
+
+&mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
+};
+
+&pm8350_gpios {
+	gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
+			  "LCD_ID",
+			  "SDR_MMW_THERM",
+			  "RF_ID",
+			  "NC",
+			  "FP_LDO_EN",
+			  "SP_ARI_PWR_ALARM",
+			  "NC",
+			  "G_ASSIST_N",
+			  "PM8350_OPTION"; /* GPIO_10 */
+
+	g_assist_n: g-assist-n-state {
+		pins = "gpio9";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8350b_gpios {
+	snapshot_n: snapshot-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <0>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pmk8350_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "VOL_DOWN_N",
+			  "PMK8350_OPTION";
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio3";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEUP>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
+};
+
+&spi14 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>;
+	gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+			  "APPS_I2C_0_SCL",
+			  "UWIDEC_PWR_EN",
+			  "HAP_RST_N",
+			  "NC",
+			  "NC",
+			  "PM8008_1_RESET_N",
+			  "NC",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "PM8350_OPTION", /* GPIO_10 */
+			  "NC",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "NC",
+			  "NC",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "TS_I2C_SDA", /* GPIO_20 */
+			  "TS_I2C_SCL",
+			  "TS_RESET_N",
+			  "TS_INT_N",
+			  "DISP_RESET_N",
+			  "SW_SERVICE",
+			  "DISP_ERR_FG",
+			  "TX_GTR_THRES_IN",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_30 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "FP_INT_N",
+			  "FP_RESET_N",
+			  "NC", /* GPIO_40 */
+			  "NC",
+			  "DEBUG_GPIO0",
+			  "FORCE_USB_BOOT",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK",
+			  "FP_SPI_CS_N",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC", /* GPIO_50 */
+			  "HAP_INT_N",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "SBU_SW_OE",
+			  "SBU_SW_SEL",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "NFC_I2C_SDA", /* GPIO_60 */
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "HST_WLAN_EN",
+			  "HST_BT_EN",
+			  "HW_ID_0",
+			  "HW_ID_1",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX", /* GPIO_70 */
+			  "HST_BT_UART_RX",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "RF_LCD_ID_EN",
+			  "RF_ID_EXTENSION",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HALL_INT_N", /* GPIO_80 */
+			  "USB_CC_DIR",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "CAM_SOF_TELE",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "WCD_RST_N",
+			  "ALS_PROX_INT_N",
+			  "NC", /* GPIO_90 */
+			  "NC",
+			  "TRAY_DET",
+			  "UDON_SWITCH_SEL",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "CAM_SOF",
+			  "RF_ID_EXTENSION_2",
+			  "RGBC_IR_INT",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "CCI_I2C0_SDA",
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL", /* GPIO_110 */
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL",
+			  "NC",
+			  "PM8008_1_IRQ",
+			  "CAM3_RESET_N",
+			  "IMU1_INT",
+			  "EXT_VD0_XVS",
+			  "NC", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+			  "NC",
+			  "UIM2_DETECT_EN",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET", /* GPIO_140 */
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK",
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "SM_MSS_GRFC5",
+			  "SM_MSS_GRFC6",
+			  "SM_MSS_GRFC7",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA", /* GPIO_150 */
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "HST_SW_CTRL",
+			  "DISP_VDDR_EN",
+			  "NC",
+			  "NC",
+			  "PA_INDICATOR_OR",
+			  "NC",
+			  "QLINK0_REQ",
+			  "QLINK0_EN", /* GPIO_160 */
+			  "QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8008_2_IRQ",
+			  "TELEC_PWR_EN",
+			  "PM8008_2_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1", /* GPIO_170 */
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "WCD_SWR_TX_DATA2",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N", /* GPIO_190 */
+			  "MAG_I2C_SDA",
+			  "MAG_I2C_SCL",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX", /* GPIO_200 */
+			  "HST_WLAN_UART_TX",
+			  "HST_WLAN_UART_RX";
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_active: sd-card-det-active-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_card_det_sleep: sd-card-det-sleep-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
+&ufs_mem_hc { status = "disabled"; };
+&ufs_mem_phy { status = "disabled"; };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
new file mode 100644
index 000000000..a7cf506f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -0,0 +1,4422 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/interconnect/qcom,sm8350.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/interconnect/qcom,sm8350.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <38400000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a78";
+			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x1";
+			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_APSS_OFF: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <2752>;
+				exit-latency-us = <3048>;
+				min-residency-us = <6118>;
+			};
+
+			CLUSTER_SLEEP_AOSS_SLEEP: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <3263>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8350", "qcom,scm";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_APSS_OFF &CLUSTER_SLEEP_AOSS_SLEEP>;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup100mhz {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	qup_opp_table_120mhz: opp-table-qup120mhz {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_aop_mem: memory@80700000 {
+			no-map;
+			reg = <0x0 0x80700000 0x0 0x160000>;
+		};
+
+		cmd_db: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		reserved_xbl_uefi_log: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x14000>;
+			no-map;
+		};
+
+		smem@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		pil_camera_mem: mmeory@85200000 {
+			reg = <0x0 0x85200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_cvp_mem: memory@85c00000 {
+			reg = <0x0 0x85c00000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: memory@86100000 {
+			reg = <0x0 0x86100000 0x0 0x2100000>;
+			no-map;
+		};
+
+		pil_slpi_mem: memory@88200000 {
+			reg = <0x0 0x88200000 0x0 0x1500000>;
+			no-map;
+		};
+
+		pil_cdsp_mem: memory@89700000 {
+			reg = <0x0 0x89700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_ipa_fw_mem: memory@8b500000 {
+			reg = <0x0 0x8b500000 0x0 0x10000>;
+			no-map;
+		};
+
+		pil_ipa_gsi_mem: memory@8b510000 {
+			reg = <0x0 0x8b510000 0x0 0xa000>;
+			no-map;
+		};
+
+		pil_gpu_mem: memory@8b51a000 {
+			reg = <0x0 0x8b51a000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_spss_mem: memory@8b600000 {
+			reg = <0x0 0x8b600000 0x0 0x100000>;
+			no-map;
+		};
+
+		pil_modem_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0x10000000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@9b800000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9b800000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		hyp_reserved_mem: memory@d0000000 {
+			reg = <0x0 0xd0000000 0x0 0x800000>;
+			no-map;
+		};
+
+		pil_trustedvm_mem: memory@d0800000 {
+			reg = <0x0 0xd0800000 0x0 0x76f7000>;
+			no-map;
+		};
+
+		qrtr_shbuf: memory@d7ef7000 {
+			reg = <0x0 0xd7ef7000 0x0 0x9000>;
+			no-map;
+		};
+
+		chan0_shbuf: memory@d7f00000 {
+			reg = <0x0 0xd7f00000 0x0 0x80000>;
+			no-map;
+		};
+
+		chan1_shbuf: memory@d7f80000 {
+			reg = <0x0 0xd7f80000 0x0 0x80000>;
+			no-map;
+		};
+
+		removed_mem: memory@d8800000 {
+			reg = <0x0 0xd8800000 0x0 0x6800000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8350";
+			reg = <0x0 0x00100000 0x0 0x1f0000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "ufs_card_rx_symbol_0_clk",
+				      "ufs_card_rx_symbol_1_clk",
+				      "ufs_card_tx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk",
+				      "usb3_uni_phy_sec_gcc_usb30_pipe_clk";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&ufs_mem_phy_lanes 0>,
+				 <&ufs_mem_phy_lanes 1>,
+				 <&ufs_mem_phy_lanes 2>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
+				 <0>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xff>;
+			iommus = <&apps_smmu 0x5f6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5e3 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			/* QUP no. 18 seems to be strictly SPI/UART-only */
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5a3 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart2: serial@98c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart3_default_state>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			/* QUP no. 3 seems to be strictly SPI-only */
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0xff>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_120mhz>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10d3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0 0x010d3000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_HWKM_CLK>;
+			clock-names = "core";
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8350-config-noc";
+			reg = <0 0x01500000 0 0xa580>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1580000 {
+			compatible = "qcom,sm8350-mc-virt";
+			reg = <0 0x01580000 0 0x1000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8350-system-noc";
+			reg = <0 0x01680000 0 0x1c200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8350-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1f180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8350-aggre2-noc";
+			reg = <0 0x01700000 0 0x33000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8350-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8350";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0", "msi1", "msi2", "msi3",
+					  "msi4", "msi5", "msi6", "msi7";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre1",
+				      "aggre0";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8350-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8350";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8350-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8350-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x24000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x594 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+			/* FIXME: Probing BAM DMA causes some abort and system hang */
+			status = "fail";
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8350-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x594 0x0011>,
+				 <&apps_smmu 0x596 0x0011>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+			/* FIXME: dependency BAM DMA is disabled */
+			status = "disabled";
+		};
+
+		ipa: ipa@1e40000 {
+			compatible = "qcom,sm8350-ipa";
+
+			iommus = <&apps_smmu 0x5c0 0x0>,
+				 <&apps_smmu 0x5c2 0x0>;
+			reg = <0 0x01e40000 0 0x8000>,
+			      <0 0x01e50000 0 0x4b20>,
+			      <0 0x01e04000 0 0x23000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					  "gsi",
+					  "ipa-clock-query",
+					  "ipa-setup-ready";
+
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			clock-names = "core";
+
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
+			interconnect-names = "memory",
+					     "config";
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&ipa_smp2p_out 0>,
+					   <&ipa_smp2p_out 1>;
+			qcom,smem-state-names = "ipa-clock-enabled-valid",
+						"ipa-clock-enabled";
+
+			status = "disabled";
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sm8350-lpass-lpi-pinctrl";
+			reg = <0 0x033c0000 0 0x20000>,
+			      <0 0x03550000 0 0x10000>;
+
+			clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 15>;
+		};
+
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-660.1", "qcom,adreno";
+
+			reg = <0 0x03d00000 0 0x40000>,
+			      <0 0x03d9e000 0 0x1000>,
+			      <0 0x03d61000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			status = "disabled";
+
+			zap-shader {
+				memory-region = <&pil_gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-840000000 {
+					opp-hz = /bits/ 64 <840000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+				};
+
+				opp-778000000 {
+					opp-hz = /bits/ 64 <778000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-738000000 {
+					opp-hz = /bits/ 64 <738000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-676000000 {
+					opp-hz = /bits/ 64 <676000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-608000000 {
+					opp-hz = /bits/ 64 <608000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-540000000 {
+					opp-hz = /bits/ 64 <540000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-491000000 {
+					opp-hz = /bits/ 64 <491000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-443000000 {
+					opp-hz = /bits/ 64 <443000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-379000000 {
+					opp-hz = /bits/ 64 <379000000>;
+					opp-level = <80 /* RPMH_REGULATOR_LEVEL_LOW_SVS_L1 */>;
+				};
+
+				opp-315000000 {
+					opp-hz = /bits/ 64 <315000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x34000>,
+			      <0 0x03de0000 0 0x10000>,
+			      <0 0x0b290000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub",
+				      "smmu_vote";
+
+			power-domains = <&gpucc GPU_CX_GDSC>,
+					<&gpucc GPU_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8350-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu",
+				     "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "bus",
+				      "iface",
+				      "ahb",
+				      "hlos1_vote_gpu_smmu",
+				      "cx_gmu",
+				      "hub_cx_int",
+				      "hub_aon";
+
+			power-domains = <&gpucc GPU_CX_GDSC>;
+			dma-coherent;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8350-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0xf080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8350-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx", "mss";
+
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8350-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8350-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_2_hsphy: phy@88e4000 {
+			compatible = "qcom,sm8250-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e4000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8350-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_2_qmpphy: phy-wrapper@88eb000 {
+			compatible = "qcom,sm8350-qmp-usb3-uni-phy";
+			reg = <0 0x088eb000 0 0x200>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>,
+				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+				 <&gcc GCC_USB3_PHY_SEC_BCR>;
+			reset-names = "phy", "common";
+
+			usb_2_ssphy: phy@88ebe00 {
+				reg = <0 0x088ebe00 0 0x200>,
+				      <0 0x088ec000 0 0x200>,
+				      <0 0x088eb200 0 0x1100>;
+				#phy-cells = <0>;
+				#clock-cells = <0>;
+				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_uni_phy_pipe_clk_src";
+			};
+		};
+
+		dc_noc: interconnect@90c0000 {
+			compatible = "qcom,sm8350-dc-noc";
+			reg = <0 0x090c0000 0 0x4200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9100000 {
+			compatible = "qcom,sm8350-gem-noc";
+			reg = <0 0x09100000 0 0xb4000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@9200000 {
+			compatible = "qcom,sm8350-llcc";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09300000 0 0x58000>, <0 0x09380000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+		};
+
+		compute_noc: interconnect@a0c0000 {
+			compatible = "qcom,sm8350-compute-noc";
+			reg = <0 0x0a0c0000 0 0xa180>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		usb_2: usb@a8f8800 {
+			compatible = "qcom,sm8350-dwc3", "qcom,dwc3";
+			reg = <0 0x0a8f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_SEC_GDSC>;
+
+			resets = <&gcc GCC_USB30_SEC_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_2_dwc3: usb@a800000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a800000 0 0xcd00>;
+				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8350-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "bus", "nrt_bus", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x820 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			dpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* TODO: opp-200000000 should work with
+				 * &rpmhpd_opp_low_svs, but one some of
+				 * sm8350_hdk boards reboot using this
+				 * opp.
+				 */
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-460000000 {
+					opp-hz = /bits/ 64 <460000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8350-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&dpu_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0x600>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi0_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-187500000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sm8350-dsi-phy-5nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi1_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				dsi1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					/* TODO: opp-187500000 should work with
+					 * &rpmhpd_opp_low_svs, but one some of
+					 * sm8350_hdk boards reboot using this
+					 * opp.
+					 */
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sm8350-dsi-phy-5nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8350-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8350-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+			qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>,   <55 306 4>,
+					  <59 312 3>, <62 374 2>,  <64 434 2>,   <66 438 3>,
+					  <69 86 1>,  <70 520 54>, <124 609 31>, <155 63 1>,
+					  <156 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x8>; /* SROT */
+			#qcom,sensors = <15>;
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x8>; /* SROT */
+			#qcom,sensors = <14>;
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c440000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c440000 0x0 0x1100>,
+			      <0x0 0x0c600000 0x0 0x2000000>,
+			      <0x0 0x0e600000 0x0 0x100000>,
+			      <0x0 0x0e700000 0x0 0xa0000>,
+			      <0x0 0x0c40a000 0x0 0x26000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8350-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 204>;
+			wakeup-parent = <&pdc>;
+
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_uart3_default_state: qup-uart3-default-state {
+				rx-pins {
+					pins = "gpio18";
+					function = "qup3";
+				};
+				tx-pins {
+					pins = "gpio19";
+					function = "qup3";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default-state {
+				pins = "gpio30", "gpio31";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart18_default: qup-uart18-default-state {
+				pins = "gpio68", "gpio69";
+				function = "qup18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio20", "gpio21";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio24", "gpio25";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c6_default: qup-i2c6-default-state {
+				pins = "gpio28", "gpio29";
+				function = "qup6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c7_default: qup-i2c7-default-state {
+				pins = "gpio32", "gpio33";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c8_default: qup-i2c8-default-state {
+				pins = "gpio36", "gpio37";
+				function = "qup8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c9_default: qup-i2c9-default-state {
+				pins = "gpio40", "gpio41";
+				function = "qup9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c10_default: qup-i2c10-default-state {
+				pins = "gpio44", "gpio45";
+				function = "qup10";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c11_default: qup-i2c11-default-state {
+				pins = "gpio48", "gpio49";
+				function = "qup11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c12_default: qup-i2c12-default-state {
+				pins = "gpio52", "gpio53";
+				function = "qup12";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c13_default: qup-i2c13-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_default: qup-i2c14-default-state {
+				pins = "gpio56", "gpio57";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c15_default: qup-i2c15-default-state {
+				pins = "gpio60", "gpio61";
+				function = "qup15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c16_default: qup-i2c16-default-state {
+				pins = "gpio64", "gpio65";
+				function = "qup16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c17_default: qup-i2c17-default-state {
+				pins = "gpio72", "gpio73";
+				function = "qup17";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_i2c19_default: qup-i2c19-default-state {
+				pins = "gpio76", "gpio77";
+				function = "qup19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8350-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8350-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				apr {
+					compatible = "qcom,apr-v2";
+					qcom,glink-channels = "apr_audio_svc";
+					qcom,domain = <APR_DOMAIN_ADSP>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					service@3 {
+						reg = <APR_SVC_ADSP_CORE>;
+						compatible = "qcom,q6core";
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+					};
+
+					q6afe: service@4 {
+						compatible = "qcom,q6afe";
+						reg = <APR_SVC_AFE>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6afedai: dais {
+							compatible = "qcom,q6afe-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+						};
+
+						q6afecc: clock-controller {
+							compatible = "qcom,q6afe-clocks";
+							#clock-cells = <2>;
+						};
+					};
+
+					q6asm: service@7 {
+						compatible = "qcom,q6asm";
+						reg = <APR_SVC_ASM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6asmdai: dais {
+							compatible = "qcom,q6asm-dais";
+							#address-cells = <1>;
+							#size-cells = <0>;
+							#sound-dai-cells = <1>;
+							iommus = <&apps_smmu 0x1801 0x0>;
+
+							dai@0 {
+								reg = <0>;
+							};
+
+							dai@1 {
+								reg = <1>;
+							};
+
+							dai@2 {
+								reg = <2>;
+							};
+						};
+					};
+
+					q6adm: service@8 {
+						compatible = "qcom,q6adm";
+						reg = <APR_SVC_ADM>;
+						qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+						q6routing: routing {
+							compatible = "qcom,q6adm-routing";
+							#sound-dai-cells = <0>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x20000>;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer@17c20000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			reg = <0x0 0x17c20000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17c21000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c21000 0x1000>,
+				      <0x17c22000 0x1000>;
+			};
+
+			frame@17c23000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c23000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c25000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c25000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c27000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c27000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c29000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c29000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17c2d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17c2d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8350-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8350-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0",
+					  "dcvsh-irq-1",
+					  "dcvsh-irq-2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		cdsp: remoteproc@98900000 {
+			compatible = "qcom,sm8350-cdsp-pas";
+			reg = <0 0x98900000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&pil_cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					qcom,non-secure-domain;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1181 0x0420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1182 0x0420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1183 0x0420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1184 0x0420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1185 0x0420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1186 0x0420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1187 0x0420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1188 0x0420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nspss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				nspss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nspss2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				nspss2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		nspss3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				nspss3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <1000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem1-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				modem1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem2-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem3-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				modem3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				modem4_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				camera1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cam-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				camera2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
new file mode 100644
index 000000000..bd5e8181f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -0,0 +1,1164 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pm8450.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 HDK";
+	compatible = "qcom,sm8450-hdk", "qcom,sm8450";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b_1p8>;
+		vdd-rxtx-supply = <&vreg_s10b_1p8>;
+		vdd-io-supply = <&vreg_s10b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_out: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
+	lt9611_1v2: lt9611-vdd12-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_1V2";
+
+		vin-supply = <&vph_pwr>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lt9611_3v3: lt9611-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "LT9611_3V3";
+
+		vin-supply = <&vreg_bob>;
+		gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+
+			};
+		};
+	};
+
+	thermal-zones {
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 2>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		rear-tof-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 5>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		skin-msm-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 1>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		therm1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 3>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		therm2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 6>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		usb-conn-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 7>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wide-rfc-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 4>;
+
+			trips {
+				active-config0 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+
+		xo-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8350_adc_tm 0>;
+
+			trips {
+				active-config0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <966000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7e_2p8: ldo7 {
+			regulator-name = "vreg_l7e_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&dispcc {
+	status = "okay";
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	lt9611_codec: hdmi-bridge@2b {
+		compatible = "lontium,lt9611uxc";
+		reg = <0x2b>;
+
+		interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v2>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_connector_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc-supply = <&vreg_bob>;
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp0_out: endpoint {
+				data-lanes = <0 1>;
+				remote-endpoint = <&usb_1_qmpphy_dp_in>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+	max-link-speed = <2>;
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l2h_0p91>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pm8350_temp_alarm {
+	io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP(1)>;
+	io-channel-names = "thermal";
+};
+
+&pm8350b_temp_alarm {
+	io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmr735a_temp_alarm {
+	io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>;
+	io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	skin-msm-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	camera-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	therm1-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	wide-rfc-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	rear-tof-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	therm2-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+
+	usb-conn-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM5_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+	};
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "pmk8350_xo_therm";
+	};
+
+	channel@103 {
+		reg = <PM8350_ADC7_DIE_TEMP(1)>;
+		label = "pm8350_die_temp";
+	};
+
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "skin_msm_temp";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "camera_temp";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "therm1_temp";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "wide_rfc_temp";
+	};
+
+	channel@148 {
+		reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "rear_tof_temp";
+	};
+
+	channel@14c {
+		reg = <PM8350_ADC7_GPIO3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "therm2_temp";
+	};
+
+	channel@303 {
+		reg = <PM8350B_ADC7_DIE_TEMP>;
+		label = "pm8350b_die_temp";
+	};
+
+	channel@348 {
+		reg = <PM8350B_ADC7_AMUX_THM5_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "usb_conn_temp";
+	};
+
+	channel@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+	};
+
+	channel@44a {
+		reg = <PMR735A_ADC7_GPIO1_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "qtm_w_temp";
+	};
+
+	channel@44b {
+		reg = <PMR735A_ADC7_GPIO2_100K_PU>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "qtm_n_temp";
+	};
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/cdsp.mbn";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8450/modem.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8450/slpi.mbn";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sm8450-sndcard";
+	model = "SM8450-HDK";
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_s10b_1p8>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	lt9611_irq_pin: lt9611-irq-state {
+		pins = "gpio44";
+		function = "gpio";
+		bias-disable;
+	};
+
+	lt9611_rst_pin: lt9611-rst-state {
+		pins = "gpio107";
+		function = "gpio";
+		output-high;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p91>;
+
+	orientation-switch;
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_1_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic02_default>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_s10b_1p8>;
+	qcom,dmic-sample-rate = <600000>;
+
+	status = "okay";
+};
+
+&tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio1";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio43";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
new file mode 100644
index 000000000..374793277
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pm8450.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 QRD";
+	compatible = "qcom,sm8450-qrd", "qcom,sm8450";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/cdsp.mbn";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8450/modem.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8450/slpi.mbn";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_1p8>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+};
+
+&spi18 {
+	status = "okay";
+};
+
+&spi19 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p91>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
new file mode 100644
index 000000000..daf2f91f3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+	model = "Sony Xperia 1 IV";
+	compatible = "sony,pdx223", "qcom,sm8450";
+
+	imx316_lvdd_regulator: imx316-lvdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx316_lvdd_regulator";
+		gpio = <&pm8350b_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_ld_en>;
+	};
+
+	tcs3490_vdd_regulator: rgbcir-vdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "tcs3490_vdd_regulator";
+		gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgbc_ir_pwr_en>;
+	};
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "CAM_PWR_LD_EN",
+			  "NC",
+			  "FOCUS_N";
+
+	cam_pwr_ld_en: cam-pwr-ld-en-state {
+		pins = "gpio6";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <0>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "WLC_ID",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+
+	rgbc_ir_pwr_en: rgbc-ir-pwr-en-state {
+		pins = "gpio6";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-low;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "NC", /* GPIO_0 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "PM8010_2_RESET_N",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "NC",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "TOF_RST_N",
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "QLINK1_REQ",
+			  "QLINK1_EN", /* GPIO_160 */
+			  "QLINK1_WMSS_RESET_N",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
new file mode 100644
index 000000000..dc4de2d3f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "sm8450-sony-xperia-nagara.dtsi"
+
+/ {
+	model = "Sony Xperia 5 IV";
+	compatible = "sony,pdx224", "qcom,sm8450";
+
+	imx563_vdig_regulator: imx563-vdig-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx563_vdig_regulator";
+		gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&uwidec_pwr_en>;
+	};
+};
+
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "NC",
+			  "NC",
+			  "FOCUS_N";
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "WLC_ID",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
+
+&tlmm {
+	gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
+			  "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
+			  "TELE_SPI_CLK",
+			  "TELE_SPI_CS_N",
+			  "WLC_I2C_SDA",
+			  "WLC_I2C_SCL",
+			  "NC",
+			  "PM8010_1_RESET_N",
+			  "WLC_INT_N",
+			  "NC",
+			  "NC", /* GPIO_10 */
+			  "NC",
+			  "DISP_ERR_FG",
+			  "HALL_INT_N",
+			  "ALS_PROX_INT_N",
+			  "IMU1_INT",
+			  "TS_I2C_SDA",
+			  "TS_I2C_SCL",
+			  "DISP_RESET_N",
+			  "DISP_VDDR_EN",
+			  "TS_RESET_N", /* GPIO_20 */
+			  "TS_INT_N",
+			  "UWIDEC_PWR_EN",
+			  "TELEC_PWR_EN",
+			  "CAM1_RESET_N",
+			  "LEO_CAM0_RESET_N",
+			  "DEBUG_UART_TX",
+			  "DEBUG_UART_RX",
+			  "FP_SPI_MISO",
+			  "FP_SPI_MOSI",
+			  "FP_SPI_CLK", /* GPIO_30 */
+			  "FP_SPI_CS_N",
+			  "NFC_I2C_SDA",
+			  "NFC_I2C_SCL",
+			  "NFC_EN",
+			  "NFC_CLK_REQ",
+			  "NFC_ESE_SPI_MISO",
+			  "NFC_ESE_SPI_MOSI",
+			  "NFC_ESE_SPI_CLK",
+			  "NFC_ESE_SPI_CS",
+			  "FP_INT_N", /* GPIO_40 */
+			  "NC",
+			  "FP_RESET_N",
+			  "WCD_RST_N",
+			  "NC",
+			  "NFC_DWL_REQ",
+			  "NFC_IRQ",
+			  "FORCE_USB_BOOT",
+			  "APPS_I2C_1_SDA",
+			  "APPS_I2C_1_SCL",
+			  "SBU_SW_OE", /* GPIO_50 */
+			  "SBU_SW_SEL",
+			  "SPK_AMP_I2C_SDA",
+			  "SPK_AMP_I2C_SCL",
+			  "NC",
+			  "NC",
+			  "CAMSENSOR_I2C_SDA",
+			  "CAMSENSOR_I2C_SCL",
+			  "GNSS_ELNA_EN0",
+			  "NC",
+			  "NC", /* GPIO_60 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RGBC_IR_INT",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC", /* GPIO_70 */
+			  "NC",
+			  "HAP_I2C_SDA",
+			  "HAP_I2C_SCL",
+			  "HAP_RST_N",
+			  "HAP_INT_N",
+			  "HST_BT_UART_CTS",
+			  "HST_BT_UART_RFR",
+			  "HST_BT_UART_TX",
+			  "HST_BT_UART_RX",
+			  "HST_WLAN_EN", /* GPIO_80 */
+			  "HST_BT_EN",
+			  "HST_SW_CTRL",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "DISP_VSYNC",
+			  "NC",
+			  "NC",
+			  "HW_ID_0",
+			  "HW_ID_1", /* GPIO_90 */
+			  "USB_CC_DIR",
+			  "TRAY_DET",
+			  "SW_SERVICE",
+			  "PCIE0_RESET_N",
+			  "PCIE0_CLK_REQ_N",
+			  "PCIE0_WAKE_N",
+			  "OIS_ENABLE_WIDE",
+			  "DEBUG_GPIO0",
+			  "NC",
+			  "CAM_MCLK0", /* GPIO_100 */
+			  "CAM_MCLK1",
+			  "CAM_MCLK2",
+			  "CAM_MCLK3",
+			  "NC",
+			  "NC",
+			  "NC", /* SONY didn't rename this, but there's no ToF so it's likely NC */
+			  "CAM_SOF",
+			  "NC",
+			  "AFEXPTMG_TELE",
+			  "CCI_I2C0_SDA", /* GPIO_110 */
+			  "CCI_I2C0_SCL",
+			  "CCI_I2C1_SDA",
+			  "CCI_I2C1_SCL",
+			  "CCI_I2C2_SDA",
+			  "CCI_I2C2_SCL",
+			  "NC",
+			  "CAM2_RESET_N",
+			  "NC",
+			  "EXT_VD0_XVS",
+			  "CAM3_RESET_N", /* GPIO_120 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "RF_ID_EXTENSION_2",
+			  "HAP_I2S_CLK",
+			  "HAP_I2S_DOUT",
+			  "HAP_TRG1",
+			  "HAP_I2S_SYNC",
+			  "UIM1_DATA", /* GPIO_130 */
+			  "UIM1_CLK",
+			  "UIM1_RESET",
+			  "TRAY_DET",
+			  "UIM2_DATA",
+			  "UIM2_CLK",
+			  "UIM2_RESET",
+			  "UIM2_PRESENT",
+			  "SM_RFFE0_CLK",
+			  "SM_RFFE0_DATA",
+			  "SM_RFFE1_CLK", /* GPIO_140 */
+			  "SM_RFFE1_DATA",
+			  "SM_MSS_GRFC4",
+			  "HST_AS_EN",
+			  "LAA_RX_EN",
+			  "NC",
+			  "SM_RFFE4_CLK",
+			  "SM_RFFE4_DATA",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "RF_LCD_ID_EN", /* GPIO_150 */
+			  "RF_ID_EXTENSION",
+			  "SM_MSS_GRFC12",
+			  "NFC_COLD_RST",
+			  "NC",
+			  "NC",
+			  "SDR1_QLINK0_REQ",
+			  "SDR1_QLINK0_EN",
+			  "SDR1_QLINK0_WMSS_RESET_N",
+			  "NC",
+			  "NC", /* GPIO_160 */
+			  "NC",
+			  "SDR2_QLINK2_REQ",
+			  "SDR2_QLINK2_EN",
+			  "SDR2_QLINK2_WMSS_RESET_N",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1", /* GPIO_170 */
+			  "SM_DMIC1_CLK",
+			  "SM_DMIC1_DATA",
+			  "SM_DMIC2_CLK",
+			  "SM_DMIC2_DATA",
+			  "SPK_AMP_I2S_CLK",
+			  "SPK_AMP_I2S_WS",
+			  "NC",
+			  "NC",
+			  "WCD_SWR_TX_DATA2",
+			  "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+			  "SPK_AMP_I2S_ASP_DOUT",
+			  "SPK_AMP_INT_N",
+			  "SPK_AMP_RESET_N",
+			  "HST_BT_WLAN_SLIMBUS_CLK",
+			  "HST_BT_WLAN_SLIMBUS_DAT0",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "MAG_I2C_SDA", /* GPIO_190 */
+			  "MAG_I2C_SCL",
+			  "IMU_SPI_MISO",
+			  "IMU_SPI_MOSI",
+			  "IMU_SPI_CLK",
+			  "IMU_SPI_CS_N",
+			  "SENSOR_I2C_SDA",
+			  "SENSOR_I2C_SCL",
+			  "OIS_TELE_I2C_SDA",
+			  "OIS_TELE_I2C_SCL",
+			  "NC", /* GPIO_200 */
+			  "OIS_ENABLE_TELE",
+			  "HST_BLE_UART_TX",
+			  "HST_BLE_UART_RX",
+			  "HSTP_CLK_CFG_SEL",
+			  "NC",
+			  "APPS_I2C_0_SDA",
+			  "APPS_I2C_0_SCL",
+			  "CCI_I2C3_SDA",
+			  "CCI_I2C3_SCL";
+
+	uwidec_pwr_en: uwidec-pwr-en-state {
+		pins = "gpio22";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
new file mode 100644
index 000000000..001fb2723
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -0,0 +1,798 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
+ */
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pm8450.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		label = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+
+		key-camera-focus {
+			label = "Camera Focus";
+			linux,code = <KEY_CAMERA_FOCUS>;
+			gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-camera-snapshot {
+			label = "Camera Snapshot";
+			linux,code = <KEY_CAMERA>;
+			gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		adsp_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		video_mem: memory@9fd00000 {
+			reg = <0x0 0x9fd00000 0x0 0x700000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f3300000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf3300000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x200000>;
+			console-size = <0x40000>;
+			record-size = <0x1000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+
+	/* Sadly, the voltages for these GPIO regulators are unknown. */
+	imx650_vana_regulator: imx650-vana-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "imx650_vana_regulator";
+		gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&telec_pwr_en>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&pm8350_s11>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&pm8350_s12>;
+
+		/*
+		 * ARC regulators:
+		 * s5 - gfx.lvl
+		 * l8 - lcx.lvl
+		 */
+
+		pm8350_s10: smps10 {
+			regulator-name = "pm8350_s10";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8350_s11: smps11 {
+			regulator-name = "pm8350_s11";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		pm8350_s12: smps12 {
+			regulator-name = "pm8350_s12";
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		pm8350_l1: ldo1 {
+			regulator-name = "pm8350_l1";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l2: ldo2 {
+			regulator-name = "pm8350_l2";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l3: ldo3 {
+			regulator-name = "pm8350_l3";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l5: ldo5 {
+			regulator-name = "pm8350_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l6: ldo6 {
+			regulator-name = "pm8350_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l7: ldo7 {
+			regulator-name = "pm8350_l7";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350_l9: ldo9 {
+			regulator-name = "pm8350_l9";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&pm8350_s12>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		/*
+		 * ARC regulators:
+		 * s2 - mxc.lvl
+		 * s4 - mss.lvl
+		 * s6 - cx.lvl
+		 */
+
+		pm8350c_s1: smps1 {
+			regulator-name = "pm8350c_s1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		pm8350c_s10: smps10 {
+			regulator-name = "pm8350c_s10";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3400000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		pm8350c_l1: ldo1 {
+			regulator-name = "pm8350c_l1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l2: ldo2 {
+			regulator-name = "pm8350c_l2";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l3: ldo3 {
+			regulator-name = "pm8350c_l3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l4: ldo4 {
+			regulator-name = "pm8350c_l4";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l5: ldo5 {
+			regulator-name = "pm8350c_l5";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l6: ldo6 {
+			regulator-name = "pm8350c_l6";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l7: ldo7 {
+			regulator-name = "pm8350c_l7";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l8: ldo8 {
+			regulator-name = "pm8350c_l8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l9: ldo9 {
+			regulator-name = "pm8350c_l9";
+			regulator-min-microvolt = <2960000>;
+			/* Originally max = 3008000 but SDHCI expects 2960000 */
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l10: ldo10 {
+			regulator-name = "pm8350c_l10";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l12: ldo12 {
+			regulator-name = "pm8350c_l12";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8350c_l13: ldo13 {
+			regulator-name = "pm8350c_l13";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		/*
+		 * ARC regulators:
+		 * S2 - ebi.lvl
+		 * S4 - mmcx.lvl
+		 * S6 - mx.lvl
+		 * L1 - lmx.lvl
+		 */
+
+		pm8450_s3: smps3 {
+			regulator-name = "pm8450_s3";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <600000>;
+		};
+
+		pm8450_l2: ldo2 {
+			regulator-name = "pm8450_l2";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pm8450_l3: ldo3 {
+			regulator-name = "pm8450_l3";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&pmr735a_s2>;
+		vdd-l3-supply = <&pmr735a_s1>;
+		vdd-l4-supply = <&pm8350c_s1>;
+		vdd-l5-l6-supply = <&pm8350c_s1>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		pmr735a_s1: smps1 {
+			regulator-name = "pmr735a_s1";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		pmr735a_s2: smps2 {
+			regulator-name = "pmr735a_s2";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		pmr735a_s3: smps3 {
+			regulator-name = "pmr735a_s3";
+			regulator-min-microvolt = <435000>;
+			regulator-max-microvolt = <2352000>;
+		};
+
+		pmr735a_l1: ldo1 {
+			regulator-name = "pmr735a_l1";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pmr735a_l2: ldo2 {
+			regulator-name = "pmr735a_l2";
+			regulator-min-microvolt = <480000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		pmr735a_l3: ldo3 {
+			regulator-name = "pmr735a_l3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l4: ldo4 {
+			regulator-name = "pmr735a_l4";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		pmr735a_l5: ldo5 {
+			regulator-name = "pmr735a_l5";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		pmr735a_l6: ldo6 {
+			regulator-name = "pmr735a_l6";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pmr735a_l7: ldo7 {
+			regulator-name = "pmr735a_l7";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <21 0x2008>;
+		vdd-supply = <&pm8350c_l2>;
+		avdd-supply = <&pm8350c_l3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_default &ts_int_default>;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@75 {
+		compatible = "dlg,slg51000";
+		reg = <0x75>;
+		dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_pwr_a_cs>;
+
+		regulators {
+			slg51000_a_ldo1: ldo1 {
+				regulator-name = "slg51000_a_ldo1";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo2: ldo2 {
+				regulator-name = "slg51000_a_ldo2";
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			slg51000_a_ldo3: ldo3 {
+				regulator-name = "slg51000_a_ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo4: ldo4 {
+				regulator-name = "slg51000_a_ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+
+			slg51000_a_ldo5: ldo5 {
+				regulator-name = "slg51000_a_ldo5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo6: ldo6 {
+				regulator-name = "slg51000_a_ldo6";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			slg51000_a_ldo7: ldo7 {
+				regulator-name = "slg51000_a_ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* NXP SN1X0 NFC @ 28 */
+};
+
+&i2c14 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	cs35l41_l: speaker-amp@40 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x40>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+
+	cs35l41_r: speaker-amp@41 {
+		compatible = "cirrus,cs35l41";
+		reg = <0x41>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
+		cirrus,boost-peak-milliamp = <4000>;
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-cap-microfarad = <15>;
+		cirrus,gpio2-src-select = <2>;
+		cirrus,gpio2-output-enable;
+		cirrus,asp-sdout-hiz = <3>;
+		#sound-dai-cells = <1>;
+	};
+};
+
+&i2c15 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	/* AMS TCS3490 RGB+IR color sensor @ 72 */
+};
+
+&i2c19 {
+	clock-frequency = <1000000>;
+	status = "okay";
+
+	/* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
+};
+
+&pcie0 {
+	max-link-speed = <2>;
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&pm8350_l5>;
+	vdda-pll-supply = <&pm8350_l6>;
+	status = "okay";
+};
+
+&pm8350_gpios {
+	gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
+			  "LCD_ID",
+			  "SDR_MMW_THERM",
+			  "RF_ID",
+			  "NC",
+			  "VOL_DOWN_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8350_OPTION"; /* GPIO_10 */
+
+	vol_down_n: vol-down-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8350b_gpios {
+	cam_pwr_a_cs: cam-pwr-a-cs-state {
+		pins = "gpio1";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		power-source = <1>;
+		drive-push-pull;
+		output-high;
+	};
+
+	snapshot_n: snapshot-n-state {
+		pins = "gpio5";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	focus_n: focus-n-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <0>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8450_gpios {
+	gpio-line-names = "FP_LDO_EN", /* GPIO_1 */
+			  "",
+			  "",
+			  "";
+};
+
+&pmk8350_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "DISP_THERM",
+			  "PMK8350_OPTION";
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEUP>;
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8450/Sony/nagara/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8450/Sony/nagara/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_slpi {
+	firmware-name = "qcom/sm8450/Sony/nagara/slpi.mbn";
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
+	vmmc-supply = <&pm8350c_l9>;
+	vqmmc-supply = <&pm8350c_l6>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&spi10 {
+	status = "okay";
+
+	/* NXP SN1X0 NFC Secure Element @ 0 */
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>;
+
+	ts_reset_default: ts-reset-default-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	telec_pwr_en: telec-pwr-en-state {
+		pins = "gpio23";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	sdc2_card_det_n: sd-card-det-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&pm8350_l5>;
+	vdda18-supply = <&pm8350c_l1>;
+	vdda33-supply = <&pm8350_l2>;
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&pm8350_l6>;
+	vdda-pll-supply = <&pm8350_l1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
new file mode 100644
index 000000000..79cc8fbcd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -0,0 +1,5224 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sm8450.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-camcc.h>
+#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,sm8450.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <76800000>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 0>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 1>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "qcom,kryo780";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
+			clocks = <&cpufreq_hw 2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1550>;
+				min-residency-us = <4791>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2700>;
+				exit-latency-us = <3500>;
+				min-residency-us = <13959>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8450", "qcom,scm";
+			qcom,dload-mode = <&tcsr 0x13000>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			#reset-cells = <1>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8450-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8450-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0x0 0xa0000000 0x0 0x0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	qup_opp_table_100mhz: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: memory@80000000 {
+			reg = <0x0 0x80000000 0x0 0x600000>;
+			no-map;
+		};
+
+		xbl_dt_log_mem: memory@80600000 {
+			reg = <0x0 0x80600000 0x0 0x40000>;
+			no-map;
+		};
+
+		xbl_ramdump_mem: memory@80640000 {
+			reg = <0x0 0x80640000 0x0 0x180000>;
+			no-map;
+		};
+
+		xbl_sc_mem: memory@807c0000 {
+			reg = <0x0 0x807c0000 0x0 0x40000>;
+			no-map;
+		};
+
+		aop_image_mem: memory@80800000 {
+			reg = <0x0 0x80800000 0x0 0x60000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: memory@80860000 {
+			compatible = "qcom,cmd-db";
+			reg = <0x0 0x80860000 0x0 0x20000>;
+			no-map;
+		};
+
+		aop_config_mem: memory@80880000 {
+			reg = <0x0 0x80880000 0x0 0x20000>;
+			no-map;
+		};
+
+		tme_crash_dump_mem: memory@808a0000 {
+			reg = <0x0 0x808a0000 0x0 0x40000>;
+			no-map;
+		};
+
+		tme_log_mem: memory@808e0000 {
+			reg = <0x0 0x808e0000 0x0 0x4000>;
+			no-map;
+		};
+
+		uefi_log_mem: memory@808e4000 {
+			reg = <0x0 0x808e4000 0x0 0x10000>;
+			no-map;
+		};
+
+		/* secdata region can be reused by apps */
+		smem: memory@80900000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x80900000 0x0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		cpucp_fw_mem: memory@80b00000 {
+			reg = <0x0 0x80b00000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: memory@80c00000 {
+			reg = <0x0 0x80c00000 0x0 0x4600000>;
+			no-map;
+		};
+
+		video_mem: memory@85700000 {
+			reg = <0x0 0x85700000 0x0 0x700000>;
+			no-map;
+		};
+
+		adsp_mem: memory@85e00000 {
+			reg = <0x0 0x85e00000 0x0 0x2100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@88000000 {
+			reg = <0x0 0x88000000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@89900000 {
+			reg = <0x0 0x89900000 0x0 0x2000000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8b900000 {
+			reg = <0x0 0x8b900000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: memory@8b910000 {
+			reg = <0x0 0x8b910000 0x0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: memory@8b91a000 {
+			reg = <0x0 0x8b91a000 0x0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: memory@8ba00000 {
+			reg = <0x0 0x8ba00000 0x0 0x180000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: memory@8bb80000 {
+			reg = <0x0 0x8bb80000 0x0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: memory@8bbe0000 {
+			reg = <0x0 0x8bbe0000 0x0 0x20000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8bc00000 {
+			reg = <0x0 0x8bc00000 0x0 0x13200000>;
+			no-map;
+		};
+
+		cvp_mem: memory@9ee00000 {
+			reg = <0x0 0x9ee00000 0x0 0x700000>;
+			no-map;
+		};
+
+		camera_mem: memory@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x800000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@9fd00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9fd00000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		xbl_sc_mem2: memory@a6e00000 {
+			reg = <0x0 0xa6e00000 0x0 0x40000>;
+			no-map;
+		};
+
+		global_sync_mem: memory@a6f00000 {
+			reg = <0x0 0xa6f00000 0x0 0x100000>;
+			no-map;
+		};
+
+		/* uefi region can be reused by APPS */
+
+		/* Linux kernel image is loaded at 0xa0000000 */
+
+		oem_vm_mem: memory@bb000000 {
+			reg = <0x0 0xbb000000 0x0 0x5000000>;
+			no-map;
+		};
+
+		mte_mem: memory@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x20000000>;
+			no-map;
+		};
+
+		qheebsp_reserved_mem: memory@e0000000 {
+			reg = <0x0 0xe0000000 0x0 0x600000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: memory@e0600000 {
+			reg = <0x0 0xe0600000 0x0 0x400000>;
+			no-map;
+		};
+
+		hyp_reserved_mem: memory@e0a00000 {
+			reg = <0x0 0xe0a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: memory@e0b00000 {
+			reg = <0x0 0xe0b00000 0x0 0x4af3000>;
+			no-map;
+		};
+
+		trust_ui_vm_qrtr: memory@e55f3000 {
+			reg = <0x0 0xe55f3000 0x0 0x9000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk0_ring: memory@e55fc000 {
+			reg = <0x0 0xe55fc000 0x0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_swiotlb: memory@e5600000 {
+			reg = <0x0 0xe5600000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: memory@e8800000 {
+			reg = <0x0 0xe8800000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: memory@e8900000 {
+			reg = <0x0 0xe8900000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: memory@e9b00000 {
+			reg = <0x0 0xe9b00000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: memory@ea000000 {
+			reg = <0x0 0xea000000 0x0 0x3900000>;
+			no-map;
+		};
+
+		trusted_apps_ext_mem: memory@ed900000 {
+			reg = <0x0 0xed900000 0x0 0x3b00000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sm8450";
+			reg = <0x0 0x00100000 0x0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <&pcie0_lane>,
+				 <&pcie1_lane>,
+				 <0>,
+				 <&ufs_mem_phy_lanes 0>,
+				 <&ufs_mem_phy_lanes 1>,
+				 <&ufs_mem_phy_lanes 2>,
+				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+			clock-names = "bi_tcxo",
+				      "sleep_clk",
+				      "pcie_0_pipe_clk",
+				      "pcie_1_pipe_clk",
+				      "pcie_1_phy_aux_clk",
+				      "ufs_phy_rx_symbol_0_clk",
+				      "ufs_phy_rx_symbol_1_clk",
+				      "ufs_phy_tx_symbol_0_clk",
+				      "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x496 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x483 0x0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c15: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00880000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_data_clk>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi16: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00884000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_data_clk>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi17: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00888000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0088c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_data_clk>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi18: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00890000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_data_clk>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi19: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c20: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00894000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c20_data_clk>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			uart20: serial@894000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart20_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			spi20: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c21: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00898000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c21_data_clk>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi21: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma0: dma-controller@900000 {
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00900000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x5b6 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x5a3 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table_100mhz>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00994000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00998000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@99c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8450-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x7e>;
+			iommus = <&apps_smmu 0x56 0x0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x43 0x0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a80000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a84000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a88000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a94000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_data_clk>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x00a98000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8450-prng-ee", "qcom,prng-ee";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
+		pcie0: pci@1c00000 {
+			compatible = "qcom,pcie-sm8450-pcie0";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			/*
+			 * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
+			 * Hence, the IDs are swapped.
+			 */
+			msi-map = <0x0 &gic_its 0x5981 0x1>,
+				  <0x100 &gic_its 0x5980 0x1>;
+			msi-map-mask = <0xff00>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+				 <&pcie0_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x200>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie0_lane: phy@1c06200 {
+				reg = <0 0x01c06e00 0 0x200>, /* tx */
+				      <0 0x01c07000 0 0x200>, /* rx */
+				      <0 0x01c06200 0 0x200>, /* pcs */
+				      <0 0x01c06600 0 0x200>; /* pcs_pcie */
+				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_0_pipe_clk";
+			};
+		};
+
+		pcie1: pci@1c08000 {
+			compatible = "qcom,pcie-sm8450-pcie1";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x40000000 0 0xf1d>,
+			      <0 0x40000f20 0 0xa8>,
+			      <0 0x40001000 0 0x1000>,
+			      <0 0x40100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+			/*
+			 * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
+			 * Hence, the IDs are swapped.
+			 */
+			msi-map = <0x0 &gic_its 0x5a01 0x1>,
+				  <0x100 &gic_its 0x5a00 0x1>;
+			msi-map-mask = <0xff00>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+				 <&pcie1_lane>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c80 0x1>,
+				    <0x100 &apps_smmu 0x1c81 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_lane>;
+			phy-names = "pciephy";
+
+			perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie1_default_state>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0f000 {
+			compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01c0f000 0 0x200>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+
+			pcie1_lane: phy@1c0e000 {
+				reg = <0 0x01c0e000 0 0x200>, /* tx */
+				      <0 0x01c0e200 0 0x300>, /* rx */
+				      <0 0x01c0f200 0 0x200>, /* pcs */
+				      <0 0x01c0e800 0 0x200>, /* tx */
+				      <0 0x01c0ea00 0 0x300>, /* rx */
+				      <0 0x01c0f400 0 0xc00>; /* pcs_pcie */
+				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+				clock-names = "pipe0";
+
+				#clock-cells = <0>;
+				#phy-cells = <0>;
+				clock-output-names = "pcie_1_pipe_clk";
+			};
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8450-config-noc";
+			reg = <0 0x01500000 0 0x1c000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8450-system-noc";
+			reg = <0 0x01680000 0 0x1e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8450-pcie-anoc";
+			reg = <0 0x016c0000 0 0xe280>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8450-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1c080>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8450-aggre2-noc";
+			reg = <0 0x01700000 0 0x31080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&rpmhcc RPMH_IPA_CLK>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8450-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1fc0000 {
+			compatible = "qcom,sm8450-tcsr", "syscon";
+			reg = <0x0 0x1fc0000 0x0 0x30000>;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8450-usb-hs-phy",
+				     "qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e3000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8450-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8450-slpi-pas";
+			reg = <0 0x02400000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "sdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x0541 0x0>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x0542 0x0>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x0543 0x0>;
+						/* note: shared-cb = <4> in downstream */
+					};
+				};
+			};
+		};
+
+		wsa2macro: codec@31e0000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x031e0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr4: soundwire-controller@31f0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x031f0000 0 0x2000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		rxmacro: codec@3200000 {
+			compatible = "qcom,sm8450-lpass-rx-macro";
+			reg = <0 0x03200000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@3210000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03210000 0 0x2000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <5>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		txmacro: codec@3220000 {
+			compatible = "qcom,sm8450-lpass-tx-macro";
+			reg = <0 0x03220000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		wsamacro: codec@3240000 {
+			compatible = "qcom,sm8450-lpass-wsa-macro";
+			reg = <0 0x03240000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&vamacro>;
+			clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+					  <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>, <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire-controller@3250000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x03250000 0 0x2000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire-controller@33b0000 {
+			compatible = "qcom,soundwire-v1.7.0";
+			reg = <0 0x033b0000 0 0x2000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+
+			clocks = <&txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		vamacro: codec@33f0000 {
+			compatible = "qcom,sm8450-lpass-va-macro";
+			reg = <0 0x033f0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec", "npl";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0 0x30000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1801 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1803 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1804 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1805 0x0>;
+					};
+				};
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8450-cdsp-pas";
+			reg = <0 0x32300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x2161 0x0400>,
+							 <&apps_smmu 0x1021 0x1420>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x2162 0x0400>,
+							 <&apps_smmu 0x1022 0x1420>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x2163 0x0400>,
+							 <&apps_smmu 0x1023 0x1420>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x2164 0x0400>,
+							 <&apps_smmu 0x1024 0x1420>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x2165 0x0400>,
+							 <&apps_smmu 0x1025 0x1420>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x2166 0x0400>,
+							 <&apps_smmu 0x1026 0x1420>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x2167 0x0400>,
+							 <&apps_smmu 0x1027 0x1420>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x2168 0x0400>,
+							 <&apps_smmu 0x1028 0x1420>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8450-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8450-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		cci0: cci@ac15000 {
+			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac15000 0 0x1000>;
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac16000 {
+			compatible = "qcom,sm8450-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac16000 0 0x1000>;
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+			pinctrl-0 = <&cci2_default &cci3_default>;
+			pinctrl-1 = <&cci2_sleep &cci3_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,sm8450-camcc";
+			reg = <0 0x0ade0000 0 0x20000>;
+			clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8450-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			/* same path used twice */
+			interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+					<&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "mdp0-mem",
+					     "mdp1-mem",
+					     "cpu-cfg";
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&gcc GCC_DISP_SF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			iommus = <&apps_smmu 0x2800 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8450-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-172000000 {
+						opp-hz = /bits/ 64 <172000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sm8450-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,sm8450-dsi-phy-5nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,sm8450-dsi-phy-5nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96900 0 0x260>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8450-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8450-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>,
+					  <94 609 31>, <125 63 1>, <126 716 12>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x00003000>,
+			      <0 0x0c500000 0 0x00400000>,
+			      <0 0x0c440000 0 0x00080000>,
+			      <0 0x0c4c0000 0 0x00010000>,
+			      <0 0x0c42d000 0 0x00010000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		ipcc: mailbox@ed18000 {
+			compatible = "qcom,sm8450-ipcc", "qcom,ipcc";
+			reg = <0 0x0ed18000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8450-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 211>;
+			wakeup-parent = <&pdc>;
+
+			sdc2_default_state: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep_state: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_default: cci0-default-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio110", "gpio111";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio112", "gpio113";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio114", "gpio115";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_default: cci3-default-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci3_sleep: cci3-sleep-state {
+				/* SDA, SCL */
+				pins = "gpio208", "gpio209";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clkreqn";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clkreqn";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				pins = "gpio8", "gpio9";
+				function = "qup2";
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				pins = "gpio12", "gpio13";
+				function = "qup3";
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				pins = "gpio16", "gpio17";
+				function = "qup4";
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				pins = "gpio206", "gpio207";
+				function = "qup5";
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				pins = "gpio20", "gpio21";
+				function = "qup6";
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				pins = "gpio28", "gpio29";
+				function = "qup8";
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				pins = "gpio32", "gpio33";
+				function = "qup9";
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				pins = "gpio36", "gpio37";
+				function = "qup10";
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				pins = "gpio40", "gpio41";
+				function = "qup11";
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				pins = "gpio44", "gpio45";
+				function = "qup12";
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				pins = "gpio48", "gpio49";
+				function = "qup13";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+				pins = "gpio52", "gpio53";
+				function = "qup14";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				pins = "gpio56", "gpio57";
+				function = "qup15";
+			};
+
+			qup_i2c16_data_clk: qup-i2c16-data-clk-state {
+				pins = "gpio60", "gpio61";
+				function = "qup16";
+			};
+
+			qup_i2c17_data_clk: qup-i2c17-data-clk-state {
+				pins = "gpio64", "gpio65";
+				function = "qup17";
+			};
+
+			qup_i2c18_data_clk: qup-i2c18-data-clk-state {
+				pins = "gpio68", "gpio69";
+				function = "qup18";
+			};
+
+			qup_i2c19_data_clk: qup-i2c19-data-clk-state {
+				pins = "gpio72", "gpio73";
+				function = "qup19";
+			};
+
+			qup_i2c20_data_clk: qup-i2c20-data-clk-state {
+				pins = "gpio76", "gpio77";
+				function = "qup20";
+			};
+
+			qup_i2c21_data_clk: qup-i2c21-data-clk-state {
+				pins = "gpio80", "gpio81";
+				function = "qup21";
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0";
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0";
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio7";
+				function = "qup1";
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				pins = "gpio4", "gpio5", "gpio6";
+				function = "qup1";
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio11";
+				function = "qup2";
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				pins = "gpio8", "gpio9", "gpio10";
+				function = "qup2";
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio15";
+				function = "qup3";
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				pins = "gpio12", "gpio13", "gpio14";
+				function = "qup3";
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio19";
+				function = "qup4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				pins = "gpio16", "gpio17", "gpio18";
+				function = "qup4";
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio85";
+				function = "qup5";
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				pins = "gpio206", "gpio207", "gpio84";
+				function = "qup5";
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio23";
+				function = "qup6";
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				pins = "gpio20", "gpio21", "gpio22";
+				function = "qup6";
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio31";
+				function = "qup8";
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup8";
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio35";
+				function = "qup9";
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup9";
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio39";
+				function = "qup10";
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup10";
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio43";
+				function = "qup11";
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup11";
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio47";
+				function = "qup12";
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup12";
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio51";
+				function = "qup13";
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup13";
+			};
+
+			qup_spi14_cs: qup-spi14-cs-state {
+				pins = "gpio55";
+				function = "qup14";
+			};
+
+			qup_spi14_data_clk: qup-spi14-data-clk-state {
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup14";
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio59";
+				function = "qup15";
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup15";
+			};
+
+			qup_spi16_cs: qup-spi16-cs-state {
+				pins = "gpio63";
+				function = "qup16";
+			};
+
+			qup_spi16_data_clk: qup-spi16-data-clk-state {
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup16";
+			};
+
+			qup_spi17_cs: qup-spi17-cs-state {
+				pins = "gpio67";
+				function = "qup17";
+			};
+
+			qup_spi17_data_clk: qup-spi17-data-clk-state {
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup17";
+			};
+
+			qup_spi18_cs: qup-spi18-cs-state {
+				pins = "gpio71";
+				function = "qup18";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi18_data_clk: qup-spi18-data-clk-state {
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup18";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_cs: qup-spi19-cs-state {
+				pins = "gpio75";
+				function = "qup19";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi19_data_clk: qup-spi19-data-clk-state {
+				pins = "gpio72", "gpio73", "gpio74";
+				function = "qup19";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi20_cs: qup-spi20-cs-state {
+				pins = "gpio79";
+				function = "qup20";
+			};
+
+			qup_spi20_data_clk: qup-spi20-data-clk-state {
+				pins = "gpio76", "gpio77", "gpio78";
+				function = "qup20";
+			};
+
+			qup_spi21_cs: qup-spi21-cs-state {
+				pins = "gpio83";
+				function = "qup21";
+			};
+
+			qup_spi21_data_clk: qup-spi21-data-clk-state {
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup21";
+			};
+
+			qup_uart7_rx: qup-uart7-rx-state {
+				pins = "gpio26";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart7_tx: qup-uart7-tx-state {
+				pins = "gpio27";
+				function = "qup7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			qup_uart20_default: qup-uart20-default-state {
+				pins = "gpio76", "gpio77", "gpio78", "gpio79";
+				function = "qup20";
+			};
+		};
+
+		lpass_tlmm: pinctrl@3440000 {
+			compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+			reg = <0 0x03440000 0x0 0x20000>,
+			      <0 0x034d0000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		sram@146aa000 {
+			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
+			reg = <0 0x146aa000 0 0x1000>;
+			ranges = <0 0 0x146aa000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x0 0x17100000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17180000 0x0 0x200000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x17140000 0x0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0 0x20000000>;
+			reg = <0x0 0x17420000 0x0 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17421000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+			};
+
+			frame@17423000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17423000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17425000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17427000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17429000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x1742b000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x1742d000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x17a00000 0x0 0x10000>,
+			      <0x0 0x17a10000 0x0 0x10000>,
+			      <0x0 0x17a20000 0x0 0x10000>,
+			      <0x0 0x17a30000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  3>, <SLEEP_TCS   2>,
+					  <WAKE_TCS    2>, <CONTROL_TCS 0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8450-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8450-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp12 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp13 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp14 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8450-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sm8450-gem-noc";
+			reg = <0 0x19100000 0 0xbb800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,sm8450-llcc";
+			reg = <0 0x19200000 0 0x80000>, <0 0x19600000 0 0x80000>,
+			      <0 0x19300000 0 0x80000>, <0 0x19700000 0 0x80000>,
+			      <0 0x19a00000 0 0x80000>;
+			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+				    "llcc3_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ufs_mem_hc: ufshc@1d84000 {
+			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0 0x01d84000 0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			iommus = <&apps_smmu 0xe0 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_phy: phy@1d87000 {
+			compatible = "qcom,sm8450-qmp-ufs-phy";
+			reg = <0 0x01d87000 0 0x1c4>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			clock-names = "ref", "ref_aux", "qref";
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
+				 <&gcc GCC_UFS_0_CLKREF_EN>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+			status = "disabled";
+
+			ufs_mem_phy_lanes: phy@1d87400 {
+				reg = <0 0x01d87400 0 0x188>,
+				      <0 0x01d87600 0 0x200>,
+				      <0 0x01d87c00 0 0x200>,
+				      <0 0x01d87800 0 0x188>,
+				      <0 0x01d87a00 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8450-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x584 0x11>,
+				 <&apps_smmu 0x588 0x0>,
+				 <&apps_smmu 0x598 0x5>,
+				 <&apps_smmu 0x59a 0x0>,
+				 <&apps_smmu 0x59f 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8450-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x584 0x11>,
+				 <&apps_smmu 0x588 0x0>,
+				 <&apps_smmu 0x598 0x5>,
+				 <&apps_smmu 0x59a 0x0>,
+				 <&apps_smmu 0x59f 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr","cpu-sdhc";
+			iommus = <&apps_smmu 0x4a0 0x0>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+			bus-width = <4>;
+			dma-coherent;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0x0>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB3_0_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x0 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8450-nsp-noc";
+			reg = <0 0x320c0000 0 0x10000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8450-lpass-ag-noc";
+			reg = <0 0x03c40000 0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+	};
+
+	sound: sound {
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu7_middle_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-top-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu0_tj_cfg: tj-cfg {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpu-bottom-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu1_tj_cfg: tj-cfg {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu-crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cdsp0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp_0_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp_1_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp_2_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				ddr_config0: ddr0-config {
+					temperature = <90000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss0_config0: mdmss0-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss0_config1: mdmss0-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss1_config0: mdmss1-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss1_config1: mdmss1-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss2_config0: mdmss2-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss2_config1: mdmss2-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss3_config0: mdmss3-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss3_config1: mdmss3-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-cfg {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <19200000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
new file mode 100644
index 000000000..f29cce518
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -0,0 +1,862 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 MTP";
+	compatible = "qcom,sm8550-mtp", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-MTP";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC2", "MIC BIAS3",
+				"TX DMIC0", "MIC BIAS1",
+				"TX DMIC1", "MIC BIAS2",
+				"TX DMIC2", "MIC BIAS3",
+				"TX SWR_ADC1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p3>;
+		vdd-l12-supply = <&vreg_s6g_1p8>;
+		vdd-l15-supply = <&vreg_s6g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l3-supply = <&vreg_s4e_0p9>;
+
+		vreg_l3c_0p91: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p9>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p9>;
+		vdd-l2-supply = <&vreg_s4e_0p9>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p9: smps4 {
+			regulator-name = "vreg_s4e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p1: smps5 {
+			regulator-name = "vreg_s5e_1p1";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p9>;
+		vdd-l2-supply = <&vreg_s4e_0p9>;
+		vdd-l3-supply = <&vreg_s4e_0p9>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p91: ldo3 {
+			regulator-name = "vreg_l3f_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vdd-l1-supply = <&vreg_s4g_1p3>;
+		vdd-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p2: smps1 {
+			regulator-name = "vreg_s1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p8: smps2 {
+			regulator-name = "vreg_s2g_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p7: smps3 {
+			regulator-name = "vreg_s3g_0p7";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p3: smps4 {
+			regulator-name = "vreg_s4g_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p8: smps5 {
+			regulator-name = "vreg_s5g_0p8";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p8: smps6 {
+			regulator-name = "vreg_s6g_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2g_1p2: ldo2 {
+			regulator-name = "vreg_l2g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
+
+		vddio-supply = <&vreg_l12b_1p8>;
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_default_state>;
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_state>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p91>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio12";
+		function = "normal";
+		input-enable;
+		output-disable;
+		bias-pull-up;
+		power-source = <1>; /* 1.8 V */
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845 */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+
+	/* WSA8845 */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vccq2-supply = <&vreg_l3g_1p2>;
+	vccq2-max-microamp = <100>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p91>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
new file mode 100644
index 000000000..2c09ce8ae
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -0,0 +1,954 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8550 QRD";
+	compatible = "qcom,sm8550-qrd", "qcom,sm8550";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-QRD";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC2", "MIC BIAS3",
+				"TX DMIC0", "MIC BIAS1",
+				"TX DMIC1", "MIC BIAS2",
+				"TX DMIC2", "MIC BIAS3",
+				"TX SWR_ADC1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* ldo2 supplies SM8550 VDD_LPI_MX */
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-retimer@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+};
+
+&gcc {
+	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
+		 <&pcie0_phy>,
+		 <&pcie1_phy>,
+		 <0>,
+		 <&ufs_mem_phy 0>,
+		 <&ufs_mem_phy 1>,
+		 <&ufs_mem_phy 2>,
+		 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+};
+
+&lpass_tlmm {
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio17";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+		vddio-supply = <&vreg_l12b_1p8>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+};
+
+&pcie_1_phy_aux_clk {
+	status = "disabled";
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_flash {
+	status = "okay";
+
+	led-0 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_YELLOW>;
+		led-sources = <1>, <4>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <0>;
+	};
+
+	led-1 {
+		function = LED_FUNCTION_FLASH;
+		color = <LED_COLOR_ID_WHITE>;
+		led-sources = <2>, <3>;
+		led-max-microamp = <500000>;
+		flash-max-microamp = <2000000>;
+		flash-max-timeout-us = <1280000>;
+		function-enumerator = <1>;
+	};
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pcie_1_phy_aux_clk {
+	clock-frequency = <1000>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/adsp.mbn",
+			"qcom/sm8550/adsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/cdsp.mbn",
+			"qcom/sm8550/cdsp_dtb.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sm8550/modem.mbn",
+			"qcom/sm8550/modem_dtb.mbn";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&swr0 {
+	status = "okay";
+
+	/* WSA8845, Speaker North */
+	north_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+
+	/* WSA8845, Speaker South */
+	south_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l3g_1p2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio108";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vccq2-supply = <&vreg_l3g_1p2>;
+	vccq2-max-microamp = <100>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_dp_in {
+	remote-endpoint = <&mdss_dp0_out>;
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
new file mode 100644
index 000000000..3a228d4f0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -0,0 +1,5319 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+#include <dt-bindings/clock/qcom,sm8550-gcc.h>
+#include <dt-bindings/clock/qcom,sm8550-gpucc.h>
+#include <dt-bindings/clock/qcom,sm8550-tcsr.h>
+#include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		bi_tcxo_div2: bi-tcxo-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+			clock-mult = <1>;
+			clock-div = <2>;
+		};
+
+		pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0 0>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			#cooling-cells = <2>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+				L3_0: l3-cache {
+					compatible = "cache";
+					cache-level = <3>;
+					cache-unified;
+				};
+			};
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0 0x100>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			#cooling-cells = <2>;
+			L2_100: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a510";
+			reg = <0 0x200>;
+			clocks = <&cpufreq_hw 0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 0>;
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <100>;
+			#cooling-cells = <2>;
+			L2_200: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a715";
+			reg = <0 0x300>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_300: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a715";
+			reg = <0 0x400>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_400: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0 0x500>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_500: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a710";
+			reg = <0 0x600>;
+			clocks = <&cpufreq_hw 1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 1>;
+			capacity-dmips-mhz = <1792>;
+			dynamic-power-coefficient = <270>;
+			#cooling-cells = <2>;
+			L2_600: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-x3";
+			reg = <0 0x700>;
+			clocks = <&cpufreq_hw 2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
+			qcom,freq-domain = <&cpufreq_hw 2>;
+			capacity-dmips-mhz = <1894>;
+			dynamic-power-coefficient = <588>;
+			#cooling-cells = <2>;
+			L2_700: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-unified;
+				next-level-cache = <&L3_0>;
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+
+				core4 {
+					cpu = <&CPU4>;
+				};
+
+				core5 {
+					cpu = <&CPU5>;
+				};
+
+				core6 {
+					cpu = <&CPU6>;
+				};
+
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <550>;
+				exit-latency-us = <750>;
+				min-residency-us = <6700>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1300>;
+				min-residency-us = <8136>;
+				local-timer-stop;
+			};
+
+			PRIME_CPU_SLEEP_0: cpu-sleep-2-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "goldplus-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <500>;
+				exit-latency-us = <1350>;
+				min-residency-us = <7480>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <750>;
+				exit-latency-us = <2350>;
+				min-residency-us = <9144>;
+			};
+
+			CLUSTER_SLEEP_1: cluster-sleep-1 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x4100c344>;
+				entry-latency-us = <2800>;
+				exit-latency-us = <4400>;
+				min-residency-us = <10150>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-sm8550", "qcom,scm";
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+		};
+	};
+
+	clk_virt: interconnect-0 {
+		compatible = "qcom,sm8550-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect-1 {
+		compatible = "qcom,sm8550-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	memory@a0000000 {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the size */
+		reg = <0 0xa0000000 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		CPU_PD0: power-domain-cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: power-domain-cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: power-domain-cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: power-domain-cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&PRIME_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hyp_mem: hyp-region@80000000 {
+			reg = <0 0x80000000 0 0xa00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-region@80a00000 {
+			reg = <0 0x80a00000 0 0x400000>;
+			no-map;
+		};
+
+		hyp_tags_mem: hyp-tags-region@80e00000 {
+			reg = <0 0x80e00000 0 0x3d0000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc-region@d8100000 {
+			reg = <0 0xd8100000 0 0x40000>;
+			no-map;
+		};
+
+		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
+			reg = <0 0x811d0000 0 0x30000>;
+			no-map;
+		};
+
+		/* merged xbl_dt_log, xbl_ramdump, aop_image */
+		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_cmd_db_mem: aop-cmd-db-region@81c60000 {
+			compatible = "qcom,cmd-db";
+			reg = <0 0x81c60000 0 0x20000>;
+			no-map;
+		};
+
+		/* merged aop_config, tme_crash_dump, tme_log, uefi_log */
+		aop_config_merged_mem: aop-config-merged-region@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		/* secdata region can be reused by apps */
+		smem: smem@81d00000 {
+			compatible = "qcom,smem";
+			reg = <0 0x81d00000 0 0x200000>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		adsp_mhi_mem: adsp-mhi-region@81f00000 {
+			reg = <0 0x81f00000 0 0x20000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync-region@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat-region@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap_mem: cdsp-secure-heap-region@82800000 {
+			reg = <0 0x82800000 0 0x4600000>;
+			no-map;
+		};
+
+		mpss_mem: mpss-region@8a800000 {
+			reg = <0 0x8a800000 0 0x10800000>;
+			no-map;
+		};
+
+		q6_mpss_dtb_mem: q6-mpss-dtb-region@9b000000 {
+			reg = <0 0x9b000000 0 0x80000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw-region@9b080000 {
+			reg = <0 0x9b080000 0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi-region@9b090000 {
+			reg = <0 0x9b090000 0 0xa000>;
+			no-map;
+		};
+
+		gpu_micro_code_mem: gpu-micro-code-region@9b09a000 {
+			reg = <0 0x9b09a000 0 0x2000>;
+			no-map;
+		};
+
+		spss_region_mem: spss-region@9b100000 {
+			reg = <0 0x9b100000 0 0x180000>;
+			no-map;
+		};
+
+		/* First part of the "SPU secure shared memory" region */
+		spu_tz_shared_mem: spu-tz-shared-region@9b280000 {
+			reg = <0 0x9b280000 0 0x60000>;
+			no-map;
+		};
+
+		/* Second part of the "SPU secure shared memory" region */
+		spu_modem_shared_mem: spu-modem-shared-region@9b2e0000 {
+			reg = <0 0x9b2e0000 0 0x20000>;
+			no-map;
+		};
+
+		camera_mem: camera-region@9b300000 {
+			reg = <0 0x9b300000 0 0x800000>;
+			no-map;
+		};
+
+		video_mem: video-region@9bb00000 {
+			reg = <0 0x9bb00000 0 0x700000>;
+			no-map;
+		};
+
+		cvp_mem: cvp-region@9c200000 {
+			reg = <0 0x9c200000 0 0x700000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp-region@9c900000 {
+			reg = <0 0x9c900000 0 0x2000000>;
+			no-map;
+		};
+
+		q6_cdsp_dtb_mem: q6-cdsp-dtb-region@9e900000 {
+			reg = <0 0x9e900000 0 0x80000>;
+			no-map;
+		};
+
+		q6_adsp_dtb_mem: q6-adsp-dtb-region@9e980000 {
+			reg = <0 0x9e980000 0 0x80000>;
+			no-map;
+		};
+
+		adspslpi_mem: adspslpi-region@9ea00000 {
+			reg = <0 0x9ea00000 0 0x4080000>;
+			no-map;
+		};
+
+		/* uefi region can be reused by apps */
+
+		/* Linux kernel image is loaded at 0xa8000000 */
+
+		rmtfs_mem: rmtfs-region@d4a80000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xd4a80000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		mpss_dsm_mem: mpss-dsm-region@d4d00000 {
+			reg = <0 0xd4d00000 0 0x3300000>;
+			no-map;
+		};
+
+		tz_reserved_mem: tz-reserved-region@d8000000 {
+			reg = <0 0xd8000000 0 0x100000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw-region@d8140000 {
+			reg = <0 0xd8140000 0 0x1c0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee-region@d8300000 {
+			reg = <0 0xd8300000 0 0x500000>;
+			no-map;
+		};
+
+		ta_mem: ta-region@d8800000 {
+			reg = <0 0xd8800000 0 0x8a00000>;
+			no-map;
+		};
+
+		tz_tags_mem: tz-tags-region@e1200000 {
+			reg = <0 0xe1200000 0 0x2740000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0 0xe6440000 0 0x279000>;
+			no-map;
+		};
+
+		trust_ui_vm_mem: trust-ui-vm-region@f3600000 {
+			reg = <0 0xf3600000 0 0x4aee000>;
+			no-map;
+		};
+
+		trust_ui_vm_dump: trust-ui-vm-dump-region@f80ee000 {
+			reg = <0 0xf80ee000 0 0x1000>;
+			no-map;
+		};
+
+		trust_ui_vm_qrtr: trust-ui-vm-qrt-region@f80ef000 {
+			reg = <0 0xf80ef000 0 0x9000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk0_ring: trust-ui-vm-vblk0-ring-region@f80f8000 {
+			reg = <0 0xf80f8000 0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_vblk1_ring: trust-ui-vm-vblk1-ring-region@f80fc000 {
+			reg = <0 0xf80fc000 0 0x4000>;
+			no-map;
+		};
+
+		trust_ui_vm_swiotlb: trust-ui-vm-swiotlb-region@f8100000 {
+			reg = <0 0xf8100000 0 0x100000>;
+			no-map;
+		};
+
+		oem_vm_mem: oem-vm-region@f8400000 {
+			reg = <0 0xf8400000 0 0x4800000>;
+			no-map;
+		};
+
+		oem_vm_vblk0_ring: oem-vm-vblk0-ring-region@fcc00000 {
+			reg = <0 0xfcc00000 0 0x4000>;
+			no-map;
+		};
+
+		oem_vm_swiotlb: oem-vm-swiotlb-region@fcc04000 {
+			reg = <0 0xfcc04000 0 0x100000>;
+			no-map;
+		};
+
+		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
+			reg = <0 0xfce00000 0 0x2900000>;
+			no-map;
+		};
+
+		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
+			reg = <0 0xff700000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,sm8550-gcc";
+			reg = <0 0x00100000 0 0x1f4200>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&bi_tcxo_div2>, <&sleep_clk>,
+				 <&pcie0_phy>,
+				 <&pcie1_phy>,
+				 <&pcie_1_phy_aux_clk>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
+				 <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
+		};
+
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3e>;
+			iommus = <&apps_smmu 0x436 0>;
+			status = "disabled";
+		};
+
+		qupv3_id_1: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x008c0000 0 0x2000>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			iommus = <&apps_smmu 0x423 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c8: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_data_clk>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi8: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_data_clk>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi9: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_data_clk>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi10: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_data_clk>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi11: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_data_clk>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi12: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_data_clk>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi13: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_data_clk>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi15: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0089c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre2_noc MASTER_QUP_2 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		i2c_master_hub_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-i2c-master-hub";
+			reg = <0x0 0x009c0000 0x0 0x2000>;
+			clock-names = "s-ahb";
+			clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c_hub_0: i2c@980000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00980000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c0_data_clk>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_1: i2c@984000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00984000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c1_data_clk>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_2: i2c@988000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00988000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c2_data_clk>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_3: i2c@98c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x0098c000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c3_data_clk>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_4: i2c@990000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0x0 0x00990000 0x0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c4_data_clk>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_5: i2c@994000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c5_data_clk>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_6: i2c@998000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c6_data_clk>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_7: i2c@99c000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c7_data_clk>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_8: i2c@9a0000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a0000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c8_data_clk>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
+			i2c_hub_9: i2c@9a4000 {
+				compatible = "qcom,geni-i2c-master-hub";
+				reg = <0 0x009a4000 0 0x4000>;
+				clock-names = "se", "core";
+				clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hub_i2c9_data_clk>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+		};
+
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+			#dma-cells = <3>;
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x1e>;
+			iommus = <&apps_smmu 0xb6 0>;
+			status = "disabled";
+		};
+
+		qupv3_id_0: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0 0x00ac0000 0 0x2000>;
+			ranges;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			iommus = <&apps_smmu 0xa3 0>;
+			interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+			interconnect-names = "qup-core";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			i2c0: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_data_clk>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi0: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_data_clk>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi1: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_data_clk>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi2: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_data_clk>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi3: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_data_clk>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			spi4: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_data_clk>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_data_clk>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a98000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt  SLAVE_EBI1 0>;
+				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart7: serial@a9c000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00a9c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart7_default>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interconnect-names = "qup-core", "qup-config";
+				interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
+				status = "disabled";
+			};
+		};
+
+		cnoc_main: interconnect@1500000 {
+			compatible = "qcom,sm8550-cnoc-main";
+			reg = <0 0x01500000 0 0x13080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1600000 {
+			compatible = "qcom,sm8550-config-noc";
+			reg = <0 0x01600000 0 0x6200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8550-system-noc";
+			reg = <0 0x01680000 0 0x1d080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8550-pcie-anoc";
+			reg = <0 0x016c0000 0 0x12200>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8550-aggre1-noc";
+			reg = <0 0x016e0000 0 0x14400>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8550-aggre2-noc";
+			reg = <0 0x01700000 0 0x1e400>;
+			#interconnect-cells = <2>;
+			clocks = <&rpmhcc RPMH_IPA_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1780000 {
+			compatible = "qcom,sm8550-mmss-noc";
+			reg = <0 0x01780000 0 0x5b800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8550";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie1: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8550";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <1>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1480 0x1>,
+				    <0x100 &apps_smmu 0x1481 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				<&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci", "link_down";
+
+			power-domains = <&gcc PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c0e000 {
+			compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref", "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+				 <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy", "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x0 0x01dc4000 0x0 0x28000>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x481 0x0>;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8550-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0x0 0x01dfa000 0x0 0x6000>;
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+			iommus = <&apps_smmu 0x480 0x0>,
+				 <&apps_smmu 0x481 0x0>;
+			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "memory";
+		};
+
+		ufs_mem_phy: phy@1d80000 {
+			compatible = "qcom,sm8550-qmp-ufs-phy";
+			reg = <0x0 0x01d80000 0x0 0x2000>;
+			clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+			clock-names = "ref", "ref_aux";
+
+			power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		ufs_mem_hc: ufs@1d84000 {
+			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x0 0x01d84000 0x0 0x3000>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufs_mem_phy>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			#reset-cells = <1>;
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			power-domains = <&gcc UFS_PHY_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			iommus = <&apps_smmu 0x60 0x0>;
+			dma-coherent;
+
+			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+			clock-names = "core_clk",
+				      "bus_aggr_clk",
+				      "iface_clk",
+				      "core_clk_unipro",
+				      "ref_clk",
+				      "tx_lane0_sync_clk",
+				      "rx_lane0_sync_clk",
+				      "rx_lane1_sync_clk";
+			clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_UFS_PHY_AHB_CLK>,
+				 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				 <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+				 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<75000000 300000000>,
+				<0 0>,
+				<0 0>,
+				<75000000 300000000>,
+				<100000000 403000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+			qcom,ice = <&ice>;
+
+			status = "disabled";
+		};
+
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8550-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0 0x01f40000 0 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: clock-controller@1fc0000 {
+			compatible = "qcom,sm8550-tcsr", "syscon";
+			reg = <0 0x01fc0000 0 0x30000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8550-gpucc";
+			reg = <0 0x03d90000 0 0xa000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8550-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MSS>;
+			power-domain-names = "cx", "mss";
+
+			interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, <&mpss_dsm_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+			};
+		};
+
+		lpass_wsa2macro: codec@6aa0000 {
+			compatible = "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06aa0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "wsa2-mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa2_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr3: soundwire-controller@6ab0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ab0000 0 0x10000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa2macro>;
+			clock-names = "iface";
+			label = "WSA2";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_rxmacro: codec@6ac0000 {
+			compatible = "qcom,sm8550-lpass-rx-macro";
+			reg = <0 0x06ac0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr1: soundwire-controller@6ad0000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06ad0000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_rxmacro>;
+			clock-names = "iface";
+			label = "RX";
+
+			qcom,din-ports = <0>;
+			qcom,dout-ports = <10>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_txmacro: codec@6ae0000 {
+			compatible = "qcom,sm8550-lpass-tx-macro";
+			reg = <0 0x06ae0000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_wsamacro: codec@6b00000 {
+			compatible = "qcom,sm8550-lpass-wsa-macro";
+			reg = <0 0x06b00000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_vamacro>;
+			clock-names = "mclk", "macro", "dcodec", "fsgen";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire-controller@6b10000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06b10000 0 0x10000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsamacro>;
+			clock-names = "iface";
+			label = "WSA";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <9>;
+
+			qcom,ports-sinterval =		/bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>;
+			qcom,ports-offset1 =		/bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>;
+			qcom,ports-offset2 =		/bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		swr2: soundwire-controller@6d30000 {
+			compatible = "qcom,soundwire-v2.0.0";
+			reg = <0 0x06d30000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "core", "wakeup";
+			clocks = <&lpass_txmacro>;
+			clock-names = "iface";
+			label = "TX";
+
+			qcom,din-ports = <4>;
+			qcom,dout-ports = <0>;
+			qcom,ports-sinterval-low =	/bits/ 8 <0x01 0x01 0x03 0x03>;
+			qcom,ports-offset1 =		/bits/ 8 <0x00 0x00 0x01 0x01>;
+			qcom,ports-offset2 =		/bits/ 8 <0x00 0x00 0x00 0x00>;
+			qcom,ports-hstart =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop =		/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
+			qcom,ports-lane-control =	/bits/ 8 <0x01 0x02 0x00 0x00>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		lpass_vamacro: codec@6d44000 {
+			compatible = "qcom,sm8550-lpass-va-macro";
+			reg = <0 0x06d44000 0 0x1000>;
+			clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "mclk", "macro", "dcodec";
+
+			assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			assigned-clock-rates = <19200000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>,
+			      <0 0x07250000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+
+			tx_swr_active: tx-swr-active-state {
+				clk-pins {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_active: rx-swr-active-state {
+				clk-pins {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			dmic01_default: dmic01-default-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			dmic02_default: dmic02-default-state {
+				clk-pins {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+
+			wsa_swr_active: wsa-swr-active-state {
+				clk-pins {
+					pins = "gpio10";
+					function = "wsa_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio11";
+					function = "wsa_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			wsa2_swr_active: wsa2-swr-active-state {
+				clk-pins {
+					pins = "gpio15";
+					function = "wsa2_swr_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data-pins {
+					pins = "gpio16";
+					function = "wsa2_swr_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+		};
+
+		lpass_lpiaon_noc: interconnect@7400000 {
+			compatible = "qcom,sm8550-lpass-lpiaon-noc";
+			reg = <0 0x07400000 0 0x19080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_lpicx_noc: interconnect@7430000 {
+			compatible = "qcom,sm8550-lpass-lpicx-noc";
+			reg = <0 0x07430000 0 0x3a200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@7e40000 {
+			compatible = "qcom,sm8550-lpass-ag-noc";
+			reg = <0 0x07e40000 0 0xe080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		sdhc_2: mmc@8804000 {
+			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0 0x08804000 0 0x1000>;
+
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "core", "xo";
+			iommus = <&apps_smmu 0x540 0>;
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+			interconnect-names = "sdhc-ddr", "cpu-sdhc";
+			bus-width = <4>;
+			dma-coherent;
+
+			/* Forbid SDR104/SDR50 - broken hw! */
+			sdhci-caps-mask = <0x3 0>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8550-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sm8550-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_HF_AXI_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+					<&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x1c00 0x2>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sm8550-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_DISP_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+
+				operating-points-v2 = <&mdp_opp_table>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dp0_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-325000000 {
+						opp-hz = /bits/ 64 <325000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-514000000 {
+						opp-hz = /bits/ 64 <514000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dp0: displayport-controller@ae90000 {
+				compatible = "qcom,sm8550-dp", "qcom,sm8350-dp";
+				reg = <0 0xae90000 0 0x200>,
+				      <0 0xae90200 0 0x200>,
+				      <0 0xae90400 0 0xc00>,
+				      <0 0xae91000 0 0x400>,
+				      <0 0xae91400 0 0x400>;
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dp0_out: endpoint {
+						};
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-162000000 {
+						opp-hz = /bits/ 64 <162000000>;
+						required-opps = <&rpmhpd_opp_low_svs_d1>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi0_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae95000 {
+				compatible = "qcom,sm8550-dsi-phy-4nm";
+				reg = <0 0x0ae95000 0 0x200>,
+				      <0 0x0ae95200 0 0x280>,
+				      <0 0x0ae95500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+
+				phys = <&mdss_dsi1_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae97000 {
+				compatible = "qcom,sm8550-dsi-phy-4nm";
+				reg = <0 0x0ae97000 0 0x200>,
+				      <0 0x0ae97200 0 0x280>,
+				      <0 0x0ae97500 0 0x400>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8550-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+				 <0>, /* dp1 */
+				 <0>,
+				 <0>, /* dp2 */
+				 <0>,
+				 <0>, /* dp3 */
+				 <0>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8550-snps-eusb2-phy";
+			reg = <0x0 0x088e3000 0x0 0x154>;
+			#phy-cells = <0>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8550-qmp-usb3-dp-phy";
+			reg = <0x0 0x088e8000 0x0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "hs_phy_irq",
+					  "ss_phy_irq",
+					  "dm_hs_phy_irq",
+					  "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
+			status = "disabled";
+
+			usb_1_dwc3: usb@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a600000 0x0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x40 0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				snps,usb3_lpm_capable;
+				phys = <&usb_1_hsphy>,
+				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
+			};
+		};
+
+		pdc: interrupt-controller@b220000 {
+			compatible = "qcom,sm8550-pdc", "qcom,pdc";
+			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
+			qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+					  <125 63 1>, <126 716 12>,
+					  <138 251 5>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupt-controller;
+		};
+
+		tsens0: thermal-sensor@c271000 {
+			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c271000 0 0x1000>, /* TM */
+			      <0 0x0c222000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c272000 {
+			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c272000 0 0x1000>, /* TM */
+			      <0 0x0c223000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens2: thermal-sensor@c273000 {
+			compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c273000 0 0x1000>, /* TM */
+			      <0 0x0c224000 0 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		aoss_qmp: power-management@c300000 {
+			compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupt-parent = <&ipcc>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0 0x0c3f0000 0 0x400>;
+		};
+
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0 0x0c400000 0 0x3000>,
+			      <0 0x0c500000 0 0x4000000>,
+			      <0 0x0c440000 0 0x80000>,
+			      <0 0x0c4c0000 0 0x20000>,
+			      <0 0x0c42d000 0 0x4000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8550-tlmm";
+			reg = <0 0x0f100000 0 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 211>;
+			wakeup-parent = <&pdc>;
+
+			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio16", "gpio17";
+				function = "i2chub0_se0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio18", "gpio19";
+				function = "i2chub0_se1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio20", "gpio21";
+				function = "i2chub0_se2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio22", "gpio23";
+				function = "i2chub0_se3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio4", "gpio5";
+				function = "i2chub0_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio6", "gpio7";
+				function = "i2chub0_se5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio8", "gpio9";
+				function = "i2chub0_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio10", "gpio11";
+				function = "i2chub0_se7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio206", "gpio207";
+				function = "i2chub0_se8";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio84", "gpio85";
+				function = "i2chub0_se9";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			pcie0_default_state: pcie0-default-state {
+				perst-pins {
+					pins = "gpio94";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio95";
+					function = "pcie0_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio96";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			pcie1_default_state: pcie1-default-state {
+				perst-pins {
+					pins = "gpio97";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				clkreq-pins {
+					pins = "gpio98";
+					function = "pcie1_clk_req_n";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				wake-pins {
+					pins = "gpio99";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio28", "gpio29";
+				function = "qup1_se0";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio36", "gpio37";
+				function = "qup1_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio40", "gpio41";
+				function = "qup1_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio44", "gpio45";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio52", "gpio53";
+				function = "qup1_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio48", "gpio49";
+				function = "qup1_se6";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+				scl-pins {
+					pins = "gpio57";
+					function = "qup2_se0_l1_mira";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+
+				sda-pins {
+					pins = "gpio56";
+					function = "qup2_se0_l0_mira";
+					drive-strength = <2>;
+					bias-pull-up = <2200>;
+				};
+			};
+
+			qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio60", "gpio61";
+				function = "qup2_se1";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio64", "gpio65";
+				function = "qup2_se2";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio68", "gpio69";
+				function = "qup2_se3";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio2", "gpio3";
+				function = "qup2_se4";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio80", "gpio81";
+				function = "qup2_se5";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_i2c15_data_clk: qup-i2c15-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio72", "gpio106";
+				function = "qup2_se7";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio31";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio28", "gpio29", "gpio30";
+				function = "qup1_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_cs: qup-spi1-cs-state {
+				pins = "gpio35";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi1_data_clk: qup-spi1-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio32", "gpio33", "gpio34";
+				function = "qup1_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_cs: qup-spi2-cs-state {
+				pins = "gpio39";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi2_data_clk: qup-spi2-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio36", "gpio37", "gpio38";
+				function = "qup1_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_cs: qup-spi3-cs-state {
+				pins = "gpio43";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi3_data_clk: qup-spi3-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio40", "gpio41", "gpio42";
+				function = "qup1_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_cs: qup-spi4-cs-state {
+				pins = "gpio47";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi4_data_clk: qup-spi4-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio44", "gpio45", "gpio46";
+				function = "qup1_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_cs: qup-spi5-cs-state {
+				pins = "gpio55";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi5_data_clk: qup-spi5-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio52", "gpio53", "gpio54";
+				function = "qup1_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_cs: qup-spi6-cs-state {
+				pins = "gpio51";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi6_data_clk: qup-spi6-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio48", "gpio49", "gpio50";
+				function = "qup1_se6";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_cs: qup-spi8-cs-state {
+				pins = "gpio59";
+				function = "qup2_se0_l3_mira";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi8_data_clk: qup-spi8-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio56", "gpio57", "gpio58";
+				function = "qup2_se0_l2_mira";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_cs: qup-spi9-cs-state {
+				pins = "gpio63";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi9_data_clk: qup-spi9-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio60", "gpio61", "gpio62";
+				function = "qup2_se1";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_cs: qup-spi10-cs-state {
+				pins = "gpio67";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi10_data_clk: qup-spi10-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio64", "gpio65", "gpio66";
+				function = "qup2_se2";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_cs: qup-spi11-cs-state {
+				pins = "gpio71";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi11_data_clk: qup-spi11-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio68", "gpio69", "gpio70";
+				function = "qup2_se3";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_cs: qup-spi12-cs-state {
+				pins = "gpio119";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi12_data_clk: qup-spi12-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio2", "gpio3", "gpio118";
+				function = "qup2_se4";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_cs: qup-spi13-cs-state {
+				pins = "gpio83";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi13_data_clk: qup-spi13-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio80", "gpio81", "gpio82";
+				function = "qup2_se5";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_cs: qup-spi15-cs-state {
+				pins = "gpio75";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi15_data_clk: qup-spi15-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio72", "gpio106", "gpio74";
+				function = "qup2_se7";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_uart7_default: qup-uart7-default-state {
+				/* TX, RX */
+				pins = "gpio26", "gpio27";
+				function = "qup1_se7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+		};
+
+		apps_smmu: iommu@15000000 {
+			compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0 0x15000000 0 0x100000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		intc: interrupt-controller@17100000 {
+			compatible = "arm,gic-v3";
+			reg = <0 0x17100000 0 0x10000>,		/* GICD */
+			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
+			ranges;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0 0x40000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			gic_its: msi-controller@17140000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0 0x17140000 0 0x20000>;
+				msi-controller;
+				#msi-cells = <1>;
+			};
+		};
+
+		timer@17420000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0 0x17420000 0 0x1000>;
+			ranges = <0 0 0 0x20000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@17421000 {
+				reg = <0x17421000 0x1000>,
+				      <0x17422000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@17423000 {
+				reg = <0x17423000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17425000 {
+				reg = <0x17425000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17427000 {
+				reg = <0x17427000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@17429000 {
+				reg = <0x17429000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742b000 {
+				reg = <0x1742b000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@1742d000 {
+				reg = <0x1742d000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		apps_rsc: rsc@17a00000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0 0x17a00000 0 0x10000>,
+			      <0 0x17a10000 0 0x10000>,
+			      <0 0x17a20000 0 0x10000>,
+			      <0 0x17a30000 0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
+					  <WAKE_TCS      2>, <CONTROL_TCS   0>;
+			power-domains = <&CLUSTER_PD>;
+
+			apps_bcm_voter: bcm-voter {
+				compatible = "qcom,bcm-voter";
+			};
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8550-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8550-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp-16 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp-48 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_d2: opp-52 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
+					};
+
+					rpmhpd_opp_low_svs_d1: opp-56 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+					};
+
+					rpmhpd_opp_low_svs_d0: opp-60 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
+					};
+
+					rpmhpd_opp_low_svs: opp-64 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_low_svs_l1: opp-80 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs: opp-128 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l0: opp-144 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+					};
+
+					rpmhpd_opp_svs_l1: opp-192 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp-256 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp-320 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp-336 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp-384 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp-416 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
+
+		cpufreq_hw: cpufreq@17d91000 {
+			compatible = "qcom,sm8550-cpufreq-epss", "qcom,cpufreq-epss";
+			reg = <0 0x17d91000 0 0x1000>,
+			      <0 0x17d92000 0 0x1000>,
+			      <0 0x17d93000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
+			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		pmu@24091000 {
+			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+			reg = <0 0x24091000 0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <2086000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2929000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5931000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6515000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <7980000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <10437000>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <12157000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <14060000>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <16113000>;
+				};
+			};
+		};
+
+		pmu@240b6400 {
+			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0 0x240b6400 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <4577000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <7110000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <9155000>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <12298000>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <14236000>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <16265000>;
+				};
+			};
+		};
+
+		gem_noc: interconnect@24100000 {
+			compatible = "qcom,sm8550-gem-noc";
+			reg = <0 0x24100000 0 0xbb800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@25000000 {
+			compatible = "qcom,sm8550-llcc";
+			reg = <0 0x25000000 0 0x200000>,
+			      <0 0x25200000 0 0x200000>,
+			      <0 0x25400000 0 0x200000>,
+			      <0 0x25600000 0 0x200000>,
+			      <0 0x25800000 0 0x200000>;
+			reg-names = "llcc0_base",
+				    "llcc1_base",
+				    "llcc2_base",
+				    "llcc3_base",
+				    "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8550-adsp-pas";
+			reg = <0x0 0x30000000 0x0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_LCX>,
+					<&rpmhpd RPMHPD_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1003 0x80>,
+							 <&apps_smmu 0x1063 0x0>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1004 0x80>,
+							 <&apps_smmu 0x1064 0x0>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1005 0x80>,
+							 <&apps_smmu 0x1065 0x0>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1006 0x80>,
+							 <&apps_smmu 0x1066 0x0>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1007 0x80>,
+							 <&apps_smmu 0x1067 0x0>;
+					};
+				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
+			};
+		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8550-nsp-noc";
+			reg = <0 0x320c0000 0 0xe080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8550-cdsp-pas";
+			reg = <0x0 0x32300000 0x0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_NSP>;
+			power-domain-names = "cx", "mxc", "nsp";
+
+			interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+			memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1961 0x0>,
+							 <&apps_smmu 0x0c01 0x20>,
+							 <&apps_smmu 0x19c1 0x10>;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1962 0x0>,
+							 <&apps_smmu 0x0c02 0x20>,
+							 <&apps_smmu 0x19c2 0x10>;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1963 0x0>,
+							 <&apps_smmu 0x0c03 0x20>,
+							 <&apps_smmu 0x19c3 0x10>;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1964 0x0>,
+							 <&apps_smmu 0x0c04 0x20>,
+							 <&apps_smmu 0x19c4 0x10>;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1965 0x0>,
+							 <&apps_smmu 0x0c05 0x20>,
+							 <&apps_smmu 0x19c5 0x10>;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1966 0x0>,
+							 <&apps_smmu 0x0c06 0x20>,
+							 <&apps_smmu 0x19c6 0x10>;
+					};
+
+					compute-cb@7 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <7>;
+						iommus = <&apps_smmu 0x1967 0x0>,
+							 <&apps_smmu 0x0c07 0x20>,
+							 <&apps_smmu 0x19c7 0x10>;
+					};
+
+					compute-cb@8 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <8>;
+						iommus = <&apps_smmu 0x1968 0x0>,
+							 <&apps_smmu 0x0c08 0x20>,
+							 <&apps_smmu 0x19c8 0x10>;
+					};
+
+					/* note: secure cb9 in downstream */
+				};
+			};
+		};
+	};
+
+	thermal-zones {
+		aoss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpuss3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu3-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu3_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu3_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-middle-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_middle_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_middle_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu-critical {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cdsp0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp0_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp1_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp2_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cdsp3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				cdsp3_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				ddr_config0: ddr0-config {
+					temperature = <90000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss0_config0: mdmss0-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss0_config1: mdmss0-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss1_config0: mdmss1-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss1_config1: mdmss1-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 12>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss2_config0: mdmss2-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss2_config1: mdmss2-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		modem3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 13>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				mdmss3_config0: mdmss3-config0 {
+					temperature = <102000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				mdmss3_config1: mdmss3-config1 {
+					temperature = <105000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 14>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		camera1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens1 15>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		aoss2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 0>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 1>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu0_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-1-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 2>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu1_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-2-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 3>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu2_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-3-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 4>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu3_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-4-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 5>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu4_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-5-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 6>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu5_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-6-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 7>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu6_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		gpuss-7-thermal {
+			polling-delay-passive = <10>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens2 8>;
+
+			trips {
+				thermal-engine-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				thermal-hal-config {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				reset-mon-config {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+
+				gpu7_junction_config: junction-config {
+					temperature = <95000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile
new file mode 100644
index 000000000..ef8d8fcba
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-xnano-x5.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-bpi-m4.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1395-lionskin.dtb
+
+dtb-$(CONFIG_ARCH_REALTEK) += rtd1619-mjolnir.dtb
diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
new file mode 100644
index 000000000..b2e44c6c2
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1293.dtsi"
+
+/ {
+	compatible = "synology,ds418j", "realtek,rtd1293";
+	model = "Synology DiskStation DS418j";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x3ffe1000>; /* boot ROM to 1 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
new file mode 100644
index 000000000..d0c9387ac
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1293 SoC
+ *
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+#include "rtd129x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1293";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>;
+};
+
+&gic {
+	interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
new file mode 100644
index 000000000..cf4a57c01
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-mele-v9.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "mele,v9", "realtek,rtd1295";
+	model = "MeLE V9";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
new file mode 100644
index 000000000..14161c3f3
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-probox2-ava.dts
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "probox2,ava", "realtek,rtd1295";
+	model = "PROBOX2 AVA";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts b/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
new file mode 100644
index 000000000..d7878ff94
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-xnano-x5.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "xnano,x5", "realtek,rtd1295";
+	model = "Xnano X5";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x3ffe1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
new file mode 100644
index 000000000..4beb37bb9
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1295.dtsi"
+
+/ {
+	compatible = "zidoo,x9s", "realtek,rtd1295";
+	model = "Zidoo X9S";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
new file mode 100644
index 000000000..b7f63102f
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1295 SoC
+ *
+ * Copyright (c) 2016-2019 Andreas Färber
+ */
+
+#include "rtd129x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1295";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
new file mode 100644
index 000000000..cc706d13d
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1296.dtsi"
+
+/ {
+	compatible = "synology,ds418", "realtek,rtd1296";
+	model = "Synology DiskStation DS418";
+
+	memory@1f000 {
+		device_type = "memory";
+		reg = <0x1f000 0x7ffe1000>; /* boot ROM to 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
new file mode 100644
index 000000000..4f805f576
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1296 SoC
+ *
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+#include "rtd129x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1296";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
new file mode 100644
index 000000000..39aefe66a
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1293/RTD1295/RTD1296 SoC
+ *
+ * Copyright (c) 2016-2019 Andreas Färber
+ */
+
+/memreserve/	0x0000000000000000 0x000000000001f000;
+/memreserve/	0x000000000001f000 0x00000000000e1000;
+/memreserve/	0x0000000001b00000 0x00000000004be000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1295.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@1f000 {
+			reg = <0x1f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+			 /* Exclude up to 2 GiB of RAM */
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1800>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1800>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x2000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x2000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,gic-400";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset4: reset-controller@50 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x50 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <27000000>;
+		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR1>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
new file mode 100644
index 000000000..9891967d1
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-bpi-m4.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+	compatible = "bananapi,bpi-m4", "realtek,rtd1395";
+	model = "Banana Pi BPI-M4";
+
+	memory@2f000 {
+		device_type = "memory";
+		reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts b/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
new file mode 100644
index 000000000..83f9b536c
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395-lionskin.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1395.dtsi"
+
+/ {
+	compatible = "realtek,lion-skin", "realtek,rtd1395";
+	model = "Realtek Lion Skin EVB";
+
+	memory@2f000 {
+		device_type = "memory";
+		reg = <0x2f000 0x3ffd1000>; /* boot ROM to 1 GiB or 2 GiB */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* debug console (J1) */
+&uart0 {
+	status = "okay";
+};
+
+/* M.2 slot (CON1) */
+&uart1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1395.dtsi b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
new file mode 100644
index 000000000..2efe5b25c
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1395.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include "rtd139x.dtsi"
+
+/ {
+	compatible = "realtek,rtd1395";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&arm_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd139x.dtsi b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
new file mode 100644
index 000000000..a3c10ceeb
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd139x.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1395 SoC family
+ *
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/memreserve/	0x0000000000000000 0x000000000002f000;
+/memreserve/	0x000000000002f000 0x00000000000d1000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1295.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@2f000 {
+			reg = <0x2f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	arm_pmu: arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0001f000>, /* boot ROM */
+			 <0x98000000 0x98000000 0x68000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x2000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x2000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,gic-400";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset4: reset-controller@50 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x50 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <27000000>;
+		resets = <&iso_reset RTD1295_ISO_RSTN_UR0>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR1>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <432000000>;
+		resets = <&reset2 RTD1295_RSTN_UR2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
new file mode 100644
index 000000000..90ed66814
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619-mjolnir.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1619.dtsi"
+
+/ {
+	compatible = "realtek,mjolnir", "realtek,rtd1619";
+	model = "Realtek Mjolnir EVB";
+
+	memory@2e000 {
+		device_type = "memory";
+		reg = <0x2e000 0x7ffd2000>; /* boot ROM to 2 GiB */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+};
+
+/* debug console (J1) */
+&uart0 {
+	status = "okay";
+};
+
+/* M.2 slot (CON4) */
+&uart1 {
+	status = "disabled";
+};
+
+/* GPIO connector (T1) */
+&uart2 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd1619.dtsi b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
new file mode 100644
index 000000000..e52bf708b
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd1619.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD1619 SoC
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ */
+
+#include "rtd16xx.dtsi"
+
+/ {
+	compatible = "realtek,rtd1619";
+};
diff --git a/arch/arm64/boot/dts/realtek/rtd16xx.dtsi b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
new file mode 100644
index 000000000..34802cc62
--- /dev/null
+++ b/arch/arm64/boot/dts/realtek/rtd16xx.dtsi
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Realtek RTD16xx SoC family
+ *
+ * Copyright (c) 2019 Realtek Semiconductor Corp.
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@2f000 {
+			reg = <0x2f000 0x1000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x1ffe000 0x4000>;
+		};
+
+		tee: tee@10100000 {
+			reg = <0x10100000 0xf00000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x400>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		cpu5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x500>;
+			enable-method = "psci";
+			next-level-cache = <&l3>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			next-level-cache = <&l3>;
+			cache-level = <2>;
+			cache-unified;
+
+		};
+
+		l3: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	arm_pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>,
+			<&cpu3>, <&cpu4>, <&cpu5>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "osc27M";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0002e000>, /* boot ROM */
+			 <0x98000000 0x98000000 0x68000000>;
+
+		rbus: bus@98000000 {
+			compatible = "simple-bus";
+			reg = <0x98000000 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000000 0x200000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff100000 {
+			compatible = "arm,gic-v3";
+			reg = <0xff100000 0x10000>,
+			      <0xff140000 0xc0000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&iso {
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <432000000>;
+		status = "disabled";
+	};
+
+	uart2: serial@400 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x400 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <432000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
new file mode 100644
index 000000000..7114cbbd8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-beacon-rzg2m-kit.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-beacon-rzg2n-kit.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb
+
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
+
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-beacon-rzg2h-kit.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex-mipi-2.1.dtb
+
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb
+
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980a-condor-i.dtb
+
+dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
+
+dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
+
+dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
+
+dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb
+
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk-ard-audio-da7212.dtbo
+
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
+
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
+
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
+
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc-cru-csi-ov5645.dtbo
+
+dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
+
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
+dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
new file mode 100644
index 000000000..7cb5c958a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/aistarvision-mipi-adapter-2.1.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the AISTARVISION MIPI Adapter V2.1
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	ov5645_vdddo_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vdda_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vddd_1v5: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	imx219_vana_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vana";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	imx219_vdig_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdig";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	imx219_vddl_1v2: 1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddl";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	osc25250_clk: osc25250_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&MIPI_OV5645_PARENT_I2C {
+	ov5645: ov5645@3c {
+		compatible = "ovti,ov5645";
+		reg = <0x3c>;
+		clocks = <&osc25250_clk>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&ov5645_vdddo_1v8>;
+		vdda-supply = <&ov5645_vdda_2v8>;
+		vddd-supply = <&ov5645_vddd_1v5>;
+
+		port {
+			ov5645_ep: endpoint {
+			};
+		};
+	};
+};
+
+&MIPI_IMX219_PARENT_I2C {
+	imx219: imx219@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&osc25250_clk>;
+		VANA-supply = <&imx219_vana_2v8>;
+		VDIG-supply = <&imx219_vdig_1v8>;
+		VDDL-supply = <&imx219_vddl_1v2>;
+
+		port {
+			imx219_ep: endpoint {
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
new file mode 100644
index 000000000..2e9927b97
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -0,0 +1,816 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/versaclock.h>
+
+/ {
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm2 0 25000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	backlight_dpi: backlight-dpi {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm0 0 25000>;
+		brightness-levels = <0 25 33 50 63 75 88 100>;
+		default-brightness-level = <6>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-1 { /* S19 */
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "Up";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 { /*S20 */
+			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "Left";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 { /* S21 */
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "Down";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 { /* S22 */
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "Right";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-5 { /* S23 */
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "Center";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led0 {
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+			linux,default-trigger = "heartbeat";
+		};
+		led1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	lvds {
+		compatible = "panel-lvds";
+		power-supply = <&reg_lcd_reset>;
+		width-mm = <223>;
+		height-mm = <125>;
+		backlight = <&backlight_lvds>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 800x480@60Hz */
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hsync-len = <48>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <13>;
+			vback-porch = <29>;
+			vsync-len = <1>;
+			hsync-active = <1>;
+			vsync-active = <3>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	rgb {
+		/* Different LCD with compatible timings */
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_dpi>;
+		enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd>;
+		port {
+			rgb_panel: endpoint {
+				remote-endpoint = <&du_out_rgb>;
+			};
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+
+	reg_cam0: regulator-cam0 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_cam1: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+		dais = <&rsnd_port0>, <&rsnd_port1>;
+		widgets = "Microphone", "Mic Jack",
+			  "Line", "Line In Jack",
+			  "Headphone", "Headphone Jack";
+		mic-det-gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		routing = "Headphone Jack", "HPOUTL",
+			 "Headphone Jack", "HPOUTR",
+			 "IN3R", "MICBIAS",
+			 "Mic Jack", "IN3R";
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	/* External DU dot clocks */
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+};
+
+&audio_clk_b {
+	clock-frequency = <22579200>;
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&du {
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&rgb_panel>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
+};
+
+&ehci1 {
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dw_hdmi0_in: endpoint {
+				remote-endpoint = <&du_out_hdmi0>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	gpio_exp2: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp3: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp4: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	versaclock6_bb: clock-controller@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+
+		assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
+				  <&versaclock6_bb 3>, <&versaclock6_bb 4>;
+		assigned-clock-rates = <24000000>, <24000000>, <24576000>,
+				       <24576000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&versaclock6_bb 3>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:Default */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:Default */
+			0x0000 /* 5:Default */
+		>;
+		port {
+			wm8962_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		wakeup-source;
+	};
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+
+	gpio_exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "lcd_reset", "lcd_pwr", "lcd_select",
+				  "backlight-enable", "Touch_shdwn",
+				  "LCD_H_pol", "lcd_V_pol";
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
+		function = "du";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	led_pins: leds {
+		/* GP_0_4 , AVS1, AVS2, GP_7_3 */
+		pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
+		bias-pull-down;
+	};
+
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
+		function = "msiof1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	pwm2_pins: pwm2 {
+		groups = "pwm2_a";
+		function = "pwm2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		mux {
+			groups = "usb0";
+			function = "usb0";
+		};
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+	};
+
+	usb30_pins: usb30 {
+		mux {
+			groups = "usb30";
+			function = "usb30";
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	/* Reference versaclock instead of audio_clk_a */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&versaclock6_bb 4>, <&audio_clk_b>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&wm8962_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi1>, <&dvc1>, <&src1>;
+				capture = <&ssi0>;
+			};
+		};
+		rsnd_port1: port@1 {
+		    reg = <0x01>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif5 {
+	pinctrl-0 = <&scif5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&tmu1 {
+	status = "okay";
+};
+
+&tmu2 {
+	status = "okay";
+};
+
+&tmu3 {
+	status = "okay";
+};
+
+&tmu4 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&vin0 {
+	status = "okay";
+};
+&vin1 {
+	status = "okay";
+};
+&vin2 {
+	status = "okay";
+};
+&vin3 {
+	status = "okay";
+};
+&vin4 {
+	status = "okay";
+};
+&vin5 {
+	status = "okay";
+};
+&vin6 {
+	status = "okay";
+};
+&vin7 {
+	status = "okay";
+};
+
+&xhci0
+{
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
new file mode 100644
index 000000000..68b04e56a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/versaclock.h>
+
+/ {
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	osc_32k: osc_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wlan_pwrseq: wlan_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	clocks = <&cpg CPG_MOD 812>, <&versaclock5 4>;
+	clock-names = "fck", "refclk";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb-hub-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		clock-names = "extclk";
+		max-speed = <4000000>;
+	};
+};
+
+&hscif2 {
+	status = "okay";
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_20_0",
+			"wl_reg_on",
+			"bt_reg_on",
+			"i2c4_20_3",
+			"i2c4_20_4",
+			"bt_dev_wake",
+			"i2c4_20_6",
+			"i2c4_20_7";
+	};
+
+	pca9654_lte: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_21_0",
+			"zoe_pwr_on",
+			"zoe_extint",
+			"zoe_reset_n",
+			"sara_reset",
+			"i2c4_21_5",
+			"sara_pwr_off",
+			"sara_networking_status";
+	};
+
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	versaclock5: versaclock_som@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
+		assigned-clocks = <&versaclock5 1>,
+				   <&versaclock5 2>,
+				   <&versaclock5 3>,
+				   <&versaclock5 4>;
+
+		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+
+		OUT1 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT2 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT3 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <1800000>;
+			idt,slew-percent = <100>;
+		};
+
+		OUT4 {
+			idt,mode = <VC5_CMOS>;
+			idt,voltage-microvolt = <3300000>;
+			idt,slew-percent = <100>;
+		};
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a";
+		function = "hscif2";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif5_pins: scif5 {
+		groups = "scif5_data_a";
+		function = "scif5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi2_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb2_clksel {
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+		  <&versaclock5 3>, <&usb3s0_clk>;
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
new file mode 100644
index 000000000..8c9da8b4b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux sub board for CAT874 (CAT875)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	model = "Silicon Linux sub board for CAT874 (CAT875)";
+
+	aliases {
+		ethernet0 = &avb;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c915",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		mux {
+			groups = "avb_mii";
+			function = "avb";
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/condor-common.dtsi b/arch/arm64/boot/dts/renesas/condor-common.dtsi
new file mode 100644
index 000000000..7c34d14dc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/condor-common.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	d1_8v: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	d3_3v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	vddq_vin01: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDQ_VIN01";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi41_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out1>;
+			};
+		};
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&d1_8v>;
+		dvdd-supply = <&d1_8v>;
+		pvdd-supply = <&d1_8v>;
+		bgvdd-supply = <&d1_8v>;
+		dvdd-3v-supply = <&d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4a {
+		compatible = "maxim,max9286";
+		reg = <0x4a>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&d3_3v>;
+	vqmmc-supply = <&vddq_vin01>;
+	mmc-hs200-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pfc {
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso
new file mode 100644
index 000000000..258f8668c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree overlay for the AA104XD12 panel connected to LVDS1 on a Draak or
+ * Ebisu board
+ *
+ * Copyright 2021 Ideas on Board Oy
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+#include "panel-aa104xd12.dtsi"
+};
+
+&{/panel} {
+	backlight = <&backlight>;
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds1_out>;
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
new file mode 100644
index 000000000..ef3bb835d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas Draak board";
+	compatible = "renesas,draak";
+
+	aliases {
+		serial0 = &scif2;
+		ethernet0 = &avb;
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW56-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW56-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW56-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW56-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x18000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		dais = <&rsnd_port0	/* ak4613 */
+			/* HDMI is not yet supported */
+		>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x19_clk: x19 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&audio_clk_b {
+	/*
+	 * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
+	 * and R-Car Sound uses AUDIO_CLKB.
+	 * Note is that schematic indicates VI4_FIELD conection only
+	 * not AUDIO_CLKB at SoC page.
+	 * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
+	 * SW60 should be 1-2.
+	 */
+
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Draak board, however, TX clock internal delay mode
+		 * isn't supported on R-Car D3(e).  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hsusb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 0>; /* audio_clkout */
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_for_ak4613>;
+			};
+		};
+	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x12_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pfc {
+	avb0_pins: avb {
+		groups = "avb0_link", "avb0_mdio", "avb0_mii";
+		function = "avb0";
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data_a";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	keys_pins: keys {
+		pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
+		bias-pull-up;
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0_c";
+		function = "pwm0";
+	};
+
+	pwm1_pins: pwm1 {
+		groups = "pwm1_c";
+		function = "pwm1";
+	};
+
+	rpc_pins: rpc {
+		groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+			 "rpc_int";
+		function = "rpc";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data";
+		function = "scif2";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a", "audio_clk_b",
+			 "audio_clkout", "audio_clkout1";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+		 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&cs2000>, <&audio_clk_b>,
+		 <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+
+	ports {
+		rsnd_port0: port {
+			rsnd_for_ak4613: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_for_ak4613>;
+				frame-master = <&rsnd_for_ak4613>;
+				playback = <&ssi3>, <&src5>, <&dvc0>;
+				capture = <&ssi4>, <&src6>, <&dvc1>;
+			};
+		};
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&rpc_pins>;
+	pinctrl-names = "default";
+
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-otg-pins;
+	status = "okay";
+};
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		port {
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
new file mode 100644
index 000000000..bbc29452d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -0,0 +1,869 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Ebisu board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas Ebisu board";
+	compatible = "renesas,ebisu";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		serial0 = &scif2;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 50000>;
+
+		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+		default-brightness-level = <10>;
+
+		power-supply = <&reg_12p0v>;
+	};
+
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW4-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW4-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW4-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&reg_3p3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "rsnd-ak4613";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS_CN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi1: regulator-vcc-sdhi1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		/*
+		 * TX clock internal delay mode is required for reliable
+		 * 1Gbps communication using the KSZ9031RNX phy present on
+		 * the Ebisu board, however, TX clock internal delay mode
+		 * isn't supported on R-Car E3(e).  Thus, limit speed to
+		 * 100Mbps for reliable communication.
+		 */
+		max-speed = <100>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	io_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	hdmi-encoder@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70>;
+
+		interrupt-parent = <&gpio0>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+			     <17 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@7 {
+				reg = <7>;
+
+				adv7482_ain7: endpoint {
+					remote-endpoint = <&cvbs_con>;
+				};
+			};
+
+			port@8 {
+				reg = <8>;
+
+				adv7482_hdmi: endpoint {
+					remote-endpoint = <&hdmi_in_con>;
+				};
+			};
+
+			port@a {
+				reg = <10>;
+
+				adv7482_txa: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0x1>;
+		rohm,rstbmode-level;
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x13_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	/*
+	 * Even though the LVDS1 output is not connected, the encoder must be
+	 * enabled to supply a pixel clock to the DU for the DPAD output when
+	 * LVDS0 is in use.
+	 */
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>,
+		 <&x13_clk>,
+		 <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb {
+		groups = "avb_link", "avb_mii";
+		function = "avb";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		function = "du";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
+		bias-pull-up;
+	};
+
+	pwm3_pins: pwm3 {
+		groups = "pwm3_b";
+		function = "pwm3";
+	};
+
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+
+	rpc_pins: rpc {
+		groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+			 "rpc_int";
+		function = "rpc";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi1_pins: sd1 {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <3300>;
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		groups = "sdhi1_data4", "sdhi1_ctrl";
+		function = "sdhi1";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb {
+		groups = "usb0_b", "usb0_id";
+		function = "usb0";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&pwm3 {
+	pinctrl-0 = <&pwm3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>, <&src0>, <&dvc0>;
+			capture = <&ssi1>, <&src1>, <&dvc1>;
+		};
+	};
+
+};
+
+&rpc {
+	pinctrl-0 = <&rpc_pins>;
+	pinctrl-names = "default";
+
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi
new file mode 100644
index 000000000..e0930d1ba
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Ideas on Board <kieran.bingham@ideasonboard.com>
+ * Copyright (C) 2021 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Device Tree Source (overlay) that describes GMSL camera connected to
+ * Fakra connectors for the Eagle V3M and Condor V3H (and compatible) boards.
+ *
+ * The following cameras are currently supported: RDACM20 and RDACM21.
+ *
+ * The board .dts file that include this has to select which cameras are in use
+ * by specifying the camera model with:
+ *
+ * #define GMSL_CAMERA_RDACM20
+ * or
+ * #define GMSL_CAMERA_RDACM21
+ *
+ * And which cameras are connected to the board by defining:
+ * for GMSL channel 0:
+ *	   #define GMSL_CAMERA_0
+ *	   #define GMSL_CAMERA_1
+ *	   #define GMSL_CAMERA_2
+ *	   #define GMSL_CAMERA_3
+ *
+ * for GMSL channel 1:
+ *	   #define GMSL_CAMERA_4
+ *	   #define GMSL_CAMERA_5
+ *	   #define GMSL_CAMERA_6
+ *	   #define GMSL_CAMERA_7
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* Validate the board file settings. */
+#if !defined(GMSL_CAMERA_RDACM20) && !defined(GMSL_CAMERA_RDACM21)
+#error "Camera model should be defined by the board file"
+#endif
+
+#if defined(GMSL_CAMERA_RDACM20) && defined(GMSL_CAMERA_RDACM21)
+#error "A single camera model should be selected"
+#endif
+
+#if !defined(GMSL_CAMERA_0) && !defined(GMSL_CAMERA_1) && \
+    !defined(GMSL_CAMERA_2) && !defined(GMSL_CAMERA_3) && \
+    !defined(GMSL_CAMERA_4) && !defined(GMSL_CAMERA_5) && \
+    !defined(GMSL_CAMERA_6) && !defined(GMSL_CAMERA_7)
+#error "At least one camera should be selected"
+#endif
+
+/* Deduce from the enabled cameras which GMSL channels are active. */
+#if defined(GMSL_CAMERA_0) || defined(GMSL_CAMERA_1) || \
+    defined(GMSL_CAMERA_2) || defined(GMSL_CAMERA_3)
+#define GMSL_0
+#endif
+
+#if defined(GMSL_CAMERA_4) || defined(GMSL_CAMERA_5) || \
+    defined(GMSL_CAMERA_6) || defined(GMSL_CAMERA_7)
+#define GMSL_1
+#endif
+
+/* Deduce the camera model compatible string. */
+#if defined(GMSL_CAMERA_RDACM20)
+#define GMSL_CAMERA_MODEL "imi,rdacm20"
+#elif defined(GMSL_CAMERA_RDACM21)
+#define GMSL_CAMERA_MODEL "imi,rdacm21"
+#endif
+
+#ifdef GMSL_0
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&gmsl0 {
+	status = "okay";
+
+#if defined(GMSL_CAMERA_RDACM21)
+	maxim,reverse-channel-microvolt = <100000>;
+#endif
+
+	ports {
+#ifdef GMSL_CAMERA_0
+		port@0 {
+			max9286_in0: endpoint {
+				remote-endpoint = <&fakra_con0>;
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_1
+		port@1 {
+			max9286_in1: endpoint {
+				remote-endpoint = <&fakra_con1>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_2
+		port@2 {
+			max9286_in2: endpoint {
+				remote-endpoint = <&fakra_con2>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_3
+		port@3 {
+			max9286_in3: endpoint {
+				remote-endpoint = <&fakra_con3>;
+			};
+
+		};
+#endif
+	};
+
+	i2c-mux {
+#ifdef GMSL_CAMERA_0
+		i2c@0 {
+			status = "okay";
+
+			camera@51 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x51>, <0x61>;
+
+				port {
+					fakra_con0: endpoint {
+						remote-endpoint = <&max9286_in0>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_1
+		i2c@1 {
+			status = "okay";
+
+			camera@52 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x52>, <0x62>;
+
+				port {
+					fakra_con1: endpoint {
+						remote-endpoint = <&max9286_in1>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_2
+		i2c@2 {
+			status = "okay";
+
+			camera@53 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x53>, <0x63>;
+
+				port {
+					fakra_con2: endpoint {
+						remote-endpoint = <&max9286_in2>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_3
+		i2c@3 {
+			status = "okay";
+
+			camera@54 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x54>, <0x64>;
+
+				port {
+					fakra_con3: endpoint {
+						remote-endpoint = <&max9286_in3>;
+					};
+				};
+			};
+		};
+#endif
+	};
+};
+#endif /* ifdef GMSL_0 */
+
+#ifdef GMSL_1
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
+
+&gmsl1 {
+	status = "okay";
+
+#if defined(GMSL_CAMERA_RDACM21)
+	maxim,reverse-channel-microvolt = <100000>;
+#endif
+
+	ports {
+#ifdef GMSL_CAMERA_4
+		port@0 {
+			max9286_in4: endpoint {
+				remote-endpoint = <&fakra_con4>;
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_5
+		port@1 {
+			max9286_in5: endpoint {
+				remote-endpoint = <&fakra_con5>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_6
+		port@2 {
+			max9286_in6: endpoint {
+				remote-endpoint = <&fakra_con6>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_7
+		port@3 {
+			max9286_in7: endpoint {
+				remote-endpoint = <&fakra_con7>;
+			};
+
+		};
+#endif
+	};
+
+	i2c-mux {
+#ifdef GMSL_CAMERA_4
+		i2c@0 {
+			status = "okay";
+
+			camera@55 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x55>, <0x65>;
+
+				port {
+					fakra_con4: endpoint {
+						remote-endpoint = <&max9286_in4>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_5
+		i2c@1 {
+			status = "okay";
+
+			camera@56 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x56>, <0x66>;
+
+				port {
+					fakra_con5: endpoint {
+						remote-endpoint = <&max9286_in5>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_6
+		i2c@2 {
+			status = "okay";
+
+			camera@57 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x57>, <0x67>;
+
+				port {
+					fakra_con6: endpoint {
+						remote-endpoint = <&max9286_in6>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_7
+		i2c@3 {
+			status = "okay";
+
+			camera@58 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x58>, <0x68>;
+
+				port {
+					fakra_con7: endpoint {
+						remote-endpoint = <&max9286_in7>;
+					};
+				};
+			};
+		};
+#endif
+	};
+};
+#endif /* ifdef GMSL_1 */
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
new file mode 100644
index 000000000..83104af28
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb1-reset-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "usb1-reset";
+	};
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	status = "okay";
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
new file mode 100644
index 000000000..8e2db1d6c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
+ * parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c4 {
+	gpio_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pfc {
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a";
+		function = "audio_clk";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
new file mode 100644
index 000000000..7fc0339a3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/*
+	 * Update <audio_clk_b> to <cs2000>
+	 * Switch SW2404 should be at position 1 so that clock from
+	 * CS2000 is connected to AUDIO_CLKB_A
+	 */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
new file mode 100644
index 000000000..3771144a2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[HMN] MIPI common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define MIPI_OV5645_PARENT_I2C i2c2
+#define MIPI_IMX219_PARENT_I2C i2c3
+#include "aistarvision-mipi-adapter-2.1.dtsi"
+
+&csi20 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi20_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&imx219_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&imx219 {
+	port {
+		imx219_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			link-frequencies = /bits/ 64 <456000000>;
+			remote-endpoint = <&csi40_in>;
+		};
+	};
+};
+
+&ov5645 {
+	enable-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+	port {
+		ov5645_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&csi20_in>;
+		};
+	};
+};
+
+&pfc {
+	i2c3_pins: i2c3 {
+		groups = "i2c3";
+		function = "i2c3";
+	};
+};
+
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
new file mode 100644
index 000000000..d66d17e34
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-hog {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
new file mode 100644
index 000000000..ad898c6db
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	rx-internal-delay-ps = <1800>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c915",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi
new file mode 100644
index 000000000..4b1f0982b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/panel-aa104xd12.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car Gen3 boards.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ */
+
+panel {
+	compatible = "mitsubishi,aa104xd12", "panel-lvds";
+
+	width-mm = <210>;
+	height-mm = <158>;
+	data-mapping = "jeida-18";
+
+	panel-timing {
+		/* 1024x768 @65Hz */
+		clock-frequency = <65000000>;
+		hactive = <1024>;
+		vactive = <768>;
+		hsync-len = <136>;
+		hfront-porch = <20>;
+		hback-porch = <160>;
+		vfront-porch = <3>;
+		vback-porch = <29>;
+		vsync-len = <6>;
+	};
+
+	port {
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
new file mode 100644
index 000000000..24da6ee6e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774a1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
+	compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
new file mode 100644
index 000000000..06c04c59c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
new file mode 100644
index 000000000..5c91e0d7e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-mipi-2.1.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board connected with aistarvision-mipi-v2-adapter board";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+};
+
+/*
+ * On RZ/G2M SoC LSI V1.3 CSI40 supports only 4 lane mode.
+ * HiHope RZ/G2M Rev.4.0 board is based on LSI V1.3 so disable csi40 and
+ * imx219 as the imx219 endpoint driver supports only 2 lane mode.
+ */
+&csi40 {
+	status = "disabled";
+};
+
+&imx219 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 000000000..a5ca86196
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
new file mode 100644
index 000000000..c0e9d8ca4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
new file mode 100644
index 000000000..2221cf6ae
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
new file mode 100644
index 000000000..bb18f6ee2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 000000000..25ae255de
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
new file mode 100644
index 000000000..9065dc243
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -0,0 +1,2865 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774a1 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774a1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774A1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774a1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774A1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <560>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774A1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774A1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774a1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774a1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774a1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774a1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774a1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774a1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x0bb0>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774a1-rst";
+			reg = <0 0xe6160000 0 0x018c>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774a1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774a1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774a1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774a1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774a1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774a1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774a1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774a1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774a1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774a1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774a1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774a1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774A1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774a1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774a1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774a1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774a1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774a1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774a1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774a1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774a1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774A1_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774A1_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774A1_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774a1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774A1_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774a1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774a1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774a1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774a1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774A1_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774a1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774a1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774a1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774A1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774a1";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774a1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
new file mode 100644
index 000000000..8b9df6aff
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774b1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon Embedded Works RZ/G2N Development Kit";
+	compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		serial6 = &scif4;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 721>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		"dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
new file mode 100644
index 000000000..4b5154f02
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
new file mode 100644
index 000000000..ce8e3bcc7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-mipi-2.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N with sub board connected with aistarvision-mipi-v2-adapter board";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
new file mode 100644
index 000000000..60d7c8ade
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to
+ * sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
new file mode 100644
index 000000000..e730b3b25
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
new file mode 100644
index 000000000..2e5e1de04
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
new file mode 100644
index 000000000..c69ca5cf6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
new file mode 100644
index 000000000..f1883cbd1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
new file mode 100644
index 000000000..75776decd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -0,0 +1,2716 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774b1 SoC
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774b1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774b1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774B1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774b1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774B1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774B1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774B1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774b1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774b1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774b1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774b1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774b1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774b1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774b1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774b1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774b1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774b1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774b1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774b1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774b1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774b1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774b1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774b1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774b1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774b1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774B1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774b1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774b1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774b1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774b1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774b1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774B1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774b1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774b1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774b1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774B1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774b1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774b1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774b1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774b1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774b1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774B1_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774B1_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774B1_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774b1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774B1_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774b1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a774b1",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774b1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774b1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774b1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774b1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774B1_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774b1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774b1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774b1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774B1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774b1";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774b1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
new file mode 100644
index 000000000..5a6ea08ff
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+	model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
+	compatible = "si-linux,cat874", "renesas,r8a774c0";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif2;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&tda19988_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+		};
+
+		led1 {
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+
+		led2 {
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+
+		led3 {
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "D12.0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "CAT874 HDMI sound";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	wlan_en_reg: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&tda19988_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		video-ports = <0x234501>;
+
+		#sound-dai-cells = <0>;
+		audio-ports = <TDA998x_I2S 0x03>;
+		clocks = <&rcar_sound 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				tda19988_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				tda19988_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@32 {
+		compatible = "epson,rx8571";
+		reg = <0x32>;
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	/* Map all possible DDR as inbound ranges */
+	dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+};
+
+&pfc {
+	du_pins: du {
+		groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
+			 "du_clk_in_0";
+		function = "du";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a", "hscif2_ctrl_a";
+		function = "hscif2";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1_b";
+		function = "i2c1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data";
+		function = "ssi";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30", "usb30_id";
+		function = "usb30";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>, <&src0>, <&dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	status = "okay";
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&usb2_phy0 {
+	renesas,no-otg-pins;
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
new file mode 100644
index 000000000..c1812d1ef
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874),
+ * connected to an Advantech IDK-2121WR 21.5" LVDS panel
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-ek874.dts"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel-lvds {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				dual-lvds-odd-pixels;
+				panel_in0: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				dual-lvds-even-pixels;
+				panel_in1: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+		};
+	};
+};
+
+&gpio0 {
+	/*
+	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
+	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
+	 */
+	lvds-connector-en-hog {
+		gpio-hog;
+		gpios = <17 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in0>;
+			};
+		};
+	};
+};
+
+&lvds1 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+
+	ports {
+		port@1 {
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in1>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm5_pins: pwm5 {
+		groups = "pwm5_a";
+		function = "pwm5";
+	};
+};
+
+&pwm5 {
+	pinctrl-0 = <&pwm5_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
new file mode 100644
index 000000000..2e3d1981c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0-ek874.dts"
+#define MIPI_OV5645_PARENT_I2C i2c3
+#define MIPI_IMX219_PARENT_I2C i2c3
+#include "aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875) with aistarvision-mipi-v2-adapter board";
+	compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&ov5645 {
+	enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+	port {
+		ov5645_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&csi40_in>;
+		};
+	};
+};
+
+&imx219 {
+	port {
+		imx219_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			link-frequencies = /bits/ 64 <456000000>;
+			/* uncomment remote-endpoint property to tie imx219 to
+			 * CSI2 also make sure remote-endpoint for ov5645 camera
+			 * is commented and remote endpoint phandle in csi40_in
+			 * is imx219_ep
+			 */
+			/* remote-endpoint = <&csi40_in>; */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874.dts
new file mode 100644
index 000000000..e7b6619ab
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874)
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774c0-cat874.dts"
+#include "cat875.dtsi"
+
+/ {
+	model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875)";
+	compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
new file mode 100644
index 000000000..ad2e87b03
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -0,0 +1,2000 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2E (R8A774C0) SoC
+ *
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a774c0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a774c0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774C0_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774c0-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774c0",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774c0";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774c0-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774c0-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774c0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774c0-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774c0-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a774c0";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774c0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774c0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774c0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774c0",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774c0",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774c0",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774c0-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774C0_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774c0";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774c0",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774c0",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774c0-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774C0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774c0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774c0",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774C0_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x5b>, <&dmac0 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774c0",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774c0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774c0",
+				     "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774C0_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774c0",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774c0",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774c0-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774c0",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774C0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774C0_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774c0",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774C0_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774c0-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774c0",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774c0-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774c0-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774c0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a774c0-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
new file mode 100644
index 000000000..146f78cb6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774e1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon Embedded Works RZ/G2H Development Kit";
+	compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &iic_pmic;
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		serial6 = &scif4;
+		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 721>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		"dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
new file mode 100644
index 000000000..3b7339127
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
new file mode 100644
index 000000000..46adb6efb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex-mipi-2.1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H board
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1-hihope-rzg2h-ex.dts"
+#include "hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board connected with aistarvision-mipi-v2-adapter board";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
new file mode 100644
index 000000000..812995939
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
+		     "renesas,r8a774e1";
+};
+
+/* Set SW43 = ON and SW1001[7] = OFF for SATA port to be activated */
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
new file mode 100644
index 000000000..9525d5ed6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H main board based on r8a774e1";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
new file mode 100644
index 000000000..2acf4067a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -0,0 +1,2997 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774e1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774e1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774E1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774e1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774e1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a774e1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774e1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774e1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774e1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774e1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774e1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		iic_pmic: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774e1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a774e1",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_clksel: clock-controller@e6590630 {
+			compatible = "renesas,r8a774e1-rcar-usb2-clock-sel",
+				     "renesas,rcar-gen3-usb2-clock-sel";
+			reg = <0 0xe6590630 0 0x02>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+				 <&usb_extal_clk>, <&usb3s0_clk>;
+			clock-names = "ehci_ohci", "hs-usb-if",
+				      "usb_extal", "usb_xtal";
+			#clock-cells = <0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			reset-names = "ehci_ohci", "hs-usb-if";
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a774e1-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a774e1-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+				 <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+				 <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+				 <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+				 <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+				 <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+				 <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+				 <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+				 <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+				 <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+				 <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+				 <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+				 <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+				 <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+				 <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774e1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774e1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a774e1", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a774e1";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+				 <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+				 <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+				 <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+				 <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+				 <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+				 <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+				 <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+				 <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+				 <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+				 <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+				 <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+				 <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+				 <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+				 <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a774e1",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a774e1-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a774e1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a774e1",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774E1_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774E1_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774E1_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774E1_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a774e1-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a774e1",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			iommus = <&ipmmu_hc 2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a774e1",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a774e1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a774e1-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 624>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 630>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 118>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 614>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 606>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			resets = <&cpg 610>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a774e1-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a774e1-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a774e1-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A774E1_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a774e1";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>,
+				 <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+			status = "disabled";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a774e1-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <6313>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
new file mode 100644
index 000000000..d8e655ba8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77951.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77951";
+	compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
new file mode 100644
index 000000000..7f9fa842f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77951.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77951";
+	compatible = "renesas,salvator-xs", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
new file mode 100644
index 000000000..2e58a27aa
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3 ES2.0+
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a77951-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a77951";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
new file mode 100644
index 000000000..06d4e948e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board with R-Car H3 ES2.0+
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77951.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a77951";
+	compatible = "renesas,h3ulcb", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
new file mode 100644
index 000000000..6d15229d2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -0,0 +1,3485 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car H3 (R8A77951) SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7795-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A7795_CLK_S0D4
+
+#define SOC_HAS_HDMI1
+#define SOC_HAS_SATA
+#define SOC_HAS_USB2_CH2
+#define SOC_HAS_USB2_CH3
+
+/ {
+	compatible = "renesas,r8a7795";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7795_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7795_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>,
+				     <&a53_1>,
+				     <&a53_2>,
+				     <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>,
+				     <&a57_1>,
+				     <&a57_2>,
+				     <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7795";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a7795-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a7795-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7795-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7795-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7795-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7795-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7795",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 96>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		hsusb3: usb@e659c000 {
+			compatible = "renesas,usbhs-r8a7795",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe659c000 0 0x200>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
+			dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
+			       <&usb_dmac3 0>, <&usb_dmac3 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy3 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 705>, <&cpg 700>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac2: dma-controller@e6460000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6460000 0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 326>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 326>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac3: dma-controller@e6470000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe6470000 0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 329>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a7795-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A7795_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a7795";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7795",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a7795",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a7795",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7795-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7795_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7795", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7795", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a7795";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7795-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a7795-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 0>, <&ipmmu_mp0 1>,
+			       <&ipmmu_mp0 2>, <&ipmmu_mp0 3>,
+			       <&ipmmu_mp0 4>, <&ipmmu_mp0 5>,
+			       <&ipmmu_mp0 6>, <&ipmmu_mp0 7>,
+			       <&ipmmu_mp0 8>, <&ipmmu_mp0 9>,
+			       <&ipmmu_mp0 10>, <&ipmmu_mp0 11>,
+			       <&ipmmu_mp0 12>, <&ipmmu_mp0 13>,
+			       <&ipmmu_mp0 14>, <&ipmmu_mp0 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp0 16>, <&ipmmu_mp0 17>,
+			       <&ipmmu_mp0 18>, <&ipmmu_mp0 19>,
+			       <&ipmmu_mp0 20>, <&ipmmu_mp0 21>,
+			       <&ipmmu_mp0 22>, <&ipmmu_mp0 23>,
+			       <&ipmmu_mp0 24>, <&ipmmu_mp0 25>,
+			       <&ipmmu_mp0 26>, <&ipmmu_mp0 27>,
+			       <&ipmmu_mp0 28>, <&ipmmu_mp0 29>,
+			       <&ipmmu_mp0 30>, <&ipmmu_mp0 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a7795-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ohci2: usb@ee0c0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0c0000 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			status = "disabled";
+		};
+
+		ohci3: usb@ee0e0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0e0000 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			phys = <&usb2_phy3 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci2: usb@ee0c0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0c0100 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2 2>;
+			phy-names = "usb";
+			companion = <&ohci2>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			status = "disabled";
+		};
+
+		ehci3: usb@ee0e0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0e0100 0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			phys = <&usb2_phy3 2>;
+			phy-names = "usb";
+			companion = <&ohci3>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy2: usb-phy@ee0c0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0c0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 701>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 701>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy3: usb-phy@ee0e0200 {
+			compatible = "renesas,usb2-phy-r8a7795",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0e0200 0 0x700>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 700>, <&cpg 705>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7795_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7795_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7795_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7795",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7795_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a7795-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a7795",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+			iommus = <&ipmmu_hc 2>;
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7795",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7795",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec0_ep: pcie-ep@fe000000 {
+			compatible = "renesas,r8a7795-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xfe000000 0 0x80000>,
+			      <0x0 0xfe100000 0 0x100000>,
+			      <0x0 0xfe200000 0 0x200000>,
+			      <0x0 0x30000000 0 0x8000000>,
+			      <0x0 0x38000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>;
+			clock-names = "pcie";
+			resets = <&cpg 319>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pciec1_ep: pcie-ep@ee800000 {
+			compatible = "renesas,r8a7795-pcie-ep",
+				     "renesas,rcar-gen3-pcie-ep";
+			reg = <0x0 0xee800000 0 0x80000>,
+			      <0x0 0xee900000 0 0x100000>,
+			      <0x0 0xeea00000 0 0x200000>,
+			      <0x0 0xc0000000 0 0x8000000>,
+			      <0x0 0xc8000000 0 0x8000000>;
+			reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			clock-names = "pcie";
+			resets = <&cpg 318>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		imr-lx4@fe880000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe880000 0 0x2000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 821>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 821>;
+		};
+
+		imr-lx4@fe890000 {
+			compatible = "renesas,r8a7795-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe890000 0 0x2000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 820>;
+			power-domains = <&sysc R8A7795_PD_A3VC>;
+			resets = <&cpg 820>;
+		};
+
+		vspbc: vsp@fe920000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe920000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 624>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 624>;
+
+			renesas,fcp = <&fcpvb1>;
+		};
+
+		vspbd: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspi1: vsp@fe9b0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9b0000 0 0x8000>;
+			interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 630>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 630>;
+
+			renesas,fcp = <&fcpvi1>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fdp1@fe944000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe944000 0 0x2400>;
+			interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 118>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 118>;
+			renesas,fcp = <&fcpf1>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 615>;
+			iommus = <&ipmmu_vp0 0>;
+		};
+
+		fcpf1: fcp@fe951000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe951000 0 0x200>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 614>;
+			iommus = <&ipmmu_vp1 1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvb1: fcp@fe92f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe92f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 606>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 606>;
+			iommus = <&ipmmu_vp1 7>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		fcpvi1: fcp@fe9bf000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9bf000 0 0x200>;
+			clocks = <&cpg CPG_MOD 610>;
+			power-domains = <&sysc R8A7795_PD_A3VP>;
+			resets = <&cpg 610>;
+			iommus = <&ipmmu_vp1 9>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi1 10>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm2: cmm@fea60000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea60000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 709>;
+			resets = <&cpg 709>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a7795-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a7795-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi41vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi41>;
+					};
+					csi41vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi41>;
+					};
+					csi41vin6: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin6csi41>;
+					};
+					csi41vin7: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin7csi41>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		hdmi1: hdmi@feae0000 {
+			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfeae0000 0 0x10000>;
+			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 728>, <&cpg CPG_CORE R8A7795_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 728>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi1_in: endpoint {
+						remote-endpoint = <&du_out_hdmi1>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7795";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.2", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>,
+				       <&vspd0 1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_hdmi1: endpoint {
+						remote-endpoint = <&dw_hdmi1_in>;
+					};
+				};
+				port@3 {
+					reg = <3>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7795-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
new file mode 100644
index 000000000..d5543f26c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-W
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77960";
+	compatible = "renesas,salvator-x", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
new file mode 100644
index 000000000..9ebb47b6b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77960";
+	compatible = "renesas,salvator-xs", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
new file mode 100644
index 000000000..02d613606
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a77960-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a77960";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a7796";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
new file mode 100644
index 000000000..4bfeb1df0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77960.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77960";
+	compatible = "renesas,m3ulcb", "renesas,r8a7796";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
new file mode 100644
index 000000000..17062ec50
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -0,0 +1,3080 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-W (R8A77960) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7796-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A7796_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a7796";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7796_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7796_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7796-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7796",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a7796";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a7796-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a7796-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7796-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7796-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7796-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a7796-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7796", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a7796", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7796",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7796",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7796",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7796",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7796-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a7796-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A7796_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7796",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a7796",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a7796",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a7796-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A7796_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7796", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7796",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7796", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7796",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a7796";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x64>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x64>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x64>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x64>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x64>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x64>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x64>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a7796-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x64>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7796_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a7796-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7796",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7796",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a7796-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7796",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A7796_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A7796_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A7796_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7796",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A7796_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a7796-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		imr-lx4@fe860000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe860000 0 0x2000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 823>;
+		};
+
+		imr-lx4@fe870000 {
+			compatible = "renesas,r8a7796-imr-lx4",
+				     "renesas,imr-lx4";
+			reg = <0 0xfe870000 0 0x2000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 822>;
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A7796_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm2: cmm@fea60000 {
+			compatible = "renesas,r8a7796-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea60000 0 0x1000>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 709>;
+			resets = <&cpg 709>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a7796-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a7796-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a7796-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A7796_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a7796";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7796-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
new file mode 100644
index 000000000..c7f14177f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77961.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77961";
+	compatible = "renesas,salvator-xs", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts
new file mode 100644
index 000000000..d66eb27ee
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb-kf.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3-W+
+ *
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a77961-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a77961";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a77961";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
new file mode 100644
index 000000000..70cf92666
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961-ulcb.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board with R-Car M3-W+
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77961.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a77961";
+	compatible = "renesas,m3ulcb", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
new file mode 100644
index 000000000..d3f47da1b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -0,0 +1,2901 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-W+ (R8A77961) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77961-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77961-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A77961_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a77961";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77961_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_1>;
+			clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77961_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77961_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77961-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77961",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77961";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77961-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77961-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77961-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77961-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77961-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77961-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77961-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77961-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77961", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77961", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77961",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77961",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77961",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77961",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77961-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77961-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a77961-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77961_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77961",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77961",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77961",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77961-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77961",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77961_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77961", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77961",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77961";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77961_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77961-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a77961",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77961",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77961-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77961",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a77961",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77961_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77961_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77961_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77961",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77961_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77961-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77961",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77961",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 615>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		fcpvd2: fcp@fea37000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea37000 0 0x200>;
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		vspd2: vsp@fea30000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea30000 0 0x5000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+
+			renesas,fcp = <&fcpvd2>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a77961-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77961-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					/* HDMI sound */
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77961";
+			reg = <0 0xfeb00000 0 0x70000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 722>;
+			clock-names = "du.0", "du.1", "du.2";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.2";
+
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77961-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
new file mode 100644
index 000000000..f84c64ed4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-x.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board based on r8a77965";
+	compatible = "renesas,salvator-x", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x21_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
new file mode 100644
index 000000000..a1d3c8d53
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-N
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a77965";
+	compatible = "renesas,salvator-xs", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
new file mode 100644
index 000000000..a601968c5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a77965-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3NULCB Kingfisher board based on r8a77965";
+	compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+		     "renesas,r8a77965";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
new file mode 100644
index 000000000..71704b67a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board with R-Car M3-N
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3NULCB board based on r8a77965";
+	compatible = "renesas,m3nulcb", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
new file mode 100644
index 000000000..c75820038
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -0,0 +1,2889 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car M3-N (R8A77965) SoC
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Based on r8a7796.dtsi
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77965-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77965-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A77965_CLK_S0D4
+
+#define SOC_HAS_SATA
+
+/ {
+	compatible = "renesas,r8a77965";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <830000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <960000>;
+			clock-latency-ns = <300000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77965_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>,
+				     <&a57_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77965-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a77965",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77965";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77965-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77965-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77965-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77965-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77965-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77965-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77965", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77965", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77965",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77965",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77965",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77965-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77965-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			compatible = "renesas,r8a77965-usb3-phy",
+				     "renesas,rcar-gen3-usb3-phy";
+			reg = <0 0xe65ee000 0 0x90>;
+			clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+				 <&usb_extal_clk>;
+			clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77965",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77965",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77965",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77965-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77965_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			resets = <&cpg 523>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77965",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77965", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77965",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin0>;
+					};
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin1>;
+					};
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin2>;
+					};
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin3>;
+					};
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin4>;
+					};
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin5>;
+					};
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin6>;
+					};
+					vin6csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77965";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi20: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi20vin7>;
+					};
+					vin7csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin7>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x84>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x84>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x84>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x84>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x84>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x28>, <&dmac2 0x28>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x84>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2a>, <&dmac2 0x2a>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x84>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2c>, <&dmac2 0x2c>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a77965-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x84>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x2e>, <&dmac2 0x2e>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&audma0 0x35>, <&audma1 0x36>;
+					dma-names = "rx", "tx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&audma0 0x37>, <&audma1 0x38>;
+					dma-names = "rx", "tx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&audma0 0x47>, <&audma1 0x48>;
+					dma-names = "rx", "tx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&audma0 0x3F>, <&audma1 0x40>;
+					dma-names = "rx", "tx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&audma0 0x43>, <&audma1 0x44>;
+					dma-names = "rx", "tx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&audma0 0x4F>, <&audma1 0x50>;
+					dma-names = "rx", "tx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&audma0 0x53>, <&audma1 0x54>;
+					dma-names = "rx", "tx";
+				};
+				ssiu10: ssiu-8 {
+					dmas = <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu11: ssiu-9 {
+					dmas = <&audma0 0x4B>, <&audma1 0x4C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu12: ssiu-10 {
+					dmas = <&audma0 0x57>, <&audma1 0x58>;
+					dma-names = "rx", "tx";
+				};
+				ssiu13: ssiu-11 {
+					dmas = <&audma0 0x59>, <&audma1 0x5A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu14: ssiu-12 {
+					dmas = <&audma0 0x5F>, <&audma1 0x60>;
+					dma-names = "rx", "tx";
+				};
+				ssiu15: ssiu-13 {
+					dmas = <&audma0 0xC3>, <&audma1 0xC4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu16: ssiu-14 {
+					dmas = <&audma0 0xC7>, <&audma1 0xC8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu17: ssiu-15 {
+					dmas = <&audma0 0xCB>, <&audma1 0xCC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu20: ssiu-16 {
+					dmas = <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx";
+				};
+				ssiu21: ssiu-17 {
+					dmas = <&audma0 0x67>, <&audma1 0x68>;
+					dma-names = "rx", "tx";
+				};
+				ssiu22: ssiu-18 {
+					dmas = <&audma0 0x6B>, <&audma1 0x6C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu23: ssiu-19 {
+					dmas = <&audma0 0x6D>, <&audma1 0x6E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu24: ssiu-20 {
+					dmas = <&audma0 0xCF>, <&audma1 0xCE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu25: ssiu-21 {
+					dmas = <&audma0 0xEB>, <&audma1 0xEC>;
+					dma-names = "rx", "tx";
+				};
+				ssiu26: ssiu-22 {
+					dmas = <&audma0 0xED>, <&audma1 0xEE>;
+					dma-names = "rx", "tx";
+				};
+				ssiu27: ssiu-23 {
+					dmas = <&audma0 0xEF>, <&audma1 0xF0>;
+					dma-names = "rx", "tx";
+				};
+				ssiu30: ssiu-24 {
+					dmas = <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx";
+				};
+				ssiu31: ssiu-25 {
+					dmas = <&audma0 0x21>, <&audma1 0x22>;
+					dma-names = "rx", "tx";
+				};
+				ssiu32: ssiu-26 {
+					dmas = <&audma0 0x23>, <&audma1 0x24>;
+					dma-names = "rx", "tx";
+				};
+				ssiu33: ssiu-27 {
+					dmas = <&audma0 0x25>, <&audma1 0x26>;
+					dma-names = "rx", "tx";
+				};
+				ssiu34: ssiu-28 {
+					dmas = <&audma0 0x27>, <&audma1 0x28>;
+					dma-names = "rx", "tx";
+				};
+				ssiu35: ssiu-29 {
+					dmas = <&audma0 0x29>, <&audma1 0x2A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu36: ssiu-30 {
+					dmas = <&audma0 0x2B>, <&audma1 0x2C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu37: ssiu-31 {
+					dmas = <&audma0 0x2D>, <&audma1 0x2E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu40: ssiu-32 {
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx";
+				};
+				ssiu41: ssiu-33 {
+					dmas = <&audma0 0x17>, <&audma1 0x18>;
+					dma-names = "rx", "tx";
+				};
+				ssiu42: ssiu-34 {
+					dmas = <&audma0 0x19>, <&audma1 0x1A>;
+					dma-names = "rx", "tx";
+				};
+				ssiu43: ssiu-35 {
+					dmas = <&audma0 0x1B>, <&audma1 0x1C>;
+					dma-names = "rx", "tx";
+				};
+				ssiu44: ssiu-36 {
+					dmas = <&audma0 0x1D>, <&audma1 0x1E>;
+					dma-names = "rx", "tx";
+				};
+				ssiu45: ssiu-37 {
+					dmas = <&audma0 0x1F>, <&audma1 0x20>;
+					dma-names = "rx", "tx";
+				};
+				ssiu46: ssiu-38 {
+					dmas = <&audma0 0x31>, <&audma1 0x32>;
+					dma-names = "rx", "tx";
+				};
+				ssiu47: ssiu-39 {
+					dmas = <&audma0 0x33>, <&audma1 0x34>;
+					dma-names = "rx", "tx";
+				};
+				ssiu50: ssiu-40 {
+					dmas = <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx";
+				};
+				ssiu60: ssiu-41 {
+					dmas = <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx";
+				};
+				ssiu70: ssiu-42 {
+					dmas = <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx";
+				};
+				ssiu80: ssiu-43 {
+					dmas = <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx";
+				};
+				ssiu90: ssiu-44 {
+					dmas = <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx";
+				};
+				ssiu91: ssiu-45 {
+					dmas = <&audma0 0x7F>, <&audma1 0x80>;
+					dma-names = "rx", "tx";
+				};
+				ssiu92: ssiu-46 {
+					dmas = <&audma0 0x81>, <&audma1 0x82>;
+					dma-names = "rx", "tx";
+				};
+				ssiu93: ssiu-47 {
+					dmas = <&audma0 0x83>, <&audma1 0x84>;
+					dma-names = "rx", "tx";
+				};
+				ssiu94: ssiu-48 {
+					dmas = <&audma0 0xA3>, <&audma1 0xA4>;
+					dma-names = "rx", "tx";
+				};
+				ssiu95: ssiu-49 {
+					dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+					dma-names = "rx", "tx";
+				};
+				ssiu96: ssiu-50 {
+					dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+					dma-names = "rx", "tx";
+				};
+				ssiu97: ssiu-51 {
+					dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>;
+					dma-names = "rx", "tx";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>;
+					dma-names = "rx", "tx";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>;
+					dma-names = "rx", "tx";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>;
+					dma-names = "rx", "tx";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>;
+					dma-names = "rx", "tx";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>;
+					dma-names = "rx", "tx";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>;
+					dma-names = "rx", "tx";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>;
+					dma-names = "rx", "tx";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>;
+					dma-names = "rx", "tx";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>;
+					dma-names = "rx", "tx";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77965-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a77965",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77965",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77965-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77965",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a77965",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77965_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77965_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77965_CLK_SD2H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77965",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77965_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77965-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a77965",
+				     "renesas,rcar-gen3-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xee800000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+				 <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+				 <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+				 <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			iommu-map = <0 &ipmmu_hc 1 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		fdp1@fe940000 {
+			compatible = "renesas,fdp1";
+			reg = <0 0xfe940000 0 0x2400>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 119>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 119>;
+			renesas,fcp = <&fcpf0>;
+		};
+
+		fcpf0: fcp@fe950000 {
+			compatible = "renesas,fcpf";
+			reg = <0 0xfe950000 0 0x200>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 615>;
+		};
+
+		vspb: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 626>;
+
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 631>;
+
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 607>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			resets = <&cpg 611>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		cmm3: cmm@fea70000 {
+			compatible = "renesas,r8a77965-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea70000 0 0x1000>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 708>;
+			resets = <&cpg 708>;
+		};
+
+		csi20: csi2@fea80000 {
+			compatible = "renesas,r8a77965-csi2";
+			reg = <0 0xfea80000 0 0x10000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi20vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi20>;
+					};
+					csi20vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi20>;
+					};
+					csi20vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi20>;
+					};
+					csi20vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi20>;
+					};
+					csi20vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi20>;
+					};
+					csi20vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi20>;
+					};
+					csi20vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi20>;
+					};
+					csi20vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi20>;
+					};
+				};
+			};
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77965-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+					csi40vin4: endpoint@4 {
+						reg = <4>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@5 {
+						reg = <5>;
+						remote-endpoint = <&vin5csi40>;
+					};
+					csi40vin6: endpoint@6 {
+						reg = <6>;
+						remote-endpoint = <&vin6csi40>;
+					};
+					csi40vin7: endpoint@7 {
+						reg = <7>;
+						remote-endpoint = <&vin7csi40>;
+					};
+				};
+			};
+		};
+
+		hdmi0: hdmi@fead0000 {
+			compatible = "renesas,r8a77965-hdmi",
+				     "renesas,rcar-gen3-hdmi";
+			reg = <0 0xfead0000 0 0x10000>;
+			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 729>,
+				 <&cpg CPG_CORE R8A77965_CLK_HDMI>;
+			clock-names = "iahb", "isfr";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 729>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					dw_hdmi0_in: endpoint {
+						remote-endpoint = <&du_out_hdmi0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77965";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
+				 <&cpg CPG_MOD 721>;
+			clock-names = "du.0", "du.1", "du.3";
+			resets = <&cpg 724>, <&cpg 722>;
+			reset-names = "du.0", "du.3";
+
+			renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+					du_out_hdmi0: endpoint {
+						remote-endpoint = <&dw_hdmi0_in>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77965-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
+
+			trips {
+				target: trip-point1 {
+					/* miliCelsius  */
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
new file mode 100644
index 000000000..405404c08
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Eagle board with R-Car V3M
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas Eagle board based on r8a77970";
+	compatible = "renesas,eagle", "renesas,r8a77970";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		serial0 = &scif0;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	d3p3: regulator-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+
+		vcc-supply = <&d3p3>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	x1_clk: x1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>, <&x1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb0 {
+		groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+		function = "avb0";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data_a";
+		function = "canfd0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c3_pins: i2c3 {
+		groups = "i2c3_a";
+		function = "i2c3";
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
new file mode 100644
index 000000000..e36999e91
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the V3M Starter Kit board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas V3M Starter Kit board";
+	compatible = "renesas,v3msk", "renesas,r8a77970";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		serial0 = &scif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&vcc_d3_3v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	osc5_clk: osc5-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	vcc_d1_8v: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_D1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_d3_3v: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_D3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_vddq_vin0: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_VDDQ_VIN0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&osc5_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		#sound-dai-cells = <0>;
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&vcc_d1_8v>;
+		dvdd-supply = <&vcc_d1_8v>;
+		pvdd-supply = <&vcc_d1_8v>;
+		bgvdd-supply = <&vcc_d1_8v>;
+		dvdd-3v-supply = <&vcc_d3_3v>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_d3_3v>;
+	vqmmc-supply = <&vcc_vddq_vin0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pfc {
+	avb_pins: avb0 {
+		groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
+		function = "avb0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	mmc_pins: mmc_3_3v {
+		groups = "mmc_data8", "mmc_ctrl";
+		function = "mmc";
+		power-source = <3300>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
new file mode 100644
index 000000000..ed6e2e47c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -0,0 +1,1220 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3M (R8A77970) SoC
+ *
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/clock/r8a77970-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a77970-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77970";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
+			power-domains = <&sysc R8A77970_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77970_CLK_Z2>;
+			power-domains = <&sysc R8A77970_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A77970_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77970-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 6>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77970",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77970";
+			reg = <0 0xe6060000 0 0x504>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77970-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77970-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77970-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77970-rst";
+			reg = <0 0xe6160000 0 0x200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77970-sysc";
+			reg = <0 0xe6180000 0 0x440>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77970";
+			reg = <0 0xe6190000 0 0x10>,
+			      <0 0xe6190100 0 0x120>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77970", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77970", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>,
+			       <&dmac2 0x97>, <&dmac2 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77970",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac1 0x99>, <&dmac1 0x98>,
+			       <&dmac2 0x99>, <&dmac2 0x98>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77970",
+				     "renesas,rcar-gen3-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77970-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A77970_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77970_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77970",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_rt 3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77970",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77970_CLK_S2D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77970", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			dmas = <&dmac1 0x45>, <&dmac1 0x44>,
+			       <&dmac2 0x45>, <&dmac2 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77970",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			dmas = <&dmac1 0x47>, <&dmac1 0x46>,
+			       <&dmac2 0x47>, <&dmac2 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77970";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77970",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77970",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77970_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77970";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77970",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77970-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1010000 0 0x1000>,
+			      <0 0xf1020000 0 0x20000>,
+			      <0 0xf1040000 0 0x20000>,
+			      <0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(2) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77970-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77970-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
new file mode 100644
index 000000000..68d1f1d53
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor board with R-Car V3H
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+#include "condor-common.dtsi"
+
+/ {
+	model = "Renesas Condor board based on r8a77980";
+	compatible = "renesas,condor", "renesas,r8a77980";
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
new file mode 100644
index 000000000..77d22df25
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the V3H Starter Kit board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas V3H Starter Kit board";
+	compatible = "renesas,v3hsk", "renesas,r8a77980";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &scif0;
+		ethernet0 = &gether;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	lvds-decoder {
+		compatible = "thine,thc63lvd1024";
+		vcc-supply = <&vcc3v3_d5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				thc63lvd1024_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0 0x48000000 0 0x78000000>;
+	};
+
+	osc1_clk: osc1-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	vcc1v8_d4: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8_D4";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc3v3_d5: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3_D5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&osc1_clk>;
+	clock-names = "du.0", "dclkin.0";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		#sound-dai-cells = <0>;
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&vcc1v8_d4>;
+		dvdd-supply = <&vcc1v8_d4>;
+		pvdd-supply = <&vcc1v8_d4>;
+		bgvdd-supply = <&vcc1v8_d4>;
+		dvdd-3v-supply = <&vcc3v3_d5>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&thc63lvd1024_in>;
+			};
+		};
+	};
+};
+
+&pfc {
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_b";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
new file mode 100644
index 000000000..5ed2daaca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -0,0 +1,1625 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3H (R8A77980) SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/clock/r8a77980-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77980-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77980";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller {
+			compatible = "cache";
+			power-domains = <&sysc R8A77980_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77980-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 25>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77980";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77980-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77980-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77980-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77980-rst";
+			reg = <0 0xe6160000 0 0x200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77980-sysc";
+			reg = <0 0xe6180000 0 0x440>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a77980-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77980", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>,
+			       <&dmac2 0x9b>, <&dmac2 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77980",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+			       <&dmac2 0x37>, <&dmac2 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy@e65d0000 {
+			compatible = "renesas,r8a77980-pcie-phy";
+			reg = <0 0xe65d0000 0 0x8000>;
+			#phy-cells = <0>;
+			clocks = <&cpg CPG_MOD 319>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77980-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A77980_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77980_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77980",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <2000>;
+			iommus = <&ipmmu_ds1 33>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77980", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+			       <&dmac2 0x57>, <&dmac2 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77980",
+				     "renesas,rcar-gen3-scif",
+				     "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77980_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+			       <&dmac2 0x59>, <&dmac2 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77980", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77980",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin0: video@e6ef0000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin0csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin0>;
+					};
+				};
+			};
+		};
+
+		vin1: video@e6ef1000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			status = "disabled";
+			renesas,id = <1>;
+			resets = <&cpg 810>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin1csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin1>;
+					};
+				};
+			};
+		};
+
+		vin2: video@e6ef2000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin2csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin2>;
+					};
+				};
+			};
+		};
+
+		vin3: video@e6ef3000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin3csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin3>;
+					};
+				};
+			};
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin5>;
+					};
+				};
+			};
+		};
+
+		vin6: video@e6ef6000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin6csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin6>;
+					};
+				};
+			};
+		};
+
+		vin7: video@e6ef7000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin7csi41: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&csi41vin7>;
+					};
+				};
+			};
+		};
+
+		vin8: video@e6ef8000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			renesas,id = <8>;
+			status = "disabled";
+		};
+
+		vin9: video@e6ef9000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 627>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 627>;
+			renesas,id = <9>;
+			status = "disabled";
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 625>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 625>;
+			renesas,id = <10>;
+			status = "disabled";
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			renesas,id = <11>;
+			status = "disabled";
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 612>;
+			renesas,id = <12>;
+			status = "disabled";
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 608>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 608>;
+			renesas,id = <13>;
+			status = "disabled";
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 605>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 605>;
+			renesas,id = <14>;
+			status = "disabled";
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a77980";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 604>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 604>;
+			renesas,id = <15>;
+			status = "disabled";
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77980",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77980",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		gether: ethernet@e7400000 {
+			compatible = "renesas,gether-r8a77980";
+			reg = <0 0xe7400000 0 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 11>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77980",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77980_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77980-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(4) |
+				      IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77980",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			phys = <&pcie_phy>;
+			phy-names = "pcie";
+			iommu-map = <0 &ipmmu_vi0 5 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77980-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin0csi40>;
+					};
+					csi40vin1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin1csi40>;
+					};
+					csi40vin2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin2csi40>;
+					};
+					csi40vin3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin3csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a77980-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi41vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi41>;
+					};
+					csi41vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi41>;
+					};
+					csi41vin6: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&vin6csi41>;
+					};
+					csi41vin7: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&vin7csi41>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77980-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1-passive {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+				sensor1-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2-passive {
+					temperature = <95000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+				sensor2-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+				       IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts
new file mode 100644
index 000000000..53fc21709
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980a-condor-i.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Condor-I board on r8a77980A (ES2.0)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77980a.dtsi"
+#include "condor-common.dtsi"
+
+/ {
+	model = "Renesas Condor-I board based on r8a77980A (ES2.0)";
+	compatible = "renesas,condor-i", "renesas,r8a77980a", "renesas,r8a77980";
+};
+
+&mmc0 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980a.dtsi b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi
new file mode 100644
index 000000000..83f5e2111
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77980a.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car V3H2 (R8A77980A) SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#include "r8a77980.dtsi"
+
+/ {
+	compatible = "renesas,r8a77980a", "renesas,r8a77980";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
new file mode 100644
index 000000000..9da0fd08f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Ebisu board with R-Car E3
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a77990.dtsi"
+#include "ebisu.dtsi"
+
+/ {
+	model = "Renesas Ebisu board based on r8a77990";
+	compatible = "renesas,ebisu", "renesas,r8a77990";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
new file mode 100644
index 000000000..4c545eff9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -0,0 +1,2154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car E3 (R8A77990) SoC
+ *
+ * Copyright (C) 2018-2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a77990-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77990";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A77990_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A77990_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77990_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <700>;
+				exit-latency-us = <700>;
+				min-residency-us = <5000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77990-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 23>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 11>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 20>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77990",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77990";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a77990",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77990-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77990-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77990-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77990-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77990-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77990";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77990", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77990", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@e6690000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77990",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6690000 0 0x40>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1003>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 1003>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77990",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77990",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77990-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77990",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77990",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77990",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77990-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77990_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77990",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x5b>, <&dmac0 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77990",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77990";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin4csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin4>;
+					};
+				};
+			};
+		};
+
+		vin5: video@e6ef5000 {
+			compatible = "renesas,vin-r8a77990";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					vin5csi40: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&csi40vin5>;
+					};
+				};
+			};
+		};
+
+		drif00: rif@e6f40000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f40000 0 0x84>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x20>, <&dmac2 0x20>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			renesas,bonding = <&drif01>;
+			status = "disabled";
+		};
+
+		drif01: rif@e6f50000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f50000 0 0x84>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x22>, <&dmac2 0x22>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			renesas,bonding = <&drif00>;
+			status = "disabled";
+		};
+
+		drif10: rif@e6f60000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f60000 0 0x84>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 513>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x24>, <&dmac2 0x24>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 513>;
+			renesas,bonding = <&drif11>;
+			status = "disabled";
+		};
+
+		drif11: rif@e6f70000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f70000 0 0x84>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 512>;
+			clock-names = "fck";
+			dmas = <&dmac1 0x26>, <&dmac2 0x26>;
+			dma-names = "rx", "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 512>;
+			renesas,bonding = <&drif10>;
+			status = "disabled";
+		};
+
+		drif20: rif@e6f80000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f80000 0 0x84>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 511>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x28>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 511>;
+			renesas,bonding = <&drif21>;
+			status = "disabled";
+		};
+
+		drif21: rif@e6f90000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6f90000 0 0x84>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 510>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x2a>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 510>;
+			renesas,bonding = <&drif20>;
+			status = "disabled";
+		};
+
+		drif30: rif@e6fa0000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fa0000 0 0x84>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 509>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x2c>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+			renesas,bonding = <&drif31>;
+			status = "disabled";
+		};
+
+		drif31: rif@e6fb0000 {
+			compatible = "renesas,r8a77990-drif",
+				     "renesas,rcar-gen3-drif";
+			reg = <0 0xe6fb0000 0 0x84>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 508>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x2e>;
+			dma-names = "rx";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+			renesas,bonding = <&drif30>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma0 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma0 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma0 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma0 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77990-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77990",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		usb3_peri0: usb@ee020000 {
+			compatible = "renesas,r8a77990-usb3-peri",
+				     "renesas,rcar-gen3-usb3-peri";
+			reg = <0 0xee020000 0 0x400>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77990",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A77990_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A77990_CLK_SD1H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a77990",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A77990_CLK_SD3H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77990-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77990",
+				     "renesas,pcie-rcar-gen3";
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+				 <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+				 <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+				 <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR/IOMMU as inbound ranges */
+			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			iommu-map = <0 &ipmmu_hc 0 1>;
+			iommu-map-mask = <0>;
+			status = "disabled";
+		};
+
+		vspb0: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 626>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 626>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		vspi0: vsp@fe9a0000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe9a0000 0 0x8000>;
+			interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 631>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 631>;
+			renesas,fcp = <&fcpvi0>;
+		};
+
+		fcpvi0: fcp@fe9af000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe9af000 0 0x200>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+			iommus = <&ipmmu_vp0 8>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77990-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77990-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a77990-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+
+					csi40vin4: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vin4csi40>;
+					};
+					csi40vin5: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vin5csi40>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77990";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+
+			renesas,cmms = <&cmm0>, <&cmm1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77990-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a77990-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
new file mode 100644
index 000000000..384825617
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board with R-Car D3
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+/dts-v1/;
+#include "r8a77995.dtsi"
+#include "draak.dtsi"
+
+/ {
+	model = "Renesas Draak board based on r8a77995";
+	compatible = "renesas,draak", "renesas,r8a77995";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
new file mode 100644
index 000000000..e25024a7b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -0,0 +1,1473 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car D3 (R8A77995) SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+#include <dt-bindings/clock/r8a77995-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77995-sysc.h>
+
+/ {
+	compatible = "renesas,r8a77995";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a53_0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A77995_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A77995_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77995-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 9>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 10>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 21>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a77995",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 14>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		pfc: pinctrl@e6060000 {
+			compatible = "renesas,pfc-r8a77995";
+			reg = <0 0xe6060000 0 0x508>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a77995-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a77995-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a77995-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a77995-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a77995-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a77995-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a77995-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a77995", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a77995",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a77995",
+				     "renesas,rcar-gen3-usbhs";
+			reg = <0 0xe6590000 0 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			renesas,buswait = <11>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 704>, <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a77995-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a77995-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 914>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77995";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a77995",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <1800>;
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a77995",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a77995",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+			       <&cpg CPG_CORE R8A77995_CLK_CANFD>,
+			       <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A77995_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x64>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x64>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x64>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin4: video@e6ef4000 {
+			compatible = "renesas,vin-r8a77995";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <4>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required if simple-card
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+			clock-names = "ssi-all",
+				      "ssi.4", "ssi.3",
+				      "src.6", "src.5",
+				      "mix.1", "mix.0",
+				      "ctu.1", "ctu.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_i";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1011>, <&cpg 1012>;
+			reset-names = "ssi-all",
+				      "ssi.4", "ssi.3";
+			status = "disabled";
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,src {
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77995-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a77995",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+				 <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+				 <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+				 <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+				 <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+				 <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+				 <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+				 <&ipmmu_mp 14>, <&ipmmu_mp 15>;
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77995",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 703>, <&cpg 704>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a77995",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A77995_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77995-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		vspbs: vsp@fe960000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfe960000 0 0x8000>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 627>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 627>;
+			renesas,fcp = <&fcpvb0>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		fcpvb0: fcp@fe96f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfe96f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 607>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 607>;
+			iommus = <&ipmmu_vp0 5>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
+		};
+
+		fcpvd1: fcp@fea2f000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea2f000 0 0x200>;
+			clocks = <&cpg CPG_MOD 602>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
+		};
+
+		cmm0: cmm@fea40000 {
+			compatible = "renesas,r8a77995-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea40000 0 0x1000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 711>;
+			resets = <&cpg 711>;
+		};
+
+		cmm1: cmm@fea50000 {
+			compatible = "renesas,r8a77995-cmm",
+				     "renesas,rcar-gen3-cmm";
+			reg = <0 0xfea50000 0 0x1000>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 710>;
+			resets = <&cpg 710>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77995";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
+			resets = <&cpg 724>;
+			reset-names = "du.0";
+
+			renesas,cmms = <&cmm0>, <&cmm1>;
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					du_out_lvds1: endpoint {
+						remote-endpoint = <&lvds1_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77995-lvds";
+			reg = <0 0xfeb90000 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			renesas,companion = <&lvds1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		lvds1: lvds-encoder@feb90100 {
+			compatible = "renesas,r8a77995-lvds";
+			reg = <0 0xfeb90100 0 0x20>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds1_in: endpoint {
+						remote-endpoint = <&du_out_lvds1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
new file mode 100644
index 000000000..99b73e21c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CPU board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "r8a779a0.dtsi"
+
+/ {
+	model = "Renesas Falcon CPU board";
+	compatible = "renesas,falcon-cpu", "renesas,r8a779a0";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		serial0 = &scif0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW47";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW48";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			gpios = <&gpio6 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW49";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+		};
+		led-2 {
+			gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+		};
+		led-3 {
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x80000000>;
+	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	i2c6_pins: i2c6 {
+		groups = "i2c6";
+		function = "i2c6";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_6_18", "GP_6_19", "GP_6_20";
+		bias-pull-up;
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data", "scif0_ctrl";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0xcc0000>;
+				read-only;
+			};
+			user@cc0000 {
+				reg = <0xcc0000 0x3340000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
new file mode 100644
index 000000000..dbc8dcab1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CSI/DSI sub-board
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include <dt-bindings/media/video-interfaces.h>
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi42 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi42_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
+&csi43 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi43_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out2>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pca9654_a: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_b: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_c: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi42_in>;
+				};
+			};
+		};
+	};
+
+	gmsl2: gmsl-deserializer@6b {
+		compatible = "maxim,max96712";
+		reg = <0x6b>;
+		enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out2: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi43_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp2 {
+	status = "okay";
+};
+
+&isp3 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin16 {
+	status = "okay";
+};
+
+&vin17 {
+	status = "okay";
+};
+
+&vin18 {
+	status = "okay";
+};
+
+&vin19 {
+	status = "okay";
+};
+
+&vin20 {
+	status = "okay";
+};
+
+&vin21 {
+	status = "okay";
+};
+
+&vin22 {
+	status = "okay";
+};
+
+&vin23 {
+	status = "okay";
+};
+
+&vin24 {
+	status = "okay";
+};
+
+&vin25 {
+	status = "okay";
+};
+
+&vin26 {
+	status = "okay";
+};
+
+&vin27 {
+	status = "okay";
+};
+
+&vin28 {
+	status = "okay";
+};
+
+&vin29 {
+	status = "okay";
+};
+
+&vin30 {
+	status = "okay";
+};
+
+&vin31 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
new file mode 100644
index 000000000..e11bf9ace
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-ethernet.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon Ethernet sub-board
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+&i2c0 {
+	eeprom@53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
new file mode 100644
index 000000000..63db822e5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Falcon CPU and BreakOut boards with R-Car V3U
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779a0-falcon-cpu.dtsi"
+#include "r8a779a0-falcon-csi-dsi.dtsi"
+#include "r8a779a0-falcon-ethernet.dtsi"
+
+/ {
+	model = "Renesas Falcon CPU and Breakout boards based on r8a779a0";
+	compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0";
+
+	aliases {
+		ethernet0 = &avb0;
+	};
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
new file mode 100644
index 000000000..4e67a0356
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -0,0 +1,2915 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car V3U (R8A779A0) SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779a0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779a0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a76_0: cpu@0 {
+			compatible = "arm,cortex-a76";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779A0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76_0>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_Z0>;
+		};
+
+		L3_CA76_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779A0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779a0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779a0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
+			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
+			      <0 0xe6068000 0 0x16c>, <0 0xe6068800 0 0x16c>,
+			      <0 0xe6069000 0 0x16c>, <0 0xe6069800 0 0x16c>;
+		};
+
+		gpio0: gpio@e6058180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058180 0 0x54>;
+			interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 0 28>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 32 31>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 64 25>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@e6058980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058980 0 0x54>;
+			interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 96 17>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@e6060180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060180 0 0x54>;
+			interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 128 27>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@e6060980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060980 0 0x54>;
+			interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 160 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@e6068180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6068180 0 0x54>;
+			interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 192 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@e6068980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6068980 0 0x54>;
+			interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 224 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@e6069180 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6069180 0 0x54>;
+			interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 256 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio9: gpio@e6069980 {
+			compatible = "renesas,gpio-r8a779a0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6069980 0 0x54>;
+			interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 288 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779a0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779a0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779a0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779a0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779a0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779a0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779a0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6190000 {
+			compatible = "renesas,r8a779a0-thermal";
+			reg = <0 0xe6190000 0 0x200>,
+			      <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>,
+			      <0 0xe61b0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779a0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_CP>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 514 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			dmas = <&dmac1 0x99>, <&dmac1 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 524>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 524>;
+			dmas = <&dmac1 0x9d>, <&dmac1 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779a0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e6660000 {
+			compatible = "renesas,r8a779a0-canfd",
+				     "renesas,rcar-gen4-canfd";
+			reg = <0 0xe6660000 0 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 328>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A779A0_CLK_CANFD>;
+			assigned-clock-rates = <80000000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+
+			channel2 {
+				status = "disabled";
+			};
+
+			channel3 {
+				status = "disabled";
+			};
+
+			channel4 {
+				status = "disabled";
+			};
+
+			channel5 {
+				status = "disabled";
+			};
+
+			channel6 {
+				status = "disabled";
+			};
+
+			channel7 {
+				status = "disabled";
+			};
+		};
+
+		avb0: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 211>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb1: ethernet@e6810000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6810000 0 0x800>;
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 212>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 212>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb2: ethernet@e6820000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6820000 0 0x1000>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 213>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 213>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb3: ethernet@e6830000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6830000 0 0x1000>;
+			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 214>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 214>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb4: ethernet@e6840000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6840000 0 0x1000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 215>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 215>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb5: ethernet@e6850000 {
+			compatible = "renesas,etheravb-r8a779a0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6850000 0 0x1000>;
+			interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19",
+					"ch20", "ch21", "ch22", "ch23",
+					"ch24";
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a779a0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779a0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779A0_CLK_S1D2>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a779a0", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			dmas = <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			dmas = <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			dmas = <&dmac1 0x49>, <&dmac1 0x48>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779a0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			dmas = <&dmac1 0x4b>, <&dmac1 0x4a>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin00: video@e6ef0000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 730>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 730>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin00isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin00>;
+					};
+				};
+			};
+		};
+
+		vin01: video@e6ef1000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 731>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 731>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin01isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin01>;
+					};
+				};
+			};
+		};
+
+		vin02: video@e6ef2000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 800>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 800>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin02isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin02>;
+					};
+				};
+			};
+		};
+
+		vin03: video@e6ef3000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 801>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 801>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin03isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin03>;
+					};
+				};
+			};
+		};
+
+		vin04: video@e6ef4000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin04isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin04>;
+					};
+				};
+			};
+		};
+
+		vin05: video@e6ef5000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 803>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 803>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin05isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin05>;
+					};
+				};
+			};
+		};
+
+		vin06: video@e6ef6000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin06isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin06>;
+					};
+				};
+			};
+		};
+
+		vin07: video@e6ef7000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin07isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin07>;
+					};
+				};
+			};
+		};
+
+		vin08: video@e6ef8000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin08isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin08>;
+					};
+				};
+			};
+		};
+
+		vin09: video@e6ef9000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <9>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin09isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin09>;
+					};
+				};
+			};
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <10>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin10isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin10>;
+					};
+				};
+			};
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <11>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin11isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin11>;
+					};
+				};
+			};
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <12>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin12isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin12>;
+					};
+				};
+			};
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <13>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin13isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin13>;
+					};
+				};
+			};
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			renesas,id = <14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin14isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin14>;
+					};
+				};
+			};
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			renesas,id = <15>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin15isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin15>;
+					};
+				};
+			};
+		};
+
+		vin16: video@e6ed0000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed0000 0 0x1000>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			renesas,id = <16>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin16isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin16>;
+					};
+				};
+			};
+		};
+
+		vin17: video@e6ed1000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed1000 0 0x1000>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			renesas,id = <17>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin17isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin17>;
+					};
+				};
+			};
+		};
+
+		vin18: video@e6ed2000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed2000 0 0x1000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 816>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 816>;
+			renesas,id = <18>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin18isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin18>;
+					};
+				};
+			};
+		};
+
+		vin19: video@e6ed3000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed3000 0 0x1000>;
+			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 817>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 817>;
+			renesas,id = <19>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin19isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin19>;
+					};
+				};
+			};
+		};
+
+		vin20: video@e6ed4000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed4000 0 0x1000>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 818>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 818>;
+			renesas,id = <20>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin20isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin20>;
+					};
+				};
+			};
+		};
+
+		vin21: video@e6ed5000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed5000 0 0x1000>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 819>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 819>;
+			renesas,id = <21>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin21isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin21>;
+					};
+				};
+			};
+		};
+
+		vin22: video@e6ed6000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed6000 0 0x1000>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 820>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 820>;
+			renesas,id = <22>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin22isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin22>;
+					};
+				};
+			};
+		};
+
+		vin23: video@e6ed7000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed7000 0 0x1000>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 821>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 821>;
+			renesas,id = <23>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin23isp2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&isp2vin23>;
+					};
+				};
+			};
+		};
+
+		vin24: video@e6ed8000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed8000 0 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 822>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 822>;
+			renesas,id = <24>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin24isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin24>;
+					};
+				};
+			};
+		};
+
+		vin25: video@e6ed9000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ed9000 0 0x1000>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 823>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 823>;
+			renesas,id = <25>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin25isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin25>;
+					};
+				};
+			};
+		};
+
+		vin26: video@e6eda000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6eda000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 824>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 824>;
+			renesas,id = <26>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin26isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin26>;
+					};
+				};
+			};
+		};
+
+		vin27: video@e6edb000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edb000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 825>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 825>;
+			renesas,id = <27>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin27isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin27>;
+					};
+				};
+			};
+		};
+
+		vin28: video@e6edc000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edc000 0 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 826>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 826>;
+			renesas,id = <28>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin28isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin28>;
+					};
+				};
+			};
+		};
+
+		vin29: video@e6edd000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edd000 0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 827>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 827>;
+			renesas,id = <29>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin29isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin29>;
+					};
+				};
+			};
+		};
+
+		vin30: video@e6ede000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6ede000 0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 828>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 828>;
+			renesas,id = <30>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin30isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin30>;
+					};
+				};
+			};
+		};
+
+		vin31: video@e6edf000 {
+			compatible = "renesas,vin-r8a779a0";
+			reg = <0 0xe6edf000 0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 829>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 829>;
+			renesas,id = <31>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin31isp3: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&isp3vin31>;
+					};
+				};
+			};
+		};
+
+		dmac1: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779a0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779a0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <8>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779a0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779A0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779a0-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@eed80000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@eedc0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeedc0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@eee80000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@eeec0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeeec0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_3dg: iommu@eee00000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@eef00000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@eef40000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779a0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fcpvd0: fcp@fea10000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea10000 0 0x200>;
+			clocks = <&cpg CPG_MOD 508>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+		};
+
+		fcpvd1: fcp@fea11000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea11000 0 0x200>;
+			clocks = <&cpg CPG_MOD 509>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 830>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 830>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x5000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 831>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 831>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		csi40: csi2@feaa0000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfeaa0000 0 0x10000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi40isp0: endpoint {
+						remote-endpoint = <&isp0csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@feab0000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfeab0000 0 0x10000>;
+			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 400>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 400>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi41isp1: endpoint {
+						remote-endpoint = <&isp1csi41>;
+					};
+				};
+			};
+		};
+
+		csi42: csi2@fed60000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfed60000 0 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 401>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 401>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi42isp2: endpoint {
+						remote-endpoint = <&isp2csi42>;
+					};
+				};
+			};
+		};
+
+		csi43: csi2@fed70000 {
+			compatible = "renesas,r8a779a0-csi2";
+			reg = <0 0xfed70000 0 0x10000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi43isp3: endpoint {
+						remote-endpoint = <&isp3csi43>;
+					};
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779a0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_dsi1: endpoint {
+						remote-endpoint = <&dsi1_in>;
+					};
+				};
+			};
+		};
+
+		isp0: isp@fed00000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed00000 0 0x10000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 612>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp0csi40: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi40isp0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp0vin00: endpoint {
+						remote-endpoint = <&vin00isp0>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp0vin01: endpoint {
+						remote-endpoint = <&vin01isp0>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp0vin02: endpoint {
+						remote-endpoint = <&vin02isp0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp0vin03: endpoint {
+						remote-endpoint = <&vin03isp0>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp0vin04: endpoint {
+						remote-endpoint = <&vin04isp0>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp0vin05: endpoint {
+						remote-endpoint = <&vin05isp0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp0vin06: endpoint {
+						remote-endpoint = <&vin06isp0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp0vin07: endpoint {
+						remote-endpoint = <&vin07isp0>;
+					};
+				};
+			};
+		};
+
+		isp1: isp@fed20000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed20000 0 0x10000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP01>;
+			resets = <&cpg 613>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp1csi41: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi41isp1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp1vin08: endpoint {
+						remote-endpoint = <&vin08isp1>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp1vin09: endpoint {
+						remote-endpoint = <&vin09isp1>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp1vin10: endpoint {
+						remote-endpoint = <&vin10isp1>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp1vin11: endpoint {
+						remote-endpoint = <&vin11isp1>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp1vin12: endpoint {
+						remote-endpoint = <&vin12isp1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp1vin13: endpoint {
+						remote-endpoint = <&vin13isp1>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp1vin14: endpoint {
+						remote-endpoint = <&vin14isp1>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp1vin15: endpoint {
+						remote-endpoint = <&vin15isp1>;
+					};
+				};
+			};
+		};
+
+		isp2: isp@fed30000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed30000 0 0x10000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 614>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 614>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp2csi42: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi42isp2>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp2vin16: endpoint {
+						remote-endpoint = <&vin16isp2>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp2vin17: endpoint {
+						remote-endpoint = <&vin17isp2>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp2vin18: endpoint {
+						remote-endpoint = <&vin18isp2>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp2vin19: endpoint {
+						remote-endpoint = <&vin19isp2>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp2vin20: endpoint {
+						remote-endpoint = <&vin20isp2>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp2vin21: endpoint {
+						remote-endpoint = <&vin21isp2>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp2vin22: endpoint {
+						remote-endpoint = <&vin22isp2>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp2vin23: endpoint {
+						remote-endpoint = <&vin23isp2>;
+					};
+				};
+			};
+		};
+
+		isp3: isp@fed40000 {
+			compatible = "renesas,r8a779a0-isp";
+			reg = <0 0xfed40000 0 0x10000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 615>;
+			power-domains = <&sysc R8A779A0_PD_A3ISP23>;
+			resets = <&cpg 615>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp3csi43: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi43isp3>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp3vin24: endpoint {
+						remote-endpoint = <&vin24isp3>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp3vin25: endpoint {
+						remote-endpoint = <&vin25isp3>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp3vin26: endpoint {
+						remote-endpoint = <&vin26isp3>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp3vin27: endpoint {
+						remote-endpoint = <&vin27isp3>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp3vin28: endpoint {
+						remote-endpoint = <&vin28isp3>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp3vin29: endpoint {
+						remote-endpoint = <&vin29isp3>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp3vin30: endpoint {
+						remote-endpoint = <&vin30isp3>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp3vin31: endpoint {
+						remote-endpoint = <&vin31isp3>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi-encoder@fed80000 {
+			compatible = "renesas,r8a779a0-dsi-csi2-tx";
+			reg = <0 0xfed80000 0 0x10000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 415>,
+				 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+			clock-names = "fck", "dsi", "pll";
+			resets = <&cpg 415>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		dsi1: dsi-encoder@fed90000 {
+			compatible = "renesas,r8a779a0-dsi-csi2-tx";
+			reg = <0 0xfed90000 0 0x10000>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+				 <&cpg CPG_CORE R8A779A0_CLK_CL16MCK>;
+			clock-names = "fck", "dsi", "pll";
+			resets = <&cpg 416>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+						remote-endpoint = <&du_out_dsi1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor1_thermal: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor2_thermal: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor3_thermal: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor4_thermal: sensor4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 3>;
+
+			trips {
+				sensor4_crit: sensor4-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor5_thermal: sensor5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 4>;
+
+			trips {
+				sensor5_crit: sensor5-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
new file mode 100644
index 000000000..5cbde8e8f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Spider CPU board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "r8a779f0.dtsi"
+
+/ {
+	model = "Renesas Spider CPU board";
+	compatible = "renesas,spider-cpu", "renesas,r8a779f0";
+
+	aliases {
+		serial0 = &hscif0;
+		serial1 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:1843200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-7 {
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>;
+		};
+
+		led-8 {
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <8>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	rc21012_ufs: clk-rc21012-ufs {
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+		#clock-cells = <0>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gpio_exp_20: gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+/*
+ * This board also has a microSD slot which we will not support upstream
+ * because we cannot directly switch voltages in software.
+ */
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c4_pins: i2c4 {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data", "scif0_ctrl";
+		function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
+
+&ufs {
+	status = "okay";
+};
+
+&ufs30_clk {
+	compatible = "gpio-gate-clock";
+	clocks = <&rc21012_ufs>;
+	enable-gpios = <&gpio_exp_20 4 GPIO_ACTIVE_LOW>;
+	/delete-property/ clock-frequency;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
new file mode 100644
index 000000000..33c1015e9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Spider Ethernet sub-board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+&eth_serdes {
+	status = "okay";
+};
+
+&i2c4 {
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	tsn0_pins: tsn0 {
+		groups = "tsn0_mdio_b", "tsn0_link_b";
+		function = "tsn0";
+		power-source = <1800>;
+	};
+
+	tsn1_pins: tsn1 {
+		groups = "tsn1_mdio_b", "tsn1_link_b";
+		function = "tsn1";
+		power-source = <1800>;
+	};
+
+	tsn2_pins: tsn2 {
+		groups = "tsn2_mdio_b", "tsn2_link_b";
+		function = "tsn2";
+		power-source = <1800>;
+	};
+};
+
+&rswitch {
+	pinctrl-0 = <&tsn0_pins>, <&tsn1_pins>, <&tsn2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-handle = <&u101>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 0>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u101: ethernet-phy@1 {
+					reg = <1>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@1 {
+			reg = <1>;
+			phy-handle = <&u201>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 1>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u201: ethernet-phy@2 {
+					reg = <2>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+		port@2 {
+			reg = <2>;
+			phy-handle = <&u301>;
+			phy-mode = "sgmii";
+			phys = <&eth_serdes 2>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				u301: ethernet-phy@3 {
+					reg = <3>;
+					compatible = "ethernet-phy-ieee802.3-c45";
+					interrupt-parent = <&gpio3>;
+					interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
new file mode 100644
index 000000000..f139cc4fe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Spider CPU and BreakOut boards
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779f0-spider-cpu.dtsi"
+#include "r8a779f0-spider-ethernet.dtsi"
+
+/ {
+	model = "Renesas Spider CPU and Breakout boards based on r8a779f0";
+	compatible = "renesas,spider-breakout", "renesas,spider-cpu", "renesas,r8a779f0";
+};
+
+&i2c4 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
new file mode 100644
index 000000000..ecdd5a523
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -0,0 +1,1193 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car S4-8 (R8A779F0) SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779f0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779f0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cluster01_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+	};
+
+	cluster23_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a55_0>;
+				};
+				core1 {
+					cpu = <&a55_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a55_2>;
+				};
+				core1 {
+					cpu = <&a55_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&a55_4>;
+				};
+				core1 {
+					cpu = <&a55_5>;
+				};
+			};
+
+			cluster3 {
+				core0 {
+					cpu = <&a55_6>;
+				};
+				core1 {
+					cpu = <&a55_7>;
+				};
+			};
+		};
+
+		a55_0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA55_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA55_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_2: cpu@10000 {
+			compatible = "arm,cortex-a55";
+			reg = <0x10000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D1C0>;
+			next-level-cache = <&L3_CA55_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_3: cpu@10100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x10100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E0D1C1>;
+			next-level-cache = <&L3_CA55_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z0>;
+			operating-points-v2 = <&cluster01_opp>;
+		};
+
+		a55_4: cpu@20000 {
+			compatible = "arm,cortex-a55";
+			reg = <0x20000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D0C0>;
+			next-level-cache = <&L3_CA55_2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		a55_5: cpu@20100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x20100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D0C1>;
+			next-level-cache = <&L3_CA55_2>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		a55_6: cpu@30000 {
+			compatible = "arm,cortex-a55";
+			reg = <0x30000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D1C0>;
+			next-level-cache = <&L3_CA55_3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		a55_7: cpu@30100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x30100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779F0_PD_A1E1D1C1>;
+			next-level-cache = <&L3_CA55_3>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_Z1>;
+			operating-points-v2 = <&cluster23_opp>;
+		};
+
+		L3_CA55_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA55_1: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E0D1>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA55_2: cache-controller-2 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E1D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA55_3: cache-controller-3 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779F0_PD_A2E1D1>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779f0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779f0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>;
+		};
+
+		gpio0: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 0 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 32 25>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@e6051180 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6051180 0 0x54>;
+			interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 64 17>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@e6051980 {
+			compatible = "renesas,gpio-r8a779f0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6051980 0 0x54>;
+			interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 96 19>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779f0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779f0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779f0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779f0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779f0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779f0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779f0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a779f0-thermal";
+			/* The 4th sensor is in control domain and not for Linux */
+			reg = <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779f0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779F0_CLK_CL16M>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 483 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779f0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		eth_serdes: phy@e6444000 {
+			compatible = "renesas,r8a779f0-ether-serdes";
+			reg = <0 0xe6444000 0 0x2800>;
+			clocks = <&cpg CPG_MOD 1506>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1506>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+			       <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+			       <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+			       <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+			       <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+			       <&dmac1 0x99>, <&dmac1 0x98>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779f0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+			       <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+			       <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+			       <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+			       <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779f0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+			       <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		ufs: ufs@e6860000 {
+			compatible = "renesas,r8a779f0-ufs";
+			reg = <0 0xe6860000 0 0x100>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+			clock-names = "fck", "ref_clk";
+			freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1514>;
+			status = "disabled";
+		};
+
+		rswitch: ethernet@e6880000 {
+			compatible = "renesas,r8a779f0-ether-switch";
+			reg = <0 0xe6880000 0 0x20000>, <0 0xe68c0000 0 0x20000>;
+			reg-names = "base", "secure_base";
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mfwd_error", "race_error",
+					  "coma_error", "gwca0_error",
+					  "gwca1_error", "etha0_error",
+					  "etha1_error", "etha2_error",
+					  "gptp0_status", "gptp1_status",
+					  "mfwd_status", "race_status",
+					  "coma_status", "gwca0_status",
+					  "gwca1_status", "etha0_status",
+					  "etha1_status", "etha2_status",
+					  "rmac0_status", "rmac1_status",
+					  "rmac2_status",
+					  "gwca0_rxtx0", "gwca0_rxtx1",
+					  "gwca0_rxtx2", "gwca0_rxtx3",
+					  "gwca0_rxtx4", "gwca0_rxtx5",
+					  "gwca0_rxtx6", "gwca0_rxtx7",
+					  "gwca1_rxtx0", "gwca1_rxtx1",
+					  "gwca1_rxtx2", "gwca1_rxtx3",
+					  "gwca1_rxtx4", "gwca1_rxtx5",
+					  "gwca1_rxtx6", "gwca1_rxtx7",
+					  "gwca0_rxts0", "gwca0_rxts1",
+					  "gwca1_rxts0", "gwca1_rxts1",
+					  "rmac0_mdio", "rmac1_mdio",
+					  "rmac2_mdio",
+					  "rmac0_phy", "rmac1_phy",
+					  "rmac2_phy";
+			clocks = <&cpg CPG_MOD 1505>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1505>;
+			status = "disabled";
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phys = <&eth_serdes 0>;
+				};
+				port@1 {
+					reg = <1>;
+					phys = <&eth_serdes 1>;
+				};
+				port@2 {
+					reg = <2>;
+					phys = <&eth_serdes 2>;
+				};
+			};
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+			       <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+			       <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+			       <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779f0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779F0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+			       <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x40>,
+			       <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>,
+			       <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>,
+			       <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779f0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>,
+			       <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779f0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779f0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+				 <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+				 <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>,
+				 <&ipmmu_ds0 24>, <&ipmmu_ds0 25>,
+				 <&ipmmu_ds0 26>, <&ipmmu_ds0 27>,
+				 <&ipmmu_ds0 28>, <&ipmmu_ds0 29>,
+				 <&ipmmu_ds0 30>, <&ipmmu_ds0 31>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779f0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>, <&cpg CPG_CORE R8A779F0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779f0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal_rtcore: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_apcore0: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_apcore4: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	ufs30_clk: ufs30-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
new file mode 100644
index 000000000..e6f53377e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ard-audio-da7212.dtso
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the White Hawk board with ARD-AUDIO-DA7212 Board
+ *
+ * You can find and buy "ARD-AUDIO-DA7212" at Digi-Key
+ *
+ *	https://www.digikey.jp/en/products/detail/ARD-AUDIO-DA7212/1564-1021-ND/5456357
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * White Hawk				ARD-AUDIO-DA7212
+ * +----------------------------+
+ * |CPU board			|
+ * |				|
+ * |CN40 (IO PIN HEADER)	|
+ * |	AUDIO_CLKIN_V	  pin1  |<--\	+---------------+
+ * |(*) GP1_25/SL_SW2_V	  pin2  |<--/	|J2		|
+ * |	AUDIO_CLKOUT_V	  pin5  |<----->| pin7  MCLK	|
+ * |	SSI_SCK_V	  pin9  |<----->| pin1  BCLK	|
+ * |	SSI_WS_V	  pin13 |<----->| pin3  WCLK	|
+ * |	SSI_SD_V	  pin15 |<----->| pin5  DATIN	| (@)
+ * |				|   \-->| pin15 DATOUT	| [CAPTURE]
+ * +----------------------------+	+---------------+
+ * +----------------------------+
+ * |Breakout board		|
+ * |				|	+---------------+
+ * |CN34 (I2C CN)		|	|J1		|
+ * |	I2C0_SCL	   pin3 |<----->| pin20 SCL	|
+ * |	I2C0_SDA	   pin5 |<----->| pin18 SDA	|
+ * |				|	+---------------+
+ * |				|	+-----------------------+
+ * |CN4 (Power)		        |	|J7			|
+ * |	3v3 (v)		   pin9 |<----->| pin4  / pin8  3.3v	|
+ * |	GND (v)	    pin3 / pin4 |<----->| pin12 / pin14 GND	|
+ * +----------------------------+	+-----------------------+
+ * (*)	GP1_25/SL_SW2_V is used as TPU
+ * (@)	Connect to pin5 (DATIN = playback) or pin15 (DATOUT = capture)
+ * (v)	These are just sample pins. You can find many 3v3 / GND pins on
+ *	White Hawk board, not only CN4. You can use other pins for it.
+ *
+ * [How to enable]
+ *
+ * You need these configs
+ *
+ *	CONFIG_PWM
+ *	CONFIG_PWM_RENESAS_TPU
+ *	CONFIG_COMMON_CLK_PWM
+ *	CONFIG_SND_SOC_DA7213
+ *
+ * [How to use]
+ *
+ * 44.1kHz groups sound is available by default.
+ * You need to update audio_clkin settings to switch to 48kHz groups sound.
+ * see
+ *	[(C) clock]
+ *
+ * You can use capture if you change the settings
+ * see
+ *	[CAPTURE]
+ *
+ * You need to setup Headphone
+ *
+ *	> amixer set "Headphone" 40%
+ *	> amixer set "Headphone" on
+ *	> amixer set "Mixout Left DAC Left" on
+ *	> amixer set "Mixout Right DAC Right" on
+ */
+
+/dts-v1/;
+/plugin/;
+#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+
+&{/} {
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+
+		dais = <&rsnd_port>;	/* DA7212 Audio Codec */
+	};
+
+	tpu_clk: tpu-clk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+
+		/* 44.1kHz groups [(C) clock] */
+		clock-frequency = <11289600>;
+		pwms = <&tpu 0 88 0>;	/* 1000000000 / 88 =~ 11289600 */
+
+		/* 48  kHz groups [(C) clock] */
+//		clock-frequency = <12288000>;
+//		pwms = <&tpu 0 81 0>;	/* 1000000000 / 81 =~ 12288000 */
+	};
+
+};
+
+&pfc {
+	sound_pins: sound {
+		groups = "ssi_ctrl", "ssi_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clkin", "audio_clkout";
+		function = "audio_clk";
+	};
+
+	tpu0_pins: tpu0 {
+		groups = "tpu_to0_a";
+		function = "tpu";
+	};
+};
+
+&tpu {
+	pinctrl-0 = <&tpu0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	codec@1a {
+		compatible = "dlg,da7212";
+
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+
+		clocks = <&rcar_sound>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl = <2500>;
+		dlg,micbias2-lvl = <2500>;
+		dlg,dmic-data-sel = "lrise_rfall";
+		dlg,dmic-samplephase = "between_clkedge";
+		dlg,dmic-clkrate = <3000000>;
+
+		VDDA-supply   = <&reg_1p8v>;
+		VDDMIC-supply = <&reg_3p3v>;
+		VDDIO-supply  = <&reg_3p3v>;
+
+		port {
+			da7212_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>, <&sound_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout */
+	#clock-cells = <0>;
+	clock-frequency = <5644800>; /* 44.1kHz groups [(C) clock] */
+//	clock-frequency = <6144000>; /* 48  kHz groups [(C) clock] */
+
+	status = "okay";
+
+	/* Update <clkin> to <tpu_clk> */
+	clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&tpu_clk>;
+
+	ports {
+		rsnd_port: port {
+			rsnd_endpoint: endpoint {
+				remote-endpoint = <&da7212_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint>;
+				frame-master = <&rsnd_endpoint>;
+
+				/* Mutually exclusive with 'capture' */
+				playback = <&ssi0>;
+				/* [CAPTURE] */
+				/* capture = <&ssi0>; */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
new file mode 100644
index 000000000..913f70fe6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk CPU board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include "r8a779g0.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Renesas White Hawk CPU board";
+	compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+	aliases {
+		ethernet0 = &avb0;
+		serial0 = &hscif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:921600n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW47";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW48";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW49";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+		};
+
+		led-2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+		};
+
+		led-3 {
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+		};
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+
+	mini-dp-con {
+		compatible = "dp-connector";
+		label = "CN5";
+		type = "mini";
+
+		port {
+			mini_dp_con_in: endpoint {
+				remote-endpoint = <&sn65dsi86_out>;
+			};
+		};
+	};
+
+	reg_1p2v: regulator-1p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sn65dsi86_refclk: clk-x6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <38400000>;
+	};
+};
+
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			dsi0_out: endpoint {
+				remote-endpoint = <&sn65dsi86_in>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander_a: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "cpu-board";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	bridge@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+
+		clocks = <&sn65dsi86_refclk>;
+		clock-names = "refclk";
+
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		enable-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+
+		vccio-supply = <&reg_1p8v>;
+		vpll-supply = <&reg_1p8v>;
+		vcca-supply = <&reg_1p2v>;
+		vcc-supply = <&reg_1p2v>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				sn65dsi86_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				sn65dsi86_out: endpoint {
+					remote-endpoint = <&mini_dp_con_in>;
+				};
+			};
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-1 = <&mmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data";
+		function = "hscif0";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_0", "GP_5_1", "GP_5_2";
+		bias-pull-up;
+	};
+
+	mmc_pins: mmc {
+		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
+		function = "mmc";
+		power-source = <1800>;
+	};
+
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x0 0x1200000>;
+				read-only;
+			};
+			user@1200000 {
+				reg = <0x1200000 0x2e00000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
new file mode 100644
index 000000000..f8537f7ea
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-csi-dsi.dtsi
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H White Hawk CSI/DSI sub-board
+ *
+ * Copyright (C) 2022 Glider bv
+ */
+
+#include <dt-bindings/media/video-interfaces.h>
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pca9654_a: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9654_b: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom@52 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "csi-dsi-sub-board-id";
+		reg = <0x52>;
+		pagesize = <8>;
+	};
+};
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					bus-type = <MEDIA_BUS_TYPE_CSI2_CPHY>;
+					clock-lanes = <0>;
+					data-lanes = <1 2 3>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi
new file mode 100644
index 000000000..4f411f95c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-ethernet.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1)
+ * sub-board
+ *
+ * Copyright (C) 2022 Glider bv
+ */
+
+&i2c0 {
+	eeprom@53 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "ethernet-sub-board-id";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
new file mode 100644
index 000000000..eff1ef6e2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk CPU and BreakOut boards
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779g0-white-hawk-cpu.dtsi"
+#include "r8a779g0-white-hawk-csi-dsi.dtsi"
+#include "r8a779g0-white-hawk-ethernet.dtsi"
+
+/ {
+	model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
+	compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+	can_transceiver0: can-phy0 {
+		compatible = "nxp,tjr1443";
+		#phy-cells = <0>;
+		enable-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&can_clk {
+	clock-frequency = <40000000>;
+};
+
+&canfd {
+	pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>, <&can_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+		phys = <&can_transceiver0>;
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	eeprom@51 {
+		compatible = "rohm,br24g01", "atmel,24c01";
+		label = "breakout-board";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&pfc {
+	can_clk_pins: can-clk {
+		groups = "can_clk";
+		function = "can_clk";
+	};
+
+	canfd0_pins: canfd0 {
+		groups = "canfd0_data";
+		function = "canfd0";
+	};
+
+	canfd1_pins: canfd1 {
+		groups = "canfd1_data";
+		function = "canfd1";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
new file mode 100644
index 000000000..d3d25e077
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -0,0 +1,2349 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H (R8A779G0) SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779g0-sysc.h>
+
+/ {
+	compatible = "renesas,r8a779g0";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* External Audio clock - to be overridden by boards that provide it */
+	audio_clkin: audio_clkin {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <825000>;
+			clock-latency-ns = <500000>;
+			opp-suspend;
+		};
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <880000>;
+			clock-latency-ns = <500000>;
+			turbo-mode;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a76_0>;
+				};
+				core1 {
+					cpu = <&a76_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a76_2>;
+				};
+				core1 {
+					cpu = <&a76_3>;
+				};
+			};
+		};
+
+		a76_0: cpu@0 {
+			compatible = "arm,cortex-a76";
+			reg = <0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D0C0>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_1: cpu@100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D0C1>;
+			next-level-cache = <&L3_CA76_0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_2: cpu@10000 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10000>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C0>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		a76_3: cpu@10100 {
+			compatible = "arm,cortex-a76";
+			reg = <0x10100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A779G0_PD_A1E0D1C1>;
+			next-level-cache = <&L3_CA76_1>;
+			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			clocks = <&cpg CPG_CORE R8A779G0_CLK_Z0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+			};
+	       };
+
+		L3_CA76_0: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D0>;
+			cache-unified;
+			cache-level = <3>;
+		};
+
+		L3_CA76_1: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A779G0_PD_A2E0D1>;
+			cache-unified;
+			cache-level = <3>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	pmu_a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779g0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779g0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6058000 0 0x16c>, <0 0xe6058800 0 0x16c>,
+			      <0 0xe6060000 0 0x16c>, <0 0xe6060800 0 0x16c>,
+			      <0 0xe6061000 0 0x16c>, <0 0xe6061800 0 0x16c>,
+			      <0 0xe6068000 0 0x16c>;
+		};
+
+		gpio0: gpio@e6050180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050180 0 0x54>;
+			interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 0 19>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@e6050980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6050980 0 0x54>;
+			interrupts = <GIC_SPI 623 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 32 29>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@e6058180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058180 0 0x54>;
+			interrupts = <GIC_SPI 627 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 64 20>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@e6058980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6058980 0 0x54>;
+			interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 96 30>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@e6060180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060180 0 0x54>;
+			interrupts = <GIC_SPI 635 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 128 25>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@e6060980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6060980 0 0x54>;
+			interrupts = <GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 160 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@e6061180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6061180 0 0x54>;
+			interrupts = <GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 192 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@e6061980 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6061980 0 0x54>;
+			interrupts = <GIC_SPI 647 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 224 21>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@e6068180 {
+			compatible = "renesas,gpio-r8a779g0",
+				     "renesas,rcar-gen4-gpio";
+			reg = <0 0xe6068180 0 0x54>;
+			interrupts = <GIC_SPI 651 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pfc 0 256 14>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a779g0-cmt0",
+				     "renesas,rcar-gen4-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 910>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 911>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 912>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a779g0-cmt1",
+				     "renesas,rcar-gen4-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 913>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 913>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a779g0-cpg-mssr";
+			reg = <0 0xe6150000 0 0x4000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a779g0-rst";
+			reg = <0 0xe6160000 0 0x4000>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a779g0-sysc";
+			reg = <0 0xe6180000 0 0x4000>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a779g0-thermal";
+			reg = <0 0xe6198000 0 0x200>,
+			      <0 0xe61a0000 0 0x200>,
+			      <0 0xe61a8000 0 0x200>,
+			      <0 0xe61b0000 0 0x200>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779g0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 611>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 611>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 713>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 714>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 715>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a779g0", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+			       <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 611 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+			       <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 612 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+			       <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+			       <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			dma-names = "tx", "rx", "tx", "rx";
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+			       <&dmac1 0x99>, <&dmac1 0x98>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779g0",
+				     "renesas,rcar-gen4-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 615 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+			       <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 514>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x31>, <&dmac0 0x30>,
+			       <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 514>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 515>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x33>, <&dmac0 0x32>,
+			       <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 515>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x35>, <&dmac0 0x34>,
+			       <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a779g0",
+				     "renesas,rcar-gen4-hscif", "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>,
+			       <&dmac1 0x37>, <&dmac1 0x36>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		canfd: can@e6660000 {
+			compatible = "renesas,r8a779g0-canfd",
+				     "renesas,rcar-gen4-canfd";
+			reg = <0 0xe6660000 0 0x8500>;
+			interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch_int", "g_int";
+			clocks = <&cpg CPG_MOD 328>,
+				 <&cpg CPG_CORE R8A779G0_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A779G0_CLK_CANFD>;
+			assigned-clock-rates = <80000000>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+
+			channel2 {
+				status = "disabled";
+			};
+
+			channel3 {
+				status = "disabled";
+			};
+
+			channel4 {
+				status = "disabled";
+			};
+
+			channel5 {
+				status = "disabled";
+			};
+
+			channel6 {
+				status = "disabled";
+			};
+
+			channel7 {
+				status = "disabled";
+			};
+		};
+
+		avb0: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a779g0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15", "ch16", "ch17",
+					  "ch18", "ch19", "ch20", "ch21",
+					  "ch22", "ch23", "ch24";
+			clocks = <&cpg CPG_MOD 211>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb1: ethernet@e6810000 {
+			compatible = "renesas,etheravb-r8a779g0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6810000 0 0x800>;
+			interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15", "ch16", "ch17",
+					  "ch18", "ch19", "ch20", "ch21",
+					  "ch22", "ch23", "ch24";
+			clocks = <&cpg CPG_MOD 212>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 212>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		avb2: ethernet@e6820000 {
+			compatible = "renesas,etheravb-r8a779g0",
+				     "renesas,etheravb-rcar-gen4";
+			reg = <0 0xe6820000 0 0x1000>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15", "ch16", "ch17",
+					  "ch18", "ch19", "ch20", "ch21",
+					  "ch22", "ch23", "ch24";
+			clocks = <&cpg CPG_MOD 213>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 213>;
+			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm7: pwm@e6e37000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e37000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm8: pwm@e6e38000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e38000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		pwm9: pwm@e6e39000 {
+			compatible = "renesas,pwm-r8a779g0", "renesas,pwm-rcar";
+			reg = <0 0xe6e39000 0 0x10>;
+			#pwm-cells = <2>;
+			clocks = <&cpg CPG_MOD 628>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 628>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x51>, <&dmac0 0x50>,
+			       <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 702>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x53>, <&dmac0 0x52>,
+			       <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>,
+			       <&dmac1 0x57>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a779g0",
+				     "renesas,rcar-gen4-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 705>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SASYNCPERD1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>,
+			       <&dmac1 0x59>, <&dmac1 0x58>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 705>;
+			status = "disabled";
+		};
+
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a779g0", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 718>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 618>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x40>,
+			       <&dmac1 0x41>, <&dmac1 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 618>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 619>;
+			dmas = <&dmac0 0x43>, <&dmac0 0x42>,
+			       <&dmac1 0x43>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 619>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 620>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>,
+			       <&dmac1 0x45>, <&dmac1 0x44>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 620>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 621>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>,
+			       <&dmac1 0x47>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 621>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof4: spi@e6c20000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c20000 0 0x0064>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 622>;
+			dmas = <&dmac0 0x49>, <&dmac0 0x48>,
+			       <&dmac1 0x49>, <&dmac1 0x48>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 622>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof5: spi@e6c28000 {
+			compatible = "renesas,msiof-r8a779g0",
+				     "renesas,rcar-gen4-msiof";
+			reg = <0 0xe6c28000 0 0x0064>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			dmas = <&dmac0 0x4b>, <&dmac0 0x4a>,
+			       <&dmac1 0x4b>, <&dmac1 0x4a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		vin00: video@e6ef0000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef0000 0 0x1000>;
+			interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 730>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 730>;
+			renesas,id = <0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin00isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin00>;
+					};
+				};
+			};
+		};
+
+		vin01: video@e6ef1000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef1000 0 0x1000>;
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 731>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 731>;
+			renesas,id = <1>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin01isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin01>;
+					};
+				};
+			};
+		};
+
+		vin02: video@e6ef2000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef2000 0 0x1000>;
+			interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 800>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 800>;
+			renesas,id = <2>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin02isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin02>;
+					};
+				};
+			};
+		};
+
+		vin03: video@e6ef3000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef3000 0 0x1000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 801>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 801>;
+			renesas,id = <3>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin03isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin03>;
+					};
+				};
+			};
+		};
+
+		vin04: video@e6ef4000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef4000 0 0x1000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			renesas,id = <4>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin04isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin04>;
+					};
+				};
+			};
+		};
+
+		vin05: video@e6ef5000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef5000 0 0x1000>;
+			interrupts = <GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 803>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 803>;
+			renesas,id = <5>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin05isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin05>;
+					};
+				};
+			};
+		};
+
+		vin06: video@e6ef6000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef6000 0 0x1000>;
+			interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 804>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 804>;
+			renesas,id = <6>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin06isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin06>;
+					};
+				};
+			};
+		};
+
+		vin07: video@e6ef7000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef7000 0 0x1000>;
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 805>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 805>;
+			renesas,id = <7>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin07isp0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&isp0vin07>;
+					};
+				};
+			};
+		};
+
+		vin08: video@e6ef8000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef8000 0 0x1000>;
+			interrupts = <GIC_SPI 537 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 806>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 806>;
+			renesas,id = <8>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin08isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin08>;
+					};
+				};
+			};
+		};
+
+		vin09: video@e6ef9000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6ef9000 0 0x1000>;
+			interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 807>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 807>;
+			renesas,id = <9>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin09isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin09>;
+					};
+				};
+			};
+		};
+
+		vin10: video@e6efa000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efa000 0 0x1000>;
+			interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 808>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 808>;
+			renesas,id = <10>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin10isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin10>;
+					};
+				};
+			};
+		};
+
+		vin11: video@e6efb000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efb000 0 0x1000>;
+			interrupts = <GIC_SPI 540 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 809>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 809>;
+			renesas,id = <11>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin11isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin11>;
+					};
+				};
+			};
+		};
+
+		vin12: video@e6efc000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efc000 0 0x1000>;
+			interrupts = <GIC_SPI 541 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 810>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 810>;
+			renesas,id = <12>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin12isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin12>;
+					};
+				};
+			};
+		};
+
+		vin13: video@e6efd000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efd000 0 0x1000>;
+			interrupts = <GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 811>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 811>;
+			renesas,id = <13>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin13isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin13>;
+					};
+				};
+			};
+		};
+
+		vin14: video@e6efe000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6efe000 0 0x1000>;
+			interrupts = <GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			renesas,id = <14>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin14isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin14>;
+					};
+				};
+			};
+		};
+
+		vin15: video@e6eff000 {
+			compatible = "renesas,vin-r8a779g0";
+			reg = <0 0xe6eff000 0 0x1000>;
+			interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			renesas,id = <15>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <2>;
+
+					vin15isp1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&isp1vin15>;
+					};
+				};
+			};
+		};
+
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779g0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 16>, <&ipmmu_ds0 17>,
+				 <&ipmmu_ds0 18>, <&ipmmu_ds0 19>,
+				 <&ipmmu_ds0 20>, <&ipmmu_ds0 21>,
+				 <&ipmmu_ds0 22>, <&ipmmu_ds0 23>,
+				 <&ipmmu_ds0 24>, <&ipmmu_ds0 25>,
+				 <&ipmmu_ds0 26>, <&ipmmu_ds0 27>,
+				 <&ipmmu_ds0 28>, <&ipmmu_ds0 29>,
+				 <&ipmmu_ds0 30>, <&ipmmu_ds0 31>;
+		};
+
+		rcar_sound: sound@ec5a0000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required
+			 *
+			 * clkout		: #clock-cells = <0>;	<&rcar_sound>;
+			 * audio_clkout0/1/2/3	: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a779g0", "renesas,rcar_sound-gen4";
+			reg = <0 0xec5a0000 0 0x020>,
+			      <0 0xec540000 0 0x1000>,
+			      <0 0xec541000 0 0x050>,
+			      <0 0xec400000 0 0x40000>;
+			reg-names = "adg", "ssiu", "ssi", "sdmc";
+
+			clocks = <&cpg CPG_MOD 2926>, <&cpg CPG_MOD 2927>, <&audio_clkin>;
+			clock-names = "ssiu.0", "ssi.0", "clkin";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 2926>, <&cpg 2927>;
+			reset-names = "ssiu.0", "ssi.0";
+			status = "disabled";
+
+			rcar_sound,ssiu {
+				ssiu00: ssiu-0 {
+					dmas = <&dmac0 0x6e>, <&dmac0 0x6f>;
+					dma-names = "tx", "rx";
+				};
+				ssiu01: ssiu-1 {
+					dmas = <&dmac0 0x6c>, <&dmac0 0x6d>;
+					dma-names = "tx", "rx";
+				};
+				ssiu02: ssiu-2 {
+					dmas = <&dmac0 0x6a>, <&dmac0 0x6b>;
+					dma-names = "tx", "rx";
+				};
+				ssiu03: ssiu-3 {
+					dmas = <&dmac0 0x68>, <&dmac0 0x69>;
+					dma-names = "tx", "rx";
+				};
+				ssiu04: ssiu-4 {
+					dmas = <&dmac0 0x66>, <&dmac0 0x67>;
+					dma-names = "tx", "rx";
+				};
+				ssiu05: ssiu-5 {
+					dmas = <&dmac0 0x64>, <&dmac0 0x65>;
+					dma-names = "tx", "rx";
+				};
+				ssiu06: ssiu-6 {
+					dmas = <&dmac0 0x62>, <&dmac0 0x63>;
+					dma-names = "tx", "rx";
+				};
+				ssiu07: ssiu-7 {
+					dmas = <&dmac0 0x60>, <&dmac0 0x61>;
+					dma-names = "tx", "rx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		ipmmu_rt0: iommu@ee480000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee480000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt1: iommu@ee4c0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xee4c0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds0: iommu@eed00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@eed40000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@eed80000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeed80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc: iommu@eedc0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeedc0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_3dg: iommu@eee00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@eee80000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeee80000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@eeec0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeeec0000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: iommu@eef00000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef00000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: iommu@eef40000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeef40000 0 0x20000>;
+			renesas,ipmmu-main = <&ipmmu_mm>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@eefc0000 {
+			compatible = "renesas,ipmmu-r8a779g0",
+				     "renesas,rcar-gen4-ipmmu-vmsa";
+			reg = <0 0xeefc0000 0 0x20000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		mmc0: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a779g0",
+				     "renesas,rcar-gen4-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 706>,
+				 <&cpg CPG_CORE R8A779G0_CLK_SD0H>;
+			clock-names = "core", "clkh";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 706>;
+			max-frequency = <200000000>;
+			iommus = <&ipmmu_ds0 32>;
+			status = "disabled";
+		};
+
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a779g0-rpc-if",
+				     "renesas,rcar-gen4-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x04000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 629>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 629>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1000000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x110000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		csi40: csi2@fe500000 {
+			compatible = "renesas,r8a779g0-csi2";
+			reg = <0 0xfe500000 0 0x40000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi40isp0: endpoint {
+						remote-endpoint = <&isp0csi40>;
+					};
+				};
+			};
+		};
+
+		csi41: csi2@fe540000 {
+			compatible = "renesas,r8a779g0-csi2";
+			reg = <0 0xfe540000 0 0x40000>;
+			interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 400>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 400>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+					csi41isp1: endpoint {
+						remote-endpoint = <&isp1csi41>;
+					};
+				};
+			};
+		};
+
+		fcpvd0: fcp@fea10000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea10000 0 0x200>;
+			clocks = <&cpg CPG_MOD 508>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 508>;
+		};
+
+		fcpvd1: fcp@fea11000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea11000 0 0x200>;
+			clocks = <&cpg CPG_MOD 509>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 509>;
+		};
+
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x7000>;
+			interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 830>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 830>;
+
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		vspd1: vsp@fea28000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea28000 0 0x7000>;
+			interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 831>;
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 831>;
+
+			renesas,fcp = <&fcpvd1>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779g0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+						remote-endpoint = <&dsi0_in>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_dsi1: endpoint {
+						remote-endpoint = <&dsi1_in>;
+					};
+				};
+			};
+		};
+
+		isp0: isp@fed00000 {
+			compatible = "renesas,r8a779g0-isp";
+			reg = <0 0xfed00000 0 0x10000>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 612>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP0>;
+			resets = <&cpg 612>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp0csi40: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi40isp0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp0vin00: endpoint {
+						remote-endpoint = <&vin00isp0>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp0vin01: endpoint {
+						remote-endpoint = <&vin01isp0>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp0vin02: endpoint {
+						remote-endpoint = <&vin02isp0>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp0vin03: endpoint {
+						remote-endpoint = <&vin03isp0>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp0vin04: endpoint {
+						remote-endpoint = <&vin04isp0>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp0vin05: endpoint {
+						remote-endpoint = <&vin05isp0>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp0vin06: endpoint {
+						remote-endpoint = <&vin06isp0>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp0vin07: endpoint {
+						remote-endpoint = <&vin07isp0>;
+					};
+				};
+			};
+		};
+
+		isp1: isp@fed20000 {
+			compatible = "renesas,r8a779g0-isp";
+			reg = <0 0xfed20000 0 0x10000>;
+			interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&cpg CPG_MOD 613>;
+			power-domains = <&sysc R8A779G0_PD_A3ISP1>;
+			resets = <&cpg 613>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+
+					isp1csi41: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&csi41isp1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					isp1vin08: endpoint {
+						remote-endpoint = <&vin08isp1>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					isp1vin09: endpoint {
+						remote-endpoint = <&vin09isp1>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					isp1vin10: endpoint {
+						remote-endpoint = <&vin10isp1>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					isp1vin11: endpoint {
+						remote-endpoint = <&vin11isp1>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					isp1vin12: endpoint {
+						remote-endpoint = <&vin12isp1>;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					isp1vin13: endpoint {
+						remote-endpoint = <&vin13isp1>;
+					};
+				};
+
+				port@7 {
+					reg = <7>;
+					isp1vin14: endpoint {
+						remote-endpoint = <&vin14isp1>;
+					};
+				};
+
+				port@8 {
+					reg = <8>;
+					isp1vin15: endpoint {
+						remote-endpoint = <&vin15isp1>;
+					};
+				};
+			};
+		};
+
+		dsi0: dsi-encoder@fed80000 {
+			compatible = "renesas,r8a779g0-dsi-csi2-tx";
+			reg = <0 0xfed80000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 415>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+			clock-names = "fck", "dsi", "pll";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 415>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi0_in: endpoint {
+						remote-endpoint = <&du_out_dsi0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		dsi1: dsi-encoder@fed90000 {
+			compatible = "renesas,r8a779g0-dsi-csi2-tx";
+			reg = <0 0xfed90000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 416>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+				 <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+			clock-names = "fck", "dsi", "pll";
+			power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+			resets = <&cpg 416>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi1_in: endpoint {
+						remote-endpoint = <&du_out_dsi1>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal_cr52: sensor1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_cnn: sensor2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ca76: sensor3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+
+			trips {
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal_ddr1: sensor4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 3>;
+
+			trips {
+				sensor4_crit: sensor4-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m0.dtsi b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi
new file mode 100644
index 000000000..38978360e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3e (R8A779M0) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m0", "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
new file mode 100644
index 000000000..74b0ac04f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-salvator-xs.dts
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m1";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m1",
+		     "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
new file mode 100644
index 000000000..d2089e1d7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m1-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a779m1";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a779m1", "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
new file mode 100644
index 000000000..705ea047e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb.dts
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m1.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a779m1";
+	compatible = "renesas,h3ulcb", "renesas,r8a779m1", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m1.dtsi b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
new file mode 100644
index 000000000..be0219def
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m1.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3e-2G (R8A779M1) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m1", "renesas,r8a7795";
+};
+
+&cluster0_opp {
+	opp-1700000000 {
+		/delete-property/ turbo-mode;
+	};
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m2.dtsi b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi
new file mode 100644
index 000000000..bced12764
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3e (R8A779M2) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m2", "renesas,r8a77961";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
new file mode 100644
index 000000000..e53a6e88c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-salvator-xs.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m3";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m3",
+		     "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
new file mode 100644
index 000000000..587e8764b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb-kf.dts
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a779m3-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a779m3";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a779m3", "renesas,r8a77961";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
new file mode 100644
index 000000000..413f000b4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb.dts
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m3.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a779m3";
+	compatible = "renesas,m3ulcb", "renesas,r8a779m3", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m3.dtsi b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
new file mode 100644
index 000000000..ffde14113
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m3.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3e-2G (R8A779M3) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m3", "renesas,r8a77961";
+};
+
+&cluster0_opp {
+	opp-1800000000 {
+		/delete-property/ turbo-mode;
+	};
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m4.dtsi b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi
new file mode 100644
index 000000000..ae8486056
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3Ne (R8A779M4) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77965.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m4", "renesas,r8a77965";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
new file mode 100644
index 000000000..6efc23171
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-salvator-xs.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m5.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m5";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m5",
+		     "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
new file mode 100644
index 000000000..aded03ad3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car M3Ne-2G (R8A779M5) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77965.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m5", "renesas,r8a77965";
+};
+
+&cluster0_opp {
+	opp-1800000000 {
+		/delete-property/ turbo-mode;
+	};
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m6.dtsi b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi
new file mode 100644
index 000000000..94d6a6cf5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car E3e (R8A779M6) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77990.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m6", "renesas,r8a77990";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m7.dtsi b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi
new file mode 100644
index 000000000..0580fa614
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car D3e (R8A779M7) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77995.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m7", "renesas,r8a77995";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi
new file mode 100644
index 000000000..dfccc080f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3Ne (R8A779M8) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m8", "renesas,r8a7795";
+};
+
+&cluster0_opp {
+	/delete-node/ opp-1600000000;
+	/delete-node/ opp-1700000000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779mb.dtsi b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi
new file mode 100644
index 000000000..181b737c9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779mb.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree Source for the R-Car H3Ne-1.7G (R8A779MB) SoC
+ *
+ * Copyright (C) 2022 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779mb", "renesas,r8a7795";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso
new file mode 100644
index 000000000..4edd103c7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043-smarc-pmod.dtso
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/{G2UL, Five} SMARC EVK PMOD parts
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ *
+ *
+ * [Connection]
+ *
+ * SMARC EVK
+ * +----------------------------+
+ * |CN7 (PMOD1 PIN HEADER)      |
+ * |	SCI0_TXD	  pin7  |
+ * |	SCI0_RXD	  pin8  |
+ * |	Gnd		  pin11 |
+ * |	Vcc		  pin12 |
+ * +----------------------------+
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	can0-stb-hog {
+		status = "disabled";
+	};
+
+	can1-stb-hog {
+		status = "disabled";
+	};
+
+	sci0_pins: sci0-pins {
+		pinmux = <RZG2L_PORT_PINMUX(2, 2, 5)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(2, 3, 5)>; /* RxD */
+	};
+};
+
+&sci0 {
+	pinctrl-0 = <&sci0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
new file mode 100644
index 000000000..8721f4c9f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/Five and RZ/G2UL SoCs
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r9a07g043-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g043";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mtu3: timer@10001200 {
+			compatible = "renesas,r9a07g043-mtu3",
+				     "renesas,rz-mtu3";
+			reg = <0 0x10001200 0 0xb00>;
+			interrupts = <SOC_PERIPHERAL_IRQ(170) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(171) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(172) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(173) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(174) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(175) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(176) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(177) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(178) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(179) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(180) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(181) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(182) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(183) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(184) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(185) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(186) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(187) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(188) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(189) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(190) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(191) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(192) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(193) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(194) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(195) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(196) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(197) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(198) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(199) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(200) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(201) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(202) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(203) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(204) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(205) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(206) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(207) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(208) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(209) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(210) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(211) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(212) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(213) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
+					  "tgia3", "tgib3", "tgic3", "tgid3",
+					  "tciv3",
+					  "tgia4", "tgib4", "tgic4", "tgid4",
+					  "tciv4",
+					  "tgiu5", "tgiv5", "tgiw5",
+					  "tgia6", "tgib6", "tgic6", "tgid6",
+					  "tciv6",
+					  "tgia7", "tgib7", "tgic7", "tgid7",
+					  "tciv7",
+					  "tgia8", "tgib8", "tgic8", "tgid8",
+					  "tciv8", "tciu8";
+			clocks = <&cpg CPG_MOD R9A07G043_MTU_X_MCK_MTU3>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_MTU_X_PRESET_MTU3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		ssi0: ssi@10049c00 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x10049c00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(326) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(327) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(328) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@1004a000 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(330) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(331) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(332) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@1004a400 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(334) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(337) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x265f>;
+			dma-names = "rt";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@1004a800 {
+			compatible = "renesas,r9a07g043-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(338) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(339) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(340) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G043_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(415) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(413) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(414) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
+			resets = <&cpg R9A07G043_RSPI0_RST>;
+			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(418) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(416) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(417) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
+			resets = <&cpg R9A07G043_RSPI1_RST>;
+			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(421) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(419) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(420) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
+			resets = <&cpg R9A07G043_RSPI2_RST>;
+			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(380) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(382) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(383) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(381) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(384) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(385) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(387) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(388) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(386) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(389) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(390) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(392) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(393) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(391) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(394) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(395) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(397) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(398) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(396) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(399) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g043",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(400) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(402) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(403) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(401) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(404) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g043-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(405) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(406) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(407) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(408) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g043-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(409) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(410) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(411) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(412) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
+			reg = <0 0x10050000 0 0x8000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(426) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(427) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(422) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(424) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(428) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(423) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(425) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(429) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx";
+			clocks = <&cpg CPG_MOD R9A07G043_CANFD_PCLK>,
+				 <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>;
+			assigned-clock-rates = <50000000>;
+			resets = <&cpg R9A07G043_CANFD_RSTP_N>,
+				 <&cpg R9A07G043_CANFD_RSTC_N>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(350) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(348) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(349) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(352) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(353) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(351) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(354) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(355) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C0_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058400 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(358) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(356) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(357) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(360) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(361) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(359) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(362) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(363) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C1_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10058800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058800 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(366) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(364) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(365) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(368) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(369) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(367) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(370) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(371) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C2_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+			reg = <0 0x10058c00 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(374) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(372) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(373) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(376) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(377) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(375) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(378) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(379) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G043_I2C3_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		adc: adc@10059000 {
+			compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
+			reg = <0 0x10059000 0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(347) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A07G043_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A07G043_ADC_PRESETN>,
+				 <&cpg R9A07G043_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+		};
+
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g043-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G043_TSU_PCLK>;
+			resets = <&cpg R9A07G043_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		sbc: spi@10060000 {
+			compatible = "renesas,r9a07g043-rpc-if",
+				     "renesas,rzg2l-rpc-if";
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			reg-names = "regs", "dirmap", "wbuf";
+			clocks = <&cpg CPG_MOD R9A07G043_SPI_CLK2>,
+				 <&cpg CPG_MOD R9A07G043_SPI_CLK>;
+			resets = <&cpg R9A07G043_SPI_RST>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g043-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g043-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g043-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 152>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_GPIO_RSTN>,
+				 <&cpg R9A07G043_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G043_GPIO_SPARE_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g043-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(141) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(125) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(126) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(127) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(128) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(129) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(130) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(131) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(132) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(133) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(134) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(135) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(136) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(137) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(138) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(139) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(140) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G043_DMAC_PCLK>;
+			clock-names = "main", "register";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G043_DMAC_ARESETN>,
+				 <&cpg R9A07G043_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		sdhi0: mmc@11c00000 {
+			compatible = "renesas,sdhi-r9a07g043",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(104) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(105) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G043_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a07g043",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(106) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(107) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G043_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G043_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g043-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(85) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(86) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G043_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G043_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G043_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g043-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(87) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(88) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(89) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G043_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G043_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G043_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g043-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>;
+			resets = <&cpg R9A07G043_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(91) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G043_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(96) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G043_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(92) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G043_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <SOC_PERIPHERAL_IRQ(97) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G043_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g043",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <SOC_PERIPHERAL_IRQ(94) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g043",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <SOC_PERIPHERAL_IRQ(99) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g043",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(100) IRQ_TYPE_EDGE_RISING>,
+				     <SOC_PERIPHERAL_IRQ(101) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(102) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(103) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G043_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g043-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G043_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <SOC_PERIPHERAL_IRQ(49) IRQ_TYPE_LEVEL_HIGH>,
+				     <SOC_PERIPHERAL_IRQ(50) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G043_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g043-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
+			resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g043-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
+			resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g043-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(48) IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
+			resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
new file mode 100644
index 000000000..2ab231572
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI nr
+
+#include "r9a07g043.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	interrupt-parent = <&irqc>;
+};
+
+&soc {
+	interrupt-parent = <&gic>;
+
+	irqc: interrupt-controller@110a0000 {
+		compatible = "renesas,r9a07g043u-irqc",
+			     "renesas,rzg2l-irqc";
+		reg = <0 0x110a0000 0 0x10000>;
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		interrupt-controller;
+		interrupts = <SOC_PERIPHERAL_IRQ(0) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(4) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(5) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(6) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(7) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(8) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(444) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(445) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(446) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(447) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(448) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(449) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(450) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(451) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(452) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(453) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(454) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(455) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(456) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(457) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(458) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(459) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(460) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(461) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(462) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(463) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(464) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(465) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(466) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(467) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(468) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(469) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(470) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(471) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(472) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(473) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(474) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(475) IRQ_TYPE_LEVEL_HIGH>,
+			     <SOC_PERIPHERAL_IRQ(25) IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "nmi",
+				  "irq0", "irq1", "irq2", "irq3",
+				  "irq4", "irq5", "irq6", "irq7",
+				  "tint0", "tint1", "tint2", "tint3",
+				  "tint4", "tint5", "tint6", "tint7",
+				  "tint8", "tint9", "tint10", "tint11",
+				  "tint12", "tint13", "tint14", "tint15",
+				  "tint16", "tint17", "tint18", "tint19",
+				  "tint20", "tint21", "tint22", "tint23",
+				  "tint24", "tint25", "tint26", "tint27",
+				  "tint28", "tint29", "tint30", "tint31",
+				  "bus-err";
+		clocks = <&cpg CPG_MOD R9A07G043_IA55_CLK>,
+			<&cpg CPG_MOD R9A07G043_IA55_PCLK>;
+		clock-names = "clk", "pclk";
+		power-domains = <&cpg>;
+		resets = <&cpg R9A07G043_IA55_RESETN>;
+	};
+
+	gic: interrupt-controller@11900000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x11900000 0 0x40000>,
+		      <0x0 0x11940000 0 0x60000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&sysc {
+	interrupts = <SOC_PERIPHERAL_IRQ(42) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(43) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>,
+		     <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "lpm_int", "ca55stbydone_int",
+			  "cm33stbyr_int", "ca55_deny";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
new file mode 100644
index 000000000..8e0107df2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N		(0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting on the SoM
+ */
+#define SW_SW0_DEV_SEL	1
+#define SW_ET0_EN_N	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ *  - Set DIP-Switch SW1-3 to On position.
+ *  - Set PMOD_MTU3 macro to 1.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && !SW_ET0_EN_N)
+#error "Cannot set as both PMOD_MTU3 and !SW_ET0_EN_N are mutually exclusive"
+#endif
+
+#include "r9a07g043u.dtsi"
+#include "rzg2ul-smarc-som.dtsi"
+#include "rzg2ul-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g043u11";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
new file mode 100644
index 000000000..66f68fc2b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -0,0 +1,1273 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L and RZ/G2LC common SoC parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g044-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g044";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G044_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-62500000 {
+			opp-hz = /bits/ 64 <62500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mtu3: timer@10001200 {
+			compatible = "renesas,r9a07g044-mtu3",
+				     "renesas,rz-mtu3";
+			reg = <0 0x10001200 0 0xb00>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
+					  "tgia3", "tgib3", "tgic3", "tgid3",
+					  "tciv3",
+					  "tgia4", "tgib4", "tgic4", "tgid4",
+					  "tciv4",
+					  "tgiu5", "tgiv5", "tgiw5",
+					  "tgia6", "tgib6", "tgic6", "tgid6",
+					  "tciv6",
+					  "tgia7", "tgib7", "tgic7", "tgid7",
+					  "tciv7",
+					  "tgia8", "tgib8", "tgic8", "tgid8",
+					  "tciv8", "tciu8";
+			clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		ssi0: ssi@10049c00 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x10049c00 0 0x400>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@1004a000 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a000 0 0x400>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@1004a400 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a400 0 0x400>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x265f>;
+			dma-names = "rt";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@1004a800 {
+			compatible = "renesas,r9a07g044-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a800 0 0x400>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G044_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI0_CLKB>;
+			resets = <&cpg R9A07G044_RSPI0_RST>;
+			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI1_CLKB>;
+			resets = <&cpg R9A07G044_RSPI1_RST>;
+			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g044-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G044_RSPI2_CLKB>;
+			resets = <&cpg R9A07G044_RSPI2_RST>;
+			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g044-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g044-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G044_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			compatible = "renesas,r9a07g044-canfd", "renesas,rzg2l-canfd";
+			reg = <0 0x10050000 0 0x8000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx";
+			clocks = <&cpg CPG_MOD R9A07G044_CANFD_PCLK>,
+				 <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R9A07G044_CLK_P0_DIV2>;
+			assigned-clock-rates = <50000000>;
+			resets = <&cpg R9A07G044_CANFD_RSTP_N>,
+				 <&cpg R9A07G044_CANFD_RSTC_N>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058000 0 0x400>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C0_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058400 0 0x400>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C1_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10058800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058800 0 0x400>;
+			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C2_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g044", "renesas,riic-rz";
+			reg = <0 0x10058c00 0 0x400>;
+			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G044_I2C3_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		adc: adc@10059000 {
+			compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
+			reg = <0 0x10059000 0 0x400>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A07G044_ADC_PRESETN>,
+				 <&cpg R9A07G044_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+			channel@2 {
+				reg = <2>;
+			};
+			channel@3 {
+				reg = <3>;
+			};
+			channel@4 {
+				reg = <4>;
+			};
+			channel@5 {
+				reg = <5>;
+			};
+			channel@6 {
+				reg = <6>;
+			};
+			channel@7 {
+				reg = <7>;
+			};
+		};
+
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g044-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+			resets = <&cpg R9A07G044_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		sbc: spi@10060000 {
+			compatible = "renesas,r9a07g044-rpc-if",
+				     "renesas,rzg2l-rpc-if";
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_SPI_CLK2>,
+				 <&cpg CPG_MOD R9A07G044_SPI_CLK>;
+			resets = <&cpg R9A07G044_SPI_RST>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cru: video@10830000 {
+			compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+			reg = <0 0x10830000 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+			clock-names = "video", "apb", "axi";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+			resets = <&cpg R9A07G044_CRU_PRESETN>,
+				 <&cpg R9A07G044_CRU_ARESETN>;
+			reset-names = "presetn", "aresetn";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+					cruparallel: endpoint@0 {
+						reg = <0>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+					crucsi2: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi2cru>;
+					};
+				};
+			};
+		};
+
+		csi2: csi2@10830400 {
+			compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+			reg = <0 0x10830400 0 0xfc00>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+			clock-names = "system", "video", "apb";
+			resets = <&cpg R9A07G044_CRU_PRESETN>,
+				 <&cpg R9A07G044_CRU_CMN_RSTB>;
+			reset-names = "presetn", "cmn-rstb";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					csi2cru: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&crucsi2>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@10850000 {
+			compatible = "renesas,r9a07g044-mipi-dsi",
+				     "renesas,rzg2l-mipi-dsi";
+			reg = <0 0x10850000 0 0x20000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "seq0", "seq1", "vin1", "rcv",
+					  "ferr", "ppi", "debug";
+			clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+				 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+			clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+			resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+				 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+				 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+			reset-names = "rst", "arst", "prst";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		vspd: vsp@10870000 {
+			compatible = "renesas,r9a07g044-vsp2";
+			reg = <0 0x10870000 0 0x10000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_LCDC_RESET_N>;
+			renesas,fcp = <&fcpvd>;
+		};
+
+		fcpvd: fcp@10880000 {
+			compatible = "renesas,r9a07g044-fcpvd",
+				     "renesas,fcpv";
+			reg = <0 0x10880000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_LCDC_RESET_N>;
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g044-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g044-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g044-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
+			interrupt-controller;
+			gpio-ranges = <&pinctrl 0 0 392>;
+			clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_GPIO_RSTN>,
+				 <&cpg R9A07G044_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+		};
+
+		irqc: interrupt-controller@110a0000 {
+			compatible = "renesas,r9a07g044-irqc",
+				     "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x110a0000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+				 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_IA55_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g044-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+			clock-names = "main", "register";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_DMAC_ARESETN>,
+				 <&cpg R9A07G044_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		gpu: gpu@11840000 {
+			compatible = "renesas,r9a07g044-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD R9A07G044_GPU_CLK>,
+				 <&cpg CPG_MOD R9A07G044_GPU_AXI_CLK>,
+				 <&cpg CPG_MOD R9A07G044_GPU_ACE_CLK>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G044_GPU_RESETN>,
+				 <&cpg R9A07G044_GPU_AXI_RESETN>,
+				 <&cpg R9A07G044_GPU_ACE_RESETN>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@11c00000 {
+			compatible = "renesas,sdhi-r9a07g044",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G044_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a07g044",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G044_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G044_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g044-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G044_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G044_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G044_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G044_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g044-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G044_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G044_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G044_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G044_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g044-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
+			resets = <&cpg R9A07G044_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G044_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g044",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g044",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G044_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@12800c00 {
+			compatible = "renesas,r9a07g044-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800C00 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G044_WDT1_PCLK>,
+				 <&cpg CPG_MOD R9A07G044_WDT1_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G044_WDT1_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM0_PCLK>;
+			resets = <&cpg R9A07G044_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM1_PCLK>;
+			resets = <&cpg R9A07G044_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g044-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G044_OSTM2_PCLK>;
+			resets = <&cpg R9A07G044_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
new file mode 100644
index 000000000..56a979e82
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 000000000..f983bdd3e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/G2LC SMARC EVK with
+ * OV5645 camera connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
new file mode 100644
index 000000000..0b90367b6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SD0_DEV_SEL	1
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN && SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ *  - Set DIP-Switch SW1-4 to Off position.
+ *  - Set SW_RSPI_CAN macro to 0.
+ *  - Set PMOD_MTU3 macro to 1.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && SW_RSPI_CAN)
+#error "Cannot set as both PMOD_MTU3 and SW_RSPI_CAN are mutually exclusive"
+#endif
+
+#include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc-som.dtsi"
+#include "rzg2lc-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044c2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
new file mode 100644
index 000000000..7bb8917fe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
new file mode 100644
index 000000000..9cf27ca9f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l1.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044l1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso
new file mode 100644
index 000000000..736c1e688
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree overlay for the RZ/{G2L, V2L} SMARC EVK with OV5645 camera
+ * connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#define OV5645_PARENT_I2C i2c0
+#include "rz-smarc-cru-csi-ov5645.dtsi"
+
+&ov5645 {
+	enable-gpios = <&pinctrl RZG2L_GPIO(2, 0) GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&pinctrl RZG2L_GPIO(40, 2) GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
new file mode 100644
index 000000000..568d49cfe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/* Enable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ * Disable PMOD1_SER0 by setting "#define PMOD1_SER0	0" above and
+ * enable PMOD_MTU3 by setting "#define PMOD_MTU3	1" below.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && PMOD1_SER0)
+#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive "
+#endif
+
+#define MTU3_COUNTER_Z_PHASE_SIGNAL	0
+
+#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL)
+#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
+#endif
+
+#include "r9a07g044l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
new file mode 100644
index 000000000..91dc10b2c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L R9A07G044L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044l2", "renesas,r9a07g044";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
new file mode 100644
index 000000000..1f1d481dc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -0,0 +1,1280 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g054-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g054";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio1-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio2-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+			cache-level = <3>;
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-62500000 {
+			opp-hz = /bits/ 64 <62500000>;
+			opp-microvolt = <1100000>;
+		};
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <1100000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		mtu3: timer@10001200 {
+			compatible = "renesas,r9a07g054-mtu3",
+				     "renesas,rz-mtu3";
+			reg = <0 0x10001200 0 0xb00>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
+					  "tgia3", "tgib3", "tgic3", "tgid3",
+					  "tciv3",
+					  "tgia4", "tgib4", "tgic4", "tgid4",
+					  "tciv4",
+					  "tgiu5", "tgiv5", "tgiw5",
+					  "tgia6", "tgib6", "tgic6", "tgid6",
+					  "tciv6",
+					  "tgia7", "tgib7", "tgic7", "tgid7",
+					  "tciv7",
+					  "tgia8", "tgib8", "tgic8", "tgid8",
+					  "tciv8", "tciu8";
+			clocks = <&cpg CPG_MOD R9A07G054_MTU_X_MCK_MTU3>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_MTU_X_PRESET_MTU3>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		ssi0: ssi@10049c00 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x10049c00 0 0x400>;
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI0_RST_M2_REG>;
+			dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi1: ssi@1004a000 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a000 0 0x400>;
+			interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI1_RST_M2_REG>;
+			dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi2: ssi@1004a400 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a400 0 0x400>;
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rt";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI2_RST_M2_REG>;
+			dmas = <&dmac 0x265f>;
+			dma-names = "rt";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		ssi3: ssi@1004a800 {
+			compatible = "renesas,r9a07g054-ssi",
+				     "renesas,rz-ssi";
+			reg = <0 0x1004a800 0 0x400>;
+			interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "int_req", "dma_rx", "dma_tx";
+			clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>,
+				 <&audio_clk1>, <&audio_clk2>;
+			clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+			resets = <&cpg R9A07G054_SSI3_RST_M2_REG>;
+			dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@1004ac00 {
+			compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004ac00 0 0x400>;
+			interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>;
+			resets = <&cpg R9A07G054_RSPI0_RST>;
+			dmas = <&dmac 0x2e95>, <&dmac 0x2e96>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@1004b000 {
+			compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b000 0 0x400>;
+			interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>;
+			resets = <&cpg R9A07G054_RSPI1_RST>;
+			dmas = <&dmac 0x2e99>, <&dmac 0x2e9a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@1004b400 {
+			compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+			reg = <0 0x1004b400 0 0x400>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error", "rx", "tx";
+			clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>;
+			resets = <&cpg R9A07G054_RSPI2_RST>;
+			dmas = <&dmac 0x2e9d>, <&dmac 0x2e9e>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			compatible = "renesas,r9a07g054-canfd", "renesas,rzg2l-canfd";
+			reg = <0 0x10050000 0 0x8000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g_err", "g_recc",
+					  "ch0_err", "ch0_rec", "ch0_trx",
+					  "ch1_err", "ch1_rec", "ch1_trx";
+			clocks = <&cpg CPG_MOD R9A07G054_CANFD_PCLK>,
+				 <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>;
+			assigned-clock-rates = <50000000>;
+			resets = <&cpg R9A07G054_CANFD_RSTP_N>,
+				 <&cpg R9A07G054_CANFD_RSTC_N>;
+			reset-names = "rstp_n", "rstc_n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058000 0 0x400>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C0_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C0_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058400 0 0x400>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C1_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C1_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@10058800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058800 0 0x400>;
+			interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C2_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C2_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+			reg = <0 0x10058c00 0 0x400>;
+			interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tei", "ri", "ti", "spi", "sti",
+					  "naki", "ali", "tmoi";
+			clocks = <&cpg CPG_MOD R9A07G054_I2C3_PCLK>;
+			clock-frequency = <100000>;
+			resets = <&cpg R9A07G054_I2C3_MRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		adc: adc@10059000 {
+			compatible = "renesas,r9a07g054-adc", "renesas,rzg2l-adc";
+			reg = <0 0x10059000 0 0x400>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_ADC_ADCLK>,
+				 <&cpg CPG_MOD R9A07G054_ADC_PCLK>;
+			clock-names = "adclk", "pclk";
+			resets = <&cpg R9A07G054_ADC_PRESETN>,
+				 <&cpg R9A07G054_ADC_ADRST_N>;
+			reset-names = "presetn", "adrst-n";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				reg = <0>;
+			};
+			channel@1 {
+				reg = <1>;
+			};
+			channel@2 {
+				reg = <2>;
+			};
+			channel@3 {
+				reg = <3>;
+			};
+			channel@4 {
+				reg = <4>;
+			};
+			channel@5 {
+				reg = <5>;
+			};
+			channel@6 {
+				reg = <6>;
+			};
+			channel@7 {
+				reg = <7>;
+			};
+		};
+
+		tsu: thermal@10059400 {
+			compatible = "renesas,r9a07g054-tsu",
+				     "renesas,rzg2l-tsu";
+			reg = <0 0x10059400 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_TSU_PCLK>;
+			resets = <&cpg R9A07G054_TSU_PRESETN>;
+			power-domains = <&cpg>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		sbc: spi@10060000 {
+			compatible = "renesas,r9a07g054-rpc-if",
+				     "renesas,rzg2l-rpc-if";
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_SPI_CLK2>,
+				 <&cpg CPG_MOD R9A07G054_SPI_CLK>;
+			resets = <&cpg R9A07G054_SPI_RST>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cru: video@10830000 {
+			compatible = "renesas,r9a07g054-cru", "renesas,rzg2l-cru";
+			reg = <0 0x10830000 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_ACLK>;
+			clock-names = "video", "apb", "axi";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+			resets = <&cpg R9A07G054_CRU_PRESETN>,
+				 <&cpg R9A07G054_CRU_ARESETN>;
+			reset-names = "presetn", "aresetn";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <0>;
+					cruparallel: endpoint@0 {
+						reg = <0>;
+					};
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					reg = <1>;
+					crucsi2: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&csi2cru>;
+					};
+				};
+			};
+		};
+
+		csi2: csi2@10830400 {
+			compatible = "renesas,r9a07g054-csi2", "renesas,rzg2l-csi2";
+			reg = <0 0x10830400 0 0xfc00>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_CRU_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_VCLK>,
+				 <&cpg CPG_MOD R9A07G054_CRU_PCLK>;
+			clock-names = "system", "video", "apb";
+			resets = <&cpg R9A07G054_CRU_PRESETN>,
+				 <&cpg R9A07G054_CRU_CMN_RSTB>;
+			reset-names = "presetn", "cmn-rstb";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					csi2cru: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&crucsi2>;
+					};
+				};
+			};
+		};
+
+		dsi: dsi@10850000 {
+			compatible = "renesas,r9a07g054-mipi-dsi",
+				     "renesas,rzg2l-mipi-dsi";
+			reg = <0 0x10850000 0 0x20000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "seq0", "seq1", "vin1", "rcv",
+					  "ferr", "ppi", "debug";
+			clocks = <&cpg CPG_MOD R9A07G054_MIPI_DSI_PLLCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_SYSCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_ACLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_VCLK>,
+				 <&cpg CPG_MOD R9A07G054_MIPI_DSI_LPCLK>;
+			clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+			resets = <&cpg R9A07G054_MIPI_DSI_CMN_RSTB>,
+				 <&cpg R9A07G054_MIPI_DSI_ARESET_N>,
+				 <&cpg R9A07G054_MIPI_DSI_PRESET_N>;
+			reset-names = "rst", "arst", "prst";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		vspd: vsp@10870000 {
+			compatible = "renesas,r9a07g054-vsp2",
+				     "renesas,r9a07g044-vsp2";
+			reg = <0 0x10870000 0 0x10000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_LCDC_RESET_N>;
+			renesas,fcp = <&fcpvd>;
+		};
+
+		fcpvd: fcp@10880000 {
+			compatible = "renesas,r9a07g054-fcpvd",
+				     "renesas,fcpv";
+			reg = <0 0x10880000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G054_LCDC_CLK_A>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_P>,
+				 <&cpg CPG_MOD R9A07G054_LCDC_CLK_D>;
+			clock-names = "aclk", "pclk", "vclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_LCDC_RESET_N>;
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g054-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g054-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g054-pinctrl",
+				     "renesas,r9a07g044-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&irqc>;
+			interrupt-controller;
+			gpio-ranges = <&pinctrl 0 0 392>;
+			clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_GPIO_RSTN>,
+				 <&cpg R9A07G054_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G054_GPIO_SPARE_RESETN>;
+		};
+
+		irqc: interrupt-controller@110a0000 {
+			compatible = "renesas,r9a07g054-irqc",
+				     "renesas,rzg2l-irqc";
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0x110a0000 0 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_IA55_CLK>,
+				 <&cpg CPG_MOD R9A07G054_IA55_PCLK>;
+			clock-names = "clk", "pclk";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_IA55_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g054-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G054_DMAC_PCLK>;
+			clock-names = "main", "register";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_DMAC_ARESETN>,
+				 <&cpg R9A07G054_DMAC_RST_ASYNC>;
+			reset-names = "arst", "rst_async";
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		gpu: gpu@11840000 {
+			compatible = "renesas,r9a07g054-mali",
+				     "arm,mali-bifrost";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu", "event";
+			clocks = <&cpg CPG_MOD R9A07G054_GPU_CLK>,
+				 <&cpg CPG_MOD R9A07G054_GPU_AXI_CLK>,
+				 <&cpg CPG_MOD R9A07G054_GPU_ACE_CLK>;
+			clock-names = "gpu", "bus", "bus_ace";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_GPU_RESETN>,
+				 <&cpg R9A07G054_GPU_AXI_RESETN>,
+				 <&cpg R9A07G054_GPU_ACE_RESETN>;
+			reset-names = "rst", "axi_rst", "ace_rst";
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@11c00000 {
+			compatible = "renesas,sdhi-r9a07g054",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c00000 0 0x10000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK>,
+				 <&cpg CPG_MOD R9A07G054_SDHI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SDHI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G054_SDHI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@11c10000 {
+			compatible = "renesas,sdhi-r9a07g054",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x11c10000 0 0x10000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK>,
+				 <&cpg CPG_MOD R9A07G054_SDHI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A07G054_SDHI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A07G054_SDHI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			compatible = "renesas,r9a07g054-usbphy-ctrl",
+				     "renesas,rzg2l-usbphy-ctrl";
+			reg = <0 0x11c40000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>;
+			resets = <&cpg R9A07G054_USB_PRESETN>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		ohci0: usb@11c50000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c50000 0 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G054_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@11c70000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11c70000 0 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G054_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb@11c50100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c50100 0 0x100>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G054_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@11c70100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11c70100 0 0x100>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A07G054_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			compatible = "renesas,usb2-phy-r9a07g054",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c50200 0 0x700>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			compatible = "renesas,usb2-phy-r9a07g054",
+				     "renesas,rzg2l-usb2-phy";
+			reg = <0 0x11c70200 0 0x700>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@11c60000 {
+			compatible = "renesas,usbhs-r9a07g054",
+				     "renesas,rza2-usbhs";
+			reg = <0 0x11c60000 0 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A07G054_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@12800800 {
+			compatible = "renesas,r9a07g054-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800800 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G054_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@12800c00 {
+			compatible = "renesas,r9a07g054-wdt",
+				     "renesas,rzg2l-wdt";
+			reg = <0 0x12800C00 0 0x400>;
+			clocks = <&cpg CPG_MOD R9A07G054_WDT1_PCLK>,
+				 <&cpg CPG_MOD R9A07G054_WDT1_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "wdt", "perrout";
+			resets = <&cpg R9A07G054_WDT1_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm0: timer@12801000 {
+			compatible = "renesas,r9a07g054-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801000 0x0 0x400>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_OSTM0_PCLK>;
+			resets = <&cpg R9A07G054_OSTM0_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm1: timer@12801400 {
+			compatible = "renesas,r9a07g054-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801400 0x0 0x400>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_OSTM1_PCLK>;
+			resets = <&cpg R9A07G054_OSTM1_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ostm2: timer@12801800 {
+			compatible = "renesas,r9a07g054-ostm",
+				     "renesas,ostm";
+			reg = <0x0 0x12801800 0x0 0x400>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&cpg CPG_MOD R9A07G054_OSTM2_PCLK>;
+			resets = <&cpg R9A07G054_OSTM2_PRESETZ>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsu 0>;
+			sustainable-power = <717>;
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 0 2>;
+					contribution = <1024>;
+				};
+			};
+
+			trips {
+				sensor_crit: sensor-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				target: trip-point {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
new file mode 100644
index 000000000..d85a6ac0f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l1", "renesas,r9a07g054";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso
new file mode 120000
index 000000000..0f175341d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc-cru-csi-ov5645.dtso
@@ -0,0 +1 @@
+r9a07g044l2-smarc-cru-csi-ov5645.dtso
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
new file mode 100644
index 000000000..b3e601688
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+/* Enable SCIF2 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/*
+ * To enable MTU3a PWM on PMOD0,
+ * Disable PMOD1_SER0 by setting "#define PMOD1_SER0	0" above and
+ * enable PMOD_MTU3 by setting "#define PMOD_MTU3	1" below.
+ */
+#define PMOD_MTU3	0
+
+#if (PMOD_MTU3 && PMOD1_SER0)
+#error "Cannot set as PMOD_MTU3 and PMOD1_SER0 are mutually exclusive "
+#endif
+
+#define MTU3_COUNTER_Z_PHASE_SIGNAL	0
+#if (!PMOD_MTU3 && MTU3_COUNTER_Z_PHASE_SIGNAL)
+#error "Cannot set 1 to MTU3_COUNTER_Z_PHASE_SIGNAL as PMOD_MTU3=0"
+#endif
+
+#include "r9a07g054l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g054l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
new file mode 100644
index 000000000..4d5914bc9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
new file mode 100644
index 000000000..39fe3f949
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2M (r9a09g011) Evaluation Kit Board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g011.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+
+/ {
+	model = "RZ/V2M Evaluation Kit 2.0";
+	compatible = "renesas,rzv2mevk2", "renesas,r9a09g011";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	memory@58000000 {
+		device_type = "memory";
+		/*
+		 * first 1.25GiB is reserved for ISP Firmware,
+		 * next 128MiB is reserved for secure area.
+		 */
+		reg = <0x0 0x58000000 0x0 0x28000000>;
+	};
+
+	memory@180000000 {
+		device_type = "memory";
+		reg = <0x1 0x80000000 0x0 0x80000000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&pwc 0 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 0>, <1800000 1>;
+	};
+};
+
+&avb {
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	phy-mode = "gmii";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&emmc {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	max-frequency = <200000000>;
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&pinctrl {
+	emmc_pins: emmc {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(0, 0, 2)>, /* MMDAT0 */
+				 <RZV2M_PORT_PINMUX(0, 1, 2)>, /* MMDAT1 */
+				 <RZV2M_PORT_PINMUX(0, 2, 2)>, /* MMDAT2 */
+				 <RZV2M_PORT_PINMUX(0, 3, 2)>, /* MMDAT3 */
+				 <RZV2M_PORT_PINMUX(0, 4, 2)>, /* MMDAT4 */
+				 <RZV2M_PORT_PINMUX(0, 5, 2)>, /* MMDAT5 */
+				 <RZV2M_PORT_PINMUX(0, 6, 2)>, /* MMDAT6 */
+				 <RZV2M_PORT_PINMUX(0, 7, 2)>; /* MMDAT7 */
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(0, 10, 2)>, /* MMCMD */
+				 <RZV2M_PORT_PINMUX(0, 11, 2)>; /* MMCLK */
+			power-source = <1800>;
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pinmux = <RZV2M_PORT_PINMUX(5, 0, 2)>, /* SDA */
+			 <RZV2M_PORT_PINMUX(5, 1, 2)>; /* SCL */
+	};
+
+	i2c2_pins: i2c2 {
+		pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+			 <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+	};
+
+	sdhi0_pins: sd0 {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <3300>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <3300>;
+		};
+
+		cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <3300>;
+		};
+	};
+
+	sdhi0_pins_uhs: sd0-uhs {
+		data {
+			pinmux = <RZV2M_PORT_PINMUX(8, 2, 1)>, /* SD0DAT0 */
+				 <RZV2M_PORT_PINMUX(8, 3, 1)>, /* SD0DAT1 */
+				 <RZV2M_PORT_PINMUX(8, 4, 1)>, /* SD0DAT2 */
+				 <RZV2M_PORT_PINMUX(8, 5, 1)>; /* SD0DAT3 */
+			power-source = <1800>;
+		};
+
+		ctrl {
+			pinmux = <RZV2M_PORT_PINMUX(8, 0, 1)>, /* SD0CMD */
+				 <RZV2M_PORT_PINMUX(8, 1, 1)>; /* SD0CLK */
+			power-source = <1800>;
+		};
+
+		cd {
+			pinmux = <RZV2M_PORT_PINMUX(8, 7, 1)>; /* SD0CD */
+			power-source = <1800>;
+		};
+	};
+
+	uart0_pins: uart0 {
+		pinmux = <RZV2M_PORT_PINMUX(3, 0, 2)>, /* UATX0 */
+			 <RZV2M_PORT_PINMUX(3, 1, 2)>, /* UARX0 */
+			 <RZV2M_PORT_PINMUX(3, 2, 2)>, /* UACTS0N */
+			 <RZV2M_PORT_PINMUX(3, 3, 2)>; /* UARTS0N */
+	};
+};
+
+&pwc {
+	renesas,rzv2m-pwc-power;
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usb3drd {
+	status = "okay";
+};
+
+&usb3host {
+	status = "okay";
+};
+
+&usb3peri {
+	companion = <&usb3host>;
+	status = "okay";
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&wdt0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
new file mode 100644
index 000000000..33f2ecf42
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2M SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a09g011-cpg.h>
+
+/ {
+	compatible = "renesas,r9a09g011";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA53>;
+			clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>;
+		};
+
+		L2_CA53: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@82010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x82010000 0 0x1000>,
+			      <0x0 0x82020000 0 0x20000>,
+			      <0x0 0x82040000 0 0x20000>,
+			      <0x0 0x82060000 0 0x20000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD R9A09G011_GIC_CLK>;
+			clock-names = "clk";
+		};
+
+		sdhi0: mmc@85000000 {
+			compatible = "renesas,sdhi-r9a09g011",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x85000000 0 0x2000>;
+			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_SDI0_IMCLK>,
+				 <&cpg CPG_MOD R9A09G011_SDI0_CLK_HS>,
+				 <&cpg CPG_MOD R9A09G011_SDI0_IMCLK2>,
+				 <&cpg CPG_MOD R9A09G011_SDI0_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A09G011_SDI0_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@85010000  {
+			compatible = "renesas,sdhi-r9a09g011",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x85010000 0 0x2000>;
+			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_SDI1_IMCLK>,
+				 <&cpg CPG_MOD R9A09G011_SDI1_CLK_HS>,
+				 <&cpg CPG_MOD R9A09G011_SDI1_IMCLK2>,
+				 <&cpg CPG_MOD R9A09G011_SDI1_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A09G011_SDI1_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		emmc: mmc@85020000  {
+			compatible = "renesas,sdhi-r9a09g011",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0x0 0x85020000 0 0x2000>;
+			interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_EMM_IMCLK>,
+				 <&cpg CPG_MOD R9A09G011_EMM_CLK_HS>,
+				 <&cpg CPG_MOD R9A09G011_EMM_IMCLK2>,
+				 <&cpg CPG_MOD R9A09G011_EMM_ACLK>;
+			clock-names = "core", "clkh", "cd", "aclk";
+			resets = <&cpg R9A09G011_EMM_IXRST>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb3drd: usb3drd@85070400 {
+			compatible = "renesas,r9a09g011-usb3drd",
+				     "renesas,rzv2m-usb3drd";
+			reg = <0x0 0x85070400 0x0 0x100>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				      <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "drd", "bc", "gpi";
+			clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+				 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+			clock-names = "axi", "reg";
+			resets = <&cpg R9A09G011_USB_DRD_RESET>;
+			power-domains = <&cpg>;
+			ranges;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			usb3host: usb@85060000 {
+				compatible = "renesas,r9a09g011-xhci",
+					     "renesas,rzv2m-xhci";
+				reg = <0 0x85060000 0 0x2000>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_H>,
+					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+				clock-names = "axi", "reg";
+				resets = <&cpg R9A09G011_USB_ARESETN_H>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+
+			usb3peri: usb3peri@85070000 {
+				compatible = "renesas,r9a09g011-usb3-peri",
+					     "renesas,rzv2m-usb3-peri";
+				reg = <0x0 0x85070000 0x0 0x400>;
+				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cpg CPG_MOD R9A09G011_USB_ACLK_P>,
+					 <&cpg CPG_MOD R9A09G011_USB_PCLK>;
+				clock-names = "axi", "reg";
+				resets = <&cpg R9A09G011_USB_ARESETN_P>;
+				power-domains = <&cpg>;
+				status = "disabled";
+			};
+		};
+
+		avb: ethernet@a3300000 {
+			compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m";
+			reg = <0 0xa3300000 0 0x800>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, /* ch18: Tx0 BE */
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>, /* ch19: Tx1 NC */
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* DiA */
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* DiB */
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, /* Line1_A */
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>, /* Line1_B */
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>, /* Line2_A */
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>, /* Line2_B */
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; /* Line3 MAC */
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "dia", "dib",
+					  "err_a", "err_b", "mgmt_a", "mgmt_b",
+					  "line3";
+			clocks = <&cpg CPG_MOD R9A09G011_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A09G011_ETH0_CLK_CHI>,
+				 <&cpg CPG_MOD R9A09G011_ETH0_GPTP_EXT>;
+			clock-names = "axi", "chi", "gptp";
+			resets = <&cpg R9A09G011_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@a3500000 {
+			compatible = "renesas,r9a09g011-cpg";
+			reg = <0 0xa3500000 0 0x1000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		pwc: pwc@a3700000 {
+			compatible = "renesas,r9a09g011-pwc", "renesas,rzv2m-pwc";
+			reg = <0 0xa3700000 0 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		sys: system-controller@a3f03000 {
+			compatible = "renesas,r9a09g011-sys";
+			reg = <0 0xa3f03000 0 0x400>;
+		};
+
+		csi0: spi@a4020000 {
+			compatible = "renesas,rzv2m-csi";
+			reg = <0 0xa4020000 0 0x80>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_CSI0_CLK>,
+				 <&cpg CPG_MOD R9A09G011_CPERI_GRPG_PCLK>;
+			clock-names = "csiclk", "pclk";
+			resets = <&cpg R9A09G011_CSI_GPG_PRESETN>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		csi4: spi@a4020200 {
+			compatible = "renesas,rzv2m-csi";
+			reg = <0 0xa4020200 0 0x80>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_CSI4_CLK>,
+				 <&cpg CPG_MOD R9A09G011_CPERI_GRPH_PCLK>;
+			clock-names = "csiclk", "pclk";
+			resets = <&cpg R9A09G011_CSI_GPH_PRESETN>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@a4030000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+			reg = <0 0xa4030000 0 0x80>;
+			interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tia", "tis";
+			clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+			resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@a4030100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+			reg = <0 0xa4030100 0 0x80>;
+			interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "tia", "tis";
+			clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK1>;
+			resets = <&cpg R9A09G011_IIC_GPB_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		uart0: serial@a4040000 {
+			compatible = "renesas,r9a09g011-uart", "renesas,em-uart";
+			reg = <0 0xa4040000 0 0x80>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_URT0_CLK>,
+				 <&cpg CPG_MOD R9A09G011_URT_PCLK>;
+			clock-names = "sclk", "pclk";
+			status = "disabled";
+		};
+
+		wdt0: watchdog@a4050000 {
+			compatible = "renesas,r9a09g011-wdt",
+				     "renesas,rzv2m-wdt";
+			reg = <0 0xa4050000 0 0x80>;
+			clocks = <&cpg CPG_MOD R9A09G011_WDT0_PCLK>,
+				 <&cpg CPG_MOD R9A09G011_WDT0_CLK>;
+			clock-names = "pclk", "oscclk";
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&cpg R9A09G011_WDT0_PRESETN>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@b6250000 {
+			compatible = "renesas,r9a09g011-pinctrl";
+			reg = <0 0xb6250000 0 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 352>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A09G011_PFC_PRESETN>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
new file mode 100644
index 000000000..a7594ba3a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer cset name='Left Input Mixer L2 Switch' on
+ *	amixer cset name='Right Input Mixer R2 Switch' on
+ *	amixer cset name='Headphone Playback Volume' 100
+ *	amixer cset name='PCM Volume' 100%
+ *	amixer cset name='Input PGA Volume' 25
+ *
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_mclock: audio_mclock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	snd_rzg2l: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets = "Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			    "L2", "Mic Bias",
+			    "R2", "Mic Bias",
+			    "Mic Bias", "Microphone Jack";
+
+		cpu_dai: simple-audio-card,cpu {
+		};
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_mclock>;
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	usb0_vbus_otg: regulator-usb0-vbus-otg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS_OTG";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&audio_clk1 {
+	clock-frequency = <11289600>;
+};
+
+&audio_clk2 {
+	clock-frequency = <12288000>;
+};
+
+&canfd {
+	pinctrl-0 = <&can0_pins &can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&phyrst {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&usb0_vbus_otg>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
new file mode 100644
index 000000000..c5bb63c63
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common Device Tree for the RZ/G2L SMARC EVK (and alike EVKs) with
+ * OV5645 camera connected to CSI and CRU enabled.
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+&{/} {
+	ov5645_vdddo_1v8: 1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdddo";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vdda_2v8: 2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vdda";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	ov5645_vddd_1v5: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "camera_vddd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	ov5645_fixed_clk: osc25250-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&cru {
+	status = "okay";
+};
+
+&csi2 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi2_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&OV5645_PARENT_I2C {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ov5645: camera@3c {
+		compatible = "ovti,ov5645";
+		reg = <0x3c>;
+		clocks = <&ov5645_fixed_clk>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&ov5645_vdddo_1v8>;
+		vdda-supply = <&ov5645_vdda_2v8>;
+		vddd-supply = <&ov5645_vddd_1v5>;
+
+		port {
+			ov5645_ep: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
new file mode 100644
index 000000000..bcc21178a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Advantech idk-1110wr LVDS panel connected
+ * to RZ/G2 boards
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	panel-lvds {
+		compatible = "advantech,idk-1110wr", "panel-lvds";
+
+		width-mm = <223>;
+		height-mm = <125>;
+
+		data-mapping = "jeida-24";
+
+		panel-timing {
+			/* 1024x600 @60Hz */
+			clock-frequency = <51200000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hsync-len = <240>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <15>;
+			vback-porch = <10>;
+			vsync-len = <10>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
new file mode 100644
index 000000000..18c526c7a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	can0_pins: can0 {
+		pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
+			 <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
+	};
+
+	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
+	can0-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can0_stb";
+	};
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
+			 <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
+	};
+
+	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	i2c3_pins: i2c3 {
+		pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
+	};
+
+	mtu3_pins: mtu3 {
+		mtu3-ext-clk-input-pin {
+			pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */
+				 <RZG2L_PORT_PINMUX(48, 1, 4)>; /* MTCLKB */
+		};
+
+		mtu3-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
+				 <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
+				 <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
+				 <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
+		};
+
+#if MTU3_COUNTER_Z_PHASE_SIGNAL
+		mtu3-zphase-clk {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */
+		};
+#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	scif2_pins: scif2 {
+		pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
new file mode 100644
index 000000000..547859c38
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */
+#define EMMC	1
+
+/*
+ * To enable uSD card on CN3,
+ * SW1[2] should be at position 3/ON.
+ * Disable eMMC by setting "#define EMMC	0" above.
+ */
+#define SDHI	(!EMMC)
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	/* 32.768kHz crystal */
+	x2: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&adc {
+	pinctrl-0 = <&adc_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/delete-node/ channel@6;
+	/delete-node/ channel@7;
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&i2c3 {
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+
+		clocks = <&x2>;
+		clock-names = "xin";
+	};
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	adc_pins: adc {
+		pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
+	};
+
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* IRQ2 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
+			 <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+			 <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+			 <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
+			 <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+			 <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+			 <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+			 <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+			 <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+			 <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+			 <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+			 <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+			 <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+			 <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+			 <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
+			 <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* IRQ3 */
+	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	qspi0_pins: qspi0 {
+		qspi0-data {
+			pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+			power-source = <1800>;
+		};
+
+		qspi0-ctrl {
+			pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+			power-source = <1800>;
+		};
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at position 2/OFF to enable 64 GB eMMC
+	 * SW1[2] should be at position 3/ON to enable uSD card CN3
+	 */
+	sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+		};
+	};
+};
+
+&sbc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x00000000 0x2000000>;
+				read-only;
+			};
+			user@2000000 {
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
+
+#if SDHI
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if EMMC
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
new file mode 100644
index 000000000..68eab8e26
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		serial1 = &scif2;
+		i2c3 = &i2c3;
+	};
+
+	osc1: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+&cpu_dai {
+	sound-dai = <&ssi0>;
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	adv7535: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(2, 1) IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&osc1>;
+		clock-names = "cec";
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		a2vdd-supply = <&reg_1p8v>;
+		v3p3-supply = <&reg_3p3v>;
+		v1p2-supply = <&reg_1p8v>;
+
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#if MTU3_COUNTER_Z_PHASE_SIGNAL
+/* SDHI cd pin is muxed with counter Z phase signal */
+&sdhi1 {
+	status = "disabled";
+};
+#endif /* MTU3_COUNTER_Z_PHASE_SIGNAL */
+
+&spi1 {
+	status = "disabled";
+};
+#endif /* PMOD_MTU3 */
+
+/*
+ * To enable SCIF2 (SER0) on PMOD1 (CN7)
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if PMOD1_SER0
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
+
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
new file mode 100644
index 000000000..92c64d583
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+#if SW_SCIF_CAN
+	/* SW8 should be at position 2->1 */
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 3)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 3)>; /* RxD */
+	};
+#endif
+
+#if SW_RSPI_CAN
+	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 3)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(44, 1, 3)>; /* RxD */
+	};
+#endif
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	i2c2_pins: i2c2 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 3, 1)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(42, 4, 1)>; /* SCL */
+	};
+
+	mtu3_pins: mtu3 {
+		mtu3-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
+				 <RZG2L_PORT_PINMUX(44, 1, 4)>, /* MTIOC3B */
+				 <RZG2L_PORT_PINMUX(44, 2, 4)>, /* MTIOC3C */
+				 <RZG2L_PORT_PINMUX(44, 3, 4)>; /* MTIOC3D */
+		};
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	scif1_pins: scif1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
new file mode 100644
index 000000000..56ff92453
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	/* 32.768kHz crystal */
+	x2: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ0 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&i2c2 {
+	raa215300: pmic@12 {
+		compatible = "renesas,raa215300";
+		reg = <0x12>, <0x6f>;
+		reg-names = "main", "rtc";
+
+		clocks = <&x2>;
+		clock-names = "xin";
+	};
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(0, 0, 1)>;  /* IRQ0 */
+	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	qspi0_pins: qspi0 {
+		qspi0-data {
+			pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+			power-source = <1800>;
+		};
+
+		qspi0-ctrl {
+			pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+			power-source = <1800>;
+		};
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at OFF position to enable 64 GB eMMC
+	 * SW1[2] should be at position ON to enable uSD card CN3
+	 */
+	gpio-sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(40, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+};
+
+&sbc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x00000000 0x2000000>;
+				read-only;
+			};
+			user@2000000 {
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
+
+#if (!SW_SD0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if SW_SD0_DEV_SEL
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
new file mode 100644
index 000000000..83fce96a2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+#include "rzg2lc-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+
+/ {
+	aliases {
+		serial1 = &scif1;
+		i2c2 = &i2c2;
+	};
+
+	osc1: cec-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+#if (SW_SCIF_CAN || SW_RSPI_CAN)
+&canfd {
+	pinctrl-0 = <&can1_pins>;
+	/delete-node/ channel@0;
+};
+#else
+&canfd {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&cpu_dai {
+	sound-dai = <&ssi0>;
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi0_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi0_out: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7535_in>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	adv7535: hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>;
+
+		interrupt-parent = <&pinctrl>;
+		interrupts = <RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&osc1>;
+		clock-names = "cec";
+		avdd-supply = <&reg_1p8v>;
+		dvdd-supply = <&reg_1p8v>;
+		pvdd-supply = <&reg_1p8v>;
+		a2vdd-supply = <&reg_1p8v>;
+		v3p3-supply = <&reg_3p3v>;
+		v1p2-supply = <&reg_1p8v>;
+
+		adi,dsi-lanes = <4>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7535_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&spi1 {
+	status = "disabled";
+};
+#endif
+
+/*
+ * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if (!SW_SCIF_CAN && PMOD1_SER0)
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
+
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#if (SW_RSPI_CAN)
+&spi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
new file mode 100644
index 000000000..355694fe4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SMARC pincontrol parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	can0_pins: can0 {
+		pinmux = <RZG2L_PORT_PINMUX(1, 1, 3)>, /* TX */
+			 <RZG2L_PORT_PINMUX(1, 2, 3)>; /* RX */
+	};
+
+#if (SW_ET0_EN_N)
+	can0-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can0_stb";
+	};
+#endif
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(2, 0, 3)>, /* TX */
+			 <RZG2L_PORT_PINMUX(2, 1, 3)>; /* RX */
+	};
+
+#if (SW_ET0_EN_N)
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+#endif
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	mtu3_pins: mtu3 {
+		mtu2-pwm {
+			pinmux = <RZG2L_PORT_PINMUX(4, 0, 4)>; /* MTIOC2A */
+		};
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(6, 4, 6)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 2)>, /* CK */
+			 <RZG2L_PORT_PINMUX(4, 1, 2)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(4, 2, 2)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(4, 3, 2)>; /* SSL */
+	};
+
+	ssi1_pins: ssi1 {
+		pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(3, 2, 2)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(3, 3, 2)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 2, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
new file mode 100644
index 000000000..97cdad2a1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SMARC SOM common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+#if !(SW_SW0_DEV_SEL)
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(6, 2) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+#endif
+};
+
+#if (SW_SW0_DEV_SEL)
+&adc {
+	pinctrl-0 = <&adc_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+#endif
+
+#if (!SW_ET0_EN_N)
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+#endif
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	adc_pins: adc {
+		pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */
+	};
+
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
+			 <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
+			 <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
+			 <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */
+			 <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
+			 <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
+			 <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
+			 <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
+			 <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
+			 <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
+			 <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
+			 <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
+			 <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
+			 <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
+			 <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
+			 <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+		};
+	};
+};
+
+#if (SW_SW0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#else
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
new file mode 100644
index 000000000..8eb411aac
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include "rzg2ul-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+
+#if (!SW_ET0_EN_N)
+&canfd {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&cpu_dai {
+	sound-dai = <&ssi1>;
+};
+
+&i2c1 {
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+#if PMOD_MTU3
+&mtu3 {
+	pinctrl-0 = <&mtu3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&spi1 {
+	status = "disabled";
+};
+#endif
+
+#if (SW_ET0_EN_N)
+&ssi1 {
+	pinctrl-0 = <&ssi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#else
+&snd_rzg2l {
+	status = "disabled";
+};
+
+&spi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ssi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+&vccq_sdhi1 {
+	gpios = <&pinctrl RZG2L_GPIO(6, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
new file mode 100644
index 000000000..4a3d50378
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -0,0 +1,1104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for common parts of Salvator-X board variants
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+		serial0 = &scif2;
+		serial1 = &hscif1;
+		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi3;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <256 128 64 16 8 4 0>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12v>;
+		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	cvbs-in {
+		compatible = "composite-video-connector";
+		label = "CVBS IN";
+
+		port {
+			cvbs_con: endpoint {
+				remote-endpoint = <&adv7482_ain7>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		label = "HDMI IN";
+		type = "a";
+
+		port {
+			hdmi_in_con: endpoint {
+				remote-endpoint = <&adv7482_hdmi>;
+			};
+		};
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		label = "HDMI0 OUT";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	hdmi1-out {
+		compatible = "hdmi-connector";
+		label = "HDMI1 OUT";
+		type = "a";
+
+		port {
+			hdmi1_con: endpoint {
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&keys_pins>;
+		pinctrl-names = "default";
+
+		key-1 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW4-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW4-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW4-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW4-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "TSW0";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "TSW1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "TSW2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "rcar-sound";
+
+		dais = <&rsnd_port0	/* ak4613 */
+			&rsnd_port1	/* HDMI0  */
+#ifdef SOC_HAS_HDMI1
+			&rsnd_port2	/* HDMI1  */
+#endif
+			>;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vcc_sdhi3: regulator-vcc-sdhi3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI3 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi3: regulator-vccq-sdhi3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI3 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	/* External DU dot clocks */
+	x21_clk: x21-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x22_clk: x22-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&a57_0 {
+	cpu-supply = <&dvfs>;
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&csi20 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi20_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1>;
+				remote-endpoint = <&adv7482_txb>;
+			};
+		};
+	};
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&adv7482_txa>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+#ifdef SOC_HAS_HDMI1
+&hdmi1 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi1_out: endpoint {
+				remote-endpoint = <&hdmi1_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi1_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint2>;
+			};
+		};
+	};
+};
+
+&hdmi1_con {
+	remote-endpoint = <&rcar_dw_hdmi1_out>;
+};
+#endif /* SOC_HAS_HDMI1 */
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	video-receiver@70 {
+		compatible = "adi,adv7482";
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
+
+		interrupt-parent = <&gpio6>;
+		interrupt-names = "intrq1", "intrq2";
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
+			     <31 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@7 {
+				reg = <7>;
+
+				adv7482_ain7: endpoint {
+					remote-endpoint = <&cvbs_con>;
+				};
+			};
+
+			port@8 {
+				reg = <8>;
+
+				adv7482_hdmi: endpoint {
+					remote-endpoint = <&hdmi_in_con>;
+				};
+			};
+
+			port@a {
+				reg = <10>;
+
+				adv7482_txa: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+
+			port@b {
+				reg = <11>;
+
+				adv7482_txb: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1>;
+					remote-endpoint = <&csi20_in>;
+				};
+			};
+		};
+	};
+
+	csa_vdd: adc@7c {
+		compatible = "maxim,max9611";
+		reg = <0x7c>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+
+	csa_dvfs: adc@7f {
+		compatible = "maxim,max9611";
+		reg = <0x7f>;
+
+		shunt-resistor-micro-ohms = <5000>;
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0xf>;
+		rohm,rstbmode-level;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
+		function = "du";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	keys_pins: keys {
+		pins = "GP_5_17", "GP_5_20", "GP_5_22";
+		bias-pull-up;
+	};
+
+	pwm1_pins: pwm1 {
+		groups = "pwm1_a";
+		function = "pwm1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_a", "scif1_ctrl";
+		function = "scif1";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sdhi3_pins_uhs: sd3_uhs {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+
+		pwen {
+			pins = "GP_6_26";
+			bias-pull-down;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+
+				dai-format = "left_j";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi0>, <&src0>, <&dvc0>;
+				capture = <&ssi1>, <&src1>, <&dvc1>;
+			};
+		};
+
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+
+#ifdef SOC_HAS_HDMI1
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_endpoint2: endpoint {
+				remote-endpoint = <&dw_hdmi1_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint2>;
+				frame-master = <&rsnd_endpoint2>;
+
+				playback = <&ssi3>;
+			};
+		};
+#endif /* SOC_HAS_HDMI1 */
+	};
+};
+
+&rpc {
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+#ifdef SOC_HAS_SATA
+&sata {
+	status = "okay";
+};
+#endif /* SOC_HAS_SATA */
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	/* status = "okay"; */
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi3>;
+	vqmmc-supply = <&vccq_sdhi3>;
+	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+#ifdef SOC_HAS_USB2_CH2
+&ehci2 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&pfc {
+	usb2_pins: usb2 {
+		groups = "usb2";
+		function = "usb2";
+	};
+};
+
+&usb2_phy2 {
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH2 */
diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso
new file mode 100644
index 000000000..c83a30adc
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree overlay for the AA104XD12 panel connected to LVDS0 on a
+ * Salvator-X or Salvator-XS board
+ *
+ * Copyright 2021 Ideas on Board Oy
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+#include "panel-aa104xd12.dtsi"
+};
+
+&{/panel} {
+	backlight = <&backlight>;
+
+	port {
+		panel_in: endpoint {
+			remote-endpoint = <&lvds0_out>;
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
new file mode 100644
index 000000000..ddee50e64
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015-2016 Renesas Electronics Corp.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+	model = "Renesas Salvator-X board";
+	compatible = "renesas,salvator-x";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
new file mode 100644
index 000000000..08b925624
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Salvator-X 2nd version board
+ *
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+#include "salvator-common.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board";
+	compatible = "renesas,salvator-xs";
+};
+
+&extal_clk {
+	clock-frequency = <16640000>;
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	versaclock6: clock-generator@6a {
+		compatible = "idt,5p49v6901";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
+
+#ifdef SOC_HAS_SATA
+&pca9654 {
+	pcie-sata-switch-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		output-low; /* enable SATA by default */
+		line-name = "PCIE/SATA switch";
+	};
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+#endif /* SOC_HAS_SATA */
+
+#ifdef SOC_HAS_USB2_CH3
+&ehci3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&hsusb3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci3 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pfc {
+	/*
+	 * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
+	 *   (when SW31 is the default setting on Salvator-XS).
+	 * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
+	 *   r8a77951 with Salvator-XS.
+	 *   Hence the SW31 setting must be changed like 2) below.
+	 *   1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
+	 *	- Connect GP6_3[01] to ADV7842.
+	 *   2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
+	 *	- Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
+	 *	- Connect GP6_{04,21} to ADV7842.
+	 */
+	usb2_ch3_pins: usb2_ch3 {
+		groups = "usb2_ch3";
+		function = "usb2_ch3";
+	};
+};
+
+&usb2_phy3 {
+	pinctrl-0 = <&usb2_ch3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+#endif /* SOC_HAS_USB2_CH3 */
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
new file mode 100644
index 000000000..672b0a224
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card-mix+split.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card (MIX)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <-----> (2ch) (X) ak4613	(MIX-0)
+ *	(B) CPU1 (2ch)  --/			(MIX-1)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		compatible = "audio-graph-scu-card";
+		label = "rcar-sound";
+
+		routing = "ak4613 Playback", "DAI0 Playback",
+			  "ak4613 Playback", "DAI1 Playback",
+			  "DAI0 Capture",    "ak4613 Capture";
+
+		dais = <&rsnd_port0 /* (A) CPU0 */
+			&rsnd_port1 /* (B) CPU1 */
+		>;
+	};
+};
+
+&ak4613 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (X) ak4613
+		 */
+		prefix = "ak4613";
+		convert-rate = <48000>;
+
+		/* (A) CPU0 <-> (X) ak4613 */
+		ak4613_ep1: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&rsnd_for_ak4613_1>;
+		};
+		/* (B) CPU1 -> (X) ak4613 */
+		ak4613_ep2: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&rsnd_for_ak4613_2>;
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (A) CPU0
+		 */
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_for_ak4613_1: endpoint {
+				remote-endpoint = <&ak4613_ep1>;
+				bitclock-master;
+				frame-master;
+				playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+				capture  = <&ssi1 &src0 &dvc1>;
+			};
+		};
+		/*
+		 * (B) CPU1
+		 */
+		rsnd_port1: port@1 {
+			reg = <1>;
+			rsnd_for_ak4613_2: endpoint {
+				remote-endpoint = <&ak4613_ep2>;
+				bitclock-master;
+				frame-master;
+				playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
new file mode 100644
index 000000000..3be54df64
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <-----> ak4613
+ *	(B) CPU1  -----> HDMI
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+
+		dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
+			&rsnd_port1 /* (B) CPU1  -> HDMI   */
+		>;
+	};
+};
+
+&ak4613 {
+	#sound-dai-cells = <0>;
+
+	port {
+		/*
+		 * (A) CPU0 <-> ak4613
+		 */
+		ak4613_endpoint: endpoint {
+			remote-endpoint = <&rsnd_for_ak4613>;
+		};
+	};
+};
+
+&hdmi0 {
+	ports {
+		port@2 {
+			/*
+			 * (B) CPU1 -> HDMI
+			 */
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_for_hdmi>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			/*
+			 * (A) CPU0 <-> ak4613
+			 */
+			reg = <0>;
+			rsnd_for_ak4613: endpoint {
+				remote-endpoint = <&ak4613_endpoint>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssi0>, <&src0>, <&dvc0>;
+				capture  = <&ssi1>, <&src1>, <&dvc1>;
+			};
+		};
+		rsnd_port1: port@1 {
+			/*
+			 * (B) CPU1 -> HDMI
+			 */
+			reg = <1>;
+			rsnd_for_hdmi: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
new file mode 100644
index 000000000..75b024e3f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2-mix+split.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card2 (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X) ak4613	(MIX-0)
+ *	(B) CPU1 (2ch)  --/			(MIX-1)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+/ {
+	sound_card: sound {
+		compatible = "audio-graph-card2";
+		label = "rcar-sound";
+
+		routing = "ak4613 Playback", "DAI0 Playback",
+			  "ak4613 Playback", "DAI1 Playback",
+			  "DAI0 Capture",    "ak4613 Capture";
+
+		/delete-property/ dais;
+		links = <&fe_a		/* (A) CPU0   */
+			 &fe_b		/* (B) CPU1   */
+			 &be_x		/* (X) ak4613 */
+		>;
+
+		dpcm {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				/*
+				 * FE
+				 * (A) CPU0 (MIX-0)
+				 * (B) CPU1 (MIX-1)
+				 */
+				fe_a: port@0 { reg = <0>; fe_a_ep: endpoint { remote-endpoint = <&rsnd_a_ep>; }; };
+				fe_b: port@1 { reg = <1>; fe_b_ep: endpoint { remote-endpoint = <&rsnd_b_ep>; }; };
+			};
+
+			ports@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+				/*
+				 * BE
+				 * (X) ak4613
+				 */
+				be_x: port@0 { reg = <0>; be_x_ep: endpoint { remote-endpoint = <&ak4613_x_ep>; }; };
+			};
+		};
+	};
+};
+
+&ak4613 {
+	port {
+		/*
+		 * (X) ak4613
+		 */
+		prefix = "ak4613";
+		convert-rate = <48000>;
+
+		ak4613_x_ep: endpoint {
+			remote-endpoint = <&be_x_ep>;
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (A) CPU0
+		 */
+		port@0 {
+			reg = <0>;
+			rsnd_a_ep: endpoint {
+				remote-endpoint = <&fe_a_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+				capture  = <&ssi1 &src0 &dvc1>;
+			};
+		};
+		/*
+		 * (B) CPU1
+		 */
+		port@1 {
+			reg = <1>;
+			rsnd_b_ep: endpoint {
+				remote-endpoint = <&fe_b_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
new file mode 100644
index 000000000..5ebec1235
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-audio-graph-card2.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Audio Graph Card2
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+#include "ulcb-audio-graph-card.dtsi"
+
+&sound_card {
+	compatible = "audio-graph-card2";
+
+	/delete-property/ dais;
+	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
+		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
+		>;
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
new file mode 100644
index 000000000..9b0135494
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card-mix+split.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X) ak4613	   (MIX-0)
+ *	(B) CPU1 (2ch)  --/			   (MIX-1)
+ *	(C) CPU2 (2ch)  ----> (8ch) (Y) PCM3168A-p (TDM-0 : 0,1ch)
+ *	(D) CPU3 (2ch)  --/			   (TDM-1 : 2,3ch)
+ *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
+ *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
+ *	(G) CPU6 (6ch) <----  (6ch) (Z) PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
+ *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
+ *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(G) arecord -D plughw:0,6 xxx.wav
+ */
+
+&sound_card {
+	routing = "ak4613 Playback",   "DAI0 Playback",
+		  "ak4613 Playback",   "DAI1 Playback",
+		  "DAI0 Capture",      "ak4613 Capture",
+		  "pcm3168a Playback", "DAI2 Playback",
+		  "pcm3168a Playback", "DAI3 Playback",
+		  "pcm3168a Playback", "DAI4 Playback",
+		  "pcm3168a Playback", "DAI5 Playback";
+
+	dais = <&rsnd_port0 /* (A) CPU0 */
+		&rsnd_port1 /* (B) CPU1 */
+		&rsnd_port2 /* (C) CPU2 */
+		&rsnd_port3 /* (D) CPU3 */
+		&rsnd_port4 /* (E) CPU4 */
+		&rsnd_port5 /* (F) CPU5 */
+		&rsnd_port6 /* (G) GPU6 */
+	>;
+};
+
+&pcm3168a {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk-fs = <512>;
+
+		/*
+		 * (Y) PCM3168A-p
+		 */
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			prefix = "pcm3168a";
+			convert-channels = <8>; /* to 8ch TDM */
+
+			/* (C) CPU2 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p1: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play1>;
+				clocks = <&clksndsel>;
+			};
+			/* (D) CPU3 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p2: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play2>;
+				clocks = <&clksndsel>;
+			};
+			/* (E) CPU4 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p3: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play3>;
+				clocks = <&clksndsel>;
+			};
+			/* (F) CPU5 -> (Y) PCM3168A-p */
+			pcm3168a_endpoint_p4: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&rsnd_for_pcm3168a_play4>;
+				clocks = <&clksndsel>;
+			};
+		};
+		/*
+		 * (Z) PCM3168A-c
+		 */
+		port@1 {
+			reg = <1>;
+			/* (G) CPU6 <- PCM3168A-c */
+			pcm3168a_endpoint_c: endpoint {
+				remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+				clocks = <&clksndsel>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* rsnd_port0-1 are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2
+		 */
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_for_pcm3168a_play1: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p1>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu30 &ssi3>;
+			};
+		};
+		/*
+		 * (D) CPU3
+		 */
+		rsnd_port3: port@3 {
+			reg = <3>;
+			rsnd_for_pcm3168a_play2: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p2>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu31 &ssi3>;
+			};
+		};
+		/*
+		 * (E) CPU4
+		 */
+		rsnd_port4: port@4 {
+			reg = <4>;
+			rsnd_for_pcm3168a_play3: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p3>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu32 &ssi3>;
+			};
+		};
+		/*
+		 * (F) CPU5
+		 */
+		rsnd_port5: port@5 {
+			reg = <5>;
+			rsnd_for_pcm3168a_play4: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p4>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu33 &ssi3>;
+			};
+		};
+		/*
+		 * (G) CPU6
+		 */
+		rsnd_port6: port@6 {
+			reg = <6>;
+			rsnd_for_pcm3168a_capture: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c>;
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <6>;
+				capture  = <&ssi4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
new file mode 100644
index 000000000..1db99b760
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *	(C) CPU2  ----> PCM3168A-p (8ch)
+ *	(D) CPU3 <----  PCM3168A-c (6ch)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *	(C) aplay   -D plughw:0,2 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(D) arecord -D plughw:0,3 xxx.wav
+ */
+
+&sound_card {
+	dais = <&rsnd_port0 /* (A) CPU0 <-> ak4613 */
+		&rsnd_port1 /* (B) CPU1  -> HDMI   */
+		&rsnd_port2 /* (C) CPU2  -> PCM3168A-p */
+		&rsnd_port3 /* (D) CPU3 <-  PCM3168A-c */
+		>;
+};
+
+&pcm3168a {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk-fs = <512>;
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		port@0 {
+			reg = <0>;
+			pcm3168a_endpoint_p: endpoint {
+				remote-endpoint = <&rsnd_for_pcm3168a_play>;
+				clocks = <&clksndsel>;
+			};
+		};
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		port@1 {
+			reg = <1>;
+			pcm3168a_endpoint_c: endpoint {
+				remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+				clocks = <&clksndsel>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* rsnd_port0/1 are defined in ulcb.dtsi */
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		rsnd_port2: port@2 {
+			reg = <2>;
+			rsnd_for_pcm3168a_play: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_p>;
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <8>;
+				playback = <&ssi3>;
+			};
+		};
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		rsnd_port3: port@3 {
+			reg = <3>;
+			rsnd_for_pcm3168a_capture: endpoint {
+				remote-endpoint = <&pcm3168a_endpoint_c>;
+				bitclock-master;
+				frame-master;
+				dai-tdm-slot-num = <6>;
+				capture = <&ssi4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
new file mode 100644
index 000000000..da644128a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2-mix+split.dtsi
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card2 (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X)	ak4613	   (MIX-0)
+ *	(B) CPU1 (2ch)  --/			   (MIX-1)
+ *	(C) CPU3 (2ch)  ----> (8ch) (Y)	PCM3168A-p (TDM-0 : 0,1ch)
+ *	(D) CPU2 (2ch)  --/			   (TDM-1 : 2,3ch)
+ *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
+ *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
+ *	(G) CPU6 (6ch) <----  (6ch) (Z)	PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
+ *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
+ *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(G) arecord -D plughw:0,6 xxx.wav
+ */
+&sound_card {
+	routing = "ak4613 Playback",   "DAI0 Playback",
+		  "ak4613 Playback",   "DAI1 Playback",
+		  "DAI0 Capture",      "ak4613 Capture",
+		  "pcm3168a Playback", "DAI2 Playback",
+		  "pcm3168a Playback", "DAI3 Playback",
+		  "pcm3168a Playback", "DAI4 Playback",
+		  "pcm3168a Playback", "DAI5 Playback",
+		  "DAI6 Capture",      "pcm3168a Capture";
+
+	/delete-property/ dais;
+	links = <&fe_a		/* (A) CPU0	  */
+		 &fe_b		/* (B) CPU1	  */
+		 &fe_c		/* (C) CPU2	  */
+		 &fe_d		/* (D) CPU3	  */
+		 &fe_e		/* (E) CPU4	  */
+		 &fe_f		/* (F) CPU5	  */
+		 &rsnd_g	/* (G) CPU6	  */
+		 &be_x		/* (X) ak4613	  */
+		 &be_y		/* (Y) PCM3168A-p */
+	>;
+
+	dpcm {
+		ports@0 {
+		/*
+		 * FE
+		 *
+		 * (A)/(B) are defined on ulcb
+		 * (C) CPU2
+		 * (D) CPU3
+		 * (E) CPU4
+		 * (F) CPU5
+		 */
+		fe_c:	port@2 { reg = <2>; fe_c_ep: endpoint { remote-endpoint = <&rsnd_c_ep>; }; };
+		fe_d:	port@3 { reg = <3>; fe_d_ep: endpoint { remote-endpoint = <&rsnd_d_ep>; }; };
+		fe_e:	port@4 { reg = <4>; fe_e_ep: endpoint { remote-endpoint = <&rsnd_e_ep>; }; };
+		fe_f:	port@5 { reg = <5>; fe_f_ep: endpoint { remote-endpoint = <&rsnd_f_ep>; }; };
+		};
+
+		ports@1 {
+		/*
+		 * BE
+		 *
+		 * (X) is defined on ulcb
+		 * (Y) PCM3168A-p
+		 */
+		be_y:	port@1 { reg = <1>; be_y_ep: endpoint { remote-endpoint = <&pcm3168a_y_ep>; }; };
+		};
+	};
+};
+
+&pcm3168a {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mclk-fs = <512>;
+		prefix = "pcm3168a";
+
+		/*
+		 * (Y) PCM3168A-p
+		 */
+		port@0 {
+			reg = <0>;
+			convert-channels = <8>; /* to 8ch TDM */
+			pcm3168a_y_ep: endpoint {
+				remote-endpoint = <&be_y_ep>;
+				clocks = <&clksndsel>;
+			};
+		};
+		/*
+		 * (Z) PCM3168A-c
+		 */
+		port@1 {
+			reg = <1>;
+			pcm3168a_z_ep: endpoint {
+				remote-endpoint = <&rsnd_g_ep>;
+				clocks = <&clksndsel>;
+			};
+		};
+	};
+};
+
+&rcar_sound {
+	ports {
+		/* (A)/(B) are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2
+		 */
+		port@2 {
+			reg = <2>;
+			rsnd_c_ep: endpoint {
+				remote-endpoint = <&fe_c_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu30 &ssi3>;
+			};
+		};
+		/*
+		 * (D) CPU3
+		 */
+		port@3 {
+			reg = <3>;
+			rsnd_d_ep: endpoint {
+				remote-endpoint = <&fe_d_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu31 &ssi3>;
+			};
+		};
+		/*
+		 * (E) CPU4
+		 */
+		port@4 {
+			reg = <4>;
+			rsnd_e_ep: endpoint {
+				remote-endpoint = <&fe_e_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu32 &ssi3>;
+			};
+		};
+		/*
+		 * (F) CPU5
+		 */
+		port@5 {
+			reg = <5>;
+			rsnd_f_ep: endpoint {
+				remote-endpoint = <&fe_f_ep>;
+				bitclock-master;
+				frame-master;
+				playback = <&ssiu33 &ssi3>;
+			};
+		};
+		/*
+		 * (G) CPU6
+		 */
+		rsnd_g: port@6 {
+			reg = <6>;
+			rsnd_g_ep: endpoint {
+				remote-endpoint = <&pcm3168a_z_ep>;
+				bitclock-master;
+				frame-master;
+				capture = <&ssi4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
new file mode 100644
index 000000000..c30e05653
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card2.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Audio Graph Card2
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *	(C) CPU2  ----> PCM3168A-p (8ch)
+ *	(D) CPU3 <----  PCM3168A-c (6ch)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *	(C) aplay   -D plughw:0,2 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(D) arecord -D plughw:0,3 xxx.wav
+ */
+#include "ulcb-kf-audio-graph-card.dtsi"
+
+&sound_card {
+	/delete-property/ dais;
+	links = <&rsnd_port0	/* (A) CPU0 <-> ak4613 */
+		 &rsnd_port1	/* (B) CPU1  -> HDMI   */
+		 &rsnd_port2	/* (C) CPU2  -> PCM3168A-p */
+		 &rsnd_port3	/* (D) CPU3 <-  PCM3168A-c */
+		>;
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
new file mode 100644
index 000000000..bc221f994
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card-mix+split.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Simple Audio Card (MIX + TDM Split)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X)	ak4613	   (MIX-0)
+ *	(B) CPU1 (2ch)  --/			   (MIX-1)
+ *	(C) CPU3 (2ch)  ----> (8ch) (Y)	PCM3168A-p (TDM-0 : 0,1ch)
+ *	(D) CPU2 (2ch)  --/			   (TDM-1 : 2,3ch)
+ *	(E) CPU4 (2ch)  --/			   (TDM-2 : 4,5ch)
+ *	(F) CPU5 (2ch)  --/			   (TDM-3 : 6,7ch)
+ *	(G) CPU6 (6ch) <----  (6ch) (Z)	PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav (MIX-0)
+ *	(B) aplay   -D plughw:0,1 xxx.wav (MIX-1)
+ *	(C) aplay   -D plughw:0,2 xxx.wav (TDM-0)
+ *	(D) aplay   -D plughw:0,3 xxx.wav (TDM-1)
+ *	(E) aplay   -D plughw:0,4 xxx.wav (TDM-2)
+ *	(F) aplay   -D plughw:0,5 xxx.wav (TDM-3)
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(G) arecord -D plughw:0,6 xxx.wav
+ */
+
+&sound_card {
+
+	simple-audio-card,routing = "ak4613 Playback",   "DAI0 Playback",
+				    "ak4613 Playback",   "DAI1 Playback",
+				    "DAI0 Capture",      "ak4613 Capture",
+				    "pcm3168a Playback", "DAI2 Playback",
+				    "pcm3168a Playback", "DAI3 Playback",
+				    "pcm3168a Playback", "DAI4 Playback",
+				    "pcm3168a Playback", "DAI5 Playback";
+
+	/* dai-link@0 is defined in ulcb.dtsi */
+
+	simple-audio-card,dai-link@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		convert-channels = <8>; /* to 8ch TDM */
+
+		/*
+		 * (C) CPU2
+		 */
+		cpu@0 {
+			reg = <0>;
+			bitclock-master;
+			frame-master;
+			sound-dai = <&rcar_sound 2>;
+		};
+		/*
+		 * (D) CPU3
+		 */
+		cpu@1 {
+			reg = <1>;
+			sound-dai = <&rcar_sound 3>;
+		};
+		/*
+		 * (E) CPU4
+		 */
+		cpu@2 {
+			reg = <2>;
+			sound-dai = <&rcar_sound 4>;
+		};
+		/*
+		 * (F) CPU5
+		 */
+		cpu@3 {
+			reg = <3>;
+			sound-dai = <&rcar_sound 5>;
+		};
+		/*
+		 * (Y) PCM3168A-p
+		 */
+		codec {
+			prefix = "pcm3168a";
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 0>;
+		};
+	};
+	simple-audio-card,dai-link@2 {
+		reg = <2>;
+		/*
+		 * (G) CPU6
+		 */
+		cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&rcar_sound 6>;
+		};
+		/*
+		 * (Z) PCM3168A-c
+		 */
+		codec {
+			prefix = "pcm3168a";
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 1>;
+		};
+	};
+};
+
+&pcm3168a {
+	/*
+	 * (Y) PCM3168A-p
+	 * (Z) PCM3168A-c
+	 */
+	#sound-dai-cells = <1>;
+};
+
+&rcar_sound {
+	rcar_sound,dai {
+
+		/* dai0-1 are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2
+		 */
+		dai2 {
+			playback = <&ssiu30 &ssi3>;
+		};
+		/*
+		 * (D) CPU3
+		 */
+		dai3 {
+			playback = <&ssiu31 &ssi3>;
+		};
+		/*
+		 * (E) CPU4
+		 */
+		dai4 {
+			playback = <&ssiu32 &ssi3>;
+		};
+		/*
+		 * (F) CPU5
+		 */
+		dai5 {
+			playback = <&ssiu33 &ssi3>;
+		};
+		/*
+		 * (G) CPU6
+		 */
+		dai6 {
+			capture = <&ssi4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
new file mode 100644
index 000000000..2010e8ac7
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-simple-audio-card.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Kingfisher + Simple Audio Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *	(C) CPU2  ----> PCM3168A-p
+ *	(D) CPU3 <----  PCM3168A-c
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *	(C) aplay   -D plughw:0,2 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ *	(D) arecord -D plughw:0,3 xxx.wav
+ */
+
+&sound_card {
+	/* dai-link@0/1 are defined in ulcb.dtsi */
+
+	/*
+	 * (C) CPU2 -> PCM3168A-p
+	 */
+	simple-audio-card,dai-link@2 {
+		reg = <2>;
+		cpu {
+			bitclock-master;
+			frame-master;
+			dai-tdm-slot-num = <8>;
+			sound-dai = <&rcar_sound 2>;
+		};
+		codec {
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 0>;
+		};
+	};
+	/*
+	 * (D) CPU3 <- PCM3168A-c
+	 */
+	simple-audio-card,dai-link@3 {
+		reg = <3>;
+		cpu {
+			bitclock-master;
+			frame-master;
+			dai-tdm-slot-num = <6>;
+			sound-dai = <&rcar_sound 3>;
+		};
+		codec {
+			mclk-fs = <512>;
+			sound-dai = <&pcm3168a 1>;
+		};
+	};
+};
+
+&pcm3168a {
+	/*
+	 * (C) CPU2 -> PCM3168A-p
+	 * (D) CPU3 <- PCM3168A-c
+	 */
+	#sound-dai-cells = <1>;
+};
+
+&rcar_sound {
+
+	rcar_sound,dai {
+		/* dai0-1 are defined in ulcb.dtsi */
+
+		/*
+		 * (C) CPU2 -> PCM3168A-p
+		 */
+		dai2 {
+			playback = <&ssi3>;
+		};
+		/*
+		 * (D) CPU3 <- PCM3168A-c
+		 */
+		dai3 {
+			capture = <&ssi4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
new file mode 100644
index 000000000..3885ef345
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Kingfisher (ULCB extension) board
+ *
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+/ {
+	aliases {
+		serial1 = &hscif0;
+		serial2 = &scif1;
+		serial3 = &hscif1;
+		mmc2 = &sdhi3;
+	};
+
+	clksndsel: clksndsel {
+		#clock-cells = <0>;
+		compatible = "gpio-mux-clock";
+		clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
+		select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi1-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con: endpoint {
+				remote-endpoint = <&adv7513_out>;
+			};
+		};
+	};
+
+	accel_3v3: regulator-acc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "accel-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	hdmi_1v8: regulator-hdmi-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	hdmi_3v3: regulator-hdmi-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	snd_3p3v: regulator-snd_3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "snd-3.3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	snd_vcc5v: regulator-snd_vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "snd-vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wlan_en: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&du {
+	ports {
+		port@0 {
+			du_out_rgb: endpoint {
+				remote-endpoint = <&adv7513_in>;
+			};
+		};
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	i2cmux2: i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+		/* HDMIoSDA, HDMIoSCL */
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			hdmi@3d {
+				compatible = "adi,adv7513";
+				reg = <0x3d>;
+
+				pinctrl-0 = <&hdmi1_pins>;
+				pinctrl-names = "default";
+
+				interrupt-parent = <&gpio2>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				clocks = <&cs2000>;
+				clock-names = "cec";
+
+				pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
+
+				avdd-supply = <&hdmi_1v8>;
+				dvdd-supply = <&hdmi_1v8>;
+				pvdd-supply = <&hdmi_1v8>;
+				dvdd-3v-supply = <&hdmi_3v3>;
+				bgvdd-supply = <&hdmi_1v8>;
+
+				adi,input-depth = <8>;
+				adi,input-colorspace = "rgb";
+				adi,input-clock = "1x";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						adv7513_in: endpoint {
+							remote-endpoint = <&du_out_rgb>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						adv7513_out: endpoint {
+							remote-endpoint = <&hdmi1_con>;
+						};
+					};
+				};
+			};
+		};
+
+		/* Audio_SDA, Audio_SCL */
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			accelerometer@1d {
+				compatible = "st,lsm9ds0-imu";
+				reg = <0x1d>;
+
+				vdd-supply = <&accel_3v3>;
+				vddio-supply = <&accel_3v3>;
+			};
+
+			pcm3168a: audio-codec@44 {
+				#sound-dai-cells = <0>;
+				compatible = "ti,pcm3168a";
+				reg = <0x44>;
+				clocks = <&clksndsel>;
+				clock-names = "scki";
+
+				VDD1-supply = <&snd_3p3v>;
+				VDD2-supply = <&snd_3p3v>;
+				VCCAD1-supply = <&snd_vcc5v>;
+				VCCAD2-supply = <&snd_vcc5v>;
+				VCCDA1-supply = <&snd_vcc5v>;
+				VCCDA2-supply = <&snd_vcc5v>;
+			};
+
+			gyroscope@6b {
+				compatible = "st,lsm9ds0-gyro";
+				reg = <0x6b>;
+
+				vdd-supply = <&accel_3v3>;
+				vddio-supply = <&accel_3v3>;
+			};
+		};
+	};
+
+	/* U11 */
+	gpio_exp_74: gpio@74 {
+		compatible = "ti,tca9539";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		audio-out-off-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
+			output-high;
+			line-name = "Audio_Out_OFF";
+		};
+
+		hub-pwen-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB pwen";
+		};
+
+		hub-rst-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB rst";
+		};
+
+		otg-extlpn-hog {
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "OTG EXTLPn";
+		};
+
+		otg-offvbusn-hog {
+			gpio-hog;
+			gpios = <8 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "OTG OFFVBUSn";
+		};
+
+		sd-wifi-mux-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;	/* Connect WL1837 */
+			line-name = "SD WiFi mux";
+		};
+
+		snd-rst-hog {
+			gpio-hog;
+			gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
+			output-high;
+			line-name = "SND_RST";
+		};
+	};
+
+	/* U5 */
+	gpio_exp_75: gpio@75 {
+		compatible = "ti,tca9539";
+		reg = <0x75>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c4 {
+	i2cmux4: i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_exp_76: gpio@76 {
+		compatible = "ti,tca9539";
+		reg = <0x76>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio7>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	gpio_exp_77: gpio@77 {
+		compatible = "ti,tca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	hdmi1_pins: hdmi1 {
+		adv7513-interrupt {
+			pins = "GP_2_14";
+			bias-pull-up;
+		};
+
+		du {
+			groups = "du_rgb888", "du_sync", "du_clk_out_0",
+				 "du_disp";
+			function = "du";
+		};
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data_b";
+		function = "scif1";
+	};
+
+	sdhi3_pins: sdhi3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sound_pcm_pins: sound-pcm {
+		groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins
+		     &sound_clk_pins
+		     &sound_pcm_pins>;
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en>;
+	vqmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <26000000>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ssi4 {
+	shared-pin;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+/*
+ * For sound-test.
+ *
+ * We can switch Audio Card for testing
+ * see also ulcb.dtsi
+ *
+ * #include "ulcb-kf-simple-audio-card.dtsi"
+ * #include "ulcb-kf-simple-audio-card-mix+split.dtsi"
+ * #include "ulcb-kf-audio-graph-card.dtsi"
+ * #include "ulcb-kf-audio-graph-card-mix+split.dtsi"
+ * #include "ulcb-kf-audio-graph-card2-mix+split.dtsi"
+ */
+#include "ulcb-kf-audio-graph-card2.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
new file mode 100644
index 000000000..217d89019
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card-mix+split.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Simple Audio Card (MIXer)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * Note:
+ * The HDMI output is ignored due to the limited number of subdevices
+ *
+ *	(A) CPU0 (2ch) <----> (2ch) (X) ak4613	(MIX-0)
+ *	(B) CPU1 (2ch)  --/			(MIX-1)
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "simple-scu-audio-card";
+		label = "rcar-sound";
+
+		simple-audio-card,prefix  = "ak4613";
+		simple-audio-card,routing = "ak4613 Playback", "DAI0 Playback",
+					    "ak4613 Playback", "DAI1 Playback",
+					    "DAI0 Capture",    "ak4613 Capture";
+
+		simple-audio-card,dai-link@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			convert-rate = <48000>;
+
+			/*
+			 * (A) CPU0
+			 */
+			cpu@0 {
+				reg = <0>;
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 0>;
+			};
+			/*
+			 * (B) CPU1
+			 */
+			cpu@1 {
+				reg = <1>;
+				sound-dai = <&rcar_sound 1>;
+			};
+			/*
+			 * (X) ak4613
+			 */
+			codec {
+				prefix = "ak4613";
+				sound-dai = <&ak4613>;
+			};
+		};
+	};
+};
+
+&ak4613 {
+	/*
+	 * (X) ak4613
+	 */
+	#sound-dai-cells = <0>;
+};
+
+&rcar_sound {
+	#sound-dai-cells = <1>;
+
+	rcar_sound,dai {
+		/*
+		 * (A) CPU0
+		 */
+		dai0 {
+			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+			capture  = <&ssi1 &src0 &dvc1>;
+		};
+		/*
+		 * (B) CPU1
+		 */
+		dai1 {
+			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
new file mode 100644
index 000000000..751cfd8c5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-simple-audio-card.dtsi
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for ULCB + Simple Audio Card
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ *	(A) CPU0 <----> ak4613
+ *	(B) CPU1  ----> HDMI
+ *
+ *	(A) aplay   -D plughw:0,0 xxx.wav
+ *	(B) aplay   -D plughw:0,1 xxx.wav
+ *
+ *	(A) arecord -D plughw:0,0 xxx.wav
+ */
+
+/ {
+	sound_card: sound {
+		compatible = "simple-audio-card";
+		label = "rcar-sound";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * (A) CPU0 <-> ak4613
+		 */
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 0>;
+			};
+			codec {
+				sound-dai = <&ak4613>;
+			};
+		};
+		/*
+		 * (B) CPU1 -> HDMI
+		 */
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				bitclock-master;
+				frame-master;
+				sound-dai = <&rcar_sound 1>;
+			};
+			codec {
+				sound-dai = <&hdmi0>;
+			};
+		};
+	};
+};
+
+&ak4613 {
+	/*
+	 * (A) CPU0 <-> ak4613
+	 */
+	#sound-dai-cells = <0>;
+};
+
+&hdmi0 {
+	/*
+	 * (B) CPU1 -> HDMI
+	 */
+	#sound-dai-cells = <0>;
+};
+
+&rcar_sound {
+	#sound-dai-cells = <1>;
+
+	rcar_sound,dai {
+		/*
+		 * (A) CPU0 <-> ak4613
+		 */
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+		/*
+		 * (B) CPU1 -> HDMI
+		 */
+		dai1 {
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
new file mode 100644
index 000000000..0be271665
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the R-Car Gen3 ULCB board
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Renesas R-Car Gen3 ULCB board";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c_dvfs;
+		serial0 = &scif2;
+		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led5 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+		led6 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator-vcc-sdhi0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	x23_clk: x23-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&a57_0 {
+	cpu-supply = <&dvfs>;
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0022.1622",
+			     "ethernet-phy-ieee802.3-c22";
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&du {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk-multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5925";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x23_clk>;
+		clock-names = "xin";
+	};
+};
+
+&i2c_dvfs {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	pmic: pmic@30 {
+		pinctrl-0 = <&irq0_pins>;
+		pinctrl-names = "default";
+
+		compatible = "rohm,bd9571mwv";
+		reg = <0x30>;
+		interrupt-parent = <&intc_ex>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		rohm,ddr-backup-power = <0xf>;
+		rohm,rstbmode-pulse;
+
+		regulators {
+			dvfs: dvfs {
+				regulator-name = "dvfs";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1030000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "rohm,br24t01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	irq0_pins: irq0 {
+		groups = "intc_ex_irq0";
+		function = "intc_ex";
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound-clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+			 "audio_clkout_a", "audio_clkout3_a";
+		function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		groups = "usb1";
+		function = "usb1";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+};
+
+&rpc {
+	/* Left disabled.  To be enabled by firmware when unlocked. */
+
+	flash@0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			bl2@40000 {
+				reg = <0x00040000 0x140000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x040000>;
+				read-only;
+			};
+			tee@200000 {
+				reg = <0x00200000 0x440000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x100000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	full-pwr-cycle-in-suspend;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+
+/*
+ * For sound-test.
+ *
+ * We can switch Audio Card for testing
+ *
+ * #include "ulcb-simple-audio-card.dtsi"
+ * #include "ulcb-simple-audio-card-mix+split.dtsi"
+ * #include "ulcb-audio-graph-card.dtsi"
+ * #include "ulcb-audio-graph-card-mix+split.dtsi"
+ * #include "ulcb-audio-graph-card2-mix+split.dtsi"
+ */
+#include "ulcb-audio-graph-card2.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
new file mode 100644
index 000000000..e7728007f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-lion-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-dumo.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s-enterprise.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4se.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
new file mode 100644
index 000000000..3429e124d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/ {
+	aliases {
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";	/* +5V */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&xin32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+	};
+
+	vcc3v3_btreg: vcc3v3-btreg {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_enable_h>;
+		regulator-name = "btreg-gpio-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		states = <3300000 0x0>;
+	};
+
+	vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_rf_aux_mod";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	xin32k: xin32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_3v3>;	/* +3V3_SOM */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	vmmc-supply = <&vcc_3v3>;	/* +3V3_SOM */
+	vqmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
new file mode 100644
index 000000000..80db778c9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio_pwrseq {
+	reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+	enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
new file mode 100644
index 000000000..449b8eb64
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-edimm2.2.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include "px30-engicam-common.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	panel {
+		compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		power-supply = <&vcc3v3_lcd>;
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			lvds_out_panel: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts
new file mode 100644
index 000000000..47aa30505
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2-of10.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
+	compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core",
+		     "rockchip,px30";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight>;
+		power-supply = <&vcc3v3_lcd>;
+		data-mapping = "vesa-24";
+
+		port {
+			panel_in_lvds: endpoint {
+				remote-endpoint = <&lvds_out_panel>;
+			};
+		};
+	};
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&lvds {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			lvds_out_panel: endpoint {
+				remote-endpoint = <&panel_in_lvds>;
+			};
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts
new file mode 100644
index 000000000..5a0ecb8fa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-ctouch2.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core C.TOUCH 2.0";
+	compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
new file mode 100644
index 000000000..165d09ccb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+	model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+	compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
+		     "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio_pwrseq {
+	reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+	enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
new file mode 100644
index 000000000..5eecbefa8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi
@@ -0,0 +1,241 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "engicam,px30-core", "rockchip,px30";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-boot-on;
+				regulator-name = "vcc3v3_lcd";
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_3v3>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3>;
+	pmuio2-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
new file mode 100644
index 000000000..c1bbd555f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	model = "Rockchip PX30 EVB";
+	compatible = "rockchip,px30-evb", "rockchip,px30";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-esc {
+			label = "esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1310000>;
+		};
+
+		button-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <624000>;
+		};
+
+		button-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <987000>;
+		};
+
+		button-down {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-up {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 25000 0>;
+		power-supply = <&vcc3v3_lcd>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+	};
+
+	vcc5v0_sys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&csi_dphy {
+	status = "okay";
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "xinpeng,xpp055c272";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc_1v8>;
+		vci-supply = <&vcc3v3_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v0>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_rmii>;
+	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: vcc_rmii: DCDC_REG4 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG5 {
+				regulator-name = "vcc3v3_sys";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG1 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v0_pmu: LDO_REG4 {
+				regulator-name = "vcc3v0_pmu";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG7 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v5_dvp: LDO_REG9 {
+				regulator-name = "vcc1v5_dvp";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc3v3_lcd: SWITCH_REG1 {
+				regulator-name = "vcc3v3_lcd";
+				regulator-boot-on;
+			};
+
+			vcc5v0_host: SWITCH_REG2 {
+				regulator-name = "vcc5v0_host";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	sensor@d {
+		compatible = "asahi-kasei,ak8963";
+		reg = <0x0d>;
+		gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&vcc3v0_pmu>;
+		mount-matrix = "1", /* x0 */
+			       "0", /* y0 */
+			       "0", /* z0 */
+			       "0", /* x1 */
+			       "1", /* y1 */
+			       "0", /* z1 */
+			       "0", /* x2 */
+			       "0", /* y2 */
+			       "1"; /* z2 */
+	};
+
+	touchscreen@14 {
+		compatible = "goodix,gt1151";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc3v3_lcd>;
+	};
+
+	sensor@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	/* These are relatively safe rise/fall times; TODO: measure */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	ov5695: ov5695@36 {
+		compatible = "ovti,ov5695";
+		reg = <0x36>;
+		avdd-supply = <&vcc2v8_dvp>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		clock-names = "xvclk";
+		dvdd-supply = <&vcc1v5_dvp>;
+		dovdd-supply = <&vcc1v8_dvp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_sdio>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v0>;
+	vccio4-supply = <&vcc3v0_pmu>;
+	vccio5-supply = <&vcc_3v0>;
+	vccio6-supply = <&vccio_flash>;
+};
+
+&isp {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_ucam: endpoint@0 {
+				reg = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ucam_out>;
+			};
+		};
+	};
+};
+
+&isp_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cif-m0 {
+		cif_clkout_m0: cif-clkout-m0 {
+			rockchip,pins =
+				<2 RK_PB3 1 &pcfg_pull_none_12ma>;
+		};
+	};
+
+	mipi {
+		mipi_pdn: mipi-pdn {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmuio1-supply = <&vcc3v0_pmu>;
+	pmuio2-supply = <&vcc3v0_pmu>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdio {
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
new file mode 100644
index 000000000..de0a1f2af
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30-ringneck.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit";
+	compatible = "tsd,px30-ringneck-haikou", "rockchip,px30";
+
+	aliases {
+		mmc2 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&haikou_keys_pin>;
+		pinctrl-names = "default";
+
+		button-batlow-n {
+			label = "BATLOW#";
+			linux,code = <KEY_BATTERY>;
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-slp-btn-n {
+			label = "SLP_BTN#";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wake-n {
+			label = "WAKE#";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-lid-btn-n {
+			label = "LID_BTN#";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+		sd_card_led: led-1 {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc2";
+			function = LED_FUNCTION_SD;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,frame-master = <&sgtl5000_codec>;
+		simple-audio-card,bitclock-master = <&sgtl5000_codec>;
+
+		sgtl5000_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			// Prevent the dai subsystem from overwriting the clock
+			// frequency. We are using a fixed-frequency oscillator.
+			system-clock-fixed;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <24576000>;
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdda_codec: vdda-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+		VDDD-supply = <&vddd_codec>;
+	};
+};
+
+&i2c3 {
+	eeprom@50 {
+		reg = <0x50>;
+		compatible = "atmel,24c01";
+		pagesize = <8>;
+		size = <128>;
+		vcc-supply = <&vcc3v3_baseboard>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pinctrl {
+	haikou {
+		haikou_keys_pin: haikou-keys-pin {
+			rockchip,pins =
+			  /* WAKE# */
+			  <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* LID_BTN */
+			  <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-0 = <&uart5_xfer>;
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
new file mode 100644
index 000000000..123977558
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		mmc1 = &sdio;
+		rtc0 = &rtc_twi;
+		rtc1 = &rk809;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+		status = "okay";
+
+		module_led: led-0 {
+			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_AMBER>;
+		};
+	};
+
+	vcc5v0_sys: vccsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_emmc>;
+
+	status = "okay";
+};
+
+/* On-module TI DP83825I PHY but no connector, enable in carrierboard */
+&gmac {
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	phy-supply = <&vcc_3v3>;
+	clock_in_out = "output";
+};
+
+&gpio2 {
+	/*
+	 * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
+	 * eMMC powered-down initially (in fact it keeps the reset signal
+	 * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
+	 * the SPL has been booted from SD Card.
+	 */
+	bios-disable-override-hog {
+		gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "bios_disable_override";
+		gpio-hog;
+	};
+
+	/*
+	 * The BIOS_DISABLE hog is a feedback pin for the actual status of the
+	 * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually
+	 * represents the state of a switch on the baseboard.
+	 */
+	bios-disable-n-hog {
+		gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
+		line-name = "bios_disable";
+		input;
+		gpio-hog;
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_int>;
+		pinctrl-names = "default";
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_3v3>;
+		vcc6-supply = <&vcc_3v3>;
+		vcc7-supply = <&vcc_3v3>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0_1v8: vcc_emmc: DCDC_REG4 {
+				regulator-name = "vcc_3v0_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_3v3: DCDC_REG5 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v0: LDO_REG3 {
+				regulator-name = "vcc_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vcc_lcd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_1v8_lcd: LDO_REG8 {
+				regulator-name = "vcc_1v8_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG9 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* SE05x is limited to Fast Mode */
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	rockchip,trcm-sync-tx-only;
+
+	pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
+		     &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>;
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_emmc>;
+	vccio-oscgpi-supply = <&vcc_3v3>;
+
+	status = "okay";
+};
+
+&pinctrl {
+	emmc {
+		emmc_reset: emmc-reset {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+/* Mule UCAN */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
new file mode 100644
index 000000000..42ce78beb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -0,0 +1,2440 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,px30";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1350000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1050000 1050000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1175000 1175000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1350000 1350000 1350000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopb_out>, <&vopl_out>;
+		status = "disabled";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_threshold: gpu-threshold {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_target: gpu-target {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	pmu: power-management@ff000000 {
+		compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,px30-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@PX30_PD_USB {
+				reg = <PX30_PD_USB>;
+				clocks = <&cru HCLK_HOST>,
+					 <&cru HCLK_OTG>,
+					 <&cru SCLK_OTG_ADP>;
+				pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_SDCARD {
+				reg = <PX30_PD_SDCARD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sdmmc>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_GMAC {
+				reg = <PX30_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>,
+					 <&cru SCLK_MAC_REF>,
+					 <&cru SCLK_GMAC_RX_TX>;
+				pm_qos = <&qos_gmac>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_MMC_NAND {
+				reg = <PX30_PD_MMC_NAND>;
+				clocks = <&cru HCLK_NANDC>,
+					 <&cru HCLK_EMMC>,
+					 <&cru HCLK_SDIO>,
+					 <&cru HCLK_SFC>,
+					 <&cru SCLK_EMMC>,
+					 <&cru SCLK_NANDC>,
+					 <&cru SCLK_SDIO>,
+					 <&cru SCLK_SFC>;
+				pm_qos = <&qos_emmc>, <&qos_nand>,
+					 <&qos_sdio>, <&qos_sfc>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_VPU {
+				reg = <PX30_PD_VPU>;
+				clocks = <&cru ACLK_VPU>,
+					 <&cru HCLK_VPU>,
+					 <&cru SCLK_CORE_VPU>;
+				pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_VO {
+				reg = <PX30_PD_VO>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru ACLK_VOPB>,
+					 <&cru ACLK_VOPL>,
+					 <&cru DCLK_VOPB>,
+					 <&cru DCLK_VOPL>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VOPB>,
+					 <&cru HCLK_VOPL>,
+					 <&cru PCLK_MIPI_DSI>,
+					 <&cru SCLK_RGA_CORE>,
+					 <&cru SCLK_VOPB_PWM>;
+				pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
+					 <&qos_vop_m0>, <&qos_vop_m1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_VI {
+				reg = <PX30_PD_VI>;
+				clocks = <&cru ACLK_CIF>,
+					 <&cru ACLK_ISP>,
+					 <&cru HCLK_CIF>,
+					 <&cru HCLK_ISP>,
+					 <&cru SCLK_ISP>;
+				pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
+					 <&qos_isp_wr>, <&qos_isp_m1>,
+					 <&qos_vip>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@PX30_PD_GPU {
+				reg = <PX30_PD_GPU>;
+				clocks = <&cru SCLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	pmugrf: syscon@ff010000 {
+		compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,px30-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-bootloader = <BOOT_BL_DOWNLOAD>;
+			mode-fastboot = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+		};
+	};
+
+	uart0: serial@ff030000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff030000 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	i2s0_8ch: i2s@ff060000 {
+		compatible = "rockchip,px30-i2s-tdm";
+		reg = <0x0 0xff060000 0x0 0x1000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0_TX>, <&cru SCLK_I2S0_RX>, <&cru HCLK_I2S0>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac 16>, <&dmac 17>;
+		dma-names = "tx", "rx";
+		rockchip,grf = <&grf>;
+		resets = <&cru SRST_I2S0_TX>, <&cru SRST_I2S0_RX>;
+		reset-names = "tx-m", "rx-m";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_sclkrx
+			     &i2s0_8ch_lrcktx &i2s0_8ch_lrckrx
+			     &i2s0_8ch_sdo0 &i2s0_8ch_sdi0
+			     &i2s0_8ch_sdo1 &i2s0_8ch_sdi1
+			     &i2s0_8ch_sdo2 &i2s0_8ch_sdi2
+			     &i2s0_8ch_sdo3 &i2s0_8ch_sdi3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_2ch: i2s@ff070000 {
+		compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff070000 0x0 0x1000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 18>, <&dmac 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
+			     &i2s1_2ch_sdi &i2s1_2ch_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@ff080000 {
+		compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff080000 0x0 0x1000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 20>, <&dmac 21>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
+			     &i2s2_2ch_sdi &i2s2_2ch_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ff131000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xff131000 0 0x1000>,
+		      <0x0 0xff132000 0 0x2000>,
+		      <0x0 0xff134000 0 0x2000>,
+		      <0x0 0xff136000 0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	grf: syscon@ff140000 {
+		compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,px30-io-voltage-domain";
+			status = "disabled";
+		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_in: port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					lvds_vopb_in: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&vopb_out_lvds>;
+					};
+
+					lvds_vopl_in: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&vopl_out_lvds>;
+					};
+				};
+
+				lvds_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+
+	uart1: serial@ff158000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff158000 0x0 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 2>, <&dmac 3>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff160000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff160000 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 4>, <&dmac 5>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff168000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff168000 0x0 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 6>, <&dmac 7>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff170000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff170000 0x0 0x100>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 8>, <&dmac 9>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+		status = "disabled";
+	};
+
+	uart5: serial@ff178000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff178000 0x0 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 10>, <&dmac 11>;
+		dma-names = "tx", "rx";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff180000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff180000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff190000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff190000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff1a0000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff1a0000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff1b0000 {
+		compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff1b0000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff1d0000 {
+		compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 12>, <&dmac 13>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff1d8000 {
+		compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff1e0000 {
+		compatible = "rockchip,px30-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff1e0000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT_NS>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff200000 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff200010 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff200020 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff200030 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff200030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff208000 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff208010 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff208020 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff208030 {
+		compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff208030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	rktimer: timer@ff210000 {
+		compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	dmac: dma-controller@ff240000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff240000 0x0 0x4000>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_pin>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_pin>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: saradc@ff288000 {
+		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff288000 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	otp: nvmem@ff290000 {
+		compatible = "rockchip,px30-otp";
+		reg = <0x0 0xff290000 0x0 0x4000>;
+		clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>,
+			 <&cru PCLK_OTP_PHY>;
+		clock-names = "otp", "apb_pclk", "phy";
+		resets = <&cru SRST_OTP_PHY>;
+		reset-names = "phy";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells */
+		cpu_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		performance: performance@1e {
+			reg = <0x1e 0x1>;
+			bits = <4 3>;
+		};
+	};
+
+	cru: clock-controller@ff2b0000 {
+		compatible = "rockchip,px30-cru";
+		reg = <0x0 0xff2b0000 0x0 0x1000>;
+		clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+		clock-names = "xin24m", "gpll";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		assigned-clocks = <&cru PLL_NPLL>,
+			<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+			<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+		assigned-clock-rates = <1188000000>,
+			<200000000>, <200000000>,
+			<150000000>, <150000000>,
+			<100000000>, <200000000>;
+	};
+
+	pmucru: clock-controller@ff2bc000 {
+		compatible = "rockchip,px30-pmucru";
+		reg = <0x0 0xff2bc000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+
+		assigned-clocks =
+			<&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+			<&pmucru SCLK_WIFI_PMU>;
+		assigned-clock-rates =
+			<1200000000>, <100000000>,
+			<26000000>;
+	};
+
+	usb2phy_grf: syscon@ff2c0000 {
+		compatible = "rockchip,px30-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff2c0000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,px30-usb2phy";
+			reg = <0x100 0x20>;
+			clocks = <&pmucru SCLK_USBPHY_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			clock-output-names = "usb480m_phy";
+			status = "disabled";
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
+	csi_dphy: phy@ff2f0000 {
+		compatible = "rockchip,px30-csi-dphy";
+		reg = <0x0 0xff2f0000 0x0 0x4000>;
+		clocks = <&cru PCLK_MIPICSIPHY>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VI>;
+		resets = <&cru SRST_MIPICSIPHY_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	usb20_otg: usb@ff300000 {
+		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff300000 0x0 0x40000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff340000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff340000 0x0 0x10000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff350000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff350000 0x0 0x10000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		power-domains = <&power PX30_PD_USB>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff360000 {
+		compatible = "rockchip,px30-gmac";
+		reg = <0x0 0xff360000 0x0 0x10000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
+			 <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
+			 <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac", "clk_mac_speed";
+		rockchip,grf = <&grf>;
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+		power-domains = <&power PX30_PD_GMAC>;
+		resets = <&cru SRST_GMAC_A>;
+		reset-names = "stmmaceth";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ff370000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff370000 0x0 0x4000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <4>;
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		power-domains = <&power PX30_PD_SDCARD>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff380000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff380000 0x0 0x4000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <4>;
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff390000 {
+		compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff390000 0x0 0x4000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		bus-width = <8>;
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	sfc: spi@ff3a0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xff3a0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	nfc: nand-controller@ff3b0000 {
+		compatible = "rockchip,px30-nfc";
+		reg = <0x0 0xff3b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		assigned-clocks = <&cru SCLK_NANDC>;
+		assigned-clock-rates = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+			     &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
+		power-domains = <&power PX30_PD_MMC_NAND>;
+		status = "disabled";
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	gpu: gpu@ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		operating-points-v2 = <&gpu_opp_table>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff442000 {
+		compatible = "rockchip,px30-vpu";
+		reg = <0x0 0xff442000 0x0 0x800>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power PX30_PD_VPU>;
+	};
+
+	vpu_mmu: iommu@ff442800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff442800 0x0 0x100>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power PX30_PD_VPU>;
+	};
+
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+
+			dsi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	vopb: vop@ff460000 {
+		compatible = "rockchip,px30-vop-big";
+		reg = <0x0 0xff460000 0x0 0xefc>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
+			 <&cru HCLK_VOPB>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff460f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff460f00 0x0 0x100>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff470000 {
+		compatible = "rockchip,px30-vop-lit";
+		reg = <0x0 0xff470000 0x0 0xefc>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
+			 <&cru HCLK_VOPL>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff470f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff470f00 0x0 0x100>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp: isp@ff4a0000 {
+		compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
+		reg = <0x0 0xff4a0000 0x0 0x8000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp", "mi", "mipi";
+		clocks = <&cru SCLK_ISP>,
+			 <&cru ACLK_ISP>,
+			 <&cru HCLK_ISP>,
+			 <&cru PCLK_ISP>;
+		clock-names = "isp", "aclk", "hclk", "pclk";
+		iommus = <&isp_mmu>;
+		phys = <&csi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VI>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp_mmu: iommu@ff4a8000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff4a8000 0x0 0x100>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VI>;
+		rockchip,disable-mmu-reset;
+		#iommu-cells = <0>;
+	};
+
+	qos_gmac: qos@ff518000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff518000 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ff520000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff520000 0x0 0x20>;
+	};
+
+	qos_sdmmc: qos@ff52c000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff52c000 0x0 0x20>;
+	};
+
+	qos_emmc: qos@ff538000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538000 0x0 0x20>;
+	};
+
+	qos_nand: qos@ff538080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538080 0x0 0x20>;
+	};
+
+	qos_sdio: qos@ff538100 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538100 0x0 0x20>;
+	};
+
+	qos_sfc: qos@ff538180 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff538180 0x0 0x20>;
+	};
+
+	qos_usb_host: qos@ff540000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff540000 0x0 0x20>;
+	};
+
+	qos_usb_otg: qos@ff540080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff540080 0x0 0x20>;
+	};
+
+	qos_isp_128: qos@ff548000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548000 0x0 0x20>;
+	};
+
+	qos_isp_rd: qos@ff548080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548080 0x0 0x20>;
+	};
+
+	qos_isp_wr: qos@ff548100 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548100 0x0 0x20>;
+	};
+
+	qos_isp_m1: qos@ff548180 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548180 0x0 0x20>;
+	};
+
+	qos_vip: qos@ff548200 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff548200 0x0 0x20>;
+	};
+
+	qos_rga_rd: qos@ff550000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550000 0x0 0x20>;
+	};
+
+	qos_rga_wr: qos@ff550080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550080 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@ff550100 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550100 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@ff550180 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff550180 0x0 0x20>;
+	};
+
+	qos_vpu: qos@ff558000 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff558000 0x0 0x20>;
+	};
+
+	qos_vpu_r128: qos@ff558080 {
+		compatible = "rockchip,px30-qos", "syscon";
+		reg = <0x0 0xff558080 0x0 0x20>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,px30-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff040000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff040000 0x0 0x100>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0_PMU>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff250000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff250000 0x0 0x100>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff270000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff270000 0x0 0x100>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<0 RK_PB0 1 &pcfg_pull_none_smt>,
+					<0 RK_PB1 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<0 RK_PC2 1 &pcfg_pull_none_smt>,
+					<0 RK_PC3 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none_smt>,
+					<2 RK_PC0 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins =
+					<1 RK_PB4 4 &pcfg_pull_none_smt>,
+					<1 RK_PB5 4 &pcfg_pull_none_smt>;
+			};
+		};
+
+		tsadc {
+			tsadc_otp_pin: tsadc-otp-pin {
+				rockchip,pins =
+					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			tsadc_otp_out: tsadc-otp-out {
+				rockchip,pins =
+					<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<0 RK_PB2 1 &pcfg_pull_up>,
+					<0 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<0 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<1 RK_PC1 1 &pcfg_pull_up>,
+					<1 RK_PC0 1 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins =
+					<1 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins =
+					<1 RK_PD2 2 &pcfg_pull_up>,
+					<1 RK_PD3 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_up>,
+					<2 RK_PB6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart3-m0 {
+			uart3m0_xfer: uart3m0-xfer {
+				rockchip,pins =
+					<0 RK_PC0 2 &pcfg_pull_up>,
+					<0 RK_PC1 2 &pcfg_pull_up>;
+			};
+
+			uart3m0_cts: uart3m0-cts {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			uart3m0_rts: uart3m0-rts {
+				rockchip,pins =
+					<0 RK_PC3 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart3-m1 {
+			uart3m1_xfer: uart3m1-xfer {
+				rockchip,pins =
+					<1 RK_PB6 2 &pcfg_pull_up>,
+					<1 RK_PB7 2 &pcfg_pull_up>;
+			};
+
+			uart3m1_cts: uart3m1-cts {
+				rockchip,pins =
+					<1 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			uart3m1_rts: uart3m1-rts {
+				rockchip,pins =
+					<1 RK_PB5 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<1 RK_PD4 2 &pcfg_pull_up>,
+					<1 RK_PD5 2 &pcfg_pull_up>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins =
+					<1 RK_PD6 2 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins =
+					<1 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart5 {
+			uart5_xfer: uart5-xfer {
+				rockchip,pins =
+					<3 RK_PA2 4 &pcfg_pull_up>,
+					<3 RK_PA1 4 &pcfg_pull_up>;
+			};
+
+			uart5_cts: uart5-cts {
+				rockchip,pins =
+					<3 RK_PA3 4 &pcfg_pull_none>;
+			};
+
+			uart5_rts: uart5-rts {
+				rockchip,pins =
+					<3 RK_PA5 4 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<1 RK_PB7 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_csn: spi0-csn {
+				rockchip,pins =
+					<1 RK_PB6 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_miso: spi0-miso {
+				rockchip,pins =
+					<1 RK_PB5 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_mosi: spi0-mosi {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_clk_hs: spi0-clk-hs {
+				rockchip,pins =
+					<1 RK_PB7 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_miso_hs: spi0-miso-hs {
+				rockchip,pins =
+					<1 RK_PB5 3 &pcfg_pull_up_8ma>;
+			};
+
+			spi0_mosi_hs: spi0-mosi-hs {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<3 RK_PB7 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn0: spi1-csn0 {
+				rockchip,pins =
+					<3 RK_PB1 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn1: spi1-csn1 {
+				rockchip,pins =
+					<3 RK_PB2 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_miso: spi1-miso {
+				rockchip,pins =
+					<3 RK_PB6 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_mosi: spi1-mosi {
+				rockchip,pins =
+					<3 RK_PB4 4 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_clk_hs: spi1-clk-hs {
+				rockchip,pins =
+					<3 RK_PB7 4 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_miso_hs: spi1-miso-hs {
+				rockchip,pins =
+					<3 RK_PB6 4 &pcfg_pull_up_8ma>;
+			};
+
+			spi1_mosi_hs: spi1-mosi-hs {
+				rockchip,pins =
+					<3 RK_PB4 4 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		pdm {
+			pdm_clk0m0: pdm-clk0m0 {
+				rockchip,pins =
+					<3 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdm_clk0m1: pdm-clk0m1 {
+				rockchip,pins =
+					<2 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			pdm_clk1: pdm-clk1 {
+				rockchip,pins =
+					<3 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi0m0: pdm-sdi0m0 {
+				rockchip,pins =
+					<3 RK_PD3 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi0m1: pdm-sdi0m1 {
+				rockchip,pins =
+					<2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi1: pdm-sdi1 {
+				rockchip,pins =
+					<3 RK_PD0 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi2: pdm-sdi2 {
+				rockchip,pins =
+					<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			pdm_sdi3: pdm-sdi3 {
+				rockchip,pins =
+					<3 RK_PD2 2 &pcfg_pull_none>;
+			};
+
+			pdm_clk0m0_sleep: pdm-clk0m0-sleep {
+				rockchip,pins =
+					<3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_clk0m_sleep1: pdm-clk0m1-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_clk1_sleep: pdm-clk1-sleep {
+				rockchip,pins =
+					<3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
+				rockchip,pins =
+					<3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi1_sleep: pdm-sdi1-sleep {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi2_sleep: pdm-sdi2-sleep {
+				rockchip,pins =
+					<3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdm_sdi3_sleep: pdm-sdi3-sleep {
+				rockchip,pins =
+					<3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s0 {
+			i2s0_8ch_mclk: i2s0-8ch-mclk {
+				rockchip,pins =
+					<3 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sclktx: i2s0-8ch-sclktx {
+				rockchip,pins =
+					<3 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
+				rockchip,pins =
+					<3 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
+				rockchip,pins =
+					<3 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
+				rockchip,pins =
+					<3 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
+				rockchip,pins =
+					<3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
+				rockchip,pins =
+					<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
+				rockchip,pins =
+					<3 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
+				rockchip,pins =
+					<3 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
+				rockchip,pins =
+					<3 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_2ch_mclk: i2s1-2ch-mclk {
+				rockchip,pins =
+					<2 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sclk: i2s1-2ch-sclk {
+				rockchip,pins =
+					<2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_lrck: i2s1-2ch-lrck {
+				rockchip,pins =
+					<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sdi: i2s1-2ch-sdi {
+				rockchip,pins =
+					<2 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_sdo: i2s1-2ch-sdo {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s2 {
+			i2s2_2ch_mclk: i2s2-2ch-mclk {
+				rockchip,pins =
+					<3 RK_PA1 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sclk: i2s2-2ch-sclk {
+				rockchip,pins =
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_lrck: i2s2-2ch-lrck {
+				rockchip,pins =
+					<3 RK_PA3 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sdi: i2s2-2ch-sdi {
+				rockchip,pins =
+					<3 RK_PA5 2 &pcfg_pull_none>;
+			};
+
+			i2s2_2ch_sdo: i2s2-2ch-sdo {
+				rockchip,pins =
+					<3 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<1 RK_PD6 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<1 RK_PD7 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<1 RK_PD2 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<1 RK_PD2 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD3 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD4 1 &pcfg_pull_up_8ma>,
+					<1 RK_PD5 1 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins =
+					<1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins =
+					<1 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins =
+					<1 RK_PC6 1 &pcfg_pull_up>,
+					<1 RK_PC7 1 &pcfg_pull_up>,
+					<1 RK_PD0 1 &pcfg_pull_up>,
+					<1 RK_PD1 1 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_none_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_rstnout: emmc-rstnout {
+				rockchip,pins =
+					<1 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA3 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<1 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA3 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA4 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA5 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA6 2 &pcfg_pull_up_8ma>,
+					<1 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		flash {
+			flash_cs0: flash-cs0 {
+				rockchip,pins =
+					<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins =
+					<1 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			flash_dqs: flash-dqs {
+				rockchip,pins =
+					<1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			flash_ale: flash-ale {
+				rockchip,pins =
+					<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins =
+					<1 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins =
+					<1 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			flash_csl: flash-csl {
+				rockchip,pins =
+					<1 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins =
+					<1 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins =
+					<1 RK_PA0 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA1 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA2 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA3 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA4 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA5 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA6 1 &pcfg_pull_up_12ma>,
+					<1 RK_PA7 1 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<1 RK_PA0 3 &pcfg_pull_none>,
+					<1 RK_PA1 3 &pcfg_pull_none>,
+					<1 RK_PA2 3 &pcfg_pull_none>,
+					<1 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<1 RK_PA0 3 &pcfg_pull_none>,
+					<1 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<1 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<1 RK_PB1 3 &pcfg_pull_none>;
+			};
+		};
+
+		lcdc {
+			lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
+				rockchip,pins =
+					<3 RK_PA0 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
+				rockchip,pins =
+					<3 RK_PA1 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
+				rockchip,pins =
+					<3 RK_PA2 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
+				rockchip,pins =
+					<3 RK_PA3 1 &pcfg_pull_none_12ma>;
+			};
+
+			lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+					<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+					<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+					<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+					<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+					<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+			};
+
+			lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+			};
+
+			lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
+				rockchip,pins =
+					<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+					<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+					<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+					<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+			};
+
+			lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+					<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+					<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+					<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+					<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+					<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+			};
+
+			lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+					<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+					<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+			};
+
+			lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
+				rockchip,pins =
+					<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+					<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+					<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+					<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+					<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+					<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+					<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+					<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+					<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<2 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins =
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins =
+					<3 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins =
+					<3 RK_PC3 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins =
+					<3 RK_PC4 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins =
+					<3 RK_PC5 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
+					<2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
+					<2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
+					<2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
+					<2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
+					<2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
+					<2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
+					<2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
+					<2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
+			};
+
+			mac_refclk_12ma: mac-refclk-12ma {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none_12ma>;
+			};
+
+			mac_refclk: mac-refclk {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif-m0 {
+			cif_clkout_m0: cif-clkout-m0 {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			dvp_d2d9_m0: dvp-d2d9-m0 {
+				rockchip,pins =
+					<2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
+					<2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
+					<2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
+					<2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
+					<2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
+					<2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
+					<2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
+					<2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
+					<2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
+					<2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
+					<2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
+					<2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
+			};
+
+			dvp_d0d1_m0: dvp-d0d1-m0 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
+					<2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
+			};
+
+			dvp_d10d11_m0:d10-d11-m0 {
+				rockchip,pins =
+					<2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
+					<2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
+			};
+		};
+
+		cif-m1 {
+			cif_clkout_m1: cif-clkout-m1 {
+				rockchip,pins =
+					<3 RK_PD0 3 &pcfg_pull_none>;
+			};
+
+			dvp_d2d9_m1: dvp-d2d9-m1 {
+				rockchip,pins =
+					<3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
+					<3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
+					<3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
+					<3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
+					<3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
+					<3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
+					<3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
+					<3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
+					<3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
+					<3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
+					<3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
+					<3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
+			};
+
+			dvp_d0d1_m1: dvp-d0d1-m1 {
+				rockchip,pins =
+					<3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
+					<3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
+			};
+
+			dvp_d10d11_m1:d10-d11-m1 {
+				rockchip,pins =
+					<3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
+					<3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
+			};
+		};
+
+		isp {
+			isp_prelight: isp-prelight {
+				rockchip,pins =
+					<3 RK_PD1 4 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
new file mode 100644
index 000000000..184b84fdd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3308.dtsi"
+
+/ {
+	model = "Rockchip RK3308 EVB";
+	compatible = "rockchip,rk3308-evb", "rockchip,rk3308";
+
+	chosen {
+		stdout-path = "serial4:1500000n8";
+	};
+
+	adc-keys0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-func {
+			linux,code = <KEY_FN>;
+			label = "function";
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	adc-keys1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		poll-interval = <100>;
+		keyup-threshold-microvolt = <1800000>;
+
+		button-esc {
+			linux,code = <KEY_MICMUTE>;
+			label = "micmute";
+			press-threshold-microvolt = <1130000>;
+		};
+
+		button-home {
+			linux,code = <KEY_MODE>;
+			label = "mode";
+			press-threshold-microvolt = <901000>;
+		};
+
+		button-menu {
+			linux,code = <KEY_PLAY>;
+			label = "play";
+			press-threshold-microvolt = <624000>;
+		};
+
+		button-down {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-up {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vccio_sdio: vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_ddr: vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_flash: vccio-flash {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_flash";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host: vcc5v0-host {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_drv>;
+		regulator-name = "vbus_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_1v0: vdd-1v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	buttons {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_drv: usb-drv {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
new file mode 100644
index 000000000..9232357f4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3308-CC board";
+	compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	ir_tx {
+		compatible = "pwm-ir-tx";
+		pwms = <&pwm5 0 25000 0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			label = "firefly:red:power";
+			linux,default-trigger = "ir-power-click";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		user_led: led-1 {
+			label = "firefly:blue:user";
+			linux,default-trigger = "ir-user-click";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	typec_vcc5v: typec-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "typec_vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&typec_vcc5v>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_sdmmc: vcc-sdmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sdmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_sd: vcc-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&pwm5 {
+	status = "okay";
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm5_pin_pull_down>;
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin  {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&sdmmc {
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <300>;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdmmc>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
new file mode 100644
index 000000000..e9810d2f0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
+ * Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
+ */
+
+/dts-v1/;
+#include "rk3308.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi S";
+	compatible = "radxa,rockpis", "rockchip,rk3308";
+
+	aliases {
+		ethernet0 = &gmac;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
+
+		green-led {
+			default-state = "on";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+			label = "rockpis:green:power";
+			linux,default-trigger = "default-on";
+		};
+
+		blue-led {
+			default-state = "on";
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+			label = "rockpis:blue:user";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_core: vdd-core {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_core";
+		regulator-min-microvolt = <827000>;
+		regulator-max-microvolt = <1340000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_io>;
+	snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_32k>;
+
+	leds {
+		green_led_gio: green-led-gpio {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		heartbeat_led_gpio: heartbeat-led-gpio {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+	pinctrl-0 = <&pwm0_pin_pull_down>;
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <1000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usb_host_ehci {
+	status = "okay";
+};
+
+&usb_host_ohci {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
new file mode 100644
index 000000000..2ae4bb7d5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -0,0 +1,1883 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ */
+
+#include <dt-bindings/clock/rk3308-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3308";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <90>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			next-level-cache = <&l2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000 950000 1340000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000 950000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1025000 1025000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1125000 1125000 1340000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	mac_clkin: external-mac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+		clock-output-names = "mac_clkin";
+		#clock-cells = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	grf: grf@ff000000 {
+		compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff000000 0x0 0x08000>;
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x500>;
+			mode-bootloader = <BOOT_BL_DOWNLOAD>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-fastboot = <BOOT_FASTBOOT>;
+		};
+	};
+
+	usb2phy_grf: syscon@ff008000 {
+		compatible = "rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff008000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,rk3308-usb2phy";
+			reg = <0x100 0x10>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			clocks = <&cru SCLK_USBPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	detect_grf: syscon@ff00b000 {
+		compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff00b000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	core_grf: syscon@ff00c000 {
+		compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff00c000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	i2c0: i2c@ff040000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff050000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff050000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff060000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff060000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff070000 {
+		compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff070000 0x0 0x1000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3m0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff080000 {
+		compatible = "rockchip,rk3308-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff080000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff0a0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff0b0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff0c0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m0_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff0d0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0d0000 0x0 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff0e0000 {
+		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff0e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff120000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff130000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff140000 {
+		compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 16>, <&dmac1 17>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@ff160000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm8_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@ff160010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm9_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@ff160020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm10_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@ff160030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff160030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm11_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@ff170000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm4_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@ff170010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm5_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@ff170020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm6_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@ff170030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff170030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm7_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff180000 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff180010 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff180020 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff180030 {
+		compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xff180030 0x0 0x10>;
+		clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	rktimer: rktimer@ff1a0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x0 0xff1a0000 0x0 0x20>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	saradc: saradc@ff1e0000 {
+		compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff1e0000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		#io-channel-cells = <1>;
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	dmac0: dma-controller@ff2c0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	dmac1: dma-controller@ff2d0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff2d0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	i2s_2ch_0: i2s@ff350000 {
+		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff350000 0x0 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1 8>, <&dmac1 9>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>;
+		reset-names = "reset-m", "reset-h";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_2ch_0_sclk
+			     &i2s_2ch_0_lrck
+			     &i2s_2ch_0_sdi
+			     &i2s_2ch_0_sdo>;
+		status = "disabled";
+	};
+
+	i2s_2ch_1: i2s@ff360000 {
+		compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff360000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac1 11>;
+		dma-names = "rx";
+		resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>;
+		reset-names = "reset-m", "reset-h";
+		status = "disabled";
+	};
+
+	spdif_tx: spdif-tx@ff3a0000 {
+		compatible = "rockchip,rk3308-spdif", "rockchip,rk3066-spdif";
+		reg = <0x0 0xff3a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac1 13>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_out>;
+		status = "disabled";
+	};
+
+	usb20_otg: usb@ff400000 {
+		compatible = "rockchip,rk3308-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff400000 0x0 0x40000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host_ehci: usb@ff440000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff440000 0x0 0x10000>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host_ohci: usb@ff450000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@ff480000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff480000 0x0 0x4000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <4>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff490000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff490000 0x0 0x4000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <8>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff4a0000 {
+		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff4a0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		bus-width = <4>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+		status = "disabled";
+	};
+
+	nfc: nand-controller@ff4b0000 {
+		compatible = "rockchip,rk3308-nfc",
+			     "rockchip,rv1108-nfc";
+		reg = <0x0 0xff4b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+		clock-names = "ahb", "nfc";
+		assigned-clocks = <&cru SCLK_NANDC>;
+		assigned-clock-rates = <150000000>;
+		pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0
+			     &flash_rdn &flash_rdy &flash_wrn>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff4e0000 {
+		compatible = "rockchip,rk3308-gmac";
+		reg = <0x0 0xff4e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX_TX>,
+			 <&cru SCLK_MAC_RX_TX>, <&cru SCLK_MAC_REF>,
+			 <&cru SCLK_MAC>, <&cru ACLK_MAC>,
+			 <&cru PCLK_MAC>, <&cru SCLK_MAC_RMII>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac", "clk_mac_speed";
+		phy-mode = "rmii";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+		resets = <&cru SRST_MAC_A>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	sfc: spi@ff4c0000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xff4c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	cru: clock-controller@ff500000 {
+		compatible = "rockchip,rk3308-cru";
+		reg = <0x0 0xff500000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru SCLK_RTC32K>;
+		assigned-clock-rates = <32768>;
+	};
+
+	gic: interrupt-controller@ff580000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xff581000 0x0 0x1000>,
+		      <0x0 0xff582000 0x0 0x2000>,
+		      <0x0 0xff584000 0x0 0x2000>,
+		      <0x0 0xff586000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		#address-cells = <0>;
+	};
+
+	sram: sram@fff80000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xfff80000 0x0 0x40000>;
+		ranges = <0 0x0 0xfff80000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* reserved for ddr dvfs and system suspend/resume */
+		ddr-sram@0 {
+			reg = <0x0 0x8000>;
+		};
+
+		/* reserved for vad audio buffer */
+		vad_sram: vad-sram@8000 {
+			reg = <0x8000 0x38000>;
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3308-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff220000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff220000 0x0 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff230000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff230000 0x0 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff240000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff240000 0x0 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff250000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff250000 0x0 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@ff260000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff260000 0x0 0x100>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_smt: pcfg-pull-none-smt {
+			bias-disable;
+			input-schmitt-enable;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins =
+					<3 RK_PB1 2 &pcfg_pull_none_8ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			emmc_rstn: emmc-rstn {
+				rockchip,pins =
+					<3 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_up_8ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA1 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA2 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA3 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA4 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA5 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA6 2 &pcfg_pull_up_8ma>,
+					<3 RK_PA7 2 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		flash {
+			flash_csn0: flash-csn0 {
+				rockchip,pins =
+					<3 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			flash_rdy: flash-rdy {
+				rockchip,pins =
+					<3 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			flash_ale: flash-ale {
+				rockchip,pins =
+					<3 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			flash_cle: flash-cle {
+				rockchip,pins =
+					<3 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			flash_wrn: flash-wrn {
+				rockchip,pins =
+					<3 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			flash_rdn: flash-rdn {
+				rockchip,pins =
+					<3 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			flash_bus8: flash-bus8 {
+				rockchip,pins =
+					<3 RK_PA0 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA1 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA2 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA3 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA4 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA5 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA6 1 &pcfg_pull_up_12ma>,
+					<3 RK_PA7 1 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		sfc {
+			sfc_bus4: sfc-bus4 {
+				rockchip,pins =
+					<3 RK_PA0 3 &pcfg_pull_none>,
+					<3 RK_PA1 3 &pcfg_pull_none>,
+					<3 RK_PA2 3 &pcfg_pull_none>,
+					<3 RK_PA3 3 &pcfg_pull_none>;
+			};
+
+			sfc_bus2: sfc-bus2 {
+				rockchip,pins =
+					<3 RK_PA0 3 &pcfg_pull_none>,
+					<3 RK_PA1 3 &pcfg_pull_none>;
+			};
+
+			sfc_cs0: sfc-cs0 {
+				rockchip,pins =
+					<3 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			sfc_clk: sfc-clk {
+				rockchip,pins =
+					<3 RK_PA5 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_txen */
+					<1 RK_PC1 3 &pcfg_pull_none_12ma>,
+					/* mac_txd1 */
+					<1 RK_PC3 3 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<1 RK_PC2 3 &pcfg_pull_none_12ma>,
+					/* mac_rxd0 */
+					<1 RK_PC4 3 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<1 RK_PC5 3 &pcfg_pull_none>,
+					/* mac_rxer */
+					<1 RK_PB7 3 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<1 RK_PC0 3 &pcfg_pull_none>,
+					/* mac_mdio */
+					<1 RK_PB6 3 &pcfg_pull_none>,
+					/* mac_mdc */
+					<1 RK_PB5 3 &pcfg_pull_none>;
+			};
+
+			mac_refclk_12ma: mac-refclk-12ma {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_none_12ma>;
+			};
+
+			mac_refclk: mac-refclk {
+				rockchip,pins =
+					<1 RK_PB4 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac-m1 {
+			rmiim1_pins: rmiim1-pins {
+				rockchip,pins =
+					/* mac_txen */
+					<4 RK_PB7 2 &pcfg_pull_none_12ma>,
+					/* mac_txd1 */
+					<4 RK_PA5 2 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<4 RK_PA4 2 &pcfg_pull_none_12ma>,
+					/* mac_rxd0 */
+					<4 RK_PA2 2 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<4 RK_PA3 2 &pcfg_pull_none>,
+					/* mac_rxer */
+					<4 RK_PA0 2 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<4 RK_PA1 2 &pcfg_pull_none>,
+					/* mac_mdio */
+					<4 RK_PB6 2 &pcfg_pull_none>,
+					/* mac_mdc */
+					<4 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			macm1_refclk_12ma: macm1-refclk-12ma {
+				rockchip,pins =
+					<4 RK_PB4 2 &pcfg_pull_none_12ma>;
+			};
+
+			macm1_refclk: macm1-refclk {
+				rockchip,pins =
+					<4 RK_PB4 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<1 RK_PD0 2 &pcfg_pull_none_smt>,
+					<1 RK_PD1 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<0 RK_PB3 1 &pcfg_pull_none_smt>,
+					<0 RK_PB4 1 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PA2 3 &pcfg_pull_none_smt>,
+					<2 RK_PA3 3 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m0 {
+			i2c3m0_xfer: i2c3m0-xfer {
+				rockchip,pins =
+					<0 RK_PB7 2 &pcfg_pull_none_smt>,
+					<0 RK_PC0 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m1 {
+			i2c3m1_xfer: i2c3m1-xfer {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_none_smt>,
+					<3 RK_PB5 2 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2c3-m2 {
+			i2c3m2_xfer: i2c3m2-xfer {
+				rockchip,pins =
+					<2 RK_PA1 3 &pcfg_pull_none_smt>,
+					<2 RK_PA0 3 &pcfg_pull_none_smt>;
+			};
+		};
+
+		i2s_2ch_0 {
+			i2s_2ch_0_mclk: i2s-2ch-0-mclk {
+				rockchip,pins =
+					<4 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sclk: i2s-2ch-0-sclk {
+				rockchip,pins =
+					<4 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_lrck: i2s-2ch-0-lrck {
+				rockchip,pins =
+					<4 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sdo: i2s-2ch-0-sdo {
+				rockchip,pins =
+					<4 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s_2ch_0_sdi: i2s-2ch-0-sdi {
+				rockchip,pins =
+					<4 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_0 {
+			i2s_8ch_0_mclk: i2s-8ch-0-mclk {
+				rockchip,pins =
+					<2 RK_PA4 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sclktx: i2s-8ch-0-sclktx {
+				rockchip,pins =
+					<2 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx {
+				rockchip,pins =
+					<2 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx {
+				rockchip,pins =
+					<2 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx {
+				rockchip,pins =
+					<2 RK_PB0 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 {
+				rockchip,pins =
+					<2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 {
+				rockchip,pins =
+					<2 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 {
+				rockchip,pins =
+					<2 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 {
+				rockchip,pins =
+					<2 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 {
+				rockchip,pins =
+					<2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 {
+				rockchip,pins =
+					<2 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_1_m0 {
+			i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk {
+				rockchip,pins =
+					<1 RK_PA2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx {
+				rockchip,pins =
+					<1 RK_PA3 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx {
+				rockchip,pins =
+					<1 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx {
+				rockchip,pins =
+					<1 RK_PA5 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx {
+				rockchip,pins =
+					<1 RK_PA6 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 {
+				rockchip,pins =
+					<1 RK_PA7 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 {
+				rockchip,pins =
+					<1 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 {
+				rockchip,pins =
+					<1 RK_PB3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s_8ch_1_m1 {
+			i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk {
+				rockchip,pins =
+					<1 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx {
+				rockchip,pins =
+					<1 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx {
+				rockchip,pins =
+					<1 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx {
+				rockchip,pins =
+					<1 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx {
+				rockchip,pins =
+					<1 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 {
+				rockchip,pins =
+					<1 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 {
+				rockchip,pins =
+					<1 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 {
+				rockchip,pins =
+					<1 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 {
+				rockchip,pins =
+					<1 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 {
+				rockchip,pins =
+					<1 RK_PC5 2 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m0 {
+			pdm_m0_clk: pdm-m0-clk {
+				rockchip,pins =
+					<1 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi0: pdm-m0-sdi0 {
+				rockchip,pins =
+					<1 RK_PB3 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi1: pdm-m0-sdi1 {
+				rockchip,pins =
+					<1 RK_PB2 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi2: pdm-m0-sdi2 {
+				rockchip,pins =
+					<1 RK_PB1 3 &pcfg_pull_none>;
+			};
+
+			pdm_m0_sdi3: pdm-m0-sdi3 {
+				rockchip,pins =
+					<1 RK_PB0 3 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m1 {
+			pdm_m1_clk: pdm-m1-clk {
+				rockchip,pins =
+					<1 RK_PB6 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi0: pdm-m1-sdi0 {
+				rockchip,pins =
+					<1 RK_PC5 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi1: pdm-m1-sdi1 {
+				rockchip,pins =
+					<1 RK_PC4 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi2: pdm-m1-sdi2 {
+				rockchip,pins =
+					<1 RK_PC3 4 &pcfg_pull_none>;
+			};
+
+			pdm_m1_sdi3: pdm-m1-sdi3 {
+				rockchip,pins =
+					<1 RK_PC2 4 &pcfg_pull_none>;
+			};
+		};
+
+		pdm_m2 {
+			pdm_m2_clkm: pdm-m2-clkm {
+				rockchip,pins =
+					<2 RK_PA4 3 &pcfg_pull_none>;
+			};
+
+			pdm_m2_clk: pdm-m2-clk {
+				rockchip,pins =
+					<2 RK_PA6 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi0: pdm-m2-sdi0 {
+				rockchip,pins =
+					<2 RK_PB5 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi1: pdm-m2-sdi1 {
+				rockchip,pins =
+					<2 RK_PB6 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi2: pdm-m2-sdi2 {
+				rockchip,pins =
+					<2 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			pdm_m2_sdi3: pdm-m2-sdi3 {
+				rockchip,pins =
+					<2 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB5 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<0 RK_PB6 1 &pcfg_pull_none>;
+			};
+
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB6 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PB7 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			pwm3_pin_pull_down: pwm3-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC0 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm4 {
+			pwm4_pin: pwm4-pin {
+				rockchip,pins =
+					<0 RK_PA1 2 &pcfg_pull_none>;
+			};
+
+			pwm4_pin_pull_down: pwm4-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PA1 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm5 {
+			pwm5_pin: pwm5-pin {
+				rockchip,pins =
+					<0 RK_PC1 2 &pcfg_pull_none>;
+			};
+
+			pwm5_pin_pull_down: pwm5-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC1 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm6 {
+			pwm6_pin: pwm6-pin {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pwm6_pin_pull_down: pwm6-pin-pull-down {
+				rockchip,pins =
+					<0 RK_PC2 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm7 {
+			pwm7_pin: pwm7-pin {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_none>;
+			};
+
+			pwm7_pin_pull_down: pwm7-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm8 {
+			pwm8_pin: pwm8-pin {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>;
+			};
+
+			pwm8_pin_pull_down: pwm8-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm9 {
+			pwm9_pin: pwm9-pin {
+				rockchip,pins =
+					<2 RK_PB3 2 &pcfg_pull_none>;
+			};
+
+			pwm9_pin_pull_down: pwm9-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB3 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm10 {
+			pwm10_pin: pwm10-pin {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_none>;
+			};
+
+			pwm10_pin_pull_down: pwm10-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PB4 2 &pcfg_pull_down>;
+			};
+		};
+
+		pwm11 {
+			pwm11_pin: pwm11-pin {
+				rockchip,pins =
+					<2 RK_PC0 4 &pcfg_pull_none>;
+			};
+
+			pwm11_pin_pull_down: pwm11-pin-pull-down {
+				rockchip,pins =
+					<2 RK_PC0 4 &pcfg_pull_down>;
+			};
+		};
+
+		rtc {
+			rtc_32k: rtc-32k {
+				rockchip,pins =
+					<0 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<4 RK_PD5 1 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<4 RK_PD4 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_det: sdmmc-det {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_pwren: sdmmc-pwren {
+				rockchip,pins =
+					<4 RK_PD6 1 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<4 RK_PD0 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<4 RK_PD0 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD1 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD2 1 &pcfg_pull_up_4ma>,
+					<4 RK_PD3 1 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins =
+					<4 RK_PA5 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins =
+					<4 RK_PA4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_pwren: sdio-pwren {
+				rockchip,pins =
+					<0 RK_PA2 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_wrpt: sdio-wrpt {
+				rockchip,pins =
+					<0 RK_PA1 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_intn: sdio-intn {
+				rockchip,pins =
+					<0 RK_PA0 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins =
+					<4 RK_PA0 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins =
+					<4 RK_PA0 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA1 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA2 1 &pcfg_pull_up_8ma>,
+					<4 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+		};
+
+		spdif_in {
+			spdif_in: spdif-in {
+				rockchip,pins =
+					<0 RK_PC2 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif_out {
+			spdif_out: spdif-out {
+				rockchip,pins =
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<2 RK_PA2 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_csn0: spi0-csn0 {
+				rockchip,pins =
+					<2 RK_PA3 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_miso: spi0-miso {
+				rockchip,pins =
+					<2 RK_PA0 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi0_mosi: spi0-mosi {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<3 RK_PB3 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_csn0: spi1-csn0 {
+				rockchip,pins =
+					<3 RK_PB5 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_miso: spi1-miso {
+				rockchip,pins =
+					<3 RK_PB2 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi1_mosi: spi1-mosi {
+				rockchip,pins =
+					<3 RK_PB4 3 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		spi1-m1 {
+			spi1m1_miso: spi1m1-miso {
+				rockchip,pins =
+					<2 RK_PA4 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_mosi: spi1m1-mosi {
+				rockchip,pins =
+					<2 RK_PA5 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_clk: spi1m1-clk {
+				rockchip,pins =
+					<2 RK_PA7 2 &pcfg_pull_up_4ma>;
+			};
+
+			spi1m1_csn0: spi1m1-csn0 {
+				rockchip,pins =
+					<2 RK_PB1 2 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins =
+					<1 RK_PD0 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_csn0: spi2-csn0 {
+				rockchip,pins =
+					<1 RK_PD1 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_miso: spi2-miso {
+				rockchip,pins =
+					<1 RK_PC6 3 &pcfg_pull_up_4ma>;
+			};
+
+			spi2_mosi: spi2-mosi {
+				rockchip,pins =
+					<1 RK_PC7 3 &pcfg_pull_up_4ma>;
+			};
+		};
+
+		tsadc {
+			tsadc_otp_pin: tsadc-otp-pin {
+				rockchip,pins =
+					<0 RK_PB2 0 &pcfg_pull_none>;
+			};
+
+			tsadc_otp_out: tsadc-otp-out {
+				rockchip,pins =
+					<0 RK_PB2 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<2 RK_PA1 1 &pcfg_pull_up>,
+					<2 RK_PA0 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<2 RK_PA2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<2 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_pin: uart0-rts-pin {
+				rockchip,pins =
+					<2 RK_PA3 0 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<1 RK_PD1 1 &pcfg_pull_up>,
+					<1 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins =
+					<1 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins =
+					<1 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2-m0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins =
+					<1 RK_PC7 2 &pcfg_pull_up>,
+					<1 RK_PC6 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-m1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins =
+					<4 RK_PD3 2 &pcfg_pull_up>,
+					<4 RK_PD2 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins =
+					<3 RK_PB5 4 &pcfg_pull_up>,
+					<3 RK_PB4 4 &pcfg_pull_up>;
+			};
+		};
+
+		uart3-m1 {
+			uart3m1_xfer: uart3m1-xfer {
+				rockchip,pins =
+					<0 RK_PC2 3 &pcfg_pull_up>,
+					<0 RK_PC1 3 &pcfg_pull_up>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<4 RK_PB1 1 &pcfg_pull_up>,
+					<4 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins =
+					<4 RK_PA6 1 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins =
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			uart4_rts_pin: uart4-rts-pin {
+				rockchip,pins =
+					<4 RK_PA7 0 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
new file mode 100644
index 000000000..1deef53a4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "A95X Z2";
+	compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&cyx_led_pin>;
+		pinctrl-names = "default";
+
+		cyx_led: led-0 {
+			default-state = "on";
+			gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_LOW>;
+			label = "CYX_LED";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	/* Power tree */
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_otg_vbus: otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&otg_vbus_drv>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vccio_3v3>;
+	};
+
+	vdd_arm: vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-settling-time-up-us = <250>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu0_opp_table {
+	opp-1200000000 {
+		status = "disabled";
+	};
+
+	opp-1296000000 {
+		status = "disabled";
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&gmac2phy {
+	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+	assigned-clock-rate = <50000000>;
+	assigned-clocks = <&cru SCLK_MAC2PHY>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_log>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	pmuio-supply = <&vccio_3v3>;
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio3-supply = <&vccio_3v3>;
+	vccio4-supply = <&vccio_1v8>;
+	vccio5-supply = <&vccio_3v3>;
+	vccio6-supply = <&vccio_3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		cyx_led_pin: cyx-led-pin {
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		pwm0_pin_pull_up: pwm0-pin-pull-up {
+			rockchip,pins = <2 RK_PA4 1 &pcfg_pull_up>;
+		};
+	};
+
+	pwm1 {
+		pwm1_pin_pull_up: pwm1-pin-pull-up {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		clk_32k_out: clk-32k-out {
+			rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pin_pull_up>;
+	pinctrl-names = "active";
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1_pin_pull_up>;
+	pinctrl-names = "active";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vccio_1v8>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <125000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
+&soc_crit {
+	temperature = <115000>; /* millicelsius */
+};
+
+&target {
+	temperature = <105000>; /* millicelsius */
+};
+
+&threshold {
+	temperature = <90000>; /* millicelsius */
+};
+
+&tsadc {
+	rockchip,hw-tshut-temp = <120000>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	phy-supply = <&vcc_otg_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
new file mode 100644
index 000000000..ce318e05f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "Anbernic RG351M";
+	compatible = "anbernic,rg351m", "rockchip,rk3326";
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-names = "enable";
+	};
+};
+
+/delete-node/ &builtin_gamepad;
+/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
+
+&internal_display {
+	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+/delete-node/ &rk817_charger;
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
new file mode 100644
index 000000000..80fc53c80
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_bl>;
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	builtin_gamepad: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&btn_pins>;
+
+		button-sw1 {
+			gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+		button-sw2 {
+			gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+		button-sw3 {
+			gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+		button-sw4 {
+			gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+		button-sw5 {
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+		button-sw6 {
+			gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+		button-sw7 {
+			gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+		button-sw8 {
+			gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+		btn_f1: button-sw9 {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "F1";
+			linux,code = <BTN_TRIGGER_HAPPY1>;
+		};
+		btn_f2: button-sw10 {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "F2";
+			linux,code = <BTN_TRIGGER_HAPPY2>;
+		};
+		btn_f3: button-sw11 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "F3";
+			linux,code = <BTN_TRIGGER_HAPPY3>;
+		};
+		btn_f4: button-sw12 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "F4";
+			linux,code = <BTN_TRIGGER_HAPPY4>;
+		};
+		btn_f5: button-sw13 {
+			gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "F5";
+			linux,code = <BTN_TRIGGER_HAPPY5>;
+		};
+		btn_f6: button-sw14 {
+			gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "F6";
+			linux,code = <BTN_TRIGGER_HAPPY6>;
+		};
+		button-sw15 {
+			gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT";
+			linux,code = <BTN_TL>;
+		};
+		button-sw16 {
+			gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT";
+			linux,code = <BTN_TR>;
+		};
+	};
+
+	/* led-1 is wired directly to output of always-on regulator */
+
+	gpio_led: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&red_led_pin>;
+
+		red_led: led-3 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CHARGING;
+		};
+	};
+
+	pwm_led: led-controller {
+		compatible = "pwm-leds";
+
+		blue_led: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <255>;
+			pwms = <&pwm3 0 25000 0>;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+	};
+
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v8_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_host: vcc_host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&usb_midu>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+	assigned-clocks = <&cru PLL_NPLL>,
+		<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+		<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+		<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+	assigned-clock-rates = <1188000000>,
+		<200000000>, <200000000>,
+		<150000000>, <150000000>,
+		<100000000>, <200000000>;
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	internal_display: panel@0 {
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_dphy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <16>;
+	i2c-scl-rising-time-ns = <280>;
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vccsys>;
+		vcc2-supply = <&vccsys>;
+		vcc3-supply = <&vccsys>;
+		vcc4-supply = <&vccsys>;
+		vcc5-supply = <&vccsys>;
+		vcc6-supply = <&vccsys>;
+		vcc7-supply = <&vccsys>;
+		vcc8-supply = <&vccsys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_1v0: LDO_REG3 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG4 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_sd: LDO_REG6 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_bl: LDO_REG7 {
+				regulator-name = "vcc_bl";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_lcd: LDO_REG8 {
+				regulator-name = "vcc_lcd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <2800000>;
+				};
+			};
+
+			LDO_REG9 {
+				/* unused */
+			};
+
+			usb_midu: BOOST {
+				regulator-name = "usb_midu";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		rk817_charger: charger {
+			rockchip,resistor-sense-micro-ohms = <10000>;
+			rockchip,sleep-enter-current-microamp = <300000>;
+			rockchip,sleep-filter-current-microamp = <100000>;
+		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
+	};
+};
+
+/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+/* I2S 1 Channel Used */
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vccio_sd>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "disabled";
+	};
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		red_led_pin: red-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dc_det: dc-det {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 000000000..d94ac81eb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance Black Edition";
+	compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+	aliases {
+		mmc1 = &sdio;
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+			};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&builtin_gamepad {
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
+};
+
+&rk817 {
+	regulators {
+		vcc_wifi: LDO_REG9 {
+			regulator-name = "vcc_wifi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_pwrseq_pins: wifi-pwrseq-pins {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
new file mode 100644
index 000000000..aa6f5b122
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance";
+	compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&saradc 1>,
+			      <&saradc 2>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <172 772>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <278 815>;
+			linux,code = <ABS_Y>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd35t133";
+	iovcc-supply = <&vcc_lcd>;
+	vdd-supply = <&vcc_lcd>;
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 000000000..35bbaf559
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent";
+		#io-channel-cells = <1>;
+
+		mux-controls = <&joystick_mux_controller>;
+		channels = "0", "1", "2", "3";
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&joystick_mux 0>,
+			      <&joystick_mux 1>,
+			      <&joystick_mux 2>,
+			      <&joystick_mux 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+
+	gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-volume-up {
+			gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
+
+/* f1 and f2 conflict with volume buttons */
+/delete-node/ &btn_f1;
+/delete-node/ &btn_f2;
+
+&builtin_gamepad {
+	button-sw19 {
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		label = "SELECT";
+		linux,code = <BTN_SELECT>;
+	};
+	/* note that TR2 and TL2 are swapped */
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw22 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "START";
+		linux,code = <BTN_START>;
+	};
+};
+
+&internal_display {
+	compatible = "elida,kd50t048a", "sitronix,st7701";
+	reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	IOVCC-supply = <&vcc_lcd>;
+	VCC-supply = <&vcc_lcd>;
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joystick {
+		mux_en_pins: mux-pins {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326.dtsi b/arch/arm64/boot/dts/rockchip/rk3326.dtsi
new file mode 100644
index 000000000..2ba6da125
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include "px30.dtsi"
+
+&display_subsystem {
+	ports = <&vopb_out>;
+};
+
+/delete-node/ &dsi_in_vopl;
+/delete-node/ &lvds_vopl_in;
+/delete-node/ &vopl;
+/delete-node/ &vopl_mmu;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
new file mode 100644
index 000000000..40bf80864
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (c) 2017-2019 Arm Ltd.
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Beelink A1";
+	compatible = "azw,beelink-a1", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	/*
+	 * UART pins, as viewed with bottom of case removed:
+	 *
+	 *           Front
+	 *        /-------
+	 *  L    / o <- Gnd
+	 *  e   / o <-- Rx
+	 *  f  / o <--- Tx
+	 *  t / o <---- +3.3v
+	 *    |
+	 */
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc_host_5v: usb3-current-switch {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_host_drv>;
+		regulator-name = "vcc_host_5v";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-beelink-gs1";
+	};
+};
+
+&analog_sound {
+	simple-audio-card,name = "Analog A/V";
+	status = "okay";
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211f>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,pbl = <0x4>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211f: ethernet-phy@0 {
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <1000000>;
+	i2c-scl-falling-time-ns = <5>;
+	i2c-scl-rising-time-ns = <83>;
+	status = "okay";
+
+	pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <0>;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_18: LDO_REG1 {
+				regulator-name = "vdd_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc_18emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_11: LDO_REG3 {
+				regulator-name = "vdd_11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vdd_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vdd_18>;
+	pmuio-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb3 {
+		usb30_host_drv: usb30-host-drv {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		bt_dis: bt-dis {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		chip_en: chip-en {
+			rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		wl_dis: wl-dis {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		wl_wake_host: wl-wake-host {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
new file mode 100644
index 000000000..ff6b466e0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Rockchip RK3328 EVB";
+	compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdio;
+		mmc2 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac2phy {
+	phy-supply = <&vcc_phy>;
+	clock_in_out = "output";
+	assigned-clock-rate = <50000000>;
+	assigned-clocks = <&cru SCLK_MAC2PHY>;
+	assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+		rockchip,pins =
+			<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	max-frequency = <150000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
new file mode 100644
index 000000000..16a1958e4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2c.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R2C Plus";
+	compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
+
+	aliases {
+		mmc1 = &emmc;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <150000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io_33>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
new file mode 100644
index 000000000..a07a26b94
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-nanopi-r2s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R2C";
+	compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
+};
+
+&gmac2io {
+	phy-handle = <&yt8521s>;
+	tx_delay = <0x22>;
+	rx_delay = <0x12>;
+
+	mdio {
+		/delete-node/ ethernet-phy@1;
+
+		yt8521s: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+
+			motorcomm,clk-out-frequency-hz = <125000000>;
+			motorcomm,keep-pll-enabled;
+			motorcomm,auto-sleep-disabled;
+
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
new file mode 100644
index 000000000..1445b879a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R2S";
+	compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+	aliases {
+		ethernet1 = &rtl8153;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clk: gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&reset_button_pin>;
+		pinctrl-names = "default";
+
+		key-reset {
+			label = "reset";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
+		pinctrl-names = "default";
+
+		lan_led: led-0 {
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:lan";
+		};
+
+		sys_led: led-1 {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:red:sys";
+			default-state = "on";
+		};
+
+		wan_led: led-2 {
+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+			label = "nanopi-r2s:green:wan";
+		};
+	};
+
+	vcc_io_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&sdio_vcc_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_io_sdio";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-settling-time-us = <5000>;
+		regulator-type = "voltage";
+		startup-delay-us = <2000>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io_33>;
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_5v_lan: vdd-5v-lan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lan_vdd_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vdd_5v_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "disabled";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io_33>;
+	pinctrl-0 = <&rgmiim1_pins>;
+	pinctrl-names = "default";
+	rx_delay = <0x18>;
+	snps,aal;
+	tx_delay = <0x24>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vdd_5v>;
+		vcc2-supply = <&vdd_5v>;
+		vcc3-supply = <&vdd_5v>;
+		vcc4-supply = <&vdd_5v>;
+		vcc5-supply = <&vcc_io_33>;
+		vcc6-supply = <&vdd_5v>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io_33: DCDC_REG4 {
+				regulator-name = "vcc_io_33";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io_33>;
+	vccio1-supply = <&vcc_io_33>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io_33>;
+	vccio6-supply = <&vcc_io_33>;
+	status = "okay";
+};
+
+&pinctrl {
+	button {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac2io {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lan {
+		lan_vdd_pin: lan-vdd-pin {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdio_vcc_pin: sdio-vcc-pin {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-names = "default";
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_io_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Second port is for USB 3.0 */
+	rtl8153: device@2 {
+		compatible = "usbbda,8153";
+		reg = <2>;
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
new file mode 100644
index 000000000..4237f2ee8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
+ * (http://www.orangepi.org)
+ *
+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3328-orangepi-r1-plus.dts"
+
+/ {
+	model = "Xunlong Orange Pi R1 Plus LTS";
+	compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
+};
+
+&gmac2io {
+	phy-handle = <&yt8531c>;
+	tx_delay = <0x19>;
+	rx_delay = <0x05>;
+
+	mdio {
+		/delete-node/ ethernet-phy@1;
+
+		yt8531c: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+
+			motorcomm,auto-sleep-disabled;
+			motorcomm,clk-out-frequency-hz = <125000000>;
+			motorcomm,keep-pll-enabled;
+			motorcomm,rx-clk-drv-microamp = <5020>;
+			motorcomm,rx-data-drv-microamp = <5020>;
+
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <15000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
new file mode 100644
index 000000000..dc83d7404
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Based on rk3328-nanopi-r2s.dts, which is:
+ *   Copyright (c) 2020 David Bauer <mail@david-bauer.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3328.dtsi"
+
+/ {
+	model = "Xunlong Orange Pi R1 Plus";
+	compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
+
+	aliases {
+		ethernet1 = &rtl8153;
+		mmc0 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clk: gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_5v_lan: vdd-5v-lan-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&lan_vdd_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vdd_5v_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+	status = "disabled";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io>;
+	pinctrl-0 = <&rgmiim1_pins>;
+	pinctrl-names = "default";
+	snps,aal;
+	rx_delay = <0x18>;
+	tx_delay = <0x24>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-0 = <&pmic_int_l>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io>;
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac2io {
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lan {
+		lan_vdd_pin: lan-vdd-pin {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Second port is for USB 3.0 */
+	rtl8153: device@2 {
+		compatible = "usbbda,8153";
+		reg = <2>;
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
new file mode 100644
index 000000000..5d5d95740
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Firefly roc-rk3328-cc";
+	compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-boot-on;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		regulator-name = "vcc_sdio";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host1_5v";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			label = "firefly:blue:power";
+			linux,default-trigger = "heartbeat";
+			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led: led-1 {
+			label = "firefly:yellow:user";
+			linux,default-trigger = "mmc1";
+			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <150000000>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,rxpbl = <0x4>;
+	snps,txpbl = <0x4>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&u2phy_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
new file mode 100644
index 000000000..e3e3984d0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "rk3328-roc-cc.dts"
+
+/ {
+	model = "Firefly ROC-RK3328-PC";
+	compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		/* This button is unpopulated out of the factory. */
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-khadas";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en>, <&wifi_host_wake>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmcio {
+		sdio_per_pin: sdio-per-pin {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wifi {
+		wifi_en: wifi-en {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake: wifi-host-wake {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_en: bt-en {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmic_int_l {
+	rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&rk805 {
+	interrupt-parent = <&gpio0>;
+	interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&usb20_host_drv {
+	rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&vcc_host1_5v {
+	gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc_sdio {
+	gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_per_pin>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
new file mode 100644
index 000000000..018a3a507
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org>
+ *
+ * Based on ./rk3328-rock64.dts, which is
+ *
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3328.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi E";
+	compatible = "radxa,rockpi-e", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		/* This button is unpopulated out of the factory. */
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-name = "vcc_sd";
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host_5v: vcc-host-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_host_drv>;
+		enable-active-high;
+		regulator-name = "vcc_host_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_wifi: vcc-wifi-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en>;
+		regulator-name = "vcc_wifi";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_io>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,aal;
+	snps,rxpbl = <0x4>;
+	snps,txpbl = <0x4>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			pinctrl-0 = <&eth_phy_int_pin>, <&eth_phy_reset_pin>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpio1>;
+			interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <50000>;
+			reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac2phy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	pmuio-supply = <&vcc_io>;
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	ephy {
+		eth_phy_int_pin: eth-phy-int-pin {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		eth_phy_reset_pin: eth-phy-reset-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		led_pin: led-pin {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb3 {
+		usb30_host_drv: usb30-host-drv {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_en: wifi-en {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+};
+
+&u2phy_host {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
new file mode 100644
index 000000000..0a27fa527
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 PINE64
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Pine64 Rock64";
+	compatible = "pine64,rock64", "rockchip,rk3328";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac_clkin";
+		#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0m1_pin>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	/* Common enable line for all of the rails mentioned in the labels */
+	vcc_host_5v: vcc_host1_5v: vcc_otg_5v: vcc-host-5v-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_led: led-0 {
+			gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		standby_led: led-1 {
+			gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&analog_sound {
+	status = "okay";
+};
+
+&codec {
+	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdmiphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: pmic@18 {
+		compatible = "rockchip,rk805";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk805-clkout2";
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vdd_arm: DCDC_REG2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <712500>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_18: LDO_REG1 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_emmc: LDO_REG2 {
+				regulator-name = "vcc18_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		usb20_host_drv: usb20-host-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* maximum speed for Rockchip SPI */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&u2phy {
+	status = "okay";
+
+	u2phy_host: host-port {
+		status = "okay";
+	};
+
+	u2phy_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&usb20_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
new file mode 100644
index 000000000..cc8209795
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -0,0 +1,1938 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3328-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3328-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3328";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		ethernet0 = &gmac2io;
+		ethernet1 = &gmac2phy;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			dynamic-power-coefficient = <120>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <40000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
+	analog_sound: analog-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "Analog";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <128>;
+		simple-audio-card,name = "HDMI";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+	};
+
+	i2s0: i2s@ff000000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff000000 0x0 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 11>, <&dmac 12>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff010000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff010000 0x0 0x1000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 14>, <&dmac 15>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff020000 {
+		compatible = "rockchip,rk3328-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff020000 0x0 0x1000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		dmas = <&dmac 0>, <&dmac 1>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@ff030000 {
+		compatible = "rockchip,rk3328-spdif";
+		reg = <0x0 0xff030000 0x0 0x1000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac 10>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm2_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pdm: pdm@ff040000 {
+		compatible = "rockchip,pdm";
+		reg = <0x0 0xff040000 0x0 0x1000>;
+		clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac 16>;
+		dma-names = "rx";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-1 = <&pdmm0_clk_sleep
+			     &pdmm0_sdi0_sleep
+			     &pdmm0_sdi1_sleep
+			     &pdmm0_sdi2_sleep
+			     &pdmm0_sdi3_sleep>;
+		status = "disabled";
+	};
+
+	grf: syscon@ff100000 {
+		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff100000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3328-io-voltage-domain";
+			status = "disabled";
+		};
+
+		grf_gpio: gpio {
+			compatible = "rockchip,rk3328-grf-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		power: power-controller {
+			compatible = "rockchip,rk3328-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-domain@RK3328_PD_HEVC {
+				reg = <RK3328_PD_HEVC>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3328_PD_VIDEO {
+				reg = <RK3328_PD_VIDEO>;
+				clocks = <&cru ACLK_RKVDEC>,
+					 <&cru HCLK_RKVDEC>,
+					 <&cru SCLK_VDEC_CABAC>,
+					 <&cru SCLK_VDEC_CORE>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3328_PD_VPU {
+				reg = <RK3328_PD_VPU>;
+				clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+				#power-domain-cells = <0>;
+			};
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x5c8>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	uart0: serial@ff110000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff110000 0x0 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 2>, <&dmac 3>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff120000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff120000 0x0 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 4>, <&dmac 5>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff130000 {
+		compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff130000 0x0 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac 6>, <&dmac 7>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2m1_xfer>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff150000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff160000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff170000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff180000 {
+		compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xff180000 0x0 0x1000>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff190000 {
+		compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff190000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac 8>, <&dmac 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@ff1a0000 {
+		compatible = "rockchip,rk3328-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff1a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_WDT>;
+	};
+
+	pwm0: pwm@ff1b0000 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff1b0010 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff1b0020 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff1b0030 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0030 0x0 0x10>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwmir_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	dmac: dma-controller@ff1f0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff1f0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+	};
+
+	tsadc: tsadc@ff250000 {
+		compatible = "rockchip,rk3328-tsadc";
+		reg = <0x0 0xff250000 0x0 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <100000>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	efuse: efuse@ff260000 {
+		compatible = "rockchip,rk3328-efuse";
+		reg = <0x0 0xff260000 0x0 0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru SCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+		rockchip,efuse-size = <0x20>;
+
+		/* Data cells */
+		efuse_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		logic_leakage: logic-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		efuse_cpu_version: cpu-version@1a {
+			reg = <0x1a 0x1>;
+			bits = <3 3>;
+		};
+	};
+
+	saradc: adc@ff280000 {
+		compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC_P>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	gpu: gpu@ff300000 {
+		compatible = "rockchip,rk3328-mali", "arm,mali-450";
+		reg = <0x0 0xff300000 0x0 0x30000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp",
+				  "gpmmu",
+				  "pp",
+				  "pp0",
+				  "ppmmu0",
+				  "pp1",
+				  "ppmmu1";
+		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
+		clock-names = "bus", "core";
+		resets = <&cru SRST_GPU_A>;
+	};
+
+	h265e_mmu: iommu@ff330200 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff330200 0 0x100>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_H265>, <&cru PCLK_H265>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vepu_mmu: iommu@ff340800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff340800 0x0 0x40>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff350000 {
+		compatible = "rockchip,rk3328-vpu";
+		reg = <0x0 0xff350000 0x0 0x800>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vdpu";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3328_PD_VPU>;
+	};
+
+	vpu_mmu: iommu@ff350800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff350800 0x0 0x40>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3328_PD_VPU>;
+	};
+
+	vdec: video-codec@ff360000 {
+		compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
+		reg = <0x0 0xff360000 0x0 0x480>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>,
+				  <&cru SCLK_VDEC_CORE>;
+		assigned-clock-rates = <400000000>, <400000000>, <300000000>;
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3328_PD_VIDEO>;
+	};
+
+	vdec_mmu: iommu@ff360480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3328_PD_VIDEO>;
+	};
+
+	vop: vop@ff370000 {
+		compatible = "rockchip,rk3328-vop";
+		reg = <0x0 0xff370000 0x0 0x3efc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@ff373f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff373f00 0x0 0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@ff3c0000 {
+		compatible = "rockchip,rk3328-dw-hdmi";
+		reg = <0x0 0xff3c0000 0x0 0x20000>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI>,
+			 <&cru SCLK_HDMI_SFC>,
+			 <&cru SCLK_RTC32K>;
+		clock-names = "iahb",
+			      "isfr",
+			      "cec";
+		phys = <&hdmiphy>;
+		phy-names = "hdmi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				hdmi_in_vop: endpoint {
+					remote-endpoint = <&vop_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	codec: codec@ff410000 {
+		compatible = "rockchip,rk3328-codec";
+		reg = <0x0 0xff410000 0x0 0x1000>;
+		clocks = <&cru PCLK_ACODECPHY>, <&cru SCLK_I2S1>;
+		clock-names = "pclk", "mclk";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmiphy: phy@ff430000 {
+		compatible = "rockchip,rk3328-hdmi-phy";
+		reg = <0x0 0xff430000 0x0 0x10000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+		clock-names = "sysclk", "refoclk", "refpclk";
+		clock-output-names = "hdmi_phy";
+		#clock-cells = <0>;
+		nvmem-cells = <&efuse_cpu_version>;
+		nvmem-cell-names = "cpu-version";
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@ff440000 {
+		compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
+		reg = <0x0 0xff440000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			/*
+			 * CPLL should run at 1200, but that is to high for
+			 * the initial dividers of most of its children.
+			 * We need set cpll child clk div first,
+			 * and then set the cpll frequency.
+			 */
+			<&cru DCLK_LCDC>, <&cru SCLK_PDM>,
+			<&cru SCLK_RTC32K>, <&cru SCLK_UART0>,
+			<&cru SCLK_UART1>, <&cru SCLK_UART2>,
+			<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>,
+			<&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>,
+			<&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>,
+			<&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>,
+			<&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>,
+			<&cru SCLK_SDIO>, <&cru SCLK_TSP>,
+			<&cru SCLK_WIFI>, <&cru ARMCLK>,
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>,
+			<&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+			<&cru HCLK_PERI>, <&cru PCLK_PERI>,
+			<&cru SCLK_RTC32K>;
+		assigned-clock-parents =
+			<&cru HDMIPHY>, <&cru PLL_APLL>,
+			<&cru PLL_GPLL>, <&xin24m>,
+			<&xin24m>, <&xin24m>;
+		assigned-clock-rates =
+			<0>, <61440000>,
+			<0>, <24000000>,
+			<24000000>, <24000000>,
+			<15000000>, <15000000>,
+			<100000000>, <100000000>,
+			<100000000>, <100000000>,
+			<50000000>, <100000000>,
+			<100000000>, <100000000>,
+			<50000000>, <50000000>,
+			<50000000>, <50000000>,
+			<24000000>, <600000000>,
+			<491520000>, <1200000000>,
+			<150000000>, <75000000>,
+			<75000000>, <150000000>,
+			<75000000>, <75000000>,
+			<32768>;
+	};
+
+	usb2phy_grf: syscon@ff450000 {
+		compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2phy@100 {
+			compatible = "rockchip,rk3328-usb2phy";
+			reg = <0x100 0x10>;
+			clocks = <&xin24m>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			status = "disabled";
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
+	sdmmc: mmc@ff500000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff500000 0x0 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	sdio: mmc@ff510000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff510000 0x0 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	emmc: mmc@ff520000 {
+		compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff520000 0x0 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		status = "disabled";
+	};
+
+	gmac2io: ethernet@ff540000 {
+		compatible = "rockchip,rk3328-gmac";
+		reg = <0x0 0xff540000 0x0 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>,
+			 <&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>,
+			 <&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>,
+			 <&cru PCLK_MAC2IO>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		resets = <&cru SRST_GMAC2IO_A>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+	};
+
+	gmac2phy: ethernet@ff550000 {
+		compatible = "rockchip,rk3328-gmac";
+		reg = <0x0 0xff550000 0x0 0x10000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC2PHY_SRC>, <&cru SCLK_MAC2PHY_RXTX>,
+			 <&cru SCLK_MAC2PHY_RXTX>, <&cru SCLK_MAC2PHY_REF>,
+			 <&cru ACLK_MAC2PHY>, <&cru PCLK_MAC2PHY>,
+			 <&cru SCLK_MAC2PHY_OUT>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "aclk_mac", "pclk_mac",
+			      "clk_macphy";
+		resets = <&cru SRST_GMAC2PHY_A>;
+		reset-names = "stmmaceth";
+		phy-mode = "rmii";
+		phy-handle = <&phy>;
+		snps,txpbl = <0x4>;
+		clock_in_out = "output";
+		status = "disabled";
+
+		mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy: ethernet-phy@0 {
+				compatible = "ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				clocks = <&cru SCLK_MAC2PHY_OUT>;
+				resets = <&cru SRST_MACPHY>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&fephyled_rxm1 &fephyled_linkm1>;
+				phy-is-integrated;
+			};
+		};
+	};
+
+	usb20_otg: usb@ff580000 {
+		compatible = "rockchip,rk3328-usb", "rockchip,rk3066-usb",
+			     "snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <280>;
+		g-tx-fifo-size = <256 128 128 64 32 16>;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff5c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@ff5d0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff5d0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>, <&u2phy>;
+		phys = <&u2phy_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbdrd3: usb@ff600000 {
+		compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+		reg = <0x0 0xff600000 0x0 0x100000>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+			 <&cru ACLK_USB3OTG>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		snps,dis-del-phy-power-chg-quirk;
+		snps,dis_enblslpm_quirk;
+		snps,dis-tx-ipgap-linecheck-quirk;
+		snps,dis-u2-freeclk-exists-quirk;
+		snps,dis_u2_susphy_quirk;
+		snps,dis_u3_susphy_quirk;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@ff811000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0xff811000 0 0x1000>,
+		      <0x0 0xff812000 0 0x2000>,
+		      <0x0 0xff814000 0 0x2000>,
+		      <0x0 0xff816000 0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	crypto: crypto@ff060000 {
+		compatible = "rockchip,rk3328-crypto";
+		reg = <0x0 0xff060000 0x0 0x4000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>,
+			 <&cru SCLK_CRYPTO>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3328-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff210000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff210000 0x0 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@ff220000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff220000 0x0 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@ff230000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff230000 0x0 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@ff240000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff240000 0x0 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+			bias-disable;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+			bias-disable;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+			bias-pull-up;
+			drive-strength = <12>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_high: pcfg-input-high {
+			bias-pull-up;
+			input-enable;
+		};
+
+		pcfg_input: pcfg-input {
+			input-enable;
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>,
+						<2 RK_PA5 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
+						<0 RK_PA6 2 &pcfg_pull_none>;
+			};
+			i2c3_pins: i2c3-pins {
+				rockchip,pins =
+					<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		hdmi_i2c {
+			hdmii2c_xfer: hdmii2c-xfer {
+				rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>,
+						<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pdm-0 {
+			pdmm0_clk: pdmm0-clk {
+				rockchip,pins = <2 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_fsync: pdmm0-fsync {
+				rockchip,pins = <2 RK_PC7 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi0: pdmm0-sdi0 {
+				rockchip,pins = <2 RK_PC3 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi1: pdmm0-sdi1 {
+				rockchip,pins = <2 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi2: pdmm0-sdi2 {
+				rockchip,pins = <2 RK_PC5 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_sdi3: pdmm0-sdi3 {
+				rockchip,pins = <2 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			pdmm0_clk_sleep: pdmm0-clk-sleep {
+				rockchip,pins =
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi0_sleep: pdmm0-sdi0-sleep {
+				rockchip,pins =
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi1_sleep: pdmm0-sdi1-sleep {
+				rockchip,pins =
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi2_sleep: pdmm0-sdi2-sleep {
+				rockchip,pins =
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_sdi3_sleep: pdmm0-sdi3-sleep {
+				rockchip,pins =
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+
+			pdmm0_fsync_sleep: pdmm0-fsync-sleep {
+				rockchip,pins =
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <1 RK_PB1 1 &pcfg_pull_none>,
+						<1 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts_pin: uart0-rts-pin {
+				rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <3 RK_PA4 4 &pcfg_pull_none>,
+						<3 RK_PA6 4 &pcfg_pull_up>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
+			};
+
+			uart1_rts_pin: uart1-rts-pin {
+				rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		uart2-0 {
+			uart2m0_xfer: uart2m0-xfer {
+				rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>,
+						<1 RK_PA1 2 &pcfg_pull_up>;
+			};
+		};
+
+		uart2-1 {
+			uart2m1_xfer: uart2m1-xfer {
+				rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
+						<2 RK_PA1 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-0 {
+			spi0m0_clk: spi0m0-clk {
+				rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_cs0: spi0m0-cs0 {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_tx: spi0m0-tx {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_rx: spi0m0-rx {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			spi0m0_cs1: spi0m0-cs1 {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-1 {
+			spi0m1_clk: spi0m1-clk {
+				rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_cs0: spi0m1-cs0 {
+				rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_tx: spi0m1-tx {
+				rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_rx: spi0m1-rx {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>;
+			};
+
+			spi0m1_cs1: spi0m1-cs1 {
+				rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi0-2 {
+			spi0m2_clk: spi0m2-clk {
+				rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>;
+			};
+
+			spi0m2_cs0: spi0m2-cs0 {
+				rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>;
+			};
+
+			spi0m2_tx: spi0m2-tx {
+				rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>;
+			};
+
+			spi0m2_rx: spi0m2-rx {
+				rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>;
+			};
+		};
+
+		i2s1 {
+			i2s1_mclk: i2s1-mclk {
+				rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sclk: i2s1-sclk {
+				rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			i2s1_lrckrx: i2s1-lrckrx {
+				rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>;
+			};
+
+			i2s1_lrcktx: i2s1-lrcktx {
+				rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdi: i2s1-sdi {
+				rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdo: i2s1-sdo {
+				rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio1: i2s1-sdio1 {
+				rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio2: i2s1-sdio2 {
+				rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sdio3: i2s1-sdio3 {
+				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			i2s1_sleep: i2s1-sleep {
+				rockchip,pins =
+					<2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+					<2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s2-0 {
+			i2s2m0_mclk: i2s2m0-mclk {
+				rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sclk: i2s2m0-sclk {
+				rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_lrckrx: i2s2m0-lrckrx {
+				rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_lrcktx: i2s2m0-lrcktx {
+				rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sdi: i2s2m0-sdi {
+				rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sdo: i2s2m0-sdo {
+				rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			i2s2m0_sleep: i2s2m0-sleep {
+				rockchip,pins =
+					<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>,
+					<1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		i2s2-1 {
+			i2s2m1_mclk: i2s2m1-mclk {
+				rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sclk: i2s2m1-sclk {
+				rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_lrckrx: i2sm1-lrckrx {
+				rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_lrcktx: i2s2m1-lrcktx {
+				rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sdi: i2s2m1-sdi {
+				rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sdo: i2s2m1-sdo {
+				rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>;
+			};
+
+			i2s2m1_sleep: i2s2m1-sleep {
+				rockchip,pins =
+					<1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>,
+					<3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>;
+			};
+		};
+
+		spdif-0 {
+			spdifm0_tx: spdifm0-tx {
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif-1 {
+			spdifm1_tx: spdifm1-tx {
+				rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		spdif-2 {
+			spdifm2_tx: spdifm2-tx {
+				rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc0-0 {
+			sdmmc0m0_pwren: sdmmc0m0-pwren {
+				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0m0_pin: sdmmc0m0-pin {
+				rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0-1 {
+			sdmmc0m1_pwren: sdmmc0m1-pwren {
+				rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0m1_pin: sdmmc0m1-pin {
+				rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0 {
+			sdmmc0_clk: sdmmc0-clk {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc0_cmd: sdmmc0-cmd {
+				rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_dectn: sdmmc0-dectn {
+				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0_wrprt: sdmmc0-wrprt {
+				rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0_bus1: sdmmc0-bus1 {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_bus4: sdmmc0-bus4 {
+				rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA1 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA2 1 &pcfg_pull_up_8ma>,
+						<1 RK_PA3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc0_pins: sdmmc0-pins {
+				rockchip,pins =
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc0ext {
+			sdmmc0ext_clk: sdmmc0ext-clk {
+				rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>;
+			};
+
+			sdmmc0ext_cmd: sdmmc0ext-cmd {
+				rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_wrprt: sdmmc0ext-wrprt {
+				rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_dectn: sdmmc0ext-dectn {
+				rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_bus1: sdmmc0ext-bus1 {
+				rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_bus4: sdmmc0ext-bus4 {
+				rockchip,pins =
+					<3 RK_PA4 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA5 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA6 3 &pcfg_pull_up_4ma>,
+					<3 RK_PA7 3 &pcfg_pull_up_4ma>;
+			};
+
+			sdmmc0ext_pins: sdmmc0ext-pins {
+				rockchip,pins =
+					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		sdmmc1 {
+			sdmmc1_clk: sdmmc1-clk {
+				rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>;
+			};
+
+			sdmmc1_cmd: sdmmc1-cmd {
+				rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_pwren: sdmmc1-pwren {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_wrprt: sdmmc1-wrprt {
+				rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_dectn: sdmmc1-dectn {
+				rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_bus1: sdmmc1-bus1 {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_bus4: sdmmc1-bus4 {
+				rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>,
+						<1 RK_PB7 1 &pcfg_pull_up_8ma>,
+						<1 RK_PC0 1 &pcfg_pull_up_8ma>,
+						<1 RK_PC1 1 &pcfg_pull_up_8ma>;
+			};
+
+			sdmmc1_pins: sdmmc1-pins {
+				rockchip,pins =
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+					<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_pwren: emmc-pwren {
+				rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>;
+			};
+
+			emmc_rstnout: emmc-rstnout {
+				rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins =
+					<0 RK_PA7 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD4 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD5 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD6 2 &pcfg_pull_up_12ma>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins =
+					<0 RK_PA7 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD4 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD5 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD6 2 &pcfg_pull_up_12ma>,
+					<2 RK_PD7 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC0 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC1 2 &pcfg_pull_up_12ma>,
+					<3 RK_PC2 2 &pcfg_pull_up_12ma>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwmir {
+			pwmir_pin: pwmir-pin {
+				rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>;
+			};
+		};
+
+		gmac-1 {
+			rgmiim1_pins: rgmiim1-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<1 RK_PB4 2 &pcfg_pull_none_8ma>,
+					/* mac_rxclk */
+					<1 RK_PB5 2 &pcfg_pull_none_4ma>,
+					/* mac_mdio */
+					<1 RK_PC3 2 &pcfg_pull_none_4ma>,
+					/* mac_txen */
+					<1 RK_PD1 2 &pcfg_pull_none_8ma>,
+					/* mac_clk */
+					<1 RK_PC5 2 &pcfg_pull_none_4ma>,
+					/* mac_rxdv */
+					<1 RK_PC6 2 &pcfg_pull_none_4ma>,
+					/* mac_mdc */
+					<1 RK_PC7 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd1 */
+					<1 RK_PB2 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd0 */
+					<1 RK_PB3 2 &pcfg_pull_none_4ma>,
+					/* mac_txd1 */
+					<1 RK_PB0 2 &pcfg_pull_none_8ma>,
+					/* mac_txd0 */
+					<1 RK_PB1 2 &pcfg_pull_none_8ma>,
+					/* mac_rxd3 */
+					<1 RK_PB6 2 &pcfg_pull_none_4ma>,
+					/* mac_rxd2 */
+					<1 RK_PB7 2 &pcfg_pull_none_4ma>,
+					/* mac_txd3 */
+					<1 RK_PC0 2 &pcfg_pull_none_8ma>,
+					/* mac_txd2 */
+					<1 RK_PC1 2 &pcfg_pull_none_8ma>,
+
+					/* mac_txclk */
+					<0 RK_PB0 1 &pcfg_pull_none_8ma>,
+					/* mac_txen */
+					<0 RK_PB4 1 &pcfg_pull_none_8ma>,
+					/* mac_clk */
+					<0 RK_PD0 1 &pcfg_pull_none_4ma>,
+					/* mac_txd1 */
+					<0 RK_PC0 1 &pcfg_pull_none_8ma>,
+					/* mac_txd0 */
+					<0 RK_PC1 1 &pcfg_pull_none_8ma>,
+					/* mac_txd3 */
+					<0 RK_PC7 1 &pcfg_pull_none_8ma>,
+					/* mac_txd2 */
+					<0 RK_PC6 1 &pcfg_pull_none_8ma>;
+			};
+
+			rmiim1_pins: rmiim1-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<1 RK_PC3 2 &pcfg_pull_none_2ma>,
+					/* mac_txen */
+					<1 RK_PD1 2 &pcfg_pull_none_12ma>,
+					/* mac_clk */
+					<1 RK_PC5 2 &pcfg_pull_none_2ma>,
+					/* mac_rxer */
+					<1 RK_PD0 2 &pcfg_pull_none_2ma>,
+					/* mac_rxdv */
+					<1 RK_PC6 2 &pcfg_pull_none_2ma>,
+					/* mac_mdc */
+					<1 RK_PC7 2 &pcfg_pull_none_2ma>,
+					/* mac_rxd1 */
+					<1 RK_PB2 2 &pcfg_pull_none_2ma>,
+					/* mac_rxd0 */
+					<1 RK_PB3 2 &pcfg_pull_none_2ma>,
+					/* mac_txd1 */
+					<1 RK_PB0 2 &pcfg_pull_none_12ma>,
+					/* mac_txd0 */
+					<1 RK_PB1 2 &pcfg_pull_none_12ma>,
+
+					/* mac_mdio */
+					<0 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<0 RK_PB4 1 &pcfg_pull_none>,
+					/* mac_clk */
+					<0 RK_PD0 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<0 RK_PC3 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<0 RK_PC0 1 &pcfg_pull_none>,
+					/* mac_txd0 */
+					<0 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		gmac2phy {
+			fephyled_speed10: fephyled-speed10 {
+				rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>;
+			};
+
+			fephyled_duplex: fephyled-duplex {
+				rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>;
+			};
+
+			fephyled_rxm1: fephyled-rxm1 {
+				rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			fephyled_txm1: fephyled-txm1 {
+				rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>;
+			};
+
+			fephyled_linkm1: fephyled-linkm1 {
+				rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc_pin {
+			tsadc_int: tsadc-int {
+				rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
+			};
+			tsadc_pin: tsadc-pin {
+				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+		hdmi_pin {
+			hdmi_cec: hdmi-cec {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+
+			hdmi_hpd: hdmi-hpd {
+				rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>;
+			};
+		};
+
+		cif-0 {
+			dvp_d2d9_m0:dvp-d2d9-m0 {
+				rockchip,pins =
+					/* cif_d0 */
+					<3 RK_PA4 2 &pcfg_pull_none>,
+					/* cif_d1 */
+					<3 RK_PA5 2 &pcfg_pull_none>,
+					/* cif_d2 */
+					<3 RK_PA6 2 &pcfg_pull_none>,
+					/* cif_d3 */
+					<3 RK_PA7 2 &pcfg_pull_none>,
+					/* cif_d4 */
+					<3 RK_PB0 2 &pcfg_pull_none>,
+					/* cif_d5m0 */
+					<3 RK_PB1 2 &pcfg_pull_none>,
+					/* cif_d6m0 */
+					<3 RK_PB2 2 &pcfg_pull_none>,
+					/* cif_d7m0 */
+					<3 RK_PB3 2 &pcfg_pull_none>,
+					/* cif_href */
+					<3 RK_PA1 2 &pcfg_pull_none>,
+					/* cif_vsync */
+					<3 RK_PA0 2 &pcfg_pull_none>,
+					/* cif_clkoutm0 */
+					<3 RK_PA3 2 &pcfg_pull_none>,
+					/* cif_clkin */
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif-1 {
+			dvp_d2d9_m1:dvp-d2d9-m1 {
+				rockchip,pins =
+					/* cif_d0 */
+					<3 RK_PA4 2 &pcfg_pull_none>,
+					/* cif_d1 */
+					<3 RK_PA5 2 &pcfg_pull_none>,
+					/* cif_d2 */
+					<3 RK_PA6 2 &pcfg_pull_none>,
+					/* cif_d3 */
+					<3 RK_PA7 2 &pcfg_pull_none>,
+					/* cif_d4 */
+					<3 RK_PB0 2 &pcfg_pull_none>,
+					/* cif_d5m1 */
+					<2 RK_PC0 4 &pcfg_pull_none>,
+					/* cif_d6m1 */
+					<2 RK_PC1 4 &pcfg_pull_none>,
+					/* cif_d7m1 */
+					<2 RK_PC2 4 &pcfg_pull_none>,
+					/* cif_href */
+					<3 RK_PA1 2 &pcfg_pull_none>,
+					/* cif_vsync */
+					<3 RK_PA0 2 &pcfg_pull_none>,
+					/* cif_clkoutm1 */
+					<2 RK_PB7 4 &pcfg_pull_none>,
+					/* cif_clkin */
+					<3 RK_PA2 2 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
new file mode 100644
index 000000000..160f2c7e9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ */
+
+/dts-v1/;
+#include "rk3368-evb.dtsi"
+
+/ {
+	model = "Rockchip RK3368 EVB with ACT8846 pmic";
+	compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
new file mode 100644
index 000000000..e47d1398a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3368.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
new file mode 100644
index 000000000..be06e6e64
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Andreas Färber
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GeekBox";
+	compatible = "geekbuying,geekbox", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		blue_led: led-0 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:blue:led";
+			default-state = "on";
+		};
+
+		red_led: led-1 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+			label = "geekbox:red:led";
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	non-removable;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+};
+
+&gmac {
+	status = "okay";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcc33_lcd: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33_lcd";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcca_18: LDO_REG4 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_18";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+			};
+
+			vcc_lan: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lan";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
new file mode 100644
index 000000000..cae01d35b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368-lion.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3368-uQ7 Baseboard";
+	compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	i2cmux2 {
+		i2c@0 {
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c01";
+				pagesize = <8>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
+
+		sd_card_led: led-3 {
+			label = "sd_card_led";
+			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <25000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi2 {
+	cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	/* alternate function of GPIO5/6 */
+	status = "disabled";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+				/* LID_BTN */
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BATLOW# */
+				<0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* SLP_BTN# */
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				/* BIOS_DISABLE# */
+				<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+				<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins =
+				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+				<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
new file mode 100644
index 000000000..5753e57fd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_gmac: gmac-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	i2cmux1 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c1>;
+		mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_GP0_I2C */
+		i2c_gp0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		/* Q7_SMB */
+		i2c_smb: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2cmux2 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+
+		/* Q7_LVDS_BLC_I2C */
+		i2c_lvds_blc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fan: fan@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				#cooling-cells = <2>;
+			};
+
+			rtc_twi: rtc@6f {
+				compatible = "isil,isl1208";
+				reg = <0x6f>;
+			};
+		};
+
+		/* Q7_GP2_I2C = LVDS_DID_CLK/DAT */
+		i2c_gp2: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pins>;
+
+		module_led1: led-1 {
+			label = "module_led1";
+			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+
+		module_led2: led-2 {
+			label = "module_led2";
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	clock-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc33_io>;
+	vqmmc-supply = <&vcc_18>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc33_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_io: DCDC_REG4 {
+				regulator-name = "vcc33_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc33_video: LDO_REG2 {
+				regulator-name = "vcc33_video";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd10_pll: LDO_REG3 {
+				regulator-name = "vdd10_pll";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd10_video: LDO_REG6 {
+				regulator-name = "vdd10_video";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_video: LDO_REG8 {
+				regulator-name = "vcc18_video";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+/* The RK3368-uQ7 "Lion" has most IO voltages hardwired to 3.3V. */
+&io_domains {
+	audio-supply = <&vcc33_io>;
+	dvp-supply = <&vcc33_io>;
+	flash0-supply = <&vcc_18>;
+	gpio30-supply = <&vcc33_io>;
+	gpio1830-supply = <&vcc33_io>;
+	sdcard-supply = <&vcc33_io>;
+	wifi-supply = <&vcc33_io>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		module_led_pins: module-led-pins {
+			rockchip,pins =
+				<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu-supply = <&vcc33_io>;
+	vop-supply = <&vcc33_io>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
new file mode 100644
index 000000000..81d1064fd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3368.dtsi"
+
+/ {
+	model = "Rockchip Orion R68";
+	compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		red_led: led-0 {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			label = "orion:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+			default-state = "on";
+		};
+
+		blue_led: led-1 {
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			label = "orion:blue:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&stby_pwren>;
+			default-state = "off";
+		};
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: vcc-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd";
+		gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: vcc-io-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	mmc-hs200-1_2v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PA6 1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PA7 1 &pcfg_pull_up_drv_8ma>,
+					<2 RK_PB0 1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
new file mode 100644
index 000000000..29df84b81
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip PX5 EVB";
+	compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x0 0x0 0x0 0x40000000>;
+		device_type = "memory";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	clock-frequency = <150000000>;
+	mmc-hs200-1_8v;
+	no-sdio;
+	no-sd;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			vdd_log: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd_log";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vcc18_flash: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_flash";
+			};
+
+			vcca_33: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_33";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			avdd_33: LDO_REG4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "avdd_33";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+			};
+
+			vcc33_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lcd";
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	gsl1680: touchscreen@40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&pinctrl {
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+		};
+
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdmmc {
+	status = "okay";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	no-sdio;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <0>; /* CRU */
+	rockchip,hw-tshut-polarity = <1>; /* high */
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
new file mode 100644
index 000000000..5589f3db6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ */
+
+/dts-v1/;
+#include "rk3368.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rockchip R88";
+	compatible = "rockchip,r88", "rockchip,rk3368";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &emmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		key-power {
+			wakeup-source;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		work_led: led-0 {
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			label = "r88:green:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_rst>, <&wifi_reg_on>;
+
+		reset-gpios =
+			/* BT_RST_N */
+			<&gpio3 RK_PA5 GPIO_ACTIVE_LOW>,
+
+			/* WL_REG_ON */
+			<&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_18: vcc18-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_io: vcc-io-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_wl: vccio-wl-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vdd_10: vdd-10-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_10";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <8000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		/* rtc_int is not connected */
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcc_io>;
+	gpio30-supply = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
+	wifi-supply = <&vccio_wl>;
+};
+
+&sdio0 {
+	assigned-clocks = <&cru SCLK_SDIO0>;
+	assigned-clock-parents = <&cru PLL_CPLL>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
+					<1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		stby_pwren: stby-pwren {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_ctl: led-ctl {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu-supply = <&vcc_io>;
+	vop-supply = <&vcc_io>;
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
new file mode 100644
index 000000000..a4c5aaf1f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -0,0 +1,1393 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <dt-bindings/clock/rk3368-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3368-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3368";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+				core2 {
+					cpu = <&cpu_b2>;
+				};
+				core3 {
+					cpu = <&cpu_b3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_l3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu_b3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu_l0>, <&cpu_l1>, <&cpu_l2>,
+				     <&cpu_l3>, <&cpu_b0>, <&cpu_b1>,
+				     <&cpu_b2>, <&cpu_b3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	sdmmc: mmc@ff0c0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0c0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_MMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdio0: mmc@ff0d0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0d0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
+			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	emmc: mmc@ff0f0000 {
+		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xff0f0000 0x0 0x4000>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		resets = <&cru SRST_EMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff120000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff130000 {
+		compatible = "rockchip,rk3368-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff140000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff170000 0x0 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1c0000 0x0 0x100>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	dmac_peri: dma-controller@ff250000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff250000 0x0 0x4000>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC_PERI>;
+		clock-names = "apb_pclk";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <115000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3368-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff290000 {
+		compatible = "rockchip,rk3368-gmac";
+		reg = <0x0 0xff290000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xff500000 0x0 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HOST0>;
+		status = "disabled";
+	};
+
+	usb_otg: usb@ff580000 {
+		compatible = "rockchip,rk3368-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x0 0xff580000 0x0 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		status = "disabled";
+	};
+
+	dmac_bus: dma-controller@ff600000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff600000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC_BUS>;
+		clock-names = "apb_pclk";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff650000 0x0 0x1000>;
+		clocks = <&cru PCLK_I2C0>;
+		clock-names = "i2c";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff660000 {
+		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
+		reg = <0x0 0xff660000 0x0 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680020 0x0 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff690000 0x0 0x100>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mbox: mbox@ff6b0000 {
+		compatible = "rockchip,rk3368-mailbox";
+		reg = <0x0 0xff6b0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MAILBOX>;
+		clock-names = "pclk_mailbox";
+		#mbox-cells = <1>;
+		status = "disabled";
+	};
+
+	pmu: power-management@ff730000 {
+		compatible = "rockchip,rk3368-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff730000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3368-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/*
+			 * Note: Although SCLK_* are the working clocks
+			 * of device without including on the NOC, needed for
+			 * synchronous reset.
+			 *
+			 * The clocks on the which NOC:
+			 * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+			 * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+			 * ACLK_RGA is on ACLK_RGA_NIU.
+			 * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+			 *
+			 * Which clock are device clocks:
+			 *	clocks		devices
+			 *	*_IEP		IEP:Image Enhancement Processor
+			 *	*_ISP		ISP:Image Signal Processing
+			 *	*_VIP		VIP:Video Input Processor
+			 *	*_VOP*		VOP:Visual Output Processor
+			 *	*_RGA		RGA
+			 *	*_EDP*		EDP
+			 *	*_DPHY*		LVDS
+			 *	*_HDMI		HDMI
+			 *	*_MIPI_*	MIPI
+			 */
+			power-domain@RK3368_PD_VIO {
+				reg = <RK3368_PD_VIO>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru ACLK_ISP>,
+					 <&cru ACLK_VIP>,
+					 <&cru ACLK_RGA>,
+					 <&cru ACLK_VOP>,
+					 <&cru ACLK_VOP_IEP>,
+					 <&cru DCLK_VOP>,
+					 <&cru HCLK_IEP>,
+					 <&cru HCLK_ISP>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VIP>,
+					 <&cru HCLK_VOP>,
+					 <&cru HCLK_VIO_HDCPMMU>,
+					 <&cru PCLK_EDP_CTRL>,
+					 <&cru PCLK_HDMI_CTRL>,
+					 <&cru PCLK_HDCP>,
+					 <&cru PCLK_ISP>,
+					 <&cru PCLK_VIP>,
+					 <&cru PCLK_DPHYRX>,
+					 <&cru PCLK_DPHYTX0>,
+					 <&cru PCLK_MIPI_CSI>,
+					 <&cru PCLK_MIPI_DSI0>,
+					 <&cru SCLK_VOP0_PWM>,
+					 <&cru SCLK_EDP_24M>,
+					 <&cru SCLK_EDP>,
+					 <&cru SCLK_HDCP>,
+					 <&cru SCLK_ISP>,
+					 <&cru SCLK_RGA>,
+					 <&cru SCLK_HDMI_CEC>,
+					 <&cru SCLK_HDMI_HDCP>;
+				pm_qos = <&qos_iep>,
+					 <&qos_isp_r0>,
+					 <&qos_isp_r1>,
+					 <&qos_isp_w0>,
+					 <&qos_isp_w1>,
+					 <&qos_vip>,
+					 <&qos_vop>,
+					 <&qos_rga_r>,
+					 <&qos_rga_w>;
+				#power-domain-cells = <0>;
+			};
+
+			/*
+			 * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+			 * (video endecoder & decoder) clocks that on the
+			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+			 */
+			power-domain@RK3368_PD_VIDEO {
+				reg = <RK3368_PD_VIDEO>;
+				clocks = <&cru ACLK_VIDEO>,
+					 <&cru HCLK_VIDEO>,
+					 <&cru SCLK_HEVC_CABAC>,
+					 <&cru SCLK_HEVC_CORE>;
+				pm_qos = <&qos_hevc_r>,
+					 <&qos_vpu_r>,
+					 <&qos_vpu_w>;
+				#power-domain-cells = <0>;
+			};
+
+			/*
+			 * Note: ACLK_GPU is the GPU clock,
+			 * and on the ACLK_GPU_NIU (NOC).
+			 */
+			power-domain@RK3368_PD_GPU_1 {
+				reg = <RK3368_PD_GPU_1>;
+				clocks = <&cru ACLK_GPU_CFG>,
+					 <&cru ACLK_GPU_MEM>,
+					 <&cru SCLK_GPU_CORE>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	pmugrf: syscon@ff738000 {
+		compatible = "rockchip,rk3368-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff738000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3368-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x200>;
+			mode-normal = <BOOT_NORMAL>;
+			mode-recovery = <BOOT_RECOVERY>;
+			mode-bootloader = <BOOT_FASTBOOT>;
+			mode-loader = <BOOT_BL_DOWNLOAD>;
+		};
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3368-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3368-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x1000>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3368-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3368-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff800000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	timer0: timer@ff810000 {
+		compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff810000 0x0 0x20>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
+	spdif: spdif@ff880000 {
+		compatible = "rockchip,rk3368-spdif";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		clock-names = "mclk", "hclk";
+		dmas = <&dmac_bus 3>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
+	i2s_2ch: i2s-2ch@ff890000 {
+		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>;
+		dmas = <&dmac_bus 6>, <&dmac_bus 7>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2s_8ch: i2s-8ch@ff898000 {
+		compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff898000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S_8CH>, <&cru HCLK_I2S_8CH>;
+		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_8ch_bus>;
+		status = "disabled";
+	};
+
+	iep_mmu: iommu@ff900800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff900800 0x0 0x100>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3368_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>,
+		      <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3368_PD_VIO>;
+		rockchip,disable-mmu-reset;
+		status = "disabled";
+	};
+
+	vop_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff930300 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3368_PD_VIO>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hevc_mmu: iommu@ff9a0440 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0440 0x0 0x40>,
+		      <0x0 0xff9a0480 0x0 0x40>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vpu_mmu: iommu@ff9a0800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff9a0800 0x0 0x100>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	qos_iep: qos@ffad0000 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_isp_r0: qos@ffad0080 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0080 0x0 0x20>;
+	};
+
+	qos_isp_r1: qos@ffad0100 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0100 0x0 0x20>;
+	};
+
+	qos_isp_w0: qos@ffad0180 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0180 0x0 0x20>;
+	};
+
+	qos_isp_w1: qos@ffad0200 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0200 0x0 0x20>;
+	};
+
+	qos_vip: qos@ffad0280 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0280 0x0 0x20>;
+	};
+
+	qos_vop: qos@ffad0300 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0300 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffad0380 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0380 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffad0400 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffad0400 0x0 0x20>;
+	};
+
+	qos_hevc_r: qos@ffae0000 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	qos_vpu_r: qos@ffae0100 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffae0100 0x0 0x20>;
+	};
+
+	qos_vpu_w: qos@ffae0180 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffae0180 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffaf0000 {
+		compatible = "rockchip,rk3368-qos", "syscon";
+		reg = <0x0 0xffaf0000 0x0 0x20>;
+	};
+
+	efuse256: efuse@ffb00000 {
+		compatible = "rockchip,rk3368-efuse";
+		reg = <0x0 0xffb00000 0x0 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		temp_adjust: temp-adjust@1f {
+			reg = <0x1f 0x1>;
+		};
+	};
+
+	gic: interrupt-controller@ffb71000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x0 0xffb71000 0x0 0x1000>,
+		      <0x0 0xffb72000 0x0 0x2000>,
+		      <0x0 0xffb74000 0x0 0x2000>,
+		      <0x0 0xffb76000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+		      (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3368-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <0x2>;
+		#size-cells = <0x2>;
+		ranges;
+
+		gpio0: gpio@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff750000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO0>;
+			interrupts = <GIC_SPI 0x51 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio1: gpio@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO1>;
+			interrupts = <GIC_SPI 0x52 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio2: gpio@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO2>;
+			interrupts = <GIC_SPI 0x53 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio3: gpio@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff7a0000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3>;
+			interrupts = <GIC_SPI 0x54 IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <1 RK_PD3 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_up>,
+						<1 RK_PC4 2 &pcfg_pull_up>,
+						<1 RK_PC5 2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up>,
+						<1 RK_PC3 2 &pcfg_pull_up>,
+						<1 RK_PC4 2 &pcfg_pull_up>,
+						<1 RK_PC5 2 &pcfg_pull_up>,
+						<1 RK_PC6 2 &pcfg_pull_up>,
+						<1 RK_PC7 2 &pcfg_pull_up>,
+						<1 RK_PD0 2 &pcfg_pull_up>,
+						<1 RK_PD1 2 &pcfg_pull_up>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+						<3 RK_PD0 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PB0 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB1 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB2 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB6 1 &pcfg_pull_none_12ma>,
+						<3 RK_PD4 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB5 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB7 1 &pcfg_pull_none>,
+						<3 RK_PC0 1 &pcfg_pull_none>,
+						<3 RK_PC1 1 &pcfg_pull_none>,
+						<3 RK_PC2 1 &pcfg_pull_none>,
+						<3 RK_PD1 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <3 RK_PC6 1 &pcfg_pull_none>,
+						<3 RK_PD0 1 &pcfg_pull_none>,
+						<3 RK_PC3 1 &pcfg_pull_none>,
+						<3 RK_PB0 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB1 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB5 1 &pcfg_pull_none_12ma>,
+						<3 RK_PB7 1 &pcfg_pull_none>,
+						<3 RK_PC0 1 &pcfg_pull_none>,
+						<3 RK_PC4 1 &pcfg_pull_none>,
+						<3 RK_PC5 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
+						<0 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>,
+						<2 RK_PC6 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <0 RK_PB1 2 &pcfg_pull_none>,
+						<3 RK_PD7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>,
+						<1 RK_PC1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <3 RK_PD0 2 &pcfg_pull_none>,
+						<3 RK_PD1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <3 RK_PD2 2 &pcfg_pull_none>,
+						<3 RK_PD3 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_8ch_bus: i2s-8ch-bus {
+				rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>,
+						<2 RK_PB5 1 &pcfg_pull_none>,
+						<2 RK_PB6 1 &pcfg_pull_none>,
+						<2 RK_PB7 1 &pcfg_pull_none>,
+						<2 RK_PC0 1 &pcfg_pull_none>,
+						<2 RK_PC1 1 &pcfg_pull_none>,
+						<2 RK_PC2 1 &pcfg_pull_none>,
+						<2 RK_PC3 1 &pcfg_pull_none>,
+						<2 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 RK_PD5 3 &pcfg_pull_none>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins = <2 RK_PD4 1 &pcfg_pull_up>,
+						<2 RK_PD5 1 &pcfg_pull_up>,
+						<2 RK_PD6 1 &pcfg_pull_up>,
+						<2 RK_PD7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins = <3 RK_PA0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins = <3 RK_PA2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins = <3 RK_PA4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins = <3 RK_PA5 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins = <3 RK_PA6 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up>,
+						<2 RK_PA6 1 &pcfg_pull_up>,
+						<2 RK_PA7 1 &pcfg_pull_up>,
+						<2 RK_PB0 1 &pcfg_pull_up>;
+			};
+		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <1 RK_PD5 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <1 RK_PD0 3 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <1 RK_PD1 3 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <1 RK_PC7 3 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <1 RK_PC6 3 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <1 RK_PB6 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <1 RK_PB7 2 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <3 RK_PD4 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <1 RK_PC0 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <1 RK_PC1 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins = <0 RK_PB4 2 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <0 RK_PB5 2 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins = <0 RK_PB2 2 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins = <0 RK_PB3 2 &pcfg_pull_up>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up>,
+						<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 RK_PD2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <0 RK_PC4 3 &pcfg_pull_up>,
+						<0 RK_PC5 3 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <0 RK_PC6 3 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <0 RK_PC7 3 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <2 RK_PA6 2 &pcfg_pull_up>,
+						<2 RK_PA5 2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <3 RK_PD5 2 &pcfg_pull_up>,
+						<3 RK_PD6 3 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <3 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <0 RK_PD3 3 &pcfg_pull_up>,
+						<0 RK_PD2 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <0 RK_PD0 3 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <0 RK_PD1 3 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
new file mode 100644
index 000000000..6464ef4d1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts
@@ -0,0 +1,939 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "OPEN AI LAB EAIDK-610";
+	compatible = "openailab,eaidk-610", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&user_led_pin>,
+			    <&heartbeat_led_pin>, <&wlan_active_led_pin>,
+			    <&bt_active_led_pin>;
+
+		work_led: led-0 {
+			label = "blue:work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		user_led: led-1 {
+			label = "read:user";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat_led: led-2 {
+			label = "green:heartbeat";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan_active_led: led-3 {
+			label = "yellow:wlan";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led: led-4 {
+			label = "blue:bt";
+			gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+	rt5651-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "realtek,rt5651-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5651>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	/* For USB3.0 Port1/2 */
+	vcc5v0_host1: vcc5v0-host1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host1_en>;
+		regulator-name = "vcc5v0_host1";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* For USB2.0 Port1/2 */
+	vcc5v0_host3: vcc5v0-host3-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-name = "vcc5v0_host3";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG2 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5651: audio-codec@1a {
+		compatible = "rockchip,rt5651";
+		reg = <0x1a>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
+		spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usbc0_role_sw: endpoint@0 {
+					remote-endpoint = <&dwc3_0_role_switch>;
+				};
+			};
+		};
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint = <&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint = <&tcphy0_typec_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led_pin: user-led-pin {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		heartbeat_led_pin: heartbeat-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_active_led_pin: wlan-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_active_led_pin: bt-led-pin {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rt5651 {
+		rt5651_hpcon: rt5640-hpcon {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host1_en: vcc5v0-host1-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module AMPAK AP6255 */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_usb3 {
+	orientation-switch;
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host3>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host3>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	usb-role-switch;
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
new file mode 100644
index 000000000..3d1e126b5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+	model = "Rockchip RK3399 Evaluation Board";
+	compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vdd_center: vdd-center {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 25000 0>;
+		regulator-name = "vdd_center";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+};
+
+&edp {
+	status = "okay";
+	force-hpd;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "disabled";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "disabled";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
new file mode 100644
index 000000000..1ce85a581
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+	model = "96boards RK3399 Ficus";
+	compatible = "vamrs,ficus", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
+
+		user_led1: led-1 {
+			label = "red:user1";
+			gpios = <&gpio4 25 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2: led-2 {
+			label = "red:user2";
+			gpios = <&gpio4 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3: led-3 {
+			label = "red:user3";
+			gpios = <&gpio4 30 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4: led-4 {
+			label = "red:user4";
+			gpios = <&gpio1 0 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led: led-5 {
+			label = "red:wlan";
+			gpios = <&gpio1 1 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led: led-6 {
+			label = "red:bt";
+			gpios = <&gpio1 4 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_sys>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led1_pin: user-led1-pin {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2_pin: user-led2-pin {
+			rockchip,pins =
+				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3_pin: user-led3-pin {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4_pin: user-led4-pin {
+			rockchip,pins =
+				<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins =
+				<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led_pin: bt-led-pin {
+			rockchip,pins =
+				<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi1 {
+	/* On both Low speed and High speed expansion */
+	cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+	gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
new file mode 100644
index 000000000..c5db64f3e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -0,0 +1,943 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly-RK3399 Board";
+	compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm0 0 25000 0>;
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+
+		work_led: led-0 {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy_led: led-1 {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	rt5640-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rockchip,rt5640-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5640>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <430000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG2 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <0>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5640: rt5640@1c {
+		compatible = "realtek,rt5640";
+		reg = <0x1c>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		realtek,in1-differential;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rt5640_hpcon>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+			};
+		};
+	};
+
+	accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_3g_drv: pcie-3g-drv {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	rt5640 {
+		rt5640_hpcon: rt5640-hpcon {
+			rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+
+	/* Power supply */
+	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
+	vmmc-supply = <&vcc_sdio>;	/* card's power */
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdif_bus_1>;
+	status = "okay";
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
new file mode 100644
index 000000000..0f9cc042d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Bob Rev 4+ board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+
+/ {
+	model = "Google Bob";
+	compatible = "google,bob-rev13", "google,bob-rev12",
+		     "google,bob-rev11", "google,bob-rev10",
+		     "google,bob-rev9", "google,bob-rev8",
+		     "google,bob-rev7", "google,bob-rev6",
+		     "google,bob-rev5", "google,bob-rev4",
+		     "google,bob", "google,gru", "rockchip,rk3399";
+	chassis-type = "convertible";
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv101wxmn51";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ap_i2c_tp {
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		wakeup-source;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&spi0 {
+	status = "okay";
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		spi-max-frequency = <800000>;
+	};
+};
+
+&pinctrl {
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&wlan_host_wake_l {
+	/* Kevin has an external pull up, but Bob does not. */
+	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
new file mode 100644
index 000000000..cacbad35c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Chromebook shared properties
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/ {
+	pp900_ap: pp900-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_ap";
+
+		/* EC turns on w/ pp900_ap_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* EC turns on w/ pp900_usb_en */
+	pp900_usb: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pcie_en */
+	pp900_pcie: pp900-ap {
+	};
+
+	pp3000: pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3000_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_centerlogic_pwm";
+
+		pwms = <&pwm3 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+	};
+
+	ppvar_centerlogic: ppvar-centerlogic {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_centerlogic";
+
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+
+		ctrl-supply = <&ppvar_centerlogic_pwm>;
+		ctrl-voltage-range = <799434 1049925>;
+
+		regulator-settling-time-up-us = <378>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	/* Schematics call this PPVAR even though it's fixed */
+	ppvar_logic: ppvar-logic {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_logic";
+
+		/* EC turns on w/ ppvar_logic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_audio: pp1800-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_audio_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* gpio is shared with pp3300_wifi_bt */
+	pp1800_pcie: pp1800-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_pcie";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_pd_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
+		 * This has been approximated as 8ms total.
+		 */
+		regulator-enable-ramp-delay = <8000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* Always on; plain and simple */
+	pp3000_ap: pp3000_emmc: pp3000 {
+	};
+
+	pp1500_ap_io: pp1500-ap-io {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1500_ap_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1500_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	pp3300_disp: pp3300-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_disp_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <2000>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on w/ pp3300_usb_en_l */
+	pp3300_usb: pp3300 {
+	};
+
+	/* gpio is shared with pp1800_pcie and pinctrl is set there */
+	pp3300_wifi_bt: pp3300-wifi-bt {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wifi_bt";
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3300>;
+	};
+
+	/*
+	 * This is a bit of a hack. The WiFi module should be reset at least
+	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
+	 * With some stretching of the imagination, we can call the 1.8V
+	 * regulator a supply.
+	 */
+	wlan_pd_n: wlan-pd-n {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
+
+		enable-active-high;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp1800_pcie>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		power-supply = <&pp3300_disp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+
+		wake_on_bt: key-wake-on-bt {
+			label = "Wake-on-Bluetooth";
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+};
+
+&ppvar_bigcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_litcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_gpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
+};
+
+&dmc {
+	center-supply = <&ppvar_centerlogic>;
+	rockchip,pd-idle-dis-freq-hz = <800000000>;
+	rockchip,sr-idle-dis-freq-hz = <800000000>;
+	rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
+};
+
+&edp {
+	status = "okay";
+
+	/*
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
+	 */
+	assigned-clocks = <&cru PCLK_EDP>;
+	assigned-clock-rates = <24000000>;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A 0-7 */
+			  "AP_RTC_CLK_IN",
+			  "EC_AP_INT_L",
+			  "PP1800_AUDIO_EN",
+			  "BT_HOST_WAKE_L",
+			  "WLAN_MODULE_PD_L",
+			  "H1_INT_OD_L",
+			  "CENTERLOGIC_DVS_PWM",
+			  "",
+
+			  /* GPIO0 B 0-4 */
+			  "WIFI_HOST_WAKE_L",
+			  "PMUIO2_33_18_L",
+			  "PP1500_EN",
+			  "AP_EC_WARM_RESET_REQ",
+			  "PP3000_EN";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A 0-7 */
+			  "",
+			  "",
+			  "SPK_PA_EN",
+			  "",
+			  "TRACKPAD_INT_L",
+			  "AP_EC_S3_S0_L",
+			  "AP_EC_OVERTEMP",
+			  "AP_SPI_FLASH_MISO",
+
+			  /* GPIO1 B 0-7 */
+			  "AP_SPI_FLASH_MOSI_R",
+			  "AP_SPI_FLASH_CLK_R",
+			  "AP_SPI_FLASH_CS_L_R",
+			  "WLAN_MODULE_RESET_L",
+			  "WIFI_DISABLE_L",
+			  "MIC_INT",
+			  "",
+			  "AP_I2C_DVS_SDA",
+
+			  /* GPIO1 C 0-7 */
+			  "AP_I2C_DVS_SCL",
+			  "AP_BL_EN",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics call it
+			   * AP_FW_WP or CPU1_FW_WP, depending on the variant.
+			   */
+			  "AP_FLASH_WP",
+			  "LITCPU_DVS_PWM",
+			  "AP_I2C_AUDIO_SDA",
+			  "AP_I2C_AUDIO_SCL",
+			  "",
+			  "HEADSET_INT_L";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A 0-7 */
+			  "",
+			  "",
+			  "SD_IO_PWR_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO2 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO2 C 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SPI_EC_MISO",
+			  "AP_SPI_EC_MOSI",
+			  "AP_SPI_EC_CLK",
+			  "AP_SPI_EC_CS_L",
+
+			  /* GPIO2 D 0-4 */
+			  "BT_DEV_WAKE_L",
+			  "",
+			  "WIFI_PCIE_CLKREQ_L",
+			  "WIFI_PERST_L",
+			  "SD_PWR_3000_1800_L";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "AP_SPI_TPM_MISO",
+			  "AP_SPI_TPM_MOSI_R",
+			  "AP_SPI_TPM_CLK_R",
+			  "AP_SPI_TPM_CS_L_R",
+
+			  /* GPIO3 B 0-7 */
+			  "EC_IN_RW",
+			  "",
+			  "AP_I2C_TP_SDA",
+			  "AP_I2C_TP_SCL",
+			  "AP_I2C_TP_PU_EN",
+			  "TOUCH_INT_L",
+			  "",
+			  "",
+
+			  /* GPIO3 C 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 D 0-7 */
+			  "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI_0",
+			  "I2S0_SDI_1",
+			  "",
+			  "I2S0_SDO_1",
+			  "I2S0_SDO_0";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A 0-7 */
+			  "I2S_MCLK",
+			  "AP_I2C_MIC_SDA",
+			  "AP_I2C_MIC_SCL",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 C 0-7 */
+			  "AP_I2C_TS_SDA",
+			  "AP_I2C_TS_SCL",
+			  "GPU_DVS_PWM",
+			  "UART_DBG_TX_AP_RX",
+			  "UART_AP_TX_DBG_RX",
+			  "",
+			  "BIGCPU_DVS_PWM",
+			  "EDP_HPD_3V0",
+
+			  /* GPIO4 D 0-5 */
+			  "SD_CARD_DET_L",
+			  "USB_DP_HPD",
+			  "TOUCH_RESET_L",
+			  "PP3300_DISP_EN",
+			  "",
+			  "SD_SLOT_PWR_EN";
+};
+
+ap_i2c_mic: &i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	headsetcodec: rt5514@57 {
+		compatible = "realtek,rt5514";
+		reg = <0x57>;
+		realtek,dmic-init-delay-ms = <20>;
+	};
+};
+
+ap_i2c_tp: &i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/*
+	 * Note strange pullup enable.  Apparently this avoids leakage but
+	 * still allows us to get nice 4.7K pullups for high speed i2c
+	 * transfers.  Basically we want the pullup on whenever the ap is
+	 * alive, so the "en" pin just gets set to output high.
+	 */
+	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
+};
+
+&cros_ec {
+	cros_ec_pwm: pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+	};
+
+	usbc_extcon1: extcon1 {
+		compatible = "google,extcon-usbc-cros-ec";
+		google,usb-port-id = <1>;
+	};
+};
+
+&sound {
+	rockchip,codec = <&max98357a &headsetcodec
+			  &codec &wacky_spi_audio &cdn_dp>;
+};
+
+&spi2 {
+	wacky_spi_audio: spi2@0 {
+		compatible = "realtek,rt5514";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_int>;
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+		wakeup-source;
+	};
+};
+
+&pci_rootport {
+	mvl_wifi: wifi@0,0 {
+		compatible = "pci1b4b,2b42";
+		reg = <0x0000 0x0 0x0 0x0 0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake_l>;
+		wakeup-source;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pinctrl {
+	discrete-regulators {
+		pp1500_en: pp1500-en {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp1800_audio_en: pp1800-audio-en {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+
+		pp3000_en: pp3000-en {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp3300_disp_en: pp3300-disp-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		wlan_module_pd_l: wlan-module-pd-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+	};
+};
+
+&wifi {
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		/* Kevin has an external pull up, but Bob does not */
+		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
new file mode 100644
index 000000000..2cc9b3386
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Kevin Rev 6+ board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/*
+ * Kevin-specific things
+ *
+ * Things in this section should use names from Kevin schematic since no
+ * equivalent exists in Gru schematic.  If referring to signals that exist
+ * in Gru we use the Gru names, though.  Confusing enough for you?
+ */
+/ {
+	model = "Google Kevin";
+	compatible = "google,kevin-rev15", "google,kevin-rev14",
+		     "google,kevin-rev13", "google,kevin-rev12",
+		     "google,kevin-rev11", "google,kevin-rev10",
+		     "google,kevin-rev9", "google,kevin-rev8",
+		     "google,kevin-rev7", "google,kevin-rev6",
+		     "google,kevin", "google,gru", "rockchip,rk3399";
+	chassis-type = "convertible";
+
+	/* Power tree */
+
+	p3_3v_dig: p3-3v-dig {
+		compatible = "regulator-fixed";
+		regulator-name = "p3.3v_dig";
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu3_pen_pwr_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "sharp,lq123p1jx31";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		panel-timing {
+			clock-frequency = <266666667>;
+			hactive = <2400>;
+			hfront-porch = <48>;
+			hback-porch = <84>;
+			hsync-len = <32>;
+			hsync-active = <0>;
+			vactive = <1600>;
+			vfront-porch = <3>;
+			vback-porch = <120>;
+			vsync-len = <10>;
+			vsync-active = <0>;
+		};
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <25500>;
+		pulldown-ohm = <0>;
+		io-channels = <&saradc 2>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <25500>;
+		pulldown-ohm = <0>;
+		io-channels = <&saradc 3>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 1>;
+};
+
+&gpio_keys {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
+
+	switch-pen-insert {
+		label = "Pen Insert";
+		/* Insert = low, eject = high */
+		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		linux,code = <SW_PEN_INSERTED>;
+		linux,input-type = <EV_SW>;
+		wakeup-source;
+	};
+};
+
+&thermal_zones {
+	bigcpu_reg_thermal: bigcpu-reg-thermal {
+		polling-delay-passive = <100>; /* milliseconds */
+		polling-delay = <1000>; /* milliseconds */
+		thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
+		sustainable-power = <4000>;
+
+		ppvar_bigcpu_trips: trips {
+			ppvar_bigcpu_on: ppvar-bigcpu-on {
+				temperature = <40000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_bigcpu_alert: ppvar-bigcpu-alert {
+				temperature = <50000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_bigcpu_crit: ppvar-bigcpu-crit {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <0>;	/* millicelsius */
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&ppvar_bigcpu_alert>;
+				cooling-device =
+					<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <4096>;
+			};
+			map1 {
+				trip = <&ppvar_bigcpu_alert>;
+				cooling-device =
+					<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				contribution = <1024>;
+			};
+		};
+	};
+
+	litcpu_reg_thermal: litcpu-reg-thermal {
+		polling-delay-passive = <100>; /* milliseconds */
+		polling-delay = <1000>; /* milliseconds */
+		thermal-sensors = <&thermistor_ppvar_litcpu 0>;
+		sustainable-power = <4000>;
+
+		ppvar_litcpu_trips: trips {
+			ppvar_litcpu_on: ppvar-litcpu-on {
+				temperature = <40000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_litcpu_alert: ppvar-litcpu-alert {
+				temperature = <50000>;	/* millicelsius */
+				hysteresis = <2000>;	/* millicelsius */
+				type = "passive";
+			};
+
+			ppvar_litcpu_crit: ppvar-litcpu-crit {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <0>;	/* millicelsius */
+				type = "critical";
+			};
+		};
+	};
+};
+
+ap_i2c_tpm: &i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+		powered-while-suspended;
+	};
+};
+
+ap_i2c_dig: &i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	digitizer: digitizer@9 {
+		/* wacom,w9013 */
+		compatible = "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
+
+		vdd-supply = <&p3_3v_dig>;
+		post-power-on-delay-ms = <100>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+/* Adjustments to things in the gru baseboard */
+
+&ap_i2c_tp {
+	trackpad@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     BTN_LEFT>;
+		wakeup-source;
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ppvar_bigcpu_pwm {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+};
+
+&ppvar_bigcpu {
+	regulator-min-microvolt = <798674>;
+	regulator-max-microvolt = <1302172>;
+	ctrl-voltage-range = <798674 1302172>;
+};
+
+&ppvar_litcpu_pwm {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+};
+
+&ppvar_litcpu {
+	regulator-min-microvolt = <799065>;
+	regulator-max-microvolt = <1303738>;
+	ctrl-voltage-range = <799065 1303738>;
+};
+
+&ppvar_gpu_pwm {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+};
+
+&ppvar_gpu {
+	regulator-min-microvolt = <785782>;
+	regulator-max-microvolt = <1217729>;
+	ctrl-voltage-range = <785782 1217729>;
+};
+
+&ppvar_centerlogic_pwm {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+};
+
+&ppvar_centerlogic {
+	regulator-min-microvolt = <800069>;
+	regulator-max-microvolt = <1049692>;
+	ctrl-voltage-range = <800069 1049692>;
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&pp1800_ap_io>;
+};
+
+&mvl_wifi {
+	marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
+};
+
+&pinctrl {
+	digitizer {
+		/* Has external pullup */
+		cpu1_dig_irq_l: cpu1-dig-irq-l {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		/* Has external pullup */
+		cpu1_dig_pdct_l: cpu1-dig-pdct-l {
+			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	discrete-regulators {
+		cpu3_pen_pwr_en: cpu3-pen-pwr-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		cpu1_pen_eject: cpu1-pen-eject {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
new file mode 100644
index 000000000..9e4b12ed6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev5+ (SKU-0) board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+	model = "Google Scarlet";
+	compatible = "google,scarlet-rev15-sku0", "google,scarlet-rev15",
+		     "google,scarlet-rev14-sku0", "google,scarlet-rev14",
+		     "google,scarlet-rev13-sku0", "google,scarlet-rev13",
+		     "google,scarlet-rev12-sku0", "google,scarlet-rev12",
+		     "google,scarlet-rev11-sku0", "google,scarlet-rev11",
+		     "google,scarlet-rev10-sku0", "google,scarlet-rev10",
+		     "google,scarlet-rev9-sku0",  "google,scarlet-rev9",
+		     "google,scarlet-rev8-sku0",  "google,scarlet-rev8",
+		     "google,scarlet-rev7-sku0",  "google,scarlet-rev7",
+		     "google,scarlet-rev6-sku0",  "google,scarlet-rev6",
+		     "google,scarlet-rev5-sku0",  "google,scarlet-rev5",
+		     "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+	compatible = "innolux,p097pfg";
+	avdd-supply = <&ppvarp_lcd>;
+	avee-supply = <&ppvarn_lcd>;
+};
+
+&pci_rootport {
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0x00000000 0x0 0x00000000 0x0 0x00000000>,
+		      <0x03000010 0x0 0x00000000 0x0 0x00200000>;
+		qcom,ath10k-calibration-variant = "GO_DUMO";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts
new file mode 100644
index 000000000..5d1879033
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev4+ (SKU-6/Innolux) board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+	model = "Google Scarlet";
+	compatible = "google,scarlet-rev15-sku2", "google,scarlet-rev15-sku4",
+		     "google,scarlet-rev15-sku6", "google,scarlet-rev15",
+		     "google,scarlet-rev14-sku2", "google,scarlet-rev14-sku4",
+		     "google,scarlet-rev14-sku6", "google,scarlet-rev14",
+		     "google,scarlet-rev13-sku2", "google,scarlet-rev13-sku4",
+		     "google,scarlet-rev13-sku6", "google,scarlet-rev13",
+		     "google,scarlet-rev12-sku2", "google,scarlet-rev12-sku4",
+		     "google,scarlet-rev12-sku6", "google,scarlet-rev12",
+		     "google,scarlet-rev11-sku2", "google,scarlet-rev11-sku4",
+		     "google,scarlet-rev11-sku6", "google,scarlet-rev11",
+		     "google,scarlet-rev10-sku2", "google,scarlet-rev10-sku4",
+		     "google,scarlet-rev10-sku6", "google,scarlet-rev10",
+		     "google,scarlet-rev9-sku2",  "google,scarlet-rev9-sku4",
+		     "google,scarlet-rev9-sku6",  "google,scarlet-rev9",
+		     "google,scarlet-rev8-sku2",  "google,scarlet-rev8-sku4",
+		     "google,scarlet-rev8-sku6",  "google,scarlet-rev8",
+		     "google,scarlet-rev7-sku2",  "google,scarlet-rev7-sku4",
+		     "google,scarlet-rev7-sku6",  "google,scarlet-rev7",
+		     "google,scarlet-rev6-sku2",  "google,scarlet-rev6-sku4",
+		     "google,scarlet-rev6-sku6",  "google,scarlet-rev6",
+		     "google,scarlet-rev5-sku2",  "google,scarlet-rev5-sku4",
+		     "google,scarlet-rev5-sku6",  "google,scarlet-rev5",
+		     "google,scarlet-rev4-sku2",  "google,scarlet-rev4-sku4",
+		     "google,scarlet-rev4-sku6",  "google,scarlet-rev4",
+		     "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+	compatible = "innolux,p097pfg";
+	avdd-supply = <&ppvarp_lcd>;
+	avee-supply = <&ppvarn_lcd>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts
new file mode 100644
index 000000000..bd7592217
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Scarlet Rev3+ (SKU-7/Kingdisplay) board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+
+#include "rk3399-gru-scarlet.dtsi"
+
+/ {
+	model = "Google Scarlet";
+	compatible = "google,scarlet-rev15-sku7", "google,scarlet-rev15",
+		     "google,scarlet-rev14-sku7", "google,scarlet-rev14",
+		     "google,scarlet-rev13-sku7", "google,scarlet-rev13",
+		     "google,scarlet-rev12-sku7", "google,scarlet-rev12",
+		     "google,scarlet-rev11-sku7", "google,scarlet-rev11",
+		     "google,scarlet-rev10-sku7", "google,scarlet-rev10",
+		     "google,scarlet-rev9-sku7",  "google,scarlet-rev9",
+		     "google,scarlet-rev8-sku7",  "google,scarlet-rev8",
+		     "google,scarlet-rev7-sku7",  "google,scarlet-rev7",
+		     "google,scarlet-rev6-sku7",  "google,scarlet-rev6",
+		     "google,scarlet-rev5-sku7",  "google,scarlet-rev5",
+		     "google,scarlet-rev4-sku7",  "google,scarlet-rev4",
+		     "google,scarlet-rev3-sku7",  "google,scarlet-rev3",
+		     "google,scarlet", "google,gru", "rockchip,rk3399";
+};
+
+&mipi_panel {
+	compatible = "kingdisplay,kd097d04";
+	power-supply = <&pp3300_s0>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
new file mode 100644
index 000000000..c5e7de60c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -0,0 +1,891 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-scarlet board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/{
+	chassis-type = "tablet";
+
+	/* Power tree */
+
+	/* ppvar_sys children, sorted by name */
+	pp1250_s3: pp1250-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1250_s3";
+
+		/* EC turns on w/ pp1250_s3_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1250000>;
+		regulator-max-microvolt = <1250000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1250_cam: pp1250-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1250_dvdd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1250_cam_en>;
+
+		enable-active-high;
+		gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+
+		/* 740us delay from gpio output high to pp1250 stable,
+		 * rounding up to 1ms for safety.
+		 */
+		startup-delay-us = <1000>;
+		vin-supply = <&pp1250_s3>;
+	};
+
+	pp900_s0: pp900-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_s0";
+
+		/* EC turns on w/ pp900_s0_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* pp1800 children, sorted by name */
+	pp900_s3: pp900-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_s3";
+
+		/* EC turns on w/ pp900_s3_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* EC turns on pp1800_s3_en */
+	pp1800_s3: pp1800 {
+	};
+
+	/* pp3300 children, sorted by name */
+	pp2800_cam: pp2800-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_avdd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp2800_cam_en>;
+
+		enable-active-high;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on pp3300_s0_en */
+	pp3300_s0: pp3300 {
+	};
+
+	/* EC turns on pp3300_s3_en */
+	pp3300_s3: pp3300 {
+	};
+
+	/*
+	 * See b/66922012
+	 *
+	 * This is a hack to make sure the Bluetooth part of the QCA6174A
+	 * is reset at boot by toggling BT_EN. At boot BT_EN is first set
+	 * to low when the bt_3v3 regulator is registered (in disabled
+	 * state). The fake regulator is configured as a supply of the
+	 * wlan_3v3 regulator below. When wlan_3v3 is enabled early in
+	 * the boot process it also enables its supply regulator bt_3v3,
+	 * which changes BT_EN to high.
+	 */
+	bt_3v3: bt-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "bt_3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_1v8_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&pp3300_s3>;
+	};
+
+	wlan_3v3: wlan-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_3v3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pd_1v8_l>;
+
+		/*
+		 * The WL_EN pin is driven low when the regulator is
+		 * registered, and transitions to high when the PCIe bus
+		 * is powered up.
+		 */
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Require minimum 10ms from power-on (e.g., PD#) to init PCIe.
+		 * TODO (b/64444991): how long to assert PD#?
+		 */
+		regulator-enable-ramp-delay = <10000>;
+		/* See bt_3v3 hack above */
+		vin-supply = <&bt_3v3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm1 0 1000000 0>;
+	};
+
+	dmic: dmic {
+		compatible = "dmic-codec";
+		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dmic_en>;
+		wakeup-delay-ms = <250>;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_eject_odl>;
+
+		switch-pen-insert {
+			label = "Pen Insert";
+			/* Insert = low, eject = high */
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+};
+
+/* pp900_s0 aliases */
+pp900_ddrpll_ap: &pp900_s0 {
+};
+pp900_pcie: &pp900_s0 {
+};
+pp900_usb: &pp900_s0 {
+};
+
+/* pp900_s3 aliases */
+pp900_emmcpll: &pp900_s3 {
+};
+
+/* EC turns on; alias for pp1800_s0 */
+pp1800_pcie: &pp1800_s0 {
+};
+
+/* On scarlet PPVAR(big_cpu, lit_cpu, gpu) need to adjust voltage ranges */
+&ppvar_bigcpu {
+	ctrl-voltage-range = <800074 1299226>;
+	regulator-min-microvolt = <800074>;
+	regulator-max-microvolt = <1299226>;
+};
+
+&ppvar_bigcpu_pwm {
+	/* On scarlet ppvar big cpu use pwm3 */
+	pwms = <&pwm3 0 3337 0>;
+	regulator-min-microvolt = <800074>;
+	regulator-max-microvolt = <1299226>;
+};
+
+&ppvar_litcpu {
+	ctrl-voltage-range = <802122 1199620>;
+	regulator-min-microvolt = <802122>;
+	regulator-max-microvolt = <1199620>;
+};
+
+&ppvar_litcpu_pwm {
+	regulator-min-microvolt = <802122>;
+	regulator-max-microvolt = <1199620>;
+};
+
+&ppvar_gpu {
+	ctrl-voltage-range = <799600 1099600>;
+	regulator-min-microvolt = <799600>;
+	regulator-max-microvolt = <1099600>;
+};
+
+&ppvar_gpu_pwm {
+	regulator-min-microvolt = <799600>;
+	regulator-max-microvolt = <1099600>;
+};
+
+&ppvar_sd_card_io {
+	states = <1800000 0x0>, <3300000 0x1>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&pp3000_sd_slot {
+	vin-supply = <&pp3300>;
+};
+
+ap_i2c_dig: &i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times. */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	digitizer: digitizer@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x9>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_int_odl &pen_reset_l>;
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+camera: &i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times; TODO: measure */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/* 24M mclk is shared between world and user cameras */
+	pinctrl-0 = <&i2c7_xfer &test_clkout1>;
+
+	/* Rear-facing camera */
+	wcam: camera@36 {
+		compatible = "ovti,ov5695";
+		reg = <0x36>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcam_rst>;
+
+		clocks = <&cru SCLK_TESTCLKOUT1>;
+		clock-names = "xvclk";
+
+		avdd-supply = <&pp2800_cam>;
+		dvdd-supply = <&pp1250_cam>;
+		dovdd-supply = <&pp1800_s0>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+		port {
+			wcam_out: endpoint {
+				remote-endpoint = <&mipi_in_wcam>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	/* Front-facing camera */
+	ucam: camera@3c {
+		compatible = "ovti,ov2685";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ucam_rst>;
+
+		clocks = <&cru SCLK_TESTCLKOUT1>;
+		clock-names = "xvclk";
+
+		avdd-supply = <&pp2800_cam>;
+		dovdd-supply = <&pp1800_s0>;
+		dvdd-supply = <&pp1800_s0>;
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>;
+	phys = <&tcphy0_dp>;
+};
+
+&cpu_alert0 {
+	temperature = <66000>;
+};
+
+&cpu_alert1 {
+	temperature = <71000>;
+};
+
+&cros_ec {
+	interrupt-parent = <&gpio1>;
+	interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&cru {
+	assigned-clocks =
+		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+		<&cru PLL_NPLL>,
+		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+		<&cru PCLK_PERIHP>,
+		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+		<&cru ACLK_VIO>,
+		<&cru ACLK_GIC_PRE>,
+		<&cru PCLK_DDR>,
+		<&cru ACLK_HDCP>,
+		<&cru ACLK_VDU>;
+	assigned-clock-rates =
+		<600000000>, <1600000000>,
+		<1000000000>,
+		<150000000>, <75000000>,
+		<37500000>,
+		<100000000>, <100000000>,
+		<50000000>, <800000000>,
+		<100000000>, <50000000>,
+		<400000000>,
+		<200000000>,
+		<200000000>,
+		<400000000>,
+		<400000000>;
+};
+
+/* The center supply is fixed to .9V on scarlet */
+&dmc {
+	center-supply = <&pp900_s0>;
+};
+
+/* We don't need .925 V for 928 MHz on scarlet */
+&dmc_opp_table {
+	opp03 {
+		opp-microvolt = <900000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A 0-7 */
+			  "CLK_32K_AP",
+			  "EC_IN_RW_OD",
+			  "SPK_PA_EN",
+			  "WLAN_PERST_1V8_L",
+			  "WLAN_PD_1V8_L",
+			  "WLAN_RF_KILL_1V8_L",
+			  "BIGCPU_DVS_PWM",
+			  "SD_CD_L_JTAG_EN",
+
+			  /* GPIO0 B 0-5 */
+			  "BT_EN_BT_RF_KILL_1V8_L",
+			  "PMUIO2_33_18_L_PP3300_S0_EN",
+			  "TOUCH_RESET_L",
+			  "AP_EC_WARM_RESET_REQ",
+			  "PEN_RESET_L",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics call
+			   * it AP_FLASH_WP_R_ODL.
+			   */
+			  "AP_FLASH_WP_L";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A 0-7 */
+			  "PEN_INT_ODL",
+			  "PEN_EJECT_ODL",
+			  "BT_HOST_WAKE_1V8_L",
+			  "WLAN_HOST_WAKE_1V8_L",
+			  "TOUCH_INT_ODL",
+			  "AP_EC_S3_S0_L",
+			  "AP_EC_OVERTEMP",
+			  "AP_SPI_FLASH_MISO",
+
+			  /* GPIO1 B 0-7 */
+			  "AP_SPI_FLASH_MOSI_R",
+			  "AP_SPI_FLASH_CLK_R",
+			  "AP_SPI_FLASH_CS_L_R",
+			  "SD_CARD_DET_ODL",
+			  "",
+			  "AP_EXPANSION_IO1",
+			  "AP_EXPANSION_IO2",
+			  "AP_I2C_DISP_SDA",
+
+			  /* GPIO1 C 0-7 */
+			  "AP_I2C_DISP_SCL",
+			  "H1_INT_ODL",
+			  "EC_AP_INT_ODL",
+			  "LITCPU_DVS_PWM",
+			  "AP_I2C_AUDIO_SDA",
+			  "AP_I2C_AUDIO_SCL",
+			  "AP_EXPANSION_IO3",
+			  "HEADSET_INT_ODL",
+
+			  /* GPIO1 D0 */
+			  "AP_EXPANSION_IO4";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A 0-7 */
+			  "AP_I2C_PEN_SDA",
+			  "AP_I2C_PEN_SCL",
+			  "SD_IO_PWR_EN",
+			  "UCAM_RST_L",
+			  "PP1250_CAM_EN",
+			  "WCAM_RST_L",
+			  "AP_EXPANSION_IO5",
+			  "AP_I2C_CAM_SDA",
+
+			  /* GPIO2 B 0-7 */
+			  "AP_I2C_CAM_SCL",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+			  "AP_H1_SPI_CLK",
+			  "AP_H1_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO2 C 0-7 */
+			  "UART_EXPANSION_TX_AP_RX",
+			  "UART_AP_TX_EXPANSION_RX",
+			  "UART_EXPANSION_RTS_AP_CTS",
+			  "UART_AP_RTS_EXPANSION_CTS",
+			  "AP_SPI_EC_MISO",
+			  "AP_SPI_EC_MOSI",
+			  "AP_SPI_EC_CLK",
+			  "AP_SPI_EC_CS_L",
+
+			  /* GPIO2 D 0-4 */
+			  "PP2800_CAM_EN",
+			  "CLK_24M_CAM",
+			  "WLAN_PCIE_CLKREQ_1V8_L",
+			  "",
+			  "SD_PWR_3000_1800_L";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 C 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO3 D 0-7 */
+			  "I2S0_SCLK",
+			  "I2S0_LRCK_RX",
+			  "I2S0_LRCK_TX",
+			  "I2S0_SDI_0",
+			  "STRAP_LCDBIAS_L",
+			  "STRAP_FEATURE_1",
+			  "STRAP_FEATURE_2",
+			  "I2S0_SDO_0";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A 0-7 */
+			  "I2S_MCLK",
+			  "AP_I2C_EXPANSION_SDA",
+			  "AP_I2C_EXPANSION_SCL",
+			  "DMIC_EN",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 B 0-7 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  /* GPIO4 C 0-7 */
+			  "AP_I2C_TS_SDA",
+			  "AP_I2C_TS_SCL",
+			  "GPU_DVS_PWM",
+			  "UART_DBG_TX_AP_RX",
+			  "UART_AP_TX_DBG_RX",
+			  "BL_EN",
+			  "BL_PWM",
+			  "",
+
+			  /* GPIO4 D 0-5 */
+			  "",
+			  "DISPLAY_RST_L",
+			  "",
+			  "PPVARP_LCD_EN",
+			  "PPVARN_LCD_EN",
+			  "SD_SLOT_PWR_EN";
+};
+
+&i2c_tunnel {
+	google,remote-bus = <0>;
+};
+
+&io_domains {
+	bt656-supply = <&pp1800_s0>;		/* APIO2_VDD;  2a 2b */
+	audio-supply = <&pp1800_s0>;		/* APIO5_VDD;  3d 4a */
+	gpio1830-supply = <&pp1800_s0>;		/* APIO4_VDD;  4c 4d */
+};
+
+&isp0 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_wcam: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&wcam_out>;
+				data-lanes = <1 2>;
+			};
+
+			mipi_in_ucam: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&ucam_out>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&isp0_mmu {
+	status = "okay";
+};
+
+&max98357a {
+	sdmode-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+};
+
+&mipi_dphy_rx0 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		/* 2 different panels are used, compatibles are in dts files */
+		reg = <0>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_rst_l>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				mipi1_in_panel: endpoint@1 {
+					remote-endpoint = <&mipi1_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&mipi_dsi1 {
+	status = "okay";
+
+	ports {
+		mipi1_out: port@1 {
+			reg = <1>;
+
+			mipi1_out_panel: endpoint {
+				remote-endpoint = <&mipi1_in_panel>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+
+	/* PERST# asserted in S3 */
+	pcie-reset-suspend = <1>;
+
+	vpcie3v3-supply = <&wlan_3v3>;
+	vpcie1v8-supply = <&pp1800_pcie>;
+};
+
+&sdmmc {
+	cd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	rockchip,codec = <&max98357a &dmic &codec &cdn_dp>;
+};
+
+&spi2 {
+	status = "okay";
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		spi-max-frequency = <800000>;
+	};
+};
+
+&usb_host0_ohci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	qca_bt: bluetooth@1 {
+		compatible = "usbcf3,e300", "usb4ca,301a";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "wakeup";
+	};
+};
+
+/* PINCTRL OVERRIDES */
+&ap_fw_wp {
+	rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&bl_en {
+	rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&bt_host_wake_l {
+	rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+};
+
+&ec_ap_int_l {
+	rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&headset_int_l {
+	rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&i2s0_8ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD1 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD2 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD3 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD7 1 &pcfg_pull_none_6ma>,
+		<4 RK_PA0 1 &pcfg_pull_none_6ma>;
+};
+
+&i2s0_8ch_bus_bclk_off {
+	rockchip,pins =
+		<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>,
+		<3 RK_PD1 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD2 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD3 1 &pcfg_pull_none_6ma>,
+		<3 RK_PD7 1 &pcfg_pull_none_6ma>,
+		<4 RK_PA0 1 &pcfg_pull_none_6ma>;
+};
+
+/* there is no external pull up, so need to set this pin pull up */
+&sdmmc_cd_pin {
+	rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&sd_pwr_1800_sel {
+	rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+};
+
+&sdmode_en {
+	rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&touch_reset_l {
+	rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&touch_int_l {
+	rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+};
+
+&pinctrl {
+	pinctrl-0 = <
+		&ap_pwroff	/* AP will auto-assert this when in S3 */
+		&clk_32k	/* This pin is always 32k on gru boards */
+		&wlan_rf_kill_1v8_l
+	>;
+
+	pcfg_pull_none_6ma: pcfg-pull-none-6ma {
+		bias-disable;
+		drive-strength = <6>;
+	};
+
+	camera {
+		pp1250_cam_en: pp1250-dvdd {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pp2800_cam_en: pp2800-avdd {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ucam_rst: ucam_rst {
+			rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wcam_rst: wcam_rst {
+			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	digitizer {
+		pen_int_odl: pen-int-odl {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pen_reset_l: pen-reset-l {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	discrete-regulators {
+		display_rst_l: display-rst-l {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		ppvarp_lcd_en: ppvarp-lcd-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ppvarn_lcd_en: ppvarn-lcd-en {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	dmic {
+		dmic_en: dmic-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		pen_eject_odl: pen-eject-odl {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&wifi {
+	bt_en_1v8_l: bt-en-1v8-l {
+		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_pd_1v8_l: wlan-pd-1v8-l {
+		rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	/* Default pull-up, but just to be clear */
+	wlan_rf_kill_1v8_l: wlan-rf-kill-1v8-l {
+		rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
new file mode 100644
index 000000000..789fd0dcc
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -0,0 +1,865 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru (and derivatives) board device tree source
+ *
+ * Copyright 2016-2017 Google, Inc
+ */
+
+#include <dt-bindings/input/input.h>
+#include "rk3399.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	/*
+	 * Power Tree
+	 *
+	 * In general an attempt is made to include all rails called out by
+	 * the schematic as long as those rails interact in some way with
+	 * the AP.  AKA:
+	 * - Rails that only connect to the EC (or devices that the EC talks to)
+	 *   are not included.
+	 * - Rails _are_ included if the rails go to the AP even if the AP
+	 *   doesn't currently care about them / they are always on.  The idea
+	 *   here is that it makes it easier to map to the schematic or extend
+	 *   later.
+	 *
+	 * If two rails are substantially the same from the AP's point of
+	 * view, though, we won't create a full fixed regulator.  We'll just
+	 * put the child rail as an alias of the parent rail.  Sometimes rails
+	 * look the same to the AP because one of these is true:
+	 * - The EC controls the enable and the EC always enables a rail as
+	 *   long as the AP is running.
+	 * - The rails are actually connected to each other by a jumper and
+	 *   the distinction is just there to add clarity/flexibility to the
+	 *   schematic.
+	 */
+
+	ppvar_sys: ppvar-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pp1200_lpddr: pp1200-lpddr {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_lpddr";
+
+		/* EC turns on w/ lpddr_pwr_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800: pp1800 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800";
+
+		/* Always on when ppvar_sys shows power good */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300: pp3300 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300";
+
+		/* Always on; plain and simple */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000: pp5000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000";
+
+		/* EC turns on w/ pp5000_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_bigcpu_pwm";
+
+		pwms = <&pwm1 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+	};
+
+	ppvar_bigcpu: ppvar-bigcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_bigcpu";
+
+		regulator-min-microvolt = <800107>;
+		regulator-max-microvolt = <1302232>;
+
+		ctrl-supply = <&ppvar_bigcpu_pwm>;
+		ctrl-voltage-range = <800107 1302232>;
+
+		regulator-settling-time-up-us = <322>;
+	};
+
+	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_litcpu_pwm";
+
+		pwms = <&pwm2 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+	};
+
+	ppvar_litcpu: ppvar-litcpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_litcpu";
+
+		regulator-min-microvolt = <797743>;
+		regulator-max-microvolt = <1307837>;
+
+		ctrl-supply = <&ppvar_litcpu_pwm>;
+		ctrl-voltage-range = <797743 1307837>;
+
+		regulator-settling-time-up-us = <384>;
+	};
+
+	ppvar_gpu_pwm: ppvar-gpu-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_gpu_pwm";
+
+		pwms = <&pwm0 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ap_core_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+	};
+
+	ppvar_gpu: ppvar-gpu {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_gpu";
+
+		regulator-min-microvolt = <786384>;
+		regulator-max-microvolt = <1217747>;
+
+		ctrl-supply = <&ppvar_gpu_pwm>;
+		ctrl-voltage-range = <786384 1217747>;
+
+		regulator-settling-time-up-us = <390>;
+	};
+
+	/* EC turns on w/ pp900_ddrpll_en */
+	pp900_ddrpll: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pll_en */
+	pp900_pll: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pmu_en */
+	pp900_pmu: pp900-ap {
+	};
+
+	/* EC turns on w/ pp1800_s0_en_l */
+	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_avdd_en_l */
+	pp1800_avdd: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_lid_en_l */
+	pp1800_lid: pp1800_mic: pp1800 {
+	};
+
+	/* EC turns on w/ lpddr_pwr_en */
+	pp1800_lpddr: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_pmu_en_l */
+	pp1800_pmu: pp1800 {
+	};
+
+	/* EC turns on w/ pp1800_usb_en_l */
+	pp1800_usb: pp1800 {
+	};
+
+	pp3000_sd_slot: pp3000-sd-slot {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000_sd_slot";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_slot_pwr_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3000>;
+	};
+
+	/*
+	 * Technically, this is a small abuse of 'regulator-gpio'; this
+	 * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
+	 * always on though, so it is sufficient to simply control the mux
+	 * here.
+	 */
+	ppvar_sd_card_io: ppvar-sd-card-io {
+		compatible = "regulator-gpio";
+		regulator-name = "ppvar_sd_card_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
+
+		enable-active-high;
+		enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3000000 0x0>;
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	/* EC turns on w/ pp3300_trackpad_en_l */
+	pp3300_trackpad: pp3300-trackpad {
+	};
+
+	/* EC turns on w/ usb_a_en */
+	pp5000_usb_a_vbus: pp5000 {
+	};
+
+	ap_rtc_clk: ap-rtc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+	max98357a: max98357a {
+		compatible = "maxim,max98357a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmode_en>;
+		sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		sdmode-delay = <2>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+
+	sound: sound {
+		compatible = "rockchip,rk3399-gru-sound";
+		rockchip,cpu = <&i2s0 &spdif>;
+	};
+};
+
+&cdn_dp {
+	status = "okay";
+};
+
+/*
+ * Set some suspend operating points to avoid OVP in suspend
+ *
+ * When we go into S3 ARM Trusted Firmware will transition our PWM regulators
+ * from wherever they're at back to the "default" operating point (whatever
+ * voltage we get when we set the PWM pins to "input").
+ *
+ * This quick transition under light load has the possibility to trigger the
+ * regulator "over voltage protection" (OVP).
+ *
+ * To make extra certain that we don't hit this OVP at suspend time, we'll
+ * transition to a voltage that's much closer to the default (~1.0 V) so that
+ * there will not be a big jump.  Technically we only need to get within 200 mV
+ * of the default voltage, but the speed here should be fast enough and we need
+ * suspend/resume to be rock solid.
+ */
+
+&cluster0_opp {
+	opp05 {
+		opp-suspend;
+	};
+};
+
+&cluster1_opp {
+	opp06 {
+		opp-suspend;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&ppvar_litcpu>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&ppvar_bigcpu>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&ppvar_bigcpu>;
+};
+
+
+&cru {
+	assigned-clocks =
+		<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+		<&cru PLL_NPLL>,
+		<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+		<&cru PCLK_PERIHP>,
+		<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+		<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+		<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+		<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+		<&cru ACLK_GIC_PRE>,
+		<&cru PCLK_DDR>;
+	assigned-clock-rates =
+		<600000000>, <800000000>,
+		<1000000000>,
+		<150000000>, <75000000>,
+		<37500000>,
+		<100000000>, <100000000>,
+		<50000000>, <800000000>,
+		<100000000>, <50000000>,
+		<400000000>, <400000000>,
+		<200000000>,
+		<200000000>;
+};
+
+&dfi {
+	status = "okay";
+};
+
+&dmc {
+	status = "okay";
+
+	rockchip,pd-idle-ns = <160>;
+	rockchip,sr-idle-ns = <10240>;
+	rockchip,sr-mc-gate-idle-ns = <40960>;
+	rockchip,srpd-lite-idle-ns = <61440>;
+	rockchip,standby-idle-ns = <81920>;
+
+	rockchip,ddr3_odt_dis_freq = <666000000>;
+	rockchip,lpddr3_odt_dis_freq = <666000000>;
+	rockchip,lpddr4_odt_dis_freq = <666000000>;
+
+	rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+	rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+	rockchip,standby-idle-dis-freq-hz = <928000000>;
+};
+
+&dmc_opp_table {
+	opp03 {
+		opp-suspend;
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&ppvar_gpu>;
+	status = "okay";
+};
+
+ap_i2c_ts: &i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+};
+
+ap_i2c_audio: &i2c8 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	codec: da7219@1a {
+		compatible = "dlg,da7219";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		dlg,micbias-lvl = <2600>;
+		dlg,mic-amp-in-sel = "diff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_int_l>;
+		VDD-supply = <&pp1800>;
+		VDDMIC-supply = <&pp3300>;
+		VDDIO-supply = <&pp1800>;
+
+		da7219_aad {
+			dlg,adc-1bit-rpt = <1>;
+			dlg,btn-avg = <4>;
+			dlg,btn-cfg = <50>;
+			dlg,mic-det-thr = <500>;
+			dlg,jack-ins-deb = <20>;
+			dlg,jack-det-rate = "32ms_64ms";
+			dlg,jack-rem-deb = <1>;
+
+			dlg,a-d-btn-thr = <0xa>;
+			dlg,d-b-btn-thr = <0x16>;
+			dlg,b-c-btn-thr = <0x21>;
+			dlg,c-mic-btn-thr = <0x3E>;
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	audio-supply = <&pp1800_audio>;		/* APIO5_VDD;  3d 4a */
+	bt656-supply = <&pp1800_ap_io>;		/* APIO2_VDD;  2a 2b */
+	gpio1830-supply = <&pp3000_ap>;		/* APIO4_VDD;  4c 4d */
+	sdmmc-supply = <&ppvar_sd_card_io>;	/* SDMMC0_VDD; 4b    */
+};
+
+&pcie0 {
+	status = "okay";
+
+	ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
+	vpcie3v3-supply = <&pp3300_wifi_bt>;
+	vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
+	vpcie0v9-supply = <&pp900_pcie>;
+
+	pci_rootport: pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	status = "okay";
+
+	pmu1830-supply = <&pp1800_pmu>;		/* PMUIO2_VDD */
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	/*
+	 * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
+	 * same (or nearly the same) performance for all eMMC that are intended
+	 * to be used.
+	 */
+	assigned-clock-rates = <150000000>;
+
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+
+	/*
+	 * Note: configure "sdmmc_cd" as card detect even though it's actually
+	 * hooked to ground.  Because we specified "cd-gpios" below dw_mmc
+	 * should be ignoring card detect anyway.  Specifying the pin as
+	 * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
+	 * turned on that the system will still make sure the port is
+	 * configured as SDMMC and not JTAG.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
+		     &sdmmc_bus4>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&pp3000_sd_slot>;
+	vqmmc-supply = <&ppvar_sd_card_io>;
+};
+
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
+&spi1 {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&spi1_sleep>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_l>;
+		spi-max-frequency = <3000000>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon0: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
+&tcphy0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+	extcon = <&usbc_extcon0>;
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&pinctrl {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 *
+	 * At the moment settings are identical for S0 and S3, but if we later
+	 * need to configure things differently for S3 we'll adjust here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&ap_pwroff	/* AP will auto-assert this when in S3 */
+		&clk_32k	/* This pin is always 32k on gru boards */
+	>;
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	backlight-enable {
+		bl_en: bl-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cros-ec {
+		ec_ap_int_l: ec-ap-int-l {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	discrete-regulators {
+		sd_io_pwr_en: sd-io-pwr-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		sd_pwr_1800_sel: sd-pwr-1800-sel {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		sd_slot_pwr_en: sd-slot-pwr-en {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+	};
+
+	codec {
+		/* Has external pullup */
+		headset_int_l: headset-int-l {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		mic_int: mic-int {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	max98357a {
+		sdmode_en: sdmode-en {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pcie {
+		pcie_clkreqn_cpm: pci-clkreqn-cpm {
+			/*
+			 * Since our pcie doesn't support ClockPM(CPM), we want
+			 * to hack this as gpio, so the EP could be able to
+			 * de-assert it along and make ClockPM(CPM) work.
+			 */
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * We run sdmmc at max speed; bump up drive strength.
+		 * We also have external pulls, so disable the internal ones.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_none_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 RK_PB4 1 &pcfg_pull_none_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 RK_PB5 1 &pcfg_pull_none_8ma>;
+		};
+
+		/*
+		 * In our case the official card detect is hooked to ground
+		 * to avoid getting access to JTAG just by sticking something
+		 * in the SD card slot (see the force_jtag bit in the TRM).
+		 *
+		 * We still configure it as card detect because it doesn't
+		 * hurt and dw_mmc will ignore it.  We make sure to disable
+		 * the pull though so we don't burn needless power.
+		 */
+		sdmmc_cd: sdmmc-cd {
+			rockchip,pins =
+				<0 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/* This is where we actually hook up CD; has external pull */
+		sdmmc_cd_pin: sdmmc-cd-pin {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		spi1_sleep: spi1-sleep {
+			/*
+			 * Pull down SPI1 CLK/CS/RX/TX during suspend, to
+			 * prevent leakage.
+			 */
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	touchscreen {
+		touch_int_l: touch-int-l {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		touch_reset_l: touch-reset-l {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	trackpad {
+		ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		trackpad_int_l: trackpad-int-l {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi: wifi {
+		wlan_module_reset_l: wlan-module-reset-l {
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			/* Kevin has an external pull up, but Gru does not */
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	write-protect {
+		ap_fw_wp: ap-fw-wp {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
new file mode 100644
index 000000000..7af27e821
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -0,0 +1,764 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Hugsun X99 TV BOX";
+	compatible = "hugsun,x99", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_5v: dc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_led_pin>;
+
+		power_led: led-0 {
+			label = "blue:power";
+			gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&dc_5v>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&vdd_gpu>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		regulator-initial-mode = <1>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rtc_clko_wifi";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <40>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+	audio-supply = <&vcc1v8_s0>;
+	bt656-supply = <&vcc1v8_s0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sd>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins =
+				<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_rx: ir-rx {
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		power_led_pin: power-led-pin {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins =
+				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			/* external pullup to VCC1V8_PMUPLL */
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg_on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+	pinctrl-0 = <&pwm2_pin_pull_down>;
+};
+
+&saradc {
+	vref-supply = <&vcc1v8_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	clock-frequency = <150000000>;
+	max-frequency = <150000000>;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&vcc_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	card-detect-delay = <800>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&spdif {
+	status = "okay";
+	pinctrl-0 = <&spdif_bus_1>;
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	rockchip,hw-tshut-temp = <110000>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
new file mode 100644
index 000000000..8302e51de
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge-Captain";
+	compatible = "khadas,edge-captain", "rockchip,rk3399";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
new file mode 100644
index 000000000..f5dcb99dc
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge-V";
+	compatible = "khadas,edge-v", "rockchip,rk3399";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts
new file mode 100644
index 000000000..31616e7ad
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+	model = "Khadas Edge";
+	compatible = "khadas,edge", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
new file mode 100644
index 000000000..9d9297bc5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vsys_5v0>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vsys_3v3>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+
+	vsys: vsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: vsys-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys>;
+	};
+
+	vsys_5v0: vsys-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-khadas";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
+
+		sys_led: led-0 {
+			label = "sys_led";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		user_led: led-1 {
+			label = "user_led";
+			default-state = "off";
+			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 150 200 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vsys_5v0>;
+		pwms = <&pwm0 0 40000 0>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&gpu_thermal {
+	trips {
+		gpu_warm: gpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		gpu_hot: gpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&gpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map2 {
+			trip = <&gpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vsys_3v3>;
+		vcc2-supply = <&vsys_3v3>;
+		vcc3-supply = <&vsys_3v3>;
+		vcc4-supply = <&vsys_3v3>;
+		vcc6-supply = <&vsys_3v3>;
+		vcc7-supply = <&vsys_3v3>;
+		vcc8-supply = <&vsys_3v3>;
+		vcc9-supply = <&vsys_3v3>;
+		vcc10-supply = <&vsys_3v3>;
+		vcc11-supply = <&vsys_3v3>;
+		vcc12-supply = <&vsys_3v3>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_apio2: LDO_REG1 {
+				regulator-name = "vcc1v8_apio2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_vldo2: LDO_REG2 {
+				regulator-name = "vcc_vldo2";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_vldo5: LDO_REG5 {
+				regulator-name = "vcc_vldo5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc1v8_codec: LDO_REG7 {
+				regulator-name = "vcc1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_apio2>;
+	audio-supply = <&vcc1v8_codec>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_rx: ir-rx {
+		    rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led_pin: user-led-pin {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc1v8_s3>;
+	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "winbond,w25q128fw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vsys_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
new file mode 100644
index 000000000..1eb287a3f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io>
+ */
+
+/*
+ * The Kobol Helios64 is a board designed to operate as a NAS and optionally
+ * ships with an enclosing that can host five 2.5" hard disks.
+ *
+ * See https://wiki.kobol.io/helios64/intro/ for further details.
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Kobol Helios64";
+	compatible = "kobol,helios64", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi5 = &spi5;
+	};
+
+	avdd_0v9_s0: avdd-0v9-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_0v9_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc1v8_sys_s3>;
+	};
+
+	avdd_1v8_s0: avdd-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_1v8_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys_s3>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	fan1 {
+		/* fan connected to P7 */
+		compatible = "pwm-fan";
+		pwms = <&pwm0 0 40000 0>;
+		cooling-levels = <0 80 170 255>;
+	};
+
+	fan2 {
+		/* fan connected to P6 */
+		compatible = "pwm-fan";
+		pwms = <&pwm1 0 40000 0>;
+		cooling-levels = <0 80 170 255>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>;
+
+		led-0 {
+			label = "helios64:green:status";
+			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "helios64:red:fault";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	hdd_a_power: hdd-a-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hdd_a_power_en>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "hdd_a_power";
+		startup-delay-us = <2000000>;
+	};
+
+	hdd_b_power: hdd-b-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hdd_b_power_en>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "hdd_b_power";
+		startup-delay-us = <2000000>;
+	};
+
+	pcie_power: pcie-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pcie_pwr>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-name = "pcie_power";
+		startup-delay-us = <10000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
+	usblan_power: usblan-power {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_lan_en>;
+		regulator-name = "usblan_power";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc1v8_sys_s0: vcc1v8-sys-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_sys_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc1v8_sys_s3>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		vin-supply = <&vcc3v3_sys_s3>;
+	};
+
+	vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc5v0_perdev: vcc5v0-perdev {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_perdev";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin_bkup>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin_bkup>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc12v_dcin_bkup: vcc12v-dcin-bkup {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin_bkup";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+/*
+ * The system doesn't run stable with cpu freq enabled, so disallow the lower
+ * frequencies until this problem is properly understood and resolved.
+ */
+&cluster0_opp {
+	/delete-node/ opp00;
+	/delete-node/ opp01;
+	/delete-node/ opp02;
+	/delete-node/ opp03;
+	/delete-node/ opp04;
+};
+
+&cluster1_opp {
+	/delete-node/ opp00;
+	/delete-node/ opp01;
+	/delete-node/ opp02;
+	/delete-node/ opp03;
+	/delete-node/ opp04;
+	/delete-node/ opp05;
+	/delete-node/ opp06;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_lan>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &gphy_reset>;
+	rx_delay = <0x20>;
+	tx_delay = <0x28>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys_s3>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys_s3>;
+		vddio-supply = <&vcc3v0_s3>;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		regulators {
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_sys_s3: DCDC_REG4 {
+				regulator-name = "vcc1v8_sys_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio_s0: LDO_REG4 {
+				regulator-name = "vcc_sdio_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v0_s3: LDO_REG8 {
+				regulator-name = "vcc3v0_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	temp@4c {
+		compatible = "national,lm75";
+		reg = <0x4c>;
+	};
+};
+
+&io_domains {
+	audio-supply = <&vcc1v8_sys_s0>;
+	bt656-supply = <&vcc1v8_sys_s0>;
+	gpio1830-supply = <&vcc3v0_s3>;
+	sdmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&pcie_power>;
+	vpcie1v8-supply = <&avdd_1v8_s0>;
+	vpcie0v9-supply = <&avdd_0v9_s0>;
+};
+
+&pinctrl {
+	gmac {
+		gphy_reset: gphy-reset {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	leds {
+		sys_grn_led_on: sys-grn-led-on {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		sys_red_led_on: sys-red-led-on {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =
+				<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	power {
+		hdd_a_power_en: hdd-a-power-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hdd_b_power_en: hdd-b-power-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_en: vcc5v0-usb-en {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_lan_en: usb-lan-en {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v0-sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc3v0_s3>;
+	status = "okay";
+};
+
+&pwm0 {
+	/* pwm-fan on P7 */
+	status = "okay";
+};
+
+&pwm1 {
+	/* pwm-fan on P6 */
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vqmmc-supply = <&vcc1v8_sys_s0>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <25000000>;
+		status = "okay";
+		m25p,fast-read;
+	};
+};
+
+/* UEXT connector */
+&spi2 {
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&tcphy1 {
+	/* phy for &usbdrd_dwc3_1 */
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	otg-port {
+		/* phy for &usbdrd_dwc3_1 */
+		phy-supply = <&vcc5v0_usb>;
+		status = "okay";
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+
+	usb@fe900000 {
+		dr_mode = "host";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hub@1 {
+			compatible = "usb2109,0815";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				#trigger-source-cells = <0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				#trigger-source-cells = <0>;
+			};
+
+			port@3 {
+				reg = <3>;
+				#trigger-source-cells = <0>;
+			};
+
+			device@4 {
+				compatible = "usbbda,8156";
+				reg = <4>;
+				#address-cells = <2>;
+				#size-cells = <0>;
+
+				interface@0 {	/* interface 0 of configuration 1 */
+					compatible = "usbbda,8156.config1.0";
+					reg = <0 1>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
new file mode 100644
index 000000000..a21ac319f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Leez RK3399 P710";
+	compatible = "leez,p710", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	dc5v_adp: dc5v-adp {
+		compatible = "regulator-fixed";
+		regulator-name = "dc5v_adapter";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_lan: vcc3v3-lan {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host3: vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host3";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc5v_adp>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG4 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	bt {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host0>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
new file mode 100644
index 000000000..3bf8f959e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T4";
+	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+	vcc12v0_sys: vcc12v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "vcc12v0_sys";
+	};
+
+	vcc5v0_host0: vcc5v0-host0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc5v0_host0";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		/*
+		 * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+		 * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+		 */
+		cooling-levels = <0 12 18 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&pinctrl {
+	ir {
+		ir_rx: ir-rx {
+			/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
+			rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts
new file mode 100644
index 000000000..60358ab8c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi M4";
+	compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2: vcc5v0-usb2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb2";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
new file mode 100644
index 000000000..65cb21837
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4B board device tree source
+ *
+ * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi-m4.dts"
+
+/ {
+	model = "FriendlyElec NanoPi M4B";
+	compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+};
+
+/* No USB type-C PD power manager */
+/delete-node/ &fusb0;
+
+&i2c4 {
+	status = "disabled";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb2>;
+};
+
+&u2phy0_otg {
+	phy-supply = <&vbus_typec>;
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
new file mode 100644
index 000000000..195410b08
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi NEO4";
+	compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_core: vcc5v0-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v>;
+	};
+
+	vcc5v0_usb1: vcc5v0-usb1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_core>;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+	regulator-always-on;
+	vin-supply = <&vdd_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts
new file mode 100644
index 000000000..a23d11ca0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s-enterprise.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3399-nanopi-r4s.dts"
+
+/ {
+	model = "FriendlyElec NanoPi R4S Enterprise Edition";
+	compatible = "friendlyarm,nanopi-r4s-enterprise", "rockchip,rk3399";
+};
+
+&gmac {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c2 {
+	eeprom@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		size = <256>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
new file mode 100644
index 000000000..fe5b52610
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ *
+ * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
+ * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
+ * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R4S";
+	compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
+	/delete-node/ display-subsystem;
+
+	gpio-leds {
+		pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+
+		/delete-node/ led-0;
+
+		lan_led: led-lan {
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+			label = "green:lan";
+		};
+
+		sys_led: led-sys {
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "red:power";
+			default-state = "on";
+		};
+
+		wan_led: led-wan {
+			gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+			label = "green:wan";
+		};
+	};
+
+	gpio-keys {
+		pinctrl-0 = <&reset_button_pin>;
+
+		/delete-node/ key-power;
+
+		key-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	vdd_5v: vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc_phy {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&pcie0 {
+	max-link-speed = <1>;
+	num-lanes = <1>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+};
+
+&pinctrl {
+	gpio-leds {
+		/delete-node/ status-led-pin;
+
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rockchip-key {
+		/delete-node/ power-key;
+
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdhci {
+	status = "disabled";
+};
+
+&sdio0 {
+	status = "disabled";
+};
+
+&u2phy0_host {
+	phy-supply = <&vdd_5v>;
+};
+
+&u2phy1_host {
+	status = "disabled";
+};
+
+&uart0 {
+	status = "disabled";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
new file mode 100644
index 000000000..7c5f441a2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * RK3399-based FriendlyElec boards device tree source
+ *
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2019 Arm Ltd.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sys";
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+		vin-supply = <&vdd_5v>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcc1v8_s3";
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/*
+	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+	 * drives the enable pin, but we can't quite model that.
+	 */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		regulator-name = "vcca0v9_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	/* As above, actually supplied by vcc3v3_sys */
+	vcca1v8_s3: vcca1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcca1v8_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "vbus_typec";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-0 {
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			label = "status_led";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	rockchip,enable-strobe-pulldown;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+	phy-handle = <&rtl8211e>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_s3>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c7>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-name = "vdd_cpu_b";
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		clock-output-names = "xin32k", "rtc_clko_wifi";
+		#clock-cells = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_center";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_cpu_l";
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_cam: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_cam";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc3v0_touch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_pmupll";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sdio";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcca3v0_codec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc_1v5";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_codec";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_3v0";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s3";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <200000>;
+	i2c-scl-rising-time-ns = <150>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <160>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vbus_typec>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pcie_phy {
+	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
+	assigned-clock-rates = <100000000>;
+	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+	status = "okay";
+};
+
+&pcie0 {
+	num-lanes = <2>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&pinctrl {
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gmac {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		power_key: power-key {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			/* external pullup to VCC1V8_PMUPLL */
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg_on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc0_det_l: sdmmc0-det-l {
+			rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "active";
+	pinctrl-0 = <&pwm2_pin_pull_down>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_host {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <4000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
new file mode 100644
index 000000000..783120e9c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <900000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <800000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <900000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <975000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <850000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1075000>;
+		};
+	};
+
+	dmc_opp_table: opp-table-3 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <900000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-microvolt = <900000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <928000000>;
+			opp-microvolt = <925000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&dmc {
+	operating-points-v2 = <&dmc_opp_table>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
new file mode 100644
index 000000000..fee5e7111
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000 850000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000 925000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1125000 1125000 1250000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000 825000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <825000 825000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <950000 950000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000 1025000 1250000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000 1100000 1250000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1200000 1200000 1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <297000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000 825000 1150000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <925000 925000 1150000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1100000 1100000 1150000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
new file mode 100644
index 000000000..dba4d03bf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -0,0 +1,895 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dt-bindings/usb/pd.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Orange Pi RK3399 Board";
+	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <985000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <1314000>;
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vbus_typec";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_s3>;
+	phy-mode = "rgmii";
+	phy-handle = <&rtl8211e>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtl8211e: ethernet-phy@1 {
+			reg = <1>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <30000>;
+			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cpu_b_sleep>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpu_sleep>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	ak09911@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+		vdd-supply = <&vcc3v3_s3>;
+		vid-supply = <&vcc3v3_s3>;
+	};
+
+	mpu6500@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int_l>;
+		vddio-supply = <&vcc3v3_s3>;
+	};
+
+	lsm6ds3@6a {
+		compatible = "st,lsm6ds3";
+		reg = <0x6a>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gyr_int_l>;
+		vdd-supply = <&vcc3v3_s3>;
+		vddio-supply = <&vcc3v3_s3>;
+	};
+
+	cm32181@10 {
+		compatible = "capella,cm32181";
+		reg = <0x10>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&light_int_l>;
+		vdd-supply = <&vcc3v3_s3>;
+	};
+
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&chg_cc_int_l>;
+		vbus-supply = <&vbus_typec>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "host";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					typec_hs: endpoint {
+						remote-endpoint = <&u2phy0_typec_hs>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					typec_ss: endpoint {
+						remote-endpoint = <&tcphy0_typec_ss>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					typec_dp: endpoint {
+						remote-endpoint = <&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_3v0>;
+};
+
+&pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac {
+		phy_intb: phy-intb {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rstb: phy-rstb {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		cpu_b_sleep: cpu-b-sleep {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		gpu_sleep: gpu-sleep {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_typec_en: vcc5v0-typec-en {
+			rockchip,pins =
+				<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bluetooth {
+		bt_reg_on_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mpu6500 {
+		gsensor_int_l: gsensor-int-l {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lsm6ds3 {
+		gyr_int_l: gyr-int-l {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	cm32181 {
+		light_int_l: light-int-l {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb302 {
+		chg_cc_int_l: chg-cc-int-l {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	clock-frequency = <150000000>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&typec_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&typec_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&typec_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
new file mode 100644
index 000000000..054c6a4d1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -0,0 +1,1111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 Pinebook Pro";
+	compatible = "pine64,pinebook-pro", "rockchip,rk3399";
+	chassis-type = "laptop";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: edp-backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_12v>;
+		pwms = <&pwm0 0 740740 0>;
+	};
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv140fhmn49";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_en_pin>;
+		power-supply = <&vcc3v3_panel>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	/*
+	 * Use separate nodes for gpio-keys to allow for selective deactivation
+	 * of wakeup sources via sysfs without disabling the whole key
+	 */
+	gpio-key-lid {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lidbtn_pin>;
+
+		switch-lid {
+			debounce-interval = <20>;
+			gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "Lid";
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-key-power {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_pin>;
+
+		key-power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+			label = "green:power";
+		};
+
+		red_led: led-1 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STANDBY;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			label = "red:standby";
+			panic-indicator;
+			retain-state-suspended;
+		};
+	};
+
+	/* Power sequence for SDIO WiFi module */
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_pin>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <500000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Audio components */
+	es8316-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "rockchip,es8316-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker Amplifier INL", "HPOL",
+			"Speaker Amplifier INR", "HPOR",
+			"Speaker", "Speaker Amplifier OUTL",
+			"Speaker", "Speaker Amplifier OUTR";
+
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,aux-devs = <&speaker_amp>;
+		simple-audio-card,pin-switches = "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8316>;
+		};
+	};
+
+	speaker_amp: speaker-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Speaker Amplifier";
+		VCC-supply = <&pa_5v>;
+	};
+
+	/* Power tree */
+	/* Root power source */
+	vcc_sysin: vcc-sysin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sysin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Regulators supplied by vcc_sysin */
+	/* LCD backlight supply */
+	vcc_12v: vcc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Main 3.3 V supply */
+	vcc3v3_sys: wifi_bat: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* 5 V USB power supply */
+	vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_5v_pin>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sysin>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* RK3399 logic supply */
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sysin>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc3v3_sys */
+	/* 0.9 V supply, always on */
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* S3 1.8 V supply, switched by vcc1v8_s3 */
+	vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* LCD panel power, called VCC3V3_S0 in schematic */
+	vcc3v3_panel: vcc3v3-panel {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdvcc_en_pin>;
+		regulator-name = "vcc3v3_panel";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <100000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* M.2 adapter power, switched by vcc1v8_s3 */
+	vcc3v3_ssd: vcc3v3-ssd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ssd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* USB 3 port power supply regulator  */
+	vcc5v0_otg: vcc5v0-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en_pin>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc5v0_usb */
+	/* Type C port power supply regulator */
+	vbus_5vout: vbus_typec: vbus-5vout {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
+		regulator-name = "vbus_5vout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	/* Regulators supplied by vcc_1v8 */
+	/* Primary 0.9 V LDO */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_s3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	mains_charger: dc-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
+
+		/* Also triggered by USB charger */
+		pinctrl-names = "default";
+		pinctrl-0 = <&dc_det_pin>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&edp {
+	force-hpd;
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l_pin>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sysin>;
+		vcc2-supply = <&vcc_sysin>;
+		vcc3-supply = <&vcc_sysin>;
+		vcc4-supply = <&vcc_sysin>;
+		vcc6-supply = <&vcc_sysin>;
+		vcc7-supply = <&vcc_sysin>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sysin>;
+		vcc10-supply = <&vcc_sysin>;
+		vcc11-supply = <&vcc_sysin>;
+		vcc12-supply = <&vcc3v3_sys>;
+
+		regulators {
+			/* rk3399 center logic supply */
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: vcc_wl: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			/* not used */
+			LDO_REG1 {
+			};
+
+			/* not used */
+			LDO_REG2 {
+			};
+
+			vcc1v8_pmupll: LDO_REG3 {
+				regulator-name = "vcc1v8_pmupll";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		vin-supply = <&vcc_1v8>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	i2c-scl-falling-time-ns = <4>;
+	i2c-scl-rising-time-ns = <168>;
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-falling-time-ns = <15>;
+	i2c-scl-rising-time-ns = <450>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-falling-time-ns = <20>;
+	i2c-scl-rising-time-ns = <600>;
+	status = "okay";
+
+	fusb0: fusb30x@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int_pin>;
+		vbus-supply = <&vbus_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc_hs: endpoint {
+						remote-endpoint =
+							<&u2phy0_typec_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc_ss: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usbc_dp: endpoint {
+						remote-endpoint =
+							<&tcphy0_typec_dp>;
+					};
+				};
+			};
+		};
+	};
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+		>;
+		cellwise,monitor-interval-ms = <5000>;
+		monitored-battery = <&bat>;
+		power-supplies = <&mains_charger>, <&fusb0>;
+	};
+};
+
+&i2s1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
+	rockchip,capture-channels = <8>;
+	rockchip,playback-channels = <8>;
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	bus-scan-delay-ms = <1000>;
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
+	vpcie3v3-supply = <&vcc3v3_ssd>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_pin: pwrbtn-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		lidbtn_pin: lidbtn-pin {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	dc-charger {
+		dc_det_pin: dc-det-pin {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	es8316 {
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int_pin: fusb0-int-pin {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcdvcc_en_pin: lcdvcc-en-pin {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		panel_en_pin: panel-en-pin {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_panel_reset_pin: lcd-panel-reset-pin {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		pwr_led_pin: pwr-led-pin {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		slp_led_pin: slp-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l_pin: pmic-int-l-pin {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_pin: wifi-enable-h-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		pwr_5v_pin: pwr-5v-pin {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_pin: bt-host-wake-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	max-freq = <10000000>;
+	status = "okay";
+
+	spiflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy0_dp {
+	port {
+		tcphy0_typec_dp: endpoint {
+			remote-endpoint = <&usbc_dp>;
+		};
+	};
+};
+
+&tcphy0_usb3 {
+	port {
+		tcphy0_typec_ss: endpoint {
+			remote-endpoint = <&usbc_ss>;
+		};
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+
+	port {
+		u2phy0_typec_hs: endpoint {
+			remote-endpoint = <&usbc_hs>;
+		};
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_otg>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&wifi_bat>;
+		vddio-supply = <&vcc_wl>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
new file mode 100644
index 000000000..61f3fec5a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
+ * Copyright (c) 2021 Kamil Trzciński <ayufan@ayufan.eu>
+ */
+
+/*
+ * PinePhone Pro datasheet:
+ * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Pine64 PinePhonePro";
+	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1600000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <600000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000 0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn_pin>;
+
+		key-power {
+			debounce-interval = <20>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcca1v8_s3: vcc1v8-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_s3";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_codec: vcc1v8-codec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc1v8_codec_en>;
+		regulator-name = "vcc1v8_codec";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	wifi_pwrseq: sdio-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk818 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h_pin>;
+		/*
+		 * Wait between power-on and SDIO access for CYP43455
+		 * POR circuit.
+		 */
+		post-power-on-delay-ms = <110>;
+		/*
+		 * Wait between consecutive toggles for CYP43455 CBUCK
+		 * regulator discharge.
+		 */
+		power-off-delay-us = <10000>;
+
+		/* WL_REG_ON on module */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	/* MIPI DSI panel 1.8v supply */
+	vcc1v8_lcd: vcc1v8-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc1v8_lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+	};
+
+	/* MIPI DSI panel 2.8v supply */
+	vcc2v8_lcd: vcc2v8-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		regulator-name = "vcc2v8_lcd";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_sys>;
+		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+	};
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+&cpu_alert1 {
+	temperature = <68000>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk818: pmic@1c {
+		compatible = "rockchip,rk818";
+		reg = <0x1c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_cpu_l: DCDC_REG1 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <975000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_center: DCDC_REG2 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG1 {
+				regulator-name = "vcca3v0_codec";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcca1v8_codec: LDO_REG3 {
+				regulator-name = "vcca1v8_codec";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			rk818_pwr_on: LDO_REG4 {
+				regulator-name = "rk818_pwr_on";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG5 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG7 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc3v3_s3: LDO_REG8 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG9 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc3v3_s0: SWITCH_REG {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <875000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <875000>;
+		regulator-max-microvolt = <975000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	touchscreen@14 {
+		compatible = "goodix,gt1158";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
+		irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
+&cluster0_opp {
+	opp04 {
+		status = "disabled";
+	};
+
+	opp05 {
+		status = "disabled";
+	};
+};
+
+&cluster1_opp {
+	opp06 {
+		opp-hz = /bits/ 64 <1500000000>;
+		opp-microvolt = <1100000 1100000 1150000>;
+	};
+
+	opp07 {
+		status = "disabled";
+	};
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+	clock-master;
+
+	ports {
+		mipi_out: port@1 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "hannstar,hsd060bhw4";
+		reg = <0>;
+		backlight = <&backlight>;
+		reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vcc2v8_lcd>;
+		iovcc-supply = <&vcc1v8_lcd>;
+		pinctrl-names = "default";
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwrbtn_pin: pwrbtn-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h_pin: wifi-enable-h-pin {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		vcc1v8_codec_en: vcc1v8-codec-en {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wireless-bluetooth {
+		bt_wake_pin: bt-wake-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_pin: bt-host-wake-pin {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reset_pin: bt-reset-pin {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk818 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
+			  <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+	assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
+			  <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+	assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
+	assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
new file mode 100644
index 000000000..115c14c0a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3399-Q7 SoM";
+	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
+
+		sd_card_led: led-1 {
+			label = "sd_card_led";
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator  {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+
+	vdda_codec: vdda-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vdda_codec>;
+		VDDD-supply = <&vddd_codec>;
+		status = "okay";
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+			  /* LID_BTN */
+			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		sd_card_led_pin: sd-card-led-pin {
+			rockchip,pins =
+			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <40000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
new file mode 100644
index 000000000..20e3f41ef
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&module_led_pin>;
+
+		module_led: led-0 {
+			label = "module_led";
+			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc1v2_phy: vcc1v2-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2_phy";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+	drive-impedance-ohm = <33>;
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc1v2_phy>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_ldo1: LDO_REG1 {
+				regulator-name = "vcc_ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcc1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_ldo5: LDO_REG5 {
+				regulator-name = "vcc_ldo5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ldo6: LDO_REG6 {
+				regulator-name = "vcc_ldo6";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcc0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_efuse: LDO_REG8 {
+				regulator-name = "vcc_efuse";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_gpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	fan: fan@18 {
+		compatible = "ti,amc6821";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
+	rtc_twi: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	vdd_cpu_b: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1230000>;
+		regulator-ramp-delay = <1000>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+/*
+ * As Q7 does not specify neither a global nor a RX clock for I2S these
+ * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
+ * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
+ * conflicts.
+ */
+&i2s0_2ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcc_1v8>;
+	audio-supply = <&vcc_1v8>;
+	sdmmc-supply = <&vcc_sd>;
+	gpio1830-supply = <&vcc_1v8>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	i2c8 {
+		i2c8_xfer_a: i2c8-xfer {
+			rockchip,pins =
+			  <1 RK_PC4 1 &pcfg_pull_up>,
+			  <1 RK_PC5 1 &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		module_led_pin: module-led-pin {
+			rockchip,pins =
+			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+			  <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	vqmmc-supply = <&vcc_sd>;
+};
+
+&spi1 {
+	status = "okay";
+
+	norflash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
new file mode 100644
index 000000000..9447c8724
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Mezzanine Board";
+	compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+
+	/* MP8009 PoE PD */
+	poe_12v: poe-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "poe_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_ngff: vcc3v3-ngff {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_ngff_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&sys_12v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&sys_12v>;
+	};
+};
+
+&sys_12v {
+	vin-supply = <&poe_12v>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
+	status = "okay";
+};
+
+&pinctrl {
+	ngff {
+		vcc3v3_ngff_en: vcc3v3-ngff-en {
+			rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_pcie_en: vcc3v3-pcie-en {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_perst: pcie-perst {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_ngff>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
new file mode 100644
index 000000000..7ba1c28f7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/*
+ * Notice:
+ * 1. rk3399-roc-pc-plus is powered by dc_12v directly.
+ * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding
+ *    to vcc_vbus_typec1 in rk3399-roc-pc.
+ *    For simplicity, reserve the node name of vcc_vbus_typec1.
+ * 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio.
+ */
+
+/delete-node/ &fusb1;
+/delete-node/ &hub_rst;
+/delete-node/ &mp8859;
+/delete-node/ &vcc_sys_en;
+/delete-node/ &vcc_vbus_typec0;
+/delete-node/ &yellow_led;
+
+/ {
+	model = "Firefly ROC-RK3399-PC-PLUS Board";
+	compatible = "firefly,roc-rk3399-pc-plus", "rockchip,rk3399";
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	es8388-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "rockchip,es8388-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones";
+		simple-audio-card,routing =
+			"LINPUT1", "Mic Jack",
+			"Headphone Amp INL", "LOUT2",
+			"Headphone Amp INR", "ROUT2",
+			"Headphones", "Headphone Amp OUTL",
+			"Headphones", "Headphone Amp OUTR";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,aux-devs = <&headphones_amp>;
+		simple-audio-card,pin-switches = "Headphones";
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1>;
+		};
+	};
+
+	gpio-fan {
+		#cooling-cells = <2>;
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 3000 1>;
+		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	};
+
+	/delete-node/ gpio-keys;
+
+	/* not amplifier, used as switcher only */
+	headphones_amp: headphones-amp {
+		compatible = "simple-audio-amplifier";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ear_ctl_pin>;
+		enable-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphone Amp";
+		VCC-supply = <&vcca3v0_codec>;
+	};
+
+	ir-receiver {
+		linux,rc-map-name = "rc-khadas";
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+	};
+};
+
+&fusb0 {
+	vbus-supply = <&vcc_vbus_typec1>;
+};
+
+&i2c0 {
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+	};
+};
+
+&i2c1 {
+	es8388: es8388@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* <4 RK_PA0 1 &pcfg_pull_none> is used as i2s_8ch_mclk_pin */
+&i2s0_8ch_bus {
+	rockchip,pins =
+		<3 RK_PD0 1 &pcfg_pull_none>,
+		<3 RK_PD1 1 &pcfg_pull_none>,
+		<3 RK_PD2 1 &pcfg_pull_none>,
+		<3 RK_PD3 1 &pcfg_pull_none>,
+		<3 RK_PD4 1 &pcfg_pull_none>,
+		<3 RK_PD5 1 &pcfg_pull_none>,
+		<3 RK_PD6 1 &pcfg_pull_none>,
+		<3 RK_PD7 1 &pcfg_pull_none>;
+};
+
+&i2s1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&pinctrl {
+	es8388 {
+		ear_ctl_pin: ear-ctl-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	i2s1 {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
+			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&vcc_sys {
+	/* vcc_sys is fixed, not controlled by any gpio */
+	/delete-property/ gpio;
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&vcc5v0_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
new file mode 100644
index 000000000..cd4195425
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include "rk3399-roc-pc.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
new file mode 100644
index 000000000..c32913df9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -0,0 +1,843 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3399-PC Board";
+	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1500000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key_l>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
+
+		work_led: led-0 {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy_led: led-1 {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc2";
+		};
+
+		yellow_led: led-2 {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_vbus_typec0: vcc-vbus-typec0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_vbus_typec0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sys_12v: sys-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&dc_12v>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&sys_12v>;
+	};
+
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+		regulator-name = "vcc5v0_host";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_vbus_typec1: vcc-vbus-typec1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_vbus_typec1_en>;
+		regulator-name = "vcc_vbus_typec1";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sys_en>;
+		regulator-name = "vcc_sys";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&sys_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <450000>;
+		regulator-max-microvolt = <1400000>;
+		pwm-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		vcc10-supply = <&vcc3v3_sys>;
+		vcc11-supply = <&vcc3v3_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_3v0>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb1: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb1_int>;
+		vbus-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+};
+
+&i2c7 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vcc_vbus_typec0>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <12000000>;
+			};
+		};
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_key_l: pwr-key-l {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led_pin: work-led-pin {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_pin: yellow-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_sys_en: vcc-sys-en {
+			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb-typec {
+		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fusb30x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		fusb1_int: fusb1-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec0>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_vbus_typec1>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
new file mode 100644
index 000000000..8bfd5f88d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "rk3399.dtsi"
+#include "rk3399-t-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK 4C+";
+	compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1 &user_led2>;
+
+		/* USER_LED1 */
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		/* USER_LED2 */
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_3v3: vcc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_phy1: vcc3v3-phy1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_phy1";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_host1: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host1";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_host0_s0>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_log: vdd-log-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x2a>;
+	rx_delay = <0x21>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcc_0v9_s0>;
+	avdd-1v8-supply = <&vcc_1v8_s0>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
+	clock-frequency = <400000>;
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5_s3>;
+		vcc6-supply = <&vcc_buck5_s3>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_center";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_cpu_l";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc3v3_sys";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5_s3: DCDC_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_buck5_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_0v9_s3: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vcc_0v9_s3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9_s0: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vcc_0v9_s0";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_1v8_s0: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_mipi: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_mipi";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5_s0: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc_1v5_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0_s0: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc_3v0_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sdio_s0: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_sdio_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_cam: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_cam";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_host0_s0: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc5v0_host0_s0";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			lcd_3v3: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "lcd_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel1_gpio>;
+		vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-compatible = "fan53555-reg";
+		pinctrl-0 = <&vsel2_gpio>;
+		vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcc_1v8_s0>;
+	bt656-supply = <&vcc_3v0_s0>;
+	gpio1830-supply = <&vcc_3v0_s0>;
+	sdmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led1: user-led1 {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user-led2 {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>,
+					<4 9 1 &pcfg_pull_up_8ma>,
+					<4 10 1 &pcfg_pull_up_8ma>,
+					<4 11 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec0_en: vcc5v0-typec-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0_s0>;
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vcc_1v8_s3>;
+};
+
+&sdhci {
+	max-frequency = <150000000>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&vcc_sdio_s0>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host1>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
new file mode 100644
index 000000000..7cfc198bb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-t-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK 4SE";
+	compatible = "radxa,rock-4se", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
new file mode 100644
index 000000000..f2279aa6c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -0,0 +1,791 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led2>;
+
+		/* USER_LED2 */
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound: sound {
+		compatible = "audio-graph-card";
+		label = "Analog";
+		dais = <&i2s0_p0>;
+	};
+
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vbus_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcin: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_lan: vcc3v3-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG1 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_cam: SWITCH_REG1 {
+				regulator-name = "vcc_cam";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_mipi: SWITCH_REG2 {
+				regulator-name = "vcc_mipi";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	es8316: codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_p0_0>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
+	rockchip,capture-channels = <2>;
+	rockchip,playback-channels = <2>;
+	status = "okay";
+
+	i2s0_p0: port {
+		i2s0_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	audio-supply = <&vcca1v8_codec>;
+	bt656-supply = <&vcc_3v0>;
+	gpio1830-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcc_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	es8316 {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hp_int: hp-int {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		user_led2: user-led2 {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio0 {
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC5 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC6 1 &pcfg_pull_up_20ma>,
+					<2 RK_PC7 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0-typec-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+
+	vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	max-frequency = <150000000>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&spdif {
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
new file mode 100644
index 000000000..f5a68d8d0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A+";
+	compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
new file mode 100644
index 000000000..d5df8939a
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4A";
+	compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
new file mode 100644
index 000000000..8a17c1eaa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-op1-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B+";
+	compatible = "radxa,rockpi4b-plus", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
new file mode 100644
index 000000000..bee6d7588
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4B";
+	compatible = "radxa,rockpi4b", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
new file mode 100644
index 000000000..de2ebe4cb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi 4C";
+	compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+};
+
+&es8316 {
+	pinctrl-0 = <&hp_detect &hp_int>;
+	pinctrl-names = "default";
+	interrupt-parent = <&gpio1>;
+	interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdio0 {
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sound {
+	hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		max-speed = <1500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&vcc5v0_host {
+	gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host_en {
+	rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
new file mode 100644
index 000000000..1a23e8f3c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+	model = "96boards Rock960";
+	compatible = "vamrs,rock960", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
+			    <&user_led3_pin>, <&user_led4_pin>,
+			    <&wlan_led_pin>, <&bt_led_pin>;
+
+		user_led1: led-1 {
+			label = "green:user1";
+			gpios = <&gpio4 RK_PC2 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2: led-2 {
+			label = "green:user2";
+			gpios = <&gpio4 RK_PC6 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3: led-3 {
+			label = "green:user3";
+			gpios = <&gpio4 RK_PD0 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4: led-4 {
+			label = "green:user4";
+			gpios = <&gpio4 RK_PD4 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led: led-5 {
+			label = "yellow:wlan";
+			gpios = <&gpio4 RK_PD5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led: led-6 {
+			label = "blue:bt";
+			gpios = <&gpio4 RK_PD6 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_thermal {
+	sustainable-power = <1550>;
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert1>;
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	leds {
+		user_led1_pin: user-led1-pin {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2_pin: user-led2-pin {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3_pin: user-led3-pin {
+			rockchip,pins =
+				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4_pin: user-led4-pin {
+			rockchip,pins =
+				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins =
+				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led_pin: bt-led-pin {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spi0 {
+	/* On Low speed expansion (LS-SPI0) */
+	status = "okay";
+};
+
+&spi4 {
+	/* On High speed expansion (HS-SPI1) */
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+	gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+	gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
new file mode 100644
index 000000000..c920ddf44
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vcca0v9_hdmi>;
+	avdd-1v8-supply = <&vcca1v8_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		status = "okay";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2s2 {
+        status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+	audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+	sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+	gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 RK_PB0 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_up_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 RK_PB4 1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 RK_PB5 1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	sdio0 {
+		sdio0_bus4: sdio0-bus4 {
+			rockchip,pins =
+				<2 RK_PC4 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC5 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC6 1 &pcfg_pull_up_20ma>,
+				<2 RK_PC7 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_cmd: sdio0-cmd {
+			rockchip,pins =
+				<2 RK_PD0 1 &pcfg_pull_up_20ma>;
+		};
+
+		sdio0_clk: sdio0-clk {
+			rockchip,pins =
+				<2 RK_PD1 1 &pcfg_pull_none_20ma>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins =
+				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins =
+				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	clock-frequency = <50000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc_sd>;
+	card-detect-delay = <800>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	rockchip,hw-tshut-temp = <110000>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
new file mode 100644
index 000000000..304e3c513
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.0";
+	compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@10 {
+		compatible = "everest,es8316";
+		reg = <0x10>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
new file mode 100644
index 000000000..4b4271780
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.1";
+	compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
new file mode 100644
index 000000000..bca2b50e0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -0,0 +1,955 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdio0;
+		mmc1 = &sdmmc;
+		mmc2 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	/* enable for panel backlight support */
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <5>;
+		pwms = <&pwm0 0 1000000 0>;
+		status = "disabled";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
+
+		work_led: led-0 {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy_led: led-1 {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 100 150 200 255>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc12v_dcin>;
+		pwms = <&pwm1 0 50000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "Analog";
+		dais = <&i2s1_p0>;
+	};
+
+	sound-dit {
+		compatible = "audio-graph-card";
+		label = "SPDIF";
+		dais = <&spdif_p0>;
+	};
+
+	spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port {
+			dit_p0_0: endpoint {
+				remote-endpoint = <&spdif_p0_0>;
+			};
+		};
+	};
+
+	avdd: avdd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd";
+		regulator-min-microvolt = <11000000>;
+		regulator-max-microvolt = <11000000>;
+		vin-supply = <&vcc3v3_s0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	/* micro SD card power */
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr_en>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_typec: vcc5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec_en>;
+		regulator-name = "vcc5v0_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1700000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_touch: LDO_REG2 {
+				regulator-name = "vcc3v0_touch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel1_pin>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vsel2_pin>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	fusb0: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fusb0_int>;
+		vbus-supply = <&vcc5v0_typec>;
+		status = "okay";
+	};
+
+	/* enable for pine64 touch screen support */
+	touch: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v0_touch>;
+		VDDIO-supply = <&vcc3v0_touch>;
+		irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&i2s1 {
+	rockchip,playback-channels = <2>;
+	rockchip,capture-channels = <2>;
+	status = "okay";
+
+	i2s1_p0: port {
+		i2s1_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc1v8_dvp>;
+	audio-supply = <&vcc_3v0>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+/* enable for pine64 panel display support */
+&mipi_dsi {
+	clock-master;
+	status = "disabled";
+
+	ports {
+		mipi_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	mipi_panel: panel@0 {
+		compatible = "feiyang,fy07024di26a30d";
+		reg = <0>;
+		avdd-supply = <&avdd>;
+		backlight = <&backlight>;
+		dvdd-supply = <&vcc3v3_s0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_perst>;
+	vpcie12v-supply = <&vcc12v_dcin>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fusb302x {
+		fusb0_int: fusb0-int {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_pin: work-led-pin {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_pin: diy-led-pin {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_perst: pcie-perst {
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_pwr_en: pcie-pwr-en {
+			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sdcard {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		vcc5v0_typec_en: vcc5v0_typec_en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-0 = <&spdif_bus_1>;
+
+	spdif_p0: port {
+		spdif_p0_0: endpoint {
+			remote-endpoint = <&dit_p0_0>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk808 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
new file mode 100644
index 000000000..dbec2b717
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-sapphire.dtsi"
+
+/ {
+	model = "Excavator-RK3399 Board";
+	compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
+
+	aliases {
+		mmc2 = &sdio0;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			press-threshold-microvolt = <985000>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <1314000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <200>;
+		enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm0 0 25000 0>;
+		status = "okay";
+	};
+
+	edp_panel: edp-panel {
+		compatible = "lg,lp079qx1-sp0v";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_panel_reset>;
+		power-supply = <&vcc3v3_s0>;
+
+		port {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+
+	rt5651-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "realtek,rt5651-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Mic Jack", "MICBIAS1",
+			"IN1P", "Mic Jack",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5651>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk808 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&edp {
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-rising-time-ns = <300>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+
+	rt5651: rt5651@1a {
+		compatible = "rockchip,rt5651";
+		reg = <0x1a>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+		spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c4 {
+	i2c-scl-rising-time-ns = <600>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	accelerometer@68 {
+		compatible = "invensense,mpu6500";
+		reg = <0x68>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2s0 {
+	rockchip,playback-channels = <8>;
+	rockchip,capture-channels = <8>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd-panel {
+		lcd_panel_reset: lcd-panel-reset {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	clock-frequency = <50000000>;
+	keep-power-in-suspend;
+	max-frequency = <50000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
new file mode 100644
index 000000000..5a5806044
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-sapphire.dtsi"
+
+/ {
+	model = "Sapphire-RK3399 Board";
+	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
new file mode 100644
index 000000000..e6ac292ce
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -0,0 +1,653 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/input/input.h"
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/*
+	 * The fan power supply comes from the baseboard.
+	 * For the standalone Sapphire one option is to connect a wire
+	 * from  R90030 DNP R0805 pin2  to  C90002 10uF C0805 pin1 (vcc_sys).
+	 */
+	fan0: gpio-fan {
+		#cooling-cells = <2>;
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 3000 1>;
+		gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			linux,input-type = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_btn>;
+			wakeup-source;
+		};
+	};
+
+	/* switched by pmic_sleep */
+	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc0_pwr_h>;
+		regulator-always-on;
+		regulator-max-microvolt = <3000000>;
+		regulator-min-microvolt = <3000000>;
+		regulator-name = "vcc3v0_sd";
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_typec0: vcc5v0-typec0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en>;
+		regulator-name = "vcc5v0_typec0";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_hot: cpu_hot {
+			hysteresis = <10000>;
+			temperature = <55000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			cooling-device =
+				<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			trip = <&cpu_hot>;
+		};
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc1v8_pmu>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v0_tp: LDO_REG2 {
+				regulator-name = "vcc3v0_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_pmu: LDO_REG3 {
+				regulator-name = "vcc1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sdio: LDO_REG4 {
+				regulator-name = "vcc_sdio";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcca3v0_codec: LDO_REG5 {
+				regulator-name = "vcca3v0_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca1v8_codec: LDO_REG7 {
+				regulator-name = "vcca1v8_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+
+	bt656-supply = <&vcc_3v0>;
+	audio-supply = <&vcca1v8_codec>;
+	sdmmc-supply = <&vcc_sdio>;
+	gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_3v0>;
+	status = "okay";
+};
+
+&pinctrl {
+	buttons {
+		pwr_btn: pwr-btn {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	fan {
+		motor_pwr: motor-pwr {
+			rockchip,pins =
+				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_pin: vsel1-pin {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_pin: vsel2-pin {
+			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	sd {
+		sdmmc0_pwr_h: sdmmc0-pwr-h {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins =
+				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_typec0_en: vcc5v0-typec0-en {
+			rockchip,pins =
+				<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_s3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	broken-cd;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <150000000>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc5v0_typec0>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc5v0_host>;
+		status = "okay";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi
new file mode 100644
index 000000000..1ababadda
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-t-opp.dtsi
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2022 Radxa Limited
+ */
+
+/ {
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <875000 875000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000 900000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <975000 975000 1250000>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <875000 875000 1250000>;
+			clock-latency-ns = <40000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000 875000 1250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000 925000 1250000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000 1000000 1250000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1075000 1075000 1250000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1150000 1150000 1250000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <875000 875000 1150000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000 975000 1150000>;
+		};
+	};
+};
+
+&cpu_l0 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l1 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l2 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_l3 {
+	operating-points-v2 = <&cluster0_opp>;
+};
+
+&cpu_b0 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&cpu_b1 {
+	operating-points-v2 = <&cluster1_opp>;
+};
+
+&gpu {
+	operating-points-v2 = <&gpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
new file mode 100644
index 000000000..4a3d0af5e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -0,0 +1,2941 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/rk3399-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "rockchip,rk3399";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &gmac;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_l3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <485>;
+			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		cpu_b0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+
+			thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <500>;
+			};
+		};
+
+		cpu_b1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+
+			thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <500>;
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
+	dmc: memory-controller {
+		compatible = "rockchip,rk3399-dmc";
+		rockchip,pmu = <&pmugrf>;
+		devfreq-events = <&dfi>;
+		clocks = <&cru SCLK_DDRC>;
+		clock-names = "dmc_clk";
+		status = "disabled";
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+		arm,no-tick-in-suspend;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	pcie0: pcie@f8000000 {
+		compatible = "rockchip,rk3399-pcie";
+		reg = <0x0 0xf8000000 0x0 0x2000000>,
+		      <0x0 0xfd000000 0x0 0x1000000>;
+		reg-names = "axi-base", "apb-base";
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		aspm-no-l0s;
+		bus-range = <0x0 0x1f>;
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "legacy", "client";
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+				<0 0 0 2 &pcie0_intc 1>,
+				<0 0 0 3 &pcie0_intc 2>,
+				<0 0 0 4 &pcie0_intc 3>;
+		max-link-speed = <1>;
+		msi-map = <0x0 &its 0x0 0x1000>;
+		phys = <&pcie_phy 0>, <&pcie_phy 1>,
+		       <&pcie_phy 2>, <&pcie_phy 3>;
+		phy-names = "pcie-phy-0", "pcie-phy-1",
+			    "pcie-phy-2", "pcie-phy-3";
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+			 <&cru SRST_A_PCIE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+			      "pm", "pclk", "aclk";
+		status = "disabled";
+
+		pcie0_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie0_ep: pcie-ep@f8000000 {
+		compatible = "rockchip,rk3399-pcie-ep";
+		reg = <0x0 0xfd000000 0x0 0x1000000>,
+		      <0x0 0xfa000000 0x0 0x2000000>;
+		reg-names = "apb-base", "mem-base";
+		clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+			 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+		clock-names = "aclk", "aclk-perf",
+			      "hclk", "pm";
+		max-functions = /bits/ 8 <8>;
+		num-lanes = <4>;
+		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
+			 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
+			 <&cru SRST_A_PCIE>;
+		reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+			      "pm", "pclk", "aclk";
+		phys = <&pcie_phy 0>, <&pcie_phy 1>,
+		       <&pcie_phy 2>, <&pcie_phy 3>;
+		phy-names = "pcie-phy-0", "pcie-phy-1",
+			    "pcie-phy-2", "pcie-phy-3";
+		rockchip,max-outbound-regions = <32>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_clkreqnb_cpm>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@fe300000 {
+		compatible = "rockchip,rk3399-gmac";
+		reg = <0x0 0xfe300000 0x0 0x10000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq";
+		clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+			 <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+			 <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+			 <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_ref",
+			      "clk_mac_refout", "aclk_mac",
+			      "pclk_mac";
+		power-domains = <&power RK3399_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,txpbl = <0x4>;
+		status = "disabled";
+	};
+
+	sdio0: mmc@fe310000 {
+		compatible = "rockchip,rk3399-dw-mshc",
+			     "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe310000 0x0 0x4000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		resets = <&cru SRST_SDIO0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdmmc: mmc@fe320000 {
+		compatible = "rockchip,rk3399-dw-mshc",
+			     "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe320000 0x0 0x4000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
+		max-frequency = <150000000>;
+		assigned-clocks = <&cru HCLK_SD>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		power-domains = <&power RK3399_PD_SD>;
+		resets = <&cru SRST_SDMMC>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdhci: mmc@fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
+		arasan,soc-ctl-syscon = <&grf>;
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		clock-output-names = "emmc_cardclock";
+		#clock-cells = <0>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		power-domains = <&power RK3399_PD_EMMC>;
+		disable-cqe-dcmd;
+		status = "disabled";
+	};
+
+	usb_host0_ehci: usb@fe380000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfe380000 0x0 0x20000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+			 <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fe3a0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfe3a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
+			 <&u2phy0>;
+		phys = <&u2phy0_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fe3c0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfe3c0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+			 <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fe3e0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfe3e0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
+			 <&u2phy1>;
+		phys = <&u2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	debug@fe430000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe430000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l0>;
+	};
+
+	debug@fe432000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe432000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l1>;
+	};
+
+	debug@fe434000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe434000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l2>;
+	};
+
+	debug@fe436000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe436000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_L>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_l3>;
+	};
+
+	debug@fe610000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe610000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_B>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_b0>;
+	};
+
+	debug@fe710000 {
+		compatible = "arm,coresight-cpu-debug", "arm,primecell";
+		reg = <0 0xfe710000 0 0x1000>;
+		clocks = <&cru PCLK_COREDBG_B>;
+		clock-names = "apb_pclk";
+		cpu = <&cpu_b1>;
+	};
+
+	usbdrd3_0: usb@fe800000 {
+		compatible = "rockchip,rk3399-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
+		resets = <&cru SRST_A_USB3_OTG0>;
+		reset-names = "usb3-otg";
+		status = "disabled";
+
+		usbdrd_dwc3_0: usb@fe800000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe800000 0x0 0x100000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+				 <&cru SCLK_USB3OTG0_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "otg";
+			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
+			status = "disabled";
+		};
+	};
+
+	usbdrd3_1: usb@fe900000 {
+		compatible = "rockchip,rk3399-dwc3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
+			 <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk", "aclk_usb3_rksoc_axi_perf",
+			      "aclk_usb3", "grf_clk";
+		resets = <&cru SRST_A_USB3_OTG1>;
+		reset-names = "usb3-otg";
+		status = "disabled";
+
+		usbdrd_dwc3_1: usb@fe900000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xfe900000 0x0 0x100000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+				 <&cru SCLK_USB3OTG1_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
+			dr_mode = "otg";
+			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			power-domains = <&power RK3399_PD_USB3>;
+			status = "disabled";
+		};
+	};
+
+	cdn_dp: dp@fec00000 {
+		compatible = "rockchip,rk3399-cdn-dp";
+		reg = <0x0 0xfec00000 0x0 0x100000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
+		assigned-clock-rates = <100000000>, <200000000>;
+		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+		clock-names = "core-clk", "pclk", "spdif", "grf";
+		phys = <&tcphy0_dp>, <&tcphy1_dp>;
+		power-domains = <&power RK3399_PD_HDCP>;
+		resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+			 <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+		reset-names = "spdif", "dptx", "apb", "core";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <1>;
+		status = "disabled";
+
+		ports {
+			dp_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dp>;
+				};
+
+				dp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dp>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@fee00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <4>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+
+		reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
+		      <0x0 0xfef00000 0 0xc0000>, /* GICR */
+		      <0x0 0xfff00000 0 0x10000>, /* GICC */
+		      <0x0 0xfff10000 0 0x10000>, /* GICH */
+		      <0x0 0xfff20000 0 0x10000>; /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		its: msi-controller@fee20000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			#msi-cells = <1>;
+			reg = <0x0 0xfee20000 0x0 0x20000>;
+		};
+
+		ppi-partitions {
+			ppi_cluster0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_cluster1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1>;
+			};
+		};
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,rk3399-saradc";
+		reg = <0x0 0xff100000 0x0 0x100>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	crypto0: crypto@ff8b0000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
+		reset-names = "master", "slave", "crypto-rst";
+	};
+
+	crypto1: crypto@ff8b8000 {
+		compatible = "rockchip,rk3399-crypto";
+		reg = <0x0 0xff8b8000 0x0 0x4000>;
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
+		clock-names = "hclk_master", "hclk_slave", "sclk";
+		resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
+		reset-names = "master", "slave", "crypto-rst";
+	};
+
+	i2c1: i2c@ff110000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff110000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C1>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff120000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff120000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C2>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff130000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff130000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C3>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff140000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff140000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C5>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@ff150000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff150000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C6>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@ff160000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff160000 0x0 0x1000>;
+		assigned-clocks = <&cru SCLK_I2C7>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff180000 0x0 0x100>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff190000 0x0 0x100>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff1a0000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1a0000 0x0 0x100>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2c_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff1b0000 0x0 0x100>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	spi0: spi@ff1c0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1c0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 10>, <&dmac_peri 11>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff1d0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1d0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 12>, <&dmac_peri 13>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff1e0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1e0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 14>, <&dmac_peri 15>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@ff1f0000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff1f0000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_peri 18>, <&dmac_peri 19>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi5: spi@ff200000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff200000 0x0 0x1000>;
+		clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 8>, <&dmac_bus 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_alert0: gpu_alert0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@ff260000 {
+		compatible = "rockchip,rk3399-tsadc";
+		reg = <0x0 0xff260000 0x0 0x100>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <750000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_pin>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_pin>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	qos_emmc: qos@ffa58000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa58000 0x0 0x20>;
+	};
+
+	qos_gmac: qos@ffa5c000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa5c000 0x0 0x20>;
+	};
+
+	qos_pcie: qos@ffa60080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa60080 0x0 0x20>;
+	};
+
+	qos_usb_host0: qos@ffa60100 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa60100 0x0 0x20>;
+	};
+
+	qos_usb_host1: qos@ffa60180 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa60180 0x0 0x20>;
+	};
+
+	qos_usb_otg0: qos@ffa70000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa70000 0x0 0x20>;
+	};
+
+	qos_usb_otg1: qos@ffa70080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa70080 0x0 0x20>;
+	};
+
+	qos_sd: qos@ffa74000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa74000 0x0 0x20>;
+	};
+
+	qos_sdioaudio: qos@ffa76000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa76000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@ffa90000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa90000 0x0 0x20>;
+	};
+
+	qos_iep: qos@ffa98000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffa98000 0x0 0x20>;
+	};
+
+	qos_isp0_m0: qos@ffaa0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa0000 0x0 0x20>;
+	};
+
+	qos_isp0_m1: qos@ffaa0080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa0080 0x0 0x20>;
+	};
+
+	qos_isp1_m0: qos@ffaa8000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa8000 0x0 0x20>;
+	};
+
+	qos_isp1_m1: qos@ffaa8080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffaa8080 0x0 0x20>;
+	};
+
+	qos_rga_r: qos@ffab0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffab0000 0x0 0x20>;
+	};
+
+	qos_rga_w: qos@ffab0080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffab0080 0x0 0x20>;
+	};
+
+	qos_video_m0: qos@ffab8000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffab8000 0x0 0x20>;
+	};
+
+	qos_video_m1_r: qos@ffac0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac0000 0x0 0x20>;
+	};
+
+	qos_video_m1_w: qos@ffac0080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac0080 0x0 0x20>;
+	};
+
+	qos_vop_big_r: qos@ffac8000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac8000 0x0 0x20>;
+	};
+
+	qos_vop_big_w: qos@ffac8080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffac8080 0x0 0x20>;
+	};
+
+	qos_vop_little: qos@ffad0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffad0000 0x0 0x20>;
+	};
+
+	qos_perihp: qos@ffad8080 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffad8080 0x0 0x20>;
+	};
+
+	qos_gpu: qos@ffae0000 {
+		compatible = "rockchip,rk3399-qos", "syscon";
+		reg = <0x0 0xffae0000 0x0 0x20>;
+	};
+
+	pmu: power-management@ff310000 {
+		compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xff310000 0x0 0x1000>;
+
+		/*
+		 * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+		 * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+		 * Some of the power domains are grouped together for every
+		 * voltage domain.
+		 * The detail contents as below.
+		 */
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_CENTER */
+			power-domain@RK3399_PD_IEP {
+				reg = <RK3399_PD_IEP>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru HCLK_IEP>;
+				pm_qos = <&qos_iep>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_RGA {
+				reg = <RK3399_PD_RGA>;
+				clocks = <&cru ACLK_RGA>,
+					 <&cru HCLK_RGA>;
+				pm_qos = <&qos_rga_r>,
+					 <&qos_rga_w>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_VCODEC {
+				reg = <RK3399_PD_VCODEC>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+				pm_qos = <&qos_video_m0>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_VDU {
+				reg = <RK3399_PD_VDU>;
+				clocks = <&cru ACLK_VDU>,
+					 <&cru HCLK_VDU>,
+					 <&cru SCLK_VDU_CA>,
+					 <&cru SCLK_VDU_CORE>;
+				pm_qos = <&qos_video_m1_r>,
+					 <&qos_video_m1_w>;
+				#power-domain-cells = <0>;
+			};
+
+			/* These power domains are grouped by VD_GPU */
+			power-domain@RK3399_PD_GPU {
+				reg = <RK3399_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@RK3399_PD_EDP {
+				reg = <RK3399_PD_EDP>;
+				clocks = <&cru PCLK_EDP_CTRL>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_EMMC {
+				reg = <RK3399_PD_EMMC>;
+				clocks = <&cru ACLK_EMMC>;
+				pm_qos = <&qos_emmc>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_GMAC {
+				reg = <RK3399_PD_GMAC>;
+				clocks = <&cru ACLK_GMAC>,
+					 <&cru PCLK_GMAC>;
+				pm_qos = <&qos_gmac>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_SD {
+				reg = <RK3399_PD_SD>;
+				clocks = <&cru HCLK_SDMMC>,
+					 <&cru SCLK_SDMMC>;
+				pm_qos = <&qos_sd>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_SDIOAUDIO {
+				reg = <RK3399_PD_SDIOAUDIO>;
+				clocks = <&cru HCLK_SDIO>;
+				pm_qos = <&qos_sdioaudio>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_TCPD0 {
+				reg = <RK3399_PD_TCPD0>;
+				clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+					 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_TCPD1 {
+				reg = <RK3399_PD_TCPD1>;
+				clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+					 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_USB3 {
+				reg = <RK3399_PD_USB3>;
+				clocks = <&cru ACLK_USB3>;
+				pm_qos = <&qos_usb_otg0>,
+					 <&qos_usb_otg1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3399_PD_VIO {
+				reg = <RK3399_PD_VIO>;
+				#power-domain-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				power-domain@RK3399_PD_HDCP {
+					reg = <RK3399_PD_HDCP>;
+					clocks = <&cru ACLK_HDCP>,
+						 <&cru HCLK_HDCP>,
+						 <&cru PCLK_HDCP>;
+					pm_qos = <&qos_hdcp>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3399_PD_ISP0 {
+					reg = <RK3399_PD_ISP0>;
+					clocks = <&cru ACLK_ISP0>,
+						 <&cru HCLK_ISP0>;
+					pm_qos = <&qos_isp0_m0>,
+						 <&qos_isp0_m1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3399_PD_ISP1 {
+					reg = <RK3399_PD_ISP1>;
+					clocks = <&cru ACLK_ISP1>,
+						 <&cru HCLK_ISP1>;
+					pm_qos = <&qos_isp1_m0>,
+						 <&qos_isp1_m1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3399_PD_VO {
+					reg = <RK3399_PD_VO>;
+					#power-domain-cells = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@RK3399_PD_VOPB {
+						reg = <RK3399_PD_VOPB>;
+						clocks = <&cru ACLK_VOP0>,
+							 <&cru HCLK_VOP0>;
+						pm_qos = <&qos_vop_big_r>,
+							 <&qos_vop_big_w>;
+						#power-domain-cells = <0>;
+					};
+					power-domain@RK3399_PD_VOPL {
+						reg = <RK3399_PD_VOPL>;
+						clocks = <&cru ACLK_VOP1>,
+							 <&cru HCLK_VOP1>;
+						pm_qos = <&qos_vop_little>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+		};
+	};
+
+	pmugrf: syscon@ff320000 {
+		compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xff320000 0x0 0x1000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3399-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	spi3: spi@ff350000 {
+		compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xff350000 0x0 0x1000>;
+		clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff370000 {
+		compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff370000 0x0 0x100>;
+		clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff3c0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3c0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff3d0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3d0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@ff3e0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3e0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff420000 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff420010 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff420020 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420020 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff420030 {
+		compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff420030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3a_pin>;
+		clocks = <&pmucru PCLK_RKPWM_PMU>;
+		status = "disabled";
+	};
+
+	dfi: dfi@ff630000 {
+		reg = <0x00 0xff630000 0x00 0x4000>;
+		compatible = "rockchip,rk3399-dfi";
+		rockchip,pmu = <&pmugrf>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DDR_MON>;
+		clock-names = "pclk_ddr_mon";
+		status = "disabled";
+	};
+
+	vpu: video-codec@ff650000 {
+		compatible = "rockchip,rk3399-vpu";
+		reg = <0x0 0xff650000 0x0 0x800>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "vepu", "vdpu";
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vpu_mmu>;
+		power-domains = <&power RK3399_PD_VCODEC>;
+	};
+
+	vpu_mmu: iommu@ff650800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff650800 0x0 0x40>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_VCODEC>;
+	};
+
+	vdec: video-codec@ff660000 {
+		compatible = "rockchip,rk3399-vdec";
+		reg = <0x0 0xff660000 0x0 0x480>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
+			 <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		iommus = <&vdec_mmu>;
+		power-domains = <&power RK3399_PD_VDU>;
+	};
+
+	vdec_mmu: iommu@ff660480 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VDU>;
+		#iommu-cells = <0>;
+	};
+
+	iep_mmu: iommu@ff670800 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff670800 0x0 0x40>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	rga: rga@ff680000 {
+		compatible = "rockchip,rk3399-rga";
+		reg = <0x0 0xff680000 0x0 0x10000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3399_PD_RGA>;
+	};
+
+	efuse0: efuse@ff690000 {
+		compatible = "rockchip,rk3399-efuse";
+		reg = <0x0 0xff690000 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE1024NS>;
+		clock-names = "pclk_efuse";
+
+		/* Data cells */
+		cpu_id: cpu-id@7 {
+			reg = <0x07 0x10>;
+		};
+		cpub_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+		gpu_leakage: gpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+		center_leakage: center-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+		cpul_leakage: cpu-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+		logic_leakage: logic-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+		wafer_info: wafer-info@1c {
+			reg = <0x1c 0x1>;
+		};
+	};
+
+	dmac_bus: dma-controller@ff6d0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff6d0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0_PERILP>;
+		clock-names = "apb_pclk";
+	};
+
+	dmac_peri: dma-controller@ff6e0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff6e0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
+		#dma-cells = <1>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1_PERILP>;
+		clock-names = "apb_pclk";
+	};
+
+	pmucru: clock-controller@ff750000 {
+		compatible = "rockchip,rk3399-pmucru";
+		reg = <0x0 0xff750000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&pmugrf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&pmucru PLL_PPLL>;
+		assigned-clock-rates = <676000000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3399-cru";
+		reg = <0x0 0xff760000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks =
+			<&cru PLL_GPLL>, <&cru PLL_CPLL>,
+			<&cru PLL_NPLL>,
+			<&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
+			<&cru PCLK_PERIHP>,
+			<&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
+			<&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
+			<&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
+			<&cru ACLK_VIO>, <&cru ACLK_HDCP>,
+			<&cru ACLK_GIC_PRE>,
+			<&cru PCLK_DDR>,
+			<&cru ACLK_VDU>;
+		assigned-clock-rates =
+			 <594000000>,  <800000000>,
+			<1000000000>,
+			 <150000000>,   <75000000>,
+			  <37500000>,
+			 <100000000>,  <100000000>,
+			  <50000000>, <600000000>,
+			 <100000000>,   <50000000>,
+			 <400000000>, <400000000>,
+			 <200000000>,
+			 <200000000>,
+			 <400000000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xff770000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		io_domains: io-domains {
+			compatible = "rockchip,rk3399-io-voltage-domain";
+			status = "disabled";
+		};
+
+		mipi_dphy_rx0: mipi-dphy-rx0 {
+			compatible = "rockchip,rk3399-mipi-dphy-rx0";
+			clocks = <&cru SCLK_MIPIDPHY_REF>,
+				 <&cru SCLK_DPHY_RX0_CFG>,
+				 <&cru PCLK_VIO_GRF>;
+			clock-names = "dphy-ref", "dphy-cfg", "grf";
+			power-domains = <&power RK3399_PD_VIO>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		u2phy0: usb2phy@e450 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe450 0x10>;
+			clocks = <&cru SCLK_USB2PHY0_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy0_480m";
+			status = "disabled";
+
+			u2phy0_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy0_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		u2phy1: usb2phy@e460 {
+			compatible = "rockchip,rk3399-usb2phy";
+			reg = <0xe460 0x10>;
+			clocks = <&cru SCLK_USB2PHY1_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			clock-output-names = "clk_usbphy1_480m";
+			status = "disabled";
+
+			u2phy1_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy1_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+
+		emmc_phy: phy@f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x24>;
+			clocks = <&sdhci>;
+			clock-names = "emmcclk";
+			drive-impedance-ohm = <50>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		pcie_phy: pcie-phy {
+			compatible = "rockchip,rk3399-pcie-phy";
+			clocks = <&cru SCLK_PCIEPHY_REF>;
+			clock-names = "refclk";
+			#phy-cells = <1>;
+			resets = <&cru SRST_PCIEPHY>;
+			reset-names = "phy";
+			status = "disabled";
+		};
+	};
+
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD0>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		power-domains = <&power RK3399_PD_TCPD1>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	watchdog@ff848000 {
+		compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
+		reg = <0x0 0xff848000 0x0 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	rktimer: rktimer@ff850000 {
+		compatible = "rockchip,rk3399-timer";
+		reg = <0x0 0xff850000 0x0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
+	spdif: spdif@ff870000 {
+		compatible = "rockchip,rk3399-spdif";
+		reg = <0x0 0xff870000 0x0 0x1000>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 7>;
+		dma-names = "tx";
+		clock-names = "mclk", "hclk";
+		clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s0: i2s@ff880000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff880000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 0>, <&dmac_bus 1>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
+		pinctrl-names = "bclk_on", "bclk_off";
+		pinctrl-0 = <&i2s0_8ch_bus>;
+		pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@ff890000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff890000 0x0 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 2>, <&dmac_bus 3>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_2ch_bus>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@ff8a0000 {
+		compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xff8a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
+		dmas = <&dmac_bus 4>, <&dmac_bus 5>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
+		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff8f0000 {
+		compatible = "rockchip,rk3399-vop-lit";
+		reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopl_mmu>;
+		power-domains = <&power RK3399_PD_VOPL>;
+		resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_mipi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
+			vopl_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+
+			vopl_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopl>;
+			};
+
+			vopl_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopl>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff8f3f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff8f3f00 0x0 0x100>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VOPL>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopb: vop@ff900000 {
+		compatible = "rockchip,rk3399-vop-big";
+		reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		assigned-clock-rates = <400000000>, <100000000>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		iommus = <&vopb_mmu>;
+		power-domains = <&power RK3399_PD_VOPB>;
+		resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
+		reset-names = "axi", "ahb", "dclk";
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
+
+			vopb_out_hdmi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+
+			vopb_out_mipi1: endpoint@3 {
+				reg = <3>;
+				remote-endpoint = <&mipi1_in_vopb>;
+			};
+
+			vopb_out_dp: endpoint@4 {
+				reg = <4>;
+				remote-endpoint = <&dp_in_vopb>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff903f00 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff903f00 0x0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3399_PD_VOPB>;
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	isp0: isp0@ff910000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff910000 0x0 0x4000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP0>,
+			 <&cru ACLK_ISP0_WRAPPER>,
+			 <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "isp", "aclk", "hclk";
+		iommus = <&isp0_mmu>;
+		phys = <&mipi_dphy_rx0>;
+		phy-names = "dphy";
+		power-domains = <&power RK3399_PD_ISP0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp0_mmu: iommu@ff914000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP0>;
+		rockchip,disable-mmu-reset;
+	};
+
+	isp1: isp1@ff920000 {
+		compatible = "rockchip,rk3399-cif-isp";
+		reg = <0x0 0xff920000 0x0 0x4000>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_ISP1>,
+			 <&cru ACLK_ISP1_WRAPPER>,
+			 <&cru HCLK_ISP1_WRAPPER>;
+		clock-names = "isp", "aclk", "hclk";
+		iommus = <&isp1_mmu>;
+		phys = <&mipi_dsi1>;
+		phy-names = "dphy";
+		power-domains = <&power RK3399_PD_ISP1>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp1_mmu: iommu@ff924000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3399_PD_ISP1>;
+		rockchip,disable-mmu-reset;
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "hdmi-sound";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
+	hdmi: hdmi@ff940000 {
+		compatible = "rockchip,rk3399-dw-hdmi";
+		reg = <0x0 0xff940000 0x0 0x20000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_HDMI_CTRL>,
+			 <&cru SCLK_HDMI_SFR>,
+			 <&cru SCLK_HDMI_CEC>,
+			 <&cru PCLK_VIO_GRF>,
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "ref";
+		power-domains = <&power RK3399_PD_HDCP>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	mipi_dsi: dsi@ff960000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff960000 0x0 0x8000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
+			 <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI0>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+
+			mipi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	mipi_dsi1: dsi@ff968000 {
+		compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xff968000 0x0 0x8000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
+			 <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
+		clock-names = "ref", "pclk", "phy_cfg", "grf";
+		power-domains = <&power RK3399_PD_VIO>;
+		resets = <&cru SRST_P_MIPI_DSI1>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#phy-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mipi1_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mipi1_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi1>;
+				};
+
+				mipi1_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi1>;
+				};
+			};
+
+			mipi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	edp: dp@ff970000 {
+		compatible = "rockchip,rk3399-edp";
+		reg = <0x0 0xff970000 0x0 0x8000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "dp", "pclk", "grf";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_hpd>;
+		power-domains = <&power RK3399_PD_EDP>;
+		resets = <&cru SRST_P_EDP_CTRL>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+
+			edp_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	gpu: gpu@ff9a0000 {
+		compatible = "rockchip,rk3399-mali", "arm,mali-t860";
+		reg = <0x0 0xff9a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru ACLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power RK3399_PD_GPU>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3399-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@ff720000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff720000 0x0 0x100>;
+			clocks = <&pmucru PCLK_GPIO0_PMU>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio1: gpio@ff730000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff730000 0x0 0x100>;
+			clocks = <&pmucru PCLK_GPIO1_PMU>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio2: gpio@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff780000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO2>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio3: gpio@ff788000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff788000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO3>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		gpio4: gpio@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff790000 0x0 0x100>;
+			clocks = <&cru PCLK_GPIO4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			gpio-controller;
+			#gpio-cells = <0x2>;
+
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+			bias-disable;
+			drive-strength = <13>;
+		};
+
+		pcfg_pull_none_18ma: pcfg-pull-none-18ma {
+			bias-disable;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_none_20ma: pcfg-pull-none-20ma {
+			bias-disable;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_18ma: pcfg-pull-up-18ma {
+			bias-pull-up;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_up_20ma: pcfg-pull-up-20ma {
+			bias-pull-up;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+			bias-pull-down;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+			bias-pull-down;
+			drive-strength = <12>;
+		};
+
+		pcfg_pull_down_18ma: pcfg-pull-down-18ma {
+			bias-pull-down;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_down_20ma: pcfg-pull-down-20ma {
+			bias-pull-down;
+			drive-strength = <20>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
+		};
+
+		pcfg_input_enable: pcfg-input-enable {
+			input-enable;
+		};
+
+		pcfg_input_pull_up: pcfg-input-pull-up {
+			input-enable;
+			bias-pull-up;
+		};
+
+		pcfg_input_pull_down: pcfg-input-pull-down {
+			input-enable;
+			bias-pull-down;
+		};
+
+		clock {
+			clk_32k: clk-32k {
+				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
+			};
+		};
+
+		cif {
+			cif_clkin: cif-clkin {
+				rockchip,pins =
+					<2 RK_PB2 3 &pcfg_pull_none>;
+			};
+
+			cif_clkouta: cif-clkouta {
+				rockchip,pins =
+					<2 RK_PB3 3 &pcfg_pull_none>;
+			};
+		};
+
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins =
+					<4 RK_PC7 2 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 RK_PC1 1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 RK_PB6 1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 RK_PB5 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 RK_PB1 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 RK_PB0 1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 RK_PA7 1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 RK_PA6 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 RK_PA4 1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 RK_PA3 1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 RK_PA2 1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 RK_PA1 1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 RK_PA0 1 &pcfg_pull_none_13ma>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins =
+					/* mac_mdio */
+					<3 RK_PB5 1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 RK_PB4 1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 RK_PB3 1 &pcfg_pull_none>,
+					/* mac_rxer */
+					<3 RK_PB2 1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 RK_PB1 1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 RK_PB0 1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 RK_PA7 1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 RK_PA6 1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 RK_PA5 1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 RK_PA4 1 &pcfg_pull_none_13ma>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins =
+					<1 RK_PB7 2 &pcfg_pull_none>,
+					<1 RK_PC0 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins =
+					<4 RK_PA2 1 &pcfg_pull_none>,
+					<4 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins =
+					<2 RK_PA1 2 &pcfg_pull_none_12ma>,
+					<2 RK_PA0 2 &pcfg_pull_none_12ma>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins =
+					<4 RK_PC1 1 &pcfg_pull_none>,
+					<4 RK_PC0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins =
+					<1 RK_PB4 1 &pcfg_pull_none>,
+					<1 RK_PB3 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins =
+					<3 RK_PB3 2 &pcfg_pull_none>,
+					<3 RK_PB2 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c6 {
+			i2c6_xfer: i2c6-xfer {
+				rockchip,pins =
+					<2 RK_PB2 2 &pcfg_pull_none>,
+					<2 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c7 {
+			i2c7_xfer: i2c7-xfer {
+				rockchip,pins =
+					<2 RK_PB0 2 &pcfg_pull_none>,
+					<2 RK_PA7 2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c8 {
+			i2c8_xfer: i2c8-xfer {
+				rockchip,pins =
+					<1 RK_PC5 1 &pcfg_pull_none>,
+					<1 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_2ch_bus: i2s0-2ch-bus {
+				rockchip,pins =
+					<3 RK_PD0 1 &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_bus: i2s0-8ch-bus {
+				rockchip,pins =
+					<3 RK_PD0 1 &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD4 1 &pcfg_pull_none>,
+					<3 RK_PD5 1 &pcfg_pull_none>,
+					<3 RK_PD6 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
+				rockchip,pins =
+					<3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
+					<3 RK_PD1 1 &pcfg_pull_none>,
+					<3 RK_PD2 1 &pcfg_pull_none>,
+					<3 RK_PD3 1 &pcfg_pull_none>,
+					<3 RK_PD4 1 &pcfg_pull_none>,
+					<3 RK_PD5 1 &pcfg_pull_none>,
+					<3 RK_PD6 1 &pcfg_pull_none>,
+					<3 RK_PD7 1 &pcfg_pull_none>,
+					<4 RK_PA0 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s1 {
+			i2s1_2ch_bus: i2s1-2ch-bus {
+				rockchip,pins =
+					<4 RK_PA3 1 &pcfg_pull_none>,
+					<4 RK_PA4 1 &pcfg_pull_none>,
+					<4 RK_PA5 1 &pcfg_pull_none>,
+					<4 RK_PA6 1 &pcfg_pull_none>,
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+
+			i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
+				rockchip,pins =
+					<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PA4 1 &pcfg_pull_none>,
+					<4 RK_PA5 1 &pcfg_pull_none>,
+					<4 RK_PA6 1 &pcfg_pull_none>,
+					<4 RK_PA7 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins =
+					<2 RK_PC4 1 &pcfg_pull_up>,
+					<2 RK_PC5 1 &pcfg_pull_up>,
+					<2 RK_PC6 1 &pcfg_pull_up>,
+					<2 RK_PC7 1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins =
+					<2 RK_PD0 1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins =
+					<2 RK_PD1 1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins =
+					<2 RK_PD2 1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins =
+					<2 RK_PD3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins =
+					<2 RK_PD4 1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins =
+					<0 RK_PA3 1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins =
+					<0 RK_PA4 1 &pcfg_pull_up>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins =
+					<4 RK_PB0 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins =
+					<4 RK_PB0 1 &pcfg_pull_up>,
+					<4 RK_PB1 1 &pcfg_pull_up>,
+					<4 RK_PB2 1 &pcfg_pull_up>,
+					<4 RK_PB3 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins =
+					<4 RK_PB4 1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins =
+					<4 RK_PB5 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmmc-cd {
+				rockchip,pins =
+					<0 RK_PA7 1 &pcfg_pull_up>;
+			};
+
+			sdmmc_wp: sdmmc-wp {
+				rockchip,pins =
+					<0 RK_PB0 1 &pcfg_pull_up>;
+			};
+		};
+
+		suspend {
+			ap_pwroff: ap-pwroff {
+				rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
+			};
+		};
+
+		spdif {
+			spdif_bus: spdif-bus {
+				rockchip,pins =
+					<4 RK_PC5 1 &pcfg_pull_none>;
+			};
+
+			spdif_bus_1: spdif-bus-1 {
+				rockchip,pins =
+					<3 RK_PC0 3 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins =
+					<3 RK_PA6 2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins =
+					<3 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins =
+					<3 RK_PB0 2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins =
+					<3 RK_PA5 2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins =
+					<3 RK_PA4 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins =
+					<1 RK_PB1 2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins =
+					<1 RK_PB2 2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins =
+					<1 RK_PA7 2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins =
+					<1 RK_PB0 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_clk: spi2-clk {
+				rockchip,pins =
+					<2 RK_PB3 1 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins =
+					<2 RK_PB4 1 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins =
+					<2 RK_PB1 1 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins =
+					<2 RK_PB2 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi3 {
+			spi3_clk: spi3-clk {
+				rockchip,pins =
+					<1 RK_PC1 1 &pcfg_pull_up>;
+			};
+			spi3_cs0: spi3-cs0 {
+				rockchip,pins =
+					<1 RK_PC2 1 &pcfg_pull_up>;
+			};
+			spi3_rx: spi3-rx {
+				rockchip,pins =
+					<1 RK_PB7 1 &pcfg_pull_up>;
+			};
+			spi3_tx: spi3-tx {
+				rockchip,pins =
+					<1 RK_PC0 1 &pcfg_pull_up>;
+			};
+		};
+
+		spi4 {
+			spi4_clk: spi4-clk {
+				rockchip,pins =
+					<3 RK_PA2 2 &pcfg_pull_up>;
+			};
+			spi4_cs0: spi4-cs0 {
+				rockchip,pins =
+					<3 RK_PA3 2 &pcfg_pull_up>;
+			};
+			spi4_rx: spi4-rx {
+				rockchip,pins =
+					<3 RK_PA0 2 &pcfg_pull_up>;
+			};
+			spi4_tx: spi4-tx {
+				rockchip,pins =
+					<3 RK_PA1 2 &pcfg_pull_up>;
+			};
+		};
+
+		spi5 {
+			spi5_clk: spi5-clk {
+				rockchip,pins =
+					<2 RK_PC6 2 &pcfg_pull_up>;
+			};
+			spi5_cs0: spi5-cs0 {
+				rockchip,pins =
+					<2 RK_PC7 2 &pcfg_pull_up>;
+			};
+			spi5_rx: spi5-rx {
+				rockchip,pins =
+					<2 RK_PC4 2 &pcfg_pull_up>;
+			};
+			spi5_tx: spi5-tx {
+				rockchip,pins =
+					<2 RK_PC5 2 &pcfg_pull_up>;
+			};
+		};
+
+		testclk {
+			test_clkout0: test-clkout0 {
+				rockchip,pins =
+					<0 RK_PA0 1 &pcfg_pull_none>;
+			};
+
+			test_clkout1: test-clkout1 {
+				rockchip,pins =
+					<2 RK_PD1 2 &pcfg_pull_none>;
+			};
+
+			test_clkout2: test-clkout2 {
+				rockchip,pins =
+					<0 RK_PB0 3 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_pin: otp-pin {
+				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins =
+					<2 RK_PC0 1 &pcfg_pull_up>,
+					<2 RK_PC1 1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins =
+					<2 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins =
+					<2 RK_PC3 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins =
+					<3 RK_PB4 2 &pcfg_pull_up>,
+					<3 RK_PB5 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2a {
+			uart2a_xfer: uart2a-xfer {
+				rockchip,pins =
+					<4 RK_PB0 2 &pcfg_pull_up>,
+					<4 RK_PB1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2b {
+			uart2b_xfer: uart2b-xfer {
+				rockchip,pins =
+					<4 RK_PC0 2 &pcfg_pull_up>,
+					<4 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart2c {
+			uart2c_xfer: uart2c-xfer {
+				rockchip,pins =
+					<4 RK_PC3 1 &pcfg_pull_up>,
+					<4 RK_PC4 1 &pcfg_pull_none>;
+			};
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins =
+					<3 RK_PB6 2 &pcfg_pull_up>,
+					<3 RK_PB7 2 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins =
+					<3 RK_PC0 2 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins =
+					<3 RK_PC1 2 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins =
+					<1 RK_PA7 1 &pcfg_pull_up>,
+					<1 RK_PB0 1 &pcfg_pull_none>;
+			};
+		};
+
+		uarthdcp {
+			uarthdcp_xfer: uarthdcp-xfer {
+				rockchip,pins =
+					<4 RK_PC5 2 &pcfg_pull_up>,
+					<4 RK_PC6 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins =
+					<4 RK_PC2 1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC2 1 &pcfg_pull_down>;
+			};
+
+			vop0_pwm_pin: vop0-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 2 &pcfg_pull_none>;
+			};
+
+			vop1_pwm_pin: vop1-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins =
+					<4 RK_PC6 1 &pcfg_pull_none>;
+			};
+
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC6 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<1 RK_PC3 1 &pcfg_pull_down>;
+			};
+		};
+
+		pwm3a {
+			pwm3a_pin: pwm3a-pin {
+				rockchip,pins =
+					<0 RK_PA6 1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3b {
+			pwm3b_pin: pwm3b-pin {
+				rockchip,pins =
+					<1 RK_PB6 1 &pcfg_pull_none>;
+			};
+		};
+
+		hdmi {
+			hdmi_i2c_xfer: hdmi-i2c-xfer {
+				rockchip,pins =
+					<4 RK_PC1 3 &pcfg_pull_none>,
+					<4 RK_PC0 3 &pcfg_pull_none>;
+			};
+
+			hdmi_cec: hdmi-cec {
+				rockchip,pins =
+					<4 RK_PC7 1 &pcfg_pull_none>;
+			};
+		};
+
+		pcie {
+			pcie_clkreqn_cpm: pci-clkreqn-cpm {
+				rockchip,pins =
+					<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
+				rockchip,pins =
+					<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
new file mode 100644
index 000000000..c58fb7658
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include <arm/rockchip/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
+		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 000000000..8b8992a8e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	vcc3v3_pcie: vcc-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	phy-supply = <&vcc_lan>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdio_pwrseq {
+	/*
+	 * On the module itself this is one of these (depending
+	 * on the actual card populated):
+	 * - SDIO_RESET_L_WL_REG_ON
+	 * - PDN (power down when low)
+	 */
+	reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
new file mode 100644
index 000000000..bb5ebf660
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+
+#include "rk3399.dtsi"
+
+/ {
+	compatible = "rockchip,rk3399pro";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie_phy {
+	status = "okay";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
new file mode 100644
index 000000000..8aa93c646
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353P";
+	compatible = "anbernic,rg353p", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+
+	touch@1a {
+		compatible = "hynitron,cst340";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&touch_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <640>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_rst: touch-rst {
+			rockchip,pins =
+				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts
new file mode 100644
index 000000000..b211973e3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353PS";
+	compatible = "anbernic,rg353ps", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&panel {
+	compatible = "anbernic,rg353v-panel-v2";
+	iovcc-supply = <&vcc3v3_lcd0_n>;
+	vcc-supply = <&vcc3v3_lcd0_n>;
+	/delete-property/ vdd-supply;
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
new file mode 100644
index 000000000..f49ce29ba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353V";
+	compatible = "anbernic,rg353v", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+
+	touch@1a {
+		compatible = "hynitron,cst340";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&touch_rst>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <640>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&pinctrl {
+	touch {
+		touch_rst: touch-rst {
+			rockchip,pins =
+				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts
new file mode 100644
index 000000000..a7dc462fe
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+	model = "RG353VS";
+	compatible = "anbernic,rg353vs", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3151000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	/* Channels reversed for headphones. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_int";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "SPKO";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
new file mode 100644
index 000000000..2a2821f4c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <241500000>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+
+	panel: panel@0 {
+		compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+		reg = <0>;
+		backlight = <&backlight>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_rst>;
+		reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc3v3_lcd0_n>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&i2c0 {
+	/* This hardware is physically present but unused. */
+	power-monitor@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	gpio-lcd {
+		lcd_rst: lcd-rst {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
new file mode 100644
index 000000000..c763c7f3b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	model = "RG503";
+	compatible = "anbernic,rg503", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdmmc2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <3472000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <117000>;
+		voltage-max-design-microvolt = <4172000>;
+		voltage-min-design-microvolt = <3400000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =	<4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
+					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
+					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
+					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
+					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
+					<3400000 0>;
+	};
+
+	gpio_spi: spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <0>;
+
+		panel@0 {
+			compatible = "samsung,ams495qa01";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_reset>;
+			reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_3v3>;
+
+			port {
+				mipi_in_panel: endpoint {
+					remote-endpoint = <&mipi_out_panel>;
+				};
+			};
+		};
+	};
+
+	/* Channels reversed for both headphones and speakers. */
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "rk817_ext";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Internal Speakers", "Speaker Amp OUTL",
+			"Internal Speakers", "Speaker Amp OUTR",
+			"Speaker Amp INL", "HPOL",
+			"Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+};
+
+&cru {
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <500000000>;
+};
+
+&dsi_dphy0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+
+	ports {
+		dsi0_in: port@0 {
+			reg = <0>;
+
+			dsi0_in_vp1: endpoint {
+				remote-endpoint = <&vp1_out_dsi0>;
+			};
+		};
+
+		dsi0_out: port@1 {
+			reg = <1>;
+
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-r1 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-lcd {
+		lcd_reset: lcd-reset {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-spi {
+		spi_pins: spi-pins {
+			rockchip,pins =
+				<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk817 {
+	rk817_charger: charger {
+		monitored-battery = <&battery>;
+		rockchip,resistor-sense-micro-ohms = <10000>;
+		rockchip,sleep-enter-current-microamp = <300000>;
+		rockchip,sleep-filter-current-microamp = <100000>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
new file mode 100644
index 000000000..8cbf3d9a4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_keys: adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <60>;
+
+		/*
+		 * Button is mapped to F key in BSP kernel, but
+		 * according to input guidelines it should be mode.
+		 */
+		button-mode {
+			label = "MODE";
+			linux,code = <BTN_MODE>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&btn_pins_ctrl>;
+		pinctrl-names = "default";
+
+		button-b {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+	};
+
+	gpio_keys_vol: gpio-keys-vol {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&btn_pins_vol>;
+		pinctrl-names = "default";
+
+		button-vol-down {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		button-vol-up {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		ddc-i2c-bus = <&i2c5>;
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds: pwm-leds {
+		compatible = "pwm-leds";
+
+		green_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			max-brightness = <255>;
+			pwms = <&pwm6 0 25000 0>;
+		};
+
+		amber_led: led-1 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_CHARGING;
+			max-brightness = <255>;
+			pwms = <&pwm7 0 25000 0>;
+		};
+
+		red_led: led-2 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			max-brightness = <255>;
+			pwms = <&pwm0 0 25000 0>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&vcc_lcd_h>;
+		pinctrl-names = "default";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc3v3_lcd0_n";
+		vin-supply = <&vcc_3v3>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sys: regulator-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		regulator-name = "vcc_sys";
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vcc_wifi";
+	};
+
+	vibrator: pwm-vibrator {
+		compatible = "pwm-vibrator";
+		pwm-names = "enable";
+		pwms = <&pwm5 0 1000000000 0>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-0 = <&hdmitxm0_cec>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <4700000>;
+				regulator-max-microvolt = <5400000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	vdd_cpu: regulator@40 {
+		compatible = "fcs,fan53555";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-name = "vdd_cpu";
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c1 {
+	/* Unknown/unused device at 0x3c */
+	status = "disabled";
+};
+
+&i2c5 {
+	pinctrl-0 = <&i2c5m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	pinctrl-names = "default";
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-btns {
+		btn_pins_ctrl: btn-pins-ctrl {
+			rockchip,pins =
+				<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		btn_pins_vol: btn-pins-vol {
+			rockchip,pins =
+			<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+			<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	joy-mux {
+		joy_mux_en: joy-mux-en {
+			rockchip,pins =
+				<0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc3v3-lcd {
+		vcc_lcd_h: vcc-lcd-h {
+			rockchip,pins =
+				<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wifi {
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm5 {
+	status = "okay";
+};
+
+&pwm6 {
+	status = "okay";
+};
+
+&pwm7 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc1v8_dvp>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_wifi>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * Lack the schematics to verify, but port works as a peripheral
+ * (and not a host or OTG port).
+ */
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
new file mode 100644
index 000000000..0c18406e4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com
+ * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Rockchip RK3566 BOX DEMO Board";
+	compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdmmc1;
+		mmc2 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		linux,rc-map-name = "rc-beelink-gs1";
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h &wifi_32k>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	vcc12v0_dcin: regulator-vcc12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v0_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v0_dcin>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb_host: regulator-vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb2_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcca_1v8: regulator-vcca-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdda_0v9: regulator-vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vdd_fixed: regulator-vdd-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fixed";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_cpu: regulator-vdd-cpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm0 0 5000 1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 1>;
+		regulator-name = "vdd_logic";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		    &gmac1m1_tx_bus2
+		    &gmac1m1_rx_bus2
+		    &gmac1m1_rgmii_clk
+		    &gmac1m1_rgmii_bus
+		    &gmac1m1_clkinout>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&hdmi {
+	assigned-clocks = <&cru CLK_HDMI_CEC>;
+	assigned-clock-rates = <32768>;
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_h: wifi-host-wake-l {
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_32k: wifi-32k {
+			rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc_3v3>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcca_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcca_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	/* WiFi & BT combo module AMPAK AP6398S */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	clock-frequency = <150000000>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcca_1v8>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_h>;
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&pmucru CLK_RTC_32K>;
+		clock-names = "ext_clock";
+		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca_1v8>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vpu {
+	status = "okay";
+};
+
+&vdpu_mmu {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb2_otg>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
new file mode 100644
index 000000000..6ecdf5d28
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "EmbedFire LubanCat 1";
+	compatible = "embedfire,lubancat-1", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		sys_led: sys-led {
+			label = "sys_led";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sys_led_pin>;
+		};
+	};
+
+	usb_5v: usb-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&usb_5v>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		regulator-name = "vcc5v0_usb20_host";
+		regulator-always-on;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en>;
+		regulator-name = "vcc5v0_usb30_host";
+		regulator-always-on;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 75ms, 100ms */
+	snps,reset-delays-us = <0 75000 100000>;
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+			&gmac1m1_tx_bus2_level3
+			&gmac1m1_rx_bus2
+			&gmac1m1_rgmii_clk_level2
+			&gmac1m1_rgmii_bus_level3>;
+	tx_delay = <0x1a>;
+	rx_delay = <0x0c>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		sys_led_pin: sys-status-led-pin {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&sdhci {
+	assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
+	assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	supports-emmc;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	supports-sd;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+/* USB OTG/USB Host_1 USB 2.0 Comb */
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* USB Host_2/USB Host_3 USB 2.0 Comb */
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* USB3.0 Host */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
new file mode 100644
index 000000000..5b0b7ebf9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinenote.dtsi"
+
+/ {
+	model = "Pine64 PineNote v1.1";
+	compatible = "pine64,pinenote-v1.1", "pine64,pinenote", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio7-supply = <&vcc_1v8>;
+};
+
+&spk_amp {
+	VCC-supply = <&dcdc_boost>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
new file mode 100644
index 000000000..6bbc4c675
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinenote.dtsi"
+
+/ {
+	model = "Pine64 PineNote v1.2";
+	compatible = "pine64,pinenote-v1.2", "pine64,pinenote", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&spk_amp {
+	VCC-supply = <&vcc_bat>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
new file mode 100644
index 000000000..d899087bf
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		button-recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <6>;
+		#sound-dai-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&hall_int_l>;
+		pinctrl-names = "default";
+
+		switch-cover {
+			label = "cover";
+			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "PineNote";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Speaker", "Internal Speakers";
+		simple-audio-card,routing = "Headphones", "HPOL",
+					    "Headphones", "HPOR",
+					    "Internal Speakers", "Speaker Amp OUTL",
+					    "Internal Speakers", "Speaker Amp OUTR",
+					    "Speaker Amp INL", "HPOL",
+					    "Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&link0_cpu>;
+			format = "i2s";
+			frame-master = <&link0_cpu>;
+			mclk-fs = <256>;
+
+			link0_cpu: cpu {
+				sound-dai = <&i2s1_8ch>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&rk817>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&link1_cpu>;
+			format = "pdm";
+			frame-master = <&link1_cpu>;
+
+			link1_cpu: cpu {
+				sound-dai = <&pdm>;
+			};
+
+			link1_codec: codec {
+				sound-dai = <&dmic_codec>;
+			};
+		};
+	};
+
+	vbat_4g: vbat-4g {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_4g";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		/* powered by vcc_bat, enabled by vbat_4g_en */
+		vin-supply = <&vbat_4g_en>;
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* powered by vcc_sys, enabled by vcc_1v8_en */
+		vin-supply = <&vcc_1v8_en>;
+	};
+
+	vcc_bat: vcc-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_bat";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_hall_3v3: vcc-hall-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_hall_3v3";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wl_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vdda_0v9: vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		/* powered by vcc_sys, enabled by vcc_1v8_en */
+		vin-supply = <&vcc_1v8_en>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <0>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-names = "mclk";
+		#clock-cells = <1>;
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-name = "vdd_gpu_npu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_pmu: LDO_REG1 {
+				regulator-name = "vcca_1v8_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* unused */
+			vdda_0v9_ldo: LDO_REG2 {
+				regulator-name = "vdda_0v9_ldo";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda_0v9_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* unused */
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc_3v3_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8_en: LDO_REG7 {
+				regulator-name = "vcc_1v8_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vbat_4g_en: LDO_REG8 {
+				regulator-name = "vbat_4g_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			sleep_sta_ctl: LDO_REG9 {
+				regulator-name = "sleep_sta_ctl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-name = "boost";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x09>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x1>;
+		pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>;
+		pinctrl-names = "default";
+		vdd-supply = <&vcc_3v3_pmu>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+		enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&backlight_hwen_h>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			label = "backlight_cool";
+			default-brightness = <0>;
+		};
+
+		led@1 {
+			reg = <1>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+		};
+	};
+
+	wusb3801: tcpc@60 {
+		compatible = "willsemi,wusb3801";
+		reg = <0x60>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&tcpc_int_l>;
+		pinctrl-names = "default";
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			vbus-supply = <&otg_switch>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			typec-power-opmode = "default";
+			pd-disable;
+
+			ports {
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+
+				port@0 {
+					reg = <0x0>;
+
+					typec_hs_usb2phy0: endpoint {
+						remote-endpoint = <&usb2phy0_typec_hs>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	accelerometer@18 {
+		compatible = "silan,sc7a20";
+		reg = <0x18>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&accelerometer_int_l>;
+		pinctrl-names = "default";
+		st,drdy-int-pin = <1>;
+		vdd-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_3v3>;
+	};
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pdm {
+	pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>;
+	/* microphones are on channels 1 and 2 */
+	rockchip,path-map = <1>, <2>, <0>, <3>;
+	status = "okay";
+};
+
+&pinctrl {
+	accelerometer {
+		accelerometer_int_l: accelerometer-int-l {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	backlight {
+		backlight_hwen_h: backlight-hwen-h {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_pin: led-pin {
+			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hall {
+		hall_int_l: hall-int-l {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		pen_fwe: pen-fwe {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pen_irq_l: pen-irq-l {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pen_rst_l: pen-rst-l {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tcpc {
+		tcpc_int_l: tcpc-int-l {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vcc-wl {
+		vcc_wl_pin: vcc-wl-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3_pmu>;
+	pmuio2-supply = <&vcc_3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcca_1v8_pmu>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_wl>;
+	vqmmc-supply = <&vcca_1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
+		pinctrl-names = "default";
+		vbat-supply = <&vcc_wl>;
+		vddio-supply = <&vcca_1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+
+	port {
+		usb2phy0_typec_hs: endpoint {
+			remote-endpoint = <&typec_hs_usb2phy0>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
new file mode 100644
index 000000000..854d02b46
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Pine64 RK3566 Quartz64-A Board";
+	compatible = "pine64,quartz64-a", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	fan: gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      4500 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fan_en_h>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-work {
+			label = "work-led";
+			default-state = "off";
+			gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_enable_h>;
+			retain-state-suspended;
+		};
+
+		led-diy {
+			label = "diy-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&diy_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK817";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v_dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* vbus feeds the rk817 usb input.
+	 * With no battery attached, also feeds vcc_bat+
+	 * via ON/OFF_BAT jumper
+	 */
+	vbus: vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_usb: vcc5v0_usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/* all four ports are controlled by one gpio
+	 * the host ports are sourced from vcc5v0_usb
+	 * the otg port is sourced from vcc5v0_midu
+	 */
+	vcc5v0_usb20_host: vcc5v0_usb20_host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		regulator-name = "vcc5v0_usb20_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_usb20_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dcdc_boost>;
+	};
+
+	vcc3v3_sd: vcc3v3_sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_sd_h>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	/* sourced from vbus and vcc_bat+ via rk817 sw5 */
+	vcc_sys: vcc_sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		vin-supply = <&vbus>;
+	};
+
+	/* sourced from vcc_sys, sdio module operates internally at 3.3v */
+	vcc_wl: vcc_wl {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_wl";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu_thermal {
+	trips {
+		cpu_hot: cpu_hot {
+			temperature = <55000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda_0v9>;
+	avdd-1v8-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_logic";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_gpu";
+					regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-name = "vcc2v8_dvp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-name = "boost";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+/* i2c3 is exposed on con40
+ * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
+ * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	fan {
+		fan_en_h: fan-en-h {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_enable_h: work-led-enable-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_enable_h: diy-led-enable-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb2 {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc_sd {
+		vcc_sd_h: vcc-sd-h {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_wl>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&fspi_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+/* spdif is exposed on con40 pin 18 */
+&spdif {
+	status = "okay";
+};
+
+/* spi1 is exposed on con40
+ * pin 11 - spi1_mosi_m1
+ * pin 13 - spi1_miso_m1
+ * pin 15 - spi1_clk_m1
+ * pin 17 - spi1_cs0_m1
+ */
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+/* uart0 is exposed on con40
+ * pin 12 - uart0_tx
+ * pin 14 - uart0_rx
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+		max-speed = <3000000>;
+	};
+};
+
+/* uart2 is exposed on con40
+ * pin 8 - uart2_tx_m0_debug
+ * pin 10 - uart2_rx_m0_debug
+ */
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* usb3 controller is muxed with sata1 */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb20_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
new file mode 100644
index 000000000..2d92713be
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -0,0 +1,737 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Pine64 RK3566 Quartz64-B Board";
+	compatible = "pine64,quartz64-b", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "user-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+	};
+
+	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_in: vcc5v0-in-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_in";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_in>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
+		     &gmac1m1_rgmii_bus>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x24>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-boot-on;
+				regulator-name = "vcc_3v3";
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+			};
+		};
+	};
+};
+
+/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "okay";
+};
+
+/*
+ * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
+ * pin 27 - i2c4_sda_m0
+ * pin 28 - i2c4_scl_m0
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * i2c5_m0 is exposed on PI40
+ * pin 29 - i2c5_scl_m0
+ * pin 31 - i2c5_sda_m0
+ */
+&i2c5 {
+	status = "disabled";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx
+		     &i2s1m0_lrcktx
+		     &i2s1m0_sdi0
+		     &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led_enable_h: user-led-enable-h {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcca1v8_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcca1v8_pmu>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	status = "okay";
+};
+
+&sfc {
+	pinctrl-0 = <&fspi_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+/*
+ * uart2_m0 is exposed on PI40
+ * pin 8  - uart2_tx_m0
+ * pin 10 - uart2_rx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
new file mode 100644
index 000000000..1b1c67d5b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+#include "rk3566-radxa-cm3.dtsi"
+
+/ {
+	model = "Radxa Compute Module 3(CM3) IO Board";
+	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+
+	aliases {
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_ACTIVITY;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pi_nled_activity>;
+		};
+	};
+
+	vcc5v0_usb30: vcc5v0-usb30-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcca1v8_image: vcca1v8-image-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8_image";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_p>;
+	};
+
+	vdda0v9_image: vdda0v9-image-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca0v9_image";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vdda_0v9>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_rgmii_bus
+		     &gmac1m0_clkinout>;
+	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x46>;
+	rx_delay = <0x2e>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	gmac1 {
+		gmac1m0_miim: gmac1m0-miim {
+			rockchip,pins =
+				/* gmac1_mdcm0 */
+				<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_mdiom0 */
+				<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0m0 */
+				<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_rxd1m0 */
+				<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_rxdvcrsm0 */
+				<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0m0 */
+				<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txd1m0 */
+				<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txenm0 */
+				<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclkm0 */
+				<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txclkm0 */
+				<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2m0 */
+				<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_rxd3m0 */
+				<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txd2m0 */
+				<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
+				/* gmac1_txd3m0 */
+				<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
+		};
+
+		gmac1m0_clkinout: gmac1m0-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinoutm0 */
+				<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
+		};
+	};
+
+	leds {
+		pi_nled_activity: pi-nled-activity {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdcard {
+		sdmmc_pwren: sdmmc-pwren {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_en_h: vcc5v0-host-en-h {
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
new file mode 100644
index 000000000..45de2630b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Radxa Limited
+ * Copyright (c) 2022 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "radxa,cm3", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			linux,default-trigger = "timer";
+			default-state = "on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led2>;
+		};
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v8: vcc-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_p>;
+	};
+
+	vcc_3v3: vcc-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcca_1v8: vcca-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_p>;
+	};
+
+	sdio_pwrseq: pwrseq-sdio {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_npu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		clock-output-names = "rk817-clkout1", "rk817-clkout2";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-name = "vdd_gpu_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG1 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_1v8_p: LDO_REG7 {
+				regulator-name = "vcc_1v8_p";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG8 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc2v8_dvp: LDO_REG9 {
+				regulator-name = "vcc2v8_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+		};
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_host_wake_h: bt-host-wake-h {
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		user_led2: user-led2 {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_h: wifi-host-wake-h {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc_3v3>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm43455-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_h>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
new file mode 100644
index 000000000..938092fce
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Firefly Station M2";
+	compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "user-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "STATION-M2-FRONT";
+		simple-audio-card,mclk-fs = <256>;
+		status = "okay";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+
+	usb_5v: usb-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&usb_5v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x24>;
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		#sound-dai-cells = <0>;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		codec {
+			mic-in-differential;
+		};
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-boot-on;
+				regulator-name = "vcc3v3";
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
+			&i2s1m0_lrcktx &i2s1m0_lrckrx
+			&i2s1m0_sdi0   &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		user_led_enable_h: user-led-enable-h {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcca1v8_pmu>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+	status = "okay";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
new file mode 100644
index 000000000..4e49bebf5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Blade carrier board";
+	compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* labeled VCC_SSD in schematic */
+	vcc3v3_pcie_p: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie_p";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc5v_dcin: vcc5v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	color = <LED_COLOR_ID_RED>;
+	function = LED_FUNCTION_DISK_ACTIVITY;
+	linux,default-trigger = "disk-activity";
+	status = "okay";
+};
+
+&led_work {
+	color = <LED_COLOR_ID_GREEN>;
+	function = LED_FUNCTION_STATUS;
+	linux,default-trigger = "heartbeat";
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie_p>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+&sdmmc0 {
+	vmmc-supply = <&vcc3v0_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v_dcin>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
new file mode 100644
index 000000000..cddf6cd2f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
+	compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled +12v in schematic */
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* labeled +5v in schematic */
+	vcc_5v: vcc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_sd_pwr: vcc-sd-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * the rtc interrupt is tied to PMIC_PWRON,
+	 * it will force reset the board if triggered.
+	 */
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+	};
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	status = "okay";
+};
+
+&led_work {
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+&sdmmc0 {
+	vmmc-supply = <&vcc_sd_pwr>;
+	status = "okay";
+};
+
+/*
+ *  spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc_5v>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
new file mode 100644
index 000000000..2208dbfb7
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+	model = "PINE64 RK3566 SOQuartz on Model A carrier board";
+	compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566";
+
+	/* labeled DCIN_12V in schematic */
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/*
+	 * Labelled VCC3V0_SD in schematic to not conflict with PMIC
+	 * regulator, it's 3.3v in actuality
+	 */
+	vcc3v0_sd: vcc3v0-sd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0_sd";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc12v_pcie: vcc12v-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+/* phy for pcie */
+&combphy2 {
+	phy-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "okay";
+
+	/*
+	 * the rtc interrupt is tied to PMIC_PWRON,
+	 * it will force reset the board if triggered.
+	 */
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+	};
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+	status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6  - i2s1_sdi2_m1
+ * pin 40 - GPIO9  - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3  - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	status = "disabled";
+};
+
+&led_diy {
+	status = "okay";
+};
+
+&led_work {
+	status = "okay";
+};
+
+&pcie2x1 {
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+&rgmii_phy1 {
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+	status = "disabled";
+};
+
+/*
+ * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+
+ * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys,
+ * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards.
+ */
+&sdmmc0 {
+	vmmc-supply = <&vcc3v3_sd>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7  - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8  - spi3_cs0_m0
+ * pin 40 - GPIO9  - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+	status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&vbus {
+	vin-supply = <&vcc5v0_usb>;
+};
+
+&vcc3v3_sd {
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
new file mode 100644
index 000000000..63bae36b8
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -0,0 +1,685 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3566.dtsi"
+
+/ {
+	model = "Pine64 RK3566 SoQuartz SOM";
+	compatible = "pine64,soquartz", "rockchip,rk3566";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+		mmc2 = &sdmmc1;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_diy: led-diy {
+			label = "diy-led";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&diy_led_enable_h>;
+			retain-state-suspended;
+			status = "disabled";
+		};
+
+		led_work: led-work {
+			label = "work-led";
+			default-state = "off";
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led_enable_h>;
+			retain-state-suspended;
+			status = "disabled";
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		status = "okay";
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
+	vbus: vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	/* sourced from vbus, vbus is provided by the carrier board */
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vbus>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_3v3>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m0_miim
+		     &gmac1m0_tx_bus2
+		     &gmac1m0_rx_bus2
+		     &gmac1m0_rgmii_clk
+		     &gmac1m0_clkinout
+		     &gmac1m0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f, also works well here */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	phy-handle = <&rgmii_phy1>;
+	status = "disabled";
+};
+
+&gpio0 {
+	nextrst-hog {
+		gpio-hog;
+		/*
+		 * GPIO_ACTIVE_LOW + output-low here means that the pin is set
+		 * to high, because output-low decides the value pre-inversion.
+		 */
+		gpios = <RK_PA5 GPIO_ACTIVE_LOW>;
+		line-name = "nEXTRST";
+		output-low;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+					regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-name = "vdd_npu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_image";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda_0v9";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdda0v9_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_acodec";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pmu";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_image";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				status = "disabled";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+		};
+	};
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+	status = "disabled";
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A
+ * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A
+ * pin 35 - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B
+ * pin 45 - i2c4_scl_m1
+ * pin 47 - i2c4_sda_m1
+ */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+	status = "disabled";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A
+ * pin 24 - i2s1_sdi1_m1
+ * pin 25 - i2s1_sdo0_m1
+ * pin 26 - i2s1_lrck_tx_m1
+ * pin 27 - i2s1_sdi0_m1
+ * pin 29 - i2s1_sdi3_m1
+ * pin 30 - i2s1_sdi2_m1
+ * pin 40 - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - i2s1_sdo2_m1
+ * pin 49 - i2s1_sclk_tx_m1
+ * pin 50 - i2s1_mclk_m1
+ * pin 56 - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
+		     &i2s1m1_lrcktx &i2s1m1_lrckrx
+		     &i2s1m1_sdi0   &i2s1m1_sdi1
+		     &i2s1m1_sdi2   &i2s1m1_sdi3
+		     &i2s1m1_sdo0   &i2s1m1_sdo1
+		     &i2s1m1_sdo2   &i2s1m1_sdo3>;
+	status = "disabled";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		status = "disabled";
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake_l: bt-wake-l {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		work_led_enable_h: work-led-enable-h {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_enable_h: diy-led-enable-h {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_clkreq_h: pcie-clkreq-h {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vcc_3v3>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A
+ * pin 94 - saradc_vin3
+ * pin 96 - saradc_vin2
+ */
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "disabled";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "disabled";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A
+ * pin 37 - spi3_cs1_m0
+ * pin 38 - spi3_clk_m0
+ * pin 39 - spi3_cs0_m0
+ * pin 40 - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - spi3_mosi_m0
+ */
+&spi3 {
+	status = "disabled";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcca1v8_pmu>;
+	};
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A
+ * pin 51 - uart2_rx_m0
+ * pin 55 - uart2_tx_m0
+ */
+&uart2 {
+	status = "disabled";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A
+ * pin 46 - uart7_tx_m2
+ * pin 47 - uart7_rx_m2
+ */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7m2_xfer>;
+	status = "disabled";
+};
+
+/* dwc3_otg is the only usb port available */
+&usb2phy0 {
+	status = "disabled";
+};
+
+&usb2phy0_otg {
+	status = "disabled";
+};
+
+&usb_host0_xhci {
+	status = "disabled";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
new file mode 100644
index 000000000..6c4b17d27
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include "rk356x.dtsi"
+
+/ {
+	compatible = "rockchip,rk3566";
+};
+
+&pipegrf {
+	compatible = "rockchip,rk3566-pipe-grf", "syscon";
+};
+
+&power {
+	power-domain@RK3568_PD_PIPE {
+		reg = <RK3568_PD_PIPE>;
+		clocks = <&cru PCLK_PIPE>;
+		pm_qos = <&qos_pcie2x1>,
+			 <&qos_sata1>,
+			 <&qos_sata2>,
+			 <&qos_usb3_0>,
+			 <&qos_usb3_1>;
+		#power-domain-cells = <0>;
+	};
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+};
+
+&vop {
+	compatible = "rockchip,rk3566-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
new file mode 100644
index 000000000..f9127ddfb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -0,0 +1,852 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
+	compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin &green_led_pin>;
+
+		blue_led: led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator feeds both ports */
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&minipcie_enable_h>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	/* actually fed by vcc3v3_sys, dependent on pi6c clock generator */
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ngffpcie_enable_h>;
+		startup-delay-us = <50000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy1 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x0f>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	/* pin 3 (SDA) + 4 (SCL) of header con2 */
+	status = "disabled";
+};
+
+&i2s0_8ch {
+	/* hdmi sound */
+	status = "okay";
+};
+
+&mdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan0";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	phy-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	/* M.2 slot */
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&ngffpcie_reset_h>;
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	/* mPCIe slot */
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_reset_h>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		green_led_pin: green-led-pin {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		minipcie_enable_h: minipcie-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+
+		ngffpcie_enable_h: ngffpcie-enable-h {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+
+		minipcie_reset_h: minipcie-reset-h {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+
+		ngffpcie_reset_h: ngffpcie-reset-h {
+			rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_drv_level_5>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_3v3>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm8 {
+	/* fan 5v - gnd - pwm */
+	status = "okay";
+};
+
+&pwm10 {
+	/* pin 7 of header con2 */
+	status = "disabled";
+};
+
+&pwm11 {
+	/* pin 15 of header con2 */
+	status = "disabled";
+};
+
+&pwm12 {
+	/* pin 21 of header con2 */
+	/* shared with uart9 + spi3 */
+	pinctrl-0 = <&pwm12m1_pins>;
+	status = "disabled";
+};
+
+&pwm13 {
+	/* pin 24 of header con2 */
+	/* shared with uart9 */
+	pinctrl-0 = <&pwm13m1_pins>;
+	status = "disabled";
+};
+
+&pwm14 {
+	/* pin 23 of header con2 */
+	/* shared with spi3 */
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "disabled";
+};
+
+&pwm15 {
+	/* pin 19 of header con2 */
+	/* shared with spi3 */
+	pinctrl-0 = <&pwm15m1_pins>;
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&spi3 {
+	/* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */
+	/* shared with pwm12/14/15 and uart9 */
+	pinctrl-0 = <&spi3m1_pins>;
+	status = "disabled";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart0 {
+	/* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */
+	status = "disabled";
+};
+
+&uart2 {
+	/* debug-uart */
+	status = "okay";
+};
+
+&uart7 {
+	/* pin 11 (TX) + 13 (RX) of header con2 */
+	pinctrl-0 = <&uart7m1_xfer>;
+	status = "disabled";
+};
+
+&uart9 {
+	/* pin 21 (TX) + 24 (RX) of header con2 */
+	/* shared with pwm13 and pwm12/spi3 */
+	pinctrl-0 = <&uart9m1_xfer>;
+	status = "disabled";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	/* USB for PCIe/M2 */
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
new file mode 100644
index 000000000..19f8fc369
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
+	compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc3v3_lcd0_n: vcc3v3-lcd0-n {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd0_n";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd0_n_en>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc3v3_lcd1_n: vcc3v3-lcd1-n {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd1_n";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd1_n_en>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			mic-in-differential;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen0: goodix@14 {
+		compatible = "goodix,gt1151";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v3_lcd0_n>;
+		irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc3v3_lcd0_n>;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	display {
+		vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
+			rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
+		};
+		vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	touchscreen {
+		touch_int: touch_int {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		touch_rst: touch_rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
new file mode 100644
index 000000000..58ab7e997
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rk3568-fastrhino-r66s.dtsi"
+
+/ {
+	model = "Lunzn FastRhino R66S";
+	compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdmmc0;
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
new file mode 100644
index 000000000..89e84e3a9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&status_led_pin>;
+
+		status_led: led-status {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <950000>;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		status_led_pin: status-led-pin {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
new file mode 100644
index 000000000..e1fe5e442
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "rk3568-fastrhino-r66s.dtsi"
+
+/ {
+	model = "Lunzn FastRhino R68S";
+	compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x26>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		pinctrl-0 = <&eth_phy1_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gmac1 {
+		eth_phy1_reset_pin: eth-phy1-reset-pin {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
new file mode 100644
index 000000000..a8a4cc190
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 EmbedFire <embedfire@embedfire.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "EmbedFire LubanCat 2";
+	compatible = "embedfire,lubancat-2", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user-led {
+			label = "user_led";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_pin>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	dc_5v: dc-5v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_5v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_5v>;
+	};
+
+	vcc3v3_m2_pcie: vcc3v3-m2-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "m2_pcie_3v3";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc3v3_m2_pcie_en>;
+		pinctrl-names = "default";
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_mini_pcie: vcc3v3-mini-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "minipcie_3v3";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc3v3_mini_pcie_en>;
+		pinctrl-names = "default";
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb20_host: vcc5v0-usb20-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb20_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		pinctrl-names = "default";
+	};
+
+	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb30_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_usb30_host_en>;
+		pinctrl-names = "default";
+	};
+
+	vcc5v0_otg_vbus: vcc5v0-otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg_vbus";
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc5v0_otg_vbus_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+
+	tx_delay = <0x22>;
+	rx_delay = <0x0e>;
+
+	phy-handle = <&rgmii_phy0>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&gmac1 {
+	phy-mode = "rgmii";
+	clock_in_out = "output";
+
+	snps,reset-gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	tx_delay = <0x21>;
+	rx_delay = <0x0e>;
+
+	phy-handle = <&rgmii_phy1>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&gic {
+	mbi-ranges = <94 31>, <229 31>, <289 31>;
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_m2_pcie>;
+	status = "okay";
+};
+
+&pcie2x1 {
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	disable-gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_mini_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm8 {
+	status = "okay";
+};
+
+&pwm9 {
+	status = "disabled";
+};
+
+&pwm10 {
+	status = "disabled";
+};
+
+&pwm14 {
+	status = "disabled";
+};
+
+&spi3 {
+	pinctrl-0 = <&spi3m1_pins>;
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3m1_xfer>;
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&sdhci {
+	assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>, <&cru CCLK_EMMC>;
+	assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	supports-emmc;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+/* USB OTG/USB Host_1 USB 2.0 Comb */
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_otg_vbus>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* USB Host_2/USB Host_3 USB 2.0 Comb */
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* MULTI_PHY0 For SATA0, USB3.0 OTG Only USB2.0 */
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>;
+	phy-names = "usb2-phy";
+	extcon = <&usb2phy0>;
+	maximum-speed = "high-speed";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+/* USB3.0 Host */
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&pinctrl {
+	leds {
+		user_led_pin: user-status-led-pin {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_vbus_en: vcc5v0-otg-vbus-en {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		vcc3v3_m2_pcie_en: vcc3v3-m2-pcie-en {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc3v3_mini_pcie_en: vcc3v3-mini-pcie-en {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
new file mode 100644
index 000000000..c718b8dbb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5C";
+	compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
+
+		led-lan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20_reset_pin>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20_reset_pin: pcie20-reset-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
new file mode 100644
index 000000000..b6ad8328c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5S";
+	compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
+
+		led-lan1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 15ms, 50ms for rtl8211f */
+	snps,reset-delays-us = <0 15000 50000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-names = "default";
+	};
+};
+
+&pcie2x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	num-ib-windows = <8>;
+	num-ob-windows = <8>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac0 {
+		eth_phy0_reset_pin: eth-phy0-reset-pin {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		lan1_led_pin: lan1-led-pin {
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan2_led_pin: lan2-led-pin {
+			rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
new file mode 100644
index 000000000..93189f830
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vdd_usbc: vdd-usbc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usbc";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <200000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_usbc>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
new file mode 100644
index 000000000..a337f547c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Hardkernel Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-M1";
+	compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c3;
+		i2c3 = &i2c0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_receiver_pin>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power: led-0 {
+			gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_power_pin>;
+		};
+		led_work: led-1 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_pin>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det_pin>;
+		simple-audio-card,name = "Analog RK817";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&combphy1 {
+	/* Used for USB3 */
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+
+	tx_delay = <0x4f>;
+	rx_delay = <0x2d>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	fspi {
+		fspi_dual_io_pins: fspi-dual-io-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	ir-receiver {
+		ir_receiver_pin: ir-receiver-pin {
+			/* external pullup to VCC3V3_SYS */
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_power_pin: led-power-pin {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		led_work_pin: led-work-pin {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rk809 {
+		hp_det_pin: hp-det-pin {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sfc {
+	/* Dual I/O mode as the D2 pin conflicts with the eMMC */
+	pinctrl-0 = <&fspi_dual_io_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "SPL";
+				reg = <0x0 0xe0000>;
+			};
+			partition@e0000 {
+				label = "U-Boot Env";
+				reg = <0xe0000 0x20000>;
+			};
+			partition@100000 {
+				label = "U-Boot";
+				reg = <0x100000 0x200000>;
+			};
+			partition@300000 {
+				label = "splash";
+				reg = <0x300000 0x100000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
new file mode 100644
index 000000000..0a979bfb6
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
@@ -0,0 +1,3214 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	acodec {
+		/omit-if-no-ref/
+		acodec_pins: acodec-pins {
+			rockchip,pins =
+				/* acodec_adc_sync */
+				<1 RK_PB1 5 &pcfg_pull_none>,
+				/* acodec_adcclk */
+				<1 RK_PA1 5 &pcfg_pull_none>,
+				/* acodec_adcdata */
+				<1 RK_PA0 5 &pcfg_pull_none>,
+				/* acodec_dac_datal */
+				<1 RK_PA7 5 &pcfg_pull_none>,
+				/* acodec_dac_datar */
+				<1 RK_PB0 5 &pcfg_pull_none>,
+				/* acodec_dacclk */
+				<1 RK_PA3 5 &pcfg_pull_none>,
+				/* acodec_dacsync */
+				<1 RK_PA5 5 &pcfg_pull_none>;
+		};
+	};
+
+	audiopwm {
+		/omit-if-no-ref/
+		audiopwm_lout: audiopwm-lout {
+			rockchip,pins =
+				/* audiopwm_lout */
+				<1 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_loutn: audiopwm-loutn {
+			rockchip,pins =
+				/* audiopwm_loutn */
+				<1 RK_PA1 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_loutp: audiopwm-loutp {
+			rockchip,pins =
+				/* audiopwm_loutp */
+				<1 RK_PA0 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_rout: audiopwm-rout {
+			rockchip,pins =
+				/* audiopwm_rout */
+				<1 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_routn: audiopwm-routn {
+			rockchip,pins =
+				/* audiopwm_routn */
+				<1 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		audiopwm_routp: audiopwm-routp {
+			rockchip,pins =
+				/* audiopwm_routp */
+				<1 RK_PA6 4 &pcfg_pull_none>;
+		};
+	};
+
+	bt656 {
+		/omit-if-no-ref/
+		bt656m0_pins: bt656m0-pins {
+			rockchip,pins =
+				/* bt656_clkm0 */
+				<3 RK_PA0 2 &pcfg_pull_none>,
+				/* bt656_d0m0 */
+				<2 RK_PD0 2 &pcfg_pull_none>,
+				/* bt656_d1m0 */
+				<2 RK_PD1 2 &pcfg_pull_none>,
+				/* bt656_d2m0 */
+				<2 RK_PD2 2 &pcfg_pull_none>,
+				/* bt656_d3m0 */
+				<2 RK_PD3 2 &pcfg_pull_none>,
+				/* bt656_d4m0 */
+				<2 RK_PD4 2 &pcfg_pull_none>,
+				/* bt656_d5m0 */
+				<2 RK_PD5 2 &pcfg_pull_none>,
+				/* bt656_d6m0 */
+				<2 RK_PD6 2 &pcfg_pull_none>,
+				/* bt656_d7m0 */
+				<2 RK_PD7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		bt656m1_pins: bt656m1-pins {
+			rockchip,pins =
+				/* bt656_clkm1 */
+				<4 RK_PB4 5 &pcfg_pull_none>,
+				/* bt656_d0m1 */
+				<3 RK_PC6 5 &pcfg_pull_none>,
+				/* bt656_d1m1 */
+				<3 RK_PC7 5 &pcfg_pull_none>,
+				/* bt656_d2m1 */
+				<3 RK_PD0 5 &pcfg_pull_none>,
+				/* bt656_d3m1 */
+				<3 RK_PD1 5 &pcfg_pull_none>,
+				/* bt656_d4m1 */
+				<3 RK_PD2 5 &pcfg_pull_none>,
+				/* bt656_d5m1 */
+				<3 RK_PD3 5 &pcfg_pull_none>,
+				/* bt656_d6m1 */
+				<3 RK_PD4 5 &pcfg_pull_none>,
+				/* bt656_d7m1 */
+				<3 RK_PD5 5 &pcfg_pull_none>;
+		};
+	};
+
+	bt1120 {
+		/omit-if-no-ref/
+		bt1120_pins: bt1120-pins {
+			rockchip,pins =
+				/* bt1120_clk */
+				<3 RK_PA6 2 &pcfg_pull_none>,
+				/* bt1120_d0 */
+				<3 RK_PA1 2 &pcfg_pull_none>,
+				/* bt1120_d1 */
+				<3 RK_PA2 2 &pcfg_pull_none>,
+				/* bt1120_d2 */
+				<3 RK_PA3 2 &pcfg_pull_none>,
+				/* bt1120_d3 */
+				<3 RK_PA4 2 &pcfg_pull_none>,
+				/* bt1120_d4 */
+				<3 RK_PA5 2 &pcfg_pull_none>,
+				/* bt1120_d5 */
+				<3 RK_PA7 2 &pcfg_pull_none>,
+				/* bt1120_d6 */
+				<3 RK_PB0 2 &pcfg_pull_none>,
+				/* bt1120_d7 */
+				<3 RK_PB1 2 &pcfg_pull_none>,
+				/* bt1120_d8 */
+				<3 RK_PB2 2 &pcfg_pull_none>,
+				/* bt1120_d9 */
+				<3 RK_PB3 2 &pcfg_pull_none>,
+				/* bt1120_d10 */
+				<3 RK_PB4 2 &pcfg_pull_none>,
+				/* bt1120_d11 */
+				<3 RK_PB5 2 &pcfg_pull_none>,
+				/* bt1120_d12 */
+				<3 RK_PB6 2 &pcfg_pull_none>,
+				/* bt1120_d13 */
+				<3 RK_PC1 2 &pcfg_pull_none>,
+				/* bt1120_d14 */
+				<3 RK_PC2 2 &pcfg_pull_none>,
+				/* bt1120_d15 */
+				<3 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	cam {
+		/omit-if-no-ref/
+		cam_clkout0: cam-clkout0 {
+			rockchip,pins =
+				/* cam_clkout0 */
+				<4 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cam_clkout1: cam-clkout1 {
+			rockchip,pins =
+				/* cam_clkout1 */
+				<4 RK_PB0 1 &pcfg_pull_none>;
+		};
+	};
+
+	can0 {
+		/omit-if-no-ref/
+		can0m0_pins: can0m0-pins {
+			rockchip,pins =
+				/* can0_rxm0 */
+				<0 RK_PB4 2 &pcfg_pull_none>,
+				/* can0_txm0 */
+				<0 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m1_pins: can0m1-pins {
+			rockchip,pins =
+				/* can0_rxm1 */
+				<2 RK_PA2 4 &pcfg_pull_none>,
+				/* can0_txm1 */
+				<2 RK_PA1 4 &pcfg_pull_none>;
+		};
+	};
+
+	can1 {
+		/omit-if-no-ref/
+		can1m0_pins: can1m0-pins {
+			rockchip,pins =
+				/* can1_rxm0 */
+				<1 RK_PA0 3 &pcfg_pull_none>,
+				/* can1_txm0 */
+				<1 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can1m1_pins: can1m1-pins {
+			rockchip,pins =
+				/* can1_rxm1 */
+				<4 RK_PC2 3 &pcfg_pull_none>,
+				/* can1_txm1 */
+				<4 RK_PC3 3 &pcfg_pull_none>;
+		};
+	};
+
+	can2 {
+		/omit-if-no-ref/
+		can2m0_pins: can2m0-pins {
+			rockchip,pins =
+				/* can2_rxm0 */
+				<4 RK_PB4 3 &pcfg_pull_none>,
+				/* can2_txm0 */
+				<4 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can2m1_pins: can2m1-pins {
+			rockchip,pins =
+				/* can2_rxm1 */
+				<2 RK_PB1 4 &pcfg_pull_none>,
+				/* can2_txm1 */
+				<2 RK_PB2 4 &pcfg_pull_none>;
+		};
+	};
+
+	cif {
+		/omit-if-no-ref/
+		cif_clk: cif-clk {
+			rockchip,pins =
+				/* cif_clkout */
+				<4 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_clk: cif-dvp-clk {
+			rockchip,pins =
+				/* cif_clkin */
+				<4 RK_PC1 1 &pcfg_pull_none>,
+				/* cif_href */
+				<4 RK_PB6 1 &pcfg_pull_none>,
+				/* cif_vsync */
+				<4 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus16: cif-dvp-bus16 {
+			rockchip,pins =
+				/* cif_d8 */
+				<3 RK_PD6 1 &pcfg_pull_none>,
+				/* cif_d9 */
+				<3 RK_PD7 1 &pcfg_pull_none>,
+				/* cif_d10 */
+				<4 RK_PA0 1 &pcfg_pull_none>,
+				/* cif_d11 */
+				<4 RK_PA1 1 &pcfg_pull_none>,
+				/* cif_d12 */
+				<4 RK_PA2 1 &pcfg_pull_none>,
+				/* cif_d13 */
+				<4 RK_PA3 1 &pcfg_pull_none>,
+				/* cif_d14 */
+				<4 RK_PA4 1 &pcfg_pull_none>,
+				/* cif_d15 */
+				<4 RK_PA5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus8: cif-dvp-bus8 {
+			rockchip,pins =
+				/* cif_d0 */
+				<3 RK_PC6 1 &pcfg_pull_none>,
+				/* cif_d1 */
+				<3 RK_PC7 1 &pcfg_pull_none>,
+				/* cif_d2 */
+				<3 RK_PD0 1 &pcfg_pull_none>,
+				/* cif_d3 */
+				<3 RK_PD1 1 &pcfg_pull_none>,
+				/* cif_d4 */
+				<3 RK_PD2 1 &pcfg_pull_none>,
+				/* cif_d5 */
+				<3 RK_PD3 1 &pcfg_pull_none>,
+				/* cif_d6 */
+				<3 RK_PD4 1 &pcfg_pull_none>,
+				/* cif_d7 */
+				<3 RK_PD5 1 &pcfg_pull_none>;
+		};
+	};
+
+	clk32k {
+		/omit-if-no-ref/
+		clk32k_in: clk32k-in {
+			rockchip,pins =
+				/* clk32k_in */
+				<0 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clk32k_out0: clk32k-out0 {
+			rockchip,pins =
+				/* clk32k_out0 */
+				<0 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clk32k_out1: clk32k-out1 {
+			rockchip,pins =
+				/* clk32k_out1 */
+				<2 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	cpu {
+		/omit-if-no-ref/
+		cpu_pins: cpu-pins {
+			rockchip,pins =
+				/* cpu_avs */
+				<0 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+
+	ebc {
+		/omit-if-no-ref/
+		ebc_extern: ebc-extern {
+			rockchip,pins =
+				/* ebc_sdce1 */
+				<4 RK_PA7 2 &pcfg_pull_none>,
+				/* ebc_sdce2 */
+				<4 RK_PB0 2 &pcfg_pull_none>,
+				/* ebc_sdce3 */
+				<4 RK_PB1 2 &pcfg_pull_none>,
+				/* ebc_sdshr */
+				<4 RK_PB5 2 &pcfg_pull_none>,
+				/* ebc_vcom */
+				<4 RK_PB2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		ebc_pins: ebc-pins {
+			rockchip,pins =
+				/* ebc_gdclk */
+				<4 RK_PC0 2 &pcfg_pull_none>,
+				/* ebc_gdoe */
+				<4 RK_PB3 2 &pcfg_pull_none>,
+				/* ebc_gdsp */
+				<4 RK_PB4 2 &pcfg_pull_none>,
+				/* ebc_sdce0 */
+				<4 RK_PA6 2 &pcfg_pull_none>,
+				/* ebc_sdclk */
+				<4 RK_PC1 2 &pcfg_pull_none>,
+				/* ebc_sddo0 */
+				<3 RK_PC6 2 &pcfg_pull_none>,
+				/* ebc_sddo1 */
+				<3 RK_PC7 2 &pcfg_pull_none>,
+				/* ebc_sddo2 */
+				<3 RK_PD0 2 &pcfg_pull_none>,
+				/* ebc_sddo3 */
+				<3 RK_PD1 2 &pcfg_pull_none>,
+				/* ebc_sddo4 */
+				<3 RK_PD2 2 &pcfg_pull_none>,
+				/* ebc_sddo5 */
+				<3 RK_PD3 2 &pcfg_pull_none>,
+				/* ebc_sddo6 */
+				<3 RK_PD4 2 &pcfg_pull_none>,
+				/* ebc_sddo7 */
+				<3 RK_PD5 2 &pcfg_pull_none>,
+				/* ebc_sddo8 */
+				<3 RK_PD6 2 &pcfg_pull_none>,
+				/* ebc_sddo9 */
+				<3 RK_PD7 2 &pcfg_pull_none>,
+				/* ebc_sddo10 */
+				<4 RK_PA0 2 &pcfg_pull_none>,
+				/* ebc_sddo11 */
+				<4 RK_PA1 2 &pcfg_pull_none>,
+				/* ebc_sddo12 */
+				<4 RK_PA2 2 &pcfg_pull_none>,
+				/* ebc_sddo13 */
+				<4 RK_PA3 2 &pcfg_pull_none>,
+				/* ebc_sddo14 */
+				<4 RK_PA4 2 &pcfg_pull_none>,
+				/* ebc_sddo15 */
+				<4 RK_PA5 2 &pcfg_pull_none>,
+				/* ebc_sdle */
+				<4 RK_PB6 2 &pcfg_pull_none>,
+				/* ebc_sdoe */
+				<4 RK_PB7 2 &pcfg_pull_none>;
+		};
+	};
+
+	edpdp {
+		/omit-if-no-ref/
+		edpdpm0_pins: edpdpm0-pins {
+			rockchip,pins =
+				/* edpdp_hpdinm0 */
+				<4 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		edpdpm1_pins: edpdpm1-pins {
+			rockchip,pins =
+				/* edpdp_hpdinm1 */
+				<0 RK_PC2 2 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<1 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<1 RK_PB4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<1 RK_PB5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<1 RK_PB6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<1 RK_PB7 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<1 RK_PC0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<1 RK_PC1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<1 RK_PC2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<1 RK_PC3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clkout */
+				<1 RK_PC5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<1 RK_PC4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_datastrobe: emmc-datastrobe {
+			rockchip,pins =
+				/* emmc_datastrobe */
+				<1 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	eth0 {
+		/omit-if-no-ref/
+		eth0_pins: eth0-pins {
+			rockchip,pins =
+				/* eth0_refclko25m */
+				<2 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	eth1 {
+		/omit-if-no-ref/
+		eth1m0_pins: eth1m0-pins {
+			rockchip,pins =
+				/* eth1_refclko25mm0 */
+				<3 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		eth1m1_pins: eth1m1-pins {
+			rockchip,pins =
+				/* eth1_refclko25mm1 */
+				<4 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	flash {
+		/omit-if-no-ref/
+		flash_pins: flash-pins {
+			rockchip,pins =
+				/* flash_ale */
+				<1 RK_PD0 2 &pcfg_pull_none>,
+				/* flash_cle */
+				<1 RK_PC6 3 &pcfg_pull_none>,
+				/* flash_cs0n */
+				<1 RK_PD3 2 &pcfg_pull_none>,
+				/* flash_cs1n */
+				<1 RK_PD4 2 &pcfg_pull_none>,
+				/* flash_d0 */
+				<1 RK_PB4 2 &pcfg_pull_none>,
+				/* flash_d1 */
+				<1 RK_PB5 2 &pcfg_pull_none>,
+				/* flash_d2 */
+				<1 RK_PB6 2 &pcfg_pull_none>,
+				/* flash_d3 */
+				<1 RK_PB7 2 &pcfg_pull_none>,
+				/* flash_d4 */
+				<1 RK_PC0 2 &pcfg_pull_none>,
+				/* flash_d5 */
+				<1 RK_PC1 2 &pcfg_pull_none>,
+				/* flash_d6 */
+				<1 RK_PC2 2 &pcfg_pull_none>,
+				/* flash_d7 */
+				<1 RK_PC3 2 &pcfg_pull_none>,
+				/* flash_dqs */
+				<1 RK_PC5 2 &pcfg_pull_none>,
+				/* flash_rdn */
+				<1 RK_PD2 2 &pcfg_pull_none>,
+				/* flash_rdy */
+				<1 RK_PD1 2 &pcfg_pull_none>,
+				/* flash_volsel */
+				<0 RK_PA7 1 &pcfg_pull_none>,
+				/* flash_wpn */
+				<1 RK_PC7 3 &pcfg_pull_none>,
+				/* flash_wrn */
+				<1 RK_PC4 2 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspi_pins: fspi-pins {
+			rockchip,pins =
+				/* fspi_clk */
+				<1 RK_PD0 1 &pcfg_pull_none>,
+				/* fspi_cs0n */
+				<1 RK_PD3 1 &pcfg_pull_none>,
+				/* fspi_d0 */
+				<1 RK_PD1 1 &pcfg_pull_none>,
+				/* fspi_d1 */
+				<1 RK_PD2 1 &pcfg_pull_none>,
+				/* fspi_d2 */
+				<1 RK_PC7 2 &pcfg_pull_none>,
+				/* fspi_d3 */
+				<1 RK_PD4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		fspi_cs1: fspi-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n */
+				<1 RK_PC6 2 &pcfg_pull_up>;
+		};
+	};
+
+	gmac0 {
+		/omit-if-no-ref/
+		gmac0_miim: gmac0-miim {
+			rockchip,pins =
+				/* gmac0_mdc */
+				<2 RK_PC3 2 &pcfg_pull_none>,
+				/* gmac0_mdio */
+				<2 RK_PC4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_clkinout: gmac0-clkinout {
+			rockchip,pins =
+				/* gmac0_mclkinout */
+				<2 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rx_er: gmac0-rx-er {
+			rockchip,pins =
+				/* gmac0_rxer */
+				<2 RK_PC5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rx_bus2: gmac0-rx-bus2 {
+			rockchip,pins =
+				/* gmac0_rxd0 */
+				<2 RK_PB6 1 &pcfg_pull_none>,
+				/* gmac0_rxd1 */
+				<2 RK_PB7 2 &pcfg_pull_none>,
+				/* gmac0_rxdvcrs */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_tx_bus2: gmac0-tx-bus2 {
+			rockchip,pins =
+				/* gmac0_txd0 */
+				<2 RK_PB3 1 &pcfg_pull_none_drv_level_2>,
+				/* gmac0_txd1 */
+				<2 RK_PB4 1 &pcfg_pull_none_drv_level_2>,
+				/* gmac0_txen */
+				<2 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_clk: gmac0-rgmii-clk {
+			rockchip,pins =
+				/* gmac0_rxclk */
+				<2 RK_PA5 2 &pcfg_pull_none>,
+				/* gmac0_txclk */
+				<2 RK_PB0 2 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_bus: gmac0-rgmii-bus {
+			rockchip,pins =
+				/* gmac0_rxd2 */
+				<2 RK_PA3 2 &pcfg_pull_none>,
+				/* gmac0_rxd3 */
+				<2 RK_PA4 2 &pcfg_pull_none>,
+				/* gmac0_txd2 */
+				<2 RK_PA6 2 &pcfg_pull_none_drv_level_2>,
+				/* gmac0_txd3 */
+				<2 RK_PA7 2 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	gmac1 {
+		/omit-if-no-ref/
+		gmac1m0_miim: gmac1m0-miim {
+			rockchip,pins =
+				/* gmac1_mdcm0 */
+				<3 RK_PC4 3 &pcfg_pull_none>,
+				/* gmac1_mdiom0 */
+				<3 RK_PC5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_clkinout: gmac1m0-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinoutm0 */
+				<3 RK_PC0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rx_er: gmac1m0-rx-er {
+			rockchip,pins =
+				/* gmac1_rxerm0 */
+				<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0m0 */
+				<3 RK_PB1 3 &pcfg_pull_none>,
+				/* gmac1_rxd1m0 */
+				<3 RK_PB2 3 &pcfg_pull_none>,
+				/* gmac1_rxdvcrsm0 */
+				<3 RK_PB3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0m0 */
+				<3 RK_PB5 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd1m0 */
+				<3 RK_PB6 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txenm0 */
+				<3 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclkm0 */
+				<3 RK_PA7 3 &pcfg_pull_none>,
+				/* gmac1_txclkm0 */
+				<3 RK_PA6 3 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2m0 */
+				<3 RK_PA4 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m0 */
+				<3 RK_PA5 3 &pcfg_pull_none>,
+				/* gmac1_txd2m0 */
+				<3 RK_PA2 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd3m0 */
+				<3 RK_PA3 3 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_miim: gmac1m1-miim {
+			rockchip,pins =
+				/* gmac1_mdcm1 */
+				<4 RK_PB6 3 &pcfg_pull_none>,
+				/* gmac1_mdiom1 */
+				<4 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_clkinout: gmac1m1-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinoutm1 */
+				<4 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rx_er: gmac1m1-rx-er {
+			rockchip,pins =
+				/* gmac1_rxerm1 */
+				<4 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rx_bus2: gmac1m1-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0m1 */
+				<4 RK_PA7 3 &pcfg_pull_none>,
+				/* gmac1_rxd1m1 */
+				<4 RK_PB0 3 &pcfg_pull_none>,
+				/* gmac1_rxdvcrsm1 */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_tx_bus2: gmac1m1-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0m1 */
+				<4 RK_PA4 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd1m1 */
+				<4 RK_PA5 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txenm1 */
+				<4 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_clk: gmac1m1-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclkm1 */
+				<4 RK_PA3 3 &pcfg_pull_none>,
+				/* gmac1_txclkm1 */
+				<4 RK_PA0 3 &pcfg_pull_none_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_bus: gmac1m1-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2m1 */
+				<4 RK_PA1 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m1 */
+				<4 RK_PA2 3 &pcfg_pull_none>,
+				/* gmac1_txd2m1 */
+				<3 RK_PD6 3 &pcfg_pull_none_drv_level_2>,
+				/* gmac1_txd3m1 */
+				<3 RK_PD7 3 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<0 RK_PC0 2 &pcfg_pull_none>,
+				/* gpu_pwren */
+				<0 RK_PA6 4 &pcfg_pull_none>;
+		};
+	};
+
+	hdmitx {
+		/omit-if-no-ref/
+		hdmitxm0_cec: hdmitxm0-cec {
+			rockchip,pins =
+				/* hdmitxm0_cec */
+				<4 RK_PD1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmitxm1_cec: hdmitxm1-cec {
+			rockchip,pins =
+				/* hdmitxm1_cec */
+				<0 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmitx_scl: hdmitx-scl {
+			rockchip,pins =
+				/* hdmitx_scl */
+				<4 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmitx_sda: hdmitx-sda {
+			rockchip,pins =
+				/* hdmitx_sda */
+				<4 RK_PD0 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0_xfer: i2c0-xfer {
+			rockchip,pins =
+				/* i2c0_scl */
+				<0 RK_PB1 1 &pcfg_pull_none_smt>,
+				/* i2c0_sda */
+				<0 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1_xfer: i2c1-xfer {
+			rockchip,pins =
+				/* i2c1_scl */
+				<0 RK_PB3 1 &pcfg_pull_none_smt>,
+				/* i2c1_sda */
+				<0 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_sclm0 */
+				<0 RK_PB5 1 &pcfg_pull_none_smt>,
+				/* i2c2_sdam0 */
+				<0 RK_PB6 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_sclm1 */
+				<4 RK_PB5 1 &pcfg_pull_none_smt>,
+				/* i2c2_sdam1 */
+				<4 RK_PB4 1 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_sclm0 */
+				<1 RK_PA1 1 &pcfg_pull_none_smt>,
+				/* i2c3_sdam0 */
+				<1 RK_PA0 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_sclm1 */
+				<3 RK_PB5 4 &pcfg_pull_none_smt>,
+				/* i2c3_sdam1 */
+				<3 RK_PB6 4 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m0_xfer: i2c4m0-xfer {
+			rockchip,pins =
+				/* i2c4_sclm0 */
+				<4 RK_PB3 1 &pcfg_pull_none_smt>,
+				/* i2c4_sdam0 */
+				<4 RK_PB2 1 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m1_xfer: i2c4m1-xfer {
+			rockchip,pins =
+				/* i2c4_sclm1 */
+				<2 RK_PB2 2 &pcfg_pull_none_smt>,
+				/* i2c4_sdam1 */
+				<2 RK_PB1 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_sclm0 */
+				<3 RK_PB3 4 &pcfg_pull_none_smt>,
+				/* i2c5_sdam0 */
+				<3 RK_PB4 4 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_sclm1 */
+				<4 RK_PC7 2 &pcfg_pull_none_smt>,
+				/* i2c5_sdam1 */
+				<4 RK_PD0 2 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1m0_lrckrx: i2s1m0-lrckrx {
+			rockchip,pins =
+				/* i2s1m0_lrckrx */
+				<1 RK_PA6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_lrcktx: i2s1m0-lrcktx {
+			rockchip,pins =
+				/* i2s1m0_lrcktx */
+				<1 RK_PA5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_mclk: i2s1m0-mclk {
+			rockchip,pins =
+				/* i2s1m0_mclk */
+				<1 RK_PA2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclkrx: i2s1m0-sclkrx {
+			rockchip,pins =
+				/* i2s1m0_sclkrx */
+				<1 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclktx: i2s1m0-sclktx {
+			rockchip,pins =
+				/* i2s1m0_sclktx */
+				<1 RK_PA3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi0: i2s1m0-sdi0 {
+			rockchip,pins =
+				/* i2s1m0_sdi0 */
+				<1 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi1: i2s1m0-sdi1 {
+			rockchip,pins =
+				/* i2s1m0_sdi1 */
+				<1 RK_PB2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi2: i2s1m0-sdi2 {
+			rockchip,pins =
+				/* i2s1m0_sdi2 */
+				<1 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi3: i2s1m0-sdi3 {
+			rockchip,pins =
+				/* i2s1m0_sdi3 */
+				<1 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo0: i2s1m0-sdo0 {
+			rockchip,pins =
+				/* i2s1m0_sdo0 */
+				<1 RK_PA7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo1: i2s1m0-sdo1 {
+			rockchip,pins =
+				/* i2s1m0_sdo1 */
+				<1 RK_PB0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo2: i2s1m0-sdo2 {
+			rockchip,pins =
+				/* i2s1m0_sdo2 */
+				<1 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo3: i2s1m0-sdo3 {
+			rockchip,pins =
+				/* i2s1m0_sdo3 */
+				<1 RK_PB2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_lrckrx: i2s1m1-lrckrx {
+			rockchip,pins =
+				/* i2s1m1_lrckrx */
+				<4 RK_PA7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_lrcktx: i2s1m1-lrcktx {
+			rockchip,pins =
+				/* i2s1m1_lrcktx */
+				<3 RK_PD0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_mclk: i2s1m1-mclk {
+			rockchip,pins =
+				/* i2s1m1_mclk */
+				<3 RK_PC6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclkrx: i2s1m1-sclkrx {
+			rockchip,pins =
+				/* i2s1m1_sclkrx */
+				<4 RK_PA6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclktx: i2s1m1-sclktx {
+			rockchip,pins =
+				/* i2s1m1_sclktx */
+				<3 RK_PC7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi0: i2s1m1-sdi0 {
+			rockchip,pins =
+				/* i2s1m1_sdi0 */
+				<3 RK_PD2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi1: i2s1m1-sdi1 {
+			rockchip,pins =
+				/* i2s1m1_sdi1 */
+				<3 RK_PD3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi2: i2s1m1-sdi2 {
+			rockchip,pins =
+				/* i2s1m1_sdi2 */
+				<3 RK_PD4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi3: i2s1m1-sdi3 {
+			rockchip,pins =
+				/* i2s1m1_sdi3 */
+				<3 RK_PD5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo0: i2s1m1-sdo0 {
+			rockchip,pins =
+				/* i2s1m1_sdo0 */
+				<3 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo1: i2s1m1-sdo1 {
+			rockchip,pins =
+				/* i2s1m1_sdo1 */
+				<4 RK_PB0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo2: i2s1m1-sdo2 {
+			rockchip,pins =
+				/* i2s1m1_sdo2 */
+				<4 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo3: i2s1m1-sdo3 {
+			rockchip,pins =
+				/* i2s1m1_sdo3 */
+				<4 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_lrckrx: i2s1m2-lrckrx {
+			rockchip,pins =
+				/* i2s1m2_lrckrx */
+				<3 RK_PC5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_lrcktx: i2s1m2-lrcktx {
+			rockchip,pins =
+				/* i2s1m2_lrcktx */
+				<2 RK_PD2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_mclk: i2s1m2-mclk {
+			rockchip,pins =
+				/* i2s1m2_mclk */
+				<2 RK_PD0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sclkrx: i2s1m2-sclkrx {
+			rockchip,pins =
+				/* i2s1m2_sclkrx */
+				<3 RK_PC3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sclktx: i2s1m2-sclktx {
+			rockchip,pins =
+				/* i2s1m2_sclktx */
+				<2 RK_PD1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi0: i2s1m2-sdi0 {
+			rockchip,pins =
+				/* i2s1m2_sdi0 */
+				<2 RK_PD3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi1: i2s1m2-sdi1 {
+			rockchip,pins =
+				/* i2s1m2_sdi1 */
+				<2 RK_PD4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi2: i2s1m2-sdi2 {
+			rockchip,pins =
+				/* i2s1m2_sdi2 */
+				<2 RK_PD5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdi3: i2s1m2-sdi3 {
+			rockchip,pins =
+				/* i2s1m2_sdi3 */
+				<2 RK_PD6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo0: i2s1m2-sdo0 {
+			rockchip,pins =
+				/* i2s1m2_sdo0 */
+				<2 RK_PD7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo1: i2s1m2-sdo1 {
+			rockchip,pins =
+				/* i2s1m2_sdo1 */
+				<3 RK_PA0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo2: i2s1m2-sdo2 {
+			rockchip,pins =
+				/* i2s1m2_sdo2 */
+				<3 RK_PC1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m2_sdo3: i2s1m2-sdo3 {
+			rockchip,pins =
+				/* i2s1m2_sdo3 */
+				<3 RK_PC2 5 &pcfg_pull_none>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m0_lrckrx: i2s2m0-lrckrx {
+			rockchip,pins =
+				/* i2s2m0_lrckrx */
+				<2 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_lrcktx: i2s2m0-lrcktx {
+			rockchip,pins =
+				/* i2s2m0_lrcktx */
+				<2 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2m0_mclk */
+				<2 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclkrx: i2s2m0-sclkrx {
+			rockchip,pins =
+				/* i2s2m0_sclkrx */
+				<2 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclktx: i2s2m0-sclktx {
+			rockchip,pins =
+				/* i2s2m0_sclktx */
+				<2 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2m0_sdi */
+				<2 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2m0_sdo */
+				<2 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_lrckrx: i2s2m1-lrckrx {
+			rockchip,pins =
+				/* i2s2m1_lrckrx */
+				<4 RK_PA5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_lrcktx: i2s2m1-lrcktx {
+			rockchip,pins =
+				/* i2s2m1_lrcktx */
+				<4 RK_PA4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_mclk: i2s2m1-mclk {
+			rockchip,pins =
+				/* i2s2m1_mclk */
+				<4 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclkrx: i2s2m1-sclkrx {
+			rockchip,pins =
+				/* i2s2m1_sclkrx */
+				<4 RK_PC1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclktx: i2s2m1-sclktx {
+			rockchip,pins =
+				/* i2s2m1_sclktx */
+				<4 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdi: i2s2m1-sdi {
+			rockchip,pins =
+				/* i2s2m1_sdi */
+				<4 RK_PB2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdo: i2s2m1-sdo {
+			rockchip,pins =
+				/* i2s2m1_sdo */
+				<4 RK_PB3 5 &pcfg_pull_none>;
+		};
+	};
+
+	i2s3 {
+		/omit-if-no-ref/
+		i2s3m0_lrck: i2s3m0-lrck {
+			rockchip,pins =
+				/* i2s3m0_lrck */
+				<3 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_mclk: i2s3m0-mclk {
+			rockchip,pins =
+				/* i2s3m0_mclk */
+				<3 RK_PA2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_sclk: i2s3m0-sclk {
+			rockchip,pins =
+				/* i2s3m0_sclk */
+				<3 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_sdi: i2s3m0-sdi {
+			rockchip,pins =
+				/* i2s3m0_sdi */
+				<3 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m0_sdo: i2s3m0-sdo {
+			rockchip,pins =
+				/* i2s3m0_sdo */
+				<3 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_lrck: i2s3m1-lrck {
+			rockchip,pins =
+				/* i2s3m1_lrck */
+				<4 RK_PC4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_mclk: i2s3m1-mclk {
+			rockchip,pins =
+				/* i2s3m1_mclk */
+				<4 RK_PC2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_sclk: i2s3m1-sclk {
+			rockchip,pins =
+				/* i2s3m1_sclk */
+				<4 RK_PC3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_sdi: i2s3m1-sdi {
+			rockchip,pins =
+				/* i2s3m1_sdi */
+				<4 RK_PC6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3m1_sdo: i2s3m1-sdo {
+			rockchip,pins =
+				/* i2s3m1_sdo */
+				<4 RK_PC5 5 &pcfg_pull_none>;
+		};
+	};
+
+	isp {
+		/omit-if-no-ref/
+		isp_pins: isp-pins {
+			rockchip,pins =
+				/* isp_flashtrigin */
+				<4 RK_PB4 4 &pcfg_pull_none>,
+				/* isp_flashtrigout */
+				<4 RK_PA6 1 &pcfg_pull_none>,
+				/* isp_prelighttrig */
+				<4 RK_PB1 1 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtag_pins: jtag-pins {
+			rockchip,pins =
+				/* jtag_tck */
+				<1 RK_PD7 2 &pcfg_pull_none>,
+				/* jtag_tms */
+				<2 RK_PA0 2 &pcfg_pull_none>;
+		};
+	};
+
+	lcdc {
+		/omit-if-no-ref/
+		lcdc_ctl: lcdc-ctl {
+			rockchip,pins =
+				/* lcdc_clk */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* lcdc_d0 */
+				<2 RK_PD0 1 &pcfg_pull_none>,
+				/* lcdc_d1 */
+				<2 RK_PD1 1 &pcfg_pull_none>,
+				/* lcdc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_none>,
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d8 */
+				<3 RK_PA1 1 &pcfg_pull_none>,
+				/* lcdc_d9 */
+				<3 RK_PA2 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d16 */
+				<3 RK_PB1 1 &pcfg_pull_none>,
+				/* lcdc_d17 */
+				<3 RK_PB2 1 &pcfg_pull_none>,
+				/* lcdc_d18 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>,
+				/* lcdc_den */
+				<3 RK_PC3 1 &pcfg_pull_none>,
+				/* lcdc_hsync */
+				<3 RK_PC1 1 &pcfg_pull_none>,
+				/* lcdc_vsync */
+				<3 RK_PC2 1 &pcfg_pull_none>;
+		};
+	};
+
+	mcu {
+		/omit-if-no-ref/
+		mcu_pins: mcu-pins {
+			rockchip,pins =
+				/* mcu_jtagtck */
+				<0 RK_PB4 4 &pcfg_pull_none>,
+				/* mcu_jtagtdi */
+				<0 RK_PC1 4 &pcfg_pull_none>,
+				/* mcu_jtagtdo */
+				<0 RK_PB3 4 &pcfg_pull_none>,
+				/* mcu_jtagtms */
+				<0 RK_PC2 4 &pcfg_pull_none>,
+				/* mcu_jtagtrstn */
+				<0 RK_PC3 4 &pcfg_pull_none>;
+		};
+	};
+
+	npu {
+		/omit-if-no-ref/
+		npu_pins: npu-pins {
+			rockchip,pins =
+				/* npu_avs */
+				<0 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	pcie20 {
+		/omit-if-no-ref/
+		pcie20m0_pins: pcie20m0-pins {
+			rockchip,pins =
+				/* pcie20_clkreqnm0 */
+				<0 RK_PA5 3 &pcfg_pull_none>,
+				/* pcie20_perstnm0 */
+				<0 RK_PB6 3 &pcfg_pull_none>,
+				/* pcie20_wakenm0 */
+				<0 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20m1_pins: pcie20m1-pins {
+			rockchip,pins =
+				/* pcie20_clkreqnm1 */
+				<2 RK_PD0 4 &pcfg_pull_none>,
+				/* pcie20_perstnm1 */
+				<3 RK_PC1 4 &pcfg_pull_none>,
+				/* pcie20_wakenm1 */
+				<2 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20m2_pins: pcie20m2-pins {
+			rockchip,pins =
+				/* pcie20_clkreqnm2 */
+				<1 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie20_perstnm2 */
+				<1 RK_PB2 4 &pcfg_pull_none>,
+				/* pcie20_wakenm2 */
+				<1 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20_buttonrstn: pcie20-buttonrstn {
+			rockchip,pins =
+				/* pcie20_buttonrstn */
+				<0 RK_PB4 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x1 {
+		/omit-if-no-ref/
+		pcie30x1m0_pins: pcie30x1m0-pins {
+			rockchip,pins =
+				/* pcie30x1_clkreqnm0 */
+				<0 RK_PA4 3 &pcfg_pull_none>,
+				/* pcie30x1_perstnm0 */
+				<0 RK_PC3 3 &pcfg_pull_none>,
+				/* pcie30x1_wakenm0 */
+				<0 RK_PC2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_pins: pcie30x1m1-pins {
+			rockchip,pins =
+				/* pcie30x1_clkreqnm1 */
+				<2 RK_PD2 4 &pcfg_pull_none>,
+				/* pcie30x1_perstnm1 */
+				<3 RK_PA1 4 &pcfg_pull_none>,
+				/* pcie30x1_wakenm1 */
+				<2 RK_PD3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_pins: pcie30x1m2-pins {
+			rockchip,pins =
+				/* pcie30x1_clkreqnm2 */
+				<1 RK_PA5 4 &pcfg_pull_none>,
+				/* pcie30x1_perstnm2 */
+				<1 RK_PA2 4 &pcfg_pull_none>,
+				/* pcie30x1_wakenm2 */
+				<1 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1_buttonrstn: pcie30x1-buttonrstn {
+			rockchip,pins =
+				/* pcie30x1_buttonrstn */
+				<0 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x2 {
+		/omit-if-no-ref/
+		pcie30x2m0_pins: pcie30x2m0-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqnm0 */
+				<0 RK_PA6 2 &pcfg_pull_none>,
+				/* pcie30x2_perstnm0 */
+				<0 RK_PC6 3 &pcfg_pull_none>,
+				/* pcie30x2_wakenm0 */
+				<0 RK_PC5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m1_pins: pcie30x2m1-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqnm1 */
+				<2 RK_PD4 4 &pcfg_pull_none>,
+				/* pcie30x2_perstnm1 */
+				<2 RK_PD6 4 &pcfg_pull_none>,
+				/* pcie30x2_wakenm1 */
+				<2 RK_PD5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m2_pins: pcie30x2m2-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqnm2 */
+				<4 RK_PC2 4 &pcfg_pull_none>,
+				/* pcie30x2_perstnm2 */
+				<4 RK_PC4 4 &pcfg_pull_none>,
+				/* pcie30x2_wakenm2 */
+				<4 RK_PC3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2_buttonrstn: pcie30x2-buttonrstn {
+			rockchip,pins =
+				/* pcie30x2_buttonrstn */
+				<0 RK_PB0 3 &pcfg_pull_none>;
+		};
+	};
+
+	pdm {
+		/omit-if-no-ref/
+		pdmm0_clk: pdmm0-clk {
+			rockchip,pins =
+				/* pdm_clk0m0 */
+				<1 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_clk1: pdmm0-clk1 {
+			rockchip,pins =
+				/* pdmm0_clk1 */
+				<1 RK_PA4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi0: pdmm0-sdi0 {
+			rockchip,pins =
+				/* pdmm0_sdi0 */
+				<1 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi1: pdmm0-sdi1 {
+			rockchip,pins =
+				/* pdmm0_sdi1 */
+				<1 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi2: pdmm0-sdi2 {
+			rockchip,pins =
+				/* pdmm0_sdi2 */
+				<1 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm0_sdi3: pdmm0-sdi3 {
+			rockchip,pins =
+				/* pdmm0_sdi3 */
+				<1 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk: pdmm1-clk {
+			rockchip,pins =
+				/* pdm_clk0m1 */
+				<3 RK_PD6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_clk1: pdmm1-clk1 {
+			rockchip,pins =
+				/* pdmm1_clk1 */
+				<4 RK_PA0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi0: pdmm1-sdi0 {
+			rockchip,pins =
+				/* pdmm1_sdi0 */
+				<3 RK_PD7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi1: pdmm1-sdi1 {
+			rockchip,pins =
+				/* pdmm1_sdi1 */
+				<4 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi2: pdmm1-sdi2 {
+			rockchip,pins =
+				/* pdmm1_sdi2 */
+				<4 RK_PA2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm1_sdi3: pdmm1-sdi3 {
+			rockchip,pins =
+				/* pdmm1_sdi3 */
+				<4 RK_PA3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_clk1: pdmm2-clk1 {
+			rockchip,pins =
+				/* pdmm2_clk1 */
+				<3 RK_PC4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi0: pdmm2-sdi0 {
+			rockchip,pins =
+				/* pdmm2_sdi0 */
+				<3 RK_PB3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi1: pdmm2-sdi1 {
+			rockchip,pins =
+				/* pdmm2_sdi1 */
+				<3 RK_PB4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi2: pdmm2-sdi2 {
+			rockchip,pins =
+				/* pdmm2_sdi2 */
+				<3 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdmm2_sdi3: pdmm2-sdi3 {
+			rockchip,pins =
+				/* pdmm2_sdi3 */
+				<3 RK_PC0 5 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		/omit-if-no-ref/
+		pmic_pins: pmic-pins {
+			rockchip,pins =
+				/* pmic_sleep */
+				<0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug0 */
+				<0 RK_PA5 4 &pcfg_pull_none>,
+				/* pmu_debug1 */
+				<0 RK_PA6 3 &pcfg_pull_none>,
+				/* pmu_debug2 */
+				<0 RK_PC4 4 &pcfg_pull_none>,
+				/* pmu_debug3 */
+				<0 RK_PC5 4 &pcfg_pull_none>,
+				/* pmu_debug4 */
+				<0 RK_PC6 4 &pcfg_pull_none>,
+				/* pmu_debug5 */
+				<0 RK_PC7 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<0 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<0 RK_PC7 2 &pcfg_pull_none>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<0 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<0 RK_PB5 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<0 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<0 RK_PB6 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3_pins: pwm3-pins {
+			rockchip,pins =
+				/* pwm3_ir */
+				<0 RK_PC2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4_pins: pwm4-pins {
+			rockchip,pins =
+				/* pwm4 */
+				<0 RK_PC3 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5_pins: pwm5-pins {
+			rockchip,pins =
+				/* pwm5 */
+				<0 RK_PC4 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6_pins: pwm6-pins {
+			rockchip,pins =
+				/* pwm6 */
+				<0 RK_PC5 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7_pins: pwm7-pins {
+			rockchip,pins =
+				/* pwm7_ir */
+				<0 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_m0 */
+				<3 RK_PB1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_m1 */
+				<1 RK_PD5 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_m0 */
+				<3 RK_PB2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_m1 */
+				<1 RK_PD6 4 &pcfg_pull_none>;
+		};
+	};
+
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_m0 */
+				<3 RK_PB5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_m1 */
+				<2 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_irm0 */
+				<3 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_irm1 */
+				<4 RK_PC0 3 &pcfg_pull_none>;
+		};
+	};
+
+	pwm12 {
+		/omit-if-no-ref/
+		pwm12m0_pins: pwm12m0-pins {
+			rockchip,pins =
+				/* pwm12_m0 */
+				<3 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm12m1_pins: pwm12m1-pins {
+			rockchip,pins =
+				/* pwm12_m1 */
+				<4 RK_PC5 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm13 {
+		/omit-if-no-ref/
+		pwm13m0_pins: pwm13m0-pins {
+			rockchip,pins =
+				/* pwm13_m0 */
+				<3 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m1_pins: pwm13m1-pins {
+			rockchip,pins =
+				/* pwm13_m1 */
+				<4 RK_PC6 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm14 {
+		/omit-if-no-ref/
+		pwm14m0_pins: pwm14m0-pins {
+			rockchip,pins =
+				/* pwm14_m0 */
+				<3 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m1_pins: pwm14m1-pins {
+			rockchip,pins =
+				/* pwm14_m1 */
+				<4 RK_PC2 1 &pcfg_pull_none>;
+		};
+	};
+
+	pwm15 {
+		/omit-if-no-ref/
+		pwm15m0_pins: pwm15m0-pins {
+			rockchip,pins =
+				/* pwm15_irm0 */
+				<3 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m1_pins: pwm15m1-pins {
+			rockchip,pins =
+				/* pwm15_irm1 */
+				<4 RK_PC3 1 &pcfg_pull_none>;
+		};
+	};
+
+	refclk {
+		/omit-if-no-ref/
+		refclk_pins: refclk-pins {
+			rockchip,pins =
+				/* refclk_ou */
+				<0 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	sata {
+		/omit-if-no-ref/
+		sata_pins: sata-pins {
+			rockchip,pins =
+				/* sata_cpdet */
+				<0 RK_PA4 2 &pcfg_pull_none>,
+				/* sata_cppod */
+				<0 RK_PA6 1 &pcfg_pull_none>,
+				/* sata_mpswitch */
+				<0 RK_PA5 2 &pcfg_pull_none>;
+		};
+	};
+
+	sata0 {
+		/omit-if-no-ref/
+		sata0_pins: sata0-pins {
+			rockchip,pins =
+				/* sata0_actled */
+				<4 RK_PC6 3 &pcfg_pull_none>;
+		};
+	};
+
+	sata1 {
+		/omit-if-no-ref/
+		sata1_pins: sata1-pins {
+			rockchip,pins =
+				/* sata1_actled */
+				<4 RK_PC5 3 &pcfg_pull_none>;
+		};
+	};
+
+	sata2 {
+		/omit-if-no-ref/
+		sata2_pins: sata2-pins {
+			rockchip,pins =
+				/* sata2_actled */
+				<4 RK_PC4 3 &pcfg_pull_none>;
+		};
+	};
+
+	scr {
+		/omit-if-no-ref/
+		scr_pins: scr-pins {
+			rockchip,pins =
+				/* scr_clk */
+				<1 RK_PA2 3 &pcfg_pull_none>,
+				/* scr_det */
+				<1 RK_PA7 3 &pcfg_pull_up>,
+				/* scr_io */
+				<1 RK_PA3 3 &pcfg_pull_up>,
+				/* scr_rst */
+				<1 RK_PA5 3 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc0 {
+		/omit-if-no-ref/
+		sdmmc0_bus4: sdmmc0-bus4 {
+			rockchip,pins =
+				/* sdmmc0_d0 */
+				<1 RK_PD5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d1 */
+				<1 RK_PD6 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d2 */
+				<1 RK_PD7 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc0_d3 */
+				<2 RK_PA0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_clk: sdmmc0-clk {
+			rockchip,pins =
+				/* sdmmc0_clk */
+				<2 RK_PA2 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_cmd: sdmmc0-cmd {
+			rockchip,pins =
+				/* sdmmc0_cmd */
+				<2 RK_PA1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_det: sdmmc0-det {
+			rockchip,pins =
+				/* sdmmc0_det */
+				<0 RK_PA4 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc0_pwren: sdmmc0-pwren {
+			rockchip,pins =
+				/* sdmmc0_pwren */
+				<0 RK_PA5 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc1 {
+		/omit-if-no-ref/
+		sdmmc1_bus4: sdmmc1-bus4 {
+			rockchip,pins =
+				/* sdmmc1_d0 */
+				<2 RK_PA3 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d1 */
+				<2 RK_PA4 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d2 */
+				<2 RK_PA5 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc1_d3 */
+				<2 RK_PA6 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_clk: sdmmc1-clk {
+			rockchip,pins =
+				/* sdmmc1_clk */
+				<2 RK_PB0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_cmd: sdmmc1-cmd {
+			rockchip,pins =
+				/* sdmmc1_cmd */
+				<2 RK_PA7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_det: sdmmc1-det {
+			rockchip,pins =
+				/* sdmmc1_det */
+				<2 RK_PB2 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc1_pwren: sdmmc1-pwren {
+			rockchip,pins =
+				/* sdmmc1_pwren */
+				<2 RK_PB1 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc2 {
+		/omit-if-no-ref/
+		sdmmc2m0_bus4: sdmmc2m0-bus4 {
+			rockchip,pins =
+				/* sdmmc2_d0m0 */
+				<3 RK_PC6 3 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d1m0 */
+				<3 RK_PC7 3 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d2m0 */
+				<3 RK_PD0 3 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d3m0 */
+				<3 RK_PD1 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_clk: sdmmc2m0-clk {
+			rockchip,pins =
+				/* sdmmc2_clkm0 */
+				<3 RK_PD3 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_cmd: sdmmc2m0-cmd {
+			rockchip,pins =
+				/* sdmmc2_cmdm0 */
+				<3 RK_PD2 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_det: sdmmc2m0-det {
+			rockchip,pins =
+				/* sdmmc2_detm0 */
+				<3 RK_PD4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m0_pwren: sdmmc2m0-pwren {
+			rockchip,pins =
+				/* sdmmc2m0_pwren */
+				<3 RK_PD5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_bus4: sdmmc2m1-bus4 {
+			rockchip,pins =
+				/* sdmmc2_d0m1 */
+				<3 RK_PA1 5 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d1m1 */
+				<3 RK_PA2 5 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d2m1 */
+				<3 RK_PA3 5 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc2_d3m1 */
+				<3 RK_PA4 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_clk: sdmmc2m1-clk {
+			rockchip,pins =
+				/* sdmmc2_clkm1 */
+				<3 RK_PA6 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_cmd: sdmmc2m1-cmd {
+			rockchip,pins =
+				/* sdmmc2_cmdm1 */
+				<3 RK_PA5 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_det: sdmmc2m1-det {
+			rockchip,pins =
+				/* sdmmc2_detm1 */
+				<3 RK_PA7 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc2m1_pwren: sdmmc2m1-pwren {
+			rockchip,pins =
+				/* sdmmc2m1_pwren */
+				<3 RK_PB0 4 &pcfg_pull_none>;
+		};
+	};
+
+	spdif {
+		/omit-if-no-ref/
+		spdifm0_tx: spdifm0-tx {
+			rockchip,pins =
+				/* spdifm0_tx */
+				<1 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm1_tx: spdifm1-tx {
+			rockchip,pins =
+				/* spdifm1_tx */
+				<3 RK_PC5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdifm2_tx: spdifm2-tx {
+			rockchip,pins =
+				/* spdifm2_tx */
+				<4 RK_PC4 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0m0_pins: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clkm0 */
+				<0 RK_PB5 2 &pcfg_pull_none>,
+				/* spi0_misom0 */
+				<0 RK_PC5 2 &pcfg_pull_none>,
+				/* spi0_mosim0 */
+				<0 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs0: spi0m0-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m0 */
+				<0 RK_PC6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs1: spi0m0-cs1 {
+			rockchip,pins =
+				/* spi0_cs1m0 */
+				<0 RK_PC4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_pins: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clkm1 */
+				<2 RK_PD3 3 &pcfg_pull_none>,
+				/* spi0_misom1 */
+				<2 RK_PD0 3 &pcfg_pull_none>,
+				/* spi0_mosim1 */
+				<2 RK_PD1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs0: spi0m1-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m1 */
+				<2 RK_PD2 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m0_pins: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clkm0 */
+				<2 RK_PB5 3 &pcfg_pull_none>,
+				/* spi1_misom0 */
+				<2 RK_PB6 3 &pcfg_pull_none>,
+				/* spi1_mosim0 */
+				<2 RK_PB7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs0: spi1m0-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m0 */
+				<2 RK_PC0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs1: spi1m0-cs1 {
+			rockchip,pins =
+				/* spi1_cs1m0 */
+				<2 RK_PC6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_pins: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clkm1 */
+				<3 RK_PC3 3 &pcfg_pull_none>,
+				/* spi1_misom1 */
+				<3 RK_PC2 3 &pcfg_pull_none>,
+				/* spi1_mosim1 */
+				<3 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs0: spi1m1-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m1 */
+				<3 RK_PA1 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi2 {
+		/omit-if-no-ref/
+		spi2m0_pins: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clkm0 */
+				<2 RK_PC1 4 &pcfg_pull_none>,
+				/* spi2_misom0 */
+				<2 RK_PC2 4 &pcfg_pull_none>,
+				/* spi2_mosim0 */
+				<2 RK_PC3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs0: spi2m0-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m0 */
+				<2 RK_PC4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs1: spi2m0-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m0 */
+				<2 RK_PC5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clkm1 */
+				<3 RK_PA0 3 &pcfg_pull_none>,
+				/* spi2_misom1 */
+				<2 RK_PD7 3 &pcfg_pull_none>,
+				/* spi2_mosim1 */
+				<2 RK_PD6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs0: spi2m1-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m1 */
+				<2 RK_PD5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs1: spi2m1-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m1 */
+				<2 RK_PD4 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi3 {
+		/omit-if-no-ref/
+		spi3m0_pins: spi3m0-pins {
+			rockchip,pins =
+				/* spi3_clkm0 */
+				<4 RK_PB3 4 &pcfg_pull_none>,
+				/* spi3_misom0 */
+				<4 RK_PB0 4 &pcfg_pull_none>,
+				/* spi3_mosim0 */
+				<4 RK_PB2 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs0: spi3m0-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m0 */
+				<4 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs1: spi3m0-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m0 */
+				<4 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_pins: spi3m1-pins {
+			rockchip,pins =
+				/* spi3_clkm1 */
+				<4 RK_PC2 2 &pcfg_pull_none>,
+				/* spi3_misom1 */
+				<4 RK_PC5 2 &pcfg_pull_none>,
+				/* spi3_mosim1 */
+				<4 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs0: spi3m1-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m1 */
+				<4 RK_PC6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs1: spi3m1-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m1 */
+				<4 RK_PD1 2 &pcfg_pull_none>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadcm0_shut: tsadcm0-shut {
+			rockchip,pins =
+				/* tsadcm0_shut */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadcm1_shut: tsadcm1-shut {
+			rockchip,pins =
+				/* tsadcm1_shut */
+				<0 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shutorg: tsadc-shutorg {
+			rockchip,pins =
+				/* tsadc_shutorg */
+				<0 RK_PA1 2 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0_xfer: uart0-xfer {
+			rockchip,pins =
+				/* uart0_rx */
+				<0 RK_PC0 3 &pcfg_pull_up>,
+				/* uart0_tx */
+				<0 RK_PC1 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				/* uart0_ctsn */
+				<0 RK_PC7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				/* uart0_rtsn */
+				<0 RK_PC4 3 &pcfg_pull_none>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rxm0 */
+				<2 RK_PB3 2 &pcfg_pull_up>,
+				/* uart1_txm0 */
+				<2 RK_PB4 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_ctsn: uart1m0-ctsn {
+			rockchip,pins =
+				/* uart1m0_ctsn */
+				<2 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_rtsn: uart1m0-rtsn {
+			rockchip,pins =
+				/* uart1m0_rtsn */
+				<2 RK_PB5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rxm1 */
+				<3 RK_PD7 4 &pcfg_pull_up>,
+				/* uart1_txm1 */
+				<3 RK_PD6 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_ctsn: uart1m1-ctsn {
+			rockchip,pins =
+				/* uart1m1_ctsn */
+				<4 RK_PC1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_rtsn: uart1m1-rtsn {
+			rockchip,pins =
+				/* uart1m1_rtsn */
+				<4 RK_PB6 4 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rxm0 */
+				<0 RK_PD0 1 &pcfg_pull_up>,
+				/* uart2_txm0 */
+				<0 RK_PD1 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rxm1 */
+				<1 RK_PD6 2 &pcfg_pull_up>,
+				/* uart2_txm1 */
+				<1 RK_PD5 2 &pcfg_pull_up>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rxm0 */
+				<1 RK_PA0 2 &pcfg_pull_up>,
+				/* uart3_txm0 */
+				<1 RK_PA1 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m0_ctsn: uart3m0-ctsn {
+			rockchip,pins =
+				/* uart3m0_ctsn */
+				<1 RK_PA3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3m0_rtsn: uart3m0-rtsn {
+			rockchip,pins =
+				/* uart3m0_rtsn */
+				<1 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rxm1 */
+				<3 RK_PC0 4 &pcfg_pull_up>,
+				/* uart3_txm1 */
+				<3 RK_PB7 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rxm0 */
+				<1 RK_PA4 2 &pcfg_pull_up>,
+				/* uart4_txm0 */
+				<1 RK_PA6 2 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m0_ctsn: uart4m0-ctsn {
+			rockchip,pins =
+				/* uart4m0_ctsn */
+				<1 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4m0_rtsn: uart4m0-rtsn {
+			rockchip,pins =
+				/* uart4m0_rtsn */
+				<1 RK_PA5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_xfer: uart4m1-xfer {
+			rockchip,pins =
+				/* uart4_rxm1 */
+				<3 RK_PB1 4 &pcfg_pull_up>,
+				/* uart4_txm1 */
+				<3 RK_PB2 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rxm0 */
+				<2 RK_PA1 3 &pcfg_pull_up>,
+				/* uart5_txm0 */
+				<2 RK_PA2 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<1 RK_PD7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<2 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rxm1 */
+				<3 RK_PC3 4 &pcfg_pull_up>,
+				/* uart5_txm1 */
+				<3 RK_PC2 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rxm0 */
+				<2 RK_PA3 3 &pcfg_pull_up>,
+				/* uart6_txm0 */
+				<2 RK_PA4 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_ctsn: uart6m0-ctsn {
+			rockchip,pins =
+				/* uart6m0_ctsn */
+				<2 RK_PC0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_rtsn: uart6m0-rtsn {
+			rockchip,pins =
+				/* uart6m0_rtsn */
+				<2 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rxm1 */
+				<1 RK_PD6 3 &pcfg_pull_up>,
+				/* uart6_txm1 */
+				<1 RK_PD5 3 &pcfg_pull_up>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rxm0 */
+				<2 RK_PA5 3 &pcfg_pull_up>,
+				/* uart7_txm0 */
+				<2 RK_PA6 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<2 RK_PC2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<2 RK_PC1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rxm1 */
+				<3 RK_PC5 4 &pcfg_pull_up>,
+				/* uart7_txm1 */
+				<3 RK_PC4 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m2_xfer: uart7m2-xfer {
+			rockchip,pins =
+				/* uart7_rxm2 */
+				<4 RK_PA3 4 &pcfg_pull_up>,
+				/* uart7_txm2 */
+				<4 RK_PA2 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart8 {
+		/omit-if-no-ref/
+		uart8m0_xfer: uart8m0-xfer {
+			rockchip,pins =
+				/* uart8_rxm0 */
+				<2 RK_PC6 2 &pcfg_pull_up>,
+				/* uart8_txm0 */
+				<2 RK_PC5 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_ctsn: uart8m0-ctsn {
+			rockchip,pins =
+				/* uart8m0_ctsn */
+				<2 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_rtsn: uart8m0-rtsn {
+			rockchip,pins =
+				/* uart8m0_rtsn */
+				<2 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_xfer: uart8m1-xfer {
+			rockchip,pins =
+				/* uart8_rxm1 */
+				<3 RK_PA0 4 &pcfg_pull_up>,
+				/* uart8_txm1 */
+				<2 RK_PD7 4 &pcfg_pull_up>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rxm0 */
+				<2 RK_PA7 3 &pcfg_pull_up>,
+				/* uart9_txm0 */
+				<2 RK_PB0 3 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_ctsn: uart9m0-ctsn {
+			rockchip,pins =
+				/* uart9m0_ctsn */
+				<2 RK_PC4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_rtsn: uart9m0-rtsn {
+			rockchip,pins =
+				/* uart9m0_rtsn */
+				<2 RK_PC3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_xfer: uart9m1-xfer {
+			rockchip,pins =
+				/* uart9_rxm1 */
+				<4 RK_PC6 4 &pcfg_pull_up>,
+				/* uart9_txm1 */
+				<4 RK_PC5 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_xfer: uart9m2-xfer {
+			rockchip,pins =
+				/* uart9_rxm2 */
+				<4 RK_PA5 4 &pcfg_pull_up>,
+				/* uart9_txm2 */
+				<4 RK_PA4 4 &pcfg_pull_up>;
+		};
+	};
+
+	vop {
+		/omit-if-no-ref/
+		vopm0_pins: vopm0-pins {
+			rockchip,pins =
+				/* vop_pwmm0 */
+				<0 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		vopm1_pins: vopm1-pins {
+			rockchip,pins =
+				/* vop_pwmm1 */
+				<3 RK_PC4 2 &pcfg_pull_none>;
+		};
+	};
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+	spi0-hs {
+		/omit-if-no-ref/
+		spi0m0_pins_hs: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clkm0 */
+				<0 RK_PB5 2 &pcfg_pull_up_drv_level_1>,
+				/* spi0_misom0 */
+				<0 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosim0 */
+				<0 RK_PB6 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs0_hs: spi0m0-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m0 */
+				<0 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs1_hs: spi0m0-cs1 {
+			rockchip,pins =
+				/* spi0_cs1m0 */
+				<0 RK_PC4 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_pins_hs: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clkm1 */
+				<2 RK_PD3 3 &pcfg_pull_up_drv_level_1>,
+				/* spi0_misom1 */
+				<2 RK_PD0 3 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosim1 */
+				<2 RK_PD1 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs0_hs: spi0m1-cs0 {
+			rockchip,pins =
+				/* spi0_cs0m1 */
+				<2 RK_PD2 3 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi1-hs {
+		/omit-if-no-ref/
+		spi1m0_pins_hs: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clkm0 */
+				<2 RK_PB5 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_misom0 */
+				<2 RK_PB6 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosim0 */
+				<2 RK_PB7 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs0_hs: spi1m0-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m0 */
+				<2 RK_PC0 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs1_hs: spi1m0-cs1 {
+			rockchip,pins =
+				/* spi1_cs1m0 */
+				<2 RK_PC6 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_pins_hs: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clkm1 */
+				<3 RK_PC3 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_misom1 */
+				<3 RK_PC2 3 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosim1 */
+				<3 RK_PC1 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs0_hs: spi1m1-cs0 {
+			rockchip,pins =
+				/* spi1_cs0m1 */
+				<3 RK_PA1 3 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi2-hs {
+		/omit-if-no-ref/
+		spi2m0_pins_hs: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clkm0 */
+				<2 RK_PC1 4 &pcfg_pull_up_drv_level_1>,
+				/* spi2_misom0 */
+				<2 RK_PC2 4 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosim0 */
+				<2 RK_PC3 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs0_hs: spi2m0-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m0 */
+				<2 RK_PC4 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs1_hs: spi2m0-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m0 */
+				<2 RK_PC5 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins_hs: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clkm1 */
+				<3 RK_PA0 3 &pcfg_pull_up_drv_level_1>,
+				/* spi2_misom1 */
+				<2 RK_PD7 3 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosim1 */
+				<2 RK_PD6 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs0_hs: spi2m1-cs0 {
+			rockchip,pins =
+				/* spi2_cs0m1 */
+				<2 RK_PD5 3 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs1_hs: spi2m1-cs1 {
+			rockchip,pins =
+				/* spi2_cs1m1 */
+				<2 RK_PD4 3 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi3-hs {
+		/omit-if-no-ref/
+		spi3m0_pins_hs: spi3m0-pins {
+			rockchip,pins =
+				/* spi3_clkm0 */
+				<4 RK_PB3 4 &pcfg_pull_up_drv_level_1>,
+				/* spi3_misom0 */
+				<4 RK_PB0 4 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosim0 */
+				<4 RK_PB2 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs0_hs: spi3m0-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m0 */
+				<4 RK_PA6 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs1_hs: spi3m0-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m0 */
+				<4 RK_PA7 4 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_pins_hs: spi3m1-pins {
+			rockchip,pins =
+				/* spi3_clkm1 */
+				<4 RK_PC2 2 &pcfg_pull_up_drv_level_1>,
+				/* spi3_misom1 */
+				<4 RK_PC5 2 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosim1 */
+				<4 RK_PC3 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs0_hs: spi3m1-cs0 {
+			rockchip,pins =
+				/* spi3_cs0m1 */
+				<4 RK_PC6 2 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs1_hs: spi3m1-cs1 {
+			rockchip,pins =
+				/* spi3_cs1m1 */
+				<4 RK_PD1 2 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	gmac-txd-level3 {
+		/omit-if-no-ref/
+		gmac0_tx_bus2_level3: gmac0-tx-bus2-level3 {
+			rockchip,pins =
+				/* gmac0_txd0 */
+				<2 RK_PB3 1 &pcfg_pull_none_drv_level_3>,
+				/* gmac0_txd1 */
+				<2 RK_PB4 1 &pcfg_pull_none_drv_level_3>,
+				/* gmac0_txen */
+				<2 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_bus_level3: gmac0-rgmii-bus-level3 {
+			rockchip,pins =
+				/* gmac0_rxd2 */
+				<2 RK_PA3 2 &pcfg_pull_none>,
+				/* gmac0_rxd3 */
+				<2 RK_PA4 2 &pcfg_pull_none>,
+				/* gmac0_txd2 */
+				<2 RK_PA6 2 &pcfg_pull_none_drv_level_3>,
+				/* gmac0_txd3 */
+				<2 RK_PA7 2 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_tx_bus2_level3: gmac1m0-tx-bus2-level3 {
+			rockchip,pins =
+				/* gmac1_txd0m0 */
+				<3 RK_PB5 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd1m0 */
+				<3 RK_PB6 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txenm0 */
+				<3 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_bus_level3: gmac1m0-rgmii-bus-level3 {
+			rockchip,pins =
+				/* gmac1_rxd2m0 */
+				<3 RK_PA4 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m0 */
+				<3 RK_PA5 3 &pcfg_pull_none>,
+				/* gmac1_txd2m0 */
+				<3 RK_PA2 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd3m0 */
+				<3 RK_PA3 3 &pcfg_pull_none_drv_level_3>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_tx_bus2_level3: gmac1m1-tx-bus2-level3 {
+			rockchip,pins =
+				/* gmac1_txd0m1 */
+				<4 RK_PA4 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd1m1 */
+				<4 RK_PA5 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txenm1 */
+				<4 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_bus_level3: gmac1m1-rgmii-bus-level3 {
+			rockchip,pins =
+				/* gmac1_rxd2m1 */
+				<4 RK_PA1 3 &pcfg_pull_none>,
+				/* gmac1_rxd3m1 */
+				<4 RK_PA2 3 &pcfg_pull_none>,
+				/* gmac1_txd2m1 */
+				<3 RK_PD6 3 &pcfg_pull_none_drv_level_3>,
+				/* gmac1_txd3m1 */
+				<3 RK_PD7 3 &pcfg_pull_none_drv_level_3>;
+		};
+	};
+
+	gmac-txc-level2 {
+		/omit-if-no-ref/
+		gmac0_rgmii_clk_level2: gmac0-rgmii-clk-level2 {
+			rockchip,pins =
+				/* gmac0_rxclk */
+				<2 RK_PA5 2 &pcfg_pull_none>,
+				/* gmac0_txclk */
+				<2 RK_PB0 2 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m0_rgmii_clk_level2: gmac1m0-rgmii-clk-level2 {
+			rockchip,pins =
+				/* gmac1_rxclkm0 */
+				<3 RK_PA7 3 &pcfg_pull_none>,
+				/* gmac1_txclkm0 */
+				<3 RK_PA6 3 &pcfg_pull_none_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		gmac1m1_rgmii_clk_level2: gmac1m1-rgmii-clk-level2 {
+			rockchip,pins =
+				/* gmac1_rxclkm1 */
+				<4 RK_PA3 3 &pcfg_pull_none>,
+				/* gmac1_txclkm1 */
+				<4 RK_PA0 3 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadc_pin: tsadc-pin {
+			rockchip,pins =
+				/* tsadc_pin */
+				<0 RK_PA1 0 &pcfg_pull_none>;
+		};
+	};
+
+	lcdc {
+		/omit-if-no-ref/
+		lcdc_clock: lcdc-clock {
+			rockchip,pins =
+				/* lcdc_clk */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* lcdc_den */
+				<3 RK_PC3 1 &pcfg_pull_none>,
+				/* lcdc_hsync */
+				<3 RK_PC1 1 &pcfg_pull_none>,
+				/* lcdc_vsync */
+				<3 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		lcdc_data16: lcdc-data16 {
+			rockchip,pins =
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		lcdc_data18: lcdc-data18 {
+			rockchip,pins =
+				/* lcdc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_none>,
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d18 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
new file mode 100644
index 000000000..45b03dcbb
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3568.dtsi"
+
+/ {
+	compatible = "radxa,cm3i", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_user: led-0 {
+			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_user_en>;
+		};
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v_input>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v_input>;
+	};
+
+	/* labeled +5v_input in schematic */
+	vcc5v_input: vcc5v-input-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v_input";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&display_subsystem {
+	status = "disabled";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v_input>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	leds {
+		led_user_en: led_user_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
new file mode 100644
index 000000000..72ad74c38
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3568-radxa-cm3i.dtsi"
+
+/ {
+	model = "Radxa E25 Carrier Board";
+	compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
+
+	aliases {
+		mmc1 = &sdmmc0;
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds-multicolor";
+
+		multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			max-brightness = <255>;
+
+			led-red {
+				color = <LED_COLOR_ID_RED>;
+				pwms = <&pwm1 0 1000000 0>;
+			};
+
+			led-green {
+				color = <LED_COLOR_ID_GREEN>;
+				pwms = <&pwm2 0 1000000 0>;
+			};
+
+			led-blue {
+				color = <LED_COLOR_ID_BLUE>;
+				pwms = <&pwm12 0 1000000 0>;
+			};
+		};
+	};
+
+	vbus_typec: vbus-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus_typec_en>;
+		regulator-name = "vbus_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* actually fed by vcc5v0_sys, dependent
+	 * on pi6c clock generator
+	 */
+	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&minipcie_enable_h>;
+		regulator-name = "vcc3v3_minipcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_pi6c_05>;
+	};
+
+	vcc3v3_ngff: vcc3v3-ngff-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ngffpcie_enable_h>;
+		regulator-name = "vcc3v3_ngff";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie30x1_enable_h>;
+		regulator-name = "vcc3v3_pcie30x1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy1 {
+	phy-supply = <&vcc3v3_pcie30x1>;
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20_reset_h>;
+	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x1m0_pins>;
+	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2_reset_h>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcie {
+		pcie20_reset_h: pcie20-reset-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x1_enable_h: pcie30x1-enable-h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie30x2_reset_h: pcie30x2-reset-h {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		minipcie_enable_h: minipcie-enable-h {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		ngffpcie_enable_h: ngffpcie-enable-h {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vbus_typec_en: vbus_typec_en {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm12 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm12m1_pins>;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	/* Also used in pcie30x1_clkreqnm0 */
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vbus_typec>;
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc3v3_minipcie>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc3v3_ngff>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
new file mode 100644
index 000000000..e333449ea
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Firefly Station P2";
+	compatible = "firefly,rk3568-roc-pc", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	gmac0_clkin: external-gmac0-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac0_clkin";
+		#clock-cells = <0>;
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-user {
+			label = "user-led";
+			default-state = "on";
+			gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_enable_h>;
+			retain-state-suspended;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pcie";
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_pcie_en_pin>;
+		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_otg";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_otg_en>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&combphy0 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy1 {
+	/* used for USB3 */
+	status = "okay";
+};
+
+&combphy2 {
+	/* used for SATA */
+	status = "okay";
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&gmac0_clkin>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+			&gmac0_tx_bus2
+			&gmac0_rx_bus2
+			&gmac0_rgmii_clk
+			&gmac0_rgmii_bus
+			&gmac0_clkinout>;
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+			&gmac1m1_tx_bus2
+			&gmac1m1_rx_bus2
+			&gmac1m1_rgmii_clk
+			&gmac1m1_rgmii_bus
+			&gmac1m1_clkinout>;
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x26>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_pin>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		user_led_enable_h: user-led-enable-h {
+			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_otg_en: vcc5v0-otg-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_reset_pin: pcie-reset-pin {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
new file mode 100644
index 000000000..e05ab1198
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Radxa ROCK3 Model A";
+	compatible = "radxa,rock3a", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	gmac1_clkin: external-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "gmac1_clkin";
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_user: led-0 {
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_user_en>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk809 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie30_avdd1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	/* pi6c pcie clock generator */
+	vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_pi6c_03";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_enable_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_hub: vcc5v0-usb-hub-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_hub_en>;
+		regulator-name = "vcc5v0_usb_hub";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_otg_en>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc_cam: vcc-cam-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_cam_en>;
+		regulator-name = "vcc_cam";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_mipi: vcc-mipi-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_mipi_en>;
+		regulator-name = "vcc_mipi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+
+		codec {
+			mic-in-differential;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "disabled";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+	status = "disabled";
+};
+
+&i2c5 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&i2s2_2ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_reset_h>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie30phy {
+	phy-supply = <&vcc3v3_pi6c_03>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	cam {
+		vcc_cam_en: vcc_cam_en {
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	display {
+		vcc_mipi_en: vcc_mipi_en {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		eth_phy_rst: eth_phy_rst {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_user_en: led_user_en {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie_enable_h: pcie-enable-h {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_reset_h: pcie-reset-h {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bt {
+		bt_enable: bt-enable {
+			rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake: bt-host-wake {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bt_wake: bt-wake {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sys>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk809 1>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
+		vbat-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+		/* vddio comes from regulator on module, use IO bank voltage instead */
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
new file mode 100644
index 000000000..f1be76a54
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk356x.dtsi"
+
+/ {
+	compatible = "rockchip,rk3568";
+
+	sata0: sata@fc000000 {
+		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfc000000 0 0x1000>;
+		clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
+			 <&cru CLK_SATA0_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&combphy0 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
+	qos_pcie3x1: qos@fe190080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190080 0x0 0x20>;
+	};
+
+	qos_pcie3x2: qos@fe190100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190100 0x0 0x20>;
+	};
+
+	qos_sata0: qos@fe190200 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190200 0x0 0x20>;
+	};
+
+	pcie30_phy_grf: syscon@fdcb8000 {
+		compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfdcb8000 0x0 0x10000>;
+	};
+
+	pcie30phy: phy@fe8c0000 {
+		compatible = "rockchip,rk3568-pcie3-phy";
+		reg = <0x0 0xfe8c0000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>,
+			 <&cru PCLK_PCIE30PHY>;
+		clock-names = "refclk_m", "refclk_n", "pclk";
+		resets = <&cru SRST_PCIE30PHY>;
+		reset-names = "phy";
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+
+	pcie3x1: pcie@fe270000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>,
+			 <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>,
+			 <&cru CLK_PCIE30X1_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x1_intc 0>,
+				<0 0 0 2 &pcie3x1_intc 1>,
+				<0 0 0 3 &pcie3x1_intc 2>,
+				<0 0 0 4 &pcie3x1_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x1000 0x1000>;
+		num-lanes = <1>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0400000 0x0 0x00400000>,
+		      <0x0 0xfe270000 0x0 0x00010000>,
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x40000000 0x0 0x40000000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X1_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane1 when using 1+1 */
+		status = "disabled";
+
+		pcie3x1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pcie3x2: pcie@fe280000 {
+		compatible = "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
+			 <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
+			 <&cru CLK_PCIE30X2_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <2>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <3>;
+		msi-map = <0x0 &gic 0x2000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		reg = <0x3 0xc0800000 0x0 0x00400000>,
+		      <0x0 0xfe280000 0x0 0x00010000>,
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x80000000 0x0 0x40000000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE30X2_POWERUP>;
+		reset-names = "pipe";
+		/* bifurcation; lane0 when using 1+1 */
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	gmac0: ethernet@fe2a0000 {
+		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe2a0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>,
+			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>,
+			 <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>,
+			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac",
+			      "clk_mac_speed", "ptp_ref";
+		resets = <&cru SRST_A_GMAC0>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,axi-config = <&gmac0_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio0: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac0_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <8>;
+			snps,wr_osr_lmt = <4>;
+		};
+
+		gmac0_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <1>;
+			queue0 {};
+		};
+
+		gmac0_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <1>;
+			queue0 {};
+		};
+	};
+
+	combphy0: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>,
+			 <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY0>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+};
+
+&cpu0_opp_table {
+	opp-1992000000 {
+		opp-hz = /bits/ 64 <1992000000>;
+		opp-microvolt = <1150000 1150000 1150000>;
+	};
+};
+
+&pipegrf {
+	compatible = "rockchip,rk3568-pipe-grf", "syscon";
+};
+
+&power {
+	power-domain@RK3568_PD_PIPE {
+		reg = <RK3568_PD_PIPE>;
+		clocks = <&cru PCLK_PIPE>;
+		pm_qos = <&qos_pcie2x1>,
+			 <&qos_pcie3x1>,
+			 <&qos_pcie3x2>,
+			 <&qos_sata0>,
+			 <&qos_sata1>,
+			 <&qos_sata2>,
+			 <&qos_usb3_0>,
+			 <&qos_usb3_1>;
+		#power-domain-cells = <0>;
+	};
+};
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+};
+
+&vop {
+	compatible = "rockchip,rk3568-vop";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
new file mode 100644
index 000000000..b7e2b475f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -0,0 +1,1879 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rk3568-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3568-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial7 = &uart7;
+		serial8 = &uart8;
+		serial9 = &uart9;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			clocks = <&scmi_clk 0>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <900000 900000 1150000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000 900000 1150000>;
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000 900000 1150000>;
+			opp-suspend;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <900000 900000 1150000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <900000 900000 1150000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <975000 975000 1150000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1050000 1050000 1150000>;
+		};
+	};
+
+	display_subsystem: display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
+	firmware {
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82000010>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		status = "disabled";
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		arm,no-tick-in-suspend;
+	};
+
+	xin24m: xin24m {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	xin32k: xin32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		pinctrl-0 = <&clk32k_out0>;
+		pinctrl-names = "default";
+		#clock-cells = <0>;
+	};
+
+	sram@10f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x0010f000 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x0010f000 0x100>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	sata1: sata@fc400000 {
+		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfc400000 0 0x1000>;
+		clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
+			 <&cru CLK_SATA1_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&combphy1 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
+	sata2: sata@fc800000 {
+		compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfc800000 0 0x1000>;
+		clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
+			 <&cru CLK_SATA2_RXOOB>;
+		clock-names = "sata", "pmalive", "rxoob";
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&combphy2 PHY_TYPE_SATA>;
+		phy-names = "sata-phy";
+		ports-implemented = <0x1>;
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+	};
+
+	usb_host0_xhci: usb@fcc00000 {
+		compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+		reg = <0x0 0xfcc00000 0x0 0x400000>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3568_PD_PIPE>;
+		resets = <&cru SRST_USB3OTG0>;
+		snps,dis_u2_susphy_quirk;
+		status = "disabled";
+	};
+
+	usb_host1_xhci: usb@fd000000 {
+		compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+		reg = <0x0 0xfd000000 0x0 0x400000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		dr_mode = "host";
+		phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
+		phy-names = "usb2-phy", "usb3-phy";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3568_PD_PIPE>;
+		resets = <&cru SRST_USB3OTG1>;
+		snps,dis_u2_susphy_quirk;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@fd400000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
+		      <0x0 0xfd460000 0 0x80000>; /* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		mbi-alias = <0x0 0xfd410000>;
+		mbi-ranges = <296 24>;
+		msi-controller;
+	};
+
+	usb_host0_ehci: usb@fd800000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfd800000 0x0 0x40000>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fd840000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfd840000 0x0 0x40000>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fd880000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfd880000 0x0 0x40000>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fd8c0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfd8c0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	pmugrf: syscon@fdc20000 {
+		compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
+		reg = <0x0 0xfdc20000 0x0 0x10000>;
+
+		pmu_io_domains: io-domains {
+			compatible = "rockchip,rk3568-pmu-io-voltage-domain";
+			status = "disabled";
+		};
+	};
+
+	pipegrf: syscon@fdc50000 {
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
+	grf: syscon@fdc60000 {
+		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfdc60000 0x0 0x10000>;
+	};
+
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
+	usb2phy0_grf: syscon@fdca0000 {
+		compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+		reg = <0x0 0xfdca0000 0x0 0x8000>;
+	};
+
+	usb2phy1_grf: syscon@fdca8000 {
+		compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+		reg = <0x0 0xfdca8000 0x0 0x8000>;
+	};
+
+	pmucru: clock-controller@fdd00000 {
+		compatible = "rockchip,rk3568-pmucru";
+		reg = <0x0 0xfdd00000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@fdd20000 {
+		compatible = "rockchip,rk3568-cru";
+		reg = <0x0 0xfdd20000 0x0 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, <&pmucru PLL_PPLL>;
+		assigned-clock-rates = <32768>, <1200000000>, <200000000>;
+		assigned-clock-parents = <&pmucru CLK_RTC32K_FRAC>;
+		rockchip,grf = <&grf>;
+	};
+
+	i2c0: i2c@fdd40000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfdd40000 0x0 0x1000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru CLK_I2C0>, <&pmucru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@fdd50000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfdd50000 0x0 0x100>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0>, <&pmucru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		pinctrl-0 = <&uart0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@fdd70000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70000 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm0m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@fdd70010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70010 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm1m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@fdd70020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70020 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm2m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@fdd70030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfdd70030 0x0 0x10>;
+		clocks = <&pmucru CLK_PWM0>, <&pmucru PCLK_PWM0>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmu: power-management@fdd90000 {
+		compatible = "rockchip,rk3568-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xfdd90000 0x0 0x1000>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3568-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* These power domains are grouped by VD_GPU */
+			power-domain@RK3568_PD_GPU {
+				reg = <RK3568_PD_GPU>;
+				clocks = <&cru ACLK_GPU_PRE>,
+					 <&cru PCLK_GPU_PRE>;
+				pm_qos = <&qos_gpu>;
+				#power-domain-cells = <0>;
+			};
+
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@RK3568_PD_VI {
+				reg = <RK3568_PD_VI>;
+				clocks = <&cru HCLK_VI>,
+					 <&cru PCLK_VI>;
+				pm_qos = <&qos_isp>,
+					 <&qos_vicap0>,
+					 <&qos_vicap1>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_VO {
+				reg = <RK3568_PD_VO>;
+				clocks = <&cru HCLK_VO>,
+					 <&cru PCLK_VO>,
+					 <&cru ACLK_VOP_PRE>;
+				pm_qos = <&qos_hdcp>,
+					 <&qos_vop_m0>,
+					 <&qos_vop_m1>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_RGA {
+				reg = <RK3568_PD_RGA>;
+				clocks = <&cru HCLK_RGA_PRE>,
+					 <&cru PCLK_RGA_PRE>;
+				pm_qos = <&qos_ebc>,
+					 <&qos_iep>,
+					 <&qos_jpeg_dec>,
+					 <&qos_jpeg_enc>,
+					 <&qos_rga_rd>,
+					 <&qos_rga_wr>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_VPU {
+				reg = <RK3568_PD_VPU>;
+				clocks = <&cru HCLK_VPU_PRE>;
+				pm_qos = <&qos_vpu>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_RKVDEC {
+				clocks = <&cru HCLK_RKVDEC_PRE>;
+				reg = <RK3568_PD_RKVDEC>;
+				pm_qos = <&qos_rkvdec>;
+				#power-domain-cells = <0>;
+			};
+
+			power-domain@RK3568_PD_RKVENC {
+				reg = <RK3568_PD_RKVENC>;
+				clocks = <&cru HCLK_RKVENC_PRE>;
+				pm_qos = <&qos_rkvenc_rd_m0>,
+					 <&qos_rkvenc_rd_m1>,
+					 <&qos_rkvenc_wr_m0>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	gpu: gpu@fde60000 {
+		compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
+		reg = <0x0 0xfde60000 0x0 0x4000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
+		clock-names = "gpu", "bus";
+		#cooling-cells = <2>;
+		operating-points-v2 = <&gpu_opp_table>;
+		power-domains = <&power RK3568_PD_GPU>;
+		status = "disabled";
+	};
+
+	vpu: video-codec@fdea0400 {
+		compatible = "rockchip,rk3568-vpu";
+		reg = <0x0 0xfdea0000 0x0 0x800>;
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vdpu_mmu>;
+		power-domains = <&power RK3568_PD_VPU>;
+	};
+
+	vdpu_mmu: iommu@fdea0800 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdea0800 0x0 0x40>;
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "aclk", "iface";
+		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+		power-domains = <&power RK3568_PD_VPU>;
+		#iommu-cells = <0>;
+	};
+
+	rga: rga@fdeb0000 {
+		compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga";
+		reg = <0x0 0xfdeb0000 0x0 0x180>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+		reset-names = "core", "axi", "ahb";
+		power-domains = <&power RK3568_PD_RGA>;
+	};
+
+	vepu: video-codec@fdee0000 {
+		compatible = "rockchip,rk3568-vepu";
+		reg = <0x0 0xfdee0000 0x0 0x800>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+		clock-names = "aclk", "hclk";
+		iommus = <&vepu_mmu>;
+		power-domains = <&power RK3568_PD_RGA>;
+	};
+
+	vepu_mmu: iommu@fdee0800 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdee0800 0x0 0x40>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power RK3568_PD_RGA>;
+		#iommu-cells = <0>;
+	};
+
+	sdmmc2: mmc@fe000000 {
+		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC2>, <&cru CLK_SDMMC2>,
+			 <&cru SCLK_SDMMC2_DRV>, <&cru SCLK_SDMMC2_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC2>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	gmac1: ethernet@fe010000 {
+		compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe010000 0x0 0x10000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru SCLK_GMAC1>, <&cru SCLK_GMAC1_RX_TX>,
+			 <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_MAC1_REFOUT>,
+			 <&cru ACLK_GMAC1>, <&cru PCLK_GMAC1>,
+			 <&cru SCLK_GMAC1_RX_TX>, <&cru CLK_GMAC1_PTP_REF>;
+		clock-names = "stmmaceth", "mac_clk_rx",
+			      "mac_clk_tx", "clk_mac_refout",
+			      "aclk_mac", "pclk_mac",
+			      "clk_mac_speed", "ptp_ref";
+		resets = <&cru SRST_A_GMAC1>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&grf>;
+		snps,axi-config = <&gmac1_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio1: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac1_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,rd_osr_lmt = <8>;
+			snps,wr_osr_lmt = <4>;
+		};
+
+		gmac1_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <1>;
+			queue0 {};
+		};
+
+		gmac1_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <1>;
+			queue0 {};
+		};
+	};
+
+	vop: vop@fe040000 {
+		reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+		reg-names = "vop", "gamma-lut";
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>, <&cru DCLK_VOP0>,
+			 <&cru DCLK_VOP1>, <&cru DCLK_VOP2>;
+		clock-names = "aclk", "hclk", "dclk_vp0", "dclk_vp1", "dclk_vp2";
+		iommus = <&vop_mmu>;
+		power-domains = <&power RK3568_PD_VO>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		vop_out: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vp0: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp1: port@1 {
+				reg = <1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			vp2: port@2 {
+				reg = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@fe043e00 {
+		compatible = "rockchip,rk3568-iommu";
+		reg = <0x0 0xfe043e00 0x0 0x100>, <0x0 0xfe043f00 0x0 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@fe060000 {
+		compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x00 0xfe060000 0x00 0x10000>;
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "pclk";
+		clocks = <&cru PCLK_DSITX_0>;
+		phy-names = "dphy";
+		phys = <&dsi_dphy0>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_DSITX_0>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi0_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dsi1: dsi@fe070000 {
+		compatible = "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x0 0xfe070000 0x0 0x10000>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "pclk";
+		clocks = <&cru PCLK_DSITX_1>;
+		phy-names = "dphy";
+		phys = <&dsi_dphy1>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_DSITX_1>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi1_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	hdmi: hdmi@fe0a0000 {
+		compatible = "rockchip,rk3568-dw-hdmi";
+		reg = <0x0 0xfe0a0000 0x0 0x20000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_HDMI_HOST>,
+			 <&cru CLK_HDMI_SFR>,
+			 <&cru CLK_HDMI_CEC>,
+			 <&pmucru CLK_HDMI_REF>,
+			 <&cru HCLK_VO>;
+		clock-names = "iahb", "isfr", "cec", "ref";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm0_cec>;
+		power-domains = <&power RK3568_PD_VO>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi_in: port@0 {
+				reg = <0>;
+			};
+
+			hdmi_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	qos_gpu: qos@fe128000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe128000 0x0 0x20>;
+	};
+
+	qos_rkvenc_rd_m0: qos@fe138080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe138080 0x0 0x20>;
+	};
+
+	qos_rkvenc_rd_m1: qos@fe138100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe138100 0x0 0x20>;
+	};
+
+	qos_rkvenc_wr_m0: qos@fe138180 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe138180 0x0 0x20>;
+	};
+
+	qos_isp: qos@fe148000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe148000 0x0 0x20>;
+	};
+
+	qos_vicap0: qos@fe148080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe148080 0x0 0x20>;
+	};
+
+	qos_vicap1: qos@fe148100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe148100 0x0 0x20>;
+	};
+
+	qos_vpu: qos@fe150000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe150000 0x0 0x20>;
+	};
+
+	qos_ebc: qos@fe158000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158000 0x0 0x20>;
+	};
+
+	qos_iep: qos@fe158100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158100 0x0 0x20>;
+	};
+
+	qos_jpeg_dec: qos@fe158180 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158180 0x0 0x20>;
+	};
+
+	qos_jpeg_enc: qos@fe158200 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158200 0x0 0x20>;
+	};
+
+	qos_rga_rd: qos@fe158280 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158280 0x0 0x20>;
+	};
+
+	qos_rga_wr: qos@fe158300 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe158300 0x0 0x20>;
+	};
+
+	qos_npu: qos@fe180000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe180000 0x0 0x20>;
+	};
+
+	qos_pcie2x1: qos@fe190000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190000 0x0 0x20>;
+	};
+
+	qos_sata1: qos@fe190280 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190280 0x0 0x20>;
+	};
+
+	qos_sata2: qos@fe190300 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190300 0x0 0x20>;
+	};
+
+	qos_usb3_0: qos@fe190380 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190380 0x0 0x20>;
+	};
+
+	qos_usb3_1: qos@fe190400 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe190400 0x0 0x20>;
+	};
+
+	qos_rkvdec: qos@fe198000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe198000 0x0 0x20>;
+	};
+
+	qos_hdcp: qos@fe1a8000 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe1a8000 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@fe1a8080 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe1a8080 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@fe1a8100 {
+		compatible = "rockchip,rk3568-qos", "syscon";
+		reg = <0x0 0xfe1a8100 0x0 0x20>;
+	};
+
+	pcie2x1: pcie@fe260000 {
+		compatible = "rockchip,rk3568-pcie";
+		reg = <0x3 0xc0000000 0x0 0x00400000>,
+		      <0x0 0xfe260000 0x0 0x00010000>,
+		      <0x0 0xf4000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		bus-range = <0x0 0xf>;
+		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
+			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
+			 <&cru CLK_PCIE20_AUX_NDFT>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk", "aux";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 0>,
+				<0 0 0 2 &pcie_intc 1>,
+				<0 0 0 3 &pcie_intc 2>,
+				<0 0 0 4 &pcie_intc 3>;
+		linux,pci-domain = <0>;
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		max-link-speed = <2>;
+		msi-map = <0x0 &gic 0x0 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy2 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x01e00000>,
+			 <0x03000000 0x0 0x40000000 0x3 0x00000000 0x0 0x40000000>;
+		resets = <&cru SRST_PCIE20_POWERUP>;
+		reset-names = "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie_intc: legacy-interrupt-controller {
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	sdmmc0: mmc@fe2b0000 {
+		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2b0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC0>, <&cru CLK_SDMMC0>,
+			 <&cru SCLK_SDMMC0_DRV>, <&cru SCLK_SDMMC0_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC0>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sdmmc1: mmc@fe2c0000 {
+		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC1>, <&cru CLK_SDMMC1>,
+			 <&cru SCLK_SDMMC1_DRV>, <&cru SCLK_SDMMC1_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <150000000>;
+		resets = <&cru SRST_SDMMC1>;
+		reset-names = "reset";
+		status = "disabled";
+	};
+
+	sfc: spi@fe300000 {
+		compatible = "rockchip,sfc";
+		reg = <0x0 0xfe300000 0x0 0x4000>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+		clock-names = "clk_sfc", "hclk_sfc";
+		pinctrl-0 = <&fspi_pins>;
+		pinctrl-names = "default";
+		status = "disabled";
+	};
+
+	sdhci: mmc@fe310000 {
+		compatible = "rockchip,rk3568-dwcmshc";
+		reg = <0x0 0xfe310000 0x0 0x10000>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru BCLK_EMMC>, <&cru TCLK_EMMC>;
+		assigned-clock-rates = <200000000>, <24000000>;
+		clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+			 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+			 <&cru TCLK_EMMC>;
+		clock-names = "core", "bus", "axi", "block", "timer";
+		status = "disabled";
+	};
+
+	i2s0_8ch: i2s@fe400000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe400000 0x0 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+		assigned-clock-rates = <1188000000>, <1188000000>;
+		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 0>;
+		dma-names = "tx";
+		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_8ch: i2s@fe410000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe410000 0x0 0x1000>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S1_8CH_TX_SRC>, <&cru CLK_I2S1_8CH_RX_SRC>;
+		assigned-clock-rates = <1188000000>, <1188000000>;
+		clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
+			 <&cru HCLK_I2S1_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 3>, <&dmac1 2>;
+		dma-names = "rx", "tx";
+		resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_sclkrx
+			     &i2s1m0_lrcktx &i2s1m0_lrckrx
+			     &i2s1m0_sdi0   &i2s1m0_sdi1
+			     &i2s1m0_sdi2   &i2s1m0_sdi3
+			     &i2s1m0_sdo0   &i2s1m0_sdo1
+			     &i2s1m0_sdo2   &i2s1m0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@fe420000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe420000 0x0 0x1000>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-rates = <1188000000>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 4>, <&dmac1 5>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S2_2CH>;
+		reset-names = "m";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m0_sclktx
+				&i2s2m0_lrcktx
+				&i2s2m0_sdi
+				&i2s2m0_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s3_2ch: i2s@fe430000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe430000 0x0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>,
+			 <&cru HCLK_I2S3_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 6>, <&dmac1 7>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pdm: pdm@fe440000 {
+		compatible = "rockchip,rk3568-pdm";
+		reg = <0x0 0xfe440000 0x0 0x1000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac1 9>;
+		dma-names = "rx";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_clk1
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-names = "default";
+		resets = <&cru SRST_M_PDM>;
+		reset-names = "pdm-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	spdif: spdif@fe460000 {
+		compatible = "rockchip,rk3568-spdif";
+		reg = <0x0 0xfe460000 0x0 0x1000>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clock-names = "mclk", "hclk";
+		clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>;
+		dmas = <&dmac1 1>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdifm0_tx>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	dmac0: dma-controller@fe530000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfe530000 0x0 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_BUS>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	dmac1: dma-controller@fe550000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfe550000 0x0 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_BUS>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	i2c1: i2c@fe5a0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c1_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@fe5b0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5b0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c2m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@fe5c0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5c0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c3m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@fe5d0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5d0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c4m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@fe5e0000 {
+		compatible = "rockchip,rk3568-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfe5e0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c5m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@fe600000 {
+		compatible = "rockchip,rk3568-wdt", "snps,dw-wdt";
+		reg = <0x0 0xfe600000 0x0 0x100>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru TCLK_WDT_NS>, <&cru PCLK_WDT_NS>;
+		clock-names = "tclk", "pclk";
+	};
+
+	spi0: spi@fe610000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe610000 0x0 0x1000>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 20>, <&dmac0 21>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@fe620000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe620000 0x0 0x1000>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 22>, <&dmac0 23>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@fe630000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe630000 0x0 0x1000>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 24>, <&dmac0 25>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2m0_cs0 &spi2m0_cs1 &spi2m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@fe640000 {
+		compatible = "rockchip,rk3568-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfe640000 0x0 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 26>, <&dmac0 27>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3m0_cs0 &spi3m0_cs1 &spi3m0_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@fe650000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe650000 0x0 0x100>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		pinctrl-0 = <&uart1m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@fe660000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe660000 0x0 0x100>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 4>, <&dmac0 5>;
+		pinctrl-0 = <&uart2m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart3: serial@fe670000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe670000 0x0 0x100>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 6>, <&dmac0 7>;
+		pinctrl-0 = <&uart3m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart4: serial@fe680000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe680000 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 8>, <&dmac0 9>;
+		pinctrl-0 = <&uart4m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart5: serial@fe690000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe690000 0x0 0x100>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 10>, <&dmac0 11>;
+		pinctrl-0 = <&uart5m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart6: serial@fe6a0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6a0000 0x0 0x100>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 12>, <&dmac0 13>;
+		pinctrl-0 = <&uart6m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart7: serial@fe6b0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6b0000 0x0 0x100>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 14>, <&dmac0 15>;
+		pinctrl-0 = <&uart7m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart8: serial@fe6c0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6c0000 0x0 0x100>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 16>, <&dmac0 17>;
+		pinctrl-0 = <&uart8m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart9: serial@fe6d0000 {
+		compatible = "rockchip,rk3568-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfe6d0000 0x0 0x100>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 18>, <&dmac0 19>;
+		pinctrl-0 = <&uart9m0_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	thermal_zones: thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <20>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_threshold: gpu-threshold {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_target: gpu-target {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_target>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@fe710000 {
+		compatible = "rockchip,rk3568-tsadc";
+		reg = <0x0 0xfe710000 0x0 0x100>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>;
+		assigned-clock-rates = <17000000>, <700000>;
+		clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>,
+			 <&cru SRST_TSADCPHY>;
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <95000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_pin>;
+		pinctrl-1 = <&tsadc_shutorg>;
+		pinctrl-2 = <&tsadc_pin>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: saradc@fe720000 {
+		compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc";
+		reg = <0x0 0xfe720000 0x0 0x100>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@fe6e0000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm4_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@fe6e0010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm5_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@fe6e0020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm6_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@fe6e0030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6e0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm7_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@fe6f0000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm8m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@fe6f0010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm9m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@fe6f0020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm10m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@fe6f0030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe6f0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm11m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm12: pwm@fe700000 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700000 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm12m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm13: pwm@fe700010 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700010 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm13m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm14: pwm@fe700020 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700020 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm14m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm15: pwm@fe700030 {
+		compatible = "rockchip,rk3568-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfe700030 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm15m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	combphy1: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>,
+			 <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY1>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	combphy2: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>,
+			 <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY2>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	csi_dphy: phy@fe870000 {
+		compatible = "rockchip,rk3568-csi-dphy";
+		reg = <0x0 0xfe870000 0x0 0x10000>;
+		clocks = <&cru PCLK_MIPICSIPHY>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_P_MIPICSIPHY>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
+	dsi_dphy0: mipi-dphy@fe850000 {
+		compatible = "rockchip,rk3568-dsi-dphy";
+		reg = <0x0 0xfe850000 0x0 0x10000>;
+		clock-names = "ref", "pclk";
+		clocks = <&pmucru CLK_MIPIDSIPHY0_REF>, <&cru PCLK_MIPIDSIPHY0>;
+		#phy-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_MIPIDSIPHY0>;
+		status = "disabled";
+	};
+
+	dsi_dphy1: mipi-dphy@fe860000 {
+		compatible = "rockchip,rk3568-dsi-dphy";
+		reg = <0x0 0xfe860000 0x0 0x10000>;
+		clock-names = "ref", "pclk";
+		clocks = <&pmucru CLK_MIPIDSIPHY1_REF>, <&cru PCLK_MIPIDSIPHY1>;
+		#phy-cells = <0>;
+		power-domains = <&power RK3568_PD_VO>;
+		reset-names = "apb";
+		resets = <&cru SRST_P_MIPIDSIPHY1>;
+		status = "disabled";
+	};
+
+	usb2phy0: usb2phy@fe8a0000 {
+		compatible = "rockchip,rk3568-usb2phy";
+		reg = <0x0 0xfe8a0000 0x0 0x10000>;
+		clocks = <&pmucru CLK_USBPHY0_REF>;
+		clock-names = "phyclk";
+		clock-output-names = "clk_usbphy0_480m";
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,usbgrf = <&usb2phy0_grf>;
+		#clock-cells = <0>;
+		status = "disabled";
+
+		usb2phy0_host: host-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2phy0_otg: otg-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	usb2phy1: usb2phy@fe8b0000 {
+		compatible = "rockchip,rk3568-usb2phy";
+		reg = <0x0 0xfe8b0000 0x0 0x10000>;
+		clocks = <&pmucru CLK_USBPHY1_REF>;
+		clock-names = "phyclk";
+		clock-output-names = "clk_usbphy1_480m";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,usbgrf = <&usb2phy1_grf>;
+		#clock-cells = <0>;
+		status = "disabled";
+
+		usb2phy1_host: host-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2phy1_otg: otg-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3568-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmugrf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@fdd60000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfdd60000 0x0 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@fe740000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe740000 0x0 0x100>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@fe750000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe750000 0x0 0x100>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@fe760000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe760000 0x0 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@fe770000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfe770000 0x0 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rk3568-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
new file mode 100644
index 000000000..b51543892
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rk3588.dtsi"
+#include "rk3588-edgeble-neu6a.dtsi"
+
+/ {
+	model = "Edgeble Neu6A IO Board";
+	compatible = "edgeble,neural-compute-module-6a-io",
+		     "edgeble,neural-compute-module-6a", "rockchip,rk3588";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
new file mode 100644
index 000000000..727580aaa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
new file mode 100644
index 000000000..9933765e4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rk3588j.dtsi"
+#include "rk3588-edgeble-neu6b.dtsi"
+
+/ {
+	model = "Edgeble Neu6B IO Board";
+	compatible = "edgeble,neural-compute-module-6b-io",
+		     "edgeble,neural-compute-module-6b", "rockchip,rk3588";
+
+	aliases {
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* FAN */
+&pwm2 {
+	pinctrl-0 = <&pwm2m1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* RS232 */
+&uart6 {
+	pinctrl-0 = <&uart6m0_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* RS485 */
+&uart7 {
+	pinctrl-0 = <&uart7m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi
new file mode 100644
index 000000000..017559bba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b.dtsi
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/ {
+	compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-init-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
new file mode 100644
index 000000000..229a9111f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -0,0 +1,847 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Rockchip RK3588 EVB1 V10 Board";
+	compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm2 0 25000 0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usbdcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	pinctrl-names = "default";
+	rx_delay = <0x00>;
+	tx_delay = <0x43>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&mdio0 {
+	rgmii_phy: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <2>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc5v0_sys>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_gpu_mem_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+				regulator-name = "vdd_gpu_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vdd_npu_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vdd_vdenc_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v1_nldo_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v1_nldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1100000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd1_1v8_ddr_s3: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd1_1v8_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_codec_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avcc_1v8_codec_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s3: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_1v8_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd2l_0v9_ddr_s3: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd2l_0v9_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_0v75_hdmi_edp_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_hdmi_edp_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	pmic@1 {
+		compatible = "rockchip,rk806";
+		reg = <0x01>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
+			    <&rk806_slave_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_2v0_pldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_slave_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_slave_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_cpu_big1_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big0_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_big1_mem_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big1_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+
+			vdd_cpu_big0_mem_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big0_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_mem_s0: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_mem_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_cam_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_1v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd1v8_ddr_pll_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd1v8_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_1v8_pll_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_1v8_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_sd_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_2v8_cam_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_2v8_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_pll_s0: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_0v75_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_cam_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_cam_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_1v2_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "avdd_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
new file mode 100644
index 000000000..97af4f912
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2023 Thomas McKahan
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T6";
+	compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_led: led-0 {
+			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+			label = "system-led";
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sys_led_pin>;
+		};
+
+		usr_led: led-1 {
+			gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+			label = "user-led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usr_led_pin>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_det>;
+
+		simple-audio-card,name = "realtek,rt5616-codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-pin-name = "Headphones";
+
+		simple-audio-card,widgets =
+			"Headphone", "Headphones",
+			"Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"MIC1", "Microphone Jack",
+			"Microphone Jack", "micbias1";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	/* vcc5v0_sys powers peripherals */
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	/* vcc4v0_sys powers the RK806, RK860's */
+	vcc4v0_sys: vcc4v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc4v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-1v1-nldo-s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc4v0_sys>;
+	};
+
+	vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_pcie20";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vbus5v0_typec: vbus5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_m2_1_pwren>;
+		regulator-name = "vcc3v3_pcie2x1l0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_m2_0_pwren>;
+		regulator-name = "vcc3v3_pcie30";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0{
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1{
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2{
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3{
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 C0-C7 */
+			  "", "", "", "",
+			  "HEADER_10", "HEADER_08", "HEADER_32", "",
+			  /* GPIO0 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_27", "HEADER_28", "", "",
+			  "", "", "", "HEADER_15",
+			  /* GPIO1 B0-B7 */
+			  "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
+			  "HEADER_24", "HEADER_22", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "HEADER_05", "HEADER_03";
+};
+
+&gpio2 {
+	gpio-line-names = /* GPIO2 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO2 C0-C7 */
+			  "", "CSI1_11", "CSI1_12", "",
+			  "", "", "", "",
+			  /* GPIO2 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
+			  "HEADER_37", "", "DSI0_12", "",
+			  /* GPIO3 B0-B7 */
+			  "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
+			  "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
+			  /* GPIO3 C0-C7 */
+			  "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
+			  "", "", "", "",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "",
+			  "", "DSI1_10", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A0-A7 */
+			  "DSI1_08", "DSI1_14", "", "DSI1_12",
+			  "", "", "", "",
+			  /* GPIO4 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO4 C0-C7 */
+			  "", "", "", "",
+			  "CSI0_11", "CSI0_12", "", "",
+			  /* GPIO4 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		rockchip,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc4v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc0_int>;
+		pinctrl-names = "default";
+		vbus-supply = <&vbus5v0_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <1000000>;
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	clock-frequency = <200000>;
+	status = "okay";
+
+	rt5616: codec@1b {
+		compatible = "realtek,rt5616";
+		reg = <0x1b>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+
+		port {
+			rt5616_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+
+	/* connected with MIPI-CSI1 */
+};
+
+&i2c8 {
+	pinctrl-0 = <&i2c8m2_xfer>;
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&rt5616_p0_0>;
+		};
+	};
+};
+
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>;
+	status = "okay";
+};
+
+&pcie2x1l1 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_1_rst>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_pcie20>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		sys_led_pin: sys-led-pin {
+			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usr_led_pin: usr-led-pin {
+			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_1_rst: pcie2-1-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_m2_0_pwren: pcie-m20-pwren {
+			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie_m2_1_pwren: pcie-m21-pwren {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-0 = <&pwm1m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc4v0_sys>;
+		vcc2-supply = <&vcc4v0_sys>;
+		vcc3-supply = <&vcc4v0_sys>;
+		vcc4-supply = <&vcc4v0_sys>;
+		vcc5-supply = <&vcc4v0_sys>;
+		vcc6-supply = <&vcc4v0_sys>;
+		vcc7-supply = <&vcc4v0_sys>;
+		vcc8-supply = <&vcc4v0_sys>;
+		vcc9-supply = <&vcc4v0_sys>;
+		vcc10-supply = <&vcc4v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc4v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc4v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-init-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+};
+
+&u2phy3_host {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi
new file mode 100644
index 000000000..244c66faa
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-pinctrl.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	clk32k {
+		/omit-if-no-ref/
+		clk32k_out1: clk32k-out1 {
+			rockchip,pins =
+				/* clk32k_out1 */
+				<2 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+	};
+
+	eth0 {
+		/omit-if-no-ref/
+		eth0_pins: eth0-pins {
+			rockchip,pins =
+				/* eth0_refclko_25m */
+				<2 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspim1_pins: fspim1-pins {
+			rockchip,pins =
+				/* fspi_clk_m1 */
+				<2 RK_PB3 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_cs0n_m1 */
+				<2 RK_PB4 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d0_m1 */
+				<2 RK_PA6 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d1_m1 */
+				<2 RK_PA7 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d2_m1 */
+				<2 RK_PB0 3 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d3_m1 */
+				<2 RK_PB1 3 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim1_cs1: fspim1-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n_m1 */
+				<2 RK_PB5 3 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+
+	gmac0 {
+		/omit-if-no-ref/
+		gmac0_miim: gmac0-miim {
+			rockchip,pins =
+				/* gmac0_mdc */
+				<4 RK_PC4 1 &pcfg_pull_none>,
+				/* gmac0_mdio */
+				<4 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_clkinout: gmac0-clkinout {
+			rockchip,pins =
+				/* gmac0_mclkinout */
+				<4 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rx_bus2: gmac0-rx-bus2 {
+			rockchip,pins =
+				/* gmac0_rxd0 */
+				<2 RK_PC1 1 &pcfg_pull_none>,
+				/* gmac0_rxd1 */
+				<2 RK_PC2 1 &pcfg_pull_none>,
+				/* gmac0_rxdv_crs */
+				<4 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_tx_bus2: gmac0-tx-bus2 {
+			rockchip,pins =
+				/* gmac0_txd0 */
+				<2 RK_PB6 1 &pcfg_pull_none>,
+				/* gmac0_txd1 */
+				<2 RK_PB7 1 &pcfg_pull_none>,
+				/* gmac0_txen */
+				<2 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_clk: gmac0-rgmii-clk {
+			rockchip,pins =
+				/* gmac0_rxclk */
+				<2 RK_PB0 1 &pcfg_pull_none>,
+				/* gmac0_txclk */
+				<2 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_rgmii_bus: gmac0-rgmii-bus {
+			rockchip,pins =
+				/* gmac0_rxd2 */
+				<2 RK_PA6 1 &pcfg_pull_none>,
+				/* gmac0_rxd3 */
+				<2 RK_PA7 1 &pcfg_pull_none>,
+				/* gmac0_txd2 */
+				<2 RK_PB1 1 &pcfg_pull_none>,
+				/* gmac0_txd3 */
+				<2 RK_PB2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_ppsclk: gmac0-ppsclk {
+			rockchip,pins =
+				/* gmac0_ppsclk */
+				<2 RK_PC4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_ppstring: gmac0-ppstring {
+			rockchip,pins =
+				/* gmac0_ppstring */
+				<2 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_ptp_refclk: gmac0-ptp-refclk {
+			rockchip,pins =
+				/* gmac0_ptp_refclk */
+				<2 RK_PB4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac0_txer: gmac0-txer {
+			rockchip,pins =
+				/* gmac0_txer */
+				<4 RK_PC6 1 &pcfg_pull_none>;
+		};
+
+	};
+
+	hdmi {
+		/omit-if-no-ref/
+		hdmim0_tx1_cec: hdmim0-tx1-cec {
+			rockchip,pins =
+				/* hdmim0_tx1_cec */
+				<2 RK_PC4 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx1_scl: hdmim0-tx1-scl {
+			rockchip,pins =
+				/* hdmim0_tx1_scl */
+				<2 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx1_sda: hdmim0-tx1-sda {
+			rockchip,pins =
+				/* hdmim0_tx1_sda */
+				<2 RK_PB4 4 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0m1_xfer: i2c0m1-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m1 */
+				<4 RK_PC5 9 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m1 */
+				<4 RK_PC6 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m1_xfer: i2c2m1-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m1 */
+				<2 RK_PC1 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m1 */
+				<2 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m3_xfer: i2c3m3-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m3 */
+				<2 RK_PB2 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m3 */
+				<2 RK_PB3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m1_xfer: i2c4m1-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m1 */
+				<2 RK_PB5 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m1 */
+				<2 RK_PB4 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m4_xfer: i2c5m4-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m4 */
+				<2 RK_PB6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m4 */
+				<2 RK_PB7 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c6 {
+		/omit-if-no-ref/
+		i2c6m2_xfer: i2c6m2-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m2 */
+				<2 RK_PC3 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m2 */
+				<2 RK_PC2 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c7 {
+		/omit-if-no-ref/
+		i2c7m1_xfer: i2c7m1-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m1 */
+				<4 RK_PC3 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m1 */
+				<4 RK_PC4 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c8 {
+		/omit-if-no-ref/
+		i2c8m1_xfer: i2c8m1-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m1 */
+				<2 RK_PB0 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m1 */
+				<2 RK_PB1 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m0_lrck: i2s2m0-lrck {
+			rockchip,pins =
+				/* i2s2m0_lrck */
+				<2 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_mclk: i2s2m0-mclk {
+			rockchip,pins =
+				/* i2s2m0_mclk */
+				<2 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sclk: i2s2m0-sclk {
+			rockchip,pins =
+				/* i2s2m0_sclk */
+				<2 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdi: i2s2m0-sdi {
+			rockchip,pins =
+				/* i2s2m0_sdi */
+				<2 RK_PC3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m0_sdo: i2s2m0-sdo {
+			rockchip,pins =
+				/* i2s2m0_sdo */
+				<4 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m2_pins: pwm2m2-pins {
+			rockchip,pins =
+				/* pwm2_m2 */
+				<4 RK_PC2 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m1_pins: pwm4m1-pins {
+			rockchip,pins =
+				/* pwm4_m1 */
+				<4 RK_PC3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m2_pins: pwm5m2-pins {
+			rockchip,pins =
+				/* pwm5_m2 */
+				<4 RK_PC4 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m2_pins: pwm6m2-pins {
+			rockchip,pins =
+				/* pwm6_m2 */
+				<4 RK_PC5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m3_pins: pwm7m3-pins {
+			rockchip,pins =
+				/* pwm7_ir_m3 */
+				<4 RK_PC6 11 &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		/omit-if-no-ref/
+		sdiom0_pins: sdiom0-pins {
+			rockchip,pins =
+				/* sdio_clk_m0 */
+				<2 RK_PB3 2 &pcfg_pull_none>,
+				/* sdio_cmd_m0 */
+				<2 RK_PB2 2 &pcfg_pull_none>,
+				/* sdio_d0_m0 */
+				<2 RK_PA6 2 &pcfg_pull_none>,
+				/* sdio_d1_m0 */
+				<2 RK_PA7 2 &pcfg_pull_none>,
+				/* sdio_d2_m0 */
+				<2 RK_PB0 2 &pcfg_pull_none>,
+				/* sdio_d3_m0 */
+				<2 RK_PB1 2 &pcfg_pull_none>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m0_pins: spi1m0-pins {
+			rockchip,pins =
+				/* spi1_clk_m0 */
+				<2 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_miso_m0 */
+				<2 RK_PC1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosi_m0 */
+				<2 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs0: spi1m0-cs0 {
+			rockchip,pins =
+				/* spi1_cs0_m0 */
+				<2 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m0_cs1: spi1m0-cs1 {
+			rockchip,pins =
+				/* spi1_cs1_m0 */
+				<2 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi3 {
+		/omit-if-no-ref/
+		spi3m0_pins: spi3m0-pins {
+			rockchip,pins =
+				/* spi3_clk_m0 */
+				<4 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m0 */
+				<4 RK_PC4 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m0 */
+				<4 RK_PC5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs0: spi3m0-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m0 */
+				<4 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m0_cs1: spi3m0-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m0 */
+				<4 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m0_xfer: uart1m0-xfer {
+			rockchip,pins =
+				/* uart1_rx_m0 */
+				<2 RK_PB6 10 &pcfg_pull_up>,
+				/* uart1_tx_m0 */
+				<2 RK_PB7 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_ctsn: uart1m0-ctsn {
+			rockchip,pins =
+				/* uart1m0_ctsn */
+				<2 RK_PC1 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m0_rtsn: uart1m0-rtsn {
+			rockchip,pins =
+				/* uart1m0_rtsn */
+				<2 RK_PC0 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m0_xfer: uart6m0-xfer {
+			rockchip,pins =
+				/* uart6_rx_m0 */
+				<2 RK_PA6 10 &pcfg_pull_up>,
+				/* uart6_tx_m0 */
+				<2 RK_PA7 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_ctsn: uart6m0-ctsn {
+			rockchip,pins =
+				/* uart6m0_ctsn */
+				<2 RK_PB1 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m0_rtsn: uart6m0-rtsn {
+			rockchip,pins =
+				/* uart6m0_rtsn */
+				<2 RK_PB0 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m0_xfer: uart7m0-xfer {
+			rockchip,pins =
+				/* uart7_rx_m0 */
+				<2 RK_PB4 10 &pcfg_pull_up>,
+				/* uart7_tx_m0 */
+				<2 RK_PB5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_ctsn: uart7m0-ctsn {
+			rockchip,pins =
+				/* uart7m0_ctsn */
+				<4 RK_PC6 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m0_rtsn: uart7m0-rtsn {
+			rockchip,pins =
+				/* uart7m0_rtsn */
+				<4 RK_PC2 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m0_xfer: uart9m0-xfer {
+			rockchip,pins =
+				/* uart9_rx_m0 */
+				<2 RK_PC4 10 &pcfg_pull_up>,
+				/* uart9_tx_m0 */
+				<2 RK_PC2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_ctsn: uart9m0-ctsn {
+			rockchip,pins =
+				/* uart9m0_ctsn */
+				<4 RK_PC5 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m0_rtsn: uart9m0-rtsn {
+			rockchip,pins =
+				/* uart9m0_rtsn */
+				<4 RK_PC4 10 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
new file mode 100644
index 000000000..8ab60968f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Radxa ROCK 5 Model B";
+	compatible = "radxa,rock-5b", "rockchip,rk3588";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+		hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hp_detect>;
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm1 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sound {
+		hp_detect: hp-detect {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	max-frequency = <200000000>;
+	no-sdio;
+	no-mmc;
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	num-cs = <1>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		spi-max-frequency = <1000000>;
+		reg = <0x0>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_log_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_vdenc_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_2v0_pldo_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "avcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "avdd_1v2_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vcc_3v3_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vccio_sd_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "pldo6_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_ddr_pll_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdd_0v85_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s0";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	/* connected to USB hub, which is powered by vcc5v0_sys */
+	phy-supply = <&vcc5v0_sys>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
new file mode 100644
index 000000000..5519c1430
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3588s.dtsi"
+#include "rk3588-pinctrl.dtsi"
+
+/ {
+	pcie30_phy_grf: syscon@fd5b8000 {
+		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfd5b8000 0x0 0x10000>;
+	};
+
+	pipe_phy1_grf: syscon@fd5c0000 {
+		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfd5c0000 0x0 0x100>;
+	};
+
+	i2s8_8ch: i2s@fddc8000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddc8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 22>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_M_I2S8_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s6_8ch: i2s@fddf4000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf4000 0x0 0x1000>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 4>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S6_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s7_8ch: i2s@fddf8000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf8000 0x0 0x1000>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 21>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S7_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s10_8ch: i2s@fde00000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfde00000 0x0 0x1000>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 24>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S10_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pcie3x4: pcie@fe150000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0x0f>;
+		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
+				<0 0 0 2 &pcie3x4_intc 1>,
+				<0 0 0 3 &pcie3x4_intc 2>,
+				<0 0 0 4 &pcie3x4_intc 3>;
+		linux,pci-domain = <0>;
+		max-link-speed = <3>;
+		msi-map = <0x0000 &its1 0x0000 0x1000>;
+		num-lanes = <4>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
+		reg = <0xa 0x40000000 0x0 0x00400000>,
+		      <0x0 0xfe150000 0x0 0x00010000>,
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+		reset-names = "pwr", "pipe";
+		status = "disabled";
+
+		pcie3x4_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie3x2: pcie@fe160000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x10 0x1f>;
+		clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
+			 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
+			 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <1>;
+		max-link-speed = <3>;
+		msi-map = <0x1000 &its1 0x1000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
+		reg = <0xa 0x40400000 0x0 0x00400000>,
+		      <0x0 0xfe160000 0x0 0x00010000>,
+		      <0x0 0xf1000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+		reset-names = "pwr", "pipe";
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie2x1l0: pcie@fe170000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x20 0x2f>;
+		clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
+			 <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
+			 <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
+				<0 0 0 2 &pcie2x1l0_intc 1>,
+				<0 0 0 3 &pcie2x1l0_intc 2>,
+				<0 0 0 4 &pcie2x1l0_intc 3>;
+		linux,pci-domain = <2>;
+		max-link-speed = <2>;
+		msi-map = <0x2000 &its0 0x2000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy1_ps PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
+		reg = <0xa 0x40800000 0x0 0x00400000>,
+		      <0x0 0xfe170000 0x0 0x00010000>,
+		      <0x0 0xf2000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l0_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	gmac0: ethernet@fe1b0000 {
+		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe1b0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+			 <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
+			 <&cru CLK_GMAC0_PTP_REF>;
+		clock-names = "stmmaceth", "clk_mac_ref",
+			      "pclk_mac", "aclk_mac",
+			      "ptp_ref";
+		power-domains = <&power RK3588_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC0>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&sys_grf>;
+		rockchip,php-grf = <&php_grf>;
+		snps,axi-config = <&gmac0_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio0: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac0_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <8>;
+		};
+
+		gmac0_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+
+		gmac0_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+	};
+
+	sata1: sata@fe220000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe220000 0 0x1000>;
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+			 <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
+			 <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy1_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	combphy1_ps: phy@fee10000 {
+		compatible = "rockchip,rk3588-naneng-combphy";
+		reg = <0x0 0xfee10000 0x0 0x100>;
+		clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
+			 <&cru PCLK_PHP_ROOT>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
+		assigned-clock-rates = <100000000>;
+		#phy-cells = <1>;
+		resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
+		reset-names = "phy", "apb";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+		status = "disabled";
+	};
+
+	pcie30phy: phy@fee80000 {
+		compatible = "rockchip,rk3588-pcie3-phy";
+		reg = <0x0 0xfee80000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
+		clock-names = "pclk";
+		resets = <&cru SRST_PCIE30_PHY>;
+		reset-names = "phy";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
new file mode 100644
index 000000000..38b9dbf38
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+#include "rk3588.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
new file mode 100644
index 000000000..d1503a4b2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -0,0 +1,761 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Indiedroid Nova";
+	compatible = "indiedroid,nova", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clock-names = "ext_clock";
+		clocks = <&rtc_hym8563>;
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "rockchip,es8388-codec";
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+		routing = "LINPUT2", "Mic Jack",
+			  "Headphones", "LOUT1",
+			  "Headphones", "ROUT1";
+		dais = <&i2s0_8ch_p0>;
+	};
+
+	vbus5v0_typec: vbus5v0-typec-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&typec5v_pwren>;
+		pinctrl-names = "default";
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1100000>;
+		regulator-min-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	/* Regulator is enabled whenever vcc_1v8_s0 is above 1.6v */
+	vcc_3v3_s0: vcc-3v3-s0-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc_3v3_s0";
+		vin-supply = <&vcc_3v3_s3>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_sys";
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usb";
+		vin-supply = <&vcc5v0_usbdcin>;
+	};
+
+	vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "vcc5v0_usbdcin";
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+/*
+ * Add labels for each GPIO pin exposed on the 40 pin header. Note that
+ * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
+ * label).
+ */
+&gpio0 {
+	gpio-line-names = /* GPIO0 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 B0-B7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO0 D0-D7 */
+			  "HEADER_12_1v8", "", "", "HEADER_24_1v8",
+			  "", "", "", "";
+};
+
+&gpio1 {
+	gpio-line-names = /* GPIO1 A0-A7 */
+			  "HEADER_27_3v3", "HEADER_28_3v3", "", "",
+			  "HEADER_29_1v8", "", "HEADER_7_1v8", "",
+			  /* GPIO1 B0-B7 */
+			  "", "HEADER_31_1v8", "HEADER_33_1v8", "",
+			  "HEADER_11_1v8", "HEADER_13_1v8", "", "",
+			  /* GPIO1 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO1 D0-D7 */
+			  "", "", "", "",
+			  "", "", "HEADER_5_3v3", "HEADER_3_3v3";
+};
+
+&gpio3 {
+	gpio-line-names = /* GPIO3 A0-A7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO3 B0-B7 */
+			  "HEADER_16_1v8", "HEADER_18_1v8", "", "",
+			  "", "", "", "HEADER_19_1v8",
+			  /* GPIO3 C0-C7 */
+			  "HEADER_21_1v8", "HEADER_23_1v8", "", "HEADER_26_1v8",
+			  "HEADER_15_1v8", "HEADER_22_1v8", "", "",
+			  /* GPIO3 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = /* GPIO4 A0-A7 */
+			  "", "", "HEADER_37_3v3", "HEADER_32_3v3",
+			  "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
+			  /* GPIO4 B0-B7 */
+			  "", "", "", "HEADER_40_3v3",
+			  "HEADER_8_3v3", "HEADER_10_3v3", "", "",
+			  /* GPIO4 C0-C7 */
+			  "", "", "", "",
+			  "", "", "", "",
+			  /* GPIO4 D0-D7 */
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m2_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1050000>;
+		regulator-min-microvolt = <550000>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1050000>;
+		regulator-min-microvolt = <550000>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <950000>;
+		regulator-min-microvolt = <550000>;
+		regulator-name = "vdd_npu_s0";
+		regulator-ramp-delay = <2300>;
+		fcs,suspend-voltage-selector = <1>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	status = "okay";
+
+	fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc0_int>;
+		pinctrl-names = "default";
+		vbus-supply = <&vbus5v0_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <1000000>;
+		};
+	};
+
+	rtc_hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&hym8563_int>;
+		pinctrl-names = "default";
+		wakeup-source;
+	};
+};
+
+&i2c7 {
+	pinctrl-0 = <&i2c7m0_xfer>;
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388";
+		reg = <0x11>;
+		assigned-clock-rates = <12288000>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		AVDD-supply = <&vcc_3v3_s3>;
+		clock-names = "mclk";
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		DVDD-supply = <&vcc_1v8_s3>;
+		HPVDD-supply = <&vcc_3v3_s3>;
+		PVDD-supply = <&vcc_1v8_s3>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8388_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8388_p0_0>;
+		};
+	};
+};
+
+&pinctrl {
+	bluetooth-pins {
+		bt_reset: bt-reset {
+			rockchip,pins =
+				<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_dev: bt-wake-dev {
+			rockchip,pins =
+				<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins =
+				<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	hym8563 {
+
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		usbc0_int: usbc0-int {
+			rockchip,pins =
+				<0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins =
+				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+/* HS400 modes seemed to cause io errors. */
+&sdhci {
+	bus-width = <8>;
+	no-mmc-hs400;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3_s0>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	max-frequency = <100000000>;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	#address-cells = <1>;
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
+	pinctrl-names = "default";
+	#size-cells = <0>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: dcdc-reg1 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <550000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <550000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <675000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <550000>;
+				regulator-name = "vdd_vdenc_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <850000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2000000>;
+				regulator-min-microvolt = <2000000>;
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <600000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3_pldo6: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3_pldo6";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <750000>;
+				regulator-min-microvolt = <750000>;
+				regulator-name = "avdd_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Schematics show not in use */
+			nldo-reg5 {
+			};
+		};
+	};
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+/* DMA seems to interfere with bluetooth device normal operation. */
+&uart9 {
+	pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
+	pinctrl-names = "default";
+	/delete-property/ dma-names;
+	/delete-property/ dmas;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8821cs-bt",
+			     "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
+		pinctrl-names = "default";
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
new file mode 100644
index 000000000..82478a452
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Khadas Edge2";
+	compatible = "khadas,edge2", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
new file mode 100644
index 000000000..0933652ba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-pinctrl.dtsi
@@ -0,0 +1,3403 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rockchip-pinconf.dtsi"
+
+/*
+ * This file is auto generated by pin2dts tool, please keep these code
+ * by adding changes at end of this file.
+ */
+&pinctrl {
+	auddsm {
+		/omit-if-no-ref/
+		auddsm_pins: auddsm-pins {
+			rockchip,pins =
+				/* auddsm_ln */
+				<3 RK_PA1 4 &pcfg_pull_none>,
+				/* auddsm_lp */
+				<3 RK_PA2 4 &pcfg_pull_none>,
+				/* auddsm_rn */
+				<3 RK_PA3 4 &pcfg_pull_none>,
+				/* auddsm_rp */
+				<3 RK_PA4 4 &pcfg_pull_none>;
+		};
+	};
+
+	bt1120 {
+		/omit-if-no-ref/
+		bt1120_pins: bt1120-pins {
+			rockchip,pins =
+				/* bt1120_clkout */
+				<4 RK_PB0 2 &pcfg_pull_none>,
+				/* bt1120_d0 */
+				<4 RK_PA0 2 &pcfg_pull_none>,
+				/* bt1120_d1 */
+				<4 RK_PA1 2 &pcfg_pull_none>,
+				/* bt1120_d2 */
+				<4 RK_PA2 2 &pcfg_pull_none>,
+				/* bt1120_d3 */
+				<4 RK_PA3 2 &pcfg_pull_none>,
+				/* bt1120_d4 */
+				<4 RK_PA4 2 &pcfg_pull_none>,
+				/* bt1120_d5 */
+				<4 RK_PA5 2 &pcfg_pull_none>,
+				/* bt1120_d6 */
+				<4 RK_PA6 2 &pcfg_pull_none>,
+				/* bt1120_d7 */
+				<4 RK_PA7 2 &pcfg_pull_none>,
+				/* bt1120_d8 */
+				<4 RK_PB2 2 &pcfg_pull_none>,
+				/* bt1120_d9 */
+				<4 RK_PB3 2 &pcfg_pull_none>,
+				/* bt1120_d10 */
+				<4 RK_PB4 2 &pcfg_pull_none>,
+				/* bt1120_d11 */
+				<4 RK_PB5 2 &pcfg_pull_none>,
+				/* bt1120_d12 */
+				<4 RK_PB6 2 &pcfg_pull_none>,
+				/* bt1120_d13 */
+				<4 RK_PB7 2 &pcfg_pull_none>,
+				/* bt1120_d14 */
+				<4 RK_PC0 2 &pcfg_pull_none>,
+				/* bt1120_d15 */
+				<4 RK_PC1 2 &pcfg_pull_none>;
+		};
+	};
+
+	can0 {
+		/omit-if-no-ref/
+		can0m0_pins: can0m0-pins {
+			rockchip,pins =
+				/* can0_rx_m0 */
+				<0 RK_PC0 11 &pcfg_pull_none>,
+				/* can0_tx_m0 */
+				<0 RK_PB7 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can0m1_pins: can0m1-pins {
+			rockchip,pins =
+				/* can0_rx_m1 */
+				<4 RK_PD5 9 &pcfg_pull_none>,
+				/* can0_tx_m1 */
+				<4 RK_PD4 9 &pcfg_pull_none>;
+		};
+	};
+
+	can1 {
+		/omit-if-no-ref/
+		can1m0_pins: can1m0-pins {
+			rockchip,pins =
+				/* can1_rx_m0 */
+				<3 RK_PB5 9 &pcfg_pull_none>,
+				/* can1_tx_m0 */
+				<3 RK_PB6 9 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can1m1_pins: can1m1-pins {
+			rockchip,pins =
+				/* can1_rx_m1 */
+				<4 RK_PB2 12 &pcfg_pull_none>,
+				/* can1_tx_m1 */
+				<4 RK_PB3 12 &pcfg_pull_none>;
+		};
+	};
+
+	can2 {
+		/omit-if-no-ref/
+		can2m0_pins: can2m0-pins {
+			rockchip,pins =
+				/* can2_rx_m0 */
+				<3 RK_PC4 9 &pcfg_pull_none>,
+				/* can2_tx_m0 */
+				<3 RK_PC5 9 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		can2m1_pins: can2m1-pins {
+			rockchip,pins =
+				/* can2_rx_m1 */
+				<0 RK_PD4 10 &pcfg_pull_none>,
+				/* can2_tx_m1 */
+				<0 RK_PD5 10 &pcfg_pull_none>;
+		};
+	};
+
+	cif {
+		/omit-if-no-ref/
+		cif_clk: cif-clk {
+			rockchip,pins =
+				/* cif_clkout */
+				<4 RK_PB4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_clk: cif-dvp-clk {
+			rockchip,pins =
+				/* cif_clkin */
+				<4 RK_PB0 1 &pcfg_pull_none>,
+				/* cif_href */
+				<4 RK_PB2 1 &pcfg_pull_none>,
+				/* cif_vsync */
+				<4 RK_PB3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus16: cif-dvp-bus16 {
+			rockchip,pins =
+				/* cif_d8 */
+				<3 RK_PC4 1 &pcfg_pull_none>,
+				/* cif_d9 */
+				<3 RK_PC5 1 &pcfg_pull_none>,
+				/* cif_d10 */
+				<3 RK_PC6 1 &pcfg_pull_none>,
+				/* cif_d11 */
+				<3 RK_PC7 1 &pcfg_pull_none>,
+				/* cif_d12 */
+				<3 RK_PD0 1 &pcfg_pull_none>,
+				/* cif_d13 */
+				<3 RK_PD1 1 &pcfg_pull_none>,
+				/* cif_d14 */
+				<3 RK_PD2 1 &pcfg_pull_none>,
+				/* cif_d15 */
+				<3 RK_PD3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		cif_dvp_bus8: cif-dvp-bus8 {
+			rockchip,pins =
+				/* cif_d0 */
+				<4 RK_PA0 1 &pcfg_pull_none>,
+				/* cif_d1 */
+				<4 RK_PA1 1 &pcfg_pull_none>,
+				/* cif_d2 */
+				<4 RK_PA2 1 &pcfg_pull_none>,
+				/* cif_d3 */
+				<4 RK_PA3 1 &pcfg_pull_none>,
+				/* cif_d4 */
+				<4 RK_PA4 1 &pcfg_pull_none>,
+				/* cif_d5 */
+				<4 RK_PA5 1 &pcfg_pull_none>,
+				/* cif_d6 */
+				<4 RK_PA6 1 &pcfg_pull_none>,
+				/* cif_d7 */
+				<4 RK_PA7 1 &pcfg_pull_none>;
+		};
+	};
+
+	clk32k {
+		/omit-if-no-ref/
+		clk32k_in: clk32k-in {
+			rockchip,pins =
+				/* clk32k_in */
+				<0 RK_PB2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		clk32k_out0: clk32k-out0 {
+			rockchip,pins =
+				/* clk32k_out0 */
+				<0 RK_PB2 2 &pcfg_pull_none>;
+		};
+	};
+
+	cpu {
+		/omit-if-no-ref/
+		cpu_pins: cpu-pins {
+			rockchip,pins =
+				/* cpu_big0_avs */
+				<0 RK_PD1 2 &pcfg_pull_none>,
+				/* cpu_big1_avs */
+				<0 RK_PD5 2 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych0 {
+		/omit-if-no-ref/
+		ddrphych0_pins: ddrphych0-pins {
+			rockchip,pins =
+				/* ddrphych0_dtb0 */
+				<4 RK_PA0 7 &pcfg_pull_none>,
+				/* ddrphych0_dtb1 */
+				<4 RK_PA1 7 &pcfg_pull_none>,
+				/* ddrphych0_dtb2 */
+				<4 RK_PA2 7 &pcfg_pull_none>,
+				/* ddrphych0_dtb3 */
+				<4 RK_PA3 7 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych1 {
+		/omit-if-no-ref/
+		ddrphych1_pins: ddrphych1-pins {
+			rockchip,pins =
+				/* ddrphych1_dtb0 */
+				<4 RK_PA4 7 &pcfg_pull_none>,
+				/* ddrphych1_dtb1 */
+				<4 RK_PA5 7 &pcfg_pull_none>,
+				/* ddrphych1_dtb2 */
+				<4 RK_PA6 7 &pcfg_pull_none>,
+				/* ddrphych1_dtb3 */
+				<4 RK_PA7 7 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych2 {
+		/omit-if-no-ref/
+		ddrphych2_pins: ddrphych2-pins {
+			rockchip,pins =
+				/* ddrphych2_dtb0 */
+				<4 RK_PB0 7 &pcfg_pull_none>,
+				/* ddrphych2_dtb1 */
+				<4 RK_PB1 7 &pcfg_pull_none>,
+				/* ddrphych2_dtb2 */
+				<4 RK_PB2 7 &pcfg_pull_none>,
+				/* ddrphych2_dtb3 */
+				<4 RK_PB3 7 &pcfg_pull_none>;
+		};
+	};
+
+	ddrphych3 {
+		/omit-if-no-ref/
+		ddrphych3_pins: ddrphych3-pins {
+			rockchip,pins =
+				/* ddrphych3_dtb0 */
+				<4 RK_PB4 7 &pcfg_pull_none>,
+				/* ddrphych3_dtb1 */
+				<4 RK_PB5 7 &pcfg_pull_none>,
+				/* ddrphych3_dtb2 */
+				<4 RK_PB6 7 &pcfg_pull_none>,
+				/* ddrphych3_dtb3 */
+				<4 RK_PB7 7 &pcfg_pull_none>;
+		};
+	};
+
+	dp0 {
+		/omit-if-no-ref/
+		dp0m0_pins: dp0m0-pins {
+			rockchip,pins =
+				/* dp0_hpdin_m0 */
+				<4 RK_PB4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp0m1_pins: dp0m1-pins {
+			rockchip,pins =
+				/* dp0_hpdin_m1 */
+				<0 RK_PC4 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp0m2_pins: dp0m2-pins {
+			rockchip,pins =
+				/* dp0_hpdin_m2 */
+				<1 RK_PA0 5 &pcfg_pull_none>;
+		};
+	};
+
+	dp1 {
+		/omit-if-no-ref/
+		dp1m0_pins: dp1m0-pins {
+			rockchip,pins =
+				/* dp1_hpdin_m0 */
+				<3 RK_PD5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp1m1_pins: dp1m1-pins {
+			rockchip,pins =
+				/* dp1_hpdin_m1 */
+				<0 RK_PC5 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		dp1m2_pins: dp1m2-pins {
+			rockchip,pins =
+				/* dp1_hpdin_m2 */
+				<1 RK_PA1 5 &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		/omit-if-no-ref/
+		emmc_rstnout: emmc-rstnout {
+			rockchip,pins =
+				/* emmc_rstn */
+				<2 RK_PA3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins =
+				/* emmc_d0 */
+				<2 RK_PD0 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d1 */
+				<2 RK_PD1 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_up_drv_level_2>,
+				/* emmc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_clk: emmc-clk {
+			rockchip,pins =
+				/* emmc_clkout */
+				<2 RK_PA1 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_cmd: emmc-cmd {
+			rockchip,pins =
+				/* emmc_cmd */
+				<2 RK_PA0 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		emmc_data_strobe: emmc-data-strobe {
+			rockchip,pins =
+				/* emmc_data_strobe */
+				<2 RK_PA2 1 &pcfg_pull_down>;
+		};
+	};
+
+	eth1 {
+		/omit-if-no-ref/
+		eth1_pins: eth1-pins {
+			rockchip,pins =
+				/* eth1_refclko_25m */
+				<3 RK_PA6 1 &pcfg_pull_none>;
+		};
+	};
+
+	fspi {
+		/omit-if-no-ref/
+		fspim0_pins: fspim0-pins {
+			rockchip,pins =
+				/* fspi_clk_m0 */
+				<2 RK_PA0 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_cs0n_m0 */
+				<2 RK_PD6 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d0_m0 */
+				<2 RK_PD0 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d1_m0 */
+				<2 RK_PD1 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d2_m0 */
+				<2 RK_PD2 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d3_m0 */
+				<2 RK_PD3 2 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim0_cs1: fspim0-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n_m0 */
+				<2 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim2_pins: fspim2-pins {
+			rockchip,pins =
+				/* fspi_clk_m2 */
+				<3 RK_PA5 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_cs0n_m2 */
+				<3 RK_PC4 2 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d0_m2 */
+				<3 RK_PA0 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d1_m2 */
+				<3 RK_PA1 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d2_m2 */
+				<3 RK_PA2 5 &pcfg_pull_up_drv_level_2>,
+				/* fspi_d3_m2 */
+				<3 RK_PA3 5 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		fspim2_cs1: fspim2-cs1 {
+			rockchip,pins =
+				/* fspi_cs1n_m2 */
+				<3 RK_PC5 2 &pcfg_pull_up_drv_level_2>;
+		};
+	};
+
+	gmac1 {
+		/omit-if-no-ref/
+		gmac1_miim: gmac1-miim {
+			rockchip,pins =
+				/* gmac1_mdc */
+				<3 RK_PC2 1 &pcfg_pull_none>,
+				/* gmac1_mdio */
+				<3 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_clkinout: gmac1-clkinout {
+			rockchip,pins =
+				/* gmac1_mclkinout */
+				<3 RK_PB6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_rx_bus2: gmac1-rx-bus2 {
+			rockchip,pins =
+				/* gmac1_rxd0 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* gmac1_rxd1 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* gmac1_rxdv_crs */
+				<3 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_tx_bus2: gmac1-tx-bus2 {
+			rockchip,pins =
+				/* gmac1_txd0 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* gmac1_txd1 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* gmac1_txen */
+				<3 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_rgmii_clk: gmac1-rgmii-clk {
+			rockchip,pins =
+				/* gmac1_rxclk */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* gmac1_txclk */
+				<3 RK_PA4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_rgmii_bus: gmac1-rgmii-bus {
+			rockchip,pins =
+				/* gmac1_rxd2 */
+				<3 RK_PA2 1 &pcfg_pull_none>,
+				/* gmac1_rxd3 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* gmac1_txd2 */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* gmac1_txd3 */
+				<3 RK_PA1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_ppsclk: gmac1-ppsclk {
+			rockchip,pins =
+				/* gmac1_ppsclk */
+				<3 RK_PC1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_ppstrig: gmac1-ppstrig {
+			rockchip,pins =
+				/* gmac1_ppstrig */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_ptp_ref_clk: gmac1-ptp-ref-clk {
+			rockchip,pins =
+				/* gmac1_ptp_ref_clk */
+				<3 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		gmac1_txer: gmac1-txer {
+			rockchip,pins =
+				/* gmac1_txer */
+				<3 RK_PB2 1 &pcfg_pull_none>;
+		};
+	};
+
+	gpu {
+		/omit-if-no-ref/
+		gpu_pins: gpu-pins {
+			rockchip,pins =
+				/* gpu_avs */
+				<0 RK_PC5 2 &pcfg_pull_none>;
+		};
+	};
+
+	hdmi {
+		/omit-if-no-ref/
+		hdmim0_rx_cec: hdmim0-rx-cec {
+			rockchip,pins =
+				/* hdmim0_rx_cec */
+				<4 RK_PB5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_rx_hpdin: hdmim0-rx-hpdin {
+			rockchip,pins =
+				/* hdmim0_rx_hpdin */
+				<4 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_rx_scl: hdmim0-rx-scl {
+			rockchip,pins =
+				/* hdmim0_rx_scl */
+				<0 RK_PD2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_rx_sda: hdmim0-rx-sda {
+			rockchip,pins =
+				/* hdmim0_rx_sda */
+				<0 RK_PD1 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_cec: hdmim0-tx0-cec {
+			rockchip,pins =
+				/* hdmim0_tx0_cec */
+				<4 RK_PC1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_hpd: hdmim0-tx0-hpd {
+			rockchip,pins =
+				/* hdmim0_tx0_hpd */
+				<1 RK_PA5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_scl: hdmim0-tx0-scl {
+			rockchip,pins =
+				/* hdmim0_tx0_scl */
+				<4 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx0_sda: hdmim0-tx0-sda {
+			rockchip,pins =
+				/* hdmim0_tx0_sda */
+				<4 RK_PC0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim0_tx1_hpd: hdmim0-tx1-hpd {
+			rockchip,pins =
+				/* hdmim0_tx1_hpd */
+				<1 RK_PA6 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		hdmim1_rx_cec: hdmim1-rx-cec {
+			rockchip,pins =
+				/* hdmim1_rx_cec */
+				<3 RK_PD1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_rx_hpdin: hdmim1-rx-hpdin {
+			rockchip,pins =
+				/* hdmim1_rx_hpdin */
+				<3 RK_PD4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_rx_scl: hdmim1-rx-scl {
+			rockchip,pins =
+				/* hdmim1_rx_scl */
+				<3 RK_PD2 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_rx_sda: hdmim1-rx-sda {
+			rockchip,pins =
+				/* hdmim1_rx_sda */
+				<3 RK_PD3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_cec: hdmim1-tx0-cec {
+			rockchip,pins =
+				/* hdmim1_tx0_cec */
+				<0 RK_PD1 13 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_hpd: hdmim1-tx0-hpd {
+			rockchip,pins =
+				/* hdmim1_tx0_hpd */
+				<3 RK_PD4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_scl: hdmim1-tx0-scl {
+			rockchip,pins =
+				/* hdmim1_tx0_scl */
+				<0 RK_PD5 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx0_sda: hdmim1-tx0-sda {
+			rockchip,pins =
+				/* hdmim1_tx0_sda */
+				<0 RK_PD4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_cec: hdmim1-tx1-cec {
+			rockchip,pins =
+				/* hdmim1_tx1_cec */
+				<0 RK_PD2 13 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_hpd: hdmim1-tx1-hpd {
+			rockchip,pins =
+				/* hdmim1_tx1_hpd */
+				<3 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_scl: hdmim1-tx1-scl {
+			rockchip,pins =
+				/* hdmim1_tx1_scl */
+				<3 RK_PC6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim1_tx1_sda: hdmim1-tx1-sda {
+			rockchip,pins =
+				/* hdmim1_tx1_sda */
+				<3 RK_PC5 5 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		hdmim2_rx_cec: hdmim2-rx-cec {
+			rockchip,pins =
+				/* hdmim2_rx_cec */
+				<1 RK_PB7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_rx_hpdin: hdmim2-rx-hpdin {
+			rockchip,pins =
+				/* hdmim2_rx_hpdin */
+				<1 RK_PB6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_rx_scl: hdmim2-rx-scl {
+			rockchip,pins =
+				/* hdmim2_rx_scl */
+				<1 RK_PD6 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_rx_sda: hdmim2-rx-sda {
+			rockchip,pins =
+				/* hdmim2_rx_sda */
+				<1 RK_PD7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx0_scl: hdmim2-tx0-scl {
+			rockchip,pins =
+				/* hdmim2_tx0_scl */
+				<3 RK_PC7 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx0_sda: hdmim2-tx0-sda {
+			rockchip,pins =
+				/* hdmim2_tx0_sda */
+				<3 RK_PD0 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx1_cec: hdmim2-tx1-cec {
+			rockchip,pins =
+				/* hdmim2_tx1_cec */
+				<3 RK_PC4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx1_scl: hdmim2-tx1-scl {
+			rockchip,pins =
+				/* hdmim2_tx1_scl */
+				<1 RK_PA4 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmim2_tx1_sda: hdmim2-tx1-sda {
+			rockchip,pins =
+				/* hdmim2_tx1_sda */
+				<1 RK_PA3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug0: hdmi-debug0 {
+			rockchip,pins =
+				/* hdmi_debug0 */
+				<1 RK_PA7 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug1: hdmi-debug1 {
+			rockchip,pins =
+				/* hdmi_debug1 */
+				<1 RK_PB0 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug2: hdmi-debug2 {
+			rockchip,pins =
+				/* hdmi_debug2 */
+				<1 RK_PB1 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug3: hdmi-debug3 {
+			rockchip,pins =
+				/* hdmi_debug3 */
+				<1 RK_PB2 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug4: hdmi-debug4 {
+			rockchip,pins =
+				/* hdmi_debug4 */
+				<1 RK_PB3 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug5: hdmi-debug5 {
+			rockchip,pins =
+				/* hdmi_debug5 */
+				<1 RK_PB4 7 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		hdmi_debug6: hdmi-debug6 {
+			rockchip,pins =
+				/* hdmi_debug6 */
+				<1 RK_PA0 7 &pcfg_pull_none>;
+		};
+	};
+
+	i2c0 {
+		/omit-if-no-ref/
+		i2c0m0_xfer: i2c0m0-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m0 */
+				<0 RK_PB3 2 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m0 */
+				<0 RK_PA6 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c0m2_xfer: i2c0m2-xfer {
+			rockchip,pins =
+				/* i2c0_scl_m2 */
+				<0 RK_PD1 3 &pcfg_pull_none_smt>,
+				/* i2c0_sda_m2 */
+				<0 RK_PD2 3 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c1 {
+		/omit-if-no-ref/
+		i2c1m0_xfer: i2c1m0-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m0 */
+				<0 RK_PB5 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m0 */
+				<0 RK_PB6 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m1_xfer: i2c1m1-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m1 */
+				<0 RK_PB0 2 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m1 */
+				<0 RK_PB1 2 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m2_xfer: i2c1m2-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m2 */
+				<0 RK_PD4 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m2 */
+				<0 RK_PD5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m3_xfer: i2c1m3-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m3 */
+				<2 RK_PD4 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m3 */
+				<2 RK_PD5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c1m4_xfer: i2c1m4-xfer {
+			rockchip,pins =
+				/* i2c1_scl_m4 */
+				<1 RK_PD2 9 &pcfg_pull_none_smt>,
+				/* i2c1_sda_m4 */
+				<1 RK_PD3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c2 {
+		/omit-if-no-ref/
+		i2c2m0_xfer: i2c2m0-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m0 */
+				<0 RK_PB7 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m0 */
+				<0 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m2_xfer: i2c2m2-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m2 */
+				<2 RK_PA3 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m2 */
+				<2 RK_PA2 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m3_xfer: i2c2m3-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m3 */
+				<1 RK_PC5 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m3 */
+				<1 RK_PC4 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c2m4_xfer: i2c2m4-xfer {
+			rockchip,pins =
+				/* i2c2_scl_m4 */
+				<1 RK_PA1 9 &pcfg_pull_none_smt>,
+				/* i2c2_sda_m4 */
+				<1 RK_PA0 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c3 {
+		/omit-if-no-ref/
+		i2c3m0_xfer: i2c3m0-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m0 */
+				<1 RK_PC1 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m0 */
+				<1 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m1_xfer: i2c3m1-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m1 */
+				<3 RK_PB7 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m1 */
+				<3 RK_PC0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m2_xfer: i2c3m2-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m2 */
+				<4 RK_PA4 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m2 */
+				<4 RK_PA5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c3m4_xfer: i2c3m4-xfer {
+			rockchip,pins =
+				/* i2c3_scl_m4 */
+				<4 RK_PD0 9 &pcfg_pull_none_smt>,
+				/* i2c3_sda_m4 */
+				<4 RK_PD1 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c4 {
+		/omit-if-no-ref/
+		i2c4m0_xfer: i2c4m0-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m0 */
+				<3 RK_PA6 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m0 */
+				<3 RK_PA5 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m2_xfer: i2c4m2-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m2 */
+				<0 RK_PC5 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m2 */
+				<0 RK_PC4 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m3_xfer: i2c4m3-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m3 */
+				<1 RK_PA3 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m3 */
+				<1 RK_PA2 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c4m4_xfer: i2c4m4-xfer {
+			rockchip,pins =
+				/* i2c4_scl_m4 */
+				<1 RK_PC7 9 &pcfg_pull_none_smt>,
+				/* i2c4_sda_m4 */
+				<1 RK_PC6 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c5 {
+		/omit-if-no-ref/
+		i2c5m0_xfer: i2c5m0-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m0 */
+				<3 RK_PC7 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m0 */
+				<3 RK_PD0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m1_xfer: i2c5m1-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m1 */
+				<4 RK_PB6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m1 */
+				<4 RK_PB7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m2_xfer: i2c5m2-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m2 */
+				<4 RK_PA6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m2 */
+				<4 RK_PA7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c5m3_xfer: i2c5m3-xfer {
+			rockchip,pins =
+				/* i2c5_scl_m3 */
+				<1 RK_PB6 9 &pcfg_pull_none_smt>,
+				/* i2c5_sda_m3 */
+				<1 RK_PB7 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c6 {
+		/omit-if-no-ref/
+		i2c6m0_xfer: i2c6m0-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m0 */
+				<0 RK_PD0 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m0 */
+				<0 RK_PC7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m1_xfer: i2c6m1-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m1 */
+				<1 RK_PC3 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m1 */
+				<1 RK_PC2 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m3_xfer: i2c6m3-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m3 */
+				<4 RK_PB1 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m3 */
+				<4 RK_PB0 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c6m4_xfer: i2c6m4-xfer {
+			rockchip,pins =
+				/* i2c6_scl_m4 */
+				<3 RK_PA1 9 &pcfg_pull_none_smt>,
+				/* i2c6_sda_m4 */
+				<3 RK_PA0 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c7 {
+		/omit-if-no-ref/
+		i2c7m0_xfer: i2c7m0-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m0 */
+				<1 RK_PD0 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m0 */
+				<1 RK_PD1 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c7m2_xfer: i2c7m2-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m2 */
+				<3 RK_PD2 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m2 */
+				<3 RK_PD3 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c7m3_xfer: i2c7m3-xfer {
+			rockchip,pins =
+				/* i2c7_scl_m3 */
+				<4 RK_PB2 9 &pcfg_pull_none_smt>,
+				/* i2c7_sda_m3 */
+				<4 RK_PB3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2c8 {
+		/omit-if-no-ref/
+		i2c8m0_xfer: i2c8m0-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m0 */
+				<4 RK_PD2 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m0 */
+				<4 RK_PD3 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c8m2_xfer: i2c8m2-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m2 */
+				<1 RK_PD6 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m2 */
+				<1 RK_PD7 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c8m3_xfer: i2c8m3-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m3 */
+				<4 RK_PC0 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m3 */
+				<4 RK_PC1 9 &pcfg_pull_none_smt>;
+		};
+
+		/omit-if-no-ref/
+		i2c8m4_xfer: i2c8m4-xfer {
+			rockchip,pins =
+				/* i2c8_scl_m4 */
+				<3 RK_PC2 9 &pcfg_pull_none_smt>,
+				/* i2c8_sda_m4 */
+				<3 RK_PC3 9 &pcfg_pull_none_smt>;
+		};
+	};
+
+	i2s0 {
+		/omit-if-no-ref/
+		i2s0_lrck: i2s0-lrck {
+			rockchip,pins =
+				/* i2s0_lrck */
+				<1 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_mclk: i2s0-mclk {
+			rockchip,pins =
+				/* i2s0_mclk */
+				<1 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sclk: i2s0-sclk {
+			rockchip,pins =
+				/* i2s0_sclk */
+				<1 RK_PC3 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi0: i2s0-sdi0 {
+			rockchip,pins =
+				/* i2s0_sdi0 */
+				<1 RK_PD4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi1: i2s0-sdi1 {
+			rockchip,pins =
+				/* i2s0_sdi1 */
+				<1 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi2: i2s0-sdi2 {
+			rockchip,pins =
+				/* i2s0_sdi2 */
+				<1 RK_PD2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdi3: i2s0-sdi3 {
+			rockchip,pins =
+				/* i2s0_sdi3 */
+				<1 RK_PD1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo0: i2s0-sdo0 {
+			rockchip,pins =
+				/* i2s0_sdo0 */
+				<1 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo1: i2s0-sdo1 {
+			rockchip,pins =
+				/* i2s0_sdo1 */
+				<1 RK_PD0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo2: i2s0-sdo2 {
+			rockchip,pins =
+				/* i2s0_sdo2 */
+				<1 RK_PD1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s0_sdo3: i2s0-sdo3 {
+			rockchip,pins =
+				/* i2s0_sdo3 */
+				<1 RK_PD2 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s1 {
+		/omit-if-no-ref/
+		i2s1m0_lrck: i2s1m0-lrck {
+			rockchip,pins =
+				/* i2s1m0_lrck */
+				<4 RK_PA2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_mclk: i2s1m0-mclk {
+			rockchip,pins =
+				/* i2s1m0_mclk */
+				<4 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sclk: i2s1m0-sclk {
+			rockchip,pins =
+				/* i2s1m0_sclk */
+				<4 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi0: i2s1m0-sdi0 {
+			rockchip,pins =
+				/* i2s1m0_sdi0 */
+				<4 RK_PA5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi1: i2s1m0-sdi1 {
+			rockchip,pins =
+				/* i2s1m0_sdi1 */
+				<4 RK_PA6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi2: i2s1m0-sdi2 {
+			rockchip,pins =
+				/* i2s1m0_sdi2 */
+				<4 RK_PA7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdi3: i2s1m0-sdi3 {
+			rockchip,pins =
+				/* i2s1m0_sdi3 */
+				<4 RK_PB0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo0: i2s1m0-sdo0 {
+			rockchip,pins =
+				/* i2s1m0_sdo0 */
+				<4 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo1: i2s1m0-sdo1 {
+			rockchip,pins =
+				/* i2s1m0_sdo1 */
+				<4 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo2: i2s1m0-sdo2 {
+			rockchip,pins =
+				/* i2s1m0_sdo2 */
+				<4 RK_PB3 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m0_sdo3: i2s1m0-sdo3 {
+			rockchip,pins =
+				/* i2s1m0_sdo3 */
+				<4 RK_PB4 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		i2s1m1_lrck: i2s1m1-lrck {
+			rockchip,pins =
+				/* i2s1m1_lrck */
+				<0 RK_PB7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_mclk: i2s1m1-mclk {
+			rockchip,pins =
+				/* i2s1m1_mclk */
+				<0 RK_PB5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sclk: i2s1m1-sclk {
+			rockchip,pins =
+				/* i2s1m1_sclk */
+				<0 RK_PB6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi0: i2s1m1-sdi0 {
+			rockchip,pins =
+				/* i2s1m1_sdi0 */
+				<0 RK_PC5 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi1: i2s1m1-sdi1 {
+			rockchip,pins =
+				/* i2s1m1_sdi1 */
+				<0 RK_PC6 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi2: i2s1m1-sdi2 {
+			rockchip,pins =
+				/* i2s1m1_sdi2 */
+				<0 RK_PC7 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdi3: i2s1m1-sdi3 {
+			rockchip,pins =
+				/* i2s1m1_sdi3 */
+				<0 RK_PD0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo0: i2s1m1-sdo0 {
+			rockchip,pins =
+				/* i2s1m1_sdo0 */
+				<0 RK_PD1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo1: i2s1m1-sdo1 {
+			rockchip,pins =
+				/* i2s1m1_sdo1 */
+				<0 RK_PD2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo2: i2s1m1-sdo2 {
+			rockchip,pins =
+				/* i2s1m1_sdo2 */
+				<0 RK_PD4 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s1m1_sdo3: i2s1m1-sdo3 {
+			rockchip,pins =
+				/* i2s1m1_sdo3 */
+				<0 RK_PD5 1 &pcfg_pull_none>;
+		};
+	};
+
+	i2s2 {
+		/omit-if-no-ref/
+		i2s2m1_lrck: i2s2m1-lrck {
+			rockchip,pins =
+				/* i2s2m1_lrck */
+				<3 RK_PB6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_mclk: i2s2m1-mclk {
+			rockchip,pins =
+				/* i2s2m1_mclk */
+				<3 RK_PB4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sclk: i2s2m1-sclk {
+			rockchip,pins =
+				/* i2s2m1_sclk */
+				<3 RK_PB5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdi: i2s2m1-sdi {
+			rockchip,pins =
+				/* i2s2m1_sdi */
+				<3 RK_PB2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s2m1_sdo: i2s2m1-sdo {
+			rockchip,pins =
+				/* i2s2m1_sdo */
+				<3 RK_PB3 3 &pcfg_pull_none>;
+		};
+	};
+
+	i2s3 {
+		/omit-if-no-ref/
+		i2s3_lrck: i2s3-lrck {
+			rockchip,pins =
+				/* i2s3_lrck */
+				<3 RK_PA2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_mclk: i2s3-mclk {
+			rockchip,pins =
+				/* i2s3_mclk */
+				<3 RK_PA0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_sclk: i2s3-sclk {
+			rockchip,pins =
+				/* i2s3_sclk */
+				<3 RK_PA1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_sdi: i2s3-sdi {
+			rockchip,pins =
+				/* i2s3_sdi */
+				<3 RK_PA4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		i2s3_sdo: i2s3-sdo {
+			rockchip,pins =
+				/* i2s3_sdo */
+				<3 RK_PA3 3 &pcfg_pull_none>;
+		};
+	};
+
+	jtag {
+		/omit-if-no-ref/
+		jtagm0_pins: jtagm0-pins {
+			rockchip,pins =
+				/* jtag_tck_m0 */
+				<4 RK_PD2 5 &pcfg_pull_none>,
+				/* jtag_tms_m0 */
+				<4 RK_PD3 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm1_pins: jtagm1-pins {
+			rockchip,pins =
+				/* jtag_tck_m1 */
+				<4 RK_PD0 5 &pcfg_pull_none>,
+				/* jtag_tms_m1 */
+				<4 RK_PD1 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		jtagm2_pins: jtagm2-pins {
+			rockchip,pins =
+				/* jtag_tck_m2 */
+				<0 RK_PB5 2 &pcfg_pull_none>,
+				/* jtag_tms_m2 */
+				<0 RK_PB6 2 &pcfg_pull_none>;
+		};
+	};
+
+	litcpu {
+		/omit-if-no-ref/
+		litcpu_pins: litcpu-pins {
+			rockchip,pins =
+				/* litcpu_avs */
+				<0 RK_PD3 1 &pcfg_pull_none>;
+		};
+	};
+
+	mcu {
+		/omit-if-no-ref/
+		mcum0_pins: mcum0-pins {
+			rockchip,pins =
+				/* mcu_jtag_tck_m0 */
+				<4 RK_PD4 5 &pcfg_pull_none>,
+				/* mcu_jtag_tms_m0 */
+				<4 RK_PD5 5 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mcum1_pins: mcum1-pins {
+			rockchip,pins =
+				/* mcu_jtag_tck_m1 */
+				<3 RK_PD4 6 &pcfg_pull_none>,
+				/* mcu_jtag_tms_m1 */
+				<3 RK_PD5 6 &pcfg_pull_none>;
+		};
+	};
+
+	mipi {
+		/omit-if-no-ref/
+		mipim0_camera0_clk: mipim0-camera0-clk {
+			rockchip,pins =
+				/* mipim0_camera0_clk */
+				<4 RK_PB1 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera1_clk: mipim0-camera1-clk {
+			rockchip,pins =
+				/* mipim0_camera1_clk */
+				<1 RK_PB6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera2_clk: mipim0-camera2-clk {
+			rockchip,pins =
+				/* mipim0_camera2_clk */
+				<1 RK_PB7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera3_clk: mipim0-camera3-clk {
+			rockchip,pins =
+				/* mipim0_camera3_clk */
+				<1 RK_PD6 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim0_camera4_clk: mipim0-camera4-clk {
+			rockchip,pins =
+				/* mipim0_camera4_clk */
+				<1 RK_PD7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera0_clk: mipim1-camera0-clk {
+			rockchip,pins =
+				/* mipim1_camera0_clk */
+				<3 RK_PA5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera1_clk: mipim1-camera1-clk {
+			rockchip,pins =
+				/* mipim1_camera1_clk */
+				<3 RK_PA6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera2_clk: mipim1-camera2-clk {
+			rockchip,pins =
+				/* mipim1_camera2_clk */
+				<3 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera3_clk: mipim1-camera3-clk {
+			rockchip,pins =
+				/* mipim1_camera3_clk */
+				<3 RK_PB0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipim1_camera4_clk: mipim1-camera4-clk {
+			rockchip,pins =
+				/* mipim1_camera4_clk */
+				<3 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipi_te0: mipi-te0 {
+			rockchip,pins =
+				/* mipi_te0 */
+				<3 RK_PC2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		mipi_te1: mipi-te1 {
+			rockchip,pins =
+				/* mipi_te1 */
+				<3 RK_PC3 2 &pcfg_pull_none>;
+		};
+	};
+
+	npu {
+		/omit-if-no-ref/
+		npu_pins: npu-pins {
+			rockchip,pins =
+				/* npu_avs */
+				<0 RK_PC6 2 &pcfg_pull_none>;
+		};
+	};
+
+	pcie20x1 {
+		/omit-if-no-ref/
+		pcie20x1m0_pins: pcie20x1m0-pins {
+			rockchip,pins =
+				/* pcie20x1_2_clkreqn_m0 */
+				<3 RK_PC7 4 &pcfg_pull_none>,
+				/* pcie20x1_2_perstn_m0 */
+				<3 RK_PD1 4 &pcfg_pull_none>,
+				/* pcie20x1_2_waken_m0 */
+				<3 RK_PD0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1m1_pins: pcie20x1m1-pins {
+			rockchip,pins =
+				/* pcie20x1_2_clkreqn_m1 */
+				<4 RK_PB7 4 &pcfg_pull_none>,
+				/* pcie20x1_2_perstn_m1 */
+				<4 RK_PC1 4 &pcfg_pull_none>,
+				/* pcie20x1_2_waken_m1 */
+				<4 RK_PC0 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie20x1_2_button_rstn: pcie20x1-2-button-rstn {
+			rockchip,pins =
+				/* pcie20x1_2_button_rstn */
+				<4 RK_PB3 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30phy {
+		/omit-if-no-ref/
+		pcie30phy_pins: pcie30phy-pins {
+			rockchip,pins =
+				/* pcie30phy_dtb0 */
+				<1 RK_PC4 4 &pcfg_pull_none>,
+				/* pcie30phy_dtb1 */
+				<1 RK_PD1 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x1 {
+		/omit-if-no-ref/
+		pcie30x1m0_pins: pcie30x1m0-pins {
+			rockchip,pins =
+				/* pcie30x1_0_clkreqn_m0 */
+				<0 RK_PC0 12 &pcfg_pull_none>,
+				/* pcie30x1_0_perstn_m0 */
+				<0 RK_PC5 12 &pcfg_pull_none>,
+				/* pcie30x1_0_waken_m0 */
+				<0 RK_PC4 12 &pcfg_pull_none>,
+				/* pcie30x1_1_clkreqn_m0 */
+				<0 RK_PB5 12 &pcfg_pull_none>,
+				/* pcie30x1_1_perstn_m0 */
+				<0 RK_PB7 12 &pcfg_pull_none>,
+				/* pcie30x1_1_waken_m0 */
+				<0 RK_PB6 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m1_pins: pcie30x1m1-pins {
+			rockchip,pins =
+				/* pcie30x1_0_clkreqn_m1 */
+				<4 RK_PA3 4 &pcfg_pull_none>,
+				/* pcie30x1_0_perstn_m1 */
+				<4 RK_PA5 4 &pcfg_pull_none>,
+				/* pcie30x1_0_waken_m1 */
+				<4 RK_PA4 4 &pcfg_pull_none>,
+				/* pcie30x1_1_clkreqn_m1 */
+				<4 RK_PA0 4 &pcfg_pull_none>,
+				/* pcie30x1_1_perstn_m1 */
+				<4 RK_PA2 4 &pcfg_pull_none>,
+				/* pcie30x1_1_waken_m1 */
+				<4 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1m2_pins: pcie30x1m2-pins {
+			rockchip,pins =
+				/* pcie30x1_0_clkreqn_m2 */
+				<1 RK_PB5 4 &pcfg_pull_none>,
+				/* pcie30x1_0_perstn_m2 */
+				<1 RK_PB4 4 &pcfg_pull_none>,
+				/* pcie30x1_0_waken_m2 */
+				<1 RK_PB3 4 &pcfg_pull_none>,
+				/* pcie30x1_1_clkreqn_m2 */
+				<1 RK_PA0 4 &pcfg_pull_none>,
+				/* pcie30x1_1_perstn_m2 */
+				<1 RK_PA7 4 &pcfg_pull_none>,
+				/* pcie30x1_1_waken_m2 */
+				<1 RK_PA1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1_0_button_rstn: pcie30x1-0-button-rstn {
+			rockchip,pins =
+				/* pcie30x1_0_button_rstn */
+				<4 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x1_1_button_rstn: pcie30x1-1-button-rstn {
+			rockchip,pins =
+				/* pcie30x1_1_button_rstn */
+				<4 RK_PB2 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x2 {
+		/omit-if-no-ref/
+		pcie30x2m0_pins: pcie30x2m0-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m0 */
+				<0 RK_PD1 12 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m0 */
+				<0 RK_PD4 12 &pcfg_pull_none>,
+				/* pcie30x2_waken_m0 */
+				<0 RK_PD2 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m1_pins: pcie30x2m1-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m1 */
+				<4 RK_PA6 4 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m1 */
+				<4 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie30x2_waken_m1 */
+				<4 RK_PA7 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m2_pins: pcie30x2m2-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m2 */
+				<3 RK_PD2 4 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m2 */
+				<3 RK_PD4 4 &pcfg_pull_none>,
+				/* pcie30x2_waken_m2 */
+				<3 RK_PD3 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2m3_pins: pcie30x2m3-pins {
+			rockchip,pins =
+				/* pcie30x2_clkreqn_m3 */
+				<1 RK_PD7 4 &pcfg_pull_none>,
+				/* pcie30x2_perstn_m3 */
+				<1 RK_PB7 4 &pcfg_pull_none>,
+				/* pcie30x2_waken_m3 */
+				<1 RK_PB6 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x2_button_rstn: pcie30x2-button-rstn {
+			rockchip,pins =
+				/* pcie30x2_button_rstn */
+				<3 RK_PC1 4 &pcfg_pull_none>;
+		};
+	};
+
+	pcie30x4 {
+		/omit-if-no-ref/
+		pcie30x4m0_pins: pcie30x4m0-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m0 */
+				<0 RK_PC6 12 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m0 */
+				<0 RK_PD0 12 &pcfg_pull_none>,
+				/* pcie30x4_waken_m0 */
+				<0 RK_PC7 12 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m1_pins: pcie30x4m1-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m1 */
+				<4 RK_PB4 4 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m1 */
+				<4 RK_PB6 4 &pcfg_pull_none>,
+				/* pcie30x4_waken_m1 */
+				<4 RK_PB5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m2_pins: pcie30x4m2-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m2 */
+				<3 RK_PC4 4 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m2 */
+				<3 RK_PC6 4 &pcfg_pull_none>,
+				/* pcie30x4_waken_m2 */
+				<3 RK_PC5 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4m3_pins: pcie30x4m3-pins {
+			rockchip,pins =
+				/* pcie30x4_clkreqn_m3 */
+				<1 RK_PB0 4 &pcfg_pull_none>,
+				/* pcie30x4_perstn_m3 */
+				<1 RK_PB2 4 &pcfg_pull_none>,
+				/* pcie30x4_waken_m3 */
+				<1 RK_PB1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pcie30x4_button_rstn: pcie30x4-button-rstn {
+			rockchip,pins =
+				/* pcie30x4_button_rstn */
+				<3 RK_PD5 4 &pcfg_pull_none>;
+		};
+	};
+
+	pdm0 {
+		/omit-if-no-ref/
+		pdm0m0_clk: pdm0m0-clk {
+			rockchip,pins =
+				/* pdm0_clk0_m0 */
+				<1 RK_PC6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_clk1: pdm0m0-clk1 {
+			rockchip,pins =
+				/* pdm0m0_clk1 */
+				<1 RK_PC4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi0: pdm0m0-sdi0 {
+			rockchip,pins =
+				/* pdm0m0_sdi0 */
+				<1 RK_PD5 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi1: pdm0m0-sdi1 {
+			rockchip,pins =
+				/* pdm0m0_sdi1 */
+				<1 RK_PD1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi2: pdm0m0-sdi2 {
+			rockchip,pins =
+				/* pdm0m0_sdi2 */
+				<1 RK_PD2 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m0_sdi3: pdm0m0-sdi3 {
+			rockchip,pins =
+				/* pdm0m0_sdi3 */
+				<1 RK_PD3 3 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pdm0m1_clk: pdm0m1-clk {
+			rockchip,pins =
+				/* pdm0_clk0_m1 */
+				<0 RK_PC0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_clk1: pdm0m1-clk1 {
+			rockchip,pins =
+				/* pdm0m1_clk1 */
+				<0 RK_PC4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi0: pdm0m1-sdi0 {
+			rockchip,pins =
+				/* pdm0m1_sdi0 */
+				<0 RK_PC7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi1: pdm0m1-sdi1 {
+			rockchip,pins =
+				/* pdm0m1_sdi1 */
+				<0 RK_PD0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi2: pdm0m1-sdi2 {
+			rockchip,pins =
+				/* pdm0m1_sdi2 */
+				<0 RK_PD4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm0m1_sdi3: pdm0m1-sdi3 {
+			rockchip,pins =
+				/* pdm0m1_sdi3 */
+				<0 RK_PD6 2 &pcfg_pull_none>;
+		};
+	};
+
+	pdm1 {
+		/omit-if-no-ref/
+		pdm1m0_clk: pdm1m0-clk {
+			rockchip,pins =
+				/* pdm1_clk0_m0 */
+				<4 RK_PD5 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_clk1: pdm1m0-clk1 {
+			rockchip,pins =
+				/* pdm1m0_clk1 */
+				<4 RK_PD4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi0: pdm1m0-sdi0 {
+			rockchip,pins =
+				/* pdm1m0_sdi0 */
+				<4 RK_PD3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi1: pdm1m0-sdi1 {
+			rockchip,pins =
+				/* pdm1m0_sdi1 */
+				<4 RK_PD2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi2: pdm1m0-sdi2 {
+			rockchip,pins =
+				/* pdm1m0_sdi2 */
+				<4 RK_PD1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m0_sdi3: pdm1m0-sdi3 {
+			rockchip,pins =
+				/* pdm1m0_sdi3 */
+				<4 RK_PD0 2 &pcfg_pull_none>;
+		};
+		/omit-if-no-ref/
+		pdm1m1_clk: pdm1m1-clk {
+			rockchip,pins =
+				/* pdm1_clk0_m1 */
+				<1 RK_PB4 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_clk1: pdm1m1-clk1 {
+			rockchip,pins =
+				/* pdm1m1_clk1 */
+				<1 RK_PB3 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi0: pdm1m1-sdi0 {
+			rockchip,pins =
+				/* pdm1m1_sdi0 */
+				<1 RK_PA7 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi1: pdm1m1-sdi1 {
+			rockchip,pins =
+				/* pdm1m1_sdi1 */
+				<1 RK_PB0 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi2: pdm1m1-sdi2 {
+			rockchip,pins =
+				/* pdm1m1_sdi2 */
+				<1 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pdm1m1_sdi3: pdm1m1-sdi3 {
+			rockchip,pins =
+				/* pdm1m1_sdi3 */
+				<1 RK_PB2 2 &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		/omit-if-no-ref/
+		pmic_pins: pmic-pins {
+			rockchip,pins =
+				/* pmic_int_l */
+				<0 RK_PA7 0 &pcfg_pull_up>,
+				/* pmic_sleep1 */
+				<0 RK_PA2 1 &pcfg_pull_none>,
+				/* pmic_sleep2 */
+				<0 RK_PA3 1 &pcfg_pull_none>,
+				/* pmic_sleep3 */
+				<0 RK_PC1 1 &pcfg_pull_none>,
+				/* pmic_sleep4 */
+				<0 RK_PC2 1 &pcfg_pull_none>,
+				/* pmic_sleep5 */
+				<0 RK_PC3 1 &pcfg_pull_none>,
+				/* pmic_sleep6 */
+				<0 RK_PD6 1 &pcfg_pull_none>;
+		};
+	};
+
+	pmu {
+		/omit-if-no-ref/
+		pmu_pins: pmu-pins {
+			rockchip,pins =
+				/* pmu_debug */
+				<0 RK_PA5 3 &pcfg_pull_none>;
+		};
+	};
+
+	pwm0 {
+		/omit-if-no-ref/
+		pwm0m0_pins: pwm0m0-pins {
+			rockchip,pins =
+				/* pwm0_m0 */
+				<0 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m1_pins: pwm0m1-pins {
+			rockchip,pins =
+				/* pwm0_m1 */
+				<1 RK_PD2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm0m2_pins: pwm0m2-pins {
+			rockchip,pins =
+				/* pwm0_m2 */
+				<1 RK_PA2 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm1 {
+		/omit-if-no-ref/
+		pwm1m0_pins: pwm1m0-pins {
+			rockchip,pins =
+				/* pwm1_m0 */
+				<0 RK_PC0 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m1_pins: pwm1m1-pins {
+			rockchip,pins =
+				/* pwm1_m1 */
+				<1 RK_PD3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm1m2_pins: pwm1m2-pins {
+			rockchip,pins =
+				/* pwm1_m2 */
+				<1 RK_PA3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm2 {
+		/omit-if-no-ref/
+		pwm2m0_pins: pwm2m0-pins {
+			rockchip,pins =
+				/* pwm2_m0 */
+				<0 RK_PC4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm2m1_pins: pwm2m1-pins {
+			rockchip,pins =
+				/* pwm2_m1 */
+				<3 RK_PB1 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm3 {
+		/omit-if-no-ref/
+		pwm3m0_pins: pwm3m0-pins {
+			rockchip,pins =
+				/* pwm3_ir_m0 */
+				<0 RK_PD4 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m1_pins: pwm3m1-pins {
+			rockchip,pins =
+				/* pwm3_ir_m1 */
+				<3 RK_PB2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m2_pins: pwm3m2-pins {
+			rockchip,pins =
+				/* pwm3_ir_m2 */
+				<1 RK_PC2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm3m3_pins: pwm3m3-pins {
+			rockchip,pins =
+				/* pwm3_ir_m3 */
+				<1 RK_PA7 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm4 {
+		/omit-if-no-ref/
+		pwm4m0_pins: pwm4m0-pins {
+			rockchip,pins =
+				/* pwm4_m0 */
+				<0 RK_PC5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm5 {
+		/omit-if-no-ref/
+		pwm5m0_pins: pwm5m0-pins {
+			rockchip,pins =
+				/* pwm5_m0 */
+				<0 RK_PB1 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm5m1_pins: pwm5m1-pins {
+			rockchip,pins =
+				/* pwm5_m1 */
+				<0 RK_PC6 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm6 {
+		/omit-if-no-ref/
+		pwm6m0_pins: pwm6m0-pins {
+			rockchip,pins =
+				/* pwm6_m0 */
+				<0 RK_PC7 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm6m1_pins: pwm6m1-pins {
+			rockchip,pins =
+				/* pwm6_m1 */
+				<4 RK_PC1 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm7 {
+		/omit-if-no-ref/
+		pwm7m0_pins: pwm7m0-pins {
+			rockchip,pins =
+				/* pwm7_ir_m0 */
+				<0 RK_PD0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m1_pins: pwm7m1-pins {
+			rockchip,pins =
+				/* pwm7_ir_m1 */
+				<4 RK_PD4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm7m2_pins: pwm7m2-pins {
+			rockchip,pins =
+				/* pwm7_ir_m2 */
+				<1 RK_PC3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm8 {
+		/omit-if-no-ref/
+		pwm8m0_pins: pwm8m0-pins {
+			rockchip,pins =
+				/* pwm8_m0 */
+				<3 RK_PA7 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m1_pins: pwm8m1-pins {
+			rockchip,pins =
+				/* pwm8_m1 */
+				<4 RK_PD0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm8m2_pins: pwm8m2-pins {
+			rockchip,pins =
+				/* pwm8_m2 */
+				<3 RK_PD0 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm9 {
+		/omit-if-no-ref/
+		pwm9m0_pins: pwm9m0-pins {
+			rockchip,pins =
+				/* pwm9_m0 */
+				<3 RK_PB0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m1_pins: pwm9m1-pins {
+			rockchip,pins =
+				/* pwm9_m1 */
+				<4 RK_PD1 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm9m2_pins: pwm9m2-pins {
+			rockchip,pins =
+				/* pwm9_m2 */
+				<3 RK_PD1 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm10 {
+		/omit-if-no-ref/
+		pwm10m0_pins: pwm10m0-pins {
+			rockchip,pins =
+				/* pwm10_m0 */
+				<3 RK_PA0 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m1_pins: pwm10m1-pins {
+			rockchip,pins =
+				/* pwm10_m1 */
+				<4 RK_PD3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm10m2_pins: pwm10m2-pins {
+			rockchip,pins =
+				/* pwm10_m2 */
+				<3 RK_PD3 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm11 {
+		/omit-if-no-ref/
+		pwm11m0_pins: pwm11m0-pins {
+			rockchip,pins =
+				/* pwm11_ir_m0 */
+				<3 RK_PA1 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m1_pins: pwm11m1-pins {
+			rockchip,pins =
+				/* pwm11_ir_m1 */
+				<4 RK_PB4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m2_pins: pwm11m2-pins {
+			rockchip,pins =
+				/* pwm11_ir_m2 */
+				<1 RK_PC4 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm11m3_pins: pwm11m3-pins {
+			rockchip,pins =
+				/* pwm11_ir_m3 */
+				<3 RK_PD5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm12 {
+		/omit-if-no-ref/
+		pwm12m0_pins: pwm12m0-pins {
+			rockchip,pins =
+				/* pwm12_m0 */
+				<3 RK_PB5 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm12m1_pins: pwm12m1-pins {
+			rockchip,pins =
+				/* pwm12_m1 */
+				<4 RK_PB5 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm13 {
+		/omit-if-no-ref/
+		pwm13m0_pins: pwm13m0-pins {
+			rockchip,pins =
+				/* pwm13_m0 */
+				<3 RK_PB6 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m1_pins: pwm13m1-pins {
+			rockchip,pins =
+				/* pwm13_m1 */
+				<4 RK_PB6 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm13m2_pins: pwm13m2-pins {
+			rockchip,pins =
+				/* pwm13_m2 */
+				<1 RK_PB7 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm14 {
+		/omit-if-no-ref/
+		pwm14m0_pins: pwm14m0-pins {
+			rockchip,pins =
+				/* pwm14_m0 */
+				<3 RK_PC2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m1_pins: pwm14m1-pins {
+			rockchip,pins =
+				/* pwm14_m1 */
+				<4 RK_PB2 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm14m2_pins: pwm14m2-pins {
+			rockchip,pins =
+				/* pwm14_m2 */
+				<1 RK_PD6 11 &pcfg_pull_none>;
+		};
+	};
+
+	pwm15 {
+		/omit-if-no-ref/
+		pwm15m0_pins: pwm15m0-pins {
+			rockchip,pins =
+				/* pwm15_ir_m0 */
+				<3 RK_PC3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m1_pins: pwm15m1-pins {
+			rockchip,pins =
+				/* pwm15_ir_m1 */
+				<4 RK_PB3 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m2_pins: pwm15m2-pins {
+			rockchip,pins =
+				/* pwm15_ir_m2 */
+				<1 RK_PC6 11 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		pwm15m3_pins: pwm15m3-pins {
+			rockchip,pins =
+				/* pwm15_ir_m3 */
+				<1 RK_PD7 11 &pcfg_pull_none>;
+		};
+	};
+
+	refclk {
+		/omit-if-no-ref/
+		refclk_pins: refclk-pins {
+			rockchip,pins =
+				/* refclk_out */
+				<0 RK_PA0 1 &pcfg_pull_none>;
+		};
+	};
+
+	sata {
+		/omit-if-no-ref/
+		sata_pins: sata-pins {
+			rockchip,pins =
+				/* sata_cp_pod */
+				<0 RK_PC6 13 &pcfg_pull_none>,
+				/* sata_cpdet */
+				<0 RK_PD4 13 &pcfg_pull_none>,
+				/* sata_mp_switch */
+				<0 RK_PD5 13 &pcfg_pull_none>;
+		};
+	};
+
+	sata0 {
+		/omit-if-no-ref/
+		sata0m0_pins: sata0m0-pins {
+			rockchip,pins =
+				/* sata0_act_led_m0 */
+				<4 RK_PB6 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sata0m1_pins: sata0m1-pins {
+			rockchip,pins =
+				/* sata0_act_led_m1 */
+				<1 RK_PB3 6 &pcfg_pull_none>;
+		};
+	};
+
+	sata1 {
+		/omit-if-no-ref/
+		sata1m0_pins: sata1m0-pins {
+			rockchip,pins =
+				/* sata1_act_led_m0 */
+				<4 RK_PB5 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sata1m1_pins: sata1m1-pins {
+			rockchip,pins =
+				/* sata1_act_led_m1 */
+				<1 RK_PA1 6 &pcfg_pull_none>;
+		};
+	};
+
+	sata2 {
+		/omit-if-no-ref/
+		sata2m0_pins: sata2m0-pins {
+			rockchip,pins =
+				/* sata2_act_led_m0 */
+				<4 RK_PB1 6 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		sata2m1_pins: sata2m1-pins {
+			rockchip,pins =
+				/* sata2_act_led_m1 */
+				<1 RK_PB7 6 &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		/omit-if-no-ref/
+		sdiom1_pins: sdiom1-pins {
+			rockchip,pins =
+				/* sdio_clk_m1 */
+				<3 RK_PA5 2 &pcfg_pull_none>,
+				/* sdio_cmd_m1 */
+				<3 RK_PA4 2 &pcfg_pull_none>,
+				/* sdio_d0_m1 */
+				<3 RK_PA0 2 &pcfg_pull_none>,
+				/* sdio_d1_m1 */
+				<3 RK_PA1 2 &pcfg_pull_none>,
+				/* sdio_d2_m1 */
+				<3 RK_PA2 2 &pcfg_pull_none>,
+				/* sdio_d3_m1 */
+				<3 RK_PA3 2 &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/omit-if-no-ref/
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				/* sdmmc_d0 */
+				<4 RK_PD0 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d1 */
+				<4 RK_PD1 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d2 */
+				<4 RK_PD2 1 &pcfg_pull_up_drv_level_2>,
+				/* sdmmc_d3 */
+				<4 RK_PD3 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				/* sdmmc_clk */
+				<4 RK_PD5 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				/* sdmmc_cmd */
+				<4 RK_PD4 1 &pcfg_pull_up_drv_level_2>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_det: sdmmc-det {
+			rockchip,pins =
+				/* sdmmc_det */
+				<0 RK_PA4 1 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		sdmmc_pwren: sdmmc-pwren {
+			rockchip,pins =
+				/* sdmmc_pwren */
+				<0 RK_PA5 2 &pcfg_pull_none>;
+		};
+	};
+
+	spdif0 {
+		/omit-if-no-ref/
+		spdif0m0_tx: spdif0m0-tx {
+			rockchip,pins =
+				/* spdif0m0_tx */
+				<1 RK_PB6 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdif0m1_tx: spdif0m1-tx {
+			rockchip,pins =
+				/* spdif0m1_tx */
+				<4 RK_PB4 6 &pcfg_pull_none>;
+		};
+	};
+
+	spdif1 {
+		/omit-if-no-ref/
+		spdif1m0_tx: spdif1m0-tx {
+			rockchip,pins =
+				/* spdif1m0_tx */
+				<1 RK_PB7 3 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdif1m1_tx: spdif1m1-tx {
+			rockchip,pins =
+				/* spdif1m1_tx */
+				<4 RK_PB1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		spdif1m2_tx: spdif1m2-tx {
+			rockchip,pins =
+				/* spdif1m2_tx */
+				<4 RK_PC1 3 &pcfg_pull_none>;
+		};
+	};
+
+	spi0 {
+		/omit-if-no-ref/
+		spi0m0_pins: spi0m0-pins {
+			rockchip,pins =
+				/* spi0_clk_m0 */
+				<0 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m0 */
+				<0 RK_PC7 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m0 */
+				<0 RK_PC0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs0: spi0m0-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m0 */
+				<0 RK_PD1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m0_cs1: spi0m0-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m0 */
+				<0 RK_PB7 8 &pcfg_pull_up_drv_level_1>;
+		};
+		/omit-if-no-ref/
+		spi0m1_pins: spi0m1-pins {
+			rockchip,pins =
+				/* spi0_clk_m1 */
+				<4 RK_PA2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m1 */
+				<4 RK_PA0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m1 */
+				<4 RK_PA1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs0: spi0m1-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m1 */
+				<4 RK_PB2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m1_cs1: spi0m1-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m1 */
+				<4 RK_PB1 8 &pcfg_pull_up_drv_level_1>;
+		};
+		/omit-if-no-ref/
+		spi0m2_pins: spi0m2-pins {
+			rockchip,pins =
+				/* spi0_clk_m2 */
+				<1 RK_PB3 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m2 */
+				<1 RK_PB1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m2 */
+				<1 RK_PB2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m2_cs0: spi0m2-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m2 */
+				<1 RK_PB4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m2_cs1: spi0m2-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m2 */
+				<1 RK_PB5 8 &pcfg_pull_up_drv_level_1>;
+		};
+		/omit-if-no-ref/
+		spi0m3_pins: spi0m3-pins {
+			rockchip,pins =
+				/* spi0_clk_m3 */
+				<3 RK_PD3 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_miso_m3 */
+				<3 RK_PD1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi0_mosi_m3 */
+				<3 RK_PD2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m3_cs0: spi0m3-cs0 {
+			rockchip,pins =
+				/* spi0_cs0_m3 */
+				<3 RK_PD4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi0m3_cs1: spi0m3-cs1 {
+			rockchip,pins =
+				/* spi0_cs1_m3 */
+				<3 RK_PD5 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi1 {
+		/omit-if-no-ref/
+		spi1m1_pins: spi1m1-pins {
+			rockchip,pins =
+				/* spi1_clk_m1 */
+				<3 RK_PC1 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_miso_m1 */
+				<3 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosi_m1 */
+				<3 RK_PB7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs0: spi1m1-cs0 {
+			rockchip,pins =
+				/* spi1_cs0_m1 */
+				<3 RK_PC2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m1_cs1: spi1m1-cs1 {
+			rockchip,pins =
+				/* spi1_cs1_m1 */
+				<3 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m2_pins: spi1m2-pins {
+			rockchip,pins =
+				/* spi1_clk_m2 */
+				<1 RK_PD2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_miso_m2 */
+				<1 RK_PD0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi1_mosi_m2 */
+				<1 RK_PD1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m2_cs0: spi1m2-cs0 {
+			rockchip,pins =
+				/* spi1_cs0_m2 */
+				<1 RK_PD3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi1m2_cs1: spi1m2-cs1 {
+			rockchip,pins =
+				/* spi1_cs1_m2 */
+				<1 RK_PD5 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi2 {
+		/omit-if-no-ref/
+		spi2m0_pins: spi2m0-pins {
+			rockchip,pins =
+				/* spi2_clk_m0 */
+				<1 RK_PA6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_miso_m0 */
+				<1 RK_PA4 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosi_m0 */
+				<1 RK_PA5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs0: spi2m0-cs0 {
+			rockchip,pins =
+				/* spi2_cs0_m0 */
+				<1 RK_PA7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m0_cs1: spi2m0-cs1 {
+			rockchip,pins =
+				/* spi2_cs1_m0 */
+				<1 RK_PB0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_pins: spi2m1-pins {
+			rockchip,pins =
+				/* spi2_clk_m1 */
+				<4 RK_PA6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_miso_m1 */
+				<4 RK_PA4 8 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosi_m1 */
+				<4 RK_PA5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs0: spi2m1-cs0 {
+			rockchip,pins =
+				/* spi2_cs0_m1 */
+				<4 RK_PA7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m1_cs1: spi2m1-cs1 {
+			rockchip,pins =
+				/* spi2_cs1_m1 */
+				<4 RK_PB0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m2_pins: spi2m2-pins {
+			rockchip,pins =
+				/* spi2_clk_m2 */
+				<0 RK_PA5 1 &pcfg_pull_up_drv_level_1>,
+				/* spi2_miso_m2 */
+				<0 RK_PB3 1 &pcfg_pull_up_drv_level_1>,
+				/* spi2_mosi_m2 */
+				<0 RK_PA6 1 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m2_cs0: spi2m2-cs0 {
+			rockchip,pins =
+				/* spi2_cs0_m2 */
+				<0 RK_PB1 1 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi2m2_cs1: spi2m2-cs1 {
+			rockchip,pins =
+				/* spi2_cs1_m2 */
+				<0 RK_PB0 1 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi3 {
+		/omit-if-no-ref/
+		spi3m1_pins: spi3m1-pins {
+			rockchip,pins =
+				/* spi3_clk_m1 */
+				<4 RK_PB7 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m1 */
+				<4 RK_PB5 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m1 */
+				<4 RK_PB6 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs0: spi3m1-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m1 */
+				<4 RK_PC0 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m1_cs1: spi3m1-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m1 */
+				<4 RK_PC1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m2_pins: spi3m2-pins {
+			rockchip,pins =
+				/* spi3_clk_m2 */
+				<0 RK_PD3 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m2 */
+				<0 RK_PD0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m2 */
+				<0 RK_PD2 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m2_cs0: spi3m2-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m2 */
+				<0 RK_PD4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m2_cs1: spi3m2-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m2 */
+				<0 RK_PD5 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m3_pins: spi3m3-pins {
+			rockchip,pins =
+				/* spi3_clk_m3 */
+				<3 RK_PD0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_miso_m3 */
+				<3 RK_PC6 8 &pcfg_pull_up_drv_level_1>,
+				/* spi3_mosi_m3 */
+				<3 RK_PC7 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m3_cs0: spi3m3-cs0 {
+			rockchip,pins =
+				/* spi3_cs0_m3 */
+				<3 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi3m3_cs1: spi3m3-cs1 {
+			rockchip,pins =
+				/* spi3_cs1_m3 */
+				<3 RK_PC5 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	spi4 {
+		/omit-if-no-ref/
+		spi4m0_pins: spi4m0-pins {
+			rockchip,pins =
+				/* spi4_clk_m0 */
+				<1 RK_PC2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_miso_m0 */
+				<1 RK_PC0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_mosi_m0 */
+				<1 RK_PC1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m0_cs0: spi4m0-cs0 {
+			rockchip,pins =
+				/* spi4_cs0_m0 */
+				<1 RK_PC3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m0_cs1: spi4m0-cs1 {
+			rockchip,pins =
+				/* spi4_cs1_m0 */
+				<1 RK_PC4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m1_pins: spi4m1-pins {
+			rockchip,pins =
+				/* spi4_clk_m1 */
+				<3 RK_PA2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_miso_m1 */
+				<3 RK_PA0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_mosi_m1 */
+				<3 RK_PA1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m1_cs0: spi4m1-cs0 {
+			rockchip,pins =
+				/* spi4_cs0_m1 */
+				<3 RK_PA3 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m1_cs1: spi4m1-cs1 {
+			rockchip,pins =
+				/* spi4_cs1_m1 */
+				<3 RK_PA4 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m2_pins: spi4m2-pins {
+			rockchip,pins =
+				/* spi4_clk_m2 */
+				<1 RK_PA2 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_miso_m2 */
+				<1 RK_PA0 8 &pcfg_pull_up_drv_level_1>,
+				/* spi4_mosi_m2 */
+				<1 RK_PA1 8 &pcfg_pull_up_drv_level_1>;
+		};
+
+		/omit-if-no-ref/
+		spi4m2_cs0: spi4m2-cs0 {
+			rockchip,pins =
+				/* spi4_cs0_m2 */
+				<1 RK_PA3 8 &pcfg_pull_up_drv_level_1>;
+		};
+	};
+
+	tsadc {
+		/omit-if-no-ref/
+		tsadcm1_shut: tsadcm1-shut {
+			rockchip,pins =
+				/* tsadcm1_shut */
+				<0 RK_PA2 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shut: tsadc-shut {
+			rockchip,pins =
+				/* tsadc_shut */
+				<0 RK_PA1 2 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		tsadc_shut_org: tsadc-shut-org {
+			rockchip,pins =
+				/* tsadc_shut_org */
+				<0 RK_PA1 1 &pcfg_pull_none>;
+		};
+	};
+
+	uart0 {
+		/omit-if-no-ref/
+		uart0m0_xfer: uart0m0-xfer {
+			rockchip,pins =
+				/* uart0_rx_m0 */
+				<0 RK_PC4 4 &pcfg_pull_up>,
+				/* uart0_tx_m0 */
+				<0 RK_PC5 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m1_xfer: uart0m1-xfer {
+			rockchip,pins =
+				/* uart0_rx_m1 */
+				<0 RK_PB0 4 &pcfg_pull_up>,
+				/* uart0_tx_m1 */
+				<0 RK_PB1 4 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0m2_xfer: uart0m2-xfer {
+			rockchip,pins =
+				/* uart0_rx_m2 */
+				<4 RK_PA4 10 &pcfg_pull_up>,
+				/* uart0_tx_m2 */
+				<4 RK_PA3 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart0_ctsn: uart0-ctsn {
+			rockchip,pins =
+				/* uart0_ctsn */
+				<0 RK_PD1 4 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart0_rtsn: uart0-rtsn {
+			rockchip,pins =
+				/* uart0_rtsn */
+				<0 RK_PC6 4 &pcfg_pull_none>;
+		};
+	};
+
+	uart1 {
+		/omit-if-no-ref/
+		uart1m1_xfer: uart1m1-xfer {
+			rockchip,pins =
+				/* uart1_rx_m1 */
+				<1 RK_PB7 10 &pcfg_pull_up>,
+				/* uart1_tx_m1 */
+				<1 RK_PB6 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_ctsn: uart1m1-ctsn {
+			rockchip,pins =
+				/* uart1m1_ctsn */
+				<1 RK_PD7 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m1_rtsn: uart1m1-rtsn {
+			rockchip,pins =
+				/* uart1m1_rtsn */
+				<1 RK_PD6 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m2_xfer: uart1m2-xfer {
+			rockchip,pins =
+				/* uart1_rx_m2 */
+				<0 RK_PD2 10 &pcfg_pull_up>,
+				/* uart1_tx_m2 */
+				<0 RK_PD1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart1m2_ctsn: uart1m2-ctsn {
+			rockchip,pins =
+				/* uart1m2_ctsn */
+				<0 RK_PD0 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart1m2_rtsn: uart1m2-rtsn {
+			rockchip,pins =
+				/* uart1m2_rtsn */
+				<0 RK_PC7 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart2 {
+		/omit-if-no-ref/
+		uart2m0_xfer: uart2m0-xfer {
+			rockchip,pins =
+				/* uart2_rx_m0 */
+				<0 RK_PB6 10 &pcfg_pull_up>,
+				/* uart2_tx_m0 */
+				<0 RK_PB5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m1_xfer: uart2m1-xfer {
+			rockchip,pins =
+				/* uart2_rx_m1 */
+				<4 RK_PD1 10 &pcfg_pull_up>,
+				/* uart2_tx_m1 */
+				<4 RK_PD0 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2m2_xfer: uart2m2-xfer {
+			rockchip,pins =
+				/* uart2_rx_m2 */
+				<3 RK_PB2 10 &pcfg_pull_up>,
+				/* uart2_tx_m2 */
+				<3 RK_PB1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart2_ctsn: uart2-ctsn {
+			rockchip,pins =
+				/* uart2_ctsn */
+				<3 RK_PB4 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart2_rtsn: uart2-rtsn {
+			rockchip,pins =
+				/* uart2_rtsn */
+				<3 RK_PB3 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart3 {
+		/omit-if-no-ref/
+		uart3m0_xfer: uart3m0-xfer {
+			rockchip,pins =
+				/* uart3_rx_m0 */
+				<1 RK_PC0 10 &pcfg_pull_up>,
+				/* uart3_tx_m0 */
+				<1 RK_PC1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m1_xfer: uart3m1-xfer {
+			rockchip,pins =
+				/* uart3_rx_m1 */
+				<3 RK_PB6 10 &pcfg_pull_up>,
+				/* uart3_tx_m1 */
+				<3 RK_PB5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3m2_xfer: uart3m2-xfer {
+			rockchip,pins =
+				/* uart3_rx_m2 */
+				<4 RK_PA6 10 &pcfg_pull_up>,
+				/* uart3_tx_m2 */
+				<4 RK_PA5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart3_ctsn: uart3-ctsn {
+			rockchip,pins =
+				/* uart3_ctsn */
+				<1 RK_PC3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart3_rtsn: uart3-rtsn {
+			rockchip,pins =
+				/* uart3_rtsn */
+				<1 RK_PC2 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart4 {
+		/omit-if-no-ref/
+		uart4m0_xfer: uart4m0-xfer {
+			rockchip,pins =
+				/* uart4_rx_m0 */
+				<1 RK_PD3 10 &pcfg_pull_up>,
+				/* uart4_tx_m0 */
+				<1 RK_PD2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m1_xfer: uart4m1-xfer {
+			rockchip,pins =
+				/* uart4_rx_m1 */
+				<3 RK_PD0 10 &pcfg_pull_up>,
+				/* uart4_tx_m1 */
+				<3 RK_PD1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4m2_xfer: uart4m2-xfer {
+			rockchip,pins =
+				/* uart4_rx_m2 */
+				<1 RK_PB2 10 &pcfg_pull_up>,
+				/* uart4_tx_m2 */
+				<1 RK_PB3 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart4_ctsn: uart4-ctsn {
+			rockchip,pins =
+				/* uart4_ctsn */
+				<1 RK_PC7 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart4_rtsn: uart4-rtsn {
+			rockchip,pins =
+				/* uart4_rtsn */
+				<1 RK_PC5 10 &pcfg_pull_none>;
+		};
+	};
+
+	uart5 {
+		/omit-if-no-ref/
+		uart5m0_xfer: uart5m0-xfer {
+			rockchip,pins =
+				/* uart5_rx_m0 */
+				<4 RK_PD4 10 &pcfg_pull_up>,
+				/* uart5_tx_m0 */
+				<4 RK_PD5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_ctsn: uart5m0-ctsn {
+			rockchip,pins =
+				/* uart5m0_ctsn */
+				<4 RK_PD2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m0_rtsn: uart5m0-rtsn {
+			rockchip,pins =
+				/* uart5m0_rtsn */
+				<4 RK_PD3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_xfer: uart5m1-xfer {
+			rockchip,pins =
+				/* uart5_rx_m1 */
+				<3 RK_PC5 10 &pcfg_pull_up>,
+				/* uart5_tx_m1 */
+				<3 RK_PC4 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_ctsn: uart5m1-ctsn {
+			rockchip,pins =
+				/* uart5m1_ctsn */
+				<2 RK_PA2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m1_rtsn: uart5m1-rtsn {
+			rockchip,pins =
+				/* uart5m1_rtsn */
+				<2 RK_PA3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart5m2_xfer: uart5m2-xfer {
+			rockchip,pins =
+				/* uart5_rx_m2 */
+				<2 RK_PD4 10 &pcfg_pull_up>,
+				/* uart5_tx_m2 */
+				<2 RK_PD5 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart6 {
+		/omit-if-no-ref/
+		uart6m1_xfer: uart6m1-xfer {
+			rockchip,pins =
+				/* uart6_rx_m1 */
+				<1 RK_PA0 10 &pcfg_pull_up>,
+				/* uart6_tx_m1 */
+				<1 RK_PA1 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_ctsn: uart6m1-ctsn {
+			rockchip,pins =
+				/* uart6m1_ctsn */
+				<1 RK_PA3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m1_rtsn: uart6m1-rtsn {
+			rockchip,pins =
+				/* uart6m1_rtsn */
+				<1 RK_PA2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart6m2_xfer: uart6m2-xfer {
+			rockchip,pins =
+				/* uart6_rx_m2 */
+				<1 RK_PD1 10 &pcfg_pull_up>,
+				/* uart6_tx_m2 */
+				<1 RK_PD0 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart7 {
+		/omit-if-no-ref/
+		uart7m1_xfer: uart7m1-xfer {
+			rockchip,pins =
+				/* uart7_rx_m1 */
+				<3 RK_PC1 10 &pcfg_pull_up>,
+				/* uart7_tx_m1 */
+				<3 RK_PC0 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_ctsn: uart7m1-ctsn {
+			rockchip,pins =
+				/* uart7m1_ctsn */
+				<3 RK_PC3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m1_rtsn: uart7m1-rtsn {
+			rockchip,pins =
+				/* uart7m1_rtsn */
+				<3 RK_PC2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart7m2_xfer: uart7m2-xfer {
+			rockchip,pins =
+				/* uart7_rx_m2 */
+				<1 RK_PB4 10 &pcfg_pull_up>,
+				/* uart7_tx_m2 */
+				<1 RK_PB5 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart8 {
+		/omit-if-no-ref/
+		uart8m0_xfer: uart8m0-xfer {
+			rockchip,pins =
+				/* uart8_rx_m0 */
+				<4 RK_PB1 10 &pcfg_pull_up>,
+				/* uart8_tx_m0 */
+				<4 RK_PB0 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_ctsn: uart8m0-ctsn {
+			rockchip,pins =
+				/* uart8m0_ctsn */
+				<4 RK_PB3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m0_rtsn: uart8m0-rtsn {
+			rockchip,pins =
+				/* uart8m0_rtsn */
+				<4 RK_PB2 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_xfer: uart8m1-xfer {
+			rockchip,pins =
+				/* uart8_rx_m1 */
+				<3 RK_PA3 10 &pcfg_pull_up>,
+				/* uart8_tx_m1 */
+				<3 RK_PA2 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_ctsn: uart8m1-ctsn {
+			rockchip,pins =
+				/* uart8m1_ctsn */
+				<3 RK_PA5 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8m1_rtsn: uart8m1-rtsn {
+			rockchip,pins =
+				/* uart8m1_rtsn */
+				<3 RK_PA4 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart8_xfer: uart8-xfer {
+			rockchip,pins =
+				/* uart8_rx_ */
+				<4 RK_PB1 10 &pcfg_pull_up>;
+		};
+	};
+
+	uart9 {
+		/omit-if-no-ref/
+		uart9m1_xfer: uart9m1-xfer {
+			rockchip,pins =
+				/* uart9_rx_m1 */
+				<4 RK_PB5 10 &pcfg_pull_up>,
+				/* uart9_tx_m1 */
+				<4 RK_PB4 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_ctsn: uart9m1-ctsn {
+			rockchip,pins =
+				/* uart9m1_ctsn */
+				<4 RK_PA1 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m1_rtsn: uart9m1-rtsn {
+			rockchip,pins =
+				/* uart9m1_rtsn */
+				<4 RK_PA0 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_xfer: uart9m2-xfer {
+			rockchip,pins =
+				/* uart9_rx_m2 */
+				<3 RK_PD4 10 &pcfg_pull_up>,
+				/* uart9_tx_m2 */
+				<3 RK_PD5 10 &pcfg_pull_up>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_ctsn: uart9m2-ctsn {
+			rockchip,pins =
+				/* uart9m2_ctsn */
+				<3 RK_PD3 10 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		uart9m2_rtsn: uart9m2-rtsn {
+			rockchip,pins =
+				/* uart9m2_rtsn */
+				<3 RK_PD2 10 &pcfg_pull_none>;
+		};
+	};
+
+	vop {
+		/omit-if-no-ref/
+		vop_pins: vop-pins {
+			rockchip,pins =
+				/* vop_post_empty */
+				<1 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+};
+
+/*
+ * This part is edited handly.
+ */
+&pinctrl {
+	bt656 {
+		/omit-if-no-ref/
+		bt656_pins: bt656-pins {
+			rockchip,pins =
+				/* bt1120_clkout */
+				<4 RK_PB0 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d0 */
+				<4 RK_PA0 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d1 */
+				<4 RK_PA1 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d2 */
+				<4 RK_PA2 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d3 */
+				<4 RK_PA3 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d4 */
+				<4 RK_PA4 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d5 */
+				<4 RK_PA5 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d6 */
+				<4 RK_PA6 2 &pcfg_pull_none_drv_level_2>,
+				/* bt1120_d7 */
+				<4 RK_PA7 2 &pcfg_pull_none_drv_level_2>;
+		};
+	};
+
+	gpio-func {
+		/omit-if-no-ref/
+		tsadc_gpio_func: tsadc-gpio-func {
+			rockchip,pins =
+				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
new file mode 100644
index 000000000..8347adcbd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+	model = "Radxa ROCK 5 Model A";
+	compatible = "radxa,rock-5a", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial2 = &uart2;
+	};
+
+	analog-sound {
+		compatible = "audio-graph-card";
+		label = "rk3588-es8316";
+
+		widgets = "Microphone", "Mic Jack",
+			  "Headphone", "Headphones";
+
+		routing = "MIC2", "Mic Jack",
+			  "Headphones", "HPOL",
+			  "Headphones", "HPOR";
+
+		dais = <&i2s0_8ch_p0>;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&io_led>;
+
+		io-led {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 95 145 195 255>;
+		fan-supply = <&vcc_5v0>;
+		pwms = <&pwm3 0 50000 0>;
+		#cooling-cells = <2>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc_5v0: vcc-5v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc_5v0_en>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m2_xfer>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	es8316: audio-codec@11 {
+		compatible = "everest,es8316";
+		reg = <0x11>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		clock-names = "mclk";
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s0_8ch_p0_0>;
+			};
+		};
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+
+	i2s0_8ch_p0: port {
+		i2s0_8ch_p0_0: endpoint {
+			dai-format = "i2s";
+			mclk-fs = <256>;
+			remote-endpoint = <&es8316_p0_0>;
+		};
+	};
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	pinctrl-names = "default";
+	tx_delay = <0x3a>;
+	rx_delay = <0x3e>;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		/* RTL8211F */
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	leds {
+		io_led: io-led {
+			rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	power {
+		vcc_5v0_en: vcc-5v0-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_rst: rtl8211f-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifibt {
+		wl_reset: wl-reset {
+			rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wl_dis: wl-dis {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		wl_wake_host: wl-wake-host {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_dis: bt-dis {
+			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3m1_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&avcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <400>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "vdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v85_s0: nldo-reg4 {
+				regulator-name = "vdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	status = "okay";
+	phy-supply = <&vcc5v0_host>;
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl_reset &wl_dis &wl_wake_host &bt_dis &bt_wake_host>;
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
new file mode 100644
index 000000000..4aa516ff1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -0,0 +1,2310 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/rk3588-power.h>
+#include <dt-bindings/reset/rockchip,rk3588-cru.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/ata/ahci.h>
+
+/ {
+	compatible = "rockchip,rk3588";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_l0>;
+				};
+				core1 {
+					cpu = <&cpu_l1>;
+				};
+				core2 {
+					cpu = <&cpu_l2>;
+				};
+				core3 {
+					cpu = <&cpu_l3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu_b0>;
+				};
+				core1 {
+					cpu = <&cpu_b1>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu_b2>;
+				};
+				core1 {
+					cpu = <&cpu_b3>;
+				};
+			};
+		};
+
+		cpu_l0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			assigned-clock-rates = <816000000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l0>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_l1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l1>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_l2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l2>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_l3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <530>;
+			clocks = <&scmi_clk SCMI_CLK_CPUL>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <32768>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_cache_l3>;
+			dynamic-power-coefficient = <228>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b0: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x400>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			assigned-clock-rates = <816000000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b0>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b1: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x500>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b1>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b2: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x600>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			assigned-clock-rates = <816000000>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b2>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		cpu_b3: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a76";
+			reg = <0x700>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+			cpu-idle-states = <&CPU_SLEEP>;
+			i-cache-size = <65536>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <65536>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&l2_cache_b3>;
+			dynamic-power-coefficient = <416>;
+			#cooling-cells = <2>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <100>;
+				exit-latency-us = <120>;
+				min-residency-us = <1000>;
+			};
+		};
+
+		l2_cache_l0: l2-cache-l0 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l1: l2-cache-l1 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l2: l2-cache-l2 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_l3: l2-cache-l3 {
+			compatible = "cache";
+			cache-size = <131072>;
+			cache-line-size = <64>;
+			cache-sets = <512>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b0: l2-cache-b0 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b1: l2-cache-b1 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b2: l2-cache-b2 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l2_cache_b3: l2-cache-b3 {
+			compatible = "cache";
+			cache-size = <524288>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+			cache-unified;
+			next-level-cache = <&l3_cache>;
+		};
+
+		l3_cache: l3-cache {
+			compatible = "cache";
+			cache-size = <3145728>;
+			cache-line-size = <64>;
+			cache-sets = <4096>;
+			cache-level = <3>;
+			cache-unified;
+		};
+	};
+
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "arm,scmi-smc";
+			arm,smc-id = <0x82000010>;
+			shmem = <&scmi_shmem>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	pmu-a55 {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition0>;
+	};
+
+	pmu-a76 {
+		compatible = "arm,cortex-a76-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_partition1>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	spll: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <702000000>;
+		clock-output-names = "spll";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+
+	xin24m: clock-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	xin32k: clock-2 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
+	};
+
+	pmu_sram: sram@10f000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x0010f000 0x0 0x100>;
+		ranges = <0 0x0 0x0010f000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scmi_shmem: sram@0 {
+			compatible = "arm,scmi-shmem";
+			reg = <0x0 0x100>;
+		};
+	};
+
+	usb_host0_ehci: usb@fc800000 {
+		compatible = "rockchip,rk3588-ehci", "generic-ehci";
+		reg = <0x0 0xfc800000 0x0 0x40000>;
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
+		phys = <&u2phy2_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fc840000 {
+		compatible = "rockchip,rk3588-ohci", "generic-ohci";
+		reg = <0x0 0xfc840000 0x0 0x40000>;
+		interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, <&cru ACLK_USB>, <&u2phy2>;
+		phys = <&u2phy2_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fc880000 {
+		compatible = "rockchip,rk3588-ehci", "generic-ehci";
+		reg = <0x0 0xfc880000 0x0 0x40000>;
+		interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
+		phys = <&u2phy3_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fc8c0000 {
+		compatible = "rockchip,rk3588-ohci", "generic-ohci";
+		reg = <0x0 0xfc8c0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST_ARB1>, <&cru ACLK_USB>, <&u2phy3>;
+		phys = <&u2phy3_host>;
+		phy-names = "usb";
+		power-domains = <&power RK3588_PD_USB>;
+		status = "disabled";
+	};
+
+	sys_grf: syscon@fd58c000 {
+		compatible = "rockchip,rk3588-sys-grf", "syscon";
+		reg = <0x0 0xfd58c000 0x0 0x1000>;
+	};
+
+	php_grf: syscon@fd5b0000 {
+		compatible = "rockchip,rk3588-php-grf", "syscon";
+		reg = <0x0 0xfd5b0000 0x0 0x1000>;
+	};
+
+	pipe_phy0_grf: syscon@fd5bc000 {
+		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfd5bc000 0x0 0x100>;
+	};
+
+	pipe_phy2_grf: syscon@fd5c4000 {
+		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfd5c4000 0x0 0x100>;
+	};
+
+	usb2phy2_grf: syscon@fd5d8000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd5d8000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy2: usb2-phy@8000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0x8000 0x10>;
+			interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U2_0>, <&cru SRST_P_USB2PHY_U2_0_GRF0>;
+			reset-names = "phy", "apb";
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy2";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy2_host: host-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usb2phy3_grf: syscon@fd5dc000 {
+		compatible = "rockchip,rk3588-usb2phy-grf", "syscon", "simple-mfd";
+		reg = <0x0 0xfd5dc000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy3: usb2-phy@c000 {
+			compatible = "rockchip,rk3588-usb2phy";
+			reg = <0xc000 0x10>;
+			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH 0>;
+			resets = <&cru SRST_OTGPHY_U2_1>, <&cru SRST_P_USB2PHY_U2_1_GRF0>;
+			reset-names = "phy", "apb";
+			clocks = <&cru CLK_USB2PHY_HDPTXRXPHY_REF>;
+			clock-names = "phyclk";
+			clock-output-names = "usb480m_phy3";
+			#clock-cells = <0>;
+			status = "disabled";
+
+			u2phy3_host: host-port {
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ioc: syscon@fd5f0000 {
+		compatible = "rockchip,rk3588-ioc", "syscon";
+		reg = <0x0 0xfd5f0000 0x0 0x10000>;
+	};
+
+	system_sram1: sram@fd600000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xfd600000 0x0 0x100000>;
+		ranges = <0x0 0x0 0xfd600000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	cru: clock-controller@fd7c0000 {
+		compatible = "rockchip,rk3588-cru";
+		reg = <0x0 0xfd7c0000 0x0 0x5c000>;
+		assigned-clocks =
+			<&cru PLL_PPLL>, <&cru PLL_AUPLL>,
+			<&cru PLL_NPLL>, <&cru PLL_GPLL>,
+			<&cru ACLK_CENTER_ROOT>,
+			<&cru HCLK_CENTER_ROOT>, <&cru ACLK_CENTER_LOW_ROOT>,
+			<&cru ACLK_TOP_ROOT>, <&cru PCLK_TOP_ROOT>,
+			<&cru ACLK_LOW_TOP_ROOT>, <&cru PCLK_PMU0_ROOT>,
+			<&cru HCLK_PMU_CM0_ROOT>, <&cru ACLK_VOP>,
+			<&cru ACLK_BUS_ROOT>, <&cru CLK_150M_SRC>,
+			<&cru CLK_GPU>;
+		assigned-clock-rates =
+			<1100000000>, <786432000>,
+			<850000000>, <1188000000>,
+			<702000000>,
+			<400000000>, <500000000>,
+			<800000000>, <100000000>,
+			<400000000>, <100000000>,
+			<200000000>, <500000000>,
+			<375000000>, <150000000>,
+			<200000000>;
+		rockchip,grf = <&php_grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	i2c0: i2c@fd880000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfd880000 0x0 0x1000>;
+		interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
+		clock-names = "i2c", "pclk";
+		pinctrl-0 = <&i2c0m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart0: serial@fd890000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfd890000 0x0 0x100>;
+		interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 6>, <&dmac0 7>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart0m1_xfer>;
+		pinctrl-names = "default";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@fd8b0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0000 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm0m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@fd8b0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0010 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm1m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@fd8b0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0020 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm2m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@fd8b0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfd8b0030 0x0 0x10>;
+		clocks = <&cru CLK_PMU1PWM>, <&cru PCLK_PMU1PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm3m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pmu: power-management@fd8d8000 {
+		compatible = "rockchip,rk3588-pmu", "syscon", "simple-mfd";
+		reg = <0x0 0xfd8d8000 0x0 0x400>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3588-power-controller";
+			#address-cells = <1>;
+			#power-domain-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			/* These power domains are grouped by VD_NPU */
+			power-domain@RK3588_PD_NPU {
+				reg = <RK3588_PD_NPU>;
+				#power-domain-cells = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				power-domain@RK3588_PD_NPUTOP {
+					reg = <RK3588_PD_NPUTOP>;
+					clocks = <&cru HCLK_NPU_ROOT>,
+						 <&cru PCLK_NPU_ROOT>,
+						 <&cru CLK_NPU_DSU0>,
+						 <&cru HCLK_NPU_CM0_ROOT>;
+					pm_qos = <&qos_npu0_mwr>,
+						 <&qos_npu0_mro>,
+						 <&qos_mcu_npu>;
+					#power-domain-cells = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@RK3588_PD_NPU1 {
+						reg = <RK3588_PD_NPU1>;
+						clocks = <&cru HCLK_NPU_ROOT>,
+							 <&cru PCLK_NPU_ROOT>,
+							 <&cru CLK_NPU_DSU0>;
+						pm_qos = <&qos_npu1>;
+						#power-domain-cells = <0>;
+					};
+					power-domain@RK3588_PD_NPU2 {
+						reg = <RK3588_PD_NPU2>;
+						clocks = <&cru HCLK_NPU_ROOT>,
+							 <&cru PCLK_NPU_ROOT>,
+							 <&cru CLK_NPU_DSU0>;
+						pm_qos = <&qos_npu2>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+			/* These power domains are grouped by VD_GPU */
+			power-domain@RK3588_PD_GPU {
+				reg = <RK3588_PD_GPU>;
+				clocks = <&cru CLK_GPU>,
+					 <&cru CLK_GPU_COREGROUP>,
+					 <&cru CLK_GPU_STACKS>;
+				pm_qos = <&qos_gpu_m0>,
+					 <&qos_gpu_m1>,
+					 <&qos_gpu_m2>,
+					 <&qos_gpu_m3>;
+				#power-domain-cells = <0>;
+			};
+			/* These power domains are grouped by VD_VCODEC */
+			power-domain@RK3588_PD_VCODEC {
+				reg = <RK3588_PD_VCODEC>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				power-domain@RK3588_PD_RKVDEC0 {
+					reg = <RK3588_PD_RKVDEC0>;
+					clocks = <&cru HCLK_RKVDEC0>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>,
+						 <&cru ACLK_RKVDEC0>,
+						 <&cru ACLK_RKVDEC_CCU>;
+					pm_qos = <&qos_rkvdec0>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RKVDEC1 {
+					reg = <RK3588_PD_RKVDEC1>;
+					clocks = <&cru HCLK_RKVDEC1>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>,
+						 <&cru ACLK_RKVDEC1>;
+					pm_qos = <&qos_rkvdec1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_VENC0 {
+					reg = <RK3588_PD_VENC0>;
+					clocks = <&cru HCLK_RKVENC0>,
+						 <&cru ACLK_RKVENC0>;
+					pm_qos = <&qos_rkvenc0_m0ro>,
+						 <&qos_rkvenc0_m1ro>,
+						 <&qos_rkvenc0_m2wo>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					power-domain@RK3588_PD_VENC1 {
+						reg = <RK3588_PD_VENC1>;
+						clocks = <&cru HCLK_RKVENC1>,
+							 <&cru HCLK_RKVENC0>,
+							 <&cru ACLK_RKVENC0>,
+							 <&cru ACLK_RKVENC1>;
+						pm_qos = <&qos_rkvenc1_m0ro>,
+							 <&qos_rkvenc1_m1ro>,
+							 <&qos_rkvenc1_m2wo>;
+						#power-domain-cells = <0>;
+					};
+				};
+			};
+			/* These power domains are grouped by VD_LOGIC */
+			power-domain@RK3588_PD_VDPU {
+				reg = <RK3588_PD_VDPU>;
+				clocks = <&cru HCLK_VDPU_ROOT>,
+					 <&cru ACLK_VDPU_LOW_ROOT>,
+					 <&cru ACLK_VDPU_ROOT>,
+					 <&cru ACLK_JPEG_DECODER_ROOT>,
+					 <&cru ACLK_IEP2P0>,
+					 <&cru HCLK_IEP2P0>,
+					 <&cru ACLK_JPEG_ENCODER0>,
+					 <&cru HCLK_JPEG_ENCODER0>,
+					 <&cru ACLK_JPEG_ENCODER1>,
+					 <&cru HCLK_JPEG_ENCODER1>,
+					 <&cru ACLK_JPEG_ENCODER2>,
+					 <&cru HCLK_JPEG_ENCODER2>,
+					 <&cru ACLK_JPEG_ENCODER3>,
+					 <&cru HCLK_JPEG_ENCODER3>,
+					 <&cru ACLK_JPEG_DECODER>,
+					 <&cru HCLK_JPEG_DECODER>,
+					 <&cru ACLK_RGA2>,
+					 <&cru HCLK_RGA2>;
+				pm_qos = <&qos_iep>,
+					 <&qos_jpeg_dec>,
+					 <&qos_jpeg_enc0>,
+					 <&qos_jpeg_enc1>,
+					 <&qos_jpeg_enc2>,
+					 <&qos_jpeg_enc3>,
+					 <&qos_rga2_mro>,
+					 <&qos_rga2_mwo>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+
+				power-domain@RK3588_PD_AV1 {
+					reg = <RK3588_PD_AV1>;
+					clocks = <&cru PCLK_AV1>,
+						 <&cru ACLK_AV1>,
+						 <&cru HCLK_VDPU_ROOT>;
+					pm_qos = <&qos_av1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RKVDEC0 {
+					reg = <RK3588_PD_RKVDEC0>;
+					clocks = <&cru HCLK_RKVDEC0>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>,
+						 <&cru ACLK_RKVDEC0>;
+					pm_qos = <&qos_rkvdec0>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RKVDEC1 {
+					reg = <RK3588_PD_RKVDEC1>;
+					clocks = <&cru HCLK_RKVDEC1>,
+						 <&cru HCLK_VDPU_ROOT>,
+						 <&cru ACLK_VDPU_ROOT>;
+					pm_qos = <&qos_rkvdec1>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_RGA30 {
+					reg = <RK3588_PD_RGA30>;
+					clocks = <&cru ACLK_RGA3_0>,
+						 <&cru HCLK_RGA3_0>;
+					pm_qos = <&qos_rga3_0>;
+					#power-domain-cells = <0>;
+				};
+			};
+			power-domain@RK3588_PD_VOP {
+				reg = <RK3588_PD_VOP>;
+				clocks = <&cru PCLK_VOP_ROOT>,
+					 <&cru HCLK_VOP_ROOT>,
+					 <&cru ACLK_VOP>;
+				pm_qos = <&qos_vop_m0>,
+					 <&qos_vop_m1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				power-domain@RK3588_PD_VO0 {
+					reg = <RK3588_PD_VO0>;
+					clocks = <&cru PCLK_VO0_ROOT>,
+						 <&cru PCLK_VO0_S_ROOT>,
+						 <&cru HCLK_VO0_S_ROOT>,
+						 <&cru ACLK_VO0_ROOT>,
+						 <&cru HCLK_HDCP0>,
+						 <&cru ACLK_HDCP0>,
+						 <&cru HCLK_VOP_ROOT>;
+					pm_qos = <&qos_hdcp0>;
+					#power-domain-cells = <0>;
+				};
+			};
+			power-domain@RK3588_PD_VO1 {
+				reg = <RK3588_PD_VO1>;
+				clocks = <&cru PCLK_VO1_ROOT>,
+					 <&cru PCLK_VO1_S_ROOT>,
+					 <&cru HCLK_VO1_S_ROOT>,
+					 <&cru HCLK_HDCP1>,
+					 <&cru ACLK_HDCP1>,
+					 <&cru ACLK_HDMIRX_ROOT>,
+					 <&cru HCLK_VO1USB_TOP_ROOT>;
+				pm_qos = <&qos_hdcp1>,
+					 <&qos_hdmirx>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_VI {
+				reg = <RK3588_PD_VI>;
+				clocks = <&cru HCLK_VI_ROOT>,
+					 <&cru PCLK_VI_ROOT>,
+					 <&cru HCLK_ISP0>,
+					 <&cru ACLK_ISP0>,
+					 <&cru HCLK_VICAP>,
+					 <&cru ACLK_VICAP>;
+				pm_qos = <&qos_isp0_mro>,
+					 <&qos_isp0_mwo>,
+					 <&qos_vicap_m0>,
+					 <&qos_vicap_m1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				power-domain@RK3588_PD_ISP1 {
+					reg = <RK3588_PD_ISP1>;
+					clocks = <&cru HCLK_ISP1>,
+						 <&cru ACLK_ISP1>,
+						 <&cru HCLK_VI_ROOT>,
+						 <&cru PCLK_VI_ROOT>;
+					pm_qos = <&qos_isp1_mwo>,
+						 <&qos_isp1_mro>;
+					#power-domain-cells = <0>;
+				};
+				power-domain@RK3588_PD_FEC {
+					reg = <RK3588_PD_FEC>;
+					clocks = <&cru HCLK_FISHEYE0>,
+						 <&cru ACLK_FISHEYE0>,
+						 <&cru HCLK_FISHEYE1>,
+						 <&cru ACLK_FISHEYE1>,
+						 <&cru PCLK_VI_ROOT>;
+					pm_qos = <&qos_fisheye0>,
+						 <&qos_fisheye1>;
+					#power-domain-cells = <0>;
+				};
+			};
+			power-domain@RK3588_PD_RGA31 {
+				reg = <RK3588_PD_RGA31>;
+				clocks = <&cru HCLK_RGA3_1>,
+					 <&cru ACLK_RGA3_1>;
+				pm_qos = <&qos_rga3_1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_USB {
+				reg = <RK3588_PD_USB>;
+				clocks = <&cru PCLK_PHP_ROOT>,
+					 <&cru ACLK_USB_ROOT>,
+					 <&cru ACLK_USB>,
+					 <&cru HCLK_USB_ROOT>,
+					 <&cru HCLK_HOST0>,
+					 <&cru HCLK_HOST_ARB0>,
+					 <&cru HCLK_HOST1>,
+					 <&cru HCLK_HOST_ARB1>;
+				pm_qos = <&qos_usb3_0>,
+					 <&qos_usb3_1>,
+					 <&qos_usb2host_0>,
+					 <&qos_usb2host_1>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_GMAC {
+				reg = <RK3588_PD_GMAC>;
+				clocks = <&cru PCLK_PHP_ROOT>,
+					 <&cru ACLK_PCIE_ROOT>,
+					 <&cru ACLK_PHP_ROOT>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_PCIE {
+				reg = <RK3588_PD_PCIE>;
+				clocks = <&cru PCLK_PHP_ROOT>,
+					 <&cru ACLK_PCIE_ROOT>,
+					 <&cru ACLK_PHP_ROOT>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_SDIO {
+				reg = <RK3588_PD_SDIO>;
+				clocks = <&cru HCLK_SDIO>,
+					 <&cru HCLK_NVM_ROOT>;
+				pm_qos = <&qos_sdio>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_AUDIO {
+				reg = <RK3588_PD_AUDIO>;
+				clocks = <&cru HCLK_AUDIO_ROOT>,
+					 <&cru PCLK_AUDIO_ROOT>;
+				#power-domain-cells = <0>;
+			};
+			power-domain@RK3588_PD_SDMMC {
+				reg = <RK3588_PD_SDMMC>;
+				pm_qos = <&qos_sdmmc>;
+				#power-domain-cells = <0>;
+			};
+		};
+	};
+
+	i2s4_8ch: i2s@fddc0000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddc0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S4_8CH_TX>, <&cru MCLK_I2S4_8CH_TX>, <&cru HCLK_I2S4_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S4_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 0>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_M_I2S4_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s5_8ch: i2s@fddf0000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddf0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S5_8CH_TX>, <&cru MCLK_I2S5_8CH_TX>, <&cru HCLK_I2S5_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S5_8CH_TX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 2>;
+		dma-names = "tx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S5_8CH_TX>;
+		reset-names = "tx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s9_8ch: i2s@fddfc000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfddfc000 0x0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S9_8CH_RX>, <&cru MCLK_I2S9_8CH_RX>, <&cru HCLK_I2S9_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S9_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac2 23>;
+		dma-names = "rx";
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_M_I2S9_8CH_RX>;
+		reset-names = "rx-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	qos_gpu_m0: qos@fdf35000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35000 0x0 0x20>;
+	};
+
+	qos_gpu_m1: qos@fdf35200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35200 0x0 0x20>;
+	};
+
+	qos_gpu_m2: qos@fdf35400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35400 0x0 0x20>;
+	};
+
+	qos_gpu_m3: qos@fdf35600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf35600 0x0 0x20>;
+	};
+
+	qos_rga3_1: qos@fdf36000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf36000 0x0 0x20>;
+	};
+
+	qos_sdio: qos@fdf39000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf39000 0x0 0x20>;
+	};
+
+	qos_sdmmc: qos@fdf3d800 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3d800 0x0 0x20>;
+	};
+
+	qos_usb3_1: qos@fdf3e000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e000 0x0 0x20>;
+	};
+
+	qos_usb3_0: qos@fdf3e200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e200 0x0 0x20>;
+	};
+
+	qos_usb2host_0: qos@fdf3e400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e400 0x0 0x20>;
+	};
+
+	qos_usb2host_1: qos@fdf3e600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf3e600 0x0 0x20>;
+	};
+
+	qos_fisheye0: qos@fdf40000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40000 0x0 0x20>;
+	};
+
+	qos_fisheye1: qos@fdf40200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40200 0x0 0x20>;
+	};
+
+	qos_isp0_mro: qos@fdf40400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40400 0x0 0x20>;
+	};
+
+	qos_isp0_mwo: qos@fdf40500 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40500 0x0 0x20>;
+	};
+
+	qos_vicap_m0: qos@fdf40600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40600 0x0 0x20>;
+	};
+
+	qos_vicap_m1: qos@fdf40800 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf40800 0x0 0x20>;
+	};
+
+	qos_isp1_mwo: qos@fdf41000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf41000 0x0 0x20>;
+	};
+
+	qos_isp1_mro: qos@fdf41100 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf41100 0x0 0x20>;
+	};
+
+	qos_rkvenc0_m0ro: qos@fdf60000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf60000 0x0 0x20>;
+	};
+
+	qos_rkvenc0_m1ro: qos@fdf60200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf60200 0x0 0x20>;
+	};
+
+	qos_rkvenc0_m2wo: qos@fdf60400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf60400 0x0 0x20>;
+	};
+
+	qos_rkvenc1_m0ro: qos@fdf61000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf61000 0x0 0x20>;
+	};
+
+	qos_rkvenc1_m1ro: qos@fdf61200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf61200 0x0 0x20>;
+	};
+
+	qos_rkvenc1_m2wo: qos@fdf61400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf61400 0x0 0x20>;
+	};
+
+	qos_rkvdec0: qos@fdf62000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf62000 0x0 0x20>;
+	};
+
+	qos_rkvdec1: qos@fdf63000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf63000 0x0 0x20>;
+	};
+
+	qos_av1: qos@fdf64000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf64000 0x0 0x20>;
+	};
+
+	qos_iep: qos@fdf66000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66000 0x0 0x20>;
+	};
+
+	qos_jpeg_dec: qos@fdf66200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66200 0x0 0x20>;
+	};
+
+	qos_jpeg_enc0: qos@fdf66400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66400 0x0 0x20>;
+	};
+
+	qos_jpeg_enc1: qos@fdf66600 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66600 0x0 0x20>;
+	};
+
+	qos_jpeg_enc2: qos@fdf66800 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66800 0x0 0x20>;
+	};
+
+	qos_jpeg_enc3: qos@fdf66a00 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66a00 0x0 0x20>;
+	};
+
+	qos_rga2_mro: qos@fdf66c00 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66c00 0x0 0x20>;
+	};
+
+	qos_rga2_mwo: qos@fdf66e00 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf66e00 0x0 0x20>;
+	};
+
+	qos_rga3_0: qos@fdf67000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf67000 0x0 0x20>;
+	};
+
+	qos_vdpu: qos@fdf67200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf67200 0x0 0x20>;
+	};
+
+	qos_npu1: qos@fdf70000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf70000 0x0 0x20>;
+	};
+
+	qos_npu2: qos@fdf71000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf71000 0x0 0x20>;
+	};
+
+	qos_npu0_mwr: qos@fdf72000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf72000 0x0 0x20>;
+	};
+
+	qos_npu0_mro: qos@fdf72200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf72200 0x0 0x20>;
+	};
+
+	qos_mcu_npu: qos@fdf72400 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf72400 0x0 0x20>;
+	};
+
+	qos_hdcp0: qos@fdf80000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf80000 0x0 0x20>;
+	};
+
+	qos_hdcp1: qos@fdf81000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf81000 0x0 0x20>;
+	};
+
+	qos_hdmirx: qos@fdf81200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf81200 0x0 0x20>;
+	};
+
+	qos_vop_m0: qos@fdf82000 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf82000 0x0 0x20>;
+	};
+
+	qos_vop_m1: qos@fdf82200 {
+		compatible = "rockchip,rk3588-qos", "syscon";
+		reg = <0x0 0xfdf82200 0x0 0x20>;
+	};
+
+	pcie2x1l1: pcie@fe180000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x30 0x3f>;
+		clocks = <&cru ACLK_PCIE_1L1_MSTR>, <&cru ACLK_PCIE_1L1_SLV>,
+			 <&cru ACLK_PCIE_1L1_DBI>, <&cru PCLK_PCIE_1L1>,
+			 <&cru CLK_PCIE_AUX3>, <&cru CLK_PCIE1L1_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l1_intc 0>,
+				<0 0 0 2 &pcie2x1l1_intc 1>,
+				<0 0 0 3 &pcie2x1l1_intc 2>,
+				<0 0 0 4 &pcie2x1l1_intc 3>;
+		linux,pci-domain = <3>;
+		max-link-speed = <2>;
+		msi-map = <0x3000 &its0 0x3000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy2_psu PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf3100000 0x0 0xf3100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf3200000 0x0 0xf3200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0xc0000000 0x0 0x40000000>;
+		reg = <0xa 0x40c00000 0x0 0x00400000>,
+		      <0x0 0xfe180000 0x0 0x00010000>,
+		      <0x0 0xf3000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE3_POWER_UP>, <&cru SRST_P_PCIE3>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l1_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie2x1l2: pcie@fe190000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		bus-range = <0x40 0x4f>;
+		clocks = <&cru ACLK_PCIE_1L2_MSTR>, <&cru ACLK_PCIE_1L2_SLV>,
+			 <&cru ACLK_PCIE_1L2_DBI>, <&cru PCLK_PCIE_1L2>,
+			 <&cru CLK_PCIE_AUX4>, <&cru CLK_PCIE1L2_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie2x1l2_intc 0>,
+				<0 0 0 2 &pcie2x1l2_intc 1>,
+				<0 0 0 3 &pcie2x1l2_intc 2>,
+				<0 0 0 4 &pcie2x1l2_intc 3>;
+		linux,pci-domain = <4>;
+		max-link-speed = <2>;
+		msi-map = <0x4000 &its0 0x4000 0x1000>;
+		num-lanes = <1>;
+		phys = <&combphy0_ps PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf4100000 0x0 0xf4100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf4200000 0x0 0xf4200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0xa 0x00000000 0x0 0x40000000>;
+		reg = <0xa 0x41000000 0x0 0x00400000>,
+		      <0x0 0xfe190000 0x0 0x00010000>,
+		      <0x0 0xf4000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE4_POWER_UP>, <&cru SRST_P_PCIE4>;
+		reset-names = "pwr", "pipe";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		pcie2x1l2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	gmac1: ethernet@fe1c0000 {
+		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
+		reg = <0x0 0xfe1c0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
+			 <&cru PCLK_GMAC1>, <&cru ACLK_GMAC1>,
+			 <&cru CLK_GMAC1_PTP_REF>;
+		clock-names = "stmmaceth", "clk_mac_ref",
+			      "pclk_mac", "aclk_mac",
+			      "ptp_ref";
+		power-domains = <&power RK3588_PD_GMAC>;
+		resets = <&cru SRST_A_GMAC1>;
+		reset-names = "stmmaceth";
+		rockchip,grf = <&sys_grf>;
+		rockchip,php-grf = <&php_grf>;
+		snps,axi-config = <&gmac1_stmmac_axi_setup>;
+		snps,mixed-burst;
+		snps,mtl-rx-config = <&gmac1_mtl_rx_setup>;
+		snps,mtl-tx-config = <&gmac1_mtl_tx_setup>;
+		snps,tso;
+		status = "disabled";
+
+		mdio1: mdio {
+			compatible = "snps,dwmac-mdio";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+		};
+
+		gmac1_stmmac_axi_setup: stmmac-axi-config {
+			snps,blen = <0 0 0 0 16 8 4>;
+			snps,wr_osr_lmt = <4>;
+			snps,rd_osr_lmt = <8>;
+		};
+
+		gmac1_mtl_rx_setup: rx-queues-config {
+			snps,rx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+
+		gmac1_mtl_tx_setup: tx-queues-config {
+			snps,tx-queues-to-use = <2>;
+			queue0 {};
+			queue1 {};
+		};
+	};
+
+	sata0: sata@fe210000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe210000 0 0x1000>;
+		interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+			 <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+			 <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy0_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	sata2: sata@fe230000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe230000 0 0x1000>;
+		interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
+			 <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
+			 <&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy2_psu PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	sdmmc: mmc@fe2c0000 {
+		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x0 0xfe2c0000 0x0 0x4000>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&scmi_clk SCMI_HCLK_SD>, <&scmi_clk SCMI_CCLK_SD>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+		power-domains = <&power RK3588_PD_SDMMC>;
+		status = "disabled";
+	};
+
+	sdio: mmc@fe2d0000 {
+		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x00 0xfe2d0000 0x00 0x4000>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+		fifo-depth = <0x100>;
+		max-frequency = <200000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdiom1_pins>;
+		power-domains = <&power RK3588_PD_SDIO>;
+		status = "disabled";
+	};
+
+	sdhci: mmc@fe2e0000 {
+		compatible = "rockchip,rk3588-dwcmshc";
+		reg = <0x0 0xfe2e0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru BCLK_EMMC>, <&cru TMCLK_EMMC>, <&cru CCLK_EMMC>;
+		assigned-clock-rates = <200000000>, <24000000>, <200000000>;
+		clocks = <&cru CCLK_EMMC>, <&cru HCLK_EMMC>,
+			 <&cru ACLK_EMMC>, <&cru BCLK_EMMC>,
+			 <&cru TMCLK_EMMC>;
+		clock-names = "core", "bus", "axi", "block", "timer";
+		max-frequency = <200000000>;
+		pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>,
+			    <&emmc_cmd>, <&emmc_data_strobe>;
+		pinctrl-names = "default";
+		resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
+			 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
+			 <&cru SRST_T_EMMC>;
+		reset-names = "core", "bus", "axi", "block", "timer";
+		status = "disabled";
+	};
+
+	i2s0_8ch: i2s@fe470000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfe470000 0x0 0x1000>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>, <&cru PLL_AUPLL>;
+		dmas = <&dmac0 0>, <&dmac0 1>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_lrck
+			     &i2s0_sclk
+			     &i2s0_sdi0
+			     &i2s0_sdi1
+			     &i2s0_sdi2
+			     &i2s0_sdi3
+			     &i2s0_sdo0
+			     &i2s0_sdo1
+			     &i2s0_sdo2
+			     &i2s0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s1_8ch: i2s@fe480000 {
+		compatible = "rockchip,rk3588-i2s-tdm";
+		reg = <0x0 0xfe480000 0x0 0x1000>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>, <&cru HCLK_I2S1_8CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac0 2>, <&dmac0 3>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1m0_lrck
+			     &i2s1m0_sclk
+			     &i2s1m0_sdi0
+			     &i2s1m0_sdi1
+			     &i2s1m0_sdi2
+			     &i2s1m0_sdi3
+			     &i2s1m0_sdo0
+			     &i2s1m0_sdo1
+			     &i2s1m0_sdo2
+			     &i2s1m0_sdo3>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s2_2ch: i2s@fe490000 {
+		compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xfe490000 0x0 0x1000>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		assigned-clocks = <&cru CLK_I2S2_2CH_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac1 0>, <&dmac1 1>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2m1_lrck
+			     &i2s2m1_sclk
+			     &i2s2m1_sdi
+			     &i2s2m1_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	i2s3_2ch: i2s@fe4a0000 {
+		compatible = "rockchip,rk3588-i2s", "rockchip,rk3066-i2s";
+		reg = <0x0 0xfe4a0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru MCLK_I2S3_2CH>, <&cru HCLK_I2S3_2CH>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		assigned-clocks = <&cru CLK_I2S3_2CH_SRC>;
+		assigned-clock-parents = <&cru PLL_AUPLL>;
+		dmas = <&dmac1 2>, <&dmac1 3>;
+		dma-names = "tx", "rx";
+		power-domains = <&power RK3588_PD_AUDIO>;
+		rockchip,trcm-sync-tx-only;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s3_lrck
+			     &i2s3_sclk
+			     &i2s3_sdi
+			     &i2s3_sdo>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@fe600000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0xfe600000 0 0x10000>, /* GICD */
+		      <0x0 0xfe680000 0 0x100000>; /* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-controller;
+		mbi-alias = <0x0 0xfe610000>;
+		mbi-ranges = <424 56>;
+		msi-controller;
+		ranges;
+		#address-cells = <2>;
+		#interrupt-cells = <4>;
+		#size-cells = <2>;
+
+		its0: msi-controller@fe640000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0xfe640000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+
+		its1: msi-controller@fe660000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x0 0xfe660000 0x0 0x20000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+
+		ppi-partitions {
+			ppi_partition0: interrupt-partition-0 {
+				affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
+			};
+
+			ppi_partition1: interrupt-partition-1 {
+				affinity = <&cpu_b0 &cpu_b1 &cpu_b2 &cpu_b3>;
+			};
+		};
+	};
+
+	dmac0: dma-controller@fea10000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfea10000 0x0 0x4000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH 0>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC0>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	dmac1: dma-controller@fea30000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfea30000 0x0 0x4000>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH 0>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC1>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	i2c1: i2c@fea90000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfea90000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c1m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@feaa0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeaa0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C2>, <&cru PCLK_I2C2>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c2m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@feab0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeab0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c3m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@feac0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeac0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C4>, <&cru PCLK_I2C4>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c4m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@fead0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfead0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c5m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	timer0: timer@feae0000 {
+		compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xfeae0000 0x0 0x20>;
+		interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>;
+		clock-names = "pclk", "timer";
+	};
+
+	wdt: watchdog@feaf0000 {
+		compatible = "rockchip,rk3588-wdt", "snps,dw-wdt";
+		reg = <0x0 0xfeaf0000 0x0 0x100>;
+		clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
+		clock-names = "tclk", "pclk";
+		interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	spi0: spi@feb00000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb00000 0x0 0x1000>;
+		interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 14>, <&dmac0 15>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@feb10000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb10000 0x0 0x1000>;
+		interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac0 16>, <&dmac0 17>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi1m1_cs0 &spi1m1_cs1 &spi1m1_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@feb20000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb20000 0x0 0x1000>;
+		interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 15>, <&dmac1 16>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi2m2_cs0 &spi2m2_cs1 &spi2m2_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@feb30000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfeb30000 0x0 0x1000>;
+		interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI3>, <&cru PCLK_SPI3>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac1 17>, <&dmac1 18>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi3m1_cs0 &spi3m1_cs1 &spi3m1_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	uart1: serial@feb40000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb40000 0x0 0x100>;
+		interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 8>, <&dmac0 9>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart1m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart2: serial@feb50000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb50000 0x0 0x100>;
+		interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 10>, <&dmac0 11>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart2m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart3: serial@feb60000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb60000 0x0 0x100>;
+		interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac0 12>, <&dmac0 13>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart3m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart4: serial@feb70000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb70000 0x0 0x100>;
+		interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac1 9>, <&dmac1 10>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart4m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart5: serial@feb80000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb80000 0x0 0x100>;
+		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac1 11>, <&dmac1 12>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart5m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart6: serial@feb90000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeb90000 0x0 0x100>;
+		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac1 13>, <&dmac1 14>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart6m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart7: serial@feba0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfeba0000 0x0 0x100>;
+		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac2 7>, <&dmac2 8>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart7m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart8: serial@febb0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfebb0000 0x0 0x100>;
+		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART8>, <&cru PCLK_UART8>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac2 9>, <&dmac2 10>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart8m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	uart9: serial@febc0000 {
+		compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xfebc0000 0x0 0x100>;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru SCLK_UART9>, <&cru PCLK_UART9>;
+		clock-names = "baudclk", "apb_pclk";
+		dmas = <&dmac2 11>, <&dmac2 12>;
+		dma-names = "tx", "rx";
+		pinctrl-0 = <&uart9m1_xfer>;
+		pinctrl-names = "default";
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	pwm4: pwm@febd0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm4m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm5: pwm@febd0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm5m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm6: pwm@febd0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm6m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm7: pwm@febd0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebd0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM1>, <&cru PCLK_PWM1>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm7m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm8: pwm@febe0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm8m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm9: pwm@febe0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm9m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm10: pwm@febe0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm10m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm11: pwm@febe0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebe0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM2>, <&cru PCLK_PWM2>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm11m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm12: pwm@febf0000 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0000 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm12m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm13: pwm@febf0010 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0010 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm13m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm14: pwm@febf0020 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0020 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm14m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm15: pwm@febf0030 {
+		compatible = "rockchip,rk3588-pwm", "rockchip,rk3328-pwm";
+		reg = <0x0 0xfebf0030 0x0 0x10>;
+		clocks = <&cru CLK_PWM3>, <&cru PCLK_PWM3>;
+		clock-names = "pwm", "pclk";
+		pinctrl-0 = <&pwm15m0_pins>;
+		pinctrl-names = "default";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	tsadc: tsadc@fec00000 {
+		compatible = "rockchip,rk3588-tsadc";
+		reg = <0x0 0xfec00000 0x0 0x400>;
+		interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		assigned-clocks = <&cru CLK_TSADC>;
+		assigned-clock-rates = <2000000>;
+		resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb", "tsadc";
+		rockchip,hw-tshut-temp = <120000>;
+		rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+		rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+		pinctrl-0 = <&tsadc_gpio_func>;
+		pinctrl-1 = <&tsadc_shut>;
+		pinctrl-names = "gpio", "otpout";
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
+	saradc: adc@fec10000 {
+		compatible = "rockchip,rk3588-saradc";
+		reg = <0x0 0xfec10000 0x0 0x10000>;
+		interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>;
+		#io-channel-cells = <1>;
+		clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_P_SARADC>;
+		reset-names = "saradc-apb";
+		status = "disabled";
+	};
+
+	i2c6: i2c@fec80000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfec80000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c6m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@fec90000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfec90000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C7>, <&cru PCLK_I2C7>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c7m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@feca0000 {
+		compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
+		reg = <0x0 0xfeca0000 0x0 0x1000>;
+		clocks = <&cru CLK_I2C8>, <&cru PCLK_I2C8>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-0 = <&i2c8m0_xfer>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@fecb0000 {
+		compatible = "rockchip,rk3588-spi", "rockchip,rk3066-spi";
+		reg = <0x0 0xfecb0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru CLK_SPI4>, <&cru PCLK_SPI4>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac2 13>, <&dmac2 14>;
+		dma-names = "tx", "rx";
+		num-cs = <2>;
+		pinctrl-0 = <&spi4m0_cs0 &spi4m0_cs1 &spi4m0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	otp: efuse@fecc0000 {
+		compatible = "rockchip,rk3588-otp";
+		reg = <0x0 0xfecc0000 0x0 0x400>;
+		clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>,
+			 <&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>;
+		clock-names = "otp", "apb_pclk", "phy", "arb";
+		resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>,
+			 <&cru SRST_OTPC_ARB>;
+		reset-names = "otp", "apb", "arb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cpu_code: cpu-code@2 {
+			reg = <0x02 0x2>;
+		};
+
+		otp_id: id@7 {
+			reg = <0x07 0x10>;
+		};
+
+		cpub0_leakage: cpu-leakage@17 {
+			reg = <0x17 0x1>;
+		};
+
+		cpub1_leakage: cpu-leakage@18 {
+			reg = <0x18 0x1>;
+		};
+
+		cpul_leakage: cpu-leakage@19 {
+			reg = <0x19 0x1>;
+		};
+
+		log_leakage: log-leakage@1a {
+			reg = <0x1a 0x1>;
+		};
+
+		gpu_leakage: gpu-leakage@1b {
+			reg = <0x1b 0x1>;
+		};
+
+		otp_cpu_version: cpu-version@1c {
+			reg = <0x1c 0x1>;
+			bits = <3 3>;
+		};
+
+		npu_leakage: npu-leakage@28 {
+			reg = <0x28 0x1>;
+		};
+
+		codec_leakage: codec-leakage@29 {
+			reg = <0x29 0x1>;
+		};
+	};
+
+	dmac2: dma-controller@fed10000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xfed10000 0x0 0x4000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH 0>;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC2>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+	};
+
+	combphy0_ps: phy@fee00000 {
+		compatible = "rockchip,rk3588-naneng-combphy";
+		reg = <0x0 0xfee00000 0x0 0x100>;
+		clocks = <&cru CLK_REF_PIPE_PHY0>, <&cru PCLK_PCIE_COMBO_PIPE_PHY0>,
+			 <&cru PCLK_PHP_ROOT>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&cru CLK_REF_PIPE_PHY0>;
+		assigned-clock-rates = <100000000>;
+		#phy-cells = <1>;
+		resets = <&cru SRST_REF_PIPE_PHY0>, <&cru SRST_P_PCIE2_PHY0>;
+		reset-names = "phy", "apb";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+		status = "disabled";
+	};
+
+	combphy2_psu: phy@fee20000 {
+		compatible = "rockchip,rk3588-naneng-combphy";
+		reg = <0x0 0xfee20000 0x0 0x100>;
+		clocks = <&cru CLK_REF_PIPE_PHY2>, <&cru PCLK_PCIE_COMBO_PIPE_PHY2>,
+			 <&cru PCLK_PHP_ROOT>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&cru CLK_REF_PIPE_PHY2>;
+		assigned-clock-rates = <100000000>;
+		#phy-cells = <1>;
+		resets = <&cru SRST_REF_PIPE_PHY2>, <&cru SRST_P_PCIE2_PHY2>;
+		reset-names = "phy", "apb";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,pipe-phy-grf = <&pipe_phy2_grf>;
+		status = "disabled";
+	};
+
+	system_sram2: sram@ff001000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0xff001000 0x0 0xef000>;
+		ranges = <0x0 0x0 0xff001000 0xef000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3588-pinctrl";
+		ranges;
+		rockchip,grf = <&ioc>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		gpio0: gpio@fd8a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfd8a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@fec20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec20000 0x0 0x100>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@fec30000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec30000 0x0 0x100>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@fec40000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec40000 0x0 0x100>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@fec50000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xfec50000 0x0 0x100>;
+			interrupts = <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+		};
+	};
+};
+
+#include "rk3588s-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
new file mode 100644
index 000000000..5c645437b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+&pinctrl {
+	/omit-if-no-ref/
+	pcfg_pull_up: pcfg-pull-up {
+		bias-pull-up;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down: pcfg-pull-down {
+		bias-pull-down;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none: pcfg-pull-none {
+		bias-disable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_0: pcfg-pull-none-drv-level-0 {
+		bias-disable;
+		drive-strength = <0>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_1: pcfg-pull-none-drv-level-1 {
+		bias-disable;
+		drive-strength = <1>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_2: pcfg-pull-none-drv-level-2 {
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_3: pcfg-pull-none-drv-level-3 {
+		bias-disable;
+		drive-strength = <3>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_4: pcfg-pull-none-drv-level-4 {
+		bias-disable;
+		drive-strength = <4>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_5: pcfg-pull-none-drv-level-5 {
+		bias-disable;
+		drive-strength = <5>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_6: pcfg-pull-none-drv-level-6 {
+		bias-disable;
+		drive-strength = <6>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_7: pcfg-pull-none-drv-level-7 {
+		bias-disable;
+		drive-strength = <7>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_8: pcfg-pull-none-drv-level-8 {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_9: pcfg-pull-none-drv-level-9 {
+		bias-disable;
+		drive-strength = <9>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_10: pcfg-pull-none-drv-level-10 {
+		bias-disable;
+		drive-strength = <10>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_11: pcfg-pull-none-drv-level-11 {
+		bias-disable;
+		drive-strength = <11>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_12: pcfg-pull-none-drv-level-12 {
+		bias-disable;
+		drive-strength = <12>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_13: pcfg-pull-none-drv-level-13 {
+		bias-disable;
+		drive-strength = <13>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_14: pcfg-pull-none-drv-level-14 {
+		bias-disable;
+		drive-strength = <14>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_15: pcfg-pull-none-drv-level-15 {
+		bias-disable;
+		drive-strength = <15>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_0: pcfg-pull-up-drv-level-0 {
+		bias-pull-up;
+		drive-strength = <0>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_1: pcfg-pull-up-drv-level-1 {
+		bias-pull-up;
+		drive-strength = <1>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_2: pcfg-pull-up-drv-level-2 {
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_3: pcfg-pull-up-drv-level-3 {
+		bias-pull-up;
+		drive-strength = <3>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_4: pcfg-pull-up-drv-level-4 {
+		bias-pull-up;
+		drive-strength = <4>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_5: pcfg-pull-up-drv-level-5 {
+		bias-pull-up;
+		drive-strength = <5>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_6: pcfg-pull-up-drv-level-6 {
+		bias-pull-up;
+		drive-strength = <6>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_7: pcfg-pull-up-drv-level-7 {
+		bias-pull-up;
+		drive-strength = <7>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_8: pcfg-pull-up-drv-level-8 {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_9: pcfg-pull-up-drv-level-9 {
+		bias-pull-up;
+		drive-strength = <9>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_10: pcfg-pull-up-drv-level-10 {
+		bias-pull-up;
+		drive-strength = <10>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_11: pcfg-pull-up-drv-level-11 {
+		bias-pull-up;
+		drive-strength = <11>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_12: pcfg-pull-up-drv-level-12 {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_13: pcfg-pull-up-drv-level-13 {
+		bias-pull-up;
+		drive-strength = <13>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_14: pcfg-pull-up-drv-level-14 {
+		bias-pull-up;
+		drive-strength = <14>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_drv_level_15: pcfg-pull-up-drv-level-15 {
+		bias-pull-up;
+		drive-strength = <15>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_0: pcfg-pull-down-drv-level-0 {
+		bias-pull-down;
+		drive-strength = <0>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_1: pcfg-pull-down-drv-level-1 {
+		bias-pull-down;
+		drive-strength = <1>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_2: pcfg-pull-down-drv-level-2 {
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_3: pcfg-pull-down-drv-level-3 {
+		bias-pull-down;
+		drive-strength = <3>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_4: pcfg-pull-down-drv-level-4 {
+		bias-pull-down;
+		drive-strength = <4>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_5: pcfg-pull-down-drv-level-5 {
+		bias-pull-down;
+		drive-strength = <5>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_6: pcfg-pull-down-drv-level-6 {
+		bias-pull-down;
+		drive-strength = <6>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_7: pcfg-pull-down-drv-level-7 {
+		bias-pull-down;
+		drive-strength = <7>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_8: pcfg-pull-down-drv-level-8 {
+		bias-pull-down;
+		drive-strength = <8>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_9: pcfg-pull-down-drv-level-9 {
+		bias-pull-down;
+		drive-strength = <9>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_10: pcfg-pull-down-drv-level-10 {
+		bias-pull-down;
+		drive-strength = <10>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_11: pcfg-pull-down-drv-level-11 {
+		bias-pull-down;
+		drive-strength = <11>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_12: pcfg-pull-down-drv-level-12 {
+		bias-pull-down;
+		drive-strength = <12>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_13: pcfg-pull-down-drv-level-13 {
+		bias-pull-down;
+		drive-strength = <13>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_14: pcfg-pull-down-drv-level-14 {
+		bias-pull-down;
+		drive-strength = <14>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_drv_level_15: pcfg-pull-down-drv-level-15 {
+		bias-pull-down;
+		drive-strength = <15>;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_up_smt: pcfg-pull-up-smt {
+		bias-pull-up;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_down_smt: pcfg-pull-down-smt {
+		bias-pull-down;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_smt: pcfg-pull-none-smt {
+		bias-disable;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_pull_none_drv_level_0_smt: pcfg-pull-none-drv-level-0-smt {
+		bias-disable;
+		drive-strength = <0>;
+		input-schmitt-enable;
+	};
+
+	/omit-if-no-ref/
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	/omit-if-no-ref/
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
new file mode 100644
index 000000000..33989a964
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ld11-global.dtb \
+	uniphier-ld11-ref.dtb \
+	uniphier-ld20-akebi96.dtb \
+	uniphier-ld20-global.dtb \
+	uniphier-ld20-ref.dtb \
+	uniphier-pxs3-ref.dtb \
+	uniphier-pxs3-ref-gadget0.dtb \
+	uniphier-pxs3-ref-gadget1.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
new file mode 100644
index 000000000..da44a15a8
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 Global Board
+//
+// Copyright (C) 2016-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+//           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld11.dtsi"
+
+/ {
+	model = "UniPhier LD11 Global Board (REF_LD11_GP)";
+	compatible = "socionext,uniphier-ld11-global",
+		     "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	dvdd_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_vcc_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "AMP_VCC";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD11";
+		widgets = "Headphone", "Headphones";
+		dais = <&i2s_port2
+			&i2s_port3
+			&i2s_port4
+			&spdif_port0
+			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2s_hpcmout1 {
+	dai-format = "i2s";
+	remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tas5707a@1d {
+		compatible = "ti,tas5711";
+		reg = <0x1d>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&dvdd_reg>;
+		DVDD-supply = <&dvdd_reg>;
+		PVDD_A-supply = <&amp_vcc_reg>;
+		PVDD_B-supply = <&amp_vcc_reg>;
+		PVDD_C-supply = <&amp_vcc_reg>;
+		PVDD_D-supply = <&amp_vcc_reg>;
+
+		port@0 {
+			tas_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_hpcmout1>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
new file mode 100644
index 000000000..414aeb99e
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 Reference Board
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld11.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD11 Reference Board";
+	compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
new file mode 100644
index 000000000..7bb36b071
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -0,0 +1,671 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD11 SoC
+//
+// Copyright (C) 2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "socionext,uniphier-ld11";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-245000000 {
+			opp-hz = /bits/ 64 <245000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-490000000 {
+			opp-hz = /bits/ 64 <490000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-653334000 {
+			opp-hz = /bits/ 64 <653334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 43 0 0>,
+				      <&pinctrl 51 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>,
+				      <&pinctrl 184 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2",
+						  "gpio_range3",
+						  "gpio_range4",
+						  "gpio_range5";
+			ngpios = <200>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-ld11-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aout1>,
+				    <&pinctrl_aoutiec1>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_pcmin2: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_line: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_line>;
+				};
+			};
+
+			i2s_port3: port@3 {
+				i2s_hpcmout1: endpoint {
+				};
+			};
+
+			i2s_port4: port@4 {
+				i2s_hp: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_hp>;
+				};
+			};
+
+			spdif_port0: port@5 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			src_port0: port@6 {
+				i2s_epcmout2: endpoint {
+				};
+			};
+
+			src_port1: port@7 {
+				i2s_epcmout3: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@8 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+		};
+
+		codec@57900000 {
+			compatible = "socionext,uniphier-evea";
+			reg = <0x57900000 0x1000>;
+			clock-names = "evea", "exiv";
+			clocks = <&sys_clk 41>, <&sys_clk 42>;
+			reset-names = "evea", "exiv", "adamv";
+			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				evea_line: endpoint {
+					remote-endpoint = <&i2s_line>;
+				};
+			};
+
+			port@1 {
+				evea_hp: endpoint {
+					remote-endpoint = <&i2s_hp>;
+				};
+			};
+		};
+
+		syscon@57920000 {
+			compatible = "socionext,uniphier-ld11-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		syscon@59810000 {
+			compatible = "socionext,uniphier-ld11-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-ld11-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-ld11-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+				 <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+			phy-names = "usb";
+			phys = <&usb_phy0>;
+			has-transaction-translator;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+				 <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+			phy-names = "usb";
+			phys = <&usb_phy1>;
+			has-transaction-translator;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+				 <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+			phy-names = "usb";
+			phys = <&usb_phy2>;
+			has-transaction-translator;
+		};
+
+		syscon@5b3e0000 {
+			compatible = "socionext,uniphier-ld11-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x5b3e0000 0x800>;
+
+			mio_clk: clock-controller {
+				compatible = "socionext,uniphier-ld11-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-mio-reset";
+				#reset-cells = <1>;
+				resets = <&sys_rst 7>;
+			};
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-ld11-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld11-pinctrl";
+			};
+
+			usb-hub {
+				compatible = "socionext,uniphier-ld11-usb2-phy";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb_phy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <0>;
+				};
+
+				usb_phy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-ld11-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-ld11-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe40000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-ld11-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-ld11-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-ld11-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-ld11-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "internal";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
+
+&pinctrl_aoutiec1 {
+	drive-strength = <4>;	/* default: 4mA */
+
+	ao1arc {
+		pins = "AO1ARC";
+		drive-strength = <8>;	/* 8mA */
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
new file mode 100644
index 000000000..fba454ada
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for Akebi96 Development Board
+//
+// Derived from uniphier-ld20-global.dts.
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+// Copyright (C) 2019-2020 Linaro Ltd.
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld20.dtsi"
+
+/ {
+	model = "Akebi96";
+	compatible = "socionext,uniphier-ld20-akebi96",
+		     "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	framebuffer@c0000000 {
+		compatible = "simple-framebuffer";
+		reg = <0 0xc0000000 0 0x02000000>;
+		width = <1920>;
+		height = <1080>;
+		stride = <7680>;
+		format = "a8r8g8b8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		memory@c0000000 {
+			reg = <0 0xc0000000 0 0x02000000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD20";
+		dais = <&spdif_port0
+			&comp_spdif_port0>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&spi3 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-over-spi@0 {
+		compatible = "maxim,max3421-udc";
+		reg = <0>;
+		spi-max-frequency = <12500000>;
+		interrupt-parent = <&gpio>;
+		interrupt-names = "udc";
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&serial0 {
+	/* Onboard USB-UART */
+	status = "okay";
+};
+
+&serial2 {
+	/* LS connector UART1 */
+	status = "okay";
+};
+
+&serial3 {
+	/* LS connector UART0 */
+	status = "okay";
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	/* LS connector I2C0 */
+	status = "okay";
+};
+
+&i2c1 {
+	/* LS connector I2C1 */
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&gpio {
+	/* IRQs for Max3421 */
+	xirq0-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 1>;
+		input;
+	};
+	xirq10-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(10) 1>;
+		input;
+	};
+};
+
+&pinctrl_aout1 {
+	groups = "aout1b";
+};
+
+&pinctrl_uart3 {
+	groups = "uart3", "uart3_ctsrts";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
new file mode 100644
index 000000000..a01579cb3
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Global Board
+//
+// Copyright (C) 2015-2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+//           Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include "uniphier-ld20.dtsi"
+
+/ {
+	model = "UniPhier LD20 Global Board (REF_LD20_GP)";
+	compatible = "socionext,uniphier-ld20-global",
+		     "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	dvdd_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "DVDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	amp_vcc_reg: reg-fixed {
+		compatible = "regulator-fixed";
+		regulator-name = "AMP_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "UniPhier LD20";
+		widgets = "Headphone", "Headphones";
+		dais = <&i2s_port2
+			&i2s_port3
+			&i2s_port4
+			&spdif_port0
+			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
+	};
+
+	spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			spdif_tx: endpoint {
+				remote-endpoint = <&spdif_hiecout1>;
+			};
+		};
+	};
+
+	comp-spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+
+		port@0 {
+			comp_spdif_tx: endpoint {
+				remote-endpoint = <&comp_spdif_hiecout1>;
+			};
+		};
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2s_hpcmout1 {
+	dai-format = "i2s";
+	remote-endpoint = <&tas_speaker>;
+};
+
+&spdif_hiecout1 {
+	remote-endpoint = <&spdif_tx>;
+};
+
+&comp_spdif_hiecout1 {
+	remote-endpoint = <&comp_spdif_tx>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tas5707@1b {
+		compatible = "ti,tas5711";
+		reg = <0x1b>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>;
+		pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&dvdd_reg>;
+		DVDD-supply = <&dvdd_reg>;
+		PVDD_A-supply = <&amp_vcc_reg>;
+		PVDD_B-supply = <&amp_vcc_reg>;
+		PVDD_C-supply = <&amp_vcc_reg>;
+		PVDD_D-supply = <&amp_vcc_reg>;
+
+		port@0 {
+			tas_speaker: endpoint {
+				dai-format = "i2s";
+				remote-endpoint = <&i2s_hpcmout1>;
+			};
+		};
+	};
+};
+
+&eth {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_ether_rmii>;
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
new file mode 100644
index 000000000..a5f2083f8
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 Reference Board
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-ld20.dtsi"
+#include "uniphier-ref-daughter.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier LD20 Reference Board";
+	compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		ethernet0 = &eth;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&gpio {
+	xirq0-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+	phy-handle = <&ethphy>;
+};
+
+&mdio {
+	ethphy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+		       "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+		drive-strength = <9>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
new file mode 100644
index 000000000..4e2171630
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -0,0 +1,999 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier LD20 SoC
+//
+// Copyright (C) 2015-2016 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-ld20";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&a72_l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			next-level-cache = <&a72_l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x100>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&a53_l2>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x101>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&a53_l2>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+		};
+
+		a72_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		a53_l2: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	cluster1_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		spi2: spi@54006200 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2>;
+			clocks = <&peri_clk 13>;
+			resets = <&peri_rst 13>;
+		};
+
+		spi3: spi@54006300 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006300 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3>;
+			clocks = <&peri_clk 14>;
+			resets = <&peri_rst 14>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 96 0 0>,
+				      <&pinctrl 160 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <205>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		audio@56000000 {
+			compatible = "socionext,uniphier-ld20-aio";
+			reg = <0x56000000 0x80000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aout1>,
+				    <&pinctrl_aoutiec1>;
+			clock-names = "aio";
+			clocks = <&sys_clk 40>;
+			reset-names = "aio";
+			resets = <&sys_rst 40>;
+			#sound-dai-cells = <1>;
+			socionext,syscon = <&soc_glue>;
+
+			i2s_port0: port@0 {
+				i2s_hdmi: endpoint {
+				};
+			};
+
+			i2s_port1: port@1 {
+				i2s_pcmin2: endpoint {
+				};
+			};
+
+			i2s_port2: port@2 {
+				i2s_line: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_line>;
+				};
+			};
+
+			i2s_port3: port@3 {
+				i2s_hpcmout1: endpoint {
+				};
+			};
+
+			i2s_port4: port@4 {
+				i2s_hp: endpoint {
+					dai-format = "i2s";
+					remote-endpoint = <&evea_hp>;
+				};
+			};
+
+			spdif_port0: port@5 {
+				spdif_hiecout1: endpoint {
+				};
+			};
+
+			src_port0: port@6 {
+				i2s_epcmout2: endpoint {
+				};
+			};
+
+			src_port1: port@7 {
+				i2s_epcmout3: endpoint {
+				};
+			};
+
+			comp_spdif_port0: port@8 {
+				comp_spdif_hiecout1: endpoint {
+				};
+			};
+		};
+
+		codec@57900000 {
+			compatible = "socionext,uniphier-evea";
+			reg = <0x57900000 0x1000>;
+			clock-names = "evea", "exiv";
+			clocks = <&sys_clk 41>, <&sys_clk 42>;
+			reset-names = "evea", "exiv", "adamv";
+			resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
+			#sound-dai-cells = <1>;
+
+			port@0 {
+				evea_line: endpoint {
+					remote-endpoint = <&i2s_line>;
+				};
+			};
+
+			port@1 {
+				evea_hp: endpoint {
+					remote-endpoint = <&i2s_hp>;
+				};
+			};
+		};
+
+		syscon@57920000 {
+			compatible = "socionext,uniphier-ld20-adamv",
+				     "simple-mfd", "syscon";
+			reg = <0x57920000 0x1000>;
+
+			adamv_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-adamv-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
+			clocks = <&peri_clk 8>;
+			resets = <&peri_rst 8>;
+			clock-frequency = <100000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 9>;
+			resets = <&peri_rst 9>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl: syscon@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock-controller {
+				compatible = "socionext,uniphier-ld20-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-ld20-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-ld20-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-ld20-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld20-pinctrl";
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-ld20-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-ld20-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-ld20-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-ld20-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-ld20-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+
+			pvtctl: thermal-sensor {
+				compatible = "socionext,uniphier-ld20-thermal";
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
+		};
+
+		eth: ethernet@65000000 {
+			compatible = "socionext,uniphier-ld20-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		usb: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "host";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+				    <&pinctrl_usb2>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+			resets = <&usb_rst 15>;
+			phys = <&usb_hsphy0>, <&usb_hsphy1>,
+			       <&usb_hsphy2>, <&usb_hsphy3>,
+			       <&usb_ssphy0>, <&usb_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65b00000 {
+			compatible = "socionext,uniphier-ld20-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-ld20-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus2: regulator@120 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x120 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_vbus3: regulator@130 {
+				compatible = "socionext,uniphier-ld20-usb3-regulator";
+				reg = <0x130 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 14>;
+				reset-names = "link";
+				resets = <&sys_rst 14>;
+			};
+
+			usb_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 16>;
+				vbus-supply = <&usb_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb_hsphy2: phy@220 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x220 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus2>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_hsphy3: phy@230 {
+				compatible = "socionext,uniphier-ld20-usb3-hsphy";
+				reg = <0x230 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 17>;
+				vbus-supply = <&usb_vbus3>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 18>;
+				vbus-supply = <&usb_vbus0>;
+			};
+
+			usb_ssphy1: phy@310 {
+				compatible = "socionext,uniphier-ld20-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 14>, <&sys_clk 19>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 14>, <&sys_rst 19>;
+				vbus-supply = <&usb_vbus1>;
+			};
+		};
+
+		pcie: pcie@66000000 {
+			compatible = "socionext,uniphier-pcie";
+			status = "disabled";
+			reg-names = "dbi", "link", "config";
+			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+			      <0x2fff0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&sys_clk 24>;
+			resets = <&sys_rst 24>;
+			num-lanes = <1>;
+			num-viewport = <1>;
+			bus-range = <0x0 0xff>;
+			device_type = "pci";
+			ranges =
+			/* downstream I/O */
+				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+			/* non-prefetchable memory */
+				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
+			#interrupt-cells = <1>;
+			interrupt-names = "dma", "msi";
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
+					<0 0 0 2 &pcie_intc 1>,	/* INTB */
+					<0 0 0 3 &pcie_intc 2>,	/* INTC */
+					<0 0 0 4 &pcie_intc 3>;	/* INTD */
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-ld20-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "link";
+			clocks = <&sys_clk 24>;
+			reset-names = "link";
+			resets = <&sys_rst 24>;
+			socionext,syscon = <&soc_glue>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
+
+&pinctrl_aout1 {
+	drive-strength = <4>;	/* default: 3.5mA */
+
+	ao1dacck {
+		pins = "AO1DACCK";
+		drive-strength = <5>;	/* 5mA */
+	};
+};
+
+&pinctrl_aoutiec1 {
+	drive-strength = <4>;	/* default: 3.5mA */
+
+	ao1arc {
+		pins = "AO1ARC";
+		drive-strength = <11>;	/* 11mA */
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
new file mode 100644
index 000000000..3e1132204
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -0,0 +1 @@
+#include <arm/socionext/uniphier-pinctrl.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
new file mode 100644
index 000000000..99136adb1
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget0.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #0)
+//
+// Copyright (C) 2021 Socionext Inc.
+//   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+	model = "UniPhier PXs3 Reference Board (USB-Device #0)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+	status = "disabled";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	pinctrl-0 = <&pinctrl_usb0_device>;
+	snps,dis_enblslpm_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,usb2-gadget-lpm-disable;
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
+};
+
+&usb0_hsphy0 {
+	/delete-property/ vbus-supply;
+};
+
+&usb0_ssphy0 {
+	/delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb0_hsphy1;
+/delete-node/ &usb0_ssphy1;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
new file mode 100644
index 000000000..4c960f455
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref-gadget1.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board (for USB-Device #1)
+//
+// Copyright (C) 2021 Socionext Inc.
+//   Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3-ref.dts"
+
+/ {
+	model = "UniPhier PXs3 Reference Board (USB-Device #1)";
+};
+
+/* I2C3 pinctrl is shared with USB*VBUSIN */
+&i2c3 {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "peripheral";
+	pinctrl-0 = <&pinctrl_usb1_device>;
+	snps,dis_enblslpm_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,usb2-gadget-lpm-disable;
+	phy-names = "usb2-phy", "usb3-phy";
+	phys = <&usb1_hsphy0>, <&usb1_ssphy0>;
+};
+
+&usb1_hsphy0 {
+	/delete-property/ vbus-supply;
+};
+
+&usb1_ssphy0 {
+	/delete-property/ vbus-supply;
+};
+
+/delete-node/ &usb1_hsphy1;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
new file mode 100644
index 000000000..1ced6190a
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs3 Reference Board
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+/dts-v1/;
+#include "uniphier-pxs3.dtsi"
+#include "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PXs3 Reference Board";
+	compatible = "socionext,uniphier-pxs3-ref", "socionext,uniphier-pxs3";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serialsc;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c6 = &i2c6;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xa0000000>;
+	};
+};
+
+&ethsc {
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&serialsc {
+	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq4-hog {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
+		input;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&sd {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&ethphy0>;
+};
+
+&mdio0 {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	phy-handle = <&ethphy1>;
+};
+
+&mdio1 {
+	ethphy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&pinctrl_ether_rgmii {
+	tx {
+		pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
+		       "RGMII0_TXD2", "RGMII0_TXD3", "RGMII0_TXCTL";
+		drive-strength = <9>;
+	};
+};
+
+&pinctrl_ether1_rgmii {
+	tx {
+		pins = "RGMII1_TXCLK", "RGMII1_TXD0", "RGMII1_TXD1",
+		       "RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_TXCTL";
+		drive-strength = <9>;
+	};
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
new file mode 100644
index 000000000..38ccfb46e
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -0,0 +1,957 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Device Tree Source for UniPhier PXs3 SoC
+//
+// Copyright (C) 2017 Socionext Inc.
+//   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "socionext,uniphier-pxs3";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x001>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x002>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0x003>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	cluster0_opp: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-325000000 {
+			opp-hz = /bits/ 64 <325000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-650000000 {
+			opp-hz = /bits/ 64 <650000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-866667000 {
+			opp-hz = /bits/ 64 <866667000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure-memory@81000000 {
+			reg = <0x0 0x81000000 0x0 0x01000000>;
+			no-map;
+		};
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		spi0: spi@54006000 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi0>;
+			clocks = <&peri_clk 11>;
+			resets = <&peri_rst 11>;
+		};
+
+		spi1: spi@54006100 {
+			compatible = "socionext,uniphier-scssi";
+			status = "disabled";
+			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			resets = <&peri_rst 0>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			resets = <&peri_rst 1>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			resets = <&peri_rst 2>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			resets = <&peri_rst 3>;
+		};
+
+		gpio: gpio@55000000 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000000 0x200>;
+			interrupt-parent = <&aidet>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 0>,
+				      <&pinctrl 104 0 0>,
+				      <&pinctrl 168 0 0>;
+			gpio-ranges-group-names = "gpio_range0",
+						  "gpio_range1",
+						  "gpio_range2";
+			ngpios = <286>;
+			socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+						     <21 217 3>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			resets = <&peri_rst 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			resets = <&peri_rst 5>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			resets = <&peri_rst 6>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			resets = <&peri_rst 7>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for HDMI */
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&peri_clk 10>;
+			resets = <&peri_rst 10>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59801000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		sdctrl: syscon@59810000 {
+			compatible = "socionext,uniphier-pxs3-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs3-sd-clock";
+				#clock-cells = <1>;
+			};
+
+			sd_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs3-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		syscon@59820000 {
+			compatible = "socionext,uniphier-pxs3-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs3-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs3-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		emmc: mmc@5a000000 {
+			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc>;
+			clocks = <&sys_clk 4>;
+			resets = <&sys_rst 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-pwrseq = <&emmc_pwrseq>;
+			cdns,phy-input-delay-legacy = <9>;
+			cdns,phy-input-delay-mmc-highspeed = <2>;
+			cdns,phy-input-delay-mmc-ddr = <3>;
+			cdns,phy-dll-delay-sdclk = <21>;
+			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
+		};
+
+		sd: mmc@5a400000 {
+			compatible = "socionext,uniphier-sd-v3.1.1";
+			status = "disabled";
+			reg = <0x5a400000 0x800>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default", "uhs";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_uhs>;
+			clocks = <&sd_clk 0>;
+			reset-names = "host";
+			resets = <&sd_rst 0>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			socionext,syscon-uhs-mode = <&sdctrl 0>;
+		};
+
+		soc_glue: syscon@5f800000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-pxs3-pinctrl";
+			};
+		};
+
+		syscon@5f900000 {
+			compatible = "socionext,uniphier-pxs3-soc-glue-debug",
+				     "simple-mfd", "syscon";
+			reg = <0x5f900000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x5f900000 0x2000>;
+
+			efuse@100 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x100 0x28>;
+			};
+
+			efuse@200 {
+				compatible = "socionext,uniphier-efuse";
+				reg = <0x200 0x68>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* USB cells */
+				usb_rterm0: trim@54,4 {
+					reg = <0x54 1>;
+					bits = <4 2>;
+				};
+				usb_rterm1: trim@55,4 {
+					reg = <0x55 1>;
+					bits = <4 2>;
+				};
+				usb_rterm2: trim@58,4 {
+					reg = <0x58 1>;
+					bits = <4 2>;
+				};
+				usb_rterm3: trim@59,4 {
+					reg = <0x59 1>;
+					bits = <4 2>;
+				};
+				usb_sel_t0: trim@54,0 {
+					reg = <0x54 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t1: trim@55,0 {
+					reg = <0x55 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t2: trim@58,0 {
+					reg = <0x58 1>;
+					bits = <0 4>;
+				};
+				usb_sel_t3: trim@59,0 {
+					reg = <0x59 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i0: trim@56,0 {
+					reg = <0x56 1>;
+					bits = <0 4>;
+				};
+				usb_hs_i2: trim@5a,0 {
+					reg = <0x5a 1>;
+					bits = <0 4>;
+				};
+			};
+		};
+
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
+		aidet: interrupt-controller@5fc20000 {
+			compatible = "socionext,uniphier-pxs3-aidet";
+			reg = <0x5fc20000 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscon@61840000 {
+			compatible = "socionext,uniphier-pxs3-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock-controller {
+				compatible = "socionext,uniphier-pxs3-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset-controller {
+				compatible = "socionext,uniphier-pxs3-reset";
+				#reset-cells = <1>;
+			};
+
+			watchdog {
+				compatible = "socionext,uniphier-wdt";
+			};
+
+			pvtctl: thermal-sensor {
+				compatible = "socionext,uniphier-pxs3-thermal";
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
+		};
+
+		eth0: ethernet@65000000 {
+			compatible = "socionext,uniphier-pxs3-ave4";
+			status = "disabled";
+			reg = <0x65000000 0x8500>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 6>;
+			reset-names = "ether";
+			resets = <&sys_rst 6>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 0>;
+
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		eth1: ethernet@65200000 {
+			compatible = "socionext,uniphier-pxs3-ave4";
+			status = "disabled";
+			reg = <0x65200000 0x8500>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_ether1_rgmii>;
+			clock-names = "ether";
+			clocks = <&sys_clk 7>;
+			reset-names = "ether";
+			resets = <&sys_rst 7>;
+			phy-mode = "rgmii-id";
+			local-mac-address = [00 00 00 00 00 00];
+			socionext,syscon-phy-mode = <&soc_glue 1>;
+
+			mdio1: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		ahci0: sata@65600000 {
+			compatible = "socionext,uniphier-pxs3-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65600000 0x10000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 28>;
+			resets = <&sys_rst 28>, <&ahci0_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci0_phy>;
+		};
+
+		sata-controller@65700000 {
+			compatible = "socionext,uniphier-pxs3-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65700000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65700000 0x100>;
+
+			ahci0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 28>;
+				reset-names = "link";
+				resets = <&sys_rst 28>;
+				#reset-cells = <1>;
+			};
+
+			ahci0_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pxs3-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 28>, <&sys_clk 30>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 28>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
+		ahci1: sata@65800000 {
+			compatible = "socionext,uniphier-pxs3-ahci",
+				     "generic-ahci";
+			status = "disabled";
+			reg = <0x65800000 0x10000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clk 29>;
+			resets = <&sys_rst 29>, <&ahci1_rst 0>;
+			ports-implemented = <1>;
+			phys = <&ahci1_phy>;
+		};
+
+		sata-controller@65900000 {
+			compatible = "socionext,uniphier-pxs3-ahci-glue",
+				     "simple-mfd";
+			reg = <0x65900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65900000 0x100>;
+
+			ahci1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-ahci-reset";
+				reg = <0x0 0x4>;
+				clock-names = "link";
+				clocks = <&sys_clk 29>;
+				reset-names = "link";
+				resets = <&sys_rst 29>;
+				#reset-cells = <1>;
+			};
+
+			ahci1_phy: sata-phy@10 {
+				compatible = "socionext,uniphier-pxs3-ahci-phy";
+				reg = <0x10 0x10>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 29>, <&sys_clk 30>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 29>, <&sys_rst 30>;
+				#phy-cells = <0>;
+			};
+		};
+
+		usb0: usb@65a00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65a00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+			resets = <&usb0_rst 15>;
+			phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+			       <&usb0_ssphy0>, <&usb0_ssphy1>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65b00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65b00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65b00000 0x400>;
+
+			usb0_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 12>;
+				reset-names = "link";
+				resets = <&sys_rst 12>;
+			};
+
+			usb0_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 16>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 16>;
+				vbus-supply = <&usb0_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+					      <&usb_hs_i0>;
+			};
+
+			usb0_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 17>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 17>;
+				vbus-supply = <&usb0_vbus0>;
+			};
+
+			usb0_ssphy1: phy@310 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x310 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy";
+				clocks = <&sys_clk 12>, <&sys_clk 18>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 12>, <&sys_rst 18>;
+				vbus-supply = <&usb0_vbus1>;
+			};
+		};
+
+		usb1: usb@65c00000 {
+			compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+			status = "disabled";
+			reg = <0x65c00000 0xcd00>;
+			interrupt-names = "dwc_usb3";
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+			clock-names = "ref", "bus_early", "suspend";
+			clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+			resets = <&usb1_rst 15>;
+			phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+			       <&usb1_ssphy0>;
+			dr_mode = "host";
+		};
+
+		usb-controller@65d00000 {
+			compatible = "socionext,uniphier-pxs3-dwc3-glue",
+				     "simple-mfd";
+			reg = <0x65d00000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x65d00000 0x400>;
+
+			usb1_rst: reset-controller@0 {
+				compatible = "socionext,uniphier-pxs3-usb3-reset";
+				reg = <0x0 0x4>;
+				#reset-cells = <1>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus0: regulator@100 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x100 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_vbus1: regulator@110 {
+				compatible = "socionext,uniphier-pxs3-usb3-regulator";
+				reg = <0x110 0x10>;
+				clock-names = "link";
+				clocks = <&sys_clk 13>;
+				reset-names = "link";
+				resets = <&sys_rst 13>;
+			};
+
+			usb1_hsphy0: phy@200 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x200 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus0>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_hsphy1: phy@210 {
+				compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+				reg = <0x210 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 20>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 20>;
+				vbus-supply = <&usb1_vbus1>;
+				nvmem-cell-names = "rterm", "sel_t", "hs_i";
+				nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+					      <&usb_hs_i2>;
+			};
+
+			usb1_ssphy0: phy@300 {
+				compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+				reg = <0x300 0x10>;
+				#phy-cells = <0>;
+				clock-names = "link", "phy", "phy-ext";
+				clocks = <&sys_clk 13>, <&sys_clk 21>,
+					 <&sys_clk 14>;
+				reset-names = "link", "phy";
+				resets = <&sys_rst 13>, <&sys_rst 21>;
+				vbus-supply = <&usb1_vbus0>;
+			};
+		};
+
+		pcie: pcie@66000000 {
+			compatible = "socionext,uniphier-pcie";
+			status = "disabled";
+			reg-names = "dbi", "link", "config";
+			reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+			      <0x2fff0000 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			clocks = <&sys_clk 24>;
+			resets = <&sys_rst 24>;
+			num-lanes = <1>;
+			num-viewport = <1>;
+			bus-range = <0x0 0xff>;
+			device_type = "pci";
+			ranges =
+			/* downstream I/O */
+				<0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+			/* non-prefetchable memory */
+				<0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>;
+			#interrupt-cells = <1>;
+			interrupt-names = "dma", "msi";
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,	/* INTA */
+					<0 0 0 2 &pcie_intc 1>,	/* INTB */
+					<0 0 0 3 &pcie_intc 2>,	/* INTC */
+					<0 0 0 4 &pcie_intc 3>;	/* INTD */
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-pxs3-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "link";
+			clocks = <&sys_clk 24>;
+			reset-names = "link";
+			resets = <&sys_rst 24>;
+			socionext,syscon = <&soc_glue>;
+		};
+
+		nand: nand-controller@68000000 {
+			compatible = "socionext,uniphier-denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
+			reset-names = "nand", "reg";
+			resets = <&sys_rst 2>, <&sys_rst 2>;
+		};
+	};
+};
+
+#include "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
new file mode 100644
index 000000000..8afbe5ce4
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ref-daughter.dtsi
@@ -0,0 +1 @@
+#include <arm/socionext/uniphier-ref-daughter.dtsi>
diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
new file mode 100644
index 000000000..6d0e3226a
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
@@ -0,0 +1 @@
+#include <arm/socionext/uniphier-support-card.dtsi>
diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
new file mode 100644
index 000000000..97522fb0b
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
+			sp9860g-1h10.dtb	\
+			sp9863a-1h10.dtb	\
+			ums512-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
new file mode 100644
index 000000000..e15409f55
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -0,0 +1,258 @@
+/*
+ * Spreadtrum SC2731 PMIC dts file
+ *
+ * Copyright (C) 2018, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+&adi_bus {
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		charger@0 {
+			compatible = "sprd,sc2731-charger";
+			reg = <0x0>;
+			monitored-battery = <&bat>;
+		};
+
+		led-controller@200 {
+			compatible = "sprd,sc2731-bltc";
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				label = "red";
+				reg = <0x0>;
+			};
+
+			led@1 {
+				label = "green";
+				reg = <0x1>;
+			};
+
+			led@2 {
+				label = "blue";
+				reg = <0x2>;
+			};
+		};
+
+		rtc@280 {
+			compatible = "sprd,sc2731-rtc";
+			reg = <0x280>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <2>;
+		};
+
+		pmic_eic: gpio@300 {
+			compatible = "sprd,sc2731-eic";
+			reg = <0x300>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <5>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		efuse@380 {
+			compatible = "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+
+			fgu_calib: calib@6 {
+				reg = <0x6 0x2>;
+				bits = <0 9>;
+			};
+
+			adc_big_scale: calib@24 {
+				reg = <0x24 0x2>;
+			};
+
+			adc_small_scale: calib@26 {
+				reg = <0x26 0x2>;
+			};
+		};
+
+		pmic_adc: adc@480 {
+			compatible = "sprd,sc2731-adc";
+			reg = <0x480>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <0>;
+			#io-channel-cells = <1>;
+			hwlocks = <&hwlock 4>;
+			nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+			nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
+		};
+
+		fgu@a00 {
+			compatible = "sprd,sc2731-fgu";
+			reg = <0xa00>;
+			bat-detect-gpio = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+			io-channels = <&pmic_adc 3>, <&pmic_adc 6>;
+			io-channel-names = "bat-temp", "charge-vol";
+			monitored-battery = <&bat>;
+			nvmem-cell-names = "fgu_calib";
+			nvmem-cells = <&fgu_calib>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <4>;
+		};
+
+		vibrator@ec8 {
+			compatible = "sprd,sc2731-vibrator";
+			reg = <0xec8>;
+		};
+
+		regulators {
+			compatible = "sprd,sc2731-regulator";
+
+			vddarm0: BUCK_CPU0 {
+				regulator-name = "vddarm0";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddarm1: BUCK_CPU1 {
+				regulator-name = "vddarm1";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1996875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			dcdcrf: BUCK_RF {
+				regulator-name = "dcdcrf";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2196875>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-always-on;
+			};
+
+			vddcama0: LDO_CAMA0 {
+				regulator-name = "vddcama0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+			};
+
+			vddcama1: LDO_CAMA1 {
+				regulator-name = "vddcama1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcammot: LDO_CAMMOT {
+				regulator-name = "vddcammot";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddvldo: LDO_VLDO {
+				regulator-name = "vddvldo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddemmccore: LDO_EMMCCORE {
+				regulator-name = "vddemmccore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-boot-on;
+			};
+
+			vddsdcore: LDO_SDCORE {
+				regulator-name = "vddsdcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsdio: LDO_SDIO {
+				regulator-name = "vddsdio";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddwifipa: LDO_WIFIPA {
+				regulator-name = "vddwifipa";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddusb33: LDO_USB33 {
+				regulator-name = "vddusb33";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd0: LDO_CAMD0 {
+				regulator-name = "vddcamd0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd1: LDO_CAMD1 {
+				regulator-name = "vddcamd1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcon: LDO_CON {
+				regulator-name = "vddcon";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamio: LDO_CAMIO {
+				regulator-name = "vddcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsram: LDO_SRAM {
+				regulator-name = "vddsram";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1793750>;
+				regulator-enable-ramp-delay = <100>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
new file mode 100644
index 000000000..e5657c35c
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts
@@ -0,0 +1,49 @@
+/*
+ * Spreadtrum SC9836 openphone board DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+/dts-v1/;
+
+#include "sc9836.dtsi"
+
+/ {
+	model = "Spreadtrum SC9836 Openphone Board";
+
+	compatible = "sprd,sc9836-openphone", "sprd,sc9836";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x20000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
new file mode 100644
index 000000000..8bb8a7096
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -0,0 +1,224 @@
+/*
+ * Spreadtrum SC9836 SoC DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+#include "sharkl64.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "sprd,sc9836";
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	etf@10003000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0 0x10003000 0 0x1000>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etf_in: endpoint {
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@10001000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0x10001000 0 0x1000>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					remote-endpoint = <&etm0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					remote-endpoint = <&etm1_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					remote-endpoint = <&etm2_out>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel_in_port3: endpoint {
+					remote-endpoint = <&etm3_out>;
+				};
+			};
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					remote-endpoint = <&stm_out>;
+				};
+			};
+			/* Other input ports aren't connected to anyone */
+		};
+	};
+
+	etm@10440000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10440000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm0_out: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+	};
+
+	etm@10540000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10540000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm1_out: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+	};
+
+	etm@10640000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10640000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm2_out: endpoint {
+					remote-endpoint = <&funnel_in_port2>;
+				};
+			};
+		};
+	};
+
+	etm@10740000 {
+		compatible = "arm,coresight-etm4x", "arm,primecell";
+		reg = <0 0x10740000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				etm3_out: endpoint {
+					remote-endpoint = <&funnel_in_port3>;
+				};
+			};
+		};
+	};
+
+	stm@10006000 {
+		compatible = "arm,coresight-stm", "arm,primecell";
+		reg = <0 0x10006000 0 0x1000>,
+		      <0 0x01000000 0 0x180000>;
+		reg-names = "stm-base", "stm-stimulus-base";
+		clocks = <&clk26mhz>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				stm_out: endpoint {
+					remote-endpoint = <&funnel_in_port4>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_on = <0xc4000003>;
+		cpu_off = <0x84000002>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
new file mode 100644
index 000000000..e27eb3ed1
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -0,0 +1,716 @@
+/*
+ * Spreadtrum SC9860 SoC
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "whale2.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@530000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530000>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU1: cpu@530001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530001>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU2: cpu@530002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530002>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU3: cpu@530003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530003>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU4: cpu@530100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU5: cpu@530101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530101>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU6: cpu@530102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530102>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+
+		CPU7: cpu@530103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x530103>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
+		};
+	};
+
+	idle-states{
+		entry-method = "psci";
+
+		CORE_PD: core_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <700>;
+			min-residency-us = <2500>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010002>;
+		};
+
+		CLUSTER_PD: cluster_pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <1000>;
+			min-residency-us = <3000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x01010003>;
+		};
+	};
+
+	gic: interrupt-controller@12001000 {
+		compatible = "arm,gic-400";
+		reg = <0 0x12001000 0 0x1000>,
+		      <0 0x12002000 0 0x2000>,
+		      <0 0x12004000 0 0x2000>,
+		      <0 0x12006000 0 0x2000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
+					| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
+					 | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>,
+				     <&CPU1>,
+				     <&CPU2>,
+				     <&CPU3>,
+				     <&CPU4>,
+				     <&CPU5>,
+				     <&CPU6>,
+				     <&CPU7>;
+	};
+
+	soc {
+		pmu_gate: pmu-gate {
+			compatible = "sprd,sc9860-pmu-gate";
+			sprd,syscon = <&pmu_regs>; /* 0x402b0000 */
+			clocks = <&ext_26m>;
+			#clock-cells = <1>;
+		};
+
+		pll: pll {
+			compatible = "sprd,sc9860-pll";
+			sprd,syscon = <&ana_regs>; /* 0x40400000 */
+			clocks = <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		ap_clk: clock-controller@20000000 {
+			compatible = "sprd,sc9860-ap-clk";
+			reg = <0 0x20000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_prediv: aon-prediv {
+			compatible = "sprd,sc9860-aon-prediv";
+			reg = <0 0x402d0000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>,
+				 <&pmu_gate 0>;
+			#clock-cells = <1>;
+		};
+
+		apahb_gate: apahb-gate {
+			compatible = "sprd,sc9860-apahb-gate";
+			sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aon_gate: aon-gate {
+			compatible = "sprd,sc9860-aon-gate";
+			sprd,syscon = <&aon_regs>; /* 0x402e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		aonsecure_clk: clock-controller@40880000 {
+			compatible = "sprd,sc9860-aonsecure-clk";
+			reg = <0 0x40880000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		agcp_gate: agcp-gate {
+			compatible = "sprd,sc9860-agcp-gate";
+			sprd,syscon = <&agcp_regs>; /* 0x415e0000 */
+			clocks = <&aon_prediv 0>;
+			#clock-cells = <1>;
+		};
+
+		gpu_clk: clock-controller@60200000 {
+			compatible = "sprd,sc9860-gpu-clk";
+			reg = <0 0x60200000 0 0x400>;
+			clocks = <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_clk: clock-controller@61000000 {
+			compatible = "sprd,sc9860-vsp-clk";
+			reg = <0 0x61000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		vsp_gate: vsp-gate {
+			compatible = "sprd,sc9860-vsp-gate";
+			sprd,syscon = <&vsp_regs>; /* 0x61100000 */
+			clocks = <&vsp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_clk: clock-controller@62000000 {
+			compatible = "sprd,sc9860-cam-clk";
+			reg = <0 0x62000000 0 0x4000>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		cam_gate: cam-gate {
+			compatible = "sprd,sc9860-cam-gate";
+			sprd,syscon = <&cam_regs>; /* 0x62100000 */
+			clocks = <&cam_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_clk: clock-controller@63000000 {
+			compatible = "sprd,sc9860-disp-clk";
+			reg = <0 0x63000000 0 0x400>;
+			clocks = <&ext_26m>, <&pll 0>;
+			#clock-cells = <1>;
+		};
+
+		disp_gate: disp-gate {
+			compatible = "sprd,sc9860-disp-gate";
+			sprd,syscon = <&disp_regs>; /* 0x63100000 */
+			clocks = <&disp_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		apapb_gate: apapb-gate {
+			compatible = "sprd,sc9860-apapb-gate";
+			sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */
+			clocks = <&ap_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		funnel@10001000 { /* SoC Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					soc_funnel_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					soc_funnel_in_port0: endpoint {
+						remote-endpoint =
+						<&main_funnel_out_port>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					soc_funnel_in_port1: endpoint {
+						remote-endpoint =
+							<&stm_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+							<&soc_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		stm@10006000 {
+			compatible = "arm,coresight-stm", "arm,primecell";
+			reg = <0 0x10006000 0 0x1000>,
+			      <0 0x01000000 0 0x180000>;
+			reg-names = "stm-base", "stm-stimulus-base";
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					stm_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		funnel@11001000 { /* Cluster0 Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster0_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster0_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster0_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster0_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@4 {
+					reg = <4>;
+					cluster0_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		funnel@11002000 { /* Cluster1 Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+			out-ports {
+				port {
+					cluster1_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					cluster1_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					cluster1_funnel_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					cluster1_funnel_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					cluster1_funnel_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etf@11003000 { /*  ETF on Cluster0 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster0_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					cluster0_etf_in: endpoint {
+						remote-endpoint =
+						<&cluster0_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@11004000 { /* ETF on Cluster1 */
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x11004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					cluster1_etf_out: endpoint {
+						remote-endpoint =
+						<&main_funnel_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					cluster1_etf_in: endpoint {
+						remote-endpoint =
+						<&cluster1_funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@11005000 { /* Main Funnel */
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x11005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					main_funnel_out_port: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in_port0>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					main_funnel_in_port0: endpoint {
+						remote-endpoint =
+							<&cluster0_etf_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					main_funnel_in_port1: endpoint {
+						remote-endpoint =
+							<&cluster1_etf_out>;
+					};
+				};
+			};
+		};
+
+		etm@11440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11440000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@11540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11540000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@11640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11640000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@11740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11740000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+							<&cluster0_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@11840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11840000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@11940000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11940000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@11a40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11a40000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@11b40000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x11b40000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+							<&cluster1_funnel_in_port3>;
+					};
+				};
+			};
+		};
+
+		gpio-keys {
+			compatible = "gpio-keys";
+
+			key-volumedown {
+				label = "Volume Down Key";
+				linux,code = <KEY_VOLUMEDOWN>;
+				gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+
+			key-volumeup {
+				label = "Volume Up Key";
+				linux,code = <KEY_VOLUMEUP>;
+				gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+
+			key-power {
+				label = "Power Key";
+				linux,code = <KEY_POWER>;
+				gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>;
+				debounce-interval = <2>;
+				wakeup-source;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
new file mode 100644
index 000000000..22d81ace7
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SC9863A SoC DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,sc9863a-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "sharkl3.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		gic: interrupt-controller@14000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x14000000 0 0x20000>,	/* GICD */
+			      <0x0 0x14040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_clk: clock-controller@21500000 {
+			compatible = "sprd,sc9863a-ap-clk";
+			reg = <0 0x21500000 0 0x1000>;
+			clocks = <&ext_32k>, <&ext_26m>;
+			clock-names = "ext-32k", "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@402d0000 {
+			compatible = "sprd,sc9863a-aon-clk";
+			reg = <0 0x402d0000 0 0x1000>;
+			clocks = <&ext_26m>, <&rco_100m>,
+				 <&ext_32k>, <&ext_4m>;
+			clock-names = "ext-26m", "rco-100m",
+				      "ext-32k", "ext-4m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@60900000 {
+			compatible = "sprd,sc9863a-mm-clk";
+			reg = <0 0x60900000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		funnel@10001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x10001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_out_port>;
+					};
+				};
+			};
+		};
+
+		etb@10003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x10003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_little_out_port: endpoint {
+						remote-endpoint =
+						<&etf_little_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_little_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_little_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_little_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_little_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+			};
+		};
+
+		etf@12002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_little_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port0>;
+					};
+				};
+			};
+
+			in-port {
+				port {
+					etf_little_in: endpoint {
+						remote-endpoint =
+						<&funnel_little_out_port>;
+					};
+				};
+			};
+		};
+
+		etf@12003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x12003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_ca55_in_port1>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_big_out_port>;
+					};
+				};
+			};
+		};
+
+		funnel@12004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_ca55_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_ca55_in_port0: endpoint {
+						remote-endpoint =
+						<&etf_little_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_ca55_in_port1: endpoint {
+						remote-endpoint =
+						<&etf_big_out>;
+					};
+				};
+			};
+		};
+
+		funnel@12005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x12005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_big_out_port: endpoint {
+						remote-endpoint =
+						<&etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_big_in_port0: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_big_in_port1: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_big_in_port2: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_big_in_port3: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@13040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_little_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm@13440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm@13540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm@13640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm@13740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x13740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_big_in_port3>;
+					};
+				};
+			};
+		};
+
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			sdio0: sdio@20300000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x20300000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable";
+				clocks = <&aon_clk CLK_SDIO0_2X>,
+					 <&apahb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+				bus-width = <4>;
+				no-sdio;
+				no-mmc;
+			};
+
+			sdio3: sdio@20600000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x20600000 0 0x1000>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable";
+				clocks = <&aon_clk CLK_EMMC_2X>,
+					 <&apahb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&aon_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+				bus-width = <8>;
+				non-removable;
+				no-sdio;
+				no-sd;
+				cap-mmc-hw-reset;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
new file mode 100644
index 000000000..206a4afda
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc Sharkl3 platform DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20e00000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20e00000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20e00000 0x4000>;
+
+			apahb_gate: apahb-gate {
+				compatible = "sprd,sc9863a-apahb-gate";
+				reg = <0x0 0x1020>;
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402b0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402b0000 0x4000>;
+
+			pmu_gate: pmu-gate {
+				compatible = "sprd,sc9863a-pmu-gate";
+				reg = <0 0x1200>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		aon_apb_regs: syscon@402e0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402e0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402e0000 0x4000>;
+
+			aonapb_gate: aonapb-gate {
+				compatible = "sprd,sc9863a-aonapb-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@40353000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40353000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40353000 0x3000>;
+
+			pll: pll {
+				compatible = "sprd,sc9863a-pll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g4_regs: syscon@40359000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40359000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40359000 0x3000>;
+
+			mpll: mpll {
+				compatible = "sprd,sc9863a-mpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g5_regs: syscon@4035c000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x4035c000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4035c000 0x3000>;
+
+			rpll: rpll {
+				compatible = "sprd,sc9863a-rpll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g7_regs: syscon@40363000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40363000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40363000 0x3000>;
+
+			dpll: dpll {
+				compatible = "sprd,sc9863a-dpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		mm_ahb_regs: syscon@60800000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60800000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60800000 0x3000>;
+
+			mm_gate: mm-gate {
+				compatible = "sprd,sc9863a-mm-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71300000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71300000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71300000 0x4000>;
+
+			apapb_gate: apapb-gate {
+				compatible = "sprd,sc9863a-apapb-gate";
+				reg = <0 0x1000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart4: serial@400000 {
+				compatible = "sprd,sc9863a-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x400000 0x100>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: ext-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: ext-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: rco-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
new file mode 100644
index 000000000..69f64e7fc
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Spreadtrum Sharkl64 platform DTS file
+ *
+ * Copyright (C) 2014, Spreadtrum Communications Inc.
+ *
+ * This file is licensed under a dual GPLv2 or X11 license.
+ */
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			uart0: serial@70000000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70000000 0 0x100>;
+				interrupts = <0 2 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart1: serial@70100000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70100000 0 0x100>;
+				interrupts = <0 3 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart2: serial@70200000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70200000 0 0x100>;
+				interrupts = <0 4 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+
+			uart3: serial@70300000 {
+				compatible = "sprd,sc9836-uart";
+				reg = <0 0x70300000 0 0x100>;
+				interrupts = <0 5 0xf04>;
+				clocks = <&clk26mhz>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clk26mhz: clk26mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
new file mode 100644
index 000000000..6b95fd94c
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
@@ -0,0 +1,74 @@
+/*
+ * Spreadtrum SP9860g board
+ *
+ * Copyright (C) 2017, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "sc9860.dtsi"
+#include "sc2731.dtsi"
+
+/ {
+	model = "Spreadtrum SP9860G 3GFHD Board";
+
+	compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
+
+	aliases {
+		serial0 = &uart0; /* for Bluetooth */
+		serial1 = &uart1; /* UART console */
+		serial2 = &uart2; /* Reserved */
+		serial3 = &uart3; /* for GPS */
+		spi0 = &adi_bus;
+	};
+
+	memory{
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x60000000>,
+		      <0x1 0x80000000 0 0x60000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <1900000>;
+		charge-term-current-microamp = <120000>;
+		constant_charge_voltage_max_microvolt = <4350000>;
+		internal-resistance-micro-ohms = <250000>;
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+			<4022000 85>, <3983000 80>, <3949000 75>,
+			<3917000 70>, <3889000 65>, <3864000 60>,
+			<3835000 55>, <3805000 50>, <3787000 45>,
+			<3777000 40>, <3773000 35>, <3770000 30>,
+			<3765000 25>, <3752000 20>, <3724000 15>,
+			<3680000 10>, <3605000 5>, <3400000 0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
new file mode 100644
index 000000000..5c32c1596
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Unisoc SP9863A-1h10 boards DTS file
+ *
+ * Copyright (C) 2019, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "sc9863a.dtsi"
+
+/ {
+	model = "Spreadtrum SP9863A-1H10 Board";
+
+	compatible = "sprd,sp9863a-1h10", "sprd,sc9863a";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512-1h10.dts b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
new file mode 100644
index 000000000..46890f6d1
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512-1h10 boards DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include "ums512.dtsi"
+
+/ {
+	model = "Unisoc UMS512-1H10 Board";
+
+	compatible = "sprd,ums512-1h10", "sprd,ums512";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* SD card */
+&sdio0 {
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>;
+	sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>;
+	sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>;
+	sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+};
+
+/* EMMC storage */
+&sdio3 {
+	status = "okay";
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	cap-mmc-hw-reset;
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi
new file mode 100644
index 000000000..97ac550af
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -0,0 +1,911 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512 SoC DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,ums512-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu@400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu@600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu@700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a75";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@12000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_ahb_regs: syscon@20100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20100000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20100000 0x4000>;
+
+			apahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apahb-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pub_apb_regs: syscon@31050000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x31050000 0 0x9000>;
+		};
+
+		top_dvfs_apb_regs: syscon@322a0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x322a0000 0 0x8000>;
+		};
+
+		ap_intc0_regs: syscon@32310000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32310000 0 0x1000>;
+		};
+
+		ap_intc1_regs: syscon@32320000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32320000 0 0x1000>;
+		};
+
+		ap_intc2_regs: syscon@32330000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32330000 0 0x1000>;
+		};
+
+		ap_intc3_regs: syscon@32340000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32340000 0 0x1000>;
+		};
+
+		ap_intc4_regs: syscon@32350000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32350000 0 0x1000>;
+		};
+
+		ap_intc5_regs: syscon@32360000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32360000 0 0x1000>;
+		};
+
+		anlg_phy_g0_regs: syscon@32390000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32390000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x32390000 0x3000>;
+
+			dpll0: clock-controller@0 {
+				compatible = "sprd,ums512-g0-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@323b0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323b0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323b0000 0x3000>;
+
+			mpll1: clock-controller@0 {
+				compatible = "sprd,ums512-g2-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g3_regs: syscon@323c0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323c0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323c0000 0x3000>;
+
+			pll1: clock-controller@0 {
+				compatible = "sprd,ums512-g3-pll";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_gc_regs: syscon@323e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323e0000 0x3000>;
+
+			pll2: clock-controller@0 {
+				compatible = "sprd,ums512-gc-pll";
+				reg = <0x0 0x100>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g10_regs: syscon@323f0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323f0000 0 0x3000>;
+		};
+
+		aon_apb_regs: syscon@327d0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327d0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327d0000 0x3000>;
+
+			aonapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-aon-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_apb_regs: syscon@327e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327e0000 0x3000>;
+
+			pmu_gate: clock-controller@0 {
+				compatible = "sprd,ums512-pmu-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_apb_regs: syscon@3350d000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x3350d000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x3350d000 0x1000>;
+
+			audcpapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpapb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_ahb_regs: syscon@335e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x335e0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x335e0000 0x1000>;
+
+			audcpahb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-audcpahb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_apb_regs: syscon@60100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60100000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60100000 0x3000>;
+
+			gpu_clk: clock-controller@0 {
+				compatible = "sprd,ums512-gpu-clk";
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_dvfs_apb_regs: syscon@60110000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60110000 0 0x3000>;
+		};
+
+		mm_ahb_regs: syscon@62200000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x62200000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x62200000 0x3000>;
+
+			mm_gate: clock-controller@0 {
+				compatible = "sprd,ums512-mm-gate-clk";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71000000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71000000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71000000 0x3000>;
+
+			apapb_gate: clock-controller@0 {
+				compatible = "sprd,ums512-apapb-gate";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_clk: clock-controller@20200000 {
+			compatible = "sprd,ums512-ap-clk";
+			reg = <0 0x20200000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@32080000 {
+			compatible = "sprd,ums512-aonapb-clk";
+			reg = <0 0x32080000 0 0x1000>;
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@62100000 {
+			compatible = "sprd,ums512-mm-clk";
+			reg = <0 0x62100000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		/* SoC Funnel */
+		funnel@3c002000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3c002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_out_port>;
+					};
+				};
+			};
+		};
+
+		/* SoC ETF */
+		soc_etb: etb@3c003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3c003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core3/4/5/7 */
+		funnel@3e001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_lit_out_port: endpoint {
+						remote-endpoint =
+						<&corinth_etf_lit_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for little cores */
+		etf@3e002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_lit_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_lit_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_lit_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_lit_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for big cores */
+		etf@3e003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_big_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_big_out_port>;
+					};
+				};
+			};
+		};
+
+		/* Funnel to SoC */
+		funnel@3e004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_corinth_from_lit_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_lit_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_corinth_from_big_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core0/1/2/6 */
+		funnel@3e005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_big_out_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					funnel_core_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					funnel_core_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					funnel_core_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port@3 {
+					reg = <3>;
+					funnel_core_in_port6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm@3f040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm@3f140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm@3f240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm@3f340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm@3f440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm@3f540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm@3f640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm@3f740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port7>;
+					};
+				};
+			};
+		};
+
+		apb@70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			sdio0: mmc@1100000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1100000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_SDIO0_2X>,
+					 <&apapb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+
+			sdio3: mmc@1400000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0x1400000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_EMMC_2X>,
+					 <&apapb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+		};
+
+		aon: bus@32000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x32000000 0x1000000>;
+
+			adi_bus: spi@100000 {
+				compatible = "sprd,ums512-adi";
+				reg = <0x100000 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>,
+					<17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>,
+					<35 0x19b8>, <39 0x19ac>;
+			};
+		};
+	};
+
+	ext_26m: clk-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: clk-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: clk-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: clk-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
new file mode 100644
index 000000000..fece49704
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -0,0 +1,314 @@
+/*
+ * Spreadtrum Whale2 platform peripherals
+ *
+ * Copyright (C) 2016, Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ap_ahb_regs: syscon@20210000 {
+			compatible = "syscon";
+			reg = <0 0x20210000 0 0x10000>;
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "syscon";
+			reg = <0 0x402b0000 0 0x10000>;
+		};
+
+		aon_regs: syscon@402e0000 {
+			compatible = "syscon";
+			reg = <0 0x402e0000 0 0x10000>;
+		};
+
+		ana_regs: syscon@40400000 {
+			compatible = "syscon";
+			reg = <0 0x40400000 0 0x10000>;
+		};
+
+		agcp_regs: syscon@415e0000 {
+			compatible = "syscon";
+			reg = <0 0x415e0000 0 0x1000000>;
+		};
+
+		vsp_regs: syscon@61100000 {
+			compatible = "syscon";
+			reg = <0 0x61100000 0 0x10000>;
+		};
+
+		cam_regs: syscon@62100000 {
+			compatible = "syscon";
+			reg = <0 0x62100000 0 0x10000>;
+		};
+
+		disp_regs: syscon@63100000 {
+			compatible = "syscon";
+			reg = <0 0x63100000 0 0x10000>;
+		};
+
+		ap_apb_regs: syscon@70b00000 {
+			compatible = "syscon";
+			reg = <0 0x70b00000 0 0x40000>;
+		};
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial@0 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART0_EB>,
+				       <&ap_clk CLK_UART0>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial@100000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART1_EB>,
+				       <&ap_clk CLK_UART1>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart2: serial@200000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x200000 0x100>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART2_EB>,
+				       <&ap_clk CLK_UART2>, <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart3: serial@300000 {
+				compatible = "sprd,sc9860-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x300000 0x100>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "enable", "uart", "source";
+				clocks = <&apapb_gate CLK_UART3_EB>,
+				       <&ap_clk CLK_UART3>, <&ext_26m>;
+				status = "disabled";
+			};
+		};
+
+		ap-ahb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			ap_dma: dma-controller@20100000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x20100000 0 0x4000>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				/* For backwards compatibility: */
+				#dma-channels = <32>;
+				dma-channels = <32>;
+				clock-names = "enable";
+				clocks = <&apahb_gate CLK_DMA_EB>;
+			};
+
+			sdio3: sdio@50430000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x50430000 0 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+				clock-names = "sdio", "enable", "2x_enable";
+				clocks = <&aon_prediv CLK_EMMC_2X>,
+				       <&apahb_gate CLK_EMMC_EB>,
+				       <&aon_gate CLK_EMMC_2X_EN>;
+				assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+				assigned-clock-parents = <&clk_l0_409m6>;
+
+				sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+				sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+				sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+				sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+				vmmc-supply = <&vddemmccore>;
+				bus-width = <8>;
+				non-removable;
+				no-sdio;
+				no-sd;
+				cap-mmc-hw-reset;
+				mmc-hs400-enhanced-strobe;
+				mmc-hs400-1_8v;
+				mmc-hs200-1_8v;
+				mmc-ddr-1_8v;
+			};
+		};
+
+		aon {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			adi_bus: spi@40030000 {
+				compatible = "sprd,sc9860-adi";
+				reg = <0 0x40030000 0 0x10000>;
+				hwlocks = <&hwlock 0>;
+				hwlock-names = "adi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			timer@40050000 {
+				compatible = "sprd,sc9860-timer";
+				reg = <0 0x40050000 0 0x20>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_32k>;
+			};
+
+			timer@40050020 {
+				compatible = "sprd,sc9860-suspend-timer";
+				reg = <0 0x40050020 0 0x20>;
+				clocks = <&ext_32k>;
+			};
+
+			hwlock: hwspinlock@40500000 {
+				compatible = "sprd,hwspinlock-r3p0";
+				reg = <0 0x40500000 0 0x1000>;
+				#hwlock-cells = <1>;
+				clock-names = "enable";
+				clocks = <&aon_gate CLK_SPLK_EB>;
+			};
+
+			eic_debounce: gpio@40210000 {
+				compatible = "sprd,sc9860-eic-debounce";
+				reg = <0 0x40210000 0 0x80>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_latch: gpio@40210080 {
+				compatible = "sprd,sc9860-eic-latch";
+				reg = <0 0x40210080 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_async: gpio@402100a0 {
+				compatible = "sprd,sc9860-eic-async";
+				reg = <0 0x402100a0 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eic_sync: gpio@402100c0 {
+				compatible = "sprd,sc9860-eic-sync";
+				reg = <0 0x402100c0 0 0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			ap_gpio: gpio@40280000 {
+				compatible = "sprd,sc9860-gpio";
+				reg = <0 0x40280000 0 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			pin_controller: pinctrl@402a0000 {
+				compatible = "sprd,sc9860-pinctrl";
+				reg = <0 0x402a0000 0 0x10000>;
+			};
+
+			watchdog@40310000 {
+				compatible = "sprd,sp9860-wdt";
+				reg = <0 0x40310000 0 0x1000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-sec = <12>;
+				clock-names = "enable", "rtc_enable";
+				clocks = <&aon_gate CLK_APCPU_WDG_EB>,
+				       <&aon_gate CLK_AP_WDG_RTC_EB>;
+			};
+		};
+
+		agcp {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			agcp_dma: dma-controller@41580000 {
+				compatible = "sprd,sc9860-dma";
+				reg = <0 0x41580000 0 0x4000>;
+				#dma-cells = <1>;
+				/* For backwards compatibility: */
+				#dma-channels = <32>;
+				dma-channels = <32>;
+				clock-names = "enable", "ashb_eb";
+				clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+				       <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+			};
+		};
+	};
+
+	ext_32k: ext_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_26m: ext_26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_rco_100m: ext_rco_100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ext-rco-100m";
+	};
+
+	clk_l0_409m6: clk_l0_409m6 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <409600000>;
+		clock-output-names = "ext-409m6";
+	};
+};
diff --git a/arch/arm64/boot/dts/st/Makefile b/arch/arm64/boot/dts/st/Makefile
new file mode 100644
index 000000000..881fe1296
--- /dev/null
+++ b/arch/arm64/boot/dts/st/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_ARCH_STM32) += stm32mp257f-ev1.dtb
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
new file mode 100644
index 000000000..d34a1d5e7
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>; /* USART2_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 8, AF8)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 8, ANALOG)>; /* USART2_RX */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
new file mode 100644
index 000000000..5268a4321
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		ck_flexgen_08: ck-flexgen-08 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <100000000>;
+		};
+
+		ck_flexgen_51: ck-flexgen-51 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+
+		ck_icn_ls_mcu: ck-icn-ls-mcu {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	intc: interrupt-controller@4ac00000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x0 0x4ac10000 0x0 0x1000>,
+		      <0x0 0x4ac20000 0x0 0x2000>,
+		      <0x0 0x4ac40000 0x0 0x2000>,
+		      <0x0 0x4ac60000 0x0 0x2000>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges = <0x0 0x0 0x0 0x80000000>;
+
+		rifsc: rifsc-bus@42080000 {
+			compatible = "simple-bus";
+			reg = <0x42080000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usart2: serial@400e0000 {
+				compatible = "st,stm32h7-uart";
+				reg = <0x400e0000 0x400>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ck_flexgen_08>;
+				status = "disabled";
+			};
+		};
+
+		syscfg: syscon@44230000 {
+			compatible = "st,stm32mp25-syscfg", "syscon";
+			reg = <0x44230000 0x10000>;
+		};
+
+		pinctrl: pinctrl@44240000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-pinctrl";
+			ranges = <0 0x44240000 0xa0400>;
+			pins-are-numbered;
+
+			gpioa: gpio@44240000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOA";
+				status = "disabled";
+			};
+
+			gpiob: gpio@44250000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x10000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOB";
+				status = "disabled";
+			};
+
+			gpioc: gpio@44260000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOC";
+				status = "disabled";
+			};
+
+			gpiod: gpio@44270000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x30000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOD";
+				status = "disabled";
+			};
+
+			gpioe: gpio@44280000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x40000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOE";
+				status = "disabled";
+			};
+
+			gpiof: gpio@44290000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x50000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOF";
+				status = "disabled";
+			};
+
+			gpiog: gpio@442a0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x60000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOG";
+				status = "disabled";
+			};
+
+			gpioh: gpio@442b0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x70000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOH";
+				status = "disabled";
+			};
+
+			gpioi: gpio@442c0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x80000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOI";
+				status = "disabled";
+			};
+
+			gpioj: gpio@442d0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x90000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOJ";
+				status = "disabled";
+			};
+
+			gpiok: gpio@442e0000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xa0000 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOK";
+				status = "disabled";
+			};
+		};
+
+		pinctrl_z: pinctrl@46200000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32mp257-z-pinctrl";
+			ranges = <0 0x46200000 0x400>;
+			pins-are-numbered;
+
+			gpioz: gpio@46200000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x400>;
+				clocks = <&ck_icn_ls_mcu>;
+				st,bank-name = "GPIOZ";
+				st,bank-ioport = <11>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp253.dtsi b/arch/arm64/boot/dts/st/stm32mp253.dtsi
new file mode 100644
index 000000000..af48e82ef
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp253.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp251.dtsi"
+
+/ {
+	cpus {
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a35";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
new file mode 100644
index 000000000..e6fa59621
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp253.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257.dtsi b/arch/arm64/boot/dts/st/stm32mp257.dtsi
new file mode 100644
index 000000000..5c5000d3d
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257.dtsi
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+#include "stm32mp255.dtsi"
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
new file mode 100644
index 000000000..39b4726cc
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp257.dtsi"
+#include "stm32mp25xf.dtsi"
+#include "stm32mp25-pinctrl.dtsi"
+#include "stm32mp25xxai-pinctrl.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP257F-EV1 Evaluation Board";
+	compatible = "st,stm32mp257f-ev1", "st,stm32mp257";
+
+	aliases {
+		serial0 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		fw@80000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x80000000 0x0 0x4000000>;
+			no-map;
+		};
+	};
+};
+
+&usart2 {
+	pinctrl-names = "default", "idle", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_idle_pins_a>;
+	pinctrl-2 = <&usart2_sleep_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xc.dtsi b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
new file mode 100644
index 000000000..5e83a6926
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xc.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xf.dtsi b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
new file mode 100644
index 000000000..5e83a6926
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xf.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi
new file mode 100644
index 000000000..abdbc7aeb
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xxai-pinctrl.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AI>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
+
+	gpioj: gpio@442d0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
+
+	gpiok: gpio@442e0000 {
+		status = "okay";
+		ngpios = <8>;
+		gpio-ranges = <&pinctrl 0 160 8>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi
new file mode 100644
index 000000000..2e0d4d349
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xxak-pinctrl.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AK>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};
diff --git a/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi
new file mode 100644
index 000000000..2406e9725
--- /dev/null
+++ b/arch/arm64/boot/dts/st/stm32mp25xxal-pinctrl.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2023 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+	st,package = <STM32MP_PKG_AL>;
+
+	gpioa: gpio@44240000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
+
+	gpiob: gpio@44250000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
+
+	gpioc: gpio@44260000 {
+		status = "okay";
+		ngpios = <14>;
+		gpio-ranges = <&pinctrl 0 32 14>;
+	};
+
+	gpiod: gpio@44270000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
+
+	gpioe: gpio@44280000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
+
+	gpiof: gpio@44290000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
+
+	gpiog: gpio@442a0000 {
+		status = "okay";
+		ngpios = <16>;
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
+
+	gpioh: gpio@442b0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 2 114 12>;
+	};
+
+	gpioi: gpio@442c0000 {
+		status = "okay";
+		ngpios = <12>;
+		gpio-ranges = <&pinctrl 0 128 12>;
+	};
+};
+
+&pinctrl_z {
+	gpioz: gpio@46200000 {
+		status = "okay";
+		ngpios = <10>;
+		gpio-ranges = <&pinctrl_z 0 400 10>;
+	};
+};
diff --git a/arch/arm64/boot/dts/synaptics/Makefile b/arch/arm64/boot/dts/synaptics/Makefile
new file mode 100644
index 000000000..de71ddda6
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+# Berlin SoC Family
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts
new file mode 100644
index 000000000..c64a179eb
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "Marvell BG4CT DMP board";
+	compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@1000000 {
+		device_type = "memory";
+		/* the first 16MB is for firmwares' usage */
+		reg = <0 0x01000000 0 0x7f000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts
new file mode 100644
index 000000000..277dccfa0
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "Marvell BG4CT STB board";
+	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@1000000 {
+		device_type = "memory";
+		/* the first 16MB is for firmwares' usage */
+		reg = <0 0x01000000 0 0x7f000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
new file mode 100644
index 000000000..53d616c3c
--- /dev/null
+++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "marvell,berlin4ct", "marvell,berlin";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		l2: cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <75>;
+				exit-latency-us = <155>;
+				min-residency-us = <1000>;
+			};
+		};
+	};
+
+	osc: osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc@f7000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0xf7000000 0x1000000>;
+
+		gic: interrupt-controller@901000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x901000 0x1000>,
+			      <0x902000 0x2000>,
+			      <0x904000 0x2000>,
+			      <0x906000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		soc_pinctrl: pin-controller@ea8000 {
+			compatible = "marvell,berlin4ct-soc-pinctrl";
+			reg = <0xea8000 0x14>;
+		};
+
+		avio_pinctrl: pin-controller@ea8400 {
+			compatible = "marvell,berlin4ct-avio-pinctrl";
+			reg = <0xea8400 0x8>;
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			sic: interrupt-controller@1000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x1000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			wdt0: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&osc>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@4000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x4000 0x100>;
+				clocks = <&osc>;
+				interrupts = <1>;
+			};
+
+			wdt2: watchdog@5000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x5000 0x100>;
+				clocks = <&osc>;
+				interrupts = <2>;
+			};
+
+			sm_gpio0: gpio@8000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x8000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio1: gpio@9000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x9000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					ngpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			uart0: serial@d000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xd000 0x100>;
+				interrupts = <8>;
+				clocks = <&osc>;
+				reg-shift = <2>;
+				status = "disabled";
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+			};
+		};
+
+		system_pinctrl: pin-controller@fe2200 {
+			compatible = "marvell,berlin4ct-system-pinctrl";
+			reg = <0xfe2200 0xc>;
+
+			uart0_pmux: uart0-pmux {
+				groups = "SM_URT0_TXD", "SM_URT0_RXD";
+				function = "uart0";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile
new file mode 100644
index 000000000..a1ee50e2f
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TESLA_FSD) += \
+	fsd-evb.dtb
diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
new file mode 100644
index 000000000..8d7794642
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Tesla FSD board device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+/dts-v1/;
+#include "fsd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Tesla Full Self-Driving (FSD) Evaluation board";
+	compatible = "tesla,fsd-evb", "tesla,fsd";
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,name = "FSD Audio Card";
+		simple-audio-card,widgets = "Line", "Line Out",
+					    "Line", "Line In";
+		simple-audio-card,routing = "Line Out", "LLOUT",
+					    "Line Out", "RLOUT",
+					    "MIC2L", "Line In",
+					    "MIC2R", "Line In";
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			format = "i2s";
+			bitclock-master = <&tlv320aic3x>;
+			frame-master = <&tlv320aic3x>;
+
+			cpu-0 {
+				sound-dai = <&i2s_0 0>;
+			};
+			cpu-1 {
+				sound-dai = <&i2s_0 1>;
+			};
+			codec {
+				sound-dai = <&tlv320aic3x>;
+				system-clock-frequency = <33000000>;
+			};
+		};
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&hsi2c_5 {
+	status = "okay";
+
+	tlv320aic3x: codec@18 {
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&gpg1 6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2s_0 {
+	status = "okay";
+};
+
+&i2s_1 {
+	status = "okay";
+};
+
+&m_can0 {
+	status = "okay";
+};
+
+&m_can1 {
+	status = "okay";
+};
+
+&m_can2 {
+	status = "okay";
+};
+
+&m_can3 {
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&ufs {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
new file mode 100644
index 000000000..3f898cf48
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include "fsd-pinctrl.h"
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf6: gpf6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n-pins {
+		samsung,pins = "gpf5-0";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out-pins {
+		samsung,pins = "gpf5-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peric {
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb7: gpb7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg6: gpg6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg7: gpg7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpb6-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpb6-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpb0-2", "gpb0-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpb0-4", "gpb0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpb0-6", "gpb0-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpb1-2", "gpb1-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpb1-4", "gpb1-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpb1-6", "gpb1-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpb7-0", "gpb7-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpb7-4", "gpb7-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can0_bus: m-can0-bus-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can1_bus: m-can1-bus-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can2_bus: m-can2-bus-pins {
+		samsung,pins = "gpd0-4", "gpd0-5";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	m_can3_bus: m-can3-bus-pins {
+		samsung,pins = "gpd0-6", "gpd0-7";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_UP>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2", "gpd1-3", "gpd1-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpd2-0", "gpd2-1", "gpd2-2", "gpd2-3", "gpd2-4";
+		samsung,pin-function = <FSD_PIN_FUNC_2>;
+		samsung,pin-pud = <FSD_PIN_PULL_DOWN>;
+		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_pmu {
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.h b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
new file mode 100644
index 000000000..c397d0220
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Tesla FSD DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM64_TESLA_FSD_PINCTRL_H__
+#define __DTS_ARM64_TESLA_FSD_PINCTRL_H__
+
+#define FSD_PIN_PULL_NONE		0
+#define FSD_PIN_PULL_DOWN		1
+#define FSD_PIN_PULL_UP			3
+
+#define FSD_PIN_DRV_LV1			0
+#define FSD_PIN_DRV_LV2			1
+#define FSD_PIN_DRV_LV4			2
+#define FSD_PIN_DRV_LV6			3
+
+#define FSD_PIN_FUNC_INPUT		0
+#define FSD_PIN_FUNC_OUTPUT		1
+#define FSD_PIN_FUNC_2			2
+#define FSD_PIN_FUNC_3			3
+#define FSD_PIN_FUNC_4			4
+#define FSD_PIN_FUNC_5			5
+#define FSD_PIN_FUNC_6			6
+#define FSD_PIN_FUNC_EINT		0xf
+#define FSD_PIN_FUNC_F			FSD_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM64_TESLA_FSD_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
new file mode 100644
index 000000000..bb50a9f7d
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -0,0 +1,990 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2022 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include <dt-bindings/clock/fsd-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "tesla,fsd";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &hsi2c_0;
+		i2c1 = &hsi2c_1;
+		i2c2 = &hsi2c_2;
+		i2c3 = &hsi2c_3;
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		pinctrl0 = &pinctrl_fsys0;
+		pinctrl1 = &pinctrl_peric;
+		pinctrl2 = &pinctrl_pmu;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpucl0_0>;
+				};
+				core1 {
+					cpu = <&cpucl0_1>;
+				};
+				core2 {
+					cpu = <&cpucl0_2>;
+				};
+				core3 {
+					cpu = <&cpucl0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpucl1_0>;
+				};
+				core1 {
+					cpu = <&cpucl1_1>;
+				};
+				core2 {
+					cpu = <&cpucl1_2>;
+				};
+				core3 {
+					cpu = <&cpucl1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpucl2_0>;
+				};
+				core1 {
+					cpu = <&cpucl2_1>;
+				};
+				core2 {
+					cpu = <&cpucl2_2>;
+				};
+				core3 {
+					cpu = <&cpucl2_3>;
+				};
+			};
+		};
+
+		/* Cluster 0 */
+		cpucl0_0: cpu@0 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x000>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl0_1: cpu@1 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x001>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl0_2: cpu@2 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x002>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl0_3: cpu@3 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x003>;
+				enable-method = "psci";
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		/* Cluster 1 */
+		cpucl1_0: cpu@100 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x100>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl1_1: cpu@101 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x101>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl1_2: cpu@102 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x102>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl1_3: cpu@103 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x103>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		/* Cluster 2 */
+		cpucl2_0: cpu@200 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x200>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl2_1: cpu@201 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x201>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl2_2: cpu@202 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x202>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl2_3: cpu@203 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x203>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+				i-cache-size = <0xc000>;
+				i-cache-line-size = <64>;
+				i-cache-sets = <256>;
+				d-cache-size = <0x8000>;
+				d-cache-line-size = <64>;
+				d-cache-sets = <256>;
+				next-level-cache = <&cpucl_l2>;
+		};
+
+		cpucl_l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+			cache-line-size = <64>;
+			cache-sets = <4096>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <30>;
+				exit-latency-us = <75>;
+				min-residency-us = <300>;
+			};
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
+				     <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
+				     <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
+				     <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	fin_pll: clock {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
+			      <0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu_imem: iommu@10200000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <7>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0  */
+				     /* Per context non-secure context interrupts, 0-3 interrupts */
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */
+		};
+
+		smmu_isp: iommu@12100000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x12100000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <11>;
+			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI   */
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0  */
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1  */
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */
+				     /* Per context non-secure context interrupts, 0-7 interrupts */
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */
+		};
+
+		smmu_peric: iommu@14900000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x14900000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+		};
+
+		smmu_fsys0: iommu@15450000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x15450000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0   */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+		};
+
+		clock_imem: clock-controller@10010000 {
+			compatible = "tesla,fsd-clock-imem";
+			reg = <0x0 0x10010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
+				<&clock_cmu DOUT_CMU_IMEM_ACLK>,
+				<&clock_cmu DOUT_CMU_IMEM_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_imem_tcuclk",
+				"dout_cmu_imem_aclk",
+				"dout_cmu_imem_dmaclk";
+		};
+
+		clock_cmu: clock-controller@11c10000 {
+			compatible = "tesla,fsd-clock-cmu";
+			reg = <0x0 0x11c10000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_csi: clock-controller@12610000 {
+			compatible = "tesla,fsd-clock-cam_csi";
+			reg = <0x0 0x12610000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		sysreg_cam: system-controller@12630000 {
+			compatible = "tesla,fsd-cam-sysreg", "syscon";
+			reg = <0x0 0x12630000 0x0 0x500>;
+		};
+
+		clock_mfc: clock-controller@12810000 {
+			compatible = "tesla,fsd-clock-mfc";
+			reg = <0x0 0x12810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_peric: clock-controller@14010000 {
+			compatible = "tesla,fsd-clock-peric";
+			reg = <0x0 0x14010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div4",
+				"dout_cmu_peric_shared1div36",
+				"dout_cmu_peric_shared0div3_tbuclk",
+				"dout_cmu_peric_shared0div20",
+				"dout_cmu_peric_shared1div4_dmaclk";
+		};
+
+		sysreg_peric: system-controller@14030000 {
+			compatible = "tesla,fsd-peric-sysreg", "syscon";
+			reg = <0x0 0x14030000 0x0 0x1000>;
+		};
+
+		clock_fsys0: clock-controller@15010000 {
+			compatible = "tesla,fsd-clock-fsys0";
+			reg = <0x0 0x15010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div6",
+				"dout_cmu_fsys0_shared1div4",
+				"dout_cmu_fsys0_shared0div4";
+		};
+
+		sysreg_fsys0: system-controller@15030000 {
+			compatible = "tesla,fsd-fsys0-sysreg", "syscon";
+			reg = <0x0 0x15030000 0x0 0x1000>;
+		};
+
+		clock_fsys1: clock-controller@16810000 {
+			compatible = "tesla,fsd-clock-fsys1";
+			reg = <0x0 0x16810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_fsys1_shared0div8",
+				"dout_cmu_fsys1_shared0div4";
+		};
+
+		sysreg_fsys1: system-controller@16830000 {
+			compatible = "tesla,fsd-fsys1-sysreg", "syscon";
+			reg = <0x0 0x16830000 0x0 0x1000>;
+		};
+
+		mdma0: dma-controller@10100000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10100000 0x0 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x800 0x0>;
+		};
+
+		mdma1: dma-controller@10110000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10110000 0x0 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x801 0x0>;
+		};
+
+		pdma0: dma-controller@14280000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14280000 0x0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x2 0x0>;
+		};
+
+		pdma1: dma-controller@14290000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14290000 0x0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x1 0x0>;
+		};
+
+		serial_0: serial@14180000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14180000 0x0 0x100>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 1>, <&pdma1 0>;
+			dma-names = "rx", "tx";
+			clocks = <&clock_peric PERIC_PCLK_UART0>,
+				 <&clock_peric PERIC_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14190000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14190000 0x0 0x100>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 3>, <&pdma1 2>;
+			dma-names = "rx", "tx";
+			clocks = <&clock_peric PERIC_PCLK_UART1>,
+				 <&clock_peric PERIC_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pmu_system_controller: system-controller@11400000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x0 0x11400000 0x0 0x5000>;
+		};
+
+		watchdog_0: watchdog@100a0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		watchdog_1: watchdog@100b0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		watchdog_2: watchdog@100c0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		pwm_0: pwm@14100000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14100000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		pwm_1: pwm@14110000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14110000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		hsi2c_0: i2c@14200000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14200000 0x0 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@14210000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14210000 0x0 0x1000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14220000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14220000 0x0 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14230000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@14240000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14240000 0x0 0x1000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@14250000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14250000 0x0 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14260000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@14270000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		i2s_0: i2s@140e0000 {
+			compatible = "tesla,fsd-i2s";
+			reg = <0x0 0x140e0000 0x0 0x100>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 14>, <&pdma1 13>, <&pdma1 12>;
+			dma-names = "tx", "rx", "tx-sec";
+			#clock-cells = <1>;
+			clocks = <&clock_peric PERIC_PCLK_TDM0>,
+				 <&clock_peric PERIC_HCLK_TDM0>,
+				 <&clock_peric PERIC_HCLK_TDM0>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		i2s_1: i2s@140f0000 {
+			compatible = "tesla,fsd-i2s";
+			reg = <0x0 0x140f0000 0x0 0x100>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 17>, <&pdma1 16>, <&pdma1 15>;
+			dma-names = "tx", "rx", "tx-sec";
+			#clock-cells = <1>;
+			clocks = <&clock_peric PERIC_PCLK_TDM1>,
+				 <&clock_peric PERIC_HCLK_TDM1>,
+				 <&clock_peric PERIC_HCLK_TDM1>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
+
+		pinctrl_pmu: pinctrl@114f0000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x114f0000 0x0 0x1000>;
+		};
+
+		pinctrl_peric: pinctrl@141f0000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x141f0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@15020000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x15020000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		m_can0: can@14088000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x14088000 0x0 0x0200>,
+			      <0x0 0x14080000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can0_bus>;
+			clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		m_can1: can@14098000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x14098000 0x0 0x0200>,
+			      <0x0 0x14090000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can1_bus>;
+			clocks = <&clock_peric PERIC_MCAN1_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN1_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		m_can2: can@140a8000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x140a8000 0x0 0x0200>,
+			      <0x0 0x140a0000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can2_bus>;
+			clocks = <&clock_peric PERIC_MCAN2_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN2_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		m_can3: can@140b8000 {
+			compatible = "bosch,m_can";
+			reg = <0x0 0x140b8000 0x0 0x0200>,
+			      <0x0 0x140b0000 0x0 0x8000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			pinctrl-names = "default";
+			pinctrl-0 = <&m_can3_bus>;
+			clocks = <&clock_peric PERIC_MCAN3_IPCLKPORT_PCLK>,
+				 <&clock_peric PERIC_MCAN3_IPCLKPORT_CCLK>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		spi_0: spi@14140000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14140000 0x0 0x100>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 4>, <&pdma1 5>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI0>,
+				<&clock_peric PERIC_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14150000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14150000 0x0 0x100>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 6>, <&pdma1 7>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI1>,
+				<&clock_peric PERIC_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14160000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14160000 0x0 0x100>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 8>, <&pdma1 9>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI2>,
+				<&clock_peric PERIC_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		timer@10040000 {
+			compatible = "tesla,fsd-mct", "samsung,exynos4210-mct";
+			reg = <0x0 0x10040000 0x0 0x800>;
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		ufs: ufs@15120000 {
+			compatible = "tesla,fsd-ufs";
+			reg = <0x0 0x15120000 0x0 0x200>,  /* 0: HCI standard */
+			      <0x0 0x15121100 0x0 0x200>,  /* 1: Vendor specified */
+			      <0x0 0x15110000 0x0 0x8000>,  /* 2: UNIPRO */
+			      <0x0 0x15130000 0x0 0x100>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 UFS0_TOP0_HCLK_BUS>,
+				 <&clock_fsys0 UFS0_TOP0_CLK_UNIPRO>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@15124000 {
+			compatible = "tesla,fsd-ufs-phy";
+			reg = <0x0 0x15124000 0x0 0x800>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&clock_fsys0 UFS0_MPHY_REFCLK_IXTAL26>;
+			clock-names = "ref_clk";
+		};
+	};
+};
+
+#include "fsd-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
new file mode 100644
index 000000000..8bd5acc6d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Make file to build device tree binaries for boards based on
+# Texas Instruments Inc processors
+#
+# Copyright (C) 2016-2021 Texas Instruments Incorporated - https://www.ti.com/
+#
+# Entries are grouped as per SoC present on the board. Groups are sorted
+# alphabetically.
+
+# Boards with AM62x SoC
+k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb
+
+# Boards with AM62Ax SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
+
+# Boards with AM62Px SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+
+# Boards with AM64x SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
+
+k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
+k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
+	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
+
+dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb
+
+# Boards with AM65x SoC
+k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-m2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced-pg2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am654-gp-evm.dtb
+
+# Boards with J7200 SoC
+k3-j7200-evm-dtbs := k3-j7200-common-proc-board.dtb k3-j7200-evm-quad-port-eth-exp.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j7200-evm.dtb
+
+# Boards with J721e SoC
+k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-exp.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
+
+# Boards with J721s2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
+k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
+
+# Boards with J784s4 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb
+
+# Enable support for device-tree overlays
+DTC_FLAGS_k3-am625-sk += -@
+DTC_FLAGS_k3-am62-lp-sk += -@
+DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
+DTC_FLAGS_k3-j721e-common-proc-board += -@
+DTC_FLAGS_k3-j721s2-common-proc-board += -@
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
new file mode 100644
index 000000000..5e6feb8cd
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM62x LP SK: https://www.ti.com/tool/SK-AM62-LP
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	compatible = "ti,am62-lp-sk", "ti,am625";
+	model = "Texas Instruments AM62x LP SK";
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of TPS630702RNMR */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddshv_sdio: regulator-4 {
+		compatible = "regulator-gpio";
+		regulator-name = "vddshv_sdio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vddshv_sdio_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1_reg>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (B16) EXTINTn */
+		>;
+	};
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO0",
+				   "CSI_GPIO1", "GPIO_OLDI_INT",
+				   "HDMI_INTn", "TEST_GPIO2",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+	};
+
+	exp2: gpio@23 {
+		compatible = "ti,tca6424";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "", "",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "WL_LT_EN", "CSI_RSTz",
+				   "", "",
+				   "", "",
+				   "", "",
+				   "SPI0_FET_SEL", "SPI0_FET_OE",
+				   "GPIO_OLDI_RSTn", "PRU_3V3_EN",
+				   "", "",
+				   "CSI_VLDO_SEL", "SOC_WLAN_SDIO_RST";
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vddshv_sdio>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vcc_3v3_sys>;
+		buck2-supply = <&vcc_3v3_sys>;
+		buck3-supply = <&vcc_3v3_sys>;
+		ldo1-supply = <&vcc_3v3_sys>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vcc_3v3_sys>;
+		ldo4-supply = <&vcc_3v3_sys>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VCC1V8_SYS";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_LPDDR4";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "VDDSHV_SDIO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDAR_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&tlv320aic3106 {
+	DVDD-supply = <&buck2_reg>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
new file mode 100644
index 000000000..284b90c94
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -0,0 +1,958 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x10000>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_conf: syscon@100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x00100000 0x20000>;
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4130 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+
+		audio_refclk0: clock-controller@82e0 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e0 0x4>;
+			clocks = <&k3_clks 157 0>;
+			assigned-clocks = <&k3_clks 157 0>;
+			assigned-clock-parents = <&k3_clks 157 8>;
+			#clock-cells = <0>;
+		};
+
+		audio_refclk1: clock-controller@82e4 {
+			compatible = "ti,am62-audio-refclk";
+			reg = <0x82e4 0x4>;
+			clocks = <&k3_clks 157 10>;
+			assigned-clocks = <&k3_clks 157 10>;
+			assigned-clock-parents = <&k3_clks 157 18>;
+			#clock-cells = <0>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <4 68 36>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>; /* SAUL_TX_1_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>; /* RING_SAUL_TX_1_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>; /* SAUL_RX_3_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	crypto: crypto@40900000 {
+		compatible = "ti,am62-sa3ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+
+		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
+		       <&main_pktdma 0x7507 0>;
+		dma-names = "tx", "rx1", "rx2";
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>, <162>, <163>, <177>, <178>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <92>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <52>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 57 6>;
+		assigned-clock-parents = <&k3_clks 57 8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,trm-icp = <0x2>;
+		bus-width = <8>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-mmc-hs = <0x1>;
+		status = "disabled";
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x8>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0x1>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
+		ti,clkbuf-sel = <0x7>;
+		bus-width = <4>;
+		status = "disabled";
+	};
+
+	sdhci2: mmc@fa20000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x8>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x8>;
+		ti,itap-del-sel-legacy = <0xa>;
+		ti,itap-del-sel-sd-hs = <0xa>;
+		ti,itap-del-sel-sdr12 = <0xa>;
+		ti,itap-del-sel-sdr25 = <0x1>;
+		ti,clkbuf-sel = <0x7>;
+		status = "disabled";
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 75 7>;
+			assigned-clocks = <&k3_clks 75 7>;
+			assigned-clock-parents = <&k3_clks 75 8>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x08000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 3>;
+		assigned-clock-parents = <&k3_clks 13 11>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_pktdma 0xc600 15>,
+		       <&main_pktdma 0xc601 15>,
+		       <&main_pktdma 0xc602 15>,
+		       <&main_pktdma 0xc603 15>,
+		       <&main_pktdma 0xc604 15>,
+		       <&main_pktdma 0xc605 15>,
+		       <&main_pktdma 0xc606 15>,
+		       <&main_pktdma 0xc607 15>,
+		       <&main_pktdma 0x4600 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&wkup_conf 0x200>;
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 13 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	dss: dss@30200000 {
+		compatible = "ti,am625-dss";
+		reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+		      <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+		      <0x00 0x30206000 0x00 0x1000>, /* vid */
+		      <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+		      <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+		      <0x00 0x3020a000 0x00 0x1000>, /* vp1: Used for OLDI */
+		      <0x00 0x3020b000 0x00 0x1000>; /* vp2: Used as DPI Out */
+		reg-names = "common", "vidl1", "vid",
+			    "ovr1", "ovr2", "vp1", "vp2";
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 186 6>,
+			 <&dss_vp1_clk>,
+			 <&k3_clks 186 2>;
+		clock-names = "fck", "vp1", "vp2";
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti15: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	mcasp0: audio-controller@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b00000 0x00 0x2000>,
+		      <0x00 0x02b08000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 190 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 190 0>;
+		assigned-clock-parents = <&k3_clks 190 2>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: audio-controller@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b10000 0x00 0x2000>,
+		      <0x00 0x02b18000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 191 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 191 0>;
+		assigned-clock-parents = <&k3_clks 191 2>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: audio-controller@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x00 0x02b20000 0x00 0x2000>,
+		      <0x00 0x02b28000 0x00 0x400>;
+		reg-names = "mpu", "dat";
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 192 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 192 0>;
+		assigned-clock-parents = <&k3_clks 192 2>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
new file mode 100644
index 000000000..80a3e1db2
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_esm: esm@4100000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x4100000 0x00 0x1000>;
+		ti,esm-pins = <0>, <1>, <2>, <85>;
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x4201000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <24>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
+
+	mcu_mcan0: can@4e08000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e08000 0x00 0x200>,
+		      <0x00 0x4e00000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@4e18000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e18000 0x00 0x200>,
+		      <0x00 0x4e10000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
new file mode 100644
index 000000000..aa43e7407
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phycore-am62x
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-AM62x";
+	compatible = "phytec,am62-phycore-som", "ti,am625";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		gpio0 = &main_gpio0;
+		gpio1 = &main_gpio1;
+		i2c0 = &main_i2c0;
+		mmc0 = &sdhci0;
+		rtc0 = &i2c_som_rtc;
+		rtc1 = &wkup_rtc0;
+		spi0 = &ospi0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0x00c00000>;
+			no-map;
+		};
+	};
+
+	vcc_5v0_som: regulator-vcc-5v0-som {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0_SOM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8: regulator-vdd-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5v0_som>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+};
+
+&main_pmx0 {
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x034, PIN_OUTPUT, 7) /* (H21) OSPI0_CSN2.GPIO0_13 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+			AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+			AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+			AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+			AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+	status = "okay";
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vcc_5v0_som>;
+		buck2-supply = <&vcc_5v0_som>;
+		buck3-supply = <&vcc_5v0_som>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&vdd_1v8>;
+		ldo3-supply = <&vcc_5v0_som>;
+		ldo4-supply = <&vcc_5v0_som>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		ti,power-button;
+		system-power-controller;
+
+		regulators {
+			vdd_core: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_3v3: buck2 {
+				regulator-name = "VDD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_ddr4: buck3 {
+				regulator-name = "VDD_DDR4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddshv5_sdio: ldo1 {
+				regulator-name = "VDDSHV5_SDIO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddr_core: ldo2 {
+				regulator-name = "VDDR_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_1v8: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdd_2v5: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
new file mode 100644
index 000000000..a358757e2
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
new file mode 100644
index 000000000..013357d17
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Dahlia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/ {
+	reg_1v8_sw: regulator-1v8-sw {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-carrier +V1.8_SW";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "verdin-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_refclk1>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_refclk1>;
+		clock-names = "mclk";
+		AVDD-supply = <&reg_1v8_sw>;
+		CPVDD-supply = <&reg_1v8_sw>;
+		DBVDD-supply = <&reg_1v8_sw>;
+		DCVDD-supply = <&reg_1v8_sw>;
+		MICVDD-supply = <&reg_1v8_sw>;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	ti,driver-strength-ohm = <33>;
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	/* FIXME: WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
new file mode 100644
index 000000000..6701cb897
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Development carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/ {
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,name = "verdin-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_refclk1>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>, <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+
+	cpsw3g_phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+		micrel,led-mode = <0>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	phy-handle = <&cpsw3g_phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s1_mclk>;
+		#sound-dai-cells = <0>;
+	};
+
+	/* IO Expander */
+	gpio_expander_21: gpio@21 {
+		compatible = "nxp,pcal6416";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	/* Current measurement into module VCC */
+	hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver. */
+&main_uart1 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	ti,driver-strength-ohm = <33>;
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	/* FIXME: WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi
new file mode 100644
index 000000000..68d07695e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM non-WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ */
+
+&sdhci2 {
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	bus-width = <4>;
+	status = "disabled";
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
new file mode 100644
index 000000000..90ddc71bc
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM WB variant
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ */
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_en>;
+		reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* On-module Wi-Fi */
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci2>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	ti,fails-without-test-cd;
+	ti,driver-strength-ohm = <50>;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+/* On-module Bluetooth */
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
new file mode 100644
index 000000000..c685df7de
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Yavia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
+			    <&pinctrl_qspi1_cs_gpio>,
+			    <&pinctrl_qspi1_io0_gpio>,
+			    <&pinctrl_qspi1_io1_gpio>,
+			    <&pinctrl_qspi1_io2_gpio>,
+			    <&pinctrl_qspi1_io3_gpio>;
+
+		/* SODIMM 52 - LD1_RED */
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 54 - LD1_GREEN */
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 56 - LD1_BLUE */
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 58 - LD2_RED */
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 60 - LD2_GREEN */
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+		};
+		/* SODIMM 62 - LD2_BLUE */
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Verdin ETHs */
+&cpsw3g {
+	status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	status = "okay";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+		    <&pinctrl_gpio_5>,
+		    <&pinctrl_gpio_6>,
+		    <&pinctrl_gpio_7>,
+		    <&pinctrl_gpio_8>,
+		    <&pinctrl_qspi1_cs2_gpio>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	status = "okay";
+
+	/* Temperature sensor */
+	sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+	};
+
+	/* EEPROM */
+	eeprom@57 {
+		compatible = "st,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	status = "okay";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	status = "okay";
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	status = "okay";
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_1>,
+		    <&pinctrl_gpio_2>,
+		    <&pinctrl_gpio_3>,
+		    <&pinctrl_gpio_4>;
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	status = "okay";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	status = "okay";
+};
+
+/* Verdin UART_4 */
+&mcu_uart0 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* Verdin CTRL_WAKE1_MICO# */
+&verdin_gpio_keys {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	/* FIXME: WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
new file mode 100644
index 000000000..5db52f237
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -0,0 +1,1443 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		can0 = &main_mcan0;
+		can1 = &mcu_mcan0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		i2c2 = &main_i2c2;
+		i2c3 = &mcu_i2c0;
+		i2c4 = &main_i2c3;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &wkup_rtc0;
+		serial0 = &main_uart1;
+		serial1 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &mcu_uart0;
+		serial4 = &main_uart5;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	verdin_gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;
+		status = "disabled";
+
+		verdin_key_wakeup: key-wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&main_gpio0 32 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>; /* 1G RAM */
+	};
+
+	opp-table {
+		/* Add 1.4GHz OPP. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	/* Module Power Supply */
+	reg_vsodimm: regulator-vsodimm {
+		compatible = "regulator-fixed";
+		regulator-name = "+V_SODIMM";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "On-module +V3.3";
+		vin-supply = <&reg_vsodimm>;
+	};
+
+	reg_1v2_dsi: regulator-1v2-dsi {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1200000>;
+		regulator-min-microvolt = <1200000>;
+		regulator-name = "On-module +V1.2_DSI";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Enabled by +V1.2_DSI */
+	reg_1v8_dsi: regulator-1v8-dsi {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-module +V1.8_DSI";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Enabled by +V2.5_ETH */
+	reg_1v0_eth: regulator-1v0-eth {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1000000>;
+		regulator-min-microvolt = <1000000>;
+		regulator-name = "On-module +V1.0_ETH";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Enabled by +V2.5_ETH */
+	reg_1v8_eth: regulator-1v8-eth {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "On-module +V1.8_ETH";
+		vin-supply = <&reg_1v8>;
+	};
+
+	/* Verdin SD_1 Power Supply */
+	reg_sdhc1_vmmc: regulator-sdhci1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_pwr_en>;
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&main_gpio0 29 GPIO_ACTIVE_HIGH>;
+		off-on-delay-us = <100000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vsel_sd>;
+		/* PMIC_VSEL_SD */
+		gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		regulator-name = "LDO1-VSEL-SD (PMIC)";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		vin-supply = <&reg_sd_3v3_1v8>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	/* Verdin PWM_1 */
+	pinctrl_epwm0_a: main-epwm0a-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b4, PIN_OUTPUT, 2) /* (A13) SPI0_CS0.EHRPWM0_A */ /* SODIMM 15 */
+		>;
+	};
+
+	/* Verdin PWM_2 */
+	pinctrl_epwm0_b: main-epwm0b-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b8, PIN_OUTPUT, 2) /* (C13) SPI0_CS1.EHRPWM0_B */ /* SODIMM 16 */
+		>;
+	};
+
+	/* Verdin PWM_3_DSI */
+	pinctrl_epwm1_a: main-epwm1a-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01bc, PIN_OUTPUT, 2) /* (A14) SPI0_CLK.EHRPWM1_A */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_clk_gpio: main-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0000, PIN_INPUT, 7) /* (H24) OSPI0_CLK.GPIO0_0 */ /* SODIMM 52 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io0_gpio: main-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */ /* SODIMM 56 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io1_gpio: main-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */ /* SODIMM 58 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io2_gpio: main-gpio0-5-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */ /* SODIMM 60 */
+		>;
+	};
+
+	/* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_io3_gpio: main-gpio0-6-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */ /* SODIMM 62 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */
+		>;
+	};
+
+	/* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */
+	pinctrl_qspi1_cs2_gpio: main-gpio0-12-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */ /* SODIMM 64 */
+		>;
+	};
+
+	/* WiFi_W_WKUP_HOST# */
+	pinctrl_wifi_w_wkup_host: main-gpio0-15-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */ /* SODIMM 174 */
+		>;
+	};
+
+	/* WiFi_BT_WKUP_HOST# */
+	pinctrl_bt_wkup_host: main-gpio0-16-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ /* SODIMM 172 */
+		>;
+	};
+
+	/* PMIC_ETH_RESET# */
+	pinctrl_eth_reset: main-gpio0-17-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0044, PIN_INPUT, 7) /* (N24) GPMC0_AD2.GPIO0_17 */
+		>;
+	};
+
+	/* PMIC_BRIDGE_RESET# */
+	pinctrl_bridge_reset: main-gpio0-20-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0050, PIN_INPUT, 7) /* (P22) GPMC0_AD5.GPIO0_20 */
+		>;
+	};
+
+	/* PMIC_VSEL_SD */
+	pinctrl_vsel_sd: main-gpio0-21-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0054, PIN_INPUT, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
+		>;
+	};
+
+	/* PMIC_EN_WIFI */
+	pinctrl_wifi_en: main-gpio0-22-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0058, PIN_INPUT, 7) /* (R23) GPMC0_AD7.GPIO0_22 */
+		>;
+	};
+
+	/* PMIC_ETH_INT# */
+	pinctrl_eth_int: main-gpio0-25-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0064, PIN_INPUT_PULLUP, 7) /* (T25) GPMC0_AD10.GPIO0_25 */
+		>;
+	};
+
+	/* WiFi_WKUP_BT# */
+	pinctrl_wifi_wkup_bt: main-gpio0-26-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0068, PIN_INPUT, 7) /* (R21) GPMC0_AD11.GPIO0_26 */
+		>;
+	};
+
+	/* WiFi_WKUP_WLAN# */
+	pinctrl_wifi_wkup_wlan: main-gpio0-27-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x006c, PIN_INPUT, 7) /* (T22) GPMC0_AD12.GPIO0_27 */
+		>;
+	};
+
+	/* Verdin SD_1_PWR_EN */
+	pinctrl_sd1_pwr_en: main-gpio0-29-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0074, PIN_INPUT, 7) /* (U25) GPMC0_AD14.GPIO0_29 */ /* SODIMM 76 */
+		>;
+	};
+
+	/* Verdin DSI_1_BKL_EN */
+	pinctrl_dsi1_bkl_en: main-gpio0-30-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0078, PIN_INPUT, 7) /* (U24) GPMC0_AD15.GPIO0_30 */ /* SODIMM 21 */
+		>;
+	};
+
+	/* Verdin CTRL_SLEEP_MOCI# */
+	pinctrl_ctrl_sleep_moci: main-gpio0-31-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x007c, PIN_INPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ /* SODIMM 256 */
+		>;
+	};
+
+	/* Verdin CTRL_WAKE1_MICO# */
+	pinctrl_ctrl_wake1_mico: main-gpio0-32-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */ /* SODIMM 252 */
+		>;
+	};
+
+	/* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_d_out_gpio: main-gpio0-34-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x008c, PIN_INPUT, 7) /* (L25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */
+		>;
+	};
+
+	/* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2 interface) */
+	pinctrl_i2s_2_bclk_gpio: main-gpio0-35-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0090, PIN_INPUT, 7) /* (M24) GPMC0_BE0n_CLE.GPIO0_35 */ /* SODIMM 42 */
+		>;
+	};
+
+	/* Verdin GPIO_6 */
+	pinctrl_gpio_6: main-gpio0-36-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0094, PIN_INPUT, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */ /* SODIMM 218 */
+		>;
+	};
+
+	/* Verdin ETH_2_RGMII_INT# */
+	pinctrl_eth2_rgmii_int: main-gpio0-38-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x009c, PIN_INPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */ /* SODIMM 189 */
+		>;
+	};
+
+	/* Verdin GPIO_5 */
+	pinctrl_gpio_5: main-gpio0-40-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */ /* SODIMM 216 */
+		>;
+	};
+
+	/* Verdin GPIO_7 */
+	pinctrl_gpio_7: main-gpio0-41-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */ /* SODIMM 220 */
+		>;
+	};
+
+	/* Verdin GPIO_8 */
+	pinctrl_gpio_8: main-gpio0-42-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */ /* SODIMM 222 */
+		>;
+	};
+
+	/* Verdin USB_1_OC# */
+	pinctrl_usb1_oc: main-gpio0-71-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0124, PIN_INPUT, 7) /* (A23) MMC2_SDCD.GPIO0_71 */ /* SODIMM 157 */
+		>;
+	};
+
+	/* Verdin USB_2_OC# */
+	pinctrl_usb2_oc: main-gpio0-72-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0128, PIN_INPUT, 7) /* (B23) MMC2_SDWP.GPIO0_72 */ /* SODIMM 187 */
+		>;
+	};
+
+	/* Verdin PWM_3_DSI as GPIO */
+	pinctrl_pwm3_dsi_gpio: main-gpio1-17-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01bc, PIN_INPUT, 7) /* (A14) SPI0_CLK.GPIO1_17 */ /* SODIMM 19 */
+		>;
+	};
+
+	/* Verdin QSPI_1_DQS as GPIO */
+	pinctrl_qspi1_dqs_gpio: main-gpio1-18-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c0, PIN_INPUT, 7) /* (B13) SPI0_D0.GPIO1_18 */ /* SODIMM 66 */
+		>;
+	};
+
+	/* Verdin USB_1_ID */
+	pinctrl_usb0_id: main-gpio1-19-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1.GPIO1_19 */ /* SODIMM 161 */
+		>;
+	};
+
+	/* Verdin DSI_1_INT# (pulled-up as active-low) */
+	pinctrl_dsi1_int: main-gpio1-49-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_INPUT_PULLUP, 7) /* (C17) MMC1_SDWP.GPIO1_49 */ /* SODIMM 17 */
+		>;
+	};
+
+	/* On-module I2C - PMIC_I2C */
+	pinctrl_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT, 0) /* (B16) I2C0_SCL */ /* PMIC_I2C_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT, 0) /* (A16) I2C0_SDA */ /* PMIC_I2C_SDA */
+		>;
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ /* SODIMM 14 */
+			AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */ /* SODIMM 12 */
+		>;
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c2: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */ /* SODIMM 55 */
+			AM62X_IOPAD(0x00b4, PIN_INPUT, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ /* SODIMM 53 */
+		>;
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c3: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d0, PIN_INPUT, 2) /* (A15) UART0_CTSn.I2C3_SCL */ /* SODIMM 95 */
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 2) /* (B15) UART0_RTSn.I2C3_SDA */ /* SODIMM 93 */
+		>;
+	};
+
+	/* I2S_1_MCLK */
+	pinctrl_i2s1_mclk: main-system-audio-ext-reflock1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */ /* SODIMM 38 */
+		>;
+	};
+
+	/* Verdin I2S_1 */
+	pinctrl_mcasp0: main-mcasp0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01a4, PIN_INPUT,  0) /* (B20) MCASP0_ACLKX */ /* SODIMM 30 */
+			AM62X_IOPAD(0x01a8, PIN_INPUT,  0) /* (D20) MCASP0_AFSX  */ /* SODIMM 32 */
+			AM62X_IOPAD(0x01a0, PIN_OUTPUT, 0) /* (E18) MCASP0_AXR0  */ /* SODIMM 34 */
+			AM62X_IOPAD(0x019c, PIN_INPUT,  0) /* (B18) MCASP0_AXR1  */ /* SODIMM 36 */
+		>;
+	};
+
+	/* Verdin I2S_2 */
+	pinctrl_mcasp1: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0090, PIN_INPUT,  2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */ /* SODIMM 42 */
+			AM62X_IOPAD(0x0098, PIN_INPUT,  2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX     */ /* SODIMM 44 */
+			AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0       */ /* SODIMM 46 */
+			AM62X_IOPAD(0x0088, PIN_INPUT,  2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1   */ /* SODIMM 48 */
+		>;
+	};
+
+	/* Verdin CAN_1 */
+	pinctrl_mcan0: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01dc, PIN_INPUT,  0) /* (E15) MCAN0_RX */ /* SODIMM 22 */
+			AM62X_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */ /* SODIMM 20 */
+		>;
+	};
+
+	/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+	pinctrl_mdio: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC  */ /* ETH_1_MDC,  SODIMM 193 */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0)  /* (AB22) MDIO0_MDIO */ /* ETH_1_MDIO, SODIMM 191 */
+		>;
+	};
+
+	/* On-module eMMC */
+	pinctrl_sdhci0: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /*  (Y3) MMC0_CMD  */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK  */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /*  (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	/* Verdin SD_1 */
+	pinctrl_sdhci1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT,        0) /* (A21) MMC1_CMD  */ /* SODIMM 74 */
+			AM62X_IOPAD(0x234, PIN_INPUT,        0) /* (B22) MMC1_CLK  */ /* SODIMM 78 */
+			AM62X_IOPAD(0x230, PIN_INPUT,        0) /* (A22) MMC1_DAT0 */ /* SODIMM 80 */
+			AM62X_IOPAD(0x22c, PIN_INPUT,        0) /* (B21) MMC1_DAT1 */ /* SODIMM 82 */
+			AM62X_IOPAD(0x228, PIN_INPUT,        0) /* (C21) MMC1_DAT2 */ /* SODIMM 70 */
+			AM62X_IOPAD(0x224, PIN_INPUT,        0) /* (D22) MMC1_DAT3 */ /* SODIMM 72 */
+			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */ /* SODIMM 84 */
+		>;
+	};
+
+	/* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */
+	pinctrl_sdhci2: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x120, PIN_INPUT, 0) /* (C24) MMC2_CMD   */ /* WiFi_SDIO_CMD   */
+			AM62X_IOPAD(0x118, PIN_INPUT, 0) /* (D25) MMC2_CLK   */ /* WiFi_SDIO_CLK   */
+			AM62X_IOPAD(0x114, PIN_INPUT, 0) /* (B24) MMC2_DAT0  */ /* WiFi_SDIO_DATA0 */
+			AM62X_IOPAD(0x110, PIN_INPUT, 0) /* (C25) MMC2_DAT1  */ /* WiFi_SDIO_DATA1 */
+			AM62X_IOPAD(0x10c, PIN_INPUT, 0) /* (E23) MMC2_DAT2  */ /* WiFi_SDIO_DATA2 */
+			AM62X_IOPAD(0x108, PIN_INPUT, 0) /* (D24) MMC2_DAT3  */ /* WiFi_SDIO_DATA3 */
+			AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+		>;
+	};
+
+	/* Verdin QSPI_1 */
+	pinctrl_ospi0: main-ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK  */ /* SODIMM 52 */
+			AM62X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */ /* SODIMM 54 */
+			AM62X_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G21) OSPI0_CSn1 */ /* SODIMM 64 */
+			AM62X_IOPAD(0x000c, PIN_INPUT, 0)  /* (E25) OSPI0_D0   */ /* SODIMM 56 */
+			AM62X_IOPAD(0x0010, PIN_INPUT, 0)  /* (G24) OSPI0_D1   */ /* SODIMM 58 */
+			AM62X_IOPAD(0x0014, PIN_INPUT, 0)  /* (F25) OSPI0_D2   */ /* SODIMM 60 */
+			AM62X_IOPAD(0x0018, PIN_INPUT, 0)  /* (F24) OSPI0_D3   */ /* SODIMM 62 */
+		>;
+	};
+
+	/* Verdin ETH_1 RGMII (On-module PHY) */
+	pinctrl_rgmii1: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT,  0) /* (AB17) RGMII1_RD0    */
+			AM62X_IOPAD(0x150, PIN_INPUT,  0) /* (AC17) RGMII1_RD1    */
+			AM62X_IOPAD(0x154, PIN_INPUT,  0) /* (AB16) RGMII1_RD2    */
+			AM62X_IOPAD(0x158, PIN_INPUT,  0) /* (AA15) RGMII1_RD3    */
+			AM62X_IOPAD(0x148, PIN_INPUT,  0) /* (AD17) RGMII1_RXC    */
+			AM62X_IOPAD(0x144, PIN_INPUT,  0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0    */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1    */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2    */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3    */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC    */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	/* Verdin ETH_2 RGMII */
+	pinctrl_rgmii2: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT,  0) /* (AE23) RGMII2_RD0    */ /* SODIMM 201 */
+			AM62X_IOPAD(0x188, PIN_INPUT,  0) /* (AB20) RGMII2_RD1    */ /* SODIMM 203 */
+			AM62X_IOPAD(0x18c, PIN_INPUT,  0) /* (AC21) RGMII2_RD2    */ /* SODIMM 205 */
+			AM62X_IOPAD(0x190, PIN_INPUT,  0) /* (AE22) RGMII2_RD3    */ /* SODIMM 207 */
+			AM62X_IOPAD(0x180, PIN_INPUT,  0) /* (AD23) RGMII2_RXC    */ /* SODIMM 197 */
+			AM62X_IOPAD(0x17c, PIN_INPUT,  0) /* (AD22) RGMII2_RX_CTL */ /* SODIMM 199 */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /*  (Y18) RGMII2_TD0    */ /* SODIMM 221 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1    */ /* SODIMM 219 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2    */ /* SODIMM 217 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3    */ /* SODIMM 215 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC    */ /* SODIMM 213 */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */ /* SODIMM 211 */
+		>;
+	};
+
+	/* Verdin SPI_1 */
+	pinctrl_spi1: main-spi1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */
+			AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */
+			AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0  */ /* SODIMM 200 */
+			AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1  */ /* SODIMM 198 */
+		>;
+	};
+
+	/* ETH_25MHz_CLK */
+	pinctrl_eth_clock: main-system-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f0, PIN_OUTPUT_PULLUP, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+		>;
+	};
+
+	/* PMIC_EXTINT# */
+	pinctrl_pmic_extint: main-system-extint-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
+		>;
+	};
+
+	/* Verdin UART_3, used as the Linux console */
+	pinctrl_uart0: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT_PULLUP, 0) /* (D14) UART0_RXD */ /* SODIMM 147 */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT,       0) /* (E14) UART0_TXD */ /* SODIMM 149 */
+		>;
+	};
+
+	/* Verdin UART_1 */
+	pinctrl_uart1: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0194, PIN_INPUT_PULLUP, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */ /* SODIMM 135 */
+			AM62X_IOPAD(0x0198, PIN_OUTPUT,       2) /* (A19) MCASP0_AXR2.UART1_RTSn */ /* SODIMM 133 */
+			AM62X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 2) /* (E19) MCASP0_AFSR.UART1_RXD  */ /* SODIMM 129 */
+			AM62X_IOPAD(0x01b0, PIN_OUTPUT,       2) /* (A20) MCASP0_ACLKR.UART1_TXD */ /* SODIMM 131 */
+		>;
+	};
+
+	/* Bluetooth on WB SKUs, module-specific UART otherwise */
+	pinctrl_uart5: main-uart5-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0008, PIN_INPUT_PULLUP, 5) /* (J24) OSPI0_DQS.UART5_CTSn    */ /* WiFi_UART_CTS */
+			AM62X_IOPAD(0x0004, PIN_OUTPUT,       5) /* (G25) OSPI0_LBCLKO.UART5_RTSn */ /* WiFi_UART_RTS */
+			AM62X_IOPAD(0x0034, PIN_INPUT_PULLUP, 5) /* (H21) OSPI0_CSn2.UART5_RXD    */ /* WiFi_UART_RXD */
+			AM62X_IOPAD(0x0038, PIN_OUTPUT,       5) /* (E24) OSPI0_CSn3.UART5_TXD    */ /* WiFi_UART_TXD */
+		>;
+	};
+
+	/* Verdin USB_1 */
+	pinctrl_usb0: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0254, PIN_OUTPUT, 0) /* (C20) USB0_DRVVBUS */ /* SODIMM 155 */
+		>;
+	};
+
+	/* Verdin USB_2 */
+	pinctrl_usb1: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */ /* SODIMM 185 */
+		>;
+	};
+
+	/* DSS VOUT0 RGB */
+	pinctrl_parallel_rgb: main-vout-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC            */
+			AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC            */
+			AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK             */
+			AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /*  (Y20) VOUT0_DE               */
+			AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /*  (U22) VOUT0_DATA0            */
+			AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /*  (V24) VOUT0_DATA1            */
+			AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /*  (W25) VOUT0_DATA2            */
+			AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /*  (W24) VOUT0_DATA3            */
+			AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /*  (Y25) VOUT0_DATA4            */
+			AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /*  (Y24) VOUT0_DATA5            */
+			AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /*  (Y23) VOUT0_DATA6            */
+			AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7            */
+			AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /*  (V21) VOUT0_DATA8            */
+			AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /*  (W21) VOUT0_DATA9            */
+			AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /*  (V20) VOUT0_DATA10           */
+			AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11           */
+			AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12           */
+			AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13           */
+			AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /*  (Y22) VOUT0_DATA14           */
+			AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15           */
+			AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /*  (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /*  (R25) GPMC0_AD9.VOUT0_DATA17 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	/* Verdin PCIE_1_RESET# */
+	pinctrl_pcie_1_reset: mcu-gpio0-0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0000, PIN_INPUT, 7) /* (E8) MCU_SPI0_CS0.MCU_GPIO0_0 */ /* SODIMM 244 */
+		>;
+	};
+
+	/* Verdin GPIO_1 */
+	pinctrl_gpio_1: mcu-gpio0-1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0004, PIN_INPUT, 7) /* (B8) MCU_SPI0_CS1.MCU_GPIO0_1 */ /* SODIMM 206 */
+		>;
+	};
+
+	/* Verdin GPIO_2 */
+	pinctrl_gpio_2: mcu-gpio0-2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0008, PIN_INPUT, 7) /* (A7) MCU_SPI0_CLK.MCU_GPIO0_2 */ /* SODIMM 208 */
+		>;
+	};
+
+	/* Verdin GPIO_3 */
+	pinctrl_gpio_3: mcu-gpio0-3-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x000c, PIN_INPUT, 7) /* (D9) MCU_SPI0_D0.MCU_GPIO0_3 */ /* SODIMM 210 */
+		>;
+	};
+
+	/* Verdin GPIO_4 */
+	pinctrl_gpio_4: mcu-gpio0-4-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0010, PIN_INPUT, 7) /* (C9) MCU_SPI0_D1.MCU_GPIO0_4 */ /* SODIMM 212 */
+		>;
+	};
+
+	/* Verdin I2C_3_HDMI */
+	pinctrl_mcu_i2c0: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /*  (A8) MCU_I2C0_SCL */ /* SODIMM 59 */
+			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */ /* SODIMM 57 */
+		>;
+	};
+
+	/* Verdin CAN_2 */
+	pinctrl_mcu_mcan0: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0038, PIN_INPUT,  0) /* (B3) MCU_MCAN0_RX */ /* SODIMM 26 */
+			AM62X_MCU_IOPAD(0x0034, PIN_OUTPUT, 0) /* (D6) MCU_MCAN0_TX */ /* SODIMM 24 */
+		>;
+	};
+
+	/* Verdin UART_4 - Reserved to Cortex-M4 */
+	pinctrl_mcu_uart0: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0014, PIN_INPUT_PULLUP, 0) /* (B5) MCU_UART0_RXD */ /* SODIMM 151 */
+			AM62X_MCU_IOPAD(0x0018, PIN_OUTPUT,       0) /* (A5) MCU_UART0_TXD */ /* SODIMM 153 */
+		>;
+	};
+
+	/* Verdin CSI_1_MCLK */
+	pinctrl_csi1_mclk: wkup-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */ /* SODIMM 91 */
+		>;
+	};
+
+	/* Verdin UART_2 */
+	pinctrl_wkup_uart0: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x002c, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_UART0_CTSn */ /* SODIMM 143 */
+			AM62X_MCU_IOPAD(0x0030, PIN_OUTPUT,       0) /* (A4) WKUP_UART0_RTSn */ /* SODIMM 141 */
+			AM62X_MCU_IOPAD(0x0024, PIN_INPUT_PULLUP, 0) /* (B4) WKUP_UART0_RXD  */ /* SODIMM 137 */
+			AM62X_MCU_IOPAD(0x0028, PIN_OUTPUT,       0) /* (C5) WKUP_UART0_TXD  */ /* SODIMM 139 */
+		>;
+	};
+};
+
+/* VERDIN I2S_1_MCLK */
+&audio_refclk1 {
+	assigned-clock-rates = <25000000>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+	status = "disabled";
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&cpsw_port1 {
+	phy-handle = <&cpsw3g_phy0>;
+	phy-mode = "rgmii-rxid";
+	status = "disabled";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+	status = "disabled";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+	assigned-clocks = <&k3_clks 157 20>;
+	assigned-clock-parents = <&k3_clks 157 22>;
+	assigned-clock-rates = <25000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eth_clock>, <&pinctrl_mdio>;
+	status = "disabled";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id2000.a231";
+		reg = <0>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>, <&pinctrl_eth_reset>;
+		reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10>;
+		reset-deassert-us = <1000>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_parallel_rgb>;
+	status = "disabled";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&rgb_in>;
+		};
+	};
+};
+
+/* Verdin PWM_1, PWM_2 */
+&epwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm0_a>, <&pinctrl_epwm0_b>;
+	status = "disabled";
+};
+
+/* Verdin PWM_3_DSI */
+&epwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epwm1_a>;
+	status = "disabled";
+};
+
+&main_gpio0 {
+	gpio-line-names =
+		"SODIMM_52", /* 0 */
+		"",
+		"",
+		"SODIMM_56",
+		"SODIMM_58",
+		"SODIMM_60",
+		"SODIMM_62",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"SODIMM_54",
+		"SODIMM_64",
+		"",
+		"",
+		"SODIMM_174",
+		"SODIMM_172",
+		"",
+		"",
+		"",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_76",
+		"SODIMM_21", /* 30 */
+		"SODIMM_256",
+		"SODIMM_252",
+		"",
+		"SODIMM_46",
+		"SODIMM_42",
+		"SODIMM_218",
+		"",
+		"SODIMM_189",
+		"",
+		"SODIMM_216", /* 40 */
+		"SODIMM_220",
+		"SODIMM_222",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"SODIMM_157",
+		"SODIMM_187",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	verdin_ctrl_sleep_moci: ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <31 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+	};
+};
+
+&main_gpio1 {
+	gpio-line-names =
+		"", /* 0 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 10 */
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_15",
+		"SODIMM_16",
+		"SODIMM_19",
+		"SODIMM_66",
+		"SODIMM_161",
+		"", /* 20 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 30 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 40 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SODIMM_17",
+		"", /* 50 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 60 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 70 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"", /* 80 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+/* On-module I2C - PMIC_I2C */
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	dsi_bridge: dsi@e {
+		compatible = "toshiba,tc358778";
+		reg = <0xe>;
+		assigned-clocks = <&k3_clks 157 20>;
+		assigned-clock-parents = <&k3_clks 157 22>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bridge_reset>;
+		clocks = <&k3_clks 157 20>;
+		clock-names = "refclk";
+		reset-gpios = <&main_gpio0 20 GPIO_ACTIVE_LOW>;
+		vddc-supply = <&reg_1v2_dsi>;
+		vddmipi-supply = <&reg_1v2_dsi>;
+		vddio-supply = <&reg_1v8_dsi>;
+		status = "disabled";
+
+		dsi_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				rgb_in: endpoint {
+					data-lines = <18>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic_extint>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+
+		buck1-supply = <&reg_vsodimm>;
+		buck2-supply = <&reg_vsodimm>;
+		buck3-supply = <&reg_vsodimm>;
+		ldo1-supply = <&reg_3v3>;
+		ldo2-supply = <&reg_1v8>;
+		ldo3-supply = <&reg_3v3>;
+		ldo4-supply = <&reg_3v3>;
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			reg_vdd_core: buck1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+VDD_CORE (PMIC BUCK1)";
+			};
+
+			reg_1v8: buck2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8 (PMIC BUCK2)"; /* On-module and SODIMM 214 */
+			};
+
+			reg_vdd_ddr: buck3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "+VDD_DDR (PMIC BUCK3)";
+			};
+
+			reg_sd_3v3_1v8: ldo1 {
+				regulator-allow-bypass;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3_1.8_SD (PMIC LDO1)";
+			};
+
+			reg_vddr_core: ldo2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+VDDR_CORE (PMIC LDO2)";
+			};
+
+			reg_1v8a: ldo3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A (PMIC LDO3)";
+			};
+
+			reg_eth_2v5: ldo4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2500000>;
+				regulator-min-microvolt = <2500000>;
+				regulator-name = "+V2.5_ETH (PMIC LDO4)";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin PMIC_I2C (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin PMIC_I2C ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+/* Verdin I2C_2_DSI */
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "disabled";
+};
+
+/* Verdin I2C_4_CSI */
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcan0>;
+	status = "disabled";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	ti,pindir-d0-out-d1-in;
+	status = "disabled";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "disabled";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "disabled";
+};
+
+/* Verdin I2S_1 */
+&mcasp0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp0>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <32>;
+	tx-num-evt = <32>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+/* Verdin I2S_2 */
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcasp1>;
+	op-mode = <0>; /* I2S mode */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 2 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tdm-slots = <2>;
+	rx-num-evt = <32>;
+	tx-num-evt = <32>;
+	#sound-dai-cells = <0>;
+	status = "disabled";
+};
+
+/* Verdin I2C_3_HDMI */
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_i2c0>;
+	status = "disabled";
+};
+
+&mcu_gpio0 {
+	gpio-line-names =
+		"SODIMM_244",
+		"SODIMM_206",
+		"SODIMM_208",
+		"SODIMM_210",
+		"SODIMM_212",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+/* Verdin CAN_2 */
+&mcu_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_mcan0>;
+	status = "disabled";
+};
+
+/* Verdin UART_4 - Cortex-M4 UART */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcu_uart0>;
+	status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ospi0>;
+	status = "disabled";
+};
+
+/* On-module eMMC */
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1>;
+	disable-wp;
+	ti,driver-strength-ohm = <50>;
+	vmmc-supply = <&reg_sdhc1_vmmc>;
+	vqmmc-supply = <&reg_sdhc1_vqmmc>;
+	status = "disabled";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+/* TODO: role swich using ID pin */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>;
+	status = "disabled";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+	ti,vbus-divider;
+	status = "disabled";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	dr_mode = "host";
+	status = "disabled";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wkup_uart0>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
new file mode 100644
index 000000000..eae052887
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: syscon@43000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 4>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
new file mode 100644
index 000000000..11f14eef2
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62 SoC Family
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM625 SoC";
+	compatible = "ti,am625";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
+		};
+
+		cbass_wakeup: bus@b00000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+		};
+	};
+
+	dss_vp1_clk: clock-divider-oldi {
+		compatible = "fixed-factor-clock";
+		clocks = <&k3_clks 186 0>;
+		#clock-cells = <0>;
+		clock-div = <7>;
+		clock-mult = <1>;
+	};
+
+	#include "k3-am62-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am62-main.dtsi"
+#include "k3-am62-mcu.dtsi"
+#include "k3-am62-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
new file mode 100644
index 000000000..2de74428a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleplay.org/
+ *
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "k3-am625.dtsi"
+
+/ {
+	compatible = "beagle,am625-beagleplay", "ti,am625";
+	model = "BeagleBoard.org BeaglePlay";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		gpio0 = &main_gpio0;
+		gpio1 = &main_gpio1;
+		gpio2 = &mcu_gpio0;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c3;
+		i2c4 = &wkup_i2c0;
+		i2c5 = &mcu_i2c0;
+		mdio-gpio0 = &mdio0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		rtc0 = &rtc;
+		serial0 = &main_uart5;
+		serial1 = &main_uart6;
+		serial2 = &main_uart0;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops: ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	vsys_5v0: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3: regulator-2 {
+		/* output of TLV62595DMQR-U12 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wlan_en: regulator-3 {
+		/* OUTPUT of SN74AVC2T244DQMR */
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio0 38 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_pins_default>;
+	};
+
+	vdd_3v3_sd: regulator-4 {
+		/* output of TPS22918DBVR-U21 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_3v3_sd_pins_default>;
+
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&vdd_3v3>;
+		gpio = <&main_gpio1 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-5 {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_hs200_switch";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&ldo1_reg>;
+		gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			default-state = "keep";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 5 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 6 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_LAN;
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 9 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_button_pins_default>;
+
+		usr: button-usr {
+			label = "User Key";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&it66121_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "it66121 HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
+		simple-audio-card,frame-master = <&hdmi_dailink_master>;
+
+		hdmi_dailink_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&it66121>;
+		};
+	};
+
+	/* Workaround for errata i2329 - just use mdio bitbang */
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdio0_pins_default>;
+		gpios = <&main_gpio0 86 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&main_gpio0 85 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpsw3g_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		cpsw3g_phy1: ethernet-phy@1 {
+			reg = <1>;
+			reset-gpios = <&main_gpio1 5 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <25>;
+			reset-deassert-us = <60000>; /* T2 */
+		};
+	};
+};
+
+&main_pmx0 {
+	gpio0_pins_default: gpio0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0004, PIN_INPUT, 7) /* (G25) OSPI0_LBCLKO.GPIO0_1 */
+			AM62X_IOPAD(0x0008, PIN_INPUT, 7) /* (J24) OSPI0_DQS.GPIO0_2 */
+			AM62X_IOPAD(0x000c, PIN_INPUT, 7) /* (E25) OSPI0_D0.GPIO0_3 */
+			AM62X_IOPAD(0x0010, PIN_INPUT, 7) /* (G24) OSPI0_D1.GPIO0_4 */
+			AM62X_IOPAD(0x0014, PIN_INPUT, 7) /* (F25) OSPI0_D2.GPIO0_5 */
+			AM62X_IOPAD(0x0018, PIN_INPUT, 7) /* (F24) OSPI0_D3.GPIO0_6 */
+			AM62X_IOPAD(0x0024, PIN_INPUT, 7) /* (H25) OSPI0_D6.GPIO0_9 */
+			AM62X_IOPAD(0x0028, PIN_INPUT, 7) /* (J22) OSPI0_D7.GPIO0_10 */
+			AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */
+			AM62X_IOPAD(0x0030, PIN_INPUT, 7) /* (G21) OSPI0_CSn1.GPIO0_12 */
+			AM62X_IOPAD(0x0034, PIN_INPUT, 7) /* (H21) OSPI0_CSn2.GPIO0_13 */
+			AM62X_IOPAD(0x0038, PIN_INPUT, 7) /* (E24) OSPI0_CSn3.GPIO0_14 */
+			AM62X_IOPAD(0x00a4, PIN_INPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+			AM62X_IOPAD(0x00ac, PIN_INPUT, 7) /* (L21) GPMC0_CSn1.GPIO0_42 */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	usr_button_pins_default: usr-button-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0048, PIN_INPUT, 7) /* (N25) GPMC0_AD3.GPIO0_18 */
+		>;
+	};
+
+	grove_pins_default: grove-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	local_i2c_pins_default: local-i2c-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	i2c2_1v8_pins_default: i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	mdio0_pins_default: mdio0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0160, PIN_OUTPUT, 7) /* (AD24) MDIO0_MDC.GPIO0_86 */
+			AM62X_IOPAD(0x015c, PIN_INPUT, 7) /* (AB22) MDIO0_MDIO.GPIO0_85 */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x014c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+			AM62X_IOPAD(0x0150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+			AM62X_IOPAD(0x0154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+			AM62X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+			AM62X_IOPAD(0x0148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+			AM62X_IOPAD(0x0144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+			AM62X_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+			AM62X_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+			AM62X_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+			AM62X_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+			AM62X_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+		>;
+	};
+
+	emmc_pins_default: emmc-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x0208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x0204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x0200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x01fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x01f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c4, PIN_INPUT, 7) /* (B14) SPI0_D1_GPIO1_19 */
+		>;
+	};
+
+	sd_pins_default: sd-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+			AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+			AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+			AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+			AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+			AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */
+		>;
+	};
+
+	wifi_pins_default: wifi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */
+			AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */
+			AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */
+			AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */
+			AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */
+			AM62X_IOPAD(0x0108, PIN_INPUT, 0) /* (D24) MMC2_DAT3 */
+			AM62X_IOPAD(0x0124, PIN_INPUT, 0) /* (A23) MMC2_SDCD */
+			AM62X_IOPAD(0x11c, PIN_INPUT, 0) /* (#N/A) MMC2_CLKB */
+		>;
+	};
+
+	wifi_en_pins_default: wifi-en-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x009c, PIN_OUTPUT, 7) /* (V25) GPMC0_WAIT1.GPIO0_38 */
+		>;
+	};
+
+	wifi_wlirq_pins_default: wifi-wlirq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x00a8, PIN_INPUT, 7) /* (M21) GPMC0_CSn0.GPIO0_41 */
+		>;
+	};
+
+	spe_pins_default: spe-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0168, PIN_INPUT, 1) /* (AE21) RGMII2_TXC.RMII2_CRS_DV */
+			AM62X_IOPAD(0x0180, PIN_INPUT, 1) /* (AD23) RGMII2_RXC.RMII2_REF_CLK */
+			AM62X_IOPAD(0x0184, PIN_INPUT, 1) /* (AE23) RGMII2_RD0.RMII2_RXD0 */
+			AM62X_IOPAD(0x0188, PIN_INPUT, 1) /* (AB20) RGMII2_RD1.RMII2_RXD1 */
+			AM62X_IOPAD(0x017c, PIN_INPUT, 1) /* (AD22) RGMII2_RX_CTL.RMII2_RX_ER */
+			AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */
+			AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */
+			AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */
+			AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */
+			AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */
+			AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */
+		>;
+	};
+
+	mikrobus_i2c_pins_default: mikrobus-i2c-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A15) UART0_CTSn.I2C3_SCL */
+			AM62X_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (B15) UART0_RTSn.I2C3_SDA */
+		>;
+	};
+
+	mikrobus_uart_pins_default: mikrobus-uart-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d8, PIN_INPUT, 1) /* (C15) MCAN0_TX.UART5_RXD */
+			AM62X_IOPAD(0x01dc, PIN_OUTPUT, 1) /* (E15) MCAN0_RX.UART5_TXD */
+		>;
+	};
+
+	mikrobus_spi_pins_default: mikrobus-spi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01b0, PIN_INPUT, 1) /* (A20) MCASP0_ACLKR.SPI2_CLK */
+			AM62X_IOPAD(0x01ac, PIN_INPUT, 1) /* (E19) MCASP0_AFSR.SPI2_CS0 */
+			AM62X_IOPAD(0x0194, PIN_INPUT, 1) /* (B19) MCASP0_AXR3.SPI2_D0 */
+			AM62X_IOPAD(0x0198, PIN_INPUT, 1) /* (A19) MCASP0_AXR2.SPI2_D1 */
+		>;
+	};
+
+	mikrobus_gpio_pins_default: mikrobus-gpio-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */
+			AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (E18) MCASP0_AXR0.GPIO1_10 */
+			AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (D20) MCASP0_AFSX.GPIO1_12 */
+		>;
+	};
+
+	console_pins_default: console-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	wifi_debug_uart_pins_default: wifi-debug-uart-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x001c, PIN_INPUT, 3) /* (J23) OSPI0_D4.UART6_RXD */
+			AM62X_IOPAD(0x0020, PIN_OUTPUT, 3) /* (J25) OSPI0_D5.UART6_TXD */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_INPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	pmic_irq_pins_default: pmic-irq-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (D16) EXTINTn */
+		>;
+	};
+
+	hdmi_gpio_pins_default: hdmi-gpio-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0094, PIN_INPUT_PULLUP | PIN_DEBOUNCE_CONF6, 7) /* (N20) GPMC0_BE1n.GPIO0_36 */
+			AM62X_IOPAD(0x0054, PIN_OUTPUT_PULLUP, 7) /* (P21) GPMC0_AD6.GPIO0_21 */
+		>;
+	};
+
+	mcasp_hdmi_pins_default: mcasp-hdmi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0090, PIN_INPUT, 2) /* (M24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x0098, PIN_INPUT, 2) /* (U23) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x008c, PIN_OUTPUT, 2) /* (L25) GPMC0_WEn.MCASP1_AXR0 */
+			AM62X_IOPAD(0x0088, PIN_INPUT, 2) /* (L24) GPMC0_OEn_REn.MCASP1_AXR1 */
+			AM62X_IOPAD(0x0084, PIN_INPUT, 2) /* (L23) GPMC0_ADVn_ALE.MCASP1_AXR2 */
+			AM62X_IOPAD(0x007c, PIN_INPUT, 2) /* (P25) GPMC0_CLK.MCASP1_AXR3 */
+		>;
+	};
+
+	dss0_pins_default: dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+			AM62X_IOPAD(0x00f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x0104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x00fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x00b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x00bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x00c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x00c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x00c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x00cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x00d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x00d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x00d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x00dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x00e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x00e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x00e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x00ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x00f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x00f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x005c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x0060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+			AM62X_IOPAD(0x0064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+			AM62X_IOPAD(0x0068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+			AM62X_IOPAD(0x006c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62X_IOPAD(0x0070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+			AM62X_IOPAD(0x0074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+			AM62X_IOPAD(0x0078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	i2c_qwiic_pins_default: i2c-qwiic-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0044, PIN_INPUT, 0) /* (A8) MCU_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
+		>;
+	};
+
+	gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
+		>;
+	};
+
+	i2c_csi_pins_default: i2c-csi-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x004c, PIN_INPUT_PULLUP, 0) /* (B9) WKUP_I2C0_SCL */
+			AM62X_MCU_IOPAD(0x0050, PIN_INPUT_PULLUP, 0) /* (A9) WKUP_I2C0_SDA */
+		>;
+	};
+
+	wifi_32k_clk: mcu-clk-out-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (A12) WKUP_CLKOUT0 */
+		>;
+	};
+};
+
+&a53_opp_table {
+	/* Requires VDD_CORE to be at 0.85V */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+	};
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_csi_pins_default>;
+	clock-frequency = <400000>;
+	/* Enable with overlay for camera sensor */
+};
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c_qwiic_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&spe_pins_default>,
+		    <&gbe_pmx_obsclk>;
+	assigned-clocks = <&k3_clks 157 70>, <&k3_clks 157 20>;
+	assigned-clock-parents = <&k3_clks 157 72>, <&k3_clks 157 22>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rmii";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	/* Workaround for errata i2329 - Use mdio bitbang */
+	status = "disabled";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins_default>;
+	gpio-line-names = "BL_EN_3V3", "SPE_PO_EN", "RTC_INT",	/* 0-2 */
+		"USR0", "USR1", "USR2", "USR3", "", "", "USR4",	/* 3-9 */
+		"EEPROM_WP",					/* 10 */
+		"CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2",	/* 11-12 */
+		"CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "",	/* 13-17 */
+		"USR_BUTTON", "", "", "", "", "", "", "", "",	/* 18-26 */
+		"", "", "", "", "", "", "", "", "", "HDMI_INT",	/* 27-36 */
+		"", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */
+		"", "", "", "", "", "", "", "", "", "", "", "",	/* 43-54 */
+		"", "", "", "", "", "", "", "", "", "", "", "", /* 55-66 */
+		"", "", "", "", "", "", "", "", "", "", "", "", /* 67-78 */
+		"", "", "", "", "", "",				/* 79-84 */
+		"BITBANG_MDIO_DATA", "BITBANG_MDIO_CLK",	/* 85-86 */
+		"", "", "", "", "";				/* 87-91 */
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_gpio_pins_default>;
+	gpio-line-names = "", "", "", "", "",			/* 0-4 */
+		"SPE_RSTN", "SPE_INTN", "MIKROBUS_GPIO1_7",	/* 5-7 */
+		"MIKROBUS_GPIO1_8", "MIKROBUS_GPIO1_9",		/* 8-9 */
+		"MIKROBUS_GPIO1_10", "MIKROBUS_GPIO1_11",	/* 10-11 */
+		"MIKROBUS_GPIO1_12", "MIKROBUS_W1_GPIO0",	/* 12-13 */
+		"MIKROBUS_GPIO1_14",				/* 14 */
+		"", "", "", "", "VDD_3V3_SD", "", "",		/* 15-21 */
+		"MIKROBUS_GPIO1_22", "MIKROBUS_GPIO1_23",	/* 22-23 */
+		"MIKROBUS_GPIO1_24", "MIKROBUS_GPIO1_25",	/* 24-25 */
+		"", "", "", "", "", "", "", "", "", "", "", "",	/* 26-37 */
+		"", "", "", "", "", "", "", "", "", "",		/* 38-47 */
+		"SD_CD", "SD_VOLT_SEL", "", "";			/* 48-51 */
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&local_i2c_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "ti,bq32000";
+		reg = <0x68>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	tps65219: pmic@30 {
+		compatible = "ti,tps65219";
+		reg = <0x30>;
+		buck1-supply = <&vsys_5v0>;
+		buck2-supply = <&vsys_5v0>;
+		buck3-supply = <&vsys_5v0>;
+		ldo1-supply = <&vdd_3v3>;
+		ldo2-supply = <&buck2_reg>;
+		ldo3-supply = <&vdd_3v3>;
+		ldo4-supply = <&vdd_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		system-power-controller;
+		ti,power-button;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "VDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/*
+				 * Regulator is left as is unused, vdd_sd
+				 * is controlled via GPIO with bypass config
+				 * as per the NVM configuration
+				 */
+				regulator-name = "VDD_SD_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-allow-bypass;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "VDDA_0V85";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "VDDA_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "VDD_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&grove_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_1v8_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	it66121: bridge-hdmi@4c {
+		compatible = "ite,it66121";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_gpio_pins_default>;
+		vcn33-supply = <&vdd_3v3>;
+		vcn18-supply = <&buck2_reg>;
+		vrf12-supply = <&buck3_reg>;
+		reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <36 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <24>;
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				it66121_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_i2c_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_spi_pins_default>;
+	status = "okay";
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins_default>;
+
+	vmmc-supply = <&vdd_3v3_sd>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
+	cd-debounce-delay-ms = <100>;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&sdhci2 {
+	vmmc-supply = <&wlan_en>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
+	bus-width = <4>;
+	non-removable;
+	ti,fails-without-test-cd;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,driver-strength-ohm = <50>;
+	assigned-clocks = <&k3_clks 157 158>;
+	assigned-clock-parents = <&k3_clks 157 160>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1807";
+		reg = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wlirq_pins_default>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <41 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&console_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikrobus_uart_pins_default>;
+	status = "okay";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_debug_uart_pins_default>;
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss0_pins_default>;
+};
+
+&dss_ports {
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&it66121_in>;
+		};
+	};
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp_hdmi_pins_default>;
+	auxclk-fs-ratio = <2177>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
new file mode 100644
index 000000000..a438baf54
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 - 2023 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phyboard-am62x
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am625.dtsi"
+#include "k3-am62-phycore-som.dtsi"
+
+/ {
+	compatible = "phytec,am625-phyboard-lyra-rdk",
+		     "phytec,am62-phycore-som", "ti,am625";
+	model = "PHYTEC phyBOARD-Lyra AM625";
+
+	aliases {
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		mmc1 = &sdhci1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	can_tc1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+
+		key-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		key-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
+
+		led-1 {
+			gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	vcc_3v3_mmc: regulator-vcc-3v3-mmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_MMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	gpio_keys_pins_default: gpio-keys-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+
+	gpio_exp_int_pins_default: gpio-exp-int-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
+			AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
+		>;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	user_leds_pins_default: user-leds-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy3>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy3: ethernet-phy@3 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	gpio_exp: gpio-expander@21 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_exp_int_pins_default>;
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 0>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN",
+				  "GPIO2_LED2", "GPIO3_LVDS_GPIO",
+				  "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
+				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x51>;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&can_tc1>;
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	/* Main UART1 may be used by TIFS firmware */
+	status = "okay";
+};
+
+&sdhci1 {
+	vmmc-supply = <&vcc_3v3_mmc>;
+	vqmmc-supply = <&vddshv5_sdio>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usbss1 {
+	ti,vbus-divider;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
new file mode 100644
index 000000000..7c98c1b85
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM625 SK: https://www.ti.com/lit/zip/sprr448
+ *
+ * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	compatible = "ti,am625-sk", "ti,am625";
+	model = "Texas Instruments AM625 SK";
+
+	opp-table {
+		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of LM34936 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-4 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v0>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
+		>;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+	};
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "WL_LT_EN",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
+				   "CSI_GPIO2", "PRU_3V3_EN",
+				   "HDMI_INTn", "PD_I2C_IRQ",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "TSINT#", "IO_EXP_TEST_LED";
+
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+	};
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&tlv320aic3106 {
+	DVDD-supply = <&vcc_1v8>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000..d38bfef29
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Dahlia Board";
+	compatible = "toradex,verdin-am62-nonwifi-dahlia",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000..31d2a3066
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Verdin Development Board";
+	compatible = "toradex,verdin-am62-nonwifi-dev",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts
new file mode 100644
index 000000000..e80332e1f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 on Yavia Board";
+	compatible = "toradex,verdin-am62-nonwifi-yavia",
+		     "toradex,verdin-am62-nonwifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000..3850a706e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/dahlia-carrier-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Dahlia Board";
+	compatible = "toradex,verdin-am62-wifi-dahlia",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts
new file mode 100644
index 000000000..4b657d6d3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/verdin-development-board-kit
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Verdin Development Board";
+	compatible = "toradex,verdin-am62-wifi-dev",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts
new file mode 100644
index 000000000..8a2506068
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2023 Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/yavia
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-yavia.dtsi"
+
+/ {
+	model = "Toradex Verdin AM62 WB on Yavia Board";
+	compatible = "toradex,verdin-am62-wifi-yavia",
+		     "toradex,verdin-am62-wifi",
+		     "toradex,verdin-am62",
+		     "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi
new file mode 100644
index 000000000..4193c2b3e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruiv7
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 135 0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 136 0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 137 0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&a53_opp_table>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	a53_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		opp-shared;
+		syscon = <&wkup_conf>;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-supported-hw = <0x01 0x0007>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-supported-hw = <0x01 0x0006>;
+			clock-latency-ns = <6000000>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+			opp-suspend;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
new file mode 100644
index 000000000..de36abb24
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -0,0 +1,819 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x10000>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_conf: syscon@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x20000>;
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4130 {
+			compatible = "ti,am62-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			reg-names = "target_data", "rt", "scfg";
+			#mbox-cells = <1>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <6 70 34>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>; /* SAUL_TX_1_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>; /* RING_SAUL_TX_1_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>; /* SAUL_RX_3_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+		reg-names = "debug_messages";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 2>;
+		assigned-clock-parents = <&k3_clks 37 3>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 2>;
+		assigned-clock-parents = <&k3_clks 38 3>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 2>;
+		assigned-clock-parents = <&k3_clks 39 3>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 2>;
+		assigned-clock-parents = <&k3_clks 40 3>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 2>;
+		assigned-clock-parents = <&k3_clks 41 3>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 2>;
+		assigned-clock-parents = <&k3_clks 42 3>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 2>;
+		assigned-clock-parents = <&k3_clks 43 3>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <92>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <52>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am62-sdhci";
+		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		bus-width = <4>;
+		no-1-8-v;
+		status = "disabled";
+	};
+
+	usbss0: dwc3-usb@f900000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f900000 0x00 0x800>;
+		clocks = <&k3_clks 161 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb0: usb@31000000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31000000 0x00 0x50000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: dwc3-usb@f910000 {
+		compatible = "ti,am62-usb";
+		reg = <0x00 0x0f910000 0x00 0x800>;
+		clocks = <&k3_clks 162 3>;
+		clock-names = "ref";
+		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31100000 {
+			compatible = "snps,dwc3";
+			reg = <0x00 0x31100000 0x00 0x50000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
+			interrupt-names = "host", "peripheral";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 75 7>;
+			assigned-clocks = <&k3_clks 75 7>;
+			assigned-clock-parents = <&k3_clks 75 8>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x8000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 3>;
+		assigned-clock-parents = <&k3_clks 13 11>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		dmas = <&main_pktdma 0xc600 15>,
+		       <&main_pktdma 0xc601 15>,
+		       <&main_pktdma 0xc602 15>,
+		       <&main_pktdma 0xc603 15>,
+		       <&main_pktdma 0xc604 15>,
+		       <&main_pktdma 0xc605 15>,
+		       <&main_pktdma 0xc606 15>,
+		       <&main_pktdma 0xc607 15>,
+		       <&main_pktdma 0x4600 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&wkup_conf 0x200>;
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 13 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster1: mailbox@29010000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29010000 0x00 0x200>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster2: mailbox@29020000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29020000 0x00 0x200>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	mailbox0_cluster3: mailbox@29030000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29030000 0x00 0x200>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti4: watchdog@e040000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e040000 0x00 0x100>;
+		clocks = <&k3_clks 205 0>;
+		power-domains = <&k3_pds 205 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 205 0>;
+		assigned-clock-parents = <&k3_clks 205 2>;
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23000000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23010000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23020000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23100000 0x00 0x100>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23110000 0x00 0x100>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x00 0x23120000 0x00 0x100>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
new file mode 100644
index 000000000..a6d16a940
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+		status = "disabled";
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x04201000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <24>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+		/* Tightly coupled to M4F */
+		status = "reserved";
+	};
+
+	mcu_mcan0: can@4e08000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e08000 0x00 0x200>,
+		      <0x00 0x4e00000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 6>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@4e18000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x4e18000 0x00 0x200>,
+		      <0x00 0x4e10000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 6>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
new file mode 100644
index 000000000..85ce54563
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main2_thermal: main2-thermal {
+	       polling-delay-passive = <250>;	/* milliSeconds */
+	       polling-delay = <500>;		/* milliSeconds */
+	       thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			main2_crit: main2-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
new file mode 100644
index 000000000..4e8279fa0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: syscon@43000000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 4>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	wkup_rtc0: rtc@2b1f0000 {
+		compatible = "ti,am62-rtc";
+		reg = <0x00 0x2b1f0000 0x00 0x100>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
+		clock-names = "vbus", "osc32k";
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		wakeup-source;
+		status = "disabled";
+	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
+
+	wkup_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
new file mode 100644
index 000000000..61a210ecd
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A SoC Family
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM62A SoC";
+	compatible = "ti,am62a7";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x00 0x7e000000 0x00 0x7e000000 0x00 0x00100000>, /* C7x_0 */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+			 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+			 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+			 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU R5 IRAM0 */
+			 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>, /* MCU R5 IRAM1 */
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM */
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM */
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
+				 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+				 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+				 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
+				 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+		};
+
+		cbass_wakeup: bus@b00000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+		};
+	};
+
+	#include "k3-am62a-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am62a-main.dtsi"
+#include "k3-am62a-mcu.dtsi"
+#include "k3-am62a-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
new file mode 100644
index 000000000..99f2878de
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM62A SK: https://www.ti.com/lit/zip/sprr459
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am62a7.dtsi"
+
+/ {
+	compatible = "ti,am62a7-sk", "ti,am62a7";
+	model = "Texas Instruments AM62A7 SK";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS25750 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of TPS63070 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM5141-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62a-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+};
+
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
+			AM62AX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
+			AM62AX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
+			AM62AX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
+		>;
+	};
+};
+
+/* WKUP UART0 is used for DM firmware logs */
+&wkup_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
+			AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x01e8, PIN_INPUT, 1) /* (C17) I2C1_SCL.UART1_RXD */
+			AM62AX_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (E17) I2C1_SDA.UART1_TXD */
+			AM62AX_IOPAD(0x0194, PIN_INPUT, 2) /* (C19) MCASP0_AXR3.UART1_CTSn */
+			AM62AX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (B19) MCASP0_AXR2.UART1_RTSn */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62AX_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62AX_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+			AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+			AM62AX_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+			AM62AX_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+			AM62AX_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+			AM62AX_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+			AM62AX_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+			AM62AX_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x244, PIN_OUTPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
+			AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62AX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
+			AM62AX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
+			AM62AX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
+			AM62AX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
+			AM62AX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
+			AM62AX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
+			AM62AX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
+			AM62AX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
+			AM62AX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
+			AM62AX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
+			AM62AX_IOPAD(0x130, PIN_INPUT, 0) /* (AB17) RGMII1_TXC */
+			AM62AX_IOPAD(0x12c, PIN_INPUT, 0) /* (W16) RGMII1_TX_CTL */
+		>;
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	typec_pd0: usb-power-controller@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&usb0_hs_ep>;
+				};
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "BT_EN_SOC", "MMC1_SD_EN",
+				   "VPP_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "BT_UART_WAKE_SOC",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO0",
+				   "CSI_GPIO1", "WLAN_ALERTn",
+				   "HDMI_INTn", "TEST_GPIO2",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
+	};
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&main_gpio_intr {
+	status = "okay";
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+/* Main UART1 is used for TIFS firmware logs */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	status = "reserved";
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	usb-role-switch;
+
+	port {
+		usb0_hs_ep: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
+&cpsw3g {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
new file mode 100644
index 000000000..58f1c43ed
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62A7 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/zip/spruj16
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62a.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
new file mode 100644
index 000000000..c24ff9054
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P main domain peripherals
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x10000>;
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		bootph-all;
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			bootph-all;
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		bootph-all;
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			 <&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			bootph-all;
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			bootph-all;
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			bootph-all;
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		bootph-all;
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_timer0: timer@2400000 {
+		bootph-all;
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 2>;
+		assigned-clock-parents = <&k3_clks 36 3>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
new file mode 100644
index 000000000..27ca1c9c6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P MCU domain peripherals
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
new file mode 100644
index 000000000..aaf4b793b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P wakeup domain peripherals
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: bus@43000000 {
+		bootph-all;
+		compatible = "simple-bus";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			bootph-all;
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
new file mode 100644
index 000000000..294ab73ec
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62P SoC Family
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM62P5 SoC";
+	compatible = "ti,am62p5";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x30210000 0x00 0x30210000 0x00 0x00010000>, /* VPU */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+			 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>,
+			 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>,
+			 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>,
+			 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>,
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>,
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>,
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>,
+			 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>, /* Peripheral window */
+				 <0x00 0x79000000 0x00 0x79000000 0x00 0x00008000>, /* MCU R5 ATCM */
+				 <0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
+				 <0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
+				 <0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+		};
+
+		cbass_wakeup: bus@b00000 {
+			bootph-all;
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
+				 <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
+				 <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+		};
+	};
+};
+
+/* Now include peripherals for each bus segment */
+#include "k3-am62p-main.dtsi"
+#include "k3-am62p-mcu.dtsi"
+#include "k3-am62p-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
new file mode 100644
index 000000000..6fb17b17c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P5-SK
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Schematics: https://www.ti.com/lit/zip/sprr487
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5.dtsi"
+
+/ {
+	compatible = "ti,am62p5-sk", "ti,am62p5";
+	model = "Texas Instruments AM62P5 SK";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	memory@80000000 {
+		/* 8G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000001 0x80000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x1c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
+			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
+			AM62PX_IOPAD(0x1d0, PIN_INPUT, 0)	/* (A23) UART0_CTSn */
+			AM62PX_IOPAD(0x1d4, PIN_OUTPUT, 0)	/* (C22) UART0_RTSn */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x194, PIN_INPUT, 2)	/* (D25) MCASP0_AXR3 */
+			AM62PX_IOPAD(0x198, PIN_OUTPUT, 2)	/* (E25) MCASP0_AXR2 */
+			AM62PX_IOPAD(0x1ac, PIN_INPUT, 2)	/* (G23) MCASP0_AFSR */
+			AM62PX_IOPAD(0x1b0, PIN_OUTPUT, 2)	/* (G20) MCASP0_ACLKR */
+		>;
+	};
+};
+
+&main_uart0 {
+	bootph-all;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&cbass_mcu {
+	bootph-all;
+};
+
+&mcu_pmx0 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C7) WKUP_UART0_CTSn */
+			AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (C6) WKUP_UART0_RTSn */
+			AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (D8) WKUP_UART0_RXD */
+			AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (D7) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	bootph-all;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
new file mode 100644
index 000000000..50147bb63
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the AM62P5 SoC family (quad core)
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruj83
+ */
+
+/dts-v1/;
+
+#include "k3-am62p.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 135 0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 136 0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 137 0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&l2_0>;
+			clocks = <&k3_clks 138 0>;
+		};
+	};
+
+	l2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
new file mode 100644
index 000000000..677ff8de4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for AM62x SK and derivatives
+ *
+ * Copyright (C) 2021-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am625.dtsi"
+
+/ {
+	aliases {
+		serial2 = &main_uart0;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		spi0 = &ospi0;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@9ca00000 {
+			compatible = "ramoops";
+			reg = <0x00 0x9ca00000 0x00 0x00100000>;
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x00>;
+			pmsg-size = <0x8000>;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	tlv320_mclk: clk-0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12288000>;
+	};
+
+	codec_audio: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-SKEVM";
+		simple-audio-card,widgets =
+			"Headphone",	"Headphone Jack",
+			"Line",		"Line In",
+			"Microphone",	"Microphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In",
+			"MIC3R",		"Microphone Jack",
+			"Microphone Jack",	"Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
+	hdmi0: connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	/* First pad number is ALW package and second is AMC package */
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14/A13) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14/E11) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19/B18) MCASP0_AXR3.UART1_CTSn */
+			AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19/B17) MCASP0_AXR2.UART1_RTSn */
+			AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19/D15) MCASP0_AFSR.UART1_RXD */
+			AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20/D16) MCASP0_ACLKR.UART1_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16/E12) I2C0_SCL */
+			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16/D14) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17/A17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17/A16) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22/H18) GPMC0_CSn2.I2C2_SCL */
+			AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */
+			AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */
+			AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */
+			AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */
+			AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */
+			AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */
+			AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17/B15) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+
+	main_mdio1_pins_default: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24/V17) MDIO0_MDC */
+			AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22/U16) MDIO0_MDIO */
+		>;
+	};
+
+	main_rgmii1_pins_default: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17/W15) RGMII1_RD0 */
+			AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17/Y16) RGMII1_RD1 */
+			AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16/AA17) RGMII1_RD2 */
+			AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15/Y15) RGMII1_RD3 */
+			AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17/AA16) RGMII1_RXC */
+			AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17/W14) RGMII1_RX_CTL */
+			AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20/U14) RGMII1_TD0 */
+			AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20/AA19) RGMII1_TD1 */
+			AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18/Y17) RGMII1_TD2 */
+			AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18/AA18) RGMII1_TD3 */
+			AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19/W16) RGMII1_TXC */
+			AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19/V15) RGMII1_TX_CTL */
+		>;
+	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
+		>;
+	};
+
+	main_mcasp1_pins_default: main-mcasp1-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x090, PIN_INPUT, 2) /* (M24/K17) GPMC0_BE0N_CLE.MCASP1_ACLKX */
+			AM62X_IOPAD(0x098, PIN_INPUT, 2) /* (U23/P21) GPMC0_WAIT0.MCASP1_AFSX */
+			AM62X_IOPAD(0x08c, PIN_OUTPUT, 2) /* (L25/J17) GPMC0_WEN.MCASP1_AXR0 */
+			AM62X_IOPAD(0x084, PIN_INPUT, 2) /* (L23/K20) GPMC0_ADVN_ALE.MCASP1_AXR2 */
+		>;
+	};
+
+	main_dss0_pins_default: main-dss0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
+			AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
+			AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
+			AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
+			AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
+			AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
+			AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
+			AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
+			AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
+			AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
+			AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
+			AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
+			AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
+			AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
+			AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
+			AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
+			AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
+			AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
+			AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
+			AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
+			AM62X_IOPAD(0x05c, PIN_OUTPUT, 1) /* (R24) GPMC0_AD8.VOUT0_DATA16 */
+			AM62X_IOPAD(0x060, PIN_OUTPUT, 1) /* (R25) GPMC0_AD9.VOUT0_DATA17 */
+			AM62X_IOPAD(0x064, PIN_OUTPUT, 1) /* (T25) GPMC0_AD10.VOUT0_DATA18 */
+			AM62X_IOPAD(0x068, PIN_OUTPUT, 1) /* (R21) GPMC0_AD11.VOUT0_DATA19 */
+			AM62X_IOPAD(0x06c, PIN_OUTPUT, 1) /* (T22) GPMC0_AD12.VOUT0_DATA20 */
+			AM62X_IOPAD(0x070, PIN_OUTPUT, 1) /* (T24) GPMC0_AD13.VOUT0_DATA21 */
+			AM62X_IOPAD(0x074, PIN_OUTPUT, 1) /* (U25) GPMC0_AD14.VOUT0_DATA22 */
+			AM62X_IOPAD(0x078, PIN_OUTPUT, 1) /* (U24) GPMC0_AD15.VOUT0_DATA23 */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62X_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C6/A7) WKUP_UART0_CTSn */
+			AM62X_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (A4/B4) WKUP_UART0_RTSn */
+			AM62X_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (B4/B5) WKUP_UART0_RXD */
+			AM62X_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (C5/C6) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T or M24512-DFMC6TG */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+
+	typec_pd0: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <100000>;
+
+	tlv320aic3106: audio-codec@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		ai3x-micbias-vg = <1>;	/* 2.0V */
+
+		/* Regulators */
+		AVDD-supply = <&vcc_3v3_sys>;
+		IOVDD-supply = <&vcc_3v3_sys>;
+		DRVDD-supply = <&vcc_3v3_sys>;
+	};
+
+	sii9022: bridge-hdmi@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+		interrupt-parent = <&exp1>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		#sound-dai-cells = <0>;
+		sil,i2s-data-lanes = < 0 >;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usbss1 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
+&mcasp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcasp1_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+	       1 0 2 0
+	       0 0 0 0
+	       0 0 0 0
+	       0 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_dss0_pins_default>;
+};
+
+&dss_ports {
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso
new file mode 100644
index 000000000..43a0ddc12
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Audio playback via HDMI for AM625-SK and AM62-LP SK.
+ *
+ * Links:
+ * AM625 SK: https://www.ti.com/tool/SK-AM62
+ * AM62-LP SK: https://www.ti.com/tool/SK-AM62-LP
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	hdmi_audio: sound-sii9022 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM62x-Sil9022-HDMI";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&hdmi_dailink_master>;
+		simple-audio-card,frame-master = <&hdmi_dailink_master>;
+
+		hdmi_dailink_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-direction-out;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sii9022>;
+		};
+	};
+};
+
+&mcasp1 {
+	auxclk-fs-ratio = <2177>;
+};
+
+&codec_audio {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
new file mode 100644
index 000000000..0df54a741
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -0,0 +1,1546 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: clock-cmnrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	oc_sram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x70000000 0x200000>;
+
+		tfa-sram@1c0000 {
+			reg = <0x1c0000 0x20000>;
+		};
+
+		dmsc-sram@1e0000 {
+			reg = <0x1e0000 0x1c000>;
+		};
+
+		sproxy-sram@1fc000 {
+			reg = <0x1fc000 0x4000>;
+		};
+	};
+
+	main_conf: syscon@43000000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x0 0x43000000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x43000000 0x20000>;
+
+		chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x00000014 0x4>;
+		};
+
+		serdes_ln_ctrl: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
+		};
+
+		phy_gmii_sel: phy@4044 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4044 0x8>;
+			#phy-cells = <1>;
+		};
+
+		epwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am64-epwm-tbclk";
+			reg = <0x4130 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01840000 0x00 0xC0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,	/* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,	/* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;	/* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		inta_main_dmss: interrupt-controller@48000000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x48000000 0x00 0x100000>;
+			#interrupt-cells = <0>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <28>;
+			ti,interrupt-ranges = <4 68 36>;
+			ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+		};
+
+		main_bcdma: dma-controller@485c0100 {
+			compatible = "ti,am64-dmss-bcdma";
+			reg = <0x00 0x485c0100 0x00 0x100>,
+			      <0x00 0x4c000000 0x00 0x20000>,
+			      <0x00 0x4a820000 0x00 0x20000>,
+			      <0x00 0x4aa40000 0x00 0x20000>,
+			      <0x00 0x4bc00000 0x00 0x100000>;
+			reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <3>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <26>;
+			ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+			ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+			ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+		};
+
+		main_pktdma: dma-controller@485c0000 {
+			compatible = "ti,am64-dmss-pktdma";
+			reg = <0x00 0x485c0000 0x00 0x100>,
+			      <0x00 0x4a800000 0x00 0x20000>,
+			      <0x00 0x4aa00000 0x00 0x40000>,
+			      <0x00 0x4b800000 0x00 0x400000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&inta_main_dmss>;
+			#dma-cells = <2>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <30>;
+			ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+						<0x24>, /* CPSW_TX_CHAN */
+						<0x25>, /* SAUL_TX_0_CHAN */
+						<0x26>, /* SAUL_TX_1_CHAN */
+						<0x27>, /* ICSSG_0_TX_CHAN */
+						<0x28>; /* ICSSG_1_TX_CHAN */
+			ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+						<0x11>, /* RING_CPSW_TX_CHAN */
+						<0x12>, /* RING_SAUL_TX_0_CHAN */
+						<0x13>, /* RING_SAUL_TX_1_CHAN */
+						<0x14>, /* RING_ICSSG_0_TX_CHAN */
+						<0x15>; /* RING_ICSSG_1_TX_CHAN */
+			ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+						<0x2b>, /* CPSW_RX_CHAN */
+						<0x2d>, /* SAUL_RX_0_CHAN */
+						<0x2f>, /* SAUL_RX_1_CHAN */
+						<0x31>, /* SAUL_RX_2_CHAN */
+						<0x33>, /* SAUL_RX_3_CHAN */
+						<0x35>, /* ICSSG_0_RX_CHAN */
+						<0x37>; /* ICSSG_1_RX_CHAN */
+			ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+						<0x2c>, /* FLOW_CPSW_RX_CHAN */
+						<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+						<0x32>, /* FLOW_SAUL_RX_2/3_CHAN */
+						<0x36>, /* FLOW_ICSSG_0_RX_CHAN */
+						<0x38>; /* FLOW_ICSSG_1_RX_CHAN */
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes = <&secure_proxy_main 12>,
+			<&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2d0>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 36 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 36 1>;
+		assigned-clock-parents = <&k3_clks 36 2>;
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 37 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 37 1>;
+		assigned-clock-parents = <&k3_clks 37 2>;
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 38 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 38 1>;
+		assigned-clock-parents = <&k3_clks 38 2>;
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 39 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 39 1>;
+		assigned-clock-parents = <&k3_clks 39 2>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 40 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 40 1>;
+		assigned-clock-parents = <&k3_clks 40 2>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 41 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 41 1>;
+		assigned-clock-parents = <&k3_clks 41 2>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 42 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 42 1>;
+		assigned-clock-parents = <&k3_clks 42 2>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 43 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 43 1>;
+		assigned-clock-parents = <&k3_clks 43 2>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 44 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 44 1>;
+		assigned-clock-parents = <&k3_clks 44 2>;
+		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 45 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 45 1>;
+		assigned-clock-parents = <&k3_clks 45 2>;
+		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 46 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 46 1>;
+		assigned-clock-parents = <&k3_clks 46 2>;
+		power-domains = <&k3_pds 46 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 47 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 47 1>;
+		assigned-clock-parents = <&k3_clks 47 2>;
+		power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_esm: esm@420000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x420000 0x00 0x1000>;
+		ti,esm-pins = <160>, <161>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@20100000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x20100000 0x00 0x400>;
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 0>;
+		dmas = <&main_pktdma 0xc300 0>, <&main_pktdma 0x4300 0>;
+		dma-names = "tx0", "rx0";
+		status = "disabled";
+	};
+
+	main_spi1: spi@20110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20110000 0x00 0x400>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 142 0>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@20120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20120000 0x00 0x400>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 143 0>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@20130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20130000 0x00 0x400>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 144 0>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@20140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x20140000 0x00 0x400>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 145 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 145 0>;
+		status = "disabled";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <87>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <88>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	sdhci0: mmc@fa10000 {
+		compatible = "ti,am64-sdhci-8bit";
+		reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x7>;
+	};
+
+	sdhci1: mmc@fa00000 {
+		compatible = "ti,am64-sdhci-4bit";
+		reg = <0x00 0xfa00000 0x00 0x260>, <0x00 0xfa08000 0x00 0x134>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
+		clock-names = "clk_ahb", "clk_xin";
+		ti,trm-icp = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,clkbuf-sel = <0x7>;
+	};
+
+	cpsw3g: ethernet@8000000 {
+		compatible = "ti,am642-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x8000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
+		clocks = <&k3_clks 13 0>;
+		assigned-clocks = <&k3_clks 13 1>;
+		assigned-clock-parents = <&k3_clks 13 9>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_pktdma 0xC500 15>,
+		       <&main_pktdma 0xC501 15>,
+		       <&main_pktdma 0xC502 15>,
+		       <&main_pktdma 0xC503 15>,
+		       <&main_pktdma 0xC504 15>,
+		       <&main_pktdma 0xC505 15>,
+		       <&main_pktdma 0xC506 15>,
+		       <&main_pktdma 0xC507 15>,
+		       <&main_pktdma 0x4500 15>;
+		dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+			    "tx7", "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel 1>;
+				mac-address = [00 00 00 00 00 00];
+				ti,syscon-efuse = <&main_conf 0x200>;
+			};
+
+			cpsw_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				phys = <&phy_gmii_sel 2>;
+				mac-address = [00 00 00 00 00 00];
+			};
+		};
+
+		cpsw3g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 13 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 13 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_cpts0: cpts@39000000 {
+		compatible = "ti,j721e-cpts";
+		reg = <0x0 0x39000000 0x0 0x400>;
+		reg-names = "cpts";
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 84 0>;
+		clock-names = "cpts";
+		assigned-clocks = <&k3_clks 84 0>;
+		assigned-clock-parents = <&k3_clks 84 8>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "cpts";
+		ti,cpts-periodic-outputs = <6>;
+		ti,cpts-ext-ts-inputs = <8>;
+	};
+
+	timesync_router: pinctrl@a40000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0xa40000 0x0 0x800>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000107ff>;
+	};
+
+	usbss0: cdns-usb@f900000 {
+		compatible = "ti,am64-usb";
+		reg = <0x00 0xf900000 0x00 0x100>;
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 161 9>, <&k3_clks 161 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 161 9>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 161 10>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		usb0: usb@f400000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0xf400000 0x00 0x10000>,
+			      <0x00 0xf410000 0x00 0x10000>,
+			      <0x00 0xf420000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	tscadc0: tscadc@28001000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x00 0x28001000 0x00 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 0>;
+		assigned-clock-parents = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	fss: bus@fc00000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x0fc00000 0x00 0x70000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@fc40000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x0fc40000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&k3_clks 75 6>;
+			assigned-clocks = <&k3_clks 75 6>;
+			assigned-clock-parents = <&k3_clks 75 7>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+			status = "disabled";
+		};
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster2: mailbox@29020000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29020000 0x00 0x200>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster3: mailbox@29030000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29030000 0x00 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster4: mailbox@29040000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29040000 0x00 0x200>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster5: mailbox@29050000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29050000 0x00 0x200>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster6: mailbox@29060000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29060000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	mailbox0_cluster7: mailbox@29070000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29070000 0x00 0x200>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+		status = "disabled";
+	};
+
+	main_r5fss0: r5fss@78000000 {
+		compatible = "ti,am64-r5fss";
+		ti,cluster-mode = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78000000 0x00 0x78000000 0x10000>,
+			 <0x78100000 0x00 0x78100000 0x10000>,
+			 <0x78200000 0x00 0x78200000 0x08000>,
+			 <0x78300000 0x00 0x78300000 0x08000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@78000000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78000000 0x00010000>,
+			      <0x78100000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <121>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 121 1>;
+			firmware-name = "am64-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@78200000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78200000 0x00008000>,
+			      <0x78300000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <122>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 122 1>;
+			firmware-name = "am64-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@78400000 {
+		compatible = "ti,am64-r5fss";
+		ti,cluster-mode = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x78400000 0x00 0x78400000 0x10000>,
+			 <0x78500000 0x00 0x78500000 0x10000>,
+			 <0x78600000 0x00 0x78600000 0x08000>,
+			 <0x78700000 0x00 0x78700000 0x08000>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@78400000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78400000 0x00010000>,
+			      <0x78500000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <123>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 123 1>;
+			firmware-name = "am64-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@78600000 {
+			compatible = "ti,am64-r5f";
+			reg = <0x78600000 0x00008000>,
+			      <0x78700000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <124>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 124 1>;
+			firmware-name = "am64-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	serdes_wiz0: wiz@f000000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <1>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
+
+		assigned-clocks = <&k3_clks 162 1>;
+		assigned-clock-parents = <&k3_clks 162 5>;
+
+		serdes0: serdes@f000000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x0f000000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 162 1>,
+						 <&k3_clks 162 1>,
+						 <&k3_clks 162 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+		};
+	};
+
+	pcie0_rc: pcie@f102000 {
+		compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x0f102000 0x00 0x1000>,
+		      <0x00 0x0f100000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x68000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		max-link-speed = <2>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>;
+		clock-names = "fck", "pcie_refclk";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		cdns,no-bar-match-nbits = <64>;
+		vendor-id = <0x104c>;
+		device-id = <0xb010>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		ranges = <0x01000000 0x00 0x68001000  0x00 0x68001000  0x00 0x0010000>,
+			 <0x02000000 0x00 0x68011000  0x00 0x68011000  0x00 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>;
+		status = "disabled";
+	};
+
+	pcie0_ep: pcie-ep@f102000 {
+		compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x0f102000 0x00 0x1000>,
+		      <0x00 0x0f100000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x68000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&main_conf 0x4070>;
+		max-link-speed = <2>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <1>;
+		status = "disabled";
+	};
+
+	epwm0: pwm@23000000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23000000 0x0 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 0>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm1: pwm@23010000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23010000 0x0 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 1>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm2: pwm@23020000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23020000 0x0 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 2>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm3: pwm@23030000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23030000 0x0 0x100>;
+		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 3>, <&k3_clks 89 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm4: pwm@23040000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23040000 0x0 0x100>;
+		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 4>, <&k3_clks 90 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm5: pwm@23050000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23050000 0x0 0x100>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 5>, <&k3_clks 91 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm6: pwm@23060000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23060000 0x0 0x100>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 6>, <&k3_clks 92 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm7: pwm@23070000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23070000 0x0 0x100>;
+		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 7>, <&k3_clks 93 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	epwm8: pwm@23080000 {
+		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23080000 0x0 0x100>;
+		power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&epwm_tbclk 8>, <&k3_clks 94 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ecap0: pwm@23100000 {
+		compatible = "ti,am64-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23100000 0x0 0x60>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 51 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap1: pwm@23110000 {
+		compatible = "ti,am64-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23110000 0x0 0x60>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 52 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	ecap2: pwm@23120000 {
+		compatible = "ti,am64-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x23120000 0x0 0x60>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 53 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_rti0: watchdog@e000000 {
+			compatible = "ti,j7-rti-wdt";
+			reg = <0x00 0xe000000 0x00 0x100>;
+			clocks = <&k3_clks 125 0>;
+			power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+			assigned-clocks = <&k3_clks 125 0>;
+			assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+			compatible = "ti,j7-rti-wdt";
+			reg = <0x00 0xe010000 0x00 0x100>;
+			clocks = <&k3_clks 126 0>;
+			power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+			assigned-clocks = <&k3_clks 126 0>;
+			assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	icssg0: icssg@30000000 {
+		compatible = "ti,am642-icssg";
+		reg = <0x00 0x30000000 0x00 0x80000>;
+		power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x30000000 0x80000>;
+
+		icssg0_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1", "shrdram2";
+		};
+
+		icssg0_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg0_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
+						 <&k3_clks 81 20>; /* icssg0_iclk */
+					assigned-clocks = <&icssg0_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 81 20>;
+				};
+
+				icssg0_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 81 3>,	/* icssg0_iep_clk */
+						 <&icssg0_coreclk_mux>;	/* icssg0_coreclk_mux */
+					assigned-clocks = <&icssg0_iepclk_mux>;
+					assigned-clock-parents = <&icssg0_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg0_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg0_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg0_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0_0: pru@34000 {
+			compatible = "ti,am642-pru";
+			reg = <0x34000 0x3000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru0_0-fw";
+		};
+
+		rtu0_0: rtu@4000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu0_0-fw";
+		};
+
+		tx_pru0_0: txpru@a000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru0_0-fw";
+		};
+
+		pru0_1: pru@38000 {
+			compatible = "ti,am642-pru";
+			reg = <0x38000 0x3000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru0_1-fw";
+		};
+
+		rtu0_1: rtu@6000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu0_1-fw";
+		};
+
+		tx_pru0_1: txpru@c000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru0_1-fw";
+		};
+
+		icssg0_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg1: icssg@30080000 {
+		compatible = "ti,am642-icssg";
+		reg = <0x00 0x30080000 0x00 0x80000>;
+		power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x30080000 0x80000>;
+
+		icssg1_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1", "shrdram2";
+		};
+
+		icssg1_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg1_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
+						 <&k3_clks 82 20>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg1_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 82 20>;
+				};
+
+				icssg1_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 82 3>,	/* icssg1_iep_clk */
+						 <&icssg1_coreclk_mux>;	/* icssg1_coreclk_mux */
+					assigned-clocks = <&icssg1_iepclk_mux>;
+					assigned-clock-parents = <&icssg1_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg1_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg1_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg1_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru1_0: pru@34000 {
+			compatible = "ti,am642-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru1_0-fw";
+		};
+
+		rtu1_0: rtu@4000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu1_0-fw";
+		};
+
+		tx_pru1_0: txpru@a000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru1_0-fw";
+		};
+
+		pru1_1: pru@38000 {
+			compatible = "ti,am642-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-pru1_1-fw";
+		};
+
+		rtu1_1: rtu@6000 {
+			compatible = "ti,am642-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-rtu1_1-fw";
+		};
+
+		tx_pru1_1: txpru@c000 {
+			compatible = "ti,am642-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am64x-txpru1_1-fw";
+		};
+
+		icssg1_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 82 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	main_mcan0: can@20701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20701000 0x00 0x200>,
+		      <0x00 0x20708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 5>, <&k3_clks 98 0>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@20711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x20711000 0x00 0x200>,
+		      <0x00 0x20718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 5>, <&k3_clks 99 0>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	crypto: crypto@40900000 {
+		compatible = "ti,am64-sa2ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		power-domains = <&k3_pds 133 TI_SCI_PD_SHARED>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+		dmas = <&main_pktdma 0xc001 0>, <&main_pktdma 0x4002 0>,
+		       <&main_pktdma 0x4003 0>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x00 0x7d>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled"; /* Used by OP-TEE */
+		};
+	};
+
+	gpmc0: memory-controller@3b000000 {
+		compatible = "ti,am64-gpmc";
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 80 0>;
+		clock-names = "fck";
+		reg = <0x00 0x3b000000 0x00 0x400>,
+		      <0x00 0x50000000 0x00 0x8000000>;
+		reg-names = "cfg", "data";
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		gpmc,num-cs = <3>;
+		gpmc,num-waitpins = <2>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	elm0: ecc@25010000 {
+		compatible = "ti,am64-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
new file mode 100644
index 000000000..686d49790
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM64 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@4800000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4800000 0x00 0x400>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@4810000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4810000 0x00 0x400>;
+		clocks = <&k3_clks 48 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@4820000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4820000 0x00 0x400>;
+		clocks = <&k3_clks 49 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@4830000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x4830000 0x00 0x400>;
+		clocks = <&k3_clks 50 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_uart1: serial@4a10000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a10000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@4910000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04910000 0x00 0x100>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@4b00000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x04b00000 0x00 0x400>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 147 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@4b10000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x04b10000 0x00 0x400>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 148 0>;
+		status = "disabled";
+	};
+
+	mcu_gpio_intr: interrupt-controller@4210000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x04210000 0x00 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <5>;
+		ti,interrupt-ranges = <0 104 4>;
+	};
+
+	mcu_gpio0: gpio@4201000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x4201000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&mcu_gpio_intr>;
+		interrupts = <30>, <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <23>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 79 0>;
+		clock-names = "gpio";
+	};
+
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x4084000 0x00 0x84>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_esm: esm@4100000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x00 0x4100000 0x00 0x1000>;
+		ti,esm-pins = <0>, <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
new file mode 100644
index 000000000..1c2c8f0da
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Author: Matt McKee <mmckee@phytec.com>
+ *
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phycore-am64x
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "PHYTEC phyCORE-AM64x";
+	compatible = "phytec,am64-phycore-som", "ti,am642";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		mmc0 = &sdhci0;
+		rtc0 = &i2c_som_rtc;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	vcc_5v0_som: regulator-vcc-5v0-som {
+		/* VIN / VCC_5V0_SOM */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_5V0_SOM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	cpsw_mdio_pins_default: cpsw-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4)	/* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4)	/* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x0100, PIN_OUTPUT, 7)	/* (V7) PRG1_PRU0_GPO18.GPIO0_63 */
+		>;
+	};
+
+	cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4)	/* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4)	/* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4)	/* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4)	/* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4)	/* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4)	/* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4)	/* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4)	/* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4)	/* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4)	/* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4)	/* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4)	/* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x0154, PIN_INPUT, 7)	/* (V12) PRG1_PRU1_GPO19.GPIO0_84 */
+		>;
+	};
+
+	eeprom_wp_pins_default: eeprom-wp-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0208, PIN_OUTPUT, 7)	/* (D12) SPI0_CS0.GPIO1_42 */
+		>;
+	};
+
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0030, PIN_OUTPUT, 7)	/* (L18) OSPI0_CSn1.GPIO0_12 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT, 0)	/* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT, 0)	/* (B18) I2C0_SDA */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0)	/* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0)	/* (N19) OSPI0_DQS */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0)	/* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0)	/* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0)	/* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0)	/* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0)	/* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0)	/* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0)	/* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0)	/* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)	/* (L19) OSPI0_CSn0 */
+		>;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_rgmii1_pins_default>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_mdio_pins_default>;
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <1000>;
+		reset-deassert-us = <1000>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeprom_wp_pins_default>;
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	i2c_som_rtc: rtc@52 {
+		compatible = "microcrystal,rv3028";
+		reg = <0x52>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+	};
+};
+
+&sdhci0 {
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	keep-power-in-suspend;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
new file mode 100644
index 000000000..036db56ba
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&main_vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&main_vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
new file mode 100644
index 000000000..79ed19c6c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-sdcard.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&sdhci1 {
+	vmmc-supply = <&reg_sd>;
+	no-sdio;
+	status = "okay";
+};
+
+&main_gpio0 {
+	line43-hog {
+		gpio-hog;
+		gpios = <43 0>;
+		line-name = "MMC1_CTRL";
+		output-low;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
new file mode 100644
index 000000000..32596a84b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-tqma64xxl-mbax4xxl-wlan.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+/dts-v1/;
+/plugin/;
+
+&sdhci1 {
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-sd;
+	status = "okay";
+};
+
+&main_gpio0 {
+	line43-hog {
+		gpio-hog;
+		gpios = <43 0>;
+		line-name = "MMC1_CTRL";
+		output-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
new file mode 100644
index 000000000..8e9c2bc70
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC Family
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM642 SoC";
+	compatible = "ti,am642";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f4000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00000100>, /* Main RTI0 */
+			 <0x00 0x0e010000 0x00 0x0e010000 0x00 0x00000100>, /* Main RTI1 */
+			 <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */
+			 <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */
+			 <0x00 0x39000000 0x00 0x39000000 0x00 0x00000400>, /* CPTS0 */
+			 <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
+			 <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */
+			 <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */
+			 <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA2_UL0 */
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
+			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
+		};
+	};
+
+	#include "k3-am64-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am64-main.dtsi"
+#include "k3-am64-mcu.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
new file mode 100644
index 000000000..b4a1f73d4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -0,0 +1,690 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "k3-am642.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,am642-evm", "ti,am642";
+	model = "Texas Instruments AM642 EVM";
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart3;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-1 {
+		/* output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-2 {
+		/* output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS2051BD */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	vddb: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddb_3v3_display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_supply: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ddr_vtt_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vsys_3v3>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "am64-evm:red:heartbeat";
+			gpios = <&exp1 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+
+	mdio_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	mdio-mux-1 {
+		compatible = "mdio-mux-multiplexer";
+		mux-controls = <&mdio_mux>;
+		mdio-parent-bus = <&cpsw3g_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@1 {
+			reg = <0x1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw3g_phy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0)		/* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0)		/* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)		/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)		/* (E14) UART1_TXD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+		>;
+	};
+
+	main_spi0_pins_default: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */
+			AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */
+			AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */
+			AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+       rgmii2_pins_default: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	main_usb0_pins_default: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
+		>;
+	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */
+		>;
+	};
+
+	ddr_vtt_pins_default: ddr-vtt-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
+		>;
+	};
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	current-speed = <115200>;
+};
+
+/* main_uart1 is reserved for firmware usage */
+&main_uart1 {
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* AT24CM01 */
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL",
+				  "GPIO_CPSW1_RST", "GPIO_RGMII1_RST",
+				  "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT",
+				  "MMC1_SD_EN", "FSI_FET_SEL",
+				  "MCAN0_STB_3V3", "MCAN1_STB_3V3",
+				  "CPSW_FET_SEL", "CPSW_FET2_SEL",
+				  "PRG1_RGMII2_FET_SEL", "TEST_GPIO2",
+				  "GPIO_OLED_RESETn", "VPP_LDO_EN",
+				  "TEST_LED1", "TP92", "TP90", "TP88",
+				  "TP87", "TP86", "TP89", "TP91";
+	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&vddb>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
+};
+
+/* mcu_gpio0 is reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&main_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins_default>;
+	ti,pindir-d0-out-d1-in;
+	eeprom@0 {
+		compatible = "microchip,93lc46b";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cs-high;
+		data-size = <16>;
+	};
+};
+
+&sdhci0 {
+	/* emmc */
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usbss0 {
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy3>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&tscadc0 {
+	/* ADC is reserved for R5 usage */
+	status = "reserved";
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&ecap0 {
+	status = "okay";
+	/* PWM is available on Pin 1 of header J12 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&main_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
new file mode 100644
index 000000000..9175e9684
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 PHYTEC America, LLC - https://www.phytec.com
+ * Author: Matt McKee <mmckee@phytec.com>
+ *
+ * Copyright (C) 2022 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *
+ * Product homepage:
+ * https://www.phytec.com/product/phyboard-am64x
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+#include <dt-bindings/phy/phy.h>
+#include "k3-am642.dtsi"
+#include "k3-am64-phycore-som.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "phytec,am642-phyboard-electra-rdk",
+		     "phytec,am64-phycore-som", "ti,am642";
+	model = "PHYTEC phyBOARD-Electra-AM64x RDK";
+
+	aliases {
+		mmc1 = &sdhci1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	can_tc1: can-phy0 {
+		compatible = "ti,tcan1042";
+		pinctrl-names = "default";
+		pinctrl-0 = <&can_tc1_pins_default>;
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_tc2: can-phy1 {
+		compatible = "ti,tcan1042";
+		pinctrl-names = "default";
+		pinctrl-0 = <&can_tc2_pins_default>;
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+
+		key-home {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		key-menu {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			function = LED_FUNCTION_DISK;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&main_gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	vcc_3v3_mmc: regulator-sd {
+		/* TPS22963C */
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3_MMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&main_pmx0 {
+	can_tc1_pins_default: can-tc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0084, PIN_OUTPUT, 7)	/* (P16) GPMC0_ADVn_ALE.GPIO0_32 */
+		>;
+	};
+
+	can_tc2_pins_default: can-tc2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0090, PIN_OUTPUT, 7)	/* (P17) GPMC0_BE0n_CLE.GPIO0_35 */
+		>;
+	};
+
+	gpio_keys_pins_default: gpio-keys-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0044, PIN_INPUT, 7)	/* (T18) GPMC0_AD2.GPIO0_17 */
+			AM64X_IOPAD(0x0054, PIN_INPUT, 7)	/* (V20) GPMC0_AD6.GPIO0_21 */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT, 0)	/* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT, 0)	/* (B19) I2C1_SDA */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0)	/* (A17) MCAN0_TX */
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0)	/* (B17) MCAN0_RX */
+		>;
+	};
+
+	main_mcan1_pins_default: main-mcan1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0)	/* (C17) MCAN1_TX */
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0)	/* (D17) MCAN1_RX */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0)	/* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0)	/* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0)	/* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0)	/* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0)	/* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0)		/* MMC1_CLKLB */
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)	/* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)	/* (C16) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0)	/* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024C, PIN_OUTPUT, 0)	/* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)	/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)	/* (E14) UART1_TXD */
+		>;
+	};
+
+	main_usb0_pins_default: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)	/* (E19) USB0_DRVVBUS */
+		>;
+	};
+
+	pcie_usb_sel_pins_default: pcie-usb-sel-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x017c, PIN_OUTPUT, 7)	/* (T1) PRG0_PRU0_GPO7.GPIO1_7 */
+		>;
+	};
+
+	pcie0_pins_default: pcie0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0098, PIN_OUTPUT, 7)	/* (W19) GPMC0_WAIT0.GPIO0_37 */
+		>;
+	};
+
+	user_leds_pins_default: user-leds-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x003c, PIN_OUTPUT, 7)	/* (T20) GPMC0_AD0.GPIO0_15 */
+			AM64X_IOPAD(0x0040, PIN_OUTPUT, 7)	/* (U21) GPMC0_AD1.GPIO0_16 */
+		>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9533";
+		reg = <0x62>;
+
+		led-3 {
+			label = "red:user";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-4 {
+			label = "green:user";
+			type = <PCA9532_TYPE_LED>;
+		};
+
+		led-5 {
+			label = "blue:user";
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&can_tc1>;
+};
+
+&main_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins_default>;
+	phys = <&can_tc2>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	current-speed = <115200>;
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+	uart-has-rtscts;
+	current-speed = <115200>;
+};
+
+&sdhci1 {
+	vmmc-supply = <&vcc_3v3_mmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	bus-width = <4>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+};
+
+&serdes0 {
+	serdes0_pcie_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_pcie_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
new file mode 100644
index 000000000..722fd285a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -0,0 +1,642 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/leds/common.h>
+#include "k3-am642.dtsi"
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,am642-sk", "ti,am642";
+	model = "Texas Instruments AM642 SK";
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	aliases {
+		serial0 = &mcu_uart0;
+		serial1 = &main_uart1;
+		serial2 = &main_uart0;
+		i2c0 = &main_i2c0;
+		i2c1 = &main_i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	vusb_main: regulator-0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb_main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-1 {
+		/* output of LP8733xx */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-2 {
+		/* TPS2051BD */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	com8_ls_en: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "com8_ls_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		pinctrl-0 = <&main_com8_ls_en_pins_default>;
+		pinctrl-names = "default";
+		gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
+	};
+
+	wlan_en: regulator-4 {
+		/* output of SN74AVC4T245RSVR */
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		pinctrl-0 = <&main_wlan_en_pins_default>;
+		pinctrl-names = "default";
+		vin-supply = <&com8_ls_en>;
+		gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&exp2 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <2>;
+			gpios = <&exp2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <3>;
+			gpios = <&exp2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <4>;
+			gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <5>;
+			gpios = <&exp2 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <6>;
+			gpios = <&exp2 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <7>;
+			gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			function-enumerator = <8>;
+			linux,default-trigger = "heartbeat";
+			gpios = <&exp2 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */
+			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
+			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
+			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
+			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */
+			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */
+		>;
+	};
+
+	main_usb0_pins_default: main-usb0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
+			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
+		>;
+	};
+
+	mdio1_pins_default: mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_pins_default: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
+			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
+			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
+			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
+			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
+			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+		>;
+	};
+
+       rgmii2_pins_default: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
+		>;
+	};
+
+	main_ecap0_pins_default: main-ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
+		>;
+	};
+	main_wlan_en_pins_default: main-wlan-en-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
+		>;
+	};
+
+	main_com8_ls_en_pins_default: main-com8-ls-en-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
+		>;
+	};
+
+	main_wlan_pins_default: main-wlan-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
+		>;
+	};
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	current-speed = <115200>;
+};
+
+&main_uart1 {
+	/* main_uart1 is reserved for firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				  "PRU_DETECT", "MMC1_SD_EN",
+				  "VPP_LDO_EN", "RPI_PS_3V3_En",
+				  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
+	};
+
+	exp2: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "LED1","LED2","LED3","LED4","LED5","LED6","LED7","LED8";
+	};
+};
+
+/* mcu_gpio0 is reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&sdhci0 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,driver-strength-ohm = <50>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		pinctrl-0 = <&main_wlan_pins_default>;
+		pinctrl-names = "default";
+		interrupt-parent = <&main_gpio0>;
+		interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&sdhci1 {
+	/* SD/MMC */
+	vmmc-supply = <&vdd_mmc1>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes0 {
+	serdes0_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio1_pins_default>;
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&ecap0 {
+	status = "okay";
+	/* PWM is available on Pin 1 of header J3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_ecap0_pins_default>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
new file mode 100644
index 000000000..04c15b64f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts
@@ -0,0 +1,872 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-serdes.h"
+
+#include "k3-am642-tqma64xxl.dtsi"
+
+/ {
+	compatible = "tq,am642-tqma6442l-mbax4xxl", "tq,am642-tqma6442l",
+		     "ti,am642";
+	model = "TQ-Systems TQMa64xxL SoM on MBax4xxL carrier board";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		i2c1 = &mcu_i2c0;
+		mmc1 = &sdhci1;
+		serial0 = &mcu_uart0;
+		serial1 = &mcu_uart1;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart4;
+		serial6 = &main_uart5;
+		serial7 = &main_uart3;
+		spi1 = &main_spi0;
+		spi2 = &mcu_spi0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_gpio_keys_pins>;
+
+		user-button {
+			label = "USER_BUTTON";
+			linux,code = <BTN_0>;
+			gpios = <&mcu_gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_gpio_leds_pins>;
+
+		led-0 {
+			label = "led0";
+			gpios = <&mcu_gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+		led-1 {
+			label = "led1";
+			gpios = <&mcu_gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_fan_pins>;
+		fan-supply = <&reg_pwm_fan>;
+		#cooling-cells = <2>;
+		/* typical 25 kHz -> 40.000 nsec */
+		pwms = <&epwm5 0 40000 PWM_POLARITY_INVERTED>;
+		cooling-levels = <0 32 64 128 196 240>;
+		pulses-per-revolution = <2>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <49 IRQ_TYPE_EDGE_FALLING>;
+		status = "disabled";
+	};
+
+	wifi_pwrseq: pwrseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mmc1_wifi_pwrseq_pins>;
+		reset-gpios = <&main_gpio0 23 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_pwm_fan: regulator-pwm-fan {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_fan_reg_pins>;
+		regulator-name = "FAN_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&main_gpio1 48 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd: regulator-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mmc1_reg_pins>;
+		regulator-name = "V_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio1 43 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_pins>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_mdio_pins>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&main_gpio0 44 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <1000>;
+		reset-deassert-us = <1000>;
+		ti,rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+	};
+};
+
+&epwm5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&epwm5_pins>;
+	status = "okay";
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio0_digital_pins>,
+		    <&main_gpio0_hog_pins>;
+	gpio-line-names =
+		"", "", "", "", /* 0-3 */
+		"", "", "", "", /* 4-7 */
+		"", "", "", "", /* 8-11 */
+		"", "", "", "", /* 12-15 */
+		"", "", "", "", /* 16-19 */
+		"", "", "", "", /* 20-23 */
+		"", "", "EN_DIG_OUT_1", "STATUS_OUT_1", /* 24-27 */
+		"EN_DIG_OUT_2", "STATUS_OUT_2", "EN_SIG_OUT_3", "", /* 28-31 */
+		"", "", "STATUS_OUT_3", "EN_DIG_OUT_4", /* 32-35 */
+		"", "", "STATUS_OUT_4", "DIG_IN_1", /* 36-39 */
+		"DIG_IN_2", "DIG_IN_3", "DIG_IN_4"; /* 40- */
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_gpio1_hog_pins>;
+	gpio-line-names =
+		"", "", "", "", /* 0-3 */
+		"", "", "", "", /* 4-7 */
+		"", "", "", "", /* 8-11 */
+		"", "", "", "", /* 12-15 */
+		"", "", "", "", /* 16-19 */
+		"", "", "", "", /* 20-23 */
+		"", "", "", "", /* 24-27 */
+		"", "", "", "", /* 28-31 */
+		"", "", "", "", /* 32-35 */
+		"", "", "", "", /* 36-39 */
+		"", "", "", "", /* 40-43 */
+		"", "", "", "", /* 44-47 */
+		"", "", "", "", /* 48-51 */
+		"", "", "", "ADC_SYNC", /* 52-55 */
+		"", "", "ADC_RST#", "ADC_DATA_RDY", /* 56-59 */
+		"", "", "", "", /* 60-63 */
+		"", "", "", "ADC_INT#", /* 64-67 */
+		"BG95_PWRKEY", "BG95_RESET"; /* 68- */
+
+	line50-hog {
+		/* See also usb0 */
+		gpio-hog;
+		gpios = <50 0>;
+		line-name = "USB0_VBUS_OC#";
+		input;
+	};
+
+	line54-hog {
+		gpio-hog;
+		gpios = <54 0>;
+		line-name = "PRG0_MDIO_SWITCH";
+		output-low;
+	};
+
+	line70-hog {
+		gpio-hog;
+		gpios = <70 0>;
+		line-name = "PHY_INT#";
+		input;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins>;
+	status = "okay";
+};
+
+&main_mcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan1_pins>;
+	status = "okay";
+};
+
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	/* adc@0: NXP NAFE13388 */
+};
+
+/* UART/USB adapter port 1 */
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins>;
+	status = "okay";
+};
+
+/*
+ * IOT Module - GNSS UART
+ *
+ * Note: We expect usage of a SYSFW that does not reserve UART1 for debug traces
+ */
+&main_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins>;
+	status = "okay";
+};
+
+/* RS485 port */
+&main_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart2_pins>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	status = "okay";
+};
+
+/* Bluetooth module */
+&main_uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart3_pins>;
+	/*
+	 * Left disabled for now, until a way to deal with drivers and firmware
+	 * for the combined WLAN/BT module has been figured out
+	 */
+};
+
+/* IOT module - Main UART */
+&main_uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart4_pins>;
+	status = "okay";
+};
+
+/* IOT module - DBG UART */
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart5_pins>;
+	status = "okay";
+};
+
+&main0_thermal {
+	trips {
+		main0_active0: trip-active0 {
+			temperature = <40000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		main0_active1: trip-active1 {
+			temperature = <48000>;
+			hysteresis = <3000>;
+			type = "active";
+		};
+
+		main0_active2: trip-active2 {
+			temperature = <60000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&main0_active0>;
+			cooling-device = <&fan0 1 1>;
+		};
+
+		map2 {
+			trip = <&main0_active1>;
+			cooling-device = <&fan0 2 2>;
+		};
+
+		map3 {
+			trip = <&main0_active2>;
+			cooling-device = <&fan0 3 3>;
+		};
+	};
+};
+
+&main1_thermal {
+	trips {
+		main1_active0: trip-active0 {
+			temperature = <40000>;
+			hysteresis = <5000>;
+			type = "active";
+		};
+
+		main1_active1: trip-active1 {
+			temperature = <48000>;
+			hysteresis = <3000>;
+			type = "active";
+		};
+
+		main1_active2: trip-active2 {
+			temperature = <60000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map1 {
+			trip = <&main1_active0>;
+			cooling-device = <&fan0 1 1>;
+		};
+
+		map2 {
+			trip = <&main1_active1>;
+			cooling-device = <&fan0 2 2>;
+		};
+
+		map3 {
+			trip = <&main1_active2>;
+			cooling-device = <&fan0 3 3>;
+		};
+	};
+};
+
+&mcu_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_gpio0_pins>;
+};
+
+&mcu_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins>;
+	/* Left disabled: not functional without external pullup */
+};
+
+&mcu_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+};
+
+/* UART/USB adapter port 2 */
+&mcu_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins>;
+	status = "okay";
+};
+
+/* Pin header */
+&mcu_uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart1_pins>;
+	status = "okay";
+};
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes0 {
+	serdes0_usb_link: phy@0 {
+		reg = <0>;
+		#phy-cells = <0>;
+		resets = <&serdes_wiz0 1>;
+		cdns,num-lanes = <1>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+	};
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&main_gpio1 77 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-mmc;
+	ti,driver-strength-ohm = <50>;
+	ti,fails-without-test-cd;
+	/* Enabled by overlay */
+	status = "disabled";
+};
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&usb0 {
+	/*
+	 * The CDNS USB driver currently doesn't support overcurrent GPIOs,
+	 * so there is no overcurrent detection. The OC pin is configured
+	 * as a GPIO hog instead.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins>;
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&main_pmx0 {
+	cpsw_pins: cpsw-pins {
+		pinctrl-single,pins = <
+			/* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
+			AM64X_IOPAD(0x01cc, PIN_INPUT, 4)
+			/* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
+			AM64X_IOPAD(0x01d4, PIN_INPUT, 4)
+			/* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
+			AM64X_IOPAD(0x01d8, PIN_INPUT, 4)
+			/* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
+			AM64X_IOPAD(0x01f4, PIN_INPUT, 4)
+			/* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
+			AM64X_IOPAD(0x0188, PIN_INPUT, 4)
+			/* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
+			AM64X_IOPAD(0x0184, PIN_INPUT, 4)
+			/* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
+			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4)
+			/* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
+			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4)
+			/* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
+			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4)
+			/* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
+			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4)
+			/* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
+			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4)
+			/* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4)
+		>;
+	};
+
+	cpsw_mdio_pins: cpsw-mdio-pins {
+		pinctrl-single,pins = <
+			/* (R21) GPMC0_CSn3.GPIO0_44 - RESET_RGMII1# */
+			AM64X_IOPAD(0x00b4, PIN_OUTPUT, 7)
+
+			/* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
+			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4)
+			/* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
+			AM64X_IOPAD(0x01f8, PIN_INPUT, 4)
+		>;
+	};
+
+	epwm5_pins: epwm5-pins {
+		pinctrl-single,pins = <
+			/* (W19) GPMC0_WAIT0.EHRPWM5_B */
+			AM64X_IOPAD(0x0098, PIN_OUTPUT, 3)
+		>;
+	};
+
+	/* Digital IOs */
+	main_gpio0_digital_pins: main-gpio0-digital-pins {
+		pinctrl-single,pins = <
+			/* (W20) GPMC0_AD11.GPIO0_26 - EN_DIG_OUT_1 */
+			AM64X_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (W21) GPMC0_AD12.GPIO0_27 - STATUS_OUT_1 */
+			AM64X_IOPAD(0x006c, PIN_INPUT, 7)
+			/* (V18) GPMC0_AD13.GPIO0_28 - EN_DIG_OUT_2 */
+			AM64X_IOPAD(0x0070, PIN_OUTPUT, 7)
+			/* (Y21) GPMC0_AD14.GPIO0_29 - STATUS_OUT_2 */
+			AM64X_IOPAD(0x0074, PIN_INPUT, 7)
+			/* (Y20) GPMC0_AD15.GPIO0_30 - EN_DIG_OUT_3 */
+			AM64X_IOPAD(0x0078, PIN_OUTPUT, 7)
+			/* (T21) GPMC0_WEn.GPIO0_34 - STATUS_OUT_3 */
+			AM64X_IOPAD(0x008c, PIN_INPUT, 7)
+			/* (P17) GPMC0_BE0n_CLE.GPIO0_35 - EN_DIG_OUT_4 */
+			AM64X_IOPAD(0x0090, PIN_OUTPUT, 7)
+			/* (Y18) GPMC0_WAIT1.GPIO0_38 - STATUS_OUT_4 */
+			AM64X_IOPAD(0x009c, PIN_INPUT, 7)
+			/* (N16) GPMC0_WPn.GPIO0_39 - DIG_IN_1 */
+			AM64X_IOPAD(0x00a0, PIN_INPUT, 7)
+			/* (N17) GPMC0_DIR.GPIO0_40 - DIG_IN_2 */
+			AM64X_IOPAD(0x00a4, PIN_INPUT, 7)
+			/* (R19) GPMC0_CSn0.GPIO0_41 - DIG_IN_3 */
+			AM64X_IOPAD(0x00a8, PIN_INPUT, 7)
+			/* (R20) GPMC0_CSn1.GPIO0_42 - DIG_IN_4 */
+			AM64X_IOPAD(0x00ac, PIN_INPUT, 7)
+		>;
+	};
+
+	main_gpio0_hog_pins: main-gpio0-hog-pins {
+		pinctrl-single,pins = <
+			/* (P19) GPMC0_CSn2.GPIO0_43 - MMC1_CTRL */
+			AM64X_IOPAD(0x00b0, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_gpio1_hog_pins: main-gpio1-hog-pins {
+		pinctrl-single,pins = <
+			/* (B15) SPI1_D0.GPIO1_50 - USB0_VBUS_OC# */
+			AM64X_IOPAD(0x0228, PIN_INPUT, 7)
+			/* (B16) UART0_CTSn.GPIO1_54 - PRG0_MDIO_SWITCH */
+			AM64X_IOPAD(0x0238, PIN_OUTPUT, 7)
+			/* (C19) EXTINTn.GPIO1_70 - PHY_INT# */
+			AM64X_IOPAD(0x0278, PIN_INPUT, 7)
+		>;
+	};
+
+	main_mcan0_pins: main-mcan0-pins {
+		pinctrl-single,pins = <
+			/* (B17) MCAN0_RX */
+			AM64X_IOPAD(0x0254, PIN_INPUT, 0)
+			/* (A17) MCAN0_TX */
+			AM64X_IOPAD(0x0250, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_mcan1_pins: main-mcan1-pins {
+		pinctrl-single,pins = <
+			/* (D17) MCAN1_RX */
+			AM64X_IOPAD(0x025c, PIN_INPUT, 0)
+			/* (C17) MCAN1_TX */
+			AM64X_IOPAD(0x0258, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_mmc1_pins: main-mmc1-pins {
+		pinctrl-single,pins = <
+			/* (J19) MMC1_CMD */
+			AM64X_IOPAD(0x0294, PIN_INPUT, 0)
+			/* (L20) MMC1_CLK */
+			AM64X_IOPAD(0x028c, PIN_INPUT, 0)
+			/* (K21) MMC1_DAT0 */
+			AM64X_IOPAD(0x0288, PIN_INPUT, 0)
+			/* (L21) MMC1_DAT1 */
+			AM64X_IOPAD(0x0284, PIN_INPUT, 0)
+			/* (K19) MMC1_DAT2 */
+			AM64X_IOPAD(0x0280, PIN_INPUT, 0)
+			/* (K18) MMC1_DAT3 */
+			AM64X_IOPAD(0x027c, PIN_INPUT, 0)
+			/* (D19) MMC1_SDCD.GPIO1_77 */
+			AM64X_IOPAD(0x0298, PIN_INPUT, 7)
+			/* (#N/A) MMC1_CLKLB */
+			AM64X_IOPAD(0x0290, PIN_INPUT, 0)
+		>;
+	};
+
+	main_mmc1_reg_pins: main-mmc1-reg-pins {
+		pinctrl-single,pins = <
+			/* (C13) SPI0_CS1.GPIO1_43 - MMC1_SD_EN */
+			AM64X_IOPAD(0x020c, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_mmc1_wifi_pwrseq_pins: main-mmc1-wifi-pwrseq-pins {
+		pinctrl-single,pins = <
+			/* (V19) GPMC0_AD8.GPIO0_23 - WIFI-BT_EN */
+			AM64X_IOPAD(0x005c, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_spi0_pins: main-spi0-pins {
+		pinctrl-single,pins = <
+			/* (D13) SPI0_CLK */
+			AM64X_IOPAD(0x0210, PIN_OUTPUT, 0)
+			/* (D12) SPI0_CS0 */
+			AM64X_IOPAD(0x0208, PIN_OUTPUT, 0)
+			/* (A13) SPI0_D0 */
+			AM64X_IOPAD(0x0214, PIN_OUTPUT, 0)
+			/* (A14) SPI0_D1 */
+			AM64X_IOPAD(0x0218, PIN_INPUT, 0)
+		>;
+	};
+
+	main_spi0_adc_pins: main-spi0-adc-pins {
+		pinctrl-single,pins = <
+			/* (A16) UART0_RTSn.GPIO1_55 - ADC_SYNC */
+			AM64X_IOPAD(0x023c, PIN_INPUT, 7)
+			/* (D16) UART1_CTSn.GPIO1_58 - ADC_RST# */
+			AM64X_IOPAD(0x0248, PIN_OUTPUT, 7)
+			/* (E16) UART1_RTSn.GPIO1_59 - ADC_DATA_RDY */
+			AM64X_IOPAD(0x024c, PIN_INPUT, 7)
+			/* (B19) I2C1_SDA.GPIO1_67 - ADC_INT# */
+			AM64X_IOPAD(0x026c, PIN_INPUT, 7)
+		>;
+	};
+
+	main_uart0_pins: main-uart0-pins {
+		pinctrl-single,pins = <
+			/* (D15) UART0_RXD */
+			AM64X_IOPAD(0x0230, PIN_INPUT, 0)
+			/* (C16) UART0_TXD */
+			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_uart1_pins: main-uart1-pins {
+		pinctrl-single,pins = <
+			/* (E15) UART1_RXD */
+			AM64X_IOPAD(0x0240, PIN_INPUT, 0)
+			/* (E14) UART1_TXD */
+			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)
+		>;
+	};
+
+	main_uart2_pins: main-uart2-pins {
+		pinctrl-single,pins = <
+			/* (T18) GPMC0_AD2.UART2_RTSn */
+			AM64X_IOPAD(0x0044, PIN_OUTPUT, 2)
+			/* (T20) GPMC0_AD0.UART2_RXD */
+			AM64X_IOPAD(0x003c, PIN_INPUT, 2)
+			/* (U21) GPMC0_AD1.UART2_TXD */
+			AM64X_IOPAD(0x0040, PIN_OUTPUT, 2)
+		>;
+	};
+
+	main_uart3_pins: main-uart3-pins {
+		pinctrl-single,pins = <
+			/* (T17) GPMC0_AD9.UART3_CTSn */
+			AM64X_IOPAD(0x0060, PIN_INPUT, 2)
+			/* (U19) GPMC0_AD5.UART3_RTSn */
+			AM64X_IOPAD(0x0050, PIN_OUTPUT, 2)
+			/* (U20) GPMC0_AD3.UART3_RXD */
+			AM64X_IOPAD(0x0048, PIN_INPUT, 2)
+			/* (U18) GPMC0_AD4.UART3_TXD */
+			AM64X_IOPAD(0x004c, PIN_OUTPUT, 2)
+		>;
+	};
+
+	main_uart4_pins: main-uart4-pins {
+		pinctrl-single,pins = <
+			/* (R16) GPMC0_AD10.UART4_CTSn */
+			AM64X_IOPAD(0x0064, PIN_INPUT, 2)
+			/* (R17) GPMC0_CLK.UART4_RTSn */
+			AM64X_IOPAD(0x007c, PIN_OUTPUT, 2)
+			/* (V20) GPMC0_AD6.UART4_RXD */
+			AM64X_IOPAD(0x0054, PIN_INPUT, 2)
+			/* (V21) GPMC0_AD7.UART4_TXD */
+			AM64X_IOPAD(0x0058, PIN_OUTPUT, 2)
+
+			/* Control GPIOs for IOT Module connected to UART4 */
+			/* (D18) ECAP0_IN_APWM_OUT.GPIO1_68 - BG95_PWRKEY */
+			AM64X_IOPAD(0x0270, PIN_OUTPUT, 7)
+			/* (A19) EXT_REFCLK1.GPIO1_69 - BG95_RESET */
+			AM64X_IOPAD(0x0274, PIN_OUTPUT, 7)
+		>;
+	};
+
+	main_uart5_pins: main-uart5-pins {
+		pinctrl-single,pins = <
+			/* (P16) GPMC0_ADVn_ALE.UART5_RXD */
+			AM64X_IOPAD(0x0084, PIN_INPUT, 2)
+			/* (R18) GPMC0_OEn_REn.UART5_TXD */
+			AM64X_IOPAD(0x0088, PIN_OUTPUT, 2)
+		>;
+	};
+
+	main_usb0_pins: main-usb0-pins {
+		pinctrl-single,pins = <
+			/* (E19) USB0_DRVVBUS */
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0)
+		>;
+	};
+
+	pru_icssg1_mdio_pins: pru-icssg1-mdio-pins {
+		pinctrl-single,pins = <
+			/* (A15) SPI1_D1.GPIO1_51 - RESET_PRG1_RGMII1# */
+			AM64X_IOPAD(0x022c, PIN_OUTPUT, 7)
+			/* (B14) SPI1_CS0.GPIO1_47 - RESET_PRG1_RGMII2# */
+			AM64X_IOPAD(0x021c, PIN_OUTPUT, 7)
+
+			/* (Y6) PRG1_MDIO0_MDC */
+			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0)
+			/* (AA6) PRG1_MDIO0_MDIO */
+			AM64X_IOPAD(0x0158, PIN_INPUT, 0)
+		>;
+	};
+
+	pru_icssg1_rgmii1_pins: pru-icssg1-rgmii1-pins {
+		pinctrl-single,pins = <
+			/* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 2)
+			/* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 2)
+			/* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 2)
+			/* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 2)
+			/* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 2)
+			/* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 2)
+			/* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+			AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2)
+			/* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+			AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2)
+			/* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+			AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2)
+			/* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+			AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2)
+			/* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+			AM64X_IOPAD(0x00f8, PIN_OUTPUT, 2)
+			/* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2)
+		>;
+	};
+
+	pru_icssg1_rgmii2_pins: pru-icssg1-rgmii2-pins {
+		pinctrl-single,pins = <
+			/* (W11) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+			AM64X_IOPAD(0x0108, PIN_INPUT, 2)
+			/* (V11) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 2)
+			/* (AA12) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 2)
+			/* (Y12) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 2)
+			/* (U11) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 2)
+			/* (W12) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 2)
+			/* (AA10) PRG1_PRU1_GPO11.PRG1_RGMII2_TD0 */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 2)
+			/* (V10) PRG1_PRU1_GPO12.PRG1_RGMII2_TD1 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 2)
+			/* (U10) PRG1_PRU1_GPO13.PRG1_RGMII2_TD2 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 2)
+			/* (AA11) PRG1_PRU1_GPO14.PRG1_RGMII2_TD3 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 2)
+			/* (Y10) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+			AM64X_IOPAD(0x0148, PIN_OUTPUT, 2)
+			/* (Y11) PRG1_PRU1_GPO15.PRG1_RGMII2_TX_CTL */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 2)
+		>;
+	};
+
+	pwm_fan_pins: pwm-fan-pins {
+		pinctrl-single,pins = <
+			/* (T19) GPMC0_BE1n.EHRPWM5_A */
+			AM64X_IOPAD(0x0094, PIN_OUTPUT, 3)
+			/* (C14) SPI1_CLK.GPIO1_49 - FAN_RPM */
+			AM64X_IOPAD(0x0224, PIN_INPUT, 7)
+		>;
+	};
+
+	pwm_fan_reg_pins: pwm-fan-reg-pins {
+		pinctrl-single,pins = <
+			/* (D14) SPI1_CS1.GPIO1_48 - FAN_PWR */
+			AM64X_IOPAD(0x0220, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	mcu_gpio_keys_pins: mcu-gpio-keys-pins {
+		pinctrl-single,pins = <
+			/* (A7) MCU_SPI1_CS0.MCU_GPIO0_5 */
+			AM64X_MCU_IOPAD(0x0014, PIN_INPUT, 7)
+		>;
+	};
+
+	mcu_gpio_leds_pins: mcu-gpio-leds-pins {
+		pinctrl-single,pins = <
+			/* (C7) MCU_SPI1_D0.MCU_GPIO0_8 */
+			AM64X_MCU_IOPAD(0x0020, PIN_OUTPUT, 7)
+			/* (C8) MCU_SPI1_D1.MCU_GPIO0_9 */
+			AM64X_MCU_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_gpio0_pins: mcu-gpio0-pins {
+		pinctrl-single,pins = <
+			/* (E8) MCU_UART0_RTSn.MCU_GPIO0_0 */
+			AM64X_MCU_IOPAD(0x0034, PIN_INPUT, 7)
+			/* (D8) MCU_UART0_CTSn.MCU_GPIO0_1 */
+			AM64X_MCU_IOPAD(0x0030, PIN_INPUT, 7)
+			/* (B7) MCU_SPI1_CS1.MCU_GPIO0_6 */
+			AM64X_MCU_IOPAD(0x0018, PIN_INPUT, 7)
+			/* (D7) MCU_SPI1_CLK.MCU_GPIO0_7 */
+			AM64X_MCU_IOPAD(0x001c, PIN_INPUT, 7)
+			/* (A11) MCU_I2C1_SCL.MCU_GPIO0_20 */
+			AM64X_MCU_IOPAD(0x0050, PIN_INPUT, 7)
+			/* (B10) MCU_I2C1_SDA.MCU_GPIO0_21 */
+			AM64X_MCU_IOPAD(0x0054, PIN_INPUT, 7)
+		>;
+	};
+
+	mcu_i2c0_pins: mcu-i2c0-pins {
+		pinctrl-single,pins = <
+			/* (E9) MCU_I2C0_SCL */
+			AM64X_MCU_IOPAD(0x0048, PIN_INPUT, 0)
+			/* (A10) MCU_I2C0_SDA */
+			AM64X_MCU_IOPAD(0x004c, PIN_INPUT, 0)
+		>;
+	};
+
+	mcu_spi0_pins: mcu-spi0-pins {
+		pinctrl-single,pins = <
+			/* (E6) MCU_SPI0_CLK */
+			AM64X_MCU_IOPAD(0x0008, PIN_OUTPUT, 0)
+			/* (D6) MCU_SPI0_CS0 */
+			AM64X_MCU_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (C6) MCU_SPI0_CS1 */
+			AM64X_MCU_IOPAD(0x0004, PIN_OUTPUT, 0)
+			/* (E7) MCU_SPI0_D0 */
+			AM64X_MCU_IOPAD(0x000c, PIN_OUTPUT, 0)
+			/* (B6) MCU_SPI0_D1 */
+			AM64X_MCU_IOPAD(0x0010, PIN_INPUT, 0)
+		>;
+	};
+
+	mcu_uart0_pins: mcu-uart0-pins {
+		pinctrl-single,pins = <
+			/* (A9) MCU_UART0_RXD */
+			AM64X_MCU_IOPAD(0x0028, PIN_INPUT, 0)
+			/* (A8) MCU_UART0_TXD */
+			AM64X_MCU_IOPAD(0x002c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	mcu_uart1_pins: mcu-uart1-pins {
+		pinctrl-single,pins = <
+			/* (B8) MCU_UART1_CTSn */
+			AM64X_MCU_IOPAD(0x0040, PIN_INPUT, 0)
+			/* (B9) MCU_UART1_RTSn */
+			AM64X_MCU_IOPAD(0x0044, PIN_OUTPUT, 0)
+			/* (C9) MCU_UART1_RXD */
+			AM64X_MCU_IOPAD(0x0038, PIN_INPUT, 0)
+			/* (D9) MCU_UART1_TXD */
+			AM64X_MCU_IOPAD(0x003c, PIN_OUTPUT, 0)
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
new file mode 100644
index 000000000..6229849b5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, D-82229 Seefeld, Germany.
+ */
+
+#include "k3-am642.dtsi"
+
+/ {
+	aliases {
+		i2c0 = &main_i2c0;
+		mmc0 = &sdhci0;
+		spi0 = &ospi0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 1G RAM - default variant */
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a5000000 {
+			reg = <0x00 0xa5000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tmp1075: temperature-sensor@4a {
+		compatible = "ti,tmp1075";
+		reg = <0x4a>;
+	};
+
+	eeprom0: eeprom@50 {
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+
+	eeprom1: eeprom@54 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <84000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Filled by bootloader */
+		};
+	};
+};
+
+&sdhci0 {
+	non-removable;
+	disable-wp;
+	no-sdio;
+	no-sd;
+	ti,driver-strength-ohm = <50>;
+};
+
+&main_pmx0 {
+	main_i2c0_pins: main-i2c0-pins {
+		pinctrl-single,pins = <
+			/* (A18) I2C0_SCL */
+			AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0)
+			/* (B18) I2C0_SDA */
+			AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0)
+		>;
+	};
+
+	ospi0_pins: ospi0-pins {
+		pinctrl-single,pins = <
+			/* (N20) OSPI0_CLK */
+			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (L19) OSPI0_CSn0 */
+			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0)
+			/* (M19) OSPI0_D0 */
+			AM64X_IOPAD(0x000c, PIN_INPUT, 0)
+			/* (M18) OSPI0_D1 */
+			AM64X_IOPAD(0x0010, PIN_INPUT, 0)
+			/* (M20) OSPI0_D2 */
+			AM64X_IOPAD(0x0014, PIN_INPUT, 0)
+			/* (M21) OSPI0_D3 */
+			AM64X_IOPAD(0x0018, PIN_INPUT, 0)
+			/* (P21) OSPI0_D4 */
+			AM64X_IOPAD(0x001c, PIN_INPUT, 0)
+			/* (P20) OSPI0_D5 */
+			AM64X_IOPAD(0x0020, PIN_INPUT, 0)
+			/* (N18) OSPI0_D6 */
+			AM64X_IOPAD(0x0024, PIN_INPUT, 0)
+			/* (M17) OSPI0_D7 */
+			AM64X_IOPAD(0x0028, PIN_INPUT, 0)
+			/* (N19) OSPI0_DQS */
+			AM64X_IOPAD(0x0008, PIN_INPUT, 0)
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642.dtsi b/arch/arm64/boot/dts/ti/k3-am642.dtsi
new file mode 100644
index 000000000..7a6eedea3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642.dtsi
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM642 SoC family in Dual core configuration
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am64.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x40000>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
new file mode 100644
index 000000000..51f902fa3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1
+ */
+
+&dss {
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&sdhci1 {
+	no-1-8-v;
+};
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
new file mode 100644
index 000000000..e9419c4fe
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2021
+ *
+ * Authors:
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG2
+ */
+
+&main_pmx0 {
+	cp2102n_reset_pin_default: cp2102n-reset-default-pins {
+		pinctrl-single,pins = <
+			/* (AF12) GPIO1_24, used as cp2102 reset */
+			AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2102n_reset_pin_default>;
+	gpio-line-names =
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "CP2102N-RESET";
+};
+
+&dss {
+	/* Workaround needed to get DP clock of 154Mhz */
+	assigned-clocks = <&k3_clks 67 0>;
+};
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 7>, <&k3_clks 153 4>;
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 8>;  /* set PIPE3_TXB_CLK to WIZ8B2M4VSB */
+	phys = <&serdes0 PHY_TYPE_USB3 0>;
+	phy-names = "usb3-phy";
+};
+
+&usb0 {
+	maximum-speed = "super-speed";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
new file mode 100644
index 000000000..b849648d5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -0,0 +1,728 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2
+ */
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		i2c5 = &main_i2c3;
+		spi0 = &mcu_spi0;
+		mmc0 = &sdhci1;
+		mmc1 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: secure-ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0100000 0 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1100000 0 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a2000000 {
+			reg = <0x00 0xa2000000 0x00 0x00200000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		status-led-red {
+			gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		status-led-green {
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led1-red {
+			gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led1-green {
+			gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led2-red {
+			gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		user-led2-green {
+			gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dp_refclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT,  0)
+			/* (AD6) WKUP_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT,  0)
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			/* (AD8) MCU_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT,  0)
+			/* (AD7) MCU_I2C0_SDA */
+			AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT,  0)
+		>;
+	};
+
+	arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-default-pins {
+		pinctrl-single,pins = <
+			/* (R2) WKUP_GPIO0_21 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
+		>;
+	};
+
+	push_button_pins_default: push-button-default-pins {
+		pinctrl-single,pins = <
+			/* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT,  7)
+		>;
+	};
+
+	arduino_uart_pins_default: arduino-uart-default-pins {
+		pinctrl-single,pins = <
+			/* (P4) MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT,  4)
+			/* (P5) MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+		>;
+	};
+
+	arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins {
+		pinctrl-single,pins = <
+			/* (P1) WKUP_GPIO0_31 */
+			AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
+			/* (N3) WKUP_GPIO0_33 */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
+		>;
+	};
+
+	arduino_io_oe_pins_default: arduino-io-oe-default-pins {
+		pinctrl-single,pins = <
+			/* (N4) WKUP_GPIO0_34 */
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
+			/* (M2) WKUP_GPIO0_36 */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
+			/* (M3) WKUP_GPIO0_37 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
+			/* (M4) WKUP_GPIO0_38 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
+			/* (M1) WKUP_GPIO0_41 */
+			AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			/* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0)
+			/* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT,  0)
+			/* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT,  0)
+			/* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT,  0)
+			/* (R4) MCU_OSPI0_CSn0 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	db9_com_mode_pins_default: db9-com-mode-default-pins {
+		pinctrl-single,pins = <
+			/* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */
+			AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7)
+			/* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */
+			AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7)
+			/* (AC1) WKUP_GPIO0_7, used as uart0 term */
+			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7)
+			/* (AC2) WKUP_GPIO0_6, used as uart0 en */
+			AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7)
+		>;
+	};
+
+	leds_pins_default: leds-default-pins {
+		pinctrl-single,pins = <
+			/* (T2) WKUP_GPIO0_17, used as user led1 red */
+			AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7)
+			/* (R3) WKUP_GPIO0_22, used as user led1 green */
+			AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7)
+			/* (R5) WKUP_GPIO0_24, used as status led red */
+			AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7)
+			/* (N2) WKUP_GPIO0_32, used as status led green */
+			AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7)
+		>;
+	};
+
+	mcu_spi0_pins_default: mcu-spi0-default-pins {
+		pinctrl-single,pins = <
+			/* (Y1) MCU_SPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0090, PIN_INPUT,  0)
+			/* (Y3) MCU_SPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0094, PIN_INPUT,  0)
+			/* (Y2) MCU_SPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0098, PIN_INPUT,  0)
+			/* (Y4) MCU_SPI0_CS0 */
+			AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+		>;
+	};
+
+	minipcie_pins_default: minipcie-default-pins {
+		pinctrl-single,pins = <
+			/* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */
+			AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0174, PIN_INPUT,  6)  /* (AE23) UART1_RXD */
+			AM65X_IOPAD(0x014c, PIN_OUTPUT, 6)  /* (AD23) UART1_TXD */
+			AM65X_IOPAD(0x0178, PIN_INPUT,  6)  /* (AD22) UART1_CTSn */
+			AM65X_IOPAD(0x017c, PIN_OUTPUT, 6)  /* (AC21) UART1_RTSn */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c0, PIN_INPUT,  2)  /* (AF13) I2C3_SCL */
+			AM65X_IOPAD(0x01d4, PIN_INPUT,  2)  /* (AG12) I2C3_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0)  /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP,   0)  /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP,   0)  /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP,   0)  /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP,   0)  /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP,   0)  /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP,   0)  /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP,   0)  /* (C24) MMC1_SDWP */
+		>;
+	};
+
+	usb0_pins_default: usb0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0)  /* (AD9) USB0_DRVVBUS */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0)  /* (AC8) USB1_DRVVBUS */
+		>;
+	};
+
+	arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0084, PIN_OUTPUT, 7)  /* (AG18) GPIO0_33 */
+			AM65X_IOPAD(0x008C, PIN_OUTPUT, 7)  /* (AF17) GPIO0_35 */
+			AM65X_IOPAD(0x0098, PIN_OUTPUT, 7)  /* (AH16) GPIO0_38 */
+			AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7)  /* (AH15) GPIO0_43 */
+			AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7)  /* (AG15) GPIO0_48 */
+			AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7)  /* (AD15) GPIO0_51 */
+		>;
+	};
+
+	dss_vout1_pins_default: dss-vout1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_OUTPUT, 1)  /* VOUT1_DATA0 */
+			AM65X_IOPAD(0x0004, PIN_OUTPUT, 1)  /* VOUT1_DATA1 */
+			AM65X_IOPAD(0x0008, PIN_OUTPUT, 1)  /* VOUT1_DATA2 */
+			AM65X_IOPAD(0x000c, PIN_OUTPUT, 1)  /* VOUT1_DATA3 */
+			AM65X_IOPAD(0x0010, PIN_OUTPUT, 1)  /* VOUT1_DATA4 */
+			AM65X_IOPAD(0x0014, PIN_OUTPUT, 1)  /* VOUT1_DATA5 */
+			AM65X_IOPAD(0x0018, PIN_OUTPUT, 1)  /* VOUT1_DATA6 */
+			AM65X_IOPAD(0x001c, PIN_OUTPUT, 1)  /* VOUT1_DATA7 */
+			AM65X_IOPAD(0x0020, PIN_OUTPUT, 1)  /* VOUT1_DATA8 */
+			AM65X_IOPAD(0x0024, PIN_OUTPUT, 1)  /* VOUT1_DATA9 */
+			AM65X_IOPAD(0x0028, PIN_OUTPUT, 1)  /* VOUT1_DATA10 */
+			AM65X_IOPAD(0x002c, PIN_OUTPUT, 1)  /* VOUT1_DATA11 */
+			AM65X_IOPAD(0x0030, PIN_OUTPUT, 1)  /* VOUT1_DATA12 */
+			AM65X_IOPAD(0x0034, PIN_OUTPUT, 1)  /* VOUT1_DATA13 */
+			AM65X_IOPAD(0x0038, PIN_OUTPUT, 1)  /* VOUT1_DATA14 */
+			AM65X_IOPAD(0x003c, PIN_OUTPUT, 1)  /* VOUT1_DATA15 */
+			AM65X_IOPAD(0x0040, PIN_OUTPUT, 1)  /* VOUT1_DATA16 */
+			AM65X_IOPAD(0x0044, PIN_OUTPUT, 1)  /* VOUT1_DATA17 */
+			AM65X_IOPAD(0x0048, PIN_OUTPUT, 1)  /* VOUT1_DATA18 */
+			AM65X_IOPAD(0x004c, PIN_OUTPUT, 1)  /* VOUT1_DATA19 */
+			AM65X_IOPAD(0x0050, PIN_OUTPUT, 1)  /* VOUT1_DATA20 */
+			AM65X_IOPAD(0x0054, PIN_OUTPUT, 1)  /* VOUT1_DATA21 */
+			AM65X_IOPAD(0x0058, PIN_OUTPUT, 1)  /* VOUT1_DATA22 */
+			AM65X_IOPAD(0x005c, PIN_OUTPUT, 1)  /* VOUT1_DATA23 */
+			AM65X_IOPAD(0x0060, PIN_OUTPUT, 1)  /* VOUT1_VSYNC */
+			AM65X_IOPAD(0x0064, PIN_OUTPUT, 1)  /* VOUT1_HSYNC */
+			AM65X_IOPAD(0x0068, PIN_OUTPUT, 1)  /* VOUT1_PCLK */
+			AM65X_IOPAD(0x006c, PIN_OUTPUT, 1)  /* VOUT1_DE */
+		>;
+	};
+
+	dp_pins_default: dp-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0078, PIN_OUTPUT, 7)  /* (AF18) DP rst_n */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0074, PIN_INPUT,  5)  /* (T27) I2C2_SCL */
+			AM65X_IOPAD(0x0070, PIN_INPUT,  5)  /* (R25) I2C2_SDA */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_INPUT,  0)  /* (D20) I2C0_SCL */
+			AM65X_IOPAD(0x0004, PIN_INPUT,  0)  /* (C21) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0008, PIN_INPUT,  0)  /* (B21) I2C1_SCL */
+			AM65X_IOPAD(0x000c, PIN_INPUT,  0)  /* (E21) I2C1_SDA */
+		>;
+	};
+
+	ecap0_pins_default: ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_INPUT,  0)  /* (D21) ECAP0_IN_APWM_OUT */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&arduino_uart_pins_default>;
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
+	gpio-line-names =
+		"main_gpio0-base", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "",
+		"", "", "", "IO4", "", "IO5", "", "", "IO6", "",
+		"", "", "", "IO7", "", "", "", "", "IO8", "",
+		"", "IO9";
+};
+
+&wkup_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&arduino_io_d2_to_d3_pins_default>,
+		<&arduino_i2c_aio_switch_pins_default>,
+		<&arduino_io_oe_pins_default>,
+		<&push_button_pins_default>,
+		<&db9_com_mode_pins_default>;
+	gpio-line-names =
+		/* 0..9 */
+		"wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+		"UART0-enable", "UART0-terminate", "", "WIFI-disable",
+		/* 10..19 */
+		"", "", "", "", "", "", "", "", "", "",
+		/* 20..29 */
+		"", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
+		/* 30..39 */
+		"IO1", "IO2", "", "IO3", "IO17-direction", "A5",
+		"IO16-direction", "IO15-direction", "IO14-direction", "A3",
+		/* 40..49 */
+		"", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
+		"IO11",
+		/* 50..51 */
+		"IO12", "IO10";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	psu: regulator@60 {
+		compatible = "ti,tps62363";
+		reg = <0x60>;
+		regulator-name = "tps62363-vout";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-boot-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		ti,enable-vout-discharge;
+	};
+
+	/* D4200 */
+	pcal9535_1: gpio@20 {
+		compatible = "nxp,pcal9535";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
+			"A5-pull", "", "",
+			"IO14-enable", "IO15-enable", "IO16-enable",
+			"IO17-enable", "IO18-enable", "IO19-enable";
+	};
+
+	/* D4201 */
+	pcal9535_2: gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-direction", "IO1-direction", "IO2-direction",
+			"IO3-direction", "IO4-direction", "IO5-direction",
+			"IO6-direction", "IO7-direction",
+			"IO8-direction", "IO9-direction", "IO10-direction",
+			"IO11-direction", "IO12-direction", "IO13-direction",
+			"IO19-direction";
+	};
+
+	/* D4202 */
+	pcal9535_3: gpio@25 {
+		compatible = "nxp,pcal9535";
+		reg = <0x25>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names =
+			"IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
+			"IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
+			"IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
+			"IO12-pull", "IO13-pull";
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	edp-bridge@f {
+		compatible = "toshiba,tc358767";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pins_default>;
+		reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+		clock-names = "ref";
+		clocks = <&dp_refclk>;
+
+		toshiba,hpd-pin = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+};
+
+&mcu_cpsw {
+	status = "disabled";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_default>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "host";
+};
+
+&mcu_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_spi0_pins_default>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ti,pindir-d0-out-d1-in;
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <50000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			seboot@0 {
+				label = "seboot";
+				reg = <0x0 0x180000>; /* 1.5M */
+			};
+
+			tispl@180000 {
+				label = "tispl";
+				reg = <0x180000 0x200000>; /* 2M */
+			};
+
+			u-boot@380000 {
+				label = "u-boot";
+				reg = <0x380000 0x300000>; /* 3M */
+			};
+
+			env@680000 {
+				label = "env";
+				reg = <0x680000 0x20000>; /* 128K */
+			};
+
+			env-backup@6a0000 {
+				label = "env.backup";
+				reg = <0x6a0000 0x20000>; /* 128K */
+			};
+
+			otpcmd@6c0000 {
+				label = "otpcmd";
+				reg = <0x6c0000 0x10000>; /* 64K */
+			};
+
+			unused@6d0000 {
+				label = "unused";
+				reg = <0x6d0000 0x7b0000>; /* 7872K */
+			};
+
+			seboot-backup@e80000 {
+				label = "seboot.backup";
+				reg = <0xe80000 0x180000>; /* 1.5M */
+			};
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout1_pins_default>;
+
+	assigned-clocks = <&k3_clks 67 2>;
+	assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@1 {
+		reg = <1>;
+
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+		};
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_pins_default>;
+
+	num-lanes = <1>;
+	phys = <&serdes1 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy0";
+	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
new file mode 100644
index 000000000..c98068b6c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -0,0 +1,1532 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/phy/phy-am654-serdes.h>
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x200000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+
+		sysfw-sram@f0000 {
+			reg = <0xf0000 0x10000>;
+		};
+
+		l3cache-sram@100000 {
+			reg = <0x100000 0x100000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0x90000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	serdes0: serdes@900000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x900000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+		clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+		assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+		ti,serdes-clk = <&serdes0_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 0>;
+	};
+
+	serdes1: serdes@910000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x910000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+		clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+		assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+		ti,serdes-clk = <&serdes1_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 1>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	crypto: crypto@4e00000 {
+		compatible = "ti,am654-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+		dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
+				<&main_udmap 0x4003>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled"; /* Used by OP-TEE */
+		};
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x30>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c000 0x0 0x2e4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c2e8 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x11c2e8 0x0 0x24>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 110 1>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 111 1>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 112 1>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 113 1>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ecap0: pwm@3100000 {
+		compatible = "ti,am654-ecap", "ti,am3352-ecap";
+		#pwm-cells = <3>;
+		reg = <0x0 0x03100000 0x0 0x60>;
+		power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 39 0>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2100000 0x0 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 137 1>;
+		power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx0", "rx0";
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2110000 0x0 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 138 1>;
+		power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		assigned-clocks = <&k3_clks 137 1>;
+		assigned-clock-rates = <48000000>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2120000 0x0 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 139 1>;
+		power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2130000 0x0 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 140 1>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x2140000 0x0 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 141 1>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 23 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 23 0>;
+		assigned-clock-parents = <&k3_clks 23 1>;
+		power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 24 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 24 0>;
+		assigned-clock-parents = <&k3_clks 24 1>;
+		power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 27 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 27 0>;
+		assigned-clock-parents = <&k3_clks 27 1>;
+		power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 28 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 28 0>;
+		assigned-clock-parents = <&k3_clks 28 1>;
+		power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 29 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 29 0>;
+		assigned-clock-parents = <&k3_clks 29 1>;
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 30 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 30 0>;
+		assigned-clock-parents = <&k3_clks 30 1>;
+		power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 31 0>;
+		assigned-clocks = <&k3_clks 31 0>;
+		assigned-clock-parents = <&k3_clks 31 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 32 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 32 0>;
+		assigned-clock-parents = <&k3_clks 32 1>;
+		power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 33 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 33 0>;
+		assigned-clock-parents = <&k3_clks 33 1>;
+		power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 34 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 34 0>;
+		assigned-clock-parents = <&k3_clks 34 1>;
+		power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 25 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 25 0>;
+		assigned-clock-parents = <&k3_clks 25 1>;
+		power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 26 0>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 26 0>;
+		assigned-clock-parents = <&k3_clks 26 1>;
+		power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	sdhci0: mmc@4f80000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>;
+		power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 47 0>, <&k3_clks 47 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	sdhci1: mmc@4fa0000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,otap-del-sel-ddr52 = <0x4>;
+		ti,otap-del-sel-hs200 = <0x7>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes0_clk: clock@4080 {
+			compatible = "syscon";
+			reg = <0x00004080 0x4>;
+		};
+
+		serdes1_clk: clock@4090 {
+			compatible = "syscon";
+			reg = <0x00004090 0x4>;
+		};
+
+		serdes_mux: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
+					<0x4090 0x3>; /* SERDES1 lane select */
+		};
+
+		dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 {
+			compatible = "syscon";
+			reg = <0x000041e0 0x14>;
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	dwc3_0: dwc3@4000000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4000000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4000000 0x20000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
+		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
+
+		usb0: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			snps,dis_u3_susphy_quirk;
+		};
+	};
+
+	usb0_phy: phy@4100000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4100000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4000>;
+		clocks = <&k3_clks 151 0>, <&k3_clks 151 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+	};
+
+	dwc3_1: dwc3@4020000 {
+		compatible = "ti,am654-dwc3";
+		reg = <0x0 0x4020000 0x0 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x4020000 0x20000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		dma-coherent;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
+		assigned-clocks = <&k3_clks 152 2>;
+		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+
+		usb1: usb@10000 {
+			compatible = "snps,dwc3";
+			reg = <0x10000 0x10000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "peripheral",
+					  "host",
+					  "otg";
+			maximum-speed = "high-speed";
+			dr_mode = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	usb1_phy: phy@4110000 {
+		compatible = "ti,am654-usb2", "ti,omap-usb2";
+		reg = <0x0 0x4110000 0x0 0x54>;
+		syscon-phy-power = <&scm_conf 0x4020>;
+		clocks = <&k3_clks 152 0>, <&k3_clks 152 1>;
+		clock-names = "wkupclk", "refclk";
+		#phy-cells = <0>;
+	};
+
+	intr_main_gpio: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x0 0x00a00000 0x0 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <100>;
+		ti,interrupt-ranges = <0 392 32>;
+	};
+
+	main_navss: bus@30800000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <118>;
+
+		intr_main_navss: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x0 0x310e0000 0x0 0x2000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <182>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>;
+		};
+
+		inta_main_udmass: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&intr_main_navss>;
+			msi-controller;
+			#interrupt-cells = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <179>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&intr_main_navss>;
+			status = "disabled";
+		};
+
+		ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>,
+			      <0x0 0x31080000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <818>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <187>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,am654-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x100000>,
+			      <0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <188>;
+			ti,ringacc = <&ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&main_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&intr_main_navss 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+
+			main_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&main_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <96>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 57 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <90>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 58 0>;
+		clock-names = "gpio";
+	};
+
+	pcie0_rc: pcie@5500000 {
+		compatible = "ti,am654-pcie-rc";
+		reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000>,
+			 <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&scm_conf 0x210>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		device_type = "pci";
+		status = "disabled";
+	};
+
+	pcie0_ep: pcie-ep@5500000 {
+		compatible = "ti,am654-pcie-ep";
+		reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie@5600000 {
+		compatible = "ti,am654-pcie-rc";
+		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0   0x18020000 0 0x00010000>,
+			 <0x82000000 0 0x18030000 0x0   0x18030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&scm_conf 0x210>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		device_type = "pci";
+		status = "disabled";
+	};
+
+	pcie1_ep: pcie-ep@5600000 {
+		compatible = "ti,am654-pcie-ep";
+		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		ti,syscon-pcie-mode = <&scm_conf 0x4070>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <2>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		status = "disabled";
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 104 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 105 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 106 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	cal: cal@6f03000 {
+		compatible = "ti,am654-cal";
+		reg = <0x0 0x06f03000 0x0 0x400>,
+		      <0x0 0x06f03800 0x0 0x40>;
+		reg-names = "cal_top",
+			    "cal_rx_core0";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		ti,camerrx-control = <&scm_conf 0x40c0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 2 0>;
+		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+			};
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,am65x-dss";
+		reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
+		      <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
+		      <0x0 0x04a06000 0x0 0x1000>, /* vid */
+		      <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
+		      <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
+		      <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
+		      <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+		reg-names = "common", "vidl1", "vid",
+			"ovr1", "ovr2", "vp1", "vp2";
+
+		ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+
+		clocks = <&k3_clks 67 1>,
+			 <&k3_clks 216 1>,
+			 <&k3_clks 67 2>;
+		clock-names = "fck", "vp1", "vp2";
+
+		/*
+		 * Set vp2 clk (DPI_1_IN_CLK) mux to PLL4 via
+		 * DIV1. See "Figure 12-3365. DSS Integration"
+		 * in AM65x TRM for details.
+		 */
+		assigned-clocks = <&k3_clks 67 2>;
+		assigned-clock-parents = <&k3_clks 67 5>;
+
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+
+		dma-coherent;
+
+		dss_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3000000 0x0 0x100>;
+		power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3010000 0x0 0x100>;
+		power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3020000 0x0 0x100>;
+		power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3030000 0x0 0x100>;
+		power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3040000 0x0 0x100>;
+		power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x0 0x3050000 0x0 0x100>;
+		power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	icssg0: icssg@b000000 {
+		compatible = "ti,am654-icssg";
+		reg = <0x00 0xb000000 0x00 0x80000>;
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0xb000000 0x80000>;
+
+		icssg0_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg0_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg0_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 62 19>, /* icssg0_core_clk */
+						 <&k3_clks 62 3>;  /* icssg0_iclk */
+					assigned-clocks = <&icssg0_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 62 3>;
+				};
+
+				icssg0_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 62 10>,	/* icssg0_iep_clk */
+						 <&icssg0_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg0_iepclk_mux>;
+					assigned-clock-parents = <&icssg0_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg0_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg0_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg0_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0_0: pru@34000 {
+			compatible = "ti,am654-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru0_0-fw";
+		};
+
+		rtu0_0: rtu@4000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu0_0-fw";
+		};
+
+		tx_pru0_0: txpru@a000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru0_0-fw";
+		};
+
+		pru0_1: pru@38000 {
+			compatible = "ti,am654-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru0_1-fw";
+		};
+
+		rtu0_1: rtu@6000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu0_1-fw";
+		};
+
+		tx_pru0_1: txpru@c000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru0_1-fw";
+		};
+
+		icssg0_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg1: icssg@b100000 {
+		compatible = "ti,am654-icssg";
+		reg = <0x00 0xb100000 0x00 0x80000>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0xb100000 0x80000>;
+
+		icssg1_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg1_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg1_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 63 19>, /* icssg1_core_clk */
+						 <&k3_clks 63 3>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg1_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 63 3>;
+				};
+
+				icssg1_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 63 10>,	/* icssg1_iep_clk */
+						 <&icssg1_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg1_iepclk_mux>;
+					assigned-clock-parents = <&icssg1_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg1_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg1_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg1_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru1_0: pru@34000 {
+			compatible = "ti,am654-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru1_0-fw";
+		};
+
+		rtu1_0: rtu@4000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu1_0-fw";
+		};
+
+		tx_pru1_0: txpru@a000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru1_0-fw";
+		};
+
+		pru1_1: pru@38000 {
+			compatible = "ti,am654-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru1_1-fw";
+		};
+
+		rtu1_1: rtu@6000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu1_1-fw";
+		};
+
+		tx_pru1_1: txpru@c000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru1_1-fw";
+		};
+
+		icssg1_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 63 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg2: icssg@b200000 {
+		compatible = "ti,am654-icssg";
+		reg = <0x00 0xb200000 0x00 0x80000>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0xb200000 0x80000>;
+
+		icssg2_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg2_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg2_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 64 19>, /* icssg1_core_clk */
+						 <&k3_clks 64 3>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg2_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 64 3>;
+				};
+
+				icssg2_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 64 10>,	/* icssg1_iep_clk */
+						 <&icssg2_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg2_iepclk_mux>;
+					assigned-clock-parents = <&icssg2_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg2_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg2_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg2_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru2_0: pru@34000 {
+			compatible = "ti,am654-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru2_0-fw";
+		};
+
+		rtu2_0: rtu@4000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu2_0-fw";
+		};
+
+		tx_pru2_0: txpru@a000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru2_0-fw";
+		};
+
+		pru2_1: pru@38000 {
+			compatible = "ti,am654-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-pru2_1-fw";
+		};
+
+		rtu2_1: rtu@6000 {
+			compatible = "ti,am654-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-rtu2_1-fw";
+		};
+
+		tx_pru2_1: txpru@c000 {
+			compatible = "ti,am654-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "am65x-txpru2_1-fw";
+		};
+
+		icssg2_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 64 3>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
new file mode 100644
index 000000000..1e536dc41
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_conf: scm-conf@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x10>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000101>;
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000003>;
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x80000>;
+		ranges = <0x0 0x00 0x41c00000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 114 1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40300000 0x0 0x400>;
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 142 1>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40310000 0x0 0x400>;
+		interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 143 1>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40320000 0x0 0x400>;
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 144 1>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 0 2>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 1 2>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		clocks = <&k3_clks 35 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		clocks = <&k3_clks 36 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		clocks = <&k3_clks 37 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		clocks = <&k3_clks 38 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>,
+			      <0x0 0x28440000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg",
+				    "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	m_can0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40528000 0x0 0x400>,
+		      <0x0 0x40500000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	m_can1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40568000 0x0 0x400>,
+		      <0x0 0x40540000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,am654-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 5 10>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 5 10>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&mcu_cpsw_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+
+			mcu_cpsw_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&mcu_cpsw_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,am654-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <159>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 159 1>;
+			firmware-name = "am65x-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "am65x-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_rti1: watchdog@40610000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x40610000 0x0 0x100>;
+		clocks = <&k3_clks 135 0>;
+		power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>;
+		assigned-clocks = <&k3_clks 135 0>;
+		assigned-clock-parents = <&k3_clks 135 4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
new file mode 100644
index 000000000..fd2b998eb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	dmsc: system-controller@44083000 {
+		compatible = "ti,am654-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x44083000 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x43000014 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		reg = <0x4301c000 0x118>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,am654-uart";
+		reg = <0x42300000 0x100>;
+		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x42120000 0x100>;
+		interrupts = <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 115 1>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	intr_wkup_gpio: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x42200000 0x200>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <156>;
+		ti,interrupt-ranges = <0 712 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x42110000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_wkup_gpio>;
+		interrupts = <60>, <61>, <62>, <63>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <56>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 59 0>;
+		clock-names = "gpio";
+	};
+
+	wkup_vtm0: temperature-sensor@42050000 {
+		compatible = "ti,am654-vtm";
+		reg = <0x42050000 0x25c>;
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
new file mode 100644
index 000000000..4d7b6155a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 AM654 SoC";
+	compatible = "ti,am654";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 /* MCUSS Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
+
+		cbass_mcu: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /*  FSS OSPI0 data region 1 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/
+
+			cbass_wakeup: bus@42040000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/* WKUP  Basic peripherals */
+				ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
+			};
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
new file mode 100644
index 000000000..5ab434c02
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic variant, PG1 and PG2
+ */
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 1G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+
+	cpus {
+		cpu-map {
+			/delete-node/ cluster1;
+		};
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	/delete-node/ l2-cache1;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "disabled";
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT,  0)  /* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)  /* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT,  0)  /* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)  /* (AD11) UART0_RTSn */
+			AM65X_IOPAD(0x0188, PIN_INPUT,  1)  /* (D25) UART0_DCDn */
+			AM65X_IOPAD(0x018c, PIN_INPUT,  1)  /* (B26) UART0_DSRn */
+			AM65X_IOPAD(0x0190, PIN_OUTPUT, 1)  /* (A24) UART0_DTRn */
+			AM65X_IOPAD(0x0194, PIN_INPUT,  1)  /* (E24) UART0_RIN */
+		>;
+	};
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on Basic boards */
+	ti,cluster-mode = <0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
new file mode 100644
index 000000000..c62549a4b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 2
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Basic PG2";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
new file mode 100644
index 000000000..87928ff28
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant, Product Generation 1
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6528-iot2050-basic-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-basic", "ti,am654";
+	model = "SIMATIC IOT2050 Basic";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
new file mode 100644
index 000000000..3be92c39e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * OLDI-LCD1EVM Rocktech integrated panel and touch DT overlay for AM654-EVM.
+ * Panel Link: https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT
+ * AM654 LCD EVM: https://www.ti.com/tool/TMDSLCD1EVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	display0 {
+		compatible = "rocktech,rk101ii01d-ct";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&pca9555 8 GPIO_ACTIVE_HIGH>;
+		port {
+			lcd_in0: endpoint {
+				remote-endpoint = <&oldi_out0>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels =
+			<0 32 64 96 128 160 192 224 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+
+		oldi_out0: endpoint {
+			remote-endpoint = <&lcd_in0>;
+		};
+	};
+};
+
+&main_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt928";
+		reg = <0x14>;
+
+		interrupt-parent = <&pca9554>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+
+		reset-gpios = <&pca9555 9 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&pca9554 3 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
new file mode 100644
index 000000000..f5c26e9fb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,am654-evm", "ti,am654";
+	model = "Texas Instruments AM654 Base Board";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &main_i2c0;
+		i2c3 = &main_i2c1;
+		i2c4 = &main_i2c2;
+		ethernet0 = &cpsw_port1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: secure-ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa0100000 0 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1000000 0 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa1100000 0 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a2000000 {
+			reg = <0x00 0xa2000000 0x00 0x00100000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&push_button_pins_default>;
+
+		switch-5 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-6 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc3v3_io: regulator-1 {
+		/* Output of TPS54334 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&evm_12v0>;
+	};
+
+	vdd_mmc1_sd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc3v3_io>;
+		gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	vtt_supply: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ddr_vtt_pins_default>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc3v3_io>;
+		gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0)	/* (AB1) WKUP_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0)	/* (AB5) WKUP_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1)	/* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1)	/* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+		>;
+	};
+
+	ddr_vtt_pins_default: ddr-vtt-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)	/* WKUP_GPIO0_28 */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
+		>;
+	};
+
+	push_button_pins_default: push-button-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
+			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
+			AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)	 /* (U2) MCU_OSPI0_DQS */
+			AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* (U4) MCU_OSPI0_D0 */
+			AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* (U5) MCU_OSPI0_D1 */
+			AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* (T2) MCU_OSPI0_D2 */
+			AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* (T3) MCU_OSPI0_D3 */
+			AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* (T4) MCU_OSPI0_D4 */
+			AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* (T5) MCU_OSPI0_D5 */
+			AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* (R2) MCU_OSPI0_D6 */
+			AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* (R3) MCU_OSPI0_D7 */
+			AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	wkup_pca554_default: wkup-pca554-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)	/* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
+			AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)	/* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
+			AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4)	/* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
+			AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4)	/* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
+			AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
+			AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
+			AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
+			AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
+			AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
+			AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
+			AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
+			AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
+			AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
+			AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */
+			AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT,  0) /* (AD8) MCU_I2C0_SCL */
+			AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT,  0) /* (AD7) MCU_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01e4, PIN_INPUT, 0)	/* (AF11) UART0_RXD */
+			AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0)	/* (AE11) UART0_TXD */
+			AM65X_IOPAD(0x01ec, PIN_INPUT, 0)	/* (AG11) UART0_CTSn */
+			AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0)	/* (AD11) UART0_RTSn */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
+			AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
+		>;
+	};
+
+	main_spi0_pins_default: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
+			AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
+			AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */
+			AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */
+		>;
+	};
+
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+			AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
+		>;
+	};
+
+	usb1_pins_default: usb1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
+			AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
+			AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
+		>;
+	};
+
+	ecap0_pins_default: ecap0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* AT24CM01 */
+		compatible = "atmel,24c1024";
+		reg = <0x50>;
+	};
+
+	vdd_mpu: regulator@60 {
+		compatible = "ti,tps62363";
+		reg = <0x60>;
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <500000>;
+		regulator-max-microvolt = <1770000>;
+		regulator-always-on;
+		regulator-boot-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		ti,enable-vout-discharge;
+	};
+
+	pca9554: gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wkup_pca554_default>;
+		interrupt-parent = <&wkup_gpio0>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	pca9555: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&main_spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_spi0_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	ti,pindir-d0-out-d1-in;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <1>;
+		spi-max-frequency = <48000000>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+/*
+ * Because of erratas i2025 and i2026 for silicon revision 1.0, the
+ * SD card interface might fail. Boards with sr1.0 are recommended to
+ * disable sdhci1
+ */
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1_sd>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_default>;
+	dr_mode = "otg";
+};
+
+&dwc3_0 {
+	status = "disabled";
+};
+
+&usb0_phy {
+	status = "disabled";
+};
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&serdes0 {
+	status = "disabled";
+};
+
+&serdes1 {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition@6a0000 {
+				label = "ospi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fe0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
new file mode 100644
index 000000000..9021c7380
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+mpu0_thermal: mpu0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		mpu0_crit: mpu0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mpu1_thermal: mpu1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		mpu1_crit: mpu1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+mcu_thermal: mcu-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		mcu_crit: mcu-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi
new file mode 100644
index 000000000..888567b92
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC family in Quad core configuration
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu3: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-am654-industrial-thermal.dtsi"
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
new file mode 100644
index 000000000..be55494b1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * Common bits of the IOT2050 Advanced variant, PG1 and PG2
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+	};
+};
+
+&main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)  /* (B25) MMC0_CLK */
+			AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP,   0)  /* (B27) MMC0_CMD */
+			AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP,   0)  /* (A26) MMC0_DAT0 */
+			AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP,   0)  /* (E25) MMC0_DAT1 */
+			AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP,   0)  /* (C26) MMC0_DAT2 */
+			AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP,   0)  /* (A25) MMC0_DAT3 */
+			AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP,   0)  /* (E24) MMC0_DAT4 */
+			AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP,   0)  /* (A24) MMC0_DAT5 */
+			AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP,   0)  /* (B26) MMC0_DAT6 */
+			AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP,   0)  /* (D25) MMC0_DAT7 */
+			AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP,  7)  /* (B23) MMC0_SDWP */
+			AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP,   0)  /* (A23) MMC0_SDCD */
+			AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
+		>;
+	};
+};
+
+/* eMMC */
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
new file mode 100644
index 000000000..774eb14ac
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2023
+ *
+ * Authors:
+ *   Chao Zeng <chao.zeng@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 M.2 variant (based on Advanced Product
+ * Generation 2), 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-m2", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced M2";
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
+
+&main_pmx0 {
+	main_m2_enable_pins_default: main-m2-enable-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
+		>;
+	};
+
+	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
+		>;
+	};
+
+	main_pmx0_m2_config_pins_default: main-pmx0-m2-config-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x01c8, PIN_INPUT_PULLUP, 7)  /* (AE13) GPIO1_18 */
+			AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7)  /* (AD13) GPIO1_19 */
+		>;
+	};
+
+	main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7)  /* (AG22) GPIO0_82 */
+			AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7)  /* (AE20) GPIO0_88 */
+			AM65X_IOPAD(0x0164, PIN_INPUT_PULLUP, 7)  /* (AF19) GPIO0_89 */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_pmx1_m2_config_pins_default: main-pmx1-m2-config-default-pins {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x0018, PIN_INPUT_PULLUP, 7)  /* (B22) GPIO1_88 */
+			AM65X_IOPAD(0x001c, PIN_INPUT_PULLUP, 7)  /* (C23) GPIO1_89 */
+		>;
+	};
+};
+
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&main_m2_pcie_mux_control>,
+		<&arduino_io_d4_to_d9_pins_default>;
+};
+
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 =
+		<&main_m2_enable_pins_default>,
+		<&main_pmx0_m2_config_pins_default>,
+		<&main_pmx1_m2_config_pins_default>,
+		<&cp2102n_reset_pin_default>;
+};
+
+/*
+ * Base configuration for B-key slot with PCIe x2, E-key with USB 2.0 only.
+ * Firmware switches to other modes via device tree overlays.
+ */
+
+&serdes0 {
+	assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+	assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+};
+
+&pcie0_rc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_bkey_pcie_reset>;
+
+	num-lanes = <2>;
+	phys = <&serdes0 PHY_TYPE_PCIE 1>, <&serdes1 PHY_TYPE_PCIE 1>;
+	phy-names = "pcie-phy0","pcie-phy1";
+	reset-gpios = <&main_gpio1 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
+
+&dwc3_0 {
+	assigned-clock-parents = <&k3_clks 151 4>,  /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
+				 <&k3_clks 151 9>;  /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
+	/delete-property/ phys;
+	/delete-property/ phy-names;
+};
+
+&usb0 {
+	maximum-speed = "high-speed";
+	/delete-property/ snps,dis-u1-entry-quirk;
+	/delete-property/ snps,dis-u2-entry-quirk;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
new file mode 100644
index 000000000..f00dc86d0
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 2
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg2.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced-pg2", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced PG2";
+};
+
+&mcu_r5fss0 {
+	/* lock-step mode not supported on this board */
+	ti,cluster-mode = <0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
new file mode 100644
index 000000000..077f165bd
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *   Le Jin <le.jin@siemens.com>
+ *   Jan Kiszka <jan.kiszka@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant, Product Generation 1
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ *
+ * Product homepage:
+ * https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
+ */
+
+/dts-v1/;
+
+#include "k3-am6548-iot2050-advanced-common.dtsi"
+#include "k3-am65-iot2050-common-pg1.dtsi"
+
+/ {
+	compatible = "siemens,iot2050-advanced", "ti,am654";
+	model = "SIMATIC IOT2050 Advanced";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
new file mode 100644
index 000000000..5df594668
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -0,0 +1,555 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Base Board: https://www.ti.com/lit/zip/SPRR463
+ */
+
+/dts-v1/;
+
+#include "k3-am68-sk-som.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,am68-sk", "ti,j721s2";
+	model = "Texas Instruments AM68 SK";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc1 = &main_sdhci1;
+		can0 = &mcu_mcan0;
+		can1 = &mcu_mcan1;
+		can2 = &main_mcan6;
+		can3 = &main_mcan7;
+	};
+
+	vusb_main: regulator-vusb-main5v0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb-main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5141 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-tlv71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver3: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	transceiver4: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	connector-hdmi {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins_default>;
+		ddc-i2c-bus = <&mcu_i2c1>;
+		/* HDMI_HPD */
+		hpd-gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	bridge-dvi {
+		compatible = "ti,tfp410";
+		/* HDMI_PDn */
+		powerdown-gpios = <&exp2 0 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi_out0>;
+					pclk-sample = <1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart8_pins_default: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c4, PIN_INPUT, 7) /* (AB26) ECAP0_IN_APWM_OUT.GPIO0_49 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
+	main_mcan6_pins_default: main-mcan6-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x098, PIN_INPUT, 0) /* (V25) MCASP0_AXR10.MCAN6_RX */
+			J721S2_IOPAD(0x094, PIN_INPUT, 0) /* (AA25) MCASP0_AXR9.MCAN6_TX */
+		>;
+	};
+
+	main_mcan7_pins_default: main-mcan7-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0a0, PIN_INPUT, 0) /* (AB25) MCASP0_AXR12.MCAN7_RX */
+			J721S2_IOPAD(0x09c, PIN_INPUT, 0) /* (T24) MCASP0_AXR11.MCAN7_TX */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */
+			J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0a8, PIN_INPUT, 7) /* (U24)  MCASP0_AXR14.GPIO0_42 */
+			J721S2_IOPAD(0x090, PIN_INPUT, 7) /* (W24) MCASP0_AXR8.GPIO0_36 */
+			J721S2_IOPAD(0x0bc, PIN_INPUT, 7) /* (V28) MCASP1_AFSX.GPIO0_47 */
+			J721S2_IOPAD(0x06c, PIN_INPUT, 7) /* (V26) MCAN1_TX.GPIO0_27 */
+			J721S2_IOPAD(0x004, PIN_INPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */
+			J721S2_IOPAD(0x008, PIN_INPUT, 7) /* (AC24) MCAN12_RX.GPIO0_2 */
+			J721S2_IOPAD(0x0b8, PIN_INPUT, 7) /* (AA24) MCASP1_ACLKX.GPIO0_46 */
+			J721S2_IOPAD(0x00c, PIN_INPUT, 7) /* (AE28) MCAN13_TX.GPIO0_3 */
+			J721S2_IOPAD(0x034, PIN_INPUT, 7) /* (AD24) PMIC_WAKE0.GPIO0_13 */
+			J721S2_IOPAD(0x0a4, PIN_INPUT, 7) /* (T23) MCASP0_AXR13.GPIO0_41 */
+			J721S2_IOPAD(0x0c0, PIN_INPUT, 7) /* (T28) MCASP1_AXR0.GPIO0_48 */
+			J721S2_IOPAD(0x0b4, PIN_INPUT, 7) /* (U25) MCASP1_AXR4.GPIO0_45 */
+			J721S2_IOPAD(0x0cc, PIN_INPUT, 7) /* (AE27) SPI0_CS0.GPIO0_51 */
+			J721S2_IOPAD(0x08c, PIN_INPUT, 7) /* (T25) MCASP0_AXR7.GPIO0_35 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x074, PIN_OUTPUT, 2) /* (R28) MCAN2_TX.VOUT0_DATA0 */
+			J721S2_IOPAD(0x070, PIN_OUTPUT, 2) /* (R27) MCAN1_RX.VOUT0_DATA1 */
+			J721S2_IOPAD(0x04c, PIN_OUTPUT, 2) /* (V27) MCASP1_AXR1.VOUT0_DATA10 */
+			J721S2_IOPAD(0x048, PIN_OUTPUT, 2) /* (AB27) MCASP0_AXR2.VOUT0_DATA11 */
+			J721S2_IOPAD(0x044, PIN_OUTPUT, 2) /* (Y26) MCASP0_AXR1.VOUT0_DATA12 */
+			J721S2_IOPAD(0x040, PIN_OUTPUT, 2) /* (AC28) MCASP0_AXR0.VOUT0_DATA13 */
+			J721S2_IOPAD(0x03c, PIN_OUTPUT, 2) /* (U27) MCASP0_AFSX.VOUT0_DATA14 */
+			J721S2_IOPAD(0x038, PIN_OUTPUT, 2) /* (AB28) MCASP0_ACLKX.VOUT0_DATA15 */
+			J721S2_IOPAD(0x0c8, PIN_OUTPUT, 2) /* (AD28) EXT_REFCLK1.VOUT0_DATA16 */
+			J721S2_IOPAD(0x030, PIN_OUTPUT, 2) /* (T26) GPIO0_12.VOUT0_DATA17 */
+			J721S2_IOPAD(0x02c, PIN_OUTPUT, 2) /* (V23) GPIO0_11.VOUT0_DATA18 */
+			J721S2_IOPAD(0x028, PIN_OUTPUT, 2) /* (AB24) MCAN16_RX.VOUT0_DATA19 */
+			J721S2_IOPAD(0x07c, PIN_OUTPUT, 2) /* (T27) MCASP0_AXR3.VOUT0_DATA2 */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 2) /* (Y28) MCAN16_TX.VOUT0_DATA20 */
+			J721S2_IOPAD(0x020, PIN_OUTPUT, 2) /* (AA23) MCAN15_RX.VOUT0_DATA21 */
+			J721S2_IOPAD(0x01c, PIN_OUTPUT, 2) /* (Y24) MCAN15_TX.VOUT0_DATA22 */
+			J721S2_IOPAD(0x018, PIN_OUTPUT, 2) /* (W23) MCAN14_RX.VOUT0_DATA23 */
+			J721S2_IOPAD(0x068, PIN_OUTPUT, 2) /* (U28) MCAN0_RX.VOUT0_DATA3 */
+			J721S2_IOPAD(0x064, PIN_OUTPUT, 2) /* (W28) MCAN0_TX.VOUT0_DATA4 */
+			J721S2_IOPAD(0x060, PIN_OUTPUT, 2) /* (AC27) MCASP2_AXR1.VOUT0_DATA5 */
+			J721S2_IOPAD(0x05c, PIN_OUTPUT, 2) /* (AA26) MCASP2_AXR0.VOUT0_DATA6 */
+			J721S2_IOPAD(0x058, PIN_OUTPUT, 2) /* (AA27) MCASP2_AFSX.VOUT0_DATA7 */
+			J721S2_IOPAD(0x054, PIN_OUTPUT, 2) /* (Y27) MCASP2_ACLKX.VOUT0_DATA8 */
+			J721S2_IOPAD(0x050, PIN_OUTPUT, 2) /* (W27) MCASP1_AXR2.VOUT0_DATA9 */
+			J721S2_IOPAD(0x084, PIN_OUTPUT, 2) /* (AA28) MCASP0_AXR5.VOUT0_DE */
+			J721S2_IOPAD(0x080, PIN_OUTPUT, 2) /* (U26) MCASP0_AXR4.VOUT0_HSYNC */
+			J721S2_IOPAD(0x078, PIN_OUTPUT, 2) /* (Y25) MCAN2_RX.VOUT0_PCLK */
+			J721S2_IOPAD(0x088, PIN_OUTPUT, 2) /* (AD27) MCASP0_AXR6.VOUT0_VP0_VSYNC */
+		>;
+	};
+
+	hdmi_hpd_pins_default: hdmi-hpd-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x000, PIN_INPUT, 7) /* (AG24) EXTINTN.GPIO0_0  */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x02C, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x00C, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x06C, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /* (C23) WKUP_GPIO0_4.MCU_MCAN1_TX*/
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0a0, PIN_INPUT, 0) /* (G24) MCU_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x0a4, PIN_INPUT, 0) /* (J25) MCU_I2C0_SDA */
+		>;
+	};
+
+	mcu_i2c1_pins_default: mcu-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x078, PIN_INPUT, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721S2_WKUP_IOPAD(0x07c, PIN_INPUT, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */
+			J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */
+			J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) MCU_SPI1_D1.WKUP_GPIO0_2 */
+			J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) MCU_SPI1_CLK.WKUP_GPIO0_0 */
+			J721S2_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (D25) MCU_SPI1_CS2.WKUP_GPIO0_15*/
+			J721S2_WKUP_IOPAD(0x0B8, PIN_INPUT, 7) /* (G27) WKUP_GPIO0_56 */
+			J721S2_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (J26) WKUP_GPIO0_57 */
+			J721S2_WKUP_IOPAD(0x11C, PIN_INPUT, 7) /* (J27) WKUP_GPIO0_67 */
+			J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */
+		>;
+	};
+};
+
+&wkup_pmx3 {
+	mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
+		>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_rpi_header_gpio0_pins0_default>, <&mcu_rpi_header_gpio0_pins1_default>;
+};
+
+&wkup_uart0 {
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = " ", " ", " ", " ", " ",
+				  "BOARDID_EEPROM_WP", "CAN_STB", " ",
+				  "GPIO_uSD_PWR_EN", " ", "IO_EXP_PCIe1_M.2_RTSz",
+				  "IO_EXP_MCU_RGMII_RST#", " ", " ", " ", " ";
+	};
+};
+
+&main_i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&mcu_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c1_pins_default>;
+	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
+	clock-frequency = <100000>;
+
+	exp2: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_PDn","HDMI_LS_OE",
+				  "DP0_3V3_EN","eDP_ENABLE";
+	};
+};
+
+&main_sdhci1 {
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan6_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan7 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan7_pins_default>;
+	phys = <&transceiver4>;
+};
+
+&dss {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+	assigned-clocks = <&k3_clks 158 2>,
+			  <&k3_clks 158 5>,
+			  <&k3_clks 158 14>,
+			  <&k3_clks 158 18>;
+	assigned-clock-parents = <&k3_clks 158 3>,
+				 <&k3_clks 158 7>,
+				 <&k3_clks 158 16>,
+				 <&k3_clks 158 22>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* HDMI */
+	port@1 {
+		reg = <1>;
+
+		dpi_out0: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
new file mode 100644
index 000000000..6c9139f73
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x098, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x09c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
new file mode 100644
index 000000000..069937091
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Design Files: https://www.ti.com/lit/zip/SPRR466
+ * TRM: https://www.ti.com/lit/zip/spruj52
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j784s4.dtsi"
+
+/ {
+	compatible = "ti,am69-sk", "ti,j784s4";
+	model = "Texas Instruments AM69 SK";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c3 = &main_i2c0;
+		ethernet0 = &mcu_cpsw_port1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 32G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x07 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+	};
+
+	vusb_main: regulator-vusb-main5v0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb-main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM61460 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5143 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-tlv71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	bootph-all;
+	main_uart8_pins_default: main-uart8-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
+			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0BC, PIN_INPUT, 7) /* (AD33) MCASP1_AFSX.GPIO0_47 */
+			J784S4_IOPAD(0x06C, PIN_INPUT, 7) /* (AJ37) MCASP4_AFSX.GPIO0_27 */
+			J784S4_IOPAD(0x0B4, PIN_INPUT, 7) /* (AL34) MCASP1_AXR4.GPIO0_45 */
+			J784S4_IOPAD(0x0C0, PIN_INPUT, 7) /* (AD38) MCASP1_AXR0.GPIO0_48 */
+			J784S4_IOPAD(0x00C, PIN_INPUT, 7) /* (AF33) MCAN13_TX.GPIO0_3 */
+			J784S4_IOPAD(0x0B8, PIN_INPUT, 7) /* (AC34) MCASP1_ACLKX.GPIO0_46 */
+			J784S4_IOPAD(0x090, PIN_INPUT, 7) /* (AC35) MCASP0_AXR8.GPIO0_36 */
+			J784S4_IOPAD(0x0A8, PIN_INPUT, 7) /* (AF34) MCASP0_AXR14.GPIO0_42 */
+			J784S4_IOPAD(0x0A4, PIN_INPUT, 7) /* (AJ36) MCASP0_AXR13.GPIO0_41 */
+			J784S4_IOPAD(0x034, PIN_INPUT, 7) /* (AJ34) PMIC_WAKE0n.GPIO0_13 */
+			J784S4_IOPAD(0x0CC, PIN_INPUT, 7) /* (AM37) SPI0_CS0.GPIO0_51 */
+			J784S4_IOPAD(0x08C, PIN_INPUT, 7) /* (AE35) MCASP0_AXR7.GPIO0_35 */
+			J784S4_IOPAD(0x008, PIN_INPUT, 7) /* (AJ33) MCAN12_RX.GPIO0_2 */
+			J784S4_IOPAD(0x004, PIN_INPUT, 7) /* (AG36) MCAN12_TX.GPIO0_1 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0a0, PIN_INPUT_PULLUP, 0) /* (M35) MCU_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x0a4, PIN_INPUT_PULLUP, 0) /* (G34) MCU_I2C0_SDA */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_rpi_hdr1_gpio0_pins_default: mcu-rpi-hdr1-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (N34) WKUP_GPIO0_66 */
+			J784S4_WKUP_IOPAD(0x05c, PIN_INPUT, 7) /* (J34) WKUP_GPIO0_1 */
+			J784S4_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (J35) WKUP_GPIO0_2 */
+			J784S4_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (H38) WKUP_GPIO0_0 */
+			J784S4_WKUP_IOPAD(0x0b8, PIN_INPUT, 7) /* (M37) WKUP_GPIO0_56 */
+			J784S4_WKUP_IOPAD(0x114, PIN_INPUT, 7) /* (M36) WKUP_GPIO0_57 */
+			J784S4_WKUP_IOPAD(0x094, PIN_INPUT, 7) /* (K37) WKUP_GPIO0_15 */
+			J784S4_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (J36) WKUP_GPIO0_3 */
+			J784S4_WKUP_IOPAD(0x11c, PIN_INPUT, 7) /* (M34) WKUP_GPIO0_67 */
+		>;
+	};
+};
+
+&wkup_pmx3 {
+	mcu_rpi_hdr2_gpio0_pins_default: mcu-rpi-hdr2-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0, PIN_INPUT, 7) /* (M33) WKUP_GPIO0_49 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_rpi_hdr1_gpio0_pins_default>, <&mcu_rpi_hdr2_gpio0_pins_default>;
+};
+
+&mcu_uart0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&mcu_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_uart8 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names	= "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN",
+				"IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#",
+				"IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz",
+				"PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz",
+				"ENET1_I2CMUX_SEL", "PCIe0_CLKREQ#", "PCIe1_M.2_CLKREQ#",
+				"PCIe3_M2_CLKREQ#", "PCIe0_PRSNT2#_1", "PCIe0_PRSNT2#_2";
+	};
+};
+
+&main_sdhci0 {
+	bootph-all;
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	bootph-all;
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&mcu_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcu_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&mcu_phy0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
new file mode 100644
index 000000000..cee2b4b0e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,j7200-evm", "ti,j7200";
+	model = "Texas Instruments J7200 EVM";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial5 = &main_uart3;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) MCU_UART0_TXD */
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) MCU_UART0_RTSn */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x0004, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0008, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x000c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0010, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x002c, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0018, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+		>;
+	};
+
+	wkup_gpio_pins_default: wkup-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x70, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0034, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0030, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
+			J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
+			J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
+			J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb8, PIN_INPUT, 0) /* (T18) UART1_RXD */
+			J721E_IOPAD(0xbc, PIN_INPUT, 0) /* (T20) UART1_TXD */
+		>;
+	};
+
+	main_uart3_pins_default: main-uart3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x60, PIN_INPUT, 11) /* (T15) MCAN8_TX.UART3_CTSn */
+			J721E_IOPAD(0x30, PIN_INPUT, 11) /* (Y18) MCAN2_TX.UART3_RXD */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */
+			J721E_IOPAD(0xe0, PIN_INPUT_PULLUP, 3) /* (T3) EXT_REFCLK1.I2C1_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x104, PIN_INPUT, 0) /* (M20) MMC1_CMD */
+			J721E_IOPAD(0x100, PIN_INPUT, 0) /* (P21) MMC1_CLK */
+			J721E_IOPAD(0xfc, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0xf8, PIN_INPUT, 0) /* (M19) MMC1_DAT0 */
+			J721E_IOPAD(0xf4, PIN_INPUT, 0) /* (N21) MMC1_DAT1 */
+			J721E_IOPAD(0xf0, PIN_INPUT, 0) /* (N20) MMC1_DAT2 */
+			J721E_IOPAD(0xec, PIN_INPUT, 0) /* (N19) MMC1_DAT3 */
+			J721E_IOPAD(0xe4, PIN_INPUT, 8) /* (V1) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */
+		>;
+	};
+};
+
+&main_pmx1 {
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	clock-frequency = <96000000>;
+};
+
+&main_uart0 {
+	status = "okay";
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+	status = "okay";
+	/* Default pinmux */
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_uart2 {
+	/* MAIN UART 2 is used by R5F firmware */
+	status = "reserved";
+};
+
+&main_uart3 {
+	/* Shared with MCAN Interface */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart3_pins_default>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_gpio_pins_default>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+/*
+ * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be
+ * swapped on the CPB.
+ *
+ * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3.
+ * The i2c1 of the CPB (as it is labeled) is not connected to j7200.
+ */
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn",
+				  "UB926_LOCK", "UB926_PWR_SW_CNTRL",
+				  "UB926_TUNER_RESET", "UB926_GPIO_SPARE", "";
+	};
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
+		      <J7200_SERDES0_LANE2_QSGMII_LANE1>, <J7200_SERDES0_LANE3_IP4_UNUSED>;
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 3 */
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&tscadc0 {
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 3>;
+	};
+};
+
+&pcie1_rc {
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie1_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
new file mode 100644
index 000000000..32d905235
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J7200 board.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "k3-pinctrl.h"
+#include "k3-serdes.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw5g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw5g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw5g_phy0: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw5g_phy1: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw5g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw5g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "qsgmii-pwrdn-line";
+	};
+};
+
+&main_pmx0 {
+	mdio0_pins_default: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */
+			J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
new file mode 100644
index 000000000..cdb1d6b2a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -0,0 +1,1284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	serdes_refclk: serdes-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+	};
+};
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x100000>;
+
+		atf-sram@0 {
+			reg = <0x00 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */
+		};
+
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j7200-cpsw5g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <1>;
+			reg = <0x4044 0x10>;
+			#phy-cells = <1>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <199>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x3c000000 0x00 0x400000>,
+			      <0x00 0x38000000 0x00 0x400000>,
+			      <0x00 0x31120000 0x00 0x100>,
+			      <0x00 0x33000000 0x00 0x40000>,
+			      <0x00 0x31080000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x00 0x31150000 0x00 0x100>,
+			      <0x00 0x34000000 0x00 0x100000>,
+			      <0x00 0x35000000 0x00 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j7200-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0xc000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+		clocks = <&k3_clks 19 33>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+		};
+
+		cpsw5g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 33>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104200 0x0 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x000001ff>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x104280 0x0 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c000 0x00 0x10c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_pmx1: pinctrl@11c11c {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c11c 0x00 0xc>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 1>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 1>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 1>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 1>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 1>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 1>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x2060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 1>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 91 0>, <&k3_clks 91 3>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 92 1>, <&k3_clks 92 2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j721e-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 11>, <&k3_clks 292 85>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+		assigned-clocks = <&k3_clks 292 85>;
+		assigned-clock-parents = <&k3_clks 292 89>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll0_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_pll1_refclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 85>, <&serdes_refclk>;
+			clock-output-names = "wiz0_refclk_dig";
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 85>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&wiz0_pll0_refclk>;
+			clock-names = "refclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		cdns,no-bar-match-nbits = <64>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00f>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 6>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 288 12>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+			cdns,phyrst-a-enable;
+		};
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>,
+			     <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>,
+			     <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>,
+			     <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>,
+			     <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <69>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 266 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 267 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 268 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 269 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 270 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 271 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 272 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 273 1>;
+		status = "disabled";
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2200000 0x0 0x100>;
+		clocks = <&k3_clks 252 1>;
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 252 1>;
+		assigned-clock-parents = <&k3_clks 252 5>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		clocks = <&k3_clks 253 1>;
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 253 1>;
+		assigned-clock-parents = <&k3_clks 253 5>;
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 49 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 49 1>;
+		assigned-clock-parents = <&k3_clks 49 2>;
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 50 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 50 1>, <&k3_clks 313 0>;
+		assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 313 1>;
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 51 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 51 1>;
+		assigned-clock-parents = <&k3_clks 51 2>;
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 52 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 52 1>, <&k3_clks 314 0>;
+		assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 314 1>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 53 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 53 1>;
+		assigned-clock-parents = <&k3_clks 53 2>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 54 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 54 1>, <&k3_clks 315 0>;
+		assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 315 1>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 55 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 55 1>;
+		assigned-clock-parents = <&k3_clks 55 2>;
+		power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 57 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 57 1>, <&k3_clks 316 0>;
+		assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 316 1>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 58 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 58 1>;
+		assigned-clock-parents = <&k3_clks 58 2>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 59 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 59 1>, <&k3_clks 317 0>;
+		assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 317 1>;
+		power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 60 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 60 1>;
+		assigned-clock-parents = <&k3_clks 60 2>;
+		power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 62 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 62 1>, <&k3_clks 318 0>;
+		assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 318 1>;
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 63 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 63 1>;
+		assigned-clock-parents = <&k3_clks 63 2>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 64 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 64 1>, <&k3_clks 319 0>;
+		assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 319 1>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 65 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 65 1>;
+		assigned-clock-parents = <&k3_clks 65 2>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 66 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 66 1>, <&k3_clks 320 0>;
+		assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 320 1>;
+		power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 67 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 67 1>;
+		assigned-clock-parents = <&k3_clks 67 2>;
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 68 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 68 1>, <&k3_clks 321 0>;
+		assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 321 1>;
+		power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 69 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 69 1>;
+		assigned-clock-parents = <&k3_clks 69 2>;
+		power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 70 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 70 1>, <&k3_clks 322 0>;
+		assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 322 1>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j7200-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7200-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7200-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <656>, <657>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 000000000..6ffaf85fa
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	mcu_timer0: timer@40400000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 1>;
+		assigned-clock-parents = <&k3_clks 35 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer1: timer@40410000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 71 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 71 1>, <&k3_clks 308 0>;
+		assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 308 1>;
+		power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer2: timer@40420000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 72 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 72 1>;
+		assigned-clock-parents = <&k3_clks 72 2>;
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer3: timer@40430000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 73 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 73 1>, <&k3_clks 309 0>;
+		assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 309 1>;
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer4: timer@40440000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 74 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 74 1>;
+		assigned-clock-parents = <&k3_clks 74 2>;
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer5: timer@40450000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 75 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 75 1>, <&k3_clks 310 0>;
+		assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 310 1>;
+		power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer6: timer@40460000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 76 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 76 1>;
+		assigned-clock-parents = <&k3_clks 76 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer7: timer@40470000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 77 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 77 1>, <&k3_clks 311 0>;
+		assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 311 1>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer8: timer@40480000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 78 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 78 1>;
+		assigned-clock-parents = <&k3_clks 78 2>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_timer9: timer@40490000 {
+		status = "reserved";
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 79 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 79 1>, <&k3_clks 312 0>;
+		assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 312 1>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x40f00000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000F>;
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000F>;
+		status = "reserved";
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x34>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0xec>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@4301c174 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c174 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 2>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <85>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <85>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x2b800000 0x00 0x400000>,
+			      <0x00 0x2b000000 0x00 0x400000>,
+			      <0x00 0x28590000 0x00 0x100>,
+			      <0x00 0x2a500000 0x00 0x40000>,
+			      <0x00 0x28440000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg",
+				    "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x00 0x285c0000 0x00 0x100>,
+			      <0x00 0x2a800000 0x00 0x40000>,
+			      <0x00 0x2aa00000 0x00 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x46000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 18 21>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 21>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 1>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 1>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 1>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 274 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 275 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 0>;
+		status = "disabled";
+	};
+
+	fss: syscon@47000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: hbmc-mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+		};
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+			      <0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j7200-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x41000000 0x00010000>,
+			      <0x41010000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <250>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 250 1>;
+			firmware-name = "j7200-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j7200-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <251>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 251 1>;
+			firmware-name = "j7200-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_crypto: crypto@40900000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x40900000 0x00 0x1200>;
+		power-domains = <&k3_pds 265 TI_SCI_PD_SHARED>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
+		dmas = <&mcu_udmap 0xf501>, <&mcu_udmap 0x7502>,
+		       <&mcu_udmap 0x7503>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@40910000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x40910000 0x00 0x7d>;
+			interrupts = <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled"; /* Used by OP-TEE */
+		};
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
new file mode 100644
index 000000000..5a300d4c8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x00 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@a4000000 {
+			reg = <0x00 0xa4000000 0x00 0x00800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+			pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
+&hbmc {
+	/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+	 * appropriate node based on board detection
+	 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x00 0x00 0x4000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "hbmc.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "hbmc.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "hbmc.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "hbmc.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "hbmc.rootfs";
+				reg = <0x800000 0x3800000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
+				  "GPIO_LIN_EN", "CAN_STB";
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "ospi.tispl";
+				reg = <0x100000 0x200000>;
+			};
+
+			partition@300000 {
+				label = "ospi.u-boot";
+				reg = <0x300000 0x400000>;
+			};
+
+			partition@700000 {
+				label = "ospi.env";
+				reg = <0x700000 0x40000>;
+			};
+
+			partition@740000 {
+				label = "ospi.env.backup";
+				reg = <0x740000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
new file mode 100644
index 000000000..e7e3a643a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	mcu_thermal: mcu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			wkup_crit: wkup-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	mpu_thermal: mpu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			mpu_crit: mpu-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main_thermal: main-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			c7x_crit: c7x-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
new file mode 100644
index 000000000..ef73e6d7e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 J7200 SoC";
+	compatible = "ti,j7200";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
+		};
+	};
+
+	#include "k3-j7200-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
new file mode 100644
index 000000000..2f954729f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -0,0 +1,993 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * https://beagleboard.org/ai-64
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
+ * Copyright (C) 2022 Robert Nelson, BeagleBoard.org Foundation
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+/ {
+	compatible = "beagle,j721e-beagleboneai64", "ti,j721e";
+	model = "BeagleBoard.org BeagleBone AI-64";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial2 = &main_uart0;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &main_i2c6;
+		i2c2 = &main_i2c2;
+		i2c3 = &main_i2c4;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_pwr_pins_default>;
+
+		button-1 {
+			label = "BOOT";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-2 {
+			label = "POWER";
+			linux,code = <KEY_POWER>;
+			gpios = <&wkup_gpio0 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_default>;
+
+		led-0 {
+			gpios = <&main_gpio0 96 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			gpios = <&main_gpio0 95 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			gpios = <&main_gpio0 97 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_CPU;
+			linux,default-trigger = "cpu";
+		};
+
+		led-3 {
+			gpios = <&main_gpio0 110 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			linux,default-trigger = "mmc1";
+		};
+
+		led-4 {
+			gpios = <&main_gpio0 109 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_WLAN;
+			default-state = "off";
+		};
+	};
+
+	evm_12v0: regulator-0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-1 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-2 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pwr_en_pins_default>;
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&main_gpio0 82 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: regulator-4 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp_pwr_3v3: regulator-5 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp0_3v3_en_pins_default>;
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; /* DP0_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	led_pins_default: led-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x184, PIN_INPUT, 7) /* (T23) RGMII5_RD0.GPIO0_96 */
+			J721E_IOPAD(0x180, PIN_INPUT, 7) /* (R23) RGMII5_RD1.GPIO0_95 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x1bc, PIN_INPUT, 7) /* (V24) MDIO0_MDC.GPIO0_110 */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 7) /* (V26) MDIO0_MDIO.GPIO0_109 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	sd_pwr_en_pins_default: sd-pwr-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 - USBC_DIR */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, INPUT_DISABLE, 1) /* (U6) USB0_DRVVBUS.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_3v3_en_pins_default:dp0-3v3-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xc8, PIN_INPUT, 7) /* (AE26) PRG0_PRU0_GPO6.GPIO0_49 */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* (Y4) SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c2_pins_default: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT_PULLUP, 4) /* (W5) MCAN0_RX.I2C2_SCL */
+			J721E_IOPAD(0x20c, PIN_INPUT_PULLUP, 4) /* (W6) MCAN0_TX.I2C2_SDA */
+			J721E_IOPAD(0x138, PIN_INPUT, 7) /* (AE25) PRG0_PRU1_GPO14.GPIO0_77 */
+			J721E_IOPAD(0x13c, PIN_INPUT, 7) /* (AF29) PRG0_PRU1_GPO15.GPIO0_78 */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1e0, PIN_INPUT_PULLUP, 2) /* (Y5) SPI1_D0.I2C4_SCL */
+			J721E_IOPAD(0x1dc, PIN_INPUT_PULLUP, 2) /* (Y1) SPI1_CLK.I2C4_SDA */
+			J721E_IOPAD(0x30, PIN_INPUT, 7) /* (AF24) PRG1_PRU0_GPO11.GPIO0_12 */
+			J721E_IOPAD(0x34, PIN_INPUT, 7) /* (AJ24) PRG1_PRU0_GPO12.GPIO0_13 */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+			J721E_IOPAD(0x74, PIN_INPUT, 7) /* (AC21) PRG1_PRU1_GPO7.GPIO0_28 */
+			J721E_IOPAD(0xa4, PIN_INPUT, 7) /* (AH22) PRG1_PRU1_GPO19.GPIO0_40 */
+		>;
+	};
+
+	csi0_gpio_pins_default: csi0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+		>;
+	};
+
+	csi1_gpio_pins_default: csi1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1b0, PIN_INPUT_PULLDOWN, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+		>;
+	};
+
+	pcie1_rst_pins_default: pcie1-rst-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x5c, PIN_INPUT, 7) /* (AG23) PRG1_PRU1_GPO1.GPIO0_22 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	eeprom_wp_pins_default: eeprom-wp-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_OUTPUT_PULLUP, 7) /* (G24) WKUP_GPIO0_5 */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x130, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN0 */
+			J721E_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (K26) MCU_ADC0_AIN1 */
+			J721E_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (K28) MCU_ADC0_AIN2 */
+			J721E_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (L28) MCU_ADC0_AIN3 */
+			J721E_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN4 */
+			J721E_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (K27) MCU_ADC0_AIN5 */
+			J721E_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (K29) MCU_ADC0_AIN6 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (N23) MCU_ADC1_AIN0 */
+		>;
+	};
+
+	mikro_bus_pins_default: mikro-bus-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x108, PIN_INPUT, 7) /* SDAPULLEN (E26) PMIC_POWER_EN0.WKUP_GPIO0_66 */
+			J721E_WKUP_IOPAD(0xd4, PIN_INPUT, 7) /* SDA (G26) WKUP_GPIO0_9.MCU_I2C1_SDA */
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 7) /* SDA (D25) MCU_I3C0_SDA.WKUP_GPIO0_61 */
+			J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* SCL (G27) WKUP_GPIO0_8.MCU_I2C1_SCL */
+			J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 7) /* SCL (D26) MCU_I3C0_SCL.WKUP_GPIO0_60 */
+
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* MOSI (F28) WKUP_GPIO0_2.MCU_SPI1_D1 */
+			J721E_WKUP_IOPAD(0xb4, PIN_INPUT, 7) /* MISO (F25) WKUP_GPIO0_1.MCU_SPI1_D0 */
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* CLK (F26) WKUP_GPIO0_0.MCU_SPI1_CLK */
+			J721E_WKUP_IOPAD(0xbc, PIN_INPUT, 7) /* CS (F27) WKUP_GPIO0_3.MCU_SPI1_CS0 */
+
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 7) /* RX (G22) MCU_OSPI1_D1.WKUP_GPIO0_33 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 7) /* TX (D23) MCU_OSPI1_D2.WKUP_GPIO0_34 */
+
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 7) /* INT (C23) MCU_OSPI1_D3.WKUP_GPIO0_35 */
+			J721E_WKUP_IOPAD(0x54, PIN_INPUT, 7) /* RST (E22) MCU_OSPI1_CSn1.WKUP_GPIO0_37 */
+			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* PWM (H27) WKUP_GPIO0_11 */
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 7) /* AN (C29) MCU_MCAN0_RX.WKUP_GPIO0_59 */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	sw_pwr_pins_default: sw-pwr-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc0, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_4 */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_usbss1_pins_default: mcu-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x3c, PIN_OUTPUT_PULLUP, 5) /* (A23) MCU_OSPI1_LBCLKO.WKUP_GPIO0_30 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by TIFS firmware. */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD Card */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	/* BBB Header: P9.19 and P9.20 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c2_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c4 {
+	/* BBB Header: P9.24 and P9.26 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <100000>;
+};
+
+&main_i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c6 {
+	/* BBB Header: P9.17 and P9.18 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eeprom_wp_pins_default>;
+	};
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_adc0_pins_default>, <&mcu_adc1_pins_default>,
+		    <&mikro_bus_pins_default>;
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_gpio_pins_default>, <&csi0_gpio_pins_default>;
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_IP4_UNUSED>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_LOW>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes2 {
+	serdes2_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz2 2>;
+	};
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>, <&mcu_usbss1_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes2_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&tscadc0 {
+	status = "okay";
+	/* BBB Header: P9.39, P9.40, P9.37, P9.38, P9.33, P9.36, P9.35 */
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	/* MCU mikroBUS Header J10.1 - MCU_ADC1_AIN0 */
+	adc {
+		ti,adc-channels = <0>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
+			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
+			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
+			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&dss_ports {
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_rst_pins_default>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+	max-link-speed = <3>;
+	reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_HIGH>;
+};
+
+&ufs_wrapper {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
new file mode 100644
index 000000000..fe5207ac7
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -0,0 +1,976 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721e-som-p0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+/ {
+	compatible = "ti,j721e-evm", "ti,j721e";
+	model = "Texas Instruments J721e EVM";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial6 = &main_uart4;
+		ethernet0 = &cpsw_port1;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>;
+
+		sw10: switch-10 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		sw11: switch-11 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: gpio-regulator-TLV71033 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tlv71033";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 117 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	sound0: sound-0 {
+		compatible = "ti,j721e-cpb-audio";
+		model = "j721e-cpb";
+
+		ti,cpb-mcasp = <&mcasp10>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 184 1>,
+			 <&k3_clks 184 2>, <&k3_clks 184 4>,
+			 <&k3_clks 157 371>,
+			 <&k3_clks 157 400>, <&k3_clks 157 401>;
+		clock-names = "cpb-mcasp-auxclk",
+			      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+			      "cpb-codec-scki",
+			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+	};
+
+	transceiver1: can-phy0 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy1 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy2 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver4: can-phy3 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_mcan2_gpio_pins_default>;
+		standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
+	};
+
+	dp_pwr_3v3: regulator-dp-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */
+			J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
+			J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
+		>;
+	};
+
+	main_uart2_pins_default: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */
+			J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */
+		>;
+	};
+
+	main_uart4_pins_default: main-uart4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */
+			J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */
+		>;
+	};
+
+	sw10_button_pins_default: sw10-button-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+			J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_i2c6_pins_default: main-i2c6-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */
+			J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */
+		>;
+	};
+
+	mcasp10_pins_default: mcasp10-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
+			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
+			J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
+			J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
+			J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
+			J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
+		>;
+	};
+
+	audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
+		>;
+	};
+
+	main_mcan0_pins_default: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */
+			J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */
+		>;
+	};
+
+	main_mcan2_pins_default: main-mcan2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */
+			J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */
+		>;
+	};
+
+	main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	sw11_button_pins_default: sw11-button-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */
+			J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */
+			J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */
+			J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */
+			J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */
+			J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */
+			J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */
+			J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */
+			J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */
+			J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */
+			J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */
+		>;
+	};
+
+	wkup_gpio_pins_default: wkup-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart2_pins_default>;
+};
+
+&main_uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart4_pins_default>;
+};
+
+&wkup_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_gpio_pins_default>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&main_gpio1 {
+	status = "okay";
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD/MMC */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>;
+	ti,usb2-only;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+};
+
+&ospi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "qspi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "qspi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "qspi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "qspi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition@6a0000 {
+				label = "qspi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition@6c0000 {
+				label = "qspi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "qspi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fe0000 {
+				label = "qspi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&tscadc0 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		p09-hog {
+			/* P11 - MCASP/TRACE_MUX_S0 */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "MCASP/TRACE_MUX_S0";
+		};
+
+		p10-hog {
+			/* P12 - MCASP/TRACE_MUX_S1 */
+			gpio-hog;
+			gpios = <10 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP/TRACE_MUX_S1";
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_i2c1_exp4_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK2 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audi_ext_refclk2_pins_default>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	exp3: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+
+		#sound-dai-cells = <1>;
+
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+
+		/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
+		clocks = <&k3_clks 157 371>;
+		clock-names = "scki";
+
+		/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
+		assigned-clocks = <&k3_clks 157 371>;
+		assigned-clock-parents = <&k3_clks 157 400>;
+		assigned-clock-rates = <24576000>; /* for 48KHz */
+
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
+};
+
+&main_i2c6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c6_pins_default>;
+	clock-frequency = <400000>;
+
+	exp5: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	/*
+	 * These clock assignments are chosen to enable the following outputs:
+	 *
+	 * VP0 - DisplayPort SST
+	 * VP1 - DPI0
+	 * VP2 - DSI
+	 * VP3 - DPI1
+	 */
+
+	assigned-clocks = <&k3_clks 152 1>,
+			  <&k3_clks 152 4>,
+			  <&k3_clks 152 9>,
+			  <&k3_clks 152 13>;
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* PLL19_HSDIV0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
+};
+
+&dss_ports {
+	port {
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&mcasp10 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp10_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 1 1 1
+		2 2 2 0
+	>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+};
+
+&cmn_refclk1 {
+	clock-frequency = <100000000>;
+};
+
+&wiz0_pll1_refclk {
+	assigned-clocks = <&wiz0_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz0_refclk_dig {
+	assigned-clocks = <&wiz0_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_pll1_refclk {
+	assigned-clocks = <&wiz1_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz1_refclk_dig {
+	assigned-clocks = <&wiz1_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_pll1_refclk {
+	assigned-clocks = <&wiz2_pll1_refclk>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&wiz2_refclk_dig {
+	assigned-clocks = <&wiz2_refclk_dig>;
+	assigned-clock-parents = <&cmn_refclk1>;
+};
+
+&serdes0 {
+	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
+	assigned-clock-parents = <&wiz0_pll1_refclk>;
+
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>;
+	assigned-clock-parents = <&wiz1_pll1_refclk>;
+
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&serdes2 {
+	assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>;
+	assigned-clock-parents = <&wiz2_pll1_refclk>;
+
+	serdes2_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz2 1>, <&serdes_wiz2 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&pcie0_rc {
+	status = "okay";
+	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&pcie2_rc {
+	status = "okay";
+	reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes2_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&main_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan0_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan2_pins_default>;
+	phys = <&transceiver4>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
new file mode 100644
index 000000000..6a7d37575
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-gesi-exp-board.dtso
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW9G in RGMII mode using J7 GESI EXP BRD board with
+ * J721E board.
+ *
+ * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_default_pins
+		     &rgmii2_default_pins
+		     &rgmii3_default_pins
+		     &rgmii4_default_pins>;
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy12>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy15>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy0>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy3>;
+	phy-mode = "rgmii-rxid";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw9g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_default_pins>;
+	bus_freq = <1000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw9g_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+	cpsw9g_phy3: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+	cpsw9g_phy12: ethernet-phy@12 {
+		reg = <12>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+	cpsw9g_phy15: ethernet-phy@15 {
+		reg = <15>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&exp1 {
+	p15-hog {
+		/* P15 - EXP_MUX2 */
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "EXP_MUX2";
+	};
+
+	p16-hog {
+		/* P16 - EXP_MUX3 */
+		gpio-hog;
+		gpios = <14 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "EXP_MUX3";
+	};
+};
+
+&main_pmx0 {
+	mdio0_default_pins: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_default_pins: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x4, PIN_INPUT, 4) /* (AC23) PRG1_PRU0_GPO0.RGMII1_RD0 */
+			J721E_IOPAD(0x8, PIN_INPUT, 4) /* (AG22) PRG1_PRU0_GPO1.RGMII1_RD1 */
+			J721E_IOPAD(0xc, PIN_INPUT, 4) /* (AF22) PRG1_PRU0_GPO2.RGMII1_RD2 */
+			J721E_IOPAD(0x10, PIN_INPUT, 4) /* (AJ23) PRG1_PRU0_GPO3.RGMII1_RD3 */
+			J721E_IOPAD(0x1c, PIN_INPUT, 4) /* (AD22) PRG1_PRU0_GPO6.RGMII1_RXC */
+			J721E_IOPAD(0x14, PIN_INPUT, 4) /* (AH23) PRG1_PRU0_GPO4.RGMII1_RX_CTL */
+			J721E_IOPAD(0x30, PIN_OUTPUT, 4) /* (AF24) PRG1_PRU0_GPO11.RGMII1_TD0 */
+			J721E_IOPAD(0x34, PIN_OUTPUT, 4) /* (AJ24) PRG1_PRU0_GPO12.RGMII1_TD1 */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 4) /* (AG24) PRG1_PRU0_GPO13.RGMII1_TD2 */
+			J721E_IOPAD(0x3c, PIN_OUTPUT, 4) /* (AD24) PRG1_PRU0_GPO14.RGMII1_TD3 */
+			J721E_IOPAD(0x44, PIN_OUTPUT, 4) /* (AE24) PRG1_PRU0_GPO16.RGMII1_TXC */
+			J721E_IOPAD(0x40, PIN_OUTPUT, 4) /* (AC24) PRG1_PRU0_GPO15.RGMII1_TX_CTL */
+		>;
+	};
+
+	rgmii2_default_pins: rgmii2-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x58, PIN_INPUT, 4) /* (AE22) PRG1_PRU1_GPO0.RGMII2_RD0 */
+			J721E_IOPAD(0x5c, PIN_INPUT, 4) /* (AG23) PRG1_PRU1_GPO1.RGMII2_RD1 */
+			J721E_IOPAD(0x60, PIN_INPUT, 4) /* (AF23) PRG1_PRU1_GPO2.RGMII2_RD2 */
+			J721E_IOPAD(0x64, PIN_INPUT, 4) /* (AD23) PRG1_PRU1_GPO3.RGMII2_RD3 */
+			J721E_IOPAD(0x70, PIN_INPUT, 4) /* (AE23) PRG1_PRU1_GPO6.RGMII2_RXC */
+			J721E_IOPAD(0x68, PIN_INPUT, 4) /* (AH24) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
+			J721E_IOPAD(0x84, PIN_OUTPUT, 4) /* (AJ25) PRG1_PRU1_GPO11.RGMII2_TD0 */
+			J721E_IOPAD(0x88, PIN_OUTPUT, 4) /* (AH25) PRG1_PRU1_GPO12.RGMII2_TD1 */
+			J721E_IOPAD(0x8c, PIN_OUTPUT, 4) /* (AG25) PRG1_PRU1_GPO13.RGMII2_TD2 */
+			J721E_IOPAD(0x90, PIN_OUTPUT, 4) /* (AH26) PRG1_PRU1_GPO14.RGMII2_TD3 */
+			J721E_IOPAD(0x98, PIN_OUTPUT, 4) /* (AJ26) PRG1_PRU1_GPO16.RGMII2_TXC */
+			J721E_IOPAD(0x94, PIN_OUTPUT, 4) /* (AJ27) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
+		>;
+	};
+
+	rgmii3_default_pins: rgmii3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 4) /* (AF28) PRG0_PRU0_GPO0.RGMII3_RD0 */
+			J721E_IOPAD(0xb4, PIN_INPUT, 4) /* (AE28) PRG0_PRU0_GPO1.RGMII3_RD1 */
+			J721E_IOPAD(0xb8, PIN_INPUT, 4) /* (AE27) PRG0_PRU0_GPO2.RGMII3_RD2 */
+			J721E_IOPAD(0xbc, PIN_INPUT, 4) /* (AD26) PRG0_PRU0_GPO3.RGMII3_RD3 */
+			J721E_IOPAD(0xc8, PIN_INPUT, 4) /* (AE26) PRG0_PRU0_GPO6.RGMII3_RXC */
+			J721E_IOPAD(0xc0, PIN_INPUT, 4) /* (AD25) PRG0_PRU0_GPO4.RGMII3_RX_CTL */
+			J721E_IOPAD(0xdc, PIN_OUTPUT, 4) /* (AJ28) PRG0_PRU0_GPO11.RGMII3_TD0 */
+			J721E_IOPAD(0xe0, PIN_OUTPUT, 4) /* (AH27) PRG0_PRU0_GPO12.RGMII3_TD1 */
+			J721E_IOPAD(0xe4, PIN_OUTPUT, 4) /* (AH29) PRG0_PRU0_GPO13.RGMII3_TD2 */
+			J721E_IOPAD(0xe8, PIN_OUTPUT, 4) /* (AG28) PRG0_PRU0_GPO14.RGMII3_TD3 */
+			J721E_IOPAD(0xf0, PIN_OUTPUT, 4) /* (AH28) PRG0_PRU0_GPO16.RGMII3_TXC */
+			J721E_IOPAD(0xec, PIN_OUTPUT, 4) /* (AG27) PRG0_PRU0_GPO15.RGMII3_TX_CTL */
+		>;
+	};
+
+	rgmii4_default_pins: rgmii4-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x100, PIN_INPUT, 4) /* (AE29) PRG0_PRU1_GPO0.RGMII4_RD0 */
+			J721E_IOPAD(0x104, PIN_INPUT, 4) /* (AD28) PRG0_PRU1_GPO1.RGMII4_RD1 */
+			J721E_IOPAD(0x108, PIN_INPUT, 4) /* (AD27) PRG0_PRU1_GPO2.RGMII4_RD2 */
+			J721E_IOPAD(0x10c, PIN_INPUT, 4) /* (AC25) PRG0_PRU1_GPO3.RGMII4_RD3 */
+			J721E_IOPAD(0x118, PIN_INPUT, 4) /* (AC26) PRG0_PRU1_GPO6.RGMII4_RXC */
+			J721E_IOPAD(0x110, PIN_INPUT, 4) /* (AD29) PRG0_PRU1_GPO4.RGMII4_RX_CTL */
+			J721E_IOPAD(0x12c, PIN_OUTPUT, 4) /* (AG26) PRG0_PRU1_GPO11.RGMII4_TD0 */
+			J721E_IOPAD(0x130, PIN_OUTPUT, 4) /* (AF27) PRG0_PRU1_GPO12.RGMII4_TD1 */
+			J721E_IOPAD(0x134, PIN_OUTPUT, 4) /* (AF26) PRG0_PRU1_GPO13.RGMII4_TD2 */
+			J721E_IOPAD(0x138, PIN_OUTPUT, 4) /* (AE25) PRG0_PRU1_GPO14.RGMII4_TD3 */
+			J721E_IOPAD(0x140, PIN_OUTPUT, 4) /* (AG29) PRG0_PRU1_GPO16.RGMII4_TXC */
+			J721E_IOPAD(0x13c, PIN_OUTPUT, 4) /* (AF29) PRG0_PRU1_GPO15.RGMII4_TX_CTL */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso
new file mode 100644
index 000000000..d4c51ffc3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for CPSW9G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
+ * J721E board.
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-cadence.h>
+
+#include "k3-pinctrl.h"
+#include "k3-serdes.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
+		ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
+		ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
+		ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
+	};
+};
+
+&cpsw0 {
+	status = "okay";
+};
+
+&cpsw0_port1 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy0>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 1>;
+};
+
+&cpsw0_port2 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy1>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 2>;
+};
+
+&cpsw0_port3 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy2>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 3>;
+};
+
+&cpsw0_port4 {
+	status = "okay";
+	phy-handle = <&cpsw9g_phy3>;
+	phy-mode = "qsgmii";
+	mac-address = [00 00 00 00 00 00];
+	phys = <&cpsw0_phy_gmii_sel 4>;
+};
+
+&cpsw9g_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio0_pins_default>;
+	reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
+	reset-post-delay-us = <120000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpsw9g_phy0: ethernet-phy@17 {
+		reg = <17>;
+	};
+	cpsw9g_phy1: ethernet-phy@16 {
+		reg = <16>;
+	};
+	cpsw9g_phy2: ethernet-phy@18 {
+		reg = <18>;
+	};
+	cpsw9g_phy3: ethernet-phy@19 {
+		reg = <19>;
+	};
+};
+
+&exp2 {
+	qsgmii-line-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "qsgmii-pwrdn-line";
+	};
+};
+
+&main_pmx0 {
+	mdio0_pins_default: mdio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1bc, PIN_OUTPUT, 0) /* (V24) MDIO0_MDC */
+			J721E_IOPAD(0x1b8, PIN_INPUT, 0) /* (V26) MDIO0_MDIO */
+		>;
+	};
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes0 {
+	status = "okay";
+
+	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>;
+	assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	serdes0_qsgmii_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_QSGMII>;
+		resets = <&serdes_wiz0 2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
new file mode 100644
index 000000000..f6c7e1614
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -0,0 +1,2741 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
+#include <dt-bindings/mux/mux.h>
+
+#include "k3-serdes.h"
+
+/ {
+	cmn_refclk: clock-cmnrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	cmn_refclk1: clock-cmnrefclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: mux-controller@4080 {
+			compatible = "mmio-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+					/* SERDES4 lane0/1/2/3 select */
+			idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
+				      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+				      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
+				      <MUX_IDLE_AS_IS>, <J721E_SERDES3_LANE1_USB3_0>,
+				      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+				      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+		};
+
+		cpsw0_phy_gmii_sel: phy@4044 {
+			compatible = "ti,j721e-cpsw9g-phy-gmii-sel";
+			ti,qsgmii-main-ports = <2>, <2>;
+			reg = <0x4044 0x20>;
+			#phy-cells = <1>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+		};
+
+		ehrpwm_tbclk: clock-controller@4140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x4140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3000000 0x00 0x100>;
+		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 83 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3010000 0x00 0x100>;
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 84 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3020000 0x00 0x100>;
+		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 85 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3030000 0x00 0x100>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 86 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3040000 0x00 0x100>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 87 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3050000 0x00 0x100>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 88 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <131>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <199>;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x0 0x310e0000 0x0 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <213>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			#interrupt-cells = <0>;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu0: iommu@36600000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x36600000 0x0 0x100000>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq", "gerror";
+			#iommu-cells = <1>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>,
+			      <0x0 0x31080000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <211>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x100000>,
+			      <0x0 0x35000000 0x0 0x100000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <212>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 201 1>;
+			clock-names = "cpts";
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	cpsw0: ethernet@c000000 {
+		compatible = "ti,j721e-cpswxg-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xc000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x0c000000 0x0 0x200000>;
+		clocks = <&k3_clks 19 89>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 19 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xca00>,
+		       <&main_udmap 0xca01>,
+		       <&main_udmap 0xca02>,
+		       <&main_udmap 0xca03>,
+		       <&main_udmap 0xca04>,
+		       <&main_udmap 0xca05>,
+		       <&main_udmap 0xca06>,
+		       <&main_udmap 0xca07>,
+		       <&main_udmap 0x4a00>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cpsw0_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				status = "disabled";
+			};
+
+			cpsw0_port2: port@2 {
+				reg = <2>;
+				ti,mac-only;
+				label = "port2";
+				status = "disabled";
+			};
+
+			cpsw0_port3: port@3 {
+				reg = <3>;
+				ti,mac-only;
+				label = "port3";
+				status = "disabled";
+			};
+
+			cpsw0_port4: port@4 {
+				reg = <4>;
+				ti,mac-only;
+				label = "port4";
+				status = "disabled";
+			};
+
+			cpsw0_port5: port@5 {
+				reg = <5>;
+				ti,mac-only;
+				label = "port5";
+				status = "disabled";
+			};
+
+			cpsw0_port6: port@6 {
+				reg = <6>;
+				ti,mac-only;
+				label = "port6";
+				status = "disabled";
+			};
+
+			cpsw0_port7: port@7 {
+				reg = <7>;
+				ti,mac-only;
+				label = "port7";
+				status = "disabled";
+			};
+
+			cpsw0_port8: port@8 {
+				reg = <8>;
+				ti,mac-only;
+				label = "port8";
+				status = "disabled";
+			};
+		};
+
+		cpsw9g_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 19 89>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 19 16>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x0 0x4e00000 0x0 0x1200>;
+		power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
+
+		dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+				<&main_udmap 0x4001>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x0 0x4e10000 0x0 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	serdes_wiz0: wiz@5000000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+		assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 11>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 0>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz0_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5000000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz0 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>,
+				 <&wiz0_pll0_refclk>, <&wiz0_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	serdes_wiz1: wiz@5010000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+		assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+		wiz1_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 293 13>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 293 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 293 0>;
+		};
+
+		wiz1_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz1_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz1_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes1: serdes@5010000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5010000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz1 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>,
+				 <&wiz1_pll0_refclk>, <&wiz1_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+		assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+		wiz2_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 294 11>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 294 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 294 0>;
+		};
+
+		wiz2_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz2_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz2_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5020000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz2 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>,
+				 <&wiz2_pll0_refclk>, <&wiz2_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	serdes_wiz3: wiz@5030000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+		assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+		wiz3_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 295 9>, <&cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 295 0>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 295 0>;
+		};
+
+		wiz3_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz3_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz3_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes3: serdes@5030000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5030000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			resets = <&serdes_wiz3 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>,
+				 <&wiz3_pll0_refclk>, <&wiz3_pll1_refclk>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div",
+				      "pll0_refclk", "pll1_refclk";
+		};
+	};
+
+	pcie0_rc: pcie@2900000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x10001000 0x0 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x10011000 0x0 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000 0x0 0x18001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000 0x0 0x18011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie2_rc: pcie@2920000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02920000 0x00 0x1000>,
+		      <0x00 0x02927000 0x00 0x400>,
+		      <0x00 0x0e000000 0x00 0x00800000>,
+		      <0x44 0x00000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 241 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x20000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x00001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x00011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	pcie3_rc: pcie@2930000 {
+		compatible = "ti,j721e-pcie-host";
+		reg = <0x00 0x02930000 0x00 0x1000>,
+		      <0x00 0x02937000 0x00 0x400>,
+		      <0x00 0x0e800000 0x00 0x00800000>,
+		      <0x44 0x10000000 0x00 0x00001000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 242 1>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb00d>;
+		msi-map = <0x0 &gic_its 0x30000 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x00001000 0x44 0x10001000 0x0 0x0010000>,
+			 <0x02000000 0x0 0x00011000 0x44 0x10011000 0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		status = "disabled";
+	};
+
+	serdes_wiz4: wiz@5050000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 297 9>;
+		assigned-clock-parents = <&k3_clks 297 10>;
+		assigned-clock-rates = <19200000>;
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x05050000 0x00 0x05050000 0x010000>,
+			<0x0a030a00 0x00 0x0a030a00 0x40>;
+
+		serdes4: serdes@5050000 {
+			/*
+			 * Note: we also map DPTX PHY registers as the Torrent
+			 * needs to manage those.
+			 */
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05050000 0x010000>,
+			      <0x0a030a00 0x40>; /* DPTX PHY */
+			reg-names = "torrent_phy", "dptx_phy";
+
+			resets = <&serdes_wiz4 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>;
+			clock-names = "refclk";
+			assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 297 9>,
+						 <&k3_clks 297 9>,
+						 <&k3_clks 297 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 49 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 49 1>;
+		assigned-clock-parents = <&k3_clks 49 2>;
+		power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 50 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 50 1>, <&k3_clks 327 0>;
+		assigned-clock-parents = <&k3_clks 50 2>, <&k3_clks 327 1>;
+		power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 51 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 51 1>;
+		assigned-clock-parents = <&k3_clks 51 2>;
+		power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 52 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 52 1>, <&k3_clks 328 0>;
+		assigned-clock-parents = <&k3_clks 52 2>, <&k3_clks 328 1>;
+		power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 53 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 53 1>;
+		assigned-clock-parents = <&k3_clks 53 2>;
+		power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 54 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 54 1>, <&k3_clks 329 0>;
+		assigned-clock-parents = <&k3_clks 54 2>, <&k3_clks 329 1>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 55 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 55 1>;
+		assigned-clock-parents = <&k3_clks 55 2>;
+		power-domains = <&k3_pds 55 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 57 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 57 1>, <&k3_clks 330 0>;
+		assigned-clock-parents = <&k3_clks 57 2>, <&k3_clks 330 1>;
+		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 58 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 58 1>;
+		assigned-clock-parents = <&k3_clks 58 2>;
+		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 59 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 59 1>, <&k3_clks 331 0>;
+		assigned-clock-parents = <&k3_clks 59 2>, <&k3_clks 331 1>;
+		power-domains = <&k3_pds 59 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 60 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 60 1>;
+		assigned-clock-parents = <&k3_clks 60 2>;
+		power-domains = <&k3_pds 60 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 62 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 62 1>, <&k3_clks 332 0>;
+		assigned-clock-parents = <&k3_clks 62 2>, <&k3_clks 332 1>;
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 63 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 63 1>;
+		assigned-clock-parents = <&k3_clks 63 2>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 64 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 64 1>, <&k3_clks 333 0>;
+		assigned-clock-parents = <&k3_clks 64 2>, <&k3_clks 333 1>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 65 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 65 1>;
+		assigned-clock-parents = <&k3_clks 65 2>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 66 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 66 1>, <&k3_clks 334 0>;
+		assigned-clock-parents = <&k3_clks 66 2>, <&k3_clks 334 1>;
+		power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 67 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 67 1>;
+		assigned-clock-parents = <&k3_clks 67 2>;
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 68 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 68 1>, <&k3_clks 335 0>;
+		assigned-clock-parents = <&k3_clks 68 2>, <&k3_clks 335 1>;
+		power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 69 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 69 1>;
+		assigned-clock-parents = <&k3_clks 69 2>;
+		power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 70 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 70 1>, <&k3_clks 336 0>;
+		assigned-clock-parents = <&k3_clks 70 2>, <&k3_clks 336 1>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <256>, <257>, <258>, <259>,
+			     <260>, <261>, <262>, <263>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <288>, <289>, <290>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00610000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <264>, <265>, <266>, <267>,
+			     <268>, <269>, <270>, <271>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio3: gpio@611000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00611000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <292>, <293>, <294>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 108 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00620000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <272>, <273>, <274>, <275>,
+			     <276>, <277>, <278>, <279>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 109 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio5: gpio@621000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00621000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <296>, <297>, <298>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 110 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00630000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <280>, <281>, <282>, <283>,
+			     <284>, <285>, <286>, <287>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <128>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio7: gpio@631000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00631000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <300>, <301>, <302>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <36>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 91 0>, <&k3_clks 91 1>;
+		assigned-clocks = <&k3_clks 91 1>;
+		assigned-clock-parents = <&k3_clks 91 2>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		mmc-ddr-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 92 5>, <&k3_clks 92 0>;
+		assigned-clocks = <&k3_clks 92 0>;
+		assigned-clock-parents = <&k3_clks 92 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,trm-icp = <0x8>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
+		status = "disabled";
+	};
+
+	main_sdhci2: mmc@4f98000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_ahb", "clk_xin";
+		clocks = <&k3_clks 93 5>, <&k3_clks 93 0>;
+		assigned-clocks = <&k3_clks 93 0>;
+		assigned-clock-parents = <&k3_clks 93 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
+		ti,trm-icp = <0x8>;
+		ti,clkbuf-sel = <0x7>;
+		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
+		status = "disabled";
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4104000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 288 15>, <&k3_clks 288 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 288 15>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6000000 0x00 0x10000>,
+			      <0x00 0x6010000 0x00 0x10000>,
+			      <0x00 0x6020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	usbss1: cdns-usb@4114000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x4114000 0x00 0x100>;
+		dma-coherent;
+		power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 289 15>, <&k3_clks 289 3>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 289 15>;	/* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		usb1: usb@6400000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x6400000 0x00 0x10000>,
+			      <0x00 0x6410000 0x00 0x10000>,
+			      <0x00 0x6420000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,	/* irq.0 */
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,	/* irq.6 */
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;	/* otgirq.0 */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 0>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 0>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 0>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 0>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 0>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 0>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 0>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x0 0x4e80000 0x0 0x100>;
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 277 1>;
+		assigned-clocks = <&k3_clks 277 1>;
+		assigned-clock-parents = <&k3_clks 277 4>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x0 0x4e84000 0x0 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+			clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	mhdp: dp-bridge@a000000 {
+		compatible = "ti,j721e-mhdp8546";
+		/*
+		 * Note: we do not map DPTX PHY area, as that is handled by
+		 * the PHY driver.
+		 */
+		reg = <0x00 0x0a000000 0x00 0x030a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */
+		      <0x00 0x04f40000 0x00 0x20>;    /* DSS_EDP0_INTG_CFG_VP */
+		reg-names = "mhdptx", "j721e-intg";
+
+		clocks = <&k3_clks 151 36>;
+
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+
+		dp0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+			    reg = <0>;
+			};
+
+			port@4 {
+			    reg = <4>;
+			};
+		};
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg =
+			<0x00 0x04a00000 0x00 0x10000>, /* common_m */
+			<0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+			<0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+			<0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+
+			<0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+			<0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+			<0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+			<0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+
+			<0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+			<0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+			<0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+			<0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+
+			<0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+			<0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
+			<0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
+			<0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+			<0x00 0x04af0000 0x00 0x10000>; /* wb */
+
+		reg-names = "common_m", "common_s0",
+			"common_s1", "common_s2",
+			"vidl1", "vidl2","vid1","vid2",
+			"ovr1", "ovr2", "ovr3", "ovr4",
+			"vp1", "vp2", "vp3", "vp4",
+			"wb";
+
+		clocks = <&k3_clks 152 0>,
+			 <&k3_clks 152 1>,
+			 <&k3_clks 152 4>,
+			 <&k3_clks 152 9>,
+			 <&k3_clks 152 13>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+
+		dss_ports: ports {
+		};
+	};
+
+	mcasp0: mcasp@2b00000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b00000 0x0 0x2000>,
+			<0x0 0x02b08000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 174 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp1: mcasp@2b10000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b10000 0x0 0x2000>,
+			<0x0 0x02b18000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 175 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp2: mcasp@2b20000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b20000 0x0 0x2000>,
+			<0x0 0x02b28000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 176 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp3: mcasp@2b30000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b30000 0x0 0x2000>,
+			<0x0 0x02b38000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 177 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp4: mcasp@2b40000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b40000 0x0 0x2000>,
+			<0x0 0x02b48000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 178 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp5: mcasp@2b50000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b50000 0x0 0x2000>,
+			<0x0 0x02b58000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 179 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp6: mcasp@2b60000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b60000 0x0 0x2000>,
+			<0x0 0x02b68000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 180 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp7: mcasp@2b70000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b70000 0x0 0x2000>,
+			<0x0 0x02b78000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 181 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp8: mcasp@2b80000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b80000 0x0 0x2000>,
+			<0x0 0x02b88000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 182 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp9: mcasp@2b90000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02b90000 0x0 0x2000>,
+			<0x0 0x02b98000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 183 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp10: mcasp@2ba0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02ba0000 0x0 0x2000>,
+			<0x0 0x02ba8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 184 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcasp11: mcasp@2bb0000 {
+		compatible = "ti,am33xx-mcasp-audio";
+		reg = <0x0 0x02bb0000 0x0 0x2000>,
+			<0x0 0x02bb8000 0x0 0x1000>;
+		reg-names = "mpu","dat";
+		interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tx", "rx";
+
+		dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+		dma-names = "tx", "rx";
+
+		clocks = <&k3_clks 185 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	watchdog0: watchdog@2200000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2200000 0x0 0x100>;
+		clocks = <&k3_clks 252 1>;
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 252 1>;
+		assigned-clock-parents = <&k3_clks 252 5>;
+	};
+
+	watchdog1: watchdog@2210000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		clocks = <&k3_clks 253 1>;
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 253 1>;
+		assigned-clock-parents = <&k3_clks 253 5>;
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5c00000 0x00008000>,
+			      <0x5c10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "j7-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5d00000 0x00008000>,
+			      <0x5d10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <246>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 246 1>;
+			firmware-name = "j7-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5e00000 0x00008000>,
+			      <0x5e10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <247>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 247 1>;
+			firmware-name = "j7-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x5f00000 0x00008000>,
+			      <0x5f10000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <248>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 248 1>;
+			firmware-name = "j7-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c66_0: dsp@4d80800000 {
+		compatible = "ti,j721e-c66-dsp";
+		reg = <0x4d 0x80800000 0x00 0x00048000>,
+		      <0x4d 0x80e00000 0x00 0x00008000>,
+		      <0x4d 0x80f00000 0x00 0x00008000>;
+		reg-names = "l2sram", "l1pram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <142>;
+		ti,sci-proc-ids = <0x03 0xff>;
+		resets = <&k3_reset 142 1>;
+		firmware-name = "j7-c66_0-fw";
+		status = "disabled";
+	};
+
+	c66_1: dsp@4d81800000 {
+		compatible = "ti,j721e-c66-dsp";
+		reg = <0x4d 0x81800000 0x00 0x00048000>,
+		      <0x4d 0x81e00000 0x00 0x00008000>,
+		      <0x4d 0x81f00000 0x00 0x00008000>;
+		reg-names = "l2sram", "l1pram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <143>;
+		ti,sci-proc-ids = <0x04 0xff>;
+		resets = <&k3_reset 143 1>;
+		firmware-name = "j7-c66_1-fw";
+		status = "disabled";
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721e-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <15>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 15 1>;
+		firmware-name = "j7-c71_0-fw";
+		status = "disabled";
+	};
+
+	icssg0: icssg@b000000 {
+		compatible = "ti,j721e-icssg";
+		reg = <0x00 0xb000000 0x00 0x80000>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x0b000000 0x100000>;
+
+		icssg0_mem: memories@0 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg0_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg0_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 119 24>, /* icssg0_core_clk */
+						 <&k3_clks 119 1>;  /* icssg0_iclk */
+					assigned-clocks = <&icssg0_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 119 1>;
+				};
+
+				icssg0_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 119 3>,	/* icssg0_iep_clk */
+						 <&icssg0_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg0_iepclk_mux>;
+					assigned-clock-parents = <&icssg0_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg0_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg0_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg0_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru0_0: pru@34000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x34000 0x3000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru0_0-fw";
+		};
+
+		rtu0_0: rtu@4000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu0_0-fw";
+		};
+
+		tx_pru0_0: txpru@a000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru0_0-fw";
+		};
+
+		pru0_1: pru@38000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x38000 0x3000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru0_1-fw";
+		};
+
+		rtu0_1: rtu@6000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu0_1-fw";
+		};
+
+		tx_pru0_1: txpru@c000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru0_1-fw";
+		};
+
+		icssg0_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 119 1>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	icssg1: icssg@b100000 {
+		compatible = "ti,j721e-icssg";
+		reg = <0x00 0xb100000 0x00 0x80000>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x0b100000 0x100000>;
+
+		icssg1_mem: memories@b100000 {
+			reg = <0x0 0x2000>,
+			      <0x2000 0x2000>,
+			      <0x10000 0x10000>;
+			reg-names = "dram0", "dram1",
+				    "shrdram2";
+		};
+
+		icssg1_cfg: cfg@26000 {
+			compatible = "ti,pruss-cfg", "syscon";
+			reg = <0x26000 0x200>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x2000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				icssg1_coreclk_mux: coreclk-mux@3c {
+					reg = <0x3c>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 120 54>, /* icssg1_core_clk */
+						 <&k3_clks 120 4>;  /* icssg1_iclk */
+					assigned-clocks = <&icssg1_coreclk_mux>;
+					assigned-clock-parents = <&k3_clks 120 4>;
+				};
+
+				icssg1_iepclk_mux: iepclk-mux@30 {
+					reg = <0x30>;
+					#clock-cells = <0>;
+					clocks = <&k3_clks 120 9>,	/* icssg1_iep_clk */
+						 <&icssg1_coreclk_mux>;	/* core_clk */
+					assigned-clocks = <&icssg1_iepclk_mux>;
+					assigned-clock-parents = <&icssg1_coreclk_mux>;
+				};
+			};
+		};
+
+		icssg1_mii_rt: mii-rt@32000 {
+			compatible = "ti,pruss-mii", "syscon";
+			reg = <0x32000 0x100>;
+		};
+
+		icssg1_mii_g_rt: mii-g-rt@33000 {
+			compatible = "ti,pruss-mii-g", "syscon";
+			reg = <0x33000 0x1000>;
+		};
+
+		icssg1_intc: interrupt-controller@20000 {
+			compatible = "ti,icssg-intc";
+			reg = <0x20000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host_intr0", "host_intr1",
+					  "host_intr2", "host_intr3",
+					  "host_intr4", "host_intr5",
+					  "host_intr6", "host_intr7";
+		};
+
+		pru1_0: pru@34000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x34000 0x4000>,
+			      <0x22000 0x100>,
+			      <0x22400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru1_0-fw";
+		};
+
+		rtu1_0: rtu@4000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x4000 0x2000>,
+			      <0x23000 0x100>,
+			      <0x23400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu1_0-fw";
+		};
+
+		tx_pru1_0: txpru@a000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xa000 0x1800>,
+			      <0x25000 0x100>,
+			      <0x25400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru1_0-fw";
+		};
+
+		pru1_1: pru@38000 {
+			compatible = "ti,j721e-pru";
+			reg = <0x38000 0x4000>,
+			      <0x24000 0x100>,
+			      <0x24400 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-pru1_1-fw";
+		};
+
+		rtu1_1: rtu@6000 {
+			compatible = "ti,j721e-rtu";
+			reg = <0x6000 0x2000>,
+			      <0x23800 0x100>,
+			      <0x23c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-rtu1_1-fw";
+		};
+
+		tx_pru1_1: txpru@c000 {
+			compatible = "ti,j721e-tx-pru";
+			reg = <0xc000 0x1800>,
+			      <0x25800 0x100>,
+			      <0x25c00 0x100>;
+			reg-names = "iram", "control", "debug";
+			firmware-name = "j7-txpru1_1-fw";
+		};
+
+		icssg1_mdio: mdio@32400 {
+			compatible = "ti,davinci_mdio";
+			reg = <0x32400 0x100>;
+			clocks = <&k3_clks 120 4>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>, <&k3_clks 156 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>, <&k3_clks 158 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 160 0>, <&k3_clks 160 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 161 0>, <&k3_clks 161 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>, <&k3_clks 163 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>, <&k3_clks 164 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>, <&k3_clks 165 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>, <&k3_clks 166 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 167 0>, <&k3_clks 167 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 168 0>, <&k3_clks 168 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 169 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 169 0>, <&k3_clks 169 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 170 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 170 0>, <&k3_clks 170 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 171 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 171 0>, <&k3_clks 171 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 266 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 267 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 268 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 269 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 270 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 271 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 272 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 273 1>;
+		status = "disabled";
+	};
+
+	main_esm: esm@700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <344>, <345>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
new file mode 100644
index 000000000..05d6ef127
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04200 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04280 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 1>;
+		assigned-clock-parents = <&k3_clks 35 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 71 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 71 1>, <&k3_clks 322 0>;
+		assigned-clock-parents = <&k3_clks 71 2>, <&k3_clks 322 1>;
+		power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 72 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 72 1>;
+		assigned-clock-parents = <&k3_clks 72 2>;
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 73 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 73 1>, <&k3_clks 323 0>;
+		assigned-clock-parents = <&k3_clks 73 2>, <&k3_clks 323 1>;
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer4: timer@40440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 74 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 74 1>;
+		assigned-clock-parents = <&k3_clks 74 2>;
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer5: timer@40450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 75 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 75 1>, <&k3_clks 324 0>;
+		assigned-clock-parents = <&k3_clks 75 2>, <&k3_clks 324 1>;
+		power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer6: timer@40460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 76 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 76 1>;
+		assigned-clock-parents = <&k3_clks 76 2>;
+		power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer7: timer@40470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 77 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 77 1>, <&k3_clks 325 0>;
+		assigned-clock-parents = <&k3_clks 77 2>, <&k3_clks 325 1>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer8: timer@40480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 78 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 78 1>;
+		assigned-clock-parents = <&k3_clks 78 2>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer9: timer@40490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 79 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 79 1>, <&k3_clks 326 0>;
+		assigned-clock-parents = <&k3_clks 79 2>, <&k3_clks 326 1>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		status = "disabled";
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <137>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42110000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x42100000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <84>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 0>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 0>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 0>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>;
+		status = "disabled";
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		reg = <0x0 0x47000000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hbmc_mux: mux-controller@47000004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x2>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4 0x2>; /* HBMC select */
+		};
+
+		hbmc: hyperbus@47034000 {
+			compatible = "ti,am654-hbmc";
+			reg = <0x00 0x47034000 0x00 0x100>,
+				<0x05 0x00000000 0x01 0x0000000>;
+			power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+			clocks = <&k3_clks 102 0>;
+			assigned-clocks = <&k3_clks 102 5>;
+			assigned-clock-rates = <333333333>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			mux-controls = <&hbmc_mux 0>;
+			status = "disabled";
+		};
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 103 0>;
+			assigned-clocks = <&k3_clks 103 0>;
+			assigned-clock-parents = <&k3_clks 103 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 104 0>;
+			power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 1>;
+		assigned-clocks = <&k3_clks 0 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 1>;
+		assigned-clocks = <&k3_clks 1 3>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>,
+			      <0x0 0x28440000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x0 0x2a480000 0x0 0x80000>,
+		      <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 18 22>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 22>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j721e-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <250>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 250 1>;
+			firmware-name = "j7-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j721e-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <251>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 251 1>;
+			firmware-name = "j7-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 172 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 172 0>, <&k3_clks 172 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 173 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 173 0>, <&k3_clks 173 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 274 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 275 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 0>;
+		status = "disabled";
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j721e-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>,
+		      <0x00 0x43000300 0x00 0x10>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
new file mode 100644
index 000000000..42fe8eee9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -0,0 +1,1074 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * J721E SK URL: https://www.ti.com/tool/SK-TDA4VM
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,j721e-sk", "ti,j721e";
+	model = "Texas Instruments J721E SK";
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		ethernet0 = &cpsw_port1;
+		mmc1 = &main_sdhci1;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	vusb_main: fixedregulator-vusb-main5v0 {
+		/* USB MAIN INPUT 5V DC */
+		compatible = "regulator-fixed";
+		regulator-name = "vusb-main5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5141 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vusb_main>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_mmc1_en_pins_default>;
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&wkup_gpio0 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv_alt: gpio-regulator-tps659411 {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_alt_pins_default>;
+		regulator-name = "tps659411";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_3v3>;
+		gpios = <&wkup_gpio0 9 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	dp_pwr_3v3: fixedregulator-dp-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_pwr_en_pins_default>;
+		gpio = <&main_gpio0 111 0>;	/* DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp_pwr_3v3>;
+
+		port {
+			dp_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins_default>;
+
+		ddc-i2c-bus = <&main_i2c1>;
+
+		/* HDMI_HPD */
+		hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-bridge {
+		compatible = "ti,tfp410";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_pdn_pins_default>;
+
+		powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>;
+		ti,deskew = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+					pclk-sample = <1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint =
+						<&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
+			J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
+			J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
+			J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
+			J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
+			J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
+			J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
+		>;
+	};
+
+	main_uart0_pins_default: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */
+			J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */
+			J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
+			J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
+		>;
+	};
+
+	main_uart1_pins_default: main-uart1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */
+			J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */
+			J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */
+			J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */
+			J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
+		>;
+	};
+
+	main_usbss1_pins_default: main-usbss1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */
+		>;
+	};
+
+	dp0_pins_default: dp0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
+		>;
+	};
+
+	dp_pwr_en_pins_default: dp-pwr-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1c0, PIN_INPUT, 7) /* (AA2) SPI0_CS0.GPIO0_111 */
+		>;
+	};
+
+	dss_vout0_pins_default: dss-vout0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x58, PIN_OUTPUT, 10) /* (AE22) PRG1_PRU1_GPO0.VOUT0_DATA0 */
+			J721E_IOPAD(0x5c, PIN_OUTPUT, 10) /* (AG23) PRG1_PRU1_GPO1.VOUT0_DATA1 */
+			J721E_IOPAD(0x60, PIN_OUTPUT, 10) /* (AF23) PRG1_PRU1_GPO2.VOUT0_DATA2 */
+			J721E_IOPAD(0x64, PIN_OUTPUT, 10) /* (AD23) PRG1_PRU1_GPO3.VOUT0_DATA3 */
+			J721E_IOPAD(0x68, PIN_OUTPUT, 10) /* (AH24) PRG1_PRU1_GPO4.VOUT0_DATA4 */
+			J721E_IOPAD(0x6c, PIN_OUTPUT, 10) /* (AG21) PRG1_PRU1_GPO5.VOUT0_DATA5 */
+			J721E_IOPAD(0x70, PIN_OUTPUT, 10) /* (AE23) PRG1_PRU1_GPO6.VOUT0_DATA6 */
+			J721E_IOPAD(0x74, PIN_OUTPUT, 10) /* (AC21) PRG1_PRU1_GPO7.VOUT0_DATA7 */
+			J721E_IOPAD(0x78, PIN_OUTPUT, 10) /* (Y23) PRG1_PRU1_GPO8.VOUT0_DATA8 */
+			J721E_IOPAD(0x7c, PIN_OUTPUT, 10) /* (AF21) PRG1_PRU1_GPO9.VOUT0_DATA9 */
+			J721E_IOPAD(0x80, PIN_OUTPUT, 10) /* (AB23) PRG1_PRU1_GPO10.VOUT0_DATA10 */
+			J721E_IOPAD(0x84, PIN_OUTPUT, 10) /* (AJ25) PRG1_PRU1_GPO11.VOUT0_DATA11 */
+			J721E_IOPAD(0x88, PIN_OUTPUT, 10) /* (AH25) PRG1_PRU1_GPO12.VOUT0_DATA12 */
+			J721E_IOPAD(0x8c, PIN_OUTPUT, 10) /* (AG25) PRG1_PRU1_GPO13.VOUT0_DATA13 */
+			J721E_IOPAD(0x90, PIN_OUTPUT, 10) /* (AH26) PRG1_PRU1_GPO14.VOUT0_DATA14 */
+			J721E_IOPAD(0x94, PIN_OUTPUT, 10) /* (AJ27) PRG1_PRU1_GPO15.VOUT0_DATA15 */
+			J721E_IOPAD(0x30, PIN_OUTPUT, 10) /* (AF24) PRG1_PRU0_GPO11.VOUT0_DATA16 */
+			J721E_IOPAD(0x34, PIN_OUTPUT, 10) /* (AJ24) PRG1_PRU0_GPO12.VOUT0_DATA17 */
+			J721E_IOPAD(0x38, PIN_OUTPUT, 10) /* (AG24) PRG1_PRU0_GPO13.VOUT0_DATA18 */
+			J721E_IOPAD(0x3c, PIN_OUTPUT, 10) /* (AD24) PRG1_PRU0_GPO14.VOUT0_DATA19 */
+			J721E_IOPAD(0x40, PIN_OUTPUT, 10) /* (AC24) PRG1_PRU0_GPO15.VOUT0_DATA20 */
+			J721E_IOPAD(0x44, PIN_OUTPUT, 10) /* (AE24) PRG1_PRU0_GPO16.VOUT0_DATA21 */
+			J721E_IOPAD(0x24, PIN_OUTPUT, 10) /* (AJ20) PRG1_PRU0_GPO8.VOUT0_DATA22 */
+			J721E_IOPAD(0x28, PIN_OUTPUT, 10) /* (AG20) PRG1_PRU0_GPO9.VOUT0_DATA23 */
+			J721E_IOPAD(0x9c, PIN_OUTPUT, 10) /* (AC22) PRG1_PRU1_GPO17.VOUT0_DE */
+			J721E_IOPAD(0x98, PIN_OUTPUT, 10) /* (AJ26) PRG1_PRU1_GPO16.VOUT0_HSYNC */
+			J721E_IOPAD(0xa4, PIN_OUTPUT, 10) /* (AH22) PRG1_PRU1_GPO19.VOUT0_PCLK */
+			J721E_IOPAD(0xa0, PIN_OUTPUT, 10) /* (AJ22) PRG1_PRU1_GPO18.VOUT0_VSYNC */
+		>;
+	};
+
+	hdmi_hpd_pins_default: hdmi-hpd-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */
+		>;
+	};
+
+	hdmi_pdn_pins_default: hdmi-pdn-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+		>;
+	};
+
+	/* Reset for M.2 E Key slot on PCIe0  */
+	ekey_reset_pins_default: ekey-reset-pns-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
+		>;
+	};
+
+	main_i2c5_pins_default: main-i2c5-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01C, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14C, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02C, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1B0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1A0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1D0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11C, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19C, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1B4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00C, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+			J721E_IOPAD(0x178, PIN_INPUT, 7) /* (U27) RGMII5_RD3.GPIO0_93 */
+			J721E_IOPAD(0x17C, PIN_INPUT, 7) /* (U24) RGMII5_RD2.GPIO0_94 */
+			J721E_IOPAD(0x190, PIN_INPUT, 7) /* (W23) RGMII6_TD3.GPIO0_99 */
+			J721E_IOPAD(0x18C, PIN_INPUT, 7) /* (V23) RGMII6_RX_CTL.GPIO0_98 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */
+			J721E_WKUP_IOPAD(0x80, PIN_INPUT, 0) /* (A24) MCU_RGMII1_RD1 */
+			J721E_WKUP_IOPAD(0x7c, PIN_INPUT, 0) /* (D24) MCU_RGMII1_RD2 */
+			J721E_WKUP_IOPAD(0x78, PIN_INPUT, 0) /* (A25) MCU_RGMII1_RD3 */
+			J721E_WKUP_IOPAD(0x74, PIN_INPUT, 0) /* (C24) MCU_RGMII1_RXC */
+			J721E_WKUP_IOPAD(0x5c, PIN_INPUT, 0) /* (C25) MCU_RGMII1_RX_CTL */
+			J721E_WKUP_IOPAD(0x6c, PIN_OUTPUT, 0) /* (B25) MCU_RGMII1_TD0 */
+			J721E_WKUP_IOPAD(0x68, PIN_OUTPUT, 0) /* (A26) MCU_RGMII1_TD1 */
+			J721E_WKUP_IOPAD(0x64, PIN_OUTPUT, 0) /* (A27) MCU_RGMII1_TD2 */
+			J721E_WKUP_IOPAD(0x60, PIN_OUTPUT, 0) /* (A28) MCU_RGMII1_TD3 */
+			J721E_WKUP_IOPAD(0x70, PIN_OUTPUT, 0) /* (B26) MCU_RGMII1_TXC */
+			J721E_WKUP_IOPAD(0x58, PIN_OUTPUT, 0) /* (B27) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio1-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x8c, PIN_OUTPUT, 0) /* (F23) MCU_MDIO0_MDC */
+			J721E_WKUP_IOPAD(0x88, PIN_INPUT, 0) /* (E23) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 0) /* (E20) MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 0) /* (F19) MCU_OSPI0_CSn0 */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 0) /* (D20) MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 0) /* (G20) MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 0) /* (F21) MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 0) /* (E21) MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 0) /* (B22) MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 0) /* (G21) MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21) MCU_OSPI0_DQS */
+		>;
+	};
+
+	vdd_mmc1_en_pins_default: vdd-mmc1-en-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd0, PIN_OUTPUT, 7) /* (G27) WKUP_GPIO0_8 */
+		>;
+	};
+
+	vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xd4, PIN_OUTPUT, 7) /* (G26) WKUP_GPIO0_9 */
+		>;
+	};
+
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf0, PIN_INPUT, 2) /* (D26) MCU_I3C0_SCL.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xf4, PIN_OUTPUT, 2)/* (D25) MCU_I3C0_SDA.MCU_UART0_RTSn */
+			J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0)/* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	/* Reset for M.2 M Key slot on PCIe1  */
+	mkey_reset_pins_default: mkey-reset-pns-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xdc, PIN_INPUT, 7) /* (H27) WKUP_GPIO0_11 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@51 {
+		/* AT24C512C-MAHM-T */
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+	};
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	/* Shared with ATF on this platform */
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_sdhci1 {
+	/* SD Card */
+	status = "okay";
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv_alt>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@7c0000 {
+				label = "ospi.env.backup";
+				reg = <0x7c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		/* PCIe1 M.2 M Key I2C */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		/* PCIe0 M.2 E Key I2C */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&main_i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	/* i2c1 is used for DVI DDC, so we need to use 100kHz */
+	clock-frequency = <100000>;
+};
+
+&main_i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		/* CSI0 I2C */
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		/* CSI1 I2C */
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&main_i2c5 {
+	/* Brought out on RPi Header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_gpio0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
+};
+
+&main_gpio1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&usb_serdes_mux {
+	idle-states = <1>, <1>; /* USB0 to SERDES3, USB1 to SERDES2 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_IP4_UNUSED>,
+		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
+		      <J721E_SERDES2_LANE0_IP1_UNUSED>, <J721E_SERDES2_LANE1_USB3_1>,
+		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
+		      <J721E_SERDES4_LANE0_EDP_LANE0>, <J721E_SERDES4_LANE1_EDP_LANE1>,
+		      <J721E_SERDES4_LANE2_EDP_LANE2>, <J721E_SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
+&serdes4 {
+	torrent_phy_dp: phy@0 {
+		reg = <0>;
+		resets = <&serdes_wiz4 1>;
+		cdns,phy-type = <PHY_TYPE_DP>;
+		cdns,num-lanes = <4>;
+		cdns,max-bit-rate = <5400>;
+		#phy-cells = <0>;
+	};
+};
+
+&mhdp {
+	phys = <&torrent_phy_dp>;
+	phy-names = "dpphy";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp0_pins_default>;
+};
+
+&usbss0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&serdes2 {
+	serdes2_usb_link: phy@1 {
+		reg = <1>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz2 2>;
+	};
+};
+
+&usbss1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usbss1_pins_default>;
+	ti,vbus-divider;
+};
+
+&usb1 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	phys = <&serdes2_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_vout0_pins_default>;
+
+	assigned-clocks = <&k3_clks 152 1>,	/* VP 1 pixel clock */
+			  <&k3_clks 152 4>,	/* VP 2 pixel clock */
+			  <&k3_clks 152 9>,	/* VP 3 pixel clock */
+			  <&k3_clks 152 13>;	/* VP 4 pixel clock */
+	assigned-clock-parents = <&k3_clks 152 2>,	/* PLL16_HSDIV0 */
+				 <&k3_clks 152 6>,	/* DPI0_EXT_CLKSEL_OUT0 */
+				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
+				 <&k3_clks 152 18>;	/* DPI1_EXT_CLKSEL_OUT0 */
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0  {
+		reg = <0>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+		};
+	};
+};
+
+&dp0_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@0 {
+		reg = <0>;
+		dp0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		dp0_out: endpoint {
+			remote-endpoint = <&dp_connector_in>;
+		};
+	};
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&serdes1 {
+	serdes1_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz1 1>, <&serdes_wiz1 2>;
+	};
+};
+
+&pcie0_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ekey_reset_pins_default>;
+	reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_HIGH>;
+
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mkey_reset_pins_default>;
+	reset-gpios = <&wkup_gpio0 11 GPIO_ACTIVE_HIGH>;
+
+	phys = <&serdes1_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <2>;
+};
+
+&ufs_wrapper {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
new file mode 100644
index 000000000..7f0686c2c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2020 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Product Link: https://www.ti.com/tool/J721EXSOMXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_0_memory_region: c66-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c66_1_memory_region: c66-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		rtos_ipc_memory_region: ipc-memories@aa000000 {
+			reg = <0x00 0xaa000000 0x00 0x01c00000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */
+			J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0)  /* MCU_OSPI0_DQS */
+			J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0)  /* MCU_OSPI0_D0 */
+			J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0)  /* MCU_OSPI0_D1 */
+			J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0)  /* MCU_OSPI0_D2 */
+			J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0)  /* MCU_OSPI0_D3 */
+			J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0)  /* MCU_OSPI0_D4 */
+			J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0)  /* MCU_OSPI0_D5 */
+			J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0)  /* MCU_OSPI0_D6 */
+			J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0)  /* MCU_OSPI0_D7 */
+			J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */
+		>;
+	};
+
+	mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-default-pins {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1)  /* MCU_HYPERBUS0_CK */
+			J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1)  /* MCU_HYPERBUS0_CKn */
+			J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_CSn0 */
+			J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* MCU_HYPERBUS0_CSn1 */
+			J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* MCU_HYPERBUS0_RESETn */
+			J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1)   /* MCU_HYPERBUS0_RWDS */
+			J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1)   /* MCU_HYPERBUS0_DQ0 */
+			J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ1 */
+			J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ2 */
+			J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ3 */
+			J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ4 */
+			J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ5 */
+			J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ6 */
+			J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1)  /* MCU_HYPERBUS0_DQ7 */
+		>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x20000>;
+			};
+
+			partition@6a0000 {
+				label = "ospi.env.backup";
+				reg = <0x6a0000 0x20000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fe0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fe0000 0x20000>;
+			};
+		};
+	};
+};
+
+&hbmc {
+	/* OSPI and HBMC are muxed inside FSS, Bootloader will enable
+	 * appropriate node based on board detection
+	 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
+	ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
+		 <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
+
+	flash@0,0 {
+		compatible = "cypress,hyperflash", "cfi-flash";
+		reg = <0x00 0x00 0x4000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "hbmc.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "hbmc.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "hbmc.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "hbmc.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "hbmc.sysfw";
+				reg = <0x6c0000 0x100000>;
+			};
+
+			partition@800000 {
+				label = "hbmc.rootfs";
+				reg = <0x800000 0x3800000>;
+			};
+		};
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3>, <&mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4>, <&mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
new file mode 100644
index 000000000..c25232790
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	wkup_thermal: wkup-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			wkup_crit: wkup-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	mpu_thermal: mpu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			mpu_crit: mpu-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	c7x_thermal: c7x-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			c7x_crit: c7x-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	gpu_thermal: gpu-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 3>;
+
+		trips {
+			gpu_crit: gpu-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	r5f_thermal: r5f-thermal {
+		polling-delay-passive = <250>; /* milliseconds */
+		polling-delay = <500>; /* milliseconds */
+		thermal-sensors = <&wkup_vtm0 4>;
+
+		trips {
+			r5f_crit: r5f-crit {
+				temperature = <125000>; /* milliCelsius */
+				hysteresis = <2000>; /* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
new file mode 100644
index 000000000..a200810df
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 J721E SoC";
+	compatible = "ti,j721e";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
+			 <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x0c000000 0x00 0x0c000000 0x00 0x0d000000>, /* CPSW9G */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01800000>, /* PCIe Core*/
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
+			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
+			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+			 <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+		};
+	};
+
+	#include "k3-j721e-thermal.dtsi"
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j721e-main.dtsi"
+#include "k3-j721e-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
new file mode 100644
index 000000000..c6b85bbf9
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2-som-p0.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "k3-serdes.h"
+
+/ {
+	compatible = "ti,j721s2-evm", "ti,j721s2";
+	model = "Texas Instruments J721S2 EVM";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
+		can3 = &main_mcan3;
+		can4 = &main_mcan5;
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: fixedregulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: gpio-regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+
+	transceiver1: can-phy1 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan0_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 69 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver2: can-phy2 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcu_mcan1_gpio_pins_default>;
+		standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver3: can-phy3 {
+		compatible = "ti,tcan1043";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux0 1>;
+	};
+
+	transceiver4: can-phy4 {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+		mux-states = <&mux1 1>;
+	};
+};
+
+&main_pmx0 {
+	main_uart8_pins_default: main-uart8-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x040, PIN_INPUT, 14) /* (AC28) MCASP0_AXR0.UART8_CTSn */
+			J721S2_IOPAD(0x044, PIN_OUTPUT, 14) /* (Y26) MCASP0_AXR1.UART8_RTSn */
+			J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */
+			J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c3_pins_default: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x064, PIN_INPUT_PULLUP, 13) /* (W28) MCAN0_TX.I2C3_SCL */
+			J721S2_IOPAD(0x060, PIN_INPUT_PULLUP, 13) /* (AC27) MCASP2_AXR1.I2C3_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */
+			J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */
+			J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */
+			J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */
+			J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
+			J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */
+			J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */
+			J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+
+	main_usbss0_pins_default: main-usbss0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
+		>;
+	};
+
+	main_mcan3_pins_default: main-mcan3-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x080, PIN_INPUT, 0) /* (U26) MCASP0_AXR4.MCAN3_RX */
+			J721S2_IOPAD(0x07c, PIN_OUTPUT, 0) /* (T27) MCASP0_AXR3.MCAN3_TX */
+		>;
+	};
+
+	main_mcan5_pins_default: main-mcan5-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x03c, PIN_INPUT, 0) /* (U27) MCASP0_AFSX.MCAN5_RX */
+			J721S2_IOPAD(0x038, PIN_OUTPUT, 0) /* (AB28) MCASP0_ACLKX.MCAN5_TX */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */
+			J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
+			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
+			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */
+			J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */
+		>;
+	};
+
+	mcu_mcan1_pins_default: mcu-mcan1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x06c, PIN_INPUT, 0) /* (F26) WKUP_GPIO0_5.MCU_MCAN1_RX */
+			J721S2_WKUP_IOPAD(0x068, PIN_OUTPUT, 0) /*(C23) WKUP_GPIO0_4.MCU_MCAN1_TX */
+		>;
+	};
+
+	mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 7) /* (D26) WKUP_GPIO0_0 */
+			J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 7) /* (B25) MCU_SPI0_D1.WKUP_GPIO0_69 */
+		>;
+	};
+
+	mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x060, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (L25) MCU_ADC0_AIN0 */
+			J721S2_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (K25) MCU_ADC0_AIN1 */
+			J721S2_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (M24) MCU_ADC0_AIN2 */
+			J721S2_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (L24) MCU_ADC0_AIN3 */
+			J721S2_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (L27) MCU_ADC0_AIN4 */
+			J721S2_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (K24) MCU_ADC0_AIN5 */
+			J721S2_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (M27) MCU_ADC0_AIN6 */
+			J721S2_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (M26) MCU_ADC0_AIN7 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (P25) MCU_ADC1_AIN0 */
+			J721S2_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (R25) MCU_ADC1_AIN1 */
+			J721S2_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (P28) MCU_ADC1_AIN2 */
+			J721S2_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (P27) MCU_ADC1_AIN3 */
+			J721S2_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (N25) MCU_ADC1_AIN4 */
+			J721S2_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (P26) MCU_ADC1_AIN5 */
+			J721S2_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (N26) MCU_ADC1_AIN6 */
+			J721S2_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (N27) MCU_ADC1_AIN7 */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+			J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
+		>;
+	};
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&wkup_gpio0 {
+	status = "okay";
+};
+
+&wkup_uart0 {
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+	/* Shared with TFA on this platform */
+	power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>;
+};
+
+&main_i2c0 {
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PCIE_2L_MODE_SEL", "PCIE_2L_PERSTZ", "PCIE_2L_RC_RSTZ",
+				  "PCIE_2L_EP_RST_EN", "PCIE_1L_MODE_SEL", "PCIE_1L_PERSTZ",
+				  "PCIE_1L_RC_RSTZ", "PCIE_1L_EP_RST_EN", "PCIE_2L_PRSNT#",
+				  "PCIE_1L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3", "EXP_MUX1",
+				  "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTz";
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "APPLE_AUTH_RSTZ", "MLB_RSTZ", "GPIO_USD_PWR_EN", "USBC_PWR_EN",
+				  "USBC_MODE_SEL1", "USBC_MODE_SEL0", "MCAN0_EN", "MCAN0_STB#",
+				  "MUX_SPAREMUX_SPARE", "MCASP/TRACE_MUX_S0", "MCASP/TRACE_MUX_S1",
+				  "MLB_MUX_SEL", "MCAN_MUX_SEL", "MCASP2/SPI3_MUX_SEL", "PCIe_CLKREQn_MUX_SEL",
+				  "CDCI2_RSTZ", "ENET_EXP_PWRDN", "ENET_EXP_RESETZ", "ENET_I2CMUX_SEL",
+				  "ENET_EXP_SPARE2", "M2PCIE_RTSZ", "USER_INPUT1", "USER_LED1", "USER_LED2";
+	};
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&mcu_cpsw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+};
+
+&davinci_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&phy0>;
+};
+
+&serdes_ln_ctrl {
+	idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>,
+		      <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>;
+};
+
+&serdes_refclk {
+	clock-frequency = <100000000>;
+};
+
+&serdes0 {
+	status = "okay";
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&usb_serdes_mux {
+	idle-states = <1>; /* USB0 to SERDES lane 1 */
+};
+
+&usbss0 {
+	status = "okay";
+	pinctrl-0 = <&main_usbss0_pins_default>;
+	pinctrl-names = "default";
+	ti,vbus-divider;
+	ti,usb2-only;
+};
+
+&usb0 {
+	dr_mode = "otg";
+	maximum-speed = "high-speed";
+};
+
+&ospi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&mcu_mcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan0_pins_default>;
+	phys = <&transceiver1>;
+};
+
+&mcu_mcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mcan1_pins_default>;
+	phys = <&transceiver2>;
+};
+
+&tscadc0 {
+	pinctrl-0 = <&mcu_adc0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	pinctrl-0 = <&mcu_adc1_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&main_mcan3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan3_pins_default>;
+	phys = <&transceiver3>;
+};
+
+&main_mcan5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mcan5_pins_default>;
+	phys = <&transceiver4>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
new file mode 100644
index 000000000..b78feea31
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * DT Overlay for MAIN CPSW2G using GESI Expansion Board with J7 common processor board.
+ *
+ * GESI Board Product Link: https://www.ti.com/tool/J7EXPCXEVM
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet1 = "/bus@100000/ethernet@c200000/ethernet-ports/port@1";
+	};
+};
+
+&main_pmx0 {
+	main_cpsw_mdio_default_pins: main-cpsw-mdio-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */
+			J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
+
+	rgmii1_default_pins: rgmii1-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */
+			J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */
+			J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */
+			J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */
+			J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */
+			J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */
+			J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */
+			J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */
+			J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */
+			J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */
+			J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */
+			J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+};
+
+&exp1 {
+	p15 {
+		/* P15 - EXP_MUX2 */
+		gpio-hog;
+		gpios = <13 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "EXP_MUX2";
+	};
+};
+
+&main_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_default_pins>;
+};
+
+&main_cpsw_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw_mdio_default_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	main_cpsw_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&main_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&main_cpsw_phy0>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
new file mode 100644
index 000000000..084f8f5b6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -0,0 +1,1698 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: clock-cmnrefclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x400000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x400000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+
+		tifs-sram@1f0000 {
+			reg = <0x1f0000 0x10000>;
+		};
+
+		l3cache-sram@200000 {
+			reg = <0x200000 0x200000>;
+		};
+	};
+
+	scm_conf: syscon@104000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x00104000 0x00 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x00104000 0x18000>;
+
+		usb_serdes_mux: mux-controller@0 {
+			compatible = "mmio-mux";
+			reg = <0x0 0x4>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+		};
+
+		phy_gmii_sel_cpsw: phy@34 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x34 0x4>;
+			#phy-cells = <1>;
+		};
+
+		serdes_ln_ctrl: mux-controller@80 {
+			compatible = "mmio-mux";
+			reg = <0x80 0x10>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
+					<0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+		};
+
+		ehrpwm_tbclk: clock-controller@140 {
+			compatible = "ti,am654-ehrpwm-tbclk";
+			reg = <0x140 0x18>;
+			#clock-cells = <1>;
+		};
+	};
+
+	main_ehrpwm0: pwm@3000000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3000000 0x00 0x100>;
+		power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 0>, <&k3_clks 160 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm1: pwm@3010000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3010000 0x00 0x100>;
+		power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 1>, <&k3_clks 161 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm2: pwm@3020000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3020000 0x00 0x100>;
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 2>, <&k3_clks 162 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm3: pwm@3030000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3030000 0x00 0x100>;
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 3>, <&k3_clks 163 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm4: pwm@3040000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3040000 0x00 0x100>;
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 4>, <&k3_clks 164 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	main_ehrpwm5: pwm@3050000 {
+		compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+		#pwm-cells = <3>;
+		reg = <0x00 0x3050000 0x00 0x100>;
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&ehrpwm_tbclk 5>, <&k3_clks 165 0>;
+		clock-names = "tbclk", "fck";
+		status = "disabled";
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x100000>, /* GICD */
+		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <148>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x04e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+		       <&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x04e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 63 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 63 1>;
+		assigned-clock-parents = <&k3_clks 63 2>;
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 64 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 64 1>;
+		assigned-clock-parents = <&k3_clks 64 2>;
+		power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 65 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 65 1>;
+		assigned-clock-parents = <&k3_clks 65 2>;
+		power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 66 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 66 1>;
+		assigned-clock-parents = <&k3_clks 66 2>;
+		power-domains = <&k3_pds 66 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 67 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 67 1>;
+		assigned-clock-parents = <&k3_clks 67 2>;
+		power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 68 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 68 1>;
+		assigned-clock-parents = <&k3_clks 68 2>;
+		power-domains = <&k3_pds 68 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 69 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 69 1>;
+		assigned-clock-parents = <&k3_clks 69 2>;
+		power-domains = <&k3_pds 69 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 70 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 70 1>;
+		assigned-clock-parents = <&k3_clks 70 2>;
+		power-domains = <&k3_pds 70 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 71 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 71 1>;
+		assigned-clock-parents = <&k3_clks 71 2>;
+		power-domains = <&k3_pds 71 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 72 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 72 1>;
+		assigned-clock-parents = <&k3_clks 72 2>;
+		power-domains = <&k3_pds 72 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 73 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 73 1>;
+		assigned-clock-parents = <&k3_clks 73 2>;
+		power-domains = <&k3_pds 73 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 74 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 74 1>;
+		assigned-clock-parents = <&k3_clks 74 2>;
+		power-domains = <&k3_pds 74 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 75 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 75 1>;
+		assigned-clock-parents = <&k3_clks 75 2>;
+		power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 76 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 76 1>;
+		assigned-clock-parents = <&k3_clks 76 2>;
+		power-domains = <&k3_pds 76 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 77 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 77 1>;
+		assigned-clock-parents = <&k3_clks 77 2>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 78 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 78 1>;
+		assigned-clock-parents = <&k3_clks 78 2>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 79 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 79 1>;
+		assigned-clock-parents = <&k3_clks 79 2>;
+		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 80 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 80 1>;
+		assigned-clock-parents = <&k3_clks 80 2>;
+		power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 81 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 81 1>;
+		assigned-clock-parents = <&k3_clks 81 2>;
+		power-domains = <&k3_pds 81 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 82 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 82 1>;
+		assigned-clock-parents = <&k3_clks 82 2>;
+		power-domains = <&k3_pds 82 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x200>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 146 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x200>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 350 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 350 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x200>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 351 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 351 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x200>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 352 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 352 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x200>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 353 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 353 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x200>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 354 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 354 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x200>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 355 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 355 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x200>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 356 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 356 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x200>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 357 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 357 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x200>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 358 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 358 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>, <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 111 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>, <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 112 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>, <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 113 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>, <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 214 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 214 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 215 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 216 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 216 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 217 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 218 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 219 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 219 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 220 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 220 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x1000>,
+		      <0x00 0x04f88000 0x00 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 98 7>, <&k3_clks 98 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 98 1>;
+		assigned-clock-parents = <&k3_clks 98 2>;
+		bus-width = <8>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x1000>,
+		      <0x00 0x04fb8000 0x00 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 99 8>, <&k3_clks 99 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 99 1>;
+		assigned-clock-parents = <&k3_clks 99 2>;
+		bus-width = <4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		/* Masking support for SDR104 capability */
+		sdhci-caps-mask = <0x00000003 0x00000000>;
+		status = "disabled";
+	};
+
+	main_navss: bus@30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <224>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <227>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <265>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: spinlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster0: mailbox@31f90000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f90000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster1: mailbox@31f91000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f91000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster2: mailbox@31f92000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f92000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster3: mailbox@31f93000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f93000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster4: mailbox@31f94000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f94000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster5: mailbox@31f95000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f95000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster6: mailbox@31f96000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f96000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster7: mailbox@31f97000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f97000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster8: mailbox@31f98000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f98000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster9: mailbox@31f99000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f99000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster10: mailbox@31f9a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster11: mailbox@31f9b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x3c000000 0x0 0x400000>,
+			      <0x0 0x38000000 0x0 0x400000>,
+			      <0x0 0x31120000 0x0 0x100>,
+			      <0x0 0x33000000 0x0 0x40000>,
+			      <0x0 0x31080000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <259>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x0 0x31150000 0x0 0x100>,
+			      <0x0 0x34000000 0x0 0x80000>,
+			      <0x0 0x35000000 0x0 0x200000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <263>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x0 0x310d0000 0x0 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 226 5>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 226 5>; /* NAVSS0_CPTS_0_RCLK */
+			assigned-clock-parents = <&k3_clks 226 7>; /* MAIN_0_HSDIVOUT6_CLK */
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_cpsw: ethernet@c200000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		reg = <0x00 0xc200000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0xc200000 0x0 0x200000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-coherent;
+		clocks = <&k3_clks 28 28>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xc640>,
+		       <&main_udmap 0xc641>,
+		       <&main_udmap 0xc642>,
+		       <&main_udmap 0xc643>,
+		       <&main_udmap 0xc644>,
+		       <&main_udmap 0xc645>,
+		       <&main_udmap 0xc646>,
+		       <&main_udmap 0xc647>,
+		       <&main_udmap 0x4640>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				phys = <&phy_gmii_sel_cpsw 1>;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 28 28>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 28 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	usbss0: cdns-usb@4104000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x04104000 0x00 0x100>;
+		clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 360 17>;
+		power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+
+		status = "disabled"; /* Needs pinmux */
+
+		usb0: usb@6000000 {
+			compatible = "cdns,usb3";
+			reg = <0x00 0x06000000 0x00 0x10000>,
+			      <0x00 0x06010000 0x00 0x10000>,
+			      <0x00 0x06020000 0x00 0x10000>;
+			reg-names = "otg", "xhci", "dev";
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host", "peripheral", "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
+
+	serdes_wiz0: wiz@5060000 {
+		compatible = "ti,j721s2-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <4>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+		assigned-clocks = <&k3_clks 365 3>;
+		assigned-clock-parents = <&k3_clks 365 7>;
+
+		serdes0: serdes@5060000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x05060000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 365 3>,
+						 <&k3_clks 365 3>,
+						 <&k3_clks 365 3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			status = "disabled"; /* Needs lane config */
+		};
+	};
+
+	pcie1_rc: pcie@2910000 {
+		compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x800000>,
+		      <0x00 0x18000000 0x00 0x1000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		device_type = "pci";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+		max-link-speed = <3>;
+		num-lanes = <4>;
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 276 41>;
+		clock-names = "fck";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x0 0xff>;
+		vendor-id = <0x104c>;
+		device-id = <0xb013>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+		dma-coherent;
+		ranges = <0x01000000 0x0 0x18001000  0x00 0x18001000  0x0 0x0010000>,
+			 <0x02000000 0x0 0x18011000  0x00 0x18011000  0x0 0x7fef000>;
+		dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */
+				<0 0 0 2 &pcie1_intc 0>, /* INT B */
+				<0 0 0 3 &pcie1_intc 0>, /* INT C */
+				<0 0 0 4 &pcie1_intc 0>; /* INT D */
+
+		status = "disabled"; /* Needs gpio and serdes info */
+
+		pcie1_intc: interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic500>;
+			interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 182 0>, <&k3_clks 182 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 183 0>, <&k3_clks 183 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 184 0>, <&k3_clks 184 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 185 0>, <&k3_clks 185 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 186 0>, <&k3_clks 186 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 187 0>, <&k3_clks 187 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 188 0>, <&k3_clks 188 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 189 0>, <&k3_clks 189 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 190 0>, <&k3_clks 190 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 191 0>, <&k3_clks 191 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 192 0>, <&k3_clks 192 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 193 0>, <&k3_clks 193 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 194 0>, <&k3_clks 194 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 195 0>, <&k3_clks 195 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 197 0>, <&k3_clks 197 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 199 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 199 0>, <&k3_clks 199 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 201 0>, <&k3_clks 201 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 206 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 206 0>, <&k3_clks 206 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 339 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 340 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 341 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 342 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 343 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 344 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 345 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 346 1>;
+		status = "disabled";
+	};
+
+	dss: dss@4a00000 {
+		compatible = "ti,j721e-dss";
+		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
+		      <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
+		      <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
+		      <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
+		      <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
+		      <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
+		      <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
+		      <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
+		      <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
+		      <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
+		      <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
+		      <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
+		      <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
+		      <0x00 0x04aa0000 0x00 0x10000>, /* vp2 */
+		      <0x00 0x04ac0000 0x00 0x10000>, /* vp3 */
+		      <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
+		      <0x00 0x04af0000 0x00 0x10000>; /* wb */
+		reg-names = "common_m", "common_s0",
+			    "common_s1", "common_s2",
+			    "vidl1", "vidl2","vid1","vid2",
+			    "ovr1", "ovr2", "ovr3", "ovr4",
+			    "vp1", "vp2", "vp3", "vp4",
+			    "wb";
+		clocks = <&k3_clks 158 0>,
+			 <&k3_clks 158 2>,
+			 <&k3_clks 158 5>,
+			 <&k3_clks 158 14>,
+			 <&k3_clks 158 18>;
+		clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "common_m",
+				  "common_s0",
+				  "common_s1",
+				  "common_s2";
+		status = "disabled";
+
+		dss_ports: ports {
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
new file mode 100644
index 000000000..2ddad9318
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -0,0 +1,658 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	sms: system-controller@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x034>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x02C>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@4301c190 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c190 0x00 0x004>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04200 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04280 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <125>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+
+	};
+
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 1>;
+		assigned-clock-parents = <&k3_clks 35 2>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 83 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 83 1>;
+		assigned-clock-parents = <&k3_clks 83 2>;
+		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 84 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 84 1>;
+		assigned-clock-parents = <&k3_clks 84 2>;
+		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 85 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 85 1>;
+		assigned-clock-parents = <&k3_clks 85 2>;
+		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer4: timer@40440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 86 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 86 1>;
+		assigned-clock-parents = <&k3_clks 86 2>;
+		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer5: timer@40450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 87 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 87 1>;
+		assigned-clock-parents = <&k3_clks 87 2>;
+		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer6: timer@40460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 88 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 88 1>;
+		assigned-clock-parents = <&k3_clks 88 2>;
+		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer7: timer@40470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 89 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 89 1>;
+		assigned-clock-parents = <&k3_clks 89 2>;
+		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer8: timer@40480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 90 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 90 1>;
+		assigned-clock-parents = <&k3_clks 90 2>;
+		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer9: timer@40490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 91 1>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 91 1>;
+		assigned-clock-parents = <&k3_clks 91 2>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x200>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 359 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x200>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 149 3>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 115 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 116 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 223 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 221 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 222 1>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 207 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 207 0>, <&k3_clks 207 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 208 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 208 0>, <&k3_clks 208 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 347 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 348 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 349 0>;
+		status = "disabled";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <267>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x0 0x2b800000 0x0 0x400000>,
+			      <0x0 0x2b000000 0x0 0x400000>,
+			      <0x0 0x28590000 0x0 0x100>,
+			      <0x0 0x2a500000 0x0 0x40000>,
+			      <0x0 0x28440000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <272>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x0 0x285c0000 0x0 0x100>,
+			      <0x0 0x2a800000 0x0 0x40000>,
+			      <0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <273>;
+			ti,ringacc = <&mcu_ringacc>;
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x2a480000 0x00 0x80000>,
+		      <0x00 0x2a380000 0x00 0x80000>,
+		      <0x00 0x2a400000 0x00 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 29 28>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 29 28>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&k3_clks 29 3>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40210000 0x00 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47040000 0x00 0x100>,
+			      <0x05 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 109 5>;
+			assigned-clocks = <&k3_clks 109 5>;
+			assigned-clock-parents = <&k3_clks 109 7>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled"; /* Needs pinmux */
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47050000 0x00 0x100>,
+			      <0x07 0x00000000 0x01 0x00000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 110 5>;
+			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled"; /* Needs pinmux */
+		};
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x0 0x350>,
+		      <0x00 0x42050000 0x0 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		#thermal-sensor-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
new file mode 100644
index 000000000..a4006f328
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SoM: https://www.ti.com/lit/zip/sprr439
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	/* Reserving memory regions still pending */
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+
+	mux0: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	mux1: mux-controller {
+		compatible = "gpio-mux";
+		#mux-state-cells = <1>;
+		mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	transceiver0: can-phy0 {
+		/* standby pin has been grounded by default */
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+};
+
+&wkup_pmx0 {
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+			J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+			J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+			J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+			J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+			J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+			J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+			J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+			J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+			J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+			J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+			J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */
+			J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */
+		>;
+	};
+
+	main_mcan16_pins_default: main-mcan16-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */
+			J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */
+		>;
+	};
+};
+
+&wkup_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp_som: gpio@21 {
+		compatible = "ti,tca6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
+				  "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
+				  "GPIO_RGMII1_RST", "GPIO_eDP_ENABLE",
+				   "GPIO_LIN_EN", "CAN_STB";
+	};
+};
+
+&main_mcan16 {
+	status = "okay";
+	pinctrl-0 = <&main_mcan16_pins_default>;
+	pinctrl-names = "default";
+	phys = <&transceiver0>;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi
new file mode 100644
index 000000000..f7b1a15b8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+wkup0_thermal: wkup0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		wkup0_crit: wkup0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+wkup1_thermal: wkup1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		wkup1_crit: wkup1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main0_thermal: main0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		main0_crit: main0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main1_thermal: main1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 3>;
+
+	trips {
+		main1_crit: main1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main2_thermal: main2-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 4>;
+
+	trips {
+		main2_crit: main2-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main3_thermal: main3-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 5>;
+
+	trips {
+		main3_crit: main3-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main4_thermal: main4-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 6>;
+
+	trips {
+		main4_crit: main4-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
new file mode 100644
index 000000000..1f636acd4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721S2 SoC Family
+ *
+ * TRM (SPRUJ28 NOVEMBER 2021): https://www.ti.com/lit/pdf/spruj28
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+
+	model = "Texas Instruments K3 J721S2 SoC";
+	compatible = "ti,j721s2";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x0d800000 0x00 0x0d800000 0x00 0x00800000>, /* PCIe Core*/
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+
+		};
+
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j721s2-thermal.dtsi"
+	};
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j721s2-main.dtsi"
+#include "k3-j721s2-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
new file mode 100644
index 000000000..5991c2e1d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j784s4.dtsi"
+
+/ {
+	compatible = "ti,j784s4-evm", "ti,j784s4";
+	model = "Texas Instruments J784S4 EVM";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		i2c0 = &wkup_i2c0;
+		i2c3 = &main_i2c0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 32G RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x07 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa0100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1000000 0x00 0x100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa1100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa2100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa3100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa4100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa5100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa6100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7000000 0x00 0x100000>;
+			no-map;
+		};
+
+		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa7100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_0_memory_region: c71-memory@a8100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa8100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_1_memory_region: c71-memory@a9100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xa9100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_2_memory_region: c71-memory@aa100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xaa100000 0x00 0xf00000>;
+			no-map;
+		};
+
+		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab000000 0x00 0x100000>;
+			no-map;
+		};
+
+		c71_3_memory_region: c71-memory@ab100000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0xab100000 0x00 0xf00000>;
+			no-map;
+		};
+	};
+
+	evm_12v0: regulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: regulator-vsys3v3 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: regulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_mmc1: regulator-sd {
+		/* Output of TPS22918 */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vsys_3v3>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vdd_sd_dv: regulator-TLV71033 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vsys_5v0>;
+		gpios = <&main_gpio0 8 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+	};
+};
+
+&main_pmx0 {
+	bootph-all;
+	main_uart8_pins_default: main-uart8-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x040, PIN_INPUT, 14) /* (AF37) MCASP0_AXR0.UART8_CTSn */
+			J784S4_IOPAD(0x044, PIN_OUTPUT, 14) /* (AG37) MCASP0_AXR1.UART8_RTSn */
+			J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */
+			J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */
+			J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */
+		>;
+	};
+
+	main_mmc1_pins_default: main-mmc1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */
+			J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */
+			J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */
+			J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */
+			J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */
+			J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */
+			J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */
+			J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x020, PIN_INPUT, 7) /* (AJ35) MCAN15_RX.GPIO0_8 */
+		>;
+	};
+};
+
+&wkup_pmx2 {
+	bootph-all;
+	wkup_uart0_pins_default: wkup-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (L37) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+			J721S2_WKUP_IOPAD(0x074, PIN_INPUT, 0) /* (L36) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu-uart0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (H37) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J784S4_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (K37) WKUP_GPIO0_15.MCU_UART0_RTSn */
+			J784S4_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (K38) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (J37) WKUP_GPIO0_12.MCU_UART0_TXD */
+		>;
+	};
+
+	mcu_cpsw_pins_default: mcu-cpsw-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (A35) MCU_RGMII1_RD0 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B36) MCU_RGMII1_RD1 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C36) MCU_RGMII1_RD2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D36) MCU_RGMII1_RD3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (B37) MCU_RGMII1_RXC */
+			J784S4_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (C37) MCU_RGMII1_RX_CTL */
+			J784S4_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (D37) MCU_RGMII1_TD0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (D38) MCU_RGMII1_TD1 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E37) MCU_RGMII1_TD2 */
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E38) MCU_RGMII1_TD3 */
+			J784S4_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (E36) MCU_RGMII1_TXC */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (C38) MCU_RGMII1_TX_CTL */
+		>;
+	};
+
+	mcu_mdio_pins_default: mcu-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A36) MCU_MDIO0_MDC */
+			J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
+		>;
+	};
+
+	mcu_adc0_pins_default: mcu-adc0-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
+			J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
+			J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
+			J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
+			J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
+			J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
+			J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
+			J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
+		>;
+	};
+
+	mcu_adc1_pins_default: mcu-adc1-default-pins {
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
+			J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
+			J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
+			J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
+			J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
+			J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
+			J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
+			J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
+		>;
+	};
+};
+
+&wkup_pmx0 {
+	bootph-all;
+	mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (E32) MCU_OSPI0_CLK */
+			J784S4_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (A32) MCU_OSPI0_CSn0 */
+			J784S4_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (B33) MCU_OSPI0_D0 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (B32) MCU_OSPI0_D1 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (C33) MCU_OSPI0_D2 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (C35) MCU_OSPI0_D3 */
+			J784S4_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D33) MCU_OSPI0_D4 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D34) MCU_OSPI0_D5 */
+			J784S4_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (E34) MCU_OSPI0_D6 */
+			J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (E33) MCU_OSPI0_D7 */
+			J784S4_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (C34) MCU_OSPI0_DQS */
+		>;
+	};
+};
+
+&wkup_pmx1 {
+	bootph-all;
+	mcu_fss0_ospi0_1_pins_default: mcu-fss0-ospi0-1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x004, PIN_OUTPUT, 6) /* (C32) MCU_OSPI0_ECC_FAIL */
+			J784S4_WKUP_IOPAD(0x000, PIN_OUTPUT, 6) /* (B34) MCU_OSPI0_RESET_OUT0 */
+		>;
+	};
+
+	mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			J784S4_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (F32) MCU_OSPI1_CLK */
+			J784S4_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (G32) MCU_OSPI1_CSn0 */
+			J784S4_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (E35) MCU_OSPI1_D0 */
+			J784S4_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (D31) MCU_OSPI1_D1 */
+			J784S4_WKUP_IOPAD(0x01C, PIN_INPUT, 0) /* (G31) MCU_OSPI1_D2 */
+			J784S4_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (F33) MCU_OSPI1_D3 */
+			J784S4_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F31) MCU_OSPI1_DQS */
+			J784S4_WKUP_IOPAD(0x00C, PIN_INPUT, 0) /* (C31) MCU_OSPI1_LBCLKO */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Firmware usage */
+	status = "reserved";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&wkup_i2c0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		/* CAV24C256WE-GT3 */
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&mcu_uart0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+};
+
+&main_uart8 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart8_pins_default>;
+};
+
+&ufs_wrapper {
+	status = "okay";
+};
+
+&fss {
+	bootph-all;
+	status = "okay";
+};
+
+&ospi0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
+
+	flash@0 {
+		bootph-all;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-all;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
+
+&ospi1 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+	flash@0 {
+		bootph-all;
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "qspi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "qspi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "qspi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "qspi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "qspi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "qspi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-all;
+				label = "qspi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+
+	};
+};
+
+&main_i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+
+	clock-frequency = <400000>;
+
+	exp1: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "PCIE1_2L_MODE_SEL", "PCIE1_4L_PERSTZ", "PCIE1_2L_RC_RSTZ",
+				  "PCIE1_2L_EP_RST_EN", "PCIE0_4L_MODE_SEL", "PCIE0_4L_PERSTZ",
+				  "PCIE0_4L_RC_RSTZ", "PCIE0_4L_EP_RST_EN", "PCIE1_4L_PRSNT#",
+				  "PCIE0_4L_PRSNT#", "CDCI1_OE1/OE4", "CDCI1_OE2/OE3",
+				  "AUDIO_MUX_SEL", "EXP_MUX2", "EXP_MUX3", "GESI_EXP_PHY_RSTZ";
+	};
+
+	exp2: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "R_GPIO_RGMII1_RST", "ENET2_I2CMUX_SEL", "GPIO_USD_PWR_EN",
+				  "USBC_PWR_EN", "USBC_MODE_SEL1", "USBC_MODE_SEL0",
+				  "GPIO_LIN_EN", "R_CAN_STB", "CTRL_PM_I2C_OE#",
+				  "ENET2_EXP_PWRDN", "ENET2_EXP_SPARE2", "CDCI2_RSTZ",
+				  "USB2.0_MUX_SEL", "CANUART_MUX_SEL0", "CANUART_MUX2_SEL1",
+				  "CANUART_MUX1_SEL1", "ENET1_EXP_PWRDN", "ENET1_EXP_RESETZ",
+				  "ENET1_I2CMUX_SEL", "ENET1_EXP_SPARE2", "ENET2_EXP_RESETZ",
+				  "USER_INPUT1", "USER_LED1", "USER_LED2";
+	};
+};
+
+&main_sdhci0 {
+	bootph-all;
+	/* eMMC */
+	status = "okay";
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	bootph-all;
+	/* SD card */
+	status = "okay";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	pinctrl-names = "default";
+	disable-wp;
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&main_gpio0 {
+	status = "okay";
+};
+
+&mcu_cpsw {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_cpsw_pins_default>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_mdio_pins_default>;
+
+	mcu_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&mcu_cpsw_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&mcu_phy0>;
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+	memory-region = <&main_r5fss2_core0_dma_memory_region>,
+			<&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+	memory-region = <&main_r5fss2_core1_dma_memory_region>,
+			<&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
+
+&c71_3 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+};
+
+&tscadc0 {
+	pinctrl-0 = <&mcu_adc0_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&tscadc1 {
+	pinctrl-0 = <&mcu_adc1_pins_default>;
+	pinctrl-names = "default";
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
new file mode 100644
index 000000000..efed2d683
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -0,0 +1,1571 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x70000000 0x00 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x00 0x20000>;
+		};
+
+		tifs-sram@1f0000 {
+			reg = <0x1f0000 0x10000>;
+		};
+
+		l3cache-sram@200000 {
+			reg = <0x200000 0x200000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <10>;
+		ti,interrupt-ranges = <8 392 56>;
+	};
+
+	main_pmx0: pinctrl@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x11c000 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+	main_timerio_input: pinctrl@104200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104200 0x00 0x50>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000007>;
+	};
+
+	/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+	main_timerio_output: pinctrl@104280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x104280 0x00 0x20>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000001f>;
+	};
+
+	main_crypto: crypto@4e00000 {
+		compatible = "ti,j721e-sa2ul";
+		reg = <0x00 0x4e00000 0x00 0x1200>;
+		power-domains = <&k3_pds 369 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x04e00000 0x00 0x04e00000 0x00 0x30000>;
+
+		dmas = <&main_udmap 0xca40>, <&main_udmap 0x4a40>,
+				<&main_udmap 0x4a41>;
+		dma-names = "tx", "rx1", "rx2";
+
+		rng: rng@4e10000 {
+			compatible = "inside-secure,safexcel-eip76";
+			reg = <0x00 0x4e10000 0x00 0x7d>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_timer0: timer@2400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2400000 0x00 0x400>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 97 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 97 2>;
+		assigned-clock-parents = <&k3_clks 97 3>;
+		power-domains = <&k3_pds 97 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer1: timer@2410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2410000 0x00 0x400>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 98 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 98 2>;
+		assigned-clock-parents = <&k3_clks 98 3>;
+		power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer2: timer@2420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2420000 0x00 0x400>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 99 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 99 2>;
+		assigned-clock-parents = <&k3_clks 99 3>;
+		power-domains = <&k3_pds 99 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer3: timer@2430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2430000 0x00 0x400>;
+		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 100 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 100 2>;
+		assigned-clock-parents = <&k3_clks 100 3>;
+		power-domains = <&k3_pds 100 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer4: timer@2440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2440000 0x00 0x400>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 101 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 101 2>;
+		assigned-clock-parents = <&k3_clks 101 3>;
+		power-domains = <&k3_pds 101 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer5: timer@2450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2450000 0x00 0x400>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 102 2>;
+		assigned-clock-parents = <&k3_clks 102 3>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer6: timer@2460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2460000 0x00 0x400>;
+		interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 103 2>;
+		assigned-clock-parents = <&k3_clks 103 3>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer7: timer@2470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2470000 0x00 0x400>;
+		interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 104 2>;
+		assigned-clock-parents = <&k3_clks 104 3>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer8: timer@2480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2480000 0x00 0x400>;
+		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 105 2>;
+		assigned-clock-parents = <&k3_clks 105 3>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer9: timer@2490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2490000 0x00 0x400>;
+		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 106 2>;
+		assigned-clock-parents = <&k3_clks 106 3>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer10: timer@24a0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24a0000 0x00 0x400>;
+		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 107 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 107 2>;
+		assigned-clock-parents = <&k3_clks 107 3>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer11: timer@24b0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24b0000 0x00 0x400>;
+		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 108 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 108 2>;
+		assigned-clock-parents = <&k3_clks 108 3>;
+		power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer12: timer@24c0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24c0000 0x00 0x400>;
+		interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 109 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 109 2>;
+		assigned-clock-parents = <&k3_clks 109 3>;
+		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer13: timer@24d0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24d0000 0x00 0x400>;
+		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 110 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 110 2>;
+		assigned-clock-parents = <&k3_clks 110 3>;
+		power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer14: timer@24e0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24e0000 0x00 0x400>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 111 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 111 2>;
+		assigned-clock-parents = <&k3_clks 111 3>;
+		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer15: timer@24f0000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x24f0000 0x00 0x400>;
+		interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 112 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 112 2>;
+		assigned-clock-parents = <&k3_clks 112 3>;
+		power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer16: timer@2500000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2500000 0x00 0x400>;
+		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 113 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 113 2>;
+		assigned-clock-parents = <&k3_clks 113 3>;
+		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer17: timer@2510000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2510000 0x00 0x400>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 114 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 114 2>;
+		assigned-clock-parents = <&k3_clks 114 3>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer18: timer@2520000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2520000 0x00 0x400>;
+		interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 115 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 115 2>;
+		assigned-clock-parents = <&k3_clks 115 3>;
+		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_timer19: timer@2530000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x2530000 0x00 0x400>;
+		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 116 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 116 2>;
+		assigned-clock-parents = <&k3_clks 116 3>;
+		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x200>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x200>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 388 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 388 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x200>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 389 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 389 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x200>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 390 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 390 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x200>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 391 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 391 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x200>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 392 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 392 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x200>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 393 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 393 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x200>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 394 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 394 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x200>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 395 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 395 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x200>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 396 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 396 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00600000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <145>, <146>, <147>, <148>, <149>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 163 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio2: gpio@610000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00610000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <154>, <155>, <156>, <157>, <158>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 164 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio4: gpio@620000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00620000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <163>, <164>, <165>, <166>, <167>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 165 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_gpio6: gpio@630000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x00630000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <172>, <173>, <174>, <175>, <176>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <66>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 166 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 166 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	main_i2c0: i2c@2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02000000 0x00 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 270 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c1: i2c@2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02010000 0x00 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 271 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c2: i2c@2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02020000 0x00 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 272 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c3: i2c@2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02030000 0x00 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 273 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c4: i2c@2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02040000 0x00 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 274 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c5: i2c@2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02050000 0x00 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 275 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_i2c6: i2c@2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02060000 0x00 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 276 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	main_sdhci0: mmc@4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x00 0x04f80000 0x00 0x1000>,
+		      <0x00 0x04f88000 0x00 0x400>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 140 1>, <&k3_clks 140 2>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 140 2>;
+		assigned-clock-parents = <&k3_clks 140 3>;
+		bus-width = <8>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,strobe-sel = <0x77>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		dma-coherent;
+		status = "disabled";
+	};
+
+	main_sdhci1: mmc@4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x00 0x04fb0000 0x00 0x1000>,
+		      <0x00 0x04fb8000 0x00 0x400>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 141 3>, <&k3_clks 141 4>;
+		clock-names = "clk_ahb", "clk_xin";
+		assigned-clocks = <&k3_clks 141 4>;
+		assigned-clock-parents = <&k3_clks 141 5>;
+		bus-width = <4>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,clkbuf-sel = <0x7>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+		sdhci-caps-mask = <0x00000003 0x00000000>;
+		no-1-8-v;
+		status = "disabled";
+	};
+
+	main_navss: bus@30000000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+		ti,sci-dev-id = <280>;
+		dma-coherent;
+		dma-ranges;
+
+		main_navss_intr: interrupt-controller@310e0000 {
+			compatible = "ti,sci-intr";
+			reg = <0x00 0x310e0000 0x00 0x4000>;
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <283>;
+			ti,interrupt-ranges = <0 64 64>,
+					      <64 448 64>,
+					      <128 672 64>;
+		};
+
+		main_udmass_inta: msi-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x00 0x33d00000 0x00 0x100000>;
+			interrupt-controller;
+			#interrupt-cells = <0>;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <321>;
+			ti,interrupt-ranges = <0 0 256>;
+		};
+
+		secure_proxy_main: mailbox@32c00000 {
+			bootph-all;
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hwspinlock: hwlock@30e00000 {
+			compatible = "ti,am654-hwspinlock";
+			reg = <0x00 0x30e00000 0x00 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		mailbox0_cluster0: mailbox@31f80000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f80000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster1: mailbox@31f81000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f81000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster2: mailbox@31f82000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f82000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster3: mailbox@31f83000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f83000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster4: mailbox@31f84000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f84000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster5: mailbox@31f85000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f85000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster6: mailbox@31f86000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f86000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster7: mailbox@31f87000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f87000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster8: mailbox@31f88000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f88000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster9: mailbox@31f89000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f89000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster10: mailbox@31f8a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox0_cluster11: mailbox@31f8b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f8b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster0: mailbox@31f90000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f90000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster1: mailbox@31f91000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f91000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster2: mailbox@31f92000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f92000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster3: mailbox@31f93000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f93000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster4: mailbox@31f94000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f94000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster5: mailbox@31f95000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f95000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster6: mailbox@31f96000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f96000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster7: mailbox@31f97000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f97000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster8: mailbox@31f98000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f98000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster9: mailbox@31f99000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f99000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster10: mailbox@31f9a000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9a000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		mailbox1_cluster11: mailbox@31f9b000 {
+			compatible = "ti,am654-mailbox";
+			reg = <0x00 0x31f9b000 0x00 0x200>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <16>;
+			interrupt-parent = <&main_navss_intr>;
+			status = "disabled";
+		};
+
+		main_ringacc: ringacc@3c000000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x3c000000 0x00 0x400000>,
+			      <0x00 0x38000000 0x00 0x400000>,
+			      <0x00 0x31120000 0x00 0x100>,
+			      <0x00 0x33000000 0x00 0x40000>,
+			      <0x00 0x31080000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <1024>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <315>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		main_udmap: dma-controller@31150000 {
+			compatible = "ti,j721e-navss-main-udmap";
+			reg = <0x00 0x31150000 0x00 0x100>,
+			      <0x00 0x34000000 0x00 0x80000>,
+			      <0x00 0x35000000 0x00 0x200000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <319>;
+			ti,ringacc = <&main_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>, /* TX_HCHAN */
+						<0x10>; /* TX_UHCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>, /* RX_HCHAN */
+						<0x0c>; /* RX_UHCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+
+		cpts@310d0000 {
+			compatible = "ti,j721e-cpts";
+			reg = <0x00 0x310d0000 0x00 0x400>;
+			reg-names = "cpts";
+			clocks = <&k3_clks 282 0>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 62 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 62 5>; /* MAIN_0_HSDIV6_CLK */
+			interrupts-extended = <&main_navss_intr 391>;
+			interrupt-names = "cpts";
+			ti,cpts-periodic-outputs = <6>;
+			ti,cpts-ext-ts-inputs = <8>;
+		};
+	};
+
+	main_mcan0: can@2701000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02701000 0x00 0x200>,
+		      <0x00 0x02708000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 245 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 245 6>, <&k3_clks 245 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan1: can@2711000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02711000 0x00 0x200>,
+		      <0x00 0x02718000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 246 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 246 6>, <&k3_clks 246 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan2: can@2721000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02721000 0x00 0x200>,
+		      <0x00 0x02728000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 247 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 247 6>, <&k3_clks 247 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan3: can@2731000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02731000 0x00 0x200>,
+		      <0x00 0x02738000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 248 6>, <&k3_clks 248 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan4: can@2741000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02741000 0x00 0x200>,
+		      <0x00 0x02748000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 249 6>, <&k3_clks 249 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan5: can@2751000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02751000 0x00 0x200>,
+		      <0x00 0x02758000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 250 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 250 6>, <&k3_clks 250 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan6: can@2761000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02761000 0x00 0x200>,
+		      <0x00 0x02768000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 251 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 251 6>, <&k3_clks 251 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan7: can@2771000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02771000 0x00 0x200>,
+		      <0x00 0x02778000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 252 6>, <&k3_clks 252 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan8: can@2781000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02781000 0x00 0x200>,
+		      <0x00 0x02788000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 253 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 253 6>, <&k3_clks 253 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan9: can@2791000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02791000 0x00 0x200>,
+		      <0x00 0x02798000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 254 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 254 6>, <&k3_clks 254 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan10: can@27a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027a1000 0x00 0x200>,
+		      <0x00 0x027a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 255 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 255 6>, <&k3_clks 255 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan11: can@27b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027b1000 0x00 0x200>,
+		      <0x00 0x027b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 256 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 256 6>, <&k3_clks 256 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan12: can@27c1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027c1000 0x00 0x200>,
+		      <0x00 0x027c8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 257 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 257 6>, <&k3_clks 257 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan13: can@27d1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x027d1000 0x00 0x200>,
+		      <0x00 0x027d8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 258 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 258 6>, <&k3_clks 258 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan14: can@2681000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02681000 0x00 0x200>,
+		      <0x00 0x02688000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 259 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 259 6>, <&k3_clks 259 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan15: can@2691000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x02691000 0x00 0x200>,
+		      <0x00 0x02698000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 260 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 260 6>, <&k3_clks 260 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan16: can@26a1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026a1000 0x00 0x200>,
+		      <0x00 0x026a8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 261 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 261 6>, <&k3_clks 261 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_mcan17: can@26b1000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x026b1000 0x00 0x200>,
+		      <0x00 0x026b8000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 262 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 262 6>, <&k3_clks 262 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	main_spi0: spi@2100000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02100000 0x00 0x400>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 376 1>;
+		status = "disabled";
+	};
+
+	main_spi1: spi@2110000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02110000 0x00 0x400>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 377 1>;
+		status = "disabled";
+	};
+
+	main_spi2: spi@2120000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02120000 0x00 0x400>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 378 1>;
+		status = "disabled";
+	};
+
+	main_spi3: spi@2130000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02130000 0x00 0x400>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 379 1>;
+		status = "disabled";
+	};
+
+	main_spi4: spi@2140000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02140000 0x00 0x400>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 380 1>;
+		status = "disabled";
+	};
+
+	main_spi5: spi@2150000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02150000 0x00 0x400>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 381 1>;
+		status = "disabled";
+	};
+
+	main_spi6: spi@2160000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02160000 0x00 0x400>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 382 1>;
+		status = "disabled";
+	};
+
+	main_spi7: spi@2170000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x00 0x02170000 0x00 0x400>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 383 1>;
+		status = "disabled";
+	};
+
+	ufs_wrapper: ufs-wrapper@4e80000 {
+		compatible = "ti,j721e-ufs";
+		reg = <0x00 0x4e80000 0x00 0x100>;
+		power-domains = <&k3_pds 387 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 387 3>;
+		assigned-clocks = <&k3_clks 387 3>;
+		assigned-clock-parents = <&k3_clks 387 6>;
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		status = "disabled";
+
+		ufs@4e84000 {
+			compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
+			reg = <0x00 0x4e84000 0x00 0x10000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			freq-table-hz = <250000000 250000000>, <19200000 19200000>,
+					<19200000 19200000>;
+			clocks = <&k3_clks 387 1>, <&k3_clks 387 3>, <&k3_clks 387 3>;
+			clock-names = "core_clk", "phy_clk", "ref_clk";
+			dma-coherent;
+		};
+	};
+
+	main_r5fss0: r5fss@5c00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
+			 <0x5d00000 0x00 0x5d00000 0x20000>;
+		power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss0_core0: r5f@5c00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5c00000 0x00010000>,
+			      <0x5c10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <339>;
+			ti,sci-proc-ids = <0x06 0xff>;
+			resets = <&k3_reset 339 1>;
+			firmware-name = "j784s4-main-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss0_core1: r5f@5d00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5d00000 0x00010000>,
+			      <0x5d10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <340>;
+			ti,sci-proc-ids = <0x07 0xff>;
+			resets = <&k3_reset 340 1>;
+			firmware-name = "j784s4-main-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss1: r5fss@5e00000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
+			 <0x5f00000 0x00 0x5f00000 0x20000>;
+		power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss1_core0: r5f@5e00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5e00000 0x00010000>,
+			      <0x5e10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <341>;
+			ti,sci-proc-ids = <0x08 0xff>;
+			resets = <&k3_reset 341 1>;
+			firmware-name = "j784s4-main-r5f1_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss1_core1: r5f@5f00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5f00000 0x00010000>,
+			      <0x5f10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <342>;
+			ti,sci-proc-ids = <0x09 0xff>;
+			resets = <&k3_reset 342 1>;
+			firmware-name = "j784s4-main-r5f1_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	main_r5fss2: r5fss@5900000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x5900000 0x00 0x5900000 0x20000>,
+			 <0x5a00000 0x00 0x5a00000 0x20000>;
+		power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+
+		main_r5fss2_core0: r5f@5900000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5900000 0x00010000>,
+			      <0x5910000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <343>;
+			ti,sci-proc-ids = <0x0a 0xff>;
+			resets = <&k3_reset 343 1>;
+			firmware-name = "j784s4-main-r5f2_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		main_r5fss2_core1: r5f@5a00000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x5a00000 0x00010000>,
+			      <0x5a10000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <344>;
+			ti,sci-proc-ids = <0x0b 0xff>;
+			resets = <&k3_reset 344 1>;
+			firmware-name = "j784s4-main-r5f2_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	c71_0: dsp@64800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x64800000 0x00 0x00080000>,
+		      <0x00 0x64e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <30>;
+		ti,sci-proc-ids = <0x30 0xff>;
+		resets = <&k3_reset 30 1>;
+		firmware-name = "j784s4-c71_0-fw";
+		status = "disabled";
+	};
+
+	c71_1: dsp@65800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x65800000 0x00 0x00080000>,
+		      <0x00 0x65e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <33>;
+		ti,sci-proc-ids = <0x31 0xff>;
+		resets = <&k3_reset 33 1>;
+		firmware-name = "j784s4-c71_1-fw";
+		status = "disabled";
+	};
+
+	c71_2: dsp@66800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x66800000 0x00 0x00080000>,
+		      <0x00 0x66e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <37>;
+		ti,sci-proc-ids = <0x32 0xff>;
+		resets = <&k3_reset 37 1>;
+		firmware-name = "j784s4-c71_2-fw";
+		status = "disabled";
+	};
+
+	c71_3: dsp@67800000 {
+		compatible = "ti,j721s2-c71-dsp";
+		reg = <0x00 0x67800000 0x00 0x00080000>,
+		      <0x00 0x67e00000 0x00 0x0000c000>;
+		reg-names = "l2sram", "l1dram";
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <40>;
+		ti,sci-proc-ids = <0x33 0xff>;
+		resets = <&k3_reset 40 1>;
+		firmware-name = "j784s4-c71_3-fw";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
new file mode 100644
index 000000000..4ab4018d3
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -0,0 +1,703 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	sms: system-controller@44083000 {
+		bootph-all;
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes = <&secure_proxy_main 11>,
+			 <&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x00 0x1000>;
+
+		k3_pds: power-controller {
+			bootph-all;
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			bootph-all;
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			bootph-all;
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid@43000014 {
+		bootph-all;
+		compatible = "ti,am654-chipid";
+		reg = <0x00 0x43000014 0x00 0x4>;
+	};
+
+	secure_proxy_sa3: mailbox@43600000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x43600000 0x00 0x10000>,
+		      <0x00 0x44880000 0x00 0x20000>,
+		      <0x00 0x44860000 0x00 0x20000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x00 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_pmx0: pinctrl@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x034>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx1: pinctrl@4301c038 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c038 0x00 0x02c>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx2: pinctrl@4301c068 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c068 0x00 0x120>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_pmx3: pinctrl@4301c190 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c190 0x00 0x004>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	wkup_gpio_intr: interrupt-controller@42200000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x42200000 0x00 0x400>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&sms>;
+		ti,sci-dev-id = <177>;
+		ti,interrupt-ranges = <16 960 16>;
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04200 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x40f04280 0x00 0x28>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x0000000f>;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_conf: syscon@40f00000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0x00 0x40f00000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00 0x00 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 35 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 35 2>;
+		assigned-clock-parents = <&k3_clks 35 3>;
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		bootph-all;
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 117 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 117 2>;
+		assigned-clock-parents = <&k3_clks 117 3>;
+		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 118 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 118 2>;
+		assigned-clock-parents = <&k3_clks 118 3>;
+		power-domains = <&k3_pds 118 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 119 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 119 2>;
+		assigned-clock-parents = <&k3_clks 119 3>;
+		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer4: timer@40440000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40440000 0x00 0x400>;
+		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 120 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 120 2>;
+		assigned-clock-parents = <&k3_clks 120 3>;
+		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer5: timer@40450000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40450000 0x00 0x400>;
+		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 121 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 121 2>;
+		assigned-clock-parents = <&k3_clks 121 3>;
+		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer6: timer@40460000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40460000 0x00 0x400>;
+		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 122 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 122 2>;
+		assigned-clock-parents = <&k3_clks 122 3>;
+		power-domains = <&k3_pds 122 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer7: timer@40470000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40470000 0x00 0x400>;
+		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 123 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 123 2>;
+		assigned-clock-parents = <&k3_clks 123 3>;
+		power-domains = <&k3_pds 123 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer8: timer@40480000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40480000 0x00 0x400>;
+		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 124 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 124 2>;
+		assigned-clock-parents = <&k3_clks 124 3>;
+		power-domains = <&k3_pds 124 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	mcu_timer9: timer@40490000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40490000 0x00 0x400>;
+		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 125 2>;
+		clock-names = "fck";
+		assigned-clocks = <&k3_clks 125 2>;
+		assigned-clock-parents = <&k3_clks 125 3>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		/* Non-MPU Firmware usage */
+		status = "reserved";
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x200>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 397 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 397 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x200>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		current-speed = <115200>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	wkup_gpio0: gpio@42110000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42110000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 167 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 167 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_gpio1: gpio@42100000 {
+		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+		reg = <0x00 0x42100000 0x00 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&wkup_gpio_intr>;
+		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <89>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 168 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 168 0>;
+		clock-names = "gpio";
+		status = "disabled";
+	};
+
+	wkup_i2c0: i2c@42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x42120000 0x00 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b00000 0x00 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 277 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_i2c1: i2c@40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x40b10000 0x00 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_mcan0: can@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40528000 0x00 0x200>,
+		      <0x00 0x40500000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 263 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 263 6>, <&k3_clks 263 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_mcan1: can@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x00 0x40568000 0x00 0x200>,
+		      <0x00 0x40540000 0x00 0x8000>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 264 6>, <&k3_clks 264 1>;
+		clock-names = "hclk", "cclk";
+		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040300000 0x00 0x400>;
+		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 384 0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040310000 0x00 0x400>;
+		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 385 0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+		reg = <0x00 0x040320000 0x00 0x400>;
+		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 386 0>;
+		status = "disabled";
+	};
+
+	mcu_navss: bus@28380000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		ti,sci-dev-id = <323>;
+		dma-coherent;
+		dma-ranges;
+
+		mcu_ringacc: ringacc@2b800000 {
+			bootph-all;
+			compatible = "ti,am654-navss-ringacc";
+			reg = <0x00 0x2b800000 0x00 0x400000>,
+			      <0x00 0x2b000000 0x00 0x400000>,
+			      <0x00 0x28590000 0x00 0x100>,
+			      <0x00 0x2a500000 0x00 0x40000>,
+			      <0x00 0x28440000 0x00 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <328>;
+			msi-parent = <&main_udmass_inta>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			bootph-all;
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg = <0x00 0x285c0000 0x00 0x100>,
+			      <0x00 0x2a800000 0x00 0x40000>,
+			      <0x00 0x2aa00000 0x00 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <1>;
+
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <329>;
+			ti,ringacc = <&mcu_ringacc>;
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
+	secure_proxy_mcu: mailbox@2a480000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x2a480000 0x00 0x80000>,
+		      <0x00 0x2a380000 0x00 0x80000>,
+		      <0x00 0x2a400000 0x00 0x80000>;
+		/*
+		 * Marked Disabled:
+		 * Node is incomplete as it is meant for bootloaders and
+		 * firmware on non-MPU processors
+		 */
+		status = "disabled";
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0x46000000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0x46000000 0x00 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 63 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 63 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mcu_cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 63 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 63 3>;
+			clock-names = "cpts";
+			assigned-clocks = <&k3_clks 63 3>; /* CPTS_RFT_CLK */
+			assigned-clock-parents = <&k3_clks 63 5>; /* MAIN_0_HSDIV6_CLK */
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,j721s2-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x41000000 0x00010000>,
+			      <0x41010000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <346>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 346 1>;
+			firmware-name = "j784s4-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,j721s2-r5f";
+			reg = <0x41400000 0x00010000>,
+			      <0x41410000 0x00010000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <347>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 347 1>;
+			firmware-name = "j784s4-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40200000 0x00 0x1000>;
+		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 0 0>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7400>,
+			<&main_udmap 0x7401>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am3359-tscadc";
+		reg = <0x00 0x40210000 0x00 0x1000>;
+		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 1 0>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&main_udmap 0x7402>,
+			<&main_udmap 0x7403>;
+		dma-names = "fifo0", "fifo1";
+		status = "disabled";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am3359-adc";
+		};
+	};
+
+	fss: bus@47000000 {
+		compatible = "simple-bus";
+		reg = <0x00 0x47000000 0x00 0x100>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47040000 0x00 0x100>,
+			      <0x05 0x0000000 0x01 0x0000000>;
+			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 161 7>;
+			assigned-clocks = <&k3_clks 161 7>;
+			assigned-clock-parents = <&k3_clks 161 9>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x00 0x47050000 0x00 0x100>,
+			      <0x07 0x0000000 0x01 0x0000000>;
+			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 162 7>;
+			power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi
new file mode 100644
index 000000000..f7b1a15b8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+wkup0_thermal: wkup0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 0>;
+
+	trips {
+		wkup0_crit: wkup0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+wkup1_thermal: wkup1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 1>;
+
+	trips {
+		wkup1_crit: wkup1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main0_thermal: main0-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 2>;
+
+	trips {
+		main0_crit: main0-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main1_thermal: main1-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 3>;
+
+	trips {
+		main1_crit: main1-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main2_thermal: main2-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 4>;
+
+	trips {
+		main2_crit: main2-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main3_thermal: main3-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 5>;
+
+	trips {
+		main3_crit: main3-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
+
+main4_thermal: main4-thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+	thermal-sensors = <&wkup_vtm0 6>;
+
+	trips {
+		main4_crit: main4-crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
new file mode 100644
index 000000000..4398c3a46
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J784S4 SoC Family
+ *
+ * TRM (SPRUJ43 JULY 2022): https://www.ti.com/lit/zip/spruj52
+ *
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+/ {
+	model = "Texas Instruments K3 J784S4 SoC";
+	compatible = "ti,j784s4";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a72";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a72";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x200000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-unified;
+		cache-size = <0x200000>;
+		cache-line-size = <64>;
+		cache-sets = <1024>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+		cache-unified;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a72-pmu";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@100000 {
+		bootph-all;
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x08000000>, /* PCIe0 DAT0 */
+			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
+			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x66800000 0x00 0x66800000 0x00 0x0070c000>, /* C71_3 */
+			 <0x00 0x67800000 0x00 0x67800000 0x00 0x0070c000>, /* C71_4 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: bus@28380000 {
+			bootph-all;
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		#include "k3-j784s4-thermal.dtsi"
+	};
+};
+
+/* Now include peripherals from each bus segment */
+#include "k3-j784s4-main.dtsi"
+#include "k3-j784s4-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
new file mode 100644
index 000000000..2a4e0e084
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for pinctrl bindings for TI's K3 SoC
+ * family.
+ *
+ * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#ifndef DTS_ARM64_TI_K3_PINCTRL_H
+#define DTS_ARM64_TI_K3_PINCTRL_H
+
+#define PULLUDEN_SHIFT		(16)
+#define PULLTYPESEL_SHIFT	(17)
+#define RXACTIVE_SHIFT		(18)
+#define DEBOUNCE_SHIFT		(11)
+
+#define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
+#define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
+
+#define PULL_UP			(1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+#define PULL_DOWN		(0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
+
+#define INPUT_EN		(1 << RXACTIVE_SHIFT)
+#define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
+
+/* Only these macros are expected be used directly in device tree files */
+#define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(INPUT_DISABLE | PULL_DOWN)
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN | PULL_DOWN)
+
+#define PIN_DEBOUNCE_DISABLE	(0 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF1	(1 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF2	(2 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF3	(3 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF4	(4 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
+#define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
+
+#define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM62PX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62PX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM62X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM62X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM64X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM64X_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define AM65X_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define AM65X_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721E_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721E_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J721S2_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J721S2_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#define J784S4_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
+#define J784S4_WKUP_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
+
+#endif
diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h
new file mode 100644
index 000000000..29167f85c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-serdes.h
@@ -0,0 +1,204 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides constants for SERDES MUX for TI SoCs
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef DTS_ARM64_TI_K3_SERDES_H
+#define DTS_ARM64_TI_K3_SERDES_H
+
+/* J721E */
+
+#define J721E_SERDES0_LANE0_QSGMII_LANE1	0x0
+#define J721E_SERDES0_LANE0_PCIE0_LANE0		0x1
+#define J721E_SERDES0_LANE0_USB3_0_SWAP		0x2
+#define J721E_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J721E_SERDES0_LANE1_QSGMII_LANE2	0x0
+#define J721E_SERDES0_LANE1_PCIE0_LANE1		0x1
+#define J721E_SERDES0_LANE1_USB3_0		0x2
+#define J721E_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J721E_SERDES1_LANE0_QSGMII_LANE3	0x0
+#define J721E_SERDES1_LANE0_PCIE1_LANE0		0x1
+#define J721E_SERDES1_LANE0_USB3_1_SWAP		0x2
+#define J721E_SERDES1_LANE0_SGMII_LANE0		0x3
+
+#define J721E_SERDES1_LANE1_QSGMII_LANE4	0x0
+#define J721E_SERDES1_LANE1_PCIE1_LANE1		0x1
+#define J721E_SERDES1_LANE1_USB3_1		0x2
+#define J721E_SERDES1_LANE1_SGMII_LANE1		0x3
+
+#define J721E_SERDES2_LANE0_IP1_UNUSED		0x0
+#define J721E_SERDES2_LANE0_PCIE2_LANE0		0x1
+#define J721E_SERDES2_LANE0_USB3_1_SWAP		0x2
+#define J721E_SERDES2_LANE0_SGMII_LANE0		0x3
+
+#define J721E_SERDES2_LANE1_IP1_UNUSED		0x0
+#define J721E_SERDES2_LANE1_PCIE2_LANE1		0x1
+#define J721E_SERDES2_LANE1_USB3_1		0x2
+#define J721E_SERDES2_LANE1_SGMII_LANE1		0x3
+
+#define J721E_SERDES3_LANE0_IP1_UNUSED		0x0
+#define J721E_SERDES3_LANE0_PCIE3_LANE0		0x1
+#define J721E_SERDES3_LANE0_USB3_0_SWAP		0x2
+#define J721E_SERDES3_LANE0_IP4_UNUSED		0x3
+
+#define J721E_SERDES3_LANE1_IP1_UNUSED		0x0
+#define J721E_SERDES3_LANE1_PCIE3_LANE1		0x1
+#define J721E_SERDES3_LANE1_USB3_0		0x2
+#define J721E_SERDES3_LANE1_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE0_EDP_LANE0		0x0
+#define J721E_SERDES4_LANE0_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE0_QSGMII_LANE5	0x2
+#define J721E_SERDES4_LANE0_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE1_EDP_LANE1		0x0
+#define J721E_SERDES4_LANE1_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE1_QSGMII_LANE6	0x2
+#define J721E_SERDES4_LANE1_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE2_EDP_LANE2		0x0
+#define J721E_SERDES4_LANE2_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE2_QSGMII_LANE7	0x2
+#define J721E_SERDES4_LANE2_IP4_UNUSED		0x3
+
+#define J721E_SERDES4_LANE3_EDP_LANE3		0x0
+#define J721E_SERDES4_LANE3_IP2_UNUSED		0x1
+#define J721E_SERDES4_LANE3_QSGMII_LANE8	0x2
+#define J721E_SERDES4_LANE3_IP4_UNUSED		0x3
+
+/* J7200 */
+
+#define J7200_SERDES0_LANE0_QSGMII_LANE3	0x0
+#define J7200_SERDES0_LANE0_PCIE1_LANE0		0x1
+#define J7200_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J7200_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J7200_SERDES0_LANE1_QSGMII_LANE4	0x0
+#define J7200_SERDES0_LANE1_PCIE1_LANE1		0x1
+#define J7200_SERDES0_LANE1_IP3_UNUSED		0x2
+#define J7200_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J7200_SERDES0_LANE2_QSGMII_LANE1	0x0
+#define J7200_SERDES0_LANE2_PCIE1_LANE2		0x1
+#define J7200_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J7200_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J7200_SERDES0_LANE3_QSGMII_LANE2	0x0
+#define J7200_SERDES0_LANE3_PCIE1_LANE3		0x1
+#define J7200_SERDES0_LANE3_USB			0x2
+#define J7200_SERDES0_LANE3_IP4_UNUSED		0x3
+
+/* AM64 */
+
+#define AM64_SERDES0_LANE0_PCIE0		0x0
+#define AM64_SERDES0_LANE0_USB			0x1
+
+/* J721S2 */
+
+#define J721S2_SERDES0_LANE0_EDP_LANE0		0x0
+#define J721S2_SERDES0_LANE0_PCIE1_LANE0	0x1
+#define J721S2_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE1_EDP_LANE1		0x0
+#define J721S2_SERDES0_LANE1_PCIE1_LANE1	0x1
+#define J721S2_SERDES0_LANE1_USB		0x2
+#define J721S2_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE2_EDP_LANE2		0x0
+#define J721S2_SERDES0_LANE2_PCIE1_LANE2	0x1
+#define J721S2_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J721S2_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J721S2_SERDES0_LANE3_EDP_LANE3		0x0
+#define J721S2_SERDES0_LANE3_PCIE1_LANE3	0x1
+#define J721S2_SERDES0_LANE3_USB		0x2
+#define J721S2_SERDES0_LANE3_IP4_UNUSED		0x3
+
+/* J784S4 */
+
+#define J784S4_SERDES0_LANE0_IP1_UNUSED		0x0
+#define J784S4_SERDES0_LANE0_PCIE1_LANE0	0x1
+#define J784S4_SERDES0_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES0_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES0_LANE1_IP1_UNUSED		0x0
+#define J784S4_SERDES0_LANE1_PCIE1_LANE1	0x1
+#define J784S4_SERDES0_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES0_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES0_LANE2_PCIE3_LANE0	0x0
+#define J784S4_SERDES0_LANE2_PCIE1_LANE2	0x1
+#define J784S4_SERDES0_LANE2_IP3_UNUSED		0x2
+#define J784S4_SERDES0_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES0_LANE3_PCIE3_LANE1	0x0
+#define J784S4_SERDES0_LANE3_PCIE1_LANE3	0x1
+#define J784S4_SERDES0_LANE3_USB		0x2
+#define J784S4_SERDES0_LANE3_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE0_QSGMII_LANE3	0x0
+#define J784S4_SERDES1_LANE0_PCIE0_LANE0	0x1
+#define J784S4_SERDES1_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES1_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE1_QSGMII_LANE4	0x0
+#define J784S4_SERDES1_LANE1_PCIE0_LANE1	0x1
+#define J784S4_SERDES1_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES1_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE2_QSGMII_LANE1	0x0
+#define J784S4_SERDES1_LANE2_PCIE0_LANE2	0x1
+#define J784S4_SERDES1_LANE2_PCIE2_LANE0	0x2
+#define J784S4_SERDES1_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES1_LANE3_QSGMII_LANE2	0x0
+#define J784S4_SERDES1_LANE3_PCIE0_LANE3	0x1
+#define J784S4_SERDES1_LANE3_PCIE2_LANE1	0x2
+#define J784S4_SERDES1_LANE3_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE0_QSGMII_LANE5	0x0
+#define J784S4_SERDES2_LANE0_IP2_UNUSED		0x1
+#define J784S4_SERDES2_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE1_QSGMII_LANE6	0x0
+#define J784S4_SERDES2_LANE1_IP2_UNUSED		0x1
+#define J784S4_SERDES2_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE2_QSGMII_LANE7	0x0
+#define J784S4_SERDES2_LANE2_QSGMII_LANE1	0x1
+#define J784S4_SERDES2_LANE2_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES2_LANE3_QSGMII_LANE8	0x0
+#define J784S4_SERDES2_LANE3_QSGMII_LANE2	0x1
+#define J784S4_SERDES2_LANE3_IP3_UNUSED		0x2
+#define J784S4_SERDES2_LANE3_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE0_EDP_LANE0		0x0
+#define J784S4_SERDES4_LANE0_QSGMII_LANE5	0x1
+#define J784S4_SERDES4_LANE0_IP3_UNUSED		0x2
+#define J784S4_SERDES4_LANE0_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE1_EDP_LANE1		0x0
+#define J784S4_SERDES4_LANE1_QSGMII_LANE6	0x1
+#define J784S4_SERDES4_LANE1_IP3_UNUSED		0x2
+#define J784S4_SERDES4_LANE1_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE2_EDP_LANE2		0x0
+#define J784S4_SERDES4_LANE2_QSGMII_LANE7	0x1
+#define J784S4_SERDES4_LANE2_IP3_UNUSED		0x2
+#define J784S4_SERDES4_LANE2_IP4_UNUSED		0x3
+
+#define J784S4_SERDES4_LANE3_EDP_LANE3		0x0
+#define J784S4_SERDES4_LANE3_QSGMII_LANE8	0x1
+#define J784S4_SERDES4_LANE3_USB		0x2
+#define J784S4_SERDES4_LANE3_IP4_UNUSED		0x3
+
+#endif /* DTS_ARM64_TI_K3_SERDES_H */
diff --git a/arch/arm64/boot/dts/toshiba/Makefile b/arch/arm64/boot/dts/toshiba/Makefile
new file mode 100644
index 000000000..7ccb4664b
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
+dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
new file mode 100644
index 000000000..d209fdc98
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 RM main board
+ *
+ * (C) Copyright 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+
+/ {
+	model = "Toshiba TMPV7708 RM main board";
+	compatible = "toshiba,tmpv7708-rm-mbrc", "toshiba,tmpv7708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 768MB memory */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x30000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&piether {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@1 {
+			device_type = "ethernet-phy";
+			reg = <0x1>;
+		};
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&pwm_mux {
+	groups = "pwm0_gpio16_grp", "pwm1_gpio17_grp", "pwm2_gpio18_grp", "pwm3_gpio19_grp";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
new file mode 100644
index 000000000..ed7aa7e45
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRB board
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708-visrobo-vrc.dtsi"
+
+/ {
+	model = "Toshiba TMPV7708 VisROBO (VRB) board";
+	compatible = "toshiba,tmpv7708-visrobo-vrb", "toshiba,tmpv7708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 768MB memory */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x30000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&piether {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@1 {
+			device_type = "ethernet-phy";
+			reg = <0x1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
new file mode 100644
index 000000000..0c8321022
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree File for TMPV7708 VisROBO VRC SoM
+ *
+ * (C) Copyright 2020, 2021, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+/dts-v1/;
+
+#include "tmpv7708.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+&wdt {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&spi0_pins {
+	groups = "spi0_grp", "spi0_cs0_grp";
+};
+
+&spi0 {
+	status = "okay";
+
+	mmc-slot@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		voltage-ranges = <3200 3400>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
new file mode 100644
index 000000000..b04829b31
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Source for the TMPV7708
+ *
+ * (C) Copyright 2018 - 2020, Toshiba Corporation.
+ * (C) Copyright 2020, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ *
+ */
+
+#include <dt-bindings/clock/toshiba,tmpv770x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x81000000 0x00300000;	/* cpu-release-addr */
+
+/ {
+	compatible = "toshiba,tmpv7708";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x00>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x01>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x02>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x03>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x81100000>;
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts =
+			<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	extclk100mhz: extclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "extclk100mhz";
+	};
+
+	osc2_clk: osc2-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gic: interrupt-controller@24001000 {
+			compatible = "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+			reg = <0 0x24001000 0 0x1000>,
+			      <0 0x24002000 0 0x2000>,
+			      <0 0x24004000 0 0x2000>,
+			      <0 0x24006000 0 0x2000>;
+		};
+
+		pmux: pmux@24190000 {
+			compatible = "toshiba,tmpv7708-pinctrl";
+			reg = <0 0x24190000 0 0x10000>;
+		};
+
+		gpio: gpio@28020000 {
+			compatible = "toshiba,gpio-tmpv7708";
+			reg = <0 0x28020000 0 0x1000>;
+			#gpio-cells = <0x2>;
+			gpio-ranges = <&pmux 0 0 32>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&gic>;
+		};
+
+		pipllct: clock-controller@24220000 {
+			compatible = "toshiba,tmpv7708-pipllct";
+			reg = <0 0x24220000 0 0x820>;
+			#clock-cells = <1>;
+			clocks = <&osc2_clk>;
+		};
+
+		pismu: syscon@24200000 {
+			compatible = "toshiba,tmpv7708-pismu", "syscon";
+			reg = <0 0x24200000 0 0x2140>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		uart0: serial@28200000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28200000 0 0x1000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART0>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@28201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28201000 0 0x1000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@28202000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28202000 0 0x1000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@28203000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0x28203000 0 0x1000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins>;
+			clocks = <&pismu TMPV770X_CLK_PIUART2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		i2c0: i2c@28030000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28030000 0 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@28031000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28031000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@28032000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28032000 0 0x1000>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@28033000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28033000 0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C3>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@28034000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28034000 0 0x1000>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C4>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@28035000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28035000 0 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C5>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@28036000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28036000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C6>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@28037000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28037000 0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C7>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@28038000 {
+			compatible = "snps,designware-i2c";
+			reg = <0 0x28038000 0 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_pins>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PII2C8>;
+			status = "disabled";
+		};
+
+		spi0: spi@28140000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28140000 0 0x1000>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@28141000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28141000 0 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@28142000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28142000 0 0x1000>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi3: spi@28143000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28143000 0 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi3_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI3>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi4: spi@28144000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28144000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi4_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI4>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi5: spi@28145000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28145000 0 0x1000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi5_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI5>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		spi6: spi@28146000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0 0x28146000 0 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi6_pins>;
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&pismu TMPV770X_CLK_PISPI6>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		piether: ethernet@28000000 {
+			compatible = "toshiba,visconti-dwmac", "snps,dwmac-4.20a";
+			reg = <0 0x28000000 0 0x10000>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			snps,txpbl = <4>;
+			snps,rxpbl = <4>;
+			snps,tso;
+			clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
+			clock-names = "stmmaceth", "phy_ref_clk";
+			status = "disabled";
+		};
+
+		wdt: wdt@28330000 {
+			compatible = "toshiba,visconti-wdt";
+			reg = <0 0x28330000 0 0x1000>;
+			clocks = <&pismu TMPV770X_CLK_WDTCLK>;
+			status = "disabled";
+		};
+
+		pwm: pwm@241c0000 {
+			compatible = "toshiba,visconti-pwm";
+			reg = <0 0x241c0000 0 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_mux>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pcie: pcie@28400000 {
+			compatible = "toshiba,visconti-pcie";
+			reg = <0x0 0x28400000 0x0 0x00400000>,
+			      <0x0 0x70000000 0x0 0x10000000>,
+			      <0x0 0x28050000 0x0 0x00010000>,
+			      <0x0 0x24200000 0x0 0x00002000>,
+			      <0x0 0x24162000 0x0 0x00001000>;
+			reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			num-lanes = <2>;
+			num-viewport = <8>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000
+				  0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+			interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi", "intr";
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map =
+				<0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+				 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+				 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+				 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			max-link-speed = <2>;
+			clocks = <&extclk100mhz>, <&pismu TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>;
+			clock-names = "ref", "core", "aux";
+			status = "disabled";
+		};
+	};
+};
+
+#include "tmpv7708_pins.dtsi"
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
new file mode 100644
index 000000000..a480c6ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708_pins.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+&pmux {
+	spi0_pins: spi0-pins {
+		function = "spi0";
+		groups = "spi0_grp";
+	};
+	spi1_pins: spi1-pins {
+		function = "spi1";
+		groups = "spi1_grp";
+	};
+	spi2_pins: spi2-pins {
+		function = "spi2";
+		groups = "spi2_grp";
+	};
+	spi3_pins: spi3-pins {
+		function = "spi3";
+		groups = "spi3_grp";
+	};
+	spi4_pins: spi4-pins {
+		function = "spi4";
+		groups = "spi4_grp";
+	};
+	spi5_pins: spi5-pins {
+		function = "spi5";
+		groups = "spi5_grp";
+	};
+	spi6_pins: spi6-pins {
+		function = "spi6";
+		groups = "spi6_grp";
+	};
+	uart0_pins: uart0-pins {
+		function = "uart0";
+		groups = "uart0_grp";
+	};
+	uart1_pins: uart1-pins {
+		function = "uart1";
+		groups = "uart1_grp";
+	};
+	uart2_pins: uart2-pins {
+		function = "uart2";
+		groups = "uart2_grp";
+	};
+	uart3_pins: uart3-pins {
+		function = "uart3";
+		groups = "uart3_grp";
+	};
+	i2c0_pins: i2c0-pins {
+		function = "i2c0";
+		groups = "i2c0_grp";
+		bias-pull-up;
+	};
+	i2c1_pins: i2c1-pins {
+		function = "i2c1";
+		groups = "i2c1_grp";
+		bias-pull-up;
+	};
+	i2c2_pins: i2c2-pins {
+		function = "i2c2";
+		groups = "i2c2_grp";
+		bias-pull-up;
+	};
+	i2c3_pins: i2c3-pins {
+		function = "i2c3";
+		groups = "i2c3_grp";
+		bias-pull-up;
+	};
+	i2c4_pins: i2c4-pins {
+		function = "i2c4";
+		groups = "i2c4_grp";
+		bias-pull-up;
+	};
+	i2c5_pins: i2c5-pins {
+		function = "i2c5";
+		groups = "i2c5_grp";
+		bias-pull-up;
+	};
+	i2c6_pins: i2c6-pins {
+		function = "i2c6";
+		groups = "i2c6_grp";
+		bias-pull-up;
+	};
+	i2c7_pins: i2c7-pins {
+		function = "i2c7";
+		groups = "i2c7_grp";
+		bias-pull-up;
+	};
+	i2c8_pins: i2c8-pins {
+		function = "i2c8";
+		groups = "i2c8_grp";
+		bias-pull-up;
+	};
+
+	pwm_mux: pwm_mux {
+		function = "pwm";
+	};
+
+};
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
new file mode 100644
index 000000000..1068b0fa8
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.1.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revC.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu1275-revA.dtb
+
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb
+
+zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb
+zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb
+zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
+zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
new file mode 100644
index 000000000..4c1bd69e7
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
new file mode 100644
index 000000000..ccaca2920
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Clock specification for Xilinx ZynqMP
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+/ {
+	pss_ref_clk: pss_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33333333>;
+	};
+
+	video_clk: video_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	pss_alt_ref_clk: pss_alt_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	gt_crx_ref_clk: gt_crx_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <108000000>;
+	};
+
+	aux_ref_clk: aux_ref_clk {
+		bootph-all;
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&zynqmp_firmware {
+	zynqmp_clk: clock-controller {
+		bootph-all;
+		#clock-cells = <1>;
+		compatible = "xlnx,zynqmp-clk";
+		clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>,
+			 <&aux_ref_clk>, <&gt_crx_ref_clk>;
+		clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk",
+			      "aux_ref_clk", "gt_crx_ref_clk";
+	};
+};
+
+&can0 {
+	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&can1 {
+	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&cpu0 {
+	clocks = <&zynqmp_clk ACPU>;
+};
+
+&fpd_dma_chan1 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gpu {
+	clocks = <&zynqmp_clk GPU_REF>, <&zynqmp_clk GPU_PP0_REF>;
+};
+
+&lpd_dma_chan1 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan2 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan3 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan4 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan5 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan6 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan7 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&lpd_dma_chan8 {
+	clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&nand0 {
+	clocks = <&zynqmp_clk NAND_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&gem0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
+		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gem1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gem2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
+		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gem3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
+		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
+		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
+};
+
+&gpio {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&i2c0 {
+	clocks = <&zynqmp_clk I2C0_REF>;
+};
+
+&i2c1 {
+	clocks = <&zynqmp_clk I2C1_REF>;
+};
+
+&pcie {
+	clocks = <&zynqmp_clk PCIE_REF>;
+};
+
+&qspi {
+	clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&sata {
+	clocks = <&zynqmp_clk SATA_REF>;
+};
+
+&sdhci0 {
+	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO0_REF>;
+};
+
+&sdhci1 {
+	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
+	assigned-clocks = <&zynqmp_clk SDIO1_REF>;
+};
+
+&spi0 {
+	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&spi1 {
+	clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc0 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc1 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc2 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&ttc3 {
+	clocks = <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart0 {
+	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&uart1 {
+	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
+};
+
+&dwc3_0 {
+	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&dwc3_1 {
+	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
+};
+
+&watchdog0 {
+	clocks = <&zynqmp_clk WDT>;
+};
+
+&lpd_watchdog {
+	clocks = <&zynqmp_clk LPD_WDT>;
+};
+
+&xilinx_ams {
+	clocks = <&zynqmp_clk AMS_REF>;
+};
+
+&zynqmp_dpdma {
+	clocks = <&zynqmp_clk DPDMA_REF>;
+	assigned-clocks = <&zynqmp_clk DPDMA_REF>; /* apll */
+};
+
+&zynqmp_dpsub {
+	clocks = <&zynqmp_clk TOPSW_LSBUS>,
+		 <&zynqmp_clk DP_AUDIO_REF>,
+		 <&zynqmp_clk DP_VIDEO_REF>;
+	assigned-clocks = <&zynqmp_clk DP_STC_REF>,
+			  <&zynqmp_clk DP_AUDIO_REF>,
+			  <&zynqmp_clk DP_VIDEO_REF>;  /* rpll, rpll, vpll */
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
new file mode 100644
index 000000000..ae1b9b2bd
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KV260 revA Carrier Card
+ *
+ * (C) Copyright 2020 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * SD level shifter:
+ * "A" - A01 board un-modified (NXP)
+ * "Y" - A01 board modified with legacy interposer (Nexperia)
+ * "Z" - A01 board modified with Diode interposer
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
+&amba {
+	si5332_0: si5332_0 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	si5332_1: si5332_1 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	si5332_2: si5332_2 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	si5332_3: si5332_3 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	si5332_4: si5332_4 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5332_5: si5332_5 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+/* DP/USB 3.0 and SATA */
+&psgtr {
+	status = "okay";
+	/* pcie, usb3, sata */
+	clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 2>;
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+	/* missing usb5744 - u43 */
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&sdhci1 { /* on CC with tuned parameters */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	/*
+	 * SD 3.0 requires level shifter and this property
+	 * should be removed if the board has level shifter and
+	 * need to work in UHS mode
+	 */
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+	assigned-clock-rates = <187498123>;
+	bus-width = <4>;
+};
+
+&gem3 { /* required by spec */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			#phy-cells = <1>;
+			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl0 { /* required by spec */
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO72", "MIO74";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO71", "MIO73", "MIO75";
+			bias-disable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66",
+				"MIO67", "MIO68", "MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
new file mode 100644
index 000000000..b59e48be6
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KV260 revA Carrier Card
+ *
+ * (C) Copyright 2020 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* u14 - 0x40 - ina260 */
+	/* u43 - 0x2d - usb5744 */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
+&amba {
+	si5332_0: si5332_0 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	si5332_1: si5332_1 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	si5332_2: si5332_2 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	si5332_3: si5332_3 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	si5332_4: si5332_4 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5332_5: si5332_5 { /* u17 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+/* DP/USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* pcie, usb3, sata */
+	clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&sdhci1 { /* on CC with tuned parameters */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	/*
+	 * SD 3.0 requires level shifter and this property
+	 * should be removed if the board has level shifter and
+	 * need to work in UHS mode
+	 */
+	no-1-8-v;
+	disable-wp;
+	xlnx,mio-bank = <1>;
+	clk-phase-sd-hs = <126>, <60>;
+	clk-phase-uhs-sdr25 = <120>, <60>;
+	clk-phase-uhs-ddr50 = <126>, <48>;
+	assigned-clock-rates = <187498123>;
+	bus-width = <4>;
+};
+
+&gem3 { /* required by spec */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			#phy-cells = <1>;
+			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl0 { /* required by spec */
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO72", "MIO74";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO71", "MIO73", "MIO75";
+			bias-disable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66",
+				"MIO67", "MIO68", "MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
new file mode 100644
index 000000000..c4774a42d
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SM-K26 rev1/B/A
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP SM-K26 Rev1/B/A";
+	compatible = "xlnx,zynqmp-sm-k26-rev1", "xlnx,zynqmp-sm-k26-revB",
+		     "xlnx,zynqmp-sm-k26-revA", "xlnx,zynqmp-sm-k26",
+		     "xlnx,zynqmp";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		nvmem0 = &eeprom;
+		nvmem1 = &eeprom_cc;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		spi1 = &spi0;
+		spi2 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory"; /* 4GB */
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pmu_region: pmu@7ff00000 {
+			reg = <0x0 0x7ff00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		key-fwuen {
+			label = "fwuen";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ds35-led {
+			label = "heartbeat";
+			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds36-led {
+			label = "vbus_det";
+			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	ams {
+		compatible = "iio-hwmon";
+		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+			<&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+			<&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+			<&xilinx_ams 9>, <&xilinx_ams 10>, <&xilinx_ams 11>,
+			<&xilinx_ams 12>, <&xilinx_ams 13>, <&xilinx_ams 14>,
+			<&xilinx_ams 15>, <&xilinx_ams 16>, <&xilinx_ams 17>,
+			<&xilinx_ams 18>, <&xilinx_ams 19>, <&xilinx_ams 20>,
+			<&xilinx_ams 21>, <&xilinx_ams 22>, <&xilinx_ams 23>,
+			<&xilinx_ams 24>, <&xilinx_ams 25>, <&xilinx_ams 26>,
+			<&xilinx_ams 27>, <&xilinx_ams 28>, <&xilinx_ams 29>;
+	};
+};
+
+&modepin_gpio {
+	label = "modepin";
+};
+
+&uart1 { /* MIO36/MIO37 */
+	status = "okay";
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_sdhci0_default: sdhci0-default {
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+	};
+};
+
+&qspi { /* MIO 0-5 - U143 */
+	status = "okay";
+	spi_flash: flash@0 { /* MT25QU512A */
+		compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <40000000>; /* 40MHz */
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "Image Selector";
+				reg = <0x0 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@80000 {
+				label = "Image Selector Golden";
+				reg = <0x80000 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@100000 {
+				label = "Persistent Register";
+				reg = <0x100000 0x20000>; /* 128KB */
+			};
+			partition@120000 {
+				label = "Persistent Register Backup";
+				reg = <0x120000 0x20000>; /* 128KB */
+			};
+			partition@140000 {
+				label = "Open_1";
+				reg = <0x140000 0xC0000>; /* 768KB */
+			};
+			partition@200000 {
+				label = "Image A (FSBL, PMU, ATF, U-Boot)";
+				reg = <0x200000 0xD00000>; /* 13MB */
+			};
+			partition@f00000 {
+				label = "ImgSel Image A Catch";
+				reg = <0xF00000 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@f80000 {
+				label = "Image B (FSBL, PMU, ATF, U-Boot)";
+				reg = <0xF80000 0xD00000>; /* 13MB */
+			};
+			partition@1c80000 {
+				label = "ImgSel Image B Catch";
+				reg = <0x1C80000 0x80000>; /* 512KB */
+				read-only;
+				lock;
+			};
+			partition@1d00000 {
+				label = "Open_2";
+				reg = <0x1D00000 0x100000>; /* 1MB */
+			};
+			partition@1e00000 {
+				label = "Recovery Image";
+				reg = <0x1E00000 0x200000>; /* 2MB */
+				read-only;
+				lock;
+			};
+			partition@2000000 {
+				label = "Recovery Image Backup";
+				reg = <0x2000000 0x200000>; /* 2MB */
+				read-only;
+				lock;
+			};
+			partition@2200000 {
+				label = "U-Boot storage variables";
+				reg = <0x2200000 0x20000>; /* 128KB */
+			};
+			partition@2220000 {
+				label = "U-Boot storage variables backup";
+				reg = <0x2220000 0x20000>; /* 128KB */
+			};
+			partition@2240000 {
+				label = "SHA256";
+				reg = <0x2240000 0x40000>; /* 256B but 256KB sector */
+				read-only;
+				lock;
+			};
+			partition@2280000 {
+				label = "Secure OS Storage";
+				reg = <0x2280000 0x20000>; /* 128KB */
+			};
+			partition@22A0000 {
+				label = "User";
+				reg = <0x22A0000 0x1d60000>; /* 29.375 MB */
+			};
+		};
+	};
+};
+
+&sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	non-removable;
+	disable-wp;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+	assigned-clock-rates = <187498123>;
+};
+
+&spi1 { /* MIO6, 9-11 */
+	status = "okay";
+	label = "TPM";
+	num-cs = <1>;
+	tpm@0 { /* slm9670 - U144 */
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <18500000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bootph-all;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
+		bootph-all;
+		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
+		reg = <0x50>;
+		/* WP pin EE_WP_EN connected to slg7x644092@68 */
+	};
+
+	eeprom_cc: eeprom@51 { /* required by spec - also at address 0x59 */
+		bootph-all;
+		compatible = "st,24c64", "atmel,24c64"; /* st m24c64 */
+		reg = <0x51>;
+	};
+
+	/* da9062@30 - u170 - also at address 0x31 */
+	/* da9131@33 - u167 */
+	da9131: pmic@33 {
+		compatible = "dlg,da9131";
+		reg = <0x33>;
+		regulators {
+			da9131_buck1: buck1 {
+				regulator-name = "da9131_buck1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+			da9131_buck2: buck2 {
+				regulator-name = "da9131_buck2";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* da9130@32 - u166 */
+	da9130: pmic@32 {
+		compatible = "dlg,da9130";
+		reg = <0x32>;
+		regulators {
+			da9130_buck1: buck1 {
+				regulator-name = "da9130_buck1";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	/* slg7x644091@70 - u168 NOT accessible due to address conflict with stdp4320 */
+	/*
+	 * stdp4320 - u27 FW has below two issues to be fixed in next board revision.
+	 * Device acknowledging to addresses 0x5C, 0x5D, 0x70, 0x72, 0x76.
+	 * Address conflict with slg7x644091@70 making both the devices NOT accessible.
+	 * With the FW fix, stdp4320 should respond to address 0x73 only.
+	 */
+	/* slg7x644092@68 - u169 */
+	/* Also connected via JA1C as C23/C24 */
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "QSPI_CLK", "QSPI_DQ1", "QSPI_DQ2", "QSPI_DQ3", "QSPI_DQ0", /* 0 - 4 */
+			  "QSPI_CS_B", "SPI_CLK", "LED1", "LED2", "SPI_CS_B", /* 5 - 9 */
+			  "SPI_MISO", "SPI_MOSI", "FWUEN", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */
+			  "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */
+			  "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST", "I2C1_SCL", /* 20 - 24 */
+			  "I2C1_SDA", "", "", "", "", /* 25 - 29 */
+			  "", "", "", "", "", /* 30 - 34 */
+			  "", "", "", "", "", /* 35 - 39 */
+			  "", "", "", "", "", /* 40 - 44 */
+			  "", "", "", "", "", /* 45 - 49 */
+			  "", "", "", "", "", /* 50 - 54 */
+			  "", "", "", "", "", /* 55 - 59 */
+			  "", "", "", "", "", /* 60 - 64 */
+			  "", "", "", "", "", /* 65 - 69 */
+			  "", "", "", "", "", /* 70 - 74 */
+			  "", "", "", /* 75 - 77, MIO end and EMIO start */
+			  "", "", /* 78 - 79 */
+			  "", "", "", "", "", /* 80 - 84 */
+			  "", "", "", "", "", /* 85 - 89 */
+			  "", "", "", "", "", /* 90 - 94 */
+			  "", "", "", "", "", /* 95 - 99 */
+			  "", "", "", "", "", /* 100 - 104 */
+			  "", "", "", "", "", /* 105 - 109 */
+			  "", "", "", "", "", /* 110 - 114 */
+			  "", "", "", "", "", /* 115 - 119 */
+			  "", "", "", "", "", /* 120 - 124 */
+			  "", "", "", "", "", /* 125 - 129 */
+			  "", "", "", "", "", /* 130 - 134 */
+			  "", "", "", "", "", /* 135 - 139 */
+			  "", "", "", "", "", /* 140 - 144 */
+			  "", "", "", "", "", /* 145 - 149 */
+			  "", "", "", "", "", /* 150 - 154 */
+			  "", "", "", "", "", /* 155 - 159 */
+			  "", "", "", "", "", /* 160 - 164 */
+			  "", "", "", "", "", /* 165 - 169 */
+			  "", "", "", ""; /* 170 - 173 */
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&lpd_dma_chan1 {
+	status = "okay";
+};
+
+&lpd_dma_chan2 {
+	status = "okay";
+};
+
+&lpd_dma_chan3 {
+	status = "okay";
+};
+
+&lpd_dma_chan4 {
+	status = "okay";
+};
+
+&lpd_dma_chan5 {
+	status = "okay";
+};
+
+&lpd_dma_chan6 {
+	status = "okay";
+};
+
+&lpd_dma_chan7 {
+	status = "okay";
+};
+
+&lpd_dma_chan8 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&lpd_watchdog {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&cpu_opp_table {
+	opp00 {
+		opp-hz = /bits/ 64 <1333333333>;
+	};
+	opp01 {
+		opp-hz = /bits/ 64 <666666666>;
+	};
+	opp02 {
+		opp-hz = /bits/ 64 <444444444>;
+	};
+	opp03 {
+		opp-hz = /bits/ 64 <333333333>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
new file mode 100644
index 000000000..85b0d1677
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SMK-K26 rev1/B/A
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k26-revA.dts"
+
+/ {
+	model = "ZynqMP SMK-K26 Rev1/B/A";
+	compatible = "xlnx,zynqmp-smk-k26-rev1", "xlnx,zynqmp-smk-k26-revB",
+		     "xlnx,zynqmp-smk-k26-revA", "xlnx,zynqmp-smk-k26",
+		     "xlnx,zynqmp";
+};
+
+&sdhci0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
new file mode 100644
index 000000000..04079d170
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1232
+ *
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZC1232 RevA";
+	compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
new file mode 100644
index 000000000..3dec57cf1
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1254
+ *
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZC1254 RevA";
+	compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
new file mode 100644
index 000000000..e821d55d8
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm015-dc1
+ *
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm015-dc1 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	clock_si5338_0: clk27 {	/* u55 SI5338-GM */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clock_si5338_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_si5338_3: clk150 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <150000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	eeprom: eeprom@55 {
+		compatible = "atmel,24c64"; /* 24AA64 */
+		reg = <0x55>;
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_9_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_9_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_36_grp", "gpio0_37_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_8_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_8_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO34";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO35";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio0_wp_0_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "sdio0_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_38_grp";
+		};
+
+		conf {
+			groups = "gpio0_38_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* dp, usb3, sata */
+	clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* eMMC */
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	bus-width = <8>;
+	xlnx,mio-bank = <0>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 0>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
new file mode 100644
index 000000000..b59e11316
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm016-dc2
+ *
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm016-dc2 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem2;
+		i2c0 = &i2c0;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem2 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem2_default>;
+	phy0: ethernet-phy@5 {
+		reg = <5>;
+		ti,rx-internal-delay = <0x8>;
+		ti,tx-internal-delay = <0xa>;
+		ti,fifo-depth = <0x1>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&nand0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand0_default>;
+	arasan,has-mdma;
+
+	nand@0 {
+		reg = <0x0>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-0";
+	};
+	nand@1 {
+		reg = <0x1>;
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-1";
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO38";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO39";
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_8_grp";
+		};
+
+		conf {
+			groups = "can1_8_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO33";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO32";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_1_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_6_grp", "gpio0_7_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_6_grp", "gpio0_7_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_10_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_10_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO42";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO43";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO41";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO40";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem2_default: gem2-default {
+		mux {
+			function = "ethernet2";
+			groups = "ethernet2_0_grp";
+		};
+
+		conf {
+			groups = "ethernet2_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62",
+									"MIO63";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56",
+									"MIO57";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio2";
+			groups = "mdio2_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio2_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_nand0_default: nand0-default {
+		mux {
+			groups = "nand0_0_grp";
+			function = "nand0";
+		};
+
+		conf {
+			groups = "nand0_0_grp";
+			bias-pull-up;
+		};
+
+		mux-ce {
+			groups = "nand0_ce_0_grp";
+			function = "nand0_ce";
+		};
+
+		conf-ce {
+			groups = "nand0_ce_0_grp";
+			bias-pull-up;
+		};
+
+		mux-rb {
+			groups = "nand0_rb_0_grp";
+			function = "nand0_rb";
+		};
+
+		conf-rb {
+			groups = "nand0_rb_0_grp";
+			bias-pull-up;
+		};
+
+		mux-dqs {
+			groups = "nand0_dqs_0_grp";
+			function = "nand0_dqs";
+		};
+
+		conf-dqs {
+			groups = "nand0_dqs_0_grp";
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_0_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
+							"spi0_ss_2_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
+							"spi0_ss_2_grp";
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_3_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
+							"spi1_ss_11_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
+							"spi1_ss_11_grp";
+			bias-disable;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+
+	spi0_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25wf080", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "spi0-data";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	spi1_flash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "spi1-data";
+			reg = <0x0 0x84000>;
+		};
+	};
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
new file mode 100644
index 000000000..38b0a3121
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm017-dc3
+ *
+ * (C) Copyright 2016 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP zc1751-xm017-dc3 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	clock_si5338_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_si5338_3: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	phy0: ethernet-phy@0 { /* VSC8211 */
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+/* just eeprom here */
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416_u26: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/* IRQ not connected */
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+/* eeprom24c02 and SE98A temp chip pca9306 */
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+/* MT29F64G08AECDBJ4-6 */
+&nand0 {
+	status = "okay";
+	arasan,has-mdma;
+	num-cs = <2>;
+};
+
+&psgtr {
+	status = "okay";
+	/* usb3, sata */
+	clocks = <&clock_si5338_2>, <&clock_si5338_3>;
+	clock-names = "ref2", "ref3";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;
+};
+
+&sdhci1 { /* emmc with some settings */
+	status = "okay";
+};
+
+/* main */
+&uart0 {
+	status = "okay";
+};
+
+/* DB9 */
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 0 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
new file mode 100644
index 000000000..6636e7654
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm018-dc4
+ *
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP zc1751-xm018-dc4";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem0;
+		ethernet1 = &gem1;
+		ethernet2 = &gem2;
+		ethernet3 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&lpd_dma_chan1 {
+	status = "okay";
+};
+
+&lpd_dma_chan2 {
+	status = "okay";
+};
+
+&lpd_dma_chan3 {
+	status = "okay";
+};
+
+&lpd_dma_chan4 {
+	status = "okay";
+};
+
+&lpd_dma_chan5 {
+	status = "okay";
+};
+
+&lpd_dma_chan6 {
+	status = "okay";
+};
+
+&lpd_dma_chan7 {
+	status = "okay";
+};
+
+&lpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy0>;
+	ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
+		reg = <0>;
+	};
+	ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
+		reg = <7>;
+	};
+	ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
+		reg = <3>;
+	};
+	ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
+		reg = <8>;
+	};
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy7>;
+};
+
+&gem2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy3>;
+};
+
+&gem3 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy8>;
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
new file mode 100644
index 000000000..0d2ea9c09
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP zc1751-xm019-dc5
+ *
+ * (C) Copyright 2015 - 2021, Xilinx, Inc.
+ *
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/ {
+	model = "ZynqMP zc1751-xm019-dc5 RevA";
+	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_18_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_18_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_74_grp", "gpio0_75_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_74_grp", "gpio0_75_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_19_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_19_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_76_grp", "gpio0_77_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_76_grp", "gpio0_77_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_17_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO71";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_18_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_18_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO73";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO72";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO45", "MIO46", "MIO47", "MIO48",
+									"MIO49";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40", "MIO41", "MIO42",
+									"MIO43";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_0_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio0_wp_0_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "sdio0_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_watchdog0_default: watchdog0-default {
+		mux-clk {
+			groups = "swdt0_clk_1_grp";
+			function = "swdt0_clk";
+		};
+
+		conf-clk {
+			groups = "swdt0_clk_1_grp";
+			bias-pull-up;
+		};
+
+		mux-rst {
+			groups = "swdt0_rst_1_grp";
+			function = "swdt0_rst";
+		};
+
+		conf-rst {
+			groups = "swdt0_rst_1_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc0_default: ttc0-default {
+		mux-clk {
+			groups = "ttc0_clk_0_grp";
+			function = "ttc0_clk";
+		};
+
+		conf-clk {
+			groups = "ttc0_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc0_wav_0_grp";
+			function = "ttc0_wav";
+		};
+
+		conf-wav {
+			groups = "ttc0_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc1_default: ttc1-default {
+		mux-clk {
+			groups = "ttc1_clk_0_grp";
+			function = "ttc1_clk";
+		};
+
+		conf-clk {
+			groups = "ttc1_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc1_wav_0_grp";
+			function = "ttc1_wav";
+		};
+
+		conf-wav {
+			groups = "ttc1_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc2_default: ttc2-default {
+		mux-clk {
+			groups = "ttc2_clk_0_grp";
+			function = "ttc2_clk";
+		};
+
+		conf-clk {
+			groups = "ttc2_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc2_wav_0_grp";
+			function = "ttc2_wav";
+		};
+
+		conf-wav {
+			groups = "ttc2_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_ttc3_default: ttc3-default {
+		mux-clk {
+			groups = "ttc3_clk_0_grp";
+			function = "ttc3_clk";
+		};
+
+		conf-clk {
+			groups = "ttc3_clk_0_grp";
+			bias-pull-up;
+		};
+
+		mux-wav {
+			groups = "ttc3_wav_0_grp";
+			function = "ttc3_wav";
+		};
+
+		conf-wav {
+			groups = "ttc3_wav_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	no-1-8-v;
+	xlnx,mio-bank = <0>;
+};
+
+&ttc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc0_default>;
+};
+
+&ttc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc1_default>;
+};
+
+&ttc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc2_default>;
+};
+
+&ttc3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ttc3_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&watchdog0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_watchdog0_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
new file mode 100644
index 000000000..d0091d3cb
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revC
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ * Nathalie Chan King Choy
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU100 RevC";
+	compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+	aliases {
+		i2c0 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &dcc;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-4 {
+			label = "sw4";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xilinx_ams 0>, <&xilinx_ams 1>, <&xilinx_ams 2>,
+			      <&xilinx_ams 3>, <&xilinx_ams 4>, <&xilinx_ams 5>,
+			      <&xilinx_ams 6>, <&xilinx_ams 7>, <&xilinx_ams 8>,
+			      <&xilinx_ams 9>, <&xilinx_ams 10>,
+			      <&xilinx_ams 11>, <&xilinx_ams 12>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-ds2 {
+			label = "ds2";
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-ds3 {
+			label = "ds3";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx"; /* WLAN tx */
+			default-state = "off";
+		};
+
+		led-ds4 {
+			label = "ds4";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0rx"; /* WLAN rx */
+			default-state = "off";
+		};
+
+		led-ds5 {
+			label = "ds5";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+		};
+
+		led-vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
+			label = "vbus_det";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	wmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "wmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		post-power-on-delay-ms = <10>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+	};
+
+	si5335_0: si5335_0 { /* clk0_usb - u23 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5335_1: si5335_1 { /* clk1_dp - u23 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
+			  "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
+			  "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
+			  "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
+			  "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
+			  "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
+			  "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
+			  "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
+			  "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
+			  "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
+			  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
+			  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
+			  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
+			  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
+			  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
+			  "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */
+			  "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	i2c-mux@75 { /* u11 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2csw_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			label = "LS-I2C0";
+		};
+		i2csw_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			label = "LS-I2C1";
+		};
+		i2csw_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			label = "HS-I2C2";
+		};
+		i2csw_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			label = "HS-I2C3";
+		};
+		i2csw_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pmic: pmic@5e { /* Custom TI PMIC u33 */
+				compatible = "ti,tps65086";
+				reg = <0x5e>;
+				interrupt-parent = <&gpio>;
+				interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2csw_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* PS_PMBUS */
+			u35: ina226@40 { /* u35 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <10000>;
+				/* MIO31 is alert which should be routed to PMUFW */
+			};
+		};
+		i2csw_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/*
+			 * Not Connected
+			 */
+		};
+		i2csw_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/*
+			 * usb5744 (DNP) - U5
+			 * 100kHz - this is default freq for us
+			 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_1_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_3_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_3_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_2_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_2_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_3_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_9_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_9_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_0_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_0_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_0_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_0_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO3";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO2";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_0_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO1";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO0";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* usb3, dp */
+	clocks = <&si5335_0>, <&si5335_1>;
+	clock-names = "ref0", "ref1";
+};
+
+&rtc {
+	status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	xlnx,mio-bank = <0>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <0>;
+	non-removable;
+	disable-wp;
+	cap-power-off-card;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vqmmc-supply = <&wmmcsdio_fixed>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wifi@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio>;
+		interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+	};
+};
+
+&spi0 { /* Low Speed connector */
+	status = "okay";
+	label = "LS-SPI0";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+};
+
+&spi1 { /* High Speed connector */
+	status = "okay";
+	label = "HS-SPI1";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+	/delete-property/ reset-gpios;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+	reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
new file mode 100644
index 000000000..c8f71a1ae
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.0
+ *
+ * (C) Copyright 2016 - 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-zcu102-revB.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.0";
+	compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&eeprom {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	board_sn: board-sn@0 {
+		reg = <0x0 0x14>;
+	};
+
+	eth_mac: eth-mac@20 {
+		reg = <0x20 0x6>;
+	};
+
+	board_name: board-name@d0 {
+		reg = <0xd0 0x6>;
+	};
+
+	board_revision: board-revision@e0 {
+		reg = <0xe0 0x3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
new file mode 100644
index 000000000..705369766
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 Rev1.1
+ *
+ * (C) Copyright 2016 - 2020, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-zcu102-rev1.0.dts"
+
+/ {
+	model = "ZynqMP ZCU102 Rev1.1";
+	compatible = "xlnx,zynqmp-zcu102-rev1.1", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
new file mode 100644
index 000000000..84952c14f
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -0,0 +1,1050 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevA
+ *
+ * (C) Copyright 2015 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU102 RevA";
+	compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@21 {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <21>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* IRQ not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
+		gtr-sel0-hog {
+			gpio-hog;
+			gpios = <0 0>;
+			output-low; /* PCIE = 0, DP = 1 */
+			line-name = "sel0";
+		};
+		gtr-sel1-hog {
+			gpio-hog;
+			gpios = <1 0>;
+			output-high; /* PCIE = 0, DP = 1 */
+			line-name = "sel1";
+		};
+		gtr-sel2-hog {
+			gpio-hog;
+			gpios = <2 0>;
+			output-high; /* PCIE = 0, USB0 = 1 */
+			line-name = "sel2";
+		};
+		gtr-sel3-hog {
+			gpio-hog;
+			gpios = <3 0>;
+			output-high; /* PCIE = 0, SATA = 1 */
+			line-name = "sel3";
+		};
+	};
+
+	tca6416_u61: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller; /* IRQ not connected */
+		#gpio-cells = <2>;
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
+	};
+
+	i2c-mux@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			u76: ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u87: ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u85: ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u86: ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u93: ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u88: ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u15: ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u92: ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			u79: ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u81: ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u80: ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u84: ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u16: ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u74: ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u75: ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "maxim,max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "maxim,max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "maxim,max15303";
+				reg = <0x1a>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "maxim,max15303";
+				reg = <0x1d>;
+			};
+			max15303@20 { /* u8 */
+				compatible = "maxim,max15303";
+				status = "disabled"; /* unreachable */
+				reg = <0x20>;
+			};
+			max20751@72 { /* u95 */
+				compatible = "maxim,max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 */
+				compatible = "maxim,max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_4: out@4 {
+					/* refclk4 for PS-GT, used for PCIE slot */
+					reg = <4>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 for PS-GT, used for PCIE */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SI5328 - u20 */
+		};
+		/* 5 - 7 unconnected */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux-sw {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf-sw {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22", "MIO23";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&psgtr {
+	status = "okay";
+	/* pcie, sata, usb3, dp */
+	clocks = <&si5341 0 5>, <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref0", "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * 1.0 revision has level shifter and this property should be
+	 * removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
new file mode 100644
index 000000000..3c2813090
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU102 RevB
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-zcu102-revA.dts"
+
+/ {
+	model = "ZynqMP ZCU102 RevB";
+	compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp";
+};
+
+&gem3 {
+	phy-handle = <&phyc>;
+	mdio: mdio {
+		phyc: ethernet-phy@c {
+			#phy-cells = <0x1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+		/* Cleanup from RevA */
+		/delete-node/ ethernet-phy@21;
+	};
+};
+
+/* Fix collision with u61 */
+&i2c0 {
+	i2c-mux@75 {
+		i2c@2 {
+			max15303@1b { /* u8 */
+				compatible = "maxim,max15303";
+				reg = <0x1b>;
+			};
+			/delete-node/ max15303@20;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
new file mode 100644
index 000000000..5084ddcee
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU104 RevA";
+	compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	clock_8t49n287_5: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clock_8t49n287_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_8t49n287_3: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* 8T49N287 - u182 */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x43>; /* pmbus / i2c 0x13 */
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* pmbus / i2c 0x14 */
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			tca6416_u97: gpio@20 {
+				compatible = "ti,tca6416";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				/*
+				 * IRQ not connected
+				 * Lines:
+				 * 0 - IRPS5401_ALERT_B
+				 * 1 - HDMI_8T49N241_INT_ALM
+				 * 2 - MAX6643_OT_B
+				 * 3 - MAX6643_FANFAIL_B
+				 * 5 - IIC_MUX_RESET_B
+				 * 6 - GEM3_EXP_RESET_B
+				 * 7 - FMC_LPC_PRSNT_M2C_B
+				 * 4, 10 - 17 - not connected
+				 */
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+		/* 3, 6 not connected */
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
new file mode 100644
index 000000000..b273bd1d9
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU104 RevC";
+	compatible = "xlnx,zynqmp-zcu104-revC", "xlnx,zynqmp-zcu104", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u183 0>, <&u183 1>, <&u183 2>, <&u183 3>;
+	};
+
+	clock_8t49n287_5: clk125 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clock_8t49n287_2: clk26 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clock_8t49n287_3: clk27 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - IRPS5401_ALERT_B
+		 * 1 - HDMI_8T49N241_INT_ALM
+		 * 2 - MAX6643_OT_B
+		 * 3 - MAX6643_FANFAIL_B
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 7 - FMC_LPC_PRSNT_M2C_B
+		 * 4, 10 - 17 - not connected
+		 */
+	};
+
+	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* 8T49N287 - u182 */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u175 */
+				compatible = "infineon,irps5401";
+				reg = <0x43>; /* pmbus / i2c 0x13 */
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u180 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>; /* pmbus / i2c 0x14 */
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			u183: ina226@40 { /* u183 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+		/* 4, 6 not connected */
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* n25q512a 128MiB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&xilinx_ams {
+	status = "okay";
+};
+
+&ams_ps {
+	status = "okay";
+};
+
+&ams_pl {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
new file mode 100644
index 000000000..50c384aa2
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -0,0 +1,1053 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU106
+ *
+ * (C) Copyright 2016 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU106 RevA";
+	compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u76 {
+		compatible = "iio-hwmon";
+		io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u78 {
+		compatible = "iio-hwmon";
+		io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+	};
+	ina226-u87 {
+		compatible = "iio-hwmon";
+		io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+	};
+	ina226-u85 {
+		compatible = "iio-hwmon";
+		io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+	};
+	ina226-u86 {
+		compatible = "iio-hwmon";
+		io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+	};
+	ina226-u93 {
+		compatible = "iio-hwmon";
+		io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+	};
+	ina226-u88 {
+		compatible = "iio-hwmon";
+		io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+	};
+	ina226-u15 {
+		compatible = "iio-hwmon";
+		io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+	};
+	ina226-u92 {
+		compatible = "iio-hwmon";
+		io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+	ina226-u81 {
+		compatible = "iio-hwmon";
+		io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+	};
+	ina226-u80 {
+		compatible = "iio-hwmon";
+		io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+	};
+	ina226-u84 {
+		compatible = "iio-hwmon";
+		io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+	};
+	ina226-u16 {
+		compatible = "iio-hwmon";
+		io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u74 {
+		compatible = "iio-hwmon";
+		io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+	};
+	ina226-u75 {
+		compatible = "iio-hwmon";
+		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			reg = <0xc>;
+			compatible = "ethernet-phy-id2000.a231";
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u97 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u97: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - SFP_SI5328_INT_ALM
+		 * 1 - HDMI_SI5328_INT_ALM
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 10 - FMC_HPC0_PRSNT_M2C_B
+		 * 11 - FMC_HPC1_PRSNT_M2C_B
+		 * 2-4, 7, 12-17 - not connected
+		 */
+	};
+
+	tca6416_u61: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - VCCPSPLL_EN
+		 * 1 - MGTRAVCC_EN
+		 * 2 - MGTRAVTT_EN
+		 * 3 - VCCPSDDRPLL_EN
+		 * 4 - MIO26_PMU_INPUT_LS
+		 * 5 - PL_PMBUS_ALERT
+		 * 6 - PS_PMBUS_ALERT
+		 * 7 - MAXIM_PMBUS_ALERT
+		 * 10 - PL_DDR4_VTERM_EN
+		 * 11 - PL_DDR4_VPP_2V5_EN
+		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
+		 * 13 - PS_DIMM_SUSPEND_EN
+		 * 14 - PS_DDR4_VTERM_EN
+		 * 15 - PS_DDR4_VPP_2V5_EN
+		 * 16 - 17 - not connected
+		 */
+	};
+
+	i2c-mux@75 { /* u60 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			u76: ina226@40 { /* u76 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u76";
+				reg = <0x40>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@41 { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u78: ina226@42 { /* u78 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u78";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u87: ina226@43 { /* u87 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u87";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u85: ina226@44 { /* u85 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u85";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u86: ina226@45 { /* u86 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u86";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u93: ina226@46 { /* u93 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u93";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u88: ina226@47 { /* u88 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u88";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u15: ina226@4a { /* u15 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u15";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u92: ina226@4b { /* u92 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u92";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* PL_PMBUS */
+			u79: ina226@40 { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u81: ina226@41 { /* u81 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u81";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u80: ina226@42 { /* u80 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u80";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u84: ina226@43 { /* u84 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u84";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u16: ina226@44 { /* u16 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u16";
+				reg = <0x44>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@45 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u74: ina226@46 { /* u74 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u74";
+				reg = <0x46>;
+				shunt-resistor = <5000>;
+			};
+			u75: ina226@47 { /* u75 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u75";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* MAXIM_PMBUS - 00 */
+			max15301@a { /* u46 */
+				compatible = "maxim,max15301";
+				reg = <0xa>;
+			};
+			max15303@b { /* u4 */
+				compatible = "maxim,max15303";
+				reg = <0xb>;
+			};
+			max15303@10 { /* u13 */
+				compatible = "maxim,max15303";
+				reg = <0x10>;
+			};
+			max15301@13 { /* u47 */
+				compatible = "maxim,max15301";
+				reg = <0x13>;
+			};
+			max15303@14 { /* u7 */
+				compatible = "maxim,max15303";
+				reg = <0x14>;
+			};
+			max15303@15 { /* u6 */
+				compatible = "maxim,max15303";
+				reg = <0x15>;
+			};
+			max15303@16 { /* u10 */
+				compatible = "maxim,max15303";
+				reg = <0x16>;
+			};
+			max15303@17 { /* u9 */
+				compatible = "maxim,max15303";
+				reg = <0x17>;
+			};
+			max15301@18 { /* u63 */
+				compatible = "maxim,max15301";
+				reg = <0x18>;
+			};
+			max15303@1a { /* u49 */
+				compatible = "maxim,max15303";
+				reg = <0x1a>;
+			};
+			max15303@1b { /* u8 */
+				compatible = "maxim,max15303";
+				reg = <0x1b>;
+			};
+			max15303@1d { /* u18 */
+				compatible = "maxim,max15303";
+				reg = <0x1d>;
+			};
+
+			max20751@72 { /* u95 */
+				compatible = "maxim,max20751";
+				reg = <0x72>;
+			};
+			max20751@73 { /* u96 */
+				compatible = "maxim,max20751";
+				reg = <0x73>;
+			};
+		};
+		/* Bus 3 is not connected */
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	/* PL i2c via PCA9306 - u45 */
+	i2c-mux@74 { /* u34 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u23 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u69 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_7: out@7 {
+					/* refclk7 PL CLK74 */
+					reg = <7>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u42 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>; /* copy from zc702 */
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SI5328 - u20 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>; /* FAN controller */
+			temp@4c {/* lm96163 - u128 */
+				compatible = "national,lm96163";
+				reg = <0x4c>;
+			};
+		};
+		/* 6 - 7 unconnected */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u135 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* HPC0_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* HPC1_IIC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SEP 3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SEP 2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SEP 1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SEP 0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-wp {
+			groups = "sdio1_wp_0_grp";
+			function = "sdio1_wp";
+		};
+
+		conf-wp {
+			groups = "sdio1_wp_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO23", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, sata, usb3, dp */
+	clocks = <&si5341 0 3>, <&si5341 0 2>, <&si5341 0 0>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 1>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+	ports {
+		port@5 {
+			dpsub_dp_out: endpoint {
+				remote-endpoint = <&dpcon_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
new file mode 100644
index 000000000..617cb0405
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -0,0 +1,866 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU111
+ *
+ * (C) Copyright 2017 - 2022, Xilinx, Inc.
+ * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU111 RevA";
+	compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
+
+	aliases {
+		ethernet0 = &gem3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci1;
+		nvmem0 = &eeprom;
+		rtc0 = &rtc;
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+		usb0 = &usb0;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
+		/* Another 4GB connected to PL */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-19 {
+			label = "sw19";
+			gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_DOWN>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat-led {
+			label = "heartbeat";
+			gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	ina226-u67 {
+		compatible = "iio-hwmon";
+		io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
+	};
+	ina226-u59 {
+		compatible = "iio-hwmon";
+		io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
+	};
+	ina226-u61 {
+		compatible = "iio-hwmon";
+		io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
+	};
+	ina226-u60 {
+		compatible = "iio-hwmon";
+		io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
+	};
+	ina226-u64 {
+		compatible = "iio-hwmon";
+		io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
+	};
+	ina226-u69 {
+		compatible = "iio-hwmon";
+		io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
+	};
+	ina226-u66 {
+		compatible = "iio-hwmon";
+		io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
+	};
+	ina226-u65 {
+		compatible = "iio-hwmon";
+		io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+	};
+	ina226-u63 {
+		compatible = "iio-hwmon";
+		io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
+	};
+	ina226-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
+	};
+	ina226-u71 {
+		compatible = "iio-hwmon";
+		io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
+	};
+	ina226-u77 {
+		compatible = "iio-hwmon";
+		io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+	};
+	ina226-u73 {
+		compatible = "iio-hwmon";
+		io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
+	};
+	ina226-u79 {
+		compatible = "iio-hwmon";
+		io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+	};
+
+	/* 48MHz reference crystal */
+	ref48: ref48M {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&fpd_dma_chan1 {
+	status = "okay";
+};
+
+&fpd_dma_chan2 {
+	status = "okay";
+};
+
+&fpd_dma_chan3 {
+	status = "okay";
+};
+
+&fpd_dma_chan4 {
+	status = "okay";
+};
+
+&fpd_dma_chan5 {
+	status = "okay";
+};
+
+&fpd_dma_chan6 {
+	status = "okay";
+};
+
+&fpd_dma_chan7 {
+	status = "okay";
+};
+
+&fpd_dma_chan8 {
+	status = "okay";
+};
+
+&gem3 {
+	status = "okay";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@c {
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <0xc>;
+			ti,rx-internal-delay = <0x8>;
+			ti,tx-internal-delay = <0xa>;
+			ti,fifo-depth = <0x1>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-gpios = <&tca6416_u22 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_default>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	tca6416_u22: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller; /* interrupt not connected */
+		#gpio-cells = <2>;
+		/*
+		 * IRQ not connected
+		 * Lines:
+		 * 0 - MAX6643_OT_B
+		 * 1 - MAX6643_FANFAIL_B
+		 * 2 - MIO26_PMU_INPUT_LS
+		 * 4 - SFP_SI5382_INT_ALM
+		 * 5 - IIC_MUX_RESET_B
+		 * 6 - GEM3_EXP_RESET_B
+		 * 10 - FMCP_HSPC_PRSNT_M2C_B
+		 * 11 - CLK_SPI_MUX_SEL0
+		 * 12 - CLK_SPI_MUX_SEL1
+		 * 16 - IRPS5401_ALERT_B
+		 * 17 - INA226_PMBUS_ALERT
+		 * 3, 7, 13-15 - not connected
+		 */
+	};
+
+	i2c-mux@75 { /* u23 */
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* PS_PMBUS */
+			/* PMBUS_ALERT done via pca9544 */
+			u67: ina226@40 { /* u67 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u67";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+			u59: ina226@41 { /* u59 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u59";
+				reg = <0x41>;
+				shunt-resistor = <5000>;
+			};
+			u61: ina226@42 { /* u61 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u61";
+				reg = <0x42>;
+				shunt-resistor = <5000>;
+			};
+			u60: ina226@43 { /* u60 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u60";
+				reg = <0x43>;
+				shunt-resistor = <5000>;
+			};
+			u64: ina226@45 { /* u64 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u64";
+				reg = <0x45>;
+				shunt-resistor = <5000>;
+			};
+			u69: ina226@46 { /* u69 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u69";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+			u66: ina226@47 { /* u66 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u66";
+				reg = <0x47>;
+				shunt-resistor = <5000>;
+			};
+			u65: ina226@48 { /* u65 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u65";
+				reg = <0x48>;
+				shunt-resistor = <5000>;
+			};
+			u63: ina226@49 { /* u63 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u63";
+				reg = <0x49>;
+				shunt-resistor = <5000>;
+			};
+			u3: ina226@4a { /* u3 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u3";
+				reg = <0x4a>;
+				shunt-resistor = <5000>;
+			};
+			u71: ina226@4b { /* u71 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u71";
+				reg = <0x4b>;
+				shunt-resistor = <5000>;
+			};
+			u77: ina226@4c { /* u77 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u77";
+				reg = <0x4c>;
+				shunt-resistor = <5000>;
+			};
+			u73: ina226@4d { /* u73 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u73";
+				reg = <0x4d>;
+				shunt-resistor = <5000>;
+			};
+			u79: ina226@4e { /* u79 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				label = "ina226-u79";
+				reg = <0x4e>;
+				shunt-resistor = <5000>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			irps5401_43: irps5401@43 { /* IRPS5401 - u53 check these */
+				compatible = "infineon,irps5401";
+				reg = <0x43>;
+			};
+			irps5401_44: irps5401@44 { /* IRPS5401 - u55 */
+				compatible = "infineon,irps5401";
+				reg = <0x44>;
+			};
+			irps5401_45: irps5401@45 { /* IRPS5401 - u57 */
+				compatible = "infineon,irps5401";
+				reg = <0x45>;
+			};
+			/* u68 IR38064 +0 */
+			/* u70 IR38060 +1 */
+			/* u74 IR38060 +2 */
+			/* u75 IR38060 +6 */
+			/* J19 header too */
+
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* SYSMON */
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	i2c-mux@74 { /* u26 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/*
+			 * IIC_EEPROM 1kB memory which uses 256B blocks
+			 * where every block has different address.
+			 *    0 - 256B address 0x54
+			 * 256B - 512B address 0x55
+			 * 512B - 768B address 0x56
+			 * 768B - 1024B address 0x57
+			 */
+			eeprom: eeprom@54 { /* u88 */
+				compatible = "atmel,24c08";
+				reg = <0x54>;
+			};
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			si5341: clock-generator@36 { /* SI5341 - u46 */
+				compatible = "silabs,si5341";
+				reg = <0x36>;
+				#clock-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&ref48>;
+				clock-names = "xtal";
+				clock-output-names = "si5341";
+
+				si5341_0: out@0 {
+					/* refclk0 for PS-GT, used for DP */
+					reg = <0>;
+					always-on;
+				};
+				si5341_2: out@2 {
+					/* refclk2 for PS-GT, used for USB3 */
+					reg = <2>;
+					always-on;
+				};
+				si5341_3: out@3 {
+					/* refclk3 for PS-GT, used for SATA */
+					reg = <3>;
+					always-on;
+				};
+				si5341_5: out@5 {
+					/* refclk5 PL CLK100 */
+					reg = <5>;
+					always-on;
+				};
+				si5341_6: out@6 {
+					/* refclk6 PL CLK125 */
+					reg = <6>;
+					always-on;
+				};
+				si5341_9: out@9 {
+					/* refclk9 used for PS_REF_CLK 33.3 MHz */
+					reg = <9>;
+					always-on;
+				};
+			};
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			si570_1: clock-generator@5d { /* USER SI570 - u47 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <300000000>;
+				clock-frequency = <300000000>;
+				clock-output-names = "si570_user";
+			};
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				reg = <0x5d>;
+				temperature-stability = <50>;
+				factory-fout = <156250000>;
+				clock-frequency = <156250000>;
+				clock-output-names = "si570_mgt";
+			};
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SI5382 - u48 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+				sc18is603@2f { /* sc18is602 - u93 */
+					compatible = "nxp,sc18is603";
+					reg = <0x2f>;
+					/* 4 gpios for CS not handled by driver */
+					/*
+					 * USB2ANY cable or
+					 * LMK04208 - u90 or
+					 * LMX2594 - u102 or
+					 * LMX2594 - u103 or
+					 * LMX2594 - u104
+					 */
+				};
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* FMC connector */
+		};
+		/* 7 NC */
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548"; /* u27 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			/* FMCP_HSPC_IIC */
+		};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			/* NC */
+		};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			/* SYSMON */
+		};
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			/* DDR4 SODIMM */
+		};
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			/* SFP3 */
+		};
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* SFP2 */
+		};
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/* SFP1 */
+		};
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/* SFP0 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_3_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_3_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c0_gpio: i2c0-gpio {
+		mux {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_14_grp", "gpio0_15_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_gpio_default: gpio-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+		};
+
+		conf {
+			groups = "gpio0_22_grp", "gpio0_23_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-msp {
+			function = "gpio0";
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+		};
+
+		conf-msp {
+			groups = "gpio0_13_grp", "gpio0_38_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-pull-up {
+			pins = "MIO22";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO13", "MIO23", "MIO38";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* nc, dp, usb3, sata */
+	clocks = <&si5341 0 0>, <&si5341 0 2>, <&si5341 0 3>;
+	clock-names = "ref1", "ref2", "ref3";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor"; /* 16MB + 16MB */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
+		spi-max-frequency = <108000000>; /* Based on DC1 spec */
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	/* SATA OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
+	ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
+	ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+	phy-names = "sata-phy";
+	phys = <&psgtr 3 PHY_TYPE_SATA 1 3>;
+};
+
+/* SD1 with level shifter */
+&sdhci1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	disable-wp;
+	/*
+	 * This property should be removed for supporting UHS mode
+	 */
+	no-1-8-v;
+	xlnx,mio-bank = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
new file mode 100644
index 000000000..c406017b0
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu1275-revA.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZC1275
+ *
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ * Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+
+/ {
+	model = "ZynqMP ZCU1275 RevA";
+	compatible = "xlnx,zynqmp-zcu1275-revA", "xlnx,zynqmp-zcu1275", "xlnx,zynqmp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &dcc;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
new file mode 100644
index 000000000..b61fc99cd
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/xlnx-zynqmp-power.h>
+#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+/ {
+	compatible = "xlnx,zynqmp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table>;
+			reg = <0x0>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+			operating-points-v2 = <&cpu_opp_table>;
+			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x40000000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <600>;
+				min-residency-us = <10000>;
+			};
+		};
+	};
+
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp00 {
+			opp-hz = /bits/ 64 <1199999988>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <599999994>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <399999996>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <299999997>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <500000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rproc_0_fw_image: memory@3ed00000 {
+			no-map;
+			reg = <0x0 0x3ed00000 0x0 0x40000>;
+		};
+
+		rproc_1_fw_image: memory@3ef00000 {
+			no-map;
+			reg = <0x0 0x3ef00000 0x0 0x40000>;
+		};
+	};
+
+	zynqmp_ipi: zynqmp_ipi {
+		bootph-all;
+		compatible = "xlnx,zynqmp-ipi-mailbox";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		xlnx,ipi-id = <0>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipi_mailbox_pmu1: mailbox@ff9905c0 {
+			bootph-all;
+			reg = <0x0 0xff9905c0 0x0 0x20>,
+			      <0x0 0xff9905e0 0x0 0x20>,
+			      <0x0 0xff990e80 0x0 0x20>,
+			      <0x0 0xff990ea0 0x0 0x20>;
+			reg-names = "local_request_region",
+				    "local_response_region",
+				    "remote_request_region",
+				    "remote_response_region";
+			#mbox-cells = <1>;
+			xlnx,ipi-id = <4>;
+		};
+	};
+
+	dcc: dcc {
+		compatible = "arm,dcc";
+		status = "disabled";
+		bootph-all;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	firmware {
+		zynqmp_firmware: zynqmp-firmware {
+			compatible = "xlnx,zynqmp-firmware";
+			#power-domain-cells = <1>;
+			method = "smc";
+			bootph-all;
+
+			zynqmp_power: zynqmp-power {
+				bootph-all;
+				compatible = "xlnx,zynqmp-power";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
+				mbox-names = "tx", "rx";
+			};
+
+			nvmem_firmware {
+				compatible = "xlnx,zynqmp-nvmem-fw";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				soc_revision: soc_revision@0 {
+					reg = <0x0 0x4>;
+				};
+			};
+
+			zynqmp_pcap: pcap {
+				compatible = "xlnx,zynqmp-pcap-fpga";
+			};
+
+			xlnx_aes: zynqmp-aes {
+				compatible = "xlnx,zynqmp-aes";
+			};
+
+			zynqmp_reset: reset-controller {
+				compatible = "xlnx,zynqmp-reset";
+				#reset-cells = <1>;
+			};
+
+			pinctrl0: pinctrl {
+				compatible = "xlnx,zynqmp-pinctrl";
+				status = "disabled";
+			};
+
+			modepin_gpio: gpio {
+				compatible = "xlnx,zynqmp-gpio-modepin";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fpga_full: fpga-full {
+		compatible = "fpga-region";
+		fpga-mgr = <&zynqmp_pcap>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+
+	remoteproc {
+		compatible = "xlnx,zynqmp-r5fss";
+		xlnx,cluster-mode = <1>;
+
+		r5f-0 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_0>;
+			memory-region = <&rproc_0_fw_image>;
+		};
+
+		r5f-1 {
+			compatible = "xlnx,zynqmp-r5f";
+			power-domains = <&zynqmp_firmware PD_RPU_1>;
+			memory-region = <&rproc_1_fw_image>;
+		};
+	};
+
+	amba: axi {
+		compatible = "simple-bus";
+		bootph-all;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		can0: can@ff060000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clock-names = "can_clk", "pclk";
+			reg = <0x0 0xff060000 0x0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_0>;
+		};
+
+		can1: can@ff070000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clock-names = "can_clk", "pclk";
+			reg = <0x0 0xff070000 0x0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+			power-domains = <&zynqmp_firmware PD_CAN_1>;
+		};
+
+		cci: cci@fd6e0000 {
+			compatible = "arm,cci-400";
+			status = "disabled";
+			reg = <0x0 0xfd6e0000 0x0 0x9000>;
+			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pmu@9000 {
+				compatible = "arm,cci-400-pmu,r1";
+				reg = <0x9000 0x5000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		/* GDMA */
+		fpd_dma_chan1: dma-controller@fd500000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd500000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14e8>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan2: dma-controller@fd510000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd510000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14e9>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan3: dma-controller@fd520000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd520000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ea>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan4: dma-controller@fd530000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd530000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14eb>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan5: dma-controller@fd540000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd540000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ec>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan6: dma-controller@fd550000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd550000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ed>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan7: dma-controller@fd560000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd560000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ee>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		fpd_dma_chan8: dma-controller@fd570000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd570000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <128>;
+			iommus = <&smmu 0x14ef>;
+			power-domains = <&zynqmp_firmware PD_GDMA>;
+		};
+
+		gic: interrupt-controller@f9010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			reg = <0x0 0xf9010000 0x0 0x10000>,
+			      <0x0 0xf9020000 0x0 0x20000>,
+			      <0x0 0xf9040000 0x0 0x20000>,
+			      <0x0 0xf9060000 0x0 0x20000>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		gpu: gpu@fd4b0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-mali", "arm,mali-400";
+			reg = <0x0 0xfd4b0000 0x0 0x10000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1";
+			clock-names = "bus", "core";
+			power-domains = <&zynqmp_firmware PD_GPU>;
+		};
+
+		/* LPDDMA default allows only secured access. inorder to enable
+		 * These dma channels, Users should ensure that these dma
+		 * Channels are allowed for non secure access.
+		 */
+		lpd_dma_chan1: dma-controller@ffa80000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x868>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan2: dma-controller@ffa90000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa90000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x869>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan3: dma-controller@ffaa0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaa0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86a>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan4: dma-controller@ffab0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffab0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86b>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan5: dma-controller@ffac0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffac0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86c>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan6: dma-controller@ffad0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffad0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86d>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan7: dma-controller@ffae0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffae0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86e>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		lpd_dma_chan8: dma-controller@ffaf0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaf0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
+			xlnx,bus-width = <64>;
+			iommus = <&smmu 0x86f>;
+			power-domains = <&zynqmp_firmware PD_ADMA>;
+		};
+
+		mc: memory-controller@fd070000 {
+			compatible = "xlnx,zynqmp-ddrc-2.40a";
+			reg = <0x0 0xfd070000 0x0 0x30000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand0: nand-controller@ff100000 {
+			compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
+			status = "disabled";
+			reg = <0x0 0xff100000 0x0 0x1000>;
+			clock-names = "controller", "bus";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x872>;
+			power-domains = <&zynqmp_firmware PD_NAND>;
+		};
+
+		gem0: ethernet@ff0b0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0b0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x874>;
+			power-domains = <&zynqmp_firmware PD_ETH_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
+			reset-names = "gem0_rst";
+		};
+
+		gem1: ethernet@ff0c0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0c0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x875>;
+			power-domains = <&zynqmp_firmware PD_ETH_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+			reset-names = "gem1_rst";
+		};
+
+		gem2: ethernet@ff0d0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0d0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x876>;
+			power-domains = <&zynqmp_firmware PD_ETH_2>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
+			reset-names = "gem2_rst";
+		};
+
+		gem3: ethernet@ff0e0000 {
+			compatible = "xlnx,zynqmp-gem", "cdns,gem";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff0e0000 0x0 0x1000>;
+			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x877>;
+			power-domains = <&zynqmp_firmware PD_ETH_3>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
+			reset-names = "gem3_rst";
+		};
+
+		gpio: gpio@ff0a0000 {
+			compatible = "xlnx,zynqmp-gpio-1.0";
+			status = "disabled";
+			#gpio-cells = <0x2>;
+			gpio-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0xff0a0000 0x0 0x1000>;
+			power-domains = <&zynqmp_firmware PD_GPIO>;
+		};
+
+		i2c0: i2c@ff020000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			reg = <0x0 0xff020000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_0>;
+		};
+
+		i2c1: i2c@ff030000 {
+			compatible = "cdns,i2c-r1p14";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			reg = <0x0 0xff030000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_I2C_1>;
+		};
+
+		pcie: pcie@fd0e0000 {
+			compatible = "xlnx,nwl-pcie-2.11";
+			status = "disabled";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			msi-controller;
+			device_type = "pci";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,	/* MSI_1 [63...32] */
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;	/* MSI_0 [31...0] */
+			interrupt-names = "misc", "dummy", "intx",
+					  "msi1", "msi0";
+			msi-parent = <&pcie>;
+			reg = <0x0 0xfd0e0000 0x0 0x1000>,
+			      <0x0 0xfd480000 0x0 0x1000>,
+			      <0x80 0x00000000 0x0 0x1000000>;
+			reg-names = "breg", "pcireg", "cfg";
+			ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */
+				 <0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
+			bus-range = <0x00 0xff>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+			iommus = <&smmu 0x4d0>;
+			power-domains = <&zynqmp_firmware PD_PCIE>;
+			pcie_intc: legacy-interrupt-controller {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		qspi: spi@ff0f0000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-qspi-1.0";
+			status = "disabled";
+			clock-names = "ref_clk", "pclk";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			num-cs = <1>;
+			reg = <0x0 0xff0f0000 0x0 0x1000>,
+			      <0x0 0xc0000000 0x0 0x8000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			iommus = <&smmu 0x873>;
+			power-domains = <&zynqmp_firmware PD_QSPI>;
+		};
+
+		psgtr: phy@fd400000 {
+			compatible = "xlnx,zynqmp-psgtr-v1.1";
+			status = "disabled";
+			reg = <0x0 0xfd400000 0x0 0x40000>,
+			      <0x0 0xfd3d0000 0x0 0x1000>;
+			reg-names = "serdes", "siou";
+			#phy-cells = <4>;
+		};
+
+		rtc: rtc@ffa60000 {
+			compatible = "xlnx,zynqmp-rtc";
+			status = "disabled";
+			reg = <0x0 0xffa60000 0x0 0x100>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "alarm", "sec";
+			calibration = <0x7FFF>;
+		};
+
+		sata: ahci@fd0c0000 {
+			compatible = "ceva,ahci-1v84";
+			status = "disabled";
+			reg = <0x0 0xfd0c0000 0x0 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&zynqmp_firmware PD_SATA>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+			iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
+				 <&smmu 0x4c2>, <&smmu 0x4c3>;
+		};
+
+		sdhci0: mmc@ff160000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff160000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			iommus = <&smmu 0x870>;
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd0", "clk_in_sd0";
+			power-domains = <&zynqmp_firmware PD_SD_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SDIO0>;
+		};
+
+		sdhci1: mmc@ff170000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff170000 0x0 0x1000>;
+			clock-names = "clk_xin", "clk_ahb";
+			iommus = <&smmu 0x871>;
+			#clock-cells = <1>;
+			clock-output-names = "clk_out_sd1", "clk_in_sd1";
+			power-domains = <&zynqmp_firmware PD_SD_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SDIO1>;
+		};
+
+		smmu: iommu@fd800000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0xfd800000 0x0 0x20000>;
+			#iommu-cells = <1>;
+			status = "disabled";
+			#global-interrupts = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spi0: spi@ff040000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff040000 0x0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_0>;
+		};
+
+		spi1: spi@ff050000 {
+			compatible = "cdns,spi-r1p6";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff050000 0x0 0x1000>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			power-domains = <&zynqmp_firmware PD_SPI_1>;
+		};
+
+		ttc0: timer@ff110000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff110000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_0>;
+		};
+
+		ttc1: timer@ff120000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff120000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_1>;
+		};
+
+		ttc2: timer@ff130000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff130000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_2>;
+		};
+
+		ttc3: timer@ff140000 {
+			compatible = "cdns,ttc";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff140000 0x0 0x1000>;
+			timer-width = <32>;
+			power-domains = <&zynqmp_firmware PD_TTC_3>;
+		};
+
+		uart0: serial@ff000000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff000000 0x0 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_0>;
+		};
+
+		uart1: serial@ff010000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xff010000 0x0 0x1000>;
+			clock-names = "uart_clk", "pclk";
+			power-domains = <&zynqmp_firmware PD_UART_1>;
+		};
+
+		usb0: usb@ff9d0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9d0000 0x0 0x100>;
+			power-domains = <&zynqmp_firmware PD_USB_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
+			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>;
+			ranges;
+
+			dwc3_0: usb@fe200000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xfe200000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupt-names = "host", "peripheral", "otg";
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "bus_early", "ref";
+				iommus = <&smmu 0x860>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
+				/* dma-coherent; */
+			};
+		};
+
+		usb1: usb@ff9e0000 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dwc3";
+			reg = <0x0 0xff9e0000 0x0 0x100>;
+			power-domains = <&zynqmp_firmware PD_USB_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+			reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
+			ranges;
+
+			dwc3_1: usb@fe300000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xfe300000 0x0 0x40000>;
+				interrupt-parent = <&gic>;
+				interrupt-names = "host", "peripheral", "otg";
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "bus_early", "ref";
+				iommus = <&smmu 0x861>;
+				snps,quirk-frame-length-adjustment = <0x20>;
+				snps,resume-hs-terminations;
+				/* dma-coherent; */
+			};
+		};
+
+		watchdog0: watchdog@fd4d0000 {
+			compatible = "cdns,wdt-r1p2";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0xfd4d0000 0x0 0x1000>;
+			timeout-sec = <60>;
+			reset-on-timeout;
+		};
+
+		lpd_watchdog: watchdog@ff150000 {
+			compatible = "cdns,wdt-r1p2";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+			reg = <0x0 0xff150000 0x0 0x1000>;
+			timeout-sec = <10>;
+		};
+
+		xilinx_ams: ams@ffa50000 {
+			compatible = "xlnx,zynqmp-ams";
+			status = "disabled";
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xffa50000 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#io-channel-cells = <1>;
+			ranges = <0 0 0xffa50800 0x800>;
+
+			ams_ps: ams-ps@0 {
+				compatible = "xlnx,zynqmp-ams-ps";
+				status = "disabled";
+				reg = <0x0 0x400>;
+			};
+
+			ams_pl: ams-pl@400 {
+				compatible = "xlnx,zynqmp-ams-pl";
+				status = "disabled";
+				reg = <0x400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		zynqmp_dpdma: dma-controller@fd4c0000 {
+			compatible = "xlnx,zynqmp-dpdma";
+			status = "disabled";
+			reg = <0x0 0xfd4c0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			clock-names = "axi_clk";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			#dma-cells = <1>;
+		};
+
+		zynqmp_dpsub: display@fd4a0000 {
+			bootph-all;
+			compatible = "xlnx,zynqmp-dpsub-1.7";
+			status = "disabled";
+			reg = <0x0 0xfd4a0000 0x0 0x1000>,
+			      <0x0 0xfd4aa000 0x0 0x1000>,
+			      <0x0 0xfd4ab000 0x0 0x1000>,
+			      <0x0 0xfd4ac000 0x0 0x1000>;
+			reg-names = "dp", "blend", "av_buf", "aud";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			clock-names = "dp_apb_clk", "dp_aud_clk",
+				      "dp_vtc_pixel_clk_in";
+			power-domains = <&zynqmp_firmware PD_DP>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
+			dma-names = "vid0", "vid1", "vid2", "gfx0";
+			dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
+			       <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+				port@3 {
+					reg = <3>;
+				};
+				port@4 {
+					reg = <4>;
+				};
+				port@5 {
+					reg = <5>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
new file mode 100755
index 000000000..9b7a09808
--- /dev/null
+++ b/arch/arm64/boot/install.sh
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+# Adapted from code in arch/i386/boot/install.sh by Russell King
+#
+# "make install" script for the AArch64 Linux port
+#
+# Arguments:
+#   $1 - kernel version
+#   $2 - kernel image file
+#   $3 - kernel map file
+#   $4 - default install path (blank if root directory)
+
+if [ "$(basename $2)" = "Image.gz" ] || [ "$(basename $2)" = "vmlinuz.efi" ]
+then
+# Compressed install
+  echo "Installing compressed kernel"
+  base=vmlinuz
+else
+# Normal install
+  echo "Installing normal kernel"
+  base=vmlinux
+fi
+
+if [ -f $4/$base-$1 ]; then
+  mv $4/$base-$1 $4/$base-$1.old
+fi
+cat $2 > $4/$base-$1
+
+# Install system map file
+if [ -f $4/System.map-$1 ]; then
+  mv $4/System.map-$1 $4/System.map-$1.old
+fi
+cp $3 $4/System.map-$1
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
new file mode 100644
index 000000000..a789119e6
--- /dev/null
+++ b/arch/arm64/configs/defconfig
@@ -0,0 +1,1586 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
+CONFIG_PREEMPT=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_ARCH_ACTIONS=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_APPLE=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BCMBCA=y
+CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_SPARX5=y
+CONFIG_ARCH_K3=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_KEEMBAY=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NXP=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_MXC=y
+CONFIG_ARCH_S32=y
+CONFIG_ARCH_MA35=y
+CONFIG_ARCH_NPCM=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_REALTEK=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARCH_SYNQUACER=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_TESLA_FSD=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VISCONTI=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+CONFIG_NUMA=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
+CONFIG_CRASH_DUMP=y
+CONFIG_XEN=y
+CONFIG_COMPAT=y
+CONFIG_RANDOMIZE_BASE=y
+CONFIG_HIBERNATION=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_ENERGY_MODEL=y
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPUFREQ_DT=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
+CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
+CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_IMX_CPUFREQ_DT=m
+CONFIG_ARM_MEDIATEK_CPUFREQ=y
+CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
+CONFIG_ARM_QCOM_CPUFREQ_HW=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
+CONFIG_ARM_SCMI_CPUFREQ=y
+CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_QORIQ_CPUFREQ=y
+CONFIG_ACPI=y
+CONFIG_ACPI_HOTPLUG_MEMORY=y
+CONFIG_ACPI_HMAT=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_EINJ=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_IOSCHED_BFQ=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_MEMORY_FAILURE=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IPV6=m
+CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_IP_VS=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=m
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBS=m
+CONFIG_NET_SCH_ETF=m
+CONFIG_NET_SCH_TAPRIO=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_GATE=m
+CONFIG_QRTR_SMD=m
+CONFIG_QRTR_TUN=m
+CONFIG_CAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
+CONFIG_BT=m
+CONFIG_BT_HIDP=m
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_DEBUGFS is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTUSB_MTK=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIUART_MRVL=y
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_QCOMSMD=m
+CONFIG_BT_NXPUART=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL=m
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_NFC=m
+CONFIG_NFC_NCI=m
+CONFIG_NFC_S3FWRN5_I2C=m
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_PASID=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCI_TEGRA=y
+CONFIG_PCIE_RCAR_HOST=y
+CONFIG_PCIE_RCAR_EP=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCIE_ALTERA=y
+CONFIG_PCIE_ALTERA_MSI=y
+CONFIG_PCI_HOST_THUNDER_PEM=y
+CONFIG_PCI_HOST_THUNDER_ECAM=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCIE_MEDIATEK_GEN3=m
+CONFIG_PCIE_BRCMSTB=m
+CONFIG_PCI_IMX6_HOST=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
+CONFIG_PCIE_KIRIN=y
+CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_TEGRA194_HOST=m
+CONFIG_PCIE_VISCONTI_HOST=y
+CONFIG_PCIE_LAYERSCAPE_GEN4=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_HISILICON_LPC=y
+CONFIG_TEGRA_ACONNECT=m
+CONFIG_MHI_BUS_PCI_GENERIC=m
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_INTEL_STRATIX10_SERVICE=y
+CONFIG_INTEL_STRATIX10_RSU=m
+CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_IMX_SCU=y
+CONFIG_IMX_SCU_PD=y
+CONFIG_GNSS=m
+CONFIG_GNSS_MTK_SERIAL=m
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_DENALI_DT=y
+CONFIG_MTD_NAND_MARVELL=y
+CONFIG_MTD_NAND_BRCMNAND=m
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_NAND_QCOM=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=m
+CONFIG_UBIFS_FS=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_NVME=m
+CONFIG_QCOM_COINCELL=m
+CONFIG_QCOM_FASTRPC=m
+CONFIG_BATTERY_QCOM_BATTMGR=m
+CONFIG_UCSI_PMIC_GLINK=m
+CONFIG_SRAM=y
+CONFIG_PCI_ENDPOINT_TEST=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_UACCE=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
+CONFIG_SCSI_HISI_SAS_PCI=y
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT3SAS=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_BRCM=m
+CONFIG_AHCI_DWC=m
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_TUN=y
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+CONFIG_MHI_NET=m
+CONFIG_NET_DSA_BCM_SF2=m
+CONFIG_NET_DSA_MSCC_FELIX=m
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_ATL1C=m
+CONFIG_BCMGENET=m
+CONFIG_BNX2X=m
+CONFIG_SYSTEMPORT=m
+CONFIG_MACB=y
+CONFIG_THUNDER_NIC_PF=y
+CONFIG_FEC=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_DPAA2_ETH=y
+CONFIG_FSL_ENETC=y
+CONFIG_FSL_ENETC_VF=y
+CONFIG_FSL_ENETC_QOS=y
+CONFIG_HIX5HD2_GMAC=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_HNS3=y
+CONFIG_HNS3_HCLGE=y
+CONFIG_HNS3_ENET=y
+CONFIG_E1000=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
+CONFIG_MVNETA=y
+CONFIG_MVPP2=y
+CONFIG_SKY2=y
+CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
+CONFIG_QCOM_EMAC=m
+CONFIG_RMNET=m
+CONFIG_R8169=m
+CONFIG_SH_ETH=y
+CONFIG_RAVB=y
+CONFIG_RENESAS_ETHER_SWITCH=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_SNI_AVE=y
+CONFIG_SNI_NETSEC=y
+CONFIG_STMMAC_ETH=m
+CONFIG_DWMAC_TEGRA=m
+CONFIG_TI_K3_AM65_CPSW_NUSS=y
+CONFIG_QCOM_IPA=m
+CONFIG_MESON_GXL_PHY=m
+CONFIG_AQUANTIA_PHY=y
+CONFIG_BCM54140_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_MARVELL_10G_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_MICROSEMI_PHY=y
+CONFIG_AT803X_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_ROCKCHIP_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_DP83869_PHY=m
+CONFIG_DP83TD510_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_RCAR=m
+CONFIG_CAN_RCAR_CANFD=m
+CONFIG_CAN_MCP251XFD=m
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_LAN78XX=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+CONFIG_ATH10K_SDIO=m
+CONFIG_ATH10K_SNOC=m
+CONFIG_WCN36XX=m
+CONFIG_ATH11K=m
+CONFIG_ATH11K_AHB=m
+CONFIG_ATH11K_PCI=m
+CONFIG_BRCMFMAC=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_PCIE=m
+CONFIG_MT7921E=m
+CONFIG_RSI_91X=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_WWAN=m
+CONFIG_MHI_WWAN_CTRL=m
+CONFIG_MHI_WWAN_MBIM=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_SNVS_PWRKEY=m
+CONFIG_KEYBOARD_IMX_SC_KEY=m
+CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_MTK_PMIC=m
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_GOODIX=m
+CONFIG_TOUCHSCREEN_ELAN=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_BBNSM_PWRKEY=m
+CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_PM8XXX_VIBRATOR=m
+CONFIG_INPUT_TPS65219_PWRBUTTON=m
+CONFIG_INPUT_PWM_BEEPER=m
+CONFIG_INPUT_PWM_VIBRA=m
+CONFIG_INPUT_RK805_PWRKEY=m
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_EM=y
+CONFIG_SERIAL_8250_OMAP=y
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_TEGRA_TCU=y
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SERIAL_QCOM_GENI=y
+CONFIG_SERIAL_QCOM_GENI_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_FSL_LINFLEXUART=y
+CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_OWL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_IPMI_HANDLER=m
+CONFIG_IPMI_DEVICE_INTERFACE=m
+CONFIG_IPMI_SI=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS=m
+CONFIG_TCG_TIS_SPI=m
+CONFIG_TCG_TIS_SPI_CR50=y
+CONFIG_TCG_TIS_I2C_CR50=m
+CONFIG_TCG_TIS_I2C_INFINEON=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=m
+CONFIG_I2C_CADENCE=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_IMX=y
+CONFIG_I2C_IMX_LPI2C=y
+CONFIG_I2C_MESON=y
+CONFIG_I2C_MT65XX=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_OMAP=y
+CONFIG_I2C_OWL=y
+CONFIG_I2C_PXA=y
+CONFIG_I2C_QCOM_CCI=m
+CONFIG_I2C_QCOM_GENI=m
+CONFIG_I2C_QUP=y
+CONFIG_I2C_RIIC=y
+CONFIG_I2C_RK3X=y
+CONFIG_I2C_RZV2M=m
+CONFIG_I2C_S3C2410=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER_F=y
+CONFIG_I2C_RCAR=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SPI=y
+CONFIG_SPI_ARMADA_3700=y
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_CADENCE_QUADSPI=y
+CONFIG_SPI_DESIGNWARE=m
+CONFIG_SPI_DW_DMA=y
+CONFIG_SPI_DW_MMIO=m
+CONFIG_SPI_FSL_LPSPI=y
+CONFIG_SPI_FSL_QUADSPI=y
+CONFIG_SPI_NXP_FLEXSPI=y
+CONFIG_SPI_IMX=m
+CONFIG_SPI_FSL_DSPI=y
+CONFIG_SPI_MESON_SPICC=m
+CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_MT65XX=y
+CONFIG_SPI_MTK_NOR=m
+CONFIG_SPI_OMAP24XX=m
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_ROCKCHIP_SFC=m
+CONFIG_SPI_RPCIF=m
+CONFIG_SPI_RSPI=m
+CONFIG_SPI_RZV2M_CSI=m
+CONFIG_SPI_QCOM_QSPI=m
+CONFIG_SPI_QUP=y
+CONFIG_SPI_QCOM_GENI=m
+CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SH_MSIOF=m
+CONFIG_SPI_SUN6I=y
+CONFIG_SPI_TEGRA210_QUAD=m
+CONFIG_SPI_TEGRA114=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPMI=y
+CONFIG_SPMI_MTK_PMIF=m
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_RK805=m
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_OWL=y
+CONFIG_PINCTRL_S700=y
+CONFIG_PINCTRL_S900=y
+CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
+CONFIG_PINCTRL_IMX8MQ=y
+CONFIG_PINCTRL_IMX8QM=y
+CONFIG_PINCTRL_IMX8QXP=y
+CONFIG_PINCTRL_IMX8DXL=y
+CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX93=y
+CONFIG_PINCTRL_MSM=y
+CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_IPQ5018=y
+CONFIG_PINCTRL_IPQ5332=y
+CONFIG_PINCTRL_IPQ6018=y
+CONFIG_PINCTRL_IPQ9574=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8953=y
+CONFIG_PINCTRL_MSM8976=y
+CONFIG_PINCTRL_MSM8994=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_MSM8998=y
+CONFIG_PINCTRL_QCM2290=y
+CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QDU1000=y
+CONFIG_PINCTRL_SA8775P=y
+CONFIG_PINCTRL_SC7180=y
+CONFIG_PINCTRL_SC7280=y
+CONFIG_PINCTRL_SC7280_LPASS_LPI=m
+CONFIG_PINCTRL_SC8180X=y
+CONFIG_PINCTRL_SC8280XP=y
+CONFIG_PINCTRL_SDM660=y
+CONFIG_PINCTRL_SDM670=y
+CONFIG_PINCTRL_SDM845=y
+CONFIG_PINCTRL_SM6115=y
+CONFIG_PINCTRL_SM6125=y
+CONFIG_PINCTRL_SM6350=y
+CONFIG_PINCTRL_SM6375=y
+CONFIG_PINCTRL_SM8150=y
+CONFIG_PINCTRL_SM8250=y
+CONFIG_PINCTRL_SM8250_LPASS_LPI=m
+CONFIG_PINCTRL_SM8350=y
+CONFIG_PINCTRL_SM8450=y
+CONFIG_PINCTRL_SM8450_LPASS_LPI=m
+CONFIG_PINCTRL_SC8280XP_LPASS_LPI=m
+CONFIG_PINCTRL_SM8550=y
+CONFIG_PINCTRL_SM8550_LPASS_LPI=m
+CONFIG_PINCTRL_LPASS_LPI=m
+CONFIG_GPIO_ALTERA=m
+CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_MB86S7X=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_MXC=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_UNIPHIER=y
+CONFIG_GPIO_VISCONTI=y
+CONFIG_GPIO_WCD934X=m
+CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_XGENE_SB=y
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_BD9571MWV=m
+CONFIG_GPIO_MAX77620=y
+CONFIG_GPIO_SL28CPLD=m
+CONFIG_GPIO_SYSCON=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_QCOM_PON=m
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_NVMEM_REBOOT_MODE=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_MT6360=m
+CONFIG_CHARGER_BQ25890=m
+CONFIG_CHARGER_BQ25980=m
+CONFIG_CHARGER_RK817=m
+CONFIG_SENSORS_ARM_SCMI=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_GPIO_FAN=m
+CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_PWM_FAN=m
+CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_SL28CPLD=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_SENSORS_INA3221=m
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+CONFIG_DEVFREQ_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_IMX_SC_THERMAL=m
+CONFIG_IMX8MM_THERMAL=m
+CONFIG_QORIQ_THERMAL=m
+CONFIG_K3_THERMAL=m
+CONFIG_SUN8I_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_RCAR_THERMAL=y
+CONFIG_RCAR_GEN3_THERMAL=y
+CONFIG_RZG2L_THERMAL=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_BCM2711_THERMAL=m
+CONFIG_BCM2835_THERMAL=m
+CONFIG_BRCMSTB_THERMAL=m
+CONFIG_EXYNOS_THERMAL=y
+CONFIG_TEGRA_SOCTHERM=m
+CONFIG_TEGRA_BPMP_THERMAL=m
+CONFIG_GENERIC_ADC_THERMAL=m
+CONFIG_QCOM_TSENS=y
+CONFIG_QCOM_SPMI_ADC_TM5=m
+CONFIG_QCOM_SPMI_TEMP_ALARM=m
+CONFIG_QCOM_LMH=m
+CONFIG_UNIPHIER_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_SL28CPLD_WATCHDOG=m
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_ARM_SBSA_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=m
+CONFIG_NPCM7XX_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_IMX_SC_WDT=m
+CONFIG_IMX7ULP_WDT=m
+CONFIG_QCOM_WDT=m
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+CONFIG_ARM_SMC_WATCHDOG=y
+CONFIG_RENESAS_WDT=y
+CONFIG_RENESAS_RZG2LWDT=y
+CONFIG_UNIPHIER_WATCHDOG=y
+CONFIG_PM8916_WATCHDOG=m
+CONFIG_BCM2835_WDT=y
+CONFIG_BCM7038_WDT=m
+CONFIG_K3_RTI_WATCHDOG=m
+CONFIG_MFD_ALTERA_SYSMGR=y
+CONFIG_MFD_BD9571MWV=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI6421_PMIC=y
+CONFIG_MFD_HI655X_PMIC=y
+CONFIG_MFD_MAX77620=y
+CONFIG_MFD_MT6360=y
+CONFIG_MFD_MT6397=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK8XX_I2C=y
+CONFIG_MFD_RK8XX_SPI=y
+CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SL28CPLD=y
+CONFIG_RZ_MTU3=y
+CONFIG_MFD_TPS65219=y
+CONFIG_MFD_TI_AM335X_TSCADC=m
+CONFIG_MFD_ROHM_BD718XX=y
+CONFIG_MFD_WCD934X=m
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_BD718XX=y
+CONFIG_REGULATOR_BD9571MWV=y
+CONFIG_REGULATOR_CROS_EC=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI6421V530=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_MAX77620=y
+CONFIG_REGULATOR_MAX8973=y
+CONFIG_REGULATOR_MP8859=y
+CONFIG_REGULATOR_MT6315=m
+CONFIG_REGULATOR_MT6357=y
+CONFIG_REGULATOR_MT6358=y
+CONFIG_REGULATOR_MT6359=y
+CONFIG_REGULATOR_MT6360=y
+CONFIG_REGULATOR_MT6397=y
+CONFIG_REGULATOR_PCA9450=y
+CONFIG_REGULATOR_PF8X00=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_RPMH=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RAA215300=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_REGULATOR_S2MPS11=y
+CONFIG_REGULATOR_TPS65132=m
+CONFIG_REGULATOR_TPS65219=y
+CONFIG_REGULATOR_VCTRL=m
+CONFIG_RC_CORE=m
+CONFIG_RC_DECODERS=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=m
+CONFIG_IR_MESON=m
+CONFIG_IR_SUNXI=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_SDR_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
+# CONFIG_DVB_NET is not set
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SDR_PLATFORM_DRIVERS=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_MEDIATEK_JPEG=m
+CONFIG_VIDEO_MEDIATEK_VCODEC=m
+CONFIG_VIDEO_IMX7_CSI=m
+CONFIG_VIDEO_IMX_MIPI_CSIS=m
+CONFIG_VIDEO_IMX8_ISI=m
+CONFIG_VIDEO_IMX8_ISI_M2M=y
+CONFIG_VIDEO_QCOM_CAMSS=m
+CONFIG_VIDEO_QCOM_VENUS=m
+CONFIG_VIDEO_RCAR_ISP=m
+CONFIG_VIDEO_RCAR_CSI2=m
+CONFIG_VIDEO_RCAR_VIN=m
+CONFIG_VIDEO_RZG2L_CSI2=m
+CONFIG_VIDEO_RZG2L_CRU=m
+CONFIG_VIDEO_RENESAS_FCP=m
+CONFIG_VIDEO_RENESAS_FDP1=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_VIDEO_RCAR_DRIF=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_HANTRO=m
+CONFIG_VIDEO_IMX219=m
+CONFIG_VIDEO_IMX412=m
+CONFIG_VIDEO_OV5640=m
+CONFIG_VIDEO_OV5645=m
+CONFIG_DRM=m
+CONFIG_DRM_I2C_NXP_TDA998X=m
+CONFIG_DRM_HDLCD=m
+CONFIG_DRM_MALI_DISPLAY=m
+CONFIG_DRM_KOMEDA=m
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS5433_DECON=y
+CONFIG_DRM_EXYNOS7_DECON=y
+CONFIG_DRM_EXYNOS_DSI=y
+# CONFIG_DRM_EXYNOS_DP is not set
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_EXYNOS_MIC=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_VOP2=y
+CONFIG_ROCKCHIP_ANALOGIX_DP=y
+CONFIG_ROCKCHIP_CDN_DP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_MIPI_DSI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
+CONFIG_ROCKCHIP_LVDS=y
+CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_DW_HDMI=m
+CONFIG_DRM_RCAR_MIPI_DSI=m
+CONFIG_DRM_RZG2L_MIPI_DSI=m
+CONFIG_DRM_SUN4I=m
+CONFIG_DRM_SUN6I_DSI=m
+CONFIG_DRM_SUN8I_DW_HDMI=m
+CONFIG_DRM_SUN8I_MIXER=m
+CONFIG_DRM_MSM=m
+CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
+CONFIG_DRM_PANEL_LVDS=m
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_EDP=m
+CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
+CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
+CONFIG_DRM_PANEL_SITRONIX_ST7703=m
+CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
+CONFIG_DRM_PANEL_VISIONOX_VTDR6130=m
+CONFIG_DRM_LONTIUM_LT8912B=m
+CONFIG_DRM_LONTIUM_LT9611=m
+CONFIG_DRM_LONTIUM_LT9611UXC=m
+CONFIG_DRM_ITE_IT66121=m
+CONFIG_DRM_NWL_MIPI_DSI=m
+CONFIG_DRM_PARADE_PS8640=m
+CONFIG_DRM_SII902X=m
+CONFIG_DRM_SIMPLE_BRIDGE=m
+CONFIG_DRM_THINE_THC63LVD1024=m
+CONFIG_DRM_TOSHIBA_TC358768=m
+CONFIG_DRM_TI_TFP410=m
+CONFIG_DRM_TI_SN65DSI83=m
+CONFIG_DRM_TI_SN65DSI86=m
+CONFIG_DRM_ANALOGIX_ANX7625=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7511_AUDIO=y
+CONFIG_DRM_CDNS_MHDP8546=m
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
+CONFIG_DRM_DW_HDMI_CEC=m
+CONFIG_DRM_IMX_DCSS=m
+CONFIG_DRM_V3D=m
+CONFIG_DRM_VC4=m
+CONFIG_DRM_ETNAVIV=m
+CONFIG_DRM_HISI_HIBMC=m
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MEDIATEK=m
+CONFIG_DRM_MEDIATEK_HDMI=m
+CONFIG_DRM_MXSFB=m
+CONFIG_DRM_MESON=m
+CONFIG_DRM_IMX_LCDIF=m
+CONFIG_DRM_PL111=m
+CONFIG_DRM_LIMA=m
+CONFIG_DRM_PANFROST=m
+CONFIG_DRM_TIDSS=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_ALOOP=m
+CONFIG_SND_HDA_TEGRA=m
+CONFIG_SND_HDA_CODEC_HDMI=m
+CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_SOC_FSL_ASRC=m
+CONFIG_SND_SOC_FSL_MICFIL=m
+CONFIG_SND_SOC_FSL_EASRC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_IMX_SGTL5000=m
+CONFIG_SND_SOC_IMX_SPDIF=m
+CONFIG_SND_SOC_FSL_ASOC_CARD=m
+CONFIG_SND_SOC_IMX_AUDMIX=m
+CONFIG_SND_SOC_MT8183=m
+CONFIG_SND_SOC_MT8183_MT6358_TS3A227E_MAX98357A=m
+CONFIG_SND_SOC_MT8183_DA7219_MAX98357A=m
+CONFIG_SND_SOC_MT8192=m
+CONFIG_SND_SOC_MT8192_MT6359_RT1015_RT5682=m
+CONFIG_SND_MESON_AXG_SOUND_CARD=m
+CONFIG_SND_MESON_GX_SOUND_CARD=m
+CONFIG_SND_SOC_QCOM=m
+CONFIG_SND_SOC_APQ8016_SBC=m
+CONFIG_SND_SOC_MSM8996=m
+CONFIG_SND_SOC_SDM845=m
+CONFIG_SND_SOC_SM8250=m
+CONFIG_SND_SOC_SC7180=m
+CONFIG_SND_SOC_SC7280=m
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_I2S_TDM=m
+CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
+CONFIG_SND_SOC_ROCKCHIP_RT5645=m
+CONFIG_SND_SOC_RK3399_GRU_SOUND=m
+CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SOC_RZ=m
+CONFIG_SND_SUN8I_CODEC=m
+CONFIG_SND_SUN8I_CODEC_ANALOG=m
+CONFIG_SND_SUN50I_CODEC_ANALOG=m
+CONFIG_SND_SUN4I_I2S=m
+CONFIG_SND_SUN4I_SPDIF=m
+CONFIG_SND_SOC_TEGRA=m
+CONFIG_SND_SOC_TEGRA210_AHUB=m
+CONFIG_SND_SOC_TEGRA210_DMIC=m
+CONFIG_SND_SOC_TEGRA210_I2S=m
+CONFIG_SND_SOC_TEGRA210_OPE=m
+CONFIG_SND_SOC_TEGRA186_ASRC=m
+CONFIG_SND_SOC_TEGRA186_DSPK=m
+CONFIG_SND_SOC_TEGRA210_ADMAIF=m
+CONFIG_SND_SOC_TEGRA210_MVC=m
+CONFIG_SND_SOC_TEGRA210_SFC=m
+CONFIG_SND_SOC_TEGRA210_AMX=m
+CONFIG_SND_SOC_TEGRA210_ADX=m
+CONFIG_SND_SOC_TEGRA210_MIXER=m
+CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD=m
+CONFIG_SND_SOC_DAVINCI_MCASP=m
+CONFIG_SND_SOC_AK4613=m
+CONFIG_SND_SOC_DA7213=m
+CONFIG_SND_SOC_ES7134=m
+CONFIG_SND_SOC_ES7241=m
+CONFIG_SND_SOC_ES8316=m
+CONFIG_SND_SOC_GTM601=m
+CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
+CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
+CONFIG_SND_SOC_PCM3168A_I2C=m
+CONFIG_SND_SOC_RK817=m
+CONFIG_SND_SOC_RT5640=m
+CONFIG_SND_SOC_J721E_EVM=m
+CONFIG_SND_SOC_RT5659=m
+CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
+CONFIG_SND_SOC_SIMPLE_MUX=m
+CONFIG_SND_SOC_TAS2552=m
+CONFIG_SND_SOC_TAS571X=m
+CONFIG_SND_SOC_TLV320AIC32X4_I2C=m
+CONFIG_SND_SOC_TLV320AIC3X_I2C=m
+CONFIG_SND_SOC_WCD9335=m
+CONFIG_SND_SOC_WCD934X=m
+CONFIG_SND_SOC_WM8524=m
+CONFIG_SND_SOC_WM8904=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8962=m
+CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SOC_WSA881X=m
+CONFIG_SND_SOC_NAU8822=m
+CONFIG_SND_SOC_LPASS_WSA_MACRO=m
+CONFIG_SND_SOC_LPASS_VA_MACRO=m
+CONFIG_SND_SOC_LPASS_RX_MACRO=m
+CONFIG_SND_SOC_LPASS_TX_MACRO=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD2=m
+CONFIG_HID_MULTITOUCH=m
+CONFIG_I2C_HID_ACPI=m
+CONFIG_I2C_HID_OF=m
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI_RENESAS=m
+CONFIG_USB_XHCI_RZV2M=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_BRCMSTB=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS_HCD=m
+CONFIG_USB_RENESAS_USBHS=m
+CONFIG_USB_ACM=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CDNS_SUPPORT=m
+CONFIG_USB_CDNS3=m
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_USB_MTU3=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_QCOM_EUD=m
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_ONBOARD_HUB=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_RZV2M_USB3DRD=y
+CONFIG_USB_RENESAS_USB3=m
+CONFIG_USB_TEGRA_XUDC=m
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_TYPEC=m
+CONFIG_TYPEC_TCPM=m
+CONFIG_TYPEC_TCPCI=m
+CONFIG_TYPEC_FUSB302=m
+CONFIG_TYPEC_TPS6598X=m
+CONFIG_TYPEC_HD3SS3220=m
+CONFIG_TYPEC_UCSI=m
+CONFIG_TYPEC_MUX_FSA4480=m
+CONFIG_UCSI_CCG=m
+CONFIG_TYPEC_MUX_GPIO_SBU=m
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_OF_DWCMSHC=y
+CONFIG_MMC_SDHCI_OF_SPARX5=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_F_SDH30=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MMC_SDHCI_MSM=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_UNIPHIER=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_HI3798CV200=y
+CONFIG_MMC_DW_K3=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_MTK=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MMC_OWL=y
+CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFS_BSG=y
+CONFIG_SCSI_UFSHCD_PLATFORM=y
+CONFIG_SCSI_UFS_CDNS_PLATFORM=m
+CONFIG_SCSI_UFS_QCOM=m
+CONFIG_SCSI_UFS_HISI=y
+CONFIG_SCSI_UFS_RENESAS=m
+CONFIG_SCSI_UFS_TI_J721E=m
+CONFIG_SCSI_UFS_EXYNOS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_MULTICOLOR=m
+CONFIG_LEDS_LM3692X=m
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_QCOM_LPG=m
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_EDAC=y
+CONFIG_EDAC_GHES=y
+CONFIG_EDAC_LAYERSCAPE=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_HYM8563=m
+CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_PCF85063=m
+CONFIG_RTC_DRV_PCF85363=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_BQ32K=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RV3028=m
+CONFIG_RTC_DRV_RV8803=m
+CONFIG_RTC_DRV_S5M=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_PCF2127=m
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_CROS_EC=y
+CONFIG_RTC_DRV_FSL_FTM_ALARM=m
+CONFIG_RTC_DRV_S3C=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_DRV_ARMADA38X=y
+CONFIG_RTC_DRV_PM8XXX=m
+CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_SNVS=m
+CONFIG_RTC_DRV_BBNSM=m
+CONFIG_RTC_DRV_IMX_SC=m
+CONFIG_RTC_DRV_MT6397=m
+CONFIG_RTC_DRV_XGENE=y
+CONFIG_RTC_DRV_TI_K3=m
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_SUN6I=m
+CONFIG_FSL_EDMA=y
+CONFIG_IMX_SDMA=m
+CONFIG_K3_DMA=y
+CONFIG_MV_XOR=y
+CONFIG_MV_XOR_V2=y
+CONFIG_OWL_DMA=y
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA186_GPC_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_TEGRA210_ADMA=m
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_GPI_DMA=m
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=m
+CONFIG_RZ_DMAC=y
+CONFIG_TI_K3_UDMA=y
+CONFIG_TI_K3_UDMA_GLUE_LAYER=y
+CONFIG_VFIO=y
+CONFIG_VFIO_PCI=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_VIDEO_MAX96712=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
+CONFIG_CROS_EC_I2C=y
+CONFIG_CROS_EC_RPMSG=m
+CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_EC_CHARDEV=m
+CONFIG_COMMON_CLK_RK808=y
+CONFIG_COMMON_CLK_SCMI=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_FSL_SAI=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_RS9_PCIE=y
+CONFIG_COMMON_CLK_VC5=y
+CONFIG_COMMON_CLK_BD718XX=m
+CONFIG_CLK_RASPBERRYPI=m
+CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
+CONFIG_CLK_IMX8QXP=y
+CONFIG_CLK_IMX8ULP=y
+CONFIG_CLK_IMX93=y
+CONFIG_TI_SCI_CLK=y
+CONFIG_COMMON_CLK_MT8192_AUDSYS=y
+CONFIG_COMMON_CLK_MT8192_CAMSYS=y
+CONFIG_COMMON_CLK_MT8192_IMGSYS=y
+CONFIG_COMMON_CLK_MT8192_IMP_IIC_WRAP=y
+CONFIG_COMMON_CLK_MT8192_IPESYS=y
+CONFIG_COMMON_CLK_MT8192_MDPSYS=y
+CONFIG_COMMON_CLK_MT8192_MFGCFG=y
+CONFIG_COMMON_CLK_MT8192_MMSYS=y
+CONFIG_COMMON_CLK_MT8192_MSDC=y
+CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
+CONFIG_COMMON_CLK_MT8192_VDECSYS=y
+CONFIG_COMMON_CLK_MT8192_VENCSYS=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_CLK_APCS_MSM8916=y
+CONFIG_QCOM_CLK_APCC_MSM8996=y
+CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_QCOM_CLK_RPMH=y
+CONFIG_IPQ_APSS_6018=y
+CONFIG_IPQ_GCC_5332=y
+CONFIG_IPQ_APSS_5018=y
+CONFIG_IPQ_GCC_5018=y
+CONFIG_IPQ_GCC_6018=y
+CONFIG_IPQ_GCC_8074=y
+CONFIG_IPQ_GCC_9574=y
+CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_GCC_8994=y
+CONFIG_MSM_GCC_8996=y
+CONFIG_MSM_MMCC_8994=m
+CONFIG_MSM_MMCC_8996=m
+CONFIG_MSM_MMCC_8998=m
+CONFIG_MSM_GCC_8998=y
+CONFIG_QCM_GCC_2290=y
+CONFIG_QCM_DISPCC_2290=m
+CONFIG_QCS_GCC_404=y
+CONFIG_SA_GCC_8775P=y
+CONFIG_SC_DISPCC_8280XP=m
+CONFIG_SA_GPUCC_8775P=m
+CONFIG_SC_GCC_7180=y
+CONFIG_SC_GCC_7280=y
+CONFIG_SC_GCC_8180X=y
+CONFIG_SC_GCC_8280XP=y
+CONFIG_SC_GPUCC_8280XP=m
+CONFIG_SC_LPASSCC_8280XP=m
+CONFIG_SDM_CAMCC_845=m
+CONFIG_SDM_GPUCC_845=y
+CONFIG_SDM_VIDEOCC_845=y
+CONFIG_SDM_DISPCC_845=y
+CONFIG_SDM_LPASSCC_845=m
+CONFIG_SM_CAMCC_8250=m
+CONFIG_SM_DISPCC_6115=m
+CONFIG_SM_DISPCC_8250=y
+CONFIG_SM_DISPCC_8450=m
+CONFIG_SM_DISPCC_8550=m
+CONFIG_SM_GCC_6115=y
+CONFIG_SM_GCC_8350=y
+CONFIG_SM_GCC_8450=y
+CONFIG_SM_GCC_8550=y
+CONFIG_SM_TCSRCC_8550=y
+CONFIG_SM_GPUCC_6115=m
+CONFIG_SM_GPUCC_8150=y
+CONFIG_SM_GPUCC_8250=y
+CONFIG_SM_VIDEOCC_8250=y
+CONFIG_QCOM_HFPLL=y
+CONFIG_CLK_GFM_LPASS_SM8250=m
+CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_TEGRA186_TIMER=y
+CONFIG_RENESAS_OSTM=y
+CONFIG_ARM_MHU=y
+CONFIG_IMX_MBOX=y
+CONFIG_OMAP2PLUS_MBOX=m
+CONFIG_PLATFORM_MHU=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_QCOM_IPCC=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_TEGRA_IOMMU_SMMU=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_V3=y
+CONFIG_MTK_IOMMU=y
+CONFIG_QCOM_IOMMU=y
+CONFIG_REMOTEPROC=y
+CONFIG_IMX_REMOTEPROC=y
+CONFIG_TI_K3_R5_REMOTEPROC=m
+CONFIG_TI_K3_DSP_REMOTEPROC=m
+CONFIG_MTK_SCP=m
+CONFIG_QCOM_Q6V5_ADSP=m
+CONFIG_QCOM_Q6V5_MSS=m
+CONFIG_QCOM_Q6V5_PAS=m
+CONFIG_QCOM_SYSMON=m
+CONFIG_QCOM_WCNSS_PIL=m
+CONFIG_RPMSG_CHAR=m
+CONFIG_RPMSG_CTRL=m
+CONFIG_RPMSG_QCOM_GLINK_RPM=y
+CONFIG_RPMSG_QCOM_GLINK_SMEM=m
+CONFIG_RPMSG_QCOM_SMD=y
+CONFIG_RPMSG_VIRTIO=y
+CONFIG_SOUNDWIRE=m
+CONFIG_SOUNDWIRE_QCOM=m
+CONFIG_OWL_PM_DOMAINS=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_MC_DPIO=y
+CONFIG_FSL_RCPM=y
+CONFIG_MTK_CMDQ=m
+CONFIG_MTK_DEVAPC=m
+CONFIG_MTK_PMIC_WRAP=y
+CONFIG_MTK_SVS=m
+CONFIG_QCOM_AOSS_QMP=y
+CONFIG_QCOM_COMMAND_DB=y
+CONFIG_QCOM_CPR=y
+CONFIG_QCOM_GENI_SE=y
+CONFIG_QCOM_LLCC=m
+CONFIG_QCOM_OCMEM=m
+CONFIG_QCOM_PMIC_GLINK=m
+CONFIG_QCOM_RMTFS_MEM=m
+CONFIG_QCOM_RPMH=y
+CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SOCINFO=m
+CONFIG_QCOM_SPM=m
+CONFIG_QCOM_STATS=m
+CONFIG_QCOM_WCNSS_CTRL=m
+CONFIG_QCOM_APR=m
+CONFIG_QCOM_ICC_BWMON=m
+CONFIG_ARCH_R8A77995=y
+CONFIG_ARCH_R8A77990=y
+CONFIG_ARCH_R8A77951=y
+CONFIG_ARCH_R8A77965=y
+CONFIG_ARCH_R8A77960=y
+CONFIG_ARCH_R8A77961=y
+CONFIG_ARCH_R8A779F0=y
+CONFIG_ARCH_R8A77980=y
+CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A779A0=y
+CONFIG_ARCH_R8A779G0=y
+CONFIG_ARCH_R8A774C0=y
+CONFIG_ARCH_R8A774E1=y
+CONFIG_ARCH_R8A774A1=y
+CONFIG_ARCH_R8A774B1=y
+CONFIG_ARCH_R9A07G043=y
+CONFIG_ARCH_R9A07G044=y
+CONFIG_ARCH_R9A07G054=y
+CONFIG_ARCH_R9A09G011=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_ARCH_TEGRA_186_SOC=y
+CONFIG_ARCH_TEGRA_194_SOC=y
+CONFIG_ARCH_TEGRA_234_SOC=y
+CONFIG_TI_SCI_PM_DOMAINS=y
+CONFIG_TI_PRUSS=m
+CONFIG_ARM_IMX_BUS_DEVFREQ=y
+CONFIG_ARM_IMX8M_DDRC_DEVFREQ=m
+CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=m
+CONFIG_EXTCON_PTN5150=m
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_EXTCON_USBC_CROS_EC=y
+CONFIG_RENESAS_RPCIF=m
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
+CONFIG_IMX93_ADC=m
+CONFIG_MAX9611=m
+CONFIG_MEDIATEK_MT6577_AUXADC=m
+CONFIG_QCOM_SPMI_VADC=m
+CONFIG_QCOM_SPMI_ADC5=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_RZG2L_ADC=m
+CONFIG_TI_ADS1015=m
+CONFIG_TI_AM335X_ADC=m
+CONFIG_IIO_CROS_EC_SENSORS_CORE=m
+CONFIG_IIO_CROS_EC_SENSORS=m
+CONFIG_IIO_ST_LSM6DSX=m
+CONFIG_IIO_CROS_EC_LIGHT_PROX=m
+CONFIG_SENSORS_ISL29018=m
+CONFIG_VCNL4000=m
+CONFIG_IIO_ST_MAGN_3AXIS=m
+CONFIG_IIO_CROS_EC_BARO=m
+CONFIG_MPL3115=m
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=m
+CONFIG_PWM_BRCMSTB=m
+CONFIG_PWM_CROS_EC=m
+CONFIG_PWM_IMX27=m
+CONFIG_PWM_MESON=m
+CONFIG_PWM_MTK_DISP=m
+CONFIG_PWM_MEDIATEK=m
+CONFIG_PWM_RCAR=m
+CONFIG_PWM_RENESAS_TPU=m
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_RZ_MTU3=m
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_SL28CPLD=m
+CONFIG_PWM_SUN4I=m
+CONFIG_PWM_TEGRA=m
+CONFIG_PWM_TIECAP=m
+CONFIG_PWM_TIEHRPWM=m
+CONFIG_PWM_VISCONTI=m
+CONFIG_SL28CPLD_INTC=y
+CONFIG_QCOM_PDC=y
+CONFIG_QCOM_MPM=y
+CONFIG_RESET_IMX7=y
+CONFIG_RESET_QCOM_AOSS=y
+CONFIG_RESET_QCOM_PDC=m
+CONFIG_RESET_RZG2L_USBPHY_CTRL=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_PHY_XGENE=y
+CONFIG_PHY_CAN_TRANSCEIVER=m
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_CADENCE_TORRENT=m
+CONFIG_PHY_CADENCE_SIERRA=m
+CONFIG_PHY_MIXEL_MIPI_DPHY=m
+CONFIG_PHY_FSL_IMX8M_PCIE=y
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_HISTB_COMBPHY=y
+CONFIG_PHY_HISI_INNO_USB2=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_PHY_QCOM_EDP=m
+CONFIG_PHY_QCOM_EUSB2_REPEATER=m
+CONFIG_PHY_QCOM_PCIE2=m
+CONFIG_PHY_QCOM_QMP=m
+CONFIG_PHY_QCOM_QUSB2=m
+CONFIG_PHY_QCOM_SNPS_EUSB2=m
+CONFIG_PHY_QCOM_USB_HS=m
+CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=m
+CONFIG_PHY_QCOM_USB_HS_28NM=m
+CONFIG_PHY_QCOM_USB_SS=m
+CONFIG_PHY_QCOM_SGMII_ETH=m
+CONFIG_PHY_R8A779F0_ETHERNET_SERDES=y
+CONFIG_PHY_RCAR_GEN3_PCIE=y
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_RCAR_GEN3_USB3=m
+CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
+CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=m
+CONFIG_PHY_ROCKCHIP_PCIE=m
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_PHY_SAMSUNG_UFS=y
+CONFIG_PHY_UNIPHIER_USB2=y
+CONFIG_PHY_UNIPHIER_USB3=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_AM654_SERDES=m
+CONFIG_PHY_J721E_WIZ=m
+CONFIG_ARM_CCI_PMU=m
+CONFIG_ARM_CCN=m
+CONFIG_ARM_CMN=m
+CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU=m
+CONFIG_ARM_SMMU_V3_PMU=m
+CONFIG_ARM_DSU_PMU=m
+CONFIG_FSL_IMX8_DDR_PMU=m
+CONFIG_QCOM_L2_PMU=y
+CONFIG_QCOM_L3_PMU=y
+CONFIG_ARM_SPE_PMU=m
+CONFIG_ARM_DMC620_PMU=m
+CONFIG_HISI_PMU=y
+CONFIG_NVMEM_LAYOUT_SL28_VPD=m
+CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_IMX_OCOTP_ELE=m
+CONFIG_NVMEM_IMX_OCOTP_SCU=y
+CONFIG_NVMEM_LAYERSCAPE_SFP=m
+CONFIG_NVMEM_MESON_EFUSE=m
+CONFIG_NVMEM_MTK_EFUSE=y
+CONFIG_NVMEM_QCOM_QFPROM=y
+CONFIG_NVMEM_RMEM=m
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+CONFIG_NVMEM_ROCKCHIP_OTP=y
+CONFIG_NVMEM_SNVS_LPGPR=y
+CONFIG_NVMEM_SPMI_SDAM=m
+CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_NVMEM_UNIPHIER_EFUSE=y
+CONFIG_FPGA=y
+CONFIG_FPGA_MGR_ALTERA_CVP=m
+CONFIG_FPGA_MGR_STRATIX10_SOC=m
+CONFIG_FPGA_BRIDGE=m
+CONFIG_ALTERA_FREEZE_BRIDGE=m
+CONFIG_FPGA_REGION=m
+CONFIG_OF_FPGA_REGION=m
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_MUX_GPIO=m
+CONFIG_MUX_MMIO=y
+CONFIG_SLIMBUS=m
+CONFIG_SLIM_QCOM_CTRL=m
+CONFIG_SLIM_QCOM_NGD_CTRL=m
+CONFIG_INTERCONNECT=y
+CONFIG_INTERCONNECT_IMX=y
+CONFIG_INTERCONNECT_IMX8MM=m
+CONFIG_INTERCONNECT_IMX8MN=m
+CONFIG_INTERCONNECT_IMX8MQ=m
+CONFIG_INTERCONNECT_IMX8MP=y
+CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_MSM8916=m
+CONFIG_INTERCONNECT_QCOM_MSM8996=m
+CONFIG_INTERCONNECT_QCOM_OSM_L3=m
+CONFIG_INTERCONNECT_QCOM_QCM2290=m
+CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_SA8775P=y
+CONFIG_INTERCONNECT_QCOM_SC7180=y
+CONFIG_INTERCONNECT_QCOM_SC7280=y
+CONFIG_INTERCONNECT_QCOM_SC8180X=y
+CONFIG_INTERCONNECT_QCOM_SC8280XP=y
+CONFIG_INTERCONNECT_QCOM_SDM845=y
+CONFIG_INTERCONNECT_QCOM_SM8150=m
+CONFIG_INTERCONNECT_QCOM_SM8250=m
+CONFIG_INTERCONNECT_QCOM_SM8350=m
+CONFIG_INTERCONNECT_QCOM_SM8450=y
+CONFIG_INTERCONNECT_QCOM_SM8550=y
+CONFIG_COUNTER=m
+CONFIG_RZ_MTU3_CNT=m
+CONFIG_HTE=y
+CONFIG_HTE_TEGRA194=y
+CONFIG_HTE_TEGRA194_TEST=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_9P_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_BS=m
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
+CONFIG_CRYPTO_DEV_SUN8I_CE=m
+CONFIG_CRYPTO_DEV_FSL_CAAM=m
+CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=m
+CONFIG_CRYPTO_DEV_QCE=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
+CONFIG_CRYPTO_DEV_CCREE=m
+CONFIG_CRYPTO_DEV_HISI_SEC2=m
+CONFIG_CRYPTO_DEV_HISI_ZIP=m
+CONFIG_CRYPTO_DEV_HISI_HPRE=m
+CONFIG_CRYPTO_DEV_HISI_TRNG=m
+CONFIG_CRYPTO_DEV_SA2UL=m
+CONFIG_DMA_RESTRICTED_POOL=y
+CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_CORESIGHT=m
+CONFIG_CORESIGHT_LINK_AND_SINK_TMC=m
+CONFIG_CORESIGHT_CATU=m
+CONFIG_CORESIGHT_SINK_TPIU=m
+CONFIG_CORESIGHT_SINK_ETBV10=m
+CONFIG_CORESIGHT_STM=m
+CONFIG_CORESIGHT_CPU_DEBUG=m
+CONFIG_CORESIGHT_CTI=m
+CONFIG_MEMTEST=y
diff --git a/arch/arm64/configs/virt.config b/arch/arm64/configs/virt.config
new file mode 100644
index 000000000..c47c36f8f
--- /dev/null
+++ b/arch/arm64/configs/virt.config
@@ -0,0 +1,61 @@
+# Help: Virtualization guest
+#
+# Base options for platforms
+#
+
+# CONFIG_ARCH_ACTIONS is not set
+# CONFIG_ARCH_SUNXI is not set
+# CONFIG_ARCH_ALPINE is not set
+# CONFIG_ARCH_APPLE is not set
+# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_BCMBCA is not set
+# CONFIG_ARCH_BCM_IPROC is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_BRCMSTB is not set
+# CONFIG_ARCH_EXYNOS is not set
+# CONFIG_ARCH_K3 is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_LG1K is not set
+# CONFIG_ARCH_HISI is not set
+# CONFIG_ARCH_KEEMBAY is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_NXP is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NPCM is not set
+# CONFIG_ARCH_QCOM is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_S32 is not set
+# CONFIG_ARCH_SEATTLE is not set
+# CONFIG_ARCH_INTEL_SOCFPGA is not set
+# CONFIG_ARCH_SYNQUACER is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_TESLA_FSD is not set
+# CONFIG_ARCH_SPRD is not set
+# CONFIG_ARCH_THUNDER is not set
+# CONFIG_ARCH_THUNDER2 is not set
+# CONFIG_ARCH_UNIPHIER is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_VISCONTI is not set
+# CONFIG_ARCH_XGENE is not set
+# CONFIG_ARCH_ZYNQMP is not set
+
+#
+# Subsystems which can't be used in mach-virt
+#
+# CONFIG_CHROME_PLATFORMS is not set
+# CONFIG_EXTCON is not set
+# CONFIG_IIO is not set
+# CONFIG_MTD is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_PWM is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_SLIMBUS is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUNDWIRE is not set
+# CONFIG_SPI is not set
+# CONFIG_SURFACE_PLATFORMS is not set
+# CONFIG_THERMAL is not set
diff --git a/arch/arm64/crypto/.gitignore b/arch/arm64/crypto/.gitignore
new file mode 100644
index 000000000..fcf2d731e
--- /dev/null
+++ b/arch/arm64/crypto/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+sha256-core.S
+sha512-core.S
+poly1305-core.S
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
new file mode 100644
index 000000000..6d06b448a
--- /dev/null
+++ b/arch/arm64/crypto/Kconfig
@@ -0,0 +1,327 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Accelerated Cryptographic Algorithms for CPU (arm64)"
+
+config CRYPTO_GHASH_ARM64_CE
+	tristate "Hash functions: GHASH (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_LIB_AES
+	select CRYPTO_LIB_GF128MUL
+	select CRYPTO_AEAD
+	help
+	  GCM GHASH function (NIST SP800-38D)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_NHPOLY1305_NEON
+	tristate "Hash functions: NHPoly1305 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_NHPOLY1305
+	help
+	  NHPoly1305 hash function (Adiantum)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_POLY1305_NEON
+	tristate "Hash functions: Poly1305 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_ARCH_HAVE_LIB_POLY1305
+	help
+	  Poly1305 authenticator algorithm (RFC7539)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SHA1_ARM64_CE
+	tristate "Hash functions: SHA-1 (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SHA1
+	help
+	  SHA-1 secure hash algorithm (FIPS 180)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_SHA256_ARM64
+	tristate "Hash functions: SHA-224 and SHA-256"
+	select CRYPTO_HASH
+	help
+	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm64
+
+config CRYPTO_SHA2_ARM64_CE
+	tristate "Hash functions: SHA-224 and SHA-256 (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SHA256_ARM64
+	help
+	  SHA-224 and SHA-256 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_SHA512_ARM64
+	tristate "Hash functions: SHA-384 and SHA-512"
+	select CRYPTO_HASH
+	help
+	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm64
+
+config CRYPTO_SHA512_ARM64_CE
+	tristate "Hash functions: SHA-384 and SHA-512 (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SHA512_ARM64
+	help
+	  SHA-384 and SHA-512 secure hash algorithms (FIPS 180)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_SHA3_ARM64
+	tristate "Hash functions: SHA-3 (ARMv8.2 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SHA3
+	help
+	  SHA-3 secure hash algorithms (FIPS 202)
+
+	  Architecture: arm64 using:
+	  - ARMv8.2 Crypto Extensions
+
+config CRYPTO_SM3_NEON
+	tristate "Hash functions: SM3 (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SM3
+	help
+	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SM3_ARM64_CE
+	tristate "Hash functions: SM3 (ARMv8.2 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_HASH
+	select CRYPTO_SM3
+	help
+	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
+
+	  Architecture: arm64 using:
+	  - ARMv8.2 Crypto Extensions
+
+config CRYPTO_POLYVAL_ARM64_CE
+	tristate "Hash functions: POLYVAL (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_POLYVAL
+	help
+	  POLYVAL hash function for HCTR2
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_AES_ARM64
+	tristate "Ciphers: AES, modes: ECB, CBC, CTR, CTS, XCTR, XTS"
+	select CRYPTO_AES
+	help
+	  Block ciphers: AES cipher algorithms (FIPS-197)
+	  Length-preserving ciphers: AES with ECB, CBC, CTR, CTS,
+	    XCTR, and XTS modes
+	  AEAD cipher: AES with CBC, ESSIV, and SHA-256
+	    for fscrypt and dm-crypt
+
+	  Architecture: arm64
+
+config CRYPTO_AES_ARM64_CE
+	tristate "Ciphers: AES (ARMv8 Crypto Extensions)"
+	depends on ARM64 && KERNEL_MODE_NEON
+	select CRYPTO_ALGAPI
+	select CRYPTO_LIB_AES
+	help
+	  Block ciphers: AES cipher algorithms (FIPS-197)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_AES_ARM64_CE_BLK
+	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_SKCIPHER
+	select CRYPTO_AES_ARM64_CE
+	help
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	  with block cipher modes:
+	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	  - CTR (Counter) mode (NIST SP800-38A)
+	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	    and IEEE 1619)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+
+config CRYPTO_AES_ARM64_NEON_BLK
+	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_AES
+	help
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	  with block cipher modes:
+	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	  - CTR (Counter) mode (NIST SP800-38A)
+	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	    and IEEE 1619)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_CHACHA20_NEON
+	tristate "Ciphers: ChaCha (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_CHACHA_GENERIC
+	select CRYPTO_ARCH_HAVE_LIB_CHACHA
+	help
+	  Length-preserving ciphers: ChaCha20, XChaCha20, and XChaCha12
+	  stream cipher algorithms
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_AES_ARM64_BS
+	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XCTR/XTS modes (bit-sliced NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_SKCIPHER
+	select CRYPTO_AES_ARM64_NEON_BLK
+	select CRYPTO_LIB_AES
+	help
+	  Length-preserving ciphers: AES cipher algorithms (FIPS-197)
+	  with block cipher modes:
+	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	  - CTR (Counter) mode (NIST SP800-38A)
+	  - XCTR mode for HCTR2
+	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	    and IEEE 1619)
+
+	  Architecture: arm64 using:
+	  - bit-sliced algorithm
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SM4_ARM64_CE
+	tristate "Ciphers: SM4 (ARMv8.2 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_ALGAPI
+	select CRYPTO_SM4
+	help
+	  Block ciphers: SM4 cipher algorithms (OSCCA GB/T 32907-2016)
+
+	  Architecture: arm64 using:
+	  - ARMv8.2 Crypto Extensions
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SM4_ARM64_CE_BLK
+	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR/XTS (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_SKCIPHER
+	select CRYPTO_SM4
+	help
+	  Length-preserving ciphers: SM4 cipher algorithms (OSCCA GB/T 32907-2016)
+	  with block cipher modes:
+	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
+	  - CTR (Counter) mode (NIST SP800-38A)
+	  - XTS (XOR Encrypt XOR with ciphertext stealing) mode (NIST SP800-38E
+	    and IEEE 1619)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SM4_ARM64_NEON_BLK
+	tristate "Ciphers: SM4, modes: ECB/CBC/CFB/CTR (NEON)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_SKCIPHER
+	select CRYPTO_SM4
+	help
+	  Length-preserving ciphers: SM4 cipher algorithms (OSCCA GB/T 32907-2016)
+	  with block cipher modes:
+	  - ECB (Electronic Codebook) mode (NIST SP800-38A)
+	  - CBC (Cipher Block Chaining) mode (NIST SP800-38A)
+	  - CFB (Cipher Feedback) mode (NIST SP800-38A)
+	  - CTR (Counter) mode (NIST SP800-38A)
+
+	  Architecture: arm64 using:
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_AES_ARM64_CE_CCM
+	tristate "AEAD cipher: AES in CCM mode (ARMv8 Crypto Extensions)"
+	depends on ARM64 && KERNEL_MODE_NEON
+	select CRYPTO_ALGAPI
+	select CRYPTO_AES_ARM64_CE
+	select CRYPTO_AEAD
+	select CRYPTO_LIB_AES
+	help
+	  AEAD cipher: AES cipher algorithms (FIPS-197) with
+	  CCM (Counter with Cipher Block Chaining-Message Authentication Code)
+	  authenticated encryption mode (NIST SP800-38C)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SM4_ARM64_CE_CCM
+	tristate "AEAD cipher: SM4 in CCM mode (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_ALGAPI
+	select CRYPTO_AEAD
+	select CRYPTO_SM4
+	select CRYPTO_SM4_ARM64_CE_BLK
+	help
+	  AEAD cipher: SM4 cipher algorithms (OSCCA GB/T 32907-2016) with
+	  CCM (Counter with Cipher Block Chaining-Message Authentication Code)
+	  authenticated encryption mode (NIST SP800-38C)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_SM4_ARM64_CE_GCM
+	tristate "AEAD cipher: SM4 in GCM mode (ARMv8 Crypto Extensions)"
+	depends on KERNEL_MODE_NEON
+	select CRYPTO_ALGAPI
+	select CRYPTO_AEAD
+	select CRYPTO_SM4
+	select CRYPTO_SM4_ARM64_CE_BLK
+	help
+	  AEAD cipher: SM4 cipher algorithms (OSCCA GB/T 32907-2016) with
+	  GCM (Galois/Counter Mode) authenticated encryption mode (NIST SP800-38D)
+
+	  Architecture: arm64 using:
+	  - ARMv8 Crypto Extensions
+	  - PMULL (Polynomial Multiply Long) instructions
+	  - NEON (Advanced SIMD) extensions
+
+config CRYPTO_CRCT10DIF_ARM64_CE
+	tristate "CRCT10DIF (PMULL)"
+	depends on KERNEL_MODE_NEON && CRC_T10DIF
+	select CRYPTO_HASH
+	help
+	  CRC16 CRC algorithm used for the T10 (SCSI) Data Integrity Field (DIF)
+
+	  Architecture: arm64 using
+	  - PMULL (Polynomial Multiply Long) instructions
+
+endmenu
+
diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile
new file mode 100644
index 000000000..fbe64dce6
--- /dev/null
+++ b/arch/arm64/crypto/Makefile
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# linux/arch/arm64/crypto/Makefile
+#
+# Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org>
+#
+
+obj-$(CONFIG_CRYPTO_SHA1_ARM64_CE) += sha1-ce.o
+sha1-ce-y := sha1-ce-glue.o sha1-ce-core.o
+
+obj-$(CONFIG_CRYPTO_SHA2_ARM64_CE) += sha2-ce.o
+sha2-ce-y := sha2-ce-glue.o sha2-ce-core.o
+
+obj-$(CONFIG_CRYPTO_SHA512_ARM64_CE) += sha512-ce.o
+sha512-ce-y := sha512-ce-glue.o sha512-ce-core.o
+
+obj-$(CONFIG_CRYPTO_SHA3_ARM64) += sha3-ce.o
+sha3-ce-y := sha3-ce-glue.o sha3-ce-core.o
+
+obj-$(CONFIG_CRYPTO_SM3_NEON) += sm3-neon.o
+sm3-neon-y := sm3-neon-glue.o sm3-neon-core.o
+
+obj-$(CONFIG_CRYPTO_SM3_ARM64_CE) += sm3-ce.o
+sm3-ce-y := sm3-ce-glue.o sm3-ce-core.o
+
+obj-$(CONFIG_CRYPTO_SM4_ARM64_CE) += sm4-ce-cipher.o
+sm4-ce-cipher-y := sm4-ce-cipher-glue.o sm4-ce-cipher-core.o
+
+obj-$(CONFIG_CRYPTO_SM4_ARM64_CE_BLK) += sm4-ce.o
+sm4-ce-y := sm4-ce-glue.o sm4-ce-core.o
+
+obj-$(CONFIG_CRYPTO_SM4_ARM64_CE_CCM) += sm4-ce-ccm.o
+sm4-ce-ccm-y := sm4-ce-ccm-glue.o sm4-ce-ccm-core.o
+
+obj-$(CONFIG_CRYPTO_SM4_ARM64_CE_GCM) += sm4-ce-gcm.o
+sm4-ce-gcm-y := sm4-ce-gcm-glue.o sm4-ce-gcm-core.o
+
+obj-$(CONFIG_CRYPTO_SM4_ARM64_NEON_BLK) += sm4-neon.o
+sm4-neon-y := sm4-neon-glue.o sm4-neon-core.o
+
+obj-$(CONFIG_CRYPTO_GHASH_ARM64_CE) += ghash-ce.o
+ghash-ce-y := ghash-ce-glue.o ghash-ce-core.o
+
+obj-$(CONFIG_CRYPTO_POLYVAL_ARM64_CE) += polyval-ce.o
+polyval-ce-y := polyval-ce-glue.o polyval-ce-core.o
+
+obj-$(CONFIG_CRYPTO_CRCT10DIF_ARM64_CE) += crct10dif-ce.o
+crct10dif-ce-y := crct10dif-ce-core.o crct10dif-ce-glue.o
+
+obj-$(CONFIG_CRYPTO_AES_ARM64_CE) += aes-ce-cipher.o
+aes-ce-cipher-y := aes-ce-core.o aes-ce-glue.o
+
+obj-$(CONFIG_CRYPTO_AES_ARM64_CE_CCM) += aes-ce-ccm.o
+aes-ce-ccm-y := aes-ce-ccm-glue.o aes-ce-ccm-core.o
+
+obj-$(CONFIG_CRYPTO_AES_ARM64_CE_BLK) += aes-ce-blk.o
+aes-ce-blk-y := aes-glue-ce.o aes-ce.o
+
+obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o
+aes-neon-blk-y := aes-glue-neon.o aes-neon.o
+
+obj-$(CONFIG_CRYPTO_SHA256_ARM64) += sha256-arm64.o
+sha256-arm64-y := sha256-glue.o sha256-core.o
+
+obj-$(CONFIG_CRYPTO_SHA512_ARM64) += sha512-arm64.o
+sha512-arm64-y := sha512-glue.o sha512-core.o
+
+obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
+chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
+
+obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o
+poly1305-neon-y := poly1305-core.o poly1305-glue.o
+AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_init_arm64
+
+obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
+nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
+
+obj-$(CONFIG_CRYPTO_AES_ARM64) += aes-arm64.o
+aes-arm64-y := aes-cipher-core.o aes-cipher-glue.o
+
+obj-$(CONFIG_CRYPTO_AES_ARM64_BS) += aes-neon-bs.o
+aes-neon-bs-y := aes-neonbs-core.o aes-neonbs-glue.o
+
+quiet_cmd_perlasm = PERLASM $@
+      cmd_perlasm = $(PERL) $(<) void $(@)
+
+$(obj)/%-core.S: $(src)/%-armv8.pl
+	$(call cmd,perlasm)
+
+$(obj)/sha256-core.S: $(src)/sha512-armv8.pl
+	$(call cmd,perlasm)
+
+clean-files += poly1305-core.S sha256-core.S sha512-core.S
diff --git a/arch/arm64/crypto/aes-ce-ccm-core.S b/arch/arm64/crypto/aes-ce-ccm-core.S
new file mode 100644
index 000000000..b03f7f71f
--- /dev/null
+++ b/arch/arm64/crypto/aes-ce-ccm-core.S
@@ -0,0 +1,221 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * aesce-ccm-core.S - AES-CCM transform for ARMv8 with Crypto Extensions
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+	.arch	armv8-a+crypto
+
+	/*
+	 * u32 ce_aes_ccm_auth_data(u8 mac[], u8 const in[], u32 abytes,
+	 *			    u32 macp, u8 const rk[], u32 rounds);
+	 */
+SYM_FUNC_START(ce_aes_ccm_auth_data)
+	ld1	{v0.16b}, [x0]			/* load mac */
+	cbz	w3, 1f
+	sub	w3, w3, #16
+	eor	v1.16b, v1.16b, v1.16b
+0:	ldrb	w7, [x1], #1			/* get 1 byte of input */
+	subs	w2, w2, #1
+	add	w3, w3, #1
+	ins	v1.b[0], w7
+	ext	v1.16b, v1.16b, v1.16b, #1	/* rotate in the input bytes */
+	beq	8f				/* out of input? */
+	cbnz	w3, 0b
+	eor	v0.16b, v0.16b, v1.16b
+1:	ld1	{v3.4s}, [x4]			/* load first round key */
+	prfm	pldl1strm, [x1]
+	cmp	w5, #12				/* which key size? */
+	add	x6, x4, #16
+	sub	w7, w5, #2			/* modified # of rounds */
+	bmi	2f
+	bne	5f
+	mov	v5.16b, v3.16b
+	b	4f
+2:	mov	v4.16b, v3.16b
+	ld1	{v5.4s}, [x6], #16		/* load 2nd round key */
+3:	aese	v0.16b, v4.16b
+	aesmc	v0.16b, v0.16b
+4:	ld1	{v3.4s}, [x6], #16		/* load next round key */
+	aese	v0.16b, v5.16b
+	aesmc	v0.16b, v0.16b
+5:	ld1	{v4.4s}, [x6], #16		/* load next round key */
+	subs	w7, w7, #3
+	aese	v0.16b, v3.16b
+	aesmc	v0.16b, v0.16b
+	ld1	{v5.4s}, [x6], #16		/* load next round key */
+	bpl	3b
+	aese	v0.16b, v4.16b
+	subs	w2, w2, #16			/* last data? */
+	eor	v0.16b, v0.16b, v5.16b		/* final round */
+	bmi	6f
+	ld1	{v1.16b}, [x1], #16		/* load next input block */
+	eor	v0.16b, v0.16b, v1.16b		/* xor with mac */
+	bne	1b
+6:	st1	{v0.16b}, [x0]			/* store mac */
+	beq	10f
+	adds	w2, w2, #16
+	beq	10f
+	mov	w3, w2
+7:	ldrb	w7, [x1], #1
+	umov	w6, v0.b[0]
+	eor	w6, w6, w7
+	strb	w6, [x0], #1
+	subs	w2, w2, #1
+	beq	10f
+	ext	v0.16b, v0.16b, v0.16b, #1	/* rotate out the mac bytes */
+	b	7b
+8:	cbz	w3, 91f
+	mov	w7, w3
+	add	w3, w3, #16
+9:	ext	v1.16b, v1.16b, v1.16b, #1
+	adds	w7, w7, #1
+	bne	9b
+91:	eor	v0.16b, v0.16b, v1.16b
+	st1	{v0.16b}, [x0]
+10:	mov	w0, w3
+	ret
+SYM_FUNC_END(ce_aes_ccm_auth_data)
+
+	/*
+	 * void ce_aes_ccm_final(u8 mac[], u8 const ctr[], u8 const rk[],
+	 * 			 u32 rounds);
+	 */
+SYM_FUNC_START(ce_aes_ccm_final)
+	ld1	{v3.4s}, [x2], #16		/* load first round key */
+	ld1	{v0.16b}, [x0]			/* load mac */
+	cmp	w3, #12				/* which key size? */
+	sub	w3, w3, #2			/* modified # of rounds */
+	ld1	{v1.16b}, [x1]			/* load 1st ctriv */
+	bmi	0f
+	bne	3f
+	mov	v5.16b, v3.16b
+	b	2f
+0:	mov	v4.16b, v3.16b
+1:	ld1	{v5.4s}, [x2], #16		/* load next round key */
+	aese	v0.16b, v4.16b
+	aesmc	v0.16b, v0.16b
+	aese	v1.16b, v4.16b
+	aesmc	v1.16b, v1.16b
+2:	ld1	{v3.4s}, [x2], #16		/* load next round key */
+	aese	v0.16b, v5.16b
+	aesmc	v0.16b, v0.16b
+	aese	v1.16b, v5.16b
+	aesmc	v1.16b, v1.16b
+3:	ld1	{v4.4s}, [x2], #16		/* load next round key */
+	subs	w3, w3, #3
+	aese	v0.16b, v3.16b
+	aesmc	v0.16b, v0.16b
+	aese	v1.16b, v3.16b
+	aesmc	v1.16b, v1.16b
+	bpl	1b
+	aese	v0.16b, v4.16b
+	aese	v1.16b, v4.16b
+	/* final round key cancels out */
+	eor	v0.16b, v0.16b, v1.16b		/* en-/decrypt the mac */
+	st1	{v0.16b}, [x0]			/* store result */
+	ret
+SYM_FUNC_END(ce_aes_ccm_final)
+
+	.macro	aes_ccm_do_crypt,enc
+	cbz	x2, 5f
+	ldr	x8, [x6, #8]			/* load lower ctr */
+	ld1	{v0.16b}, [x5]			/* load mac */
+CPU_LE(	rev	x8, x8			)	/* keep swabbed ctr in reg */
+0:	/* outer loop */
+	ld1	{v1.8b}, [x6]			/* load upper ctr */
+	prfm	pldl1strm, [x1]
+	add	x8, x8, #1
+	rev	x9, x8
+	cmp	w4, #12				/* which key size? */
+	sub	w7, w4, #2			/* get modified # of rounds */
+	ins	v1.d[1], x9			/* no carry in lower ctr */
+	ld1	{v3.4s}, [x3]			/* load first round key */
+	add	x10, x3, #16
+	bmi	1f
+	bne	4f
+	mov	v5.16b, v3.16b
+	b	3f
+1:	mov	v4.16b, v3.16b
+	ld1	{v5.4s}, [x10], #16		/* load 2nd round key */
+2:	/* inner loop: 3 rounds, 2x interleaved */
+	aese	v0.16b, v4.16b
+	aesmc	v0.16b, v0.16b
+	aese	v1.16b, v4.16b
+	aesmc	v1.16b, v1.16b
+3:	ld1	{v3.4s}, [x10], #16		/* load next round key */
+	aese	v0.16b, v5.16b
+	aesmc	v0.16b, v0.16b
+	aese	v1.16b, v5.16b
+	aesmc	v1.16b, v1.16b
+4:	ld1	{v4.4s}, [x10], #16		/* load next round key */
+	subs	w7, w7, #3
+	aese	v0.16b, v3.16b
+	aesmc	v0.16b, v0.16b
+	aese	v1.16b, v3.16b
+	aesmc	v1.16b, v1.16b
+	ld1	{v5.4s}, [x10], #16		/* load next round key */
+	bpl	2b
+	aese	v0.16b, v4.16b
+	aese	v1.16b, v4.16b
+	subs	w2, w2, #16
+	bmi	6f				/* partial block? */
+	ld1	{v2.16b}, [x1], #16		/* load next input block */
+	.if	\enc == 1
+	eor	v2.16b, v2.16b, v5.16b		/* final round enc+mac */
+	eor	v1.16b, v1.16b, v2.16b		/* xor with crypted ctr */
+	.else
+	eor	v2.16b, v2.16b, v1.16b		/* xor with crypted ctr */
+	eor	v1.16b, v2.16b, v5.16b		/* final round enc */
+	.endif
+	eor	v0.16b, v0.16b, v2.16b		/* xor mac with pt ^ rk[last] */
+	st1	{v1.16b}, [x0], #16		/* write output block */
+	bne	0b
+CPU_LE(	rev	x8, x8			)
+	st1	{v0.16b}, [x5]			/* store mac */
+	str	x8, [x6, #8]			/* store lsb end of ctr (BE) */
+5:	ret
+
+6:	eor	v0.16b, v0.16b, v5.16b		/* final round mac */
+	eor	v1.16b, v1.16b, v5.16b		/* final round enc */
+	st1	{v0.16b}, [x5]			/* store mac */
+	add	w2, w2, #16			/* process partial tail block */
+7:	ldrb	w9, [x1], #1			/* get 1 byte of input */
+	umov	w6, v1.b[0]			/* get top crypted ctr byte */
+	umov	w7, v0.b[0]			/* get top mac byte */
+	.if	\enc == 1
+	eor	w7, w7, w9
+	eor	w9, w9, w6
+	.else
+	eor	w9, w9, w6
+	eor	w7, w7, w9
+	.endif
+	strb	w9, [x0], #1			/* store out byte */
+	strb	w7, [x5], #1			/* store mac byte */
+	subs	w2, w2, #1
+	beq	5b
+	ext	v0.16b, v0.16b, v0.16b, #1	/* shift out mac byte */
+	ext	v1.16b, v1.16b, v1.16b, #1	/* shift out ctr byte */
+	b	7b
+	.endm
+
+	/*
+	 * void ce_aes_ccm_encrypt(u8 out[], u8 const in[], u32 cbytes,
+	 * 			   u8 const rk[], u32 rounds, u8 mac[],
+	 * 			   u8 ctr[]);
+	 * void ce_aes_ccm_decrypt(u8 out[], u8 const in[], u32 cbytes,
+	 * 			   u8 const rk[], u32 rounds, u8 mac[],
+	 * 			   u8 ctr[]);
+	 */
+SYM_FUNC_START(ce_aes_ccm_encrypt)
+	aes_ccm_do_crypt	1
+SYM_FUNC_END(ce_aes_ccm_encrypt)
+
+SYM_FUNC_START(ce_aes_ccm_decrypt)
+	aes_ccm_do_crypt	0
+SYM_FUNC_END(ce_aes_ccm_decrypt)
diff --git a/arch/arm64/crypto/aes-ce-ccm-glue.c b/arch/arm64/crypto/aes-ce-ccm-glue.c
new file mode 100644
index 000000000..25cd3808e
--- /dev/null
+++ b/arch/arm64/crypto/aes-ce-ccm-glue.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * aes-ccm-glue.c - AES-CCM transform for ARMv8 with Crypto Extensions
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/unaligned.h>
+#include <crypto/aes.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/skcipher.h>
+#include <linux/module.h>
+
+#include "aes-ce-setkey.h"
+
+static int num_rounds(struct crypto_aes_ctx *ctx)
+{
+	/*
+	 * # of rounds specified by AES:
+	 * 128 bit key		10 rounds
+	 * 192 bit key		12 rounds
+	 * 256 bit key		14 rounds
+	 * => n byte key	=> 6 + (n/4) rounds
+	 */
+	return 6 + ctx->key_length / 4;
+}
+
+asmlinkage u32 ce_aes_ccm_auth_data(u8 mac[], u8 const in[], u32 abytes,
+				    u32 macp, u32 const rk[], u32 rounds);
+
+asmlinkage void ce_aes_ccm_encrypt(u8 out[], u8 const in[], u32 cbytes,
+				   u32 const rk[], u32 rounds, u8 mac[],
+				   u8 ctr[]);
+
+asmlinkage void ce_aes_ccm_decrypt(u8 out[], u8 const in[], u32 cbytes,
+				   u32 const rk[], u32 rounds, u8 mac[],
+				   u8 ctr[]);
+
+asmlinkage void ce_aes_ccm_final(u8 mac[], u8 const ctr[], u32 const rk[],
+				 u32 rounds);
+
+static int ccm_setkey(struct crypto_aead *tfm, const u8 *in_key,
+		      unsigned int key_len)
+{
+	struct crypto_aes_ctx *ctx = crypto_aead_ctx(tfm);
+
+	return ce_aes_expandkey(ctx, in_key, key_len);
+}
+
+static int ccm_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	if ((authsize & 1) || authsize < 4)
+		return -EINVAL;
+	return 0;
+}
+
+static int ccm_init_mac(struct aead_request *req, u8 maciv[], u32 msglen)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	__be32 *n = (__be32 *)&maciv[AES_BLOCK_SIZE - 8];
+	u32 l = req->iv[0] + 1;
+
+	/* verify that CCM dimension 'L' is set correctly in the IV */
+	if (l < 2 || l > 8)
+		return -EINVAL;
+
+	/* verify that msglen can in fact be represented in L bytes */
+	if (l < 4 && msglen >> (8 * l))
+		return -EOVERFLOW;
+
+	/*
+	 * Even if the CCM spec allows L values of up to 8, the Linux cryptoapi
+	 * uses a u32 type to represent msglen so the top 4 bytes are always 0.
+	 */
+	n[0] = 0;
+	n[1] = cpu_to_be32(msglen);
+
+	memcpy(maciv, req->iv, AES_BLOCK_SIZE - l);
+
+	/*
+	 * Meaning of byte 0 according to CCM spec (RFC 3610/NIST 800-38C)
+	 * - bits 0..2	: max # of bytes required to represent msglen, minus 1
+	 *                (already set by caller)
+	 * - bits 3..5	: size of auth tag (1 => 4 bytes, 2 => 6 bytes, etc)
+	 * - bit 6	: indicates presence of authenticate-only data
+	 */
+	maciv[0] |= (crypto_aead_authsize(aead) - 2) << 2;
+	if (req->assoclen)
+		maciv[0] |= 0x40;
+
+	memset(&req->iv[AES_BLOCK_SIZE - l], 0, l);
+	return 0;
+}
+
+static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[])
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead);
+	struct __packed { __be16 l; __be32 h; u16 len; } ltag;
+	struct scatter_walk walk;
+	u32 len = req->assoclen;
+	u32 macp = 0;
+
+	/* prepend the AAD with a length tag */
+	if (len < 0xff00) {
+		ltag.l = cpu_to_be16(len);
+		ltag.len = 2;
+	} else  {
+		ltag.l = cpu_to_be16(0xfffe);
+		put_unaligned_be32(len, &ltag.h);
+		ltag.len = 6;
+	}
+
+	macp = ce_aes_ccm_auth_data(mac, (u8 *)&ltag, ltag.len, macp,
+				    ctx->key_enc, num_rounds(ctx));
+	scatterwalk_start(&walk, req->src);
+
+	do {
+		u32 n = scatterwalk_clamp(&walk, len);
+		u8 *p;
+
+		if (!n) {
+			scatterwalk_start(&walk, sg_next(walk.sg));
+			n = scatterwalk_clamp(&walk, len);
+		}
+		n = min_t(u32, n, SZ_4K); /* yield NEON at least every 4k */
+		p = scatterwalk_map(&walk);
+
+		macp = ce_aes_ccm_auth_data(mac, p, n, macp, ctx->key_enc,
+					    num_rounds(ctx));
+
+		if (len / SZ_4K > (len - n) / SZ_4K) {
+			kernel_neon_end();
+			kernel_neon_begin();
+		}
+		len -= n;
+
+		scatterwalk_unmap(p);
+		scatterwalk_advance(&walk, n);
+		scatterwalk_done(&walk, 0, len);
+	} while (len);
+}
+
+static int ccm_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead);
+	struct skcipher_walk walk;
+	u8 __aligned(8) mac[AES_BLOCK_SIZE];
+	u8 buf[AES_BLOCK_SIZE];
+	u32 len = req->cryptlen;
+	int err;
+
+	err = ccm_init_mac(req, mac, len);
+	if (err)
+		return err;
+
+	/* preserve the original iv for the final round */
+	memcpy(buf, req->iv, AES_BLOCK_SIZE);
+
+	err = skcipher_walk_aead_encrypt(&walk, req, false);
+
+	kernel_neon_begin();
+
+	if (req->assoclen)
+		ccm_calculate_auth_mac(req, mac);
+
+	while (walk.nbytes) {
+		u32 tail = walk.nbytes % AES_BLOCK_SIZE;
+		bool final = walk.nbytes == walk.total;
+
+		if (final)
+			tail = 0;
+
+		ce_aes_ccm_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				   walk.nbytes - tail, ctx->key_enc,
+				   num_rounds(ctx), mac, walk.iv);
+
+		if (!final)
+			kernel_neon_end();
+		err = skcipher_walk_done(&walk, tail);
+		if (!final)
+			kernel_neon_begin();
+	}
+
+	ce_aes_ccm_final(mac, buf, ctx->key_enc, num_rounds(ctx));
+
+	kernel_neon_end();
+
+	/* copy authtag to end of dst */
+	scatterwalk_map_and_copy(mac, req->dst, req->assoclen + req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return err;
+}
+
+static int ccm_decrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_aead_ctx(aead);
+	unsigned int authsize = crypto_aead_authsize(aead);
+	struct skcipher_walk walk;
+	u8 __aligned(8) mac[AES_BLOCK_SIZE];
+	u8 buf[AES_BLOCK_SIZE];
+	u32 len = req->cryptlen - authsize;
+	int err;
+
+	err = ccm_init_mac(req, mac, len);
+	if (err)
+		return err;
+
+	/* preserve the original iv for the final round */
+	memcpy(buf, req->iv, AES_BLOCK_SIZE);
+
+	err = skcipher_walk_aead_decrypt(&walk, req, false);
+
+	kernel_neon_begin();
+
+	if (req->assoclen)
+		ccm_calculate_auth_mac(req, mac);
+
+	while (walk.nbytes) {
+		u32 tail = walk.nbytes % AES_BLOCK_SIZE;
+		bool final = walk.nbytes == walk.total;
+
+		if (final)
+			tail = 0;
+
+		ce_aes_ccm_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				   walk.nbytes - tail, ctx->key_enc,
+				   num_rounds(ctx), mac, walk.iv);
+
+		if (!final)
+			kernel_neon_end();
+		err = skcipher_walk_done(&walk, tail);
+		if (!final)
+			kernel_neon_begin();
+	}
+
+	ce_aes_ccm_final(mac, buf, ctx->key_enc, num_rounds(ctx));
+
+	kernel_neon_end();
+
+	if (unlikely(err))
+		return err;
+
+	/* compare calculated auth tag with the stored one */
+	scatterwalk_map_and_copy(buf, req->src,
+				 req->assoclen + req->cryptlen - authsize,
+				 authsize, 0);
+
+	if (crypto_memneq(mac, buf, authsize))
+		return -EBADMSG;
+	return 0;
+}
+
+static struct aead_alg ccm_aes_alg = {
+	.base = {
+		.cra_name		= "ccm(aes)",
+		.cra_driver_name	= "ccm-aes-ce",
+		.cra_priority		= 300,
+		.cra_blocksize		= 1,
+		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.ivsize		= AES_BLOCK_SIZE,
+	.chunksize	= AES_BLOCK_SIZE,
+	.maxauthsize	= AES_BLOCK_SIZE,
+	.setkey		= ccm_setkey,
+	.setauthsize	= ccm_setauthsize,
+	.encrypt	= ccm_encrypt,
+	.decrypt	= ccm_decrypt,
+};
+
+static int __init aes_mod_init(void)
+{
+	if (!cpu_have_named_feature(AES))
+		return -ENODEV;
+	return crypto_register_aead(&ccm_aes_alg);
+}
+
+static void __exit aes_mod_exit(void)
+{
+	crypto_unregister_aead(&ccm_aes_alg);
+}
+
+module_init(aes_mod_init);
+module_exit(aes_mod_exit);
+
+MODULE_DESCRIPTION("Synchronous AES in CCM mode using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("ccm(aes)");
diff --git a/arch/arm64/crypto/aes-ce-core.S b/arch/arm64/crypto/aes-ce-core.S
new file mode 100644
index 000000000..e52e13eb8
--- /dev/null
+++ b/arch/arm64/crypto/aes-ce-core.S
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.arch		armv8-a+crypto
+
+SYM_FUNC_START(__aes_ce_encrypt)
+	sub		w3, w3, #2
+	ld1		{v0.16b}, [x2]
+	ld1		{v1.4s}, [x0], #16
+	cmp		w3, #10
+	bmi		0f
+	bne		3f
+	mov		v3.16b, v1.16b
+	b		2f
+0:	mov		v2.16b, v1.16b
+	ld1		{v3.4s}, [x0], #16
+1:	aese		v0.16b, v2.16b
+	aesmc		v0.16b, v0.16b
+2:	ld1		{v1.4s}, [x0], #16
+	aese		v0.16b, v3.16b
+	aesmc		v0.16b, v0.16b
+3:	ld1		{v2.4s}, [x0], #16
+	subs		w3, w3, #3
+	aese		v0.16b, v1.16b
+	aesmc		v0.16b, v0.16b
+	ld1		{v3.4s}, [x0], #16
+	bpl		1b
+	aese		v0.16b, v2.16b
+	eor		v0.16b, v0.16b, v3.16b
+	st1		{v0.16b}, [x1]
+	ret
+SYM_FUNC_END(__aes_ce_encrypt)
+
+SYM_FUNC_START(__aes_ce_decrypt)
+	sub		w3, w3, #2
+	ld1		{v0.16b}, [x2]
+	ld1		{v1.4s}, [x0], #16
+	cmp		w3, #10
+	bmi		0f
+	bne		3f
+	mov		v3.16b, v1.16b
+	b		2f
+0:	mov		v2.16b, v1.16b
+	ld1		{v3.4s}, [x0], #16
+1:	aesd		v0.16b, v2.16b
+	aesimc		v0.16b, v0.16b
+2:	ld1		{v1.4s}, [x0], #16
+	aesd		v0.16b, v3.16b
+	aesimc		v0.16b, v0.16b
+3:	ld1		{v2.4s}, [x0], #16
+	subs		w3, w3, #3
+	aesd		v0.16b, v1.16b
+	aesimc		v0.16b, v0.16b
+	ld1		{v3.4s}, [x0], #16
+	bpl		1b
+	aesd		v0.16b, v2.16b
+	eor		v0.16b, v0.16b, v3.16b
+	st1		{v0.16b}, [x1]
+	ret
+SYM_FUNC_END(__aes_ce_decrypt)
+
+/*
+ * __aes_ce_sub() - use the aese instruction to perform the AES sbox
+ *                  substitution on each byte in 'input'
+ */
+SYM_FUNC_START(__aes_ce_sub)
+	dup		v1.4s, w0
+	movi		v0.16b, #0
+	aese		v0.16b, v1.16b
+	umov		w0, v0.s[0]
+	ret
+SYM_FUNC_END(__aes_ce_sub)
+
+SYM_FUNC_START(__aes_ce_invert)
+	ld1		{v0.4s}, [x1]
+	aesimc		v1.16b, v0.16b
+	st1		{v1.4s}, [x0]
+	ret
+SYM_FUNC_END(__aes_ce_invert)
diff --git a/arch/arm64/crypto/aes-ce-glue.c b/arch/arm64/crypto/aes-ce-glue.c
new file mode 100644
index 000000000..e921823ca
--- /dev/null
+++ b/arch/arm64/crypto/aes-ce-glue.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * aes-ce-cipher.c - core AES cipher using ARMv8 Crypto Extensions
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <crypto/internal/simd.h>
+#include <linux/cpufeature.h>
+#include <linux/module.h>
+
+#include "aes-ce-setkey.h"
+
+MODULE_DESCRIPTION("Synchronous AES cipher using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+
+struct aes_block {
+	u8 b[AES_BLOCK_SIZE];
+};
+
+asmlinkage void __aes_ce_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+asmlinkage void __aes_ce_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+
+asmlinkage u32 __aes_ce_sub(u32 l);
+asmlinkage void __aes_ce_invert(struct aes_block *out,
+				const struct aes_block *in);
+
+static int num_rounds(struct crypto_aes_ctx *ctx)
+{
+	/*
+	 * # of rounds specified by AES:
+	 * 128 bit key		10 rounds
+	 * 192 bit key		12 rounds
+	 * 256 bit key		14 rounds
+	 * => n byte key	=> 6 + (n/4) rounds
+	 */
+	return 6 + ctx->key_length / 4;
+}
+
+static void aes_cipher_encrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
+{
+	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (!crypto_simd_usable()) {
+		aes_encrypt(ctx, dst, src);
+		return;
+	}
+
+	kernel_neon_begin();
+	__aes_ce_encrypt(ctx->key_enc, dst, src, num_rounds(ctx));
+	kernel_neon_end();
+}
+
+static void aes_cipher_decrypt(struct crypto_tfm *tfm, u8 dst[], u8 const src[])
+{
+	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (!crypto_simd_usable()) {
+		aes_decrypt(ctx, dst, src);
+		return;
+	}
+
+	kernel_neon_begin();
+	__aes_ce_decrypt(ctx->key_dec, dst, src, num_rounds(ctx));
+	kernel_neon_end();
+}
+
+int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
+		     unsigned int key_len)
+{
+	/*
+	 * The AES key schedule round constants
+	 */
+	static u8 const rcon[] = {
+		0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36,
+	};
+
+	u32 kwords = key_len / sizeof(u32);
+	struct aes_block *key_enc, *key_dec;
+	int i, j;
+
+	if (key_len != AES_KEYSIZE_128 &&
+	    key_len != AES_KEYSIZE_192 &&
+	    key_len != AES_KEYSIZE_256)
+		return -EINVAL;
+
+	ctx->key_length = key_len;
+	for (i = 0; i < kwords; i++)
+		ctx->key_enc[i] = get_unaligned_le32(in_key + i * sizeof(u32));
+
+	kernel_neon_begin();
+	for (i = 0; i < sizeof(rcon); i++) {
+		u32 *rki = ctx->key_enc + (i * kwords);
+		u32 *rko = rki + kwords;
+
+		rko[0] = ror32(__aes_ce_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
+		rko[1] = rko[0] ^ rki[1];
+		rko[2] = rko[1] ^ rki[2];
+		rko[3] = rko[2] ^ rki[3];
+
+		if (key_len == AES_KEYSIZE_192) {
+			if (i >= 7)
+				break;
+			rko[4] = rko[3] ^ rki[4];
+			rko[5] = rko[4] ^ rki[5];
+		} else if (key_len == AES_KEYSIZE_256) {
+			if (i >= 6)
+				break;
+			rko[4] = __aes_ce_sub(rko[3]) ^ rki[4];
+			rko[5] = rko[4] ^ rki[5];
+			rko[6] = rko[5] ^ rki[6];
+			rko[7] = rko[6] ^ rki[7];
+		}
+	}
+
+	/*
+	 * Generate the decryption keys for the Equivalent Inverse Cipher.
+	 * This involves reversing the order of the round keys, and applying
+	 * the Inverse Mix Columns transformation on all but the first and
+	 * the last one.
+	 */
+	key_enc = (struct aes_block *)ctx->key_enc;
+	key_dec = (struct aes_block *)ctx->key_dec;
+	j = num_rounds(ctx);
+
+	key_dec[0] = key_enc[j];
+	for (i = 1, j--; j > 0; i++, j--)
+		__aes_ce_invert(key_dec + i, key_enc + j);
+	key_dec[i] = key_enc[0];
+
+	kernel_neon_end();
+	return 0;
+}
+EXPORT_SYMBOL(ce_aes_expandkey);
+
+int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
+		  unsigned int key_len)
+{
+	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	return ce_aes_expandkey(ctx, in_key, key_len);
+}
+EXPORT_SYMBOL(ce_aes_setkey);
+
+static struct crypto_alg aes_alg = {
+	.cra_name		= "aes",
+	.cra_driver_name	= "aes-ce",
+	.cra_priority		= 250,
+	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize		= AES_BLOCK_SIZE,
+	.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+	.cra_module		= THIS_MODULE,
+	.cra_cipher = {
+		.cia_min_keysize	= AES_MIN_KEY_SIZE,
+		.cia_max_keysize	= AES_MAX_KEY_SIZE,
+		.cia_setkey		= ce_aes_setkey,
+		.cia_encrypt		= aes_cipher_encrypt,
+		.cia_decrypt		= aes_cipher_decrypt
+	}
+};
+
+static int __init aes_mod_init(void)
+{
+	return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_mod_exit(void)
+{
+	crypto_unregister_alg(&aes_alg);
+}
+
+module_cpu_feature_match(AES, aes_mod_init);
+module_exit(aes_mod_exit);
diff --git a/arch/arm64/crypto/aes-ce-setkey.h b/arch/arm64/crypto/aes-ce-setkey.h
new file mode 100644
index 000000000..fd9ecf07d
--- /dev/null
+++ b/arch/arm64/crypto/aes-ce-setkey.h
@@ -0,0 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
+		  unsigned int key_len);
+int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
+		     unsigned int key_len);
diff --git a/arch/arm64/crypto/aes-ce.S b/arch/arm64/crypto/aes-ce.S
new file mode 100644
index 000000000..1dc5bbbfe
--- /dev/null
+++ b/arch/arm64/crypto/aes-ce.S
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/arch/arm64/crypto/aes-ce.S - AES cipher for ARMv8 with
+ *                                    Crypto Extensions
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define AES_FUNC_START(func)		SYM_FUNC_START(ce_ ## func)
+#define AES_FUNC_END(func)		SYM_FUNC_END(ce_ ## func)
+
+	.arch		armv8-a+crypto
+
+	xtsmask		.req	v16
+	cbciv		.req	v16
+	vctr		.req	v16
+
+	.macro		xts_reload_mask, tmp
+	.endm
+
+	.macro		xts_cts_skip_tw, reg, lbl
+	.endm
+
+	/* preload all round keys */
+	.macro		load_round_keys, rounds, rk
+	cmp		\rounds, #12
+	blo		2222f		/* 128 bits */
+	beq		1111f		/* 192 bits */
+	ld1		{v17.4s-v18.4s}, [\rk], #32
+1111:	ld1		{v19.4s-v20.4s}, [\rk], #32
+2222:	ld1		{v21.4s-v24.4s}, [\rk], #64
+	ld1		{v25.4s-v28.4s}, [\rk], #64
+	ld1		{v29.4s-v31.4s}, [\rk]
+	.endm
+
+	/* prepare for encryption with key in rk[] */
+	.macro		enc_prepare, rounds, rk, temp
+	mov		\temp, \rk
+	load_round_keys	\rounds, \temp
+	.endm
+
+	/* prepare for encryption (again) but with new key in rk[] */
+	.macro		enc_switch_key, rounds, rk, temp
+	mov		\temp, \rk
+	load_round_keys	\rounds, \temp
+	.endm
+
+	/* prepare for decryption with key in rk[] */
+	.macro		dec_prepare, rounds, rk, temp
+	mov		\temp, \rk
+	load_round_keys	\rounds, \temp
+	.endm
+
+	.macro		do_enc_Nx, de, mc, k, i0, i1, i2, i3, i4
+	aes\de		\i0\().16b, \k\().16b
+	aes\mc		\i0\().16b, \i0\().16b
+	.ifnb		\i1
+	aes\de		\i1\().16b, \k\().16b
+	aes\mc		\i1\().16b, \i1\().16b
+	.ifnb		\i3
+	aes\de		\i2\().16b, \k\().16b
+	aes\mc		\i2\().16b, \i2\().16b
+	aes\de		\i3\().16b, \k\().16b
+	aes\mc		\i3\().16b, \i3\().16b
+	.ifnb		\i4
+	aes\de		\i4\().16b, \k\().16b
+	aes\mc		\i4\().16b, \i4\().16b
+	.endif
+	.endif
+	.endif
+	.endm
+
+	/* up to 5 interleaved encryption rounds with the same round key */
+	.macro		round_Nx, enc, k, i0, i1, i2, i3, i4
+	.ifc		\enc, e
+	do_enc_Nx	e, mc, \k, \i0, \i1, \i2, \i3, \i4
+	.else
+	do_enc_Nx	d, imc, \k, \i0, \i1, \i2, \i3, \i4
+	.endif
+	.endm
+
+	/* up to 5 interleaved final rounds */
+	.macro		fin_round_Nx, de, k, k2, i0, i1, i2, i3, i4
+	aes\de		\i0\().16b, \k\().16b
+	.ifnb		\i1
+	aes\de		\i1\().16b, \k\().16b
+	.ifnb		\i3
+	aes\de		\i2\().16b, \k\().16b
+	aes\de		\i3\().16b, \k\().16b
+	.ifnb		\i4
+	aes\de		\i4\().16b, \k\().16b
+	.endif
+	.endif
+	.endif
+	eor		\i0\().16b, \i0\().16b, \k2\().16b
+	.ifnb		\i1
+	eor		\i1\().16b, \i1\().16b, \k2\().16b
+	.ifnb		\i3
+	eor		\i2\().16b, \i2\().16b, \k2\().16b
+	eor		\i3\().16b, \i3\().16b, \k2\().16b
+	.ifnb		\i4
+	eor		\i4\().16b, \i4\().16b, \k2\().16b
+	.endif
+	.endif
+	.endif
+	.endm
+
+	/* up to 5 interleaved blocks */
+	.macro		do_block_Nx, enc, rounds, i0, i1, i2, i3, i4
+	cmp		\rounds, #12
+	blo		2222f		/* 128 bits */
+	beq		1111f		/* 192 bits */
+	round_Nx	\enc, v17, \i0, \i1, \i2, \i3, \i4
+	round_Nx	\enc, v18, \i0, \i1, \i2, \i3, \i4
+1111:	round_Nx	\enc, v19, \i0, \i1, \i2, \i3, \i4
+	round_Nx	\enc, v20, \i0, \i1, \i2, \i3, \i4
+2222:	.irp		key, v21, v22, v23, v24, v25, v26, v27, v28, v29
+	round_Nx	\enc, \key, \i0, \i1, \i2, \i3, \i4
+	.endr
+	fin_round_Nx	\enc, v30, v31, \i0, \i1, \i2, \i3, \i4
+	.endm
+
+	.macro		encrypt_block, in, rounds, t0, t1, t2
+	do_block_Nx	e, \rounds, \in
+	.endm
+
+	.macro		encrypt_block4x, i0, i1, i2, i3, rounds, t0, t1, t2
+	do_block_Nx	e, \rounds, \i0, \i1, \i2, \i3
+	.endm
+
+	.macro		encrypt_block5x, i0, i1, i2, i3, i4, rounds, t0, t1, t2
+	do_block_Nx	e, \rounds, \i0, \i1, \i2, \i3, \i4
+	.endm
+
+	.macro		decrypt_block, in, rounds, t0, t1, t2
+	do_block_Nx	d, \rounds, \in
+	.endm
+
+	.macro		decrypt_block4x, i0, i1, i2, i3, rounds, t0, t1, t2
+	do_block_Nx	d, \rounds, \i0, \i1, \i2, \i3
+	.endm
+
+	.macro		decrypt_block5x, i0, i1, i2, i3, i4, rounds, t0, t1, t2
+	do_block_Nx	d, \rounds, \i0, \i1, \i2, \i3, \i4
+	.endm
+
+#define MAX_STRIDE	5
+
+#include "aes-modes.S"
diff --git a/arch/arm64/crypto/aes-cipher-core.S b/arch/arm64/crypto/aes-cipher-core.S
new file mode 100644
index 000000000..c9d6955f8
--- /dev/null
+++ b/arch/arm64/crypto/aes-cipher-core.S
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Scalar AES core transform
+ *
+ * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+	.text
+
+	rk		.req	x0
+	out		.req	x1
+	in		.req	x2
+	rounds		.req	x3
+	tt		.req	x2
+
+	.macro		__pair1, sz, op, reg0, reg1, in0, in1e, in1d, shift
+	.ifc		\op\shift, b0
+	ubfiz		\reg0, \in0, #2, #8
+	ubfiz		\reg1, \in1e, #2, #8
+	.else
+	ubfx		\reg0, \in0, #\shift, #8
+	ubfx		\reg1, \in1e, #\shift, #8
+	.endif
+
+	/*
+	 * AArch64 cannot do byte size indexed loads from a table containing
+	 * 32-bit quantities, i.e., 'ldrb w12, [tt, w12, uxtw #2]' is not a
+	 * valid instruction. So perform the shift explicitly first for the
+	 * high bytes (the low byte is shifted implicitly by using ubfiz rather
+	 * than ubfx above)
+	 */
+	.ifnc		\op, b
+	ldr		\reg0, [tt, \reg0, uxtw #2]
+	ldr		\reg1, [tt, \reg1, uxtw #2]
+	.else
+	.if		\shift > 0
+	lsl		\reg0, \reg0, #2
+	lsl		\reg1, \reg1, #2
+	.endif
+	ldrb		\reg0, [tt, \reg0, uxtw]
+	ldrb		\reg1, [tt, \reg1, uxtw]
+	.endif
+	.endm
+
+	.macro		__pair0, sz, op, reg0, reg1, in0, in1e, in1d, shift
+	ubfx		\reg0, \in0, #\shift, #8
+	ubfx		\reg1, \in1d, #\shift, #8
+	ldr\op		\reg0, [tt, \reg0, uxtw #\sz]
+	ldr\op		\reg1, [tt, \reg1, uxtw #\sz]
+	.endm
+
+	.macro		__hround, out0, out1, in0, in1, in2, in3, t0, t1, enc, sz, op
+	ldp		\out0, \out1, [rk], #8
+
+	__pair\enc	\sz, \op, w12, w13, \in0, \in1, \in3, 0
+	__pair\enc	\sz, \op, w14, w15, \in1, \in2, \in0, 8
+	__pair\enc	\sz, \op, w16, w17, \in2, \in3, \in1, 16
+	__pair\enc	\sz, \op, \t0, \t1, \in3, \in0, \in2, 24
+
+	eor		\out0, \out0, w12
+	eor		\out1, \out1, w13
+	eor		\out0, \out0, w14, ror #24
+	eor		\out1, \out1, w15, ror #24
+	eor		\out0, \out0, w16, ror #16
+	eor		\out1, \out1, w17, ror #16
+	eor		\out0, \out0, \t0, ror #8
+	eor		\out1, \out1, \t1, ror #8
+	.endm
+
+	.macro		fround, out0, out1, out2, out3, in0, in1, in2, in3, sz=2, op
+	__hround	\out0, \out1, \in0, \in1, \in2, \in3, \out2, \out3, 1, \sz, \op
+	__hround	\out2, \out3, \in2, \in3, \in0, \in1, \in1, \in2, 1, \sz, \op
+	.endm
+
+	.macro		iround, out0, out1, out2, out3, in0, in1, in2, in3, sz=2, op
+	__hround	\out0, \out1, \in0, \in3, \in2, \in1, \out2, \out3, 0, \sz, \op
+	__hround	\out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0, \sz, \op
+	.endm
+
+	.macro		do_crypt, round, ttab, ltab, bsz
+	ldp		w4, w5, [in]
+	ldp		w6, w7, [in, #8]
+	ldp		w8, w9, [rk], #16
+	ldp		w10, w11, [rk, #-8]
+
+CPU_BE(	rev		w4, w4		)
+CPU_BE(	rev		w5, w5		)
+CPU_BE(	rev		w6, w6		)
+CPU_BE(	rev		w7, w7		)
+
+	eor		w4, w4, w8
+	eor		w5, w5, w9
+	eor		w6, w6, w10
+	eor		w7, w7, w11
+
+	adr_l		tt, \ttab
+
+	tbnz		rounds, #1, 1f
+
+0:	\round		w8, w9, w10, w11, w4, w5, w6, w7
+	\round		w4, w5, w6, w7, w8, w9, w10, w11
+
+1:	subs		rounds, rounds, #4
+	\round		w8, w9, w10, w11, w4, w5, w6, w7
+	b.ls		3f
+2:	\round		w4, w5, w6, w7, w8, w9, w10, w11
+	b		0b
+3:	adr_l		tt, \ltab
+	\round		w4, w5, w6, w7, w8, w9, w10, w11, \bsz, b
+
+CPU_BE(	rev		w4, w4		)
+CPU_BE(	rev		w5, w5		)
+CPU_BE(	rev		w6, w6		)
+CPU_BE(	rev		w7, w7		)
+
+	stp		w4, w5, [out]
+	stp		w6, w7, [out, #8]
+	ret
+	.endm
+
+SYM_FUNC_START(__aes_arm64_encrypt)
+	do_crypt	fround, crypto_ft_tab, crypto_ft_tab + 1, 2
+SYM_FUNC_END(__aes_arm64_encrypt)
+
+	.align		5
+SYM_FUNC_START(__aes_arm64_decrypt)
+	do_crypt	iround, crypto_it_tab, crypto_aes_inv_sbox, 0
+SYM_FUNC_END(__aes_arm64_decrypt)
diff --git a/arch/arm64/crypto/aes-cipher-glue.c b/arch/arm64/crypto/aes-cipher-glue.c
new file mode 100644
index 000000000..4ec55e568
--- /dev/null
+++ b/arch/arm64/crypto/aes-cipher-glue.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Scalar AES core transform
+ *
+ * Copyright (C) 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <crypto/aes.h>
+#include <crypto/algapi.h>
+#include <linux/module.h>
+
+asmlinkage void __aes_arm64_encrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+asmlinkage void __aes_arm64_decrypt(u32 *rk, u8 *out, const u8 *in, int rounds);
+
+static void aes_arm64_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+	int rounds = 6 + ctx->key_length / 4;
+
+	__aes_arm64_encrypt(ctx->key_enc, out, in, rounds);
+}
+
+static void aes_arm64_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+	struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+	int rounds = 6 + ctx->key_length / 4;
+
+	__aes_arm64_decrypt(ctx->key_dec, out, in, rounds);
+}
+
+static struct crypto_alg aes_alg = {
+	.cra_name			= "aes",
+	.cra_driver_name		= "aes-arm64",
+	.cra_priority			= 200,
+	.cra_flags			= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize			= AES_BLOCK_SIZE,
+	.cra_ctxsize			= sizeof(struct crypto_aes_ctx),
+	.cra_module			= THIS_MODULE,
+
+	.cra_cipher.cia_min_keysize	= AES_MIN_KEY_SIZE,
+	.cra_cipher.cia_max_keysize	= AES_MAX_KEY_SIZE,
+	.cra_cipher.cia_setkey		= crypto_aes_set_key,
+	.cra_cipher.cia_encrypt		= aes_arm64_encrypt,
+	.cra_cipher.cia_decrypt		= aes_arm64_decrypt
+};
+
+static int __init aes_init(void)
+{
+	return crypto_register_alg(&aes_alg);
+}
+
+static void __exit aes_fini(void)
+{
+	crypto_unregister_alg(&aes_alg);
+}
+
+module_init(aes_init);
+module_exit(aes_fini);
+
+MODULE_DESCRIPTION("Scalar AES cipher for arm64");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("aes");
diff --git a/arch/arm64/crypto/aes-glue-ce.c b/arch/arm64/crypto/aes-glue-ce.c
new file mode 100644
index 000000000..7d309ceed
--- /dev/null
+++ b/arch/arm64/crypto/aes-glue-ce.c
@@ -0,0 +1,2 @@
+#define USE_V8_CRYPTO_EXTENSIONS
+#include "aes-glue.c"
diff --git a/arch/arm64/crypto/aes-glue-neon.c b/arch/arm64/crypto/aes-glue-neon.c
new file mode 100644
index 000000000..8ba046321
--- /dev/null
+++ b/arch/arm64/crypto/aes-glue-neon.c
@@ -0,0 +1 @@
+#include "aes-glue.c"
diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
new file mode 100644
index 000000000..162787c7a
--- /dev/null
+++ b/arch/arm64/crypto/aes-glue.c
@@ -0,0 +1,1059 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm64/crypto/aes-glue.c - wrapper code for ARMv8 AES
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/hwcap.h>
+#include <asm/simd.h>
+#include <crypto/aes.h>
+#include <crypto/ctr.h>
+#include <crypto/sha2.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
+#include <linux/module.h>
+#include <linux/cpufeature.h>
+#include <crypto/xts.h>
+
+#include "aes-ce-setkey.h"
+
+#ifdef USE_V8_CRYPTO_EXTENSIONS
+#define MODE			"ce"
+#define PRIO			300
+#define aes_expandkey		ce_aes_expandkey
+#define aes_ecb_encrypt		ce_aes_ecb_encrypt
+#define aes_ecb_decrypt		ce_aes_ecb_decrypt
+#define aes_cbc_encrypt		ce_aes_cbc_encrypt
+#define aes_cbc_decrypt		ce_aes_cbc_decrypt
+#define aes_cbc_cts_encrypt	ce_aes_cbc_cts_encrypt
+#define aes_cbc_cts_decrypt	ce_aes_cbc_cts_decrypt
+#define aes_essiv_cbc_encrypt	ce_aes_essiv_cbc_encrypt
+#define aes_essiv_cbc_decrypt	ce_aes_essiv_cbc_decrypt
+#define aes_ctr_encrypt		ce_aes_ctr_encrypt
+#define aes_xctr_encrypt	ce_aes_xctr_encrypt
+#define aes_xts_encrypt		ce_aes_xts_encrypt
+#define aes_xts_decrypt		ce_aes_xts_decrypt
+#define aes_mac_update		ce_aes_mac_update
+MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS/XCTR using ARMv8 Crypto Extensions");
+#else
+#define MODE			"neon"
+#define PRIO			200
+#define aes_ecb_encrypt		neon_aes_ecb_encrypt
+#define aes_ecb_decrypt		neon_aes_ecb_decrypt
+#define aes_cbc_encrypt		neon_aes_cbc_encrypt
+#define aes_cbc_decrypt		neon_aes_cbc_decrypt
+#define aes_cbc_cts_encrypt	neon_aes_cbc_cts_encrypt
+#define aes_cbc_cts_decrypt	neon_aes_cbc_cts_decrypt
+#define aes_essiv_cbc_encrypt	neon_aes_essiv_cbc_encrypt
+#define aes_essiv_cbc_decrypt	neon_aes_essiv_cbc_decrypt
+#define aes_ctr_encrypt		neon_aes_ctr_encrypt
+#define aes_xctr_encrypt	neon_aes_xctr_encrypt
+#define aes_xts_encrypt		neon_aes_xts_encrypt
+#define aes_xts_decrypt		neon_aes_xts_decrypt
+#define aes_mac_update		neon_aes_mac_update
+MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS/XCTR using ARMv8 NEON");
+#endif
+#if defined(USE_V8_CRYPTO_EXTENSIONS) || !IS_ENABLED(CONFIG_CRYPTO_AES_ARM64_BS)
+MODULE_ALIAS_CRYPTO("ecb(aes)");
+MODULE_ALIAS_CRYPTO("cbc(aes)");
+MODULE_ALIAS_CRYPTO("ctr(aes)");
+MODULE_ALIAS_CRYPTO("xts(aes)");
+MODULE_ALIAS_CRYPTO("xctr(aes)");
+#endif
+MODULE_ALIAS_CRYPTO("cts(cbc(aes))");
+MODULE_ALIAS_CRYPTO("essiv(cbc(aes),sha256)");
+MODULE_ALIAS_CRYPTO("cmac(aes)");
+MODULE_ALIAS_CRYPTO("xcbc(aes)");
+MODULE_ALIAS_CRYPTO("cbcmac(aes)");
+
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+
+/* defined in aes-modes.S */
+asmlinkage void aes_ecb_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int blocks);
+asmlinkage void aes_ecb_decrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int blocks);
+
+asmlinkage void aes_cbc_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int blocks, u8 iv[]);
+asmlinkage void aes_cbc_decrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int blocks, u8 iv[]);
+
+asmlinkage void aes_cbc_cts_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int bytes, u8 const iv[]);
+asmlinkage void aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int bytes, u8 const iv[]);
+
+asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				int rounds, int bytes, u8 ctr[]);
+
+asmlinkage void aes_xctr_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				 int rounds, int bytes, u8 ctr[], int byte_ctr);
+
+asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u32 const rk1[],
+				int rounds, int bytes, u32 const rk2[], u8 iv[],
+				int first);
+asmlinkage void aes_xts_decrypt(u8 out[], u8 const in[], u32 const rk1[],
+				int rounds, int bytes, u32 const rk2[], u8 iv[],
+				int first);
+
+asmlinkage void aes_essiv_cbc_encrypt(u8 out[], u8 const in[], u32 const rk1[],
+				      int rounds, int blocks, u8 iv[],
+				      u32 const rk2[]);
+asmlinkage void aes_essiv_cbc_decrypt(u8 out[], u8 const in[], u32 const rk1[],
+				      int rounds, int blocks, u8 iv[],
+				      u32 const rk2[]);
+
+asmlinkage int aes_mac_update(u8 const in[], u32 const rk[], int rounds,
+			      int blocks, u8 dg[], int enc_before,
+			      int enc_after);
+
+struct crypto_aes_xts_ctx {
+	struct crypto_aes_ctx key1;
+	struct crypto_aes_ctx __aligned(8) key2;
+};
+
+struct crypto_aes_essiv_cbc_ctx {
+	struct crypto_aes_ctx key1;
+	struct crypto_aes_ctx __aligned(8) key2;
+	struct crypto_shash *hash;
+};
+
+struct mac_tfm_ctx {
+	struct crypto_aes_ctx key;
+	u8 __aligned(8) consts[];
+};
+
+struct mac_desc_ctx {
+	unsigned int len;
+	u8 dg[AES_BLOCK_SIZE];
+};
+
+static int skcipher_aes_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+			       unsigned int key_len)
+{
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return aes_expandkey(ctx, in_key, key_len);
+}
+
+static int __maybe_unused xts_set_key(struct crypto_skcipher *tfm,
+				      const u8 *in_key, unsigned int key_len)
+{
+	struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int ret;
+
+	ret = xts_verify_key(tfm, in_key, key_len);
+	if (ret)
+		return ret;
+
+	ret = aes_expandkey(&ctx->key1, in_key, key_len / 2);
+	if (!ret)
+		ret = aes_expandkey(&ctx->key2, &in_key[key_len / 2],
+				    key_len / 2);
+	return ret;
+}
+
+static int __maybe_unused essiv_cbc_set_key(struct crypto_skcipher *tfm,
+					    const u8 *in_key,
+					    unsigned int key_len)
+{
+	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	u8 digest[SHA256_DIGEST_SIZE];
+	int ret;
+
+	ret = aes_expandkey(&ctx->key1, in_key, key_len);
+	if (ret)
+		return ret;
+
+	crypto_shash_tfm_digest(ctx->hash, in_key, key_len, digest);
+
+	return aes_expandkey(&ctx->key2, digest, sizeof(digest));
+}
+
+static int __maybe_unused ecb_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key_length / 4;
+	struct skcipher_walk walk;
+	unsigned int blocks;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) {
+		kernel_neon_begin();
+		aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				ctx->key_enc, rounds, blocks);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
+	}
+	return err;
+}
+
+static int __maybe_unused ecb_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key_length / 4;
+	struct skcipher_walk walk;
+	unsigned int blocks;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) {
+		kernel_neon_begin();
+		aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				ctx->key_dec, rounds, blocks);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
+	}
+	return err;
+}
+
+static int cbc_encrypt_walk(struct skcipher_request *req,
+			    struct skcipher_walk *walk)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err = 0, rounds = 6 + ctx->key_length / 4;
+	unsigned int blocks;
+
+	while ((blocks = (walk->nbytes / AES_BLOCK_SIZE))) {
+		kernel_neon_begin();
+		aes_cbc_encrypt(walk->dst.virt.addr, walk->src.virt.addr,
+				ctx->key_enc, rounds, blocks, walk->iv);
+		kernel_neon_end();
+		err = skcipher_walk_done(walk, walk->nbytes % AES_BLOCK_SIZE);
+	}
+	return err;
+}
+
+static int __maybe_unused cbc_encrypt(struct skcipher_request *req)
+{
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+	if (err)
+		return err;
+	return cbc_encrypt_walk(req, &walk);
+}
+
+static int cbc_decrypt_walk(struct skcipher_request *req,
+			    struct skcipher_walk *walk)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err = 0, rounds = 6 + ctx->key_length / 4;
+	unsigned int blocks;
+
+	while ((blocks = (walk->nbytes / AES_BLOCK_SIZE))) {
+		kernel_neon_begin();
+		aes_cbc_decrypt(walk->dst.virt.addr, walk->src.virt.addr,
+				ctx->key_dec, rounds, blocks, walk->iv);
+		kernel_neon_end();
+		err = skcipher_walk_done(walk, walk->nbytes % AES_BLOCK_SIZE);
+	}
+	return err;
+}
+
+static int __maybe_unused cbc_decrypt(struct skcipher_request *req)
+{
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+	if (err)
+		return err;
+	return cbc_decrypt_walk(req, &walk);
+}
+
+static int cts_cbc_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key_length / 4;
+	int cbc_blocks = DIV_ROUND_UP(req->cryptlen, AES_BLOCK_SIZE) - 2;
+	struct scatterlist *src = req->src, *dst = req->dst;
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct skcipher_walk walk;
+
+	skcipher_request_set_tfm(&subreq, tfm);
+	skcipher_request_set_callback(&subreq, skcipher_request_flags(req),
+				      NULL, NULL);
+
+	if (req->cryptlen <= AES_BLOCK_SIZE) {
+		if (req->cryptlen < AES_BLOCK_SIZE)
+			return -EINVAL;
+		cbc_blocks = 1;
+	}
+
+	if (cbc_blocks > 0) {
+		skcipher_request_set_crypt(&subreq, req->src, req->dst,
+					   cbc_blocks * AES_BLOCK_SIZE,
+					   req->iv);
+
+		err = skcipher_walk_virt(&walk, &subreq, false) ?:
+		      cbc_encrypt_walk(&subreq, &walk);
+		if (err)
+			return err;
+
+		if (req->cryptlen == AES_BLOCK_SIZE)
+			return 0;
+
+		dst = src = scatterwalk_ffwd(sg_src, req->src, subreq.cryptlen);
+		if (req->dst != req->src)
+			dst = scatterwalk_ffwd(sg_dst, req->dst,
+					       subreq.cryptlen);
+	}
+
+	/* handle ciphertext stealing */
+	skcipher_request_set_crypt(&subreq, src, dst,
+				   req->cryptlen - cbc_blocks * AES_BLOCK_SIZE,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, &subreq, false);
+	if (err)
+		return err;
+
+	kernel_neon_begin();
+	aes_cbc_cts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+			    ctx->key_enc, rounds, walk.nbytes, walk.iv);
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static int cts_cbc_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key_length / 4;
+	int cbc_blocks = DIV_ROUND_UP(req->cryptlen, AES_BLOCK_SIZE) - 2;
+	struct scatterlist *src = req->src, *dst = req->dst;
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct skcipher_walk walk;
+
+	skcipher_request_set_tfm(&subreq, tfm);
+	skcipher_request_set_callback(&subreq, skcipher_request_flags(req),
+				      NULL, NULL);
+
+	if (req->cryptlen <= AES_BLOCK_SIZE) {
+		if (req->cryptlen < AES_BLOCK_SIZE)
+			return -EINVAL;
+		cbc_blocks = 1;
+	}
+
+	if (cbc_blocks > 0) {
+		skcipher_request_set_crypt(&subreq, req->src, req->dst,
+					   cbc_blocks * AES_BLOCK_SIZE,
+					   req->iv);
+
+		err = skcipher_walk_virt(&walk, &subreq, false) ?:
+		      cbc_decrypt_walk(&subreq, &walk);
+		if (err)
+			return err;
+
+		if (req->cryptlen == AES_BLOCK_SIZE)
+			return 0;
+
+		dst = src = scatterwalk_ffwd(sg_src, req->src, subreq.cryptlen);
+		if (req->dst != req->src)
+			dst = scatterwalk_ffwd(sg_dst, req->dst,
+					       subreq.cryptlen);
+	}
+
+	/* handle ciphertext stealing */
+	skcipher_request_set_crypt(&subreq, src, dst,
+				   req->cryptlen - cbc_blocks * AES_BLOCK_SIZE,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, &subreq, false);
+	if (err)
+		return err;
+
+	kernel_neon_begin();
+	aes_cbc_cts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+			    ctx->key_dec, rounds, walk.nbytes, walk.iv);
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static int __maybe_unused essiv_cbc_init_tfm(struct crypto_skcipher *tfm)
+{
+	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	ctx->hash = crypto_alloc_shash("sha256", 0, 0);
+
+	return PTR_ERR_OR_ZERO(ctx->hash);
+}
+
+static void __maybe_unused essiv_cbc_exit_tfm(struct crypto_skcipher *tfm)
+{
+	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	crypto_free_shash(ctx->hash);
+}
+
+static int __maybe_unused essiv_cbc_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key1.key_length / 4;
+	struct skcipher_walk walk;
+	unsigned int blocks;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	blocks = walk.nbytes / AES_BLOCK_SIZE;
+	if (blocks) {
+		kernel_neon_begin();
+		aes_essiv_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				      ctx->key1.key_enc, rounds, blocks,
+				      req->iv, ctx->key2.key_enc);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
+	}
+	return err ?: cbc_encrypt_walk(req, &walk);
+}
+
+static int __maybe_unused essiv_cbc_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_essiv_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key1.key_length / 4;
+	struct skcipher_walk walk;
+	unsigned int blocks;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	blocks = walk.nbytes / AES_BLOCK_SIZE;
+	if (blocks) {
+		kernel_neon_begin();
+		aes_essiv_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				      ctx->key1.key_dec, rounds, blocks,
+				      req->iv, ctx->key2.key_enc);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
+	}
+	return err ?: cbc_decrypt_walk(req, &walk);
+}
+
+static int __maybe_unused xctr_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key_length / 4;
+	struct skcipher_walk walk;
+	unsigned int byte_ctr = 0;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while (walk.nbytes > 0) {
+		const u8 *src = walk.src.virt.addr;
+		unsigned int nbytes = walk.nbytes;
+		u8 *dst = walk.dst.virt.addr;
+		u8 buf[AES_BLOCK_SIZE];
+
+		/*
+		 * If given less than 16 bytes, we must copy the partial block
+		 * into a temporary buffer of 16 bytes to avoid out of bounds
+		 * reads and writes.  Furthermore, this code is somewhat unusual
+		 * in that it expects the end of the data to be at the end of
+		 * the temporary buffer, rather than the start of the data at
+		 * the start of the temporary buffer.
+		 */
+		if (unlikely(nbytes < AES_BLOCK_SIZE))
+			src = dst = memcpy(buf + sizeof(buf) - nbytes,
+					   src, nbytes);
+		else if (nbytes < walk.total)
+			nbytes &= ~(AES_BLOCK_SIZE - 1);
+
+		kernel_neon_begin();
+		aes_xctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
+						 walk.iv, byte_ctr);
+		kernel_neon_end();
+
+		if (unlikely(nbytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - nbytes, nbytes);
+		byte_ctr += nbytes;
+
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	}
+
+	return err;
+}
+
+static int __maybe_unused ctr_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, rounds = 6 + ctx->key_length / 4;
+	struct skcipher_walk walk;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while (walk.nbytes > 0) {
+		const u8 *src = walk.src.virt.addr;
+		unsigned int nbytes = walk.nbytes;
+		u8 *dst = walk.dst.virt.addr;
+		u8 buf[AES_BLOCK_SIZE];
+
+		/*
+		 * If given less than 16 bytes, we must copy the partial block
+		 * into a temporary buffer of 16 bytes to avoid out of bounds
+		 * reads and writes.  Furthermore, this code is somewhat unusual
+		 * in that it expects the end of the data to be at the end of
+		 * the temporary buffer, rather than the start of the data at
+		 * the start of the temporary buffer.
+		 */
+		if (unlikely(nbytes < AES_BLOCK_SIZE))
+			src = dst = memcpy(buf + sizeof(buf) - nbytes,
+					   src, nbytes);
+		else if (nbytes < walk.total)
+			nbytes &= ~(AES_BLOCK_SIZE - 1);
+
+		kernel_neon_begin();
+		aes_ctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
+				walk.iv);
+		kernel_neon_end();
+
+		if (unlikely(nbytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - nbytes, nbytes);
+
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	}
+
+	return err;
+}
+
+static int __maybe_unused xts_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, first, rounds = 6 + ctx->key1.key_length / 4;
+	int tail = req->cryptlen % AES_BLOCK_SIZE;
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct scatterlist *src, *dst;
+	struct skcipher_walk walk;
+
+	if (req->cryptlen < AES_BLOCK_SIZE)
+		return -EINVAL;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	if (unlikely(tail > 0 && walk.nbytes < walk.total)) {
+		int xts_blocks = DIV_ROUND_UP(req->cryptlen,
+					      AES_BLOCK_SIZE) - 2;
+
+		skcipher_walk_abort(&walk);
+
+		skcipher_request_set_tfm(&subreq, tfm);
+		skcipher_request_set_callback(&subreq,
+					      skcipher_request_flags(req),
+					      NULL, NULL);
+		skcipher_request_set_crypt(&subreq, req->src, req->dst,
+					   xts_blocks * AES_BLOCK_SIZE,
+					   req->iv);
+		req = &subreq;
+		err = skcipher_walk_virt(&walk, req, false);
+	} else {
+		tail = 0;
+	}
+
+	for (first = 1; walk.nbytes >= AES_BLOCK_SIZE; first = 0) {
+		int nbytes = walk.nbytes;
+
+		if (walk.nbytes < walk.total)
+			nbytes &= ~(AES_BLOCK_SIZE - 1);
+
+		kernel_neon_begin();
+		aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				ctx->key1.key_enc, rounds, nbytes,
+				ctx->key2.key_enc, walk.iv, first);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	}
+
+	if (err || likely(!tail))
+		return err;
+
+	dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen);
+	if (req->dst != req->src)
+		dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen);
+
+	skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, &subreq, false);
+	if (err)
+		return err;
+
+	kernel_neon_begin();
+	aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+			ctx->key1.key_enc, rounds, walk.nbytes,
+			ctx->key2.key_enc, walk.iv, first);
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static int __maybe_unused xts_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct crypto_aes_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int err, first, rounds = 6 + ctx->key1.key_length / 4;
+	int tail = req->cryptlen % AES_BLOCK_SIZE;
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct scatterlist *src, *dst;
+	struct skcipher_walk walk;
+
+	if (req->cryptlen < AES_BLOCK_SIZE)
+		return -EINVAL;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	if (unlikely(tail > 0 && walk.nbytes < walk.total)) {
+		int xts_blocks = DIV_ROUND_UP(req->cryptlen,
+					      AES_BLOCK_SIZE) - 2;
+
+		skcipher_walk_abort(&walk);
+
+		skcipher_request_set_tfm(&subreq, tfm);
+		skcipher_request_set_callback(&subreq,
+					      skcipher_request_flags(req),
+					      NULL, NULL);
+		skcipher_request_set_crypt(&subreq, req->src, req->dst,
+					   xts_blocks * AES_BLOCK_SIZE,
+					   req->iv);
+		req = &subreq;
+		err = skcipher_walk_virt(&walk, req, false);
+	} else {
+		tail = 0;
+	}
+
+	for (first = 1; walk.nbytes >= AES_BLOCK_SIZE; first = 0) {
+		int nbytes = walk.nbytes;
+
+		if (walk.nbytes < walk.total)
+			nbytes &= ~(AES_BLOCK_SIZE - 1);
+
+		kernel_neon_begin();
+		aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				ctx->key1.key_dec, rounds, nbytes,
+				ctx->key2.key_enc, walk.iv, first);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	}
+
+	if (err || likely(!tail))
+		return err;
+
+	dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen);
+	if (req->dst != req->src)
+		dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen);
+
+	skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, &subreq, false);
+	if (err)
+		return err;
+
+
+	kernel_neon_begin();
+	aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+			ctx->key1.key_dec, rounds, walk.nbytes,
+			ctx->key2.key_enc, walk.iv, first);
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static struct skcipher_alg aes_algs[] = { {
+#if defined(USE_V8_CRYPTO_EXTENSIONS) || !IS_ENABLED(CONFIG_CRYPTO_AES_ARM64_BS)
+	.base = {
+		.cra_name		= "ecb(aes)",
+		.cra_driver_name	= "ecb-aes-" MODE,
+		.cra_priority		= PRIO,
+		.cra_blocksize		= AES_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= AES_MIN_KEY_SIZE,
+	.max_keysize	= AES_MAX_KEY_SIZE,
+	.setkey		= skcipher_aes_setkey,
+	.encrypt	= ecb_encrypt,
+	.decrypt	= ecb_decrypt,
+}, {
+	.base = {
+		.cra_name		= "cbc(aes)",
+		.cra_driver_name	= "cbc-aes-" MODE,
+		.cra_priority		= PRIO,
+		.cra_blocksize		= AES_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= AES_MIN_KEY_SIZE,
+	.max_keysize	= AES_MAX_KEY_SIZE,
+	.ivsize		= AES_BLOCK_SIZE,
+	.setkey		= skcipher_aes_setkey,
+	.encrypt	= cbc_encrypt,
+	.decrypt	= cbc_decrypt,
+}, {
+	.base = {
+		.cra_name		= "ctr(aes)",
+		.cra_driver_name	= "ctr-aes-" MODE,
+		.cra_priority		= PRIO,
+		.cra_blocksize		= 1,
+		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= AES_MIN_KEY_SIZE,
+	.max_keysize	= AES_MAX_KEY_SIZE,
+	.ivsize		= AES_BLOCK_SIZE,
+	.chunksize	= AES_BLOCK_SIZE,
+	.setkey		= skcipher_aes_setkey,
+	.encrypt	= ctr_encrypt,
+	.decrypt	= ctr_encrypt,
+}, {
+	.base = {
+		.cra_name		= "xctr(aes)",
+		.cra_driver_name	= "xctr-aes-" MODE,
+		.cra_priority		= PRIO,
+		.cra_blocksize		= 1,
+		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= AES_MIN_KEY_SIZE,
+	.max_keysize	= AES_MAX_KEY_SIZE,
+	.ivsize		= AES_BLOCK_SIZE,
+	.chunksize	= AES_BLOCK_SIZE,
+	.setkey		= skcipher_aes_setkey,
+	.encrypt	= xctr_encrypt,
+	.decrypt	= xctr_encrypt,
+}, {
+	.base = {
+		.cra_name		= "xts(aes)",
+		.cra_driver_name	= "xts-aes-" MODE,
+		.cra_priority		= PRIO,
+		.cra_blocksize		= AES_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct crypto_aes_xts_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= 2 * AES_MIN_KEY_SIZE,
+	.max_keysize	= 2 * AES_MAX_KEY_SIZE,
+	.ivsize		= AES_BLOCK_SIZE,
+	.walksize	= 2 * AES_BLOCK_SIZE,
+	.setkey		= xts_set_key,
+	.encrypt	= xts_encrypt,
+	.decrypt	= xts_decrypt,
+}, {
+#endif
+	.base = {
+		.cra_name		= "cts(cbc(aes))",
+		.cra_driver_name	= "cts-cbc-aes-" MODE,
+		.cra_priority		= PRIO,
+		.cra_blocksize		= AES_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= AES_MIN_KEY_SIZE,
+	.max_keysize	= AES_MAX_KEY_SIZE,
+	.ivsize		= AES_BLOCK_SIZE,
+	.walksize	= 2 * AES_BLOCK_SIZE,
+	.setkey		= skcipher_aes_setkey,
+	.encrypt	= cts_cbc_encrypt,
+	.decrypt	= cts_cbc_decrypt,
+}, {
+	.base = {
+		.cra_name		= "essiv(cbc(aes),sha256)",
+		.cra_driver_name	= "essiv-cbc-aes-sha256-" MODE,
+		.cra_priority		= PRIO + 1,
+		.cra_blocksize		= AES_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct crypto_aes_essiv_cbc_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.min_keysize	= AES_MIN_KEY_SIZE,
+	.max_keysize	= AES_MAX_KEY_SIZE,
+	.ivsize		= AES_BLOCK_SIZE,
+	.setkey		= essiv_cbc_set_key,
+	.encrypt	= essiv_cbc_encrypt,
+	.decrypt	= essiv_cbc_decrypt,
+	.init		= essiv_cbc_init_tfm,
+	.exit		= essiv_cbc_exit_tfm,
+} };
+
+static int cbcmac_setkey(struct crypto_shash *tfm, const u8 *in_key,
+			 unsigned int key_len)
+{
+	struct mac_tfm_ctx *ctx = crypto_shash_ctx(tfm);
+
+	return aes_expandkey(&ctx->key, in_key, key_len);
+}
+
+static void cmac_gf128_mul_by_x(be128 *y, const be128 *x)
+{
+	u64 a = be64_to_cpu(x->a);
+	u64 b = be64_to_cpu(x->b);
+
+	y->a = cpu_to_be64((a << 1) | (b >> 63));
+	y->b = cpu_to_be64((b << 1) ^ ((a >> 63) ? 0x87 : 0));
+}
+
+static int cmac_setkey(struct crypto_shash *tfm, const u8 *in_key,
+		       unsigned int key_len)
+{
+	struct mac_tfm_ctx *ctx = crypto_shash_ctx(tfm);
+	be128 *consts = (be128 *)ctx->consts;
+	int rounds = 6 + key_len / 4;
+	int err;
+
+	err = cbcmac_setkey(tfm, in_key, key_len);
+	if (err)
+		return err;
+
+	/* encrypt the zero vector */
+	kernel_neon_begin();
+	aes_ecb_encrypt(ctx->consts, (u8[AES_BLOCK_SIZE]){}, ctx->key.key_enc,
+			rounds, 1);
+	kernel_neon_end();
+
+	cmac_gf128_mul_by_x(consts, consts);
+	cmac_gf128_mul_by_x(consts + 1, consts);
+
+	return 0;
+}
+
+static int xcbc_setkey(struct crypto_shash *tfm, const u8 *in_key,
+		       unsigned int key_len)
+{
+	static u8 const ks[3][AES_BLOCK_SIZE] = {
+		{ [0 ... AES_BLOCK_SIZE - 1] = 0x1 },
+		{ [0 ... AES_BLOCK_SIZE - 1] = 0x2 },
+		{ [0 ... AES_BLOCK_SIZE - 1] = 0x3 },
+	};
+
+	struct mac_tfm_ctx *ctx = crypto_shash_ctx(tfm);
+	int rounds = 6 + key_len / 4;
+	u8 key[AES_BLOCK_SIZE];
+	int err;
+
+	err = cbcmac_setkey(tfm, in_key, key_len);
+	if (err)
+		return err;
+
+	kernel_neon_begin();
+	aes_ecb_encrypt(key, ks[0], ctx->key.key_enc, rounds, 1);
+	aes_ecb_encrypt(ctx->consts, ks[1], ctx->key.key_enc, rounds, 2);
+	kernel_neon_end();
+
+	return cbcmac_setkey(tfm, key, sizeof(key));
+}
+
+static int mac_init(struct shash_desc *desc)
+{
+	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	memset(ctx->dg, 0, AES_BLOCK_SIZE);
+	ctx->len = 0;
+
+	return 0;
+}
+
+static void mac_do_update(struct crypto_aes_ctx *ctx, u8 const in[], int blocks,
+			  u8 dg[], int enc_before, int enc_after)
+{
+	int rounds = 6 + ctx->key_length / 4;
+
+	if (crypto_simd_usable()) {
+		int rem;
+
+		do {
+			kernel_neon_begin();
+			rem = aes_mac_update(in, ctx->key_enc, rounds, blocks,
+					     dg, enc_before, enc_after);
+			kernel_neon_end();
+			in += (blocks - rem) * AES_BLOCK_SIZE;
+			blocks = rem;
+			enc_before = 0;
+		} while (blocks);
+	} else {
+		if (enc_before)
+			aes_encrypt(ctx, dg, dg);
+
+		while (blocks--) {
+			crypto_xor(dg, in, AES_BLOCK_SIZE);
+			in += AES_BLOCK_SIZE;
+
+			if (blocks || enc_after)
+				aes_encrypt(ctx, dg, dg);
+		}
+	}
+}
+
+static int mac_update(struct shash_desc *desc, const u8 *p, unsigned int len)
+{
+	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	while (len > 0) {
+		unsigned int l;
+
+		if ((ctx->len % AES_BLOCK_SIZE) == 0 &&
+		    (ctx->len + len) > AES_BLOCK_SIZE) {
+
+			int blocks = len / AES_BLOCK_SIZE;
+
+			len %= AES_BLOCK_SIZE;
+
+			mac_do_update(&tctx->key, p, blocks, ctx->dg,
+				      (ctx->len != 0), (len != 0));
+
+			p += blocks * AES_BLOCK_SIZE;
+
+			if (!len) {
+				ctx->len = AES_BLOCK_SIZE;
+				break;
+			}
+			ctx->len = 0;
+		}
+
+		l = min(len, AES_BLOCK_SIZE - ctx->len);
+
+		if (l <= AES_BLOCK_SIZE) {
+			crypto_xor(ctx->dg + ctx->len, p, l);
+			ctx->len += l;
+			len -= l;
+			p += l;
+		}
+	}
+
+	return 0;
+}
+
+static int cbcmac_final(struct shash_desc *desc, u8 *out)
+{
+	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	mac_do_update(&tctx->key, NULL, 0, ctx->dg, (ctx->len != 0), 0);
+
+	memcpy(out, ctx->dg, AES_BLOCK_SIZE);
+
+	return 0;
+}
+
+static int cmac_final(struct shash_desc *desc, u8 *out)
+{
+	struct mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	struct mac_desc_ctx *ctx = shash_desc_ctx(desc);
+	u8 *consts = tctx->consts;
+
+	if (ctx->len != AES_BLOCK_SIZE) {
+		ctx->dg[ctx->len] ^= 0x80;
+		consts += AES_BLOCK_SIZE;
+	}
+
+	mac_do_update(&tctx->key, consts, 1, ctx->dg, 0, 1);
+
+	memcpy(out, ctx->dg, AES_BLOCK_SIZE);
+
+	return 0;
+}
+
+static struct shash_alg mac_algs[] = { {
+	.base.cra_name		= "cmac(aes)",
+	.base.cra_driver_name	= "cmac-aes-" MODE,
+	.base.cra_priority	= PRIO,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
+	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx) +
+				  2 * AES_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+
+	.digestsize		= AES_BLOCK_SIZE,
+	.init			= mac_init,
+	.update			= mac_update,
+	.final			= cmac_final,
+	.setkey			= cmac_setkey,
+	.descsize		= sizeof(struct mac_desc_ctx),
+}, {
+	.base.cra_name		= "xcbc(aes)",
+	.base.cra_driver_name	= "xcbc-aes-" MODE,
+	.base.cra_priority	= PRIO,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
+	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx) +
+				  2 * AES_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+
+	.digestsize		= AES_BLOCK_SIZE,
+	.init			= mac_init,
+	.update			= mac_update,
+	.final			= cmac_final,
+	.setkey			= xcbc_setkey,
+	.descsize		= sizeof(struct mac_desc_ctx),
+}, {
+	.base.cra_name		= "cbcmac(aes)",
+	.base.cra_driver_name	= "cbcmac-aes-" MODE,
+	.base.cra_priority	= PRIO,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct mac_tfm_ctx),
+	.base.cra_module	= THIS_MODULE,
+
+	.digestsize		= AES_BLOCK_SIZE,
+	.init			= mac_init,
+	.update			= mac_update,
+	.final			= cbcmac_final,
+	.setkey			= cbcmac_setkey,
+	.descsize		= sizeof(struct mac_desc_ctx),
+} };
+
+static void aes_exit(void)
+{
+	crypto_unregister_shashes(mac_algs, ARRAY_SIZE(mac_algs));
+	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+}
+
+static int __init aes_init(void)
+{
+	int err;
+
+	err = crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+	if (err)
+		return err;
+
+	err = crypto_register_shashes(mac_algs, ARRAY_SIZE(mac_algs));
+	if (err)
+		goto unregister_ciphers;
+
+	return 0;
+
+unregister_ciphers:
+	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+	return err;
+}
+
+#ifdef USE_V8_CRYPTO_EXTENSIONS
+module_cpu_feature_match(AES, aes_init);
+#else
+module_init(aes_init);
+EXPORT_SYMBOL(neon_aes_ecb_encrypt);
+EXPORT_SYMBOL(neon_aes_cbc_encrypt);
+EXPORT_SYMBOL(neon_aes_ctr_encrypt);
+EXPORT_SYMBOL(neon_aes_xts_encrypt);
+EXPORT_SYMBOL(neon_aes_xts_decrypt);
+#endif
+module_exit(aes_exit);
diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S
new file mode 100644
index 000000000..0e834a2c0
--- /dev/null
+++ b/arch/arm64/crypto/aes-modes.S
@@ -0,0 +1,866 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/arch/arm64/crypto/aes-modes.S - chaining mode wrappers for AES
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+/* included by aes-ce.S and aes-neon.S */
+
+	.text
+	.align		4
+
+#ifndef MAX_STRIDE
+#define MAX_STRIDE	4
+#endif
+
+#if MAX_STRIDE == 4
+#define ST4(x...) x
+#define ST5(x...)
+#else
+#define ST4(x...)
+#define ST5(x...) x
+#endif
+
+SYM_FUNC_START_LOCAL(aes_encrypt_block4x)
+	encrypt_block4x	v0, v1, v2, v3, w3, x2, x8, w7
+	ret
+SYM_FUNC_END(aes_encrypt_block4x)
+
+SYM_FUNC_START_LOCAL(aes_decrypt_block4x)
+	decrypt_block4x	v0, v1, v2, v3, w3, x2, x8, w7
+	ret
+SYM_FUNC_END(aes_decrypt_block4x)
+
+#if MAX_STRIDE == 5
+SYM_FUNC_START_LOCAL(aes_encrypt_block5x)
+	encrypt_block5x	v0, v1, v2, v3, v4, w3, x2, x8, w7
+	ret
+SYM_FUNC_END(aes_encrypt_block5x)
+
+SYM_FUNC_START_LOCAL(aes_decrypt_block5x)
+	decrypt_block5x	v0, v1, v2, v3, v4, w3, x2, x8, w7
+	ret
+SYM_FUNC_END(aes_decrypt_block5x)
+#endif
+
+	/*
+	 * aes_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		   int blocks)
+	 * aes_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		   int blocks)
+	 */
+
+AES_FUNC_START(aes_ecb_encrypt)
+	frame_push	0
+
+	enc_prepare	w3, x2, x5
+
+.LecbencloopNx:
+	subs		w4, w4, #MAX_STRIDE
+	bmi		.Lecbenc1x
+	ld1		{v0.16b-v3.16b}, [x1], #64	/* get 4 pt blocks */
+ST4(	bl		aes_encrypt_block4x		)
+ST5(	ld1		{v4.16b}, [x1], #16		)
+ST5(	bl		aes_encrypt_block5x		)
+	st1		{v0.16b-v3.16b}, [x0], #64
+ST5(	st1		{v4.16b}, [x0], #16		)
+	b		.LecbencloopNx
+.Lecbenc1x:
+	adds		w4, w4, #MAX_STRIDE
+	beq		.Lecbencout
+.Lecbencloop:
+	ld1		{v0.16b}, [x1], #16		/* get next pt block */
+	encrypt_block	v0, w3, x2, x5, w6
+	st1		{v0.16b}, [x0], #16
+	subs		w4, w4, #1
+	bne		.Lecbencloop
+.Lecbencout:
+	frame_pop
+	ret
+AES_FUNC_END(aes_ecb_encrypt)
+
+
+AES_FUNC_START(aes_ecb_decrypt)
+	frame_push	0
+
+	dec_prepare	w3, x2, x5
+
+.LecbdecloopNx:
+	subs		w4, w4, #MAX_STRIDE
+	bmi		.Lecbdec1x
+	ld1		{v0.16b-v3.16b}, [x1], #64	/* get 4 ct blocks */
+ST4(	bl		aes_decrypt_block4x		)
+ST5(	ld1		{v4.16b}, [x1], #16		)
+ST5(	bl		aes_decrypt_block5x		)
+	st1		{v0.16b-v3.16b}, [x0], #64
+ST5(	st1		{v4.16b}, [x0], #16		)
+	b		.LecbdecloopNx
+.Lecbdec1x:
+	adds		w4, w4, #MAX_STRIDE
+	beq		.Lecbdecout
+.Lecbdecloop:
+	ld1		{v0.16b}, [x1], #16		/* get next ct block */
+	decrypt_block	v0, w3, x2, x5, w6
+	st1		{v0.16b}, [x0], #16
+	subs		w4, w4, #1
+	bne		.Lecbdecloop
+.Lecbdecout:
+	frame_pop
+	ret
+AES_FUNC_END(aes_ecb_decrypt)
+
+
+	/*
+	 * aes_cbc_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		   int blocks, u8 iv[])
+	 * aes_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		   int blocks, u8 iv[])
+	 * aes_essiv_cbc_encrypt(u8 out[], u8 const in[], u32 const rk1[],
+	 *			 int rounds, int blocks, u8 iv[],
+	 *			 u32 const rk2[]);
+	 * aes_essiv_cbc_decrypt(u8 out[], u8 const in[], u32 const rk1[],
+	 *			 int rounds, int blocks, u8 iv[],
+	 *			 u32 const rk2[]);
+	 */
+
+AES_FUNC_START(aes_essiv_cbc_encrypt)
+	ld1		{v4.16b}, [x5]			/* get iv */
+
+	mov		w8, #14				/* AES-256: 14 rounds */
+	enc_prepare	w8, x6, x7
+	encrypt_block	v4, w8, x6, x7, w9
+	enc_switch_key	w3, x2, x6
+	b		.Lcbcencloop4x
+
+AES_FUNC_START(aes_cbc_encrypt)
+	ld1		{v4.16b}, [x5]			/* get iv */
+	enc_prepare	w3, x2, x6
+
+.Lcbcencloop4x:
+	subs		w4, w4, #4
+	bmi		.Lcbcenc1x
+	ld1		{v0.16b-v3.16b}, [x1], #64	/* get 4 pt blocks */
+	eor		v0.16b, v0.16b, v4.16b		/* ..and xor with iv */
+	encrypt_block	v0, w3, x2, x6, w7
+	eor		v1.16b, v1.16b, v0.16b
+	encrypt_block	v1, w3, x2, x6, w7
+	eor		v2.16b, v2.16b, v1.16b
+	encrypt_block	v2, w3, x2, x6, w7
+	eor		v3.16b, v3.16b, v2.16b
+	encrypt_block	v3, w3, x2, x6, w7
+	st1		{v0.16b-v3.16b}, [x0], #64
+	mov		v4.16b, v3.16b
+	b		.Lcbcencloop4x
+.Lcbcenc1x:
+	adds		w4, w4, #4
+	beq		.Lcbcencout
+.Lcbcencloop:
+	ld1		{v0.16b}, [x1], #16		/* get next pt block */
+	eor		v4.16b, v4.16b, v0.16b		/* ..and xor with iv */
+	encrypt_block	v4, w3, x2, x6, w7
+	st1		{v4.16b}, [x0], #16
+	subs		w4, w4, #1
+	bne		.Lcbcencloop
+.Lcbcencout:
+	st1		{v4.16b}, [x5]			/* return iv */
+	ret
+AES_FUNC_END(aes_cbc_encrypt)
+AES_FUNC_END(aes_essiv_cbc_encrypt)
+
+AES_FUNC_START(aes_essiv_cbc_decrypt)
+	ld1		{cbciv.16b}, [x5]		/* get iv */
+
+	mov		w8, #14				/* AES-256: 14 rounds */
+	enc_prepare	w8, x6, x7
+	encrypt_block	cbciv, w8, x6, x7, w9
+	b		.Lessivcbcdecstart
+
+AES_FUNC_START(aes_cbc_decrypt)
+	ld1		{cbciv.16b}, [x5]		/* get iv */
+.Lessivcbcdecstart:
+	frame_push	0
+	dec_prepare	w3, x2, x6
+
+.LcbcdecloopNx:
+	subs		w4, w4, #MAX_STRIDE
+	bmi		.Lcbcdec1x
+	ld1		{v0.16b-v3.16b}, [x1], #64	/* get 4 ct blocks */
+#if MAX_STRIDE == 5
+	ld1		{v4.16b}, [x1], #16		/* get 1 ct block */
+	mov		v5.16b, v0.16b
+	mov		v6.16b, v1.16b
+	mov		v7.16b, v2.16b
+	bl		aes_decrypt_block5x
+	sub		x1, x1, #32
+	eor		v0.16b, v0.16b, cbciv.16b
+	eor		v1.16b, v1.16b, v5.16b
+	ld1		{v5.16b}, [x1], #16		/* reload 1 ct block */
+	ld1		{cbciv.16b}, [x1], #16		/* reload 1 ct block */
+	eor		v2.16b, v2.16b, v6.16b
+	eor		v3.16b, v3.16b, v7.16b
+	eor		v4.16b, v4.16b, v5.16b
+#else
+	mov		v4.16b, v0.16b
+	mov		v5.16b, v1.16b
+	mov		v6.16b, v2.16b
+	bl		aes_decrypt_block4x
+	sub		x1, x1, #16
+	eor		v0.16b, v0.16b, cbciv.16b
+	eor		v1.16b, v1.16b, v4.16b
+	ld1		{cbciv.16b}, [x1], #16		/* reload 1 ct block */
+	eor		v2.16b, v2.16b, v5.16b
+	eor		v3.16b, v3.16b, v6.16b
+#endif
+	st1		{v0.16b-v3.16b}, [x0], #64
+ST5(	st1		{v4.16b}, [x0], #16		)
+	b		.LcbcdecloopNx
+.Lcbcdec1x:
+	adds		w4, w4, #MAX_STRIDE
+	beq		.Lcbcdecout
+.Lcbcdecloop:
+	ld1		{v1.16b}, [x1], #16		/* get next ct block */
+	mov		v0.16b, v1.16b			/* ...and copy to v0 */
+	decrypt_block	v0, w3, x2, x6, w7
+	eor		v0.16b, v0.16b, cbciv.16b	/* xor with iv => pt */
+	mov		cbciv.16b, v1.16b		/* ct is next iv */
+	st1		{v0.16b}, [x0], #16
+	subs		w4, w4, #1
+	bne		.Lcbcdecloop
+.Lcbcdecout:
+	st1		{cbciv.16b}, [x5]		/* return iv */
+	frame_pop
+	ret
+AES_FUNC_END(aes_cbc_decrypt)
+AES_FUNC_END(aes_essiv_cbc_decrypt)
+
+
+	/*
+	 * aes_cbc_cts_encrypt(u8 out[], u8 const in[], u32 const rk[],
+	 *		       int rounds, int bytes, u8 const iv[])
+	 * aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[],
+	 *		       int rounds, int bytes, u8 const iv[])
+	 */
+
+AES_FUNC_START(aes_cbc_cts_encrypt)
+	adr_l		x8, .Lcts_permute_table
+	sub		x4, x4, #16
+	add		x9, x8, #32
+	add		x8, x8, x4
+	sub		x9, x9, x4
+	ld1		{v3.16b}, [x8]
+	ld1		{v4.16b}, [x9]
+
+	ld1		{v0.16b}, [x1], x4		/* overlapping loads */
+	ld1		{v1.16b}, [x1]
+
+	ld1		{v5.16b}, [x5]			/* get iv */
+	enc_prepare	w3, x2, x6
+
+	eor		v0.16b, v0.16b, v5.16b		/* xor with iv */
+	tbl		v1.16b, {v1.16b}, v4.16b
+	encrypt_block	v0, w3, x2, x6, w7
+
+	eor		v1.16b, v1.16b, v0.16b
+	tbl		v0.16b, {v0.16b}, v3.16b
+	encrypt_block	v1, w3, x2, x6, w7
+
+	add		x4, x0, x4
+	st1		{v0.16b}, [x4]			/* overlapping stores */
+	st1		{v1.16b}, [x0]
+	ret
+AES_FUNC_END(aes_cbc_cts_encrypt)
+
+AES_FUNC_START(aes_cbc_cts_decrypt)
+	adr_l		x8, .Lcts_permute_table
+	sub		x4, x4, #16
+	add		x9, x8, #32
+	add		x8, x8, x4
+	sub		x9, x9, x4
+	ld1		{v3.16b}, [x8]
+	ld1		{v4.16b}, [x9]
+
+	ld1		{v0.16b}, [x1], x4		/* overlapping loads */
+	ld1		{v1.16b}, [x1]
+
+	ld1		{v5.16b}, [x5]			/* get iv */
+	dec_prepare	w3, x2, x6
+
+	decrypt_block	v0, w3, x2, x6, w7
+	tbl		v2.16b, {v0.16b}, v3.16b
+	eor		v2.16b, v2.16b, v1.16b
+
+	tbx		v0.16b, {v1.16b}, v4.16b
+	decrypt_block	v0, w3, x2, x6, w7
+	eor		v0.16b, v0.16b, v5.16b		/* xor with iv */
+
+	add		x4, x0, x4
+	st1		{v2.16b}, [x4]			/* overlapping stores */
+	st1		{v0.16b}, [x0]
+	ret
+AES_FUNC_END(aes_cbc_cts_decrypt)
+
+	.section	".rodata", "a"
+	.align		6
+.Lcts_permute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe,  0xf
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.previous
+
+	/*
+	 * This macro generates the code for CTR and XCTR mode.
+	 */
+.macro ctr_encrypt xctr
+	// Arguments
+	OUT		.req x0
+	IN		.req x1
+	KEY		.req x2
+	ROUNDS_W	.req w3
+	BYTES_W		.req w4
+	IV		.req x5
+	BYTE_CTR_W 	.req w6		// XCTR only
+	// Intermediate values
+	CTR_W		.req w11	// XCTR only
+	CTR		.req x11	// XCTR only
+	IV_PART		.req x12
+	BLOCKS		.req x13
+	BLOCKS_W	.req w13
+
+	frame_push	0
+
+	enc_prepare	ROUNDS_W, KEY, IV_PART
+	ld1		{vctr.16b}, [IV]
+
+	/*
+	 * Keep 64 bits of the IV in a register.  For CTR mode this lets us
+	 * easily increment the IV.  For XCTR mode this lets us efficiently XOR
+	 * the 64-bit counter with the IV.
+	 */
+	.if \xctr
+		umov		IV_PART, vctr.d[0]
+		lsr		CTR_W, BYTE_CTR_W, #4
+	.else
+		umov		IV_PART, vctr.d[1]
+		rev		IV_PART, IV_PART
+	.endif
+
+.LctrloopNx\xctr:
+	add		BLOCKS_W, BYTES_W, #15
+	sub		BYTES_W, BYTES_W, #MAX_STRIDE << 4
+	lsr		BLOCKS_W, BLOCKS_W, #4
+	mov		w8, #MAX_STRIDE
+	cmp		BLOCKS_W, w8
+	csel		BLOCKS_W, BLOCKS_W, w8, lt
+
+	/*
+	 * Set up the counter values in v0-v{MAX_STRIDE-1}.
+	 *
+	 * If we are encrypting less than MAX_STRIDE blocks, the tail block
+	 * handling code expects the last keystream block to be in
+	 * v{MAX_STRIDE-1}.  For example: if encrypting two blocks with
+	 * MAX_STRIDE=5, then v3 and v4 should have the next two counter blocks.
+	 */
+	.if \xctr
+		add		CTR, CTR, BLOCKS
+	.else
+		adds		IV_PART, IV_PART, BLOCKS
+	.endif
+	mov		v0.16b, vctr.16b
+	mov		v1.16b, vctr.16b
+	mov		v2.16b, vctr.16b
+	mov		v3.16b, vctr.16b
+ST5(	mov		v4.16b, vctr.16b		)
+	.if \xctr
+		sub		x6, CTR, #MAX_STRIDE - 1
+		sub		x7, CTR, #MAX_STRIDE - 2
+		sub		x8, CTR, #MAX_STRIDE - 3
+		sub		x9, CTR, #MAX_STRIDE - 4
+ST5(		sub		x10, CTR, #MAX_STRIDE - 5	)
+		eor		x6, x6, IV_PART
+		eor		x7, x7, IV_PART
+		eor		x8, x8, IV_PART
+		eor		x9, x9, IV_PART
+ST5(		eor		x10, x10, IV_PART		)
+		mov		v0.d[0], x6
+		mov		v1.d[0], x7
+		mov		v2.d[0], x8
+		mov		v3.d[0], x9
+ST5(		mov		v4.d[0], x10			)
+	.else
+		bcs		0f
+		.subsection	1
+		/*
+		 * This subsection handles carries.
+		 *
+		 * Conditional branching here is allowed with respect to time
+		 * invariance since the branches are dependent on the IV instead
+		 * of the plaintext or key.  This code is rarely executed in
+		 * practice anyway.
+		 */
+
+		/* Apply carry to outgoing counter. */
+0:		umov		x8, vctr.d[0]
+		rev		x8, x8
+		add		x8, x8, #1
+		rev		x8, x8
+		ins		vctr.d[0], x8
+
+		/*
+		 * Apply carry to counter blocks if needed.
+		 *
+		 * Since the carry flag was set, we know 0 <= IV_PART <
+		 * MAX_STRIDE.  Using the value of IV_PART we can determine how
+		 * many counter blocks need to be updated.
+		 */
+		cbz		IV_PART, 2f
+		adr		x16, 1f
+		sub		x16, x16, IV_PART, lsl #3
+		br		x16
+		bti		c
+		mov		v0.d[0], vctr.d[0]
+		bti		c
+		mov		v1.d[0], vctr.d[0]
+		bti		c
+		mov		v2.d[0], vctr.d[0]
+		bti		c
+		mov		v3.d[0], vctr.d[0]
+ST5(		bti		c				)
+ST5(		mov		v4.d[0], vctr.d[0]		)
+1:		b		2f
+		.previous
+
+2:		rev		x7, IV_PART
+		ins		vctr.d[1], x7
+		sub		x7, IV_PART, #MAX_STRIDE - 1
+		sub		x8, IV_PART, #MAX_STRIDE - 2
+		sub		x9, IV_PART, #MAX_STRIDE - 3
+		rev		x7, x7
+		rev		x8, x8
+		mov		v1.d[1], x7
+		rev		x9, x9
+ST5(		sub		x10, IV_PART, #MAX_STRIDE - 4	)
+		mov		v2.d[1], x8
+ST5(		rev		x10, x10			)
+		mov		v3.d[1], x9
+ST5(		mov		v4.d[1], x10			)
+	.endif
+
+	/*
+	 * If there are at least MAX_STRIDE blocks left, XOR the data with
+	 * keystream and store.  Otherwise jump to tail handling.
+	 */
+	tbnz		BYTES_W, #31, .Lctrtail\xctr
+	ld1		{v5.16b-v7.16b}, [IN], #48
+ST4(	bl		aes_encrypt_block4x		)
+ST5(	bl		aes_encrypt_block5x		)
+	eor		v0.16b, v5.16b, v0.16b
+ST4(	ld1		{v5.16b}, [IN], #16		)
+	eor		v1.16b, v6.16b, v1.16b
+ST5(	ld1		{v5.16b-v6.16b}, [IN], #32	)
+	eor		v2.16b, v7.16b, v2.16b
+	eor		v3.16b, v5.16b, v3.16b
+ST5(	eor		v4.16b, v6.16b, v4.16b		)
+	st1		{v0.16b-v3.16b}, [OUT], #64
+ST5(	st1		{v4.16b}, [OUT], #16		)
+	cbz		BYTES_W, .Lctrout\xctr
+	b		.LctrloopNx\xctr
+
+.Lctrout\xctr:
+	.if !\xctr
+		st1		{vctr.16b}, [IV] /* return next CTR value */
+	.endif
+	frame_pop
+	ret
+
+.Lctrtail\xctr:
+	/*
+	 * Handle up to MAX_STRIDE * 16 - 1 bytes of plaintext
+	 *
+	 * This code expects the last keystream block to be in v{MAX_STRIDE-1}.
+	 * For example: if encrypting two blocks with MAX_STRIDE=5, then v3 and
+	 * v4 should have the next two counter blocks.
+	 *
+	 * This allows us to store the ciphertext by writing to overlapping
+	 * regions of memory.  Any invalid ciphertext blocks get overwritten by
+	 * correctly computed blocks.  This approach greatly simplifies the
+	 * logic for storing the ciphertext.
+	 */
+	mov		x16, #16
+	ands		w7, BYTES_W, #0xf
+	csel		x13, x7, x16, ne
+
+ST5(	cmp		BYTES_W, #64 - (MAX_STRIDE << 4))
+ST5(	csel		x14, x16, xzr, gt		)
+	cmp		BYTES_W, #48 - (MAX_STRIDE << 4)
+	csel		x15, x16, xzr, gt
+	cmp		BYTES_W, #32 - (MAX_STRIDE << 4)
+	csel		x16, x16, xzr, gt
+	cmp		BYTES_W, #16 - (MAX_STRIDE << 4)
+
+	adr_l		x9, .Lcts_permute_table
+	add		x9, x9, x13
+	ble		.Lctrtail1x\xctr
+
+ST5(	ld1		{v5.16b}, [IN], x14		)
+	ld1		{v6.16b}, [IN], x15
+	ld1		{v7.16b}, [IN], x16
+
+ST4(	bl		aes_encrypt_block4x		)
+ST5(	bl		aes_encrypt_block5x		)
+
+	ld1		{v8.16b}, [IN], x13
+	ld1		{v9.16b}, [IN]
+	ld1		{v10.16b}, [x9]
+
+ST4(	eor		v6.16b, v6.16b, v0.16b		)
+ST4(	eor		v7.16b, v7.16b, v1.16b		)
+ST4(	tbl		v3.16b, {v3.16b}, v10.16b	)
+ST4(	eor		v8.16b, v8.16b, v2.16b		)
+ST4(	eor		v9.16b, v9.16b, v3.16b		)
+
+ST5(	eor		v5.16b, v5.16b, v0.16b		)
+ST5(	eor		v6.16b, v6.16b, v1.16b		)
+ST5(	tbl		v4.16b, {v4.16b}, v10.16b	)
+ST5(	eor		v7.16b, v7.16b, v2.16b		)
+ST5(	eor		v8.16b, v8.16b, v3.16b		)
+ST5(	eor		v9.16b, v9.16b, v4.16b		)
+
+ST5(	st1		{v5.16b}, [OUT], x14		)
+	st1		{v6.16b}, [OUT], x15
+	st1		{v7.16b}, [OUT], x16
+	add		x13, x13, OUT
+	st1		{v9.16b}, [x13]		// overlapping stores
+	st1		{v8.16b}, [OUT]
+	b		.Lctrout\xctr
+
+.Lctrtail1x\xctr:
+	/*
+	 * Handle <= 16 bytes of plaintext
+	 *
+	 * This code always reads and writes 16 bytes.  To avoid out of bounds
+	 * accesses, XCTR and CTR modes must use a temporary buffer when
+	 * encrypting/decrypting less than 16 bytes.
+	 *
+	 * This code is unusual in that it loads the input and stores the output
+	 * relative to the end of the buffers rather than relative to the start.
+	 * This causes unusual behaviour when encrypting/decrypting less than 16
+	 * bytes; the end of the data is expected to be at the end of the
+	 * temporary buffer rather than the start of the data being at the start
+	 * of the temporary buffer.
+	 */
+	sub		x8, x7, #16
+	csel		x7, x7, x8, eq
+	add		IN, IN, x7
+	add		OUT, OUT, x7
+	ld1		{v5.16b}, [IN]
+	ld1		{v6.16b}, [OUT]
+ST5(	mov		v3.16b, v4.16b			)
+	encrypt_block	v3, ROUNDS_W, KEY, x8, w7
+	ld1		{v10.16b-v11.16b}, [x9]
+	tbl		v3.16b, {v3.16b}, v10.16b
+	sshr		v11.16b, v11.16b, #7
+	eor		v5.16b, v5.16b, v3.16b
+	bif		v5.16b, v6.16b, v11.16b
+	st1		{v5.16b}, [OUT]
+	b		.Lctrout\xctr
+
+	// Arguments
+	.unreq OUT
+	.unreq IN
+	.unreq KEY
+	.unreq ROUNDS_W
+	.unreq BYTES_W
+	.unreq IV
+	.unreq BYTE_CTR_W	// XCTR only
+	// Intermediate values
+	.unreq CTR_W		// XCTR only
+	.unreq CTR		// XCTR only
+	.unreq IV_PART
+	.unreq BLOCKS
+	.unreq BLOCKS_W
+.endm
+
+	/*
+	 * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		   int bytes, u8 ctr[])
+	 *
+	 * The input and output buffers must always be at least 16 bytes even if
+	 * encrypting/decrypting less than 16 bytes.  Otherwise out of bounds
+	 * accesses will occur.  The data to be encrypted/decrypted is expected
+	 * to be at the end of this 16-byte temporary buffer rather than the
+	 * start.
+	 */
+
+AES_FUNC_START(aes_ctr_encrypt)
+	ctr_encrypt 0
+AES_FUNC_END(aes_ctr_encrypt)
+
+	/*
+	 * aes_xctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		   int bytes, u8 const iv[], int byte_ctr)
+	 *
+	 * The input and output buffers must always be at least 16 bytes even if
+	 * encrypting/decrypting less than 16 bytes.  Otherwise out of bounds
+	 * accesses will occur.  The data to be encrypted/decrypted is expected
+	 * to be at the end of this 16-byte temporary buffer rather than the
+	 * start.
+	 */
+
+AES_FUNC_START(aes_xctr_encrypt)
+	ctr_encrypt 1
+AES_FUNC_END(aes_xctr_encrypt)
+
+
+	/*
+	 * aes_xts_encrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds,
+	 *		   int bytes, u8 const rk2[], u8 iv[], int first)
+	 * aes_xts_decrypt(u8 out[], u8 const in[], u8 const rk1[], int rounds,
+	 *		   int bytes, u8 const rk2[], u8 iv[], int first)
+	 */
+
+	.macro		next_tweak, out, in, tmp
+	sshr		\tmp\().2d,  \in\().2d,   #63
+	and		\tmp\().16b, \tmp\().16b, xtsmask.16b
+	add		\out\().2d,  \in\().2d,   \in\().2d
+	ext		\tmp\().16b, \tmp\().16b, \tmp\().16b, #8
+	eor		\out\().16b, \out\().16b, \tmp\().16b
+	.endm
+
+	.macro		xts_load_mask, tmp
+	movi		xtsmask.2s, #0x1
+	movi		\tmp\().2s, #0x87
+	uzp1		xtsmask.4s, xtsmask.4s, \tmp\().4s
+	.endm
+
+AES_FUNC_START(aes_xts_encrypt)
+	frame_push	0
+
+	ld1		{v4.16b}, [x6]
+	xts_load_mask	v8
+	cbz		w7, .Lxtsencnotfirst
+
+	enc_prepare	w3, x5, x8
+	xts_cts_skip_tw	w7, .LxtsencNx
+	encrypt_block	v4, w3, x5, x8, w7		/* first tweak */
+	enc_switch_key	w3, x2, x8
+	b		.LxtsencNx
+
+.Lxtsencnotfirst:
+	enc_prepare	w3, x2, x8
+.LxtsencloopNx:
+	next_tweak	v4, v4, v8
+.LxtsencNx:
+	subs		w4, w4, #64
+	bmi		.Lxtsenc1x
+	ld1		{v0.16b-v3.16b}, [x1], #64	/* get 4 pt blocks */
+	next_tweak	v5, v4, v8
+	eor		v0.16b, v0.16b, v4.16b
+	next_tweak	v6, v5, v8
+	eor		v1.16b, v1.16b, v5.16b
+	eor		v2.16b, v2.16b, v6.16b
+	next_tweak	v7, v6, v8
+	eor		v3.16b, v3.16b, v7.16b
+	bl		aes_encrypt_block4x
+	eor		v3.16b, v3.16b, v7.16b
+	eor		v0.16b, v0.16b, v4.16b
+	eor		v1.16b, v1.16b, v5.16b
+	eor		v2.16b, v2.16b, v6.16b
+	st1		{v0.16b-v3.16b}, [x0], #64
+	mov		v4.16b, v7.16b
+	cbz		w4, .Lxtsencret
+	xts_reload_mask	v8
+	b		.LxtsencloopNx
+.Lxtsenc1x:
+	adds		w4, w4, #64
+	beq		.Lxtsencout
+	subs		w4, w4, #16
+	bmi		.LxtsencctsNx
+.Lxtsencloop:
+	ld1		{v0.16b}, [x1], #16
+.Lxtsencctsout:
+	eor		v0.16b, v0.16b, v4.16b
+	encrypt_block	v0, w3, x2, x8, w7
+	eor		v0.16b, v0.16b, v4.16b
+	cbz		w4, .Lxtsencout
+	subs		w4, w4, #16
+	next_tweak	v4, v4, v8
+	bmi		.Lxtsenccts
+	st1		{v0.16b}, [x0], #16
+	b		.Lxtsencloop
+.Lxtsencout:
+	st1		{v0.16b}, [x0]
+.Lxtsencret:
+	st1		{v4.16b}, [x6]
+	frame_pop
+	ret
+
+.LxtsencctsNx:
+	mov		v0.16b, v3.16b
+	sub		x0, x0, #16
+.Lxtsenccts:
+	adr_l		x8, .Lcts_permute_table
+
+	add		x1, x1, w4, sxtw	/* rewind input pointer */
+	add		w4, w4, #16		/* # bytes in final block */
+	add		x9, x8, #32
+	add		x8, x8, x4
+	sub		x9, x9, x4
+	add		x4, x0, x4		/* output address of final block */
+
+	ld1		{v1.16b}, [x1]		/* load final block */
+	ld1		{v2.16b}, [x8]
+	ld1		{v3.16b}, [x9]
+
+	tbl		v2.16b, {v0.16b}, v2.16b
+	tbx		v0.16b, {v1.16b}, v3.16b
+	st1		{v2.16b}, [x4]			/* overlapping stores */
+	mov		w4, wzr
+	b		.Lxtsencctsout
+AES_FUNC_END(aes_xts_encrypt)
+
+AES_FUNC_START(aes_xts_decrypt)
+	frame_push	0
+
+	/* subtract 16 bytes if we are doing CTS */
+	sub		w8, w4, #0x10
+	tst		w4, #0xf
+	csel		w4, w4, w8, eq
+
+	ld1		{v4.16b}, [x6]
+	xts_load_mask	v8
+	xts_cts_skip_tw	w7, .Lxtsdecskiptw
+	cbz		w7, .Lxtsdecnotfirst
+
+	enc_prepare	w3, x5, x8
+	encrypt_block	v4, w3, x5, x8, w7		/* first tweak */
+.Lxtsdecskiptw:
+	dec_prepare	w3, x2, x8
+	b		.LxtsdecNx
+
+.Lxtsdecnotfirst:
+	dec_prepare	w3, x2, x8
+.LxtsdecloopNx:
+	next_tweak	v4, v4, v8
+.LxtsdecNx:
+	subs		w4, w4, #64
+	bmi		.Lxtsdec1x
+	ld1		{v0.16b-v3.16b}, [x1], #64	/* get 4 ct blocks */
+	next_tweak	v5, v4, v8
+	eor		v0.16b, v0.16b, v4.16b
+	next_tweak	v6, v5, v8
+	eor		v1.16b, v1.16b, v5.16b
+	eor		v2.16b, v2.16b, v6.16b
+	next_tweak	v7, v6, v8
+	eor		v3.16b, v3.16b, v7.16b
+	bl		aes_decrypt_block4x
+	eor		v3.16b, v3.16b, v7.16b
+	eor		v0.16b, v0.16b, v4.16b
+	eor		v1.16b, v1.16b, v5.16b
+	eor		v2.16b, v2.16b, v6.16b
+	st1		{v0.16b-v3.16b}, [x0], #64
+	mov		v4.16b, v7.16b
+	cbz		w4, .Lxtsdecout
+	xts_reload_mask	v8
+	b		.LxtsdecloopNx
+.Lxtsdec1x:
+	adds		w4, w4, #64
+	beq		.Lxtsdecout
+	subs		w4, w4, #16
+.Lxtsdecloop:
+	ld1		{v0.16b}, [x1], #16
+	bmi		.Lxtsdeccts
+.Lxtsdecctsout:
+	eor		v0.16b, v0.16b, v4.16b
+	decrypt_block	v0, w3, x2, x8, w7
+	eor		v0.16b, v0.16b, v4.16b
+	st1		{v0.16b}, [x0], #16
+	cbz		w4, .Lxtsdecout
+	subs		w4, w4, #16
+	next_tweak	v4, v4, v8
+	b		.Lxtsdecloop
+.Lxtsdecout:
+	st1		{v4.16b}, [x6]
+	frame_pop
+	ret
+
+.Lxtsdeccts:
+	adr_l		x8, .Lcts_permute_table
+
+	add		x1, x1, w4, sxtw	/* rewind input pointer */
+	add		w4, w4, #16		/* # bytes in final block */
+	add		x9, x8, #32
+	add		x8, x8, x4
+	sub		x9, x9, x4
+	add		x4, x0, x4		/* output address of final block */
+
+	next_tweak	v5, v4, v8
+
+	ld1		{v1.16b}, [x1]		/* load final block */
+	ld1		{v2.16b}, [x8]
+	ld1		{v3.16b}, [x9]
+
+	eor		v0.16b, v0.16b, v5.16b
+	decrypt_block	v0, w3, x2, x8, w7
+	eor		v0.16b, v0.16b, v5.16b
+
+	tbl		v2.16b, {v0.16b}, v2.16b
+	tbx		v0.16b, {v1.16b}, v3.16b
+
+	st1		{v2.16b}, [x4]			/* overlapping stores */
+	mov		w4, wzr
+	b		.Lxtsdecctsout
+AES_FUNC_END(aes_xts_decrypt)
+
+	/*
+	 * aes_mac_update(u8 const in[], u32 const rk[], int rounds,
+	 *		  int blocks, u8 dg[], int enc_before, int enc_after)
+	 */
+AES_FUNC_START(aes_mac_update)
+	ld1		{v0.16b}, [x4]			/* get dg */
+	enc_prepare	w2, x1, x7
+	cbz		w5, .Lmacloop4x
+
+	encrypt_block	v0, w2, x1, x7, w8
+
+.Lmacloop4x:
+	subs		w3, w3, #4
+	bmi		.Lmac1x
+	ld1		{v1.16b-v4.16b}, [x0], #64	/* get next pt block */
+	eor		v0.16b, v0.16b, v1.16b		/* ..and xor with dg */
+	encrypt_block	v0, w2, x1, x7, w8
+	eor		v0.16b, v0.16b, v2.16b
+	encrypt_block	v0, w2, x1, x7, w8
+	eor		v0.16b, v0.16b, v3.16b
+	encrypt_block	v0, w2, x1, x7, w8
+	eor		v0.16b, v0.16b, v4.16b
+	cmp		w3, wzr
+	csinv		x5, x6, xzr, eq
+	cbz		w5, .Lmacout
+	encrypt_block	v0, w2, x1, x7, w8
+	st1		{v0.16b}, [x4]			/* return dg */
+	cond_yield	.Lmacout, x7, x8
+	b		.Lmacloop4x
+.Lmac1x:
+	add		w3, w3, #4
+.Lmacloop:
+	cbz		w3, .Lmacout
+	ld1		{v1.16b}, [x0], #16		/* get next pt block */
+	eor		v0.16b, v0.16b, v1.16b		/* ..and xor with dg */
+
+	subs		w3, w3, #1
+	csinv		x5, x6, xzr, eq
+	cbz		w5, .Lmacout
+
+.Lmacenc:
+	encrypt_block	v0, w2, x1, x7, w8
+	b		.Lmacloop
+
+.Lmacout:
+	st1		{v0.16b}, [x4]			/* return dg */
+	mov		w0, w3
+	ret
+AES_FUNC_END(aes_mac_update)
diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S
new file mode 100644
index 000000000..9de7fbc79
--- /dev/null
+++ b/arch/arm64/crypto/aes-neon.S
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/arch/arm64/crypto/aes-neon.S - AES cipher for ARMv8 NEON
+ *
+ * Copyright (C) 2013 - 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define AES_FUNC_START(func)		SYM_FUNC_START(neon_ ## func)
+#define AES_FUNC_END(func)		SYM_FUNC_END(neon_ ## func)
+
+	xtsmask		.req	v7
+	cbciv		.req	v7
+	vctr		.req	v4
+
+	.macro		xts_reload_mask, tmp
+	xts_load_mask	\tmp
+	.endm
+
+	/* special case for the neon-bs driver calling into this one for CTS */
+	.macro		xts_cts_skip_tw, reg, lbl
+	tbnz		\reg, #1, \lbl
+	.endm
+
+	/* multiply by polynomial 'x' in GF(2^8) */
+	.macro		mul_by_x, out, in, temp, const
+	sshr		\temp, \in, #7
+	shl		\out, \in, #1
+	and		\temp, \temp, \const
+	eor		\out, \out, \temp
+	.endm
+
+	/* multiply by polynomial 'x^2' in GF(2^8) */
+	.macro		mul_by_x2, out, in, temp, const
+	ushr		\temp, \in, #6
+	shl		\out, \in, #2
+	pmul		\temp, \temp, \const
+	eor		\out, \out, \temp
+	.endm
+
+	/* preload the entire Sbox */
+	.macro		prepare, sbox, shiftrows, temp
+	movi		v12.16b, #0x1b
+	ldr_l		q13, \shiftrows, \temp
+	ldr_l		q14, .Lror32by8, \temp
+	adr_l		\temp, \sbox
+	ld1		{v16.16b-v19.16b}, [\temp], #64
+	ld1		{v20.16b-v23.16b}, [\temp], #64
+	ld1		{v24.16b-v27.16b}, [\temp], #64
+	ld1		{v28.16b-v31.16b}, [\temp]
+	.endm
+
+	/* do preload for encryption */
+	.macro		enc_prepare, ignore0, ignore1, temp
+	prepare		crypto_aes_sbox, .LForward_ShiftRows, \temp
+	.endm
+
+	.macro		enc_switch_key, ignore0, ignore1, temp
+	/* do nothing */
+	.endm
+
+	/* do preload for decryption */
+	.macro		dec_prepare, ignore0, ignore1, temp
+	prepare		crypto_aes_inv_sbox, .LReverse_ShiftRows, \temp
+	.endm
+
+	/* apply SubBytes transformation using the preloaded Sbox */
+	.macro		sub_bytes, in
+	sub		v9.16b, \in\().16b, v15.16b
+	tbl		\in\().16b, {v16.16b-v19.16b}, \in\().16b
+	sub		v10.16b, v9.16b, v15.16b
+	tbx		\in\().16b, {v20.16b-v23.16b}, v9.16b
+	sub		v11.16b, v10.16b, v15.16b
+	tbx		\in\().16b, {v24.16b-v27.16b}, v10.16b
+	tbx		\in\().16b, {v28.16b-v31.16b}, v11.16b
+	.endm
+
+	/* apply MixColumns transformation */
+	.macro		mix_columns, in, enc
+	.if		\enc == 0
+	/* Inverse MixColumns: pre-multiply by { 5, 0, 4, 0 } */
+	mul_by_x2	v8.16b, \in\().16b, v9.16b, v12.16b
+	eor		\in\().16b, \in\().16b, v8.16b
+	rev32		v8.8h, v8.8h
+	eor		\in\().16b, \in\().16b, v8.16b
+	.endif
+
+	mul_by_x	v9.16b, \in\().16b, v8.16b, v12.16b
+	rev32		v8.8h, \in\().8h
+	eor		v8.16b, v8.16b, v9.16b
+	eor		\in\().16b, \in\().16b, v8.16b
+	tbl		\in\().16b, {\in\().16b}, v14.16b
+	eor		\in\().16b, \in\().16b, v8.16b
+	.endm
+
+	.macro		do_block, enc, in, rounds, rk, rkp, i
+	ld1		{v15.4s}, [\rk]
+	add		\rkp, \rk, #16
+	mov		\i, \rounds
+1111:	eor		\in\().16b, \in\().16b, v15.16b		/* ^round key */
+	movi		v15.16b, #0x40
+	tbl		\in\().16b, {\in\().16b}, v13.16b	/* ShiftRows */
+	sub_bytes	\in
+	subs		\i, \i, #1
+	ld1		{v15.4s}, [\rkp], #16
+	beq		2222f
+	mix_columns	\in, \enc
+	b		1111b
+2222:	eor		\in\().16b, \in\().16b, v15.16b		/* ^round key */
+	.endm
+
+	.macro		encrypt_block, in, rounds, rk, rkp, i
+	do_block	1, \in, \rounds, \rk, \rkp, \i
+	.endm
+
+	.macro		decrypt_block, in, rounds, rk, rkp, i
+	do_block	0, \in, \rounds, \rk, \rkp, \i
+	.endm
+
+	/*
+	 * Interleaved versions: functionally equivalent to the
+	 * ones above, but applied to AES states in parallel.
+	 */
+
+	.macro		sub_bytes_4x, in0, in1, in2, in3
+	sub		v8.16b, \in0\().16b, v15.16b
+	tbl		\in0\().16b, {v16.16b-v19.16b}, \in0\().16b
+	sub		v9.16b, \in1\().16b, v15.16b
+	tbl		\in1\().16b, {v16.16b-v19.16b}, \in1\().16b
+	sub		v10.16b, \in2\().16b, v15.16b
+	tbl		\in2\().16b, {v16.16b-v19.16b}, \in2\().16b
+	sub		v11.16b, \in3\().16b, v15.16b
+	tbl		\in3\().16b, {v16.16b-v19.16b}, \in3\().16b
+	tbx		\in0\().16b, {v20.16b-v23.16b}, v8.16b
+	tbx		\in1\().16b, {v20.16b-v23.16b}, v9.16b
+	sub		v8.16b, v8.16b, v15.16b
+	tbx		\in2\().16b, {v20.16b-v23.16b}, v10.16b
+	sub		v9.16b, v9.16b, v15.16b
+	tbx		\in3\().16b, {v20.16b-v23.16b}, v11.16b
+	sub		v10.16b, v10.16b, v15.16b
+	tbx		\in0\().16b, {v24.16b-v27.16b}, v8.16b
+	sub		v11.16b, v11.16b, v15.16b
+	tbx		\in1\().16b, {v24.16b-v27.16b}, v9.16b
+	sub		v8.16b, v8.16b, v15.16b
+	tbx		\in2\().16b, {v24.16b-v27.16b}, v10.16b
+	sub		v9.16b, v9.16b, v15.16b
+	tbx		\in3\().16b, {v24.16b-v27.16b}, v11.16b
+	sub		v10.16b, v10.16b, v15.16b
+	tbx		\in0\().16b, {v28.16b-v31.16b}, v8.16b
+	sub		v11.16b, v11.16b, v15.16b
+	tbx		\in1\().16b, {v28.16b-v31.16b}, v9.16b
+	tbx		\in2\().16b, {v28.16b-v31.16b}, v10.16b
+	tbx		\in3\().16b, {v28.16b-v31.16b}, v11.16b
+	.endm
+
+	.macro		mul_by_x_2x, out0, out1, in0, in1, tmp0, tmp1, const
+	sshr		\tmp0\().16b, \in0\().16b, #7
+	shl		\out0\().16b, \in0\().16b, #1
+	sshr		\tmp1\().16b, \in1\().16b, #7
+	and		\tmp0\().16b, \tmp0\().16b, \const\().16b
+	shl		\out1\().16b, \in1\().16b, #1
+	and		\tmp1\().16b, \tmp1\().16b, \const\().16b
+	eor		\out0\().16b, \out0\().16b, \tmp0\().16b
+	eor		\out1\().16b, \out1\().16b, \tmp1\().16b
+	.endm
+
+	.macro		mul_by_x2_2x, out0, out1, in0, in1, tmp0, tmp1, const
+	ushr		\tmp0\().16b, \in0\().16b, #6
+	shl		\out0\().16b, \in0\().16b, #2
+	ushr		\tmp1\().16b, \in1\().16b, #6
+	pmul		\tmp0\().16b, \tmp0\().16b, \const\().16b
+	shl		\out1\().16b, \in1\().16b, #2
+	pmul		\tmp1\().16b, \tmp1\().16b, \const\().16b
+	eor		\out0\().16b, \out0\().16b, \tmp0\().16b
+	eor		\out1\().16b, \out1\().16b, \tmp1\().16b
+	.endm
+
+	.macro		mix_columns_2x, in0, in1, enc
+	.if		\enc == 0
+	/* Inverse MixColumns: pre-multiply by { 5, 0, 4, 0 } */
+	mul_by_x2_2x	v8, v9, \in0, \in1, v10, v11, v12
+	eor		\in0\().16b, \in0\().16b, v8.16b
+	rev32		v8.8h, v8.8h
+	eor		\in1\().16b, \in1\().16b, v9.16b
+	rev32		v9.8h, v9.8h
+	eor		\in0\().16b, \in0\().16b, v8.16b
+	eor		\in1\().16b, \in1\().16b, v9.16b
+	.endif
+
+	mul_by_x_2x	v8, v9, \in0, \in1, v10, v11, v12
+	rev32		v10.8h, \in0\().8h
+	rev32		v11.8h, \in1\().8h
+	eor		v10.16b, v10.16b, v8.16b
+	eor		v11.16b, v11.16b, v9.16b
+	eor		\in0\().16b, \in0\().16b, v10.16b
+	eor		\in1\().16b, \in1\().16b, v11.16b
+	tbl		\in0\().16b, {\in0\().16b}, v14.16b
+	tbl		\in1\().16b, {\in1\().16b}, v14.16b
+	eor		\in0\().16b, \in0\().16b, v10.16b
+	eor		\in1\().16b, \in1\().16b, v11.16b
+	.endm
+
+	.macro		do_block_4x, enc, in0, in1, in2, in3, rounds, rk, rkp, i
+	ld1		{v15.4s}, [\rk]
+	add		\rkp, \rk, #16
+	mov		\i, \rounds
+1111:	eor		\in0\().16b, \in0\().16b, v15.16b	/* ^round key */
+	eor		\in1\().16b, \in1\().16b, v15.16b	/* ^round key */
+	eor		\in2\().16b, \in2\().16b, v15.16b	/* ^round key */
+	eor		\in3\().16b, \in3\().16b, v15.16b	/* ^round key */
+	movi		v15.16b, #0x40
+	tbl		\in0\().16b, {\in0\().16b}, v13.16b	/* ShiftRows */
+	tbl		\in1\().16b, {\in1\().16b}, v13.16b	/* ShiftRows */
+	tbl		\in2\().16b, {\in2\().16b}, v13.16b	/* ShiftRows */
+	tbl		\in3\().16b, {\in3\().16b}, v13.16b	/* ShiftRows */
+	sub_bytes_4x	\in0, \in1, \in2, \in3
+	subs		\i, \i, #1
+	ld1		{v15.4s}, [\rkp], #16
+	beq		2222f
+	mix_columns_2x	\in0, \in1, \enc
+	mix_columns_2x	\in2, \in3, \enc
+	b		1111b
+2222:	eor		\in0\().16b, \in0\().16b, v15.16b	/* ^round key */
+	eor		\in1\().16b, \in1\().16b, v15.16b	/* ^round key */
+	eor		\in2\().16b, \in2\().16b, v15.16b	/* ^round key */
+	eor		\in3\().16b, \in3\().16b, v15.16b	/* ^round key */
+	.endm
+
+	.macro		encrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i
+	do_block_4x	1, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i
+	.endm
+
+	.macro		decrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i
+	do_block_4x	0, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i
+	.endm
+
+#include "aes-modes.S"
+
+	.section	".rodata", "a"
+	.align		4
+.LForward_ShiftRows:
+	.octa		0x0b06010c07020d08030e09040f0a0500
+
+.LReverse_ShiftRows:
+	.octa		0x0306090c0f0205080b0e0104070a0d00
+
+.Lror32by8:
+	.octa		0x0c0f0e0d080b0a090407060500030201
diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S
new file mode 100644
index 000000000..baf450717
--- /dev/null
+++ b/arch/arm64/crypto/aes-neonbs-core.S
@@ -0,0 +1,866 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Bit sliced AES using NEON instructions
+ *
+ * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+/*
+ * The algorithm implemented here is described in detail by the paper
+ * 'Faster and Timing-Attack Resistant AES-GCM' by Emilia Kaesper and
+ * Peter Schwabe (https://eprint.iacr.org/2009/129.pdf)
+ *
+ * This implementation is based primarily on the OpenSSL implementation
+ * for 32-bit ARM written by Andy Polyakov <appro@openssl.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+
+	.text
+
+	rounds		.req	x11
+	bskey		.req	x12
+
+	.macro		in_bs_ch, b0, b1, b2, b3, b4, b5, b6, b7
+	eor		\b2, \b2, \b1
+	eor		\b5, \b5, \b6
+	eor		\b3, \b3, \b0
+	eor		\b6, \b6, \b2
+	eor		\b5, \b5, \b0
+	eor		\b6, \b6, \b3
+	eor		\b3, \b3, \b7
+	eor		\b7, \b7, \b5
+	eor		\b3, \b3, \b4
+	eor		\b4, \b4, \b5
+	eor		\b2, \b2, \b7
+	eor		\b3, \b3, \b1
+	eor		\b1, \b1, \b5
+	.endm
+
+	.macro		out_bs_ch, b0, b1, b2, b3, b4, b5, b6, b7
+	eor		\b0, \b0, \b6
+	eor		\b1, \b1, \b4
+	eor		\b4, \b4, \b6
+	eor		\b2, \b2, \b0
+	eor		\b6, \b6, \b1
+	eor		\b1, \b1, \b5
+	eor		\b5, \b5, \b3
+	eor		\b3, \b3, \b7
+	eor		\b7, \b7, \b5
+	eor		\b2, \b2, \b5
+	eor		\b4, \b4, \b7
+	.endm
+
+	.macro		inv_in_bs_ch, b6, b1, b2, b4, b7, b0, b3, b5
+	eor		\b1, \b1, \b7
+	eor		\b4, \b4, \b7
+	eor		\b7, \b7, \b5
+	eor		\b1, \b1, \b3
+	eor		\b2, \b2, \b5
+	eor		\b3, \b3, \b7
+	eor		\b6, \b6, \b1
+	eor		\b2, \b2, \b0
+	eor		\b5, \b5, \b3
+	eor		\b4, \b4, \b6
+	eor		\b0, \b0, \b6
+	eor		\b1, \b1, \b4
+	.endm
+
+	.macro		inv_out_bs_ch, b6, b5, b0, b3, b7, b1, b4, b2
+	eor		\b1, \b1, \b5
+	eor		\b2, \b2, \b7
+	eor		\b3, \b3, \b1
+	eor		\b4, \b4, \b5
+	eor		\b7, \b7, \b5
+	eor		\b3, \b3, \b4
+	eor 		\b5, \b5, \b0
+	eor		\b3, \b3, \b7
+	eor		\b6, \b6, \b2
+	eor		\b2, \b2, \b1
+	eor		\b6, \b6, \b3
+	eor		\b3, \b3, \b0
+	eor		\b5, \b5, \b6
+	.endm
+
+	.macro		mul_gf4, x0, x1, y0, y1, t0, t1
+	eor 		\t0, \y0, \y1
+	and		\t0, \t0, \x0
+	eor		\x0, \x0, \x1
+	and		\t1, \x1, \y0
+	and		\x0, \x0, \y1
+	eor		\x1, \t1, \t0
+	eor		\x0, \x0, \t1
+	.endm
+
+	.macro		mul_gf4_n_gf4, x0, x1, y0, y1, t0, x2, x3, y2, y3, t1
+	eor		\t0, \y0, \y1
+	eor 		\t1, \y2, \y3
+	and		\t0, \t0, \x0
+	and		\t1, \t1, \x2
+	eor		\x0, \x0, \x1
+	eor		\x2, \x2, \x3
+	and		\x1, \x1, \y0
+	and		\x3, \x3, \y2
+	and		\x0, \x0, \y1
+	and		\x2, \x2, \y3
+	eor		\x1, \x1, \x0
+	eor		\x2, \x2, \x3
+	eor		\x0, \x0, \t0
+	eor		\x3, \x3, \t1
+	.endm
+
+	.macro		mul_gf16_2, x0, x1, x2, x3, x4, x5, x6, x7, \
+				    y0, y1, y2, y3, t0, t1, t2, t3
+	eor		\t0, \x0, \x2
+	eor		\t1, \x1, \x3
+	mul_gf4  	\x0, \x1, \y0, \y1, \t2, \t3
+	eor		\y0, \y0, \y2
+	eor		\y1, \y1, \y3
+	mul_gf4_n_gf4	\t0, \t1, \y0, \y1, \t3, \x2, \x3, \y2, \y3, \t2
+	eor		\x0, \x0, \t0
+	eor		\x2, \x2, \t0
+	eor		\x1, \x1, \t1
+	eor		\x3, \x3, \t1
+	eor		\t0, \x4, \x6
+	eor		\t1, \x5, \x7
+	mul_gf4_n_gf4	\t0, \t1, \y0, \y1, \t3, \x6, \x7, \y2, \y3, \t2
+	eor		\y0, \y0, \y2
+	eor		\y1, \y1, \y3
+	mul_gf4  	\x4, \x5, \y0, \y1, \t2, \t3
+	eor		\x4, \x4, \t0
+	eor		\x6, \x6, \t0
+	eor		\x5, \x5, \t1
+	eor		\x7, \x7, \t1
+	.endm
+
+	.macro		inv_gf256, x0, x1, x2, x3, x4, x5, x6, x7, \
+				   t0, t1, t2, t3, s0, s1, s2, s3
+	eor		\t3, \x4, \x6
+	eor		\t0, \x5, \x7
+	eor		\t1, \x1, \x3
+	eor		\s1, \x7, \x6
+	eor		\s0, \x0, \x2
+	eor		\s3, \t3, \t0
+	orr		\t2, \t0, \t1
+	and		\s2, \t3, \s0
+	orr		\t3, \t3, \s0
+	eor		\s0, \s0, \t1
+	and		\t0, \t0, \t1
+	eor		\t1, \x3, \x2
+	and		\s3, \s3, \s0
+	and		\s1, \s1, \t1
+	eor		\t1, \x4, \x5
+	eor		\s0, \x1, \x0
+	eor		\t3, \t3, \s1
+	eor		\t2, \t2, \s1
+	and		\s1, \t1, \s0
+	orr		\t1, \t1, \s0
+	eor		\t3, \t3, \s3
+	eor		\t0, \t0, \s1
+	eor		\t2, \t2, \s2
+	eor		\t1, \t1, \s3
+	eor		\t0, \t0, \s2
+	and		\s0, \x7, \x3
+	eor		\t1, \t1, \s2
+	and		\s1, \x6, \x2
+	and		\s2, \x5, \x1
+	orr		\s3, \x4, \x0
+	eor		\t3, \t3, \s0
+	eor		\t1, \t1, \s2
+	eor		\s0, \t0, \s3
+	eor		\t2, \t2, \s1
+	and		\s2, \t3, \t1
+	eor		\s1, \t2, \s2
+	eor		\s3, \s0, \s2
+	bsl		\s1, \t1, \s0
+	not		\t0, \s0
+	bsl		\s0, \s1, \s3
+	bsl		\t0, \s1, \s3
+	bsl		\s3, \t3, \t2
+	eor		\t3, \t3, \t2
+	and		\s2, \s0, \s3
+	eor		\t1, \t1, \t0
+	eor		\s2, \s2, \t3
+	mul_gf16_2	\x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \
+			\s3, \s2, \s1, \t1, \s0, \t0, \t2, \t3
+	.endm
+
+	.macro		sbox, b0, b1, b2, b3, b4, b5, b6, b7, \
+			      t0, t1, t2, t3, s0, s1, s2, s3
+	in_bs_ch	\b0\().16b, \b1\().16b, \b2\().16b, \b3\().16b, \
+			\b4\().16b, \b5\().16b, \b6\().16b, \b7\().16b
+	inv_gf256	\b6\().16b, \b5\().16b, \b0\().16b, \b3\().16b, \
+			\b7\().16b, \b1\().16b, \b4\().16b, \b2\().16b, \
+			\t0\().16b, \t1\().16b, \t2\().16b, \t3\().16b, \
+			\s0\().16b, \s1\().16b, \s2\().16b, \s3\().16b
+	out_bs_ch	\b7\().16b, \b1\().16b, \b4\().16b, \b2\().16b, \
+			\b6\().16b, \b5\().16b, \b0\().16b, \b3\().16b
+	.endm
+
+	.macro		inv_sbox, b0, b1, b2, b3, b4, b5, b6, b7, \
+				  t0, t1, t2, t3, s0, s1, s2, s3
+	inv_in_bs_ch	\b0\().16b, \b1\().16b, \b2\().16b, \b3\().16b, \
+			\b4\().16b, \b5\().16b, \b6\().16b, \b7\().16b
+	inv_gf256	\b5\().16b, \b1\().16b, \b2\().16b, \b6\().16b, \
+			\b3\().16b, \b7\().16b, \b0\().16b, \b4\().16b, \
+			\t0\().16b, \t1\().16b, \t2\().16b, \t3\().16b, \
+			\s0\().16b, \s1\().16b, \s2\().16b, \s3\().16b
+	inv_out_bs_ch	\b3\().16b, \b7\().16b, \b0\().16b, \b4\().16b, \
+			\b5\().16b, \b1\().16b, \b2\().16b, \b6\().16b
+	.endm
+
+	.macro		enc_next_rk
+	ldp		q16, q17, [bskey], #128
+	ldp		q18, q19, [bskey, #-96]
+	ldp		q20, q21, [bskey, #-64]
+	ldp		q22, q23, [bskey, #-32]
+	.endm
+
+	.macro		dec_next_rk
+	ldp		q16, q17, [bskey, #-128]!
+	ldp		q18, q19, [bskey, #32]
+	ldp		q20, q21, [bskey, #64]
+	ldp		q22, q23, [bskey, #96]
+	.endm
+
+	.macro		add_round_key, x0, x1, x2, x3, x4, x5, x6, x7
+	eor		\x0\().16b, \x0\().16b, v16.16b
+	eor		\x1\().16b, \x1\().16b, v17.16b
+	eor		\x2\().16b, \x2\().16b, v18.16b
+	eor		\x3\().16b, \x3\().16b, v19.16b
+	eor		\x4\().16b, \x4\().16b, v20.16b
+	eor		\x5\().16b, \x5\().16b, v21.16b
+	eor		\x6\().16b, \x6\().16b, v22.16b
+	eor		\x7\().16b, \x7\().16b, v23.16b
+	.endm
+
+	.macro		shift_rows, x0, x1, x2, x3, x4, x5, x6, x7, mask
+	tbl		\x0\().16b, {\x0\().16b}, \mask\().16b
+	tbl		\x1\().16b, {\x1\().16b}, \mask\().16b
+	tbl		\x2\().16b, {\x2\().16b}, \mask\().16b
+	tbl		\x3\().16b, {\x3\().16b}, \mask\().16b
+	tbl		\x4\().16b, {\x4\().16b}, \mask\().16b
+	tbl		\x5\().16b, {\x5\().16b}, \mask\().16b
+	tbl		\x6\().16b, {\x6\().16b}, \mask\().16b
+	tbl		\x7\().16b, {\x7\().16b}, \mask\().16b
+	.endm
+
+	.macro		mix_cols, x0, x1, x2, x3, x4, x5, x6, x7, \
+				  t0, t1, t2, t3, t4, t5, t6, t7, inv
+	ext		\t0\().16b, \x0\().16b, \x0\().16b, #12
+	ext		\t1\().16b, \x1\().16b, \x1\().16b, #12
+	eor		\x0\().16b, \x0\().16b, \t0\().16b
+	ext		\t2\().16b, \x2\().16b, \x2\().16b, #12
+	eor		\x1\().16b, \x1\().16b, \t1\().16b
+	ext		\t3\().16b, \x3\().16b, \x3\().16b, #12
+	eor		\x2\().16b, \x2\().16b, \t2\().16b
+	ext		\t4\().16b, \x4\().16b, \x4\().16b, #12
+	eor		\x3\().16b, \x3\().16b, \t3\().16b
+	ext		\t5\().16b, \x5\().16b, \x5\().16b, #12
+	eor		\x4\().16b, \x4\().16b, \t4\().16b
+	ext		\t6\().16b, \x6\().16b, \x6\().16b, #12
+	eor		\x5\().16b, \x5\().16b, \t5\().16b
+	ext		\t7\().16b, \x7\().16b, \x7\().16b, #12
+	eor		\x6\().16b, \x6\().16b, \t6\().16b
+	eor		\t1\().16b, \t1\().16b, \x0\().16b
+	eor		\x7\().16b, \x7\().16b, \t7\().16b
+	ext		\x0\().16b, \x0\().16b, \x0\().16b, #8
+	eor		\t2\().16b, \t2\().16b, \x1\().16b
+	eor		\t0\().16b, \t0\().16b, \x7\().16b
+	eor		\t1\().16b, \t1\().16b, \x7\().16b
+	ext		\x1\().16b, \x1\().16b, \x1\().16b, #8
+	eor		\t5\().16b, \t5\().16b, \x4\().16b
+	eor		\x0\().16b, \x0\().16b, \t0\().16b
+	eor		\t6\().16b, \t6\().16b, \x5\().16b
+	eor		\x1\().16b, \x1\().16b, \t1\().16b
+	ext		\t0\().16b, \x4\().16b, \x4\().16b, #8
+	eor		\t4\().16b, \t4\().16b, \x3\().16b
+	ext		\t1\().16b, \x5\().16b, \x5\().16b, #8
+	eor		\t7\().16b, \t7\().16b, \x6\().16b
+	ext		\x4\().16b, \x3\().16b, \x3\().16b, #8
+	eor		\t3\().16b, \t3\().16b, \x2\().16b
+	ext		\x5\().16b, \x7\().16b, \x7\().16b, #8
+	eor		\t4\().16b, \t4\().16b, \x7\().16b
+	ext		\x3\().16b, \x6\().16b, \x6\().16b, #8
+	eor		\t3\().16b, \t3\().16b, \x7\().16b
+	ext		\x6\().16b, \x2\().16b, \x2\().16b, #8
+	eor		\x7\().16b, \t1\().16b, \t5\().16b
+	.ifb		\inv
+	eor		\x2\().16b, \t0\().16b, \t4\().16b
+	eor		\x4\().16b, \x4\().16b, \t3\().16b
+	eor		\x5\().16b, \x5\().16b, \t7\().16b
+	eor		\x3\().16b, \x3\().16b, \t6\().16b
+	eor		\x6\().16b, \x6\().16b, \t2\().16b
+	.else
+	eor		\t3\().16b, \t3\().16b, \x4\().16b
+	eor		\x5\().16b, \x5\().16b, \t7\().16b
+	eor		\x2\().16b, \x3\().16b, \t6\().16b
+	eor		\x3\().16b, \t0\().16b, \t4\().16b
+	eor		\x4\().16b, \x6\().16b, \t2\().16b
+	mov		\x6\().16b, \t3\().16b
+	.endif
+	.endm
+
+	.macro		inv_mix_cols, x0, x1, x2, x3, x4, x5, x6, x7, \
+				      t0, t1, t2, t3, t4, t5, t6, t7
+	ext		\t0\().16b, \x0\().16b, \x0\().16b, #8
+	ext		\t6\().16b, \x6\().16b, \x6\().16b, #8
+	ext		\t7\().16b, \x7\().16b, \x7\().16b, #8
+	eor		\t0\().16b, \t0\().16b, \x0\().16b
+	ext		\t1\().16b, \x1\().16b, \x1\().16b, #8
+	eor		\t6\().16b, \t6\().16b, \x6\().16b
+	ext		\t2\().16b, \x2\().16b, \x2\().16b, #8
+	eor		\t7\().16b, \t7\().16b, \x7\().16b
+	ext		\t3\().16b, \x3\().16b, \x3\().16b, #8
+	eor		\t1\().16b, \t1\().16b, \x1\().16b
+	ext		\t4\().16b, \x4\().16b, \x4\().16b, #8
+	eor		\t2\().16b, \t2\().16b, \x2\().16b
+	ext		\t5\().16b, \x5\().16b, \x5\().16b, #8
+	eor		\t3\().16b, \t3\().16b, \x3\().16b
+	eor		\t4\().16b, \t4\().16b, \x4\().16b
+	eor		\t5\().16b, \t5\().16b, \x5\().16b
+	eor		\x0\().16b, \x0\().16b, \t6\().16b
+	eor		\x1\().16b, \x1\().16b, \t6\().16b
+	eor		\x2\().16b, \x2\().16b, \t0\().16b
+	eor		\x4\().16b, \x4\().16b, \t2\().16b
+	eor		\x3\().16b, \x3\().16b, \t1\().16b
+	eor		\x1\().16b, \x1\().16b, \t7\().16b
+	eor		\x2\().16b, \x2\().16b, \t7\().16b
+	eor		\x4\().16b, \x4\().16b, \t6\().16b
+	eor		\x5\().16b, \x5\().16b, \t3\().16b
+	eor		\x3\().16b, \x3\().16b, \t6\().16b
+	eor		\x6\().16b, \x6\().16b, \t4\().16b
+	eor		\x4\().16b, \x4\().16b, \t7\().16b
+	eor		\x5\().16b, \x5\().16b, \t7\().16b
+	eor		\x7\().16b, \x7\().16b, \t5\().16b
+	mix_cols	\x0, \x1, \x2, \x3, \x4, \x5, \x6, \x7, \
+			\t0, \t1, \t2, \t3, \t4, \t5, \t6, \t7, 1
+	.endm
+
+	.macro		swapmove_2x, a0, b0, a1, b1, n, mask, t0, t1
+	ushr		\t0\().2d, \b0\().2d, #\n
+	ushr		\t1\().2d, \b1\().2d, #\n
+	eor		\t0\().16b, \t0\().16b, \a0\().16b
+	eor		\t1\().16b, \t1\().16b, \a1\().16b
+	and		\t0\().16b, \t0\().16b, \mask\().16b
+	and		\t1\().16b, \t1\().16b, \mask\().16b
+	eor		\a0\().16b, \a0\().16b, \t0\().16b
+	shl		\t0\().2d, \t0\().2d, #\n
+	eor		\a1\().16b, \a1\().16b, \t1\().16b
+	shl		\t1\().2d, \t1\().2d, #\n
+	eor		\b0\().16b, \b0\().16b, \t0\().16b
+	eor		\b1\().16b, \b1\().16b, \t1\().16b
+	.endm
+
+	.macro		bitslice, x7, x6, x5, x4, x3, x2, x1, x0, t0, t1, t2, t3
+	movi		\t0\().16b, #0x55
+	movi		\t1\().16b, #0x33
+	swapmove_2x	\x0, \x1, \x2, \x3, 1, \t0, \t2, \t3
+	swapmove_2x	\x4, \x5, \x6, \x7, 1, \t0, \t2, \t3
+	movi		\t0\().16b, #0x0f
+	swapmove_2x	\x0, \x2, \x1, \x3, 2, \t1, \t2, \t3
+	swapmove_2x	\x4, \x6, \x5, \x7, 2, \t1, \t2, \t3
+	swapmove_2x	\x0, \x4, \x1, \x5, 4, \t0, \t2, \t3
+	swapmove_2x	\x2, \x6, \x3, \x7, 4, \t0, \t2, \t3
+	.endm
+
+
+	.align		6
+M0:	.octa		0x0004080c0105090d02060a0e03070b0f
+
+M0SR:	.octa		0x0004080c05090d010a0e02060f03070b
+SR:	.octa		0x0f0e0d0c0a09080b0504070600030201
+SRM0:	.octa		0x01060b0c0207080d0304090e00050a0f
+
+M0ISR:	.octa		0x0004080c0d0105090a0e0206070b0f03
+ISR:	.octa		0x0f0e0d0c080b0a090504070602010003
+ISRM0:	.octa		0x0306090c00070a0d01040b0e0205080f
+
+	/*
+	 * void aesbs_convert_key(u8 out[], u32 const rk[], int rounds)
+	 */
+SYM_FUNC_START(aesbs_convert_key)
+	ld1		{v7.4s}, [x1], #16		// load round 0 key
+	ld1		{v17.4s}, [x1], #16		// load round 1 key
+
+	movi		v8.16b,  #0x01			// bit masks
+	movi		v9.16b,  #0x02
+	movi		v10.16b, #0x04
+	movi		v11.16b, #0x08
+	movi		v12.16b, #0x10
+	movi		v13.16b, #0x20
+	movi		v14.16b, #0x40
+	movi		v15.16b, #0x80
+	ldr		q16, M0
+
+	sub		x2, x2, #1
+	str		q7, [x0], #16		// save round 0 key
+
+.Lkey_loop:
+	tbl		v7.16b ,{v17.16b}, v16.16b
+	ld1		{v17.4s}, [x1], #16		// load next round key
+
+	cmtst		v0.16b, v7.16b, v8.16b
+	cmtst		v1.16b, v7.16b, v9.16b
+	cmtst		v2.16b, v7.16b, v10.16b
+	cmtst		v3.16b, v7.16b, v11.16b
+	cmtst		v4.16b, v7.16b, v12.16b
+	cmtst		v5.16b, v7.16b, v13.16b
+	cmtst		v6.16b, v7.16b, v14.16b
+	cmtst		v7.16b, v7.16b, v15.16b
+	not		v0.16b, v0.16b
+	not		v1.16b, v1.16b
+	not		v5.16b, v5.16b
+	not		v6.16b, v6.16b
+
+	subs		x2, x2, #1
+	stp		q0, q1, [x0], #128
+	stp		q2, q3, [x0, #-96]
+	stp		q4, q5, [x0, #-64]
+	stp		q6, q7, [x0, #-32]
+	b.ne		.Lkey_loop
+
+	movi		v7.16b, #0x63			// compose .L63
+	eor		v17.16b, v17.16b, v7.16b
+	str		q17, [x0]
+	ret
+SYM_FUNC_END(aesbs_convert_key)
+
+	.align		4
+SYM_FUNC_START_LOCAL(aesbs_encrypt8)
+	ldr		q9, [bskey], #16		// round 0 key
+	ldr		q8, M0SR
+	ldr		q24, SR
+
+	eor		v10.16b, v0.16b, v9.16b		// xor with round0 key
+	eor		v11.16b, v1.16b, v9.16b
+	tbl		v0.16b, {v10.16b}, v8.16b
+	eor		v12.16b, v2.16b, v9.16b
+	tbl		v1.16b, {v11.16b}, v8.16b
+	eor		v13.16b, v3.16b, v9.16b
+	tbl		v2.16b, {v12.16b}, v8.16b
+	eor		v14.16b, v4.16b, v9.16b
+	tbl		v3.16b, {v13.16b}, v8.16b
+	eor		v15.16b, v5.16b, v9.16b
+	tbl		v4.16b, {v14.16b}, v8.16b
+	eor		v10.16b, v6.16b, v9.16b
+	tbl		v5.16b, {v15.16b}, v8.16b
+	eor		v11.16b, v7.16b, v9.16b
+	tbl		v6.16b, {v10.16b}, v8.16b
+	tbl		v7.16b, {v11.16b}, v8.16b
+
+	bitslice	v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11
+
+	sub		rounds, rounds, #1
+	b		.Lenc_sbox
+
+.Lenc_loop:
+	shift_rows	v0, v1, v2, v3, v4, v5, v6, v7, v24
+.Lenc_sbox:
+	sbox		v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, v12, \
+								v13, v14, v15
+	subs		rounds, rounds, #1
+	b.cc		.Lenc_done
+
+	enc_next_rk
+
+	mix_cols	v0, v1, v4, v6, v3, v7, v2, v5, v8, v9, v10, v11, v12, \
+								v13, v14, v15
+
+	add_round_key	v0, v1, v2, v3, v4, v5, v6, v7
+
+	b.ne		.Lenc_loop
+	ldr		q24, SRM0
+	b		.Lenc_loop
+
+.Lenc_done:
+	ldr		q12, [bskey]			// last round key
+
+	bitslice	v0, v1, v4, v6, v3, v7, v2, v5, v8, v9, v10, v11
+
+	eor		v0.16b, v0.16b, v12.16b
+	eor		v1.16b, v1.16b, v12.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v6.16b, v6.16b, v12.16b
+	eor		v3.16b, v3.16b, v12.16b
+	eor		v7.16b, v7.16b, v12.16b
+	eor		v2.16b, v2.16b, v12.16b
+	eor		v5.16b, v5.16b, v12.16b
+	ret
+SYM_FUNC_END(aesbs_encrypt8)
+
+	.align		4
+SYM_FUNC_START_LOCAL(aesbs_decrypt8)
+	lsl		x9, rounds, #7
+	add		bskey, bskey, x9
+
+	ldr		q9, [bskey, #-112]!		// round 0 key
+	ldr		q8, M0ISR
+	ldr		q24, ISR
+
+	eor		v10.16b, v0.16b, v9.16b		// xor with round0 key
+	eor		v11.16b, v1.16b, v9.16b
+	tbl		v0.16b, {v10.16b}, v8.16b
+	eor		v12.16b, v2.16b, v9.16b
+	tbl		v1.16b, {v11.16b}, v8.16b
+	eor		v13.16b, v3.16b, v9.16b
+	tbl		v2.16b, {v12.16b}, v8.16b
+	eor		v14.16b, v4.16b, v9.16b
+	tbl		v3.16b, {v13.16b}, v8.16b
+	eor		v15.16b, v5.16b, v9.16b
+	tbl		v4.16b, {v14.16b}, v8.16b
+	eor		v10.16b, v6.16b, v9.16b
+	tbl		v5.16b, {v15.16b}, v8.16b
+	eor		v11.16b, v7.16b, v9.16b
+	tbl		v6.16b, {v10.16b}, v8.16b
+	tbl		v7.16b, {v11.16b}, v8.16b
+
+	bitslice	v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11
+
+	sub		rounds, rounds, #1
+	b		.Ldec_sbox
+
+.Ldec_loop:
+	shift_rows	v0, v1, v2, v3, v4, v5, v6, v7, v24
+.Ldec_sbox:
+	inv_sbox	v0, v1, v2, v3, v4, v5, v6, v7, v8, v9, v10, v11, v12, \
+								v13, v14, v15
+	subs		rounds, rounds, #1
+	b.cc		.Ldec_done
+
+	dec_next_rk
+
+	add_round_key	v0, v1, v6, v4, v2, v7, v3, v5
+
+	inv_mix_cols	v0, v1, v6, v4, v2, v7, v3, v5, v8, v9, v10, v11, v12, \
+								v13, v14, v15
+
+	b.ne		.Ldec_loop
+	ldr		q24, ISRM0
+	b		.Ldec_loop
+.Ldec_done:
+	ldr		q12, [bskey, #-16]		// last round key
+
+	bitslice	v0, v1, v6, v4, v2, v7, v3, v5, v8, v9, v10, v11
+
+	eor		v0.16b, v0.16b, v12.16b
+	eor		v1.16b, v1.16b, v12.16b
+	eor		v6.16b, v6.16b, v12.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v2.16b, v2.16b, v12.16b
+	eor		v7.16b, v7.16b, v12.16b
+	eor		v3.16b, v3.16b, v12.16b
+	eor		v5.16b, v5.16b, v12.16b
+	ret
+SYM_FUNC_END(aesbs_decrypt8)
+
+	/*
+	 * aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		     int blocks)
+	 * aesbs_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		     int blocks)
+	 */
+	.macro		__ecb_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7
+	frame_push	5
+
+	mov		x19, x0
+	mov		x20, x1
+	mov		x21, x2
+	mov		x22, x3
+	mov		x23, x4
+
+99:	mov		x5, #1
+	lsl		x5, x5, x23
+	subs		w23, w23, #8
+	csel		x23, x23, xzr, pl
+	csel		x5, x5, xzr, mi
+
+	ld1		{v0.16b}, [x20], #16
+	tbnz		x5, #1, 0f
+	ld1		{v1.16b}, [x20], #16
+	tbnz		x5, #2, 0f
+	ld1		{v2.16b}, [x20], #16
+	tbnz		x5, #3, 0f
+	ld1		{v3.16b}, [x20], #16
+	tbnz		x5, #4, 0f
+	ld1		{v4.16b}, [x20], #16
+	tbnz		x5, #5, 0f
+	ld1		{v5.16b}, [x20], #16
+	tbnz		x5, #6, 0f
+	ld1		{v6.16b}, [x20], #16
+	tbnz		x5, #7, 0f
+	ld1		{v7.16b}, [x20], #16
+
+0:	mov		bskey, x21
+	mov		rounds, x22
+	bl		\do8
+
+	st1		{\o0\().16b}, [x19], #16
+	tbnz		x5, #1, 1f
+	st1		{\o1\().16b}, [x19], #16
+	tbnz		x5, #2, 1f
+	st1		{\o2\().16b}, [x19], #16
+	tbnz		x5, #3, 1f
+	st1		{\o3\().16b}, [x19], #16
+	tbnz		x5, #4, 1f
+	st1		{\o4\().16b}, [x19], #16
+	tbnz		x5, #5, 1f
+	st1		{\o5\().16b}, [x19], #16
+	tbnz		x5, #6, 1f
+	st1		{\o6\().16b}, [x19], #16
+	tbnz		x5, #7, 1f
+	st1		{\o7\().16b}, [x19], #16
+
+	cbz		x23, 1f
+	b		99b
+
+1:	frame_pop
+	ret
+	.endm
+
+	.align		4
+SYM_TYPED_FUNC_START(aesbs_ecb_encrypt)
+	__ecb_crypt	aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
+SYM_FUNC_END(aesbs_ecb_encrypt)
+
+	.align		4
+SYM_TYPED_FUNC_START(aesbs_ecb_decrypt)
+	__ecb_crypt	aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
+SYM_FUNC_END(aesbs_ecb_decrypt)
+
+	/*
+	 * aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		     int blocks, u8 iv[])
+	 */
+	.align		4
+SYM_FUNC_START(aesbs_cbc_decrypt)
+	frame_push	6
+
+	mov		x19, x0
+	mov		x20, x1
+	mov		x21, x2
+	mov		x22, x3
+	mov		x23, x4
+	mov		x24, x5
+
+99:	mov		x6, #1
+	lsl		x6, x6, x23
+	subs		w23, w23, #8
+	csel		x23, x23, xzr, pl
+	csel		x6, x6, xzr, mi
+
+	ld1		{v0.16b}, [x20], #16
+	mov		v25.16b, v0.16b
+	tbnz		x6, #1, 0f
+	ld1		{v1.16b}, [x20], #16
+	mov		v26.16b, v1.16b
+	tbnz		x6, #2, 0f
+	ld1		{v2.16b}, [x20], #16
+	mov		v27.16b, v2.16b
+	tbnz		x6, #3, 0f
+	ld1		{v3.16b}, [x20], #16
+	mov		v28.16b, v3.16b
+	tbnz		x6, #4, 0f
+	ld1		{v4.16b}, [x20], #16
+	mov		v29.16b, v4.16b
+	tbnz		x6, #5, 0f
+	ld1		{v5.16b}, [x20], #16
+	mov		v30.16b, v5.16b
+	tbnz		x6, #6, 0f
+	ld1		{v6.16b}, [x20], #16
+	mov		v31.16b, v6.16b
+	tbnz		x6, #7, 0f
+	ld1		{v7.16b}, [x20]
+
+0:	mov		bskey, x21
+	mov		rounds, x22
+	bl		aesbs_decrypt8
+
+	ld1		{v24.16b}, [x24]		// load IV
+
+	eor		v1.16b, v1.16b, v25.16b
+	eor		v6.16b, v6.16b, v26.16b
+	eor		v4.16b, v4.16b, v27.16b
+	eor		v2.16b, v2.16b, v28.16b
+	eor		v7.16b, v7.16b, v29.16b
+	eor		v0.16b, v0.16b, v24.16b
+	eor		v3.16b, v3.16b, v30.16b
+	eor		v5.16b, v5.16b, v31.16b
+
+	st1		{v0.16b}, [x19], #16
+	mov		v24.16b, v25.16b
+	tbnz		x6, #1, 1f
+	st1		{v1.16b}, [x19], #16
+	mov		v24.16b, v26.16b
+	tbnz		x6, #2, 1f
+	st1		{v6.16b}, [x19], #16
+	mov		v24.16b, v27.16b
+	tbnz		x6, #3, 1f
+	st1		{v4.16b}, [x19], #16
+	mov		v24.16b, v28.16b
+	tbnz		x6, #4, 1f
+	st1		{v2.16b}, [x19], #16
+	mov		v24.16b, v29.16b
+	tbnz		x6, #5, 1f
+	st1		{v7.16b}, [x19], #16
+	mov		v24.16b, v30.16b
+	tbnz		x6, #6, 1f
+	st1		{v3.16b}, [x19], #16
+	mov		v24.16b, v31.16b
+	tbnz		x6, #7, 1f
+	ld1		{v24.16b}, [x20], #16
+	st1		{v5.16b}, [x19], #16
+1:	st1		{v24.16b}, [x24]		// store IV
+
+	cbz		x23, 2f
+	b		99b
+
+2:	frame_pop
+	ret
+SYM_FUNC_END(aesbs_cbc_decrypt)
+
+	.macro		next_tweak, out, in, const, tmp
+	sshr		\tmp\().2d,  \in\().2d,   #63
+	and		\tmp\().16b, \tmp\().16b, \const\().16b
+	add		\out\().2d,  \in\().2d,   \in\().2d
+	ext		\tmp\().16b, \tmp\().16b, \tmp\().16b, #8
+	eor		\out\().16b, \out\().16b, \tmp\().16b
+	.endm
+
+	/*
+	 * aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		     int blocks, u8 iv[])
+	 * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
+	 *		     int blocks, u8 iv[])
+	 */
+SYM_FUNC_START_LOCAL(__xts_crypt8)
+	movi		v18.2s, #0x1
+	movi		v19.2s, #0x87
+	uzp1		v18.4s, v18.4s, v19.4s
+
+	ld1		{v0.16b-v3.16b}, [x1], #64
+	ld1		{v4.16b-v7.16b}, [x1], #64
+
+	next_tweak	v26, v25, v18, v19
+	next_tweak	v27, v26, v18, v19
+	next_tweak	v28, v27, v18, v19
+	next_tweak	v29, v28, v18, v19
+	next_tweak	v30, v29, v18, v19
+	next_tweak	v31, v30, v18, v19
+	next_tweak	v16, v31, v18, v19
+	next_tweak	v17, v16, v18, v19
+
+	eor		v0.16b, v0.16b, v25.16b
+	eor		v1.16b, v1.16b, v26.16b
+	eor		v2.16b, v2.16b, v27.16b
+	eor		v3.16b, v3.16b, v28.16b
+	eor		v4.16b, v4.16b, v29.16b
+	eor		v5.16b, v5.16b, v30.16b
+	eor		v6.16b, v6.16b, v31.16b
+	eor		v7.16b, v7.16b, v16.16b
+
+	stp		q16, q17, [x6]
+
+	mov		bskey, x2
+	mov		rounds, x3
+	br		x16
+SYM_FUNC_END(__xts_crypt8)
+
+	.macro		__xts_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7
+	frame_push	0, 32
+	add		x6, sp, #.Lframe_local_offset
+
+	ld1		{v25.16b}, [x5]
+
+0:	adr		x16, \do8
+	bl		__xts_crypt8
+
+	eor		v16.16b, \o0\().16b, v25.16b
+	eor		v17.16b, \o1\().16b, v26.16b
+	eor		v18.16b, \o2\().16b, v27.16b
+	eor		v19.16b, \o3\().16b, v28.16b
+
+	ldp		q24, q25, [x6]
+
+	eor		v20.16b, \o4\().16b, v29.16b
+	eor		v21.16b, \o5\().16b, v30.16b
+	eor		v22.16b, \o6\().16b, v31.16b
+	eor		v23.16b, \o7\().16b, v24.16b
+
+	st1		{v16.16b-v19.16b}, [x0], #64
+	st1		{v20.16b-v23.16b}, [x0], #64
+
+	subs		x4, x4, #8
+	b.gt		0b
+
+	st1		{v25.16b}, [x5]
+	frame_pop
+	ret
+	.endm
+
+SYM_TYPED_FUNC_START(aesbs_xts_encrypt)
+	__xts_crypt	aesbs_encrypt8, v0, v1, v4, v6, v3, v7, v2, v5
+SYM_FUNC_END(aesbs_xts_encrypt)
+
+SYM_TYPED_FUNC_START(aesbs_xts_decrypt)
+	__xts_crypt	aesbs_decrypt8, v0, v1, v6, v4, v2, v7, v3, v5
+SYM_FUNC_END(aesbs_xts_decrypt)
+
+	.macro		next_ctr, v
+	mov		\v\().d[1], x8
+	adds		x8, x8, #1
+	mov		\v\().d[0], x7
+	adc		x7, x7, xzr
+	rev64		\v\().16b, \v\().16b
+	.endm
+
+	/*
+	 * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
+	 *		     int rounds, int blocks, u8 iv[])
+	 */
+SYM_FUNC_START(aesbs_ctr_encrypt)
+	frame_push	0
+	ldp		x7, x8, [x5]
+	ld1		{v0.16b}, [x5]
+CPU_LE(	rev		x7, x7		)
+CPU_LE(	rev		x8, x8		)
+	adds		x8, x8, #1
+	adc		x7, x7, xzr
+
+0:	next_ctr	v1
+	next_ctr	v2
+	next_ctr	v3
+	next_ctr	v4
+	next_ctr	v5
+	next_ctr	v6
+	next_ctr	v7
+
+	mov		bskey, x2
+	mov		rounds, x3
+	bl		aesbs_encrypt8
+
+	ld1		{ v8.16b-v11.16b}, [x1], #64
+	ld1		{v12.16b-v15.16b}, [x1], #64
+
+	eor		v8.16b, v0.16b, v8.16b
+	eor		v9.16b, v1.16b, v9.16b
+	eor		v10.16b, v4.16b, v10.16b
+	eor		v11.16b, v6.16b, v11.16b
+	eor		v12.16b, v3.16b, v12.16b
+	eor		v13.16b, v7.16b, v13.16b
+	eor		v14.16b, v2.16b, v14.16b
+	eor		v15.16b, v5.16b, v15.16b
+
+	st1		{ v8.16b-v11.16b}, [x0], #64
+	st1		{v12.16b-v15.16b}, [x0], #64
+
+	next_ctr	v0
+	subs		x4, x4, #8
+	b.gt		0b
+
+	st1		{v0.16b}, [x5]
+	frame_pop
+	ret
+SYM_FUNC_END(aesbs_ctr_encrypt)
diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c
new file mode 100644
index 000000000..bac4cabef
--- /dev/null
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Bit sliced AES using NEON instructions
+ *
+ * Copyright (C) 2016 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/aes.h>
+#include <crypto/ctr.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/xts.h>
+#include <linux/module.h>
+
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+
+MODULE_ALIAS_CRYPTO("ecb(aes)");
+MODULE_ALIAS_CRYPTO("cbc(aes)");
+MODULE_ALIAS_CRYPTO("ctr(aes)");
+MODULE_ALIAS_CRYPTO("xts(aes)");
+
+asmlinkage void aesbs_convert_key(u8 out[], u32 const rk[], int rounds);
+
+asmlinkage void aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks);
+asmlinkage void aesbs_ecb_decrypt(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks);
+
+asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks, u8 iv[]);
+
+asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks, u8 iv[]);
+
+asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks, u8 iv[]);
+asmlinkage void aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks, u8 iv[]);
+
+/* borrowed from aes-neon-blk.ko */
+asmlinkage void neon_aes_ecb_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				     int rounds, int blocks);
+asmlinkage void neon_aes_cbc_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				     int rounds, int blocks, u8 iv[]);
+asmlinkage void neon_aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				     int rounds, int bytes, u8 ctr[]);
+asmlinkage void neon_aes_xts_encrypt(u8 out[], u8 const in[],
+				     u32 const rk1[], int rounds, int bytes,
+				     u32 const rk2[], u8 iv[], int first);
+asmlinkage void neon_aes_xts_decrypt(u8 out[], u8 const in[],
+				     u32 const rk1[], int rounds, int bytes,
+				     u32 const rk2[], u8 iv[], int first);
+
+struct aesbs_ctx {
+	u8	rk[13 * (8 * AES_BLOCK_SIZE) + 32];
+	int	rounds;
+} __aligned(AES_BLOCK_SIZE);
+
+struct aesbs_cbc_ctr_ctx {
+	struct aesbs_ctx	key;
+	u32			enc[AES_MAX_KEYLENGTH_U32];
+};
+
+struct aesbs_xts_ctx {
+	struct aesbs_ctx	key;
+	u32			twkey[AES_MAX_KEYLENGTH_U32];
+	struct crypto_aes_ctx	cts;
+};
+
+static int aesbs_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+			unsigned int key_len)
+{
+	struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct crypto_aes_ctx rk;
+	int err;
+
+	err = aes_expandkey(&rk, in_key, key_len);
+	if (err)
+		return err;
+
+	ctx->rounds = 6 + key_len / 4;
+
+	kernel_neon_begin();
+	aesbs_convert_key(ctx->rk, rk.key_enc, ctx->rounds);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int __ecb_crypt(struct skcipher_request *req,
+		       void (*fn)(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks))
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		if (walk.nbytes < walk.total)
+			blocks = round_down(blocks,
+					    walk.stride / AES_BLOCK_SIZE);
+
+		kernel_neon_begin();
+		fn(walk.dst.virt.addr, walk.src.virt.addr, ctx->rk,
+		   ctx->rounds, blocks);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk,
+					 walk.nbytes - blocks * AES_BLOCK_SIZE);
+	}
+
+	return err;
+}
+
+static int ecb_encrypt(struct skcipher_request *req)
+{
+	return __ecb_crypt(req, aesbs_ecb_encrypt);
+}
+
+static int ecb_decrypt(struct skcipher_request *req)
+{
+	return __ecb_crypt(req, aesbs_ecb_decrypt);
+}
+
+static int aesbs_cbc_ctr_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+			    unsigned int key_len)
+{
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct crypto_aes_ctx rk;
+	int err;
+
+	err = aes_expandkey(&rk, in_key, key_len);
+	if (err)
+		return err;
+
+	ctx->key.rounds = 6 + key_len / 4;
+
+	memcpy(ctx->enc, rk.key_enc, sizeof(ctx->enc));
+
+	kernel_neon_begin();
+	aesbs_convert_key(ctx->key.rk, rk.key_enc, ctx->key.rounds);
+	kernel_neon_end();
+	memzero_explicit(&rk, sizeof(rk));
+
+	return 0;
+}
+
+static int cbc_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		/* fall back to the non-bitsliced NEON implementation */
+		kernel_neon_begin();
+		neon_aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				     ctx->enc, ctx->key.rounds, blocks,
+				     walk.iv);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
+	}
+	return err;
+}
+
+static int cbc_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
+
+		if (walk.nbytes < walk.total)
+			blocks = round_down(blocks,
+					    walk.stride / AES_BLOCK_SIZE);
+
+		kernel_neon_begin();
+		aesbs_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
+				  ctx->key.rk, ctx->key.rounds, blocks,
+				  walk.iv);
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk,
+					 walk.nbytes - blocks * AES_BLOCK_SIZE);
+	}
+
+	return err;
+}
+
+static int ctr_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while (walk.nbytes > 0) {
+		int blocks = (walk.nbytes / AES_BLOCK_SIZE) & ~7;
+		int nbytes = walk.nbytes % (8 * AES_BLOCK_SIZE);
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+
+		kernel_neon_begin();
+		if (blocks >= 8) {
+			aesbs_ctr_encrypt(dst, src, ctx->key.rk, ctx->key.rounds,
+					  blocks, walk.iv);
+			dst += blocks * AES_BLOCK_SIZE;
+			src += blocks * AES_BLOCK_SIZE;
+		}
+		if (nbytes && walk.nbytes == walk.total) {
+			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
+					     nbytes, walk.iv);
+			nbytes = 0;
+		}
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+	return err;
+}
+
+static int aesbs_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+			    unsigned int key_len)
+{
+	struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct crypto_aes_ctx rk;
+	int err;
+
+	err = xts_verify_key(tfm, in_key, key_len);
+	if (err)
+		return err;
+
+	key_len /= 2;
+	err = aes_expandkey(&ctx->cts, in_key, key_len);
+	if (err)
+		return err;
+
+	err = aes_expandkey(&rk, in_key + key_len, key_len);
+	if (err)
+		return err;
+
+	memcpy(ctx->twkey, rk.key_enc, sizeof(ctx->twkey));
+
+	return aesbs_setkey(tfm, in_key, key_len);
+}
+
+static int __xts_crypt(struct skcipher_request *req, bool encrypt,
+		       void (*fn)(u8 out[], u8 const in[], u8 const rk[],
+				  int rounds, int blocks, u8 iv[]))
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct aesbs_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int tail = req->cryptlen % (8 * AES_BLOCK_SIZE);
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct scatterlist *src, *dst;
+	struct skcipher_walk walk;
+	int nbytes, err;
+	int first = 1;
+	u8 *out, *in;
+
+	if (req->cryptlen < AES_BLOCK_SIZE)
+		return -EINVAL;
+
+	/* ensure that the cts tail is covered by a single step */
+	if (unlikely(tail > 0 && tail < AES_BLOCK_SIZE)) {
+		int xts_blocks = DIV_ROUND_UP(req->cryptlen,
+					      AES_BLOCK_SIZE) - 2;
+
+		skcipher_request_set_tfm(&subreq, tfm);
+		skcipher_request_set_callback(&subreq,
+					      skcipher_request_flags(req),
+					      NULL, NULL);
+		skcipher_request_set_crypt(&subreq, req->src, req->dst,
+					   xts_blocks * AES_BLOCK_SIZE,
+					   req->iv);
+		req = &subreq;
+	} else {
+		tail = 0;
+	}
+
+	err = skcipher_walk_virt(&walk, req, false);
+	if (err)
+		return err;
+
+	while (walk.nbytes >= AES_BLOCK_SIZE) {
+		int blocks = (walk.nbytes / AES_BLOCK_SIZE) & ~7;
+		out = walk.dst.virt.addr;
+		in = walk.src.virt.addr;
+		nbytes = walk.nbytes;
+
+		kernel_neon_begin();
+		if (blocks >= 8) {
+			if (first == 1)
+				neon_aes_ecb_encrypt(walk.iv, walk.iv,
+						     ctx->twkey,
+						     ctx->key.rounds, 1);
+			first = 2;
+
+			fn(out, in, ctx->key.rk, ctx->key.rounds, blocks,
+			   walk.iv);
+
+			out += blocks * AES_BLOCK_SIZE;
+			in += blocks * AES_BLOCK_SIZE;
+			nbytes -= blocks * AES_BLOCK_SIZE;
+		}
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			if (encrypt)
+				neon_aes_xts_encrypt(out, in, ctx->cts.key_enc,
+						     ctx->key.rounds, nbytes,
+						     ctx->twkey, walk.iv, first);
+			else
+				neon_aes_xts_decrypt(out, in, ctx->cts.key_dec,
+						     ctx->key.rounds, nbytes,
+						     ctx->twkey, walk.iv, first);
+			nbytes = first = 0;
+		}
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	if (err || likely(!tail))
+		return err;
+
+	/* handle ciphertext stealing */
+	dst = src = scatterwalk_ffwd(sg_src, req->src, req->cryptlen);
+	if (req->dst != req->src)
+		dst = scatterwalk_ffwd(sg_dst, req->dst, req->cryptlen);
+
+	skcipher_request_set_crypt(req, src, dst, AES_BLOCK_SIZE + tail,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, req, false);
+	if (err)
+		return err;
+
+	out = walk.dst.virt.addr;
+	in = walk.src.virt.addr;
+	nbytes = walk.nbytes;
+
+	kernel_neon_begin();
+	if (encrypt)
+		neon_aes_xts_encrypt(out, in, ctx->cts.key_enc, ctx->key.rounds,
+				     nbytes, ctx->twkey, walk.iv, first);
+	else
+		neon_aes_xts_decrypt(out, in, ctx->cts.key_dec, ctx->key.rounds,
+				     nbytes, ctx->twkey, walk.iv, first);
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static int xts_encrypt(struct skcipher_request *req)
+{
+	return __xts_crypt(req, true, aesbs_xts_encrypt);
+}
+
+static int xts_decrypt(struct skcipher_request *req)
+{
+	return __xts_crypt(req, false, aesbs_xts_decrypt);
+}
+
+static struct skcipher_alg aes_algs[] = { {
+	.base.cra_name		= "ecb(aes)",
+	.base.cra_driver_name	= "ecb-aes-neonbs",
+	.base.cra_priority	= 250,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
+	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
+	.base.cra_module	= THIS_MODULE,
+
+	.min_keysize		= AES_MIN_KEY_SIZE,
+	.max_keysize		= AES_MAX_KEY_SIZE,
+	.walksize		= 8 * AES_BLOCK_SIZE,
+	.setkey			= aesbs_setkey,
+	.encrypt		= ecb_encrypt,
+	.decrypt		= ecb_decrypt,
+}, {
+	.base.cra_name		= "cbc(aes)",
+	.base.cra_driver_name	= "cbc-aes-neonbs",
+	.base.cra_priority	= 250,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
+	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctr_ctx),
+	.base.cra_module	= THIS_MODULE,
+
+	.min_keysize		= AES_MIN_KEY_SIZE,
+	.max_keysize		= AES_MAX_KEY_SIZE,
+	.walksize		= 8 * AES_BLOCK_SIZE,
+	.ivsize			= AES_BLOCK_SIZE,
+	.setkey			= aesbs_cbc_ctr_setkey,
+	.encrypt		= cbc_encrypt,
+	.decrypt		= cbc_decrypt,
+}, {
+	.base.cra_name		= "ctr(aes)",
+	.base.cra_driver_name	= "ctr-aes-neonbs",
+	.base.cra_priority	= 250,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctr_ctx),
+	.base.cra_module	= THIS_MODULE,
+
+	.min_keysize		= AES_MIN_KEY_SIZE,
+	.max_keysize		= AES_MAX_KEY_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.walksize		= 8 * AES_BLOCK_SIZE,
+	.ivsize			= AES_BLOCK_SIZE,
+	.setkey			= aesbs_cbc_ctr_setkey,
+	.encrypt		= ctr_encrypt,
+	.decrypt		= ctr_encrypt,
+}, {
+	.base.cra_name		= "xts(aes)",
+	.base.cra_driver_name	= "xts-aes-neonbs",
+	.base.cra_priority	= 250,
+	.base.cra_blocksize	= AES_BLOCK_SIZE,
+	.base.cra_ctxsize	= sizeof(struct aesbs_xts_ctx),
+	.base.cra_module	= THIS_MODULE,
+
+	.min_keysize		= 2 * AES_MIN_KEY_SIZE,
+	.max_keysize		= 2 * AES_MAX_KEY_SIZE,
+	.walksize		= 8 * AES_BLOCK_SIZE,
+	.ivsize			= AES_BLOCK_SIZE,
+	.setkey			= aesbs_xts_setkey,
+	.encrypt		= xts_encrypt,
+	.decrypt		= xts_decrypt,
+} };
+
+static void aes_exit(void)
+{
+	crypto_unregister_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+}
+
+static int __init aes_init(void)
+{
+	if (!cpu_have_named_feature(ASIMD))
+		return -ENODEV;
+
+	return crypto_register_skciphers(aes_algs, ARRAY_SIZE(aes_algs));
+}
+
+module_init(aes_init);
+module_exit(aes_exit);
diff --git a/arch/arm64/crypto/chacha-neon-core.S b/arch/arm64/crypto/chacha-neon-core.S
new file mode 100644
index 000000000..b70ac76f2
--- /dev/null
+++ b/arch/arm64/crypto/chacha-neon-core.S
@@ -0,0 +1,805 @@
+/*
+ * ChaCha/XChaCha NEON helper functions
+ *
+ * Copyright (C) 2016-2018 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Originally based on:
+ * ChaCha20 256-bit cipher algorithm, RFC7539, x64 SSSE3 functions
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+	.text
+	.align		6
+
+/*
+ * chacha_permute - permute one block
+ *
+ * Permute one 64-byte block where the state matrix is stored in the four NEON
+ * registers v0-v3.  It performs matrix operations on four words in parallel,
+ * but requires shuffling to rearrange the words after each round.
+ *
+ * The round count is given in w3.
+ *
+ * Clobbers: w3, x10, v4, v12
+ */
+SYM_FUNC_START_LOCAL(chacha_permute)
+
+	adr_l		x10, ROT8
+	ld1		{v12.4s}, [x10]
+
+.Ldoubleround:
+	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
+	add		v0.4s, v0.4s, v1.4s
+	eor		v3.16b, v3.16b, v0.16b
+	rev32		v3.8h, v3.8h
+
+	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
+	add		v2.4s, v2.4s, v3.4s
+	eor		v4.16b, v1.16b, v2.16b
+	shl		v1.4s, v4.4s, #12
+	sri		v1.4s, v4.4s, #20
+
+	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
+	add		v0.4s, v0.4s, v1.4s
+	eor		v3.16b, v3.16b, v0.16b
+	tbl		v3.16b, {v3.16b}, v12.16b
+
+	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
+	add		v2.4s, v2.4s, v3.4s
+	eor		v4.16b, v1.16b, v2.16b
+	shl		v1.4s, v4.4s, #7
+	sri		v1.4s, v4.4s, #25
+
+	// x1 = shuffle32(x1, MASK(0, 3, 2, 1))
+	ext		v1.16b, v1.16b, v1.16b, #4
+	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
+	ext		v2.16b, v2.16b, v2.16b, #8
+	// x3 = shuffle32(x3, MASK(2, 1, 0, 3))
+	ext		v3.16b, v3.16b, v3.16b, #12
+
+	// x0 += x1, x3 = rotl32(x3 ^ x0, 16)
+	add		v0.4s, v0.4s, v1.4s
+	eor		v3.16b, v3.16b, v0.16b
+	rev32		v3.8h, v3.8h
+
+	// x2 += x3, x1 = rotl32(x1 ^ x2, 12)
+	add		v2.4s, v2.4s, v3.4s
+	eor		v4.16b, v1.16b, v2.16b
+	shl		v1.4s, v4.4s, #12
+	sri		v1.4s, v4.4s, #20
+
+	// x0 += x1, x3 = rotl32(x3 ^ x0, 8)
+	add		v0.4s, v0.4s, v1.4s
+	eor		v3.16b, v3.16b, v0.16b
+	tbl		v3.16b, {v3.16b}, v12.16b
+
+	// x2 += x3, x1 = rotl32(x1 ^ x2, 7)
+	add		v2.4s, v2.4s, v3.4s
+	eor		v4.16b, v1.16b, v2.16b
+	shl		v1.4s, v4.4s, #7
+	sri		v1.4s, v4.4s, #25
+
+	// x1 = shuffle32(x1, MASK(2, 1, 0, 3))
+	ext		v1.16b, v1.16b, v1.16b, #12
+	// x2 = shuffle32(x2, MASK(1, 0, 3, 2))
+	ext		v2.16b, v2.16b, v2.16b, #8
+	// x3 = shuffle32(x3, MASK(0, 3, 2, 1))
+	ext		v3.16b, v3.16b, v3.16b, #4
+
+	subs		w3, w3, #2
+	b.ne		.Ldoubleround
+
+	ret
+SYM_FUNC_END(chacha_permute)
+
+SYM_FUNC_START(chacha_block_xor_neon)
+	// x0: Input state matrix, s
+	// x1: 1 data block output, o
+	// x2: 1 data block input, i
+	// w3: nrounds
+
+	stp		x29, x30, [sp, #-16]!
+	mov		x29, sp
+
+	// x0..3 = s0..3
+	ld1		{v0.4s-v3.4s}, [x0]
+	ld1		{v8.4s-v11.4s}, [x0]
+
+	bl		chacha_permute
+
+	ld1		{v4.16b-v7.16b}, [x2]
+
+	// o0 = i0 ^ (x0 + s0)
+	add		v0.4s, v0.4s, v8.4s
+	eor		v0.16b, v0.16b, v4.16b
+
+	// o1 = i1 ^ (x1 + s1)
+	add		v1.4s, v1.4s, v9.4s
+	eor		v1.16b, v1.16b, v5.16b
+
+	// o2 = i2 ^ (x2 + s2)
+	add		v2.4s, v2.4s, v10.4s
+	eor		v2.16b, v2.16b, v6.16b
+
+	// o3 = i3 ^ (x3 + s3)
+	add		v3.4s, v3.4s, v11.4s
+	eor		v3.16b, v3.16b, v7.16b
+
+	st1		{v0.16b-v3.16b}, [x1]
+
+	ldp		x29, x30, [sp], #16
+	ret
+SYM_FUNC_END(chacha_block_xor_neon)
+
+SYM_FUNC_START(hchacha_block_neon)
+	// x0: Input state matrix, s
+	// x1: output (8 32-bit words)
+	// w2: nrounds
+
+	stp		x29, x30, [sp, #-16]!
+	mov		x29, sp
+
+	ld1		{v0.4s-v3.4s}, [x0]
+
+	mov		w3, w2
+	bl		chacha_permute
+
+	st1		{v0.4s}, [x1], #16
+	st1		{v3.4s}, [x1]
+
+	ldp		x29, x30, [sp], #16
+	ret
+SYM_FUNC_END(hchacha_block_neon)
+
+	a0		.req	w12
+	a1		.req	w13
+	a2		.req	w14
+	a3		.req	w15
+	a4		.req	w16
+	a5		.req	w17
+	a6		.req	w19
+	a7		.req	w20
+	a8		.req	w21
+	a9		.req	w22
+	a10		.req	w23
+	a11		.req	w24
+	a12		.req	w25
+	a13		.req	w26
+	a14		.req	w27
+	a15		.req	w28
+
+	.align		6
+SYM_FUNC_START(chacha_4block_xor_neon)
+	frame_push	10
+
+	// x0: Input state matrix, s
+	// x1: 4 data blocks output, o
+	// x2: 4 data blocks input, i
+	// w3: nrounds
+	// x4: byte count
+
+	adr_l		x10, .Lpermute
+	and		x5, x4, #63
+	add		x10, x10, x5
+
+	//
+	// This function encrypts four consecutive ChaCha blocks by loading
+	// the state matrix in NEON registers four times. The algorithm performs
+	// each operation on the corresponding word of each state matrix, hence
+	// requires no word shuffling. For final XORing step we transpose the
+	// matrix by interleaving 32- and then 64-bit words, which allows us to
+	// do XOR in NEON registers.
+	//
+	// At the same time, a fifth block is encrypted in parallel using
+	// scalar registers
+	//
+	adr_l		x9, CTRINC		// ... and ROT8
+	ld1		{v30.4s-v31.4s}, [x9]
+
+	// x0..15[0-3] = s0..3[0..3]
+	add		x8, x0, #16
+	ld4r		{ v0.4s- v3.4s}, [x0]
+	ld4r		{ v4.4s- v7.4s}, [x8], #16
+	ld4r		{ v8.4s-v11.4s}, [x8], #16
+	ld4r		{v12.4s-v15.4s}, [x8]
+
+	mov		a0, v0.s[0]
+	mov		a1, v1.s[0]
+	mov		a2, v2.s[0]
+	mov		a3, v3.s[0]
+	mov		a4, v4.s[0]
+	mov		a5, v5.s[0]
+	mov		a6, v6.s[0]
+	mov		a7, v7.s[0]
+	mov		a8, v8.s[0]
+	mov		a9, v9.s[0]
+	mov		a10, v10.s[0]
+	mov		a11, v11.s[0]
+	mov		a12, v12.s[0]
+	mov		a13, v13.s[0]
+	mov		a14, v14.s[0]
+	mov		a15, v15.s[0]
+
+	// x12 += counter values 1-4
+	add		v12.4s, v12.4s, v30.4s
+
+.Ldoubleround4:
+	// x0 += x4, x12 = rotl32(x12 ^ x0, 16)
+	// x1 += x5, x13 = rotl32(x13 ^ x1, 16)
+	// x2 += x6, x14 = rotl32(x14 ^ x2, 16)
+	// x3 += x7, x15 = rotl32(x15 ^ x3, 16)
+	add		v0.4s, v0.4s, v4.4s
+	  add		a0, a0, a4
+	add		v1.4s, v1.4s, v5.4s
+	  add		a1, a1, a5
+	add		v2.4s, v2.4s, v6.4s
+	  add		a2, a2, a6
+	add		v3.4s, v3.4s, v7.4s
+	  add		a3, a3, a7
+
+	eor		v12.16b, v12.16b, v0.16b
+	  eor		a12, a12, a0
+	eor		v13.16b, v13.16b, v1.16b
+	  eor		a13, a13, a1
+	eor		v14.16b, v14.16b, v2.16b
+	  eor		a14, a14, a2
+	eor		v15.16b, v15.16b, v3.16b
+	  eor		a15, a15, a3
+
+	rev32		v12.8h, v12.8h
+	  ror		a12, a12, #16
+	rev32		v13.8h, v13.8h
+	  ror		a13, a13, #16
+	rev32		v14.8h, v14.8h
+	  ror		a14, a14, #16
+	rev32		v15.8h, v15.8h
+	  ror		a15, a15, #16
+
+	// x8 += x12, x4 = rotl32(x4 ^ x8, 12)
+	// x9 += x13, x5 = rotl32(x5 ^ x9, 12)
+	// x10 += x14, x6 = rotl32(x6 ^ x10, 12)
+	// x11 += x15, x7 = rotl32(x7 ^ x11, 12)
+	add		v8.4s, v8.4s, v12.4s
+	  add		a8, a8, a12
+	add		v9.4s, v9.4s, v13.4s
+	  add		a9, a9, a13
+	add		v10.4s, v10.4s, v14.4s
+	  add		a10, a10, a14
+	add		v11.4s, v11.4s, v15.4s
+	  add		a11, a11, a15
+
+	eor		v16.16b, v4.16b, v8.16b
+	  eor		a4, a4, a8
+	eor		v17.16b, v5.16b, v9.16b
+	  eor		a5, a5, a9
+	eor		v18.16b, v6.16b, v10.16b
+	  eor		a6, a6, a10
+	eor		v19.16b, v7.16b, v11.16b
+	  eor		a7, a7, a11
+
+	shl		v4.4s, v16.4s, #12
+	shl		v5.4s, v17.4s, #12
+	shl		v6.4s, v18.4s, #12
+	shl		v7.4s, v19.4s, #12
+
+	sri		v4.4s, v16.4s, #20
+	  ror		a4, a4, #20
+	sri		v5.4s, v17.4s, #20
+	  ror		a5, a5, #20
+	sri		v6.4s, v18.4s, #20
+	  ror		a6, a6, #20
+	sri		v7.4s, v19.4s, #20
+	  ror		a7, a7, #20
+
+	// x0 += x4, x12 = rotl32(x12 ^ x0, 8)
+	// x1 += x5, x13 = rotl32(x13 ^ x1, 8)
+	// x2 += x6, x14 = rotl32(x14 ^ x2, 8)
+	// x3 += x7, x15 = rotl32(x15 ^ x3, 8)
+	add		v0.4s, v0.4s, v4.4s
+	  add		a0, a0, a4
+	add		v1.4s, v1.4s, v5.4s
+	  add		a1, a1, a5
+	add		v2.4s, v2.4s, v6.4s
+	  add		a2, a2, a6
+	add		v3.4s, v3.4s, v7.4s
+	  add		a3, a3, a7
+
+	eor		v12.16b, v12.16b, v0.16b
+	  eor		a12, a12, a0
+	eor		v13.16b, v13.16b, v1.16b
+	  eor		a13, a13, a1
+	eor		v14.16b, v14.16b, v2.16b
+	  eor		a14, a14, a2
+	eor		v15.16b, v15.16b, v3.16b
+	  eor		a15, a15, a3
+
+	tbl		v12.16b, {v12.16b}, v31.16b
+	  ror		a12, a12, #24
+	tbl		v13.16b, {v13.16b}, v31.16b
+	  ror		a13, a13, #24
+	tbl		v14.16b, {v14.16b}, v31.16b
+	  ror		a14, a14, #24
+	tbl		v15.16b, {v15.16b}, v31.16b
+	  ror		a15, a15, #24
+
+	// x8 += x12, x4 = rotl32(x4 ^ x8, 7)
+	// x9 += x13, x5 = rotl32(x5 ^ x9, 7)
+	// x10 += x14, x6 = rotl32(x6 ^ x10, 7)
+	// x11 += x15, x7 = rotl32(x7 ^ x11, 7)
+	add		v8.4s, v8.4s, v12.4s
+	  add		a8, a8, a12
+	add		v9.4s, v9.4s, v13.4s
+	  add		a9, a9, a13
+	add		v10.4s, v10.4s, v14.4s
+	  add		a10, a10, a14
+	add		v11.4s, v11.4s, v15.4s
+	  add		a11, a11, a15
+
+	eor		v16.16b, v4.16b, v8.16b
+	  eor		a4, a4, a8
+	eor		v17.16b, v5.16b, v9.16b
+	  eor		a5, a5, a9
+	eor		v18.16b, v6.16b, v10.16b
+	  eor		a6, a6, a10
+	eor		v19.16b, v7.16b, v11.16b
+	  eor		a7, a7, a11
+
+	shl		v4.4s, v16.4s, #7
+	shl		v5.4s, v17.4s, #7
+	shl		v6.4s, v18.4s, #7
+	shl		v7.4s, v19.4s, #7
+
+	sri		v4.4s, v16.4s, #25
+	  ror		a4, a4, #25
+	sri		v5.4s, v17.4s, #25
+	  ror		a5, a5, #25
+	sri		v6.4s, v18.4s, #25
+	 ror		a6, a6, #25
+	sri		v7.4s, v19.4s, #25
+	  ror		a7, a7, #25
+
+	// x0 += x5, x15 = rotl32(x15 ^ x0, 16)
+	// x1 += x6, x12 = rotl32(x12 ^ x1, 16)
+	// x2 += x7, x13 = rotl32(x13 ^ x2, 16)
+	// x3 += x4, x14 = rotl32(x14 ^ x3, 16)
+	add		v0.4s, v0.4s, v5.4s
+	  add		a0, a0, a5
+	add		v1.4s, v1.4s, v6.4s
+	  add		a1, a1, a6
+	add		v2.4s, v2.4s, v7.4s
+	  add		a2, a2, a7
+	add		v3.4s, v3.4s, v4.4s
+	  add		a3, a3, a4
+
+	eor		v15.16b, v15.16b, v0.16b
+	  eor		a15, a15, a0
+	eor		v12.16b, v12.16b, v1.16b
+	  eor		a12, a12, a1
+	eor		v13.16b, v13.16b, v2.16b
+	  eor		a13, a13, a2
+	eor		v14.16b, v14.16b, v3.16b
+	  eor		a14, a14, a3
+
+	rev32		v15.8h, v15.8h
+	  ror		a15, a15, #16
+	rev32		v12.8h, v12.8h
+	  ror		a12, a12, #16
+	rev32		v13.8h, v13.8h
+	  ror		a13, a13, #16
+	rev32		v14.8h, v14.8h
+	  ror		a14, a14, #16
+
+	// x10 += x15, x5 = rotl32(x5 ^ x10, 12)
+	// x11 += x12, x6 = rotl32(x6 ^ x11, 12)
+	// x8 += x13, x7 = rotl32(x7 ^ x8, 12)
+	// x9 += x14, x4 = rotl32(x4 ^ x9, 12)
+	add		v10.4s, v10.4s, v15.4s
+	  add		a10, a10, a15
+	add		v11.4s, v11.4s, v12.4s
+	  add		a11, a11, a12
+	add		v8.4s, v8.4s, v13.4s
+	  add		a8, a8, a13
+	add		v9.4s, v9.4s, v14.4s
+	  add		a9, a9, a14
+
+	eor		v16.16b, v5.16b, v10.16b
+	  eor		a5, a5, a10
+	eor		v17.16b, v6.16b, v11.16b
+	  eor		a6, a6, a11
+	eor		v18.16b, v7.16b, v8.16b
+	  eor		a7, a7, a8
+	eor		v19.16b, v4.16b, v9.16b
+	  eor		a4, a4, a9
+
+	shl		v5.4s, v16.4s, #12
+	shl		v6.4s, v17.4s, #12
+	shl		v7.4s, v18.4s, #12
+	shl		v4.4s, v19.4s, #12
+
+	sri		v5.4s, v16.4s, #20
+	  ror		a5, a5, #20
+	sri		v6.4s, v17.4s, #20
+	  ror		a6, a6, #20
+	sri		v7.4s, v18.4s, #20
+	  ror		a7, a7, #20
+	sri		v4.4s, v19.4s, #20
+	  ror		a4, a4, #20
+
+	// x0 += x5, x15 = rotl32(x15 ^ x0, 8)
+	// x1 += x6, x12 = rotl32(x12 ^ x1, 8)
+	// x2 += x7, x13 = rotl32(x13 ^ x2, 8)
+	// x3 += x4, x14 = rotl32(x14 ^ x3, 8)
+	add		v0.4s, v0.4s, v5.4s
+	  add		a0, a0, a5
+	add		v1.4s, v1.4s, v6.4s
+	  add		a1, a1, a6
+	add		v2.4s, v2.4s, v7.4s
+	  add		a2, a2, a7
+	add		v3.4s, v3.4s, v4.4s
+	  add		a3, a3, a4
+
+	eor		v15.16b, v15.16b, v0.16b
+	  eor		a15, a15, a0
+	eor		v12.16b, v12.16b, v1.16b
+	  eor		a12, a12, a1
+	eor		v13.16b, v13.16b, v2.16b
+	  eor		a13, a13, a2
+	eor		v14.16b, v14.16b, v3.16b
+	  eor		a14, a14, a3
+
+	tbl		v15.16b, {v15.16b}, v31.16b
+	  ror		a15, a15, #24
+	tbl		v12.16b, {v12.16b}, v31.16b
+	  ror		a12, a12, #24
+	tbl		v13.16b, {v13.16b}, v31.16b
+	  ror		a13, a13, #24
+	tbl		v14.16b, {v14.16b}, v31.16b
+	  ror		a14, a14, #24
+
+	// x10 += x15, x5 = rotl32(x5 ^ x10, 7)
+	// x11 += x12, x6 = rotl32(x6 ^ x11, 7)
+	// x8 += x13, x7 = rotl32(x7 ^ x8, 7)
+	// x9 += x14, x4 = rotl32(x4 ^ x9, 7)
+	add		v10.4s, v10.4s, v15.4s
+	  add		a10, a10, a15
+	add		v11.4s, v11.4s, v12.4s
+	  add		a11, a11, a12
+	add		v8.4s, v8.4s, v13.4s
+	  add		a8, a8, a13
+	add		v9.4s, v9.4s, v14.4s
+	  add		a9, a9, a14
+
+	eor		v16.16b, v5.16b, v10.16b
+	  eor		a5, a5, a10
+	eor		v17.16b, v6.16b, v11.16b
+	  eor		a6, a6, a11
+	eor		v18.16b, v7.16b, v8.16b
+	  eor		a7, a7, a8
+	eor		v19.16b, v4.16b, v9.16b
+	  eor		a4, a4, a9
+
+	shl		v5.4s, v16.4s, #7
+	shl		v6.4s, v17.4s, #7
+	shl		v7.4s, v18.4s, #7
+	shl		v4.4s, v19.4s, #7
+
+	sri		v5.4s, v16.4s, #25
+	  ror		a5, a5, #25
+	sri		v6.4s, v17.4s, #25
+	  ror		a6, a6, #25
+	sri		v7.4s, v18.4s, #25
+	  ror		a7, a7, #25
+	sri		v4.4s, v19.4s, #25
+	  ror		a4, a4, #25
+
+	subs		w3, w3, #2
+	b.ne		.Ldoubleround4
+
+	ld4r		{v16.4s-v19.4s}, [x0], #16
+	ld4r		{v20.4s-v23.4s}, [x0], #16
+
+	// x12 += counter values 0-3
+	add		v12.4s, v12.4s, v30.4s
+
+	// x0[0-3] += s0[0]
+	// x1[0-3] += s0[1]
+	// x2[0-3] += s0[2]
+	// x3[0-3] += s0[3]
+	add		v0.4s, v0.4s, v16.4s
+	  mov		w6, v16.s[0]
+	  mov		w7, v17.s[0]
+	add		v1.4s, v1.4s, v17.4s
+	  mov		w8, v18.s[0]
+	  mov		w9, v19.s[0]
+	add		v2.4s, v2.4s, v18.4s
+	  add		a0, a0, w6
+	  add		a1, a1, w7
+	add		v3.4s, v3.4s, v19.4s
+	  add		a2, a2, w8
+	  add		a3, a3, w9
+CPU_BE(	  rev		a0, a0		)
+CPU_BE(	  rev		a1, a1		)
+CPU_BE(	  rev		a2, a2		)
+CPU_BE(	  rev		a3, a3		)
+
+	ld4r		{v24.4s-v27.4s}, [x0], #16
+	ld4r		{v28.4s-v31.4s}, [x0]
+
+	// x4[0-3] += s1[0]
+	// x5[0-3] += s1[1]
+	// x6[0-3] += s1[2]
+	// x7[0-3] += s1[3]
+	add		v4.4s, v4.4s, v20.4s
+	  mov		w6, v20.s[0]
+	  mov		w7, v21.s[0]
+	add		v5.4s, v5.4s, v21.4s
+	  mov		w8, v22.s[0]
+	  mov		w9, v23.s[0]
+	add		v6.4s, v6.4s, v22.4s
+	  add		a4, a4, w6
+	  add		a5, a5, w7
+	add		v7.4s, v7.4s, v23.4s
+	  add		a6, a6, w8
+	  add		a7, a7, w9
+CPU_BE(	  rev		a4, a4		)
+CPU_BE(	  rev		a5, a5		)
+CPU_BE(	  rev		a6, a6		)
+CPU_BE(	  rev		a7, a7		)
+
+	// x8[0-3] += s2[0]
+	// x9[0-3] += s2[1]
+	// x10[0-3] += s2[2]
+	// x11[0-3] += s2[3]
+	add		v8.4s, v8.4s, v24.4s
+	  mov		w6, v24.s[0]
+	  mov		w7, v25.s[0]
+	add		v9.4s, v9.4s, v25.4s
+	  mov		w8, v26.s[0]
+	  mov		w9, v27.s[0]
+	add		v10.4s, v10.4s, v26.4s
+	  add		a8, a8, w6
+	  add		a9, a9, w7
+	add		v11.4s, v11.4s, v27.4s
+	  add		a10, a10, w8
+	  add		a11, a11, w9
+CPU_BE(	  rev		a8, a8		)
+CPU_BE(	  rev		a9, a9		)
+CPU_BE(	  rev		a10, a10	)
+CPU_BE(	  rev		a11, a11	)
+
+	// x12[0-3] += s3[0]
+	// x13[0-3] += s3[1]
+	// x14[0-3] += s3[2]
+	// x15[0-3] += s3[3]
+	add		v12.4s, v12.4s, v28.4s
+	  mov		w6, v28.s[0]
+	  mov		w7, v29.s[0]
+	add		v13.4s, v13.4s, v29.4s
+	  mov		w8, v30.s[0]
+	  mov		w9, v31.s[0]
+	add		v14.4s, v14.4s, v30.4s
+	  add		a12, a12, w6
+	  add		a13, a13, w7
+	add		v15.4s, v15.4s, v31.4s
+	  add		a14, a14, w8
+	  add		a15, a15, w9
+CPU_BE(	  rev		a12, a12	)
+CPU_BE(	  rev		a13, a13	)
+CPU_BE(	  rev		a14, a14	)
+CPU_BE(	  rev		a15, a15	)
+
+	// interleave 32-bit words in state n, n+1
+	  ldp		w6, w7, [x2], #64
+	zip1		v16.4s, v0.4s, v1.4s
+	  ldp		w8, w9, [x2, #-56]
+	  eor		a0, a0, w6
+	zip2		v17.4s, v0.4s, v1.4s
+	  eor		a1, a1, w7
+	zip1		v18.4s, v2.4s, v3.4s
+	  eor		a2, a2, w8
+	zip2		v19.4s, v2.4s, v3.4s
+	  eor		a3, a3, w9
+	  ldp		w6, w7, [x2, #-48]
+	zip1		v20.4s, v4.4s, v5.4s
+	  ldp		w8, w9, [x2, #-40]
+	  eor		a4, a4, w6
+	zip2		v21.4s, v4.4s, v5.4s
+	  eor		a5, a5, w7
+	zip1		v22.4s, v6.4s, v7.4s
+	  eor		a6, a6, w8
+	zip2		v23.4s, v6.4s, v7.4s
+	  eor		a7, a7, w9
+	  ldp		w6, w7, [x2, #-32]
+	zip1		v24.4s, v8.4s, v9.4s
+	  ldp		w8, w9, [x2, #-24]
+	  eor		a8, a8, w6
+	zip2		v25.4s, v8.4s, v9.4s
+	  eor		a9, a9, w7
+	zip1		v26.4s, v10.4s, v11.4s
+	  eor		a10, a10, w8
+	zip2		v27.4s, v10.4s, v11.4s
+	  eor		a11, a11, w9
+	  ldp		w6, w7, [x2, #-16]
+	zip1		v28.4s, v12.4s, v13.4s
+	  ldp		w8, w9, [x2, #-8]
+	  eor		a12, a12, w6
+	zip2		v29.4s, v12.4s, v13.4s
+	  eor		a13, a13, w7
+	zip1		v30.4s, v14.4s, v15.4s
+	  eor		a14, a14, w8
+	zip2		v31.4s, v14.4s, v15.4s
+	  eor		a15, a15, w9
+
+	add		x3, x2, x4
+	sub		x3, x3, #128		// start of last block
+
+	subs		x5, x4, #128
+	csel		x2, x2, x3, ge
+
+	// interleave 64-bit words in state n, n+2
+	zip1		v0.2d, v16.2d, v18.2d
+	zip2		v4.2d, v16.2d, v18.2d
+	  stp		a0, a1, [x1], #64
+	zip1		v8.2d, v17.2d, v19.2d
+	zip2		v12.2d, v17.2d, v19.2d
+	  stp		a2, a3, [x1, #-56]
+
+	subs		x6, x4, #192
+	ld1		{v16.16b-v19.16b}, [x2], #64
+	csel		x2, x2, x3, ge
+
+	zip1		v1.2d, v20.2d, v22.2d
+	zip2		v5.2d, v20.2d, v22.2d
+	  stp		a4, a5, [x1, #-48]
+	zip1		v9.2d, v21.2d, v23.2d
+	zip2		v13.2d, v21.2d, v23.2d
+	  stp		a6, a7, [x1, #-40]
+
+	subs		x7, x4, #256
+	ld1		{v20.16b-v23.16b}, [x2], #64
+	csel		x2, x2, x3, ge
+
+	zip1		v2.2d, v24.2d, v26.2d
+	zip2		v6.2d, v24.2d, v26.2d
+	  stp		a8, a9, [x1, #-32]
+	zip1		v10.2d, v25.2d, v27.2d
+	zip2		v14.2d, v25.2d, v27.2d
+	  stp		a10, a11, [x1, #-24]
+
+	subs		x8, x4, #320
+	ld1		{v24.16b-v27.16b}, [x2], #64
+	csel		x2, x2, x3, ge
+
+	zip1		v3.2d, v28.2d, v30.2d
+	zip2		v7.2d, v28.2d, v30.2d
+	  stp		a12, a13, [x1, #-16]
+	zip1		v11.2d, v29.2d, v31.2d
+	zip2		v15.2d, v29.2d, v31.2d
+	  stp		a14, a15, [x1, #-8]
+
+	tbnz		x5, #63, .Lt128
+	ld1		{v28.16b-v31.16b}, [x2]
+
+	// xor with corresponding input, write to output
+	eor		v16.16b, v16.16b, v0.16b
+	eor		v17.16b, v17.16b, v1.16b
+	eor		v18.16b, v18.16b, v2.16b
+	eor		v19.16b, v19.16b, v3.16b
+
+	tbnz		x6, #63, .Lt192
+
+	eor		v20.16b, v20.16b, v4.16b
+	eor		v21.16b, v21.16b, v5.16b
+	eor		v22.16b, v22.16b, v6.16b
+	eor		v23.16b, v23.16b, v7.16b
+
+	st1		{v16.16b-v19.16b}, [x1], #64
+	tbnz		x7, #63, .Lt256
+
+	eor		v24.16b, v24.16b, v8.16b
+	eor		v25.16b, v25.16b, v9.16b
+	eor		v26.16b, v26.16b, v10.16b
+	eor		v27.16b, v27.16b, v11.16b
+
+	st1		{v20.16b-v23.16b}, [x1], #64
+	tbnz		x8, #63, .Lt320
+
+	eor		v28.16b, v28.16b, v12.16b
+	eor		v29.16b, v29.16b, v13.16b
+	eor		v30.16b, v30.16b, v14.16b
+	eor		v31.16b, v31.16b, v15.16b
+
+	st1		{v24.16b-v27.16b}, [x1], #64
+	st1		{v28.16b-v31.16b}, [x1]
+
+.Lout:	frame_pop
+	ret
+
+	// fewer than 192 bytes of in/output
+.Lt192:	cbz		x5, 1f				// exactly 128 bytes?
+	ld1		{v28.16b-v31.16b}, [x10]
+	add		x5, x5, x1
+	tbl		v28.16b, {v4.16b-v7.16b}, v28.16b
+	tbl		v29.16b, {v4.16b-v7.16b}, v29.16b
+	tbl		v30.16b, {v4.16b-v7.16b}, v30.16b
+	tbl		v31.16b, {v4.16b-v7.16b}, v31.16b
+
+0:	eor		v20.16b, v20.16b, v28.16b
+	eor		v21.16b, v21.16b, v29.16b
+	eor		v22.16b, v22.16b, v30.16b
+	eor		v23.16b, v23.16b, v31.16b
+	st1		{v20.16b-v23.16b}, [x5]		// overlapping stores
+1:	st1		{v16.16b-v19.16b}, [x1]
+	b		.Lout
+
+	// fewer than 128 bytes of in/output
+.Lt128:	ld1		{v28.16b-v31.16b}, [x10]
+	add		x5, x5, x1
+	sub		x1, x1, #64
+	tbl		v28.16b, {v0.16b-v3.16b}, v28.16b
+	tbl		v29.16b, {v0.16b-v3.16b}, v29.16b
+	tbl		v30.16b, {v0.16b-v3.16b}, v30.16b
+	tbl		v31.16b, {v0.16b-v3.16b}, v31.16b
+	ld1		{v16.16b-v19.16b}, [x1]		// reload first output block
+	b		0b
+
+	// fewer than 256 bytes of in/output
+.Lt256:	cbz		x6, 2f				// exactly 192 bytes?
+	ld1		{v4.16b-v7.16b}, [x10]
+	add		x6, x6, x1
+	tbl		v0.16b, {v8.16b-v11.16b}, v4.16b
+	tbl		v1.16b, {v8.16b-v11.16b}, v5.16b
+	tbl		v2.16b, {v8.16b-v11.16b}, v6.16b
+	tbl		v3.16b, {v8.16b-v11.16b}, v7.16b
+
+	eor		v28.16b, v28.16b, v0.16b
+	eor		v29.16b, v29.16b, v1.16b
+	eor		v30.16b, v30.16b, v2.16b
+	eor		v31.16b, v31.16b, v3.16b
+	st1		{v28.16b-v31.16b}, [x6]		// overlapping stores
+2:	st1		{v20.16b-v23.16b}, [x1]
+	b		.Lout
+
+	// fewer than 320 bytes of in/output
+.Lt320:	cbz		x7, 3f				// exactly 256 bytes?
+	ld1		{v4.16b-v7.16b}, [x10]
+	add		x7, x7, x1
+	tbl		v0.16b, {v12.16b-v15.16b}, v4.16b
+	tbl		v1.16b, {v12.16b-v15.16b}, v5.16b
+	tbl		v2.16b, {v12.16b-v15.16b}, v6.16b
+	tbl		v3.16b, {v12.16b-v15.16b}, v7.16b
+
+	eor		v28.16b, v28.16b, v0.16b
+	eor		v29.16b, v29.16b, v1.16b
+	eor		v30.16b, v30.16b, v2.16b
+	eor		v31.16b, v31.16b, v3.16b
+	st1		{v28.16b-v31.16b}, [x7]		// overlapping stores
+3:	st1		{v24.16b-v27.16b}, [x1]
+	b		.Lout
+SYM_FUNC_END(chacha_4block_xor_neon)
+
+	.section	".rodata", "a", %progbits
+	.align		L1_CACHE_SHIFT
+.Lpermute:
+	.set		.Li, 0
+	.rept		128
+	.byte		(.Li - 64)
+	.set		.Li, .Li + 1
+	.endr
+
+CTRINC:	.word		1, 2, 3, 4
+ROT8:	.word		0x02010003, 0x06050407, 0x0a09080b, 0x0e0d0c0f
diff --git a/arch/arm64/crypto/chacha-neon-glue.c b/arch/arm64/crypto/chacha-neon-glue.c
new file mode 100644
index 000000000..af2bbca38
--- /dev/null
+++ b/arch/arm64/crypto/chacha-neon-glue.c
@@ -0,0 +1,243 @@
+/*
+ * ARM NEON and scalar accelerated ChaCha and XChaCha stream ciphers,
+ * including ChaCha20 (RFC7539)
+ *
+ * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on:
+ * ChaCha20 256-bit cipher algorithm, RFC7539, SIMD glue code
+ *
+ * Copyright (C) 2015 Martin Willi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/internal/chacha.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+
+asmlinkage void chacha_block_xor_neon(u32 *state, u8 *dst, const u8 *src,
+				      int nrounds);
+asmlinkage void chacha_4block_xor_neon(u32 *state, u8 *dst, const u8 *src,
+				       int nrounds, int bytes);
+asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+
+static void chacha_doneon(u32 *state, u8 *dst, const u8 *src,
+			  int bytes, int nrounds)
+{
+	while (bytes > 0) {
+		int l = min(bytes, CHACHA_BLOCK_SIZE * 5);
+
+		if (l <= CHACHA_BLOCK_SIZE) {
+			u8 buf[CHACHA_BLOCK_SIZE];
+
+			memcpy(buf, src, l);
+			chacha_block_xor_neon(state, buf, buf, nrounds);
+			memcpy(dst, buf, l);
+			state[12] += 1;
+			break;
+		}
+		chacha_4block_xor_neon(state, dst, src, nrounds, l);
+		bytes -= l;
+		src += l;
+		dst += l;
+		state[12] += DIV_ROUND_UP(l, CHACHA_BLOCK_SIZE);
+	}
+}
+
+void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
+{
+	if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) {
+		hchacha_block_generic(state, stream, nrounds);
+	} else {
+		kernel_neon_begin();
+		hchacha_block_neon(state, stream, nrounds);
+		kernel_neon_end();
+	}
+}
+EXPORT_SYMBOL(hchacha_block_arch);
+
+void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
+{
+	chacha_init_generic(state, key, iv);
+}
+EXPORT_SYMBOL(chacha_init_arch);
+
+void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
+		       int nrounds)
+{
+	if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE ||
+	    !crypto_simd_usable())
+		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
+
+	do {
+		unsigned int todo = min_t(unsigned int, bytes, SZ_4K);
+
+		kernel_neon_begin();
+		chacha_doneon(state, dst, src, todo, nrounds);
+		kernel_neon_end();
+
+		bytes -= todo;
+		src += todo;
+		dst += todo;
+	} while (bytes);
+}
+EXPORT_SYMBOL(chacha_crypt_arch);
+
+static int chacha_neon_stream_xor(struct skcipher_request *req,
+				  const struct chacha_ctx *ctx, const u8 *iv)
+{
+	struct skcipher_walk walk;
+	u32 state[16];
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	chacha_init_generic(state, ctx->key, iv);
+
+	while (walk.nbytes > 0) {
+		unsigned int nbytes = walk.nbytes;
+
+		if (nbytes < walk.total)
+			nbytes = rounddown(nbytes, walk.stride);
+
+		if (!static_branch_likely(&have_neon) ||
+		    !crypto_simd_usable()) {
+			chacha_crypt_generic(state, walk.dst.virt.addr,
+					     walk.src.virt.addr, nbytes,
+					     ctx->nrounds);
+		} else {
+			kernel_neon_begin();
+			chacha_doneon(state, walk.dst.virt.addr,
+				      walk.src.virt.addr, nbytes, ctx->nrounds);
+			kernel_neon_end();
+		}
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	}
+
+	return err;
+}
+
+static int chacha_neon(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return chacha_neon_stream_xor(req, ctx, req->iv);
+}
+
+static int xchacha_neon(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct chacha_ctx subctx;
+	u32 state[16];
+	u8 real_iv[16];
+
+	chacha_init_generic(state, ctx->key, req->iv);
+	hchacha_block_arch(state, subctx.key, ctx->nrounds);
+	subctx.nrounds = ctx->nrounds;
+
+	memcpy(&real_iv[0], req->iv + 24, 8);
+	memcpy(&real_iv[8], req->iv + 16, 8);
+	return chacha_neon_stream_xor(req, &subctx, real_iv);
+}
+
+static struct skcipher_alg algs[] = {
+	{
+		.base.cra_name		= "chacha20",
+		.base.cra_driver_name	= "chacha20-neon",
+		.base.cra_priority	= 300,
+		.base.cra_blocksize	= 1,
+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
+		.base.cra_module	= THIS_MODULE,
+
+		.min_keysize		= CHACHA_KEY_SIZE,
+		.max_keysize		= CHACHA_KEY_SIZE,
+		.ivsize			= CHACHA_IV_SIZE,
+		.chunksize		= CHACHA_BLOCK_SIZE,
+		.walksize		= 5 * CHACHA_BLOCK_SIZE,
+		.setkey			= chacha20_setkey,
+		.encrypt		= chacha_neon,
+		.decrypt		= chacha_neon,
+	}, {
+		.base.cra_name		= "xchacha20",
+		.base.cra_driver_name	= "xchacha20-neon",
+		.base.cra_priority	= 300,
+		.base.cra_blocksize	= 1,
+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
+		.base.cra_module	= THIS_MODULE,
+
+		.min_keysize		= CHACHA_KEY_SIZE,
+		.max_keysize		= CHACHA_KEY_SIZE,
+		.ivsize			= XCHACHA_IV_SIZE,
+		.chunksize		= CHACHA_BLOCK_SIZE,
+		.walksize		= 5 * CHACHA_BLOCK_SIZE,
+		.setkey			= chacha20_setkey,
+		.encrypt		= xchacha_neon,
+		.decrypt		= xchacha_neon,
+	}, {
+		.base.cra_name		= "xchacha12",
+		.base.cra_driver_name	= "xchacha12-neon",
+		.base.cra_priority	= 300,
+		.base.cra_blocksize	= 1,
+		.base.cra_ctxsize	= sizeof(struct chacha_ctx),
+		.base.cra_module	= THIS_MODULE,
+
+		.min_keysize		= CHACHA_KEY_SIZE,
+		.max_keysize		= CHACHA_KEY_SIZE,
+		.ivsize			= XCHACHA_IV_SIZE,
+		.chunksize		= CHACHA_BLOCK_SIZE,
+		.walksize		= 5 * CHACHA_BLOCK_SIZE,
+		.setkey			= chacha12_setkey,
+		.encrypt		= xchacha_neon,
+		.decrypt		= xchacha_neon,
+	}
+};
+
+static int __init chacha_simd_mod_init(void)
+{
+	if (!cpu_have_named_feature(ASIMD))
+		return 0;
+
+	static_branch_enable(&have_neon);
+
+	return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ?
+		crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0;
+}
+
+static void __exit chacha_simd_mod_fini(void)
+{
+	if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) && cpu_have_named_feature(ASIMD))
+		crypto_unregister_skciphers(algs, ARRAY_SIZE(algs));
+}
+
+module_init(chacha_simd_mod_init);
+module_exit(chacha_simd_mod_fini);
+
+MODULE_DESCRIPTION("ChaCha and XChaCha stream ciphers (NEON accelerated)");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("chacha20");
+MODULE_ALIAS_CRYPTO("chacha20-neon");
+MODULE_ALIAS_CRYPTO("xchacha20");
+MODULE_ALIAS_CRYPTO("xchacha20-neon");
+MODULE_ALIAS_CRYPTO("xchacha12");
+MODULE_ALIAS_CRYPTO("xchacha12-neon");
diff --git a/arch/arm64/crypto/crct10dif-ce-core.S b/arch/arm64/crypto/crct10dif-ce-core.S
new file mode 100644
index 000000000..5604de61d
--- /dev/null
+++ b/arch/arm64/crypto/crct10dif-ce-core.S
@@ -0,0 +1,514 @@
+//
+// Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions
+//
+// Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+// Copyright (C) 2019 Google LLC <ebiggers@google.com>
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License version 2 as
+// published by the Free Software Foundation.
+//
+
+// Derived from the x86 version:
+//
+// Implement fast CRC-T10DIF computation with SSE and PCLMULQDQ instructions
+//
+// Copyright (c) 2013, Intel Corporation
+//
+// Authors:
+//     Erdinc Ozturk <erdinc.ozturk@intel.com>
+//     Vinodh Gopal <vinodh.gopal@intel.com>
+//     James Guilford <james.guilford@intel.com>
+//     Tim Chen <tim.c.chen@linux.intel.com>
+//
+// This software is available to you under a choice of one of two
+// licenses.  You may choose to be licensed under the terms of the GNU
+// General Public License (GPL) Version 2, available from the file
+// COPYING in the main directory of this source tree, or the
+// OpenIB.org BSD license below:
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+//   notice, this list of conditions and the following disclaimer.
+//
+// * Redistributions in binary form must reproduce the above copyright
+//   notice, this list of conditions and the following disclaimer in the
+//   documentation and/or other materials provided with the
+//   distribution.
+//
+// * Neither the name of the Intel Corporation nor the names of its
+//   contributors may be used to endorse or promote products derived from
+//   this software without specific prior written permission.
+//
+//
+// THIS SOFTWARE IS PROVIDED BY INTEL CORPORATION ""AS IS"" AND ANY
+// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL INTEL CORPORATION OR
+// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//
+//       Reference paper titled "Fast CRC Computation for Generic
+//	Polynomials Using PCLMULQDQ Instruction"
+//       URL: http://www.intel.com/content/dam/www/public/us/en/documents
+//  /white-papers/fast-crc-computation-generic-polynomials-pclmulqdq-paper.pdf
+//
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+	.arch		armv8-a+crypto
+
+	init_crc	.req	w0
+	buf		.req	x1
+	len		.req	x2
+	fold_consts_ptr	.req	x3
+
+	fold_consts	.req	v10
+
+	ad		.req	v14
+
+	k00_16		.req	v15
+	k32_48		.req	v16
+
+	t3		.req	v17
+	t4		.req	v18
+	t5		.req	v19
+	t6		.req	v20
+	t7		.req	v21
+	t8		.req	v22
+	t9		.req	v23
+
+	perm1		.req	v24
+	perm2		.req	v25
+	perm3		.req	v26
+	perm4		.req	v27
+
+	bd1		.req	v28
+	bd2		.req	v29
+	bd3		.req	v30
+	bd4		.req	v31
+
+	.macro		__pmull_init_p64
+	.endm
+
+	.macro		__pmull_pre_p64, bd
+	.endm
+
+	.macro		__pmull_init_p8
+	// k00_16 := 0x0000000000000000_000000000000ffff
+	// k32_48 := 0x00000000ffffffff_0000ffffffffffff
+	movi		k32_48.2d, #0xffffffff
+	mov		k32_48.h[2], k32_48.h[0]
+	ushr		k00_16.2d, k32_48.2d, #32
+
+	// prepare the permutation vectors
+	mov_q		x5, 0x080f0e0d0c0b0a09
+	movi		perm4.8b, #8
+	dup		perm1.2d, x5
+	eor		perm1.16b, perm1.16b, perm4.16b
+	ushr		perm2.2d, perm1.2d, #8
+	ushr		perm3.2d, perm1.2d, #16
+	ushr		perm4.2d, perm1.2d, #24
+	sli		perm2.2d, perm1.2d, #56
+	sli		perm3.2d, perm1.2d, #48
+	sli		perm4.2d, perm1.2d, #40
+	.endm
+
+	.macro		__pmull_pre_p8, bd
+	tbl		bd1.16b, {\bd\().16b}, perm1.16b
+	tbl		bd2.16b, {\bd\().16b}, perm2.16b
+	tbl		bd3.16b, {\bd\().16b}, perm3.16b
+	tbl		bd4.16b, {\bd\().16b}, perm4.16b
+	.endm
+
+SYM_FUNC_START_LOCAL(__pmull_p8_core)
+.L__pmull_p8_core:
+	ext		t4.8b, ad.8b, ad.8b, #1			// A1
+	ext		t5.8b, ad.8b, ad.8b, #2			// A2
+	ext		t6.8b, ad.8b, ad.8b, #3			// A3
+
+	pmull		t4.8h, t4.8b, fold_consts.8b		// F = A1*B
+	pmull		t8.8h, ad.8b, bd1.8b			// E = A*B1
+	pmull		t5.8h, t5.8b, fold_consts.8b		// H = A2*B
+	pmull		t7.8h, ad.8b, bd2.8b			// G = A*B2
+	pmull		t6.8h, t6.8b, fold_consts.8b		// J = A3*B
+	pmull		t9.8h, ad.8b, bd3.8b			// I = A*B3
+	pmull		t3.8h, ad.8b, bd4.8b			// K = A*B4
+	b		0f
+
+.L__pmull_p8_core2:
+	tbl		t4.16b, {ad.16b}, perm1.16b		// A1
+	tbl		t5.16b, {ad.16b}, perm2.16b		// A2
+	tbl		t6.16b, {ad.16b}, perm3.16b		// A3
+
+	pmull2		t4.8h, t4.16b, fold_consts.16b		// F = A1*B
+	pmull2		t8.8h, ad.16b, bd1.16b			// E = A*B1
+	pmull2		t5.8h, t5.16b, fold_consts.16b		// H = A2*B
+	pmull2		t7.8h, ad.16b, bd2.16b			// G = A*B2
+	pmull2		t6.8h, t6.16b, fold_consts.16b		// J = A3*B
+	pmull2		t9.8h, ad.16b, bd3.16b			// I = A*B3
+	pmull2		t3.8h, ad.16b, bd4.16b			// K = A*B4
+
+0:	eor		t4.16b, t4.16b, t8.16b			// L = E + F
+	eor		t5.16b, t5.16b, t7.16b			// M = G + H
+	eor		t6.16b, t6.16b, t9.16b			// N = I + J
+
+	uzp1		t8.2d, t4.2d, t5.2d
+	uzp2		t4.2d, t4.2d, t5.2d
+	uzp1		t7.2d, t6.2d, t3.2d
+	uzp2		t6.2d, t6.2d, t3.2d
+
+	// t4 = (L) (P0 + P1) << 8
+	// t5 = (M) (P2 + P3) << 16
+	eor		t8.16b, t8.16b, t4.16b
+	and		t4.16b, t4.16b, k32_48.16b
+
+	// t6 = (N) (P4 + P5) << 24
+	// t7 = (K) (P6 + P7) << 32
+	eor		t7.16b, t7.16b, t6.16b
+	and		t6.16b, t6.16b, k00_16.16b
+
+	eor		t8.16b, t8.16b, t4.16b
+	eor		t7.16b, t7.16b, t6.16b
+
+	zip2		t5.2d, t8.2d, t4.2d
+	zip1		t4.2d, t8.2d, t4.2d
+	zip2		t3.2d, t7.2d, t6.2d
+	zip1		t6.2d, t7.2d, t6.2d
+
+	ext		t4.16b, t4.16b, t4.16b, #15
+	ext		t5.16b, t5.16b, t5.16b, #14
+	ext		t6.16b, t6.16b, t6.16b, #13
+	ext		t3.16b, t3.16b, t3.16b, #12
+
+	eor		t4.16b, t4.16b, t5.16b
+	eor		t6.16b, t6.16b, t3.16b
+	ret
+SYM_FUNC_END(__pmull_p8_core)
+
+	.macro		__pmull_p8, rq, ad, bd, i
+	.ifnc		\bd, fold_consts
+	.err
+	.endif
+	mov		ad.16b, \ad\().16b
+	.ifb		\i
+	pmull		\rq\().8h, \ad\().8b, \bd\().8b		// D = A*B
+	.else
+	pmull2		\rq\().8h, \ad\().16b, \bd\().16b	// D = A*B
+	.endif
+
+	bl		.L__pmull_p8_core\i
+
+	eor		\rq\().16b, \rq\().16b, t4.16b
+	eor		\rq\().16b, \rq\().16b, t6.16b
+	.endm
+
+	// Fold reg1, reg2 into the next 32 data bytes, storing the result back
+	// into reg1, reg2.
+	.macro		fold_32_bytes, p, reg1, reg2
+	ldp		q11, q12, [buf], #0x20
+
+	__pmull_\p	v8, \reg1, fold_consts, 2
+	__pmull_\p	\reg1, \reg1, fold_consts
+
+CPU_LE(	rev64		v11.16b, v11.16b		)
+CPU_LE(	rev64		v12.16b, v12.16b		)
+
+	__pmull_\p	v9, \reg2, fold_consts, 2
+	__pmull_\p	\reg2, \reg2, fold_consts
+
+CPU_LE(	ext		v11.16b, v11.16b, v11.16b, #8	)
+CPU_LE(	ext		v12.16b, v12.16b, v12.16b, #8	)
+
+	eor		\reg1\().16b, \reg1\().16b, v8.16b
+	eor		\reg2\().16b, \reg2\().16b, v9.16b
+	eor		\reg1\().16b, \reg1\().16b, v11.16b
+	eor		\reg2\().16b, \reg2\().16b, v12.16b
+	.endm
+
+	// Fold src_reg into dst_reg, optionally loading the next fold constants
+	.macro		fold_16_bytes, p, src_reg, dst_reg, load_next_consts
+	__pmull_\p	v8, \src_reg, fold_consts
+	__pmull_\p	\src_reg, \src_reg, fold_consts, 2
+	.ifnb		\load_next_consts
+	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
+	__pmull_pre_\p	fold_consts
+	.endif
+	eor		\dst_reg\().16b, \dst_reg\().16b, v8.16b
+	eor		\dst_reg\().16b, \dst_reg\().16b, \src_reg\().16b
+	.endm
+
+	.macro		__pmull_p64, rd, rn, rm, n
+	.ifb		\n
+	pmull		\rd\().1q, \rn\().1d, \rm\().1d
+	.else
+	pmull2		\rd\().1q, \rn\().2d, \rm\().2d
+	.endif
+	.endm
+
+	.macro		crc_t10dif_pmull, p
+	__pmull_init_\p
+
+	// For sizes less than 256 bytes, we can't fold 128 bytes at a time.
+	cmp		len, #256
+	b.lt		.Lless_than_256_bytes_\@
+
+	adr_l		fold_consts_ptr, .Lfold_across_128_bytes_consts
+
+	// Load the first 128 data bytes.  Byte swapping is necessary to make
+	// the bit order match the polynomial coefficient order.
+	ldp		q0, q1, [buf]
+	ldp		q2, q3, [buf, #0x20]
+	ldp		q4, q5, [buf, #0x40]
+	ldp		q6, q7, [buf, #0x60]
+	add		buf, buf, #0x80
+CPU_LE(	rev64		v0.16b, v0.16b			)
+CPU_LE(	rev64		v1.16b, v1.16b			)
+CPU_LE(	rev64		v2.16b, v2.16b			)
+CPU_LE(	rev64		v3.16b, v3.16b			)
+CPU_LE(	rev64		v4.16b, v4.16b			)
+CPU_LE(	rev64		v5.16b, v5.16b			)
+CPU_LE(	rev64		v6.16b, v6.16b			)
+CPU_LE(	rev64		v7.16b, v7.16b			)
+CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
+CPU_LE(	ext		v1.16b, v1.16b, v1.16b, #8	)
+CPU_LE(	ext		v2.16b, v2.16b, v2.16b, #8	)
+CPU_LE(	ext		v3.16b, v3.16b, v3.16b, #8	)
+CPU_LE(	ext		v4.16b, v4.16b, v4.16b, #8	)
+CPU_LE(	ext		v5.16b, v5.16b, v5.16b, #8	)
+CPU_LE(	ext		v6.16b, v6.16b, v6.16b, #8	)
+CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
+
+	// XOR the first 16 data *bits* with the initial CRC value.
+	movi		v8.16b, #0
+	mov		v8.h[7], init_crc
+	eor		v0.16b, v0.16b, v8.16b
+
+	// Load the constants for folding across 128 bytes.
+	ld1		{fold_consts.2d}, [fold_consts_ptr]
+	__pmull_pre_\p	fold_consts
+
+	// Subtract 128 for the 128 data bytes just consumed.  Subtract another
+	// 128 to simplify the termination condition of the following loop.
+	sub		len, len, #256
+
+	// While >= 128 data bytes remain (not counting v0-v7), fold the 128
+	// bytes v0-v7 into them, storing the result back into v0-v7.
+.Lfold_128_bytes_loop_\@:
+	fold_32_bytes	\p, v0, v1
+	fold_32_bytes	\p, v2, v3
+	fold_32_bytes	\p, v4, v5
+	fold_32_bytes	\p, v6, v7
+
+	subs		len, len, #128
+	b.ge		.Lfold_128_bytes_loop_\@
+
+	// Now fold the 112 bytes in v0-v6 into the 16 bytes in v7.
+
+	// Fold across 64 bytes.
+	add		fold_consts_ptr, fold_consts_ptr, #16
+	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
+	__pmull_pre_\p	fold_consts
+	fold_16_bytes	\p, v0, v4
+	fold_16_bytes	\p, v1, v5
+	fold_16_bytes	\p, v2, v6
+	fold_16_bytes	\p, v3, v7, 1
+	// Fold across 32 bytes.
+	fold_16_bytes	\p, v4, v6
+	fold_16_bytes	\p, v5, v7, 1
+	// Fold across 16 bytes.
+	fold_16_bytes	\p, v6, v7
+
+	// Add 128 to get the correct number of data bytes remaining in 0...127
+	// (not counting v7), following the previous extra subtraction by 128.
+	// Then subtract 16 to simplify the termination condition of the
+	// following loop.
+	adds		len, len, #(128-16)
+
+	// While >= 16 data bytes remain (not counting v7), fold the 16 bytes v7
+	// into them, storing the result back into v7.
+	b.lt		.Lfold_16_bytes_loop_done_\@
+.Lfold_16_bytes_loop_\@:
+	__pmull_\p	v8, v7, fold_consts
+	__pmull_\p	v7, v7, fold_consts, 2
+	eor		v7.16b, v7.16b, v8.16b
+	ldr		q0, [buf], #16
+CPU_LE(	rev64		v0.16b, v0.16b			)
+CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
+	eor		v7.16b, v7.16b, v0.16b
+	subs		len, len, #16
+	b.ge		.Lfold_16_bytes_loop_\@
+
+.Lfold_16_bytes_loop_done_\@:
+	// Add 16 to get the correct number of data bytes remaining in 0...15
+	// (not counting v7), following the previous extra subtraction by 16.
+	adds		len, len, #16
+	b.eq		.Lreduce_final_16_bytes_\@
+
+.Lhandle_partial_segment_\@:
+	// Reduce the last '16 + len' bytes where 1 <= len <= 15 and the first
+	// 16 bytes are in v7 and the rest are the remaining data in 'buf'.  To
+	// do this without needing a fold constant for each possible 'len',
+	// redivide the bytes into a first chunk of 'len' bytes and a second
+	// chunk of 16 bytes, then fold the first chunk into the second.
+
+	// v0 = last 16 original data bytes
+	add		buf, buf, len
+	ldr		q0, [buf, #-16]
+CPU_LE(	rev64		v0.16b, v0.16b			)
+CPU_LE(	ext		v0.16b, v0.16b, v0.16b, #8	)
+
+	// v1 = high order part of second chunk: v7 left-shifted by 'len' bytes.
+	adr_l		x4, .Lbyteshift_table + 16
+	sub		x4, x4, len
+	ld1		{v2.16b}, [x4]
+	tbl		v1.16b, {v7.16b}, v2.16b
+
+	// v3 = first chunk: v7 right-shifted by '16-len' bytes.
+	movi		v3.16b, #0x80
+	eor		v2.16b, v2.16b, v3.16b
+	tbl		v3.16b, {v7.16b}, v2.16b
+
+	// Convert to 8-bit masks: 'len' 0x00 bytes, then '16-len' 0xff bytes.
+	sshr		v2.16b, v2.16b, #7
+
+	// v2 = second chunk: 'len' bytes from v0 (low-order bytes),
+	// then '16-len' bytes from v1 (high-order bytes).
+	bsl		v2.16b, v1.16b, v0.16b
+
+	// Fold the first chunk into the second chunk, storing the result in v7.
+	__pmull_\p	v0, v3, fold_consts
+	__pmull_\p	v7, v3, fold_consts, 2
+	eor		v7.16b, v7.16b, v0.16b
+	eor		v7.16b, v7.16b, v2.16b
+
+.Lreduce_final_16_bytes_\@:
+	// Reduce the 128-bit value M(x), stored in v7, to the final 16-bit CRC.
+
+	movi		v2.16b, #0		// init zero register
+
+	// Load 'x^48 * (x^48 mod G(x))' and 'x^48 * (x^80 mod G(x))'.
+	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
+	__pmull_pre_\p	fold_consts
+
+	// Fold the high 64 bits into the low 64 bits, while also multiplying by
+	// x^64.  This produces a 128-bit value congruent to x^64 * M(x) and
+	// whose low 48 bits are 0.
+	ext		v0.16b, v2.16b, v7.16b, #8
+	__pmull_\p	v7, v7, fold_consts, 2	// high bits * x^48 * (x^80 mod G(x))
+	eor		v0.16b, v0.16b, v7.16b	// + low bits * x^64
+
+	// Fold the high 32 bits into the low 96 bits.  This produces a 96-bit
+	// value congruent to x^64 * M(x) and whose low 48 bits are 0.
+	ext		v1.16b, v0.16b, v2.16b, #12	// extract high 32 bits
+	mov		v0.s[3], v2.s[0]	// zero high 32 bits
+	__pmull_\p	v1, v1, fold_consts	// high 32 bits * x^48 * (x^48 mod G(x))
+	eor		v0.16b, v0.16b, v1.16b	// + low bits
+
+	// Load G(x) and floor(x^48 / G(x)).
+	ld1		{fold_consts.2d}, [fold_consts_ptr]
+	__pmull_pre_\p	fold_consts
+
+	// Use Barrett reduction to compute the final CRC value.
+	__pmull_\p	v1, v0, fold_consts, 2	// high 32 bits * floor(x^48 / G(x))
+	ushr		v1.2d, v1.2d, #32	// /= x^32
+	__pmull_\p	v1, v1, fold_consts	// *= G(x)
+	ushr		v0.2d, v0.2d, #48
+	eor		v0.16b, v0.16b, v1.16b	// + low 16 nonzero bits
+	// Final CRC value (x^16 * M(x)) mod G(x) is in low 16 bits of v0.
+
+	umov		w0, v0.h[0]
+	.ifc		\p, p8
+	frame_pop
+	.endif
+	ret
+
+.Lless_than_256_bytes_\@:
+	// Checksumming a buffer of length 16...255 bytes
+
+	adr_l		fold_consts_ptr, .Lfold_across_16_bytes_consts
+
+	// Load the first 16 data bytes.
+	ldr		q7, [buf], #0x10
+CPU_LE(	rev64		v7.16b, v7.16b			)
+CPU_LE(	ext		v7.16b, v7.16b, v7.16b, #8	)
+
+	// XOR the first 16 data *bits* with the initial CRC value.
+	movi		v0.16b, #0
+	mov		v0.h[7], init_crc
+	eor		v7.16b, v7.16b, v0.16b
+
+	// Load the fold-across-16-bytes constants.
+	ld1		{fold_consts.2d}, [fold_consts_ptr], #16
+	__pmull_pre_\p	fold_consts
+
+	cmp		len, #16
+	b.eq		.Lreduce_final_16_bytes_\@	// len == 16
+	subs		len, len, #32
+	b.ge		.Lfold_16_bytes_loop_\@		// 32 <= len <= 255
+	add		len, len, #16
+	b		.Lhandle_partial_segment_\@	// 17 <= len <= 31
+	.endm
+
+//
+// u16 crc_t10dif_pmull_p8(u16 init_crc, const u8 *buf, size_t len);
+//
+// Assumes len >= 16.
+//
+SYM_FUNC_START(crc_t10dif_pmull_p8)
+	frame_push	1
+	crc_t10dif_pmull p8
+SYM_FUNC_END(crc_t10dif_pmull_p8)
+
+	.align		5
+//
+// u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 *buf, size_t len);
+//
+// Assumes len >= 16.
+//
+SYM_FUNC_START(crc_t10dif_pmull_p64)
+	crc_t10dif_pmull	p64
+SYM_FUNC_END(crc_t10dif_pmull_p64)
+
+	.section	".rodata", "a"
+	.align		4
+
+// Fold constants precomputed from the polynomial 0x18bb7
+// G(x) = x^16 + x^15 + x^11 + x^9 + x^8 + x^7 + x^5 + x^4 + x^2 + x^1 + x^0
+.Lfold_across_128_bytes_consts:
+	.quad		0x0000000000006123	// x^(8*128)	mod G(x)
+	.quad		0x0000000000002295	// x^(8*128+64)	mod G(x)
+// .Lfold_across_64_bytes_consts:
+	.quad		0x0000000000001069	// x^(4*128)	mod G(x)
+	.quad		0x000000000000dd31	// x^(4*128+64)	mod G(x)
+// .Lfold_across_32_bytes_consts:
+	.quad		0x000000000000857d	// x^(2*128)	mod G(x)
+	.quad		0x0000000000007acc	// x^(2*128+64)	mod G(x)
+.Lfold_across_16_bytes_consts:
+	.quad		0x000000000000a010	// x^(1*128)	mod G(x)
+	.quad		0x0000000000001faa	// x^(1*128+64)	mod G(x)
+// .Lfinal_fold_consts:
+	.quad		0x1368000000000000	// x^48 * (x^48 mod G(x))
+	.quad		0x2d56000000000000	// x^48 * (x^80 mod G(x))
+// .Lbarrett_reduction_consts:
+	.quad		0x0000000000018bb7	// G(x)
+	.quad		0x00000001f65a57f8	// floor(x^48 / G(x))
+
+// For 1 <= len <= 15, the 16-byte vector beginning at &byteshift_table[16 -
+// len] is the index vector to shift left by 'len' bytes, and is also {0x80,
+// ..., 0x80} XOR the index vector to shift right by '16 - len' bytes.
+.Lbyteshift_table:
+	.byte		 0x0, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87
+	.byte		0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe , 0x0
diff --git a/arch/arm64/crypto/crct10dif-ce-glue.c b/arch/arm64/crypto/crct10dif-ce-glue.c
new file mode 100644
index 000000000..09eb1456a
--- /dev/null
+++ b/arch/arm64/crypto/crct10dif-ce-glue.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Accelerated CRC-T10DIF using arm64 NEON and Crypto Extensions instructions
+ *
+ * Copyright (C) 2016 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/cpufeature.h>
+#include <linux/crc-t10dif.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+
+#define CRC_T10DIF_PMULL_CHUNK_SIZE	16U
+
+asmlinkage u16 crc_t10dif_pmull_p8(u16 init_crc, const u8 *buf, size_t len);
+asmlinkage u16 crc_t10dif_pmull_p64(u16 init_crc, const u8 *buf, size_t len);
+
+static int crct10dif_init(struct shash_desc *desc)
+{
+	u16 *crc = shash_desc_ctx(desc);
+
+	*crc = 0;
+	return 0;
+}
+
+static int crct10dif_update_pmull_p8(struct shash_desc *desc, const u8 *data,
+			    unsigned int length)
+{
+	u16 *crc = shash_desc_ctx(desc);
+
+	if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
+		do {
+			unsigned int chunk = length;
+
+			if (chunk > SZ_4K + CRC_T10DIF_PMULL_CHUNK_SIZE)
+				chunk = SZ_4K;
+
+			kernel_neon_begin();
+			*crc = crc_t10dif_pmull_p8(*crc, data, chunk);
+			kernel_neon_end();
+			data += chunk;
+			length -= chunk;
+		} while (length);
+	} else {
+		*crc = crc_t10dif_generic(*crc, data, length);
+	}
+
+	return 0;
+}
+
+static int crct10dif_update_pmull_p64(struct shash_desc *desc, const u8 *data,
+			    unsigned int length)
+{
+	u16 *crc = shash_desc_ctx(desc);
+
+	if (length >= CRC_T10DIF_PMULL_CHUNK_SIZE && crypto_simd_usable()) {
+		do {
+			unsigned int chunk = length;
+
+			if (chunk > SZ_4K + CRC_T10DIF_PMULL_CHUNK_SIZE)
+				chunk = SZ_4K;
+
+			kernel_neon_begin();
+			*crc = crc_t10dif_pmull_p64(*crc, data, chunk);
+			kernel_neon_end();
+			data += chunk;
+			length -= chunk;
+		} while (length);
+	} else {
+		*crc = crc_t10dif_generic(*crc, data, length);
+	}
+
+	return 0;
+}
+
+static int crct10dif_final(struct shash_desc *desc, u8 *out)
+{
+	u16 *crc = shash_desc_ctx(desc);
+
+	*(u16 *)out = *crc;
+	return 0;
+}
+
+static struct shash_alg crc_t10dif_alg[] = {{
+	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
+	.init			= crct10dif_init,
+	.update			= crct10dif_update_pmull_p8,
+	.final			= crct10dif_final,
+	.descsize		= CRC_T10DIF_DIGEST_SIZE,
+
+	.base.cra_name		= "crct10dif",
+	.base.cra_driver_name	= "crct10dif-arm64-neon",
+	.base.cra_priority	= 100,
+	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= CRC_T10DIF_DIGEST_SIZE,
+	.init			= crct10dif_init,
+	.update			= crct10dif_update_pmull_p64,
+	.final			= crct10dif_final,
+	.descsize		= CRC_T10DIF_DIGEST_SIZE,
+
+	.base.cra_name		= "crct10dif",
+	.base.cra_driver_name	= "crct10dif-arm64-ce",
+	.base.cra_priority	= 200,
+	.base.cra_blocksize	= CRC_T10DIF_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}};
+
+static int __init crc_t10dif_mod_init(void)
+{
+	if (cpu_have_named_feature(PMULL))
+		return crypto_register_shashes(crc_t10dif_alg,
+					       ARRAY_SIZE(crc_t10dif_alg));
+	else
+		/* only register the first array element */
+		return crypto_register_shash(crc_t10dif_alg);
+}
+
+static void __exit crc_t10dif_mod_exit(void)
+{
+	if (cpu_have_named_feature(PMULL))
+		crypto_unregister_shashes(crc_t10dif_alg,
+					  ARRAY_SIZE(crc_t10dif_alg));
+	else
+		crypto_unregister_shash(crc_t10dif_alg);
+}
+
+module_cpu_feature_match(ASIMD, crc_t10dif_mod_init);
+module_exit(crc_t10dif_mod_exit);
+
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("crct10dif");
+MODULE_ALIAS_CRYPTO("crct10dif-arm64-ce");
diff --git a/arch/arm64/crypto/ghash-ce-core.S b/arch/arm64/crypto/ghash-ce-core.S
new file mode 100644
index 000000000..23ee9a5ea
--- /dev/null
+++ b/arch/arm64/crypto/ghash-ce-core.S
@@ -0,0 +1,776 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Accelerated GHASH implementation with ARMv8 PMULL instructions.
+ *
+ * Copyright (C) 2014 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+
+	SHASH		.req	v0
+	SHASH2		.req	v1
+	T1		.req	v2
+	T2		.req	v3
+	MASK		.req	v4
+	XM		.req	v5
+	XL		.req	v6
+	XH		.req	v7
+	IN1		.req	v7
+
+	k00_16		.req	v8
+	k32_48		.req	v9
+
+	t3		.req	v10
+	t4		.req	v11
+	t5		.req	v12
+	t6		.req	v13
+	t7		.req	v14
+	t8		.req	v15
+	t9		.req	v16
+
+	perm1		.req	v17
+	perm2		.req	v18
+	perm3		.req	v19
+
+	sh1		.req	v20
+	sh2		.req	v21
+	sh3		.req	v22
+	sh4		.req	v23
+
+	ss1		.req	v24
+	ss2		.req	v25
+	ss3		.req	v26
+	ss4		.req	v27
+
+	XL2		.req	v8
+	XM2		.req	v9
+	XH2		.req	v10
+	XL3		.req	v11
+	XM3		.req	v12
+	XH3		.req	v13
+	TT3		.req	v14
+	TT4		.req	v15
+	HH		.req	v16
+	HH3		.req	v17
+	HH4		.req	v18
+	HH34		.req	v19
+
+	.text
+	.arch		armv8-a+crypto
+
+	.macro		__pmull_p64, rd, rn, rm
+	pmull		\rd\().1q, \rn\().1d, \rm\().1d
+	.endm
+
+	.macro		__pmull2_p64, rd, rn, rm
+	pmull2		\rd\().1q, \rn\().2d, \rm\().2d
+	.endm
+
+	.macro		__pmull_p8, rq, ad, bd
+	ext		t3.8b, \ad\().8b, \ad\().8b, #1		// A1
+	ext		t5.8b, \ad\().8b, \ad\().8b, #2		// A2
+	ext		t7.8b, \ad\().8b, \ad\().8b, #3		// A3
+
+	__pmull_p8_\bd	\rq, \ad
+	.endm
+
+	.macro		__pmull2_p8, rq, ad, bd
+	tbl		t3.16b, {\ad\().16b}, perm1.16b		// A1
+	tbl		t5.16b, {\ad\().16b}, perm2.16b		// A2
+	tbl		t7.16b, {\ad\().16b}, perm3.16b		// A3
+
+	__pmull2_p8_\bd	\rq, \ad
+	.endm
+
+	.macro		__pmull_p8_SHASH, rq, ad
+	__pmull_p8_tail	\rq, \ad\().8b, SHASH.8b, 8b,, sh1, sh2, sh3, sh4
+	.endm
+
+	.macro		__pmull_p8_SHASH2, rq, ad
+	__pmull_p8_tail	\rq, \ad\().8b, SHASH2.8b, 8b,, ss1, ss2, ss3, ss4
+	.endm
+
+	.macro		__pmull2_p8_SHASH, rq, ad
+	__pmull_p8_tail	\rq, \ad\().16b, SHASH.16b, 16b, 2, sh1, sh2, sh3, sh4
+	.endm
+
+	.macro		__pmull_p8_tail, rq, ad, bd, nb, t, b1, b2, b3, b4
+	pmull\t		t3.8h, t3.\nb, \bd			// F = A1*B
+	pmull\t		t4.8h, \ad, \b1\().\nb			// E = A*B1
+	pmull\t		t5.8h, t5.\nb, \bd			// H = A2*B
+	pmull\t		t6.8h, \ad, \b2\().\nb			// G = A*B2
+	pmull\t		t7.8h, t7.\nb, \bd			// J = A3*B
+	pmull\t		t8.8h, \ad, \b3\().\nb			// I = A*B3
+	pmull\t		t9.8h, \ad, \b4\().\nb			// K = A*B4
+	pmull\t		\rq\().8h, \ad, \bd			// D = A*B
+
+	eor		t3.16b, t3.16b, t4.16b			// L = E + F
+	eor		t5.16b, t5.16b, t6.16b			// M = G + H
+	eor		t7.16b, t7.16b, t8.16b			// N = I + J
+
+	uzp1		t4.2d, t3.2d, t5.2d
+	uzp2		t3.2d, t3.2d, t5.2d
+	uzp1		t6.2d, t7.2d, t9.2d
+	uzp2		t7.2d, t7.2d, t9.2d
+
+	// t3 = (L) (P0 + P1) << 8
+	// t5 = (M) (P2 + P3) << 16
+	eor		t4.16b, t4.16b, t3.16b
+	and		t3.16b, t3.16b, k32_48.16b
+
+	// t7 = (N) (P4 + P5) << 24
+	// t9 = (K) (P6 + P7) << 32
+	eor		t6.16b, t6.16b, t7.16b
+	and		t7.16b, t7.16b, k00_16.16b
+
+	eor		t4.16b, t4.16b, t3.16b
+	eor		t6.16b, t6.16b, t7.16b
+
+	zip2		t5.2d, t4.2d, t3.2d
+	zip1		t3.2d, t4.2d, t3.2d
+	zip2		t9.2d, t6.2d, t7.2d
+	zip1		t7.2d, t6.2d, t7.2d
+
+	ext		t3.16b, t3.16b, t3.16b, #15
+	ext		t5.16b, t5.16b, t5.16b, #14
+	ext		t7.16b, t7.16b, t7.16b, #13
+	ext		t9.16b, t9.16b, t9.16b, #12
+
+	eor		t3.16b, t3.16b, t5.16b
+	eor		t7.16b, t7.16b, t9.16b
+	eor		\rq\().16b, \rq\().16b, t3.16b
+	eor		\rq\().16b, \rq\().16b, t7.16b
+	.endm
+
+	.macro		__pmull_pre_p64
+	add		x8, x3, #16
+	ld1		{HH.2d-HH4.2d}, [x8]
+
+	trn1		SHASH2.2d, SHASH.2d, HH.2d
+	trn2		T1.2d, SHASH.2d, HH.2d
+	eor		SHASH2.16b, SHASH2.16b, T1.16b
+
+	trn1		HH34.2d, HH3.2d, HH4.2d
+	trn2		T1.2d, HH3.2d, HH4.2d
+	eor		HH34.16b, HH34.16b, T1.16b
+
+	movi		MASK.16b, #0xe1
+	shl		MASK.2d, MASK.2d, #57
+	.endm
+
+	.macro		__pmull_pre_p8
+	ext		SHASH2.16b, SHASH.16b, SHASH.16b, #8
+	eor		SHASH2.16b, SHASH2.16b, SHASH.16b
+
+	// k00_16 := 0x0000000000000000_000000000000ffff
+	// k32_48 := 0x00000000ffffffff_0000ffffffffffff
+	movi		k32_48.2d, #0xffffffff
+	mov		k32_48.h[2], k32_48.h[0]
+	ushr		k00_16.2d, k32_48.2d, #32
+
+	// prepare the permutation vectors
+	mov_q		x5, 0x080f0e0d0c0b0a09
+	movi		T1.8b, #8
+	dup		perm1.2d, x5
+	eor		perm1.16b, perm1.16b, T1.16b
+	ushr		perm2.2d, perm1.2d, #8
+	ushr		perm3.2d, perm1.2d, #16
+	ushr		T1.2d, perm1.2d, #24
+	sli		perm2.2d, perm1.2d, #56
+	sli		perm3.2d, perm1.2d, #48
+	sli		T1.2d, perm1.2d, #40
+
+	// precompute loop invariants
+	tbl		sh1.16b, {SHASH.16b}, perm1.16b
+	tbl		sh2.16b, {SHASH.16b}, perm2.16b
+	tbl		sh3.16b, {SHASH.16b}, perm3.16b
+	tbl		sh4.16b, {SHASH.16b}, T1.16b
+	ext		ss1.8b, SHASH2.8b, SHASH2.8b, #1
+	ext		ss2.8b, SHASH2.8b, SHASH2.8b, #2
+	ext		ss3.8b, SHASH2.8b, SHASH2.8b, #3
+	ext		ss4.8b, SHASH2.8b, SHASH2.8b, #4
+	.endm
+
+	//
+	// PMULL (64x64->128) based reduction for CPUs that can do
+	// it in a single instruction.
+	//
+	.macro		__pmull_reduce_p64
+	pmull		T2.1q, XL.1d, MASK.1d
+	eor		XM.16b, XM.16b, T1.16b
+
+	mov		XH.d[0], XM.d[1]
+	mov		XM.d[1], XL.d[0]
+
+	eor		XL.16b, XM.16b, T2.16b
+	ext		T2.16b, XL.16b, XL.16b, #8
+	pmull		XL.1q, XL.1d, MASK.1d
+	.endm
+
+	//
+	// Alternative reduction for CPUs that lack support for the
+	// 64x64->128 PMULL instruction
+	//
+	.macro		__pmull_reduce_p8
+	eor		XM.16b, XM.16b, T1.16b
+
+	mov		XL.d[1], XM.d[0]
+	mov		XH.d[0], XM.d[1]
+
+	shl		T1.2d, XL.2d, #57
+	shl		T2.2d, XL.2d, #62
+	eor		T2.16b, T2.16b, T1.16b
+	shl		T1.2d, XL.2d, #63
+	eor		T2.16b, T2.16b, T1.16b
+	ext		T1.16b, XL.16b, XH.16b, #8
+	eor		T2.16b, T2.16b, T1.16b
+
+	mov		XL.d[1], T2.d[0]
+	mov		XH.d[0], T2.d[1]
+
+	ushr		T2.2d, XL.2d, #1
+	eor		XH.16b, XH.16b, XL.16b
+	eor		XL.16b, XL.16b, T2.16b
+	ushr		T2.2d, T2.2d, #6
+	ushr		XL.2d, XL.2d, #1
+	.endm
+
+	.macro		__pmull_ghash, pn
+	ld1		{SHASH.2d}, [x3]
+	ld1		{XL.2d}, [x1]
+
+	__pmull_pre_\pn
+
+	/* do the head block first, if supplied */
+	cbz		x4, 0f
+	ld1		{T1.2d}, [x4]
+	mov		x4, xzr
+	b		3f
+
+0:	.ifc		\pn, p64
+	tbnz		w0, #0, 2f		// skip until #blocks is a
+	tbnz		w0, #1, 2f		// round multiple of 4
+
+1:	ld1		{XM3.16b-TT4.16b}, [x2], #64
+
+	sub		w0, w0, #4
+
+	rev64		T1.16b, XM3.16b
+	rev64		T2.16b, XH3.16b
+	rev64		TT4.16b, TT4.16b
+	rev64		TT3.16b, TT3.16b
+
+	ext		IN1.16b, TT4.16b, TT4.16b, #8
+	ext		XL3.16b, TT3.16b, TT3.16b, #8
+
+	eor		TT4.16b, TT4.16b, IN1.16b
+	pmull2		XH2.1q, SHASH.2d, IN1.2d	// a1 * b1
+	pmull		XL2.1q, SHASH.1d, IN1.1d	// a0 * b0
+	pmull		XM2.1q, SHASH2.1d, TT4.1d	// (a1 + a0)(b1 + b0)
+
+	eor		TT3.16b, TT3.16b, XL3.16b
+	pmull2		XH3.1q, HH.2d, XL3.2d		// a1 * b1
+	pmull		XL3.1q, HH.1d, XL3.1d		// a0 * b0
+	pmull2		XM3.1q, SHASH2.2d, TT3.2d	// (a1 + a0)(b1 + b0)
+
+	ext		IN1.16b, T2.16b, T2.16b, #8
+	eor		XL2.16b, XL2.16b, XL3.16b
+	eor		XH2.16b, XH2.16b, XH3.16b
+	eor		XM2.16b, XM2.16b, XM3.16b
+
+	eor		T2.16b, T2.16b, IN1.16b
+	pmull2		XH3.1q, HH3.2d, IN1.2d		// a1 * b1
+	pmull		XL3.1q, HH3.1d, IN1.1d		// a0 * b0
+	pmull		XM3.1q, HH34.1d, T2.1d		// (a1 + a0)(b1 + b0)
+
+	eor		XL2.16b, XL2.16b, XL3.16b
+	eor		XH2.16b, XH2.16b, XH3.16b
+	eor		XM2.16b, XM2.16b, XM3.16b
+
+	ext		IN1.16b, T1.16b, T1.16b, #8
+	ext		TT3.16b, XL.16b, XL.16b, #8
+	eor		XL.16b, XL.16b, IN1.16b
+	eor		T1.16b, T1.16b, TT3.16b
+
+	pmull2		XH.1q, HH4.2d, XL.2d		// a1 * b1
+	eor		T1.16b, T1.16b, XL.16b
+	pmull		XL.1q, HH4.1d, XL.1d		// a0 * b0
+	pmull2		XM.1q, HH34.2d, T1.2d		// (a1 + a0)(b1 + b0)
+
+	eor		XL.16b, XL.16b, XL2.16b
+	eor		XH.16b, XH.16b, XH2.16b
+	eor		XM.16b, XM.16b, XM2.16b
+
+	eor		T2.16b, XL.16b, XH.16b
+	ext		T1.16b, XL.16b, XH.16b, #8
+	eor		XM.16b, XM.16b, T2.16b
+
+	__pmull_reduce_p64
+
+	eor		T2.16b, T2.16b, XH.16b
+	eor		XL.16b, XL.16b, T2.16b
+
+	cbz		w0, 5f
+	b		1b
+	.endif
+
+2:	ld1		{T1.2d}, [x2], #16
+	sub		w0, w0, #1
+
+3:	/* multiply XL by SHASH in GF(2^128) */
+CPU_LE(	rev64		T1.16b, T1.16b	)
+
+	ext		T2.16b, XL.16b, XL.16b, #8
+	ext		IN1.16b, T1.16b, T1.16b, #8
+	eor		T1.16b, T1.16b, T2.16b
+	eor		XL.16b, XL.16b, IN1.16b
+
+	__pmull2_\pn	XH, XL, SHASH			// a1 * b1
+	eor		T1.16b, T1.16b, XL.16b
+	__pmull_\pn 	XL, XL, SHASH			// a0 * b0
+	__pmull_\pn	XM, T1, SHASH2			// (a1 + a0)(b1 + b0)
+
+4:	eor		T2.16b, XL.16b, XH.16b
+	ext		T1.16b, XL.16b, XH.16b, #8
+	eor		XM.16b, XM.16b, T2.16b
+
+	__pmull_reduce_\pn
+
+	eor		T2.16b, T2.16b, XH.16b
+	eor		XL.16b, XL.16b, T2.16b
+
+	cbnz		w0, 0b
+
+5:	st1		{XL.2d}, [x1]
+	ret
+	.endm
+
+	/*
+	 * void pmull_ghash_update(int blocks, u64 dg[], const char *src,
+	 *			   struct ghash_key const *k, const char *head)
+	 */
+SYM_TYPED_FUNC_START(pmull_ghash_update_p64)
+	__pmull_ghash	p64
+SYM_FUNC_END(pmull_ghash_update_p64)
+
+SYM_TYPED_FUNC_START(pmull_ghash_update_p8)
+	__pmull_ghash	p8
+SYM_FUNC_END(pmull_ghash_update_p8)
+
+	KS0		.req	v8
+	KS1		.req	v9
+	KS2		.req	v10
+	KS3		.req	v11
+
+	INP0		.req	v21
+	INP1		.req	v22
+	INP2		.req	v23
+	INP3		.req	v24
+
+	K0		.req	v25
+	K1		.req	v26
+	K2		.req	v27
+	K3		.req	v28
+	K4		.req	v12
+	K5		.req	v13
+	K6		.req	v4
+	K7		.req	v5
+	K8		.req	v14
+	K9		.req	v15
+	KK		.req	v29
+	KL		.req	v30
+	KM		.req	v31
+
+	.macro		load_round_keys, rounds, rk, tmp
+	add		\tmp, \rk, #64
+	ld1		{K0.4s-K3.4s}, [\rk]
+	ld1		{K4.4s-K5.4s}, [\tmp]
+	add		\tmp, \rk, \rounds, lsl #4
+	sub		\tmp, \tmp, #32
+	ld1		{KK.4s-KM.4s}, [\tmp]
+	.endm
+
+	.macro		enc_round, state, key
+	aese		\state\().16b, \key\().16b
+	aesmc		\state\().16b, \state\().16b
+	.endm
+
+	.macro		enc_qround, s0, s1, s2, s3, key
+	enc_round	\s0, \key
+	enc_round	\s1, \key
+	enc_round	\s2, \key
+	enc_round	\s3, \key
+	.endm
+
+	.macro		enc_block, state, rounds, rk, tmp
+	add		\tmp, \rk, #96
+	ld1		{K6.4s-K7.4s}, [\tmp], #32
+	.irp		key, K0, K1, K2, K3, K4 K5
+	enc_round	\state, \key
+	.endr
+
+	tbnz		\rounds, #2, .Lnot128_\@
+.Lout256_\@:
+	enc_round	\state, K6
+	enc_round	\state, K7
+
+.Lout192_\@:
+	enc_round	\state, KK
+	aese		\state\().16b, KL.16b
+	eor		\state\().16b, \state\().16b, KM.16b
+
+	.subsection	1
+.Lnot128_\@:
+	ld1		{K8.4s-K9.4s}, [\tmp], #32
+	enc_round	\state, K6
+	enc_round	\state, K7
+	ld1		{K6.4s-K7.4s}, [\tmp]
+	enc_round	\state, K8
+	enc_round	\state, K9
+	tbz		\rounds, #1, .Lout192_\@
+	b		.Lout256_\@
+	.previous
+	.endm
+
+	.align		6
+	.macro		pmull_gcm_do_crypt, enc
+	frame_push	1
+
+	load_round_keys	x7, x6, x8
+
+	ld1		{SHASH.2d}, [x3], #16
+	ld1		{HH.2d-HH4.2d}, [x3]
+
+	trn1		SHASH2.2d, SHASH.2d, HH.2d
+	trn2		T1.2d, SHASH.2d, HH.2d
+	eor		SHASH2.16b, SHASH2.16b, T1.16b
+
+	trn1		HH34.2d, HH3.2d, HH4.2d
+	trn2		T1.2d, HH3.2d, HH4.2d
+	eor		HH34.16b, HH34.16b, T1.16b
+
+	ld1		{XL.2d}, [x4]
+
+	cbz		x0, 3f				// tag only?
+
+	ldr		w8, [x5, #12]			// load lower counter
+CPU_LE(	rev		w8, w8		)
+
+0:	mov		w9, #4				// max blocks per round
+	add		x10, x0, #0xf
+	lsr		x10, x10, #4			// remaining blocks
+
+	subs		x0, x0, #64
+	csel		w9, w10, w9, mi
+	add		w8, w8, w9
+
+	bmi		1f
+	ld1		{INP0.16b-INP3.16b}, [x2], #64
+	.subsection	1
+	/*
+	 * Populate the four input registers right to left with up to 63 bytes
+	 * of data, using overlapping loads to avoid branches.
+	 *
+	 *                INP0     INP1     INP2     INP3
+	 *  1 byte     |        |        |        |x       |
+	 * 16 bytes    |        |        |        |xxxxxxxx|
+	 * 17 bytes    |        |        |xxxxxxxx|x       |
+	 * 47 bytes    |        |xxxxxxxx|xxxxxxxx|xxxxxxx |
+	 * etc etc
+	 *
+	 * Note that this code may read up to 15 bytes before the start of
+	 * the input. It is up to the calling code to ensure this is safe if
+	 * this happens in the first iteration of the loop (i.e., when the
+	 * input size is < 16 bytes)
+	 */
+1:	mov		x15, #16
+	ands		x19, x0, #0xf
+	csel		x19, x19, x15, ne
+	adr_l		x17, .Lpermute_table + 16
+
+	sub		x11, x15, x19
+	add		x12, x17, x11
+	sub		x17, x17, x11
+	ld1		{T1.16b}, [x12]
+	sub		x10, x1, x11
+	sub		x11, x2, x11
+
+	cmp		x0, #-16
+	csel		x14, x15, xzr, gt
+	cmp		x0, #-32
+	csel		x15, x15, xzr, gt
+	cmp		x0, #-48
+	csel		x16, x19, xzr, gt
+	csel		x1, x1, x10, gt
+	csel		x2, x2, x11, gt
+
+	ld1		{INP0.16b}, [x2], x14
+	ld1		{INP1.16b}, [x2], x15
+	ld1		{INP2.16b}, [x2], x16
+	ld1		{INP3.16b}, [x2]
+	tbl		INP3.16b, {INP3.16b}, T1.16b
+	b		2f
+	.previous
+
+2:	.if		\enc == 0
+	bl		pmull_gcm_ghash_4x
+	.endif
+
+	bl		pmull_gcm_enc_4x
+
+	tbnz		x0, #63, 6f
+	st1		{INP0.16b-INP3.16b}, [x1], #64
+	.if		\enc == 1
+	bl		pmull_gcm_ghash_4x
+	.endif
+	bne		0b
+
+3:	ldr		x10, [sp, #.Lframe_local_offset]
+	cbz		x10, 5f				// output tag?
+
+	ld1		{INP3.16b}, [x10]		// load lengths[]
+	mov		w9, #1
+	bl		pmull_gcm_ghash_4x
+
+	mov		w11, #(0x1 << 24)		// BE '1U'
+	ld1		{KS0.16b}, [x5]
+	mov		KS0.s[3], w11
+
+	enc_block	KS0, x7, x6, x12
+
+	ext		XL.16b, XL.16b, XL.16b, #8
+	rev64		XL.16b, XL.16b
+	eor		XL.16b, XL.16b, KS0.16b
+
+	.if		\enc == 1
+	st1		{XL.16b}, [x10]			// store tag
+	.else
+	ldp		x11, x12, [sp, #40]		// load tag pointer and authsize
+	adr_l		x17, .Lpermute_table
+	ld1		{KS0.16b}, [x11]		// load supplied tag
+	add		x17, x17, x12
+	ld1		{KS1.16b}, [x17]		// load permute vector
+
+	cmeq		XL.16b, XL.16b, KS0.16b		// compare tags
+	mvn		XL.16b, XL.16b			// -1 for fail, 0 for pass
+	tbl		XL.16b, {XL.16b}, KS1.16b	// keep authsize bytes only
+	sminv		b0, XL.16b			// signed minimum across XL
+	smov		w0, v0.b[0]			// return b0
+	.endif
+
+4:	frame_pop
+	ret
+
+5:
+CPU_LE(	rev		w8, w8		)
+	str		w8, [x5, #12]			// store lower counter
+	st1		{XL.2d}, [x4]
+	b		4b
+
+6:	ld1		{T1.16b-T2.16b}, [x17], #32	// permute vectors
+	sub		x17, x17, x19, lsl #1
+
+	cmp		w9, #1
+	beq		7f
+	.subsection	1
+7:	ld1		{INP2.16b}, [x1]
+	tbx		INP2.16b, {INP3.16b}, T1.16b
+	mov		INP3.16b, INP2.16b
+	b		8f
+	.previous
+
+	st1		{INP0.16b}, [x1], x14
+	st1		{INP1.16b}, [x1], x15
+	st1		{INP2.16b}, [x1], x16
+	tbl		INP3.16b, {INP3.16b}, T1.16b
+	tbx		INP3.16b, {INP2.16b}, T2.16b
+8:	st1		{INP3.16b}, [x1]
+
+	.if		\enc == 1
+	ld1		{T1.16b}, [x17]
+	tbl		INP3.16b, {INP3.16b}, T1.16b	// clear non-data bits
+	bl		pmull_gcm_ghash_4x
+	.endif
+	b		3b
+	.endm
+
+	/*
+	 * void pmull_gcm_encrypt(int blocks, u8 dst[], const u8 src[],
+	 *			  struct ghash_key const *k, u64 dg[], u8 ctr[],
+	 *			  int rounds, u8 tag)
+	 */
+SYM_FUNC_START(pmull_gcm_encrypt)
+	pmull_gcm_do_crypt	1
+SYM_FUNC_END(pmull_gcm_encrypt)
+
+	/*
+	 * void pmull_gcm_decrypt(int blocks, u8 dst[], const u8 src[],
+	 *			  struct ghash_key const *k, u64 dg[], u8 ctr[],
+	 *			  int rounds, u8 tag)
+	 */
+SYM_FUNC_START(pmull_gcm_decrypt)
+	pmull_gcm_do_crypt	0
+SYM_FUNC_END(pmull_gcm_decrypt)
+
+SYM_FUNC_START_LOCAL(pmull_gcm_ghash_4x)
+	movi		MASK.16b, #0xe1
+	shl		MASK.2d, MASK.2d, #57
+
+	rev64		T1.16b, INP0.16b
+	rev64		T2.16b, INP1.16b
+	rev64		TT3.16b, INP2.16b
+	rev64		TT4.16b, INP3.16b
+
+	ext		XL.16b, XL.16b, XL.16b, #8
+
+	tbz		w9, #2, 0f			// <4 blocks?
+	.subsection	1
+0:	movi		XH2.16b, #0
+	movi		XM2.16b, #0
+	movi		XL2.16b, #0
+
+	tbz		w9, #0, 1f			// 2 blocks?
+	tbz		w9, #1, 2f			// 1 block?
+
+	eor		T2.16b, T2.16b, XL.16b
+	ext		T1.16b, T2.16b, T2.16b, #8
+	b		.Lgh3
+
+1:	eor		TT3.16b, TT3.16b, XL.16b
+	ext		T2.16b, TT3.16b, TT3.16b, #8
+	b		.Lgh2
+
+2:	eor		TT4.16b, TT4.16b, XL.16b
+	ext		IN1.16b, TT4.16b, TT4.16b, #8
+	b		.Lgh1
+	.previous
+
+	eor		T1.16b, T1.16b, XL.16b
+	ext		IN1.16b, T1.16b, T1.16b, #8
+
+	pmull2		XH2.1q, HH4.2d, IN1.2d		// a1 * b1
+	eor		T1.16b, T1.16b, IN1.16b
+	pmull		XL2.1q, HH4.1d, IN1.1d		// a0 * b0
+	pmull2		XM2.1q, HH34.2d, T1.2d		// (a1 + a0)(b1 + b0)
+
+	ext		T1.16b, T2.16b, T2.16b, #8
+.Lgh3:	eor		T2.16b, T2.16b, T1.16b
+	pmull2		XH.1q, HH3.2d, T1.2d		// a1 * b1
+	pmull		XL.1q, HH3.1d, T1.1d		// a0 * b0
+	pmull		XM.1q, HH34.1d, T2.1d		// (a1 + a0)(b1 + b0)
+
+	eor		XH2.16b, XH2.16b, XH.16b
+	eor		XL2.16b, XL2.16b, XL.16b
+	eor		XM2.16b, XM2.16b, XM.16b
+
+	ext		T2.16b, TT3.16b, TT3.16b, #8
+.Lgh2:	eor		TT3.16b, TT3.16b, T2.16b
+	pmull2		XH.1q, HH.2d, T2.2d		// a1 * b1
+	pmull		XL.1q, HH.1d, T2.1d		// a0 * b0
+	pmull2		XM.1q, SHASH2.2d, TT3.2d	// (a1 + a0)(b1 + b0)
+
+	eor		XH2.16b, XH2.16b, XH.16b
+	eor		XL2.16b, XL2.16b, XL.16b
+	eor		XM2.16b, XM2.16b, XM.16b
+
+	ext		IN1.16b, TT4.16b, TT4.16b, #8
+.Lgh1:	eor		TT4.16b, TT4.16b, IN1.16b
+	pmull		XL.1q, SHASH.1d, IN1.1d		// a0 * b0
+	pmull2		XH.1q, SHASH.2d, IN1.2d		// a1 * b1
+	pmull		XM.1q, SHASH2.1d, TT4.1d	// (a1 + a0)(b1 + b0)
+
+	eor		XH.16b, XH.16b, XH2.16b
+	eor		XL.16b, XL.16b, XL2.16b
+	eor		XM.16b, XM.16b, XM2.16b
+
+	eor		T2.16b, XL.16b, XH.16b
+	ext		T1.16b, XL.16b, XH.16b, #8
+	eor		XM.16b, XM.16b, T2.16b
+
+	__pmull_reduce_p64
+
+	eor		T2.16b, T2.16b, XH.16b
+	eor		XL.16b, XL.16b, T2.16b
+
+	ret
+SYM_FUNC_END(pmull_gcm_ghash_4x)
+
+SYM_FUNC_START_LOCAL(pmull_gcm_enc_4x)
+	ld1		{KS0.16b}, [x5]			// load upper counter
+	sub		w10, w8, #4
+	sub		w11, w8, #3
+	sub		w12, w8, #2
+	sub		w13, w8, #1
+	rev		w10, w10
+	rev		w11, w11
+	rev		w12, w12
+	rev		w13, w13
+	mov		KS1.16b, KS0.16b
+	mov		KS2.16b, KS0.16b
+	mov		KS3.16b, KS0.16b
+	ins		KS0.s[3], w10			// set lower counter
+	ins		KS1.s[3], w11
+	ins		KS2.s[3], w12
+	ins		KS3.s[3], w13
+
+	add		x10, x6, #96			// round key pointer
+	ld1		{K6.4s-K7.4s}, [x10], #32
+	.irp		key, K0, K1, K2, K3, K4, K5
+	enc_qround	KS0, KS1, KS2, KS3, \key
+	.endr
+
+	tbnz		x7, #2, .Lnot128
+	.subsection	1
+.Lnot128:
+	ld1		{K8.4s-K9.4s}, [x10], #32
+	.irp		key, K6, K7
+	enc_qround	KS0, KS1, KS2, KS3, \key
+	.endr
+	ld1		{K6.4s-K7.4s}, [x10]
+	.irp		key, K8, K9
+	enc_qround	KS0, KS1, KS2, KS3, \key
+	.endr
+	tbz		x7, #1, .Lout192
+	b		.Lout256
+	.previous
+
+.Lout256:
+	.irp		key, K6, K7
+	enc_qround	KS0, KS1, KS2, KS3, \key
+	.endr
+
+.Lout192:
+	enc_qround	KS0, KS1, KS2, KS3, KK
+
+	aese		KS0.16b, KL.16b
+	aese		KS1.16b, KL.16b
+	aese		KS2.16b, KL.16b
+	aese		KS3.16b, KL.16b
+
+	eor		KS0.16b, KS0.16b, KM.16b
+	eor		KS1.16b, KS1.16b, KM.16b
+	eor		KS2.16b, KS2.16b, KM.16b
+	eor		KS3.16b, KS3.16b, KM.16b
+
+	eor		INP0.16b, INP0.16b, KS0.16b
+	eor		INP1.16b, INP1.16b, KS1.16b
+	eor		INP2.16b, INP2.16b, KS2.16b
+	eor		INP3.16b, INP3.16b, KS3.16b
+
+	ret
+SYM_FUNC_END(pmull_gcm_enc_4x)
+
+	.section	".rodata", "a"
+	.align		6
+.Lpermute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe,  0xf
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe,  0xf
+	.previous
diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c
new file mode 100644
index 000000000..97331b454
--- /dev/null
+++ b/arch/arm64/crypto/ghash-ce-glue.c
@@ -0,0 +1,586 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Accelerated GHASH implementation with ARMv8 PMULL instructions.
+ *
+ * Copyright (C) 2014 - 2018 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/aes.h>
+#include <crypto/gcm.h>
+#include <crypto/algapi.h>
+#include <crypto/b128ops.h>
+#include <crypto/gf128mul.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/scatterwalk.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("GHASH and AES-GCM using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("ghash");
+
+#define GHASH_BLOCK_SIZE	16
+#define GHASH_DIGEST_SIZE	16
+
+#define RFC4106_NONCE_SIZE	4
+
+struct ghash_key {
+	be128			k;
+	u64			h[][2];
+};
+
+struct ghash_desc_ctx {
+	u64 digest[GHASH_DIGEST_SIZE/sizeof(u64)];
+	u8 buf[GHASH_BLOCK_SIZE];
+	u32 count;
+};
+
+struct gcm_aes_ctx {
+	struct crypto_aes_ctx	aes_key;
+	u8			nonce[RFC4106_NONCE_SIZE];
+	struct ghash_key	ghash_key;
+};
+
+asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src,
+				       u64 const h[][2], const char *head);
+
+asmlinkage void pmull_ghash_update_p8(int blocks, u64 dg[], const char *src,
+				      u64 const h[][2], const char *head);
+
+asmlinkage void pmull_gcm_encrypt(int bytes, u8 dst[], const u8 src[],
+				  u64 const h[][2], u64 dg[], u8 ctr[],
+				  u32 const rk[], int rounds, u8 tag[]);
+asmlinkage int pmull_gcm_decrypt(int bytes, u8 dst[], const u8 src[],
+				 u64 const h[][2], u64 dg[], u8 ctr[],
+				 u32 const rk[], int rounds, const u8 l[],
+				 const u8 tag[], u64 authsize);
+
+static int ghash_init(struct shash_desc *desc)
+{
+	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	*ctx = (struct ghash_desc_ctx){};
+	return 0;
+}
+
+static void ghash_do_update(int blocks, u64 dg[], const char *src,
+			    struct ghash_key *key, const char *head)
+{
+	be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
+
+	do {
+		const u8 *in = src;
+
+		if (head) {
+			in = head;
+			blocks++;
+			head = NULL;
+		} else {
+			src += GHASH_BLOCK_SIZE;
+		}
+
+		crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
+		gf128mul_lle(&dst, &key->k);
+	} while (--blocks);
+
+	dg[0] = be64_to_cpu(dst.b);
+	dg[1] = be64_to_cpu(dst.a);
+}
+
+static __always_inline
+void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
+			  struct ghash_key *key, const char *head,
+			  void (*simd_update)(int blocks, u64 dg[],
+					      const char *src,
+					      u64 const h[][2],
+					      const char *head))
+{
+	if (likely(crypto_simd_usable())) {
+		kernel_neon_begin();
+		simd_update(blocks, dg, src, key->h, head);
+		kernel_neon_end();
+	} else {
+		ghash_do_update(blocks, dg, src, key, head);
+	}
+}
+
+/* avoid hogging the CPU for too long */
+#define MAX_BLOCKS	(SZ_64K / GHASH_BLOCK_SIZE)
+
+static int ghash_update(struct shash_desc *desc, const u8 *src,
+			unsigned int len)
+{
+	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+
+	ctx->count += len;
+
+	if ((partial + len) >= GHASH_BLOCK_SIZE) {
+		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+		int blocks;
+
+		if (partial) {
+			int p = GHASH_BLOCK_SIZE - partial;
+
+			memcpy(ctx->buf + partial, src, p);
+			src += p;
+			len -= p;
+		}
+
+		blocks = len / GHASH_BLOCK_SIZE;
+		len %= GHASH_BLOCK_SIZE;
+
+		do {
+			int chunk = min(blocks, MAX_BLOCKS);
+
+			ghash_do_simd_update(chunk, ctx->digest, src, key,
+					     partial ? ctx->buf : NULL,
+					     pmull_ghash_update_p8);
+
+			blocks -= chunk;
+			src += chunk * GHASH_BLOCK_SIZE;
+			partial = 0;
+		} while (unlikely(blocks > 0));
+	}
+	if (len)
+		memcpy(ctx->buf + partial, src, len);
+	return 0;
+}
+
+static int ghash_final(struct shash_desc *desc, u8 *dst)
+{
+	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
+
+	if (partial) {
+		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
+
+		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
+
+		ghash_do_simd_update(1, ctx->digest, ctx->buf, key, NULL,
+				     pmull_ghash_update_p8);
+	}
+	put_unaligned_be64(ctx->digest[1], dst);
+	put_unaligned_be64(ctx->digest[0], dst + 8);
+
+	memzero_explicit(ctx, sizeof(*ctx));
+	return 0;
+}
+
+static void ghash_reflect(u64 h[], const be128 *k)
+{
+	u64 carry = be64_to_cpu(k->a) & BIT(63) ? 1 : 0;
+
+	h[0] = (be64_to_cpu(k->b) << 1) | carry;
+	h[1] = (be64_to_cpu(k->a) << 1) | (be64_to_cpu(k->b) >> 63);
+
+	if (carry)
+		h[1] ^= 0xc200000000000000UL;
+}
+
+static int ghash_setkey(struct crypto_shash *tfm,
+			const u8 *inkey, unsigned int keylen)
+{
+	struct ghash_key *key = crypto_shash_ctx(tfm);
+
+	if (keylen != GHASH_BLOCK_SIZE)
+		return -EINVAL;
+
+	/* needed for the fallback */
+	memcpy(&key->k, inkey, GHASH_BLOCK_SIZE);
+
+	ghash_reflect(key->h[0], &key->k);
+	return 0;
+}
+
+static struct shash_alg ghash_alg = {
+	.base.cra_name		= "ghash",
+	.base.cra_driver_name	= "ghash-neon",
+	.base.cra_priority	= 150,
+	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
+	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
+	.base.cra_module	= THIS_MODULE,
+
+	.digestsize		= GHASH_DIGEST_SIZE,
+	.init			= ghash_init,
+	.update			= ghash_update,
+	.final			= ghash_final,
+	.setkey			= ghash_setkey,
+	.descsize		= sizeof(struct ghash_desc_ctx),
+};
+
+static int num_rounds(struct crypto_aes_ctx *ctx)
+{
+	/*
+	 * # of rounds specified by AES:
+	 * 128 bit key		10 rounds
+	 * 192 bit key		12 rounds
+	 * 256 bit key		14 rounds
+	 * => n byte key	=> 6 + (n/4) rounds
+	 */
+	return 6 + ctx->key_length / 4;
+}
+
+static int gcm_aes_setkey(struct crypto_aead *tfm, const u8 *inkey,
+			  unsigned int keylen)
+{
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(tfm);
+	u8 key[GHASH_BLOCK_SIZE];
+	be128 h;
+	int ret;
+
+	ret = aes_expandkey(&ctx->aes_key, inkey, keylen);
+	if (ret)
+		return -EINVAL;
+
+	aes_encrypt(&ctx->aes_key, key, (u8[AES_BLOCK_SIZE]){});
+
+	/* needed for the fallback */
+	memcpy(&ctx->ghash_key.k, key, GHASH_BLOCK_SIZE);
+
+	ghash_reflect(ctx->ghash_key.h[0], &ctx->ghash_key.k);
+
+	h = ctx->ghash_key.k;
+	gf128mul_lle(&h, &ctx->ghash_key.k);
+	ghash_reflect(ctx->ghash_key.h[1], &h);
+
+	gf128mul_lle(&h, &ctx->ghash_key.k);
+	ghash_reflect(ctx->ghash_key.h[2], &h);
+
+	gf128mul_lle(&h, &ctx->ghash_key.k);
+	ghash_reflect(ctx->ghash_key.h[3], &h);
+
+	return 0;
+}
+
+static int gcm_aes_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	return crypto_gcm_check_authsize(authsize);
+}
+
+static void gcm_update_mac(u64 dg[], const u8 *src, int count, u8 buf[],
+			   int *buf_count, struct gcm_aes_ctx *ctx)
+{
+	if (*buf_count > 0) {
+		int buf_added = min(count, GHASH_BLOCK_SIZE - *buf_count);
+
+		memcpy(&buf[*buf_count], src, buf_added);
+
+		*buf_count += buf_added;
+		src += buf_added;
+		count -= buf_added;
+	}
+
+	if (count >= GHASH_BLOCK_SIZE || *buf_count == GHASH_BLOCK_SIZE) {
+		int blocks = count / GHASH_BLOCK_SIZE;
+
+		ghash_do_simd_update(blocks, dg, src, &ctx->ghash_key,
+				     *buf_count ? buf : NULL,
+				     pmull_ghash_update_p64);
+
+		src += blocks * GHASH_BLOCK_SIZE;
+		count %= GHASH_BLOCK_SIZE;
+		*buf_count = 0;
+	}
+
+	if (count > 0) {
+		memcpy(buf, src, count);
+		*buf_count = count;
+	}
+}
+
+static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[], u32 len)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead);
+	u8 buf[GHASH_BLOCK_SIZE];
+	struct scatter_walk walk;
+	int buf_count = 0;
+
+	scatterwalk_start(&walk, req->src);
+
+	do {
+		u32 n = scatterwalk_clamp(&walk, len);
+		u8 *p;
+
+		if (!n) {
+			scatterwalk_start(&walk, sg_next(walk.sg));
+			n = scatterwalk_clamp(&walk, len);
+		}
+		p = scatterwalk_map(&walk);
+
+		gcm_update_mac(dg, p, n, buf, &buf_count, ctx);
+		len -= n;
+
+		scatterwalk_unmap(p);
+		scatterwalk_advance(&walk, n);
+		scatterwalk_done(&walk, 0, len);
+	} while (len);
+
+	if (buf_count) {
+		memset(&buf[buf_count], 0, GHASH_BLOCK_SIZE - buf_count);
+		ghash_do_simd_update(1, dg, buf, &ctx->ghash_key, NULL,
+				     pmull_ghash_update_p64);
+	}
+}
+
+static int gcm_encrypt(struct aead_request *req, char *iv, int assoclen)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead);
+	int nrounds = num_rounds(&ctx->aes_key);
+	struct skcipher_walk walk;
+	u8 buf[AES_BLOCK_SIZE];
+	u64 dg[2] = {};
+	be128 lengths;
+	u8 *tag;
+	int err;
+
+	lengths.a = cpu_to_be64(assoclen * 8);
+	lengths.b = cpu_to_be64(req->cryptlen * 8);
+
+	if (assoclen)
+		gcm_calculate_auth_mac(req, dg, assoclen);
+
+	put_unaligned_be32(2, iv + GCM_AES_IV_SIZE);
+
+	err = skcipher_walk_aead_encrypt(&walk, req, false);
+
+	do {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		int nbytes = walk.nbytes;
+
+		tag = (u8 *)&lengths;
+
+		if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE)) {
+			src = dst = memcpy(buf + sizeof(buf) - nbytes,
+					   src, nbytes);
+		} else if (nbytes < walk.total) {
+			nbytes &= ~(AES_BLOCK_SIZE - 1);
+			tag = NULL;
+		}
+
+		kernel_neon_begin();
+		pmull_gcm_encrypt(nbytes, dst, src, ctx->ghash_key.h,
+				  dg, iv, ctx->aes_key.key_enc, nrounds,
+				  tag);
+		kernel_neon_end();
+
+		if (unlikely(!nbytes))
+			break;
+
+		if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - nbytes, nbytes);
+
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	} while (walk.nbytes);
+
+	if (err)
+		return err;
+
+	/* copy authtag to end of dst */
+	scatterwalk_map_and_copy(tag, req->dst, req->assoclen + req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return 0;
+}
+
+static int gcm_decrypt(struct aead_request *req, char *iv, int assoclen)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead);
+	unsigned int authsize = crypto_aead_authsize(aead);
+	int nrounds = num_rounds(&ctx->aes_key);
+	struct skcipher_walk walk;
+	u8 otag[AES_BLOCK_SIZE];
+	u8 buf[AES_BLOCK_SIZE];
+	u64 dg[2] = {};
+	be128 lengths;
+	u8 *tag;
+	int ret;
+	int err;
+
+	lengths.a = cpu_to_be64(assoclen * 8);
+	lengths.b = cpu_to_be64((req->cryptlen - authsize) * 8);
+
+	if (assoclen)
+		gcm_calculate_auth_mac(req, dg, assoclen);
+
+	put_unaligned_be32(2, iv + GCM_AES_IV_SIZE);
+
+	scatterwalk_map_and_copy(otag, req->src,
+				 req->assoclen + req->cryptlen - authsize,
+				 authsize, 0);
+
+	err = skcipher_walk_aead_decrypt(&walk, req, false);
+
+	do {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		int nbytes = walk.nbytes;
+
+		tag = (u8 *)&lengths;
+
+		if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE)) {
+			src = dst = memcpy(buf + sizeof(buf) - nbytes,
+					   src, nbytes);
+		} else if (nbytes < walk.total) {
+			nbytes &= ~(AES_BLOCK_SIZE - 1);
+			tag = NULL;
+		}
+
+		kernel_neon_begin();
+		ret = pmull_gcm_decrypt(nbytes, dst, src, ctx->ghash_key.h,
+					dg, iv, ctx->aes_key.key_enc,
+					nrounds, tag, otag, authsize);
+		kernel_neon_end();
+
+		if (unlikely(!nbytes))
+			break;
+
+		if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - nbytes, nbytes);
+
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+	} while (walk.nbytes);
+
+	if (err)
+		return err;
+
+	return ret ? -EBADMSG : 0;
+}
+
+static int gcm_aes_encrypt(struct aead_request *req)
+{
+	u8 iv[AES_BLOCK_SIZE];
+
+	memcpy(iv, req->iv, GCM_AES_IV_SIZE);
+	return gcm_encrypt(req, iv, req->assoclen);
+}
+
+static int gcm_aes_decrypt(struct aead_request *req)
+{
+	u8 iv[AES_BLOCK_SIZE];
+
+	memcpy(iv, req->iv, GCM_AES_IV_SIZE);
+	return gcm_decrypt(req, iv, req->assoclen);
+}
+
+static int rfc4106_setkey(struct crypto_aead *tfm, const u8 *inkey,
+			  unsigned int keylen)
+{
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(tfm);
+	int err;
+
+	keylen -= RFC4106_NONCE_SIZE;
+	err = gcm_aes_setkey(tfm, inkey, keylen);
+	if (err)
+		return err;
+
+	memcpy(ctx->nonce, inkey + keylen, RFC4106_NONCE_SIZE);
+	return 0;
+}
+
+static int rfc4106_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	return crypto_rfc4106_check_authsize(authsize);
+}
+
+static int rfc4106_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead);
+	u8 iv[AES_BLOCK_SIZE];
+
+	memcpy(iv, ctx->nonce, RFC4106_NONCE_SIZE);
+	memcpy(iv + RFC4106_NONCE_SIZE, req->iv, GCM_RFC4106_IV_SIZE);
+
+	return crypto_ipsec_check_assoclen(req->assoclen) ?:
+	       gcm_encrypt(req, iv, req->assoclen - GCM_RFC4106_IV_SIZE);
+}
+
+static int rfc4106_decrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead);
+	u8 iv[AES_BLOCK_SIZE];
+
+	memcpy(iv, ctx->nonce, RFC4106_NONCE_SIZE);
+	memcpy(iv + RFC4106_NONCE_SIZE, req->iv, GCM_RFC4106_IV_SIZE);
+
+	return crypto_ipsec_check_assoclen(req->assoclen) ?:
+	       gcm_decrypt(req, iv, req->assoclen - GCM_RFC4106_IV_SIZE);
+}
+
+static struct aead_alg gcm_aes_algs[] = {{
+	.ivsize			= GCM_AES_IV_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.maxauthsize		= AES_BLOCK_SIZE,
+	.setkey			= gcm_aes_setkey,
+	.setauthsize		= gcm_aes_setauthsize,
+	.encrypt		= gcm_aes_encrypt,
+	.decrypt		= gcm_aes_decrypt,
+
+	.base.cra_name		= "gcm(aes)",
+	.base.cra_driver_name	= "gcm-aes-ce",
+	.base.cra_priority	= 300,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct gcm_aes_ctx) +
+				  4 * sizeof(u64[2]),
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.ivsize			= GCM_RFC4106_IV_SIZE,
+	.chunksize		= AES_BLOCK_SIZE,
+	.maxauthsize		= AES_BLOCK_SIZE,
+	.setkey			= rfc4106_setkey,
+	.setauthsize		= rfc4106_setauthsize,
+	.encrypt		= rfc4106_encrypt,
+	.decrypt		= rfc4106_decrypt,
+
+	.base.cra_name		= "rfc4106(gcm(aes))",
+	.base.cra_driver_name	= "rfc4106-gcm-aes-ce",
+	.base.cra_priority	= 300,
+	.base.cra_blocksize	= 1,
+	.base.cra_ctxsize	= sizeof(struct gcm_aes_ctx) +
+				  4 * sizeof(u64[2]),
+	.base.cra_module	= THIS_MODULE,
+}};
+
+static int __init ghash_ce_mod_init(void)
+{
+	if (!cpu_have_named_feature(ASIMD))
+		return -ENODEV;
+
+	if (cpu_have_named_feature(PMULL))
+		return crypto_register_aeads(gcm_aes_algs,
+					     ARRAY_SIZE(gcm_aes_algs));
+
+	return crypto_register_shash(&ghash_alg);
+}
+
+static void __exit ghash_ce_mod_exit(void)
+{
+	if (cpu_have_named_feature(PMULL))
+		crypto_unregister_aeads(gcm_aes_algs, ARRAY_SIZE(gcm_aes_algs));
+	else
+		crypto_unregister_shash(&ghash_alg);
+}
+
+static const struct cpu_feature __maybe_unused ghash_cpu_feature[] = {
+	{ cpu_feature(PMULL) }, { }
+};
+MODULE_DEVICE_TABLE(cpu, ghash_cpu_feature);
+
+module_init(ghash_ce_mod_init);
+module_exit(ghash_ce_mod_exit);
diff --git a/arch/arm64/crypto/nh-neon-core.S b/arch/arm64/crypto/nh-neon-core.S
new file mode 100644
index 000000000..13eda08fd
--- /dev/null
+++ b/arch/arm64/crypto/nh-neon-core.S
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * NH - ε-almost-universal hash function, ARM64 NEON accelerated version
+ *
+ * Copyright 2018 Google LLC
+ *
+ * Author: Eric Biggers <ebiggers@google.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+
+	KEY		.req	x0
+	MESSAGE		.req	x1
+	MESSAGE_LEN	.req	x2
+	HASH		.req	x3
+
+	PASS0_SUMS	.req	v0
+	PASS1_SUMS	.req	v1
+	PASS2_SUMS	.req	v2
+	PASS3_SUMS	.req	v3
+	K0		.req	v4
+	K1		.req	v5
+	K2		.req	v6
+	K3		.req	v7
+	T0		.req	v8
+	T1		.req	v9
+	T2		.req	v10
+	T3		.req	v11
+	T4		.req	v12
+	T5		.req	v13
+	T6		.req	v14
+	T7		.req	v15
+
+.macro _nh_stride	k0, k1, k2, k3
+
+	// Load next message stride
+	ld1		{T3.16b}, [MESSAGE], #16
+
+	// Load next key stride
+	ld1		{\k3\().4s}, [KEY], #16
+
+	// Add message words to key words
+	add		T0.4s, T3.4s, \k0\().4s
+	add		T1.4s, T3.4s, \k1\().4s
+	add		T2.4s, T3.4s, \k2\().4s
+	add		T3.4s, T3.4s, \k3\().4s
+
+	// Multiply 32x32 => 64 and accumulate
+	mov		T4.d[0], T0.d[1]
+	mov		T5.d[0], T1.d[1]
+	mov		T6.d[0], T2.d[1]
+	mov		T7.d[0], T3.d[1]
+	umlal		PASS0_SUMS.2d, T0.2s, T4.2s
+	umlal		PASS1_SUMS.2d, T1.2s, T5.2s
+	umlal		PASS2_SUMS.2d, T2.2s, T6.2s
+	umlal		PASS3_SUMS.2d, T3.2s, T7.2s
+.endm
+
+/*
+ * void nh_neon(const u32 *key, const u8 *message, size_t message_len,
+ *		__le64 hash[NH_NUM_PASSES])
+ *
+ * It's guaranteed that message_len % 16 == 0.
+ */
+SYM_TYPED_FUNC_START(nh_neon)
+
+	ld1		{K0.4s,K1.4s}, [KEY], #32
+	  movi		PASS0_SUMS.2d, #0
+	  movi		PASS1_SUMS.2d, #0
+	ld1		{K2.4s}, [KEY], #16
+	  movi		PASS2_SUMS.2d, #0
+	  movi		PASS3_SUMS.2d, #0
+
+	subs		MESSAGE_LEN, MESSAGE_LEN, #64
+	blt		.Lloop4_done
+.Lloop4:
+	_nh_stride	K0, K1, K2, K3
+	_nh_stride	K1, K2, K3, K0
+	_nh_stride	K2, K3, K0, K1
+	_nh_stride	K3, K0, K1, K2
+	subs		MESSAGE_LEN, MESSAGE_LEN, #64
+	bge		.Lloop4
+
+.Lloop4_done:
+	ands		MESSAGE_LEN, MESSAGE_LEN, #63
+	beq		.Ldone
+	_nh_stride	K0, K1, K2, K3
+
+	subs		MESSAGE_LEN, MESSAGE_LEN, #16
+	beq		.Ldone
+	_nh_stride	K1, K2, K3, K0
+
+	subs		MESSAGE_LEN, MESSAGE_LEN, #16
+	beq		.Ldone
+	_nh_stride	K2, K3, K0, K1
+
+.Ldone:
+	// Sum the accumulators for each pass, then store the sums to 'hash'
+	addp		T0.2d, PASS0_SUMS.2d, PASS1_SUMS.2d
+	addp		T1.2d, PASS2_SUMS.2d, PASS3_SUMS.2d
+	st1		{T0.16b,T1.16b}, [HASH]
+	ret
+SYM_FUNC_END(nh_neon)
diff --git a/arch/arm64/crypto/nhpoly1305-neon-glue.c b/arch/arm64/crypto/nhpoly1305-neon-glue.c
new file mode 100644
index 000000000..cd882c35d
--- /dev/null
+++ b/arch/arm64/crypto/nhpoly1305-neon-glue.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NHPoly1305 - ε-almost-∆-universal hash function for Adiantum
+ * (ARM64 NEON accelerated version)
+ *
+ * Copyright 2018 Google LLC
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/nhpoly1305.h>
+#include <linux/module.h>
+
+asmlinkage void nh_neon(const u32 *key, const u8 *message, size_t message_len,
+			__le64 hash[NH_NUM_PASSES]);
+
+static int nhpoly1305_neon_update(struct shash_desc *desc,
+				  const u8 *src, unsigned int srclen)
+{
+	if (srclen < 64 || !crypto_simd_usable())
+		return crypto_nhpoly1305_update(desc, src, srclen);
+
+	do {
+		unsigned int n = min_t(unsigned int, srclen, SZ_4K);
+
+		kernel_neon_begin();
+		crypto_nhpoly1305_update_helper(desc, src, n, nh_neon);
+		kernel_neon_end();
+		src += n;
+		srclen -= n;
+	} while (srclen);
+	return 0;
+}
+
+static struct shash_alg nhpoly1305_alg = {
+	.base.cra_name		= "nhpoly1305",
+	.base.cra_driver_name	= "nhpoly1305-neon",
+	.base.cra_priority	= 200,
+	.base.cra_ctxsize	= sizeof(struct nhpoly1305_key),
+	.base.cra_module	= THIS_MODULE,
+	.digestsize		= POLY1305_DIGEST_SIZE,
+	.init			= crypto_nhpoly1305_init,
+	.update			= nhpoly1305_neon_update,
+	.final			= crypto_nhpoly1305_final,
+	.setkey			= crypto_nhpoly1305_setkey,
+	.descsize		= sizeof(struct nhpoly1305_state),
+};
+
+static int __init nhpoly1305_mod_init(void)
+{
+	if (!cpu_have_named_feature(ASIMD))
+		return -ENODEV;
+
+	return crypto_register_shash(&nhpoly1305_alg);
+}
+
+static void __exit nhpoly1305_mod_exit(void)
+{
+	crypto_unregister_shash(&nhpoly1305_alg);
+}
+
+module_init(nhpoly1305_mod_init);
+module_exit(nhpoly1305_mod_exit);
+
+MODULE_DESCRIPTION("NHPoly1305 ε-almost-∆-universal hash function (NEON-accelerated)");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>");
+MODULE_ALIAS_CRYPTO("nhpoly1305");
+MODULE_ALIAS_CRYPTO("nhpoly1305-neon");
diff --git a/arch/arm64/crypto/poly1305-armv8.pl b/arch/arm64/crypto/poly1305-armv8.pl
new file mode 100644
index 000000000..cbc980fb0
--- /dev/null
+++ b/arch/arm64/crypto/poly1305-armv8.pl
@@ -0,0 +1,913 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause
+#
+# ====================================================================
+# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL
+# project.
+# ====================================================================
+#
+# This module implements Poly1305 hash for ARMv8.
+#
+# June 2015
+#
+# Numbers are cycles per processed byte with poly1305_blocks alone.
+#
+#		IALU/gcc-4.9	NEON
+#
+# Apple A7	1.86/+5%	0.72
+# Cortex-A53	2.69/+58%	1.47
+# Cortex-A57	2.70/+7%	1.14
+# Denver	1.64/+50%	1.18(*)
+# X-Gene	2.13/+68%	2.27
+# Mongoose	1.77/+75%	1.12
+# Kryo		2.70/+55%	1.13
+# ThunderX2	1.17/+95%	1.36
+#
+# (*)	estimate based on resources availability is less than 1.0,
+#	i.e. measured result is worse than expected, presumably binary
+#	translator is not almighty;
+
+$flavour=shift;
+$output=shift;
+
+if ($flavour && $flavour ne "void") {
+    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+    die "can't locate arm-xlate.pl";
+
+    open STDOUT,"| \"$^X\" $xlate $flavour $output";
+} else {
+    open STDOUT,">$output";
+}
+
+my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3));
+my ($mac,$nonce)=($inp,$len);
+
+my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14));
+
+$code.=<<___;
+#ifndef __KERNEL__
+# include "arm_arch.h"
+.extern	OPENSSL_armcap_P
+#endif
+
+.text
+
+// forward "declarations" are required for Apple
+.globl	poly1305_blocks
+.globl	poly1305_emit
+
+.globl	poly1305_init
+.type	poly1305_init,%function
+.align	5
+poly1305_init:
+	cmp	$inp,xzr
+	stp	xzr,xzr,[$ctx]		// zero hash value
+	stp	xzr,xzr,[$ctx,#16]	// [along with is_base2_26]
+
+	csel	x0,xzr,x0,eq
+	b.eq	.Lno_key
+
+#ifndef	__KERNEL__
+	adrp	x17,OPENSSL_armcap_P
+	ldr	w17,[x17,#:lo12:OPENSSL_armcap_P]
+#endif
+
+	ldp	$r0,$r1,[$inp]		// load key
+	mov	$s1,#0xfffffffc0fffffff
+	movk	$s1,#0x0fff,lsl#48
+#ifdef	__AARCH64EB__
+	rev	$r0,$r0			// flip bytes
+	rev	$r1,$r1
+#endif
+	and	$r0,$r0,$s1		// &=0ffffffc0fffffff
+	and	$s1,$s1,#-4
+	and	$r1,$r1,$s1		// &=0ffffffc0ffffffc
+	mov	w#$s1,#-1
+	stp	$r0,$r1,[$ctx,#32]	// save key value
+	str	w#$s1,[$ctx,#48]	// impossible key power value
+
+#ifndef	__KERNEL__
+	tst	w17,#ARMV7_NEON
+
+	adr	$d0,.Lpoly1305_blocks
+	adr	$r0,.Lpoly1305_blocks_neon
+	adr	$d1,.Lpoly1305_emit
+
+	csel	$d0,$d0,$r0,eq
+
+# ifdef	__ILP32__
+	stp	w#$d0,w#$d1,[$len]
+# else
+	stp	$d0,$d1,[$len]
+# endif
+#endif
+	mov	x0,#1
+.Lno_key:
+	ret
+.size	poly1305_init,.-poly1305_init
+
+.type	poly1305_blocks,%function
+.align	5
+poly1305_blocks:
+.Lpoly1305_blocks:
+	ands	$len,$len,#-16
+	b.eq	.Lno_data
+
+	ldp	$h0,$h1,[$ctx]		// load hash value
+	ldp	$h2,x17,[$ctx,#16]	// [along with is_base2_26]
+	ldp	$r0,$r1,[$ctx,#32]	// load key value
+
+#ifdef	__AARCH64EB__
+	lsr	$d0,$h0,#32
+	mov	w#$d1,w#$h0
+	lsr	$d2,$h1,#32
+	mov	w15,w#$h1
+	lsr	x16,$h2,#32
+#else
+	mov	w#$d0,w#$h0
+	lsr	$d1,$h0,#32
+	mov	w#$d2,w#$h1
+	lsr	x15,$h1,#32
+	mov	w16,w#$h2
+#endif
+
+	add	$d0,$d0,$d1,lsl#26	// base 2^26 -> base 2^64
+	lsr	$d1,$d2,#12
+	adds	$d0,$d0,$d2,lsl#52
+	add	$d1,$d1,x15,lsl#14
+	adc	$d1,$d1,xzr
+	lsr	$d2,x16,#24
+	adds	$d1,$d1,x16,lsl#40
+	adc	$d2,$d2,xzr
+
+	cmp	x17,#0			// is_base2_26?
+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
+	csel	$h0,$h0,$d0,eq		// choose between radixes
+	csel	$h1,$h1,$d1,eq
+	csel	$h2,$h2,$d2,eq
+
+.Loop:
+	ldp	$t0,$t1,[$inp],#16	// load input
+	sub	$len,$len,#16
+#ifdef	__AARCH64EB__
+	rev	$t0,$t0
+	rev	$t1,$t1
+#endif
+	adds	$h0,$h0,$t0		// accumulate input
+	adcs	$h1,$h1,$t1
+
+	mul	$d0,$h0,$r0		// h0*r0
+	adc	$h2,$h2,$padbit
+	umulh	$d1,$h0,$r0
+
+	mul	$t0,$h1,$s1		// h1*5*r1
+	umulh	$t1,$h1,$s1
+
+	adds	$d0,$d0,$t0
+	mul	$t0,$h0,$r1		// h0*r1
+	adc	$d1,$d1,$t1
+	umulh	$d2,$h0,$r1
+
+	adds	$d1,$d1,$t0
+	mul	$t0,$h1,$r0		// h1*r0
+	adc	$d2,$d2,xzr
+	umulh	$t1,$h1,$r0
+
+	adds	$d1,$d1,$t0
+	mul	$t0,$h2,$s1		// h2*5*r1
+	adc	$d2,$d2,$t1
+	mul	$t1,$h2,$r0		// h2*r0
+
+	adds	$d1,$d1,$t0
+	adc	$d2,$d2,$t1
+
+	and	$t0,$d2,#-4		// final reduction
+	and	$h2,$d2,#3
+	add	$t0,$t0,$d2,lsr#2
+	adds	$h0,$d0,$t0
+	adcs	$h1,$d1,xzr
+	adc	$h2,$h2,xzr
+
+	cbnz	$len,.Loop
+
+	stp	$h0,$h1,[$ctx]		// store hash value
+	stp	$h2,xzr,[$ctx,#16]	// [and clear is_base2_26]
+
+.Lno_data:
+	ret
+.size	poly1305_blocks,.-poly1305_blocks
+
+.type	poly1305_emit,%function
+.align	5
+poly1305_emit:
+.Lpoly1305_emit:
+	ldp	$h0,$h1,[$ctx]		// load hash base 2^64
+	ldp	$h2,$r0,[$ctx,#16]	// [along with is_base2_26]
+	ldp	$t0,$t1,[$nonce]	// load nonce
+
+#ifdef	__AARCH64EB__
+	lsr	$d0,$h0,#32
+	mov	w#$d1,w#$h0
+	lsr	$d2,$h1,#32
+	mov	w15,w#$h1
+	lsr	x16,$h2,#32
+#else
+	mov	w#$d0,w#$h0
+	lsr	$d1,$h0,#32
+	mov	w#$d2,w#$h1
+	lsr	x15,$h1,#32
+	mov	w16,w#$h2
+#endif
+
+	add	$d0,$d0,$d1,lsl#26	// base 2^26 -> base 2^64
+	lsr	$d1,$d2,#12
+	adds	$d0,$d0,$d2,lsl#52
+	add	$d1,$d1,x15,lsl#14
+	adc	$d1,$d1,xzr
+	lsr	$d2,x16,#24
+	adds	$d1,$d1,x16,lsl#40
+	adc	$d2,$d2,xzr
+
+	cmp	$r0,#0			// is_base2_26?
+	csel	$h0,$h0,$d0,eq		// choose between radixes
+	csel	$h1,$h1,$d1,eq
+	csel	$h2,$h2,$d2,eq
+
+	adds	$d0,$h0,#5		// compare to modulus
+	adcs	$d1,$h1,xzr
+	adc	$d2,$h2,xzr
+
+	tst	$d2,#-4			// see if it's carried/borrowed
+
+	csel	$h0,$h0,$d0,eq
+	csel	$h1,$h1,$d1,eq
+
+#ifdef	__AARCH64EB__
+	ror	$t0,$t0,#32		// flip nonce words
+	ror	$t1,$t1,#32
+#endif
+	adds	$h0,$h0,$t0		// accumulate nonce
+	adc	$h1,$h1,$t1
+#ifdef	__AARCH64EB__
+	rev	$h0,$h0			// flip output bytes
+	rev	$h1,$h1
+#endif
+	stp	$h0,$h1,[$mac]		// write result
+
+	ret
+.size	poly1305_emit,.-poly1305_emit
+___
+my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("v$_.4s",(0..8));
+my ($IN01_0,$IN01_1,$IN01_2,$IN01_3,$IN01_4) = map("v$_.2s",(9..13));
+my ($IN23_0,$IN23_1,$IN23_2,$IN23_3,$IN23_4) = map("v$_.2s",(14..18));
+my ($ACC0,$ACC1,$ACC2,$ACC3,$ACC4) = map("v$_.2d",(19..23));
+my ($H0,$H1,$H2,$H3,$H4) = map("v$_.2s",(24..28));
+my ($T0,$T1,$MASK) = map("v$_",(29..31));
+
+my ($in2,$zeros)=("x16","x17");
+my $is_base2_26 = $zeros;		# borrow
+
+$code.=<<___;
+.type	poly1305_mult,%function
+.align	5
+poly1305_mult:
+	mul	$d0,$h0,$r0		// h0*r0
+	umulh	$d1,$h0,$r0
+
+	mul	$t0,$h1,$s1		// h1*5*r1
+	umulh	$t1,$h1,$s1
+
+	adds	$d0,$d0,$t0
+	mul	$t0,$h0,$r1		// h0*r1
+	adc	$d1,$d1,$t1
+	umulh	$d2,$h0,$r1
+
+	adds	$d1,$d1,$t0
+	mul	$t0,$h1,$r0		// h1*r0
+	adc	$d2,$d2,xzr
+	umulh	$t1,$h1,$r0
+
+	adds	$d1,$d1,$t0
+	mul	$t0,$h2,$s1		// h2*5*r1
+	adc	$d2,$d2,$t1
+	mul	$t1,$h2,$r0		// h2*r0
+
+	adds	$d1,$d1,$t0
+	adc	$d2,$d2,$t1
+
+	and	$t0,$d2,#-4		// final reduction
+	and	$h2,$d2,#3
+	add	$t0,$t0,$d2,lsr#2
+	adds	$h0,$d0,$t0
+	adcs	$h1,$d1,xzr
+	adc	$h2,$h2,xzr
+
+	ret
+.size	poly1305_mult,.-poly1305_mult
+
+.type	poly1305_splat,%function
+.align	4
+poly1305_splat:
+	and	x12,$h0,#0x03ffffff	// base 2^64 -> base 2^26
+	ubfx	x13,$h0,#26,#26
+	extr	x14,$h1,$h0,#52
+	and	x14,x14,#0x03ffffff
+	ubfx	x15,$h1,#14,#26
+	extr	x16,$h2,$h1,#40
+
+	str	w12,[$ctx,#16*0]	// r0
+	add	w12,w13,w13,lsl#2	// r1*5
+	str	w13,[$ctx,#16*1]	// r1
+	add	w13,w14,w14,lsl#2	// r2*5
+	str	w12,[$ctx,#16*2]	// s1
+	str	w14,[$ctx,#16*3]	// r2
+	add	w14,w15,w15,lsl#2	// r3*5
+	str	w13,[$ctx,#16*4]	// s2
+	str	w15,[$ctx,#16*5]	// r3
+	add	w15,w16,w16,lsl#2	// r4*5
+	str	w14,[$ctx,#16*6]	// s3
+	str	w16,[$ctx,#16*7]	// r4
+	str	w15,[$ctx,#16*8]	// s4
+
+	ret
+.size	poly1305_splat,.-poly1305_splat
+
+#ifdef	__KERNEL__
+.globl	poly1305_blocks_neon
+#endif
+.type	poly1305_blocks_neon,%function
+.align	5
+poly1305_blocks_neon:
+.Lpoly1305_blocks_neon:
+	ldr	$is_base2_26,[$ctx,#24]
+	cmp	$len,#128
+	b.lo	.Lpoly1305_blocks
+
+	.inst	0xd503233f		// paciasp
+	stp	x29,x30,[sp,#-80]!
+	add	x29,sp,#0
+
+	stp	d8,d9,[sp,#16]		// meet ABI requirements
+	stp	d10,d11,[sp,#32]
+	stp	d12,d13,[sp,#48]
+	stp	d14,d15,[sp,#64]
+
+	cbz	$is_base2_26,.Lbase2_64_neon
+
+	ldp	w10,w11,[$ctx]		// load hash value base 2^26
+	ldp	w12,w13,[$ctx,#8]
+	ldr	w14,[$ctx,#16]
+
+	tst	$len,#31
+	b.eq	.Leven_neon
+
+	ldp	$r0,$r1,[$ctx,#32]	// load key value
+
+	add	$h0,x10,x11,lsl#26	// base 2^26 -> base 2^64
+	lsr	$h1,x12,#12
+	adds	$h0,$h0,x12,lsl#52
+	add	$h1,$h1,x13,lsl#14
+	adc	$h1,$h1,xzr
+	lsr	$h2,x14,#24
+	adds	$h1,$h1,x14,lsl#40
+	adc	$d2,$h2,xzr		// can be partially reduced...
+
+	ldp	$d0,$d1,[$inp],#16	// load input
+	sub	$len,$len,#16
+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
+
+#ifdef	__AARCH64EB__
+	rev	$d0,$d0
+	rev	$d1,$d1
+#endif
+	adds	$h0,$h0,$d0		// accumulate input
+	adcs	$h1,$h1,$d1
+	adc	$h2,$h2,$padbit
+
+	bl	poly1305_mult
+
+	and	x10,$h0,#0x03ffffff	// base 2^64 -> base 2^26
+	ubfx	x11,$h0,#26,#26
+	extr	x12,$h1,$h0,#52
+	and	x12,x12,#0x03ffffff
+	ubfx	x13,$h1,#14,#26
+	extr	x14,$h2,$h1,#40
+
+	b	.Leven_neon
+
+.align	4
+.Lbase2_64_neon:
+	ldp	$r0,$r1,[$ctx,#32]	// load key value
+
+	ldp	$h0,$h1,[$ctx]		// load hash value base 2^64
+	ldr	$h2,[$ctx,#16]
+
+	tst	$len,#31
+	b.eq	.Linit_neon
+
+	ldp	$d0,$d1,[$inp],#16	// load input
+	sub	$len,$len,#16
+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
+#ifdef	__AARCH64EB__
+	rev	$d0,$d0
+	rev	$d1,$d1
+#endif
+	adds	$h0,$h0,$d0		// accumulate input
+	adcs	$h1,$h1,$d1
+	adc	$h2,$h2,$padbit
+
+	bl	poly1305_mult
+
+.Linit_neon:
+	ldr	w17,[$ctx,#48]		// first table element
+	and	x10,$h0,#0x03ffffff	// base 2^64 -> base 2^26
+	ubfx	x11,$h0,#26,#26
+	extr	x12,$h1,$h0,#52
+	and	x12,x12,#0x03ffffff
+	ubfx	x13,$h1,#14,#26
+	extr	x14,$h2,$h1,#40
+
+	cmp	w17,#-1			// is value impossible?
+	b.ne	.Leven_neon
+
+	fmov	${H0},x10
+	fmov	${H1},x11
+	fmov	${H2},x12
+	fmov	${H3},x13
+	fmov	${H4},x14
+
+	////////////////////////////////// initialize r^n table
+	mov	$h0,$r0			// r^1
+	add	$s1,$r1,$r1,lsr#2	// s1 = r1 + (r1 >> 2)
+	mov	$h1,$r1
+	mov	$h2,xzr
+	add	$ctx,$ctx,#48+12
+	bl	poly1305_splat
+
+	bl	poly1305_mult		// r^2
+	sub	$ctx,$ctx,#4
+	bl	poly1305_splat
+
+	bl	poly1305_mult		// r^3
+	sub	$ctx,$ctx,#4
+	bl	poly1305_splat
+
+	bl	poly1305_mult		// r^4
+	sub	$ctx,$ctx,#4
+	bl	poly1305_splat
+	sub	$ctx,$ctx,#48		// restore original $ctx
+	b	.Ldo_neon
+
+.align	4
+.Leven_neon:
+	fmov	${H0},x10
+	fmov	${H1},x11
+	fmov	${H2},x12
+	fmov	${H3},x13
+	fmov	${H4},x14
+
+.Ldo_neon:
+	ldp	x8,x12,[$inp,#32]	// inp[2:3]
+	subs	$len,$len,#64
+	ldp	x9,x13,[$inp,#48]
+	add	$in2,$inp,#96
+	adr	$zeros,.Lzeros
+
+	lsl	$padbit,$padbit,#24
+	add	x15,$ctx,#48
+
+#ifdef	__AARCH64EB__
+	rev	x8,x8
+	rev	x12,x12
+	rev	x9,x9
+	rev	x13,x13
+#endif
+	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
+	and	x5,x9,#0x03ffffff
+	ubfx	x6,x8,#26,#26
+	ubfx	x7,x9,#26,#26
+	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
+	extr	x8,x12,x8,#52
+	extr	x9,x13,x9,#52
+	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
+	fmov	$IN23_0,x4
+	and	x8,x8,#0x03ffffff
+	and	x9,x9,#0x03ffffff
+	ubfx	x10,x12,#14,#26
+	ubfx	x11,x13,#14,#26
+	add	x12,$padbit,x12,lsr#40
+	add	x13,$padbit,x13,lsr#40
+	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
+	fmov	$IN23_1,x6
+	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
+	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
+	fmov	$IN23_2,x8
+	fmov	$IN23_3,x10
+	fmov	$IN23_4,x12
+
+	ldp	x8,x12,[$inp],#16	// inp[0:1]
+	ldp	x9,x13,[$inp],#48
+
+	ld1	{$R0,$R1,$S1,$R2},[x15],#64
+	ld1	{$S2,$R3,$S3,$R4},[x15],#64
+	ld1	{$S4},[x15]
+
+#ifdef	__AARCH64EB__
+	rev	x8,x8
+	rev	x12,x12
+	rev	x9,x9
+	rev	x13,x13
+#endif
+	and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
+	and	x5,x9,#0x03ffffff
+	ubfx	x6,x8,#26,#26
+	ubfx	x7,x9,#26,#26
+	add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
+	extr	x8,x12,x8,#52
+	extr	x9,x13,x9,#52
+	add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
+	fmov	$IN01_0,x4
+	and	x8,x8,#0x03ffffff
+	and	x9,x9,#0x03ffffff
+	ubfx	x10,x12,#14,#26
+	ubfx	x11,x13,#14,#26
+	add	x12,$padbit,x12,lsr#40
+	add	x13,$padbit,x13,lsr#40
+	add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
+	fmov	$IN01_1,x6
+	add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
+	add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
+	movi	$MASK.2d,#-1
+	fmov	$IN01_2,x8
+	fmov	$IN01_3,x10
+	fmov	$IN01_4,x12
+	ushr	$MASK.2d,$MASK.2d,#38
+
+	b.ls	.Lskip_loop
+
+.align	4
+.Loop_neon:
+	////////////////////////////////////////////////////////////////
+	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2
+	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r
+	//   \___________________/
+	// ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2
+	// ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r
+	//   \___________________/ \____________________/
+	//
+	// Note that we start with inp[2:3]*r^2. This is because it
+	// doesn't depend on reduction in previous iteration.
+	////////////////////////////////////////////////////////////////
+	// d4 = h0*r4 + h1*r3   + h2*r2   + h3*r1   + h4*r0
+	// d3 = h0*r3 + h1*r2   + h2*r1   + h3*r0   + h4*5*r4
+	// d2 = h0*r2 + h1*r1   + h2*r0   + h3*5*r4 + h4*5*r3
+	// d1 = h0*r1 + h1*r0   + h2*5*r4 + h3*5*r3 + h4*5*r2
+	// d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1
+
+	subs	$len,$len,#64
+	umull	$ACC4,$IN23_0,${R4}[2]
+	csel	$in2,$zeros,$in2,lo
+	umull	$ACC3,$IN23_0,${R3}[2]
+	umull	$ACC2,$IN23_0,${R2}[2]
+	 ldp	x8,x12,[$in2],#16	// inp[2:3] (or zero)
+	umull	$ACC1,$IN23_0,${R1}[2]
+	 ldp	x9,x13,[$in2],#48
+	umull	$ACC0,$IN23_0,${R0}[2]
+#ifdef	__AARCH64EB__
+	 rev	x8,x8
+	 rev	x12,x12
+	 rev	x9,x9
+	 rev	x13,x13
+#endif
+
+	umlal	$ACC4,$IN23_1,${R3}[2]
+	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
+	umlal	$ACC3,$IN23_1,${R2}[2]
+	 and	x5,x9,#0x03ffffff
+	umlal	$ACC2,$IN23_1,${R1}[2]
+	 ubfx	x6,x8,#26,#26
+	umlal	$ACC1,$IN23_1,${R0}[2]
+	 ubfx	x7,x9,#26,#26
+	umlal	$ACC0,$IN23_1,${S4}[2]
+	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
+
+	umlal	$ACC4,$IN23_2,${R2}[2]
+	 extr	x8,x12,x8,#52
+	umlal	$ACC3,$IN23_2,${R1}[2]
+	 extr	x9,x13,x9,#52
+	umlal	$ACC2,$IN23_2,${R0}[2]
+	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
+	umlal	$ACC1,$IN23_2,${S4}[2]
+	 fmov	$IN23_0,x4
+	umlal	$ACC0,$IN23_2,${S3}[2]
+	 and	x8,x8,#0x03ffffff
+
+	umlal	$ACC4,$IN23_3,${R1}[2]
+	 and	x9,x9,#0x03ffffff
+	umlal	$ACC3,$IN23_3,${R0}[2]
+	 ubfx	x10,x12,#14,#26
+	umlal	$ACC2,$IN23_3,${S4}[2]
+	 ubfx	x11,x13,#14,#26
+	umlal	$ACC1,$IN23_3,${S3}[2]
+	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
+	umlal	$ACC0,$IN23_3,${S2}[2]
+	 fmov	$IN23_1,x6
+
+	add	$IN01_2,$IN01_2,$H2
+	 add	x12,$padbit,x12,lsr#40
+	umlal	$ACC4,$IN23_4,${R0}[2]
+	 add	x13,$padbit,x13,lsr#40
+	umlal	$ACC3,$IN23_4,${S4}[2]
+	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
+	umlal	$ACC2,$IN23_4,${S3}[2]
+	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
+	umlal	$ACC1,$IN23_4,${S2}[2]
+	 fmov	$IN23_2,x8
+	umlal	$ACC0,$IN23_4,${S1}[2]
+	 fmov	$IN23_3,x10
+
+	////////////////////////////////////////////////////////////////
+	// (hash+inp[0:1])*r^4 and accumulate
+
+	add	$IN01_0,$IN01_0,$H0
+	 fmov	$IN23_4,x12
+	umlal	$ACC3,$IN01_2,${R1}[0]
+	 ldp	x8,x12,[$inp],#16	// inp[0:1]
+	umlal	$ACC0,$IN01_2,${S3}[0]
+	 ldp	x9,x13,[$inp],#48
+	umlal	$ACC4,$IN01_2,${R2}[0]
+	umlal	$ACC1,$IN01_2,${S4}[0]
+	umlal	$ACC2,$IN01_2,${R0}[0]
+#ifdef	__AARCH64EB__
+	 rev	x8,x8
+	 rev	x12,x12
+	 rev	x9,x9
+	 rev	x13,x13
+#endif
+
+	add	$IN01_1,$IN01_1,$H1
+	umlal	$ACC3,$IN01_0,${R3}[0]
+	umlal	$ACC4,$IN01_0,${R4}[0]
+	 and	x4,x8,#0x03ffffff	// base 2^64 -> base 2^26
+	umlal	$ACC2,$IN01_0,${R2}[0]
+	 and	x5,x9,#0x03ffffff
+	umlal	$ACC0,$IN01_0,${R0}[0]
+	 ubfx	x6,x8,#26,#26
+	umlal	$ACC1,$IN01_0,${R1}[0]
+	 ubfx	x7,x9,#26,#26
+
+	add	$IN01_3,$IN01_3,$H3
+	 add	x4,x4,x5,lsl#32		// bfi	x4,x5,#32,#32
+	umlal	$ACC3,$IN01_1,${R2}[0]
+	 extr	x8,x12,x8,#52
+	umlal	$ACC4,$IN01_1,${R3}[0]
+	 extr	x9,x13,x9,#52
+	umlal	$ACC0,$IN01_1,${S4}[0]
+	 add	x6,x6,x7,lsl#32		// bfi	x6,x7,#32,#32
+	umlal	$ACC2,$IN01_1,${R1}[0]
+	 fmov	$IN01_0,x4
+	umlal	$ACC1,$IN01_1,${R0}[0]
+	 and	x8,x8,#0x03ffffff
+
+	add	$IN01_4,$IN01_4,$H4
+	 and	x9,x9,#0x03ffffff
+	umlal	$ACC3,$IN01_3,${R0}[0]
+	 ubfx	x10,x12,#14,#26
+	umlal	$ACC0,$IN01_3,${S2}[0]
+	 ubfx	x11,x13,#14,#26
+	umlal	$ACC4,$IN01_3,${R1}[0]
+	 add	x8,x8,x9,lsl#32		// bfi	x8,x9,#32,#32
+	umlal	$ACC1,$IN01_3,${S3}[0]
+	 fmov	$IN01_1,x6
+	umlal	$ACC2,$IN01_3,${S4}[0]
+	 add	x12,$padbit,x12,lsr#40
+
+	umlal	$ACC3,$IN01_4,${S4}[0]
+	 add	x13,$padbit,x13,lsr#40
+	umlal	$ACC0,$IN01_4,${S1}[0]
+	 add	x10,x10,x11,lsl#32	// bfi	x10,x11,#32,#32
+	umlal	$ACC4,$IN01_4,${R0}[0]
+	 add	x12,x12,x13,lsl#32	// bfi	x12,x13,#32,#32
+	umlal	$ACC1,$IN01_4,${S2}[0]
+	 fmov	$IN01_2,x8
+	umlal	$ACC2,$IN01_4,${S3}[0]
+	 fmov	$IN01_3,x10
+	 fmov	$IN01_4,x12
+
+	/////////////////////////////////////////////////////////////////
+	// lazy reduction as discussed in "NEON crypto" by D.J. Bernstein
+	// and P. Schwabe
+	//
+	// [see discussion in poly1305-armv4 module]
+
+	ushr	$T0.2d,$ACC3,#26
+	xtn	$H3,$ACC3
+	 ushr	$T1.2d,$ACC0,#26
+	 and	$ACC0,$ACC0,$MASK.2d
+	add	$ACC4,$ACC4,$T0.2d	// h3 -> h4
+	bic	$H3,#0xfc,lsl#24	// &=0x03ffffff
+	 add	$ACC1,$ACC1,$T1.2d	// h0 -> h1
+
+	ushr	$T0.2d,$ACC4,#26
+	xtn	$H4,$ACC4
+	 ushr	$T1.2d,$ACC1,#26
+	 xtn	$H1,$ACC1
+	bic	$H4,#0xfc,lsl#24
+	 add	$ACC2,$ACC2,$T1.2d	// h1 -> h2
+
+	add	$ACC0,$ACC0,$T0.2d
+	shl	$T0.2d,$T0.2d,#2
+	 shrn	$T1.2s,$ACC2,#26
+	 xtn	$H2,$ACC2
+	add	$ACC0,$ACC0,$T0.2d	// h4 -> h0
+	 bic	$H1,#0xfc,lsl#24
+	 add	$H3,$H3,$T1.2s		// h2 -> h3
+	 bic	$H2,#0xfc,lsl#24
+
+	shrn	$T0.2s,$ACC0,#26
+	xtn	$H0,$ACC0
+	 ushr	$T1.2s,$H3,#26
+	 bic	$H3,#0xfc,lsl#24
+	 bic	$H0,#0xfc,lsl#24
+	add	$H1,$H1,$T0.2s		// h0 -> h1
+	 add	$H4,$H4,$T1.2s		// h3 -> h4
+
+	b.hi	.Loop_neon
+
+.Lskip_loop:
+	dup	$IN23_2,${IN23_2}[0]
+	add	$IN01_2,$IN01_2,$H2
+
+	////////////////////////////////////////////////////////////////
+	// multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1
+
+	adds	$len,$len,#32
+	b.ne	.Long_tail
+
+	dup	$IN23_2,${IN01_2}[0]
+	add	$IN23_0,$IN01_0,$H0
+	add	$IN23_3,$IN01_3,$H3
+	add	$IN23_1,$IN01_1,$H1
+	add	$IN23_4,$IN01_4,$H4
+
+.Long_tail:
+	dup	$IN23_0,${IN23_0}[0]
+	umull2	$ACC0,$IN23_2,${S3}
+	umull2	$ACC3,$IN23_2,${R1}
+	umull2	$ACC4,$IN23_2,${R2}
+	umull2	$ACC2,$IN23_2,${R0}
+	umull2	$ACC1,$IN23_2,${S4}
+
+	dup	$IN23_1,${IN23_1}[0]
+	umlal2	$ACC0,$IN23_0,${R0}
+	umlal2	$ACC2,$IN23_0,${R2}
+	umlal2	$ACC3,$IN23_0,${R3}
+	umlal2	$ACC4,$IN23_0,${R4}
+	umlal2	$ACC1,$IN23_0,${R1}
+
+	dup	$IN23_3,${IN23_3}[0]
+	umlal2	$ACC0,$IN23_1,${S4}
+	umlal2	$ACC3,$IN23_1,${R2}
+	umlal2	$ACC2,$IN23_1,${R1}
+	umlal2	$ACC4,$IN23_1,${R3}
+	umlal2	$ACC1,$IN23_1,${R0}
+
+	dup	$IN23_4,${IN23_4}[0]
+	umlal2	$ACC3,$IN23_3,${R0}
+	umlal2	$ACC4,$IN23_3,${R1}
+	umlal2	$ACC0,$IN23_3,${S2}
+	umlal2	$ACC1,$IN23_3,${S3}
+	umlal2	$ACC2,$IN23_3,${S4}
+
+	umlal2	$ACC3,$IN23_4,${S4}
+	umlal2	$ACC0,$IN23_4,${S1}
+	umlal2	$ACC4,$IN23_4,${R0}
+	umlal2	$ACC1,$IN23_4,${S2}
+	umlal2	$ACC2,$IN23_4,${S3}
+
+	b.eq	.Lshort_tail
+
+	////////////////////////////////////////////////////////////////
+	// (hash+inp[0:1])*r^4:r^3 and accumulate
+
+	add	$IN01_0,$IN01_0,$H0
+	umlal	$ACC3,$IN01_2,${R1}
+	umlal	$ACC0,$IN01_2,${S3}
+	umlal	$ACC4,$IN01_2,${R2}
+	umlal	$ACC1,$IN01_2,${S4}
+	umlal	$ACC2,$IN01_2,${R0}
+
+	add	$IN01_1,$IN01_1,$H1
+	umlal	$ACC3,$IN01_0,${R3}
+	umlal	$ACC0,$IN01_0,${R0}
+	umlal	$ACC4,$IN01_0,${R4}
+	umlal	$ACC1,$IN01_0,${R1}
+	umlal	$ACC2,$IN01_0,${R2}
+
+	add	$IN01_3,$IN01_3,$H3
+	umlal	$ACC3,$IN01_1,${R2}
+	umlal	$ACC0,$IN01_1,${S4}
+	umlal	$ACC4,$IN01_1,${R3}
+	umlal	$ACC1,$IN01_1,${R0}
+	umlal	$ACC2,$IN01_1,${R1}
+
+	add	$IN01_4,$IN01_4,$H4
+	umlal	$ACC3,$IN01_3,${R0}
+	umlal	$ACC0,$IN01_3,${S2}
+	umlal	$ACC4,$IN01_3,${R1}
+	umlal	$ACC1,$IN01_3,${S3}
+	umlal	$ACC2,$IN01_3,${S4}
+
+	umlal	$ACC3,$IN01_4,${S4}
+	umlal	$ACC0,$IN01_4,${S1}
+	umlal	$ACC4,$IN01_4,${R0}
+	umlal	$ACC1,$IN01_4,${S2}
+	umlal	$ACC2,$IN01_4,${S3}
+
+.Lshort_tail:
+	////////////////////////////////////////////////////////////////
+	// horizontal add
+
+	addp	$ACC3,$ACC3,$ACC3
+	 ldp	d8,d9,[sp,#16]		// meet ABI requirements
+	addp	$ACC0,$ACC0,$ACC0
+	 ldp	d10,d11,[sp,#32]
+	addp	$ACC4,$ACC4,$ACC4
+	 ldp	d12,d13,[sp,#48]
+	addp	$ACC1,$ACC1,$ACC1
+	 ldp	d14,d15,[sp,#64]
+	addp	$ACC2,$ACC2,$ACC2
+	 ldr	x30,[sp,#8]
+
+	////////////////////////////////////////////////////////////////
+	// lazy reduction, but without narrowing
+
+	ushr	$T0.2d,$ACC3,#26
+	and	$ACC3,$ACC3,$MASK.2d
+	 ushr	$T1.2d,$ACC0,#26
+	 and	$ACC0,$ACC0,$MASK.2d
+
+	add	$ACC4,$ACC4,$T0.2d	// h3 -> h4
+	 add	$ACC1,$ACC1,$T1.2d	// h0 -> h1
+
+	ushr	$T0.2d,$ACC4,#26
+	and	$ACC4,$ACC4,$MASK.2d
+	 ushr	$T1.2d,$ACC1,#26
+	 and	$ACC1,$ACC1,$MASK.2d
+	 add	$ACC2,$ACC2,$T1.2d	// h1 -> h2
+
+	add	$ACC0,$ACC0,$T0.2d
+	shl	$T0.2d,$T0.2d,#2
+	 ushr	$T1.2d,$ACC2,#26
+	 and	$ACC2,$ACC2,$MASK.2d
+	add	$ACC0,$ACC0,$T0.2d	// h4 -> h0
+	 add	$ACC3,$ACC3,$T1.2d	// h2 -> h3
+
+	ushr	$T0.2d,$ACC0,#26
+	and	$ACC0,$ACC0,$MASK.2d
+	 ushr	$T1.2d,$ACC3,#26
+	 and	$ACC3,$ACC3,$MASK.2d
+	add	$ACC1,$ACC1,$T0.2d	// h0 -> h1
+	 add	$ACC4,$ACC4,$T1.2d	// h3 -> h4
+
+	////////////////////////////////////////////////////////////////
+	// write the result, can be partially reduced
+
+	st4	{$ACC0,$ACC1,$ACC2,$ACC3}[0],[$ctx],#16
+	mov	x4,#1
+	st1	{$ACC4}[0],[$ctx]
+	str	x4,[$ctx,#8]		// set is_base2_26
+
+	ldr	x29,[sp],#80
+	 .inst	0xd50323bf		// autiasp
+	ret
+.size	poly1305_blocks_neon,.-poly1305_blocks_neon
+
+.align	5
+.Lzeros:
+.long	0,0,0,0,0,0,0,0
+.asciz	"Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm"
+.align	2
+#if !defined(__KERNEL__) && !defined(_WIN64)
+.comm	OPENSSL_armcap_P,4,4
+.hidden	OPENSSL_armcap_P
+#endif
+___
+
+foreach (split("\n",$code)) {
+	s/\b(shrn\s+v[0-9]+)\.[24]d/$1.2s/			or
+	s/\b(fmov\s+)v([0-9]+)[^,]*,\s*x([0-9]+)/$1d$2,x$3/	or
+	(m/\bdup\b/ and (s/\.[24]s/.2d/g or 1))			or
+	(m/\b(eor|and)/ and (s/\.[248][sdh]/.16b/g or 1))	or
+	(m/\bum(ul|la)l\b/ and (s/\.4s/.2s/g or 1))		or
+	(m/\bum(ul|la)l2\b/ and (s/\.2s/.4s/g or 1))		or
+	(m/\bst[1-4]\s+{[^}]+}\[/ and (s/\.[24]d/.s/g or 1));
+
+	s/\.[124]([sd])\[/.$1\[/;
+	s/w#x([0-9]+)/w$1/g;
+
+	print $_,"\n";
+}
+close STDOUT;
diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c
new file mode 100644
index 000000000..1fae18ba1
--- /dev/null
+++ b/arch/arm64/crypto/poly1305-glue.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64
+ *
+ * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/algapi.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/poly1305.h>
+#include <crypto/internal/simd.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/jump_label.h>
+#include <linux/module.h>
+
+asmlinkage void poly1305_init_arm64(void *state, const u8 *key);
+asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_emit(void *state, u8 *digest, const u32 *nonce);
+
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
+
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
+{
+	poly1305_init_arm64(&dctx->h, key);
+	dctx->s[0] = get_unaligned_le32(key + 16);
+	dctx->s[1] = get_unaligned_le32(key + 20);
+	dctx->s[2] = get_unaligned_le32(key + 24);
+	dctx->s[3] = get_unaligned_le32(key + 28);
+	dctx->buflen = 0;
+}
+EXPORT_SYMBOL(poly1305_init_arch);
+
+static int neon_poly1305_init(struct shash_desc *desc)
+{
+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	dctx->buflen = 0;
+	dctx->rset = 0;
+	dctx->sset = false;
+
+	return 0;
+}
+
+static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src,
+				 u32 len, u32 hibit, bool do_neon)
+{
+	if (unlikely(!dctx->sset)) {
+		if (!dctx->rset) {
+			poly1305_init_arm64(&dctx->h, src);
+			src += POLY1305_BLOCK_SIZE;
+			len -= POLY1305_BLOCK_SIZE;
+			dctx->rset = 1;
+		}
+		if (len >= POLY1305_BLOCK_SIZE) {
+			dctx->s[0] = get_unaligned_le32(src +  0);
+			dctx->s[1] = get_unaligned_le32(src +  4);
+			dctx->s[2] = get_unaligned_le32(src +  8);
+			dctx->s[3] = get_unaligned_le32(src + 12);
+			src += POLY1305_BLOCK_SIZE;
+			len -= POLY1305_BLOCK_SIZE;
+			dctx->sset = true;
+		}
+		if (len < POLY1305_BLOCK_SIZE)
+			return;
+	}
+
+	len &= ~(POLY1305_BLOCK_SIZE - 1);
+
+	if (static_branch_likely(&have_neon) && likely(do_neon))
+		poly1305_blocks_neon(&dctx->h, src, len, hibit);
+	else
+		poly1305_blocks(&dctx->h, src, len, hibit);
+}
+
+static void neon_poly1305_do_update(struct poly1305_desc_ctx *dctx,
+				    const u8 *src, u32 len, bool do_neon)
+{
+	if (unlikely(dctx->buflen)) {
+		u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen);
+
+		memcpy(dctx->buf + dctx->buflen, src, bytes);
+		src += bytes;
+		len -= bytes;
+		dctx->buflen += bytes;
+
+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
+			neon_poly1305_blocks(dctx, dctx->buf,
+					     POLY1305_BLOCK_SIZE, 1, false);
+			dctx->buflen = 0;
+		}
+	}
+
+	if (likely(len >= POLY1305_BLOCK_SIZE)) {
+		neon_poly1305_blocks(dctx, src, len, 1, do_neon);
+		src += round_down(len, POLY1305_BLOCK_SIZE);
+		len %= POLY1305_BLOCK_SIZE;
+	}
+
+	if (unlikely(len)) {
+		dctx->buflen = len;
+		memcpy(dctx->buf, src, len);
+	}
+}
+
+static int neon_poly1305_update(struct shash_desc *desc,
+				const u8 *src, unsigned int srclen)
+{
+	bool do_neon = crypto_simd_usable() && srclen > 128;
+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	if (static_branch_likely(&have_neon) && do_neon)
+		kernel_neon_begin();
+	neon_poly1305_do_update(dctx, src, srclen, do_neon);
+	if (static_branch_likely(&have_neon) && do_neon)
+		kernel_neon_end();
+	return 0;
+}
+
+void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src,
+			  unsigned int nbytes)
+{
+	if (unlikely(dctx->buflen)) {
+		u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen);
+
+		memcpy(dctx->buf + dctx->buflen, src, bytes);
+		src += bytes;
+		nbytes -= bytes;
+		dctx->buflen += bytes;
+
+		if (dctx->buflen == POLY1305_BLOCK_SIZE) {
+			poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 1);
+			dctx->buflen = 0;
+		}
+	}
+
+	if (likely(nbytes >= POLY1305_BLOCK_SIZE)) {
+		unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE);
+
+		if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
+			do {
+				unsigned int todo = min_t(unsigned int, len, SZ_4K);
+
+				kernel_neon_begin();
+				poly1305_blocks_neon(&dctx->h, src, todo, 1);
+				kernel_neon_end();
+
+				len -= todo;
+				src += todo;
+			} while (len);
+		} else {
+			poly1305_blocks(&dctx->h, src, len, 1);
+			src += len;
+		}
+		nbytes %= POLY1305_BLOCK_SIZE;
+	}
+
+	if (unlikely(nbytes)) {
+		dctx->buflen = nbytes;
+		memcpy(dctx->buf, src, nbytes);
+	}
+}
+EXPORT_SYMBOL(poly1305_update_arch);
+
+void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst)
+{
+	if (unlikely(dctx->buflen)) {
+		dctx->buf[dctx->buflen++] = 1;
+		memset(dctx->buf + dctx->buflen, 0,
+		       POLY1305_BLOCK_SIZE - dctx->buflen);
+		poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0);
+	}
+
+	poly1305_emit(&dctx->h, dst, dctx->s);
+	memzero_explicit(dctx, sizeof(*dctx));
+}
+EXPORT_SYMBOL(poly1305_final_arch);
+
+static int neon_poly1305_final(struct shash_desc *desc, u8 *dst)
+{
+	struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	if (unlikely(!dctx->sset))
+		return -ENOKEY;
+
+	poly1305_final_arch(dctx, dst);
+	return 0;
+}
+
+static struct shash_alg neon_poly1305_alg = {
+	.init			= neon_poly1305_init,
+	.update			= neon_poly1305_update,
+	.final			= neon_poly1305_final,
+	.digestsize		= POLY1305_DIGEST_SIZE,
+	.descsize		= sizeof(struct poly1305_desc_ctx),
+
+	.base.cra_name		= "poly1305",
+	.base.cra_driver_name	= "poly1305-neon",
+	.base.cra_priority	= 200,
+	.base.cra_blocksize	= POLY1305_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+};
+
+static int __init neon_poly1305_mod_init(void)
+{
+	if (!cpu_have_named_feature(ASIMD))
+		return 0;
+
+	static_branch_enable(&have_neon);
+
+	return IS_REACHABLE(CONFIG_CRYPTO_HASH) ?
+		crypto_register_shash(&neon_poly1305_alg) : 0;
+}
+
+static void __exit neon_poly1305_mod_exit(void)
+{
+	if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && cpu_have_named_feature(ASIMD))
+		crypto_unregister_shash(&neon_poly1305_alg);
+}
+
+module_init(neon_poly1305_mod_init);
+module_exit(neon_poly1305_mod_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("poly1305");
+MODULE_ALIAS_CRYPTO("poly1305-neon");
diff --git a/arch/arm64/crypto/polyval-ce-core.S b/arch/arm64/crypto/polyval-ce-core.S
new file mode 100644
index 000000000..b5326540d
--- /dev/null
+++ b/arch/arm64/crypto/polyval-ce-core.S
@@ -0,0 +1,361 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Implementation of POLYVAL using ARMv8 Crypto Extensions.
+ *
+ * Copyright 2021 Google LLC
+ */
+/*
+ * This is an efficient implementation of POLYVAL using ARMv8 Crypto Extensions
+ * It works on 8 blocks at a time, by precomputing the first 8 keys powers h^8,
+ * ..., h^1 in the POLYVAL finite field. This precomputation allows us to split
+ * finite field multiplication into two steps.
+ *
+ * In the first step, we consider h^i, m_i as normal polynomials of degree less
+ * than 128. We then compute p(x) = h^8m_0 + ... + h^1m_7 where multiplication
+ * is simply polynomial multiplication.
+ *
+ * In the second step, we compute the reduction of p(x) modulo the finite field
+ * modulus g(x) = x^128 + x^127 + x^126 + x^121 + 1.
+ *
+ * This two step process is equivalent to computing h^8m_0 + ... + h^1m_7 where
+ * multiplication is finite field multiplication. The advantage is that the
+ * two-step process  only requires 1 finite field reduction for every 8
+ * polynomial multiplications. Further parallelism is gained by interleaving the
+ * multiplications and polynomial reductions.
+ */
+
+#include <linux/linkage.h>
+#define STRIDE_BLOCKS 8
+
+KEY_POWERS	.req	x0
+MSG		.req	x1
+BLOCKS_LEFT	.req	x2
+ACCUMULATOR	.req	x3
+KEY_START	.req	x10
+EXTRA_BYTES	.req	x11
+TMP	.req	x13
+
+M0	.req	v0
+M1	.req	v1
+M2	.req	v2
+M3	.req	v3
+M4	.req	v4
+M5	.req	v5
+M6	.req	v6
+M7	.req	v7
+KEY8	.req	v8
+KEY7	.req	v9
+KEY6	.req	v10
+KEY5	.req	v11
+KEY4	.req	v12
+KEY3	.req	v13
+KEY2	.req	v14
+KEY1	.req	v15
+PL	.req	v16
+PH	.req	v17
+TMP_V	.req	v18
+LO	.req	v20
+MI	.req	v21
+HI	.req	v22
+SUM	.req	v23
+GSTAR	.req	v24
+
+	.text
+
+	.arch	armv8-a+crypto
+	.align	4
+
+.Lgstar:
+	.quad	0xc200000000000000, 0xc200000000000000
+
+/*
+ * Computes the product of two 128-bit polynomials in X and Y and XORs the
+ * components of the 256-bit product into LO, MI, HI.
+ *
+ * Given:
+ *  X = [X_1 : X_0]
+ *  Y = [Y_1 : Y_0]
+ *
+ * We compute:
+ *  LO += X_0 * Y_0
+ *  MI += (X_0 + X_1) * (Y_0 + Y_1)
+ *  HI += X_1 * Y_1
+ *
+ * Later, the 256-bit result can be extracted as:
+ *   [HI_1 : HI_0 + HI_1 + MI_1 + LO_1 : LO_1 + HI_0 + MI_0 + LO_0 : LO_0]
+ * This step is done when computing the polynomial reduction for efficiency
+ * reasons.
+ *
+ * Karatsuba multiplication is used instead of Schoolbook multiplication because
+ * it was found to be slightly faster on ARM64 CPUs.
+ *
+ */
+.macro karatsuba1 X Y
+	X .req \X
+	Y .req \Y
+	ext	v25.16b, X.16b, X.16b, #8
+	ext	v26.16b, Y.16b, Y.16b, #8
+	eor	v25.16b, v25.16b, X.16b
+	eor	v26.16b, v26.16b, Y.16b
+	pmull2	v28.1q, X.2d, Y.2d
+	pmull	v29.1q, X.1d, Y.1d
+	pmull	v27.1q, v25.1d, v26.1d
+	eor	HI.16b, HI.16b, v28.16b
+	eor	LO.16b, LO.16b, v29.16b
+	eor	MI.16b, MI.16b, v27.16b
+	.unreq X
+	.unreq Y
+.endm
+
+/*
+ * Same as karatsuba1, except overwrites HI, LO, MI rather than XORing into
+ * them.
+ */
+.macro karatsuba1_store X Y
+	X .req \X
+	Y .req \Y
+	ext	v25.16b, X.16b, X.16b, #8
+	ext	v26.16b, Y.16b, Y.16b, #8
+	eor	v25.16b, v25.16b, X.16b
+	eor	v26.16b, v26.16b, Y.16b
+	pmull2	HI.1q, X.2d, Y.2d
+	pmull	LO.1q, X.1d, Y.1d
+	pmull	MI.1q, v25.1d, v26.1d
+	.unreq X
+	.unreq Y
+.endm
+
+/*
+ * Computes the 256-bit polynomial represented by LO, HI, MI. Stores
+ * the result in PL, PH.
+ * [PH : PL] =
+ *   [HI_1 : HI_1 + HI_0 + MI_1 + LO_1 : HI_0 + MI_0 + LO_1 + LO_0 : LO_0]
+ */
+.macro karatsuba2
+	// v4 = [HI_1 + MI_1 : HI_0 + MI_0]
+	eor	v4.16b, HI.16b, MI.16b
+	// v4 = [HI_1 + MI_1 + LO_1 : HI_0 + MI_0 + LO_0]
+	eor	v4.16b, v4.16b, LO.16b
+	// v5 = [HI_0 : LO_1]
+	ext	v5.16b, LO.16b, HI.16b, #8
+	// v4 = [HI_1 + HI_0 + MI_1 + LO_1 : HI_0 + MI_0 + LO_1 + LO_0]
+	eor	v4.16b, v4.16b, v5.16b
+	// HI = [HI_0 : HI_1]
+	ext	HI.16b, HI.16b, HI.16b, #8
+	// LO = [LO_0 : LO_1]
+	ext	LO.16b, LO.16b, LO.16b, #8
+	// PH = [HI_1 : HI_1 + HI_0 + MI_1 + LO_1]
+	ext	PH.16b, v4.16b, HI.16b, #8
+	// PL = [HI_0 + MI_0 + LO_1 + LO_0 : LO_0]
+	ext	PL.16b, LO.16b, v4.16b, #8
+.endm
+
+/*
+ * Computes the 128-bit reduction of PH : PL. Stores the result in dest.
+ *
+ * This macro computes p(x) mod g(x) where p(x) is in montgomery form and g(x) =
+ * x^128 + x^127 + x^126 + x^121 + 1.
+ *
+ * We have a 256-bit polynomial PH : PL = P_3 : P_2 : P_1 : P_0 that is the
+ * product of two 128-bit polynomials in Montgomery form.  We need to reduce it
+ * mod g(x).  Also, since polynomials in Montgomery form have an "extra" factor
+ * of x^128, this product has two extra factors of x^128.  To get it back into
+ * Montgomery form, we need to remove one of these factors by dividing by x^128.
+ *
+ * To accomplish both of these goals, we add multiples of g(x) that cancel out
+ * the low 128 bits P_1 : P_0, leaving just the high 128 bits. Since the low
+ * bits are zero, the polynomial division by x^128 can be done by right
+ * shifting.
+ *
+ * Since the only nonzero term in the low 64 bits of g(x) is the constant term,
+ * the multiple of g(x) needed to cancel out P_0 is P_0 * g(x).  The CPU can
+ * only do 64x64 bit multiplications, so split P_0 * g(x) into x^128 * P_0 +
+ * x^64 * g*(x) * P_0 + P_0, where g*(x) is bits 64-127 of g(x).  Adding this to
+ * the original polynomial gives P_3 : P_2 + P_0 + T_1 : P_1 + T_0 : 0, where T
+ * = T_1 : T_0 = g*(x) * P_0.  Thus, bits 0-63 got "folded" into bits 64-191.
+ *
+ * Repeating this same process on the next 64 bits "folds" bits 64-127 into bits
+ * 128-255, giving the answer in bits 128-255. This time, we need to cancel P_1
+ * + T_0 in bits 64-127. The multiple of g(x) required is (P_1 + T_0) * g(x) *
+ * x^64. Adding this to our previous computation gives P_3 + P_1 + T_0 + V_1 :
+ * P_2 + P_0 + T_1 + V_0 : 0 : 0, where V = V_1 : V_0 = g*(x) * (P_1 + T_0).
+ *
+ * So our final computation is:
+ *   T = T_1 : T_0 = g*(x) * P_0
+ *   V = V_1 : V_0 = g*(x) * (P_1 + T_0)
+ *   p(x) / x^{128} mod g(x) = P_3 + P_1 + T_0 + V_1 : P_2 + P_0 + T_1 + V_0
+ *
+ * The implementation below saves a XOR instruction by computing P_1 + T_0 : P_0
+ * + T_1 and XORing into dest, rather than separately XORing P_1 : P_0 and T_0 :
+ * T_1 into dest.  This allows us to reuse P_1 + T_0 when computing V.
+ */
+.macro montgomery_reduction dest
+	DEST .req \dest
+	// TMP_V = T_1 : T_0 = P_0 * g*(x)
+	pmull	TMP_V.1q, PL.1d, GSTAR.1d
+	// TMP_V = T_0 : T_1
+	ext	TMP_V.16b, TMP_V.16b, TMP_V.16b, #8
+	// TMP_V = P_1 + T_0 : P_0 + T_1
+	eor	TMP_V.16b, PL.16b, TMP_V.16b
+	// PH = P_3 + P_1 + T_0 : P_2 + P_0 + T_1
+	eor	PH.16b, PH.16b, TMP_V.16b
+	// TMP_V = V_1 : V_0 = (P_1 + T_0) * g*(x)
+	pmull2	TMP_V.1q, TMP_V.2d, GSTAR.2d
+	eor	DEST.16b, PH.16b, TMP_V.16b
+	.unreq DEST
+.endm
+
+/*
+ * Compute Polyval on 8 blocks.
+ *
+ * If reduce is set, also computes the montgomery reduction of the
+ * previous full_stride call and XORs with the first message block.
+ * (m_0 + REDUCE(PL, PH))h^8 + ... + m_7h^1.
+ * I.e., the first multiplication uses m_0 + REDUCE(PL, PH) instead of m_0.
+ *
+ * Sets PL, PH.
+ */
+.macro full_stride reduce
+	eor		LO.16b, LO.16b, LO.16b
+	eor		MI.16b, MI.16b, MI.16b
+	eor		HI.16b, HI.16b, HI.16b
+
+	ld1		{M0.16b, M1.16b, M2.16b, M3.16b}, [MSG], #64
+	ld1		{M4.16b, M5.16b, M6.16b, M7.16b}, [MSG], #64
+
+	karatsuba1 M7 KEY1
+	.if \reduce
+	pmull	TMP_V.1q, PL.1d, GSTAR.1d
+	.endif
+
+	karatsuba1 M6 KEY2
+	.if \reduce
+	ext	TMP_V.16b, TMP_V.16b, TMP_V.16b, #8
+	.endif
+
+	karatsuba1 M5 KEY3
+	.if \reduce
+	eor	TMP_V.16b, PL.16b, TMP_V.16b
+	.endif
+
+	karatsuba1 M4 KEY4
+	.if \reduce
+	eor	PH.16b, PH.16b, TMP_V.16b
+	.endif
+
+	karatsuba1 M3 KEY5
+	.if \reduce
+	pmull2	TMP_V.1q, TMP_V.2d, GSTAR.2d
+	.endif
+
+	karatsuba1 M2 KEY6
+	.if \reduce
+	eor	SUM.16b, PH.16b, TMP_V.16b
+	.endif
+
+	karatsuba1 M1 KEY7
+	eor	M0.16b, M0.16b, SUM.16b
+
+	karatsuba1 M0 KEY8
+	karatsuba2
+.endm
+
+/*
+ * Handle any extra blocks after full_stride loop.
+ */
+.macro partial_stride
+	add	KEY_POWERS, KEY_START, #(STRIDE_BLOCKS << 4)
+	sub	KEY_POWERS, KEY_POWERS, BLOCKS_LEFT, lsl #4
+	ld1	{KEY1.16b}, [KEY_POWERS], #16
+
+	ld1	{TMP_V.16b}, [MSG], #16
+	eor	SUM.16b, SUM.16b, TMP_V.16b
+	karatsuba1_store KEY1 SUM
+	sub	BLOCKS_LEFT, BLOCKS_LEFT, #1
+
+	tst	BLOCKS_LEFT, #4
+	beq	.Lpartial4BlocksDone
+	ld1	{M0.16b, M1.16b,  M2.16b, M3.16b}, [MSG], #64
+	ld1	{KEY8.16b, KEY7.16b, KEY6.16b,	KEY5.16b}, [KEY_POWERS], #64
+	karatsuba1 M0 KEY8
+	karatsuba1 M1 KEY7
+	karatsuba1 M2 KEY6
+	karatsuba1 M3 KEY5
+.Lpartial4BlocksDone:
+	tst	BLOCKS_LEFT, #2
+	beq	.Lpartial2BlocksDone
+	ld1	{M0.16b, M1.16b}, [MSG], #32
+	ld1	{KEY8.16b, KEY7.16b}, [KEY_POWERS], #32
+	karatsuba1 M0 KEY8
+	karatsuba1 M1 KEY7
+.Lpartial2BlocksDone:
+	tst	BLOCKS_LEFT, #1
+	beq	.LpartialDone
+	ld1	{M0.16b}, [MSG], #16
+	ld1	{KEY8.16b}, [KEY_POWERS], #16
+	karatsuba1 M0 KEY8
+.LpartialDone:
+	karatsuba2
+	montgomery_reduction SUM
+.endm
+
+/*
+ * Perform montgomery multiplication in GF(2^128) and store result in op1.
+ *
+ * Computes op1*op2*x^{-128} mod x^128 + x^127 + x^126 + x^121 + 1
+ * If op1, op2 are in montgomery form, this computes the montgomery
+ * form of op1*op2.
+ *
+ * void pmull_polyval_mul(u8 *op1, const u8 *op2);
+ */
+SYM_FUNC_START(pmull_polyval_mul)
+	adr	TMP, .Lgstar
+	ld1	{GSTAR.2d}, [TMP]
+	ld1	{v0.16b}, [x0]
+	ld1	{v1.16b}, [x1]
+	karatsuba1_store v0 v1
+	karatsuba2
+	montgomery_reduction SUM
+	st1	{SUM.16b}, [x0]
+	ret
+SYM_FUNC_END(pmull_polyval_mul)
+
+/*
+ * Perform polynomial evaluation as specified by POLYVAL.  This computes:
+ *	h^n * accumulator + h^n * m_0 + ... + h^1 * m_{n-1}
+ * where n=nblocks, h is the hash key, and m_i are the message blocks.
+ *
+ * x0 - pointer to precomputed key powers h^8 ... h^1
+ * x1 - pointer to message blocks
+ * x2 - number of blocks to hash
+ * x3 - pointer to accumulator
+ *
+ * void pmull_polyval_update(const struct polyval_ctx *ctx, const u8 *in,
+ *			     size_t nblocks, u8 *accumulator);
+ */
+SYM_FUNC_START(pmull_polyval_update)
+	adr	TMP, .Lgstar
+	mov	KEY_START, KEY_POWERS
+	ld1	{GSTAR.2d}, [TMP]
+	ld1	{SUM.16b}, [ACCUMULATOR]
+	subs	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
+	blt .LstrideLoopExit
+	ld1	{KEY8.16b, KEY7.16b, KEY6.16b, KEY5.16b}, [KEY_POWERS], #64
+	ld1	{KEY4.16b, KEY3.16b, KEY2.16b, KEY1.16b}, [KEY_POWERS], #64
+	full_stride 0
+	subs	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
+	blt .LstrideLoopExitReduce
+.LstrideLoop:
+	full_stride 1
+	subs	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
+	bge	.LstrideLoop
+.LstrideLoopExitReduce:
+	montgomery_reduction SUM
+.LstrideLoopExit:
+	adds	BLOCKS_LEFT, BLOCKS_LEFT, #STRIDE_BLOCKS
+	beq	.LskipPartial
+	partial_stride
+.LskipPartial:
+	st1	{SUM.16b}, [ACCUMULATOR]
+	ret
+SYM_FUNC_END(pmull_polyval_update)
diff --git a/arch/arm64/crypto/polyval-ce-glue.c b/arch/arm64/crypto/polyval-ce-glue.c
new file mode 100644
index 000000000..0a3b5718d
--- /dev/null
+++ b/arch/arm64/crypto/polyval-ce-glue.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Glue code for POLYVAL using ARMv8 Crypto Extensions
+ *
+ * Copyright (c) 2007 Nokia Siemens Networks - Mikko Herranen <mh1@iki.fi>
+ * Copyright (c) 2009 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ * Copyright 2021 Google LLC
+ */
+
+/*
+ * Glue code based on ghash-clmulni-intel_glue.c.
+ *
+ * This implementation of POLYVAL uses montgomery multiplication accelerated by
+ * ARMv8 Crypto Extensions instructions to implement the finite field operations.
+ */
+
+#include <crypto/algapi.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/polyval.h>
+#include <linux/crypto.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpufeature.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+
+#define NUM_KEY_POWERS	8
+
+struct polyval_tfm_ctx {
+	/*
+	 * These powers must be in the order h^8, ..., h^1.
+	 */
+	u8 key_powers[NUM_KEY_POWERS][POLYVAL_BLOCK_SIZE];
+};
+
+struct polyval_desc_ctx {
+	u8 buffer[POLYVAL_BLOCK_SIZE];
+	u32 bytes;
+};
+
+asmlinkage void pmull_polyval_update(const struct polyval_tfm_ctx *keys,
+	const u8 *in, size_t nblocks, u8 *accumulator);
+asmlinkage void pmull_polyval_mul(u8 *op1, const u8 *op2);
+
+static void internal_polyval_update(const struct polyval_tfm_ctx *keys,
+	const u8 *in, size_t nblocks, u8 *accumulator)
+{
+	if (likely(crypto_simd_usable())) {
+		kernel_neon_begin();
+		pmull_polyval_update(keys, in, nblocks, accumulator);
+		kernel_neon_end();
+	} else {
+		polyval_update_non4k(keys->key_powers[NUM_KEY_POWERS-1], in,
+			nblocks, accumulator);
+	}
+}
+
+static void internal_polyval_mul(u8 *op1, const u8 *op2)
+{
+	if (likely(crypto_simd_usable())) {
+		kernel_neon_begin();
+		pmull_polyval_mul(op1, op2);
+		kernel_neon_end();
+	} else {
+		polyval_mul_non4k(op1, op2);
+	}
+}
+
+static int polyval_arm64_setkey(struct crypto_shash *tfm,
+			const u8 *key, unsigned int keylen)
+{
+	struct polyval_tfm_ctx *tctx = crypto_shash_ctx(tfm);
+	int i;
+
+	if (keylen != POLYVAL_BLOCK_SIZE)
+		return -EINVAL;
+
+	memcpy(tctx->key_powers[NUM_KEY_POWERS-1], key, POLYVAL_BLOCK_SIZE);
+
+	for (i = NUM_KEY_POWERS-2; i >= 0; i--) {
+		memcpy(tctx->key_powers[i], key, POLYVAL_BLOCK_SIZE);
+		internal_polyval_mul(tctx->key_powers[i],
+				     tctx->key_powers[i+1]);
+	}
+
+	return 0;
+}
+
+static int polyval_arm64_init(struct shash_desc *desc)
+{
+	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	memset(dctx, 0, sizeof(*dctx));
+
+	return 0;
+}
+
+static int polyval_arm64_update(struct shash_desc *desc,
+			 const u8 *src, unsigned int srclen)
+{
+	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
+	const struct polyval_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	u8 *pos;
+	unsigned int nblocks;
+	unsigned int n;
+
+	if (dctx->bytes) {
+		n = min(srclen, dctx->bytes);
+		pos = dctx->buffer + POLYVAL_BLOCK_SIZE - dctx->bytes;
+
+		dctx->bytes -= n;
+		srclen -= n;
+
+		while (n--)
+			*pos++ ^= *src++;
+
+		if (!dctx->bytes)
+			internal_polyval_mul(dctx->buffer,
+					    tctx->key_powers[NUM_KEY_POWERS-1]);
+	}
+
+	while (srclen >= POLYVAL_BLOCK_SIZE) {
+		/* allow rescheduling every 4K bytes */
+		nblocks = min(srclen, 4096U) / POLYVAL_BLOCK_SIZE;
+		internal_polyval_update(tctx, src, nblocks, dctx->buffer);
+		srclen -= nblocks * POLYVAL_BLOCK_SIZE;
+		src += nblocks * POLYVAL_BLOCK_SIZE;
+	}
+
+	if (srclen) {
+		dctx->bytes = POLYVAL_BLOCK_SIZE - srclen;
+		pos = dctx->buffer;
+		while (srclen--)
+			*pos++ ^= *src++;
+	}
+
+	return 0;
+}
+
+static int polyval_arm64_final(struct shash_desc *desc, u8 *dst)
+{
+	struct polyval_desc_ctx *dctx = shash_desc_ctx(desc);
+	const struct polyval_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+
+	if (dctx->bytes) {
+		internal_polyval_mul(dctx->buffer,
+				     tctx->key_powers[NUM_KEY_POWERS-1]);
+	}
+
+	memcpy(dst, dctx->buffer, POLYVAL_BLOCK_SIZE);
+
+	return 0;
+}
+
+static struct shash_alg polyval_alg = {
+	.digestsize	= POLYVAL_DIGEST_SIZE,
+	.init		= polyval_arm64_init,
+	.update		= polyval_arm64_update,
+	.final		= polyval_arm64_final,
+	.setkey		= polyval_arm64_setkey,
+	.descsize	= sizeof(struct polyval_desc_ctx),
+	.base		= {
+		.cra_name		= "polyval",
+		.cra_driver_name	= "polyval-ce",
+		.cra_priority		= 200,
+		.cra_blocksize		= POLYVAL_BLOCK_SIZE,
+		.cra_ctxsize		= sizeof(struct polyval_tfm_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+};
+
+static int __init polyval_ce_mod_init(void)
+{
+	return crypto_register_shash(&polyval_alg);
+}
+
+static void __exit polyval_ce_mod_exit(void)
+{
+	crypto_unregister_shash(&polyval_alg);
+}
+
+module_cpu_feature_match(PMULL, polyval_ce_mod_init)
+module_exit(polyval_ce_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("POLYVAL hash function accelerated by ARMv8 Crypto Extensions");
+MODULE_ALIAS_CRYPTO("polyval");
+MODULE_ALIAS_CRYPTO("polyval-ce");
diff --git a/arch/arm64/crypto/sha1-ce-core.S b/arch/arm64/crypto/sha1-ce-core.S
new file mode 100644
index 000000000..889ca0f89
--- /dev/null
+++ b/arch/arm64/crypto/sha1-ce-core.S
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * sha1-ce-core.S - SHA-1 secure hash using ARMv8 Crypto Extensions
+ *
+ * Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+	.arch		armv8-a+crypto
+
+	k0		.req	v0
+	k1		.req	v1
+	k2		.req	v2
+	k3		.req	v3
+
+	t0		.req	v4
+	t1		.req	v5
+
+	dga		.req	q6
+	dgav		.req	v6
+	dgb		.req	s7
+	dgbv		.req	v7
+
+	dg0q		.req	q12
+	dg0s		.req	s12
+	dg0v		.req	v12
+	dg1s		.req	s13
+	dg1v		.req	v13
+	dg2s		.req	s14
+
+	.macro		add_only, op, ev, rc, s0, dg1
+	.ifc		\ev, ev
+	add		t1.4s, v\s0\().4s, \rc\().4s
+	sha1h		dg2s, dg0s
+	.ifnb		\dg1
+	sha1\op		dg0q, \dg1, t0.4s
+	.else
+	sha1\op		dg0q, dg1s, t0.4s
+	.endif
+	.else
+	.ifnb		\s0
+	add		t0.4s, v\s0\().4s, \rc\().4s
+	.endif
+	sha1h		dg1s, dg0s
+	sha1\op		dg0q, dg2s, t1.4s
+	.endif
+	.endm
+
+	.macro		add_update, op, ev, rc, s0, s1, s2, s3, dg1
+	sha1su0		v\s0\().4s, v\s1\().4s, v\s2\().4s
+	add_only	\op, \ev, \rc, \s1, \dg1
+	sha1su1		v\s0\().4s, v\s3\().4s
+	.endm
+
+	.macro		loadrc, k, val, tmp
+	movz		\tmp, :abs_g0_nc:\val
+	movk		\tmp, :abs_g1:\val
+	dup		\k, \tmp
+	.endm
+
+	/*
+	 * int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
+	 *			 int blocks)
+	 */
+SYM_FUNC_START(sha1_ce_transform)
+	/* load round constants */
+	loadrc		k0.4s, 0x5a827999, w6
+	loadrc		k1.4s, 0x6ed9eba1, w6
+	loadrc		k2.4s, 0x8f1bbcdc, w6
+	loadrc		k3.4s, 0xca62c1d6, w6
+
+	/* load state */
+	ld1		{dgav.4s}, [x0]
+	ldr		dgb, [x0, #16]
+
+	/* load sha1_ce_state::finalize */
+	ldr_l		w4, sha1_ce_offsetof_finalize, x4
+	ldr		w4, [x0, x4]
+
+	/* load input */
+0:	ld1		{v8.4s-v11.4s}, [x1], #64
+	sub		w2, w2, #1
+
+CPU_LE(	rev32		v8.16b, v8.16b		)
+CPU_LE(	rev32		v9.16b, v9.16b		)
+CPU_LE(	rev32		v10.16b, v10.16b	)
+CPU_LE(	rev32		v11.16b, v11.16b	)
+
+1:	add		t0.4s, v8.4s, k0.4s
+	mov		dg0v.16b, dgav.16b
+
+	add_update	c, ev, k0,  8,  9, 10, 11, dgb
+	add_update	c, od, k0,  9, 10, 11,  8
+	add_update	c, ev, k0, 10, 11,  8,  9
+	add_update	c, od, k0, 11,  8,  9, 10
+	add_update	c, ev, k1,  8,  9, 10, 11
+
+	add_update	p, od, k1,  9, 10, 11,  8
+	add_update	p, ev, k1, 10, 11,  8,  9
+	add_update	p, od, k1, 11,  8,  9, 10
+	add_update	p, ev, k1,  8,  9, 10, 11
+	add_update	p, od, k2,  9, 10, 11,  8
+
+	add_update	m, ev, k2, 10, 11,  8,  9
+	add_update	m, od, k2, 11,  8,  9, 10
+	add_update	m, ev, k2,  8,  9, 10, 11
+	add_update	m, od, k2,  9, 10, 11,  8
+	add_update	m, ev, k3, 10, 11,  8,  9
+
+	add_update	p, od, k3, 11,  8,  9, 10
+	add_only	p, ev, k3,  9
+	add_only	p, od, k3, 10
+	add_only	p, ev, k3, 11
+	add_only	p, od
+
+	/* update state */
+	add		dgbv.2s, dgbv.2s, dg1v.2s
+	add		dgav.4s, dgav.4s, dg0v.4s
+
+	cbz		w2, 2f
+	cond_yield	3f, x5, x6
+	b		0b
+
+	/*
+	 * Final block: add padding and total bit count.
+	 * Skip if the input size was not a round multiple of the block size,
+	 * the padding is handled by the C code in that case.
+	 */
+2:	cbz		x4, 3f
+	ldr_l		w4, sha1_ce_offsetof_count, x4
+	ldr		x4, [x0, x4]
+	movi		v9.2d, #0
+	mov		x8, #0x80000000
+	movi		v10.2d, #0
+	ror		x7, x4, #29		// ror(lsl(x4, 3), 32)
+	fmov		d8, x8
+	mov		x4, #0
+	mov		v11.d[0], xzr
+	mov		v11.d[1], x7
+	b		1b
+
+	/* store new state */
+3:	st1		{dgav.4s}, [x0]
+	str		dgb, [x0, #16]
+	mov		w0, w2
+	ret
+SYM_FUNC_END(sha1_ce_transform)
diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c
new file mode 100644
index 000000000..71fa4f112
--- /dev/null
+++ b/arch/arm64/crypto/sha1-ce-glue.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sha1-ce-glue.c - SHA-1 secure hash using ARMv8 Crypto Extensions
+ *
+ * Copyright (C) 2014 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sha1.h>
+#include <crypto/sha1_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("SHA1 secure hash using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha1");
+
+struct sha1_ce_state {
+	struct sha1_state	sst;
+	u32			finalize;
+};
+
+extern const u32 sha1_ce_offsetof_count;
+extern const u32 sha1_ce_offsetof_finalize;
+
+asmlinkage int sha1_ce_transform(struct sha1_ce_state *sst, u8 const *src,
+				 int blocks);
+
+static void __sha1_ce_transform(struct sha1_state *sst, u8 const *src,
+				int blocks)
+{
+	while (blocks) {
+		int rem;
+
+		kernel_neon_begin();
+		rem = sha1_ce_transform(container_of(sst, struct sha1_ce_state,
+						     sst), src, blocks);
+		kernel_neon_end();
+		src += (blocks - rem) * SHA1_BLOCK_SIZE;
+		blocks = rem;
+	}
+}
+
+const u32 sha1_ce_offsetof_count = offsetof(struct sha1_ce_state, sst.count);
+const u32 sha1_ce_offsetof_finalize = offsetof(struct sha1_ce_state, finalize);
+
+static int sha1_ce_update(struct shash_desc *desc, const u8 *data,
+			  unsigned int len)
+{
+	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+
+	if (!crypto_simd_usable())
+		return crypto_sha1_update(desc, data, len);
+
+	sctx->finalize = 0;
+	sha1_base_do_update(desc, data, len, __sha1_ce_transform);
+
+	return 0;
+}
+
+static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
+			 unsigned int len, u8 *out)
+{
+	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+	bool finalize = !sctx->sst.count && !(len % SHA1_BLOCK_SIZE) && len;
+
+	if (!crypto_simd_usable())
+		return crypto_sha1_finup(desc, data, len, out);
+
+	/*
+	 * Allow the asm code to perform the finalization if there is no
+	 * partial data and the input is a round multiple of the block size.
+	 */
+	sctx->finalize = finalize;
+
+	sha1_base_do_update(desc, data, len, __sha1_ce_transform);
+	if (!finalize)
+		sha1_base_do_finalize(desc, __sha1_ce_transform);
+	return sha1_base_finish(desc, out);
+}
+
+static int sha1_ce_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+
+	if (!crypto_simd_usable())
+		return crypto_sha1_finup(desc, NULL, 0, out);
+
+	sctx->finalize = 0;
+	sha1_base_do_finalize(desc, __sha1_ce_transform);
+	return sha1_base_finish(desc, out);
+}
+
+static int sha1_ce_export(struct shash_desc *desc, void *out)
+{
+	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(out, &sctx->sst, sizeof(struct sha1_state));
+	return 0;
+}
+
+static int sha1_ce_import(struct shash_desc *desc, const void *in)
+{
+	struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(&sctx->sst, in, sizeof(struct sha1_state));
+	sctx->finalize = 0;
+	return 0;
+}
+
+static struct shash_alg alg = {
+	.init			= sha1_base_init,
+	.update			= sha1_ce_update,
+	.final			= sha1_ce_final,
+	.finup			= sha1_ce_finup,
+	.import			= sha1_ce_import,
+	.export			= sha1_ce_export,
+	.descsize		= sizeof(struct sha1_ce_state),
+	.statesize		= sizeof(struct sha1_state),
+	.digestsize		= SHA1_DIGEST_SIZE,
+	.base			= {
+		.cra_name		= "sha1",
+		.cra_driver_name	= "sha1-ce",
+		.cra_priority		= 200,
+		.cra_blocksize		= SHA1_BLOCK_SIZE,
+		.cra_module		= THIS_MODULE,
+	}
+};
+
+static int __init sha1_ce_mod_init(void)
+{
+	return crypto_register_shash(&alg);
+}
+
+static void __exit sha1_ce_mod_fini(void)
+{
+	crypto_unregister_shash(&alg);
+}
+
+module_cpu_feature_match(SHA1, sha1_ce_mod_init);
+module_exit(sha1_ce_mod_fini);
diff --git a/arch/arm64/crypto/sha2-ce-core.S b/arch/arm64/crypto/sha2-ce-core.S
new file mode 100644
index 000000000..491179922
--- /dev/null
+++ b/arch/arm64/crypto/sha2-ce-core.S
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * sha2-ce-core.S - core SHA-224/SHA-256 transform using v8 Crypto Extensions
+ *
+ * Copyright (C) 2014 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.text
+	.arch		armv8-a+crypto
+
+	dga		.req	q20
+	dgav		.req	v20
+	dgb		.req	q21
+	dgbv		.req	v21
+
+	t0		.req	v22
+	t1		.req	v23
+
+	dg0q		.req	q24
+	dg0v		.req	v24
+	dg1q		.req	q25
+	dg1v		.req	v25
+	dg2q		.req	q26
+	dg2v		.req	v26
+
+	.macro		add_only, ev, rc, s0
+	mov		dg2v.16b, dg0v.16b
+	.ifeq		\ev
+	add		t1.4s, v\s0\().4s, \rc\().4s
+	sha256h		dg0q, dg1q, t0.4s
+	sha256h2	dg1q, dg2q, t0.4s
+	.else
+	.ifnb		\s0
+	add		t0.4s, v\s0\().4s, \rc\().4s
+	.endif
+	sha256h		dg0q, dg1q, t1.4s
+	sha256h2	dg1q, dg2q, t1.4s
+	.endif
+	.endm
+
+	.macro		add_update, ev, rc, s0, s1, s2, s3
+	sha256su0	v\s0\().4s, v\s1\().4s
+	add_only	\ev, \rc, \s1
+	sha256su1	v\s0\().4s, v\s2\().4s, v\s3\().4s
+	.endm
+
+	/*
+	 * The SHA-256 round constants
+	 */
+	.section	".rodata", "a"
+	.align		4
+.Lsha2_rcon:
+	.word		0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
+	.word		0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
+	.word		0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
+	.word		0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
+	.word		0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
+	.word		0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
+	.word		0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
+	.word		0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
+	.word		0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
+	.word		0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
+	.word		0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
+	.word		0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
+	.word		0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
+	.word		0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
+	.word		0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
+	.word		0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
+
+	/*
+	 * void sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src,
+	 *			  int blocks)
+	 */
+	.text
+SYM_FUNC_START(sha2_ce_transform)
+	/* load round constants */
+	adr_l		x8, .Lsha2_rcon
+	ld1		{ v0.4s- v3.4s}, [x8], #64
+	ld1		{ v4.4s- v7.4s}, [x8], #64
+	ld1		{ v8.4s-v11.4s}, [x8], #64
+	ld1		{v12.4s-v15.4s}, [x8]
+
+	/* load state */
+	ld1		{dgav.4s, dgbv.4s}, [x0]
+
+	/* load sha256_ce_state::finalize */
+	ldr_l		w4, sha256_ce_offsetof_finalize, x4
+	ldr		w4, [x0, x4]
+
+	/* load input */
+0:	ld1		{v16.4s-v19.4s}, [x1], #64
+	sub		w2, w2, #1
+
+CPU_LE(	rev32		v16.16b, v16.16b	)
+CPU_LE(	rev32		v17.16b, v17.16b	)
+CPU_LE(	rev32		v18.16b, v18.16b	)
+CPU_LE(	rev32		v19.16b, v19.16b	)
+
+1:	add		t0.4s, v16.4s, v0.4s
+	mov		dg0v.16b, dgav.16b
+	mov		dg1v.16b, dgbv.16b
+
+	add_update	0,  v1, 16, 17, 18, 19
+	add_update	1,  v2, 17, 18, 19, 16
+	add_update	0,  v3, 18, 19, 16, 17
+	add_update	1,  v4, 19, 16, 17, 18
+
+	add_update	0,  v5, 16, 17, 18, 19
+	add_update	1,  v6, 17, 18, 19, 16
+	add_update	0,  v7, 18, 19, 16, 17
+	add_update	1,  v8, 19, 16, 17, 18
+
+	add_update	0,  v9, 16, 17, 18, 19
+	add_update	1, v10, 17, 18, 19, 16
+	add_update	0, v11, 18, 19, 16, 17
+	add_update	1, v12, 19, 16, 17, 18
+
+	add_only	0, v13, 17
+	add_only	1, v14, 18
+	add_only	0, v15, 19
+	add_only	1
+
+	/* update state */
+	add		dgav.4s, dgav.4s, dg0v.4s
+	add		dgbv.4s, dgbv.4s, dg1v.4s
+
+	/* handled all input blocks? */
+	cbz		w2, 2f
+	cond_yield	3f, x5, x6
+	b		0b
+
+	/*
+	 * Final block: add padding and total bit count.
+	 * Skip if the input size was not a round multiple of the block size,
+	 * the padding is handled by the C code in that case.
+	 */
+2:	cbz		x4, 3f
+	ldr_l		w4, sha256_ce_offsetof_count, x4
+	ldr		x4, [x0, x4]
+	movi		v17.2d, #0
+	mov		x8, #0x80000000
+	movi		v18.2d, #0
+	ror		x7, x4, #29		// ror(lsl(x4, 3), 32)
+	fmov		d16, x8
+	mov		x4, #0
+	mov		v19.d[0], xzr
+	mov		v19.d[1], x7
+	b		1b
+
+	/* store new state */
+3:	st1		{dgav.4s, dgbv.4s}, [x0]
+	mov		w0, w2
+	ret
+SYM_FUNC_END(sha2_ce_transform)
diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c
new file mode 100644
index 000000000..c57a6119f
--- /dev/null
+++ b/arch/arm64/crypto/sha2-ce-glue.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sha2-ce-glue.c - SHA-224/SHA-256 using ARMv8 Crypto Extensions
+ *
+ * Copyright (C) 2014 - 2017 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sha2.h>
+#include <crypto/sha256_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
+
+struct sha256_ce_state {
+	struct sha256_state	sst;
+	u32			finalize;
+};
+
+extern const u32 sha256_ce_offsetof_count;
+extern const u32 sha256_ce_offsetof_finalize;
+
+asmlinkage int sha2_ce_transform(struct sha256_ce_state *sst, u8 const *src,
+				 int blocks);
+
+static void __sha2_ce_transform(struct sha256_state *sst, u8 const *src,
+				int blocks)
+{
+	while (blocks) {
+		int rem;
+
+		kernel_neon_begin();
+		rem = sha2_ce_transform(container_of(sst, struct sha256_ce_state,
+						     sst), src, blocks);
+		kernel_neon_end();
+		src += (blocks - rem) * SHA256_BLOCK_SIZE;
+		blocks = rem;
+	}
+}
+
+const u32 sha256_ce_offsetof_count = offsetof(struct sha256_ce_state,
+					      sst.count);
+const u32 sha256_ce_offsetof_finalize = offsetof(struct sha256_ce_state,
+						 finalize);
+
+asmlinkage void sha256_block_data_order(u32 *digest, u8 const *src, int blocks);
+
+static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src,
+				      int blocks)
+{
+	sha256_block_data_order(sst->state, src, blocks);
+}
+
+static int sha256_ce_update(struct shash_desc *desc, const u8 *data,
+			    unsigned int len)
+{
+	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+	if (!crypto_simd_usable())
+		return sha256_base_do_update(desc, data, len,
+				__sha256_block_data_order);
+
+	sctx->finalize = 0;
+	sha256_base_do_update(desc, data, len, __sha2_ce_transform);
+
+	return 0;
+}
+
+static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
+			   unsigned int len, u8 *out)
+{
+	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+	bool finalize = !sctx->sst.count && !(len % SHA256_BLOCK_SIZE) && len;
+
+	if (!crypto_simd_usable()) {
+		if (len)
+			sha256_base_do_update(desc, data, len,
+				__sha256_block_data_order);
+		sha256_base_do_finalize(desc, __sha256_block_data_order);
+		return sha256_base_finish(desc, out);
+	}
+
+	/*
+	 * Allow the asm code to perform the finalization if there is no
+	 * partial data and the input is a round multiple of the block size.
+	 */
+	sctx->finalize = finalize;
+
+	sha256_base_do_update(desc, data, len, __sha2_ce_transform);
+	if (!finalize)
+		sha256_base_do_finalize(desc, __sha2_ce_transform);
+	return sha256_base_finish(desc, out);
+}
+
+static int sha256_ce_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+	if (!crypto_simd_usable()) {
+		sha256_base_do_finalize(desc, __sha256_block_data_order);
+		return sha256_base_finish(desc, out);
+	}
+
+	sctx->finalize = 0;
+	sha256_base_do_finalize(desc, __sha2_ce_transform);
+	return sha256_base_finish(desc, out);
+}
+
+static int sha256_ce_export(struct shash_desc *desc, void *out)
+{
+	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(out, &sctx->sst, sizeof(struct sha256_state));
+	return 0;
+}
+
+static int sha256_ce_import(struct shash_desc *desc, const void *in)
+{
+	struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+	memcpy(&sctx->sst, in, sizeof(struct sha256_state));
+	sctx->finalize = 0;
+	return 0;
+}
+
+static struct shash_alg algs[] = { {
+	.init			= sha224_base_init,
+	.update			= sha256_ce_update,
+	.final			= sha256_ce_final,
+	.finup			= sha256_ce_finup,
+	.export			= sha256_ce_export,
+	.import			= sha256_ce_import,
+	.descsize		= sizeof(struct sha256_ce_state),
+	.statesize		= sizeof(struct sha256_state),
+	.digestsize		= SHA224_DIGEST_SIZE,
+	.base			= {
+		.cra_name		= "sha224",
+		.cra_driver_name	= "sha224-ce",
+		.cra_priority		= 200,
+		.cra_blocksize		= SHA256_BLOCK_SIZE,
+		.cra_module		= THIS_MODULE,
+	}
+}, {
+	.init			= sha256_base_init,
+	.update			= sha256_ce_update,
+	.final			= sha256_ce_final,
+	.finup			= sha256_ce_finup,
+	.export			= sha256_ce_export,
+	.import			= sha256_ce_import,
+	.descsize		= sizeof(struct sha256_ce_state),
+	.statesize		= sizeof(struct sha256_state),
+	.digestsize		= SHA256_DIGEST_SIZE,
+	.base			= {
+		.cra_name		= "sha256",
+		.cra_driver_name	= "sha256-ce",
+		.cra_priority		= 200,
+		.cra_blocksize		= SHA256_BLOCK_SIZE,
+		.cra_module		= THIS_MODULE,
+	}
+} };
+
+static int __init sha2_ce_mod_init(void)
+{
+	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
+}
+
+static void __exit sha2_ce_mod_fini(void)
+{
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_cpu_feature_match(SHA2, sha2_ce_mod_init);
+module_exit(sha2_ce_mod_fini);
diff --git a/arch/arm64/crypto/sha256-glue.c b/arch/arm64/crypto/sha256-glue.c
new file mode 100644
index 000000000..9b5c86e07
--- /dev/null
+++ b/arch/arm64/crypto/sha256-glue.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux/arm64 port of the OpenSSL SHA256 implementation for AArch64
+ *
+ * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sha2.h>
+#include <crypto/sha256_base.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+MODULE_DESCRIPTION("SHA-224/SHA-256 secure hash for arm64");
+MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
+
+asmlinkage void sha256_block_data_order(u32 *digest, const void *data,
+					unsigned int num_blks);
+EXPORT_SYMBOL(sha256_block_data_order);
+
+static void __sha256_block_data_order(struct sha256_state *sst, u8 const *src,
+				      int blocks)
+{
+	sha256_block_data_order(sst->state, src, blocks);
+}
+
+asmlinkage void sha256_block_neon(u32 *digest, const void *data,
+				  unsigned int num_blks);
+
+static void __sha256_block_neon(struct sha256_state *sst, u8 const *src,
+				int blocks)
+{
+	sha256_block_neon(sst->state, src, blocks);
+}
+
+static int crypto_sha256_arm64_update(struct shash_desc *desc, const u8 *data,
+				      unsigned int len)
+{
+	return sha256_base_do_update(desc, data, len,
+				     __sha256_block_data_order);
+}
+
+static int crypto_sha256_arm64_finup(struct shash_desc *desc, const u8 *data,
+				     unsigned int len, u8 *out)
+{
+	if (len)
+		sha256_base_do_update(desc, data, len,
+				      __sha256_block_data_order);
+	sha256_base_do_finalize(desc, __sha256_block_data_order);
+
+	return sha256_base_finish(desc, out);
+}
+
+static int crypto_sha256_arm64_final(struct shash_desc *desc, u8 *out)
+{
+	return crypto_sha256_arm64_finup(desc, NULL, 0, out);
+}
+
+static struct shash_alg algs[] = { {
+	.digestsize		= SHA256_DIGEST_SIZE,
+	.init			= sha256_base_init,
+	.update			= crypto_sha256_arm64_update,
+	.final			= crypto_sha256_arm64_final,
+	.finup			= crypto_sha256_arm64_finup,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha256",
+	.base.cra_driver_name	= "sha256-arm64",
+	.base.cra_priority	= 125,
+	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= SHA224_DIGEST_SIZE,
+	.init			= sha224_base_init,
+	.update			= crypto_sha256_arm64_update,
+	.final			= crypto_sha256_arm64_final,
+	.finup			= crypto_sha256_arm64_finup,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha224",
+	.base.cra_driver_name	= "sha224-arm64",
+	.base.cra_priority	= 125,
+	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int sha256_update_neon(struct shash_desc *desc, const u8 *data,
+			      unsigned int len)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+
+	if (!crypto_simd_usable())
+		return sha256_base_do_update(desc, data, len,
+				__sha256_block_data_order);
+
+	while (len > 0) {
+		unsigned int chunk = len;
+
+		/*
+		 * Don't hog the CPU for the entire time it takes to process all
+		 * input when running on a preemptible kernel, but process the
+		 * data block by block instead.
+		 */
+		if (IS_ENABLED(CONFIG_PREEMPTION) &&
+		    chunk + sctx->count % SHA256_BLOCK_SIZE > SHA256_BLOCK_SIZE)
+			chunk = SHA256_BLOCK_SIZE -
+				sctx->count % SHA256_BLOCK_SIZE;
+
+		kernel_neon_begin();
+		sha256_base_do_update(desc, data, chunk, __sha256_block_neon);
+		kernel_neon_end();
+		data += chunk;
+		len -= chunk;
+	}
+	return 0;
+}
+
+static int sha256_finup_neon(struct shash_desc *desc, const u8 *data,
+			     unsigned int len, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		if (len)
+			sha256_base_do_update(desc, data, len,
+				__sha256_block_data_order);
+		sha256_base_do_finalize(desc, __sha256_block_data_order);
+	} else {
+		if (len)
+			sha256_update_neon(desc, data, len);
+		kernel_neon_begin();
+		sha256_base_do_finalize(desc, __sha256_block_neon);
+		kernel_neon_end();
+	}
+	return sha256_base_finish(desc, out);
+}
+
+static int sha256_final_neon(struct shash_desc *desc, u8 *out)
+{
+	return sha256_finup_neon(desc, NULL, 0, out);
+}
+
+static struct shash_alg neon_algs[] = { {
+	.digestsize		= SHA256_DIGEST_SIZE,
+	.init			= sha256_base_init,
+	.update			= sha256_update_neon,
+	.final			= sha256_final_neon,
+	.finup			= sha256_finup_neon,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha256",
+	.base.cra_driver_name	= "sha256-arm64-neon",
+	.base.cra_priority	= 150,
+	.base.cra_blocksize	= SHA256_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= SHA224_DIGEST_SIZE,
+	.init			= sha224_base_init,
+	.update			= sha256_update_neon,
+	.final			= sha256_final_neon,
+	.finup			= sha256_finup_neon,
+	.descsize		= sizeof(struct sha256_state),
+	.base.cra_name		= "sha224",
+	.base.cra_driver_name	= "sha224-arm64-neon",
+	.base.cra_priority	= 150,
+	.base.cra_blocksize	= SHA224_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int __init sha256_mod_init(void)
+{
+	int ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
+	if (ret)
+		return ret;
+
+	if (cpu_have_named_feature(ASIMD)) {
+		ret = crypto_register_shashes(neon_algs, ARRAY_SIZE(neon_algs));
+		if (ret)
+			crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+	}
+	return ret;
+}
+
+static void __exit sha256_mod_fini(void)
+{
+	if (cpu_have_named_feature(ASIMD))
+		crypto_unregister_shashes(neon_algs, ARRAY_SIZE(neon_algs));
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_init(sha256_mod_init);
+module_exit(sha256_mod_fini);
diff --git a/arch/arm64/crypto/sha3-ce-core.S b/arch/arm64/crypto/sha3-ce-core.S
new file mode 100644
index 000000000..9c77313f5
--- /dev/null
+++ b/arch/arm64/crypto/sha3-ce-core.S
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * sha3-ce-core.S - core SHA-3 transform using v8.2 Crypto Extensions
+ *
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.irp	b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+	.set	.Lv\b\().2d, \b
+	.set	.Lv\b\().16b, \b
+	.endr
+
+	/*
+	 * ARMv8.2 Crypto Extensions instructions
+	 */
+	.macro	eor3, rd, rn, rm, ra
+	.inst	0xce000000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16)
+	.endm
+
+	.macro	rax1, rd, rn, rm
+	.inst	0xce608c00 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
+	.endm
+
+	.macro	bcax, rd, rn, rm, ra
+	.inst	0xce200000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16)
+	.endm
+
+	.macro	xar, rd, rn, rm, imm6
+	.inst	0xce800000 | .L\rd | (.L\rn << 5) | ((\imm6) << 10) | (.L\rm << 16)
+	.endm
+
+	/*
+	 * int sha3_ce_transform(u64 *st, const u8 *data, int blocks, int dg_size)
+	 */
+	.text
+SYM_FUNC_START(sha3_ce_transform)
+	/* load state */
+	add	x8, x0, #32
+	ld1	{ v0.1d- v3.1d}, [x0]
+	ld1	{ v4.1d- v7.1d}, [x8], #32
+	ld1	{ v8.1d-v11.1d}, [x8], #32
+	ld1	{v12.1d-v15.1d}, [x8], #32
+	ld1	{v16.1d-v19.1d}, [x8], #32
+	ld1	{v20.1d-v23.1d}, [x8], #32
+	ld1	{v24.1d}, [x8]
+
+0:	sub	w2, w2, #1
+	mov	w8, #24
+	adr_l	x9, .Lsha3_rcon
+
+	/* load input */
+	ld1	{v25.8b-v28.8b}, [x1], #32
+	ld1	{v29.8b-v31.8b}, [x1], #24
+	eor	v0.8b, v0.8b, v25.8b
+	eor	v1.8b, v1.8b, v26.8b
+	eor	v2.8b, v2.8b, v27.8b
+	eor	v3.8b, v3.8b, v28.8b
+	eor	v4.8b, v4.8b, v29.8b
+	eor	v5.8b, v5.8b, v30.8b
+	eor	v6.8b, v6.8b, v31.8b
+
+	tbnz	x3, #6, 2f		// SHA3-512
+
+	ld1	{v25.8b-v28.8b}, [x1], #32
+	ld1	{v29.8b-v30.8b}, [x1], #16
+	eor	 v7.8b,  v7.8b, v25.8b
+	eor	 v8.8b,  v8.8b, v26.8b
+	eor	 v9.8b,  v9.8b, v27.8b
+	eor	v10.8b, v10.8b, v28.8b
+	eor	v11.8b, v11.8b, v29.8b
+	eor	v12.8b, v12.8b, v30.8b
+
+	tbnz	x3, #4, 1f		// SHA3-384 or SHA3-224
+
+	// SHA3-256
+	ld1	{v25.8b-v28.8b}, [x1], #32
+	eor	v13.8b, v13.8b, v25.8b
+	eor	v14.8b, v14.8b, v26.8b
+	eor	v15.8b, v15.8b, v27.8b
+	eor	v16.8b, v16.8b, v28.8b
+	b	3f
+
+1:	tbz	x3, #2, 3f		// bit 2 cleared? SHA-384
+
+	// SHA3-224
+	ld1	{v25.8b-v28.8b}, [x1], #32
+	ld1	{v29.8b}, [x1], #8
+	eor	v13.8b, v13.8b, v25.8b
+	eor	v14.8b, v14.8b, v26.8b
+	eor	v15.8b, v15.8b, v27.8b
+	eor	v16.8b, v16.8b, v28.8b
+	eor	v17.8b, v17.8b, v29.8b
+	b	3f
+
+	// SHA3-512
+2:	ld1	{v25.8b-v26.8b}, [x1], #16
+	eor	 v7.8b,  v7.8b, v25.8b
+	eor	 v8.8b,  v8.8b, v26.8b
+
+3:	sub	w8, w8, #1
+
+	eor3	v29.16b,  v4.16b,  v9.16b, v14.16b
+	eor3	v26.16b,  v1.16b,  v6.16b, v11.16b
+	eor3	v28.16b,  v3.16b,  v8.16b, v13.16b
+	eor3	v25.16b,  v0.16b,  v5.16b, v10.16b
+	eor3	v27.16b,  v2.16b,  v7.16b, v12.16b
+	eor3	v29.16b, v29.16b, v19.16b, v24.16b
+	eor3	v26.16b, v26.16b, v16.16b, v21.16b
+	eor3	v28.16b, v28.16b, v18.16b, v23.16b
+	eor3	v25.16b, v25.16b, v15.16b, v20.16b
+	eor3	v27.16b, v27.16b, v17.16b, v22.16b
+
+	rax1	v30.2d, v29.2d, v26.2d	// bc[0]
+	rax1	v26.2d, v26.2d, v28.2d	// bc[2]
+	rax1	v28.2d, v28.2d, v25.2d	// bc[4]
+	rax1	v25.2d, v25.2d, v27.2d	// bc[1]
+	rax1	v27.2d, v27.2d, v29.2d	// bc[3]
+
+	eor	 v0.16b,  v0.16b, v30.16b
+	xar	 v29.2d,   v1.2d,  v25.2d, (64 - 1)
+	xar	  v1.2d,   v6.2d,  v25.2d, (64 - 44)
+	xar	  v6.2d,   v9.2d,  v28.2d, (64 - 20)
+	xar	  v9.2d,  v22.2d,  v26.2d, (64 - 61)
+	xar	 v22.2d,  v14.2d,  v28.2d, (64 - 39)
+	xar	 v14.2d,  v20.2d,  v30.2d, (64 - 18)
+	xar	 v31.2d,   v2.2d,  v26.2d, (64 - 62)
+	xar	  v2.2d,  v12.2d,  v26.2d, (64 - 43)
+	xar	 v12.2d,  v13.2d,  v27.2d, (64 - 25)
+	xar	 v13.2d,  v19.2d,  v28.2d, (64 - 8)
+	xar	 v19.2d,  v23.2d,  v27.2d, (64 - 56)
+	xar	 v23.2d,  v15.2d,  v30.2d, (64 - 41)
+	xar	 v15.2d,   v4.2d,  v28.2d, (64 - 27)
+	xar	 v28.2d,  v24.2d,  v28.2d, (64 - 14)
+	xar	 v24.2d,  v21.2d,  v25.2d, (64 - 2)
+	xar	  v8.2d,   v8.2d,  v27.2d, (64 - 55)
+	xar	  v4.2d,  v16.2d,  v25.2d, (64 - 45)
+	xar	 v16.2d,   v5.2d,  v30.2d, (64 - 36)
+	xar	  v5.2d,   v3.2d,  v27.2d, (64 - 28)
+	xar	 v27.2d,  v18.2d,  v27.2d, (64 - 21)
+	xar	  v3.2d,  v17.2d,  v26.2d, (64 - 15)
+	xar	 v25.2d,  v11.2d,  v25.2d, (64 - 10)
+	xar	 v26.2d,   v7.2d,  v26.2d, (64 - 6)
+	xar	 v30.2d,  v10.2d,  v30.2d, (64 - 3)
+
+	bcax	v20.16b, v31.16b, v22.16b,  v8.16b
+	bcax	v21.16b,  v8.16b, v23.16b, v22.16b
+	bcax	v22.16b, v22.16b, v24.16b, v23.16b
+	bcax	v23.16b, v23.16b, v31.16b, v24.16b
+	bcax	v24.16b, v24.16b,  v8.16b, v31.16b
+
+	ld1r	{v31.2d}, [x9], #8
+
+	bcax	v17.16b, v25.16b, v19.16b,  v3.16b
+	bcax	v18.16b,  v3.16b, v15.16b, v19.16b
+	bcax	v19.16b, v19.16b, v16.16b, v15.16b
+	bcax	v15.16b, v15.16b, v25.16b, v16.16b
+	bcax	v16.16b, v16.16b,  v3.16b, v25.16b
+
+	bcax	v10.16b, v29.16b, v12.16b, v26.16b
+	bcax	v11.16b, v26.16b, v13.16b, v12.16b
+	bcax	v12.16b, v12.16b, v14.16b, v13.16b
+	bcax	v13.16b, v13.16b, v29.16b, v14.16b
+	bcax	v14.16b, v14.16b, v26.16b, v29.16b
+
+	bcax	 v7.16b, v30.16b,  v9.16b,  v4.16b
+	bcax	 v8.16b,  v4.16b,  v5.16b,  v9.16b
+	bcax	 v9.16b,  v9.16b,  v6.16b,  v5.16b
+	bcax	 v5.16b,  v5.16b, v30.16b,  v6.16b
+	bcax	 v6.16b,  v6.16b,  v4.16b, v30.16b
+
+	bcax	 v3.16b, v27.16b,  v0.16b, v28.16b
+	bcax	 v4.16b, v28.16b,  v1.16b,  v0.16b
+	bcax	 v0.16b,  v0.16b,  v2.16b,  v1.16b
+	bcax	 v1.16b,  v1.16b, v27.16b,  v2.16b
+	bcax	 v2.16b,  v2.16b, v28.16b, v27.16b
+
+	eor	 v0.16b,  v0.16b, v31.16b
+
+	cbnz	w8, 3b
+	cond_yield 4f, x8, x9
+	cbnz	w2, 0b
+
+	/* save state */
+4:	st1	{ v0.1d- v3.1d}, [x0], #32
+	st1	{ v4.1d- v7.1d}, [x0], #32
+	st1	{ v8.1d-v11.1d}, [x0], #32
+	st1	{v12.1d-v15.1d}, [x0], #32
+	st1	{v16.1d-v19.1d}, [x0], #32
+	st1	{v20.1d-v23.1d}, [x0], #32
+	st1	{v24.1d}, [x0]
+	mov	w0, w2
+	ret
+SYM_FUNC_END(sha3_ce_transform)
+
+	.section	".rodata", "a"
+	.align		8
+.Lsha3_rcon:
+	.quad	0x0000000000000001, 0x0000000000008082, 0x800000000000808a
+	.quad	0x8000000080008000, 0x000000000000808b, 0x0000000080000001
+	.quad	0x8000000080008081, 0x8000000000008009, 0x000000000000008a
+	.quad	0x0000000000000088, 0x0000000080008009, 0x000000008000000a
+	.quad	0x000000008000808b, 0x800000000000008b, 0x8000000000008089
+	.quad	0x8000000000008003, 0x8000000000008002, 0x8000000000000080
+	.quad	0x000000000000800a, 0x800000008000000a, 0x8000000080008081
+	.quad	0x8000000000008080, 0x0000000080000001, 0x8000000080008008
diff --git a/arch/arm64/crypto/sha3-ce-glue.c b/arch/arm64/crypto/sha3-ce-glue.c
new file mode 100644
index 000000000..250e1377c
--- /dev/null
+++ b/arch/arm64/crypto/sha3-ce-glue.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sha3-ce-glue.c - core SHA-3 transform using v8.2 Crypto Extensions
+ *
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sha3.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("SHA3 secure hash using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha3-224");
+MODULE_ALIAS_CRYPTO("sha3-256");
+MODULE_ALIAS_CRYPTO("sha3-384");
+MODULE_ALIAS_CRYPTO("sha3-512");
+
+asmlinkage int sha3_ce_transform(u64 *st, const u8 *data, int blocks,
+				 int md_len);
+
+static int sha3_update(struct shash_desc *desc, const u8 *data,
+		       unsigned int len)
+{
+	struct sha3_state *sctx = shash_desc_ctx(desc);
+	unsigned int digest_size = crypto_shash_digestsize(desc->tfm);
+
+	if (!crypto_simd_usable())
+		return crypto_sha3_update(desc, data, len);
+
+	if ((sctx->partial + len) >= sctx->rsiz) {
+		int blocks;
+
+		if (sctx->partial) {
+			int p = sctx->rsiz - sctx->partial;
+
+			memcpy(sctx->buf + sctx->partial, data, p);
+			kernel_neon_begin();
+			sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size);
+			kernel_neon_end();
+
+			data += p;
+			len -= p;
+			sctx->partial = 0;
+		}
+
+		blocks = len / sctx->rsiz;
+		len %= sctx->rsiz;
+
+		while (blocks) {
+			int rem;
+
+			kernel_neon_begin();
+			rem = sha3_ce_transform(sctx->st, data, blocks,
+						digest_size);
+			kernel_neon_end();
+			data += (blocks - rem) * sctx->rsiz;
+			blocks = rem;
+		}
+	}
+
+	if (len) {
+		memcpy(sctx->buf + sctx->partial, data, len);
+		sctx->partial += len;
+	}
+	return 0;
+}
+
+static int sha3_final(struct shash_desc *desc, u8 *out)
+{
+	struct sha3_state *sctx = shash_desc_ctx(desc);
+	unsigned int digest_size = crypto_shash_digestsize(desc->tfm);
+	__le64 *digest = (__le64 *)out;
+	int i;
+
+	if (!crypto_simd_usable())
+		return crypto_sha3_final(desc, out);
+
+	sctx->buf[sctx->partial++] = 0x06;
+	memset(sctx->buf + sctx->partial, 0, sctx->rsiz - sctx->partial);
+	sctx->buf[sctx->rsiz - 1] |= 0x80;
+
+	kernel_neon_begin();
+	sha3_ce_transform(sctx->st, sctx->buf, 1, digest_size);
+	kernel_neon_end();
+
+	for (i = 0; i < digest_size / 8; i++)
+		put_unaligned_le64(sctx->st[i], digest++);
+
+	if (digest_size & 4)
+		put_unaligned_le32(sctx->st[i], (__le32 *)digest);
+
+	memzero_explicit(sctx, sizeof(*sctx));
+	return 0;
+}
+
+static struct shash_alg algs[] = { {
+	.digestsize		= SHA3_224_DIGEST_SIZE,
+	.init			= crypto_sha3_init,
+	.update			= sha3_update,
+	.final			= sha3_final,
+	.descsize		= sizeof(struct sha3_state),
+	.base.cra_name		= "sha3-224",
+	.base.cra_driver_name	= "sha3-224-ce",
+	.base.cra_blocksize	= SHA3_224_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+}, {
+	.digestsize		= SHA3_256_DIGEST_SIZE,
+	.init			= crypto_sha3_init,
+	.update			= sha3_update,
+	.final			= sha3_final,
+	.descsize		= sizeof(struct sha3_state),
+	.base.cra_name		= "sha3-256",
+	.base.cra_driver_name	= "sha3-256-ce",
+	.base.cra_blocksize	= SHA3_256_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+}, {
+	.digestsize		= SHA3_384_DIGEST_SIZE,
+	.init			= crypto_sha3_init,
+	.update			= sha3_update,
+	.final			= sha3_final,
+	.descsize		= sizeof(struct sha3_state),
+	.base.cra_name		= "sha3-384",
+	.base.cra_driver_name	= "sha3-384-ce",
+	.base.cra_blocksize	= SHA3_384_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+}, {
+	.digestsize		= SHA3_512_DIGEST_SIZE,
+	.init			= crypto_sha3_init,
+	.update			= sha3_update,
+	.final			= sha3_final,
+	.descsize		= sizeof(struct sha3_state),
+	.base.cra_name		= "sha3-512",
+	.base.cra_driver_name	= "sha3-512-ce",
+	.base.cra_blocksize	= SHA3_512_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+} };
+
+static int __init sha3_neon_mod_init(void)
+{
+	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
+}
+
+static void __exit sha3_neon_mod_fini(void)
+{
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_cpu_feature_match(SHA3, sha3_neon_mod_init);
+module_exit(sha3_neon_mod_fini);
diff --git a/arch/arm64/crypto/sha512-armv8.pl b/arch/arm64/crypto/sha512-armv8.pl
new file mode 100644
index 000000000..35ec9ae99
--- /dev/null
+++ b/arch/arm64/crypto/sha512-armv8.pl
@@ -0,0 +1,786 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0
+
+# This code is taken from the OpenSSL project but the author (Andy Polyakov)
+# has relicensed it under the GPLv2. Therefore this program is free software;
+# you can redistribute it and/or modify it under the terms of the GNU General
+# Public License version 2 as published by the Free Software Foundation.
+#
+# The original headers, including the original license headers, are
+# included below for completeness.
+
+# Copyright 2014-2016 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the OpenSSL license (the "License").  You may not use
+# this file except in compliance with the License.  You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# SHA256/512 for ARMv8.
+#
+# Performance in cycles per processed byte and improvement coefficient
+# over code generated with "default" compiler:
+#
+#		SHA256-hw	SHA256(*)	SHA512
+# Apple A7	1.97		10.5 (+33%)	6.73 (-1%(**))
+# Cortex-A53	2.38		15.5 (+115%)	10.0 (+150%(***))
+# Cortex-A57	2.31		11.6 (+86%)	7.51 (+260%(***))
+# Denver	2.01		10.5 (+26%)	6.70 (+8%)
+# X-Gene			20.0 (+100%)	12.8 (+300%(***))
+# Mongoose	2.36		13.0 (+50%)	8.36 (+33%)
+#
+# (*)	Software SHA256 results are of lesser relevance, presented
+#	mostly for informational purposes.
+# (**)	The result is a trade-off: it's possible to improve it by
+#	10% (or by 1 cycle per round), but at the cost of 20% loss
+#	on Cortex-A53 (or by 4 cycles per round).
+# (***)	Super-impressive coefficients over gcc-generated code are
+#	indication of some compiler "pathology", most notably code
+#	generated with -mgeneral-regs-only is significantly faster
+#	and the gap is only 40-90%.
+#
+# October 2016.
+#
+# Originally it was reckoned that it makes no sense to implement NEON
+# version of SHA256 for 64-bit processors. This is because performance
+# improvement on most wide-spread Cortex-A5x processors was observed
+# to be marginal, same on Cortex-A53 and ~10% on A57. But then it was
+# observed that 32-bit NEON SHA256 performs significantly better than
+# 64-bit scalar version on *some* of the more recent processors. As
+# result 64-bit NEON version of SHA256 was added to provide best
+# all-round performance. For example it executes ~30% faster on X-Gene
+# and Mongoose. [For reference, NEON version of SHA512 is bound to
+# deliver much less improvement, likely *negative* on Cortex-A5x.
+# Which is why NEON support is limited to SHA256.]
+
+$output=pop;
+$flavour=pop;
+
+if ($flavour && $flavour ne "void") {
+    $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+    ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or
+    ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or
+    die "can't locate arm-xlate.pl";
+
+    open OUT,"| \"$^X\" $xlate $flavour $output";
+    *STDOUT=*OUT;
+} else {
+    open STDOUT,">$output";
+}
+
+if ($output =~ /512/) {
+	$BITS=512;
+	$SZ=8;
+	@Sigma0=(28,34,39);
+	@Sigma1=(14,18,41);
+	@sigma0=(1,  8, 7);
+	@sigma1=(19,61, 6);
+	$rounds=80;
+	$reg_t="x";
+} else {
+	$BITS=256;
+	$SZ=4;
+	@Sigma0=( 2,13,22);
+	@Sigma1=( 6,11,25);
+	@sigma0=( 7,18, 3);
+	@sigma1=(17,19,10);
+	$rounds=64;
+	$reg_t="w";
+}
+
+$func="sha${BITS}_block_data_order";
+
+($ctx,$inp,$num,$Ktbl)=map("x$_",(0..2,30));
+
+@X=map("$reg_t$_",(3..15,0..2));
+@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("$reg_t$_",(20..27));
+($t0,$t1,$t2,$t3)=map("$reg_t$_",(16,17,19,28));
+
+sub BODY_00_xx {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+my $j=($i+1)&15;
+my ($T0,$T1,$T2)=(@X[($i-8)&15],@X[($i-9)&15],@X[($i-10)&15]);
+   $T0=@X[$i+3] if ($i<11);
+
+$code.=<<___	if ($i<16);
+#ifndef	__AARCH64EB__
+	rev	@X[$i],@X[$i]			// $i
+#endif
+___
+$code.=<<___	if ($i<13 && ($i&1));
+	ldp	@X[$i+1],@X[$i+2],[$inp],#2*$SZ
+___
+$code.=<<___	if ($i==13);
+	ldp	@X[14],@X[15],[$inp]
+___
+$code.=<<___	if ($i>=14);
+	ldr	@X[($i-11)&15],[sp,#`$SZ*(($i-11)%4)`]
+___
+$code.=<<___	if ($i>0 && $i<16);
+	add	$a,$a,$t1			// h+=Sigma0(a)
+___
+$code.=<<___	if ($i>=11);
+	str	@X[($i-8)&15],[sp,#`$SZ*(($i-8)%4)`]
+___
+# While ARMv8 specifies merged rotate-n-logical operation such as
+# 'eor x,y,z,ror#n', it was found to negatively affect performance
+# on Apple A7. The reason seems to be that it requires even 'y' to
+# be available earlier. This means that such merged instruction is
+# not necessarily best choice on critical path... On the other hand
+# Cortex-A5x handles merged instructions much better than disjoint
+# rotate and logical... See (**) footnote above.
+$code.=<<___	if ($i<15);
+	ror	$t0,$e,#$Sigma1[0]
+	add	$h,$h,$t2			// h+=K[i]
+	eor	$T0,$e,$e,ror#`$Sigma1[2]-$Sigma1[1]`
+	and	$t1,$f,$e
+	bic	$t2,$g,$e
+	add	$h,$h,@X[$i&15]			// h+=X[i]
+	orr	$t1,$t1,$t2			// Ch(e,f,g)
+	eor	$t2,$a,$b			// a^b, b^c in next round
+	eor	$t0,$t0,$T0,ror#$Sigma1[1]	// Sigma1(e)
+	ror	$T0,$a,#$Sigma0[0]
+	add	$h,$h,$t1			// h+=Ch(e,f,g)
+	eor	$t1,$a,$a,ror#`$Sigma0[2]-$Sigma0[1]`
+	add	$h,$h,$t0			// h+=Sigma1(e)
+	and	$t3,$t3,$t2			// (b^c)&=(a^b)
+	add	$d,$d,$h			// d+=h
+	eor	$t3,$t3,$b			// Maj(a,b,c)
+	eor	$t1,$T0,$t1,ror#$Sigma0[1]	// Sigma0(a)
+	add	$h,$h,$t3			// h+=Maj(a,b,c)
+	ldr	$t3,[$Ktbl],#$SZ		// *K++, $t2 in next round
+	//add	$h,$h,$t1			// h+=Sigma0(a)
+___
+$code.=<<___	if ($i>=15);
+	ror	$t0,$e,#$Sigma1[0]
+	add	$h,$h,$t2			// h+=K[i]
+	ror	$T1,@X[($j+1)&15],#$sigma0[0]
+	and	$t1,$f,$e
+	ror	$T2,@X[($j+14)&15],#$sigma1[0]
+	bic	$t2,$g,$e
+	ror	$T0,$a,#$Sigma0[0]
+	add	$h,$h,@X[$i&15]			// h+=X[i]
+	eor	$t0,$t0,$e,ror#$Sigma1[1]
+	eor	$T1,$T1,@X[($j+1)&15],ror#$sigma0[1]
+	orr	$t1,$t1,$t2			// Ch(e,f,g)
+	eor	$t2,$a,$b			// a^b, b^c in next round
+	eor	$t0,$t0,$e,ror#$Sigma1[2]	// Sigma1(e)
+	eor	$T0,$T0,$a,ror#$Sigma0[1]
+	add	$h,$h,$t1			// h+=Ch(e,f,g)
+	and	$t3,$t3,$t2			// (b^c)&=(a^b)
+	eor	$T2,$T2,@X[($j+14)&15],ror#$sigma1[1]
+	eor	$T1,$T1,@X[($j+1)&15],lsr#$sigma0[2]	// sigma0(X[i+1])
+	add	$h,$h,$t0			// h+=Sigma1(e)
+	eor	$t3,$t3,$b			// Maj(a,b,c)
+	eor	$t1,$T0,$a,ror#$Sigma0[2]	// Sigma0(a)
+	eor	$T2,$T2,@X[($j+14)&15],lsr#$sigma1[2]	// sigma1(X[i+14])
+	add	@X[$j],@X[$j],@X[($j+9)&15]
+	add	$d,$d,$h			// d+=h
+	add	$h,$h,$t3			// h+=Maj(a,b,c)
+	ldr	$t3,[$Ktbl],#$SZ		// *K++, $t2 in next round
+	add	@X[$j],@X[$j],$T1
+	add	$h,$h,$t1			// h+=Sigma0(a)
+	add	@X[$j],@X[$j],$T2
+___
+	($t2,$t3)=($t3,$t2);
+}
+
+$code.=<<___;
+#ifndef	__KERNEL__
+# include "arm_arch.h"
+#endif
+
+.text
+
+.extern	OPENSSL_armcap_P
+.globl	$func
+.type	$func,%function
+.align	6
+$func:
+___
+$code.=<<___	if ($SZ==4);
+#ifndef	__KERNEL__
+# ifdef	__ILP32__
+	ldrsw	x16,.LOPENSSL_armcap_P
+# else
+	ldr	x16,.LOPENSSL_armcap_P
+# endif
+	adr	x17,.LOPENSSL_armcap_P
+	add	x16,x16,x17
+	ldr	w16,[x16]
+	tst	w16,#ARMV8_SHA256
+	b.ne	.Lv8_entry
+	tst	w16,#ARMV7_NEON
+	b.ne	.Lneon_entry
+#endif
+___
+$code.=<<___;
+	stp	x29,x30,[sp,#-128]!
+	add	x29,sp,#0
+
+	stp	x19,x20,[sp,#16]
+	stp	x21,x22,[sp,#32]
+	stp	x23,x24,[sp,#48]
+	stp	x25,x26,[sp,#64]
+	stp	x27,x28,[sp,#80]
+	sub	sp,sp,#4*$SZ
+
+	ldp	$A,$B,[$ctx]				// load context
+	ldp	$C,$D,[$ctx,#2*$SZ]
+	ldp	$E,$F,[$ctx,#4*$SZ]
+	add	$num,$inp,$num,lsl#`log(16*$SZ)/log(2)`	// end of input
+	ldp	$G,$H,[$ctx,#6*$SZ]
+	adr	$Ktbl,.LK$BITS
+	stp	$ctx,$num,[x29,#96]
+
+.Loop:
+	ldp	@X[0],@X[1],[$inp],#2*$SZ
+	ldr	$t2,[$Ktbl],#$SZ			// *K++
+	eor	$t3,$B,$C				// magic seed
+	str	$inp,[x29,#112]
+___
+for ($i=0;$i<16;$i++)	{ &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
+$code.=".Loop_16_xx:\n";
+for (;$i<32;$i++)	{ &BODY_00_xx($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+	cbnz	$t2,.Loop_16_xx
+
+	ldp	$ctx,$num,[x29,#96]
+	ldr	$inp,[x29,#112]
+	sub	$Ktbl,$Ktbl,#`$SZ*($rounds+1)`		// rewind
+
+	ldp	@X[0],@X[1],[$ctx]
+	ldp	@X[2],@X[3],[$ctx,#2*$SZ]
+	add	$inp,$inp,#14*$SZ			// advance input pointer
+	ldp	@X[4],@X[5],[$ctx,#4*$SZ]
+	add	$A,$A,@X[0]
+	ldp	@X[6],@X[7],[$ctx,#6*$SZ]
+	add	$B,$B,@X[1]
+	add	$C,$C,@X[2]
+	add	$D,$D,@X[3]
+	stp	$A,$B,[$ctx]
+	add	$E,$E,@X[4]
+	add	$F,$F,@X[5]
+	stp	$C,$D,[$ctx,#2*$SZ]
+	add	$G,$G,@X[6]
+	add	$H,$H,@X[7]
+	cmp	$inp,$num
+	stp	$E,$F,[$ctx,#4*$SZ]
+	stp	$G,$H,[$ctx,#6*$SZ]
+	b.ne	.Loop
+
+	ldp	x19,x20,[x29,#16]
+	add	sp,sp,#4*$SZ
+	ldp	x21,x22,[x29,#32]
+	ldp	x23,x24,[x29,#48]
+	ldp	x25,x26,[x29,#64]
+	ldp	x27,x28,[x29,#80]
+	ldp	x29,x30,[sp],#128
+	ret
+.size	$func,.-$func
+
+.align	6
+.type	.LK$BITS,%object
+.LK$BITS:
+___
+$code.=<<___ if ($SZ==8);
+	.quad	0x428a2f98d728ae22,0x7137449123ef65cd
+	.quad	0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
+	.quad	0x3956c25bf348b538,0x59f111f1b605d019
+	.quad	0x923f82a4af194f9b,0xab1c5ed5da6d8118
+	.quad	0xd807aa98a3030242,0x12835b0145706fbe
+	.quad	0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
+	.quad	0x72be5d74f27b896f,0x80deb1fe3b1696b1
+	.quad	0x9bdc06a725c71235,0xc19bf174cf692694
+	.quad	0xe49b69c19ef14ad2,0xefbe4786384f25e3
+	.quad	0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
+	.quad	0x2de92c6f592b0275,0x4a7484aa6ea6e483
+	.quad	0x5cb0a9dcbd41fbd4,0x76f988da831153b5
+	.quad	0x983e5152ee66dfab,0xa831c66d2db43210
+	.quad	0xb00327c898fb213f,0xbf597fc7beef0ee4
+	.quad	0xc6e00bf33da88fc2,0xd5a79147930aa725
+	.quad	0x06ca6351e003826f,0x142929670a0e6e70
+	.quad	0x27b70a8546d22ffc,0x2e1b21385c26c926
+	.quad	0x4d2c6dfc5ac42aed,0x53380d139d95b3df
+	.quad	0x650a73548baf63de,0x766a0abb3c77b2a8
+	.quad	0x81c2c92e47edaee6,0x92722c851482353b
+	.quad	0xa2bfe8a14cf10364,0xa81a664bbc423001
+	.quad	0xc24b8b70d0f89791,0xc76c51a30654be30
+	.quad	0xd192e819d6ef5218,0xd69906245565a910
+	.quad	0xf40e35855771202a,0x106aa07032bbd1b8
+	.quad	0x19a4c116b8d2d0c8,0x1e376c085141ab53
+	.quad	0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
+	.quad	0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
+	.quad	0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
+	.quad	0x748f82ee5defb2fc,0x78a5636f43172f60
+	.quad	0x84c87814a1f0ab72,0x8cc702081a6439ec
+	.quad	0x90befffa23631e28,0xa4506cebde82bde9
+	.quad	0xbef9a3f7b2c67915,0xc67178f2e372532b
+	.quad	0xca273eceea26619c,0xd186b8c721c0c207
+	.quad	0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
+	.quad	0x06f067aa72176fba,0x0a637dc5a2c898a6
+	.quad	0x113f9804bef90dae,0x1b710b35131c471b
+	.quad	0x28db77f523047d84,0x32caab7b40c72493
+	.quad	0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
+	.quad	0x4cc5d4becb3e42b6,0x597f299cfc657e2a
+	.quad	0x5fcb6fab3ad6faec,0x6c44198c4a475817
+	.quad	0	// terminator
+___
+$code.=<<___ if ($SZ==4);
+	.long	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
+	.long	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
+	.long	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
+	.long	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
+	.long	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
+	.long	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
+	.long	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
+	.long	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
+	.long	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
+	.long	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
+	.long	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
+	.long	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
+	.long	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
+	.long	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
+	.long	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
+	.long	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
+	.long	0	//terminator
+___
+$code.=<<___;
+.size	.LK$BITS,.-.LK$BITS
+#ifndef	__KERNEL__
+.align	3
+.LOPENSSL_armcap_P:
+# ifdef	__ILP32__
+	.long	OPENSSL_armcap_P-.
+# else
+	.quad	OPENSSL_armcap_P-.
+# endif
+#endif
+.asciz	"SHA$BITS block transform for ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
+.align	2
+___
+
+if ($SZ==4) {
+my $Ktbl="x3";
+
+my ($ABCD,$EFGH,$abcd)=map("v$_.16b",(0..2));
+my @MSG=map("v$_.16b",(4..7));
+my ($W0,$W1)=("v16.4s","v17.4s");
+my ($ABCD_SAVE,$EFGH_SAVE)=("v18.16b","v19.16b");
+
+$code.=<<___;
+#ifndef	__KERNEL__
+.type	sha256_block_armv8,%function
+.align	6
+sha256_block_armv8:
+.Lv8_entry:
+	stp		x29,x30,[sp,#-16]!
+	add		x29,sp,#0
+
+	ld1.32		{$ABCD,$EFGH},[$ctx]
+	adr		$Ktbl,.LK256
+
+.Loop_hw:
+	ld1		{@MSG[0]-@MSG[3]},[$inp],#64
+	sub		$num,$num,#1
+	ld1.32		{$W0},[$Ktbl],#16
+	rev32		@MSG[0],@MSG[0]
+	rev32		@MSG[1],@MSG[1]
+	rev32		@MSG[2],@MSG[2]
+	rev32		@MSG[3],@MSG[3]
+	orr		$ABCD_SAVE,$ABCD,$ABCD		// offload
+	orr		$EFGH_SAVE,$EFGH,$EFGH
+___
+for($i=0;$i<12;$i++) {
+$code.=<<___;
+	ld1.32		{$W1},[$Ktbl],#16
+	add.i32		$W0,$W0,@MSG[0]
+	sha256su0	@MSG[0],@MSG[1]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W0
+	sha256h2	$EFGH,$abcd,$W0
+	sha256su1	@MSG[0],@MSG[2],@MSG[3]
+___
+	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
+}
+$code.=<<___;
+	ld1.32		{$W1},[$Ktbl],#16
+	add.i32		$W0,$W0,@MSG[0]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W0
+	sha256h2	$EFGH,$abcd,$W0
+
+	ld1.32		{$W0},[$Ktbl],#16
+	add.i32		$W1,$W1,@MSG[1]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W1
+	sha256h2	$EFGH,$abcd,$W1
+
+	ld1.32		{$W1},[$Ktbl]
+	add.i32		$W0,$W0,@MSG[2]
+	sub		$Ktbl,$Ktbl,#$rounds*$SZ-16	// rewind
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W0
+	sha256h2	$EFGH,$abcd,$W0
+
+	add.i32		$W1,$W1,@MSG[3]
+	orr		$abcd,$ABCD,$ABCD
+	sha256h		$ABCD,$EFGH,$W1
+	sha256h2	$EFGH,$abcd,$W1
+
+	add.i32		$ABCD,$ABCD,$ABCD_SAVE
+	add.i32		$EFGH,$EFGH,$EFGH_SAVE
+
+	cbnz		$num,.Loop_hw
+
+	st1.32		{$ABCD,$EFGH},[$ctx]
+
+	ldr		x29,[sp],#16
+	ret
+.size	sha256_block_armv8,.-sha256_block_armv8
+#endif
+___
+}
+
+if ($SZ==4) {	######################################### NEON stuff #
+# You'll surely note a lot of similarities with sha256-armv4 module,
+# and of course it's not a coincidence. sha256-armv4 was used as
+# initial template, but was adapted for ARMv8 instruction set and
+# extensively re-tuned for all-round performance.
+
+my @V = ($A,$B,$C,$D,$E,$F,$G,$H) = map("w$_",(3..10));
+my ($t0,$t1,$t2,$t3,$t4) = map("w$_",(11..15));
+my $Ktbl="x16";
+my $Xfer="x17";
+my @X = map("q$_",(0..3));
+my ($T0,$T1,$T2,$T3,$T4,$T5,$T6,$T7) = map("q$_",(4..7,16..19));
+my $j=0;
+
+sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+  my $arg = pop;
+    $arg = "#$arg" if ($arg*1 eq $arg);
+    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+sub Dscalar { shift =~ m|[qv]([0-9]+)|?"d$1":""; }
+sub Dlo     { shift =~ m|[qv]([0-9]+)|?"v$1.d[0]":""; }
+sub Dhi     { shift =~ m|[qv]([0-9]+)|?"v$1.d[1]":""; }
+
+sub Xupdate()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+	&ext_8		($T0,@X[0],@X[1],4);	# X[1..4]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ext_8		($T3,@X[2],@X[3],4);	# X[9..12]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&mov		(&Dscalar($T7),&Dhi(@X[3]));	# X[14..15]
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ushr_32	($T2,$T0,$sigma0[0]);
+	 eval(shift(@insns));
+	&ushr_32	($T1,$T0,$sigma0[2]);
+	 eval(shift(@insns));
+	&add_32 	(@X[0],@X[0],$T3);	# X[0..3] += X[9..12]
+	 eval(shift(@insns));
+	&sli_32		($T2,$T0,32-$sigma0[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ushr_32	($T3,$T0,$sigma0[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&eor_8		($T1,$T1,$T2);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&sli_32		($T3,$T0,32-$sigma0[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T4,$T7,$sigma1[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&eor_8		($T1,$T1,$T3);		# sigma0(X[1..4])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_32	($T4,$T7,32-$sigma1[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T5,$T7,$sigma1[2]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T3,$T7,$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		(@X[0],@X[0],$T1);	# X[0..3] += sigma0(X[1..4])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_u32	($T3,$T7,32-$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &eor_8	($T5,$T5,$T4);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &eor_8	($T5,$T5,$T3);		# sigma1(X[14..15])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		(@X[0],@X[0],$T5);	# X[0..1] += sigma1(X[14..15])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &ushr_32	($T6,@X[0],$sigma1[0]);
+	 eval(shift(@insns));
+	  &ushr_32	($T7,@X[0],$sigma1[2]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_32	($T6,@X[0],32-$sigma1[0]);
+	 eval(shift(@insns));
+	  &ushr_32	($T5,@X[0],$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &eor_8	($T7,$T7,$T6);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	  &sli_32	($T5,@X[0],32-$sigma1[1]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ld1_32		("{$T0}","[$Ktbl], #16");
+	 eval(shift(@insns));
+	  &eor_8	($T7,$T7,$T5);		# sigma1(X[16..17])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&eor_8		($T5,$T5,$T5);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&mov		(&Dhi($T5), &Dlo($T7));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		(@X[0],@X[0],$T5);	# X[2..3] += sigma1(X[16..17])
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		($T0,$T0,@X[0]);
+	 while($#insns>=1) { eval(shift(@insns)); }
+	&st1_32		("{$T0}","[$Xfer], #16");
+	 eval(shift(@insns));
+
+	push(@X,shift(@X));		# "rotate" X[]
+}
+
+sub Xpreload()
+{ use integer;
+  my $body = shift;
+  my @insns = (&$body,&$body,&$body,&$body);
+  my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ld1_8		("{@X[0]}","[$inp],#16");
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&ld1_32		("{$T0}","[$Ktbl],#16");
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&rev32		(@X[0],@X[0]);
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	 eval(shift(@insns));
+	&add_32		($T0,$T0,@X[0]);
+	 foreach (@insns) { eval; }	# remaining instructions
+	&st1_32		("{$T0}","[$Xfer], #16");
+
+	push(@X,shift(@X));		# "rotate" X[]
+}
+
+sub body_00_15 () {
+	(
+	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
+	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
+	'&add	($a,$a,$t4);'.			# h+=Sigma0(a) from the past
+	'&and	($t1,$f,$e)',
+	'&bic	($t4,$g,$e)',
+	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
+	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
+	'&orr	($t1,$t1,$t4)',			# Ch(e,f,g)
+	'&eor	($t0,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
+	'&eor	($t4,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
+	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
+	'&ror	($t0,$t0,"#$Sigma1[0]")',
+	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
+	'&eor	($t4,$t4,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
+	'&add	($h,$h,$t0)',			# h+=Sigma1(e)
+	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
+	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
+	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
+	'&ror	($t4,$t4,"#$Sigma0[0]")',
+	'&add	($d,$d,$h)',			# d+=h
+	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
+	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
+	)
+}
+
+$code.=<<___;
+#ifdef	__KERNEL__
+.globl	sha256_block_neon
+#endif
+.type	sha256_block_neon,%function
+.align	4
+sha256_block_neon:
+.Lneon_entry:
+	stp	x29, x30, [sp, #-16]!
+	mov	x29, sp
+	sub	sp,sp,#16*4
+
+	adr	$Ktbl,.LK256
+	add	$num,$inp,$num,lsl#6	// len to point at the end of inp
+
+	ld1.8	{@X[0]},[$inp], #16
+	ld1.8	{@X[1]},[$inp], #16
+	ld1.8	{@X[2]},[$inp], #16
+	ld1.8	{@X[3]},[$inp], #16
+	ld1.32	{$T0},[$Ktbl], #16
+	ld1.32	{$T1},[$Ktbl], #16
+	ld1.32	{$T2},[$Ktbl], #16
+	ld1.32	{$T3},[$Ktbl], #16
+	rev32	@X[0],@X[0]		// yes, even on
+	rev32	@X[1],@X[1]		// big-endian
+	rev32	@X[2],@X[2]
+	rev32	@X[3],@X[3]
+	mov	$Xfer,sp
+	add.32	$T0,$T0,@X[0]
+	add.32	$T1,$T1,@X[1]
+	add.32	$T2,$T2,@X[2]
+	st1.32	{$T0-$T1},[$Xfer], #32
+	add.32	$T3,$T3,@X[3]
+	st1.32	{$T2-$T3},[$Xfer]
+	sub	$Xfer,$Xfer,#32
+
+	ldp	$A,$B,[$ctx]
+	ldp	$C,$D,[$ctx,#8]
+	ldp	$E,$F,[$ctx,#16]
+	ldp	$G,$H,[$ctx,#24]
+	ldr	$t1,[sp,#0]
+	mov	$t2,wzr
+	eor	$t3,$B,$C
+	mov	$t4,wzr
+	b	.L_00_48
+
+.align	4
+.L_00_48:
+___
+	&Xupdate(\&body_00_15);
+	&Xupdate(\&body_00_15);
+	&Xupdate(\&body_00_15);
+	&Xupdate(\&body_00_15);
+$code.=<<___;
+	cmp	$t1,#0				// check for K256 terminator
+	ldr	$t1,[sp,#0]
+	sub	$Xfer,$Xfer,#64
+	bne	.L_00_48
+
+	sub	$Ktbl,$Ktbl,#256		// rewind $Ktbl
+	cmp	$inp,$num
+	mov	$Xfer, #64
+	csel	$Xfer, $Xfer, xzr, eq
+	sub	$inp,$inp,$Xfer			// avoid SEGV
+	mov	$Xfer,sp
+___
+	&Xpreload(\&body_00_15);
+	&Xpreload(\&body_00_15);
+	&Xpreload(\&body_00_15);
+	&Xpreload(\&body_00_15);
+$code.=<<___;
+	add	$A,$A,$t4			// h+=Sigma0(a) from the past
+	ldp	$t0,$t1,[$ctx,#0]
+	add	$A,$A,$t2			// h+=Maj(a,b,c) from the past
+	ldp	$t2,$t3,[$ctx,#8]
+	add	$A,$A,$t0			// accumulate
+	add	$B,$B,$t1
+	ldp	$t0,$t1,[$ctx,#16]
+	add	$C,$C,$t2
+	add	$D,$D,$t3
+	ldp	$t2,$t3,[$ctx,#24]
+	add	$E,$E,$t0
+	add	$F,$F,$t1
+	 ldr	$t1,[sp,#0]
+	stp	$A,$B,[$ctx,#0]
+	add	$G,$G,$t2
+	 mov	$t2,wzr
+	stp	$C,$D,[$ctx,#8]
+	add	$H,$H,$t3
+	stp	$E,$F,[$ctx,#16]
+	 eor	$t3,$B,$C
+	stp	$G,$H,[$ctx,#24]
+	 mov	$t4,wzr
+	 mov	$Xfer,sp
+	b.ne	.L_00_48
+
+	ldr	x29,[x29]
+	add	sp,sp,#16*4+16
+	ret
+.size	sha256_block_neon,.-sha256_block_neon
+___
+}
+
+$code.=<<___;
+#ifndef	__KERNEL__
+.comm	OPENSSL_armcap_P,4,4
+#endif
+___
+
+{   my  %opcode = (
+	"sha256h"	=> 0x5e004000,	"sha256h2"	=> 0x5e005000,
+	"sha256su0"	=> 0x5e282800,	"sha256su1"	=> 0x5e006000	);
+
+    sub unsha256 {
+	my ($mnemonic,$arg)=@_;
+
+	$arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)[^,]*(?:,\s*[qv]([0-9]+))?/o
+	&&
+	sprintf ".inst\t0x%08x\t//%s %s",
+			$opcode{$mnemonic}|$1|($2<<5)|($3<<16),
+			$mnemonic,$arg;
+    }
+}
+
+open SELF,$0;
+while(<SELF>) {
+        next if (/^#!/);
+        last if (!s/^#/\/\// and !/^$/);
+        print;
+}
+close SELF;
+
+foreach(split("\n",$code)) {
+
+	s/\`([^\`]*)\`/eval($1)/ge;
+
+	s/\b(sha256\w+)\s+([qv].*)/unsha256($1,$2)/ge;
+
+	s/\bq([0-9]+)\b/v$1.16b/g;		# old->new registers
+
+	s/\.[ui]?8(\s)/$1/;
+	s/\.\w?32\b//		and s/\.16b/\.4s/g;
+	m/(ld|st)1[^\[]+\[0\]/	and s/\.4s/\.s/g;
+
+	print $_,"\n";
+}
+
+close STDOUT;
diff --git a/arch/arm64/crypto/sha512-ce-core.S b/arch/arm64/crypto/sha512-ce-core.S
new file mode 100644
index 000000000..b6a3a36e1
--- /dev/null
+++ b/arch/arm64/crypto/sha512-ce-core.S
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * sha512-ce-core.S - core SHA-384/SHA-512 transform using v8 Crypto Extensions
+ *
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.irp		b,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
+	.set		.Lq\b, \b
+	.set		.Lv\b\().2d, \b
+	.endr
+
+	.macro		sha512h, rd, rn, rm
+	.inst		0xce608000 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
+	.endm
+
+	.macro		sha512h2, rd, rn, rm
+	.inst		0xce608400 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
+	.endm
+
+	.macro		sha512su0, rd, rn
+	.inst		0xcec08000 | .L\rd | (.L\rn << 5)
+	.endm
+
+	.macro		sha512su1, rd, rn, rm
+	.inst		0xce608800 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
+	.endm
+
+	/*
+	 * The SHA-512 round constants
+	 */
+	.section	".rodata", "a"
+	.align		4
+.Lsha512_rcon:
+	.quad		0x428a2f98d728ae22, 0x7137449123ef65cd
+	.quad		0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc
+	.quad		0x3956c25bf348b538, 0x59f111f1b605d019
+	.quad		0x923f82a4af194f9b, 0xab1c5ed5da6d8118
+	.quad		0xd807aa98a3030242, 0x12835b0145706fbe
+	.quad		0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2
+	.quad		0x72be5d74f27b896f, 0x80deb1fe3b1696b1
+	.quad		0x9bdc06a725c71235, 0xc19bf174cf692694
+	.quad		0xe49b69c19ef14ad2, 0xefbe4786384f25e3
+	.quad		0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65
+	.quad		0x2de92c6f592b0275, 0x4a7484aa6ea6e483
+	.quad		0x5cb0a9dcbd41fbd4, 0x76f988da831153b5
+	.quad		0x983e5152ee66dfab, 0xa831c66d2db43210
+	.quad		0xb00327c898fb213f, 0xbf597fc7beef0ee4
+	.quad		0xc6e00bf33da88fc2, 0xd5a79147930aa725
+	.quad		0x06ca6351e003826f, 0x142929670a0e6e70
+	.quad		0x27b70a8546d22ffc, 0x2e1b21385c26c926
+	.quad		0x4d2c6dfc5ac42aed, 0x53380d139d95b3df
+	.quad		0x650a73548baf63de, 0x766a0abb3c77b2a8
+	.quad		0x81c2c92e47edaee6, 0x92722c851482353b
+	.quad		0xa2bfe8a14cf10364, 0xa81a664bbc423001
+	.quad		0xc24b8b70d0f89791, 0xc76c51a30654be30
+	.quad		0xd192e819d6ef5218, 0xd69906245565a910
+	.quad		0xf40e35855771202a, 0x106aa07032bbd1b8
+	.quad		0x19a4c116b8d2d0c8, 0x1e376c085141ab53
+	.quad		0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8
+	.quad		0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb
+	.quad		0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3
+	.quad		0x748f82ee5defb2fc, 0x78a5636f43172f60
+	.quad		0x84c87814a1f0ab72, 0x8cc702081a6439ec
+	.quad		0x90befffa23631e28, 0xa4506cebde82bde9
+	.quad		0xbef9a3f7b2c67915, 0xc67178f2e372532b
+	.quad		0xca273eceea26619c, 0xd186b8c721c0c207
+	.quad		0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178
+	.quad		0x06f067aa72176fba, 0x0a637dc5a2c898a6
+	.quad		0x113f9804bef90dae, 0x1b710b35131c471b
+	.quad		0x28db77f523047d84, 0x32caab7b40c72493
+	.quad		0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c
+	.quad		0x4cc5d4becb3e42b6, 0x597f299cfc657e2a
+	.quad		0x5fcb6fab3ad6faec, 0x6c44198c4a475817
+
+	.macro		dround, i0, i1, i2, i3, i4, rc0, rc1, in0, in1, in2, in3, in4
+	.ifnb		\rc1
+	ld1		{v\rc1\().2d}, [x4], #16
+	.endif
+	add		v5.2d, v\rc0\().2d, v\in0\().2d
+	ext		v6.16b, v\i2\().16b, v\i3\().16b, #8
+	ext		v5.16b, v5.16b, v5.16b, #8
+	ext		v7.16b, v\i1\().16b, v\i2\().16b, #8
+	add		v\i3\().2d, v\i3\().2d, v5.2d
+	.ifnb		\in1
+	ext		v5.16b, v\in3\().16b, v\in4\().16b, #8
+	sha512su0	v\in0\().2d, v\in1\().2d
+	.endif
+	sha512h		q\i3, q6, v7.2d
+	.ifnb		\in1
+	sha512su1	v\in0\().2d, v\in2\().2d, v5.2d
+	.endif
+	add		v\i4\().2d, v\i1\().2d, v\i3\().2d
+	sha512h2	q\i3, q\i1, v\i0\().2d
+	.endm
+
+	/*
+	 * void sha512_ce_transform(struct sha512_state *sst, u8 const *src,
+	 *			  int blocks)
+	 */
+	.text
+SYM_FUNC_START(sha512_ce_transform)
+	/* load state */
+	ld1		{v8.2d-v11.2d}, [x0]
+
+	/* load first 4 round constants */
+	adr_l		x3, .Lsha512_rcon
+	ld1		{v20.2d-v23.2d}, [x3], #64
+
+	/* load input */
+0:	ld1		{v12.2d-v15.2d}, [x1], #64
+	ld1		{v16.2d-v19.2d}, [x1], #64
+	sub		w2, w2, #1
+
+CPU_LE(	rev64		v12.16b, v12.16b	)
+CPU_LE(	rev64		v13.16b, v13.16b	)
+CPU_LE(	rev64		v14.16b, v14.16b	)
+CPU_LE(	rev64		v15.16b, v15.16b	)
+CPU_LE(	rev64		v16.16b, v16.16b	)
+CPU_LE(	rev64		v17.16b, v17.16b	)
+CPU_LE(	rev64		v18.16b, v18.16b	)
+CPU_LE(	rev64		v19.16b, v19.16b	)
+
+	mov		x4, x3				// rc pointer
+
+	mov		v0.16b, v8.16b
+	mov		v1.16b, v9.16b
+	mov		v2.16b, v10.16b
+	mov		v3.16b, v11.16b
+
+	// v0  ab  cd  --  ef  gh  ab
+	// v1  cd  --  ef  gh  ab  cd
+	// v2  ef  gh  ab  cd  --  ef
+	// v3  gh  ab  cd  --  ef  gh
+	// v4  --  ef  gh  ab  cd  --
+
+	dround		0, 1, 2, 3, 4, 20, 24, 12, 13, 19, 16, 17
+	dround		3, 0, 4, 2, 1, 21, 25, 13, 14, 12, 17, 18
+	dround		2, 3, 1, 4, 0, 22, 26, 14, 15, 13, 18, 19
+	dround		4, 2, 0, 1, 3, 23, 27, 15, 16, 14, 19, 12
+	dround		1, 4, 3, 0, 2, 24, 28, 16, 17, 15, 12, 13
+
+	dround		0, 1, 2, 3, 4, 25, 29, 17, 18, 16, 13, 14
+	dround		3, 0, 4, 2, 1, 26, 30, 18, 19, 17, 14, 15
+	dround		2, 3, 1, 4, 0, 27, 31, 19, 12, 18, 15, 16
+	dround		4, 2, 0, 1, 3, 28, 24, 12, 13, 19, 16, 17
+	dround		1, 4, 3, 0, 2, 29, 25, 13, 14, 12, 17, 18
+
+	dround		0, 1, 2, 3, 4, 30, 26, 14, 15, 13, 18, 19
+	dround		3, 0, 4, 2, 1, 31, 27, 15, 16, 14, 19, 12
+	dround		2, 3, 1, 4, 0, 24, 28, 16, 17, 15, 12, 13
+	dround		4, 2, 0, 1, 3, 25, 29, 17, 18, 16, 13, 14
+	dround		1, 4, 3, 0, 2, 26, 30, 18, 19, 17, 14, 15
+
+	dround		0, 1, 2, 3, 4, 27, 31, 19, 12, 18, 15, 16
+	dround		3, 0, 4, 2, 1, 28, 24, 12, 13, 19, 16, 17
+	dround		2, 3, 1, 4, 0, 29, 25, 13, 14, 12, 17, 18
+	dround		4, 2, 0, 1, 3, 30, 26, 14, 15, 13, 18, 19
+	dround		1, 4, 3, 0, 2, 31, 27, 15, 16, 14, 19, 12
+
+	dround		0, 1, 2, 3, 4, 24, 28, 16, 17, 15, 12, 13
+	dround		3, 0, 4, 2, 1, 25, 29, 17, 18, 16, 13, 14
+	dround		2, 3, 1, 4, 0, 26, 30, 18, 19, 17, 14, 15
+	dround		4, 2, 0, 1, 3, 27, 31, 19, 12, 18, 15, 16
+	dround		1, 4, 3, 0, 2, 28, 24, 12, 13, 19, 16, 17
+
+	dround		0, 1, 2, 3, 4, 29, 25, 13, 14, 12, 17, 18
+	dround		3, 0, 4, 2, 1, 30, 26, 14, 15, 13, 18, 19
+	dround		2, 3, 1, 4, 0, 31, 27, 15, 16, 14, 19, 12
+	dround		4, 2, 0, 1, 3, 24, 28, 16, 17, 15, 12, 13
+	dround		1, 4, 3, 0, 2, 25, 29, 17, 18, 16, 13, 14
+
+	dround		0, 1, 2, 3, 4, 26, 30, 18, 19, 17, 14, 15
+	dround		3, 0, 4, 2, 1, 27, 31, 19, 12, 18, 15, 16
+	dround		2, 3, 1, 4, 0, 28, 24, 12
+	dround		4, 2, 0, 1, 3, 29, 25, 13
+	dround		1, 4, 3, 0, 2, 30, 26, 14
+
+	dround		0, 1, 2, 3, 4, 31, 27, 15
+	dround		3, 0, 4, 2, 1, 24,   , 16
+	dround		2, 3, 1, 4, 0, 25,   , 17
+	dround		4, 2, 0, 1, 3, 26,   , 18
+	dround		1, 4, 3, 0, 2, 27,   , 19
+
+	/* update state */
+	add		v8.2d, v8.2d, v0.2d
+	add		v9.2d, v9.2d, v1.2d
+	add		v10.2d, v10.2d, v2.2d
+	add		v11.2d, v11.2d, v3.2d
+
+	cond_yield	3f, x4, x5
+	/* handled all input blocks? */
+	cbnz		w2, 0b
+
+	/* store new state */
+3:	st1		{v8.2d-v11.2d}, [x0]
+	mov		w0, w2
+	ret
+SYM_FUNC_END(sha512_ce_transform)
diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c
new file mode 100644
index 000000000..94cb7580d
--- /dev/null
+++ b/arch/arm64/crypto/sha512-ce-glue.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sha512-ce-glue.c - SHA-384/SHA-512 using ARMv8 Crypto Extensions
+ *
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sha2.h>
+#include <crypto/sha512_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
+
+asmlinkage int sha512_ce_transform(struct sha512_state *sst, u8 const *src,
+				   int blocks);
+
+asmlinkage void sha512_block_data_order(u64 *digest, u8 const *src, int blocks);
+
+static void __sha512_ce_transform(struct sha512_state *sst, u8 const *src,
+				  int blocks)
+{
+	while (blocks) {
+		int rem;
+
+		kernel_neon_begin();
+		rem = sha512_ce_transform(sst, src, blocks);
+		kernel_neon_end();
+		src += (blocks - rem) * SHA512_BLOCK_SIZE;
+		blocks = rem;
+	}
+}
+
+static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src,
+				      int blocks)
+{
+	sha512_block_data_order(sst->state, src, blocks);
+}
+
+static int sha512_ce_update(struct shash_desc *desc, const u8 *data,
+			    unsigned int len)
+{
+	sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform
+						   : __sha512_block_data_order;
+
+	sha512_base_do_update(desc, data, len, fn);
+	return 0;
+}
+
+static int sha512_ce_finup(struct shash_desc *desc, const u8 *data,
+			   unsigned int len, u8 *out)
+{
+	sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform
+						   : __sha512_block_data_order;
+
+	sha512_base_do_update(desc, data, len, fn);
+	sha512_base_do_finalize(desc, fn);
+	return sha512_base_finish(desc, out);
+}
+
+static int sha512_ce_final(struct shash_desc *desc, u8 *out)
+{
+	sha512_block_fn *fn = crypto_simd_usable() ? __sha512_ce_transform
+						   : __sha512_block_data_order;
+
+	sha512_base_do_finalize(desc, fn);
+	return sha512_base_finish(desc, out);
+}
+
+static struct shash_alg algs[] = { {
+	.init			= sha384_base_init,
+	.update			= sha512_ce_update,
+	.final			= sha512_ce_final,
+	.finup			= sha512_ce_finup,
+	.descsize		= sizeof(struct sha512_state),
+	.digestsize		= SHA384_DIGEST_SIZE,
+	.base.cra_name		= "sha384",
+	.base.cra_driver_name	= "sha384-ce",
+	.base.cra_priority	= 200,
+	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.init			= sha512_base_init,
+	.update			= sha512_ce_update,
+	.final			= sha512_ce_final,
+	.finup			= sha512_ce_finup,
+	.descsize		= sizeof(struct sha512_state),
+	.digestsize		= SHA512_DIGEST_SIZE,
+	.base.cra_name		= "sha512",
+	.base.cra_driver_name	= "sha512-ce",
+	.base.cra_priority	= 200,
+	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int __init sha512_ce_mod_init(void)
+{
+	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
+}
+
+static void __exit sha512_ce_mod_fini(void)
+{
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_cpu_feature_match(SHA512, sha512_ce_mod_init);
+module_exit(sha512_ce_mod_fini);
diff --git a/arch/arm64/crypto/sha512-glue.c b/arch/arm64/crypto/sha512-glue.c
new file mode 100644
index 000000000..2acff1c7d
--- /dev/null
+++ b/arch/arm64/crypto/sha512-glue.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux/arm64 port of the OpenSSL SHA512 implementation for AArch64
+ *
+ * Copyright (c) 2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <crypto/internal/hash.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <crypto/sha2.h>
+#include <crypto/sha512_base.h>
+#include <asm/neon.h>
+
+MODULE_DESCRIPTION("SHA-384/SHA-512 secure hash for arm64");
+MODULE_AUTHOR("Andy Polyakov <appro@openssl.org>");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
+
+asmlinkage void sha512_block_data_order(u64 *digest, const void *data,
+					unsigned int num_blks);
+EXPORT_SYMBOL(sha512_block_data_order);
+
+static void __sha512_block_data_order(struct sha512_state *sst, u8 const *src,
+				      int blocks)
+{
+	sha512_block_data_order(sst->state, src, blocks);
+}
+
+static int sha512_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int len)
+{
+	return sha512_base_do_update(desc, data, len,
+				     __sha512_block_data_order);
+}
+
+static int sha512_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	if (len)
+		sha512_base_do_update(desc, data, len,
+				      __sha512_block_data_order);
+	sha512_base_do_finalize(desc, __sha512_block_data_order);
+
+	return sha512_base_finish(desc, out);
+}
+
+static int sha512_final(struct shash_desc *desc, u8 *out)
+{
+	return sha512_finup(desc, NULL, 0, out);
+}
+
+static struct shash_alg algs[] = { {
+	.digestsize		= SHA512_DIGEST_SIZE,
+	.init			= sha512_base_init,
+	.update			= sha512_update,
+	.final			= sha512_final,
+	.finup			= sha512_finup,
+	.descsize		= sizeof(struct sha512_state),
+	.base.cra_name		= "sha512",
+	.base.cra_driver_name	= "sha512-arm64",
+	.base.cra_priority	= 150,
+	.base.cra_blocksize	= SHA512_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+}, {
+	.digestsize		= SHA384_DIGEST_SIZE,
+	.init			= sha384_base_init,
+	.update			= sha512_update,
+	.final			= sha512_final,
+	.finup			= sha512_finup,
+	.descsize		= sizeof(struct sha512_state),
+	.base.cra_name		= "sha384",
+	.base.cra_driver_name	= "sha384-arm64",
+	.base.cra_priority	= 150,
+	.base.cra_blocksize	= SHA384_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+} };
+
+static int __init sha512_mod_init(void)
+{
+	return crypto_register_shashes(algs, ARRAY_SIZE(algs));
+}
+
+static void __exit sha512_mod_fini(void)
+{
+	crypto_unregister_shashes(algs, ARRAY_SIZE(algs));
+}
+
+module_init(sha512_mod_init);
+module_exit(sha512_mod_fini);
diff --git a/arch/arm64/crypto/sm3-ce-core.S b/arch/arm64/crypto/sm3-ce-core.S
new file mode 100644
index 000000000..ca70cfacd
--- /dev/null
+++ b/arch/arm64/crypto/sm3-ce-core.S
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * sm3-ce-core.S - SM3 secure hash using ARMv8.2 Crypto Extensions
+ *
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+
+	.irp		b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
+	.set		.Lv\b\().4s, \b
+	.endr
+
+	.macro		sm3partw1, rd, rn, rm
+	.inst		0xce60c000 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
+	.endm
+
+	.macro		sm3partw2, rd, rn, rm
+	.inst		0xce60c400 | .L\rd | (.L\rn << 5) | (.L\rm << 16)
+	.endm
+
+	.macro		sm3ss1, rd, rn, rm, ra
+	.inst		0xce400000 | .L\rd | (.L\rn << 5) | (.L\ra << 10) | (.L\rm << 16)
+	.endm
+
+	.macro		sm3tt1a, rd, rn, rm, imm2
+	.inst		0xce408000 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16)
+	.endm
+
+	.macro		sm3tt1b, rd, rn, rm, imm2
+	.inst		0xce408400 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16)
+	.endm
+
+	.macro		sm3tt2a, rd, rn, rm, imm2
+	.inst		0xce408800 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16)
+	.endm
+
+	.macro		sm3tt2b, rd, rn, rm, imm2
+	.inst		0xce408c00 | .L\rd | (.L\rn << 5) | ((\imm2) << 12) | (.L\rm << 16)
+	.endm
+
+	.macro		round, ab, s0, t0, t1, i
+	sm3ss1		v5.4s, v8.4s, \t0\().4s, v9.4s
+	shl		\t1\().4s, \t0\().4s, #1
+	sri		\t1\().4s, \t0\().4s, #31
+	sm3tt1\ab	v8.4s, v5.4s, v10.4s, \i
+	sm3tt2\ab	v9.4s, v5.4s, \s0\().4s, \i
+	.endm
+
+	.macro		qround, ab, s0, s1, s2, s3, s4
+	.ifnb		\s4
+	ext		\s4\().16b, \s1\().16b, \s2\().16b, #12
+	ext		v6.16b, \s0\().16b, \s1\().16b, #12
+	ext		v7.16b, \s2\().16b, \s3\().16b, #8
+	sm3partw1	\s4\().4s, \s0\().4s, \s3\().4s
+	.endif
+
+	eor		v10.16b, \s0\().16b, \s1\().16b
+
+	round		\ab, \s0, v11, v12, 0
+	round		\ab, \s0, v12, v11, 1
+	round		\ab, \s0, v11, v12, 2
+	round		\ab, \s0, v12, v11, 3
+
+	.ifnb		\s4
+	sm3partw2	\s4\().4s, v7.4s, v6.4s
+	.endif
+	.endm
+
+	/*
+	 * void sm3_ce_transform(struct sm3_state *sst, u8 const *src,
+	 *                       int blocks)
+	 */
+	.text
+SYM_TYPED_FUNC_START(sm3_ce_transform)
+	/* load state */
+	ld1		{v8.4s-v9.4s}, [x0]
+	rev64		v8.4s, v8.4s
+	rev64		v9.4s, v9.4s
+	ext		v8.16b, v8.16b, v8.16b, #8
+	ext		v9.16b, v9.16b, v9.16b, #8
+
+	adr_l		x8, .Lt
+	ldp		s13, s14, [x8]
+
+	/* load input */
+0:	ld1		{v0.16b-v3.16b}, [x1], #64
+	sub		w2, w2, #1
+
+	mov		v15.16b, v8.16b
+	mov		v16.16b, v9.16b
+
+CPU_LE(	rev32		v0.16b, v0.16b		)
+CPU_LE(	rev32		v1.16b, v1.16b		)
+CPU_LE(	rev32		v2.16b, v2.16b		)
+CPU_LE(	rev32		v3.16b, v3.16b		)
+
+	ext		v11.16b, v13.16b, v13.16b, #4
+
+	qround		a, v0, v1, v2, v3, v4
+	qround		a, v1, v2, v3, v4, v0
+	qround		a, v2, v3, v4, v0, v1
+	qround		a, v3, v4, v0, v1, v2
+
+	ext		v11.16b, v14.16b, v14.16b, #4
+
+	qround		b, v4, v0, v1, v2, v3
+	qround		b, v0, v1, v2, v3, v4
+	qround		b, v1, v2, v3, v4, v0
+	qround		b, v2, v3, v4, v0, v1
+	qround		b, v3, v4, v0, v1, v2
+	qround		b, v4, v0, v1, v2, v3
+	qround		b, v0, v1, v2, v3, v4
+	qround		b, v1, v2, v3, v4, v0
+	qround		b, v2, v3, v4, v0, v1
+	qround		b, v3, v4
+	qround		b, v4, v0
+	qround		b, v0, v1
+
+	eor		v8.16b, v8.16b, v15.16b
+	eor		v9.16b, v9.16b, v16.16b
+
+	/* handled all input blocks? */
+	cbnz		w2, 0b
+
+	/* save state */
+	rev64		v8.4s, v8.4s
+	rev64		v9.4s, v9.4s
+	ext		v8.16b, v8.16b, v8.16b, #8
+	ext		v9.16b, v9.16b, v9.16b, #8
+	st1		{v8.4s-v9.4s}, [x0]
+	ret
+SYM_FUNC_END(sm3_ce_transform)
+
+	.section	".rodata", "a"
+	.align		3
+.Lt:	.word		0x79cc4519, 0x9d8a7a87
diff --git a/arch/arm64/crypto/sm3-ce-glue.c b/arch/arm64/crypto/sm3-ce-glue.c
new file mode 100644
index 000000000..54bf6ebcf
--- /dev/null
+++ b/arch/arm64/crypto/sm3-ce-glue.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sm3-ce-glue.c - SM3 secure hash using ARMv8.2 Crypto Extensions
+ *
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sm3.h>
+#include <crypto/sm3_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+MODULE_DESCRIPTION("SM3 secure hash using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+
+asmlinkage void sm3_ce_transform(struct sm3_state *sst, u8 const *src,
+				 int blocks);
+
+static int sm3_ce_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int len)
+{
+	if (!crypto_simd_usable()) {
+		sm3_update(shash_desc_ctx(desc), data, len);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_update(desc, data, len, sm3_ce_transform);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm3_ce_final(struct shash_desc *desc, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		sm3_final(shash_desc_ctx(desc), out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_finalize(desc, sm3_ce_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static int sm3_ce_finup(struct shash_desc *desc, const u8 *data,
+			unsigned int len, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		struct sm3_state *sctx = shash_desc_ctx(desc);
+
+		if (len)
+			sm3_update(sctx, data, len);
+		sm3_final(sctx, out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	if (len)
+		sm3_base_do_update(desc, data, len, sm3_ce_transform);
+	sm3_base_do_finalize(desc, sm3_ce_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static struct shash_alg sm3_alg = {
+	.digestsize		= SM3_DIGEST_SIZE,
+	.init			= sm3_base_init,
+	.update			= sm3_ce_update,
+	.final			= sm3_ce_final,
+	.finup			= sm3_ce_finup,
+	.descsize		= sizeof(struct sm3_state),
+	.base.cra_name		= "sm3",
+	.base.cra_driver_name	= "sm3-ce",
+	.base.cra_blocksize	= SM3_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 400,
+};
+
+static int __init sm3_ce_mod_init(void)
+{
+	return crypto_register_shash(&sm3_alg);
+}
+
+static void __exit sm3_ce_mod_fini(void)
+{
+	crypto_unregister_shash(&sm3_alg);
+}
+
+module_cpu_feature_match(SM3, sm3_ce_mod_init);
+module_exit(sm3_ce_mod_fini);
diff --git a/arch/arm64/crypto/sm3-neon-core.S b/arch/arm64/crypto/sm3-neon-core.S
new file mode 100644
index 000000000..4357e0e51
--- /dev/null
+++ b/arch/arm64/crypto/sm3-neon-core.S
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sm3-neon-core.S - SM3 secure hash using NEON instructions
+ *
+ * Linux/arm64 port of the libgcrypt SM3 implementation for AArch64
+ *
+ * Copyright (C) 2021 Jussi Kivilinna <jussi.kivilinna@iki.fi>
+ * Copyright (c) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+
+/* Context structure */
+
+#define state_h0 0
+#define state_h1 4
+#define state_h2 8
+#define state_h3 12
+#define state_h4 16
+#define state_h5 20
+#define state_h6 24
+#define state_h7 28
+
+/* Stack structure */
+
+#define STACK_W_SIZE        (32 * 2 * 3)
+
+#define STACK_W             (0)
+#define STACK_SIZE          (STACK_W + STACK_W_SIZE)
+
+/* Register macros */
+
+#define RSTATE x0
+#define RDATA  x1
+#define RNBLKS x2
+#define RKPTR  x28
+#define RFRAME x29
+
+#define ra w3
+#define rb w4
+#define rc w5
+#define rd w6
+#define re w7
+#define rf w8
+#define rg w9
+#define rh w10
+
+#define t0 w11
+#define t1 w12
+#define t2 w13
+#define t3 w14
+#define t4 w15
+#define t5 w16
+#define t6 w17
+
+#define k_even w19
+#define k_odd w20
+
+#define addr0 x21
+#define addr1 x22
+
+#define s0 w23
+#define s1 w24
+#define s2 w25
+#define s3 w26
+
+#define W0 v0
+#define W1 v1
+#define W2 v2
+#define W3 v3
+#define W4 v4
+#define W5 v5
+
+#define XTMP0 v6
+#define XTMP1 v7
+#define XTMP2 v16
+#define XTMP3 v17
+#define XTMP4 v18
+#define XTMP5 v19
+#define XTMP6 v20
+
+/* Helper macros. */
+
+#define _(...) /*_*/
+
+#define clear_vec(x) \
+	movi	x.8h, #0;
+
+#define rolw(o, a, n) \
+	ror	o, a, #(32 - n);
+
+/* Round function macros. */
+
+#define GG1_1(x, y, z, o, t) \
+	eor	o, x, y;
+#define GG1_2(x, y, z, o, t) \
+	eor	o, o, z;
+#define GG1_3(x, y, z, o, t)
+
+#define FF1_1(x, y, z, o, t) GG1_1(x, y, z, o, t)
+#define FF1_2(x, y, z, o, t)
+#define FF1_3(x, y, z, o, t) GG1_2(x, y, z, o, t)
+
+#define GG2_1(x, y, z, o, t) \
+	bic	o, z, x;
+#define GG2_2(x, y, z, o, t) \
+	and	t, y, x;
+#define GG2_3(x, y, z, o, t) \
+	eor	o, o, t;
+
+#define FF2_1(x, y, z, o, t) \
+	eor	o, x, y;
+#define FF2_2(x, y, z, o, t) \
+	and	t, x, y; \
+	and	o, o, z;
+#define FF2_3(x, y, z, o, t) \
+	eor	o, o, t;
+
+#define R(i, a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	K_LOAD(round);                                                        \
+	ldr	t5, [sp, #(wtype##_W1_ADDR(round, widx))];                    \
+	rolw(t0, a, 12);                              /* rol(a, 12) => t0 */  \
+      IOP(1, iop_param);                                                      \
+	FF##i##_1(a, b, c, t1, t2);                                           \
+	ldr	t6, [sp, #(wtype##_W1W2_ADDR(round, widx))];                  \
+	add	k, k, e;                                                      \
+      IOP(2, iop_param);                                                      \
+	GG##i##_1(e, f, g, t3, t4);                                           \
+	FF##i##_2(a, b, c, t1, t2);                                           \
+      IOP(3, iop_param);                                                      \
+	add	k, k, t0;                                                     \
+	add	h, h, t5;                                                     \
+	add	d, d, t6;                     /* w1w2 + d => d */             \
+      IOP(4, iop_param);                                                      \
+	rolw(k, k, 7);                        /* rol (t0 + e + t), 7) => k */ \
+	GG##i##_2(e, f, g, t3, t4);                                           \
+	add	h, h, k;                      /* h + w1 + k => h */           \
+      IOP(5, iop_param);                                                      \
+	FF##i##_3(a, b, c, t1, t2);                                           \
+	eor	t0, t0, k;                    /* k ^ t0 => t0 */              \
+	GG##i##_3(e, f, g, t3, t4);                                           \
+	add	d, d, t1;                     /* FF(a,b,c) + d => d */        \
+      IOP(6, iop_param);                                                      \
+	add	t3, t3, h;                    /* GG(e,f,g) + h => t3 */       \
+	rolw(b, b, 9);                        /* rol(b, 9) => b */            \
+	eor	h, t3, t3, ror #(32-9);                                       \
+      IOP(7, iop_param);                                                      \
+	add	d, d, t0;                     /* t0 + d => d */               \
+	rolw(f, f, 19);                       /* rol(f, 19) => f */           \
+      IOP(8, iop_param);                                                      \
+	eor	h, h, t3, ror #(32-17);       /* P0(t3) => h */
+
+#define R1(a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	R(1, ##a, ##b, ##c, ##d, ##e, ##f, ##g, ##h, ##k, K_LOAD, round, widx, wtype, IOP, iop_param)
+
+#define R2(a, b, c, d, e, f, g, h, k, K_LOAD, round, widx, wtype, IOP, iop_param) \
+	R(2, ##a, ##b, ##c, ##d, ##e, ##f, ##g, ##h, ##k, K_LOAD, round, widx, wtype, IOP, iop_param)
+
+#define KL(round) \
+	ldp	k_even, k_odd, [RKPTR, #(4*(round))];
+
+/* Input expansion macros. */
+
+/* Byte-swapped input address. */
+#define IW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((round) / 4) * 64 + (offs) + ((widx) * 4))
+
+/* Expanded input address. */
+#define XW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((((round) / 3) - 4) % 2) * 64 + (offs) + ((widx) * 4))
+
+/* Rounds 1-12, byte-swapped input block addresses. */
+#define IW_W1_ADDR(round, widx)   IW_W_ADDR(round, widx, 32)
+#define IW_W1W2_ADDR(round, widx) IW_W_ADDR(round, widx, 48)
+
+/* Rounds 1-12, expanded input block addresses. */
+#define XW_W1_ADDR(round, widx)   XW_W_ADDR(round, widx, 0)
+#define XW_W1W2_ADDR(round, widx) XW_W_ADDR(round, widx, 16)
+
+/* Input block loading.
+ * Interleaving within round function needed for in-order CPUs. */
+#define LOAD_W_VEC_1_1() \
+	add	addr0, sp, #IW_W1_ADDR(0, 0);
+#define LOAD_W_VEC_1_2() \
+	add	addr1, sp, #IW_W1_ADDR(4, 0);
+#define LOAD_W_VEC_1_3() \
+	ld1	{W0.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_4() \
+	ld1	{W1.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_5() \
+	ld1	{W2.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_6() \
+	ld1	{W3.16b}, [RDATA], #16;
+#define LOAD_W_VEC_1_7() \
+	rev32	XTMP0.16b, W0.16b;
+#define LOAD_W_VEC_1_8() \
+	rev32	XTMP1.16b, W1.16b;
+#define LOAD_W_VEC_2_1() \
+	rev32	XTMP2.16b, W2.16b;
+#define LOAD_W_VEC_2_2() \
+	rev32	XTMP3.16b, W3.16b;
+#define LOAD_W_VEC_2_3() \
+	eor	XTMP4.16b, XTMP1.16b, XTMP0.16b;
+#define LOAD_W_VEC_2_4() \
+	eor	XTMP5.16b, XTMP2.16b, XTMP1.16b;
+#define LOAD_W_VEC_2_5() \
+	st1	{XTMP0.16b}, [addr0], #16;
+#define LOAD_W_VEC_2_6() \
+	st1	{XTMP4.16b}, [addr0]; \
+	add	addr0, sp, #IW_W1_ADDR(8, 0);
+#define LOAD_W_VEC_2_7() \
+	eor	XTMP6.16b, XTMP3.16b, XTMP2.16b;
+#define LOAD_W_VEC_2_8() \
+	ext	W0.16b, XTMP0.16b, XTMP0.16b, #8;  /* W0: xx, w0, xx, xx */
+#define LOAD_W_VEC_3_1() \
+	mov	W2.16b, XTMP1.16b;                 /* W2: xx, w6, w5, w4 */
+#define LOAD_W_VEC_3_2() \
+	st1	{XTMP1.16b}, [addr1], #16;
+#define LOAD_W_VEC_3_3() \
+	st1	{XTMP5.16b}, [addr1]; \
+	ext	W1.16b, XTMP0.16b, XTMP0.16b, #4;  /* W1: xx, w3, w2, w1 */
+#define LOAD_W_VEC_3_4() \
+	ext	W3.16b, XTMP1.16b, XTMP2.16b, #12; /* W3: xx, w9, w8, w7 */
+#define LOAD_W_VEC_3_5() \
+	ext	W4.16b, XTMP2.16b, XTMP3.16b, #8;  /* W4: xx, w12, w11, w10 */
+#define LOAD_W_VEC_3_6() \
+	st1	{XTMP2.16b}, [addr0], #16;
+#define LOAD_W_VEC_3_7() \
+	st1	{XTMP6.16b}, [addr0];
+#define LOAD_W_VEC_3_8() \
+	ext	W5.16b, XTMP3.16b, XTMP3.16b, #4;  /* W5: xx, w15, w14, w13 */
+
+#define LOAD_W_VEC_1(iop_num, ...) \
+	LOAD_W_VEC_1_##iop_num()
+#define LOAD_W_VEC_2(iop_num, ...) \
+	LOAD_W_VEC_2_##iop_num()
+#define LOAD_W_VEC_3(iop_num, ...) \
+	LOAD_W_VEC_3_##iop_num()
+
+/* Message scheduling. Note: 3 words per vector register.
+ * Interleaving within round function needed for in-order CPUs. */
+#define SCHED_W_1_1(round, w0, w1, w2, w3, w4, w5) \
+	/* Load (w[i - 16]) => XTMP0 */            \
+	/* Load (w[i - 13]) => XTMP5 */            \
+	ext	XTMP0.16b, w0.16b, w0.16b, #12;    /* XTMP0: w0, xx, xx, xx */
+#define SCHED_W_1_2(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP5.16b, w1.16b, w1.16b, #12;
+#define SCHED_W_1_3(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP0.16b, XTMP0.16b, w1.16b, #12; /* XTMP0: xx, w2, w1, w0 */
+#define SCHED_W_1_4(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP5.16b, XTMP5.16b, w2.16b, #12;
+#define SCHED_W_1_5(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 9] == w3 */                       \
+	/* W3 ^ XTMP0 => XTMP0 */                  \
+	eor	XTMP0.16b, XTMP0.16b, w3.16b;
+#define SCHED_W_1_6(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 3] == w5 */                       \
+	/* rol(XMM5, 15) ^ XTMP0 => XTMP0 */       \
+	/* rol(XTMP5, 7) => XTMP1 */               \
+	add	addr0, sp, #XW_W1_ADDR((round), 0); \
+	shl	XTMP2.4s, w5.4s, #15;
+#define SCHED_W_1_7(round, w0, w1, w2, w3, w4, w5) \
+	shl	XTMP1.4s, XTMP5.4s, #7;
+#define SCHED_W_1_8(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP2.4s, w5.4s, #(32-15);
+#define SCHED_W_2_1(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP1.4s, XTMP5.4s, #(32-7);
+#define SCHED_W_2_2(round, w0, w1, w2, w3, w4, w5) \
+	eor	XTMP0.16b, XTMP0.16b, XTMP2.16b;
+#define SCHED_W_2_3(round, w0, w1, w2, w3, w4, w5) \
+	/* w[i - 6] == W4 */                       \
+	/* W4 ^ XTMP1 => XTMP1 */                  \
+	eor	XTMP1.16b, XTMP1.16b, w4.16b;
+#define SCHED_W_2_4(round, w0, w1, w2, w3, w4, w5) \
+	/* P1(XTMP0) ^ XTMP1 => W0 */              \
+	shl	XTMP3.4s, XTMP0.4s, #15;
+#define SCHED_W_2_5(round, w0, w1, w2, w3, w4, w5) \
+	shl	XTMP4.4s, XTMP0.4s, #23;
+#define SCHED_W_2_6(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, XTMP1.16b, XTMP0.16b;
+#define SCHED_W_2_7(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP3.4s, XTMP0.4s, #(32-15);
+#define SCHED_W_2_8(round, w0, w1, w2, w3, w4, w5) \
+	sri	XTMP4.4s, XTMP0.4s, #(32-23);
+#define SCHED_W_3_1(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, w0.16b, XTMP3.16b;
+#define SCHED_W_3_2(round, w0, w1, w2, w3, w4, w5) \
+	/* Load (w[i - 3]) => XTMP2 */             \
+	ext	XTMP2.16b, w4.16b, w4.16b, #12;
+#define SCHED_W_3_3(round, w0, w1, w2, w3, w4, w5) \
+	eor	w0.16b, w0.16b, XTMP4.16b;
+#define SCHED_W_3_4(round, w0, w1, w2, w3, w4, w5) \
+	ext	XTMP2.16b, XTMP2.16b, w5.16b, #12;
+#define SCHED_W_3_5(round, w0, w1, w2, w3, w4, w5) \
+	/* W1 ^ W2 => XTMP3 */                     \
+	eor	XTMP3.16b, XTMP2.16b, w0.16b;
+#define SCHED_W_3_6(round, w0, w1, w2, w3, w4, w5)
+#define SCHED_W_3_7(round, w0, w1, w2, w3, w4, w5) \
+	st1	{XTMP2.16b-XTMP3.16b}, [addr0];
+#define SCHED_W_3_8(round, w0, w1, w2, w3, w4, w5)
+
+#define SCHED_W_W0W1W2W3W4W5_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W0, W1, W2, W3, W4, W5)
+#define SCHED_W_W0W1W2W3W4W5_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W0, W1, W2, W3, W4, W5)
+#define SCHED_W_W0W1W2W3W4W5_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W0, W1, W2, W3, W4, W5)
+
+#define SCHED_W_W1W2W3W4W5W0_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W1, W2, W3, W4, W5, W0)
+#define SCHED_W_W1W2W3W4W5W0_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W1, W2, W3, W4, W5, W0)
+#define SCHED_W_W1W2W3W4W5W0_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W1, W2, W3, W4, W5, W0)
+
+#define SCHED_W_W2W3W4W5W0W1_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W2, W3, W4, W5, W0, W1)
+#define SCHED_W_W2W3W4W5W0W1_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W2, W3, W4, W5, W0, W1)
+#define SCHED_W_W2W3W4W5W0W1_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W2, W3, W4, W5, W0, W1)
+
+#define SCHED_W_W3W4W5W0W1W2_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W3, W4, W5, W0, W1, W2)
+#define SCHED_W_W3W4W5W0W1W2_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W3, W4, W5, W0, W1, W2)
+#define SCHED_W_W3W4W5W0W1W2_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W3, W4, W5, W0, W1, W2)
+
+#define SCHED_W_W4W5W0W1W2W3_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W4, W5, W0, W1, W2, W3)
+#define SCHED_W_W4W5W0W1W2W3_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W4, W5, W0, W1, W2, W3)
+#define SCHED_W_W4W5W0W1W2W3_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W4, W5, W0, W1, W2, W3)
+
+#define SCHED_W_W5W0W1W2W3W4_1(iop_num, round) \
+	SCHED_W_1_##iop_num(round, W5, W0, W1, W2, W3, W4)
+#define SCHED_W_W5W0W1W2W3W4_2(iop_num, round) \
+	SCHED_W_2_##iop_num(round, W5, W0, W1, W2, W3, W4)
+#define SCHED_W_W5W0W1W2W3W4_3(iop_num, round) \
+	SCHED_W_3_##iop_num(round, W5, W0, W1, W2, W3, W4)
+
+
+	/*
+	 * Transform blocks*64 bytes (blocks*16 32-bit words) at 'src'.
+	 *
+	 * void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
+	 *                         int blocks)
+	 */
+	.text
+.align 3
+SYM_TYPED_FUNC_START(sm3_neon_transform)
+	ldp		ra, rb, [RSTATE, #0]
+	ldp		rc, rd, [RSTATE, #8]
+	ldp		re, rf, [RSTATE, #16]
+	ldp		rg, rh, [RSTATE, #24]
+
+	stp		x28, x29, [sp, #-16]!
+	stp		x19, x20, [sp, #-16]!
+	stp		x21, x22, [sp, #-16]!
+	stp		x23, x24, [sp, #-16]!
+	stp		x25, x26, [sp, #-16]!
+	mov		RFRAME, sp
+
+	sub		addr0, sp, #STACK_SIZE
+	adr_l		RKPTR, .LKtable
+	and		sp, addr0, #(~63)
+
+	/* Preload first block. */
+	LOAD_W_VEC_1(1, 0)
+	LOAD_W_VEC_1(2, 0)
+	LOAD_W_VEC_1(3, 0)
+	LOAD_W_VEC_1(4, 0)
+	LOAD_W_VEC_1(5, 0)
+	LOAD_W_VEC_1(6, 0)
+	LOAD_W_VEC_1(7, 0)
+	LOAD_W_VEC_1(8, 0)
+	LOAD_W_VEC_2(1, 0)
+	LOAD_W_VEC_2(2, 0)
+	LOAD_W_VEC_2(3, 0)
+	LOAD_W_VEC_2(4, 0)
+	LOAD_W_VEC_2(5, 0)
+	LOAD_W_VEC_2(6, 0)
+	LOAD_W_VEC_2(7, 0)
+	LOAD_W_VEC_2(8, 0)
+	LOAD_W_VEC_3(1, 0)
+	LOAD_W_VEC_3(2, 0)
+	LOAD_W_VEC_3(3, 0)
+	LOAD_W_VEC_3(4, 0)
+	LOAD_W_VEC_3(5, 0)
+	LOAD_W_VEC_3(6, 0)
+	LOAD_W_VEC_3(7, 0)
+	LOAD_W_VEC_3(8, 0)
+
+.balign 16
+.Loop:
+	/* Transform 0-3 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 0, 0, IW, _, 0)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  1, 1, IW, _, 0)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 2, 2, IW, _, 0)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  3, 3, IW, _, 0)
+
+	/* Transform 4-7 + Precalc 12-14 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 4, 0, IW, _, 0)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  5, 1, IW, _, 0)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 6, 2, IW, SCHED_W_W0W1W2W3W4W5_1, 12)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  7, 3, IW, SCHED_W_W0W1W2W3W4W5_2, 12)
+
+	/* Transform 8-11 + Precalc 12-17 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 8, 0, IW, SCHED_W_W0W1W2W3W4W5_3, 12)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  9, 1, IW, SCHED_W_W1W2W3W4W5W0_1, 15)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 10, 2, IW, SCHED_W_W1W2W3W4W5W0_2, 15)
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  11, 3, IW, SCHED_W_W1W2W3W4W5W0_3, 15)
+
+	/* Transform 12-14 + Precalc 18-20 */
+	R1(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 12, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 18)
+	R1(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  13, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 18)
+	R1(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 14, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 18)
+
+	/* Transform 15-17 + Precalc 21-23 */
+	R1(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  15, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 21)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 16, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 21)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  17, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 21)
+
+	/* Transform 18-20 + Precalc 24-26 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 18, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 24)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  19, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 24)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 20, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 24)
+
+	/* Transform 21-23 + Precalc 27-29 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  21, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 27)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 22, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 27)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  23, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 27)
+
+	/* Transform 24-26 + Precalc 30-32 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 24, 0, XW, SCHED_W_W0W1W2W3W4W5_1, 30)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  25, 1, XW, SCHED_W_W0W1W2W3W4W5_2, 30)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 26, 2, XW, SCHED_W_W0W1W2W3W4W5_3, 30)
+
+	/* Transform 27-29 + Precalc 33-35 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  27, 0, XW, SCHED_W_W1W2W3W4W5W0_1, 33)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 28, 1, XW, SCHED_W_W1W2W3W4W5W0_2, 33)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  29, 2, XW, SCHED_W_W1W2W3W4W5W0_3, 33)
+
+	/* Transform 30-32 + Precalc 36-38 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 30, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 36)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  31, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 36)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 32, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 36)
+
+	/* Transform 33-35 + Precalc 39-41 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  33, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 39)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 34, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 39)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  35, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 39)
+
+	/* Transform 36-38 + Precalc 42-44 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 36, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 42)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  37, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 42)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 38, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 42)
+
+	/* Transform 39-41 + Precalc 45-47 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  39, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 45)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 40, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 45)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  41, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 45)
+
+	/* Transform 42-44 + Precalc 48-50 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 42, 0, XW, SCHED_W_W0W1W2W3W4W5_1, 48)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  43, 1, XW, SCHED_W_W0W1W2W3W4W5_2, 48)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 44, 2, XW, SCHED_W_W0W1W2W3W4W5_3, 48)
+
+	/* Transform 45-47 + Precalc 51-53 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  45, 0, XW, SCHED_W_W1W2W3W4W5W0_1, 51)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 46, 1, XW, SCHED_W_W1W2W3W4W5W0_2, 51)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  47, 2, XW, SCHED_W_W1W2W3W4W5W0_3, 51)
+
+	/* Transform 48-50 + Precalc 54-56 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 48, 0, XW, SCHED_W_W2W3W4W5W0W1_1, 54)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  49, 1, XW, SCHED_W_W2W3W4W5W0W1_2, 54)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 50, 2, XW, SCHED_W_W2W3W4W5W0W1_3, 54)
+
+	/* Transform 51-53 + Precalc 57-59 */
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  51, 0, XW, SCHED_W_W3W4W5W0W1W2_1, 57)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 52, 1, XW, SCHED_W_W3W4W5W0W1W2_2, 57)
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  53, 2, XW, SCHED_W_W3W4W5W0W1W2_3, 57)
+
+	/* Transform 54-56 + Precalc 60-62 */
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 54, 0, XW, SCHED_W_W4W5W0W1W2W3_1, 60)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  55, 1, XW, SCHED_W_W4W5W0W1W2W3_2, 60)
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 56, 2, XW, SCHED_W_W4W5W0W1W2W3_3, 60)
+
+	/* Transform 57-59 + Precalc 63 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  57, 0, XW, SCHED_W_W5W0W1W2W3W4_1, 63)
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 58, 1, XW, SCHED_W_W5W0W1W2W3W4_2, 63)
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  59, 2, XW, SCHED_W_W5W0W1W2W3W4_3, 63)
+
+	/* Transform 60 */
+	R2(ra, rb, rc, rd, re, rf, rg, rh, k_even, KL, 60, 0, XW, _, _)
+	subs		RNBLKS, RNBLKS, #1
+	b.eq		.Lend
+
+	/* Transform 61-63 + Preload next block */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  61, 1, XW, LOAD_W_VEC_1, _)
+	ldp		s0, s1, [RSTATE, #0]
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 62, 2, XW, LOAD_W_VEC_2, _)
+	ldp		s2, s3, [RSTATE, #8]
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  63, 0, XW, LOAD_W_VEC_3, _)
+
+	/* Update the chaining variables. */
+	eor		ra, ra, s0
+	eor		rb, rb, s1
+	ldp		s0, s1, [RSTATE, #16]
+	eor		rc, rc, s2
+	ldp		k_even, k_odd, [RSTATE, #24]
+	eor		rd, rd, s3
+	eor		re, re, s0
+	stp		ra, rb, [RSTATE, #0]
+	eor		rf, rf, s1
+	stp		rc, rd, [RSTATE, #8]
+	eor		rg, rg, k_even
+	stp		re, rf, [RSTATE, #16]
+	eor		rh, rh, k_odd
+	stp		rg, rh, [RSTATE, #24]
+	b		.Loop
+
+.Lend:
+	/* Transform 61-63 */
+	R2(rd, ra, rb, rc, rh, re, rf, rg, k_odd,  _,  61, 1, XW, _, _)
+	ldp		s0, s1, [RSTATE, #0]
+	R2(rc, rd, ra, rb, rg, rh, re, rf, k_even, KL, 62, 2, XW, _, _)
+	ldp		s2, s3, [RSTATE, #8]
+	R2(rb, rc, rd, ra, rf, rg, rh, re, k_odd,  _,  63, 0, XW, _, _)
+
+	/* Update the chaining variables. */
+	eor		ra, ra, s0
+	clear_vec(W0)
+	eor		rb, rb, s1
+	clear_vec(W1)
+	ldp		s0, s1, [RSTATE, #16]
+	clear_vec(W2)
+	eor		rc, rc, s2
+	clear_vec(W3)
+	ldp		k_even, k_odd, [RSTATE, #24]
+	clear_vec(W4)
+	eor		rd, rd, s3
+	clear_vec(W5)
+	eor		re, re, s0
+	clear_vec(XTMP0)
+	stp		ra, rb, [RSTATE, #0]
+	clear_vec(XTMP1)
+	eor		rf, rf, s1
+	clear_vec(XTMP2)
+	stp		rc, rd, [RSTATE, #8]
+	clear_vec(XTMP3)
+	eor		rg, rg, k_even
+	clear_vec(XTMP4)
+	stp		re, rf, [RSTATE, #16]
+	clear_vec(XTMP5)
+	eor		rh, rh, k_odd
+	clear_vec(XTMP6)
+	stp		rg, rh, [RSTATE, #24]
+
+	/* Clear message expansion area */
+	add		addr0, sp, #STACK_W
+	st1		{W0.16b-W3.16b}, [addr0], #64
+	st1		{W0.16b-W3.16b}, [addr0], #64
+	st1		{W0.16b-W3.16b}, [addr0]
+
+	mov		sp, RFRAME
+
+	ldp		x25, x26, [sp], #16
+	ldp		x23, x24, [sp], #16
+	ldp		x21, x22, [sp], #16
+	ldp		x19, x20, [sp], #16
+	ldp		x28, x29, [sp], #16
+
+	ret
+SYM_FUNC_END(sm3_neon_transform)
+
+
+	.section	".rodata", "a"
+
+	.align 4
+.LKtable:
+	.long 0x79cc4519, 0xf3988a32, 0xe7311465, 0xce6228cb
+	.long 0x9cc45197, 0x3988a32f, 0x7311465e, 0xe6228cbc
+	.long 0xcc451979, 0x988a32f3, 0x311465e7, 0x6228cbce
+	.long 0xc451979c, 0x88a32f39, 0x11465e73, 0x228cbce6
+	.long 0x9d8a7a87, 0x3b14f50f, 0x7629ea1e, 0xec53d43c
+	.long 0xd8a7a879, 0xb14f50f3, 0x629ea1e7, 0xc53d43ce
+	.long 0x8a7a879d, 0x14f50f3b, 0x29ea1e76, 0x53d43cec
+	.long 0xa7a879d8, 0x4f50f3b1, 0x9ea1e762, 0x3d43cec5
+	.long 0x7a879d8a, 0xf50f3b14, 0xea1e7629, 0xd43cec53
+	.long 0xa879d8a7, 0x50f3b14f, 0xa1e7629e, 0x43cec53d
+	.long 0x879d8a7a, 0x0f3b14f5, 0x1e7629ea, 0x3cec53d4
+	.long 0x79d8a7a8, 0xf3b14f50, 0xe7629ea1, 0xcec53d43
+	.long 0x9d8a7a87, 0x3b14f50f, 0x7629ea1e, 0xec53d43c
+	.long 0xd8a7a879, 0xb14f50f3, 0x629ea1e7, 0xc53d43ce
+	.long 0x8a7a879d, 0x14f50f3b, 0x29ea1e76, 0x53d43cec
+	.long 0xa7a879d8, 0x4f50f3b1, 0x9ea1e762, 0x3d43cec5
diff --git a/arch/arm64/crypto/sm3-neon-glue.c b/arch/arm64/crypto/sm3-neon-glue.c
new file mode 100644
index 000000000..7182ee683
--- /dev/null
+++ b/arch/arm64/crypto/sm3-neon-glue.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * sm3-neon-glue.c - SM3 secure hash using NEON instructions
+ *
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <asm/unaligned.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sm3.h>
+#include <crypto/sm3_base.h>
+#include <linux/cpufeature.h>
+#include <linux/crypto.h>
+#include <linux/module.h>
+
+
+asmlinkage void sm3_neon_transform(struct sm3_state *sst, u8 const *src,
+				   int blocks);
+
+static int sm3_neon_update(struct shash_desc *desc, const u8 *data,
+			   unsigned int len)
+{
+	if (!crypto_simd_usable()) {
+		sm3_update(shash_desc_ctx(desc), data, len);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm3_neon_final(struct shash_desc *desc, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		sm3_final(shash_desc_ctx(desc), out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	sm3_base_do_finalize(desc, sm3_neon_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static int sm3_neon_finup(struct shash_desc *desc, const u8 *data,
+			  unsigned int len, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		struct sm3_state *sctx = shash_desc_ctx(desc);
+
+		if (len)
+			sm3_update(sctx, data, len);
+		sm3_final(sctx, out);
+		return 0;
+	}
+
+	kernel_neon_begin();
+	if (len)
+		sm3_base_do_update(desc, data, len, sm3_neon_transform);
+	sm3_base_do_finalize(desc, sm3_neon_transform);
+	kernel_neon_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static struct shash_alg sm3_alg = {
+	.digestsize		= SM3_DIGEST_SIZE,
+	.init			= sm3_base_init,
+	.update			= sm3_neon_update,
+	.final			= sm3_neon_final,
+	.finup			= sm3_neon_finup,
+	.descsize		= sizeof(struct sm3_state),
+	.base.cra_name		= "sm3",
+	.base.cra_driver_name	= "sm3-neon",
+	.base.cra_blocksize	= SM3_BLOCK_SIZE,
+	.base.cra_module	= THIS_MODULE,
+	.base.cra_priority	= 200,
+};
+
+static int __init sm3_neon_init(void)
+{
+	return crypto_register_shash(&sm3_alg);
+}
+
+static void __exit sm3_neon_fini(void)
+{
+	crypto_unregister_shash(&sm3_alg);
+}
+
+module_init(sm3_neon_init);
+module_exit(sm3_neon_fini);
+
+MODULE_DESCRIPTION("SM3 secure hash using NEON instructions");
+MODULE_AUTHOR("Jussi Kivilinna <jussi.kivilinna@iki.fi>");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/crypto/sm4-ce-asm.h b/arch/arm64/crypto/sm4-ce-asm.h
new file mode 100644
index 000000000..7ea98e42e
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-asm.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4 helper macros for Crypto Extensions
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#define SM4_PREPARE(ptr)					\
+	ld1		{v24.16b-v27.16b}, [ptr], #64;		\
+	ld1		{v28.16b-v31.16b}, [ptr];
+
+#define SM4_CRYPT_BLK_BE(b0)					\
+	sm4e		b0.4s, v24.4s;				\
+	sm4e		b0.4s, v25.4s;				\
+	sm4e		b0.4s, v26.4s;				\
+	sm4e		b0.4s, v27.4s;				\
+	sm4e		b0.4s, v28.4s;				\
+	sm4e		b0.4s, v29.4s;				\
+	sm4e		b0.4s, v30.4s;				\
+	sm4e		b0.4s, v31.4s;				\
+	rev64		b0.4s, b0.4s;				\
+	ext		b0.16b, b0.16b, b0.16b, #8;		\
+	rev32		b0.16b, b0.16b;
+
+#define SM4_CRYPT_BLK(b0)					\
+	rev32		b0.16b, b0.16b;				\
+	SM4_CRYPT_BLK_BE(b0);
+
+#define SM4_CRYPT_BLK2_BE(b0, b1)				\
+	sm4e		b0.4s, v24.4s;				\
+	sm4e		b1.4s, v24.4s;				\
+	sm4e		b0.4s, v25.4s;				\
+	sm4e		b1.4s, v25.4s;				\
+	sm4e		b0.4s, v26.4s;				\
+	sm4e		b1.4s, v26.4s;				\
+	sm4e		b0.4s, v27.4s;				\
+	sm4e		b1.4s, v27.4s;				\
+	sm4e		b0.4s, v28.4s;				\
+	sm4e		b1.4s, v28.4s;				\
+	sm4e		b0.4s, v29.4s;				\
+	sm4e		b1.4s, v29.4s;				\
+	sm4e		b0.4s, v30.4s;				\
+	sm4e		b1.4s, v30.4s;				\
+	sm4e		b0.4s, v31.4s;				\
+	sm4e		b1.4s, v31.4s;				\
+	rev64		b0.4s, b0.4s;				\
+	rev64		b1.4s, b1.4s;				\
+	ext		b0.16b, b0.16b, b0.16b, #8;		\
+	ext		b1.16b, b1.16b, b1.16b, #8;		\
+	rev32		b0.16b, b0.16b;				\
+	rev32		b1.16b, b1.16b;				\
+
+#define SM4_CRYPT_BLK2(b0, b1)					\
+	rev32		b0.16b, b0.16b;				\
+	rev32		b1.16b, b1.16b;				\
+	SM4_CRYPT_BLK2_BE(b0, b1);
+
+#define SM4_CRYPT_BLK4_BE(b0, b1, b2, b3)			\
+	sm4e		b0.4s, v24.4s;				\
+	sm4e		b1.4s, v24.4s;				\
+	sm4e		b2.4s, v24.4s;				\
+	sm4e		b3.4s, v24.4s;				\
+	sm4e		b0.4s, v25.4s;				\
+	sm4e		b1.4s, v25.4s;				\
+	sm4e		b2.4s, v25.4s;				\
+	sm4e		b3.4s, v25.4s;				\
+	sm4e		b0.4s, v26.4s;				\
+	sm4e		b1.4s, v26.4s;				\
+	sm4e		b2.4s, v26.4s;				\
+	sm4e		b3.4s, v26.4s;				\
+	sm4e		b0.4s, v27.4s;				\
+	sm4e		b1.4s, v27.4s;				\
+	sm4e		b2.4s, v27.4s;				\
+	sm4e		b3.4s, v27.4s;				\
+	sm4e		b0.4s, v28.4s;				\
+	sm4e		b1.4s, v28.4s;				\
+	sm4e		b2.4s, v28.4s;				\
+	sm4e		b3.4s, v28.4s;				\
+	sm4e		b0.4s, v29.4s;				\
+	sm4e		b1.4s, v29.4s;				\
+	sm4e		b2.4s, v29.4s;				\
+	sm4e		b3.4s, v29.4s;				\
+	sm4e		b0.4s, v30.4s;				\
+	sm4e		b1.4s, v30.4s;				\
+	sm4e		b2.4s, v30.4s;				\
+	sm4e		b3.4s, v30.4s;				\
+	sm4e		b0.4s, v31.4s;				\
+	sm4e		b1.4s, v31.4s;				\
+	sm4e		b2.4s, v31.4s;				\
+	sm4e		b3.4s, v31.4s;				\
+	rev64		b0.4s, b0.4s;				\
+	rev64		b1.4s, b1.4s;				\
+	rev64		b2.4s, b2.4s;				\
+	rev64		b3.4s, b3.4s;				\
+	ext		b0.16b, b0.16b, b0.16b, #8;		\
+	ext		b1.16b, b1.16b, b1.16b, #8;		\
+	ext		b2.16b, b2.16b, b2.16b, #8;		\
+	ext		b3.16b, b3.16b, b3.16b, #8;		\
+	rev32		b0.16b, b0.16b;				\
+	rev32		b1.16b, b1.16b;				\
+	rev32		b2.16b, b2.16b;				\
+	rev32		b3.16b, b3.16b;
+
+#define SM4_CRYPT_BLK4(b0, b1, b2, b3)				\
+	rev32		b0.16b, b0.16b;				\
+	rev32		b1.16b, b1.16b;				\
+	rev32		b2.16b, b2.16b;				\
+	rev32		b3.16b, b3.16b;				\
+	SM4_CRYPT_BLK4_BE(b0, b1, b2, b3);
+
+#define SM4_CRYPT_BLK8_BE(b0, b1, b2, b3, b4, b5, b6, b7)	\
+	sm4e		b0.4s, v24.4s;				\
+	sm4e		b1.4s, v24.4s;				\
+	sm4e		b2.4s, v24.4s;				\
+	sm4e		b3.4s, v24.4s;				\
+	sm4e		b4.4s, v24.4s;				\
+	sm4e		b5.4s, v24.4s;				\
+	sm4e		b6.4s, v24.4s;				\
+	sm4e		b7.4s, v24.4s;				\
+	sm4e		b0.4s, v25.4s;				\
+	sm4e		b1.4s, v25.4s;				\
+	sm4e		b2.4s, v25.4s;				\
+	sm4e		b3.4s, v25.4s;				\
+	sm4e		b4.4s, v25.4s;				\
+	sm4e		b5.4s, v25.4s;				\
+	sm4e		b6.4s, v25.4s;				\
+	sm4e		b7.4s, v25.4s;				\
+	sm4e		b0.4s, v26.4s;				\
+	sm4e		b1.4s, v26.4s;				\
+	sm4e		b2.4s, v26.4s;				\
+	sm4e		b3.4s, v26.4s;				\
+	sm4e		b4.4s, v26.4s;				\
+	sm4e		b5.4s, v26.4s;				\
+	sm4e		b6.4s, v26.4s;				\
+	sm4e		b7.4s, v26.4s;				\
+	sm4e		b0.4s, v27.4s;				\
+	sm4e		b1.4s, v27.4s;				\
+	sm4e		b2.4s, v27.4s;				\
+	sm4e		b3.4s, v27.4s;				\
+	sm4e		b4.4s, v27.4s;				\
+	sm4e		b5.4s, v27.4s;				\
+	sm4e		b6.4s, v27.4s;				\
+	sm4e		b7.4s, v27.4s;				\
+	sm4e		b0.4s, v28.4s;				\
+	sm4e		b1.4s, v28.4s;				\
+	sm4e		b2.4s, v28.4s;				\
+	sm4e		b3.4s, v28.4s;				\
+	sm4e		b4.4s, v28.4s;				\
+	sm4e		b5.4s, v28.4s;				\
+	sm4e		b6.4s, v28.4s;				\
+	sm4e		b7.4s, v28.4s;				\
+	sm4e		b0.4s, v29.4s;				\
+	sm4e		b1.4s, v29.4s;				\
+	sm4e		b2.4s, v29.4s;				\
+	sm4e		b3.4s, v29.4s;				\
+	sm4e		b4.4s, v29.4s;				\
+	sm4e		b5.4s, v29.4s;				\
+	sm4e		b6.4s, v29.4s;				\
+	sm4e		b7.4s, v29.4s;				\
+	sm4e		b0.4s, v30.4s;				\
+	sm4e		b1.4s, v30.4s;				\
+	sm4e		b2.4s, v30.4s;				\
+	sm4e		b3.4s, v30.4s;				\
+	sm4e		b4.4s, v30.4s;				\
+	sm4e		b5.4s, v30.4s;				\
+	sm4e		b6.4s, v30.4s;				\
+	sm4e		b7.4s, v30.4s;				\
+	sm4e		b0.4s, v31.4s;				\
+	sm4e		b1.4s, v31.4s;				\
+	sm4e		b2.4s, v31.4s;				\
+	sm4e		b3.4s, v31.4s;				\
+	sm4e		b4.4s, v31.4s;				\
+	sm4e		b5.4s, v31.4s;				\
+	sm4e		b6.4s, v31.4s;				\
+	sm4e		b7.4s, v31.4s;				\
+	rev64		b0.4s, b0.4s;				\
+	rev64		b1.4s, b1.4s;				\
+	rev64		b2.4s, b2.4s;				\
+	rev64		b3.4s, b3.4s;				\
+	rev64		b4.4s, b4.4s;				\
+	rev64		b5.4s, b5.4s;				\
+	rev64		b6.4s, b6.4s;				\
+	rev64		b7.4s, b7.4s;				\
+	ext		b0.16b, b0.16b, b0.16b, #8;		\
+	ext		b1.16b, b1.16b, b1.16b, #8;		\
+	ext		b2.16b, b2.16b, b2.16b, #8;		\
+	ext		b3.16b, b3.16b, b3.16b, #8;		\
+	ext		b4.16b, b4.16b, b4.16b, #8;		\
+	ext		b5.16b, b5.16b, b5.16b, #8;		\
+	ext		b6.16b, b6.16b, b6.16b, #8;		\
+	ext		b7.16b, b7.16b, b7.16b, #8;		\
+	rev32		b0.16b, b0.16b;				\
+	rev32		b1.16b, b1.16b;				\
+	rev32		b2.16b, b2.16b;				\
+	rev32		b3.16b, b3.16b;				\
+	rev32		b4.16b, b4.16b;				\
+	rev32		b5.16b, b5.16b;				\
+	rev32		b6.16b, b6.16b;				\
+	rev32		b7.16b, b7.16b;
+
+#define SM4_CRYPT_BLK8(b0, b1, b2, b3, b4, b5, b6, b7)		\
+	rev32		b0.16b, b0.16b;				\
+	rev32		b1.16b, b1.16b;				\
+	rev32		b2.16b, b2.16b;				\
+	rev32		b3.16b, b3.16b;				\
+	rev32		b4.16b, b4.16b;				\
+	rev32		b5.16b, b5.16b;				\
+	rev32		b6.16b, b6.16b;				\
+	rev32		b7.16b, b7.16b;				\
+	SM4_CRYPT_BLK8_BE(b0, b1, b2, b3, b4, b5, b6, b7);
diff --git a/arch/arm64/crypto/sm4-ce-ccm-core.S b/arch/arm64/crypto/sm4-ce-ccm-core.S
new file mode 100644
index 000000000..fa85856f3
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-ccm-core.S
@@ -0,0 +1,329 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4-CCM AEAD Algorithm using ARMv8 Crypto Extensions
+ * as specified in rfc8998
+ * https://datatracker.ietf.org/doc/html/rfc8998
+ *
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+#include "sm4-ce-asm.h"
+
+.arch	armv8-a+crypto
+
+.irp b, 0, 1, 8, 9, 10, 11, 12, 13, 14, 15, 16, 24, 25, 26, 27, 28, 29, 30, 31
+	.set .Lv\b\().4s, \b
+.endr
+
+.macro sm4e, vd, vn
+	.inst 0xcec08400 | (.L\vn << 5) | .L\vd
+.endm
+
+/* Register macros */
+
+#define RMAC	v16
+
+/* Helper macros. */
+
+#define inc_le128(vctr)					\
+		mov		vctr.d[1], x8;		\
+		mov		vctr.d[0], x7;		\
+		adds		x8, x8, #1;		\
+		rev64		vctr.16b, vctr.16b;	\
+		adc		x7, x7, xzr;
+
+
+.align 3
+SYM_FUNC_START(sm4_ce_cbcmac_update)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: mac
+	 *   x2: src
+	 *   w3: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RMAC.16b}, [x1]
+
+.Lcbcmac_loop_4x:
+	cmp		w3, #4
+	blt		.Lcbcmac_loop_1x
+
+	sub		w3, w3, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v0.16b
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v1.16b
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v2.16b
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v3.16b
+
+	cbz		w3, .Lcbcmac_end
+	b		.Lcbcmac_loop_4x
+
+.Lcbcmac_loop_1x:
+	sub		w3, w3, #1
+
+	ld1		{v0.16b}, [x2], #16
+
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v0.16b
+
+	cbnz		w3, .Lcbcmac_loop_1x
+
+.Lcbcmac_end:
+	st1		{RMAC.16b}, [x1]
+	ret
+SYM_FUNC_END(sm4_ce_cbcmac_update)
+
+.align 3
+SYM_FUNC_START(sm4_ce_ccm_final)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: ctr0 (big endian, 128 bit)
+	 *   x2: mac
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RMAC.16b}, [x2]
+	ld1		{v0.16b}, [x1]
+
+	SM4_CRYPT_BLK2(RMAC, v0)
+
+	/* en-/decrypt the mac with ctr0 */
+	eor		RMAC.16b, RMAC.16b, v0.16b
+	st1		{RMAC.16b}, [x2]
+
+	ret
+SYM_FUNC_END(sm4_ce_ccm_final)
+
+.align 3
+SYM_TYPED_FUNC_START(sm4_ce_ccm_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: ctr (big endian, 128 bit)
+	 *   w4: nbytes
+	 *   x5: mac
+	 */
+	SM4_PREPARE(x0)
+
+	ldp		x7, x8, [x3]
+	rev		x7, x7
+	rev		x8, x8
+
+	ld1		{RMAC.16b}, [x5]
+
+.Lccm_enc_loop_4x:
+	cmp		w4, #(4 * 16)
+	blt		.Lccm_enc_loop_1x
+
+	sub		w4, w4, #(4 * 16)
+
+	/* construct CTRs */
+	inc_le128(v8)			/* +0 */
+	inc_le128(v9)			/* +1 */
+	inc_le128(v10)			/* +2 */
+	inc_le128(v11)			/* +3 */
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	SM4_CRYPT_BLK2(v8, RMAC)
+	eor		v8.16b, v8.16b, v0.16b
+	eor		RMAC.16b, RMAC.16b, v0.16b
+	SM4_CRYPT_BLK2(v9, RMAC)
+	eor		v9.16b, v9.16b, v1.16b
+	eor		RMAC.16b, RMAC.16b, v1.16b
+	SM4_CRYPT_BLK2(v10, RMAC)
+	eor		v10.16b, v10.16b, v2.16b
+	eor		RMAC.16b, RMAC.16b, v2.16b
+	SM4_CRYPT_BLK2(v11, RMAC)
+	eor		v11.16b, v11.16b, v3.16b
+	eor		RMAC.16b, RMAC.16b, v3.16b
+
+	st1		{v8.16b-v11.16b}, [x1], #64
+
+	cbz		w4, .Lccm_enc_end
+	b		.Lccm_enc_loop_4x
+
+.Lccm_enc_loop_1x:
+	cmp		w4, #16
+	blt		.Lccm_enc_tail
+
+	sub		w4, w4, #16
+
+	/* construct CTRs */
+	inc_le128(v8)
+
+	ld1		{v0.16b}, [x2], #16
+
+	SM4_CRYPT_BLK2(v8, RMAC)
+	eor		v8.16b, v8.16b, v0.16b
+	eor		RMAC.16b, RMAC.16b, v0.16b
+
+	st1		{v8.16b}, [x1], #16
+
+	cbz		w4, .Lccm_enc_end
+	b		.Lccm_enc_loop_1x
+
+.Lccm_enc_tail:
+	/* construct CTRs */
+	inc_le128(v8)
+
+	SM4_CRYPT_BLK2(RMAC, v8)
+
+	/* store new MAC */
+	st1		{RMAC.16b}, [x5]
+
+.Lccm_enc_tail_loop:
+	ldrb		w0, [x2], #1		/* get 1 byte from input */
+	umov		w9, v8.b[0]		/* get top crypted CTR byte */
+	umov		w6, RMAC.b[0]		/* get top MAC byte */
+
+	eor		w9, w9, w0		/* w9 = CTR ^ input */
+	eor		w6, w6, w0		/* w6 = MAC ^ input */
+
+	strb		w9, [x1], #1		/* store out byte */
+	strb		w6, [x5], #1		/* store MAC byte */
+
+	subs		w4, w4, #1
+	beq		.Lccm_enc_ret
+
+	/* shift out one byte */
+	ext		RMAC.16b, RMAC.16b, RMAC.16b, #1
+	ext		v8.16b, v8.16b, v8.16b, #1
+
+	b		.Lccm_enc_tail_loop
+
+.Lccm_enc_end:
+	/* store new MAC */
+	st1		{RMAC.16b}, [x5]
+
+	/* store new CTR */
+	rev		x7, x7
+	rev		x8, x8
+	stp		x7, x8, [x3]
+
+.Lccm_enc_ret:
+	ret
+SYM_FUNC_END(sm4_ce_ccm_enc)
+
+.align 3
+SYM_TYPED_FUNC_START(sm4_ce_ccm_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: ctr (big endian, 128 bit)
+	 *   w4: nbytes
+	 *   x5: mac
+	 */
+	SM4_PREPARE(x0)
+
+	ldp		x7, x8, [x3]
+	rev		x7, x7
+	rev		x8, x8
+
+	ld1		{RMAC.16b}, [x5]
+
+.Lccm_dec_loop_4x:
+	cmp		w4, #(4 * 16)
+	blt		.Lccm_dec_loop_1x
+
+	sub		w4, w4, #(4 * 16)
+
+	/* construct CTRs */
+	inc_le128(v8)			/* +0 */
+	inc_le128(v9)			/* +1 */
+	inc_le128(v10)			/* +2 */
+	inc_le128(v11)			/* +3 */
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	SM4_CRYPT_BLK2(v8, RMAC)
+	eor		v8.16b, v8.16b, v0.16b
+	eor		RMAC.16b, RMAC.16b, v8.16b
+	SM4_CRYPT_BLK2(v9, RMAC)
+	eor		v9.16b, v9.16b, v1.16b
+	eor		RMAC.16b, RMAC.16b, v9.16b
+	SM4_CRYPT_BLK2(v10, RMAC)
+	eor		v10.16b, v10.16b, v2.16b
+	eor		RMAC.16b, RMAC.16b, v10.16b
+	SM4_CRYPT_BLK2(v11, RMAC)
+	eor		v11.16b, v11.16b, v3.16b
+	eor		RMAC.16b, RMAC.16b, v11.16b
+
+	st1		{v8.16b-v11.16b}, [x1], #64
+
+	cbz		w4, .Lccm_dec_end
+	b		.Lccm_dec_loop_4x
+
+.Lccm_dec_loop_1x:
+	cmp		w4, #16
+	blt		.Lccm_dec_tail
+
+	sub		w4, w4, #16
+
+	/* construct CTRs */
+	inc_le128(v8)
+
+	ld1		{v0.16b}, [x2], #16
+
+	SM4_CRYPT_BLK2(v8, RMAC)
+	eor		v8.16b, v8.16b, v0.16b
+	eor		RMAC.16b, RMAC.16b, v8.16b
+
+	st1		{v8.16b}, [x1], #16
+
+	cbz		w4, .Lccm_dec_end
+	b		.Lccm_dec_loop_1x
+
+.Lccm_dec_tail:
+	/* construct CTRs */
+	inc_le128(v8)
+
+	SM4_CRYPT_BLK2(RMAC, v8)
+
+	/* store new MAC */
+	st1		{RMAC.16b}, [x5]
+
+.Lccm_dec_tail_loop:
+	ldrb		w0, [x2], #1		/* get 1 byte from input */
+	umov		w9, v8.b[0]		/* get top crypted CTR byte */
+	umov		w6, RMAC.b[0]		/* get top MAC byte */
+
+	eor		w9, w9, w0		/* w9 = CTR ^ input */
+	eor		w6, w6, w9		/* w6 = MAC ^ output */
+
+	strb		w9, [x1], #1		/* store out byte */
+	strb		w6, [x5], #1		/* store MAC byte */
+
+	subs		w4, w4, #1
+	beq		.Lccm_dec_ret
+
+	/* shift out one byte */
+	ext		RMAC.16b, RMAC.16b, RMAC.16b, #1
+	ext		v8.16b, v8.16b, v8.16b, #1
+
+	b		.Lccm_dec_tail_loop
+
+.Lccm_dec_end:
+	/* store new MAC */
+	st1		{RMAC.16b}, [x5]
+
+	/* store new CTR */
+	rev		x7, x7
+	rev		x8, x8
+	stp		x7, x8, [x3]
+
+.Lccm_dec_ret:
+	ret
+SYM_FUNC_END(sm4_ce_ccm_dec)
diff --git a/arch/arm64/crypto/sm4-ce-ccm-glue.c b/arch/arm64/crypto/sm4-ce-ccm-glue.c
new file mode 100644
index 000000000..5e7e17bbe
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-ccm-glue.c
@@ -0,0 +1,307 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4-CCM AEAD Algorithm using ARMv8 Crypto Extensions
+ * as specified in rfc8998
+ * https://datatracker.ietf.org/doc/html/rfc8998
+ *
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/cpufeature.h>
+#include <asm/neon.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/sm4.h>
+#include "sm4-ce.h"
+
+asmlinkage void sm4_ce_cbcmac_update(const u32 *rkey_enc, u8 *mac,
+				     const u8 *src, unsigned int nblocks);
+asmlinkage void sm4_ce_ccm_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nbytes, u8 *mac);
+asmlinkage void sm4_ce_ccm_dec(const u32 *rkey_enc, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nbytes, u8 *mac);
+asmlinkage void sm4_ce_ccm_final(const u32 *rkey_enc, u8 *iv, u8 *mac);
+
+
+static int ccm_setkey(struct crypto_aead *tfm, const u8 *key,
+		      unsigned int key_len)
+{
+	struct sm4_ctx *ctx = crypto_aead_ctx(tfm);
+
+	if (key_len != SM4_KEY_SIZE)
+		return -EINVAL;
+
+	kernel_neon_begin();
+	sm4_ce_expand_key(key, ctx->rkey_enc, ctx->rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int ccm_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	if ((authsize & 1) || authsize < 4)
+		return -EINVAL;
+	return 0;
+}
+
+static int ccm_format_input(u8 info[], struct aead_request *req,
+			    unsigned int msglen)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	unsigned int l = req->iv[0] + 1;
+	unsigned int m;
+	__be32 len;
+
+	/* verify that CCM dimension 'L': 2 <= L <= 8 */
+	if (l < 2 || l > 8)
+		return -EINVAL;
+	if (l < 4 && msglen >> (8 * l))
+		return -EOVERFLOW;
+
+	memset(&req->iv[SM4_BLOCK_SIZE - l], 0, l);
+
+	memcpy(info, req->iv, SM4_BLOCK_SIZE);
+
+	m = crypto_aead_authsize(aead);
+
+	/* format flags field per RFC 3610/NIST 800-38C */
+	*info |= ((m - 2) / 2) << 3;
+	if (req->assoclen)
+		*info |= (1 << 6);
+
+	/*
+	 * format message length field,
+	 * Linux uses a u32 type to represent msglen
+	 */
+	if (l >= 4)
+		l = 4;
+
+	len = cpu_to_be32(msglen);
+	memcpy(&info[SM4_BLOCK_SIZE - l], (u8 *)&len + 4 - l, l);
+
+	return 0;
+}
+
+static void ccm_calculate_auth_mac(struct aead_request *req, u8 mac[])
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_aead_ctx(aead);
+	struct __packed { __be16 l; __be32 h; } aadlen;
+	u32 assoclen = req->assoclen;
+	struct scatter_walk walk;
+	unsigned int len;
+
+	if (assoclen < 0xff00) {
+		aadlen.l = cpu_to_be16(assoclen);
+		len = 2;
+	} else {
+		aadlen.l = cpu_to_be16(0xfffe);
+		put_unaligned_be32(assoclen, &aadlen.h);
+		len = 6;
+	}
+
+	sm4_ce_crypt_block(ctx->rkey_enc, mac, mac);
+	crypto_xor(mac, (const u8 *)&aadlen, len);
+
+	scatterwalk_start(&walk, req->src);
+
+	do {
+		u32 n = scatterwalk_clamp(&walk, assoclen);
+		u8 *p, *ptr;
+
+		if (!n) {
+			scatterwalk_start(&walk, sg_next(walk.sg));
+			n = scatterwalk_clamp(&walk, assoclen);
+		}
+
+		p = ptr = scatterwalk_map(&walk);
+		assoclen -= n;
+		scatterwalk_advance(&walk, n);
+
+		while (n > 0) {
+			unsigned int l, nblocks;
+
+			if (len == SM4_BLOCK_SIZE) {
+				if (n < SM4_BLOCK_SIZE) {
+					sm4_ce_crypt_block(ctx->rkey_enc,
+							   mac, mac);
+
+					len = 0;
+				} else {
+					nblocks = n / SM4_BLOCK_SIZE;
+					sm4_ce_cbcmac_update(ctx->rkey_enc,
+							     mac, ptr, nblocks);
+
+					ptr += nblocks * SM4_BLOCK_SIZE;
+					n %= SM4_BLOCK_SIZE;
+
+					continue;
+				}
+			}
+
+			l = min(n, SM4_BLOCK_SIZE - len);
+			if (l) {
+				crypto_xor(mac + len, ptr, l);
+				len += l;
+				ptr += l;
+				n -= l;
+			}
+		}
+
+		scatterwalk_unmap(p);
+		scatterwalk_done(&walk, 0, assoclen);
+	} while (assoclen);
+}
+
+static int ccm_crypt(struct aead_request *req, struct skcipher_walk *walk,
+		     u32 *rkey_enc, u8 mac[],
+		     void (*sm4_ce_ccm_crypt)(const u32 *rkey_enc, u8 *dst,
+					const u8 *src, u8 *iv,
+					unsigned int nbytes, u8 *mac))
+{
+	u8 __aligned(8) ctr0[SM4_BLOCK_SIZE];
+	int err = 0;
+
+	/* preserve the initial ctr0 for the TAG */
+	memcpy(ctr0, walk->iv, SM4_BLOCK_SIZE);
+	crypto_inc(walk->iv, SM4_BLOCK_SIZE);
+
+	kernel_neon_begin();
+
+	if (req->assoclen)
+		ccm_calculate_auth_mac(req, mac);
+
+	while (walk->nbytes && walk->nbytes != walk->total) {
+		unsigned int tail = walk->nbytes % SM4_BLOCK_SIZE;
+
+		sm4_ce_ccm_crypt(rkey_enc, walk->dst.virt.addr,
+				 walk->src.virt.addr, walk->iv,
+				 walk->nbytes - tail, mac);
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(walk, tail);
+
+		kernel_neon_begin();
+	}
+
+	if (walk->nbytes) {
+		sm4_ce_ccm_crypt(rkey_enc, walk->dst.virt.addr,
+				 walk->src.virt.addr, walk->iv,
+				 walk->nbytes, mac);
+
+		sm4_ce_ccm_final(rkey_enc, ctr0, mac);
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(walk, 0);
+	} else {
+		sm4_ce_ccm_final(rkey_enc, ctr0, mac);
+
+		kernel_neon_end();
+	}
+
+	return err;
+}
+
+static int ccm_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_aead_ctx(aead);
+	u8 __aligned(8) mac[SM4_BLOCK_SIZE];
+	struct skcipher_walk walk;
+	int err;
+
+	err = ccm_format_input(mac, req, req->cryptlen);
+	if (err)
+		return err;
+
+	err = skcipher_walk_aead_encrypt(&walk, req, false);
+	if (err)
+		return err;
+
+	err = ccm_crypt(req, &walk, ctx->rkey_enc, mac, sm4_ce_ccm_enc);
+	if (err)
+		return err;
+
+	/* copy authtag to end of dst */
+	scatterwalk_map_and_copy(mac, req->dst, req->assoclen + req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return 0;
+}
+
+static int ccm_decrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	unsigned int authsize = crypto_aead_authsize(aead);
+	struct sm4_ctx *ctx = crypto_aead_ctx(aead);
+	u8 __aligned(8) mac[SM4_BLOCK_SIZE];
+	u8 authtag[SM4_BLOCK_SIZE];
+	struct skcipher_walk walk;
+	int err;
+
+	err = ccm_format_input(mac, req, req->cryptlen - authsize);
+	if (err)
+		return err;
+
+	err = skcipher_walk_aead_decrypt(&walk, req, false);
+	if (err)
+		return err;
+
+	err = ccm_crypt(req, &walk, ctx->rkey_enc, mac, sm4_ce_ccm_dec);
+	if (err)
+		return err;
+
+	/* compare calculated auth tag with the stored one */
+	scatterwalk_map_and_copy(authtag, req->src,
+				 req->assoclen + req->cryptlen - authsize,
+				 authsize, 0);
+
+	if (crypto_memneq(authtag, mac, authsize))
+		return -EBADMSG;
+
+	return 0;
+}
+
+static struct aead_alg sm4_ccm_alg = {
+	.base = {
+		.cra_name		= "ccm(sm4)",
+		.cra_driver_name	= "ccm-sm4-ce",
+		.cra_priority		= 400,
+		.cra_blocksize		= 1,
+		.cra_ctxsize		= sizeof(struct sm4_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.ivsize		= SM4_BLOCK_SIZE,
+	.chunksize	= SM4_BLOCK_SIZE,
+	.maxauthsize	= SM4_BLOCK_SIZE,
+	.setkey		= ccm_setkey,
+	.setauthsize	= ccm_setauthsize,
+	.encrypt	= ccm_encrypt,
+	.decrypt	= ccm_decrypt,
+};
+
+static int __init sm4_ce_ccm_init(void)
+{
+	return crypto_register_aead(&sm4_ccm_alg);
+}
+
+static void __exit sm4_ce_ccm_exit(void)
+{
+	crypto_unregister_aead(&sm4_ccm_alg);
+}
+
+module_cpu_feature_match(SM4, sm4_ce_ccm_init);
+module_exit(sm4_ce_ccm_exit);
+
+MODULE_DESCRIPTION("Synchronous SM4 in CCM mode using ARMv8 Crypto Extensions");
+MODULE_ALIAS_CRYPTO("ccm(sm4)");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/crypto/sm4-ce-cipher-core.S b/arch/arm64/crypto/sm4-ce-cipher-core.S
new file mode 100644
index 000000000..4ac6cfbc5
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-cipher-core.S
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+	.irp		b, 0, 1, 2, 3, 4, 5, 6, 7, 8
+	.set		.Lv\b\().4s, \b
+	.endr
+
+	.macro		sm4e, rd, rn
+	.inst		0xcec08400 | .L\rd | (.L\rn << 5)
+	.endm
+
+	/*
+	 * void sm4_ce_do_crypt(const u32 *rk, u32 *out, const u32 *in);
+	 */
+	.text
+SYM_FUNC_START(sm4_ce_do_crypt)
+	ld1		{v8.4s}, [x2]
+	ld1		{v0.4s-v3.4s}, [x0], #64
+CPU_LE(	rev32		v8.16b, v8.16b		)
+	ld1		{v4.4s-v7.4s}, [x0]
+	sm4e		v8.4s, v0.4s
+	sm4e		v8.4s, v1.4s
+	sm4e		v8.4s, v2.4s
+	sm4e		v8.4s, v3.4s
+	sm4e		v8.4s, v4.4s
+	sm4e		v8.4s, v5.4s
+	sm4e		v8.4s, v6.4s
+	sm4e		v8.4s, v7.4s
+	rev64		v8.4s, v8.4s
+	ext		v8.16b, v8.16b, v8.16b, #8
+CPU_LE(	rev32		v8.16b, v8.16b		)
+	st1		{v8.4s}, [x1]
+	ret
+SYM_FUNC_END(sm4_ce_do_crypt)
diff --git a/arch/arm64/crypto/sm4-ce-cipher-glue.c b/arch/arm64/crypto/sm4-ce-cipher-glue.c
new file mode 100644
index 000000000..c31d76fb5
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-cipher-glue.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/algapi.h>
+#include <crypto/sm4.h>
+#include <crypto/internal/simd.h>
+#include <linux/module.h>
+#include <linux/cpufeature.h>
+#include <linux/types.h>
+
+MODULE_ALIAS_CRYPTO("sm4");
+MODULE_ALIAS_CRYPTO("sm4-ce");
+MODULE_DESCRIPTION("SM4 symmetric cipher using ARMv8 Crypto Extensions");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
+MODULE_LICENSE("GPL v2");
+
+asmlinkage void sm4_ce_do_crypt(const u32 *rk, void *out, const void *in);
+
+static int sm4_ce_setkey(struct crypto_tfm *tfm, const u8 *key,
+		       unsigned int key_len)
+{
+	struct sm4_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	return sm4_expandkey(ctx, key, key_len);
+}
+
+static void sm4_ce_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+	const struct sm4_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (!crypto_simd_usable()) {
+		sm4_crypt_block(ctx->rkey_enc, out, in);
+	} else {
+		kernel_neon_begin();
+		sm4_ce_do_crypt(ctx->rkey_enc, out, in);
+		kernel_neon_end();
+	}
+}
+
+static void sm4_ce_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+	const struct sm4_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (!crypto_simd_usable()) {
+		sm4_crypt_block(ctx->rkey_dec, out, in);
+	} else {
+		kernel_neon_begin();
+		sm4_ce_do_crypt(ctx->rkey_dec, out, in);
+		kernel_neon_end();
+	}
+}
+
+static struct crypto_alg sm4_ce_alg = {
+	.cra_name			= "sm4",
+	.cra_driver_name		= "sm4-ce",
+	.cra_priority			= 300,
+	.cra_flags			= CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize			= SM4_BLOCK_SIZE,
+	.cra_ctxsize			= sizeof(struct sm4_ctx),
+	.cra_module			= THIS_MODULE,
+	.cra_u.cipher = {
+		.cia_min_keysize	= SM4_KEY_SIZE,
+		.cia_max_keysize	= SM4_KEY_SIZE,
+		.cia_setkey		= sm4_ce_setkey,
+		.cia_encrypt		= sm4_ce_encrypt,
+		.cia_decrypt		= sm4_ce_decrypt
+	}
+};
+
+static int __init sm4_ce_mod_init(void)
+{
+	return crypto_register_alg(&sm4_ce_alg);
+}
+
+static void __exit sm4_ce_mod_fini(void)
+{
+	crypto_unregister_alg(&sm4_ce_alg);
+}
+
+module_cpu_feature_match(SM4, sm4_ce_mod_init);
+module_exit(sm4_ce_mod_fini);
diff --git a/arch/arm64/crypto/sm4-ce-core.S b/arch/arm64/crypto/sm4-ce-core.S
new file mode 100644
index 000000000..877b80c54
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-core.S
@@ -0,0 +1,1093 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4 Cipher Algorithm for ARMv8 with Crypto Extensions
+ * as specified in
+ * https://tools.ietf.org/id/draft-ribose-cfrg-sm4-10.html
+ *
+ * Copyright (C) 2022, Alibaba Group.
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include "sm4-ce-asm.h"
+
+.arch	armv8-a+crypto
+
+.irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, \
+		20, 24, 25, 26, 27, 28, 29, 30, 31
+	.set .Lv\b\().4s, \b
+.endr
+
+.macro sm4e, vd, vn
+	.inst 0xcec08400 | (.L\vn << 5) | .L\vd
+.endm
+
+.macro sm4ekey, vd, vn, vm
+	.inst 0xce60c800 | (.L\vm << 16) | (.L\vn << 5) | .L\vd
+.endm
+
+/* Register macros */
+
+#define RTMP0	v16
+#define RTMP1	v17
+#define RTMP2	v18
+#define RTMP3	v19
+
+#define RIV	v20
+#define RMAC	v20
+#define RMASK	v21
+
+
+.align 3
+SYM_FUNC_START(sm4_ce_expand_key)
+	/* input:
+	 *   x0: 128-bit key
+	 *   x1: rkey_enc
+	 *   x2: rkey_dec
+	 *   x3: fk array
+	 *   x4: ck array
+	 */
+	ld1		{v0.16b}, [x0];
+	rev32		v0.16b, v0.16b;
+	ld1		{v1.16b}, [x3];
+	/* load ck */
+	ld1		{v24.16b-v27.16b}, [x4], #64;
+	ld1		{v28.16b-v31.16b}, [x4];
+
+	/* input ^ fk */
+	eor		v0.16b, v0.16b, v1.16b;
+
+	sm4ekey		v0.4s, v0.4s, v24.4s;
+	sm4ekey		v1.4s, v0.4s, v25.4s;
+	sm4ekey		v2.4s, v1.4s, v26.4s;
+	sm4ekey		v3.4s, v2.4s, v27.4s;
+	sm4ekey		v4.4s, v3.4s, v28.4s;
+	sm4ekey		v5.4s, v4.4s, v29.4s;
+	sm4ekey		v6.4s, v5.4s, v30.4s;
+	sm4ekey		v7.4s, v6.4s, v31.4s;
+
+	adr_l		x5, .Lbswap128_mask
+	ld1		{v24.16b}, [x5]
+
+	st1		{v0.16b-v3.16b}, [x1], #64;
+	st1		{v4.16b-v7.16b}, [x1];
+
+	tbl		v16.16b, {v7.16b}, v24.16b
+	tbl		v17.16b, {v6.16b}, v24.16b
+	tbl		v18.16b, {v5.16b}, v24.16b
+	tbl		v19.16b, {v4.16b}, v24.16b
+	tbl		v20.16b, {v3.16b}, v24.16b
+	tbl		v21.16b, {v2.16b}, v24.16b
+	tbl		v22.16b, {v1.16b}, v24.16b
+	tbl		v23.16b, {v0.16b}, v24.16b
+
+	st1		{v16.16b-v19.16b}, [x2], #64
+	st1		{v20.16b-v23.16b}, [x2]
+
+	ret;
+SYM_FUNC_END(sm4_ce_expand_key)
+
+.align 3
+SYM_FUNC_START(sm4_ce_crypt_block)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{v0.16b}, [x2];
+	SM4_CRYPT_BLK(v0);
+	st1		{v0.16b}, [x1];
+
+	ret;
+SYM_FUNC_END(sm4_ce_crypt_block)
+
+.align 3
+SYM_FUNC_START(sm4_ce_crypt)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   w3: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+.Lcrypt_loop_blk:
+	sub		w3, w3, #8;
+	tbnz		w3, #31, .Lcrypt_tail8;
+
+	ld1		{v0.16b-v3.16b}, [x2], #64;
+	ld1		{v4.16b-v7.16b}, [x2], #64;
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7);
+
+	st1		{v0.16b-v3.16b}, [x1], #64;
+	st1		{v4.16b-v7.16b}, [x1], #64;
+
+	cbz		w3, .Lcrypt_end;
+	b		.Lcrypt_loop_blk;
+
+.Lcrypt_tail8:
+	add		w3, w3, #8;
+	cmp		w3, #4;
+	blt		.Lcrypt_tail4;
+
+	sub		w3, w3, #4;
+
+	ld1		{v0.16b-v3.16b}, [x2], #64;
+	SM4_CRYPT_BLK4(v0, v1, v2, v3);
+	st1		{v0.16b-v3.16b}, [x1], #64;
+
+	cbz		w3, .Lcrypt_end;
+
+.Lcrypt_tail4:
+	sub		w3, w3, #1;
+
+	ld1		{v0.16b}, [x2], #16;
+	SM4_CRYPT_BLK(v0);
+	st1		{v0.16b}, [x1], #16;
+
+	cbnz		w3, .Lcrypt_tail4;
+
+.Lcrypt_end:
+	ret;
+SYM_FUNC_END(sm4_ce_crypt)
+
+.align 3
+SYM_FUNC_START(sm4_ce_cbc_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RIV.16b}, [x3]
+
+.Lcbc_enc_loop_4x:
+	cmp		w4, #4
+	blt		.Lcbc_enc_loop_1x
+
+	sub		w4, w4, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	eor		v0.16b, v0.16b, RIV.16b
+	SM4_CRYPT_BLK(v0)
+	eor		v1.16b, v1.16b, v0.16b
+	SM4_CRYPT_BLK(v1)
+	eor		v2.16b, v2.16b, v1.16b
+	SM4_CRYPT_BLK(v2)
+	eor		v3.16b, v3.16b, v2.16b
+	SM4_CRYPT_BLK(v3)
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	mov		RIV.16b, v3.16b
+
+	cbz		w4, .Lcbc_enc_end
+	b		.Lcbc_enc_loop_4x
+
+.Lcbc_enc_loop_1x:
+	sub		w4, w4, #1
+
+	ld1		{v0.16b}, [x2], #16
+
+	eor		RIV.16b, RIV.16b, v0.16b
+	SM4_CRYPT_BLK(RIV)
+
+	st1		{RIV.16b}, [x1], #16
+
+	cbnz		w4, .Lcbc_enc_loop_1x
+
+.Lcbc_enc_end:
+	/* store new IV */
+	st1		{RIV.16b}, [x3]
+
+	ret
+SYM_FUNC_END(sm4_ce_cbc_enc)
+
+.align 3
+SYM_FUNC_START(sm4_ce_cbc_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RIV.16b}, [x3]
+
+.Lcbc_dec_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lcbc_dec_4x
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+	ld1		{v4.16b-v7.16b}, [x2], #64
+
+	rev32		v8.16b, v0.16b
+	rev32		v9.16b, v1.16b
+	rev32		v10.16b, v2.16b
+	rev32		v11.16b, v3.16b
+	rev32		v12.16b, v4.16b
+	rev32		v13.16b, v5.16b
+	rev32		v14.16b, v6.16b
+	rev32		v15.16b, v7.16b
+
+	SM4_CRYPT_BLK8_BE(v8, v9, v10, v11, v12, v13, v14, v15)
+
+	eor		v8.16b, v8.16b, RIV.16b
+	eor		v9.16b, v9.16b, v0.16b
+	eor		v10.16b, v10.16b, v1.16b
+	eor		v11.16b, v11.16b, v2.16b
+	eor		v12.16b, v12.16b, v3.16b
+	eor		v13.16b, v13.16b, v4.16b
+	eor		v14.16b, v14.16b, v5.16b
+	eor		v15.16b, v15.16b, v6.16b
+
+	st1		{v8.16b-v11.16b}, [x1], #64
+	st1		{v12.16b-v15.16b}, [x1], #64
+
+	mov		RIV.16b, v7.16b
+
+	cbz		w4, .Lcbc_dec_end
+	b		.Lcbc_dec_loop_8x
+
+.Lcbc_dec_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lcbc_dec_loop_1x
+
+	sub		w4, w4, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	rev32		v8.16b, v0.16b
+	rev32		v9.16b, v1.16b
+	rev32		v10.16b, v2.16b
+	rev32		v11.16b, v3.16b
+
+	SM4_CRYPT_BLK4_BE(v8, v9, v10, v11)
+
+	eor		v8.16b, v8.16b, RIV.16b
+	eor		v9.16b, v9.16b, v0.16b
+	eor		v10.16b, v10.16b, v1.16b
+	eor		v11.16b, v11.16b, v2.16b
+
+	st1		{v8.16b-v11.16b}, [x1], #64
+
+	mov		RIV.16b, v3.16b
+
+	cbz		w4, .Lcbc_dec_end
+
+.Lcbc_dec_loop_1x:
+	sub		w4, w4, #1
+
+	ld1		{v0.16b}, [x2], #16
+
+	rev32		v8.16b, v0.16b
+
+	SM4_CRYPT_BLK_BE(v8)
+
+	eor		v8.16b, v8.16b, RIV.16b
+	st1		{v8.16b}, [x1], #16
+
+	mov		RIV.16b, v0.16b
+
+	cbnz		w4, .Lcbc_dec_loop_1x
+
+.Lcbc_dec_end:
+	/* store new IV */
+	st1		{RIV.16b}, [x3]
+
+	ret
+SYM_FUNC_END(sm4_ce_cbc_dec)
+
+.align 3
+SYM_FUNC_START(sm4_ce_cbc_cts_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nbytes
+	 */
+	SM4_PREPARE(x0)
+
+	sub		w5, w4, #16
+	uxtw		x5, w5
+
+	ld1		{RIV.16b}, [x3]
+
+	ld1		{v0.16b}, [x2]
+	eor		RIV.16b, RIV.16b, v0.16b
+	SM4_CRYPT_BLK(RIV)
+
+	/* load permute table */
+	adr_l		x6, .Lcts_permute_table
+	add		x7, x6, #32
+	add		x6, x6, x5
+	sub		x7, x7, x5
+	ld1		{v3.16b}, [x6]
+	ld1		{v4.16b}, [x7]
+
+	/* overlapping loads */
+	add		x2, x2, x5
+	ld1		{v1.16b}, [x2]
+
+	/* create Cn from En-1 */
+	tbl		v0.16b, {RIV.16b}, v3.16b
+	/* padding Pn with zeros */
+	tbl		v1.16b, {v1.16b}, v4.16b
+
+	eor		v1.16b, v1.16b, RIV.16b
+	SM4_CRYPT_BLK(v1)
+
+	/* overlapping stores */
+	add		x5, x1, x5
+	st1		{v0.16b}, [x5]
+	st1		{v1.16b}, [x1]
+
+	ret
+SYM_FUNC_END(sm4_ce_cbc_cts_enc)
+
+.align 3
+SYM_FUNC_START(sm4_ce_cbc_cts_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nbytes
+	 */
+	SM4_PREPARE(x0)
+
+	sub		w5, w4, #16
+	uxtw		x5, w5
+
+	ld1		{RIV.16b}, [x3]
+
+	/* load permute table */
+	adr_l		x6, .Lcts_permute_table
+	add		x7, x6, #32
+	add		x6, x6, x5
+	sub		x7, x7, x5
+	ld1		{v3.16b}, [x6]
+	ld1		{v4.16b}, [x7]
+
+	/* overlapping loads */
+	ld1		{v0.16b}, [x2], x5
+	ld1		{v1.16b}, [x2]
+
+	SM4_CRYPT_BLK(v0)
+	/* select the first Ln bytes of Xn to create Pn */
+	tbl		v2.16b, {v0.16b}, v3.16b
+	eor		v2.16b, v2.16b, v1.16b
+
+	/* overwrite the first Ln bytes with Cn to create En-1 */
+	tbx		v0.16b, {v1.16b}, v4.16b
+	SM4_CRYPT_BLK(v0)
+	eor		v0.16b, v0.16b, RIV.16b
+
+	/* overlapping stores */
+	add		x5, x1, x5
+	st1		{v2.16b}, [x5]
+	st1		{v0.16b}, [x1]
+
+	ret
+SYM_FUNC_END(sm4_ce_cbc_cts_dec)
+
+.align 3
+SYM_FUNC_START(sm4_ce_cfb_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RIV.16b}, [x3]
+
+.Lcfb_enc_loop_4x:
+	cmp		w4, #4
+	blt		.Lcfb_enc_loop_1x
+
+	sub		w4, w4, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	rev32		v8.16b, RIV.16b
+	SM4_CRYPT_BLK_BE(v8)
+	eor		v0.16b, v0.16b, v8.16b
+
+	rev32		v8.16b, v0.16b
+	SM4_CRYPT_BLK_BE(v8)
+	eor		v1.16b, v1.16b, v8.16b
+
+	rev32		v8.16b, v1.16b
+	SM4_CRYPT_BLK_BE(v8)
+	eor		v2.16b, v2.16b, v8.16b
+
+	rev32		v8.16b, v2.16b
+	SM4_CRYPT_BLK_BE(v8)
+	eor		v3.16b, v3.16b, v8.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	mov		RIV.16b, v3.16b
+
+	cbz		w4, .Lcfb_enc_end
+	b		.Lcfb_enc_loop_4x
+
+.Lcfb_enc_loop_1x:
+	sub		w4, w4, #1
+
+	ld1		{v0.16b}, [x2], #16
+
+	SM4_CRYPT_BLK(RIV)
+	eor		RIV.16b, RIV.16b, v0.16b
+
+	st1		{RIV.16b}, [x1], #16
+
+	cbnz		w4, .Lcfb_enc_loop_1x
+
+.Lcfb_enc_end:
+	/* store new IV */
+	st1		{RIV.16b}, [x3]
+
+	ret
+SYM_FUNC_END(sm4_ce_cfb_enc)
+
+.align 3
+SYM_FUNC_START(sm4_ce_cfb_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RIV.16b}, [x3]
+
+.Lcfb_dec_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lcfb_dec_4x
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+	ld1		{v4.16b-v7.16b}, [x2], #64
+
+	rev32		v8.16b, RIV.16b
+	rev32		v9.16b, v0.16b
+	rev32		v10.16b, v1.16b
+	rev32		v11.16b, v2.16b
+	rev32		v12.16b, v3.16b
+	rev32		v13.16b, v4.16b
+	rev32		v14.16b, v5.16b
+	rev32		v15.16b, v6.16b
+
+	SM4_CRYPT_BLK8_BE(v8, v9, v10, v11, v12, v13, v14, v15)
+
+	mov		RIV.16b, v7.16b
+
+	eor		v0.16b, v0.16b, v8.16b
+	eor		v1.16b, v1.16b, v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v5.16b, v5.16b, v13.16b
+	eor		v6.16b, v6.16b, v14.16b
+	eor		v7.16b, v7.16b, v15.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	cbz		w4, .Lcfb_dec_end
+	b		.Lcfb_dec_loop_8x
+
+.Lcfb_dec_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lcfb_dec_loop_1x
+
+	sub		w4, w4, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	rev32		v8.16b, RIV.16b
+	rev32		v9.16b, v0.16b
+	rev32		v10.16b, v1.16b
+	rev32		v11.16b, v2.16b
+
+	SM4_CRYPT_BLK4_BE(v8, v9, v10, v11)
+
+	mov		RIV.16b, v3.16b
+
+	eor		v0.16b, v0.16b, v8.16b
+	eor		v1.16b, v1.16b, v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	cbz		w4, .Lcfb_dec_end
+
+.Lcfb_dec_loop_1x:
+	sub		w4, w4, #1
+
+	ld1		{v0.16b}, [x2], #16
+
+	SM4_CRYPT_BLK(RIV)
+
+	eor		RIV.16b, RIV.16b, v0.16b
+	st1		{RIV.16b}, [x1], #16
+
+	mov		RIV.16b, v0.16b
+
+	cbnz		w4, .Lcfb_dec_loop_1x
+
+.Lcfb_dec_end:
+	/* store new IV */
+	st1		{RIV.16b}, [x3]
+
+	ret
+SYM_FUNC_END(sm4_ce_cfb_dec)
+
+.align 3
+SYM_FUNC_START(sm4_ce_ctr_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: ctr (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE(x0)
+
+	ldp		x7, x8, [x3]
+	rev		x7, x7
+	rev		x8, x8
+
+.Lctr_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lctr_4x
+
+#define inc_le128(vctr)					\
+		mov		vctr.d[1], x8;		\
+		mov		vctr.d[0], x7;		\
+		adds		x8, x8, #1;		\
+		rev64		vctr.16b, vctr.16b;	\
+		adc		x7, x7, xzr;
+
+	/* construct CTRs */
+	inc_le128(v0)			/* +0 */
+	inc_le128(v1)			/* +1 */
+	inc_le128(v2)			/* +2 */
+	inc_le128(v3)			/* +3 */
+	inc_le128(v4)			/* +4 */
+	inc_le128(v5)			/* +5 */
+	inc_le128(v6)			/* +6 */
+	inc_le128(v7)			/* +7 */
+
+	ld1		{v8.16b-v11.16b}, [x2], #64
+	ld1		{v12.16b-v15.16b}, [x2], #64
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	eor		v0.16b, v0.16b, v8.16b
+	eor		v1.16b, v1.16b, v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v5.16b, v5.16b, v13.16b
+	eor		v6.16b, v6.16b, v14.16b
+	eor		v7.16b, v7.16b, v15.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	cbz		w4, .Lctr_end
+	b		.Lctr_loop_8x
+
+.Lctr_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lctr_loop_1x
+
+	sub		w4, w4, #4
+
+	/* construct CTRs */
+	inc_le128(v0)			/* +0 */
+	inc_le128(v1)			/* +1 */
+	inc_le128(v2)			/* +2 */
+	inc_le128(v3)			/* +3 */
+
+	ld1		{v8.16b-v11.16b}, [x2], #64
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	eor		v0.16b, v0.16b, v8.16b
+	eor		v1.16b, v1.16b, v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	cbz		w4, .Lctr_end
+
+.Lctr_loop_1x:
+	sub		w4, w4, #1
+
+	/* construct CTRs */
+	inc_le128(v0)
+
+	ld1		{v8.16b}, [x2], #16
+
+	SM4_CRYPT_BLK(v0)
+
+	eor		v0.16b, v0.16b, v8.16b
+	st1		{v0.16b}, [x1], #16
+
+	cbnz		w4, .Lctr_loop_1x
+
+.Lctr_end:
+	/* store new CTR */
+	rev		x7, x7
+	rev		x8, x8
+	stp		x7, x8, [x3]
+
+	ret
+SYM_FUNC_END(sm4_ce_ctr_enc)
+
+
+#define tweak_next(vt, vin, RTMP)					\
+		sshr		RTMP.2d, vin.2d, #63;			\
+		and		RTMP.16b, RTMP.16b, RMASK.16b;		\
+		add		vt.2d, vin.2d, vin.2d;			\
+		ext		RTMP.16b, RTMP.16b, RTMP.16b, #8;	\
+		eor		vt.16b, vt.16b, RTMP.16b;
+
+.align 3
+SYM_FUNC_START(sm4_ce_xts_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: tweak (big endian, 128 bit)
+	 *   w4: nbytes
+	 *   x5: round key array for IV
+	 */
+	ld1		{v8.16b}, [x3]
+
+	cbz		x5, .Lxts_enc_nofirst
+
+	SM4_PREPARE(x5)
+
+	/* Generate first tweak */
+	SM4_CRYPT_BLK(v8)
+
+.Lxts_enc_nofirst:
+	SM4_PREPARE(x0)
+
+	ands		w5, w4, #15
+	lsr		w4, w4, #4
+	sub		w6, w4, #1
+	csel		w4, w4, w6, eq
+	uxtw		x5, w5
+
+	movi		RMASK.2s, #0x1
+	movi		RTMP0.2s, #0x87
+	uzp1		RMASK.4s, RMASK.4s, RTMP0.4s
+
+	cbz		w4, .Lxts_enc_cts
+
+.Lxts_enc_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lxts_enc_4x
+
+	tweak_next( v9,  v8, RTMP0)
+	tweak_next(v10,  v9, RTMP1)
+	tweak_next(v11, v10, RTMP2)
+	tweak_next(v12, v11, RTMP3)
+	tweak_next(v13, v12, RTMP0)
+	tweak_next(v14, v13, RTMP1)
+	tweak_next(v15, v14, RTMP2)
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+	ld1		{v4.16b-v7.16b}, [x2], #64
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v5.16b, v5.16b, v13.16b
+	eor		v6.16b, v6.16b, v14.16b
+	eor		v7.16b, v7.16b, v15.16b
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v5.16b, v5.16b, v13.16b
+	eor		v6.16b, v6.16b, v14.16b
+	eor		v7.16b, v7.16b, v15.16b
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	tweak_next(v8, v15, RTMP3)
+
+	cbz		w4, .Lxts_enc_cts
+	b		.Lxts_enc_loop_8x
+
+.Lxts_enc_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lxts_enc_loop_1x
+
+	sub		w4, w4, #4
+
+	tweak_next( v9,  v8, RTMP0)
+	tweak_next(v10,  v9, RTMP1)
+	tweak_next(v11, v10, RTMP2)
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	tweak_next(v8, v11, RTMP3)
+
+	cbz		w4, .Lxts_enc_cts
+
+.Lxts_enc_loop_1x:
+	sub		w4, w4, #1
+
+	ld1		{v0.16b}, [x2], #16
+	eor		v0.16b, v0.16b, v8.16b
+
+	SM4_CRYPT_BLK(v0)
+
+	eor		v0.16b, v0.16b, v8.16b
+	st1		{v0.16b}, [x1], #16
+
+	tweak_next(v8, v8, RTMP0)
+
+	cbnz		w4, .Lxts_enc_loop_1x
+
+.Lxts_enc_cts:
+	cbz		x5, .Lxts_enc_end
+
+	/* cipher text stealing */
+
+	tweak_next(v9, v8, RTMP0)
+	ld1		{v0.16b}, [x2]
+	eor		v0.16b, v0.16b, v8.16b
+	SM4_CRYPT_BLK(v0)
+	eor		v0.16b, v0.16b, v8.16b
+
+	/* load permute table */
+	adr_l		x6, .Lcts_permute_table
+	add		x7, x6, #32
+	add		x6, x6, x5
+	sub		x7, x7, x5
+	ld1		{v3.16b}, [x6]
+	ld1		{v4.16b}, [x7]
+
+	/* overlapping loads */
+	add		x2, x2, x5
+	ld1		{v1.16b}, [x2]
+
+	/* create Cn from En-1 */
+	tbl		v2.16b, {v0.16b}, v3.16b
+	/* padding Pn with En-1 at the end */
+	tbx		v0.16b, {v1.16b}, v4.16b
+
+	eor		v0.16b, v0.16b, v9.16b
+	SM4_CRYPT_BLK(v0)
+	eor		v0.16b, v0.16b, v9.16b
+
+
+	/* overlapping stores */
+	add		x5, x1, x5
+	st1		{v2.16b}, [x5]
+	st1		{v0.16b}, [x1]
+
+	b		.Lxts_enc_ret
+
+.Lxts_enc_end:
+	/* store new tweak */
+	st1		{v8.16b}, [x3]
+
+.Lxts_enc_ret:
+	ret
+SYM_FUNC_END(sm4_ce_xts_enc)
+
+.align 3
+SYM_FUNC_START(sm4_ce_xts_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: tweak (big endian, 128 bit)
+	 *   w4: nbytes
+	 *   x5: round key array for IV
+	 */
+	ld1		{v8.16b}, [x3]
+
+	cbz		x5, .Lxts_dec_nofirst
+
+	SM4_PREPARE(x5)
+
+	/* Generate first tweak */
+	SM4_CRYPT_BLK(v8)
+
+.Lxts_dec_nofirst:
+	SM4_PREPARE(x0)
+
+	ands		w5, w4, #15
+	lsr		w4, w4, #4
+	sub		w6, w4, #1
+	csel		w4, w4, w6, eq
+	uxtw		x5, w5
+
+	movi		RMASK.2s, #0x1
+	movi		RTMP0.2s, #0x87
+	uzp1		RMASK.4s, RMASK.4s, RTMP0.4s
+
+	cbz		w4, .Lxts_dec_cts
+
+.Lxts_dec_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lxts_dec_4x
+
+	tweak_next( v9,  v8, RTMP0)
+	tweak_next(v10,  v9, RTMP1)
+	tweak_next(v11, v10, RTMP2)
+	tweak_next(v12, v11, RTMP3)
+	tweak_next(v13, v12, RTMP0)
+	tweak_next(v14, v13, RTMP1)
+	tweak_next(v15, v14, RTMP2)
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+	ld1		{v4.16b-v7.16b}, [x2], #64
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v5.16b, v5.16b, v13.16b
+	eor		v6.16b, v6.16b, v14.16b
+	eor		v7.16b, v7.16b, v15.16b
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	eor		v4.16b, v4.16b, v12.16b
+	eor		v5.16b, v5.16b, v13.16b
+	eor		v6.16b, v6.16b, v14.16b
+	eor		v7.16b, v7.16b, v15.16b
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	tweak_next(v8, v15, RTMP3)
+
+	cbz		w4, .Lxts_dec_cts
+	b		.Lxts_dec_loop_8x
+
+.Lxts_dec_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lxts_dec_loop_1x
+
+	sub		w4, w4, #4
+
+	tweak_next( v9,  v8, RTMP0)
+	tweak_next(v10,  v9, RTMP1)
+	tweak_next(v11, v10, RTMP2)
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	eor		v0.16b, v0.16b,  v8.16b
+	eor		v1.16b, v1.16b,  v9.16b
+	eor		v2.16b, v2.16b, v10.16b
+	eor		v3.16b, v3.16b, v11.16b
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	tweak_next(v8, v11, RTMP3)
+
+	cbz		w4, .Lxts_dec_cts
+
+.Lxts_dec_loop_1x:
+	sub		w4, w4, #1
+
+	ld1		{v0.16b}, [x2], #16
+	eor		v0.16b, v0.16b, v8.16b
+
+	SM4_CRYPT_BLK(v0)
+
+	eor		v0.16b, v0.16b, v8.16b
+	st1		{v0.16b}, [x1], #16
+
+	tweak_next(v8, v8, RTMP0)
+
+	cbnz		w4, .Lxts_dec_loop_1x
+
+.Lxts_dec_cts:
+	cbz		x5, .Lxts_dec_end
+
+	/* cipher text stealing */
+
+	tweak_next(v9, v8, RTMP0)
+	ld1		{v0.16b}, [x2]
+	eor		v0.16b, v0.16b, v9.16b
+	SM4_CRYPT_BLK(v0)
+	eor		v0.16b, v0.16b, v9.16b
+
+	/* load permute table */
+	adr_l		x6, .Lcts_permute_table
+	add		x7, x6, #32
+	add		x6, x6, x5
+	sub		x7, x7, x5
+	ld1		{v3.16b}, [x6]
+	ld1		{v4.16b}, [x7]
+
+	/* overlapping loads */
+	add		x2, x2, x5
+	ld1		{v1.16b}, [x2]
+
+	/* create Cn from En-1 */
+	tbl		v2.16b, {v0.16b}, v3.16b
+	/* padding Pn with En-1 at the end */
+	tbx		v0.16b, {v1.16b}, v4.16b
+
+	eor		v0.16b, v0.16b, v8.16b
+	SM4_CRYPT_BLK(v0)
+	eor		v0.16b, v0.16b, v8.16b
+
+
+	/* overlapping stores */
+	add		x5, x1, x5
+	st1		{v2.16b}, [x5]
+	st1		{v0.16b}, [x1]
+
+	b		.Lxts_dec_ret
+
+.Lxts_dec_end:
+	/* store new tweak */
+	st1		{v8.16b}, [x3]
+
+.Lxts_dec_ret:
+	ret
+SYM_FUNC_END(sm4_ce_xts_dec)
+
+.align 3
+SYM_FUNC_START(sm4_ce_mac_update)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: digest
+	 *   x2: src
+	 *   w3: nblocks
+	 *   w4: enc_before
+	 *   w5: enc_after
+	 */
+	SM4_PREPARE(x0)
+
+	ld1		{RMAC.16b}, [x1]
+
+	cbz		w4, .Lmac_update
+
+	SM4_CRYPT_BLK(RMAC)
+
+.Lmac_update:
+	cbz		w3, .Lmac_ret
+
+	sub		w6, w3, #1
+	cmp		w5, wzr
+	csel		w3, w3, w6, ne
+
+	cbz		w3, .Lmac_end
+
+.Lmac_loop_4x:
+	cmp		w3, #4
+	blt		.Lmac_loop_1x
+
+	sub		w3, w3, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	eor		RMAC.16b, RMAC.16b, v0.16b
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v1.16b
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v2.16b
+	SM4_CRYPT_BLK(RMAC)
+	eor		RMAC.16b, RMAC.16b, v3.16b
+	SM4_CRYPT_BLK(RMAC)
+
+	cbz		w3, .Lmac_end
+	b		.Lmac_loop_4x
+
+.Lmac_loop_1x:
+	sub		w3, w3, #1
+
+	ld1		{v0.16b}, [x2], #16
+
+	eor		RMAC.16b, RMAC.16b, v0.16b
+	SM4_CRYPT_BLK(RMAC)
+
+	cbnz		w3, .Lmac_loop_1x
+
+
+.Lmac_end:
+	cbnz		w5, .Lmac_ret
+
+	ld1		{v0.16b}, [x2], #16
+	eor		RMAC.16b, RMAC.16b, v0.16b
+
+.Lmac_ret:
+	st1		{RMAC.16b}, [x1]
+	ret
+SYM_FUNC_END(sm4_ce_mac_update)
+
+
+	.section	".rodata", "a"
+	.align 4
+.Lbswap128_mask:
+	.byte		0x0c, 0x0d, 0x0e, 0x0f, 0x08, 0x09, 0x0a, 0x0b
+	.byte		0x04, 0x05, 0x06, 0x07, 0x00, 0x01, 0x02, 0x03
+
+.Lcts_permute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe,  0xf
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
diff --git a/arch/arm64/crypto/sm4-ce-gcm-core.S b/arch/arm64/crypto/sm4-ce-gcm-core.S
new file mode 100644
index 000000000..347f25d75
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-gcm-core.S
@@ -0,0 +1,742 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4-GCM AEAD Algorithm using ARMv8 Crypto Extensions
+ * as specified in rfc8998
+ * https://datatracker.ietf.org/doc/html/rfc8998
+ *
+ * Copyright (C) 2016 Jussi Kivilinna <jussi.kivilinna@iki.fi>
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+#include "sm4-ce-asm.h"
+
+.arch	armv8-a+crypto
+
+.irp b, 0, 1, 2, 3, 24, 25, 26, 27, 28, 29, 30, 31
+	.set .Lv\b\().4s, \b
+.endr
+
+.macro sm4e, vd, vn
+	.inst 0xcec08400 | (.L\vn << 5) | .L\vd
+.endm
+
+/* Register macros */
+
+/* Used for both encryption and decryption */
+#define	RHASH	v21
+#define	RRCONST	v22
+#define RZERO	v23
+
+/* Helper macros. */
+
+/*
+ * input: m0, m1
+ * output: r0:r1 (low 128-bits in r0, high in r1)
+ */
+#define PMUL_128x128(r0, r1, m0, m1, T0, T1)			\
+		ext		T0.16b, m1.16b, m1.16b, #8;	\
+		pmull		r0.1q, m0.1d, m1.1d;		\
+		pmull		T1.1q, m0.1d, T0.1d;		\
+		pmull2		T0.1q, m0.2d, T0.2d;		\
+		pmull2		r1.1q, m0.2d, m1.2d;		\
+		eor		T0.16b, T0.16b, T1.16b;		\
+		ext		T1.16b, RZERO.16b, T0.16b, #8;	\
+		ext		T0.16b, T0.16b, RZERO.16b, #8;	\
+		eor		r0.16b, r0.16b, T1.16b;		\
+		eor		r1.16b, r1.16b, T0.16b;
+
+#define PMUL_128x128_4x(r0, r1, m0, m1, T0, T1,			\
+			r2, r3, m2, m3, T2, T3,			\
+			r4, r5, m4, m5, T4, T5,			\
+			r6, r7, m6, m7, T6, T7)			\
+		ext		T0.16b, m1.16b, m1.16b, #8;	\
+		ext		T2.16b, m3.16b, m3.16b, #8;	\
+		ext		T4.16b, m5.16b, m5.16b, #8;	\
+		ext		T6.16b, m7.16b, m7.16b, #8;	\
+		pmull		r0.1q, m0.1d, m1.1d;		\
+		pmull		r2.1q, m2.1d, m3.1d;		\
+		pmull		r4.1q, m4.1d, m5.1d;		\
+		pmull		r6.1q, m6.1d, m7.1d;		\
+		pmull		T1.1q, m0.1d, T0.1d;		\
+		pmull		T3.1q, m2.1d, T2.1d;		\
+		pmull		T5.1q, m4.1d, T4.1d;		\
+		pmull		T7.1q, m6.1d, T6.1d;		\
+		pmull2		T0.1q, m0.2d, T0.2d;		\
+		pmull2		T2.1q, m2.2d, T2.2d;		\
+		pmull2		T4.1q, m4.2d, T4.2d;		\
+		pmull2		T6.1q, m6.2d, T6.2d;		\
+		pmull2		r1.1q, m0.2d, m1.2d;		\
+		pmull2		r3.1q, m2.2d, m3.2d;		\
+		pmull2		r5.1q, m4.2d, m5.2d;		\
+		pmull2		r7.1q, m6.2d, m7.2d;		\
+		eor		T0.16b, T0.16b, T1.16b;		\
+		eor		T2.16b, T2.16b, T3.16b;		\
+		eor		T4.16b, T4.16b, T5.16b;		\
+		eor		T6.16b, T6.16b, T7.16b;		\
+		ext		T1.16b, RZERO.16b, T0.16b, #8;	\
+		ext		T3.16b, RZERO.16b, T2.16b, #8;	\
+		ext		T5.16b, RZERO.16b, T4.16b, #8;	\
+		ext		T7.16b, RZERO.16b, T6.16b, #8;	\
+		ext		T0.16b, T0.16b, RZERO.16b, #8;	\
+		ext		T2.16b, T2.16b, RZERO.16b, #8;	\
+		ext		T4.16b, T4.16b, RZERO.16b, #8;	\
+		ext		T6.16b, T6.16b, RZERO.16b, #8;	\
+		eor		r0.16b, r0.16b, T1.16b;		\
+		eor		r2.16b, r2.16b, T3.16b; 	\
+		eor		r4.16b, r4.16b, T5.16b; 	\
+		eor		r6.16b, r6.16b, T7.16b; 	\
+		eor		r1.16b, r1.16b, T0.16b; 	\
+		eor		r3.16b, r3.16b, T2.16b; 	\
+		eor		r5.16b, r5.16b, T4.16b; 	\
+		eor		r7.16b, r7.16b, T6.16b;
+
+/*
+ * input: r0:r1 (low 128-bits in r0, high in r1)
+ * output: a
+ */
+#define REDUCTION(a, r0, r1, rconst, T0, T1)			\
+		pmull2		T0.1q, r1.2d, rconst.2d;	\
+		ext		T1.16b, T0.16b, RZERO.16b, #8;	\
+		ext		T0.16b, RZERO.16b, T0.16b, #8;	\
+		eor		r1.16b, r1.16b, T1.16b;		\
+		eor		r0.16b, r0.16b, T0.16b;		\
+		pmull		T0.1q, r1.1d, rconst.1d;	\
+		eor		a.16b, r0.16b, T0.16b;
+
+#define SM4_CRYPT_PMUL_128x128_BLK(b0, r0, r1, m0, m1, T0, T1)	\
+	rev32			b0.16b, b0.16b;			\
+		ext		T0.16b, m1.16b, m1.16b, #8;	\
+	sm4e			b0.4s, v24.4s;			\
+		pmull		r0.1q, m0.1d, m1.1d;		\
+	sm4e			b0.4s, v25.4s;			\
+		pmull		T1.1q, m0.1d, T0.1d;		\
+	sm4e			b0.4s, v26.4s;			\
+		pmull2		T0.1q, m0.2d, T0.2d;		\
+	sm4e			b0.4s, v27.4s;			\
+		pmull2		r1.1q, m0.2d, m1.2d;		\
+	sm4e			b0.4s, v28.4s;			\
+		eor		T0.16b, T0.16b, T1.16b;		\
+	sm4e			b0.4s, v29.4s;			\
+		ext		T1.16b, RZERO.16b, T0.16b, #8;	\
+	sm4e			b0.4s, v30.4s;			\
+		ext		T0.16b, T0.16b, RZERO.16b, #8;	\
+	sm4e			b0.4s, v31.4s;			\
+		eor		r0.16b, r0.16b, T1.16b;		\
+	rev64			b0.4s, b0.4s;			\
+		eor		r1.16b, r1.16b, T0.16b;		\
+	ext			b0.16b, b0.16b, b0.16b, #8;	\
+	rev32			b0.16b, b0.16b;
+
+#define SM4_CRYPT_PMUL_128x128_BLK3(b0, b1, b2,			\
+				    r0, r1, m0, m1, T0, T1,	\
+				    r2, r3, m2, m3, T2, T3,	\
+				    r4, r5, m4, m5, T4, T5)	\
+	rev32			b0.16b, b0.16b;			\
+	rev32			b1.16b, b1.16b;			\
+	rev32			b2.16b, b2.16b;			\
+		ext		T0.16b, m1.16b, m1.16b, #8;	\
+		ext		T2.16b, m3.16b, m3.16b, #8;	\
+		ext		T4.16b, m5.16b, m5.16b, #8;	\
+	sm4e			b0.4s, v24.4s;			\
+	sm4e			b1.4s, v24.4s;			\
+	sm4e			b2.4s, v24.4s;			\
+		pmull		r0.1q, m0.1d, m1.1d;		\
+		pmull		r2.1q, m2.1d, m3.1d;		\
+		pmull		r4.1q, m4.1d, m5.1d;		\
+	sm4e			b0.4s, v25.4s;			\
+	sm4e			b1.4s, v25.4s;			\
+	sm4e			b2.4s, v25.4s;			\
+		pmull		T1.1q, m0.1d, T0.1d;		\
+		pmull		T3.1q, m2.1d, T2.1d;		\
+		pmull		T5.1q, m4.1d, T4.1d;		\
+	sm4e			b0.4s, v26.4s;			\
+	sm4e			b1.4s, v26.4s;			\
+	sm4e			b2.4s, v26.4s;			\
+		pmull2		T0.1q, m0.2d, T0.2d;		\
+		pmull2		T2.1q, m2.2d, T2.2d;		\
+		pmull2		T4.1q, m4.2d, T4.2d;		\
+	sm4e			b0.4s, v27.4s;			\
+	sm4e			b1.4s, v27.4s;			\
+	sm4e			b2.4s, v27.4s;			\
+		pmull2		r1.1q, m0.2d, m1.2d;		\
+		pmull2		r3.1q, m2.2d, m3.2d;		\
+		pmull2		r5.1q, m4.2d, m5.2d;		\
+	sm4e			b0.4s, v28.4s;			\
+	sm4e			b1.4s, v28.4s;			\
+	sm4e			b2.4s, v28.4s;			\
+		eor		T0.16b, T0.16b, T1.16b;		\
+		eor		T2.16b, T2.16b, T3.16b;		\
+		eor		T4.16b, T4.16b, T5.16b;		\
+	sm4e			b0.4s, v29.4s;			\
+	sm4e			b1.4s, v29.4s;			\
+	sm4e			b2.4s, v29.4s;			\
+		ext		T1.16b, RZERO.16b, T0.16b, #8;	\
+		ext		T3.16b, RZERO.16b, T2.16b, #8;	\
+		ext		T5.16b, RZERO.16b, T4.16b, #8;	\
+	sm4e			b0.4s, v30.4s;			\
+	sm4e			b1.4s, v30.4s;			\
+	sm4e			b2.4s, v30.4s;			\
+		ext		T0.16b, T0.16b, RZERO.16b, #8;	\
+		ext		T2.16b, T2.16b, RZERO.16b, #8;	\
+		ext		T4.16b, T4.16b, RZERO.16b, #8;	\
+	sm4e			b0.4s, v31.4s;			\
+	sm4e			b1.4s, v31.4s;			\
+	sm4e			b2.4s, v31.4s;			\
+		eor		r0.16b, r0.16b, T1.16b;		\
+		eor		r2.16b, r2.16b, T3.16b;		\
+		eor		r4.16b, r4.16b, T5.16b;		\
+	rev64			b0.4s, b0.4s;			\
+	rev64			b1.4s, b1.4s;			\
+	rev64			b2.4s, b2.4s;			\
+		eor		r1.16b, r1.16b, T0.16b;		\
+		eor		r3.16b, r3.16b, T2.16b;		\
+		eor		r5.16b, r5.16b, T4.16b;		\
+	ext			b0.16b, b0.16b, b0.16b, #8;	\
+	ext			b1.16b, b1.16b, b1.16b, #8;	\
+	ext			b2.16b, b2.16b, b2.16b, #8;	\
+		eor		r0.16b, r0.16b, r2.16b;		\
+		eor		r1.16b, r1.16b, r3.16b;		\
+	rev32			b0.16b, b0.16b;			\
+	rev32			b1.16b, b1.16b;			\
+	rev32			b2.16b, b2.16b;			\
+		eor		r0.16b, r0.16b, r4.16b;		\
+		eor		r1.16b, r1.16b, r5.16b;
+
+#define inc32_le128(vctr)					\
+		mov		vctr.d[1], x9;			\
+		add		w6, w9, #1;			\
+		mov		vctr.d[0], x8;			\
+		bfi		x9, x6, #0, #32;		\
+		rev64		vctr.16b, vctr.16b;
+
+#define GTAG_HASH_LENGTHS(vctr0, vlen)					\
+		ld1		{vlen.16b}, [x7];			\
+		/* construct CTR0 */					\
+		/* the lower 32-bits of initial IV is always be32(1) */	\
+		mov		x6, #0x1;				\
+		bfi		x9, x6, #0, #32;			\
+		mov		vctr0.d[0], x8;				\
+		mov		vctr0.d[1], x9;				\
+		rbit		vlen.16b, vlen.16b;			\
+		rev64		vctr0.16b, vctr0.16b;			\
+		/* authtag = GCTR(CTR0, GHASH) */			\
+		eor		RHASH.16b, RHASH.16b, vlen.16b;		\
+		SM4_CRYPT_PMUL_128x128_BLK(vctr0, RR0, RR1, RHASH, RH1,	\
+					   RTMP0, RTMP1);		\
+		REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP2, RTMP3);	\
+		rbit		RHASH.16b, RHASH.16b;			\
+		eor		RHASH.16b, RHASH.16b, vctr0.16b;
+
+
+/* Register macros for encrypt and ghash */
+
+/* can be the same as input v0-v3 */
+#define	RR1	v0
+#define	RR3	v1
+#define	RR5	v2
+#define	RR7	v3
+
+#define	RR0	v4
+#define	RR2	v5
+#define	RR4	v6
+#define	RR6	v7
+
+#define RTMP0	v8
+#define RTMP1	v9
+#define RTMP2	v10
+#define RTMP3	v11
+#define RTMP4	v12
+#define RTMP5	v13
+#define RTMP6	v14
+#define RTMP7	v15
+
+#define	RH1	v16
+#define	RH2	v17
+#define	RH3	v18
+#define	RH4	v19
+
+.align 3
+SYM_FUNC_START(sm4_ce_pmull_ghash_setup)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: ghash table
+	 */
+	SM4_PREPARE(x0)
+
+	adr_l		x2, .Lghash_rconst
+	ld1r		{RRCONST.2d}, [x2]
+
+	eor		RZERO.16b, RZERO.16b, RZERO.16b
+
+	/* H = E(K, 0^128) */
+	rev32		v0.16b, RZERO.16b
+	SM4_CRYPT_BLK_BE(v0)
+
+	/* H ^ 1 */
+	rbit		RH1.16b, v0.16b
+
+	/* H ^ 2 */
+	PMUL_128x128(RR0, RR1, RH1, RH1, RTMP0, RTMP1)
+	REDUCTION(RH2, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+	/* H ^ 3 */
+	PMUL_128x128(RR0, RR1, RH2, RH1, RTMP0, RTMP1)
+	REDUCTION(RH3, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+	/* H ^ 4 */
+	PMUL_128x128(RR0, RR1, RH2, RH2, RTMP0, RTMP1)
+	REDUCTION(RH4, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+	st1		{RH1.16b-RH4.16b}, [x1]
+
+	ret
+SYM_FUNC_END(sm4_ce_pmull_ghash_setup)
+
+.align 3
+SYM_FUNC_START(pmull_ghash_update)
+	/* input:
+	 *   x0: ghash table
+	 *   x1: ghash result
+	 *   x2: src
+	 *   w3: nblocks
+	 */
+	ld1		{RH1.16b-RH4.16b}, [x0]
+
+	ld1		{RHASH.16b}, [x1]
+	rbit		RHASH.16b, RHASH.16b
+
+	adr_l		x4, .Lghash_rconst
+	ld1r		{RRCONST.2d}, [x4]
+
+	eor		RZERO.16b, RZERO.16b, RZERO.16b
+
+.Lghash_loop_4x:
+	cmp		w3, #4
+	blt		.Lghash_loop_1x
+
+	sub		w3, w3, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	rbit		v0.16b, v0.16b
+	rbit		v1.16b, v1.16b
+	rbit		v2.16b, v2.16b
+	rbit		v3.16b, v3.16b
+
+	/*
+	 * (in0 ^ HASH) * H^4 => rr0:rr1
+	 * (in1)        * H^3 => rr2:rr3
+	 * (in2)        * H^2 => rr4:rr5
+	 * (in3)        * H^1 => rr6:rr7
+	 */
+	eor		RHASH.16b, RHASH.16b, v0.16b
+
+	PMUL_128x128_4x(RR0, RR1, RHASH, RH4, RTMP0, RTMP1,
+			RR2, RR3, v1, RH3, RTMP2, RTMP3,
+			RR4, RR5, v2, RH2, RTMP4, RTMP5,
+			RR6, RR7, v3, RH1, RTMP6, RTMP7)
+
+	eor		RR0.16b, RR0.16b, RR2.16b
+	eor		RR1.16b, RR1.16b, RR3.16b
+	eor		RR0.16b, RR0.16b, RR4.16b
+	eor		RR1.16b, RR1.16b, RR5.16b
+	eor		RR0.16b, RR0.16b, RR6.16b
+	eor		RR1.16b, RR1.16b, RR7.16b
+
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP0, RTMP1)
+
+	cbz		w3, .Lghash_end
+	b		.Lghash_loop_4x
+
+.Lghash_loop_1x:
+	sub		w3, w3, #1
+
+	ld1		{v0.16b}, [x2], #16
+	rbit		v0.16b, v0.16b
+	eor		RHASH.16b, RHASH.16b, v0.16b
+
+	PMUL_128x128(RR0, RR1, RHASH, RH1, RTMP0, RTMP1)
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+	cbnz		w3, .Lghash_loop_1x
+
+.Lghash_end:
+	rbit		RHASH.16b, RHASH.16b
+	st1		{RHASH.2d}, [x1]
+
+	ret
+SYM_FUNC_END(pmull_ghash_update)
+
+.align 3
+SYM_TYPED_FUNC_START(sm4_ce_pmull_gcm_enc)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: ctr (big endian, 128 bit)
+	 *   w4: nbytes
+	 *   x5: ghash result
+	 *   x6: ghash table
+	 *   x7: lengths (only for last block)
+	 */
+	SM4_PREPARE(x0)
+
+	ldp		x8, x9, [x3]
+	rev		x8, x8
+	rev		x9, x9
+
+	ld1		{RH1.16b-RH4.16b}, [x6]
+
+	ld1		{RHASH.16b}, [x5]
+	rbit		RHASH.16b, RHASH.16b
+
+	adr_l		x6, .Lghash_rconst
+	ld1r		{RRCONST.2d}, [x6]
+
+	eor		RZERO.16b, RZERO.16b, RZERO.16b
+
+	cbz		w4, .Lgcm_enc_hash_len
+
+.Lgcm_enc_loop_4x:
+	cmp		w4, #(4 * 16)
+	blt		.Lgcm_enc_loop_1x
+
+	sub		w4, w4, #(4 * 16)
+
+	/* construct CTRs */
+	inc32_le128(v0)			/* +0 */
+	inc32_le128(v1)			/* +1 */
+	inc32_le128(v2)			/* +2 */
+	inc32_le128(v3)			/* +3 */
+
+	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	eor		v0.16b, v0.16b, RTMP0.16b
+	eor		v1.16b, v1.16b, RTMP1.16b
+	eor		v2.16b, v2.16b, RTMP2.16b
+	eor		v3.16b, v3.16b, RTMP3.16b
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	/* ghash update */
+
+	rbit		v0.16b, v0.16b
+	rbit		v1.16b, v1.16b
+	rbit		v2.16b, v2.16b
+	rbit		v3.16b, v3.16b
+
+	/*
+	 * (in0 ^ HASH) * H^4 => rr0:rr1
+	 * (in1)        * H^3 => rr2:rr3
+	 * (in2)        * H^2 => rr4:rr5
+	 * (in3)        * H^1 => rr6:rr7
+	 */
+	eor		RHASH.16b, RHASH.16b, v0.16b
+
+	PMUL_128x128_4x(RR0, RR1, RHASH, RH4, RTMP0, RTMP1,
+			RR2, RR3, v1, RH3, RTMP2, RTMP3,
+			RR4, RR5, v2, RH2, RTMP4, RTMP5,
+			RR6, RR7, v3, RH1, RTMP6, RTMP7)
+
+	eor		RR0.16b, RR0.16b, RR2.16b
+	eor		RR1.16b, RR1.16b, RR3.16b
+	eor		RR0.16b, RR0.16b, RR4.16b
+	eor		RR1.16b, RR1.16b, RR5.16b
+	eor		RR0.16b, RR0.16b, RR6.16b
+	eor		RR1.16b, RR1.16b, RR7.16b
+
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP0, RTMP1)
+
+	cbz		w4, .Lgcm_enc_hash_len
+	b		.Lgcm_enc_loop_4x
+
+.Lgcm_enc_loop_1x:
+	cmp		w4, #16
+	blt		.Lgcm_enc_tail
+
+	sub		w4, w4, #16
+
+	/* construct CTRs */
+	inc32_le128(v0)
+
+	ld1		{RTMP0.16b}, [x2], #16
+
+	SM4_CRYPT_BLK(v0)
+
+	eor		v0.16b, v0.16b, RTMP0.16b
+	st1		{v0.16b}, [x1], #16
+
+	/* ghash update */
+	rbit		v0.16b, v0.16b
+	eor		RHASH.16b, RHASH.16b, v0.16b
+	PMUL_128x128(RR0, RR1, RHASH, RH1, RTMP0, RTMP1)
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+	cbz		w4, .Lgcm_enc_hash_len
+	b		.Lgcm_enc_loop_1x
+
+.Lgcm_enc_tail:
+	/* construct CTRs */
+	inc32_le128(v0)
+	SM4_CRYPT_BLK(v0)
+
+	/* load permute table */
+	adr_l		x0, .Lcts_permute_table
+	add		x0, x0, #32
+	sub		x0, x0, w4, uxtw
+	ld1		{v3.16b}, [x0]
+
+.Lgcm_enc_tail_loop:
+	/* do encrypt */
+	ldrb		w0, [x2], #1	/* get 1 byte from input */
+	umov		w6, v0.b[0]	/* get top crypted byte */
+	eor		w6, w6, w0	/* w6 = CTR ^ input */
+	strb		w6, [x1], #1	/* store out byte */
+
+	/* shift right out one byte */
+	ext		v0.16b, v0.16b, v0.16b, #1
+	/* the last ciphertext is placed in high bytes */
+	ins		v0.b[15], w6
+
+	subs		w4, w4, #1
+	bne		.Lgcm_enc_tail_loop
+
+	/* padding last block with zeros */
+	tbl		v0.16b, {v0.16b}, v3.16b
+
+	/* ghash update */
+	rbit		v0.16b, v0.16b
+	eor		RHASH.16b, RHASH.16b, v0.16b
+	PMUL_128x128(RR0, RR1, RHASH, RH1, RTMP0, RTMP1)
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+.Lgcm_enc_hash_len:
+	cbz		x7, .Lgcm_enc_end
+
+	GTAG_HASH_LENGTHS(v1, v3)
+
+	b		.Lgcm_enc_ret
+
+.Lgcm_enc_end:
+	/* store new CTR */
+	rev		x8, x8
+	rev		x9, x9
+	stp		x8, x9, [x3]
+
+	rbit		RHASH.16b, RHASH.16b
+
+.Lgcm_enc_ret:
+	/* store new MAC */
+	st1		{RHASH.2d}, [x5]
+
+	ret
+SYM_FUNC_END(sm4_ce_pmull_gcm_enc)
+
+#undef	RR1
+#undef	RR3
+#undef	RR5
+#undef	RR7
+#undef	RR0
+#undef	RR2
+#undef	RR4
+#undef	RR6
+#undef RTMP0
+#undef RTMP1
+#undef RTMP2
+#undef RTMP3
+#undef RTMP4
+#undef RTMP5
+#undef RTMP6
+#undef RTMP7
+#undef	RH1
+#undef	RH2
+#undef	RH3
+#undef	RH4
+
+
+/* Register macros for decrypt */
+
+/* v0-v2 for building CTRs, v3-v5 for saving inputs */
+
+#define	RR1	v6
+#define	RR3	v7
+#define	RR5	v8
+
+#define	RR0	v9
+#define	RR2	v10
+#define	RR4	v11
+
+#define RTMP0	v12
+#define RTMP1	v13
+#define RTMP2	v14
+#define RTMP3	v15
+#define RTMP4	v16
+#define RTMP5	v17
+
+#define	RH1	v18
+#define	RH2	v19
+#define	RH3	v20
+
+.align 3
+SYM_TYPED_FUNC_START(sm4_ce_pmull_gcm_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: ctr (big endian, 128 bit)
+	 *   w4: nbytes
+	 *   x5: ghash result
+	 *   x6: ghash table
+	 *   x7: lengths (only for last block)
+	 */
+	SM4_PREPARE(x0)
+
+	ldp		x8, x9, [x3]
+	rev		x8, x8
+	rev		x9, x9
+
+	ld1		{RH1.16b-RH3.16b}, [x6]
+
+	ld1		{RHASH.16b}, [x5]
+	rbit		RHASH.16b, RHASH.16b
+
+	adr_l		x6, .Lghash_rconst
+	ld1r		{RRCONST.2d}, [x6]
+
+	eor		RZERO.16b, RZERO.16b, RZERO.16b
+
+	cbz		w4, .Lgcm_dec_hash_len
+
+.Lgcm_dec_loop_3x:
+	cmp		w4, #(3 * 16)
+	blt		.Lgcm_dec_loop_1x
+
+	sub		w4, w4, #(3 * 16)
+
+	ld1		{v3.16b-v5.16b}, [x2], #(3 * 16)
+
+	/* construct CTRs */
+	inc32_le128(v0)			/* +0 */
+	rbit		v6.16b, v3.16b
+	inc32_le128(v1)			/* +1 */
+	rbit		v7.16b, v4.16b
+	inc32_le128(v2)			/* +2 */
+	rbit		v8.16b, v5.16b
+
+	eor		RHASH.16b, RHASH.16b, v6.16b
+
+	/* decrypt & ghash update */
+	SM4_CRYPT_PMUL_128x128_BLK3(v0, v1, v2,
+				    RR0, RR1, RHASH, RH3, RTMP0, RTMP1,
+				    RR2, RR3, v7, RH2, RTMP2, RTMP3,
+				    RR4, RR5, v8, RH1, RTMP4, RTMP5)
+
+	eor		v0.16b, v0.16b, v3.16b
+	eor		v1.16b, v1.16b, v4.16b
+	eor		v2.16b, v2.16b, v5.16b
+
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP0, RTMP1)
+
+	st1		{v0.16b-v2.16b}, [x1], #(3 * 16)
+
+	cbz		w4, .Lgcm_dec_hash_len
+	b		.Lgcm_dec_loop_3x
+
+.Lgcm_dec_loop_1x:
+	cmp		w4, #16
+	blt		.Lgcm_dec_tail
+
+	sub		w4, w4, #16
+
+	ld1		{v3.16b}, [x2], #16
+
+	/* construct CTRs */
+	inc32_le128(v0)
+	rbit		v6.16b, v3.16b
+
+	eor		RHASH.16b, RHASH.16b, v6.16b
+
+	SM4_CRYPT_PMUL_128x128_BLK(v0, RR0, RR1, RHASH, RH1, RTMP0, RTMP1)
+
+	eor		v0.16b, v0.16b, v3.16b
+
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+	st1		{v0.16b}, [x1], #16
+
+	cbz		w4, .Lgcm_dec_hash_len
+	b		.Lgcm_dec_loop_1x
+
+.Lgcm_dec_tail:
+	/* construct CTRs */
+	inc32_le128(v0)
+	SM4_CRYPT_BLK(v0)
+
+	/* load permute table */
+	adr_l		x0, .Lcts_permute_table
+	add		x0, x0, #32
+	sub		x0, x0, w4, uxtw
+	ld1		{v3.16b}, [x0]
+
+.Lgcm_dec_tail_loop:
+	/* do decrypt */
+	ldrb		w0, [x2], #1	/* get 1 byte from input */
+	umov		w6, v0.b[0]	/* get top crypted byte */
+	eor		w6, w6, w0	/* w6 = CTR ^ input */
+	strb		w6, [x1], #1	/* store out byte */
+
+	/* shift right out one byte */
+	ext		v0.16b, v0.16b, v0.16b, #1
+	/* the last ciphertext is placed in high bytes */
+	ins		v0.b[15], w0
+
+	subs		w4, w4, #1
+	bne		.Lgcm_dec_tail_loop
+
+	/* padding last block with zeros */
+	tbl		v0.16b, {v0.16b}, v3.16b
+
+	/* ghash update */
+	rbit		v0.16b, v0.16b
+	eor		RHASH.16b, RHASH.16b, v0.16b
+	PMUL_128x128(RR0, RR1, RHASH, RH1, RTMP0, RTMP1)
+	REDUCTION(RHASH, RR0, RR1, RRCONST, RTMP2, RTMP3)
+
+.Lgcm_dec_hash_len:
+	cbz		x7, .Lgcm_dec_end
+
+	GTAG_HASH_LENGTHS(v1, v3)
+
+	b		.Lgcm_dec_ret
+
+.Lgcm_dec_end:
+	/* store new CTR */
+	rev		x8, x8
+	rev		x9, x9
+	stp		x8, x9, [x3]
+
+	rbit		RHASH.16b, RHASH.16b
+
+.Lgcm_dec_ret:
+	/* store new MAC */
+	st1		{RHASH.2d}, [x5]
+
+	ret
+SYM_FUNC_END(sm4_ce_pmull_gcm_dec)
+
+	.section	".rodata", "a"
+	.align 4
+.Lcts_permute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		 0x0,  0x1,  0x2,  0x3,  0x4,  0x5,  0x6,  0x7
+	.byte		 0x8,  0x9,  0xa,  0xb,  0xc,  0xd,  0xe,  0xf
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+
+.Lghash_rconst:
+	.quad		0x87
diff --git a/arch/arm64/crypto/sm4-ce-gcm-glue.c b/arch/arm64/crypto/sm4-ce-gcm-glue.c
new file mode 100644
index 000000000..73bfb6972
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-gcm-glue.c
@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4-GCM AEAD Algorithm using ARMv8 Crypto Extensions
+ * as specified in rfc8998
+ * https://datatracker.ietf.org/doc/html/rfc8998
+ *
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/cpufeature.h>
+#include <asm/neon.h>
+#include <crypto/b128ops.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/internal/aead.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/sm4.h>
+#include "sm4-ce.h"
+
+asmlinkage void sm4_ce_pmull_ghash_setup(const u32 *rkey_enc, u8 *ghash_table);
+asmlinkage void pmull_ghash_update(const u8 *ghash_table, u8 *ghash,
+				   const u8 *src, unsigned int nblocks);
+asmlinkage void sm4_ce_pmull_gcm_enc(const u32 *rkey_enc, u8 *dst,
+				     const u8 *src, u8 *iv,
+				     unsigned int nbytes, u8 *ghash,
+				     const u8 *ghash_table, const u8 *lengths);
+asmlinkage void sm4_ce_pmull_gcm_dec(const u32 *rkey_enc, u8 *dst,
+				     const u8 *src, u8 *iv,
+				     unsigned int nbytes, u8 *ghash,
+				     const u8 *ghash_table, const u8 *lengths);
+
+#define GHASH_BLOCK_SIZE	16
+#define GCM_IV_SIZE		12
+
+struct sm4_gcm_ctx {
+	struct sm4_ctx key;
+	u8 ghash_table[16 * 4];
+};
+
+
+static int gcm_setkey(struct crypto_aead *tfm, const u8 *key,
+		      unsigned int key_len)
+{
+	struct sm4_gcm_ctx *ctx = crypto_aead_ctx(tfm);
+
+	if (key_len != SM4_KEY_SIZE)
+		return -EINVAL;
+
+	kernel_neon_begin();
+
+	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+	sm4_ce_pmull_ghash_setup(ctx->key.rkey_enc, ctx->ghash_table);
+
+	kernel_neon_end();
+	return 0;
+}
+
+static int gcm_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
+{
+	switch (authsize) {
+	case 4:
+	case 8:
+	case 12 ... 16:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void gcm_calculate_auth_mac(struct aead_request *req, u8 ghash[])
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct sm4_gcm_ctx *ctx = crypto_aead_ctx(aead);
+	u8 __aligned(8) buffer[GHASH_BLOCK_SIZE];
+	u32 assoclen = req->assoclen;
+	struct scatter_walk walk;
+	unsigned int buflen = 0;
+
+	scatterwalk_start(&walk, req->src);
+
+	do {
+		u32 n = scatterwalk_clamp(&walk, assoclen);
+		u8 *p, *ptr;
+
+		if (!n) {
+			scatterwalk_start(&walk, sg_next(walk.sg));
+			n = scatterwalk_clamp(&walk, assoclen);
+		}
+
+		p = ptr = scatterwalk_map(&walk);
+		assoclen -= n;
+		scatterwalk_advance(&walk, n);
+
+		if (n + buflen < GHASH_BLOCK_SIZE) {
+			memcpy(&buffer[buflen], ptr, n);
+			buflen += n;
+		} else {
+			unsigned int nblocks;
+
+			if (buflen) {
+				unsigned int l = GHASH_BLOCK_SIZE - buflen;
+
+				memcpy(&buffer[buflen], ptr, l);
+				ptr += l;
+				n -= l;
+
+				pmull_ghash_update(ctx->ghash_table, ghash,
+						   buffer, 1);
+			}
+
+			nblocks = n / GHASH_BLOCK_SIZE;
+			if (nblocks) {
+				pmull_ghash_update(ctx->ghash_table, ghash,
+						   ptr, nblocks);
+				ptr += nblocks * GHASH_BLOCK_SIZE;
+			}
+
+			buflen = n % GHASH_BLOCK_SIZE;
+			if (buflen)
+				memcpy(&buffer[0], ptr, buflen);
+		}
+
+		scatterwalk_unmap(p);
+		scatterwalk_done(&walk, 0, assoclen);
+	} while (assoclen);
+
+	/* padding with '0' */
+	if (buflen) {
+		memset(&buffer[buflen], 0, GHASH_BLOCK_SIZE - buflen);
+		pmull_ghash_update(ctx->ghash_table, ghash, buffer, 1);
+	}
+}
+
+static int gcm_crypt(struct aead_request *req, struct skcipher_walk *walk,
+		     u8 ghash[], int err,
+		     void (*sm4_ce_pmull_gcm_crypt)(const u32 *rkey_enc,
+				u8 *dst, const u8 *src, u8 *iv,
+				unsigned int nbytes, u8 *ghash,
+				const u8 *ghash_table, const u8 *lengths))
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	struct sm4_gcm_ctx *ctx = crypto_aead_ctx(aead);
+	u8 __aligned(8) iv[SM4_BLOCK_SIZE];
+	be128 __aligned(8) lengths;
+
+	memset(ghash, 0, SM4_BLOCK_SIZE);
+
+	lengths.a = cpu_to_be64(req->assoclen * 8);
+	lengths.b = cpu_to_be64(walk->total * 8);
+
+	memcpy(iv, req->iv, GCM_IV_SIZE);
+	put_unaligned_be32(2, iv + GCM_IV_SIZE);
+
+	kernel_neon_begin();
+
+	if (req->assoclen)
+		gcm_calculate_auth_mac(req, ghash);
+
+	while (walk->nbytes) {
+		unsigned int tail = walk->nbytes % SM4_BLOCK_SIZE;
+		const u8 *src = walk->src.virt.addr;
+		u8 *dst = walk->dst.virt.addr;
+
+		if (walk->nbytes == walk->total) {
+			sm4_ce_pmull_gcm_crypt(ctx->key.rkey_enc, dst, src, iv,
+					       walk->nbytes, ghash,
+					       ctx->ghash_table,
+					       (const u8 *)&lengths);
+
+			kernel_neon_end();
+
+			return skcipher_walk_done(walk, 0);
+		}
+
+		sm4_ce_pmull_gcm_crypt(ctx->key.rkey_enc, dst, src, iv,
+				       walk->nbytes - tail, ghash,
+				       ctx->ghash_table, NULL);
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(walk, tail);
+
+		kernel_neon_begin();
+	}
+
+	sm4_ce_pmull_gcm_crypt(ctx->key.rkey_enc, NULL, NULL, iv,
+			       walk->nbytes, ghash, ctx->ghash_table,
+			       (const u8 *)&lengths);
+
+	kernel_neon_end();
+
+	return err;
+}
+
+static int gcm_encrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	u8 __aligned(8) ghash[SM4_BLOCK_SIZE];
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_aead_encrypt(&walk, req, false);
+	err = gcm_crypt(req, &walk, ghash, err, sm4_ce_pmull_gcm_enc);
+	if (err)
+		return err;
+
+	/* copy authtag to end of dst */
+	scatterwalk_map_and_copy(ghash, req->dst, req->assoclen + req->cryptlen,
+				 crypto_aead_authsize(aead), 1);
+
+	return 0;
+}
+
+static int gcm_decrypt(struct aead_request *req)
+{
+	struct crypto_aead *aead = crypto_aead_reqtfm(req);
+	unsigned int authsize = crypto_aead_authsize(aead);
+	u8 __aligned(8) ghash[SM4_BLOCK_SIZE];
+	u8 authtag[SM4_BLOCK_SIZE];
+	struct skcipher_walk walk;
+	int err;
+
+	err = skcipher_walk_aead_decrypt(&walk, req, false);
+	err = gcm_crypt(req, &walk, ghash, err, sm4_ce_pmull_gcm_dec);
+	if (err)
+		return err;
+
+	/* compare calculated auth tag with the stored one */
+	scatterwalk_map_and_copy(authtag, req->src,
+				 req->assoclen + req->cryptlen - authsize,
+				 authsize, 0);
+
+	if (crypto_memneq(authtag, ghash, authsize))
+		return -EBADMSG;
+
+	return 0;
+}
+
+static struct aead_alg sm4_gcm_alg = {
+	.base = {
+		.cra_name		= "gcm(sm4)",
+		.cra_driver_name	= "gcm-sm4-ce",
+		.cra_priority		= 400,
+		.cra_blocksize		= 1,
+		.cra_ctxsize		= sizeof(struct sm4_gcm_ctx),
+		.cra_module		= THIS_MODULE,
+	},
+	.ivsize		= GCM_IV_SIZE,
+	.chunksize	= SM4_BLOCK_SIZE,
+	.maxauthsize	= SM4_BLOCK_SIZE,
+	.setkey		= gcm_setkey,
+	.setauthsize	= gcm_setauthsize,
+	.encrypt	= gcm_encrypt,
+	.decrypt	= gcm_decrypt,
+};
+
+static int __init sm4_ce_gcm_init(void)
+{
+	if (!cpu_have_named_feature(PMULL))
+		return -ENODEV;
+
+	return crypto_register_aead(&sm4_gcm_alg);
+}
+
+static void __exit sm4_ce_gcm_exit(void)
+{
+	crypto_unregister_aead(&sm4_gcm_alg);
+}
+
+static const struct cpu_feature __maybe_unused sm4_ce_gcm_cpu_feature[] = {
+	{ cpu_feature(PMULL) },
+	{}
+};
+MODULE_DEVICE_TABLE(cpu, sm4_ce_gcm_cpu_feature);
+
+module_cpu_feature_match(SM4, sm4_ce_gcm_init);
+module_exit(sm4_ce_gcm_exit);
+
+MODULE_DESCRIPTION("Synchronous SM4 in GCM mode using ARMv8 Crypto Extensions");
+MODULE_ALIAS_CRYPTO("gcm(sm4)");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/crypto/sm4-ce-glue.c b/arch/arm64/crypto/sm4-ce-glue.c
new file mode 100644
index 000000000..0a2d32ed3
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce-glue.c
@@ -0,0 +1,885 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4 Cipher Algorithm, using ARMv8 Crypto Extensions
+ * as specified in
+ * https://tools.ietf.org/id/draft-ribose-cfrg-sm4-10.html
+ *
+ * Copyright (C) 2022, Alibaba Group.
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/cpufeature.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/b128ops.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/internal/hash.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/xts.h>
+#include <crypto/sm4.h>
+
+#define BYTES2BLKS(nbytes)	((nbytes) >> 4)
+
+asmlinkage void sm4_ce_expand_key(const u8 *key, u32 *rkey_enc, u32 *rkey_dec,
+				  const u32 *fk, const u32 *ck);
+asmlinkage void sm4_ce_crypt_block(const u32 *rkey, u8 *dst, const u8 *src);
+asmlinkage void sm4_ce_crypt(const u32 *rkey, u8 *dst, const u8 *src,
+			     unsigned int nblks);
+asmlinkage void sm4_ce_cbc_enc(const u32 *rkey, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nblocks);
+asmlinkage void sm4_ce_cbc_dec(const u32 *rkey, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nblocks);
+asmlinkage void sm4_ce_cbc_cts_enc(const u32 *rkey, u8 *dst, const u8 *src,
+				   u8 *iv, unsigned int nbytes);
+asmlinkage void sm4_ce_cbc_cts_dec(const u32 *rkey, u8 *dst, const u8 *src,
+				   u8 *iv, unsigned int nbytes);
+asmlinkage void sm4_ce_cfb_enc(const u32 *rkey, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nblks);
+asmlinkage void sm4_ce_cfb_dec(const u32 *rkey, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nblks);
+asmlinkage void sm4_ce_ctr_enc(const u32 *rkey, u8 *dst, const u8 *src,
+			       u8 *iv, unsigned int nblks);
+asmlinkage void sm4_ce_xts_enc(const u32 *rkey1, u8 *dst, const u8 *src,
+			       u8 *tweak, unsigned int nbytes,
+			       const u32 *rkey2_enc);
+asmlinkage void sm4_ce_xts_dec(const u32 *rkey1, u8 *dst, const u8 *src,
+			       u8 *tweak, unsigned int nbytes,
+			       const u32 *rkey2_enc);
+asmlinkage void sm4_ce_mac_update(const u32 *rkey_enc, u8 *digest,
+				  const u8 *src, unsigned int nblocks,
+				  bool enc_before, bool enc_after);
+
+EXPORT_SYMBOL(sm4_ce_expand_key);
+EXPORT_SYMBOL(sm4_ce_crypt_block);
+EXPORT_SYMBOL(sm4_ce_cbc_enc);
+EXPORT_SYMBOL(sm4_ce_cfb_enc);
+
+struct sm4_xts_ctx {
+	struct sm4_ctx key1;
+	struct sm4_ctx key2;
+};
+
+struct sm4_mac_tfm_ctx {
+	struct sm4_ctx key;
+	u8 __aligned(8) consts[];
+};
+
+struct sm4_mac_desc_ctx {
+	unsigned int len;
+	u8 digest[SM4_BLOCK_SIZE];
+};
+
+static int sm4_setkey(struct crypto_skcipher *tfm, const u8 *key,
+		      unsigned int key_len)
+{
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	if (key_len != SM4_KEY_SIZE)
+		return -EINVAL;
+
+	kernel_neon_begin();
+	sm4_ce_expand_key(key, ctx->rkey_enc, ctx->rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+	kernel_neon_end();
+	return 0;
+}
+
+static int sm4_xts_setkey(struct crypto_skcipher *tfm, const u8 *key,
+			  unsigned int key_len)
+{
+	struct sm4_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int ret;
+
+	if (key_len != SM4_KEY_SIZE * 2)
+		return -EINVAL;
+
+	ret = xts_verify_key(tfm, key, key_len);
+	if (ret)
+		return ret;
+
+	kernel_neon_begin();
+	sm4_ce_expand_key(key, ctx->key1.rkey_enc,
+			  ctx->key1.rkey_dec, crypto_sm4_fk, crypto_sm4_ck);
+	sm4_ce_expand_key(&key[SM4_KEY_SIZE], ctx->key2.rkey_enc,
+			  ctx->key2.rkey_dec, crypto_sm4_fk, crypto_sm4_ck);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm4_ecb_do_crypt(struct skcipher_request *req, const u32 *rkey)
+{
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblks;
+
+		kernel_neon_begin();
+
+		nblks = BYTES2BLKS(nbytes);
+		if (nblks) {
+			sm4_ce_crypt(rkey, dst, src, nblks);
+			nbytes -= nblks * SM4_BLOCK_SIZE;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_ecb_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_ecb_do_crypt(req, ctx->rkey_enc);
+}
+
+static int sm4_ecb_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_ecb_do_crypt(req, ctx->rkey_dec);
+}
+
+static int sm4_cbc_crypt(struct skcipher_request *req,
+			 struct sm4_ctx *ctx, bool encrypt)
+{
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+	if (err)
+		return err;
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblocks;
+
+		nblocks = nbytes / SM4_BLOCK_SIZE;
+		if (nblocks) {
+			kernel_neon_begin();
+
+			if (encrypt)
+				sm4_ce_cbc_enc(ctx->rkey_enc, dst, src,
+					       walk.iv, nblocks);
+			else
+				sm4_ce_cbc_dec(ctx->rkey_dec, dst, src,
+					       walk.iv, nblocks);
+
+			kernel_neon_end();
+		}
+
+		err = skcipher_walk_done(&walk, nbytes % SM4_BLOCK_SIZE);
+	}
+
+	return err;
+}
+
+static int sm4_cbc_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_cbc_crypt(req, ctx, true);
+}
+
+static int sm4_cbc_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_cbc_crypt(req, ctx, false);
+}
+
+static int sm4_cbc_cts_crypt(struct skcipher_request *req, bool encrypt)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct scatterlist *src = req->src;
+	struct scatterlist *dst = req->dst;
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct skcipher_walk walk;
+	int cbc_blocks;
+	int err;
+
+	if (req->cryptlen < SM4_BLOCK_SIZE)
+		return -EINVAL;
+
+	if (req->cryptlen == SM4_BLOCK_SIZE)
+		return sm4_cbc_crypt(req, ctx, encrypt);
+
+	skcipher_request_set_tfm(&subreq, tfm);
+	skcipher_request_set_callback(&subreq, skcipher_request_flags(req),
+				      NULL, NULL);
+
+	/* handle the CBC cryption part */
+	cbc_blocks = DIV_ROUND_UP(req->cryptlen, SM4_BLOCK_SIZE) - 2;
+	if (cbc_blocks) {
+		skcipher_request_set_crypt(&subreq, src, dst,
+					   cbc_blocks * SM4_BLOCK_SIZE,
+					   req->iv);
+
+		err = sm4_cbc_crypt(&subreq, ctx, encrypt);
+		if (err)
+			return err;
+
+		dst = src = scatterwalk_ffwd(sg_src, src, subreq.cryptlen);
+		if (req->dst != req->src)
+			dst = scatterwalk_ffwd(sg_dst, req->dst,
+					       subreq.cryptlen);
+	}
+
+	/* handle ciphertext stealing */
+	skcipher_request_set_crypt(&subreq, src, dst,
+				   req->cryptlen - cbc_blocks * SM4_BLOCK_SIZE,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, &subreq, false);
+	if (err)
+		return err;
+
+	kernel_neon_begin();
+
+	if (encrypt)
+		sm4_ce_cbc_cts_enc(ctx->rkey_enc, walk.dst.virt.addr,
+				   walk.src.virt.addr, walk.iv, walk.nbytes);
+	else
+		sm4_ce_cbc_cts_dec(ctx->rkey_dec, walk.dst.virt.addr,
+				   walk.src.virt.addr, walk.iv, walk.nbytes);
+
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static int sm4_cbc_cts_encrypt(struct skcipher_request *req)
+{
+	return sm4_cbc_cts_crypt(req, true);
+}
+
+static int sm4_cbc_cts_decrypt(struct skcipher_request *req)
+{
+	return sm4_cbc_cts_crypt(req, false);
+}
+
+static int sm4_cfb_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblks;
+
+		kernel_neon_begin();
+
+		nblks = BYTES2BLKS(nbytes);
+		if (nblks) {
+			sm4_ce_cfb_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
+			dst += nblks * SM4_BLOCK_SIZE;
+			src += nblks * SM4_BLOCK_SIZE;
+			nbytes -= nblks * SM4_BLOCK_SIZE;
+		}
+
+		/* tail */
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			u8 keystream[SM4_BLOCK_SIZE];
+
+			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+			crypto_xor_cpy(dst, src, keystream, nbytes);
+			nbytes = 0;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_cfb_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblks;
+
+		kernel_neon_begin();
+
+		nblks = BYTES2BLKS(nbytes);
+		if (nblks) {
+			sm4_ce_cfb_dec(ctx->rkey_enc, dst, src, walk.iv, nblks);
+			dst += nblks * SM4_BLOCK_SIZE;
+			src += nblks * SM4_BLOCK_SIZE;
+			nbytes -= nblks * SM4_BLOCK_SIZE;
+		}
+
+		/* tail */
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			u8 keystream[SM4_BLOCK_SIZE];
+
+			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+			crypto_xor_cpy(dst, src, keystream, nbytes);
+			nbytes = 0;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_ctr_crypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblks;
+
+		kernel_neon_begin();
+
+		nblks = BYTES2BLKS(nbytes);
+		if (nblks) {
+			sm4_ce_ctr_enc(ctx->rkey_enc, dst, src, walk.iv, nblks);
+			dst += nblks * SM4_BLOCK_SIZE;
+			src += nblks * SM4_BLOCK_SIZE;
+			nbytes -= nblks * SM4_BLOCK_SIZE;
+		}
+
+		/* tail */
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			u8 keystream[SM4_BLOCK_SIZE];
+
+			sm4_ce_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+			crypto_inc(walk.iv, SM4_BLOCK_SIZE);
+			crypto_xor_cpy(dst, src, keystream, nbytes);
+			nbytes = 0;
+		}
+
+		kernel_neon_end();
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_xts_crypt(struct skcipher_request *req, bool encrypt)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	int tail = req->cryptlen % SM4_BLOCK_SIZE;
+	const u32 *rkey2_enc = ctx->key2.rkey_enc;
+	struct scatterlist sg_src[2], sg_dst[2];
+	struct skcipher_request subreq;
+	struct scatterlist *src, *dst;
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	if (req->cryptlen < SM4_BLOCK_SIZE)
+		return -EINVAL;
+
+	err = skcipher_walk_virt(&walk, req, false);
+	if (err)
+		return err;
+
+	if (unlikely(tail > 0 && walk.nbytes < walk.total)) {
+		int nblocks = DIV_ROUND_UP(req->cryptlen, SM4_BLOCK_SIZE) - 2;
+
+		skcipher_walk_abort(&walk);
+
+		skcipher_request_set_tfm(&subreq, tfm);
+		skcipher_request_set_callback(&subreq,
+					      skcipher_request_flags(req),
+					      NULL, NULL);
+		skcipher_request_set_crypt(&subreq, req->src, req->dst,
+					   nblocks * SM4_BLOCK_SIZE, req->iv);
+
+		err = skcipher_walk_virt(&walk, &subreq, false);
+		if (err)
+			return err;
+	} else {
+		tail = 0;
+	}
+
+	while ((nbytes = walk.nbytes) >= SM4_BLOCK_SIZE) {
+		if (nbytes < walk.total)
+			nbytes &= ~(SM4_BLOCK_SIZE - 1);
+
+		kernel_neon_begin();
+
+		if (encrypt)
+			sm4_ce_xts_enc(ctx->key1.rkey_enc, walk.dst.virt.addr,
+				       walk.src.virt.addr, walk.iv, nbytes,
+				       rkey2_enc);
+		else
+			sm4_ce_xts_dec(ctx->key1.rkey_dec, walk.dst.virt.addr,
+				       walk.src.virt.addr, walk.iv, nbytes,
+				       rkey2_enc);
+
+		kernel_neon_end();
+
+		rkey2_enc = NULL;
+
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
+		if (err)
+			return err;
+	}
+
+	if (likely(tail == 0))
+		return 0;
+
+	/* handle ciphertext stealing */
+
+	dst = src = scatterwalk_ffwd(sg_src, req->src, subreq.cryptlen);
+	if (req->dst != req->src)
+		dst = scatterwalk_ffwd(sg_dst, req->dst, subreq.cryptlen);
+
+	skcipher_request_set_crypt(&subreq, src, dst, SM4_BLOCK_SIZE + tail,
+				   req->iv);
+
+	err = skcipher_walk_virt(&walk, &subreq, false);
+	if (err)
+		return err;
+
+	kernel_neon_begin();
+
+	if (encrypt)
+		sm4_ce_xts_enc(ctx->key1.rkey_enc, walk.dst.virt.addr,
+			       walk.src.virt.addr, walk.iv, walk.nbytes,
+			       rkey2_enc);
+	else
+		sm4_ce_xts_dec(ctx->key1.rkey_dec, walk.dst.virt.addr,
+			       walk.src.virt.addr, walk.iv, walk.nbytes,
+			       rkey2_enc);
+
+	kernel_neon_end();
+
+	return skcipher_walk_done(&walk, 0);
+}
+
+static int sm4_xts_encrypt(struct skcipher_request *req)
+{
+	return sm4_xts_crypt(req, true);
+}
+
+static int sm4_xts_decrypt(struct skcipher_request *req)
+{
+	return sm4_xts_crypt(req, false);
+}
+
+static struct skcipher_alg sm4_algs[] = {
+	{
+		.base = {
+			.cra_name		= "ecb(sm4)",
+			.cra_driver_name	= "ecb-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_ecb_encrypt,
+		.decrypt	= sm4_ecb_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "cbc(sm4)",
+			.cra_driver_name	= "cbc-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_cbc_encrypt,
+		.decrypt	= sm4_cbc_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "cfb(sm4)",
+			.cra_driver_name	= "cfb-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= 1,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.chunksize	= SM4_BLOCK_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_cfb_encrypt,
+		.decrypt	= sm4_cfb_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "ctr(sm4)",
+			.cra_driver_name	= "ctr-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= 1,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.chunksize	= SM4_BLOCK_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_ctr_crypt,
+		.decrypt	= sm4_ctr_crypt,
+	}, {
+		.base = {
+			.cra_name		= "cts(cbc(sm4))",
+			.cra_driver_name	= "cts-cbc-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.walksize	= SM4_BLOCK_SIZE * 2,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_cbc_cts_encrypt,
+		.decrypt	= sm4_cbc_cts_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "xts(sm4)",
+			.cra_driver_name	= "xts-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_xts_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE * 2,
+		.max_keysize	= SM4_KEY_SIZE * 2,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.walksize	= SM4_BLOCK_SIZE * 2,
+		.setkey		= sm4_xts_setkey,
+		.encrypt	= sm4_xts_encrypt,
+		.decrypt	= sm4_xts_decrypt,
+	}
+};
+
+static int sm4_cbcmac_setkey(struct crypto_shash *tfm, const u8 *key,
+			     unsigned int key_len)
+{
+	struct sm4_mac_tfm_ctx *ctx = crypto_shash_ctx(tfm);
+
+	if (key_len != SM4_KEY_SIZE)
+		return -EINVAL;
+
+	kernel_neon_begin();
+	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm4_cmac_setkey(struct crypto_shash *tfm, const u8 *key,
+			   unsigned int key_len)
+{
+	struct sm4_mac_tfm_ctx *ctx = crypto_shash_ctx(tfm);
+	be128 *consts = (be128 *)ctx->consts;
+	u64 a, b;
+
+	if (key_len != SM4_KEY_SIZE)
+		return -EINVAL;
+
+	memset(consts, 0, SM4_BLOCK_SIZE);
+
+	kernel_neon_begin();
+
+	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+
+	/* encrypt the zero block */
+	sm4_ce_crypt_block(ctx->key.rkey_enc, (u8 *)consts, (const u8 *)consts);
+
+	kernel_neon_end();
+
+	/* gf(2^128) multiply zero-ciphertext with u and u^2 */
+	a = be64_to_cpu(consts[0].a);
+	b = be64_to_cpu(consts[0].b);
+	consts[0].a = cpu_to_be64((a << 1) | (b >> 63));
+	consts[0].b = cpu_to_be64((b << 1) ^ ((a >> 63) ? 0x87 : 0));
+
+	a = be64_to_cpu(consts[0].a);
+	b = be64_to_cpu(consts[0].b);
+	consts[1].a = cpu_to_be64((a << 1) | (b >> 63));
+	consts[1].b = cpu_to_be64((b << 1) ^ ((a >> 63) ? 0x87 : 0));
+
+	return 0;
+}
+
+static int sm4_xcbc_setkey(struct crypto_shash *tfm, const u8 *key,
+			   unsigned int key_len)
+{
+	struct sm4_mac_tfm_ctx *ctx = crypto_shash_ctx(tfm);
+	u8 __aligned(8) key2[SM4_BLOCK_SIZE];
+	static u8 const ks[3][SM4_BLOCK_SIZE] = {
+		{ [0 ... SM4_BLOCK_SIZE - 1] = 0x1},
+		{ [0 ... SM4_BLOCK_SIZE - 1] = 0x2},
+		{ [0 ... SM4_BLOCK_SIZE - 1] = 0x3},
+	};
+
+	if (key_len != SM4_KEY_SIZE)
+		return -EINVAL;
+
+	kernel_neon_begin();
+
+	sm4_ce_expand_key(key, ctx->key.rkey_enc, ctx->key.rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+
+	sm4_ce_crypt_block(ctx->key.rkey_enc, key2, ks[0]);
+	sm4_ce_crypt(ctx->key.rkey_enc, ctx->consts, ks[1], 2);
+
+	sm4_ce_expand_key(key2, ctx->key.rkey_enc, ctx->key.rkey_dec,
+			  crypto_sm4_fk, crypto_sm4_ck);
+
+	kernel_neon_end();
+
+	return 0;
+}
+
+static int sm4_mac_init(struct shash_desc *desc)
+{
+	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	memset(ctx->digest, 0, SM4_BLOCK_SIZE);
+	ctx->len = 0;
+
+	return 0;
+}
+
+static int sm4_mac_update(struct shash_desc *desc, const u8 *p,
+			  unsigned int len)
+{
+	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int l, nblocks;
+
+	if (len == 0)
+		return 0;
+
+	if (ctx->len || ctx->len + len < SM4_BLOCK_SIZE) {
+		l = min(len, SM4_BLOCK_SIZE - ctx->len);
+
+		crypto_xor(ctx->digest + ctx->len, p, l);
+		ctx->len += l;
+		len -= l;
+		p += l;
+	}
+
+	if (len && (ctx->len % SM4_BLOCK_SIZE) == 0) {
+		kernel_neon_begin();
+
+		if (len < SM4_BLOCK_SIZE && ctx->len == SM4_BLOCK_SIZE) {
+			sm4_ce_crypt_block(tctx->key.rkey_enc,
+					   ctx->digest, ctx->digest);
+			ctx->len = 0;
+		} else {
+			nblocks = len / SM4_BLOCK_SIZE;
+			len %= SM4_BLOCK_SIZE;
+
+			sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, p,
+					  nblocks, (ctx->len == SM4_BLOCK_SIZE),
+					  (len != 0));
+
+			p += nblocks * SM4_BLOCK_SIZE;
+
+			if (len == 0)
+				ctx->len = SM4_BLOCK_SIZE;
+		}
+
+		kernel_neon_end();
+
+		if (len) {
+			crypto_xor(ctx->digest, p, len);
+			ctx->len = len;
+		}
+	}
+
+	return 0;
+}
+
+static int sm4_cmac_final(struct shash_desc *desc, u8 *out)
+{
+	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
+	const u8 *consts = tctx->consts;
+
+	if (ctx->len != SM4_BLOCK_SIZE) {
+		ctx->digest[ctx->len] ^= 0x80;
+		consts += SM4_BLOCK_SIZE;
+	}
+
+	kernel_neon_begin();
+	sm4_ce_mac_update(tctx->key.rkey_enc, ctx->digest, consts, 1,
+			  false, true);
+	kernel_neon_end();
+
+	memcpy(out, ctx->digest, SM4_BLOCK_SIZE);
+
+	return 0;
+}
+
+static int sm4_cbcmac_final(struct shash_desc *desc, u8 *out)
+{
+	struct sm4_mac_tfm_ctx *tctx = crypto_shash_ctx(desc->tfm);
+	struct sm4_mac_desc_ctx *ctx = shash_desc_ctx(desc);
+
+	if (ctx->len) {
+		kernel_neon_begin();
+		sm4_ce_crypt_block(tctx->key.rkey_enc, ctx->digest,
+				   ctx->digest);
+		kernel_neon_end();
+	}
+
+	memcpy(out, ctx->digest, SM4_BLOCK_SIZE);
+
+	return 0;
+}
+
+static struct shash_alg sm4_mac_algs[] = {
+	{
+		.base = {
+			.cra_name		= "cmac(sm4)",
+			.cra_driver_name	= "cmac-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx)
+							+ SM4_BLOCK_SIZE * 2,
+			.cra_module		= THIS_MODULE,
+		},
+		.digestsize	= SM4_BLOCK_SIZE,
+		.init		= sm4_mac_init,
+		.update		= sm4_mac_update,
+		.final		= sm4_cmac_final,
+		.setkey		= sm4_cmac_setkey,
+		.descsize	= sizeof(struct sm4_mac_desc_ctx),
+	}, {
+		.base = {
+			.cra_name		= "xcbc(sm4)",
+			.cra_driver_name	= "xcbc-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx)
+							+ SM4_BLOCK_SIZE * 2,
+			.cra_module		= THIS_MODULE,
+		},
+		.digestsize	= SM4_BLOCK_SIZE,
+		.init		= sm4_mac_init,
+		.update		= sm4_mac_update,
+		.final		= sm4_cmac_final,
+		.setkey		= sm4_xcbc_setkey,
+		.descsize	= sizeof(struct sm4_mac_desc_ctx),
+	}, {
+		.base = {
+			.cra_name		= "cbcmac(sm4)",
+			.cra_driver_name	= "cbcmac-sm4-ce",
+			.cra_priority		= 400,
+			.cra_blocksize		= 1,
+			.cra_ctxsize		= sizeof(struct sm4_mac_tfm_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.digestsize	= SM4_BLOCK_SIZE,
+		.init		= sm4_mac_init,
+		.update		= sm4_mac_update,
+		.final		= sm4_cbcmac_final,
+		.setkey		= sm4_cbcmac_setkey,
+		.descsize	= sizeof(struct sm4_mac_desc_ctx),
+	}
+};
+
+static int __init sm4_init(void)
+{
+	int err;
+
+	err = crypto_register_skciphers(sm4_algs, ARRAY_SIZE(sm4_algs));
+	if (err)
+		return err;
+
+	err = crypto_register_shashes(sm4_mac_algs, ARRAY_SIZE(sm4_mac_algs));
+	if (err)
+		goto out_err;
+
+	return 0;
+
+out_err:
+	crypto_unregister_skciphers(sm4_algs, ARRAY_SIZE(sm4_algs));
+	return err;
+}
+
+static void __exit sm4_exit(void)
+{
+	crypto_unregister_shashes(sm4_mac_algs, ARRAY_SIZE(sm4_mac_algs));
+	crypto_unregister_skciphers(sm4_algs, ARRAY_SIZE(sm4_algs));
+}
+
+module_cpu_feature_match(SM4, sm4_init);
+module_exit(sm4_exit);
+
+MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR/XTS using ARMv8 Crypto Extensions");
+MODULE_ALIAS_CRYPTO("sm4-ce");
+MODULE_ALIAS_CRYPTO("sm4");
+MODULE_ALIAS_CRYPTO("ecb(sm4)");
+MODULE_ALIAS_CRYPTO("cbc(sm4)");
+MODULE_ALIAS_CRYPTO("cfb(sm4)");
+MODULE_ALIAS_CRYPTO("ctr(sm4)");
+MODULE_ALIAS_CRYPTO("cts(cbc(sm4))");
+MODULE_ALIAS_CRYPTO("xts(sm4)");
+MODULE_ALIAS_CRYPTO("cmac(sm4)");
+MODULE_ALIAS_CRYPTO("xcbc(sm4)");
+MODULE_ALIAS_CRYPTO("cbcmac(sm4)");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/crypto/sm4-ce.h b/arch/arm64/crypto/sm4-ce.h
new file mode 100644
index 000000000..109c21b37
--- /dev/null
+++ b/arch/arm64/crypto/sm4-ce.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4 common functions for Crypto Extensions
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+void sm4_ce_expand_key(const u8 *key, u32 *rkey_enc, u32 *rkey_dec,
+		       const u32 *fk, const u32 *ck);
+
+void sm4_ce_crypt_block(const u32 *rkey, u8 *dst, const u8 *src);
+
+void sm4_ce_cbc_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
+		    u8 *iv, unsigned int nblocks);
+
+void sm4_ce_cfb_enc(const u32 *rkey_enc, u8 *dst, const u8 *src,
+		    u8 *iv, unsigned int nblocks);
diff --git a/arch/arm64/crypto/sm4-neon-core.S b/arch/arm64/crypto/sm4-neon-core.S
new file mode 100644
index 000000000..f295b4b7d
--- /dev/null
+++ b/arch/arm64/crypto/sm4-neon-core.S
@@ -0,0 +1,679 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4 Cipher Algorithm for ARMv8 NEON
+ * as specified in
+ * https://tools.ietf.org/id/draft-ribose-cfrg-sm4-10.html
+ *
+ * Copyright (C) 2022, Alibaba Group.
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/* Register macros */
+
+#define RTMP0	v8
+#define RTMP1	v9
+#define RTMP2	v10
+#define RTMP3	v11
+
+#define RTMP4	v12
+#define RTMP5	v13
+#define RTMP6	v14
+#define RTMP7	v15
+
+#define RX0	v12
+#define RX1	v13
+#define RKEY	v14
+#define RIV	v15
+
+/* Helper macros. */
+
+#define SM4_PREPARE()                                           \
+	adr_l		x5, crypto_sm4_sbox;                    \
+	ld1		{v16.16b-v19.16b}, [x5], #64;           \
+	ld1		{v20.16b-v23.16b}, [x5], #64;           \
+	ld1		{v24.16b-v27.16b}, [x5], #64;           \
+	ld1		{v28.16b-v31.16b}, [x5];
+
+#define transpose_4x4(s0, s1, s2, s3)                           \
+	zip1		RTMP0.4s, s0.4s, s1.4s;                 \
+	zip1		RTMP1.4s, s2.4s, s3.4s;                 \
+	zip2		RTMP2.4s, s0.4s, s1.4s;                 \
+	zip2		RTMP3.4s, s2.4s, s3.4s;                 \
+	zip1		s0.2d, RTMP0.2d, RTMP1.2d;              \
+	zip2		s1.2d, RTMP0.2d, RTMP1.2d;              \
+	zip1		s2.2d, RTMP2.2d, RTMP3.2d;              \
+	zip2		s3.2d, RTMP2.2d, RTMP3.2d;
+
+#define transpose_4x4_2x(s0, s1, s2, s3, s4, s5, s6, s7)        \
+	zip1		RTMP0.4s, s0.4s, s1.4s;                 \
+	zip1		RTMP1.4s, s2.4s, s3.4s;                 \
+	zip2		RTMP2.4s, s0.4s, s1.4s;                 \
+	zip2		RTMP3.4s, s2.4s, s3.4s;                 \
+	zip1		RTMP4.4s, s4.4s, s5.4s;                 \
+	zip1		RTMP5.4s, s6.4s, s7.4s;                 \
+	zip2		RTMP6.4s, s4.4s, s5.4s;                 \
+	zip2		RTMP7.4s, s6.4s, s7.4s;                 \
+	zip1		s0.2d, RTMP0.2d, RTMP1.2d;              \
+	zip2		s1.2d, RTMP0.2d, RTMP1.2d;              \
+	zip1		s2.2d, RTMP2.2d, RTMP3.2d;              \
+	zip2		s3.2d, RTMP2.2d, RTMP3.2d;              \
+	zip1		s4.2d, RTMP4.2d, RTMP5.2d;              \
+	zip2		s5.2d, RTMP4.2d, RTMP5.2d;              \
+	zip1		s6.2d, RTMP6.2d, RTMP7.2d;              \
+	zip2		s7.2d, RTMP6.2d, RTMP7.2d;
+
+#define rotate_clockwise_4x4(s0, s1, s2, s3)                    \
+	zip1		RTMP0.4s, s1.4s, s0.4s;                 \
+	zip2		RTMP1.4s, s1.4s, s0.4s;                 \
+	zip1		RTMP2.4s, s3.4s, s2.4s;                 \
+	zip2		RTMP3.4s, s3.4s, s2.4s;                 \
+	zip1		s0.2d, RTMP2.2d, RTMP0.2d;              \
+	zip2		s1.2d, RTMP2.2d, RTMP0.2d;              \
+	zip1		s2.2d, RTMP3.2d, RTMP1.2d;              \
+	zip2		s3.2d, RTMP3.2d, RTMP1.2d;
+
+#define rotate_clockwise_4x4_2x(s0, s1, s2, s3, s4, s5, s6, s7) \
+	zip1		RTMP0.4s, s1.4s, s0.4s;                 \
+	zip1		RTMP2.4s, s3.4s, s2.4s;                 \
+	zip2		RTMP1.4s, s1.4s, s0.4s;                 \
+	zip2		RTMP3.4s, s3.4s, s2.4s;                 \
+	zip1		RTMP4.4s, s5.4s, s4.4s;                 \
+	zip1		RTMP6.4s, s7.4s, s6.4s;                 \
+	zip2		RTMP5.4s, s5.4s, s4.4s;                 \
+	zip2		RTMP7.4s, s7.4s, s6.4s;                 \
+	zip1		s0.2d, RTMP2.2d, RTMP0.2d;              \
+	zip2		s1.2d, RTMP2.2d, RTMP0.2d;              \
+	zip1		s2.2d, RTMP3.2d, RTMP1.2d;              \
+	zip2		s3.2d, RTMP3.2d, RTMP1.2d;              \
+	zip1		s4.2d, RTMP6.2d, RTMP4.2d;              \
+	zip2		s5.2d, RTMP6.2d, RTMP4.2d;              \
+	zip1		s6.2d, RTMP7.2d, RTMP5.2d;              \
+	zip2		s7.2d, RTMP7.2d, RTMP5.2d;
+
+#define ROUND4(round, s0, s1, s2, s3)                           \
+	dup		RX0.4s, RKEY.s[round];                  \
+	/* rk ^ s1 ^ s2 ^ s3 */                                 \
+	eor		RTMP1.16b, s2.16b, s3.16b;              \
+	eor		RX0.16b, RX0.16b, s1.16b;               \
+	eor		RX0.16b, RX0.16b, RTMP1.16b;            \
+                                                                \
+	/* sbox, non-linear part */                             \
+	movi		RTMP3.16b, #64;  /* sizeof(sbox) / 4 */ \
+	tbl		RTMP0.16b, {v16.16b-v19.16b}, RX0.16b;  \
+	sub		RX0.16b, RX0.16b, RTMP3.16b;            \
+	tbx		RTMP0.16b, {v20.16b-v23.16b}, RX0.16b;  \
+	sub		RX0.16b, RX0.16b, RTMP3.16b;            \
+	tbx		RTMP0.16b, {v24.16b-v27.16b}, RX0.16b;  \
+	sub		RX0.16b, RX0.16b, RTMP3.16b;            \
+	tbx		RTMP0.16b, {v28.16b-v31.16b}, RX0.16b;  \
+                                                                \
+	/* linear part */                                       \
+	shl		RTMP1.4s, RTMP0.4s, #8;                 \
+	shl		RTMP2.4s, RTMP0.4s, #16;                \
+	shl		RTMP3.4s, RTMP0.4s, #24;                \
+	sri		RTMP1.4s, RTMP0.4s, #(32-8);            \
+	sri		RTMP2.4s, RTMP0.4s, #(32-16);           \
+	sri		RTMP3.4s, RTMP0.4s, #(32-24);           \
+	/* RTMP1 = x ^ rol32(x, 8) ^ rol32(x, 16) */            \
+	eor		RTMP1.16b, RTMP1.16b, RTMP0.16b;        \
+	eor		RTMP1.16b, RTMP1.16b, RTMP2.16b;        \
+	/* RTMP3 = x ^ rol32(x, 24) ^ rol32(RTMP1, 2) */        \
+	eor		RTMP3.16b, RTMP3.16b, RTMP0.16b;        \
+	shl		RTMP2.4s, RTMP1.4s, 2;                  \
+	sri		RTMP2.4s, RTMP1.4s, #(32-2);            \
+	eor		RTMP3.16b, RTMP3.16b, RTMP2.16b;        \
+	/* s0 ^= RTMP3 */                                       \
+	eor		s0.16b, s0.16b, RTMP3.16b;
+
+#define SM4_CRYPT_BLK4_BE(b0, b1, b2, b3)                       \
+	mov		x6, 8;                                  \
+4:                                                              \
+	ld1		{RKEY.4s}, [x0], #16;                   \
+	subs		x6, x6, #1;                             \
+                                                                \
+	ROUND4(0, b0, b1, b2, b3);                              \
+	ROUND4(1, b1, b2, b3, b0);                              \
+	ROUND4(2, b2, b3, b0, b1);                              \
+	ROUND4(3, b3, b0, b1, b2);                              \
+                                                                \
+	bne		4b;                                     \
+                                                                \
+	rev32		b0.16b, b0.16b;                         \
+	rev32		b1.16b, b1.16b;                         \
+	rev32		b2.16b, b2.16b;                         \
+	rev32		b3.16b, b3.16b;                         \
+                                                                \
+	rotate_clockwise_4x4(b0, b1, b2, b3);                   \
+                                                                \
+	/* repoint to rkey */                                   \
+	sub		x0, x0, #128;
+
+#define SM4_CRYPT_BLK4(b0, b1, b2, b3)                          \
+	rev32		b0.16b, b0.16b;                         \
+	rev32		b1.16b, b1.16b;                         \
+	rev32		b2.16b, b2.16b;                         \
+	rev32		b3.16b, b3.16b;                         \
+	SM4_CRYPT_BLK4_BE(b0, b1, b2, b3);
+
+#define ROUND8(round, s0, s1, s2, s3, t0, t1, t2, t3)           \
+	/* rk ^ s1 ^ s2 ^ s3 */                                 \
+	dup		RX0.4s, RKEY.s[round];                  \
+	eor		RTMP0.16b, s2.16b, s3.16b;              \
+	mov		RX1.16b, RX0.16b;                       \
+	eor		RTMP1.16b, t2.16b, t3.16b;              \
+	eor		RX0.16b, RX0.16b, s1.16b;               \
+	eor		RX1.16b, RX1.16b, t1.16b;               \
+	eor		RX0.16b, RX0.16b, RTMP0.16b;            \
+	eor		RX1.16b, RX1.16b, RTMP1.16b;            \
+                                                                \
+	/* sbox, non-linear part */                             \
+	movi		RTMP3.16b, #64;  /* sizeof(sbox) / 4 */ \
+	tbl		RTMP0.16b, {v16.16b-v19.16b}, RX0.16b;  \
+	tbl		RTMP1.16b, {v16.16b-v19.16b}, RX1.16b;  \
+	sub		RX0.16b, RX0.16b, RTMP3.16b;            \
+	sub		RX1.16b, RX1.16b, RTMP3.16b;            \
+	tbx		RTMP0.16b, {v20.16b-v23.16b}, RX0.16b;  \
+	tbx		RTMP1.16b, {v20.16b-v23.16b}, RX1.16b;  \
+	sub		RX0.16b, RX0.16b, RTMP3.16b;            \
+	sub		RX1.16b, RX1.16b, RTMP3.16b;            \
+	tbx		RTMP0.16b, {v24.16b-v27.16b}, RX0.16b;  \
+	tbx		RTMP1.16b, {v24.16b-v27.16b}, RX1.16b;  \
+	sub		RX0.16b, RX0.16b, RTMP3.16b;            \
+	sub		RX1.16b, RX1.16b, RTMP3.16b;            \
+	tbx		RTMP0.16b, {v28.16b-v31.16b}, RX0.16b;  \
+	tbx		RTMP1.16b, {v28.16b-v31.16b}, RX1.16b;  \
+                                                                \
+	/* linear part */                                       \
+	shl		RX0.4s, RTMP0.4s, #8;                   \
+	shl		RX1.4s, RTMP1.4s, #8;                   \
+	shl		RTMP2.4s, RTMP0.4s, #16;                \
+	shl		RTMP3.4s, RTMP1.4s, #16;                \
+	sri		RX0.4s, RTMP0.4s, #(32 - 8);            \
+	sri		RX1.4s, RTMP1.4s, #(32 - 8);            \
+	sri		RTMP2.4s, RTMP0.4s, #(32 - 16);         \
+	sri		RTMP3.4s, RTMP1.4s, #(32 - 16);         \
+	/* RX = x ^ rol32(x, 8) ^ rol32(x, 16) */               \
+	eor		RX0.16b, RX0.16b, RTMP0.16b;            \
+	eor		RX1.16b, RX1.16b, RTMP1.16b;            \
+	eor		RX0.16b, RX0.16b, RTMP2.16b;            \
+	eor		RX1.16b, RX1.16b, RTMP3.16b;            \
+	/* RTMP0/1 ^= x ^ rol32(x, 24) ^ rol32(RX, 2) */        \
+	shl		RTMP2.4s, RTMP0.4s, #24;                \
+	shl		RTMP3.4s, RTMP1.4s, #24;                \
+	sri		RTMP2.4s, RTMP0.4s, #(32 - 24);         \
+	sri		RTMP3.4s, RTMP1.4s, #(32 - 24);         \
+	eor		RTMP0.16b, RTMP0.16b, RTMP2.16b;        \
+	eor		RTMP1.16b, RTMP1.16b, RTMP3.16b;        \
+	shl		RTMP2.4s, RX0.4s, #2;                   \
+	shl		RTMP3.4s, RX1.4s, #2;                   \
+	sri		RTMP2.4s, RX0.4s, #(32 - 2);            \
+	sri		RTMP3.4s, RX1.4s, #(32 - 2);            \
+	eor		RTMP0.16b, RTMP0.16b, RTMP2.16b;        \
+	eor		RTMP1.16b, RTMP1.16b, RTMP3.16b;        \
+	/* s0/t0 ^= RTMP0/1 */                                  \
+	eor		s0.16b, s0.16b, RTMP0.16b;              \
+	eor		t0.16b, t0.16b, RTMP1.16b;
+
+#define SM4_CRYPT_BLK8_norotate(b0, b1, b2, b3, b4, b5, b6, b7) \
+	rev32		b0.16b, b0.16b;                         \
+	rev32		b1.16b, b1.16b;                         \
+	rev32		b2.16b, b2.16b;                         \
+	rev32		b3.16b, b3.16b;                         \
+	rev32		b4.16b, b4.16b;                         \
+	rev32		b5.16b, b5.16b;                         \
+	rev32		b6.16b, b6.16b;                         \
+	rev32		b7.16b, b7.16b;                         \
+                                                                \
+	mov		x6, 8;                                  \
+8:                                                              \
+	ld1		{RKEY.4s}, [x0], #16;                   \
+	subs		x6, x6, #1;                             \
+                                                                \
+	ROUND8(0, b0, b1, b2, b3, b4, b5, b6, b7);              \
+	ROUND8(1, b1, b2, b3, b0, b5, b6, b7, b4);              \
+	ROUND8(2, b2, b3, b0, b1, b6, b7, b4, b5);              \
+	ROUND8(3, b3, b0, b1, b2, b7, b4, b5, b6);              \
+                                                                \
+	bne		8b;                                     \
+                                                                \
+	rev32		b0.16b, b0.16b;                         \
+	rev32		b1.16b, b1.16b;                         \
+	rev32		b2.16b, b2.16b;                         \
+	rev32		b3.16b, b3.16b;                         \
+	rev32		b4.16b, b4.16b;                         \
+	rev32		b5.16b, b5.16b;                         \
+	rev32		b6.16b, b6.16b;                         \
+	rev32		b7.16b, b7.16b;                         \
+                                                                \
+	/* repoint to rkey */                                   \
+	sub		x0, x0, #128;
+
+#define SM4_CRYPT_BLK8(b0, b1, b2, b3, b4, b5, b6, b7)			\
+	SM4_CRYPT_BLK8_norotate(b0, b1, b2, b3, b4, b5, b6, b7);	\
+	rotate_clockwise_4x4_2x(b0, b1, b2, b3, b4, b5, b6, b7);	\
+
+
+.align 3
+SYM_FUNC_START(sm4_neon_crypt)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   w3: nblocks
+	 */
+	SM4_PREPARE()
+
+.Lcrypt_loop_8x:
+	sub		w3, w3, #8
+	tbnz		w3, #31, .Lcrypt_4x
+
+	ld4		{v0.4s-v3.4s}, [x2], #64
+	ld4		{v4.4s-v7.4s}, [x2], #64
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	cbz		w3, .Lcrypt_end
+	b		.Lcrypt_loop_8x
+
+.Lcrypt_4x:
+	add		w3, w3, #8
+	cmp		w3, #4
+	blt		.Lcrypt_tail
+
+	sub		w3, w3, #4
+
+	ld4		{v0.4s-v3.4s}, [x2], #64
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	cbz		w3, .Lcrypt_end
+
+.Lcrypt_tail:
+	cmp		w3, #2
+	ld1		{v0.16b}, [x2], #16
+	blt		.Lcrypt_tail_load_done
+	ld1		{v1.16b}, [x2], #16
+	beq		.Lcrypt_tail_load_done
+	ld1		{v2.16b}, [x2], #16
+
+.Lcrypt_tail_load_done:
+	transpose_4x4(v0, v1, v2, v3)
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	cmp		w3, #2
+	st1		{v0.16b}, [x1], #16
+	blt		.Lcrypt_end
+	st1		{v1.16b}, [x1], #16
+	beq		.Lcrypt_end
+	st1		{v2.16b}, [x1], #16
+
+.Lcrypt_end:
+	ret
+SYM_FUNC_END(sm4_neon_crypt)
+
+.align 3
+SYM_FUNC_START(sm4_neon_cbc_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE()
+
+	ld1		{RIV.16b}, [x3]
+
+.Lcbc_dec_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lcbc_dec_4x
+
+	ld4		{v0.4s-v3.4s}, [x2], #64
+	ld4		{v4.4s-v7.4s}, [x2]
+
+	SM4_CRYPT_BLK8_norotate(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	/* Avoid overwriting the RIV register */
+	rotate_clockwise_4x4(v0, v1, v2, v3)
+	rotate_clockwise_4x4(v4, v5, v6, v7)
+
+	sub		x2, x2, #64
+
+	eor		v0.16b, v0.16b, RIV.16b
+
+	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
+	ld1		{RTMP4.16b-RTMP7.16b}, [x2], #64
+
+	eor		v1.16b, v1.16b, RTMP0.16b
+	eor		v2.16b, v2.16b, RTMP1.16b
+	eor		v3.16b, v3.16b, RTMP2.16b
+	eor		v4.16b, v4.16b, RTMP3.16b
+	eor		v5.16b, v5.16b, RTMP4.16b
+	eor		v6.16b, v6.16b, RTMP5.16b
+	eor		v7.16b, v7.16b, RTMP6.16b
+
+	mov		RIV.16b, RTMP7.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	cbz		w4, .Lcbc_dec_end
+	b		.Lcbc_dec_loop_8x
+
+.Lcbc_dec_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lcbc_dec_tail
+
+	sub		w4, w4, #4
+
+	ld1		{v0.16b-v3.16b}, [x2], #64
+
+	rev32		v4.16b, v0.16b
+	rev32		v5.16b, v1.16b
+	rev32		v6.16b, v2.16b
+	rev32		v7.16b, v3.16b
+
+	transpose_4x4(v4, v5, v6, v7)
+
+	SM4_CRYPT_BLK4_BE(v4, v5, v6, v7)
+
+	eor		v4.16b, v4.16b, RIV.16b
+	eor		v5.16b, v5.16b, v0.16b
+	eor		v6.16b, v6.16b, v1.16b
+	eor		v7.16b, v7.16b, v2.16b
+
+	mov		RIV.16b, v3.16b
+
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	cbz		w4, .Lcbc_dec_end
+
+.Lcbc_dec_tail:
+	cmp		w4, #2
+	ld1		{v0.16b}, [x2], #16
+	blt		.Lcbc_dec_tail_load_done
+	ld1		{v1.16b}, [x2], #16
+	beq		.Lcbc_dec_tail_load_done
+	ld1		{v2.16b}, [x2], #16
+
+.Lcbc_dec_tail_load_done:
+	rev32		v4.16b, v0.16b
+	rev32		v5.16b, v1.16b
+	rev32		v6.16b, v2.16b
+
+	transpose_4x4(v4, v5, v6, v7)
+
+	SM4_CRYPT_BLK4_BE(v4, v5, v6, v7)
+
+	cmp		w4, #2
+	eor		v4.16b, v4.16b, RIV.16b
+	mov		RIV.16b, v0.16b
+	st1		{v4.16b}, [x1], #16
+	blt		.Lcbc_dec_end
+
+	eor		v5.16b, v5.16b, v0.16b
+	mov		RIV.16b, v1.16b
+	st1		{v5.16b}, [x1], #16
+	beq		.Lcbc_dec_end
+
+	eor		v6.16b, v6.16b, v1.16b
+	mov		RIV.16b, v2.16b
+	st1		{v6.16b}, [x1], #16
+
+.Lcbc_dec_end:
+	/* store new IV */
+	st1		{RIV.16b}, [x3]
+
+	ret
+SYM_FUNC_END(sm4_neon_cbc_dec)
+
+.align 3
+SYM_FUNC_START(sm4_neon_cfb_dec)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: iv (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE()
+
+	ld1		{v0.16b}, [x3]
+
+.Lcfb_dec_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lcfb_dec_4x
+
+	ld1		{v1.16b-v3.16b}, [x2], #48
+	ld4		{v4.4s-v7.4s}, [x2]
+
+	transpose_4x4(v0, v1, v2, v3)
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	sub		x2, x2, #48
+	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
+	ld1		{RTMP4.16b-RTMP7.16b}, [x2], #64
+
+	eor		v0.16b, v0.16b, RTMP0.16b
+	eor		v1.16b, v1.16b, RTMP1.16b
+	eor		v2.16b, v2.16b, RTMP2.16b
+	eor		v3.16b, v3.16b, RTMP3.16b
+	eor		v4.16b, v4.16b, RTMP4.16b
+	eor		v5.16b, v5.16b, RTMP5.16b
+	eor		v6.16b, v6.16b, RTMP6.16b
+	eor		v7.16b, v7.16b, RTMP7.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	mov		v0.16b, RTMP7.16b
+
+	cbz		w4, .Lcfb_dec_end
+	b		.Lcfb_dec_loop_8x
+
+.Lcfb_dec_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lcfb_dec_tail
+
+	sub		w4, w4, #4
+
+	ld1		{v4.16b-v7.16b}, [x2], #64
+
+	rev32		v0.16b, v0.16b		/* v0 is IV register */
+	rev32		v1.16b, v4.16b
+	rev32		v2.16b, v5.16b
+	rev32		v3.16b, v6.16b
+
+	transpose_4x4(v0, v1, v2, v3)
+
+	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
+
+	eor		v0.16b, v0.16b, v4.16b
+	eor		v1.16b, v1.16b, v5.16b
+	eor		v2.16b, v2.16b, v6.16b
+	eor		v3.16b, v3.16b, v7.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	mov		v0.16b, v7.16b
+
+	cbz		w4, .Lcfb_dec_end
+
+.Lcfb_dec_tail:
+	cmp		w4, #2
+	ld1		{v4.16b}, [x2], #16
+	blt		.Lcfb_dec_tail_load_done
+	ld1		{v5.16b}, [x2], #16
+	beq		.Lcfb_dec_tail_load_done
+	ld1		{v6.16b}, [x2], #16
+
+.Lcfb_dec_tail_load_done:
+	rev32		v0.16b, v0.16b		/* v0 is IV register */
+	rev32		v1.16b, v4.16b
+	rev32		v2.16b, v5.16b
+
+	transpose_4x4(v0, v1, v2, v3)
+
+	SM4_CRYPT_BLK4_BE(v0, v1, v2, v3)
+
+	cmp		w4, #2
+	eor		v0.16b, v0.16b, v4.16b
+	st1		{v0.16b}, [x1], #16
+	mov		v0.16b, v4.16b
+	blt		.Lcfb_dec_end
+
+	eor		v1.16b, v1.16b, v5.16b
+	st1		{v1.16b}, [x1], #16
+	mov		v0.16b, v5.16b
+	beq		.Lcfb_dec_end
+
+	eor		v2.16b, v2.16b, v6.16b
+	st1		{v2.16b}, [x1], #16
+	mov		v0.16b, v6.16b
+
+.Lcfb_dec_end:
+	/* store new IV */
+	st1		{v0.16b}, [x3]
+
+	ret
+SYM_FUNC_END(sm4_neon_cfb_dec)
+
+.align 3
+SYM_FUNC_START(sm4_neon_ctr_crypt)
+	/* input:
+	 *   x0: round key array, CTX
+	 *   x1: dst
+	 *   x2: src
+	 *   x3: ctr (big endian, 128 bit)
+	 *   w4: nblocks
+	 */
+	SM4_PREPARE()
+
+	ldp		x7, x8, [x3]
+	rev		x7, x7
+	rev		x8, x8
+
+.Lctr_crypt_loop_8x:
+	sub		w4, w4, #8
+	tbnz		w4, #31, .Lctr_crypt_4x
+
+#define inc_le128(vctr)                             \
+		mov		vctr.d[1], x8;      \
+		mov		vctr.d[0], x7;      \
+		adds		x8, x8, #1;         \
+		rev64		vctr.16b, vctr.16b; \
+		adc		x7, x7, xzr;
+
+	/* construct CTRs */
+	inc_le128(v0)			/* +0 */
+	inc_le128(v1)			/* +1 */
+	inc_le128(v2)			/* +2 */
+	inc_le128(v3)			/* +3 */
+	inc_le128(v4)			/* +4 */
+	inc_le128(v5)			/* +5 */
+	inc_le128(v6)			/* +6 */
+	inc_le128(v7)			/* +7 */
+
+	transpose_4x4_2x(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	SM4_CRYPT_BLK8(v0, v1, v2, v3, v4, v5, v6, v7)
+
+	ld1		{RTMP0.16b-RTMP3.16b}, [x2], #64
+	ld1		{RTMP4.16b-RTMP7.16b}, [x2], #64
+
+	eor		v0.16b, v0.16b, RTMP0.16b
+	eor		v1.16b, v1.16b, RTMP1.16b
+	eor		v2.16b, v2.16b, RTMP2.16b
+	eor		v3.16b, v3.16b, RTMP3.16b
+	eor		v4.16b, v4.16b, RTMP4.16b
+	eor		v5.16b, v5.16b, RTMP5.16b
+	eor		v6.16b, v6.16b, RTMP6.16b
+	eor		v7.16b, v7.16b, RTMP7.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+	st1		{v4.16b-v7.16b}, [x1], #64
+
+	cbz		w4, .Lctr_crypt_end
+	b		.Lctr_crypt_loop_8x
+
+.Lctr_crypt_4x:
+	add		w4, w4, #8
+	cmp		w4, #4
+	blt		.Lctr_crypt_tail
+
+	sub		w4, w4, #4
+
+	/* construct CTRs */
+	inc_le128(v0)			/* +0 */
+	inc_le128(v1)			/* +1 */
+	inc_le128(v2)			/* +2 */
+	inc_le128(v3)			/* +3 */
+
+	ld1		{v4.16b-v7.16b}, [x2], #64
+
+	transpose_4x4(v0, v1, v2, v3)
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	eor		v0.16b, v0.16b, v4.16b
+	eor		v1.16b, v1.16b, v5.16b
+	eor		v2.16b, v2.16b, v6.16b
+	eor		v3.16b, v3.16b, v7.16b
+
+	st1		{v0.16b-v3.16b}, [x1], #64
+
+	cbz		w4, .Lctr_crypt_end
+
+.Lctr_crypt_tail:
+	/* inc_le128 will change the sign bit */
+	ld1		{v4.16b}, [x2], #16
+	inc_le128(v0)
+	cmp		w4, #2
+	blt		.Lctr_crypt_tail_load_done
+
+	ld1		{v5.16b}, [x2], #16
+	inc_le128(v1)
+	cmp		w4, #2
+	beq		.Lctr_crypt_tail_load_done
+
+	ld1		{v6.16b}, [x2], #16
+	inc_le128(v2)
+
+.Lctr_crypt_tail_load_done:
+	transpose_4x4(v0, v1, v2, v3)
+
+	SM4_CRYPT_BLK4(v0, v1, v2, v3)
+
+	cmp		w4, #2
+
+	eor		v0.16b, v0.16b, v4.16b
+	st1		{v0.16b}, [x1], #16
+	blt		.Lctr_crypt_end
+
+	eor		v1.16b, v1.16b, v5.16b
+	st1		{v1.16b}, [x1], #16
+	beq		.Lctr_crypt_end
+
+	eor		v2.16b, v2.16b, v6.16b
+	st1		{v2.16b}, [x1], #16
+
+.Lctr_crypt_end:
+	/* store new CTR */
+	rev		x7, x7
+	rev		x8, x8
+	stp		x7, x8, [x3]
+
+	ret
+SYM_FUNC_END(sm4_neon_ctr_crypt)
diff --git a/arch/arm64/crypto/sm4-neon-glue.c b/arch/arm64/crypto/sm4-neon-glue.c
new file mode 100644
index 000000000..7b19accf5
--- /dev/null
+++ b/arch/arm64/crypto/sm4-neon-glue.c
@@ -0,0 +1,360 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM4 Cipher Algorithm, using ARMv8 NEON
+ * as specified in
+ * https://tools.ietf.org/id/draft-ribose-cfrg-sm4-10.html
+ *
+ * Copyright (C) 2022, Alibaba Group.
+ * Copyright (C) 2022 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#include <linux/module.h>
+#include <linux/crypto.h>
+#include <linux/kernel.h>
+#include <linux/cpufeature.h>
+#include <asm/neon.h>
+#include <asm/simd.h>
+#include <crypto/internal/simd.h>
+#include <crypto/internal/skcipher.h>
+#include <crypto/sm4.h>
+
+asmlinkage void sm4_neon_crypt(const u32 *rkey, u8 *dst, const u8 *src,
+			       unsigned int nblocks);
+asmlinkage void sm4_neon_cbc_dec(const u32 *rkey_dec, u8 *dst, const u8 *src,
+				 u8 *iv, unsigned int nblocks);
+asmlinkage void sm4_neon_cfb_dec(const u32 *rkey_enc, u8 *dst, const u8 *src,
+				 u8 *iv, unsigned int nblocks);
+asmlinkage void sm4_neon_ctr_crypt(const u32 *rkey_enc, u8 *dst, const u8 *src,
+				   u8 *iv, unsigned int nblocks);
+
+static int sm4_setkey(struct crypto_skcipher *tfm, const u8 *key,
+		      unsigned int key_len)
+{
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_expandkey(ctx, key, key_len);
+}
+
+static int sm4_ecb_do_crypt(struct skcipher_request *req, const u32 *rkey)
+{
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblocks;
+
+		nblocks = nbytes / SM4_BLOCK_SIZE;
+		if (nblocks) {
+			kernel_neon_begin();
+
+			sm4_neon_crypt(rkey, dst, src, nblocks);
+
+			kernel_neon_end();
+		}
+
+		err = skcipher_walk_done(&walk, nbytes % SM4_BLOCK_SIZE);
+	}
+
+	return err;
+}
+
+static int sm4_ecb_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_ecb_do_crypt(req, ctx->rkey_enc);
+}
+
+static int sm4_ecb_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+
+	return sm4_ecb_do_crypt(req, ctx->rkey_dec);
+}
+
+static int sm4_cbc_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *iv = walk.iv;
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+
+		while (nbytes >= SM4_BLOCK_SIZE) {
+			crypto_xor_cpy(dst, src, iv, SM4_BLOCK_SIZE);
+			sm4_crypt_block(ctx->rkey_enc, dst, dst);
+			iv = dst;
+			src += SM4_BLOCK_SIZE;
+			dst += SM4_BLOCK_SIZE;
+			nbytes -= SM4_BLOCK_SIZE;
+		}
+		if (iv != walk.iv)
+			memcpy(walk.iv, iv, SM4_BLOCK_SIZE);
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_cbc_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblocks;
+
+		nblocks = nbytes / SM4_BLOCK_SIZE;
+		if (nblocks) {
+			kernel_neon_begin();
+
+			sm4_neon_cbc_dec(ctx->rkey_dec, dst, src,
+					 walk.iv, nblocks);
+
+			kernel_neon_end();
+		}
+
+		err = skcipher_walk_done(&walk, nbytes % SM4_BLOCK_SIZE);
+	}
+
+	return err;
+}
+
+static int sm4_cfb_encrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		u8 keystream[SM4_BLOCK_SIZE];
+		const u8 *iv = walk.iv;
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+
+		while (nbytes >= SM4_BLOCK_SIZE) {
+			sm4_crypt_block(ctx->rkey_enc, keystream, iv);
+			crypto_xor_cpy(dst, src, keystream, SM4_BLOCK_SIZE);
+			iv = dst;
+			src += SM4_BLOCK_SIZE;
+			dst += SM4_BLOCK_SIZE;
+			nbytes -= SM4_BLOCK_SIZE;
+		}
+		if (iv != walk.iv)
+			memcpy(walk.iv, iv, SM4_BLOCK_SIZE);
+
+		/* tail */
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+			crypto_xor_cpy(dst, src, keystream, nbytes);
+			nbytes = 0;
+		}
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_cfb_decrypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblocks;
+
+		nblocks = nbytes / SM4_BLOCK_SIZE;
+		if (nblocks) {
+			kernel_neon_begin();
+
+			sm4_neon_cfb_dec(ctx->rkey_enc, dst, src,
+					 walk.iv, nblocks);
+
+			kernel_neon_end();
+
+			dst += nblocks * SM4_BLOCK_SIZE;
+			src += nblocks * SM4_BLOCK_SIZE;
+			nbytes -= nblocks * SM4_BLOCK_SIZE;
+		}
+
+		/* tail */
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			u8 keystream[SM4_BLOCK_SIZE];
+
+			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+			crypto_xor_cpy(dst, src, keystream, nbytes);
+			nbytes = 0;
+		}
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static int sm4_ctr_crypt(struct skcipher_request *req)
+{
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct sm4_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
+	int err;
+
+	err = skcipher_walk_virt(&walk, req, false);
+
+	while ((nbytes = walk.nbytes) > 0) {
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		unsigned int nblocks;
+
+		nblocks = nbytes / SM4_BLOCK_SIZE;
+		if (nblocks) {
+			kernel_neon_begin();
+
+			sm4_neon_ctr_crypt(ctx->rkey_enc, dst, src,
+					   walk.iv, nblocks);
+
+			kernel_neon_end();
+
+			dst += nblocks * SM4_BLOCK_SIZE;
+			src += nblocks * SM4_BLOCK_SIZE;
+			nbytes -= nblocks * SM4_BLOCK_SIZE;
+		}
+
+		/* tail */
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			u8 keystream[SM4_BLOCK_SIZE];
+
+			sm4_crypt_block(ctx->rkey_enc, keystream, walk.iv);
+			crypto_inc(walk.iv, SM4_BLOCK_SIZE);
+			crypto_xor_cpy(dst, src, keystream, nbytes);
+			nbytes = 0;
+		}
+
+		err = skcipher_walk_done(&walk, nbytes);
+	}
+
+	return err;
+}
+
+static struct skcipher_alg sm4_algs[] = {
+	{
+		.base = {
+			.cra_name		= "ecb(sm4)",
+			.cra_driver_name	= "ecb-sm4-neon",
+			.cra_priority		= 200,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_ecb_encrypt,
+		.decrypt	= sm4_ecb_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "cbc(sm4)",
+			.cra_driver_name	= "cbc-sm4-neon",
+			.cra_priority		= 200,
+			.cra_blocksize		= SM4_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_cbc_encrypt,
+		.decrypt	= sm4_cbc_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "cfb(sm4)",
+			.cra_driver_name	= "cfb-sm4-neon",
+			.cra_priority		= 200,
+			.cra_blocksize		= 1,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.chunksize	= SM4_BLOCK_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_cfb_encrypt,
+		.decrypt	= sm4_cfb_decrypt,
+	}, {
+		.base = {
+			.cra_name		= "ctr(sm4)",
+			.cra_driver_name	= "ctr-sm4-neon",
+			.cra_priority		= 200,
+			.cra_blocksize		= 1,
+			.cra_ctxsize		= sizeof(struct sm4_ctx),
+			.cra_module		= THIS_MODULE,
+		},
+		.min_keysize	= SM4_KEY_SIZE,
+		.max_keysize	= SM4_KEY_SIZE,
+		.ivsize		= SM4_BLOCK_SIZE,
+		.chunksize	= SM4_BLOCK_SIZE,
+		.setkey		= sm4_setkey,
+		.encrypt	= sm4_ctr_crypt,
+		.decrypt	= sm4_ctr_crypt,
+	}
+};
+
+static int __init sm4_init(void)
+{
+	return crypto_register_skciphers(sm4_algs, ARRAY_SIZE(sm4_algs));
+}
+
+static void __exit sm4_exit(void)
+{
+	crypto_unregister_skciphers(sm4_algs, ARRAY_SIZE(sm4_algs));
+}
+
+module_init(sm4_init);
+module_exit(sm4_exit);
+
+MODULE_DESCRIPTION("SM4 ECB/CBC/CFB/CTR using ARMv8 NEON");
+MODULE_ALIAS_CRYPTO("sm4-neon");
+MODULE_ALIAS_CRYPTO("sm4");
+MODULE_ALIAS_CRYPTO("ecb(sm4)");
+MODULE_ALIAS_CRYPTO("cbc(sm4)");
+MODULE_ALIAS_CRYPTO("cfb(sm4)");
+MODULE_ALIAS_CRYPTO("ctr(sm4)");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/hyperv/Makefile b/arch/arm64/hyperv/Makefile
new file mode 100644
index 000000000..87c31c001
--- /dev/null
+++ b/arch/arm64/hyperv/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y		:= hv_core.o mshyperv.o
diff --git a/arch/arm64/hyperv/hv_core.c b/arch/arm64/hyperv/hv_core.c
new file mode 100644
index 000000000..b54c34793
--- /dev/null
+++ b/arch/arm64/hyperv/hv_core.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Low level utility routines for interacting with Hyper-V.
+ *
+ * Copyright (C) 2021, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@microsoft.com>
+ */
+
+#include <linux/types.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/hyperv.h>
+#include <linux/arm-smccc.h>
+#include <linux/module.h>
+#include <asm-generic/bug.h>
+#include <asm/hyperv-tlfs.h>
+#include <asm/mshyperv.h>
+
+/*
+ * hv_do_hypercall- Invoke the specified hypercall
+ */
+u64 hv_do_hypercall(u64 control, void *input, void *output)
+{
+	struct arm_smccc_res	res;
+	u64			input_address;
+	u64			output_address;
+
+	input_address = input ? virt_to_phys(input) : 0;
+	output_address = output ? virt_to_phys(output) : 0;
+
+	arm_smccc_1_1_hvc(HV_FUNC_ID, control,
+			  input_address, output_address, &res);
+	return res.a0;
+}
+EXPORT_SYMBOL_GPL(hv_do_hypercall);
+
+/*
+ * hv_do_fast_hypercall8 -- Invoke the specified hypercall
+ * with arguments in registers instead of physical memory.
+ * Avoids the overhead of virt_to_phys for simple hypercalls.
+ */
+
+u64 hv_do_fast_hypercall8(u16 code, u64 input)
+{
+	struct arm_smccc_res	res;
+	u64			control;
+
+	control = (u64)code | HV_HYPERCALL_FAST_BIT;
+
+	arm_smccc_1_1_hvc(HV_FUNC_ID, control, input, &res);
+	return res.a0;
+}
+EXPORT_SYMBOL_GPL(hv_do_fast_hypercall8);
+
+/*
+ * Set a single VP register to a 64-bit value.
+ */
+void hv_set_vpreg(u32 msr, u64 value)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_hvc(HV_FUNC_ID,
+		HVCALL_SET_VP_REGISTERS | HV_HYPERCALL_FAST_BIT |
+			HV_HYPERCALL_REP_COMP_1,
+		HV_PARTITION_ID_SELF,
+		HV_VP_INDEX_SELF,
+		msr,
+		0,
+		value,
+		0,
+		&res);
+
+	/*
+	 * Something is fundamentally broken in the hypervisor if
+	 * setting a VP register fails. There's really no way to
+	 * continue as a guest VM, so panic.
+	 */
+	BUG_ON(!hv_result_success(res.a0));
+}
+EXPORT_SYMBOL_GPL(hv_set_vpreg);
+
+/*
+ * Get the value of a single VP register.  One version
+ * returns just 64 bits and another returns the full 128 bits.
+ * The two versions are separate to avoid complicating the
+ * calling sequence for the more frequently used 64 bit version.
+ */
+
+void hv_get_vpreg_128(u32 msr, struct hv_get_vp_registers_output *result)
+{
+	struct arm_smccc_1_2_regs args;
+	struct arm_smccc_1_2_regs res;
+
+	args.a0 = HV_FUNC_ID;
+	args.a1 = HVCALL_GET_VP_REGISTERS | HV_HYPERCALL_FAST_BIT |
+			HV_HYPERCALL_REP_COMP_1;
+	args.a2 = HV_PARTITION_ID_SELF;
+	args.a3 = HV_VP_INDEX_SELF;
+	args.a4 = msr;
+
+	/*
+	 * Use the SMCCC 1.2 interface because the results are in registers
+	 * beyond X0-X3.
+	 */
+	arm_smccc_1_2_hvc(&args, &res);
+
+	/*
+	 * Something is fundamentally broken in the hypervisor if
+	 * getting a VP register fails. There's really no way to
+	 * continue as a guest VM, so panic.
+	 */
+	BUG_ON(!hv_result_success(res.a0));
+
+	result->as64.low = res.a6;
+	result->as64.high = res.a7;
+}
+EXPORT_SYMBOL_GPL(hv_get_vpreg_128);
+
+u64 hv_get_vpreg(u32 msr)
+{
+	struct hv_get_vp_registers_output output;
+
+	hv_get_vpreg_128(msr, &output);
+
+	return output.as64.low;
+}
+EXPORT_SYMBOL_GPL(hv_get_vpreg);
+
+/*
+ * hyperv_report_panic - report a panic to Hyper-V.  This function uses
+ * the older version of the Hyper-V interface that admittedly doesn't
+ * pass enough information to be useful beyond just recording the
+ * occurrence of a panic. The parallel hv_kmsg_dump() uses the
+ * new interface that allows reporting 4 Kbytes of data, which is much
+ * more useful. Hyper-V on ARM64 always supports the newer interface, but
+ * we retain support for the older version because the sysadmin is allowed
+ * to disable the newer version via sysctl in case of information security
+ * concerns about the more verbose version.
+ */
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
+{
+	static bool	panic_reported;
+	u64		guest_id;
+
+	/* Don't report a panic to Hyper-V if we're not going to panic */
+	if (in_die && !panic_on_oops)
+		return;
+
+	/*
+	 * We prefer to report panic on 'die' chain as we have proper
+	 * registers to report, but if we miss it (e.g. on BUG()) we need
+	 * to report it on 'panic'.
+	 *
+	 * Calling code in the 'die' and 'panic' paths ensures that only
+	 * one CPU is running this code, so no atomicity is needed.
+	 */
+	if (panic_reported)
+		return;
+	panic_reported = true;
+
+	guest_id = hv_get_vpreg(HV_REGISTER_GUEST_OSID);
+
+	/*
+	 * Hyper-V provides the ability to store only 5 values.
+	 * Pick the passed in error value, the guest_id, the PC,
+	 * and the SP.
+	 */
+	hv_set_vpreg(HV_REGISTER_CRASH_P0, err);
+	hv_set_vpreg(HV_REGISTER_CRASH_P1, guest_id);
+	hv_set_vpreg(HV_REGISTER_CRASH_P2, regs->pc);
+	hv_set_vpreg(HV_REGISTER_CRASH_P3, regs->sp);
+	hv_set_vpreg(HV_REGISTER_CRASH_P4, 0);
+
+	/*
+	 * Let Hyper-V know there is crash data available
+	 */
+	hv_set_vpreg(HV_REGISTER_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY);
+}
+EXPORT_SYMBOL_GPL(hyperv_report_panic);
diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
new file mode 100644
index 000000000..f1b8a04ee
--- /dev/null
+++ b/arch/arm64/hyperv/mshyperv.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Core routines for interacting with Microsoft's Hyper-V hypervisor,
+ * including hypervisor initialization.
+ *
+ * Copyright (C) 2021, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@microsoft.com>
+ */
+
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/version.h>
+#include <linux/cpuhotplug.h>
+#include <asm/mshyperv.h>
+
+static bool hyperv_initialized;
+
+static int __init hyperv_init(void)
+{
+	struct hv_get_vp_registers_output	result;
+	u32	a, b, c, d;
+	u64	guest_id;
+	int	ret;
+
+	/*
+	 * Allow for a kernel built with CONFIG_HYPERV to be running in
+	 * a non-Hyper-V environment, including on DT instead of ACPI.
+	 * In such cases, do nothing and return success.
+	 */
+	if (acpi_disabled)
+		return 0;
+
+	if (strncmp((char *)&acpi_gbl_FADT.hypervisor_id, "MsHyperV", 8))
+		return 0;
+
+	/* Setup the guest ID */
+	guest_id = hv_generate_guest_id(LINUX_VERSION_CODE);
+	hv_set_vpreg(HV_REGISTER_GUEST_OSID, guest_id);
+
+	/* Get the features and hints from Hyper-V */
+	hv_get_vpreg_128(HV_REGISTER_FEATURES, &result);
+	ms_hyperv.features = result.as32.a;
+	ms_hyperv.priv_high = result.as32.b;
+	ms_hyperv.misc_features = result.as32.c;
+
+	hv_get_vpreg_128(HV_REGISTER_ENLIGHTENMENTS, &result);
+	ms_hyperv.hints = result.as32.a;
+
+	pr_info("Hyper-V: privilege flags low 0x%x, high 0x%x, hints 0x%x, misc 0x%x\n",
+		ms_hyperv.features, ms_hyperv.priv_high, ms_hyperv.hints,
+		ms_hyperv.misc_features);
+
+	/* Get information about the Hyper-V host version */
+	hv_get_vpreg_128(HV_REGISTER_HYPERVISOR_VERSION, &result);
+	a = result.as32.a;
+	b = result.as32.b;
+	c = result.as32.c;
+	d = result.as32.d;
+	pr_info("Hyper-V: Host Build %d.%d.%d.%d-%d-%d\n",
+		b >> 16, b & 0xFFFF, a,	d & 0xFFFFFF, c, d >> 24);
+
+	ret = hv_common_init();
+	if (ret)
+		return ret;
+
+	ret = cpuhp_setup_state(CPUHP_AP_HYPERV_ONLINE, "arm64/hyperv_init:online",
+				hv_common_cpu_init, hv_common_cpu_die);
+	if (ret < 0) {
+		hv_common_free();
+		return ret;
+	}
+
+	hyperv_initialized = true;
+	return 0;
+}
+
+early_initcall(hyperv_init);
+
+bool hv_is_hyperv_initialized(void)
+{
+	return hyperv_initialized;
+}
+EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized);
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
new file mode 100644
index 000000000..5c8ee5a54
--- /dev/null
+++ b/arch/arm64/include/asm/Kbuild
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+generic-y += early_ioremap.h
+generic-y += mcs_spinlock.h
+generic-y += qrwlock.h
+generic-y += qspinlock.h
+generic-y += parport.h
+generic-y += user.h
+
+generated-y += cpucaps.h
+generated-y += sysreg-defs.h
diff --git a/arch/arm64/include/asm/acenv.h b/arch/arm64/include/asm/acenv.h
new file mode 100644
index 000000000..f1f810dc9
--- /dev/null
+++ b/arch/arm64/include/asm/acenv.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ARM64 specific ACPICA environments and implementation
+ *
+ * Copyright (C) 2014, Linaro Ltd.
+ *   Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *   Author: Graeme Gregory <graeme.gregory@linaro.org>
+ */
+
+#ifndef _ASM_ACENV_H
+#define _ASM_ACENV_H
+
+/* It is required unconditionally by ACPI core, update it when needed. */
+
+#endif /* _ASM_ACENV_H */
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
new file mode 100644
index 000000000..6792a1f83
--- /dev/null
+++ b/arch/arm64/include/asm/acpi.h
@@ -0,0 +1,179 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 2013-2014, Linaro Ltd.
+ *	Author: Al Stone <al.stone@linaro.org>
+ *	Author: Graeme Gregory <graeme.gregory@linaro.org>
+ *	Author: Hanjun Guo <hanjun.guo@linaro.org>
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#include <linux/cpuidle.h>
+#include <linux/efi.h>
+#include <linux/memblock.h>
+#include <linux/psci.h>
+#include <linux/stddef.h>
+
+#include <asm/cputype.h>
+#include <asm/io.h>
+#include <asm/ptrace.h>
+#include <asm/smp_plat.h>
+#include <asm/tlbflush.h>
+
+/* Macros for consistency checks of the GICC subtable of MADT */
+
+/*
+ * MADT GICC minimum length refers to the MADT GICC structure table length as
+ * defined in the earliest ACPI version supported on arm64, ie ACPI 5.1.
+ *
+ * The efficiency_class member was added to the
+ * struct acpi_madt_generic_interrupt to represent the MADT GICC structure
+ * "Processor Power Efficiency Class" field, added in ACPI 6.0 whose offset
+ * is therefore used to delimit the MADT GICC structure minimum length
+ * appropriately.
+ */
+#define ACPI_MADT_GICC_MIN_LENGTH   offsetof(  \
+	struct acpi_madt_generic_interrupt, efficiency_class)
+
+#define BAD_MADT_GICC_ENTRY(entry, end)					\
+	(!(entry) || (entry)->header.length < ACPI_MADT_GICC_MIN_LENGTH || \
+	(unsigned long)(entry) + (entry)->header.length > (end))
+
+#define ACPI_MADT_GICC_SPE  (offsetof(struct acpi_madt_generic_interrupt, \
+	spe_interrupt) + sizeof(u16))
+
+#define ACPI_MADT_GICC_TRBE  (offsetof(struct acpi_madt_generic_interrupt, \
+	trbe_interrupt) + sizeof(u16))
+/*
+ * Arm® Functional Fixed Hardware Specification Version 1.2.
+ * Table 2: Arm Architecture context loss flags
+ */
+#define CPUIDLE_CORE_CTXT		BIT(0) /* Core context Lost */
+
+static inline unsigned int arch_get_idle_state_flags(u32 arch_flags)
+{
+	if (arch_flags & CPUIDLE_CORE_CTXT)
+		return CPUIDLE_FLAG_TIMER_STOP;
+
+	return 0;
+}
+#define arch_get_idle_state_flags arch_get_idle_state_flags
+
+#define CPUIDLE_TRACE_CTXT		BIT(1) /* Trace context loss */
+#define CPUIDLE_GICR_CTXT		BIT(2) /* GICR */
+#define CPUIDLE_GICD_CTXT		BIT(3) /* GICD */
+
+/* Basic configuration for ACPI */
+#ifdef	CONFIG_ACPI
+pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
+
+/* ACPI table mapping after acpi_permanent_mmap is set */
+void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
+#define acpi_os_ioremap acpi_os_ioremap
+
+typedef u64 phys_cpuid_t;
+#define PHYS_CPUID_INVALID INVALID_HWID
+
+#define acpi_strict 1	/* No out-of-spec workarounds on ARM64 */
+extern int acpi_disabled;
+extern int acpi_noirq;
+extern int acpi_pci_disabled;
+
+static inline void disable_acpi(void)
+{
+	acpi_disabled = 1;
+	acpi_pci_disabled = 1;
+	acpi_noirq = 1;
+}
+
+static inline void enable_acpi(void)
+{
+	acpi_disabled = 0;
+	acpi_pci_disabled = 0;
+	acpi_noirq = 0;
+}
+
+/*
+ * The ACPI processor driver for ACPI core code needs this macro
+ * to find out this cpu was already mapped (mapping from CPU hardware
+ * ID to CPU logical ID) or not.
+ */
+#define cpu_physical_id(cpu) cpu_logical_map(cpu)
+
+/*
+ * It's used from ACPI core in kdump to boot UP system with SMP kernel,
+ * with this check the ACPI core will not override the CPU index
+ * obtained from GICC with 0 and not print some error message as well.
+ * Since MADT must provide at least one GICC structure for GIC
+ * initialization, CPU will be always available in MADT on ARM64.
+ */
+static inline bool acpi_has_cpu_in_madt(void)
+{
+	return true;
+}
+
+struct acpi_madt_generic_interrupt *acpi_cpu_get_madt_gicc(int cpu);
+static inline u32 get_acpi_id_for_cpu(unsigned int cpu)
+{
+	return	acpi_cpu_get_madt_gicc(cpu)->uid;
+}
+
+static inline void arch_fix_phys_package_id(int num, u32 slot) { }
+void __init acpi_init_cpus(void);
+int apei_claim_sea(struct pt_regs *regs);
+#else
+static inline void acpi_init_cpus(void) { }
+static inline int apei_claim_sea(struct pt_regs *regs) { return -ENOENT; }
+#endif /* CONFIG_ACPI */
+
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+bool acpi_parking_protocol_valid(int cpu);
+void __init
+acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor);
+#else
+static inline bool acpi_parking_protocol_valid(int cpu) { return false; }
+static inline void
+acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor)
+{}
+#endif
+
+static inline const char *acpi_get_enable_method(int cpu)
+{
+	if (acpi_psci_present())
+		return "psci";
+
+	if (acpi_parking_protocol_valid(cpu))
+		return "parking-protocol";
+
+	return NULL;
+}
+
+#ifdef	CONFIG_ACPI_APEI
+/*
+ * acpi_disable_cmcff is used in drivers/acpi/apei/hest.c for disabling
+ * IA-32 Architecture Corrected Machine Check (CMC) Firmware-First mode
+ * with a kernel command line parameter "acpi=nocmcoff". But we don't
+ * have this IA-32 specific feature on ARM64, this definition is only
+ * for compatibility.
+ */
+#define acpi_disable_cmcff 1
+static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr)
+{
+	return __acpi_get_mem_attribute(addr);
+}
+#endif /* CONFIG_ACPI_APEI */
+
+#ifdef CONFIG_ACPI_NUMA
+int arm64_acpi_numa_init(void);
+int acpi_numa_get_nid(unsigned int cpu);
+void acpi_map_cpus_to_nodes(void);
+#else
+static inline int arm64_acpi_numa_init(void) { return -ENOSYS; }
+static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
+static inline void acpi_map_cpus_to_nodes(void) { }
+#endif /* CONFIG_ACPI_NUMA */
+
+#define ACPI_TABLE_UPGRADE_MAX_PHYS MEMBLOCK_ALLOC_ACCESSIBLE
+
+#endif /*_ASM_ACPI_H*/
diff --git a/arch/arm64/include/asm/alternative-macros.h b/arch/arm64/include/asm/alternative-macros.h
new file mode 100644
index 000000000..94b486192
--- /dev/null
+++ b/arch/arm64/include/asm/alternative-macros.h
@@ -0,0 +1,264 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ALTERNATIVE_MACROS_H
+#define __ASM_ALTERNATIVE_MACROS_H
+
+#include <linux/const.h>
+#include <vdso/bits.h>
+
+#include <asm/cpucaps.h>
+#include <asm/insn-def.h>
+
+/*
+ * Binutils 2.27.0 can't handle a 'UL' suffix on constants, so for the assembly
+ * macros below we must use we must use `(1 << ARM64_CB_SHIFT)`.
+ */
+#define ARM64_CB_SHIFT	15
+#define ARM64_CB_BIT	BIT(ARM64_CB_SHIFT)
+
+#if ARM64_NCAPS >= ARM64_CB_BIT
+#error "cpucaps have overflown ARM64_CB_BIT"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/stringify.h>
+
+#define ALTINSTR_ENTRY(cpucap)					              \
+	" .word 661b - .\n"				/* label           */ \
+	" .word 663f - .\n"				/* new instruction */ \
+	" .hword " __stringify(cpucap) "\n"		/* cpucap          */ \
+	" .byte 662b-661b\n"				/* source len      */ \
+	" .byte 664f-663f\n"				/* replacement len */
+
+#define ALTINSTR_ENTRY_CB(cpucap, cb)					      \
+	" .word 661b - .\n"				/* label           */ \
+	" .word " __stringify(cb) "- .\n"		/* callback        */ \
+	" .hword " __stringify(cpucap) "\n"		/* cpucap          */ \
+	" .byte 662b-661b\n"				/* source len      */ \
+	" .byte 664f-663f\n"				/* replacement len */
+
+/*
+ * alternative assembly primitive:
+ *
+ * If any of these .org directive fail, it means that insn1 and insn2
+ * don't have the same length. This used to be written as
+ *
+ * .if ((664b-663b) != (662b-661b))
+ * 	.error "Alternatives instruction length mismatch"
+ * .endif
+ *
+ * but most assemblers die if insn1 or insn2 have a .inst. This should
+ * be fixed in a binutils release posterior to 2.25.51.0.2 (anything
+ * containing commit 4e4d08cf7399b606 or c1baaddf8861).
+ *
+ * Alternatives with callbacks do not generate replacement instructions.
+ */
+#define __ALTERNATIVE_CFG(oldinstr, newinstr, cpucap, cfg_enabled)	\
+	".if "__stringify(cfg_enabled)" == 1\n"				\
+	"661:\n\t"							\
+	oldinstr "\n"							\
+	"662:\n"							\
+	".pushsection .altinstructions,\"a\"\n"				\
+	ALTINSTR_ENTRY(cpucap)						\
+	".popsection\n"							\
+	".subsection 1\n"						\
+	"663:\n\t"							\
+	newinstr "\n"							\
+	"664:\n\t"							\
+	".org	. - (664b-663b) + (662b-661b)\n\t"			\
+	".org	. - (662b-661b) + (664b-663b)\n\t"			\
+	".previous\n"							\
+	".endif\n"
+
+#define __ALTERNATIVE_CFG_CB(oldinstr, cpucap, cfg_enabled, cb)	\
+	".if "__stringify(cfg_enabled)" == 1\n"				\
+	"661:\n\t"							\
+	oldinstr "\n"							\
+	"662:\n"							\
+	".pushsection .altinstructions,\"a\"\n"				\
+	ALTINSTR_ENTRY_CB(cpucap, cb)					\
+	".popsection\n"							\
+	"663:\n\t"							\
+	"664:\n\t"							\
+	".endif\n"
+
+#define _ALTERNATIVE_CFG(oldinstr, newinstr, cpucap, cfg, ...)	\
+	__ALTERNATIVE_CFG(oldinstr, newinstr, cpucap, IS_ENABLED(cfg))
+
+#define ALTERNATIVE_CB(oldinstr, cpucap, cb) \
+	__ALTERNATIVE_CFG_CB(oldinstr, (1 << ARM64_CB_SHIFT) | (cpucap), 1, cb)
+#else
+
+#include <asm/assembler.h>
+
+.macro altinstruction_entry orig_offset alt_offset cpucap orig_len alt_len
+	.word \orig_offset - .
+	.word \alt_offset - .
+	.hword (\cpucap)
+	.byte \orig_len
+	.byte \alt_len
+.endm
+
+.macro alternative_insn insn1, insn2, cap, enable = 1
+	.if \enable
+661:	\insn1
+662:	.pushsection .altinstructions, "a"
+	altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
+	.popsection
+	.subsection 1
+663:	\insn2
+664:	.org	. - (664b-663b) + (662b-661b)
+	.org	. - (662b-661b) + (664b-663b)
+	.previous
+	.endif
+.endm
+
+/*
+ * Alternative sequences
+ *
+ * The code for the case where the capability is not present will be
+ * assembled and linked as normal. There are no restrictions on this
+ * code.
+ *
+ * The code for the case where the capability is present will be
+ * assembled into a special section to be used for dynamic patching.
+ * Code for that case must:
+ *
+ * 1. Be exactly the same length (in bytes) as the default code
+ *    sequence.
+ *
+ * 2. Not contain a branch target that is used outside of the
+ *    alternative sequence it is defined in (branches into an
+ *    alternative sequence are not fixed up).
+ */
+
+/*
+ * Begin an alternative code sequence.
+ */
+.macro alternative_if_not cap
+	.set .Lasm_alt_mode, 0
+	.pushsection .altinstructions, "a"
+	altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f
+	.popsection
+661:
+.endm
+
+.macro alternative_if cap
+	.set .Lasm_alt_mode, 1
+	.pushsection .altinstructions, "a"
+	altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f
+	.popsection
+	.subsection 1
+	.align 2	/* So GAS knows label 661 is suitably aligned */
+661:
+.endm
+
+.macro alternative_cb cap, cb
+	.set .Lasm_alt_mode, 0
+	.pushsection .altinstructions, "a"
+	altinstruction_entry 661f, \cb, (1 << ARM64_CB_SHIFT) | \cap, 662f-661f, 0
+	.popsection
+661:
+.endm
+
+/*
+ * Provide the other half of the alternative code sequence.
+ */
+.macro alternative_else
+662:
+	.if .Lasm_alt_mode==0
+	.subsection 1
+	.else
+	.previous
+	.endif
+663:
+.endm
+
+/*
+ * Complete an alternative code sequence.
+ */
+.macro alternative_endif
+664:
+	.org	. - (664b-663b) + (662b-661b)
+	.org	. - (662b-661b) + (664b-663b)
+	.if .Lasm_alt_mode==0
+	.previous
+	.endif
+.endm
+
+/*
+ * Callback-based alternative epilogue
+ */
+.macro alternative_cb_end
+662:
+.endm
+
+/*
+ * Provides a trivial alternative or default sequence consisting solely
+ * of NOPs. The number of NOPs is chosen automatically to match the
+ * previous case.
+ */
+.macro alternative_else_nop_endif
+alternative_else
+	nops	(662b-661b) / AARCH64_INSN_SIZE
+alternative_endif
+.endm
+
+#define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...)	\
+	alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
+
+#endif  /*  __ASSEMBLY__  */
+
+/*
+ * Usage: asm(ALTERNATIVE(oldinstr, newinstr, cpucap));
+ *
+ * Usage: asm(ALTERNATIVE(oldinstr, newinstr, cpucap, CONFIG_FOO));
+ * N.B. If CONFIG_FOO is specified, but not selected, the whole block
+ *      will be omitted, including oldinstr.
+ */
+#define ALTERNATIVE(oldinstr, newinstr, ...)   \
+	_ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+static __always_inline bool
+alternative_has_cap_likely(const unsigned long cpucap)
+{
+	compiletime_assert(cpucap < ARM64_NCAPS,
+			   "cpucap must be < ARM64_NCAPS");
+
+	asm_volatile_goto(
+	ALTERNATIVE_CB("b	%l[l_no]", %[cpucap], alt_cb_patch_nops)
+	:
+	: [cpucap] "i" (cpucap)
+	:
+	: l_no);
+
+	return true;
+l_no:
+	return false;
+}
+
+static __always_inline bool
+alternative_has_cap_unlikely(const unsigned long cpucap)
+{
+	compiletime_assert(cpucap < ARM64_NCAPS,
+			   "cpucap must be < ARM64_NCAPS");
+
+	asm_volatile_goto(
+	ALTERNATIVE("nop", "b	%l[l_yes]", %[cpucap])
+	:
+	: [cpucap] "i" (cpucap)
+	:
+	: l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ALTERNATIVE_MACROS_H */
diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h
new file mode 100644
index 000000000..00d97b8a7
--- /dev/null
+++ b/arch/arm64/include/asm/alternative.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ALTERNATIVE_H
+#define __ASM_ALTERNATIVE_H
+
+#include <asm/alternative-macros.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/stddef.h>
+
+struct alt_instr {
+	s32 orig_offset;	/* offset to original instruction */
+	s32 alt_offset;		/* offset to replacement instruction */
+	u16 cpucap;		/* cpucap bit set for replacement */
+	u8  orig_len;		/* size of original instruction(s) */
+	u8  alt_len;		/* size of new instruction(s), <= orig_len */
+};
+
+typedef void (*alternative_cb_t)(struct alt_instr *alt,
+				 __le32 *origptr, __le32 *updptr, int nr_inst);
+
+void __init apply_boot_alternatives(void);
+void __init apply_alternatives_all(void);
+bool alternative_is_applied(u16 cpucap);
+
+#ifdef CONFIG_MODULES
+void apply_alternatives_module(void *start, size_t length);
+#else
+static inline void apply_alternatives_module(void *start, size_t length) { }
+#endif
+
+void alt_cb_patch_nops(struct alt_instr *alt, __le32 *origptr,
+		       __le32 *updptr, int nr_inst);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ALTERNATIVE_H */
diff --git a/arch/arm64/include/asm/apple_m1_pmu.h b/arch/arm64/include/asm/apple_m1_pmu.h
new file mode 100644
index 000000000..99483b19b
--- /dev/null
+++ b/arch/arm64/include/asm/apple_m1_pmu.h
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef __ASM_APPLE_M1_PMU_h
+#define __ASM_APPLE_M1_PMU_h
+
+#include <linux/bits.h>
+#include <asm/sysreg.h>
+
+/* Counters */
+#define SYS_IMP_APL_PMC0_EL1	sys_reg(3, 2, 15, 0, 0)
+#define SYS_IMP_APL_PMC1_EL1	sys_reg(3, 2, 15, 1, 0)
+#define SYS_IMP_APL_PMC2_EL1	sys_reg(3, 2, 15, 2, 0)
+#define SYS_IMP_APL_PMC3_EL1	sys_reg(3, 2, 15, 3, 0)
+#define SYS_IMP_APL_PMC4_EL1	sys_reg(3, 2, 15, 4, 0)
+#define SYS_IMP_APL_PMC5_EL1	sys_reg(3, 2, 15, 5, 0)
+#define SYS_IMP_APL_PMC6_EL1	sys_reg(3, 2, 15, 6, 0)
+#define SYS_IMP_APL_PMC7_EL1	sys_reg(3, 2, 15, 7, 0)
+#define SYS_IMP_APL_PMC8_EL1	sys_reg(3, 2, 15, 9, 0)
+#define SYS_IMP_APL_PMC9_EL1	sys_reg(3, 2, 15, 10, 0)
+
+/* Core PMC control register */
+#define SYS_IMP_APL_PMCR0_EL1	sys_reg(3, 1, 15, 0, 0)
+#define PMCR0_CNT_ENABLE_0_7	GENMASK(7, 0)
+#define PMCR0_IMODE		GENMASK(10, 8)
+#define PMCR0_IMODE_OFF		0
+#define PMCR0_IMODE_PMI		1
+#define PMCR0_IMODE_AIC		2
+#define PMCR0_IMODE_HALT	3
+#define PMCR0_IMODE_FIQ		4
+#define PMCR0_IACT		BIT(11)
+#define PMCR0_PMI_ENABLE_0_7	GENMASK(19, 12)
+#define PMCR0_STOP_CNT_ON_PMI	BIT(20)
+#define PMCR0_CNT_GLOB_L2C_EVT	BIT(21)
+#define PMCR0_DEFER_PMI_TO_ERET	BIT(22)
+#define PMCR0_ALLOW_CNT_EN_EL0	BIT(30)
+#define PMCR0_CNT_ENABLE_8_9	GENMASK(33, 32)
+#define PMCR0_PMI_ENABLE_8_9	GENMASK(45, 44)
+
+#define SYS_IMP_APL_PMCR1_EL1	sys_reg(3, 1, 15, 1, 0)
+#define PMCR1_COUNT_A64_EL0_0_7	GENMASK(15, 8)
+#define PMCR1_COUNT_A64_EL1_0_7	GENMASK(23, 16)
+#define PMCR1_COUNT_A64_EL0_8_9	GENMASK(41, 40)
+#define PMCR1_COUNT_A64_EL1_8_9	GENMASK(49, 48)
+
+#define SYS_IMP_APL_PMCR2_EL1	sys_reg(3, 1, 15, 2, 0)
+#define SYS_IMP_APL_PMCR3_EL1	sys_reg(3, 1, 15, 3, 0)
+#define SYS_IMP_APL_PMCR4_EL1	sys_reg(3, 1, 15, 4, 0)
+
+#define SYS_IMP_APL_PMESR0_EL1	sys_reg(3, 1, 15, 5, 0)
+#define PMESR0_EVT_CNT_2	GENMASK(7, 0)
+#define PMESR0_EVT_CNT_3	GENMASK(15, 8)
+#define PMESR0_EVT_CNT_4	GENMASK(23, 16)
+#define PMESR0_EVT_CNT_5	GENMASK(31, 24)
+
+#define SYS_IMP_APL_PMESR1_EL1	sys_reg(3, 1, 15, 6, 0)
+#define PMESR1_EVT_CNT_6	GENMASK(7, 0)
+#define PMESR1_EVT_CNT_7	GENMASK(15, 8)
+#define PMESR1_EVT_CNT_8	GENMASK(23, 16)
+#define PMESR1_EVT_CNT_9	GENMASK(31, 24)
+
+#define SYS_IMP_APL_PMSR_EL1	sys_reg(3, 1, 15, 13, 0)
+#define PMSR_OVERFLOW		GENMASK(9, 0)
+
+#endif /* __ASM_APPLE_M1_PMU_h */
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
new file mode 100644
index 000000000..01281a533
--- /dev/null
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/arch_gicv3.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ */
+#ifndef __ASM_ARCH_GICV3_H
+#define __ASM_ARCH_GICV3_H
+
+#include <asm/sysreg.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqchip/arm-gic-common.h>
+#include <linux/stringify.h>
+#include <asm/barrier.h>
+#include <asm/cacheflush.h>
+
+#define read_gicreg(r)			read_sysreg_s(SYS_ ## r)
+#define write_gicreg(v, r)		write_sysreg_s(v, SYS_ ## r)
+
+/*
+ * Low-level accessors
+ *
+ * These system registers are 32 bits, but we make sure that the compiler
+ * sets the GP register's most significant bits to 0 with an explicit cast.
+ */
+
+static __always_inline void gic_write_dir(u32 irq)
+{
+	write_sysreg_s(irq, SYS_ICC_DIR_EL1);
+	isb();
+}
+
+static inline u64 gic_read_iar_common(void)
+{
+	u64 irqstat;
+
+	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
+	dsb(sy);
+	return irqstat;
+}
+
+/*
+ * Cavium ThunderX erratum 23154
+ *
+ * The gicv3 of ThunderX requires a modified version for reading the
+ * IAR status to ensure data synchronization (access to icc_iar1_el1
+ * is not sync'ed before and after).
+ *
+ * Erratum 38545
+ *
+ * When a IAR register read races with a GIC interrupt RELEASE event,
+ * GIC-CPU interface could wrongly return a valid INTID to the CPU
+ * for an interrupt that is already released(non activated) instead of 0x3ff.
+ *
+ * To workaround this, return a valid interrupt ID only if there is a change
+ * in the active priority list after the IAR read.
+ *
+ * Common function used for both the workarounds since,
+ * 1. On Thunderx 88xx 1.x both erratas are applicable.
+ * 2. Having extra nops doesn't add any side effects for Silicons where
+ *    erratum 23154 is not applicable.
+ */
+static inline u64 gic_read_iar_cavium_thunderx(void)
+{
+	u64 irqstat, apr;
+
+	apr = read_sysreg_s(SYS_ICC_AP1R0_EL1);
+	nops(8);
+	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
+	nops(4);
+	mb();
+
+	/* Max priority groups implemented is only 32 */
+	if (likely(apr != read_sysreg_s(SYS_ICC_AP1R0_EL1)))
+		return irqstat;
+
+	return 0x3ff;
+}
+
+static inline void gic_write_ctlr(u32 val)
+{
+	write_sysreg_s(val, SYS_ICC_CTLR_EL1);
+	isb();
+}
+
+static inline u32 gic_read_ctlr(void)
+{
+	return read_sysreg_s(SYS_ICC_CTLR_EL1);
+}
+
+static inline void gic_write_grpen1(u32 val)
+{
+	write_sysreg_s(val, SYS_ICC_IGRPEN1_EL1);
+	isb();
+}
+
+static inline void gic_write_sgi1r(u64 val)
+{
+	write_sysreg_s(val, SYS_ICC_SGI1R_EL1);
+}
+
+static inline u32 gic_read_sre(void)
+{
+	return read_sysreg_s(SYS_ICC_SRE_EL1);
+}
+
+static inline void gic_write_sre(u32 val)
+{
+	write_sysreg_s(val, SYS_ICC_SRE_EL1);
+	isb();
+}
+
+static inline void gic_write_bpr1(u32 val)
+{
+	write_sysreg_s(val, SYS_ICC_BPR1_EL1);
+}
+
+static inline u32 gic_read_pmr(void)
+{
+	return read_sysreg_s(SYS_ICC_PMR_EL1);
+}
+
+static __always_inline void gic_write_pmr(u32 val)
+{
+	write_sysreg_s(val, SYS_ICC_PMR_EL1);
+}
+
+static inline u32 gic_read_rpr(void)
+{
+	return read_sysreg_s(SYS_ICC_RPR_EL1);
+}
+
+#define gic_read_typer(c)		readq_relaxed(c)
+#define gic_write_irouter(v, c)		writeq_relaxed(v, c)
+#define gic_read_lpir(c)		readq_relaxed(c)
+#define gic_write_lpir(v, c)		writeq_relaxed(v, c)
+
+#define gic_flush_dcache_to_poc(a,l)	\
+	dcache_clean_inval_poc((unsigned long)(a), (unsigned long)(a)+(l))
+
+#define gits_read_baser(c)		readq_relaxed(c)
+#define gits_write_baser(v, c)		writeq_relaxed(v, c)
+
+#define gits_read_cbaser(c)		readq_relaxed(c)
+#define gits_write_cbaser(v, c)		writeq_relaxed(v, c)
+
+#define gits_write_cwriter(v, c)	writeq_relaxed(v, c)
+
+#define gicr_read_propbaser(c)		readq_relaxed(c)
+#define gicr_write_propbaser(v, c)	writeq_relaxed(v, c)
+
+#define gicr_write_pendbaser(v, c)	writeq_relaxed(v, c)
+#define gicr_read_pendbaser(c)		readq_relaxed(c)
+
+#define gicr_write_vpropbaser(v, c)	writeq_relaxed(v, c)
+#define gicr_read_vpropbaser(c)		readq_relaxed(c)
+
+#define gicr_write_vpendbaser(v, c)	writeq_relaxed(v, c)
+#define gicr_read_vpendbaser(c)		readq_relaxed(c)
+
+static inline bool gic_prio_masking_enabled(void)
+{
+	return system_uses_irq_prio_masking();
+}
+
+static inline void gic_pmr_mask_irqs(void)
+{
+	BUILD_BUG_ON(GICD_INT_DEF_PRI < (__GIC_PRIO_IRQOFF |
+					 GIC_PRIO_PSR_I_SET));
+	BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON);
+	/*
+	 * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared
+	 * and non-secure PMR accesses are not subject to the shifts that
+	 * are applied to IRQ priorities
+	 */
+	BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON);
+	/*
+	 * Same situation as above, but now we make sure that we can mask
+	 * regular interrupts.
+	 */
+	BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) < (__GIC_PRIO_IRQOFF_NS |
+							 GIC_PRIO_PSR_I_SET));
+	gic_write_pmr(GIC_PRIO_IRQOFF);
+}
+
+static inline void gic_arch_enable_irqs(void)
+{
+	asm volatile ("msr daifclr, #3" : : : "memory");
+}
+
+static inline bool gic_has_relaxed_pmr_sync(void)
+{
+	return cpus_have_cap(ARM64_HAS_GIC_PRIO_RELAXED_SYNC);
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_GICV3_H */
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
new file mode 100644
index 000000000..934c658ee
--- /dev/null
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/arch_timer.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+#ifndef __ASM_ARCH_TIMER_H
+#define __ASM_ARCH_TIMER_H
+
+#include <asm/barrier.h>
+#include <asm/hwcap.h>
+#include <asm/sysreg.h>
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/jump_label.h>
+#include <linux/smp.h>
+#include <linux/types.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#if IS_ENABLED(CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND)
+#define has_erratum_handler(h)						\
+	({								\
+		const struct arch_timer_erratum_workaround *__wa;	\
+		__wa = __this_cpu_read(timer_unstable_counter_workaround); \
+		(__wa && __wa->h);					\
+	})
+
+#define erratum_handler(h)						\
+	({								\
+		const struct arch_timer_erratum_workaround *__wa;	\
+		__wa = __this_cpu_read(timer_unstable_counter_workaround); \
+		(__wa && __wa->h) ? ({ isb(); __wa->h;}) : arch_timer_##h; \
+	})
+
+#else
+#define has_erratum_handler(h)			   false
+#define erratum_handler(h)			   (arch_timer_##h)
+#endif
+
+enum arch_timer_erratum_match_type {
+	ate_match_dt,
+	ate_match_local_cap_id,
+	ate_match_acpi_oem_info,
+};
+
+struct clock_event_device;
+
+struct arch_timer_erratum_workaround {
+	enum arch_timer_erratum_match_type match_type;
+	const void *id;
+	const char *desc;
+	u64 (*read_cntpct_el0)(void);
+	u64 (*read_cntvct_el0)(void);
+	int (*set_next_event_phys)(unsigned long, struct clock_event_device *);
+	int (*set_next_event_virt)(unsigned long, struct clock_event_device *);
+	bool disable_compat_vdso;
+};
+
+DECLARE_PER_CPU(const struct arch_timer_erratum_workaround *,
+		timer_unstable_counter_workaround);
+
+static inline notrace u64 arch_timer_read_cntpct_el0(void)
+{
+	u64 cnt;
+
+	asm volatile(ALTERNATIVE("isb\n mrs %0, cntpct_el0",
+				 "nop\n" __mrs_s("%0", SYS_CNTPCTSS_EL0),
+				 ARM64_HAS_ECV)
+		     : "=r" (cnt));
+
+	return cnt;
+}
+
+static inline notrace u64 arch_timer_read_cntvct_el0(void)
+{
+	u64 cnt;
+
+	asm volatile(ALTERNATIVE("isb\n mrs %0, cntvct_el0",
+				 "nop\n" __mrs_s("%0", SYS_CNTVCTSS_EL0),
+				 ARM64_HAS_ECV)
+		     : "=r" (cnt));
+
+	return cnt;
+}
+
+#define arch_timer_reg_read_stable(reg)					\
+	({								\
+		erratum_handler(read_ ## reg)();			\
+	})
+
+/*
+ * These register accessors are marked inline so the compiler can
+ * nicely work out which register we want, and chuck away the rest of
+ * the code.
+ */
+static __always_inline
+void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u64 val)
+{
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			write_sysreg(val, cntp_ctl_el0);
+			isb();
+			break;
+		case ARCH_TIMER_REG_CVAL:
+			write_sysreg(val, cntp_cval_el0);
+			break;
+		default:
+			BUILD_BUG();
+		}
+	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			write_sysreg(val, cntv_ctl_el0);
+			isb();
+			break;
+		case ARCH_TIMER_REG_CVAL:
+			write_sysreg(val, cntv_cval_el0);
+			break;
+		default:
+			BUILD_BUG();
+		}
+	} else {
+		BUILD_BUG();
+	}
+}
+
+static __always_inline
+u64 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg)
+{
+	if (access == ARCH_TIMER_PHYS_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			return read_sysreg(cntp_ctl_el0);
+		default:
+			BUILD_BUG();
+		}
+	} else if (access == ARCH_TIMER_VIRT_ACCESS) {
+		switch (reg) {
+		case ARCH_TIMER_REG_CTRL:
+			return read_sysreg(cntv_ctl_el0);
+		default:
+			BUILD_BUG();
+		}
+	}
+
+	BUILD_BUG();
+	unreachable();
+}
+
+static inline u32 arch_timer_get_cntfrq(void)
+{
+	return read_sysreg(cntfrq_el0);
+}
+
+static inline u32 arch_timer_get_cntkctl(void)
+{
+	return read_sysreg(cntkctl_el1);
+}
+
+static inline void arch_timer_set_cntkctl(u32 cntkctl)
+{
+	write_sysreg(cntkctl, cntkctl_el1);
+	isb();
+}
+
+static __always_inline u64 __arch_counter_get_cntpct_stable(void)
+{
+	u64 cnt;
+
+	cnt = arch_timer_reg_read_stable(cntpct_el0);
+	arch_counter_enforce_ordering(cnt);
+	return cnt;
+}
+
+static __always_inline u64 __arch_counter_get_cntpct(void)
+{
+	u64 cnt;
+
+	asm volatile(ALTERNATIVE("isb\n mrs %0, cntpct_el0",
+				 "nop\n" __mrs_s("%0", SYS_CNTPCTSS_EL0),
+				 ARM64_HAS_ECV)
+		     : "=r" (cnt));
+	arch_counter_enforce_ordering(cnt);
+	return cnt;
+}
+
+static __always_inline u64 __arch_counter_get_cntvct_stable(void)
+{
+	u64 cnt;
+
+	cnt = arch_timer_reg_read_stable(cntvct_el0);
+	arch_counter_enforce_ordering(cnt);
+	return cnt;
+}
+
+static __always_inline u64 __arch_counter_get_cntvct(void)
+{
+	u64 cnt;
+
+	asm volatile(ALTERNATIVE("isb\n mrs %0, cntvct_el0",
+				 "nop\n" __mrs_s("%0", SYS_CNTVCTSS_EL0),
+				 ARM64_HAS_ECV)
+		     : "=r" (cnt));
+	arch_counter_enforce_ordering(cnt);
+	return cnt;
+}
+
+static inline int arch_timer_arch_init(void)
+{
+	return 0;
+}
+
+static inline void arch_timer_set_evtstrm_feature(void)
+{
+	cpu_set_named_feature(EVTSTRM);
+#ifdef CONFIG_COMPAT
+	compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
+#endif
+}
+
+static inline bool arch_timer_have_evtstrm_feature(void)
+{
+	return cpu_have_named_feature(EVTSTRM);
+}
+#endif
diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h
new file mode 100644
index 000000000..b0abc64f8
--- /dev/null
+++ b/arch/arm64/include/asm/archrandom.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARCHRANDOM_H
+#define _ASM_ARCHRANDOM_H
+
+#include <linux/arm-smccc.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+#include <asm/cpufeature.h>
+
+#define ARM_SMCCC_TRNG_MIN_VERSION	0x10000UL
+
+extern bool smccc_trng_available;
+
+static inline bool __init smccc_probe_trng(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_VERSION, &res);
+	if ((s32)res.a0 < 0)
+		return false;
+
+	return res.a0 >= ARM_SMCCC_TRNG_MIN_VERSION;
+}
+
+static inline bool __arm64_rndr(unsigned long *v)
+{
+	bool ok;
+
+	/*
+	 * Reads of RNDR set PSTATE.NZCV to 0b0000 on success,
+	 * and set PSTATE.NZCV to 0b0100 otherwise.
+	 */
+	asm volatile(
+		__mrs_s("%0", SYS_RNDR_EL0) "\n"
+	"	cset %w1, ne\n"
+	: "=r" (*v), "=r" (ok)
+	:
+	: "cc");
+
+	return ok;
+}
+
+static inline bool __arm64_rndrrs(unsigned long *v)
+{
+	bool ok;
+
+	/*
+	 * Reads of RNDRRS set PSTATE.NZCV to 0b0000 on success,
+	 * and set PSTATE.NZCV to 0b0100 otherwise.
+	 */
+	asm volatile(
+		__mrs_s("%0", SYS_RNDRRS_EL0) "\n"
+	"	cset %w1, ne\n"
+	: "=r" (*v), "=r" (ok)
+	:
+	: "cc");
+
+	return ok;
+}
+
+static __always_inline bool __cpu_has_rng(void)
+{
+	if (unlikely(!system_capabilities_finalized() && !preemptible()))
+		return this_cpu_has_cap(ARM64_HAS_RNG);
+	return cpus_have_const_cap(ARM64_HAS_RNG);
+}
+
+static inline size_t __must_check arch_get_random_longs(unsigned long *v, size_t max_longs)
+{
+	/*
+	 * Only support the generic interface after we have detected
+	 * the system wide capability, avoiding complexity with the
+	 * cpufeature code and with potential scheduling between CPUs
+	 * with and without the feature.
+	 */
+	if (max_longs && __cpu_has_rng() && __arm64_rndr(v))
+		return 1;
+	return 0;
+}
+
+static inline size_t __must_check arch_get_random_seed_longs(unsigned long *v, size_t max_longs)
+{
+	if (!max_longs)
+		return 0;
+
+	/*
+	 * We prefer the SMCCC call, since its semantics (return actual
+	 * hardware backed entropy) is closer to the idea behind this
+	 * function here than what even the RNDRSS register provides
+	 * (the output of a pseudo RNG freshly seeded by a TRNG).
+	 */
+	if (smccc_trng_available) {
+		struct arm_smccc_res res;
+
+		max_longs = min_t(size_t, 3, max_longs);
+		arm_smccc_1_1_invoke(ARM_SMCCC_TRNG_RND64, max_longs * 64, &res);
+		if ((int)res.a0 >= 0) {
+			switch (max_longs) {
+			case 3:
+				*v++ = res.a1;
+				fallthrough;
+			case 2:
+				*v++ = res.a2;
+				fallthrough;
+			case 1:
+				*v++ = res.a3;
+				break;
+			}
+			return max_longs;
+		}
+	}
+
+	/*
+	 * RNDRRS is not backed by an entropy source but by a DRBG that is
+	 * reseeded after each invocation. This is not a 100% fit but good
+	 * enough to implement this API if no other entropy source exists.
+	 */
+	if (__cpu_has_rng() && __arm64_rndrrs(v))
+		return 1;
+
+	return 0;
+}
+
+static inline bool __init __early_cpu_has_rndr(void)
+{
+	/* Open code as we run prior to the first call to cpufeature. */
+	unsigned long ftr = read_sysreg_s(SYS_ID_AA64ISAR0_EL1);
+	return (ftr >> ID_AA64ISAR0_EL1_RNDR_SHIFT) & 0xf;
+}
+
+u64 kaslr_early_init(void *fdt);
+
+#endif /* _ASM_ARCHRANDOM_H */
diff --git a/arch/arm64/include/asm/arm-cci.h b/arch/arm64/include/asm/arm-cci.h
new file mode 100644
index 000000000..6d4abbd0c
--- /dev/null
+++ b/arch/arm64/include/asm/arm-cci.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/arm-cci.h
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ */
+
+#ifndef __ASM_ARM_CCI_H
+#define __ASM_ARM_CCI_H
+
+static inline bool platform_has_secure_cci_access(void)
+{
+	return false;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/arm_dsu_pmu.h b/arch/arm64/include/asm/arm_dsu_pmu.h
new file mode 100644
index 000000000..16cdedd5f
--- /dev/null
+++ b/arch/arm64/include/asm/arm_dsu_pmu.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ARM DynamIQ Shared Unit (DSU) PMU Low level register access routines.
+ *
+ * Copyright (C) ARM Limited, 2017.
+ *
+ * Author: Suzuki K Poulose <suzuki.poulose@arm.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/build_bug.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/barrier.h>
+#include <asm/sysreg.h>
+
+
+#define CLUSTERPMCR_EL1			sys_reg(3, 0, 15, 5, 0)
+#define CLUSTERPMCNTENSET_EL1		sys_reg(3, 0, 15, 5, 1)
+#define CLUSTERPMCNTENCLR_EL1		sys_reg(3, 0, 15, 5, 2)
+#define CLUSTERPMOVSSET_EL1		sys_reg(3, 0, 15, 5, 3)
+#define CLUSTERPMOVSCLR_EL1		sys_reg(3, 0, 15, 5, 4)
+#define CLUSTERPMSELR_EL1		sys_reg(3, 0, 15, 5, 5)
+#define CLUSTERPMINTENSET_EL1		sys_reg(3, 0, 15, 5, 6)
+#define CLUSTERPMINTENCLR_EL1		sys_reg(3, 0, 15, 5, 7)
+#define CLUSTERPMCCNTR_EL1		sys_reg(3, 0, 15, 6, 0)
+#define CLUSTERPMXEVTYPER_EL1		sys_reg(3, 0, 15, 6, 1)
+#define CLUSTERPMXEVCNTR_EL1		sys_reg(3, 0, 15, 6, 2)
+#define CLUSTERPMMDCR_EL1		sys_reg(3, 0, 15, 6, 3)
+#define CLUSTERPMCEID0_EL1		sys_reg(3, 0, 15, 6, 4)
+#define CLUSTERPMCEID1_EL1		sys_reg(3, 0, 15, 6, 5)
+
+static inline u32 __dsu_pmu_read_pmcr(void)
+{
+	return read_sysreg_s(CLUSTERPMCR_EL1);
+}
+
+static inline void __dsu_pmu_write_pmcr(u32 val)
+{
+	write_sysreg_s(val, CLUSTERPMCR_EL1);
+	isb();
+}
+
+static inline u32 __dsu_pmu_get_reset_overflow(void)
+{
+	u32 val = read_sysreg_s(CLUSTERPMOVSCLR_EL1);
+	/* Clear the bit */
+	write_sysreg_s(val, CLUSTERPMOVSCLR_EL1);
+	isb();
+	return val;
+}
+
+static inline void __dsu_pmu_select_counter(int counter)
+{
+	write_sysreg_s(counter, CLUSTERPMSELR_EL1);
+	isb();
+}
+
+static inline u64 __dsu_pmu_read_counter(int counter)
+{
+	__dsu_pmu_select_counter(counter);
+	return read_sysreg_s(CLUSTERPMXEVCNTR_EL1);
+}
+
+static inline void __dsu_pmu_write_counter(int counter, u64 val)
+{
+	__dsu_pmu_select_counter(counter);
+	write_sysreg_s(val, CLUSTERPMXEVCNTR_EL1);
+	isb();
+}
+
+static inline void __dsu_pmu_set_event(int counter, u32 event)
+{
+	__dsu_pmu_select_counter(counter);
+	write_sysreg_s(event, CLUSTERPMXEVTYPER_EL1);
+	isb();
+}
+
+static inline u64 __dsu_pmu_read_pmccntr(void)
+{
+	return read_sysreg_s(CLUSTERPMCCNTR_EL1);
+}
+
+static inline void __dsu_pmu_write_pmccntr(u64 val)
+{
+	write_sysreg_s(val, CLUSTERPMCCNTR_EL1);
+	isb();
+}
+
+static inline void __dsu_pmu_disable_counter(int counter)
+{
+	write_sysreg_s(BIT(counter), CLUSTERPMCNTENCLR_EL1);
+	isb();
+}
+
+static inline void __dsu_pmu_enable_counter(int counter)
+{
+	write_sysreg_s(BIT(counter), CLUSTERPMCNTENSET_EL1);
+	isb();
+}
+
+static inline void __dsu_pmu_counter_interrupt_enable(int counter)
+{
+	write_sysreg_s(BIT(counter), CLUSTERPMINTENSET_EL1);
+	isb();
+}
+
+static inline void __dsu_pmu_counter_interrupt_disable(int counter)
+{
+	write_sysreg_s(BIT(counter), CLUSTERPMINTENCLR_EL1);
+	isb();
+}
+
+
+static inline u32 __dsu_pmu_read_pmceid(int n)
+{
+	switch (n) {
+	case 0:
+		return read_sysreg_s(CLUSTERPMCEID0_EL1);
+	case 1:
+		return read_sysreg_s(CLUSTERPMCEID1_EL1);
+	default:
+		BUILD_BUG();
+		return 0;
+	}
+}
diff --git a/arch/arm64/include/asm/arm_pmuv3.h b/arch/arm64/include/asm/arm_pmuv3.h
new file mode 100644
index 000000000..c27404fa4
--- /dev/null
+++ b/arch/arm64/include/asm/arm_pmuv3.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_PMUV3_H
+#define __ASM_PMUV3_H
+
+#include <linux/kvm_host.h>
+
+#include <asm/cpufeature.h>
+#include <asm/sysreg.h>
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(pmevcntr##n##_el0)
+static inline unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, pmevcntr##n##_el0)
+static inline void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+}
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, pmevtyper##n##_el0)
+static inline void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+}
+
+static inline unsigned long read_pmmir(void)
+{
+	return read_cpuid(PMMIR_EL1);
+}
+
+static inline u32 read_pmuver(void)
+{
+	u64 dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	return cpuid_feature_extract_unsigned_field(dfr0,
+			ID_AA64DFR0_EL1_PMUVer_SHIFT);
+}
+
+static inline void write_pmcr(u64 val)
+{
+	write_sysreg(val, pmcr_el0);
+}
+
+static inline u64 read_pmcr(void)
+{
+	return read_sysreg(pmcr_el0);
+}
+
+static inline void write_pmselr(u32 val)
+{
+	write_sysreg(val, pmselr_el0);
+}
+
+static inline void write_pmccntr(u64 val)
+{
+	write_sysreg(val, pmccntr_el0);
+}
+
+static inline u64 read_pmccntr(void)
+{
+	return read_sysreg(pmccntr_el0);
+}
+
+static inline void write_pmcntenset(u32 val)
+{
+	write_sysreg(val, pmcntenset_el0);
+}
+
+static inline void write_pmcntenclr(u32 val)
+{
+	write_sysreg(val, pmcntenclr_el0);
+}
+
+static inline void write_pmintenset(u32 val)
+{
+	write_sysreg(val, pmintenset_el1);
+}
+
+static inline void write_pmintenclr(u32 val)
+{
+	write_sysreg(val, pmintenclr_el1);
+}
+
+static inline void write_pmccfiltr(u64 val)
+{
+	write_sysreg(val, pmccfiltr_el0);
+}
+
+static inline void write_pmovsclr(u32 val)
+{
+	write_sysreg(val, pmovsclr_el0);
+}
+
+static inline u32 read_pmovsclr(void)
+{
+	return read_sysreg(pmovsclr_el0);
+}
+
+static inline void write_pmuserenr(u32 val)
+{
+	write_sysreg(val, pmuserenr_el0);
+}
+
+static inline u64 read_pmceid0(void)
+{
+	return read_sysreg(pmceid0_el0);
+}
+
+static inline u64 read_pmceid1(void)
+{
+	return read_sysreg(pmceid1_el0);
+}
+
+static inline bool pmuv3_implemented(int pmuver)
+{
+	return !(pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF ||
+		 pmuver == ID_AA64DFR0_EL1_PMUVer_NI);
+}
+
+static inline bool is_pmuv3p4(int pmuver)
+{
+	return pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P4;
+}
+
+static inline bool is_pmuv3p5(int pmuver)
+{
+	return pmuver >= ID_AA64DFR0_EL1_PMUVer_V3P5;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/asm-bug.h b/arch/arm64/include/asm/asm-bug.h
new file mode 100644
index 000000000..c762038ba
--- /dev/null
+++ b/arch/arm64/include/asm/asm-bug.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_ASM_BUG_H
+/*
+ * Copyright (C) 2017  ARM Limited
+ */
+#define __ASM_ASM_BUG_H
+
+#include <asm/brk-imm.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _BUGVERBOSE_LOCATION(file, line) __BUGVERBOSE_LOCATION(file, line)
+#define __BUGVERBOSE_LOCATION(file, line)			\
+		.pushsection .rodata.str,"aMS",@progbits,1;	\
+	14472:	.string file;					\
+		.popsection;					\
+								\
+		.long 14472b - .;				\
+		.short line;
+#else
+#define _BUGVERBOSE_LOCATION(file, line)
+#endif
+
+#ifdef CONFIG_GENERIC_BUG
+
+#define __BUG_ENTRY(flags) 				\
+		.pushsection __bug_table,"aw";		\
+		.align 2;				\
+	14470:	.long 14471f - .;			\
+_BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\
+		.short flags; 				\
+		.popsection;				\
+	14471:
+#else
+#define __BUG_ENTRY(flags)
+#endif
+
+#define ASM_BUG_FLAGS(flags)				\
+	__BUG_ENTRY(flags)				\
+	brk	BUG_BRK_IMM
+
+#define ASM_BUG()	ASM_BUG_FLAGS(0)
+
+#endif /* __ASM_ASM_BUG_H */
diff --git a/arch/arm64/include/asm/asm-extable.h b/arch/arm64/include/asm/asm-extable.h
new file mode 100644
index 000000000..980d1dd8e
--- /dev/null
+++ b/arch/arm64/include/asm/asm-extable.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_ASM_EXTABLE_H
+#define __ASM_ASM_EXTABLE_H
+
+#include <linux/bits.h>
+#include <asm/gpr-num.h>
+
+#define EX_TYPE_NONE			0
+#define EX_TYPE_BPF			1
+#define EX_TYPE_UACCESS_ERR_ZERO	2
+#define EX_TYPE_KACCESS_ERR_ZERO	3
+#define EX_TYPE_LOAD_UNALIGNED_ZEROPAD	4
+
+/* Data fields for EX_TYPE_UACCESS_ERR_ZERO */
+#define EX_DATA_REG_ERR_SHIFT	0
+#define EX_DATA_REG_ERR		GENMASK(4, 0)
+#define EX_DATA_REG_ZERO_SHIFT	5
+#define EX_DATA_REG_ZERO	GENMASK(9, 5)
+
+/* Data fields for EX_TYPE_LOAD_UNALIGNED_ZEROPAD */
+#define EX_DATA_REG_DATA_SHIFT	0
+#define EX_DATA_REG_DATA	GENMASK(4, 0)
+#define EX_DATA_REG_ADDR_SHIFT	5
+#define EX_DATA_REG_ADDR	GENMASK(9, 5)
+
+#ifdef __ASSEMBLY__
+
+#define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
+	.pushsection	__ex_table, "a";		\
+	.align		2;				\
+	.long		((insn) - .);			\
+	.long		((fixup) - .);			\
+	.short		(type);				\
+	.short		(data);				\
+	.popsection;
+
+#define EX_DATA_REG(reg, gpr)	\
+	(.L__gpr_num_##gpr << EX_DATA_REG_##reg##_SHIFT)
+
+#define _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)		\
+	__ASM_EXTABLE_RAW(insn, fixup, 					\
+			  EX_TYPE_UACCESS_ERR_ZERO,			\
+			  (						\
+			    EX_DATA_REG(ERR, err) |			\
+			    EX_DATA_REG(ZERO, zero)			\
+			  ))
+
+#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
+	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, wzr)
+
+#define _ASM_EXTABLE_UACCESS(insn, fixup)				\
+	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, wzr, wzr)
+
+/*
+ * Create an exception table entry for uaccess `insn`, which will branch to `fixup`
+ * when an unhandled fault is taken.
+ */
+	.macro          _asm_extable_uaccess, insn, fixup
+	_ASM_EXTABLE_UACCESS(\insn, \fixup)
+	.endm
+
+/*
+ * Create an exception table entry for `insn` if `fixup` is provided. Otherwise
+ * do nothing.
+ */
+	.macro		_cond_uaccess_extable, insn, fixup
+	.ifnc			\fixup,
+	_asm_extable_uaccess	\insn, \fixup
+	.endif
+	.endm
+
+#else /* __ASSEMBLY__ */
+
+#include <linux/stringify.h>
+
+#define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
+	".pushsection	__ex_table, \"a\"\n"		\
+	".align		2\n"				\
+	".long		((" insn ") - .)\n"		\
+	".long		((" fixup ") - .)\n"		\
+	".short		(" type ")\n"			\
+	".short		(" data ")\n"			\
+	".popsection\n"
+
+#define EX_DATA_REG(reg, gpr)						\
+	"((.L__gpr_num_" #gpr ") << " __stringify(EX_DATA_REG_##reg##_SHIFT) ")"
+
+#define _ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, zero)		\
+	__DEFINE_ASM_GPR_NUMS						\
+	__ASM_EXTABLE_RAW(#insn, #fixup, 				\
+			  __stringify(EX_TYPE_UACCESS_ERR_ZERO),	\
+			  "("						\
+			    EX_DATA_REG(ERR, err) " | "			\
+			    EX_DATA_REG(ZERO, zero)			\
+			  ")")
+
+#define _ASM_EXTABLE_KACCESS_ERR_ZERO(insn, fixup, err, zero)		\
+	__DEFINE_ASM_GPR_NUMS						\
+	__ASM_EXTABLE_RAW(#insn, #fixup, 				\
+			  __stringify(EX_TYPE_KACCESS_ERR_ZERO),	\
+			  "("						\
+			    EX_DATA_REG(ERR, err) " | "			\
+			    EX_DATA_REG(ZERO, zero)			\
+			  ")")
+
+#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)			\
+	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, err, wzr)
+
+#define _ASM_EXTABLE_UACCESS(insn, fixup)				\
+	_ASM_EXTABLE_UACCESS_ERR_ZERO(insn, fixup, wzr, wzr)
+
+#define _ASM_EXTABLE_KACCESS_ERR(insn, fixup, err)			\
+	_ASM_EXTABLE_KACCESS_ERR_ZERO(insn, fixup, err, wzr)
+
+#define _ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(insn, fixup, data, addr)		\
+	__DEFINE_ASM_GPR_NUMS							\
+	__ASM_EXTABLE_RAW(#insn, #fixup,					\
+			  __stringify(EX_TYPE_LOAD_UNALIGNED_ZEROPAD),		\
+			  "("							\
+			    EX_DATA_REG(DATA, data) " | "			\
+			    EX_DATA_REG(ADDR, addr)				\
+			  ")")
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ASM_EXTABLE_H */
diff --git a/arch/arm64/include/asm/asm-offsets.h b/arch/arm64/include/asm/asm-offsets.h
new file mode 100644
index 000000000..d370ee36a
--- /dev/null
+++ b/arch/arm64/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/arm64/include/asm/asm-prototypes.h b/arch/arm64/include/asm/asm-prototypes.h
new file mode 100644
index 000000000..ec1d9655f
--- /dev/null
+++ b/arch/arm64/include/asm/asm-prototypes.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_PROTOTYPES_H
+#define __ASM_PROTOTYPES_H
+/*
+ * CONFIG_MODVERSIONS requires a C declaration to generate the appropriate CRC
+ * for each symbol. Since commit:
+ *
+ *   4efca4ed05cbdfd1 ("kbuild: modversions for EXPORT_SYMBOL() for asm")
+ *
+ * ... kbuild will automatically pick these up from <asm/asm-prototypes.h> and
+ * feed this to genksyms when building assembly files.
+ */
+#include <linux/arm-smccc.h>
+
+#include <asm/ftrace.h>
+#include <asm/page.h>
+#include <asm/string.h>
+#include <asm/uaccess.h>
+
+#include <asm-generic/asm-prototypes.h>
+
+long long __ashlti3(long long a, int b);
+long long __ashrti3(long long a, int b);
+long long __lshrti3(long long a, int b);
+
+/*
+ * This function uses a custom calling convention and cannot be called from C so
+ * this prototype is not entirely accurate.
+ */
+void __hwasan_tag_mismatch(unsigned long addr, unsigned long access_info);
+
+#endif /* __ASM_PROTOTYPES_H */
diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
new file mode 100644
index 000000000..5b6efe8ab
--- /dev/null
+++ b/arch/arm64/include/asm/asm-uaccess.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ASM_UACCESS_H
+#define __ASM_ASM_UACCESS_H
+
+#include <asm/alternative-macros.h>
+#include <asm/asm-extable.h>
+#include <asm/assembler.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/mmu.h>
+#include <asm/sysreg.h>
+
+/*
+ * User access enabling/disabling macros.
+ */
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+	.macro	__uaccess_ttbr0_disable, tmp1
+	mrs	\tmp1, ttbr1_el1			// swapper_pg_dir
+	bic	\tmp1, \tmp1, #TTBR_ASID_MASK
+	sub	\tmp1, \tmp1, #RESERVED_SWAPPER_OFFSET	// reserved_pg_dir
+	msr	ttbr0_el1, \tmp1			// set reserved TTBR0_EL1
+	add	\tmp1, \tmp1, #RESERVED_SWAPPER_OFFSET
+	msr	ttbr1_el1, \tmp1		// set reserved ASID
+	isb
+	.endm
+
+	.macro	__uaccess_ttbr0_enable, tmp1, tmp2
+	get_current_task \tmp1
+	ldr	\tmp1, [\tmp1, #TSK_TI_TTBR0]	// load saved TTBR0_EL1
+	mrs	\tmp2, ttbr1_el1
+	extr    \tmp2, \tmp2, \tmp1, #48
+	ror     \tmp2, \tmp2, #16
+	msr	ttbr1_el1, \tmp2		// set the active ASID
+	msr	ttbr0_el1, \tmp1		// set the non-PAN TTBR0_EL1
+	isb
+	.endm
+
+	.macro	uaccess_ttbr0_disable, tmp1, tmp2
+alternative_if_not ARM64_HAS_PAN
+	save_and_disable_irq \tmp2		// avoid preemption
+	__uaccess_ttbr0_disable \tmp1
+	restore_irq \tmp2
+alternative_else_nop_endif
+	.endm
+
+	.macro	uaccess_ttbr0_enable, tmp1, tmp2, tmp3
+alternative_if_not ARM64_HAS_PAN
+	save_and_disable_irq \tmp3		// avoid preemption
+	__uaccess_ttbr0_enable \tmp1, \tmp2
+	restore_irq \tmp3
+alternative_else_nop_endif
+	.endm
+#else
+	.macro	uaccess_ttbr0_disable, tmp1, tmp2
+	.endm
+
+	.macro	uaccess_ttbr0_enable, tmp1, tmp2, tmp3
+	.endm
+#endif
+
+#define USER(l, x...)				\
+9999:	x;					\
+	_asm_extable_uaccess	9999b, l
+
+/*
+ * Generate the assembly for LDTR/STTR with exception table entries.
+ * This is complicated as there is no post-increment or pair versions of the
+ * unprivileged instructions, and USER() only works for single instructions.
+ */
+	.macro user_ldp l, reg1, reg2, addr, post_inc
+8888:		ldtr	\reg1, [\addr];
+8889:		ldtr	\reg2, [\addr, #8];
+		add	\addr, \addr, \post_inc;
+
+		_asm_extable_uaccess	8888b, \l;
+		_asm_extable_uaccess	8889b, \l;
+	.endm
+
+	.macro user_stp l, reg1, reg2, addr, post_inc
+8888:		sttr	\reg1, [\addr];
+8889:		sttr	\reg2, [\addr, #8];
+		add	\addr, \addr, \post_inc;
+
+		_asm_extable_uaccess	8888b,\l;
+		_asm_extable_uaccess	8889b,\l;
+	.endm
+
+	.macro user_ldst l, inst, reg, addr, post_inc
+8888:		\inst		\reg, [\addr];
+		add		\addr, \addr, \post_inc;
+
+		_asm_extable_uaccess	8888b, \l;
+	.endm
+#endif
diff --git a/arch/arm64/include/asm/asm_pointer_auth.h b/arch/arm64/include/asm/asm_pointer_auth.h
new file mode 100644
index 000000000..13ecc7985
--- /dev/null
+++ b/arch/arm64/include/asm/asm_pointer_auth.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ASM_POINTER_AUTH_H
+#define __ASM_ASM_POINTER_AUTH_H
+
+#include <asm/alternative.h>
+#include <asm/asm-offsets.h>
+#include <asm/cpufeature.h>
+#include <asm/sysreg.h>
+
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+
+	.macro __ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+	mov	\tmp1, #THREAD_KEYS_KERNEL
+	add	\tmp1, \tsk, \tmp1
+	ldp	\tmp2, \tmp3, [\tmp1, #PTRAUTH_KERNEL_KEY_APIA]
+	msr_s	SYS_APIAKEYLO_EL1, \tmp2
+	msr_s	SYS_APIAKEYHI_EL1, \tmp3
+	.endm
+
+	.macro ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+alternative_else_nop_endif
+	.endm
+
+	.macro ptrauth_keys_install_kernel tsk, tmp1, tmp2, tmp3
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+	isb
+alternative_else_nop_endif
+	.endm
+
+#else /* CONFIG_ARM64_PTR_AUTH_KERNEL */
+
+	.macro __ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+	.endm
+
+	.macro ptrauth_keys_install_kernel_nosync tsk, tmp1, tmp2, tmp3
+	.endm
+
+	.macro ptrauth_keys_install_kernel tsk, tmp1, tmp2, tmp3
+	.endm
+
+#endif /* CONFIG_ARM64_PTR_AUTH_KERNEL */
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+/*
+ * thread.keys_user.ap* as offset exceeds the #imm offset range
+ * so use the base value of ldp as thread.keys_user and offset as
+ * thread.keys_user.ap*.
+ */
+	.macro __ptrauth_keys_install_user tsk, tmp1, tmp2, tmp3
+	mov	\tmp1, #THREAD_KEYS_USER
+	add	\tmp1, \tsk, \tmp1
+	ldp	\tmp2, \tmp3, [\tmp1, #PTRAUTH_USER_KEY_APIA]
+	msr_s	SYS_APIAKEYLO_EL1, \tmp2
+	msr_s	SYS_APIAKEYHI_EL1, \tmp3
+	.endm
+
+	.macro __ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+	mrs	\tmp1, id_aa64isar1_el1
+	ubfx	\tmp1, \tmp1, #ID_AA64ISAR1_EL1_APA_SHIFT, #8
+	mrs_s	\tmp2, SYS_ID_AA64ISAR2_EL1
+	ubfx	\tmp2, \tmp2, #ID_AA64ISAR2_EL1_APA3_SHIFT, #4
+	orr	\tmp1, \tmp1, \tmp2
+	cbz	\tmp1, .Lno_addr_auth\@
+	mov_q	\tmp1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
+			SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)
+	mrs	\tmp2, sctlr_el1
+	orr	\tmp2, \tmp2, \tmp1
+	msr	sctlr_el1, \tmp2
+	__ptrauth_keys_install_kernel_nosync \tsk, \tmp1, \tmp2, \tmp3
+	isb
+.Lno_addr_auth\@:
+	.endm
+
+	.macro ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+	b	.Lno_addr_auth\@
+alternative_else_nop_endif
+	__ptrauth_keys_init_cpu \tsk, \tmp1, \tmp2, \tmp3
+.Lno_addr_auth\@:
+	.endm
+
+#else /* !CONFIG_ARM64_PTR_AUTH */
+
+	.macro ptrauth_keys_install_user tsk, tmp1, tmp2, tmp3
+	.endm
+
+#endif /* CONFIG_ARM64_PTR_AUTH */
+
+#endif /* __ASM_ASM_POINTER_AUTH_H */
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
new file mode 100644
index 000000000..376a980f2
--- /dev/null
+++ b/arch/arm64/include/asm/assembler.h
@@ -0,0 +1,897 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/assembler.h, arch/arm/mm/proc-macros.S
+ *
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#ifndef __ASM_ASSEMBLER_H
+#define __ASM_ASSEMBLER_H
+
+#include <asm-generic/export.h>
+
+#include <asm/alternative.h>
+#include <asm/asm-bug.h>
+#include <asm/asm-extable.h>
+#include <asm/asm-offsets.h>
+#include <asm/cpufeature.h>
+#include <asm/cputype.h>
+#include <asm/debug-monitors.h>
+#include <asm/page.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/ptrace.h>
+#include <asm/thread_info.h>
+
+	/*
+	 * Provide a wxN alias for each wN register so what we can paste a xN
+	 * reference after a 'w' to obtain the 32-bit version.
+	 */
+	.irp	n,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30
+	wx\n	.req	w\n
+	.endr
+
+	.macro disable_daif
+	msr	daifset, #0xf
+	.endm
+
+	.macro enable_daif
+	msr	daifclr, #0xf
+	.endm
+
+/*
+ * Save/restore interrupts.
+ */
+	.macro	save_and_disable_irq, flags
+	mrs	\flags, daif
+	msr	daifset, #3
+	.endm
+
+	.macro	restore_irq, flags
+	msr	daif, \flags
+	.endm
+
+	.macro	enable_dbg
+	msr	daifclr, #8
+	.endm
+
+	.macro	disable_step_tsk, flgs, tmp
+	tbz	\flgs, #TIF_SINGLESTEP, 9990f
+	mrs	\tmp, mdscr_el1
+	bic	\tmp, \tmp, #DBG_MDSCR_SS
+	msr	mdscr_el1, \tmp
+	isb	// Synchronise with enable_dbg
+9990:
+	.endm
+
+	/* call with daif masked */
+	.macro	enable_step_tsk, flgs, tmp
+	tbz	\flgs, #TIF_SINGLESTEP, 9990f
+	mrs	\tmp, mdscr_el1
+	orr	\tmp, \tmp, #DBG_MDSCR_SS
+	msr	mdscr_el1, \tmp
+9990:
+	.endm
+
+/*
+ * RAS Error Synchronization barrier
+ */
+	.macro  esb
+#ifdef CONFIG_ARM64_RAS_EXTN
+	hint    #16
+#else
+	nop
+#endif
+	.endm
+
+/*
+ * Value prediction barrier
+ */
+	.macro	csdb
+	hint	#20
+	.endm
+
+/*
+ * Clear Branch History instruction
+ */
+	.macro clearbhb
+	hint	#22
+	.endm
+
+/*
+ * Speculation barrier
+ */
+	.macro	sb
+alternative_if_not ARM64_HAS_SB
+	dsb	nsh
+	isb
+alternative_else
+	SB_BARRIER_INSN
+	nop
+alternative_endif
+	.endm
+
+/*
+ * NOP sequence
+ */
+	.macro	nops, num
+	.rept	\num
+	nop
+	.endr
+	.endm
+
+/*
+ * Register aliases.
+ */
+lr	.req	x30		// link register
+
+/*
+ * Vector entry
+ */
+	 .macro	ventry	label
+	.align	7
+	b	\label
+	.endm
+
+/*
+ * Select code when configured for BE.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CPU_BE(code...) code
+#else
+#define CPU_BE(code...)
+#endif
+
+/*
+ * Select code when configured for LE.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CPU_LE(code...)
+#else
+#define CPU_LE(code...) code
+#endif
+
+/*
+ * Define a macro that constructs a 64-bit value by concatenating two
+ * 32-bit registers. Note that on big endian systems the order of the
+ * registers is swapped.
+ */
+#ifndef CONFIG_CPU_BIG_ENDIAN
+	.macro	regs_to_64, rd, lbits, hbits
+#else
+	.macro	regs_to_64, rd, hbits, lbits
+#endif
+	orr	\rd, \lbits, \hbits, lsl #32
+	.endm
+
+/*
+ * Pseudo-ops for PC-relative adr/ldr/str <reg>, <symbol> where
+ * <symbol> is within the range +/- 4 GB of the PC.
+ */
+	/*
+	 * @dst: destination register (64 bit wide)
+	 * @sym: name of the symbol
+	 */
+	.macro	adr_l, dst, sym
+	adrp	\dst, \sym
+	add	\dst, \dst, :lo12:\sym
+	.endm
+
+	/*
+	 * @dst: destination register (32 or 64 bit wide)
+	 * @sym: name of the symbol
+	 * @tmp: optional 64-bit scratch register to be used if <dst> is a
+	 *       32-bit wide register, in which case it cannot be used to hold
+	 *       the address
+	 */
+	.macro	ldr_l, dst, sym, tmp=
+	.ifb	\tmp
+	adrp	\dst, \sym
+	ldr	\dst, [\dst, :lo12:\sym]
+	.else
+	adrp	\tmp, \sym
+	ldr	\dst, [\tmp, :lo12:\sym]
+	.endif
+	.endm
+
+	/*
+	 * @src: source register (32 or 64 bit wide)
+	 * @sym: name of the symbol
+	 * @tmp: mandatory 64-bit scratch register to calculate the address
+	 *       while <src> needs to be preserved.
+	 */
+	.macro	str_l, src, sym, tmp
+	adrp	\tmp, \sym
+	str	\src, [\tmp, :lo12:\sym]
+	.endm
+
+	/*
+	 * @dst: destination register
+	 */
+#if defined(__KVM_NVHE_HYPERVISOR__) || defined(__KVM_VHE_HYPERVISOR__)
+	.macro	get_this_cpu_offset, dst
+	mrs	\dst, tpidr_el2
+	.endm
+#else
+	.macro	get_this_cpu_offset, dst
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
+	mrs	\dst, tpidr_el1
+alternative_else
+	mrs	\dst, tpidr_el2
+alternative_endif
+	.endm
+
+	.macro	set_this_cpu_offset, src
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
+	msr	tpidr_el1, \src
+alternative_else
+	msr	tpidr_el2, \src
+alternative_endif
+	.endm
+#endif
+
+	/*
+	 * @dst: Result of per_cpu(sym, smp_processor_id()) (can be SP)
+	 * @sym: The name of the per-cpu variable
+	 * @tmp: scratch register
+	 */
+	.macro adr_this_cpu, dst, sym, tmp
+	adrp	\tmp, \sym
+	add	\dst, \tmp, #:lo12:\sym
+	get_this_cpu_offset \tmp
+	add	\dst, \dst, \tmp
+	.endm
+
+	/*
+	 * @dst: Result of READ_ONCE(per_cpu(sym, smp_processor_id()))
+	 * @sym: The name of the per-cpu variable
+	 * @tmp: scratch register
+	 */
+	.macro ldr_this_cpu dst, sym, tmp
+	adr_l	\dst, \sym
+	get_this_cpu_offset \tmp
+	ldr	\dst, [\dst, \tmp]
+	.endm
+
+/*
+ * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
+ */
+	.macro	vma_vm_mm, rd, rn
+	ldr	\rd, [\rn, #VMA_VM_MM]
+	.endm
+
+/*
+ * read_ctr - read CTR_EL0. If the system has mismatched register fields,
+ * provide the system wide safe value from arm64_ftr_reg_ctrel0.sys_val
+ */
+	.macro	read_ctr, reg
+#ifndef __KVM_NVHE_HYPERVISOR__
+alternative_if_not ARM64_MISMATCHED_CACHE_TYPE
+	mrs	\reg, ctr_el0			// read CTR
+	nop
+alternative_else
+	ldr_l	\reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL
+alternative_endif
+#else
+alternative_if_not ARM64_KVM_PROTECTED_MODE
+	ASM_BUG()
+alternative_else_nop_endif
+alternative_cb ARM64_ALWAYS_SYSTEM, kvm_compute_final_ctr_el0
+	movz	\reg, #0
+	movk	\reg, #0, lsl #16
+	movk	\reg, #0, lsl #32
+	movk	\reg, #0, lsl #48
+alternative_cb_end
+#endif
+	.endm
+
+
+/*
+ * raw_dcache_line_size - get the minimum D-cache line size on this CPU
+ * from the CTR register.
+ */
+	.macro	raw_dcache_line_size, reg, tmp
+	mrs	\tmp, ctr_el0			// read CTR
+	ubfm	\tmp, \tmp, #16, #19		// cache line size encoding
+	mov	\reg, #4			// bytes per word
+	lsl	\reg, \reg, \tmp		// actual cache line size
+	.endm
+
+/*
+ * dcache_line_size - get the safe D-cache line size across all CPUs
+ */
+	.macro	dcache_line_size, reg, tmp
+	read_ctr	\tmp
+	ubfm		\tmp, \tmp, #16, #19	// cache line size encoding
+	mov		\reg, #4		// bytes per word
+	lsl		\reg, \reg, \tmp	// actual cache line size
+	.endm
+
+/*
+ * raw_icache_line_size - get the minimum I-cache line size on this CPU
+ * from the CTR register.
+ */
+	.macro	raw_icache_line_size, reg, tmp
+	mrs	\tmp, ctr_el0			// read CTR
+	and	\tmp, \tmp, #0xf		// cache line size encoding
+	mov	\reg, #4			// bytes per word
+	lsl	\reg, \reg, \tmp		// actual cache line size
+	.endm
+
+/*
+ * icache_line_size - get the safe I-cache line size across all CPUs
+ */
+	.macro	icache_line_size, reg, tmp
+	read_ctr	\tmp
+	and		\tmp, \tmp, #0xf	// cache line size encoding
+	mov		\reg, #4		// bytes per word
+	lsl		\reg, \reg, \tmp	// actual cache line size
+	.endm
+
+/*
+ * tcr_set_t0sz - update TCR.T0SZ so that we can load the ID map
+ */
+	.macro	tcr_set_t0sz, valreg, t0sz
+	bfi	\valreg, \t0sz, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH
+	.endm
+
+/*
+ * tcr_set_t1sz - update TCR.T1SZ
+ */
+	.macro	tcr_set_t1sz, valreg, t1sz
+	bfi	\valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH
+	.endm
+
+/*
+ * idmap_get_t0sz - get the T0SZ value needed to cover the ID map
+ *
+ * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the
+ * entire ID map region can be mapped. As T0SZ == (64 - #bits used),
+ * this number conveniently equals the number of leading zeroes in
+ * the physical address of _end.
+ */
+	.macro	idmap_get_t0sz, reg
+	adrp	\reg, _end
+	orr	\reg, \reg, #(1 << VA_BITS_MIN) - 1
+	clz	\reg, \reg
+	.endm
+
+/*
+ * tcr_compute_pa_size - set TCR.(I)PS to the highest supported
+ * ID_AA64MMFR0_EL1.PARange value
+ *
+ *	tcr:		register with the TCR_ELx value to be updated
+ *	pos:		IPS or PS bitfield position
+ *	tmp{0,1}:	temporary registers
+ */
+	.macro	tcr_compute_pa_size, tcr, pos, tmp0, tmp1
+	mrs	\tmp0, ID_AA64MMFR0_EL1
+	// Narrow PARange to fit the PS field in TCR_ELx
+	ubfx	\tmp0, \tmp0, #ID_AA64MMFR0_EL1_PARANGE_SHIFT, #3
+	mov	\tmp1, #ID_AA64MMFR0_EL1_PARANGE_MAX
+	cmp	\tmp0, \tmp1
+	csel	\tmp0, \tmp1, \tmp0, hi
+	bfi	\tcr, \tmp0, \pos, #3
+	.endm
+
+	.macro __dcache_op_workaround_clean_cache, op, addr
+alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
+	dc	\op, \addr
+alternative_else
+	dc	civac, \addr
+alternative_endif
+	.endm
+
+/*
+ * Macro to perform a data cache maintenance for the interval
+ * [start, end) with dcache line size explicitly provided.
+ *
+ * 	op:		operation passed to dc instruction
+ * 	domain:		domain used in dsb instruciton
+ * 	start:          starting virtual address of the region
+ * 	end:            end virtual address of the region
+ *	linesz:		dcache line size
+ * 	fixup:		optional label to branch to on user fault
+ * 	Corrupts:       start, end, tmp
+ */
+	.macro dcache_by_myline_op op, domain, start, end, linesz, tmp, fixup
+	sub	\tmp, \linesz, #1
+	bic	\start, \start, \tmp
+.Ldcache_op\@:
+	.ifc	\op, cvau
+	__dcache_op_workaround_clean_cache \op, \start
+	.else
+	.ifc	\op, cvac
+	__dcache_op_workaround_clean_cache \op, \start
+	.else
+	.ifc	\op, cvap
+	sys	3, c7, c12, 1, \start	// dc cvap
+	.else
+	.ifc	\op, cvadp
+	sys	3, c7, c13, 1, \start	// dc cvadp
+	.else
+	dc	\op, \start
+	.endif
+	.endif
+	.endif
+	.endif
+	add	\start, \start, \linesz
+	cmp	\start, \end
+	b.lo	.Ldcache_op\@
+	dsb	\domain
+
+	_cond_uaccess_extable .Ldcache_op\@, \fixup
+	.endm
+
+/*
+ * Macro to perform a data cache maintenance for the interval
+ * [start, end)
+ *
+ * 	op:		operation passed to dc instruction
+ * 	domain:		domain used in dsb instruciton
+ * 	start:          starting virtual address of the region
+ * 	end:            end virtual address of the region
+ * 	fixup:		optional label to branch to on user fault
+ * 	Corrupts:       start, end, tmp1, tmp2
+ */
+	.macro dcache_by_line_op op, domain, start, end, tmp1, tmp2, fixup
+	dcache_line_size \tmp1, \tmp2
+	dcache_by_myline_op \op, \domain, \start, \end, \tmp1, \tmp2, \fixup
+	.endm
+
+/*
+ * Macro to perform an instruction cache maintenance for the interval
+ * [start, end)
+ *
+ * 	start, end:	virtual addresses describing the region
+ *	fixup:		optional label to branch to on user fault
+ * 	Corrupts:	tmp1, tmp2
+ */
+	.macro invalidate_icache_by_line start, end, tmp1, tmp2, fixup
+	icache_line_size \tmp1, \tmp2
+	sub	\tmp2, \tmp1, #1
+	bic	\tmp2, \start, \tmp2
+.Licache_op\@:
+	ic	ivau, \tmp2			// invalidate I line PoU
+	add	\tmp2, \tmp2, \tmp1
+	cmp	\tmp2, \end
+	b.lo	.Licache_op\@
+	dsb	ish
+	isb
+
+	_cond_uaccess_extable .Licache_op\@, \fixup
+	.endm
+
+/*
+ * load_ttbr1 - install @pgtbl as a TTBR1 page table
+ * pgtbl preserved
+ * tmp1/tmp2 clobbered, either may overlap with pgtbl
+ */
+	.macro		load_ttbr1, pgtbl, tmp1, tmp2
+	phys_to_ttbr	\tmp1, \pgtbl
+	offset_ttbr1 	\tmp1, \tmp2
+	msr		ttbr1_el1, \tmp1
+	isb
+	.endm
+
+/*
+ * To prevent the possibility of old and new partial table walks being visible
+ * in the tlb, switch the ttbr to a zero page when we invalidate the old
+ * records. D4.7.1 'General TLB maintenance requirements' in ARM DDI 0487A.i
+ * Even switching to our copied tables will cause a changed output address at
+ * each stage of the walk.
+ */
+	.macro break_before_make_ttbr_switch zero_page, page_table, tmp, tmp2
+	phys_to_ttbr \tmp, \zero_page
+	msr	ttbr1_el1, \tmp
+	isb
+	tlbi	vmalle1
+	dsb	nsh
+	load_ttbr1 \page_table, \tmp, \tmp2
+	.endm
+
+/*
+ * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
+ */
+	.macro	reset_pmuserenr_el0, tmpreg
+	mrs	\tmpreg, id_aa64dfr0_el1
+	sbfx	\tmpreg, \tmpreg, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4
+	cmp	\tmpreg, #1			// Skip if no PMU present
+	b.lt	9000f
+	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+9000:
+	.endm
+
+/*
+ * reset_amuserenr_el0 - reset AMUSERENR_EL0 if AMUv1 present
+ */
+	.macro	reset_amuserenr_el0, tmpreg
+	mrs	\tmpreg, id_aa64pfr0_el1	// Check ID_AA64PFR0_EL1
+	ubfx	\tmpreg, \tmpreg, #ID_AA64PFR0_EL1_AMU_SHIFT, #4
+	cbz	\tmpreg, .Lskip_\@		// Skip if no AMU present
+	msr_s	SYS_AMUSERENR_EL0, xzr		// Disable AMU access from EL0
+.Lskip_\@:
+	.endm
+/*
+ * copy_page - copy src to dest using temp registers t1-t8
+ */
+	.macro copy_page dest:req src:req t1:req t2:req t3:req t4:req t5:req t6:req t7:req t8:req
+9998:	ldp	\t1, \t2, [\src]
+	ldp	\t3, \t4, [\src, #16]
+	ldp	\t5, \t6, [\src, #32]
+	ldp	\t7, \t8, [\src, #48]
+	add	\src, \src, #64
+	stnp	\t1, \t2, [\dest]
+	stnp	\t3, \t4, [\dest, #16]
+	stnp	\t5, \t6, [\dest, #32]
+	stnp	\t7, \t8, [\dest, #48]
+	add	\dest, \dest, #64
+	tst	\src, #(PAGE_SIZE - 1)
+	b.ne	9998b
+	.endm
+
+/*
+ * Annotate a function as being unsuitable for kprobes.
+ */
+#ifdef CONFIG_KPROBES
+#define NOKPROBE(x)				\
+	.pushsection "_kprobe_blacklist", "aw";	\
+	.quad	x;				\
+	.popsection;
+#else
+#define NOKPROBE(x)
+#endif
+
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+#define EXPORT_SYMBOL_NOKASAN(name)
+#else
+#define EXPORT_SYMBOL_NOKASAN(name)	EXPORT_SYMBOL(name)
+#endif
+
+	/*
+	 * Emit a 64-bit absolute little endian symbol reference in a way that
+	 * ensures that it will be resolved at build time, even when building a
+	 * PIE binary. This requires cooperation from the linker script, which
+	 * must emit the lo32/hi32 halves individually.
+	 */
+	.macro	le64sym, sym
+	.long	\sym\()_lo32
+	.long	\sym\()_hi32
+	.endm
+
+	/*
+	 * mov_q - move an immediate constant into a 64-bit register using
+	 *         between 2 and 4 movz/movk instructions (depending on the
+	 *         magnitude and sign of the operand)
+	 */
+	.macro	mov_q, reg, val
+	.if (((\val) >> 31) == 0 || ((\val) >> 31) == 0x1ffffffff)
+	movz	\reg, :abs_g1_s:\val
+	.else
+	.if (((\val) >> 47) == 0 || ((\val) >> 47) == 0x1ffff)
+	movz	\reg, :abs_g2_s:\val
+	.else
+	movz	\reg, :abs_g3:\val
+	movk	\reg, :abs_g2_nc:\val
+	.endif
+	movk	\reg, :abs_g1_nc:\val
+	.endif
+	movk	\reg, :abs_g0_nc:\val
+	.endm
+
+/*
+ * Return the current task_struct.
+ */
+	.macro	get_current_task, rd
+	mrs	\rd, sp_el0
+	.endm
+
+/*
+ * Offset ttbr1 to allow for 48-bit kernel VAs set with 52-bit PTRS_PER_PGD.
+ * orr is used as it can cover the immediate value (and is idempotent).
+ * In future this may be nop'ed out when dealing with 52-bit kernel VAs.
+ * 	ttbr: Value of ttbr to set, modified.
+ */
+	.macro	offset_ttbr1, ttbr, tmp
+#ifdef CONFIG_ARM64_VA_BITS_52
+	mrs_s	\tmp, SYS_ID_AA64MMFR2_EL1
+	and	\tmp, \tmp, #(0xf << ID_AA64MMFR2_EL1_VARange_SHIFT)
+	cbnz	\tmp, .Lskipoffs_\@
+	orr	\ttbr, \ttbr, #TTBR1_BADDR_4852_OFFSET
+.Lskipoffs_\@ :
+#endif
+	.endm
+
+/*
+ * Arrange a physical address in a TTBR register, taking care of 52-bit
+ * addresses.
+ *
+ * 	phys:	physical address, preserved
+ * 	ttbr:	returns the TTBR value
+ */
+	.macro	phys_to_ttbr, ttbr, phys
+#ifdef CONFIG_ARM64_PA_BITS_52
+	orr	\ttbr, \phys, \phys, lsr #46
+	and	\ttbr, \ttbr, #TTBR_BADDR_MASK_52
+#else
+	mov	\ttbr, \phys
+#endif
+	.endm
+
+	.macro	phys_to_pte, pte, phys
+#ifdef CONFIG_ARM64_PA_BITS_52
+	/*
+	 * We assume \phys is 64K aligned and this is guaranteed by only
+	 * supporting this configuration with 64K pages.
+	 */
+	orr	\pte, \phys, \phys, lsr #36
+	and	\pte, \pte, #PTE_ADDR_MASK
+#else
+	mov	\pte, \phys
+#endif
+	.endm
+
+	.macro	pte_to_phys, phys, pte
+	and	\phys, \pte, #PTE_ADDR_MASK
+#ifdef CONFIG_ARM64_PA_BITS_52
+	orr	\phys, \phys, \phys, lsl #PTE_ADDR_HIGH_SHIFT
+	and	\phys, \phys, GENMASK_ULL(PHYS_MASK_SHIFT - 1, PAGE_SHIFT)
+#endif
+	.endm
+
+/*
+ * tcr_clear_errata_bits - Clear TCR bits that trigger an errata on this CPU.
+ */
+	.macro	tcr_clear_errata_bits, tcr, tmp1, tmp2
+#ifdef CONFIG_FUJITSU_ERRATUM_010001
+	mrs	\tmp1, midr_el1
+
+	mov_q	\tmp2, MIDR_FUJITSU_ERRATUM_010001_MASK
+	and	\tmp1, \tmp1, \tmp2
+	mov_q	\tmp2, MIDR_FUJITSU_ERRATUM_010001
+	cmp	\tmp1, \tmp2
+	b.ne	10f
+
+	mov_q	\tmp2, TCR_CLEAR_FUJITSU_ERRATUM_010001
+	bic	\tcr, \tcr, \tmp2
+10:
+#endif /* CONFIG_FUJITSU_ERRATUM_010001 */
+	.endm
+
+/**
+ * Errata workaround prior to disable MMU. Insert an ISB immediately prior
+ * to executing the MSR that will change SCTLR_ELn[M] from a value of 1 to 0.
+ */
+	.macro pre_disable_mmu_workaround
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_E1041
+	isb
+#endif
+	.endm
+
+	/*
+	 * frame_push - Push @regcount callee saved registers to the stack,
+	 *              starting at x19, as well as x29/x30, and set x29 to
+	 *              the new value of sp. Add @extra bytes of stack space
+	 *              for locals.
+	 */
+	.macro		frame_push, regcount:req, extra
+	__frame		st, \regcount, \extra
+	.endm
+
+	/*
+	 * frame_pop  - Pop the callee saved registers from the stack that were
+	 *              pushed in the most recent call to frame_push, as well
+	 *              as x29/x30 and any extra stack space that may have been
+	 *              allocated.
+	 */
+	.macro		frame_pop
+	__frame		ld
+	.endm
+
+	.macro		__frame_regs, reg1, reg2, op, num
+	.if		.Lframe_regcount == \num
+	\op\()r		\reg1, [sp, #(\num + 1) * 8]
+	.elseif		.Lframe_regcount > \num
+	\op\()p		\reg1, \reg2, [sp, #(\num + 1) * 8]
+	.endif
+	.endm
+
+	.macro		__frame, op, regcount, extra=0
+	.ifc		\op, st
+	.if		(\regcount) < 0 || (\regcount) > 10
+	.error		"regcount should be in the range [0 ... 10]"
+	.endif
+	.if		((\extra) % 16) != 0
+	.error		"extra should be a multiple of 16 bytes"
+	.endif
+	.ifdef		.Lframe_regcount
+	.if		.Lframe_regcount != -1
+	.error		"frame_push/frame_pop may not be nested"
+	.endif
+	.endif
+	.set		.Lframe_regcount, \regcount
+	.set		.Lframe_extra, \extra
+	.set		.Lframe_local_offset, ((\regcount + 3) / 2) * 16
+	stp		x29, x30, [sp, #-.Lframe_local_offset - .Lframe_extra]!
+	mov		x29, sp
+	.endif
+
+	__frame_regs	x19, x20, \op, 1
+	__frame_regs	x21, x22, \op, 3
+	__frame_regs	x23, x24, \op, 5
+	__frame_regs	x25, x26, \op, 7
+	__frame_regs	x27, x28, \op, 9
+
+	.ifc		\op, ld
+	.if		.Lframe_regcount == -1
+	.error		"frame_push/frame_pop may not be nested"
+	.endif
+	ldp		x29, x30, [sp], #.Lframe_local_offset + .Lframe_extra
+	.set		.Lframe_regcount, -1
+	.endif
+	.endm
+
+/*
+ * Set SCTLR_ELx to the @reg value, and invalidate the local icache
+ * in the process. This is called when setting the MMU on.
+ */
+.macro set_sctlr, sreg, reg
+	msr	\sreg, \reg
+	isb
+	/*
+	 * Invalidate the local I-cache so that any instructions fetched
+	 * speculatively from the PoC are discarded, since they may have
+	 * been dynamically patched at the PoU.
+	 */
+	ic	iallu
+	dsb	nsh
+	isb
+.endm
+
+.macro set_sctlr_el1, reg
+	set_sctlr sctlr_el1, \reg
+.endm
+
+.macro set_sctlr_el2, reg
+	set_sctlr sctlr_el2, \reg
+.endm
+
+	/*
+	 * Check whether preempt/bh-disabled asm code should yield as soon as
+	 * it is able. This is the case if we are currently running in task
+	 * context, and either a softirq is pending, or the TIF_NEED_RESCHED
+	 * flag is set and re-enabling preemption a single time would result in
+	 * a preempt count of zero. (Note that the TIF_NEED_RESCHED flag is
+	 * stored negated in the top word of the thread_info::preempt_count
+	 * field)
+	 */
+	.macro		cond_yield, lbl:req, tmp:req, tmp2:req
+	get_current_task \tmp
+	ldr		\tmp, [\tmp, #TSK_TI_PREEMPT]
+	/*
+	 * If we are serving a softirq, there is no point in yielding: the
+	 * softirq will not be preempted no matter what we do, so we should
+	 * run to completion as quickly as we can.
+	 */
+	tbnz		\tmp, #SOFTIRQ_SHIFT, .Lnoyield_\@
+#ifdef CONFIG_PREEMPTION
+	sub		\tmp, \tmp, #PREEMPT_DISABLE_OFFSET
+	cbz		\tmp, \lbl
+#endif
+	adr_l		\tmp, irq_stat + IRQ_CPUSTAT_SOFTIRQ_PENDING
+	get_this_cpu_offset	\tmp2
+	ldr		w\tmp, [\tmp, \tmp2]
+	cbnz		w\tmp, \lbl	// yield on pending softirq in task context
+.Lnoyield_\@:
+	.endm
+
+/*
+ * Branch Target Identifier (BTI)
+ */
+	.macro  bti, targets
+	.equ	.L__bti_targets_c, 34
+	.equ	.L__bti_targets_j, 36
+	.equ	.L__bti_targets_jc,38
+	hint	#.L__bti_targets_\targets
+	.endm
+
+/*
+ * This macro emits a program property note section identifying
+ * architecture features which require special handling, mainly for
+ * use in assembly files included in the VDSO.
+ */
+
+#define NT_GNU_PROPERTY_TYPE_0  5
+#define GNU_PROPERTY_AARCH64_FEATURE_1_AND      0xc0000000
+
+#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI      (1U << 0)
+#define GNU_PROPERTY_AARCH64_FEATURE_1_PAC      (1U << 1)
+
+#ifdef CONFIG_ARM64_BTI_KERNEL
+#define GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT		\
+		((GNU_PROPERTY_AARCH64_FEATURE_1_BTI |	\
+		  GNU_PROPERTY_AARCH64_FEATURE_1_PAC))
+#endif
+
+#ifdef GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT
+.macro emit_aarch64_feature_1_and, feat=GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT
+	.pushsection .note.gnu.property, "a"
+	.align  3
+	.long   2f - 1f
+	.long   6f - 3f
+	.long   NT_GNU_PROPERTY_TYPE_0
+1:      .string "GNU"
+2:
+	.align  3
+3:      .long   GNU_PROPERTY_AARCH64_FEATURE_1_AND
+	.long   5f - 4f
+4:
+	/*
+	 * This is described with an array of char in the Linux API
+	 * spec but the text and all other usage (including binutils,
+	 * clang and GCC) treat this as a 32 bit value so no swizzling
+	 * is required for big endian.
+	 */
+	.long   \feat
+5:
+	.align  3
+6:
+	.popsection
+.endm
+
+#else
+.macro emit_aarch64_feature_1_and, feat=0
+.endm
+
+#endif /* GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT */
+
+	.macro __mitigate_spectre_bhb_loop      tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_loop_iter
+	mov	\tmp, #32		// Patched to correct the immediate
+alternative_cb_end
+.Lspectre_bhb_loop\@:
+	b	. + 4
+	subs	\tmp, \tmp, #1
+	b.ne	.Lspectre_bhb_loop\@
+	sb
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	.macro mitigate_spectre_bhb_loop	tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_loop_mitigation_enable
+	b	.L_spectre_bhb_loop_done\@	// Patched to NOP
+alternative_cb_end
+	__mitigate_spectre_bhb_loop	\tmp
+.L_spectre_bhb_loop_done\@:
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	/* Save/restores x0-x3 to the stack */
+	.macro __mitigate_spectre_bhb_fw
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	stp	x0, x1, [sp, #-16]!
+	stp	x2, x3, [sp, #-16]!
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_3
+alternative_cb ARM64_ALWAYS_SYSTEM, smccc_patch_fw_mitigation_conduit
+	nop					// Patched to SMC/HVC #0
+alternative_cb_end
+	ldp	x2, x3, [sp], #16
+	ldp	x0, x1, [sp], #16
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	.macro mitigate_spectre_bhb_clear_insn
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_clearbhb
+	/* Patched to NOP when not supported */
+	clearbhb
+	isb
+alternative_cb_end
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+#endif	/* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h
new file mode 100644
index 000000000..400d279e0
--- /dev/null
+++ b/arch/arm64/include/asm/atomic.h
@@ -0,0 +1,198 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/atomic.h
+ *
+ * Copyright (C) 1996 Russell King.
+ * Copyright (C) 2002 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_ATOMIC_H
+#define __ASM_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/barrier.h>
+#include <asm/cmpxchg.h>
+#include <asm/lse.h>
+
+#define ATOMIC_OP(op)							\
+static __always_inline void arch_##op(int i, atomic_t *v)		\
+{									\
+	__lse_ll_sc_body(op, i, v);					\
+}
+
+ATOMIC_OP(atomic_andnot)
+ATOMIC_OP(atomic_or)
+ATOMIC_OP(atomic_xor)
+ATOMIC_OP(atomic_add)
+ATOMIC_OP(atomic_and)
+ATOMIC_OP(atomic_sub)
+
+#undef ATOMIC_OP
+
+#define ATOMIC_FETCH_OP(name, op)					\
+static __always_inline int arch_##op##name(int i, atomic_t *v)		\
+{									\
+	return __lse_ll_sc_body(op##name, i, v);			\
+}
+
+#define ATOMIC_FETCH_OPS(op)						\
+	ATOMIC_FETCH_OP(_relaxed, op)					\
+	ATOMIC_FETCH_OP(_acquire, op)					\
+	ATOMIC_FETCH_OP(_release, op)					\
+	ATOMIC_FETCH_OP(        , op)
+
+ATOMIC_FETCH_OPS(atomic_fetch_andnot)
+ATOMIC_FETCH_OPS(atomic_fetch_or)
+ATOMIC_FETCH_OPS(atomic_fetch_xor)
+ATOMIC_FETCH_OPS(atomic_fetch_add)
+ATOMIC_FETCH_OPS(atomic_fetch_and)
+ATOMIC_FETCH_OPS(atomic_fetch_sub)
+ATOMIC_FETCH_OPS(atomic_add_return)
+ATOMIC_FETCH_OPS(atomic_sub_return)
+
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_FETCH_OPS
+
+#define ATOMIC64_OP(op)							\
+static __always_inline void arch_##op(long i, atomic64_t *v)		\
+{									\
+	__lse_ll_sc_body(op, i, v);					\
+}
+
+ATOMIC64_OP(atomic64_andnot)
+ATOMIC64_OP(atomic64_or)
+ATOMIC64_OP(atomic64_xor)
+ATOMIC64_OP(atomic64_add)
+ATOMIC64_OP(atomic64_and)
+ATOMIC64_OP(atomic64_sub)
+
+#undef ATOMIC64_OP
+
+#define ATOMIC64_FETCH_OP(name, op)					\
+static __always_inline long arch_##op##name(long i, atomic64_t *v)	\
+{									\
+	return __lse_ll_sc_body(op##name, i, v);			\
+}
+
+#define ATOMIC64_FETCH_OPS(op)						\
+	ATOMIC64_FETCH_OP(_relaxed, op)					\
+	ATOMIC64_FETCH_OP(_acquire, op)					\
+	ATOMIC64_FETCH_OP(_release, op)					\
+	ATOMIC64_FETCH_OP(        , op)
+
+ATOMIC64_FETCH_OPS(atomic64_fetch_andnot)
+ATOMIC64_FETCH_OPS(atomic64_fetch_or)
+ATOMIC64_FETCH_OPS(atomic64_fetch_xor)
+ATOMIC64_FETCH_OPS(atomic64_fetch_add)
+ATOMIC64_FETCH_OPS(atomic64_fetch_and)
+ATOMIC64_FETCH_OPS(atomic64_fetch_sub)
+ATOMIC64_FETCH_OPS(atomic64_add_return)
+ATOMIC64_FETCH_OPS(atomic64_sub_return)
+
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_FETCH_OPS
+
+static __always_inline long arch_atomic64_dec_if_positive(atomic64_t *v)
+{
+	return __lse_ll_sc_body(atomic64_dec_if_positive, v);
+}
+
+#define arch_atomic_read(v)			__READ_ONCE((v)->counter)
+#define arch_atomic_set(v, i)			__WRITE_ONCE(((v)->counter), (i))
+
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_add_return_acquire		arch_atomic_add_return_acquire
+#define arch_atomic_add_return_release		arch_atomic_add_return_release
+#define arch_atomic_add_return			arch_atomic_add_return
+
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+#define arch_atomic_sub_return_acquire		arch_atomic_sub_return_acquire
+#define arch_atomic_sub_return_release		arch_atomic_sub_return_release
+#define arch_atomic_sub_return			arch_atomic_sub_return
+
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_add_acquire		arch_atomic_fetch_add_acquire
+#define arch_atomic_fetch_add_release		arch_atomic_fetch_add_release
+#define arch_atomic_fetch_add			arch_atomic_fetch_add
+
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
+#define arch_atomic_fetch_sub_acquire		arch_atomic_fetch_sub_acquire
+#define arch_atomic_fetch_sub_release		arch_atomic_fetch_sub_release
+#define arch_atomic_fetch_sub			arch_atomic_fetch_sub
+
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_and_acquire		arch_atomic_fetch_and_acquire
+#define arch_atomic_fetch_and_release		arch_atomic_fetch_and_release
+#define arch_atomic_fetch_and			arch_atomic_fetch_and
+
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_andnot_acquire	arch_atomic_fetch_andnot_acquire
+#define arch_atomic_fetch_andnot_release	arch_atomic_fetch_andnot_release
+#define arch_atomic_fetch_andnot		arch_atomic_fetch_andnot
+
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_or_acquire		arch_atomic_fetch_or_acquire
+#define arch_atomic_fetch_or_release		arch_atomic_fetch_or_release
+#define arch_atomic_fetch_or			arch_atomic_fetch_or
+
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
+#define arch_atomic_fetch_xor_acquire		arch_atomic_fetch_xor_acquire
+#define arch_atomic_fetch_xor_release		arch_atomic_fetch_xor_release
+#define arch_atomic_fetch_xor			arch_atomic_fetch_xor
+
+#define arch_atomic_andnot			arch_atomic_andnot
+
+/*
+ * 64-bit arch_atomic operations.
+ */
+#define ATOMIC64_INIT				ATOMIC_INIT
+#define arch_atomic64_read			arch_atomic_read
+#define arch_atomic64_set			arch_atomic_set
+
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_add_return_acquire	arch_atomic64_add_return_acquire
+#define arch_atomic64_add_return_release	arch_atomic64_add_return_release
+#define arch_atomic64_add_return		arch_atomic64_add_return
+
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+#define arch_atomic64_sub_return_acquire	arch_atomic64_sub_return_acquire
+#define arch_atomic64_sub_return_release	arch_atomic64_sub_return_release
+#define arch_atomic64_sub_return		arch_atomic64_sub_return
+
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_add_acquire		arch_atomic64_fetch_add_acquire
+#define arch_atomic64_fetch_add_release		arch_atomic64_fetch_add_release
+#define arch_atomic64_fetch_add			arch_atomic64_fetch_add
+
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
+#define arch_atomic64_fetch_sub_acquire		arch_atomic64_fetch_sub_acquire
+#define arch_atomic64_fetch_sub_release		arch_atomic64_fetch_sub_release
+#define arch_atomic64_fetch_sub			arch_atomic64_fetch_sub
+
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_and_acquire		arch_atomic64_fetch_and_acquire
+#define arch_atomic64_fetch_and_release		arch_atomic64_fetch_and_release
+#define arch_atomic64_fetch_and			arch_atomic64_fetch_and
+
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_andnot_acquire	arch_atomic64_fetch_andnot_acquire
+#define arch_atomic64_fetch_andnot_release	arch_atomic64_fetch_andnot_release
+#define arch_atomic64_fetch_andnot		arch_atomic64_fetch_andnot
+
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_or_acquire		arch_atomic64_fetch_or_acquire
+#define arch_atomic64_fetch_or_release		arch_atomic64_fetch_or_release
+#define arch_atomic64_fetch_or			arch_atomic64_fetch_or
+
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
+#define arch_atomic64_fetch_xor_acquire		arch_atomic64_fetch_xor_acquire
+#define arch_atomic64_fetch_xor_release		arch_atomic64_fetch_xor_release
+#define arch_atomic64_fetch_xor			arch_atomic64_fetch_xor
+
+#define arch_atomic64_andnot			arch_atomic64_andnot
+
+#define arch_atomic64_dec_if_positive		arch_atomic64_dec_if_positive
+
+#endif /* __ASM_ATOMIC_H */
diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h
new file mode 100644
index 000000000..89d2ba272
--- /dev/null
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -0,0 +1,339 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/atomic.h
+ *
+ * Copyright (C) 1996 Russell King.
+ * Copyright (C) 2002 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_ATOMIC_LL_SC_H
+#define __ASM_ATOMIC_LL_SC_H
+
+#include <linux/stringify.h>
+
+#ifndef CONFIG_CC_HAS_K_CONSTRAINT
+#define K
+#endif
+
+/*
+ * AArch64 UP and SMP safe atomic ops.  We use load exclusive and
+ * store exclusive to ensure that these are atomic.  We may loop
+ * to ensure that the update happens.
+ */
+
+#define ATOMIC_OP(op, asm_op, constraint)				\
+static __always_inline void						\
+__ll_sc_atomic_##op(int i, atomic_t *v)					\
+{									\
+	unsigned long tmp;						\
+	int result;							\
+									\
+	asm volatile("// atomic_" #op "\n"				\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ldxr	%w0, %2\n"					\
+	"	" #asm_op "	%w0, %w0, %w3\n"			\
+	"	stxr	%w1, %w0, %2\n"					\
+	"	cbnz	%w1, 1b\n"					\
+	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
+	: __stringify(constraint) "r" (i));				\
+}
+
+#define ATOMIC_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\
+static __always_inline int						\
+__ll_sc_atomic_##op##_return##name(int i, atomic_t *v)			\
+{									\
+	unsigned long tmp;						\
+	int result;							\
+									\
+	asm volatile("// atomic_" #op "_return" #name "\n"		\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ld" #acq "xr	%w0, %2\n"				\
+	"	" #asm_op "	%w0, %w0, %w3\n"			\
+	"	st" #rel "xr	%w1, %w0, %2\n"				\
+	"	cbnz	%w1, 1b\n"					\
+	"	" #mb							\
+	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
+	: __stringify(constraint) "r" (i)				\
+	: cl);								\
+									\
+	return result;							\
+}
+
+#define ATOMIC_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint) \
+static __always_inline int						\
+__ll_sc_atomic_fetch_##op##name(int i, atomic_t *v)			\
+{									\
+	unsigned long tmp;						\
+	int val, result;						\
+									\
+	asm volatile("// atomic_fetch_" #op #name "\n"			\
+	"	prfm	pstl1strm, %3\n"				\
+	"1:	ld" #acq "xr	%w0, %3\n"				\
+	"	" #asm_op "	%w1, %w0, %w4\n"			\
+	"	st" #rel "xr	%w2, %w1, %3\n"				\
+	"	cbnz	%w2, 1b\n"					\
+	"	" #mb							\
+	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
+	: __stringify(constraint) "r" (i)				\
+	: cl);								\
+									\
+	return result;							\
+}
+
+#define ATOMIC_OPS(...)							\
+	ATOMIC_OP(__VA_ARGS__)						\
+	ATOMIC_OP_RETURN(        , dmb ish,  , l, "memory", __VA_ARGS__)\
+	ATOMIC_OP_RETURN(_relaxed,        ,  ,  ,         , __VA_ARGS__)\
+	ATOMIC_OP_RETURN(_acquire,        , a,  , "memory", __VA_ARGS__)\
+	ATOMIC_OP_RETURN(_release,        ,  , l, "memory", __VA_ARGS__)\
+	ATOMIC_FETCH_OP (        , dmb ish,  , l, "memory", __VA_ARGS__)\
+	ATOMIC_FETCH_OP (_relaxed,        ,  ,  ,         , __VA_ARGS__)\
+	ATOMIC_FETCH_OP (_acquire,        , a,  , "memory", __VA_ARGS__)\
+	ATOMIC_FETCH_OP (_release,        ,  , l, "memory", __VA_ARGS__)
+
+ATOMIC_OPS(add, add, I)
+ATOMIC_OPS(sub, sub, J)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(...)							\
+	ATOMIC_OP(__VA_ARGS__)						\
+	ATOMIC_FETCH_OP (        , dmb ish,  , l, "memory", __VA_ARGS__)\
+	ATOMIC_FETCH_OP (_relaxed,        ,  ,  ,         , __VA_ARGS__)\
+	ATOMIC_FETCH_OP (_acquire,        , a,  , "memory", __VA_ARGS__)\
+	ATOMIC_FETCH_OP (_release,        ,  , l, "memory", __VA_ARGS__)
+
+ATOMIC_OPS(and, and, K)
+ATOMIC_OPS(or, orr, K)
+ATOMIC_OPS(xor, eor, K)
+/*
+ * GAS converts the mysterious and undocumented BIC (immediate) alias to
+ * an AND (immediate) instruction with the immediate inverted. We don't
+ * have a constraint for this, so fall back to register.
+ */
+ATOMIC_OPS(andnot, bic, )
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#define ATOMIC64_OP(op, asm_op, constraint)				\
+static __always_inline void						\
+__ll_sc_atomic64_##op(s64 i, atomic64_t *v)				\
+{									\
+	s64 result;							\
+	unsigned long tmp;						\
+									\
+	asm volatile("// atomic64_" #op "\n"				\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ldxr	%0, %2\n"					\
+	"	" #asm_op "	%0, %0, %3\n"				\
+	"	stxr	%w1, %0, %2\n"					\
+	"	cbnz	%w1, 1b"					\
+	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
+	: __stringify(constraint) "r" (i));				\
+}
+
+#define ATOMIC64_OP_RETURN(name, mb, acq, rel, cl, op, asm_op, constraint)\
+static __always_inline long						\
+__ll_sc_atomic64_##op##_return##name(s64 i, atomic64_t *v)		\
+{									\
+	s64 result;							\
+	unsigned long tmp;						\
+									\
+	asm volatile("// atomic64_" #op "_return" #name "\n"		\
+	"	prfm	pstl1strm, %2\n"				\
+	"1:	ld" #acq "xr	%0, %2\n"				\
+	"	" #asm_op "	%0, %0, %3\n"				\
+	"	st" #rel "xr	%w1, %0, %2\n"				\
+	"	cbnz	%w1, 1b\n"					\
+	"	" #mb							\
+	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)		\
+	: __stringify(constraint) "r" (i)				\
+	: cl);								\
+									\
+	return result;							\
+}
+
+#define ATOMIC64_FETCH_OP(name, mb, acq, rel, cl, op, asm_op, constraint)\
+static __always_inline long						\
+__ll_sc_atomic64_fetch_##op##name(s64 i, atomic64_t *v)			\
+{									\
+	s64 result, val;						\
+	unsigned long tmp;						\
+									\
+	asm volatile("// atomic64_fetch_" #op #name "\n"		\
+	"	prfm	pstl1strm, %3\n"				\
+	"1:	ld" #acq "xr	%0, %3\n"				\
+	"	" #asm_op "	%1, %0, %4\n"				\
+	"	st" #rel "xr	%w2, %1, %3\n"				\
+	"	cbnz	%w2, 1b\n"					\
+	"	" #mb							\
+	: "=&r" (result), "=&r" (val), "=&r" (tmp), "+Q" (v->counter)	\
+	: __stringify(constraint) "r" (i)				\
+	: cl);								\
+									\
+	return result;							\
+}
+
+#define ATOMIC64_OPS(...)						\
+	ATOMIC64_OP(__VA_ARGS__)					\
+	ATOMIC64_OP_RETURN(, dmb ish,  , l, "memory", __VA_ARGS__)	\
+	ATOMIC64_OP_RETURN(_relaxed,,  ,  ,         , __VA_ARGS__)	\
+	ATOMIC64_OP_RETURN(_acquire,, a,  , "memory", __VA_ARGS__)	\
+	ATOMIC64_OP_RETURN(_release,,  , l, "memory", __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (, dmb ish,  , l, "memory", __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (_relaxed,,  ,  ,         , __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (_acquire,, a,  , "memory", __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (_release,,  , l, "memory", __VA_ARGS__)
+
+ATOMIC64_OPS(add, add, I)
+ATOMIC64_OPS(sub, sub, J)
+
+#undef ATOMIC64_OPS
+#define ATOMIC64_OPS(...)						\
+	ATOMIC64_OP(__VA_ARGS__)					\
+	ATOMIC64_FETCH_OP (, dmb ish,  , l, "memory", __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (_relaxed,,  ,  ,         , __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (_acquire,, a,  , "memory", __VA_ARGS__)	\
+	ATOMIC64_FETCH_OP (_release,,  , l, "memory", __VA_ARGS__)
+
+ATOMIC64_OPS(and, and, L)
+ATOMIC64_OPS(or, orr, L)
+ATOMIC64_OPS(xor, eor, L)
+/*
+ * GAS converts the mysterious and undocumented BIC (immediate) alias to
+ * an AND (immediate) instruction with the immediate inverted. We don't
+ * have a constraint for this, so fall back to register.
+ */
+ATOMIC64_OPS(andnot, bic, )
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_OP_RETURN
+#undef ATOMIC64_OP
+
+static __always_inline s64
+__ll_sc_atomic64_dec_if_positive(atomic64_t *v)
+{
+	s64 result;
+	unsigned long tmp;
+
+	asm volatile("// atomic64_dec_if_positive\n"
+	"	prfm	pstl1strm, %2\n"
+	"1:	ldxr	%0, %2\n"
+	"	subs	%0, %0, #1\n"
+	"	b.lt	2f\n"
+	"	stlxr	%w1, %0, %2\n"
+	"	cbnz	%w1, 1b\n"
+	"	dmb	ish\n"
+	"2:"
+	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
+	:
+	: "cc", "memory");
+
+	return result;
+}
+
+#define __CMPXCHG_CASE(w, sfx, name, sz, mb, acq, rel, cl, constraint)	\
+static __always_inline u##sz						\
+__ll_sc__cmpxchg_case_##name##sz(volatile void *ptr,			\
+					 unsigned long old,		\
+					 u##sz new)			\
+{									\
+	unsigned long tmp;						\
+	u##sz oldval;							\
+									\
+	/*								\
+	 * Sub-word sizes require explicit casting so that the compare  \
+	 * part of the cmpxchg doesn't end up interpreting non-zero	\
+	 * upper bits of the register containing "old".			\
+	 */								\
+	if (sz < 32)							\
+		old = (u##sz)old;					\
+									\
+	asm volatile(							\
+	"	prfm	pstl1strm, %[v]\n"				\
+	"1:	ld" #acq "xr" #sfx "\t%" #w "[oldval], %[v]\n"		\
+	"	eor	%" #w "[tmp], %" #w "[oldval], %" #w "[old]\n"	\
+	"	cbnz	%" #w "[tmp], 2f\n"				\
+	"	st" #rel "xr" #sfx "\t%w[tmp], %" #w "[new], %[v]\n"	\
+	"	cbnz	%w[tmp], 1b\n"					\
+	"	" #mb "\n"						\
+	"2:"								\
+	: [tmp] "=&r" (tmp), [oldval] "=&r" (oldval),			\
+	  [v] "+Q" (*(u##sz *)ptr)					\
+	: [old] __stringify(constraint) "r" (old), [new] "r" (new)	\
+	: cl);								\
+									\
+	return oldval;							\
+}
+
+/*
+ * Earlier versions of GCC (no later than 8.1.0) appear to incorrectly
+ * handle the 'K' constraint for the value 4294967295 - thus we use no
+ * constraint for 32 bit operations.
+ */
+__CMPXCHG_CASE(w, b,     ,  8,        ,  ,  ,         , K)
+__CMPXCHG_CASE(w, h,     , 16,        ,  ,  ,         , K)
+__CMPXCHG_CASE(w,  ,     , 32,        ,  ,  ,         , K)
+__CMPXCHG_CASE( ,  ,     , 64,        ,  ,  ,         , L)
+__CMPXCHG_CASE(w, b, acq_,  8,        , a,  , "memory", K)
+__CMPXCHG_CASE(w, h, acq_, 16,        , a,  , "memory", K)
+__CMPXCHG_CASE(w,  , acq_, 32,        , a,  , "memory", K)
+__CMPXCHG_CASE( ,  , acq_, 64,        , a,  , "memory", L)
+__CMPXCHG_CASE(w, b, rel_,  8,        ,  , l, "memory", K)
+__CMPXCHG_CASE(w, h, rel_, 16,        ,  , l, "memory", K)
+__CMPXCHG_CASE(w,  , rel_, 32,        ,  , l, "memory", K)
+__CMPXCHG_CASE( ,  , rel_, 64,        ,  , l, "memory", L)
+__CMPXCHG_CASE(w, b,  mb_,  8, dmb ish,  , l, "memory", K)
+__CMPXCHG_CASE(w, h,  mb_, 16, dmb ish,  , l, "memory", K)
+__CMPXCHG_CASE(w,  ,  mb_, 32, dmb ish,  , l, "memory", K)
+__CMPXCHG_CASE( ,  ,  mb_, 64, dmb ish,  , l, "memory", L)
+
+#undef __CMPXCHG_CASE
+
+union __u128_halves {
+	u128 full;
+	struct {
+		u64 low, high;
+	};
+};
+
+#define __CMPXCHG128(name, mb, rel, cl...)                             \
+static __always_inline u128						\
+__ll_sc__cmpxchg128##name(volatile u128 *ptr, u128 old, u128 new)	\
+{									\
+	union __u128_halves r, o = { .full = (old) },			\
+			       n = { .full = (new) };			\
+       unsigned int tmp;                                               \
+									\
+	asm volatile("// __cmpxchg128" #name "\n"			\
+       "       prfm    pstl1strm, %[v]\n"                              \
+       "1:     ldxp    %[rl], %[rh], %[v]\n"                           \
+       "       cmp     %[rl], %[ol]\n"                                 \
+       "       ccmp    %[rh], %[oh], 0, eq\n"                          \
+       "       b.ne    2f\n"                                           \
+       "       st" #rel "xp    %w[tmp], %[nl], %[nh], %[v]\n"          \
+       "       cbnz    %w[tmp], 1b\n"                                  \
+	"	" #mb "\n"						\
+	"2:"								\
+       : [v] "+Q" (*(u128 *)ptr),                                      \
+         [rl] "=&r" (r.low), [rh] "=&r" (r.high),                      \
+         [tmp] "=&r" (tmp)                                             \
+       : [ol] "r" (o.low), [oh] "r" (o.high),                          \
+         [nl] "r" (n.low), [nh] "r" (n.high)                           \
+       : "cc", ##cl);                                                  \
+									\
+	return r.full;							\
+}
+
+__CMPXCHG128(   ,        ,  )
+__CMPXCHG128(_mb, dmb ish, l, "memory")
+
+#undef __CMPXCHG128
+
+#undef K
+
+#endif	/* __ASM_ATOMIC_LL_SC_H */
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
new file mode 100644
index 000000000..87f568a94
--- /dev/null
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -0,0 +1,315 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/atomic.h
+ *
+ * Copyright (C) 1996 Russell King.
+ * Copyright (C) 2002 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_ATOMIC_LSE_H
+#define __ASM_ATOMIC_LSE_H
+
+#define ATOMIC_OP(op, asm_op)						\
+static __always_inline void						\
+__lse_atomic_##op(int i, atomic_t *v)					\
+{									\
+	asm volatile(							\
+	__LSE_PREAMBLE							\
+	"	" #asm_op "	%w[i], %[v]\n"				\
+	: [v] "+Q" (v->counter)						\
+	: [i] "r" (i));							\
+}
+
+ATOMIC_OP(andnot, stclr)
+ATOMIC_OP(or, stset)
+ATOMIC_OP(xor, steor)
+ATOMIC_OP(add, stadd)
+
+static __always_inline void __lse_atomic_sub(int i, atomic_t *v)
+{
+	__lse_atomic_add(-i, v);
+}
+
+#undef ATOMIC_OP
+
+#define ATOMIC_FETCH_OP(name, mb, op, asm_op, cl...)			\
+static __always_inline int						\
+__lse_atomic_fetch_##op##name(int i, atomic_t *v)			\
+{									\
+	int old;							\
+									\
+	asm volatile(							\
+	__LSE_PREAMBLE							\
+	"	" #asm_op #mb "	%w[i], %w[old], %[v]"			\
+	: [v] "+Q" (v->counter),					\
+	  [old] "=r" (old)						\
+	: [i] "r" (i)							\
+	: cl);								\
+									\
+	return old;							\
+}
+
+#define ATOMIC_FETCH_OPS(op, asm_op)					\
+	ATOMIC_FETCH_OP(_relaxed,   , op, asm_op)			\
+	ATOMIC_FETCH_OP(_acquire,  a, op, asm_op, "memory")		\
+	ATOMIC_FETCH_OP(_release,  l, op, asm_op, "memory")		\
+	ATOMIC_FETCH_OP(        , al, op, asm_op, "memory")
+
+ATOMIC_FETCH_OPS(andnot, ldclr)
+ATOMIC_FETCH_OPS(or, ldset)
+ATOMIC_FETCH_OPS(xor, ldeor)
+ATOMIC_FETCH_OPS(add, ldadd)
+
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_FETCH_OPS
+
+#define ATOMIC_FETCH_OP_SUB(name)					\
+static __always_inline int						\
+__lse_atomic_fetch_sub##name(int i, atomic_t *v)			\
+{									\
+	return __lse_atomic_fetch_add##name(-i, v);			\
+}
+
+ATOMIC_FETCH_OP_SUB(_relaxed)
+ATOMIC_FETCH_OP_SUB(_acquire)
+ATOMIC_FETCH_OP_SUB(_release)
+ATOMIC_FETCH_OP_SUB(        )
+
+#undef ATOMIC_FETCH_OP_SUB
+
+#define ATOMIC_OP_ADD_SUB_RETURN(name)					\
+static __always_inline int						\
+__lse_atomic_add_return##name(int i, atomic_t *v)			\
+{									\
+	return __lse_atomic_fetch_add##name(i, v) + i;			\
+}									\
+									\
+static __always_inline int						\
+__lse_atomic_sub_return##name(int i, atomic_t *v)			\
+{									\
+	return __lse_atomic_fetch_sub(i, v) - i;			\
+}
+
+ATOMIC_OP_ADD_SUB_RETURN(_relaxed)
+ATOMIC_OP_ADD_SUB_RETURN(_acquire)
+ATOMIC_OP_ADD_SUB_RETURN(_release)
+ATOMIC_OP_ADD_SUB_RETURN(        )
+
+#undef ATOMIC_OP_ADD_SUB_RETURN
+
+static __always_inline void __lse_atomic_and(int i, atomic_t *v)
+{
+	return __lse_atomic_andnot(~i, v);
+}
+
+#define ATOMIC_FETCH_OP_AND(name, mb, cl...)				\
+static __always_inline int						\
+__lse_atomic_fetch_and##name(int i, atomic_t *v)			\
+{									\
+	return __lse_atomic_fetch_andnot##name(~i, v);			\
+}
+
+ATOMIC_FETCH_OP_AND(_relaxed,   )
+ATOMIC_FETCH_OP_AND(_acquire,  a, "memory")
+ATOMIC_FETCH_OP_AND(_release,  l, "memory")
+ATOMIC_FETCH_OP_AND(        , al, "memory")
+
+#undef ATOMIC_FETCH_OP_AND
+
+#define ATOMIC64_OP(op, asm_op)						\
+static __always_inline void						\
+__lse_atomic64_##op(s64 i, atomic64_t *v)				\
+{									\
+	asm volatile(							\
+	__LSE_PREAMBLE							\
+	"	" #asm_op "	%[i], %[v]\n"				\
+	: [v] "+Q" (v->counter)						\
+	: [i] "r" (i));							\
+}
+
+ATOMIC64_OP(andnot, stclr)
+ATOMIC64_OP(or, stset)
+ATOMIC64_OP(xor, steor)
+ATOMIC64_OP(add, stadd)
+
+static __always_inline void __lse_atomic64_sub(s64 i, atomic64_t *v)
+{
+	__lse_atomic64_add(-i, v);
+}
+
+#undef ATOMIC64_OP
+
+#define ATOMIC64_FETCH_OP(name, mb, op, asm_op, cl...)			\
+static __always_inline long						\
+__lse_atomic64_fetch_##op##name(s64 i, atomic64_t *v)			\
+{									\
+	s64 old;							\
+									\
+	asm volatile(							\
+	__LSE_PREAMBLE							\
+	"	" #asm_op #mb "	%[i], %[old], %[v]"			\
+	: [v] "+Q" (v->counter),					\
+	  [old] "=r" (old)						\
+	: [i] "r" (i) 							\
+	: cl);								\
+									\
+	return old;							\
+}
+
+#define ATOMIC64_FETCH_OPS(op, asm_op)					\
+	ATOMIC64_FETCH_OP(_relaxed,   , op, asm_op)			\
+	ATOMIC64_FETCH_OP(_acquire,  a, op, asm_op, "memory")		\
+	ATOMIC64_FETCH_OP(_release,  l, op, asm_op, "memory")		\
+	ATOMIC64_FETCH_OP(        , al, op, asm_op, "memory")
+
+ATOMIC64_FETCH_OPS(andnot, ldclr)
+ATOMIC64_FETCH_OPS(or, ldset)
+ATOMIC64_FETCH_OPS(xor, ldeor)
+ATOMIC64_FETCH_OPS(add, ldadd)
+
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_FETCH_OPS
+
+#define ATOMIC64_FETCH_OP_SUB(name)					\
+static __always_inline long						\
+__lse_atomic64_fetch_sub##name(s64 i, atomic64_t *v)			\
+{									\
+	return __lse_atomic64_fetch_add##name(-i, v);			\
+}
+
+ATOMIC64_FETCH_OP_SUB(_relaxed)
+ATOMIC64_FETCH_OP_SUB(_acquire)
+ATOMIC64_FETCH_OP_SUB(_release)
+ATOMIC64_FETCH_OP_SUB(        )
+
+#undef ATOMIC64_FETCH_OP_SUB
+
+#define ATOMIC64_OP_ADD_SUB_RETURN(name)				\
+static __always_inline long						\
+__lse_atomic64_add_return##name(s64 i, atomic64_t *v)			\
+{									\
+	return __lse_atomic64_fetch_add##name(i, v) + i;		\
+}									\
+									\
+static __always_inline long						\
+__lse_atomic64_sub_return##name(s64 i, atomic64_t *v)			\
+{									\
+	return __lse_atomic64_fetch_sub##name(i, v) - i;		\
+}
+
+ATOMIC64_OP_ADD_SUB_RETURN(_relaxed)
+ATOMIC64_OP_ADD_SUB_RETURN(_acquire)
+ATOMIC64_OP_ADD_SUB_RETURN(_release)
+ATOMIC64_OP_ADD_SUB_RETURN(        )
+
+#undef ATOMIC64_OP_ADD_SUB_RETURN
+
+static __always_inline void __lse_atomic64_and(s64 i, atomic64_t *v)
+{
+	return __lse_atomic64_andnot(~i, v);
+}
+
+#define ATOMIC64_FETCH_OP_AND(name, mb, cl...)				\
+static __always_inline long						\
+__lse_atomic64_fetch_and##name(s64 i, atomic64_t *v)			\
+{									\
+	return __lse_atomic64_fetch_andnot##name(~i, v);		\
+}
+
+ATOMIC64_FETCH_OP_AND(_relaxed,   )
+ATOMIC64_FETCH_OP_AND(_acquire,  a, "memory")
+ATOMIC64_FETCH_OP_AND(_release,  l, "memory")
+ATOMIC64_FETCH_OP_AND(        , al, "memory")
+
+#undef ATOMIC64_FETCH_OP_AND
+
+static __always_inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v)
+{
+	unsigned long tmp;
+
+	asm volatile(
+	__LSE_PREAMBLE
+	"1:	ldr	%x[tmp], %[v]\n"
+	"	subs	%[ret], %x[tmp], #1\n"
+	"	b.lt	2f\n"
+	"	casal	%x[tmp], %[ret], %[v]\n"
+	"	sub	%x[tmp], %x[tmp], #1\n"
+	"	sub	%x[tmp], %x[tmp], %[ret]\n"
+	"	cbnz	%x[tmp], 1b\n"
+	"2:"
+	: [ret] "+&r" (v), [v] "+Q" (v->counter), [tmp] "=&r" (tmp)
+	:
+	: "cc", "memory");
+
+	return (long)v;
+}
+
+#define __CMPXCHG_CASE(w, sfx, name, sz, mb, cl...)			\
+static __always_inline u##sz						\
+__lse__cmpxchg_case_##name##sz(volatile void *ptr,			\
+					      u##sz old,		\
+					      u##sz new)		\
+{									\
+	asm volatile(							\
+	__LSE_PREAMBLE							\
+	"	cas" #mb #sfx "	%" #w "[old], %" #w "[new], %[v]\n"	\
+	: [v] "+Q" (*(u##sz *)ptr),					\
+	  [old] "+r" (old)						\
+	: [new] "rZ" (new)						\
+	: cl);								\
+									\
+	return old;							\
+}
+
+__CMPXCHG_CASE(w, b,     ,  8,   )
+__CMPXCHG_CASE(w, h,     , 16,   )
+__CMPXCHG_CASE(w,  ,     , 32,   )
+__CMPXCHG_CASE(x,  ,     , 64,   )
+__CMPXCHG_CASE(w, b, acq_,  8,  a, "memory")
+__CMPXCHG_CASE(w, h, acq_, 16,  a, "memory")
+__CMPXCHG_CASE(w,  , acq_, 32,  a, "memory")
+__CMPXCHG_CASE(x,  , acq_, 64,  a, "memory")
+__CMPXCHG_CASE(w, b, rel_,  8,  l, "memory")
+__CMPXCHG_CASE(w, h, rel_, 16,  l, "memory")
+__CMPXCHG_CASE(w,  , rel_, 32,  l, "memory")
+__CMPXCHG_CASE(x,  , rel_, 64,  l, "memory")
+__CMPXCHG_CASE(w, b,  mb_,  8, al, "memory")
+__CMPXCHG_CASE(w, h,  mb_, 16, al, "memory")
+__CMPXCHG_CASE(w,  ,  mb_, 32, al, "memory")
+__CMPXCHG_CASE(x,  ,  mb_, 64, al, "memory")
+
+#undef __CMPXCHG_CASE
+
+#define __CMPXCHG128(name, mb, cl...)					\
+static __always_inline u128						\
+__lse__cmpxchg128##name(volatile u128 *ptr, u128 old, u128 new)		\
+{									\
+	union __u128_halves r, o = { .full = (old) },			\
+			       n = { .full = (new) };			\
+	register unsigned long x0 asm ("x0") = o.low;			\
+	register unsigned long x1 asm ("x1") = o.high;			\
+	register unsigned long x2 asm ("x2") = n.low;			\
+	register unsigned long x3 asm ("x3") = n.high;			\
+	register unsigned long x4 asm ("x4") = (unsigned long)ptr;	\
+									\
+	asm volatile(							\
+	__LSE_PREAMBLE							\
+	"	casp" #mb "\t%[old1], %[old2], %[new1], %[new2], %[v]\n"\
+	: [old1] "+&r" (x0), [old2] "+&r" (x1),				\
+	  [v] "+Q" (*(u128 *)ptr)					\
+	: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4),		\
+	  [oldval1] "r" (o.low), [oldval2] "r" (o.high)			\
+	: cl);								\
+									\
+	r.low = x0; r.high = x1;					\
+									\
+	return r.full;							\
+}
+
+__CMPXCHG128(   ,   )
+__CMPXCHG128(_mb, al, "memory")
+
+#undef __CMPXCHG128
+
+#endif	/* __ASM_ATOMIC_LSE_H */
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
new file mode 100644
index 000000000..cf2987464
--- /dev/null
+++ b/arch/arm64/include/asm/barrier.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/barrier.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_BARRIER_H
+#define __ASM_BARRIER_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kasan-checks.h>
+
+#include <asm/alternative-macros.h>
+
+#define __nops(n)	".rept	" #n "\nnop\n.endr\n"
+#define nops(n)		asm volatile(__nops(n))
+
+#define sev()		asm volatile("sev" : : : "memory")
+#define wfe()		asm volatile("wfe" : : : "memory")
+#define wfet(val)	asm volatile("msr s0_3_c1_c0_0, %0"	\
+				     : : "r" (val) : "memory")
+#define wfi()		asm volatile("wfi" : : : "memory")
+#define wfit(val)	asm volatile("msr s0_3_c1_c0_1, %0"	\
+				     : : "r" (val) : "memory")
+
+#define isb()		asm volatile("isb" : : : "memory")
+#define dmb(opt)	asm volatile("dmb " #opt : : : "memory")
+#define dsb(opt)	asm volatile("dsb " #opt : : : "memory")
+
+#define psb_csync()	asm volatile("hint #17" : : : "memory")
+#define __tsb_csync()	asm volatile("hint #18" : : : "memory")
+#define csdb()		asm volatile("hint #20" : : : "memory")
+
+/*
+ * Data Gathering Hint:
+ * This instruction prevents merging memory accesses with Normal-NC or
+ * Device-GRE attributes before the hint instruction with any memory accesses
+ * appearing after the hint instruction.
+ */
+#define dgh()		asm volatile("hint #6" : : : "memory")
+
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+#define pmr_sync()						\
+	do {							\
+		asm volatile(					\
+		ALTERNATIVE_CB("dsb sy",			\
+			       ARM64_HAS_GIC_PRIO_RELAXED_SYNC,	\
+			       alt_cb_patch_nops)		\
+		);						\
+	} while(0)
+#else
+#define pmr_sync()	do {} while (0)
+#endif
+
+#define __mb()		dsb(sy)
+#define __rmb()		dsb(ld)
+#define __wmb()		dsb(st)
+
+#define __dma_mb()	dmb(osh)
+#define __dma_rmb()	dmb(oshld)
+#define __dma_wmb()	dmb(oshst)
+
+#define io_stop_wc()	dgh()
+
+#define tsb_csync()								\
+	do {									\
+		/*								\
+		 * CPUs affected by Arm Erratum 2054223 or 2067961 needs	\
+		 * another TSB to ensure the trace is flushed. The barriers	\
+		 * don't have to be strictly back to back, as long as the	\
+		 * CPU is in trace prohibited state.				\
+		 */								\
+		if (cpus_have_final_cap(ARM64_WORKAROUND_TSB_FLUSH_FAILURE))	\
+			__tsb_csync();						\
+		__tsb_csync();							\
+	} while (0)
+
+/*
+ * Generate a mask for array_index__nospec() that is ~0UL when 0 <= idx < sz
+ * and 0 otherwise.
+ */
+#define array_index_mask_nospec array_index_mask_nospec
+static inline unsigned long array_index_mask_nospec(unsigned long idx,
+						    unsigned long sz)
+{
+	unsigned long mask;
+
+	asm volatile(
+	"	cmp	%1, %2\n"
+	"	sbc	%0, xzr, xzr\n"
+	: "=r" (mask)
+	: "r" (idx), "Ir" (sz)
+	: "cc");
+
+	csdb();
+	return mask;
+}
+
+/*
+ * Ensure that reads of the counter are treated the same as memory reads
+ * for the purposes of ordering by subsequent memory barriers.
+ *
+ * This insanity brought to you by speculative system register reads,
+ * out-of-order memory accesses, sequence locks and Thomas Gleixner.
+ *
+ * https://lore.kernel.org/r/alpine.DEB.2.21.1902081950260.1662@nanos.tec.linutronix.de/
+ */
+#define arch_counter_enforce_ordering(val) do {				\
+	u64 tmp, _val = (val);						\
+									\
+	asm volatile(							\
+	"	eor	%0, %1, %1\n"					\
+	"	add	%0, sp, %0\n"					\
+	"	ldr	xzr, [%0]"					\
+	: "=r" (tmp) : "r" (_val));					\
+} while (0)
+
+#define __smp_mb()	dmb(ish)
+#define __smp_rmb()	dmb(ishld)
+#define __smp_wmb()	dmb(ishst)
+
+#define __smp_store_release(p, v)					\
+do {									\
+	typeof(p) __p = (p);						\
+	union { __unqual_scalar_typeof(*p) __val; char __c[1]; } __u =	\
+		{ .__val = (__force __unqual_scalar_typeof(*p)) (v) };	\
+	compiletime_assert_atomic_type(*p);				\
+	kasan_check_write(__p, sizeof(*p));				\
+	switch (sizeof(*p)) {						\
+	case 1:								\
+		asm volatile ("stlrb %w1, %0"				\
+				: "=Q" (*__p)				\
+				: "rZ" (*(__u8 *)__u.__c)		\
+				: "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile ("stlrh %w1, %0"				\
+				: "=Q" (*__p)				\
+				: "rZ" (*(__u16 *)__u.__c)		\
+				: "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile ("stlr %w1, %0"				\
+				: "=Q" (*__p)				\
+				: "rZ" (*(__u32 *)__u.__c)		\
+				: "memory");				\
+		break;							\
+	case 8:								\
+		asm volatile ("stlr %x1, %0"				\
+				: "=Q" (*__p)				\
+				: "rZ" (*(__u64 *)__u.__c)		\
+				: "memory");				\
+		break;							\
+	}								\
+} while (0)
+
+#define __smp_load_acquire(p)						\
+({									\
+	union { __unqual_scalar_typeof(*p) __val; char __c[1]; } __u;	\
+	typeof(p) __p = (p);						\
+	compiletime_assert_atomic_type(*p);				\
+	kasan_check_read(__p, sizeof(*p));				\
+	switch (sizeof(*p)) {						\
+	case 1:								\
+		asm volatile ("ldarb %w0, %1"				\
+			: "=r" (*(__u8 *)__u.__c)			\
+			: "Q" (*__p) : "memory");			\
+		break;							\
+	case 2:								\
+		asm volatile ("ldarh %w0, %1"				\
+			: "=r" (*(__u16 *)__u.__c)			\
+			: "Q" (*__p) : "memory");			\
+		break;							\
+	case 4:								\
+		asm volatile ("ldar %w0, %1"				\
+			: "=r" (*(__u32 *)__u.__c)			\
+			: "Q" (*__p) : "memory");			\
+		break;							\
+	case 8:								\
+		asm volatile ("ldar %0, %1"				\
+			: "=r" (*(__u64 *)__u.__c)			\
+			: "Q" (*__p) : "memory");			\
+		break;							\
+	}								\
+	(typeof(*p))__u.__val;						\
+})
+
+#define smp_cond_load_relaxed(ptr, cond_expr)				\
+({									\
+	typeof(ptr) __PTR = (ptr);					\
+	__unqual_scalar_typeof(*ptr) VAL;				\
+	for (;;) {							\
+		VAL = READ_ONCE(*__PTR);				\
+		if (cond_expr)						\
+			break;						\
+		__cmpwait_relaxed(__PTR, VAL);				\
+	}								\
+	(typeof(*ptr))VAL;						\
+})
+
+#define smp_cond_load_acquire(ptr, cond_expr)				\
+({									\
+	typeof(ptr) __PTR = (ptr);					\
+	__unqual_scalar_typeof(*ptr) VAL;				\
+	for (;;) {							\
+		VAL = smp_load_acquire(__PTR);				\
+		if (cond_expr)						\
+			break;						\
+		__cmpwait_relaxed(__PTR, VAL);				\
+	}								\
+	(typeof(*ptr))VAL;						\
+})
+
+#include <asm-generic/barrier.h>
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_BARRIER_H */
diff --git a/arch/arm64/include/asm/bitops.h b/arch/arm64/include/asm/bitops.h
new file mode 100644
index 000000000..9b3c78713
--- /dev/null
+++ b/arch/arm64/include/asm/bitops.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <linux/compiler.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/builtin-__ffs.h>
+#include <asm-generic/bitops/builtin-ffs.h>
+#include <asm-generic/bitops/builtin-__fls.h>
+#include <asm-generic/bitops/builtin-fls.h>
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/le.h>
+#include <asm-generic/bitops/ext2-atomic-setbit.h>
+
+#endif /* __ASM_BITOPS_H */
diff --git a/arch/arm64/include/asm/bitrev.h b/arch/arm64/include/asm/bitrev.h
new file mode 100644
index 000000000..6faf9fba8
--- /dev/null
+++ b/arch/arm64/include/asm/bitrev.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_BITREV_H
+#define __ASM_BITREV_H
+static __always_inline __attribute_const__ u32 __arch_bitrev32(u32 x)
+{
+	__asm__ ("rbit %w0, %w1" : "=r" (x) : "r" (x));
+	return x;
+}
+
+static __always_inline __attribute_const__ u16 __arch_bitrev16(u16 x)
+{
+	return __arch_bitrev32((u32)x) >> 16;
+}
+
+static __always_inline __attribute_const__ u8 __arch_bitrev8(u8 x)
+{
+	return __arch_bitrev32((u32)x) >> 24;
+}
+
+#endif
diff --git a/arch/arm64/include/asm/boot.h b/arch/arm64/include/asm/boot.h
new file mode 100644
index 000000000..3e7943fd1
--- /dev/null
+++ b/arch/arm64/include/asm/boot.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_BOOT_H
+#define __ASM_BOOT_H
+
+#include <linux/sizes.h>
+
+/*
+ * arm64 requires the DTB to be 8 byte aligned and
+ * not exceed 2MB in size.
+ */
+#define MIN_FDT_ALIGN		8
+#define MAX_FDT_SIZE		SZ_2M
+
+/*
+ * arm64 requires the kernel image to placed at a 2 MB aligned base address
+ */
+#define MIN_KIMG_ALIGN		SZ_2M
+
+#endif
diff --git a/arch/arm64/include/asm/brk-imm.h b/arch/arm64/include/asm/brk-imm.h
new file mode 100644
index 000000000..1abdcd508
--- /dev/null
+++ b/arch/arm64/include/asm/brk-imm.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_BRK_IMM_H
+#define __ASM_BRK_IMM_H
+
+/*
+ * #imm16 values used for BRK instruction generation
+ * 0x004: for installing kprobes
+ * 0x005: for installing uprobes
+ * 0x006: for kprobe software single-step
+ * Allowed values for kgdb are 0x400 - 0x7ff
+ * 0x100: for triggering a fault on purpose (reserved)
+ * 0x400: for dynamic BRK instruction
+ * 0x401: for compile time BRK instruction
+ * 0x800: kernel-mode BUG() and WARN() traps
+ * 0x9xx: tag-based KASAN trap (allowed values 0x900 - 0x9ff)
+ * 0x55xx: Undefined Behavior Sanitizer traps ('U' << 8)
+ * 0x8xxx: Control-Flow Integrity traps
+ */
+#define KPROBES_BRK_IMM			0x004
+#define UPROBES_BRK_IMM			0x005
+#define KPROBES_BRK_SS_IMM		0x006
+#define FAULT_BRK_IMM			0x100
+#define KGDB_DYN_DBG_BRK_IMM		0x400
+#define KGDB_COMPILED_DBG_BRK_IMM	0x401
+#define BUG_BRK_IMM			0x800
+#define KASAN_BRK_IMM			0x900
+#define KASAN_BRK_MASK			0x0ff
+#define UBSAN_BRK_IMM			0x5500
+#define UBSAN_BRK_MASK			0x00ff
+
+#define CFI_BRK_IMM_TARGET		GENMASK(4, 0)
+#define CFI_BRK_IMM_TYPE		GENMASK(9, 5)
+#define CFI_BRK_IMM_BASE		0x8000
+#define CFI_BRK_IMM_MASK		(CFI_BRK_IMM_TARGET | CFI_BRK_IMM_TYPE)
+
+#endif
diff --git a/arch/arm64/include/asm/bug.h b/arch/arm64/include/asm/bug.h
new file mode 100644
index 000000000..28be048db
--- /dev/null
+++ b/arch/arm64/include/asm/bug.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015  ARM Limited
+ * Author: Dave Martin <Dave.Martin@arm.com>
+ */
+
+#ifndef _ARCH_ARM64_ASM_BUG_H
+#define _ARCH_ARM64_ASM_BUG_H
+
+#include <linux/stringify.h>
+
+#include <asm/asm-bug.h>
+
+#define __BUG_FLAGS(flags)				\
+	asm volatile (__stringify(ASM_BUG_FLAGS(flags)));
+
+#define BUG() do {					\
+	__BUG_FLAGS(0);					\
+	unreachable();					\
+} while (0)
+
+#define __WARN_FLAGS(flags) __BUG_FLAGS(BUGFLAG_WARNING|(flags))
+
+#define HAVE_ARCH_BUG
+
+#include <asm-generic/bug.h>
+
+#endif /* ! _ARCH_ARM64_ASM_BUG_H */
diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
new file mode 100644
index 000000000..ceb368d33
--- /dev/null
+++ b/arch/arm64/include/asm/cache.h
@@ -0,0 +1,129 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+#define L1_CACHE_SHIFT		(6)
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define CLIDR_LOUU_SHIFT	27
+#define CLIDR_LOC_SHIFT		24
+#define CLIDR_LOUIS_SHIFT	21
+
+#define CLIDR_LOUU(clidr)	(((clidr) >> CLIDR_LOUU_SHIFT) & 0x7)
+#define CLIDR_LOC(clidr)	(((clidr) >> CLIDR_LOC_SHIFT) & 0x7)
+#define CLIDR_LOUIS(clidr)	(((clidr) >> CLIDR_LOUIS_SHIFT) & 0x7)
+
+/* Ctypen, bits[3(n - 1) + 2 : 3(n - 1)], for n = 1 to 7 */
+#define CLIDR_CTYPE_SHIFT(level)	(3 * (level - 1))
+#define CLIDR_CTYPE_MASK(level)		(7 << CLIDR_CTYPE_SHIFT(level))
+#define CLIDR_CTYPE(clidr, level)	\
+	(((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level))
+
+/* Ttypen, bits [2(n - 1) + 34 : 2(n - 1) + 33], for n = 1 to 7 */
+#define CLIDR_TTYPE_SHIFT(level)	(2 * ((level) - 1) + CLIDR_EL1_Ttypen_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_DMA_MINALIGN	(128)
+#define ARCH_KMALLOC_MINALIGN	(8)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/kasan-enabled.h>
+
+#include <asm/cputype.h>
+#include <asm/mte-def.h>
+#include <asm/sysreg.h>
+
+#ifdef CONFIG_KASAN_SW_TAGS
+#define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
+#elif defined(CONFIG_KASAN_HW_TAGS)
+static inline unsigned int arch_slab_minalign(void)
+{
+	return kasan_hw_tags_enabled() ? MTE_GRANULE_SIZE :
+					 __alignof__(unsigned long long);
+}
+#define arch_slab_minalign() arch_slab_minalign()
+#endif
+
+#define CTR_L1IP(ctr)		SYS_FIELD_GET(CTR_EL0, L1Ip, ctr)
+
+#define ICACHEF_ALIASING	0
+#define ICACHEF_VPIPT		1
+extern unsigned long __icache_flags;
+
+/*
+ * Whilst the D-side always behaves as PIPT on AArch64, aliasing is
+ * permitted in the I-cache.
+ */
+static inline int icache_is_aliasing(void)
+{
+	return test_bit(ICACHEF_ALIASING, &__icache_flags);
+}
+
+static __always_inline int icache_is_vpipt(void)
+{
+	return test_bit(ICACHEF_VPIPT, &__icache_flags);
+}
+
+static inline u32 cache_type_cwg(void)
+{
+	return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype());
+}
+
+#define __read_mostly __section(".data..read_mostly")
+
+static inline int cache_line_size_of_cpu(void)
+{
+	u32 cwg = cache_type_cwg();
+
+	return cwg ? 4 << cwg : ARCH_DMA_MINALIGN;
+}
+
+int cache_line_size(void);
+
+#define dma_get_cache_alignment	cache_line_size
+
+/*
+ * Read the effective value of CTR_EL0.
+ *
+ * According to ARM ARM for ARMv8-A (ARM DDI 0487C.a),
+ * section D10.2.33 "CTR_EL0, Cache Type Register" :
+ *
+ * CTR_EL0.IDC reports the data cache clean requirements for
+ * instruction to data coherence.
+ *
+ *  0 - dcache clean to PoU is required unless :
+ *     (CLIDR_EL1.LoC == 0) || (CLIDR_EL1.LoUIS == 0 && CLIDR_EL1.LoUU == 0)
+ *  1 - dcache clean to PoU is not required for i-to-d coherence.
+ *
+ * This routine provides the CTR_EL0 with the IDC field updated to the
+ * effective state.
+ */
+static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void)
+{
+	u32 ctr = read_cpuid_cachetype();
+
+	if (!(ctr & BIT(CTR_EL0_IDC_SHIFT))) {
+		u64 clidr = read_sysreg(clidr_el1);
+
+		if (CLIDR_LOC(clidr) == 0 ||
+		    (CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0))
+			ctr |= BIT(CTR_EL0_IDC_SHIFT);
+	}
+
+	return ctr;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
new file mode 100644
index 000000000..d115451ed
--- /dev/null
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/cacheflush.h
+ *
+ * Copyright (C) 1999-2002 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_CACHEFLUSH_H
+#define __ASM_CACHEFLUSH_H
+
+#include <linux/kgdb.h>
+#include <linux/mm.h>
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
+ */
+#define PG_dcache_clean PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/arm64/mm/cache.S implements these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive; start
+ *	addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/core-api/cachetlb.rst for more information. Please note that
+ *	the implementation assumes non-aliasing VIPT D-cache and (aliasing)
+ *	VIPT I-cache.
+ *
+ *	All functions below apply to the interval [start, end)
+ *		- start  - virtual start address (inclusive)
+ *		- end    - virtual end address (exclusive)
+ *
+ *	caches_clean_inval_pou(start, end)
+ *
+ *		Ensure coherency between the I-cache and the D-cache region to
+ *		the Point of Unification.
+ *
+ *	caches_clean_inval_user_pou(start, end)
+ *
+ *		Ensure coherency between the I-cache and the D-cache region to
+ *		the Point of Unification.
+ *		Use only if the region might access user memory.
+ *
+ *	icache_inval_pou(start, end)
+ *
+ *		Invalidate I-cache region to the Point of Unification.
+ *
+ *	dcache_clean_inval_poc(start, end)
+ *
+ *		Clean and invalidate D-cache region to the Point of Coherency.
+ *
+ *	dcache_inval_poc(start, end)
+ *
+ *		Invalidate D-cache region to the Point of Coherency.
+ *
+ *	dcache_clean_poc(start, end)
+ *
+ *		Clean D-cache region to the Point of Coherency.
+ *
+ *	dcache_clean_pop(start, end)
+ *
+ *		Clean D-cache region to the Point of Persistence.
+ *
+ *	dcache_clean_pou(start, end)
+ *
+ *		Clean D-cache region to the Point of Unification.
+ */
+extern void caches_clean_inval_pou(unsigned long start, unsigned long end);
+extern void icache_inval_pou(unsigned long start, unsigned long end);
+extern void dcache_clean_inval_poc(unsigned long start, unsigned long end);
+extern void dcache_inval_poc(unsigned long start, unsigned long end);
+extern void dcache_clean_poc(unsigned long start, unsigned long end);
+extern void dcache_clean_pop(unsigned long start, unsigned long end);
+extern void dcache_clean_pou(unsigned long start, unsigned long end);
+extern long caches_clean_inval_user_pou(unsigned long start, unsigned long end);
+extern void sync_icache_aliases(unsigned long start, unsigned long end);
+
+static inline void flush_icache_range(unsigned long start, unsigned long end)
+{
+	caches_clean_inval_pou(start, end);
+
+	/*
+	 * IPI all online CPUs so that they undergo a context synchronization
+	 * event and are forced to refetch the new instructions.
+	 */
+
+	/*
+	 * KGDB performs cache maintenance with interrupts disabled, so we
+	 * will deadlock trying to IPI the secondary CPUs. In theory, we can
+	 * set CACHE_FLUSH_IS_SAFE to 0 to avoid this known issue, but that
+	 * just means that KGDB will elide the maintenance altogether! As it
+	 * turns out, KGDB uses IPIs to round-up the secondary CPUs during
+	 * the patching operation, so we don't need extra IPIs here anyway.
+	 * In which case, add a KGDB-specific bodge and return early.
+	 */
+	if (in_dbg_master())
+		return;
+
+	kick_all_cpus_sync();
+}
+#define flush_icache_range flush_icache_range
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+extern void copy_to_user_page(struct vm_area_struct *, struct page *,
+	unsigned long, void *, const void *, unsigned long);
+#define copy_to_user_page copy_to_user_page
+
+/*
+ * flush_dcache_folio is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page *);
+void flush_dcache_folio(struct folio *);
+#define flush_dcache_folio flush_dcache_folio
+
+static __always_inline void icache_inval_all_pou(void)
+{
+	if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC))
+		return;
+
+	asm("ic	ialluis");
+	dsb(ish);
+}
+
+#include <asm-generic/cacheflush.h>
+
+#endif /* __ASM_CACHEFLUSH_H */
diff --git a/arch/arm64/include/asm/checksum.h b/arch/arm64/include/asm/checksum.h
new file mode 100644
index 000000000..dc52b7336
--- /dev/null
+++ b/arch/arm64/include/asm/checksum.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ */
+#ifndef __ASM_CHECKSUM_H
+#define __ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+#define _HAVE_ARCH_IPV6_CSUM
+__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+			const struct in6_addr *daddr,
+			__u32 len, __u8 proto, __wsum sum);
+
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum += (sum >> 16) | (sum << 16);
+	return ~(__force __sum16)(sum >> 16);
+}
+#define csum_fold csum_fold
+
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	__uint128_t tmp;
+	u64 sum;
+	int n = ihl; /* we want it signed */
+
+	tmp = *(const __uint128_t *)iph;
+	iph += 16;
+	n -= 4;
+	tmp += ((tmp >> 64) | (tmp << 64));
+	sum = tmp >> 64;
+	do {
+		sum += *(const u32 *)iph;
+		iph += 4;
+	} while (--n > 0);
+
+	sum += ((sum >> 32) | (sum << 32));
+	return csum_fold((__force __wsum)(sum >> 32));
+}
+#define ip_fast_csum ip_fast_csum
+
+extern unsigned int do_csum(const unsigned char *buff, int len);
+#define do_csum do_csum
+
+#include <asm-generic/checksum.h>
+
+#endif	/* __ASM_CHECKSUM_H */
diff --git a/arch/arm64/include/asm/clocksource.h b/arch/arm64/include/asm/clocksource.h
new file mode 100644
index 000000000..482185566
--- /dev/null
+++ b/arch/arm64/include/asm/clocksource.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_CLOCKSOURCE_H
+#define _ASM_CLOCKSOURCE_H
+
+#include <asm/vdso/clocksource.h>
+
+#endif
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
new file mode 100644
index 000000000..d7a540736
--- /dev/null
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -0,0 +1,264 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/cmpxchg.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_CMPXCHG_H
+#define __ASM_CMPXCHG_H
+
+#include <linux/build_bug.h>
+#include <linux/compiler.h>
+
+#include <asm/barrier.h>
+#include <asm/lse.h>
+
+/*
+ * We need separate acquire parameters for ll/sc and lse, since the full
+ * barrier case is generated as release+dmb for the former and
+ * acquire+release for the latter.
+ */
+#define __XCHG_CASE(w, sfx, name, sz, mb, nop_lse, acq, acq_lse, rel, cl)	\
+static inline u##sz __xchg_case_##name##sz(u##sz x, volatile void *ptr)		\
+{										\
+	u##sz ret;								\
+	unsigned long tmp;							\
+										\
+	asm volatile(ARM64_LSE_ATOMIC_INSN(					\
+	/* LL/SC */								\
+	"	prfm	pstl1strm, %2\n"					\
+	"1:	ld" #acq "xr" #sfx "\t%" #w "0, %2\n"				\
+	"	st" #rel "xr" #sfx "\t%w1, %" #w "3, %2\n"			\
+	"	cbnz	%w1, 1b\n"						\
+	"	" #mb,								\
+	/* LSE atomics */							\
+	"	swp" #acq_lse #rel #sfx "\t%" #w "3, %" #w "0, %2\n"		\
+		__nops(3)							\
+	"	" #nop_lse)							\
+	: "=&r" (ret), "=&r" (tmp), "+Q" (*(u##sz *)ptr)			\
+	: "r" (x)								\
+	: cl);									\
+										\
+	return ret;								\
+}
+
+__XCHG_CASE(w, b,     ,  8,        ,    ,  ,  ,  ,         )
+__XCHG_CASE(w, h,     , 16,        ,    ,  ,  ,  ,         )
+__XCHG_CASE(w,  ,     , 32,        ,    ,  ,  ,  ,         )
+__XCHG_CASE( ,  ,     , 64,        ,    ,  ,  ,  ,         )
+__XCHG_CASE(w, b, acq_,  8,        ,    , a, a,  , "memory")
+__XCHG_CASE(w, h, acq_, 16,        ,    , a, a,  , "memory")
+__XCHG_CASE(w,  , acq_, 32,        ,    , a, a,  , "memory")
+__XCHG_CASE( ,  , acq_, 64,        ,    , a, a,  , "memory")
+__XCHG_CASE(w, b, rel_,  8,        ,    ,  ,  , l, "memory")
+__XCHG_CASE(w, h, rel_, 16,        ,    ,  ,  , l, "memory")
+__XCHG_CASE(w,  , rel_, 32,        ,    ,  ,  , l, "memory")
+__XCHG_CASE( ,  , rel_, 64,        ,    ,  ,  , l, "memory")
+__XCHG_CASE(w, b,  mb_,  8, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE(w, h,  mb_, 16, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE(w,  ,  mb_, 32, dmb ish, nop,  , a, l, "memory")
+__XCHG_CASE( ,  ,  mb_, 64, dmb ish, nop,  , a, l, "memory")
+
+#undef __XCHG_CASE
+
+#define __XCHG_GEN(sfx)							\
+static __always_inline unsigned long					\
+__arch_xchg##sfx(unsigned long x, volatile void *ptr, int size)		\
+{									\
+	switch (size) {							\
+	case 1:								\
+		return __xchg_case##sfx##_8(x, ptr);			\
+	case 2:								\
+		return __xchg_case##sfx##_16(x, ptr);			\
+	case 4:								\
+		return __xchg_case##sfx##_32(x, ptr);			\
+	case 8:								\
+		return __xchg_case##sfx##_64(x, ptr);			\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+									\
+	unreachable();							\
+}
+
+__XCHG_GEN()
+__XCHG_GEN(_acq)
+__XCHG_GEN(_rel)
+__XCHG_GEN(_mb)
+
+#undef __XCHG_GEN
+
+#define __xchg_wrapper(sfx, ptr, x)					\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__ret = (__typeof__(*(ptr)))					\
+		__arch_xchg##sfx((unsigned long)(x), (ptr), sizeof(*(ptr))); \
+	__ret;								\
+})
+
+/* xchg */
+#define arch_xchg_relaxed(...)	__xchg_wrapper(    , __VA_ARGS__)
+#define arch_xchg_acquire(...)	__xchg_wrapper(_acq, __VA_ARGS__)
+#define arch_xchg_release(...)	__xchg_wrapper(_rel, __VA_ARGS__)
+#define arch_xchg(...)		__xchg_wrapper( _mb, __VA_ARGS__)
+
+#define __CMPXCHG_CASE(name, sz)			\
+static inline u##sz __cmpxchg_case_##name##sz(volatile void *ptr,	\
+					      u##sz old,		\
+					      u##sz new)		\
+{									\
+	return __lse_ll_sc_body(_cmpxchg_case_##name##sz,		\
+				ptr, old, new);				\
+}
+
+__CMPXCHG_CASE(    ,  8)
+__CMPXCHG_CASE(    , 16)
+__CMPXCHG_CASE(    , 32)
+__CMPXCHG_CASE(    , 64)
+__CMPXCHG_CASE(acq_,  8)
+__CMPXCHG_CASE(acq_, 16)
+__CMPXCHG_CASE(acq_, 32)
+__CMPXCHG_CASE(acq_, 64)
+__CMPXCHG_CASE(rel_,  8)
+__CMPXCHG_CASE(rel_, 16)
+__CMPXCHG_CASE(rel_, 32)
+__CMPXCHG_CASE(rel_, 64)
+__CMPXCHG_CASE(mb_,  8)
+__CMPXCHG_CASE(mb_, 16)
+__CMPXCHG_CASE(mb_, 32)
+__CMPXCHG_CASE(mb_, 64)
+
+#undef __CMPXCHG_CASE
+
+#define __CMPXCHG128(name)						\
+static inline u128 __cmpxchg128##name(volatile u128 *ptr,		\
+				      u128 old, u128 new)		\
+{									\
+	return __lse_ll_sc_body(_cmpxchg128##name,			\
+				ptr, old, new);				\
+}
+
+__CMPXCHG128(   )
+__CMPXCHG128(_mb)
+
+#undef __CMPXCHG128
+
+#define __CMPXCHG_GEN(sfx)						\
+static __always_inline unsigned long __cmpxchg##sfx(volatile void *ptr,	\
+					   unsigned long old,		\
+					   unsigned long new,		\
+					   int size)			\
+{									\
+	switch (size) {							\
+	case 1:								\
+		return __cmpxchg_case##sfx##_8(ptr, old, new);		\
+	case 2:								\
+		return __cmpxchg_case##sfx##_16(ptr, old, new);		\
+	case 4:								\
+		return __cmpxchg_case##sfx##_32(ptr, old, new);		\
+	case 8:								\
+		return __cmpxchg_case##sfx##_64(ptr, old, new);		\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+									\
+	unreachable();							\
+}
+
+__CMPXCHG_GEN()
+__CMPXCHG_GEN(_acq)
+__CMPXCHG_GEN(_rel)
+__CMPXCHG_GEN(_mb)
+
+#undef __CMPXCHG_GEN
+
+#define __cmpxchg_wrapper(sfx, ptr, o, n)				\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__ret = (__typeof__(*(ptr)))					\
+		__cmpxchg##sfx((ptr), (unsigned long)(o),		\
+				(unsigned long)(n), sizeof(*(ptr)));	\
+	__ret;								\
+})
+
+/* cmpxchg */
+#define arch_cmpxchg_relaxed(...)	__cmpxchg_wrapper(    , __VA_ARGS__)
+#define arch_cmpxchg_acquire(...)	__cmpxchg_wrapper(_acq, __VA_ARGS__)
+#define arch_cmpxchg_release(...)	__cmpxchg_wrapper(_rel, __VA_ARGS__)
+#define arch_cmpxchg(...)		__cmpxchg_wrapper( _mb, __VA_ARGS__)
+#define arch_cmpxchg_local		arch_cmpxchg_relaxed
+
+/* cmpxchg64 */
+#define arch_cmpxchg64_relaxed		arch_cmpxchg_relaxed
+#define arch_cmpxchg64_acquire		arch_cmpxchg_acquire
+#define arch_cmpxchg64_release		arch_cmpxchg_release
+#define arch_cmpxchg64			arch_cmpxchg
+#define arch_cmpxchg64_local		arch_cmpxchg_local
+
+/* cmpxchg128 */
+#define system_has_cmpxchg128()		1
+
+#define arch_cmpxchg128(ptr, o, n)						\
+({										\
+	__cmpxchg128_mb((ptr), (o), (n));					\
+})
+
+#define arch_cmpxchg128_local(ptr, o, n)					\
+({										\
+	__cmpxchg128((ptr), (o), (n));						\
+})
+
+#define __CMPWAIT_CASE(w, sfx, sz)					\
+static inline void __cmpwait_case_##sz(volatile void *ptr,		\
+				       unsigned long val)		\
+{									\
+	unsigned long tmp;						\
+									\
+	asm volatile(							\
+	"	sevl\n"							\
+	"	wfe\n"							\
+	"	ldxr" #sfx "\t%" #w "[tmp], %[v]\n"			\
+	"	eor	%" #w "[tmp], %" #w "[tmp], %" #w "[val]\n"	\
+	"	cbnz	%" #w "[tmp], 1f\n"				\
+	"	wfe\n"							\
+	"1:"								\
+	: [tmp] "=&r" (tmp), [v] "+Q" (*(u##sz *)ptr)			\
+	: [val] "r" (val));						\
+}
+
+__CMPWAIT_CASE(w, b, 8);
+__CMPWAIT_CASE(w, h, 16);
+__CMPWAIT_CASE(w,  , 32);
+__CMPWAIT_CASE( ,  , 64);
+
+#undef __CMPWAIT_CASE
+
+#define __CMPWAIT_GEN(sfx)						\
+static __always_inline void __cmpwait##sfx(volatile void *ptr,		\
+				  unsigned long val,			\
+				  int size)				\
+{									\
+	switch (size) {							\
+	case 1:								\
+		return __cmpwait_case##sfx##_8(ptr, (u8)val);		\
+	case 2:								\
+		return __cmpwait_case##sfx##_16(ptr, (u16)val);		\
+	case 4:								\
+		return __cmpwait_case##sfx##_32(ptr, val);		\
+	case 8:								\
+		return __cmpwait_case##sfx##_64(ptr, val);		\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+									\
+	unreachable();							\
+}
+
+__CMPWAIT_GEN()
+
+#undef __CMPWAIT_GEN
+
+#define __cmpwait_relaxed(ptr, val) \
+	__cmpwait((ptr), (unsigned long)(val), sizeof(*(ptr)))
+
+#endif	/* __ASM_CMPXCHG_H */
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
new file mode 100644
index 000000000..ae904a1ad
--- /dev/null
+++ b/arch/arm64/include/asm/compat.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_COMPAT_H
+#define __ASM_COMPAT_H
+
+#define compat_mode_t compat_mode_t
+typedef u16		compat_mode_t;
+
+#define __compat_uid_t	__compat_uid_t
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+
+#define compat_ipc_pid_t compat_ipc_pid_t
+typedef u16		compat_ipc_pid_t;
+
+#define compat_statfs	compat_statfs
+
+#include <asm-generic/compat.h>
+
+#ifdef CONFIG_COMPAT
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+
+#ifdef __AARCH64EB__
+#define COMPAT_UTS_MACHINE	"armv8b\0\0"
+#else
+#define COMPAT_UTS_MACHINE	"armv8l\0\0"
+#endif
+
+typedef u16		__compat_uid16_t;
+typedef u16		__compat_gid16_t;
+typedef s32		compat_nlink_t;
+
+struct compat_stat {
+#ifdef __AARCH64EB__
+	short		st_dev;
+	short		__pad1;
+#else
+	compat_dev_t	st_dev;
+#endif
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_ushort_t	st_nlink;
+	__compat_uid16_t	st_uid;
+	__compat_gid16_t	st_gid;
+#ifdef __AARCH64EB__
+	short		st_rdev;
+	short		__pad2;
+#else
+	compat_dev_t	st_rdev;
+#endif
+	compat_off_t	st_size;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	old_time32_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+	old_time32_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+	old_time32_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+	compat_ulong_t	__unused4[2];
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_flags;
+	int		f_spare[4];
+};
+
+#define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
+#define COMPAT_MINSIGSTKSZ	2048
+
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
+static inline int is_compat_thread(struct thread_info *thread)
+{
+	return test_ti_thread_flag(thread, TIF_32BIT);
+}
+
+long compat_arm_syscall(struct pt_regs *regs, int scno);
+
+#else /* !CONFIG_COMPAT */
+
+static inline int is_compat_thread(struct thread_info *thread)
+{
+	return 0;
+}
+
+#endif /* CONFIG_COMPAT */
+#endif /* __ASM_COMPAT_H */
diff --git a/arch/arm64/include/asm/compiler.h b/arch/arm64/include/asm/compiler.h
new file mode 100644
index 000000000..9bbd7b709
--- /dev/null
+++ b/arch/arm64/include/asm/compiler.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_COMPILER_H
+#define __ASM_COMPILER_H
+
+#ifdef ARM64_ASM_ARCH
+#define ARM64_ASM_PREAMBLE ".arch " ARM64_ASM_ARCH "\n"
+#else
+#define ARM64_ASM_PREAMBLE
+#endif
+
+#define xpaclri(ptr)							\
+({									\
+	register unsigned long __xpaclri_ptr asm("x30") = (ptr);	\
+									\
+	asm(								\
+	ARM64_ASM_PREAMBLE						\
+	"	hint	#7\n"						\
+	: "+r" (__xpaclri_ptr));					\
+									\
+	__xpaclri_ptr;							\
+})
+
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+#define ptrauth_strip_kernel_insn_pac(ptr)	xpaclri(ptr)
+#else
+#define ptrauth_strip_kernel_insn_pac(ptr)	(ptr)
+#endif
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+#define ptrauth_strip_user_insn_pac(ptr)	xpaclri(ptr)
+#else
+#define ptrauth_strip_user_insn_pac(ptr)	(ptr)
+#endif
+
+#if !defined(CONFIG_BUILTIN_RETURN_ADDRESS_STRIPS_PAC)
+#define __builtin_return_address(val)					\
+	(void *)(ptrauth_strip_kernel_insn_pac((unsigned long)__builtin_return_address(val)))
+#endif
+
+#endif /* __ASM_COMPILER_H */
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
new file mode 100644
index 000000000..e749838b9
--- /dev/null
+++ b/arch/arm64/include/asm/cpu.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+  * Copyright (C) 2014 ARM Ltd.
+ */
+#ifndef __ASM_CPU_H
+#define __ASM_CPU_H
+
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+
+/*
+ * Records attributes of an individual CPU.
+ */
+struct cpuinfo_32bit {
+	u32		reg_id_dfr0;
+	u32		reg_id_dfr1;
+	u32		reg_id_isar0;
+	u32		reg_id_isar1;
+	u32		reg_id_isar2;
+	u32		reg_id_isar3;
+	u32		reg_id_isar4;
+	u32		reg_id_isar5;
+	u32		reg_id_isar6;
+	u32		reg_id_mmfr0;
+	u32		reg_id_mmfr1;
+	u32		reg_id_mmfr2;
+	u32		reg_id_mmfr3;
+	u32		reg_id_mmfr4;
+	u32		reg_id_mmfr5;
+	u32		reg_id_pfr0;
+	u32		reg_id_pfr1;
+	u32		reg_id_pfr2;
+
+	u32		reg_mvfr0;
+	u32		reg_mvfr1;
+	u32		reg_mvfr2;
+};
+
+struct cpuinfo_arm64 {
+	struct cpu	cpu;
+	struct kobject	kobj;
+	u64		reg_ctr;
+	u64		reg_cntfrq;
+	u64		reg_dczid;
+	u64		reg_midr;
+	u64		reg_revidr;
+	u64		reg_gmid;
+	u64		reg_smidr;
+
+	u64		reg_id_aa64dfr0;
+	u64		reg_id_aa64dfr1;
+	u64		reg_id_aa64isar0;
+	u64		reg_id_aa64isar1;
+	u64		reg_id_aa64isar2;
+	u64		reg_id_aa64mmfr0;
+	u64		reg_id_aa64mmfr1;
+	u64		reg_id_aa64mmfr2;
+	u64		reg_id_aa64mmfr3;
+	u64		reg_id_aa64pfr0;
+	u64		reg_id_aa64pfr1;
+	u64		reg_id_aa64zfr0;
+	u64		reg_id_aa64smfr0;
+
+	struct cpuinfo_32bit	aarch32;
+
+	/* pseudo-ZCR for recording maximum ZCR_EL1 LEN value: */
+	u64		reg_zcr;
+
+	/* pseudo-SMCR for recording maximum SMCR_EL1 LEN value: */
+	u64		reg_smcr;
+};
+
+DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);
+
+void cpuinfo_store_cpu(void);
+void __init cpuinfo_store_boot_cpu(void);
+
+void __init init_cpu_features(struct cpuinfo_arm64 *info);
+void update_cpu_features(int cpu, struct cpuinfo_arm64 *info,
+				 struct cpuinfo_arm64 *boot);
+
+#endif /* __ASM_CPU_H */
diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h
new file mode 100644
index 000000000..a444c8915
--- /dev/null
+++ b/arch/arm64/include/asm/cpu_ops.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ */
+#ifndef __ASM_CPU_OPS_H
+#define __ASM_CPU_OPS_H
+
+#include <linux/init.h>
+#include <linux/threads.h>
+
+/**
+ * struct cpu_operations - Callback operations for hotplugging CPUs.
+ *
+ * @name:	Name of the property as appears in a devicetree cpu node's
+ *		enable-method property. On systems booting with ACPI, @name
+ *		identifies the struct cpu_operations entry corresponding to
+ *		the boot protocol specified in the ACPI MADT table.
+ * @cpu_init:	Reads any data necessary for a specific enable-method for a
+ *		proposed logical id.
+ * @cpu_prepare: Early one-time preparation step for a cpu. If there is a
+ *		mechanism for doing so, tests whether it is possible to boot
+ *		the given CPU.
+ * @cpu_boot:	Boots a cpu into the kernel.
+ * @cpu_postboot: Optionally, perform any post-boot cleanup or necessary
+ *		synchronisation. Called from the cpu being booted.
+ * @cpu_can_disable: Determines whether a CPU can be disabled based on
+ *		mechanism-specific information.
+ * @cpu_disable: Prepares a cpu to die. May fail for some mechanism-specific
+ * 		reason, which will cause the hot unplug to be aborted. Called
+ * 		from the cpu to be killed.
+ * @cpu_die:	Makes a cpu leave the kernel. Must not fail. Called from the
+ *		cpu being killed.
+ * @cpu_kill:  Ensures a cpu has left the kernel. Called from another cpu.
+ */
+struct cpu_operations {
+	const char	*name;
+	int		(*cpu_init)(unsigned int);
+	int		(*cpu_prepare)(unsigned int);
+	int		(*cpu_boot)(unsigned int);
+	void		(*cpu_postboot)(void);
+#ifdef CONFIG_HOTPLUG_CPU
+	bool		(*cpu_can_disable)(unsigned int cpu);
+	int		(*cpu_disable)(unsigned int cpu);
+	void		(*cpu_die)(unsigned int cpu);
+	int		(*cpu_kill)(unsigned int cpu);
+#endif
+};
+
+int __init init_cpu_ops(int cpu);
+extern const struct cpu_operations *get_cpu_ops(int cpu);
+
+static inline void __init init_bootcpu_ops(void)
+{
+	init_cpu_ops(0);
+}
+
+#endif /* ifndef __ASM_CPU_OPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
new file mode 100644
index 000000000..5bba39376
--- /dev/null
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -0,0 +1,929 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#ifndef __ASM_CPUFEATURE_H
+#define __ASM_CPUFEATURE_H
+
+#include <asm/alternative-macros.h>
+#include <asm/cpucaps.h>
+#include <asm/cputype.h>
+#include <asm/hwcap.h>
+#include <asm/sysreg.h>
+
+#define MAX_CPU_FEATURES	128
+#define cpu_feature(x)		KERNEL_HWCAP_ ## x
+
+#define ARM64_SW_FEATURE_OVERRIDE_NOKASLR	0
+#define ARM64_SW_FEATURE_OVERRIDE_HVHE		4
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bug.h>
+#include <linux/jump_label.h>
+#include <linux/kernel.h>
+
+/*
+ * CPU feature register tracking
+ *
+ * The safe value of a CPUID feature field is dependent on the implications
+ * of the values assigned to it by the architecture. Based on the relationship
+ * between the values, the features are classified into 3 types - LOWER_SAFE,
+ * HIGHER_SAFE and EXACT.
+ *
+ * The lowest value of all the CPUs is chosen for LOWER_SAFE and highest
+ * for HIGHER_SAFE. It is expected that all CPUs have the same value for
+ * a field when EXACT is specified, failing which, the safe value specified
+ * in the table is chosen.
+ */
+
+enum ftr_type {
+	FTR_EXACT,			/* Use a predefined safe value */
+	FTR_LOWER_SAFE,			/* Smaller value is safe */
+	FTR_HIGHER_SAFE,		/* Bigger value is safe */
+	FTR_HIGHER_OR_ZERO_SAFE,	/* Bigger value is safe, but 0 is biggest */
+};
+
+#define FTR_STRICT	true	/* SANITY check strict matching required */
+#define FTR_NONSTRICT	false	/* SANITY check ignored */
+
+#define FTR_SIGNED	true	/* Value should be treated as signed */
+#define FTR_UNSIGNED	false	/* Value should be treated as unsigned */
+
+#define FTR_VISIBLE	true	/* Feature visible to the user space */
+#define FTR_HIDDEN	false	/* Feature is hidden from the user */
+
+#define FTR_VISIBLE_IF_IS_ENABLED(config)		\
+	(IS_ENABLED(config) ? FTR_VISIBLE : FTR_HIDDEN)
+
+struct arm64_ftr_bits {
+	bool		sign;	/* Value is signed ? */
+	bool		visible;
+	bool		strict;	/* CPU Sanity check: strict matching required ? */
+	enum ftr_type	type;
+	u8		shift;
+	u8		width;
+	s64		safe_val; /* safe value for FTR_EXACT features */
+};
+
+/*
+ * Describe the early feature override to the core override code:
+ *
+ * @val			Values that are to be merged into the final
+ *			sanitised value of the register. Only the bitfields
+ *			set to 1 in @mask are valid
+ * @mask		Mask of the features that are overridden by @val
+ *
+ * A @mask field set to full-1 indicates that the corresponding field
+ * in @val is a valid override.
+ *
+ * A @mask field set to full-0 with the corresponding @val field set
+ * to full-0 denotes that this field has no override
+ *
+ * A @mask field set to full-0 with the corresponding @val field set
+ * to full-1 denotes thath this field has an invalid override.
+ */
+struct arm64_ftr_override {
+	u64		val;
+	u64		mask;
+};
+
+/*
+ * @arm64_ftr_reg - Feature register
+ * @strict_mask		Bits which should match across all CPUs for sanity.
+ * @sys_val		Safe value across the CPUs (system view)
+ */
+struct arm64_ftr_reg {
+	const char			*name;
+	u64				strict_mask;
+	u64				user_mask;
+	u64				sys_val;
+	u64				user_val;
+	struct arm64_ftr_override	*override;
+	const struct arm64_ftr_bits	*ftr_bits;
+};
+
+extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;
+
+/*
+ * CPU capabilities:
+ *
+ * We use arm64_cpu_capabilities to represent system features, errata work
+ * arounds (both used internally by kernel and tracked in system_cpucaps) and
+ * ELF HWCAPs (which are exposed to user).
+ *
+ * To support systems with heterogeneous CPUs, we need to make sure that we
+ * detect the capabilities correctly on the system and take appropriate
+ * measures to ensure there are no incompatibilities.
+ *
+ * This comment tries to explain how we treat the capabilities.
+ * Each capability has the following list of attributes :
+ *
+ * 1) Scope of Detection : The system detects a given capability by
+ *    performing some checks at runtime. This could be, e.g, checking the
+ *    value of a field in CPU ID feature register or checking the cpu
+ *    model. The capability provides a call back ( @matches() ) to
+ *    perform the check. Scope defines how the checks should be performed.
+ *    There are three cases:
+ *
+ *     a) SCOPE_LOCAL_CPU: check all the CPUs and "detect" if at least one
+ *        matches. This implies, we have to run the check on all the
+ *        booting CPUs, until the system decides that state of the
+ *        capability is finalised. (See section 2 below)
+ *		Or
+ *     b) SCOPE_SYSTEM: check all the CPUs and "detect" if all the CPUs
+ *        matches. This implies, we run the check only once, when the
+ *        system decides to finalise the state of the capability. If the
+ *        capability relies on a field in one of the CPU ID feature
+ *        registers, we use the sanitised value of the register from the
+ *        CPU feature infrastructure to make the decision.
+ *		Or
+ *     c) SCOPE_BOOT_CPU: Check only on the primary boot CPU to detect the
+ *        feature. This category is for features that are "finalised"
+ *        (or used) by the kernel very early even before the SMP cpus
+ *        are brought up.
+ *
+ *    The process of detection is usually denoted by "update" capability
+ *    state in the code.
+ *
+ * 2) Finalise the state : The kernel should finalise the state of a
+ *    capability at some point during its execution and take necessary
+ *    actions if any. Usually, this is done, after all the boot-time
+ *    enabled CPUs are brought up by the kernel, so that it can make
+ *    better decision based on the available set of CPUs. However, there
+ *    are some special cases, where the action is taken during the early
+ *    boot by the primary boot CPU. (e.g, running the kernel at EL2 with
+ *    Virtualisation Host Extensions). The kernel usually disallows any
+ *    changes to the state of a capability once it finalises the capability
+ *    and takes any action, as it may be impossible to execute the actions
+ *    safely. A CPU brought up after a capability is "finalised" is
+ *    referred to as "Late CPU" w.r.t the capability. e.g, all secondary
+ *    CPUs are treated "late CPUs" for capabilities determined by the boot
+ *    CPU.
+ *
+ *    At the moment there are two passes of finalising the capabilities.
+ *      a) Boot CPU scope capabilities - Finalised by primary boot CPU via
+ *         setup_boot_cpu_capabilities().
+ *      b) Everything except (a) - Run via setup_system_capabilities().
+ *
+ * 3) Verification: When a CPU is brought online (e.g, by user or by the
+ *    kernel), the kernel should make sure that it is safe to use the CPU,
+ *    by verifying that the CPU is compliant with the state of the
+ *    capabilities finalised already. This happens via :
+ *
+ *	secondary_start_kernel()-> check_local_cpu_capabilities()
+ *
+ *    As explained in (2) above, capabilities could be finalised at
+ *    different points in the execution. Each newly booted CPU is verified
+ *    against the capabilities that have been finalised by the time it
+ *    boots.
+ *
+ *	a) SCOPE_BOOT_CPU : All CPUs are verified against the capability
+ *	except for the primary boot CPU.
+ *
+ *	b) SCOPE_LOCAL_CPU, SCOPE_SYSTEM: All CPUs hotplugged on by the
+ *	user after the kernel boot are verified against the capability.
+ *
+ *    If there is a conflict, the kernel takes an action, based on the
+ *    severity (e.g, a CPU could be prevented from booting or cause a
+ *    kernel panic). The CPU is allowed to "affect" the state of the
+ *    capability, if it has not been finalised already. See section 5
+ *    for more details on conflicts.
+ *
+ * 4) Action: As mentioned in (2), the kernel can take an action for each
+ *    detected capability, on all CPUs on the system. Appropriate actions
+ *    include, turning on an architectural feature, modifying the control
+ *    registers (e.g, SCTLR, TCR etc.) or patching the kernel via
+ *    alternatives. The kernel patching is batched and performed at later
+ *    point. The actions are always initiated only after the capability
+ *    is finalised. This is usally denoted by "enabling" the capability.
+ *    The actions are initiated as follows :
+ *	a) Action is triggered on all online CPUs, after the capability is
+ *	finalised, invoked within the stop_machine() context from
+ *	enable_cpu_capabilitie().
+ *
+ *	b) Any late CPU, brought up after (1), the action is triggered via:
+ *
+ *	  check_local_cpu_capabilities() -> verify_local_cpu_capabilities()
+ *
+ * 5) Conflicts: Based on the state of the capability on a late CPU vs.
+ *    the system state, we could have the following combinations :
+ *
+ *		x-----------------------------x
+ *		| Type  | System   | Late CPU |
+ *		|-----------------------------|
+ *		|  a    |   y      |    n     |
+ *		|-----------------------------|
+ *		|  b    |   n      |    y     |
+ *		x-----------------------------x
+ *
+ *     Two separate flag bits are defined to indicate whether each kind of
+ *     conflict can be allowed:
+ *		ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU - Case(a) is allowed
+ *		ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU - Case(b) is allowed
+ *
+ *     Case (a) is not permitted for a capability that the system requires
+ *     all CPUs to have in order for the capability to be enabled. This is
+ *     typical for capabilities that represent enhanced functionality.
+ *
+ *     Case (b) is not permitted for a capability that must be enabled
+ *     during boot if any CPU in the system requires it in order to run
+ *     safely. This is typical for erratum work arounds that cannot be
+ *     enabled after the corresponding capability is finalised.
+ *
+ *     In some non-typical cases either both (a) and (b), or neither,
+ *     should be permitted. This can be described by including neither
+ *     or both flags in the capability's type field.
+ *
+ *     In case of a conflict, the CPU is prevented from booting. If the
+ *     ARM64_CPUCAP_PANIC_ON_CONFLICT flag is specified for the capability,
+ *     then a kernel panic is triggered.
+ */
+
+
+/*
+ * Decide how the capability is detected.
+ * On any local CPU vs System wide vs the primary boot CPU
+ */
+#define ARM64_CPUCAP_SCOPE_LOCAL_CPU		((u16)BIT(0))
+#define ARM64_CPUCAP_SCOPE_SYSTEM		((u16)BIT(1))
+/*
+ * The capabilitiy is detected on the Boot CPU and is used by kernel
+ * during early boot. i.e, the capability should be "detected" and
+ * "enabled" as early as possibly on all booting CPUs.
+ */
+#define ARM64_CPUCAP_SCOPE_BOOT_CPU		((u16)BIT(2))
+#define ARM64_CPUCAP_SCOPE_MASK			\
+	(ARM64_CPUCAP_SCOPE_SYSTEM	|	\
+	 ARM64_CPUCAP_SCOPE_LOCAL_CPU	|	\
+	 ARM64_CPUCAP_SCOPE_BOOT_CPU)
+
+#define SCOPE_SYSTEM				ARM64_CPUCAP_SCOPE_SYSTEM
+#define SCOPE_LOCAL_CPU				ARM64_CPUCAP_SCOPE_LOCAL_CPU
+#define SCOPE_BOOT_CPU				ARM64_CPUCAP_SCOPE_BOOT_CPU
+#define SCOPE_ALL				ARM64_CPUCAP_SCOPE_MASK
+
+/*
+ * Is it permitted for a late CPU to have this capability when system
+ * hasn't already enabled it ?
+ */
+#define ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU	((u16)BIT(4))
+/* Is it safe for a late CPU to miss this capability when system has it */
+#define ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU	((u16)BIT(5))
+/* Panic when a conflict is detected */
+#define ARM64_CPUCAP_PANIC_ON_CONFLICT		((u16)BIT(6))
+
+/*
+ * CPU errata workarounds that need to be enabled at boot time if one or
+ * more CPUs in the system requires it. When one of these capabilities
+ * has been enabled, it is safe to allow any CPU to boot that doesn't
+ * require the workaround. However, it is not safe if a "late" CPU
+ * requires a workaround and the system hasn't enabled it already.
+ */
+#define ARM64_CPUCAP_LOCAL_CPU_ERRATUM		\
+	(ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
+/*
+ * CPU feature detected at boot time based on system-wide value of a
+ * feature. It is safe for a late CPU to have this feature even though
+ * the system hasn't enabled it, although the feature will not be used
+ * by Linux in this case. If the system has enabled this feature already,
+ * then every late CPU must have it.
+ */
+#define ARM64_CPUCAP_SYSTEM_FEATURE	\
+	(ARM64_CPUCAP_SCOPE_SYSTEM | ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU)
+/*
+ * CPU feature detected at boot time based on feature of one or more CPUs.
+ * All possible conflicts for a late CPU are ignored.
+ * NOTE: this means that a late CPU with the feature will *not* cause the
+ * capability to be advertised by cpus_have_*cap()!
+ */
+#define ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE		\
+	(ARM64_CPUCAP_SCOPE_LOCAL_CPU		|	\
+	 ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU	|	\
+	 ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU)
+
+/*
+ * CPU feature detected at boot time, on one or more CPUs. A late CPU
+ * is not allowed to have the capability when the system doesn't have it.
+ * It is Ok for a late CPU to miss the feature.
+ */
+#define ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE	\
+	(ARM64_CPUCAP_SCOPE_LOCAL_CPU		|	\
+	 ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
+
+/*
+ * CPU feature used early in the boot based on the boot CPU. All secondary
+ * CPUs must match the state of the capability as detected by the boot CPU. In
+ * case of a conflict, a kernel panic is triggered.
+ */
+#define ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE		\
+	(ARM64_CPUCAP_SCOPE_BOOT_CPU | ARM64_CPUCAP_PANIC_ON_CONFLICT)
+
+/*
+ * CPU feature used early in the boot based on the boot CPU. It is safe for a
+ * late CPU to have this feature even though the boot CPU hasn't enabled it,
+ * although the feature will not be used by Linux in this case. If the boot CPU
+ * has enabled this feature already, then every late CPU must have it.
+ */
+#define ARM64_CPUCAP_BOOT_CPU_FEATURE                  \
+	(ARM64_CPUCAP_SCOPE_BOOT_CPU | ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU)
+
+struct arm64_cpu_capabilities {
+	const char *desc;
+	u16 capability;
+	u16 type;
+	bool (*matches)(const struct arm64_cpu_capabilities *caps, int scope);
+	/*
+	 * Take the appropriate actions to configure this capability
+	 * for this CPU. If the capability is detected by the kernel
+	 * this will be called on all the CPUs in the system,
+	 * including the hotplugged CPUs, regardless of whether the
+	 * capability is available on that specific CPU. This is
+	 * useful for some capabilities (e.g, working around CPU
+	 * errata), where all the CPUs must take some action (e.g,
+	 * changing system control/configuration). Thus, if an action
+	 * is required only if the CPU has the capability, then the
+	 * routine must check it before taking any action.
+	 */
+	void (*cpu_enable)(const struct arm64_cpu_capabilities *cap);
+	union {
+		struct {	/* To be used for erratum handling only */
+			struct midr_range midr_range;
+			const struct arm64_midr_revidr {
+				u32 midr_rv;		/* revision/variant */
+				u32 revidr_mask;
+			} * const fixed_revs;
+		};
+
+		const struct midr_range *midr_range_list;
+		struct {	/* Feature register checking */
+			u32 sys_reg;
+			u8 field_pos;
+			u8 field_width;
+			u8 min_field_value;
+			u8 hwcap_type;
+			bool sign;
+			unsigned long hwcap;
+		};
+	};
+
+	/*
+	 * An optional list of "matches/cpu_enable" pair for the same
+	 * "capability" of the same "type" as described by the parent.
+	 * Only matches(), cpu_enable() and fields relevant to these
+	 * methods are significant in the list. The cpu_enable is
+	 * invoked only if the corresponding entry "matches()".
+	 * However, if a cpu_enable() method is associated
+	 * with multiple matches(), care should be taken that either
+	 * the match criteria are mutually exclusive, or that the
+	 * method is robust against being called multiple times.
+	 */
+	const struct arm64_cpu_capabilities *match_list;
+};
+
+static inline int cpucap_default_scope(const struct arm64_cpu_capabilities *cap)
+{
+	return cap->type & ARM64_CPUCAP_SCOPE_MASK;
+}
+
+/*
+ * Generic helper for handling capabilities with multiple (match,enable) pairs
+ * of call backs, sharing the same capability bit.
+ * Iterate over each entry to see if at least one matches.
+ */
+static inline bool
+cpucap_multi_entry_cap_matches(const struct arm64_cpu_capabilities *entry,
+			       int scope)
+{
+	const struct arm64_cpu_capabilities *caps;
+
+	for (caps = entry->match_list; caps->matches; caps++)
+		if (caps->matches(caps, scope))
+			return true;
+
+	return false;
+}
+
+static __always_inline bool is_vhe_hyp_code(void)
+{
+	/* Only defined for code run in VHE hyp context */
+	return __is_defined(__KVM_VHE_HYPERVISOR__);
+}
+
+static __always_inline bool is_nvhe_hyp_code(void)
+{
+	/* Only defined for code run in NVHE hyp context */
+	return __is_defined(__KVM_NVHE_HYPERVISOR__);
+}
+
+static __always_inline bool is_hyp_code(void)
+{
+	return is_vhe_hyp_code() || is_nvhe_hyp_code();
+}
+
+extern DECLARE_BITMAP(system_cpucaps, ARM64_NCAPS);
+
+extern DECLARE_BITMAP(boot_cpucaps, ARM64_NCAPS);
+
+#define for_each_available_cap(cap)		\
+	for_each_set_bit(cap, system_cpucaps, ARM64_NCAPS)
+
+bool this_cpu_has_cap(unsigned int cap);
+void cpu_set_feature(unsigned int num);
+bool cpu_have_feature(unsigned int num);
+unsigned long cpu_get_elf_hwcap(void);
+unsigned long cpu_get_elf_hwcap2(void);
+
+#define cpu_set_named_feature(name) cpu_set_feature(cpu_feature(name))
+#define cpu_have_named_feature(name) cpu_have_feature(cpu_feature(name))
+
+static __always_inline bool system_capabilities_finalized(void)
+{
+	return alternative_has_cap_likely(ARM64_ALWAYS_SYSTEM);
+}
+
+/*
+ * Test for a capability with a runtime check.
+ *
+ * Before the capability is detected, this returns false.
+ */
+static __always_inline bool cpus_have_cap(unsigned int num)
+{
+	if (num >= ARM64_NCAPS)
+		return false;
+	return arch_test_bit(num, system_cpucaps);
+}
+
+/*
+ * Test for a capability without a runtime check.
+ *
+ * Before capabilities are finalized, this returns false.
+ * After capabilities are finalized, this is patched to avoid a runtime check.
+ *
+ * @num must be a compile-time constant.
+ */
+static __always_inline bool __cpus_have_const_cap(int num)
+{
+	if (num >= ARM64_NCAPS)
+		return false;
+	return alternative_has_cap_unlikely(num);
+}
+
+/*
+ * Test for a capability without a runtime check.
+ *
+ * Before capabilities are finalized, this will BUG().
+ * After capabilities are finalized, this is patched to avoid a runtime check.
+ *
+ * @num must be a compile-time constant.
+ */
+static __always_inline bool cpus_have_final_cap(int num)
+{
+	if (system_capabilities_finalized())
+		return __cpus_have_const_cap(num);
+	else
+		BUG();
+}
+
+/*
+ * Test for a capability, possibly with a runtime check for non-hyp code.
+ *
+ * For hyp code, this behaves the same as cpus_have_final_cap().
+ *
+ * For non-hyp code:
+ * Before capabilities are finalized, this behaves as cpus_have_cap().
+ * After capabilities are finalized, this is patched to avoid a runtime check.
+ *
+ * @num must be a compile-time constant.
+ */
+static __always_inline bool cpus_have_const_cap(int num)
+{
+	if (is_hyp_code())
+		return cpus_have_final_cap(num);
+	else if (system_capabilities_finalized())
+		return __cpus_have_const_cap(num);
+	else
+		return cpus_have_cap(num);
+}
+
+static inline int __attribute_const__
+cpuid_feature_extract_signed_field_width(u64 features, int field, int width)
+{
+	return (s64)(features << (64 - width - field)) >> (64 - width);
+}
+
+static inline int __attribute_const__
+cpuid_feature_extract_signed_field(u64 features, int field)
+{
+	return cpuid_feature_extract_signed_field_width(features, field, 4);
+}
+
+static __always_inline unsigned int __attribute_const__
+cpuid_feature_extract_unsigned_field_width(u64 features, int field, int width)
+{
+	return (u64)(features << (64 - width - field)) >> (64 - width);
+}
+
+static __always_inline unsigned int __attribute_const__
+cpuid_feature_extract_unsigned_field(u64 features, int field)
+{
+	return cpuid_feature_extract_unsigned_field_width(features, field, 4);
+}
+
+/*
+ * Fields that identify the version of the Performance Monitors Extension do
+ * not follow the standard ID scheme. See ARM DDI 0487E.a page D13-2825,
+ * "Alternative ID scheme used for the Performance Monitors Extension version".
+ */
+static inline u64 __attribute_const__
+cpuid_feature_cap_perfmon_field(u64 features, int field, u64 cap)
+{
+	u64 val = cpuid_feature_extract_unsigned_field(features, field);
+	u64 mask = GENMASK_ULL(field + 3, field);
+
+	/* Treat IMPLEMENTATION DEFINED functionality as unimplemented */
+	if (val == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
+		val = 0;
+
+	if (val > cap) {
+		features &= ~mask;
+		features |= (cap << field) & mask;
+	}
+
+	return features;
+}
+
+static inline u64 arm64_ftr_mask(const struct arm64_ftr_bits *ftrp)
+{
+	return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
+}
+
+static inline u64 arm64_ftr_reg_user_value(const struct arm64_ftr_reg *reg)
+{
+	return (reg->user_val | (reg->sys_val & reg->user_mask));
+}
+
+static inline int __attribute_const__
+cpuid_feature_extract_field_width(u64 features, int field, int width, bool sign)
+{
+	if (WARN_ON_ONCE(!width))
+		width = 4;
+	return (sign) ?
+		cpuid_feature_extract_signed_field_width(features, field, width) :
+		cpuid_feature_extract_unsigned_field_width(features, field, width);
+}
+
+static inline int __attribute_const__
+cpuid_feature_extract_field(u64 features, int field, bool sign)
+{
+	return cpuid_feature_extract_field_width(features, field, 4, sign);
+}
+
+static inline s64 arm64_ftr_value(const struct arm64_ftr_bits *ftrp, u64 val)
+{
+	return (s64)cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width, ftrp->sign);
+}
+
+static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
+{
+	return cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_BIGEND_SHIFT) == 0x1 ||
+		cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_BIGENDEL0_SHIFT) == 0x1;
+}
+
+static inline bool id_aa64pfr0_32bit_el1(u64 pfr0)
+{
+	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_EL1_SHIFT);
+
+	return val == ID_AA64PFR0_EL1_ELx_32BIT_64BIT;
+}
+
+static inline bool id_aa64pfr0_32bit_el0(u64 pfr0)
+{
+	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_EL0_SHIFT);
+
+	return val == ID_AA64PFR0_EL1_ELx_32BIT_64BIT;
+}
+
+static inline bool id_aa64pfr0_sve(u64 pfr0)
+{
+	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_SVE_SHIFT);
+
+	return val > 0;
+}
+
+static inline bool id_aa64pfr1_sme(u64 pfr1)
+{
+	u32 val = cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_EL1_SME_SHIFT);
+
+	return val > 0;
+}
+
+static inline bool id_aa64pfr1_mte(u64 pfr1)
+{
+	u32 val = cpuid_feature_extract_unsigned_field(pfr1, ID_AA64PFR1_EL1_MTE_SHIFT);
+
+	return val >= ID_AA64PFR1_EL1_MTE_MTE2;
+}
+
+void __init setup_cpu_features(void);
+void check_local_cpu_capabilities(void);
+
+u64 read_sanitised_ftr_reg(u32 id);
+u64 __read_sysreg_by_encoding(u32 sys_id);
+
+static inline bool cpu_supports_mixed_endian_el0(void)
+{
+	return id_aa64mmfr0_mixed_endian_el0(read_cpuid(ID_AA64MMFR0_EL1));
+}
+
+
+static inline bool supports_csv2p3(int scope)
+{
+	u64 pfr0;
+	u8 csv2_val;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+	else
+		pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	csv2_val = cpuid_feature_extract_unsigned_field(pfr0,
+							ID_AA64PFR0_EL1_CSV2_SHIFT);
+	return csv2_val == 3;
+}
+
+static inline bool supports_clearbhb(int scope)
+{
+	u64 isar2;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		isar2 = read_sysreg_s(SYS_ID_AA64ISAR2_EL1);
+	else
+		isar2 = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
+
+	return cpuid_feature_extract_unsigned_field(isar2,
+						    ID_AA64ISAR2_EL1_CLRBHB_SHIFT);
+}
+
+const struct cpumask *system_32bit_el0_cpumask(void);
+DECLARE_STATIC_KEY_FALSE(arm64_mismatched_32bit_el0);
+
+static inline bool system_supports_32bit_el0(void)
+{
+	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	return static_branch_unlikely(&arm64_mismatched_32bit_el0) ||
+	       id_aa64pfr0_32bit_el0(pfr0);
+}
+
+static inline bool system_supports_4kb_granule(void)
+{
+	u64 mmfr0;
+	u32 val;
+
+	mmfr0 =	read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	val = cpuid_feature_extract_unsigned_field(mmfr0,
+						ID_AA64MMFR0_EL1_TGRAN4_SHIFT);
+
+	return (val >= ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN) &&
+	       (val <= ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX);
+}
+
+static inline bool system_supports_64kb_granule(void)
+{
+	u64 mmfr0;
+	u32 val;
+
+	mmfr0 =	read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	val = cpuid_feature_extract_unsigned_field(mmfr0,
+						ID_AA64MMFR0_EL1_TGRAN64_SHIFT);
+
+	return (val >= ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN) &&
+	       (val <= ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX);
+}
+
+static inline bool system_supports_16kb_granule(void)
+{
+	u64 mmfr0;
+	u32 val;
+
+	mmfr0 =	read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	val = cpuid_feature_extract_unsigned_field(mmfr0,
+						ID_AA64MMFR0_EL1_TGRAN16_SHIFT);
+
+	return (val >= ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN) &&
+	       (val <= ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX);
+}
+
+static inline bool system_supports_mixed_endian_el0(void)
+{
+	return id_aa64mmfr0_mixed_endian_el0(read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1));
+}
+
+static inline bool system_supports_mixed_endian(void)
+{
+	u64 mmfr0;
+	u32 val;
+
+	mmfr0 =	read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	val = cpuid_feature_extract_unsigned_field(mmfr0,
+						ID_AA64MMFR0_EL1_BIGEND_SHIFT);
+
+	return val == 0x1;
+}
+
+static __always_inline bool system_supports_fpsimd(void)
+{
+	return !cpus_have_const_cap(ARM64_HAS_NO_FPSIMD);
+}
+
+static inline bool system_uses_hw_pan(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_PAN) &&
+		cpus_have_const_cap(ARM64_HAS_PAN);
+}
+
+static inline bool system_uses_ttbr0_pan(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN) &&
+		!system_uses_hw_pan();
+}
+
+static __always_inline bool system_supports_sve(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_SVE) &&
+		cpus_have_const_cap(ARM64_SVE);
+}
+
+static __always_inline bool system_supports_sme(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_SME) &&
+		cpus_have_const_cap(ARM64_SME);
+}
+
+static __always_inline bool system_supports_sme2(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_SME) &&
+		cpus_have_const_cap(ARM64_SME2);
+}
+
+static __always_inline bool system_supports_fa64(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_SME) &&
+		cpus_have_const_cap(ARM64_SME_FA64);
+}
+
+static __always_inline bool system_supports_tpidr2(void)
+{
+	return system_supports_sme();
+}
+
+static __always_inline bool system_supports_cnp(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_CNP) &&
+		cpus_have_const_cap(ARM64_HAS_CNP);
+}
+
+static inline bool system_supports_address_auth(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_PTR_AUTH) &&
+		cpus_have_const_cap(ARM64_HAS_ADDRESS_AUTH);
+}
+
+static inline bool system_supports_generic_auth(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_PTR_AUTH) &&
+		cpus_have_const_cap(ARM64_HAS_GENERIC_AUTH);
+}
+
+static inline bool system_has_full_ptr_auth(void)
+{
+	return system_supports_address_auth() && system_supports_generic_auth();
+}
+
+static __always_inline bool system_uses_irq_prio_masking(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
+	       cpus_have_const_cap(ARM64_HAS_GIC_PRIO_MASKING);
+}
+
+static inline bool system_supports_mte(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_MTE) &&
+		cpus_have_const_cap(ARM64_MTE);
+}
+
+static inline bool system_has_prio_mask_debugging(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING) &&
+	       system_uses_irq_prio_masking();
+}
+
+static inline bool system_supports_bti(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_BTI) && cpus_have_const_cap(ARM64_BTI);
+}
+
+static inline bool system_supports_tlb_range(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_TLB_RANGE) &&
+		cpus_have_const_cap(ARM64_HAS_TLB_RANGE);
+}
+
+int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
+bool try_emulate_mrs(struct pt_regs *regs, u32 isn);
+
+static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange)
+{
+	switch (parange) {
+	case ID_AA64MMFR0_EL1_PARANGE_32: return 32;
+	case ID_AA64MMFR0_EL1_PARANGE_36: return 36;
+	case ID_AA64MMFR0_EL1_PARANGE_40: return 40;
+	case ID_AA64MMFR0_EL1_PARANGE_42: return 42;
+	case ID_AA64MMFR0_EL1_PARANGE_44: return 44;
+	case ID_AA64MMFR0_EL1_PARANGE_48: return 48;
+	case ID_AA64MMFR0_EL1_PARANGE_52: return 52;
+	/*
+	 * A future PE could use a value unknown to the kernel.
+	 * However, by the "D10.1.4 Principles of the ID scheme
+	 * for fields in ID registers", ARM DDI 0487C.a, any new
+	 * value is guaranteed to be higher than what we know already.
+	 * As a safe limit, we return the limit supported by the kernel.
+	 */
+	default: return CONFIG_ARM64_PA_BITS;
+	}
+}
+
+/* Check whether hardware update of the Access flag is supported */
+static inline bool cpu_has_hw_af(void)
+{
+	u64 mmfr1;
+
+	if (!IS_ENABLED(CONFIG_ARM64_HW_AFDBM))
+		return false;
+
+	/*
+	 * Use cached version to avoid emulated msr operation on KVM
+	 * guests.
+	 */
+	mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	return cpuid_feature_extract_unsigned_field(mmfr1,
+						ID_AA64MMFR1_EL1_HAFDBS_SHIFT);
+}
+
+static inline bool cpu_has_pan(void)
+{
+	u64 mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
+	return cpuid_feature_extract_unsigned_field(mmfr1,
+						    ID_AA64MMFR1_EL1_PAN_SHIFT);
+}
+
+#ifdef CONFIG_ARM64_AMU_EXTN
+/* Check whether the cpu supports the Activity Monitors Unit (AMU) */
+extern bool cpu_has_amu_feat(int cpu);
+#else
+static inline bool cpu_has_amu_feat(int cpu)
+{
+	return false;
+}
+#endif
+
+/* Get a cpu that supports the Activity Monitors Unit (AMU) */
+extern int get_cpu_with_amu_feat(void);
+
+static inline unsigned int get_vmid_bits(u64 mmfr1)
+{
+	int vmid_bits;
+
+	vmid_bits = cpuid_feature_extract_unsigned_field(mmfr1,
+						ID_AA64MMFR1_EL1_VMIDBits_SHIFT);
+	if (vmid_bits == ID_AA64MMFR1_EL1_VMIDBits_16)
+		return 16;
+
+	/*
+	 * Return the default here even if any reserved
+	 * value is fetched from the system register.
+	 */
+	return 8;
+}
+
+s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new, s64 cur);
+struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id);
+
+extern struct arm64_ftr_override id_aa64mmfr1_override;
+extern struct arm64_ftr_override id_aa64pfr0_override;
+extern struct arm64_ftr_override id_aa64pfr1_override;
+extern struct arm64_ftr_override id_aa64zfr0_override;
+extern struct arm64_ftr_override id_aa64smfr0_override;
+extern struct arm64_ftr_override id_aa64isar1_override;
+extern struct arm64_ftr_override id_aa64isar2_override;
+
+extern struct arm64_ftr_override arm64_sw_feature_override;
+
+u32 get_kvm_ipa_limit(void);
+void dump_cpu_features(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h
new file mode 100644
index 000000000..2047713e0
--- /dev/null
+++ b/arch/arm64/include/asm/cpuidle.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CPUIDLE_H
+#define __ASM_CPUIDLE_H
+
+#include <asm/proc-fns.h>
+
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+#include <asm/arch_gicv3.h>
+
+struct arm_cpuidle_irq_context {
+	unsigned long pmr;
+	unsigned long daif_bits;
+};
+
+#define arm_cpuidle_save_irq_context(__c)				\
+	do {								\
+		struct arm_cpuidle_irq_context *c = __c;		\
+		if (system_uses_irq_prio_masking()) {			\
+			c->daif_bits = read_sysreg(daif);		\
+			write_sysreg(c->daif_bits | PSR_I_BIT | PSR_F_BIT, \
+				     daif);				\
+			c->pmr = gic_read_pmr();			\
+			gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); \
+		}							\
+	} while (0)
+
+#define arm_cpuidle_restore_irq_context(__c)				\
+	do {								\
+		struct arm_cpuidle_irq_context *c = __c;		\
+		if (system_uses_irq_prio_masking()) {			\
+			gic_write_pmr(c->pmr);				\
+			write_sysreg(c->daif_bits, daif);		\
+		}							\
+	} while (0)
+#else
+struct arm_cpuidle_irq_context { };
+
+#define arm_cpuidle_save_irq_context(c)		(void)c
+#define arm_cpuidle_restore_irq_context(c)	(void)c
+#endif
+#endif
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
new file mode 100644
index 000000000..7c7493cb5
--- /dev/null
+++ b/arch/arm64/include/asm/cputype.h
@@ -0,0 +1,289 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_CPUTYPE_H
+#define __ASM_CPUTYPE_H
+
+#define INVALID_HWID		ULONG_MAX
+
+#define MPIDR_UP_BITMASK	(0x1 << 30)
+#define MPIDR_MT_BITMASK	(0x1 << 24)
+#define MPIDR_HWID_BITMASK	UL(0xff00ffffff)
+
+#define MPIDR_LEVEL_BITS_SHIFT	3
+#define MPIDR_LEVEL_BITS	(1 << MPIDR_LEVEL_BITS_SHIFT)
+#define MPIDR_LEVEL_MASK	((1 << MPIDR_LEVEL_BITS) - 1)
+
+#define MPIDR_LEVEL_SHIFT(level) \
+	(((1 << level) >> 1) << MPIDR_LEVEL_BITS_SHIFT)
+
+#define MPIDR_AFFINITY_LEVEL(mpidr, level) \
+	((mpidr >> MPIDR_LEVEL_SHIFT(level)) & MPIDR_LEVEL_MASK)
+
+#define MIDR_REVISION_MASK	0xf
+#define MIDR_REVISION(midr)	((midr) & MIDR_REVISION_MASK)
+#define MIDR_PARTNUM_SHIFT	4
+#define MIDR_PARTNUM_MASK	(0xfff << MIDR_PARTNUM_SHIFT)
+#define MIDR_PARTNUM(midr)	\
+	(((midr) & MIDR_PARTNUM_MASK) >> MIDR_PARTNUM_SHIFT)
+#define MIDR_ARCHITECTURE_SHIFT	16
+#define MIDR_ARCHITECTURE_MASK	(0xf << MIDR_ARCHITECTURE_SHIFT)
+#define MIDR_ARCHITECTURE(midr)	\
+	(((midr) & MIDR_ARCHITECTURE_MASK) >> MIDR_ARCHITECTURE_SHIFT)
+#define MIDR_VARIANT_SHIFT	20
+#define MIDR_VARIANT_MASK	(0xf << MIDR_VARIANT_SHIFT)
+#define MIDR_VARIANT(midr)	\
+	(((midr) & MIDR_VARIANT_MASK) >> MIDR_VARIANT_SHIFT)
+#define MIDR_IMPLEMENTOR_SHIFT	24
+#define MIDR_IMPLEMENTOR_MASK	(0xffU << MIDR_IMPLEMENTOR_SHIFT)
+#define MIDR_IMPLEMENTOR(midr)	\
+	(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
+
+#define MIDR_CPU_MODEL(imp, partnum) \
+	((_AT(u32, imp)		<< MIDR_IMPLEMENTOR_SHIFT) | \
+	(0xf			<< MIDR_ARCHITECTURE_SHIFT) | \
+	((partnum)		<< MIDR_PARTNUM_SHIFT))
+
+#define MIDR_CPU_VAR_REV(var, rev) \
+	(((var)	<< MIDR_VARIANT_SHIFT) | (rev))
+
+#define MIDR_CPU_MODEL_MASK (MIDR_IMPLEMENTOR_MASK | MIDR_PARTNUM_MASK | \
+			     MIDR_ARCHITECTURE_MASK)
+
+#define ARM_CPU_IMP_ARM			0x41
+#define ARM_CPU_IMP_APM			0x50
+#define ARM_CPU_IMP_CAVIUM		0x43
+#define ARM_CPU_IMP_BRCM		0x42
+#define ARM_CPU_IMP_QCOM		0x51
+#define ARM_CPU_IMP_NVIDIA		0x4E
+#define ARM_CPU_IMP_FUJITSU		0x46
+#define ARM_CPU_IMP_HISI		0x48
+#define ARM_CPU_IMP_APPLE		0x61
+#define ARM_CPU_IMP_AMPERE		0xC0
+
+#define ARM_CPU_PART_AEM_V8		0xD0F
+#define ARM_CPU_PART_FOUNDATION		0xD00
+#define ARM_CPU_PART_CORTEX_A57		0xD07
+#define ARM_CPU_PART_CORTEX_A72		0xD08
+#define ARM_CPU_PART_CORTEX_A53		0xD03
+#define ARM_CPU_PART_CORTEX_A73		0xD09
+#define ARM_CPU_PART_CORTEX_A75		0xD0A
+#define ARM_CPU_PART_CORTEX_A35		0xD04
+#define ARM_CPU_PART_CORTEX_A55		0xD05
+#define ARM_CPU_PART_CORTEX_A76		0xD0B
+#define ARM_CPU_PART_NEOVERSE_N1	0xD0C
+#define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_NEOVERSE_V1	0xD40
+#define ARM_CPU_PART_CORTEX_A78		0xD41
+#define ARM_CPU_PART_CORTEX_A78AE	0xD42
+#define ARM_CPU_PART_CORTEX_X1		0xD44
+#define ARM_CPU_PART_CORTEX_A510	0xD46
+#define ARM_CPU_PART_CORTEX_A520	0xD80
+#define ARM_CPU_PART_CORTEX_A710	0xD47
+#define ARM_CPU_PART_CORTEX_A715	0xD4D
+#define ARM_CPU_PART_CORTEX_X2		0xD48
+#define ARM_CPU_PART_NEOVERSE_N2	0xD49
+#define ARM_CPU_PART_CORTEX_A78C	0xD4B
+
+#define APM_CPU_PART_XGENE		0x000
+#define APM_CPU_VAR_POTENZA		0x00
+
+#define CAVIUM_CPU_PART_THUNDERX	0x0A1
+#define CAVIUM_CPU_PART_THUNDERX_81XX	0x0A2
+#define CAVIUM_CPU_PART_THUNDERX_83XX	0x0A3
+#define CAVIUM_CPU_PART_THUNDERX2	0x0AF
+/* OcteonTx2 series */
+#define CAVIUM_CPU_PART_OCTX2_98XX	0x0B1
+#define CAVIUM_CPU_PART_OCTX2_96XX	0x0B2
+#define CAVIUM_CPU_PART_OCTX2_95XX	0x0B3
+#define CAVIUM_CPU_PART_OCTX2_95XXN	0x0B4
+#define CAVIUM_CPU_PART_OCTX2_95XXMM	0x0B5
+#define CAVIUM_CPU_PART_OCTX2_95XXO	0x0B6
+
+#define BRCM_CPU_PART_BRAHMA_B53	0x100
+#define BRCM_CPU_PART_VULCAN		0x516
+
+#define QCOM_CPU_PART_FALKOR_V1		0x800
+#define QCOM_CPU_PART_FALKOR		0xC00
+#define QCOM_CPU_PART_KRYO		0x200
+#define QCOM_CPU_PART_KRYO_2XX_GOLD	0x800
+#define QCOM_CPU_PART_KRYO_2XX_SILVER	0x801
+#define QCOM_CPU_PART_KRYO_3XX_SILVER	0x803
+#define QCOM_CPU_PART_KRYO_4XX_GOLD	0x804
+#define QCOM_CPU_PART_KRYO_4XX_SILVER	0x805
+
+#define NVIDIA_CPU_PART_DENVER		0x003
+#define NVIDIA_CPU_PART_CARMEL		0x004
+
+#define FUJITSU_CPU_PART_A64FX		0x001
+
+#define HISI_CPU_PART_TSV110		0xD01
+
+#define APPLE_CPU_PART_M1_ICESTORM	0x022
+#define APPLE_CPU_PART_M1_FIRESTORM	0x023
+#define APPLE_CPU_PART_M1_ICESTORM_PRO	0x024
+#define APPLE_CPU_PART_M1_FIRESTORM_PRO	0x025
+#define APPLE_CPU_PART_M1_ICESTORM_MAX	0x028
+#define APPLE_CPU_PART_M1_FIRESTORM_MAX	0x029
+#define APPLE_CPU_PART_M2_BLIZZARD	0x032
+#define APPLE_CPU_PART_M2_AVALANCHE	0x033
+#define APPLE_CPU_PART_M2_BLIZZARD_PRO	0x034
+#define APPLE_CPU_PART_M2_AVALANCHE_PRO	0x035
+#define APPLE_CPU_PART_M2_BLIZZARD_MAX	0x038
+#define APPLE_CPU_PART_M2_AVALANCHE_MAX	0x039
+
+#define AMPERE_CPU_PART_AMPERE1		0xAC3
+
+#define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
+#define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
+#define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72)
+#define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73)
+#define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75)
+#define MIDR_CORTEX_A35 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A35)
+#define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55)
+#define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
+#define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
+#define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_NEOVERSE_V1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V1)
+#define MIDR_CORTEX_A78	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78)
+#define MIDR_CORTEX_A78AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78AE)
+#define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
+#define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
+#define MIDR_CORTEX_A520 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A520)
+#define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
+#define MIDR_CORTEX_A715 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A715)
+#define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
+#define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
+#define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
+#define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
+#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
+#define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
+#define MIDR_OCTX2_98XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_98XX)
+#define MIDR_OCTX2_96XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_96XX)
+#define MIDR_OCTX2_95XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XX)
+#define MIDR_OCTX2_95XXN MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XXN)
+#define MIDR_OCTX2_95XXMM MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XXMM)
+#define MIDR_OCTX2_95XXO MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XXO)
+#define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2)
+#define MIDR_BRAHMA_B53 MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_BRAHMA_B53)
+#define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN)
+#define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
+#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
+#define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
+#define MIDR_QCOM_KRYO_2XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_GOLD)
+#define MIDR_QCOM_KRYO_2XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_2XX_SILVER)
+#define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
+#define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
+#define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)
+#define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER)
+#define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
+#define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
+#define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
+#define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM)
+#define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM)
+#define MIDR_APPLE_M1_ICESTORM_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM_PRO)
+#define MIDR_APPLE_M1_FIRESTORM_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM_PRO)
+#define MIDR_APPLE_M1_ICESTORM_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM_MAX)
+#define MIDR_APPLE_M1_FIRESTORM_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM_MAX)
+#define MIDR_APPLE_M2_BLIZZARD MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD)
+#define MIDR_APPLE_M2_AVALANCHE MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE)
+#define MIDR_APPLE_M2_BLIZZARD_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_PRO)
+#define MIDR_APPLE_M2_AVALANCHE_PRO MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_PRO)
+#define MIDR_APPLE_M2_BLIZZARD_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_BLIZZARD_MAX)
+#define MIDR_APPLE_M2_AVALANCHE_MAX MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M2_AVALANCHE_MAX)
+#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1)
+
+/* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */
+#define MIDR_FUJITSU_ERRATUM_010001		MIDR_FUJITSU_A64FX
+#define MIDR_FUJITSU_ERRATUM_010001_MASK	(~MIDR_CPU_VAR_REV(1, 0))
+#define TCR_CLEAR_FUJITSU_ERRATUM_010001	(TCR_NFD1 | TCR_NFD0)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/sysreg.h>
+
+#define read_cpuid(reg)			read_sysreg_s(SYS_ ## reg)
+
+/*
+ * Represent a range of MIDR values for a given CPU model and a
+ * range of variant/revision values.
+ *
+ * @model	- CPU model as defined by MIDR_CPU_MODEL
+ * @rv_min	- Minimum value for the revision/variant as defined by
+ *		  MIDR_CPU_VAR_REV
+ * @rv_max	- Maximum value for the variant/revision for the range.
+ */
+struct midr_range {
+	u32 model;
+	u32 rv_min;
+	u32 rv_max;
+};
+
+#define MIDR_RANGE(m, v_min, r_min, v_max, r_max)		\
+	{							\
+		.model = m,					\
+		.rv_min = MIDR_CPU_VAR_REV(v_min, r_min),	\
+		.rv_max = MIDR_CPU_VAR_REV(v_max, r_max),	\
+	}
+
+#define MIDR_REV_RANGE(m, v, r_min, r_max) MIDR_RANGE(m, v, r_min, v, r_max)
+#define MIDR_REV(m, v, r) MIDR_RANGE(m, v, r, v, r)
+#define MIDR_ALL_VERSIONS(m) MIDR_RANGE(m, 0, 0, 0xf, 0xf)
+
+static inline bool midr_is_cpu_model_range(u32 midr, u32 model, u32 rv_min,
+					   u32 rv_max)
+{
+	u32 _model = midr & MIDR_CPU_MODEL_MASK;
+	u32 rv = midr & (MIDR_REVISION_MASK | MIDR_VARIANT_MASK);
+
+	return _model == model && rv >= rv_min && rv <= rv_max;
+}
+
+static inline bool is_midr_in_range(u32 midr, struct midr_range const *range)
+{
+	return midr_is_cpu_model_range(midr, range->model,
+				       range->rv_min, range->rv_max);
+}
+
+static inline bool
+is_midr_in_range_list(u32 midr, struct midr_range const *ranges)
+{
+	while (ranges->model)
+		if (is_midr_in_range(midr, ranges++))
+			return true;
+	return false;
+}
+
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline u32 __attribute_const__ read_cpuid_id(void)
+{
+	return read_cpuid(MIDR_EL1);
+}
+
+static inline u64 __attribute_const__ read_cpuid_mpidr(void)
+{
+	return read_cpuid(MPIDR_EL1);
+}
+
+static inline unsigned int __attribute_const__ read_cpuid_implementor(void)
+{
+	return MIDR_IMPLEMENTOR(read_cpuid_id());
+}
+
+static inline unsigned int __attribute_const__ read_cpuid_part_number(void)
+{
+	return MIDR_PARTNUM(read_cpuid_id());
+}
+
+static inline u32 __attribute_const__ read_cpuid_cachetype(void)
+{
+	return read_cpuid(CTR_EL0);
+}
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm64/include/asm/current.h b/arch/arm64/include/asm/current.h
new file mode 100644
index 000000000..54ceae087
--- /dev/null
+++ b/arch/arm64/include/asm/current.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_CURRENT_H
+#define __ASM_CURRENT_H
+
+#include <linux/compiler.h>
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+/*
+ * We don't use read_sysreg() as we want the compiler to cache the value where
+ * possible.
+ */
+static __always_inline struct task_struct *get_current(void)
+{
+	unsigned long sp_el0;
+
+	asm ("mrs %0, sp_el0" : "=r" (sp_el0));
+
+	return (struct task_struct *)sp_el0;
+}
+
+#define current get_current()
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_CURRENT_H */
+
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
new file mode 100644
index 000000000..55f57dfa8
--- /dev/null
+++ b/arch/arm64/include/asm/daifflags.h
@@ -0,0 +1,144 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 ARM Ltd.
+ */
+#ifndef __ASM_DAIFFLAGS_H
+#define __ASM_DAIFFLAGS_H
+
+#include <linux/irqflags.h>
+
+#include <asm/arch_gicv3.h>
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/ptrace.h>
+
+#define DAIF_PROCCTX		0
+#define DAIF_PROCCTX_NOIRQ	(PSR_I_BIT | PSR_F_BIT)
+#define DAIF_ERRCTX		(PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
+#define DAIF_MASK		(PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
+
+
+/* mask/save/unmask/restore all exceptions, including interrupts. */
+static inline void local_daif_mask(void)
+{
+	WARN_ON(system_has_prio_mask_debugging() &&
+		(read_sysreg_s(SYS_ICC_PMR_EL1) == (GIC_PRIO_IRQOFF |
+						    GIC_PRIO_PSR_I_SET)));
+
+	asm volatile(
+		"msr	daifset, #0xf		// local_daif_mask\n"
+		:
+		:
+		: "memory");
+
+	/* Don't really care for a dsb here, we don't intend to enable IRQs */
+	if (system_uses_irq_prio_masking())
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+
+	trace_hardirqs_off();
+}
+
+static inline unsigned long local_daif_save_flags(void)
+{
+	unsigned long flags;
+
+	flags = read_sysreg(daif);
+
+	if (system_uses_irq_prio_masking()) {
+		/* If IRQs are masked with PMR, reflect it in the flags */
+		if (read_sysreg_s(SYS_ICC_PMR_EL1) != GIC_PRIO_IRQON)
+			flags |= PSR_I_BIT | PSR_F_BIT;
+	}
+
+	return flags;
+}
+
+static inline unsigned long local_daif_save(void)
+{
+	unsigned long flags;
+
+	flags = local_daif_save_flags();
+
+	local_daif_mask();
+
+	return flags;
+}
+
+static inline void local_daif_restore(unsigned long flags)
+{
+	bool irq_disabled = flags & PSR_I_BIT;
+
+	WARN_ON(system_has_prio_mask_debugging() &&
+		(read_sysreg(daif) & (PSR_I_BIT | PSR_F_BIT)) != (PSR_I_BIT | PSR_F_BIT));
+
+	if (!irq_disabled) {
+		trace_hardirqs_on();
+
+		if (system_uses_irq_prio_masking()) {
+			gic_write_pmr(GIC_PRIO_IRQON);
+			pmr_sync();
+		}
+	} else if (system_uses_irq_prio_masking()) {
+		u64 pmr;
+
+		if (!(flags & PSR_A_BIT)) {
+			/*
+			 * If interrupts are disabled but we can take
+			 * asynchronous errors, we can take NMIs
+			 */
+			flags &= ~(PSR_I_BIT | PSR_F_BIT);
+			pmr = GIC_PRIO_IRQOFF;
+		} else {
+			pmr = GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET;
+		}
+
+		/*
+		 * There has been concern that the write to daif
+		 * might be reordered before this write to PMR.
+		 * From the ARM ARM DDI 0487D.a, section D1.7.1
+		 * "Accessing PSTATE fields":
+		 *   Writes to the PSTATE fields have side-effects on
+		 *   various aspects of the PE operation. All of these
+		 *   side-effects are guaranteed:
+		 *     - Not to be visible to earlier instructions in
+		 *       the execution stream.
+		 *     - To be visible to later instructions in the
+		 *       execution stream
+		 *
+		 * Also, writes to PMR are self-synchronizing, so no
+		 * interrupts with a lower priority than PMR is signaled
+		 * to the PE after the write.
+		 *
+		 * So we don't need additional synchronization here.
+		 */
+		gic_write_pmr(pmr);
+	}
+
+	write_sysreg(flags, daif);
+
+	if (irq_disabled)
+		trace_hardirqs_off();
+}
+
+/*
+ * Called by synchronous exception handlers to restore the DAIF bits that were
+ * modified by taking an exception.
+ */
+static inline void local_daif_inherit(struct pt_regs *regs)
+{
+	unsigned long flags = regs->pstate & DAIF_MASK;
+
+	if (interrupts_enabled(regs))
+		trace_hardirqs_on();
+
+	if (system_uses_irq_prio_masking())
+		gic_write_pmr(regs->pmr_save);
+
+	/*
+	 * We can't use local_daif_restore(regs->pstate) here as
+	 * system_has_prio_mask_debugging() won't restore the I bit if it can
+	 * use the pmr instead.
+	 */
+	write_sysreg(flags, daif);
+}
+#endif
diff --git a/arch/arm64/include/asm/dcc.h b/arch/arm64/include/asm/dcc.h
new file mode 100644
index 000000000..ebd9fb472
--- /dev/null
+++ b/arch/arm64/include/asm/dcc.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2014-2015 The Linux Foundation. All rights reserved.
+ *
+ * A call to __dcc_getchar() or __dcc_putchar() is typically followed by
+ * a call to __dcc_getstatus().  We want to make sure that the CPU does
+ * not speculative read the DCC status before executing the read or write
+ * instruction.  That's what the ISBs are for.
+ *
+ * The 'volatile' ensures that the compiler does not cache the status bits,
+ * and instead reads the DCC register every time.
+ */
+#ifndef __ASM_DCC_H
+#define __ASM_DCC_H
+
+#include <asm/barrier.h>
+#include <asm/sysreg.h>
+
+static inline u32 __dcc_getstatus(void)
+{
+	return read_sysreg(mdccsr_el0);
+}
+
+static inline char __dcc_getchar(void)
+{
+	char c = read_sysreg(dbgdtrrx_el0);
+	isb();
+
+	return c;
+}
+
+static inline void __dcc_putchar(char c)
+{
+	/*
+	 * The typecast is to make absolutely certain that 'c' is
+	 * zero-extended.
+	 */
+	write_sysreg((unsigned char)c, dbgdtrtx_el0);
+	isb();
+}
+
+#endif
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
new file mode 100644
index 000000000..13d437bcb
--- /dev/null
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_DEBUG_MONITORS_H
+#define __ASM_DEBUG_MONITORS_H
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <asm/brk-imm.h>
+#include <asm/esr.h>
+#include <asm/insn.h>
+#include <asm/ptrace.h>
+
+/* Low-level stepping controls. */
+#define DBG_MDSCR_SS		(1 << 0)
+#define DBG_SPSR_SS		(1 << 21)
+
+/* MDSCR_EL1 enabling bits */
+#define DBG_MDSCR_KDE		(1 << 13)
+#define DBG_MDSCR_MDE		(1 << 15)
+#define DBG_MDSCR_MASK		~(DBG_MDSCR_KDE | DBG_MDSCR_MDE)
+
+#define	DBG_ESR_EVT(x)		(((x) >> 27) & 0x7)
+
+/* AArch64 */
+#define DBG_ESR_EVT_HWBP	0x0
+#define DBG_ESR_EVT_HWSS	0x1
+#define DBG_ESR_EVT_HWWP	0x2
+#define DBG_ESR_EVT_BRK		0x6
+
+/*
+ * Break point instruction encoding
+ */
+#define BREAK_INSTR_SIZE		AARCH64_INSN_SIZE
+
+#define AARCH64_BREAK_KGDB_DYN_DBG	\
+	(AARCH64_BREAK_MON | (KGDB_DYN_DBG_BRK_IMM << 5))
+
+#define CACHE_FLUSH_IS_SAFE		1
+
+/* kprobes BRK opcodes with ESR encoding  */
+#define BRK64_OPCODE_KPROBES	(AARCH64_BREAK_MON | (KPROBES_BRK_IMM << 5))
+#define BRK64_OPCODE_KPROBES_SS	(AARCH64_BREAK_MON | (KPROBES_BRK_SS_IMM << 5))
+/* uprobes BRK opcodes with ESR encoding  */
+#define BRK64_OPCODE_UPROBES	(AARCH64_BREAK_MON | (UPROBES_BRK_IMM << 5))
+
+/* AArch32 */
+#define DBG_ESR_EVT_BKPT	0x4
+#define DBG_ESR_EVT_VECC	0x5
+
+#define AARCH32_BREAK_ARM	0x07f001f0
+#define AARCH32_BREAK_THUMB	0xde01
+#define AARCH32_BREAK_THUMB2_LO	0xf7f0
+#define AARCH32_BREAK_THUMB2_HI	0xa000
+
+#ifndef __ASSEMBLY__
+struct task_struct;
+
+#define DBG_ARCH_ID_RESERVED	0	/* In case of ptrace ABI updates. */
+
+#define DBG_HOOK_HANDLED	0
+#define DBG_HOOK_ERROR		1
+
+struct step_hook {
+	struct list_head node;
+	int (*fn)(struct pt_regs *regs, unsigned long esr);
+};
+
+void register_user_step_hook(struct step_hook *hook);
+void unregister_user_step_hook(struct step_hook *hook);
+
+void register_kernel_step_hook(struct step_hook *hook);
+void unregister_kernel_step_hook(struct step_hook *hook);
+
+struct break_hook {
+	struct list_head node;
+	int (*fn)(struct pt_regs *regs, unsigned long esr);
+	u16 imm;
+	u16 mask; /* These bits are ignored when comparing with imm */
+};
+
+void register_user_break_hook(struct break_hook *hook);
+void unregister_user_break_hook(struct break_hook *hook);
+
+void register_kernel_break_hook(struct break_hook *hook);
+void unregister_kernel_break_hook(struct break_hook *hook);
+
+u8 debug_monitors_arch(void);
+
+enum dbg_active_el {
+	DBG_ACTIVE_EL0 = 0,
+	DBG_ACTIVE_EL1,
+};
+
+void enable_debug_monitors(enum dbg_active_el el);
+void disable_debug_monitors(enum dbg_active_el el);
+
+void user_rewind_single_step(struct task_struct *task);
+void user_fastforward_single_step(struct task_struct *task);
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task);
+
+void kernel_enable_single_step(struct pt_regs *regs);
+void kernel_disable_single_step(void);
+int kernel_active_single_step(void);
+void kernel_rewind_single_step(struct pt_regs *regs);
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+int reinstall_suspended_bps(struct pt_regs *regs);
+#else
+static inline int reinstall_suspended_bps(struct pt_regs *regs)
+{
+	return -ENODEV;
+}
+#endif
+
+int aarch32_break_handler(struct pt_regs *regs);
+
+void debug_traps_init(void);
+
+#endif	/* __ASSEMBLY */
+#endif	/* __ASM_DEBUG_MONITORS_H */
diff --git a/arch/arm64/include/asm/device.h b/arch/arm64/include/asm/device.h
new file mode 100644
index 000000000..996498751
--- /dev/null
+++ b/arch/arm64/include/asm/device.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_DEVICE_H
+#define __ASM_DEVICE_H
+
+struct dev_archdata {
+};
+
+struct pdev_archdata {
+};
+
+#endif
diff --git a/arch/arm64/include/asm/dmi.h b/arch/arm64/include/asm/dmi.h
new file mode 100644
index 000000000..69d37d87b
--- /dev/null
+++ b/arch/arm64/include/asm/dmi.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm64/include/asm/dmi.h
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ * Written by: Yi Li (yi.li@linaro.org)
+ *
+ * based on arch/ia64/include/asm/dmi.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_DMI_H
+#define __ASM_DMI_H
+
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/*
+ * According to section 2.3.6 of the UEFI spec, the firmware should not
+ * request a virtual mapping for configuration tables such as SMBIOS.
+ * This means we have to map them before use.
+ */
+#define dmi_early_remap(x, l)		ioremap_cache(x, l)
+#define dmi_early_unmap(x, l)		iounmap(x)
+#define dmi_remap(x, l)			ioremap_cache(x, l)
+#define dmi_unmap(x)			iounmap(x)
+#define dmi_alloc(l)			kzalloc(l, GFP_KERNEL)
+
+#endif
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
new file mode 100644
index 000000000..bcd5622aa
--- /dev/null
+++ b/arch/arm64/include/asm/efi.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_EFI_H
+#define _ASM_EFI_H
+
+#include <asm/boot.h>
+#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
+#include <asm/io.h>
+#include <asm/memory.h>
+#include <asm/mmu_context.h>
+#include <asm/neon.h>
+#include <asm/ptrace.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_EFI
+extern void efi_init(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg);
+#else
+#define efi_init()
+
+static inline
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	return false;
+}
+#endif
+
+int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
+int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md,
+				bool has_bti);
+
+#undef arch_efi_call_virt
+#define arch_efi_call_virt(p, f, args...)				\
+	__efi_rt_asm_wrapper((p)->f, #f, args)
+
+extern u64 *efi_rt_stack_top;
+efi_status_t __efi_rt_asm_wrapper(void *, const char *, ...);
+
+void arch_efi_call_virt_setup(void);
+void arch_efi_call_virt_teardown(void);
+
+/*
+ * efi_rt_stack_top[-1] contains the value the stack pointer had before
+ * switching to the EFI runtime stack.
+ */
+#define current_in_efi()						\
+	(!preemptible() && efi_rt_stack_top != NULL &&			\
+	 on_task_stack(current, READ_ONCE(efi_rt_stack_top[-1]), 1))
+
+#define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT)
+
+/*
+ * Even when Linux uses IRQ priorities for IRQ disabling, EFI does not.
+ * And EFI shouldn't really play around with priority masking as it is not aware
+ * which priorities the OS has assigned to its interrupts.
+ */
+#define arch_efi_save_flags(state_flags)		\
+	((void)((state_flags) = read_sysreg(daif)))
+
+#define arch_efi_restore_flags(state_flags)	write_sysreg(state_flags, daif)
+
+
+/* arch specific definitions used by the stub code */
+
+/*
+ * In some configurations (e.g. VMAP_STACK && 64K pages), stacks built into the
+ * kernel need greater alignment than we require the segments to be padded to.
+ */
+#define EFI_KIMG_ALIGN	\
+	(SEGMENT_ALIGN > THREAD_ALIGN ? SEGMENT_ALIGN : THREAD_ALIGN)
+
+/*
+ * On arm64, we have to ensure that the initrd ends up in the linear region,
+ * which is a 1 GB aligned region of size '1UL << (VA_BITS_MIN - 1)' that is
+ * guaranteed to cover the kernel Image.
+ *
+ * Since the EFI stub is part of the kernel Image, we can relax the
+ * usual requirements in Documentation/arch/arm64/booting.rst, which still
+ * apply to other bootloaders, and are required for some kernel
+ * configurations.
+ */
+static inline unsigned long efi_get_max_initrd_addr(unsigned long image_addr)
+{
+	return (image_addr & ~(SZ_1G - 1UL)) + (1UL << (VA_BITS_MIN - 1));
+}
+
+static inline unsigned long efi_get_kimg_min_align(void)
+{
+	extern bool efi_nokaslr;
+
+	/*
+	 * Although relocatable kernels can fix up the misalignment with
+	 * respect to MIN_KIMG_ALIGN, the resulting virtual text addresses are
+	 * subtly out of sync with those recorded in the vmlinux when kaslr is
+	 * disabled but the image required relocation anyway. Therefore retain
+	 * 2M alignment if KASLR was explicitly disabled, even if it was not
+	 * going to be activated to begin with.
+	 */
+	return efi_nokaslr ? MIN_KIMG_ALIGN : EFI_KIMG_ALIGN;
+}
+
+#define EFI_ALLOC_ALIGN		SZ_64K
+#define EFI_ALLOC_LIMIT		((1UL << 48) - 1)
+
+extern unsigned long primary_entry_offset(void);
+
+/*
+ * On ARM systems, virtually remapped UEFI runtime services are set up in two
+ * distinct stages:
+ * - The stub retrieves the final version of the memory map from UEFI, populates
+ *   the virt_addr fields and calls the SetVirtualAddressMap() [SVAM] runtime
+ *   service to communicate the new mapping to the firmware (Note that the new
+ *   mapping is not live at this time)
+ * - During an early initcall(), the EFI system table is permanently remapped
+ *   and the virtual remapping of the UEFI Runtime Services regions is loaded
+ *   into a private set of page tables. If this all succeeds, the Runtime
+ *   Services are enabled and the EFI_RUNTIME_SERVICES bit set.
+ */
+
+static inline void efi_set_pgd(struct mm_struct *mm)
+{
+	__switch_mm(mm);
+
+	if (system_uses_ttbr0_pan()) {
+		if (mm != current->active_mm) {
+			/*
+			 * Update the current thread's saved ttbr0 since it is
+			 * restored as part of a return from exception. Enable
+			 * access to the valid TTBR0_EL1 and invoke the errata
+			 * workaround directly since there is no return from
+			 * exception when invoking the EFI run-time services.
+			 */
+			update_saved_ttbr0(current, mm);
+			uaccess_ttbr0_enable();
+			post_ttbr_update_workaround();
+		} else {
+			/*
+			 * Defer the switch to the current thread's TTBR0_EL1
+			 * until uaccess_enable(). Restore the current
+			 * thread's saved ttbr0 corresponding to its active_mm
+			 */
+			uaccess_ttbr0_disable();
+			update_saved_ttbr0(current, current->active_mm);
+		}
+	}
+}
+
+void efi_virtmap_load(void);
+void efi_virtmap_unload(void);
+
+static inline void efi_capsule_flush_cache_range(void *addr, int size)
+{
+	dcache_clean_inval_poc((unsigned long)addr, (unsigned long)addr + size);
+}
+
+efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f);
+
+void efi_icache_sync(unsigned long start, unsigned long end);
+
+#endif /* _ASM_EFI_H */
diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
new file mode 100644
index 000000000..b7afaa026
--- /dev/null
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -0,0 +1,344 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM_KVM_INIT_H__
+#define __ARM_KVM_INIT_H__
+
+#ifndef __ASSEMBLY__
+#error Assembly-only header
+#endif
+
+#include <asm/kvm_arm.h>
+#include <asm/ptrace.h>
+#include <asm/sysreg.h>
+#include <linux/irqchip/arm-gic-v3.h>
+
+.macro __init_el2_sctlr
+	mov_q	x0, INIT_SCTLR_EL2_MMU_OFF
+	msr	sctlr_el2, x0
+	isb
+.endm
+
+.macro __init_el2_hcrx
+	mrs	x0, id_aa64mmfr1_el1
+	ubfx	x0, x0, #ID_AA64MMFR1_EL1_HCX_SHIFT, #4
+	cbz	x0, .Lskip_hcrx_\@
+	mov_q	x0, HCRX_HOST_FLAGS
+	msr_s	SYS_HCRX_EL2, x0
+.Lskip_hcrx_\@:
+.endm
+
+/* Check if running in host at EL2 mode, i.e., (h)VHE. Jump to fail if not. */
+.macro __check_hvhe fail, tmp
+	mrs	\tmp, hcr_el2
+	and	\tmp, \tmp, #HCR_E2H
+	cbz	\tmp, \fail
+.endm
+
+/*
+ * Allow Non-secure EL1 and EL0 to access physical timer and counter.
+ * This is not necessary for VHE, since the host kernel runs in EL2,
+ * and EL0 accesses are configured in the later stage of boot process.
+ * Note that when HCR_EL2.E2H == 1, CNTHCTL_EL2 has the same bit layout
+ * as CNTKCTL_EL1, and CNTKCTL_EL1 accessing instructions are redefined
+ * to access CNTHCTL_EL2. This allows the kernel designed to run at EL1
+ * to transparently mess with the EL0 bits via CNTKCTL_EL1 access in
+ * EL2.
+ */
+.macro __init_el2_timers
+	mov	x0, #3				// Enable EL1 physical timers
+	__check_hvhe .LnVHE_\@, x1
+	lsl	x0, x0, #10
+.LnVHE_\@:
+	msr	cnthctl_el2, x0
+	msr	cntvoff_el2, xzr		// Clear virtual offset
+.endm
+
+.macro __init_el2_debug
+	mrs	x1, id_aa64dfr0_el1
+	sbfx	x0, x1, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4
+	cmp	x0, #1
+	b.lt	.Lskip_pmu_\@			// Skip if no PMU present
+	mrs	x0, pmcr_el0			// Disable debug access traps
+	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
+.Lskip_pmu_\@:
+	csel	x2, xzr, x0, lt			// all PMU counters from EL1
+
+	/* Statistical profiling */
+	ubfx	x0, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
+	cbz	x0, .Lskip_spe_\@		// Skip if SPE not present
+
+	mrs_s	x0, SYS_PMBIDR_EL1              // If SPE available at EL2,
+	and	x0, x0, #(1 << PMBIDR_EL1_P_SHIFT)
+	cbnz	x0, .Lskip_spe_el2_\@		// then permit sampling of physical
+	mov	x0, #(1 << PMSCR_EL2_PCT_SHIFT | \
+		      1 << PMSCR_EL2_PA_SHIFT)
+	msr_s	SYS_PMSCR_EL2, x0		// addresses and physical counter
+.Lskip_spe_el2_\@:
+	mov	x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
+	orr	x2, x2, x0			// If we don't have VHE, then
+						// use EL1&0 translation.
+
+.Lskip_spe_\@:
+	/* Trace buffer */
+	ubfx	x0, x1, #ID_AA64DFR0_EL1_TraceBuffer_SHIFT, #4
+	cbz	x0, .Lskip_trace_\@		// Skip if TraceBuffer is not present
+
+	mrs_s	x0, SYS_TRBIDR_EL1
+	and	x0, x0, TRBIDR_EL1_P
+	cbnz	x0, .Lskip_trace_\@		// If TRBE is available at EL2
+
+	mov	x0, #(MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT)
+	orr	x2, x2, x0			// allow the EL1&0 translation
+						// to own it.
+
+.Lskip_trace_\@:
+	msr	mdcr_el2, x2			// Configure debug traps
+.endm
+
+/* LORegions */
+.macro __init_el2_lor
+	mrs	x1, id_aa64mmfr1_el1
+	ubfx	x0, x1, #ID_AA64MMFR1_EL1_LO_SHIFT, 4
+	cbz	x0, .Lskip_lor_\@
+	msr_s	SYS_LORC_EL1, xzr
+.Lskip_lor_\@:
+.endm
+
+/* Stage-2 translation */
+.macro __init_el2_stage2
+	msr	vttbr_el2, xzr
+.endm
+
+/* GICv3 system register access */
+.macro __init_el2_gicv3
+	mrs	x0, id_aa64pfr0_el1
+	ubfx	x0, x0, #ID_AA64PFR0_EL1_GIC_SHIFT, #4
+	cbz	x0, .Lskip_gicv3_\@
+
+	mrs_s	x0, SYS_ICC_SRE_EL2
+	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
+	orr	x0, x0, #ICC_SRE_EL2_ENABLE	// Set ICC_SRE_EL2.Enable==1
+	msr_s	SYS_ICC_SRE_EL2, x0
+	isb					// Make sure SRE is now set
+	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
+	tbz	x0, #0, .Lskip_gicv3_\@		// and check that it sticks
+	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICH_HCR_EL2 to defaults
+.Lskip_gicv3_\@:
+.endm
+
+.macro __init_el2_hstr
+	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
+.endm
+
+/* Virtual CPU ID registers */
+.macro __init_el2_nvhe_idregs
+	mrs	x0, midr_el1
+	mrs	x1, mpidr_el1
+	msr	vpidr_el2, x0
+	msr	vmpidr_el2, x1
+.endm
+
+/* Coprocessor traps */
+.macro __init_el2_cptr
+	__check_hvhe .LnVHE_\@, x1
+	mov	x0, #(CPACR_EL1_FPEN_EL1EN | CPACR_EL1_FPEN_EL0EN)
+	msr	cpacr_el1, x0
+	b	.Lskip_set_cptr_\@
+.LnVHE_\@:
+	mov	x0, #0x33ff
+	msr	cptr_el2, x0			// Disable copro. traps to EL2
+.Lskip_set_cptr_\@:
+.endm
+
+/* Disable any fine grained traps */
+.macro __init_el2_fgt
+	mrs	x1, id_aa64mmfr0_el1
+	ubfx	x1, x1, #ID_AA64MMFR0_EL1_FGT_SHIFT, #4
+	cbz	x1, .Lskip_fgt_\@
+
+	mov	x0, xzr
+	mrs	x1, id_aa64dfr0_el1
+	ubfx	x1, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
+	cmp	x1, #3
+	b.lt	.Lset_debug_fgt_\@
+	/* Disable PMSNEVFR_EL1 read and write traps */
+	orr	x0, x0, #(1 << 62)
+
+.Lset_debug_fgt_\@:
+	msr_s	SYS_HDFGRTR_EL2, x0
+	msr_s	SYS_HDFGWTR_EL2, x0
+
+	mov	x0, xzr
+	mrs	x1, id_aa64pfr1_el1
+	ubfx	x1, x1, #ID_AA64PFR1_EL1_SME_SHIFT, #4
+	cbz	x1, .Lset_pie_fgt_\@
+
+	/* Disable nVHE traps of TPIDR2 and SMPRI */
+	orr	x0, x0, #HFGxTR_EL2_nSMPRI_EL1_MASK
+	orr	x0, x0, #HFGxTR_EL2_nTPIDR2_EL0_MASK
+
+.Lset_pie_fgt_\@:
+	mrs_s	x1, SYS_ID_AA64MMFR3_EL1
+	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
+	cbz	x1, .Lset_fgt_\@
+
+	/* Disable trapping of PIR_EL1 / PIRE0_EL1 */
+	orr	x0, x0, #HFGxTR_EL2_nPIR_EL1
+	orr	x0, x0, #HFGxTR_EL2_nPIRE0_EL1
+
+.Lset_fgt_\@:
+	msr_s	SYS_HFGRTR_EL2, x0
+	msr_s	SYS_HFGWTR_EL2, x0
+	msr_s	SYS_HFGITR_EL2, xzr
+
+	mrs	x1, id_aa64pfr0_el1		// AMU traps UNDEF without AMU
+	ubfx	x1, x1, #ID_AA64PFR0_EL1_AMU_SHIFT, #4
+	cbz	x1, .Lskip_fgt_\@
+
+	msr_s	SYS_HAFGRTR_EL2, xzr
+.Lskip_fgt_\@:
+.endm
+
+.macro __init_el2_nvhe_prepare_eret
+	mov	x0, #INIT_PSTATE_EL1
+	msr	spsr_el2, x0
+.endm
+
+/**
+ * Initialize EL2 registers to sane values. This should be called early on all
+ * cores that were booted in EL2. Note that everything gets initialised as
+ * if VHE was not available. The kernel context will be upgraded to VHE
+ * if possible later on in the boot process
+ *
+ * Regs: x0, x1 and x2 are clobbered.
+ */
+.macro init_el2_state
+	__init_el2_sctlr
+	__init_el2_hcrx
+	__init_el2_timers
+	__init_el2_debug
+	__init_el2_lor
+	__init_el2_stage2
+	__init_el2_gicv3
+	__init_el2_hstr
+	__init_el2_nvhe_idregs
+	__init_el2_cptr
+	__init_el2_fgt
+.endm
+
+#ifndef __KVM_NVHE_HYPERVISOR__
+// This will clobber tmp1 and tmp2, and expect tmp1 to contain
+// the id register value as read from the HW
+.macro __check_override idreg, fld, width, pass, fail, tmp1, tmp2
+	ubfx	\tmp1, \tmp1, #\fld, #\width
+	cbz	\tmp1, \fail
+
+	adr_l	\tmp1, \idreg\()_override
+	ldr	\tmp2, [\tmp1, FTR_OVR_VAL_OFFSET]
+	ldr	\tmp1, [\tmp1, FTR_OVR_MASK_OFFSET]
+	ubfx	\tmp2, \tmp2, #\fld, #\width
+	ubfx	\tmp1, \tmp1, #\fld, #\width
+	cmp	\tmp1, xzr
+	and	\tmp2, \tmp2, \tmp1
+	csinv	\tmp2, \tmp2, xzr, ne
+	cbnz	\tmp2, \pass
+	b	\fail
+.endm
+
+// This will clobber tmp1 and tmp2
+.macro check_override idreg, fld, pass, fail, tmp1, tmp2
+	mrs	\tmp1, \idreg\()_el1
+	__check_override \idreg \fld 4 \pass \fail \tmp1 \tmp2
+.endm
+#else
+// This will clobber tmp
+.macro __check_override idreg, fld, width, pass, fail, tmp, ignore
+	ldr_l	\tmp, \idreg\()_el1_sys_val
+	ubfx	\tmp, \tmp, #\fld, #\width
+	cbnz	\tmp, \pass
+	b	\fail
+.endm
+
+.macro check_override idreg, fld, pass, fail, tmp, ignore
+	__check_override \idreg \fld 4 \pass \fail \tmp \ignore
+.endm
+#endif
+
+.macro finalise_el2_state
+	check_override id_aa64pfr0, ID_AA64PFR0_EL1_SVE_SHIFT, .Linit_sve_\@, .Lskip_sve_\@, x1, x2
+
+.Linit_sve_\@:	/* SVE register access */
+	__check_hvhe .Lcptr_nvhe_\@, x1
+
+	// (h)VHE case
+	mrs	x0, cpacr_el1			// Disable SVE traps
+	orr	x0, x0, #(CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN)
+	msr	cpacr_el1, x0
+	b	.Lskip_set_cptr_\@
+
+.Lcptr_nvhe_\@: // nVHE case
+	mrs	x0, cptr_el2			// Disable SVE traps
+	bic	x0, x0, #CPTR_EL2_TZ
+	msr	cptr_el2, x0
+.Lskip_set_cptr_\@:
+	isb
+	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
+	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
+
+.Lskip_sve_\@:
+	check_override id_aa64pfr1, ID_AA64PFR1_EL1_SME_SHIFT, .Linit_sme_\@, .Lskip_sme_\@, x1, x2
+
+.Linit_sme_\@:	/* SME register access and priority mapping */
+	__check_hvhe .Lcptr_nvhe_sme_\@, x1
+
+	// (h)VHE case
+	mrs	x0, cpacr_el1			// Disable SME traps
+	orr	x0, x0, #(CPACR_EL1_SMEN_EL0EN | CPACR_EL1_SMEN_EL1EN)
+	msr	cpacr_el1, x0
+	b	.Lskip_set_cptr_sme_\@
+
+.Lcptr_nvhe_sme_\@: // nVHE case
+	mrs	x0, cptr_el2			// Disable SME traps
+	bic	x0, x0, #CPTR_EL2_TSM
+	msr	cptr_el2, x0
+.Lskip_set_cptr_sme_\@:
+	isb
+
+	mrs	x1, sctlr_el2
+	orr	x1, x1, #SCTLR_ELx_ENTP2	// Disable TPIDR2 traps
+	msr	sctlr_el2, x1
+	isb
+
+	mov	x0, #0				// SMCR controls
+
+	// Full FP in SM?
+	mrs_s	x1, SYS_ID_AA64SMFR0_EL1
+	__check_override id_aa64smfr0, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, .Linit_sme_fa64_\@, .Lskip_sme_fa64_\@, x1, x2
+
+.Linit_sme_fa64_\@:
+	orr	x0, x0, SMCR_ELx_FA64_MASK
+.Lskip_sme_fa64_\@:
+
+	// ZT0 available?
+	mrs_s	x1, SYS_ID_AA64SMFR0_EL1
+	__check_override id_aa64smfr0, ID_AA64SMFR0_EL1_SMEver_SHIFT, 4, .Linit_sme_zt0_\@, .Lskip_sme_zt0_\@, x1, x2
+.Linit_sme_zt0_\@:
+	orr	x0, x0, SMCR_ELx_EZT0_MASK
+.Lskip_sme_zt0_\@:
+
+	orr	x0, x0, #SMCR_ELx_LEN_MASK	// Enable full SME vector
+	msr_s	SYS_SMCR_EL2, x0		// length for EL1.
+
+	mrs_s	x1, SYS_SMIDR_EL1		// Priority mapping supported?
+	ubfx    x1, x1, #SMIDR_EL1_SMPS_SHIFT, #1
+	cbz     x1, .Lskip_sme_\@
+
+	msr_s	SYS_SMPRIMAP_EL2, xzr		// Make all priorities equal
+.Lskip_sme_\@:
+.endm
+
+#endif /* __ARM_KVM_INIT_H__ */
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
new file mode 100644
index 000000000..97932fbf9
--- /dev/null
+++ b/arch/arm64/include/asm/elf.h
@@ -0,0 +1,298 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <asm/hwcap.h>
+
+/*
+ * ELF register definitions..
+ */
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AArch64 static relocation types.
+ */
+
+/* Miscellaneous. */
+#define R_ARM_NONE			0
+#define R_AARCH64_NONE			256
+
+/* Data. */
+#define R_AARCH64_ABS64			257
+#define R_AARCH64_ABS32			258
+#define R_AARCH64_ABS16			259
+#define R_AARCH64_PREL64		260
+#define R_AARCH64_PREL32		261
+#define R_AARCH64_PREL16		262
+
+/* Instructions. */
+#define R_AARCH64_MOVW_UABS_G0		263
+#define R_AARCH64_MOVW_UABS_G0_NC	264
+#define R_AARCH64_MOVW_UABS_G1		265
+#define R_AARCH64_MOVW_UABS_G1_NC	266
+#define R_AARCH64_MOVW_UABS_G2		267
+#define R_AARCH64_MOVW_UABS_G2_NC	268
+#define R_AARCH64_MOVW_UABS_G3		269
+
+#define R_AARCH64_MOVW_SABS_G0		270
+#define R_AARCH64_MOVW_SABS_G1		271
+#define R_AARCH64_MOVW_SABS_G2		272
+
+#define R_AARCH64_LD_PREL_LO19		273
+#define R_AARCH64_ADR_PREL_LO21		274
+#define R_AARCH64_ADR_PREL_PG_HI21	275
+#define R_AARCH64_ADR_PREL_PG_HI21_NC	276
+#define R_AARCH64_ADD_ABS_LO12_NC	277
+#define R_AARCH64_LDST8_ABS_LO12_NC	278
+
+#define R_AARCH64_TSTBR14		279
+#define R_AARCH64_CONDBR19		280
+#define R_AARCH64_JUMP26		282
+#define R_AARCH64_CALL26		283
+#define R_AARCH64_LDST16_ABS_LO12_NC	284
+#define R_AARCH64_LDST32_ABS_LO12_NC	285
+#define R_AARCH64_LDST64_ABS_LO12_NC	286
+#define R_AARCH64_LDST128_ABS_LO12_NC	299
+
+#define R_AARCH64_MOVW_PREL_G0		287
+#define R_AARCH64_MOVW_PREL_G0_NC	288
+#define R_AARCH64_MOVW_PREL_G1		289
+#define R_AARCH64_MOVW_PREL_G1_NC	290
+#define R_AARCH64_MOVW_PREL_G2		291
+#define R_AARCH64_MOVW_PREL_G2_NC	292
+#define R_AARCH64_MOVW_PREL_G3		293
+
+#define R_AARCH64_RELATIVE		1027
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#ifdef __AARCH64EB__
+#define ELF_DATA	ELFDATA2MSB
+#else
+#define ELF_DATA	ELFDATA2LSB
+#endif
+#define ELF_ARCH	EM_AARCH64
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+#define ELF_PLATFORM_SIZE	16
+#ifdef __AARCH64EB__
+#define ELF_PLATFORM		("aarch64_be")
+#else
+#define ELF_PLATFORM		("aarch64")
+#endif
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == EM_AARCH64)
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ *
+ * The decision process for determining the results are:
+ *
+ *                CPU*: | arm32      | arm64      |
+ * ELF:                 |            |            |
+ * ---------------------|------------|------------|
+ * missing PT_GNU_STACK | exec-all   | exec-none  |
+ * PT_GNU_STACK == RWX  | exec-stack | exec-stack |
+ * PT_GNU_STACK == RW   | exec-none  | exec-none  |
+ *
+ *  exec-all  : all PROT_READ user mappings are executable, except when
+ *              backed by files on a noexec-filesystem.
+ *  exec-none : only PROT_EXEC user mappings are executable.
+ *  exec-stack: only the stack and PROT_EXEC user mappings are executable.
+ *
+ *  *all arm64 CPUs support NX, so there is no "lacks NX" column.
+ *
+ */
+#define compat_elf_read_implies_exec(ex, stk)	(stk == EXSTACK_DEFAULT)
+
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the base location for PIE (ET_DYN with INTERP) loads. On
+ * 64-bit, this is above 4GB to leave the entire 32-bit address
+ * space open for things that want to use the area for 32-bit pointers.
+ */
+#ifdef CONFIG_ARM64_FORCE_52BIT
+#define ELF_ET_DYN_BASE		(2 * TASK_SIZE_64 / 3)
+#else
+#define ELF_ET_DYN_BASE		(2 * DEFAULT_MAP_WINDOW_64 / 3)
+#endif /* CONFIG_ARM64_FORCE_52BIT */
+
+#ifndef __ASSEMBLY__
+
+#include <uapi/linux/elf.h>
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/types.h>
+#include <asm/processor.h> /* for signal_minsigstksz, used by ARCH_DLINFO */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
+#define ELF_CORE_COPY_REGS(dest, regs)	\
+	*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
+
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef struct user_fpsimd_state elf_fpregset_t;
+
+/*
+ * When the program starts, a1 contains a pointer to a function to be
+ * registered with atexit, as per the SVR4 ABI.  A value of 0 means we have no
+ * such handler.
+ */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->regs[0] = 0
+
+#define SET_PERSONALITY(ex)						\
+({									\
+	clear_thread_flag(TIF_32BIT);					\
+	current->personality &= ~READ_IMPLIES_EXEC;			\
+})
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO							\
+do {									\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR,					\
+		    (elf_addr_t)current->mm->context.vdso);		\
+									\
+	/*								\
+	 * Should always be nonzero unless there's a kernel bug.	\
+	 * If we haven't determined a sensible value to give to		\
+	 * userspace, omit the entry:					\
+	 */								\
+	if (likely(signal_minsigstksz))					\
+		NEW_AUX_ENT(AT_MINSIGSTKSZ, signal_minsigstksz);	\
+	else								\
+		NEW_AUX_ENT(AT_IGNORE, 0);				\
+} while (0)
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int uses_interp);
+
+/* 1GB of VA */
+#ifdef CONFIG_COMPAT
+#define STACK_RND_MASK			(test_thread_flag(TIF_32BIT) ? \
+						0x7ff >> (PAGE_SHIFT - 12) : \
+						0x3ffff >> (PAGE_SHIFT - 12))
+#else
+#define STACK_RND_MASK			(0x3ffff >> (PAGE_SHIFT - 12))
+#endif
+
+#ifdef __AARCH64EB__
+#define COMPAT_ELF_PLATFORM		("v8b")
+#else
+#define COMPAT_ELF_PLATFORM		("v8l")
+#endif
+
+#ifdef CONFIG_COMPAT
+
+/* PIE load location for compat arm. Must match ARM ELF_ET_DYN_BASE. */
+#define COMPAT_ELF_ET_DYN_BASE		0x000400000UL
+
+/* AArch32 registers. */
+#define COMPAT_ELF_NGREG		18
+typedef unsigned int			compat_elf_greg_t;
+typedef compat_elf_greg_t		compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+/* AArch32 EABI. */
+#define EF_ARM_EABI_MASK		0xff000000
+int compat_elf_check_arch(const struct elf32_hdr *);
+#define compat_elf_check_arch		compat_elf_check_arch
+#define compat_start_thread		compat_start_thread
+/*
+ * Unlike the native SET_PERSONALITY macro, the compat version maintains
+ * READ_IMPLIES_EXEC across an execve() since this is the behaviour on
+ * arch/arm/.
+ */
+#define COMPAT_SET_PERSONALITY(ex)					\
+({									\
+	set_thread_flag(TIF_32BIT);					\
+ })
+#ifdef CONFIG_COMPAT_VDSO
+#define COMPAT_ARCH_DLINFO						\
+do {									\
+	/*								\
+	 * Note that we use Elf64_Off instead of elf_addr_t because	\
+	 * elf_addr_t in compat is defined as Elf32_Addr and casting	\
+	 * current->mm->context.vdso to it triggers a cast warning of	\
+	 * cast from pointer to integer of different size.		\
+	 */								\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR,					\
+			(Elf64_Off)current->mm->context.vdso);		\
+} while (0)
+#else
+#define COMPAT_ARCH_DLINFO
+#endif
+extern int aarch32_setup_additional_pages(struct linux_binprm *bprm,
+					  int uses_interp);
+#define compat_arch_setup_additional_pages \
+					aarch32_setup_additional_pages
+
+#endif /* CONFIG_COMPAT */
+
+struct arch_elf_state {
+	int flags;
+};
+
+#define ARM64_ELF_BTI		(1 << 0)
+
+#define INIT_ARCH_ELF_STATE {			\
+	.flags = 0,				\
+}
+
+static inline int arch_parse_elf_property(u32 type, const void *data,
+					  size_t datasz, bool compat,
+					  struct arch_elf_state *arch)
+{
+	/* No known properties for AArch32 yet */
+	if (IS_ENABLED(CONFIG_COMPAT) && compat)
+		return 0;
+
+	if (type == GNU_PROPERTY_AARCH64_FEATURE_1_AND) {
+		const u32 *p = data;
+
+		if (datasz != sizeof(*p))
+			return -ENOEXEC;
+
+		if (system_supports_bti() &&
+		    (*p & GNU_PROPERTY_AARCH64_FEATURE_1_BTI))
+			arch->flags |= ARM64_ELF_BTI;
+	}
+
+	return 0;
+}
+
+static inline int arch_elf_pt_proc(void *ehdr, void *phdr,
+				   struct file *f, bool is_interp,
+				   struct arch_elf_state *state)
+{
+	return 0;
+}
+
+static inline int arch_check_elf(void *ehdr, bool has_interp,
+				 void *interp_ehdr,
+				 struct arch_elf_state *state)
+{
+	return 0;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h
new file mode 100644
index 000000000..ae35939f3
--- /dev/null
+++ b/arch/arm64/include/asm/esr.h
@@ -0,0 +1,398 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ASM_ESR_H
+#define __ASM_ESR_H
+
+#include <asm/memory.h>
+#include <asm/sysreg.h>
+
+#define ESR_ELx_EC_UNKNOWN	(0x00)
+#define ESR_ELx_EC_WFx		(0x01)
+/* Unallocated EC: 0x02 */
+#define ESR_ELx_EC_CP15_32	(0x03)
+#define ESR_ELx_EC_CP15_64	(0x04)
+#define ESR_ELx_EC_CP14_MR	(0x05)
+#define ESR_ELx_EC_CP14_LS	(0x06)
+#define ESR_ELx_EC_FP_ASIMD	(0x07)
+#define ESR_ELx_EC_CP10_ID	(0x08)	/* EL2 only */
+#define ESR_ELx_EC_PAC		(0x09)	/* EL2 and above */
+/* Unallocated EC: 0x0A - 0x0B */
+#define ESR_ELx_EC_CP14_64	(0x0C)
+#define ESR_ELx_EC_BTI		(0x0D)
+#define ESR_ELx_EC_ILL		(0x0E)
+/* Unallocated EC: 0x0F - 0x10 */
+#define ESR_ELx_EC_SVC32	(0x11)
+#define ESR_ELx_EC_HVC32	(0x12)	/* EL2 only */
+#define ESR_ELx_EC_SMC32	(0x13)	/* EL2 and above */
+/* Unallocated EC: 0x14 */
+#define ESR_ELx_EC_SVC64	(0x15)
+#define ESR_ELx_EC_HVC64	(0x16)	/* EL2 and above */
+#define ESR_ELx_EC_SMC64	(0x17)	/* EL2 and above */
+#define ESR_ELx_EC_SYS64	(0x18)
+#define ESR_ELx_EC_SVE		(0x19)
+#define ESR_ELx_EC_ERET		(0x1a)	/* EL2 only */
+/* Unallocated EC: 0x1B */
+#define ESR_ELx_EC_FPAC		(0x1C)	/* EL1 and above */
+#define ESR_ELx_EC_SME		(0x1D)
+/* Unallocated EC: 0x1E */
+#define ESR_ELx_EC_IMP_DEF	(0x1f)	/* EL3 only */
+#define ESR_ELx_EC_IABT_LOW	(0x20)
+#define ESR_ELx_EC_IABT_CUR	(0x21)
+#define ESR_ELx_EC_PC_ALIGN	(0x22)
+/* Unallocated EC: 0x23 */
+#define ESR_ELx_EC_DABT_LOW	(0x24)
+#define ESR_ELx_EC_DABT_CUR	(0x25)
+#define ESR_ELx_EC_SP_ALIGN	(0x26)
+#define ESR_ELx_EC_MOPS		(0x27)
+#define ESR_ELx_EC_FP_EXC32	(0x28)
+/* Unallocated EC: 0x29 - 0x2B */
+#define ESR_ELx_EC_FP_EXC64	(0x2C)
+/* Unallocated EC: 0x2D - 0x2E */
+#define ESR_ELx_EC_SERROR	(0x2F)
+#define ESR_ELx_EC_BREAKPT_LOW	(0x30)
+#define ESR_ELx_EC_BREAKPT_CUR	(0x31)
+#define ESR_ELx_EC_SOFTSTP_LOW	(0x32)
+#define ESR_ELx_EC_SOFTSTP_CUR	(0x33)
+#define ESR_ELx_EC_WATCHPT_LOW	(0x34)
+#define ESR_ELx_EC_WATCHPT_CUR	(0x35)
+/* Unallocated EC: 0x36 - 0x37 */
+#define ESR_ELx_EC_BKPT32	(0x38)
+/* Unallocated EC: 0x39 */
+#define ESR_ELx_EC_VECTOR32	(0x3A)	/* EL2 only */
+/* Unallocated EC: 0x3B */
+#define ESR_ELx_EC_BRK64	(0x3C)
+/* Unallocated EC: 0x3D - 0x3F */
+#define ESR_ELx_EC_MAX		(0x3F)
+
+#define ESR_ELx_EC_SHIFT	(26)
+#define ESR_ELx_EC_WIDTH	(6)
+#define ESR_ELx_EC_MASK		(UL(0x3F) << ESR_ELx_EC_SHIFT)
+#define ESR_ELx_EC(esr)		(((esr) & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT)
+
+#define ESR_ELx_IL_SHIFT	(25)
+#define ESR_ELx_IL		(UL(1) << ESR_ELx_IL_SHIFT)
+#define ESR_ELx_ISS_MASK	(GENMASK(24, 0))
+#define ESR_ELx_ISS(esr)	((esr) & ESR_ELx_ISS_MASK)
+#define ESR_ELx_ISS2_SHIFT	(32)
+#define ESR_ELx_ISS2_MASK	(GENMASK_ULL(55, 32))
+#define ESR_ELx_ISS2(esr)	(((esr) & ESR_ELx_ISS2_MASK) >> ESR_ELx_ISS2_SHIFT)
+
+/* ISS field definitions shared by different classes */
+#define ESR_ELx_WNR_SHIFT	(6)
+#define ESR_ELx_WNR		(UL(1) << ESR_ELx_WNR_SHIFT)
+
+/* Asynchronous Error Type */
+#define ESR_ELx_IDS_SHIFT	(24)
+#define ESR_ELx_IDS		(UL(1) << ESR_ELx_IDS_SHIFT)
+#define ESR_ELx_AET_SHIFT	(10)
+#define ESR_ELx_AET		(UL(0x7) << ESR_ELx_AET_SHIFT)
+
+#define ESR_ELx_AET_UC		(UL(0) << ESR_ELx_AET_SHIFT)
+#define ESR_ELx_AET_UEU		(UL(1) << ESR_ELx_AET_SHIFT)
+#define ESR_ELx_AET_UEO		(UL(2) << ESR_ELx_AET_SHIFT)
+#define ESR_ELx_AET_UER		(UL(3) << ESR_ELx_AET_SHIFT)
+#define ESR_ELx_AET_CE		(UL(6) << ESR_ELx_AET_SHIFT)
+
+/* Shared ISS field definitions for Data/Instruction aborts */
+#define ESR_ELx_SET_SHIFT	(11)
+#define ESR_ELx_SET_MASK	(UL(3) << ESR_ELx_SET_SHIFT)
+#define ESR_ELx_FnV_SHIFT	(10)
+#define ESR_ELx_FnV		(UL(1) << ESR_ELx_FnV_SHIFT)
+#define ESR_ELx_EA_SHIFT	(9)
+#define ESR_ELx_EA		(UL(1) << ESR_ELx_EA_SHIFT)
+#define ESR_ELx_S1PTW_SHIFT	(7)
+#define ESR_ELx_S1PTW		(UL(1) << ESR_ELx_S1PTW_SHIFT)
+
+/* Shared ISS fault status code(IFSC/DFSC) for Data/Instruction aborts */
+#define ESR_ELx_FSC		(0x3F)
+#define ESR_ELx_FSC_TYPE	(0x3C)
+#define ESR_ELx_FSC_LEVEL	(0x03)
+#define ESR_ELx_FSC_EXTABT	(0x10)
+#define ESR_ELx_FSC_MTE		(0x11)
+#define ESR_ELx_FSC_SERROR	(0x11)
+#define ESR_ELx_FSC_ACCESS	(0x08)
+#define ESR_ELx_FSC_FAULT	(0x04)
+#define ESR_ELx_FSC_PERM	(0x0C)
+#define ESR_ELx_FSC_SEA_TTW0	(0x14)
+#define ESR_ELx_FSC_SEA_TTW1	(0x15)
+#define ESR_ELx_FSC_SEA_TTW2	(0x16)
+#define ESR_ELx_FSC_SEA_TTW3	(0x17)
+#define ESR_ELx_FSC_SECC	(0x18)
+#define ESR_ELx_FSC_SECC_TTW0	(0x1c)
+#define ESR_ELx_FSC_SECC_TTW1	(0x1d)
+#define ESR_ELx_FSC_SECC_TTW2	(0x1e)
+#define ESR_ELx_FSC_SECC_TTW3	(0x1f)
+
+/* ISS field definitions for Data Aborts */
+#define ESR_ELx_ISV_SHIFT	(24)
+#define ESR_ELx_ISV		(UL(1) << ESR_ELx_ISV_SHIFT)
+#define ESR_ELx_SAS_SHIFT	(22)
+#define ESR_ELx_SAS		(UL(3) << ESR_ELx_SAS_SHIFT)
+#define ESR_ELx_SSE_SHIFT	(21)
+#define ESR_ELx_SSE		(UL(1) << ESR_ELx_SSE_SHIFT)
+#define ESR_ELx_SRT_SHIFT	(16)
+#define ESR_ELx_SRT_MASK	(UL(0x1F) << ESR_ELx_SRT_SHIFT)
+#define ESR_ELx_SF_SHIFT	(15)
+#define ESR_ELx_SF 		(UL(1) << ESR_ELx_SF_SHIFT)
+#define ESR_ELx_AR_SHIFT	(14)
+#define ESR_ELx_AR 		(UL(1) << ESR_ELx_AR_SHIFT)
+#define ESR_ELx_CM_SHIFT	(8)
+#define ESR_ELx_CM 		(UL(1) << ESR_ELx_CM_SHIFT)
+
+/* ISS2 field definitions for Data Aborts */
+#define ESR_ELx_TnD_SHIFT	(10)
+#define ESR_ELx_TnD 		(UL(1) << ESR_ELx_TnD_SHIFT)
+#define ESR_ELx_TagAccess_SHIFT	(9)
+#define ESR_ELx_TagAccess	(UL(1) << ESR_ELx_TagAccess_SHIFT)
+#define ESR_ELx_GCS_SHIFT	(8)
+#define ESR_ELx_GCS 		(UL(1) << ESR_ELx_GCS_SHIFT)
+#define ESR_ELx_Overlay_SHIFT	(6)
+#define ESR_ELx_Overlay		(UL(1) << ESR_ELx_Overlay_SHIFT)
+#define ESR_ELx_DirtyBit_SHIFT	(5)
+#define ESR_ELx_DirtyBit	(UL(1) << ESR_ELx_DirtyBit_SHIFT)
+#define ESR_ELx_Xs_SHIFT	(0)
+#define ESR_ELx_Xs_MASK		(GENMASK_ULL(4, 0))
+
+/* ISS field definitions for exceptions taken in to Hyp */
+#define ESR_ELx_CV		(UL(1) << 24)
+#define ESR_ELx_COND_SHIFT	(20)
+#define ESR_ELx_COND_MASK	(UL(0xF) << ESR_ELx_COND_SHIFT)
+#define ESR_ELx_WFx_ISS_RN	(UL(0x1F) << 5)
+#define ESR_ELx_WFx_ISS_RV	(UL(1) << 2)
+#define ESR_ELx_WFx_ISS_TI	(UL(3) << 0)
+#define ESR_ELx_WFx_ISS_WFxT	(UL(2) << 0)
+#define ESR_ELx_WFx_ISS_WFI	(UL(0) << 0)
+#define ESR_ELx_WFx_ISS_WFE	(UL(1) << 0)
+#define ESR_ELx_xVC_IMM_MASK	((UL(1) << 16) - 1)
+
+#define DISR_EL1_IDS		(UL(1) << 24)
+/*
+ * DISR_EL1 and ESR_ELx share the bottom 13 bits, but the RES0 bits may mean
+ * different things in the future...
+ */
+#define DISR_EL1_ESR_MASK	(ESR_ELx_AET | ESR_ELx_EA | ESR_ELx_FSC)
+
+/* ESR value templates for specific events */
+#define ESR_ELx_WFx_MASK	(ESR_ELx_EC_MASK |			\
+				 (ESR_ELx_WFx_ISS_TI & ~ESR_ELx_WFx_ISS_WFxT))
+#define ESR_ELx_WFx_WFI_VAL	((ESR_ELx_EC_WFx << ESR_ELx_EC_SHIFT) |	\
+				 ESR_ELx_WFx_ISS_WFI)
+
+/* BRK instruction trap from AArch64 state */
+#define ESR_ELx_BRK64_ISS_COMMENT_MASK	0xffff
+
+/* ISS field definitions for System instruction traps */
+#define ESR_ELx_SYS64_ISS_RES0_SHIFT	22
+#define ESR_ELx_SYS64_ISS_RES0_MASK	(UL(0x7) << ESR_ELx_SYS64_ISS_RES0_SHIFT)
+#define ESR_ELx_SYS64_ISS_DIR_MASK	0x1
+#define ESR_ELx_SYS64_ISS_DIR_READ	0x1
+#define ESR_ELx_SYS64_ISS_DIR_WRITE	0x0
+
+#define ESR_ELx_SYS64_ISS_RT_SHIFT	5
+#define ESR_ELx_SYS64_ISS_RT_MASK	(UL(0x1f) << ESR_ELx_SYS64_ISS_RT_SHIFT)
+#define ESR_ELx_SYS64_ISS_CRM_SHIFT	1
+#define ESR_ELx_SYS64_ISS_CRM_MASK	(UL(0xf) << ESR_ELx_SYS64_ISS_CRM_SHIFT)
+#define ESR_ELx_SYS64_ISS_CRN_SHIFT	10
+#define ESR_ELx_SYS64_ISS_CRN_MASK	(UL(0xf) << ESR_ELx_SYS64_ISS_CRN_SHIFT)
+#define ESR_ELx_SYS64_ISS_OP1_SHIFT	14
+#define ESR_ELx_SYS64_ISS_OP1_MASK	(UL(0x7) << ESR_ELx_SYS64_ISS_OP1_SHIFT)
+#define ESR_ELx_SYS64_ISS_OP2_SHIFT	17
+#define ESR_ELx_SYS64_ISS_OP2_MASK	(UL(0x7) << ESR_ELx_SYS64_ISS_OP2_SHIFT)
+#define ESR_ELx_SYS64_ISS_OP0_SHIFT	20
+#define ESR_ELx_SYS64_ISS_OP0_MASK	(UL(0x3) << ESR_ELx_SYS64_ISS_OP0_SHIFT)
+#define ESR_ELx_SYS64_ISS_SYS_MASK	(ESR_ELx_SYS64_ISS_OP0_MASK | \
+					 ESR_ELx_SYS64_ISS_OP1_MASK | \
+					 ESR_ELx_SYS64_ISS_OP2_MASK | \
+					 ESR_ELx_SYS64_ISS_CRN_MASK | \
+					 ESR_ELx_SYS64_ISS_CRM_MASK)
+#define ESR_ELx_SYS64_ISS_SYS_VAL(op0, op1, op2, crn, crm) \
+					(((op0) << ESR_ELx_SYS64_ISS_OP0_SHIFT) | \
+					 ((op1) << ESR_ELx_SYS64_ISS_OP1_SHIFT) | \
+					 ((op2) << ESR_ELx_SYS64_ISS_OP2_SHIFT) | \
+					 ((crn) << ESR_ELx_SYS64_ISS_CRN_SHIFT) | \
+					 ((crm) << ESR_ELx_SYS64_ISS_CRM_SHIFT))
+
+#define ESR_ELx_SYS64_ISS_SYS_OP_MASK	(ESR_ELx_SYS64_ISS_SYS_MASK | \
+					 ESR_ELx_SYS64_ISS_DIR_MASK)
+#define ESR_ELx_SYS64_ISS_RT(esr) \
+	(((esr) & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT)
+/*
+ * User space cache operations have the following sysreg encoding
+ * in System instructions.
+ * op0=1, op1=3, op2=1, crn=7, crm={ 5, 10, 11, 12, 13, 14 }, WRITE (L=0)
+ */
+#define ESR_ELx_SYS64_ISS_CRM_DC_CIVAC	14
+#define ESR_ELx_SYS64_ISS_CRM_DC_CVADP	13
+#define ESR_ELx_SYS64_ISS_CRM_DC_CVAP	12
+#define ESR_ELx_SYS64_ISS_CRM_DC_CVAU	11
+#define ESR_ELx_SYS64_ISS_CRM_DC_CVAC	10
+#define ESR_ELx_SYS64_ISS_CRM_IC_IVAU	5
+
+#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK	(ESR_ELx_SYS64_ISS_OP0_MASK | \
+						 ESR_ELx_SYS64_ISS_OP1_MASK | \
+						 ESR_ELx_SYS64_ISS_OP2_MASK | \
+						 ESR_ELx_SYS64_ISS_CRN_MASK | \
+						 ESR_ELx_SYS64_ISS_DIR_MASK)
+#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL \
+				(ESR_ELx_SYS64_ISS_SYS_VAL(1, 3, 1, 7, 0) | \
+				 ESR_ELx_SYS64_ISS_DIR_WRITE)
+/*
+ * User space MRS operations which are supported for emulation
+ * have the following sysreg encoding in System instructions.
+ * op0 = 3, op1= 0, crn = 0, {crm = 0, 4-7}, READ (L = 1)
+ */
+#define ESR_ELx_SYS64_ISS_SYS_MRS_OP_MASK	(ESR_ELx_SYS64_ISS_OP0_MASK | \
+						 ESR_ELx_SYS64_ISS_OP1_MASK | \
+						 ESR_ELx_SYS64_ISS_CRN_MASK | \
+						 ESR_ELx_SYS64_ISS_DIR_MASK)
+#define ESR_ELx_SYS64_ISS_SYS_MRS_OP_VAL \
+				(ESR_ELx_SYS64_ISS_SYS_VAL(3, 0, 0, 0, 0) | \
+				 ESR_ELx_SYS64_ISS_DIR_READ)
+
+#define ESR_ELx_SYS64_ISS_SYS_CTR	ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 1, 0, 0)
+#define ESR_ELx_SYS64_ISS_SYS_CTR_READ	(ESR_ELx_SYS64_ISS_SYS_CTR | \
+					 ESR_ELx_SYS64_ISS_DIR_READ)
+
+#define ESR_ELx_SYS64_ISS_SYS_CNTVCT	(ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 2, 14, 0) | \
+					 ESR_ELx_SYS64_ISS_DIR_READ)
+
+#define ESR_ELx_SYS64_ISS_SYS_CNTVCTSS	(ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 6, 14, 0) | \
+					 ESR_ELx_SYS64_ISS_DIR_READ)
+
+#define ESR_ELx_SYS64_ISS_SYS_CNTFRQ	(ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 0, 14, 0) | \
+					 ESR_ELx_SYS64_ISS_DIR_READ)
+
+#define esr_sys64_to_sysreg(e)					\
+	sys_reg((((e) & ESR_ELx_SYS64_ISS_OP0_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_OP0_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_OP1_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_OP1_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_CRN_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_CRN_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_CRM_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_CRM_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_OP2_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_OP2_SHIFT))
+
+#define esr_cp15_to_sysreg(e)					\
+	sys_reg(3,						\
+		(((e) & ESR_ELx_SYS64_ISS_OP1_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_OP1_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_CRN_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_CRN_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_CRM_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_CRM_SHIFT),			\
+		(((e) & ESR_ELx_SYS64_ISS_OP2_MASK) >>		\
+		 ESR_ELx_SYS64_ISS_OP2_SHIFT))
+
+/* ISS field definitions for ERET/ERETAA/ERETAB trapping */
+#define ESR_ELx_ERET_ISS_ERET		0x2
+#define ESR_ELx_ERET_ISS_ERETA		0x1
+
+/*
+ * ISS field definitions for floating-point exception traps
+ * (FP_EXC_32/FP_EXC_64).
+ *
+ * (The FPEXC_* constants are used instead for common bits.)
+ */
+
+#define ESR_ELx_FP_EXC_TFV	(UL(1) << 23)
+
+/*
+ * ISS field definitions for CP15 accesses
+ */
+#define ESR_ELx_CP15_32_ISS_DIR_MASK	0x1
+#define ESR_ELx_CP15_32_ISS_DIR_READ	0x1
+#define ESR_ELx_CP15_32_ISS_DIR_WRITE	0x0
+
+#define ESR_ELx_CP15_32_ISS_RT_SHIFT	5
+#define ESR_ELx_CP15_32_ISS_RT_MASK	(UL(0x1f) << ESR_ELx_CP15_32_ISS_RT_SHIFT)
+#define ESR_ELx_CP15_32_ISS_CRM_SHIFT	1
+#define ESR_ELx_CP15_32_ISS_CRM_MASK	(UL(0xf) << ESR_ELx_CP15_32_ISS_CRM_SHIFT)
+#define ESR_ELx_CP15_32_ISS_CRN_SHIFT	10
+#define ESR_ELx_CP15_32_ISS_CRN_MASK	(UL(0xf) << ESR_ELx_CP15_32_ISS_CRN_SHIFT)
+#define ESR_ELx_CP15_32_ISS_OP1_SHIFT	14
+#define ESR_ELx_CP15_32_ISS_OP1_MASK	(UL(0x7) << ESR_ELx_CP15_32_ISS_OP1_SHIFT)
+#define ESR_ELx_CP15_32_ISS_OP2_SHIFT	17
+#define ESR_ELx_CP15_32_ISS_OP2_MASK	(UL(0x7) << ESR_ELx_CP15_32_ISS_OP2_SHIFT)
+
+#define ESR_ELx_CP15_32_ISS_SYS_MASK	(ESR_ELx_CP15_32_ISS_OP1_MASK | \
+					 ESR_ELx_CP15_32_ISS_OP2_MASK | \
+					 ESR_ELx_CP15_32_ISS_CRN_MASK | \
+					 ESR_ELx_CP15_32_ISS_CRM_MASK | \
+					 ESR_ELx_CP15_32_ISS_DIR_MASK)
+#define ESR_ELx_CP15_32_ISS_SYS_VAL(op1, op2, crn, crm) \
+					(((op1) << ESR_ELx_CP15_32_ISS_OP1_SHIFT) | \
+					 ((op2) << ESR_ELx_CP15_32_ISS_OP2_SHIFT) | \
+					 ((crn) << ESR_ELx_CP15_32_ISS_CRN_SHIFT) | \
+					 ((crm) << ESR_ELx_CP15_32_ISS_CRM_SHIFT))
+
+#define ESR_ELx_CP15_64_ISS_DIR_MASK	0x1
+#define ESR_ELx_CP15_64_ISS_DIR_READ	0x1
+#define ESR_ELx_CP15_64_ISS_DIR_WRITE	0x0
+
+#define ESR_ELx_CP15_64_ISS_RT_SHIFT	5
+#define ESR_ELx_CP15_64_ISS_RT_MASK	(UL(0x1f) << ESR_ELx_CP15_64_ISS_RT_SHIFT)
+
+#define ESR_ELx_CP15_64_ISS_RT2_SHIFT	10
+#define ESR_ELx_CP15_64_ISS_RT2_MASK	(UL(0x1f) << ESR_ELx_CP15_64_ISS_RT2_SHIFT)
+
+#define ESR_ELx_CP15_64_ISS_OP1_SHIFT	16
+#define ESR_ELx_CP15_64_ISS_OP1_MASK	(UL(0xf) << ESR_ELx_CP15_64_ISS_OP1_SHIFT)
+#define ESR_ELx_CP15_64_ISS_CRM_SHIFT	1
+#define ESR_ELx_CP15_64_ISS_CRM_MASK	(UL(0xf) << ESR_ELx_CP15_64_ISS_CRM_SHIFT)
+
+#define ESR_ELx_CP15_64_ISS_SYS_VAL(op1, crm) \
+					(((op1) << ESR_ELx_CP15_64_ISS_OP1_SHIFT) | \
+					 ((crm) << ESR_ELx_CP15_64_ISS_CRM_SHIFT))
+
+#define ESR_ELx_CP15_64_ISS_SYS_MASK	(ESR_ELx_CP15_64_ISS_OP1_MASK |	\
+					 ESR_ELx_CP15_64_ISS_CRM_MASK | \
+					 ESR_ELx_CP15_64_ISS_DIR_MASK)
+
+#define ESR_ELx_CP15_64_ISS_SYS_CNTVCT	(ESR_ELx_CP15_64_ISS_SYS_VAL(1, 14) | \
+					 ESR_ELx_CP15_64_ISS_DIR_READ)
+
+#define ESR_ELx_CP15_64_ISS_SYS_CNTVCTSS (ESR_ELx_CP15_64_ISS_SYS_VAL(9, 14) | \
+					 ESR_ELx_CP15_64_ISS_DIR_READ)
+
+#define ESR_ELx_CP15_32_ISS_SYS_CNTFRQ	(ESR_ELx_CP15_32_ISS_SYS_VAL(0, 0, 14, 0) |\
+					 ESR_ELx_CP15_32_ISS_DIR_READ)
+
+/*
+ * ISS values for SME traps
+ */
+
+#define ESR_ELx_SME_ISS_SME_DISABLED	0
+#define ESR_ELx_SME_ISS_ILL		1
+#define ESR_ELx_SME_ISS_SM_DISABLED	2
+#define ESR_ELx_SME_ISS_ZA_DISABLED	3
+#define ESR_ELx_SME_ISS_ZT_DISABLED	4
+
+/* ISS field definitions for MOPS exceptions */
+#define ESR_ELx_MOPS_ISS_MEM_INST	(UL(1) << 24)
+#define ESR_ELx_MOPS_ISS_FROM_EPILOGUE	(UL(1) << 18)
+#define ESR_ELx_MOPS_ISS_WRONG_OPTION	(UL(1) << 17)
+#define ESR_ELx_MOPS_ISS_OPTION_A	(UL(1) << 16)
+#define ESR_ELx_MOPS_ISS_DESTREG(esr)	(((esr) & (UL(0x1f) << 10)) >> 10)
+#define ESR_ELx_MOPS_ISS_SRCREG(esr)	(((esr) & (UL(0x1f) << 5)) >> 5)
+#define ESR_ELx_MOPS_ISS_SIZEREG(esr)	(((esr) & (UL(0x1f) << 0)) >> 0)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+static inline bool esr_is_data_abort(unsigned long esr)
+{
+	const unsigned long ec = ESR_ELx_EC(esr);
+
+	return ec == ESR_ELx_EC_DABT_LOW || ec == ESR_ELx_EC_DABT_CUR;
+}
+
+const char *esr_get_class_string(unsigned long esr);
+#endif /* __ASSEMBLY */
+
+#endif /* __ASM_ESR_H */
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
new file mode 100644
index 000000000..ad688e157
--- /dev/null
+++ b/arch/arm64/include/asm/exception.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/exception.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_EXCEPTION_H
+#define __ASM_EXCEPTION_H
+
+#include <asm/esr.h>
+#include <asm/ptrace.h>
+
+#include <linux/interrupt.h>
+
+#define __exception_irq_entry	__irq_entry
+
+static inline unsigned long disr_to_esr(u64 disr)
+{
+	unsigned long esr = ESR_ELx_EC_SERROR << ESR_ELx_EC_SHIFT;
+
+	if ((disr & DISR_EL1_IDS) == 0)
+		esr |= (disr & DISR_EL1_ESR_MASK);
+	else
+		esr |= (disr & ESR_ELx_ISS_MASK);
+
+	return esr;
+}
+
+asmlinkage void __noreturn handle_bad_stack(struct pt_regs *regs);
+
+asmlinkage void el1t_64_sync_handler(struct pt_regs *regs);
+asmlinkage void el1t_64_irq_handler(struct pt_regs *regs);
+asmlinkage void el1t_64_fiq_handler(struct pt_regs *regs);
+asmlinkage void el1t_64_error_handler(struct pt_regs *regs);
+
+asmlinkage void el1h_64_sync_handler(struct pt_regs *regs);
+asmlinkage void el1h_64_irq_handler(struct pt_regs *regs);
+asmlinkage void el1h_64_fiq_handler(struct pt_regs *regs);
+asmlinkage void el1h_64_error_handler(struct pt_regs *regs);
+
+asmlinkage void el0t_64_sync_handler(struct pt_regs *regs);
+asmlinkage void el0t_64_irq_handler(struct pt_regs *regs);
+asmlinkage void el0t_64_fiq_handler(struct pt_regs *regs);
+asmlinkage void el0t_64_error_handler(struct pt_regs *regs);
+
+asmlinkage void el0t_32_sync_handler(struct pt_regs *regs);
+asmlinkage void el0t_32_irq_handler(struct pt_regs *regs);
+asmlinkage void el0t_32_fiq_handler(struct pt_regs *regs);
+asmlinkage void el0t_32_error_handler(struct pt_regs *regs);
+
+asmlinkage void call_on_irq_stack(struct pt_regs *regs,
+				  void (*func)(struct pt_regs *));
+asmlinkage void asm_exit_to_user_mode(struct pt_regs *regs);
+
+void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs);
+void do_el0_undef(struct pt_regs *regs, unsigned long esr);
+void do_el1_undef(struct pt_regs *regs, unsigned long esr);
+void do_el0_bti(struct pt_regs *regs);
+void do_el1_bti(struct pt_regs *regs, unsigned long esr);
+void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
+			struct pt_regs *regs);
+void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs);
+void do_sve_acc(unsigned long esr, struct pt_regs *regs);
+void do_sme_acc(unsigned long esr, struct pt_regs *regs);
+void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs);
+void do_el0_sys(unsigned long esr, struct pt_regs *regs);
+void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs);
+void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr);
+void do_el0_cp15(unsigned long esr, struct pt_regs *regs);
+int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs);
+void do_el0_svc(struct pt_regs *regs);
+void do_el0_svc_compat(struct pt_regs *regs);
+void do_el0_fpac(struct pt_regs *regs, unsigned long esr);
+void do_el1_fpac(struct pt_regs *regs, unsigned long esr);
+void do_el0_mops(struct pt_regs *regs, unsigned long esr);
+void do_serror(struct pt_regs *regs, unsigned long esr);
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags);
+
+void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
+#endif	/* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/include/asm/exec.h b/arch/arm64/include/asm/exec.h
new file mode 100644
index 000000000..9a1c22ce6
--- /dev/null
+++ b/arch/arm64/include/asm/exec.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/exec.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_EXEC_H
+#define __ASM_EXEC_H
+
+#include <linux/sched.h>
+
+extern unsigned long arch_align_stack(unsigned long sp);
+
+#endif	/* __ASM_EXEC_H */
diff --git a/arch/arm64/include/asm/extable.h b/arch/arm64/include/asm/extable.h
new file mode 100644
index 000000000..72b0e71cc
--- /dev/null
+++ b/arch/arm64/include/asm/extable.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_EXTABLE_H
+#define __ASM_EXTABLE_H
+
+/*
+ * The exception table consists of pairs of relative offsets: the first
+ * is the relative offset to an instruction that is allowed to fault,
+ * and the second is the relative offset at which the program should
+ * continue. No registers are modified, so it is entirely up to the
+ * continuation code to figure out what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	int insn, fixup;
+	short type, data;
+};
+
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)		\
+do {							\
+	(a)->fixup = (b)->fixup + (delta);		\
+	(b)->fixup = (tmp).fixup - (delta);		\
+	(a)->type = (b)->type;				\
+	(b)->type = (tmp).type;				\
+	(a)->data = (b)->data;				\
+	(b)->data = (tmp).data;				\
+} while (0)
+
+#ifdef CONFIG_BPF_JIT
+bool ex_handler_bpf(const struct exception_table_entry *ex,
+		    struct pt_regs *regs);
+#else /* !CONFIG_BPF_JIT */
+static inline
+bool ex_handler_bpf(const struct exception_table_entry *ex,
+		    struct pt_regs *regs)
+{
+	return false;
+}
+#endif /* !CONFIG_BPF_JIT */
+
+bool fixup_exception(struct pt_regs *regs);
+#endif
diff --git a/arch/arm64/include/asm/fb.h b/arch/arm64/include/asm/fb.h
new file mode 100644
index 000000000..1a495d8fb
--- /dev/null
+++ b/arch/arm64/include/asm/fb.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_FB_H_
+#define __ASM_FB_H_
+
+#include <asm-generic/fb.h>
+
+#endif /* __ASM_FB_H_ */
diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h
new file mode 100644
index 000000000..58c294a96
--- /dev/null
+++ b/arch/arm64/include/asm/fixmap.h
@@ -0,0 +1,115 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ * Copyright (C) 2013 Mark Salter <msalter@redhat.com>
+ *
+ * Adapted from arch/x86 version.
+ *
+ */
+
+#ifndef _ASM_ARM64_FIXMAP_H
+#define _ASM_ARM64_FIXMAP_H
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <linux/math.h>
+#include <linux/sizes.h>
+#include <asm/boot.h>
+#include <asm/page.h>
+#include <asm/pgtable-prot.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process.
+ *
+ * Each enum increment in these 'compile-time allocated'
+ * memory buffers is page-sized. Use set_fixmap(idx,phys)
+ * to associate physical memory with a fixmap index.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+
+	/*
+	 * Reserve a virtual window for the FDT that is a page bigger than the
+	 * maximum supported size. The additional space ensures that any FDT
+	 * that does not exceed MAX_FDT_SIZE can be mapped regardless of
+	 * whether it crosses any page boundary.
+	 */
+	FIX_FDT_END,
+	FIX_FDT = FIX_FDT_END + DIV_ROUND_UP(MAX_FDT_SIZE, PAGE_SIZE) + 1,
+
+	FIX_EARLYCON_MEM_BASE,
+	FIX_TEXT_POKE0,
+
+#ifdef CONFIG_ACPI_APEI_GHES
+	/* Used for GHES mapping from assorted contexts */
+	FIX_APEI_GHES_IRQ,
+	FIX_APEI_GHES_SEA,
+#ifdef CONFIG_ARM_SDE_INTERFACE
+	FIX_APEI_GHES_SDEI_NORMAL,
+	FIX_APEI_GHES_SDEI_CRITICAL,
+#endif
+#endif /* CONFIG_ACPI_APEI_GHES */
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+#ifdef CONFIG_RELOCATABLE
+	FIX_ENTRY_TRAMP_TEXT4,	/* one extra slot for the data page */
+#endif
+	FIX_ENTRY_TRAMP_TEXT3,
+	FIX_ENTRY_TRAMP_TEXT2,
+	FIX_ENTRY_TRAMP_TEXT1,
+#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT1))
+#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
+	__end_of_permanent_fixed_addresses,
+
+	/*
+	 * Temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 */
+#define NR_FIX_BTMAPS		(SZ_256K / PAGE_SIZE)
+#define FIX_BTMAPS_SLOTS	7
+#define TOTAL_FIX_BTMAPS	(NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
+
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
+
+	/*
+	 * Used for kernel page table creation, so unmapped memory may be used
+	 * for tables.
+	 */
+	FIX_PTE,
+	FIX_PMD,
+	FIX_PUD,
+	FIX_PGD,
+
+	__end_of_fixed_addresses
+};
+
+#define FIXADDR_SIZE		(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
+#define FIXADDR_TOT_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_TOT_START	(FIXADDR_TOP - FIXADDR_TOT_SIZE)
+
+#define FIXMAP_PAGE_IO     __pgprot(PROT_DEVICE_nGnRE)
+
+void __init early_fixmap_init(void);
+void __init fixmap_copy(pgd_t *pgdir);
+
+#define __early_set_fixmap __set_fixmap
+
+#define __late_set_fixmap __set_fixmap
+#define __late_clear_fixmap(idx) __set_fixmap((idx), 0, FIXMAP_PAGE_CLEAR)
+
+extern void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot);
+
+#include <asm-generic/fixmap.h>
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_ARM64_FIXMAP_H */
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h
new file mode 100644
index 000000000..8df46f186
--- /dev/null
+++ b/arch/arm64/include/asm/fpsimd.h
@@ -0,0 +1,412 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_FP_H
+#define __ASM_FP_H
+
+#include <asm/errno.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/sysreg.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitmap.h>
+#include <linux/build_bug.h>
+#include <linux/bug.h>
+#include <linux/cache.h>
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#ifdef CONFIG_COMPAT
+/* Masks for extracting the FPSR and FPCR from the FPSCR */
+#define VFP_FPSCR_STAT_MASK	0xf800009f
+#define VFP_FPSCR_CTRL_MASK	0x07f79f00
+/*
+ * The VFP state has 32x64-bit registers and a single 32-bit
+ * control/status register.
+ */
+#define VFP_STATE_SIZE		((32 * 8) + 4)
+#endif
+
+/*
+ * When we defined the maximum SVE vector length we defined the ABI so
+ * that the maximum vector length included all the reserved for future
+ * expansion bits in ZCR rather than those just currently defined by
+ * the architecture. While SME follows a similar pattern the fact that
+ * it includes a square matrix means that any allocations that attempt
+ * to cover the maximum potential vector length (such as happen with
+ * the regset used for ptrace) end up being extremely large. Define
+ * the much lower actual limit for use in such situations.
+ */
+#define SME_VQ_MAX	16
+
+struct task_struct;
+
+extern void fpsimd_save_state(struct user_fpsimd_state *state);
+extern void fpsimd_load_state(struct user_fpsimd_state *state);
+
+extern void fpsimd_thread_switch(struct task_struct *next);
+extern void fpsimd_flush_thread(void);
+
+extern void fpsimd_signal_preserve_current_state(void);
+extern void fpsimd_preserve_current_state(void);
+extern void fpsimd_restore_current_state(void);
+extern void fpsimd_update_current_state(struct user_fpsimd_state const *state);
+extern void fpsimd_kvm_prepare(void);
+
+struct cpu_fp_state {
+	struct user_fpsimd_state *st;
+	void *sve_state;
+	void *sme_state;
+	u64 *svcr;
+	unsigned int sve_vl;
+	unsigned int sme_vl;
+	enum fp_type *fp_type;
+	enum fp_type to_save;
+};
+
+extern void fpsimd_bind_state_to_cpu(struct cpu_fp_state *fp_state);
+
+extern void fpsimd_flush_task_state(struct task_struct *target);
+extern void fpsimd_save_and_flush_cpu_state(void);
+
+static inline bool thread_sm_enabled(struct thread_struct *thread)
+{
+	return system_supports_sme() && (thread->svcr & SVCR_SM_MASK);
+}
+
+static inline bool thread_za_enabled(struct thread_struct *thread)
+{
+	return system_supports_sme() && (thread->svcr & SVCR_ZA_MASK);
+}
+
+/* Maximum VL that SVE/SME VL-agnostic software can transparently support */
+#define VL_ARCH_MAX 0x100
+
+/* Offset of FFR in the SVE register dump */
+static inline size_t sve_ffr_offset(int vl)
+{
+	return SVE_SIG_FFR_OFFSET(sve_vq_from_vl(vl)) - SVE_SIG_REGS_OFFSET;
+}
+
+static inline void *sve_pffr(struct thread_struct *thread)
+{
+	unsigned int vl;
+
+	if (system_supports_sme() && thread_sm_enabled(thread))
+		vl = thread_get_sme_vl(thread);
+	else
+		vl = thread_get_sve_vl(thread);
+
+	return (char *)thread->sve_state + sve_ffr_offset(vl);
+}
+
+static inline void *thread_zt_state(struct thread_struct *thread)
+{
+	/* The ZT register state is stored immediately after the ZA state */
+	unsigned int sme_vq = sve_vq_from_vl(thread_get_sme_vl(thread));
+	return thread->sme_state + ZA_SIG_REGS_SIZE(sme_vq);
+}
+
+extern void sve_save_state(void *state, u32 *pfpsr, int save_ffr);
+extern void sve_load_state(void const *state, u32 const *pfpsr,
+			   int restore_ffr);
+extern void sve_flush_live(bool flush_ffr, unsigned long vq_minus_1);
+extern unsigned int sve_get_vl(void);
+extern void sve_set_vq(unsigned long vq_minus_1);
+extern void sme_set_vq(unsigned long vq_minus_1);
+extern void sme_save_state(void *state, int zt);
+extern void sme_load_state(void const *state, int zt);
+
+struct arm64_cpu_capabilities;
+extern void sve_kernel_enable(const struct arm64_cpu_capabilities *__unused);
+extern void sme_kernel_enable(const struct arm64_cpu_capabilities *__unused);
+extern void sme2_kernel_enable(const struct arm64_cpu_capabilities *__unused);
+extern void fa64_kernel_enable(const struct arm64_cpu_capabilities *__unused);
+
+extern u64 read_zcr_features(void);
+extern u64 read_smcr_features(void);
+
+/*
+ * Helpers to translate bit indices in sve_vq_map to VQ values (and
+ * vice versa).  This allows find_next_bit() to be used to find the
+ * _maximum_ VQ not exceeding a certain value.
+ */
+static inline unsigned int __vq_to_bit(unsigned int vq)
+{
+	return SVE_VQ_MAX - vq;
+}
+
+static inline unsigned int __bit_to_vq(unsigned int bit)
+{
+	return SVE_VQ_MAX - bit;
+}
+
+
+struct vl_info {
+	enum vec_type type;
+	const char *name;		/* For display purposes */
+
+	/* Minimum supported vector length across all CPUs */
+	int min_vl;
+
+	/* Maximum supported vector length across all CPUs */
+	int max_vl;
+	int max_virtualisable_vl;
+
+	/*
+	 * Set of available vector lengths,
+	 * where length vq encoded as bit __vq_to_bit(vq):
+	 */
+	DECLARE_BITMAP(vq_map, SVE_VQ_MAX);
+
+	/* Set of vector lengths present on at least one cpu: */
+	DECLARE_BITMAP(vq_partial_map, SVE_VQ_MAX);
+};
+
+#ifdef CONFIG_ARM64_SVE
+
+extern void sve_alloc(struct task_struct *task, bool flush);
+extern void fpsimd_release_task(struct task_struct *task);
+extern void fpsimd_sync_to_sve(struct task_struct *task);
+extern void fpsimd_force_sync_to_sve(struct task_struct *task);
+extern void sve_sync_to_fpsimd(struct task_struct *task);
+extern void sve_sync_from_fpsimd_zeropad(struct task_struct *task);
+
+extern int vec_set_vector_length(struct task_struct *task, enum vec_type type,
+				 unsigned long vl, unsigned long flags);
+
+extern int sve_set_current_vl(unsigned long arg);
+extern int sve_get_current_vl(void);
+
+static inline void sve_user_disable(void)
+{
+	sysreg_clear_set(cpacr_el1, CPACR_EL1_ZEN_EL0EN, 0);
+}
+
+static inline void sve_user_enable(void)
+{
+	sysreg_clear_set(cpacr_el1, 0, CPACR_EL1_ZEN_EL0EN);
+}
+
+#define sve_cond_update_zcr_vq(val, reg)		\
+	do {						\
+		u64 __zcr = read_sysreg_s((reg));	\
+		u64 __new = __zcr & ~ZCR_ELx_LEN_MASK;	\
+		__new |= (val) & ZCR_ELx_LEN_MASK;	\
+		if (__zcr != __new)			\
+			write_sysreg_s(__new, (reg));	\
+	} while (0)
+
+/*
+ * Probing and setup functions.
+ * Calls to these functions must be serialised with one another.
+ */
+enum vec_type;
+
+extern void __init vec_init_vq_map(enum vec_type type);
+extern void vec_update_vq_map(enum vec_type type);
+extern int vec_verify_vq_map(enum vec_type type);
+extern void __init sve_setup(void);
+
+extern __ro_after_init struct vl_info vl_info[ARM64_VEC_MAX];
+
+static inline void write_vl(enum vec_type type, u64 val)
+{
+	u64 tmp;
+
+	switch (type) {
+#ifdef CONFIG_ARM64_SVE
+	case ARM64_VEC_SVE:
+		tmp = read_sysreg_s(SYS_ZCR_EL1) & ~ZCR_ELx_LEN_MASK;
+		write_sysreg_s(tmp | val, SYS_ZCR_EL1);
+		break;
+#endif
+#ifdef CONFIG_ARM64_SME
+	case ARM64_VEC_SME:
+		tmp = read_sysreg_s(SYS_SMCR_EL1) & ~SMCR_ELx_LEN_MASK;
+		write_sysreg_s(tmp | val, SYS_SMCR_EL1);
+		break;
+#endif
+	default:
+		WARN_ON_ONCE(1);
+		break;
+	}
+}
+
+static inline int vec_max_vl(enum vec_type type)
+{
+	return vl_info[type].max_vl;
+}
+
+static inline int vec_max_virtualisable_vl(enum vec_type type)
+{
+	return vl_info[type].max_virtualisable_vl;
+}
+
+static inline int sve_max_vl(void)
+{
+	return vec_max_vl(ARM64_VEC_SVE);
+}
+
+static inline int sve_max_virtualisable_vl(void)
+{
+	return vec_max_virtualisable_vl(ARM64_VEC_SVE);
+}
+
+/* Ensure vq >= SVE_VQ_MIN && vq <= SVE_VQ_MAX before calling this function */
+static inline bool vq_available(enum vec_type type, unsigned int vq)
+{
+	return test_bit(__vq_to_bit(vq), vl_info[type].vq_map);
+}
+
+static inline bool sve_vq_available(unsigned int vq)
+{
+	return vq_available(ARM64_VEC_SVE, vq);
+}
+
+size_t sve_state_size(struct task_struct const *task);
+
+#else /* ! CONFIG_ARM64_SVE */
+
+static inline void sve_alloc(struct task_struct *task, bool flush) { }
+static inline void fpsimd_release_task(struct task_struct *task) { }
+static inline void sve_sync_to_fpsimd(struct task_struct *task) { }
+static inline void sve_sync_from_fpsimd_zeropad(struct task_struct *task) { }
+
+static inline int sve_max_virtualisable_vl(void)
+{
+	return 0;
+}
+
+static inline int sve_set_current_vl(unsigned long arg)
+{
+	return -EINVAL;
+}
+
+static inline int sve_get_current_vl(void)
+{
+	return -EINVAL;
+}
+
+static inline int sve_max_vl(void)
+{
+	return -EINVAL;
+}
+
+static inline bool sve_vq_available(unsigned int vq) { return false; }
+
+static inline void sve_user_disable(void) { BUILD_BUG(); }
+static inline void sve_user_enable(void) { BUILD_BUG(); }
+
+#define sve_cond_update_zcr_vq(val, reg) do { } while (0)
+
+static inline void vec_init_vq_map(enum vec_type t) { }
+static inline void vec_update_vq_map(enum vec_type t) { }
+static inline int vec_verify_vq_map(enum vec_type t) { return 0; }
+static inline void sve_setup(void) { }
+
+static inline size_t sve_state_size(struct task_struct const *task)
+{
+	return 0;
+}
+
+#endif /* ! CONFIG_ARM64_SVE */
+
+#ifdef CONFIG_ARM64_SME
+
+static inline void sme_user_disable(void)
+{
+	sysreg_clear_set(cpacr_el1, CPACR_EL1_SMEN_EL0EN, 0);
+}
+
+static inline void sme_user_enable(void)
+{
+	sysreg_clear_set(cpacr_el1, 0, CPACR_EL1_SMEN_EL0EN);
+}
+
+static inline void sme_smstart_sm(void)
+{
+	asm volatile(__msr_s(SYS_SVCR_SMSTART_SM_EL0, "xzr"));
+}
+
+static inline void sme_smstop_sm(void)
+{
+	asm volatile(__msr_s(SYS_SVCR_SMSTOP_SM_EL0, "xzr"));
+}
+
+static inline void sme_smstop(void)
+{
+	asm volatile(__msr_s(SYS_SVCR_SMSTOP_SMZA_EL0, "xzr"));
+}
+
+extern void __init sme_setup(void);
+
+static inline int sme_max_vl(void)
+{
+	return vec_max_vl(ARM64_VEC_SME);
+}
+
+static inline int sme_max_virtualisable_vl(void)
+{
+	return vec_max_virtualisable_vl(ARM64_VEC_SME);
+}
+
+extern void sme_alloc(struct task_struct *task, bool flush);
+extern unsigned int sme_get_vl(void);
+extern int sme_set_current_vl(unsigned long arg);
+extern int sme_get_current_vl(void);
+
+/*
+ * Return how many bytes of memory are required to store the full SME
+ * specific state for task, given task's currently configured vector
+ * length.
+ */
+static inline size_t sme_state_size(struct task_struct const *task)
+{
+	unsigned int vl = task_get_sme_vl(task);
+	size_t size;
+
+	size = ZA_SIG_REGS_SIZE(sve_vq_from_vl(vl));
+
+	if (system_supports_sme2())
+		size += ZT_SIG_REG_SIZE;
+
+	return size;
+}
+
+#else
+
+static inline void sme_user_disable(void) { BUILD_BUG(); }
+static inline void sme_user_enable(void) { BUILD_BUG(); }
+
+static inline void sme_smstart_sm(void) { }
+static inline void sme_smstop_sm(void) { }
+static inline void sme_smstop(void) { }
+
+static inline void sme_alloc(struct task_struct *task, bool flush) { }
+static inline void sme_setup(void) { }
+static inline unsigned int sme_get_vl(void) { return 0; }
+static inline int sme_max_vl(void) { return 0; }
+static inline int sme_max_virtualisable_vl(void) { return 0; }
+static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; }
+static inline int sme_get_current_vl(void) { return -EINVAL; }
+
+static inline size_t sme_state_size(struct task_struct const *task)
+{
+	return 0;
+}
+
+#endif /* ! CONFIG_ARM64_SME */
+
+/* For use by EFI runtime services calls only */
+extern void __efi_fpsimd_begin(void);
+extern void __efi_fpsimd_end(void);
+
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/fpsimdmacros.h b/arch/arm64/include/asm/fpsimdmacros.h
new file mode 100644
index 000000000..cdf6a35e3
--- /dev/null
+++ b/arch/arm64/include/asm/fpsimdmacros.h
@@ -0,0 +1,365 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * FP/SIMD state saving and restoring macros
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <asm/assembler.h>
+
+.macro fpsimd_save state, tmpnr
+	stp	q0, q1, [\state, #16 * 0]
+	stp	q2, q3, [\state, #16 * 2]
+	stp	q4, q5, [\state, #16 * 4]
+	stp	q6, q7, [\state, #16 * 6]
+	stp	q8, q9, [\state, #16 * 8]
+	stp	q10, q11, [\state, #16 * 10]
+	stp	q12, q13, [\state, #16 * 12]
+	stp	q14, q15, [\state, #16 * 14]
+	stp	q16, q17, [\state, #16 * 16]
+	stp	q18, q19, [\state, #16 * 18]
+	stp	q20, q21, [\state, #16 * 20]
+	stp	q22, q23, [\state, #16 * 22]
+	stp	q24, q25, [\state, #16 * 24]
+	stp	q26, q27, [\state, #16 * 26]
+	stp	q28, q29, [\state, #16 * 28]
+	stp	q30, q31, [\state, #16 * 30]!
+	mrs	x\tmpnr, fpsr
+	str	w\tmpnr, [\state, #16 * 2]
+	mrs	x\tmpnr, fpcr
+	str	w\tmpnr, [\state, #16 * 2 + 4]
+.endm
+
+.macro fpsimd_restore_fpcr state, tmp
+	/*
+	 * Writes to fpcr may be self-synchronising, so avoid restoring
+	 * the register if it hasn't changed.
+	 */
+	mrs	\tmp, fpcr
+	cmp	\tmp, \state
+	b.eq	9999f
+	msr	fpcr, \state
+9999:
+.endm
+
+/* Clobbers \state */
+.macro fpsimd_restore state, tmpnr
+	ldp	q0, q1, [\state, #16 * 0]
+	ldp	q2, q3, [\state, #16 * 2]
+	ldp	q4, q5, [\state, #16 * 4]
+	ldp	q6, q7, [\state, #16 * 6]
+	ldp	q8, q9, [\state, #16 * 8]
+	ldp	q10, q11, [\state, #16 * 10]
+	ldp	q12, q13, [\state, #16 * 12]
+	ldp	q14, q15, [\state, #16 * 14]
+	ldp	q16, q17, [\state, #16 * 16]
+	ldp	q18, q19, [\state, #16 * 18]
+	ldp	q20, q21, [\state, #16 * 20]
+	ldp	q22, q23, [\state, #16 * 22]
+	ldp	q24, q25, [\state, #16 * 24]
+	ldp	q26, q27, [\state, #16 * 26]
+	ldp	q28, q29, [\state, #16 * 28]
+	ldp	q30, q31, [\state, #16 * 30]!
+	ldr	w\tmpnr, [\state, #16 * 2]
+	msr	fpsr, x\tmpnr
+	ldr	w\tmpnr, [\state, #16 * 2 + 4]
+	fpsimd_restore_fpcr x\tmpnr, \state
+.endm
+
+/* Sanity-check macros to help avoid encoding garbage instructions */
+
+.macro _check_general_reg nr
+	.if (\nr) < 0 || (\nr) > 30
+		.error "Bad register number \nr."
+	.endif
+.endm
+
+.macro _sve_check_zreg znr
+	.if (\znr) < 0 || (\znr) > 31
+		.error "Bad Scalable Vector Extension vector register number \znr."
+	.endif
+.endm
+
+.macro _sve_check_preg pnr
+	.if (\pnr) < 0 || (\pnr) > 15
+		.error "Bad Scalable Vector Extension predicate register number \pnr."
+	.endif
+.endm
+
+.macro _check_num n, min, max
+	.if (\n) < (\min) || (\n) > (\max)
+		.error "Number \n out of range [\min,\max]"
+	.endif
+.endm
+
+.macro _sme_check_wv v
+	.if (\v) < 12 || (\v) > 15
+		.error "Bad vector select register \v."
+	.endif
+.endm
+
+/* SVE instruction encodings for non-SVE-capable assemblers */
+/* (pre binutils 2.28, all kernel capable clang versions support SVE) */
+
+/* STR (vector): STR Z\nz, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_str_v nz, nxbase, offset=0
+	_sve_check_zreg \nz
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0xe5804000			\
+		| (\nz)				\
+		| ((\nxbase) << 5)		\
+		| (((\offset) & 7) << 10)	\
+		| (((\offset) & 0x1f8) << 13)
+.endm
+
+/* LDR (vector): LDR Z\nz, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_ldr_v nz, nxbase, offset=0
+	_sve_check_zreg \nz
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0x85804000			\
+		| (\nz)				\
+		| ((\nxbase) << 5)		\
+		| (((\offset) & 7) << 10)	\
+		| (((\offset) & 0x1f8) << 13)
+.endm
+
+/* STR (predicate): STR P\np, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_str_p np, nxbase, offset=0
+	_sve_check_preg \np
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0xe5800000			\
+		| (\np)				\
+		| ((\nxbase) << 5)		\
+		| (((\offset) & 7) << 10)	\
+		| (((\offset) & 0x1f8) << 13)
+.endm
+
+/* LDR (predicate): LDR P\np, [X\nxbase, #\offset, MUL VL] */
+.macro _sve_ldr_p np, nxbase, offset=0
+	_sve_check_preg \np
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0x85800000			\
+		| (\np)				\
+		| ((\nxbase) << 5)		\
+		| (((\offset) & 7) << 10)	\
+		| (((\offset) & 0x1f8) << 13)
+.endm
+
+/* RDVL X\nx, #\imm */
+.macro _sve_rdvl nx, imm
+	_check_general_reg \nx
+	_check_num (\imm), -0x20, 0x1f
+	.inst	0x04bf5000			\
+		| (\nx)				\
+		| (((\imm) & 0x3f) << 5)
+.endm
+
+/* RDFFR (unpredicated): RDFFR P\np.B */
+.macro _sve_rdffr np
+	_sve_check_preg \np
+	.inst	0x2519f000			\
+		| (\np)
+.endm
+
+/* WRFFR P\np.B */
+.macro _sve_wrffr np
+	_sve_check_preg \np
+	.inst	0x25289000			\
+		| ((\np) << 5)
+.endm
+
+/* PFALSE P\np.B */
+.macro _sve_pfalse np
+	_sve_check_preg \np
+	.inst	0x2518e400			\
+		| (\np)
+.endm
+
+/* SME instruction encodings for non-SME-capable assemblers */
+/* (pre binutils 2.38/LLVM 13) */
+
+/* RDSVL X\nx, #\imm */
+.macro _sme_rdsvl nx, imm
+	_check_general_reg \nx
+	_check_num (\imm), -0x20, 0x1f
+	.inst	0x04bf5800			\
+		| (\nx)				\
+		| (((\imm) & 0x3f) << 5)
+.endm
+
+/*
+ * STR (vector from ZA array):
+ *	STR ZA[\nw, #\offset], [X\nxbase, #\offset, MUL VL]
+ */
+.macro _sme_str_zav nw, nxbase, offset=0
+	_sme_check_wv \nw
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0xe1200000			\
+		| (((\nw) & 3) << 13)		\
+		| ((\nxbase) << 5)		\
+		| ((\offset) & 7)
+.endm
+
+/*
+ * LDR (vector to ZA array):
+ *	LDR ZA[\nw, #\offset], [X\nxbase, #\offset, MUL VL]
+ */
+.macro _sme_ldr_zav nw, nxbase, offset=0
+	_sme_check_wv \nw
+	_check_general_reg \nxbase
+	_check_num (\offset), -0x100, 0xff
+	.inst	0xe1000000			\
+		| (((\nw) & 3) << 13)		\
+		| ((\nxbase) << 5)		\
+		| ((\offset) & 7)
+.endm
+
+/*
+ * LDR (ZT0)
+ *
+ *	LDR ZT0, nx
+ */
+.macro _ldr_zt nx
+	_check_general_reg \nx
+	.inst	0xe11f8000	\
+		 | (\nx << 5)
+.endm
+
+/*
+ * STR (ZT0)
+ *
+ *	STR ZT0, nx
+ */
+.macro _str_zt nx
+	_check_general_reg \nx
+	.inst	0xe13f8000		\
+		| (\nx << 5)
+.endm
+
+/*
+ * Zero the entire ZA array
+ *	ZERO ZA
+ */
+.macro zero_za
+	.inst 0xc00800ff
+.endm
+
+.macro __for from:req, to:req
+	.if (\from) == (\to)
+		_for__body %\from
+	.else
+		__for %\from, %((\from) + ((\to) - (\from)) / 2)
+		__for %((\from) + ((\to) - (\from)) / 2 + 1), %\to
+	.endif
+.endm
+
+.macro _for var:req, from:req, to:req, insn:vararg
+	.macro _for__body \var:req
+		.noaltmacro
+		\insn
+		.altmacro
+	.endm
+
+	.altmacro
+	__for \from, \to
+	.noaltmacro
+
+	.purgem _for__body
+.endm
+
+/* Update ZCR_EL1.LEN with the new VQ */
+.macro sve_load_vq xvqminus1, xtmp, xtmp2
+		mrs_s		\xtmp, SYS_ZCR_EL1
+		bic		\xtmp2, \xtmp, ZCR_ELx_LEN_MASK
+		orr		\xtmp2, \xtmp2, \xvqminus1
+		cmp		\xtmp2, \xtmp
+		b.eq		921f
+		msr_s		SYS_ZCR_EL1, \xtmp2	//self-synchronising
+921:
+.endm
+
+/* Update SMCR_EL1.LEN with the new VQ */
+.macro sme_load_vq xvqminus1, xtmp, xtmp2
+		mrs_s		\xtmp, SYS_SMCR_EL1
+		bic		\xtmp2, \xtmp, SMCR_ELx_LEN_MASK
+		orr		\xtmp2, \xtmp2, \xvqminus1
+		cmp		\xtmp2, \xtmp
+		b.eq		921f
+		msr_s		SYS_SMCR_EL1, \xtmp2	//self-synchronising
+921:
+.endm
+
+/* Preserve the first 128-bits of Znz and zero the rest. */
+.macro _sve_flush_z nz
+	_sve_check_zreg \nz
+	mov	v\nz\().16b, v\nz\().16b
+.endm
+
+.macro sve_flush_z
+ _for n, 0, 31, _sve_flush_z	\n
+.endm
+.macro sve_flush_p
+ _for n, 0, 15, _sve_pfalse	\n
+.endm
+.macro sve_flush_ffr
+		_sve_wrffr	0
+.endm
+
+.macro sve_save nxbase, xpfpsr, save_ffr, nxtmp
+ _for n, 0, 31,	_sve_str_v	\n, \nxbase, \n - 34
+ _for n, 0, 15,	_sve_str_p	\n, \nxbase, \n - 16
+		cbz		\save_ffr, 921f
+		_sve_rdffr	0
+		b		922f
+921:
+		_sve_pfalse	0			// Zero out FFR
+922:
+		_sve_str_p	0, \nxbase
+		_sve_ldr_p	0, \nxbase, -16
+		mrs		x\nxtmp, fpsr
+		str		w\nxtmp, [\xpfpsr]
+		mrs		x\nxtmp, fpcr
+		str		w\nxtmp, [\xpfpsr, #4]
+.endm
+
+.macro sve_load nxbase, xpfpsr, restore_ffr, nxtmp
+ _for n, 0, 31,	_sve_ldr_v	\n, \nxbase, \n - 34
+		cbz		\restore_ffr, 921f
+		_sve_ldr_p	0, \nxbase
+		_sve_wrffr	0
+921:
+ _for n, 0, 15,	_sve_ldr_p	\n, \nxbase, \n - 16
+
+		ldr		w\nxtmp, [\xpfpsr]
+		msr		fpsr, x\nxtmp
+		ldr		w\nxtmp, [\xpfpsr, #4]
+		msr		fpcr, x\nxtmp
+.endm
+
+.macro sme_save_za nxbase, xvl, nw
+	mov	w\nw, #0
+
+423:
+	_sme_str_zav \nw, \nxbase
+	add	x\nxbase, x\nxbase, \xvl
+	add	x\nw, x\nw, #1
+	cmp	\xvl, x\nw
+	bne	423b
+.endm
+
+.macro sme_load_za nxbase, xvl, nw
+	mov	w\nw, #0
+
+423:
+	_sme_ldr_zav \nw, \nxbase
+	add	x\nxbase, x\nxbase, \xvl
+	add	x\nw, x\nw, #1
+	cmp	\xvl, x\nw
+	bne	423b
+.endm
diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h
new file mode 100644
index 000000000..ab1581964
--- /dev/null
+++ b/arch/arm64/include/asm/ftrace.h
@@ -0,0 +1,221 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/ftrace.h
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+#ifndef __ASM_FTRACE_H
+#define __ASM_FTRACE_H
+
+#include <asm/insn.h>
+
+#define HAVE_FUNCTION_GRAPH_FP_TEST
+
+/*
+ * HAVE_FUNCTION_GRAPH_RET_ADDR_PTR means that the architecture can provide a
+ * "return address pointer" which can be used to uniquely identify a return
+ * address which has been overwritten.
+ *
+ * On arm64 we use the address of the caller's frame record, which remains the
+ * same for the lifetime of the instrumented function, unlike the return
+ * address in the LR.
+ */
+#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+#define ARCH_SUPPORTS_FTRACE_OPS 1
+#else
+#define MCOUNT_ADDR		((unsigned long)_mcount)
+#endif
+
+/* The BL at the callsite's adjusted rec->ip */
+#define MCOUNT_INSN_SIZE	AARCH64_INSN_SIZE
+
+#define FTRACE_PLT_IDX		0
+#define NR_FTRACE_PLTS		1
+
+/*
+ * Currently, gcc tends to save the link register after the local variables
+ * on the stack. This causes the max stack tracer to report the function
+ * frame sizes for the wrong functions. By defining
+ * ARCH_FTRACE_SHIFT_STACK_TRACER, it will tell the stack tracer to expect
+ * to find the return address on the stack after the local variables have
+ * been set up.
+ *
+ * Note, this may change in the future, and we will need to deal with that
+ * if it were to happen.
+ */
+#define ARCH_FTRACE_SHIFT_STACK_TRACER 1
+
+#ifndef __ASSEMBLY__
+#include <linux/compat.h>
+
+extern void _mcount(unsigned long);
+extern void *return_address(unsigned int);
+
+struct dyn_arch_ftrace {
+	/* No extra data needed for arm64 */
+};
+
+extern unsigned long ftrace_graph_call;
+
+extern void return_to_handler(void);
+
+unsigned long ftrace_call_adjust(unsigned long addr);
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+struct dyn_ftrace;
+struct ftrace_ops;
+
+#define arch_ftrace_get_regs(regs) NULL
+
+/*
+ * Note: sizeof(struct ftrace_regs) must be a multiple of 16 to ensure correct
+ * stack alignment
+ */
+struct ftrace_regs {
+	/* x0 - x8 */
+	unsigned long regs[9];
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	unsigned long direct_tramp;
+#else
+	unsigned long __unused;
+#endif
+
+	unsigned long fp;
+	unsigned long lr;
+
+	unsigned long sp;
+	unsigned long pc;
+};
+
+static __always_inline unsigned long
+ftrace_regs_get_instruction_pointer(const struct ftrace_regs *fregs)
+{
+	return fregs->pc;
+}
+
+static __always_inline void
+ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
+				    unsigned long pc)
+{
+	fregs->pc = pc;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_stack_pointer(const struct ftrace_regs *fregs)
+{
+	return fregs->sp;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_argument(struct ftrace_regs *fregs, unsigned int n)
+{
+	if (n < 8)
+		return fregs->regs[n];
+	return 0;
+}
+
+static __always_inline unsigned long
+ftrace_regs_get_return_value(const struct ftrace_regs *fregs)
+{
+	return fregs->regs[0];
+}
+
+static __always_inline void
+ftrace_regs_set_return_value(struct ftrace_regs *fregs,
+			     unsigned long ret)
+{
+	fregs->regs[0] = ret;
+}
+
+static __always_inline void
+ftrace_override_function_with_return(struct ftrace_regs *fregs)
+{
+	fregs->pc = fregs->lr;
+}
+
+int ftrace_regs_query_register_offset(const char *name);
+
+int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
+#define ftrace_init_nop ftrace_init_nop
+
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+		       struct ftrace_ops *op, struct ftrace_regs *fregs);
+#define ftrace_graph_func ftrace_graph_func
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs,
+						 unsigned long addr)
+{
+	/*
+	 * The ftrace trampoline will return to this address instead of the
+	 * instrumented function.
+	 */
+	fregs->direct_tramp = addr;
+}
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+
+#endif
+
+#define ftrace_return_address(n) return_address(n)
+
+/*
+ * Because AArch32 mode does not share the same syscall table with AArch64,
+ * tracing compat syscalls may result in reporting bogus syscalls or even
+ * hang-up, so just do not trace them.
+ * See kernel/trace/trace_syscalls.c
+ *
+ * x86 code says:
+ * If the user really wants these, then they should use the
+ * raw syscall tracepoints with filtering.
+ */
+#define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS
+static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
+{
+	return is_compat_task();
+}
+
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	/*
+	 * Since all syscall functions have __arm64_ prefix, we must skip it.
+	 * However, as we described above, we decided to ignore compat
+	 * syscalls, so we don't care about __arm64_compat_ prefix here.
+	 */
+	return !strcmp(sym + 8, name);
+}
+#endif /* ifndef __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+struct fgraph_ret_regs {
+	/* x0 - x7 */
+	unsigned long regs[8];
+
+	unsigned long fp;
+	unsigned long __unused;
+};
+
+static inline unsigned long fgraph_ret_regs_return_value(struct fgraph_ret_regs *ret_regs)
+{
+	return ret_regs->regs[0];
+}
+
+static inline unsigned long fgraph_ret_regs_frame_pointer(struct fgraph_ret_regs *ret_regs)
+{
+	return ret_regs->fp;
+}
+
+void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
+			   unsigned long frame_pointer);
+
+#endif /* ifdef CONFIG_FUNCTION_GRAPH_TRACER  */
+#endif
+
+#endif /* __ASM_FTRACE_H */
diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
new file mode 100644
index 000000000..bc06691d2
--- /dev/null
+++ b/arch/arm64/include/asm/futex.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_FUTEX_H
+#define __ASM_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+
+#include <asm/errno.h>
+
+#define FUTEX_MAX_LOOPS	128 /* What's the largest number you can think of? */
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg)		\
+do {									\
+	unsigned int loops = FUTEX_MAX_LOOPS;				\
+									\
+	uaccess_enable_privileged();					\
+	asm volatile(							\
+"	prfm	pstl1strm, %2\n"					\
+"1:	ldxr	%w1, %2\n"						\
+	insn "\n"							\
+"2:	stlxr	%w0, %w3, %2\n"						\
+"	cbz	%w0, 3f\n"						\
+"	sub	%w4, %w4, %w0\n"					\
+"	cbnz	%w4, 1b\n"						\
+"	mov	%w0, %w6\n"						\
+"3:\n"									\
+"	dmb	ish\n"							\
+	_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %w0)				\
+	_ASM_EXTABLE_UACCESS_ERR(2b, 3b, %w0)				\
+	: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp),	\
+	  "+r" (loops)							\
+	: "r" (oparg), "Ir" (-EAGAIN)					\
+	: "memory");							\
+	uaccess_disable_privileged();					\
+} while (0)
+
+static inline int
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *_uaddr)
+{
+	int oldval = 0, ret, tmp;
+	u32 __user *uaddr = __uaccess_mask_ptr(_uaddr);
+
+	if (!access_ok(_uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov	%w3, %w5",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add	%w3, %w1, %w5",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("orr	%w3, %w1, %w5",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("and	%w3, %w1, %w5",
+				  ret, oldval, uaddr, tmp, ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("eor	%w3, %w1, %w5",
+				  ret, oldval, uaddr, tmp, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	if (!ret)
+		*oval = oldval;
+
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *_uaddr,
+			      u32 oldval, u32 newval)
+{
+	int ret = 0;
+	unsigned int loops = FUTEX_MAX_LOOPS;
+	u32 val, tmp;
+	u32 __user *uaddr;
+
+	if (!access_ok(_uaddr, sizeof(u32)))
+		return -EFAULT;
+
+	uaddr = __uaccess_mask_ptr(_uaddr);
+	uaccess_enable_privileged();
+	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+"	prfm	pstl1strm, %2\n"
+"1:	ldxr	%w1, %2\n"
+"	sub	%w3, %w1, %w5\n"
+"	cbnz	%w3, 4f\n"
+"2:	stlxr	%w3, %w6, %2\n"
+"	cbz	%w3, 3f\n"
+"	sub	%w4, %w4, %w3\n"
+"	cbnz	%w4, 1b\n"
+"	mov	%w0, %w7\n"
+"3:\n"
+"	dmb	ish\n"
+"4:\n"
+	_ASM_EXTABLE_UACCESS_ERR(1b, 4b, %w0)
+	_ASM_EXTABLE_UACCESS_ERR(2b, 4b, %w0)
+	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp), "+r" (loops)
+	: "r" (oldval), "r" (newval), "Ir" (-EAGAIN)
+	: "memory");
+	uaccess_disable_privileged();
+
+	if (!ret)
+		*uval = val;
+
+	return ret;
+}
+
+#endif /* __ASM_FUTEX_H */
diff --git a/arch/arm64/include/asm/gpr-num.h b/arch/arm64/include/asm/gpr-num.h
new file mode 100644
index 000000000..05da4a7c5
--- /dev/null
+++ b/arch/arm64/include/asm/gpr-num.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_GPR_NUM_H
+#define __ASM_GPR_NUM_H
+
+#ifdef __ASSEMBLY__
+
+	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30
+	.equ	.L__gpr_num_x\num, \num
+	.equ	.L__gpr_num_w\num, \num
+	.endr
+	.equ	.L__gpr_num_xzr, 31
+	.equ	.L__gpr_num_wzr, 31
+
+#else /* __ASSEMBLY__ */
+
+#define __DEFINE_ASM_GPR_NUMS					\
+"	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\n" \
+"	.equ	.L__gpr_num_x\\num, \\num\n"			\
+"	.equ	.L__gpr_num_w\\num, \\num\n"			\
+"	.endr\n"						\
+"	.equ	.L__gpr_num_xzr, 31\n"				\
+"	.equ	.L__gpr_num_wzr, 31\n"
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_GPR_NUM_H */
diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
new file mode 100644
index 000000000..cbfa7b6f2
--- /dev/null
+++ b/arch/arm64/include/asm/hardirq.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/percpu.h>
+#include <linux/threads.h>
+#include <asm/barrier.h>
+#include <asm/irq.h>
+#include <asm/kvm_arm.h>
+#include <asm/sysreg.h>
+
+#define ack_bad_irq ack_bad_irq
+#include <asm-generic/hardirq.h>
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+struct nmi_ctx {
+	u64 hcr;
+	unsigned int cnt;
+};
+
+DECLARE_PER_CPU(struct nmi_ctx, nmi_contexts);
+
+#define arch_nmi_enter()						\
+do {									\
+	struct nmi_ctx *___ctx;						\
+	u64 ___hcr;							\
+									\
+	if (!is_kernel_in_hyp_mode())					\
+		break;							\
+									\
+	___ctx = this_cpu_ptr(&nmi_contexts);				\
+	if (___ctx->cnt) {						\
+		___ctx->cnt++;						\
+		break;							\
+	}								\
+									\
+	___hcr = read_sysreg(hcr_el2);					\
+	if (!(___hcr & HCR_TGE)) {					\
+		write_sysreg(___hcr | HCR_TGE, hcr_el2);		\
+		isb();							\
+	}								\
+	/*								\
+	 * Make sure the sysreg write is performed before ___ctx->cnt	\
+	 * is set to 1. NMIs that see cnt == 1 will rely on us.		\
+	 */								\
+	barrier();							\
+	___ctx->cnt = 1;                                                \
+	/*								\
+	 * Make sure ___ctx->cnt is set before we save ___hcr. We	\
+	 * don't want ___ctx->hcr to be overwritten.			\
+	 */								\
+	barrier();							\
+	___ctx->hcr = ___hcr;						\
+} while (0)
+
+#define arch_nmi_exit()							\
+do {									\
+	struct nmi_ctx *___ctx;						\
+	u64 ___hcr;							\
+									\
+	if (!is_kernel_in_hyp_mode())					\
+		break;							\
+									\
+	___ctx = this_cpu_ptr(&nmi_contexts);				\
+	___hcr = ___ctx->hcr;						\
+	/*								\
+	 * Make sure we read ___ctx->hcr before we release		\
+	 * ___ctx->cnt as it makes ___ctx->hcr updatable again.		\
+	 */								\
+	barrier();							\
+	___ctx->cnt--;							\
+	/*								\
+	 * Make sure ___ctx->cnt release is visible before we		\
+	 * restore the sysreg. Otherwise a new NMI occurring		\
+	 * right after write_sysreg() can be fooled and think		\
+	 * we secured things for it.					\
+	 */								\
+	barrier();							\
+	if (!___ctx->cnt && !(___hcr & HCR_TGE))			\
+		write_sysreg(___hcr, hcr_el2);				\
+} while (0)
+
+static inline void ack_bad_irq(unsigned int irq)
+{
+	extern unsigned long irq_err_count;
+	irq_err_count++;
+}
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h
new file mode 100644
index 000000000..2ddc33d93
--- /dev/null
+++ b/arch/arm64/include/asm/hugetlb.h
@@ -0,0 +1,79 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/hugetlb.h
+ *
+ * Copyright (C) 2013 Linaro Ltd.
+ *
+ * Based on arch/x86/include/asm/hugetlb.h
+ */
+
+#ifndef __ASM_HUGETLB_H
+#define __ASM_HUGETLB_H
+
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
+#define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
+extern bool arch_hugetlb_migration_supported(struct hstate *h);
+#endif
+
+static inline void arch_clear_hugepage_flags(struct page *page)
+{
+	clear_bit(PG_dcache_clean, &page->flags);
+}
+#define arch_clear_hugepage_flags arch_clear_hugepage_flags
+
+pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags);
+#define arch_make_huge_pte arch_make_huge_pte
+#define __HAVE_ARCH_HUGE_SET_HUGE_PTE_AT
+extern void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, pte_t pte, unsigned long sz);
+#define __HAVE_ARCH_HUGE_PTEP_SET_ACCESS_FLAGS
+extern int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+				      unsigned long addr, pte_t *ptep,
+				      pte_t pte, int dirty);
+#define __HAVE_ARCH_HUGE_PTEP_GET_AND_CLEAR
+extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+				     unsigned long addr, pte_t *ptep);
+#define __HAVE_ARCH_HUGE_PTEP_SET_WRPROTECT
+extern void huge_ptep_set_wrprotect(struct mm_struct *mm,
+				    unsigned long addr, pte_t *ptep);
+#define __HAVE_ARCH_HUGE_PTEP_CLEAR_FLUSH
+extern pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
+				   unsigned long addr, pte_t *ptep);
+#define __HAVE_ARCH_HUGE_PTE_CLEAR
+extern void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, unsigned long sz);
+#define __HAVE_ARCH_HUGE_PTEP_GET
+extern pte_t huge_ptep_get(pte_t *ptep);
+
+void __init arm64_hugetlb_cma_reserve(void);
+
+#define huge_ptep_modify_prot_start huge_ptep_modify_prot_start
+extern pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep);
+
+#define huge_ptep_modify_prot_commit huge_ptep_modify_prot_commit
+extern void huge_ptep_modify_prot_commit(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep,
+					 pte_t old_pte, pte_t new_pte);
+
+#include <asm-generic/hugetlb.h>
+
+#define __HAVE_ARCH_FLUSH_HUGETLB_TLB_RANGE
+static inline void flush_hugetlb_tlb_range(struct vm_area_struct *vma,
+					   unsigned long start,
+					   unsigned long end)
+{
+	unsigned long stride = huge_page_size(hstate_vma(vma));
+
+	if (stride == PMD_SIZE)
+		__flush_tlb_range(vma, start, end, stride, false, 2);
+	else if (stride == PUD_SIZE)
+		__flush_tlb_range(vma, start, end, stride, false, 1);
+	else
+		__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
+}
+
+#endif /* __ASM_HUGETLB_H */
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
new file mode 100644
index 000000000..84055329c
--- /dev/null
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_HW_BREAKPOINT_H
+#define __ASM_HW_BREAKPOINT_H
+
+#include <asm/cputype.h>
+#include <asm/cpufeature.h>
+#include <asm/sysreg.h>
+#include <asm/virt.h>
+
+struct arch_hw_breakpoint_ctrl {
+	u32 __reserved	: 19,
+	len		: 8,
+	type		: 2,
+	privilege	: 2,
+	enabled		: 1;
+};
+
+struct arch_hw_breakpoint {
+	u64 address;
+	u64 trigger;
+	struct arch_hw_breakpoint_ctrl ctrl;
+};
+
+/* Privilege Levels */
+#define AARCH64_BREAKPOINT_EL1	1
+#define AARCH64_BREAKPOINT_EL0	2
+
+#define DBG_HMC_HYP		(1 << 13)
+
+static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
+{
+	u32 val = (ctrl.len << 5) | (ctrl.type << 3) | (ctrl.privilege << 1) |
+		ctrl.enabled;
+
+	if (is_kernel_in_hyp_mode() && ctrl.privilege == AARCH64_BREAKPOINT_EL1)
+		val |= DBG_HMC_HYP;
+
+	return val;
+}
+
+static inline void decode_ctrl_reg(u32 reg,
+				   struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	ctrl->enabled	= reg & 0x1;
+	reg >>= 1;
+	ctrl->privilege	= reg & 0x3;
+	reg >>= 2;
+	ctrl->type	= reg & 0x3;
+	reg >>= 2;
+	ctrl->len	= reg & 0xff;
+}
+
+/* Breakpoint */
+#define ARM_BREAKPOINT_EXECUTE	0
+
+/* Watchpoints */
+#define ARM_BREAKPOINT_LOAD	1
+#define ARM_BREAKPOINT_STORE	2
+#define AARCH64_ESR_ACCESS_MASK	(1 << 6)
+
+/* Lengths */
+#define ARM_BREAKPOINT_LEN_1	0x1
+#define ARM_BREAKPOINT_LEN_2	0x3
+#define ARM_BREAKPOINT_LEN_3	0x7
+#define ARM_BREAKPOINT_LEN_4	0xf
+#define ARM_BREAKPOINT_LEN_5	0x1f
+#define ARM_BREAKPOINT_LEN_6	0x3f
+#define ARM_BREAKPOINT_LEN_7	0x7f
+#define ARM_BREAKPOINT_LEN_8	0xff
+
+/* Kernel stepping */
+#define ARM_KERNEL_STEP_NONE	0
+#define ARM_KERNEL_STEP_ACTIVE	1
+#define ARM_KERNEL_STEP_SUSPEND	2
+
+/*
+ * Limits.
+ * Changing these will require modifications to the register accessors.
+ */
+#define ARM_MAX_BRP		16
+#define ARM_MAX_WRP		16
+
+/* Virtual debug register bases. */
+#define AARCH64_DBG_REG_BVR	0
+#define AARCH64_DBG_REG_BCR	(AARCH64_DBG_REG_BVR + ARM_MAX_BRP)
+#define AARCH64_DBG_REG_WVR	(AARCH64_DBG_REG_BCR + ARM_MAX_BRP)
+#define AARCH64_DBG_REG_WCR	(AARCH64_DBG_REG_WVR + ARM_MAX_WRP)
+
+/* Debug register names. */
+#define AARCH64_DBG_REG_NAME_BVR	bvr
+#define AARCH64_DBG_REG_NAME_BCR	bcr
+#define AARCH64_DBG_REG_NAME_WVR	wvr
+#define AARCH64_DBG_REG_NAME_WCR	wcr
+
+/* Accessor macros for the debug registers. */
+#define AARCH64_DBG_READ(N, REG, VAL) do {\
+	VAL = read_sysreg(dbg##REG##N##_el1);\
+} while (0)
+
+#define AARCH64_DBG_WRITE(N, REG, VAL) do {\
+	write_sysreg(VAL, dbg##REG##N##_el1);\
+} while (0)
+
+struct task_struct;
+struct notifier_block;
+struct perf_event_attr;
+struct perf_event;
+struct pmu;
+
+extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+				  int *gen_len, int *gen_type, int *offset);
+extern int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw);
+extern int hw_breakpoint_arch_parse(struct perf_event *bp,
+				    const struct perf_event_attr *attr,
+				    struct arch_hw_breakpoint *hw);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+extern int arch_install_hw_breakpoint(struct perf_event *bp);
+extern void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+extern void hw_breakpoint_pmu_read(struct perf_event *bp);
+extern int hw_breakpoint_slots(int type);
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+extern void hw_breakpoint_thread_switch(struct task_struct *next);
+extern void ptrace_hw_copy_thread(struct task_struct *task);
+#else
+static inline void hw_breakpoint_thread_switch(struct task_struct *next)
+{
+}
+static inline void ptrace_hw_copy_thread(struct task_struct *task)
+{
+}
+#endif
+
+/* Determine number of BRP registers available. */
+static inline int get_num_brps(void)
+{
+	u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	return 1 +
+		cpuid_feature_extract_unsigned_field(dfr0,
+						ID_AA64DFR0_EL1_BRPs_SHIFT);
+}
+
+/* Determine number of WRP registers available. */
+static inline int get_num_wrps(void)
+{
+	u64 dfr0 = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	return 1 +
+		cpuid_feature_extract_unsigned_field(dfr0,
+						ID_AA64DFR0_EL1_WRPs_SHIFT);
+}
+
+#ifdef CONFIG_CPU_PM
+extern void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int));
+#else
+static inline void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int))
+{
+}
+#endif
+
+#endif	/* __ASM_BREAKPOINT_H */
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
new file mode 100644
index 000000000..521267478
--- /dev/null
+++ b/arch/arm64/include/asm/hwcap.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_HWCAP_H
+#define __ASM_HWCAP_H
+
+#include <uapi/asm/hwcap.h>
+#include <asm/cpufeature.h>
+
+#define COMPAT_HWCAP_SWP	(1 << 0)
+#define COMPAT_HWCAP_HALF	(1 << 1)
+#define COMPAT_HWCAP_THUMB	(1 << 2)
+#define COMPAT_HWCAP_26BIT	(1 << 3)
+#define COMPAT_HWCAP_FAST_MULT	(1 << 4)
+#define COMPAT_HWCAP_FPA	(1 << 5)
+#define COMPAT_HWCAP_VFP	(1 << 6)
+#define COMPAT_HWCAP_EDSP	(1 << 7)
+#define COMPAT_HWCAP_JAVA	(1 << 8)
+#define COMPAT_HWCAP_IWMMXT	(1 << 9)
+#define COMPAT_HWCAP_CRUNCH	(1 << 10) /* Obsolete */
+#define COMPAT_HWCAP_THUMBEE	(1 << 11)
+#define COMPAT_HWCAP_NEON	(1 << 12)
+#define COMPAT_HWCAP_VFPv3	(1 << 13)
+#define COMPAT_HWCAP_VFPV3D16	(1 << 14)
+#define COMPAT_HWCAP_TLS	(1 << 15)
+#define COMPAT_HWCAP_VFPv4	(1 << 16)
+#define COMPAT_HWCAP_IDIVA	(1 << 17)
+#define COMPAT_HWCAP_IDIVT	(1 << 18)
+#define COMPAT_HWCAP_IDIV	(COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
+#define COMPAT_HWCAP_VFPD32	(1 << 19)
+#define COMPAT_HWCAP_LPAE	(1 << 20)
+#define COMPAT_HWCAP_EVTSTRM	(1 << 21)
+#define COMPAT_HWCAP_FPHP	(1 << 22)
+#define COMPAT_HWCAP_ASIMDHP	(1 << 23)
+#define COMPAT_HWCAP_ASIMDDP	(1 << 24)
+#define COMPAT_HWCAP_ASIMDFHM	(1 << 25)
+#define COMPAT_HWCAP_ASIMDBF16	(1 << 26)
+#define COMPAT_HWCAP_I8MM	(1 << 27)
+
+#define COMPAT_HWCAP2_AES	(1 << 0)
+#define COMPAT_HWCAP2_PMULL	(1 << 1)
+#define COMPAT_HWCAP2_SHA1	(1 << 2)
+#define COMPAT_HWCAP2_SHA2	(1 << 3)
+#define COMPAT_HWCAP2_CRC32	(1 << 4)
+#define COMPAT_HWCAP2_SB	(1 << 5)
+#define COMPAT_HWCAP2_SSBS	(1 << 6)
+
+#ifndef __ASSEMBLY__
+#include <linux/log2.h>
+
+/*
+ * For userspace we represent hwcaps as a collection of HWCAP{,2}_x bitfields
+ * as described in uapi/asm/hwcap.h. For the kernel we represent hwcaps as
+ * natural numbers (in a single range of size MAX_CPU_FEATURES) defined here
+ * with prefix KERNEL_HWCAP_ mapped to their HWCAP{,2}_x counterpart.
+ *
+ * Hwcaps should be set and tested within the kernel via the
+ * cpu_{set,have}_named_feature(feature) where feature is the unique suffix
+ * of KERNEL_HWCAP_{feature}.
+ */
+#define __khwcap_feature(x)		const_ilog2(HWCAP_ ## x)
+#define KERNEL_HWCAP_FP			__khwcap_feature(FP)
+#define KERNEL_HWCAP_ASIMD		__khwcap_feature(ASIMD)
+#define KERNEL_HWCAP_EVTSTRM		__khwcap_feature(EVTSTRM)
+#define KERNEL_HWCAP_AES		__khwcap_feature(AES)
+#define KERNEL_HWCAP_PMULL		__khwcap_feature(PMULL)
+#define KERNEL_HWCAP_SHA1		__khwcap_feature(SHA1)
+#define KERNEL_HWCAP_SHA2		__khwcap_feature(SHA2)
+#define KERNEL_HWCAP_CRC32		__khwcap_feature(CRC32)
+#define KERNEL_HWCAP_ATOMICS		__khwcap_feature(ATOMICS)
+#define KERNEL_HWCAP_FPHP		__khwcap_feature(FPHP)
+#define KERNEL_HWCAP_ASIMDHP		__khwcap_feature(ASIMDHP)
+#define KERNEL_HWCAP_CPUID		__khwcap_feature(CPUID)
+#define KERNEL_HWCAP_ASIMDRDM		__khwcap_feature(ASIMDRDM)
+#define KERNEL_HWCAP_JSCVT		__khwcap_feature(JSCVT)
+#define KERNEL_HWCAP_FCMA		__khwcap_feature(FCMA)
+#define KERNEL_HWCAP_LRCPC		__khwcap_feature(LRCPC)
+#define KERNEL_HWCAP_DCPOP		__khwcap_feature(DCPOP)
+#define KERNEL_HWCAP_SHA3		__khwcap_feature(SHA3)
+#define KERNEL_HWCAP_SM3		__khwcap_feature(SM3)
+#define KERNEL_HWCAP_SM4		__khwcap_feature(SM4)
+#define KERNEL_HWCAP_ASIMDDP		__khwcap_feature(ASIMDDP)
+#define KERNEL_HWCAP_SHA512		__khwcap_feature(SHA512)
+#define KERNEL_HWCAP_SVE		__khwcap_feature(SVE)
+#define KERNEL_HWCAP_ASIMDFHM		__khwcap_feature(ASIMDFHM)
+#define KERNEL_HWCAP_DIT		__khwcap_feature(DIT)
+#define KERNEL_HWCAP_USCAT		__khwcap_feature(USCAT)
+#define KERNEL_HWCAP_ILRCPC		__khwcap_feature(ILRCPC)
+#define KERNEL_HWCAP_FLAGM		__khwcap_feature(FLAGM)
+#define KERNEL_HWCAP_SSBS		__khwcap_feature(SSBS)
+#define KERNEL_HWCAP_SB			__khwcap_feature(SB)
+#define KERNEL_HWCAP_PACA		__khwcap_feature(PACA)
+#define KERNEL_HWCAP_PACG		__khwcap_feature(PACG)
+
+#define __khwcap2_feature(x)		(const_ilog2(HWCAP2_ ## x) + 64)
+#define KERNEL_HWCAP_DCPODP		__khwcap2_feature(DCPODP)
+#define KERNEL_HWCAP_SVE2		__khwcap2_feature(SVE2)
+#define KERNEL_HWCAP_SVEAES		__khwcap2_feature(SVEAES)
+#define KERNEL_HWCAP_SVEPMULL		__khwcap2_feature(SVEPMULL)
+#define KERNEL_HWCAP_SVEBITPERM		__khwcap2_feature(SVEBITPERM)
+#define KERNEL_HWCAP_SVESHA3		__khwcap2_feature(SVESHA3)
+#define KERNEL_HWCAP_SVESM4		__khwcap2_feature(SVESM4)
+#define KERNEL_HWCAP_FLAGM2		__khwcap2_feature(FLAGM2)
+#define KERNEL_HWCAP_FRINT		__khwcap2_feature(FRINT)
+#define KERNEL_HWCAP_SVEI8MM		__khwcap2_feature(SVEI8MM)
+#define KERNEL_HWCAP_SVEF32MM		__khwcap2_feature(SVEF32MM)
+#define KERNEL_HWCAP_SVEF64MM		__khwcap2_feature(SVEF64MM)
+#define KERNEL_HWCAP_SVEBF16		__khwcap2_feature(SVEBF16)
+#define KERNEL_HWCAP_I8MM		__khwcap2_feature(I8MM)
+#define KERNEL_HWCAP_BF16		__khwcap2_feature(BF16)
+#define KERNEL_HWCAP_DGH		__khwcap2_feature(DGH)
+#define KERNEL_HWCAP_RNG		__khwcap2_feature(RNG)
+#define KERNEL_HWCAP_BTI		__khwcap2_feature(BTI)
+#define KERNEL_HWCAP_MTE		__khwcap2_feature(MTE)
+#define KERNEL_HWCAP_ECV		__khwcap2_feature(ECV)
+#define KERNEL_HWCAP_AFP		__khwcap2_feature(AFP)
+#define KERNEL_HWCAP_RPRES		__khwcap2_feature(RPRES)
+#define KERNEL_HWCAP_MTE3		__khwcap2_feature(MTE3)
+#define KERNEL_HWCAP_SME		__khwcap2_feature(SME)
+#define KERNEL_HWCAP_SME_I16I64		__khwcap2_feature(SME_I16I64)
+#define KERNEL_HWCAP_SME_F64F64		__khwcap2_feature(SME_F64F64)
+#define KERNEL_HWCAP_SME_I8I32		__khwcap2_feature(SME_I8I32)
+#define KERNEL_HWCAP_SME_F16F32		__khwcap2_feature(SME_F16F32)
+#define KERNEL_HWCAP_SME_B16F32		__khwcap2_feature(SME_B16F32)
+#define KERNEL_HWCAP_SME_F32F32		__khwcap2_feature(SME_F32F32)
+#define KERNEL_HWCAP_SME_FA64		__khwcap2_feature(SME_FA64)
+#define KERNEL_HWCAP_WFXT		__khwcap2_feature(WFXT)
+#define KERNEL_HWCAP_EBF16		__khwcap2_feature(EBF16)
+#define KERNEL_HWCAP_SVE_EBF16		__khwcap2_feature(SVE_EBF16)
+#define KERNEL_HWCAP_CSSC		__khwcap2_feature(CSSC)
+#define KERNEL_HWCAP_RPRFM		__khwcap2_feature(RPRFM)
+#define KERNEL_HWCAP_SVE2P1		__khwcap2_feature(SVE2P1)
+#define KERNEL_HWCAP_SME2		__khwcap2_feature(SME2)
+#define KERNEL_HWCAP_SME2P1		__khwcap2_feature(SME2P1)
+#define KERNEL_HWCAP_SME_I16I32		__khwcap2_feature(SME_I16I32)
+#define KERNEL_HWCAP_SME_BI32I32	__khwcap2_feature(SME_BI32I32)
+#define KERNEL_HWCAP_SME_B16B16		__khwcap2_feature(SME_B16B16)
+#define KERNEL_HWCAP_SME_F16F16		__khwcap2_feature(SME_F16F16)
+#define KERNEL_HWCAP_MOPS		__khwcap2_feature(MOPS)
+#define KERNEL_HWCAP_HBC		__khwcap2_feature(HBC)
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP		cpu_get_elf_hwcap()
+#define ELF_HWCAP2		cpu_get_elf_hwcap2()
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_ELF_HWCAP	(compat_elf_hwcap)
+#define COMPAT_ELF_HWCAP2	(compat_elf_hwcap2)
+extern unsigned int compat_elf_hwcap, compat_elf_hwcap2;
+#endif
+
+enum {
+	CAP_HWCAP = 1,
+#ifdef CONFIG_COMPAT
+	CAP_COMPAT_HWCAP,
+	CAP_COMPAT_HWCAP2,
+#endif
+};
+
+#endif
+#endif
diff --git a/arch/arm64/include/asm/hyp_image.h b/arch/arm64/include/asm/hyp_image.h
new file mode 100644
index 000000000..b4b3076a7
--- /dev/null
+++ b/arch/arm64/include/asm/hyp_image.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Google LLC.
+ * Written by David Brazdil <dbrazdil@google.com>
+ */
+
+#ifndef __ARM64_HYP_IMAGE_H__
+#define __ARM64_HYP_IMAGE_H__
+
+#define __HYP_CONCAT(a, b)	a ## b
+#define HYP_CONCAT(a, b)	__HYP_CONCAT(a, b)
+
+#ifndef __KVM_NVHE_HYPERVISOR__
+/*
+ * KVM nVHE code has its own symbol namespace prefixed with __kvm_nvhe_,
+ * to separate it from the kernel proper.
+ */
+#define kvm_nvhe_sym(sym)	__kvm_nvhe_##sym
+#else
+#define kvm_nvhe_sym(sym)	sym
+#endif
+
+#ifdef LINKER_SCRIPT
+
+/*
+ * KVM nVHE ELF section names are prefixed with .hyp, to separate them
+ * from the kernel proper.
+ */
+#define HYP_SECTION_NAME(NAME)	.hyp##NAME
+
+/* Symbol defined at the beginning of each hyp section. */
+#define HYP_SECTION_SYMBOL_NAME(NAME) \
+	HYP_CONCAT(__hyp_section_, HYP_SECTION_NAME(NAME))
+
+/*
+ * Helper to generate linker script statements starting a hyp section.
+ *
+ * A symbol with a well-known name is defined at the first byte. This
+ * is used as a base for hyp relocations (see gen-hyprel.c). It must
+ * be defined inside the section so the linker of `vmlinux` cannot
+ * separate it from the section data.
+ */
+#define BEGIN_HYP_SECTION(NAME)				\
+	HYP_SECTION_NAME(NAME) : {			\
+		HYP_SECTION_SYMBOL_NAME(NAME) = .;
+
+/* Helper to generate linker script statements ending a hyp section. */
+#define END_HYP_SECTION					\
+	}
+
+/* Defines an ELF hyp section from input section @NAME and its subsections. */
+#define HYP_SECTION(NAME)			\
+	BEGIN_HYP_SECTION(NAME)			\
+		*(NAME NAME##.*)		\
+	END_HYP_SECTION
+
+/*
+ * Defines a linker script alias of a kernel-proper symbol referenced by
+ * KVM nVHE hyp code.
+ */
+#define KVM_NVHE_ALIAS(sym)	kvm_nvhe_sym(sym) = sym;
+
+/* Defines a linker script alias for KVM nVHE hyp symbols */
+#define KVM_NVHE_ALIAS_HYP(first, sec)	kvm_nvhe_sym(first) = kvm_nvhe_sym(sec);
+
+#endif /* LINKER_SCRIPT */
+
+#endif /* __ARM64_HYP_IMAGE_H__ */
diff --git a/arch/arm64/include/asm/hyperv-tlfs.h b/arch/arm64/include/asm/hyperv-tlfs.h
new file mode 100644
index 000000000..bc6c7ac93
--- /dev/null
+++ b/arch/arm64/include/asm/hyperv-tlfs.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This file contains definitions from the Hyper-V Hypervisor Top-Level
+ * Functional Specification (TLFS):
+ * https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
+ *
+ * Copyright (C) 2021, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@microsoft.com>
+ */
+
+#ifndef _ASM_HYPERV_TLFS_H
+#define _ASM_HYPERV_TLFS_H
+
+#include <linux/types.h>
+
+/*
+ * All data structures defined in the TLFS that are shared between Hyper-V
+ * and a guest VM use Little Endian byte ordering.  This matches the default
+ * byte ordering of Linux running on ARM64, so no special handling is required.
+ */
+
+/*
+ * These Hyper-V registers provide information equivalent to the CPUID
+ * instruction on x86/x64.
+ */
+#define HV_REGISTER_HYPERVISOR_VERSION		0x00000100 /*CPUID 0x40000002 */
+#define HV_REGISTER_FEATURES			0x00000200 /*CPUID 0x40000003 */
+#define HV_REGISTER_ENLIGHTENMENTS		0x00000201 /*CPUID 0x40000004 */
+
+/*
+ * Group C Features. See the asm-generic version of hyperv-tlfs.h
+ * for a description of Feature Groups.
+ */
+
+/* Crash MSRs available */
+#define HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE	BIT(8)
+
+/* STIMER direct mode is available */
+#define HV_STIMER_DIRECT_MODE_AVAILABLE		BIT(13)
+
+/*
+ * Synthetic register definitions equivalent to MSRs on x86/x64
+ */
+#define HV_REGISTER_CRASH_P0		0x00000210
+#define HV_REGISTER_CRASH_P1		0x00000211
+#define HV_REGISTER_CRASH_P2		0x00000212
+#define HV_REGISTER_CRASH_P3		0x00000213
+#define HV_REGISTER_CRASH_P4		0x00000214
+#define HV_REGISTER_CRASH_CTL		0x00000215
+
+#define HV_REGISTER_GUEST_OSID		0x00090002
+#define HV_REGISTER_VP_INDEX		0x00090003
+#define HV_REGISTER_TIME_REF_COUNT	0x00090004
+#define HV_REGISTER_REFERENCE_TSC	0x00090017
+
+#define HV_REGISTER_SINT0		0x000A0000
+#define HV_REGISTER_SCONTROL		0x000A0010
+#define HV_REGISTER_SIEFP		0x000A0012
+#define HV_REGISTER_SIMP		0x000A0013
+#define HV_REGISTER_EOM			0x000A0014
+
+#define HV_REGISTER_STIMER0_CONFIG	0x000B0000
+#define HV_REGISTER_STIMER0_COUNT	0x000B0001
+
+union hv_msi_entry {
+	u64 as_uint64[2];
+	struct {
+		u64 address;
+		u32 data;
+		u32 reserved;
+	} __packed;
+};
+
+#include <asm-generic/hyperv-tlfs.h>
+
+#endif
diff --git a/arch/arm64/include/asm/hypervisor.h b/arch/arm64/include/asm/hypervisor.h
new file mode 100644
index 000000000..0ae427f35
--- /dev/null
+++ b/arch/arm64/include/asm/hypervisor.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_HYPERVISOR_H
+#define _ASM_ARM64_HYPERVISOR_H
+
+#include <asm/xen/hypervisor.h>
+
+void kvm_init_hyp_services(void);
+bool kvm_arm_hyp_service_available(u32 func_id);
+
+#endif
diff --git a/arch/arm64/include/asm/image.h b/arch/arm64/include/asm/image.h
new file mode 100644
index 000000000..c09cf942d
--- /dev/null
+++ b/arch/arm64/include/asm/image.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_IMAGE_H
+#define __ASM_IMAGE_H
+
+#define ARM64_IMAGE_MAGIC	"ARM\x64"
+
+#define ARM64_IMAGE_FLAG_BE_SHIFT		0
+#define ARM64_IMAGE_FLAG_PAGE_SIZE_SHIFT	(ARM64_IMAGE_FLAG_BE_SHIFT + 1)
+#define ARM64_IMAGE_FLAG_PHYS_BASE_SHIFT \
+					(ARM64_IMAGE_FLAG_PAGE_SIZE_SHIFT + 2)
+#define ARM64_IMAGE_FLAG_BE_MASK		0x1
+#define ARM64_IMAGE_FLAG_PAGE_SIZE_MASK		0x3
+#define ARM64_IMAGE_FLAG_PHYS_BASE_MASK		0x1
+
+#define ARM64_IMAGE_FLAG_LE			0
+#define ARM64_IMAGE_FLAG_BE			1
+#define ARM64_IMAGE_FLAG_PAGE_SIZE_4K		1
+#define ARM64_IMAGE_FLAG_PAGE_SIZE_16K		2
+#define ARM64_IMAGE_FLAG_PAGE_SIZE_64K		3
+#define ARM64_IMAGE_FLAG_PHYS_BASE		1
+
+#ifndef __ASSEMBLY__
+
+#define arm64_image_flag_field(flags, field) \
+				(((flags) >> field##_SHIFT) & field##_MASK)
+
+/*
+ * struct arm64_image_header - arm64 kernel image header
+ * See Documentation/arch/arm64/booting.rst for details
+ *
+ * @code0:		Executable code, or
+ *   @mz_header		  alternatively used for part of MZ header
+ * @code1:		Executable code
+ * @text_offset:	Image load offset
+ * @image_size:		Effective Image size
+ * @flags:		kernel flags
+ * @reserved:		reserved
+ * @magic:		Magic number
+ * @reserved5:		reserved, or
+ *   @pe_header:	  alternatively used for PE COFF offset
+ */
+
+struct arm64_image_header {
+	__le32 code0;
+	__le32 code1;
+	__le64 text_offset;
+	__le64 image_size;
+	__le64 flags;
+	__le64 res2;
+	__le64 res3;
+	__le64 res4;
+	__le32 magic;
+	__le32 res5;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_IMAGE_H */
diff --git a/arch/arm64/include/asm/insn-def.h b/arch/arm64/include/asm/insn-def.h
new file mode 100644
index 000000000..1a7d0d483
--- /dev/null
+++ b/arch/arm64/include/asm/insn-def.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_INSN_DEF_H
+#define __ASM_INSN_DEF_H
+
+#include <asm/brk-imm.h>
+
+/* A64 instructions are always 32 bits. */
+#define	AARCH64_INSN_SIZE		4
+
+/*
+ * BRK instruction encoding
+ * The #imm16 value should be placed at bits[20:5] within BRK ins
+ */
+#define AARCH64_BREAK_MON	0xd4200000
+
+/*
+ * BRK instruction for provoking a fault on purpose
+ * Unlike kgdb, #imm16 value with unallocated handler is used for faulting.
+ */
+#define AARCH64_BREAK_FAULT	(AARCH64_BREAK_MON | (FAULT_BRK_IMM << 5))
+
+#endif /* __ASM_INSN_DEF_H */
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
new file mode 100644
index 000000000..db1aeacd4
--- /dev/null
+++ b/arch/arm64/include/asm/insn.h
@@ -0,0 +1,712 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Huawei Ltd.
+ * Author: Jiang Liu <liuj97@gmail.com>
+ *
+ * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com>
+ */
+#ifndef	__ASM_INSN_H
+#define	__ASM_INSN_H
+#include <linux/build_bug.h>
+#include <linux/types.h>
+
+#include <asm/insn-def.h>
+
+#ifndef __ASSEMBLY__
+
+enum aarch64_insn_hint_cr_op {
+	AARCH64_INSN_HINT_NOP	= 0x0 << 5,
+	AARCH64_INSN_HINT_YIELD	= 0x1 << 5,
+	AARCH64_INSN_HINT_WFE	= 0x2 << 5,
+	AARCH64_INSN_HINT_WFI	= 0x3 << 5,
+	AARCH64_INSN_HINT_SEV	= 0x4 << 5,
+	AARCH64_INSN_HINT_SEVL	= 0x5 << 5,
+
+	AARCH64_INSN_HINT_XPACLRI    = 0x07 << 5,
+	AARCH64_INSN_HINT_PACIA_1716 = 0x08 << 5,
+	AARCH64_INSN_HINT_PACIB_1716 = 0x0A << 5,
+	AARCH64_INSN_HINT_AUTIA_1716 = 0x0C << 5,
+	AARCH64_INSN_HINT_AUTIB_1716 = 0x0E << 5,
+	AARCH64_INSN_HINT_PACIAZ     = 0x18 << 5,
+	AARCH64_INSN_HINT_PACIASP    = 0x19 << 5,
+	AARCH64_INSN_HINT_PACIBZ     = 0x1A << 5,
+	AARCH64_INSN_HINT_PACIBSP    = 0x1B << 5,
+	AARCH64_INSN_HINT_AUTIAZ     = 0x1C << 5,
+	AARCH64_INSN_HINT_AUTIASP    = 0x1D << 5,
+	AARCH64_INSN_HINT_AUTIBZ     = 0x1E << 5,
+	AARCH64_INSN_HINT_AUTIBSP    = 0x1F << 5,
+
+	AARCH64_INSN_HINT_ESB  = 0x10 << 5,
+	AARCH64_INSN_HINT_PSB  = 0x11 << 5,
+	AARCH64_INSN_HINT_TSB  = 0x12 << 5,
+	AARCH64_INSN_HINT_CSDB = 0x14 << 5,
+	AARCH64_INSN_HINT_CLEARBHB = 0x16 << 5,
+
+	AARCH64_INSN_HINT_BTI   = 0x20 << 5,
+	AARCH64_INSN_HINT_BTIC  = 0x22 << 5,
+	AARCH64_INSN_HINT_BTIJ  = 0x24 << 5,
+	AARCH64_INSN_HINT_BTIJC = 0x26 << 5,
+};
+
+enum aarch64_insn_imm_type {
+	AARCH64_INSN_IMM_ADR,
+	AARCH64_INSN_IMM_26,
+	AARCH64_INSN_IMM_19,
+	AARCH64_INSN_IMM_16,
+	AARCH64_INSN_IMM_14,
+	AARCH64_INSN_IMM_12,
+	AARCH64_INSN_IMM_9,
+	AARCH64_INSN_IMM_7,
+	AARCH64_INSN_IMM_6,
+	AARCH64_INSN_IMM_S,
+	AARCH64_INSN_IMM_R,
+	AARCH64_INSN_IMM_N,
+	AARCH64_INSN_IMM_MAX
+};
+
+enum aarch64_insn_register_type {
+	AARCH64_INSN_REGTYPE_RT,
+	AARCH64_INSN_REGTYPE_RN,
+	AARCH64_INSN_REGTYPE_RT2,
+	AARCH64_INSN_REGTYPE_RM,
+	AARCH64_INSN_REGTYPE_RD,
+	AARCH64_INSN_REGTYPE_RA,
+	AARCH64_INSN_REGTYPE_RS,
+};
+
+enum aarch64_insn_register {
+	AARCH64_INSN_REG_0  = 0,
+	AARCH64_INSN_REG_1  = 1,
+	AARCH64_INSN_REG_2  = 2,
+	AARCH64_INSN_REG_3  = 3,
+	AARCH64_INSN_REG_4  = 4,
+	AARCH64_INSN_REG_5  = 5,
+	AARCH64_INSN_REG_6  = 6,
+	AARCH64_INSN_REG_7  = 7,
+	AARCH64_INSN_REG_8  = 8,
+	AARCH64_INSN_REG_9  = 9,
+	AARCH64_INSN_REG_10 = 10,
+	AARCH64_INSN_REG_11 = 11,
+	AARCH64_INSN_REG_12 = 12,
+	AARCH64_INSN_REG_13 = 13,
+	AARCH64_INSN_REG_14 = 14,
+	AARCH64_INSN_REG_15 = 15,
+	AARCH64_INSN_REG_16 = 16,
+	AARCH64_INSN_REG_17 = 17,
+	AARCH64_INSN_REG_18 = 18,
+	AARCH64_INSN_REG_19 = 19,
+	AARCH64_INSN_REG_20 = 20,
+	AARCH64_INSN_REG_21 = 21,
+	AARCH64_INSN_REG_22 = 22,
+	AARCH64_INSN_REG_23 = 23,
+	AARCH64_INSN_REG_24 = 24,
+	AARCH64_INSN_REG_25 = 25,
+	AARCH64_INSN_REG_26 = 26,
+	AARCH64_INSN_REG_27 = 27,
+	AARCH64_INSN_REG_28 = 28,
+	AARCH64_INSN_REG_29 = 29,
+	AARCH64_INSN_REG_FP = 29, /* Frame pointer */
+	AARCH64_INSN_REG_30 = 30,
+	AARCH64_INSN_REG_LR = 30, /* Link register */
+	AARCH64_INSN_REG_ZR = 31, /* Zero: as source register */
+	AARCH64_INSN_REG_SP = 31  /* Stack pointer: as load/store base reg */
+};
+
+enum aarch64_insn_special_register {
+	AARCH64_INSN_SPCLREG_SPSR_EL1	= 0xC200,
+	AARCH64_INSN_SPCLREG_ELR_EL1	= 0xC201,
+	AARCH64_INSN_SPCLREG_SP_EL0	= 0xC208,
+	AARCH64_INSN_SPCLREG_SPSEL	= 0xC210,
+	AARCH64_INSN_SPCLREG_CURRENTEL	= 0xC212,
+	AARCH64_INSN_SPCLREG_DAIF	= 0xDA11,
+	AARCH64_INSN_SPCLREG_NZCV	= 0xDA10,
+	AARCH64_INSN_SPCLREG_FPCR	= 0xDA20,
+	AARCH64_INSN_SPCLREG_DSPSR_EL0	= 0xDA28,
+	AARCH64_INSN_SPCLREG_DLR_EL0	= 0xDA29,
+	AARCH64_INSN_SPCLREG_SPSR_EL2	= 0xE200,
+	AARCH64_INSN_SPCLREG_ELR_EL2	= 0xE201,
+	AARCH64_INSN_SPCLREG_SP_EL1	= 0xE208,
+	AARCH64_INSN_SPCLREG_SPSR_INQ	= 0xE218,
+	AARCH64_INSN_SPCLREG_SPSR_ABT	= 0xE219,
+	AARCH64_INSN_SPCLREG_SPSR_UND	= 0xE21A,
+	AARCH64_INSN_SPCLREG_SPSR_FIQ	= 0xE21B,
+	AARCH64_INSN_SPCLREG_SPSR_EL3	= 0xF200,
+	AARCH64_INSN_SPCLREG_ELR_EL3	= 0xF201,
+	AARCH64_INSN_SPCLREG_SP_EL2	= 0xF210
+};
+
+enum aarch64_insn_variant {
+	AARCH64_INSN_VARIANT_32BIT,
+	AARCH64_INSN_VARIANT_64BIT
+};
+
+enum aarch64_insn_condition {
+	AARCH64_INSN_COND_EQ = 0x0, /* == */
+	AARCH64_INSN_COND_NE = 0x1, /* != */
+	AARCH64_INSN_COND_CS = 0x2, /* unsigned >= */
+	AARCH64_INSN_COND_CC = 0x3, /* unsigned < */
+	AARCH64_INSN_COND_MI = 0x4, /* < 0 */
+	AARCH64_INSN_COND_PL = 0x5, /* >= 0 */
+	AARCH64_INSN_COND_VS = 0x6, /* overflow */
+	AARCH64_INSN_COND_VC = 0x7, /* no overflow */
+	AARCH64_INSN_COND_HI = 0x8, /* unsigned > */
+	AARCH64_INSN_COND_LS = 0x9, /* unsigned <= */
+	AARCH64_INSN_COND_GE = 0xa, /* signed >= */
+	AARCH64_INSN_COND_LT = 0xb, /* signed < */
+	AARCH64_INSN_COND_GT = 0xc, /* signed > */
+	AARCH64_INSN_COND_LE = 0xd, /* signed <= */
+	AARCH64_INSN_COND_AL = 0xe, /* always */
+};
+
+enum aarch64_insn_branch_type {
+	AARCH64_INSN_BRANCH_NOLINK,
+	AARCH64_INSN_BRANCH_LINK,
+	AARCH64_INSN_BRANCH_RETURN,
+	AARCH64_INSN_BRANCH_COMP_ZERO,
+	AARCH64_INSN_BRANCH_COMP_NONZERO,
+};
+
+enum aarch64_insn_size_type {
+	AARCH64_INSN_SIZE_8,
+	AARCH64_INSN_SIZE_16,
+	AARCH64_INSN_SIZE_32,
+	AARCH64_INSN_SIZE_64,
+};
+
+enum aarch64_insn_ldst_type {
+	AARCH64_INSN_LDST_LOAD_REG_OFFSET,
+	AARCH64_INSN_LDST_STORE_REG_OFFSET,
+	AARCH64_INSN_LDST_LOAD_IMM_OFFSET,
+	AARCH64_INSN_LDST_STORE_IMM_OFFSET,
+	AARCH64_INSN_LDST_LOAD_PAIR_PRE_INDEX,
+	AARCH64_INSN_LDST_STORE_PAIR_PRE_INDEX,
+	AARCH64_INSN_LDST_LOAD_PAIR_POST_INDEX,
+	AARCH64_INSN_LDST_STORE_PAIR_POST_INDEX,
+	AARCH64_INSN_LDST_LOAD_EX,
+	AARCH64_INSN_LDST_LOAD_ACQ_EX,
+	AARCH64_INSN_LDST_STORE_EX,
+	AARCH64_INSN_LDST_STORE_REL_EX,
+	AARCH64_INSN_LDST_SIGNED_LOAD_IMM_OFFSET,
+	AARCH64_INSN_LDST_SIGNED_LOAD_REG_OFFSET,
+};
+
+enum aarch64_insn_adsb_type {
+	AARCH64_INSN_ADSB_ADD,
+	AARCH64_INSN_ADSB_SUB,
+	AARCH64_INSN_ADSB_ADD_SETFLAGS,
+	AARCH64_INSN_ADSB_SUB_SETFLAGS
+};
+
+enum aarch64_insn_movewide_type {
+	AARCH64_INSN_MOVEWIDE_ZERO,
+	AARCH64_INSN_MOVEWIDE_KEEP,
+	AARCH64_INSN_MOVEWIDE_INVERSE
+};
+
+enum aarch64_insn_bitfield_type {
+	AARCH64_INSN_BITFIELD_MOVE,
+	AARCH64_INSN_BITFIELD_MOVE_UNSIGNED,
+	AARCH64_INSN_BITFIELD_MOVE_SIGNED
+};
+
+enum aarch64_insn_data1_type {
+	AARCH64_INSN_DATA1_REVERSE_16,
+	AARCH64_INSN_DATA1_REVERSE_32,
+	AARCH64_INSN_DATA1_REVERSE_64,
+};
+
+enum aarch64_insn_data2_type {
+	AARCH64_INSN_DATA2_UDIV,
+	AARCH64_INSN_DATA2_SDIV,
+	AARCH64_INSN_DATA2_LSLV,
+	AARCH64_INSN_DATA2_LSRV,
+	AARCH64_INSN_DATA2_ASRV,
+	AARCH64_INSN_DATA2_RORV,
+};
+
+enum aarch64_insn_data3_type {
+	AARCH64_INSN_DATA3_MADD,
+	AARCH64_INSN_DATA3_MSUB,
+};
+
+enum aarch64_insn_logic_type {
+	AARCH64_INSN_LOGIC_AND,
+	AARCH64_INSN_LOGIC_BIC,
+	AARCH64_INSN_LOGIC_ORR,
+	AARCH64_INSN_LOGIC_ORN,
+	AARCH64_INSN_LOGIC_EOR,
+	AARCH64_INSN_LOGIC_EON,
+	AARCH64_INSN_LOGIC_AND_SETFLAGS,
+	AARCH64_INSN_LOGIC_BIC_SETFLAGS
+};
+
+enum aarch64_insn_prfm_type {
+	AARCH64_INSN_PRFM_TYPE_PLD,
+	AARCH64_INSN_PRFM_TYPE_PLI,
+	AARCH64_INSN_PRFM_TYPE_PST,
+};
+
+enum aarch64_insn_prfm_target {
+	AARCH64_INSN_PRFM_TARGET_L1,
+	AARCH64_INSN_PRFM_TARGET_L2,
+	AARCH64_INSN_PRFM_TARGET_L3,
+};
+
+enum aarch64_insn_prfm_policy {
+	AARCH64_INSN_PRFM_POLICY_KEEP,
+	AARCH64_INSN_PRFM_POLICY_STRM,
+};
+
+enum aarch64_insn_adr_type {
+	AARCH64_INSN_ADR_TYPE_ADRP,
+	AARCH64_INSN_ADR_TYPE_ADR,
+};
+
+enum aarch64_insn_mem_atomic_op {
+	AARCH64_INSN_MEM_ATOMIC_ADD,
+	AARCH64_INSN_MEM_ATOMIC_CLR,
+	AARCH64_INSN_MEM_ATOMIC_EOR,
+	AARCH64_INSN_MEM_ATOMIC_SET,
+	AARCH64_INSN_MEM_ATOMIC_SWP,
+};
+
+enum aarch64_insn_mem_order_type {
+	AARCH64_INSN_MEM_ORDER_NONE,
+	AARCH64_INSN_MEM_ORDER_ACQ,
+	AARCH64_INSN_MEM_ORDER_REL,
+	AARCH64_INSN_MEM_ORDER_ACQREL,
+};
+
+enum aarch64_insn_mb_type {
+	AARCH64_INSN_MB_SY,
+	AARCH64_INSN_MB_ST,
+	AARCH64_INSN_MB_LD,
+	AARCH64_INSN_MB_ISH,
+	AARCH64_INSN_MB_ISHST,
+	AARCH64_INSN_MB_ISHLD,
+	AARCH64_INSN_MB_NSH,
+	AARCH64_INSN_MB_NSHST,
+	AARCH64_INSN_MB_NSHLD,
+	AARCH64_INSN_MB_OSH,
+	AARCH64_INSN_MB_OSHST,
+	AARCH64_INSN_MB_OSHLD,
+};
+
+#define	__AARCH64_INSN_FUNCS(abbr, mask, val)				\
+static __always_inline bool aarch64_insn_is_##abbr(u32 code)		\
+{									\
+	BUILD_BUG_ON(~(mask) & (val));					\
+	return (code & (mask)) == (val);				\
+}									\
+static __always_inline u32 aarch64_insn_get_##abbr##_value(void)	\
+{									\
+	return (val);							\
+}
+
+/*
+ * ARM Architecture Reference Manual for ARMv8 Profile-A, Issue A.a
+ * Section C3.1 "A64 instruction index by encoding":
+ * AArch64 main encoding table
+ *  Bit position
+ *   28 27 26 25	Encoding Group
+ *   0  0  -  -		Unallocated
+ *   1  0  0  -		Data processing, immediate
+ *   1  0  1  -		Branch, exception generation and system instructions
+ *   -  1  -  0		Loads and stores
+ *   -  1  0  1		Data processing - register
+ *   0  1  1  1		Data processing - SIMD and floating point
+ *   1  1  1  1		Data processing - SIMD and floating point
+ * "-" means "don't care"
+ */
+__AARCH64_INSN_FUNCS(class_branch_sys,	0x1c000000, 0x14000000)
+
+__AARCH64_INSN_FUNCS(adr,	0x9F000000, 0x10000000)
+__AARCH64_INSN_FUNCS(adrp,	0x9F000000, 0x90000000)
+__AARCH64_INSN_FUNCS(prfm,	0x3FC00000, 0x39800000)
+__AARCH64_INSN_FUNCS(prfm_lit,	0xFF000000, 0xD8000000)
+__AARCH64_INSN_FUNCS(store_imm,	0x3FC00000, 0x39000000)
+__AARCH64_INSN_FUNCS(load_imm,	0x3FC00000, 0x39400000)
+__AARCH64_INSN_FUNCS(signed_load_imm, 0X3FC00000, 0x39800000)
+__AARCH64_INSN_FUNCS(store_pre,	0x3FE00C00, 0x38000C00)
+__AARCH64_INSN_FUNCS(load_pre,	0x3FE00C00, 0x38400C00)
+__AARCH64_INSN_FUNCS(store_post,	0x3FE00C00, 0x38000400)
+__AARCH64_INSN_FUNCS(load_post,	0x3FE00C00, 0x38400400)
+__AARCH64_INSN_FUNCS(str_reg,	0x3FE0EC00, 0x38206800)
+__AARCH64_INSN_FUNCS(str_imm,	0x3FC00000, 0x39000000)
+__AARCH64_INSN_FUNCS(ldadd,	0x3F20FC00, 0x38200000)
+__AARCH64_INSN_FUNCS(ldclr,	0x3F20FC00, 0x38201000)
+__AARCH64_INSN_FUNCS(ldeor,	0x3F20FC00, 0x38202000)
+__AARCH64_INSN_FUNCS(ldset,	0x3F20FC00, 0x38203000)
+__AARCH64_INSN_FUNCS(swp,	0x3F20FC00, 0x38208000)
+__AARCH64_INSN_FUNCS(cas,	0x3FA07C00, 0x08A07C00)
+__AARCH64_INSN_FUNCS(ldr_reg,	0x3FE0EC00, 0x38606800)
+__AARCH64_INSN_FUNCS(signed_ldr_reg, 0X3FE0FC00, 0x38A0E800)
+__AARCH64_INSN_FUNCS(ldr_imm,	0x3FC00000, 0x39400000)
+__AARCH64_INSN_FUNCS(ldr_lit,	0xBF000000, 0x18000000)
+__AARCH64_INSN_FUNCS(ldrsw_lit,	0xFF000000, 0x98000000)
+__AARCH64_INSN_FUNCS(exclusive,	0x3F800000, 0x08000000)
+__AARCH64_INSN_FUNCS(load_ex,	0x3F400000, 0x08400000)
+__AARCH64_INSN_FUNCS(store_ex,	0x3F400000, 0x08000000)
+__AARCH64_INSN_FUNCS(stp,	0x7FC00000, 0x29000000)
+__AARCH64_INSN_FUNCS(ldp,	0x7FC00000, 0x29400000)
+__AARCH64_INSN_FUNCS(stp_post,	0x7FC00000, 0x28800000)
+__AARCH64_INSN_FUNCS(ldp_post,	0x7FC00000, 0x28C00000)
+__AARCH64_INSN_FUNCS(stp_pre,	0x7FC00000, 0x29800000)
+__AARCH64_INSN_FUNCS(ldp_pre,	0x7FC00000, 0x29C00000)
+__AARCH64_INSN_FUNCS(add_imm,	0x7F000000, 0x11000000)
+__AARCH64_INSN_FUNCS(adds_imm,	0x7F000000, 0x31000000)
+__AARCH64_INSN_FUNCS(sub_imm,	0x7F000000, 0x51000000)
+__AARCH64_INSN_FUNCS(subs_imm,	0x7F000000, 0x71000000)
+__AARCH64_INSN_FUNCS(movn,	0x7F800000, 0x12800000)
+__AARCH64_INSN_FUNCS(sbfm,	0x7F800000, 0x13000000)
+__AARCH64_INSN_FUNCS(bfm,	0x7F800000, 0x33000000)
+__AARCH64_INSN_FUNCS(movz,	0x7F800000, 0x52800000)
+__AARCH64_INSN_FUNCS(ubfm,	0x7F800000, 0x53000000)
+__AARCH64_INSN_FUNCS(movk,	0x7F800000, 0x72800000)
+__AARCH64_INSN_FUNCS(add,	0x7F200000, 0x0B000000)
+__AARCH64_INSN_FUNCS(adds,	0x7F200000, 0x2B000000)
+__AARCH64_INSN_FUNCS(sub,	0x7F200000, 0x4B000000)
+__AARCH64_INSN_FUNCS(subs,	0x7F200000, 0x6B000000)
+__AARCH64_INSN_FUNCS(madd,	0x7FE08000, 0x1B000000)
+__AARCH64_INSN_FUNCS(msub,	0x7FE08000, 0x1B008000)
+__AARCH64_INSN_FUNCS(udiv,	0x7FE0FC00, 0x1AC00800)
+__AARCH64_INSN_FUNCS(sdiv,	0x7FE0FC00, 0x1AC00C00)
+__AARCH64_INSN_FUNCS(lslv,	0x7FE0FC00, 0x1AC02000)
+__AARCH64_INSN_FUNCS(lsrv,	0x7FE0FC00, 0x1AC02400)
+__AARCH64_INSN_FUNCS(asrv,	0x7FE0FC00, 0x1AC02800)
+__AARCH64_INSN_FUNCS(rorv,	0x7FE0FC00, 0x1AC02C00)
+__AARCH64_INSN_FUNCS(rev16,	0x7FFFFC00, 0x5AC00400)
+__AARCH64_INSN_FUNCS(rev32,	0x7FFFFC00, 0x5AC00800)
+__AARCH64_INSN_FUNCS(rev64,	0x7FFFFC00, 0x5AC00C00)
+__AARCH64_INSN_FUNCS(and,	0x7F200000, 0x0A000000)
+__AARCH64_INSN_FUNCS(bic,	0x7F200000, 0x0A200000)
+__AARCH64_INSN_FUNCS(orr,	0x7F200000, 0x2A000000)
+__AARCH64_INSN_FUNCS(mov_reg,	0x7FE0FFE0, 0x2A0003E0)
+__AARCH64_INSN_FUNCS(orn,	0x7F200000, 0x2A200000)
+__AARCH64_INSN_FUNCS(eor,	0x7F200000, 0x4A000000)
+__AARCH64_INSN_FUNCS(eon,	0x7F200000, 0x4A200000)
+__AARCH64_INSN_FUNCS(ands,	0x7F200000, 0x6A000000)
+__AARCH64_INSN_FUNCS(bics,	0x7F200000, 0x6A200000)
+__AARCH64_INSN_FUNCS(and_imm,	0x7F800000, 0x12000000)
+__AARCH64_INSN_FUNCS(orr_imm,	0x7F800000, 0x32000000)
+__AARCH64_INSN_FUNCS(eor_imm,	0x7F800000, 0x52000000)
+__AARCH64_INSN_FUNCS(ands_imm,	0x7F800000, 0x72000000)
+__AARCH64_INSN_FUNCS(extr,	0x7FA00000, 0x13800000)
+__AARCH64_INSN_FUNCS(b,		0xFC000000, 0x14000000)
+__AARCH64_INSN_FUNCS(bl,	0xFC000000, 0x94000000)
+__AARCH64_INSN_FUNCS(cbz,	0x7F000000, 0x34000000)
+__AARCH64_INSN_FUNCS(cbnz,	0x7F000000, 0x35000000)
+__AARCH64_INSN_FUNCS(tbz,	0x7F000000, 0x36000000)
+__AARCH64_INSN_FUNCS(tbnz,	0x7F000000, 0x37000000)
+__AARCH64_INSN_FUNCS(bcond,	0xFF000010, 0x54000000)
+__AARCH64_INSN_FUNCS(svc,	0xFFE0001F, 0xD4000001)
+__AARCH64_INSN_FUNCS(hvc,	0xFFE0001F, 0xD4000002)
+__AARCH64_INSN_FUNCS(smc,	0xFFE0001F, 0xD4000003)
+__AARCH64_INSN_FUNCS(brk,	0xFFE0001F, 0xD4200000)
+__AARCH64_INSN_FUNCS(exception,	0xFF000000, 0xD4000000)
+__AARCH64_INSN_FUNCS(hint,	0xFFFFF01F, 0xD503201F)
+__AARCH64_INSN_FUNCS(br,	0xFFFFFC1F, 0xD61F0000)
+__AARCH64_INSN_FUNCS(br_auth,	0xFEFFF800, 0xD61F0800)
+__AARCH64_INSN_FUNCS(blr,	0xFFFFFC1F, 0xD63F0000)
+__AARCH64_INSN_FUNCS(blr_auth,	0xFEFFF800, 0xD63F0800)
+__AARCH64_INSN_FUNCS(ret,	0xFFFFFC1F, 0xD65F0000)
+__AARCH64_INSN_FUNCS(ret_auth,	0xFFFFFBFF, 0xD65F0BFF)
+__AARCH64_INSN_FUNCS(eret,	0xFFFFFFFF, 0xD69F03E0)
+__AARCH64_INSN_FUNCS(eret_auth,	0xFFFFFBFF, 0xD69F0BFF)
+__AARCH64_INSN_FUNCS(mrs,	0xFFF00000, 0xD5300000)
+__AARCH64_INSN_FUNCS(msr_imm,	0xFFF8F01F, 0xD500401F)
+__AARCH64_INSN_FUNCS(msr_reg,	0xFFF00000, 0xD5100000)
+__AARCH64_INSN_FUNCS(dmb,	0xFFFFF0FF, 0xD50330BF)
+__AARCH64_INSN_FUNCS(dsb_base,	0xFFFFF0FF, 0xD503309F)
+__AARCH64_INSN_FUNCS(dsb_nxs,	0xFFFFF3FF, 0xD503323F)
+__AARCH64_INSN_FUNCS(isb,	0xFFFFF0FF, 0xD50330DF)
+__AARCH64_INSN_FUNCS(sb,	0xFFFFFFFF, 0xD50330FF)
+__AARCH64_INSN_FUNCS(clrex,	0xFFFFF0FF, 0xD503305F)
+__AARCH64_INSN_FUNCS(ssbb,	0xFFFFFFFF, 0xD503309F)
+__AARCH64_INSN_FUNCS(pssbb,	0xFFFFFFFF, 0xD503349F)
+__AARCH64_INSN_FUNCS(bti,	0xFFFFFF3F, 0xD503241f)
+
+#undef	__AARCH64_INSN_FUNCS
+
+static __always_inline bool aarch64_insn_is_steppable_hint(u32 insn)
+{
+	if (!aarch64_insn_is_hint(insn))
+		return false;
+
+	switch (insn & 0xFE0) {
+	case AARCH64_INSN_HINT_XPACLRI:
+	case AARCH64_INSN_HINT_PACIA_1716:
+	case AARCH64_INSN_HINT_PACIB_1716:
+	case AARCH64_INSN_HINT_PACIAZ:
+	case AARCH64_INSN_HINT_PACIASP:
+	case AARCH64_INSN_HINT_PACIBZ:
+	case AARCH64_INSN_HINT_PACIBSP:
+	case AARCH64_INSN_HINT_BTI:
+	case AARCH64_INSN_HINT_BTIC:
+	case AARCH64_INSN_HINT_BTIJ:
+	case AARCH64_INSN_HINT_BTIJC:
+	case AARCH64_INSN_HINT_NOP:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static __always_inline bool aarch64_insn_is_branch(u32 insn)
+{
+	/* b, bl, cb*, tb*, ret*, b.cond, br*, blr* */
+
+	return aarch64_insn_is_b(insn) ||
+	       aarch64_insn_is_bl(insn) ||
+	       aarch64_insn_is_cbz(insn) ||
+	       aarch64_insn_is_cbnz(insn) ||
+	       aarch64_insn_is_tbz(insn) ||
+	       aarch64_insn_is_tbnz(insn) ||
+	       aarch64_insn_is_ret(insn) ||
+	       aarch64_insn_is_ret_auth(insn) ||
+	       aarch64_insn_is_br(insn) ||
+	       aarch64_insn_is_br_auth(insn) ||
+	       aarch64_insn_is_blr(insn) ||
+	       aarch64_insn_is_blr_auth(insn) ||
+	       aarch64_insn_is_bcond(insn);
+}
+
+static __always_inline bool aarch64_insn_is_branch_imm(u32 insn)
+{
+	return aarch64_insn_is_b(insn) ||
+	       aarch64_insn_is_bl(insn) ||
+	       aarch64_insn_is_tbz(insn) ||
+	       aarch64_insn_is_tbnz(insn) ||
+	       aarch64_insn_is_cbz(insn) ||
+	       aarch64_insn_is_cbnz(insn) ||
+	       aarch64_insn_is_bcond(insn);
+}
+
+static __always_inline bool aarch64_insn_is_adr_adrp(u32 insn)
+{
+	return aarch64_insn_is_adr(insn) ||
+	       aarch64_insn_is_adrp(insn);
+}
+
+static __always_inline bool aarch64_insn_is_dsb(u32 insn)
+{
+	return aarch64_insn_is_dsb_base(insn) ||
+	       aarch64_insn_is_dsb_nxs(insn);
+}
+
+static __always_inline bool aarch64_insn_is_barrier(u32 insn)
+{
+	return aarch64_insn_is_dmb(insn) ||
+	       aarch64_insn_is_dsb(insn) ||
+	       aarch64_insn_is_isb(insn) ||
+	       aarch64_insn_is_sb(insn) ||
+	       aarch64_insn_is_clrex(insn) ||
+	       aarch64_insn_is_ssbb(insn) ||
+	       aarch64_insn_is_pssbb(insn);
+}
+
+static __always_inline bool aarch64_insn_is_store_single(u32 insn)
+{
+	return aarch64_insn_is_store_imm(insn) ||
+	       aarch64_insn_is_store_pre(insn) ||
+	       aarch64_insn_is_store_post(insn);
+}
+
+static __always_inline bool aarch64_insn_is_store_pair(u32 insn)
+{
+	return aarch64_insn_is_stp(insn) ||
+	       aarch64_insn_is_stp_pre(insn) ||
+	       aarch64_insn_is_stp_post(insn);
+}
+
+static __always_inline bool aarch64_insn_is_load_single(u32 insn)
+{
+	return aarch64_insn_is_load_imm(insn) ||
+	       aarch64_insn_is_load_pre(insn) ||
+	       aarch64_insn_is_load_post(insn);
+}
+
+static __always_inline bool aarch64_insn_is_load_pair(u32 insn)
+{
+	return aarch64_insn_is_ldp(insn) ||
+	       aarch64_insn_is_ldp_pre(insn) ||
+	       aarch64_insn_is_ldp_post(insn);
+}
+
+static __always_inline bool aarch64_insn_uses_literal(u32 insn)
+{
+	/* ldr/ldrsw (literal), prfm */
+
+	return aarch64_insn_is_ldr_lit(insn) ||
+	       aarch64_insn_is_ldrsw_lit(insn) ||
+	       aarch64_insn_is_adr_adrp(insn) ||
+	       aarch64_insn_is_prfm_lit(insn);
+}
+
+enum aarch64_insn_encoding_class aarch64_get_insn_class(u32 insn);
+u64 aarch64_insn_decode_immediate(enum aarch64_insn_imm_type type, u32 insn);
+u32 aarch64_insn_encode_immediate(enum aarch64_insn_imm_type type,
+				  u32 insn, u64 imm);
+u32 aarch64_insn_decode_register(enum aarch64_insn_register_type type,
+					 u32 insn);
+u32 aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr,
+				enum aarch64_insn_branch_type type);
+u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr,
+				     enum aarch64_insn_register reg,
+				     enum aarch64_insn_variant variant,
+				     enum aarch64_insn_branch_type type);
+u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr,
+				     enum aarch64_insn_condition cond);
+
+static __always_inline u32
+aarch64_insn_gen_hint(enum aarch64_insn_hint_cr_op op)
+{
+	return aarch64_insn_get_hint_value() | op;
+}
+
+static __always_inline u32 aarch64_insn_gen_nop(void)
+{
+	return aarch64_insn_gen_hint(AARCH64_INSN_HINT_NOP);
+}
+
+u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg,
+				enum aarch64_insn_branch_type type);
+u32 aarch64_insn_gen_load_store_reg(enum aarch64_insn_register reg,
+				    enum aarch64_insn_register base,
+				    enum aarch64_insn_register offset,
+				    enum aarch64_insn_size_type size,
+				    enum aarch64_insn_ldst_type type);
+u32 aarch64_insn_gen_load_store_imm(enum aarch64_insn_register reg,
+				    enum aarch64_insn_register base,
+				    unsigned int imm,
+				    enum aarch64_insn_size_type size,
+				    enum aarch64_insn_ldst_type type);
+u32 aarch64_insn_gen_load_literal(unsigned long pc, unsigned long addr,
+				  enum aarch64_insn_register reg,
+				  bool is64bit);
+u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1,
+				     enum aarch64_insn_register reg2,
+				     enum aarch64_insn_register base,
+				     int offset,
+				     enum aarch64_insn_variant variant,
+				     enum aarch64_insn_ldst_type type);
+u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
+				   enum aarch64_insn_register base,
+				   enum aarch64_insn_register state,
+				   enum aarch64_insn_size_type size,
+				   enum aarch64_insn_ldst_type type);
+u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst,
+				 enum aarch64_insn_register src,
+				 int imm, enum aarch64_insn_variant variant,
+				 enum aarch64_insn_adsb_type type);
+u32 aarch64_insn_gen_adr(unsigned long pc, unsigned long addr,
+			 enum aarch64_insn_register reg,
+			 enum aarch64_insn_adr_type type);
+u32 aarch64_insn_gen_bitfield(enum aarch64_insn_register dst,
+			      enum aarch64_insn_register src,
+			      int immr, int imms,
+			      enum aarch64_insn_variant variant,
+			      enum aarch64_insn_bitfield_type type);
+u32 aarch64_insn_gen_movewide(enum aarch64_insn_register dst,
+			      int imm, int shift,
+			      enum aarch64_insn_variant variant,
+			      enum aarch64_insn_movewide_type type);
+u32 aarch64_insn_gen_add_sub_shifted_reg(enum aarch64_insn_register dst,
+					 enum aarch64_insn_register src,
+					 enum aarch64_insn_register reg,
+					 int shift,
+					 enum aarch64_insn_variant variant,
+					 enum aarch64_insn_adsb_type type);
+u32 aarch64_insn_gen_data1(enum aarch64_insn_register dst,
+			   enum aarch64_insn_register src,
+			   enum aarch64_insn_variant variant,
+			   enum aarch64_insn_data1_type type);
+u32 aarch64_insn_gen_data2(enum aarch64_insn_register dst,
+			   enum aarch64_insn_register src,
+			   enum aarch64_insn_register reg,
+			   enum aarch64_insn_variant variant,
+			   enum aarch64_insn_data2_type type);
+u32 aarch64_insn_gen_data3(enum aarch64_insn_register dst,
+			   enum aarch64_insn_register src,
+			   enum aarch64_insn_register reg1,
+			   enum aarch64_insn_register reg2,
+			   enum aarch64_insn_variant variant,
+			   enum aarch64_insn_data3_type type);
+u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst,
+					 enum aarch64_insn_register src,
+					 enum aarch64_insn_register reg,
+					 int shift,
+					 enum aarch64_insn_variant variant,
+					 enum aarch64_insn_logic_type type);
+u32 aarch64_insn_gen_move_reg(enum aarch64_insn_register dst,
+			      enum aarch64_insn_register src,
+			      enum aarch64_insn_variant variant);
+u32 aarch64_insn_gen_logical_immediate(enum aarch64_insn_logic_type type,
+				       enum aarch64_insn_variant variant,
+				       enum aarch64_insn_register Rn,
+				       enum aarch64_insn_register Rd,
+				       u64 imm);
+u32 aarch64_insn_gen_extr(enum aarch64_insn_variant variant,
+			  enum aarch64_insn_register Rm,
+			  enum aarch64_insn_register Rn,
+			  enum aarch64_insn_register Rd,
+			  u8 lsb);
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
+				  enum aarch64_insn_register address,
+				  enum aarch64_insn_register value,
+				  enum aarch64_insn_size_type size,
+				  enum aarch64_insn_mem_atomic_op op,
+				  enum aarch64_insn_mem_order_type order);
+u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
+			 enum aarch64_insn_register address,
+			 enum aarch64_insn_register value,
+			 enum aarch64_insn_size_type size,
+			 enum aarch64_insn_mem_order_type order);
+#else
+static inline
+u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
+				  enum aarch64_insn_register address,
+				  enum aarch64_insn_register value,
+				  enum aarch64_insn_size_type size,
+				  enum aarch64_insn_mem_atomic_op op,
+				  enum aarch64_insn_mem_order_type order)
+{
+	return AARCH64_BREAK_FAULT;
+}
+
+static inline
+u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
+			 enum aarch64_insn_register address,
+			 enum aarch64_insn_register value,
+			 enum aarch64_insn_size_type size,
+			 enum aarch64_insn_mem_order_type order)
+{
+	return AARCH64_BREAK_FAULT;
+}
+#endif
+u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type);
+
+s32 aarch64_get_branch_offset(u32 insn);
+u32 aarch64_set_branch_offset(u32 insn, s32 offset);
+
+s32 aarch64_insn_adrp_get_offset(u32 insn);
+u32 aarch64_insn_adrp_set_offset(u32 insn, s32 offset);
+
+bool aarch32_insn_is_wide(u32 insn);
+
+#define A32_RN_OFFSET	16
+#define A32_RT_OFFSET	12
+#define A32_RT2_OFFSET	 0
+
+u32 aarch64_insn_extract_system_reg(u32 insn);
+u32 aarch32_insn_extract_reg_num(u32 insn, int offset);
+u32 aarch32_insn_mcr_extract_opc2(u32 insn);
+u32 aarch32_insn_mcr_extract_crm(u32 insn);
+
+typedef bool (pstate_check_t)(unsigned long);
+extern pstate_check_t * const aarch32_opcode_cond_checks[16];
+
+#endif /* __ASSEMBLY__ */
+
+#endif	/* __ASM_INSN_H */
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
new file mode 100644
index 000000000..3b694511b
--- /dev/null
+++ b/arch/arm64/include/asm/io.h
@@ -0,0 +1,185 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/io.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_IO_H
+#define __ASM_IO_H
+
+#include <linux/types.h>
+#include <linux/pgtable.h>
+
+#include <asm/byteorder.h>
+#include <asm/barrier.h>
+#include <asm/memory.h>
+#include <asm/early_ioremap.h>
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.
+ */
+#define __raw_writeb __raw_writeb
+static __always_inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+	asm volatile("strb %w0, [%1]" : : "rZ" (val), "r" (addr));
+}
+
+#define __raw_writew __raw_writew
+static __always_inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+	asm volatile("strh %w0, [%1]" : : "rZ" (val), "r" (addr));
+}
+
+#define __raw_writel __raw_writel
+static __always_inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+	asm volatile("str %w0, [%1]" : : "rZ" (val), "r" (addr));
+}
+
+#define __raw_writeq __raw_writeq
+static __always_inline void __raw_writeq(u64 val, volatile void __iomem *addr)
+{
+	asm volatile("str %x0, [%1]" : : "rZ" (val), "r" (addr));
+}
+
+#define __raw_readb __raw_readb
+static __always_inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 val;
+	asm volatile(ALTERNATIVE("ldrb %w0, [%1]",
+				 "ldarb %w0, [%1]",
+				 ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+		     : "=r" (val) : "r" (addr));
+	return val;
+}
+
+#define __raw_readw __raw_readw
+static __always_inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 val;
+
+	asm volatile(ALTERNATIVE("ldrh %w0, [%1]",
+				 "ldarh %w0, [%1]",
+				 ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+		     : "=r" (val) : "r" (addr));
+	return val;
+}
+
+#define __raw_readl __raw_readl
+static __always_inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 val;
+	asm volatile(ALTERNATIVE("ldr %w0, [%1]",
+				 "ldar %w0, [%1]",
+				 ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+		     : "=r" (val) : "r" (addr));
+	return val;
+}
+
+#define __raw_readq __raw_readq
+static __always_inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	u64 val;
+	asm volatile(ALTERNATIVE("ldr %0, [%1]",
+				 "ldar %0, [%1]",
+				 ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+		     : "=r" (val) : "r" (addr));
+	return val;
+}
+
+/* IO barriers */
+#define __io_ar(v)							\
+({									\
+	unsigned long tmp;						\
+									\
+	dma_rmb();								\
+									\
+	/*								\
+	 * Create a dummy control dependency from the IO read to any	\
+	 * later instructions. This ensures that a subsequent call to	\
+	 * udelay() will be ordered due to the ISB in get_cycles().	\
+	 */								\
+	asm volatile("eor	%0, %1, %1\n"				\
+		     "cbnz	%0, ."					\
+		     : "=r" (tmp) : "r" ((unsigned long)(v))		\
+		     : "memory");					\
+})
+
+#define __io_bw()		dma_wmb()
+#define __io_br(v)
+#define __io_aw(v)
+
+/* arm64-specific, don't use in portable drivers */
+#define __iormb(v)		__io_ar(v)
+#define __iowmb()		__io_bw()
+#define __iomb()		dma_mb()
+
+/*
+ *  I/O port access primitives.
+ */
+#define arch_has_dev_port()	(1)
+#define IO_SPACE_LIMIT		(PCI_IO_SIZE - 1)
+#define PCI_IOBASE		((void __iomem *)PCI_IO_START)
+
+/*
+ * String version of I/O memory access operations.
+ */
+extern void __memcpy_fromio(void *, const volatile void __iomem *, size_t);
+extern void __memcpy_toio(volatile void __iomem *, const void *, size_t);
+extern void __memset_io(volatile void __iomem *, int, size_t);
+
+#define memset_io(c,v,l)	__memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)	__memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)	__memcpy_toio((c),(a),(l))
+
+/*
+ * I/O memory mapping functions.
+ */
+
+#define ioremap_prot ioremap_prot
+
+#define _PAGE_IOREMAP PROT_DEVICE_nGnRE
+
+#define ioremap_wc(addr, size)	\
+	ioremap_prot((addr), (size), PROT_NORMAL_NC)
+#define ioremap_np(addr, size)	\
+	ioremap_prot((addr), (size), PROT_DEVICE_nGnRnE)
+
+/*
+ * io{read,write}{16,32,64}be() macros
+ */
+#define ioread16be(p)		({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(__v); __v; })
+#define ioread32be(p)		({ __u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(__v); __v; })
+#define ioread64be(p)		({ __u64 __v = be64_to_cpu((__force __be64)__raw_readq(p)); __iormb(__v); __v; })
+
+#define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force __u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
+#define iowrite64be(v,p)	({ __iowmb(); __raw_writeq((__force __u64)cpu_to_be64(v), p); })
+
+#include <asm-generic/io.h>
+
+#define ioremap_cache ioremap_cache
+static inline void __iomem *ioremap_cache(phys_addr_t addr, size_t size)
+{
+	if (pfn_is_map_memory(__phys_to_pfn(addr)))
+		return (void __iomem *)__phys_to_virt(addr);
+
+	return ioremap_prot(addr, size, PROT_NORMAL);
+}
+
+/*
+ * More restrictive address range checking than the default implementation
+ * (PHYS_OFFSET and PHYS_MASK taken into account).
+ */
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+
+extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+					unsigned long flags);
+#define arch_memremap_can_ram_remap arch_memremap_can_ram_remap
+
+#endif	/* __ASM_IO_H */
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
new file mode 100644
index 000000000..fac08e18b
--- /dev/null
+++ b/arch/arm64/include/asm/irq.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_IRQ_H
+#define __ASM_IRQ_H
+
+#ifndef __ASSEMBLER__
+
+#include <asm-generic/irq.h>
+
+struct pt_regs;
+
+int set_handle_irq(void (*handle_irq)(struct pt_regs *));
+#define set_handle_irq	set_handle_irq
+int set_handle_fiq(void (*handle_fiq)(struct pt_regs *));
+
+static inline int nr_legacy_irqs(void)
+{
+	return 0;
+}
+
+#endif /* !__ASSEMBLER__ */
+#endif
diff --git a/arch/arm64/include/asm/irq_work.h b/arch/arm64/include/asm/irq_work.h
new file mode 100644
index 000000000..81bbfa3a0
--- /dev/null
+++ b/arch/arm64/include/asm/irq_work.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_IRQ_WORK_H
+#define __ASM_IRQ_WORK_H
+
+extern void arch_irq_work_raise(void);
+
+static inline bool arch_irq_work_has_interrupt(void)
+{
+	return true;
+}
+
+#endif /* __ASM_IRQ_WORK_H */
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
new file mode 100644
index 000000000..1f31ec146
--- /dev/null
+++ b/arch/arm64/include/asm/irqflags.h
@@ -0,0 +1,206 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_IRQFLAGS_H
+#define __ASM_IRQFLAGS_H
+
+#include <asm/alternative.h>
+#include <asm/barrier.h>
+#include <asm/ptrace.h>
+#include <asm/sysreg.h>
+
+/*
+ * Aarch64 has flags for masking: Debug, Asynchronous (serror), Interrupts and
+ * FIQ exceptions, in the 'daif' register. We mask and unmask them in 'daif'
+ * order:
+ * Masking debug exceptions causes all other exceptions to be masked too/
+ * Masking SError masks IRQ/FIQ, but not debug exceptions. IRQ and FIQ are
+ * always masked and unmasked together, and have no side effects for other
+ * flags. Keeping to this order makes it easier for entry.S to know which
+ * exceptions should be unmasked.
+ */
+
+static __always_inline bool __irqflags_uses_pmr(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
+	       alternative_has_cap_unlikely(ARM64_HAS_GIC_PRIO_MASKING);
+}
+
+static __always_inline void __daif_local_irq_enable(void)
+{
+	barrier();
+	asm volatile("msr daifclr, #3");
+	barrier();
+}
+
+static __always_inline void __pmr_local_irq_enable(void)
+{
+	if (IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING)) {
+		u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1);
+		WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF);
+	}
+
+	barrier();
+	write_sysreg_s(GIC_PRIO_IRQON, SYS_ICC_PMR_EL1);
+	pmr_sync();
+	barrier();
+}
+
+static inline void arch_local_irq_enable(void)
+{
+	if (__irqflags_uses_pmr()) {
+		__pmr_local_irq_enable();
+	} else {
+		__daif_local_irq_enable();
+	}
+}
+
+static __always_inline void __daif_local_irq_disable(void)
+{
+	barrier();
+	asm volatile("msr daifset, #3");
+	barrier();
+}
+
+static __always_inline void __pmr_local_irq_disable(void)
+{
+	if (IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING)) {
+		u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1);
+		WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF);
+	}
+
+	barrier();
+	write_sysreg_s(GIC_PRIO_IRQOFF, SYS_ICC_PMR_EL1);
+	barrier();
+}
+
+static inline void arch_local_irq_disable(void)
+{
+	if (__irqflags_uses_pmr()) {
+		__pmr_local_irq_disable();
+	} else {
+		__daif_local_irq_disable();
+	}
+}
+
+static __always_inline unsigned long __daif_local_save_flags(void)
+{
+	return read_sysreg(daif);
+}
+
+static __always_inline unsigned long __pmr_local_save_flags(void)
+{
+	return read_sysreg_s(SYS_ICC_PMR_EL1);
+}
+
+/*
+ * Save the current interrupt enable state.
+ */
+static inline unsigned long arch_local_save_flags(void)
+{
+	if (__irqflags_uses_pmr()) {
+		return __pmr_local_save_flags();
+	} else {
+		return __daif_local_save_flags();
+	}
+}
+
+static __always_inline bool __daif_irqs_disabled_flags(unsigned long flags)
+{
+	return flags & PSR_I_BIT;
+}
+
+static __always_inline bool __pmr_irqs_disabled_flags(unsigned long flags)
+{
+	return flags != GIC_PRIO_IRQON;
+}
+
+static inline bool arch_irqs_disabled_flags(unsigned long flags)
+{
+	if (__irqflags_uses_pmr()) {
+		return __pmr_irqs_disabled_flags(flags);
+	} else {
+		return __daif_irqs_disabled_flags(flags);
+	}
+}
+
+static __always_inline bool __daif_irqs_disabled(void)
+{
+	return __daif_irqs_disabled_flags(__daif_local_save_flags());
+}
+
+static __always_inline bool __pmr_irqs_disabled(void)
+{
+	return __pmr_irqs_disabled_flags(__pmr_local_save_flags());
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+	if (__irqflags_uses_pmr()) {
+		return __pmr_irqs_disabled();
+	} else {
+		return __daif_irqs_disabled();
+	}
+}
+
+static __always_inline unsigned long __daif_local_irq_save(void)
+{
+	unsigned long flags = __daif_local_save_flags();
+
+	__daif_local_irq_disable();
+
+	return flags;
+}
+
+static __always_inline unsigned long __pmr_local_irq_save(void)
+{
+	unsigned long flags = __pmr_local_save_flags();
+
+	/*
+	 * There are too many states with IRQs disabled, just keep the current
+	 * state if interrupts are already disabled/masked.
+	 */
+	if (!__pmr_irqs_disabled_flags(flags))
+		__pmr_local_irq_disable();
+
+	return flags;
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+	if (__irqflags_uses_pmr()) {
+		return __pmr_local_irq_save();
+	} else {
+		return __daif_local_irq_save();
+	}
+}
+
+static __always_inline void __daif_local_irq_restore(unsigned long flags)
+{
+	barrier();
+	write_sysreg(flags, daif);
+	barrier();
+}
+
+static __always_inline void __pmr_local_irq_restore(unsigned long flags)
+{
+	barrier();
+	write_sysreg_s(flags, SYS_ICC_PMR_EL1);
+	pmr_sync();
+	barrier();
+}
+
+/*
+ * restore saved IRQ state
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	if (__irqflags_uses_pmr()) {
+		__pmr_local_irq_restore(flags);
+	} else {
+		__daif_local_irq_restore(flags);
+	}
+}
+
+#endif /* __ASM_IRQFLAGS_H */
diff --git a/arch/arm64/include/asm/jump_label.h b/arch/arm64/include/asm/jump_label.h
new file mode 100644
index 000000000..48ddc0f45
--- /dev/null
+++ b/arch/arm64/include/asm/jump_label.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Huawei Ltd.
+ * Author: Jiang Liu <liuj97@gmail.com>
+ *
+ * Based on arch/arm/include/asm/jump_label.h
+ */
+#ifndef __ASM_JUMP_LABEL_H
+#define __ASM_JUMP_LABEL_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/insn.h>
+
+#define JUMP_LABEL_NOP_SIZE		AARCH64_INSN_SIZE
+
+static __always_inline bool arch_static_branch(struct static_key * const key,
+					       const bool branch)
+{
+	asm_volatile_goto(
+		"1:	nop					\n\t"
+		 "	.pushsection	__jump_table, \"aw\"	\n\t"
+		 "	.align		3			\n\t"
+		 "	.long		1b - ., %l[l_yes] - .	\n\t"
+		 "	.quad		%c0 - .			\n\t"
+		 "	.popsection				\n\t"
+		 :  :  "i"(&((char *)key)[branch]) :  : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+static __always_inline bool arch_static_branch_jump(struct static_key * const key,
+						    const bool branch)
+{
+	asm_volatile_goto(
+		"1:	b		%l[l_yes]		\n\t"
+		 "	.pushsection	__jump_table, \"aw\"	\n\t"
+		 "	.align		3			\n\t"
+		 "	.long		1b - ., %l[l_yes] - .	\n\t"
+		 "	.quad		%c0 - .			\n\t"
+		 "	.popsection				\n\t"
+		 :  :  "i"(&((char *)key)[branch]) :  : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+#endif  /* __ASSEMBLY__ */
+#endif	/* __ASM_JUMP_LABEL_H */
diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
new file mode 100644
index 000000000..12d5f47f7
--- /dev/null
+++ b/arch/arm64/include/asm/kasan.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_KASAN_H
+#define __ASM_KASAN_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <asm/memory.h>
+#include <asm/mte-kasan.h>
+#include <asm/pgtable-types.h>
+
+#define arch_kasan_set_tag(addr, tag)	__tag_set(addr, tag)
+#define arch_kasan_reset_tag(addr)	__tag_reset(addr)
+#define arch_kasan_get_tag(addr)	__tag_get(addr)
+
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+
+void kasan_init(void);
+
+/*
+ * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
+ * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/N of kernel virtual addresses,
+ * where N = (1 << KASAN_SHADOW_SCALE_SHIFT).
+ *
+ * KASAN_SHADOW_OFFSET:
+ * This value is used to map an address to the corresponding shadow
+ * address by the following formula:
+ *     shadow_addr = (address >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
+ *
+ * (1 << (64 - KASAN_SHADOW_SCALE_SHIFT)) shadow addresses that lie in range
+ * [KASAN_SHADOW_OFFSET, KASAN_SHADOW_END) cover all 64-bits of virtual
+ * addresses. So KASAN_SHADOW_OFFSET should satisfy the following equation:
+ *      KASAN_SHADOW_OFFSET = KASAN_SHADOW_END -
+ *				(1ULL << (64 - KASAN_SHADOW_SCALE_SHIFT))
+ */
+#define _KASAN_SHADOW_START(va)	(KASAN_SHADOW_END - (1UL << ((va) - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_SHADOW_START      _KASAN_SHADOW_START(vabits_actual)
+
+void kasan_copy_shadow(pgd_t *pgdir);
+asmlinkage void kasan_early_init(void);
+
+#else
+static inline void kasan_init(void) { }
+static inline void kasan_copy_shadow(pgd_t *pgdir) { }
+#endif
+
+#endif
+#endif
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
new file mode 100644
index 000000000..85d26143f
--- /dev/null
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Kernel page table mapping
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ */
+
+#ifndef __ASM_KERNEL_PGTABLE_H
+#define __ASM_KERNEL_PGTABLE_H
+
+#include <asm/boot.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/sparsemem.h>
+
+/*
+ * The linear mapping and the start of memory are both 2M aligned (per
+ * the arm64 booting.txt requirements). Hence we can use section mapping
+ * with 4K (section size = 2M) but not with 16K (section size = 32M) or
+ * 64K (section size = 512M).
+ */
+
+/*
+ * The idmap and swapper page tables need some space reserved in the kernel
+ * image. Both require pgd, pud (4 levels only) and pmd tables to (section)
+ * map the kernel. With the 64K page configuration, swapper and idmap need to
+ * map to pte level. The swapper also maps the FDT (see __create_page_tables
+ * for more information). Note that the number of ID map translation levels
+ * could be increased on the fly if system RAM is out of reach for the default
+ * VA range, so pages required to map highest possible PA are reserved in all
+ * cases.
+ */
+#ifdef CONFIG_ARM64_4K_PAGES
+#define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS - 1)
+#else
+#define SWAPPER_PGTABLE_LEVELS	(CONFIG_PGTABLE_LEVELS)
+#endif
+
+
+/*
+ * If KASLR is enabled, then an offset K is added to the kernel address
+ * space. The bottom 21 bits of this offset are zero to guarantee 2MB
+ * alignment for PA and VA.
+ *
+ * For each pagetable level of the swapper, we know that the shift will
+ * be larger than 21 (for the 4KB granule case we use section maps thus
+ * the smallest shift is actually 30) thus there is the possibility that
+ * KASLR can increase the number of pagetable entries by 1, so we make
+ * room for this extra entry.
+ *
+ * Note KASLR cannot increase the number of required entries for a level
+ * by more than one because it increments both the virtual start and end
+ * addresses equally (the extra entry comes from the case where the end
+ * address is just pushed over a boundary and the start address isn't).
+ */
+
+#ifdef CONFIG_RANDOMIZE_BASE
+#define EARLY_KASLR	(1)
+#else
+#define EARLY_KASLR	(0)
+#endif
+
+#define SPAN_NR_ENTRIES(vstart, vend, shift) \
+	((((vend) - 1) >> (shift)) - ((vstart) >> (shift)) + 1)
+
+#define EARLY_ENTRIES(vstart, vend, shift, add) \
+	(SPAN_NR_ENTRIES(vstart, vend, shift) + (add))
+
+#define EARLY_PGDS(vstart, vend, add) (EARLY_ENTRIES(vstart, vend, PGDIR_SHIFT, add))
+
+#if SWAPPER_PGTABLE_LEVELS > 3
+#define EARLY_PUDS(vstart, vend, add) (EARLY_ENTRIES(vstart, vend, PUD_SHIFT, add))
+#else
+#define EARLY_PUDS(vstart, vend, add) (0)
+#endif
+
+#if SWAPPER_PGTABLE_LEVELS > 2
+#define EARLY_PMDS(vstart, vend, add) (EARLY_ENTRIES(vstart, vend, SWAPPER_TABLE_SHIFT, add))
+#else
+#define EARLY_PMDS(vstart, vend, add) (0)
+#endif
+
+#define EARLY_PAGES(vstart, vend, add) ( 1 			/* PGDIR page */				\
+			+ EARLY_PGDS((vstart), (vend), add) 	/* each PGDIR needs a next level page table */	\
+			+ EARLY_PUDS((vstart), (vend), add)	/* each PUD needs a next level page table */	\
+			+ EARLY_PMDS((vstart), (vend), add))	/* each PMD needs a next level page table */
+#define INIT_DIR_SIZE (PAGE_SIZE * EARLY_PAGES(KIMAGE_VADDR, _end, EARLY_KASLR))
+
+/* the initial ID map may need two extra pages if it needs to be extended */
+#if VA_BITS < 48
+#define INIT_IDMAP_DIR_SIZE	((INIT_IDMAP_DIR_PAGES + 2) * PAGE_SIZE)
+#else
+#define INIT_IDMAP_DIR_SIZE	(INIT_IDMAP_DIR_PAGES * PAGE_SIZE)
+#endif
+#define INIT_IDMAP_DIR_PAGES	EARLY_PAGES(KIMAGE_VADDR, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE, 1)
+
+/* Initial memory map size */
+#ifdef CONFIG_ARM64_4K_PAGES
+#define SWAPPER_BLOCK_SHIFT	PMD_SHIFT
+#define SWAPPER_BLOCK_SIZE	PMD_SIZE
+#define SWAPPER_TABLE_SHIFT	PUD_SHIFT
+#else
+#define SWAPPER_BLOCK_SHIFT	PAGE_SHIFT
+#define SWAPPER_BLOCK_SIZE	PAGE_SIZE
+#define SWAPPER_TABLE_SHIFT	PMD_SHIFT
+#endif
+
+/*
+ * Initial memory map attributes.
+ */
+#define SWAPPER_PTE_FLAGS	(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED | PTE_UXN)
+#define SWAPPER_PMD_FLAGS	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S | PTE_UXN)
+
+#ifdef CONFIG_ARM64_4K_PAGES
+#define SWAPPER_RW_MMUFLAGS	(PMD_ATTRINDX(MT_NORMAL) | SWAPPER_PMD_FLAGS | PTE_WRITE)
+#define SWAPPER_RX_MMUFLAGS	(SWAPPER_RW_MMUFLAGS | PMD_SECT_RDONLY)
+#else
+#define SWAPPER_RW_MMUFLAGS	(PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS | PTE_WRITE)
+#define SWAPPER_RX_MMUFLAGS	(SWAPPER_RW_MMUFLAGS | PTE_RDONLY)
+#endif
+
+#endif	/* __ASM_KERNEL_PGTABLE_H */
diff --git a/arch/arm64/include/asm/kexec.h b/arch/arm64/include/asm/kexec.h
new file mode 100644
index 000000000..9ac9572a3
--- /dev/null
+++ b/arch/arm64/include/asm/kexec.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ */
+
+#ifndef _ARM64_KEXEC_H
+#define _ARM64_KEXEC_H
+
+/* Maximum physical address we can use pages from */
+
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can reach in physical address mode */
+
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_CONTROL_PAGE_SIZE 4096
+
+#define KEXEC_ARCH KEXEC_ARCH_AARCH64
+
+#ifndef __ASSEMBLY__
+
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ *
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ */
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		u64 tmp1, tmp2;
+
+		__asm__ __volatile__ (
+			"stp	 x0,   x1, [%2, #16 *  0]\n"
+			"stp	 x2,   x3, [%2, #16 *  1]\n"
+			"stp	 x4,   x5, [%2, #16 *  2]\n"
+			"stp	 x6,   x7, [%2, #16 *  3]\n"
+			"stp	 x8,   x9, [%2, #16 *  4]\n"
+			"stp	x10,  x11, [%2, #16 *  5]\n"
+			"stp	x12,  x13, [%2, #16 *  6]\n"
+			"stp	x14,  x15, [%2, #16 *  7]\n"
+			"stp	x16,  x17, [%2, #16 *  8]\n"
+			"stp	x18,  x19, [%2, #16 *  9]\n"
+			"stp	x20,  x21, [%2, #16 * 10]\n"
+			"stp	x22,  x23, [%2, #16 * 11]\n"
+			"stp	x24,  x25, [%2, #16 * 12]\n"
+			"stp	x26,  x27, [%2, #16 * 13]\n"
+			"stp	x28,  x29, [%2, #16 * 14]\n"
+			"mov	 %0,  sp\n"
+			"stp	x30,  %0,  [%2, #16 * 15]\n"
+
+			"/* faked current PSTATE */\n"
+			"mrs	 %0, CurrentEL\n"
+			"mrs	 %1, SPSEL\n"
+			"orr	 %0, %0, %1\n"
+			"mrs	 %1, DAIF\n"
+			"orr	 %0, %0, %1\n"
+			"mrs	 %1, NZCV\n"
+			"orr	 %0, %0, %1\n"
+			/* pc */
+			"adr	 %1, 1f\n"
+		"1:\n"
+			"stp	 %1, %0,   [%2, #16 * 16]\n"
+			: "=&r" (tmp1), "=&r" (tmp2)
+			: "r" (newregs)
+			: "memory"
+		);
+	}
+}
+
+#if defined(CONFIG_KEXEC_CORE) && defined(CONFIG_HIBERNATION)
+extern bool crash_is_nosave(unsigned long pfn);
+extern void crash_prepare_suspend(void);
+extern void crash_post_resume(void);
+
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
+#define crash_free_reserved_phys_range crash_free_reserved_phys_range
+#else
+static inline bool crash_is_nosave(unsigned long pfn) {return false; }
+static inline void crash_prepare_suspend(void) {}
+static inline void crash_post_resume(void) {}
+#endif
+
+struct kimage;
+
+#if defined(CONFIG_KEXEC_CORE)
+void cpu_soft_restart(unsigned long el2_switch, unsigned long entry,
+		      unsigned long arg0, unsigned long arg1,
+		      unsigned long arg2);
+
+int machine_kexec_post_load(struct kimage *image);
+#define machine_kexec_post_load machine_kexec_post_load
+#endif
+
+#define ARCH_HAS_KIMAGE_ARCH
+
+struct kimage_arch {
+	void *dtb;
+	phys_addr_t dtb_mem;
+	phys_addr_t kern_reloc;
+	phys_addr_t el2_vectors;
+	phys_addr_t ttbr0;
+	phys_addr_t ttbr1;
+	phys_addr_t zero_page;
+	unsigned long phys_offset;
+	unsigned long t0sz;
+};
+
+#ifdef CONFIG_KEXEC_FILE
+extern const struct kexec_file_ops kexec_image_ops;
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image);
+#define arch_kimage_file_post_load_cleanup arch_kimage_file_post_load_cleanup
+
+extern int load_other_segments(struct kimage *image,
+		unsigned long kernel_load_addr, unsigned long kernel_size,
+		char *initrd, unsigned long initrd_len,
+		char *cmdline);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm64/include/asm/kfence.h b/arch/arm64/include/asm/kfence.h
new file mode 100644
index 000000000..a81937fae
--- /dev/null
+++ b/arch/arm64/include/asm/kfence.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arm64 KFENCE support.
+ *
+ * Copyright (C) 2020, Google LLC.
+ */
+
+#ifndef __ASM_KFENCE_H
+#define __ASM_KFENCE_H
+
+#include <asm/set_memory.h>
+
+static inline bool arch_kfence_init_pool(void) { return true; }
+
+static inline bool kfence_protect_page(unsigned long addr, bool protect)
+{
+	set_memory_valid(addr, 1, !protect);
+
+	return true;
+}
+
+#ifdef CONFIG_KFENCE
+extern bool kfence_early_init;
+static inline bool arm64_kfence_can_set_direct_map(void)
+{
+	return !kfence_early_init;
+}
+#else /* CONFIG_KFENCE */
+static inline bool arm64_kfence_can_set_direct_map(void) { return false; }
+#endif /* CONFIG_KFENCE */
+
+#endif /* __ASM_KFENCE_H */
diff --git a/arch/arm64/include/asm/kgdb.h b/arch/arm64/include/asm/kgdb.h
new file mode 100644
index 000000000..21fc85e9d
--- /dev/null
+++ b/arch/arm64/include/asm/kgdb.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AArch64 KGDB support
+ *
+ * Based on arch/arm/include/kgdb.h
+ *
+ * Copyright (C) 2013 Cavium Inc.
+ * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com>
+ */
+
+#ifndef __ARM_KGDB_H
+#define __ARM_KGDB_H
+
+#include <linux/ptrace.h>
+#include <asm/debug-monitors.h>
+
+#ifndef	__ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm ("brk %0" : : "I" (KGDB_COMPILED_DBG_BRK_IMM));
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * gdb remote procotol (well most versions of it) expects the following
+ * register layout.
+ *
+ * General purpose regs:
+ *     r0-r30: 64 bit
+ *     sp,pc : 64 bit
+ *     pstate  : 32 bit
+ *     Total: 33 + 1
+ * FPU regs:
+ *     f0-f31: 128 bit
+ *     fpsr & fpcr: 32 bit
+ *     Total: 32 + 2
+ *
+ * To expand a little on the "most versions of it"... when the gdb remote
+ * protocol for AArch64 was developed it depended on a statement in the
+ * Architecture Reference Manual that claimed "SPSR_ELx is a 32-bit register".
+ * and, as a result, allocated only 32-bits for the PSTATE in the remote
+ * protocol. In fact this statement is still present in ARM DDI 0487A.i.
+ *
+ * Unfortunately "is a 32-bit register" has a very special meaning for
+ * system registers. It means that "the upper bits, bits[63:32], are
+ * RES0.". RES0 is heavily used in the ARM architecture documents as a
+ * way to leave space for future architecture changes. So to translate a
+ * little for people who don't spend their spare time reading ARM architecture
+ * manuals, what "is a 32-bit register" actually means in this context is
+ * "is a 64-bit register but one with no meaning allocated to any of the
+ * upper 32-bits... *yet*".
+ *
+ * Perhaps then we should not be surprised that this has led to some
+ * confusion. Specifically a patch, influenced by the above translation,
+ * that extended PSTATE to 64-bit was accepted into gdb-7.7 but the patch
+ * was reverted in gdb-7.8.1 and all later releases, when this was
+ * discovered to be an undocumented protocol change.
+ *
+ * So... it is *not* wrong for us to only allocate 32-bits to PSTATE
+ * here even though the kernel itself allocates 64-bits for the same
+ * state. That is because this bit of code tells the kernel how the gdb
+ * remote protocol (well most versions of it) describes the register state.
+ *
+ * Note that if you are using one of the versions of gdb that supports
+ * the gdb-7.7 version of the protocol you cannot use kgdb directly
+ * without providing a custom register description (gdb can load new
+ * protocol descriptions at runtime).
+ */
+
+#define _GP_REGS		33
+#define _FP_REGS		32
+#define _EXTRA_REGS		3
+/*
+ * general purpose registers size in bytes.
+ * pstate is only 4 bytes. subtract 4 bytes
+ */
+#define GP_REG_BYTES		(_GP_REGS * 8)
+#define DBG_MAX_REG_NUM		(_GP_REGS + _FP_REGS + _EXTRA_REGS)
+
+/*
+ * Size of I/O buffer for gdb packet.
+ * considering to hold all register contents, size is set
+ */
+
+#define BUFMAX			2048
+
+/*
+ * Number of bytes required for gdb_regs buffer.
+ * _GP_REGS: 8 bytes, _FP_REGS: 16 bytes and _EXTRA_REGS: 4 bytes each
+ * GDB fails to connect for size beyond this with error
+ * "'g' packet reply is too long"
+ */
+
+#define NUMREGBYTES	((_GP_REGS * 8) + (_FP_REGS * 16) + \
+			(_EXTRA_REGS * 4))
+
+#endif /* __ASM_KGDB_H */
diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
new file mode 100644
index 000000000..05cd82eec
--- /dev/null
+++ b/arch/arm64/include/asm/kprobes.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/kprobes.h
+ *
+ * Copyright (C) 2013 Linaro Limited
+ */
+
+#ifndef _ARM_KPROBES_H
+#define _ARM_KPROBES_H
+
+#include <asm-generic/kprobes.h>
+
+#ifdef CONFIG_KPROBES
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+#include <asm/probes.h>
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	unsigned long saved_irqflag;
+	struct prev_kprobe prev_kprobe;
+};
+
+void arch_remove_kprobe(struct kprobe *);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+void __kretprobe_trampoline(void);
+void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
+
+#endif /* CONFIG_KPROBES */
+#endif /* _ARM_KPROBES_H */
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
new file mode 100644
index 000000000..1095c6647
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -0,0 +1,422 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_ARM_H__
+#define __ARM64_KVM_ARM_H__
+
+#include <asm/esr.h>
+#include <asm/memory.h>
+#include <asm/sysreg.h>
+#include <asm/types.h>
+
+/* Hyp Configuration Register (HCR) bits */
+
+#define HCR_TID5	(UL(1) << 58)
+#define HCR_DCT		(UL(1) << 57)
+#define HCR_ATA_SHIFT	56
+#define HCR_ATA		(UL(1) << HCR_ATA_SHIFT)
+#define HCR_TTLBOS	(UL(1) << 55)
+#define HCR_TTLBIS	(UL(1) << 54)
+#define HCR_ENSCXT	(UL(1) << 53)
+#define HCR_TOCU	(UL(1) << 52)
+#define HCR_AMVOFFEN	(UL(1) << 51)
+#define HCR_TICAB	(UL(1) << 50)
+#define HCR_TID4	(UL(1) << 49)
+#define HCR_FIEN	(UL(1) << 47)
+#define HCR_FWB		(UL(1) << 46)
+#define HCR_NV2		(UL(1) << 45)
+#define HCR_AT		(UL(1) << 44)
+#define HCR_NV1		(UL(1) << 43)
+#define HCR_NV		(UL(1) << 42)
+#define HCR_API		(UL(1) << 41)
+#define HCR_APK		(UL(1) << 40)
+#define HCR_TEA		(UL(1) << 37)
+#define HCR_TERR	(UL(1) << 36)
+#define HCR_TLOR	(UL(1) << 35)
+#define HCR_E2H		(UL(1) << 34)
+#define HCR_ID		(UL(1) << 33)
+#define HCR_CD		(UL(1) << 32)
+#define HCR_RW_SHIFT	31
+#define HCR_RW		(UL(1) << HCR_RW_SHIFT)
+#define HCR_TRVM	(UL(1) << 30)
+#define HCR_HCD		(UL(1) << 29)
+#define HCR_TDZ		(UL(1) << 28)
+#define HCR_TGE		(UL(1) << 27)
+#define HCR_TVM		(UL(1) << 26)
+#define HCR_TTLB	(UL(1) << 25)
+#define HCR_TPU		(UL(1) << 24)
+#define HCR_TPC		(UL(1) << 23) /* HCR_TPCP if FEAT_DPB */
+#define HCR_TSW		(UL(1) << 22)
+#define HCR_TACR	(UL(1) << 21)
+#define HCR_TIDCP	(UL(1) << 20)
+#define HCR_TSC		(UL(1) << 19)
+#define HCR_TID3	(UL(1) << 18)
+#define HCR_TID2	(UL(1) << 17)
+#define HCR_TID1	(UL(1) << 16)
+#define HCR_TID0	(UL(1) << 15)
+#define HCR_TWE		(UL(1) << 14)
+#define HCR_TWI		(UL(1) << 13)
+#define HCR_DC		(UL(1) << 12)
+#define HCR_BSU		(3 << 10)
+#define HCR_BSU_IS	(UL(1) << 10)
+#define HCR_FB		(UL(1) << 9)
+#define HCR_VSE		(UL(1) << 8)
+#define HCR_VI		(UL(1) << 7)
+#define HCR_VF		(UL(1) << 6)
+#define HCR_AMO		(UL(1) << 5)
+#define HCR_IMO		(UL(1) << 4)
+#define HCR_FMO		(UL(1) << 3)
+#define HCR_PTW		(UL(1) << 2)
+#define HCR_SWIO	(UL(1) << 1)
+#define HCR_VM		(UL(1) << 0)
+#define HCR_RES0	((UL(1) << 48) | (UL(1) << 39))
+
+/*
+ * The bits we set in HCR:
+ * TLOR:	Trap LORegion register accesses
+ * RW:		64bit by default, can be overridden for 32bit VMs
+ * TACR:	Trap ACTLR
+ * TSC:		Trap SMC
+ * TSW:		Trap cache operations by set/way
+ * TWE:		Trap WFE
+ * TWI:		Trap WFI
+ * TIDCP:	Trap L2CTLR/L2ECTLR
+ * BSU_IS:	Upgrade barriers to the inner shareable domain
+ * FB:		Force broadcast of all maintenance operations
+ * AMO:		Override CPSR.A and enable signaling with VA
+ * IMO:		Override CPSR.I and enable signaling with VI
+ * FMO:		Override CPSR.F and enable signaling with VF
+ * SWIO:	Turn set/way invalidates into set/way clean+invalidate
+ * PTW:		Take a stage2 fault if a stage1 walk steps in device memory
+ * TID3:	Trap EL1 reads of group 3 ID registers
+ * TID2:	Trap CTR_EL0, CCSIDR2_EL1, CLIDR_EL1, and CSSELR_EL1
+ */
+#define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
+			 HCR_BSU_IS | HCR_FB | HCR_TACR | \
+			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
+			 HCR_FMO | HCR_IMO | HCR_PTW | HCR_TID3)
+#define HCR_HOST_NVHE_FLAGS (HCR_RW | HCR_API | HCR_APK | HCR_ATA)
+#define HCR_HOST_NVHE_PROTECTED_FLAGS (HCR_HOST_NVHE_FLAGS | HCR_TSC)
+#define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
+
+#define HCRX_GUEST_FLAGS (HCRX_EL2_SMPME | HCRX_EL2_TCR2En)
+#define HCRX_HOST_FLAGS (HCRX_EL2_MSCEn | HCRX_EL2_TCR2En)
+
+/* TCR_EL2 Registers bits */
+#define TCR_EL2_RES1		((1U << 31) | (1 << 23))
+#define TCR_EL2_TBI		(1 << 20)
+#define TCR_EL2_PS_SHIFT	16
+#define TCR_EL2_PS_MASK		(7 << TCR_EL2_PS_SHIFT)
+#define TCR_EL2_PS_40B		(2 << TCR_EL2_PS_SHIFT)
+#define TCR_EL2_TG0_MASK	TCR_TG0_MASK
+#define TCR_EL2_SH0_MASK	TCR_SH0_MASK
+#define TCR_EL2_ORGN0_MASK	TCR_ORGN0_MASK
+#define TCR_EL2_IRGN0_MASK	TCR_IRGN0_MASK
+#define TCR_EL2_T0SZ_MASK	0x3f
+#define TCR_EL2_MASK	(TCR_EL2_TG0_MASK | TCR_EL2_SH0_MASK | \
+			 TCR_EL2_ORGN0_MASK | TCR_EL2_IRGN0_MASK | TCR_EL2_T0SZ_MASK)
+
+/* VTCR_EL2 Registers bits */
+#define VTCR_EL2_RES1		(1U << 31)
+#define VTCR_EL2_HD		(1 << 22)
+#define VTCR_EL2_HA		(1 << 21)
+#define VTCR_EL2_PS_SHIFT	TCR_EL2_PS_SHIFT
+#define VTCR_EL2_PS_MASK	TCR_EL2_PS_MASK
+#define VTCR_EL2_TG0_MASK	TCR_TG0_MASK
+#define VTCR_EL2_TG0_4K		TCR_TG0_4K
+#define VTCR_EL2_TG0_16K	TCR_TG0_16K
+#define VTCR_EL2_TG0_64K	TCR_TG0_64K
+#define VTCR_EL2_SH0_MASK	TCR_SH0_MASK
+#define VTCR_EL2_SH0_INNER	TCR_SH0_INNER
+#define VTCR_EL2_ORGN0_MASK	TCR_ORGN0_MASK
+#define VTCR_EL2_ORGN0_WBWA	TCR_ORGN0_WBWA
+#define VTCR_EL2_IRGN0_MASK	TCR_IRGN0_MASK
+#define VTCR_EL2_IRGN0_WBWA	TCR_IRGN0_WBWA
+#define VTCR_EL2_SL0_SHIFT	6
+#define VTCR_EL2_SL0_MASK	(3 << VTCR_EL2_SL0_SHIFT)
+#define VTCR_EL2_T0SZ_MASK	0x3f
+#define VTCR_EL2_VS_SHIFT	19
+#define VTCR_EL2_VS_8BIT	(0 << VTCR_EL2_VS_SHIFT)
+#define VTCR_EL2_VS_16BIT	(1 << VTCR_EL2_VS_SHIFT)
+
+#define VTCR_EL2_T0SZ(x)	TCR_T0SZ(x)
+
+/*
+ * We configure the Stage-2 page tables to always restrict the IPA space to be
+ * 40 bits wide (T0SZ = 24).  Systems with a PARange smaller than 40 bits are
+ * not known to exist and will break with this configuration.
+ *
+ * The VTCR_EL2 is configured per VM and is initialised in kvm_init_stage2_mmu.
+ *
+ * Note that when using 4K pages, we concatenate two first level page tables
+ * together. With 16K pages, we concatenate 16 first level page tables.
+ *
+ */
+
+#define VTCR_EL2_COMMON_BITS	(VTCR_EL2_SH0_INNER | VTCR_EL2_ORGN0_WBWA | \
+				 VTCR_EL2_IRGN0_WBWA | VTCR_EL2_RES1)
+
+/*
+ * VTCR_EL2:SL0 indicates the entry level for Stage2 translation.
+ * Interestingly, it depends on the page size.
+ * See D.10.2.121, VTCR_EL2, in ARM DDI 0487C.a
+ *
+ *	-----------------------------------------
+ *	| Entry level		|  4K  | 16K/64K |
+ *	------------------------------------------
+ *	| Level: 0		|  2   |   -     |
+ *	------------------------------------------
+ *	| Level: 1		|  1   |   2     |
+ *	------------------------------------------
+ *	| Level: 2		|  0   |   1     |
+ *	------------------------------------------
+ *	| Level: 3		|  -   |   0     |
+ *	------------------------------------------
+ *
+ * The table roughly translates to :
+ *
+ *	SL0(PAGE_SIZE, Entry_level) = TGRAN_SL0_BASE - Entry_Level
+ *
+ * Where TGRAN_SL0_BASE is a magic number depending on the page size:
+ * 	TGRAN_SL0_BASE(4K) = 2
+ *	TGRAN_SL0_BASE(16K) = 3
+ *	TGRAN_SL0_BASE(64K) = 3
+ * provided we take care of ruling out the unsupported cases and
+ * Entry_Level = 4 - Number_of_levels.
+ *
+ */
+#ifdef CONFIG_ARM64_64K_PAGES
+
+#define VTCR_EL2_TGRAN			VTCR_EL2_TG0_64K
+#define VTCR_EL2_TGRAN_SL0_BASE		3UL
+
+#elif defined(CONFIG_ARM64_16K_PAGES)
+
+#define VTCR_EL2_TGRAN			VTCR_EL2_TG0_16K
+#define VTCR_EL2_TGRAN_SL0_BASE		3UL
+
+#else	/* 4K */
+
+#define VTCR_EL2_TGRAN			VTCR_EL2_TG0_4K
+#define VTCR_EL2_TGRAN_SL0_BASE		2UL
+
+#endif
+
+#define VTCR_EL2_LVLS_TO_SL0(levels)	\
+	((VTCR_EL2_TGRAN_SL0_BASE - (4 - (levels))) << VTCR_EL2_SL0_SHIFT)
+#define VTCR_EL2_SL0_TO_LVLS(sl0)	\
+	((sl0) + 4 - VTCR_EL2_TGRAN_SL0_BASE)
+#define VTCR_EL2_LVLS(vtcr)		\
+	VTCR_EL2_SL0_TO_LVLS(((vtcr) & VTCR_EL2_SL0_MASK) >> VTCR_EL2_SL0_SHIFT)
+
+#define VTCR_EL2_FLAGS			(VTCR_EL2_COMMON_BITS | VTCR_EL2_TGRAN)
+#define VTCR_EL2_IPA(vtcr)		(64 - ((vtcr) & VTCR_EL2_T0SZ_MASK))
+
+/*
+ * ARM VMSAv8-64 defines an algorithm for finding the translation table
+ * descriptors in section D4.2.8 in ARM DDI 0487C.a.
+ *
+ * The algorithm defines the expectations on the translation table
+ * addresses for each level, based on PAGE_SIZE, entry level
+ * and the translation table size (T0SZ). The variable "x" in the
+ * algorithm determines the alignment of a table base address at a given
+ * level and thus determines the alignment of VTTBR:BADDR for stage2
+ * page table entry level.
+ * Since the number of bits resolved at the entry level could vary
+ * depending on the T0SZ, the value of "x" is defined based on a
+ * Magic constant for a given PAGE_SIZE and Entry Level. The
+ * intermediate levels must be always aligned to the PAGE_SIZE (i.e,
+ * x = PAGE_SHIFT).
+ *
+ * The value of "x" for entry level is calculated as :
+ *    x = Magic_N - T0SZ
+ *
+ * where Magic_N is an integer depending on the page size and the entry
+ * level of the page table as below:
+ *
+ *	--------------------------------------------
+ *	| Entry level		|  4K    16K   64K |
+ *	--------------------------------------------
+ *	| Level: 0 (4 levels)	| 28   |  -  |  -  |
+ *	--------------------------------------------
+ *	| Level: 1 (3 levels)	| 37   | 31  | 25  |
+ *	--------------------------------------------
+ *	| Level: 2 (2 levels)	| 46   | 42  | 38  |
+ *	--------------------------------------------
+ *	| Level: 3 (1 level)	| -    | 53  | 51  |
+ *	--------------------------------------------
+ *
+ * We have a magic formula for the Magic_N below:
+ *
+ *  Magic_N(PAGE_SIZE, Level) = 64 - ((PAGE_SHIFT - 3) * Number_of_levels)
+ *
+ * where Number_of_levels = (4 - Level). We are only interested in the
+ * value for Entry_Level for the stage2 page table.
+ *
+ * So, given that T0SZ = (64 - IPA_SHIFT), we can compute 'x' as follows:
+ *
+ *	x = (64 - ((PAGE_SHIFT - 3) * Number_of_levels)) - (64 - IPA_SHIFT)
+ *	  = IPA_SHIFT - ((PAGE_SHIFT - 3) * Number of levels)
+ *
+ * Here is one way to explain the Magic Formula:
+ *
+ *  x = log2(Size_of_Entry_Level_Table)
+ *
+ * Since, we can resolve (PAGE_SHIFT - 3) bits at each level, and another
+ * PAGE_SHIFT bits in the PTE, we have :
+ *
+ *  Bits_Entry_level = IPA_SHIFT - ((PAGE_SHIFT - 3) * (n - 1) + PAGE_SHIFT)
+ *		     = IPA_SHIFT - (PAGE_SHIFT - 3) * n - 3
+ *  where n = number of levels, and since each pointer is 8bytes, we have:
+ *
+ *  x = Bits_Entry_Level + 3
+ *    = IPA_SHIFT - (PAGE_SHIFT - 3) * n
+ *
+ * The only constraint here is that, we have to find the number of page table
+ * levels for a given IPA size (which we do, see stage2_pt_levels())
+ */
+#define ARM64_VTTBR_X(ipa, levels)	((ipa) - ((levels) * (PAGE_SHIFT - 3)))
+
+#define VTTBR_CNP_BIT     (UL(1))
+#define VTTBR_VMID_SHIFT  (UL(48))
+#define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
+
+/* Hyp System Trap Register */
+#define HSTR_EL2_T(x)	(1 << x)
+
+/* Hyp Coprocessor Trap Register Shifts */
+#define CPTR_EL2_TFP_SHIFT 10
+
+/* Hyp Coprocessor Trap Register */
+#define CPTR_EL2_TCPAC	(1U << 31)
+#define CPTR_EL2_TAM	(1 << 30)
+#define CPTR_EL2_TTA	(1 << 20)
+#define CPTR_EL2_TSM	(1 << 12)
+#define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
+#define CPTR_EL2_TZ	(1 << 8)
+#define CPTR_NVHE_EL2_RES1	0x000032ff /* known RES1 bits in CPTR_EL2 (nVHE) */
+#define CPTR_NVHE_EL2_RES0	(GENMASK(63, 32) |	\
+				 GENMASK(29, 21) |	\
+				 GENMASK(19, 14) |	\
+				 BIT(11))
+
+/* Hyp Debug Configuration Register bits */
+#define MDCR_EL2_E2TB_MASK	(UL(0x3))
+#define MDCR_EL2_E2TB_SHIFT	(UL(24))
+#define MDCR_EL2_HPMFZS		(UL(1) << 36)
+#define MDCR_EL2_HPMFZO		(UL(1) << 29)
+#define MDCR_EL2_MTPME		(UL(1) << 28)
+#define MDCR_EL2_TDCC		(UL(1) << 27)
+#define MDCR_EL2_HLP		(UL(1) << 26)
+#define MDCR_EL2_HCCD		(UL(1) << 23)
+#define MDCR_EL2_TTRF		(UL(1) << 19)
+#define MDCR_EL2_HPMD		(UL(1) << 17)
+#define MDCR_EL2_TPMS		(UL(1) << 14)
+#define MDCR_EL2_E2PB_MASK	(UL(0x3))
+#define MDCR_EL2_E2PB_SHIFT	(UL(12))
+#define MDCR_EL2_TDRA		(UL(1) << 11)
+#define MDCR_EL2_TDOSA		(UL(1) << 10)
+#define MDCR_EL2_TDA		(UL(1) << 9)
+#define MDCR_EL2_TDE		(UL(1) << 8)
+#define MDCR_EL2_HPME		(UL(1) << 7)
+#define MDCR_EL2_TPM		(UL(1) << 6)
+#define MDCR_EL2_TPMCR		(UL(1) << 5)
+#define MDCR_EL2_HPMN_MASK	(UL(0x1F))
+#define MDCR_EL2_RES0		(GENMASK(63, 37) |	\
+				 GENMASK(35, 30) |	\
+				 GENMASK(25, 24) |	\
+				 GENMASK(22, 20) |	\
+				 BIT(18) |		\
+				 GENMASK(16, 15))
+
+/*
+ * FGT register definitions
+ *
+ * RES0 and polarity masks as of DDI0487J.a, to be updated as needed.
+ * We're not using the generated masks as they are usually ahead of
+ * the published ARM ARM, which we use as a reference.
+ *
+ * Once we get to a point where the two describe the same thing, we'll
+ * merge the definitions. One day.
+ */
+#define __HFGRTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51))
+#define __HFGRTR_EL2_MASK	GENMASK(49, 0)
+#define __HFGRTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
+
+#define __HFGWTR_EL2_RES0	(GENMASK(63, 56) | GENMASK(53, 51) |	\
+				 BIT(46) | BIT(42) | BIT(40) | BIT(28) | \
+				 GENMASK(26, 25) | BIT(21) | BIT(18) |	\
+				 GENMASK(15, 14) | GENMASK(10, 9) | BIT(2))
+#define __HFGWTR_EL2_MASK	GENMASK(49, 0)
+#define __HFGWTR_EL2_nMASK	(GENMASK(58, 57) | GENMASK(55, 54) | BIT(50))
+
+#define __HFGITR_EL2_RES0	GENMASK(63, 57)
+#define __HFGITR_EL2_MASK	GENMASK(54, 0)
+#define __HFGITR_EL2_nMASK	GENMASK(56, 55)
+
+#define __HDFGRTR_EL2_RES0	(BIT(49) | BIT(42) | GENMASK(39, 38) |	\
+				 GENMASK(21, 20) | BIT(8))
+#define __HDFGRTR_EL2_MASK	~__HDFGRTR_EL2_nMASK
+#define __HDFGRTR_EL2_nMASK	GENMASK(62, 59)
+
+#define __HDFGWTR_EL2_RES0	(BIT(63) | GENMASK(59, 58) | BIT(51) | BIT(47) | \
+				 BIT(43) | GENMASK(40, 38) | BIT(34) | BIT(30) | \
+				 BIT(22) | BIT(9) | BIT(6))
+#define __HDFGWTR_EL2_MASK	~__HDFGWTR_EL2_nMASK
+#define __HDFGWTR_EL2_nMASK	GENMASK(62, 60)
+
+/* Similar definitions for HCRX_EL2 */
+#define __HCRX_EL2_RES0		(GENMASK(63, 16) | GENMASK(13, 12))
+#define __HCRX_EL2_MASK		(0)
+#define __HCRX_EL2_nMASK	(GENMASK(15, 14) | GENMASK(4, 0))
+
+/* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
+#define HPFAR_MASK	(~UL(0xf))
+/*
+ * We have
+ *	PAR	[PA_Shift - 1	: 12] = PA	[PA_Shift - 1 : 12]
+ *	HPFAR	[PA_Shift - 9	: 4]  = FIPA	[PA_Shift - 1 : 12]
+ *
+ * Always assume 52 bit PA since at this point, we don't know how many PA bits
+ * the page table has been set up for. This should be safe since unused address
+ * bits in PAR are res0.
+ */
+#define PAR_TO_HPFAR(par)		\
+	(((par) & GENMASK_ULL(52 - 1, 12)) >> 8)
+
+#define ECN(x) { ESR_ELx_EC_##x, #x }
+
+#define kvm_arm_exception_class \
+	ECN(UNKNOWN), ECN(WFx), ECN(CP15_32), ECN(CP15_64), ECN(CP14_MR), \
+	ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(PAC), ECN(CP14_64), \
+	ECN(SVC64), ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(SVE), \
+	ECN(IMP_DEF), ECN(IABT_LOW), ECN(IABT_CUR), \
+	ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \
+	ECN(SP_ALIGN), ECN(FP_EXC32), ECN(FP_EXC64), ECN(SERROR), \
+	ECN(BREAKPT_LOW), ECN(BREAKPT_CUR), ECN(SOFTSTP_LOW), \
+	ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \
+	ECN(BKPT32), ECN(VECTOR32), ECN(BRK64), ECN(ERET)
+
+#define CPACR_EL1_TTA		(1 << 28)
+
+#define kvm_mode_names				\
+	{ PSR_MODE_EL0t,	"EL0t" },	\
+	{ PSR_MODE_EL1t,	"EL1t" },	\
+	{ PSR_MODE_EL1h,	"EL1h" },	\
+	{ PSR_MODE_EL2t,	"EL2t" },	\
+	{ PSR_MODE_EL2h,	"EL2h" },	\
+	{ PSR_MODE_EL3t,	"EL3t" },	\
+	{ PSR_MODE_EL3h,	"EL3h" },	\
+	{ PSR_AA32_MODE_USR,	"32-bit USR" },	\
+	{ PSR_AA32_MODE_FIQ,	"32-bit FIQ" },	\
+	{ PSR_AA32_MODE_IRQ,	"32-bit IRQ" },	\
+	{ PSR_AA32_MODE_SVC,	"32-bit SVC" },	\
+	{ PSR_AA32_MODE_ABT,	"32-bit ABT" },	\
+	{ PSR_AA32_MODE_HYP,	"32-bit HYP" },	\
+	{ PSR_AA32_MODE_UND,	"32-bit UND" },	\
+	{ PSR_AA32_MODE_SYS,	"32-bit SYS" }
+
+#endif /* __ARM64_KVM_ARM_H__ */
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
new file mode 100644
index 000000000..24b5e6b23
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -0,0 +1,375 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM_KVM_ASM_H__
+#define __ARM_KVM_ASM_H__
+
+#include <asm/hyp_image.h>
+#include <asm/insn.h>
+#include <asm/virt.h>
+
+#define ARM_EXIT_WITH_SERROR_BIT  31
+#define ARM_EXCEPTION_CODE(x)	  ((x) & ~(1U << ARM_EXIT_WITH_SERROR_BIT))
+#define ARM_EXCEPTION_IS_TRAP(x)  (ARM_EXCEPTION_CODE((x)) == ARM_EXCEPTION_TRAP)
+#define ARM_SERROR_PENDING(x)	  !!((x) & (1U << ARM_EXIT_WITH_SERROR_BIT))
+
+#define ARM_EXCEPTION_IRQ	  0
+#define ARM_EXCEPTION_EL1_SERROR  1
+#define ARM_EXCEPTION_TRAP	  2
+#define ARM_EXCEPTION_IL	  3
+/* The hyp-stub will return this for any kvm_call_hyp() call */
+#define ARM_EXCEPTION_HYP_GONE	  HVC_STUB_ERR
+
+#define kvm_arm_exception_type					\
+	{ARM_EXCEPTION_IRQ,		"IRQ"		},	\
+	{ARM_EXCEPTION_EL1_SERROR, 	"SERROR"	},	\
+	{ARM_EXCEPTION_TRAP, 		"TRAP"		},	\
+	{ARM_EXCEPTION_HYP_GONE,	"HYP_GONE"	}
+
+/*
+ * Size of the HYP vectors preamble. kvm_patch_vector_branch() generates code
+ * that jumps over this.
+ */
+#define KVM_VECTOR_PREAMBLE	(2 * AARCH64_INSN_SIZE)
+
+#define KVM_HOST_SMCCC_ID(id)						\
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL,				\
+			   ARM_SMCCC_SMC_64,				\
+			   ARM_SMCCC_OWNER_VENDOR_HYP,			\
+			   (id))
+
+#define KVM_HOST_SMCCC_FUNC(name) KVM_HOST_SMCCC_ID(__KVM_HOST_SMCCC_FUNC_##name)
+
+#define __KVM_HOST_SMCCC_FUNC___kvm_hyp_init			0
+
+#ifndef __ASSEMBLY__
+
+#include <linux/mm.h>
+
+enum __kvm_host_smccc_func {
+	/* Hypercalls available only prior to pKVM finalisation */
+	/* __KVM_HOST_SMCCC_FUNC___kvm_hyp_init */
+	__KVM_HOST_SMCCC_FUNC___kvm_get_mdcr_el2 = __KVM_HOST_SMCCC_FUNC___kvm_hyp_init + 1,
+	__KVM_HOST_SMCCC_FUNC___pkvm_init,
+	__KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping,
+	__KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector,
+	__KVM_HOST_SMCCC_FUNC___kvm_enable_ssbs,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_init_lrs,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_get_gic_config,
+	__KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize,
+
+	/* Hypercalls available after pKVM finalisation */
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp,
+	__KVM_HOST_SMCCC_FUNC___pkvm_host_unshare_hyp,
+	__KVM_HOST_SMCCC_FUNC___kvm_adjust_pc,
+	__KVM_HOST_SMCCC_FUNC___kvm_vcpu_run,
+	__KVM_HOST_SMCCC_FUNC___kvm_flush_vm_context,
+	__KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_ipa,
+	__KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_ipa_nsh,
+	__KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid,
+	__KVM_HOST_SMCCC_FUNC___kvm_tlb_flush_vmid_range,
+	__KVM_HOST_SMCCC_FUNC___kvm_flush_cpu_context,
+	__KVM_HOST_SMCCC_FUNC___kvm_timer_set_cntvoff,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_read_vmcr,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_write_vmcr,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs,
+	__KVM_HOST_SMCCC_FUNC___vgic_v3_restore_aprs,
+	__KVM_HOST_SMCCC_FUNC___pkvm_vcpu_init_traps,
+	__KVM_HOST_SMCCC_FUNC___pkvm_init_vm,
+	__KVM_HOST_SMCCC_FUNC___pkvm_init_vcpu,
+	__KVM_HOST_SMCCC_FUNC___pkvm_teardown_vm,
+};
+
+#define DECLARE_KVM_VHE_SYM(sym)	extern char sym[]
+#define DECLARE_KVM_NVHE_SYM(sym)	extern char kvm_nvhe_sym(sym)[]
+
+/*
+ * Define a pair of symbols sharing the same name but one defined in
+ * VHE and the other in nVHE hyp implementations.
+ */
+#define DECLARE_KVM_HYP_SYM(sym)		\
+	DECLARE_KVM_VHE_SYM(sym);		\
+	DECLARE_KVM_NVHE_SYM(sym)
+
+#define DECLARE_KVM_VHE_PER_CPU(type, sym)	\
+	DECLARE_PER_CPU(type, sym)
+#define DECLARE_KVM_NVHE_PER_CPU(type, sym)	\
+	DECLARE_PER_CPU(type, kvm_nvhe_sym(sym))
+
+#define DECLARE_KVM_HYP_PER_CPU(type, sym)	\
+	DECLARE_KVM_VHE_PER_CPU(type, sym);	\
+	DECLARE_KVM_NVHE_PER_CPU(type, sym)
+
+/*
+ * Compute pointer to a symbol defined in nVHE percpu region.
+ * Returns NULL if percpu memory has not been allocated yet.
+ */
+#define this_cpu_ptr_nvhe_sym(sym)	per_cpu_ptr_nvhe_sym(sym, smp_processor_id())
+#define per_cpu_ptr_nvhe_sym(sym, cpu)						\
+	({									\
+		unsigned long base, off;					\
+		base = kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu];		\
+		off = (unsigned long)&CHOOSE_NVHE_SYM(sym) -			\
+		      (unsigned long)&CHOOSE_NVHE_SYM(__per_cpu_start);		\
+		base ? (typeof(CHOOSE_NVHE_SYM(sym))*)(base + off) : NULL;	\
+	})
+
+#if defined(__KVM_NVHE_HYPERVISOR__)
+
+#define CHOOSE_NVHE_SYM(sym)	sym
+#define CHOOSE_HYP_SYM(sym)	CHOOSE_NVHE_SYM(sym)
+
+/* The nVHE hypervisor shouldn't even try to access VHE symbols */
+extern void *__nvhe_undefined_symbol;
+#define CHOOSE_VHE_SYM(sym)		__nvhe_undefined_symbol
+#define this_cpu_ptr_hyp_sym(sym)	(&__nvhe_undefined_symbol)
+#define per_cpu_ptr_hyp_sym(sym, cpu)	(&__nvhe_undefined_symbol)
+
+#elif defined(__KVM_VHE_HYPERVISOR__)
+
+#define CHOOSE_VHE_SYM(sym)	sym
+#define CHOOSE_HYP_SYM(sym)	CHOOSE_VHE_SYM(sym)
+
+/* The VHE hypervisor shouldn't even try to access nVHE symbols */
+extern void *__vhe_undefined_symbol;
+#define CHOOSE_NVHE_SYM(sym)		__vhe_undefined_symbol
+#define this_cpu_ptr_hyp_sym(sym)	(&__vhe_undefined_symbol)
+#define per_cpu_ptr_hyp_sym(sym, cpu)	(&__vhe_undefined_symbol)
+
+#else
+
+/*
+ * BIG FAT WARNINGS:
+ *
+ * - Don't be tempted to change the following is_kernel_in_hyp_mode()
+ *   to has_vhe(). has_vhe() is implemented as a *final* capability,
+ *   while this is used early at boot time, when the capabilities are
+ *   not final yet....
+ *
+ * - Don't let the nVHE hypervisor have access to this, as it will
+ *   pick the *wrong* symbol (yes, it runs at EL2...).
+ */
+#define CHOOSE_HYP_SYM(sym)		(is_kernel_in_hyp_mode()	\
+					   ? CHOOSE_VHE_SYM(sym)	\
+					   : CHOOSE_NVHE_SYM(sym))
+
+#define this_cpu_ptr_hyp_sym(sym)	(is_kernel_in_hyp_mode()	\
+					   ? this_cpu_ptr(&sym)		\
+					   : this_cpu_ptr_nvhe_sym(sym))
+
+#define per_cpu_ptr_hyp_sym(sym, cpu)	(is_kernel_in_hyp_mode()	\
+					   ? per_cpu_ptr(&sym, cpu)	\
+					   : per_cpu_ptr_nvhe_sym(sym, cpu))
+
+#define CHOOSE_VHE_SYM(sym)	sym
+#define CHOOSE_NVHE_SYM(sym)	kvm_nvhe_sym(sym)
+
+#endif
+
+struct kvm_nvhe_init_params {
+	unsigned long mair_el2;
+	unsigned long tcr_el2;
+	unsigned long tpidr_el2;
+	unsigned long stack_hyp_va;
+	unsigned long stack_pa;
+	phys_addr_t pgd_pa;
+	unsigned long hcr_el2;
+	unsigned long vttbr;
+	unsigned long vtcr;
+};
+
+/*
+ * Used by the host in EL1 to dump the nVHE hypervisor backtrace on
+ * hyp_panic() in non-protected mode.
+ *
+ * @stack_base:                 hyp VA of the hyp_stack base.
+ * @overflow_stack_base:        hyp VA of the hyp_overflow_stack base.
+ * @fp:                         hyp FP where the backtrace begins.
+ * @pc:                         hyp PC where the backtrace begins.
+ */
+struct kvm_nvhe_stacktrace_info {
+	unsigned long stack_base;
+	unsigned long overflow_stack_base;
+	unsigned long fp;
+	unsigned long pc;
+};
+
+/* Translate a kernel address @ptr into its equivalent linear mapping */
+#define kvm_ksym_ref(ptr)						\
+	({								\
+		void *val = (ptr);					\
+		if (!is_kernel_in_hyp_mode())				\
+			val = lm_alias((ptr));				\
+		val;							\
+	 })
+#define kvm_ksym_ref_nvhe(sym)	kvm_ksym_ref(kvm_nvhe_sym(sym))
+
+struct kvm;
+struct kvm_vcpu;
+struct kvm_s2_mmu;
+
+DECLARE_KVM_NVHE_SYM(__kvm_hyp_init);
+DECLARE_KVM_HYP_SYM(__kvm_hyp_vector);
+#define __kvm_hyp_init		CHOOSE_NVHE_SYM(__kvm_hyp_init)
+#define __kvm_hyp_vector	CHOOSE_HYP_SYM(__kvm_hyp_vector)
+
+extern unsigned long kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[];
+DECLARE_KVM_NVHE_SYM(__per_cpu_start);
+DECLARE_KVM_NVHE_SYM(__per_cpu_end);
+
+DECLARE_KVM_HYP_SYM(__bp_harden_hyp_vecs);
+#define __bp_harden_hyp_vecs	CHOOSE_HYP_SYM(__bp_harden_hyp_vecs)
+
+extern void __kvm_flush_vm_context(void);
+extern void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu);
+extern void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu, phys_addr_t ipa,
+				     int level);
+extern void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu,
+					 phys_addr_t ipa,
+					 int level);
+extern void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
+					phys_addr_t start, unsigned long pages);
+extern void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu);
+
+extern void __kvm_timer_set_cntvoff(u64 cntvoff);
+
+extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+
+extern void __kvm_adjust_pc(struct kvm_vcpu *vcpu);
+
+extern u64 __vgic_v3_get_gic_config(void);
+extern u64 __vgic_v3_read_vmcr(void);
+extern void __vgic_v3_write_vmcr(u32 vmcr);
+extern void __vgic_v3_init_lrs(void);
+
+extern u64 __kvm_get_mdcr_el2(void);
+
+#define __KVM_EXTABLE(from, to)						\
+	"	.pushsection	__kvm_ex_table, \"a\"\n"		\
+	"	.align		3\n"					\
+	"	.long		(" #from " - .), (" #to " - .)\n"	\
+	"	.popsection\n"
+
+
+#define __kvm_at(at_op, addr)						\
+( { 									\
+	int __kvm_at_err = 0;						\
+	u64 spsr, elr;							\
+	asm volatile(							\
+	"	mrs	%1, spsr_el2\n"					\
+	"	mrs	%2, elr_el2\n"					\
+	"1:	at	"at_op", %3\n"					\
+	"	isb\n"							\
+	"	b	9f\n"						\
+	"2:	msr	spsr_el2, %1\n"					\
+	"	msr	elr_el2, %2\n"					\
+	"	mov	%w0, %4\n"					\
+	"9:\n"								\
+	__KVM_EXTABLE(1b, 2b)						\
+	: "+r" (__kvm_at_err), "=&r" (spsr), "=&r" (elr)		\
+	: "r" (addr), "i" (-EFAULT));					\
+	__kvm_at_err;							\
+} )
+
+void __noreturn hyp_panic(void);
+asmlinkage void kvm_unexpected_el2_exception(void);
+asmlinkage void __noreturn hyp_panic(void);
+asmlinkage void __noreturn hyp_panic_bad_stack(void);
+asmlinkage void kvm_unexpected_el2_exception(void);
+struct kvm_cpu_context;
+void handle_trap(struct kvm_cpu_context *host_ctxt);
+asmlinkage void __noreturn __kvm_host_psci_cpu_entry(bool is_cpu_on);
+void __noreturn __pkvm_init_finalise(void);
+void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc);
+void kvm_patch_vector_branch(struct alt_instr *alt,
+	__le32 *origptr, __le32 *updptr, int nr_inst);
+void kvm_get_kimage_voffset(struct alt_instr *alt,
+	__le32 *origptr, __le32 *updptr, int nr_inst);
+void kvm_compute_final_ctr_el0(struct alt_instr *alt,
+	__le32 *origptr, __le32 *updptr, int nr_inst);
+void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr_virt,
+	u64 elr_phys, u64 par, uintptr_t vcpu, u64 far, u64 hpfar);
+
+#else /* __ASSEMBLY__ */
+
+.macro get_host_ctxt reg, tmp
+	adr_this_cpu \reg, kvm_host_data, \tmp
+	add	\reg, \reg, #HOST_DATA_CONTEXT
+.endm
+
+.macro get_vcpu_ptr vcpu, ctxt
+	get_host_ctxt \ctxt, \vcpu
+	ldr	\vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
+.endm
+
+.macro get_loaded_vcpu vcpu, ctxt
+	adr_this_cpu \ctxt, kvm_hyp_ctxt, \vcpu
+	ldr	\vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
+.endm
+
+.macro set_loaded_vcpu vcpu, ctxt, tmp
+	adr_this_cpu \ctxt, kvm_hyp_ctxt, \tmp
+	str	\vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
+.endm
+
+/*
+ * KVM extable for unexpected exceptions.
+ * Create a struct kvm_exception_table_entry output to a section that can be
+ * mapped by EL2. The table is not sorted.
+ *
+ * The caller must ensure:
+ * x18 has the hypervisor value to allow any Shadow-Call-Stack instrumented
+ * code to write to it, and that SPSR_EL2 and ELR_EL2 are restored by the fixup.
+ */
+.macro	_kvm_extable, from, to
+	.pushsection	__kvm_ex_table, "a"
+	.align		3
+	.long		(\from - .), (\to - .)
+	.popsection
+.endm
+
+#define CPU_XREG_OFFSET(x)	(CPU_USER_PT_REGS + 8*x)
+#define CPU_LR_OFFSET		CPU_XREG_OFFSET(30)
+#define CPU_SP_EL0_OFFSET	(CPU_LR_OFFSET + 8)
+
+/*
+ * We treat x18 as callee-saved as the host may use it as a platform
+ * register (e.g. for shadow call stack).
+ */
+.macro save_callee_saved_regs ctxt
+	str	x18,      [\ctxt, #CPU_XREG_OFFSET(18)]
+	stp	x19, x20, [\ctxt, #CPU_XREG_OFFSET(19)]
+	stp	x21, x22, [\ctxt, #CPU_XREG_OFFSET(21)]
+	stp	x23, x24, [\ctxt, #CPU_XREG_OFFSET(23)]
+	stp	x25, x26, [\ctxt, #CPU_XREG_OFFSET(25)]
+	stp	x27, x28, [\ctxt, #CPU_XREG_OFFSET(27)]
+	stp	x29, lr,  [\ctxt, #CPU_XREG_OFFSET(29)]
+.endm
+
+.macro restore_callee_saved_regs ctxt
+	// We require \ctxt is not x18-x28
+	ldr	x18,      [\ctxt, #CPU_XREG_OFFSET(18)]
+	ldp	x19, x20, [\ctxt, #CPU_XREG_OFFSET(19)]
+	ldp	x21, x22, [\ctxt, #CPU_XREG_OFFSET(21)]
+	ldp	x23, x24, [\ctxt, #CPU_XREG_OFFSET(23)]
+	ldp	x25, x26, [\ctxt, #CPU_XREG_OFFSET(25)]
+	ldp	x27, x28, [\ctxt, #CPU_XREG_OFFSET(27)]
+	ldp	x29, lr,  [\ctxt, #CPU_XREG_OFFSET(29)]
+.endm
+
+.macro save_sp_el0 ctxt, tmp
+	mrs	\tmp,	sp_el0
+	str	\tmp,	[\ctxt, #CPU_SP_EL0_OFFSET]
+.endm
+
+.macro restore_sp_el0 ctxt, tmp
+	ldr	\tmp,	  [\ctxt, #CPU_SP_EL0_OFFSET]
+	msr	sp_el0, \tmp
+.endm
+
+#endif
+
+#endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
new file mode 100644
index 000000000..3d6725ff0
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -0,0 +1,618 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/include/kvm_emulate.h
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#ifndef __ARM64_KVM_EMULATE_H__
+#define __ARM64_KVM_EMULATE_H__
+
+#include <linux/kvm_host.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/esr.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/ptrace.h>
+#include <asm/cputype.h>
+#include <asm/virt.h>
+
+#define CURRENT_EL_SP_EL0_VECTOR	0x0
+#define CURRENT_EL_SP_ELx_VECTOR	0x200
+#define LOWER_EL_AArch64_VECTOR		0x400
+#define LOWER_EL_AArch32_VECTOR		0x600
+
+enum exception_type {
+	except_type_sync	= 0,
+	except_type_irq		= 0x80,
+	except_type_fiq		= 0x100,
+	except_type_serror	= 0x180,
+};
+
+#define kvm_exception_type_names		\
+	{ except_type_sync,	"SYNC"   },	\
+	{ except_type_irq,	"IRQ"    },	\
+	{ except_type_fiq,	"FIQ"    },	\
+	{ except_type_serror,	"SERROR" }
+
+bool kvm_condition_valid32(const struct kvm_vcpu *vcpu);
+void kvm_skip_instr32(struct kvm_vcpu *vcpu);
+
+void kvm_inject_undefined(struct kvm_vcpu *vcpu);
+void kvm_inject_vabt(struct kvm_vcpu *vcpu);
+void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr);
+void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
+void kvm_inject_size_fault(struct kvm_vcpu *vcpu);
+
+void kvm_vcpu_wfi(struct kvm_vcpu *vcpu);
+
+void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu);
+int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2);
+int kvm_inject_nested_irq(struct kvm_vcpu *vcpu);
+
+#if defined(__KVM_VHE_HYPERVISOR__) || defined(__KVM_NVHE_HYPERVISOR__)
+static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
+{
+	return !(vcpu->arch.hcr_el2 & HCR_RW);
+}
+#else
+static __always_inline bool vcpu_el1_is_32bit(struct kvm_vcpu *vcpu)
+{
+	return test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features);
+}
+#endif
+
+static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
+	if (has_vhe() || has_hvhe())
+		vcpu->arch.hcr_el2 |= HCR_E2H;
+	if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) {
+		/* route synchronous external abort exceptions to EL2 */
+		vcpu->arch.hcr_el2 |= HCR_TEA;
+		/* trap error record accesses */
+		vcpu->arch.hcr_el2 |= HCR_TERR;
+	}
+
+	if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) {
+		vcpu->arch.hcr_el2 |= HCR_FWB;
+	} else {
+		/*
+		 * For non-FWB CPUs, we trap VM ops (HCR_EL2.TVM) until M+C
+		 * get set in SCTLR_EL1 such that we can detect when the guest
+		 * MMU gets turned on and do the necessary cache maintenance
+		 * then.
+		 */
+		vcpu->arch.hcr_el2 |= HCR_TVM;
+	}
+
+	if (cpus_have_final_cap(ARM64_HAS_EVT) &&
+	    !cpus_have_final_cap(ARM64_MISMATCHED_CACHE_TYPE))
+		vcpu->arch.hcr_el2 |= HCR_TID4;
+	else
+		vcpu->arch.hcr_el2 |= HCR_TID2;
+
+	if (vcpu_el1_is_32bit(vcpu))
+		vcpu->arch.hcr_el2 &= ~HCR_RW;
+
+	if (kvm_has_mte(vcpu->kvm))
+		vcpu->arch.hcr_el2 |= HCR_ATA;
+}
+
+static inline unsigned long *vcpu_hcr(struct kvm_vcpu *vcpu)
+{
+	return (unsigned long *)&vcpu->arch.hcr_el2;
+}
+
+static inline void vcpu_clear_wfx_traps(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.hcr_el2 &= ~HCR_TWE;
+	if (atomic_read(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vlpi_count) ||
+	    vcpu->kvm->arch.vgic.nassgireq)
+		vcpu->arch.hcr_el2 &= ~HCR_TWI;
+	else
+		vcpu->arch.hcr_el2 |= HCR_TWI;
+}
+
+static inline void vcpu_set_wfx_traps(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.hcr_el2 |= HCR_TWE;
+	vcpu->arch.hcr_el2 |= HCR_TWI;
+}
+
+static inline void vcpu_ptrauth_enable(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.hcr_el2 |= (HCR_API | HCR_APK);
+}
+
+static inline void vcpu_ptrauth_disable(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.hcr_el2 &= ~(HCR_API | HCR_APK);
+}
+
+static inline unsigned long vcpu_get_vsesr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.vsesr_el2;
+}
+
+static inline void vcpu_set_vsesr(struct kvm_vcpu *vcpu, u64 vsesr)
+{
+	vcpu->arch.vsesr_el2 = vsesr;
+}
+
+static __always_inline unsigned long *vcpu_pc(const struct kvm_vcpu *vcpu)
+{
+	return (unsigned long *)&vcpu_gp_regs(vcpu)->pc;
+}
+
+static __always_inline unsigned long *vcpu_cpsr(const struct kvm_vcpu *vcpu)
+{
+	return (unsigned long *)&vcpu_gp_regs(vcpu)->pstate;
+}
+
+static __always_inline bool vcpu_mode_is_32bit(const struct kvm_vcpu *vcpu)
+{
+	return !!(*vcpu_cpsr(vcpu) & PSR_MODE32_BIT);
+}
+
+static __always_inline bool kvm_condition_valid(const struct kvm_vcpu *vcpu)
+{
+	if (vcpu_mode_is_32bit(vcpu))
+		return kvm_condition_valid32(vcpu);
+
+	return true;
+}
+
+static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
+{
+	*vcpu_cpsr(vcpu) |= PSR_AA32_T_BIT;
+}
+
+/*
+ * vcpu_get_reg and vcpu_set_reg should always be passed a register number
+ * coming from a read of ESR_EL2. Otherwise, it may give the wrong result on
+ * AArch32 with banked registers.
+ */
+static __always_inline unsigned long vcpu_get_reg(const struct kvm_vcpu *vcpu,
+					 u8 reg_num)
+{
+	return (reg_num == 31) ? 0 : vcpu_gp_regs(vcpu)->regs[reg_num];
+}
+
+static __always_inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
+				unsigned long val)
+{
+	if (reg_num != 31)
+		vcpu_gp_regs(vcpu)->regs[reg_num] = val;
+}
+
+static inline bool vcpu_is_el2_ctxt(const struct kvm_cpu_context *ctxt)
+{
+	switch (ctxt->regs.pstate & (PSR_MODE32_BIT | PSR_MODE_MASK)) {
+	case PSR_MODE_EL2h:
+	case PSR_MODE_EL2t:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static inline bool vcpu_is_el2(const struct kvm_vcpu *vcpu)
+{
+	return vcpu_is_el2_ctxt(&vcpu->arch.ctxt);
+}
+
+static inline bool __vcpu_el2_e2h_is_set(const struct kvm_cpu_context *ctxt)
+{
+	return ctxt_sys_reg(ctxt, HCR_EL2) & HCR_E2H;
+}
+
+static inline bool vcpu_el2_e2h_is_set(const struct kvm_vcpu *vcpu)
+{
+	return __vcpu_el2_e2h_is_set(&vcpu->arch.ctxt);
+}
+
+static inline bool __vcpu_el2_tge_is_set(const struct kvm_cpu_context *ctxt)
+{
+	return ctxt_sys_reg(ctxt, HCR_EL2) & HCR_TGE;
+}
+
+static inline bool vcpu_el2_tge_is_set(const struct kvm_vcpu *vcpu)
+{
+	return __vcpu_el2_tge_is_set(&vcpu->arch.ctxt);
+}
+
+static inline bool __is_hyp_ctxt(const struct kvm_cpu_context *ctxt)
+{
+	/*
+	 * We are in a hypervisor context if the vcpu mode is EL2 or
+	 * E2H and TGE bits are set. The latter means we are in the user space
+	 * of the VHE kernel. ARMv8.1 ARM describes this as 'InHost'
+	 *
+	 * Note that the HCR_EL2.{E2H,TGE}={0,1} isn't really handled in the
+	 * rest of the KVM code, and will result in a misbehaving guest.
+	 */
+	return vcpu_is_el2_ctxt(ctxt) ||
+		(__vcpu_el2_e2h_is_set(ctxt) && __vcpu_el2_tge_is_set(ctxt)) ||
+		__vcpu_el2_tge_is_set(ctxt);
+}
+
+static inline bool is_hyp_ctxt(const struct kvm_vcpu *vcpu)
+{
+	return __is_hyp_ctxt(&vcpu->arch.ctxt);
+}
+
+/*
+ * The layout of SPSR for an AArch32 state is different when observed from an
+ * AArch64 SPSR_ELx or an AArch32 SPSR_*. This function generates the AArch32
+ * view given an AArch64 view.
+ *
+ * In ARM DDI 0487E.a see:
+ *
+ * - The AArch64 view (SPSR_EL2) in section C5.2.18, page C5-426
+ * - The AArch32 view (SPSR_abt) in section G8.2.126, page G8-6256
+ * - The AArch32 view (SPSR_und) in section G8.2.132, page G8-6280
+ *
+ * Which show the following differences:
+ *
+ * | Bit | AA64 | AA32 | Notes                       |
+ * +-----+------+------+-----------------------------|
+ * | 24  | DIT  | J    | J is RES0 in ARMv8          |
+ * | 21  | SS   | DIT  | SS doesn't exist in AArch32 |
+ *
+ * ... and all other bits are (currently) common.
+ */
+static inline unsigned long host_spsr_to_spsr32(unsigned long spsr)
+{
+	const unsigned long overlap = BIT(24) | BIT(21);
+	unsigned long dit = !!(spsr & PSR_AA32_DIT_BIT);
+
+	spsr &= ~overlap;
+
+	spsr |= dit << 21;
+
+	return spsr;
+}
+
+static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
+{
+	u32 mode;
+
+	if (vcpu_mode_is_32bit(vcpu)) {
+		mode = *vcpu_cpsr(vcpu) & PSR_AA32_MODE_MASK;
+		return mode > PSR_AA32_MODE_USR;
+	}
+
+	mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
+
+	return mode != PSR_MODE_EL0t;
+}
+
+static __always_inline u64 kvm_vcpu_get_esr(const struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.fault.esr_el2;
+}
+
+static __always_inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	if (esr & ESR_ELx_CV)
+		return (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT;
+
+	return -1;
+}
+
+static __always_inline unsigned long kvm_vcpu_get_hfar(const struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.fault.far_el2;
+}
+
+static __always_inline phys_addr_t kvm_vcpu_get_fault_ipa(const struct kvm_vcpu *vcpu)
+{
+	return ((phys_addr_t)vcpu->arch.fault.hpfar_el2 & HPFAR_MASK) << 8;
+}
+
+static inline u64 kvm_vcpu_get_disr(const struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.fault.disr_el1;
+}
+
+static inline u32 kvm_vcpu_hvc_get_imm(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_xVC_IMM_MASK;
+}
+
+static __always_inline bool kvm_vcpu_dabt_isvalid(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_ISV);
+}
+
+static inline unsigned long kvm_vcpu_dabt_iss_nisv_sanitized(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & (ESR_ELx_CM | ESR_ELx_WNR | ESR_ELx_FSC);
+}
+
+static inline bool kvm_vcpu_dabt_issext(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_SSE);
+}
+
+static inline bool kvm_vcpu_dabt_issf(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_SF);
+}
+
+static __always_inline int kvm_vcpu_dabt_get_rd(const struct kvm_vcpu *vcpu)
+{
+	return (kvm_vcpu_get_esr(vcpu) & ESR_ELx_SRT_MASK) >> ESR_ELx_SRT_SHIFT;
+}
+
+static __always_inline bool kvm_vcpu_abt_iss1tw(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_S1PTW);
+}
+
+/* Always check for S1PTW *before* using this. */
+static __always_inline bool kvm_vcpu_dabt_iswrite(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_WNR;
+}
+
+static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_CM);
+}
+
+static __always_inline unsigned int kvm_vcpu_dabt_get_as(const struct kvm_vcpu *vcpu)
+{
+	return 1 << ((kvm_vcpu_get_esr(vcpu) & ESR_ELx_SAS) >> ESR_ELx_SAS_SHIFT);
+}
+
+/* This one is not specific to Data Abort */
+static __always_inline bool kvm_vcpu_trap_il_is32bit(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_esr(vcpu) & ESR_ELx_IL);
+}
+
+static __always_inline u8 kvm_vcpu_trap_get_class(const struct kvm_vcpu *vcpu)
+{
+	return ESR_ELx_EC(kvm_vcpu_get_esr(vcpu));
+}
+
+static inline bool kvm_vcpu_trap_is_iabt(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_IABT_LOW;
+}
+
+static inline bool kvm_vcpu_trap_is_exec_fault(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_trap_is_iabt(vcpu) && !kvm_vcpu_abt_iss1tw(vcpu);
+}
+
+static __always_inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC;
+}
+
+static __always_inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_TYPE;
+}
+
+static __always_inline u8 kvm_vcpu_trap_get_fault_level(const struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_get_esr(vcpu) & ESR_ELx_FSC_LEVEL;
+}
+
+static __always_inline bool kvm_vcpu_abt_issea(const struct kvm_vcpu *vcpu)
+{
+	switch (kvm_vcpu_trap_get_fault(vcpu)) {
+	case ESR_ELx_FSC_EXTABT:
+	case ESR_ELx_FSC_SEA_TTW0:
+	case ESR_ELx_FSC_SEA_TTW1:
+	case ESR_ELx_FSC_SEA_TTW2:
+	case ESR_ELx_FSC_SEA_TTW3:
+	case ESR_ELx_FSC_SECC:
+	case ESR_ELx_FSC_SECC_TTW0:
+	case ESR_ELx_FSC_SECC_TTW1:
+	case ESR_ELx_FSC_SECC_TTW2:
+	case ESR_ELx_FSC_SECC_TTW3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static __always_inline int kvm_vcpu_sys_get_rt(struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	return ESR_ELx_SYS64_ISS_RT(esr);
+}
+
+static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
+{
+	if (kvm_vcpu_abt_iss1tw(vcpu)) {
+		/*
+		 * Only a permission fault on a S1PTW should be
+		 * considered as a write. Otherwise, page tables baked
+		 * in a read-only memslot will result in an exception
+		 * being delivered in the guest.
+		 *
+		 * The drawback is that we end-up faulting twice if the
+		 * guest is using any of HW AF/DB: a translation fault
+		 * to map the page containing the PT (read only at
+		 * first), then a permission fault to allow the flags
+		 * to be set.
+		 */
+		switch (kvm_vcpu_trap_get_fault_type(vcpu)) {
+		case ESR_ELx_FSC_PERM:
+			return true;
+		default:
+			return false;
+		}
+	}
+
+	if (kvm_vcpu_trap_is_iabt(vcpu))
+		return false;
+
+	return kvm_vcpu_dabt_iswrite(vcpu);
+}
+
+static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
+{
+	return vcpu_read_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;
+}
+
+static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_mode_is_32bit(vcpu)) {
+		*vcpu_cpsr(vcpu) |= PSR_AA32_E_BIT;
+	} else {
+		u64 sctlr = vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+		sctlr |= SCTLR_ELx_EE;
+		vcpu_write_sys_reg(vcpu, sctlr, SCTLR_EL1);
+	}
+}
+
+static inline bool kvm_vcpu_is_be(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_mode_is_32bit(vcpu))
+		return !!(*vcpu_cpsr(vcpu) & PSR_AA32_E_BIT);
+
+	if (vcpu_mode_priv(vcpu))
+		return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_ELx_EE);
+	else
+		return !!(vcpu_read_sys_reg(vcpu, SCTLR_EL1) & SCTLR_EL1_E0E);
+}
+
+static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu,
+						    unsigned long data,
+						    unsigned int len)
+{
+	if (kvm_vcpu_is_be(vcpu)) {
+		switch (len) {
+		case 1:
+			return data & 0xff;
+		case 2:
+			return be16_to_cpu(data & 0xffff);
+		case 4:
+			return be32_to_cpu(data & 0xffffffff);
+		default:
+			return be64_to_cpu(data);
+		}
+	} else {
+		switch (len) {
+		case 1:
+			return data & 0xff;
+		case 2:
+			return le16_to_cpu(data & 0xffff);
+		case 4:
+			return le32_to_cpu(data & 0xffffffff);
+		default:
+			return le64_to_cpu(data);
+		}
+	}
+
+	return data;		/* Leave LE untouched */
+}
+
+static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu,
+						    unsigned long data,
+						    unsigned int len)
+{
+	if (kvm_vcpu_is_be(vcpu)) {
+		switch (len) {
+		case 1:
+			return data & 0xff;
+		case 2:
+			return cpu_to_be16(data & 0xffff);
+		case 4:
+			return cpu_to_be32(data & 0xffffffff);
+		default:
+			return cpu_to_be64(data);
+		}
+	} else {
+		switch (len) {
+		case 1:
+			return data & 0xff;
+		case 2:
+			return cpu_to_le16(data & 0xffff);
+		case 4:
+			return cpu_to_le32(data & 0xffffffff);
+		default:
+			return cpu_to_le64(data);
+		}
+	}
+
+	return data;		/* Leave LE untouched */
+}
+
+static __always_inline void kvm_incr_pc(struct kvm_vcpu *vcpu)
+{
+	WARN_ON(vcpu_get_flag(vcpu, PENDING_EXCEPTION));
+	vcpu_set_flag(vcpu, INCREMENT_PC);
+}
+
+#define kvm_pend_exception(v, e)					\
+	do {								\
+		WARN_ON(vcpu_get_flag((v), INCREMENT_PC));		\
+		vcpu_set_flag((v), PENDING_EXCEPTION);			\
+		vcpu_set_flag((v), e);					\
+	} while (0)
+
+
+static inline bool vcpu_has_feature(struct kvm_vcpu *vcpu, int feature)
+{
+	return test_bit(feature, vcpu->arch.features);
+}
+
+static __always_inline void kvm_write_cptr_el2(u64 val)
+{
+	if (has_vhe() || has_hvhe())
+		write_sysreg(val, cpacr_el1);
+	else
+		write_sysreg(val, cptr_el2);
+}
+
+static __always_inline u64 kvm_get_reset_cptr_el2(struct kvm_vcpu *vcpu)
+{
+	u64 val;
+
+	if (has_vhe()) {
+		val = (CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN |
+		       CPACR_EL1_ZEN_EL1EN);
+		if (cpus_have_final_cap(ARM64_SME))
+			val |= CPACR_EL1_SMEN_EL1EN;
+	} else if (has_hvhe()) {
+		val = (CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN);
+
+		if (!vcpu_has_sve(vcpu) ||
+		    (vcpu->arch.fp_state != FP_STATE_GUEST_OWNED))
+			val |= CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN;
+		if (cpus_have_final_cap(ARM64_SME))
+			val |= CPACR_EL1_SMEN_EL1EN | CPACR_EL1_SMEN_EL0EN;
+	} else {
+		val = CPTR_NVHE_EL2_RES1;
+
+		if (vcpu_has_sve(vcpu) &&
+		    (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED))
+			val |= CPTR_EL2_TZ;
+		if (cpus_have_final_cap(ARM64_SME))
+			val &= ~CPTR_EL2_TSM;
+	}
+
+	return val;
+}
+
+static __always_inline void kvm_reset_cptr_el2(struct kvm_vcpu *vcpu)
+{
+	u64 val = kvm_get_reset_cptr_el2(vcpu);
+
+	kvm_write_cptr_el2(val);
+}
+#endif /* __ARM64_KVM_EMULATE_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
new file mode 100644
index 000000000..af06ccb7e
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -0,0 +1,1157 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/include/asm/kvm_host.h:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#ifndef __ARM64_KVM_HOST_H__
+#define __ARM64_KVM_HOST_H__
+
+#include <linux/arm-smccc.h>
+#include <linux/bitmap.h>
+#include <linux/types.h>
+#include <linux/jump_label.h>
+#include <linux/kvm_types.h>
+#include <linux/maple_tree.h>
+#include <linux/percpu.h>
+#include <linux/psci.h>
+#include <asm/arch_gicv3.h>
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/cputype.h>
+#include <asm/daifflags.h>
+#include <asm/fpsimd.h>
+#include <asm/kvm.h>
+#include <asm/kvm_asm.h>
+
+#define __KVM_HAVE_ARCH_INTC_INITIALIZED
+
+#define KVM_HALT_POLL_NS_DEFAULT 500000
+
+#include <kvm/arm_vgic.h>
+#include <kvm/arm_arch_timer.h>
+#include <kvm/arm_pmu.h>
+
+#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
+
+#define KVM_VCPU_MAX_FEATURES 7
+#define KVM_VCPU_VALID_FEATURES	(BIT(KVM_VCPU_MAX_FEATURES) - 1)
+
+#define KVM_REQ_SLEEP \
+	KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
+#define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
+#define KVM_REQ_VCPU_RESET	KVM_ARCH_REQ(2)
+#define KVM_REQ_RECORD_STEAL	KVM_ARCH_REQ(3)
+#define KVM_REQ_RELOAD_GICv4	KVM_ARCH_REQ(4)
+#define KVM_REQ_RELOAD_PMU	KVM_ARCH_REQ(5)
+#define KVM_REQ_SUSPEND		KVM_ARCH_REQ(6)
+#define KVM_REQ_RESYNC_PMU_EL0	KVM_ARCH_REQ(7)
+
+#define KVM_DIRTY_LOG_MANUAL_CAPS   (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \
+				     KVM_DIRTY_LOG_INITIALLY_SET)
+
+#define KVM_HAVE_MMU_RWLOCK
+
+/*
+ * Mode of operation configurable with kvm-arm.mode early param.
+ * See Documentation/admin-guide/kernel-parameters.txt for more information.
+ */
+enum kvm_mode {
+	KVM_MODE_DEFAULT,
+	KVM_MODE_PROTECTED,
+	KVM_MODE_NV,
+	KVM_MODE_NONE,
+};
+#ifdef CONFIG_KVM
+enum kvm_mode kvm_get_mode(void);
+#else
+static inline enum kvm_mode kvm_get_mode(void) { return KVM_MODE_NONE; };
+#endif
+
+DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
+
+extern unsigned int __ro_after_init kvm_sve_max_vl;
+int __init kvm_arm_init_sve(void);
+
+u32 __attribute_const__ kvm_target_cpu(void);
+int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
+void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu);
+
+struct kvm_hyp_memcache {
+	phys_addr_t head;
+	unsigned long nr_pages;
+};
+
+static inline void push_hyp_memcache(struct kvm_hyp_memcache *mc,
+				     phys_addr_t *p,
+				     phys_addr_t (*to_pa)(void *virt))
+{
+	*p = mc->head;
+	mc->head = to_pa(p);
+	mc->nr_pages++;
+}
+
+static inline void *pop_hyp_memcache(struct kvm_hyp_memcache *mc,
+				     void *(*to_va)(phys_addr_t phys))
+{
+	phys_addr_t *p = to_va(mc->head);
+
+	if (!mc->nr_pages)
+		return NULL;
+
+	mc->head = *p;
+	mc->nr_pages--;
+
+	return p;
+}
+
+static inline int __topup_hyp_memcache(struct kvm_hyp_memcache *mc,
+				       unsigned long min_pages,
+				       void *(*alloc_fn)(void *arg),
+				       phys_addr_t (*to_pa)(void *virt),
+				       void *arg)
+{
+	while (mc->nr_pages < min_pages) {
+		phys_addr_t *p = alloc_fn(arg);
+
+		if (!p)
+			return -ENOMEM;
+		push_hyp_memcache(mc, p, to_pa);
+	}
+
+	return 0;
+}
+
+static inline void __free_hyp_memcache(struct kvm_hyp_memcache *mc,
+				       void (*free_fn)(void *virt, void *arg),
+				       void *(*to_va)(phys_addr_t phys),
+				       void *arg)
+{
+	while (mc->nr_pages)
+		free_fn(pop_hyp_memcache(mc, to_va), arg);
+}
+
+void free_hyp_memcache(struct kvm_hyp_memcache *mc);
+int topup_hyp_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages);
+
+struct kvm_vmid {
+	atomic64_t id;
+};
+
+struct kvm_s2_mmu {
+	struct kvm_vmid vmid;
+
+	/*
+	 * stage2 entry level table
+	 *
+	 * Two kvm_s2_mmu structures in the same VM can point to the same
+	 * pgd here.  This happens when running a guest using a
+	 * translation regime that isn't affected by its own stage-2
+	 * translation, such as a non-VHE hypervisor running at vEL2, or
+	 * for vEL1/EL0 with vHCR_EL2.VM == 0.  In that case, we use the
+	 * canonical stage-2 page tables.
+	 */
+	phys_addr_t	pgd_phys;
+	struct kvm_pgtable *pgt;
+
+	/* The last vcpu id that ran on each physical CPU */
+	int __percpu *last_vcpu_ran;
+
+#define KVM_ARM_EAGER_SPLIT_CHUNK_SIZE_DEFAULT 0
+	/*
+	 * Memory cache used to split
+	 * KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE worth of huge pages. It
+	 * is used to allocate stage2 page tables while splitting huge
+	 * pages. The choice of KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
+	 * influences both the capacity of the split page cache, and
+	 * how often KVM reschedules. Be wary of raising CHUNK_SIZE
+	 * too high.
+	 *
+	 * Protected by kvm->slots_lock.
+	 */
+	struct kvm_mmu_memory_cache split_page_cache;
+	uint64_t split_page_chunk_size;
+
+	struct kvm_arch *arch;
+};
+
+struct kvm_arch_memory_slot {
+};
+
+/**
+ * struct kvm_smccc_features: Descriptor of the hypercall services exposed to the guests
+ *
+ * @std_bmap: Bitmap of standard secure service calls
+ * @std_hyp_bmap: Bitmap of standard hypervisor service calls
+ * @vendor_hyp_bmap: Bitmap of vendor specific hypervisor service calls
+ */
+struct kvm_smccc_features {
+	unsigned long std_bmap;
+	unsigned long std_hyp_bmap;
+	unsigned long vendor_hyp_bmap;
+};
+
+typedef unsigned int pkvm_handle_t;
+
+struct kvm_protected_vm {
+	pkvm_handle_t handle;
+	struct kvm_hyp_memcache teardown_mc;
+};
+
+struct kvm_arch {
+	struct kvm_s2_mmu mmu;
+
+	/* VTCR_EL2 value for this VM */
+	u64    vtcr;
+
+	/* Interrupt controller */
+	struct vgic_dist	vgic;
+
+	/* Timers */
+	struct arch_timer_vm_data timer_data;
+
+	/* Mandated version of PSCI */
+	u32 psci_version;
+
+	/* Protects VM-scoped configuration data */
+	struct mutex config_lock;
+
+	/*
+	 * If we encounter a data abort without valid instruction syndrome
+	 * information, report this to user space.  User space can (and
+	 * should) opt in to this feature if KVM_CAP_ARM_NISV_TO_USER is
+	 * supported.
+	 */
+#define KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER	0
+	/* Memory Tagging Extension enabled for the guest */
+#define KVM_ARCH_FLAG_MTE_ENABLED			1
+	/* At least one vCPU has ran in the VM */
+#define KVM_ARCH_FLAG_HAS_RAN_ONCE			2
+	/* The vCPU feature set for the VM is configured */
+#define KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED		3
+	/* PSCI SYSTEM_SUSPEND enabled for the guest */
+#define KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED		4
+	/* VM counter offset */
+#define KVM_ARCH_FLAG_VM_COUNTER_OFFSET			5
+	/* Timer PPIs made immutable */
+#define KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE		6
+	/* SMCCC filter initialized for the VM */
+#define KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED		7
+	/* Initial ID reg values loaded */
+#define KVM_ARCH_FLAG_ID_REGS_INITIALIZED		8
+	unsigned long flags;
+
+	/* VM-wide vCPU feature set */
+	DECLARE_BITMAP(vcpu_features, KVM_VCPU_MAX_FEATURES);
+
+	/*
+	 * VM-wide PMU filter, implemented as a bitmap and big enough for
+	 * up to 2^10 events (ARMv8.0) or 2^16 events (ARMv8.1+).
+	 */
+	unsigned long *pmu_filter;
+	struct arm_pmu *arm_pmu;
+
+	cpumask_var_t supported_cpus;
+
+	/* Hypercall features firmware registers' descriptor */
+	struct kvm_smccc_features smccc_feat;
+	struct maple_tree smccc_filter;
+
+	/*
+	 * Emulated CPU ID registers per VM
+	 * (Op0, Op1, CRn, CRm, Op2) of the ID registers to be saved in it
+	 * is (3, 0, 0, crm, op2), where 1<=crm<8, 0<=op2<8.
+	 *
+	 * These emulated idregs are VM-wide, but accessed from the context of a vCPU.
+	 * Atomic access to multiple idregs are guarded by kvm_arch.config_lock.
+	 */
+#define IDREG_IDX(id)		(((sys_reg_CRm(id) - 1) << 3) | sys_reg_Op2(id))
+#define IDREG(kvm, id)		((kvm)->arch.id_regs[IDREG_IDX(id)])
+#define KVM_ARM_ID_REG_NUM	(IDREG_IDX(sys_reg(3, 0, 0, 7, 7)) + 1)
+	u64 id_regs[KVM_ARM_ID_REG_NUM];
+
+	/*
+	 * For an untrusted host VM, 'pkvm.handle' is used to lookup
+	 * the associated pKVM instance in the hypervisor.
+	 */
+	struct kvm_protected_vm pkvm;
+};
+
+struct kvm_vcpu_fault_info {
+	u64 esr_el2;		/* Hyp Syndrom Register */
+	u64 far_el2;		/* Hyp Fault Address Register */
+	u64 hpfar_el2;		/* Hyp IPA Fault Address Register */
+	u64 disr_el1;		/* Deferred [SError] Status Register */
+};
+
+enum vcpu_sysreg {
+	__INVALID_SYSREG__,   /* 0 is reserved as an invalid value */
+	MPIDR_EL1,	/* MultiProcessor Affinity Register */
+	CLIDR_EL1,	/* Cache Level ID Register */
+	CSSELR_EL1,	/* Cache Size Selection Register */
+	SCTLR_EL1,	/* System Control Register */
+	ACTLR_EL1,	/* Auxiliary Control Register */
+	CPACR_EL1,	/* Coprocessor Access Control */
+	ZCR_EL1,	/* SVE Control */
+	TTBR0_EL1,	/* Translation Table Base Register 0 */
+	TTBR1_EL1,	/* Translation Table Base Register 1 */
+	TCR_EL1,	/* Translation Control Register */
+	TCR2_EL1,	/* Extended Translation Control Register */
+	ESR_EL1,	/* Exception Syndrome Register */
+	AFSR0_EL1,	/* Auxiliary Fault Status Register 0 */
+	AFSR1_EL1,	/* Auxiliary Fault Status Register 1 */
+	FAR_EL1,	/* Fault Address Register */
+	MAIR_EL1,	/* Memory Attribute Indirection Register */
+	VBAR_EL1,	/* Vector Base Address Register */
+	CONTEXTIDR_EL1,	/* Context ID Register */
+	TPIDR_EL0,	/* Thread ID, User R/W */
+	TPIDRRO_EL0,	/* Thread ID, User R/O */
+	TPIDR_EL1,	/* Thread ID, Privileged */
+	AMAIR_EL1,	/* Aux Memory Attribute Indirection Register */
+	CNTKCTL_EL1,	/* Timer Control Register (EL1) */
+	PAR_EL1,	/* Physical Address Register */
+	MDSCR_EL1,	/* Monitor Debug System Control Register */
+	MDCCINT_EL1,	/* Monitor Debug Comms Channel Interrupt Enable Reg */
+	OSLSR_EL1,	/* OS Lock Status Register */
+	DISR_EL1,	/* Deferred Interrupt Status Register */
+
+	/* Performance Monitors Registers */
+	PMCR_EL0,	/* Control Register */
+	PMSELR_EL0,	/* Event Counter Selection Register */
+	PMEVCNTR0_EL0,	/* Event Counter Register (0-30) */
+	PMEVCNTR30_EL0 = PMEVCNTR0_EL0 + 30,
+	PMCCNTR_EL0,	/* Cycle Counter Register */
+	PMEVTYPER0_EL0,	/* Event Type Register (0-30) */
+	PMEVTYPER30_EL0 = PMEVTYPER0_EL0 + 30,
+	PMCCFILTR_EL0,	/* Cycle Count Filter Register */
+	PMCNTENSET_EL0,	/* Count Enable Set Register */
+	PMINTENSET_EL1,	/* Interrupt Enable Set Register */
+	PMOVSSET_EL0,	/* Overflow Flag Status Set Register */
+	PMUSERENR_EL0,	/* User Enable Register */
+
+	/* Pointer Authentication Registers in a strict increasing order. */
+	APIAKEYLO_EL1,
+	APIAKEYHI_EL1,
+	APIBKEYLO_EL1,
+	APIBKEYHI_EL1,
+	APDAKEYLO_EL1,
+	APDAKEYHI_EL1,
+	APDBKEYLO_EL1,
+	APDBKEYHI_EL1,
+	APGAKEYLO_EL1,
+	APGAKEYHI_EL1,
+
+	ELR_EL1,
+	SP_EL1,
+	SPSR_EL1,
+
+	CNTVOFF_EL2,
+	CNTV_CVAL_EL0,
+	CNTV_CTL_EL0,
+	CNTP_CVAL_EL0,
+	CNTP_CTL_EL0,
+
+	/* Memory Tagging Extension registers */
+	RGSR_EL1,	/* Random Allocation Tag Seed Register */
+	GCR_EL1,	/* Tag Control Register */
+	TFSR_EL1,	/* Tag Fault Status Register (EL1) */
+	TFSRE0_EL1,	/* Tag Fault Status Register (EL0) */
+
+	/* Permission Indirection Extension registers */
+	PIR_EL1,       /* Permission Indirection Register 1 (EL1) */
+	PIRE0_EL1,     /*  Permission Indirection Register 0 (EL1) */
+
+	/* 32bit specific registers. */
+	DACR32_EL2,	/* Domain Access Control Register */
+	IFSR32_EL2,	/* Instruction Fault Status Register */
+	FPEXC32_EL2,	/* Floating-Point Exception Control Register */
+	DBGVCR32_EL2,	/* Debug Vector Catch Register */
+
+	/* EL2 registers */
+	VPIDR_EL2,	/* Virtualization Processor ID Register */
+	VMPIDR_EL2,	/* Virtualization Multiprocessor ID Register */
+	SCTLR_EL2,	/* System Control Register (EL2) */
+	ACTLR_EL2,	/* Auxiliary Control Register (EL2) */
+	HCR_EL2,	/* Hypervisor Configuration Register */
+	MDCR_EL2,	/* Monitor Debug Configuration Register (EL2) */
+	CPTR_EL2,	/* Architectural Feature Trap Register (EL2) */
+	HSTR_EL2,	/* Hypervisor System Trap Register */
+	HACR_EL2,	/* Hypervisor Auxiliary Control Register */
+	HCRX_EL2,	/* Extended Hypervisor Configuration Register */
+	TTBR0_EL2,	/* Translation Table Base Register 0 (EL2) */
+	TTBR1_EL2,	/* Translation Table Base Register 1 (EL2) */
+	TCR_EL2,	/* Translation Control Register (EL2) */
+	VTTBR_EL2,	/* Virtualization Translation Table Base Register */
+	VTCR_EL2,	/* Virtualization Translation Control Register */
+	SPSR_EL2,	/* EL2 saved program status register */
+	ELR_EL2,	/* EL2 exception link register */
+	AFSR0_EL2,	/* Auxiliary Fault Status Register 0 (EL2) */
+	AFSR1_EL2,	/* Auxiliary Fault Status Register 1 (EL2) */
+	ESR_EL2,	/* Exception Syndrome Register (EL2) */
+	FAR_EL2,	/* Fault Address Register (EL2) */
+	HPFAR_EL2,	/* Hypervisor IPA Fault Address Register */
+	MAIR_EL2,	/* Memory Attribute Indirection Register (EL2) */
+	AMAIR_EL2,	/* Auxiliary Memory Attribute Indirection Register (EL2) */
+	VBAR_EL2,	/* Vector Base Address Register (EL2) */
+	RVBAR_EL2,	/* Reset Vector Base Address Register */
+	CONTEXTIDR_EL2,	/* Context ID Register (EL2) */
+	TPIDR_EL2,	/* EL2 Software Thread ID Register */
+	CNTHCTL_EL2,	/* Counter-timer Hypervisor Control register */
+	SP_EL2,		/* EL2 Stack Pointer */
+	HFGRTR_EL2,
+	HFGWTR_EL2,
+	HFGITR_EL2,
+	HDFGRTR_EL2,
+	HDFGWTR_EL2,
+	CNTHP_CTL_EL2,
+	CNTHP_CVAL_EL2,
+	CNTHV_CTL_EL2,
+	CNTHV_CVAL_EL2,
+
+	NR_SYS_REGS	/* Nothing after this line! */
+};
+
+struct kvm_cpu_context {
+	struct user_pt_regs regs;	/* sp = sp_el0 */
+
+	u64	spsr_abt;
+	u64	spsr_und;
+	u64	spsr_irq;
+	u64	spsr_fiq;
+
+	struct user_fpsimd_state fp_regs;
+
+	u64 sys_regs[NR_SYS_REGS];
+
+	struct kvm_vcpu *__hyp_running_vcpu;
+};
+
+struct kvm_host_data {
+	struct kvm_cpu_context host_ctxt;
+};
+
+struct kvm_host_psci_config {
+	/* PSCI version used by host. */
+	u32 version;
+	u32 smccc_version;
+
+	/* Function IDs used by host if version is v0.1. */
+	struct psci_0_1_function_ids function_ids_0_1;
+
+	bool psci_0_1_cpu_suspend_implemented;
+	bool psci_0_1_cpu_on_implemented;
+	bool psci_0_1_cpu_off_implemented;
+	bool psci_0_1_migrate_implemented;
+};
+
+extern struct kvm_host_psci_config kvm_nvhe_sym(kvm_host_psci_config);
+#define kvm_host_psci_config CHOOSE_NVHE_SYM(kvm_host_psci_config)
+
+extern s64 kvm_nvhe_sym(hyp_physvirt_offset);
+#define hyp_physvirt_offset CHOOSE_NVHE_SYM(hyp_physvirt_offset)
+
+extern u64 kvm_nvhe_sym(hyp_cpu_logical_map)[NR_CPUS];
+#define hyp_cpu_logical_map CHOOSE_NVHE_SYM(hyp_cpu_logical_map)
+
+struct vcpu_reset_state {
+	unsigned long	pc;
+	unsigned long	r0;
+	bool		be;
+	bool		reset;
+};
+
+struct kvm_vcpu_arch {
+	struct kvm_cpu_context ctxt;
+
+	/*
+	 * Guest floating point state
+	 *
+	 * The architecture has two main floating point extensions,
+	 * the original FPSIMD and SVE.  These have overlapping
+	 * register views, with the FPSIMD V registers occupying the
+	 * low 128 bits of the SVE Z registers.  When the core
+	 * floating point code saves the register state of a task it
+	 * records which view it saved in fp_type.
+	 */
+	void *sve_state;
+	enum fp_type fp_type;
+	unsigned int sve_max_vl;
+	u64 svcr;
+
+	/* Stage 2 paging state used by the hardware on next switch */
+	struct kvm_s2_mmu *hw_mmu;
+
+	/* Values of trap registers for the guest. */
+	u64 hcr_el2;
+	u64 mdcr_el2;
+	u64 cptr_el2;
+
+	/* Values of trap registers for the host before guest entry. */
+	u64 mdcr_el2_host;
+
+	/* Exception Information */
+	struct kvm_vcpu_fault_info fault;
+
+	/* Ownership of the FP regs */
+	enum {
+		FP_STATE_FREE,
+		FP_STATE_HOST_OWNED,
+		FP_STATE_GUEST_OWNED,
+	} fp_state;
+
+	/* Configuration flags, set once and for all before the vcpu can run */
+	u8 cflags;
+
+	/* Input flags to the hypervisor code, potentially cleared after use */
+	u8 iflags;
+
+	/* State flags for kernel bookkeeping, unused by the hypervisor code */
+	u8 sflags;
+
+	/*
+	 * Don't run the guest (internal implementation need).
+	 *
+	 * Contrary to the flags above, this is set/cleared outside of
+	 * a vcpu context, and thus cannot be mixed with the flags
+	 * themselves (or the flag accesses need to be made atomic).
+	 */
+	bool pause;
+
+	/*
+	 * We maintain more than a single set of debug registers to support
+	 * debugging the guest from the host and to maintain separate host and
+	 * guest state during world switches. vcpu_debug_state are the debug
+	 * registers of the vcpu as the guest sees them.  host_debug_state are
+	 * the host registers which are saved and restored during
+	 * world switches. external_debug_state contains the debug
+	 * values we want to debug the guest. This is set via the
+	 * KVM_SET_GUEST_DEBUG ioctl.
+	 *
+	 * debug_ptr points to the set of debug registers that should be loaded
+	 * onto the hardware when running the guest.
+	 */
+	struct kvm_guest_debug_arch *debug_ptr;
+	struct kvm_guest_debug_arch vcpu_debug_state;
+	struct kvm_guest_debug_arch external_debug_state;
+
+	struct user_fpsimd_state *host_fpsimd_state;	/* hyp VA */
+	struct task_struct *parent_task;
+
+	struct {
+		/* {Break,watch}point registers */
+		struct kvm_guest_debug_arch regs;
+		/* Statistical profiling extension */
+		u64 pmscr_el1;
+		/* Self-hosted trace */
+		u64 trfcr_el1;
+	} host_debug_state;
+
+	/* VGIC state */
+	struct vgic_cpu vgic_cpu;
+	struct arch_timer_cpu timer_cpu;
+	struct kvm_pmu pmu;
+
+	/*
+	 * Guest registers we preserve during guest debugging.
+	 *
+	 * These shadow registers are updated by the kvm_handle_sys_reg
+	 * trap handler if the guest accesses or updates them while we
+	 * are using guest debug.
+	 */
+	struct {
+		u32	mdscr_el1;
+		bool	pstate_ss;
+	} guest_debug_preserved;
+
+	/* vcpu power state */
+	struct kvm_mp_state mp_state;
+	spinlock_t mp_state_lock;
+
+	/* Cache some mmu pages needed inside spinlock regions */
+	struct kvm_mmu_memory_cache mmu_page_cache;
+
+	/* feature flags */
+	DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES);
+
+	/* Virtual SError ESR to restore when HCR_EL2.VSE is set */
+	u64 vsesr_el2;
+
+	/* Additional reset state */
+	struct vcpu_reset_state	reset_state;
+
+	/* Guest PV state */
+	struct {
+		u64 last_steal;
+		gpa_t base;
+	} steal;
+
+	/* Per-vcpu CCSIDR override or NULL */
+	u32 *ccsidr;
+};
+
+/*
+ * Each 'flag' is composed of a comma-separated triplet:
+ *
+ * - the flag-set it belongs to in the vcpu->arch structure
+ * - the value for that flag
+ * - the mask for that flag
+ *
+ *  __vcpu_single_flag() builds such a triplet for a single-bit flag.
+ * unpack_vcpu_flag() extract the flag value from the triplet for
+ * direct use outside of the flag accessors.
+ */
+#define __vcpu_single_flag(_set, _f)	_set, (_f), (_f)
+
+#define __unpack_flag(_set, _f, _m)	_f
+#define unpack_vcpu_flag(...)		__unpack_flag(__VA_ARGS__)
+
+#define __build_check_flag(v, flagset, f, m)			\
+	do {							\
+		typeof(v->arch.flagset) *_fset;			\
+								\
+		/* Check that the flags fit in the mask */	\
+		BUILD_BUG_ON(HWEIGHT(m) != HWEIGHT((f) | (m)));	\
+		/* Check that the flags fit in the type */	\
+		BUILD_BUG_ON((sizeof(*_fset) * 8) <= __fls(m));	\
+	} while (0)
+
+#define __vcpu_get_flag(v, flagset, f, m)			\
+	({							\
+		__build_check_flag(v, flagset, f, m);		\
+								\
+		READ_ONCE(v->arch.flagset) & (m);		\
+	})
+
+/*
+ * Note that the set/clear accessors must be preempt-safe in order to
+ * avoid nesting them with load/put which also manipulate flags...
+ */
+#ifdef __KVM_NVHE_HYPERVISOR__
+/* the nVHE hypervisor is always non-preemptible */
+#define __vcpu_flags_preempt_disable()
+#define __vcpu_flags_preempt_enable()
+#else
+#define __vcpu_flags_preempt_disable()	preempt_disable()
+#define __vcpu_flags_preempt_enable()	preempt_enable()
+#endif
+
+#define __vcpu_set_flag(v, flagset, f, m)			\
+	do {							\
+		typeof(v->arch.flagset) *fset;			\
+								\
+		__build_check_flag(v, flagset, f, m);		\
+								\
+		fset = &v->arch.flagset;			\
+		__vcpu_flags_preempt_disable();			\
+		if (HWEIGHT(m) > 1)				\
+			*fset &= ~(m);				\
+		*fset |= (f);					\
+		__vcpu_flags_preempt_enable();			\
+	} while (0)
+
+#define __vcpu_clear_flag(v, flagset, f, m)			\
+	do {							\
+		typeof(v->arch.flagset) *fset;			\
+								\
+		__build_check_flag(v, flagset, f, m);		\
+								\
+		fset = &v->arch.flagset;			\
+		__vcpu_flags_preempt_disable();			\
+		*fset &= ~(m);					\
+		__vcpu_flags_preempt_enable();			\
+	} while (0)
+
+#define vcpu_get_flag(v, ...)	__vcpu_get_flag((v), __VA_ARGS__)
+#define vcpu_set_flag(v, ...)	__vcpu_set_flag((v), __VA_ARGS__)
+#define vcpu_clear_flag(v, ...)	__vcpu_clear_flag((v), __VA_ARGS__)
+
+/* SVE exposed to guest */
+#define GUEST_HAS_SVE		__vcpu_single_flag(cflags, BIT(0))
+/* SVE config completed */
+#define VCPU_SVE_FINALIZED	__vcpu_single_flag(cflags, BIT(1))
+/* PTRAUTH exposed to guest */
+#define GUEST_HAS_PTRAUTH	__vcpu_single_flag(cflags, BIT(2))
+/* KVM_ARM_VCPU_INIT completed */
+#define VCPU_INITIALIZED	__vcpu_single_flag(cflags, BIT(3))
+
+/* Exception pending */
+#define PENDING_EXCEPTION	__vcpu_single_flag(iflags, BIT(0))
+/*
+ * PC increment. Overlaps with EXCEPT_MASK on purpose so that it can't
+ * be set together with an exception...
+ */
+#define INCREMENT_PC		__vcpu_single_flag(iflags, BIT(1))
+/* Target EL/MODE (not a single flag, but let's abuse the macro) */
+#define EXCEPT_MASK		__vcpu_single_flag(iflags, GENMASK(3, 1))
+
+/* Helpers to encode exceptions with minimum fuss */
+#define __EXCEPT_MASK_VAL	unpack_vcpu_flag(EXCEPT_MASK)
+#define __EXCEPT_SHIFT		__builtin_ctzl(__EXCEPT_MASK_VAL)
+#define __vcpu_except_flags(_f)	iflags, (_f << __EXCEPT_SHIFT), __EXCEPT_MASK_VAL
+
+/*
+ * When PENDING_EXCEPTION is set, EXCEPT_MASK can take the following
+ * values:
+ *
+ * For AArch32 EL1:
+ */
+#define EXCEPT_AA32_UND		__vcpu_except_flags(0)
+#define EXCEPT_AA32_IABT	__vcpu_except_flags(1)
+#define EXCEPT_AA32_DABT	__vcpu_except_flags(2)
+/* For AArch64: */
+#define EXCEPT_AA64_EL1_SYNC	__vcpu_except_flags(0)
+#define EXCEPT_AA64_EL1_IRQ	__vcpu_except_flags(1)
+#define EXCEPT_AA64_EL1_FIQ	__vcpu_except_flags(2)
+#define EXCEPT_AA64_EL1_SERR	__vcpu_except_flags(3)
+/* For AArch64 with NV: */
+#define EXCEPT_AA64_EL2_SYNC	__vcpu_except_flags(4)
+#define EXCEPT_AA64_EL2_IRQ	__vcpu_except_flags(5)
+#define EXCEPT_AA64_EL2_FIQ	__vcpu_except_flags(6)
+#define EXCEPT_AA64_EL2_SERR	__vcpu_except_flags(7)
+/* Guest debug is live */
+#define DEBUG_DIRTY		__vcpu_single_flag(iflags, BIT(4))
+/* Save SPE context if active  */
+#define DEBUG_STATE_SAVE_SPE	__vcpu_single_flag(iflags, BIT(5))
+/* Save TRBE context if active  */
+#define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
+/* vcpu running in HYP context */
+#define VCPU_HYP_CONTEXT	__vcpu_single_flag(iflags, BIT(7))
+
+/* SVE enabled for host EL0 */
+#define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
+/* SME enabled for EL0 */
+#define HOST_SME_ENABLED	__vcpu_single_flag(sflags, BIT(1))
+/* Physical CPU not in supported_cpus */
+#define ON_UNSUPPORTED_CPU	__vcpu_single_flag(sflags, BIT(2))
+/* WFIT instruction trapped */
+#define IN_WFIT			__vcpu_single_flag(sflags, BIT(3))
+/* vcpu system registers loaded on physical CPU */
+#define SYSREGS_ON_CPU		__vcpu_single_flag(sflags, BIT(4))
+/* Software step state is Active-pending */
+#define DBG_SS_ACTIVE_PENDING	__vcpu_single_flag(sflags, BIT(5))
+/* PMUSERENR for the guest EL0 is on physical CPU */
+#define PMUSERENR_ON_CPU	__vcpu_single_flag(sflags, BIT(6))
+/* WFI instruction trapped */
+#define IN_WFI			__vcpu_single_flag(sflags, BIT(7))
+
+
+/* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
+#define vcpu_sve_pffr(vcpu) (kern_hyp_va((vcpu)->arch.sve_state) +	\
+			     sve_ffr_offset((vcpu)->arch.sve_max_vl))
+
+#define vcpu_sve_max_vq(vcpu)	sve_vq_from_vl((vcpu)->arch.sve_max_vl)
+
+#define vcpu_sve_state_size(vcpu) ({					\
+	size_t __size_ret;						\
+	unsigned int __vcpu_vq;						\
+									\
+	if (WARN_ON(!sve_vl_valid((vcpu)->arch.sve_max_vl))) {		\
+		__size_ret = 0;						\
+	} else {							\
+		__vcpu_vq = vcpu_sve_max_vq(vcpu);			\
+		__size_ret = SVE_SIG_REGS_SIZE(__vcpu_vq);		\
+	}								\
+									\
+	__size_ret;							\
+})
+
+#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | \
+				 KVM_GUESTDBG_USE_SW_BP | \
+				 KVM_GUESTDBG_USE_HW | \
+				 KVM_GUESTDBG_SINGLESTEP)
+
+#define vcpu_has_sve(vcpu) (system_supports_sve() &&			\
+			    vcpu_get_flag(vcpu, GUEST_HAS_SVE))
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+#define vcpu_has_ptrauth(vcpu)						\
+	((cpus_have_final_cap(ARM64_HAS_ADDRESS_AUTH) ||		\
+	  cpus_have_final_cap(ARM64_HAS_GENERIC_AUTH)) &&		\
+	  vcpu_get_flag(vcpu, GUEST_HAS_PTRAUTH))
+#else
+#define vcpu_has_ptrauth(vcpu)		false
+#endif
+
+#define vcpu_on_unsupported_cpu(vcpu)					\
+	vcpu_get_flag(vcpu, ON_UNSUPPORTED_CPU)
+
+#define vcpu_set_on_unsupported_cpu(vcpu)				\
+	vcpu_set_flag(vcpu, ON_UNSUPPORTED_CPU)
+
+#define vcpu_clear_on_unsupported_cpu(vcpu)				\
+	vcpu_clear_flag(vcpu, ON_UNSUPPORTED_CPU)
+
+#define vcpu_gp_regs(v)		(&(v)->arch.ctxt.regs)
+
+/*
+ * Only use __vcpu_sys_reg/ctxt_sys_reg if you know you want the
+ * memory backed version of a register, and not the one most recently
+ * accessed by a running VCPU.  For example, for userspace access or
+ * for system registers that are never context switched, but only
+ * emulated.
+ */
+#define __ctxt_sys_reg(c,r)	(&(c)->sys_regs[(r)])
+
+#define ctxt_sys_reg(c,r)	(*__ctxt_sys_reg(c,r))
+
+#define __vcpu_sys_reg(v,r)	(ctxt_sys_reg(&(v)->arch.ctxt, (r)))
+
+u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg);
+void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg);
+
+static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
+{
+	/*
+	 * *** VHE ONLY ***
+	 *
+	 * System registers listed in the switch are not saved on every
+	 * exit from the guest but are only saved on vcpu_put.
+	 *
+	 * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
+	 * should never be listed below, because the guest cannot modify its
+	 * own MPIDR_EL1 and MPIDR_EL1 is accessed for VCPU A from VCPU B's
+	 * thread when emulating cross-VCPU communication.
+	 */
+	if (!has_vhe())
+		return false;
+
+	switch (reg) {
+	case SCTLR_EL1:		*val = read_sysreg_s(SYS_SCTLR_EL12);	break;
+	case CPACR_EL1:		*val = read_sysreg_s(SYS_CPACR_EL12);	break;
+	case TTBR0_EL1:		*val = read_sysreg_s(SYS_TTBR0_EL12);	break;
+	case TTBR1_EL1:		*val = read_sysreg_s(SYS_TTBR1_EL12);	break;
+	case TCR_EL1:		*val = read_sysreg_s(SYS_TCR_EL12);	break;
+	case ESR_EL1:		*val = read_sysreg_s(SYS_ESR_EL12);	break;
+	case AFSR0_EL1:		*val = read_sysreg_s(SYS_AFSR0_EL12);	break;
+	case AFSR1_EL1:		*val = read_sysreg_s(SYS_AFSR1_EL12);	break;
+	case FAR_EL1:		*val = read_sysreg_s(SYS_FAR_EL12);	break;
+	case MAIR_EL1:		*val = read_sysreg_s(SYS_MAIR_EL12);	break;
+	case VBAR_EL1:		*val = read_sysreg_s(SYS_VBAR_EL12);	break;
+	case CONTEXTIDR_EL1:	*val = read_sysreg_s(SYS_CONTEXTIDR_EL12);break;
+	case TPIDR_EL0:		*val = read_sysreg_s(SYS_TPIDR_EL0);	break;
+	case TPIDRRO_EL0:	*val = read_sysreg_s(SYS_TPIDRRO_EL0);	break;
+	case TPIDR_EL1:		*val = read_sysreg_s(SYS_TPIDR_EL1);	break;
+	case AMAIR_EL1:		*val = read_sysreg_s(SYS_AMAIR_EL12);	break;
+	case CNTKCTL_EL1:	*val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
+	case ELR_EL1:		*val = read_sysreg_s(SYS_ELR_EL12);	break;
+	case PAR_EL1:		*val = read_sysreg_par();		break;
+	case DACR32_EL2:	*val = read_sysreg_s(SYS_DACR32_EL2);	break;
+	case IFSR32_EL2:	*val = read_sysreg_s(SYS_IFSR32_EL2);	break;
+	case DBGVCR32_EL2:	*val = read_sysreg_s(SYS_DBGVCR32_EL2);	break;
+	default:		return false;
+	}
+
+	return true;
+}
+
+static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
+{
+	/*
+	 * *** VHE ONLY ***
+	 *
+	 * System registers listed in the switch are not restored on every
+	 * entry to the guest but are only restored on vcpu_load.
+	 *
+	 * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
+	 * should never be listed below, because the MPIDR should only be set
+	 * once, before running the VCPU, and never changed later.
+	 */
+	if (!has_vhe())
+		return false;
+
+	switch (reg) {
+	case SCTLR_EL1:		write_sysreg_s(val, SYS_SCTLR_EL12);	break;
+	case CPACR_EL1:		write_sysreg_s(val, SYS_CPACR_EL12);	break;
+	case TTBR0_EL1:		write_sysreg_s(val, SYS_TTBR0_EL12);	break;
+	case TTBR1_EL1:		write_sysreg_s(val, SYS_TTBR1_EL12);	break;
+	case TCR_EL1:		write_sysreg_s(val, SYS_TCR_EL12);	break;
+	case ESR_EL1:		write_sysreg_s(val, SYS_ESR_EL12);	break;
+	case AFSR0_EL1:		write_sysreg_s(val, SYS_AFSR0_EL12);	break;
+	case AFSR1_EL1:		write_sysreg_s(val, SYS_AFSR1_EL12);	break;
+	case FAR_EL1:		write_sysreg_s(val, SYS_FAR_EL12);	break;
+	case MAIR_EL1:		write_sysreg_s(val, SYS_MAIR_EL12);	break;
+	case VBAR_EL1:		write_sysreg_s(val, SYS_VBAR_EL12);	break;
+	case CONTEXTIDR_EL1:	write_sysreg_s(val, SYS_CONTEXTIDR_EL12);break;
+	case TPIDR_EL0:		write_sysreg_s(val, SYS_TPIDR_EL0);	break;
+	case TPIDRRO_EL0:	write_sysreg_s(val, SYS_TPIDRRO_EL0);	break;
+	case TPIDR_EL1:		write_sysreg_s(val, SYS_TPIDR_EL1);	break;
+	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
+	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
+	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
+	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
+	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
+	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
+	case DBGVCR32_EL2:	write_sysreg_s(val, SYS_DBGVCR32_EL2);	break;
+	default:		return false;
+	}
+
+	return true;
+}
+
+struct kvm_vm_stat {
+	struct kvm_vm_stat_generic generic;
+};
+
+struct kvm_vcpu_stat {
+	struct kvm_vcpu_stat_generic generic;
+	u64 hvc_exit_stat;
+	u64 wfe_exit_stat;
+	u64 wfi_exit_stat;
+	u64 mmio_exit_user;
+	u64 mmio_exit_kernel;
+	u64 signal_exits;
+	u64 exits;
+};
+
+unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
+int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
+int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
+int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
+
+unsigned long kvm_arm_num_sys_reg_descs(struct kvm_vcpu *vcpu);
+int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices);
+
+int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
+			      struct kvm_vcpu_events *events);
+
+int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
+			      struct kvm_vcpu_events *events);
+
+#define KVM_ARCH_WANT_MMU_NOTIFIER
+
+void kvm_arm_halt_guest(struct kvm *kvm);
+void kvm_arm_resume_guest(struct kvm *kvm);
+
+#define vcpu_has_run_once(vcpu)	!!rcu_access_pointer((vcpu)->pid)
+
+#ifndef __KVM_NVHE_HYPERVISOR__
+#define kvm_call_hyp_nvhe(f, ...)						\
+	({								\
+		struct arm_smccc_res res;				\
+									\
+		arm_smccc_1_1_hvc(KVM_HOST_SMCCC_FUNC(f),		\
+				  ##__VA_ARGS__, &res);			\
+		WARN_ON(res.a0 != SMCCC_RET_SUCCESS);			\
+									\
+		res.a1;							\
+	})
+
+/*
+ * The couple of isb() below are there to guarantee the same behaviour
+ * on VHE as on !VHE, where the eret to EL1 acts as a context
+ * synchronization event.
+ */
+#define kvm_call_hyp(f, ...)						\
+	do {								\
+		if (has_vhe()) {					\
+			f(__VA_ARGS__);					\
+			isb();						\
+		} else {						\
+			kvm_call_hyp_nvhe(f, ##__VA_ARGS__);		\
+		}							\
+	} while(0)
+
+#define kvm_call_hyp_ret(f, ...)					\
+	({								\
+		typeof(f(__VA_ARGS__)) ret;				\
+									\
+		if (has_vhe()) {					\
+			ret = f(__VA_ARGS__);				\
+			isb();						\
+		} else {						\
+			ret = kvm_call_hyp_nvhe(f, ##__VA_ARGS__);	\
+		}							\
+									\
+		ret;							\
+	})
+#else /* __KVM_NVHE_HYPERVISOR__ */
+#define kvm_call_hyp(f, ...) f(__VA_ARGS__)
+#define kvm_call_hyp_ret(f, ...) f(__VA_ARGS__)
+#define kvm_call_hyp_nvhe(f, ...) f(__VA_ARGS__)
+#endif /* __KVM_NVHE_HYPERVISOR__ */
+
+int handle_exit(struct kvm_vcpu *vcpu, int exception_index);
+void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index);
+
+int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu);
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu);
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu);
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu);
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu);
+int kvm_handle_sys_reg(struct kvm_vcpu *vcpu);
+int kvm_handle_cp10_id(struct kvm_vcpu *vcpu);
+
+void kvm_reset_sys_regs(struct kvm_vcpu *vcpu);
+
+int __init kvm_sys_reg_table_init(void);
+int __init populate_nv_trap_config(void);
+
+bool lock_all_vcpus(struct kvm *kvm);
+void unlock_all_vcpus(struct kvm *kvm);
+
+/* MMIO helpers */
+void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data);
+unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len);
+
+int kvm_handle_mmio_return(struct kvm_vcpu *vcpu);
+int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa);
+
+/*
+ * Returns true if a Performance Monitoring Interrupt (PMI), a.k.a. perf event,
+ * arrived in guest context.  For arm64, any event that arrives while a vCPU is
+ * loaded is considered to be "in guest".
+ */
+static inline bool kvm_arch_pmi_in_guest(struct kvm_vcpu *vcpu)
+{
+	return IS_ENABLED(CONFIG_GUEST_PERF_EVENTS) && !!vcpu;
+}
+
+long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu);
+gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu);
+void kvm_update_stolen_time(struct kvm_vcpu *vcpu);
+
+bool kvm_arm_pvtime_supported(void);
+int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu,
+			    struct kvm_device_attr *attr);
+int kvm_arm_pvtime_get_attr(struct kvm_vcpu *vcpu,
+			    struct kvm_device_attr *attr);
+int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu,
+			    struct kvm_device_attr *attr);
+
+extern unsigned int __ro_after_init kvm_arm_vmid_bits;
+int __init kvm_arm_vmid_alloc_init(void);
+void __init kvm_arm_vmid_alloc_free(void);
+void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid);
+void kvm_arm_vmid_clear_active(void);
+
+static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch)
+{
+	vcpu_arch->steal.base = INVALID_GPA;
+}
+
+static inline bool kvm_arm_is_pvtime_enabled(struct kvm_vcpu_arch *vcpu_arch)
+{
+	return (vcpu_arch->steal.base != INVALID_GPA);
+}
+
+void kvm_set_sei_esr(struct kvm_vcpu *vcpu, u64 syndrome);
+
+struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
+
+DECLARE_KVM_HYP_PER_CPU(struct kvm_host_data, kvm_host_data);
+
+static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt)
+{
+	/* The host's MPIDR is immutable, so let's set it up at boot time */
+	ctxt_sys_reg(cpu_ctxt, MPIDR_EL1) = read_cpuid_mpidr();
+}
+
+static inline bool kvm_system_needs_idmapped_vectors(void)
+{
+	return cpus_have_const_cap(ARM64_SPECTRE_V3A);
+}
+
+static inline void kvm_arch_sync_events(struct kvm *kvm) {}
+static inline void kvm_arch_sched_in(struct kvm_vcpu *vcpu, int cpu) {}
+
+void kvm_arm_init_debug(void);
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu);
+void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
+void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
+void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
+
+#define kvm_vcpu_os_lock_enabled(vcpu)		\
+	(!!(__vcpu_sys_reg(vcpu, OSLSR_EL1) & OSLSR_EL1_OSLK))
+
+int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr);
+int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr);
+int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr);
+
+int kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
+			       struct kvm_arm_copy_mte_tags *copy_tags);
+int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
+				    struct kvm_arm_counter_offset *offset);
+
+/* Guest/host FPSIMD coordination helpers */
+int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu);
+void kvm_vcpu_unshare_task_fp(struct kvm_vcpu *vcpu);
+
+static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
+{
+	return (!has_vhe() && attr->exclude_host);
+}
+
+/* Flags for host debug state */
+void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu);
+void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu);
+
+#ifdef CONFIG_KVM
+void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr);
+void kvm_clr_pmu_events(u32 clr);
+bool kvm_set_pmuserenr(u64 val);
+#else
+static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
+static inline void kvm_clr_pmu_events(u32 clr) {}
+static inline bool kvm_set_pmuserenr(u64 val)
+{
+	return false;
+}
+#endif
+
+void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu);
+void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu);
+
+int __init kvm_set_ipa_limit(void);
+
+#define __KVM_HAVE_ARCH_VM_ALLOC
+struct kvm *kvm_arch_alloc_vm(void);
+
+#define __KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS
+
+#define __KVM_HAVE_ARCH_FLUSH_REMOTE_TLBS_RANGE
+
+static inline bool kvm_vm_is_protected(struct kvm *kvm)
+{
+	return false;
+}
+
+int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature);
+bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
+
+#define kvm_arm_vcpu_sve_finalized(vcpu) vcpu_get_flag(vcpu, VCPU_SVE_FINALIZED)
+
+#define kvm_has_mte(kvm)					\
+	(system_supports_mte() &&				\
+	 test_bit(KVM_ARCH_FLAG_MTE_ENABLED, &(kvm)->arch.flags))
+
+#define kvm_supports_32bit_el0()				\
+	(system_supports_32bit_el0() &&				\
+	 !static_branch_unlikely(&arm64_mismatched_32bit_el0))
+
+#define kvm_vm_has_ran_once(kvm)					\
+	(test_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &(kvm)->arch.flags))
+
+int kvm_trng_call(struct kvm_vcpu *vcpu);
+#ifdef CONFIG_KVM
+extern phys_addr_t hyp_mem_base;
+extern phys_addr_t hyp_mem_size;
+void __init kvm_hyp_reserve(void);
+#else
+static inline void kvm_hyp_reserve(void) { }
+#endif
+
+void kvm_arm_vcpu_power_off(struct kvm_vcpu *vcpu);
+bool kvm_arm_vcpu_stopped(struct kvm_vcpu *vcpu);
+
+#endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
new file mode 100644
index 000000000..66efd67ea
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_HYP_H__
+#define __ARM64_KVM_HYP_H__
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+#include <asm/alternative.h>
+#include <asm/sysreg.h>
+
+DECLARE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
+DECLARE_PER_CPU(unsigned long, kvm_hyp_vector);
+DECLARE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
+
+/*
+ * Unified accessors for registers that have a different encoding
+ * between VHE and non-VHE. They must be specified without their "ELx"
+ * encoding, but with the SYS_ prefix, as defined in asm/sysreg.h.
+ */
+
+#if defined(__KVM_VHE_HYPERVISOR__)
+
+#define read_sysreg_el0(r)	read_sysreg_s(r##_EL02)
+#define write_sysreg_el0(v,r)	write_sysreg_s(v, r##_EL02)
+#define read_sysreg_el1(r)	read_sysreg_s(r##_EL12)
+#define write_sysreg_el1(v,r)	write_sysreg_s(v, r##_EL12)
+#define read_sysreg_el2(r)	read_sysreg_s(r##_EL1)
+#define write_sysreg_el2(v,r)	write_sysreg_s(v, r##_EL1)
+
+#else // !__KVM_VHE_HYPERVISOR__
+
+#if defined(__KVM_NVHE_HYPERVISOR__)
+#define VHE_ALT_KEY	ARM64_KVM_HVHE
+#else
+#define VHE_ALT_KEY	ARM64_HAS_VIRT_HOST_EXTN
+#endif
+
+#define read_sysreg_elx(r,nvh,vh)					\
+	({								\
+		u64 reg;						\
+		asm volatile(ALTERNATIVE(__mrs_s("%0", r##nvh),		\
+					 __mrs_s("%0", r##vh),		\
+					 VHE_ALT_KEY)			\
+			     : "=r" (reg));				\
+		reg;							\
+	})
+
+#define write_sysreg_elx(v,r,nvh,vh)					\
+	do {								\
+		u64 __val = (u64)(v);					\
+		asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"),	\
+					 __msr_s(r##vh, "%x0"),		\
+					 VHE_ALT_KEY)			\
+					 : : "rZ" (__val));		\
+	} while (0)
+
+#define read_sysreg_el0(r)	read_sysreg_elx(r, _EL0, _EL02)
+#define write_sysreg_el0(v,r)	write_sysreg_elx(v, r, _EL0, _EL02)
+#define read_sysreg_el1(r)	read_sysreg_elx(r, _EL1, _EL12)
+#define write_sysreg_el1(v,r)	write_sysreg_elx(v, r, _EL1, _EL12)
+#define read_sysreg_el2(r)	read_sysreg_elx(r, _EL2, _EL1)
+#define write_sysreg_el2(v,r)	write_sysreg_elx(v, r, _EL2, _EL1)
+
+#endif	// __KVM_VHE_HYPERVISOR__
+
+/*
+ * Without an __arch_swab32(), we fall back to ___constant_swab32(), but the
+ * static inline can allow the compiler to out-of-line this. KVM always wants
+ * the macro version as its always inlined.
+ */
+#define __kvm_swab32(x)	___constant_swab32(x)
+
+int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu);
+
+void __vgic_v3_save_state(struct vgic_v3_cpu_if *cpu_if);
+void __vgic_v3_restore_state(struct vgic_v3_cpu_if *cpu_if);
+void __vgic_v3_activate_traps(struct vgic_v3_cpu_if *cpu_if);
+void __vgic_v3_deactivate_traps(struct vgic_v3_cpu_if *cpu_if);
+void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if);
+void __vgic_v3_restore_aprs(struct vgic_v3_cpu_if *cpu_if);
+int __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu);
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+void __timer_enable_traps(struct kvm_vcpu *vcpu);
+void __timer_disable_traps(struct kvm_vcpu *vcpu);
+#endif
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+void __sysreg_save_state_nvhe(struct kvm_cpu_context *ctxt);
+void __sysreg_restore_state_nvhe(struct kvm_cpu_context *ctxt);
+#else
+void sysreg_save_host_state_vhe(struct kvm_cpu_context *ctxt);
+void sysreg_restore_host_state_vhe(struct kvm_cpu_context *ctxt);
+void sysreg_save_guest_state_vhe(struct kvm_cpu_context *ctxt);
+void sysreg_restore_guest_state_vhe(struct kvm_cpu_context *ctxt);
+#endif
+
+void __debug_switch_to_guest(struct kvm_vcpu *vcpu);
+void __debug_switch_to_host(struct kvm_vcpu *vcpu);
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu);
+void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu);
+#endif
+
+void __fpsimd_save_state(struct user_fpsimd_state *fp_regs);
+void __fpsimd_restore_state(struct user_fpsimd_state *fp_regs);
+void __sve_restore_state(void *sve_pffr, u32 *fpsr);
+
+#ifndef __KVM_NVHE_HYPERVISOR__
+void activate_traps_vhe_load(struct kvm_vcpu *vcpu);
+void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu);
+#endif
+
+u64 __guest_enter(struct kvm_vcpu *vcpu);
+
+bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt, u32 func_id);
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+void __noreturn __hyp_do_panic(struct kvm_cpu_context *host_ctxt, u64 spsr,
+			       u64 elr, u64 par);
+#endif
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+void __pkvm_init_switch_pgd(phys_addr_t phys, unsigned long size,
+			    phys_addr_t pgd, void *sp, void *cont_fn);
+int __pkvm_init(phys_addr_t phys, unsigned long size, unsigned long nr_cpus,
+		unsigned long *per_cpu_base, u32 hyp_va_bits);
+void __noreturn __host_enter(struct kvm_cpu_context *host_ctxt);
+#endif
+
+extern u64 kvm_nvhe_sym(id_aa64pfr0_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64pfr1_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64isar0_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64isar1_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64isar2_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64smfr0_el1_sys_val);
+
+extern unsigned long kvm_nvhe_sym(__icache_flags);
+extern unsigned int kvm_nvhe_sym(kvm_arm_vmid_bits);
+
+#endif /* __ARM64_KVM_HYP_H__ */
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
new file mode 100644
index 000000000..96a80e8f6
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -0,0 +1,318 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_MMU_H__
+#define __ARM64_KVM_MMU_H__
+
+#include <asm/page.h>
+#include <asm/memory.h>
+#include <asm/mmu.h>
+#include <asm/cpufeature.h>
+
+/*
+ * As ARMv8.0 only has the TTBR0_EL2 register, we cannot express
+ * "negative" addresses. This makes it impossible to directly share
+ * mappings with the kernel.
+ *
+ * Instead, give the HYP mode its own VA region at a fixed offset from
+ * the kernel by just masking the top bits (which are all ones for a
+ * kernel address). We need to find out how many bits to mask.
+ *
+ * We want to build a set of page tables that cover both parts of the
+ * idmap (the trampoline page used to initialize EL2), and our normal
+ * runtime VA space, at the same time.
+ *
+ * Given that the kernel uses VA_BITS for its entire address space,
+ * and that half of that space (VA_BITS - 1) is used for the linear
+ * mapping, we can also limit the EL2 space to (VA_BITS - 1).
+ *
+ * The main question is "Within the VA_BITS space, does EL2 use the
+ * top or the bottom half of that space to shadow the kernel's linear
+ * mapping?". As we need to idmap the trampoline page, this is
+ * determined by the range in which this page lives.
+ *
+ * If the page is in the bottom half, we have to use the top half. If
+ * the page is in the top half, we have to use the bottom half:
+ *
+ * T = __pa_symbol(__hyp_idmap_text_start)
+ * if (T & BIT(VA_BITS - 1))
+ *	HYP_VA_MIN = 0  //idmap in upper half
+ * else
+ *	HYP_VA_MIN = 1 << (VA_BITS - 1)
+ * HYP_VA_MAX = HYP_VA_MIN + (1 << (VA_BITS - 1)) - 1
+ *
+ * When using VHE, there are no separate hyp mappings and all KVM
+ * functionality is already mapped as part of the main kernel
+ * mappings, and none of this applies in that case.
+ */
+
+#ifdef __ASSEMBLY__
+
+#include <asm/alternative.h>
+
+/*
+ * Convert a kernel VA into a HYP VA.
+ * reg: VA to be converted.
+ *
+ * The actual code generation takes place in kvm_update_va_mask, and
+ * the instructions below are only there to reserve the space and
+ * perform the register allocation (kvm_update_va_mask uses the
+ * specific registers encoded in the instructions).
+ */
+.macro kern_hyp_va	reg
+#ifndef __KVM_VHE_HYPERVISOR__
+alternative_cb ARM64_ALWAYS_SYSTEM, kvm_update_va_mask
+	and     \reg, \reg, #1		/* mask with va_mask */
+	ror	\reg, \reg, #1		/* rotate to the first tag bit */
+	add	\reg, \reg, #0		/* insert the low 12 bits of the tag */
+	add	\reg, \reg, #0, lsl 12	/* insert the top 12 bits of the tag */
+	ror	\reg, \reg, #63		/* rotate back */
+alternative_cb_end
+#endif
+.endm
+
+/*
+ * Convert a hypervisor VA to a PA
+ * reg: hypervisor address to be converted in place
+ * tmp: temporary register
+ */
+.macro hyp_pa reg, tmp
+	ldr_l	\tmp, hyp_physvirt_offset
+	add	\reg, \reg, \tmp
+.endm
+
+/*
+ * Convert a hypervisor VA to a kernel image address
+ * reg: hypervisor address to be converted in place
+ * tmp: temporary register
+ *
+ * The actual code generation takes place in kvm_get_kimage_voffset, and
+ * the instructions below are only there to reserve the space and
+ * perform the register allocation (kvm_get_kimage_voffset uses the
+ * specific registers encoded in the instructions).
+ */
+.macro hyp_kimg_va reg, tmp
+	/* Convert hyp VA -> PA. */
+	hyp_pa	\reg, \tmp
+
+	/* Load kimage_voffset. */
+alternative_cb ARM64_ALWAYS_SYSTEM, kvm_get_kimage_voffset
+	movz	\tmp, #0
+	movk	\tmp, #0, lsl #16
+	movk	\tmp, #0, lsl #32
+	movk	\tmp, #0, lsl #48
+alternative_cb_end
+
+	/* Convert PA -> kimg VA. */
+	add	\reg, \reg, \tmp
+.endm
+
+#else
+
+#include <linux/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_host.h>
+
+void kvm_update_va_mask(struct alt_instr *alt,
+			__le32 *origptr, __le32 *updptr, int nr_inst);
+void kvm_compute_layout(void);
+void kvm_apply_hyp_relocations(void);
+
+#define __hyp_pa(x) (((phys_addr_t)(x)) + hyp_physvirt_offset)
+
+static __always_inline unsigned long __kern_hyp_va(unsigned long v)
+{
+#ifndef __KVM_VHE_HYPERVISOR__
+	asm volatile(ALTERNATIVE_CB("and %0, %0, #1\n"
+				    "ror %0, %0, #1\n"
+				    "add %0, %0, #0\n"
+				    "add %0, %0, #0, lsl 12\n"
+				    "ror %0, %0, #63\n",
+				    ARM64_ALWAYS_SYSTEM,
+				    kvm_update_va_mask)
+		     : "+r" (v));
+#endif
+	return v;
+}
+
+#define kern_hyp_va(v) 	((typeof(v))(__kern_hyp_va((unsigned long)(v))))
+
+/*
+ * We currently support using a VM-specified IPA size. For backward
+ * compatibility, the default IPA size is fixed to 40bits.
+ */
+#define KVM_PHYS_SHIFT	(40)
+
+#define kvm_phys_shift(kvm)		VTCR_EL2_IPA(kvm->arch.vtcr)
+#define kvm_phys_size(kvm)		(_AC(1, ULL) << kvm_phys_shift(kvm))
+#define kvm_phys_mask(kvm)		(kvm_phys_size(kvm) - _AC(1, ULL))
+
+#include <asm/kvm_pgtable.h>
+#include <asm/stage2_pgtable.h>
+
+int kvm_share_hyp(void *from, void *to);
+void kvm_unshare_hyp(void *from, void *to);
+int create_hyp_mappings(void *from, void *to, enum kvm_pgtable_prot prot);
+int __create_hyp_mappings(unsigned long start, unsigned long size,
+			  unsigned long phys, enum kvm_pgtable_prot prot);
+int hyp_alloc_private_va_range(size_t size, unsigned long *haddr);
+int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
+			   void __iomem **kaddr,
+			   void __iomem **haddr);
+int create_hyp_exec_mappings(phys_addr_t phys_addr, size_t size,
+			     void **haddr);
+int create_hyp_stack(phys_addr_t phys_addr, unsigned long *haddr);
+void __init free_hyp_pgds(void);
+
+void stage2_unmap_vm(struct kvm *kvm);
+int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long type);
+void kvm_uninit_stage2_mmu(struct kvm *kvm);
+void kvm_free_stage2_pgd(struct kvm_s2_mmu *mmu);
+int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
+			  phys_addr_t pa, unsigned long size, bool writable);
+
+int kvm_handle_guest_abort(struct kvm_vcpu *vcpu);
+
+phys_addr_t kvm_mmu_get_httbr(void);
+phys_addr_t kvm_get_idmap_vector(void);
+int __init kvm_mmu_init(u32 *hyp_va_bits);
+
+static inline void *__kvm_vector_slot2addr(void *base,
+					   enum arm64_hyp_spectre_vector slot)
+{
+	int idx = slot - (slot != HYP_VECTOR_DIRECT);
+
+	return base + (idx * SZ_2K);
+}
+
+struct kvm;
+
+#define kvm_flush_dcache_to_poc(a,l)	\
+	dcache_clean_inval_poc((unsigned long)(a), (unsigned long)(a)+(l))
+
+static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
+{
+	u64 cache_bits = SCTLR_ELx_M | SCTLR_ELx_C;
+	int reg;
+
+	if (vcpu_is_el2(vcpu))
+		reg = SCTLR_EL2;
+	else
+		reg = SCTLR_EL1;
+
+	return (vcpu_read_sys_reg(vcpu, reg) & cache_bits) == cache_bits;
+}
+
+static inline void __clean_dcache_guest_page(void *va, size_t size)
+{
+	/*
+	 * With FWB, we ensure that the guest always accesses memory using
+	 * cacheable attributes, and we don't have to clean to PoC when
+	 * faulting in pages. Furthermore, FWB implies IDC, so cleaning to
+	 * PoU is not required either in this case.
+	 */
+	if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+		return;
+
+	kvm_flush_dcache_to_poc(va, size);
+}
+
+static inline void __invalidate_icache_guest_page(void *va, size_t size)
+{
+	if (icache_is_aliasing()) {
+		/* any kind of VIPT cache */
+		icache_inval_all_pou();
+	} else if (read_sysreg(CurrentEL) != CurrentEL_EL1 ||
+		   !icache_is_vpipt()) {
+		/* PIPT or VPIPT at EL2 (see comment in __kvm_tlb_flush_vmid_ipa) */
+		icache_inval_pou((unsigned long)va, (unsigned long)va + size);
+	}
+}
+
+void kvm_set_way_flush(struct kvm_vcpu *vcpu);
+void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled);
+
+static inline unsigned int kvm_get_vmid_bits(void)
+{
+	int reg = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+
+	return get_vmid_bits(reg);
+}
+
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+				      gpa_t gpa, void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_read_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
+static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa,
+				       const void *data, unsigned long len)
+{
+	int srcu_idx = srcu_read_lock(&kvm->srcu);
+	int ret = kvm_write_guest(kvm, gpa, data, len);
+
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+	return ret;
+}
+
+#define kvm_phys_to_vttbr(addr)		phys_to_ttbr(addr)
+
+/*
+ * When this is (directly or indirectly) used on the TLB invalidation
+ * path, we rely on a previously issued DSB so that page table updates
+ * and VMID reads are correctly ordered.
+ */
+static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu)
+{
+	struct kvm_vmid *vmid = &mmu->vmid;
+	u64 vmid_field, baddr;
+	u64 cnp = system_supports_cnp() ? VTTBR_CNP_BIT : 0;
+
+	baddr = mmu->pgd_phys;
+	vmid_field = atomic64_read(&vmid->id) << VTTBR_VMID_SHIFT;
+	vmid_field &= VTTBR_VMID_MASK(kvm_arm_vmid_bits);
+	return kvm_phys_to_vttbr(baddr) | vmid_field | cnp;
+}
+
+/*
+ * Must be called from hyp code running at EL2 with an updated VTTBR
+ * and interrupts disabled.
+ */
+static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu,
+					  struct kvm_arch *arch)
+{
+	write_sysreg(arch->vtcr, vtcr_el2);
+	write_sysreg(kvm_get_vttbr(mmu), vttbr_el2);
+
+	/*
+	 * ARM errata 1165522 and 1530923 require the actual execution of the
+	 * above before we can switch to the EL1/EL0 translation regime used by
+	 * the guest.
+	 */
+	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));
+}
+
+static inline struct kvm *kvm_s2_mmu_to_kvm(struct kvm_s2_mmu *mmu)
+{
+	return container_of(mmu->arch, struct kvm, arch);
+}
+#endif /* __ASSEMBLY__ */
+#endif /* __ARM64_KVM_MMU_H__ */
diff --git a/arch/arm64/include/asm/kvm_mte.h b/arch/arm64/include/asm/kvm_mte.h
new file mode 100644
index 000000000..de002636e
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_mte.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 ARM Ltd.
+ */
+#ifndef __ASM_KVM_MTE_H
+#define __ASM_KVM_MTE_H
+
+#ifdef __ASSEMBLY__
+
+#include <asm/sysreg.h>
+
+#ifdef CONFIG_ARM64_MTE
+
+.macro mte_switch_to_guest g_ctxt, h_ctxt, reg1
+alternative_if_not ARM64_MTE
+	b	.L__skip_switch\@
+alternative_else_nop_endif
+	mrs	\reg1, hcr_el2
+	tbz	\reg1, #(HCR_ATA_SHIFT), .L__skip_switch\@
+
+	mrs_s	\reg1, SYS_RGSR_EL1
+	str	\reg1, [\h_ctxt, #CPU_RGSR_EL1]
+	mrs_s	\reg1, SYS_GCR_EL1
+	str	\reg1, [\h_ctxt, #CPU_GCR_EL1]
+
+	ldr	\reg1, [\g_ctxt, #CPU_RGSR_EL1]
+	msr_s	SYS_RGSR_EL1, \reg1
+	ldr	\reg1, [\g_ctxt, #CPU_GCR_EL1]
+	msr_s	SYS_GCR_EL1, \reg1
+
+.L__skip_switch\@:
+.endm
+
+.macro mte_switch_to_hyp g_ctxt, h_ctxt, reg1
+alternative_if_not ARM64_MTE
+	b	.L__skip_switch\@
+alternative_else_nop_endif
+	mrs	\reg1, hcr_el2
+	tbz	\reg1, #(HCR_ATA_SHIFT), .L__skip_switch\@
+
+	mrs_s	\reg1, SYS_RGSR_EL1
+	str	\reg1, [\g_ctxt, #CPU_RGSR_EL1]
+	mrs_s	\reg1, SYS_GCR_EL1
+	str	\reg1, [\g_ctxt, #CPU_GCR_EL1]
+
+	ldr	\reg1, [\h_ctxt, #CPU_RGSR_EL1]
+	msr_s	SYS_RGSR_EL1, \reg1
+	ldr	\reg1, [\h_ctxt, #CPU_GCR_EL1]
+	msr_s	SYS_GCR_EL1, \reg1
+
+	isb
+
+.L__skip_switch\@:
+.endm
+
+#else /* !CONFIG_ARM64_MTE */
+
+.macro mte_switch_to_guest g_ctxt, h_ctxt, reg1
+.endm
+
+.macro mte_switch_to_hyp g_ctxt, h_ctxt, reg1
+.endm
+
+#endif /* CONFIG_ARM64_MTE */
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_KVM_MTE_H */
diff --git a/arch/arm64/include/asm/kvm_nested.h b/arch/arm64/include/asm/kvm_nested.h
new file mode 100644
index 000000000..fa23cc9c2
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_nested.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ARM64_KVM_NESTED_H
+#define __ARM64_KVM_NESTED_H
+
+#include <linux/kvm_host.h>
+
+static inline bool vcpu_has_nv(const struct kvm_vcpu *vcpu)
+{
+	return (!__is_defined(__KVM_NVHE_HYPERVISOR__) &&
+		cpus_have_final_cap(ARM64_HAS_NESTED_VIRT) &&
+		test_bit(KVM_ARM_VCPU_HAS_EL2, vcpu->arch.features));
+}
+
+extern bool __check_nv_sr_forward(struct kvm_vcpu *vcpu);
+
+struct sys_reg_params;
+struct sys_reg_desc;
+
+void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r);
+
+#endif /* __ARM64_KVM_NESTED_H */
diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
new file mode 100644
index 000000000..d3e354bb8
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@@ -0,0 +1,759 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Will Deacon <will@kernel.org>
+ */
+
+#ifndef __ARM64_KVM_PGTABLE_H__
+#define __ARM64_KVM_PGTABLE_H__
+
+#include <linux/bits.h>
+#include <linux/kvm_host.h>
+#include <linux/types.h>
+
+#define KVM_PGTABLE_MAX_LEVELS		4U
+
+/*
+ * The largest supported block sizes for KVM (no 52-bit PA support):
+ *  - 4K (level 1):	1GB
+ *  - 16K (level 2):	32MB
+ *  - 64K (level 2):	512MB
+ */
+#ifdef CONFIG_ARM64_4K_PAGES
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	1U
+#else
+#define KVM_PGTABLE_MIN_BLOCK_LEVEL	2U
+#endif
+
+static inline u64 kvm_get_parange(u64 mmfr0)
+{
+	u64 parange = cpuid_feature_extract_unsigned_field(mmfr0,
+				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
+	if (parange > ID_AA64MMFR0_EL1_PARANGE_MAX)
+		parange = ID_AA64MMFR0_EL1_PARANGE_MAX;
+
+	return parange;
+}
+
+typedef u64 kvm_pte_t;
+
+#define KVM_PTE_VALID			BIT(0)
+
+#define KVM_PTE_ADDR_MASK		GENMASK(47, PAGE_SHIFT)
+#define KVM_PTE_ADDR_51_48		GENMASK(15, 12)
+
+#define KVM_PHYS_INVALID		(-1ULL)
+
+static inline bool kvm_pte_valid(kvm_pte_t pte)
+{
+	return pte & KVM_PTE_VALID;
+}
+
+static inline u64 kvm_pte_to_phys(kvm_pte_t pte)
+{
+	u64 pa = pte & KVM_PTE_ADDR_MASK;
+
+	if (PAGE_SHIFT == 16)
+		pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+
+	return pa;
+}
+
+static inline kvm_pte_t kvm_phys_to_pte(u64 pa)
+{
+	kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK;
+
+	if (PAGE_SHIFT == 16) {
+		pa &= GENMASK(51, 48);
+		pte |= FIELD_PREP(KVM_PTE_ADDR_51_48, pa >> 48);
+	}
+
+	return pte;
+}
+
+static inline kvm_pfn_t kvm_pte_to_pfn(kvm_pte_t pte)
+{
+	return __phys_to_pfn(kvm_pte_to_phys(pte));
+}
+
+static inline u64 kvm_granule_shift(u32 level)
+{
+	/* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */
+	return ARM64_HW_PGTABLE_LEVEL_SHIFT(level);
+}
+
+static inline u64 kvm_granule_size(u32 level)
+{
+	return BIT(kvm_granule_shift(level));
+}
+
+static inline bool kvm_level_supports_block_mapping(u32 level)
+{
+	return level >= KVM_PGTABLE_MIN_BLOCK_LEVEL;
+}
+
+static inline u32 kvm_supported_block_sizes(void)
+{
+	u32 level = KVM_PGTABLE_MIN_BLOCK_LEVEL;
+	u32 r = 0;
+
+	for (; level < KVM_PGTABLE_MAX_LEVELS; level++)
+		r |= BIT(kvm_granule_shift(level));
+
+	return r;
+}
+
+static inline bool kvm_is_block_size_supported(u64 size)
+{
+	bool is_power_of_two = IS_ALIGNED(size, size);
+
+	return is_power_of_two && (size & kvm_supported_block_sizes());
+}
+
+/**
+ * struct kvm_pgtable_mm_ops - Memory management callbacks.
+ * @zalloc_page:		Allocate a single zeroed memory page.
+ *				The @arg parameter can be used by the walker
+ *				to pass a memcache. The initial refcount of
+ *				the page is 1.
+ * @zalloc_pages_exact:		Allocate an exact number of zeroed memory pages.
+ *				The @size parameter is in bytes, and is rounded
+ *				up to the next page boundary. The resulting
+ *				allocation is physically contiguous.
+ * @free_pages_exact:		Free an exact number of memory pages previously
+ *				allocated by zalloc_pages_exact.
+ * @free_unlinked_table:	Free an unlinked paging structure by unlinking and
+ *				dropping references.
+ * @get_page:			Increment the refcount on a page.
+ * @put_page:			Decrement the refcount on a page. When the
+ *				refcount reaches 0 the page is automatically
+ *				freed.
+ * @page_count:			Return the refcount of a page.
+ * @phys_to_virt:		Convert a physical address into a virtual
+ *				address	mapped in the current context.
+ * @virt_to_phys:		Convert a virtual address mapped in the current
+ *				context into a physical address.
+ * @dcache_clean_inval_poc:	Clean and invalidate the data cache to the PoC
+ *				for the	specified memory address range.
+ * @icache_inval_pou:		Invalidate the instruction cache to the PoU
+ *				for the specified memory address range.
+ */
+struct kvm_pgtable_mm_ops {
+	void*		(*zalloc_page)(void *arg);
+	void*		(*zalloc_pages_exact)(size_t size);
+	void		(*free_pages_exact)(void *addr, size_t size);
+	void		(*free_unlinked_table)(void *addr, u32 level);
+	void		(*get_page)(void *addr);
+	void		(*put_page)(void *addr);
+	int		(*page_count)(void *addr);
+	void*		(*phys_to_virt)(phys_addr_t phys);
+	phys_addr_t	(*virt_to_phys)(void *addr);
+	void		(*dcache_clean_inval_poc)(void *addr, size_t size);
+	void		(*icache_inval_pou)(void *addr, size_t size);
+};
+
+/**
+ * enum kvm_pgtable_stage2_flags - Stage-2 page-table flags.
+ * @KVM_PGTABLE_S2_NOFWB:	Don't enforce Normal-WB even if the CPUs have
+ *				ARM64_HAS_STAGE2_FWB.
+ * @KVM_PGTABLE_S2_IDMAP:	Only use identity mappings.
+ */
+enum kvm_pgtable_stage2_flags {
+	KVM_PGTABLE_S2_NOFWB			= BIT(0),
+	KVM_PGTABLE_S2_IDMAP			= BIT(1),
+};
+
+/**
+ * enum kvm_pgtable_prot - Page-table permissions and attributes.
+ * @KVM_PGTABLE_PROT_X:		Execute permission.
+ * @KVM_PGTABLE_PROT_W:		Write permission.
+ * @KVM_PGTABLE_PROT_R:		Read permission.
+ * @KVM_PGTABLE_PROT_DEVICE:	Device attributes.
+ * @KVM_PGTABLE_PROT_SW0:	Software bit 0.
+ * @KVM_PGTABLE_PROT_SW1:	Software bit 1.
+ * @KVM_PGTABLE_PROT_SW2:	Software bit 2.
+ * @KVM_PGTABLE_PROT_SW3:	Software bit 3.
+ */
+enum kvm_pgtable_prot {
+	KVM_PGTABLE_PROT_X			= BIT(0),
+	KVM_PGTABLE_PROT_W			= BIT(1),
+	KVM_PGTABLE_PROT_R			= BIT(2),
+
+	KVM_PGTABLE_PROT_DEVICE			= BIT(3),
+
+	KVM_PGTABLE_PROT_SW0			= BIT(55),
+	KVM_PGTABLE_PROT_SW1			= BIT(56),
+	KVM_PGTABLE_PROT_SW2			= BIT(57),
+	KVM_PGTABLE_PROT_SW3			= BIT(58),
+};
+
+#define KVM_PGTABLE_PROT_RW	(KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W)
+#define KVM_PGTABLE_PROT_RWX	(KVM_PGTABLE_PROT_RW | KVM_PGTABLE_PROT_X)
+
+#define PKVM_HOST_MEM_PROT	KVM_PGTABLE_PROT_RWX
+#define PKVM_HOST_MMIO_PROT	KVM_PGTABLE_PROT_RW
+
+#define PAGE_HYP		KVM_PGTABLE_PROT_RW
+#define PAGE_HYP_EXEC		(KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_X)
+#define PAGE_HYP_RO		(KVM_PGTABLE_PROT_R)
+#define PAGE_HYP_DEVICE		(PAGE_HYP | KVM_PGTABLE_PROT_DEVICE)
+
+typedef bool (*kvm_pgtable_force_pte_cb_t)(u64 addr, u64 end,
+					   enum kvm_pgtable_prot prot);
+
+/**
+ * enum kvm_pgtable_walk_flags - Flags to control a depth-first page-table walk.
+ * @KVM_PGTABLE_WALK_LEAF:		Visit leaf entries, including invalid
+ *					entries.
+ * @KVM_PGTABLE_WALK_TABLE_PRE:		Visit table entries before their
+ *					children.
+ * @KVM_PGTABLE_WALK_TABLE_POST:	Visit table entries after their
+ *					children.
+ * @KVM_PGTABLE_WALK_SHARED:		Indicates the page-tables may be shared
+ *					with other software walkers.
+ * @KVM_PGTABLE_WALK_HANDLE_FAULT:	Indicates the page-table walk was
+ *					invoked from a fault handler.
+ * @KVM_PGTABLE_WALK_SKIP_BBM_TLBI:	Visit and update table entries
+ *					without Break-before-make's
+ *					TLB invalidation.
+ * @KVM_PGTABLE_WALK_SKIP_CMO:		Visit and update table entries
+ *					without Cache maintenance
+ *					operations required.
+ */
+enum kvm_pgtable_walk_flags {
+	KVM_PGTABLE_WALK_LEAF			= BIT(0),
+	KVM_PGTABLE_WALK_TABLE_PRE		= BIT(1),
+	KVM_PGTABLE_WALK_TABLE_POST		= BIT(2),
+	KVM_PGTABLE_WALK_SHARED			= BIT(3),
+	KVM_PGTABLE_WALK_HANDLE_FAULT		= BIT(4),
+	KVM_PGTABLE_WALK_SKIP_BBM_TLBI		= BIT(5),
+	KVM_PGTABLE_WALK_SKIP_CMO		= BIT(6),
+};
+
+struct kvm_pgtable_visit_ctx {
+	kvm_pte_t				*ptep;
+	kvm_pte_t				old;
+	void					*arg;
+	struct kvm_pgtable_mm_ops		*mm_ops;
+	u64					start;
+	u64					addr;
+	u64					end;
+	u32					level;
+	enum kvm_pgtable_walk_flags		flags;
+};
+
+typedef int (*kvm_pgtable_visitor_fn_t)(const struct kvm_pgtable_visit_ctx *ctx,
+					enum kvm_pgtable_walk_flags visit);
+
+static inline bool kvm_pgtable_walk_shared(const struct kvm_pgtable_visit_ctx *ctx)
+{
+	return ctx->flags & KVM_PGTABLE_WALK_SHARED;
+}
+
+/**
+ * struct kvm_pgtable_walker - Hook into a page-table walk.
+ * @cb:		Callback function to invoke during the walk.
+ * @arg:	Argument passed to the callback function.
+ * @flags:	Bitwise-OR of flags to identify the entry types on which to
+ *		invoke the callback function.
+ */
+struct kvm_pgtable_walker {
+	const kvm_pgtable_visitor_fn_t		cb;
+	void * const				arg;
+	const enum kvm_pgtable_walk_flags	flags;
+};
+
+/*
+ * RCU cannot be used in a non-kernel context such as the hyp. As such, page
+ * table walkers used in hyp do not call into RCU and instead use other
+ * synchronization mechanisms (such as a spinlock).
+ */
+#if defined(__KVM_NVHE_HYPERVISOR__) || defined(__KVM_VHE_HYPERVISOR__)
+
+typedef kvm_pte_t *kvm_pteref_t;
+
+static inline kvm_pte_t *kvm_dereference_pteref(struct kvm_pgtable_walker *walker,
+						kvm_pteref_t pteref)
+{
+	return pteref;
+}
+
+static inline int kvm_pgtable_walk_begin(struct kvm_pgtable_walker *walker)
+{
+	/*
+	 * Due to the lack of RCU (or a similar protection scheme), only
+	 * non-shared table walkers are allowed in the hypervisor.
+	 */
+	if (walker->flags & KVM_PGTABLE_WALK_SHARED)
+		return -EPERM;
+
+	return 0;
+}
+
+static inline void kvm_pgtable_walk_end(struct kvm_pgtable_walker *walker) {}
+
+static inline bool kvm_pgtable_walk_lock_held(void)
+{
+	return true;
+}
+
+#else
+
+typedef kvm_pte_t __rcu *kvm_pteref_t;
+
+static inline kvm_pte_t *kvm_dereference_pteref(struct kvm_pgtable_walker *walker,
+						kvm_pteref_t pteref)
+{
+	return rcu_dereference_check(pteref, !(walker->flags & KVM_PGTABLE_WALK_SHARED));
+}
+
+static inline int kvm_pgtable_walk_begin(struct kvm_pgtable_walker *walker)
+{
+	if (walker->flags & KVM_PGTABLE_WALK_SHARED)
+		rcu_read_lock();
+
+	return 0;
+}
+
+static inline void kvm_pgtable_walk_end(struct kvm_pgtable_walker *walker)
+{
+	if (walker->flags & KVM_PGTABLE_WALK_SHARED)
+		rcu_read_unlock();
+}
+
+static inline bool kvm_pgtable_walk_lock_held(void)
+{
+	return rcu_read_lock_held();
+}
+
+#endif
+
+/**
+ * struct kvm_pgtable - KVM page-table.
+ * @ia_bits:		Maximum input address size, in bits.
+ * @start_level:	Level at which the page-table walk starts.
+ * @pgd:		Pointer to the first top-level entry of the page-table.
+ * @mm_ops:		Memory management callbacks.
+ * @mmu:		Stage-2 KVM MMU struct. Unused for stage-1 page-tables.
+ * @flags:		Stage-2 page-table flags.
+ * @force_pte_cb:	Function that returns true if page level mappings must
+ *			be used instead of block mappings.
+ */
+struct kvm_pgtable {
+	u32					ia_bits;
+	u32					start_level;
+	kvm_pteref_t				pgd;
+	struct kvm_pgtable_mm_ops		*mm_ops;
+
+	/* Stage-2 only */
+	struct kvm_s2_mmu			*mmu;
+	enum kvm_pgtable_stage2_flags		flags;
+	kvm_pgtable_force_pte_cb_t		force_pte_cb;
+};
+
+/**
+ * kvm_pgtable_hyp_init() - Initialise a hypervisor stage-1 page-table.
+ * @pgt:	Uninitialised page-table structure to initialise.
+ * @va_bits:	Maximum virtual address bits.
+ * @mm_ops:	Memory management callbacks.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits,
+			 struct kvm_pgtable_mm_ops *mm_ops);
+
+/**
+ * kvm_pgtable_hyp_destroy() - Destroy an unused hypervisor stage-1 page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_hyp_init().
+ *
+ * The page-table is assumed to be unreachable by any hardware walkers prior
+ * to freeing and therefore no TLB invalidation is performed.
+ */
+void kvm_pgtable_hyp_destroy(struct kvm_pgtable *pgt);
+
+/**
+ * kvm_pgtable_hyp_map() - Install a mapping in a hypervisor stage-1 page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_hyp_init().
+ * @addr:	Virtual address at which to place the mapping.
+ * @size:	Size of the mapping.
+ * @phys:	Physical address of the memory to map.
+ * @prot:	Permissions and attributes for the mapping.
+ *
+ * The offset of @addr within a page is ignored, @size is rounded-up to
+ * the next page boundary and @phys is rounded-down to the previous page
+ * boundary.
+ *
+ * If device attributes are not explicitly requested in @prot, then the
+ * mapping will be normal, cacheable. Attempts to install a new mapping
+ * for a virtual address that is already mapped will be rejected with an
+ * error and a WARN().
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_hyp_map(struct kvm_pgtable *pgt, u64 addr, u64 size, u64 phys,
+			enum kvm_pgtable_prot prot);
+
+/**
+ * kvm_pgtable_hyp_unmap() - Remove a mapping from a hypervisor stage-1 page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_hyp_init().
+ * @addr:	Virtual address from which to remove the mapping.
+ * @size:	Size of the mapping.
+ *
+ * The offset of @addr within a page is ignored, @size is rounded-up to
+ * the next page boundary and @phys is rounded-down to the previous page
+ * boundary.
+ *
+ * TLB invalidation is performed for each page-table entry cleared during the
+ * unmapping operation and the reference count for the page-table page
+ * containing the cleared entry is decremented, with unreferenced pages being
+ * freed. The unmapping operation will stop early if it encounters either an
+ * invalid page-table entry or a valid block mapping which maps beyond the range
+ * being unmapped.
+ *
+ * Return: Number of bytes unmapped, which may be 0.
+ */
+u64 kvm_pgtable_hyp_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size);
+
+/**
+ * kvm_get_vtcr() - Helper to construct VTCR_EL2
+ * @mmfr0:	Sanitized value of SYS_ID_AA64MMFR0_EL1 register.
+ * @mmfr1:	Sanitized value of SYS_ID_AA64MMFR1_EL1 register.
+ * @phys_shfit:	Value to set in VTCR_EL2.T0SZ.
+ *
+ * The VTCR value is common across all the physical CPUs on the system.
+ * We use system wide sanitised values to fill in different fields,
+ * except for Hardware Management of Access Flags. HA Flag is set
+ * unconditionally on all CPUs, as it is safe to run with or without
+ * the feature and the bit is RES0 on CPUs that don't support it.
+ *
+ * Return: VTCR_EL2 value
+ */
+u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift);
+
+/**
+ * kvm_pgtable_stage2_pgd_size() - Helper to compute size of a stage-2 PGD
+ * @vtcr:	Content of the VTCR register.
+ *
+ * Return: the size (in bytes) of the stage-2 PGD
+ */
+size_t kvm_pgtable_stage2_pgd_size(u64 vtcr);
+
+/**
+ * __kvm_pgtable_stage2_init() - Initialise a guest stage-2 page-table.
+ * @pgt:	Uninitialised page-table structure to initialise.
+ * @mmu:	S2 MMU context for this S2 translation
+ * @mm_ops:	Memory management callbacks.
+ * @flags:	Stage-2 configuration flags.
+ * @force_pte_cb: Function that returns true if page level mappings must
+ *		be used instead of block mappings.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
+			      struct kvm_pgtable_mm_ops *mm_ops,
+			      enum kvm_pgtable_stage2_flags flags,
+			      kvm_pgtable_force_pte_cb_t force_pte_cb);
+
+#define kvm_pgtable_stage2_init(pgt, mmu, mm_ops) \
+	__kvm_pgtable_stage2_init(pgt, mmu, mm_ops, 0, NULL)
+
+/**
+ * kvm_pgtable_stage2_destroy() - Destroy an unused guest stage-2 page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ *
+ * The page-table is assumed to be unreachable by any hardware walkers prior
+ * to freeing and therefore no TLB invalidation is performed.
+ */
+void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt);
+
+/**
+ * kvm_pgtable_stage2_free_unlinked() - Free an unlinked stage-2 paging structure.
+ * @mm_ops:	Memory management callbacks.
+ * @pgtable:	Unlinked stage-2 paging structure to be freed.
+ * @level:	Level of the stage-2 paging structure to be freed.
+ *
+ * The page-table is assumed to be unreachable by any hardware walkers prior to
+ * freeing and therefore no TLB invalidation is performed.
+ */
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level);
+
+/**
+ * kvm_pgtable_stage2_create_unlinked() - Create an unlinked stage-2 paging structure.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @phys:	Physical address of the memory to map.
+ * @level:	Starting level of the stage-2 paging structure to be created.
+ * @prot:	Permissions and attributes for the mapping.
+ * @mc:		Cache of pre-allocated and zeroed memory from which to allocate
+ *		page-table pages.
+ * @force_pte:  Force mappings to PAGE_SIZE granularity.
+ *
+ * Returns an unlinked page-table tree.  This new page-table tree is
+ * not reachable (i.e., it is unlinked) from the root pgd and it's
+ * therefore unreachableby the hardware page-table walker. No TLB
+ * invalidation or CMOs are performed.
+ *
+ * If device attributes are not explicitly requested in @prot, then the
+ * mapping will be normal, cacheable.
+ *
+ * Return: The fully populated (unlinked) stage-2 paging structure, or
+ * an ERR_PTR(error) on failure.
+ */
+kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
+					      u64 phys, u32 level,
+					      enum kvm_pgtable_prot prot,
+					      void *mc, bool force_pte);
+
+/**
+ * kvm_pgtable_stage2_map() - Install a mapping in a guest stage-2 page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address at which to place the mapping.
+ * @size:	Size of the mapping.
+ * @phys:	Physical address of the memory to map.
+ * @prot:	Permissions and attributes for the mapping.
+ * @mc:		Cache of pre-allocated and zeroed memory from which to allocate
+ *		page-table pages.
+ * @flags:	Flags to control the page-table walk (ex. a shared walk)
+ *
+ * The offset of @addr within a page is ignored, @size is rounded-up to
+ * the next page boundary and @phys is rounded-down to the previous page
+ * boundary.
+ *
+ * If device attributes are not explicitly requested in @prot, then the
+ * mapping will be normal, cacheable.
+ *
+ * Note that the update of a valid leaf PTE in this function will be aborted,
+ * if it's trying to recreate the exact same mapping or only change the access
+ * permissions. Instead, the vCPU will exit one more time from guest if still
+ * needed and then go through the path of relaxing permissions.
+ *
+ * Note that this function will both coalesce existing table entries and split
+ * existing block mappings, relying on page-faults to fault back areas outside
+ * of the new mapping lazily.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			   u64 phys, enum kvm_pgtable_prot prot,
+			   void *mc, enum kvm_pgtable_walk_flags flags);
+
+/**
+ * kvm_pgtable_stage2_set_owner() - Unmap and annotate pages in the IPA space to
+ *				    track ownership.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Base intermediate physical address to annotate.
+ * @size:	Size of the annotated range.
+ * @mc:		Cache of pre-allocated and zeroed memory from which to allocate
+ *		page-table pages.
+ * @owner_id:	Unique identifier for the owner of the page.
+ *
+ * By default, all page-tables are owned by identifier 0. This function can be
+ * used to mark portions of the IPA space as owned by other entities. When a
+ * stage 2 is used with identity-mappings, these annotations allow to use the
+ * page-table data structure as a simple rmap.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
+				 void *mc, u8 owner_id);
+
+/**
+ * kvm_pgtable_stage2_unmap() - Remove a mapping from a guest stage-2 page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address from which to remove the mapping.
+ * @size:	Size of the mapping.
+ *
+ * The offset of @addr within a page is ignored and @size is rounded-up to
+ * the next page boundary.
+ *
+ * TLB invalidation is performed for each page-table entry cleared during the
+ * unmapping operation and the reference count for the page-table page
+ * containing the cleared entry is decremented, with unreferenced pages being
+ * freed. Unmapping a cacheable page will ensure that it is clean to the PoC if
+ * FWB is not supported by the CPU.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size);
+
+/**
+ * kvm_pgtable_stage2_wrprotect() - Write-protect guest stage-2 address range
+ *                                  without TLB invalidation.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address from which to write-protect,
+ * @size:	Size of the range.
+ *
+ * The offset of @addr within a page is ignored and @size is rounded-up to
+ * the next page boundary.
+ *
+ * Note that it is the caller's responsibility to invalidate the TLB after
+ * calling this function to ensure that the updated permissions are visible
+ * to the CPUs.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size);
+
+/**
+ * kvm_pgtable_stage2_mkyoung() - Set the access flag in a page-table entry.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address to identify the page-table entry.
+ *
+ * The offset of @addr within a page is ignored.
+ *
+ * If there is a valid, leaf page-table entry used to translate @addr, then
+ * set the access flag in that entry.
+ *
+ * Return: The old page-table entry prior to setting the flag, 0 on failure.
+ */
+kvm_pte_t kvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr);
+
+/**
+ * kvm_pgtable_stage2_test_clear_young() - Test and optionally clear the access
+ *					   flag in a page-table entry.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address to identify the page-table entry.
+ * @size:	Size of the address range to visit.
+ * @mkold:	True if the access flag should be cleared.
+ *
+ * The offset of @addr within a page is ignored.
+ *
+ * Tests and conditionally clears the access flag for every valid, leaf
+ * page-table entry used to translate the range [@addr, @addr + @size).
+ *
+ * Note that it is the caller's responsibility to invalidate the TLB after
+ * calling this function to ensure that the updated permissions are visible
+ * to the CPUs.
+ *
+ * Return: True if any of the visited PTEs had the access flag set.
+ */
+bool kvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr,
+					 u64 size, bool mkold);
+
+/**
+ * kvm_pgtable_stage2_relax_perms() - Relax the permissions enforced by a
+ *				      page-table entry.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address to identify the page-table entry.
+ * @prot:	Additional permissions to grant for the mapping.
+ *
+ * The offset of @addr within a page is ignored.
+ *
+ * If there is a valid, leaf page-table entry used to translate @addr, then
+ * relax the permissions in that entry according to the read, write and
+ * execute permissions specified by @prot. No permissions are removed, and
+ * TLB invalidation is performed after updating the entry. Software bits cannot
+ * be set or cleared using kvm_pgtable_stage2_relax_perms().
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
+				   enum kvm_pgtable_prot prot);
+
+/**
+ * kvm_pgtable_stage2_flush_range() - Clean and invalidate data cache to Point
+ * 				      of Coherency for guest stage-2 address
+ *				      range.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
+ * @addr:	Intermediate physical address from which to flush.
+ * @size:	Size of the range.
+ *
+ * The offset of @addr within a page is ignored and @size is rounded-up to
+ * the next page boundary.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size);
+
+/**
+ * kvm_pgtable_stage2_split() - Split a range of huge pages into leaf PTEs pointing
+ *				to PAGE_SIZE guest pages.
+ * @pgt:	 Page-table structure initialised by kvm_pgtable_stage2_init().
+ * @addr:	 Intermediate physical address from which to split.
+ * @size:	 Size of the range.
+ * @mc:		 Cache of pre-allocated and zeroed memory from which to allocate
+ *		 page-table pages.
+ *
+ * The function tries to split any level 1 or 2 entry that overlaps
+ * with the input range (given by @addr and @size).
+ *
+ * Return: 0 on success, negative error code on failure. Note that
+ * kvm_pgtable_stage2_split() is best effort: it tries to break as many
+ * blocks in the input range as allowed by @mc_capacity.
+ */
+int kvm_pgtable_stage2_split(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			     struct kvm_mmu_memory_cache *mc);
+
+/**
+ * kvm_pgtable_walk() - Walk a page-table.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_*_init().
+ * @addr:	Input address for the start of the walk.
+ * @size:	Size of the range to walk.
+ * @walker:	Walker callback description.
+ *
+ * The offset of @addr within a page is ignored and @size is rounded-up to
+ * the next page boundary.
+ *
+ * The walker will walk the page-table entries corresponding to the input
+ * address range specified, visiting entries according to the walker flags.
+ * Invalid entries are treated as leaf entries. The visited page table entry is
+ * reloaded after invoking the walker callback, allowing the walker to descend
+ * into a newly installed table.
+ *
+ * Returning a negative error code from the walker callback function will
+ * terminate the walk immediately with the same error code.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
+		     struct kvm_pgtable_walker *walker);
+
+/**
+ * kvm_pgtable_get_leaf() - Walk a page-table and retrieve the leaf entry
+ *			    with its level.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_*_init()
+ *		or a similar initialiser.
+ * @addr:	Input address for the start of the walk.
+ * @ptep:	Pointer to storage for the retrieved PTE.
+ * @level:	Pointer to storage for the level of the retrieved PTE.
+ *
+ * The offset of @addr within a page is ignored.
+ *
+ * The walker will walk the page-table entries corresponding to the input
+ * address specified, retrieving the leaf corresponding to this address.
+ * Invalid entries are treated as leaf entries.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
+			 kvm_pte_t *ptep, u32 *level);
+
+/**
+ * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a
+ *				   stage-2 Page-Table Entry.
+ * @pte:	Page-table entry
+ *
+ * Return: protection attributes of the page-table entry in the enum
+ *	   kvm_pgtable_prot format.
+ */
+enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte);
+
+/**
+ * kvm_pgtable_hyp_pte_prot() - Retrieve the protection attributes of a stage-1
+ *				Page-Table Entry.
+ * @pte:	Page-table entry
+ *
+ * Return: protection attributes of the page-table entry in the enum
+ *	   kvm_pgtable_prot format.
+ */
+enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte);
+
+/**
+ * kvm_tlb_flush_vmid_range() - Invalidate/flush a range of TLB entries
+ *
+ * @mmu:	Stage-2 KVM MMU struct
+ * @addr:	The base Intermediate physical address from which to invalidate
+ * @size:	Size of the range from the base to invalidate
+ */
+void kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
+				phys_addr_t addr, size_t size);
+#endif	/* __ARM64_KVM_PGTABLE_H__ */
diff --git a/arch/arm64/include/asm/kvm_pkvm.h b/arch/arm64/include/asm/kvm_pkvm.h
new file mode 100644
index 000000000..e46250a02
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_pkvm.h
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 - Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+#ifndef __ARM64_KVM_PKVM_H__
+#define __ARM64_KVM_PKVM_H__
+
+#include <linux/arm_ffa.h>
+#include <linux/memblock.h>
+#include <linux/scatterlist.h>
+#include <asm/kvm_pgtable.h>
+
+/* Maximum number of VMs that can co-exist under pKVM. */
+#define KVM_MAX_PVMS 255
+
+#define HYP_MEMBLOCK_REGIONS 128
+
+int pkvm_init_host_vm(struct kvm *kvm);
+int pkvm_create_hyp_vm(struct kvm *kvm);
+void pkvm_destroy_hyp_vm(struct kvm *kvm);
+
+extern struct memblock_region kvm_nvhe_sym(hyp_memory)[];
+extern unsigned int kvm_nvhe_sym(hyp_memblock_nr);
+
+static inline unsigned long
+hyp_vmemmap_memblock_size(struct memblock_region *reg, size_t vmemmap_entry_size)
+{
+	unsigned long nr_pages = reg->size >> PAGE_SHIFT;
+	unsigned long start, end;
+
+	start = (reg->base >> PAGE_SHIFT) * vmemmap_entry_size;
+	end = start + nr_pages * vmemmap_entry_size;
+	start = ALIGN_DOWN(start, PAGE_SIZE);
+	end = ALIGN(end, PAGE_SIZE);
+
+	return end - start;
+}
+
+static inline unsigned long hyp_vmemmap_pages(size_t vmemmap_entry_size)
+{
+	unsigned long res = 0, i;
+
+	for (i = 0; i < kvm_nvhe_sym(hyp_memblock_nr); i++) {
+		res += hyp_vmemmap_memblock_size(&kvm_nvhe_sym(hyp_memory)[i],
+						 vmemmap_entry_size);
+	}
+
+	return res >> PAGE_SHIFT;
+}
+
+static inline unsigned long hyp_vm_table_pages(void)
+{
+	return PAGE_ALIGN(KVM_MAX_PVMS * sizeof(void *)) >> PAGE_SHIFT;
+}
+
+static inline unsigned long __hyp_pgtable_max_pages(unsigned long nr_pages)
+{
+	unsigned long total = 0, i;
+
+	/* Provision the worst case scenario */
+	for (i = 0; i < KVM_PGTABLE_MAX_LEVELS; i++) {
+		nr_pages = DIV_ROUND_UP(nr_pages, PTRS_PER_PTE);
+		total += nr_pages;
+	}
+
+	return total;
+}
+
+static inline unsigned long __hyp_pgtable_total_pages(void)
+{
+	unsigned long res = 0, i;
+
+	/* Cover all of memory with page-granularity */
+	for (i = 0; i < kvm_nvhe_sym(hyp_memblock_nr); i++) {
+		struct memblock_region *reg = &kvm_nvhe_sym(hyp_memory)[i];
+		res += __hyp_pgtable_max_pages(reg->size >> PAGE_SHIFT);
+	}
+
+	return res;
+}
+
+static inline unsigned long hyp_s1_pgtable_pages(void)
+{
+	unsigned long res;
+
+	res = __hyp_pgtable_total_pages();
+
+	/* Allow 1 GiB for private mappings */
+	res += __hyp_pgtable_max_pages(SZ_1G >> PAGE_SHIFT);
+
+	return res;
+}
+
+static inline unsigned long host_s2_pgtable_pages(void)
+{
+	unsigned long res;
+
+	/*
+	 * Include an extra 16 pages to safely upper-bound the worst case of
+	 * concatenated pgds.
+	 */
+	res = __hyp_pgtable_total_pages() + 16;
+
+	/* Allow 1 GiB for MMIO mappings */
+	res += __hyp_pgtable_max_pages(SZ_1G >> PAGE_SHIFT);
+
+	return res;
+}
+
+#define KVM_FFA_MBOX_NR_PAGES	1
+
+static inline unsigned long hyp_ffa_proxy_pages(void)
+{
+	size_t desc_max;
+
+	/*
+	 * The hypervisor FFA proxy needs enough memory to buffer a fragmented
+	 * descriptor returned from EL3 in response to a RETRIEVE_REQ call.
+	 */
+	desc_max = sizeof(struct ffa_mem_region) +
+		   sizeof(struct ffa_mem_region_attributes) +
+		   sizeof(struct ffa_composite_mem_region) +
+		   SG_MAX_SEGMENTS * sizeof(struct ffa_mem_region_addr_range);
+
+	/* Plus a page each for the hypervisor's RX and TX mailboxes. */
+	return (2 * KVM_FFA_MBOX_NR_PAGES) + DIV_ROUND_UP(desc_max, PAGE_SIZE);
+}
+
+#endif	/* __ARM64_KVM_PKVM_H__ */
diff --git a/arch/arm64/include/asm/kvm_ptrauth.h b/arch/arm64/include/asm/kvm_ptrauth.h
new file mode 100644
index 000000000..0cd096525
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_ptrauth.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* arch/arm64/include/asm/kvm_ptrauth.h: Guest/host ptrauth save/restore
+ * Copyright 2019 Arm Limited
+ * Authors: Mark Rutland <mark.rutland@arm.com>
+ *         Amit Daniel Kachhap <amit.kachhap@arm.com>
+ */
+
+#ifndef __ASM_KVM_PTRAUTH_H
+#define __ASM_KVM_PTRAUTH_H
+
+#ifdef __ASSEMBLY__
+
+#include <asm/sysreg.h>
+
+#ifdef	CONFIG_ARM64_PTR_AUTH
+
+#define PTRAUTH_REG_OFFSET(x)	(x - CPU_APIAKEYLO_EL1)
+
+/*
+ * CPU_AP*_EL1 values exceed immediate offset range (512) for stp
+ * instruction so below macros takes CPU_APIAKEYLO_EL1 as base and
+ * calculates the offset of the keys from this base to avoid an extra add
+ * instruction. These macros assumes the keys offsets follow the order of
+ * the sysreg enum in kvm_host.h.
+ */
+.macro	ptrauth_save_state base, reg1, reg2
+	mrs_s	\reg1, SYS_APIAKEYLO_EL1
+	mrs_s	\reg2, SYS_APIAKEYHI_EL1
+	stp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APIAKEYLO_EL1)]
+	mrs_s	\reg1, SYS_APIBKEYLO_EL1
+	mrs_s	\reg2, SYS_APIBKEYHI_EL1
+	stp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APIBKEYLO_EL1)]
+	mrs_s	\reg1, SYS_APDAKEYLO_EL1
+	mrs_s	\reg2, SYS_APDAKEYHI_EL1
+	stp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APDAKEYLO_EL1)]
+	mrs_s	\reg1, SYS_APDBKEYLO_EL1
+	mrs_s	\reg2, SYS_APDBKEYHI_EL1
+	stp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APDBKEYLO_EL1)]
+	mrs_s	\reg1, SYS_APGAKEYLO_EL1
+	mrs_s	\reg2, SYS_APGAKEYHI_EL1
+	stp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APGAKEYLO_EL1)]
+.endm
+
+.macro	ptrauth_restore_state base, reg1, reg2
+	ldp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APIAKEYLO_EL1)]
+	msr_s	SYS_APIAKEYLO_EL1, \reg1
+	msr_s	SYS_APIAKEYHI_EL1, \reg2
+	ldp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APIBKEYLO_EL1)]
+	msr_s	SYS_APIBKEYLO_EL1, \reg1
+	msr_s	SYS_APIBKEYHI_EL1, \reg2
+	ldp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APDAKEYLO_EL1)]
+	msr_s	SYS_APDAKEYLO_EL1, \reg1
+	msr_s	SYS_APDAKEYHI_EL1, \reg2
+	ldp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APDBKEYLO_EL1)]
+	msr_s	SYS_APDBKEYLO_EL1, \reg1
+	msr_s	SYS_APDBKEYHI_EL1, \reg2
+	ldp	\reg1, \reg2, [\base, #PTRAUTH_REG_OFFSET(CPU_APGAKEYLO_EL1)]
+	msr_s	SYS_APGAKEYLO_EL1, \reg1
+	msr_s	SYS_APGAKEYHI_EL1, \reg2
+.endm
+
+/*
+ * Both ptrauth_switch_to_guest and ptrauth_switch_to_hyp macros will
+ * check for the presence ARM64_HAS_ADDRESS_AUTH, which is defined as
+ * (ARM64_HAS_ADDRESS_AUTH_ARCH || ARM64_HAS_ADDRESS_AUTH_IMP_DEF) and
+ * then proceed ahead with the save/restore of Pointer Authentication
+ * key registers if enabled for the guest.
+ */
+.macro ptrauth_switch_to_guest g_ctxt, reg1, reg2, reg3
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+	b	.L__skip_switch\@
+alternative_else_nop_endif
+	mrs	\reg1, hcr_el2
+	and	\reg1, \reg1, #(HCR_API | HCR_APK)
+	cbz	\reg1, .L__skip_switch\@
+	add	\reg1, \g_ctxt, #CPU_APIAKEYLO_EL1
+	ptrauth_restore_state	\reg1, \reg2, \reg3
+.L__skip_switch\@:
+.endm
+
+.macro ptrauth_switch_to_hyp g_ctxt, h_ctxt, reg1, reg2, reg3
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+	b	.L__skip_switch\@
+alternative_else_nop_endif
+	mrs	\reg1, hcr_el2
+	and	\reg1, \reg1, #(HCR_API | HCR_APK)
+	cbz	\reg1, .L__skip_switch\@
+	add	\reg1, \g_ctxt, #CPU_APIAKEYLO_EL1
+	ptrauth_save_state	\reg1, \reg2, \reg3
+	add	\reg1, \h_ctxt, #CPU_APIAKEYLO_EL1
+	ptrauth_restore_state	\reg1, \reg2, \reg3
+	isb
+.L__skip_switch\@:
+.endm
+
+#else /* !CONFIG_ARM64_PTR_AUTH */
+.macro ptrauth_switch_to_guest g_ctxt, reg1, reg2, reg3
+.endm
+.macro ptrauth_switch_to_hyp g_ctxt, h_ctxt, reg1, reg2, reg3
+.endm
+#endif /* CONFIG_ARM64_PTR_AUTH */
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_KVM_PTRAUTH_H */
diff --git a/arch/arm64/include/asm/kvm_ras.h b/arch/arm64/include/asm/kvm_ras.h
new file mode 100644
index 000000000..87e10d9a6
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_ras.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2018 - Arm Ltd */
+
+#ifndef __ARM64_KVM_RAS_H__
+#define __ARM64_KVM_RAS_H__
+
+#include <linux/acpi.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include <asm/acpi.h>
+
+/*
+ * Was this synchronous external abort a RAS notification?
+ * Returns '0' for errors handled by some RAS subsystem, or -ENOENT.
+ */
+static inline int kvm_handle_guest_sea(phys_addr_t addr, u64 esr)
+{
+	/* apei_claim_sea(NULL) expects to mask interrupts itself */
+	lockdep_assert_irqs_enabled();
+
+	return apei_claim_sea(NULL);
+}
+
+#endif /* __ARM64_KVM_RAS_H__ */
diff --git a/arch/arm64/include/asm/kvm_types.h b/arch/arm64/include/asm/kvm_types.h
new file mode 100644
index 000000000..9a126b9e2
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_types.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_KVM_TYPES_H
+#define _ASM_ARM64_KVM_TYPES_H
+
+#define KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE 40
+
+#endif /* _ASM_ARM64_KVM_TYPES_H */
+
diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h
new file mode 100644
index 000000000..d3acd9c87
--- /dev/null
+++ b/arch/arm64/include/asm/linkage.h
@@ -0,0 +1,46 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifdef __ASSEMBLY__
+#include <asm/assembler.h>
+#endif
+
+#define __ALIGN		.balign CONFIG_FUNCTION_ALIGNMENT
+#define __ALIGN_STR	".balign " #CONFIG_FUNCTION_ALIGNMENT
+
+/*
+ * When using in-kernel BTI we need to ensure that PCS-conformant
+ * assembly functions have suitable annotations.  Override
+ * SYM_FUNC_START to insert a BTI landing pad at the start of
+ * everything, the override is done unconditionally so we're more
+ * likely to notice any drift from the overridden definitions.
+ */
+#define SYM_FUNC_START(name)				\
+	SYM_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)	\
+	bti c ;
+
+#define SYM_FUNC_START_NOALIGN(name)			\
+	SYM_START(name, SYM_L_GLOBAL, SYM_A_NONE)	\
+	bti c ;
+
+#define SYM_FUNC_START_LOCAL(name)			\
+	SYM_START(name, SYM_L_LOCAL, SYM_A_ALIGN)	\
+	bti c ;
+
+#define SYM_FUNC_START_LOCAL_NOALIGN(name)		\
+	SYM_START(name, SYM_L_LOCAL, SYM_A_NONE)	\
+	bti c ;
+
+#define SYM_FUNC_START_WEAK(name)			\
+	SYM_START(name, SYM_L_WEAK, SYM_A_ALIGN)	\
+	bti c ;
+
+#define SYM_FUNC_START_WEAK_NOALIGN(name)		\
+	SYM_START(name, SYM_L_WEAK, SYM_A_NONE)		\
+	bti c ;
+
+#define SYM_TYPED_FUNC_START(name)				\
+	SYM_TYPED_START(name, SYM_L_GLOBAL, SYM_A_ALIGN)	\
+	bti c ;
+
+#endif
diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h
new file mode 100644
index 000000000..cbbcdc35c
--- /dev/null
+++ b/arch/arm64/include/asm/lse.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_LSE_H
+#define __ASM_LSE_H
+
+#include <asm/atomic_ll_sc.h>
+
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+
+#define __LSE_PREAMBLE	".arch_extension lse\n"
+
+#include <linux/compiler_types.h>
+#include <linux/export.h>
+#include <linux/stringify.h>
+#include <asm/alternative.h>
+#include <asm/alternative-macros.h>
+#include <asm/atomic_lse.h>
+#include <asm/cpucaps.h>
+
+static __always_inline bool system_uses_lse_atomics(void)
+{
+	return alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS);
+}
+
+#define __lse_ll_sc_body(op, ...)					\
+({									\
+	system_uses_lse_atomics() ?					\
+		__lse_##op(__VA_ARGS__) :				\
+		__ll_sc_##op(__VA_ARGS__);				\
+})
+
+/* In-line patching at runtime */
+#define ARM64_LSE_ATOMIC_INSN(llsc, lse)				\
+	ALTERNATIVE(llsc, __LSE_PREAMBLE lse, ARM64_HAS_LSE_ATOMICS)
+
+#else	/* CONFIG_ARM64_LSE_ATOMICS */
+
+static inline bool system_uses_lse_atomics(void) { return false; }
+
+#define __lse_ll_sc_body(op, ...)		__ll_sc_##op(__VA_ARGS__)
+
+#define ARM64_LSE_ATOMIC_INSN(llsc, lse)	llsc
+
+#endif	/* CONFIG_ARM64_LSE_ATOMICS */
+#endif	/* __ASM_LSE_H */
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
new file mode 100644
index 000000000..fde4186cc
--- /dev/null
+++ b/arch/arm64/include/asm/memory.h
@@ -0,0 +1,412 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/memory.h
+ *
+ * Copyright (C) 2000-2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_MEMORY_H
+#define __ASM_MEMORY_H
+
+#include <linux/const.h>
+#include <linux/sizes.h>
+#include <asm/page-def.h>
+
+/*
+ * Size of the PCI I/O space. This must remain a power of two so that
+ * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses.
+ */
+#define PCI_IO_SIZE		SZ_16M
+
+/*
+ * VMEMMAP_SIZE - allows the whole linear region to be covered by
+ *                a struct page array
+ *
+ * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE
+ * needs to cover the memory region from the beginning of the 52-bit
+ * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to
+ * keep a constant PAGE_OFFSET and "fallback" to using the higher end
+ * of the VMEMMAP where 52-bit support is not available in hardware.
+ */
+#define VMEMMAP_SHIFT	(PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT)
+#define VMEMMAP_SIZE	((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) >> VMEMMAP_SHIFT)
+
+/*
+ * PAGE_OFFSET - the virtual address of the start of the linear map, at the
+ *               start of the TTBR1 address space.
+ * PAGE_END - the end of the linear map, where all other kernel mappings begin.
+ * KIMAGE_VADDR - the virtual address of the start of the kernel image.
+ * VA_BITS - the maximum number of bits for virtual addresses.
+ */
+#define VA_BITS			(CONFIG_ARM64_VA_BITS)
+#define _PAGE_OFFSET(va)	(-(UL(1) << (va)))
+#define PAGE_OFFSET		(_PAGE_OFFSET(VA_BITS))
+#define KIMAGE_VADDR		(MODULES_END)
+#define MODULES_END		(MODULES_VADDR + MODULES_VSIZE)
+#define MODULES_VADDR		(_PAGE_END(VA_BITS_MIN))
+#define MODULES_VSIZE		(SZ_2G)
+#define VMEMMAP_START		(-(UL(1) << (VA_BITS - VMEMMAP_SHIFT)))
+#define VMEMMAP_END		(VMEMMAP_START + VMEMMAP_SIZE)
+#define PCI_IO_END		(VMEMMAP_START - SZ_8M)
+#define PCI_IO_START		(PCI_IO_END - PCI_IO_SIZE)
+#define FIXADDR_TOP		(VMEMMAP_START - SZ_32M)
+
+#if VA_BITS > 48
+#define VA_BITS_MIN		(48)
+#else
+#define VA_BITS_MIN		(VA_BITS)
+#endif
+
+#define _PAGE_END(va)		(-(UL(1) << ((va) - 1)))
+
+#define KERNEL_START		_text
+#define KERNEL_END		_end
+
+/*
+ * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
+ * address space for the shadow region respectively. They can bloat the stack
+ * significantly, so double the (minimum) stack size when they are in use.
+ */
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+#define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
+#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
+					+ KASAN_SHADOW_OFFSET)
+#define PAGE_END		(KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT)))
+#define KASAN_THREAD_SHIFT	1
+#else
+#define KASAN_THREAD_SHIFT	0
+#define PAGE_END		(_PAGE_END(VA_BITS_MIN))
+#endif /* CONFIG_KASAN */
+
+#define MIN_THREAD_SHIFT	(14 + KASAN_THREAD_SHIFT)
+
+/*
+ * VMAP'd stacks are allocated at page granularity, so we must ensure that such
+ * stacks are a multiple of page size.
+ */
+#if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
+#define THREAD_SHIFT		PAGE_SHIFT
+#else
+#define THREAD_SHIFT		MIN_THREAD_SHIFT
+#endif
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+#endif
+
+#define THREAD_SIZE		(UL(1) << THREAD_SHIFT)
+
+/*
+ * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
+ * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
+ * assembly.
+ */
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN		(2 * THREAD_SIZE)
+#else
+#define THREAD_ALIGN		THREAD_SIZE
+#endif
+
+#define IRQ_STACK_SIZE		THREAD_SIZE
+
+#define OVERFLOW_STACK_SIZE	SZ_4K
+
+/*
+ * With the minimum frame size of [x29, x30], exactly half the combined
+ * sizes of the hyp and overflow stacks is the maximum size needed to
+ * save the unwinded stacktrace; plus an additional entry to delimit the
+ * end.
+ */
+#define NVHE_STACKTRACE_SIZE	((OVERFLOW_STACK_SIZE + PAGE_SIZE) / 2 + sizeof(long))
+
+/*
+ * Alignment of kernel segments (e.g. .text, .data).
+ *
+ *  4 KB granule:  16 level 3 entries, with contiguous bit
+ * 16 KB granule:   4 level 3 entries, without contiguous bit
+ * 64 KB granule:   1 level 3 entry
+ */
+#define SEGMENT_ALIGN		SZ_64K
+
+/*
+ * Memory types available.
+ *
+ * IMPORTANT: MT_NORMAL must be index 0 since vm_get_page_prot() may 'or' in
+ *	      the MT_NORMAL_TAGGED memory type for PROT_MTE mappings. Note
+ *	      that protection_map[] only contains MT_NORMAL attributes.
+ */
+#define MT_NORMAL		0
+#define MT_NORMAL_TAGGED	1
+#define MT_NORMAL_NC		2
+#define MT_DEVICE_nGnRnE	3
+#define MT_DEVICE_nGnRE		4
+
+/*
+ * Memory types for Stage-2 translation
+ */
+#define MT_S2_NORMAL		0xf
+#define MT_S2_DEVICE_nGnRE	0x1
+
+/*
+ * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001
+ * Stage-2 enforces Normal-WB and Device-nGnRE
+ */
+#define MT_S2_FWB_NORMAL	6
+#define MT_S2_FWB_DEVICE_nGnRE	1
+
+#ifdef CONFIG_ARM64_4K_PAGES
+#define IOREMAP_MAX_ORDER	(PUD_SHIFT)
+#else
+#define IOREMAP_MAX_ORDER	(PMD_SHIFT)
+#endif
+
+/*
+ *  Open-coded (swapper_pg_dir - reserved_pg_dir) as this cannot be calculated
+ *  until link time.
+ */
+#define RESERVED_SWAPPER_OFFSET	(PAGE_SIZE)
+
+/*
+ *  Open-coded (swapper_pg_dir - tramp_pg_dir) as this cannot be calculated
+ *  until link time.
+ */
+#define TRAMP_SWAPPER_OFFSET	(2 * PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/mmdebug.h>
+#include <linux/types.h>
+#include <asm/boot.h>
+#include <asm/bug.h>
+
+#if VA_BITS > 48
+extern u64			vabits_actual;
+#else
+#define vabits_actual		((u64)VA_BITS)
+#endif
+
+extern s64			memstart_addr;
+/* PHYS_OFFSET - the physical address of the start of memory. */
+#define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
+
+/* the virtual base of the kernel image */
+extern u64			kimage_vaddr;
+
+/* the offset between the kernel virtual and physical mappings */
+extern u64			kimage_voffset;
+
+static inline unsigned long kaslr_offset(void)
+{
+	return kimage_vaddr - KIMAGE_VADDR;
+}
+
+#ifdef CONFIG_RANDOMIZE_BASE
+void kaslr_init(void);
+static inline bool kaslr_enabled(void)
+{
+	extern bool __kaslr_is_enabled;
+	return __kaslr_is_enabled;
+}
+#else
+static inline void kaslr_init(void) { }
+static inline bool kaslr_enabled(void) { return false; }
+#endif
+
+/*
+ * Allow all memory at the discovery stage. We will clip it later.
+ */
+#define MIN_MEMBLOCK_ADDR	0
+#define MAX_MEMBLOCK_ADDR	U64_MAX
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * When dealing with data aborts, watchpoints, or instruction traps we may end
+ * up with a tagged userland pointer. Clear the tag to get a sane pointer to
+ * pass on to access_ok(), for instance.
+ */
+#define __untagged_addr(addr)	\
+	((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
+
+#define untagged_addr(addr)	({					\
+	u64 __addr = (__force u64)(addr);					\
+	__addr &= __untagged_addr(__addr);				\
+	(__force __typeof__(addr))__addr;				\
+})
+
+#if defined(CONFIG_KASAN_SW_TAGS) || defined(CONFIG_KASAN_HW_TAGS)
+#define __tag_shifted(tag)	((u64)(tag) << 56)
+#define __tag_reset(addr)	__untagged_addr(addr)
+#define __tag_get(addr)		(__u8)((u64)(addr) >> 56)
+#else
+#define __tag_shifted(tag)	0UL
+#define __tag_reset(addr)	(addr)
+#define __tag_get(addr)		0
+#endif /* CONFIG_KASAN_SW_TAGS || CONFIG_KASAN_HW_TAGS */
+
+static inline const void *__tag_set(const void *addr, u8 tag)
+{
+	u64 __addr = (u64)addr & ~__tag_shifted(0xff);
+	return (const void *)(__addr | __tag_shifted(tag));
+}
+
+#ifdef CONFIG_KASAN_HW_TAGS
+#define arch_enable_tag_checks_sync()		mte_enable_kernel_sync()
+#define arch_enable_tag_checks_async()		mte_enable_kernel_async()
+#define arch_enable_tag_checks_asymm()		mte_enable_kernel_asymm()
+#define arch_suppress_tag_checks_start()	mte_enable_tco()
+#define arch_suppress_tag_checks_stop()		mte_disable_tco()
+#define arch_force_async_tag_fault()		mte_check_tfsr_exit()
+#define arch_get_random_tag()			mte_get_random_tag()
+#define arch_get_mem_tag(addr)			mte_get_mem_tag(addr)
+#define arch_set_mem_tag_range(addr, size, tag, init)	\
+			mte_set_mem_tag_range((addr), (size), (tag), (init))
+#endif /* CONFIG_KASAN_HW_TAGS */
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+
+/*
+ * Check whether an arbitrary address is within the linear map, which
+ * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
+ * kernel's TTBR1 address range.
+ */
+#define __is_lm_address(addr)	(((u64)(addr) - PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
+
+#define __lm_to_phys(addr)	(((addr) - PAGE_OFFSET) + PHYS_OFFSET)
+#define __kimg_to_phys(addr)	((addr) - kimage_voffset)
+
+#define __virt_to_phys_nodebug(x) ({					\
+	phys_addr_t __x = (phys_addr_t)(__tag_reset(x));		\
+	__is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x);	\
+})
+
+#define __pa_symbol_nodebug(x)	__kimg_to_phys((phys_addr_t)(x))
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern phys_addr_t __virt_to_phys(unsigned long x);
+extern phys_addr_t __phys_addr_symbol(unsigned long x);
+#else
+#define __virt_to_phys(x)	__virt_to_phys_nodebug(x)
+#define __phys_addr_symbol(x)	__pa_symbol_nodebug(x)
+#endif /* CONFIG_DEBUG_VIRTUAL */
+
+#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
+#define __phys_to_kimg(x)	((unsigned long)((x) + kimage_voffset))
+
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
+/*
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+#define virt_to_phys virt_to_phys
+static inline phys_addr_t virt_to_phys(const volatile void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+#define phys_to_virt phys_to_virt
+static inline void *phys_to_virt(phys_addr_t x)
+{
+	return (void *)(__phys_to_virt(x));
+}
+
+/* Needed already here for resolving __phys_to_pfn() in virt_to_pfn() */
+#include <asm-generic/memory_model.h>
+
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __phys_to_pfn(virt_to_phys(kaddr));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __pa_symbol(x)		__phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
+#define __pa_nodebug(x)		__virt_to_phys_nodebug((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define sym_to_pfn(x)		__phys_to_pfn(__pa_symbol(x))
+
+/*
+ *  virt_to_page(x)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(x)	indicates whether a virtual address is valid
+ */
+#define ARCH_PFN_OFFSET		((unsigned long)PHYS_PFN_OFFSET)
+
+#if defined(CONFIG_DEBUG_VIRTUAL)
+#define page_to_virt(x)	({						\
+	__typeof__(x) __page = x;					\
+	void *__addr = __va(page_to_phys(__page));			\
+	(void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
+})
+#define virt_to_page(x)		pfn_to_page(virt_to_pfn(x))
+#else
+#define page_to_virt(x)	({						\
+	__typeof__(x) __page = x;					\
+	u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\
+	u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE);			\
+	(void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
+})
+
+#define virt_to_page(x)	({						\
+	u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE;	\
+	u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page));	\
+	(struct page *)__addr;						\
+})
+#endif /* CONFIG_DEBUG_VIRTUAL */
+
+#define virt_addr_valid(addr)	({					\
+	__typeof__(addr) __addr = __tag_reset(addr);			\
+	__is_lm_address(__addr) && pfn_is_map_memory(virt_to_pfn(__addr));	\
+})
+
+void dump_mem_limit(void);
+#endif /* !ASSEMBLY */
+
+/*
+ * Given that the GIC architecture permits ITS implementations that can only be
+ * configured with a LPI table address once, GICv3 systems with many CPUs may
+ * end up reserving a lot of different regions after a kexec for their LPI
+ * tables (one per CPU), as we are forced to reuse the same memory after kexec
+ * (and thus reserve it persistently with EFI beforehand)
+ */
+#if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS)
+# define INIT_MEMBLOCK_RESERVED_REGIONS	(INIT_MEMBLOCK_REGIONS + NR_CPUS + 1)
+#endif
+
+/*
+ * memory regions which marked with flag MEMBLOCK_NOMAP(for example, the memory
+ * of the EFI_UNUSABLE_MEMORY type) may divide a continuous memory block into
+ * multiple parts. As a result, the number of memory regions is large.
+ */
+#ifdef CONFIG_EFI
+#define INIT_MEMBLOCK_MEMORY_REGIONS	(INIT_MEMBLOCK_REGIONS * 8)
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif /* __ASM_MEMORY_H */
diff --git a/arch/arm64/include/asm/mman.h b/arch/arm64/include/asm/mman.h
new file mode 100644
index 000000000..5966ee4a6
--- /dev/null
+++ b/arch/arm64/include/asm/mman.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <uapi/asm/mman.h>
+
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
+	unsigned long pkey __always_unused)
+{
+	unsigned long ret = 0;
+
+	if (system_supports_bti() && (prot & PROT_BTI))
+		ret |= VM_ARM64_BTI;
+
+	if (system_supports_mte() && (prot & PROT_MTE))
+		ret |= VM_MTE;
+
+	return ret;
+}
+#define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey)
+
+static inline unsigned long arch_calc_vm_flag_bits(unsigned long flags)
+{
+	/*
+	 * Only allow MTE on anonymous mappings as these are guaranteed to be
+	 * backed by tags-capable memory. The vm_flags may be overridden by a
+	 * filesystem supporting MTE (RAM-based).
+	 */
+	if (system_supports_mte() && (flags & MAP_ANONYMOUS))
+		return VM_MTE_ALLOWED;
+
+	return 0;
+}
+#define arch_calc_vm_flag_bits(flags) arch_calc_vm_flag_bits(flags)
+
+static inline bool arch_validate_prot(unsigned long prot,
+	unsigned long addr __always_unused)
+{
+	unsigned long supported = PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM;
+
+	if (system_supports_bti())
+		supported |= PROT_BTI;
+
+	if (system_supports_mte())
+		supported |= PROT_MTE;
+
+	return (prot & ~supported) == 0;
+}
+#define arch_validate_prot(prot, addr) arch_validate_prot(prot, addr)
+
+static inline bool arch_validate_flags(unsigned long vm_flags)
+{
+	if (!system_supports_mte())
+		return true;
+
+	/* only allow VM_MTE if VM_MTE_ALLOWED has been set previously */
+	return !(vm_flags & VM_MTE) || (vm_flags & VM_MTE_ALLOWED);
+}
+#define arch_validate_flags(vm_flags) arch_validate_flags(vm_flags)
+
+#endif /* ! __ASM_MMAN_H__ */
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
new file mode 100644
index 000000000..94b68850c
--- /dev/null
+++ b/arch/arm64/include/asm/mmu.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_MMU_H
+#define __ASM_MMU_H
+
+#include <asm/cputype.h>
+
+#define MMCF_AARCH32	0x1	/* mm context flag for AArch32 executables */
+#define USER_ASID_BIT	48
+#define USER_ASID_FLAG	(UL(1) << USER_ASID_BIT)
+#define TTBR_ASID_MASK	(UL(0xffff) << 48)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/refcount.h>
+#include <asm/cpufeature.h>
+
+typedef struct {
+	atomic64_t	id;
+#ifdef CONFIG_COMPAT
+	void		*sigpage;
+#endif
+	refcount_t	pinned;
+	void		*vdso;
+	unsigned long	flags;
+} mm_context_t;
+
+/*
+ * We use atomic64_read() here because the ASID for an 'mm_struct' can
+ * be reallocated when scheduling one of its threads following a
+ * rollover event (see new_context() and flush_context()). In this case,
+ * a concurrent TLBI (e.g. via try_to_unmap_one() and ptep_clear_flush())
+ * may use a stale ASID. This is fine in principle as the new ASID is
+ * guaranteed to be clean in the TLB, but the TLBI routines have to take
+ * care to handle the following race:
+ *
+ *    CPU 0                    CPU 1                          CPU 2
+ *
+ *    // ptep_clear_flush(mm)
+ *    xchg_relaxed(pte, 0)
+ *    DSB ISHST
+ *    old = ASID(mm)
+ *         |                                                  <rollover>
+ *         |                   new = new_context(mm)
+ *         \-----------------> atomic_set(mm->context.id, new)
+ *                             cpu_switch_mm(mm)
+ *                             // Hardware walk of pte using new ASID
+ *    TLBI(old)
+ *
+ * In this scenario, the barrier on CPU 0 and the dependency on CPU 1
+ * ensure that the page-table walker on CPU 1 *must* see the invalid PTE
+ * written by CPU 0.
+ */
+#define ASID(mm)	(atomic64_read(&(mm)->context.id) & 0xffff)
+
+static inline bool arm64_kernel_unmapped_at_el0(void)
+{
+	return cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0);
+}
+
+extern void arm64_memblock_init(void);
+extern void paging_init(void);
+extern void bootmem_init(void);
+extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt);
+extern void create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
+				   phys_addr_t size, pgprot_t prot);
+extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
+			       unsigned long virt, phys_addr_t size,
+			       pgprot_t prot, bool page_mappings_only);
+extern void *fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot);
+extern void mark_linear_text_alias_ro(void);
+extern bool kaslr_requires_kpti(void);
+
+#define INIT_MM_CONTEXT(name)	\
+	.pgd = init_pg_dir,
+
+#endif	/* !__ASSEMBLY__ */
+#endif
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
new file mode 100644
index 000000000..a6fb32542
--- /dev/null
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -0,0 +1,305 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/mmu_context.h
+ *
+ * Copyright (C) 1996 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_MMU_CONTEXT_H
+#define __ASM_MMU_CONTEXT_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/sched/hotplug.h>
+#include <linux/mm_types.h>
+#include <linux/pgtable.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/daifflags.h>
+#include <asm/proc-fns.h>
+#include <asm-generic/mm_hooks.h>
+#include <asm/cputype.h>
+#include <asm/sysreg.h>
+#include <asm/tlbflush.h>
+
+extern bool rodata_full;
+
+static inline void contextidr_thread_switch(struct task_struct *next)
+{
+	if (!IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR))
+		return;
+
+	write_sysreg(task_pid_nr(next), contextidr_el1);
+	isb();
+}
+
+/*
+ * Set TTBR0 to reserved_pg_dir. No translations will be possible via TTBR0.
+ */
+static inline void cpu_set_reserved_ttbr0_nosync(void)
+{
+	unsigned long ttbr = phys_to_ttbr(__pa_symbol(reserved_pg_dir));
+
+	write_sysreg(ttbr, ttbr0_el1);
+}
+
+static inline void cpu_set_reserved_ttbr0(void)
+{
+	cpu_set_reserved_ttbr0_nosync();
+	isb();
+}
+
+void cpu_do_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
+
+static inline void cpu_switch_mm(pgd_t *pgd, struct mm_struct *mm)
+{
+	BUG_ON(pgd == swapper_pg_dir);
+	cpu_do_switch_mm(virt_to_phys(pgd),mm);
+}
+
+/*
+ * TCR.T0SZ value to use when the ID map is active. Usually equals
+ * TCR_T0SZ(VA_BITS), unless system RAM is positioned very high in
+ * physical memory, in which case it will be smaller.
+ */
+extern int idmap_t0sz;
+
+/*
+ * Ensure TCR.T0SZ is set to the provided value.
+ */
+static inline void __cpu_set_tcr_t0sz(unsigned long t0sz)
+{
+	unsigned long tcr = read_sysreg(tcr_el1);
+
+	if ((tcr & TCR_T0SZ_MASK) >> TCR_T0SZ_OFFSET == t0sz)
+		return;
+
+	tcr &= ~TCR_T0SZ_MASK;
+	tcr |= t0sz << TCR_T0SZ_OFFSET;
+	write_sysreg(tcr, tcr_el1);
+	isb();
+}
+
+#define cpu_set_default_tcr_t0sz()	__cpu_set_tcr_t0sz(TCR_T0SZ(vabits_actual))
+#define cpu_set_idmap_tcr_t0sz()	__cpu_set_tcr_t0sz(idmap_t0sz)
+
+/*
+ * Remove the idmap from TTBR0_EL1 and install the pgd of the active mm.
+ *
+ * The idmap lives in the same VA range as userspace, but uses global entries
+ * and may use a different TCR_EL1.T0SZ. To avoid issues resulting from
+ * speculative TLB fetches, we must temporarily install the reserved page
+ * tables while we invalidate the TLBs and set up the correct TCR_EL1.T0SZ.
+ *
+ * If current is a not a user task, the mm covers the TTBR1_EL1 page tables,
+ * which should not be installed in TTBR0_EL1. In this case we can leave the
+ * reserved page tables in place.
+ */
+static inline void cpu_uninstall_idmap(void)
+{
+	struct mm_struct *mm = current->active_mm;
+
+	cpu_set_reserved_ttbr0();
+	local_flush_tlb_all();
+	cpu_set_default_tcr_t0sz();
+
+	if (mm != &init_mm && !system_uses_ttbr0_pan())
+		cpu_switch_mm(mm->pgd, mm);
+}
+
+static inline void __cpu_install_idmap(pgd_t *idmap)
+{
+	cpu_set_reserved_ttbr0();
+	local_flush_tlb_all();
+	cpu_set_idmap_tcr_t0sz();
+
+	cpu_switch_mm(lm_alias(idmap), &init_mm);
+}
+
+static inline void cpu_install_idmap(void)
+{
+	__cpu_install_idmap(idmap_pg_dir);
+}
+
+/*
+ * Load our new page tables. A strict BBM approach requires that we ensure that
+ * TLBs are free of any entries that may overlap with the global mappings we are
+ * about to install.
+ *
+ * For a real hibernate/resume/kexec cycle TTBR0 currently points to a zero
+ * page, but TLBs may contain stale ASID-tagged entries (e.g. for EFI runtime
+ * services), while for a userspace-driven test_resume cycle it points to
+ * userspace page tables (and we must point it at a zero page ourselves).
+ *
+ * We change T0SZ as part of installing the idmap. This is undone by
+ * cpu_uninstall_idmap() in __cpu_suspend_exit().
+ */
+static inline void cpu_install_ttbr0(phys_addr_t ttbr0, unsigned long t0sz)
+{
+	cpu_set_reserved_ttbr0();
+	local_flush_tlb_all();
+	__cpu_set_tcr_t0sz(t0sz);
+
+	/* avoid cpu_switch_mm() and its SW-PAN and CNP interactions */
+	write_sysreg(ttbr0, ttbr0_el1);
+	isb();
+}
+
+/*
+ * Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
+ * avoiding the possibility of conflicting TLB entries being allocated.
+ */
+static inline void cpu_replace_ttbr1(pgd_t *pgdp, pgd_t *idmap)
+{
+	typedef void (ttbr_replace_func)(phys_addr_t);
+	extern ttbr_replace_func idmap_cpu_replace_ttbr1;
+	ttbr_replace_func *replace_phys;
+	unsigned long daif;
+
+	/* phys_to_ttbr() zeros lower 2 bits of ttbr with 52-bit PA */
+	phys_addr_t ttbr1 = phys_to_ttbr(virt_to_phys(pgdp));
+
+	if (system_supports_cnp() && !WARN_ON(pgdp != lm_alias(swapper_pg_dir))) {
+		/*
+		 * cpu_replace_ttbr1() is used when there's a boot CPU
+		 * up (i.e. cpufeature framework is not up yet) and
+		 * latter only when we enable CNP via cpufeature's
+		 * enable() callback.
+		 * Also we rely on the system_cpucaps bit being set before
+		 * calling the enable() function.
+		 */
+		ttbr1 |= TTBR_CNP_BIT;
+	}
+
+	replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1);
+
+	__cpu_install_idmap(idmap);
+
+	/*
+	 * We really don't want to take *any* exceptions while TTBR1 is
+	 * in the process of being replaced so mask everything.
+	 */
+	daif = local_daif_save();
+	replace_phys(ttbr1);
+	local_daif_restore(daif);
+
+	cpu_uninstall_idmap();
+}
+
+/*
+ * It would be nice to return ASIDs back to the allocator, but unfortunately
+ * that introduces a race with a generation rollover where we could erroneously
+ * free an ASID allocated in a future generation. We could workaround this by
+ * freeing the ASID from the context of the dying mm (e.g. in arch_exit_mmap),
+ * but we'd then need to make sure that we didn't dirty any TLBs afterwards.
+ * Setting a reserved TTBR0 or EPD0 would work, but it all gets ugly when you
+ * take CPU migration into account.
+ */
+void check_and_switch_context(struct mm_struct *mm);
+
+#define init_new_context(tsk, mm) init_new_context(tsk, mm)
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	atomic64_set(&mm->context.id, 0);
+	refcount_set(&mm->context.pinned, 0);
+	return 0;
+}
+
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+static inline void update_saved_ttbr0(struct task_struct *tsk,
+				      struct mm_struct *mm)
+{
+	u64 ttbr;
+
+	if (!system_uses_ttbr0_pan())
+		return;
+
+	if (mm == &init_mm)
+		ttbr = phys_to_ttbr(__pa_symbol(reserved_pg_dir));
+	else
+		ttbr = phys_to_ttbr(virt_to_phys(mm->pgd)) | ASID(mm) << 48;
+
+	WRITE_ONCE(task_thread_info(tsk)->ttbr0, ttbr);
+}
+#else
+static inline void update_saved_ttbr0(struct task_struct *tsk,
+				      struct mm_struct *mm)
+{
+}
+#endif
+
+#define enter_lazy_tlb enter_lazy_tlb
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	/*
+	 * We don't actually care about the ttbr0 mapping, so point it at the
+	 * zero page.
+	 */
+	update_saved_ttbr0(tsk, &init_mm);
+}
+
+static inline void __switch_mm(struct mm_struct *next)
+{
+	/*
+	 * init_mm.pgd does not contain any user mappings and it is always
+	 * active for kernel addresses in TTBR1. Just set the reserved TTBR0.
+	 */
+	if (next == &init_mm) {
+		cpu_set_reserved_ttbr0();
+		return;
+	}
+
+	check_and_switch_context(next);
+}
+
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+	if (prev != next)
+		__switch_mm(next);
+
+	/*
+	 * Update the saved TTBR0_EL1 of the scheduled-in task as the previous
+	 * value may have not been initialised yet (activate_mm caller) or the
+	 * ASID has changed since the last run (following the context switch
+	 * of another thread of the same process).
+	 */
+	update_saved_ttbr0(tsk, next);
+}
+
+static inline const struct cpumask *
+task_cpu_possible_mask(struct task_struct *p)
+{
+	if (!static_branch_unlikely(&arm64_mismatched_32bit_el0))
+		return cpu_possible_mask;
+
+	if (!is_compat_thread(task_thread_info(p)))
+		return cpu_possible_mask;
+
+	return system_32bit_el0_cpumask();
+}
+#define task_cpu_possible_mask	task_cpu_possible_mask
+
+void verify_cpu_asid_bits(void);
+void post_ttbr_update_workaround(void);
+
+unsigned long arm64_mm_context_get(struct mm_struct *mm);
+void arm64_mm_context_put(struct mm_struct *mm);
+
+#define mm_untag_mask mm_untag_mask
+static inline unsigned long mm_untag_mask(struct mm_struct *mm)
+{
+	return -1UL >> 8;
+}
+
+#include <asm-generic/mmu_context.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !__ASM_MMU_CONTEXT_H */
diff --git a/arch/arm64/include/asm/mmzone.h b/arch/arm64/include/asm/mmzone.h
new file mode 100644
index 000000000..fa17e01d9
--- /dev/null
+++ b/arch/arm64/include/asm/mmzone.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/numa.h>
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[(nid)])
+
+#endif /* CONFIG_NUMA */
+#endif /* __ASM_MMZONE_H */
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
new file mode 100644
index 000000000..bfa6638b4
--- /dev/null
+++ b/arch/arm64/include/asm/module.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_MODULE_H
+#define __ASM_MODULE_H
+
+#include <asm-generic/module.h>
+
+struct mod_plt_sec {
+	int			plt_shndx;
+	int			plt_num_entries;
+	int			plt_max_entries;
+};
+
+struct mod_arch_specific {
+	struct mod_plt_sec	core;
+	struct mod_plt_sec	init;
+
+	/* for CONFIG_DYNAMIC_FTRACE */
+	struct plt_entry	*ftrace_trampolines;
+};
+
+u64 module_emit_plt_entry(struct module *mod, Elf64_Shdr *sechdrs,
+			  void *loc, const Elf64_Rela *rela,
+			  Elf64_Sym *sym);
+
+u64 module_emit_veneer_for_adrp(struct module *mod, Elf64_Shdr *sechdrs,
+				void *loc, u64 val);
+
+struct plt_entry {
+	/*
+	 * A program that conforms to the AArch64 Procedure Call Standard
+	 * (AAPCS64) must assume that a veneer that alters IP0 (x16) and/or
+	 * IP1 (x17) may be inserted at any branch instruction that is
+	 * exposed to a relocation that supports long branches. Since that
+	 * is exactly what we are dealing with here, we are free to use x16
+	 * as a scratch register in the PLT veneers.
+	 */
+	__le32	adrp;	/* adrp	x16, ....			*/
+	__le32	add;	/* add	x16, x16, #0x....		*/
+	__le32	br;	/* br	x16				*/
+};
+
+static inline bool is_forbidden_offset_for_adrp(void *place)
+{
+	return IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) &&
+	       cpus_have_const_cap(ARM64_WORKAROUND_843419) &&
+	       ((u64)place & 0xfff) >= 0xff8;
+}
+
+struct plt_entry get_plt_entry(u64 dst, void *pc);
+
+static inline const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
+				    const Elf_Shdr *sechdrs,
+				    const char *name)
+{
+	const Elf_Shdr *s, *se;
+	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+	for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) {
+		if (strcmp(name, secstrs + s->sh_name) == 0)
+			return s;
+	}
+
+	return NULL;
+}
+
+#endif /* __ASM_MODULE_H */
diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h
new file mode 100644
index 000000000..b9ae8349e
--- /dev/null
+++ b/arch/arm64/include/asm/module.lds.h
@@ -0,0 +1,26 @@
+SECTIONS {
+	.plt 0 : { BYTE(0) }
+	.init.plt 0 : { BYTE(0) }
+	.text.ftrace_trampoline 0 : { BYTE(0) }
+
+#ifdef CONFIG_KASAN_SW_TAGS
+	/*
+	 * Outlined checks go into comdat-deduplicated sections named .text.hot.
+	 * Because they are in comdats they are not combined by the linker and
+	 * we otherwise end up with multiple sections with the same .text.hot
+	 * name in the .ko file. The kernel module loader warns if it sees
+	 * multiple sections with the same name so we use this sections
+	 * directive to force them into a single section and silence the
+	 * warning.
+	 */
+	.text.hot : { *(.text.hot) }
+#endif
+
+#ifdef CONFIG_UNWIND_TABLES
+	/*
+	 * Currently, we only use unwind info at module load time, so we can
+	 * put it into the .init allocation.
+	 */
+	.init.eh_frame : { *(.eh_frame) }
+#endif
+}
diff --git a/arch/arm64/include/asm/mshyperv.h b/arch/arm64/include/asm/mshyperv.h
new file mode 100644
index 000000000..20070a847
--- /dev/null
+++ b/arch/arm64/include/asm/mshyperv.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * Linux-specific definitions for managing interactions with Microsoft's
+ * Hyper-V hypervisor. The definitions in this file are specific to
+ * the ARM64 architecture.  See include/asm-generic/mshyperv.h for
+ * definitions are that architecture independent.
+ *
+ * Definitions that are specified in the Hyper-V Top Level Functional
+ * Spec (TLFS) should not go in this file, but should instead go in
+ * hyperv-tlfs.h.
+ *
+ * Copyright (C) 2021, Microsoft, Inc.
+ *
+ * Author : Michael Kelley <mikelley@microsoft.com>
+ */
+
+#ifndef _ASM_MSHYPERV_H
+#define _ASM_MSHYPERV_H
+
+#include <linux/types.h>
+#include <linux/arm-smccc.h>
+#include <asm/hyperv-tlfs.h>
+
+/*
+ * Declare calls to get and set Hyper-V VP register values on ARM64, which
+ * requires a hypercall.
+ */
+
+void hv_set_vpreg(u32 reg, u64 value);
+u64 hv_get_vpreg(u32 reg);
+void hv_get_vpreg_128(u32 reg, struct hv_get_vp_registers_output *result);
+
+static inline void hv_set_register(unsigned int reg, u64 value)
+{
+	hv_set_vpreg(reg, value);
+}
+
+static inline u64 hv_get_register(unsigned int reg)
+{
+	return hv_get_vpreg(reg);
+}
+
+/* SMCCC hypercall parameters */
+#define HV_SMCCC_FUNC_NUMBER	1
+#define HV_FUNC_ID	ARM_SMCCC_CALL_VAL(			\
+				ARM_SMCCC_STD_CALL,		\
+				ARM_SMCCC_SMC_64,		\
+				ARM_SMCCC_OWNER_VENDOR_HYP,	\
+				HV_SMCCC_FUNC_NUMBER)
+
+#include <asm-generic/mshyperv.h>
+
+#endif
diff --git a/arch/arm64/include/asm/mte-def.h b/arch/arm64/include/asm/mte-def.h
new file mode 100644
index 000000000..14ee86b01
--- /dev/null
+++ b/arch/arm64/include/asm/mte-def.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#ifndef __ASM_MTE_DEF_H
+#define __ASM_MTE_DEF_H
+
+#define MTE_GRANULE_SIZE	UL(16)
+#define MTE_GRANULE_MASK	(~(MTE_GRANULE_SIZE - 1))
+#define MTE_GRANULES_PER_PAGE	(PAGE_SIZE / MTE_GRANULE_SIZE)
+#define MTE_TAG_SHIFT		56
+#define MTE_TAG_SIZE		4
+#define MTE_TAG_MASK		GENMASK((MTE_TAG_SHIFT + (MTE_TAG_SIZE - 1)), MTE_TAG_SHIFT)
+#define MTE_PAGE_TAG_STORAGE	(MTE_GRANULES_PER_PAGE * MTE_TAG_SIZE / 8)
+
+#define __MTE_PREAMBLE		ARM64_ASM_PREAMBLE ".arch_extension memtag\n"
+
+#endif /* __ASM_MTE_DEF_H  */
diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h
new file mode 100644
index 000000000..2e98028c1
--- /dev/null
+++ b/arch/arm64/include/asm/mte-kasan.h
@@ -0,0 +1,258 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#ifndef __ASM_MTE_KASAN_H
+#define __ASM_MTE_KASAN_H
+
+#include <asm/compiler.h>
+#include <asm/cputype.h>
+#include <asm/mte-def.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#ifdef CONFIG_KASAN_HW_TAGS
+
+/* Whether the MTE asynchronous mode is enabled. */
+DECLARE_STATIC_KEY_FALSE(mte_async_or_asymm_mode);
+
+static inline bool system_uses_mte_async_or_asymm_mode(void)
+{
+	return static_branch_unlikely(&mte_async_or_asymm_mode);
+}
+
+#else /* CONFIG_KASAN_HW_TAGS */
+
+static inline bool system_uses_mte_async_or_asymm_mode(void)
+{
+	return false;
+}
+
+#endif /* CONFIG_KASAN_HW_TAGS */
+
+#ifdef CONFIG_ARM64_MTE
+
+/*
+ * The Tag Check Flag (TCF) mode for MTE is per EL, hence TCF0
+ * affects EL0 and TCF affects EL1 irrespective of which TTBR is
+ * used.
+ * The kernel accesses TTBR0 usually with LDTR/STTR instructions
+ * when UAO is available, so these would act as EL0 accesses using
+ * TCF0.
+ * However futex.h code uses exclusives which would be executed as
+ * EL1, this can potentially cause a tag check fault even if the
+ * user disables TCF0.
+ *
+ * To address the problem we set the PSTATE.TCO bit in uaccess_enable()
+ * and reset it in uaccess_disable().
+ *
+ * The Tag check override (TCO) bit disables temporarily the tag checking
+ * preventing the issue.
+ */
+static inline void mte_disable_tco(void)
+{
+	asm volatile(ALTERNATIVE("nop", SET_PSTATE_TCO(0),
+				 ARM64_MTE, CONFIG_KASAN_HW_TAGS));
+}
+
+static inline void mte_enable_tco(void)
+{
+	asm volatile(ALTERNATIVE("nop", SET_PSTATE_TCO(1),
+				 ARM64_MTE, CONFIG_KASAN_HW_TAGS));
+}
+
+/*
+ * These functions disable tag checking only if in MTE async mode
+ * since the sync mode generates exceptions synchronously and the
+ * nofault or load_unaligned_zeropad can handle them.
+ */
+static inline void __mte_disable_tco_async(void)
+{
+	if (system_uses_mte_async_or_asymm_mode())
+		mte_disable_tco();
+}
+
+static inline void __mte_enable_tco_async(void)
+{
+	if (system_uses_mte_async_or_asymm_mode())
+		mte_enable_tco();
+}
+
+/*
+ * These functions are meant to be only used from KASAN runtime through
+ * the arch_*() interface defined in asm/memory.h.
+ * These functions don't include system_supports_mte() checks,
+ * as KASAN only calls them when MTE is supported and enabled.
+ */
+
+static inline u8 mte_get_ptr_tag(void *ptr)
+{
+	/* Note: The format of KASAN tags is 0xF<x> */
+	u8 tag = 0xF0 | (u8)(((u64)(ptr)) >> MTE_TAG_SHIFT);
+
+	return tag;
+}
+
+/* Get allocation tag for the address. */
+static inline u8 mte_get_mem_tag(void *addr)
+{
+	asm(__MTE_PREAMBLE "ldg %0, [%0]"
+		: "+r" (addr));
+
+	return mte_get_ptr_tag(addr);
+}
+
+/* Generate a random tag. */
+static inline u8 mte_get_random_tag(void)
+{
+	void *addr;
+
+	asm(__MTE_PREAMBLE "irg %0, %0"
+		: "=r" (addr));
+
+	return mte_get_ptr_tag(addr);
+}
+
+static inline u64 __stg_post(u64 p)
+{
+	asm volatile(__MTE_PREAMBLE "stg %0, [%0], #16"
+		     : "+r"(p)
+		     :
+		     : "memory");
+	return p;
+}
+
+static inline u64 __stzg_post(u64 p)
+{
+	asm volatile(__MTE_PREAMBLE "stzg %0, [%0], #16"
+		     : "+r"(p)
+		     :
+		     : "memory");
+	return p;
+}
+
+static inline void __dc_gva(u64 p)
+{
+	asm volatile(__MTE_PREAMBLE "dc gva, %0" : : "r"(p) : "memory");
+}
+
+static inline void __dc_gzva(u64 p)
+{
+	asm volatile(__MTE_PREAMBLE "dc gzva, %0" : : "r"(p) : "memory");
+}
+
+/*
+ * Assign allocation tags for a region of memory based on the pointer tag.
+ * Note: The address must be non-NULL and MTE_GRANULE_SIZE aligned and
+ * size must be MTE_GRANULE_SIZE aligned.
+ */
+static inline void mte_set_mem_tag_range(void *addr, size_t size, u8 tag,
+					 bool init)
+{
+	u64 curr, mask, dczid, dczid_bs, dczid_dzp, end1, end2, end3;
+
+	/* Read DC G(Z)VA block size from the system register. */
+	dczid = read_cpuid(DCZID_EL0);
+	dczid_bs = 4ul << (dczid & 0xf);
+	dczid_dzp = (dczid >> 4) & 1;
+
+	curr = (u64)__tag_set(addr, tag);
+	mask = dczid_bs - 1;
+	/* STG/STZG up to the end of the first block. */
+	end1 = curr | mask;
+	end3 = curr + size;
+	/* DC GVA / GZVA in [end1, end2) */
+	end2 = end3 & ~mask;
+
+	/*
+	 * The following code uses STG on the first DC GVA block even if the
+	 * start address is aligned - it appears to be faster than an alignment
+	 * check + conditional branch. Also, if the range size is at least 2 DC
+	 * GVA blocks, the first two loops can use post-condition to save one
+	 * branch each.
+	 */
+#define SET_MEMTAG_RANGE(stg_post, dc_gva)		\
+	do {						\
+		if (!dczid_dzp && size >= 2 * dczid_bs) {\
+			do {				\
+				curr = stg_post(curr);	\
+			} while (curr < end1);		\
+							\
+			do {				\
+				dc_gva(curr);		\
+				curr += dczid_bs;	\
+			} while (curr < end2);		\
+		}					\
+							\
+		while (curr < end3)			\
+			curr = stg_post(curr);		\
+	} while (0)
+
+	if (init)
+		SET_MEMTAG_RANGE(__stzg_post, __dc_gzva);
+	else
+		SET_MEMTAG_RANGE(__stg_post, __dc_gva);
+#undef SET_MEMTAG_RANGE
+}
+
+void mte_enable_kernel_sync(void);
+void mte_enable_kernel_async(void);
+void mte_enable_kernel_asymm(void);
+
+#else /* CONFIG_ARM64_MTE */
+
+static inline void mte_disable_tco(void)
+{
+}
+
+static inline void mte_enable_tco(void)
+{
+}
+
+static inline void __mte_disable_tco_async(void)
+{
+}
+
+static inline void __mte_enable_tco_async(void)
+{
+}
+
+static inline u8 mte_get_ptr_tag(void *ptr)
+{
+	return 0xFF;
+}
+
+static inline u8 mte_get_mem_tag(void *addr)
+{
+	return 0xFF;
+}
+
+static inline u8 mte_get_random_tag(void)
+{
+	return 0xFF;
+}
+
+static inline void mte_set_mem_tag_range(void *addr, size_t size,
+						u8 tag, bool init)
+{
+}
+
+static inline void mte_enable_kernel_sync(void)
+{
+}
+
+static inline void mte_enable_kernel_async(void)
+{
+}
+
+static inline void mte_enable_kernel_asymm(void)
+{
+}
+
+#endif /* CONFIG_ARM64_MTE */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_MTE_KASAN_H  */
diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h
new file mode 100644
index 000000000..4cedbaa16
--- /dev/null
+++ b/arch/arm64/include/asm/mte.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#ifndef __ASM_MTE_H
+#define __ASM_MTE_H
+
+#include <asm/compiler.h>
+#include <asm/mte-def.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitfield.h>
+#include <linux/kasan-enabled.h>
+#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <asm/pgtable-types.h>
+
+void mte_clear_page_tags(void *addr);
+unsigned long mte_copy_tags_from_user(void *to, const void __user *from,
+				      unsigned long n);
+unsigned long mte_copy_tags_to_user(void __user *to, void *from,
+				    unsigned long n);
+int mte_save_tags(struct page *page);
+void mte_save_page_tags(const void *page_addr, void *tag_storage);
+void mte_restore_tags(swp_entry_t entry, struct page *page);
+void mte_restore_page_tags(void *page_addr, const void *tag_storage);
+void mte_invalidate_tags(int type, pgoff_t offset);
+void mte_invalidate_tags_area(int type);
+void *mte_allocate_tag_storage(void);
+void mte_free_tag_storage(char *storage);
+
+#ifdef CONFIG_ARM64_MTE
+
+/* track which pages have valid allocation tags */
+#define PG_mte_tagged	PG_arch_2
+/* simple lock to avoid multiple threads tagging the same page */
+#define PG_mte_lock	PG_arch_3
+
+static inline void set_page_mte_tagged(struct page *page)
+{
+	/*
+	 * Ensure that the tags written prior to this function are visible
+	 * before the page flags update.
+	 */
+	smp_wmb();
+	set_bit(PG_mte_tagged, &page->flags);
+}
+
+static inline bool page_mte_tagged(struct page *page)
+{
+	bool ret = test_bit(PG_mte_tagged, &page->flags);
+
+	/*
+	 * If the page is tagged, ensure ordering with a likely subsequent
+	 * read of the tags.
+	 */
+	if (ret)
+		smp_rmb();
+	return ret;
+}
+
+/*
+ * Lock the page for tagging and return 'true' if the page can be tagged,
+ * 'false' if already tagged. PG_mte_tagged is never cleared and therefore the
+ * locking only happens once for page initialisation.
+ *
+ * The page MTE lock state:
+ *
+ *   Locked:	PG_mte_lock && !PG_mte_tagged
+ *   Unlocked:	!PG_mte_lock || PG_mte_tagged
+ *
+ * Acquire semantics only if the page is tagged (returning 'false').
+ */
+static inline bool try_page_mte_tagging(struct page *page)
+{
+	if (!test_and_set_bit(PG_mte_lock, &page->flags))
+		return true;
+
+	/*
+	 * The tags are either being initialised or may have been initialised
+	 * already. Check if the PG_mte_tagged flag has been set or wait
+	 * otherwise.
+	 */
+	smp_cond_load_acquire(&page->flags, VAL & (1UL << PG_mte_tagged));
+
+	return false;
+}
+
+void mte_zero_clear_page_tags(void *addr);
+void mte_sync_tags(pte_t pte);
+void mte_copy_page_tags(void *kto, const void *kfrom);
+void mte_thread_init_user(void);
+void mte_thread_switch(struct task_struct *next);
+void mte_cpu_setup(void);
+void mte_suspend_enter(void);
+void mte_suspend_exit(void);
+long set_mte_ctrl(struct task_struct *task, unsigned long arg);
+long get_mte_ctrl(struct task_struct *task);
+int mte_ptrace_copy_tags(struct task_struct *child, long request,
+			 unsigned long addr, unsigned long data);
+size_t mte_probe_user_range(const char __user *uaddr, size_t size);
+
+#else /* CONFIG_ARM64_MTE */
+
+/* unused if !CONFIG_ARM64_MTE, silence the compiler */
+#define PG_mte_tagged	0
+
+static inline void set_page_mte_tagged(struct page *page)
+{
+}
+static inline bool page_mte_tagged(struct page *page)
+{
+	return false;
+}
+static inline bool try_page_mte_tagging(struct page *page)
+{
+	return false;
+}
+static inline void mte_zero_clear_page_tags(void *addr)
+{
+}
+static inline void mte_sync_tags(pte_t pte)
+{
+}
+static inline void mte_copy_page_tags(void *kto, const void *kfrom)
+{
+}
+static inline void mte_thread_init_user(void)
+{
+}
+static inline void mte_thread_switch(struct task_struct *next)
+{
+}
+static inline void mte_suspend_enter(void)
+{
+}
+static inline void mte_suspend_exit(void)
+{
+}
+static inline long set_mte_ctrl(struct task_struct *task, unsigned long arg)
+{
+	return 0;
+}
+static inline long get_mte_ctrl(struct task_struct *task)
+{
+	return 0;
+}
+static inline int mte_ptrace_copy_tags(struct task_struct *child,
+				       long request, unsigned long addr,
+				       unsigned long data)
+{
+	return -EIO;
+}
+
+#endif /* CONFIG_ARM64_MTE */
+
+static inline void mte_disable_tco_entry(struct task_struct *task)
+{
+	if (!system_supports_mte())
+		return;
+
+	/*
+	 * Re-enable tag checking (TCO set on exception entry). This is only
+	 * necessary if MTE is enabled in either the kernel or the userspace
+	 * task in synchronous or asymmetric mode (SCTLR_EL1.TCF0 bit 0 is set
+	 * for both). With MTE disabled in the kernel and disabled or
+	 * asynchronous in userspace, tag check faults (including in uaccesses)
+	 * are not reported, therefore there is no need to re-enable checking.
+	 * This is beneficial on microarchitectures where re-enabling TCO is
+	 * expensive.
+	 */
+	if (kasan_hw_tags_enabled() ||
+	    (task->thread.sctlr_user & (1UL << SCTLR_EL1_TCF0_SHIFT)))
+		asm volatile(SET_PSTATE_TCO(0));
+}
+
+#ifdef CONFIG_KASAN_HW_TAGS
+void mte_check_tfsr_el1(void);
+
+static inline void mte_check_tfsr_entry(void)
+{
+	if (!system_supports_mte())
+		return;
+
+	mte_check_tfsr_el1();
+}
+
+static inline void mte_check_tfsr_exit(void)
+{
+	if (!system_supports_mte())
+		return;
+
+	/*
+	 * The asynchronous faults are sync'ed automatically with
+	 * TFSR_EL1 on kernel entry but for exit an explicit dsb()
+	 * is required.
+	 */
+	dsb(nsh);
+	isb();
+
+	mte_check_tfsr_el1();
+}
+#else
+static inline void mte_check_tfsr_el1(void)
+{
+}
+static inline void mte_check_tfsr_entry(void)
+{
+}
+static inline void mte_check_tfsr_exit(void)
+{
+}
+#endif /* CONFIG_KASAN_HW_TAGS */
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_MTE_H  */
diff --git a/arch/arm64/include/asm/neon-intrinsics.h b/arch/arm64/include/asm/neon-intrinsics.h
new file mode 100644
index 000000000..5f13505d3
--- /dev/null
+++ b/arch/arm64/include/asm/neon-intrinsics.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2018 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#ifndef __ASM_NEON_INTRINSICS_H
+#define __ASM_NEON_INTRINSICS_H
+
+#include <asm-generic/int-ll64.h>
+
+/*
+ * In the kernel, u64/s64 are [un]signed long long, not [un]signed long.
+ * So by redefining these macros to the former, we can force gcc-stdint.h
+ * to define uint64_t / in64_t in a compatible manner.
+ */
+
+#ifdef __INT64_TYPE__
+#undef __INT64_TYPE__
+#define __INT64_TYPE__		long long
+#endif
+
+#ifdef __UINT64_TYPE__
+#undef __UINT64_TYPE__
+#define __UINT64_TYPE__		unsigned long long
+#endif
+
+/*
+ * genksyms chokes on the ARM NEON instrinsics system header, but we
+ * don't export anything it defines anyway, so just disregard when
+ * genksyms execute.
+ */
+#ifndef __GENKSYMS__
+#include <arm_neon.h>
+#endif
+
+#ifdef CONFIG_CC_IS_CLANG
+#pragma clang diagnostic ignored "-Wincompatible-pointer-types"
+#endif
+
+#endif /* __ASM_NEON_INTRINSICS_H */
diff --git a/arch/arm64/include/asm/neon.h b/arch/arm64/include/asm/neon.h
new file mode 100644
index 000000000..d4b1d172a
--- /dev/null
+++ b/arch/arm64/include/asm/neon.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/arch/arm64/include/asm/neon.h
+ *
+ * Copyright (C) 2013 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#ifndef __ASM_NEON_H
+#define __ASM_NEON_H
+
+#include <linux/types.h>
+#include <asm/fpsimd.h>
+
+#define cpu_has_neon()		system_supports_fpsimd()
+
+void kernel_neon_begin(void);
+void kernel_neon_end(void);
+
+#endif /* ! __ASM_NEON_H */
diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h
new file mode 100644
index 000000000..8c8cf4297
--- /dev/null
+++ b/arch/arm64/include/asm/numa.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_NUMA_H
+#define __ASM_NUMA_H
+
+#include <asm/topology.h>
+#include <asm-generic/numa.h>
+
+#endif	/* __ASM_NUMA_H */
diff --git a/arch/arm64/include/asm/page-def.h b/arch/arm64/include/asm/page-def.h
new file mode 100644
index 000000000..2403f7b4c
--- /dev/null
+++ b/arch/arm64/include/asm/page-def.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/page.h
+ *
+ * Copyright (C) 1995-2003 Russell King
+ * Copyright (C) 2017 ARM Ltd.
+ */
+#ifndef __ASM_PAGE_DEF_H
+#define __ASM_PAGE_DEF_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT		CONFIG_ARM64_PAGE_SHIFT
+#define PAGE_SIZE		(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#endif /* __ASM_PAGE_DEF_H */
diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
new file mode 100644
index 000000000..2312e6ee5
--- /dev/null
+++ b/arch/arm64/include/asm/page.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/page.h
+ *
+ * Copyright (C) 1995-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PAGE_H
+#define __ASM_PAGE_H
+
+#include <asm/page-def.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/personality.h> /* for READ_IMPLIES_EXEC */
+#include <linux/types.h> /* for gfp_t */
+#include <asm/pgtable-types.h>
+
+struct page;
+struct vm_area_struct;
+
+extern void copy_page(void *to, const void *from);
+extern void clear_page(void *to);
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+
+void copy_highpage(struct page *to, struct page *from);
+#define __HAVE_ARCH_COPY_HIGHPAGE
+
+struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma,
+						unsigned long vaddr);
+#define vma_alloc_zeroed_movable_folio vma_alloc_zeroed_movable_folio
+
+void tag_clear_highpage(struct page *to);
+#define __HAVE_ARCH_TAG_CLEAR_HIGHPAGE
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+typedef struct page *pgtable_t;
+
+int pfn_is_map_memory(unsigned long pfn);
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_DATA_FLAGS_TSK_EXEC | VM_MTE_ALLOWED)
+
+#include <asm-generic/getorder.h>
+
+#endif
diff --git a/arch/arm64/include/asm/paravirt.h b/arch/arm64/include/asm/paravirt.h
new file mode 100644
index 000000000..9aa193e0e
--- /dev/null
+++ b/arch/arm64/include/asm/paravirt.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_PARAVIRT_H
+#define _ASM_ARM64_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT
+#include <linux/static_call_types.h>
+
+struct static_key;
+extern struct static_key paravirt_steal_enabled;
+extern struct static_key paravirt_steal_rq_enabled;
+
+u64 dummy_steal_clock(int cpu);
+
+DECLARE_STATIC_CALL(pv_steal_clock, dummy_steal_clock);
+
+static inline u64 paravirt_steal_clock(int cpu)
+{
+	return static_call(pv_steal_clock)(cpu);
+}
+
+int __init pv_time_init(void);
+
+#else
+
+#define pv_time_init() do {} while (0)
+
+#endif // CONFIG_PARAVIRT
+
+#endif
diff --git a/arch/arm64/include/asm/paravirt_api_clock.h b/arch/arm64/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000..65ac7cee0
--- /dev/null
+++ b/arch/arm64/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/arm64/include/asm/patching.h b/arch/arm64/include/asm/patching.h
new file mode 100644
index 000000000..68908b82b
--- /dev/null
+++ b/arch/arm64/include/asm/patching.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef	__ASM_PATCHING_H
+#define	__ASM_PATCHING_H
+
+#include <linux/types.h>
+
+int aarch64_insn_read(void *addr, u32 *insnp);
+int aarch64_insn_write(void *addr, u32 insn);
+
+int aarch64_insn_write_literal_u64(void *addr, u64 val);
+
+int aarch64_insn_patch_text_nosync(void *addr, u32 insn);
+int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt);
+
+#endif	/* __ASM_PATCHING_H */
diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h
new file mode 100644
index 000000000..016eb6b46
--- /dev/null
+++ b/arch/arm64/include/asm/pci.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_PCI_H
+#define __ASM_PCI_H
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+
+/*
+ * Set to 1 if the kernel should re-assign all PCI bus numbers
+ */
+#define pcibios_assign_all_busses() \
+	(pci_has_flag(PCI_REASSIGN_ALL_BUS))
+
+#define arch_can_pci_mmap_wc() 1
+
+/* Generic PCI */
+#include <asm-generic/pci.h>
+
+#endif  /* __ASM_PCI_H */
diff --git a/arch/arm64/include/asm/percpu.h b/arch/arm64/include/asm/percpu.h
new file mode 100644
index 000000000..9abcc8ef3
--- /dev/null
+++ b/arch/arm64/include/asm/percpu.h
@@ -0,0 +1,271 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ */
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <linux/preempt.h>
+
+#include <asm/alternative.h>
+#include <asm/cmpxchg.h>
+#include <asm/stack_pointer.h>
+#include <asm/sysreg.h>
+
+static inline void set_my_cpu_offset(unsigned long off)
+{
+	asm volatile(ALTERNATIVE("msr tpidr_el1, %0",
+				 "msr tpidr_el2, %0",
+				 ARM64_HAS_VIRT_HOST_EXTN)
+			:: "r" (off) : "memory");
+}
+
+static inline unsigned long __hyp_my_cpu_offset(void)
+{
+	/*
+	 * Non-VHE hyp code runs with preemption disabled. No need to hazard
+	 * the register access against barrier() as in __kern_my_cpu_offset.
+	 */
+	return read_sysreg(tpidr_el2);
+}
+
+static inline unsigned long __kern_my_cpu_offset(void)
+{
+	unsigned long off;
+
+	/*
+	 * We want to allow caching the value, so avoid using volatile and
+	 * instead use a fake stack read to hazard against barrier().
+	 */
+	asm(ALTERNATIVE("mrs %0, tpidr_el1",
+			"mrs %0, tpidr_el2",
+			ARM64_HAS_VIRT_HOST_EXTN)
+		: "=r" (off) :
+		"Q" (*(const unsigned long *)current_stack_pointer));
+
+	return off;
+}
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+#define __my_cpu_offset __hyp_my_cpu_offset()
+#else
+#define __my_cpu_offset __kern_my_cpu_offset()
+#endif
+
+#define PERCPU_RW_OPS(sz)						\
+static inline unsigned long __percpu_read_##sz(void *ptr)		\
+{									\
+	return READ_ONCE(*(u##sz *)ptr);				\
+}									\
+									\
+static inline void __percpu_write_##sz(void *ptr, unsigned long val)	\
+{									\
+	WRITE_ONCE(*(u##sz *)ptr, (u##sz)val);				\
+}
+
+#define __PERCPU_OP_CASE(w, sfx, name, sz, op_llsc, op_lse)		\
+static inline void							\
+__percpu_##name##_case_##sz(void *ptr, unsigned long val)		\
+{									\
+	unsigned int loop;						\
+	u##sz tmp;							\
+									\
+	asm volatile (ARM64_LSE_ATOMIC_INSN(				\
+	/* LL/SC */							\
+	"1:	ldxr" #sfx "\t%" #w "[tmp], %[ptr]\n"			\
+		#op_llsc "\t%" #w "[tmp], %" #w "[tmp], %" #w "[val]\n"	\
+	"	stxr" #sfx "\t%w[loop], %" #w "[tmp], %[ptr]\n"		\
+	"	cbnz	%w[loop], 1b",					\
+	/* LSE atomics */						\
+		#op_lse "\t%" #w "[val], %[ptr]\n"			\
+		__nops(3))						\
+	: [loop] "=&r" (loop), [tmp] "=&r" (tmp),			\
+	  [ptr] "+Q"(*(u##sz *)ptr)					\
+	: [val] "r" ((u##sz)(val)));					\
+}
+
+#define __PERCPU_RET_OP_CASE(w, sfx, name, sz, op_llsc, op_lse)		\
+static inline u##sz							\
+__percpu_##name##_return_case_##sz(void *ptr, unsigned long val)	\
+{									\
+	unsigned int loop;						\
+	u##sz ret;							\
+									\
+	asm volatile (ARM64_LSE_ATOMIC_INSN(				\
+	/* LL/SC */							\
+	"1:	ldxr" #sfx "\t%" #w "[ret], %[ptr]\n"			\
+		#op_llsc "\t%" #w "[ret], %" #w "[ret], %" #w "[val]\n"	\
+	"	stxr" #sfx "\t%w[loop], %" #w "[ret], %[ptr]\n"		\
+	"	cbnz	%w[loop], 1b",					\
+	/* LSE atomics */						\
+		#op_lse "\t%" #w "[val], %" #w "[ret], %[ptr]\n"	\
+		#op_llsc "\t%" #w "[ret], %" #w "[ret], %" #w "[val]\n"	\
+		__nops(2))						\
+	: [loop] "=&r" (loop), [ret] "=&r" (ret),			\
+	  [ptr] "+Q"(*(u##sz *)ptr)					\
+	: [val] "r" ((u##sz)(val)));					\
+									\
+	return ret;							\
+}
+
+#define PERCPU_OP(name, op_llsc, op_lse)				\
+	__PERCPU_OP_CASE(w, b, name,  8, op_llsc, op_lse)		\
+	__PERCPU_OP_CASE(w, h, name, 16, op_llsc, op_lse)		\
+	__PERCPU_OP_CASE(w,  , name, 32, op_llsc, op_lse)		\
+	__PERCPU_OP_CASE( ,  , name, 64, op_llsc, op_lse)
+
+#define PERCPU_RET_OP(name, op_llsc, op_lse)				\
+	__PERCPU_RET_OP_CASE(w, b, name,  8, op_llsc, op_lse)		\
+	__PERCPU_RET_OP_CASE(w, h, name, 16, op_llsc, op_lse)		\
+	__PERCPU_RET_OP_CASE(w,  , name, 32, op_llsc, op_lse)		\
+	__PERCPU_RET_OP_CASE( ,  , name, 64, op_llsc, op_lse)
+
+PERCPU_RW_OPS(8)
+PERCPU_RW_OPS(16)
+PERCPU_RW_OPS(32)
+PERCPU_RW_OPS(64)
+PERCPU_OP(add, add, stadd)
+PERCPU_OP(andnot, bic, stclr)
+PERCPU_OP(or, orr, stset)
+PERCPU_RET_OP(add, add, ldadd)
+
+#undef PERCPU_RW_OPS
+#undef __PERCPU_OP_CASE
+#undef __PERCPU_RET_OP_CASE
+#undef PERCPU_OP
+#undef PERCPU_RET_OP
+
+/*
+ * It would be nice to avoid the conditional call into the scheduler when
+ * re-enabling preemption for preemptible kernels, but doing that in a way
+ * which builds inside a module would mean messing directly with the preempt
+ * count. If you do this, peterz and tglx will hunt you down.
+ *
+ * Not to mention it'll break the actual preemption model for missing a
+ * preemption point when TIF_NEED_RESCHED gets set while preemption is
+ * disabled.
+ */
+
+#define _pcp_protect(op, pcp, ...)					\
+({									\
+	preempt_disable_notrace();					\
+	op(raw_cpu_ptr(&(pcp)), __VA_ARGS__);				\
+	preempt_enable_notrace();					\
+})
+
+#define _pcp_protect_return(op, pcp, args...)				\
+({									\
+	typeof(pcp) __retval;						\
+	preempt_disable_notrace();					\
+	__retval = (typeof(pcp))op(raw_cpu_ptr(&(pcp)), ##args);	\
+	preempt_enable_notrace();					\
+	__retval;							\
+})
+
+#define this_cpu_read_1(pcp)		\
+	_pcp_protect_return(__percpu_read_8, pcp)
+#define this_cpu_read_2(pcp)		\
+	_pcp_protect_return(__percpu_read_16, pcp)
+#define this_cpu_read_4(pcp)		\
+	_pcp_protect_return(__percpu_read_32, pcp)
+#define this_cpu_read_8(pcp)		\
+	_pcp_protect_return(__percpu_read_64, pcp)
+
+#define this_cpu_write_1(pcp, val)	\
+	_pcp_protect(__percpu_write_8, pcp, (unsigned long)val)
+#define this_cpu_write_2(pcp, val)	\
+	_pcp_protect(__percpu_write_16, pcp, (unsigned long)val)
+#define this_cpu_write_4(pcp, val)	\
+	_pcp_protect(__percpu_write_32, pcp, (unsigned long)val)
+#define this_cpu_write_8(pcp, val)	\
+	_pcp_protect(__percpu_write_64, pcp, (unsigned long)val)
+
+#define this_cpu_add_1(pcp, val)	\
+	_pcp_protect(__percpu_add_case_8, pcp, val)
+#define this_cpu_add_2(pcp, val)	\
+	_pcp_protect(__percpu_add_case_16, pcp, val)
+#define this_cpu_add_4(pcp, val)	\
+	_pcp_protect(__percpu_add_case_32, pcp, val)
+#define this_cpu_add_8(pcp, val)	\
+	_pcp_protect(__percpu_add_case_64, pcp, val)
+
+#define this_cpu_add_return_1(pcp, val)	\
+	_pcp_protect_return(__percpu_add_return_case_8, pcp, val)
+#define this_cpu_add_return_2(pcp, val)	\
+	_pcp_protect_return(__percpu_add_return_case_16, pcp, val)
+#define this_cpu_add_return_4(pcp, val)	\
+	_pcp_protect_return(__percpu_add_return_case_32, pcp, val)
+#define this_cpu_add_return_8(pcp, val)	\
+	_pcp_protect_return(__percpu_add_return_case_64, pcp, val)
+
+#define this_cpu_and_1(pcp, val)	\
+	_pcp_protect(__percpu_andnot_case_8, pcp, ~val)
+#define this_cpu_and_2(pcp, val)	\
+	_pcp_protect(__percpu_andnot_case_16, pcp, ~val)
+#define this_cpu_and_4(pcp, val)	\
+	_pcp_protect(__percpu_andnot_case_32, pcp, ~val)
+#define this_cpu_and_8(pcp, val)	\
+	_pcp_protect(__percpu_andnot_case_64, pcp, ~val)
+
+#define this_cpu_or_1(pcp, val)		\
+	_pcp_protect(__percpu_or_case_8, pcp, val)
+#define this_cpu_or_2(pcp, val)		\
+	_pcp_protect(__percpu_or_case_16, pcp, val)
+#define this_cpu_or_4(pcp, val)		\
+	_pcp_protect(__percpu_or_case_32, pcp, val)
+#define this_cpu_or_8(pcp, val)		\
+	_pcp_protect(__percpu_or_case_64, pcp, val)
+
+#define this_cpu_xchg_1(pcp, val)	\
+	_pcp_protect_return(xchg_relaxed, pcp, val)
+#define this_cpu_xchg_2(pcp, val)	\
+	_pcp_protect_return(xchg_relaxed, pcp, val)
+#define this_cpu_xchg_4(pcp, val)	\
+	_pcp_protect_return(xchg_relaxed, pcp, val)
+#define this_cpu_xchg_8(pcp, val)	\
+	_pcp_protect_return(xchg_relaxed, pcp, val)
+
+#define this_cpu_cmpxchg_1(pcp, o, n)	\
+	_pcp_protect_return(cmpxchg_relaxed, pcp, o, n)
+#define this_cpu_cmpxchg_2(pcp, o, n)	\
+	_pcp_protect_return(cmpxchg_relaxed, pcp, o, n)
+#define this_cpu_cmpxchg_4(pcp, o, n)	\
+	_pcp_protect_return(cmpxchg_relaxed, pcp, o, n)
+#define this_cpu_cmpxchg_8(pcp, o, n)	\
+	_pcp_protect_return(cmpxchg_relaxed, pcp, o, n)
+
+#define this_cpu_cmpxchg64(pcp, o, n)	this_cpu_cmpxchg_8(pcp, o, n)
+
+#define this_cpu_cmpxchg128(pcp, o, n)					\
+({									\
+	typedef typeof(pcp) pcp_op_T__;					\
+	u128 old__, new__, ret__;					\
+	pcp_op_T__ *ptr__;						\
+	old__ = o;							\
+	new__ = n;							\
+	preempt_disable_notrace();					\
+	ptr__ = raw_cpu_ptr(&(pcp));					\
+	ret__ = cmpxchg128_local((void *)ptr__, old__, new__);		\
+	preempt_enable_notrace();					\
+	ret__;								\
+})
+
+#ifdef __KVM_NVHE_HYPERVISOR__
+extern unsigned long __hyp_per_cpu_offset(unsigned int cpu);
+#define __per_cpu_offset
+#define per_cpu_offset(cpu)	__hyp_per_cpu_offset((cpu))
+#endif
+
+#include <asm-generic/percpu.h>
+
+/* Redefine macros for nVHE hyp under DEBUG_PREEMPT to avoid its dependencies. */
+#if defined(__KVM_NVHE_HYPERVISOR__) && defined(CONFIG_DEBUG_PREEMPT)
+#undef	this_cpu_ptr
+#define	this_cpu_ptr		raw_cpu_ptr
+#undef	__this_cpu_read
+#define	__this_cpu_read		raw_cpu_read
+#undef	__this_cpu_write
+#define	__this_cpu_write	raw_cpu_write
+#endif
+
+#endif /* __ASM_PERCPU_H */
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
new file mode 100644
index 000000000..eb7071c9e
--- /dev/null
+++ b/arch/arm64/include/asm/perf_event.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ASM_PERF_EVENT_H
+#define __ASM_PERF_EVENT_H
+
+#include <asm/stack_pointer.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_PERF_EVENTS
+struct pt_regs;
+extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
+extern unsigned long perf_misc_flags(struct pt_regs *regs);
+#define perf_misc_flags(regs)	perf_misc_flags(regs)
+#define perf_arch_bpf_user_pt_regs(regs) &regs->user_regs
+#endif
+
+#define perf_arch_fetch_caller_regs(regs, __ip) { \
+	(regs)->pc = (__ip);    \
+	(regs)->regs[29] = (unsigned long) __builtin_frame_address(0); \
+	(regs)->sp = current_stack_pointer; \
+	(regs)->pstate = PSR_MODE_EL1h;	\
+}
+
+#endif
diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h
new file mode 100644
index 000000000..237224484
--- /dev/null
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/pgalloc.h
+ *
+ * Copyright (C) 2000-2001 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PGALLOC_H
+#define __ASM_PGALLOC_H
+
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define __HAVE_ARCH_PGD_FREE
+#include <asm-generic/pgalloc.h>
+
+#define PGD_SIZE	(PTRS_PER_PGD * sizeof(pgd_t))
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+static inline void __pud_populate(pud_t *pudp, phys_addr_t pmdp, pudval_t prot)
+{
+	set_pud(pudp, __pud(__phys_to_pud_val(pmdp) | prot));
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmdp)
+{
+	pudval_t pudval = PUD_TYPE_TABLE;
+
+	pudval |= (mm == &init_mm) ? PUD_TABLE_UXN : PUD_TABLE_PXN;
+	__pud_populate(pudp, __pa(pmdp), pudval);
+}
+#else
+static inline void __pud_populate(pud_t *pudp, phys_addr_t pmdp, pudval_t prot)
+{
+	BUILD_BUG();
+}
+#endif	/* CONFIG_PGTABLE_LEVELS > 2 */
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+static inline void __p4d_populate(p4d_t *p4dp, phys_addr_t pudp, p4dval_t prot)
+{
+	set_p4d(p4dp, __p4d(__phys_to_p4d_val(pudp) | prot));
+}
+
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp)
+{
+	p4dval_t p4dval = P4D_TYPE_TABLE;
+
+	p4dval |= (mm == &init_mm) ? P4D_TABLE_UXN : P4D_TABLE_PXN;
+	__p4d_populate(p4dp, __pa(pudp), p4dval);
+}
+#else
+static inline void __p4d_populate(p4d_t *p4dp, phys_addr_t pudp, p4dval_t prot)
+{
+	BUILD_BUG();
+}
+#endif	/* CONFIG_PGTABLE_LEVELS > 3 */
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgdp);
+
+static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t ptep,
+				  pmdval_t prot)
+{
+	set_pmd(pmdp, __pmd(__phys_to_pmd_val(ptep) | prot));
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	VM_BUG_ON(mm && mm != &init_mm);
+	__pmd_populate(pmdp, __pa(ptep), PMD_TYPE_TABLE | PMD_TABLE_UXN);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+	VM_BUG_ON(mm == &init_mm);
+	__pmd_populate(pmdp, page_to_phys(ptep), PMD_TYPE_TABLE | PMD_TABLE_PXN);
+}
+
+#endif
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
new file mode 100644
index 000000000..e4944d517
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PGTABLE_HWDEF_H
+#define __ASM_PGTABLE_HWDEF_H
+
+#include <asm/memory.h>
+
+/*
+ * Number of page-table levels required to address 'va_bits' wide
+ * address, without section mapping. We resolve the top (va_bits - PAGE_SHIFT)
+ * bits with (PAGE_SHIFT - 3) bits at each page table level. Hence:
+ *
+ *  levels = DIV_ROUND_UP((va_bits - PAGE_SHIFT), (PAGE_SHIFT - 3))
+ *
+ * where DIV_ROUND_UP(n, d) => (((n) + (d) - 1) / (d))
+ *
+ * We cannot include linux/kernel.h which defines DIV_ROUND_UP here
+ * due to build issues. So we open code DIV_ROUND_UP here:
+ *
+ *	((((va_bits) - PAGE_SHIFT) + (PAGE_SHIFT - 3) - 1) / (PAGE_SHIFT - 3))
+ *
+ * which gets simplified as :
+ */
+#define ARM64_HW_PGTABLE_LEVELS(va_bits) (((va_bits) - 4) / (PAGE_SHIFT - 3))
+
+/*
+ * Size mapped by an entry at level n ( 0 <= n <= 3)
+ * We map (PAGE_SHIFT - 3) at all translation levels and PAGE_SHIFT bits
+ * in the final page. The maximum number of translation levels supported by
+ * the architecture is 4. Hence, starting at level n, we have further
+ * ((4 - n) - 1) levels of translation excluding the offset within the page.
+ * So, the total number of bits mapped by an entry at level n is :
+ *
+ *  ((4 - n) - 1) * (PAGE_SHIFT - 3) + PAGE_SHIFT
+ *
+ * Rearranging it a bit we get :
+ *   (4 - n) * (PAGE_SHIFT - 3) + 3
+ */
+#define ARM64_HW_PGTABLE_LEVEL_SHIFT(n)	((PAGE_SHIFT - 3) * (4 - (n)) + 3)
+
+#define PTRS_PER_PTE		(1 << (PAGE_SHIFT - 3))
+
+/*
+ * PMD_SHIFT determines the size a level 2 page table entry can map.
+ */
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(2)
+#define PMD_SIZE		(_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PTRS_PER_PMD		(1 << (PAGE_SHIFT - 3))
+#endif
+
+/*
+ * PUD_SHIFT determines the size a level 1 page table entry can map.
+ */
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(1)
+#define PUD_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE-1))
+#define PTRS_PER_PUD		(1 << (PAGE_SHIFT - 3))
+#endif
+
+/*
+ * PGDIR_SHIFT determines the size a top-level page table entry can map
+ * (depending on the configuration, this level can be 0, 1 or 2).
+ */
+#define PGDIR_SHIFT		ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - CONFIG_PGTABLE_LEVELS)
+#define PGDIR_SIZE		(_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD		(1 << (VA_BITS - PGDIR_SHIFT))
+
+/*
+ * Contiguous page definitions.
+ */
+#define CONT_PTE_SHIFT		(CONFIG_ARM64_CONT_PTE_SHIFT + PAGE_SHIFT)
+#define CONT_PTES		(1 << (CONT_PTE_SHIFT - PAGE_SHIFT))
+#define CONT_PTE_SIZE		(CONT_PTES * PAGE_SIZE)
+#define CONT_PTE_MASK		(~(CONT_PTE_SIZE - 1))
+
+#define CONT_PMD_SHIFT		(CONFIG_ARM64_CONT_PMD_SHIFT + PMD_SHIFT)
+#define CONT_PMDS		(1 << (CONT_PMD_SHIFT - PMD_SHIFT))
+#define CONT_PMD_SIZE		(CONT_PMDS * PMD_SIZE)
+#define CONT_PMD_MASK		(~(CONT_PMD_SIZE - 1))
+
+/*
+ * Hardware page table definitions.
+ *
+ * Level 0 descriptor (P4D).
+ */
+#define P4D_TYPE_TABLE		(_AT(p4dval_t, 3) << 0)
+#define P4D_TABLE_BIT		(_AT(p4dval_t, 1) << 1)
+#define P4D_TYPE_MASK		(_AT(p4dval_t, 3) << 0)
+#define P4D_TYPE_SECT		(_AT(p4dval_t, 1) << 0)
+#define P4D_SECT_RDONLY		(_AT(p4dval_t, 1) << 7)		/* AP[2] */
+#define P4D_TABLE_PXN		(_AT(p4dval_t, 1) << 59)
+#define P4D_TABLE_UXN		(_AT(p4dval_t, 1) << 60)
+
+/*
+ * Level 1 descriptor (PUD).
+ */
+#define PUD_TYPE_TABLE		(_AT(pudval_t, 3) << 0)
+#define PUD_TABLE_BIT		(_AT(pudval_t, 1) << 1)
+#define PUD_TYPE_MASK		(_AT(pudval_t, 3) << 0)
+#define PUD_TYPE_SECT		(_AT(pudval_t, 1) << 0)
+#define PUD_SECT_RDONLY		(_AT(pudval_t, 1) << 7)		/* AP[2] */
+#define PUD_TABLE_PXN		(_AT(pudval_t, 1) << 59)
+#define PUD_TABLE_UXN		(_AT(pudval_t, 1) << 60)
+
+/*
+ * Level 2 descriptor (PMD).
+ */
+#define PMD_TYPE_MASK		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_TABLE		(_AT(pmdval_t, 3) << 0)
+#define PMD_TYPE_SECT		(_AT(pmdval_t, 1) << 0)
+#define PMD_TABLE_BIT		(_AT(pmdval_t, 1) << 1)
+
+/*
+ * Section
+ */
+#define PMD_SECT_VALID		(_AT(pmdval_t, 1) << 0)
+#define PMD_SECT_USER		(_AT(pmdval_t, 1) << 6)		/* AP[1] */
+#define PMD_SECT_RDONLY		(_AT(pmdval_t, 1) << 7)		/* AP[2] */
+#define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
+#define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
+#define PMD_SECT_NG		(_AT(pmdval_t, 1) << 11)
+#define PMD_SECT_CONT		(_AT(pmdval_t, 1) << 52)
+#define PMD_SECT_PXN		(_AT(pmdval_t, 1) << 53)
+#define PMD_SECT_UXN		(_AT(pmdval_t, 1) << 54)
+#define PMD_TABLE_PXN		(_AT(pmdval_t, 1) << 59)
+#define PMD_TABLE_UXN		(_AT(pmdval_t, 1) << 60)
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PMD_ATTRINDX(t)		(_AT(pmdval_t, (t)) << 2)
+#define PMD_ATTRINDX_MASK	(_AT(pmdval_t, 7) << 2)
+
+/*
+ * Level 3 descriptor (PTE).
+ */
+#define PTE_VALID		(_AT(pteval_t, 1) << 0)
+#define PTE_TYPE_MASK		(_AT(pteval_t, 3) << 0)
+#define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
+#define PTE_TABLE_BIT		(_AT(pteval_t, 1) << 1)
+#define PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
+#define PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
+#define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
+#define PTE_AF			(_AT(pteval_t, 1) << 10)	/* Access Flag */
+#define PTE_NG			(_AT(pteval_t, 1) << 11)	/* nG */
+#define PTE_GP			(_AT(pteval_t, 1) << 50)	/* BTI guarded */
+#define PTE_DBM			(_AT(pteval_t, 1) << 51)	/* Dirty Bit Management */
+#define PTE_CONT		(_AT(pteval_t, 1) << 52)	/* Contiguous range */
+#define PTE_PXN			(_AT(pteval_t, 1) << 53)	/* Privileged XN */
+#define PTE_UXN			(_AT(pteval_t, 1) << 54)	/* User XN */
+
+#define PTE_ADDR_LOW		(((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT)
+#ifdef CONFIG_ARM64_PA_BITS_52
+#define PTE_ADDR_HIGH		(_AT(pteval_t, 0xf) << 12)
+#define PTE_ADDR_MASK		(PTE_ADDR_LOW | PTE_ADDR_HIGH)
+#define PTE_ADDR_HIGH_SHIFT	36
+#else
+#define PTE_ADDR_MASK		PTE_ADDR_LOW
+#endif
+
+/*
+ * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
+ */
+#define PTE_ATTRINDX(t)		(_AT(pteval_t, (t)) << 2)
+#define PTE_ATTRINDX_MASK	(_AT(pteval_t, 7) << 2)
+
+/*
+ * PIIndex[3:0] encoding (Permission Indirection Extension)
+ */
+#define PTE_PI_IDX_0	6	/* AP[1], USER */
+#define PTE_PI_IDX_1	51	/* DBM */
+#define PTE_PI_IDX_2	53	/* PXN */
+#define PTE_PI_IDX_3	54	/* UXN */
+
+/*
+ * Memory Attribute override for Stage-2 (MemAttr[3:0])
+ */
+#define PTE_S2_MEMATTR(t)	(_AT(pteval_t, (t)) << 2)
+
+/*
+ * Highest possible physical address supported.
+ */
+#define PHYS_MASK_SHIFT		(CONFIG_ARM64_PA_BITS)
+#define PHYS_MASK		((UL(1) << PHYS_MASK_SHIFT) - 1)
+
+#define TTBR_CNP_BIT		(UL(1) << 0)
+
+/*
+ * TCR flags.
+ */
+#define TCR_T0SZ_OFFSET		0
+#define TCR_T1SZ_OFFSET		16
+#define TCR_T0SZ(x)		((UL(64) - (x)) << TCR_T0SZ_OFFSET)
+#define TCR_T1SZ(x)		((UL(64) - (x)) << TCR_T1SZ_OFFSET)
+#define TCR_TxSZ(x)		(TCR_T0SZ(x) | TCR_T1SZ(x))
+#define TCR_TxSZ_WIDTH		6
+#define TCR_T0SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T0SZ_OFFSET)
+#define TCR_T1SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T1SZ_OFFSET)
+
+#define TCR_EPD0_SHIFT		7
+#define TCR_EPD0_MASK		(UL(1) << TCR_EPD0_SHIFT)
+#define TCR_IRGN0_SHIFT		8
+#define TCR_IRGN0_MASK		(UL(3) << TCR_IRGN0_SHIFT)
+#define TCR_IRGN0_NC		(UL(0) << TCR_IRGN0_SHIFT)
+#define TCR_IRGN0_WBWA		(UL(1) << TCR_IRGN0_SHIFT)
+#define TCR_IRGN0_WT		(UL(2) << TCR_IRGN0_SHIFT)
+#define TCR_IRGN0_WBnWA		(UL(3) << TCR_IRGN0_SHIFT)
+
+#define TCR_EPD1_SHIFT		23
+#define TCR_EPD1_MASK		(UL(1) << TCR_EPD1_SHIFT)
+#define TCR_IRGN1_SHIFT		24
+#define TCR_IRGN1_MASK		(UL(3) << TCR_IRGN1_SHIFT)
+#define TCR_IRGN1_NC		(UL(0) << TCR_IRGN1_SHIFT)
+#define TCR_IRGN1_WBWA		(UL(1) << TCR_IRGN1_SHIFT)
+#define TCR_IRGN1_WT		(UL(2) << TCR_IRGN1_SHIFT)
+#define TCR_IRGN1_WBnWA		(UL(3) << TCR_IRGN1_SHIFT)
+
+#define TCR_IRGN_NC		(TCR_IRGN0_NC | TCR_IRGN1_NC)
+#define TCR_IRGN_WBWA		(TCR_IRGN0_WBWA | TCR_IRGN1_WBWA)
+#define TCR_IRGN_WT		(TCR_IRGN0_WT | TCR_IRGN1_WT)
+#define TCR_IRGN_WBnWA		(TCR_IRGN0_WBnWA | TCR_IRGN1_WBnWA)
+#define TCR_IRGN_MASK		(TCR_IRGN0_MASK | TCR_IRGN1_MASK)
+
+
+#define TCR_ORGN0_SHIFT		10
+#define TCR_ORGN0_MASK		(UL(3) << TCR_ORGN0_SHIFT)
+#define TCR_ORGN0_NC		(UL(0) << TCR_ORGN0_SHIFT)
+#define TCR_ORGN0_WBWA		(UL(1) << TCR_ORGN0_SHIFT)
+#define TCR_ORGN0_WT		(UL(2) << TCR_ORGN0_SHIFT)
+#define TCR_ORGN0_WBnWA		(UL(3) << TCR_ORGN0_SHIFT)
+
+#define TCR_ORGN1_SHIFT		26
+#define TCR_ORGN1_MASK		(UL(3) << TCR_ORGN1_SHIFT)
+#define TCR_ORGN1_NC		(UL(0) << TCR_ORGN1_SHIFT)
+#define TCR_ORGN1_WBWA		(UL(1) << TCR_ORGN1_SHIFT)
+#define TCR_ORGN1_WT		(UL(2) << TCR_ORGN1_SHIFT)
+#define TCR_ORGN1_WBnWA		(UL(3) << TCR_ORGN1_SHIFT)
+
+#define TCR_ORGN_NC		(TCR_ORGN0_NC | TCR_ORGN1_NC)
+#define TCR_ORGN_WBWA		(TCR_ORGN0_WBWA | TCR_ORGN1_WBWA)
+#define TCR_ORGN_WT		(TCR_ORGN0_WT | TCR_ORGN1_WT)
+#define TCR_ORGN_WBnWA		(TCR_ORGN0_WBnWA | TCR_ORGN1_WBnWA)
+#define TCR_ORGN_MASK		(TCR_ORGN0_MASK | TCR_ORGN1_MASK)
+
+#define TCR_SH0_SHIFT		12
+#define TCR_SH0_MASK		(UL(3) << TCR_SH0_SHIFT)
+#define TCR_SH0_INNER		(UL(3) << TCR_SH0_SHIFT)
+
+#define TCR_SH1_SHIFT		28
+#define TCR_SH1_MASK		(UL(3) << TCR_SH1_SHIFT)
+#define TCR_SH1_INNER		(UL(3) << TCR_SH1_SHIFT)
+#define TCR_SHARED		(TCR_SH0_INNER | TCR_SH1_INNER)
+
+#define TCR_TG0_SHIFT		14
+#define TCR_TG0_MASK		(UL(3) << TCR_TG0_SHIFT)
+#define TCR_TG0_4K		(UL(0) << TCR_TG0_SHIFT)
+#define TCR_TG0_64K		(UL(1) << TCR_TG0_SHIFT)
+#define TCR_TG0_16K		(UL(2) << TCR_TG0_SHIFT)
+
+#define TCR_TG1_SHIFT		30
+#define TCR_TG1_MASK		(UL(3) << TCR_TG1_SHIFT)
+#define TCR_TG1_16K		(UL(1) << TCR_TG1_SHIFT)
+#define TCR_TG1_4K		(UL(2) << TCR_TG1_SHIFT)
+#define TCR_TG1_64K		(UL(3) << TCR_TG1_SHIFT)
+
+#define TCR_IPS_SHIFT		32
+#define TCR_IPS_MASK		(UL(7) << TCR_IPS_SHIFT)
+#define TCR_A1			(UL(1) << 22)
+#define TCR_ASID16		(UL(1) << 36)
+#define TCR_TBI0		(UL(1) << 37)
+#define TCR_TBI1		(UL(1) << 38)
+#define TCR_HA			(UL(1) << 39)
+#define TCR_HD			(UL(1) << 40)
+#define TCR_TBID1		(UL(1) << 52)
+#define TCR_NFD0		(UL(1) << 53)
+#define TCR_NFD1		(UL(1) << 54)
+#define TCR_E0PD0		(UL(1) << 55)
+#define TCR_E0PD1		(UL(1) << 56)
+#define TCR_TCMA0		(UL(1) << 57)
+#define TCR_TCMA1		(UL(1) << 58)
+
+/*
+ * TTBR.
+ */
+#ifdef CONFIG_ARM64_PA_BITS_52
+/*
+ * TTBR_ELx[1] is RES0 in this configuration.
+ */
+#define TTBR_BADDR_MASK_52	GENMASK_ULL(47, 2)
+#endif
+
+#ifdef CONFIG_ARM64_VA_BITS_52
+/* Must be at least 64-byte aligned to prevent corruption of the TTBR */
+#define TTBR1_BADDR_4852_OFFSET	(((UL(1) << (52 - PGDIR_SHIFT)) - \
+				 (UL(1) << (48 - PGDIR_SHIFT))) * 8)
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
new file mode 100644
index 000000000..eed814b00
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ */
+#ifndef __ASM_PGTABLE_PROT_H
+#define __ASM_PGTABLE_PROT_H
+
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+
+#include <linux/const.h>
+
+/*
+ * Software defined PTE bits definition.
+ */
+#define PTE_WRITE		(PTE_DBM)		 /* same as DBM (51) */
+#define PTE_SWP_EXCLUSIVE	(_AT(pteval_t, 1) << 2)	 /* only for swp ptes */
+#define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
+#define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
+#define PTE_DEVMAP		(_AT(pteval_t, 1) << 57)
+#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
+
+/*
+ * This bit indicates that the entry is present i.e. pmd_page()
+ * still points to a valid huge page in memory even if the pmd
+ * has been invalidated.
+ */
+#define PMD_PRESENT_INVALID	(_AT(pteval_t, 1) << 59) /* only when !PMD_SECT_VALID */
+
+#define _PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
+#define _PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
+
+#define PROT_DEFAULT		(_PROT_DEFAULT | PTE_MAYBE_NG)
+#define PROT_SECT_DEFAULT	(_PROT_SECT_DEFAULT | PMD_MAYBE_NG)
+
+#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
+#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
+#define PROT_NORMAL_TAGGED	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_TAGGED))
+
+#define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PTE_WRITE | PMD_ATTRINDX(MT_NORMAL))
+#define PROT_SECT_NORMAL_EXEC	(PROT_SECT_DEFAULT | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
+
+#define _PAGE_DEFAULT		(_PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))
+
+#define _PAGE_KERNEL		(PROT_NORMAL)
+#define _PAGE_KERNEL_RO		((PROT_NORMAL & ~PTE_WRITE) | PTE_RDONLY)
+#define _PAGE_KERNEL_ROX	((PROT_NORMAL & ~(PTE_WRITE | PTE_PXN)) | PTE_RDONLY)
+#define _PAGE_KERNEL_EXEC	(PROT_NORMAL & ~PTE_PXN)
+#define _PAGE_KERNEL_EXEC_CONT	((PROT_NORMAL & ~PTE_PXN) | PTE_CONT)
+
+#define _PAGE_SHARED		(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
+#define _PAGE_SHARED_EXEC	(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE)
+#define _PAGE_READONLY		(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
+#define _PAGE_READONLY_EXEC	(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN)
+#define _PAGE_EXECONLY		(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)
+
+#ifdef __ASSEMBLY__
+#define PTE_MAYBE_NG	0
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/cpufeature.h>
+#include <asm/pgtable-types.h>
+
+extern bool arm64_use_ng_mappings;
+
+#define PTE_MAYBE_NG		(arm64_use_ng_mappings ? PTE_NG : 0)
+#define PMD_MAYBE_NG		(arm64_use_ng_mappings ? PMD_SECT_NG : 0)
+
+/*
+ * If we have userspace only BTI we don't want to mark kernel pages
+ * guarded even if the system does support BTI.
+ */
+#ifdef CONFIG_ARM64_BTI_KERNEL
+#define PTE_MAYBE_GP		(system_supports_bti() ? PTE_GP : 0)
+#else
+#define PTE_MAYBE_GP		0
+#endif
+
+#define PAGE_KERNEL		__pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO		__pgprot(_PAGE_KERNEL_RO)
+#define PAGE_KERNEL_ROX		__pgprot(_PAGE_KERNEL_ROX)
+#define PAGE_KERNEL_EXEC	__pgprot(_PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_EXEC_CONT	__pgprot(_PAGE_KERNEL_EXEC_CONT)
+
+#define PAGE_S2_MEMATTR(attr, has_fwb)					\
+	({								\
+		u64 __val;						\
+		if (has_fwb)						\
+			__val = PTE_S2_MEMATTR(MT_S2_FWB_ ## attr);	\
+		else							\
+			__val = PTE_S2_MEMATTR(MT_S2_ ## attr);		\
+		__val;							\
+	 })
+
+#define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
+/* shared+writable pages are clean by default, hence PTE_RDONLY|PTE_WRITE */
+#define PAGE_SHARED		__pgprot(_PAGE_SHARED)
+#define PAGE_SHARED_EXEC	__pgprot(_PAGE_SHARED_EXEC)
+#define PAGE_READONLY		__pgprot(_PAGE_READONLY)
+#define PAGE_READONLY_EXEC	__pgprot(_PAGE_READONLY_EXEC)
+#define PAGE_EXECONLY		__pgprot(_PAGE_EXECONLY)
+
+#endif /* __ASSEMBLY__ */
+
+#define pte_pi_index(pte) ( \
+	((pte & BIT(PTE_PI_IDX_3)) >> (PTE_PI_IDX_3 - 3)) | \
+	((pte & BIT(PTE_PI_IDX_2)) >> (PTE_PI_IDX_2 - 2)) | \
+	((pte & BIT(PTE_PI_IDX_1)) >> (PTE_PI_IDX_1 - 1)) | \
+	((pte & BIT(PTE_PI_IDX_0)) >> (PTE_PI_IDX_0 - 0)))
+
+/*
+ * Page types used via Permission Indirection Extension (PIE). PIE uses
+ * the USER, DBM, PXN and UXN bits to to generate an index which is used
+ * to look up the actual permission in PIR_ELx and PIRE0_EL1. We define
+ * combinations we use on non-PIE systems with the same encoding, for
+ * convenience these are listed here as comments as are the unallocated
+ * encodings.
+ */
+
+/* 0: PAGE_DEFAULT                                                  */
+/* 1:                                                      PTE_USER */
+/* 2:                                          PTE_WRITE            */
+/* 3:                                          PTE_WRITE | PTE_USER */
+/* 4: PAGE_EXECONLY                  PTE_PXN                        */
+/* 5: PAGE_READONLY_EXEC             PTE_PXN |             PTE_USER */
+/* 6:                                PTE_PXN | PTE_WRITE            */
+/* 7: PAGE_SHARED_EXEC               PTE_PXN | PTE_WRITE | PTE_USER */
+/* 8: PAGE_KERNEL_ROX      PTE_UXN                                  */
+/* 9:                      PTE_UXN |                       PTE_USER */
+/* a: PAGE_KERNEL_EXEC     PTE_UXN |           PTE_WRITE            */
+/* b:                      PTE_UXN |           PTE_WRITE | PTE_USER */
+/* c: PAGE_KERNEL_RO       PTE_UXN | PTE_PXN                        */
+/* d: PAGE_READONLY        PTE_UXN | PTE_PXN |             PTE_USER */
+/* e: PAGE_KERNEL          PTE_UXN | PTE_PXN | PTE_WRITE            */
+/* f: PAGE_SHARED          PTE_UXN | PTE_PXN | PTE_WRITE | PTE_USER */
+
+#define PIE_E0	( \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_EXECONLY),      PIE_X_O) | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY_EXEC), PIE_RX)  | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED_EXEC),   PIE_RWX) | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY),      PIE_R)   | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED),        PIE_RW))
+
+#define PIE_E1	( \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_EXECONLY),      PIE_NONE_O) | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY_EXEC), PIE_R)      | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED_EXEC),   PIE_RW)     | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_READONLY),      PIE_R)      | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_SHARED),        PIE_RW)     | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL_ROX),    PIE_RX)     | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL_EXEC),   PIE_RWX)    | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL_RO),     PIE_R)      | \
+	PIRx_ELx_PERM(pte_pi_index(_PAGE_KERNEL),        PIE_RW))
+
+#endif /* __ASM_PGTABLE_PROT_H */
diff --git a/arch/arm64/include/asm/pgtable-types.h b/arch/arm64/include/asm/pgtable-types.h
new file mode 100644
index 000000000..b8f158ae2
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-types.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Page table types definitions.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#ifndef __ASM_PGTABLE_TYPES_H
+#define __ASM_PGTABLE_TYPES_H
+
+#include <asm/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pudval_t;
+typedef u64 p4dval_t;
+typedef u64 pgdval_t;
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { pteval_t pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) } )
+
+#if CONFIG_PGTABLE_LEVELS > 2
+typedef struct { pmdval_t pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) } )
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 3
+typedef struct { pudval_t pud; } pud_t;
+#define pud_val(x)	((x).pud)
+#define __pud(x)	((pud_t) { (x) } )
+#endif
+
+typedef struct { pgdval_t pgd; } pgd_t;
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) } )
+
+typedef struct { pteval_t pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#if CONFIG_PGTABLE_LEVELS == 2
+#include <asm-generic/pgtable-nopmd.h>
+#elif CONFIG_PGTABLE_LEVELS == 3
+#include <asm-generic/pgtable-nopud.h>
+#elif CONFIG_PGTABLE_LEVELS == 4
+#include <asm-generic/pgtable-nop4d.h>
+#endif
+
+#endif	/* __ASM_PGTABLE_TYPES_H */
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
new file mode 100644
index 000000000..07bdf5dd8
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable.h
@@ -0,0 +1,1121 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PGTABLE_H
+#define __ASM_PGTABLE_H
+
+#include <asm/bug.h>
+#include <asm/proc-fns.h>
+
+#include <asm/memory.h>
+#include <asm/mte.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable-prot.h>
+#include <asm/tlbflush.h>
+
+/*
+ * VMALLOC range.
+ *
+ * VMALLOC_START: beginning of the kernel vmalloc space
+ * VMALLOC_END: extends to the available space below vmemmap, PCI I/O space
+ *	and fixed mappings
+ */
+#define VMALLOC_START		(MODULES_END)
+#define VMALLOC_END		(VMEMMAP_START - SZ_256M)
+
+#define vmemmap			((struct page *)VMEMMAP_START - (memstart_addr >> PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+#include <asm/cmpxchg.h>
+#include <asm/fixmap.h>
+#include <linux/mmdebug.h>
+#include <linux/mm_types.h>
+#include <linux/sched.h>
+#include <linux/page_table_check.h>
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+
+/* Set stride and tlb_level in flush_*_tlb_range */
+#define flush_pmd_tlb_range(vma, addr, end)	\
+	__flush_tlb_range(vma, addr, end, PMD_SIZE, false, 2)
+#define flush_pud_tlb_range(vma, addr, end)	\
+	__flush_tlb_range(vma, addr, end, PUD_SIZE, false, 1)
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+static inline bool arch_thp_swp_supported(void)
+{
+	return !system_supports_mte();
+}
+#define arch_thp_swp_supported arch_thp_swp_supported
+
+/*
+ * Outside of a few very special situations (e.g. hibernation), we always
+ * use broadcast TLB invalidation instructions, therefore a spurious page
+ * fault on one CPU which has been handled concurrently by another CPU
+ * does not need to perform additional invalidation.
+ */
+#define flush_tlb_fix_spurious_fault(vma, address, ptep) do { } while (0)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr)	phys_to_page(__pa_symbol(empty_zero_page))
+
+#define pte_ERROR(e)	\
+	pr_err("%s:%d: bad pte %016llx.\n", __FILE__, __LINE__, pte_val(e))
+
+/*
+ * Macros to convert between a physical address and its placement in a
+ * page table entry, taking care of 52-bit addresses.
+ */
+#ifdef CONFIG_ARM64_PA_BITS_52
+static inline phys_addr_t __pte_to_phys(pte_t pte)
+{
+	return (pte_val(pte) & PTE_ADDR_LOW) |
+		((pte_val(pte) & PTE_ADDR_HIGH) << PTE_ADDR_HIGH_SHIFT);
+}
+static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
+{
+	return (phys | (phys >> PTE_ADDR_HIGH_SHIFT)) & PTE_ADDR_MASK;
+}
+#else
+#define __pte_to_phys(pte)	(pte_val(pte) & PTE_ADDR_MASK)
+#define __phys_to_pte_val(phys)	(phys)
+#endif
+
+#define pte_pfn(pte)		(__pte_to_phys(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot)	\
+	__pte(__phys_to_pte_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_clear(mm,addr,ptep)	set_pte(ptep, __pte(0))
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+
+/*
+ * The following only work if pte_present(). Undefined behaviour otherwise.
+ */
+#define pte_present(pte)	(!!(pte_val(pte) & (PTE_VALID | PTE_PROT_NONE)))
+#define pte_young(pte)		(!!(pte_val(pte) & PTE_AF))
+#define pte_special(pte)	(!!(pte_val(pte) & PTE_SPECIAL))
+#define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
+#define pte_rdonly(pte)		(!!(pte_val(pte) & PTE_RDONLY))
+#define pte_user(pte)		(!!(pte_val(pte) & PTE_USER))
+#define pte_user_exec(pte)	(!(pte_val(pte) & PTE_UXN))
+#define pte_cont(pte)		(!!(pte_val(pte) & PTE_CONT))
+#define pte_devmap(pte)		(!!(pte_val(pte) & PTE_DEVMAP))
+#define pte_tagged(pte)		((pte_val(pte) & PTE_ATTRINDX_MASK) == \
+				 PTE_ATTRINDX(MT_NORMAL_TAGGED))
+
+#define pte_cont_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + CONT_PTE_SIZE) & CONT_PTE_MASK;	\
+	(__boundary - 1 < (end) - 1) ? __boundary : (end);			\
+})
+
+#define pmd_cont_addr_end(addr, end)						\
+({	unsigned long __boundary = ((addr) + CONT_PMD_SIZE) & CONT_PMD_MASK;	\
+	(__boundary - 1 < (end) - 1) ? __boundary : (end);			\
+})
+
+#define pte_hw_dirty(pte)	(pte_write(pte) && !pte_rdonly(pte))
+#define pte_sw_dirty(pte)	(!!(pte_val(pte) & PTE_DIRTY))
+#define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))
+
+#define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
+/*
+ * Execute-only user mappings do not have the PTE_USER bit set. All valid
+ * kernel mappings have the PTE_UXN bit set.
+ */
+#define pte_valid_not_user(pte) \
+	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == (PTE_VALID | PTE_UXN))
+/*
+ * Could the pte be present in the TLB? We must check mm_tlb_flush_pending
+ * so that we don't erroneously return false for pages that have been
+ * remapped as PROT_NONE but are yet to be flushed from the TLB.
+ * Note that we can't make any assumptions based on the state of the access
+ * flag, since ptep_clear_flush_young() elides a DSB when invalidating the
+ * TLB.
+ */
+#define pte_accessible(mm, pte)	\
+	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte))
+
+/*
+ * p??_access_permitted() is true for valid user mappings (PTE_USER
+ * bit set, subject to the write permission check). For execute-only
+ * mappings, like PROT_EXEC with EPAN (both PTE_USER and PTE_UXN bits
+ * not set) must return false. PROT_NONE mappings do not have the
+ * PTE_VALID bit set.
+ */
+#define pte_access_permitted(pte, write) \
+	(((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER)) && (!(write) || pte_write(pte)))
+#define pmd_access_permitted(pmd, write) \
+	(pte_access_permitted(pmd_pte(pmd), (write)))
+#define pud_access_permitted(pud, write) \
+	(pte_access_permitted(pud_pte(pud), (write)))
+
+static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
+{
+	pte_val(pte) &= ~pgprot_val(prot);
+	return pte;
+}
+
+static inline pte_t set_pte_bit(pte_t pte, pgprot_t prot)
+{
+	pte_val(pte) |= pgprot_val(prot);
+	return pte;
+}
+
+static inline pmd_t clear_pmd_bit(pmd_t pmd, pgprot_t prot)
+{
+	pmd_val(pmd) &= ~pgprot_val(prot);
+	return pmd;
+}
+
+static inline pmd_t set_pmd_bit(pmd_t pmd, pgprot_t prot)
+{
+	pmd_val(pmd) |= pgprot_val(prot);
+	return pmd;
+}
+
+static inline pte_t pte_mkwrite_novma(pte_t pte)
+{
+	pte = set_pte_bit(pte, __pgprot(PTE_WRITE));
+	pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	pte = clear_pte_bit(pte, __pgprot(PTE_DIRTY));
+	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
+
+	if (pte_write(pte))
+		pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
+
+	return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	/*
+	 * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
+	 * clear), set the PTE_DIRTY bit.
+	 */
+	if (pte_hw_dirty(pte))
+		pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
+
+	pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
+	pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return clear_pte_bit(pte, __pgprot(PTE_AF));
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(PTE_AF));
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(PTE_SPECIAL));
+}
+
+static inline pte_t pte_mkcont(pte_t pte)
+{
+	pte = set_pte_bit(pte, __pgprot(PTE_CONT));
+	return set_pte_bit(pte, __pgprot(PTE_TYPE_PAGE));
+}
+
+static inline pte_t pte_mknoncont(pte_t pte)
+{
+	return clear_pte_bit(pte, __pgprot(PTE_CONT));
+}
+
+static inline pte_t pte_mkpresent(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(PTE_VALID));
+}
+
+static inline pmd_t pmd_mkcont(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | PMD_SECT_CONT);
+}
+
+static inline pte_t pte_mkdevmap(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(PTE_DEVMAP | PTE_SPECIAL));
+}
+
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	WRITE_ONCE(*ptep, pte);
+
+	/*
+	 * Only if the new pte is valid and kernel, otherwise TLB maintenance
+	 * or update_mmu_cache() have the necessary barriers.
+	 */
+	if (pte_valid_not_user(pte)) {
+		dsb(ishst);
+		isb();
+	}
+}
+
+extern void __sync_icache_dcache(pte_t pteval);
+bool pgattr_change_is_safe(u64 old, u64 new);
+
+/*
+ * PTE bits configuration in the presence of hardware Dirty Bit Management
+ * (PTE_WRITE == PTE_DBM):
+ *
+ * Dirty  Writable | PTE_RDONLY  PTE_WRITE  PTE_DIRTY (sw)
+ *   0      0      |   1           0          0
+ *   0      1      |   1           1          0
+ *   1      0      |   1           0          1
+ *   1      1      |   0           1          x
+ *
+ * When hardware DBM is not present, the sofware PTE_DIRTY bit is updated via
+ * the page fault mechanism. Checking the dirty status of a pte becomes:
+ *
+ *   PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY)
+ */
+
+static inline void __check_safe_pte_update(struct mm_struct *mm, pte_t *ptep,
+					   pte_t pte)
+{
+	pte_t old_pte;
+
+	if (!IS_ENABLED(CONFIG_DEBUG_VM))
+		return;
+
+	old_pte = READ_ONCE(*ptep);
+
+	if (!pte_valid(old_pte) || !pte_valid(pte))
+		return;
+	if (mm != current->active_mm && atomic_read(&mm->mm_users) <= 1)
+		return;
+
+	/*
+	 * Check for potential race with hardware updates of the pte
+	 * (ptep_set_access_flags safely changes valid ptes without going
+	 * through an invalid entry).
+	 */
+	VM_WARN_ONCE(!pte_young(pte),
+		     "%s: racy access flag clearing: 0x%016llx -> 0x%016llx",
+		     __func__, pte_val(old_pte), pte_val(pte));
+	VM_WARN_ONCE(pte_write(old_pte) && !pte_dirty(pte),
+		     "%s: racy dirty state clearing: 0x%016llx -> 0x%016llx",
+		     __func__, pte_val(old_pte), pte_val(pte));
+	VM_WARN_ONCE(!pgattr_change_is_safe(pte_val(old_pte), pte_val(pte)),
+		     "%s: unsafe attribute change: 0x%016llx -> 0x%016llx",
+		     __func__, pte_val(old_pte), pte_val(pte));
+}
+
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte)
+{
+	if (pte_present(pte) && pte_user_exec(pte) && !pte_special(pte))
+		__sync_icache_dcache(pte);
+
+	/*
+	 * If the PTE would provide user space access to the tags associated
+	 * with it then ensure that the MTE tags are synchronised.  Although
+	 * pte_access_permitted() returns false for exec only mappings, they
+	 * don't expose tags (instruction fetches don't check tags).
+	 */
+	if (system_supports_mte() && pte_access_permitted(pte, false) &&
+	    !pte_special(pte) && pte_tagged(pte))
+		mte_sync_tags(pte);
+
+	__check_safe_pte_update(mm, ptep, pte);
+
+	set_pte(ptep, pte);
+}
+
+static inline void set_ptes(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte, unsigned int nr)
+{
+	page_table_check_ptes_set(mm, ptep, pte, nr);
+
+	for (;;) {
+		__set_pte_at(mm, addr, ptep, pte);
+		if (--nr == 0)
+			break;
+		ptep++;
+		addr += PAGE_SIZE;
+		pte_val(pte) += PAGE_SIZE;
+	}
+}
+#define set_ptes set_ptes
+
+/*
+ * Huge pte definitions.
+ */
+#define pte_mkhuge(pte)		(__pte(pte_val(pte) & ~PTE_TABLE_BIT))
+
+/*
+ * Hugetlb definitions.
+ */
+#define HUGE_MAX_HSTATE		4
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1, UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+static inline pte_t pgd_pte(pgd_t pgd)
+{
+	return __pte(pgd_val(pgd));
+}
+
+static inline pte_t p4d_pte(p4d_t p4d)
+{
+	return __pte(p4d_val(p4d));
+}
+
+static inline pte_t pud_pte(pud_t pud)
+{
+	return __pte(pud_val(pud));
+}
+
+static inline pud_t pte_pud(pte_t pte)
+{
+	return __pud(pte_val(pte));
+}
+
+static inline pmd_t pud_pmd(pud_t pud)
+{
+	return __pmd(pud_val(pud));
+}
+
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
+static inline pmd_t pte_pmd(pte_t pte)
+{
+	return __pmd(pte_val(pte));
+}
+
+static inline pgprot_t mk_pud_sect_prot(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~PUD_TABLE_BIT) | PUD_TYPE_SECT);
+}
+
+static inline pgprot_t mk_pmd_sect_prot(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~PMD_TABLE_BIT) | PMD_TYPE_SECT);
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	return set_pte_bit(pte, __pgprot(PTE_SWP_EXCLUSIVE));
+}
+
+static inline int pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & PTE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	return clear_pte_bit(pte, __pgprot(PTE_SWP_EXCLUSIVE));
+}
+
+/*
+ * Select all bits except the pfn
+ */
+static inline pgprot_t pte_pgprot(pte_t pte)
+{
+	unsigned long pfn = pte_pfn(pte);
+
+	return __pgprot(pte_val(pfn_pte(pfn, __pgprot(0))) ^ pte_val(pte));
+}
+
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * See the comment in include/linux/pgtable.h
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) & (PTE_VALID | PTE_PROT_NONE)) == PTE_PROT_NONE;
+}
+
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif
+
+#define pmd_present_invalid(pmd)     (!!(pmd_val(pmd) & PMD_PRESENT_INVALID))
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return pte_present(pmd_pte(pmd)) || pmd_present_invalid(pmd);
+}
+
+/*
+ * THP definitions.
+ */
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static inline int pmd_trans_huge(pmd_t pmd)
+{
+	return pmd_val(pmd) && pmd_present(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
+#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
+#define pmd_valid(pmd)		pte_valid(pmd_pte(pmd))
+#define pmd_user(pmd)		pte_user(pmd_pte(pmd))
+#define pmd_user_exec(pmd)	pte_user_exec(pmd_pte(pmd))
+#define pmd_cont(pmd)		pte_cont(pmd_pte(pmd))
+#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_mkwrite_novma(pmd)	pte_pmd(pte_mkwrite_novma(pmd_pte(pmd)))
+#define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+
+static inline pmd_t pmd_mkinvalid(pmd_t pmd)
+{
+	pmd = set_pmd_bit(pmd, __pgprot(PMD_PRESENT_INVALID));
+	pmd = clear_pmd_bit(pmd, __pgprot(PMD_SECT_VALID));
+
+	return pmd;
+}
+
+#define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
+
+#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
+
+#define pmd_mkhuge(pmd)		(__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define pmd_devmap(pmd)		pte_devmap(pmd_pte(pmd))
+#endif
+static inline pmd_t pmd_mkdevmap(pmd_t pmd)
+{
+	return pte_pmd(set_pte_bit(pmd_pte(pmd), __pgprot(PTE_DEVMAP)));
+}
+
+#define __pmd_to_phys(pmd)	__pte_to_phys(pmd_pte(pmd))
+#define __phys_to_pmd_val(phys)	__phys_to_pte_val(phys)
+#define pmd_pfn(pmd)		((__pmd_to_phys(pmd) & PMD_MASK) >> PAGE_SHIFT)
+#define pfn_pmd(pfn,prot)	__pmd(__phys_to_pmd_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
+
+#define pud_young(pud)		pte_young(pud_pte(pud))
+#define pud_mkyoung(pud)	pte_pud(pte_mkyoung(pud_pte(pud)))
+#define pud_write(pud)		pte_write(pud_pte(pud))
+
+#define pud_mkhuge(pud)		(__pud(pud_val(pud) & ~PUD_TABLE_BIT))
+
+#define __pud_to_phys(pud)	__pte_to_phys(pud_pte(pud))
+#define __phys_to_pud_val(phys)	__phys_to_pte_val(phys)
+#define pud_pfn(pud)		((__pud_to_phys(pud) & PUD_MASK) >> PAGE_SHIFT)
+#define pfn_pud(pfn,prot)	__pud(__phys_to_pud_val((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
+			      pmd_t *pmdp, pmd_t pmd)
+{
+	page_table_check_pmd_set(mm, pmdp, pmd);
+	return __set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd));
+}
+
+static inline void set_pud_at(struct mm_struct *mm, unsigned long addr,
+			      pud_t *pudp, pud_t pud)
+{
+	page_table_check_pud_set(mm, pudp, pud);
+	return __set_pte_at(mm, addr, (pte_t *)pudp, pud_pte(pud));
+}
+
+#define __p4d_to_phys(p4d)	__pte_to_phys(p4d_pte(p4d))
+#define __phys_to_p4d_val(phys)	__phys_to_pte_val(phys)
+
+#define __pgd_to_phys(pgd)	__pte_to_phys(pgd_pte(pgd))
+#define __phys_to_pgd_val(phys)	__phys_to_pte_val(phys)
+
+#define __pgprot_modify(prot,mask,bits) \
+	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
+#define pgprot_nx(prot) \
+	__pgprot_modify(prot, PTE_MAYBE_GP, PTE_PXN)
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN)
+#define pgprot_writecombine(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN)
+#define pgprot_device(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_PXN | PTE_UXN)
+#define pgprot_tagged(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_TAGGED))
+#define pgprot_mhp	pgprot_tagged
+/*
+ * DMA allocations for non-coherent devices use what the Arm architecture calls
+ * "Normal non-cacheable" memory, which permits speculation, unaligned accesses
+ * and merging of writes.  This is different from "Device-nGnR[nE]" memory which
+ * is intended for MMIO and thus forbids speculation, preserves access size,
+ * requires strict alignment and can also force write responses to come from the
+ * endpoint.
+ */
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, PTE_ATTRINDX_MASK, \
+			PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN)
+
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+
+#define pmd_table(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
+				 PMD_TYPE_TABLE)
+#define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
+				 PMD_TYPE_SECT)
+#define pmd_leaf(pmd)		(pmd_present(pmd) && !pmd_table(pmd))
+#define pmd_bad(pmd)		(!pmd_table(pmd))
+
+#define pmd_leaf_size(pmd)	(pmd_cont(pmd) ? CONT_PMD_SIZE : PMD_SIZE)
+#define pte_leaf_size(pte)	(pte_cont(pte) ? CONT_PTE_SIZE : PAGE_SIZE)
+
+#if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
+static inline bool pud_sect(pud_t pud) { return false; }
+static inline bool pud_table(pud_t pud) { return true; }
+#else
+#define pud_sect(pud)		((pud_val(pud) & PUD_TYPE_MASK) == \
+				 PUD_TYPE_SECT)
+#define pud_table(pud)		((pud_val(pud) & PUD_TYPE_MASK) == \
+				 PUD_TYPE_TABLE)
+#endif
+
+extern pgd_t init_pg_dir[PTRS_PER_PGD];
+extern pgd_t init_pg_end[];
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
+extern pgd_t tramp_pg_dir[PTRS_PER_PGD];
+extern pgd_t reserved_pg_dir[PTRS_PER_PGD];
+
+extern void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd);
+
+static inline bool in_swapper_pgdir(void *addr)
+{
+	return ((unsigned long)addr & PAGE_MASK) ==
+	        ((unsigned long)swapper_pg_dir & PAGE_MASK);
+}
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+#ifdef __PAGETABLE_PMD_FOLDED
+	if (in_swapper_pgdir(pmdp)) {
+		set_swapper_pgd((pgd_t *)pmdp, __pgd(pmd_val(pmd)));
+		return;
+	}
+#endif /* __PAGETABLE_PMD_FOLDED */
+
+	WRITE_ONCE(*pmdp, pmd);
+
+	if (pmd_valid(pmd)) {
+		dsb(ishst);
+		isb();
+	}
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	set_pmd(pmdp, __pmd(0));
+}
+
+static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
+{
+	return __pmd_to_phys(pmd);
+}
+
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+	return (unsigned long)__va(pmd_page_paddr(pmd));
+}
+
+/* Find an entry in the third-level page table. */
+#define pte_offset_phys(dir,addr)	(pmd_page_paddr(READ_ONCE(*(dir))) + pte_index(addr) * sizeof(pte_t))
+
+#define pte_set_fixmap(addr)		((pte_t *)set_fixmap_offset(FIX_PTE, addr))
+#define pte_set_fixmap_offset(pmd, addr)	pte_set_fixmap(pte_offset_phys(pmd, addr))
+#define pte_clear_fixmap()		clear_fixmap(FIX_PTE)
+
+#define pmd_page(pmd)			phys_to_page(__pmd_to_phys(pmd))
+
+/* use ONLY for statically allocated translation tables */
+#define pte_offset_kimg(dir,addr)	((pte_t *)__phys_to_kimg(pte_offset_phys((dir), (addr))))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+#define pmd_ERROR(e)	\
+	pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
+
+#define pud_none(pud)		(!pud_val(pud))
+#define pud_bad(pud)		(!pud_table(pud))
+#define pud_present(pud)	pte_present(pud_pte(pud))
+#define pud_leaf(pud)		(pud_present(pud) && !pud_table(pud))
+#define pud_valid(pud)		pte_valid(pud_pte(pud))
+#define pud_user(pud)		pte_user(pud_pte(pud))
+#define pud_user_exec(pud)	pte_user_exec(pud_pte(pud))
+
+static inline void set_pud(pud_t *pudp, pud_t pud)
+{
+#ifdef __PAGETABLE_PUD_FOLDED
+	if (in_swapper_pgdir(pudp)) {
+		set_swapper_pgd((pgd_t *)pudp, __pgd(pud_val(pud)));
+		return;
+	}
+#endif /* __PAGETABLE_PUD_FOLDED */
+
+	WRITE_ONCE(*pudp, pud);
+
+	if (pud_valid(pud)) {
+		dsb(ishst);
+		isb();
+	}
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	set_pud(pudp, __pud(0));
+}
+
+static inline phys_addr_t pud_page_paddr(pud_t pud)
+{
+	return __pud_to_phys(pud);
+}
+
+static inline pmd_t *pud_pgtable(pud_t pud)
+{
+	return (pmd_t *)__va(pud_page_paddr(pud));
+}
+
+/* Find an entry in the second-level page table. */
+#define pmd_offset_phys(dir, addr)	(pud_page_paddr(READ_ONCE(*(dir))) + pmd_index(addr) * sizeof(pmd_t))
+
+#define pmd_set_fixmap(addr)		((pmd_t *)set_fixmap_offset(FIX_PMD, addr))
+#define pmd_set_fixmap_offset(pud, addr)	pmd_set_fixmap(pmd_offset_phys(pud, addr))
+#define pmd_clear_fixmap()		clear_fixmap(FIX_PMD)
+
+#define pud_page(pud)			phys_to_page(__pud_to_phys(pud))
+
+/* use ONLY for statically allocated translation tables */
+#define pmd_offset_kimg(dir,addr)	((pmd_t *)__phys_to_kimg(pmd_offset_phys((dir), (addr))))
+
+#else
+
+#define pud_page_paddr(pud)	({ BUILD_BUG(); 0; })
+#define pud_user_exec(pud)	pud_user(pud) /* Always 0 with folding */
+
+/* Match pmd_offset folding in <asm/generic/pgtable-nopmd.h> */
+#define pmd_set_fixmap(addr)		NULL
+#define pmd_set_fixmap_offset(pudp, addr)	((pmd_t *)pudp)
+#define pmd_clear_fixmap()
+
+#define pmd_offset_kimg(dir,addr)	((pmd_t *)dir)
+
+#endif	/* CONFIG_PGTABLE_LEVELS > 2 */
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+#define pud_ERROR(e)	\
+	pr_err("%s:%d: bad pud %016llx.\n", __FILE__, __LINE__, pud_val(e))
+
+#define p4d_none(p4d)		(!p4d_val(p4d))
+#define p4d_bad(p4d)		(!(p4d_val(p4d) & 2))
+#define p4d_present(p4d)	(p4d_val(p4d))
+
+static inline void set_p4d(p4d_t *p4dp, p4d_t p4d)
+{
+	if (in_swapper_pgdir(p4dp)) {
+		set_swapper_pgd((pgd_t *)p4dp, __pgd(p4d_val(p4d)));
+		return;
+	}
+
+	WRITE_ONCE(*p4dp, p4d);
+	dsb(ishst);
+	isb();
+}
+
+static inline void p4d_clear(p4d_t *p4dp)
+{
+	set_p4d(p4dp, __p4d(0));
+}
+
+static inline phys_addr_t p4d_page_paddr(p4d_t p4d)
+{
+	return __p4d_to_phys(p4d);
+}
+
+static inline pud_t *p4d_pgtable(p4d_t p4d)
+{
+	return (pud_t *)__va(p4d_page_paddr(p4d));
+}
+
+/* Find an entry in the first-level page table. */
+#define pud_offset_phys(dir, addr)	(p4d_page_paddr(READ_ONCE(*(dir))) + pud_index(addr) * sizeof(pud_t))
+
+#define pud_set_fixmap(addr)		((pud_t *)set_fixmap_offset(FIX_PUD, addr))
+#define pud_set_fixmap_offset(p4d, addr)	pud_set_fixmap(pud_offset_phys(p4d, addr))
+#define pud_clear_fixmap()		clear_fixmap(FIX_PUD)
+
+#define p4d_page(p4d)		pfn_to_page(__phys_to_pfn(__p4d_to_phys(p4d)))
+
+/* use ONLY for statically allocated translation tables */
+#define pud_offset_kimg(dir,addr)	((pud_t *)__phys_to_kimg(pud_offset_phys((dir), (addr))))
+
+#else
+
+#define p4d_page_paddr(p4d)	({ BUILD_BUG(); 0;})
+#define pgd_page_paddr(pgd)	({ BUILD_BUG(); 0;})
+
+/* Match pud_offset folding in <asm/generic/pgtable-nopud.h> */
+#define pud_set_fixmap(addr)		NULL
+#define pud_set_fixmap_offset(pgdp, addr)	((pud_t *)pgdp)
+#define pud_clear_fixmap()
+
+#define pud_offset_kimg(dir,addr)	((pud_t *)dir)
+
+#endif  /* CONFIG_PGTABLE_LEVELS > 3 */
+
+#define pgd_ERROR(e)	\
+	pr_err("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
+
+#define pgd_set_fixmap(addr)	((pgd_t *)set_fixmap_offset(FIX_PGD, addr))
+#define pgd_clear_fixmap()	clear_fixmap(FIX_PGD)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	/*
+	 * Normal and Normal-Tagged are two different memory types and indices
+	 * in MAIR_EL1. The mask below has to include PTE_ATTRINDX_MASK.
+	 */
+	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
+			      PTE_PROT_NONE | PTE_VALID | PTE_WRITE | PTE_GP |
+			      PTE_ATTRINDX_MASK;
+	/* preserve the hardware dirty information */
+	if (pte_hw_dirty(pte))
+		pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
+
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	/*
+	 * If we end up clearing hw dirtiness for a sw-dirty PTE, set hardware
+	 * dirtiness again.
+	 */
+	if (pte_sw_dirty(pte))
+		pte = pte_mkdirty(pte);
+	return pte;
+}
+
+static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
+{
+	return pte_pmd(pte_modify(pmd_pte(pmd), newprot));
+}
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pte_t *ptep,
+				 pte_t entry, int dirty);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
+					unsigned long address, pmd_t *pmdp,
+					pmd_t entry, int dirty)
+{
+	return ptep_set_access_flags(vma, address, (pte_t *)pmdp, pmd_pte(entry), dirty);
+}
+
+static inline int pud_devmap(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pgd_devmap(pgd_t pgd)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PAGE_TABLE_CHECK
+static inline bool pte_user_accessible_page(pte_t pte)
+{
+	return pte_present(pte) && (pte_user(pte) || pte_user_exec(pte));
+}
+
+static inline bool pmd_user_accessible_page(pmd_t pmd)
+{
+	return pmd_leaf(pmd) && !pmd_present_invalid(pmd) && (pmd_user(pmd) || pmd_user_exec(pmd));
+}
+
+static inline bool pud_user_accessible_page(pud_t pud)
+{
+	return pud_leaf(pud) && (pud_user(pud) || pud_user_exec(pud));
+}
+#endif
+
+/*
+ * Atomic pte/pmd modifications.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(pte_t *ptep)
+{
+	pte_t old_pte, pte;
+
+	pte = READ_ONCE(*ptep);
+	do {
+		old_pte = pte;
+		pte = pte_mkold(pte);
+		pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
+					       pte_val(old_pte), pte_val(pte));
+	} while (pte_val(pte) != pte_val(old_pte));
+
+	return pte_young(pte);
+}
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long address,
+					    pte_t *ptep)
+{
+	return __ptep_test_and_clear_young(ptep);
+}
+
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
+					 unsigned long address, pte_t *ptep)
+{
+	int young = ptep_test_and_clear_young(vma, address, ptep);
+
+	if (young) {
+		/*
+		 * We can elide the trailing DSB here since the worst that can
+		 * happen is that a CPU continues to use the young entry in its
+		 * TLB and we mistakenly reclaim the associated page. The
+		 * window for such an event is bounded by the next
+		 * context-switch, which provides a DSB to complete the TLB
+		 * invalidation.
+		 */
+		flush_tlb_page_nosync(vma, address);
+	}
+
+	return young;
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
+static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long address,
+					    pmd_t *pmdp)
+{
+	return ptep_test_and_clear_young(vma, address, (pte_t *)pmdp);
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long address, pte_t *ptep)
+{
+	pte_t pte = __pte(xchg_relaxed(&pte_val(*ptep), 0));
+
+	page_table_check_pte_clear(mm, pte);
+
+	return pte;
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
+static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
+					    unsigned long address, pmd_t *pmdp)
+{
+	pmd_t pmd = __pmd(xchg_relaxed(&pmd_val(*pmdp), 0));
+
+	page_table_check_pmd_clear(mm, pmd);
+
+	return pmd;
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+/*
+ * ptep_set_wrprotect - mark read-only while trasferring potential hardware
+ * dirty status (PTE_DBM && !PTE_RDONLY) to the software PTE_DIRTY bit.
+ */
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long address, pte_t *ptep)
+{
+	pte_t old_pte, pte;
+
+	pte = READ_ONCE(*ptep);
+	do {
+		old_pte = pte;
+		pte = pte_wrprotect(pte);
+		pte_val(pte) = cmpxchg_relaxed(&pte_val(*ptep),
+					       pte_val(old_pte), pte_val(pte));
+	} while (pte_val(pte) != pte_val(old_pte));
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm,
+				      unsigned long address, pmd_t *pmdp)
+{
+	ptep_set_wrprotect(mm, address, (pte_t *)pmdp);
+}
+
+#define pmdp_establish pmdp_establish
+static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
+		unsigned long address, pmd_t *pmdp, pmd_t pmd)
+{
+	page_table_check_pmd_set(vma->vm_mm, pmdp, pmd);
+	return __pmd(xchg_relaxed(&pmd_val(*pmdp), pmd_val(pmd)));
+}
+#endif
+
+/*
+ * Encode and decode a swap entry:
+ *	bits 0-1:	present (must be zero)
+ *	bits 2:		remember PG_anon_exclusive
+ *	bits 3-7:	swap type
+ *	bits 8-57:	swap offset
+ *	bit  58:	PTE_PROT_NONE (must be zero)
+ */
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		5
+#define __SWP_OFFSET_BITS	50
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+#define __SWP_OFFSET_MASK	((1UL << __SWP_OFFSET_BITS) - 1)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		(((x).val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
+#define __pmd_to_swp_entry(pmd)		((swp_entry_t) { pmd_val(pmd) })
+#define __swp_entry_to_pmd(swp)		__pmd((swp).val)
+#endif /* CONFIG_ARCH_ENABLE_THP_MIGRATION */
+
+/*
+ * Ensure that there are not more swap files than can be encoded in the kernel
+ * PTEs.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+#ifdef CONFIG_ARM64_MTE
+
+#define __HAVE_ARCH_PREPARE_TO_SWAP
+static inline int arch_prepare_to_swap(struct page *page)
+{
+	if (system_supports_mte())
+		return mte_save_tags(page);
+	return 0;
+}
+
+#define __HAVE_ARCH_SWAP_INVALIDATE
+static inline void arch_swap_invalidate_page(int type, pgoff_t offset)
+{
+	if (system_supports_mte())
+		mte_invalidate_tags(type, offset);
+}
+
+static inline void arch_swap_invalidate_area(int type)
+{
+	if (system_supports_mte())
+		mte_invalidate_tags_area(type);
+}
+
+#define __HAVE_ARCH_SWAP_RESTORE
+static inline void arch_swap_restore(swp_entry_t entry, struct folio *folio)
+{
+	if (system_supports_mte())
+		mte_restore_tags(entry, &folio->page);
+}
+
+#endif /* CONFIG_ARM64_MTE */
+
+/*
+ * On AArch64, the cache coherency is handled via the set_pte_at() function.
+ */
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+		struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+		unsigned int nr)
+{
+	/*
+	 * We don't do anything here, so there's a very small chance of
+	 * us retaking a user fault which we just fixed up. The alternative
+	 * is doing a dsb(ishst), but that penalises the fastpath.
+	 */
+}
+
+#define update_mmu_cache(vma, addr, ptep) \
+	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
+#define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
+
+#ifdef CONFIG_ARM64_PA_BITS_52
+#define phys_to_ttbr(addr)	(((addr) | ((addr) >> 46)) & TTBR_BADDR_MASK_52)
+#else
+#define phys_to_ttbr(addr)	(addr)
+#endif
+
+/*
+ * On arm64 without hardware Access Flag, copying from user will fail because
+ * the pte is old and cannot be marked young. So we always end up with zeroed
+ * page after fork() + CoW for pfn mappings. We don't always have a
+ * hardware-managed access flag on arm64.
+ */
+#define arch_has_hw_pte_young		cpu_has_hw_af
+
+/*
+ * Experimentally, it's cheap to set the access flag in hardware and we
+ * benefit from prefaulting mappings as 'old' to start with.
+ */
+#define arch_wants_old_prefaulted_pte	cpu_has_hw_af
+
+static inline bool pud_sect_supported(void)
+{
+	return PAGE_SIZE == SZ_4K;
+}
+
+
+#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
+#define ptep_modify_prot_start ptep_modify_prot_start
+extern pte_t ptep_modify_prot_start(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep);
+
+#define ptep_modify_prot_commit ptep_modify_prot_commit
+extern void ptep_modify_prot_commit(struct vm_area_struct *vma,
+				    unsigned long addr, pte_t *ptep,
+				    pte_t old_pte, pte_t new_pte);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_PGTABLE_H */
diff --git a/arch/arm64/include/asm/pointer_auth.h b/arch/arm64/include/asm/pointer_auth.h
new file mode 100644
index 000000000..d2e0306e6
--- /dev/null
+++ b/arch/arm64/include/asm/pointer_auth.h
@@ -0,0 +1,153 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_POINTER_AUTH_H
+#define __ASM_POINTER_AUTH_H
+
+#include <linux/bitops.h>
+#include <linux/prctl.h>
+#include <linux/random.h>
+
+#include <asm/cpufeature.h>
+#include <asm/memory.h>
+#include <asm/sysreg.h>
+
+/*
+ * The EL0/EL1 pointer bits used by a pointer authentication code.
+ * This is dependent on TBI0/TBI1 being enabled, or bits 63:56 would also apply.
+ */
+#define ptrauth_user_pac_mask()		GENMASK_ULL(54, vabits_actual)
+#define ptrauth_kernel_pac_mask()	GENMASK_ULL(63, vabits_actual)
+
+#define PR_PAC_ENABLED_KEYS_MASK                                               \
+	(PR_PAC_APIAKEY | PR_PAC_APIBKEY | PR_PAC_APDAKEY | PR_PAC_APDBKEY)
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+/*
+ * Each key is a 128-bit quantity which is split across a pair of 64-bit
+ * registers (Lo and Hi).
+ */
+struct ptrauth_key {
+	unsigned long lo, hi;
+};
+
+/*
+ * We give each process its own keys, which are shared by all threads. The keys
+ * are inherited upon fork(), and reinitialised upon exec*().
+ */
+struct ptrauth_keys_user {
+	struct ptrauth_key apia;
+	struct ptrauth_key apib;
+	struct ptrauth_key apda;
+	struct ptrauth_key apdb;
+	struct ptrauth_key apga;
+};
+
+#define __ptrauth_key_install_nosync(k, v)			\
+do {								\
+	struct ptrauth_key __pki_v = (v);			\
+	write_sysreg_s(__pki_v.lo, SYS_ ## k ## KEYLO_EL1);	\
+	write_sysreg_s(__pki_v.hi, SYS_ ## k ## KEYHI_EL1);	\
+} while (0)
+
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+
+struct ptrauth_keys_kernel {
+	struct ptrauth_key apia;
+};
+
+static __always_inline void ptrauth_keys_init_kernel(struct ptrauth_keys_kernel *keys)
+{
+	if (system_supports_address_auth())
+		get_random_bytes(&keys->apia, sizeof(keys->apia));
+}
+
+static __always_inline void ptrauth_keys_switch_kernel(struct ptrauth_keys_kernel *keys)
+{
+	if (!system_supports_address_auth())
+		return;
+
+	__ptrauth_key_install_nosync(APIA, keys->apia);
+	isb();
+}
+
+#endif /* CONFIG_ARM64_PTR_AUTH_KERNEL */
+
+static inline void ptrauth_keys_install_user(struct ptrauth_keys_user *keys)
+{
+	if (system_supports_address_auth()) {
+		__ptrauth_key_install_nosync(APIB, keys->apib);
+		__ptrauth_key_install_nosync(APDA, keys->apda);
+		__ptrauth_key_install_nosync(APDB, keys->apdb);
+	}
+
+	if (system_supports_generic_auth())
+		__ptrauth_key_install_nosync(APGA, keys->apga);
+}
+
+static inline void ptrauth_keys_init_user(struct ptrauth_keys_user *keys)
+{
+	if (system_supports_address_auth()) {
+		get_random_bytes(&keys->apia, sizeof(keys->apia));
+		get_random_bytes(&keys->apib, sizeof(keys->apib));
+		get_random_bytes(&keys->apda, sizeof(keys->apda));
+		get_random_bytes(&keys->apdb, sizeof(keys->apdb));
+	}
+
+	if (system_supports_generic_auth())
+		get_random_bytes(&keys->apga, sizeof(keys->apga));
+
+	ptrauth_keys_install_user(keys);
+}
+
+extern int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg);
+
+extern int ptrauth_set_enabled_keys(struct task_struct *tsk, unsigned long keys,
+				    unsigned long enabled);
+extern int ptrauth_get_enabled_keys(struct task_struct *tsk);
+
+static __always_inline void ptrauth_enable(void)
+{
+	if (!system_supports_address_auth())
+		return;
+	sysreg_clear_set(sctlr_el1, 0, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB |
+					SCTLR_ELx_ENDA | SCTLR_ELx_ENDB));
+	isb();
+}
+
+#define ptrauth_suspend_exit()                                                 \
+	ptrauth_keys_install_user(&current->thread.keys_user)
+
+#define ptrauth_thread_init_user()                                             \
+	do {                                                                   \
+		ptrauth_keys_init_user(&current->thread.keys_user);            \
+									       \
+		/* enable all keys */                                          \
+		if (system_supports_address_auth())                            \
+			ptrauth_set_enabled_keys(current,                      \
+						 PR_PAC_ENABLED_KEYS_MASK,     \
+						 PR_PAC_ENABLED_KEYS_MASK);    \
+	} while (0)
+
+#define ptrauth_thread_switch_user(tsk)                                        \
+	ptrauth_keys_install_user(&(tsk)->thread.keys_user)
+
+#else /* CONFIG_ARM64_PTR_AUTH */
+#define ptrauth_enable()
+#define ptrauth_prctl_reset_keys(tsk, arg)	(-EINVAL)
+#define ptrauth_set_enabled_keys(tsk, keys, enabled)	(-EINVAL)
+#define ptrauth_get_enabled_keys(tsk)	(-EINVAL)
+#define ptrauth_suspend_exit()
+#define ptrauth_thread_init_user()
+#define ptrauth_thread_switch_user(tsk)
+#endif /* CONFIG_ARM64_PTR_AUTH */
+
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+#define ptrauth_thread_init_kernel(tsk)					\
+	ptrauth_keys_init_kernel(&(tsk)->thread.keys_kernel)
+#define ptrauth_thread_switch_kernel(tsk)				\
+	ptrauth_keys_switch_kernel(&(tsk)->thread.keys_kernel)
+#else
+#define ptrauth_thread_init_kernel(tsk)
+#define ptrauth_thread_switch_kernel(tsk)
+#endif /* CONFIG_ARM64_PTR_AUTH_KERNEL */
+
+#endif /* __ASM_POINTER_AUTH_H */
diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
new file mode 100644
index 000000000..0159b625c
--- /dev/null
+++ b/arch/arm64/include/asm/preempt.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_PREEMPT_H
+#define __ASM_PREEMPT_H
+
+#include <linux/jump_label.h>
+#include <linux/thread_info.h>
+
+#define PREEMPT_NEED_RESCHED	BIT(32)
+#define PREEMPT_ENABLED	(PREEMPT_NEED_RESCHED)
+
+static inline int preempt_count(void)
+{
+	return READ_ONCE(current_thread_info()->preempt.count);
+}
+
+static inline void preempt_count_set(u64 pc)
+{
+	/* Preserve existing value of PREEMPT_NEED_RESCHED */
+	WRITE_ONCE(current_thread_info()->preempt.count, pc);
+}
+
+#define init_task_preempt_count(p) do { \
+	task_thread_info(p)->preempt_count = FORK_PREEMPT_COUNT; \
+} while (0)
+
+#define init_idle_preempt_count(p, cpu) do { \
+	task_thread_info(p)->preempt_count = PREEMPT_DISABLED; \
+} while (0)
+
+static inline void set_preempt_need_resched(void)
+{
+	current_thread_info()->preempt.need_resched = 0;
+}
+
+static inline void clear_preempt_need_resched(void)
+{
+	current_thread_info()->preempt.need_resched = 1;
+}
+
+static inline bool test_preempt_need_resched(void)
+{
+	return !current_thread_info()->preempt.need_resched;
+}
+
+static inline void __preempt_count_add(int val)
+{
+	u32 pc = READ_ONCE(current_thread_info()->preempt.count);
+	pc += val;
+	WRITE_ONCE(current_thread_info()->preempt.count, pc);
+}
+
+static inline void __preempt_count_sub(int val)
+{
+	u32 pc = READ_ONCE(current_thread_info()->preempt.count);
+	pc -= val;
+	WRITE_ONCE(current_thread_info()->preempt.count, pc);
+}
+
+static inline bool __preempt_count_dec_and_test(void)
+{
+	struct thread_info *ti = current_thread_info();
+	u64 pc = READ_ONCE(ti->preempt_count);
+
+	/* Update only the count field, leaving need_resched unchanged */
+	WRITE_ONCE(ti->preempt.count, --pc);
+
+	/*
+	 * If we wrote back all zeroes, then we're preemptible and in
+	 * need of a reschedule. Otherwise, we need to reload the
+	 * preempt_count in case the need_resched flag was cleared by an
+	 * interrupt occurring between the non-atomic READ_ONCE/WRITE_ONCE
+	 * pair.
+	 */
+	return !pc || !READ_ONCE(ti->preempt_count);
+}
+
+static inline bool should_resched(int preempt_offset)
+{
+	u64 pc = READ_ONCE(current_thread_info()->preempt_count);
+	return pc == preempt_offset;
+}
+
+#ifdef CONFIG_PREEMPTION
+
+void preempt_schedule(void);
+void preempt_schedule_notrace(void);
+
+#ifdef CONFIG_PREEMPT_DYNAMIC
+
+DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+void dynamic_preempt_schedule(void);
+#define __preempt_schedule()		dynamic_preempt_schedule()
+void dynamic_preempt_schedule_notrace(void);
+#define __preempt_schedule_notrace()	dynamic_preempt_schedule_notrace()
+
+#else /* CONFIG_PREEMPT_DYNAMIC */
+
+#define __preempt_schedule()		preempt_schedule()
+#define __preempt_schedule_notrace()	preempt_schedule_notrace()
+
+#endif /* CONFIG_PREEMPT_DYNAMIC */
+#endif /* CONFIG_PREEMPTION */
+
+#endif /* __ASM_PREEMPT_H */
diff --git a/arch/arm64/include/asm/probes.h b/arch/arm64/include/asm/probes.h
new file mode 100644
index 000000000..006946745
--- /dev/null
+++ b/arch/arm64/include/asm/probes.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/probes.h
+ *
+ * Copyright (C) 2013 Linaro Limited
+ */
+#ifndef _ARM_PROBES_H
+#define _ARM_PROBES_H
+
+#include <asm/insn.h>
+
+typedef u32 probe_opcode_t;
+typedef void (probes_handler_t) (u32 opcode, long addr, struct pt_regs *);
+
+/* architecture specific copy of original instruction */
+struct arch_probe_insn {
+	probe_opcode_t *insn;
+	pstate_check_t *pstate_cc;
+	probes_handler_t *handler;
+	/* restore address after step xol */
+	unsigned long restore;
+};
+#ifdef CONFIG_KPROBES
+typedef u32 kprobe_opcode_t;
+struct arch_specific_insn {
+	struct arch_probe_insn api;
+};
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/proc-fns.h b/arch/arm64/include/asm/proc-fns.h
new file mode 100644
index 000000000..0d5d1f052
--- /dev/null
+++ b/arch/arm64/include/asm/proc-fns.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/proc-fns.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PROCFNS_H
+#define __ASM_PROCFNS_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/page.h>
+
+struct cpu_suspend_ctx;
+
+extern void cpu_do_idle(void);
+extern void cpu_do_suspend(struct cpu_suspend_ctx *ptr);
+extern u64 cpu_do_resume(phys_addr_t ptr, u64 idmap_ttbr);
+
+#include <asm/memory.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PROCFNS_H */
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
new file mode 100644
index 000000000..e5bc54522
--- /dev/null
+++ b/arch/arm64/include/asm/processor.h
@@ -0,0 +1,399 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/processor.h
+ *
+ * Copyright (C) 1995-1999 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PROCESSOR_H
+#define __ASM_PROCESSOR_H
+
+/*
+ * On arm64 systems, unaligned accesses by the CPU are cheap, and so there is
+ * no point in shifting all network buffers by 2 bytes just to make some IP
+ * header fields appear aligned in memory, potentially sacrificing some DMA
+ * performance on some platforms.
+ */
+#define NET_IP_ALIGN	0
+
+#define MTE_CTRL_GCR_USER_EXCL_SHIFT	0
+#define MTE_CTRL_GCR_USER_EXCL_MASK	0xffff
+
+#define MTE_CTRL_TCF_SYNC		(1UL << 16)
+#define MTE_CTRL_TCF_ASYNC		(1UL << 17)
+#define MTE_CTRL_TCF_ASYMM		(1UL << 18)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/build_bug.h>
+#include <linux/cache.h>
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+#include <linux/thread_info.h>
+
+#include <vdso/processor.h>
+
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/kasan.h>
+#include <asm/lse.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pointer_auth.h>
+#include <asm/ptrace.h>
+#include <asm/spectre.h>
+#include <asm/types.h>
+
+/*
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
+ */
+
+#define DEFAULT_MAP_WINDOW_64	(UL(1) << VA_BITS_MIN)
+#define TASK_SIZE_64		(UL(1) << vabits_actual)
+#define TASK_SIZE_MAX		(UL(1) << VA_BITS)
+
+#ifdef CONFIG_COMPAT
+#if defined(CONFIG_ARM64_64K_PAGES) && defined(CONFIG_KUSER_HELPERS)
+/*
+ * With CONFIG_ARM64_64K_PAGES enabled, the last page is occupied
+ * by the compat vectors page.
+ */
+#define TASK_SIZE_32		UL(0x100000000)
+#else
+#define TASK_SIZE_32		(UL(0x100000000) - PAGE_SIZE)
+#endif /* CONFIG_ARM64_64K_PAGES */
+#define TASK_SIZE		(test_thread_flag(TIF_32BIT) ? \
+				TASK_SIZE_32 : TASK_SIZE_64)
+#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+				TASK_SIZE_32 : TASK_SIZE_64)
+#define DEFAULT_MAP_WINDOW	(test_thread_flag(TIF_32BIT) ? \
+				TASK_SIZE_32 : DEFAULT_MAP_WINDOW_64)
+#else
+#define TASK_SIZE		TASK_SIZE_64
+#define DEFAULT_MAP_WINDOW	DEFAULT_MAP_WINDOW_64
+#endif /* CONFIG_COMPAT */
+
+#ifdef CONFIG_ARM64_FORCE_52BIT
+#define STACK_TOP_MAX		TASK_SIZE_64
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 4))
+#else
+#define STACK_TOP_MAX		DEFAULT_MAP_WINDOW_64
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(DEFAULT_MAP_WINDOW / 4))
+#endif /* CONFIG_ARM64_FORCE_52BIT */
+
+#ifdef CONFIG_COMPAT
+#define AARCH32_VECTORS_BASE	0xffff0000
+#define STACK_TOP		(test_thread_flag(TIF_32BIT) ? \
+				AARCH32_VECTORS_BASE : STACK_TOP_MAX)
+#else
+#define STACK_TOP		STACK_TOP_MAX
+#endif /* CONFIG_COMPAT */
+
+#ifndef CONFIG_ARM64_FORCE_52BIT
+#define arch_get_mmap_end(addr, len, flags) \
+		(((addr) > DEFAULT_MAP_WINDOW) ? TASK_SIZE : DEFAULT_MAP_WINDOW)
+
+#define arch_get_mmap_base(addr, base) ((addr > DEFAULT_MAP_WINDOW) ? \
+					base + TASK_SIZE - DEFAULT_MAP_WINDOW :\
+					base)
+#endif /* CONFIG_ARM64_FORCE_52BIT */
+
+extern phys_addr_t arm64_dma_phys_limit;
+#define ARCH_LOW_ADDRESS_LIMIT	(arm64_dma_phys_limit - 1)
+
+struct debug_info {
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	/* Have we suspended stepping by a debugger? */
+	int			suspended_step;
+	/* Allow breakpoints and watchpoints to be disabled for this thread. */
+	int			bps_disabled;
+	int			wps_disabled;
+	/* Hardware breakpoints pinned to this task. */
+	struct perf_event	*hbp_break[ARM_MAX_BRP];
+	struct perf_event	*hbp_watch[ARM_MAX_WRP];
+#endif
+};
+
+enum vec_type {
+	ARM64_VEC_SVE = 0,
+	ARM64_VEC_SME,
+	ARM64_VEC_MAX,
+};
+
+enum fp_type {
+	FP_STATE_CURRENT,	/* Save based on current task state. */
+	FP_STATE_FPSIMD,
+	FP_STATE_SVE,
+};
+
+struct cpu_context {
+	unsigned long x19;
+	unsigned long x20;
+	unsigned long x21;
+	unsigned long x22;
+	unsigned long x23;
+	unsigned long x24;
+	unsigned long x25;
+	unsigned long x26;
+	unsigned long x27;
+	unsigned long x28;
+	unsigned long fp;
+	unsigned long sp;
+	unsigned long pc;
+};
+
+struct thread_struct {
+	struct cpu_context	cpu_context;	/* cpu context */
+
+	/*
+	 * Whitelisted fields for hardened usercopy:
+	 * Maintainers must ensure manually that this contains no
+	 * implicit padding.
+	 */
+	struct {
+		unsigned long	tp_value;	/* TLS register */
+		unsigned long	tp2_value;
+		struct user_fpsimd_state fpsimd_state;
+	} uw;
+
+	enum fp_type		fp_type;	/* registers FPSIMD or SVE? */
+	unsigned int		fpsimd_cpu;
+	void			*sve_state;	/* SVE registers, if any */
+	void			*sme_state;	/* ZA and ZT state, if any */
+	unsigned int		vl[ARM64_VEC_MAX];	/* vector length */
+	unsigned int		vl_onexec[ARM64_VEC_MAX]; /* vl after next exec */
+	unsigned long		fault_address;	/* fault info */
+	unsigned long		fault_code;	/* ESR_EL1 value */
+	struct debug_info	debug;		/* debugging */
+#ifdef CONFIG_ARM64_PTR_AUTH
+	struct ptrauth_keys_user	keys_user;
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+	struct ptrauth_keys_kernel	keys_kernel;
+#endif
+#endif
+#ifdef CONFIG_ARM64_MTE
+	u64			mte_ctrl;
+#endif
+	u64			sctlr_user;
+	u64			svcr;
+	u64			tpidr2_el0;
+};
+
+static inline unsigned int thread_get_vl(struct thread_struct *thread,
+					 enum vec_type type)
+{
+	return thread->vl[type];
+}
+
+static inline unsigned int thread_get_sve_vl(struct thread_struct *thread)
+{
+	return thread_get_vl(thread, ARM64_VEC_SVE);
+}
+
+static inline unsigned int thread_get_sme_vl(struct thread_struct *thread)
+{
+	return thread_get_vl(thread, ARM64_VEC_SME);
+}
+
+static inline unsigned int thread_get_cur_vl(struct thread_struct *thread)
+{
+	if (system_supports_sme() && (thread->svcr & SVCR_SM_MASK))
+		return thread_get_sme_vl(thread);
+	else
+		return thread_get_sve_vl(thread);
+}
+
+unsigned int task_get_vl(const struct task_struct *task, enum vec_type type);
+void task_set_vl(struct task_struct *task, enum vec_type type,
+		 unsigned long vl);
+void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
+			unsigned long vl);
+unsigned int task_get_vl_onexec(const struct task_struct *task,
+				enum vec_type type);
+
+static inline unsigned int task_get_sve_vl(const struct task_struct *task)
+{
+	return task_get_vl(task, ARM64_VEC_SVE);
+}
+
+static inline unsigned int task_get_sme_vl(const struct task_struct *task)
+{
+	return task_get_vl(task, ARM64_VEC_SME);
+}
+
+static inline void task_set_sve_vl(struct task_struct *task, unsigned long vl)
+{
+	task_set_vl(task, ARM64_VEC_SVE, vl);
+}
+
+static inline unsigned int task_get_sve_vl_onexec(const struct task_struct *task)
+{
+	return task_get_vl_onexec(task, ARM64_VEC_SVE);
+}
+
+static inline void task_set_sve_vl_onexec(struct task_struct *task,
+					  unsigned long vl)
+{
+	task_set_vl_onexec(task, ARM64_VEC_SVE, vl);
+}
+
+#define SCTLR_USER_MASK                                                        \
+	(SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | SCTLR_ELx_ENDA | SCTLR_ELx_ENDB |   \
+	 SCTLR_EL1_TCF0_MASK)
+
+static inline void arch_thread_struct_whitelist(unsigned long *offset,
+						unsigned long *size)
+{
+	/* Verify that there is no padding among the whitelisted fields: */
+	BUILD_BUG_ON(sizeof_field(struct thread_struct, uw) !=
+		     sizeof_field(struct thread_struct, uw.tp_value) +
+		     sizeof_field(struct thread_struct, uw.tp2_value) +
+		     sizeof_field(struct thread_struct, uw.fpsimd_state));
+
+	*offset = offsetof(struct thread_struct, uw);
+	*size = sizeof_field(struct thread_struct, uw);
+}
+
+#ifdef CONFIG_COMPAT
+#define task_user_tls(t)						\
+({									\
+	unsigned long *__tls;						\
+	if (is_compat_thread(task_thread_info(t)))			\
+		__tls = &(t)->thread.uw.tp2_value;			\
+	else								\
+		__tls = &(t)->thread.uw.tp_value;			\
+	__tls;								\
+ })
+#else
+#define task_user_tls(t)	(&(t)->thread.uw.tp_value)
+#endif
+
+/* Sync TPIDR_EL0 back to thread_struct for current */
+void tls_preserve_current_state(void);
+
+#define INIT_THREAD {				\
+	.fpsimd_cpu = NR_CPUS,			\
+}
+
+static inline void start_thread_common(struct pt_regs *regs, unsigned long pc)
+{
+	s32 previous_syscall = regs->syscallno;
+	memset(regs, 0, sizeof(*regs));
+	regs->syscallno = previous_syscall;
+	regs->pc = pc;
+
+	if (system_uses_irq_prio_masking())
+		regs->pmr_save = GIC_PRIO_IRQON;
+}
+
+static inline void start_thread(struct pt_regs *regs, unsigned long pc,
+				unsigned long sp)
+{
+	start_thread_common(regs, pc);
+	regs->pstate = PSR_MODE_EL0t;
+	spectre_v4_enable_task_mitigation(current);
+	regs->sp = sp;
+}
+
+#ifdef CONFIG_COMPAT
+static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc,
+				       unsigned long sp)
+{
+	start_thread_common(regs, pc);
+	regs->pstate = PSR_AA32_MODE_USR;
+	if (pc & 1)
+		regs->pstate |= PSR_AA32_T_BIT;
+
+#ifdef __AARCH64EB__
+	regs->pstate |= PSR_AA32_E_BIT;
+#endif
+
+	spectre_v4_enable_task_mitigation(current);
+	regs->compat_sp = sp;
+}
+#endif
+
+static __always_inline bool is_ttbr0_addr(unsigned long addr)
+{
+	/* entry assembly clears tags for TTBR0 addrs */
+	return addr < TASK_SIZE;
+}
+
+static __always_inline bool is_ttbr1_addr(unsigned long addr)
+{
+	/* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */
+	return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+unsigned long __get_wchan(struct task_struct *p);
+
+void update_sctlr_el1(u64 sctlr);
+
+/* Thread switching */
+extern struct task_struct *cpu_switch_to(struct task_struct *prev,
+					 struct task_struct *next);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	((unsigned long)task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)	user_stack_pointer(task_pt_regs(tsk))
+
+/*
+ * Prefetching support
+ */
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *ptr)
+{
+	asm volatile("prfm pldl1keep, %a0\n" : : "p" (ptr));
+}
+
+#define ARCH_HAS_PREFETCHW
+static inline void prefetchw(const void *ptr)
+{
+	asm volatile("prfm pstl1keep, %a0\n" : : "p" (ptr));
+}
+
+extern unsigned long __ro_after_init signal_minsigstksz; /* sigframe size */
+extern void __init minsigstksz_setup(void);
+
+/*
+ * Not at the top of the file due to a direct #include cycle between
+ * <asm/fpsimd.h> and <asm/processor.h>.  Deferring this #include
+ * ensures that contents of processor.h are visible to fpsimd.h even if
+ * processor.h is included first.
+ *
+ * These prctl helpers are the only things in this file that require
+ * fpsimd.h.  The core code expects them to be in this header.
+ */
+#include <asm/fpsimd.h>
+
+/* Userspace interface for PR_S[MV]E_{SET,GET}_VL prctl()s: */
+#define SVE_SET_VL(arg)	sve_set_current_vl(arg)
+#define SVE_GET_VL()	sve_get_current_vl()
+#define SME_SET_VL(arg)	sme_set_current_vl(arg)
+#define SME_GET_VL()	sme_get_current_vl()
+
+/* PR_PAC_RESET_KEYS prctl */
+#define PAC_RESET_KEYS(tsk, arg)	ptrauth_prctl_reset_keys(tsk, arg)
+
+/* PR_PAC_{SET,GET}_ENABLED_KEYS prctl */
+#define PAC_SET_ENABLED_KEYS(tsk, keys, enabled)				\
+	ptrauth_set_enabled_keys(tsk, keys, enabled)
+#define PAC_GET_ENABLED_KEYS(tsk) ptrauth_get_enabled_keys(tsk)
+
+#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
+/* PR_{SET,GET}_TAGGED_ADDR_CTRL prctl */
+long set_tagged_addr_ctrl(struct task_struct *task, unsigned long arg);
+long get_tagged_addr_ctrl(struct task_struct *task);
+#define SET_TAGGED_ADDR_CTRL(arg)	set_tagged_addr_ctrl(current, arg)
+#define GET_TAGGED_ADDR_CTRL()		get_tagged_addr_ctrl(current)
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/ptdump.h b/arch/arm64/include/asm/ptdump.h
new file mode 100644
index 000000000..581caac52
--- /dev/null
+++ b/arch/arm64/include/asm/ptdump.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014 ARM Ltd.
+ */
+#ifndef __ASM_PTDUMP_H
+#define __ASM_PTDUMP_H
+
+#ifdef CONFIG_PTDUMP_CORE
+
+#include <linux/mm_types.h>
+#include <linux/seq_file.h>
+
+struct addr_marker {
+	unsigned long start_address;
+	char *name;
+};
+
+struct ptdump_info {
+	struct mm_struct		*mm;
+	const struct addr_marker	*markers;
+	unsigned long			base_addr;
+};
+
+void ptdump_walk(struct seq_file *s, struct ptdump_info *info);
+#ifdef CONFIG_PTDUMP_DEBUGFS
+#define EFI_RUNTIME_MAP_END	DEFAULT_MAP_WINDOW_64
+void __init ptdump_debugfs_register(struct ptdump_info *info, const char *name);
+#else
+static inline void ptdump_debugfs_register(struct ptdump_info *info,
+					   const char *name) { }
+#endif
+void ptdump_check_wx(void);
+#endif /* CONFIG_PTDUMP_CORE */
+
+#ifdef CONFIG_DEBUG_WX
+#define debug_checkwx()	ptdump_check_wx()
+#else
+#define debug_checkwx()	do { } while (0)
+#endif
+
+#endif /* __ASM_PTDUMP_H */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
new file mode 100644
index 000000000..47ec58031
--- /dev/null
+++ b/arch/arm64/include/asm/ptrace.h
@@ -0,0 +1,393 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/ptrace.h
+ *
+ * Copyright (C) 1996-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_PTRACE_H
+#define __ASM_PTRACE_H
+
+#include <asm/cpufeature.h>
+
+#include <uapi/asm/ptrace.h>
+
+/* Current Exception Level values, as contained in CurrentEL */
+#define CurrentEL_EL1		(1 << 2)
+#define CurrentEL_EL2		(2 << 2)
+
+#define INIT_PSTATE_EL1 \
+	(PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | PSR_MODE_EL1h)
+#define INIT_PSTATE_EL2 \
+	(PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT | PSR_MODE_EL2h)
+
+/*
+ * PMR values used to mask/unmask interrupts.
+ *
+ * GIC priority masking works as follows: if an IRQ's priority is a higher value
+ * than the value held in PMR, that IRQ is masked. Lowering the value of PMR
+ * means masking more IRQs (or at least that the same IRQs remain masked).
+ *
+ * To mask interrupts, we clear the most significant bit of PMR.
+ *
+ * Some code sections either automatically switch back to PSR.I or explicitly
+ * require to not use priority masking. If bit GIC_PRIO_PSR_I_SET is included
+ * in the priority mask, it indicates that PSR.I should be set and
+ * interrupt disabling temporarily does not rely on IRQ priorities.
+ */
+#define GIC_PRIO_IRQON			0xe0
+#define __GIC_PRIO_IRQOFF		(GIC_PRIO_IRQON & ~0x80)
+#define __GIC_PRIO_IRQOFF_NS		0xa0
+#define GIC_PRIO_PSR_I_SET		(1 << 4)
+
+#define GIC_PRIO_IRQOFF							\
+	({								\
+		extern struct static_key_false gic_nonsecure_priorities;\
+		u8 __prio = __GIC_PRIO_IRQOFF;				\
+									\
+		if (static_branch_unlikely(&gic_nonsecure_priorities))	\
+			__prio = __GIC_PRIO_IRQOFF_NS;			\
+									\
+		__prio;							\
+	})
+
+/* Additional SPSR bits not exposed in the UABI */
+#define PSR_MODE_THREAD_BIT	(1 << 0)
+#define PSR_IL_BIT		(1 << 20)
+
+/* AArch32-specific ptrace requests */
+#define COMPAT_PTRACE_GETREGS		12
+#define COMPAT_PTRACE_SETREGS		13
+#define COMPAT_PTRACE_GET_THREAD_AREA	22
+#define COMPAT_PTRACE_SET_SYSCALL	23
+#define COMPAT_PTRACE_GETVFPREGS	27
+#define COMPAT_PTRACE_SETVFPREGS	28
+#define COMPAT_PTRACE_GETHBPREGS	29
+#define COMPAT_PTRACE_SETHBPREGS	30
+
+/* SPSR_ELx bits for exceptions taken from AArch32 */
+#define PSR_AA32_MODE_MASK	0x0000001f
+#define PSR_AA32_MODE_USR	0x00000010
+#define PSR_AA32_MODE_FIQ	0x00000011
+#define PSR_AA32_MODE_IRQ	0x00000012
+#define PSR_AA32_MODE_SVC	0x00000013
+#define PSR_AA32_MODE_ABT	0x00000017
+#define PSR_AA32_MODE_HYP	0x0000001a
+#define PSR_AA32_MODE_UND	0x0000001b
+#define PSR_AA32_MODE_SYS	0x0000001f
+#define PSR_AA32_T_BIT		0x00000020
+#define PSR_AA32_F_BIT		0x00000040
+#define PSR_AA32_I_BIT		0x00000080
+#define PSR_AA32_A_BIT		0x00000100
+#define PSR_AA32_E_BIT		0x00000200
+#define PSR_AA32_PAN_BIT	0x00400000
+#define PSR_AA32_SSBS_BIT	0x00800000
+#define PSR_AA32_DIT_BIT	0x01000000
+#define PSR_AA32_Q_BIT		0x08000000
+#define PSR_AA32_V_BIT		0x10000000
+#define PSR_AA32_C_BIT		0x20000000
+#define PSR_AA32_Z_BIT		0x40000000
+#define PSR_AA32_N_BIT		0x80000000
+#define PSR_AA32_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define PSR_AA32_GE_MASK	0x000f0000
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define PSR_AA32_ENDSTATE	PSR_AA32_E_BIT
+#else
+#define PSR_AA32_ENDSTATE	0
+#endif
+
+/* AArch32 CPSR bits, as seen in AArch32 */
+#define COMPAT_PSR_DIT_BIT	0x00200000
+
+/*
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define COMPAT_PT_TEXT_ADDR		0x10000
+#define COMPAT_PT_DATA_ADDR		0x10004
+#define COMPAT_PT_TEXT_END_ADDR		0x10008
+
+/*
+ * If pt_regs.syscallno == NO_SYSCALL, then the thread is not executing
+ * a syscall -- i.e., its most recent entry into the kernel from
+ * userspace was not via SVC, or otherwise a tracer cancelled the syscall.
+ *
+ * This must have the value -1, for ABI compatibility with ptrace etc.
+ */
+#define NO_SYSCALL (-1)
+
+#ifndef __ASSEMBLY__
+#include <linux/bug.h>
+#include <linux/types.h>
+
+/* sizeof(struct user) for AArch32 */
+#define COMPAT_USER_SZ	296
+
+/* Architecturally defined mapping between AArch32 and AArch64 registers */
+#define compat_usr(x)	regs[(x)]
+#define compat_fp	regs[11]
+#define compat_sp	regs[13]
+#define compat_lr	regs[14]
+#define compat_sp_hyp	regs[15]
+#define compat_lr_irq	regs[16]
+#define compat_sp_irq	regs[17]
+#define compat_lr_svc	regs[18]
+#define compat_sp_svc	regs[19]
+#define compat_lr_abt	regs[20]
+#define compat_sp_abt	regs[21]
+#define compat_lr_und	regs[22]
+#define compat_sp_und	regs[23]
+#define compat_r8_fiq	regs[24]
+#define compat_r9_fiq	regs[25]
+#define compat_r10_fiq	regs[26]
+#define compat_r11_fiq	regs[27]
+#define compat_r12_fiq	regs[28]
+#define compat_sp_fiq	regs[29]
+#define compat_lr_fiq	regs[30]
+
+static inline unsigned long compat_psr_to_pstate(const unsigned long psr)
+{
+	unsigned long pstate;
+
+	pstate = psr & ~COMPAT_PSR_DIT_BIT;
+
+	if (psr & COMPAT_PSR_DIT_BIT)
+		pstate |= PSR_AA32_DIT_BIT;
+
+	return pstate;
+}
+
+static inline unsigned long pstate_to_compat_psr(const unsigned long pstate)
+{
+	unsigned long psr;
+
+	psr = pstate & ~PSR_AA32_DIT_BIT;
+
+	if (pstate & PSR_AA32_DIT_BIT)
+		psr |= COMPAT_PSR_DIT_BIT;
+
+	return psr;
+}
+
+/*
+ * This struct defines the way the registers are stored on the stack during an
+ * exception. Note that sizeof(struct pt_regs) has to be a multiple of 16 (for
+ * stack alignment). struct user_pt_regs must form a prefix of struct pt_regs.
+ */
+struct pt_regs {
+	union {
+		struct user_pt_regs user_regs;
+		struct {
+			u64 regs[31];
+			u64 sp;
+			u64 pc;
+			u64 pstate;
+		};
+	};
+	u64 orig_x0;
+#ifdef __AARCH64EB__
+	u32 unused2;
+	s32 syscallno;
+#else
+	s32 syscallno;
+	u32 unused2;
+#endif
+	u64 sdei_ttbr1;
+	/* Only valid when ARM64_HAS_GIC_PRIO_MASKING is enabled. */
+	u64 pmr_save;
+	u64 stackframe[2];
+
+	/* Only valid for some EL1 exceptions. */
+	u64 lockdep_hardirqs;
+	u64 exit_rcu;
+};
+
+static inline bool in_syscall(struct pt_regs const *regs)
+{
+	return regs->syscallno != NO_SYSCALL;
+}
+
+static inline void forget_syscall(struct pt_regs *regs)
+{
+	regs->syscallno = NO_SYSCALL;
+}
+
+#define MAX_REG_OFFSET offsetof(struct pt_regs, pstate)
+
+#define arch_has_single_step()	(1)
+
+#ifdef CONFIG_COMPAT
+#define compat_thumb_mode(regs) \
+	(((regs)->pstate & PSR_AA32_T_BIT))
+#else
+#define compat_thumb_mode(regs) (0)
+#endif
+
+#define user_mode(regs)	\
+	(((regs)->pstate & PSR_MODE_MASK) == PSR_MODE_EL0t)
+
+#define compat_user_mode(regs)	\
+	(((regs)->pstate & (PSR_MODE32_BIT | PSR_MODE_MASK)) == \
+	 (PSR_MODE32_BIT | PSR_MODE_EL0t))
+
+#define processor_mode(regs) \
+	((regs)->pstate & PSR_MODE_MASK)
+
+#define irqs_priority_unmasked(regs)					\
+	(system_uses_irq_prio_masking() ?				\
+		(regs)->pmr_save == GIC_PRIO_IRQON :			\
+		true)
+
+#define interrupts_enabled(regs)			\
+	(!((regs)->pstate & PSR_I_BIT) && irqs_priority_unmasked(regs))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->pstate & PSR_F_BIT))
+
+static inline unsigned long user_stack_pointer(struct pt_regs *regs)
+{
+	if (compat_user_mode(regs))
+		return regs->compat_sp;
+	return regs->sp;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten
+ * @offset:	offset of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline u64 regs_get_register(struct pt_regs *regs, unsigned int offset)
+{
+	u64 val = 0;
+
+	WARN_ON(offset & 7);
+
+	offset >>= 3;
+	switch (offset) {
+	case 0 ... 30:
+		val = regs->regs[offset];
+		break;
+	case offsetof(struct pt_regs, sp) >> 3:
+		val = regs->sp;
+		break;
+	case offsetof(struct pt_regs, pc) >> 3:
+		val = regs->pc;
+		break;
+	case offsetof(struct pt_regs, pstate) >> 3:
+		val = regs->pstate;
+		break;
+	default:
+		val = 0;
+	}
+
+	return val;
+}
+
+/*
+ * Read a register given an architectural register index r.
+ * This handles the common case where 31 means XZR, not SP.
+ */
+static inline unsigned long pt_regs_read_reg(const struct pt_regs *regs, int r)
+{
+	return (r == 31) ? 0 : regs->regs[r];
+}
+
+/*
+ * Write a register given an architectural register index r.
+ * This handles the common case where 31 means XZR, not SP.
+ */
+static inline void pt_regs_write_reg(struct pt_regs *regs, int r,
+				     unsigned long val)
+{
+	if (r != 31)
+		regs->regs[r] = val;
+}
+
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+	unsigned long val = regs->regs[0];
+
+	/*
+	 * Audit currently uses regs_return_value() instead of
+	 * syscall_get_return_value(). Apply the same sign-extension here until
+	 * audit is updated to use syscall_get_return_value().
+	 */
+	if (compat_user_mode(regs))
+		val = sign_extend64(val, 31);
+
+	return val;
+}
+
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+	regs->regs[0] = rc;
+}
+
+/**
+ * regs_get_kernel_argument() - get Nth function argument in kernel
+ * @regs:	pt_regs of that context
+ * @n:		function argument number (start from 0)
+ *
+ * regs_get_argument() returns @n th argument of the function call.
+ *
+ * Note that this chooses the most likely register mapping. In very rare
+ * cases this may not return correct data, for example, if one of the
+ * function parameters is 16 bytes or bigger. In such cases, we cannot
+ * get access the parameter correctly and the register assignment of
+ * subsequent parameters will be shifted.
+ */
+static inline unsigned long regs_get_kernel_argument(struct pt_regs *regs,
+						     unsigned int n)
+{
+#define NR_REG_ARGUMENTS 8
+	if (n < NR_REG_ARGUMENTS)
+		return pt_regs_read_reg(regs, n);
+	return 0;
+}
+
+/* We must avoid circular header include via sched.h */
+struct task_struct;
+int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task);
+
+static inline unsigned long instruction_pointer(struct pt_regs *regs)
+{
+	return regs->pc;
+}
+static inline void instruction_pointer_set(struct pt_regs *regs,
+		unsigned long val)
+{
+	regs->pc = val;
+}
+
+static inline unsigned long frame_pointer(struct pt_regs *regs)
+{
+	return regs->regs[29];
+}
+
+#define procedure_link_pointer(regs)	((regs)->regs[30])
+
+static inline void procedure_link_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	procedure_link_pointer(regs) = val;
+}
+
+extern unsigned long profile_pc(struct pt_regs *regs);
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm64/include/asm/pvclock-abi.h b/arch/arm64/include/asm/pvclock-abi.h
new file mode 100644
index 000000000..c4f1c0a07
--- /dev/null
+++ b/arch/arm64/include/asm/pvclock-abi.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2019 Arm Ltd. */
+
+#ifndef __ASM_PVCLOCK_ABI_H
+#define __ASM_PVCLOCK_ABI_H
+
+/* The below structure is defined in ARM DEN0057A */
+
+struct pvclock_vcpu_stolen_time {
+	__le32 revision;
+	__le32 attributes;
+	__le64 stolen_time;
+	/* Structure must be 64 byte aligned, pad to that size */
+	u8 padding[48];
+} __packed;
+
+#endif
diff --git a/arch/arm64/include/asm/rwonce.h b/arch/arm64/include/asm/rwonce.h
new file mode 100644
index 000000000..56f7b1d4d
--- /dev/null
+++ b/arch/arm64/include/asm/rwonce.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Google LLC.
+ */
+#ifndef __ASM_RWONCE_H
+#define __ASM_RWONCE_H
+
+#if defined(CONFIG_LTO) && !defined(__ASSEMBLY__)
+
+#include <linux/compiler_types.h>
+#include <asm/alternative-macros.h>
+
+#ifndef BUILD_VDSO
+
+#ifdef CONFIG_AS_HAS_LDAPR
+#define __LOAD_RCPC(sfx, regs...)					\
+	ALTERNATIVE(							\
+		"ldar"	#sfx "\t" #regs,				\
+		".arch_extension rcpc\n"				\
+		"ldapr"	#sfx "\t" #regs,				\
+	ARM64_HAS_LDAPR)
+#else
+#define __LOAD_RCPC(sfx, regs...)	"ldar" #sfx "\t" #regs
+#endif /* CONFIG_AS_HAS_LDAPR */
+
+/*
+ * When building with LTO, there is an increased risk of the compiler
+ * converting an address dependency headed by a READ_ONCE() invocation
+ * into a control dependency and consequently allowing for harmful
+ * reordering by the CPU.
+ *
+ * Ensure that such transformations are harmless by overriding the generic
+ * READ_ONCE() definition with one that provides RCpc acquire semantics
+ * when building with LTO.
+ */
+#define __READ_ONCE(x)							\
+({									\
+	typeof(&(x)) __x = &(x);					\
+	int atomic = 1;							\
+	union { __unqual_scalar_typeof(*__x) __val; char __c[1]; } __u;	\
+	switch (sizeof(x)) {						\
+	case 1:								\
+		asm volatile(__LOAD_RCPC(b, %w0, %1)			\
+			: "=r" (*(__u8 *)__u.__c)			\
+			: "Q" (*__x) : "memory");			\
+		break;							\
+	case 2:								\
+		asm volatile(__LOAD_RCPC(h, %w0, %1)			\
+			: "=r" (*(__u16 *)__u.__c)			\
+			: "Q" (*__x) : "memory");			\
+		break;							\
+	case 4:								\
+		asm volatile(__LOAD_RCPC(, %w0, %1)			\
+			: "=r" (*(__u32 *)__u.__c)			\
+			: "Q" (*__x) : "memory");			\
+		break;							\
+	case 8:								\
+		asm volatile(__LOAD_RCPC(, %0, %1)			\
+			: "=r" (*(__u64 *)__u.__c)			\
+			: "Q" (*__x) : "memory");			\
+		break;							\
+	default:							\
+		atomic = 0;						\
+	}								\
+	atomic ? (typeof(*__x))__u.__val : (*(volatile typeof(__x))__x);\
+})
+
+#endif	/* !BUILD_VDSO */
+#endif	/* CONFIG_LTO && !__ASSEMBLY__ */
+
+#include <asm-generic/rwonce.h>
+
+#endif	/* __ASM_RWONCE_H */
diff --git a/arch/arm64/include/asm/scs.h b/arch/arm64/include/asm/scs.h
new file mode 100644
index 000000000..3fdae5fe3
--- /dev/null
+++ b/arch/arm64/include/asm/scs.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_SCS_H
+#define _ASM_SCS_H
+
+#ifdef __ASSEMBLY__
+
+#include <asm/asm-offsets.h>
+#include <asm/sysreg.h>
+
+#ifdef CONFIG_SHADOW_CALL_STACK
+	scs_sp	.req	x18
+
+	.macro scs_load_current
+	get_current_task scs_sp
+	ldr	scs_sp, [scs_sp, #TSK_TI_SCS_SP]
+	.endm
+
+	.macro scs_save tsk
+	str	scs_sp, [\tsk, #TSK_TI_SCS_SP]
+	.endm
+#else
+	.macro scs_load_current
+	.endm
+
+	.macro scs_save tsk
+	.endm
+#endif /* CONFIG_SHADOW_CALL_STACK */
+
+
+#else
+
+#include <linux/scs.h>
+#include <asm/cpufeature.h>
+
+#ifdef CONFIG_UNWIND_PATCH_PAC_INTO_SCS
+static inline bool should_patch_pac_into_scs(void)
+{
+	u64 reg;
+
+	/*
+	 * We only enable the shadow call stack dynamically if we are running
+	 * on a system that does not implement PAC or BTI. PAC and SCS provide
+	 * roughly the same level of protection, and BTI relies on the PACIASP
+	 * instructions serving as landing pads, preventing us from patching
+	 * those instructions into something else.
+	 */
+	reg = read_sysreg_s(SYS_ID_AA64ISAR1_EL1);
+	if (SYS_FIELD_GET(ID_AA64ISAR1_EL1, APA, reg) |
+	    SYS_FIELD_GET(ID_AA64ISAR1_EL1, API, reg))
+		return false;
+
+	reg = read_sysreg_s(SYS_ID_AA64ISAR2_EL1);
+	if (SYS_FIELD_GET(ID_AA64ISAR2_EL1, APA3, reg))
+		return false;
+
+	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) {
+		reg = read_sysreg_s(SYS_ID_AA64PFR1_EL1);
+		if (reg & (0xf << ID_AA64PFR1_EL1_BT_SHIFT))
+			return false;
+	}
+	return true;
+}
+
+static inline void dynamic_scs_init(void)
+{
+	if (should_patch_pac_into_scs()) {
+		pr_info("Enabling dynamic shadow call stack\n");
+		static_branch_enable(&dynamic_scs_enabled);
+	}
+}
+#else
+static inline void dynamic_scs_init(void) {}
+#endif
+
+int scs_patch(const u8 eh_frame[], int size);
+asmlinkage void scs_patch_vmlinux(void);
+
+#endif /* __ASSEMBLY __ */
+
+#endif /* _ASM_SCS_H */
diff --git a/arch/arm64/include/asm/sdei.h b/arch/arm64/include/asm/sdei.h
new file mode 100644
index 000000000..484cb6972
--- /dev/null
+++ b/arch/arm64/include/asm/sdei.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (C) 2017 Arm Ltd.
+#ifndef __ASM_SDEI_H
+#define __ASM_SDEI_H
+
+/* Values for sdei_exit_mode */
+#define SDEI_EXIT_HVC  0
+#define SDEI_EXIT_SMC  1
+
+#define SDEI_STACK_SIZE		IRQ_STACK_SIZE
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+#include <asm/virt.h>
+
+DECLARE_PER_CPU(struct sdei_registered_event *, sdei_active_normal_event);
+DECLARE_PER_CPU(struct sdei_registered_event *, sdei_active_critical_event);
+
+extern unsigned long sdei_exit_mode;
+
+/* Software Delegated Exception entry point from firmware*/
+asmlinkage void __sdei_asm_handler(unsigned long event_num, unsigned long arg,
+				   unsigned long pc, unsigned long pstate);
+
+/* and its CONFIG_UNMAP_KERNEL_AT_EL0 trampoline */
+asmlinkage void __sdei_asm_entry_trampoline(unsigned long event_num,
+						   unsigned long arg,
+						   unsigned long pc,
+						   unsigned long pstate);
+
+/* Abort a running handler. Context is discarded. */
+void __sdei_handler_abort(void);
+
+/*
+ * The above entry point does the minimum to call C code. This function does
+ * anything else, before calling the driver.
+ */
+struct sdei_registered_event;
+asmlinkage unsigned long __sdei_handler(struct pt_regs *regs,
+					struct sdei_registered_event *arg);
+
+unsigned long do_sdei_event(struct pt_regs *regs,
+			    struct sdei_registered_event *arg);
+
+unsigned long sdei_arch_get_entry_point(int conduit);
+#define sdei_arch_get_entry_point(x)	sdei_arch_get_entry_point(x)
+
+#endif /* __ASSEMBLY__ */
+#endif	/* __ASM_SDEI_H */
diff --git a/arch/arm64/include/asm/seccomp.h b/arch/arm64/include/asm/seccomp.h
new file mode 100644
index 000000000..302562337
--- /dev/null
+++ b/arch/arm64/include/asm/seccomp.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/seccomp.h
+ *
+ * Copyright (C) 2014 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
+
+#include <asm/unistd.h>
+
+#ifdef CONFIG_COMPAT
+#define __NR_seccomp_read_32		__NR_compat_read
+#define __NR_seccomp_write_32		__NR_compat_write
+#define __NR_seccomp_exit_32		__NR_compat_exit
+#define __NR_seccomp_sigreturn_32	__NR_compat_rt_sigreturn
+#endif /* CONFIG_COMPAT */
+
+#include <asm-generic/seccomp.h>
+
+#define SECCOMP_ARCH_NATIVE		AUDIT_ARCH_AARCH64
+#define SECCOMP_ARCH_NATIVE_NR		NR_syscalls
+#define SECCOMP_ARCH_NATIVE_NAME	"aarch64"
+#ifdef CONFIG_COMPAT
+# define SECCOMP_ARCH_COMPAT		AUDIT_ARCH_ARM
+# define SECCOMP_ARCH_COMPAT_NR	__NR_compat_syscalls
+# define SECCOMP_ARCH_COMPAT_NAME	"arm"
+#endif
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h
new file mode 100644
index 000000000..40971ac13
--- /dev/null
+++ b/arch/arm64/include/asm/sections.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 ARM Limited
+ */
+#ifndef __ASM_SECTIONS_H
+#define __ASM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char __alt_instructions[], __alt_instructions_end[];
+extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[];
+extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
+extern char __hyp_text_start[], __hyp_text_end[];
+extern char __hyp_rodata_start[], __hyp_rodata_end[];
+extern char __hyp_reloc_begin[], __hyp_reloc_end[];
+extern char __hyp_bss_start[], __hyp_bss_end[];
+extern char __idmap_text_start[], __idmap_text_end[];
+extern char __initdata_begin[], __initdata_end[];
+extern char __inittext_begin[], __inittext_end[];
+extern char __exittext_begin[], __exittext_end[];
+extern char __irqentry_text_start[], __irqentry_text_end[];
+extern char __mmuoff_data_start[], __mmuoff_data_end[];
+extern char __entry_tramp_text_start[], __entry_tramp_text_end[];
+extern char __relocate_new_kernel_start[], __relocate_new_kernel_end[];
+
+static inline size_t entry_tramp_text_size(void)
+{
+	return __entry_tramp_text_end - __entry_tramp_text_start;
+}
+
+#endif /* __ASM_SECTIONS_H */
diff --git a/arch/arm64/include/asm/semihost.h b/arch/arm64/include/asm/semihost.h
new file mode 100644
index 000000000..87e353dab
--- /dev/null
+++ b/arch/arm64/include/asm/semihost.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Adapted for ARM and earlycon:
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ */
+
+#ifndef _ARM64_SEMIHOST_H_
+#define _ARM64_SEMIHOST_H_
+
+struct uart_port;
+
+static inline void smh_putc(struct uart_port *port, unsigned char c)
+{
+	asm volatile("mov  x1, %0\n"
+		     "mov  x0, #3\n"
+		     "hlt  0xf000\n"
+		     : : "r" (&c) : "x0", "x1", "memory");
+}
+
+#endif /* _ARM64_SEMIHOST_H_ */
diff --git a/arch/arm64/include/asm/set_memory.h b/arch/arm64/include/asm/set_memory.h
new file mode 100644
index 000000000..0f740b781
--- /dev/null
+++ b/arch/arm64/include/asm/set_memory.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARM64_SET_MEMORY_H
+#define _ASM_ARM64_SET_MEMORY_H
+
+#include <asm-generic/set_memory.h>
+
+bool can_set_direct_map(void);
+#define can_set_direct_map can_set_direct_map
+
+int set_memory_valid(unsigned long addr, int numpages, int enable);
+
+int set_direct_map_invalid_noflush(struct page *page);
+int set_direct_map_default_noflush(struct page *page);
+bool kernel_page_present(struct page *page);
+
+#endif /* _ASM_ARM64_SET_MEMORY_H */
diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h
new file mode 100644
index 000000000..2e4d7da74
--- /dev/null
+++ b/arch/arm64/include/asm/setup.h
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef __ARM64_ASM_SETUP_H
+#define __ARM64_ASM_SETUP_H
+
+#include <linux/string.h>
+
+#include <uapi/asm/setup.h>
+
+void *get_early_fdt_ptr(void);
+void early_fdt_map(u64 dt_phys);
+
+/*
+ * These two variables are used in the head.S file.
+ */
+extern phys_addr_t __fdt_pointer __initdata;
+extern u64 __cacheline_aligned boot_args[4];
+
+static inline bool arch_parse_debug_rodata(char *arg)
+{
+	extern bool rodata_enabled;
+	extern bool rodata_full;
+
+	if (!arg)
+		return false;
+
+	if (!strcmp(arg, "full")) {
+		rodata_enabled = rodata_full = true;
+		return true;
+	}
+
+	if (!strcmp(arg, "off")) {
+		rodata_enabled = rodata_full = false;
+		return true;
+	}
+
+	if (!strcmp(arg, "on")) {
+		rodata_enabled = true;
+		rodata_full = false;
+		return true;
+	}
+
+	return false;
+}
+#define arch_parse_debug_rodata arch_parse_debug_rodata
+
+#endif
diff --git a/arch/arm64/include/asm/shmparam.h b/arch/arm64/include/asm/shmparam.h
new file mode 100644
index 000000000..f920e22ec
--- /dev/null
+++ b/arch/arm64/include/asm/shmparam.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SHMPARAM_H
+#define __ASM_SHMPARAM_H
+
+/*
+ * For IPC syscalls from compat tasks, we need to use the legacy 16k
+ * alignment value. Since we don't have aliasing D-caches, the rest of
+ * the time we can safely use PAGE_SIZE.
+ */
+#define COMPAT_SHMLBA	(4 * PAGE_SIZE)
+
+#include <asm-generic/shmparam.h>
+
+#endif /* __ASM_SHMPARAM_H */
diff --git a/arch/arm64/include/asm/signal.h b/arch/arm64/include/asm/signal.h
new file mode 100644
index 000000000..ef449f5f4
--- /dev/null
+++ b/arch/arm64/include/asm/signal.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ARM64_ASM_SIGNAL_H
+#define __ARM64_ASM_SIGNAL_H
+
+#include <asm/memory.h>
+#include <uapi/asm/signal.h>
+#include <uapi/asm/siginfo.h>
+
+static inline void __user *arch_untagged_si_addr(void __user *addr,
+						 unsigned long sig,
+						 unsigned long si_code)
+{
+	/*
+	 * For historical reasons, all bits of the fault address are exposed as
+	 * address bits for watchpoint exceptions. New architectures should
+	 * handle the tag bits consistently.
+	 */
+	if (sig == SIGTRAP && si_code == TRAP_BRKPT)
+		return addr;
+
+	return untagged_addr(addr);
+}
+#define arch_untagged_si_addr arch_untagged_si_addr
+
+#endif
diff --git a/arch/arm64/include/asm/signal32.h b/arch/arm64/include/asm/signal32.h
new file mode 100644
index 000000000..7e9f163d0
--- /dev/null
+++ b/arch/arm64/include/asm/signal32.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SIGNAL32_H
+#define __ASM_SIGNAL32_H
+
+#ifdef CONFIG_COMPAT
+#include <linux/compat.h>
+
+struct compat_sigcontext {
+	/* We always set these two fields to 0 */
+	compat_ulong_t			trap_no;
+	compat_ulong_t			error_code;
+
+	compat_ulong_t			oldmask;
+	compat_ulong_t			arm_r0;
+	compat_ulong_t			arm_r1;
+	compat_ulong_t			arm_r2;
+	compat_ulong_t			arm_r3;
+	compat_ulong_t			arm_r4;
+	compat_ulong_t			arm_r5;
+	compat_ulong_t			arm_r6;
+	compat_ulong_t			arm_r7;
+	compat_ulong_t			arm_r8;
+	compat_ulong_t			arm_r9;
+	compat_ulong_t			arm_r10;
+	compat_ulong_t			arm_fp;
+	compat_ulong_t			arm_ip;
+	compat_ulong_t			arm_sp;
+	compat_ulong_t			arm_lr;
+	compat_ulong_t			arm_pc;
+	compat_ulong_t			arm_cpsr;
+	compat_ulong_t			fault_address;
+};
+
+struct compat_ucontext {
+	compat_ulong_t			uc_flags;
+	compat_uptr_t			uc_link;
+	compat_stack_t			uc_stack;
+	struct compat_sigcontext	uc_mcontext;
+	compat_sigset_t			uc_sigmask;
+	int 				__unused[32 - (sizeof(compat_sigset_t) / sizeof(int))];
+	compat_ulong_t			uc_regspace[128] __attribute__((__aligned__(8)));
+};
+
+struct compat_sigframe {
+	struct compat_ucontext	uc;
+	compat_ulong_t		retcode[2];
+};
+
+struct compat_rt_sigframe {
+	struct compat_siginfo info;
+	struct compat_sigframe sig;
+};
+
+int compat_setup_frame(int usig, struct ksignal *ksig, sigset_t *set,
+		       struct pt_regs *regs);
+int compat_setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
+			  struct pt_regs *regs);
+
+void compat_setup_restart_syscall(struct pt_regs *regs);
+#else
+
+static inline int compat_setup_frame(int usid, struct ksignal *ksig,
+				     sigset_t *set, struct pt_regs *regs)
+{
+	return -ENOSYS;
+}
+
+static inline int compat_setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
+					struct pt_regs *regs)
+{
+	return -ENOSYS;
+}
+
+static inline void compat_setup_restart_syscall(struct pt_regs *regs)
+{
+}
+#endif /* CONFIG_COMPAT */
+#endif /* __ASM_SIGNAL32_H */
diff --git a/arch/arm64/include/asm/simd.h b/arch/arm64/include/asm/simd.h
new file mode 100644
index 000000000..6a75d7ecd
--- /dev/null
+++ b/arch/arm64/include/asm/simd.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#ifndef __ASM_SIMD_H
+#define __ASM_SIMD_H
+
+#include <linux/compiler.h>
+#include <linux/irqflags.h>
+#include <linux/percpu.h>
+#include <linux/preempt.h>
+#include <linux/types.h>
+
+DECLARE_PER_CPU(bool, fpsimd_context_busy);
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+/*
+ * may_use_simd - whether it is allowable at this time to issue SIMD
+ *                instructions or access the SIMD register file
+ *
+ * Callers must not assume that the result remains true beyond the next
+ * preempt_enable() or return from softirq context.
+ */
+static __must_check inline bool may_use_simd(void)
+{
+	/*
+	 * We must make sure that the SVE has been initialized properly
+	 * before using the SIMD in kernel.
+	 * fpsimd_context_busy is only set while preemption is disabled,
+	 * and is clear whenever preemption is enabled. Since
+	 * this_cpu_read() is atomic w.r.t. preemption, fpsimd_context_busy
+	 * cannot change under our feet -- if it's set we cannot be
+	 * migrated, and if it's clear we cannot be migrated to a CPU
+	 * where it is set.
+	 */
+	return !WARN_ON(!system_capabilities_finalized()) &&
+	       system_supports_fpsimd() &&
+	       !in_hardirq() && !irqs_disabled() && !in_nmi() &&
+	       !this_cpu_read(fpsimd_context_busy);
+}
+
+#else /* ! CONFIG_KERNEL_MODE_NEON */
+
+static __must_check inline bool may_use_simd(void) {
+	return false;
+}
+
+#endif /* ! CONFIG_KERNEL_MODE_NEON */
+
+#endif
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
new file mode 100644
index 000000000..9b31e6d0d
--- /dev/null
+++ b/arch/arm64/include/asm/smp.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/const.h>
+
+/* Values for secondary_data.status */
+#define CPU_STUCK_REASON_SHIFT		(8)
+#define CPU_BOOT_STATUS_MASK		((UL(1) << CPU_STUCK_REASON_SHIFT) - 1)
+
+#define CPU_MMU_OFF			(-1)
+#define CPU_BOOT_SUCCESS		(0)
+/* The cpu invoked ops->cpu_die, synchronise it with cpu_kill */
+#define CPU_KILL_ME			(1)
+/* The cpu couldn't die gracefully and is looping in the kernel */
+#define CPU_STUCK_IN_KERNEL		(2)
+/* Fatal system error detected by secondary CPU, crash the system */
+#define CPU_PANIC_KERNEL		(3)
+
+#define CPU_STUCK_REASON_52_BIT_VA	(UL(1) << CPU_STUCK_REASON_SHIFT)
+#define CPU_STUCK_REASON_NO_GRAN	(UL(2) << CPU_STUCK_REASON_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/percpu.h>
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/thread_info.h>
+
+DECLARE_PER_CPU_READ_MOSTLY(int, cpu_number);
+
+/*
+ * We don't use this_cpu_read(cpu_number) as that has implicit writes to
+ * preempt_count, and associated (compiler) barriers, that we'd like to avoid
+ * the expense of. If we're preemptible, the value can be stale at use anyway.
+ * And we can't use this_cpu_ptr() either, as that winds up recursing back
+ * here under CONFIG_DEBUG_PREEMPT=y.
+ */
+#define raw_smp_processor_id() (*raw_cpu_ptr(&cpu_number))
+
+/*
+ * Logical CPU mapping.
+ */
+extern u64 __cpu_logical_map[NR_CPUS];
+extern u64 cpu_logical_map(unsigned int cpu);
+
+static inline void set_cpu_logical_map(unsigned int cpu, u64 hwid)
+{
+	__cpu_logical_map[cpu] = hwid;
+}
+
+struct seq_file;
+
+/*
+ * Discover the set of possible CPUs and determine their
+ * SMP operations.
+ */
+extern void smp_init_cpus(void);
+
+/*
+ * Register IPI interrupts with the arch SMP code
+ */
+extern void set_smp_ipi_range(int ipi_base, int nr_ipi);
+
+/*
+ * Called from the secondary holding pen, this is the secondary CPU entry point.
+ */
+asmlinkage void secondary_start_kernel(void);
+
+/*
+ * Initial data for bringing up a secondary CPU.
+ * @status - Result passed back from the secondary CPU to
+ *           indicate failure.
+ */
+struct secondary_data {
+	struct task_struct *task;
+	long status;
+};
+
+extern struct secondary_data secondary_data;
+extern long __early_cpu_boot_status;
+extern void secondary_entry(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
+#else
+static inline void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
+{
+	BUILD_BUG();
+}
+#endif
+
+extern int __cpu_disable(void);
+
+static inline void __cpu_die(unsigned int cpu) { }
+extern void __noreturn cpu_die(void);
+extern void __noreturn cpu_die_early(void);
+
+static inline void __noreturn cpu_park_loop(void)
+{
+	for (;;) {
+		wfe();
+		wfi();
+	}
+}
+
+static inline void update_cpu_boot_status(int val)
+{
+	WRITE_ONCE(secondary_data.status, val);
+	/* Ensure the visibility of the status update */
+	dsb(ishst);
+}
+
+/*
+ * The calling secondary CPU has detected serious configuration mismatch,
+ * which calls for a kernel panic. Update the boot status and park the calling
+ * CPU.
+ */
+static inline void __noreturn cpu_panic_kernel(void)
+{
+	update_cpu_boot_status(CPU_PANIC_KERNEL);
+	cpu_park_loop();
+}
+
+/*
+ * If a secondary CPU enters the kernel but fails to come online,
+ * (e.g. due to mismatched features), and cannot exit the kernel,
+ * we increment cpus_stuck_in_kernel and leave the CPU in a
+ * quiesecent loop within the kernel text. The memory containing
+ * this loop must not be re-used for anything else as the 'stuck'
+ * core is executing it.
+ *
+ * This function is used to inhibit features like kexec and hibernate.
+ */
+bool cpus_are_stuck_in_kernel(void);
+
+extern void crash_smp_send_stop(void);
+extern bool smp_crash_stop_failed(void);
+
+#endif /* ifndef __ASSEMBLY__ */
+
+#endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/smp_plat.h b/arch/arm64/include/asm/smp_plat.h
new file mode 100644
index 000000000..97ddc6c20
--- /dev/null
+++ b/arch/arm64/include/asm/smp_plat.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Definitions specific to SMP platforms.
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ */
+
+#ifndef __ASM_SMP_PLAT_H
+#define __ASM_SMP_PLAT_H
+
+#include <linux/cpumask.h>
+
+#include <asm/smp.h>
+#include <asm/types.h>
+
+struct mpidr_hash {
+	u64	mask;
+	u32	shift_aff[4];
+	u32	bits;
+};
+
+extern struct mpidr_hash mpidr_hash;
+
+static inline u32 mpidr_hash_size(void)
+{
+	return 1 << mpidr_hash.bits;
+}
+
+/*
+ * Retrieve logical cpu index corresponding to a given MPIDR.Aff*
+ *  - mpidr: MPIDR.Aff* bits to be used for the look-up
+ *
+ * Returns the cpu logical index or -EINVAL on look-up error
+ */
+static inline int get_logical_index(u64 mpidr)
+{
+	int cpu;
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
+		if (cpu_logical_map(cpu) == mpidr)
+			return cpu;
+	return -EINVAL;
+}
+
+#endif /* __ASM_SMP_PLAT_H */
diff --git a/arch/arm64/include/asm/sparsemem.h b/arch/arm64/include/asm/sparsemem.h
new file mode 100644
index 000000000..5f5437621
--- /dev/null
+++ b/arch/arm64/include/asm/sparsemem.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SPARSEMEM_H
+#define __ASM_SPARSEMEM_H
+
+#define MAX_PHYSMEM_BITS	CONFIG_ARM64_PA_BITS
+
+/*
+ * Section size must be at least 512MB for 64K base
+ * page size config. Otherwise it will be less than
+ * MAX_ORDER and the build process will fail.
+ */
+#ifdef CONFIG_ARM64_64K_PAGES
+#define SECTION_SIZE_BITS 29
+
+#else
+
+/*
+ * Section size must be at least 128MB for 4K base
+ * page size config. Otherwise PMD based huge page
+ * entries could not be created for vmemmap mappings.
+ * 16K follows 4K for simplicity.
+ */
+#define SECTION_SIZE_BITS 27
+#endif /* CONFIG_ARM64_64K_PAGES */
+
+#endif
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
new file mode 100644
index 000000000..9cc501450
--- /dev/null
+++ b/arch/arm64/include/asm/spectre.h
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Interface for managing mitigations for Spectre vulnerabilities.
+ *
+ * Copyright (C) 2020 Google LLC
+ * Author: Will Deacon <will@kernel.org>
+ */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+#define BP_HARDEN_EL2_SLOTS 4
+#define __BP_HARDEN_HYP_VECS_SZ	((BP_HARDEN_EL2_SLOTS - 1) * SZ_2K)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+
+#include <asm/cpufeature.h>
+#include <asm/virt.h>
+
+/* Watch out, ordering is important here. */
+enum mitigation_state {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+struct pt_regs;
+struct task_struct;
+
+/*
+ * Note: the order of this enum corresponds to __bp_harden_hyp_vecs and
+ * we rely on having the direct vectors first.
+ */
+enum arm64_hyp_spectre_vector {
+	/*
+	 * Take exceptions directly to __kvm_hyp_vector. This must be
+	 * 0 so that it used by default when mitigations are not needed.
+	 */
+	HYP_VECTOR_DIRECT,
+
+	/*
+	 * Bounce via a slot in the hypervisor text mapping of
+	 * __bp_harden_hyp_vecs, which contains an SMC call.
+	 */
+	HYP_VECTOR_SPECTRE_DIRECT,
+
+	/*
+	 * Bounce via a slot in a special mapping of __bp_harden_hyp_vecs
+	 * next to the idmap page.
+	 */
+	HYP_VECTOR_INDIRECT,
+
+	/*
+	 * Bounce via a slot in a special mapping of __bp_harden_hyp_vecs
+	 * next to the idmap page, which contains an SMC call.
+	 */
+	HYP_VECTOR_SPECTRE_INDIRECT,
+};
+
+typedef void (*bp_hardening_cb_t)(void);
+
+struct bp_hardening_data {
+	enum arm64_hyp_spectre_vector	slot;
+	bp_hardening_cb_t		fn;
+};
+
+DECLARE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
+
+/* Called during entry so must be __always_inline */
+static __always_inline void arm64_apply_bp_hardening(void)
+{
+	struct bp_hardening_data *d;
+
+	if (!cpus_have_const_cap(ARM64_SPECTRE_V2))
+		return;
+
+	d = this_cpu_ptr(&bp_hardening_data);
+	if (d->fn)
+		d->fn();
+}
+
+enum mitigation_state arm64_get_spectre_v2_state(void);
+bool has_spectre_v2(const struct arm64_cpu_capabilities *cap, int scope);
+void spectre_v2_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
+
+bool has_spectre_v3a(const struct arm64_cpu_capabilities *cap, int scope);
+void spectre_v3a_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
+
+enum mitigation_state arm64_get_spectre_v4_state(void);
+bool has_spectre_v4(const struct arm64_cpu_capabilities *cap, int scope);
+void spectre_v4_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
+void spectre_v4_enable_task_mitigation(struct task_struct *tsk);
+
+enum mitigation_state arm64_get_meltdown_state(void);
+
+enum mitigation_state arm64_get_spectre_bhb_state(void);
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
+u8 spectre_bhb_loop_affected(int scope);
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
+bool try_emulate_el1_ssbs(struct pt_regs *regs, u32 instr);
+
+void spectre_v4_patch_fw_mitigation_enable(struct alt_instr *alt, __le32 *origptr,
+					   __le32 *updptr, int nr_inst);
+void smccc_patch_fw_mitigation_conduit(struct alt_instr *alt, __le32 *origptr,
+				       __le32 *updptr, int nr_inst);
+void spectre_bhb_patch_loop_mitigation_enable(struct alt_instr *alt, __le32 *origptr,
+					      __le32 *updptr, int nr_inst);
+void spectre_bhb_patch_fw_mitigation_enabled(struct alt_instr *alt, __le32 *origptr,
+					     __le32 *updptr, int nr_inst);
+void spectre_bhb_patch_loop_iter(struct alt_instr *alt,
+				 __le32 *origptr, __le32 *updptr, int nr_inst);
+void spectre_bhb_patch_wa3(struct alt_instr *alt,
+			   __le32 *origptr, __le32 *updptr, int nr_inst);
+void spectre_bhb_patch_clearbhb(struct alt_instr *alt,
+				__le32 *origptr, __le32 *updptr, int nr_inst);
+
+#endif	/* __ASSEMBLY__ */
+#endif	/* __ASM_SPECTRE_H */
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
new file mode 100644
index 000000000..0525c0b08
--- /dev/null
+++ b/arch/arm64/include/asm/spinlock.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <asm/qspinlock.h>
+#include <asm/qrwlock.h>
+
+/* See include/linux/spinlock.h */
+#define smp_mb__after_spinlock()	smp_mb()
+
+/*
+ * Changing this will break osq_lock() thanks to the call inside
+ * smp_cond_load_relaxed().
+ *
+ * See:
+ * https://lore.kernel.org/lkml/20200110100612.GC2827@hirez.programming.kicks-ass.net
+ */
+#define vcpu_is_preempted vcpu_is_preempted
+static inline bool vcpu_is_preempted(int cpu)
+{
+	return false;
+}
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arm64/include/asm/spinlock_types.h b/arch/arm64/include/asm/spinlock_types.h
new file mode 100644
index 000000000..11ab1c077
--- /dev/null
+++ b/arch/arm64/include/asm/spinlock_types.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#if !defined(__LINUX_SPINLOCK_TYPES_RAW_H) && !defined(__ASM_SPINLOCK_H)
+# error "please don't include this file directly"
+#endif
+
+#include <asm-generic/qspinlock_types.h>
+#include <asm-generic/qrwlock_types.h>
+
+#endif
diff --git a/arch/arm64/include/asm/stack_pointer.h b/arch/arm64/include/asm/stack_pointer.h
new file mode 100644
index 000000000..8e57c96ad
--- /dev/null
+++ b/arch/arm64/include/asm/stack_pointer.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_STACK_POINTER_H
+#define __ASM_STACK_POINTER_H
+
+/*
+ * how to get the current stack pointer from C
+ */
+register unsigned long current_stack_pointer asm ("sp");
+
+#endif /* __ASM_STACK_POINTER_H */
diff --git a/arch/arm64/include/asm/stackprotector.h b/arch/arm64/include/asm/stackprotector.h
new file mode 100644
index 000000000..ae3ad80f5
--- /dev/null
+++ b/arch/arm64/include/asm/stackprotector.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function.  The pattern is called stack canary
+ * and gcc expects it to be defined by a global variable called
+ * "__stack_chk_guard" on ARM.  This unfortunately means that on SMP
+ * we cannot have a different canary value per task.
+ */
+
+#ifndef __ASM_STACKPROTECTOR_H
+#define __ASM_STACKPROTECTOR_H
+
+#include <asm/pointer_auth.h>
+
+extern unsigned long __stack_chk_guard;
+
+/*
+ * Initialize the stackprotector canary value.
+ *
+ * NOTE: this must only be called from functions that never return,
+ * and it must always be inlined.
+ */
+static __always_inline void boot_init_stack_canary(void)
+{
+#if defined(CONFIG_STACKPROTECTOR)
+	unsigned long canary = get_random_canary();
+
+	current->stack_canary = canary;
+	if (!IS_ENABLED(CONFIG_STACKPROTECTOR_PER_TASK))
+		__stack_chk_guard = current->stack_canary;
+#endif
+	ptrauth_thread_init_kernel(current);
+	ptrauth_thread_switch_kernel(current);
+	ptrauth_enable();
+}
+
+#endif	/* _ASM_STACKPROTECTOR_H */
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
new file mode 100644
index 000000000..66ec8caa6
--- /dev/null
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_STACKTRACE_H
+#define __ASM_STACKTRACE_H
+
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+#include <linux/llist.h>
+
+#include <asm/memory.h>
+#include <asm/pointer_auth.h>
+#include <asm/ptrace.h>
+#include <asm/sdei.h>
+
+#include <asm/stacktrace/common.h>
+
+extern void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+			   const char *loglvl);
+
+DECLARE_PER_CPU(unsigned long *, irq_stack_ptr);
+
+static inline struct stack_info stackinfo_get_irq(void)
+{
+	unsigned long low = (unsigned long)raw_cpu_read(irq_stack_ptr);
+	unsigned long high = low + IRQ_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static inline bool on_irq_stack(unsigned long sp, unsigned long size)
+{
+	struct stack_info info = stackinfo_get_irq();
+	return stackinfo_on_stack(&info, sp, size);
+}
+
+static inline struct stack_info stackinfo_get_task(const struct task_struct *tsk)
+{
+	unsigned long low = (unsigned long)task_stack_page(tsk);
+	unsigned long high = low + THREAD_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static inline bool on_task_stack(const struct task_struct *tsk,
+				 unsigned long sp, unsigned long size)
+{
+	struct stack_info info = stackinfo_get_task(tsk);
+	return stackinfo_on_stack(&info, sp, size);
+}
+
+#define on_thread_stack()	(on_task_stack(current, current_stack_pointer, 1))
+
+#ifdef CONFIG_VMAP_STACK
+DECLARE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
+
+static inline struct stack_info stackinfo_get_overflow(void)
+{
+	unsigned long low = (unsigned long)raw_cpu_ptr(overflow_stack);
+	unsigned long high = low + OVERFLOW_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+#else
+#define stackinfo_get_overflow()	stackinfo_get_unknown()
+#endif
+
+#if defined(CONFIG_ARM_SDE_INTERFACE) && defined(CONFIG_VMAP_STACK)
+DECLARE_PER_CPU(unsigned long *, sdei_stack_normal_ptr);
+DECLARE_PER_CPU(unsigned long *, sdei_stack_critical_ptr);
+
+static inline struct stack_info stackinfo_get_sdei_normal(void)
+{
+	unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_normal_ptr);
+	unsigned long high = low + SDEI_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static inline struct stack_info stackinfo_get_sdei_critical(void)
+{
+	unsigned long low = (unsigned long)raw_cpu_read(sdei_stack_critical_ptr);
+	unsigned long high = low + SDEI_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+#else
+#define stackinfo_get_sdei_normal()	stackinfo_get_unknown()
+#define stackinfo_get_sdei_critical()	stackinfo_get_unknown()
+#endif
+
+#ifdef CONFIG_EFI
+extern u64 *efi_rt_stack_top;
+
+static inline struct stack_info stackinfo_get_efi(void)
+{
+	unsigned long high = (u64)efi_rt_stack_top;
+	unsigned long low = high - THREAD_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+#endif
+
+#endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm64/include/asm/stacktrace/common.h b/arch/arm64/include/asm/stacktrace/common.h
new file mode 100644
index 000000000..508f734de
--- /dev/null
+++ b/arch/arm64/include/asm/stacktrace/common.h
@@ -0,0 +1,176 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Common arm64 stack unwinder code.
+ *
+ * See: arch/arm64/kernel/stacktrace.c for the reference implementation.
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_STACKTRACE_COMMON_H
+#define __ASM_STACKTRACE_COMMON_H
+
+#include <linux/kprobes.h>
+#include <linux/types.h>
+
+struct stack_info {
+	unsigned long low;
+	unsigned long high;
+};
+
+/**
+ * struct unwind_state - state used for robust unwinding.
+ *
+ * @fp:          The fp value in the frame record (or the real fp)
+ * @pc:          The lr value in the frame record (or the real lr)
+ *
+ * @kr_cur:      When KRETPROBES is selected, holds the kretprobe instance
+ *               associated with the most recently encountered replacement lr
+ *               value.
+ *
+ * @task:        The task being unwound.
+ *
+ * @stack:       The stack currently being unwound.
+ * @stacks:      An array of stacks which can be unwound.
+ * @nr_stacks:   The number of stacks in @stacks.
+ */
+struct unwind_state {
+	unsigned long fp;
+	unsigned long pc;
+#ifdef CONFIG_KRETPROBES
+	struct llist_node *kr_cur;
+#endif
+	struct task_struct *task;
+
+	struct stack_info stack;
+	struct stack_info *stacks;
+	int nr_stacks;
+};
+
+static inline struct stack_info stackinfo_get_unknown(void)
+{
+	return (struct stack_info) {
+		.low = 0,
+		.high = 0,
+	};
+}
+
+static inline bool stackinfo_on_stack(const struct stack_info *info,
+				      unsigned long sp, unsigned long size)
+{
+	if (!info->low)
+		return false;
+
+	if (sp < info->low || sp + size < sp || sp + size > info->high)
+		return false;
+
+	return true;
+}
+
+static inline void unwind_init_common(struct unwind_state *state,
+				      struct task_struct *task)
+{
+	state->task = task;
+#ifdef CONFIG_KRETPROBES
+	state->kr_cur = NULL;
+#endif
+
+	state->stack = stackinfo_get_unknown();
+}
+
+static struct stack_info *unwind_find_next_stack(const struct unwind_state *state,
+						 unsigned long sp,
+						 unsigned long size)
+{
+	for (int i = 0; i < state->nr_stacks; i++) {
+		struct stack_info *info = &state->stacks[i];
+
+		if (stackinfo_on_stack(info, sp, size))
+			return info;
+	}
+
+	return NULL;
+}
+
+/**
+ * unwind_consume_stack() - Check if an object is on an accessible stack,
+ * updating stack boundaries so that future unwind steps cannot consume this
+ * object again.
+ *
+ * @state: the current unwind state.
+ * @sp:    the base address of the object.
+ * @size:  the size of the object.
+ *
+ * Return: 0 upon success, an error code otherwise.
+ */
+static inline int unwind_consume_stack(struct unwind_state *state,
+				       unsigned long sp,
+				       unsigned long size)
+{
+	struct stack_info *next;
+
+	if (stackinfo_on_stack(&state->stack, sp, size))
+		goto found;
+
+	next = unwind_find_next_stack(state, sp, size);
+	if (!next)
+		return -EINVAL;
+
+	/*
+	 * Stack transitions are strictly one-way, and once we've
+	 * transitioned from one stack to another, it's never valid to
+	 * unwind back to the old stack.
+	 *
+	 * Remove the current stack from the list of stacks so that it cannot
+	 * be found on a subsequent transition.
+	 *
+	 * Note that stacks can nest in several valid orders, e.g.
+	 *
+	 *   TASK -> IRQ -> OVERFLOW -> SDEI_NORMAL
+	 *   TASK -> SDEI_NORMAL -> SDEI_CRITICAL -> OVERFLOW
+	 *   HYP -> OVERFLOW
+	 *
+	 * ... so we do not check the specific order of stack
+	 * transitions.
+	 */
+	state->stack = *next;
+	*next = stackinfo_get_unknown();
+
+found:
+	/*
+	 * Future unwind steps can only consume stack above this frame record.
+	 * Update the current stack to start immediately above it.
+	 */
+	state->stack.low = sp + size;
+	return 0;
+}
+
+/**
+ * unwind_next_frame_record() - Unwind to the next frame record.
+ *
+ * @state:        the current unwind state.
+ *
+ * Return: 0 upon success, an error code otherwise.
+ */
+static inline int
+unwind_next_frame_record(struct unwind_state *state)
+{
+	unsigned long fp = state->fp;
+	int err;
+
+	if (fp & 0x7)
+		return -EINVAL;
+
+	err = unwind_consume_stack(state, fp, 16);
+	if (err)
+		return err;
+
+	/*
+	 * Record this frame record's values.
+	 */
+	state->fp = READ_ONCE(*(unsigned long *)(fp));
+	state->pc = READ_ONCE(*(unsigned long *)(fp + 8));
+
+	return 0;
+}
+
+#endif	/* __ASM_STACKTRACE_COMMON_H */
diff --git a/arch/arm64/include/asm/stacktrace/nvhe.h b/arch/arm64/include/asm/stacktrace/nvhe.h
new file mode 100644
index 000000000..25ab83a31
--- /dev/null
+++ b/arch/arm64/include/asm/stacktrace/nvhe.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * KVM nVHE hypervisor stack tracing support.
+ *
+ * The unwinder implementation depends on the nVHE mode:
+ *
+ *   1) Non-protected nVHE mode - the host can directly access the
+ *      HYP stack pages and unwind the HYP stack in EL1. This saves having
+ *      to allocate shared buffers for the host to read the unwinded
+ *      stacktrace.
+ *
+ *   2) pKVM (protected nVHE) mode - the host cannot directly access
+ *      the HYP memory. The stack is unwinded in EL2 and dumped to a shared
+ *      buffer where the host can read and print the stacktrace.
+ *
+ * Copyright (C) 2022 Google LLC
+ */
+#ifndef __ASM_STACKTRACE_NVHE_H
+#define __ASM_STACKTRACE_NVHE_H
+
+#include <asm/stacktrace/common.h>
+
+/**
+ * kvm_nvhe_unwind_init() - Start an unwind from the given nVHE HYP fp and pc
+ *
+ * @state : unwind_state to initialize
+ * @fp    : frame pointer at which to start the unwinding.
+ * @pc    : program counter at which to start the unwinding.
+ */
+static inline void kvm_nvhe_unwind_init(struct unwind_state *state,
+					unsigned long fp,
+					unsigned long pc)
+{
+	unwind_init_common(state, NULL);
+
+	state->fp = fp;
+	state->pc = pc;
+}
+
+#ifndef __KVM_NVHE_HYPERVISOR__
+/*
+ * Conventional (non-protected) nVHE HYP stack unwinder
+ *
+ * In non-protected mode, the unwinding is done from kernel proper context
+ * (by the host in EL1).
+ */
+
+DECLARE_KVM_NVHE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack);
+DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_stacktrace_info, kvm_stacktrace_info);
+DECLARE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
+
+void kvm_nvhe_dump_backtrace(unsigned long hyp_offset);
+
+#endif	/* __KVM_NVHE_HYPERVISOR__ */
+#endif	/* __ASM_STACKTRACE_NVHE_H */
diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h
new file mode 100644
index 000000000..c8dca8ae3
--- /dev/null
+++ b/arch/arm64/include/asm/stage2_pgtable.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ *
+ * stage2 page table helpers
+ */
+
+#ifndef __ARM64_S2_PGTABLE_H_
+#define __ARM64_S2_PGTABLE_H_
+
+#include <linux/pgtable.h>
+
+/*
+ * The hardware supports concatenation of up to 16 tables at stage2 entry
+ * level and we use the feature whenever possible, which means we resolve 4
+ * additional bits of address at the entry level.
+ *
+ * This implies, the total number of page table levels required for
+ * IPA_SHIFT at stage2 expected by the hardware can be calculated using
+ * the same logic used for the (non-collapsable) stage1 page tables but for
+ * (IPA_SHIFT - 4).
+ */
+#define stage2_pgtable_levels(ipa)	ARM64_HW_PGTABLE_LEVELS((ipa) - 4)
+#define kvm_stage2_levels(kvm)		VTCR_EL2_LVLS(kvm->arch.vtcr)
+
+/*
+ * kvm_mmmu_cache_min_pages() is the number of pages required to install
+ * a stage-2 translation. We pre-allocate the entry level page table at
+ * the VM creation.
+ */
+#define kvm_mmu_cache_min_pages(kvm)	(kvm_stage2_levels(kvm) - 1)
+
+#endif	/* __ARM64_S2_PGTABLE_H_ */
diff --git a/arch/arm64/include/asm/stat.h b/arch/arm64/include/asm/stat.h
new file mode 100644
index 000000000..3b4a62f5a
--- /dev/null
+++ b/arch/arm64/include/asm/stat.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_STAT_H
+#define __ASM_STAT_H
+
+#include <uapi/asm/stat.h>
+
+#ifdef CONFIG_COMPAT
+
+#include <linux/time.h>
+#include <asm/compat.h>
+
+/*
+ * struct stat64 is needed for compat tasks only. Its definition is different
+ * from the generic struct stat64.
+ */
+struct stat64 {
+	compat_u64	st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	compat_ulong_t	__st_ino;
+	compat_uint_t	st_mode;
+	compat_uint_t	st_nlink;
+
+	compat_ulong_t	st_uid;
+	compat_ulong_t	st_gid;
+
+	compat_u64	st_rdev;
+	unsigned char   __pad3[4];
+
+	compat_s64	st_size;
+	compat_ulong_t	st_blksize;
+	compat_u64	st_blocks;	/* Number of 512-byte blocks allocated. */
+
+	compat_ulong_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+
+	compat_ulong_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+
+	compat_ulong_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+
+	compat_u64	st_ino;
+};
+
+#endif
+#endif
diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h
new file mode 100644
index 000000000..3a3264ff4
--- /dev/null
+++ b/arch/arm64/include/asm/string.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ */
+#ifndef __ASM_STRING_H
+#define __ASM_STRING_H
+
+#if !(defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS))
+#define __HAVE_ARCH_STRRCHR
+extern char *strrchr(const char *, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char *strchr(const char *, int c);
+
+#define __HAVE_ARCH_STRCMP
+extern int strcmp(const char *, const char *);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *, const char *, __kernel_size_t);
+
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNLEN
+extern __kernel_size_t strnlen(const char *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *, int, __kernel_size_t);
+#endif
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, __kernel_size_t);
+extern void *__memset(void *, int, __kernel_size_t);
+
+#ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
+#define __HAVE_ARCH_MEMCPY_FLUSHCACHE
+void memcpy_flushcache(void *dst, const void *src, size_t cnt);
+#endif
+
+#if (defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)) && \
+	!defined(__SANITIZE_ADDRESS__)
+
+/*
+ * For files that are not instrumented (e.g. mm/slub.c) we
+ * should use not instrumented version of mem* functions.
+ */
+
+#define memcpy(dst, src, len) __memcpy(dst, src, len)
+#define memmove(dst, src, len) __memmove(dst, src, len)
+#define memset(s, c, n) __memset(s, c, n)
+
+#ifndef __NO_FORTIFY
+#define __NO_FORTIFY /* FORTIFY_SOURCE uses __builtin_memcpy, etc. */
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h
new file mode 100644
index 000000000..0cde2f473
--- /dev/null
+++ b/arch/arm64/include/asm/suspend.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SUSPEND_H
+#define __ASM_SUSPEND_H
+
+#define NR_CTX_REGS 13
+#define NR_CALLEE_SAVED_REGS 12
+
+/*
+ * struct cpu_suspend_ctx must be 16-byte aligned since it is allocated on
+ * the stack, which must be 16-byte aligned on v8
+ */
+struct cpu_suspend_ctx {
+	/*
+	 * This struct must be kept in sync with
+	 * cpu_do_{suspend/resume} in mm/proc.S
+	 */
+	u64 ctx_regs[NR_CTX_REGS];
+	u64 sp;
+} __aligned(16);
+
+/*
+ * Memory to save the cpu state is allocated on the stack by
+ * __cpu_suspend_enter()'s caller, and populated by __cpu_suspend_enter().
+ * This data must survive until cpu_resume() is called.
+ *
+ * This struct desribes the size and the layout of the saved cpu state.
+ * The layout of the callee_saved_regs is defined by the implementation
+ * of __cpu_suspend_enter(), and cpu_resume(). This struct must be passed
+ * in by the caller as __cpu_suspend_enter()'s stack-frame is gone once it
+ * returns, and the data would be subsequently corrupted by the call to the
+ * finisher.
+ */
+struct sleep_stack_data {
+	struct cpu_suspend_ctx	system_regs;
+	unsigned long		callee_saved_regs[NR_CALLEE_SAVED_REGS];
+};
+
+extern unsigned long *sleep_save_stash;
+
+extern int cpu_suspend(unsigned long arg, int (*fn)(unsigned long));
+extern void cpu_resume(void);
+int __cpu_suspend_enter(struct sleep_stack_data *state);
+void __cpu_suspend_exit(void);
+void _cpu_resume(void);
+
+int swsusp_arch_suspend(void);
+int swsusp_arch_resume(void);
+int arch_hibernation_header_save(void *addr, unsigned int max_size);
+int arch_hibernation_header_restore(void *addr);
+
+/* Used to resume on the CPU we hibernated on */
+int hibernate_resume_nonboot_cpu_disable(void);
+
+#endif
diff --git a/arch/arm64/include/asm/sync_bitops.h b/arch/arm64/include/asm/sync_bitops.h
new file mode 100644
index 000000000..e9c1a02c2
--- /dev/null
+++ b/arch/arm64/include/asm/sync_bitops.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SYNC_BITOPS_H__
+#define __ASM_SYNC_BITOPS_H__
+
+#include <asm/bitops.h>
+#include <asm/cmpxchg.h>
+
+/* sync_bitops functions are equivalent to the SMP implementation of the
+ * original functions, independently from CONFIG_SMP being defined.
+ *
+ * We need them because _set_bit etc are not SMP safe if !CONFIG_SMP. But
+ * under Xen you might be communicating with a completely external entity
+ * who might be on another CPU (e.g. two uniprocessor guests communicating
+ * via event channels and grant tables). So we need a variant of the bit
+ * ops which are SMP safe even on a UP kernel.
+ */
+
+#define sync_set_bit(nr, p)			set_bit(nr, p)
+#define sync_clear_bit(nr, p)			clear_bit(nr, p)
+#define sync_change_bit(nr, p)			change_bit(nr, p)
+#define sync_test_and_set_bit(nr, p)		test_and_set_bit(nr, p)
+#define sync_test_and_clear_bit(nr, p)		test_and_clear_bit(nr, p)
+#define sync_test_and_change_bit(nr, p)		test_and_change_bit(nr, p)
+#define sync_test_bit(nr, addr)			test_bit(nr, addr)
+#define arch_sync_cmpxchg			arch_cmpxchg
+
+#endif
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
new file mode 100644
index 000000000..ab8e14b96
--- /dev/null
+++ b/arch/arm64/include/asm/syscall.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SYSCALL_H
+#define __ASM_SYSCALL_H
+
+#include <uapi/linux/audit.h>
+#include <linux/compat.h>
+#include <linux/err.h>
+
+typedef long (*syscall_fn_t)(const struct pt_regs *regs);
+
+extern const syscall_fn_t sys_call_table[];
+
+#ifdef CONFIG_COMPAT
+extern const syscall_fn_t compat_sys_call_table[];
+#endif
+
+static inline int syscall_get_nr(struct task_struct *task,
+				 struct pt_regs *regs)
+{
+	return regs->syscallno;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->regs[0] = regs->orig_x0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	unsigned long val = regs->regs[0];
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = sign_extend64(val, 31);
+
+	return val;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = syscall_get_return_value(task, regs);
+
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		val = error;
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = lower_32_bits(val);
+
+	regs->regs[0] = val;
+}
+
+#define SYSCALL_MAX_ARGS 6
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long *args)
+{
+	args[0] = regs->orig_x0;
+	args++;
+
+	memcpy(args, &regs->regs[1], 5 * sizeof(args[0]));
+}
+
+/*
+ * We don't care about endianness (__AUDIT_ARCH_LE bit) here because
+ * AArch64 has the same system calls both on little- and big- endian.
+ */
+static inline int syscall_get_arch(struct task_struct *task)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return AUDIT_ARCH_ARM;
+
+	return AUDIT_ARCH_AARCH64;
+}
+
+int syscall_trace_enter(struct pt_regs *regs);
+void syscall_trace_exit(struct pt_regs *regs);
+
+#endif	/* __ASM_SYSCALL_H */
diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h
new file mode 100644
index 000000000..7a0e7b59b
--- /dev/null
+++ b/arch/arm64/include/asm/syscall_wrapper.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * syscall_wrapper.h - arm64 specific wrappers to syscall definitions
+ *
+ * Based on arch/x86/include/asm_syscall_wrapper.h
+ */
+
+#ifndef __ASM_SYSCALL_WRAPPER_H
+#define __ASM_SYSCALL_WRAPPER_H
+
+#include <asm/ptrace.h>
+
+#define SC_ARM64_REGS_TO_ARGS(x, ...)				\
+	__MAP(x,__SC_ARGS					\
+	      ,,regs->regs[0],,regs->regs[1],,regs->regs[2]	\
+	      ,,regs->regs[3],,regs->regs[4],,regs->regs[5])
+
+#ifdef CONFIG_COMPAT
+
+#define COMPAT_SYSCALL_DEFINEx(x, name, ...)						\
+	asmlinkage long __arm64_compat_sys##name(const struct pt_regs *regs);		\
+	ALLOW_ERROR_INJECTION(__arm64_compat_sys##name, ERRNO);				\
+	static long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));		\
+	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
+	asmlinkage long __arm64_compat_sys##name(const struct pt_regs *regs)		\
+	{										\
+		return __se_compat_sys##name(SC_ARM64_REGS_TO_ARGS(x,__VA_ARGS__));	\
+	}										\
+	static long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))		\
+	{										\
+		return __do_compat_sys##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__));	\
+	}										\
+	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
+
+#define COMPAT_SYSCALL_DEFINE0(sname)							\
+	asmlinkage long __arm64_compat_sys_##sname(const struct pt_regs *__unused);	\
+	ALLOW_ERROR_INJECTION(__arm64_compat_sys_##sname, ERRNO);			\
+	asmlinkage long __arm64_compat_sys_##sname(const struct pt_regs *__unused)
+
+#define COND_SYSCALL_COMPAT(name) 							\
+	asmlinkage long __arm64_compat_sys_##name(const struct pt_regs *regs);		\
+	asmlinkage long __weak __arm64_compat_sys_##name(const struct pt_regs *regs)	\
+	{										\
+		return sys_ni_syscall();						\
+	}
+
+#endif /* CONFIG_COMPAT */
+
+#define __SYSCALL_DEFINEx(x, name, ...)						\
+	asmlinkage long __arm64_sys##name(const struct pt_regs *regs);		\
+	ALLOW_ERROR_INJECTION(__arm64_sys##name, ERRNO);			\
+	static long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));		\
+	static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
+	asmlinkage long __arm64_sys##name(const struct pt_regs *regs);		\
+	asmlinkage long __arm64_sys##name(const struct pt_regs *regs)		\
+	{									\
+		return __se_sys##name(SC_ARM64_REGS_TO_ARGS(x,__VA_ARGS__));	\
+	}									\
+	static long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))		\
+	{									\
+		long ret = __do_sys##name(__MAP(x,__SC_CAST,__VA_ARGS__));	\
+		__MAP(x,__SC_TEST,__VA_ARGS__);					\
+		__PROTECT(x, ret,__MAP(x,__SC_ARGS,__VA_ARGS__));		\
+		return ret;							\
+	}									\
+	static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))
+
+#define SYSCALL_DEFINE0(sname)							\
+	SYSCALL_METADATA(_##sname, 0);						\
+	asmlinkage long __arm64_sys_##sname(const struct pt_regs *__unused);	\
+	ALLOW_ERROR_INJECTION(__arm64_sys_##sname, ERRNO);			\
+	asmlinkage long __arm64_sys_##sname(const struct pt_regs *__unused)
+
+#define COND_SYSCALL(name)							\
+	asmlinkage long __arm64_sys_##name(const struct pt_regs *regs);		\
+	asmlinkage long __weak __arm64_sys_##name(const struct pt_regs *regs)	\
+	{									\
+		return sys_ni_syscall();					\
+	}
+
+asmlinkage long __arm64_sys_ni_syscall(const struct pt_regs *__unused);
+
+#endif /* __ASM_SYSCALL_WRAPPER_H */
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
new file mode 100644
index 000000000..38296579a
--- /dev/null
+++ b/arch/arm64/include/asm/sysreg.h
@@ -0,0 +1,1125 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Macros for accessing system registers with older binutils.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#ifndef __ASM_SYSREG_H
+#define __ASM_SYSREG_H
+
+#include <linux/bits.h>
+#include <linux/stringify.h>
+#include <linux/kasan-tags.h>
+
+#include <asm/gpr-num.h>
+
+/*
+ * ARMv8 ARM reserves the following encoding for system registers:
+ * (Ref: ARMv8 ARM, Section: "System instruction class encoding overview",
+ *  C5.2, version:ARM DDI 0487A.f)
+ *	[20-19] : Op0
+ *	[18-16] : Op1
+ *	[15-12] : CRn
+ *	[11-8]  : CRm
+ *	[7-5]   : Op2
+ */
+#define Op0_shift	19
+#define Op0_mask	0x3
+#define Op1_shift	16
+#define Op1_mask	0x7
+#define CRn_shift	12
+#define CRn_mask	0xf
+#define CRm_shift	8
+#define CRm_mask	0xf
+#define Op2_shift	5
+#define Op2_mask	0x7
+
+#define sys_reg(op0, op1, crn, crm, op2) \
+	(((op0) << Op0_shift) | ((op1) << Op1_shift) | \
+	 ((crn) << CRn_shift) | ((crm) << CRm_shift) | \
+	 ((op2) << Op2_shift))
+
+#define sys_insn	sys_reg
+
+#define sys_reg_Op0(id)	(((id) >> Op0_shift) & Op0_mask)
+#define sys_reg_Op1(id)	(((id) >> Op1_shift) & Op1_mask)
+#define sys_reg_CRn(id)	(((id) >> CRn_shift) & CRn_mask)
+#define sys_reg_CRm(id)	(((id) >> CRm_shift) & CRm_mask)
+#define sys_reg_Op2(id)	(((id) >> Op2_shift) & Op2_mask)
+
+#ifndef CONFIG_BROKEN_GAS_INST
+
+#ifdef __ASSEMBLY__
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
+#else
+#define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
+#endif
+
+#else  /* CONFIG_BROKEN_GAS_INST */
+
+#ifndef CONFIG_CPU_BIG_ENDIAN
+#define __INSTR_BSWAP(x)		(x)
+#else  /* CONFIG_CPU_BIG_ENDIAN */
+#define __INSTR_BSWAP(x)		((((x) << 24) & 0xff000000)	| \
+					 (((x) <<  8) & 0x00ff0000)	| \
+					 (((x) >>  8) & 0x0000ff00)	| \
+					 (((x) >> 24) & 0x000000ff))
+#endif	/* CONFIG_CPU_BIG_ENDIAN */
+
+#ifdef __ASSEMBLY__
+#define __emit_inst(x)			.long __INSTR_BSWAP(x)
+#else  /* __ASSEMBLY__ */
+#define __emit_inst(x)			".long " __stringify(__INSTR_BSWAP(x)) "\n\t"
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_BROKEN_GAS_INST */
+
+/*
+ * Instructions for modifying PSTATE fields.
+ * As per Arm ARM for v8-A, Section "C.5.1.3 op0 == 0b00, architectural hints,
+ * barriers and CLREX, and PSTATE access", ARM DDI 0487 C.a, system instructions
+ * for accessing PSTATE fields have the following encoding:
+ *	Op0 = 0, CRn = 4
+ *	Op1, Op2 encodes the PSTATE field modified and defines the constraints.
+ *	CRm = Imm4 for the instruction.
+ *	Rt = 0x1f
+ */
+#define pstate_field(op1, op2)		((op1) << Op1_shift | (op2) << Op2_shift)
+#define PSTATE_Imm_shift		CRm_shift
+#define SET_PSTATE(x, r)		__emit_inst(0xd500401f | PSTATE_ ## r | ((!!x) << PSTATE_Imm_shift))
+
+#define PSTATE_PAN			pstate_field(0, 4)
+#define PSTATE_UAO			pstate_field(0, 3)
+#define PSTATE_SSBS			pstate_field(3, 1)
+#define PSTATE_DIT			pstate_field(3, 2)
+#define PSTATE_TCO			pstate_field(3, 4)
+
+#define SET_PSTATE_PAN(x)		SET_PSTATE((x), PAN)
+#define SET_PSTATE_UAO(x)		SET_PSTATE((x), UAO)
+#define SET_PSTATE_SSBS(x)		SET_PSTATE((x), SSBS)
+#define SET_PSTATE_DIT(x)		SET_PSTATE((x), DIT)
+#define SET_PSTATE_TCO(x)		SET_PSTATE((x), TCO)
+
+#define set_pstate_pan(x)		asm volatile(SET_PSTATE_PAN(x))
+#define set_pstate_uao(x)		asm volatile(SET_PSTATE_UAO(x))
+#define set_pstate_ssbs(x)		asm volatile(SET_PSTATE_SSBS(x))
+#define set_pstate_dit(x)		asm volatile(SET_PSTATE_DIT(x))
+
+#define __SYS_BARRIER_INSN(CRm, op2, Rt) \
+	__emit_inst(0xd5000000 | sys_insn(0, 3, 3, (CRm), (op2)) | ((Rt) & 0x1f))
+
+#define SB_BARRIER_INSN			__SYS_BARRIER_INSN(0, 7, 31)
+
+#define SYS_DC_ISW			sys_insn(1, 0, 7, 6, 2)
+#define SYS_DC_IGSW			sys_insn(1, 0, 7, 6, 4)
+#define SYS_DC_IGDSW			sys_insn(1, 0, 7, 6, 6)
+#define SYS_DC_CSW			sys_insn(1, 0, 7, 10, 2)
+#define SYS_DC_CGSW			sys_insn(1, 0, 7, 10, 4)
+#define SYS_DC_CGDSW			sys_insn(1, 0, 7, 10, 6)
+#define SYS_DC_CISW			sys_insn(1, 0, 7, 14, 2)
+#define SYS_DC_CIGSW			sys_insn(1, 0, 7, 14, 4)
+#define SYS_DC_CIGDSW			sys_insn(1, 0, 7, 14, 6)
+
+#define SYS_IC_IALLUIS			sys_insn(1, 0, 7, 1, 0)
+#define SYS_IC_IALLU			sys_insn(1, 0, 7, 5, 0)
+#define SYS_IC_IVAU			sys_insn(1, 3, 7, 5, 1)
+
+#define SYS_DC_IVAC			sys_insn(1, 0, 7, 6, 1)
+#define SYS_DC_IGVAC			sys_insn(1, 0, 7, 6, 3)
+#define SYS_DC_IGDVAC			sys_insn(1, 0, 7, 6, 5)
+
+#define SYS_DC_CVAC			sys_insn(1, 3, 7, 10, 1)
+#define SYS_DC_CGVAC			sys_insn(1, 3, 7, 10, 3)
+#define SYS_DC_CGDVAC			sys_insn(1, 3, 7, 10, 5)
+
+#define SYS_DC_CVAU			sys_insn(1, 3, 7, 11, 1)
+
+#define SYS_DC_CVAP			sys_insn(1, 3, 7, 12, 1)
+#define SYS_DC_CGVAP			sys_insn(1, 3, 7, 12, 3)
+#define SYS_DC_CGDVAP			sys_insn(1, 3, 7, 12, 5)
+
+#define SYS_DC_CVADP			sys_insn(1, 3, 7, 13, 1)
+#define SYS_DC_CGVADP			sys_insn(1, 3, 7, 13, 3)
+#define SYS_DC_CGDVADP			sys_insn(1, 3, 7, 13, 5)
+
+#define SYS_DC_CIVAC			sys_insn(1, 3, 7, 14, 1)
+#define SYS_DC_CIGVAC			sys_insn(1, 3, 7, 14, 3)
+#define SYS_DC_CIGDVAC			sys_insn(1, 3, 7, 14, 5)
+
+/* Data cache zero operations */
+#define SYS_DC_ZVA			sys_insn(1, 3, 7, 4, 1)
+#define SYS_DC_GVA			sys_insn(1, 3, 7, 4, 3)
+#define SYS_DC_GZVA			sys_insn(1, 3, 7, 4, 4)
+
+/*
+ * Automatically generated definitions for system registers, the
+ * manual encodings below are in the process of being converted to
+ * come from here. The header relies on the definition of sys_reg()
+ * earlier in this file.
+ */
+#include "asm/sysreg-defs.h"
+
+/*
+ * System registers, organised loosely by encoding but grouped together
+ * where the architected name contains an index. e.g. ID_MMFR<n>_EL1.
+ */
+#define SYS_SVCR_SMSTOP_SM_EL0		sys_reg(0, 3, 4, 2, 3)
+#define SYS_SVCR_SMSTART_SM_EL0		sys_reg(0, 3, 4, 3, 3)
+#define SYS_SVCR_SMSTOP_SMZA_EL0	sys_reg(0, 3, 4, 6, 3)
+
+#define SYS_DBGBVRn_EL1(n)		sys_reg(2, 0, 0, n, 4)
+#define SYS_DBGBCRn_EL1(n)		sys_reg(2, 0, 0, n, 5)
+#define SYS_DBGWVRn_EL1(n)		sys_reg(2, 0, 0, n, 6)
+#define SYS_DBGWCRn_EL1(n)		sys_reg(2, 0, 0, n, 7)
+#define SYS_MDRAR_EL1			sys_reg(2, 0, 1, 0, 0)
+
+#define SYS_OSLSR_EL1			sys_reg(2, 0, 1, 1, 4)
+#define OSLSR_EL1_OSLM_MASK		(BIT(3) | BIT(0))
+#define OSLSR_EL1_OSLM_NI		0
+#define OSLSR_EL1_OSLM_IMPLEMENTED	BIT(3)
+#define OSLSR_EL1_OSLK			BIT(1)
+
+#define SYS_OSDLR_EL1			sys_reg(2, 0, 1, 3, 4)
+#define SYS_DBGPRCR_EL1			sys_reg(2, 0, 1, 4, 4)
+#define SYS_DBGCLAIMSET_EL1		sys_reg(2, 0, 7, 8, 6)
+#define SYS_DBGCLAIMCLR_EL1		sys_reg(2, 0, 7, 9, 6)
+#define SYS_DBGAUTHSTATUS_EL1		sys_reg(2, 0, 7, 14, 6)
+#define SYS_MDCCSR_EL0			sys_reg(2, 3, 0, 1, 0)
+#define SYS_DBGDTR_EL0			sys_reg(2, 3, 0, 4, 0)
+#define SYS_DBGDTRRX_EL0		sys_reg(2, 3, 0, 5, 0)
+#define SYS_DBGDTRTX_EL0		sys_reg(2, 3, 0, 5, 0)
+#define SYS_DBGVCR32_EL2		sys_reg(2, 4, 0, 7, 0)
+
+#define SYS_BRBINF_EL1(n)		sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 0))
+#define SYS_BRBINFINJ_EL1		sys_reg(2, 1, 9, 1, 0)
+#define SYS_BRBSRC_EL1(n)		sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 1))
+#define SYS_BRBSRCINJ_EL1		sys_reg(2, 1, 9, 1, 1)
+#define SYS_BRBTGT_EL1(n)		sys_reg(2, 1, 8, (n & 15), (((n & 16) >> 2) | 2))
+#define SYS_BRBTGTINJ_EL1		sys_reg(2, 1, 9, 1, 2)
+#define SYS_BRBTS_EL1			sys_reg(2, 1, 9, 0, 2)
+
+#define SYS_BRBCR_EL1			sys_reg(2, 1, 9, 0, 0)
+#define SYS_BRBFCR_EL1			sys_reg(2, 1, 9, 0, 1)
+#define SYS_BRBIDR0_EL1			sys_reg(2, 1, 9, 2, 0)
+
+#define SYS_TRCITECR_EL1		sys_reg(3, 0, 1, 2, 3)
+#define SYS_TRCACATR(m)			sys_reg(2, 1, 2, ((m & 7) << 1), (2 | (m >> 3)))
+#define SYS_TRCACVR(m)			sys_reg(2, 1, 2, ((m & 7) << 1), (0 | (m >> 3)))
+#define SYS_TRCAUTHSTATUS		sys_reg(2, 1, 7, 14, 6)
+#define SYS_TRCAUXCTLR			sys_reg(2, 1, 0, 6, 0)
+#define SYS_TRCBBCTLR			sys_reg(2, 1, 0, 15, 0)
+#define SYS_TRCCCCTLR			sys_reg(2, 1, 0, 14, 0)
+#define SYS_TRCCIDCCTLR0		sys_reg(2, 1, 3, 0, 2)
+#define SYS_TRCCIDCCTLR1		sys_reg(2, 1, 3, 1, 2)
+#define SYS_TRCCIDCVR(m)		sys_reg(2, 1, 3, ((m & 7) << 1), 0)
+#define SYS_TRCCLAIMCLR			sys_reg(2, 1, 7, 9, 6)
+#define SYS_TRCCLAIMSET			sys_reg(2, 1, 7, 8, 6)
+#define SYS_TRCCNTCTLR(m)		sys_reg(2, 1, 0, (4 | (m & 3)), 5)
+#define SYS_TRCCNTRLDVR(m)		sys_reg(2, 1, 0, (0 | (m & 3)), 5)
+#define SYS_TRCCNTVR(m)			sys_reg(2, 1, 0, (8 | (m & 3)), 5)
+#define SYS_TRCCONFIGR			sys_reg(2, 1, 0, 4, 0)
+#define SYS_TRCDEVARCH			sys_reg(2, 1, 7, 15, 6)
+#define SYS_TRCDEVID			sys_reg(2, 1, 7, 2, 7)
+#define SYS_TRCEVENTCTL0R		sys_reg(2, 1, 0, 8, 0)
+#define SYS_TRCEVENTCTL1R		sys_reg(2, 1, 0, 9, 0)
+#define SYS_TRCEXTINSELR(m)		sys_reg(2, 1, 0, (8 | (m & 3)), 4)
+#define SYS_TRCIDR0			sys_reg(2, 1, 0, 8, 7)
+#define SYS_TRCIDR10			sys_reg(2, 1, 0, 2, 6)
+#define SYS_TRCIDR11			sys_reg(2, 1, 0, 3, 6)
+#define SYS_TRCIDR12			sys_reg(2, 1, 0, 4, 6)
+#define SYS_TRCIDR13			sys_reg(2, 1, 0, 5, 6)
+#define SYS_TRCIDR1			sys_reg(2, 1, 0, 9, 7)
+#define SYS_TRCIDR2			sys_reg(2, 1, 0, 10, 7)
+#define SYS_TRCIDR3			sys_reg(2, 1, 0, 11, 7)
+#define SYS_TRCIDR4			sys_reg(2, 1, 0, 12, 7)
+#define SYS_TRCIDR5			sys_reg(2, 1, 0, 13, 7)
+#define SYS_TRCIDR6			sys_reg(2, 1, 0, 14, 7)
+#define SYS_TRCIDR7			sys_reg(2, 1, 0, 15, 7)
+#define SYS_TRCIDR8			sys_reg(2, 1, 0, 0, 6)
+#define SYS_TRCIDR9			sys_reg(2, 1, 0, 1, 6)
+#define SYS_TRCIMSPEC(m)		sys_reg(2, 1, 0, (m & 7), 7)
+#define SYS_TRCITEEDCR			sys_reg(2, 1, 0, 2, 1)
+#define SYS_TRCOSLSR			sys_reg(2, 1, 1, 1, 4)
+#define SYS_TRCPRGCTLR			sys_reg(2, 1, 0, 1, 0)
+#define SYS_TRCQCTLR			sys_reg(2, 1, 0, 1, 1)
+#define SYS_TRCRSCTLR(m)		sys_reg(2, 1, 1, (m & 15), (0 | (m >> 4)))
+#define SYS_TRCRSR			sys_reg(2, 1, 0, 10, 0)
+#define SYS_TRCSEQEVR(m)		sys_reg(2, 1, 0, (m & 3), 4)
+#define SYS_TRCSEQRSTEVR		sys_reg(2, 1, 0, 6, 4)
+#define SYS_TRCSEQSTR			sys_reg(2, 1, 0, 7, 4)
+#define SYS_TRCSSCCR(m)			sys_reg(2, 1, 1, (m & 7), 2)
+#define SYS_TRCSSCSR(m)			sys_reg(2, 1, 1, (8 | (m & 7)), 2)
+#define SYS_TRCSSPCICR(m)		sys_reg(2, 1, 1, (m & 7), 3)
+#define SYS_TRCSTALLCTLR		sys_reg(2, 1, 0, 11, 0)
+#define SYS_TRCSTATR			sys_reg(2, 1, 0, 3, 0)
+#define SYS_TRCSYNCPR			sys_reg(2, 1, 0, 13, 0)
+#define SYS_TRCTRACEIDR			sys_reg(2, 1, 0, 0, 1)
+#define SYS_TRCTSCTLR			sys_reg(2, 1, 0, 12, 0)
+#define SYS_TRCVICTLR			sys_reg(2, 1, 0, 0, 2)
+#define SYS_TRCVIIECTLR			sys_reg(2, 1, 0, 1, 2)
+#define SYS_TRCVIPCSSCTLR		sys_reg(2, 1, 0, 3, 2)
+#define SYS_TRCVISSCTLR			sys_reg(2, 1, 0, 2, 2)
+#define SYS_TRCVMIDCCTLR0		sys_reg(2, 1, 3, 2, 2)
+#define SYS_TRCVMIDCCTLR1		sys_reg(2, 1, 3, 3, 2)
+#define SYS_TRCVMIDCVR(m)		sys_reg(2, 1, 3, ((m & 7) << 1), 1)
+
+/* ETM */
+#define SYS_TRCOSLAR			sys_reg(2, 1, 1, 0, 4)
+
+#define SYS_MIDR_EL1			sys_reg(3, 0, 0, 0, 0)
+#define SYS_MPIDR_EL1			sys_reg(3, 0, 0, 0, 5)
+#define SYS_REVIDR_EL1			sys_reg(3, 0, 0, 0, 6)
+
+#define SYS_ACTLR_EL1			sys_reg(3, 0, 1, 0, 1)
+#define SYS_RGSR_EL1			sys_reg(3, 0, 1, 0, 5)
+#define SYS_GCR_EL1			sys_reg(3, 0, 1, 0, 6)
+
+#define SYS_TRFCR_EL1			sys_reg(3, 0, 1, 2, 1)
+
+#define SYS_TCR_EL1			sys_reg(3, 0, 2, 0, 2)
+
+#define SYS_APIAKEYLO_EL1		sys_reg(3, 0, 2, 1, 0)
+#define SYS_APIAKEYHI_EL1		sys_reg(3, 0, 2, 1, 1)
+#define SYS_APIBKEYLO_EL1		sys_reg(3, 0, 2, 1, 2)
+#define SYS_APIBKEYHI_EL1		sys_reg(3, 0, 2, 1, 3)
+
+#define SYS_APDAKEYLO_EL1		sys_reg(3, 0, 2, 2, 0)
+#define SYS_APDAKEYHI_EL1		sys_reg(3, 0, 2, 2, 1)
+#define SYS_APDBKEYLO_EL1		sys_reg(3, 0, 2, 2, 2)
+#define SYS_APDBKEYHI_EL1		sys_reg(3, 0, 2, 2, 3)
+
+#define SYS_APGAKEYLO_EL1		sys_reg(3, 0, 2, 3, 0)
+#define SYS_APGAKEYHI_EL1		sys_reg(3, 0, 2, 3, 1)
+
+#define SYS_SPSR_EL1			sys_reg(3, 0, 4, 0, 0)
+#define SYS_ELR_EL1			sys_reg(3, 0, 4, 0, 1)
+
+#define SYS_ICC_PMR_EL1			sys_reg(3, 0, 4, 6, 0)
+
+#define SYS_AFSR0_EL1			sys_reg(3, 0, 5, 1, 0)
+#define SYS_AFSR1_EL1			sys_reg(3, 0, 5, 1, 1)
+#define SYS_ESR_EL1			sys_reg(3, 0, 5, 2, 0)
+
+#define SYS_ERRIDR_EL1			sys_reg(3, 0, 5, 3, 0)
+#define SYS_ERRSELR_EL1			sys_reg(3, 0, 5, 3, 1)
+#define SYS_ERXFR_EL1			sys_reg(3, 0, 5, 4, 0)
+#define SYS_ERXCTLR_EL1			sys_reg(3, 0, 5, 4, 1)
+#define SYS_ERXSTATUS_EL1		sys_reg(3, 0, 5, 4, 2)
+#define SYS_ERXADDR_EL1			sys_reg(3, 0, 5, 4, 3)
+#define SYS_ERXPFGF_EL1			sys_reg(3, 0, 5, 4, 4)
+#define SYS_ERXPFGCTL_EL1		sys_reg(3, 0, 5, 4, 5)
+#define SYS_ERXPFGCDN_EL1		sys_reg(3, 0, 5, 4, 6)
+#define SYS_ERXMISC0_EL1		sys_reg(3, 0, 5, 5, 0)
+#define SYS_ERXMISC1_EL1		sys_reg(3, 0, 5, 5, 1)
+#define SYS_ERXMISC2_EL1		sys_reg(3, 0, 5, 5, 2)
+#define SYS_ERXMISC3_EL1		sys_reg(3, 0, 5, 5, 3)
+#define SYS_TFSR_EL1			sys_reg(3, 0, 5, 6, 0)
+#define SYS_TFSRE0_EL1			sys_reg(3, 0, 5, 6, 1)
+
+#define SYS_PAR_EL1			sys_reg(3, 0, 7, 4, 0)
+
+#define SYS_PAR_EL1_F			BIT(0)
+#define SYS_PAR_EL1_FST			GENMASK(6, 1)
+
+/*** Statistical Profiling Extension ***/
+#define PMSEVFR_EL1_RES0_IMP	\
+	(GENMASK_ULL(47, 32) | GENMASK_ULL(23, 16) | GENMASK_ULL(11, 8) |\
+	 BIT_ULL(6) | BIT_ULL(4) | BIT_ULL(2) | BIT_ULL(0))
+#define PMSEVFR_EL1_RES0_V1P1	\
+	(PMSEVFR_EL1_RES0_IMP & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11)))
+#define PMSEVFR_EL1_RES0_V1P2	\
+	(PMSEVFR_EL1_RES0_V1P1 & ~BIT_ULL(6))
+
+/* Buffer error reporting */
+#define PMBSR_EL1_FAULT_FSC_SHIFT	PMBSR_EL1_MSS_SHIFT
+#define PMBSR_EL1_FAULT_FSC_MASK	PMBSR_EL1_MSS_MASK
+
+#define PMBSR_EL1_BUF_BSC_SHIFT		PMBSR_EL1_MSS_SHIFT
+#define PMBSR_EL1_BUF_BSC_MASK		PMBSR_EL1_MSS_MASK
+
+#define PMBSR_EL1_BUF_BSC_FULL		0x1UL
+
+/*** End of Statistical Profiling Extension ***/
+
+#define TRBSR_EL1_BSC_MASK		GENMASK(5, 0)
+#define TRBSR_EL1_BSC_SHIFT		0
+
+#define SYS_PMINTENSET_EL1		sys_reg(3, 0, 9, 14, 1)
+#define SYS_PMINTENCLR_EL1		sys_reg(3, 0, 9, 14, 2)
+
+#define SYS_PMMIR_EL1			sys_reg(3, 0, 9, 14, 6)
+
+#define SYS_MAIR_EL1			sys_reg(3, 0, 10, 2, 0)
+#define SYS_AMAIR_EL1			sys_reg(3, 0, 10, 3, 0)
+
+#define SYS_VBAR_EL1			sys_reg(3, 0, 12, 0, 0)
+#define SYS_DISR_EL1			sys_reg(3, 0, 12, 1, 1)
+
+#define SYS_ICC_IAR0_EL1		sys_reg(3, 0, 12, 8, 0)
+#define SYS_ICC_EOIR0_EL1		sys_reg(3, 0, 12, 8, 1)
+#define SYS_ICC_HPPIR0_EL1		sys_reg(3, 0, 12, 8, 2)
+#define SYS_ICC_BPR0_EL1		sys_reg(3, 0, 12, 8, 3)
+#define SYS_ICC_AP0Rn_EL1(n)		sys_reg(3, 0, 12, 8, 4 | n)
+#define SYS_ICC_AP0R0_EL1		SYS_ICC_AP0Rn_EL1(0)
+#define SYS_ICC_AP0R1_EL1		SYS_ICC_AP0Rn_EL1(1)
+#define SYS_ICC_AP0R2_EL1		SYS_ICC_AP0Rn_EL1(2)
+#define SYS_ICC_AP0R3_EL1		SYS_ICC_AP0Rn_EL1(3)
+#define SYS_ICC_AP1Rn_EL1(n)		sys_reg(3, 0, 12, 9, n)
+#define SYS_ICC_AP1R0_EL1		SYS_ICC_AP1Rn_EL1(0)
+#define SYS_ICC_AP1R1_EL1		SYS_ICC_AP1Rn_EL1(1)
+#define SYS_ICC_AP1R2_EL1		SYS_ICC_AP1Rn_EL1(2)
+#define SYS_ICC_AP1R3_EL1		SYS_ICC_AP1Rn_EL1(3)
+#define SYS_ICC_DIR_EL1			sys_reg(3, 0, 12, 11, 1)
+#define SYS_ICC_RPR_EL1			sys_reg(3, 0, 12, 11, 3)
+#define SYS_ICC_SGI1R_EL1		sys_reg(3, 0, 12, 11, 5)
+#define SYS_ICC_ASGI1R_EL1		sys_reg(3, 0, 12, 11, 6)
+#define SYS_ICC_SGI0R_EL1		sys_reg(3, 0, 12, 11, 7)
+#define SYS_ICC_IAR1_EL1		sys_reg(3, 0, 12, 12, 0)
+#define SYS_ICC_EOIR1_EL1		sys_reg(3, 0, 12, 12, 1)
+#define SYS_ICC_HPPIR1_EL1		sys_reg(3, 0, 12, 12, 2)
+#define SYS_ICC_BPR1_EL1		sys_reg(3, 0, 12, 12, 3)
+#define SYS_ICC_CTLR_EL1		sys_reg(3, 0, 12, 12, 4)
+#define SYS_ICC_SRE_EL1			sys_reg(3, 0, 12, 12, 5)
+#define SYS_ICC_IGRPEN0_EL1		sys_reg(3, 0, 12, 12, 6)
+#define SYS_ICC_IGRPEN1_EL1		sys_reg(3, 0, 12, 12, 7)
+
+#define SYS_ACCDATA_EL1			sys_reg(3, 0, 13, 0, 5)
+
+#define SYS_CNTKCTL_EL1			sys_reg(3, 0, 14, 1, 0)
+
+#define SYS_AIDR_EL1			sys_reg(3, 1, 0, 0, 7)
+
+#define SYS_RNDR_EL0			sys_reg(3, 3, 2, 4, 0)
+#define SYS_RNDRRS_EL0			sys_reg(3, 3, 2, 4, 1)
+
+#define SYS_PMCR_EL0			sys_reg(3, 3, 9, 12, 0)
+#define SYS_PMCNTENSET_EL0		sys_reg(3, 3, 9, 12, 1)
+#define SYS_PMCNTENCLR_EL0		sys_reg(3, 3, 9, 12, 2)
+#define SYS_PMOVSCLR_EL0		sys_reg(3, 3, 9, 12, 3)
+#define SYS_PMSWINC_EL0			sys_reg(3, 3, 9, 12, 4)
+#define SYS_PMSELR_EL0			sys_reg(3, 3, 9, 12, 5)
+#define SYS_PMCEID0_EL0			sys_reg(3, 3, 9, 12, 6)
+#define SYS_PMCEID1_EL0			sys_reg(3, 3, 9, 12, 7)
+#define SYS_PMCCNTR_EL0			sys_reg(3, 3, 9, 13, 0)
+#define SYS_PMXEVTYPER_EL0		sys_reg(3, 3, 9, 13, 1)
+#define SYS_PMXEVCNTR_EL0		sys_reg(3, 3, 9, 13, 2)
+#define SYS_PMUSERENR_EL0		sys_reg(3, 3, 9, 14, 0)
+#define SYS_PMOVSSET_EL0		sys_reg(3, 3, 9, 14, 3)
+
+#define SYS_TPIDR_EL0			sys_reg(3, 3, 13, 0, 2)
+#define SYS_TPIDRRO_EL0			sys_reg(3, 3, 13, 0, 3)
+#define SYS_TPIDR2_EL0			sys_reg(3, 3, 13, 0, 5)
+
+#define SYS_SCXTNUM_EL0			sys_reg(3, 3, 13, 0, 7)
+
+/* Definitions for system register interface to AMU for ARMv8.4 onwards */
+#define SYS_AM_EL0(crm, op2)		sys_reg(3, 3, 13, (crm), (op2))
+#define SYS_AMCR_EL0			SYS_AM_EL0(2, 0)
+#define SYS_AMCFGR_EL0			SYS_AM_EL0(2, 1)
+#define SYS_AMCGCR_EL0			SYS_AM_EL0(2, 2)
+#define SYS_AMUSERENR_EL0		SYS_AM_EL0(2, 3)
+#define SYS_AMCNTENCLR0_EL0		SYS_AM_EL0(2, 4)
+#define SYS_AMCNTENSET0_EL0		SYS_AM_EL0(2, 5)
+#define SYS_AMCNTENCLR1_EL0		SYS_AM_EL0(3, 0)
+#define SYS_AMCNTENSET1_EL0		SYS_AM_EL0(3, 1)
+
+/*
+ * Group 0 of activity monitors (architected):
+ *                op0  op1  CRn   CRm       op2
+ * Counter:       11   011  1101  010:n<3>  n<2:0>
+ * Type:          11   011  1101  011:n<3>  n<2:0>
+ * n: 0-15
+ *
+ * Group 1 of activity monitors (auxiliary):
+ *                op0  op1  CRn   CRm       op2
+ * Counter:       11   011  1101  110:n<3>  n<2:0>
+ * Type:          11   011  1101  111:n<3>  n<2:0>
+ * n: 0-15
+ */
+
+#define SYS_AMEVCNTR0_EL0(n)		SYS_AM_EL0(4 + ((n) >> 3), (n) & 7)
+#define SYS_AMEVTYPER0_EL0(n)		SYS_AM_EL0(6 + ((n) >> 3), (n) & 7)
+#define SYS_AMEVCNTR1_EL0(n)		SYS_AM_EL0(12 + ((n) >> 3), (n) & 7)
+#define SYS_AMEVTYPER1_EL0(n)		SYS_AM_EL0(14 + ((n) >> 3), (n) & 7)
+
+/* AMU v1: Fixed (architecturally defined) activity monitors */
+#define SYS_AMEVCNTR0_CORE_EL0		SYS_AMEVCNTR0_EL0(0)
+#define SYS_AMEVCNTR0_CONST_EL0		SYS_AMEVCNTR0_EL0(1)
+#define SYS_AMEVCNTR0_INST_RET_EL0	SYS_AMEVCNTR0_EL0(2)
+#define SYS_AMEVCNTR0_MEM_STALL		SYS_AMEVCNTR0_EL0(3)
+
+#define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
+
+#define SYS_CNTPCT_EL0			sys_reg(3, 3, 14, 0, 1)
+#define SYS_CNTPCTSS_EL0		sys_reg(3, 3, 14, 0, 5)
+#define SYS_CNTVCTSS_EL0		sys_reg(3, 3, 14, 0, 6)
+
+#define SYS_CNTP_TVAL_EL0		sys_reg(3, 3, 14, 2, 0)
+#define SYS_CNTP_CTL_EL0		sys_reg(3, 3, 14, 2, 1)
+#define SYS_CNTP_CVAL_EL0		sys_reg(3, 3, 14, 2, 2)
+
+#define SYS_CNTV_CTL_EL0		sys_reg(3, 3, 14, 3, 1)
+#define SYS_CNTV_CVAL_EL0		sys_reg(3, 3, 14, 3, 2)
+
+#define SYS_AARCH32_CNTP_TVAL		sys_reg(0, 0, 14, 2, 0)
+#define SYS_AARCH32_CNTP_CTL		sys_reg(0, 0, 14, 2, 1)
+#define SYS_AARCH32_CNTPCT		sys_reg(0, 0, 0, 14, 0)
+#define SYS_AARCH32_CNTP_CVAL		sys_reg(0, 2, 0, 14, 0)
+#define SYS_AARCH32_CNTPCTSS		sys_reg(0, 8, 0, 14, 0)
+
+#define __PMEV_op2(n)			((n) & 0x7)
+#define __CNTR_CRm(n)			(0x8 | (((n) >> 3) & 0x3))
+#define SYS_PMEVCNTRn_EL0(n)		sys_reg(3, 3, 14, __CNTR_CRm(n), __PMEV_op2(n))
+#define __TYPER_CRm(n)			(0xc | (((n) >> 3) & 0x3))
+#define SYS_PMEVTYPERn_EL0(n)		sys_reg(3, 3, 14, __TYPER_CRm(n), __PMEV_op2(n))
+
+#define SYS_PMCCFILTR_EL0		sys_reg(3, 3, 14, 15, 7)
+
+#define SYS_VPIDR_EL2			sys_reg(3, 4, 0, 0, 0)
+#define SYS_VMPIDR_EL2			sys_reg(3, 4, 0, 0, 5)
+
+#define SYS_SCTLR_EL2			sys_reg(3, 4, 1, 0, 0)
+#define SYS_ACTLR_EL2			sys_reg(3, 4, 1, 0, 1)
+#define SYS_HCR_EL2			sys_reg(3, 4, 1, 1, 0)
+#define SYS_MDCR_EL2			sys_reg(3, 4, 1, 1, 1)
+#define SYS_CPTR_EL2			sys_reg(3, 4, 1, 1, 2)
+#define SYS_HSTR_EL2			sys_reg(3, 4, 1, 1, 3)
+#define SYS_HACR_EL2			sys_reg(3, 4, 1, 1, 7)
+
+#define SYS_TTBR0_EL2			sys_reg(3, 4, 2, 0, 0)
+#define SYS_TTBR1_EL2			sys_reg(3, 4, 2, 0, 1)
+#define SYS_TCR_EL2			sys_reg(3, 4, 2, 0, 2)
+#define SYS_VTTBR_EL2			sys_reg(3, 4, 2, 1, 0)
+#define SYS_VTCR_EL2			sys_reg(3, 4, 2, 1, 2)
+
+#define SYS_TRFCR_EL2			sys_reg(3, 4, 1, 2, 1)
+#define SYS_HAFGRTR_EL2			sys_reg(3, 4, 3, 1, 6)
+#define SYS_SPSR_EL2			sys_reg(3, 4, 4, 0, 0)
+#define SYS_ELR_EL2			sys_reg(3, 4, 4, 0, 1)
+#define SYS_SP_EL1			sys_reg(3, 4, 4, 1, 0)
+#define SYS_IFSR32_EL2			sys_reg(3, 4, 5, 0, 1)
+#define SYS_AFSR0_EL2			sys_reg(3, 4, 5, 1, 0)
+#define SYS_AFSR1_EL2			sys_reg(3, 4, 5, 1, 1)
+#define SYS_ESR_EL2			sys_reg(3, 4, 5, 2, 0)
+#define SYS_VSESR_EL2			sys_reg(3, 4, 5, 2, 3)
+#define SYS_FPEXC32_EL2			sys_reg(3, 4, 5, 3, 0)
+#define SYS_TFSR_EL2			sys_reg(3, 4, 5, 6, 0)
+
+#define SYS_FAR_EL2			sys_reg(3, 4, 6, 0, 0)
+#define SYS_HPFAR_EL2			sys_reg(3, 4, 6, 0, 4)
+
+#define SYS_MAIR_EL2			sys_reg(3, 4, 10, 2, 0)
+#define SYS_AMAIR_EL2			sys_reg(3, 4, 10, 3, 0)
+
+#define SYS_VBAR_EL2			sys_reg(3, 4, 12, 0, 0)
+#define SYS_RVBAR_EL2			sys_reg(3, 4, 12, 0, 1)
+#define SYS_RMR_EL2			sys_reg(3, 4, 12, 0, 2)
+#define SYS_VDISR_EL2			sys_reg(3, 4, 12, 1, 1)
+#define __SYS__AP0Rx_EL2(x)		sys_reg(3, 4, 12, 8, x)
+#define SYS_ICH_AP0R0_EL2		__SYS__AP0Rx_EL2(0)
+#define SYS_ICH_AP0R1_EL2		__SYS__AP0Rx_EL2(1)
+#define SYS_ICH_AP0R2_EL2		__SYS__AP0Rx_EL2(2)
+#define SYS_ICH_AP0R3_EL2		__SYS__AP0Rx_EL2(3)
+
+#define __SYS__AP1Rx_EL2(x)		sys_reg(3, 4, 12, 9, x)
+#define SYS_ICH_AP1R0_EL2		__SYS__AP1Rx_EL2(0)
+#define SYS_ICH_AP1R1_EL2		__SYS__AP1Rx_EL2(1)
+#define SYS_ICH_AP1R2_EL2		__SYS__AP1Rx_EL2(2)
+#define SYS_ICH_AP1R3_EL2		__SYS__AP1Rx_EL2(3)
+
+#define SYS_ICH_VSEIR_EL2		sys_reg(3, 4, 12, 9, 4)
+#define SYS_ICC_SRE_EL2			sys_reg(3, 4, 12, 9, 5)
+#define SYS_ICH_HCR_EL2			sys_reg(3, 4, 12, 11, 0)
+#define SYS_ICH_VTR_EL2			sys_reg(3, 4, 12, 11, 1)
+#define SYS_ICH_MISR_EL2		sys_reg(3, 4, 12, 11, 2)
+#define SYS_ICH_EISR_EL2		sys_reg(3, 4, 12, 11, 3)
+#define SYS_ICH_ELRSR_EL2		sys_reg(3, 4, 12, 11, 5)
+#define SYS_ICH_VMCR_EL2		sys_reg(3, 4, 12, 11, 7)
+
+#define __SYS__LR0_EL2(x)		sys_reg(3, 4, 12, 12, x)
+#define SYS_ICH_LR0_EL2			__SYS__LR0_EL2(0)
+#define SYS_ICH_LR1_EL2			__SYS__LR0_EL2(1)
+#define SYS_ICH_LR2_EL2			__SYS__LR0_EL2(2)
+#define SYS_ICH_LR3_EL2			__SYS__LR0_EL2(3)
+#define SYS_ICH_LR4_EL2			__SYS__LR0_EL2(4)
+#define SYS_ICH_LR5_EL2			__SYS__LR0_EL2(5)
+#define SYS_ICH_LR6_EL2			__SYS__LR0_EL2(6)
+#define SYS_ICH_LR7_EL2			__SYS__LR0_EL2(7)
+
+#define __SYS__LR8_EL2(x)		sys_reg(3, 4, 12, 13, x)
+#define SYS_ICH_LR8_EL2			__SYS__LR8_EL2(0)
+#define SYS_ICH_LR9_EL2			__SYS__LR8_EL2(1)
+#define SYS_ICH_LR10_EL2		__SYS__LR8_EL2(2)
+#define SYS_ICH_LR11_EL2		__SYS__LR8_EL2(3)
+#define SYS_ICH_LR12_EL2		__SYS__LR8_EL2(4)
+#define SYS_ICH_LR13_EL2		__SYS__LR8_EL2(5)
+#define SYS_ICH_LR14_EL2		__SYS__LR8_EL2(6)
+#define SYS_ICH_LR15_EL2		__SYS__LR8_EL2(7)
+
+#define SYS_CONTEXTIDR_EL2		sys_reg(3, 4, 13, 0, 1)
+#define SYS_TPIDR_EL2			sys_reg(3, 4, 13, 0, 2)
+
+#define SYS_CNTVOFF_EL2			sys_reg(3, 4, 14, 0, 3)
+#define SYS_CNTHCTL_EL2			sys_reg(3, 4, 14, 1, 0)
+
+/* VHE encodings for architectural EL0/1 system registers */
+#define SYS_SCTLR_EL12			sys_reg(3, 5, 1, 0, 0)
+#define SYS_TTBR0_EL12			sys_reg(3, 5, 2, 0, 0)
+#define SYS_TTBR1_EL12			sys_reg(3, 5, 2, 0, 1)
+#define SYS_TCR_EL12			sys_reg(3, 5, 2, 0, 2)
+#define SYS_SPSR_EL12			sys_reg(3, 5, 4, 0, 0)
+#define SYS_ELR_EL12			sys_reg(3, 5, 4, 0, 1)
+#define SYS_AFSR0_EL12			sys_reg(3, 5, 5, 1, 0)
+#define SYS_AFSR1_EL12			sys_reg(3, 5, 5, 1, 1)
+#define SYS_ESR_EL12			sys_reg(3, 5, 5, 2, 0)
+#define SYS_TFSR_EL12			sys_reg(3, 5, 5, 6, 0)
+#define SYS_MAIR_EL12			sys_reg(3, 5, 10, 2, 0)
+#define SYS_AMAIR_EL12			sys_reg(3, 5, 10, 3, 0)
+#define SYS_VBAR_EL12			sys_reg(3, 5, 12, 0, 0)
+#define SYS_CNTKCTL_EL12		sys_reg(3, 5, 14, 1, 0)
+#define SYS_CNTP_TVAL_EL02		sys_reg(3, 5, 14, 2, 0)
+#define SYS_CNTP_CTL_EL02		sys_reg(3, 5, 14, 2, 1)
+#define SYS_CNTP_CVAL_EL02		sys_reg(3, 5, 14, 2, 2)
+#define SYS_CNTV_TVAL_EL02		sys_reg(3, 5, 14, 3, 0)
+#define SYS_CNTV_CTL_EL02		sys_reg(3, 5, 14, 3, 1)
+#define SYS_CNTV_CVAL_EL02		sys_reg(3, 5, 14, 3, 2)
+
+#define SYS_SP_EL2			sys_reg(3, 6,  4, 1, 0)
+
+/* AT instructions */
+#define AT_Op0 1
+#define AT_CRn 7
+
+#define OP_AT_S1E1R	sys_insn(AT_Op0, 0, AT_CRn, 8, 0)
+#define OP_AT_S1E1W	sys_insn(AT_Op0, 0, AT_CRn, 8, 1)
+#define OP_AT_S1E0R	sys_insn(AT_Op0, 0, AT_CRn, 8, 2)
+#define OP_AT_S1E0W	sys_insn(AT_Op0, 0, AT_CRn, 8, 3)
+#define OP_AT_S1E1RP	sys_insn(AT_Op0, 0, AT_CRn, 9, 0)
+#define OP_AT_S1E1WP	sys_insn(AT_Op0, 0, AT_CRn, 9, 1)
+#define OP_AT_S1E2R	sys_insn(AT_Op0, 4, AT_CRn, 8, 0)
+#define OP_AT_S1E2W	sys_insn(AT_Op0, 4, AT_CRn, 8, 1)
+#define OP_AT_S12E1R	sys_insn(AT_Op0, 4, AT_CRn, 8, 4)
+#define OP_AT_S12E1W	sys_insn(AT_Op0, 4, AT_CRn, 8, 5)
+#define OP_AT_S12E0R	sys_insn(AT_Op0, 4, AT_CRn, 8, 6)
+#define OP_AT_S12E0W	sys_insn(AT_Op0, 4, AT_CRn, 8, 7)
+
+/* TLBI instructions */
+#define OP_TLBI_VMALLE1OS		sys_insn(1, 0, 8, 1, 0)
+#define OP_TLBI_VAE1OS			sys_insn(1, 0, 8, 1, 1)
+#define OP_TLBI_ASIDE1OS		sys_insn(1, 0, 8, 1, 2)
+#define OP_TLBI_VAAE1OS			sys_insn(1, 0, 8, 1, 3)
+#define OP_TLBI_VALE1OS			sys_insn(1, 0, 8, 1, 5)
+#define OP_TLBI_VAALE1OS		sys_insn(1, 0, 8, 1, 7)
+#define OP_TLBI_RVAE1IS			sys_insn(1, 0, 8, 2, 1)
+#define OP_TLBI_RVAAE1IS		sys_insn(1, 0, 8, 2, 3)
+#define OP_TLBI_RVALE1IS		sys_insn(1, 0, 8, 2, 5)
+#define OP_TLBI_RVAALE1IS		sys_insn(1, 0, 8, 2, 7)
+#define OP_TLBI_VMALLE1IS		sys_insn(1, 0, 8, 3, 0)
+#define OP_TLBI_VAE1IS			sys_insn(1, 0, 8, 3, 1)
+#define OP_TLBI_ASIDE1IS		sys_insn(1, 0, 8, 3, 2)
+#define OP_TLBI_VAAE1IS			sys_insn(1, 0, 8, 3, 3)
+#define OP_TLBI_VALE1IS			sys_insn(1, 0, 8, 3, 5)
+#define OP_TLBI_VAALE1IS		sys_insn(1, 0, 8, 3, 7)
+#define OP_TLBI_RVAE1OS			sys_insn(1, 0, 8, 5, 1)
+#define OP_TLBI_RVAAE1OS		sys_insn(1, 0, 8, 5, 3)
+#define OP_TLBI_RVALE1OS		sys_insn(1, 0, 8, 5, 5)
+#define OP_TLBI_RVAALE1OS		sys_insn(1, 0, 8, 5, 7)
+#define OP_TLBI_RVAE1			sys_insn(1, 0, 8, 6, 1)
+#define OP_TLBI_RVAAE1			sys_insn(1, 0, 8, 6, 3)
+#define OP_TLBI_RVALE1			sys_insn(1, 0, 8, 6, 5)
+#define OP_TLBI_RVAALE1			sys_insn(1, 0, 8, 6, 7)
+#define OP_TLBI_VMALLE1			sys_insn(1, 0, 8, 7, 0)
+#define OP_TLBI_VAE1			sys_insn(1, 0, 8, 7, 1)
+#define OP_TLBI_ASIDE1			sys_insn(1, 0, 8, 7, 2)
+#define OP_TLBI_VAAE1			sys_insn(1, 0, 8, 7, 3)
+#define OP_TLBI_VALE1			sys_insn(1, 0, 8, 7, 5)
+#define OP_TLBI_VAALE1			sys_insn(1, 0, 8, 7, 7)
+#define OP_TLBI_VMALLE1OSNXS		sys_insn(1, 0, 9, 1, 0)
+#define OP_TLBI_VAE1OSNXS		sys_insn(1, 0, 9, 1, 1)
+#define OP_TLBI_ASIDE1OSNXS		sys_insn(1, 0, 9, 1, 2)
+#define OP_TLBI_VAAE1OSNXS		sys_insn(1, 0, 9, 1, 3)
+#define OP_TLBI_VALE1OSNXS		sys_insn(1, 0, 9, 1, 5)
+#define OP_TLBI_VAALE1OSNXS		sys_insn(1, 0, 9, 1, 7)
+#define OP_TLBI_RVAE1ISNXS		sys_insn(1, 0, 9, 2, 1)
+#define OP_TLBI_RVAAE1ISNXS		sys_insn(1, 0, 9, 2, 3)
+#define OP_TLBI_RVALE1ISNXS		sys_insn(1, 0, 9, 2, 5)
+#define OP_TLBI_RVAALE1ISNXS		sys_insn(1, 0, 9, 2, 7)
+#define OP_TLBI_VMALLE1ISNXS		sys_insn(1, 0, 9, 3, 0)
+#define OP_TLBI_VAE1ISNXS		sys_insn(1, 0, 9, 3, 1)
+#define OP_TLBI_ASIDE1ISNXS		sys_insn(1, 0, 9, 3, 2)
+#define OP_TLBI_VAAE1ISNXS		sys_insn(1, 0, 9, 3, 3)
+#define OP_TLBI_VALE1ISNXS		sys_insn(1, 0, 9, 3, 5)
+#define OP_TLBI_VAALE1ISNXS		sys_insn(1, 0, 9, 3, 7)
+#define OP_TLBI_RVAE1OSNXS		sys_insn(1, 0, 9, 5, 1)
+#define OP_TLBI_RVAAE1OSNXS		sys_insn(1, 0, 9, 5, 3)
+#define OP_TLBI_RVALE1OSNXS		sys_insn(1, 0, 9, 5, 5)
+#define OP_TLBI_RVAALE1OSNXS		sys_insn(1, 0, 9, 5, 7)
+#define OP_TLBI_RVAE1NXS		sys_insn(1, 0, 9, 6, 1)
+#define OP_TLBI_RVAAE1NXS		sys_insn(1, 0, 9, 6, 3)
+#define OP_TLBI_RVALE1NXS		sys_insn(1, 0, 9, 6, 5)
+#define OP_TLBI_RVAALE1NXS		sys_insn(1, 0, 9, 6, 7)
+#define OP_TLBI_VMALLE1NXS		sys_insn(1, 0, 9, 7, 0)
+#define OP_TLBI_VAE1NXS			sys_insn(1, 0, 9, 7, 1)
+#define OP_TLBI_ASIDE1NXS		sys_insn(1, 0, 9, 7, 2)
+#define OP_TLBI_VAAE1NXS		sys_insn(1, 0, 9, 7, 3)
+#define OP_TLBI_VALE1NXS		sys_insn(1, 0, 9, 7, 5)
+#define OP_TLBI_VAALE1NXS		sys_insn(1, 0, 9, 7, 7)
+#define OP_TLBI_IPAS2E1IS		sys_insn(1, 4, 8, 0, 1)
+#define OP_TLBI_RIPAS2E1IS		sys_insn(1, 4, 8, 0, 2)
+#define OP_TLBI_IPAS2LE1IS		sys_insn(1, 4, 8, 0, 5)
+#define OP_TLBI_RIPAS2LE1IS		sys_insn(1, 4, 8, 0, 6)
+#define OP_TLBI_ALLE2OS			sys_insn(1, 4, 8, 1, 0)
+#define OP_TLBI_VAE2OS			sys_insn(1, 4, 8, 1, 1)
+#define OP_TLBI_ALLE1OS			sys_insn(1, 4, 8, 1, 4)
+#define OP_TLBI_VALE2OS			sys_insn(1, 4, 8, 1, 5)
+#define OP_TLBI_VMALLS12E1OS		sys_insn(1, 4, 8, 1, 6)
+#define OP_TLBI_RVAE2IS			sys_insn(1, 4, 8, 2, 1)
+#define OP_TLBI_RVALE2IS		sys_insn(1, 4, 8, 2, 5)
+#define OP_TLBI_ALLE2IS			sys_insn(1, 4, 8, 3, 0)
+#define OP_TLBI_VAE2IS			sys_insn(1, 4, 8, 3, 1)
+#define OP_TLBI_ALLE1IS			sys_insn(1, 4, 8, 3, 4)
+#define OP_TLBI_VALE2IS			sys_insn(1, 4, 8, 3, 5)
+#define OP_TLBI_VMALLS12E1IS		sys_insn(1, 4, 8, 3, 6)
+#define OP_TLBI_IPAS2E1OS		sys_insn(1, 4, 8, 4, 0)
+#define OP_TLBI_IPAS2E1			sys_insn(1, 4, 8, 4, 1)
+#define OP_TLBI_RIPAS2E1		sys_insn(1, 4, 8, 4, 2)
+#define OP_TLBI_RIPAS2E1OS		sys_insn(1, 4, 8, 4, 3)
+#define OP_TLBI_IPAS2LE1OS		sys_insn(1, 4, 8, 4, 4)
+#define OP_TLBI_IPAS2LE1		sys_insn(1, 4, 8, 4, 5)
+#define OP_TLBI_RIPAS2LE1		sys_insn(1, 4, 8, 4, 6)
+#define OP_TLBI_RIPAS2LE1OS		sys_insn(1, 4, 8, 4, 7)
+#define OP_TLBI_RVAE2OS			sys_insn(1, 4, 8, 5, 1)
+#define OP_TLBI_RVALE2OS		sys_insn(1, 4, 8, 5, 5)
+#define OP_TLBI_RVAE2			sys_insn(1, 4, 8, 6, 1)
+#define OP_TLBI_RVALE2			sys_insn(1, 4, 8, 6, 5)
+#define OP_TLBI_ALLE2			sys_insn(1, 4, 8, 7, 0)
+#define OP_TLBI_VAE2			sys_insn(1, 4, 8, 7, 1)
+#define OP_TLBI_ALLE1			sys_insn(1, 4, 8, 7, 4)
+#define OP_TLBI_VALE2			sys_insn(1, 4, 8, 7, 5)
+#define OP_TLBI_VMALLS12E1		sys_insn(1, 4, 8, 7, 6)
+#define OP_TLBI_IPAS2E1ISNXS		sys_insn(1, 4, 9, 0, 1)
+#define OP_TLBI_RIPAS2E1ISNXS		sys_insn(1, 4, 9, 0, 2)
+#define OP_TLBI_IPAS2LE1ISNXS		sys_insn(1, 4, 9, 0, 5)
+#define OP_TLBI_RIPAS2LE1ISNXS		sys_insn(1, 4, 9, 0, 6)
+#define OP_TLBI_ALLE2OSNXS		sys_insn(1, 4, 9, 1, 0)
+#define OP_TLBI_VAE2OSNXS		sys_insn(1, 4, 9, 1, 1)
+#define OP_TLBI_ALLE1OSNXS		sys_insn(1, 4, 9, 1, 4)
+#define OP_TLBI_VALE2OSNXS		sys_insn(1, 4, 9, 1, 5)
+#define OP_TLBI_VMALLS12E1OSNXS		sys_insn(1, 4, 9, 1, 6)
+#define OP_TLBI_RVAE2ISNXS		sys_insn(1, 4, 9, 2, 1)
+#define OP_TLBI_RVALE2ISNXS		sys_insn(1, 4, 9, 2, 5)
+#define OP_TLBI_ALLE2ISNXS		sys_insn(1, 4, 9, 3, 0)
+#define OP_TLBI_VAE2ISNXS		sys_insn(1, 4, 9, 3, 1)
+#define OP_TLBI_ALLE1ISNXS		sys_insn(1, 4, 9, 3, 4)
+#define OP_TLBI_VALE2ISNXS		sys_insn(1, 4, 9, 3, 5)
+#define OP_TLBI_VMALLS12E1ISNXS		sys_insn(1, 4, 9, 3, 6)
+#define OP_TLBI_IPAS2E1OSNXS		sys_insn(1, 4, 9, 4, 0)
+#define OP_TLBI_IPAS2E1NXS		sys_insn(1, 4, 9, 4, 1)
+#define OP_TLBI_RIPAS2E1NXS		sys_insn(1, 4, 9, 4, 2)
+#define OP_TLBI_RIPAS2E1OSNXS		sys_insn(1, 4, 9, 4, 3)
+#define OP_TLBI_IPAS2LE1OSNXS		sys_insn(1, 4, 9, 4, 4)
+#define OP_TLBI_IPAS2LE1NXS		sys_insn(1, 4, 9, 4, 5)
+#define OP_TLBI_RIPAS2LE1NXS		sys_insn(1, 4, 9, 4, 6)
+#define OP_TLBI_RIPAS2LE1OSNXS		sys_insn(1, 4, 9, 4, 7)
+#define OP_TLBI_RVAE2OSNXS		sys_insn(1, 4, 9, 5, 1)
+#define OP_TLBI_RVALE2OSNXS		sys_insn(1, 4, 9, 5, 5)
+#define OP_TLBI_RVAE2NXS		sys_insn(1, 4, 9, 6, 1)
+#define OP_TLBI_RVALE2NXS		sys_insn(1, 4, 9, 6, 5)
+#define OP_TLBI_ALLE2NXS		sys_insn(1, 4, 9, 7, 0)
+#define OP_TLBI_VAE2NXS			sys_insn(1, 4, 9, 7, 1)
+#define OP_TLBI_ALLE1NXS		sys_insn(1, 4, 9, 7, 4)
+#define OP_TLBI_VALE2NXS		sys_insn(1, 4, 9, 7, 5)
+#define OP_TLBI_VMALLS12E1NXS		sys_insn(1, 4, 9, 7, 6)
+
+/* Misc instructions */
+#define OP_BRB_IALL			sys_insn(1, 1, 7, 2, 4)
+#define OP_BRB_INJ			sys_insn(1, 1, 7, 2, 5)
+#define OP_CFP_RCTX			sys_insn(1, 3, 7, 3, 4)
+#define OP_DVP_RCTX			sys_insn(1, 3, 7, 3, 5)
+#define OP_CPP_RCTX			sys_insn(1, 3, 7, 3, 7)
+
+/* Common SCTLR_ELx flags. */
+#define SCTLR_ELx_ENTP2	(BIT(60))
+#define SCTLR_ELx_DSSBS	(BIT(44))
+#define SCTLR_ELx_ATA	(BIT(43))
+
+#define SCTLR_ELx_EE_SHIFT	25
+#define SCTLR_ELx_ENIA_SHIFT	31
+
+#define SCTLR_ELx_ITFSB	 (BIT(37))
+#define SCTLR_ELx_ENIA	 (BIT(SCTLR_ELx_ENIA_SHIFT))
+#define SCTLR_ELx_ENIB	 (BIT(30))
+#define SCTLR_ELx_LSMAOE (BIT(29))
+#define SCTLR_ELx_nTLSMD (BIT(28))
+#define SCTLR_ELx_ENDA	 (BIT(27))
+#define SCTLR_ELx_EE     (BIT(SCTLR_ELx_EE_SHIFT))
+#define SCTLR_ELx_EIS	 (BIT(22))
+#define SCTLR_ELx_IESB	 (BIT(21))
+#define SCTLR_ELx_TSCXT	 (BIT(20))
+#define SCTLR_ELx_WXN	 (BIT(19))
+#define SCTLR_ELx_ENDB	 (BIT(13))
+#define SCTLR_ELx_I	 (BIT(12))
+#define SCTLR_ELx_EOS	 (BIT(11))
+#define SCTLR_ELx_SA	 (BIT(3))
+#define SCTLR_ELx_C	 (BIT(2))
+#define SCTLR_ELx_A	 (BIT(1))
+#define SCTLR_ELx_M	 (BIT(0))
+
+/* SCTLR_EL2 specific flags. */
+#define SCTLR_EL2_RES1	((BIT(4))  | (BIT(5))  | (BIT(11)) | (BIT(16)) | \
+			 (BIT(18)) | (BIT(22)) | (BIT(23)) | (BIT(28)) | \
+			 (BIT(29)))
+
+#define SCTLR_EL2_BT	(BIT(36))
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ENDIAN_SET_EL2		SCTLR_ELx_EE
+#else
+#define ENDIAN_SET_EL2		0
+#endif
+
+#define INIT_SCTLR_EL2_MMU_ON						\
+	(SCTLR_ELx_M  | SCTLR_ELx_C | SCTLR_ELx_SA | SCTLR_ELx_I |	\
+	 SCTLR_ELx_IESB | SCTLR_ELx_WXN | ENDIAN_SET_EL2 |		\
+	 SCTLR_ELx_ITFSB | SCTLR_EL2_RES1)
+
+#define INIT_SCTLR_EL2_MMU_OFF \
+	(SCTLR_EL2_RES1 | ENDIAN_SET_EL2)
+
+/* SCTLR_EL1 specific flags. */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define ENDIAN_SET_EL1		(SCTLR_EL1_E0E | SCTLR_ELx_EE)
+#else
+#define ENDIAN_SET_EL1		0
+#endif
+
+#define INIT_SCTLR_EL1_MMU_OFF \
+	(ENDIAN_SET_EL1 | SCTLR_EL1_LSMAOE | SCTLR_EL1_nTLSMD | \
+	 SCTLR_EL1_EIS  | SCTLR_EL1_TSCXT  | SCTLR_EL1_EOS)
+
+#define INIT_SCTLR_EL1_MMU_ON \
+	(SCTLR_ELx_M      | SCTLR_ELx_C      | SCTLR_ELx_SA    | \
+	 SCTLR_EL1_SA0    | SCTLR_EL1_SED    | SCTLR_ELx_I     | \
+	 SCTLR_EL1_DZE    | SCTLR_EL1_UCT    | SCTLR_EL1_nTWE  | \
+	 SCTLR_ELx_IESB   | SCTLR_EL1_SPAN   | SCTLR_ELx_ITFSB | \
+	 ENDIAN_SET_EL1   | SCTLR_EL1_UCI    | SCTLR_EL1_EPAN  | \
+	 SCTLR_EL1_LSMAOE | SCTLR_EL1_nTLSMD | SCTLR_EL1_EIS   | \
+	 SCTLR_EL1_TSCXT  | SCTLR_EL1_EOS)
+
+/* MAIR_ELx memory attributes (used by Linux) */
+#define MAIR_ATTR_DEVICE_nGnRnE		UL(0x00)
+#define MAIR_ATTR_DEVICE_nGnRE		UL(0x04)
+#define MAIR_ATTR_NORMAL_NC		UL(0x44)
+#define MAIR_ATTR_NORMAL_TAGGED		UL(0xf0)
+#define MAIR_ATTR_NORMAL		UL(0xff)
+#define MAIR_ATTR_MASK			UL(0xff)
+
+/* Position the attr at the correct index */
+#define MAIR_ATTRIDX(attr, idx)		((attr) << ((idx) * 8))
+
+/* id_aa64pfr0 */
+#define ID_AA64PFR0_EL1_ELx_64BIT_ONLY		0x1
+#define ID_AA64PFR0_EL1_ELx_32BIT_64BIT		0x2
+
+/* id_aa64mmfr0 */
+#define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN	0x0
+#define ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX	0x7
+#define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN	0x0
+#define ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX	0x7
+#define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN	0x1
+#define ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX	0xf
+
+#define ARM64_MIN_PARANGE_BITS		32
+
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT	0x0
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE		0x1
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN		0x2
+#define ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX		0x7
+
+#ifdef CONFIG_ARM64_PA_BITS_52
+#define ID_AA64MMFR0_EL1_PARANGE_MAX	ID_AA64MMFR0_EL1_PARANGE_52
+#else
+#define ID_AA64MMFR0_EL1_PARANGE_MAX	ID_AA64MMFR0_EL1_PARANGE_48
+#endif
+
+#if defined(CONFIG_ARM64_4K_PAGES)
+#define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MIN
+#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN4_SUPPORTED_MAX
+#define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MIN
+#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN16_SUPPORTED_MAX
+#define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT
+#elif defined(CONFIG_ARM64_64K_PAGES)
+#define ID_AA64MMFR0_EL1_TGRAN_SHIFT		ID_AA64MMFR0_EL1_TGRAN64_SHIFT
+#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MIN
+#define ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_EL1_TGRAN64_SUPPORTED_MAX
+#define ID_AA64MMFR0_EL1_TGRAN_2_SHIFT		ID_AA64MMFR0_EL1_TGRAN64_2_SHIFT
+#endif
+
+#define CPACR_EL1_FPEN_EL1EN	(BIT(20)) /* enable EL1 access */
+#define CPACR_EL1_FPEN_EL0EN	(BIT(21)) /* enable EL0 access, if EL1EN set */
+
+#define CPACR_EL1_SMEN_EL1EN	(BIT(24)) /* enable EL1 access */
+#define CPACR_EL1_SMEN_EL0EN	(BIT(25)) /* enable EL0 access, if EL1EN set */
+
+#define CPACR_EL1_ZEN_EL1EN	(BIT(16)) /* enable EL1 access */
+#define CPACR_EL1_ZEN_EL0EN	(BIT(17)) /* enable EL0 access, if EL1EN set */
+
+/* GCR_EL1 Definitions */
+#define SYS_GCR_EL1_RRND	(BIT(16))
+#define SYS_GCR_EL1_EXCL_MASK	0xffffUL
+
+#ifdef CONFIG_KASAN_HW_TAGS
+/*
+ * KASAN always uses a whole byte for its tags. With CONFIG_KASAN_HW_TAGS it
+ * only uses tags in the range 0xF0-0xFF, which we map to MTE tags 0x0-0xF.
+ */
+#define __MTE_TAG_MIN		(KASAN_TAG_MIN & 0xf)
+#define __MTE_TAG_MAX		(KASAN_TAG_MAX & 0xf)
+#define __MTE_TAG_INCL		GENMASK(__MTE_TAG_MAX, __MTE_TAG_MIN)
+#define KERNEL_GCR_EL1_EXCL	(SYS_GCR_EL1_EXCL_MASK & ~__MTE_TAG_INCL)
+#else
+#define KERNEL_GCR_EL1_EXCL	SYS_GCR_EL1_EXCL_MASK
+#endif
+
+#define KERNEL_GCR_EL1		(SYS_GCR_EL1_RRND | KERNEL_GCR_EL1_EXCL)
+
+/* RGSR_EL1 Definitions */
+#define SYS_RGSR_EL1_TAG_MASK	0xfUL
+#define SYS_RGSR_EL1_SEED_SHIFT	8
+#define SYS_RGSR_EL1_SEED_MASK	0xffffUL
+
+/* TFSR{,E0}_EL1 bit definitions */
+#define SYS_TFSR_EL1_TF0_SHIFT	0
+#define SYS_TFSR_EL1_TF1_SHIFT	1
+#define SYS_TFSR_EL1_TF0	(UL(1) << SYS_TFSR_EL1_TF0_SHIFT)
+#define SYS_TFSR_EL1_TF1	(UL(1) << SYS_TFSR_EL1_TF1_SHIFT)
+
+/* Safe value for MPIDR_EL1: Bit31:RES1, Bit30:U:0, Bit24:MT:0 */
+#define SYS_MPIDR_SAFE_VAL	(BIT(31))
+
+#define TRFCR_ELx_TS_SHIFT		5
+#define TRFCR_ELx_TS_MASK		((0x3UL) << TRFCR_ELx_TS_SHIFT)
+#define TRFCR_ELx_TS_VIRTUAL		((0x1UL) << TRFCR_ELx_TS_SHIFT)
+#define TRFCR_ELx_TS_GUEST_PHYSICAL	((0x2UL) << TRFCR_ELx_TS_SHIFT)
+#define TRFCR_ELx_TS_PHYSICAL		((0x3UL) << TRFCR_ELx_TS_SHIFT)
+#define TRFCR_EL2_CX			BIT(3)
+#define TRFCR_ELx_ExTRE			BIT(1)
+#define TRFCR_ELx_E0TRE			BIT(0)
+
+/* GIC Hypervisor interface registers */
+/* ICH_MISR_EL2 bit definitions */
+#define ICH_MISR_EOI		(1 << 0)
+#define ICH_MISR_U		(1 << 1)
+
+/* ICH_LR*_EL2 bit definitions */
+#define ICH_LR_VIRTUAL_ID_MASK	((1ULL << 32) - 1)
+
+#define ICH_LR_EOI		(1ULL << 41)
+#define ICH_LR_GROUP		(1ULL << 60)
+#define ICH_LR_HW		(1ULL << 61)
+#define ICH_LR_STATE		(3ULL << 62)
+#define ICH_LR_PENDING_BIT	(1ULL << 62)
+#define ICH_LR_ACTIVE_BIT	(1ULL << 63)
+#define ICH_LR_PHYS_ID_SHIFT	32
+#define ICH_LR_PHYS_ID_MASK	(0x3ffULL << ICH_LR_PHYS_ID_SHIFT)
+#define ICH_LR_PRIORITY_SHIFT	48
+#define ICH_LR_PRIORITY_MASK	(0xffULL << ICH_LR_PRIORITY_SHIFT)
+
+/* ICH_HCR_EL2 bit definitions */
+#define ICH_HCR_EN		(1 << 0)
+#define ICH_HCR_UIE		(1 << 1)
+#define ICH_HCR_NPIE		(1 << 3)
+#define ICH_HCR_TC		(1 << 10)
+#define ICH_HCR_TALL0		(1 << 11)
+#define ICH_HCR_TALL1		(1 << 12)
+#define ICH_HCR_TDIR		(1 << 14)
+#define ICH_HCR_EOIcount_SHIFT	27
+#define ICH_HCR_EOIcount_MASK	(0x1f << ICH_HCR_EOIcount_SHIFT)
+
+/* ICH_VMCR_EL2 bit definitions */
+#define ICH_VMCR_ACK_CTL_SHIFT	2
+#define ICH_VMCR_ACK_CTL_MASK	(1 << ICH_VMCR_ACK_CTL_SHIFT)
+#define ICH_VMCR_FIQ_EN_SHIFT	3
+#define ICH_VMCR_FIQ_EN_MASK	(1 << ICH_VMCR_FIQ_EN_SHIFT)
+#define ICH_VMCR_CBPR_SHIFT	4
+#define ICH_VMCR_CBPR_MASK	(1 << ICH_VMCR_CBPR_SHIFT)
+#define ICH_VMCR_EOIM_SHIFT	9
+#define ICH_VMCR_EOIM_MASK	(1 << ICH_VMCR_EOIM_SHIFT)
+#define ICH_VMCR_BPR1_SHIFT	18
+#define ICH_VMCR_BPR1_MASK	(7 << ICH_VMCR_BPR1_SHIFT)
+#define ICH_VMCR_BPR0_SHIFT	21
+#define ICH_VMCR_BPR0_MASK	(7 << ICH_VMCR_BPR0_SHIFT)
+#define ICH_VMCR_PMR_SHIFT	24
+#define ICH_VMCR_PMR_MASK	(0xffUL << ICH_VMCR_PMR_SHIFT)
+#define ICH_VMCR_ENG0_SHIFT	0
+#define ICH_VMCR_ENG0_MASK	(1 << ICH_VMCR_ENG0_SHIFT)
+#define ICH_VMCR_ENG1_SHIFT	1
+#define ICH_VMCR_ENG1_MASK	(1 << ICH_VMCR_ENG1_SHIFT)
+
+/* ICH_VTR_EL2 bit definitions */
+#define ICH_VTR_PRI_BITS_SHIFT	29
+#define ICH_VTR_PRI_BITS_MASK	(7 << ICH_VTR_PRI_BITS_SHIFT)
+#define ICH_VTR_ID_BITS_SHIFT	23
+#define ICH_VTR_ID_BITS_MASK	(7 << ICH_VTR_ID_BITS_SHIFT)
+#define ICH_VTR_SEIS_SHIFT	22
+#define ICH_VTR_SEIS_MASK	(1 << ICH_VTR_SEIS_SHIFT)
+#define ICH_VTR_A3V_SHIFT	21
+#define ICH_VTR_A3V_MASK	(1 << ICH_VTR_A3V_SHIFT)
+#define ICH_VTR_TDS_SHIFT	19
+#define ICH_VTR_TDS_MASK	(1 << ICH_VTR_TDS_SHIFT)
+
+/*
+ * Permission Indirection Extension (PIE) permission encodings.
+ * Encodings with the _O suffix, have overlays applied (Permission Overlay Extension).
+ */
+#define PIE_NONE_O	0x0
+#define PIE_R_O		0x1
+#define PIE_X_O		0x2
+#define PIE_RX_O	0x3
+#define PIE_RW_O	0x5
+#define PIE_RWnX_O	0x6
+#define PIE_RWX_O	0x7
+#define PIE_R		0x8
+#define PIE_GCS		0x9
+#define PIE_RX		0xa
+#define PIE_RW		0xc
+#define PIE_RWX		0xe
+
+#define PIRx_ELx_PERM(idx, perm)	((perm) << ((idx) * 4))
+
+#define ARM64_FEATURE_FIELD_BITS	4
+
+/* Defined for compatibility only, do not add new users. */
+#define ARM64_FEATURE_MASK(x)	(x##_MASK)
+
+#ifdef __ASSEMBLY__
+
+	.macro	mrs_s, rt, sreg
+	 __emit_inst(0xd5200000|(\sreg)|(.L__gpr_num_\rt))
+	.endm
+
+	.macro	msr_s, sreg, rt
+	__emit_inst(0xd5000000|(\sreg)|(.L__gpr_num_\rt))
+	.endm
+
+#else
+
+#include <linux/bitfield.h>
+#include <linux/build_bug.h>
+#include <linux/types.h>
+#include <asm/alternative.h>
+
+#define DEFINE_MRS_S						\
+	__DEFINE_ASM_GPR_NUMS					\
+"	.macro	mrs_s, rt, sreg\n"				\
+	__emit_inst(0xd5200000|(\\sreg)|(.L__gpr_num_\\rt))	\
+"	.endm\n"
+
+#define DEFINE_MSR_S						\
+	__DEFINE_ASM_GPR_NUMS					\
+"	.macro	msr_s, sreg, rt\n"				\
+	__emit_inst(0xd5000000|(\\sreg)|(.L__gpr_num_\\rt))	\
+"	.endm\n"
+
+#define UNDEFINE_MRS_S						\
+"	.purgem	mrs_s\n"
+
+#define UNDEFINE_MSR_S						\
+"	.purgem	msr_s\n"
+
+#define __mrs_s(v, r)						\
+	DEFINE_MRS_S						\
+"	mrs_s " v ", " __stringify(r) "\n"			\
+	UNDEFINE_MRS_S
+
+#define __msr_s(r, v)						\
+	DEFINE_MSR_S						\
+"	msr_s " __stringify(r) ", " v "\n"			\
+	UNDEFINE_MSR_S
+
+/*
+ * Unlike read_cpuid, calls to read_sysreg are never expected to be
+ * optimized away or replaced with synthetic values.
+ */
+#define read_sysreg(r) ({					\
+	u64 __val;						\
+	asm volatile("mrs %0, " __stringify(r) : "=r" (__val));	\
+	__val;							\
+})
+
+/*
+ * The "Z" constraint normally means a zero immediate, but when combined with
+ * the "%x0" template means XZR.
+ */
+#define write_sysreg(v, r) do {					\
+	u64 __val = (u64)(v);					\
+	asm volatile("msr " __stringify(r) ", %x0"		\
+		     : : "rZ" (__val));				\
+} while (0)
+
+/*
+ * For registers without architectural names, or simply unsupported by
+ * GAS.
+ *
+ * __check_r forces warnings to be generated by the compiler when
+ * evaluating r which wouldn't normally happen due to being passed to
+ * the assembler via __stringify(r).
+ */
+#define read_sysreg_s(r) ({						\
+	u64 __val;							\
+	u32 __maybe_unused __check_r = (u32)(r);			\
+	asm volatile(__mrs_s("%0", r) : "=r" (__val));			\
+	__val;								\
+})
+
+#define write_sysreg_s(v, r) do {					\
+	u64 __val = (u64)(v);						\
+	u32 __maybe_unused __check_r = (u32)(r);			\
+	asm volatile(__msr_s(r, "%x0") : : "rZ" (__val));		\
+} while (0)
+
+/*
+ * Modify bits in a sysreg. Bits in the clear mask are zeroed, then bits in the
+ * set mask are set. Other bits are left as-is.
+ */
+#define sysreg_clear_set(sysreg, clear, set) do {			\
+	u64 __scs_val = read_sysreg(sysreg);				\
+	u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set);		\
+	if (__scs_new != __scs_val)					\
+		write_sysreg(__scs_new, sysreg);			\
+} while (0)
+
+#define sysreg_clear_set_s(sysreg, clear, set) do {			\
+	u64 __scs_val = read_sysreg_s(sysreg);				\
+	u64 __scs_new = (__scs_val & ~(u64)(clear)) | (set);		\
+	if (__scs_new != __scs_val)					\
+		write_sysreg_s(__scs_new, sysreg);			\
+} while (0)
+
+#define read_sysreg_par() ({						\
+	u64 par;							\
+	asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412));	\
+	par = read_sysreg(par_el1);					\
+	asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412));	\
+	par;								\
+})
+
+#define SYS_FIELD_GET(reg, field, val)		\
+		 FIELD_GET(reg##_##field##_MASK, val)
+
+#define SYS_FIELD_PREP(reg, field, val)		\
+		 FIELD_PREP(reg##_##field##_MASK, val)
+
+#define SYS_FIELD_PREP_ENUM(reg, field, val)		\
+		 FIELD_PREP(reg##_##field##_MASK, reg##_##field##_##val)
+
+#endif
+
+#endif	/* __ASM_SYSREG_H */
diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
new file mode 100644
index 000000000..c34344256
--- /dev/null
+++ b/arch/arm64/include/asm/system_misc.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/system_misc.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_SYSTEM_MISC_H
+#define __ASM_SYSTEM_MISC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/irqflags.h>
+#include <linux/signal.h>
+#include <linux/ratelimit.h>
+#include <linux/reboot.h>
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, long err);
+
+struct siginfo;
+void arm64_notify_die(const char *str, struct pt_regs *regs,
+		      int signo, int sicode, unsigned long far,
+		      unsigned long err);
+
+void hook_debug_fault_code(int nr, int (*fn)(unsigned long, unsigned long,
+					     struct pt_regs *),
+			   int sig, int code, const char *name);
+
+struct mm_struct;
+extern void __show_regs(struct pt_regs *);
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* __ASM_SYSTEM_MISC_H */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
new file mode 100644
index 000000000..553d1bc55
--- /dev/null
+++ b/arch/arm64/include/asm/thread_info.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/thread_info.h
+ *
+ * Copyright (C) 2002 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_THREAD_INFO_H
+#define __ASM_THREAD_INFO_H
+
+#include <linux/compiler.h>
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+
+#include <asm/memory.h>
+#include <asm/stack_pointer.h>
+#include <asm/types.h>
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+	u64			ttbr0;		/* saved TTBR0_EL1 */
+#endif
+	union {
+		u64		preempt_count;	/* 0 => preemptible, <0 => bug */
+		struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+			u32	need_resched;
+			u32	count;
+#else
+			u32	count;
+			u32	need_resched;
+#endif
+		} preempt;
+	};
+#ifdef CONFIG_SHADOW_CALL_STACK
+	void			*scs_base;
+	void			*scs_sp;
+#endif
+	u32			cpu;
+};
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(tsk->thread.cpu_context.pc))
+#define thread_saved_sp(tsk)	\
+	((unsigned long)(tsk->thread.cpu_context.sp))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)(tsk->thread.cpu_context.fp))
+
+void arch_setup_new_exec(void);
+#define arch_setup_new_exec     arch_setup_new_exec
+
+#endif
+
+#define TIF_SIGPENDING		0	/* signal pending */
+#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
+#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
+#define TIF_FOREIGN_FPSTATE	3	/* CPU's FP state is not current's */
+#define TIF_UPROBE		4	/* uprobe breakpoint or singlestep */
+#define TIF_MTE_ASYNC_FAULT	5	/* MTE Asynchronous Tag Check Fault */
+#define TIF_NOTIFY_SIGNAL	6	/* signal notifications exist */
+#define TIF_SYSCALL_TRACE	8	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	9	/* syscall auditing */
+#define TIF_SYSCALL_TRACEPOINT	10	/* syscall tracepoint for ftrace */
+#define TIF_SECCOMP		11	/* syscall secure computing */
+#define TIF_SYSCALL_EMU		12	/* syscall emulation active */
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
+#define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
+#define TIF_SINGLESTEP		21
+#define TIF_32BIT		22	/* 32bit process */
+#define TIF_SVE			23	/* Scalable Vector Extension in use */
+#define TIF_SVE_VL_INHERIT	24	/* Inherit SVE vl_onexec across exec */
+#define TIF_SSBD		25	/* Wants SSB mitigation */
+#define TIF_TAGGED_ADDR		26	/* Allow tagged user addresses */
+#define TIF_SME			27	/* SME in use */
+#define TIF_SME_VL_INHERIT	28	/* Inherit SME vl_onexec across exec */
+
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_FOREIGN_FPSTATE	(1 << TIF_FOREIGN_FPSTATE)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_32BIT		(1 << TIF_32BIT)
+#define _TIF_SVE		(1 << TIF_SVE)
+#define _TIF_MTE_ASYNC_FAULT	(1 << TIF_MTE_ASYNC_FAULT)
+#define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
+
+#define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
+				 _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
+				 _TIF_UPROBE | _TIF_MTE_ASYNC_FAULT | \
+				 _TIF_NOTIFY_SIGNAL)
+
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \
+				 _TIF_SYSCALL_EMU)
+
+#ifdef CONFIG_SHADOW_CALL_STACK
+#define INIT_SCS							\
+	.scs_base	= init_shadow_call_stack,			\
+	.scs_sp		= init_shadow_call_stack,
+#else
+#define INIT_SCS
+#endif
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.flags		= _TIF_FOREIGN_FPSTATE,				\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
+	INIT_SCS							\
+}
+
+#endif /* __ASM_THREAD_INFO_H */
diff --git a/arch/arm64/include/asm/timex.h b/arch/arm64/include/asm/timex.h
new file mode 100644
index 000000000..cf59ce91b
--- /dev/null
+++ b/arch/arm64/include/asm/timex.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_TIMEX_H
+#define __ASM_TIMEX_H
+
+#include <asm/arch_timer.h>
+
+/*
+ * Use the current timer as a cycle counter since this is what we use for
+ * the delay loop.
+ */
+#define get_cycles()	arch_timer_read_counter()
+
+#include <asm-generic/timex.h>
+
+#endif
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h
new file mode 100644
index 000000000..2c29239d0
--- /dev/null
+++ b/arch/arm64/include/asm/tlb.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/tlb.h
+ *
+ * Copyright (C) 2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_TLB_H
+#define __ASM_TLB_H
+
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+static inline void __tlb_remove_table(void *_table)
+{
+	free_page_and_swap_cache((struct page *)_table);
+}
+
+#define tlb_flush tlb_flush
+static void tlb_flush(struct mmu_gather *tlb);
+
+#include <asm-generic/tlb.h>
+
+/*
+ * get the tlbi levels in arm64.  Default value is 0 if more than one
+ * of cleared_* is set or neither is set.
+ * Arm64 doesn't support p4ds now.
+ */
+static inline int tlb_get_level(struct mmu_gather *tlb)
+{
+	/* The TTL field is only valid for the leaf entry. */
+	if (tlb->freed_tables)
+		return 0;
+
+	if (tlb->cleared_ptes && !(tlb->cleared_pmds ||
+				   tlb->cleared_puds ||
+				   tlb->cleared_p4ds))
+		return 3;
+
+	if (tlb->cleared_pmds && !(tlb->cleared_ptes ||
+				   tlb->cleared_puds ||
+				   tlb->cleared_p4ds))
+		return 2;
+
+	if (tlb->cleared_puds && !(tlb->cleared_ptes ||
+				   tlb->cleared_pmds ||
+				   tlb->cleared_p4ds))
+		return 1;
+
+	return 0;
+}
+
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0);
+	bool last_level = !tlb->freed_tables;
+	unsigned long stride = tlb_get_unmap_size(tlb);
+	int tlb_level = tlb_get_level(tlb);
+
+	/*
+	 * If we're tearing down the address space then we only care about
+	 * invalidating the walk-cache, since the ASID allocator won't
+	 * reallocate our ASID without invalidating the entire TLB.
+	 */
+	if (tlb->fullmm) {
+		if (!last_level)
+			flush_tlb_mm(tlb->mm);
+		return;
+	}
+
+	__flush_tlb_range(&vma, tlb->start, tlb->end, stride,
+			  last_level, tlb_level);
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+				  unsigned long addr)
+{
+	struct ptdesc *ptdesc = page_ptdesc(pte);
+
+	pagetable_pte_dtor(ptdesc);
+	tlb_remove_ptdesc(tlb, ptdesc);
+}
+
+#if CONFIG_PGTABLE_LEVELS > 2
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
+				  unsigned long addr)
+{
+	struct ptdesc *ptdesc = virt_to_ptdesc(pmdp);
+
+	pagetable_pmd_dtor(ptdesc);
+	tlb_remove_ptdesc(tlb, ptdesc);
+}
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 3
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp,
+				  unsigned long addr)
+{
+	tlb_remove_ptdesc(tlb, virt_to_ptdesc(pudp));
+}
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/tlbbatch.h b/arch/arm64/include/asm/tlbbatch.h
new file mode 100644
index 000000000..fedb0b87b
--- /dev/null
+++ b/arch/arm64/include/asm/tlbbatch.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARCH_ARM64_TLBBATCH_H
+#define _ARCH_ARM64_TLBBATCH_H
+
+struct arch_tlbflush_unmap_batch {
+	/*
+	 * For arm64, HW can do tlb shootdown, so we don't
+	 * need to record cpumask for sending IPI
+	 */
+};
+
+#endif /* _ARCH_ARM64_TLBBATCH_H */
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
new file mode 100644
index 000000000..b149cf9f9
--- /dev/null
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -0,0 +1,484 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/tlbflush.h
+ *
+ * Copyright (C) 1999-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_TLBFLUSH_H
+#define __ASM_TLBFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitfield.h>
+#include <linux/mm_types.h>
+#include <linux/sched.h>
+#include <linux/mmu_notifier.h>
+#include <asm/cputype.h>
+#include <asm/mmu.h>
+
+/*
+ * Raw TLBI operations.
+ *
+ * Where necessary, use the __tlbi() macro to avoid asm()
+ * boilerplate. Drivers and most kernel code should use the TLB
+ * management routines in preference to the macro below.
+ *
+ * The macro can be used as __tlbi(op) or __tlbi(op, arg), depending
+ * on whether a particular TLBI operation takes an argument or
+ * not. The macros handles invoking the asm with or without the
+ * register argument as appropriate.
+ */
+#define __TLBI_0(op, arg) asm (ARM64_ASM_PREAMBLE			       \
+			       "tlbi " #op "\n"				       \
+		   ALTERNATIVE("nop\n			nop",		       \
+			       "dsb ish\n		tlbi " #op,	       \
+			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
+			    : : )
+
+#define __TLBI_1(op, arg) asm (ARM64_ASM_PREAMBLE			       \
+			       "tlbi " #op ", %0\n"			       \
+		   ALTERNATIVE("nop\n			nop",		       \
+			       "dsb ish\n		tlbi " #op ", %0",     \
+			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
+			    : : "r" (arg))
+
+#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)
+
+#define __tlbi(op, ...)		__TLBI_N(op, ##__VA_ARGS__, 1, 0)
+
+#define __tlbi_user(op, arg) do {						\
+	if (arm64_kernel_unmapped_at_el0())					\
+		__tlbi(op, (arg) | USER_ASID_FLAG);				\
+} while (0)
+
+/* This macro creates a properly formatted VA operand for the TLBI */
+#define __TLBI_VADDR(addr, asid)				\
+	({							\
+		unsigned long __ta = (addr) >> 12;		\
+		__ta &= GENMASK_ULL(43, 0);			\
+		__ta |= (unsigned long)(asid) << 48;		\
+		__ta;						\
+	})
+
+/*
+ * Get translation granule of the system, which is decided by
+ * PAGE_SIZE.  Used by TTL.
+ *  - 4KB	: 1
+ *  - 16KB	: 2
+ *  - 64KB	: 3
+ */
+#define TLBI_TTL_TG_4K		1
+#define TLBI_TTL_TG_16K		2
+#define TLBI_TTL_TG_64K		3
+
+static inline unsigned long get_trans_granule(void)
+{
+	switch (PAGE_SIZE) {
+	case SZ_4K:
+		return TLBI_TTL_TG_4K;
+	case SZ_16K:
+		return TLBI_TTL_TG_16K;
+	case SZ_64K:
+		return TLBI_TTL_TG_64K;
+	default:
+		return 0;
+	}
+}
+
+/*
+ * Level-based TLBI operations.
+ *
+ * When ARMv8.4-TTL exists, TLBI operations take an additional hint for
+ * the level at which the invalidation must take place. If the level is
+ * wrong, no invalidation may take place. In the case where the level
+ * cannot be easily determined, a 0 value for the level parameter will
+ * perform a non-hinted invalidation.
+ *
+ * For Stage-2 invalidation, use the level values provided to that effect
+ * in asm/stage2_pgtable.h.
+ */
+#define TLBI_TTL_MASK		GENMASK_ULL(47, 44)
+
+#define __tlbi_level(op, addr, level) do {				\
+	u64 arg = addr;							\
+									\
+	if (cpus_have_const_cap(ARM64_HAS_ARMv8_4_TTL) &&		\
+	    level) {							\
+		u64 ttl = level & 3;					\
+		ttl |= get_trans_granule() << 2;			\
+		arg &= ~TLBI_TTL_MASK;					\
+		arg |= FIELD_PREP(TLBI_TTL_MASK, ttl);			\
+	}								\
+									\
+	__tlbi(op, arg);						\
+} while(0)
+
+#define __tlbi_user_level(op, arg, level) do {				\
+	if (arm64_kernel_unmapped_at_el0())				\
+		__tlbi_level(op, (arg | USER_ASID_FLAG), level);	\
+} while (0)
+
+/*
+ * This macro creates a properly formatted VA operand for the TLB RANGE.
+ * The value bit assignments are:
+ *
+ * +----------+------+-------+-------+-------+----------------------+
+ * |   ASID   |  TG  | SCALE |  NUM  |  TTL  |        BADDR         |
+ * +-----------------+-------+-------+-------+----------------------+
+ * |63      48|47  46|45   44|43   39|38   37|36                   0|
+ *
+ * The address range is determined by below formula:
+ * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE)
+ *
+ */
+#define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl)		\
+	({							\
+		unsigned long __ta = (addr) >> PAGE_SHIFT;	\
+		__ta &= GENMASK_ULL(36, 0);			\
+		__ta |= (unsigned long)(ttl) << 37;		\
+		__ta |= (unsigned long)(num) << 39;		\
+		__ta |= (unsigned long)(scale) << 44;		\
+		__ta |= get_trans_granule() << 46;		\
+		__ta |= (unsigned long)(asid) << 48;		\
+		__ta;						\
+	})
+
+/* These macros are used by the TLBI RANGE feature. */
+#define __TLBI_RANGE_PAGES(num, scale)	\
+	((unsigned long)((num) + 1) << (5 * (scale) + 1))
+#define MAX_TLBI_RANGE_PAGES		__TLBI_RANGE_PAGES(31, 3)
+
+/*
+ * Generate 'num' values from -1 to 30 with -1 rejected by the
+ * __flush_tlb_range() loop below.
+ */
+#define TLBI_RANGE_MASK			GENMASK_ULL(4, 0)
+#define __TLBI_RANGE_NUM(pages, scale)	\
+	((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1)
+
+/*
+ *	TLB Invalidation
+ *	================
+ *
+ * 	This header file implements the low-level TLB invalidation routines
+ *	(sometimes referred to as "flushing" in the kernel) for arm64.
+ *
+ *	Every invalidation operation uses the following template:
+ *
+ *	DSB ISHST	// Ensure prior page-table updates have completed
+ *	TLBI ...	// Invalidate the TLB
+ *	DSB ISH		// Ensure the TLB invalidation has completed
+ *      if (invalidated kernel mappings)
+ *		ISB	// Discard any instructions fetched from the old mapping
+ *
+ *
+ *	The following functions form part of the "core" TLB invalidation API,
+ *	as documented in Documentation/core-api/cachetlb.rst:
+ *
+ *	flush_tlb_all()
+ *		Invalidate the entire TLB (kernel + user) on all CPUs
+ *
+ *	flush_tlb_mm(mm)
+ *		Invalidate an entire user address space on all CPUs.
+ *		The 'mm' argument identifies the ASID to invalidate.
+ *
+ *	flush_tlb_range(vma, start, end)
+ *		Invalidate the virtual-address range '[start, end)' on all
+ *		CPUs for the user address space corresponding to 'vma->mm'.
+ *		Note that this operation also invalidates any walk-cache
+ *		entries associated with translations for the specified address
+ *		range.
+ *
+ *	flush_tlb_kernel_range(start, end)
+ *		Same as flush_tlb_range(..., start, end), but applies to
+ * 		kernel mappings rather than a particular user address space.
+ *		Whilst not explicitly documented, this function is used when
+ *		unmapping pages from vmalloc/io space.
+ *
+ *	flush_tlb_page(vma, addr)
+ *		Invalidate a single user mapping for address 'addr' in the
+ *		address space corresponding to 'vma->mm'.  Note that this
+ *		operation only invalidates a single, last-level page-table
+ *		entry and therefore does not affect any walk-caches.
+ *
+ *
+ *	Next, we have some undocumented invalidation routines that you probably
+ *	don't want to call unless you know what you're doing:
+ *
+ *	local_flush_tlb_all()
+ *		Same as flush_tlb_all(), but only applies to the calling CPU.
+ *
+ *	__flush_tlb_kernel_pgtable(addr)
+ *		Invalidate a single kernel mapping for address 'addr' on all
+ *		CPUs, ensuring that any walk-cache entries associated with the
+ *		translation are also invalidated.
+ *
+ *	__flush_tlb_range(vma, start, end, stride, last_level)
+ *		Invalidate the virtual-address range '[start, end)' on all
+ *		CPUs for the user address space corresponding to 'vma->mm'.
+ *		The invalidation operations are issued at a granularity
+ *		determined by 'stride' and only affect any walk-cache entries
+ *		if 'last_level' is equal to false.
+ *
+ *
+ *	Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented
+ *	on top of these routines, since that is our interface to the mmu_gather
+ *	API as used by munmap() and friends.
+ */
+static inline void local_flush_tlb_all(void)
+{
+	dsb(nshst);
+	__tlbi(vmalle1);
+	dsb(nsh);
+	isb();
+}
+
+static inline void flush_tlb_all(void)
+{
+	dsb(ishst);
+	__tlbi(vmalle1is);
+	dsb(ish);
+	isb();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	unsigned long asid;
+
+	dsb(ishst);
+	asid = __TLBI_VADDR(0, ASID(mm));
+	__tlbi(aside1is, asid);
+	__tlbi_user(aside1is, asid);
+	dsb(ish);
+	mmu_notifier_arch_invalidate_secondary_tlbs(mm, 0, -1UL);
+}
+
+static inline void __flush_tlb_page_nosync(struct mm_struct *mm,
+					   unsigned long uaddr)
+{
+	unsigned long addr;
+
+	dsb(ishst);
+	addr = __TLBI_VADDR(uaddr, ASID(mm));
+	__tlbi(vale1is, addr);
+	__tlbi_user(vale1is, addr);
+	mmu_notifier_arch_invalidate_secondary_tlbs(mm, uaddr & PAGE_MASK,
+						(uaddr & PAGE_MASK) + PAGE_SIZE);
+}
+
+static inline void flush_tlb_page_nosync(struct vm_area_struct *vma,
+					 unsigned long uaddr)
+{
+	return __flush_tlb_page_nosync(vma->vm_mm, uaddr);
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long uaddr)
+{
+	flush_tlb_page_nosync(vma, uaddr);
+	dsb(ish);
+}
+
+static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm)
+{
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+	/*
+	 * TLB flush deferral is not required on systems which are affected by
+	 * ARM64_WORKAROUND_REPEAT_TLBI, as __tlbi()/__tlbi_user() implementation
+	 * will have two consecutive TLBI instructions with a dsb(ish) in between
+	 * defeating the purpose (i.e save overall 'dsb ish' cost).
+	 */
+	if (unlikely(cpus_have_const_cap(ARM64_WORKAROUND_REPEAT_TLBI)))
+		return false;
+#endif
+	return true;
+}
+
+static inline void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch,
+					     struct mm_struct *mm,
+					     unsigned long uaddr)
+{
+	__flush_tlb_page_nosync(mm, uaddr);
+}
+
+/*
+ * If mprotect/munmap/etc occurs during TLB batched flushing, we need to
+ * synchronise all the TLBI issued with a DSB to avoid the race mentioned in
+ * flush_tlb_batched_pending().
+ */
+static inline void arch_flush_tlb_batched_pending(struct mm_struct *mm)
+{
+	dsb(ish);
+}
+
+/*
+ * To support TLB batched flush for multiple pages unmapping, we only send
+ * the TLBI for each page in arch_tlbbatch_add_pending() and wait for the
+ * completion at the end in arch_tlbbatch_flush(). Since we've already issued
+ * TLBI for each page so only a DSB is needed to synchronise its effect on the
+ * other CPUs.
+ *
+ * This will save the time waiting on DSB comparing issuing a TLBI;DSB sequence
+ * for each page.
+ */
+static inline void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
+{
+	dsb(ish);
+}
+
+/*
+ * This is meant to avoid soft lock-ups on large TLB flushing ranges and not
+ * necessarily a performance improvement.
+ */
+#define MAX_TLBI_OPS	PTRS_PER_PTE
+
+/*
+ * __flush_tlb_range_op - Perform TLBI operation upon a range
+ *
+ * @op:	TLBI instruction that operates on a range (has 'r' prefix)
+ * @start:	The start address of the range
+ * @pages:	Range as the number of pages from 'start'
+ * @stride:	Flush granularity
+ * @asid:	The ASID of the task (0 for IPA instructions)
+ * @tlb_level:	Translation Table level hint, if known
+ * @tlbi_user:	If 'true', call an additional __tlbi_user()
+ *              (typically for user ASIDs). 'flase' for IPA instructions
+ *
+ * When the CPU does not support TLB range operations, flush the TLB
+ * entries one by one at the granularity of 'stride'. If the TLB
+ * range ops are supported, then:
+ *
+ * 1. If 'pages' is odd, flush the first page through non-range
+ *    operations;
+ *
+ * 2. For remaining pages: the minimum range granularity is decided
+ *    by 'scale', so multiple range TLBI operations may be required.
+ *    Start from scale = 0, flush the corresponding number of pages
+ *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
+ *    until no pages left.
+ *
+ * Note that certain ranges can be represented by either num = 31 and
+ * scale or num = 0 and scale + 1. The loop below favours the latter
+ * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
+ */
+#define __flush_tlb_range_op(op, start, pages, stride,			\
+				asid, tlb_level, tlbi_user)		\
+do {									\
+	int num = 0;							\
+	int scale = 0;							\
+	unsigned long addr;						\
+									\
+	while (pages > 0) {						\
+		if (!system_supports_tlb_range() ||			\
+		    pages % 2 == 1) {					\
+			addr = __TLBI_VADDR(start, asid);		\
+			__tlbi_level(op, addr, tlb_level);		\
+			if (tlbi_user)					\
+				__tlbi_user_level(op, addr, tlb_level);	\
+			start += stride;				\
+			pages -= stride >> PAGE_SHIFT;			\
+			continue;					\
+		}							\
+									\
+		num = __TLBI_RANGE_NUM(pages, scale);			\
+		if (num >= 0) {						\
+			addr = __TLBI_VADDR_RANGE(start, asid, scale,	\
+						  num, tlb_level);	\
+			__tlbi(r##op, addr);				\
+			if (tlbi_user)					\
+				__tlbi_user(r##op, addr);		\
+			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
+			pages -= __TLBI_RANGE_PAGES(num, scale);	\
+		}							\
+		scale++;						\
+	}								\
+} while (0)
+
+#define __flush_s2_tlb_range_op(op, start, pages, stride, tlb_level) \
+	__flush_tlb_range_op(op, start, pages, stride, 0, tlb_level, false)
+
+static inline void __flush_tlb_range(struct vm_area_struct *vma,
+				     unsigned long start, unsigned long end,
+				     unsigned long stride, bool last_level,
+				     int tlb_level)
+{
+	unsigned long asid, pages;
+
+	start = round_down(start, stride);
+	end = round_up(end, stride);
+	pages = (end - start) >> PAGE_SHIFT;
+
+	/*
+	 * When not uses TLB range ops, we can handle up to
+	 * (MAX_TLBI_OPS - 1) pages;
+	 * When uses TLB range ops, we can handle up to
+	 * (MAX_TLBI_RANGE_PAGES - 1) pages.
+	 */
+	if ((!system_supports_tlb_range() &&
+	     (end - start) >= (MAX_TLBI_OPS * stride)) ||
+	    pages >= MAX_TLBI_RANGE_PAGES) {
+		flush_tlb_mm(vma->vm_mm);
+		return;
+	}
+
+	dsb(ishst);
+	asid = ASID(vma->vm_mm);
+
+	if (last_level)
+		__flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true);
+	else
+		__flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true);
+
+	dsb(ish);
+	mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, start, end);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	/*
+	 * We cannot use leaf-only invalidation here, since we may be invalidating
+	 * table entries as part of collapsing hugepages or moving page tables.
+	 * Set the tlb_level to 0 because we can not get enough information here.
+	 */
+	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	if ((end - start) > (MAX_TLBI_OPS * PAGE_SIZE)) {
+		flush_tlb_all();
+		return;
+	}
+
+	start = __TLBI_VADDR(start, 0);
+	end = __TLBI_VADDR(end, 0);
+
+	dsb(ishst);
+	for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12))
+		__tlbi(vaale1is, addr);
+	dsb(ish);
+	isb();
+}
+
+/*
+ * Used to invalidate the TLB (walk caches) corresponding to intermediate page
+ * table levels (pgd/pud/pmd).
+ */
+static inline void __flush_tlb_kernel_pgtable(unsigned long kaddr)
+{
+	unsigned long addr = __TLBI_VADDR(kaddr, 0);
+
+	dsb(ishst);
+	__tlbi(vaae1is, addr);
+	dsb(ish);
+	isb();
+}
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
new file mode 100644
index 000000000..9fab663dd
--- /dev/null
+++ b/arch/arm64/include/asm/topology.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_TOPOLOGY_H
+#define __ASM_TOPOLOGY_H
+
+#include <linux/cpumask.h>
+
+#ifdef CONFIG_NUMA
+
+struct pci_bus;
+int pcibus_to_node(struct pci_bus *bus);
+#define cpumask_of_pcibus(bus)	(pcibus_to_node(bus) == -1 ?		\
+				 cpu_all_mask :				\
+				 cpumask_of_node(pcibus_to_node(bus)))
+
+#endif /* CONFIG_NUMA */
+
+#include <linux/arch_topology.h>
+
+void update_freq_counters_refs(void);
+
+/* Replace task scheduler's default frequency-invariant accounting */
+#define arch_scale_freq_tick topology_scale_freq_tick
+#define arch_set_freq_scale topology_set_freq_scale
+#define arch_scale_freq_capacity topology_get_freq_scale
+#define arch_scale_freq_invariant topology_scale_freq_invariant
+
+#ifdef CONFIG_ACPI_CPPC_LIB
+#define arch_init_invariance_cppc topology_init_cpu_capacity_cppc
+#endif
+
+/* Replace task scheduler's default cpu-invariant accounting */
+#define arch_scale_cpu_capacity topology_get_cpu_scale
+
+/* Enable topology flag updates */
+#define arch_update_cpu_topology topology_update_cpu_topology
+
+/* Replace task scheduler's default thermal pressure API */
+#define arch_scale_thermal_pressure topology_get_thermal_pressure
+#define arch_update_thermal_pressure	topology_update_thermal_pressure
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm64/include/asm/trans_pgd.h b/arch/arm64/include/asm/trans_pgd.h
new file mode 100644
index 000000000..033d400a4
--- /dev/null
+++ b/arch/arm64/include/asm/trans_pgd.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * Copyright (c) 2021, Microsoft Corporation.
+ * Pasha Tatashin <pasha.tatashin@soleen.com>
+ */
+
+#ifndef _ASM_TRANS_TABLE_H
+#define _ASM_TRANS_TABLE_H
+
+#include <linux/bits.h>
+#include <linux/types.h>
+#include <asm/pgtable-types.h>
+
+/*
+ * trans_alloc_page
+ *	- Allocator that should return exactly one zeroed page, if this
+ *	  allocator fails, trans_pgd_create_copy() and trans_pgd_idmap_page()
+ *	  return -ENOMEM error.
+ *
+ * trans_alloc_arg
+ *	- Passed to trans_alloc_page as an argument
+ */
+
+struct trans_pgd_info {
+	void * (*trans_alloc_page)(void *arg);
+	void *trans_alloc_arg;
+};
+
+int trans_pgd_create_copy(struct trans_pgd_info *info, pgd_t **trans_pgd,
+			  unsigned long start, unsigned long end);
+
+int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
+			 unsigned long *t0sz, void *page);
+
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors);
+
+extern char trans_pgd_stub_vectors[];
+
+#endif /* _ASM_TRANS_TABLE_H */
diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h
new file mode 100644
index 000000000..d66dfb3a7
--- /dev/null
+++ b/arch/arm64/include/asm/traps.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/traps.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_TRAP_H
+#define __ASM_TRAP_H
+
+#include <linux/list.h>
+#include <asm/esr.h>
+#include <asm/sections.h>
+
+struct pt_regs;
+
+#ifdef CONFIG_ARMV8_DEPRECATED
+bool try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn);
+#else
+static inline bool
+try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn)
+{
+	return false;
+}
+#endif /* CONFIG_ARMV8_DEPRECATED */
+
+void force_signal_inject(int signal, int code, unsigned long address, unsigned long err);
+void arm64_notify_segfault(unsigned long addr);
+void arm64_force_sig_fault(int signo, int code, unsigned long far, const char *str);
+void arm64_force_sig_mceerr(int code, unsigned long far, short lsb, const char *str);
+void arm64_force_sig_ptrace_errno_trap(int errno, unsigned long far, const char *str);
+
+int early_brk64(unsigned long addr, unsigned long esr, struct pt_regs *regs);
+
+/*
+ * Move regs->pc to next instruction and do necessary setup before it
+ * is executed.
+ */
+void arm64_skip_faulting_instruction(struct pt_regs *regs, unsigned long size);
+
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+	return ptr >= (unsigned long)&__irqentry_text_start &&
+	       ptr < (unsigned long)&__irqentry_text_end;
+}
+
+static inline int in_entry_text(unsigned long ptr)
+{
+	return ptr >= (unsigned long)&__entry_text_start &&
+	       ptr < (unsigned long)&__entry_text_end;
+}
+
+/*
+ * CPUs with the RAS extensions have an Implementation-Defined-Syndrome bit
+ * to indicate whether this ESR has a RAS encoding. CPUs without this feature
+ * have a ISS-Valid bit in the same position.
+ * If this bit is set, we know its not a RAS SError.
+ * If its clear, we need to know if the CPU supports RAS. Uncategorized RAS
+ * errors share the same encoding as an all-zeros encoding from a CPU that
+ * doesn't support RAS.
+ */
+static inline bool arm64_is_ras_serror(unsigned long esr)
+{
+	WARN_ON(preemptible());
+
+	if (esr & ESR_ELx_IDS)
+		return false;
+
+	if (this_cpu_has_cap(ARM64_HAS_RAS_EXTN))
+		return true;
+	else
+		return false;
+}
+
+/*
+ * Return the AET bits from a RAS SError's ESR.
+ *
+ * It is implementation defined whether Uncategorized errors are containable.
+ * We treat them as Uncontainable.
+ * Non-RAS SError's are reported as Uncontained/Uncategorized.
+ */
+static inline unsigned long arm64_ras_serror_get_severity(unsigned long esr)
+{
+	unsigned long aet = esr & ESR_ELx_AET;
+
+	if (!arm64_is_ras_serror(esr)) {
+		/* Not a RAS error, we can't interpret the ESR. */
+		return ESR_ELx_AET_UC;
+	}
+
+	/*
+	 * AET is RES0 if 'the value returned in the DFSC field is not
+	 * [ESR_ELx_FSC_SERROR]'
+	 */
+	if ((esr & ESR_ELx_FSC) != ESR_ELx_FSC_SERROR) {
+		/* No severity information : Uncategorized */
+		return ESR_ELx_AET_UC;
+	}
+
+	return aet;
+}
+
+bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr);
+void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr);
+#endif
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
new file mode 100644
index 000000000..14be5000c
--- /dev/null
+++ b/arch/arm64/include/asm/uaccess.h
@@ -0,0 +1,428 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/uaccess.h
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef __ASM_UACCESS_H
+#define __ASM_UACCESS_H
+
+#include <asm/alternative.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/sysreg.h>
+
+/*
+ * User space memory access functions
+ */
+#include <linux/bitops.h>
+#include <linux/kasan-checks.h>
+#include <linux/string.h>
+
+#include <asm/asm-extable.h>
+#include <asm/cpufeature.h>
+#include <asm/mmu.h>
+#include <asm/mte.h>
+#include <asm/ptrace.h>
+#include <asm/memory.h>
+#include <asm/extable.h>
+
+static inline int __access_ok(const void __user *ptr, unsigned long size);
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 1 if the range is valid, 0 otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u65)addr + (u65)size <= (u65)TASK_SIZE_MAX
+ */
+static inline int access_ok(const void __user *addr, unsigned long size)
+{
+	/*
+	 * Asynchronous I/O running in a kernel thread does not have the
+	 * TIF_TAGGED_ADDR flag of the process owning the mm, so always untag
+	 * the user address before checking.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_TAGGED_ADDR_ABI) &&
+	    (current->flags & PF_KTHREAD || test_thread_flag(TIF_TAGGED_ADDR)))
+		addr = untagged_addr(addr);
+
+	return likely(__access_ok(addr, size));
+}
+#define access_ok access_ok
+
+#include <asm-generic/access_ok.h>
+
+/*
+ * User access enabling/disabling.
+ */
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+static inline void __uaccess_ttbr0_disable(void)
+{
+	unsigned long flags, ttbr;
+
+	local_irq_save(flags);
+	ttbr = read_sysreg(ttbr1_el1);
+	ttbr &= ~TTBR_ASID_MASK;
+	/* reserved_pg_dir placed before swapper_pg_dir */
+	write_sysreg(ttbr - RESERVED_SWAPPER_OFFSET, ttbr0_el1);
+	/* Set reserved ASID */
+	write_sysreg(ttbr, ttbr1_el1);
+	isb();
+	local_irq_restore(flags);
+}
+
+static inline void __uaccess_ttbr0_enable(void)
+{
+	unsigned long flags, ttbr0, ttbr1;
+
+	/*
+	 * Disable interrupts to avoid preemption between reading the 'ttbr0'
+	 * variable and the MSR. A context switch could trigger an ASID
+	 * roll-over and an update of 'ttbr0'.
+	 */
+	local_irq_save(flags);
+	ttbr0 = READ_ONCE(current_thread_info()->ttbr0);
+
+	/* Restore active ASID */
+	ttbr1 = read_sysreg(ttbr1_el1);
+	ttbr1 &= ~TTBR_ASID_MASK;		/* safety measure */
+	ttbr1 |= ttbr0 & TTBR_ASID_MASK;
+	write_sysreg(ttbr1, ttbr1_el1);
+
+	/* Restore user page table */
+	write_sysreg(ttbr0, ttbr0_el1);
+	isb();
+	local_irq_restore(flags);
+}
+
+static inline bool uaccess_ttbr0_disable(void)
+{
+	if (!system_uses_ttbr0_pan())
+		return false;
+	__uaccess_ttbr0_disable();
+	return true;
+}
+
+static inline bool uaccess_ttbr0_enable(void)
+{
+	if (!system_uses_ttbr0_pan())
+		return false;
+	__uaccess_ttbr0_enable();
+	return true;
+}
+#else
+static inline bool uaccess_ttbr0_disable(void)
+{
+	return false;
+}
+
+static inline bool uaccess_ttbr0_enable(void)
+{
+	return false;
+}
+#endif
+
+static inline void __uaccess_disable_hw_pan(void)
+{
+	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN,
+			CONFIG_ARM64_PAN));
+}
+
+static inline void __uaccess_enable_hw_pan(void)
+{
+	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN,
+			CONFIG_ARM64_PAN));
+}
+
+static inline void uaccess_disable_privileged(void)
+{
+	mte_disable_tco();
+
+	if (uaccess_ttbr0_disable())
+		return;
+
+	__uaccess_enable_hw_pan();
+}
+
+static inline void uaccess_enable_privileged(void)
+{
+	mte_enable_tco();
+
+	if (uaccess_ttbr0_enable())
+		return;
+
+	__uaccess_disable_hw_pan();
+}
+
+/*
+ * Sanitize a uaccess pointer such that it cannot reach any kernel address.
+ *
+ * Clearing bit 55 ensures the pointer cannot address any portion of the TTBR1
+ * address range (i.e. any kernel address), and either the pointer falls within
+ * the TTBR0 address range or must cause a fault.
+ */
+#define uaccess_mask_ptr(ptr) (__typeof__(ptr))__uaccess_mask_ptr(ptr)
+static inline void __user *__uaccess_mask_ptr(const void __user *ptr)
+{
+	void __user *safe_ptr;
+
+	asm volatile(
+	"	bic	%0, %1, %2\n"
+	: "=r" (safe_ptr)
+	: "r" (ptr),
+	  "i" (BIT(55))
+	);
+
+	return safe_ptr;
+}
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the address
+ * space - it must have been done previously with a separate "access_ok()"
+ * call.
+ *
+ * The "__xxx_error" versions set the third argument to -EFAULT if an error
+ * occurs, and leave it unchanged on success.
+ */
+#define __get_mem_asm(load, reg, x, addr, err, type)			\
+	asm volatile(							\
+	"1:	" load "	" reg "1, [%2]\n"			\
+	"2:\n"								\
+	_ASM_EXTABLE_##type##ACCESS_ERR_ZERO(1b, 2b, %w0, %w1)		\
+	: "+r" (err), "=r" (x)						\
+	: "r" (addr))
+
+#define __raw_get_mem(ldr, x, ptr, err, type)					\
+do {										\
+	unsigned long __gu_val;							\
+	switch (sizeof(*(ptr))) {						\
+	case 1:									\
+		__get_mem_asm(ldr "b", "%w", __gu_val, (ptr), (err), type);	\
+		break;								\
+	case 2:									\
+		__get_mem_asm(ldr "h", "%w", __gu_val, (ptr), (err), type);	\
+		break;								\
+	case 4:									\
+		__get_mem_asm(ldr, "%w", __gu_val, (ptr), (err), type);		\
+		break;								\
+	case 8:									\
+		__get_mem_asm(ldr, "%x",  __gu_val, (ptr), (err), type);	\
+		break;								\
+	default:								\
+		BUILD_BUG();							\
+	}									\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;				\
+} while (0)
+
+/*
+ * We must not call into the scheduler between uaccess_ttbr0_enable() and
+ * uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
+ * we must evaluate these outside of the critical section.
+ */
+#define __raw_get_user(x, ptr, err)					\
+do {									\
+	__typeof__(*(ptr)) __user *__rgu_ptr = (ptr);			\
+	__typeof__(x) __rgu_val;					\
+	__chk_user_ptr(ptr);						\
+									\
+	uaccess_ttbr0_enable();						\
+	__raw_get_mem("ldtr", __rgu_val, __rgu_ptr, err, U);		\
+	uaccess_ttbr0_disable();					\
+									\
+	(x) = __rgu_val;						\
+} while (0)
+
+#define __get_user_error(x, ptr, err)					\
+do {									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
+	might_fault();							\
+	if (access_ok(__p, sizeof(*__p))) {				\
+		__p = uaccess_mask_ptr(__p);				\
+		__raw_get_user((x), __p, (err));			\
+	} else {							\
+		(x) = (__force __typeof__(x))0; (err) = -EFAULT;	\
+	}								\
+} while (0)
+
+#define __get_user(x, ptr)						\
+({									\
+	int __gu_err = 0;						\
+	__get_user_error((x), (ptr), __gu_err);				\
+	__gu_err;							\
+})
+
+#define get_user	__get_user
+
+/*
+ * We must not call into the scheduler between __mte_enable_tco_async() and
+ * __mte_disable_tco_async(). As `dst` and `src` may contain blocking
+ * functions, we must evaluate these outside of the critical section.
+ */
+#define __get_kernel_nofault(dst, src, type, err_label)			\
+do {									\
+	__typeof__(dst) __gkn_dst = (dst);				\
+	__typeof__(src) __gkn_src = (src);				\
+	int __gkn_err = 0;						\
+									\
+	__mte_enable_tco_async();					\
+	__raw_get_mem("ldr", *((type *)(__gkn_dst)),			\
+		      (__force type *)(__gkn_src), __gkn_err, K);	\
+	__mte_disable_tco_async();					\
+									\
+	if (unlikely(__gkn_err))					\
+		goto err_label;						\
+} while (0)
+
+#define __put_mem_asm(store, reg, x, addr, err, type)			\
+	asm volatile(							\
+	"1:	" store "	" reg "1, [%2]\n"			\
+	"2:\n"								\
+	_ASM_EXTABLE_##type##ACCESS_ERR(1b, 2b, %w0)			\
+	: "+r" (err)							\
+	: "rZ" (x), "r" (addr))
+
+#define __raw_put_mem(str, x, ptr, err, type)					\
+do {										\
+	__typeof__(*(ptr)) __pu_val = (x);					\
+	switch (sizeof(*(ptr))) {						\
+	case 1:									\
+		__put_mem_asm(str "b", "%w", __pu_val, (ptr), (err), type);	\
+		break;								\
+	case 2:									\
+		__put_mem_asm(str "h", "%w", __pu_val, (ptr), (err), type);	\
+		break;								\
+	case 4:									\
+		__put_mem_asm(str, "%w", __pu_val, (ptr), (err), type);		\
+		break;								\
+	case 8:									\
+		__put_mem_asm(str, "%x", __pu_val, (ptr), (err), type);		\
+		break;								\
+	default:								\
+		BUILD_BUG();							\
+	}									\
+} while (0)
+
+/*
+ * We must not call into the scheduler between uaccess_ttbr0_enable() and
+ * uaccess_ttbr0_disable(). As `x` and `ptr` could contain blocking functions,
+ * we must evaluate these outside of the critical section.
+ */
+#define __raw_put_user(x, ptr, err)					\
+do {									\
+	__typeof__(*(ptr)) __user *__rpu_ptr = (ptr);			\
+	__typeof__(*(ptr)) __rpu_val = (x);				\
+	__chk_user_ptr(__rpu_ptr);					\
+									\
+	uaccess_ttbr0_enable();						\
+	__raw_put_mem("sttr", __rpu_val, __rpu_ptr, err, U);		\
+	uaccess_ttbr0_disable();					\
+} while (0)
+
+#define __put_user_error(x, ptr, err)					\
+do {									\
+	__typeof__(*(ptr)) __user *__p = (ptr);				\
+	might_fault();							\
+	if (access_ok(__p, sizeof(*__p))) {				\
+		__p = uaccess_mask_ptr(__p);				\
+		__raw_put_user((x), __p, (err));			\
+	} else	{							\
+		(err) = -EFAULT;					\
+	}								\
+} while (0)
+
+#define __put_user(x, ptr)						\
+({									\
+	int __pu_err = 0;						\
+	__put_user_error((x), (ptr), __pu_err);				\
+	__pu_err;							\
+})
+
+#define put_user	__put_user
+
+/*
+ * We must not call into the scheduler between __mte_enable_tco_async() and
+ * __mte_disable_tco_async(). As `dst` and `src` may contain blocking
+ * functions, we must evaluate these outside of the critical section.
+ */
+#define __put_kernel_nofault(dst, src, type, err_label)			\
+do {									\
+	__typeof__(dst) __pkn_dst = (dst);				\
+	__typeof__(src) __pkn_src = (src);				\
+	int __pkn_err = 0;						\
+									\
+	__mte_enable_tco_async();					\
+	__raw_put_mem("str", *((type *)(__pkn_src)),			\
+		      (__force type *)(__pkn_dst), __pkn_err, K);	\
+	__mte_disable_tco_async();					\
+									\
+	if (unlikely(__pkn_err))					\
+		goto err_label;						\
+} while(0)
+
+extern unsigned long __must_check __arch_copy_from_user(void *to, const void __user *from, unsigned long n);
+#define raw_copy_from_user(to, from, n)					\
+({									\
+	unsigned long __acfu_ret;					\
+	uaccess_ttbr0_enable();						\
+	__acfu_ret = __arch_copy_from_user((to),			\
+				      __uaccess_mask_ptr(from), (n));	\
+	uaccess_ttbr0_disable();					\
+	__acfu_ret;							\
+})
+
+extern unsigned long __must_check __arch_copy_to_user(void __user *to, const void *from, unsigned long n);
+#define raw_copy_to_user(to, from, n)					\
+({									\
+	unsigned long __actu_ret;					\
+	uaccess_ttbr0_enable();						\
+	__actu_ret = __arch_copy_to_user(__uaccess_mask_ptr(to),	\
+				    (from), (n));			\
+	uaccess_ttbr0_disable();					\
+	__actu_ret;							\
+})
+
+#define INLINE_COPY_TO_USER
+#define INLINE_COPY_FROM_USER
+
+extern unsigned long __must_check __arch_clear_user(void __user *to, unsigned long n);
+static inline unsigned long __must_check __clear_user(void __user *to, unsigned long n)
+{
+	if (access_ok(to, n)) {
+		uaccess_ttbr0_enable();
+		n = __arch_clear_user(__uaccess_mask_ptr(to), n);
+		uaccess_ttbr0_disable();
+	}
+	return n;
+}
+#define clear_user	__clear_user
+
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strnlen_user(const char __user *str, long n);
+
+#ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
+extern unsigned long __must_check __copy_user_flushcache(void *to, const void __user *from, unsigned long n);
+
+static inline int __copy_from_user_flushcache(void *dst, const void __user *src, unsigned size)
+{
+	kasan_check_write(dst, size);
+	return __copy_user_flushcache(dst, __uaccess_mask_ptr(src), size);
+}
+#endif
+
+#ifdef CONFIG_ARCH_HAS_SUBPAGE_FAULTS
+
+/*
+ * Return 0 on success, the number of bytes not probed otherwise.
+ */
+static inline size_t probe_subpage_writeable(const char __user *uaddr,
+					     size_t size)
+{
+	if (!system_supports_mte())
+		return 0;
+	return mte_probe_user_range(uaddr, size);
+}
+
+#endif /* CONFIG_ARCH_HAS_SUBPAGE_FAULTS */
+
+#endif /* __ASM_UACCESS_H */
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
new file mode 100644
index 000000000..bd77253b6
--- /dev/null
+++ b/arch/arm64/include/asm/unistd.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifdef CONFIG_COMPAT
+#define __ARCH_WANT_COMPAT_STAT
+#define __ARCH_WANT_COMPAT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_COMPAT_SYS_SENDFILE
+#define __ARCH_WANT_SYS_UTIME32
+#define __ARCH_WANT_SYS_FORK
+#define __ARCH_WANT_SYS_VFORK
+
+/*
+ * Compat syscall numbers used by the AArch64 kernel.
+ */
+#define __NR_compat_restart_syscall	0
+#define __NR_compat_exit		1
+#define __NR_compat_read		3
+#define __NR_compat_write		4
+#define __NR_compat_gettimeofday	78
+#define __NR_compat_sigreturn		119
+#define __NR_compat_rt_sigreturn	173
+#define __NR_compat_clock_gettime	263
+#define __NR_compat_clock_getres	264
+#define __NR_compat_clock_gettime64	403
+#define __NR_compat_clock_getres_time64	406
+
+/*
+ * The following SVCs are ARM private.
+ */
+#define __ARM_NR_COMPAT_BASE		0x0f0000
+#define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE + 2)
+#define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE + 5)
+#define __ARM_NR_COMPAT_END		(__ARM_NR_COMPAT_BASE + 0x800)
+
+#define __NR_compat_syscalls		453
+#endif
+
+#define __ARCH_WANT_SYS_CLONE
+
+#ifndef __COMPAT_SYSCALL_NR
+#include <uapi/asm/unistd.h>
+#endif
+
+#define NR_syscalls (__NR_syscalls)
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
new file mode 100644
index 000000000..78b68311e
--- /dev/null
+++ b/arch/arm64/include/asm/unistd32.h
@@ -0,0 +1,918 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AArch32 (compat) system call definitions.
+ *
+ * Copyright (C) 2001-2005 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __SYSCALL
+#define __SYSCALL(x, y)
+#endif
+
+#define __NR_restart_syscall 0
+__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
+#define __NR_exit 1
+__SYSCALL(__NR_exit, sys_exit)
+#define __NR_fork 2
+__SYSCALL(__NR_fork, sys_fork)
+#define __NR_read 3
+__SYSCALL(__NR_read, sys_read)
+#define __NR_write 4
+__SYSCALL(__NR_write, sys_write)
+#define __NR_open 5
+__SYSCALL(__NR_open, compat_sys_open)
+#define __NR_close 6
+__SYSCALL(__NR_close, sys_close)
+			/* 7 was sys_waitpid */
+__SYSCALL(7, sys_ni_syscall)
+#define __NR_creat 8
+__SYSCALL(__NR_creat, sys_creat)
+#define __NR_link 9
+__SYSCALL(__NR_link, sys_link)
+#define __NR_unlink 10
+__SYSCALL(__NR_unlink, sys_unlink)
+#define __NR_execve 11
+__SYSCALL(__NR_execve, compat_sys_execve)
+#define __NR_chdir 12
+__SYSCALL(__NR_chdir, sys_chdir)
+			/* 13 was sys_time */
+__SYSCALL(13, sys_ni_syscall)
+#define __NR_mknod 14
+__SYSCALL(__NR_mknod, sys_mknod)
+#define __NR_chmod 15
+__SYSCALL(__NR_chmod, sys_chmod)
+#define __NR_lchown 16
+__SYSCALL(__NR_lchown, sys_lchown16)
+			/* 17 was sys_break */
+__SYSCALL(17, sys_ni_syscall)
+			/* 18 was sys_stat */
+__SYSCALL(18, sys_ni_syscall)
+#define __NR_lseek 19
+__SYSCALL(__NR_lseek, compat_sys_lseek)
+#define __NR_getpid 20
+__SYSCALL(__NR_getpid, sys_getpid)
+#define __NR_mount 21
+__SYSCALL(__NR_mount, sys_mount)
+			/* 22 was sys_umount */
+__SYSCALL(22, sys_ni_syscall)
+#define __NR_setuid 23
+__SYSCALL(__NR_setuid, sys_setuid16)
+#define __NR_getuid 24
+__SYSCALL(__NR_getuid, sys_getuid16)
+			/* 25 was sys_stime */
+__SYSCALL(25, sys_ni_syscall)
+#define __NR_ptrace 26
+__SYSCALL(__NR_ptrace, compat_sys_ptrace)
+			/* 27 was sys_alarm */
+__SYSCALL(27, sys_ni_syscall)
+			/* 28 was sys_fstat */
+__SYSCALL(28, sys_ni_syscall)
+#define __NR_pause 29
+__SYSCALL(__NR_pause, sys_pause)
+			/* 30 was sys_utime */
+__SYSCALL(30, sys_ni_syscall)
+			/* 31 was sys_stty */
+__SYSCALL(31, sys_ni_syscall)
+			/* 32 was sys_gtty */
+__SYSCALL(32, sys_ni_syscall)
+#define __NR_access 33
+__SYSCALL(__NR_access, sys_access)
+#define __NR_nice 34
+__SYSCALL(__NR_nice, sys_nice)
+			/* 35 was sys_ftime */
+__SYSCALL(35, sys_ni_syscall)
+#define __NR_sync 36
+__SYSCALL(__NR_sync, sys_sync)
+#define __NR_kill 37
+__SYSCALL(__NR_kill, sys_kill)
+#define __NR_rename 38
+__SYSCALL(__NR_rename, sys_rename)
+#define __NR_mkdir 39
+__SYSCALL(__NR_mkdir, sys_mkdir)
+#define __NR_rmdir 40
+__SYSCALL(__NR_rmdir, sys_rmdir)
+#define __NR_dup 41
+__SYSCALL(__NR_dup, sys_dup)
+#define __NR_pipe 42
+__SYSCALL(__NR_pipe, sys_pipe)
+#define __NR_times 43
+__SYSCALL(__NR_times, compat_sys_times)
+			/* 44 was sys_prof */
+__SYSCALL(44, sys_ni_syscall)
+#define __NR_brk 45
+__SYSCALL(__NR_brk, sys_brk)
+#define __NR_setgid 46
+__SYSCALL(__NR_setgid, sys_setgid16)
+#define __NR_getgid 47
+__SYSCALL(__NR_getgid, sys_getgid16)
+			/* 48 was sys_signal */
+__SYSCALL(48, sys_ni_syscall)
+#define __NR_geteuid 49
+__SYSCALL(__NR_geteuid, sys_geteuid16)
+#define __NR_getegid 50
+__SYSCALL(__NR_getegid, sys_getegid16)
+#define __NR_acct 51
+__SYSCALL(__NR_acct, sys_acct)
+#define __NR_umount2 52
+__SYSCALL(__NR_umount2, sys_umount)
+			/* 53 was sys_lock */
+__SYSCALL(53, sys_ni_syscall)
+#define __NR_ioctl 54
+__SYSCALL(__NR_ioctl, compat_sys_ioctl)
+#define __NR_fcntl 55
+__SYSCALL(__NR_fcntl, compat_sys_fcntl)
+			/* 56 was sys_mpx */
+__SYSCALL(56, sys_ni_syscall)
+#define __NR_setpgid 57
+__SYSCALL(__NR_setpgid, sys_setpgid)
+			/* 58 was sys_ulimit */
+__SYSCALL(58, sys_ni_syscall)
+			/* 59 was sys_olduname */
+__SYSCALL(59, sys_ni_syscall)
+#define __NR_umask 60
+__SYSCALL(__NR_umask, sys_umask)
+#define __NR_chroot 61
+__SYSCALL(__NR_chroot, sys_chroot)
+#define __NR_ustat 62
+__SYSCALL(__NR_ustat, compat_sys_ustat)
+#define __NR_dup2 63
+__SYSCALL(__NR_dup2, sys_dup2)
+#define __NR_getppid 64
+__SYSCALL(__NR_getppid, sys_getppid)
+#define __NR_getpgrp 65
+__SYSCALL(__NR_getpgrp, sys_getpgrp)
+#define __NR_setsid 66
+__SYSCALL(__NR_setsid, sys_setsid)
+#define __NR_sigaction 67
+__SYSCALL(__NR_sigaction, compat_sys_sigaction)
+			/* 68 was sys_sgetmask */
+__SYSCALL(68, sys_ni_syscall)
+			/* 69 was sys_ssetmask */
+__SYSCALL(69, sys_ni_syscall)
+#define __NR_setreuid 70
+__SYSCALL(__NR_setreuid, sys_setreuid16)
+#define __NR_setregid 71
+__SYSCALL(__NR_setregid, sys_setregid16)
+#define __NR_sigsuspend 72
+__SYSCALL(__NR_sigsuspend, sys_sigsuspend)
+#define __NR_sigpending 73
+__SYSCALL(__NR_sigpending, compat_sys_sigpending)
+#define __NR_sethostname 74
+__SYSCALL(__NR_sethostname, sys_sethostname)
+#define __NR_setrlimit 75
+__SYSCALL(__NR_setrlimit, compat_sys_setrlimit)
+			/* 76 was compat_sys_getrlimit */
+__SYSCALL(76, sys_ni_syscall)
+#define __NR_getrusage 77
+__SYSCALL(__NR_getrusage, compat_sys_getrusage)
+#define __NR_gettimeofday 78
+__SYSCALL(__NR_gettimeofday, compat_sys_gettimeofday)
+#define __NR_settimeofday 79
+__SYSCALL(__NR_settimeofday, compat_sys_settimeofday)
+#define __NR_getgroups 80
+__SYSCALL(__NR_getgroups, sys_getgroups16)
+#define __NR_setgroups 81
+__SYSCALL(__NR_setgroups, sys_setgroups16)
+			/* 82 was compat_sys_select */
+__SYSCALL(82, sys_ni_syscall)
+#define __NR_symlink 83
+__SYSCALL(__NR_symlink, sys_symlink)
+			/* 84 was sys_lstat */
+__SYSCALL(84, sys_ni_syscall)
+#define __NR_readlink 85
+__SYSCALL(__NR_readlink, sys_readlink)
+#define __NR_uselib 86
+__SYSCALL(__NR_uselib, sys_uselib)
+#define __NR_swapon 87
+__SYSCALL(__NR_swapon, sys_swapon)
+#define __NR_reboot 88
+__SYSCALL(__NR_reboot, sys_reboot)
+			/* 89 was sys_readdir */
+__SYSCALL(89, sys_ni_syscall)
+			/* 90 was sys_mmap */
+__SYSCALL(90, sys_ni_syscall)
+#define __NR_munmap 91
+__SYSCALL(__NR_munmap, sys_munmap)
+#define __NR_truncate 92
+__SYSCALL(__NR_truncate, compat_sys_truncate)
+#define __NR_ftruncate 93
+__SYSCALL(__NR_ftruncate, compat_sys_ftruncate)
+#define __NR_fchmod 94
+__SYSCALL(__NR_fchmod, sys_fchmod)
+#define __NR_fchown 95
+__SYSCALL(__NR_fchown, sys_fchown16)
+#define __NR_getpriority 96
+__SYSCALL(__NR_getpriority, sys_getpriority)
+#define __NR_setpriority 97
+__SYSCALL(__NR_setpriority, sys_setpriority)
+			/* 98 was sys_profil */
+__SYSCALL(98, sys_ni_syscall)
+#define __NR_statfs 99
+__SYSCALL(__NR_statfs, compat_sys_statfs)
+#define __NR_fstatfs 100
+__SYSCALL(__NR_fstatfs, compat_sys_fstatfs)
+			/* 101 was sys_ioperm */
+__SYSCALL(101, sys_ni_syscall)
+			/* 102 was sys_socketcall */
+__SYSCALL(102, sys_ni_syscall)
+#define __NR_syslog 103
+__SYSCALL(__NR_syslog, sys_syslog)
+#define __NR_setitimer 104
+__SYSCALL(__NR_setitimer, compat_sys_setitimer)
+#define __NR_getitimer 105
+__SYSCALL(__NR_getitimer, compat_sys_getitimer)
+#define __NR_stat 106
+__SYSCALL(__NR_stat, compat_sys_newstat)
+#define __NR_lstat 107
+__SYSCALL(__NR_lstat, compat_sys_newlstat)
+#define __NR_fstat 108
+__SYSCALL(__NR_fstat, compat_sys_newfstat)
+			/* 109 was sys_uname */
+__SYSCALL(109, sys_ni_syscall)
+			/* 110 was sys_iopl */
+__SYSCALL(110, sys_ni_syscall)
+#define __NR_vhangup 111
+__SYSCALL(__NR_vhangup, sys_vhangup)
+			/* 112 was sys_idle */
+__SYSCALL(112, sys_ni_syscall)
+			/* 113 was sys_syscall */
+__SYSCALL(113, sys_ni_syscall)
+#define __NR_wait4 114
+__SYSCALL(__NR_wait4, compat_sys_wait4)
+#define __NR_swapoff 115
+__SYSCALL(__NR_swapoff, sys_swapoff)
+#define __NR_sysinfo 116
+__SYSCALL(__NR_sysinfo, compat_sys_sysinfo)
+			/* 117 was sys_ipc */
+__SYSCALL(117, sys_ni_syscall)
+#define __NR_fsync 118
+__SYSCALL(__NR_fsync, sys_fsync)
+#define __NR_sigreturn 119
+__SYSCALL(__NR_sigreturn, compat_sys_sigreturn)
+#define __NR_clone 120
+__SYSCALL(__NR_clone, sys_clone)
+#define __NR_setdomainname 121
+__SYSCALL(__NR_setdomainname, sys_setdomainname)
+#define __NR_uname 122
+__SYSCALL(__NR_uname, sys_newuname)
+			/* 123 was sys_modify_ldt */
+__SYSCALL(123, sys_ni_syscall)
+#define __NR_adjtimex 124
+__SYSCALL(__NR_adjtimex, sys_adjtimex_time32)
+#define __NR_mprotect 125
+__SYSCALL(__NR_mprotect, sys_mprotect)
+#define __NR_sigprocmask 126
+__SYSCALL(__NR_sigprocmask, compat_sys_sigprocmask)
+			/* 127 was sys_create_module */
+__SYSCALL(127, sys_ni_syscall)
+#define __NR_init_module 128
+__SYSCALL(__NR_init_module, sys_init_module)
+#define __NR_delete_module 129
+__SYSCALL(__NR_delete_module, sys_delete_module)
+			/* 130 was sys_get_kernel_syms */
+__SYSCALL(130, sys_ni_syscall)
+#define __NR_quotactl 131
+__SYSCALL(__NR_quotactl, sys_quotactl)
+#define __NR_getpgid 132
+__SYSCALL(__NR_getpgid, sys_getpgid)
+#define __NR_fchdir 133
+__SYSCALL(__NR_fchdir, sys_fchdir)
+#define __NR_bdflush 134
+__SYSCALL(__NR_bdflush, sys_ni_syscall)
+#define __NR_sysfs 135
+__SYSCALL(__NR_sysfs, sys_sysfs)
+#define __NR_personality 136
+__SYSCALL(__NR_personality, sys_personality)
+			/* 137 was sys_afs_syscall */
+__SYSCALL(137, sys_ni_syscall)
+#define __NR_setfsuid 138
+__SYSCALL(__NR_setfsuid, sys_setfsuid16)
+#define __NR_setfsgid 139
+__SYSCALL(__NR_setfsgid, sys_setfsgid16)
+#define __NR__llseek 140
+__SYSCALL(__NR__llseek, sys_llseek)
+#define __NR_getdents 141
+__SYSCALL(__NR_getdents, compat_sys_getdents)
+#define __NR__newselect 142
+__SYSCALL(__NR__newselect, compat_sys_select)
+#define __NR_flock 143
+__SYSCALL(__NR_flock, sys_flock)
+#define __NR_msync 144
+__SYSCALL(__NR_msync, sys_msync)
+#define __NR_readv 145
+__SYSCALL(__NR_readv, sys_readv)
+#define __NR_writev 146
+__SYSCALL(__NR_writev, sys_writev)
+#define __NR_getsid 147
+__SYSCALL(__NR_getsid, sys_getsid)
+#define __NR_fdatasync 148
+__SYSCALL(__NR_fdatasync, sys_fdatasync)
+			/* 149 was sys_sysctl */
+__SYSCALL(149, sys_ni_syscall)
+#define __NR_mlock 150
+__SYSCALL(__NR_mlock, sys_mlock)
+#define __NR_munlock 151
+__SYSCALL(__NR_munlock, sys_munlock)
+#define __NR_mlockall 152
+__SYSCALL(__NR_mlockall, sys_mlockall)
+#define __NR_munlockall 153
+__SYSCALL(__NR_munlockall, sys_munlockall)
+#define __NR_sched_setparam 154
+__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
+#define __NR_sched_getparam 155
+__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
+#define __NR_sched_setscheduler 156
+__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
+#define __NR_sched_getscheduler 157
+__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
+#define __NR_sched_yield 158
+__SYSCALL(__NR_sched_yield, sys_sched_yield)
+#define __NR_sched_get_priority_max 159
+__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
+#define __NR_sched_get_priority_min 160
+__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
+#define __NR_sched_rr_get_interval 161
+__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval_time32)
+#define __NR_nanosleep 162
+__SYSCALL(__NR_nanosleep, sys_nanosleep_time32)
+#define __NR_mremap 163
+__SYSCALL(__NR_mremap, sys_mremap)
+#define __NR_setresuid 164
+__SYSCALL(__NR_setresuid, sys_setresuid16)
+#define __NR_getresuid 165
+__SYSCALL(__NR_getresuid, sys_getresuid16)
+			/* 166 was sys_vm86 */
+__SYSCALL(166, sys_ni_syscall)
+			/* 167 was sys_query_module */
+__SYSCALL(167, sys_ni_syscall)
+#define __NR_poll 168
+__SYSCALL(__NR_poll, sys_poll)
+#define __NR_nfsservctl 169
+__SYSCALL(__NR_nfsservctl, sys_ni_syscall)
+#define __NR_setresgid 170
+__SYSCALL(__NR_setresgid, sys_setresgid16)
+#define __NR_getresgid 171
+__SYSCALL(__NR_getresgid, sys_getresgid16)
+#define __NR_prctl 172
+__SYSCALL(__NR_prctl, sys_prctl)
+#define __NR_rt_sigreturn 173
+__SYSCALL(__NR_rt_sigreturn, compat_sys_rt_sigreturn)
+#define __NR_rt_sigaction 174
+__SYSCALL(__NR_rt_sigaction, compat_sys_rt_sigaction)
+#define __NR_rt_sigprocmask 175
+__SYSCALL(__NR_rt_sigprocmask, compat_sys_rt_sigprocmask)
+#define __NR_rt_sigpending 176
+__SYSCALL(__NR_rt_sigpending, compat_sys_rt_sigpending)
+#define __NR_rt_sigtimedwait 177
+__SYSCALL(__NR_rt_sigtimedwait, compat_sys_rt_sigtimedwait_time32)
+#define __NR_rt_sigqueueinfo 178
+__SYSCALL(__NR_rt_sigqueueinfo, compat_sys_rt_sigqueueinfo)
+#define __NR_rt_sigsuspend 179
+__SYSCALL(__NR_rt_sigsuspend, compat_sys_rt_sigsuspend)
+#define __NR_pread64 180
+__SYSCALL(__NR_pread64, compat_sys_aarch32_pread64)
+#define __NR_pwrite64 181
+__SYSCALL(__NR_pwrite64, compat_sys_aarch32_pwrite64)
+#define __NR_chown 182
+__SYSCALL(__NR_chown, sys_chown16)
+#define __NR_getcwd 183
+__SYSCALL(__NR_getcwd, sys_getcwd)
+#define __NR_capget 184
+__SYSCALL(__NR_capget, sys_capget)
+#define __NR_capset 185
+__SYSCALL(__NR_capset, sys_capset)
+#define __NR_sigaltstack 186
+__SYSCALL(__NR_sigaltstack, compat_sys_sigaltstack)
+#define __NR_sendfile 187
+__SYSCALL(__NR_sendfile, compat_sys_sendfile)
+			/* 188 reserved */
+__SYSCALL(188, sys_ni_syscall)
+			/* 189 reserved */
+__SYSCALL(189, sys_ni_syscall)
+#define __NR_vfork 190
+__SYSCALL(__NR_vfork, sys_vfork)
+#define __NR_ugetrlimit 191	/* SuS compliant getrlimit */
+__SYSCALL(__NR_ugetrlimit, compat_sys_getrlimit)		/* SuS compliant getrlimit */
+#define __NR_mmap2 192
+__SYSCALL(__NR_mmap2, compat_sys_aarch32_mmap2)
+#define __NR_truncate64 193
+__SYSCALL(__NR_truncate64, compat_sys_aarch32_truncate64)
+#define __NR_ftruncate64 194
+__SYSCALL(__NR_ftruncate64, compat_sys_aarch32_ftruncate64)
+#define __NR_stat64 195
+__SYSCALL(__NR_stat64, sys_stat64)
+#define __NR_lstat64 196
+__SYSCALL(__NR_lstat64, sys_lstat64)
+#define __NR_fstat64 197
+__SYSCALL(__NR_fstat64, sys_fstat64)
+#define __NR_lchown32 198
+__SYSCALL(__NR_lchown32, sys_lchown)
+#define __NR_getuid32 199
+__SYSCALL(__NR_getuid32, sys_getuid)
+#define __NR_getgid32 200
+__SYSCALL(__NR_getgid32, sys_getgid)
+#define __NR_geteuid32 201
+__SYSCALL(__NR_geteuid32, sys_geteuid)
+#define __NR_getegid32 202
+__SYSCALL(__NR_getegid32, sys_getegid)
+#define __NR_setreuid32 203
+__SYSCALL(__NR_setreuid32, sys_setreuid)
+#define __NR_setregid32 204
+__SYSCALL(__NR_setregid32, sys_setregid)
+#define __NR_getgroups32 205
+__SYSCALL(__NR_getgroups32, sys_getgroups)
+#define __NR_setgroups32 206
+__SYSCALL(__NR_setgroups32, sys_setgroups)
+#define __NR_fchown32 207
+__SYSCALL(__NR_fchown32, sys_fchown)
+#define __NR_setresuid32 208
+__SYSCALL(__NR_setresuid32, sys_setresuid)
+#define __NR_getresuid32 209
+__SYSCALL(__NR_getresuid32, sys_getresuid)
+#define __NR_setresgid32 210
+__SYSCALL(__NR_setresgid32, sys_setresgid)
+#define __NR_getresgid32 211
+__SYSCALL(__NR_getresgid32, sys_getresgid)
+#define __NR_chown32 212
+__SYSCALL(__NR_chown32, sys_chown)
+#define __NR_setuid32 213
+__SYSCALL(__NR_setuid32, sys_setuid)
+#define __NR_setgid32 214
+__SYSCALL(__NR_setgid32, sys_setgid)
+#define __NR_setfsuid32 215
+__SYSCALL(__NR_setfsuid32, sys_setfsuid)
+#define __NR_setfsgid32 216
+__SYSCALL(__NR_setfsgid32, sys_setfsgid)
+#define __NR_getdents64 217
+__SYSCALL(__NR_getdents64, sys_getdents64)
+#define __NR_pivot_root 218
+__SYSCALL(__NR_pivot_root, sys_pivot_root)
+#define __NR_mincore 219
+__SYSCALL(__NR_mincore, sys_mincore)
+#define __NR_madvise 220
+__SYSCALL(__NR_madvise, sys_madvise)
+#define __NR_fcntl64 221
+__SYSCALL(__NR_fcntl64, compat_sys_fcntl64)
+			/* 222 for tux */
+__SYSCALL(222, sys_ni_syscall)
+			/* 223 is unused */
+__SYSCALL(223, sys_ni_syscall)
+#define __NR_gettid 224
+__SYSCALL(__NR_gettid, sys_gettid)
+#define __NR_readahead 225
+__SYSCALL(__NR_readahead, compat_sys_aarch32_readahead)
+#define __NR_setxattr 226
+__SYSCALL(__NR_setxattr, sys_setxattr)
+#define __NR_lsetxattr 227
+__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
+#define __NR_fsetxattr 228
+__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
+#define __NR_getxattr 229
+__SYSCALL(__NR_getxattr, sys_getxattr)
+#define __NR_lgetxattr 230
+__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
+#define __NR_fgetxattr 231
+__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
+#define __NR_listxattr 232
+__SYSCALL(__NR_listxattr, sys_listxattr)
+#define __NR_llistxattr 233
+__SYSCALL(__NR_llistxattr, sys_llistxattr)
+#define __NR_flistxattr 234
+__SYSCALL(__NR_flistxattr, sys_flistxattr)
+#define __NR_removexattr 235
+__SYSCALL(__NR_removexattr, sys_removexattr)
+#define __NR_lremovexattr 236
+__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
+#define __NR_fremovexattr 237
+__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
+#define __NR_tkill 238
+__SYSCALL(__NR_tkill, sys_tkill)
+#define __NR_sendfile64 239
+__SYSCALL(__NR_sendfile64, sys_sendfile64)
+#define __NR_futex 240
+__SYSCALL(__NR_futex, sys_futex_time32)
+#define __NR_sched_setaffinity 241
+__SYSCALL(__NR_sched_setaffinity, compat_sys_sched_setaffinity)
+#define __NR_sched_getaffinity 242
+__SYSCALL(__NR_sched_getaffinity, compat_sys_sched_getaffinity)
+#define __NR_io_setup 243
+__SYSCALL(__NR_io_setup, compat_sys_io_setup)
+#define __NR_io_destroy 244
+__SYSCALL(__NR_io_destroy, sys_io_destroy)
+#define __NR_io_getevents 245
+__SYSCALL(__NR_io_getevents, sys_io_getevents_time32)
+#define __NR_io_submit 246
+__SYSCALL(__NR_io_submit, compat_sys_io_submit)
+#define __NR_io_cancel 247
+__SYSCALL(__NR_io_cancel, sys_io_cancel)
+#define __NR_exit_group 248
+__SYSCALL(__NR_exit_group, sys_exit_group)
+#define __NR_lookup_dcookie 249
+__SYSCALL(__NR_lookup_dcookie, compat_sys_lookup_dcookie)
+#define __NR_epoll_create 250
+__SYSCALL(__NR_epoll_create, sys_epoll_create)
+#define __NR_epoll_ctl 251
+__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
+#define __NR_epoll_wait 252
+__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
+#define __NR_remap_file_pages 253
+__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
+			/* 254 for set_thread_area */
+__SYSCALL(254, sys_ni_syscall)
+			/* 255 for get_thread_area */
+__SYSCALL(255, sys_ni_syscall)
+#define __NR_set_tid_address 256
+__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
+#define __NR_timer_create 257
+__SYSCALL(__NR_timer_create, compat_sys_timer_create)
+#define __NR_timer_settime 258
+__SYSCALL(__NR_timer_settime, sys_timer_settime32)
+#define __NR_timer_gettime 259
+__SYSCALL(__NR_timer_gettime, sys_timer_gettime32)
+#define __NR_timer_getoverrun 260
+__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
+#define __NR_timer_delete 261
+__SYSCALL(__NR_timer_delete, sys_timer_delete)
+#define __NR_clock_settime 262
+__SYSCALL(__NR_clock_settime, sys_clock_settime32)
+#define __NR_clock_gettime 263
+__SYSCALL(__NR_clock_gettime, sys_clock_gettime32)
+#define __NR_clock_getres 264
+__SYSCALL(__NR_clock_getres, sys_clock_getres_time32)
+#define __NR_clock_nanosleep 265
+__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep_time32)
+#define __NR_statfs64 266
+__SYSCALL(__NR_statfs64, compat_sys_aarch32_statfs64)
+#define __NR_fstatfs64 267
+__SYSCALL(__NR_fstatfs64, compat_sys_aarch32_fstatfs64)
+#define __NR_tgkill 268
+__SYSCALL(__NR_tgkill, sys_tgkill)
+#define __NR_utimes 269
+__SYSCALL(__NR_utimes, sys_utimes_time32)
+#define __NR_arm_fadvise64_64 270
+__SYSCALL(__NR_arm_fadvise64_64, compat_sys_aarch32_fadvise64_64)
+#define __NR_pciconfig_iobase 271
+__SYSCALL(__NR_pciconfig_iobase, sys_pciconfig_iobase)
+#define __NR_pciconfig_read 272
+__SYSCALL(__NR_pciconfig_read, sys_pciconfig_read)
+#define __NR_pciconfig_write 273
+__SYSCALL(__NR_pciconfig_write, sys_pciconfig_write)
+#define __NR_mq_open 274
+__SYSCALL(__NR_mq_open, compat_sys_mq_open)
+#define __NR_mq_unlink 275
+__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
+#define __NR_mq_timedsend 276
+__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend_time32)
+#define __NR_mq_timedreceive 277
+__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive_time32)
+#define __NR_mq_notify 278
+__SYSCALL(__NR_mq_notify, compat_sys_mq_notify)
+#define __NR_mq_getsetattr 279
+__SYSCALL(__NR_mq_getsetattr, compat_sys_mq_getsetattr)
+#define __NR_waitid 280
+__SYSCALL(__NR_waitid, compat_sys_waitid)
+#define __NR_socket 281
+__SYSCALL(__NR_socket, sys_socket)
+#define __NR_bind 282
+__SYSCALL(__NR_bind, sys_bind)
+#define __NR_connect 283
+__SYSCALL(__NR_connect, sys_connect)
+#define __NR_listen 284
+__SYSCALL(__NR_listen, sys_listen)
+#define __NR_accept 285
+__SYSCALL(__NR_accept, sys_accept)
+#define __NR_getsockname 286
+__SYSCALL(__NR_getsockname, sys_getsockname)
+#define __NR_getpeername 287
+__SYSCALL(__NR_getpeername, sys_getpeername)
+#define __NR_socketpair 288
+__SYSCALL(__NR_socketpair, sys_socketpair)
+#define __NR_send 289
+__SYSCALL(__NR_send, sys_send)
+#define __NR_sendto 290
+__SYSCALL(__NR_sendto, sys_sendto)
+#define __NR_recv 291
+__SYSCALL(__NR_recv, compat_sys_recv)
+#define __NR_recvfrom 292
+__SYSCALL(__NR_recvfrom, compat_sys_recvfrom)
+#define __NR_shutdown 293
+__SYSCALL(__NR_shutdown, sys_shutdown)
+#define __NR_setsockopt 294
+__SYSCALL(__NR_setsockopt, sys_setsockopt)
+#define __NR_getsockopt 295
+__SYSCALL(__NR_getsockopt, sys_getsockopt)
+#define __NR_sendmsg 296
+__SYSCALL(__NR_sendmsg, compat_sys_sendmsg)
+#define __NR_recvmsg 297
+__SYSCALL(__NR_recvmsg, compat_sys_recvmsg)
+#define __NR_semop 298
+__SYSCALL(__NR_semop, sys_semop)
+#define __NR_semget 299
+__SYSCALL(__NR_semget, sys_semget)
+#define __NR_semctl 300
+__SYSCALL(__NR_semctl, compat_sys_old_semctl)
+#define __NR_msgsnd 301
+__SYSCALL(__NR_msgsnd, compat_sys_msgsnd)
+#define __NR_msgrcv 302
+__SYSCALL(__NR_msgrcv, compat_sys_msgrcv)
+#define __NR_msgget 303
+__SYSCALL(__NR_msgget, sys_msgget)
+#define __NR_msgctl 304
+__SYSCALL(__NR_msgctl, compat_sys_old_msgctl)
+#define __NR_shmat 305
+__SYSCALL(__NR_shmat, compat_sys_shmat)
+#define __NR_shmdt 306
+__SYSCALL(__NR_shmdt, sys_shmdt)
+#define __NR_shmget 307
+__SYSCALL(__NR_shmget, sys_shmget)
+#define __NR_shmctl 308
+__SYSCALL(__NR_shmctl, compat_sys_old_shmctl)
+#define __NR_add_key 309
+__SYSCALL(__NR_add_key, sys_add_key)
+#define __NR_request_key 310
+__SYSCALL(__NR_request_key, sys_request_key)
+#define __NR_keyctl 311
+__SYSCALL(__NR_keyctl, compat_sys_keyctl)
+#define __NR_semtimedop 312
+__SYSCALL(__NR_semtimedop, sys_semtimedop_time32)
+#define __NR_vserver 313
+__SYSCALL(__NR_vserver, sys_ni_syscall)
+#define __NR_ioprio_set 314
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 315
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
+#define __NR_inotify_init 316
+__SYSCALL(__NR_inotify_init, sys_inotify_init)
+#define __NR_inotify_add_watch 317
+__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
+#define __NR_inotify_rm_watch 318
+__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
+#define __NR_mbind 319
+__SYSCALL(__NR_mbind, sys_mbind)
+#define __NR_get_mempolicy 320
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
+#define __NR_set_mempolicy 321
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
+#define __NR_openat 322
+__SYSCALL(__NR_openat, compat_sys_openat)
+#define __NR_mkdirat 323
+__SYSCALL(__NR_mkdirat, sys_mkdirat)
+#define __NR_mknodat 324
+__SYSCALL(__NR_mknodat, sys_mknodat)
+#define __NR_fchownat 325
+__SYSCALL(__NR_fchownat, sys_fchownat)
+#define __NR_futimesat 326
+__SYSCALL(__NR_futimesat, sys_futimesat_time32)
+#define __NR_fstatat64 327
+__SYSCALL(__NR_fstatat64, sys_fstatat64)
+#define __NR_unlinkat 328
+__SYSCALL(__NR_unlinkat, sys_unlinkat)
+#define __NR_renameat 329
+__SYSCALL(__NR_renameat, sys_renameat)
+#define __NR_linkat 330
+__SYSCALL(__NR_linkat, sys_linkat)
+#define __NR_symlinkat 331
+__SYSCALL(__NR_symlinkat, sys_symlinkat)
+#define __NR_readlinkat 332
+__SYSCALL(__NR_readlinkat, sys_readlinkat)
+#define __NR_fchmodat 333
+__SYSCALL(__NR_fchmodat, sys_fchmodat)
+#define __NR_faccessat 334
+__SYSCALL(__NR_faccessat, sys_faccessat)
+#define __NR_pselect6 335
+__SYSCALL(__NR_pselect6, compat_sys_pselect6_time32)
+#define __NR_ppoll 336
+__SYSCALL(__NR_ppoll, compat_sys_ppoll_time32)
+#define __NR_unshare 337
+__SYSCALL(__NR_unshare, sys_unshare)
+#define __NR_set_robust_list 338
+__SYSCALL(__NR_set_robust_list, compat_sys_set_robust_list)
+#define __NR_get_robust_list 339
+__SYSCALL(__NR_get_robust_list, compat_sys_get_robust_list)
+#define __NR_splice 340
+__SYSCALL(__NR_splice, sys_splice)
+#define __NR_sync_file_range2 341
+__SYSCALL(__NR_sync_file_range2, compat_sys_aarch32_sync_file_range2)
+#define __NR_tee 342
+__SYSCALL(__NR_tee, sys_tee)
+#define __NR_vmsplice 343
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+#define __NR_move_pages 344
+__SYSCALL(__NR_move_pages, sys_move_pages)
+#define __NR_getcpu 345
+__SYSCALL(__NR_getcpu, sys_getcpu)
+#define __NR_epoll_pwait 346
+__SYSCALL(__NR_epoll_pwait, compat_sys_epoll_pwait)
+#define __NR_kexec_load 347
+__SYSCALL(__NR_kexec_load, compat_sys_kexec_load)
+#define __NR_utimensat 348
+__SYSCALL(__NR_utimensat, sys_utimensat_time32)
+#define __NR_signalfd 349
+__SYSCALL(__NR_signalfd, compat_sys_signalfd)
+#define __NR_timerfd_create 350
+__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
+#define __NR_eventfd 351
+__SYSCALL(__NR_eventfd, sys_eventfd)
+#define __NR_fallocate 352
+__SYSCALL(__NR_fallocate, compat_sys_aarch32_fallocate)
+#define __NR_timerfd_settime 353
+__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime32)
+#define __NR_timerfd_gettime 354
+__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime32)
+#define __NR_signalfd4 355
+__SYSCALL(__NR_signalfd4, compat_sys_signalfd4)
+#define __NR_eventfd2 356
+__SYSCALL(__NR_eventfd2, sys_eventfd2)
+#define __NR_epoll_create1 357
+__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
+#define __NR_dup3 358
+__SYSCALL(__NR_dup3, sys_dup3)
+#define __NR_pipe2 359
+__SYSCALL(__NR_pipe2, sys_pipe2)
+#define __NR_inotify_init1 360
+__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
+#define __NR_preadv 361
+__SYSCALL(__NR_preadv, compat_sys_preadv)
+#define __NR_pwritev 362
+__SYSCALL(__NR_pwritev, compat_sys_pwritev)
+#define __NR_rt_tgsigqueueinfo 363
+__SYSCALL(__NR_rt_tgsigqueueinfo, compat_sys_rt_tgsigqueueinfo)
+#define __NR_perf_event_open 364
+__SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_recvmmsg 365
+__SYSCALL(__NR_recvmmsg, compat_sys_recvmmsg_time32)
+#define __NR_accept4 366
+__SYSCALL(__NR_accept4, sys_accept4)
+#define __NR_fanotify_init 367
+__SYSCALL(__NR_fanotify_init, sys_fanotify_init)
+#define __NR_fanotify_mark 368
+__SYSCALL(__NR_fanotify_mark, compat_sys_fanotify_mark)
+#define __NR_prlimit64 369
+__SYSCALL(__NR_prlimit64, sys_prlimit64)
+#define __NR_name_to_handle_at 370
+__SYSCALL(__NR_name_to_handle_at, sys_name_to_handle_at)
+#define __NR_open_by_handle_at 371
+__SYSCALL(__NR_open_by_handle_at, compat_sys_open_by_handle_at)
+#define __NR_clock_adjtime 372
+__SYSCALL(__NR_clock_adjtime, sys_clock_adjtime32)
+#define __NR_syncfs 373
+__SYSCALL(__NR_syncfs, sys_syncfs)
+#define __NR_sendmmsg 374
+__SYSCALL(__NR_sendmmsg, compat_sys_sendmmsg)
+#define __NR_setns 375
+__SYSCALL(__NR_setns, sys_setns)
+#define __NR_process_vm_readv 376
+__SYSCALL(__NR_process_vm_readv, sys_process_vm_readv)
+#define __NR_process_vm_writev 377
+__SYSCALL(__NR_process_vm_writev, sys_process_vm_writev)
+#define __NR_kcmp 378
+__SYSCALL(__NR_kcmp, sys_kcmp)
+#define __NR_finit_module 379
+__SYSCALL(__NR_finit_module, sys_finit_module)
+#define __NR_sched_setattr 380
+__SYSCALL(__NR_sched_setattr, sys_sched_setattr)
+#define __NR_sched_getattr 381
+__SYSCALL(__NR_sched_getattr, sys_sched_getattr)
+#define __NR_renameat2 382
+__SYSCALL(__NR_renameat2, sys_renameat2)
+#define __NR_seccomp 383
+__SYSCALL(__NR_seccomp, sys_seccomp)
+#define __NR_getrandom 384
+__SYSCALL(__NR_getrandom, sys_getrandom)
+#define __NR_memfd_create 385
+__SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 386
+__SYSCALL(__NR_bpf, sys_bpf)
+#define __NR_execveat 387
+__SYSCALL(__NR_execveat, compat_sys_execveat)
+#define __NR_userfaultfd 388
+__SYSCALL(__NR_userfaultfd, sys_userfaultfd)
+#define __NR_membarrier 389
+__SYSCALL(__NR_membarrier, sys_membarrier)
+#define __NR_mlock2 390
+__SYSCALL(__NR_mlock2, sys_mlock2)
+#define __NR_copy_file_range 391
+__SYSCALL(__NR_copy_file_range, sys_copy_file_range)
+#define __NR_preadv2 392
+__SYSCALL(__NR_preadv2, compat_sys_preadv2)
+#define __NR_pwritev2 393
+__SYSCALL(__NR_pwritev2, compat_sys_pwritev2)
+#define __NR_pkey_mprotect 394
+__SYSCALL(__NR_pkey_mprotect, sys_pkey_mprotect)
+#define __NR_pkey_alloc 395
+__SYSCALL(__NR_pkey_alloc, sys_pkey_alloc)
+#define __NR_pkey_free 396
+__SYSCALL(__NR_pkey_free, sys_pkey_free)
+#define __NR_statx 397
+__SYSCALL(__NR_statx, sys_statx)
+#define __NR_rseq 398
+__SYSCALL(__NR_rseq, sys_rseq)
+#define __NR_io_pgetevents 399
+__SYSCALL(__NR_io_pgetevents, compat_sys_io_pgetevents)
+#define __NR_migrate_pages 400
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
+#define __NR_kexec_file_load 401
+__SYSCALL(__NR_kexec_file_load, sys_kexec_file_load)
+/* 402 is unused */
+#define __NR_clock_gettime64 403
+__SYSCALL(__NR_clock_gettime64, sys_clock_gettime)
+#define __NR_clock_settime64 404
+__SYSCALL(__NR_clock_settime64, sys_clock_settime)
+#define __NR_clock_adjtime64 405
+__SYSCALL(__NR_clock_adjtime64, sys_clock_adjtime)
+#define __NR_clock_getres_time64 406
+__SYSCALL(__NR_clock_getres_time64, sys_clock_getres)
+#define __NR_clock_nanosleep_time64 407
+__SYSCALL(__NR_clock_nanosleep_time64, sys_clock_nanosleep)
+#define __NR_timer_gettime64 408
+__SYSCALL(__NR_timer_gettime64, sys_timer_gettime)
+#define __NR_timer_settime64 409
+__SYSCALL(__NR_timer_settime64, sys_timer_settime)
+#define __NR_timerfd_gettime64 410
+__SYSCALL(__NR_timerfd_gettime64, sys_timerfd_gettime)
+#define __NR_timerfd_settime64 411
+__SYSCALL(__NR_timerfd_settime64, sys_timerfd_settime)
+#define __NR_utimensat_time64 412
+__SYSCALL(__NR_utimensat_time64, sys_utimensat)
+#define __NR_pselect6_time64 413
+__SYSCALL(__NR_pselect6_time64, compat_sys_pselect6_time64)
+#define __NR_ppoll_time64 414
+__SYSCALL(__NR_ppoll_time64, compat_sys_ppoll_time64)
+#define __NR_io_pgetevents_time64 416
+__SYSCALL(__NR_io_pgetevents_time64, sys_io_pgetevents)
+#define __NR_recvmmsg_time64 417
+__SYSCALL(__NR_recvmmsg_time64, compat_sys_recvmmsg_time64)
+#define __NR_mq_timedsend_time64 418
+__SYSCALL(__NR_mq_timedsend_time64, sys_mq_timedsend)
+#define __NR_mq_timedreceive_time64 419
+__SYSCALL(__NR_mq_timedreceive_time64, sys_mq_timedreceive)
+#define __NR_semtimedop_time64 420
+__SYSCALL(__NR_semtimedop_time64, sys_semtimedop)
+#define __NR_rt_sigtimedwait_time64 421
+__SYSCALL(__NR_rt_sigtimedwait_time64, compat_sys_rt_sigtimedwait_time64)
+#define __NR_futex_time64 422
+__SYSCALL(__NR_futex_time64, sys_futex)
+#define __NR_sched_rr_get_interval_time64 423
+__SYSCALL(__NR_sched_rr_get_interval_time64, sys_sched_rr_get_interval)
+#define __NR_pidfd_send_signal 424
+__SYSCALL(__NR_pidfd_send_signal, sys_pidfd_send_signal)
+#define __NR_io_uring_setup 425
+__SYSCALL(__NR_io_uring_setup, sys_io_uring_setup)
+#define __NR_io_uring_enter 426
+__SYSCALL(__NR_io_uring_enter, sys_io_uring_enter)
+#define __NR_io_uring_register 427
+__SYSCALL(__NR_io_uring_register, sys_io_uring_register)
+#define __NR_open_tree 428
+__SYSCALL(__NR_open_tree, sys_open_tree)
+#define __NR_move_mount 429
+__SYSCALL(__NR_move_mount, sys_move_mount)
+#define __NR_fsopen 430
+__SYSCALL(__NR_fsopen, sys_fsopen)
+#define __NR_fsconfig 431
+__SYSCALL(__NR_fsconfig, sys_fsconfig)
+#define __NR_fsmount 432
+__SYSCALL(__NR_fsmount, sys_fsmount)
+#define __NR_fspick 433
+__SYSCALL(__NR_fspick, sys_fspick)
+#define __NR_pidfd_open 434
+__SYSCALL(__NR_pidfd_open, sys_pidfd_open)
+#define __NR_clone3 435
+__SYSCALL(__NR_clone3, sys_clone3)
+#define __NR_close_range 436
+__SYSCALL(__NR_close_range, sys_close_range)
+#define __NR_openat2 437
+__SYSCALL(__NR_openat2, sys_openat2)
+#define __NR_pidfd_getfd 438
+__SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd)
+#define __NR_faccessat2 439
+__SYSCALL(__NR_faccessat2, sys_faccessat2)
+#define __NR_process_madvise 440
+__SYSCALL(__NR_process_madvise, sys_process_madvise)
+#define __NR_epoll_pwait2 441
+__SYSCALL(__NR_epoll_pwait2, compat_sys_epoll_pwait2)
+#define __NR_mount_setattr 442
+__SYSCALL(__NR_mount_setattr, sys_mount_setattr)
+#define __NR_quotactl_fd 443
+__SYSCALL(__NR_quotactl_fd, sys_quotactl_fd)
+#define __NR_landlock_create_ruleset 444
+__SYSCALL(__NR_landlock_create_ruleset, sys_landlock_create_ruleset)
+#define __NR_landlock_add_rule 445
+__SYSCALL(__NR_landlock_add_rule, sys_landlock_add_rule)
+#define __NR_landlock_restrict_self 446
+__SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self)
+#define __NR_process_mrelease 448
+__SYSCALL(__NR_process_mrelease, sys_process_mrelease)
+#define __NR_futex_waitv 449
+__SYSCALL(__NR_futex_waitv, sys_futex_waitv)
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
+#define __NR_cachestat 451
+__SYSCALL(__NR_cachestat, sys_cachestat)
+#define __NR_fchmodat2 452
+__SYSCALL(__NR_fchmodat2, sys_fchmodat2)
+
+/*
+ * Please add new compat syscalls above this comment and update
+ * __NR_compat_syscalls in asm/unistd.h.
+ */
diff --git a/arch/arm64/include/asm/uprobes.h b/arch/arm64/include/asm/uprobes.h
new file mode 100644
index 000000000..2b0949549
--- /dev/null
+++ b/arch/arm64/include/asm/uprobes.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-2016 Pratyush Anand <panand@redhat.com>
+ */
+
+#ifndef _ASM_UPROBES_H
+#define _ASM_UPROBES_H
+
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/probes.h>
+
+#define MAX_UINSN_BYTES		AARCH64_INSN_SIZE
+
+#define UPROBE_SWBP_INSN	cpu_to_le32(BRK64_OPCODE_UPROBES)
+#define UPROBE_SWBP_INSN_SIZE	AARCH64_INSN_SIZE
+#define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
+
+typedef __le32 uprobe_opcode_t;
+
+struct arch_uprobe_task {
+};
+
+struct arch_uprobe {
+	union {
+		u8 insn[MAX_UINSN_BYTES];
+		u8 ixol[MAX_UINSN_BYTES];
+	};
+	struct arch_probe_insn api;
+	bool simulate;
+};
+
+#endif
diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h
new file mode 100644
index 000000000..b4ae32109
--- /dev/null
+++ b/arch/arm64/include/asm/vdso.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Limited
+ */
+#ifndef __ASM_VDSO_H
+#define __ASM_VDSO_H
+
+/*
+ * Default link address for the vDSO.
+ * Since we randomise the VDSO mapping, there's little point in trying
+ * to prelink this.
+ */
+#define VDSO_LBASE	0x0
+
+#define __VVAR_PAGES    2
+
+#ifndef __ASSEMBLY__
+
+#include <generated/vdso-offsets.h>
+#ifdef CONFIG_COMPAT_VDSO
+#include <generated/vdso32-offsets.h>
+#endif
+
+#define VDSO_SYMBOL(base, name)						   \
+({									   \
+	(void *)(vdso_offset_##name - VDSO_LBASE + (unsigned long)(base)); \
+})
+
+extern char vdso_start[], vdso_end[];
+extern char vdso32_start[], vdso32_end[];
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_H */
diff --git a/arch/arm64/include/asm/vdso/clocksource.h b/arch/arm64/include/asm/vdso/clocksource.h
new file mode 100644
index 000000000..b054d9feb
--- /dev/null
+++ b/arch/arm64/include/asm/vdso/clocksource.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VDSOCLOCKSOURCE_H
+#define __ASM_VDSOCLOCKSOURCE_H
+
+#define VDSO_ARCH_CLOCKMODES					\
+	/* vdso clocksource for both 32 and 64bit tasks */	\
+	VDSO_CLOCKMODE_ARCHTIMER,				\
+	/* vdso clocksource for 64bit tasks only */		\
+	VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT
+
+#endif
diff --git a/arch/arm64/include/asm/vdso/compat_barrier.h b/arch/arm64/include/asm/vdso/compat_barrier.h
new file mode 100644
index 000000000..3ac35f4a6
--- /dev/null
+++ b/arch/arm64/include/asm/vdso/compat_barrier.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 ARM Limited
+ */
+#ifndef __COMPAT_BARRIER_H
+#define __COMPAT_BARRIER_H
+
+#ifndef __ASSEMBLY__
+/*
+ * Warning: This code is meant to be used with
+ * ENABLE_COMPAT_VDSO only.
+ */
+#ifndef ENABLE_COMPAT_VDSO
+#error This header is meant to be used with ENABLE_COMPAT_VDSO only
+#endif
+
+#ifdef dmb
+#undef dmb
+#endif
+
+#define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory")
+
+#define aarch32_smp_mb()	dmb(ish)
+#define aarch32_smp_rmb()	dmb(ishld)
+#define aarch32_smp_wmb()	dmb(ishst)
+
+#undef smp_mb
+#undef smp_rmb
+#undef smp_wmb
+
+#define smp_mb()	aarch32_smp_mb()
+#define smp_rmb()	aarch32_smp_rmb()
+#define smp_wmb()	aarch32_smp_wmb()
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __COMPAT_BARRIER_H */
diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
new file mode 100644
index 000000000..ecb6fd4c3
--- /dev/null
+++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 ARM Limited
+ */
+#ifndef __ASM_VDSO_GETTIMEOFDAY_H
+#define __ASM_VDSO_GETTIMEOFDAY_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/barrier.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+
+#include <asm/vdso/compat_barrier.h>
+
+#define VDSO_HAS_CLOCK_GETRES		1
+
+#define BUILD_VDSO32			1
+
+static __always_inline
+int gettimeofday_fallback(struct __kernel_old_timeval *_tv,
+			  struct timezone *_tz)
+{
+	register struct timezone *tz asm("r1") = _tz;
+	register struct __kernel_old_timeval *tv asm("r0") = _tv;
+	register long ret asm ("r0");
+	register long nr asm("r7") = __NR_compat_gettimeofday;
+
+	asm volatile(
+	"	swi #0\n"
+	: "=r" (ret)
+	: "r" (tv), "r" (tz), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline
+long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
+{
+	register struct __kernel_timespec *ts asm("r1") = _ts;
+	register clockid_t clkid asm("r0") = _clkid;
+	register long ret asm ("r0");
+	register long nr asm("r7") = __NR_compat_clock_gettime64;
+
+	asm volatile(
+	"	swi #0\n"
+	: "=r" (ret)
+	: "r" (clkid), "r" (ts), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline
+long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
+{
+	register struct old_timespec32 *ts asm("r1") = _ts;
+	register clockid_t clkid asm("r0") = _clkid;
+	register long ret asm ("r0");
+	register long nr asm("r7") = __NR_compat_clock_gettime;
+
+	asm volatile(
+	"	swi #0\n"
+	: "=r" (ret)
+	: "r" (clkid), "r" (ts), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline
+int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
+{
+	register struct __kernel_timespec *ts asm("r1") = _ts;
+	register clockid_t clkid asm("r0") = _clkid;
+	register long ret asm ("r0");
+	register long nr asm("r7") = __NR_compat_clock_getres_time64;
+
+	asm volatile(
+	"       swi #0\n"
+	: "=r" (ret)
+	: "r" (clkid), "r" (ts), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline
+int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts)
+{
+	register struct old_timespec32 *ts asm("r1") = _ts;
+	register clockid_t clkid asm("r0") = _clkid;
+	register long ret asm ("r0");
+	register long nr asm("r7") = __NR_compat_clock_getres;
+
+	asm volatile(
+	"       swi #0\n"
+	: "=r" (ret)
+	: "r" (clkid), "r" (ts), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
+						 const struct vdso_data *vd)
+{
+	u64 res;
+
+	/*
+	 * Core checks for mode already, so this raced against a concurrent
+	 * update. Return something. Core will do another round and then
+	 * see the mode change and fallback to the syscall.
+	 */
+	if (clock_mode != VDSO_CLOCKMODE_ARCHTIMER)
+		return 0;
+
+	/*
+	 * This isb() is required to prevent that the counter value
+	 * is speculated.
+	 */
+	isb();
+	asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (res));
+	/*
+	 * This isb() is required to prevent that the seq lock is
+	 * speculated.
+	 */
+	isb();
+
+	return res;
+}
+
+static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
+{
+	const struct vdso_data *ret;
+
+	/*
+	 * This simply puts &_vdso_data into ret. The reason why we don't use
+	 * `ret = _vdso_data` is that the compiler tends to optimise this in a
+	 * very suboptimal way: instead of keeping &_vdso_data in a register,
+	 * it goes through a relocation almost every time _vdso_data must be
+	 * accessed (even in subfunctions). This is both time and space
+	 * consuming: each relocation uses a word in the code section, and it
+	 * has to be loaded at runtime.
+	 *
+	 * This trick hides the assignment from the compiler. Since it cannot
+	 * track where the pointer comes from, it will only use one relocation
+	 * where __arch_get_vdso_data() is called, and then keep the result in
+	 * a register.
+	 */
+	asm volatile("mov %0, %1" : "=r"(ret) : "r"(_vdso_data));
+
+	return ret;
+}
+
+#ifdef CONFIG_TIME_NS
+static __always_inline
+const struct vdso_data *__arch_get_timens_vdso_data(const struct vdso_data *vd)
+{
+	const struct vdso_data *ret;
+
+	/* See __arch_get_vdso_data(). */
+	asm volatile("mov %0, %1" : "=r"(ret) : "r"(_timens_data));
+
+	return ret;
+}
+#endif
+
+static inline bool vdso_clocksource_ok(const struct vdso_data *vd)
+{
+	return vd->clock_mode == VDSO_CLOCKMODE_ARCHTIMER;
+}
+#define vdso_clocksource_ok	vdso_clocksource_ok
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vdso/gettimeofday.h b/arch/arm64/include/asm/vdso/gettimeofday.h
new file mode 100644
index 000000000..764d13e29
--- /dev/null
+++ b/arch/arm64/include/asm/vdso/gettimeofday.h
@@ -0,0 +1,118 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 ARM Limited
+ */
+#ifndef __ASM_VDSO_GETTIMEOFDAY_H
+#define __ASM_VDSO_GETTIMEOFDAY_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/alternative.h>
+#include <asm/barrier.h>
+#include <asm/unistd.h>
+#include <asm/sysreg.h>
+
+#define VDSO_HAS_CLOCK_GETRES		1
+
+static __always_inline
+int gettimeofday_fallback(struct __kernel_old_timeval *_tv,
+			  struct timezone *_tz)
+{
+	register struct timezone *tz asm("x1") = _tz;
+	register struct __kernel_old_timeval *tv asm("x0") = _tv;
+	register long ret asm ("x0");
+	register long nr asm("x8") = __NR_gettimeofday;
+
+	asm volatile(
+	"       svc #0\n"
+	: "=r" (ret)
+	: "r" (tv), "r" (tz), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline
+long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
+{
+	register struct __kernel_timespec *ts asm("x1") = _ts;
+	register clockid_t clkid asm("x0") = _clkid;
+	register long ret asm ("x0");
+	register long nr asm("x8") = __NR_clock_gettime;
+
+	asm volatile(
+	"       svc #0\n"
+	: "=r" (ret)
+	: "r" (clkid), "r" (ts), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline
+int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts)
+{
+	register struct __kernel_timespec *ts asm("x1") = _ts;
+	register clockid_t clkid asm("x0") = _clkid;
+	register long ret asm ("x0");
+	register long nr asm("x8") = __NR_clock_getres;
+
+	asm volatile(
+	"       svc #0\n"
+	: "=r" (ret)
+	: "r" (clkid), "r" (ts), "r" (nr)
+	: "memory");
+
+	return ret;
+}
+
+static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
+						 const struct vdso_data *vd)
+{
+	u64 res;
+
+	/*
+	 * Core checks for mode already, so this raced against a concurrent
+	 * update. Return something. Core will do another round and then
+	 * see the mode change and fallback to the syscall.
+	 */
+	if (clock_mode == VDSO_CLOCKMODE_NONE)
+		return 0;
+
+	/*
+	 * If FEAT_ECV is available, use the self-synchronizing counter.
+	 * Otherwise the isb is required to prevent that the counter value
+	 * is speculated.
+	*/
+	asm volatile(
+	ALTERNATIVE("isb\n"
+		    "mrs %0, cntvct_el0",
+		    "nop\n"
+		    __mrs_s("%0", SYS_CNTVCTSS_EL0),
+		    ARM64_HAS_ECV)
+	: "=r" (res)
+	:
+	: "memory");
+
+	arch_counter_enforce_ordering(res);
+
+	return res;
+}
+
+static __always_inline
+const struct vdso_data *__arch_get_vdso_data(void)
+{
+	return _vdso_data;
+}
+
+#ifdef CONFIG_TIME_NS
+static __always_inline
+const struct vdso_data *__arch_get_timens_vdso_data(const struct vdso_data *vd)
+{
+	return _timens_data;
+}
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vdso/processor.h b/arch/arm64/include/asm/vdso/processor.h
new file mode 100644
index 000000000..ff830b766
--- /dev/null
+++ b/arch/arm64/include/asm/vdso/processor.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#ifndef __ASM_VDSO_PROCESSOR_H
+#define __ASM_VDSO_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+static inline void cpu_relax(void)
+{
+	asm volatile("yield" ::: "memory");
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/vdso/vsyscall.h b/arch/arm64/include/asm/vdso/vsyscall.h
new file mode 100644
index 000000000..f94b1457c
--- /dev/null
+++ b/arch/arm64/include/asm/vdso/vsyscall.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_VDSO_VSYSCALL_H
+#define __ASM_VDSO_VSYSCALL_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/timekeeper_internal.h>
+#include <vdso/datapage.h>
+
+#define VDSO_PRECISION_MASK	~(0xFF00ULL<<48)
+
+extern struct vdso_data *vdso_data;
+
+/*
+ * Update the vDSO data page to keep in sync with kernel timekeeping.
+ */
+static __always_inline
+struct vdso_data *__arm64_get_k_vdso_data(void)
+{
+	return vdso_data;
+}
+#define __arch_get_k_vdso_data __arm64_get_k_vdso_data
+
+static __always_inline
+void __arm64_update_vsyscall(struct vdso_data *vdata, struct timekeeper *tk)
+{
+	vdata[CS_HRES_COARSE].mask	= VDSO_PRECISION_MASK;
+	vdata[CS_RAW].mask		= VDSO_PRECISION_MASK;
+}
+#define __arch_update_vsyscall __arm64_update_vsyscall
+
+/* The asm-generic header needs to be included after the definitions above */
+#include <asm-generic/vdso/vsyscall.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_VDSO_VSYSCALL_H */
diff --git a/arch/arm64/include/asm/vectors.h b/arch/arm64/include/asm/vectors.h
new file mode 100644
index 000000000..bc9a2145f
--- /dev/null
+++ b/arch/arm64/include/asm/vectors.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 ARM Ltd.
+ */
+#ifndef __ASM_VECTORS_H
+#define __ASM_VECTORS_H
+
+#include <linux/bug.h>
+#include <linux/percpu.h>
+
+#include <asm/fixmap.h>
+
+extern char vectors[];
+extern char tramp_vectors[];
+extern char __bp_harden_el1_vectors[];
+
+/*
+ * Note: the order of this enum corresponds to two arrays in entry.S:
+ * tramp_vecs and __bp_harden_el1_vectors. By default the canonical
+ * 'full fat' vectors are used directly.
+ */
+enum arm64_bp_harden_el1_vectors {
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	/*
+	 * Perform the BHB loop mitigation, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_LOOP,
+
+	/*
+	 * Make the SMC call for firmware mitigation, before branching to the
+	 * canonical vectors.
+	 */
+	EL1_VECTOR_BHB_FW,
+
+	/*
+	 * Use the ClearBHB instruction, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_CLEAR_INSN,
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+	/*
+	 * Remap the kernel before branching to the canonical vectors.
+	 */
+	EL1_VECTOR_KPTI,
+};
+
+#ifndef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+#define EL1_VECTOR_BHB_LOOP		-1
+#define EL1_VECTOR_BHB_FW		-1
+#define EL1_VECTOR_BHB_CLEAR_INSN	-1
+#endif /* !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+/* The vectors to use on return from EL0. e.g. to remap the kernel */
+DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
+
+#ifndef CONFIG_UNMAP_KERNEL_AT_EL0
+#define TRAMP_VALIAS	0ul
+#endif
+
+static inline const char *
+arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
+{
+	if (arm64_kernel_unmapped_at_el0())
+		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
+
+	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
+
+	return __bp_harden_el1_vectors + SZ_2K * slot;
+}
+
+#endif /* __ASM_VECTORS_H */
diff --git a/arch/arm64/include/asm/vermagic.h b/arch/arm64/include/asm/vermagic.h
new file mode 100644
index 000000000..a1eec6a00
--- /dev/null
+++ b/arch/arm64/include/asm/vermagic.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC	"aarch64"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
new file mode 100644
index 000000000..261d6e9df
--- /dev/null
+++ b/arch/arm64/include/asm/virt.h
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ASM__VIRT_H
+#define __ASM__VIRT_H
+
+/*
+ * The arm64 hcall implementation uses x0 to specify the hcall
+ * number. A value less than HVC_STUB_HCALL_NR indicates a special
+ * hcall, such as set vector. Any other value is handled in a
+ * hypervisor specific way.
+ *
+ * The hypercall is allowed to clobber any of the caller-saved
+ * registers (x0-x18), so it is advisable to use it through the
+ * indirection of a function call (as implemented in hyp-stub.S).
+ */
+
+/*
+ * HVC_SET_VECTORS - Set the value of the vbar_el2 register.
+ *
+ * @x1: Physical address of the new vector table.
+ */
+#define HVC_SET_VECTORS 0
+
+/*
+ * HVC_SOFT_RESTART - CPU soft reset, used by the cpu_soft_restart routine.
+ */
+#define HVC_SOFT_RESTART 1
+
+/*
+ * HVC_RESET_VECTORS - Restore the vectors to the original HYP stubs
+ */
+#define HVC_RESET_VECTORS 2
+
+/*
+ * HVC_FINALISE_EL2 - Upgrade the CPU from EL1 to EL2, if possible
+ */
+#define HVC_FINALISE_EL2	3
+
+/* Max number of HYP stub hypercalls */
+#define HVC_STUB_HCALL_NR 4
+
+/* Error returned when an invalid stub number is passed into x0 */
+#define HVC_STUB_ERR	0xbadca11
+
+#define BOOT_CPU_MODE_EL1	(0xe11)
+#define BOOT_CPU_MODE_EL2	(0xe12)
+
+/*
+ * Flags returned together with the boot mode, but not preserved in
+ * __boot_cpu_mode. Used by the idreg override code to work out the
+ * boot state.
+ */
+#define BOOT_CPU_FLAG_E2H	BIT_ULL(32)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/sections.h>
+#include <asm/sysreg.h>
+#include <asm/cpufeature.h>
+
+/*
+ * __boot_cpu_mode records what mode CPUs were booted in.
+ * A correctly-implemented bootloader must start all CPUs in the same mode:
+ * In this case, both 32bit halves of __boot_cpu_mode will contain the
+ * same value (either 0 if booted in EL1, BOOT_CPU_MODE_EL2 if booted in EL2).
+ *
+ * Should the bootloader fail to do this, the two values will be different.
+ * This allows the kernel to flag an error when the secondaries have come up.
+ */
+extern u32 __boot_cpu_mode[2];
+
+#define ARM64_VECTOR_TABLE_LEN	SZ_2K
+
+void __hyp_set_vectors(phys_addr_t phys_vector_base);
+void __hyp_reset_vectors(void);
+bool is_kvm_arm_initialised(void);
+
+DECLARE_STATIC_KEY_FALSE(kvm_protected_mode_initialized);
+
+/* Reports the availability of HYP mode */
+static inline bool is_hyp_mode_available(void)
+{
+	/*
+	 * If KVM protected mode is initialized, all CPUs must have been booted
+	 * in EL2. Avoid checking __boot_cpu_mode as CPUs now come up in EL1.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) &&
+	    static_branch_likely(&kvm_protected_mode_initialized))
+		return true;
+
+	return (__boot_cpu_mode[0] == BOOT_CPU_MODE_EL2 &&
+		__boot_cpu_mode[1] == BOOT_CPU_MODE_EL2);
+}
+
+/* Check if the bootloader has booted CPUs in different modes */
+static inline bool is_hyp_mode_mismatched(void)
+{
+	/*
+	 * If KVM protected mode is initialized, all CPUs must have been booted
+	 * in EL2. Avoid checking __boot_cpu_mode as CPUs now come up in EL1.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) &&
+	    static_branch_likely(&kvm_protected_mode_initialized))
+		return false;
+
+	return __boot_cpu_mode[0] != __boot_cpu_mode[1];
+}
+
+static __always_inline bool is_kernel_in_hyp_mode(void)
+{
+	BUILD_BUG_ON(__is_defined(__KVM_NVHE_HYPERVISOR__) ||
+		     __is_defined(__KVM_VHE_HYPERVISOR__));
+	return read_sysreg(CurrentEL) == CurrentEL_EL2;
+}
+
+static __always_inline bool has_vhe(void)
+{
+	/*
+	 * Code only run in VHE/NVHE hyp context can assume VHE is present or
+	 * absent. Otherwise fall back to caps.
+	 * This allows the compiler to discard VHE-specific code from the
+	 * nVHE object, reducing the number of external symbol references
+	 * needed to link.
+	 */
+	if (is_vhe_hyp_code())
+		return true;
+	else if (is_nvhe_hyp_code())
+		return false;
+	else
+		return cpus_have_final_cap(ARM64_HAS_VIRT_HOST_EXTN);
+}
+
+static __always_inline bool is_protected_kvm_enabled(void)
+{
+	if (is_vhe_hyp_code())
+		return false;
+	else
+		return cpus_have_final_cap(ARM64_KVM_PROTECTED_MODE);
+}
+
+static __always_inline bool has_hvhe(void)
+{
+	if (is_vhe_hyp_code())
+		return false;
+
+	return cpus_have_final_cap(ARM64_KVM_HVHE);
+}
+
+static inline bool is_hyp_nvhe(void)
+{
+	return is_hyp_mode_available() && !is_kernel_in_hyp_mode();
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ! __ASM__VIRT_H */
diff --git a/arch/arm64/include/asm/vmalloc.h b/arch/arm64/include/asm/vmalloc.h
new file mode 100644
index 000000000..38fafffe6
--- /dev/null
+++ b/arch/arm64/include/asm/vmalloc.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_ARM64_VMALLOC_H
+#define _ASM_ARM64_VMALLOC_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
+
+#define arch_vmap_pud_supported arch_vmap_pud_supported
+static inline bool arch_vmap_pud_supported(pgprot_t prot)
+{
+	/*
+	 * SW table walks can't handle removal of intermediate entries.
+	 */
+	return pud_sect_supported() &&
+	       !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
+}
+
+#define arch_vmap_pmd_supported arch_vmap_pmd_supported
+static inline bool arch_vmap_pmd_supported(pgprot_t prot)
+{
+	/* See arch_vmap_pud_supported() */
+	return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
+}
+
+#endif
+
+#define arch_vmap_pgprot_tagged arch_vmap_pgprot_tagged
+static inline pgprot_t arch_vmap_pgprot_tagged(pgprot_t prot)
+{
+	return pgprot_tagged(prot);
+}
+
+#endif /* _ASM_ARM64_VMALLOC_H */
diff --git a/arch/arm64/include/asm/vmap_stack.h b/arch/arm64/include/asm/vmap_stack.h
new file mode 100644
index 000000000..20873099c
--- /dev/null
+++ b/arch/arm64/include/asm/vmap_stack.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (C) 2017 Arm Ltd.
+#ifndef __ASM_VMAP_STACK_H
+#define __ASM_VMAP_STACK_H
+
+#include <linux/bug.h>
+#include <linux/gfp.h>
+#include <linux/kconfig.h>
+#include <linux/vmalloc.h>
+#include <linux/pgtable.h>
+#include <asm/memory.h>
+#include <asm/thread_info.h>
+
+/*
+ * To ensure that VMAP'd stack overflow detection works correctly, all VMAP'd
+ * stacks need to have the same alignment.
+ */
+static inline unsigned long *arch_alloc_vmap_stack(size_t stack_size, int node)
+{
+	void *p;
+
+	BUILD_BUG_ON(!IS_ENABLED(CONFIG_VMAP_STACK));
+
+	p = __vmalloc_node(stack_size, THREAD_ALIGN, THREADINFO_GFP, node,
+			__builtin_return_address(0));
+	return kasan_reset_tag(p);
+}
+
+#endif /* __ASM_VMAP_STACK_H */
diff --git a/arch/arm64/include/asm/word-at-a-time.h b/arch/arm64/include/asm/word-at-a-time.h
new file mode 100644
index 000000000..f3b151ed0
--- /dev/null
+++ b/arch/arm64/include/asm/word-at-a-time.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ */
+#ifndef __ASM_WORD_AT_A_TIME_H
+#define __ASM_WORD_AT_A_TIME_H
+
+#include <linux/uaccess.h>
+
+#ifndef __AARCH64EB__
+
+#include <linux/kernel.h>
+
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits,
+				     const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+#define prep_zero_mask(a, bits, c) (bits)
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return fls64(mask) >> 3;
+}
+
+#define zero_bytemask(mask) (mask)
+
+#else	/* __AARCH64EB__ */
+#include <asm-generic/word-at-a-time.h>
+#endif
+
+/*
+ * Load an unaligned word from kernel space.
+ *
+ * In the (very unlikely) case of the word being a page-crosser
+ * and the next page not being mapped, take the exception and
+ * return zeroes in the non-existing part.
+ */
+static inline unsigned long load_unaligned_zeropad(const void *addr)
+{
+	unsigned long ret;
+
+	__mte_enable_tco_async();
+
+	/* Load word from unaligned pointer addr */
+	asm(
+	"1:	ldr	%0, %2\n"
+	"2:\n"
+	_ASM_EXTABLE_LOAD_UNALIGNED_ZEROPAD(1b, 2b, %0, %1)
+	: "=&r" (ret)
+	: "r" (addr), "Q" (*(unsigned long *)addr));
+
+	__mte_disable_tco_async();
+
+	return ret;
+}
+
+#endif /* __ASM_WORD_AT_A_TIME_H */
diff --git a/arch/arm64/include/asm/xen/events.h b/arch/arm64/include/asm/xen/events.h
new file mode 100644
index 000000000..2788e95d0
--- /dev/null
+++ b/arch/arm64/include/asm/xen/events.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_XEN_EVENTS_H
+#define _ASM_ARM64_XEN_EVENTS_H
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+
+enum ipi_vector {
+	XEN_PLACEHOLDER_VECTOR,
+
+	/* Xen IPIs go here */
+	XEN_NR_IPIS,
+};
+
+static inline int xen_irqs_disabled(struct pt_regs *regs)
+{
+	return !interrupts_enabled(regs);
+}
+
+#define xchg_xen_ulong(ptr, val) xchg((ptr), (val))
+
+/* Rebind event channel is supported by default */
+static inline bool xen_support_evtchn_rebind(void)
+{
+	return true;
+}
+
+#endif /* _ASM_ARM64_XEN_EVENTS_H */
diff --git a/arch/arm64/include/asm/xen/hypercall.h b/arch/arm64/include/asm/xen/hypercall.h
new file mode 100644
index 000000000..3522cbaed
--- /dev/null
+++ b/arch/arm64/include/asm/xen/hypercall.h
@@ -0,0 +1 @@
+#include <xen/arm/hypercall.h>
diff --git a/arch/arm64/include/asm/xen/hypervisor.h b/arch/arm64/include/asm/xen/hypervisor.h
new file mode 100644
index 000000000..d6e7709d0
--- /dev/null
+++ b/arch/arm64/include/asm/xen/hypervisor.h
@@ -0,0 +1 @@
+#include <xen/arm/hypervisor.h>
diff --git a/arch/arm64/include/asm/xen/interface.h b/arch/arm64/include/asm/xen/interface.h
new file mode 100644
index 000000000..88c0d75da
--- /dev/null
+++ b/arch/arm64/include/asm/xen/interface.h
@@ -0,0 +1 @@
+#include <xen/arm/interface.h>
diff --git a/arch/arm64/include/asm/xen/page.h b/arch/arm64/include/asm/xen/page.h
new file mode 100644
index 000000000..dffdc7732
--- /dev/null
+++ b/arch/arm64/include/asm/xen/page.h
@@ -0,0 +1,7 @@
+#include <xen/arm/page.h>
+#include <asm/mmu.h>
+
+static inline bool xen_kernel_unmapped_at_usr(void)
+{
+	return arm64_kernel_unmapped_at_el0();
+}
diff --git a/arch/arm64/include/asm/xen/swiotlb-xen.h b/arch/arm64/include/asm/xen/swiotlb-xen.h
new file mode 100644
index 000000000..455ade5d5
--- /dev/null
+++ b/arch/arm64/include/asm/xen/swiotlb-xen.h
@@ -0,0 +1 @@
+#include <xen/arm/swiotlb-xen.h>
diff --git a/arch/arm64/include/asm/xen/xen-ops.h b/arch/arm64/include/asm/xen/xen-ops.h
new file mode 100644
index 000000000..7ebb7eb0b
--- /dev/null
+++ b/arch/arm64/include/asm/xen/xen-ops.h
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <xen/arm/xen-ops.h>
diff --git a/arch/arm64/include/asm/xor.h b/arch/arm64/include/asm/xor.h
new file mode 100644
index 000000000..befcd8a7a
--- /dev/null
+++ b/arch/arm64/include/asm/xor.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/include/asm/xor.h
+ *
+ * Authors: Jackie Liu <liuyun01@kylinos.cn>
+ * Copyright (C) 2018,Tianjin KYLIN Information Technology Co., Ltd.
+ */
+
+#include <linux/hardirq.h>
+#include <asm-generic/xor.h>
+#include <asm/hwcap.h>
+#include <asm/neon.h>
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+extern struct xor_block_template const xor_block_inner_neon;
+
+static void
+xor_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2)
+{
+	kernel_neon_begin();
+	xor_block_inner_neon.do_2(bytes, p1, p2);
+	kernel_neon_end();
+}
+
+static void
+xor_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3)
+{
+	kernel_neon_begin();
+	xor_block_inner_neon.do_3(bytes, p1, p2, p3);
+	kernel_neon_end();
+}
+
+static void
+xor_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4)
+{
+	kernel_neon_begin();
+	xor_block_inner_neon.do_4(bytes, p1, p2, p3, p4);
+	kernel_neon_end();
+}
+
+static void
+xor_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4,
+	   const unsigned long * __restrict p5)
+{
+	kernel_neon_begin();
+	xor_block_inner_neon.do_5(bytes, p1, p2, p3, p4, p5);
+	kernel_neon_end();
+}
+
+static struct xor_block_template xor_block_arm64 = {
+	.name   = "arm64_neon",
+	.do_2   = xor_neon_2,
+	.do_3   = xor_neon_3,
+	.do_4   = xor_neon_4,
+	.do_5	= xor_neon_5
+};
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES           \
+	do {        \
+		xor_speed(&xor_block_8regs);    \
+		xor_speed(&xor_block_32regs);    \
+		if (cpu_has_neon()) { \
+			xor_speed(&xor_block_arm64);\
+		} \
+	} while (0)
+
+#endif /* ! CONFIG_KERNEL_MODE_NEON */
diff --git a/arch/arm64/include/uapi/asm/Kbuild b/arch/arm64/include/uapi/asm/Kbuild
new file mode 100644
index 000000000..602d13793
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/Kbuild
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+generic-y += kvm_para.h
diff --git a/arch/arm64/include/uapi/asm/auxvec.h b/arch/arm64/include/uapi/asm/auxvec.h
new file mode 100644
index 000000000..743c0b84f
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/auxvec.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_AUXVEC_H
+#define __ASM_AUXVEC_H
+
+/* vDSO location */
+#define AT_SYSINFO_EHDR	33
+#define AT_MINSIGSTKSZ	51	/* stack needed for signal delivery */
+
+#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
+
+#endif
diff --git a/arch/arm64/include/uapi/asm/bitsperlong.h b/arch/arm64/include/uapi/asm/bitsperlong.h
new file mode 100644
index 000000000..485d60bee
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_BITSPERLONG_H
+#define __ASM_BITSPERLONG_H
+
+#define __BITS_PER_LONG 64
+
+#include <asm-generic/bitsperlong.h>
+
+#endif	/* __ASM_BITSPERLONG_H */
diff --git a/arch/arm64/include/uapi/asm/bpf_perf_event.h b/arch/arm64/include/uapi/asm/bpf_perf_event.h
new file mode 100644
index 000000000..5e1e648ae
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/bpf_perf_event.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
+#define _UAPI__ASM_BPF_PERF_EVENT_H__
+
+#include <asm/ptrace.h>
+
+typedef struct user_pt_regs bpf_user_pt_regs_t;
+
+#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
diff --git a/arch/arm64/include/uapi/asm/byteorder.h b/arch/arm64/include/uapi/asm/byteorder.h
new file mode 100644
index 000000000..ca9cfdab3
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/byteorder.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_BYTEORDER_H
+#define __ASM_BYTEORDER_H
+
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif	/* __ASM_BYTEORDER_H */
diff --git a/arch/arm64/include/uapi/asm/fcntl.h b/arch/arm64/include/uapi/asm/fcntl.h
new file mode 100644
index 000000000..f8db34f26
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/fcntl.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_FCNTL_H
+#define __ASM_FCNTL_H
+
+/*
+ * Using our own definitions for AArch32 (compat) support.
+ */
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
new file mode 100644
index 000000000..53026f45a
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_HWCAP_H
+#define _UAPI__ASM_HWCAP_H
+
+/*
+ * HWCAP flags - for AT_HWCAP
+ *
+ * Bits 62 and 63 are reserved for use by libc.
+ * Bits 32-61 are unallocated for potential use by libc.
+ */
+#define HWCAP_FP		(1 << 0)
+#define HWCAP_ASIMD		(1 << 1)
+#define HWCAP_EVTSTRM		(1 << 2)
+#define HWCAP_AES		(1 << 3)
+#define HWCAP_PMULL		(1 << 4)
+#define HWCAP_SHA1		(1 << 5)
+#define HWCAP_SHA2		(1 << 6)
+#define HWCAP_CRC32		(1 << 7)
+#define HWCAP_ATOMICS		(1 << 8)
+#define HWCAP_FPHP		(1 << 9)
+#define HWCAP_ASIMDHP		(1 << 10)
+#define HWCAP_CPUID		(1 << 11)
+#define HWCAP_ASIMDRDM		(1 << 12)
+#define HWCAP_JSCVT		(1 << 13)
+#define HWCAP_FCMA		(1 << 14)
+#define HWCAP_LRCPC		(1 << 15)
+#define HWCAP_DCPOP		(1 << 16)
+#define HWCAP_SHA3		(1 << 17)
+#define HWCAP_SM3		(1 << 18)
+#define HWCAP_SM4		(1 << 19)
+#define HWCAP_ASIMDDP		(1 << 20)
+#define HWCAP_SHA512		(1 << 21)
+#define HWCAP_SVE		(1 << 22)
+#define HWCAP_ASIMDFHM		(1 << 23)
+#define HWCAP_DIT		(1 << 24)
+#define HWCAP_USCAT		(1 << 25)
+#define HWCAP_ILRCPC		(1 << 26)
+#define HWCAP_FLAGM		(1 << 27)
+#define HWCAP_SSBS		(1 << 28)
+#define HWCAP_SB		(1 << 29)
+#define HWCAP_PACA		(1 << 30)
+#define HWCAP_PACG		(1UL << 31)
+
+/*
+ * HWCAP2 flags - for AT_HWCAP2
+ */
+#define HWCAP2_DCPODP		(1 << 0)
+#define HWCAP2_SVE2		(1 << 1)
+#define HWCAP2_SVEAES		(1 << 2)
+#define HWCAP2_SVEPMULL		(1 << 3)
+#define HWCAP2_SVEBITPERM	(1 << 4)
+#define HWCAP2_SVESHA3		(1 << 5)
+#define HWCAP2_SVESM4		(1 << 6)
+#define HWCAP2_FLAGM2		(1 << 7)
+#define HWCAP2_FRINT		(1 << 8)
+#define HWCAP2_SVEI8MM		(1 << 9)
+#define HWCAP2_SVEF32MM		(1 << 10)
+#define HWCAP2_SVEF64MM		(1 << 11)
+#define HWCAP2_SVEBF16		(1 << 12)
+#define HWCAP2_I8MM		(1 << 13)
+#define HWCAP2_BF16		(1 << 14)
+#define HWCAP2_DGH		(1 << 15)
+#define HWCAP2_RNG		(1 << 16)
+#define HWCAP2_BTI		(1 << 17)
+#define HWCAP2_MTE		(1 << 18)
+#define HWCAP2_ECV		(1 << 19)
+#define HWCAP2_AFP		(1 << 20)
+#define HWCAP2_RPRES		(1 << 21)
+#define HWCAP2_MTE3		(1 << 22)
+#define HWCAP2_SME		(1 << 23)
+#define HWCAP2_SME_I16I64	(1 << 24)
+#define HWCAP2_SME_F64F64	(1 << 25)
+#define HWCAP2_SME_I8I32	(1 << 26)
+#define HWCAP2_SME_F16F32	(1 << 27)
+#define HWCAP2_SME_B16F32	(1 << 28)
+#define HWCAP2_SME_F32F32	(1 << 29)
+#define HWCAP2_SME_FA64		(1 << 30)
+#define HWCAP2_WFXT		(1UL << 31)
+#define HWCAP2_EBF16		(1UL << 32)
+#define HWCAP2_SVE_EBF16	(1UL << 33)
+#define HWCAP2_CSSC		(1UL << 34)
+#define HWCAP2_RPRFM		(1UL << 35)
+#define HWCAP2_SVE2P1		(1UL << 36)
+#define HWCAP2_SME2		(1UL << 37)
+#define HWCAP2_SME2P1		(1UL << 38)
+#define HWCAP2_SME_I16I32	(1UL << 39)
+#define HWCAP2_SME_BI32I32	(1UL << 40)
+#define HWCAP2_SME_B16B16	(1UL << 41)
+#define HWCAP2_SME_F16F16	(1UL << 42)
+#define HWCAP2_MOPS		(1UL << 43)
+#define HWCAP2_HBC		(1UL << 44)
+
+#endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
new file mode 100644
index 000000000..f7ddd73a8
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -0,0 +1,510 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/include/uapi/asm/kvm.h:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_KVM_H__
+#define __ARM_KVM_H__
+
+#define KVM_SPSR_EL1	0
+#define KVM_SPSR_SVC	KVM_SPSR_EL1
+#define KVM_SPSR_ABT	1
+#define KVM_SPSR_UND	2
+#define KVM_SPSR_IRQ	3
+#define KVM_SPSR_FIQ	4
+#define KVM_NR_SPSR	5
+
+#ifndef __ASSEMBLY__
+#include <linux/psci.h>
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/sve_context.h>
+
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_IRQ_LINE
+#define __KVM_HAVE_READONLY_MEM
+#define __KVM_HAVE_VCPU_EVENTS
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64
+
+#define KVM_REG_SIZE(id)						\
+	(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
+
+struct kvm_regs {
+	struct user_pt_regs regs;	/* sp = sp_el0 */
+
+	__u64	sp_el1;
+	__u64	elr_el1;
+
+	__u64	spsr[KVM_NR_SPSR];
+
+	struct user_fpsimd_state fp_regs;
+};
+
+/*
+ * Supported CPU Targets - Adding a new target type is not recommended,
+ * unless there are some special registers not supported by the
+ * genericv8 syreg table.
+ */
+#define KVM_ARM_TARGET_AEM_V8		0
+#define KVM_ARM_TARGET_FOUNDATION_V8	1
+#define KVM_ARM_TARGET_CORTEX_A57	2
+#define KVM_ARM_TARGET_XGENE_POTENZA	3
+#define KVM_ARM_TARGET_CORTEX_A53	4
+/* Generic ARM v8 target */
+#define KVM_ARM_TARGET_GENERIC_V8	5
+
+#define KVM_ARM_NUM_TARGETS		6
+
+/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
+#define KVM_ARM_DEVICE_TYPE_SHIFT	0
+#define KVM_ARM_DEVICE_TYPE_MASK	GENMASK(KVM_ARM_DEVICE_TYPE_SHIFT + 15, \
+						KVM_ARM_DEVICE_TYPE_SHIFT)
+#define KVM_ARM_DEVICE_ID_SHIFT		16
+#define KVM_ARM_DEVICE_ID_MASK		GENMASK(KVM_ARM_DEVICE_ID_SHIFT + 15, \
+						KVM_ARM_DEVICE_ID_SHIFT)
+
+/* Supported device IDs */
+#define KVM_ARM_DEVICE_VGIC_V2		0
+
+/* Supported VGIC address types  */
+#define KVM_VGIC_V2_ADDR_TYPE_DIST	0
+#define KVM_VGIC_V2_ADDR_TYPE_CPU	1
+
+#define KVM_VGIC_V2_DIST_SIZE		0x1000
+#define KVM_VGIC_V2_CPU_SIZE		0x2000
+
+/* Supported VGICv3 address types  */
+#define KVM_VGIC_V3_ADDR_TYPE_DIST	2
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST	3
+#define KVM_VGIC_ITS_ADDR_TYPE		4
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION	5
+
+#define KVM_VGIC_V3_DIST_SIZE		SZ_64K
+#define KVM_VGIC_V3_REDIST_SIZE		(2 * SZ_64K)
+#define KVM_VGIC_V3_ITS_SIZE		(2 * SZ_64K)
+
+#define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
+#define KVM_ARM_VCPU_EL1_32BIT		1 /* CPU running a 32bit VM */
+#define KVM_ARM_VCPU_PSCI_0_2		2 /* CPU uses PSCI v0.2 */
+#define KVM_ARM_VCPU_PMU_V3		3 /* Support guest PMUv3 */
+#define KVM_ARM_VCPU_SVE		4 /* enable SVE for this CPU */
+#define KVM_ARM_VCPU_PTRAUTH_ADDRESS	5 /* VCPU uses address authentication */
+#define KVM_ARM_VCPU_PTRAUTH_GENERIC	6 /* VCPU uses generic authentication */
+#define KVM_ARM_VCPU_HAS_EL2		7 /* Support nested virtualization */
+
+struct kvm_vcpu_init {
+	__u32 target;
+	__u32 features[7];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+/*
+ * See v8 ARM ARM D7.3: Debug Registers
+ *
+ * The architectural limit is 16 debug registers of each type although
+ * in practice there are usually less (see ID_AA64DFR0_EL1).
+ *
+ * Although the control registers are architecturally defined as 32
+ * bits wide we use a 64 bit structure here to keep parity with
+ * KVM_GET/SET_ONE_REG behaviour which treats all system registers as
+ * 64 bit values. It also allows for the possibility of the
+ * architecture expanding the control registers without having to
+ * change the userspace ABI.
+ */
+#define KVM_ARM_MAX_DBG_REGS 16
+struct kvm_guest_debug_arch {
+	__u64 dbg_bcr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_bvr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_wcr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS];
+};
+
+#define KVM_DEBUG_ARCH_HSR_HIGH_VALID	(1 << 0)
+struct kvm_debug_exit_arch {
+	__u32 hsr;
+	__u32 hsr_high;	/* ESR_EL2[61:32] */
+	__u64 far;	/* used for watchpoints */
+};
+
+/*
+ * Architecture specific defines for kvm_guest_debug->control
+ */
+
+#define KVM_GUESTDBG_USE_SW_BP		(1 << 16)
+#define KVM_GUESTDBG_USE_HW		(1 << 17)
+
+struct kvm_sync_regs {
+	/* Used with KVM_CAP_ARM_USER_IRQ */
+	__u64 device_irq_level;
+};
+
+/*
+ * PMU filter structure. Describe a range of events with a particular
+ * action. To be used with KVM_ARM_VCPU_PMU_V3_FILTER.
+ */
+struct kvm_pmu_event_filter {
+	__u16	base_event;
+	__u16	nevents;
+
+#define KVM_PMU_EVENT_ALLOW	0
+#define KVM_PMU_EVENT_DENY	1
+
+	__u8	action;
+	__u8	pad[3];
+};
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+	struct {
+		__u8 serror_pending;
+		__u8 serror_has_esr;
+		__u8 ext_dabt_pending;
+		/* Align it to 8 bytes */
+		__u8 pad[5];
+		__u64 serror_esr;
+	} exception;
+	__u32 reserved[12];
+};
+
+struct kvm_arm_copy_mte_tags {
+	__u64 guest_ipa;
+	__u64 length;
+	void __user *addr;
+	__u64 flags;
+	__u64 reserved[2];
+};
+
+/*
+ * Counter/Timer offset structure. Describe the virtual/physical offset.
+ * To be used with KVM_ARM_SET_COUNTER_OFFSET.
+ */
+struct kvm_arm_counter_offset {
+	__u64 counter_offset;
+	__u64 reserved;
+};
+
+#define KVM_ARM_TAGS_TO_GUEST		0
+#define KVM_ARM_TAGS_FROM_GUEST		1
+
+/* If you need to interpret the index values, here is the key: */
+#define KVM_REG_ARM_COPROC_MASK		0x000000000FFF0000
+#define KVM_REG_ARM_COPROC_SHIFT	16
+
+/* Normal registers are mapped as coprocessor 16. */
+#define KVM_REG_ARM_CORE		(0x0010 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_CORE_REG(name)	(offsetof(struct kvm_regs, name) / sizeof(__u32))
+
+/* Some registers need more space to represent values. */
+#define KVM_REG_ARM_DEMUX		(0x0011 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_DEMUX_ID_MASK	0x000000000000FF00
+#define KVM_REG_ARM_DEMUX_ID_SHIFT	8
+#define KVM_REG_ARM_DEMUX_ID_CCSIDR	(0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT)
+#define KVM_REG_ARM_DEMUX_VAL_MASK	0x00000000000000FF
+#define KVM_REG_ARM_DEMUX_VAL_SHIFT	0
+
+/* AArch64 system registers */
+#define KVM_REG_ARM64_SYSREG		(0x0013 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM64_SYSREG_OP0_MASK	0x000000000000c000
+#define KVM_REG_ARM64_SYSREG_OP0_SHIFT	14
+#define KVM_REG_ARM64_SYSREG_OP1_MASK	0x0000000000003800
+#define KVM_REG_ARM64_SYSREG_OP1_SHIFT	11
+#define KVM_REG_ARM64_SYSREG_CRN_MASK	0x0000000000000780
+#define KVM_REG_ARM64_SYSREG_CRN_SHIFT	7
+#define KVM_REG_ARM64_SYSREG_CRM_MASK	0x0000000000000078
+#define KVM_REG_ARM64_SYSREG_CRM_SHIFT	3
+#define KVM_REG_ARM64_SYSREG_OP2_MASK	0x0000000000000007
+#define KVM_REG_ARM64_SYSREG_OP2_SHIFT	0
+
+#define ARM64_SYS_REG_SHIFT_MASK(x,n) \
+	(((x) << KVM_REG_ARM64_SYSREG_ ## n ## _SHIFT) & \
+	KVM_REG_ARM64_SYSREG_ ## n ## _MASK)
+
+#define __ARM64_SYS_REG(op0,op1,crn,crm,op2) \
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SYSREG | \
+	ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \
+	ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \
+	ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \
+	ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \
+	ARM64_SYS_REG_SHIFT_MASK(op2, OP2))
+
+#define ARM64_SYS_REG(...) (__ARM64_SYS_REG(__VA_ARGS__) | KVM_REG_SIZE_U64)
+
+/* Physical Timer EL0 Registers */
+#define KVM_REG_ARM_PTIMER_CTL		ARM64_SYS_REG(3, 3, 14, 2, 1)
+#define KVM_REG_ARM_PTIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 2, 2)
+#define KVM_REG_ARM_PTIMER_CNT		ARM64_SYS_REG(3, 3, 14, 0, 1)
+
+/*
+ * EL0 Virtual Timer Registers
+ *
+ * WARNING:
+ *      KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT are not defined
+ *      with the appropriate register encodings.  Their values have been
+ *      accidentally swapped.  As this is set API, the definitions here
+ *      must be used, rather than ones derived from the encodings.
+ */
+#define KVM_REG_ARM_TIMER_CTL		ARM64_SYS_REG(3, 3, 14, 3, 1)
+#define KVM_REG_ARM_TIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 0, 2)
+#define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
+
+/* KVM-as-firmware specific pseudo-registers */
+#define KVM_REG_ARM_FW			(0x0014 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_REG(r)		(KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+					 KVM_REG_ARM_FW | ((r) & 0xffff))
+#define KVM_REG_ARM_PSCI_VERSION	KVM_REG_ARM_FW_REG(0)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1	KVM_REG_ARM_FW_REG(1)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED	2
+
+/*
+ * Only two states can be presented by the host kernel:
+ * - NOT_REQUIRED: the guest doesn't need to do anything
+ * - NOT_AVAIL: the guest isn't mitigated (it can still use SSBS if available)
+ *
+ * All the other values are deprecated. The host still accepts all
+ * values (they are ABI), but will narrow them to the above two.
+ */
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2	KVM_REG_ARM_FW_REG(2)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL		2
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED     	(1U << 4)
+
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3	KVM_REG_ARM_FW_REG(3)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED	2
+
+/* SVE registers */
+#define KVM_REG_ARM64_SVE		(0x15 << KVM_REG_ARM_COPROC_SHIFT)
+
+/* Z- and P-regs occupy blocks at the following offsets within this range: */
+#define KVM_REG_ARM64_SVE_ZREG_BASE	0
+#define KVM_REG_ARM64_SVE_PREG_BASE	0x400
+#define KVM_REG_ARM64_SVE_FFR_BASE	0x600
+
+#define KVM_ARM64_SVE_NUM_ZREGS		__SVE_NUM_ZREGS
+#define KVM_ARM64_SVE_NUM_PREGS		__SVE_NUM_PREGS
+
+#define KVM_ARM64_SVE_MAX_SLICES	32
+
+#define KVM_REG_ARM64_SVE_ZREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \
+	 KVM_REG_SIZE_U2048 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_PREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_FFR(i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+/*
+ * Register values for KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() and
+ * KVM_REG_ARM64_SVE_FFR() are represented in memory in an endianness-
+ * invariant layout which differs from the layout used for the FPSIMD
+ * V-registers on big-endian systems: see sigcontext.h for more explanation.
+ */
+
+#define KVM_ARM64_SVE_VQ_MIN __SVE_VQ_MIN
+#define KVM_ARM64_SVE_VQ_MAX __SVE_VQ_MAX
+
+/* Vector lengths pseudo-register: */
+#define KVM_REG_ARM64_SVE_VLS		(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
+					 KVM_REG_SIZE_U512 | 0xffff)
+#define KVM_ARM64_SVE_VLS_WORDS	\
+	((KVM_ARM64_SVE_VQ_MAX - KVM_ARM64_SVE_VQ_MIN) / 64 + 1)
+
+/* Bitmap feature firmware registers */
+#define KVM_REG_ARM_FW_FEAT_BMAP		(0x0016 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_FEAT_BMAP_REG(r)		(KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+						KVM_REG_ARM_FW_FEAT_BMAP |	\
+						((r) & 0xffff))
+
+#define KVM_REG_ARM_STD_BMAP			KVM_REG_ARM_FW_FEAT_BMAP_REG(0)
+
+enum {
+	KVM_REG_ARM_STD_BIT_TRNG_V1_0	= 0,
+#ifdef __KERNEL__
+	KVM_REG_ARM_STD_BMAP_BIT_COUNT,
+#endif
+};
+
+#define KVM_REG_ARM_STD_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(1)
+
+enum {
+	KVM_REG_ARM_STD_HYP_BIT_PV_TIME	= 0,
+#ifdef __KERNEL__
+	KVM_REG_ARM_STD_HYP_BMAP_BIT_COUNT,
+#endif
+};
+
+#define KVM_REG_ARM_VENDOR_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(2)
+
+enum {
+	KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT	= 0,
+	KVM_REG_ARM_VENDOR_HYP_BIT_PTP		= 1,
+#ifdef __KERNEL__
+	KVM_REG_ARM_VENDOR_HYP_BMAP_BIT_COUNT,
+#endif
+};
+
+/* Device Control API on vm fd */
+#define KVM_ARM_VM_SMCCC_CTRL		0
+#define   KVM_ARM_VM_SMCCC_FILTER	0
+
+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR	0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS	2
+#define   KVM_DEV_ARM_VGIC_CPUID_SHIFT	32
+#define   KVM_DEV_ARM_VGIC_CPUID_MASK	(0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define   KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32
+#define   KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \
+			(0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT)
+#define   KVM_DEV_ARM_VGIC_OFFSET_SHIFT	0
+#define   KVM_DEV_ARM_VGIC_OFFSET_MASK	(0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+#define   KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff)
+#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS	3
+#define KVM_DEV_ARM_VGIC_GRP_CTRL	4
+#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
+#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
+#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO  7
+#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
+#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT	10
+#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
+			(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
+#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK	0x3ff
+#define VGIC_LEVEL_INFO_LINE_LEVEL	0
+
+#define   KVM_DEV_ARM_VGIC_CTRL_INIT		0
+#define   KVM_DEV_ARM_ITS_SAVE_TABLES           1
+#define   KVM_DEV_ARM_ITS_RESTORE_TABLES        2
+#define   KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES	3
+#define   KVM_DEV_ARM_ITS_CTRL_RESET		4
+
+/* Device Control API on vcpu fd */
+#define KVM_ARM_VCPU_PMU_V3_CTRL	0
+#define   KVM_ARM_VCPU_PMU_V3_IRQ	0
+#define   KVM_ARM_VCPU_PMU_V3_INIT	1
+#define   KVM_ARM_VCPU_PMU_V3_FILTER	2
+#define   KVM_ARM_VCPU_PMU_V3_SET_PMU	3
+#define KVM_ARM_VCPU_TIMER_CTRL		1
+#define   KVM_ARM_VCPU_TIMER_IRQ_VTIMER		0
+#define   KVM_ARM_VCPU_TIMER_IRQ_PTIMER		1
+#define   KVM_ARM_VCPU_TIMER_IRQ_HVTIMER	2
+#define   KVM_ARM_VCPU_TIMER_IRQ_HPTIMER	3
+#define KVM_ARM_VCPU_PVTIME_CTRL	2
+#define   KVM_ARM_VCPU_PVTIME_IPA	0
+
+/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_VCPU2_SHIFT		28
+#define KVM_ARM_IRQ_VCPU2_MASK		0xf
+#define KVM_ARM_IRQ_TYPE_SHIFT		24
+#define KVM_ARM_IRQ_TYPE_MASK		0xf
+#define KVM_ARM_IRQ_VCPU_SHIFT		16
+#define KVM_ARM_IRQ_VCPU_MASK		0xff
+#define KVM_ARM_IRQ_NUM_SHIFT		0
+#define KVM_ARM_IRQ_NUM_MASK		0xffff
+
+/* irq_type field */
+#define KVM_ARM_IRQ_TYPE_CPU		0
+#define KVM_ARM_IRQ_TYPE_SPI		1
+#define KVM_ARM_IRQ_TYPE_PPI		2
+
+/* out-of-kernel GIC cpu interrupt injection irq_number field */
+#define KVM_ARM_IRQ_CPU_IRQ		0
+#define KVM_ARM_IRQ_CPU_FIQ		1
+
+/*
+ * This used to hold the highest supported SPI, but it is now obsolete
+ * and only here to provide source code level compatibility with older
+ * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS.
+ */
+#ifndef __KERNEL__
+#define KVM_ARM_IRQ_GIC_MAX		127
+#endif
+
+/* One single KVM irqchip, ie. the VGIC */
+#define KVM_NR_IRQCHIPS          1
+
+/* PSCI interface */
+#define KVM_PSCI_FN_BASE		0x95c1ba5e
+#define KVM_PSCI_FN(n)			(KVM_PSCI_FN_BASE + (n))
+
+#define KVM_PSCI_FN_CPU_SUSPEND		KVM_PSCI_FN(0)
+#define KVM_PSCI_FN_CPU_OFF		KVM_PSCI_FN(1)
+#define KVM_PSCI_FN_CPU_ON		KVM_PSCI_FN(2)
+#define KVM_PSCI_FN_MIGRATE		KVM_PSCI_FN(3)
+
+#define KVM_PSCI_RET_SUCCESS		PSCI_RET_SUCCESS
+#define KVM_PSCI_RET_NI			PSCI_RET_NOT_SUPPORTED
+#define KVM_PSCI_RET_INVAL		PSCI_RET_INVALID_PARAMS
+#define KVM_PSCI_RET_DENIED		PSCI_RET_DENIED
+
+/* arm64-specific kvm_run::system_event flags */
+/*
+ * Reset caused by a PSCI v1.1 SYSTEM_RESET2 call.
+ * Valid only when the system event has a type of KVM_SYSTEM_EVENT_RESET.
+ */
+#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2	(1ULL << 0)
+
+/* run->fail_entry.hardware_entry_failure_reason codes. */
+#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED	(1ULL << 0)
+
+enum kvm_smccc_filter_action {
+	KVM_SMCCC_FILTER_HANDLE = 0,
+	KVM_SMCCC_FILTER_DENY,
+	KVM_SMCCC_FILTER_FWD_TO_USER,
+
+#ifdef __KERNEL__
+	NR_SMCCC_FILTER_ACTIONS
+#endif
+};
+
+struct kvm_smccc_filter {
+	__u32 base;
+	__u32 nr_functions;
+	__u8 action;
+	__u8 pad[15];
+};
+
+/* arm64-specific KVM_EXIT_HYPERCALL flags */
+#define KVM_HYPERCALL_EXIT_SMC		(1U << 0)
+#define KVM_HYPERCALL_EXIT_16BIT	(1U << 1)
+
+#endif
+
+#endif /* __ARM_KVM_H__ */
diff --git a/arch/arm64/include/uapi/asm/mman.h b/arch/arm64/include/uapi/asm/mman.h
new file mode 100644
index 000000000..1e6482a83
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/mman.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_MMAN_H
+#define _UAPI__ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define PROT_BTI	0x10		/* BTI guarded page */
+#define PROT_MTE	0x20		/* Normal Tagged mapping */
+
+#endif /* ! _UAPI__ASM_MMAN_H */
diff --git a/arch/arm64/include/uapi/asm/param.h b/arch/arm64/include/uapi/asm/param.h
new file mode 100644
index 000000000..b115c5557
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/param.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#define EXEC_PAGESIZE	65536
+
+#include <asm-generic/param.h>
+
+#endif
diff --git a/arch/arm64/include/uapi/asm/perf_regs.h b/arch/arm64/include/uapi/asm/perf_regs.h
new file mode 100644
index 000000000..86e556429
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/perf_regs.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_ARM64_PERF_REGS_H
+#define _ASM_ARM64_PERF_REGS_H
+
+enum perf_event_arm_regs {
+	PERF_REG_ARM64_X0,
+	PERF_REG_ARM64_X1,
+	PERF_REG_ARM64_X2,
+	PERF_REG_ARM64_X3,
+	PERF_REG_ARM64_X4,
+	PERF_REG_ARM64_X5,
+	PERF_REG_ARM64_X6,
+	PERF_REG_ARM64_X7,
+	PERF_REG_ARM64_X8,
+	PERF_REG_ARM64_X9,
+	PERF_REG_ARM64_X10,
+	PERF_REG_ARM64_X11,
+	PERF_REG_ARM64_X12,
+	PERF_REG_ARM64_X13,
+	PERF_REG_ARM64_X14,
+	PERF_REG_ARM64_X15,
+	PERF_REG_ARM64_X16,
+	PERF_REG_ARM64_X17,
+	PERF_REG_ARM64_X18,
+	PERF_REG_ARM64_X19,
+	PERF_REG_ARM64_X20,
+	PERF_REG_ARM64_X21,
+	PERF_REG_ARM64_X22,
+	PERF_REG_ARM64_X23,
+	PERF_REG_ARM64_X24,
+	PERF_REG_ARM64_X25,
+	PERF_REG_ARM64_X26,
+	PERF_REG_ARM64_X27,
+	PERF_REG_ARM64_X28,
+	PERF_REG_ARM64_X29,
+	PERF_REG_ARM64_LR,
+	PERF_REG_ARM64_SP,
+	PERF_REG_ARM64_PC,
+	PERF_REG_ARM64_MAX,
+
+	/* Extended/pseudo registers */
+	PERF_REG_ARM64_VG = 46,				/* SVE Vector Granule */
+	PERF_REG_ARM64_EXTENDED_MAX
+};
+
+#define PERF_REG_EXTENDED_MASK	(1ULL << PERF_REG_ARM64_VG)
+
+#endif /* _ASM_ARM64_PERF_REGS_H */
diff --git a/arch/arm64/include/uapi/asm/posix_types.h b/arch/arm64/include/uapi/asm/posix_types.h
new file mode 100644
index 000000000..b1c2e0df9
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/posix_types.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef __ASM_POSIX_TYPES_H
+#define __ASM_POSIX_TYPES_H
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+#define __kernel_old_uid_t __kernel_old_uid_t
+
+#include <asm-generic/posix_types.h>
+
+#endif /*  __ASM_POSIX_TYPES_H */
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
new file mode 100644
index 000000000..7fa2f7036
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -0,0 +1,329 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Based on arch/arm/include/asm/ptrace.h
+ *
+ * Copyright (C) 1996-2003 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_PTRACE_H
+#define _UAPI__ASM_PTRACE_H
+
+#include <linux/types.h>
+
+#include <asm/hwcap.h>
+#include <asm/sve_context.h>
+
+
+/*
+ * PSR bits
+ */
+#define PSR_MODE_EL0t	0x00000000
+#define PSR_MODE_EL1t	0x00000004
+#define PSR_MODE_EL1h	0x00000005
+#define PSR_MODE_EL2t	0x00000008
+#define PSR_MODE_EL2h	0x00000009
+#define PSR_MODE_EL3t	0x0000000c
+#define PSR_MODE_EL3h	0x0000000d
+#define PSR_MODE_MASK	0x0000000f
+
+/* AArch32 CPSR bits */
+#define PSR_MODE32_BIT		0x00000010
+
+/* AArch64 SPSR bits */
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_D_BIT	0x00000200
+#define PSR_BTYPE_MASK	0x00000c00
+#define PSR_SSBS_BIT	0x00001000
+#define PSR_PAN_BIT	0x00400000
+#define PSR_UAO_BIT	0x00800000
+#define PSR_DIT_BIT	0x01000000
+#define PSR_TCO_BIT	0x02000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+
+#define PSR_BTYPE_SHIFT		10
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+/* Convenience names for the values of PSTATE.BTYPE */
+#define PSR_BTYPE_NONE		(0b00 << PSR_BTYPE_SHIFT)
+#define PSR_BTYPE_JC		(0b01 << PSR_BTYPE_SHIFT)
+#define PSR_BTYPE_C		(0b10 << PSR_BTYPE_SHIFT)
+#define PSR_BTYPE_J		(0b11 << PSR_BTYPE_SHIFT)
+
+/* syscall emulation path in ptrace */
+#define PTRACE_SYSEMU		  31
+#define PTRACE_SYSEMU_SINGLESTEP  32
+/* MTE allocation tag access */
+#define PTRACE_PEEKMTETAGS	  33
+#define PTRACE_POKEMTETAGS	  34
+
+#ifndef __ASSEMBLY__
+
+/*
+ * User structures for general purpose, floating point and debug registers.
+ */
+struct user_pt_regs {
+	__u64		regs[31];
+	__u64		sp;
+	__u64		pc;
+	__u64		pstate;
+};
+
+struct user_fpsimd_state {
+	__uint128_t	vregs[32];
+	__u32		fpsr;
+	__u32		fpcr;
+	__u32		__reserved[2];
+};
+
+struct user_hwdebug_state {
+	__u32		dbg_info;
+	__u32		pad;
+	struct {
+		__u64	addr;
+		__u32	ctrl;
+		__u32	pad;
+	}		dbg_regs[16];
+};
+
+/* SVE/FP/SIMD state (NT_ARM_SVE & NT_ARM_SSVE) */
+
+struct user_sve_header {
+	__u32 size; /* total meaningful regset content in bytes */
+	__u32 max_size; /* maxmium possible size for this thread */
+	__u16 vl; /* current vector length */
+	__u16 max_vl; /* maximum possible vector length */
+	__u16 flags;
+	__u16 __reserved;
+};
+
+/* Definitions for user_sve_header.flags: */
+#define SVE_PT_REGS_MASK		(1 << 0)
+
+#define SVE_PT_REGS_FPSIMD		0
+#define SVE_PT_REGS_SVE			SVE_PT_REGS_MASK
+
+/*
+ * Common SVE_PT_* flags:
+ * These must be kept in sync with prctl interface in <linux/prctl.h>
+ */
+#define SVE_PT_VL_INHERIT		((1 << 17) /* PR_SVE_VL_INHERIT */ >> 16)
+#define SVE_PT_VL_ONEXEC		((1 << 18) /* PR_SVE_SET_VL_ONEXEC */ >> 16)
+
+
+/*
+ * The remainder of the SVE state follows struct user_sve_header.  The
+ * total size of the SVE state (including header) depends on the
+ * metadata in the header:  SVE_PT_SIZE(vq, flags) gives the total size
+ * of the state in bytes, including the header.
+ *
+ * Refer to <asm/sigcontext.h> for details of how to pass the correct
+ * "vq" argument to these macros.
+ */
+
+/* Offset from the start of struct user_sve_header to the register data */
+#define SVE_PT_REGS_OFFSET						\
+	((sizeof(struct user_sve_header) + (__SVE_VQ_BYTES - 1))	\
+		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+
+/*
+ * The register data content and layout depends on the value of the
+ * flags field.
+ */
+
+/*
+ * (flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD case:
+ *
+ * The payload starts at offset SVE_PT_FPSIMD_OFFSET, and is of type
+ * struct user_fpsimd_state.  Additional data might be appended in the
+ * future: use SVE_PT_FPSIMD_SIZE(vq, flags) to compute the total size.
+ * SVE_PT_FPSIMD_SIZE(vq, flags) will never be less than
+ * sizeof(struct user_fpsimd_state).
+ */
+
+#define SVE_PT_FPSIMD_OFFSET		SVE_PT_REGS_OFFSET
+
+#define SVE_PT_FPSIMD_SIZE(vq, flags)	(sizeof(struct user_fpsimd_state))
+
+/*
+ * (flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE case:
+ *
+ * The payload starts at offset SVE_PT_SVE_OFFSET, and is of size
+ * SVE_PT_SVE_SIZE(vq, flags).
+ *
+ * Additional macros describe the contents and layout of the payload.
+ * For each, SVE_PT_SVE_x_OFFSET(args) is the start offset relative to
+ * the start of struct user_sve_header, and SVE_PT_SVE_x_SIZE(args) is
+ * the size in bytes:
+ *
+ *	x	type				description
+ *	-	----				-----------
+ *	ZREGS		\
+ *	ZREG		|
+ *	PREGS		| refer to <asm/sigcontext.h>
+ *	PREG		|
+ *	FFR		/
+ *
+ *	FPSR	uint32_t			FPSR
+ *	FPCR	uint32_t			FPCR
+ *
+ * Additional data might be appended in the future.
+ *
+ * The Z-, P- and FFR registers are represented in memory in an endianness-
+ * invariant layout which differs from the layout used for the FPSIMD
+ * V-registers on big-endian systems: see sigcontext.h for more explanation.
+ */
+
+#define SVE_PT_SVE_ZREG_SIZE(vq)	__SVE_ZREG_SIZE(vq)
+#define SVE_PT_SVE_PREG_SIZE(vq)	__SVE_PREG_SIZE(vq)
+#define SVE_PT_SVE_FFR_SIZE(vq)		__SVE_FFR_SIZE(vq)
+#define SVE_PT_SVE_FPSR_SIZE		sizeof(__u32)
+#define SVE_PT_SVE_FPCR_SIZE		sizeof(__u32)
+
+#define SVE_PT_SVE_OFFSET		SVE_PT_REGS_OFFSET
+
+#define SVE_PT_SVE_ZREGS_OFFSET \
+	(SVE_PT_REGS_OFFSET + __SVE_ZREGS_OFFSET)
+#define SVE_PT_SVE_ZREG_OFFSET(vq, n) \
+	(SVE_PT_REGS_OFFSET + __SVE_ZREG_OFFSET(vq, n))
+#define SVE_PT_SVE_ZREGS_SIZE(vq) \
+	(SVE_PT_SVE_ZREG_OFFSET(vq, __SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
+
+#define SVE_PT_SVE_PREGS_OFFSET(vq) \
+	(SVE_PT_REGS_OFFSET + __SVE_PREGS_OFFSET(vq))
+#define SVE_PT_SVE_PREG_OFFSET(vq, n) \
+	(SVE_PT_REGS_OFFSET + __SVE_PREG_OFFSET(vq, n))
+#define SVE_PT_SVE_PREGS_SIZE(vq) \
+	(SVE_PT_SVE_PREG_OFFSET(vq, __SVE_NUM_PREGS) - \
+		SVE_PT_SVE_PREGS_OFFSET(vq))
+
+/* For streaming mode SVE (SSVE) FFR must be read and written as zero */
+#define SVE_PT_SVE_FFR_OFFSET(vq) \
+	(SVE_PT_REGS_OFFSET + __SVE_FFR_OFFSET(vq))
+
+#define SVE_PT_SVE_FPSR_OFFSET(vq)				\
+	((SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq) +	\
+			(__SVE_VQ_BYTES - 1))			\
+		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+#define SVE_PT_SVE_FPCR_OFFSET(vq) \
+	(SVE_PT_SVE_FPSR_OFFSET(vq) + SVE_PT_SVE_FPSR_SIZE)
+
+/*
+ * Any future extension appended after FPCR must be aligned to the next
+ * 128-bit boundary.
+ */
+
+#define SVE_PT_SVE_SIZE(vq, flags)					\
+	((SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE		\
+			- SVE_PT_SVE_OFFSET + (__SVE_VQ_BYTES - 1))	\
+		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+
+#define SVE_PT_SIZE(vq, flags)						  \
+	 (((flags) & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE ?		  \
+		  SVE_PT_SVE_OFFSET + SVE_PT_SVE_SIZE(vq, flags)	  \
+		: ((((flags) & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD ?  \
+		    SVE_PT_FPSIMD_OFFSET + SVE_PT_FPSIMD_SIZE(vq, flags) \
+		  : SVE_PT_REGS_OFFSET)))
+
+/* pointer authentication masks (NT_ARM_PAC_MASK) */
+
+struct user_pac_mask {
+	__u64		data_mask;
+	__u64		insn_mask;
+};
+
+/* pointer authentication keys (NT_ARM_PACA_KEYS, NT_ARM_PACG_KEYS) */
+
+struct user_pac_address_keys {
+	__uint128_t	apiakey;
+	__uint128_t	apibkey;
+	__uint128_t	apdakey;
+	__uint128_t	apdbkey;
+};
+
+struct user_pac_generic_keys {
+	__uint128_t	apgakey;
+};
+
+/* ZA state (NT_ARM_ZA) */
+
+struct user_za_header {
+	__u32 size; /* total meaningful regset content in bytes */
+	__u32 max_size; /* maxmium possible size for this thread */
+	__u16 vl; /* current vector length */
+	__u16 max_vl; /* maximum possible vector length */
+	__u16 flags;
+	__u16 __reserved;
+};
+
+/*
+ * Common ZA_PT_* flags:
+ * These must be kept in sync with prctl interface in <linux/prctl.h>
+ */
+#define ZA_PT_VL_INHERIT		((1 << 17) /* PR_SME_VL_INHERIT */ >> 16)
+#define ZA_PT_VL_ONEXEC			((1 << 18) /* PR_SME_SET_VL_ONEXEC */ >> 16)
+
+
+/*
+ * The remainder of the ZA state follows struct user_za_header.  The
+ * total size of the ZA state (including header) depends on the
+ * metadata in the header:  ZA_PT_SIZE(vq, flags) gives the total size
+ * of the state in bytes, including the header.
+ *
+ * Refer to <asm/sigcontext.h> for details of how to pass the correct
+ * "vq" argument to these macros.
+ */
+
+/* Offset from the start of struct user_za_header to the register data */
+#define ZA_PT_ZA_OFFSET						\
+	((sizeof(struct user_za_header) + (__SVE_VQ_BYTES - 1))	\
+		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+
+/*
+ * The payload starts at offset ZA_PT_ZA_OFFSET, and is of size
+ * ZA_PT_ZA_SIZE(vq, flags).
+ *
+ * The ZA array is stored as a sequence of horizontal vectors ZAV of SVL/8
+ * bytes each, starting from vector 0.
+ *
+ * Additional data might be appended in the future.
+ *
+ * The ZA matrix is represented in memory in an endianness-invariant layout
+ * which differs from the layout used for the FPSIMD V-registers on big-endian
+ * systems: see sigcontext.h for more explanation.
+ */
+
+#define ZA_PT_ZAV_OFFSET(vq, n) \
+	(ZA_PT_ZA_OFFSET + ((vq * __SVE_VQ_BYTES) * n))
+
+#define ZA_PT_ZA_SIZE(vq) ((vq * __SVE_VQ_BYTES) * (vq * __SVE_VQ_BYTES))
+
+#define ZA_PT_SIZE(vq)						\
+	(ZA_PT_ZA_OFFSET + ZA_PT_ZA_SIZE(vq))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI__ASM_PTRACE_H */
diff --git a/arch/arm64/include/uapi/asm/setup.h b/arch/arm64/include/uapi/asm/setup.h
new file mode 100644
index 000000000..5d703888f
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/setup.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Based on arch/arm/include/asm/setup.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SETUP_H
+#define __ASM_SETUP_H
+
+#include <linux/types.h>
+
+#define COMMAND_LINE_SIZE	2048
+
+#endif
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
new file mode 100644
index 000000000..f23c1dc3f
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -0,0 +1,334 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_SIGCONTEXT_H
+#define _UAPI__ASM_SIGCONTEXT_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.
+ */
+struct sigcontext {
+	__u64 fault_address;
+	/* AArch64 registers */
+	__u64 regs[31];
+	__u64 sp;
+	__u64 pc;
+	__u64 pstate;
+	/* 4K reserved for FP/SIMD state and future expansion */
+	__u8 __reserved[4096] __attribute__((__aligned__(16)));
+};
+
+/*
+ * Allocation of __reserved[]:
+ * (Note: records do not necessarily occur in the order shown here.)
+ *
+ *	size		description
+ *
+ *	0x210		fpsimd_context
+ *	 0x10		esr_context
+ *	0x8a0		sve_context (vl <= 64) (optional)
+ *	 0x20		extra_context (optional)
+ *	 0x10		terminator (null _aarch64_ctx)
+ *
+ *	0x510		(reserved for future allocation)
+ *
+ * New records that can exceed this space need to be opt-in for userspace, so
+ * that an expanded signal frame is not generated unexpectedly.  The mechanism
+ * for opting in will depend on the extension that generates each new record.
+ * The above table documents the maximum set and sizes of records than can be
+ * generated when userspace does not opt in for any such extension.
+ */
+
+/*
+ * Header to be used at the beginning of structures extending the user
+ * context. Such structures must be placed after the rt_sigframe on the stack
+ * and be 16-byte aligned. The last structure must be a dummy one with the
+ * magic and size set to 0.
+ *
+ * Note that the values allocated for use as magic should be chosen to
+ * be meaningful in ASCII to aid manual parsing, ZA doesn't follow this
+ * convention due to oversight but it should be observed for future additions.
+ */
+struct _aarch64_ctx {
+	__u32 magic;
+	__u32 size;
+};
+
+#define FPSIMD_MAGIC	0x46508001
+
+struct fpsimd_context {
+	struct _aarch64_ctx head;
+	__u32 fpsr;
+	__u32 fpcr;
+	__uint128_t vregs[32];
+};
+
+/*
+ * Note: similarly to all other integer fields, each V-register is stored in an
+ * endianness-dependent format, with the byte at offset i from the start of the
+ * in-memory representation of the register value containing
+ *
+ *    bits [(7 + 8 * i) : (8 * i)] of the register on little-endian hosts; or
+ *    bits [(127 - 8 * i) : (120 - 8 * i)] on big-endian hosts.
+ */
+
+/* ESR_EL1 context */
+#define ESR_MAGIC	0x45535201
+
+struct esr_context {
+	struct _aarch64_ctx head;
+	__u64 esr;
+};
+
+/*
+ * extra_context: describes extra space in the signal frame for
+ * additional structures that don't fit in sigcontext.__reserved[].
+ *
+ * Note:
+ *
+ * 1) fpsimd_context, esr_context and extra_context must be placed in
+ * sigcontext.__reserved[] if present.  They cannot be placed in the
+ * extra space.  Any other record can be placed either in the extra
+ * space or in sigcontext.__reserved[], unless otherwise specified in
+ * this file.
+ *
+ * 2) There must not be more than one extra_context.
+ *
+ * 3) If extra_context is present, it must be followed immediately in
+ * sigcontext.__reserved[] by the terminating null _aarch64_ctx.
+ *
+ * 4) The extra space to which datap points must start at the first
+ * 16-byte aligned address immediately after the terminating null
+ * _aarch64_ctx that follows the extra_context structure in
+ * __reserved[].  The extra space may overrun the end of __reserved[],
+ * as indicated by a sufficiently large value for the size field.
+ *
+ * 5) The extra space must itself be terminated with a null
+ * _aarch64_ctx.
+ */
+#define EXTRA_MAGIC	0x45585401
+
+struct extra_context {
+	struct _aarch64_ctx head;
+	__u64 datap; /* 16-byte aligned pointer to extra space cast to __u64 */
+	__u32 size; /* size in bytes of the extra space */
+	__u32 __reserved[3];
+};
+
+#define SVE_MAGIC	0x53564501
+
+struct sve_context {
+	struct _aarch64_ctx head;
+	__u16 vl;
+	__u16 flags;
+	__u16 __reserved[2];
+};
+
+#define SVE_SIG_FLAG_SM	0x1	/* Context describes streaming mode */
+
+/* TPIDR2_EL0 context */
+#define TPIDR2_MAGIC	0x54504902
+
+struct tpidr2_context {
+	struct _aarch64_ctx head;
+	__u64 tpidr2;
+};
+
+#define ZA_MAGIC	0x54366345
+
+struct za_context {
+	struct _aarch64_ctx head;
+	__u16 vl;
+	__u16 __reserved[3];
+};
+
+#define ZT_MAGIC	0x5a544e01
+
+struct zt_context {
+	struct _aarch64_ctx head;
+	__u16 nregs;
+	__u16 __reserved[3];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/sve_context.h>
+
+/*
+ * The SVE architecture leaves space for future expansion of the
+ * vector length beyond its initial architectural limit of 2048 bits
+ * (16 quadwords).
+ *
+ * See linux/Documentation/arch/arm64/sve.rst for a description of the VL/VQ
+ * terminology.
+ */
+#define SVE_VQ_BYTES		__SVE_VQ_BYTES	/* bytes per quadword */
+
+#define SVE_VQ_MIN		__SVE_VQ_MIN
+#define SVE_VQ_MAX		__SVE_VQ_MAX
+
+#define SVE_VL_MIN		__SVE_VL_MIN
+#define SVE_VL_MAX		__SVE_VL_MAX
+
+#define SVE_NUM_ZREGS		__SVE_NUM_ZREGS
+#define SVE_NUM_PREGS		__SVE_NUM_PREGS
+
+#define sve_vl_valid(vl)	__sve_vl_valid(vl)
+#define sve_vq_from_vl(vl)	__sve_vq_from_vl(vl)
+#define sve_vl_from_vq(vq)	__sve_vl_from_vq(vq)
+
+/*
+ * If the SVE registers are currently live for the thread at signal delivery,
+ * sve_context.head.size >=
+ *	SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl))
+ * and the register data may be accessed using the SVE_SIG_*() macros.
+ *
+ * If sve_context.head.size <
+ *	SVE_SIG_CONTEXT_SIZE(sve_vq_from_vl(sve_context.vl)),
+ * the SVE registers were not live for the thread and no register data
+ * is included: in this case, the SVE_SIG_*() macros should not be
+ * used except for this check.
+ *
+ * The same convention applies when returning from a signal: a caller
+ * will need to remove or resize the sve_context block if it wants to
+ * make the SVE registers live when they were previously non-live or
+ * vice-versa.  This may require the caller to allocate fresh
+ * memory and/or move other context blocks in the signal frame.
+ *
+ * Changing the vector length during signal return is not permitted:
+ * sve_context.vl must equal the thread's current vector length when
+ * doing a sigreturn.
+ *
+ * On systems with support for SME the SVE register state may reflect either
+ * streaming or non-streaming mode.  In streaming mode the streaming mode
+ * vector length will be used and the flag SVE_SIG_FLAG_SM will be set in
+ * the flags field. It is permitted to enter or leave streaming mode in
+ * a signal return, applications should take care to ensure that any difference
+ * in vector length between the two modes is handled, including any resizing
+ * and movement of context blocks.
+ *
+ * Note: for all these macros, the "vq" argument denotes the vector length
+ * in quadwords (i.e., units of 128 bits).
+ *
+ * The correct way to obtain vq is to use sve_vq_from_vl(vl).  The
+ * result is valid if and only if sve_vl_valid(vl) is true.  This is
+ * guaranteed for a struct sve_context written by the kernel.
+ *
+ *
+ * Additional macros describe the contents and layout of the payload.
+ * For each, SVE_SIG_x_OFFSET(args) is the start offset relative to
+ * the start of struct sve_context, and SVE_SIG_x_SIZE(args) is the
+ * size in bytes:
+ *
+ *	x	type				description
+ *	-	----				-----------
+ *	REGS					the entire SVE context
+ *
+ *	ZREGS	__uint128_t[SVE_NUM_ZREGS][vq]	all Z-registers
+ *	ZREG	__uint128_t[vq]			individual Z-register Zn
+ *
+ *	PREGS	uint16_t[SVE_NUM_PREGS][vq]	all P-registers
+ *	PREG	uint16_t[vq]			individual P-register Pn
+ *
+ *	FFR	uint16_t[vq]			first-fault status register
+ *
+ * Additional data might be appended in the future.
+ *
+ * Unlike vregs[] in fpsimd_context, each SVE scalable register (Z-, P- or FFR)
+ * is encoded in memory in an endianness-invariant format, with the byte at
+ * offset i from the start of the in-memory representation containing bits
+ * [(7 + 8 * i) : (8 * i)] of the register value.
+ */
+
+#define SVE_SIG_ZREG_SIZE(vq)	__SVE_ZREG_SIZE(vq)
+#define SVE_SIG_PREG_SIZE(vq)	__SVE_PREG_SIZE(vq)
+#define SVE_SIG_FFR_SIZE(vq)	__SVE_FFR_SIZE(vq)
+
+#define SVE_SIG_REGS_OFFSET					\
+	((sizeof(struct sve_context) + (__SVE_VQ_BYTES - 1))	\
+		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+
+#define SVE_SIG_ZREGS_OFFSET \
+		(SVE_SIG_REGS_OFFSET + __SVE_ZREGS_OFFSET)
+#define SVE_SIG_ZREG_OFFSET(vq, n) \
+		(SVE_SIG_REGS_OFFSET + __SVE_ZREG_OFFSET(vq, n))
+#define SVE_SIG_ZREGS_SIZE(vq) __SVE_ZREGS_SIZE(vq)
+
+#define SVE_SIG_PREGS_OFFSET(vq) \
+		(SVE_SIG_REGS_OFFSET + __SVE_PREGS_OFFSET(vq))
+#define SVE_SIG_PREG_OFFSET(vq, n) \
+		(SVE_SIG_REGS_OFFSET + __SVE_PREG_OFFSET(vq, n))
+#define SVE_SIG_PREGS_SIZE(vq) __SVE_PREGS_SIZE(vq)
+
+#define SVE_SIG_FFR_OFFSET(vq) \
+		(SVE_SIG_REGS_OFFSET + __SVE_FFR_OFFSET(vq))
+
+#define SVE_SIG_REGS_SIZE(vq) \
+		(__SVE_FFR_OFFSET(vq) + __SVE_FFR_SIZE(vq))
+
+#define SVE_SIG_CONTEXT_SIZE(vq) \
+		(SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
+
+/*
+ * If the ZA register is enabled for the thread at signal delivery then,
+ * za_context.head.size >= ZA_SIG_CONTEXT_SIZE(sve_vq_from_vl(za_context.vl))
+ * and the register data may be accessed using the ZA_SIG_*() macros.
+ *
+ * If za_context.head.size < ZA_SIG_CONTEXT_SIZE(sve_vq_from_vl(za_context.vl))
+ * then ZA was not enabled and no register data was included in which case
+ * ZA register was not enabled for the thread and no register data
+ * the ZA_SIG_*() macros should not be used except for this check.
+ *
+ * The same convention applies when returning from a signal: a caller
+ * will need to remove or resize the za_context block if it wants to
+ * enable the ZA register when it was previously non-live or vice-versa.
+ * This may require the caller to allocate fresh memory and/or move other
+ * context blocks in the signal frame.
+ *
+ * Changing the vector length during signal return is not permitted:
+ * za_context.vl must equal the thread's current SME vector length when
+ * doing a sigreturn.
+ */
+
+#define ZA_SIG_REGS_OFFSET					\
+	((sizeof(struct za_context) + (__SVE_VQ_BYTES - 1))	\
+		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+
+#define ZA_SIG_REGS_SIZE(vq) ((vq * __SVE_VQ_BYTES) * (vq * __SVE_VQ_BYTES))
+
+#define ZA_SIG_ZAV_OFFSET(vq, n) (ZA_SIG_REGS_OFFSET + \
+				  (SVE_SIG_ZREG_SIZE(vq) * n))
+
+#define ZA_SIG_CONTEXT_SIZE(vq) \
+		(ZA_SIG_REGS_OFFSET + ZA_SIG_REGS_SIZE(vq))
+
+#define ZT_SIG_REG_SIZE 512
+
+#define ZT_SIG_REG_BYTES (ZT_SIG_REG_SIZE / 8)
+
+#define ZT_SIG_REGS_OFFSET sizeof(struct zt_context)
+
+#define ZT_SIG_REGS_SIZE(n) (ZT_SIG_REG_BYTES * n)
+
+#define ZT_SIG_CONTEXT_SIZE(n) \
+	(sizeof(struct zt_context) + ZT_SIG_REGS_SIZE(n))
+
+#endif /* _UAPI__ASM_SIGCONTEXT_H */
diff --git a/arch/arm64/include/uapi/asm/signal.h b/arch/arm64/include/uapi/asm/signal.h
new file mode 100644
index 000000000..bdf0cfb04
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/signal.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_SIGNAL_H
+#define __ASM_SIGNAL_H
+
+/* Required for AArch32 compatibility. */
+#define SA_RESTORER	0x04000000
+
+#define MINSIGSTKSZ 5120
+#define SIGSTKSZ    16384
+
+#include <asm-generic/signal.h>
+
+#endif
diff --git a/arch/arm64/include/uapi/asm/statfs.h b/arch/arm64/include/uapi/asm/statfs.h
new file mode 100644
index 000000000..615357b6b
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/statfs.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_STATFS_H
+#define __ASM_STATFS_H
+
+#define ARCH_PACK_COMPAT_STATFS64 __attribute__((packed,aligned(4)))
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/arm64/include/uapi/asm/sve_context.h b/arch/arm64/include/uapi/asm/sve_context.h
new file mode 100644
index 000000000..754ab751b
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/sve_context.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Copyright (C) 2017-2018 ARM Limited */
+
+/*
+ * For use by other UAPI headers only.
+ * Do not make direct use of header or its definitions.
+ */
+
+#ifndef _UAPI__ASM_SVE_CONTEXT_H
+#define _UAPI__ASM_SVE_CONTEXT_H
+
+#include <linux/types.h>
+
+#define __SVE_VQ_BYTES		16	/* number of bytes per quadword */
+
+#define __SVE_VQ_MIN		1
+#define __SVE_VQ_MAX		512
+
+#define __SVE_VL_MIN		(__SVE_VQ_MIN * __SVE_VQ_BYTES)
+#define __SVE_VL_MAX		(__SVE_VQ_MAX * __SVE_VQ_BYTES)
+
+#define __SVE_NUM_ZREGS		32
+#define __SVE_NUM_PREGS		16
+
+#define __sve_vl_valid(vl)			\
+	((vl) % __SVE_VQ_BYTES == 0 &&		\
+	 (vl) >= __SVE_VL_MIN &&		\
+	 (vl) <= __SVE_VL_MAX)
+
+#define __sve_vq_from_vl(vl)	((vl) / __SVE_VQ_BYTES)
+#define __sve_vl_from_vq(vq)	((vq) * __SVE_VQ_BYTES)
+
+#define __SVE_ZREG_SIZE(vq)	((__u32)(vq) * __SVE_VQ_BYTES)
+#define __SVE_PREG_SIZE(vq)	((__u32)(vq) * (__SVE_VQ_BYTES / 8))
+#define __SVE_FFR_SIZE(vq)	__SVE_PREG_SIZE(vq)
+
+#define __SVE_ZREGS_OFFSET	0
+#define __SVE_ZREG_OFFSET(vq, n) \
+	(__SVE_ZREGS_OFFSET + __SVE_ZREG_SIZE(vq) * (n))
+#define __SVE_ZREGS_SIZE(vq) \
+	(__SVE_ZREG_OFFSET(vq, __SVE_NUM_ZREGS) - __SVE_ZREGS_OFFSET)
+
+#define __SVE_PREGS_OFFSET(vq) \
+	(__SVE_ZREGS_OFFSET + __SVE_ZREGS_SIZE(vq))
+#define __SVE_PREG_OFFSET(vq, n) \
+	(__SVE_PREGS_OFFSET(vq) + __SVE_PREG_SIZE(vq) * (n))
+#define __SVE_PREGS_SIZE(vq) \
+	(__SVE_PREG_OFFSET(vq, __SVE_NUM_PREGS) - __SVE_PREGS_OFFSET(vq))
+
+#define __SVE_FFR_OFFSET(vq) \
+	(__SVE_PREGS_OFFSET(vq) + __SVE_PREGS_SIZE(vq))
+
+#endif /* ! _UAPI__ASM_SVE_CONTEXT_H */
diff --git a/arch/arm64/include/uapi/asm/ucontext.h b/arch/arm64/include/uapi/asm/ucontext.h
new file mode 100644
index 000000000..ee02721a7
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/ucontext.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _UAPI__ASM_UCONTEXT_H
+#define _UAPI__ASM_UCONTEXT_H
+
+#include <linux/types.h>
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext	 *uc_link;
+	stack_t		  uc_stack;
+	sigset_t	  uc_sigmask;
+	/* glibc uses a 1024-bit sigset_t */
+	__u8		  __unused[1024 / 8 - sizeof(sigset_t)];
+	/* last for future expansion */
+	struct sigcontext uc_mcontext;
+};
+
+#endif /* _UAPI__ASM_UCONTEXT_H */
diff --git a/arch/arm64/include/uapi/asm/unistd.h b/arch/arm64/include/uapi/asm/unistd.h
new file mode 100644
index 000000000..ce2ee8f1e
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/unistd.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define __ARCH_WANT_RENAMEAT
+#define __ARCH_WANT_NEW_STAT
+#define __ARCH_WANT_SET_GET_RLIMIT
+#define __ARCH_WANT_TIME32_SYSCALLS
+#define __ARCH_WANT_SYS_CLONE3
+#define __ARCH_WANT_MEMFD_SECRET
+
+#include <asm-generic/unistd.h>
diff --git a/arch/arm64/kernel/.gitignore b/arch/arm64/kernel/.gitignore
new file mode 100644
index 000000000..bbb90f92d
--- /dev/null
+++ b/arch/arm64/kernel/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
new file mode 100644
index 000000000..d95b3d6b4
--- /dev/null
+++ b/arch/arm64/kernel/Makefile
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+CFLAGS_armv8_deprecated.o := -I$(src)
+
+CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_insn.o = $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_return_address.o = $(CC_FLAGS_FTRACE)
+
+# Remove stack protector to avoid triggering unneeded stack canary
+# checks due to randomize_kstack_offset.
+CFLAGS_REMOVE_syscall.o	 = -fstack-protector -fstack-protector-strong
+CFLAGS_syscall.o	+= -fno-stack-protector
+
+# When KASAN is enabled, a stack trace is recorded for every alloc/free, which
+# can significantly impact performance. Avoid instrumenting the stack trace
+# collection code to minimize this impact.
+KASAN_SANITIZE_stacktrace.o := n
+
+# It's not safe to invoke KCOV when portions of the kernel environment aren't
+# available or are out-of-sync with HW state. Since `noinstr` doesn't always
+# inhibit KCOV instrumentation, disable it for the entire compilation unit.
+KCOV_INSTRUMENT_entry-common.o := n
+KCOV_INSTRUMENT_idle.o := n
+
+# Object file lists.
+obj-y			:= debug-monitors.o entry.o irq.o fpsimd.o		\
+			   entry-common.o entry-fpsimd.o process.o ptrace.o	\
+			   setup.o signal.o sys.o stacktrace.o time.o traps.o	\
+			   io.o vdso.o hyp-stub.o psci.o cpu_ops.o		\
+			   return_address.o cpuinfo.o cpu_errata.o		\
+			   cpufeature.o alternative.o cacheinfo.o		\
+			   smp.o smp_spin_table.o topology.o smccc-call.o	\
+			   syscall.o proton-pack.o idreg-override.o idle.o	\
+			   patching.o
+
+obj-$(CONFIG_COMPAT)			+= sys32.o signal32.o			\
+					   sys_compat.o
+obj-$(CONFIG_COMPAT)			+= sigreturn32.o
+obj-$(CONFIG_COMPAT_ALIGNMENT_FIXUPS)	+= compat_alignment.o
+obj-$(CONFIG_KUSER_HELPERS)		+= kuser32.o
+obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o entry-ftrace.o
+obj-$(CONFIG_MODULES)			+= module.o module-plts.o
+obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o perf_callchain.o
+obj-$(CONFIG_HARDLOCKUP_DETECTOR_PERF)	+= watchdog_hld.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
+obj-$(CONFIG_CPU_PM)			+= sleep.o suspend.o
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
+obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
+obj-$(CONFIG_KGDB)			+= kgdb.o
+obj-$(CONFIG_EFI)			+= efi.o efi-rt-wrapper.o
+obj-$(CONFIG_PCI)			+= pci.o
+obj-$(CONFIG_ARMV8_DEPRECATED)		+= armv8_deprecated.o
+obj-$(CONFIG_ACPI)			+= acpi.o
+obj-$(CONFIG_ACPI_NUMA)			+= acpi_numa.o
+obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL)	+= acpi_parking_protocol.o
+obj-$(CONFIG_PARAVIRT)			+= paravirt.o
+obj-$(CONFIG_RANDOMIZE_BASE)		+= kaslr.o pi/
+obj-$(CONFIG_HIBERNATION)		+= hibernate.o hibernate-asm.o
+obj-$(CONFIG_ELF_CORE)			+= elfcore.o
+obj-$(CONFIG_KEXEC_CORE)		+= machine_kexec.o relocate_kernel.o	\
+					   cpu-reset.o
+obj-$(CONFIG_KEXEC_FILE)		+= machine_kexec_file.o kexec_image.o
+obj-$(CONFIG_ARM64_RELOC_TEST)		+= arm64-reloc-test.o
+arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o
+obj-$(CONFIG_CRASH_DUMP)		+= crash_dump.o
+obj-$(CONFIG_CRASH_CORE)		+= crash_core.o
+obj-$(CONFIG_ARM_SDE_INTERFACE)		+= sdei.o
+obj-$(CONFIG_ARM64_PTR_AUTH)		+= pointer_auth.o
+obj-$(CONFIG_ARM64_MTE)			+= mte.o
+obj-y					+= vdso-wrap.o
+obj-$(CONFIG_COMPAT_VDSO)		+= vdso32-wrap.o
+obj-$(CONFIG_UNWIND_PATCH_PAC_INTO_SCS)	+= patch-scs.o
+CFLAGS_patch-scs.o			+= -mbranch-protection=none
+
+# Force dependency (vdso*-wrap.S includes vdso.so through incbin)
+$(obj)/vdso-wrap.o: $(obj)/vdso/vdso.so
+$(obj)/vdso32-wrap.o: $(obj)/vdso32/vdso.so
+
+obj-y					+= probes/
+obj-y					+= head.o
+extra-y					+= vmlinux.lds
+
+ifeq ($(CONFIG_DEBUG_EFI),y)
+AFLAGS_head.o += -DVMLINUX_PATH="\"$(realpath $(objtree)/vmlinux)\""
+endif
+
+# for cleaning
+subdir- += vdso vdso32
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
new file mode 100644
index 000000000..dba8fcec7
--- /dev/null
+++ b/arch/arm64/kernel/acpi.c
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ARM64 Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2013-2014, Linaro Ltd.
+ *	Author: Al Stone <al.stone@linaro.org>
+ *	Author: Graeme Gregory <graeme.gregory@linaro.org>
+ *	Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *	Author: Tomasz Nowicki <tomasz.nowicki@linaro.org>
+ *	Author: Naresh Bhat <naresh.bhat@linaro.org>
+ */
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/acpi.h>
+#include <linux/arm-smccc.h>
+#include <linux/cpumask.h>
+#include <linux/efi.h>
+#include <linux/efi-bgrt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/irq_work.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
+#include <linux/smp.h>
+#include <linux/serial_core.h>
+#include <linux/pgtable.h>
+
+#include <acpi/ghes.h>
+#include <asm/cputype.h>
+#include <asm/cpu_ops.h>
+#include <asm/daifflags.h>
+#include <asm/smp_plat.h>
+
+int acpi_noirq = 1;		/* skip ACPI IRQ initialization */
+int acpi_disabled = 1;
+EXPORT_SYMBOL(acpi_disabled);
+
+int acpi_pci_disabled = 1;	/* skip ACPI PCI scan and IRQ initialization */
+EXPORT_SYMBOL(acpi_pci_disabled);
+
+static bool param_acpi_off __initdata;
+static bool param_acpi_on __initdata;
+static bool param_acpi_force __initdata;
+
+static int __init parse_acpi(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	/* "acpi=off" disables both ACPI table parsing and interpreter */
+	if (strcmp(arg, "off") == 0)
+		param_acpi_off = true;
+	else if (strcmp(arg, "on") == 0) /* prefer ACPI over DT */
+		param_acpi_on = true;
+	else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */
+		param_acpi_force = true;
+	else
+		return -EINVAL;	/* Core will print when we return error */
+
+	return 0;
+}
+early_param("acpi", parse_acpi);
+
+static bool __init dt_is_stub(void)
+{
+	int node;
+
+	fdt_for_each_subnode(node, initial_boot_params, 0) {
+		const char *name = fdt_get_name(initial_boot_params, node, NULL);
+		if (strcmp(name, "chosen") == 0)
+			continue;
+		if (strcmp(name, "hypervisor") == 0 &&
+		    of_flat_dt_is_compatible(node, "xen,xen"))
+			continue;
+
+		return false;
+	}
+
+	return true;
+}
+
+/*
+ * __acpi_map_table() will be called before page_init(), so early_ioremap()
+ * or early_memremap() should be called here to for ACPI table mapping.
+ */
+void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+	if (!size)
+		return NULL;
+
+	return early_memremap(phys, size);
+}
+
+void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
+{
+	if (!map || !size)
+		return;
+
+	early_memunmap(map, size);
+}
+
+bool __init acpi_psci_present(void)
+{
+	return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT;
+}
+
+/* Whether HVC must be used instead of SMC as the PSCI conduit */
+bool acpi_psci_use_hvc(void)
+{
+	return acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC;
+}
+
+/*
+ * acpi_fadt_sanity_check() - Check FADT presence and carry out sanity
+ *			      checks on it
+ *
+ * Return 0 on success,  <0 on failure
+ */
+static int __init acpi_fadt_sanity_check(void)
+{
+	struct acpi_table_header *table;
+	struct acpi_table_fadt *fadt;
+	acpi_status status;
+	int ret = 0;
+
+	/*
+	 * FADT is required on arm64; retrieve it to check its presence
+	 * and carry out revision and ACPI HW reduced compliancy tests
+	 */
+	status = acpi_get_table(ACPI_SIG_FADT, 0, &table);
+	if (ACPI_FAILURE(status)) {
+		const char *msg = acpi_format_exception(status);
+
+		pr_err("Failed to get FADT table, %s\n", msg);
+		return -ENODEV;
+	}
+
+	fadt = (struct acpi_table_fadt *)table;
+
+	/*
+	 * Revision in table header is the FADT Major revision, and there
+	 * is a minor revision of FADT which was introduced by ACPI 5.1,
+	 * we only deal with ACPI 5.1 or newer revision to get GIC and SMP
+	 * boot protocol configuration data.
+	 */
+	if (table->revision < 5 ||
+	   (table->revision == 5 && fadt->minor_revision < 1)) {
+		pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
+		       table->revision, fadt->minor_revision);
+
+		if (!fadt->arm_boot_flags) {
+			ret = -EINVAL;
+			goto out;
+		}
+		pr_err("FADT has ARM boot flags set, assuming 5.1\n");
+	}
+
+	if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {
+		pr_err("FADT not ACPI hardware reduced compliant\n");
+		ret = -EINVAL;
+	}
+
+out:
+	/*
+	 * acpi_get_table() creates FADT table mapping that
+	 * should be released after parsing and before resuming boot
+	 */
+	acpi_put_table(table);
+	return ret;
+}
+
+/*
+ * acpi_boot_table_init() called from setup_arch(), always.
+ *	1. find RSDP and get its address, and then find XSDT
+ *	2. extract all tables and checksums them all
+ *	3. check ACPI FADT revision
+ *	4. check ACPI FADT HW reduced flag
+ *
+ * We can parse ACPI boot-time tables such as MADT after
+ * this function is called.
+ *
+ * On return ACPI is enabled if either:
+ *
+ * - ACPI tables are initialized and sanity checks passed
+ * - acpi=force was passed in the command line and ACPI was not disabled
+ *   explicitly through acpi=off command line parameter
+ *
+ * ACPI is disabled on function return otherwise
+ */
+void __init acpi_boot_table_init(void)
+{
+	/*
+	 * Enable ACPI instead of device tree unless
+	 * - ACPI has been disabled explicitly (acpi=off), or
+	 * - the device tree is not empty (it has more than just a /chosen node,
+	 *   and a /hypervisor node when running on Xen)
+	 *   and ACPI has not been [force] enabled (acpi=on|force)
+	 */
+	if (param_acpi_off ||
+	    (!param_acpi_on && !param_acpi_force && !dt_is_stub()))
+		goto done;
+
+	/*
+	 * ACPI is disabled at this point. Enable it in order to parse
+	 * the ACPI tables and carry out sanity checks
+	 */
+	enable_acpi();
+
+	/*
+	 * If ACPI tables are initialized and FADT sanity checks passed,
+	 * leave ACPI enabled and carry on booting; otherwise disable ACPI
+	 * on initialization error.
+	 * If acpi=force was passed on the command line it forces ACPI
+	 * to be enabled even if its initialization failed.
+	 */
+	if (acpi_table_init() || acpi_fadt_sanity_check()) {
+		pr_err("Failed to init ACPI tables\n");
+		if (!param_acpi_force)
+			disable_acpi();
+	}
+
+done:
+	if (acpi_disabled) {
+		if (earlycon_acpi_spcr_enable)
+			early_init_dt_scan_chosen_stdout();
+	} else {
+		acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
+		if (IS_ENABLED(CONFIG_ACPI_BGRT))
+			acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
+	}
+}
+
+static pgprot_t __acpi_get_writethrough_mem_attribute(void)
+{
+	/*
+	 * Although UEFI specifies the use of Normal Write-through for
+	 * EFI_MEMORY_WT, it is seldom used in practice and not implemented
+	 * by most (all?) CPUs. Rather than allocate a MAIR just for this
+	 * purpose, emit a warning and use Normal Non-cacheable instead.
+	 */
+	pr_warn_once("No MAIR allocation for EFI_MEMORY_WT; treating as Normal Non-cacheable\n");
+	return __pgprot(PROT_NORMAL_NC);
+}
+
+pgprot_t __acpi_get_mem_attribute(phys_addr_t addr)
+{
+	/*
+	 * According to "Table 8 Map: EFI memory types to AArch64 memory
+	 * types" of UEFI 2.5 section 2.3.6.1, each EFI memory type is
+	 * mapped to a corresponding MAIR attribute encoding.
+	 * The EFI memory attribute advises all possible capabilities
+	 * of a memory region.
+	 */
+
+	u64 attr;
+
+	attr = efi_mem_attributes(addr);
+	if (attr & EFI_MEMORY_WB)
+		return PAGE_KERNEL;
+	if (attr & EFI_MEMORY_WC)
+		return __pgprot(PROT_NORMAL_NC);
+	if (attr & EFI_MEMORY_WT)
+		return __acpi_get_writethrough_mem_attribute();
+	return __pgprot(PROT_DEVICE_nGnRnE);
+}
+
+void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
+{
+	efi_memory_desc_t *md, *region = NULL;
+	pgprot_t prot;
+
+	if (WARN_ON_ONCE(!efi_enabled(EFI_MEMMAP)))
+		return NULL;
+
+	for_each_efi_memory_desc(md) {
+		u64 end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
+
+		if (phys < md->phys_addr || phys >= end)
+			continue;
+
+		if (phys + size > end) {
+			pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n");
+			return NULL;
+		}
+		region = md;
+		break;
+	}
+
+	/*
+	 * It is fine for AML to remap regions that are not represented in the
+	 * EFI memory map at all, as it only describes normal memory, and MMIO
+	 * regions that require a virtual mapping to make them accessible to
+	 * the EFI runtime services.
+	 */
+	prot = __pgprot(PROT_DEVICE_nGnRnE);
+	if (region) {
+		switch (region->type) {
+		case EFI_LOADER_CODE:
+		case EFI_LOADER_DATA:
+		case EFI_BOOT_SERVICES_CODE:
+		case EFI_BOOT_SERVICES_DATA:
+		case EFI_CONVENTIONAL_MEMORY:
+		case EFI_PERSISTENT_MEMORY:
+			if (memblock_is_map_memory(phys) ||
+			    !memblock_is_region_memory(phys, size)) {
+				pr_warn(FW_BUG "requested region covers kernel memory @ %pa\n", &phys);
+				return NULL;
+			}
+			/*
+			 * Mapping kernel memory is permitted if the region in
+			 * question is covered by a single memblock with the
+			 * NOMAP attribute set: this enables the use of ACPI
+			 * table overrides passed via initramfs, which are
+			 * reserved in memory using arch_reserve_mem_area()
+			 * below. As this particular use case only requires
+			 * read access, fall through to the R/O mapping case.
+			 */
+			fallthrough;
+
+		case EFI_RUNTIME_SERVICES_CODE:
+			/*
+			 * This would be unusual, but not problematic per se,
+			 * as long as we take care not to create a writable
+			 * mapping for executable code.
+			 */
+			prot = PAGE_KERNEL_RO;
+			break;
+
+		case EFI_ACPI_RECLAIM_MEMORY:
+			/*
+			 * ACPI reclaim memory is used to pass firmware tables
+			 * and other data that is intended for consumption by
+			 * the OS only, which may decide it wants to reclaim
+			 * that memory and use it for something else. We never
+			 * do that, but we usually add it to the linear map
+			 * anyway, in which case we should use the existing
+			 * mapping.
+			 */
+			if (memblock_is_map_memory(phys))
+				return (void __iomem *)__phys_to_virt(phys);
+			fallthrough;
+
+		default:
+			if (region->attribute & EFI_MEMORY_WB)
+				prot = PAGE_KERNEL;
+			else if (region->attribute & EFI_MEMORY_WC)
+				prot = __pgprot(PROT_NORMAL_NC);
+			else if (region->attribute & EFI_MEMORY_WT)
+				prot = __acpi_get_writethrough_mem_attribute();
+		}
+	}
+	return ioremap_prot(phys, size, pgprot_val(prot));
+}
+
+/*
+ * Claim Synchronous External Aborts as a firmware first notification.
+ *
+ * Used by KVM and the arch do_sea handler.
+ * @regs may be NULL when called from process context.
+ */
+int apei_claim_sea(struct pt_regs *regs)
+{
+	int err = -ENOENT;
+	bool return_to_irqs_enabled;
+	unsigned long current_flags;
+
+	if (!IS_ENABLED(CONFIG_ACPI_APEI_GHES))
+		return err;
+
+	current_flags = local_daif_save_flags();
+
+	/* current_flags isn't useful here as daif doesn't tell us about pNMI */
+	return_to_irqs_enabled = !irqs_disabled_flags(arch_local_save_flags());
+
+	if (regs)
+		return_to_irqs_enabled = interrupts_enabled(regs);
+
+	/*
+	 * SEA can interrupt SError, mask it and describe this as an NMI so
+	 * that APEI defers the handling.
+	 */
+	local_daif_restore(DAIF_ERRCTX);
+	nmi_enter();
+	err = ghes_notify_sea();
+	nmi_exit();
+
+	/*
+	 * APEI NMI-like notifications are deferred to irq_work. Unless
+	 * we interrupted irqs-masked code, we can do that now.
+	 */
+	if (!err) {
+		if (return_to_irqs_enabled) {
+			local_daif_restore(DAIF_PROCCTX_NOIRQ);
+			__irq_enter();
+			irq_work_run();
+			__irq_exit();
+		} else {
+			pr_warn_ratelimited("APEI work queued but not completed");
+			err = -EINPROGRESS;
+		}
+	}
+
+	local_daif_restore(current_flags);
+
+	return err;
+}
+
+void arch_reserve_mem_area(acpi_physical_address addr, size_t size)
+{
+	memblock_mark_nomap(addr, size);
+}
+
+#ifdef CONFIG_ACPI_FFH
+/*
+ * Implements ARM64 specific callbacks to support ACPI FFH Operation Region as
+ * specified in https://developer.arm.com/docs/den0048/latest
+ */
+struct acpi_ffh_data {
+	struct acpi_ffh_info info;
+	void (*invoke_ffh_fn)(unsigned long a0, unsigned long a1,
+			      unsigned long a2, unsigned long a3,
+			      unsigned long a4, unsigned long a5,
+			      unsigned long a6, unsigned long a7,
+			      struct arm_smccc_res *args,
+			      struct arm_smccc_quirk *res);
+	void (*invoke_ffh64_fn)(const struct arm_smccc_1_2_regs *args,
+				struct arm_smccc_1_2_regs *res);
+};
+
+int acpi_ffh_address_space_arch_setup(void *handler_ctxt, void **region_ctxt)
+{
+	enum arm_smccc_conduit conduit;
+	struct acpi_ffh_data *ffh_ctxt;
+
+	if (arm_smccc_get_version() < ARM_SMCCC_VERSION_1_2)
+		return -EOPNOTSUPP;
+
+	conduit = arm_smccc_1_1_get_conduit();
+	if (conduit == SMCCC_CONDUIT_NONE) {
+		pr_err("%s: invalid SMCCC conduit\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	ffh_ctxt = kzalloc(sizeof(*ffh_ctxt), GFP_KERNEL);
+	if (!ffh_ctxt)
+		return -ENOMEM;
+
+	if (conduit == SMCCC_CONDUIT_SMC) {
+		ffh_ctxt->invoke_ffh_fn = __arm_smccc_smc;
+		ffh_ctxt->invoke_ffh64_fn = arm_smccc_1_2_smc;
+	} else {
+		ffh_ctxt->invoke_ffh_fn = __arm_smccc_hvc;
+		ffh_ctxt->invoke_ffh64_fn = arm_smccc_1_2_hvc;
+	}
+
+	memcpy(ffh_ctxt, handler_ctxt, sizeof(ffh_ctxt->info));
+
+	*region_ctxt = ffh_ctxt;
+	return AE_OK;
+}
+
+static bool acpi_ffh_smccc_owner_allowed(u32 fid)
+{
+	int owner = ARM_SMCCC_OWNER_NUM(fid);
+
+	if (owner == ARM_SMCCC_OWNER_STANDARD ||
+	    owner == ARM_SMCCC_OWNER_SIP || owner == ARM_SMCCC_OWNER_OEM)
+		return true;
+
+	return false;
+}
+
+int acpi_ffh_address_space_arch_handler(acpi_integer *value, void *region_context)
+{
+	int ret = 0;
+	struct acpi_ffh_data *ffh_ctxt = region_context;
+
+	if (ffh_ctxt->info.offset == 0) {
+		/* SMC/HVC 32bit call */
+		struct arm_smccc_res res;
+		u32 a[8] = { 0 }, *ptr = (u32 *)value;
+
+		if (!ARM_SMCCC_IS_FAST_CALL(*ptr) || ARM_SMCCC_IS_64(*ptr) ||
+		    !acpi_ffh_smccc_owner_allowed(*ptr) ||
+		    ffh_ctxt->info.length > 32) {
+			ret = AE_ERROR;
+		} else {
+			int idx, len = ffh_ctxt->info.length >> 2;
+
+			for (idx = 0; idx < len; idx++)
+				a[idx] = *(ptr + idx);
+
+			ffh_ctxt->invoke_ffh_fn(a[0], a[1], a[2], a[3], a[4],
+						a[5], a[6], a[7], &res, NULL);
+			memcpy(value, &res, sizeof(res));
+		}
+
+	} else if (ffh_ctxt->info.offset == 1) {
+		/* SMC/HVC 64bit call */
+		struct arm_smccc_1_2_regs *r = (struct arm_smccc_1_2_regs *)value;
+
+		if (!ARM_SMCCC_IS_FAST_CALL(r->a0) || !ARM_SMCCC_IS_64(r->a0) ||
+		    !acpi_ffh_smccc_owner_allowed(r->a0) ||
+		    ffh_ctxt->info.length > sizeof(*r)) {
+			ret = AE_ERROR;
+		} else {
+			ffh_ctxt->invoke_ffh64_fn(r, r);
+			memcpy(value, r, ffh_ctxt->info.length);
+		}
+	} else {
+		ret = AE_ERROR;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_ACPI_FFH */
diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c
new file mode 100644
index 000000000..e51535a5f
--- /dev/null
+++ b/arch/arm64/kernel/acpi_numa.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI 5.1 based NUMA setup for ARM64
+ * Lots of code was borrowed from arch/x86/mm/srat.c
+ *
+ * Copyright 2004 Andi Kleen, SuSE Labs.
+ * Copyright (C) 2013-2016, Linaro Ltd.
+ *		Author: Hanjun Guo <hanjun.guo@linaro.org>
+ *
+ * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
+ *
+ * Called from acpi_numa_init while reading the SRAT and SLIT tables.
+ * Assumes all memory regions belonging to a single proximity domain
+ * are in one chunk. Holes between them will be included in the node.
+ */
+
+#define pr_fmt(fmt) "ACPI: NUMA: " fmt
+
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+#include <linux/mmzone.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+
+#include <asm/numa.h>
+
+static int acpi_early_node_map[NR_CPUS] __initdata = { NUMA_NO_NODE };
+
+int __init acpi_numa_get_nid(unsigned int cpu)
+{
+	return acpi_early_node_map[cpu];
+}
+
+static inline int get_cpu_for_acpi_id(u32 uid)
+{
+	int cpu;
+
+	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
+		if (uid == get_acpi_id_for_cpu(cpu))
+			return cpu;
+
+	return -EINVAL;
+}
+
+static int __init acpi_parse_gicc_pxm(union acpi_subtable_headers *header,
+				      const unsigned long end)
+{
+	struct acpi_srat_gicc_affinity *pa;
+	int cpu, pxm, node;
+
+	if (srat_disabled())
+		return -EINVAL;
+
+	pa = (struct acpi_srat_gicc_affinity *)header;
+	if (!pa)
+		return -EINVAL;
+
+	if (!(pa->flags & ACPI_SRAT_GICC_ENABLED))
+		return 0;
+
+	pxm = pa->proximity_domain;
+	node = pxm_to_node(pxm);
+
+	/*
+	 * If we can't map the UID to a logical cpu this
+	 * means that the UID is not part of possible cpus
+	 * so we do not need a NUMA mapping for it, skip
+	 * the SRAT entry and keep parsing.
+	 */
+	cpu = get_cpu_for_acpi_id(pa->acpi_processor_uid);
+	if (cpu < 0)
+		return 0;
+
+	acpi_early_node_map[cpu] = node;
+	pr_info("SRAT: PXM %d -> MPIDR 0x%llx -> Node %d\n", pxm,
+		cpu_logical_map(cpu), node);
+
+	return 0;
+}
+
+void __init acpi_map_cpus_to_nodes(void)
+{
+	acpi_table_parse_entries(ACPI_SIG_SRAT, sizeof(struct acpi_table_srat),
+					    ACPI_SRAT_TYPE_GICC_AFFINITY,
+					    acpi_parse_gicc_pxm, 0);
+}
+
+/* Callback for Proximity Domain -> ACPI processor UID mapping */
+void __init acpi_numa_gicc_affinity_init(struct acpi_srat_gicc_affinity *pa)
+{
+	int pxm, node;
+
+	if (srat_disabled())
+		return;
+
+	if (pa->header.length < sizeof(struct acpi_srat_gicc_affinity)) {
+		pr_err("SRAT: Invalid SRAT header length: %d\n",
+			pa->header.length);
+		bad_srat();
+		return;
+	}
+
+	if (!(pa->flags & ACPI_SRAT_GICC_ENABLED))
+		return;
+
+	pxm = pa->proximity_domain;
+	node = acpi_map_pxm_to_node(pxm);
+
+	if (node == NUMA_NO_NODE) {
+		pr_err("SRAT: Too many proximity domains %d\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	node_set(node, numa_nodes_parsed);
+}
+
diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c
new file mode 100644
index 000000000..b1990e38a
--- /dev/null
+++ b/arch/arm64/kernel/acpi_parking_protocol.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARM64 ACPI Parking Protocol implementation
+ *
+ * Authors: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *	    Mark Salter <msalter@redhat.com>
+ */
+#include <linux/acpi.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+
+#include <asm/cpu_ops.h>
+
+struct parking_protocol_mailbox {
+	__le32 cpu_id;
+	__le32 reserved;
+	__le64 entry_point;
+};
+
+struct cpu_mailbox_entry {
+	struct parking_protocol_mailbox __iomem *mailbox;
+	phys_addr_t mailbox_addr;
+	u8 version;
+	u8 gic_cpu_id;
+};
+
+static struct cpu_mailbox_entry cpu_mailbox_entries[NR_CPUS];
+
+void __init acpi_set_mailbox_entry(int cpu,
+				   struct acpi_madt_generic_interrupt *p)
+{
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+
+	cpu_entry->mailbox_addr = p->parked_address;
+	cpu_entry->version = p->parking_version;
+	cpu_entry->gic_cpu_id = p->cpu_interface_number;
+}
+
+bool acpi_parking_protocol_valid(int cpu)
+{
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+
+	return cpu_entry->mailbox_addr && cpu_entry->version;
+}
+
+static int acpi_parking_protocol_cpu_init(unsigned int cpu)
+{
+	pr_debug("%s: ACPI parked addr=%llx\n", __func__,
+		  cpu_mailbox_entries[cpu].mailbox_addr);
+
+	return 0;
+}
+
+static int acpi_parking_protocol_cpu_prepare(unsigned int cpu)
+{
+	return 0;
+}
+
+static int acpi_parking_protocol_cpu_boot(unsigned int cpu)
+{
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+	struct parking_protocol_mailbox __iomem *mailbox;
+	u32 cpu_id;
+
+	/*
+	 * Map mailbox memory with attribute device nGnRE (ie ioremap -
+	 * this deviates from the parking protocol specifications since
+	 * the mailboxes are required to be mapped nGnRnE; the attribute
+	 * discrepancy is harmless insofar as the protocol specification
+	 * is concerned).
+	 * If the mailbox is mistakenly allocated in the linear mapping
+	 * by FW ioremap will fail since the mapping will be prevented
+	 * by the kernel (it clashes with the linear mapping attributes
+	 * specifications).
+	 */
+	mailbox = ioremap(cpu_entry->mailbox_addr, sizeof(*mailbox));
+	if (!mailbox)
+		return -EIO;
+
+	cpu_id = readl_relaxed(&mailbox->cpu_id);
+	/*
+	 * Check if firmware has set-up the mailbox entry properly
+	 * before kickstarting the respective cpu.
+	 */
+	if (cpu_id != ~0U) {
+		iounmap(mailbox);
+		return -ENXIO;
+	}
+
+	/*
+	 * stash the mailbox address mapping to use it for further FW
+	 * checks in the postboot method
+	 */
+	cpu_entry->mailbox = mailbox;
+
+	/*
+	 * We write the entry point and cpu id as LE regardless of the
+	 * native endianness of the kernel. Therefore, any boot-loaders
+	 * that read this address need to convert this address to the
+	 * Boot-Loader's endianness before jumping.
+	 */
+	writeq_relaxed(__pa_symbol(secondary_entry),
+		       &mailbox->entry_point);
+	writel_relaxed(cpu_entry->gic_cpu_id, &mailbox->cpu_id);
+
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static void acpi_parking_protocol_cpu_postboot(void)
+{
+	int cpu = smp_processor_id();
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+	struct parking_protocol_mailbox __iomem *mailbox = cpu_entry->mailbox;
+	u64 entry_point;
+
+	entry_point = readq_relaxed(&mailbox->entry_point);
+	/*
+	 * Check if firmware has cleared the entry_point as expected
+	 * by the protocol specification.
+	 */
+	WARN_ON(entry_point);
+}
+
+const struct cpu_operations acpi_parking_protocol_ops = {
+	.name		= "parking-protocol",
+	.cpu_init	= acpi_parking_protocol_cpu_init,
+	.cpu_prepare	= acpi_parking_protocol_cpu_prepare,
+	.cpu_boot	= acpi_parking_protocol_cpu_boot,
+	.cpu_postboot	= acpi_parking_protocol_cpu_postboot
+};
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
new file mode 100644
index 000000000..8ff6610af
--- /dev/null
+++ b/arch/arm64/kernel/alternative.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * alternative runtime patching
+ * inspired by the x86 version
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ */
+
+#define pr_fmt(fmt) "alternatives: " fmt
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/elf.h>
+#include <asm/cacheflush.h>
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
+#include <asm/insn.h>
+#include <asm/module.h>
+#include <asm/sections.h>
+#include <asm/vdso.h>
+#include <linux/stop_machine.h>
+
+#define __ALT_PTR(a, f)		((void *)&(a)->f + (a)->f)
+#define ALT_ORIG_PTR(a)		__ALT_PTR(a, orig_offset)
+#define ALT_REPL_PTR(a)		__ALT_PTR(a, alt_offset)
+
+#define ALT_CAP(a)		((a)->cpucap & ~ARM64_CB_BIT)
+#define ALT_HAS_CB(a)		((a)->cpucap & ARM64_CB_BIT)
+
+/* Volatile, as we may be patching the guts of READ_ONCE() */
+static volatile int all_alternatives_applied;
+
+static DECLARE_BITMAP(applied_alternatives, ARM64_NCAPS);
+
+struct alt_region {
+	struct alt_instr *begin;
+	struct alt_instr *end;
+};
+
+bool alternative_is_applied(u16 cpucap)
+{
+	if (WARN_ON(cpucap >= ARM64_NCAPS))
+		return false;
+
+	return test_bit(cpucap, applied_alternatives);
+}
+
+/*
+ * Check if the target PC is within an alternative block.
+ */
+static __always_inline bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
+{
+	unsigned long replptr = (unsigned long)ALT_REPL_PTR(alt);
+	return !(pc >= replptr && pc <= (replptr + alt->alt_len));
+}
+
+#define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))
+
+static __always_inline u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
+{
+	u32 insn;
+
+	insn = le32_to_cpu(*altinsnptr);
+
+	if (aarch64_insn_is_branch_imm(insn)) {
+		s32 offset = aarch64_get_branch_offset(insn);
+		unsigned long target;
+
+		target = (unsigned long)altinsnptr + offset;
+
+		/*
+		 * If we're branching inside the alternate sequence,
+		 * do not rewrite the instruction, as it is already
+		 * correct. Otherwise, generate the new instruction.
+		 */
+		if (branch_insn_requires_update(alt, target)) {
+			offset = target - (unsigned long)insnptr;
+			insn = aarch64_set_branch_offset(insn, offset);
+		}
+	} else if (aarch64_insn_is_adrp(insn)) {
+		s32 orig_offset, new_offset;
+		unsigned long target;
+
+		/*
+		 * If we're replacing an adrp instruction, which uses PC-relative
+		 * immediate addressing, adjust the offset to reflect the new
+		 * PC. adrp operates on 4K aligned addresses.
+		 */
+		orig_offset  = aarch64_insn_adrp_get_offset(insn);
+		target = align_down(altinsnptr, SZ_4K) + orig_offset;
+		new_offset = target - align_down(insnptr, SZ_4K);
+		insn = aarch64_insn_adrp_set_offset(insn, new_offset);
+	} else if (aarch64_insn_uses_literal(insn)) {
+		/*
+		 * Disallow patching unhandled instructions using PC relative
+		 * literal addresses
+		 */
+		BUG();
+	}
+
+	return insn;
+}
+
+static noinstr void patch_alternative(struct alt_instr *alt,
+			      __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	__le32 *replptr;
+	int i;
+
+	replptr = ALT_REPL_PTR(alt);
+	for (i = 0; i < nr_inst; i++) {
+		u32 insn;
+
+		insn = get_alt_insn(alt, origptr + i, replptr + i);
+		updptr[i] = cpu_to_le32(insn);
+	}
+}
+
+/*
+ * We provide our own, private D-cache cleaning function so that we don't
+ * accidentally call into the cache.S code, which is patched by us at
+ * runtime.
+ */
+static noinstr void clean_dcache_range_nopatch(u64 start, u64 end)
+{
+	u64 cur, d_size, ctr_el0;
+
+	ctr_el0 = arm64_ftr_reg_ctrel0.sys_val;
+	d_size = 4 << cpuid_feature_extract_unsigned_field(ctr_el0,
+							   CTR_EL0_DminLine_SHIFT);
+	cur = start & ~(d_size - 1);
+	do {
+		/*
+		 * We must clean+invalidate to the PoC in order to avoid
+		 * Cortex-A53 errata 826319, 827319, 824069 and 819472
+		 * (this corresponds to ARM64_WORKAROUND_CLEAN_CACHE)
+		 */
+		asm volatile("dc civac, %0" : : "r" (cur) : "memory");
+	} while (cur += d_size, cur < end);
+}
+
+static void __apply_alternatives(const struct alt_region *region,
+				 bool is_module,
+				 unsigned long *cpucap_mask)
+{
+	struct alt_instr *alt;
+	__le32 *origptr, *updptr;
+	alternative_cb_t alt_cb;
+
+	for (alt = region->begin; alt < region->end; alt++) {
+		int nr_inst;
+		int cap = ALT_CAP(alt);
+
+		if (!test_bit(cap, cpucap_mask))
+			continue;
+
+		if (!cpus_have_cap(cap))
+			continue;
+
+		if (ALT_HAS_CB(alt))
+			BUG_ON(alt->alt_len != 0);
+		else
+			BUG_ON(alt->alt_len != alt->orig_len);
+
+		origptr = ALT_ORIG_PTR(alt);
+		updptr = is_module ? origptr : lm_alias(origptr);
+		nr_inst = alt->orig_len / AARCH64_INSN_SIZE;
+
+		if (ALT_HAS_CB(alt))
+			alt_cb  = ALT_REPL_PTR(alt);
+		else
+			alt_cb = patch_alternative;
+
+		alt_cb(alt, origptr, updptr, nr_inst);
+
+		if (!is_module) {
+			clean_dcache_range_nopatch((u64)origptr,
+						   (u64)(origptr + nr_inst));
+		}
+	}
+
+	/*
+	 * The core module code takes care of cache maintenance in
+	 * flush_module_icache().
+	 */
+	if (!is_module) {
+		dsb(ish);
+		icache_inval_all_pou();
+		isb();
+
+		bitmap_or(applied_alternatives, applied_alternatives,
+			  cpucap_mask, ARM64_NCAPS);
+		bitmap_and(applied_alternatives, applied_alternatives,
+			   system_cpucaps, ARM64_NCAPS);
+	}
+}
+
+static void __init apply_alternatives_vdso(void)
+{
+	struct alt_region region;
+	const struct elf64_hdr *hdr;
+	const struct elf64_shdr *shdr;
+	const struct elf64_shdr *alt;
+	DECLARE_BITMAP(all_capabilities, ARM64_NCAPS);
+
+	bitmap_fill(all_capabilities, ARM64_NCAPS);
+
+	hdr = (struct elf64_hdr *)vdso_start;
+	shdr = (void *)hdr + hdr->e_shoff;
+	alt = find_section(hdr, shdr, ".altinstructions");
+	if (!alt)
+		return;
+
+	region = (struct alt_region){
+		.begin	= (void *)hdr + alt->sh_offset,
+		.end	= (void *)hdr + alt->sh_offset + alt->sh_size,
+	};
+
+	__apply_alternatives(&region, false, &all_capabilities[0]);
+}
+
+static const struct alt_region kernel_alternatives __initconst = {
+	.begin	= (struct alt_instr *)__alt_instructions,
+	.end	= (struct alt_instr *)__alt_instructions_end,
+};
+
+/*
+ * We might be patching the stop_machine state machine, so implement a
+ * really simple polling protocol here.
+ */
+static int __init __apply_alternatives_multi_stop(void *unused)
+{
+	/* We always have a CPU 0 at this point (__init) */
+	if (smp_processor_id()) {
+		while (!all_alternatives_applied)
+			cpu_relax();
+		isb();
+	} else {
+		DECLARE_BITMAP(remaining_capabilities, ARM64_NCAPS);
+
+		bitmap_complement(remaining_capabilities, boot_cpucaps,
+				  ARM64_NCAPS);
+
+		BUG_ON(all_alternatives_applied);
+		__apply_alternatives(&kernel_alternatives, false,
+				     remaining_capabilities);
+		/* Barriers provided by the cache flushing */
+		all_alternatives_applied = 1;
+	}
+
+	return 0;
+}
+
+void __init apply_alternatives_all(void)
+{
+	pr_info("applying system-wide alternatives\n");
+
+	apply_alternatives_vdso();
+	/* better not try code patching on a live SMP system */
+	stop_machine(__apply_alternatives_multi_stop, NULL, cpu_online_mask);
+}
+
+/*
+ * This is called very early in the boot process (directly after we run
+ * a feature detect on the boot CPU). No need to worry about other CPUs
+ * here.
+ */
+void __init apply_boot_alternatives(void)
+{
+	/* If called on non-boot cpu things could go wrong */
+	WARN_ON(smp_processor_id() != 0);
+
+	pr_info("applying boot alternatives\n");
+
+	__apply_alternatives(&kernel_alternatives, false,
+			     &boot_cpucaps[0]);
+}
+
+#ifdef CONFIG_MODULES
+void apply_alternatives_module(void *start, size_t length)
+{
+	struct alt_region region = {
+		.begin	= start,
+		.end	= start + length,
+	};
+	DECLARE_BITMAP(all_capabilities, ARM64_NCAPS);
+
+	bitmap_fill(all_capabilities, ARM64_NCAPS);
+
+	__apply_alternatives(&region, true, &all_capabilities[0]);
+}
+#endif
+
+noinstr void alt_cb_patch_nops(struct alt_instr *alt, __le32 *origptr,
+			       __le32 *updptr, int nr_inst)
+{
+	for (int i = 0; i < nr_inst; i++)
+		updptr[i] = cpu_to_le32(aarch64_insn_gen_nop());
+}
+EXPORT_SYMBOL(alt_cb_patch_nops);
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
new file mode 100644
index 000000000..e459cfd33
--- /dev/null
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+#include <linux/uaccess.h>
+
+#include <asm/cpufeature.h>
+#include <asm/insn.h>
+#include <asm/sysreg.h>
+#include <asm/system_misc.h>
+#include <asm/traps.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace-events-emulation.h"
+
+/*
+ * The runtime support for deprecated instruction support can be in one of
+ * following three states -
+ *
+ * 0 = undef
+ * 1 = emulate (software emulation)
+ * 2 = hw (supported in hardware)
+ */
+enum insn_emulation_mode {
+	INSN_UNDEF,
+	INSN_EMULATE,
+	INSN_HW,
+};
+
+enum legacy_insn_status {
+	INSN_DEPRECATED,
+	INSN_OBSOLETE,
+	INSN_UNAVAILABLE,
+};
+
+struct insn_emulation {
+	const char			*name;
+	enum legacy_insn_status		status;
+	bool				(*try_emulate)(struct pt_regs *regs,
+						       u32 insn);
+	int				(*set_hw_mode)(bool enable);
+
+	int current_mode;
+	int min;
+	int max;
+
+	/*
+	 * sysctl for this emulation + a sentinal entry.
+	 */
+	struct ctl_table sysctl[2];
+};
+
+#define ARM_OPCODE_CONDTEST_FAIL   0
+#define ARM_OPCODE_CONDTEST_PASS   1
+#define ARM_OPCODE_CONDTEST_UNCOND 2
+
+#define	ARM_OPCODE_CONDITION_UNCOND	0xf
+
+static unsigned int __maybe_unused aarch32_check_condition(u32 opcode, u32 psr)
+{
+	u32 cc_bits  = opcode >> 28;
+
+	if (cc_bits != ARM_OPCODE_CONDITION_UNCOND) {
+		if ((*aarch32_opcode_cond_checks[cc_bits])(psr))
+			return ARM_OPCODE_CONDTEST_PASS;
+		else
+			return ARM_OPCODE_CONDTEST_FAIL;
+	}
+	return ARM_OPCODE_CONDTEST_UNCOND;
+}
+
+#ifdef CONFIG_SWP_EMULATION
+/*
+ *  Implement emulation of the SWP/SWPB instructions using load-exclusive and
+ *  store-exclusive.
+ *
+ *  Syntax of SWP{B} instruction: SWP{B}<c> <Rt>, <Rt2>, [<Rn>]
+ *  Where: Rt  = destination
+ *	   Rt2 = source
+ *	   Rn  = address
+ */
+
+/*
+ * Error-checking SWP macros implemented using ldxr{b}/stxr{b}
+ */
+
+/* Arbitrary constant to ensure forward-progress of the LL/SC loop */
+#define __SWP_LL_SC_LOOPS	4
+
+#define __user_swpX_asm(data, addr, res, temp, temp2, B)	\
+do {								\
+	uaccess_enable_privileged();				\
+	__asm__ __volatile__(					\
+	"	mov		%w3, %w6\n"			\
+	"0:	ldxr"B"		%w2, [%4]\n"			\
+	"1:	stxr"B"		%w0, %w1, [%4]\n"		\
+	"	cbz		%w0, 2f\n"			\
+	"	sub		%w3, %w3, #1\n"			\
+	"	cbnz		%w3, 0b\n"			\
+	"	mov		%w0, %w5\n"			\
+	"	b		3f\n"				\
+	"2:\n"							\
+	"	mov		%w1, %w2\n"			\
+	"3:\n"							\
+	_ASM_EXTABLE_UACCESS_ERR(0b, 3b, %w0)			\
+	_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %w0)			\
+	: "=&r" (res), "+r" (data), "=&r" (temp), "=&r" (temp2)	\
+	: "r" ((unsigned long)addr), "i" (-EAGAIN),		\
+	  "i" (__SWP_LL_SC_LOOPS)				\
+	: "memory");						\
+	uaccess_disable_privileged();				\
+} while (0)
+
+#define __user_swp_asm(data, addr, res, temp, temp2) \
+	__user_swpX_asm(data, addr, res, temp, temp2, "")
+#define __user_swpb_asm(data, addr, res, temp, temp2) \
+	__user_swpX_asm(data, addr, res, temp, temp2, "b")
+
+/*
+ * Bit 22 of the instruction encoding distinguishes between
+ * the SWP and SWPB variants (bit set means SWPB).
+ */
+#define TYPE_SWPB (1 << 22)
+
+static int emulate_swpX(unsigned int address, unsigned int *data,
+			unsigned int type)
+{
+	unsigned int res = 0;
+
+	if ((type != TYPE_SWPB) && (address & 0x3)) {
+		/* SWP to unaligned address not permitted */
+		pr_debug("SWP instruction on unaligned pointer!\n");
+		return -EFAULT;
+	}
+
+	while (1) {
+		unsigned long temp, temp2;
+
+		if (type == TYPE_SWPB)
+			__user_swpb_asm(*data, address, res, temp, temp2);
+		else
+			__user_swp_asm(*data, address, res, temp, temp2);
+
+		if (likely(res != -EAGAIN) || signal_pending(current))
+			break;
+
+		cond_resched();
+	}
+
+	return res;
+}
+
+/*
+ * swp_handler logs the id of calling process, dissects the instruction, sanity
+ * checks the memory location, calls emulate_swpX for the actual operation and
+ * deals with fixup/error handling before returning
+ */
+static int swp_handler(struct pt_regs *regs, u32 instr)
+{
+	u32 destreg, data, type, address = 0;
+	const void __user *user_ptr;
+	int rn, rt2, res = 0;
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
+
+	type = instr & TYPE_SWPB;
+
+	switch (aarch32_check_condition(instr, regs->pstate)) {
+	case ARM_OPCODE_CONDTEST_PASS:
+		break;
+	case ARM_OPCODE_CONDTEST_FAIL:
+		/* Condition failed - return to next instruction */
+		goto ret;
+	case ARM_OPCODE_CONDTEST_UNCOND:
+		/* If unconditional encoding - not a SWP, undef */
+		return -EFAULT;
+	default:
+		return -EINVAL;
+	}
+
+	rn = aarch32_insn_extract_reg_num(instr, A32_RN_OFFSET);
+	rt2 = aarch32_insn_extract_reg_num(instr, A32_RT2_OFFSET);
+
+	address = (u32)regs->user_regs.regs[rn];
+	data	= (u32)regs->user_regs.regs[rt2];
+	destreg = aarch32_insn_extract_reg_num(instr, A32_RT_OFFSET);
+
+	pr_debug("addr in r%d->0x%08x, dest is r%d, source in r%d->0x%08x)\n",
+		rn, address, destreg,
+		aarch32_insn_extract_reg_num(instr, A32_RT2_OFFSET), data);
+
+	/* Check access in reasonable access range for both SWP and SWPB */
+	user_ptr = (const void __user *)(unsigned long)(address & ~3);
+	if (!access_ok(user_ptr, 4)) {
+		pr_debug("SWP{B} emulation: access to 0x%08x not allowed!\n",
+			address);
+		goto fault;
+	}
+
+	res = emulate_swpX(address, &data, type);
+	if (res == -EFAULT)
+		goto fault;
+	else if (res == 0)
+		regs->user_regs.regs[destreg] = data;
+
+ret:
+	if (type == TYPE_SWPB)
+		trace_instruction_emulation("swpb", regs->pc);
+	else
+		trace_instruction_emulation("swp", regs->pc);
+
+	pr_warn_ratelimited("\"%s\" (%ld) uses obsolete SWP{B} instruction at 0x%llx\n",
+			current->comm, (unsigned long)current->pid, regs->pc);
+
+	arm64_skip_faulting_instruction(regs, 4);
+	return 0;
+
+fault:
+	pr_debug("SWP{B} emulation: access caused memory abort!\n");
+	arm64_notify_segfault(address);
+
+	return 0;
+}
+
+static bool try_emulate_swp(struct pt_regs *regs, u32 insn)
+{
+	/* SWP{B} only exists in ARM state and does not exist in Thumb */
+	if (!compat_user_mode(regs) || compat_thumb_mode(regs))
+		return false;
+
+	if ((insn & 0x0fb00ff0) != 0x01000090)
+		return false;
+
+	return swp_handler(regs, insn) == 0;
+}
+
+static struct insn_emulation insn_swp = {
+	.name = "swp",
+	.status = INSN_OBSOLETE,
+	.try_emulate = try_emulate_swp,
+	.set_hw_mode = NULL,
+};
+#endif /* CONFIG_SWP_EMULATION */
+
+#ifdef CONFIG_CP15_BARRIER_EMULATION
+static int cp15barrier_handler(struct pt_regs *regs, u32 instr)
+{
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
+
+	switch (aarch32_check_condition(instr, regs->pstate)) {
+	case ARM_OPCODE_CONDTEST_PASS:
+		break;
+	case ARM_OPCODE_CONDTEST_FAIL:
+		/* Condition failed - return to next instruction */
+		goto ret;
+	case ARM_OPCODE_CONDTEST_UNCOND:
+		/* If unconditional encoding - not a barrier instruction */
+		return -EFAULT;
+	default:
+		return -EINVAL;
+	}
+
+	switch (aarch32_insn_mcr_extract_crm(instr)) {
+	case 10:
+		/*
+		 * dmb - mcr p15, 0, Rt, c7, c10, 5
+		 * dsb - mcr p15, 0, Rt, c7, c10, 4
+		 */
+		if (aarch32_insn_mcr_extract_opc2(instr) == 5) {
+			dmb(sy);
+			trace_instruction_emulation(
+				"mcr p15, 0, Rt, c7, c10, 5 ; dmb", regs->pc);
+		} else {
+			dsb(sy);
+			trace_instruction_emulation(
+				"mcr p15, 0, Rt, c7, c10, 4 ; dsb", regs->pc);
+		}
+		break;
+	case 5:
+		/*
+		 * isb - mcr p15, 0, Rt, c7, c5, 4
+		 *
+		 * Taking an exception or returning from one acts as an
+		 * instruction barrier. So no explicit barrier needed here.
+		 */
+		trace_instruction_emulation(
+			"mcr p15, 0, Rt, c7, c5, 4 ; isb", regs->pc);
+		break;
+	}
+
+ret:
+	pr_warn_ratelimited("\"%s\" (%ld) uses deprecated CP15 Barrier instruction at 0x%llx\n",
+			current->comm, (unsigned long)current->pid, regs->pc);
+
+	arm64_skip_faulting_instruction(regs, 4);
+	return 0;
+}
+
+static int cp15_barrier_set_hw_mode(bool enable)
+{
+	if (enable)
+		sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_CP15BEN);
+	else
+		sysreg_clear_set(sctlr_el1, SCTLR_EL1_CP15BEN, 0);
+	return 0;
+}
+
+static bool try_emulate_cp15_barrier(struct pt_regs *regs, u32 insn)
+{
+	if (!compat_user_mode(regs) || compat_thumb_mode(regs))
+		return false;
+
+	if ((insn & 0x0fff0fdf) == 0x0e070f9a)
+		return cp15barrier_handler(regs, insn) == 0;
+
+	if ((insn & 0x0fff0fff) == 0x0e070f95)
+		return cp15barrier_handler(regs, insn) == 0;
+
+	return false;
+}
+
+static struct insn_emulation insn_cp15_barrier = {
+	.name = "cp15_barrier",
+	.status = INSN_DEPRECATED,
+	.try_emulate = try_emulate_cp15_barrier,
+	.set_hw_mode = cp15_barrier_set_hw_mode,
+};
+#endif /* CONFIG_CP15_BARRIER_EMULATION */
+
+#ifdef CONFIG_SETEND_EMULATION
+static int setend_set_hw_mode(bool enable)
+{
+	if (!cpu_supports_mixed_endian_el0())
+		return -EINVAL;
+
+	if (enable)
+		sysreg_clear_set(sctlr_el1, SCTLR_EL1_SED, 0);
+	else
+		sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_SED);
+	return 0;
+}
+
+static int compat_setend_handler(struct pt_regs *regs, u32 big_endian)
+{
+	char *insn;
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
+
+	if (big_endian) {
+		insn = "setend be";
+		regs->pstate |= PSR_AA32_E_BIT;
+	} else {
+		insn = "setend le";
+		regs->pstate &= ~PSR_AA32_E_BIT;
+	}
+
+	trace_instruction_emulation(insn, regs->pc);
+	pr_warn_ratelimited("\"%s\" (%ld) uses deprecated setend instruction at 0x%llx\n",
+			current->comm, (unsigned long)current->pid, regs->pc);
+
+	return 0;
+}
+
+static int a32_setend_handler(struct pt_regs *regs, u32 instr)
+{
+	int rc = compat_setend_handler(regs, (instr >> 9) & 1);
+	arm64_skip_faulting_instruction(regs, 4);
+	return rc;
+}
+
+static int t16_setend_handler(struct pt_regs *regs, u32 instr)
+{
+	int rc = compat_setend_handler(regs, (instr >> 3) & 1);
+	arm64_skip_faulting_instruction(regs, 2);
+	return rc;
+}
+
+static bool try_emulate_setend(struct pt_regs *regs, u32 insn)
+{
+	if (compat_thumb_mode(regs) &&
+	    (insn & 0xfffffff7) == 0x0000b650)
+		return t16_setend_handler(regs, insn) == 0;
+
+	if (compat_user_mode(regs) &&
+	    (insn & 0xfffffdff) == 0xf1010000)
+		return a32_setend_handler(regs, insn) == 0;
+
+	return false;
+}
+
+static struct insn_emulation insn_setend = {
+	.name = "setend",
+	.status = INSN_DEPRECATED,
+	.try_emulate = try_emulate_setend,
+	.set_hw_mode = setend_set_hw_mode,
+};
+#endif /* CONFIG_SETEND_EMULATION */
+
+static struct insn_emulation *insn_emulations[] = {
+#ifdef CONFIG_SWP_EMULATION
+	&insn_swp,
+#endif
+#ifdef CONFIG_CP15_BARRIER_EMULATION
+	&insn_cp15_barrier,
+#endif
+#ifdef CONFIG_SETEND_EMULATION
+	&insn_setend,
+#endif
+};
+
+static DEFINE_MUTEX(insn_emulation_mutex);
+
+static void enable_insn_hw_mode(void *data)
+{
+	struct insn_emulation *insn = data;
+	if (insn->set_hw_mode)
+		insn->set_hw_mode(true);
+}
+
+static void disable_insn_hw_mode(void *data)
+{
+	struct insn_emulation *insn = data;
+	if (insn->set_hw_mode)
+		insn->set_hw_mode(false);
+}
+
+/* Run set_hw_mode(mode) on all active CPUs */
+static int run_all_cpu_set_hw_mode(struct insn_emulation *insn, bool enable)
+{
+	if (!insn->set_hw_mode)
+		return -EINVAL;
+	if (enable)
+		on_each_cpu(enable_insn_hw_mode, (void *)insn, true);
+	else
+		on_each_cpu(disable_insn_hw_mode, (void *)insn, true);
+	return 0;
+}
+
+/*
+ * Run set_hw_mode for all insns on a starting CPU.
+ * Returns:
+ *  0 		- If all the hooks ran successfully.
+ * -EINVAL	- At least one hook is not supported by the CPU.
+ */
+static int run_all_insn_set_hw_mode(unsigned int cpu)
+{
+	int rc = 0;
+	unsigned long flags;
+
+	/*
+	 * Disable IRQs to serialize against an IPI from
+	 * run_all_cpu_set_hw_mode(), ensuring the HW is programmed to the most
+	 * recent enablement state if the two race with one another.
+	 */
+	local_irq_save(flags);
+	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
+		struct insn_emulation *insn = insn_emulations[i];
+		bool enable = READ_ONCE(insn->current_mode) == INSN_HW;
+		if (insn->set_hw_mode && insn->set_hw_mode(enable)) {
+			pr_warn("CPU[%u] cannot support the emulation of %s",
+				cpu, insn->name);
+			rc = -EINVAL;
+		}
+	}
+	local_irq_restore(flags);
+
+	return rc;
+}
+
+static int update_insn_emulation_mode(struct insn_emulation *insn,
+				       enum insn_emulation_mode prev)
+{
+	int ret = 0;
+
+	switch (prev) {
+	case INSN_UNDEF: /* Nothing to be done */
+		break;
+	case INSN_EMULATE:
+		break;
+	case INSN_HW:
+		if (!run_all_cpu_set_hw_mode(insn, false))
+			pr_notice("Disabled %s support\n", insn->name);
+		break;
+	}
+
+	switch (insn->current_mode) {
+	case INSN_UNDEF:
+		break;
+	case INSN_EMULATE:
+		break;
+	case INSN_HW:
+		ret = run_all_cpu_set_hw_mode(insn, true);
+		if (!ret)
+			pr_notice("Enabled %s support\n", insn->name);
+		break;
+	}
+
+	return ret;
+}
+
+static int emulation_proc_handler(struct ctl_table *table, int write,
+				  void *buffer, size_t *lenp,
+				  loff_t *ppos)
+{
+	int ret = 0;
+	struct insn_emulation *insn = container_of(table->data, struct insn_emulation, current_mode);
+	enum insn_emulation_mode prev_mode = insn->current_mode;
+
+	mutex_lock(&insn_emulation_mutex);
+	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+
+	if (ret || !write || prev_mode == insn->current_mode)
+		goto ret;
+
+	ret = update_insn_emulation_mode(insn, prev_mode);
+	if (ret) {
+		/* Mode change failed, revert to previous mode. */
+		WRITE_ONCE(insn->current_mode, prev_mode);
+		update_insn_emulation_mode(insn, INSN_UNDEF);
+	}
+ret:
+	mutex_unlock(&insn_emulation_mutex);
+	return ret;
+}
+
+static void __init register_insn_emulation(struct insn_emulation *insn)
+{
+	struct ctl_table *sysctl;
+
+	insn->min = INSN_UNDEF;
+
+	switch (insn->status) {
+	case INSN_DEPRECATED:
+		insn->current_mode = INSN_EMULATE;
+		/* Disable the HW mode if it was turned on at early boot time */
+		run_all_cpu_set_hw_mode(insn, false);
+		insn->max = INSN_HW;
+		break;
+	case INSN_OBSOLETE:
+		insn->current_mode = INSN_UNDEF;
+		insn->max = INSN_EMULATE;
+		break;
+	case INSN_UNAVAILABLE:
+		insn->current_mode = INSN_UNDEF;
+		insn->max = INSN_UNDEF;
+		break;
+	}
+
+	/* Program the HW if required */
+	update_insn_emulation_mode(insn, INSN_UNDEF);
+
+	if (insn->status != INSN_UNAVAILABLE) {
+		sysctl = &insn->sysctl[0];
+
+		sysctl->mode = 0644;
+		sysctl->maxlen = sizeof(int);
+
+		sysctl->procname = insn->name;
+		sysctl->data = &insn->current_mode;
+		sysctl->extra1 = &insn->min;
+		sysctl->extra2 = &insn->max;
+		sysctl->proc_handler = emulation_proc_handler;
+
+		register_sysctl_sz("abi", sysctl, 1);
+	}
+}
+
+bool try_emulate_armv8_deprecated(struct pt_regs *regs, u32 insn)
+{
+	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
+		struct insn_emulation *ie = insn_emulations[i];
+
+		if (ie->status == INSN_UNAVAILABLE)
+			continue;
+
+		/*
+		 * A trap may race with the mode being changed
+		 * INSN_EMULATE<->INSN_HW. Try to emulate the instruction to
+		 * avoid a spurious UNDEF.
+		 */
+		if (READ_ONCE(ie->current_mode) == INSN_UNDEF)
+			continue;
+
+		if (ie->try_emulate(regs, insn))
+			return true;
+	}
+
+	return false;
+}
+
+/*
+ * Invoked as core_initcall, which guarantees that the instruction
+ * emulation is ready for userspace.
+ */
+static int __init armv8_deprecated_init(void)
+{
+#ifdef CONFIG_SETEND_EMULATION
+	if (!system_supports_mixed_endian_el0()) {
+		insn_setend.status = INSN_UNAVAILABLE;
+		pr_info("setend instruction emulation is not supported on this system\n");
+	}
+
+#endif
+	for (int i = 0; i < ARRAY_SIZE(insn_emulations); i++) {
+		struct insn_emulation *ie = insn_emulations[i];
+
+		if (ie->status == INSN_UNAVAILABLE)
+			continue;
+
+		register_insn_emulation(ie);
+	}
+
+	cpuhp_setup_state_nocalls(CPUHP_AP_ARM64_ISNDEP_STARTING,
+				  "arm64/isndep:starting",
+				  run_all_insn_set_hw_mode, NULL);
+	return 0;
+}
+
+core_initcall(armv8_deprecated_init);
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
new file mode 100644
index 000000000..5ff1942b0
--- /dev/null
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/asm-offsets.c
+ *
+ * Copyright (C) 1995-2003 Russell King
+ *               2001-2002 Keith Owens
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/arm_sdei.h>
+#include <linux/sched.h>
+#include <linux/ftrace.h>
+#include <linux/kexec.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/kvm_host.h>
+#include <linux/preempt.h>
+#include <linux/suspend.h>
+#include <asm/cpufeature.h>
+#include <asm/fixmap.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/signal32.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
+
+int main(void)
+{
+  DEFINE(TSK_ACTIVE_MM,		offsetof(struct task_struct, active_mm));
+  BLANK();
+  DEFINE(TSK_TI_CPU,		offsetof(struct task_struct, thread_info.cpu));
+  DEFINE(TSK_TI_FLAGS,		offsetof(struct task_struct, thread_info.flags));
+  DEFINE(TSK_TI_PREEMPT,	offsetof(struct task_struct, thread_info.preempt_count));
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+  DEFINE(TSK_TI_TTBR0,		offsetof(struct task_struct, thread_info.ttbr0));
+#endif
+#ifdef CONFIG_SHADOW_CALL_STACK
+  DEFINE(TSK_TI_SCS_BASE,	offsetof(struct task_struct, thread_info.scs_base));
+  DEFINE(TSK_TI_SCS_SP,		offsetof(struct task_struct, thread_info.scs_sp));
+#endif
+  DEFINE(TSK_STACK,		offsetof(struct task_struct, stack));
+#ifdef CONFIG_STACKPROTECTOR
+  DEFINE(TSK_STACK_CANARY,	offsetof(struct task_struct, stack_canary));
+#endif
+  BLANK();
+  DEFINE(THREAD_CPU_CONTEXT,	offsetof(struct task_struct, thread.cpu_context));
+  DEFINE(THREAD_SCTLR_USER,	offsetof(struct task_struct, thread.sctlr_user));
+#ifdef CONFIG_ARM64_PTR_AUTH
+  DEFINE(THREAD_KEYS_USER,	offsetof(struct task_struct, thread.keys_user));
+#endif
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+  DEFINE(THREAD_KEYS_KERNEL,	offsetof(struct task_struct, thread.keys_kernel));
+#endif
+#ifdef CONFIG_ARM64_MTE
+  DEFINE(THREAD_MTE_CTRL,	offsetof(struct task_struct, thread.mte_ctrl));
+#endif
+  BLANK();
+  DEFINE(S_X0,			offsetof(struct pt_regs, regs[0]));
+  DEFINE(S_X2,			offsetof(struct pt_regs, regs[2]));
+  DEFINE(S_X4,			offsetof(struct pt_regs, regs[4]));
+  DEFINE(S_X6,			offsetof(struct pt_regs, regs[6]));
+  DEFINE(S_X8,			offsetof(struct pt_regs, regs[8]));
+  DEFINE(S_X10,			offsetof(struct pt_regs, regs[10]));
+  DEFINE(S_X12,			offsetof(struct pt_regs, regs[12]));
+  DEFINE(S_X14,			offsetof(struct pt_regs, regs[14]));
+  DEFINE(S_X16,			offsetof(struct pt_regs, regs[16]));
+  DEFINE(S_X18,			offsetof(struct pt_regs, regs[18]));
+  DEFINE(S_X20,			offsetof(struct pt_regs, regs[20]));
+  DEFINE(S_X22,			offsetof(struct pt_regs, regs[22]));
+  DEFINE(S_X24,			offsetof(struct pt_regs, regs[24]));
+  DEFINE(S_X26,			offsetof(struct pt_regs, regs[26]));
+  DEFINE(S_X28,			offsetof(struct pt_regs, regs[28]));
+  DEFINE(S_FP,			offsetof(struct pt_regs, regs[29]));
+  DEFINE(S_LR,			offsetof(struct pt_regs, regs[30]));
+  DEFINE(S_SP,			offsetof(struct pt_regs, sp));
+  DEFINE(S_PSTATE,		offsetof(struct pt_regs, pstate));
+  DEFINE(S_PC,			offsetof(struct pt_regs, pc));
+  DEFINE(S_SYSCALLNO,		offsetof(struct pt_regs, syscallno));
+  DEFINE(S_SDEI_TTBR1,		offsetof(struct pt_regs, sdei_ttbr1));
+  DEFINE(S_PMR_SAVE,		offsetof(struct pt_regs, pmr_save));
+  DEFINE(S_STACKFRAME,		offsetof(struct pt_regs, stackframe));
+  DEFINE(PT_REGS_SIZE,		sizeof(struct pt_regs));
+  BLANK();
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+  DEFINE(FREGS_X0,		offsetof(struct ftrace_regs, regs[0]));
+  DEFINE(FREGS_X2,		offsetof(struct ftrace_regs, regs[2]));
+  DEFINE(FREGS_X4,		offsetof(struct ftrace_regs, regs[4]));
+  DEFINE(FREGS_X6,		offsetof(struct ftrace_regs, regs[6]));
+  DEFINE(FREGS_X8,		offsetof(struct ftrace_regs, regs[8]));
+  DEFINE(FREGS_FP,		offsetof(struct ftrace_regs, fp));
+  DEFINE(FREGS_LR,		offsetof(struct ftrace_regs, lr));
+  DEFINE(FREGS_SP,		offsetof(struct ftrace_regs, sp));
+  DEFINE(FREGS_PC,		offsetof(struct ftrace_regs, pc));
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+  DEFINE(FREGS_DIRECT_TRAMP,	offsetof(struct ftrace_regs, direct_tramp));
+#endif
+  DEFINE(FREGS_SIZE,		sizeof(struct ftrace_regs));
+  BLANK();
+#endif
+#ifdef CONFIG_COMPAT
+  DEFINE(COMPAT_SIGFRAME_REGS_OFFSET,		offsetof(struct compat_sigframe, uc.uc_mcontext.arm_r0));
+  DEFINE(COMPAT_RT_SIGFRAME_REGS_OFFSET,	offsetof(struct compat_rt_sigframe, sig.uc.uc_mcontext.arm_r0));
+  BLANK();
+#endif
+  DEFINE(MM_CONTEXT_ID,		offsetof(struct mm_struct, context.id.counter));
+  BLANK();
+  DEFINE(VMA_VM_MM,		offsetof(struct vm_area_struct, vm_mm));
+  DEFINE(VMA_VM_FLAGS,		offsetof(struct vm_area_struct, vm_flags));
+  BLANK();
+  DEFINE(VM_EXEC,	       	VM_EXEC);
+  BLANK();
+  DEFINE(PAGE_SZ,	       	PAGE_SIZE);
+  BLANK();
+  DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
+  DEFINE(DMA_FROM_DEVICE,	DMA_FROM_DEVICE);
+  BLANK();
+  DEFINE(PREEMPT_DISABLE_OFFSET, PREEMPT_DISABLE_OFFSET);
+  DEFINE(SOFTIRQ_SHIFT, SOFTIRQ_SHIFT);
+  DEFINE(IRQ_CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
+  BLANK();
+  DEFINE(CPU_BOOT_TASK,		offsetof(struct secondary_data, task));
+  BLANK();
+  DEFINE(FTR_OVR_VAL_OFFSET,	offsetof(struct arm64_ftr_override, val));
+  DEFINE(FTR_OVR_MASK_OFFSET,	offsetof(struct arm64_ftr_override, mask));
+  BLANK();
+#ifdef CONFIG_KVM
+  DEFINE(VCPU_CONTEXT,		offsetof(struct kvm_vcpu, arch.ctxt));
+  DEFINE(VCPU_FAULT_DISR,	offsetof(struct kvm_vcpu, arch.fault.disr_el1));
+  DEFINE(VCPU_HCR_EL2,		offsetof(struct kvm_vcpu, arch.hcr_el2));
+  DEFINE(CPU_USER_PT_REGS,	offsetof(struct kvm_cpu_context, regs));
+  DEFINE(CPU_RGSR_EL1,		offsetof(struct kvm_cpu_context, sys_regs[RGSR_EL1]));
+  DEFINE(CPU_GCR_EL1,		offsetof(struct kvm_cpu_context, sys_regs[GCR_EL1]));
+  DEFINE(CPU_APIAKEYLO_EL1,	offsetof(struct kvm_cpu_context, sys_regs[APIAKEYLO_EL1]));
+  DEFINE(CPU_APIBKEYLO_EL1,	offsetof(struct kvm_cpu_context, sys_regs[APIBKEYLO_EL1]));
+  DEFINE(CPU_APDAKEYLO_EL1,	offsetof(struct kvm_cpu_context, sys_regs[APDAKEYLO_EL1]));
+  DEFINE(CPU_APDBKEYLO_EL1,	offsetof(struct kvm_cpu_context, sys_regs[APDBKEYLO_EL1]));
+  DEFINE(CPU_APGAKEYLO_EL1,	offsetof(struct kvm_cpu_context, sys_regs[APGAKEYLO_EL1]));
+  DEFINE(HOST_CONTEXT_VCPU,	offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
+  DEFINE(HOST_DATA_CONTEXT,	offsetof(struct kvm_host_data, host_ctxt));
+  DEFINE(NVHE_INIT_MAIR_EL2,	offsetof(struct kvm_nvhe_init_params, mair_el2));
+  DEFINE(NVHE_INIT_TCR_EL2,	offsetof(struct kvm_nvhe_init_params, tcr_el2));
+  DEFINE(NVHE_INIT_TPIDR_EL2,	offsetof(struct kvm_nvhe_init_params, tpidr_el2));
+  DEFINE(NVHE_INIT_STACK_HYP_VA,	offsetof(struct kvm_nvhe_init_params, stack_hyp_va));
+  DEFINE(NVHE_INIT_PGD_PA,	offsetof(struct kvm_nvhe_init_params, pgd_pa));
+  DEFINE(NVHE_INIT_HCR_EL2,	offsetof(struct kvm_nvhe_init_params, hcr_el2));
+  DEFINE(NVHE_INIT_VTTBR,	offsetof(struct kvm_nvhe_init_params, vttbr));
+  DEFINE(NVHE_INIT_VTCR,	offsetof(struct kvm_nvhe_init_params, vtcr));
+#endif
+#ifdef CONFIG_CPU_PM
+  DEFINE(CPU_CTX_SP,		offsetof(struct cpu_suspend_ctx, sp));
+  DEFINE(MPIDR_HASH_MASK,	offsetof(struct mpidr_hash, mask));
+  DEFINE(MPIDR_HASH_SHIFTS,	offsetof(struct mpidr_hash, shift_aff));
+  DEFINE(SLEEP_STACK_DATA_SYSTEM_REGS,	offsetof(struct sleep_stack_data, system_regs));
+  DEFINE(SLEEP_STACK_DATA_CALLEE_REGS,	offsetof(struct sleep_stack_data, callee_saved_regs));
+#endif
+  DEFINE(ARM_SMCCC_RES_X0_OFFS,		offsetof(struct arm_smccc_res, a0));
+  DEFINE(ARM_SMCCC_RES_X2_OFFS,		offsetof(struct arm_smccc_res, a2));
+  DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
+  DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
+  DEFINE(ARM_SMCCC_1_2_REGS_X0_OFFS,	offsetof(struct arm_smccc_1_2_regs, a0));
+  DEFINE(ARM_SMCCC_1_2_REGS_X2_OFFS,	offsetof(struct arm_smccc_1_2_regs, a2));
+  DEFINE(ARM_SMCCC_1_2_REGS_X4_OFFS,	offsetof(struct arm_smccc_1_2_regs, a4));
+  DEFINE(ARM_SMCCC_1_2_REGS_X6_OFFS,	offsetof(struct arm_smccc_1_2_regs, a6));
+  DEFINE(ARM_SMCCC_1_2_REGS_X8_OFFS,	offsetof(struct arm_smccc_1_2_regs, a8));
+  DEFINE(ARM_SMCCC_1_2_REGS_X10_OFFS,	offsetof(struct arm_smccc_1_2_regs, a10));
+  DEFINE(ARM_SMCCC_1_2_REGS_X12_OFFS,	offsetof(struct arm_smccc_1_2_regs, a12));
+  DEFINE(ARM_SMCCC_1_2_REGS_X14_OFFS,	offsetof(struct arm_smccc_1_2_regs, a14));
+  DEFINE(ARM_SMCCC_1_2_REGS_X16_OFFS,	offsetof(struct arm_smccc_1_2_regs, a16));
+  BLANK();
+  DEFINE(HIBERN_PBE_ORIG,	offsetof(struct pbe, orig_address));
+  DEFINE(HIBERN_PBE_ADDR,	offsetof(struct pbe, address));
+  DEFINE(HIBERN_PBE_NEXT,	offsetof(struct pbe, next));
+  DEFINE(ARM64_FTR_SYSVAL,	offsetof(struct arm64_ftr_reg, sys_val));
+  BLANK();
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+  DEFINE(TRAMP_VALIAS,		TRAMP_VALIAS);
+#endif
+#ifdef CONFIG_ARM_SDE_INTERFACE
+  DEFINE(SDEI_EVENT_INTREGS,	offsetof(struct sdei_registered_event, interrupted_regs));
+  DEFINE(SDEI_EVENT_PRIORITY,	offsetof(struct sdei_registered_event, priority));
+#endif
+#ifdef CONFIG_ARM64_PTR_AUTH
+  DEFINE(PTRAUTH_USER_KEY_APIA,		offsetof(struct ptrauth_keys_user, apia));
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+  DEFINE(PTRAUTH_KERNEL_KEY_APIA,	offsetof(struct ptrauth_keys_kernel, apia));
+#endif
+  BLANK();
+#endif
+#ifdef CONFIG_KEXEC_CORE
+  DEFINE(KIMAGE_ARCH_DTB_MEM,		offsetof(struct kimage, arch.dtb_mem));
+  DEFINE(KIMAGE_ARCH_EL2_VECTORS,	offsetof(struct kimage, arch.el2_vectors));
+  DEFINE(KIMAGE_ARCH_ZERO_PAGE,		offsetof(struct kimage, arch.zero_page));
+  DEFINE(KIMAGE_ARCH_PHYS_OFFSET,	offsetof(struct kimage, arch.phys_offset));
+  DEFINE(KIMAGE_ARCH_TTBR1,		offsetof(struct kimage, arch.ttbr1));
+  DEFINE(KIMAGE_HEAD,			offsetof(struct kimage, head));
+  DEFINE(KIMAGE_START,			offsetof(struct kimage, start));
+  BLANK();
+#endif
+#ifdef CONFIG_FUNCTION_TRACER
+  DEFINE(FTRACE_OPS_FUNC,		offsetof(struct ftrace_ops, func));
+#endif
+  BLANK();
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+  DEFINE(FGRET_REGS_X0,			offsetof(struct fgraph_ret_regs, regs[0]));
+  DEFINE(FGRET_REGS_X1,			offsetof(struct fgraph_ret_regs, regs[1]));
+  DEFINE(FGRET_REGS_X2,			offsetof(struct fgraph_ret_regs, regs[2]));
+  DEFINE(FGRET_REGS_X3,			offsetof(struct fgraph_ret_regs, regs[3]));
+  DEFINE(FGRET_REGS_X4,			offsetof(struct fgraph_ret_regs, regs[4]));
+  DEFINE(FGRET_REGS_X5,			offsetof(struct fgraph_ret_regs, regs[5]));
+  DEFINE(FGRET_REGS_X6,			offsetof(struct fgraph_ret_regs, regs[6]));
+  DEFINE(FGRET_REGS_X7,			offsetof(struct fgraph_ret_regs, regs[7]));
+  DEFINE(FGRET_REGS_FP,			offsetof(struct fgraph_ret_regs, fp));
+  DEFINE(FGRET_REGS_SIZE,		sizeof(struct fgraph_ret_regs));
+#endif
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+  DEFINE(FTRACE_OPS_DIRECT_CALL,	offsetof(struct ftrace_ops, direct_call));
+#endif
+  return 0;
+}
diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c
new file mode 100644
index 000000000..d9c9218fa
--- /dev/null
+++ b/arch/arm64/kernel/cacheinfo.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ARM64 cacheinfo support
+ *
+ *  Copyright (C) 2015 ARM Ltd.
+ *  All Rights Reserved
+ */
+
+#include <linux/acpi.h>
+#include <linux/cacheinfo.h>
+#include <linux/of.h>
+
+#define MAX_CACHE_LEVEL			7	/* Max 7 level supported */
+
+int cache_line_size(void)
+{
+	if (coherency_max_size != 0)
+		return coherency_max_size;
+
+	return cache_line_size_of_cpu();
+}
+EXPORT_SYMBOL_GPL(cache_line_size);
+
+static inline enum cache_type get_cache_type(int level)
+{
+	u64 clidr;
+
+	if (level > MAX_CACHE_LEVEL)
+		return CACHE_TYPE_NOCACHE;
+	clidr = read_sysreg(clidr_el1);
+	return CLIDR_CTYPE(clidr, level);
+}
+
+static void ci_leaf_init(struct cacheinfo *this_leaf,
+			 enum cache_type type, unsigned int level)
+{
+	this_leaf->level = level;
+	this_leaf->type = type;
+}
+
+static void detect_cache_level(unsigned int *level_p, unsigned int *leaves_p)
+{
+	unsigned int ctype, level, leaves;
+
+	for (level = 1, leaves = 0; level <= MAX_CACHE_LEVEL; level++) {
+		ctype = get_cache_type(level);
+		if (ctype == CACHE_TYPE_NOCACHE) {
+			level--;
+			break;
+		}
+		/* Separate instruction and data caches */
+		leaves += (ctype == CACHE_TYPE_SEPARATE) ? 2 : 1;
+	}
+
+	*level_p = level;
+	*leaves_p = leaves;
+}
+
+int early_cache_level(unsigned int cpu)
+{
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+
+	detect_cache_level(&this_cpu_ci->num_levels, &this_cpu_ci->num_leaves);
+
+	return 0;
+}
+
+int init_cache_level(unsigned int cpu)
+{
+	unsigned int level, leaves;
+	int fw_level, ret;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+
+	detect_cache_level(&level, &leaves);
+
+	if (acpi_disabled) {
+		fw_level = of_find_last_cache_level(cpu);
+	} else {
+		ret = acpi_get_cache_info(cpu, &fw_level, NULL);
+		if (ret < 0)
+			fw_level = 0;
+	}
+
+	if (level < fw_level) {
+		/*
+		 * some external caches not specified in CLIDR_EL1
+		 * the information may be available in the device tree
+		 * only unified external caches are considered here
+		 */
+		leaves += (fw_level - level);
+		level = fw_level;
+	}
+
+	this_cpu_ci->num_levels = level;
+	this_cpu_ci->num_leaves = leaves;
+	return 0;
+}
+
+int populate_cache_leaves(unsigned int cpu)
+{
+	unsigned int level, idx;
+	enum cache_type type;
+	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
+	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
+
+	for (idx = 0, level = 1; level <= this_cpu_ci->num_levels &&
+	     idx < this_cpu_ci->num_leaves; idx++, level++) {
+		type = get_cache_type(level);
+		if (type == CACHE_TYPE_SEPARATE) {
+			ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
+			ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
+		} else {
+			ci_leaf_init(this_leaf++, type, level);
+		}
+	}
+	return 0;
+}
diff --git a/arch/arm64/kernel/compat_alignment.c b/arch/arm64/kernel/compat_alignment.c
new file mode 100644
index 000000000..deff21bfa
--- /dev/null
+++ b/arch/arm64/kernel/compat_alignment.c
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// based on arch/arm/mm/alignment.c
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+
+#include <asm/exception.h>
+#include <asm/ptrace.h>
+#include <asm/traps.h>
+
+/*
+ * 32-bit misaligned trap handler (c) 1998 San Mehat (CCC) -July 1998
+ *
+ * Speed optimisations and better fault handling by Russell King.
+ */
+#define CODING_BITS(i)	(i & 0x0e000000)
+
+#define LDST_P_BIT(i)	(i & (1 << 24))		/* Preindex		*/
+#define LDST_U_BIT(i)	(i & (1 << 23))		/* Add offset		*/
+#define LDST_W_BIT(i)	(i & (1 << 21))		/* Writeback		*/
+#define LDST_L_BIT(i)	(i & (1 << 20))		/* Load			*/
+
+#define LDST_P_EQ_U(i)	((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
+
+#define LDSTHD_I_BIT(i)	(i & (1 << 22))		/* double/half-word immed */
+
+#define RN_BITS(i)	((i >> 16) & 15)	/* Rn			*/
+#define RD_BITS(i)	((i >> 12) & 15)	/* Rd			*/
+#define RM_BITS(i)	(i & 15)		/* Rm			*/
+
+#define REGMASK_BITS(i)	(i & 0xffff)
+
+#define BAD_INSTR 	0xdeadc0de
+
+/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */
+#define IS_T32(hi16) \
+	(((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800))
+
+union offset_union {
+	unsigned long un;
+	  signed long sn;
+};
+
+#define TYPE_ERROR	0
+#define TYPE_FAULT	1
+#define TYPE_LDST	2
+#define TYPE_DONE	3
+
+static void
+do_alignment_finish_ldst(unsigned long addr, u32 instr, struct pt_regs *regs,
+			 union offset_union offset)
+{
+	if (!LDST_U_BIT(instr))
+		offset.un = -offset.un;
+
+	if (!LDST_P_BIT(instr))
+		addr += offset.un;
+
+	if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
+		regs->regs[RN_BITS(instr)] = addr;
+}
+
+static int
+do_alignment_ldrdstrd(unsigned long addr, u32 instr, struct pt_regs *regs)
+{
+	unsigned int rd = RD_BITS(instr);
+	unsigned int rd2;
+	int load;
+
+	if ((instr & 0xfe000000) == 0xe8000000) {
+		/* ARMv7 Thumb-2 32-bit LDRD/STRD */
+		rd2 = (instr >> 8) & 0xf;
+		load = !!(LDST_L_BIT(instr));
+	} else if (((rd & 1) == 1) || (rd == 14)) {
+		return TYPE_ERROR;
+	} else {
+		load = ((instr & 0xf0) == 0xd0);
+		rd2 = rd + 1;
+	}
+
+	if (load) {
+		unsigned int val, val2;
+
+		if (get_user(val, (u32 __user *)addr) ||
+		    get_user(val2, (u32 __user *)(addr + 4)))
+			return TYPE_FAULT;
+		regs->regs[rd] = val;
+		regs->regs[rd2] = val2;
+	} else {
+		if (put_user(regs->regs[rd], (u32 __user *)addr) ||
+		    put_user(regs->regs[rd2], (u32 __user *)(addr + 4)))
+			return TYPE_FAULT;
+	}
+	return TYPE_LDST;
+}
+
+/*
+ * LDM/STM alignment handler.
+ *
+ * There are 4 variants of this instruction:
+ *
+ * B = rn pointer before instruction, A = rn pointer after instruction
+ *              ------ increasing address ----->
+ *	        |    | r0 | r1 | ... | rx |    |
+ * PU = 01             B                    A
+ * PU = 11        B                    A
+ * PU = 00        A                    B
+ * PU = 10             A                    B
+ */
+static int
+do_alignment_ldmstm(unsigned long addr, u32 instr, struct pt_regs *regs)
+{
+	unsigned int rd, rn, nr_regs, regbits;
+	unsigned long eaddr, newaddr;
+	unsigned int val;
+
+	/* count the number of registers in the mask to be transferred */
+	nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
+
+	rn = RN_BITS(instr);
+	newaddr = eaddr = regs->regs[rn];
+
+	if (!LDST_U_BIT(instr))
+		nr_regs = -nr_regs;
+	newaddr += nr_regs;
+	if (!LDST_U_BIT(instr))
+		eaddr = newaddr;
+
+	if (LDST_P_EQ_U(instr))	/* U = P */
+		eaddr += 4;
+
+	for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
+	     regbits >>= 1, rd += 1)
+		if (regbits & 1) {
+			if (LDST_L_BIT(instr)) {
+				if (get_user(val, (u32 __user *)eaddr))
+					return TYPE_FAULT;
+				if (rd < 15)
+					regs->regs[rd] = val;
+				else
+					regs->pc = val;
+			} else {
+				/*
+				 * The PC register has a bias of +8 in ARM mode
+				 * and +4 in Thumb mode. This means that a read
+				 * of the value of PC should account for this.
+				 * Since Thumb does not permit STM instructions
+				 * to refer to PC, just add 8 here.
+				 */
+				val = (rd < 15) ? regs->regs[rd] : regs->pc + 8;
+				if (put_user(val, (u32 __user *)eaddr))
+					return TYPE_FAULT;
+			}
+			eaddr += 4;
+		}
+
+	if (LDST_W_BIT(instr))
+		regs->regs[rn] = newaddr;
+
+	return TYPE_DONE;
+}
+
+/*
+ * Convert Thumb multi-word load/store instruction forms to equivalent ARM
+ * instructions so we can reuse ARM userland alignment fault fixups for Thumb.
+ *
+ * This implementation was initially based on the algorithm found in
+ * gdb/sim/arm/thumbemu.c. It is basically just a code reduction of same
+ * to convert only Thumb ld/st instruction forms to equivalent ARM forms.
+ *
+ * NOTES:
+ * 1. Comments below refer to ARM ARM DDI0100E Thumb Instruction sections.
+ * 2. If for some reason we're passed an non-ld/st Thumb instruction to
+ *    decode, we return 0xdeadc0de. This should never happen under normal
+ *    circumstances but if it does, we've got other problems to deal with
+ *    elsewhere and we obviously can't fix those problems here.
+ */
+
+static unsigned long thumb2arm(u16 tinstr)
+{
+	u32 L = (tinstr & (1<<11)) >> 11;
+
+	switch ((tinstr & 0xf800) >> 11) {
+	/* 6.6.1 Format 1: */
+	case 0xc000 >> 11:				/* 7.1.51 STMIA */
+	case 0xc800 >> 11:				/* 7.1.25 LDMIA */
+		{
+			u32 Rn = (tinstr & (7<<8)) >> 8;
+			u32 W = ((L<<Rn) & (tinstr&255)) ? 0 : 1<<21;
+
+			return 0xe8800000 | W | (L<<20) | (Rn<<16) |
+				(tinstr&255);
+		}
+
+	/* 6.6.1 Format 2: */
+	case 0xb000 >> 11:				/* 7.1.48 PUSH */
+	case 0xb800 >> 11:				/* 7.1.47 POP */
+		if ((tinstr & (3 << 9)) == 0x0400) {
+			static const u32 subset[4] = {
+				0xe92d0000,	/* STMDB sp!,{registers} */
+				0xe92d4000,	/* STMDB sp!,{registers,lr} */
+				0xe8bd0000,	/* LDMIA sp!,{registers} */
+				0xe8bd8000	/* LDMIA sp!,{registers,pc} */
+			};
+			return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] |
+			    (tinstr & 255);		/* register_list */
+		}
+		fallthrough;	/* for illegal instruction case */
+
+	default:
+		return BAD_INSTR;
+	}
+}
+
+/*
+ * Convert Thumb-2 32 bit LDM, STM, LDRD, STRD to equivalent instruction
+ * handlable by ARM alignment handler, also find the corresponding handler,
+ * so that we can reuse ARM userland alignment fault fixups for Thumb.
+ *
+ * @pinstr: original Thumb-2 instruction; returns new handlable instruction
+ * @regs: register context.
+ * @poffset: return offset from faulted addr for later writeback
+ *
+ * NOTES:
+ * 1. Comments below refer to ARMv7 DDI0406A Thumb Instruction sections.
+ * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
+ */
+static void *
+do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs,
+			    union offset_union *poffset)
+{
+	u32 instr = *pinstr;
+	u16 tinst1 = (instr >> 16) & 0xffff;
+	u16 tinst2 = instr & 0xffff;
+
+	switch (tinst1 & 0xffe0) {
+	/* A6.3.5 Load/Store multiple */
+	case 0xe880:		/* STM/STMIA/STMEA,LDM/LDMIA, PUSH/POP T2 */
+	case 0xe8a0:		/* ...above writeback version */
+	case 0xe900:		/* STMDB/STMFD, LDMDB/LDMEA */
+	case 0xe920:		/* ...above writeback version */
+		/* no need offset decision since handler calculates it */
+		return do_alignment_ldmstm;
+
+	case 0xf840:		/* POP/PUSH T3 (single register) */
+		if (RN_BITS(instr) == 13 && (tinst2 & 0x09ff) == 0x0904) {
+			u32 L = !!(LDST_L_BIT(instr));
+			const u32 subset[2] = {
+				0xe92d0000,	/* STMDB sp!,{registers} */
+				0xe8bd0000,	/* LDMIA sp!,{registers} */
+			};
+			*pinstr = subset[L] | (1<<RD_BITS(instr));
+			return do_alignment_ldmstm;
+		}
+		/* Else fall through for illegal instruction case */
+		break;
+
+	/* A6.3.6 Load/store double, STRD/LDRD(immed, lit, reg) */
+	case 0xe860:
+	case 0xe960:
+	case 0xe8e0:
+	case 0xe9e0:
+		poffset->un = (tinst2 & 0xff) << 2;
+		fallthrough;
+
+	case 0xe940:
+	case 0xe9c0:
+		return do_alignment_ldrdstrd;
+
+	/*
+	 * No need to handle load/store instructions up to word size
+	 * since ARMv6 and later CPUs can perform unaligned accesses.
+	 */
+	default:
+		break;
+	}
+	return NULL;
+}
+
+static int alignment_get_arm(struct pt_regs *regs, __le32 __user *ip, u32 *inst)
+{
+	__le32 instr = 0;
+	int fault;
+
+	fault = get_user(instr, ip);
+	if (fault)
+		return fault;
+
+	*inst = __le32_to_cpu(instr);
+	return 0;
+}
+
+static int alignment_get_thumb(struct pt_regs *regs, __le16 __user *ip, u16 *inst)
+{
+	__le16 instr = 0;
+	int fault;
+
+	fault = get_user(instr, ip);
+	if (fault)
+		return fault;
+
+	*inst = __le16_to_cpu(instr);
+	return 0;
+}
+
+int do_compat_alignment_fixup(unsigned long addr, struct pt_regs *regs)
+{
+	union offset_union offset;
+	unsigned long instrptr;
+	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
+	unsigned int type;
+	u32 instr = 0;
+	int isize = 4;
+	int thumb2_32b = 0;
+
+	instrptr = instruction_pointer(regs);
+
+	if (compat_thumb_mode(regs)) {
+		__le16 __user *ptr = (__le16 __user *)(instrptr & ~1);
+		u16 tinstr, tinst2;
+
+		if (alignment_get_thumb(regs, ptr, &tinstr))
+			return 1;
+
+		if (IS_T32(tinstr)) { /* Thumb-2 32-bit */
+			if (alignment_get_thumb(regs, ptr + 1, &tinst2))
+				return 1;
+			instr = ((u32)tinstr << 16) | tinst2;
+			thumb2_32b = 1;
+		} else {
+			isize = 2;
+			instr = thumb2arm(tinstr);
+		}
+	} else {
+		if (alignment_get_arm(regs, (__le32 __user *)instrptr, &instr))
+			return 1;
+	}
+
+	switch (CODING_BITS(instr)) {
+	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
+		if (LDSTHD_I_BIT(instr))
+			offset.un = (instr & 0xf00) >> 4 | (instr & 15);
+		else
+			offset.un = regs->regs[RM_BITS(instr)];
+
+		if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
+		    (instr & 0x001000f0) == 0x000000f0)   /* STRD */
+			handler = do_alignment_ldrdstrd;
+		else
+			return 1;
+		break;
+
+	case 0x08000000:	/* ldm or stm, or thumb-2 32bit instruction */
+		if (thumb2_32b) {
+			offset.un = 0;
+			handler = do_alignment_t32_to_handler(&instr, regs, &offset);
+		} else {
+			offset.un = 0;
+			handler = do_alignment_ldmstm;
+		}
+		break;
+
+	default:
+		return 1;
+	}
+
+	type = handler(addr, instr, regs);
+
+	if (type == TYPE_ERROR || type == TYPE_FAULT)
+		return 1;
+
+	if (type == TYPE_LDST)
+		do_alignment_finish_ldst(addr, instr, regs, offset);
+
+	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, regs->pc);
+	arm64_skip_faulting_instruction(regs, isize);
+
+	return 0;
+}
diff --git a/arch/arm64/kernel/cpu-reset.S b/arch/arm64/kernel/cpu-reset.S
new file mode 100644
index 000000000..c87445dde
--- /dev/null
+++ b/arch/arm64/kernel/cpu-reset.S
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * CPU reset routines
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 2015 Huawei Futurewei Technologies.
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+#include <asm/sysreg.h>
+#include <asm/virt.h>
+
+.text
+.pushsection    .idmap.text, "a"
+
+/*
+ * cpu_soft_restart(el2_switch, entry, arg0, arg1, arg2)
+ *
+ * @el2_switch: Flag to indicate a switch to EL2 is needed.
+ * @entry: Location to jump to for soft reset.
+ * arg0: First argument passed to @entry. (relocation list)
+ * arg1: Second argument passed to @entry.(physical kernel entry)
+ * arg2: Third argument passed to @entry. (physical dtb address)
+ *
+ * Put the CPU into the same state as it would be if it had been reset, and
+ * branch to what would be the reset vector. It must be executed with the
+ * flat identity mapping.
+ */
+SYM_TYPED_FUNC_START(cpu_soft_restart)
+	mov_q	x12, INIT_SCTLR_EL1_MMU_OFF
+	pre_disable_mmu_workaround
+	/*
+	 * either disable EL1&0 translation regime or disable EL2&0 translation
+	 * regime if HCR_EL2.E2H == 1
+	 */
+	msr	sctlr_el1, x12
+	isb
+
+	cbz	x0, 1f				// el2_switch?
+	mov	x0, #HVC_SOFT_RESTART
+	hvc	#0				// no return
+
+1:	mov	x8, x1				// entry
+	mov	x0, x2				// arg0
+	mov	x1, x3				// arg1
+	mov	x2, x4				// arg2
+	br	x8
+SYM_FUNC_END(cpu_soft_restart)
+
+.popsection
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
new file mode 100644
index 000000000..87787a012
--- /dev/null
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -0,0 +1,763 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Contains CPU specific errata definitions
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/types.h>
+#include <linux/cpu.h>
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpufeature.h>
+#include <asm/kvm_asm.h>
+#include <asm/smp_plat.h>
+
+static bool __maybe_unused
+is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	const struct arm64_midr_revidr *fix;
+	u32 midr = read_cpuid_id(), revidr;
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	if (!is_midr_in_range(midr, &entry->midr_range))
+		return false;
+
+	midr &= MIDR_REVISION_MASK | MIDR_VARIANT_MASK;
+	revidr = read_cpuid(REVIDR_EL1);
+	for (fix = entry->fixed_revs; fix && fix->revidr_mask; fix++)
+		if (midr == fix->midr_rv && (revidr & fix->revidr_mask))
+			return false;
+
+	return true;
+}
+
+static bool __maybe_unused
+is_affected_midr_range_list(const struct arm64_cpu_capabilities *entry,
+			    int scope)
+{
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	return is_midr_in_range_list(read_cpuid_id(), entry->midr_range_list);
+}
+
+static bool __maybe_unused
+is_kryo_midr(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	u32 model;
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	model = read_cpuid_id();
+	model &= MIDR_IMPLEMENTOR_MASK | (0xf00 << MIDR_PARTNUM_SHIFT) |
+		 MIDR_ARCHITECTURE_MASK;
+
+	return model == entry->midr_range.model;
+}
+
+static bool
+has_mismatched_cache_type(const struct arm64_cpu_capabilities *entry,
+			  int scope)
+{
+	u64 mask = arm64_ftr_reg_ctrel0.strict_mask;
+	u64 sys = arm64_ftr_reg_ctrel0.sys_val & mask;
+	u64 ctr_raw, ctr_real;
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	/*
+	 * We want to make sure that all the CPUs in the system expose
+	 * a consistent CTR_EL0 to make sure that applications behaves
+	 * correctly with migration.
+	 *
+	 * If a CPU has CTR_EL0.IDC but does not advertise it via CTR_EL0 :
+	 *
+	 * 1) It is safe if the system doesn't support IDC, as CPU anyway
+	 *    reports IDC = 0, consistent with the rest.
+	 *
+	 * 2) If the system has IDC, it is still safe as we trap CTR_EL0
+	 *    access on this CPU via the ARM64_HAS_CACHE_IDC capability.
+	 *
+	 * So, we need to make sure either the raw CTR_EL0 or the effective
+	 * CTR_EL0 matches the system's copy to allow a secondary CPU to boot.
+	 */
+	ctr_raw = read_cpuid_cachetype() & mask;
+	ctr_real = read_cpuid_effective_cachetype() & mask;
+
+	return (ctr_real != sys) && (ctr_raw != sys);
+}
+
+static void
+cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *cap)
+{
+	u64 mask = arm64_ftr_reg_ctrel0.strict_mask;
+	bool enable_uct_trap = false;
+
+	/* Trap CTR_EL0 access on this CPU, only if it has a mismatch */
+	if ((read_cpuid_cachetype() & mask) !=
+	    (arm64_ftr_reg_ctrel0.sys_val & mask))
+		enable_uct_trap = true;
+
+	/* ... or if the system is affected by an erratum */
+	if (cap->capability == ARM64_WORKAROUND_1542419)
+		enable_uct_trap = true;
+
+	if (enable_uct_trap)
+		sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0);
+}
+
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+static bool
+has_cortex_a76_erratum_1463225(const struct arm64_cpu_capabilities *entry,
+			       int scope)
+{
+	return is_affected_midr_range_list(entry, scope) && is_kernel_in_hyp_mode();
+}
+#endif
+
+static void __maybe_unused
+cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused)
+{
+	sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0);
+}
+
+static DEFINE_RAW_SPINLOCK(reg_user_mask_modification);
+static void __maybe_unused
+cpu_clear_bf16_from_user_emulation(const struct arm64_cpu_capabilities *__unused)
+{
+	struct arm64_ftr_reg *regp;
+
+	regp = get_arm64_ftr_reg(SYS_ID_AA64ISAR1_EL1);
+	if (!regp)
+		return;
+
+	raw_spin_lock(&reg_user_mask_modification);
+	if (regp->user_mask & ID_AA64ISAR1_EL1_BF16_MASK)
+		regp->user_mask &= ~ID_AA64ISAR1_EL1_BF16_MASK;
+	raw_spin_unlock(&reg_user_mask_modification);
+}
+
+#define CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max)	\
+	.matches = is_affected_midr_range,			\
+	.midr_range = MIDR_RANGE(model, v_min, r_min, v_max, r_max)
+
+#define CAP_MIDR_ALL_VERSIONS(model)					\
+	.matches = is_affected_midr_range,				\
+	.midr_range = MIDR_ALL_VERSIONS(model)
+
+#define MIDR_FIXED(rev, revidr_mask) \
+	.fixed_revs = (struct arm64_midr_revidr[]){{ (rev), (revidr_mask) }, {}}
+
+#define ERRATA_MIDR_RANGE(model, v_min, r_min, v_max, r_max)		\
+	.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,				\
+	CAP_MIDR_RANGE(model, v_min, r_min, v_max, r_max)
+
+#define CAP_MIDR_RANGE_LIST(list)				\
+	.matches = is_affected_midr_range_list,			\
+	.midr_range_list = list
+
+/* Errata affecting a range of revisions of  given model variant */
+#define ERRATA_MIDR_REV_RANGE(m, var, r_min, r_max)	 \
+	ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
+
+/* Errata affecting a single variant/revision of a model */
+#define ERRATA_MIDR_REV(model, var, rev)	\
+	ERRATA_MIDR_RANGE(model, var, rev, var, rev)
+
+/* Errata affecting all variants/revisions of a given a model */
+#define ERRATA_MIDR_ALL_VERSIONS(model)				\
+	.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,			\
+	CAP_MIDR_ALL_VERSIONS(model)
+
+/* Errata affecting a list of midr ranges, with same work around */
+#define ERRATA_MIDR_RANGE_LIST(midr_list)			\
+	.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,			\
+	CAP_MIDR_RANGE_LIST(midr_list)
+
+static const __maybe_unused struct midr_range tx2_family_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
+	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
+	{},
+};
+
+static bool __maybe_unused
+needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry,
+			 int scope)
+{
+	int i;
+
+	if (!is_affected_midr_range_list(entry, scope) ||
+	    !is_hyp_mode_available())
+		return false;
+
+	for_each_possible_cpu(i) {
+		if (MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0) != 0)
+			return true;
+	}
+
+	return false;
+}
+
+static bool __maybe_unused
+has_neoverse_n1_erratum_1542419(const struct arm64_cpu_capabilities *entry,
+				int scope)
+{
+	u32 midr = read_cpuid_id();
+	bool has_dic = read_cpuid_cachetype() & BIT(CTR_EL0_DIC_SHIFT);
+	const struct midr_range range = MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1);
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	return is_midr_in_range(midr, &range) && has_dic;
+}
+
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+	{
+		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0)
+	},
+	{
+		.midr_range.model = MIDR_QCOM_KRYO,
+		.matches = is_kryo_midr,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1286807
+	{
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+	},
+	{
+		/* Kryo4xx Gold (rcpe to rfpe) => (r0p0 to r3p0) */
+		ERRATA_MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xe),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2441007
+	{
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2441009
+	{
+		/* Cortex-A510 r0p0 -> r1p1. Fixed in r1p2 */
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1),
+	},
+#endif
+	{},
+};
+#endif
+
+#ifdef CONFIG_CAVIUM_ERRATUM_23154
+static const struct midr_range cavium_erratum_23154_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_THUNDERX),
+	MIDR_ALL_VERSIONS(MIDR_THUNDERX_81XX),
+	MIDR_ALL_VERSIONS(MIDR_THUNDERX_83XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_98XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_96XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XXN),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XXMM),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XXO),
+	{},
+};
+#endif
+
+#ifdef CONFIG_CAVIUM_ERRATUM_27456
+const struct midr_range cavium_erratum_27456_cpus[] = {
+	/* Cavium ThunderX, T88 pass 1.x - 2.1 */
+	MIDR_RANGE(MIDR_THUNDERX, 0, 0, 1, 1),
+	/* Cavium ThunderX, T81 pass 1.0 */
+	MIDR_REV(MIDR_THUNDERX_81XX, 0, 0),
+	{},
+};
+#endif
+
+#ifdef CONFIG_CAVIUM_ERRATUM_30115
+static const struct midr_range cavium_erratum_30115_cpus[] = {
+	/* Cavium ThunderX, T88 pass 1.x - 2.2 */
+	MIDR_RANGE(MIDR_THUNDERX, 0, 0, 1, 2),
+	/* Cavium ThunderX, T81 pass 1.0 - 1.2 */
+	MIDR_REV_RANGE(MIDR_THUNDERX_81XX, 0, 0, 2),
+	/* Cavium ThunderX, T83 pass 1.0 */
+	MIDR_REV(MIDR_THUNDERX_83XX, 0, 0),
+	{},
+};
+#endif
+
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003
+static const struct arm64_cpu_capabilities qcom_erratum_1003_list[] = {
+	{
+		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0),
+	},
+	{
+		.midr_range.model = MIDR_QCOM_KRYO,
+		.matches = is_kryo_midr,
+	},
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
+static const struct midr_range workaround_clean_cache[] = {
+#if	defined(CONFIG_ARM64_ERRATUM_826319) || \
+	defined(CONFIG_ARM64_ERRATUM_827319) || \
+	defined(CONFIG_ARM64_ERRATUM_824069)
+	/* Cortex-A53 r0p[012]: ARM errata 826319, 827319, 824069 */
+	MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 2),
+#endif
+#ifdef	CONFIG_ARM64_ERRATUM_819472
+	/* Cortex-A53 r0p[01] : ARM errata 819472 */
+	MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 1),
+#endif
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+/*
+ * - 1188873 affects r0p0 to r2p0
+ * - 1418040 affects r0p0 to r3p1
+ */
+static const struct midr_range erratum_1418040_list[] = {
+	/* Cortex-A76 r0p0 to r3p1 */
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1),
+	/* Neoverse-N1 r0p0 to r3p1 */
+	MIDR_RANGE(MIDR_NEOVERSE_N1, 0, 0, 3, 1),
+	/* Kryo4xx Gold (rcpe to rfpf) => (r0p0 to r3p1) */
+	MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xf),
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_845719
+static const struct midr_range erratum_845719_list[] = {
+	/* Cortex-A53 r0p[01234] */
+	MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+	/* Brahma-B53 r0p[0] */
+	MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+	/* Kryo2XX Silver rAp4 */
+	MIDR_REV(MIDR_QCOM_KRYO_2XX_SILVER, 0xa, 0x4),
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_843419
+static const struct arm64_cpu_capabilities erratum_843419_list[] = {
+	{
+		/* Cortex-A53 r0p[01234] */
+		.matches = is_affected_midr_range,
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+		MIDR_FIXED(0x4, BIT(8)),
+	},
+	{
+		/* Brahma-B53 r0p[0] */
+		.matches = is_affected_midr_range,
+		ERRATA_MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+	},
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT
+static const struct midr_range erratum_speculative_at_list[] = {
+#ifdef CONFIG_ARM64_ERRATUM_1165522
+	/* Cortex A76 r0p0 to r2p0 */
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 2, 0),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1319367
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1530923
+	/* Cortex A55 r0p0 to r2p0 */
+	MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 2, 0),
+	/* Kryo4xx Silver (rdpe => r1p0) */
+	MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
+#endif
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+static const struct midr_range erratum_1463225[] = {
+	/* Cortex-A76 r0p0 - r3p1 */
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1),
+	/* Kryo4xx Gold (rcpe to rfpf) => (r0p0 to r3p1) */
+	MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xf),
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+static const struct midr_range trbe_overwrite_fill_mode_cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_2139208
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2119858
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_RANGE(MIDR_CORTEX_X2, 0, 0, 2, 0),
+#endif
+	{},
+};
+#endif	/* CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE */
+
+#ifdef CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+static const struct midr_range tsb_flush_fail_cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_2067961
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2054223
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+#endif
+	{},
+};
+#endif	/* CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE */
+
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+static struct midr_range trbe_write_out_of_range_cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_2253138
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2224489
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+	MIDR_RANGE(MIDR_CORTEX_X2, 0, 0, 2, 0),
+#endif
+	{},
+};
+#endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
+
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+static struct midr_range broken_aarch32_aes[] = {
+	MIDR_RANGE(MIDR_CORTEX_A57, 0, 1, 0xf, 0xf),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+	{},
+};
+#endif /* CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE */
+
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+static const struct midr_range erratum_spec_unpriv_load_list[] = {
+#ifdef CONFIG_ARM64_ERRATUM_3117295
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A510),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2966298
+	/* Cortex-A520 r0p0 to r0p1 */
+	MIDR_REV_RANGE(MIDR_CORTEX_A520, 0, 0, 1),
+#endif
+	{},
+};
+#endif
+
+const struct arm64_cpu_capabilities arm64_errata[] = {
+#ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
+	{
+		.desc = "ARM errata 826319, 827319, 824069, or 819472",
+		.capability = ARM64_WORKAROUND_CLEAN_CACHE,
+		ERRATA_MIDR_RANGE_LIST(workaround_clean_cache),
+		.cpu_enable = cpu_enable_cache_maint_trap,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_832075
+	{
+	/* Cortex-A57 r0p0 - r1p2 */
+		.desc = "ARM erratum 832075",
+		.capability = ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE,
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A57,
+				  0, 0,
+				  1, 2),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_834220
+	{
+	/* Cortex-A57 r0p0 - r1p2 */
+		.desc = "ARM erratum 834220",
+		.capability = ARM64_WORKAROUND_834220,
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A57,
+				  0, 0,
+				  1, 2),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_843419
+	{
+		.desc = "ARM erratum 843419",
+		.capability = ARM64_WORKAROUND_843419,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = cpucap_multi_entry_cap_matches,
+		.match_list = erratum_843419_list,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_845719
+	{
+		.desc = "ARM erratum 845719",
+		.capability = ARM64_WORKAROUND_845719,
+		ERRATA_MIDR_RANGE_LIST(erratum_845719_list),
+	},
+#endif
+#ifdef CONFIG_CAVIUM_ERRATUM_23154
+	{
+		.desc = "Cavium errata 23154 and 38545",
+		.capability = ARM64_WORKAROUND_CAVIUM_23154,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		ERRATA_MIDR_RANGE_LIST(cavium_erratum_23154_cpus),
+	},
+#endif
+#ifdef CONFIG_CAVIUM_ERRATUM_27456
+	{
+		.desc = "Cavium erratum 27456",
+		.capability = ARM64_WORKAROUND_CAVIUM_27456,
+		ERRATA_MIDR_RANGE_LIST(cavium_erratum_27456_cpus),
+	},
+#endif
+#ifdef CONFIG_CAVIUM_ERRATUM_30115
+	{
+		.desc = "Cavium erratum 30115",
+		.capability = ARM64_WORKAROUND_CAVIUM_30115,
+		ERRATA_MIDR_RANGE_LIST(cavium_erratum_30115_cpus),
+	},
+#endif
+	{
+		.desc = "Mismatched cache type (CTR_EL0)",
+		.capability = ARM64_MISMATCHED_CACHE_TYPE,
+		.matches = has_mismatched_cache_type,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.cpu_enable = cpu_enable_trap_ctr_access,
+	},
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003
+	{
+		.desc = "Qualcomm Technologies Falkor/Kryo erratum 1003",
+		.capability = ARM64_WORKAROUND_QCOM_FALKOR_E1003,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = cpucap_multi_entry_cap_matches,
+		.match_list = qcom_erratum_1003_list,
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+	{
+		.desc = "Qualcomm erratum 1009, or ARM erratum 1286807, 2441009",
+		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = cpucap_multi_entry_cap_matches,
+		.match_list = arm64_repeat_tlbi_list,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_858921
+	{
+	/* Cortex-A73 all versions */
+		.desc = "ARM erratum 858921",
+		.capability = ARM64_WORKAROUND_858921,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
+	},
+#endif
+	{
+		.desc = "Spectre-v2",
+		.capability = ARM64_SPECTRE_V2,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_spectre_v2,
+		.cpu_enable = spectre_v2_enable_mitigation,
+	},
+#ifdef CONFIG_RANDOMIZE_BASE
+	{
+	/* Must come after the Spectre-v2 entry */
+		.desc = "Spectre-v3a",
+		.capability = ARM64_SPECTRE_V3A,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_spectre_v3a,
+		.cpu_enable = spectre_v3a_enable_mitigation,
+	},
+#endif
+	{
+		.desc = "Spectre-v4",
+		.capability = ARM64_SPECTRE_V4,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_spectre_v4,
+		.cpu_enable = spectre_v4_enable_mitigation,
+	},
+	{
+		.desc = "Spectre-BHB",
+		.capability = ARM64_SPECTRE_BHB,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = is_spectre_bhb_affected,
+		.cpu_enable = spectre_bhb_enable_mitigation,
+	},
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+	{
+		.desc = "ARM erratum 1418040",
+		.capability = ARM64_WORKAROUND_1418040,
+		ERRATA_MIDR_RANGE_LIST(erratum_1418040_list),
+		/*
+		 * We need to allow affected CPUs to come in late, but
+		 * also need the non-affected CPUs to be able to come
+		 * in at any point in time. Wonderful.
+		 */
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT
+	{
+		.desc = "ARM errata 1165522, 1319367, or 1530923",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_AT,
+		ERRATA_MIDR_RANGE_LIST(erratum_speculative_at_list),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+	{
+		.desc = "ARM erratum 1463225",
+		.capability = ARM64_WORKAROUND_1463225,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_cortex_a76_erratum_1463225,
+		.midr_range_list = erratum_1463225,
+	},
+#endif
+#ifdef CONFIG_CAVIUM_TX2_ERRATUM_219
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (KVM guest sysreg trapping)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_TVM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+		.matches = needs_tx2_tvm_workaround,
+	},
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (PRFM removal)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1542419
+	{
+		/* we depend on the firmware portion for correctness */
+		.desc = "ARM erratum 1542419 (kernel portion)",
+		.capability = ARM64_WORKAROUND_1542419,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = has_neoverse_n1_erratum_1542419,
+		.cpu_enable = cpu_enable_trap_ctr_access,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1508412
+	{
+		/* we depend on the firmware portion for correctness */
+		.desc = "ARM erratum 1508412 (kernel portion)",
+		.capability = ARM64_WORKAROUND_1508412,
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A77,
+				  0, 0,
+				  1, 0),
+	},
+#endif
+#ifdef CONFIG_NVIDIA_CARMEL_CNP_ERRATUM
+	{
+		/* NVIDIA Carmel */
+		.desc = "NVIDIA Carmel CNP erratum",
+		.capability = ARM64_WORKAROUND_NVIDIA_CARMEL_CNP,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL),
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+	{
+		/*
+		 * The erratum work around is handled within the TRBE
+		 * driver and can be applied per-cpu. So, we can allow
+		 * a late CPU to come online with this erratum.
+		 */
+		.desc = "ARM erratum 2119858 or 2139208",
+		.capability = ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		CAP_MIDR_RANGE_LIST(trbe_overwrite_fill_mode_cpus),
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE
+	{
+		.desc = "ARM erratum 2067961 or 2054223",
+		.capability = ARM64_WORKAROUND_TSB_FLUSH_FAILURE,
+		ERRATA_MIDR_RANGE_LIST(tsb_flush_fail_cpus),
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+	{
+		.desc = "ARM erratum 2253138 or 2224489",
+		.capability = ARM64_WORKAROUND_TRBE_WRITE_OUT_OF_RANGE,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2645198
+	{
+		.desc = "ARM erratum 2645198",
+		.capability = ARM64_WORKAROUND_2645198,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_CORTEX_A715)
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2077057
+	{
+		.desc = "ARM erratum 2077057",
+		.capability = ARM64_WORKAROUND_2077057,
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2064142
+	{
+		.desc = "ARM erratum 2064142",
+		.capability = ARM64_WORKAROUND_2064142,
+
+		/* Cortex-A510 r0p0 - r0p2 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2457168
+	{
+		.desc = "ARM erratum 2457168",
+		.capability = ARM64_WORKAROUND_2457168,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+
+		/* Cortex-A510 r0p0-r1p1 */
+		CAP_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1)
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2038923
+	{
+		.desc = "ARM erratum 2038923",
+		.capability = ARM64_WORKAROUND_2038923,
+
+		/* Cortex-A510 r0p0 - r0p2 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2)
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1902691
+	{
+		.desc = "ARM erratum 1902691",
+		.capability = ARM64_WORKAROUND_1902691,
+
+		/* Cortex-A510 r0p0 - r0p1 */
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 1)
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+	{
+		.desc = "ARM erratum 1742098",
+		.capability = ARM64_WORKAROUND_1742098,
+		CAP_MIDR_RANGE_LIST(broken_aarch32_aes),
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+	},
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2658417
+	{
+		.desc = "ARM erratum 2658417",
+		.capability = ARM64_WORKAROUND_2658417,
+		/* Cortex-A510 r0p0 - r1p1 */
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A510, 0, 0, 1, 1),
+		MIDR_FIXED(MIDR_CPU_VAR_REV(1,1), BIT(25)),
+		.cpu_enable = cpu_clear_bf16_from_user_emulation,
+	},
+#endif
+#ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	{
+		.desc = "ARM errata 2966298, 3117295",
+		.capability = ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD,
+		/* Cortex-A520 r0p0 - r0p1 */
+		ERRATA_MIDR_RANGE_LIST(erratum_spec_unpriv_load_list),
+	},
+#endif
+#ifdef CONFIG_AMPERE_ERRATUM_AC03_CPU_38
+	{
+		.desc = "AmpereOne erratum AC03_CPU_38",
+		.capability = ARM64_WORKAROUND_AMPERE_AC03_CPU_38,
+		ERRATA_MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+	},
+#endif
+	{
+	}
+};
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
new file mode 100644
index 000000000..e133011f6
--- /dev/null
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * CPU kernel entry/exit control
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/cache.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/string.h>
+#include <asm/acpi.h>
+#include <asm/cpu_ops.h>
+#include <asm/smp_plat.h>
+
+extern const struct cpu_operations smp_spin_table_ops;
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+extern const struct cpu_operations acpi_parking_protocol_ops;
+#endif
+extern const struct cpu_operations cpu_psci_ops;
+
+static const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init;
+
+static const struct cpu_operations *const dt_supported_cpu_ops[] __initconst = {
+	&smp_spin_table_ops,
+	&cpu_psci_ops,
+	NULL,
+};
+
+static const struct cpu_operations *const acpi_supported_cpu_ops[] __initconst = {
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+	&acpi_parking_protocol_ops,
+#endif
+	&cpu_psci_ops,
+	NULL,
+};
+
+static const struct cpu_operations * __init cpu_get_ops(const char *name)
+{
+	const struct cpu_operations *const *ops;
+
+	ops = acpi_disabled ? dt_supported_cpu_ops : acpi_supported_cpu_ops;
+
+	while (*ops) {
+		if (!strcmp(name, (*ops)->name))
+			return *ops;
+
+		ops++;
+	}
+
+	return NULL;
+}
+
+static const char *__init cpu_read_enable_method(int cpu)
+{
+	const char *enable_method;
+
+	if (acpi_disabled) {
+		struct device_node *dn = of_get_cpu_node(cpu, NULL);
+
+		if (!dn) {
+			if (!cpu)
+				pr_err("Failed to find device node for boot cpu\n");
+			return NULL;
+		}
+
+		enable_method = of_get_property(dn, "enable-method", NULL);
+		if (!enable_method) {
+			/*
+			 * The boot CPU may not have an enable method (e.g.
+			 * when spin-table is used for secondaries).
+			 * Don't warn spuriously.
+			 */
+			if (cpu != 0)
+				pr_err("%pOF: missing enable-method property\n",
+					dn);
+		}
+		of_node_put(dn);
+	} else {
+		enable_method = acpi_get_enable_method(cpu);
+		if (!enable_method) {
+			/*
+			 * In ACPI systems the boot CPU does not require
+			 * checking the enable method since for some
+			 * boot protocol (ie parking protocol) it need not
+			 * be initialized. Don't warn spuriously.
+			 */
+			if (cpu != 0)
+				pr_err("Unsupported ACPI enable-method\n");
+		}
+	}
+
+	return enable_method;
+}
+/*
+ * Read a cpu's enable method and record it in cpu_ops.
+ */
+int __init init_cpu_ops(int cpu)
+{
+	const char *enable_method = cpu_read_enable_method(cpu);
+
+	if (!enable_method)
+		return -ENODEV;
+
+	cpu_ops[cpu] = cpu_get_ops(enable_method);
+	if (!cpu_ops[cpu]) {
+		pr_warn("Unsupported enable-method: %s\n", enable_method);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+const struct cpu_operations *get_cpu_ops(int cpu)
+{
+	return cpu_ops[cpu];
+}
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
new file mode 100644
index 000000000..444a73c2e
--- /dev/null
+++ b/arch/arm64/kernel/cpufeature.c
@@ -0,0 +1,3542 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Contains CPU feature definitions
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * A note for the weary kernel hacker: the code here is confusing and hard to
+ * follow! That's partly because it's solving a nasty problem, but also because
+ * there's a little bit of over-abstraction that tends to obscure what's going
+ * on behind a maze of helper functions and macros.
+ *
+ * The basic problem is that hardware folks have started gluing together CPUs
+ * with distinct architectural features; in some cases even creating SoCs where
+ * user-visible instructions are available only on a subset of the available
+ * cores. We try to address this by snapshotting the feature registers of the
+ * boot CPU and comparing these with the feature registers of each secondary
+ * CPU when bringing them up. If there is a mismatch, then we update the
+ * snapshot state to indicate the lowest-common denominator of the feature,
+ * known as the "safe" value. This snapshot state can be queried to view the
+ * "sanitised" value of a feature register.
+ *
+ * The sanitised register values are used to decide which capabilities we
+ * have in the system. These may be in the form of traditional "hwcaps"
+ * advertised to userspace or internal "cpucaps" which are used to configure
+ * things like alternative patching and static keys. While a feature mismatch
+ * may result in a TAINT_CPU_OUT_OF_SPEC kernel taint, a capability mismatch
+ * may prevent a CPU from being onlined at all.
+ *
+ * Some implementation details worth remembering:
+ *
+ * - Mismatched features are *always* sanitised to a "safe" value, which
+ *   usually indicates that the feature is not supported.
+ *
+ * - A mismatched feature marked with FTR_STRICT will cause a "SANITY CHECK"
+ *   warning when onlining an offending CPU and the kernel will be tainted
+ *   with TAINT_CPU_OUT_OF_SPEC.
+ *
+ * - Features marked as FTR_VISIBLE have their sanitised value visible to
+ *   userspace. FTR_VISIBLE features in registers that are only visible
+ *   to EL0 by trapping *must* have a corresponding HWCAP so that late
+ *   onlining of CPUs cannot lead to features disappearing at runtime.
+ *
+ * - A "feature" is typically a 4-bit register field. A "capability" is the
+ *   high-level description derived from the sanitised field value.
+ *
+ * - Read the Arm ARM (DDI 0487F.a) section D13.1.3 ("Principles of the ID
+ *   scheme for fields in ID registers") to understand when feature fields
+ *   may be signed or unsigned (FTR_SIGNED and FTR_UNSIGNED accordingly).
+ *
+ * - KVM exposes its own view of the feature registers to guest operating
+ *   systems regardless of FTR_VISIBLE. This is typically driven from the
+ *   sanitised register values to allow virtual CPUs to be migrated between
+ *   arbitrary physical CPUs, but some features not present on the host are
+ *   also advertised and emulated. Look at sys_reg_descs[] for the gory
+ *   details.
+ *
+ * - If the arm64_ftr_bits[] for a register has a missing field, then this
+ *   field is treated as STRICT RES0, including for read_sanitised_ftr_reg().
+ *   This is stronger than FTR_HIDDEN and can be used to hide features from
+ *   KVM guests.
+ */
+
+#define pr_fmt(fmt) "CPU features: " fmt
+
+#include <linux/bsearch.h>
+#include <linux/cpumask.h>
+#include <linux/crash_dump.h>
+#include <linux/kstrtox.h>
+#include <linux/sort.h>
+#include <linux/stop_machine.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/minmax.h>
+#include <linux/mm.h>
+#include <linux/cpu.h>
+#include <linux/kasan.h>
+#include <linux/percpu.h>
+
+#include <asm/cpu.h>
+#include <asm/cpufeature.h>
+#include <asm/cpu_ops.h>
+#include <asm/fpsimd.h>
+#include <asm/hwcap.h>
+#include <asm/insn.h>
+#include <asm/kvm_host.h>
+#include <asm/mmu_context.h>
+#include <asm/mte.h>
+#include <asm/processor.h>
+#include <asm/smp.h>
+#include <asm/sysreg.h>
+#include <asm/traps.h>
+#include <asm/vectors.h>
+#include <asm/virt.h>
+
+/* Kernel representation of AT_HWCAP and AT_HWCAP2 */
+static DECLARE_BITMAP(elf_hwcap, MAX_CPU_FEATURES) __read_mostly;
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_ELF_HWCAP_DEFAULT	\
+				(COMPAT_HWCAP_HALF|COMPAT_HWCAP_THUMB|\
+				 COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
+				 COMPAT_HWCAP_TLS|COMPAT_HWCAP_IDIV|\
+				 COMPAT_HWCAP_LPAE)
+unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
+unsigned int compat_elf_hwcap2 __read_mostly;
+#endif
+
+DECLARE_BITMAP(system_cpucaps, ARM64_NCAPS);
+EXPORT_SYMBOL(system_cpucaps);
+static struct arm64_cpu_capabilities const __ro_after_init *cpucap_ptrs[ARM64_NCAPS];
+
+DECLARE_BITMAP(boot_cpucaps, ARM64_NCAPS);
+
+bool arm64_use_ng_mappings = false;
+EXPORT_SYMBOL(arm64_use_ng_mappings);
+
+DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors;
+
+/*
+ * Permit PER_LINUX32 and execve() of 32-bit binaries even if not all CPUs
+ * support it?
+ */
+static bool __read_mostly allow_mismatched_32bit_el0;
+
+/*
+ * Static branch enabled only if allow_mismatched_32bit_el0 is set and we have
+ * seen at least one CPU capable of 32-bit EL0.
+ */
+DEFINE_STATIC_KEY_FALSE(arm64_mismatched_32bit_el0);
+
+/*
+ * Mask of CPUs supporting 32-bit EL0.
+ * Only valid if arm64_mismatched_32bit_el0 is enabled.
+ */
+static cpumask_var_t cpu_32bit_el0_mask __cpumask_var_read_mostly;
+
+void dump_cpu_features(void)
+{
+	/* file-wide pr_fmt adds "CPU features: " prefix */
+	pr_emerg("0x%*pb\n", ARM64_NCAPS, &system_cpucaps);
+}
+
+#define ARM64_CPUID_FIELDS(reg, field, min_value)			\
+		.sys_reg = SYS_##reg,							\
+		.field_pos = reg##_##field##_SHIFT,						\
+		.field_width = reg##_##field##_WIDTH,						\
+		.sign = reg##_##field##_SIGNED,							\
+		.min_field_value = reg##_##field##_##min_value,
+
+#define __ARM64_FTR_BITS(SIGNED, VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+	{						\
+		.sign = SIGNED,				\
+		.visible = VISIBLE,			\
+		.strict = STRICT,			\
+		.type = TYPE,				\
+		.shift = SHIFT,				\
+		.width = WIDTH,				\
+		.safe_val = SAFE_VAL,			\
+	}
+
+/* Define a feature with unsigned values */
+#define ARM64_FTR_BITS(VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+	__ARM64_FTR_BITS(FTR_UNSIGNED, VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
+
+/* Define a feature with a signed value */
+#define S_ARM64_FTR_BITS(VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+	__ARM64_FTR_BITS(FTR_SIGNED, VISIBLE, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
+
+#define ARM64_FTR_END					\
+	{						\
+		.width = 0,				\
+	}
+
+static void cpu_enable_cnp(struct arm64_cpu_capabilities const *cap);
+
+static bool __system_matches_cap(unsigned int n);
+
+/*
+ * NOTE: Any changes to the visibility of features should be kept in
+ * sync with the documentation of the CPU feature register ABI.
+ */
+static const struct arm64_ftr_bits ftr_id_aa64isar0[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_RNDR_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_TLB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_TS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_FHM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_DP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_SM4_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_SM3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_SHA3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_RDM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_ATOMIC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_CRC32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_SHA2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_SHA1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR0_EL1_AES_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_I8MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_DGH_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_BF16_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_SPECRES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_SB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_FRINTTS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_GPI_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_GPA_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_LRCPC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_FCMA_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_JSCVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_EL1_API_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_EXACT, ID_AA64ISAR1_EL1_APA_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_EL1_DPB_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_CSSC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_RPRFM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_CLRBHB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_BC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_MOPS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_EXACT, ID_AA64ISAR2_EL1_APA3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_GPA3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_RPRES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_EL1_WFxT_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_CSV3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_CSV2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_DIT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_AMU_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_MPAM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SEL2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+				   FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SVE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_RAS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_GIC_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_AdvSIMD_SHIFT, 4, ID_AA64PFR0_EL1_AdvSIMD_NI),
+	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_FP_SHIFT, 4, ID_AA64PFR0_EL1_FP_NI),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL1_SHIFT, 4, ID_AA64PFR0_EL1_ELx_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_EL0_SHIFT, 4, ID_AA64PFR0_EL1_ELx_64BIT_ONLY),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SME_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MPAM_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_RAS_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_MTE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_MTE_SHIFT, 4, ID_AA64PFR1_EL1_MTE_NI),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_SSBS_SHIFT, 4, ID_AA64PFR1_EL1_SSBS_NI),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_BTI),
+				    FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR1_EL1_BT_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_F64MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_F32MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_I8MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SM4_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SHA3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BF16_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_BitPerm_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_AES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_EL1_SVEver_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64smfr0[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_FA64_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_SMEver_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I16I64_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F64F64_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I16I32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_B16B16_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F16F16_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_I8I32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F16F32_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_B16F32_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_BI32I32_SHIFT, 1, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SME),
+		       FTR_STRICT, FTR_EXACT, ID_AA64SMFR0_EL1_F32F32_SHIFT, 1, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_ECV_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_FGT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_EXS_SHIFT, 4, 0),
+	/*
+	 * Page size not being supported at Stage-2 is not fatal. You
+	 * just give up KVM if PAGE_SIZE isn't supported there. Go fix
+	 * your favourite nesting hypervisor.
+	 *
+	 * There is a small corner case where the hypervisor explicitly
+	 * advertises a given granule size at Stage-2 (value 2) on some
+	 * vCPUs, and uses the fallback to Stage-1 (value 0) for other
+	 * vCPUs. Although this is not forbidden by the architecture, it
+	 * indicates that the hypervisor is being silly (or buggy).
+	 *
+	 * We make no effort to cope with this and pretend that if these
+	 * fields are inconsistent across vCPUs, then it isn't worth
+	 * trying to bring KVM up.
+	 */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_EL1_TGRAN4_2_SHIFT, 4, 1),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_EL1_TGRAN64_2_SHIFT, 4, 1),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64MMFR0_EL1_TGRAN16_2_SHIFT, 4, 1),
+	/*
+	 * We already refuse to boot CPUs that don't support our configured
+	 * page size, so we can only detect mismatches for a page size other
+	 * than the one we're currently using. Unfortunately, SoCs like this
+	 * exist in the wild so, even though we don't like it, we'll have to go
+	 * along with it and treat them as non-strict.
+	 */
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_TGRAN4_SHIFT, 4, ID_AA64MMFR0_EL1_TGRAN4_NI),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_TGRAN64_SHIFT, 4, ID_AA64MMFR0_EL1_TGRAN64_NI),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_TGRAN16_SHIFT, 4, ID_AA64MMFR0_EL1_TGRAN16_NI),
+
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_BIGENDEL0_SHIFT, 4, 0),
+	/* Linux shouldn't care about secure memory */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_SNSMEM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_BIGEND_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_ASIDBITS_SHIFT, 4, 0),
+	/*
+	 * Differing PARange is fine as long as all peripherals and memory are mapped
+	 * within the minimum PARange of all CPUs
+	 */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EL1_PARANGE_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_TIDCP1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_AFP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_HCX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_ETS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_TWED_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_XNX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64MMFR1_EL1_SpecSEI_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_PAN_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_LO_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_HPDS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_VH_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_VMIDBits_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_EL1_HAFDBS_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_E0PD_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_EVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_BBM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_TTL_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_FWB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_IDS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_AT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_ST_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_NV_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_CCIDX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_VARange_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_IESB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_LSM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_UAO_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EL1_CnP_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64mmfr3[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR3_EL1_S1PIE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR3_EL1_TCRX_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_ctr[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_DIC_SHIFT, 1, 1),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_IDC_SHIFT, 1, 1),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_EL0_CWG_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_EL0_ERG_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_DminLine_SHIFT, 4, 1),
+	/*
+	 * Linux can handle differing I-cache policies. Userspace JITs will
+	 * make use of *minLine.
+	 * If we have differing I-cache policies, report it as the weakest - VIPT.
+	 */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_EXACT, CTR_EL0_L1Ip_SHIFT, 2, CTR_EL0_L1Ip_VIPT),	/* L1Ip */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_EL0_IminLine_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static struct arm64_ftr_override __ro_after_init no_override = { };
+
+struct arm64_ftr_reg arm64_ftr_reg_ctrel0 = {
+	.name		= "SYS_CTR_EL0",
+	.ftr_bits	= ftr_ctr,
+	.override	= &no_override,
+};
+
+static const struct arm64_ftr_bits ftr_id_mmfr0[] = {
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_InnerShr_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_FCSE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_AuxReg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_TCM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_ShareLvl_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_OuterShr_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_PMSA_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_EL1_VMSA_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_DoubleLock_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_PMSVer_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_CTX_CMPs_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_WRPs_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_EL1_BRPs_SHIFT, 4, 0),
+	/*
+	 * We can instantiate multiple PMU instances with different levels
+	 * of support.
+	 */
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_AA64DFR0_EL1_PMUVer_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_EXACT, ID_AA64DFR0_EL1_DebugVer_SHIFT, 4, 0x6),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_mvfr0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPRound_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPShVec_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPSqrt_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPDivide_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPTrap_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPDP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_FPSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR0_EL1_SIMDReg_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_mvfr1[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDFMAC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDHP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDSP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDInt_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_SIMDLS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPDNaN_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR1_EL1_FPFtZ_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_mvfr2[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_EL1_FPMisc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_EL1_SIMDMisc_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_dczid[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, DCZID_EL0_DZP_SHIFT, 1, 1),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, DCZID_EL0_BS_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_gmid[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, GMID_EL1_BS_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_isar0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Divide_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Debug_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Coproc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_CmpBranch_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_BitField_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_BitCount_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR0_EL1_Swap_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_isar5[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_RDM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_CRC32_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_SHA2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_SHA1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_AES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR5_EL1_SEVL_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_mmfr4[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_EVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_CCIDX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_LSM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_HPDS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_CnP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_XNX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_EL1_AC2_SHIFT, 4, 0),
+
+	/*
+	 * SpecSEI = 1 indicates that the PE might generate an SError on an
+	 * external abort on speculative read. It is safe to assume that an
+	 * SError might be generated than it will not be. Hence it has been
+	 * classified as FTR_HIGHER_SAFE.
+	 */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_MMFR4_EL1_SpecSEI_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_isar4[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_SWP_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_PSR_M_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_SynchPrim_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_Barrier_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_SMC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_Writeback_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_WithShifts_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR4_EL1_Unpriv_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_mmfr5[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR5_EL1_ETS_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_isar6[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_I8MM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_BF16_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SPECRES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_SB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_FHM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_DP_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_ISAR6_EL1_JSCVT_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_pfr0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_DIT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_CSV2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_EL1_State0_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_pfr1[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_GIC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Virt_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Sec_frac_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_GenTimer_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Virtualization_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_MProgMod_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_Security_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR1_EL1_ProgMod_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_pfr2[] = {
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_SSBS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR2_EL1_CSV3_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_dfr0[] = {
+	/* [31:28] TraceFilt */
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_EXACT, ID_DFR0_EL1_PerfMon_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_MProfDbg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_MMapTrc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_CopTrc_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_MMapDbg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_CopSDbg_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_EL1_CopDbg_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_id_dfr1[] = {
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR1_EL1_MTPMU_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_zcr[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
+		ZCR_ELx_LEN_SHIFT, ZCR_ELx_LEN_WIDTH, 0),	/* LEN */
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_smcr[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE,
+		SMCR_ELx_LEN_SHIFT, SMCR_ELx_LEN_WIDTH, 0),	/* LEN */
+	ARM64_FTR_END,
+};
+
+/*
+ * Common ftr bits for a 32bit register with all hidden, strict
+ * attributes, with 4bit feature fields and a default safe value of
+ * 0. Covers the following 32bit registers:
+ * id_isar[1-3], id_mmfr[1-3]
+ */
+static const struct arm64_ftr_bits ftr_generic_32bits[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),
+	ARM64_FTR_END,
+};
+
+/* Table for a single 32bit feature value */
+static const struct arm64_ftr_bits ftr_single32[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_EXACT, 0, 32, 0),
+	ARM64_FTR_END,
+};
+
+static const struct arm64_ftr_bits ftr_raz[] = {
+	ARM64_FTR_END,
+};
+
+#define __ARM64_FTR_REG_OVERRIDE(id_str, id, table, ovr) {	\
+		.sys_id = id,					\
+		.reg = 	&(struct arm64_ftr_reg){		\
+			.name = id_str,				\
+			.override = (ovr),			\
+			.ftr_bits = &((table)[0]),		\
+	}}
+
+#define ARM64_FTR_REG_OVERRIDE(id, table, ovr)	\
+	__ARM64_FTR_REG_OVERRIDE(#id, id, table, ovr)
+
+#define ARM64_FTR_REG(id, table)		\
+	__ARM64_FTR_REG_OVERRIDE(#id, id, table, &no_override)
+
+struct arm64_ftr_override __ro_after_init id_aa64mmfr1_override;
+struct arm64_ftr_override __ro_after_init id_aa64pfr0_override;
+struct arm64_ftr_override __ro_after_init id_aa64pfr1_override;
+struct arm64_ftr_override __ro_after_init id_aa64zfr0_override;
+struct arm64_ftr_override __ro_after_init id_aa64smfr0_override;
+struct arm64_ftr_override __ro_after_init id_aa64isar1_override;
+struct arm64_ftr_override __ro_after_init id_aa64isar2_override;
+
+struct arm64_ftr_override arm64_sw_feature_override;
+
+static const struct __ftr_reg_entry {
+	u32			sys_id;
+	struct arm64_ftr_reg 	*reg;
+} arm64_ftr_regs[] = {
+
+	/* Op1 = 0, CRn = 0, CRm = 1 */
+	ARM64_FTR_REG(SYS_ID_PFR0_EL1, ftr_id_pfr0),
+	ARM64_FTR_REG(SYS_ID_PFR1_EL1, ftr_id_pfr1),
+	ARM64_FTR_REG(SYS_ID_DFR0_EL1, ftr_id_dfr0),
+	ARM64_FTR_REG(SYS_ID_MMFR0_EL1, ftr_id_mmfr0),
+	ARM64_FTR_REG(SYS_ID_MMFR1_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_MMFR2_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_MMFR3_EL1, ftr_generic_32bits),
+
+	/* Op1 = 0, CRn = 0, CRm = 2 */
+	ARM64_FTR_REG(SYS_ID_ISAR0_EL1, ftr_id_isar0),
+	ARM64_FTR_REG(SYS_ID_ISAR1_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_ISAR2_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_ISAR3_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_ISAR4_EL1, ftr_id_isar4),
+	ARM64_FTR_REG(SYS_ID_ISAR5_EL1, ftr_id_isar5),
+	ARM64_FTR_REG(SYS_ID_MMFR4_EL1, ftr_id_mmfr4),
+	ARM64_FTR_REG(SYS_ID_ISAR6_EL1, ftr_id_isar6),
+
+	/* Op1 = 0, CRn = 0, CRm = 3 */
+	ARM64_FTR_REG(SYS_MVFR0_EL1, ftr_mvfr0),
+	ARM64_FTR_REG(SYS_MVFR1_EL1, ftr_mvfr1),
+	ARM64_FTR_REG(SYS_MVFR2_EL1, ftr_mvfr2),
+	ARM64_FTR_REG(SYS_ID_PFR2_EL1, ftr_id_pfr2),
+	ARM64_FTR_REG(SYS_ID_DFR1_EL1, ftr_id_dfr1),
+	ARM64_FTR_REG(SYS_ID_MMFR5_EL1, ftr_id_mmfr5),
+
+	/* Op1 = 0, CRn = 0, CRm = 4 */
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64PFR0_EL1, ftr_id_aa64pfr0,
+			       &id_aa64pfr0_override),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64PFR1_EL1, ftr_id_aa64pfr1,
+			       &id_aa64pfr1_override),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ZFR0_EL1, ftr_id_aa64zfr0,
+			       &id_aa64zfr0_override),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64SMFR0_EL1, ftr_id_aa64smfr0,
+			       &id_aa64smfr0_override),
+
+	/* Op1 = 0, CRn = 0, CRm = 5 */
+	ARM64_FTR_REG(SYS_ID_AA64DFR0_EL1, ftr_id_aa64dfr0),
+	ARM64_FTR_REG(SYS_ID_AA64DFR1_EL1, ftr_raz),
+
+	/* Op1 = 0, CRn = 0, CRm = 6 */
+	ARM64_FTR_REG(SYS_ID_AA64ISAR0_EL1, ftr_id_aa64isar0),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ISAR1_EL1, ftr_id_aa64isar1,
+			       &id_aa64isar1_override),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ISAR2_EL1, ftr_id_aa64isar2,
+			       &id_aa64isar2_override),
+
+	/* Op1 = 0, CRn = 0, CRm = 7 */
+	ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1,
+			       &id_aa64mmfr1_override),
+	ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
+	ARM64_FTR_REG(SYS_ID_AA64MMFR3_EL1, ftr_id_aa64mmfr3),
+
+	/* Op1 = 0, CRn = 1, CRm = 2 */
+	ARM64_FTR_REG(SYS_ZCR_EL1, ftr_zcr),
+	ARM64_FTR_REG(SYS_SMCR_EL1, ftr_smcr),
+
+	/* Op1 = 1, CRn = 0, CRm = 0 */
+	ARM64_FTR_REG(SYS_GMID_EL1, ftr_gmid),
+
+	/* Op1 = 3, CRn = 0, CRm = 0 */
+	{ SYS_CTR_EL0, &arm64_ftr_reg_ctrel0 },
+	ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid),
+
+	/* Op1 = 3, CRn = 14, CRm = 0 */
+	ARM64_FTR_REG(SYS_CNTFRQ_EL0, ftr_single32),
+};
+
+static int search_cmp_ftr_reg(const void *id, const void *regp)
+{
+	return (int)(unsigned long)id - (int)((const struct __ftr_reg_entry *)regp)->sys_id;
+}
+
+/*
+ * get_arm64_ftr_reg_nowarn - Looks up a feature register entry using
+ * its sys_reg() encoding. With the array arm64_ftr_regs sorted in the
+ * ascending order of sys_id, we use binary search to find a matching
+ * entry.
+ *
+ * returns - Upon success,  matching ftr_reg entry for id.
+ *         - NULL on failure. It is upto the caller to decide
+ *	     the impact of a failure.
+ */
+static struct arm64_ftr_reg *get_arm64_ftr_reg_nowarn(u32 sys_id)
+{
+	const struct __ftr_reg_entry *ret;
+
+	ret = bsearch((const void *)(unsigned long)sys_id,
+			arm64_ftr_regs,
+			ARRAY_SIZE(arm64_ftr_regs),
+			sizeof(arm64_ftr_regs[0]),
+			search_cmp_ftr_reg);
+	if (ret)
+		return ret->reg;
+	return NULL;
+}
+
+/*
+ * get_arm64_ftr_reg - Looks up a feature register entry using
+ * its sys_reg() encoding. This calls get_arm64_ftr_reg_nowarn().
+ *
+ * returns - Upon success,  matching ftr_reg entry for id.
+ *         - NULL on failure but with an WARN_ON().
+ */
+struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id)
+{
+	struct arm64_ftr_reg *reg;
+
+	reg = get_arm64_ftr_reg_nowarn(sys_id);
+
+	/*
+	 * Requesting a non-existent register search is an error. Warn
+	 * and let the caller handle it.
+	 */
+	WARN_ON(!reg);
+	return reg;
+}
+
+static u64 arm64_ftr_set_value(const struct arm64_ftr_bits *ftrp, s64 reg,
+			       s64 ftr_val)
+{
+	u64 mask = arm64_ftr_mask(ftrp);
+
+	reg &= ~mask;
+	reg |= (ftr_val << ftrp->shift) & mask;
+	return reg;
+}
+
+s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new,
+				s64 cur)
+{
+	s64 ret = 0;
+
+	switch (ftrp->type) {
+	case FTR_EXACT:
+		ret = ftrp->safe_val;
+		break;
+	case FTR_LOWER_SAFE:
+		ret = min(new, cur);
+		break;
+	case FTR_HIGHER_OR_ZERO_SAFE:
+		if (!cur || !new)
+			break;
+		fallthrough;
+	case FTR_HIGHER_SAFE:
+		ret = max(new, cur);
+		break;
+	default:
+		BUG();
+	}
+
+	return ret;
+}
+
+static void __init sort_ftr_regs(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(arm64_ftr_regs); i++) {
+		const struct arm64_ftr_reg *ftr_reg = arm64_ftr_regs[i].reg;
+		const struct arm64_ftr_bits *ftr_bits = ftr_reg->ftr_bits;
+		unsigned int j = 0;
+
+		/*
+		 * Features here must be sorted in descending order with respect
+		 * to their shift values and should not overlap with each other.
+		 */
+		for (; ftr_bits->width != 0; ftr_bits++, j++) {
+			unsigned int width = ftr_reg->ftr_bits[j].width;
+			unsigned int shift = ftr_reg->ftr_bits[j].shift;
+			unsigned int prev_shift;
+
+			WARN((shift  + width) > 64,
+				"%s has invalid feature at shift %d\n",
+				ftr_reg->name, shift);
+
+			/*
+			 * Skip the first feature. There is nothing to
+			 * compare against for now.
+			 */
+			if (j == 0)
+				continue;
+
+			prev_shift = ftr_reg->ftr_bits[j - 1].shift;
+			WARN((shift + width) > prev_shift,
+				"%s has feature overlap at shift %d\n",
+				ftr_reg->name, shift);
+		}
+
+		/*
+		 * Skip the first register. There is nothing to
+		 * compare against for now.
+		 */
+		if (i == 0)
+			continue;
+		/*
+		 * Registers here must be sorted in ascending order with respect
+		 * to sys_id for subsequent binary search in get_arm64_ftr_reg()
+		 * to work correctly.
+		 */
+		BUG_ON(arm64_ftr_regs[i].sys_id <= arm64_ftr_regs[i - 1].sys_id);
+	}
+}
+
+/*
+ * Initialise the CPU feature register from Boot CPU values.
+ * Also initiliases the strict_mask for the register.
+ * Any bits that are not covered by an arm64_ftr_bits entry are considered
+ * RES0 for the system-wide value, and must strictly match.
+ */
+static void init_cpu_ftr_reg(u32 sys_reg, u64 new)
+{
+	u64 val = 0;
+	u64 strict_mask = ~0x0ULL;
+	u64 user_mask = 0;
+	u64 valid_mask = 0;
+
+	const struct arm64_ftr_bits *ftrp;
+	struct arm64_ftr_reg *reg = get_arm64_ftr_reg(sys_reg);
+
+	if (!reg)
+		return;
+
+	for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) {
+		u64 ftr_mask = arm64_ftr_mask(ftrp);
+		s64 ftr_new = arm64_ftr_value(ftrp, new);
+		s64 ftr_ovr = arm64_ftr_value(ftrp, reg->override->val);
+
+		if ((ftr_mask & reg->override->mask) == ftr_mask) {
+			s64 tmp = arm64_ftr_safe_value(ftrp, ftr_ovr, ftr_new);
+			char *str = NULL;
+
+			if (ftr_ovr != tmp) {
+				/* Unsafe, remove the override */
+				reg->override->mask &= ~ftr_mask;
+				reg->override->val &= ~ftr_mask;
+				tmp = ftr_ovr;
+				str = "ignoring override";
+			} else if (ftr_new != tmp) {
+				/* Override was valid */
+				ftr_new = tmp;
+				str = "forced";
+			} else if (ftr_ovr == tmp) {
+				/* Override was the safe value */
+				str = "already set";
+			}
+
+			if (str)
+				pr_warn("%s[%d:%d]: %s to %llx\n",
+					reg->name,
+					ftrp->shift + ftrp->width - 1,
+					ftrp->shift, str, tmp);
+		} else if ((ftr_mask & reg->override->val) == ftr_mask) {
+			reg->override->val &= ~ftr_mask;
+			pr_warn("%s[%d:%d]: impossible override, ignored\n",
+				reg->name,
+				ftrp->shift + ftrp->width - 1,
+				ftrp->shift);
+		}
+
+		val = arm64_ftr_set_value(ftrp, val, ftr_new);
+
+		valid_mask |= ftr_mask;
+		if (!ftrp->strict)
+			strict_mask &= ~ftr_mask;
+		if (ftrp->visible)
+			user_mask |= ftr_mask;
+		else
+			reg->user_val = arm64_ftr_set_value(ftrp,
+							    reg->user_val,
+							    ftrp->safe_val);
+	}
+
+	val &= valid_mask;
+
+	reg->sys_val = val;
+	reg->strict_mask = strict_mask;
+	reg->user_mask = user_mask;
+}
+
+extern const struct arm64_cpu_capabilities arm64_errata[];
+static const struct arm64_cpu_capabilities arm64_features[];
+
+static void __init
+init_cpucap_indirect_list_from_array(const struct arm64_cpu_capabilities *caps)
+{
+	for (; caps->matches; caps++) {
+		if (WARN(caps->capability >= ARM64_NCAPS,
+			"Invalid capability %d\n", caps->capability))
+			continue;
+		if (WARN(cpucap_ptrs[caps->capability],
+			"Duplicate entry for capability %d\n",
+			caps->capability))
+			continue;
+		cpucap_ptrs[caps->capability] = caps;
+	}
+}
+
+static void __init init_cpucap_indirect_list(void)
+{
+	init_cpucap_indirect_list_from_array(arm64_features);
+	init_cpucap_indirect_list_from_array(arm64_errata);
+}
+
+static void __init setup_boot_cpu_capabilities(void);
+
+static void init_32bit_cpu_features(struct cpuinfo_32bit *info)
+{
+	init_cpu_ftr_reg(SYS_ID_DFR0_EL1, info->reg_id_dfr0);
+	init_cpu_ftr_reg(SYS_ID_DFR1_EL1, info->reg_id_dfr1);
+	init_cpu_ftr_reg(SYS_ID_ISAR0_EL1, info->reg_id_isar0);
+	init_cpu_ftr_reg(SYS_ID_ISAR1_EL1, info->reg_id_isar1);
+	init_cpu_ftr_reg(SYS_ID_ISAR2_EL1, info->reg_id_isar2);
+	init_cpu_ftr_reg(SYS_ID_ISAR3_EL1, info->reg_id_isar3);
+	init_cpu_ftr_reg(SYS_ID_ISAR4_EL1, info->reg_id_isar4);
+	init_cpu_ftr_reg(SYS_ID_ISAR5_EL1, info->reg_id_isar5);
+	init_cpu_ftr_reg(SYS_ID_ISAR6_EL1, info->reg_id_isar6);
+	init_cpu_ftr_reg(SYS_ID_MMFR0_EL1, info->reg_id_mmfr0);
+	init_cpu_ftr_reg(SYS_ID_MMFR1_EL1, info->reg_id_mmfr1);
+	init_cpu_ftr_reg(SYS_ID_MMFR2_EL1, info->reg_id_mmfr2);
+	init_cpu_ftr_reg(SYS_ID_MMFR3_EL1, info->reg_id_mmfr3);
+	init_cpu_ftr_reg(SYS_ID_MMFR4_EL1, info->reg_id_mmfr4);
+	init_cpu_ftr_reg(SYS_ID_MMFR5_EL1, info->reg_id_mmfr5);
+	init_cpu_ftr_reg(SYS_ID_PFR0_EL1, info->reg_id_pfr0);
+	init_cpu_ftr_reg(SYS_ID_PFR1_EL1, info->reg_id_pfr1);
+	init_cpu_ftr_reg(SYS_ID_PFR2_EL1, info->reg_id_pfr2);
+	init_cpu_ftr_reg(SYS_MVFR0_EL1, info->reg_mvfr0);
+	init_cpu_ftr_reg(SYS_MVFR1_EL1, info->reg_mvfr1);
+	init_cpu_ftr_reg(SYS_MVFR2_EL1, info->reg_mvfr2);
+}
+
+void __init init_cpu_features(struct cpuinfo_arm64 *info)
+{
+	/* Before we start using the tables, make sure it is sorted */
+	sort_ftr_regs();
+
+	init_cpu_ftr_reg(SYS_CTR_EL0, info->reg_ctr);
+	init_cpu_ftr_reg(SYS_DCZID_EL0, info->reg_dczid);
+	init_cpu_ftr_reg(SYS_CNTFRQ_EL0, info->reg_cntfrq);
+	init_cpu_ftr_reg(SYS_ID_AA64DFR0_EL1, info->reg_id_aa64dfr0);
+	init_cpu_ftr_reg(SYS_ID_AA64DFR1_EL1, info->reg_id_aa64dfr1);
+	init_cpu_ftr_reg(SYS_ID_AA64ISAR0_EL1, info->reg_id_aa64isar0);
+	init_cpu_ftr_reg(SYS_ID_AA64ISAR1_EL1, info->reg_id_aa64isar1);
+	init_cpu_ftr_reg(SYS_ID_AA64ISAR2_EL1, info->reg_id_aa64isar2);
+	init_cpu_ftr_reg(SYS_ID_AA64MMFR0_EL1, info->reg_id_aa64mmfr0);
+	init_cpu_ftr_reg(SYS_ID_AA64MMFR1_EL1, info->reg_id_aa64mmfr1);
+	init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
+	init_cpu_ftr_reg(SYS_ID_AA64MMFR3_EL1, info->reg_id_aa64mmfr3);
+	init_cpu_ftr_reg(SYS_ID_AA64PFR0_EL1, info->reg_id_aa64pfr0);
+	init_cpu_ftr_reg(SYS_ID_AA64PFR1_EL1, info->reg_id_aa64pfr1);
+	init_cpu_ftr_reg(SYS_ID_AA64ZFR0_EL1, info->reg_id_aa64zfr0);
+	init_cpu_ftr_reg(SYS_ID_AA64SMFR0_EL1, info->reg_id_aa64smfr0);
+
+	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
+		init_32bit_cpu_features(&info->aarch32);
+
+	if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+	    id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+		info->reg_zcr = read_zcr_features();
+		init_cpu_ftr_reg(SYS_ZCR_EL1, info->reg_zcr);
+		vec_init_vq_map(ARM64_VEC_SVE);
+	}
+
+	if (IS_ENABLED(CONFIG_ARM64_SME) &&
+	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
+		info->reg_smcr = read_smcr_features();
+		/*
+		 * We mask out SMPS since even if the hardware
+		 * supports priorities the kernel does not at present
+		 * and we block access to them.
+		 */
+		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
+		init_cpu_ftr_reg(SYS_SMCR_EL1, info->reg_smcr);
+		vec_init_vq_map(ARM64_VEC_SME);
+	}
+
+	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
+		init_cpu_ftr_reg(SYS_GMID_EL1, info->reg_gmid);
+
+	/*
+	 * Initialize the indirect array of CPU capabilities pointers before we
+	 * handle the boot CPU below.
+	 */
+	init_cpucap_indirect_list();
+
+	/*
+	 * Detect and enable early CPU capabilities based on the boot CPU,
+	 * after we have initialised the CPU feature infrastructure.
+	 */
+	setup_boot_cpu_capabilities();
+}
+
+static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new)
+{
+	const struct arm64_ftr_bits *ftrp;
+
+	for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) {
+		s64 ftr_cur = arm64_ftr_value(ftrp, reg->sys_val);
+		s64 ftr_new = arm64_ftr_value(ftrp, new);
+
+		if (ftr_cur == ftr_new)
+			continue;
+		/* Find a safe value */
+		ftr_new = arm64_ftr_safe_value(ftrp, ftr_new, ftr_cur);
+		reg->sys_val = arm64_ftr_set_value(ftrp, reg->sys_val, ftr_new);
+	}
+
+}
+
+static int check_update_ftr_reg(u32 sys_id, int cpu, u64 val, u64 boot)
+{
+	struct arm64_ftr_reg *regp = get_arm64_ftr_reg(sys_id);
+
+	if (!regp)
+		return 0;
+
+	update_cpu_ftr_reg(regp, val);
+	if ((boot & regp->strict_mask) == (val & regp->strict_mask))
+		return 0;
+	pr_warn("SANITY CHECK: Unexpected variation in %s. Boot CPU: %#016llx, CPU%d: %#016llx\n",
+			regp->name, boot, cpu, val);
+	return 1;
+}
+
+static void relax_cpu_ftr_reg(u32 sys_id, int field)
+{
+	const struct arm64_ftr_bits *ftrp;
+	struct arm64_ftr_reg *regp = get_arm64_ftr_reg(sys_id);
+
+	if (!regp)
+		return;
+
+	for (ftrp = regp->ftr_bits; ftrp->width; ftrp++) {
+		if (ftrp->shift == field) {
+			regp->strict_mask &= ~arm64_ftr_mask(ftrp);
+			break;
+		}
+	}
+
+	/* Bogus field? */
+	WARN_ON(!ftrp->width);
+}
+
+static void lazy_init_32bit_cpu_features(struct cpuinfo_arm64 *info,
+					 struct cpuinfo_arm64 *boot)
+{
+	static bool boot_cpu_32bit_regs_overridden = false;
+
+	if (!allow_mismatched_32bit_el0 || boot_cpu_32bit_regs_overridden)
+		return;
+
+	if (id_aa64pfr0_32bit_el0(boot->reg_id_aa64pfr0))
+		return;
+
+	boot->aarch32 = info->aarch32;
+	init_32bit_cpu_features(&boot->aarch32);
+	boot_cpu_32bit_regs_overridden = true;
+}
+
+static int update_32bit_cpu_features(int cpu, struct cpuinfo_32bit *info,
+				     struct cpuinfo_32bit *boot)
+{
+	int taint = 0;
+	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	/*
+	 * If we don't have AArch32 at EL1, then relax the strictness of
+	 * EL1-dependent register fields to avoid spurious sanity check fails.
+	 */
+	if (!id_aa64pfr0_32bit_el1(pfr0)) {
+		relax_cpu_ftr_reg(SYS_ID_ISAR4_EL1, ID_ISAR4_EL1_SMC_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Virt_frac_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Sec_frac_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Virtualization_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_Security_SHIFT);
+		relax_cpu_ftr_reg(SYS_ID_PFR1_EL1, ID_PFR1_EL1_ProgMod_SHIFT);
+	}
+
+	taint |= check_update_ftr_reg(SYS_ID_DFR0_EL1, cpu,
+				      info->reg_id_dfr0, boot->reg_id_dfr0);
+	taint |= check_update_ftr_reg(SYS_ID_DFR1_EL1, cpu,
+				      info->reg_id_dfr1, boot->reg_id_dfr1);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR0_EL1, cpu,
+				      info->reg_id_isar0, boot->reg_id_isar0);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR1_EL1, cpu,
+				      info->reg_id_isar1, boot->reg_id_isar1);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR2_EL1, cpu,
+				      info->reg_id_isar2, boot->reg_id_isar2);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR3_EL1, cpu,
+				      info->reg_id_isar3, boot->reg_id_isar3);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR4_EL1, cpu,
+				      info->reg_id_isar4, boot->reg_id_isar4);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR5_EL1, cpu,
+				      info->reg_id_isar5, boot->reg_id_isar5);
+	taint |= check_update_ftr_reg(SYS_ID_ISAR6_EL1, cpu,
+				      info->reg_id_isar6, boot->reg_id_isar6);
+
+	/*
+	 * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and
+	 * ACTLR formats could differ across CPUs and therefore would have to
+	 * be trapped for virtualization anyway.
+	 */
+	taint |= check_update_ftr_reg(SYS_ID_MMFR0_EL1, cpu,
+				      info->reg_id_mmfr0, boot->reg_id_mmfr0);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR1_EL1, cpu,
+				      info->reg_id_mmfr1, boot->reg_id_mmfr1);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR2_EL1, cpu,
+				      info->reg_id_mmfr2, boot->reg_id_mmfr2);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR3_EL1, cpu,
+				      info->reg_id_mmfr3, boot->reg_id_mmfr3);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR4_EL1, cpu,
+				      info->reg_id_mmfr4, boot->reg_id_mmfr4);
+	taint |= check_update_ftr_reg(SYS_ID_MMFR5_EL1, cpu,
+				      info->reg_id_mmfr5, boot->reg_id_mmfr5);
+	taint |= check_update_ftr_reg(SYS_ID_PFR0_EL1, cpu,
+				      info->reg_id_pfr0, boot->reg_id_pfr0);
+	taint |= check_update_ftr_reg(SYS_ID_PFR1_EL1, cpu,
+				      info->reg_id_pfr1, boot->reg_id_pfr1);
+	taint |= check_update_ftr_reg(SYS_ID_PFR2_EL1, cpu,
+				      info->reg_id_pfr2, boot->reg_id_pfr2);
+	taint |= check_update_ftr_reg(SYS_MVFR0_EL1, cpu,
+				      info->reg_mvfr0, boot->reg_mvfr0);
+	taint |= check_update_ftr_reg(SYS_MVFR1_EL1, cpu,
+				      info->reg_mvfr1, boot->reg_mvfr1);
+	taint |= check_update_ftr_reg(SYS_MVFR2_EL1, cpu,
+				      info->reg_mvfr2, boot->reg_mvfr2);
+
+	return taint;
+}
+
+/*
+ * Update system wide CPU feature registers with the values from a
+ * non-boot CPU. Also performs SANITY checks to make sure that there
+ * aren't any insane variations from that of the boot CPU.
+ */
+void update_cpu_features(int cpu,
+			 struct cpuinfo_arm64 *info,
+			 struct cpuinfo_arm64 *boot)
+{
+	int taint = 0;
+
+	/*
+	 * The kernel can handle differing I-cache policies, but otherwise
+	 * caches should look identical. Userspace JITs will make use of
+	 * *minLine.
+	 */
+	taint |= check_update_ftr_reg(SYS_CTR_EL0, cpu,
+				      info->reg_ctr, boot->reg_ctr);
+
+	/*
+	 * Userspace may perform DC ZVA instructions. Mismatched block sizes
+	 * could result in too much or too little memory being zeroed if a
+	 * process is preempted and migrated between CPUs.
+	 */
+	taint |= check_update_ftr_reg(SYS_DCZID_EL0, cpu,
+				      info->reg_dczid, boot->reg_dczid);
+
+	/* If different, timekeeping will be broken (especially with KVM) */
+	taint |= check_update_ftr_reg(SYS_CNTFRQ_EL0, cpu,
+				      info->reg_cntfrq, boot->reg_cntfrq);
+
+	/*
+	 * The kernel uses self-hosted debug features and expects CPUs to
+	 * support identical debug features. We presently need CTX_CMPs, WRPs,
+	 * and BRPs to be identical.
+	 * ID_AA64DFR1 is currently RES0.
+	 */
+	taint |= check_update_ftr_reg(SYS_ID_AA64DFR0_EL1, cpu,
+				      info->reg_id_aa64dfr0, boot->reg_id_aa64dfr0);
+	taint |= check_update_ftr_reg(SYS_ID_AA64DFR1_EL1, cpu,
+				      info->reg_id_aa64dfr1, boot->reg_id_aa64dfr1);
+	/*
+	 * Even in big.LITTLE, processors should be identical instruction-set
+	 * wise.
+	 */
+	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR0_EL1, cpu,
+				      info->reg_id_aa64isar0, boot->reg_id_aa64isar0);
+	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR1_EL1, cpu,
+				      info->reg_id_aa64isar1, boot->reg_id_aa64isar1);
+	taint |= check_update_ftr_reg(SYS_ID_AA64ISAR2_EL1, cpu,
+				      info->reg_id_aa64isar2, boot->reg_id_aa64isar2);
+
+	/*
+	 * Differing PARange support is fine as long as all peripherals and
+	 * memory are mapped within the minimum PARange of all CPUs.
+	 * Linux should not care about secure memory.
+	 */
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR0_EL1, cpu,
+				      info->reg_id_aa64mmfr0, boot->reg_id_aa64mmfr0);
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR1_EL1, cpu,
+				      info->reg_id_aa64mmfr1, boot->reg_id_aa64mmfr1);
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR2_EL1, cpu,
+				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR3_EL1, cpu,
+				      info->reg_id_aa64mmfr3, boot->reg_id_aa64mmfr3);
+
+	taint |= check_update_ftr_reg(SYS_ID_AA64PFR0_EL1, cpu,
+				      info->reg_id_aa64pfr0, boot->reg_id_aa64pfr0);
+	taint |= check_update_ftr_reg(SYS_ID_AA64PFR1_EL1, cpu,
+				      info->reg_id_aa64pfr1, boot->reg_id_aa64pfr1);
+
+	taint |= check_update_ftr_reg(SYS_ID_AA64ZFR0_EL1, cpu,
+				      info->reg_id_aa64zfr0, boot->reg_id_aa64zfr0);
+
+	taint |= check_update_ftr_reg(SYS_ID_AA64SMFR0_EL1, cpu,
+				      info->reg_id_aa64smfr0, boot->reg_id_aa64smfr0);
+
+	if (IS_ENABLED(CONFIG_ARM64_SVE) &&
+	    id_aa64pfr0_sve(read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1))) {
+		info->reg_zcr = read_zcr_features();
+		taint |= check_update_ftr_reg(SYS_ZCR_EL1, cpu,
+					info->reg_zcr, boot->reg_zcr);
+
+		/* Probe vector lengths */
+		if (!system_capabilities_finalized())
+			vec_update_vq_map(ARM64_VEC_SVE);
+	}
+
+	if (IS_ENABLED(CONFIG_ARM64_SME) &&
+	    id_aa64pfr1_sme(read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1))) {
+		info->reg_smcr = read_smcr_features();
+		/*
+		 * We mask out SMPS since even if the hardware
+		 * supports priorities the kernel does not at present
+		 * and we block access to them.
+		 */
+		info->reg_smidr = read_cpuid(SMIDR_EL1) & ~SMIDR_EL1_SMPS;
+		taint |= check_update_ftr_reg(SYS_SMCR_EL1, cpu,
+					info->reg_smcr, boot->reg_smcr);
+
+		/* Probe vector lengths */
+		if (!system_capabilities_finalized())
+			vec_update_vq_map(ARM64_VEC_SME);
+	}
+
+	/*
+	 * The kernel uses the LDGM/STGM instructions and the number of tags
+	 * they read/write depends on the GMID_EL1.BS field. Check that the
+	 * value is the same on all CPUs.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_MTE) &&
+	    id_aa64pfr1_mte(info->reg_id_aa64pfr1)) {
+		taint |= check_update_ftr_reg(SYS_GMID_EL1, cpu,
+					      info->reg_gmid, boot->reg_gmid);
+	}
+
+	/*
+	 * If we don't have AArch32 at all then skip the checks entirely
+	 * as the register values may be UNKNOWN and we're not going to be
+	 * using them for anything.
+	 *
+	 * This relies on a sanitised view of the AArch64 ID registers
+	 * (e.g. SYS_ID_AA64PFR0_EL1), so we call it last.
+	 */
+	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0)) {
+		lazy_init_32bit_cpu_features(info, boot);
+		taint |= update_32bit_cpu_features(cpu, &info->aarch32,
+						   &boot->aarch32);
+	}
+
+	/*
+	 * Mismatched CPU features are a recipe for disaster. Don't even
+	 * pretend to support them.
+	 */
+	if (taint) {
+		pr_warn_once("Unsupported CPU feature variation detected.\n");
+		add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
+	}
+}
+
+u64 read_sanitised_ftr_reg(u32 id)
+{
+	struct arm64_ftr_reg *regp = get_arm64_ftr_reg(id);
+
+	if (!regp)
+		return 0;
+	return regp->sys_val;
+}
+EXPORT_SYMBOL_GPL(read_sanitised_ftr_reg);
+
+#define read_sysreg_case(r)	\
+	case r:		val = read_sysreg_s(r); break;
+
+/*
+ * __read_sysreg_by_encoding() - Used by a STARTING cpu before cpuinfo is populated.
+ * Read the system register on the current CPU
+ */
+u64 __read_sysreg_by_encoding(u32 sys_id)
+{
+	struct arm64_ftr_reg *regp;
+	u64 val;
+
+	switch (sys_id) {
+	read_sysreg_case(SYS_ID_PFR0_EL1);
+	read_sysreg_case(SYS_ID_PFR1_EL1);
+	read_sysreg_case(SYS_ID_PFR2_EL1);
+	read_sysreg_case(SYS_ID_DFR0_EL1);
+	read_sysreg_case(SYS_ID_DFR1_EL1);
+	read_sysreg_case(SYS_ID_MMFR0_EL1);
+	read_sysreg_case(SYS_ID_MMFR1_EL1);
+	read_sysreg_case(SYS_ID_MMFR2_EL1);
+	read_sysreg_case(SYS_ID_MMFR3_EL1);
+	read_sysreg_case(SYS_ID_MMFR4_EL1);
+	read_sysreg_case(SYS_ID_MMFR5_EL1);
+	read_sysreg_case(SYS_ID_ISAR0_EL1);
+	read_sysreg_case(SYS_ID_ISAR1_EL1);
+	read_sysreg_case(SYS_ID_ISAR2_EL1);
+	read_sysreg_case(SYS_ID_ISAR3_EL1);
+	read_sysreg_case(SYS_ID_ISAR4_EL1);
+	read_sysreg_case(SYS_ID_ISAR5_EL1);
+	read_sysreg_case(SYS_ID_ISAR6_EL1);
+	read_sysreg_case(SYS_MVFR0_EL1);
+	read_sysreg_case(SYS_MVFR1_EL1);
+	read_sysreg_case(SYS_MVFR2_EL1);
+
+	read_sysreg_case(SYS_ID_AA64PFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64PFR1_EL1);
+	read_sysreg_case(SYS_ID_AA64ZFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64SMFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64DFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64DFR1_EL1);
+	read_sysreg_case(SYS_ID_AA64MMFR0_EL1);
+	read_sysreg_case(SYS_ID_AA64MMFR1_EL1);
+	read_sysreg_case(SYS_ID_AA64MMFR2_EL1);
+	read_sysreg_case(SYS_ID_AA64MMFR3_EL1);
+	read_sysreg_case(SYS_ID_AA64ISAR0_EL1);
+	read_sysreg_case(SYS_ID_AA64ISAR1_EL1);
+	read_sysreg_case(SYS_ID_AA64ISAR2_EL1);
+
+	read_sysreg_case(SYS_CNTFRQ_EL0);
+	read_sysreg_case(SYS_CTR_EL0);
+	read_sysreg_case(SYS_DCZID_EL0);
+
+	default:
+		BUG();
+		return 0;
+	}
+
+	regp  = get_arm64_ftr_reg(sys_id);
+	if (regp) {
+		val &= ~regp->override->mask;
+		val |= (regp->override->val & regp->override->mask);
+	}
+
+	return val;
+}
+
+#include <linux/irqchip/arm-gic-v3.h>
+
+static bool
+has_always(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	return true;
+}
+
+static bool
+feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry)
+{
+	int val = cpuid_feature_extract_field_width(reg, entry->field_pos,
+						    entry->field_width,
+						    entry->sign);
+
+	return val >= entry->min_field_value;
+}
+
+static u64
+read_scoped_sysreg(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	WARN_ON(scope == SCOPE_LOCAL_CPU && preemptible());
+	if (scope == SCOPE_SYSTEM)
+		return read_sanitised_ftr_reg(entry->sys_reg);
+	else
+		return __read_sysreg_by_encoding(entry->sys_reg);
+}
+
+static bool
+has_user_cpuid_feature(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	int mask;
+	struct arm64_ftr_reg *regp;
+	u64 val = read_scoped_sysreg(entry, scope);
+
+	regp = get_arm64_ftr_reg(entry->sys_reg);
+	if (!regp)
+		return false;
+
+	mask = cpuid_feature_extract_unsigned_field_width(regp->user_mask,
+							  entry->field_pos,
+							  entry->field_width);
+	if (!mask)
+		return false;
+
+	return feature_matches(val, entry);
+}
+
+static bool
+has_cpuid_feature(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	u64 val = read_scoped_sysreg(entry, scope);
+	return feature_matches(val, entry);
+}
+
+const struct cpumask *system_32bit_el0_cpumask(void)
+{
+	if (!system_supports_32bit_el0())
+		return cpu_none_mask;
+
+	if (static_branch_unlikely(&arm64_mismatched_32bit_el0))
+		return cpu_32bit_el0_mask;
+
+	return cpu_possible_mask;
+}
+
+static int __init parse_32bit_el0_param(char *str)
+{
+	allow_mismatched_32bit_el0 = true;
+	return 0;
+}
+early_param("allow_mismatched_32bit_el0", parse_32bit_el0_param);
+
+static ssize_t aarch32_el0_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	const struct cpumask *mask = system_32bit_el0_cpumask();
+
+	return sysfs_emit(buf, "%*pbl\n", cpumask_pr_args(mask));
+}
+static const DEVICE_ATTR_RO(aarch32_el0);
+
+static int __init aarch32_el0_sysfs_init(void)
+{
+	struct device *dev_root;
+	int ret = 0;
+
+	if (!allow_mismatched_32bit_el0)
+		return 0;
+
+	dev_root = bus_get_dev_root(&cpu_subsys);
+	if (dev_root) {
+		ret = device_create_file(dev_root, &dev_attr_aarch32_el0);
+		put_device(dev_root);
+	}
+	return ret;
+}
+device_initcall(aarch32_el0_sysfs_init);
+
+static bool has_32bit_el0(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	if (!has_cpuid_feature(entry, scope))
+		return allow_mismatched_32bit_el0;
+
+	if (scope == SCOPE_SYSTEM)
+		pr_info("detected: 32-bit EL0 Support\n");
+
+	return true;
+}
+
+static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	bool has_sre;
+
+	if (!has_cpuid_feature(entry, scope))
+		return false;
+
+	has_sre = gic_enable_sre();
+	if (!has_sre)
+		pr_warn_once("%s present but disabled by higher exception level\n",
+			     entry->desc);
+
+	return has_sre;
+}
+
+static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry, int __unused)
+{
+	u32 midr = read_cpuid_id();
+
+	/* Cavium ThunderX pass 1.x and 2.x */
+	return midr_is_cpu_model_range(midr, MIDR_THUNDERX,
+		MIDR_CPU_VAR_REV(0, 0),
+		MIDR_CPU_VAR_REV(1, MIDR_REVISION_MASK));
+}
+
+static bool has_no_fpsimd(const struct arm64_cpu_capabilities *entry, int __unused)
+{
+	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	return cpuid_feature_extract_signed_field(pfr0,
+					ID_AA64PFR0_EL1_FP_SHIFT) < 0;
+}
+
+static bool has_cache_idc(const struct arm64_cpu_capabilities *entry,
+			  int scope)
+{
+	u64 ctr;
+
+	if (scope == SCOPE_SYSTEM)
+		ctr = arm64_ftr_reg_ctrel0.sys_val;
+	else
+		ctr = read_cpuid_effective_cachetype();
+
+	return ctr & BIT(CTR_EL0_IDC_SHIFT);
+}
+
+static void cpu_emulate_effective_ctr(const struct arm64_cpu_capabilities *__unused)
+{
+	/*
+	 * If the CPU exposes raw CTR_EL0.IDC = 0, while effectively
+	 * CTR_EL0.IDC = 1 (from CLIDR values), we need to trap accesses
+	 * to the CTR_EL0 on this CPU and emulate it with the real/safe
+	 * value.
+	 */
+	if (!(read_cpuid_cachetype() & BIT(CTR_EL0_IDC_SHIFT)))
+		sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0);
+}
+
+static bool has_cache_dic(const struct arm64_cpu_capabilities *entry,
+			  int scope)
+{
+	u64 ctr;
+
+	if (scope == SCOPE_SYSTEM)
+		ctr = arm64_ftr_reg_ctrel0.sys_val;
+	else
+		ctr = read_cpuid_cachetype();
+
+	return ctr & BIT(CTR_EL0_DIC_SHIFT);
+}
+
+static bool __maybe_unused
+has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	/*
+	 * Kdump isn't guaranteed to power-off all secondary CPUs, CNP
+	 * may share TLB entries with a CPU stuck in the crashed
+	 * kernel.
+	 */
+	if (is_kdump_kernel())
+		return false;
+
+	if (cpus_have_const_cap(ARM64_WORKAROUND_NVIDIA_CARMEL_CNP))
+		return false;
+
+	return has_cpuid_feature(entry, scope);
+}
+
+/*
+ * This check is triggered during the early boot before the cpufeature
+ * is initialised. Checking the status on the local CPU allows the boot
+ * CPU to detect the need for non-global mappings and thus avoiding a
+ * pagetable re-write after all the CPUs are booted. This check will be
+ * anyway run on individual CPUs, allowing us to get the consistent
+ * state once the SMP CPUs are up and thus make the switch to non-global
+ * mappings if required.
+ */
+bool kaslr_requires_kpti(void)
+{
+	if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
+		return false;
+
+	/*
+	 * E0PD does a similar job to KPTI so can be used instead
+	 * where available.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_E0PD)) {
+		u64 mmfr2 = read_sysreg_s(SYS_ID_AA64MMFR2_EL1);
+		if (cpuid_feature_extract_unsigned_field(mmfr2,
+						ID_AA64MMFR2_EL1_E0PD_SHIFT))
+			return false;
+	}
+
+	/*
+	 * Systems affected by Cavium erratum 24756 are incompatible
+	 * with KPTI.
+	 */
+	if (IS_ENABLED(CONFIG_CAVIUM_ERRATUM_27456)) {
+		extern const struct midr_range cavium_erratum_27456_cpus[];
+
+		if (is_midr_in_range_list(read_cpuid_id(),
+					  cavium_erratum_27456_cpus))
+			return false;
+	}
+
+	return kaslr_enabled();
+}
+
+static bool __meltdown_safe = true;
+static int __kpti_forced; /* 0: not forced, >0: forced on, <0: forced off */
+
+static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
+				int scope)
+{
+	/* List of CPUs that are not vulnerable and don't need KPTI */
+	static const struct midr_range kpti_safe_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
+		MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
+		MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
+		MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
+		MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_GOLD),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
+		{ /* sentinel */ }
+	};
+	char const *str = "kpti command line option";
+	bool meltdown_safe;
+
+	meltdown_safe = is_midr_in_range_list(read_cpuid_id(), kpti_safe_list);
+
+	/* Defer to CPU feature registers */
+	if (has_cpuid_feature(entry, scope))
+		meltdown_safe = true;
+
+	if (!meltdown_safe)
+		__meltdown_safe = false;
+
+	/*
+	 * For reasons that aren't entirely clear, enabling KPTI on Cavium
+	 * ThunderX leads to apparent I-cache corruption of kernel text, which
+	 * ends as well as you might imagine. Don't even try. We cannot rely
+	 * on the cpus_have_*cap() helpers here to detect the CPU erratum
+	 * because cpucap detection order may change. However, since we know
+	 * affected CPUs are always in a homogeneous configuration, it is
+	 * safe to rely on this_cpu_has_cap() here.
+	 */
+	if (this_cpu_has_cap(ARM64_WORKAROUND_CAVIUM_27456)) {
+		str = "ARM64_WORKAROUND_CAVIUM_27456";
+		__kpti_forced = -1;
+	}
+
+	/* Useful for KASLR robustness */
+	if (kaslr_requires_kpti()) {
+		if (!__kpti_forced) {
+			str = "KASLR";
+			__kpti_forced = 1;
+		}
+	}
+
+	if (cpu_mitigations_off() && !__kpti_forced) {
+		str = "mitigations=off";
+		__kpti_forced = -1;
+	}
+
+	if (!IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0)) {
+		pr_info_once("kernel page table isolation disabled by kernel configuration\n");
+		return false;
+	}
+
+	/* Forced? */
+	if (__kpti_forced) {
+		pr_info_once("kernel page table isolation forced %s by %s\n",
+			     __kpti_forced > 0 ? "ON" : "OFF", str);
+		return __kpti_forced > 0;
+	}
+
+	return !meltdown_safe;
+}
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+#define KPTI_NG_TEMP_VA		(-(1UL << PMD_SHIFT))
+
+extern
+void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
+			     phys_addr_t size, pgprot_t prot,
+			     phys_addr_t (*pgtable_alloc)(int), int flags);
+
+static phys_addr_t kpti_ng_temp_alloc;
+
+static phys_addr_t kpti_ng_pgd_alloc(int shift)
+{
+	kpti_ng_temp_alloc -= PAGE_SIZE;
+	return kpti_ng_temp_alloc;
+}
+
+static void
+kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
+{
+	typedef void (kpti_remap_fn)(int, int, phys_addr_t, unsigned long);
+	extern kpti_remap_fn idmap_kpti_install_ng_mappings;
+	kpti_remap_fn *remap_fn;
+
+	int cpu = smp_processor_id();
+	int levels = CONFIG_PGTABLE_LEVELS;
+	int order = order_base_2(levels);
+	u64 kpti_ng_temp_pgd_pa = 0;
+	pgd_t *kpti_ng_temp_pgd;
+	u64 alloc = 0;
+
+	if (__this_cpu_read(this_cpu_vector) == vectors) {
+		const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI);
+
+		__this_cpu_write(this_cpu_vector, v);
+	}
+
+	/*
+	 * We don't need to rewrite the page-tables if either we've done
+	 * it already or we have KASLR enabled and therefore have not
+	 * created any global mappings at all.
+	 */
+	if (arm64_use_ng_mappings)
+		return;
+
+	remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings);
+
+	if (!cpu) {
+		alloc = __get_free_pages(GFP_ATOMIC | __GFP_ZERO, order);
+		kpti_ng_temp_pgd = (pgd_t *)(alloc + (levels - 1) * PAGE_SIZE);
+		kpti_ng_temp_alloc = kpti_ng_temp_pgd_pa = __pa(kpti_ng_temp_pgd);
+
+		//
+		// Create a minimal page table hierarchy that permits us to map
+		// the swapper page tables temporarily as we traverse them.
+		//
+		// The physical pages are laid out as follows:
+		//
+		// +--------+-/-------+-/------ +-\\--------+
+		// :  PTE[] : | PMD[] : | PUD[] : || PGD[]  :
+		// +--------+-\-------+-\------ +-//--------+
+		//      ^
+		// The first page is mapped into this hierarchy at a PMD_SHIFT
+		// aligned virtual address, so that we can manipulate the PTE
+		// level entries while the mapping is active. The first entry
+		// covers the PTE[] page itself, the remaining entries are free
+		// to be used as a ad-hoc fixmap.
+		//
+		create_kpti_ng_temp_pgd(kpti_ng_temp_pgd, __pa(alloc),
+					KPTI_NG_TEMP_VA, PAGE_SIZE, PAGE_KERNEL,
+					kpti_ng_pgd_alloc, 0);
+	}
+
+	cpu_install_idmap();
+	remap_fn(cpu, num_online_cpus(), kpti_ng_temp_pgd_pa, KPTI_NG_TEMP_VA);
+	cpu_uninstall_idmap();
+
+	if (!cpu) {
+		free_pages(alloc, order);
+		arm64_use_ng_mappings = true;
+	}
+}
+#else
+static void
+kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
+{
+}
+#endif	/* CONFIG_UNMAP_KERNEL_AT_EL0 */
+
+static int __init parse_kpti(char *str)
+{
+	bool enabled;
+	int ret = kstrtobool(str, &enabled);
+
+	if (ret)
+		return ret;
+
+	__kpti_forced = enabled ? 1 : -1;
+	return 0;
+}
+early_param("kpti", parse_kpti);
+
+#ifdef CONFIG_ARM64_HW_AFDBM
+static inline void __cpu_enable_hw_dbm(void)
+{
+	u64 tcr = read_sysreg(tcr_el1) | TCR_HD;
+
+	write_sysreg(tcr, tcr_el1);
+	isb();
+	local_flush_tlb_all();
+}
+
+static bool cpu_has_broken_dbm(void)
+{
+	/* List of CPUs which have broken DBM support. */
+	static const struct midr_range cpus[] = {
+#ifdef CONFIG_ARM64_ERRATUM_1024718
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+		/* Kryo4xx Silver (rdpe => r1p0) */
+		MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_2051678
+		MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
+#endif
+		{},
+	};
+
+	return is_midr_in_range_list(read_cpuid_id(), cpus);
+}
+
+static bool cpu_can_use_dbm(const struct arm64_cpu_capabilities *cap)
+{
+	return has_cpuid_feature(cap, SCOPE_LOCAL_CPU) &&
+	       !cpu_has_broken_dbm();
+}
+
+static void cpu_enable_hw_dbm(struct arm64_cpu_capabilities const *cap)
+{
+	if (cpu_can_use_dbm(cap))
+		__cpu_enable_hw_dbm();
+}
+
+static bool has_hw_dbm(const struct arm64_cpu_capabilities *cap,
+		       int __unused)
+{
+	static bool detected = false;
+	/*
+	 * DBM is a non-conflicting feature. i.e, the kernel can safely
+	 * run a mix of CPUs with and without the feature. So, we
+	 * unconditionally enable the capability to allow any late CPU
+	 * to use the feature. We only enable the control bits on the
+	 * CPU, if it actually supports.
+	 *
+	 * We have to make sure we print the "feature" detection only
+	 * when at least one CPU actually uses it. So check if this CPU
+	 * can actually use it and print the message exactly once.
+	 *
+	 * This is safe as all CPUs (including secondary CPUs - due to the
+	 * LOCAL_CPU scope - and the hotplugged CPUs - via verification)
+	 * goes through the "matches" check exactly once. Also if a CPU
+	 * matches the criteria, it is guaranteed that the CPU will turn
+	 * the DBM on, as the capability is unconditionally enabled.
+	 */
+	if (!detected && cpu_can_use_dbm(cap)) {
+		detected = true;
+		pr_info("detected: Hardware dirty bit management\n");
+	}
+
+	return true;
+}
+
+#endif
+
+#ifdef CONFIG_ARM64_AMU_EXTN
+
+/*
+ * The "amu_cpus" cpumask only signals that the CPU implementation for the
+ * flagged CPUs supports the Activity Monitors Unit (AMU) but does not provide
+ * information regarding all the events that it supports. When a CPU bit is
+ * set in the cpumask, the user of this feature can only rely on the presence
+ * of the 4 fixed counters for that CPU. But this does not guarantee that the
+ * counters are enabled or access to these counters is enabled by code
+ * executed at higher exception levels (firmware).
+ */
+static struct cpumask amu_cpus __read_mostly;
+
+bool cpu_has_amu_feat(int cpu)
+{
+	return cpumask_test_cpu(cpu, &amu_cpus);
+}
+
+int get_cpu_with_amu_feat(void)
+{
+	return cpumask_any(&amu_cpus);
+}
+
+static void cpu_amu_enable(struct arm64_cpu_capabilities const *cap)
+{
+	if (has_cpuid_feature(cap, SCOPE_LOCAL_CPU)) {
+		pr_info("detected CPU%d: Activity Monitors Unit (AMU)\n",
+			smp_processor_id());
+		cpumask_set_cpu(smp_processor_id(), &amu_cpus);
+
+		/* 0 reference values signal broken/disabled counters */
+		if (!this_cpu_has_cap(ARM64_WORKAROUND_2457168))
+			update_freq_counters_refs();
+	}
+}
+
+static bool has_amu(const struct arm64_cpu_capabilities *cap,
+		    int __unused)
+{
+	/*
+	 * The AMU extension is a non-conflicting feature: the kernel can
+	 * safely run a mix of CPUs with and without support for the
+	 * activity monitors extension. Therefore, unconditionally enable
+	 * the capability to allow any late CPU to use the feature.
+	 *
+	 * With this feature unconditionally enabled, the cpu_enable
+	 * function will be called for all CPUs that match the criteria,
+	 * including secondary and hotplugged, marking this feature as
+	 * present on that respective CPU. The enable function will also
+	 * print a detection message.
+	 */
+
+	return true;
+}
+#else
+int get_cpu_with_amu_feat(void)
+{
+	return nr_cpu_ids;
+}
+#endif
+
+static bool runs_at_el2(const struct arm64_cpu_capabilities *entry, int __unused)
+{
+	return is_kernel_in_hyp_mode();
+}
+
+static void cpu_copy_el2regs(const struct arm64_cpu_capabilities *__unused)
+{
+	/*
+	 * Copy register values that aren't redirected by hardware.
+	 *
+	 * Before code patching, we only set tpidr_el1, all CPUs need to copy
+	 * this value to tpidr_el2 before we patch the code. Once we've done
+	 * that, freshly-onlined CPUs will set tpidr_el2, so we don't need to
+	 * do anything here.
+	 */
+	if (!alternative_is_applied(ARM64_HAS_VIRT_HOST_EXTN))
+		write_sysreg(read_sysreg(tpidr_el1), tpidr_el2);
+}
+
+static bool has_nested_virt_support(const struct arm64_cpu_capabilities *cap,
+				    int scope)
+{
+	if (kvm_get_mode() != KVM_MODE_NV)
+		return false;
+
+	if (!has_cpuid_feature(cap, scope)) {
+		pr_warn("unavailable: %s\n", cap->desc);
+		return false;
+	}
+
+	return true;
+}
+
+static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
+			  int __unused)
+{
+	u64 val;
+
+	val = read_sysreg(id_aa64mmfr1_el1);
+	if (!cpuid_feature_extract_unsigned_field(val, ID_AA64MMFR1_EL1_VH_SHIFT))
+		return false;
+
+	val = arm64_sw_feature_override.val & arm64_sw_feature_override.mask;
+	return cpuid_feature_extract_unsigned_field(val, ARM64_SW_FEATURE_OVERRIDE_HVHE);
+}
+
+#ifdef CONFIG_ARM64_PAN
+static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused)
+{
+	/*
+	 * We modify PSTATE. This won't work from irq context as the PSTATE
+	 * is discarded once we return from the exception.
+	 */
+	WARN_ON_ONCE(in_interrupt());
+
+	sysreg_clear_set(sctlr_el1, SCTLR_EL1_SPAN, 0);
+	set_pstate_pan(1);
+}
+#endif /* CONFIG_ARM64_PAN */
+
+#ifdef CONFIG_ARM64_RAS_EXTN
+static void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused)
+{
+	/* Firmware may have left a deferred SError in this register. */
+	write_sysreg_s(0, SYS_DISR_EL1);
+}
+#endif /* CONFIG_ARM64_RAS_EXTN */
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+static bool has_address_auth_cpucap(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	int boot_val, sec_val;
+
+	/* We don't expect to be called with SCOPE_SYSTEM */
+	WARN_ON(scope == SCOPE_SYSTEM);
+	/*
+	 * The ptr-auth feature levels are not intercompatible with lower
+	 * levels. Hence we must match ptr-auth feature level of the secondary
+	 * CPUs with that of the boot CPU. The level of boot cpu is fetched
+	 * from the sanitised register whereas direct register read is done for
+	 * the secondary CPUs.
+	 * The sanitised feature state is guaranteed to match that of the
+	 * boot CPU as a mismatched secondary CPU is parked before it gets
+	 * a chance to update the state, with the capability.
+	 */
+	boot_val = cpuid_feature_extract_field(read_sanitised_ftr_reg(entry->sys_reg),
+					       entry->field_pos, entry->sign);
+	if (scope & SCOPE_BOOT_CPU)
+		return boot_val >= entry->min_field_value;
+	/* Now check for the secondary CPUs with SCOPE_LOCAL_CPU scope */
+	sec_val = cpuid_feature_extract_field(__read_sysreg_by_encoding(entry->sys_reg),
+					      entry->field_pos, entry->sign);
+	return (sec_val >= entry->min_field_value) && (sec_val == boot_val);
+}
+
+static bool has_address_auth_metacap(const struct arm64_cpu_capabilities *entry,
+				     int scope)
+{
+	bool api = has_address_auth_cpucap(cpucap_ptrs[ARM64_HAS_ADDRESS_AUTH_IMP_DEF], scope);
+	bool apa = has_address_auth_cpucap(cpucap_ptrs[ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA5], scope);
+	bool apa3 = has_address_auth_cpucap(cpucap_ptrs[ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA3], scope);
+
+	return apa || apa3 || api;
+}
+
+static bool has_generic_auth(const struct arm64_cpu_capabilities *entry,
+			     int __unused)
+{
+	bool gpi = __system_matches_cap(ARM64_HAS_GENERIC_AUTH_IMP_DEF);
+	bool gpa = __system_matches_cap(ARM64_HAS_GENERIC_AUTH_ARCH_QARMA5);
+	bool gpa3 = __system_matches_cap(ARM64_HAS_GENERIC_AUTH_ARCH_QARMA3);
+
+	return gpa || gpa3 || gpi;
+}
+#endif /* CONFIG_ARM64_PTR_AUTH */
+
+#ifdef CONFIG_ARM64_E0PD
+static void cpu_enable_e0pd(struct arm64_cpu_capabilities const *cap)
+{
+	if (this_cpu_has_cap(ARM64_HAS_E0PD))
+		sysreg_clear_set(tcr_el1, 0, TCR_E0PD1);
+}
+#endif /* CONFIG_ARM64_E0PD */
+
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+static bool enable_pseudo_nmi;
+
+static int __init early_enable_pseudo_nmi(char *p)
+{
+	return kstrtobool(p, &enable_pseudo_nmi);
+}
+early_param("irqchip.gicv3_pseudo_nmi", early_enable_pseudo_nmi);
+
+static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry,
+				   int scope)
+{
+	/*
+	 * ARM64_HAS_GIC_CPUIF_SYSREGS has a lower index, and is a boot CPU
+	 * feature, so will be detected earlier.
+	 */
+	BUILD_BUG_ON(ARM64_HAS_GIC_PRIO_MASKING <= ARM64_HAS_GIC_CPUIF_SYSREGS);
+	if (!cpus_have_cap(ARM64_HAS_GIC_CPUIF_SYSREGS))
+		return false;
+
+	return enable_pseudo_nmi;
+}
+
+static bool has_gic_prio_relaxed_sync(const struct arm64_cpu_capabilities *entry,
+				      int scope)
+{
+	/*
+	 * If we're not using priority masking then we won't be poking PMR_EL1,
+	 * and there's no need to relax synchronization of writes to it, and
+	 * ICC_CTLR_EL1 might not be accessible and we must avoid reads from
+	 * that.
+	 *
+	 * ARM64_HAS_GIC_PRIO_MASKING has a lower index, and is a boot CPU
+	 * feature, so will be detected earlier.
+	 */
+	BUILD_BUG_ON(ARM64_HAS_GIC_PRIO_RELAXED_SYNC <= ARM64_HAS_GIC_PRIO_MASKING);
+	if (!cpus_have_cap(ARM64_HAS_GIC_PRIO_MASKING))
+		return false;
+
+	/*
+	 * When Priority Mask Hint Enable (PMHE) == 0b0, PMR is not used as a
+	 * hint for interrupt distribution, a DSB is not necessary when
+	 * unmasking IRQs via PMR, and we can relax the barrier to a NOP.
+	 *
+	 * Linux itself doesn't use 1:N distribution, so has no need to
+	 * set PMHE. The only reason to have it set is if EL3 requires it
+	 * (and we can't change it).
+	 */
+	return (gic_read_ctlr() & ICC_CTLR_EL1_PMHE_MASK) == 0;
+}
+#endif
+
+#ifdef CONFIG_ARM64_BTI
+static void bti_enable(const struct arm64_cpu_capabilities *__unused)
+{
+	/*
+	 * Use of X16/X17 for tail-calls and trampolines that jump to
+	 * function entry points using BR is a requirement for
+	 * marking binaries with GNU_PROPERTY_AARCH64_FEATURE_1_BTI.
+	 * So, be strict and forbid other BRs using other registers to
+	 * jump onto a PACIxSP instruction:
+	 */
+	sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_BT0 | SCTLR_EL1_BT1);
+	isb();
+}
+#endif /* CONFIG_ARM64_BTI */
+
+#ifdef CONFIG_ARM64_MTE
+static void cpu_enable_mte(struct arm64_cpu_capabilities const *cap)
+{
+	sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_ATA | SCTLR_EL1_ATA0);
+
+	mte_cpu_setup();
+
+	/*
+	 * Clear the tags in the zero page. This needs to be done via the
+	 * linear map which has the Tagged attribute.
+	 */
+	if (try_page_mte_tagging(ZERO_PAGE(0))) {
+		mte_clear_page_tags(lm_alias(empty_zero_page));
+		set_page_mte_tagged(ZERO_PAGE(0));
+	}
+
+	kasan_init_hw_tags_cpu();
+}
+#endif /* CONFIG_ARM64_MTE */
+
+static void elf_hwcap_fixup(void)
+{
+#ifdef CONFIG_ARM64_ERRATUM_1742098
+	if (cpus_have_const_cap(ARM64_WORKAROUND_1742098))
+		compat_elf_hwcap2 &= ~COMPAT_HWCAP2_AES;
+#endif /* ARM64_ERRATUM_1742098 */
+}
+
+#ifdef CONFIG_KVM
+static bool is_kvm_protected_mode(const struct arm64_cpu_capabilities *entry, int __unused)
+{
+	return kvm_get_mode() == KVM_MODE_PROTECTED;
+}
+#endif /* CONFIG_KVM */
+
+static void cpu_trap_el0_impdef(const struct arm64_cpu_capabilities *__unused)
+{
+	sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_TIDCP);
+}
+
+static void cpu_enable_dit(const struct arm64_cpu_capabilities *__unused)
+{
+	set_pstate_dit(1);
+}
+
+static void cpu_enable_mops(const struct arm64_cpu_capabilities *__unused)
+{
+	sysreg_clear_set(sctlr_el1, 0, SCTLR_EL1_MSCEn);
+}
+
+/* Internal helper functions to match cpu capability type */
+static bool
+cpucap_late_cpu_optional(const struct arm64_cpu_capabilities *cap)
+{
+	return !!(cap->type & ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU);
+}
+
+static bool
+cpucap_late_cpu_permitted(const struct arm64_cpu_capabilities *cap)
+{
+	return !!(cap->type & ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU);
+}
+
+static bool
+cpucap_panic_on_conflict(const struct arm64_cpu_capabilities *cap)
+{
+	return !!(cap->type & ARM64_CPUCAP_PANIC_ON_CONFLICT);
+}
+
+static const struct arm64_cpu_capabilities arm64_features[] = {
+	{
+		.capability = ARM64_ALWAYS_BOOT,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_always,
+	},
+	{
+		.capability = ARM64_ALWAYS_SYSTEM,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_always,
+	},
+	{
+		.desc = "GIC system register CPU interface",
+		.capability = ARM64_HAS_GIC_CPUIF_SYSREGS,
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.matches = has_useable_gicv3_cpuif,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, GIC, IMP)
+	},
+	{
+		.desc = "Enhanced Counter Virtualization",
+		.capability = ARM64_HAS_ECV,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, ECV, IMP)
+	},
+	{
+		.desc = "Enhanced Counter Virtualization (CNTPOFF)",
+		.capability = ARM64_HAS_ECV_CNTPOFF,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, ECV, CNTPOFF)
+	},
+#ifdef CONFIG_ARM64_PAN
+	{
+		.desc = "Privileged Access Never",
+		.capability = ARM64_HAS_PAN,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_enable_pan,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, PAN, IMP)
+	},
+#endif /* CONFIG_ARM64_PAN */
+#ifdef CONFIG_ARM64_EPAN
+	{
+		.desc = "Enhanced Privileged Access Never",
+		.capability = ARM64_HAS_EPAN,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, PAN, PAN3)
+	},
+#endif /* CONFIG_ARM64_EPAN */
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+	{
+		.desc = "LSE atomic instructions",
+		.capability = ARM64_HAS_LSE_ATOMICS,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, ATOMIC, IMP)
+	},
+#endif /* CONFIG_ARM64_LSE_ATOMICS */
+	{
+		.desc = "Software prefetching using PRFM",
+		.capability = ARM64_HAS_NO_HW_PREFETCH,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		.matches = has_no_hw_prefetch,
+	},
+	{
+		.desc = "Virtualization Host Extensions",
+		.capability = ARM64_HAS_VIRT_HOST_EXTN,
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.matches = runs_at_el2,
+		.cpu_enable = cpu_copy_el2regs,
+	},
+	{
+		.desc = "Nested Virtualization Support",
+		.capability = ARM64_HAS_NESTED_VIRT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_nested_virt_support,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, NV, IMP)
+	},
+	{
+		.capability = ARM64_HAS_32BIT_EL0_DO_NOT_USE,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_32bit_el0,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, EL0, AARCH32)
+	},
+#ifdef CONFIG_KVM
+	{
+		.desc = "32-bit EL1 Support",
+		.capability = ARM64_HAS_32BIT_EL1,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, EL1, AARCH32)
+	},
+	{
+		.desc = "Protected KVM",
+		.capability = ARM64_KVM_PROTECTED_MODE,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = is_kvm_protected_mode,
+	},
+	{
+		.desc = "HCRX_EL2 register",
+		.capability = ARM64_HAS_HCX,
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, HCX, IMP)
+	},
+#endif
+	{
+		.desc = "Kernel page table isolation (KPTI)",
+		.capability = ARM64_UNMAP_KERNEL_AT_EL0,
+		.type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE,
+		.cpu_enable = kpti_install_ng_mappings,
+		.matches = unmap_kernel_at_el0,
+		/*
+		 * The ID feature fields below are used to indicate that
+		 * the CPU doesn't need KPTI. See unmap_kernel_at_el0 for
+		 * more details.
+		 */
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, CSV3, IMP)
+	},
+	{
+		/* FP/SIMD is not implemented */
+		.capability = ARM64_HAS_NO_FPSIMD,
+		.type = ARM64_CPUCAP_BOOT_RESTRICTED_CPU_LOCAL_FEATURE,
+		.min_field_value = 0,
+		.matches = has_no_fpsimd,
+	},
+#ifdef CONFIG_ARM64_PMEM
+	{
+		.desc = "Data cache clean to Point of Persistence",
+		.capability = ARM64_HAS_DCPOP,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, DPB, IMP)
+	},
+	{
+		.desc = "Data cache clean to Point of Deep Persistence",
+		.capability = ARM64_HAS_DCPODP,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, DPB, DPB2)
+	},
+#endif
+#ifdef CONFIG_ARM64_SVE
+	{
+		.desc = "Scalable Vector Extension",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_SVE,
+		.cpu_enable = sve_kernel_enable,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, SVE, IMP)
+	},
+#endif /* CONFIG_ARM64_SVE */
+#ifdef CONFIG_ARM64_RAS_EXTN
+	{
+		.desc = "RAS Extension Support",
+		.capability = ARM64_HAS_RAS_EXTN,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_clear_disr,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP)
+	},
+#endif /* CONFIG_ARM64_RAS_EXTN */
+#ifdef CONFIG_ARM64_AMU_EXTN
+	{
+		/*
+		 * The feature is enabled by default if CONFIG_ARM64_AMU_EXTN=y.
+		 * Therefore, don't provide .desc as we don't want the detection
+		 * message to be shown until at least one CPU is detected to
+		 * support the feature.
+		 */
+		.capability = ARM64_HAS_AMU_EXTN,
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		.matches = has_amu,
+		.cpu_enable = cpu_amu_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, AMU, IMP)
+	},
+#endif /* CONFIG_ARM64_AMU_EXTN */
+	{
+		.desc = "Data cache clean to the PoU not required for I/D coherence",
+		.capability = ARM64_HAS_CACHE_IDC,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cache_idc,
+		.cpu_enable = cpu_emulate_effective_ctr,
+	},
+	{
+		.desc = "Instruction cache invalidation not required for I/D coherence",
+		.capability = ARM64_HAS_CACHE_DIC,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cache_dic,
+	},
+	{
+		.desc = "Stage-2 Force Write-Back",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_HAS_STAGE2_FWB,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, FWB, IMP)
+	},
+	{
+		.desc = "ARMv8.4 Translation Table Level",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_HAS_ARMv8_4_TTL,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, TTL, IMP)
+	},
+	{
+		.desc = "TLB range maintenance instructions",
+		.capability = ARM64_HAS_TLB_RANGE,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, TLB, RANGE)
+	},
+#ifdef CONFIG_ARM64_HW_AFDBM
+	{
+		/*
+		 * Since we turn this on always, we don't want the user to
+		 * think that the feature is available when it may not be.
+		 * So hide the description.
+		 *
+		 * .desc = "Hardware pagetable Dirty Bit Management",
+		 *
+		 */
+		.type = ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE,
+		.capability = ARM64_HW_DBM,
+		.matches = has_hw_dbm,
+		.cpu_enable = cpu_enable_hw_dbm,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, HAFDBS, DBM)
+	},
+#endif
+	{
+		.desc = "CRC32 instructions",
+		.capability = ARM64_HAS_CRC32,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, CRC32, IMP)
+	},
+	{
+		.desc = "Speculative Store Bypassing Safe (SSBS)",
+		.capability = ARM64_SSBS,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SSBS, IMP)
+	},
+#ifdef CONFIG_ARM64_CNP
+	{
+		.desc = "Common not Private translations",
+		.capability = ARM64_HAS_CNP,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_useable_cnp,
+		.cpu_enable = cpu_enable_cnp,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, CnP, IMP)
+	},
+#endif
+	{
+		.desc = "Speculation barrier (SB)",
+		.capability = ARM64_HAS_SB,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, SB, IMP)
+	},
+#ifdef CONFIG_ARM64_PTR_AUTH
+	{
+		.desc = "Address authentication (architected QARMA5 algorithm)",
+		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA5,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_address_auth_cpucap,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, APA, PAuth)
+	},
+	{
+		.desc = "Address authentication (architected QARMA3 algorithm)",
+		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA3,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_address_auth_cpucap,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, APA3, PAuth)
+	},
+	{
+		.desc = "Address authentication (IMP DEF algorithm)",
+		.capability = ARM64_HAS_ADDRESS_AUTH_IMP_DEF,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_address_auth_cpucap,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, API, PAuth)
+	},
+	{
+		.capability = ARM64_HAS_ADDRESS_AUTH,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_address_auth_metacap,
+	},
+	{
+		.desc = "Generic authentication (architected QARMA5 algorithm)",
+		.capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA5,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPA, IMP)
+	},
+	{
+		.desc = "Generic authentication (architected QARMA3 algorithm)",
+		.capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA3,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, GPA3, IMP)
+	},
+	{
+		.desc = "Generic authentication (IMP DEF algorithm)",
+		.capability = ARM64_HAS_GENERIC_AUTH_IMP_DEF,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, GPI, IMP)
+	},
+	{
+		.capability = ARM64_HAS_GENERIC_AUTH,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_generic_auth,
+	},
+#endif /* CONFIG_ARM64_PTR_AUTH */
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	{
+		/*
+		 * Depends on having GICv3
+		 */
+		.desc = "IRQ priority masking",
+		.capability = ARM64_HAS_GIC_PRIO_MASKING,
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.matches = can_use_gic_priorities,
+	},
+	{
+		/*
+		 * Depends on ARM64_HAS_GIC_PRIO_MASKING
+		 */
+		.capability = ARM64_HAS_GIC_PRIO_RELAXED_SYNC,
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.matches = has_gic_prio_relaxed_sync,
+	},
+#endif
+#ifdef CONFIG_ARM64_E0PD
+	{
+		.desc = "E0PD",
+		.capability = ARM64_HAS_E0PD,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.cpu_enable = cpu_enable_e0pd,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, E0PD, IMP)
+	},
+#endif
+	{
+		.desc = "Random Number Generator",
+		.capability = ARM64_HAS_RNG,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, RNDR, IMP)
+	},
+#ifdef CONFIG_ARM64_BTI
+	{
+		.desc = "Branch Target Identification",
+		.capability = ARM64_BTI,
+#ifdef CONFIG_ARM64_BTI_KERNEL
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+#else
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+#endif
+		.matches = has_cpuid_feature,
+		.cpu_enable = bti_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, BT, IMP)
+	},
+#endif
+#ifdef CONFIG_ARM64_MTE
+	{
+		.desc = "Memory Tagging Extension",
+		.capability = ARM64_MTE,
+		.type = ARM64_CPUCAP_STRICT_BOOT_CPU_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_enable_mte,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE2)
+	},
+	{
+		.desc = "Asymmetric MTE Tag Check Fault",
+		.capability = ARM64_MTE_ASYMM,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, MTE, MTE3)
+	},
+#endif /* CONFIG_ARM64_MTE */
+	{
+		.desc = "RCpc load-acquire (LDAPR)",
+		.capability = ARM64_HAS_LDAPR,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR1_EL1, LRCPC, IMP)
+	},
+	{
+		.desc = "Fine Grained Traps",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_HAS_FGT,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR0_EL1, FGT, IMP)
+	},
+#ifdef CONFIG_ARM64_SME
+	{
+		.desc = "Scalable Matrix Extension",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_SME,
+		.matches = has_cpuid_feature,
+		.cpu_enable = sme_kernel_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, IMP)
+	},
+	/* FA64 should be sorted after the base SME capability */
+	{
+		.desc = "FA64",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_SME_FA64,
+		.matches = has_cpuid_feature,
+		.cpu_enable = fa64_kernel_enable,
+		ARM64_CPUID_FIELDS(ID_AA64SMFR0_EL1, FA64, IMP)
+	},
+	{
+		.desc = "SME2",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_SME2,
+		.matches = has_cpuid_feature,
+		.cpu_enable = sme2_kernel_enable,
+		ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, SME, SME2)
+	},
+#endif /* CONFIG_ARM64_SME */
+	{
+		.desc = "WFx with timeout",
+		.capability = ARM64_HAS_WFXT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, WFxT, IMP)
+	},
+	{
+		.desc = "Trap EL0 IMPLEMENTATION DEFINED functionality",
+		.capability = ARM64_HAS_TIDCP1,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_trap_el0_impdef,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR1_EL1, TIDCP1, IMP)
+	},
+	{
+		.desc = "Data independent timing control (DIT)",
+		.capability = ARM64_HAS_DIT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_enable_dit,
+		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, DIT, IMP)
+	},
+	{
+		.desc = "Memory Copy and Memory Set instructions",
+		.capability = ARM64_HAS_MOPS,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.cpu_enable = cpu_enable_mops,
+		ARM64_CPUID_FIELDS(ID_AA64ISAR2_EL1, MOPS, IMP)
+	},
+	{
+		.capability = ARM64_HAS_TCR2,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR3_EL1, TCRX, IMP)
+	},
+	{
+		.desc = "Stage-1 Permission Indirection Extension (S1PIE)",
+		.capability = ARM64_HAS_S1PIE,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR3_EL1, S1PIE, IMP)
+	},
+	{
+		.desc = "VHE for hypervisor only",
+		.capability = ARM64_KVM_HVHE,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = hvhe_possible,
+	},
+	{
+		.desc = "Enhanced Virtualization Traps",
+		.capability = ARM64_HAS_EVT,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP)
+	},
+	{},
+};
+
+#define HWCAP_CPUID_MATCH(reg, field, min_value)			\
+		.matches = has_user_cpuid_feature,			\
+		ARM64_CPUID_FIELDS(reg, field, min_value)
+
+#define __HWCAP_CAP(name, cap_type, cap)					\
+		.desc = name,							\
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,				\
+		.hwcap_type = cap_type,						\
+		.hwcap = cap,							\
+
+#define HWCAP_CAP(reg, field, min_value, cap_type, cap)		\
+	{									\
+		__HWCAP_CAP(#cap, cap_type, cap)				\
+		HWCAP_CPUID_MATCH(reg, field, min_value) 		\
+	}
+
+#define HWCAP_MULTI_CAP(list, cap_type, cap)					\
+	{									\
+		__HWCAP_CAP(#cap, cap_type, cap)				\
+		.matches = cpucap_multi_entry_cap_matches,			\
+		.match_list = list,						\
+	}
+
+#define HWCAP_CAP_MATCH(match, cap_type, cap)					\
+	{									\
+		__HWCAP_CAP(#cap, cap_type, cap)				\
+		.matches = match,						\
+	}
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
+	{
+		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, APA, PAuth)
+	},
+	{
+		HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, APA3, PAuth)
+	},
+	{
+		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, API, PAuth)
+	},
+	{},
+};
+
+static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = {
+	{
+		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPA, IMP)
+	},
+	{
+		HWCAP_CPUID_MATCH(ID_AA64ISAR2_EL1, GPA3, IMP)
+	},
+	{
+		HWCAP_CPUID_MATCH(ID_AA64ISAR1_EL1, GPI, IMP)
+	},
+	{},
+};
+#endif
+
+static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
+	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, PMULL, CAP_HWCAP, KERNEL_HWCAP_PMULL),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, AES, AES, CAP_HWCAP, KERNEL_HWCAP_AES),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, SHA1, IMP, CAP_HWCAP, KERNEL_HWCAP_SHA1),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, SHA2, SHA256, CAP_HWCAP, KERNEL_HWCAP_SHA2),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, SHA2, SHA512, CAP_HWCAP, KERNEL_HWCAP_SHA512),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, CRC32, IMP, CAP_HWCAP, KERNEL_HWCAP_CRC32),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, ATOMIC, IMP, CAP_HWCAP, KERNEL_HWCAP_ATOMICS),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, RDM, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SHA3),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, SM3, IMP, CAP_HWCAP, KERNEL_HWCAP_SM3),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SM4),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, DP, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDDP),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, FHM, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, TS, FLAGM, CAP_HWCAP, KERNEL_HWCAP_FLAGM),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, TS, FLAGM2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2),
+	HWCAP_CAP(ID_AA64ISAR0_EL1, RNDR, IMP, CAP_HWCAP, KERNEL_HWCAP_RNG),
+	HWCAP_CAP(ID_AA64PFR0_EL1, FP, IMP, CAP_HWCAP, KERNEL_HWCAP_FP),
+	HWCAP_CAP(ID_AA64PFR0_EL1, FP, FP16, CAP_HWCAP, KERNEL_HWCAP_FPHP),
+	HWCAP_CAP(ID_AA64PFR0_EL1, AdvSIMD, IMP, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
+	HWCAP_CAP(ID_AA64PFR0_EL1, AdvSIMD, FP16, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
+	HWCAP_CAP(ID_AA64PFR0_EL1, DIT, IMP, CAP_HWCAP, KERNEL_HWCAP_DIT),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, DPB, IMP, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, DPB, DPB2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, JSCVT, IMP, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, FCMA, IMP, CAP_HWCAP, KERNEL_HWCAP_FCMA),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, IMP, CAP_HWCAP, KERNEL_HWCAP_LRCPC),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, LRCPC, LRCPC2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, FRINTTS, IMP, CAP_HWCAP, KERNEL_HWCAP_FRINT),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, SB, IMP, CAP_HWCAP, KERNEL_HWCAP_SB),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_BF16),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_EBF16),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, DGH, IMP, CAP_HWCAP, KERNEL_HWCAP_DGH),
+	HWCAP_CAP(ID_AA64ISAR1_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_I8MM),
+	HWCAP_CAP(ID_AA64MMFR2_EL1, AT, IMP, CAP_HWCAP, KERNEL_HWCAP_USCAT),
+#ifdef CONFIG_ARM64_SVE
+	HWCAP_CAP(ID_AA64PFR0_EL1, SVE, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2p1, CAP_HWCAP, KERNEL_HWCAP_SVE2P1),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, SVEver, SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, AES, PMULL128, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, BitPerm, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, BF16, EBF16, CAP_HWCAP, KERNEL_HWCAP_SVE_EBF16),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, SHA3, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, SM4, IMP, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, F32MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
+	HWCAP_CAP(ID_AA64ZFR0_EL1, F64MM, IMP, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+#endif
+	HWCAP_CAP(ID_AA64PFR1_EL1, SSBS, SSBS2, CAP_HWCAP, KERNEL_HWCAP_SSBS),
+#ifdef CONFIG_ARM64_BTI
+	HWCAP_CAP(ID_AA64PFR1_EL1, BT, IMP, CAP_HWCAP, KERNEL_HWCAP_BTI),
+#endif
+#ifdef CONFIG_ARM64_PTR_AUTH
+	HWCAP_MULTI_CAP(ptr_auth_hwcap_addr_matches, CAP_HWCAP, KERNEL_HWCAP_PACA),
+	HWCAP_MULTI_CAP(ptr_auth_hwcap_gen_matches, CAP_HWCAP, KERNEL_HWCAP_PACG),
+#endif
+#ifdef CONFIG_ARM64_MTE
+	HWCAP_CAP(ID_AA64PFR1_EL1, MTE, MTE2, CAP_HWCAP, KERNEL_HWCAP_MTE),
+	HWCAP_CAP(ID_AA64PFR1_EL1, MTE, MTE3, CAP_HWCAP, KERNEL_HWCAP_MTE3),
+#endif /* CONFIG_ARM64_MTE */
+	HWCAP_CAP(ID_AA64MMFR0_EL1, ECV, IMP, CAP_HWCAP, KERNEL_HWCAP_ECV),
+	HWCAP_CAP(ID_AA64MMFR1_EL1, AFP, IMP, CAP_HWCAP, KERNEL_HWCAP_AFP),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, CSSC, IMP, CAP_HWCAP, KERNEL_HWCAP_CSSC),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, RPRFM, IMP, CAP_HWCAP, KERNEL_HWCAP_RPRFM),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, RPRES, IMP, CAP_HWCAP, KERNEL_HWCAP_RPRES),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, WFxT, IMP, CAP_HWCAP, KERNEL_HWCAP_WFXT),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, MOPS, IMP, CAP_HWCAP, KERNEL_HWCAP_MOPS),
+	HWCAP_CAP(ID_AA64ISAR2_EL1, BC, IMP, CAP_HWCAP, KERNEL_HWCAP_HBC),
+#ifdef CONFIG_ARM64_SME
+	HWCAP_CAP(ID_AA64PFR1_EL1, SME, IMP, CAP_HWCAP, KERNEL_HWCAP_SME),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, FA64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_FA64),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2p1, CAP_HWCAP, KERNEL_HWCAP_SME2P1),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, SMEver, SME2, CAP_HWCAP, KERNEL_HWCAP_SME2),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, I16I64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I64),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, F64F64, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F64F64),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, I16I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I16I32),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, B16B16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16B16),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, F16F16, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F16),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, I8I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_I8I32),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, F16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F16F32),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, B16F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_B16F32),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, BI32I32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_BI32I32),
+	HWCAP_CAP(ID_AA64SMFR0_EL1, F32F32, IMP, CAP_HWCAP, KERNEL_HWCAP_SME_F32F32),
+#endif /* CONFIG_ARM64_SME */
+	{},
+};
+
+#ifdef CONFIG_COMPAT
+static bool compat_has_neon(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	/*
+	 * Check that all of MVFR1_EL1.{SIMDSP, SIMDInt, SIMDLS} are available,
+	 * in line with that of arm32 as in vfp_init(). We make sure that the
+	 * check is future proof, by making sure value is non-zero.
+	 */
+	u32 mvfr1;
+
+	WARN_ON(scope == SCOPE_LOCAL_CPU && preemptible());
+	if (scope == SCOPE_SYSTEM)
+		mvfr1 = read_sanitised_ftr_reg(SYS_MVFR1_EL1);
+	else
+		mvfr1 = read_sysreg_s(SYS_MVFR1_EL1);
+
+	return cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_EL1_SIMDSP_SHIFT) &&
+		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_EL1_SIMDInt_SHIFT) &&
+		cpuid_feature_extract_unsigned_field(mvfr1, MVFR1_EL1_SIMDLS_SHIFT);
+}
+#endif
+
+static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = {
+#ifdef CONFIG_COMPAT
+	HWCAP_CAP_MATCH(compat_has_neon, CAP_COMPAT_HWCAP, COMPAT_HWCAP_NEON),
+	HWCAP_CAP(MVFR1_EL1, SIMDFMAC, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4),
+	/* Arm v8 mandates MVFR0.FPDP == {0, 2}. So, piggy back on this for the presence of VFP support */
+	HWCAP_CAP(MVFR0_EL1, FPDP, VFPv3, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP),
+	HWCAP_CAP(MVFR0_EL1, FPDP, VFPv3, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3),
+	HWCAP_CAP(MVFR1_EL1, FPHP, FP16, CAP_COMPAT_HWCAP, COMPAT_HWCAP_FPHP),
+	HWCAP_CAP(MVFR1_EL1, SIMDHP, SIMDHP_FLOAT, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDHP),
+	HWCAP_CAP(ID_ISAR5_EL1, AES, VMULL, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
+	HWCAP_CAP(ID_ISAR5_EL1, AES, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
+	HWCAP_CAP(ID_ISAR5_EL1, SHA1, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
+	HWCAP_CAP(ID_ISAR5_EL1, SHA2, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
+	HWCAP_CAP(ID_ISAR5_EL1, CRC32, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
+	HWCAP_CAP(ID_ISAR6_EL1, DP, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDDP),
+	HWCAP_CAP(ID_ISAR6_EL1, FHM, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDFHM),
+	HWCAP_CAP(ID_ISAR6_EL1, SB, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SB),
+	HWCAP_CAP(ID_ISAR6_EL1, BF16, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_ASIMDBF16),
+	HWCAP_CAP(ID_ISAR6_EL1, I8MM, IMP, CAP_COMPAT_HWCAP, COMPAT_HWCAP_I8MM),
+	HWCAP_CAP(ID_PFR2_EL1, SSBS, IMP, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SSBS),
+#endif
+	{},
+};
+
+static void cap_set_elf_hwcap(const struct arm64_cpu_capabilities *cap)
+{
+	switch (cap->hwcap_type) {
+	case CAP_HWCAP:
+		cpu_set_feature(cap->hwcap);
+		break;
+#ifdef CONFIG_COMPAT
+	case CAP_COMPAT_HWCAP:
+		compat_elf_hwcap |= (u32)cap->hwcap;
+		break;
+	case CAP_COMPAT_HWCAP2:
+		compat_elf_hwcap2 |= (u32)cap->hwcap;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		break;
+	}
+}
+
+/* Check if we have a particular HWCAP enabled */
+static bool cpus_have_elf_hwcap(const struct arm64_cpu_capabilities *cap)
+{
+	bool rc;
+
+	switch (cap->hwcap_type) {
+	case CAP_HWCAP:
+		rc = cpu_have_feature(cap->hwcap);
+		break;
+#ifdef CONFIG_COMPAT
+	case CAP_COMPAT_HWCAP:
+		rc = (compat_elf_hwcap & (u32)cap->hwcap) != 0;
+		break;
+	case CAP_COMPAT_HWCAP2:
+		rc = (compat_elf_hwcap2 & (u32)cap->hwcap) != 0;
+		break;
+#endif
+	default:
+		WARN_ON(1);
+		rc = false;
+	}
+
+	return rc;
+}
+
+static void setup_elf_hwcaps(const struct arm64_cpu_capabilities *hwcaps)
+{
+	/* We support emulation of accesses to CPU ID feature registers */
+	cpu_set_named_feature(CPUID);
+	for (; hwcaps->matches; hwcaps++)
+		if (hwcaps->matches(hwcaps, cpucap_default_scope(hwcaps)))
+			cap_set_elf_hwcap(hwcaps);
+}
+
+static void update_cpu_capabilities(u16 scope_mask)
+{
+	int i;
+	const struct arm64_cpu_capabilities *caps;
+
+	scope_mask &= ARM64_CPUCAP_SCOPE_MASK;
+	for (i = 0; i < ARM64_NCAPS; i++) {
+		caps = cpucap_ptrs[i];
+		if (!caps || !(caps->type & scope_mask) ||
+		    cpus_have_cap(caps->capability) ||
+		    !caps->matches(caps, cpucap_default_scope(caps)))
+			continue;
+
+		if (caps->desc)
+			pr_info("detected: %s\n", caps->desc);
+
+		__set_bit(caps->capability, system_cpucaps);
+
+		if ((scope_mask & SCOPE_BOOT_CPU) && (caps->type & SCOPE_BOOT_CPU))
+			set_bit(caps->capability, boot_cpucaps);
+	}
+}
+
+/*
+ * Enable all the available capabilities on this CPU. The capabilities
+ * with BOOT_CPU scope are handled separately and hence skipped here.
+ */
+static int cpu_enable_non_boot_scope_capabilities(void *__unused)
+{
+	int i;
+	u16 non_boot_scope = SCOPE_ALL & ~SCOPE_BOOT_CPU;
+
+	for_each_available_cap(i) {
+		const struct arm64_cpu_capabilities *cap = cpucap_ptrs[i];
+
+		if (WARN_ON(!cap))
+			continue;
+
+		if (!(cap->type & non_boot_scope))
+			continue;
+
+		if (cap->cpu_enable)
+			cap->cpu_enable(cap);
+	}
+	return 0;
+}
+
+/*
+ * Run through the enabled capabilities and enable() it on all active
+ * CPUs
+ */
+static void __init enable_cpu_capabilities(u16 scope_mask)
+{
+	int i;
+	const struct arm64_cpu_capabilities *caps;
+	bool boot_scope;
+
+	scope_mask &= ARM64_CPUCAP_SCOPE_MASK;
+	boot_scope = !!(scope_mask & SCOPE_BOOT_CPU);
+
+	for (i = 0; i < ARM64_NCAPS; i++) {
+		unsigned int num;
+
+		caps = cpucap_ptrs[i];
+		if (!caps || !(caps->type & scope_mask))
+			continue;
+		num = caps->capability;
+		if (!cpus_have_cap(num))
+			continue;
+
+		if (boot_scope && caps->cpu_enable)
+			/*
+			 * Capabilities with SCOPE_BOOT_CPU scope are finalised
+			 * before any secondary CPU boots. Thus, each secondary
+			 * will enable the capability as appropriate via
+			 * check_local_cpu_capabilities(). The only exception is
+			 * the boot CPU, for which the capability must be
+			 * enabled here. This approach avoids costly
+			 * stop_machine() calls for this case.
+			 */
+			caps->cpu_enable(caps);
+	}
+
+	/*
+	 * For all non-boot scope capabilities, use stop_machine()
+	 * as it schedules the work allowing us to modify PSTATE,
+	 * instead of on_each_cpu() which uses an IPI, giving us a
+	 * PSTATE that disappears when we return.
+	 */
+	if (!boot_scope)
+		stop_machine(cpu_enable_non_boot_scope_capabilities,
+			     NULL, cpu_online_mask);
+}
+
+/*
+ * Run through the list of capabilities to check for conflicts.
+ * If the system has already detected a capability, take necessary
+ * action on this CPU.
+ */
+static void verify_local_cpu_caps(u16 scope_mask)
+{
+	int i;
+	bool cpu_has_cap, system_has_cap;
+	const struct arm64_cpu_capabilities *caps;
+
+	scope_mask &= ARM64_CPUCAP_SCOPE_MASK;
+
+	for (i = 0; i < ARM64_NCAPS; i++) {
+		caps = cpucap_ptrs[i];
+		if (!caps || !(caps->type & scope_mask))
+			continue;
+
+		cpu_has_cap = caps->matches(caps, SCOPE_LOCAL_CPU);
+		system_has_cap = cpus_have_cap(caps->capability);
+
+		if (system_has_cap) {
+			/*
+			 * Check if the new CPU misses an advertised feature,
+			 * which is not safe to miss.
+			 */
+			if (!cpu_has_cap && !cpucap_late_cpu_optional(caps))
+				break;
+			/*
+			 * We have to issue cpu_enable() irrespective of
+			 * whether the CPU has it or not, as it is enabeld
+			 * system wide. It is upto the call back to take
+			 * appropriate action on this CPU.
+			 */
+			if (caps->cpu_enable)
+				caps->cpu_enable(caps);
+		} else {
+			/*
+			 * Check if the CPU has this capability if it isn't
+			 * safe to have when the system doesn't.
+			 */
+			if (cpu_has_cap && !cpucap_late_cpu_permitted(caps))
+				break;
+		}
+	}
+
+	if (i < ARM64_NCAPS) {
+		pr_crit("CPU%d: Detected conflict for capability %d (%s), System: %d, CPU: %d\n",
+			smp_processor_id(), caps->capability,
+			caps->desc, system_has_cap, cpu_has_cap);
+
+		if (cpucap_panic_on_conflict(caps))
+			cpu_panic_kernel();
+		else
+			cpu_die_early();
+	}
+}
+
+/*
+ * Check for CPU features that are used in early boot
+ * based on the Boot CPU value.
+ */
+static void check_early_cpu_features(void)
+{
+	verify_cpu_asid_bits();
+
+	verify_local_cpu_caps(SCOPE_BOOT_CPU);
+}
+
+static void
+__verify_local_elf_hwcaps(const struct arm64_cpu_capabilities *caps)
+{
+
+	for (; caps->matches; caps++)
+		if (cpus_have_elf_hwcap(caps) && !caps->matches(caps, SCOPE_LOCAL_CPU)) {
+			pr_crit("CPU%d: missing HWCAP: %s\n",
+					smp_processor_id(), caps->desc);
+			cpu_die_early();
+		}
+}
+
+static void verify_local_elf_hwcaps(void)
+{
+	__verify_local_elf_hwcaps(arm64_elf_hwcaps);
+
+	if (id_aa64pfr0_32bit_el0(read_cpuid(ID_AA64PFR0_EL1)))
+		__verify_local_elf_hwcaps(compat_elf_hwcaps);
+}
+
+static void verify_sve_features(void)
+{
+	u64 safe_zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+	u64 zcr = read_zcr_features();
+
+	unsigned int safe_len = safe_zcr & ZCR_ELx_LEN_MASK;
+	unsigned int len = zcr & ZCR_ELx_LEN_MASK;
+
+	if (len < safe_len || vec_verify_vq_map(ARM64_VEC_SVE)) {
+		pr_crit("CPU%d: SVE: vector length support mismatch\n",
+			smp_processor_id());
+		cpu_die_early();
+	}
+
+	/* Add checks on other ZCR bits here if necessary */
+}
+
+static void verify_sme_features(void)
+{
+	u64 safe_smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1);
+	u64 smcr = read_smcr_features();
+
+	unsigned int safe_len = safe_smcr & SMCR_ELx_LEN_MASK;
+	unsigned int len = smcr & SMCR_ELx_LEN_MASK;
+
+	if (len < safe_len || vec_verify_vq_map(ARM64_VEC_SME)) {
+		pr_crit("CPU%d: SME: vector length support mismatch\n",
+			smp_processor_id());
+		cpu_die_early();
+	}
+
+	/* Add checks on other SMCR bits here if necessary */
+}
+
+static void verify_hyp_capabilities(void)
+{
+	u64 safe_mmfr1, mmfr0, mmfr1;
+	int parange, ipa_max;
+	unsigned int safe_vmid_bits, vmid_bits;
+
+	if (!IS_ENABLED(CONFIG_KVM))
+		return;
+
+	safe_mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
+	mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
+
+	/* Verify VMID bits */
+	safe_vmid_bits = get_vmid_bits(safe_mmfr1);
+	vmid_bits = get_vmid_bits(mmfr1);
+	if (vmid_bits < safe_vmid_bits) {
+		pr_crit("CPU%d: VMID width mismatch\n", smp_processor_id());
+		cpu_die_early();
+	}
+
+	/* Verify IPA range */
+	parange = cpuid_feature_extract_unsigned_field(mmfr0,
+				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
+	ipa_max = id_aa64mmfr0_parange_to_phys_shift(parange);
+	if (ipa_max < get_kvm_ipa_limit()) {
+		pr_crit("CPU%d: IPA range mismatch\n", smp_processor_id());
+		cpu_die_early();
+	}
+}
+
+/*
+ * Run through the enabled system capabilities and enable() it on this CPU.
+ * The capabilities were decided based on the available CPUs at the boot time.
+ * Any new CPU should match the system wide status of the capability. If the
+ * new CPU doesn't have a capability which the system now has enabled, we
+ * cannot do anything to fix it up and could cause unexpected failures. So
+ * we park the CPU.
+ */
+static void verify_local_cpu_capabilities(void)
+{
+	/*
+	 * The capabilities with SCOPE_BOOT_CPU are checked from
+	 * check_early_cpu_features(), as they need to be verified
+	 * on all secondary CPUs.
+	 */
+	verify_local_cpu_caps(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+	verify_local_elf_hwcaps();
+
+	if (system_supports_sve())
+		verify_sve_features();
+
+	if (system_supports_sme())
+		verify_sme_features();
+
+	if (is_hyp_mode_available())
+		verify_hyp_capabilities();
+}
+
+void check_local_cpu_capabilities(void)
+{
+	/*
+	 * All secondary CPUs should conform to the early CPU features
+	 * in use by the kernel based on boot CPU.
+	 */
+	check_early_cpu_features();
+
+	/*
+	 * If we haven't finalised the system capabilities, this CPU gets
+	 * a chance to update the errata work arounds and local features.
+	 * Otherwise, this CPU should verify that it has all the system
+	 * advertised capabilities.
+	 */
+	if (!system_capabilities_finalized())
+		update_cpu_capabilities(SCOPE_LOCAL_CPU);
+	else
+		verify_local_cpu_capabilities();
+}
+
+static void __init setup_boot_cpu_capabilities(void)
+{
+	/* Detect capabilities with either SCOPE_BOOT_CPU or SCOPE_LOCAL_CPU */
+	update_cpu_capabilities(SCOPE_BOOT_CPU | SCOPE_LOCAL_CPU);
+	/* Enable the SCOPE_BOOT_CPU capabilities alone right away */
+	enable_cpu_capabilities(SCOPE_BOOT_CPU);
+}
+
+bool this_cpu_has_cap(unsigned int n)
+{
+	if (!WARN_ON(preemptible()) && n < ARM64_NCAPS) {
+		const struct arm64_cpu_capabilities *cap = cpucap_ptrs[n];
+
+		if (cap)
+			return cap->matches(cap, SCOPE_LOCAL_CPU);
+	}
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(this_cpu_has_cap);
+
+/*
+ * This helper function is used in a narrow window when,
+ * - The system wide safe registers are set with all the SMP CPUs and,
+ * - The SYSTEM_FEATURE system_cpucaps may not have been set.
+ * In all other cases cpus_have_{const_}cap() should be used.
+ */
+static bool __maybe_unused __system_matches_cap(unsigned int n)
+{
+	if (n < ARM64_NCAPS) {
+		const struct arm64_cpu_capabilities *cap = cpucap_ptrs[n];
+
+		if (cap)
+			return cap->matches(cap, SCOPE_SYSTEM);
+	}
+	return false;
+}
+
+void cpu_set_feature(unsigned int num)
+{
+	set_bit(num, elf_hwcap);
+}
+
+bool cpu_have_feature(unsigned int num)
+{
+	return test_bit(num, elf_hwcap);
+}
+EXPORT_SYMBOL_GPL(cpu_have_feature);
+
+unsigned long cpu_get_elf_hwcap(void)
+{
+	/*
+	 * We currently only populate the first 32 bits of AT_HWCAP. Please
+	 * note that for userspace compatibility we guarantee that bits 62
+	 * and 63 will always be returned as 0.
+	 */
+	return elf_hwcap[0];
+}
+
+unsigned long cpu_get_elf_hwcap2(void)
+{
+	return elf_hwcap[1];
+}
+
+static void __init setup_system_capabilities(void)
+{
+	/*
+	 * We have finalised the system-wide safe feature
+	 * registers, finalise the capabilities that depend
+	 * on it. Also enable all the available capabilities,
+	 * that are not enabled already.
+	 */
+	update_cpu_capabilities(SCOPE_SYSTEM);
+	enable_cpu_capabilities(SCOPE_ALL & ~SCOPE_BOOT_CPU);
+}
+
+void __init setup_cpu_features(void)
+{
+	u32 cwg;
+
+	setup_system_capabilities();
+	setup_elf_hwcaps(arm64_elf_hwcaps);
+
+	if (system_supports_32bit_el0()) {
+		setup_elf_hwcaps(compat_elf_hwcaps);
+		elf_hwcap_fixup();
+	}
+
+	if (system_uses_ttbr0_pan())
+		pr_info("emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching\n");
+
+	sve_setup();
+	sme_setup();
+	minsigstksz_setup();
+
+	/*
+	 * Check for sane CTR_EL0.CWG value.
+	 */
+	cwg = cache_type_cwg();
+	if (!cwg)
+		pr_warn("No Cache Writeback Granule information, assuming %d\n",
+			ARCH_DMA_MINALIGN);
+}
+
+static int enable_mismatched_32bit_el0(unsigned int cpu)
+{
+	/*
+	 * The first 32-bit-capable CPU we detected and so can no longer
+	 * be offlined by userspace. -1 indicates we haven't yet onlined
+	 * a 32-bit-capable CPU.
+	 */
+	static int lucky_winner = -1;
+
+	struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+	bool cpu_32bit = id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0);
+
+	if (cpu_32bit) {
+		cpumask_set_cpu(cpu, cpu_32bit_el0_mask);
+		static_branch_enable_cpuslocked(&arm64_mismatched_32bit_el0);
+	}
+
+	if (cpumask_test_cpu(0, cpu_32bit_el0_mask) == cpu_32bit)
+		return 0;
+
+	if (lucky_winner >= 0)
+		return 0;
+
+	/*
+	 * We've detected a mismatch. We need to keep one of our CPUs with
+	 * 32-bit EL0 online so that is_cpu_allowed() doesn't end up rejecting
+	 * every CPU in the system for a 32-bit task.
+	 */
+	lucky_winner = cpu_32bit ? cpu : cpumask_any_and(cpu_32bit_el0_mask,
+							 cpu_active_mask);
+	get_cpu_device(lucky_winner)->offline_disabled = true;
+	setup_elf_hwcaps(compat_elf_hwcaps);
+	elf_hwcap_fixup();
+	pr_info("Asymmetric 32-bit EL0 support detected on CPU %u; CPU hot-unplug disabled on CPU %u\n",
+		cpu, lucky_winner);
+	return 0;
+}
+
+static int __init init_32bit_el0_mask(void)
+{
+	if (!allow_mismatched_32bit_el0)
+		return 0;
+
+	if (!zalloc_cpumask_var(&cpu_32bit_el0_mask, GFP_KERNEL))
+		return -ENOMEM;
+
+	return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				 "arm64/mismatched_32bit_el0:online",
+				 enable_mismatched_32bit_el0, NULL);
+}
+subsys_initcall_sync(init_32bit_el0_mask);
+
+static void __maybe_unused cpu_enable_cnp(struct arm64_cpu_capabilities const *cap)
+{
+	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
+}
+
+/*
+ * We emulate only the following system register space.
+ * Op0 = 0x3, CRn = 0x0, Op1 = 0x0, CRm = [0, 2 - 7]
+ * See Table C5-6 System instruction encodings for System register accesses,
+ * ARMv8 ARM(ARM DDI 0487A.f) for more details.
+ */
+static inline bool __attribute_const__ is_emulated(u32 id)
+{
+	return (sys_reg_Op0(id) == 0x3 &&
+		sys_reg_CRn(id) == 0x0 &&
+		sys_reg_Op1(id) == 0x0 &&
+		(sys_reg_CRm(id) == 0 ||
+		 ((sys_reg_CRm(id) >= 2) && (sys_reg_CRm(id) <= 7))));
+}
+
+/*
+ * With CRm == 0, reg should be one of :
+ * MIDR_EL1, MPIDR_EL1 or REVIDR_EL1.
+ */
+static inline int emulate_id_reg(u32 id, u64 *valp)
+{
+	switch (id) {
+	case SYS_MIDR_EL1:
+		*valp = read_cpuid_id();
+		break;
+	case SYS_MPIDR_EL1:
+		*valp = SYS_MPIDR_SAFE_VAL;
+		break;
+	case SYS_REVIDR_EL1:
+		/* IMPLEMENTATION DEFINED values are emulated with 0 */
+		*valp = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int emulate_sys_reg(u32 id, u64 *valp)
+{
+	struct arm64_ftr_reg *regp;
+
+	if (!is_emulated(id))
+		return -EINVAL;
+
+	if (sys_reg_CRm(id) == 0)
+		return emulate_id_reg(id, valp);
+
+	regp = get_arm64_ftr_reg_nowarn(id);
+	if (regp)
+		*valp = arm64_ftr_reg_user_value(regp);
+	else
+		/*
+		 * The untracked registers are either IMPLEMENTATION DEFINED
+		 * (e.g, ID_AFR0_EL1) or reserved RAZ.
+		 */
+		*valp = 0;
+	return 0;
+}
+
+int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt)
+{
+	int rc;
+	u64 val;
+
+	rc = emulate_sys_reg(sys_reg, &val);
+	if (!rc) {
+		pt_regs_write_reg(regs, rt, val);
+		arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+	}
+	return rc;
+}
+
+bool try_emulate_mrs(struct pt_regs *regs, u32 insn)
+{
+	u32 sys_reg, rt;
+
+	if (compat_user_mode(regs) || !aarch64_insn_is_mrs(insn))
+		return false;
+
+	/*
+	 * sys_reg values are defined as used in mrs/msr instruction.
+	 * shift the imm value to get the encoding.
+	 */
+	sys_reg = (u32)aarch64_insn_decode_immediate(AARCH64_INSN_IMM_16, insn) << 5;
+	rt = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RT, insn);
+	return do_emulate_mrs(regs, sys_reg, rt) == 0;
+}
+
+enum mitigation_state arm64_get_meltdown_state(void)
+{
+	if (__meltdown_safe)
+		return SPECTRE_UNAFFECTED;
+
+	if (arm64_kernel_unmapped_at_el0())
+		return SPECTRE_MITIGATED;
+
+	return SPECTRE_VULNERABLE;
+}
+
+ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	switch (arm64_get_meltdown_state()) {
+	case SPECTRE_UNAFFECTED:
+		return sprintf(buf, "Not affected\n");
+
+	case SPECTRE_MITIGATED:
+		return sprintf(buf, "Mitigation: PTI\n");
+
+	default:
+		return sprintf(buf, "Vulnerable\n");
+	}
+}
diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c
new file mode 100644
index 000000000..f37229520
--- /dev/null
+++ b/arch/arm64/kernel/cpuidle.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARM64 CPU idle arch support
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
+#include <linux/psci.h>
+
+#ifdef CONFIG_ACPI_PROCESSOR_IDLE
+
+#include <acpi/processor.h>
+
+#define ARM64_LPI_IS_RETENTION_STATE(arch_flags) (!(arch_flags))
+
+static int psci_acpi_cpu_init_idle(unsigned int cpu)
+{
+	int i, count;
+	struct acpi_lpi_state *lpi;
+	struct acpi_processor *pr = per_cpu(processors, cpu);
+
+	if (unlikely(!pr || !pr->flags.has_lpi))
+		return -EINVAL;
+
+	/*
+	 * If the PSCI cpu_suspend function hook has not been initialized
+	 * idle states must not be enabled, so bail out
+	 */
+	if (!psci_ops.cpu_suspend)
+		return -EOPNOTSUPP;
+
+	count = pr->power.count - 1;
+	if (count <= 0)
+		return -ENODEV;
+
+	for (i = 0; i < count; i++) {
+		u32 state;
+
+		lpi = &pr->power.lpi_states[i + 1];
+		/*
+		 * Only bits[31:0] represent a PSCI power_state while
+		 * bits[63:32] must be 0x0 as per ARM ACPI FFH Specification
+		 */
+		state = lpi->address;
+		if (!psci_power_state_is_valid(state)) {
+			pr_warn("Invalid PSCI power state %#x\n", state);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+int acpi_processor_ffh_lpi_probe(unsigned int cpu)
+{
+	return psci_acpi_cpu_init_idle(cpu);
+}
+
+__cpuidle int acpi_processor_ffh_lpi_enter(struct acpi_lpi_state *lpi)
+{
+	u32 state = lpi->address;
+
+	if (ARM64_LPI_IS_RETENTION_STATE(lpi->arch_flags))
+		return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM_RCU(psci_cpu_suspend_enter,
+						lpi->index, state);
+	else
+		return CPU_PM_CPU_IDLE_ENTER_PARAM_RCU(psci_cpu_suspend_enter,
+					     lpi->index, state);
+}
+#endif
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
new file mode 100644
index 000000000..98fda8500
--- /dev/null
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Record and handle CPU attributes.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ */
+#include <asm/arch_timer.h>
+#include <asm/cache.h>
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpufeature.h>
+#include <asm/fpsimd.h>
+
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/compat.h>
+#include <linux/elf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/personality.h>
+#include <linux/preempt.h>
+#include <linux/printk.h>
+#include <linux/seq_file.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+
+/*
+ * In case the boot CPU is hotpluggable, we record its initial state and
+ * current state separately. Certain system registers may contain different
+ * values depending on configuration at or after reset.
+ */
+DEFINE_PER_CPU(struct cpuinfo_arm64, cpu_data);
+static struct cpuinfo_arm64 boot_cpu_data;
+
+static inline const char *icache_policy_str(int l1ip)
+{
+	switch (l1ip) {
+	case CTR_EL0_L1Ip_VPIPT:
+		return "VPIPT";
+	case CTR_EL0_L1Ip_VIPT:
+		return "VIPT";
+	case CTR_EL0_L1Ip_PIPT:
+		return "PIPT";
+	default:
+		return "RESERVED/UNKNOWN";
+	}
+}
+
+unsigned long __icache_flags;
+
+static const char *const hwcap_str[] = {
+	[KERNEL_HWCAP_FP]		= "fp",
+	[KERNEL_HWCAP_ASIMD]		= "asimd",
+	[KERNEL_HWCAP_EVTSTRM]		= "evtstrm",
+	[KERNEL_HWCAP_AES]		= "aes",
+	[KERNEL_HWCAP_PMULL]		= "pmull",
+	[KERNEL_HWCAP_SHA1]		= "sha1",
+	[KERNEL_HWCAP_SHA2]		= "sha2",
+	[KERNEL_HWCAP_CRC32]		= "crc32",
+	[KERNEL_HWCAP_ATOMICS]		= "atomics",
+	[KERNEL_HWCAP_FPHP]		= "fphp",
+	[KERNEL_HWCAP_ASIMDHP]		= "asimdhp",
+	[KERNEL_HWCAP_CPUID]		= "cpuid",
+	[KERNEL_HWCAP_ASIMDRDM]		= "asimdrdm",
+	[KERNEL_HWCAP_JSCVT]		= "jscvt",
+	[KERNEL_HWCAP_FCMA]		= "fcma",
+	[KERNEL_HWCAP_LRCPC]		= "lrcpc",
+	[KERNEL_HWCAP_DCPOP]		= "dcpop",
+	[KERNEL_HWCAP_SHA3]		= "sha3",
+	[KERNEL_HWCAP_SM3]		= "sm3",
+	[KERNEL_HWCAP_SM4]		= "sm4",
+	[KERNEL_HWCAP_ASIMDDP]		= "asimddp",
+	[KERNEL_HWCAP_SHA512]		= "sha512",
+	[KERNEL_HWCAP_SVE]		= "sve",
+	[KERNEL_HWCAP_ASIMDFHM]		= "asimdfhm",
+	[KERNEL_HWCAP_DIT]		= "dit",
+	[KERNEL_HWCAP_USCAT]		= "uscat",
+	[KERNEL_HWCAP_ILRCPC]		= "ilrcpc",
+	[KERNEL_HWCAP_FLAGM]		= "flagm",
+	[KERNEL_HWCAP_SSBS]		= "ssbs",
+	[KERNEL_HWCAP_SB]		= "sb",
+	[KERNEL_HWCAP_PACA]		= "paca",
+	[KERNEL_HWCAP_PACG]		= "pacg",
+	[KERNEL_HWCAP_DCPODP]		= "dcpodp",
+	[KERNEL_HWCAP_SVE2]		= "sve2",
+	[KERNEL_HWCAP_SVEAES]		= "sveaes",
+	[KERNEL_HWCAP_SVEPMULL]		= "svepmull",
+	[KERNEL_HWCAP_SVEBITPERM]	= "svebitperm",
+	[KERNEL_HWCAP_SVESHA3]		= "svesha3",
+	[KERNEL_HWCAP_SVESM4]		= "svesm4",
+	[KERNEL_HWCAP_FLAGM2]		= "flagm2",
+	[KERNEL_HWCAP_FRINT]		= "frint",
+	[KERNEL_HWCAP_SVEI8MM]		= "svei8mm",
+	[KERNEL_HWCAP_SVEF32MM]		= "svef32mm",
+	[KERNEL_HWCAP_SVEF64MM]		= "svef64mm",
+	[KERNEL_HWCAP_SVEBF16]		= "svebf16",
+	[KERNEL_HWCAP_I8MM]		= "i8mm",
+	[KERNEL_HWCAP_BF16]		= "bf16",
+	[KERNEL_HWCAP_DGH]		= "dgh",
+	[KERNEL_HWCAP_RNG]		= "rng",
+	[KERNEL_HWCAP_BTI]		= "bti",
+	[KERNEL_HWCAP_MTE]		= "mte",
+	[KERNEL_HWCAP_ECV]		= "ecv",
+	[KERNEL_HWCAP_AFP]		= "afp",
+	[KERNEL_HWCAP_RPRES]		= "rpres",
+	[KERNEL_HWCAP_MTE3]		= "mte3",
+	[KERNEL_HWCAP_SME]		= "sme",
+	[KERNEL_HWCAP_SME_I16I64]	= "smei16i64",
+	[KERNEL_HWCAP_SME_F64F64]	= "smef64f64",
+	[KERNEL_HWCAP_SME_I8I32]	= "smei8i32",
+	[KERNEL_HWCAP_SME_F16F32]	= "smef16f32",
+	[KERNEL_HWCAP_SME_B16F32]	= "smeb16f32",
+	[KERNEL_HWCAP_SME_F32F32]	= "smef32f32",
+	[KERNEL_HWCAP_SME_FA64]		= "smefa64",
+	[KERNEL_HWCAP_WFXT]		= "wfxt",
+	[KERNEL_HWCAP_EBF16]		= "ebf16",
+	[KERNEL_HWCAP_SVE_EBF16]	= "sveebf16",
+	[KERNEL_HWCAP_CSSC]		= "cssc",
+	[KERNEL_HWCAP_RPRFM]		= "rprfm",
+	[KERNEL_HWCAP_SVE2P1]		= "sve2p1",
+	[KERNEL_HWCAP_SME2]		= "sme2",
+	[KERNEL_HWCAP_SME2P1]		= "sme2p1",
+	[KERNEL_HWCAP_SME_I16I32]	= "smei16i32",
+	[KERNEL_HWCAP_SME_BI32I32]	= "smebi32i32",
+	[KERNEL_HWCAP_SME_B16B16]	= "smeb16b16",
+	[KERNEL_HWCAP_SME_F16F16]	= "smef16f16",
+	[KERNEL_HWCAP_MOPS]		= "mops",
+	[KERNEL_HWCAP_HBC]		= "hbc",
+};
+
+#ifdef CONFIG_COMPAT
+#define COMPAT_KERNEL_HWCAP(x)	const_ilog2(COMPAT_HWCAP_ ## x)
+static const char *const compat_hwcap_str[] = {
+	[COMPAT_KERNEL_HWCAP(SWP)]	= "swp",
+	[COMPAT_KERNEL_HWCAP(HALF)]	= "half",
+	[COMPAT_KERNEL_HWCAP(THUMB)]	= "thumb",
+	[COMPAT_KERNEL_HWCAP(26BIT)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(FAST_MULT)] = "fastmult",
+	[COMPAT_KERNEL_HWCAP(FPA)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(VFP)]	= "vfp",
+	[COMPAT_KERNEL_HWCAP(EDSP)]	= "edsp",
+	[COMPAT_KERNEL_HWCAP(JAVA)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(IWMMXT)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(CRUNCH)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(THUMBEE)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(NEON)]	= "neon",
+	[COMPAT_KERNEL_HWCAP(VFPv3)]	= "vfpv3",
+	[COMPAT_KERNEL_HWCAP(VFPV3D16)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(TLS)]	= "tls",
+	[COMPAT_KERNEL_HWCAP(VFPv4)]	= "vfpv4",
+	[COMPAT_KERNEL_HWCAP(IDIVA)]	= "idiva",
+	[COMPAT_KERNEL_HWCAP(IDIVT)]	= "idivt",
+	[COMPAT_KERNEL_HWCAP(VFPD32)]	= NULL,	/* Not possible on arm64 */
+	[COMPAT_KERNEL_HWCAP(LPAE)]	= "lpae",
+	[COMPAT_KERNEL_HWCAP(EVTSTRM)]	= "evtstrm",
+	[COMPAT_KERNEL_HWCAP(FPHP)]	= "fphp",
+	[COMPAT_KERNEL_HWCAP(ASIMDHP)]	= "asimdhp",
+	[COMPAT_KERNEL_HWCAP(ASIMDDP)]	= "asimddp",
+	[COMPAT_KERNEL_HWCAP(ASIMDFHM)]	= "asimdfhm",
+	[COMPAT_KERNEL_HWCAP(ASIMDBF16)] = "asimdbf16",
+	[COMPAT_KERNEL_HWCAP(I8MM)]	= "i8mm",
+};
+
+#define COMPAT_KERNEL_HWCAP2(x)	const_ilog2(COMPAT_HWCAP2_ ## x)
+static const char *const compat_hwcap2_str[] = {
+	[COMPAT_KERNEL_HWCAP2(AES)]	= "aes",
+	[COMPAT_KERNEL_HWCAP2(PMULL)]	= "pmull",
+	[COMPAT_KERNEL_HWCAP2(SHA1)]	= "sha1",
+	[COMPAT_KERNEL_HWCAP2(SHA2)]	= "sha2",
+	[COMPAT_KERNEL_HWCAP2(CRC32)]	= "crc32",
+	[COMPAT_KERNEL_HWCAP2(SB)]	= "sb",
+	[COMPAT_KERNEL_HWCAP2(SSBS)]	= "ssbs",
+};
+#endif /* CONFIG_COMPAT */
+
+static int c_show(struct seq_file *m, void *v)
+{
+	int i, j;
+	bool compat = personality(current->personality) == PER_LINUX32;
+
+	for_each_online_cpu(i) {
+		struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
+		u32 midr = cpuinfo->reg_midr;
+
+		/*
+		 * glibc reads /proc/cpuinfo to determine the number of
+		 * online processors, looking for lines beginning with
+		 * "processor".  Give glibc what it expects.
+		 */
+		seq_printf(m, "processor\t: %d\n", i);
+		if (compat)
+			seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
+				   MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
+
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   loops_per_jiffy / (500000UL/HZ),
+			   loops_per_jiffy / (5000UL/HZ) % 100);
+
+		/*
+		 * Dump out the common processor features in a single line.
+		 * Userspace should read the hwcaps with getauxval(AT_HWCAP)
+		 * rather than attempting to parse this, but there's a body of
+		 * software which does already (at least for 32-bit).
+		 */
+		seq_puts(m, "Features\t:");
+		if (compat) {
+#ifdef CONFIG_COMPAT
+			for (j = 0; j < ARRAY_SIZE(compat_hwcap_str); j++) {
+				if (compat_elf_hwcap & (1 << j)) {
+					/*
+					 * Warn once if any feature should not
+					 * have been present on arm64 platform.
+					 */
+					if (WARN_ON_ONCE(!compat_hwcap_str[j]))
+						continue;
+
+					seq_printf(m, " %s", compat_hwcap_str[j]);
+				}
+			}
+
+			for (j = 0; j < ARRAY_SIZE(compat_hwcap2_str); j++)
+				if (compat_elf_hwcap2 & (1 << j))
+					seq_printf(m, " %s", compat_hwcap2_str[j]);
+#endif /* CONFIG_COMPAT */
+		} else {
+			for (j = 0; j < ARRAY_SIZE(hwcap_str); j++)
+				if (cpu_have_feature(j))
+					seq_printf(m, " %s", hwcap_str[j]);
+		}
+		seq_puts(m, "\n");
+
+		seq_printf(m, "CPU implementer\t: 0x%02x\n",
+			   MIDR_IMPLEMENTOR(midr));
+		seq_printf(m, "CPU architecture: 8\n");
+		seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
+		seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
+		seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
+	}
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < 1 ? (void *)1 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return NULL;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= c_show
+};
+
+
+static struct kobj_type cpuregs_kobj_type = {
+	.sysfs_ops = &kobj_sysfs_ops,
+};
+
+/*
+ * The ARM ARM uses the phrase "32-bit register" to describe a register
+ * whose upper 32 bits are RES0 (per C5.1.1, ARM DDI 0487A.i), however
+ * no statement is made as to whether the upper 32 bits will or will not
+ * be made use of in future, and between ARM DDI 0487A.c and ARM DDI
+ * 0487A.d CLIDR_EL1 was expanded from 32-bit to 64-bit.
+ *
+ * Thus, while both MIDR_EL1 and REVIDR_EL1 are described as 32-bit
+ * registers, we expose them both as 64 bit values to cater for possible
+ * future expansion without an ABI break.
+ */
+#define kobj_to_cpuinfo(kobj)	container_of(kobj, struct cpuinfo_arm64, kobj)
+#define CPUREGS_ATTR_RO(_name, _field)						\
+	static ssize_t _name##_show(struct kobject *kobj,			\
+			struct kobj_attribute *attr, char *buf)			\
+	{									\
+		struct cpuinfo_arm64 *info = kobj_to_cpuinfo(kobj);		\
+										\
+		if (info->reg_midr)						\
+			return sprintf(buf, "0x%016llx\n", info->reg_##_field);	\
+		else								\
+			return 0;						\
+	}									\
+	static struct kobj_attribute cpuregs_attr_##_name = __ATTR_RO(_name)
+
+CPUREGS_ATTR_RO(midr_el1, midr);
+CPUREGS_ATTR_RO(revidr_el1, revidr);
+CPUREGS_ATTR_RO(smidr_el1, smidr);
+
+static struct attribute *cpuregs_id_attrs[] = {
+	&cpuregs_attr_midr_el1.attr,
+	&cpuregs_attr_revidr_el1.attr,
+	NULL
+};
+
+static const struct attribute_group cpuregs_attr_group = {
+	.attrs = cpuregs_id_attrs,
+	.name = "identification"
+};
+
+static struct attribute *sme_cpuregs_id_attrs[] = {
+	&cpuregs_attr_smidr_el1.attr,
+	NULL
+};
+
+static const struct attribute_group sme_cpuregs_attr_group = {
+	.attrs = sme_cpuregs_id_attrs,
+	.name = "identification"
+};
+
+static int cpuid_cpu_online(unsigned int cpu)
+{
+	int rc;
+	struct device *dev;
+	struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+
+	dev = get_cpu_device(cpu);
+	if (!dev) {
+		rc = -ENODEV;
+		goto out;
+	}
+	rc = kobject_add(&info->kobj, &dev->kobj, "regs");
+	if (rc)
+		goto out;
+	rc = sysfs_create_group(&info->kobj, &cpuregs_attr_group);
+	if (rc)
+		kobject_del(&info->kobj);
+	if (system_supports_sme())
+		rc = sysfs_merge_group(&info->kobj, &sme_cpuregs_attr_group);
+out:
+	return rc;
+}
+
+static int cpuid_cpu_offline(unsigned int cpu)
+{
+	struct device *dev;
+	struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+
+	dev = get_cpu_device(cpu);
+	if (!dev)
+		return -ENODEV;
+	if (info->kobj.parent) {
+		sysfs_remove_group(&info->kobj, &cpuregs_attr_group);
+		kobject_del(&info->kobj);
+	}
+
+	return 0;
+}
+
+static int __init cpuinfo_regs_init(void)
+{
+	int cpu, ret;
+
+	for_each_possible_cpu(cpu) {
+		struct cpuinfo_arm64 *info = &per_cpu(cpu_data, cpu);
+
+		kobject_init(&info->kobj, &cpuregs_kobj_type);
+	}
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "arm64/cpuinfo:online",
+				cpuid_cpu_online, cpuid_cpu_offline);
+	if (ret < 0) {
+		pr_err("cpuinfo: failed to register hotplug callbacks.\n");
+		return ret;
+	}
+	return 0;
+}
+device_initcall(cpuinfo_regs_init);
+
+static void cpuinfo_detect_icache_policy(struct cpuinfo_arm64 *info)
+{
+	unsigned int cpu = smp_processor_id();
+	u32 l1ip = CTR_L1IP(info->reg_ctr);
+
+	switch (l1ip) {
+	case CTR_EL0_L1Ip_PIPT:
+		break;
+	case CTR_EL0_L1Ip_VPIPT:
+		set_bit(ICACHEF_VPIPT, &__icache_flags);
+		break;
+	case CTR_EL0_L1Ip_VIPT:
+	default:
+		/* Assume aliasing */
+		set_bit(ICACHEF_ALIASING, &__icache_flags);
+		break;
+	}
+
+	pr_info("Detected %s I-cache on CPU%d\n", icache_policy_str(l1ip), cpu);
+}
+
+static void __cpuinfo_store_cpu_32bit(struct cpuinfo_32bit *info)
+{
+	info->reg_id_dfr0 = read_cpuid(ID_DFR0_EL1);
+	info->reg_id_dfr1 = read_cpuid(ID_DFR1_EL1);
+	info->reg_id_isar0 = read_cpuid(ID_ISAR0_EL1);
+	info->reg_id_isar1 = read_cpuid(ID_ISAR1_EL1);
+	info->reg_id_isar2 = read_cpuid(ID_ISAR2_EL1);
+	info->reg_id_isar3 = read_cpuid(ID_ISAR3_EL1);
+	info->reg_id_isar4 = read_cpuid(ID_ISAR4_EL1);
+	info->reg_id_isar5 = read_cpuid(ID_ISAR5_EL1);
+	info->reg_id_isar6 = read_cpuid(ID_ISAR6_EL1);
+	info->reg_id_mmfr0 = read_cpuid(ID_MMFR0_EL1);
+	info->reg_id_mmfr1 = read_cpuid(ID_MMFR1_EL1);
+	info->reg_id_mmfr2 = read_cpuid(ID_MMFR2_EL1);
+	info->reg_id_mmfr3 = read_cpuid(ID_MMFR3_EL1);
+	info->reg_id_mmfr4 = read_cpuid(ID_MMFR4_EL1);
+	info->reg_id_mmfr5 = read_cpuid(ID_MMFR5_EL1);
+	info->reg_id_pfr0 = read_cpuid(ID_PFR0_EL1);
+	info->reg_id_pfr1 = read_cpuid(ID_PFR1_EL1);
+	info->reg_id_pfr2 = read_cpuid(ID_PFR2_EL1);
+
+	info->reg_mvfr0 = read_cpuid(MVFR0_EL1);
+	info->reg_mvfr1 = read_cpuid(MVFR1_EL1);
+	info->reg_mvfr2 = read_cpuid(MVFR2_EL1);
+}
+
+static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
+{
+	info->reg_cntfrq = arch_timer_get_cntfrq();
+	/*
+	 * Use the effective value of the CTR_EL0 than the raw value
+	 * exposed by the CPU. CTR_EL0.IDC field value must be interpreted
+	 * with the CLIDR_EL1 fields to avoid triggering false warnings
+	 * when there is a mismatch across the CPUs. Keep track of the
+	 * effective value of the CTR_EL0 in our internal records for
+	 * accurate sanity check and feature enablement.
+	 */
+	info->reg_ctr = read_cpuid_effective_cachetype();
+	info->reg_dczid = read_cpuid(DCZID_EL0);
+	info->reg_midr = read_cpuid_id();
+	info->reg_revidr = read_cpuid(REVIDR_EL1);
+
+	info->reg_id_aa64dfr0 = read_cpuid(ID_AA64DFR0_EL1);
+	info->reg_id_aa64dfr1 = read_cpuid(ID_AA64DFR1_EL1);
+	info->reg_id_aa64isar0 = read_cpuid(ID_AA64ISAR0_EL1);
+	info->reg_id_aa64isar1 = read_cpuid(ID_AA64ISAR1_EL1);
+	info->reg_id_aa64isar2 = read_cpuid(ID_AA64ISAR2_EL1);
+	info->reg_id_aa64mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
+	info->reg_id_aa64mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
+	info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
+	info->reg_id_aa64mmfr3 = read_cpuid(ID_AA64MMFR3_EL1);
+	info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
+	info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
+	info->reg_id_aa64zfr0 = read_cpuid(ID_AA64ZFR0_EL1);
+	info->reg_id_aa64smfr0 = read_cpuid(ID_AA64SMFR0_EL1);
+
+	if (id_aa64pfr1_mte(info->reg_id_aa64pfr1))
+		info->reg_gmid = read_cpuid(GMID_EL1);
+
+	if (id_aa64pfr0_32bit_el0(info->reg_id_aa64pfr0))
+		__cpuinfo_store_cpu_32bit(&info->aarch32);
+
+	cpuinfo_detect_icache_policy(info);
+}
+
+void cpuinfo_store_cpu(void)
+{
+	struct cpuinfo_arm64 *info = this_cpu_ptr(&cpu_data);
+	__cpuinfo_store_cpu(info);
+	update_cpu_features(smp_processor_id(), info, &boot_cpu_data);
+}
+
+void __init cpuinfo_store_boot_cpu(void)
+{
+	struct cpuinfo_arm64 *info = &per_cpu(cpu_data, 0);
+	__cpuinfo_store_cpu(info);
+
+	boot_cpu_data = *info;
+	init_cpu_features(&boot_cpu_data);
+}
diff --git a/arch/arm64/kernel/crash_core.c b/arch/arm64/kernel/crash_core.c
new file mode 100644
index 000000000..66cde752c
--- /dev/null
+++ b/arch/arm64/kernel/crash_core.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ */
+
+#include <linux/crash_core.h>
+#include <asm/cpufeature.h>
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pointer_auth.h>
+
+static inline u64 get_tcr_el1_t1sz(void);
+
+static inline u64 get_tcr_el1_t1sz(void)
+{
+	return (read_sysreg(tcr_el1) & TCR_T1SZ_MASK) >> TCR_T1SZ_OFFSET;
+}
+
+void arch_crash_save_vmcoreinfo(void)
+{
+	VMCOREINFO_NUMBER(VA_BITS);
+	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
+	vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
+	vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
+	vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
+	vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
+	vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
+	vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
+	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
+						kimage_voffset);
+	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
+						PHYS_OFFSET);
+	vmcoreinfo_append_str("NUMBER(TCR_EL1_T1SZ)=0x%llx\n",
+						get_tcr_el1_t1sz());
+	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
+	vmcoreinfo_append_str("NUMBER(KERNELPACMASK)=0x%llx\n",
+						system_supports_address_auth() ?
+						ptrauth_kernel_pac_mask() : 0);
+}
diff --git a/arch/arm64/kernel/crash_dump.c b/arch/arm64/kernel/crash_dump.c
new file mode 100644
index 000000000..670e4ce81
--- /dev/null
+++ b/arch/arm64/kernel/crash_dump.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Routines for doing kexec-based kdump
+ *
+ * Copyright (C) 2017 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+
+#include <linux/crash_dump.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/uio.h>
+#include <asm/memory.h>
+
+ssize_t copy_oldmem_page(struct iov_iter *iter, unsigned long pfn,
+			 size_t csize, unsigned long offset)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = memremap(__pfn_to_phys(pfn), PAGE_SIZE, MEMREMAP_WB);
+	if (!vaddr)
+		return -ENOMEM;
+
+	csize = copy_to_iter(vaddr + offset, csize, iter);
+
+	memunmap(vaddr);
+
+	return csize;
+}
+
+/**
+ * elfcorehdr_read - read from ELF core header
+ * @buf: buffer where the data is placed
+ * @count: number of bytes to read
+ * @ppos: address in the memory
+ *
+ * This function reads @count bytes from elf core header which exists
+ * on crash dump kernel's memory.
+ */
+ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
+{
+	memcpy(buf, phys_to_virt((phys_addr_t)*ppos), count);
+	*ppos += count;
+
+	return count;
+}
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
new file mode 100644
index 000000000..64f2ecbdf
--- /dev/null
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARMv8 single-step debug support and mdscr context switching.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/cpu.h>
+#include <linux/debugfs.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/kprobes.h>
+#include <linux/stat.h>
+#include <linux/uaccess.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/cpufeature.h>
+#include <asm/cputype.h>
+#include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
+#include <asm/system_misc.h>
+#include <asm/traps.h>
+
+/* Determine debug architecture. */
+u8 debug_monitors_arch(void)
+{
+	return cpuid_feature_extract_unsigned_field(read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1),
+						ID_AA64DFR0_EL1_DebugVer_SHIFT);
+}
+
+/*
+ * MDSCR access routines.
+ */
+static void mdscr_write(u32 mdscr)
+{
+	unsigned long flags;
+	flags = local_daif_save();
+	write_sysreg(mdscr, mdscr_el1);
+	local_daif_restore(flags);
+}
+NOKPROBE_SYMBOL(mdscr_write);
+
+static u32 mdscr_read(void)
+{
+	return read_sysreg(mdscr_el1);
+}
+NOKPROBE_SYMBOL(mdscr_read);
+
+/*
+ * Allow root to disable self-hosted debug from userspace.
+ * This is useful if you want to connect an external JTAG debugger.
+ */
+static bool debug_enabled = true;
+
+static int create_debug_debugfs_entry(void)
+{
+	debugfs_create_bool("debug_enabled", 0644, NULL, &debug_enabled);
+	return 0;
+}
+fs_initcall(create_debug_debugfs_entry);
+
+static int __init early_debug_disable(char *buf)
+{
+	debug_enabled = false;
+	return 0;
+}
+
+early_param("nodebugmon", early_debug_disable);
+
+/*
+ * Keep track of debug users on each core.
+ * The ref counts are per-cpu so we use a local_t type.
+ */
+static DEFINE_PER_CPU(int, mde_ref_count);
+static DEFINE_PER_CPU(int, kde_ref_count);
+
+void enable_debug_monitors(enum dbg_active_el el)
+{
+	u32 mdscr, enable = 0;
+
+	WARN_ON(preemptible());
+
+	if (this_cpu_inc_return(mde_ref_count) == 1)
+		enable = DBG_MDSCR_MDE;
+
+	if (el == DBG_ACTIVE_EL1 &&
+	    this_cpu_inc_return(kde_ref_count) == 1)
+		enable |= DBG_MDSCR_KDE;
+
+	if (enable && debug_enabled) {
+		mdscr = mdscr_read();
+		mdscr |= enable;
+		mdscr_write(mdscr);
+	}
+}
+NOKPROBE_SYMBOL(enable_debug_monitors);
+
+void disable_debug_monitors(enum dbg_active_el el)
+{
+	u32 mdscr, disable = 0;
+
+	WARN_ON(preemptible());
+
+	if (this_cpu_dec_return(mde_ref_count) == 0)
+		disable = ~DBG_MDSCR_MDE;
+
+	if (el == DBG_ACTIVE_EL1 &&
+	    this_cpu_dec_return(kde_ref_count) == 0)
+		disable &= ~DBG_MDSCR_KDE;
+
+	if (disable) {
+		mdscr = mdscr_read();
+		mdscr &= disable;
+		mdscr_write(mdscr);
+	}
+}
+NOKPROBE_SYMBOL(disable_debug_monitors);
+
+/*
+ * OS lock clearing.
+ */
+static int clear_os_lock(unsigned int cpu)
+{
+	write_sysreg(0, osdlr_el1);
+	write_sysreg(0, oslar_el1);
+	isb();
+	return 0;
+}
+
+static int __init debug_monitors_init(void)
+{
+	return cpuhp_setup_state(CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING,
+				 "arm64/debug_monitors:starting",
+				 clear_os_lock, NULL);
+}
+postcore_initcall(debug_monitors_init);
+
+/*
+ * Single step API and exception handling.
+ */
+static void set_user_regs_spsr_ss(struct user_pt_regs *regs)
+{
+	regs->pstate |= DBG_SPSR_SS;
+}
+NOKPROBE_SYMBOL(set_user_regs_spsr_ss);
+
+static void clear_user_regs_spsr_ss(struct user_pt_regs *regs)
+{
+	regs->pstate &= ~DBG_SPSR_SS;
+}
+NOKPROBE_SYMBOL(clear_user_regs_spsr_ss);
+
+#define set_regs_spsr_ss(r)	set_user_regs_spsr_ss(&(r)->user_regs)
+#define clear_regs_spsr_ss(r)	clear_user_regs_spsr_ss(&(r)->user_regs)
+
+static DEFINE_SPINLOCK(debug_hook_lock);
+static LIST_HEAD(user_step_hook);
+static LIST_HEAD(kernel_step_hook);
+
+static void register_debug_hook(struct list_head *node, struct list_head *list)
+{
+	spin_lock(&debug_hook_lock);
+	list_add_rcu(node, list);
+	spin_unlock(&debug_hook_lock);
+
+}
+
+static void unregister_debug_hook(struct list_head *node)
+{
+	spin_lock(&debug_hook_lock);
+	list_del_rcu(node);
+	spin_unlock(&debug_hook_lock);
+	synchronize_rcu();
+}
+
+void register_user_step_hook(struct step_hook *hook)
+{
+	register_debug_hook(&hook->node, &user_step_hook);
+}
+
+void unregister_user_step_hook(struct step_hook *hook)
+{
+	unregister_debug_hook(&hook->node);
+}
+
+void register_kernel_step_hook(struct step_hook *hook)
+{
+	register_debug_hook(&hook->node, &kernel_step_hook);
+}
+
+void unregister_kernel_step_hook(struct step_hook *hook)
+{
+	unregister_debug_hook(&hook->node);
+}
+
+/*
+ * Call registered single step handlers
+ * There is no Syndrome info to check for determining the handler.
+ * So we call all the registered handlers, until the right handler is
+ * found which returns zero.
+ */
+static int call_step_hook(struct pt_regs *regs, unsigned long esr)
+{
+	struct step_hook *hook;
+	struct list_head *list;
+	int retval = DBG_HOOK_ERROR;
+
+	list = user_mode(regs) ? &user_step_hook : &kernel_step_hook;
+
+	/*
+	 * Since single-step exception disables interrupt, this function is
+	 * entirely not preemptible, and we can use rcu list safely here.
+	 */
+	list_for_each_entry_rcu(hook, list, node)	{
+		retval = hook->fn(regs, esr);
+		if (retval == DBG_HOOK_HANDLED)
+			break;
+	}
+
+	return retval;
+}
+NOKPROBE_SYMBOL(call_step_hook);
+
+static void send_user_sigtrap(int si_code)
+{
+	struct pt_regs *regs = current_pt_regs();
+
+	if (WARN_ON(!user_mode(regs)))
+		return;
+
+	if (interrupts_enabled(regs))
+		local_irq_enable();
+
+	arm64_force_sig_fault(SIGTRAP, si_code, instruction_pointer(regs),
+			      "User debug trap");
+}
+
+static int single_step_handler(unsigned long unused, unsigned long esr,
+			       struct pt_regs *regs)
+{
+	bool handler_found = false;
+
+	/*
+	 * If we are stepping a pending breakpoint, call the hw_breakpoint
+	 * handler first.
+	 */
+	if (!reinstall_suspended_bps(regs))
+		return 0;
+
+	if (!handler_found && call_step_hook(regs, esr) == DBG_HOOK_HANDLED)
+		handler_found = true;
+
+	if (!handler_found && user_mode(regs)) {
+		send_user_sigtrap(TRAP_TRACE);
+
+		/*
+		 * ptrace will disable single step unless explicitly
+		 * asked to re-enable it. For other clients, it makes
+		 * sense to leave it enabled (i.e. rewind the controls
+		 * to the active-not-pending state).
+		 */
+		user_rewind_single_step(current);
+	} else if (!handler_found) {
+		pr_warn("Unexpected kernel single-step exception at EL1\n");
+		/*
+		 * Re-enable stepping since we know that we will be
+		 * returning to regs.
+		 */
+		set_regs_spsr_ss(regs);
+	}
+
+	return 0;
+}
+NOKPROBE_SYMBOL(single_step_handler);
+
+static LIST_HEAD(user_break_hook);
+static LIST_HEAD(kernel_break_hook);
+
+void register_user_break_hook(struct break_hook *hook)
+{
+	register_debug_hook(&hook->node, &user_break_hook);
+}
+
+void unregister_user_break_hook(struct break_hook *hook)
+{
+	unregister_debug_hook(&hook->node);
+}
+
+void register_kernel_break_hook(struct break_hook *hook)
+{
+	register_debug_hook(&hook->node, &kernel_break_hook);
+}
+
+void unregister_kernel_break_hook(struct break_hook *hook)
+{
+	unregister_debug_hook(&hook->node);
+}
+
+static int call_break_hook(struct pt_regs *regs, unsigned long esr)
+{
+	struct break_hook *hook;
+	struct list_head *list;
+	int (*fn)(struct pt_regs *regs, unsigned long esr) = NULL;
+
+	list = user_mode(regs) ? &user_break_hook : &kernel_break_hook;
+
+	/*
+	 * Since brk exception disables interrupt, this function is
+	 * entirely not preemptible, and we can use rcu list safely here.
+	 */
+	list_for_each_entry_rcu(hook, list, node) {
+		unsigned long comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK;
+
+		if ((comment & ~hook->mask) == hook->imm)
+			fn = hook->fn;
+	}
+
+	return fn ? fn(regs, esr) : DBG_HOOK_ERROR;
+}
+NOKPROBE_SYMBOL(call_break_hook);
+
+static int brk_handler(unsigned long unused, unsigned long esr,
+		       struct pt_regs *regs)
+{
+	if (call_break_hook(regs, esr) == DBG_HOOK_HANDLED)
+		return 0;
+
+	if (user_mode(regs)) {
+		send_user_sigtrap(TRAP_BRKPT);
+	} else {
+		pr_warn("Unexpected kernel BRK exception at EL1\n");
+		return -EFAULT;
+	}
+
+	return 0;
+}
+NOKPROBE_SYMBOL(brk_handler);
+
+int aarch32_break_handler(struct pt_regs *regs)
+{
+	u32 arm_instr;
+	u16 thumb_instr;
+	bool bp = false;
+	void __user *pc = (void __user *)instruction_pointer(regs);
+
+	if (!compat_user_mode(regs))
+		return -EFAULT;
+
+	if (compat_thumb_mode(regs)) {
+		/* get 16-bit Thumb instruction */
+		__le16 instr;
+		get_user(instr, (__le16 __user *)pc);
+		thumb_instr = le16_to_cpu(instr);
+		if (thumb_instr == AARCH32_BREAK_THUMB2_LO) {
+			/* get second half of 32-bit Thumb-2 instruction */
+			get_user(instr, (__le16 __user *)(pc + 2));
+			thumb_instr = le16_to_cpu(instr);
+			bp = thumb_instr == AARCH32_BREAK_THUMB2_HI;
+		} else {
+			bp = thumb_instr == AARCH32_BREAK_THUMB;
+		}
+	} else {
+		/* 32-bit ARM instruction */
+		__le32 instr;
+		get_user(instr, (__le32 __user *)pc);
+		arm_instr = le32_to_cpu(instr);
+		bp = (arm_instr & ~0xf0000000) == AARCH32_BREAK_ARM;
+	}
+
+	if (!bp)
+		return -EFAULT;
+
+	send_user_sigtrap(TRAP_BRKPT);
+	return 0;
+}
+NOKPROBE_SYMBOL(aarch32_break_handler);
+
+void __init debug_traps_init(void)
+{
+	hook_debug_fault_code(DBG_ESR_EVT_HWSS, single_step_handler, SIGTRAP,
+			      TRAP_TRACE, "single-step handler");
+	hook_debug_fault_code(DBG_ESR_EVT_BRK, brk_handler, SIGTRAP,
+			      TRAP_BRKPT, "BRK handler");
+}
+
+/* Re-enable single step for syscall restarting. */
+void user_rewind_single_step(struct task_struct *task)
+{
+	/*
+	 * If single step is active for this thread, then set SPSR.SS
+	 * to 1 to avoid returning to the active-pending state.
+	 */
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		set_regs_spsr_ss(task_pt_regs(task));
+}
+NOKPROBE_SYMBOL(user_rewind_single_step);
+
+void user_fastforward_single_step(struct task_struct *task)
+{
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		clear_regs_spsr_ss(task_pt_regs(task));
+}
+
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task)
+{
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		set_user_regs_spsr_ss(regs);
+	else
+		clear_user_regs_spsr_ss(regs);
+}
+
+/* Kernel API */
+void kernel_enable_single_step(struct pt_regs *regs)
+{
+	WARN_ON(!irqs_disabled());
+	set_regs_spsr_ss(regs);
+	mdscr_write(mdscr_read() | DBG_MDSCR_SS);
+	enable_debug_monitors(DBG_ACTIVE_EL1);
+}
+NOKPROBE_SYMBOL(kernel_enable_single_step);
+
+void kernel_disable_single_step(void)
+{
+	WARN_ON(!irqs_disabled());
+	mdscr_write(mdscr_read() & ~DBG_MDSCR_SS);
+	disable_debug_monitors(DBG_ACTIVE_EL1);
+}
+NOKPROBE_SYMBOL(kernel_disable_single_step);
+
+int kernel_active_single_step(void)
+{
+	WARN_ON(!irqs_disabled());
+	return mdscr_read() & DBG_MDSCR_SS;
+}
+NOKPROBE_SYMBOL(kernel_active_single_step);
+
+void kernel_rewind_single_step(struct pt_regs *regs)
+{
+	set_regs_spsr_ss(regs);
+}
+
+/* ptrace API */
+void user_enable_single_step(struct task_struct *task)
+{
+	struct thread_info *ti = task_thread_info(task);
+
+	if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP))
+		set_regs_spsr_ss(task_pt_regs(task));
+}
+NOKPROBE_SYMBOL(user_enable_single_step);
+
+void user_disable_single_step(struct task_struct *task)
+{
+	clear_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP);
+}
+NOKPROBE_SYMBOL(user_disable_single_step);
diff --git a/arch/arm64/kernel/efi-header.S b/arch/arm64/kernel/efi-header.S
new file mode 100644
index 000000000..11d7f7de2
--- /dev/null
+++ b/arch/arm64/kernel/efi-header.S
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 - 2017 Linaro, Ltd.
+ * Copyright (C) 2013, 2014 Red Hat, Inc.
+ */
+
+#include <linux/pe.h>
+#include <linux/sizes.h>
+
+	.macro	efi_signature_nop
+#ifdef CONFIG_EFI
+.L_head:
+	/*
+	 * This ccmp instruction has no meaningful effect except that
+	 * its opcode forms the magic "MZ" signature required by UEFI.
+	 */
+	ccmp	x18, #0, #0xd, pl
+#else
+	/*
+	 * Bootloaders may inspect the opcode at the start of the kernel
+	 * image to decide if the kernel is capable of booting via UEFI.
+	 * So put an ordinary NOP here, not the "MZ.." pseudo-nop above.
+	 */
+	nop
+#endif
+	.endm
+
+	.macro	__EFI_PE_HEADER
+#ifdef CONFIG_EFI
+	.set	.Lpe_header_offset, . - .L_head
+	.long	PE_MAGIC
+	.short	IMAGE_FILE_MACHINE_ARM64		// Machine
+	.short	.Lsection_count				// NumberOfSections
+	.long	0 					// TimeDateStamp
+	.long	0					// PointerToSymbolTable
+	.long	0					// NumberOfSymbols
+	.short	.Lsection_table - .Loptional_header	// SizeOfOptionalHeader
+	.short	IMAGE_FILE_DEBUG_STRIPPED | \
+		IMAGE_FILE_EXECUTABLE_IMAGE | \
+		IMAGE_FILE_LINE_NUMS_STRIPPED		// Characteristics
+
+.Loptional_header:
+	.short	PE_OPT_MAGIC_PE32PLUS			// PE32+ format
+	.byte	0x02					// MajorLinkerVersion
+	.byte	0x14					// MinorLinkerVersion
+	.long	__initdata_begin - .Lefi_header_end	// SizeOfCode
+	.long	__pecoff_data_size			// SizeOfInitializedData
+	.long	0					// SizeOfUninitializedData
+	.long	__efistub_efi_pe_entry - .L_head	// AddressOfEntryPoint
+	.long	.Lefi_header_end - .L_head		// BaseOfCode
+
+	.quad	0					// ImageBase
+	.long	SEGMENT_ALIGN				// SectionAlignment
+	.long	PECOFF_FILE_ALIGNMENT			// FileAlignment
+	.short	0					// MajorOperatingSystemVersion
+	.short	0					// MinorOperatingSystemVersion
+	.short	LINUX_EFISTUB_MAJOR_VERSION		// MajorImageVersion
+	.short	LINUX_EFISTUB_MINOR_VERSION		// MinorImageVersion
+	.short	0					// MajorSubsystemVersion
+	.short	0					// MinorSubsystemVersion
+	.long	0					// Win32VersionValue
+
+	.long	_end - .L_head				// SizeOfImage
+
+	// Everything before the kernel image is considered part of the header
+	.long	.Lefi_header_end - .L_head		// SizeOfHeaders
+	.long	0					// CheckSum
+	.short	IMAGE_SUBSYSTEM_EFI_APPLICATION		// Subsystem
+	.short	IMAGE_DLL_CHARACTERISTICS_NX_COMPAT	// DllCharacteristics
+	.quad	0					// SizeOfStackReserve
+	.quad	0					// SizeOfStackCommit
+	.quad	0					// SizeOfHeapReserve
+	.quad	0					// SizeOfHeapCommit
+	.long	0					// LoaderFlags
+	.long	(.Lsection_table - .) / 8		// NumberOfRvaAndSizes
+
+	.quad	0					// ExportTable
+	.quad	0					// ImportTable
+	.quad	0					// ResourceTable
+	.quad	0					// ExceptionTable
+	.quad	0					// CertificationTable
+	.quad	0					// BaseRelocationTable
+
+#if defined(CONFIG_DEBUG_EFI) || defined(CONFIG_ARM64_BTI_KERNEL)
+	.long	.Lefi_debug_table - .L_head		// DebugTable
+	.long	.Lefi_debug_table_size
+
+	/*
+	 * The debug table is referenced via its Relative Virtual Address (RVA),
+	 * which is only defined for those parts of the image that are covered
+	 * by a section declaration. Since this header is not covered by any
+	 * section, the debug table must be emitted elsewhere. So stick it in
+	 * the .init.rodata section instead.
+	 *
+	 * Note that the payloads themselves are permitted to have zero RVAs,
+	 * which means we can simply put those right after the section headers.
+	 */
+	__INITRODATA
+
+	.align	2
+.Lefi_debug_table:
+#ifdef CONFIG_DEBUG_EFI
+	// EFI_IMAGE_DEBUG_DIRECTORY_ENTRY
+	.long	0					// Characteristics
+	.long	0					// TimeDateStamp
+	.short	0					// MajorVersion
+	.short	0					// MinorVersion
+	.long	IMAGE_DEBUG_TYPE_CODEVIEW		// Type
+	.long	.Lefi_debug_entry_size			// SizeOfData
+	.long	0					// RVA
+	.long	.Lefi_debug_entry - .L_head		// FileOffset
+#endif
+#ifdef CONFIG_ARM64_BTI_KERNEL
+	.long	0					// Characteristics
+	.long	0					// TimeDateStamp
+	.short	0					// MajorVersion
+	.short	0					// MinorVersion
+	.long	IMAGE_DEBUG_TYPE_EX_DLLCHARACTERISTICS	// Type
+	.long	4					// SizeOfData
+	.long	0					// RVA
+	.long	.Lefi_dll_characteristics_ex - .L_head	// FileOffset
+#endif
+	.set	.Lefi_debug_table_size, . - .Lefi_debug_table
+	.previous
+#endif
+
+	// Section table
+.Lsection_table:
+	.ascii	".text\0\0\0"
+	.long	__initdata_begin - .Lefi_header_end	// VirtualSize
+	.long	.Lefi_header_end - .L_head		// VirtualAddress
+	.long	__initdata_begin - .Lefi_header_end	// SizeOfRawData
+	.long	.Lefi_header_end - .L_head		// PointerToRawData
+
+	.long	0					// PointerToRelocations
+	.long	0					// PointerToLineNumbers
+	.short	0					// NumberOfRelocations
+	.short	0					// NumberOfLineNumbers
+	.long	IMAGE_SCN_CNT_CODE | \
+		IMAGE_SCN_MEM_READ | \
+		IMAGE_SCN_MEM_EXECUTE			// Characteristics
+
+	.ascii	".data\0\0\0"
+	.long	__pecoff_data_size			// VirtualSize
+	.long	__initdata_begin - .L_head		// VirtualAddress
+	.long	__pecoff_data_rawsize			// SizeOfRawData
+	.long	__initdata_begin - .L_head		// PointerToRawData
+
+	.long	0					// PointerToRelocations
+	.long	0					// PointerToLineNumbers
+	.short	0					// NumberOfRelocations
+	.short	0					// NumberOfLineNumbers
+	.long	IMAGE_SCN_CNT_INITIALIZED_DATA | \
+		IMAGE_SCN_MEM_READ | \
+		IMAGE_SCN_MEM_WRITE			// Characteristics
+
+	.set	.Lsection_count, (. - .Lsection_table) / 40
+
+#ifdef CONFIG_DEBUG_EFI
+.Lefi_debug_entry:
+	// EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY
+	.ascii	"NB10"					// Signature
+	.long	0					// Unknown
+	.long	0					// Unknown2
+	.long	0					// Unknown3
+
+	.asciz	VMLINUX_PATH
+
+	.set	.Lefi_debug_entry_size, . - .Lefi_debug_entry
+#endif
+#ifdef CONFIG_ARM64_BTI_KERNEL
+.Lefi_dll_characteristics_ex:
+	.long	IMAGE_DLLCHARACTERISTICS_EX_FORWARD_CFI_COMPAT
+#endif
+
+	.balign	SEGMENT_ALIGN
+.Lefi_header_end:
+#else
+	.set	.Lpe_header_offset, 0x0
+#endif
+	.endm
diff --git a/arch/arm64/kernel/efi-rt-wrapper.S b/arch/arm64/kernel/efi-rt-wrapper.S
new file mode 100644
index 000000000..e8ae80366
--- /dev/null
+++ b/arch/arm64/kernel/efi-rt-wrapper.S
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+SYM_FUNC_START(__efi_rt_asm_wrapper)
+	stp	x29, x30, [sp, #-112]!
+	mov	x29, sp
+
+	/*
+	 * Register x18 is designated as the 'platform' register by the AAPCS,
+	 * which means firmware running at the same exception level as the OS
+	 * (such as UEFI) should never touch it.
+	 */
+	stp	x1, x18, [sp, #16]
+
+	/*
+	 * Preserve all callee saved registers and preserve the stack pointer
+	 * value at the base of the EFI runtime stack so we can recover from
+	 * synchronous exceptions occurring while executing the firmware
+	 * routines.
+	 */
+	stp	x19, x20, [sp, #32]
+	stp	x21, x22, [sp, #48]
+	stp	x23, x24, [sp, #64]
+	stp	x25, x26, [sp, #80]
+	stp	x27, x28, [sp, #96]
+
+	ldr_l	x16, efi_rt_stack_top
+	mov	sp, x16
+	stp	x18, x29, [sp, #-16]!
+
+	/*
+	 * We are lucky enough that no EFI runtime services take more than
+	 * 5 arguments, so all are passed in registers rather than via the
+	 * stack.
+	 */
+	mov	x8, x0
+	mov	x0, x2
+	mov	x1, x3
+	mov	x2, x4
+	mov	x3, x5
+	mov	x4, x6
+	blr	x8
+
+	mov	x16, sp
+	mov	sp, x29
+	str	xzr, [x16, #8]			// clear recorded task SP value
+
+	ldp	x1, x2, [sp, #16]
+	cmp	x2, x18
+	ldp	x29, x30, [sp], #112
+	b.ne	0f
+	ret
+0:
+	/*
+	 * With CONFIG_SHADOW_CALL_STACK, the kernel uses x18 to store a
+	 * shadow stack pointer, which we need to restore before returning to
+	 * potentially instrumented code. This is safe because the wrapper is
+	 * called with preemption disabled and a separate shadow stack is used
+	 * for interrupts.
+	 */
+#ifdef CONFIG_SHADOW_CALL_STACK
+	ldr_l	x18, efi_rt_stack_top
+	ldr	x18, [x18, #-16]
+#endif
+
+	b	efi_handle_corrupted_x18	// tail call
+SYM_FUNC_END(__efi_rt_asm_wrapper)
+
+SYM_CODE_START(__efi_rt_asm_recover)
+	mov	sp, x30
+
+	ldr_l	x16, efi_rt_stack_top		// clear recorded task SP value
+	str	xzr, [x16, #-8]
+
+	ldp	x19, x20, [sp, #32]
+	ldp	x21, x22, [sp, #48]
+	ldp	x23, x24, [sp, #64]
+	ldp	x25, x26, [sp, #80]
+	ldp	x27, x28, [sp, #96]
+	ldp	x29, x30, [sp], #112
+	ret
+SYM_CODE_END(__efi_rt_asm_recover)
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
new file mode 100644
index 000000000..2b478ca35
--- /dev/null
+++ b/arch/arm64/kernel/efi.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Extensible Firmware Interface
+ *
+ * Based on Extensible Firmware Interface Specification version 2.4
+ *
+ * Copyright (C) 2013, 2014 Linaro Ltd.
+ */
+
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/screen_info.h>
+
+#include <asm/efi.h>
+#include <asm/stacktrace.h>
+
+static bool region_is_misaligned(const efi_memory_desc_t *md)
+{
+	if (PAGE_SIZE == EFI_PAGE_SIZE)
+		return false;
+	return !PAGE_ALIGNED(md->phys_addr) ||
+	       !PAGE_ALIGNED(md->num_pages << EFI_PAGE_SHIFT);
+}
+
+/*
+ * Only regions of type EFI_RUNTIME_SERVICES_CODE need to be
+ * executable, everything else can be mapped with the XN bits
+ * set. Also take the new (optional) RO/XP bits into account.
+ */
+static __init pteval_t create_mapping_protection(efi_memory_desc_t *md)
+{
+	u64 attr = md->attribute;
+	u32 type = md->type;
+
+	if (type == EFI_MEMORY_MAPPED_IO)
+		return PROT_DEVICE_nGnRE;
+
+	if (region_is_misaligned(md)) {
+		static bool __initdata code_is_misaligned;
+
+		/*
+		 * Regions that are not aligned to the OS page size cannot be
+		 * mapped with strict permissions, as those might interfere
+		 * with the permissions that are needed by the adjacent
+		 * region's mapping. However, if we haven't encountered any
+		 * misaligned runtime code regions so far, we can safely use
+		 * non-executable permissions for non-code regions.
+		 */
+		code_is_misaligned |= (type == EFI_RUNTIME_SERVICES_CODE);
+
+		return code_is_misaligned ? pgprot_val(PAGE_KERNEL_EXEC)
+					  : pgprot_val(PAGE_KERNEL);
+	}
+
+	/* R-- */
+	if ((attr & (EFI_MEMORY_XP | EFI_MEMORY_RO)) ==
+	    (EFI_MEMORY_XP | EFI_MEMORY_RO))
+		return pgprot_val(PAGE_KERNEL_RO);
+
+	/* R-X */
+	if (attr & EFI_MEMORY_RO)
+		return pgprot_val(PAGE_KERNEL_ROX);
+
+	/* RW- */
+	if (((attr & (EFI_MEMORY_RP | EFI_MEMORY_WP | EFI_MEMORY_XP)) ==
+	     EFI_MEMORY_XP) ||
+	    type != EFI_RUNTIME_SERVICES_CODE)
+		return pgprot_val(PAGE_KERNEL);
+
+	/* RWX */
+	return pgprot_val(PAGE_KERNEL_EXEC);
+}
+
+/* we will fill this structure from the stub, so don't put it in .bss */
+struct screen_info screen_info __section(".data");
+EXPORT_SYMBOL(screen_info);
+
+int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
+{
+	pteval_t prot_val = create_mapping_protection(md);
+	bool page_mappings_only = (md->type == EFI_RUNTIME_SERVICES_CODE ||
+				   md->type == EFI_RUNTIME_SERVICES_DATA);
+
+	/*
+	 * If this region is not aligned to the page size used by the OS, the
+	 * mapping will be rounded outwards, and may end up sharing a page
+	 * frame with an adjacent runtime memory region. Given that the page
+	 * table descriptor covering the shared page will be rewritten when the
+	 * adjacent region gets mapped, we must avoid block mappings here so we
+	 * don't have to worry about splitting them when that happens.
+	 */
+	if (region_is_misaligned(md))
+		page_mappings_only = true;
+
+	create_pgd_mapping(mm, md->phys_addr, md->virt_addr,
+			   md->num_pages << EFI_PAGE_SHIFT,
+			   __pgprot(prot_val | PTE_NG), page_mappings_only);
+	return 0;
+}
+
+struct set_perm_data {
+	const efi_memory_desc_t	*md;
+	bool			has_bti;
+};
+
+static int __init set_permissions(pte_t *ptep, unsigned long addr, void *data)
+{
+	struct set_perm_data *spd = data;
+	const efi_memory_desc_t *md = spd->md;
+	pte_t pte = READ_ONCE(*ptep);
+
+	if (md->attribute & EFI_MEMORY_RO)
+		pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
+	if (md->attribute & EFI_MEMORY_XP)
+		pte = set_pte_bit(pte, __pgprot(PTE_PXN));
+	else if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) &&
+		 system_supports_bti() && spd->has_bti)
+		pte = set_pte_bit(pte, __pgprot(PTE_GP));
+	set_pte(ptep, pte);
+	return 0;
+}
+
+int __init efi_set_mapping_permissions(struct mm_struct *mm,
+				       efi_memory_desc_t *md,
+				       bool has_bti)
+{
+	struct set_perm_data data = { md, has_bti };
+
+	BUG_ON(md->type != EFI_RUNTIME_SERVICES_CODE &&
+	       md->type != EFI_RUNTIME_SERVICES_DATA);
+
+	if (region_is_misaligned(md))
+		return 0;
+
+	/*
+	 * Calling apply_to_page_range() is only safe on regions that are
+	 * guaranteed to be mapped down to pages. Since we are only called
+	 * for regions that have been mapped using efi_create_mapping() above
+	 * (and this is checked by the generic Memory Attributes table parsing
+	 * routines), there is no need to check that again here.
+	 */
+	return apply_to_page_range(mm, md->virt_addr,
+				   md->num_pages << EFI_PAGE_SHIFT,
+				   set_permissions, &data);
+}
+
+/*
+ * UpdateCapsule() depends on the system being shutdown via
+ * ResetSystem().
+ */
+bool efi_poweroff_required(void)
+{
+	return efi_enabled(EFI_RUNTIME_SERVICES);
+}
+
+asmlinkage efi_status_t efi_handle_corrupted_x18(efi_status_t s, const char *f)
+{
+	pr_err_ratelimited(FW_BUG "register x18 corrupted by EFI %s\n", f);
+	return s;
+}
+
+static DEFINE_RAW_SPINLOCK(efi_rt_lock);
+
+void arch_efi_call_virt_setup(void)
+{
+	efi_virtmap_load();
+	__efi_fpsimd_begin();
+	raw_spin_lock(&efi_rt_lock);
+}
+
+void arch_efi_call_virt_teardown(void)
+{
+	raw_spin_unlock(&efi_rt_lock);
+	__efi_fpsimd_end();
+	efi_virtmap_unload();
+}
+
+asmlinkage u64 *efi_rt_stack_top __ro_after_init;
+
+asmlinkage efi_status_t __efi_rt_asm_recover(void);
+
+bool efi_runtime_fixup_exception(struct pt_regs *regs, const char *msg)
+{
+	 /* Check whether the exception occurred while running the firmware */
+	if (!current_in_efi() || regs->pc >= TASK_SIZE_64)
+		return false;
+
+	pr_err(FW_BUG "Unable to handle %s in EFI runtime service\n", msg);
+	add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+	clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+
+	regs->regs[0]	= EFI_ABORTED;
+	regs->regs[30]	= efi_rt_stack_top[-1];
+	regs->pc	= (u64)__efi_rt_asm_recover;
+
+	if (IS_ENABLED(CONFIG_SHADOW_CALL_STACK))
+		regs->regs[18] = efi_rt_stack_top[-2];
+
+	return true;
+}
+
+/* EFI requires 8 KiB of stack space for runtime services */
+static_assert(THREAD_SIZE >= SZ_8K);
+
+static int __init arm64_efi_rt_init(void)
+{
+	void *p;
+
+	if (!efi_enabled(EFI_RUNTIME_SERVICES))
+		return 0;
+
+	p = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN, GFP_KERNEL,
+			   NUMA_NO_NODE, &&l);
+l:	if (!p) {
+		pr_warn("Failed to allocate EFI runtime stack\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return -ENOMEM;
+	}
+
+	efi_rt_stack_top = p + THREAD_SIZE;
+	return 0;
+}
+core_initcall(arm64_efi_rt_init);
diff --git a/arch/arm64/kernel/elfcore.c b/arch/arm64/kernel/elfcore.c
new file mode 100644
index 000000000..2e94d20c4
--- /dev/null
+++ b/arch/arm64/kernel/elfcore.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/coredump.h>
+#include <linux/elfcore.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/cpufeature.h>
+#include <asm/mte.h>
+
+#define for_each_mte_vma(cprm, i, m)					\
+	if (system_supports_mte())					\
+		for (i = 0, m = cprm->vma_meta;				\
+		     i < cprm->vma_count;				\
+		     i++, m = cprm->vma_meta + i)			\
+			if (m->flags & VM_MTE)
+
+static unsigned long mte_vma_tag_dump_size(struct core_vma_metadata *m)
+{
+	return (m->dump_size >> PAGE_SHIFT) * MTE_PAGE_TAG_STORAGE;
+}
+
+/* Derived from dump_user_range(); start/end must be page-aligned */
+static int mte_dump_tag_range(struct coredump_params *cprm,
+			      unsigned long start, unsigned long len)
+{
+	int ret = 1;
+	unsigned long addr;
+	void *tags = NULL;
+
+	for (addr = start; addr < start + len; addr += PAGE_SIZE) {
+		struct page *page = get_dump_page(addr);
+
+		/*
+		 * get_dump_page() returns NULL when encountering an empty
+		 * page table entry that would otherwise have been filled with
+		 * the zero page. Skip the equivalent tag dump which would
+		 * have been all zeros.
+		 */
+		if (!page) {
+			dump_skip(cprm, MTE_PAGE_TAG_STORAGE);
+			continue;
+		}
+
+		/*
+		 * Pages mapped in user space as !pte_access_permitted() (e.g.
+		 * PROT_EXEC only) may not have the PG_mte_tagged flag set.
+		 */
+		if (!page_mte_tagged(page)) {
+			put_page(page);
+			dump_skip(cprm, MTE_PAGE_TAG_STORAGE);
+			continue;
+		}
+
+		if (!tags) {
+			tags = mte_allocate_tag_storage();
+			if (!tags) {
+				put_page(page);
+				ret = 0;
+				break;
+			}
+		}
+
+		mte_save_page_tags(page_address(page), tags);
+		put_page(page);
+		if (!dump_emit(cprm, tags, MTE_PAGE_TAG_STORAGE)) {
+			ret = 0;
+			break;
+		}
+	}
+
+	if (tags)
+		mte_free_tag_storage(tags);
+
+	return ret;
+}
+
+Elf_Half elf_core_extra_phdrs(struct coredump_params *cprm)
+{
+	int i;
+	struct core_vma_metadata *m;
+	int vma_count = 0;
+
+	for_each_mte_vma(cprm, i, m)
+		vma_count++;
+
+	return vma_count;
+}
+
+int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
+{
+	int i;
+	struct core_vma_metadata *m;
+
+	for_each_mte_vma(cprm, i, m) {
+		struct elf_phdr phdr;
+
+		phdr.p_type = PT_AARCH64_MEMTAG_MTE;
+		phdr.p_offset = offset;
+		phdr.p_vaddr = m->start;
+		phdr.p_paddr = 0;
+		phdr.p_filesz = mte_vma_tag_dump_size(m);
+		phdr.p_memsz = m->end - m->start;
+		offset += phdr.p_filesz;
+		phdr.p_flags = 0;
+		phdr.p_align = 0;
+
+		if (!dump_emit(cprm, &phdr, sizeof(phdr)))
+			return 0;
+	}
+
+	return 1;
+}
+
+size_t elf_core_extra_data_size(struct coredump_params *cprm)
+{
+	int i;
+	struct core_vma_metadata *m;
+	size_t data_size = 0;
+
+	for_each_mte_vma(cprm, i, m)
+		data_size += mte_vma_tag_dump_size(m);
+
+	return data_size;
+}
+
+int elf_core_write_extra_data(struct coredump_params *cprm)
+{
+	int i;
+	struct core_vma_metadata *m;
+
+	for_each_mte_vma(cprm, i, m) {
+		if (!mte_dump_tag_range(cprm, m->start, m->dump_size))
+			return 0;
+	}
+
+	return 1;
+}
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
new file mode 100644
index 000000000..0fc94207e
--- /dev/null
+++ b/arch/arm64/kernel/entry-common.c
@@ -0,0 +1,932 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Exception handling code
+ *
+ * Copyright (C) 2019 ARM Ltd.
+ */
+
+#include <linux/context_tracking.h>
+#include <linux/kasan.h>
+#include <linux/linkage.h>
+#include <linux/lockdep.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/thread_info.h>
+
+#include <asm/cpufeature.h>
+#include <asm/daifflags.h>
+#include <asm/esr.h>
+#include <asm/exception.h>
+#include <asm/irq_regs.h>
+#include <asm/kprobes.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/sdei.h>
+#include <asm/stacktrace.h>
+#include <asm/sysreg.h>
+#include <asm/system_misc.h>
+
+/*
+ * Handle IRQ/context state management when entering from kernel mode.
+ * Before this function is called it is not safe to call regular kernel code,
+ * instrumentable code, or any code which may trigger an exception.
+ *
+ * This is intended to match the logic in irqentry_enter(), handling the kernel
+ * mode transitions only.
+ */
+static __always_inline void __enter_from_kernel_mode(struct pt_regs *regs)
+{
+	regs->exit_rcu = false;
+
+	if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
+		lockdep_hardirqs_off(CALLER_ADDR0);
+		ct_irq_enter();
+		trace_hardirqs_off_finish();
+
+		regs->exit_rcu = true;
+		return;
+	}
+
+	lockdep_hardirqs_off(CALLER_ADDR0);
+	rcu_irq_enter_check_tick();
+	trace_hardirqs_off_finish();
+}
+
+static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
+{
+	__enter_from_kernel_mode(regs);
+	mte_check_tfsr_entry();
+	mte_disable_tco_entry(current);
+}
+
+/*
+ * Handle IRQ/context state management when exiting to kernel mode.
+ * After this function returns it is not safe to call regular kernel code,
+ * instrumentable code, or any code which may trigger an exception.
+ *
+ * This is intended to match the logic in irqentry_exit(), handling the kernel
+ * mode transitions only, and with preemption handled elsewhere.
+ */
+static __always_inline void __exit_to_kernel_mode(struct pt_regs *regs)
+{
+	lockdep_assert_irqs_disabled();
+
+	if (interrupts_enabled(regs)) {
+		if (regs->exit_rcu) {
+			trace_hardirqs_on_prepare();
+			lockdep_hardirqs_on_prepare();
+			ct_irq_exit();
+			lockdep_hardirqs_on(CALLER_ADDR0);
+			return;
+		}
+
+		trace_hardirqs_on();
+	} else {
+		if (regs->exit_rcu)
+			ct_irq_exit();
+	}
+}
+
+static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
+{
+	mte_check_tfsr_exit();
+	__exit_to_kernel_mode(regs);
+}
+
+/*
+ * Handle IRQ/context state management when entering from user mode.
+ * Before this function is called it is not safe to call regular kernel code,
+ * instrumentable code, or any code which may trigger an exception.
+ */
+static __always_inline void __enter_from_user_mode(void)
+{
+	lockdep_hardirqs_off(CALLER_ADDR0);
+	CT_WARN_ON(ct_state() != CONTEXT_USER);
+	user_exit_irqoff();
+	trace_hardirqs_off_finish();
+	mte_disable_tco_entry(current);
+}
+
+static __always_inline void enter_from_user_mode(struct pt_regs *regs)
+{
+	__enter_from_user_mode();
+}
+
+/*
+ * Handle IRQ/context state management when exiting to user mode.
+ * After this function returns it is not safe to call regular kernel code,
+ * instrumentable code, or any code which may trigger an exception.
+ */
+static __always_inline void __exit_to_user_mode(void)
+{
+	trace_hardirqs_on_prepare();
+	lockdep_hardirqs_on_prepare();
+	user_enter_irqoff();
+	lockdep_hardirqs_on(CALLER_ADDR0);
+}
+
+static __always_inline void exit_to_user_mode_prepare(struct pt_regs *regs)
+{
+	unsigned long flags;
+
+	local_daif_mask();
+
+	flags = read_thread_flags();
+	if (unlikely(flags & _TIF_WORK_MASK))
+		do_notify_resume(regs, flags);
+
+	lockdep_sys_exit();
+}
+
+static __always_inline void exit_to_user_mode(struct pt_regs *regs)
+{
+	exit_to_user_mode_prepare(regs);
+	mte_check_tfsr_exit();
+	__exit_to_user_mode();
+}
+
+asmlinkage void noinstr asm_exit_to_user_mode(struct pt_regs *regs)
+{
+	exit_to_user_mode(regs);
+}
+
+/*
+ * Handle IRQ/context state management when entering an NMI from user/kernel
+ * mode. Before this function is called it is not safe to call regular kernel
+ * code, instrumentable code, or any code which may trigger an exception.
+ */
+static void noinstr arm64_enter_nmi(struct pt_regs *regs)
+{
+	regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
+
+	__nmi_enter();
+	lockdep_hardirqs_off(CALLER_ADDR0);
+	lockdep_hardirq_enter();
+	ct_nmi_enter();
+
+	trace_hardirqs_off_finish();
+	ftrace_nmi_enter();
+}
+
+/*
+ * Handle IRQ/context state management when exiting an NMI from user/kernel
+ * mode. After this function returns it is not safe to call regular kernel
+ * code, instrumentable code, or any code which may trigger an exception.
+ */
+static void noinstr arm64_exit_nmi(struct pt_regs *regs)
+{
+	bool restore = regs->lockdep_hardirqs;
+
+	ftrace_nmi_exit();
+	if (restore) {
+		trace_hardirqs_on_prepare();
+		lockdep_hardirqs_on_prepare();
+	}
+
+	ct_nmi_exit();
+	lockdep_hardirq_exit();
+	if (restore)
+		lockdep_hardirqs_on(CALLER_ADDR0);
+	__nmi_exit();
+}
+
+/*
+ * Handle IRQ/context state management when entering a debug exception from
+ * kernel mode. Before this function is called it is not safe to call regular
+ * kernel code, instrumentable code, or any code which may trigger an exception.
+ */
+static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
+{
+	regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
+
+	lockdep_hardirqs_off(CALLER_ADDR0);
+	ct_nmi_enter();
+
+	trace_hardirqs_off_finish();
+}
+
+/*
+ * Handle IRQ/context state management when exiting a debug exception from
+ * kernel mode. After this function returns it is not safe to call regular
+ * kernel code, instrumentable code, or any code which may trigger an exception.
+ */
+static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
+{
+	bool restore = regs->lockdep_hardirqs;
+
+	if (restore) {
+		trace_hardirqs_on_prepare();
+		lockdep_hardirqs_on_prepare();
+	}
+
+	ct_nmi_exit();
+	if (restore)
+		lockdep_hardirqs_on(CALLER_ADDR0);
+}
+
+#ifdef CONFIG_PREEMPT_DYNAMIC
+DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+#define need_irq_preemption() \
+	(static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
+#else
+#define need_irq_preemption()	(IS_ENABLED(CONFIG_PREEMPTION))
+#endif
+
+static void __sched arm64_preempt_schedule_irq(void)
+{
+	if (!need_irq_preemption())
+		return;
+
+	/*
+	 * Note: thread_info::preempt_count includes both thread_info::count
+	 * and thread_info::need_resched, and is not equivalent to
+	 * preempt_count().
+	 */
+	if (READ_ONCE(current_thread_info()->preempt_count) != 0)
+		return;
+
+	/*
+	 * DAIF.DA are cleared at the start of IRQ/FIQ handling, and when GIC
+	 * priority masking is used the GIC irqchip driver will clear DAIF.IF
+	 * using gic_arch_enable_irqs() for normal IRQs. If anything is set in
+	 * DAIF we must have handled an NMI, so skip preemption.
+	 */
+	if (system_uses_irq_prio_masking() && read_sysreg(daif))
+		return;
+
+	/*
+	 * Preempting a task from an IRQ means we leave copies of PSTATE
+	 * on the stack. cpufeature's enable calls may modify PSTATE, but
+	 * resuming one of these preempted tasks would undo those changes.
+	 *
+	 * Only allow a task to be preempted once cpufeatures have been
+	 * enabled.
+	 */
+	if (system_capabilities_finalized())
+		preempt_schedule_irq();
+}
+
+static void do_interrupt_handler(struct pt_regs *regs,
+				 void (*handler)(struct pt_regs *))
+{
+	struct pt_regs *old_regs = set_irq_regs(regs);
+
+	if (on_thread_stack())
+		call_on_irq_stack(regs, handler);
+	else
+		handler(regs);
+
+	set_irq_regs(old_regs);
+}
+
+extern void (*handle_arch_irq)(struct pt_regs *);
+extern void (*handle_arch_fiq)(struct pt_regs *);
+
+static void noinstr __panic_unhandled(struct pt_regs *regs, const char *vector,
+				      unsigned long esr)
+{
+	arm64_enter_nmi(regs);
+
+	console_verbose();
+
+	pr_crit("Unhandled %s exception on CPU%d, ESR 0x%016lx -- %s\n",
+		vector, smp_processor_id(), esr,
+		esr_get_class_string(esr));
+
+	__show_regs(regs);
+	panic("Unhandled exception");
+}
+
+#define UNHANDLED(el, regsize, vector)							\
+asmlinkage void noinstr el##_##regsize##_##vector##_handler(struct pt_regs *regs)	\
+{											\
+	const char *desc = #regsize "-bit " #el " " #vector;				\
+	__panic_unhandled(regs, desc, read_sysreg(esr_el1));				\
+}
+
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+static DEFINE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa);
+
+static void cortex_a76_erratum_1463225_svc_handler(void)
+{
+	u32 reg, val;
+
+	if (!unlikely(test_thread_flag(TIF_SINGLESTEP)))
+		return;
+
+	if (!unlikely(this_cpu_has_cap(ARM64_WORKAROUND_1463225)))
+		return;
+
+	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 1);
+	reg = read_sysreg(mdscr_el1);
+	val = reg | DBG_MDSCR_SS | DBG_MDSCR_KDE;
+	write_sysreg(val, mdscr_el1);
+	asm volatile("msr daifclr, #8");
+	isb();
+
+	/* We will have taken a single-step exception by this point */
+
+	write_sysreg(reg, mdscr_el1);
+	__this_cpu_write(__in_cortex_a76_erratum_1463225_wa, 0);
+}
+
+static __always_inline bool
+cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
+{
+	if (!__this_cpu_read(__in_cortex_a76_erratum_1463225_wa))
+		return false;
+
+	/*
+	 * We've taken a dummy step exception from the kernel to ensure
+	 * that interrupts are re-enabled on the syscall path. Return back
+	 * to cortex_a76_erratum_1463225_svc_handler() with debug exceptions
+	 * masked so that we can safely restore the mdscr and get on with
+	 * handling the syscall.
+	 */
+	regs->pstate |= PSR_D_BIT;
+	return true;
+}
+#else /* CONFIG_ARM64_ERRATUM_1463225 */
+static void cortex_a76_erratum_1463225_svc_handler(void) { }
+static bool cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs)
+{
+	return false;
+}
+#endif /* CONFIG_ARM64_ERRATUM_1463225 */
+
+/*
+ * As per the ABI exit SME streaming mode and clear the SVE state not
+ * shared with FPSIMD on syscall entry.
+ */
+static inline void fp_user_discard(void)
+{
+	/*
+	 * If SME is active then exit streaming mode.  If ZA is active
+	 * then flush the SVE registers but leave userspace access to
+	 * both SVE and SME enabled, otherwise disable SME for the
+	 * task and fall through to disabling SVE too.  This means
+	 * that after a syscall we never have any streaming mode
+	 * register state to track, if this changes the KVM code will
+	 * need updating.
+	 */
+	if (system_supports_sme())
+		sme_smstop_sm();
+
+	if (!system_supports_sve())
+		return;
+
+	if (test_thread_flag(TIF_SVE)) {
+		unsigned int sve_vq_minus_one;
+
+		sve_vq_minus_one = sve_vq_from_vl(task_get_sve_vl(current)) - 1;
+		sve_flush_live(true, sve_vq_minus_one);
+	}
+}
+
+UNHANDLED(el1t, 64, sync)
+UNHANDLED(el1t, 64, irq)
+UNHANDLED(el1t, 64, fiq)
+UNHANDLED(el1t, 64, error)
+
+static void noinstr el1_abort(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long far = read_sysreg(far_el1);
+
+	enter_from_kernel_mode(regs);
+	local_daif_inherit(regs);
+	do_mem_abort(far, esr, regs);
+	local_daif_mask();
+	exit_to_kernel_mode(regs);
+}
+
+static void noinstr el1_pc(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long far = read_sysreg(far_el1);
+
+	enter_from_kernel_mode(regs);
+	local_daif_inherit(regs);
+	do_sp_pc_abort(far, esr, regs);
+	local_daif_mask();
+	exit_to_kernel_mode(regs);
+}
+
+static void noinstr el1_undef(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_kernel_mode(regs);
+	local_daif_inherit(regs);
+	do_el1_undef(regs, esr);
+	local_daif_mask();
+	exit_to_kernel_mode(regs);
+}
+
+static void noinstr el1_bti(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_kernel_mode(regs);
+	local_daif_inherit(regs);
+	do_el1_bti(regs, esr);
+	local_daif_mask();
+	exit_to_kernel_mode(regs);
+}
+
+static void noinstr el1_dbg(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long far = read_sysreg(far_el1);
+
+	arm64_enter_el1_dbg(regs);
+	if (!cortex_a76_erratum_1463225_debug_handler(regs))
+		do_debug_exception(far, esr, regs);
+	arm64_exit_el1_dbg(regs);
+}
+
+static void noinstr el1_fpac(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_kernel_mode(regs);
+	local_daif_inherit(regs);
+	do_el1_fpac(regs, esr);
+	local_daif_mask();
+	exit_to_kernel_mode(regs);
+}
+
+asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
+{
+	unsigned long esr = read_sysreg(esr_el1);
+
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_DABT_CUR:
+	case ESR_ELx_EC_IABT_CUR:
+		el1_abort(regs, esr);
+		break;
+	/*
+	 * We don't handle ESR_ELx_EC_SP_ALIGN, since we will have hit a
+	 * recursive exception when trying to push the initial pt_regs.
+	 */
+	case ESR_ELx_EC_PC_ALIGN:
+		el1_pc(regs, esr);
+		break;
+	case ESR_ELx_EC_SYS64:
+	case ESR_ELx_EC_UNKNOWN:
+		el1_undef(regs, esr);
+		break;
+	case ESR_ELx_EC_BTI:
+		el1_bti(regs, esr);
+		break;
+	case ESR_ELx_EC_BREAKPT_CUR:
+	case ESR_ELx_EC_SOFTSTP_CUR:
+	case ESR_ELx_EC_WATCHPT_CUR:
+	case ESR_ELx_EC_BRK64:
+		el1_dbg(regs, esr);
+		break;
+	case ESR_ELx_EC_FPAC:
+		el1_fpac(regs, esr);
+		break;
+	default:
+		__panic_unhandled(regs, "64-bit el1h sync", esr);
+	}
+}
+
+static __always_inline void __el1_pnmi(struct pt_regs *regs,
+				       void (*handler)(struct pt_regs *))
+{
+	arm64_enter_nmi(regs);
+	do_interrupt_handler(regs, handler);
+	arm64_exit_nmi(regs);
+}
+
+static __always_inline void __el1_irq(struct pt_regs *regs,
+				      void (*handler)(struct pt_regs *))
+{
+	enter_from_kernel_mode(regs);
+
+	irq_enter_rcu();
+	do_interrupt_handler(regs, handler);
+	irq_exit_rcu();
+
+	arm64_preempt_schedule_irq();
+
+	exit_to_kernel_mode(regs);
+}
+static void noinstr el1_interrupt(struct pt_regs *regs,
+				  void (*handler)(struct pt_regs *))
+{
+	write_sysreg(DAIF_PROCCTX_NOIRQ, daif);
+
+	if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && !interrupts_enabled(regs))
+		__el1_pnmi(regs, handler);
+	else
+		__el1_irq(regs, handler);
+}
+
+asmlinkage void noinstr el1h_64_irq_handler(struct pt_regs *regs)
+{
+	el1_interrupt(regs, handle_arch_irq);
+}
+
+asmlinkage void noinstr el1h_64_fiq_handler(struct pt_regs *regs)
+{
+	el1_interrupt(regs, handle_arch_fiq);
+}
+
+asmlinkage void noinstr el1h_64_error_handler(struct pt_regs *regs)
+{
+	unsigned long esr = read_sysreg(esr_el1);
+
+	local_daif_restore(DAIF_ERRCTX);
+	arm64_enter_nmi(regs);
+	do_serror(regs, esr);
+	arm64_exit_nmi(regs);
+}
+
+static void noinstr el0_da(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long far = read_sysreg(far_el1);
+
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_mem_abort(far, esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long far = read_sysreg(far_el1);
+
+	/*
+	 * We've taken an instruction abort from userspace and not yet
+	 * re-enabled IRQs. If the address is a kernel address, apply
+	 * BP hardening prior to enabling IRQs and pre-emption.
+	 */
+	if (!is_ttbr0_addr(far))
+		arm64_apply_bp_hardening();
+
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_mem_abort(far, esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_fpsimd_acc(esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_sve_acc(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_sve_acc(esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_sme_acc(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_sme_acc(esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_fpsimd_exc(esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_sys(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_sys(esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long far = read_sysreg(far_el1);
+
+	if (!is_ttbr0_addr(instruction_pointer(regs)))
+		arm64_apply_bp_hardening();
+
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_sp_pc_abort(far, esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_sp(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_sp_pc_abort(regs->sp, esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_undef(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_undef(regs, esr);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_bti(struct pt_regs *regs)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_bti(regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_mops(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_mops(regs, esr);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	bad_el0_sync(regs, 0, esr);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr)
+{
+	/* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */
+	unsigned long far = read_sysreg(far_el1);
+
+	enter_from_user_mode(regs);
+	do_debug_exception(far, esr, regs);
+	local_daif_restore(DAIF_PROCCTX);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_svc(struct pt_regs *regs)
+{
+	enter_from_user_mode(regs);
+	cortex_a76_erratum_1463225_svc_handler();
+	fp_user_discard();
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_svc(regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_fpac(regs, esr);
+	exit_to_user_mode(regs);
+}
+
+asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
+{
+	unsigned long esr = read_sysreg(esr_el1);
+
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_SVC64:
+		el0_svc(regs);
+		break;
+	case ESR_ELx_EC_DABT_LOW:
+		el0_da(regs, esr);
+		break;
+	case ESR_ELx_EC_IABT_LOW:
+		el0_ia(regs, esr);
+		break;
+	case ESR_ELx_EC_FP_ASIMD:
+		el0_fpsimd_acc(regs, esr);
+		break;
+	case ESR_ELx_EC_SVE:
+		el0_sve_acc(regs, esr);
+		break;
+	case ESR_ELx_EC_SME:
+		el0_sme_acc(regs, esr);
+		break;
+	case ESR_ELx_EC_FP_EXC64:
+		el0_fpsimd_exc(regs, esr);
+		break;
+	case ESR_ELx_EC_SYS64:
+	case ESR_ELx_EC_WFx:
+		el0_sys(regs, esr);
+		break;
+	case ESR_ELx_EC_SP_ALIGN:
+		el0_sp(regs, esr);
+		break;
+	case ESR_ELx_EC_PC_ALIGN:
+		el0_pc(regs, esr);
+		break;
+	case ESR_ELx_EC_UNKNOWN:
+		el0_undef(regs, esr);
+		break;
+	case ESR_ELx_EC_BTI:
+		el0_bti(regs);
+		break;
+	case ESR_ELx_EC_MOPS:
+		el0_mops(regs, esr);
+		break;
+	case ESR_ELx_EC_BREAKPT_LOW:
+	case ESR_ELx_EC_SOFTSTP_LOW:
+	case ESR_ELx_EC_WATCHPT_LOW:
+	case ESR_ELx_EC_BRK64:
+		el0_dbg(regs, esr);
+		break;
+	case ESR_ELx_EC_FPAC:
+		el0_fpac(regs, esr);
+		break;
+	default:
+		el0_inv(regs, esr);
+	}
+}
+
+static void noinstr el0_interrupt(struct pt_regs *regs,
+				  void (*handler)(struct pt_regs *))
+{
+	enter_from_user_mode(regs);
+
+	write_sysreg(DAIF_PROCCTX_NOIRQ, daif);
+
+	if (regs->pc & BIT(55))
+		arm64_apply_bp_hardening();
+
+	irq_enter_rcu();
+	do_interrupt_handler(regs, handler);
+	irq_exit_rcu();
+
+	exit_to_user_mode(regs);
+}
+
+static void noinstr __el0_irq_handler_common(struct pt_regs *regs)
+{
+	el0_interrupt(regs, handle_arch_irq);
+}
+
+asmlinkage void noinstr el0t_64_irq_handler(struct pt_regs *regs)
+{
+	__el0_irq_handler_common(regs);
+}
+
+static void noinstr __el0_fiq_handler_common(struct pt_regs *regs)
+{
+	el0_interrupt(regs, handle_arch_fiq);
+}
+
+asmlinkage void noinstr el0t_64_fiq_handler(struct pt_regs *regs)
+{
+	__el0_fiq_handler_common(regs);
+}
+
+static void noinstr __el0_error_handler_common(struct pt_regs *regs)
+{
+	unsigned long esr = read_sysreg(esr_el1);
+
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_ERRCTX);
+	arm64_enter_nmi(regs);
+	do_serror(regs, esr);
+	arm64_exit_nmi(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	exit_to_user_mode(regs);
+}
+
+asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs)
+{
+	__el0_error_handler_common(regs);
+}
+
+#ifdef CONFIG_COMPAT
+static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
+{
+	enter_from_user_mode(regs);
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_cp15(esr, regs);
+	exit_to_user_mode(regs);
+}
+
+static void noinstr el0_svc_compat(struct pt_regs *regs)
+{
+	enter_from_user_mode(regs);
+	cortex_a76_erratum_1463225_svc_handler();
+	local_daif_restore(DAIF_PROCCTX);
+	do_el0_svc_compat(regs);
+	exit_to_user_mode(regs);
+}
+
+asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs)
+{
+	unsigned long esr = read_sysreg(esr_el1);
+
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_SVC32:
+		el0_svc_compat(regs);
+		break;
+	case ESR_ELx_EC_DABT_LOW:
+		el0_da(regs, esr);
+		break;
+	case ESR_ELx_EC_IABT_LOW:
+		el0_ia(regs, esr);
+		break;
+	case ESR_ELx_EC_FP_ASIMD:
+		el0_fpsimd_acc(regs, esr);
+		break;
+	case ESR_ELx_EC_FP_EXC32:
+		el0_fpsimd_exc(regs, esr);
+		break;
+	case ESR_ELx_EC_PC_ALIGN:
+		el0_pc(regs, esr);
+		break;
+	case ESR_ELx_EC_UNKNOWN:
+	case ESR_ELx_EC_CP14_MR:
+	case ESR_ELx_EC_CP14_LS:
+	case ESR_ELx_EC_CP14_64:
+		el0_undef(regs, esr);
+		break;
+	case ESR_ELx_EC_CP15_32:
+	case ESR_ELx_EC_CP15_64:
+		el0_cp15(regs, esr);
+		break;
+	case ESR_ELx_EC_BREAKPT_LOW:
+	case ESR_ELx_EC_SOFTSTP_LOW:
+	case ESR_ELx_EC_WATCHPT_LOW:
+	case ESR_ELx_EC_BKPT32:
+		el0_dbg(regs, esr);
+		break;
+	default:
+		el0_inv(regs, esr);
+	}
+}
+
+asmlinkage void noinstr el0t_32_irq_handler(struct pt_regs *regs)
+{
+	__el0_irq_handler_common(regs);
+}
+
+asmlinkage void noinstr el0t_32_fiq_handler(struct pt_regs *regs)
+{
+	__el0_fiq_handler_common(regs);
+}
+
+asmlinkage void noinstr el0t_32_error_handler(struct pt_regs *regs)
+{
+	__el0_error_handler_common(regs);
+}
+#else /* CONFIG_COMPAT */
+UNHANDLED(el0t, 32, sync)
+UNHANDLED(el0t, 32, irq)
+UNHANDLED(el0t, 32, fiq)
+UNHANDLED(el0t, 32, error)
+#endif /* CONFIG_COMPAT */
+
+#ifdef CONFIG_VMAP_STACK
+asmlinkage void noinstr __noreturn handle_bad_stack(struct pt_regs *regs)
+{
+	unsigned long esr = read_sysreg(esr_el1);
+	unsigned long far = read_sysreg(far_el1);
+
+	arm64_enter_nmi(regs);
+	panic_bad_stack(regs, esr, far);
+}
+#endif /* CONFIG_VMAP_STACK */
+
+#ifdef CONFIG_ARM_SDE_INTERFACE
+asmlinkage noinstr unsigned long
+__sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg)
+{
+	unsigned long ret;
+
+	/*
+	 * We didn't take an exception to get here, so the HW hasn't
+	 * set/cleared bits in PSTATE that we may rely on.
+	 *
+	 * The original SDEI spec (ARM DEN 0054A) can be read ambiguously as to
+	 * whether PSTATE bits are inherited unchanged or generated from
+	 * scratch, and the TF-A implementation always clears PAN and always
+	 * clears UAO. There are no other known implementations.
+	 *
+	 * Subsequent revisions (ARM DEN 0054B) follow the usual rules for how
+	 * PSTATE is modified upon architectural exceptions, and so PAN is
+	 * either inherited or set per SCTLR_ELx.SPAN, and UAO is always
+	 * cleared.
+	 *
+	 * We must explicitly reset PAN to the expected state, including
+	 * clearing it when the host isn't using it, in case a VM had it set.
+	 */
+	if (system_uses_hw_pan())
+		set_pstate_pan(1);
+	else if (cpu_has_pan())
+		set_pstate_pan(0);
+
+	arm64_enter_nmi(regs);
+	ret = do_sdei_event(regs, arg);
+	arm64_exit_nmi(regs);
+
+	return ret;
+}
+#endif /* CONFIG_ARM_SDE_INTERFACE */
diff --git a/arch/arm64/kernel/entry-fpsimd.S b/arch/arm64/kernel/entry-fpsimd.S
new file mode 100644
index 000000000..6325db1a2
--- /dev/null
+++ b/arch/arm64/kernel/entry-fpsimd.S
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * FP/SIMD state saving and restoring
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/fpsimdmacros.h>
+
+/*
+ * Save the FP registers.
+ *
+ * x0 - pointer to struct fpsimd_state
+ */
+SYM_FUNC_START(fpsimd_save_state)
+	fpsimd_save x0, 8
+	ret
+SYM_FUNC_END(fpsimd_save_state)
+
+/*
+ * Load the FP registers.
+ *
+ * x0 - pointer to struct fpsimd_state
+ */
+SYM_FUNC_START(fpsimd_load_state)
+	fpsimd_restore x0, 8
+	ret
+SYM_FUNC_END(fpsimd_load_state)
+
+#ifdef CONFIG_ARM64_SVE
+
+/*
+ * Save the SVE state
+ *
+ * x0 - pointer to buffer for state
+ * x1 - pointer to storage for FPSR
+ * x2 - Save FFR if non-zero
+ */
+SYM_FUNC_START(sve_save_state)
+	sve_save 0, x1, x2, 3
+	ret
+SYM_FUNC_END(sve_save_state)
+
+/*
+ * Load the SVE state
+ *
+ * x0 - pointer to buffer for state
+ * x1 - pointer to storage for FPSR
+ * x2 - Restore FFR if non-zero
+ */
+SYM_FUNC_START(sve_load_state)
+	sve_load 0, x1, x2, 4
+	ret
+SYM_FUNC_END(sve_load_state)
+
+SYM_FUNC_START(sve_get_vl)
+	_sve_rdvl	0, 1
+	ret
+SYM_FUNC_END(sve_get_vl)
+
+SYM_FUNC_START(sve_set_vq)
+	sve_load_vq x0, x1, x2
+	ret
+SYM_FUNC_END(sve_set_vq)
+
+/*
+ * Zero all SVE registers but the first 128-bits of each vector
+ *
+ * VQ must already be configured by caller, any further updates of VQ
+ * will need to ensure that the register state remains valid.
+ *
+ * x0 = include FFR?
+ * x1 = VQ - 1
+ */
+SYM_FUNC_START(sve_flush_live)
+	cbz		x1, 1f	// A VQ-1 of 0 is 128 bits so no extra Z state
+	sve_flush_z
+1:	sve_flush_p
+	tbz		x0, #0, 2f
+	sve_flush_ffr
+2:	ret
+SYM_FUNC_END(sve_flush_live)
+
+#endif /* CONFIG_ARM64_SVE */
+
+#ifdef CONFIG_ARM64_SME
+
+SYM_FUNC_START(sme_get_vl)
+	_sme_rdsvl	0, 1
+	ret
+SYM_FUNC_END(sme_get_vl)
+
+SYM_FUNC_START(sme_set_vq)
+	sme_load_vq x0, x1, x2
+	ret
+SYM_FUNC_END(sme_set_vq)
+
+/*
+ * Save the ZA and ZT state
+ *
+ * x0 - pointer to buffer for state
+ * x1 - number of ZT registers to save
+ */
+SYM_FUNC_START(sme_save_state)
+	_sme_rdsvl	2, 1		// x2 = VL/8
+	sme_save_za 0, x2, 12		// Leaves x0 pointing to the end of ZA
+
+	cbz	x1, 1f
+	_str_zt 0
+1:
+	ret
+SYM_FUNC_END(sme_save_state)
+
+/*
+ * Load the ZA and ZT state
+ *
+ * x0 - pointer to buffer for state
+ * x1 - number of ZT registers to save
+ */
+SYM_FUNC_START(sme_load_state)
+	_sme_rdsvl	2, 1		// x2 = VL/8
+	sme_load_za 0, x2, 12		// Leaves x0 pointing to the end of ZA
+
+	cbz	x1, 1f
+	_ldr_zt 0
+1:
+	ret
+SYM_FUNC_END(sme_load_state)
+
+#endif /* CONFIG_ARM64_SME */
diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S
new file mode 100644
index 000000000..f0c16640e
--- /dev/null
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -0,0 +1,353 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/kernel/entry-ftrace.S
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <linux/cfi_types.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/ftrace.h>
+#include <asm/insn.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+/*
+ * Due to -fpatchable-function-entry=2, the compiler has placed two NOPs before
+ * the regular function prologue. For an enabled callsite, ftrace_init_nop() and
+ * ftrace_make_call() have patched those NOPs to:
+ *
+ * 	MOV	X9, LR
+ * 	BL	ftrace_caller
+ *
+ * Each instrumented function follows the AAPCS, so here x0-x8 and x18-x30 are
+ * live (x18 holds the Shadow Call Stack pointer), and x9-x17 are safe to
+ * clobber.
+ *
+ * We save the callsite's context into a struct ftrace_regs before invoking any
+ * ftrace callbacks. So that we can get a sensible backtrace, we create frame
+ * records for the callsite and the ftrace entry assembly. This is not
+ * sufficient for reliable stacktrace: until we create the callsite stack
+ * record, its caller is missing from the LR and existing chain of frame
+ * records.
+ */
+SYM_CODE_START(ftrace_caller)
+	bti	c
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+	/*
+	 * The literal pointer to the ops is at an 8-byte aligned boundary
+	 * which is either 12 or 16 bytes before the BL instruction in the call
+	 * site. See ftrace_call_adjust() for details.
+	 *
+	 * Therefore here the LR points at `literal + 16` or `literal + 20`,
+	 * and we can find the address of the literal in either case by
+	 * aligning to an 8-byte boundary and subtracting 16. We do the
+	 * alignment first as this allows us to fold the subtraction into the
+	 * LDR.
+	 */
+	bic	x11, x30, 0x7
+	ldr	x11, [x11, #-(4 * AARCH64_INSN_SIZE)]		// op
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	/*
+	 * If the op has a direct call, handle it immediately without
+	 * saving/restoring registers.
+	 */
+	ldr	x17, [x11, #FTRACE_OPS_DIRECT_CALL]		// op->direct_call
+	cbnz	x17, ftrace_caller_direct
+#endif
+#endif
+
+	/* Save original SP */
+	mov	x10, sp
+
+	/* Make room for ftrace regs, plus two frame records */
+	sub	sp, sp, #(FREGS_SIZE + 32)
+
+	/* Save function arguments */
+	stp	x0, x1, [sp, #FREGS_X0]
+	stp	x2, x3, [sp, #FREGS_X2]
+	stp	x4, x5, [sp, #FREGS_X4]
+	stp	x6, x7, [sp, #FREGS_X6]
+	str	x8,     [sp, #FREGS_X8]
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	str	xzr, [sp, #FREGS_DIRECT_TRAMP]
+#endif
+
+	/* Save the callsite's FP, LR, SP */
+	str	x29, [sp, #FREGS_FP]
+	str	x9,  [sp, #FREGS_LR]
+	str	x10, [sp, #FREGS_SP]
+
+	/* Save the PC after the ftrace callsite */
+	str	x30, [sp, #FREGS_PC]
+
+	/* Create a frame record for the callsite above the ftrace regs */
+	stp	x29, x9, [sp, #FREGS_SIZE + 16]
+	add	x29, sp, #FREGS_SIZE + 16
+
+	/* Create our frame record above the ftrace regs */
+	stp	x29, x30, [sp, #FREGS_SIZE]
+	add	x29, sp, #FREGS_SIZE
+
+	/* Prepare arguments for the the tracer func */
+	sub	x0, x30, #AARCH64_INSN_SIZE		// ip (callsite's BL insn)
+	mov	x1, x9					// parent_ip (callsite's LR)
+	mov	x3, sp					// regs
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+	mov	x2, x11					// op
+	ldr	x4, [x2, #FTRACE_OPS_FUNC]		// op->func
+	blr	x4					// op->func(ip, parent_ip, op, regs)
+
+#else
+	ldr_l   x2, function_trace_op			// op
+
+SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)
+	bl      ftrace_stub				// func(ip, parent_ip, op, regs)
+#endif
+
+/*
+ * At the callsite x0-x8 and x19-x30 were live. Any C code will have preserved
+ * x19-x29 per the AAPCS, and we created frame records upon entry, so we need
+ * to restore x0-x8, x29, and x30.
+ */
+	/* Restore function arguments */
+	ldp	x0, x1, [sp, #FREGS_X0]
+	ldp	x2, x3, [sp, #FREGS_X2]
+	ldp	x4, x5, [sp, #FREGS_X4]
+	ldp	x6, x7, [sp, #FREGS_X6]
+	ldr	x8,     [sp, #FREGS_X8]
+
+	/* Restore the callsite's FP */
+	ldr	x29, [sp, #FREGS_FP]
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+	ldr	x17, [sp, #FREGS_DIRECT_TRAMP]
+	cbnz	x17, ftrace_caller_direct_late
+#endif
+
+	/* Restore the callsite's LR and PC */
+	ldr	x30, [sp, #FREGS_LR]
+	ldr	x9,  [sp, #FREGS_PC]
+
+	/* Restore the callsite's SP */
+	add	sp, sp, #FREGS_SIZE + 32
+
+	ret	x9
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_INNER_LABEL(ftrace_caller_direct_late, SYM_L_LOCAL)
+	/*
+	 * Head to a direct trampoline in x17 after having run other tracers.
+	 * The ftrace_regs are live, and x0-x8 and FP have been restored. The
+	 * LR, PC, and SP have not been restored.
+	 */
+
+	/*
+	 * Restore the callsite's LR and PC matching the trampoline calling
+	 * convention.
+	 */
+	ldr	x9,  [sp, #FREGS_LR]
+	ldr	x30, [sp, #FREGS_PC]
+
+	/* Restore the callsite's SP */
+	add	sp, sp, #FREGS_SIZE + 32
+
+SYM_INNER_LABEL(ftrace_caller_direct, SYM_L_LOCAL)
+	/*
+	 * Head to a direct trampoline in x17.
+	 *
+	 * We use `BR X17` as this can safely land on a `BTI C` or `PACIASP` in
+	 * the trampoline, and will not unbalance any return stack.
+	 */
+	br	x17
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+SYM_CODE_END(ftrace_caller)
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
+SYM_CODE_START(ftrace_stub_direct_tramp)
+	bti	c
+	mov	x10, x30
+	mov	x30, x9
+	ret	x10
+SYM_CODE_END(ftrace_stub_direct_tramp)
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS */
+
+#else /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
+
+/*
+ * Gcc with -pg will put the following code in the beginning of each function:
+ *      mov x0, x30
+ *      bl _mcount
+ *	[function's body ...]
+ * "bl _mcount" may be replaced to "bl ftrace_caller" or NOP if dynamic
+ * ftrace is enabled.
+ *
+ * Please note that x0 as an argument will not be used here because we can
+ * get lr(x30) of instrumented function at any time by winding up call stack
+ * as long as the kernel is compiled without -fomit-frame-pointer.
+ * (or CONFIG_FRAME_POINTER, this is forced on arm64)
+ *
+ * stack layout after mcount_enter in _mcount():
+ *
+ * current sp/fp =>  0:+-----+
+ * in _mcount()        | x29 | -> instrumented function's fp
+ *                     +-----+
+ *                     | x30 | -> _mcount()'s lr (= instrumented function's pc)
+ * old sp       => +16:+-----+
+ * when instrumented   |     |
+ * function calls      | ... |
+ * _mcount()           |     |
+ *                     |     |
+ * instrumented => +xx:+-----+
+ * function's fp       | x29 | -> parent's fp
+ *                     +-----+
+ *                     | x30 | -> instrumented function's lr (= parent's pc)
+ *                     +-----+
+ *                     | ... |
+ */
+
+	.macro mcount_enter
+	stp	x29, x30, [sp, #-16]!
+	mov	x29, sp
+	.endm
+
+	.macro mcount_exit
+	ldp	x29, x30, [sp], #16
+	ret
+	.endm
+
+	.macro mcount_adjust_addr rd, rn
+	sub	\rd, \rn, #AARCH64_INSN_SIZE
+	.endm
+
+	/* for instrumented function's parent */
+	.macro mcount_get_parent_fp reg
+	ldr	\reg, [x29]
+	ldr	\reg, [\reg]
+	.endm
+
+	/* for instrumented function */
+	.macro mcount_get_pc0 reg
+	mcount_adjust_addr	\reg, x30
+	.endm
+
+	.macro mcount_get_pc reg
+	ldr	\reg, [x29, #8]
+	mcount_adjust_addr	\reg, \reg
+	.endm
+
+	.macro mcount_get_lr reg
+	ldr	\reg, [x29]
+	ldr	\reg, [\reg, #8]
+	.endm
+
+	.macro mcount_get_lr_addr reg
+	ldr	\reg, [x29]
+	add	\reg, \reg, #8
+	.endm
+
+/*
+ * _mcount() is used to build the kernel with -pg option, but all the branch
+ * instructions to _mcount() are replaced to NOP initially at kernel start up,
+ * and later on, NOP to branch to ftrace_caller() when enabled or branch to
+ * NOP when disabled per-function base.
+ */
+SYM_FUNC_START(_mcount)
+	ret
+SYM_FUNC_END(_mcount)
+EXPORT_SYMBOL(_mcount)
+NOKPROBE(_mcount)
+
+/*
+ * void ftrace_caller(unsigned long return_address)
+ * @return_address: return address to instrumented function
+ *
+ * This function is a counterpart of _mcount() in 'static' ftrace, and
+ * makes calls to:
+ *     - tracer function to probe instrumented function's entry,
+ *     - ftrace_graph_caller to set up an exit hook
+ */
+SYM_FUNC_START(ftrace_caller)
+	mcount_enter
+
+	mcount_get_pc0	x0		//     function's pc
+	mcount_get_lr	x1		//     function's lr
+
+SYM_INNER_LABEL(ftrace_call, SYM_L_GLOBAL)	// tracer(pc, lr);
+	nop				// This will be replaced with "bl xxx"
+					// where xxx can be any kind of tracer.
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL) // ftrace_graph_caller();
+	nop				// If enabled, this will be replaced
+					// "b ftrace_graph_caller"
+#endif
+
+	mcount_exit
+SYM_FUNC_END(ftrace_caller)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * void ftrace_graph_caller(void)
+ *
+ * Called from _mcount() or ftrace_caller() when function_graph tracer is
+ * selected.
+ * This function w/ prepare_ftrace_return() fakes link register's value on
+ * the call stack in order to intercept instrumented function's return path
+ * and run return_to_handler() later on its exit.
+ */
+SYM_FUNC_START(ftrace_graph_caller)
+	mcount_get_pc		  x0	//     function's pc
+	mcount_get_lr_addr	  x1	//     pointer to function's saved lr
+	mcount_get_parent_fp	  x2	//     parent's fp
+	bl	prepare_ftrace_return	// prepare_ftrace_return(pc, &lr, fp)
+
+	mcount_exit
+SYM_FUNC_END(ftrace_graph_caller)
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
+
+SYM_TYPED_FUNC_START(ftrace_stub)
+	ret
+SYM_FUNC_END(ftrace_stub)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+SYM_TYPED_FUNC_START(ftrace_stub_graph)
+	ret
+SYM_FUNC_END(ftrace_stub_graph)
+
+/*
+ * void return_to_handler(void)
+ *
+ * Run ftrace_return_to_handler() before going back to parent.
+ * @fp is checked against the value passed by ftrace_graph_caller().
+ */
+SYM_CODE_START(return_to_handler)
+	/* save return value regs */
+	sub sp, sp, #FGRET_REGS_SIZE
+	stp x0, x1, [sp, #FGRET_REGS_X0]
+	stp x2, x3, [sp, #FGRET_REGS_X2]
+	stp x4, x5, [sp, #FGRET_REGS_X4]
+	stp x6, x7, [sp, #FGRET_REGS_X6]
+	str x29,    [sp, #FGRET_REGS_FP]	// parent's fp
+
+	mov	x0, sp
+	bl	ftrace_return_to_handler	// addr = ftrace_return_to_hander(regs);
+	mov	x30, x0				// restore the original return address
+
+	/* restore return value regs */
+	ldp x0, x1, [sp, #FGRET_REGS_X0]
+	ldp x2, x3, [sp, #FGRET_REGS_X2]
+	ldp x4, x5, [sp, #FGRET_REGS_X4]
+	ldp x6, x7, [sp, #FGRET_REGS_X6]
+	add sp, sp, #FGRET_REGS_SIZE
+
+	ret
+SYM_CODE_END(return_to_handler)
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
new file mode 100644
index 000000000..7fcbee0f6
--- /dev/null
+++ b/arch/arm64/kernel/entry.S
@@ -0,0 +1,1099 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Low-level exception handling code
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Authors:	Catalin Marinas <catalin.marinas@arm.com>
+ *		Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/alternative.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/asm_pointer_auth.h>
+#include <asm/bug.h>
+#include <asm/cpufeature.h>
+#include <asm/errno.h>
+#include <asm/esr.h>
+#include <asm/irq.h>
+#include <asm/memory.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/scs.h>
+#include <asm/thread_info.h>
+#include <asm/asm-uaccess.h>
+#include <asm/unistd.h>
+
+	.macro	clear_gp_regs
+	.irp	n,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29
+	mov	x\n, xzr
+	.endr
+	.endm
+
+	.macro kernel_ventry, el:req, ht:req, regsize:req, label:req
+	.align 7
+.Lventry_start\@:
+	.if	\el == 0
+	/*
+	 * This must be the first instruction of the EL0 vector entries. It is
+	 * skipped by the trampoline vectors, to trigger the cleanup.
+	 */
+	b	.Lskip_tramp_vectors_cleanup\@
+	.if	\regsize == 64
+	mrs	x30, tpidrro_el0
+	msr	tpidrro_el0, xzr
+	.else
+	mov	x30, xzr
+	.endif
+.Lskip_tramp_vectors_cleanup\@:
+	.endif
+
+	sub	sp, sp, #PT_REGS_SIZE
+#ifdef CONFIG_VMAP_STACK
+	/*
+	 * Test whether the SP has overflowed, without corrupting a GPR.
+	 * Task and IRQ stacks are aligned so that SP & (1 << THREAD_SHIFT)
+	 * should always be zero.
+	 */
+	add	sp, sp, x0			// sp' = sp + x0
+	sub	x0, sp, x0			// x0' = sp' - x0 = (sp + x0) - x0 = sp
+	tbnz	x0, #THREAD_SHIFT, 0f
+	sub	x0, sp, x0			// x0'' = sp' - x0' = (sp + x0) - sp = x0
+	sub	sp, sp, x0			// sp'' = sp' - x0 = (sp + x0) - x0 = sp
+	b	el\el\ht\()_\regsize\()_\label
+
+0:
+	/*
+	 * Either we've just detected an overflow, or we've taken an exception
+	 * while on the overflow stack. Either way, we won't return to
+	 * userspace, and can clobber EL0 registers to free up GPRs.
+	 */
+
+	/* Stash the original SP (minus PT_REGS_SIZE) in tpidr_el0. */
+	msr	tpidr_el0, x0
+
+	/* Recover the original x0 value and stash it in tpidrro_el0 */
+	sub	x0, sp, x0
+	msr	tpidrro_el0, x0
+
+	/* Switch to the overflow stack */
+	adr_this_cpu sp, overflow_stack + OVERFLOW_STACK_SIZE, x0
+
+	/*
+	 * Check whether we were already on the overflow stack. This may happen
+	 * after panic() re-enables interrupts.
+	 */
+	mrs	x0, tpidr_el0			// sp of interrupted context
+	sub	x0, sp, x0			// delta with top of overflow stack
+	tst	x0, #~(OVERFLOW_STACK_SIZE - 1)	// within range?
+	b.ne	__bad_stack			// no? -> bad stack pointer
+
+	/* We were already on the overflow stack. Restore sp/x0 and carry on. */
+	sub	sp, sp, x0
+	mrs	x0, tpidrro_el0
+#endif
+	b	el\el\ht\()_\regsize\()_\label
+.org .Lventry_start\@ + 128	// Did we overflow the ventry slot?
+	.endm
+
+	.macro	tramp_alias, dst, sym
+	.set	.Lalias\@, TRAMP_VALIAS + \sym - .entry.tramp.text
+	movz	\dst, :abs_g2_s:.Lalias\@
+	movk	\dst, :abs_g1_nc:.Lalias\@
+	movk	\dst, :abs_g0_nc:.Lalias\@
+	.endm
+
+	/*
+	 * This macro corrupts x0-x3. It is the caller's duty  to save/restore
+	 * them if required.
+	 */
+	.macro	apply_ssbd, state, tmp1, tmp2
+alternative_cb	ARM64_ALWAYS_SYSTEM, spectre_v4_patch_fw_mitigation_enable
+	b	.L__asm_ssbd_skip\@		// Patched to NOP
+alternative_cb_end
+	ldr_this_cpu	\tmp2, arm64_ssbd_callback_required, \tmp1
+	cbz	\tmp2,	.L__asm_ssbd_skip\@
+	ldr	\tmp2, [tsk, #TSK_TI_FLAGS]
+	tbnz	\tmp2, #TIF_SSBD, .L__asm_ssbd_skip\@
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_2
+	mov	w1, #\state
+alternative_cb	ARM64_ALWAYS_SYSTEM, smccc_patch_fw_mitigation_conduit
+	nop					// Patched to SMC/HVC #0
+alternative_cb_end
+.L__asm_ssbd_skip\@:
+	.endm
+
+	/* Check for MTE asynchronous tag check faults */
+	.macro check_mte_async_tcf, tmp, ti_flags, thread_sctlr
+#ifdef CONFIG_ARM64_MTE
+	.arch_extension lse
+alternative_if_not ARM64_MTE
+	b	1f
+alternative_else_nop_endif
+	/*
+	 * Asynchronous tag check faults are only possible in ASYNC (2) or
+	 * ASYM (3) modes. In each of these modes bit 1 of SCTLR_EL1.TCF0 is
+	 * set, so skip the check if it is unset.
+	 */
+	tbz	\thread_sctlr, #(SCTLR_EL1_TCF0_SHIFT + 1), 1f
+	mrs_s	\tmp, SYS_TFSRE0_EL1
+	tbz	\tmp, #SYS_TFSR_EL1_TF0_SHIFT, 1f
+	/* Asynchronous TCF occurred for TTBR0 access, set the TI flag */
+	mov	\tmp, #_TIF_MTE_ASYNC_FAULT
+	add	\ti_flags, tsk, #TSK_TI_FLAGS
+	stset	\tmp, [\ti_flags]
+1:
+#endif
+	.endm
+
+	/* Clear the MTE asynchronous tag check faults */
+	.macro clear_mte_async_tcf thread_sctlr
+#ifdef CONFIG_ARM64_MTE
+alternative_if ARM64_MTE
+	/* See comment in check_mte_async_tcf above. */
+	tbz	\thread_sctlr, #(SCTLR_EL1_TCF0_SHIFT + 1), 1f
+	dsb	ish
+	msr_s	SYS_TFSRE0_EL1, xzr
+1:
+alternative_else_nop_endif
+#endif
+	.endm
+
+	.macro mte_set_gcr, mte_ctrl, tmp
+#ifdef CONFIG_ARM64_MTE
+	ubfx	\tmp, \mte_ctrl, #MTE_CTRL_GCR_USER_EXCL_SHIFT, #16
+	orr	\tmp, \tmp, #SYS_GCR_EL1_RRND
+	msr_s	SYS_GCR_EL1, \tmp
+#endif
+	.endm
+
+	.macro mte_set_kernel_gcr, tmp, tmp2
+#ifdef CONFIG_KASAN_HW_TAGS
+alternative_cb	ARM64_ALWAYS_SYSTEM, kasan_hw_tags_enable
+	b	1f
+alternative_cb_end
+	mov	\tmp, KERNEL_GCR_EL1
+	msr_s	SYS_GCR_EL1, \tmp
+1:
+#endif
+	.endm
+
+	.macro mte_set_user_gcr, tsk, tmp, tmp2
+#ifdef CONFIG_KASAN_HW_TAGS
+alternative_cb	ARM64_ALWAYS_SYSTEM, kasan_hw_tags_enable
+	b	1f
+alternative_cb_end
+	ldr	\tmp, [\tsk, #THREAD_MTE_CTRL]
+
+	mte_set_gcr \tmp, \tmp2
+1:
+#endif
+	.endm
+
+	.macro	kernel_entry, el, regsize = 64
+	.if	\el == 0
+	alternative_insn nop, SET_PSTATE_DIT(1), ARM64_HAS_DIT
+	.endif
+	.if	\regsize == 32
+	mov	w0, w0				// zero upper 32 bits of x0
+	.endif
+	stp	x0, x1, [sp, #16 * 0]
+	stp	x2, x3, [sp, #16 * 1]
+	stp	x4, x5, [sp, #16 * 2]
+	stp	x6, x7, [sp, #16 * 3]
+	stp	x8, x9, [sp, #16 * 4]
+	stp	x10, x11, [sp, #16 * 5]
+	stp	x12, x13, [sp, #16 * 6]
+	stp	x14, x15, [sp, #16 * 7]
+	stp	x16, x17, [sp, #16 * 8]
+	stp	x18, x19, [sp, #16 * 9]
+	stp	x20, x21, [sp, #16 * 10]
+	stp	x22, x23, [sp, #16 * 11]
+	stp	x24, x25, [sp, #16 * 12]
+	stp	x26, x27, [sp, #16 * 13]
+	stp	x28, x29, [sp, #16 * 14]
+
+	.if	\el == 0
+	clear_gp_regs
+	mrs	x21, sp_el0
+	ldr_this_cpu	tsk, __entry_task, x20
+	msr	sp_el0, tsk
+
+	/*
+	 * Ensure MDSCR_EL1.SS is clear, since we can unmask debug exceptions
+	 * when scheduling.
+	 */
+	ldr	x19, [tsk, #TSK_TI_FLAGS]
+	disable_step_tsk x19, x20
+
+	/* Check for asynchronous tag check faults in user space */
+	ldr	x0, [tsk, THREAD_SCTLR_USER]
+	check_mte_async_tcf x22, x23, x0
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	/*
+	 * Enable IA for in-kernel PAC if the task had it disabled. Although
+	 * this could be implemented with an unconditional MRS which would avoid
+	 * a load, this was measured to be slower on Cortex-A75 and Cortex-A76.
+	 *
+	 * Install the kernel IA key only if IA was enabled in the task. If IA
+	 * was disabled on kernel exit then we would have left the kernel IA
+	 * installed so there is no need to install it again.
+	 */
+	tbz	x0, SCTLR_ELx_ENIA_SHIFT, 1f
+	__ptrauth_keys_install_kernel_nosync tsk, x20, x22, x23
+	b	2f
+1:
+	mrs	x0, sctlr_el1
+	orr	x0, x0, SCTLR_ELx_ENIA
+	msr	sctlr_el1, x0
+2:
+alternative_else_nop_endif
+#endif
+
+	apply_ssbd 1, x22, x23
+
+	mte_set_kernel_gcr x22, x23
+
+	/*
+	 * Any non-self-synchronizing system register updates required for
+	 * kernel entry should be placed before this point.
+	 */
+alternative_if ARM64_MTE
+	isb
+	b	1f
+alternative_else_nop_endif
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	isb
+alternative_else_nop_endif
+1:
+
+	scs_load_current
+	.else
+	add	x21, sp, #PT_REGS_SIZE
+	get_current_task tsk
+	.endif /* \el == 0 */
+	mrs	x22, elr_el1
+	mrs	x23, spsr_el1
+	stp	lr, x21, [sp, #S_LR]
+
+	/*
+	 * For exceptions from EL0, create a final frame record.
+	 * For exceptions from EL1, create a synthetic frame record so the
+	 * interrupted code shows up in the backtrace.
+	 */
+	.if \el == 0
+	stp	xzr, xzr, [sp, #S_STACKFRAME]
+	.else
+	stp	x29, x22, [sp, #S_STACKFRAME]
+	.endif
+	add	x29, sp, #S_STACKFRAME
+
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+alternative_if_not ARM64_HAS_PAN
+	bl	__swpan_entry_el\el
+alternative_else_nop_endif
+#endif
+
+	stp	x22, x23, [sp, #S_PC]
+
+	/* Not in a syscall by default (el0_svc overwrites for real syscall) */
+	.if	\el == 0
+	mov	w21, #NO_SYSCALL
+	str	w21, [sp, #S_SYSCALLNO]
+	.endif
+
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+alternative_if_not ARM64_HAS_GIC_PRIO_MASKING
+	b	.Lskip_pmr_save\@
+alternative_else_nop_endif
+
+	mrs_s	x20, SYS_ICC_PMR_EL1
+	str	x20, [sp, #S_PMR_SAVE]
+	mov	x20, #GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET
+	msr_s	SYS_ICC_PMR_EL1, x20
+
+.Lskip_pmr_save\@:
+#endif
+
+	/*
+	 * Registers that may be useful after this macro is invoked:
+	 *
+	 * x20 - ICC_PMR_EL1
+	 * x21 - aborted SP
+	 * x22 - aborted PC
+	 * x23 - aborted PSTATE
+	*/
+	.endm
+
+	.macro	kernel_exit, el
+	.if	\el != 0
+	disable_daif
+	.endif
+
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+alternative_if_not ARM64_HAS_GIC_PRIO_MASKING
+	b	.Lskip_pmr_restore\@
+alternative_else_nop_endif
+
+	ldr	x20, [sp, #S_PMR_SAVE]
+	msr_s	SYS_ICC_PMR_EL1, x20
+
+	/* Ensure priority change is seen by redistributor */
+alternative_if_not ARM64_HAS_GIC_PRIO_RELAXED_SYNC
+	dsb	sy
+alternative_else_nop_endif
+
+.Lskip_pmr_restore\@:
+#endif
+
+	ldp	x21, x22, [sp, #S_PC]		// load ELR, SPSR
+
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+alternative_if_not ARM64_HAS_PAN
+	bl	__swpan_exit_el\el
+alternative_else_nop_endif
+#endif
+
+	.if	\el == 0
+	ldr	x23, [sp, #S_SP]		// load return stack pointer
+	msr	sp_el0, x23
+	tst	x22, #PSR_MODE32_BIT		// native task?
+	b.eq	3f
+
+#ifdef CONFIG_ARM64_ERRATUM_845719
+alternative_if ARM64_WORKAROUND_845719
+#ifdef CONFIG_PID_IN_CONTEXTIDR
+	mrs	x29, contextidr_el1
+	msr	contextidr_el1, x29
+#else
+	msr contextidr_el1, xzr
+#endif
+alternative_else_nop_endif
+#endif
+3:
+	scs_save tsk
+
+	/* Ignore asynchronous tag check faults in the uaccess routines */
+	ldr	x0, [tsk, THREAD_SCTLR_USER]
+	clear_mte_async_tcf x0
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	/*
+	 * IA was enabled for in-kernel PAC. Disable it now if needed, or
+	 * alternatively install the user's IA. All other per-task keys and
+	 * SCTLR bits were updated on task switch.
+	 *
+	 * No kernel C function calls after this.
+	 */
+	tbz	x0, SCTLR_ELx_ENIA_SHIFT, 1f
+	__ptrauth_keys_install_user tsk, x0, x1, x2
+	b	2f
+1:
+	mrs	x0, sctlr_el1
+	bic	x0, x0, SCTLR_ELx_ENIA
+	msr	sctlr_el1, x0
+2:
+alternative_else_nop_endif
+#endif
+
+	mte_set_user_gcr tsk, x0, x1
+
+	apply_ssbd 0, x0, x1
+	.endif
+
+	msr	elr_el1, x21			// set up the return data
+	msr	spsr_el1, x22
+	ldp	x0, x1, [sp, #16 * 0]
+	ldp	x2, x3, [sp, #16 * 1]
+	ldp	x4, x5, [sp, #16 * 2]
+	ldp	x6, x7, [sp, #16 * 3]
+	ldp	x8, x9, [sp, #16 * 4]
+	ldp	x10, x11, [sp, #16 * 5]
+	ldp	x12, x13, [sp, #16 * 6]
+	ldp	x14, x15, [sp, #16 * 7]
+	ldp	x16, x17, [sp, #16 * 8]
+	ldp	x18, x19, [sp, #16 * 9]
+	ldp	x20, x21, [sp, #16 * 10]
+	ldp	x22, x23, [sp, #16 * 11]
+	ldp	x24, x25, [sp, #16 * 12]
+	ldp	x26, x27, [sp, #16 * 13]
+	ldp	x28, x29, [sp, #16 * 14]
+
+	.if	\el == 0
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
+
+	msr	far_el1, x29
+
+	ldr_this_cpu	x30, this_cpu_vector, x29
+	tramp_alias	x29, tramp_exit
+	msr		vbar_el1, x30		// install vector table
+	ldr		lr, [sp, #S_LR]		// restore x30
+	add		sp, sp, #PT_REGS_SIZE	// restore sp
+	br		x29
+
+.L_skip_tramp_exit_\@:
+#endif
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #PT_REGS_SIZE		// restore sp
+
+	/* This must be after the last explicit memory access */
+alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
+	tlbi	vale1, xzr
+	dsb	nsh
+alternative_else_nop_endif
+	eret
+	.else
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #PT_REGS_SIZE		// restore sp
+
+	/* Ensure any device/NC reads complete */
+	alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412
+
+	eret
+	.endif
+	sb
+	.endm
+
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+	/*
+	 * Set the TTBR0 PAN bit in SPSR. When the exception is taken from
+	 * EL0, there is no need to check the state of TTBR0_EL1 since
+	 * accesses are always enabled.
+	 * Note that the meaning of this bit differs from the ARMv8.1 PAN
+	 * feature as all TTBR0_EL1 accesses are disabled, not just those to
+	 * user mappings.
+	 */
+SYM_CODE_START_LOCAL(__swpan_entry_el1)
+	mrs	x21, ttbr0_el1
+	tst	x21, #TTBR_ASID_MASK		// Check for the reserved ASID
+	orr	x23, x23, #PSR_PAN_BIT		// Set the emulated PAN in the saved SPSR
+	b.eq	1f				// TTBR0 access already disabled
+	and	x23, x23, #~PSR_PAN_BIT		// Clear the emulated PAN in the saved SPSR
+SYM_INNER_LABEL(__swpan_entry_el0, SYM_L_LOCAL)
+	__uaccess_ttbr0_disable x21
+1:	ret
+SYM_CODE_END(__swpan_entry_el1)
+
+	/*
+	 * Restore access to TTBR0_EL1. If returning to EL0, no need for SPSR
+	 * PAN bit checking.
+	 */
+SYM_CODE_START_LOCAL(__swpan_exit_el1)
+	tbnz	x22, #22, 1f			// Skip re-enabling TTBR0 access if the PSR_PAN_BIT is set
+	__uaccess_ttbr0_enable x0, x1
+1:	and	x22, x22, #~PSR_PAN_BIT		// ARMv8.0 CPUs do not understand this bit
+	ret
+SYM_CODE_END(__swpan_exit_el1)
+
+SYM_CODE_START_LOCAL(__swpan_exit_el0)
+	__uaccess_ttbr0_enable x0, x1
+	/*
+	 * Enable errata workarounds only if returning to user. The only
+	 * workaround currently required for TTBR0_EL1 changes are for the
+	 * Cavium erratum 27456 (broadcast TLBI instructions may cause I-cache
+	 * corruption).
+	 */
+	b	post_ttbr_update_workaround
+SYM_CODE_END(__swpan_exit_el0)
+#endif
+
+/* GPRs used by entry code */
+tsk	.req	x28		// current thread_info
+
+	.text
+
+/*
+ * Exception vectors.
+ */
+	.pushsection ".entry.text", "ax"
+
+	.align	11
+SYM_CODE_START(vectors)
+	kernel_ventry	1, t, 64, sync		// Synchronous EL1t
+	kernel_ventry	1, t, 64, irq		// IRQ EL1t
+	kernel_ventry	1, t, 64, fiq		// FIQ EL1t
+	kernel_ventry	1, t, 64, error		// Error EL1t
+
+	kernel_ventry	1, h, 64, sync		// Synchronous EL1h
+	kernel_ventry	1, h, 64, irq		// IRQ EL1h
+	kernel_ventry	1, h, 64, fiq		// FIQ EL1h
+	kernel_ventry	1, h, 64, error		// Error EL1h
+
+	kernel_ventry	0, t, 64, sync		// Synchronous 64-bit EL0
+	kernel_ventry	0, t, 64, irq		// IRQ 64-bit EL0
+	kernel_ventry	0, t, 64, fiq		// FIQ 64-bit EL0
+	kernel_ventry	0, t, 64, error		// Error 64-bit EL0
+
+	kernel_ventry	0, t, 32, sync		// Synchronous 32-bit EL0
+	kernel_ventry	0, t, 32, irq		// IRQ 32-bit EL0
+	kernel_ventry	0, t, 32, fiq		// FIQ 32-bit EL0
+	kernel_ventry	0, t, 32, error		// Error 32-bit EL0
+SYM_CODE_END(vectors)
+
+#ifdef CONFIG_VMAP_STACK
+SYM_CODE_START_LOCAL(__bad_stack)
+	/*
+	 * We detected an overflow in kernel_ventry, which switched to the
+	 * overflow stack. Stash the exception regs, and head to our overflow
+	 * handler.
+	 */
+
+	/* Restore the original x0 value */
+	mrs	x0, tpidrro_el0
+
+	/*
+	 * Store the original GPRs to the new stack. The orginal SP (minus
+	 * PT_REGS_SIZE) was stashed in tpidr_el0 by kernel_ventry.
+	 */
+	sub	sp, sp, #PT_REGS_SIZE
+	kernel_entry 1
+	mrs	x0, tpidr_el0
+	add	x0, x0, #PT_REGS_SIZE
+	str	x0, [sp, #S_SP]
+
+	/* Stash the regs for handle_bad_stack */
+	mov	x0, sp
+
+	/* Time to die */
+	bl	handle_bad_stack
+	ASM_BUG()
+SYM_CODE_END(__bad_stack)
+#endif /* CONFIG_VMAP_STACK */
+
+
+	.macro entry_handler el:req, ht:req, regsize:req, label:req
+SYM_CODE_START_LOCAL(el\el\ht\()_\regsize\()_\label)
+	kernel_entry \el, \regsize
+	mov	x0, sp
+	bl	el\el\ht\()_\regsize\()_\label\()_handler
+	.if \el == 0
+	b	ret_to_user
+	.else
+	b	ret_to_kernel
+	.endif
+SYM_CODE_END(el\el\ht\()_\regsize\()_\label)
+	.endm
+
+/*
+ * Early exception handlers
+ */
+	entry_handler	1, t, 64, sync
+	entry_handler	1, t, 64, irq
+	entry_handler	1, t, 64, fiq
+	entry_handler	1, t, 64, error
+
+	entry_handler	1, h, 64, sync
+	entry_handler	1, h, 64, irq
+	entry_handler	1, h, 64, fiq
+	entry_handler	1, h, 64, error
+
+	entry_handler	0, t, 64, sync
+	entry_handler	0, t, 64, irq
+	entry_handler	0, t, 64, fiq
+	entry_handler	0, t, 64, error
+
+	entry_handler	0, t, 32, sync
+	entry_handler	0, t, 32, irq
+	entry_handler	0, t, 32, fiq
+	entry_handler	0, t, 32, error
+
+SYM_CODE_START_LOCAL(ret_to_kernel)
+	kernel_exit 1
+SYM_CODE_END(ret_to_kernel)
+
+SYM_CODE_START_LOCAL(ret_to_user)
+	ldr	x19, [tsk, #TSK_TI_FLAGS]	// re-check for single-step
+	enable_step_tsk x19, x2
+#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
+	bl	stackleak_erase_on_task_stack
+#endif
+	kernel_exit 0
+SYM_CODE_END(ret_to_user)
+
+	.popsection				// .entry.text
+
+	// Move from tramp_pg_dir to swapper_pg_dir
+	.macro tramp_map_kernel, tmp
+	mrs	\tmp, ttbr1_el1
+	add	\tmp, \tmp, #TRAMP_SWAPPER_OFFSET
+	bic	\tmp, \tmp, #USER_ASID_FLAG
+	msr	ttbr1_el1, \tmp
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003
+alternative_if ARM64_WORKAROUND_QCOM_FALKOR_E1003
+	/* ASID already in \tmp[63:48] */
+	movk	\tmp, #:abs_g2_nc:(TRAMP_VALIAS >> 12)
+	movk	\tmp, #:abs_g1_nc:(TRAMP_VALIAS >> 12)
+	/* 2MB boundary containing the vectors, so we nobble the walk cache */
+	movk	\tmp, #:abs_g0_nc:((TRAMP_VALIAS & ~(SZ_2M - 1)) >> 12)
+	isb
+	tlbi	vae1, \tmp
+	dsb	nsh
+alternative_else_nop_endif
+#endif /* CONFIG_QCOM_FALKOR_ERRATUM_1003 */
+	.endm
+
+	// Move from swapper_pg_dir to tramp_pg_dir
+	.macro tramp_unmap_kernel, tmp
+	mrs	\tmp, ttbr1_el1
+	sub	\tmp, \tmp, #TRAMP_SWAPPER_OFFSET
+	orr	\tmp, \tmp, #USER_ASID_FLAG
+	msr	ttbr1_el1, \tmp
+	/*
+	 * We avoid running the post_ttbr_update_workaround here because
+	 * it's only needed by Cavium ThunderX, which requires KPTI to be
+	 * disabled.
+	 */
+	.endm
+
+	.macro		tramp_data_read_var	dst, var
+#ifdef CONFIG_RELOCATABLE
+	ldr		\dst, .L__tramp_data_\var
+	.ifndef		.L__tramp_data_\var
+	.pushsection	".entry.tramp.rodata", "a", %progbits
+	.align		3
+.L__tramp_data_\var:
+	.quad		\var
+	.popsection
+	.endif
+#else
+	/*
+	 * As !RELOCATABLE implies !RANDOMIZE_BASE the address is always a
+	 * compile time constant (and hence not secret and not worth hiding).
+	 *
+	 * As statically allocated kernel code and data always live in the top
+	 * 47 bits of the address space we can sign-extend bit 47 and avoid an
+	 * instruction to load the upper 16 bits (which must be 0xFFFF).
+	 */
+	movz		\dst, :abs_g2_s:\var
+	movk		\dst, :abs_g1_nc:\var
+	movk		\dst, :abs_g0_nc:\var
+#endif
+	.endm
+
+#define BHB_MITIGATION_NONE	0
+#define BHB_MITIGATION_LOOP	1
+#define BHB_MITIGATION_FW	2
+#define BHB_MITIGATION_INSN	3
+
+	.macro tramp_ventry, vector_start, regsize, kpti, bhb
+	.align	7
+1:
+	.if	\regsize == 64
+	msr	tpidrro_el0, x30	// Restored in kernel_ventry
+	.endif
+
+	.if	\bhb == BHB_MITIGATION_LOOP
+	/*
+	 * This sequence must appear before the first indirect branch. i.e. the
+	 * ret out of tramp_ventry. It appears here because x30 is free.
+	 */
+	__mitigate_spectre_bhb_loop	x30
+	.endif // \bhb == BHB_MITIGATION_LOOP
+
+	.if	\bhb == BHB_MITIGATION_INSN
+	clearbhb
+	isb
+	.endif // \bhb == BHB_MITIGATION_INSN
+
+	.if	\kpti == 1
+	/*
+	 * Defend against branch aliasing attacks by pushing a dummy
+	 * entry onto the return stack and using a RET instruction to
+	 * enter the full-fat kernel vectors.
+	 */
+	bl	2f
+	b	.
+2:
+	tramp_map_kernel	x30
+alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
+	tramp_data_read_var	x30, vectors
+alternative_if_not ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM
+	prfm	plil1strm, [x30, #(1b - \vector_start)]
+alternative_else_nop_endif
+
+	msr	vbar_el1, x30
+	isb
+	.else
+	adr_l	x30, vectors
+	.endif // \kpti == 1
+
+	.if	\bhb == BHB_MITIGATION_FW
+	/*
+	 * The firmware sequence must appear before the first indirect branch.
+	 * i.e. the ret out of tramp_ventry. But it also needs the stack to be
+	 * mapped to save/restore the registers the SMC clobbers.
+	 */
+	__mitigate_spectre_bhb_fw
+	.endif // \bhb == BHB_MITIGATION_FW
+
+	add	x30, x30, #(1b - \vector_start + 4)
+	ret
+.org 1b + 128	// Did we overflow the ventry slot?
+	.endm
+
+	.macro	generate_tramp_vector,	kpti, bhb
+.Lvector_start\@:
+	.space	0x400
+
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 64, \kpti, \bhb
+	.endr
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 32, \kpti, \bhb
+	.endr
+	.endm
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+/*
+ * Exception vectors trampoline.
+ * The order must match __bp_harden_el1_vectors and the
+ * arm64_bp_harden_el1_vectors enum.
+ */
+	.pushsection ".entry.tramp.text", "ax"
+	.align	11
+SYM_CODE_START_LOCAL_NOALIGN(tramp_vectors)
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_LOOP
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_FW
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_INSN
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_NONE
+SYM_CODE_END(tramp_vectors)
+
+SYM_CODE_START_LOCAL(tramp_exit)
+	tramp_unmap_kernel	x29
+	mrs		x29, far_el1		// restore x29
+	eret
+	sb
+SYM_CODE_END(tramp_exit)
+	.popsection				// .entry.tramp.text
+#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
+
+/*
+ * Exception vectors for spectre mitigations on entry from EL1 when
+ * kpti is not in use.
+ */
+	.macro generate_el1_vector, bhb
+.Lvector_start\@:
+	kernel_ventry	1, t, 64, sync		// Synchronous EL1t
+	kernel_ventry	1, t, 64, irq		// IRQ EL1t
+	kernel_ventry	1, t, 64, fiq		// FIQ EL1h
+	kernel_ventry	1, t, 64, error		// Error EL1t
+
+	kernel_ventry	1, h, 64, sync		// Synchronous EL1h
+	kernel_ventry	1, h, 64, irq		// IRQ EL1h
+	kernel_ventry	1, h, 64, fiq		// FIQ EL1h
+	kernel_ventry	1, h, 64, error		// Error EL1h
+
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 64, 0, \bhb
+	.endr
+	.rept 4
+	tramp_ventry	.Lvector_start\@, 32, 0, \bhb
+	.endr
+	.endm
+
+/* The order must match tramp_vecs and the arm64_bp_harden_el1_vectors enum. */
+	.pushsection ".entry.text", "ax"
+	.align	11
+SYM_CODE_START(__bp_harden_el1_vectors)
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	generate_el1_vector	bhb=BHB_MITIGATION_LOOP
+	generate_el1_vector	bhb=BHB_MITIGATION_FW
+	generate_el1_vector	bhb=BHB_MITIGATION_INSN
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+SYM_CODE_END(__bp_harden_el1_vectors)
+	.popsection
+
+
+/*
+ * Register switch for AArch64. The callee-saved registers need to be saved
+ * and restored. On entry:
+ *   x0 = previous task_struct (must be preserved across the switch)
+ *   x1 = next task_struct
+ * Previous and next are guaranteed not to be the same.
+ *
+ */
+SYM_FUNC_START(cpu_switch_to)
+	mov	x10, #THREAD_CPU_CONTEXT
+	add	x8, x0, x10
+	mov	x9, sp
+	stp	x19, x20, [x8], #16		// store callee-saved registers
+	stp	x21, x22, [x8], #16
+	stp	x23, x24, [x8], #16
+	stp	x25, x26, [x8], #16
+	stp	x27, x28, [x8], #16
+	stp	x29, x9, [x8], #16
+	str	lr, [x8]
+	add	x8, x1, x10
+	ldp	x19, x20, [x8], #16		// restore callee-saved registers
+	ldp	x21, x22, [x8], #16
+	ldp	x23, x24, [x8], #16
+	ldp	x25, x26, [x8], #16
+	ldp	x27, x28, [x8], #16
+	ldp	x29, x9, [x8], #16
+	ldr	lr, [x8]
+	mov	sp, x9
+	msr	sp_el0, x1
+	ptrauth_keys_install_kernel x1, x8, x9, x10
+	scs_save x0
+	scs_load_current
+	ret
+SYM_FUNC_END(cpu_switch_to)
+NOKPROBE(cpu_switch_to)
+
+/*
+ * This is how we return from a fork.
+ */
+SYM_CODE_START(ret_from_fork)
+	bl	schedule_tail
+	cbz	x19, 1f				// not a kernel thread
+	mov	x0, x20
+	blr	x19
+1:	get_current_task tsk
+	mov	x0, sp
+	bl	asm_exit_to_user_mode
+	b	ret_to_user
+SYM_CODE_END(ret_from_fork)
+NOKPROBE(ret_from_fork)
+
+/*
+ * void call_on_irq_stack(struct pt_regs *regs,
+ * 		          void (*func)(struct pt_regs *));
+ *
+ * Calls func(regs) using this CPU's irq stack and shadow irq stack.
+ */
+SYM_FUNC_START(call_on_irq_stack)
+#ifdef CONFIG_SHADOW_CALL_STACK
+	get_current_task x16
+	scs_save x16
+	ldr_this_cpu scs_sp, irq_shadow_call_stack_ptr, x17
+#endif
+
+	/* Create a frame record to save our LR and SP (implicit in FP) */
+	stp	x29, x30, [sp, #-16]!
+	mov	x29, sp
+
+	ldr_this_cpu x16, irq_stack_ptr, x17
+
+	/* Move to the new stack and call the function there */
+	add	sp, x16, #IRQ_STACK_SIZE
+	blr	x1
+
+	/*
+	 * Restore the SP from the FP, and restore the FP and LR from the frame
+	 * record.
+	 */
+	mov	sp, x29
+	ldp	x29, x30, [sp], #16
+	scs_load_current
+	ret
+SYM_FUNC_END(call_on_irq_stack)
+NOKPROBE(call_on_irq_stack)
+
+#ifdef CONFIG_ARM_SDE_INTERFACE
+
+#include <asm/sdei.h>
+#include <uapi/linux/arm_sdei.h>
+
+.macro sdei_handler_exit exit_mode
+	/* On success, this call never returns... */
+	cmp	\exit_mode, #SDEI_EXIT_SMC
+	b.ne	99f
+	smc	#0
+	b	.
+99:	hvc	#0
+	b	.
+.endm
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+/*
+ * The regular SDEI entry point may have been unmapped along with the rest of
+ * the kernel. This trampoline restores the kernel mapping to make the x1 memory
+ * argument accessible.
+ *
+ * This clobbers x4, __sdei_handler() will restore this from firmware's
+ * copy.
+ */
+.pushsection ".entry.tramp.text", "ax"
+SYM_CODE_START(__sdei_asm_entry_trampoline)
+	mrs	x4, ttbr1_el1
+	tbz	x4, #USER_ASID_BIT, 1f
+
+	tramp_map_kernel tmp=x4
+	isb
+	mov	x4, xzr
+
+	/*
+	 * Remember whether to unmap the kernel on exit.
+	 */
+1:	str	x4, [x1, #(SDEI_EVENT_INTREGS + S_SDEI_TTBR1)]
+	tramp_data_read_var     x4, __sdei_asm_handler
+	br	x4
+SYM_CODE_END(__sdei_asm_entry_trampoline)
+NOKPROBE(__sdei_asm_entry_trampoline)
+
+/*
+ * Make the exit call and restore the original ttbr1_el1
+ *
+ * x0 & x1: setup for the exit API call
+ * x2: exit_mode
+ * x4: struct sdei_registered_event argument from registration time.
+ */
+SYM_CODE_START(__sdei_asm_exit_trampoline)
+	ldr	x4, [x4, #(SDEI_EVENT_INTREGS + S_SDEI_TTBR1)]
+	cbnz	x4, 1f
+
+	tramp_unmap_kernel	tmp=x4
+
+1:	sdei_handler_exit exit_mode=x2
+SYM_CODE_END(__sdei_asm_exit_trampoline)
+NOKPROBE(__sdei_asm_exit_trampoline)
+.popsection		// .entry.tramp.text
+#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
+
+/*
+ * Software Delegated Exception entry point.
+ *
+ * x0: Event number
+ * x1: struct sdei_registered_event argument from registration time.
+ * x2: interrupted PC
+ * x3: interrupted PSTATE
+ * x4: maybe clobbered by the trampoline
+ *
+ * Firmware has preserved x0->x17 for us, we must save/restore the rest to
+ * follow SMC-CC. We save (or retrieve) all the registers as the handler may
+ * want them.
+ */
+SYM_CODE_START(__sdei_asm_handler)
+	stp     x2, x3, [x1, #SDEI_EVENT_INTREGS + S_PC]
+	stp     x4, x5, [x1, #SDEI_EVENT_INTREGS + 16 * 2]
+	stp     x6, x7, [x1, #SDEI_EVENT_INTREGS + 16 * 3]
+	stp     x8, x9, [x1, #SDEI_EVENT_INTREGS + 16 * 4]
+	stp     x10, x11, [x1, #SDEI_EVENT_INTREGS + 16 * 5]
+	stp     x12, x13, [x1, #SDEI_EVENT_INTREGS + 16 * 6]
+	stp     x14, x15, [x1, #SDEI_EVENT_INTREGS + 16 * 7]
+	stp     x16, x17, [x1, #SDEI_EVENT_INTREGS + 16 * 8]
+	stp     x18, x19, [x1, #SDEI_EVENT_INTREGS + 16 * 9]
+	stp     x20, x21, [x1, #SDEI_EVENT_INTREGS + 16 * 10]
+	stp     x22, x23, [x1, #SDEI_EVENT_INTREGS + 16 * 11]
+	stp     x24, x25, [x1, #SDEI_EVENT_INTREGS + 16 * 12]
+	stp     x26, x27, [x1, #SDEI_EVENT_INTREGS + 16 * 13]
+	stp     x28, x29, [x1, #SDEI_EVENT_INTREGS + 16 * 14]
+	mov	x4, sp
+	stp     lr, x4, [x1, #SDEI_EVENT_INTREGS + S_LR]
+
+	mov	x19, x1
+
+	/* Store the registered-event for crash_smp_send_stop() */
+	ldrb	w4, [x19, #SDEI_EVENT_PRIORITY]
+	cbnz	w4, 1f
+	adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6
+	b	2f
+1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
+2:	str	x19, [x5]
+
+#ifdef CONFIG_VMAP_STACK
+	/*
+	 * entry.S may have been using sp as a scratch register, find whether
+	 * this is a normal or critical event and switch to the appropriate
+	 * stack for this CPU.
+	 */
+	cbnz	w4, 1f
+	ldr_this_cpu dst=x5, sym=sdei_stack_normal_ptr, tmp=x6
+	b	2f
+1:	ldr_this_cpu dst=x5, sym=sdei_stack_critical_ptr, tmp=x6
+2:	mov	x6, #SDEI_STACK_SIZE
+	add	x5, x5, x6
+	mov	sp, x5
+#endif
+
+#ifdef CONFIG_SHADOW_CALL_STACK
+	/* Use a separate shadow call stack for normal and critical events */
+	cbnz	w4, 3f
+	ldr_this_cpu dst=scs_sp, sym=sdei_shadow_call_stack_normal_ptr, tmp=x6
+	b	4f
+3:	ldr_this_cpu dst=scs_sp, sym=sdei_shadow_call_stack_critical_ptr, tmp=x6
+4:
+#endif
+
+	/*
+	 * We may have interrupted userspace, or a guest, or exit-from or
+	 * return-to either of these. We can't trust sp_el0, restore it.
+	 */
+	mrs	x28, sp_el0
+	ldr_this_cpu	dst=x0, sym=__entry_task, tmp=x1
+	msr	sp_el0, x0
+
+	/* If we interrupted the kernel point to the previous stack/frame. */
+	and     x0, x3, #0xc
+	mrs     x1, CurrentEL
+	cmp     x0, x1
+	csel	x29, x29, xzr, eq	// fp, or zero
+	csel	x4, x2, xzr, eq		// elr, or zero
+
+	stp	x29, x4, [sp, #-16]!
+	mov	x29, sp
+
+	add	x0, x19, #SDEI_EVENT_INTREGS
+	mov	x1, x19
+	bl	__sdei_handler
+
+	msr	sp_el0, x28
+	/* restore regs >x17 that we clobbered */
+	mov	x4, x19         // keep x4 for __sdei_asm_exit_trampoline
+	ldp	x28, x29, [x4, #SDEI_EVENT_INTREGS + 16 * 14]
+	ldp	x18, x19, [x4, #SDEI_EVENT_INTREGS + 16 * 9]
+	ldp	lr, x1, [x4, #SDEI_EVENT_INTREGS + S_LR]
+	mov	sp, x1
+
+	mov	x1, x0			// address to complete_and_resume
+	/* x0 = (x0 <= SDEI_EV_FAILED) ?
+	 * EVENT_COMPLETE:EVENT_COMPLETE_AND_RESUME
+	 */
+	cmp	x0, #SDEI_EV_FAILED
+	mov_q	x2, SDEI_1_0_FN_SDEI_EVENT_COMPLETE
+	mov_q	x3, SDEI_1_0_FN_SDEI_EVENT_COMPLETE_AND_RESUME
+	csel	x0, x2, x3, ls
+
+	ldr_l	x2, sdei_exit_mode
+
+	/* Clear the registered-event seen by crash_smp_send_stop() */
+	ldrb	w3, [x4, #SDEI_EVENT_PRIORITY]
+	cbnz	w3, 1f
+	adr_this_cpu dst=x5, sym=sdei_active_normal_event, tmp=x6
+	b	2f
+1:	adr_this_cpu dst=x5, sym=sdei_active_critical_event, tmp=x6
+2:	str	xzr, [x5]
+
+alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
+	sdei_handler_exit exit_mode=x2
+alternative_else_nop_endif
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	tramp_alias	dst=x5, sym=__sdei_asm_exit_trampoline
+	br	x5
+#endif
+SYM_CODE_END(__sdei_asm_handler)
+NOKPROBE(__sdei_asm_handler)
+
+SYM_CODE_START(__sdei_handler_abort)
+	mov_q	x0, SDEI_1_0_FN_SDEI_EVENT_COMPLETE_AND_RESUME
+	adr	x1, 1f
+	ldr_l	x2, sdei_exit_mode
+	sdei_handler_exit exit_mode=x2
+	// exit the handler and jump to the next instruction.
+	// Exit will stomp x0-x17, PSTATE, ELR_ELx, and SPSR_ELx.
+1:	ret
+SYM_CODE_END(__sdei_handler_abort)
+NOKPROBE(__sdei_handler_abort)
+#endif /* CONFIG_ARM_SDE_INTERFACE */
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
new file mode 100644
index 000000000..f9b3adebc
--- /dev/null
+++ b/arch/arm64/kernel/fpsimd.c
@@ -0,0 +1,2136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * FP/SIMD context switching and fault handling
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/bottom_half.h>
+#include <linux/bug.h>
+#include <linux/cache.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
+#include <linux/irqflags.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/prctl.h>
+#include <linux/preempt.h>
+#include <linux/ptrace.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/task_stack.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+#include <linux/sysctl.h>
+#include <linux/swab.h>
+
+#include <asm/esr.h>
+#include <asm/exception.h>
+#include <asm/fpsimd.h>
+#include <asm/cpufeature.h>
+#include <asm/cputype.h>
+#include <asm/neon.h>
+#include <asm/processor.h>
+#include <asm/simd.h>
+#include <asm/sigcontext.h>
+#include <asm/sysreg.h>
+#include <asm/traps.h>
+#include <asm/virt.h>
+
+#define FPEXC_IOF	(1 << 0)
+#define FPEXC_DZF	(1 << 1)
+#define FPEXC_OFF	(1 << 2)
+#define FPEXC_UFF	(1 << 3)
+#define FPEXC_IXF	(1 << 4)
+#define FPEXC_IDF	(1 << 7)
+
+/*
+ * (Note: in this discussion, statements about FPSIMD apply equally to SVE.)
+ *
+ * In order to reduce the number of times the FPSIMD state is needlessly saved
+ * and restored, we need to keep track of two things:
+ * (a) for each task, we need to remember which CPU was the last one to have
+ *     the task's FPSIMD state loaded into its FPSIMD registers;
+ * (b) for each CPU, we need to remember which task's userland FPSIMD state has
+ *     been loaded into its FPSIMD registers most recently, or whether it has
+ *     been used to perform kernel mode NEON in the meantime.
+ *
+ * For (a), we add a fpsimd_cpu field to thread_struct, which gets updated to
+ * the id of the current CPU every time the state is loaded onto a CPU. For (b),
+ * we add the per-cpu variable 'fpsimd_last_state' (below), which contains the
+ * address of the userland FPSIMD state of the task that was loaded onto the CPU
+ * the most recently, or NULL if kernel mode NEON has been performed after that.
+ *
+ * With this in place, we no longer have to restore the next FPSIMD state right
+ * when switching between tasks. Instead, we can defer this check to userland
+ * resume, at which time we verify whether the CPU's fpsimd_last_state and the
+ * task's fpsimd_cpu are still mutually in sync. If this is the case, we
+ * can omit the FPSIMD restore.
+ *
+ * As an optimization, we use the thread_info flag TIF_FOREIGN_FPSTATE to
+ * indicate whether or not the userland FPSIMD state of the current task is
+ * present in the registers. The flag is set unless the FPSIMD registers of this
+ * CPU currently contain the most recent userland FPSIMD state of the current
+ * task. If the task is behaving as a VMM, then this is will be managed by
+ * KVM which will clear it to indicate that the vcpu FPSIMD state is currently
+ * loaded on the CPU, allowing the state to be saved if a FPSIMD-aware
+ * softirq kicks in. Upon vcpu_put(), KVM will save the vcpu FP state and
+ * flag the register state as invalid.
+ *
+ * In order to allow softirq handlers to use FPSIMD, kernel_neon_begin() may
+ * save the task's FPSIMD context back to task_struct from softirq context.
+ * To prevent this from racing with the manipulation of the task's FPSIMD state
+ * from task context and thereby corrupting the state, it is necessary to
+ * protect any manipulation of a task's fpsimd_state or TIF_FOREIGN_FPSTATE
+ * flag with {, __}get_cpu_fpsimd_context(). This will still allow softirqs to
+ * run but prevent them to use FPSIMD.
+ *
+ * For a certain task, the sequence may look something like this:
+ * - the task gets scheduled in; if both the task's fpsimd_cpu field
+ *   contains the id of the current CPU, and the CPU's fpsimd_last_state per-cpu
+ *   variable points to the task's fpsimd_state, the TIF_FOREIGN_FPSTATE flag is
+ *   cleared, otherwise it is set;
+ *
+ * - the task returns to userland; if TIF_FOREIGN_FPSTATE is set, the task's
+ *   userland FPSIMD state is copied from memory to the registers, the task's
+ *   fpsimd_cpu field is set to the id of the current CPU, the current
+ *   CPU's fpsimd_last_state pointer is set to this task's fpsimd_state and the
+ *   TIF_FOREIGN_FPSTATE flag is cleared;
+ *
+ * - the task executes an ordinary syscall; upon return to userland, the
+ *   TIF_FOREIGN_FPSTATE flag will still be cleared, so no FPSIMD state is
+ *   restored;
+ *
+ * - the task executes a syscall which executes some NEON instructions; this is
+ *   preceded by a call to kernel_neon_begin(), which copies the task's FPSIMD
+ *   register contents to memory, clears the fpsimd_last_state per-cpu variable
+ *   and sets the TIF_FOREIGN_FPSTATE flag;
+ *
+ * - the task gets preempted after kernel_neon_end() is called; as we have not
+ *   returned from the 2nd syscall yet, TIF_FOREIGN_FPSTATE is still set so
+ *   whatever is in the FPSIMD registers is not saved to memory, but discarded.
+ */
+
+static DEFINE_PER_CPU(struct cpu_fp_state, fpsimd_last_state);
+
+__ro_after_init struct vl_info vl_info[ARM64_VEC_MAX] = {
+#ifdef CONFIG_ARM64_SVE
+	[ARM64_VEC_SVE] = {
+		.type			= ARM64_VEC_SVE,
+		.name			= "SVE",
+		.min_vl			= SVE_VL_MIN,
+		.max_vl			= SVE_VL_MIN,
+		.max_virtualisable_vl	= SVE_VL_MIN,
+	},
+#endif
+#ifdef CONFIG_ARM64_SME
+	[ARM64_VEC_SME] = {
+		.type			= ARM64_VEC_SME,
+		.name			= "SME",
+	},
+#endif
+};
+
+static unsigned int vec_vl_inherit_flag(enum vec_type type)
+{
+	switch (type) {
+	case ARM64_VEC_SVE:
+		return TIF_SVE_VL_INHERIT;
+	case ARM64_VEC_SME:
+		return TIF_SME_VL_INHERIT;
+	default:
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+}
+
+struct vl_config {
+	int __default_vl;		/* Default VL for tasks */
+};
+
+static struct vl_config vl_config[ARM64_VEC_MAX];
+
+static inline int get_default_vl(enum vec_type type)
+{
+	return READ_ONCE(vl_config[type].__default_vl);
+}
+
+#ifdef CONFIG_ARM64_SVE
+
+static inline int get_sve_default_vl(void)
+{
+	return get_default_vl(ARM64_VEC_SVE);
+}
+
+static inline void set_default_vl(enum vec_type type, int val)
+{
+	WRITE_ONCE(vl_config[type].__default_vl, val);
+}
+
+static inline void set_sve_default_vl(int val)
+{
+	set_default_vl(ARM64_VEC_SVE, val);
+}
+
+static void __percpu *efi_sve_state;
+
+#else /* ! CONFIG_ARM64_SVE */
+
+/* Dummy declaration for code that will be optimised out: */
+extern void __percpu *efi_sve_state;
+
+#endif /* ! CONFIG_ARM64_SVE */
+
+#ifdef CONFIG_ARM64_SME
+
+static int get_sme_default_vl(void)
+{
+	return get_default_vl(ARM64_VEC_SME);
+}
+
+static void set_sme_default_vl(int val)
+{
+	set_default_vl(ARM64_VEC_SME, val);
+}
+
+static void sme_free(struct task_struct *);
+
+#else
+
+static inline void sme_free(struct task_struct *t) { }
+
+#endif
+
+DEFINE_PER_CPU(bool, fpsimd_context_busy);
+EXPORT_PER_CPU_SYMBOL(fpsimd_context_busy);
+
+static void fpsimd_bind_task_to_cpu(void);
+
+static void __get_cpu_fpsimd_context(void)
+{
+	bool busy = __this_cpu_xchg(fpsimd_context_busy, true);
+
+	WARN_ON(busy);
+}
+
+/*
+ * Claim ownership of the CPU FPSIMD context for use by the calling context.
+ *
+ * The caller may freely manipulate the FPSIMD context metadata until
+ * put_cpu_fpsimd_context() is called.
+ *
+ * The double-underscore version must only be called if you know the task
+ * can't be preempted.
+ *
+ * On RT kernels local_bh_disable() is not sufficient because it only
+ * serializes soft interrupt related sections via a local lock, but stays
+ * preemptible. Disabling preemption is the right choice here as bottom
+ * half processing is always in thread context on RT kernels so it
+ * implicitly prevents bottom half processing as well.
+ */
+static void get_cpu_fpsimd_context(void)
+{
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_disable();
+	else
+		preempt_disable();
+	__get_cpu_fpsimd_context();
+}
+
+static void __put_cpu_fpsimd_context(void)
+{
+	bool busy = __this_cpu_xchg(fpsimd_context_busy, false);
+
+	WARN_ON(!busy); /* No matching get_cpu_fpsimd_context()? */
+}
+
+/*
+ * Release the CPU FPSIMD context.
+ *
+ * Must be called from a context in which get_cpu_fpsimd_context() was
+ * previously called, with no call to put_cpu_fpsimd_context() in the
+ * meantime.
+ */
+static void put_cpu_fpsimd_context(void)
+{
+	__put_cpu_fpsimd_context();
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_bh_enable();
+	else
+		preempt_enable();
+}
+
+static bool have_cpu_fpsimd_context(void)
+{
+	return !preemptible() && __this_cpu_read(fpsimd_context_busy);
+}
+
+unsigned int task_get_vl(const struct task_struct *task, enum vec_type type)
+{
+	return task->thread.vl[type];
+}
+
+void task_set_vl(struct task_struct *task, enum vec_type type,
+		 unsigned long vl)
+{
+	task->thread.vl[type] = vl;
+}
+
+unsigned int task_get_vl_onexec(const struct task_struct *task,
+				enum vec_type type)
+{
+	return task->thread.vl_onexec[type];
+}
+
+void task_set_vl_onexec(struct task_struct *task, enum vec_type type,
+			unsigned long vl)
+{
+	task->thread.vl_onexec[type] = vl;
+}
+
+/*
+ * TIF_SME controls whether a task can use SME without trapping while
+ * in userspace, when TIF_SME is set then we must have storage
+ * allocated in sve_state and sme_state to store the contents of both ZA
+ * and the SVE registers for both streaming and non-streaming modes.
+ *
+ * If both SVCR.ZA and SVCR.SM are disabled then at any point we
+ * may disable TIF_SME and reenable traps.
+ */
+
+
+/*
+ * TIF_SVE controls whether a task can use SVE without trapping while
+ * in userspace, and also (together with TIF_SME) the way a task's
+ * FPSIMD/SVE state is stored in thread_struct.
+ *
+ * The kernel uses this flag to track whether a user task is actively
+ * using SVE, and therefore whether full SVE register state needs to
+ * be tracked.  If not, the cheaper FPSIMD context handling code can
+ * be used instead of the more costly SVE equivalents.
+ *
+ *  * TIF_SVE or SVCR.SM set:
+ *
+ *    The task can execute SVE instructions while in userspace without
+ *    trapping to the kernel.
+ *
+ *    During any syscall, the kernel may optionally clear TIF_SVE and
+ *    discard the vector state except for the FPSIMD subset.
+ *
+ *  * TIF_SVE clear:
+ *
+ *    An attempt by the user task to execute an SVE instruction causes
+ *    do_sve_acc() to be called, which does some preparation and then
+ *    sets TIF_SVE.
+ *
+ * During any syscall, the kernel may optionally clear TIF_SVE and
+ * discard the vector state except for the FPSIMD subset.
+ *
+ * The data will be stored in one of two formats:
+ *
+ *  * FPSIMD only - FP_STATE_FPSIMD:
+ *
+ *    When the FPSIMD only state stored task->thread.fp_type is set to
+ *    FP_STATE_FPSIMD, the FPSIMD registers V0-V31 are encoded in
+ *    task->thread.uw.fpsimd_state; bits [max : 128] for each of Z0-Z31 are
+ *    logically zero but not stored anywhere; P0-P15 and FFR are not
+ *    stored and have unspecified values from userspace's point of
+ *    view.  For hygiene purposes, the kernel zeroes them on next use,
+ *    but userspace is discouraged from relying on this.
+ *
+ *    task->thread.sve_state does not need to be non-NULL, valid or any
+ *    particular size: it must not be dereferenced and any data stored
+ *    there should be considered stale and not referenced.
+ *
+ *  * SVE state - FP_STATE_SVE:
+ *
+ *    When the full SVE state is stored task->thread.fp_type is set to
+ *    FP_STATE_SVE and Z0-Z31 (incorporating Vn in bits[127:0] or the
+ *    corresponding Zn), P0-P15 and FFR are encoded in in
+ *    task->thread.sve_state, formatted appropriately for vector
+ *    length task->thread.sve_vl or, if SVCR.SM is set,
+ *    task->thread.sme_vl. The storage for the vector registers in
+ *    task->thread.uw.fpsimd_state should be ignored.
+ *
+ *    task->thread.sve_state must point to a valid buffer at least
+ *    sve_state_size(task) bytes in size. The data stored in
+ *    task->thread.uw.fpsimd_state.vregs should be considered stale
+ *    and not referenced.
+ *
+ *  * FPSR and FPCR are always stored in task->thread.uw.fpsimd_state
+ *    irrespective of whether TIF_SVE is clear or set, since these are
+ *    not vector length dependent.
+ */
+
+/*
+ * Update current's FPSIMD/SVE registers from thread_struct.
+ *
+ * This function should be called only when the FPSIMD/SVE state in
+ * thread_struct is known to be up to date, when preparing to enter
+ * userspace.
+ */
+static void task_fpsimd_load(void)
+{
+	bool restore_sve_regs = false;
+	bool restore_ffr;
+
+	WARN_ON(!system_supports_fpsimd());
+	WARN_ON(!have_cpu_fpsimd_context());
+
+	if (system_supports_sve() || system_supports_sme()) {
+		switch (current->thread.fp_type) {
+		case FP_STATE_FPSIMD:
+			/* Stop tracking SVE for this task until next use. */
+			if (test_and_clear_thread_flag(TIF_SVE))
+				sve_user_disable();
+			break;
+		case FP_STATE_SVE:
+			if (!thread_sm_enabled(&current->thread) &&
+			    !WARN_ON_ONCE(!test_and_set_thread_flag(TIF_SVE)))
+				sve_user_enable();
+
+			if (test_thread_flag(TIF_SVE))
+				sve_set_vq(sve_vq_from_vl(task_get_sve_vl(current)) - 1);
+
+			restore_sve_regs = true;
+			restore_ffr = true;
+			break;
+		default:
+			/*
+			 * This indicates either a bug in
+			 * fpsimd_save() or memory corruption, we
+			 * should always record an explicit format
+			 * when we save. We always at least have the
+			 * memory allocated for FPSMID registers so
+			 * try that and hope for the best.
+			 */
+			WARN_ON_ONCE(1);
+			clear_thread_flag(TIF_SVE);
+			break;
+		}
+	}
+
+	/* Restore SME, override SVE register configuration if needed */
+	if (system_supports_sme()) {
+		unsigned long sme_vl = task_get_sme_vl(current);
+
+		/* Ensure VL is set up for restoring data */
+		if (test_thread_flag(TIF_SME))
+			sme_set_vq(sve_vq_from_vl(sme_vl) - 1);
+
+		write_sysreg_s(current->thread.svcr, SYS_SVCR);
+
+		if (thread_za_enabled(&current->thread))
+			sme_load_state(current->thread.sme_state,
+				       system_supports_sme2());
+
+		if (thread_sm_enabled(&current->thread))
+			restore_ffr = system_supports_fa64();
+	}
+
+	if (restore_sve_regs) {
+		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_SVE);
+		sve_load_state(sve_pffr(&current->thread),
+			       &current->thread.uw.fpsimd_state.fpsr,
+			       restore_ffr);
+	} else {
+		WARN_ON_ONCE(current->thread.fp_type != FP_STATE_FPSIMD);
+		fpsimd_load_state(&current->thread.uw.fpsimd_state);
+	}
+}
+
+/*
+ * Ensure FPSIMD/SVE storage in memory for the loaded context is up to
+ * date with respect to the CPU registers. Note carefully that the
+ * current context is the context last bound to the CPU stored in
+ * last, if KVM is involved this may be the guest VM context rather
+ * than the host thread for the VM pointed to by current. This means
+ * that we must always reference the state storage via last rather
+ * than via current, if we are saving KVM state then it will have
+ * ensured that the type of registers to save is set in last->to_save.
+ */
+static void fpsimd_save(void)
+{
+	struct cpu_fp_state const *last =
+		this_cpu_ptr(&fpsimd_last_state);
+	/* set by fpsimd_bind_task_to_cpu() or fpsimd_bind_state_to_cpu() */
+	bool save_sve_regs = false;
+	bool save_ffr;
+	unsigned int vl;
+
+	WARN_ON(!system_supports_fpsimd());
+	WARN_ON(!have_cpu_fpsimd_context());
+
+	if (test_thread_flag(TIF_FOREIGN_FPSTATE))
+		return;
+
+	/*
+	 * If a task is in a syscall the ABI allows us to only
+	 * preserve the state shared with FPSIMD so don't bother
+	 * saving the full SVE state in that case.
+	 */
+	if ((last->to_save == FP_STATE_CURRENT && test_thread_flag(TIF_SVE) &&
+	     !in_syscall(current_pt_regs())) ||
+	    last->to_save == FP_STATE_SVE) {
+		save_sve_regs = true;
+		save_ffr = true;
+		vl = last->sve_vl;
+	}
+
+	if (system_supports_sme()) {
+		u64 *svcr = last->svcr;
+
+		*svcr = read_sysreg_s(SYS_SVCR);
+
+		if (*svcr & SVCR_ZA_MASK)
+			sme_save_state(last->sme_state,
+				       system_supports_sme2());
+
+		/* If we are in streaming mode override regular SVE. */
+		if (*svcr & SVCR_SM_MASK) {
+			save_sve_regs = true;
+			save_ffr = system_supports_fa64();
+			vl = last->sme_vl;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_ARM64_SVE) && save_sve_regs) {
+		/* Get the configured VL from RDVL, will account for SM */
+		if (WARN_ON(sve_get_vl() != vl)) {
+			/*
+			 * Can't save the user regs, so current would
+			 * re-enter user with corrupt state.
+			 * There's no way to recover, so kill it:
+			 */
+			force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
+			return;
+		}
+
+		sve_save_state((char *)last->sve_state +
+					sve_ffr_offset(vl),
+			       &last->st->fpsr, save_ffr);
+		*last->fp_type = FP_STATE_SVE;
+	} else {
+		fpsimd_save_state(last->st);
+		*last->fp_type = FP_STATE_FPSIMD;
+	}
+}
+
+/*
+ * All vector length selection from userspace comes through here.
+ * We're on a slow path, so some sanity-checks are included.
+ * If things go wrong there's a bug somewhere, but try to fall back to a
+ * safe choice.
+ */
+static unsigned int find_supported_vector_length(enum vec_type type,
+						 unsigned int vl)
+{
+	struct vl_info *info = &vl_info[type];
+	int bit;
+	int max_vl = info->max_vl;
+
+	if (WARN_ON(!sve_vl_valid(vl)))
+		vl = info->min_vl;
+
+	if (WARN_ON(!sve_vl_valid(max_vl)))
+		max_vl = info->min_vl;
+
+	if (vl > max_vl)
+		vl = max_vl;
+	if (vl < info->min_vl)
+		vl = info->min_vl;
+
+	bit = find_next_bit(info->vq_map, SVE_VQ_MAX,
+			    __vq_to_bit(sve_vq_from_vl(vl)));
+	return sve_vl_from_vq(__bit_to_vq(bit));
+}
+
+#if defined(CONFIG_ARM64_SVE) && defined(CONFIG_SYSCTL)
+
+static int vec_proc_do_default_vl(struct ctl_table *table, int write,
+				  void *buffer, size_t *lenp, loff_t *ppos)
+{
+	struct vl_info *info = table->extra1;
+	enum vec_type type = info->type;
+	int ret;
+	int vl = get_default_vl(type);
+	struct ctl_table tmp_table = {
+		.data = &vl,
+		.maxlen = sizeof(vl),
+	};
+
+	ret = proc_dointvec(&tmp_table, write, buffer, lenp, ppos);
+	if (ret || !write)
+		return ret;
+
+	/* Writing -1 has the special meaning "set to max": */
+	if (vl == -1)
+		vl = info->max_vl;
+
+	if (!sve_vl_valid(vl))
+		return -EINVAL;
+
+	set_default_vl(type, find_supported_vector_length(type, vl));
+	return 0;
+}
+
+static struct ctl_table sve_default_vl_table[] = {
+	{
+		.procname	= "sve_default_vector_length",
+		.mode		= 0644,
+		.proc_handler	= vec_proc_do_default_vl,
+		.extra1		= &vl_info[ARM64_VEC_SVE],
+	},
+	{ }
+};
+
+static int __init sve_sysctl_init(void)
+{
+	if (system_supports_sve())
+		if (!register_sysctl("abi", sve_default_vl_table))
+			return -EINVAL;
+
+	return 0;
+}
+
+#else /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
+static int __init sve_sysctl_init(void) { return 0; }
+#endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
+
+#if defined(CONFIG_ARM64_SME) && defined(CONFIG_SYSCTL)
+static struct ctl_table sme_default_vl_table[] = {
+	{
+		.procname	= "sme_default_vector_length",
+		.mode		= 0644,
+		.proc_handler	= vec_proc_do_default_vl,
+		.extra1		= &vl_info[ARM64_VEC_SME],
+	},
+	{ }
+};
+
+static int __init sme_sysctl_init(void)
+{
+	if (system_supports_sme())
+		if (!register_sysctl("abi", sme_default_vl_table))
+			return -EINVAL;
+
+	return 0;
+}
+
+#else /* ! (CONFIG_ARM64_SME && CONFIG_SYSCTL) */
+static int __init sme_sysctl_init(void) { return 0; }
+#endif /* ! (CONFIG_ARM64_SME && CONFIG_SYSCTL) */
+
+#define ZREG(sve_state, vq, n) ((char *)(sve_state) +		\
+	(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+static __uint128_t arm64_cpu_to_le128(__uint128_t x)
+{
+	u64 a = swab64(x);
+	u64 b = swab64(x >> 64);
+
+	return ((__uint128_t)a << 64) | b;
+}
+#else
+static __uint128_t arm64_cpu_to_le128(__uint128_t x)
+{
+	return x;
+}
+#endif
+
+#define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x)
+
+static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst,
+			    unsigned int vq)
+{
+	unsigned int i;
+	__uint128_t *p;
+
+	for (i = 0; i < SVE_NUM_ZREGS; ++i) {
+		p = (__uint128_t *)ZREG(sst, vq, i);
+		*p = arm64_cpu_to_le128(fst->vregs[i]);
+	}
+}
+
+/*
+ * Transfer the FPSIMD state in task->thread.uw.fpsimd_state to
+ * task->thread.sve_state.
+ *
+ * Task can be a non-runnable task, or current.  In the latter case,
+ * the caller must have ownership of the cpu FPSIMD context before calling
+ * this function.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.uw.fpsimd_state must be up to date before calling this
+ * function.
+ */
+static void fpsimd_to_sve(struct task_struct *task)
+{
+	unsigned int vq;
+	void *sst = task->thread.sve_state;
+	struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
+
+	if (!system_supports_sve() && !system_supports_sme())
+		return;
+
+	vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread));
+	__fpsimd_to_sve(sst, fst, vq);
+}
+
+/*
+ * Transfer the SVE state in task->thread.sve_state to
+ * task->thread.uw.fpsimd_state.
+ *
+ * Task can be a non-runnable task, or current.  In the latter case,
+ * the caller must have ownership of the cpu FPSIMD context before calling
+ * this function.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.sve_state must be up to date before calling this function.
+ */
+static void sve_to_fpsimd(struct task_struct *task)
+{
+	unsigned int vq, vl;
+	void const *sst = task->thread.sve_state;
+	struct user_fpsimd_state *fst = &task->thread.uw.fpsimd_state;
+	unsigned int i;
+	__uint128_t const *p;
+
+	if (!system_supports_sve() && !system_supports_sme())
+		return;
+
+	vl = thread_get_cur_vl(&task->thread);
+	vq = sve_vq_from_vl(vl);
+	for (i = 0; i < SVE_NUM_ZREGS; ++i) {
+		p = (__uint128_t const *)ZREG(sst, vq, i);
+		fst->vregs[i] = arm64_le128_to_cpu(*p);
+	}
+}
+
+#ifdef CONFIG_ARM64_SVE
+/*
+ * Call __sve_free() directly only if you know task can't be scheduled
+ * or preempted.
+ */
+static void __sve_free(struct task_struct *task)
+{
+	kfree(task->thread.sve_state);
+	task->thread.sve_state = NULL;
+}
+
+static void sve_free(struct task_struct *task)
+{
+	WARN_ON(test_tsk_thread_flag(task, TIF_SVE));
+
+	__sve_free(task);
+}
+
+/*
+ * Return how many bytes of memory are required to store the full SVE
+ * state for task, given task's currently configured vector length.
+ */
+size_t sve_state_size(struct task_struct const *task)
+{
+	unsigned int vl = 0;
+
+	if (system_supports_sve())
+		vl = task_get_sve_vl(task);
+	if (system_supports_sme())
+		vl = max(vl, task_get_sme_vl(task));
+
+	return SVE_SIG_REGS_SIZE(sve_vq_from_vl(vl));
+}
+
+/*
+ * Ensure that task->thread.sve_state is allocated and sufficiently large.
+ *
+ * This function should be used only in preparation for replacing
+ * task->thread.sve_state with new data.  The memory is always zeroed
+ * here to prevent stale data from showing through: this is done in
+ * the interest of testability and predictability: except in the
+ * do_sve_acc() case, there is no ABI requirement to hide stale data
+ * written previously be task.
+ */
+void sve_alloc(struct task_struct *task, bool flush)
+{
+	if (task->thread.sve_state) {
+		if (flush)
+			memset(task->thread.sve_state, 0,
+			       sve_state_size(task));
+		return;
+	}
+
+	/* This is a small allocation (maximum ~8KB) and Should Not Fail. */
+	task->thread.sve_state =
+		kzalloc(sve_state_size(task), GFP_KERNEL);
+}
+
+
+/*
+ * Force the FPSIMD state shared with SVE to be updated in the SVE state
+ * even if the SVE state is the current active state.
+ *
+ * This should only be called by ptrace.  task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void fpsimd_force_sync_to_sve(struct task_struct *task)
+{
+	fpsimd_to_sve(task);
+}
+
+/*
+ * Ensure that task->thread.sve_state is up to date with respect to
+ * the user task, irrespective of when SVE is in use or not.
+ *
+ * This should only be called by ptrace.  task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void fpsimd_sync_to_sve(struct task_struct *task)
+{
+	if (!test_tsk_thread_flag(task, TIF_SVE) &&
+	    !thread_sm_enabled(&task->thread))
+		fpsimd_to_sve(task);
+}
+
+/*
+ * Ensure that task->thread.uw.fpsimd_state is up to date with respect to
+ * the user task, irrespective of whether SVE is in use or not.
+ *
+ * This should only be called by ptrace.  task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ */
+void sve_sync_to_fpsimd(struct task_struct *task)
+{
+	if (task->thread.fp_type == FP_STATE_SVE)
+		sve_to_fpsimd(task);
+}
+
+/*
+ * Ensure that task->thread.sve_state is up to date with respect to
+ * the task->thread.uw.fpsimd_state.
+ *
+ * This should only be called by ptrace to merge new FPSIMD register
+ * values into a task for which SVE is currently active.
+ * task must be non-runnable.
+ * task->thread.sve_state must point to at least sve_state_size(task)
+ * bytes of allocated kernel memory.
+ * task->thread.uw.fpsimd_state must already have been initialised with
+ * the new FPSIMD register values to be merged in.
+ */
+void sve_sync_from_fpsimd_zeropad(struct task_struct *task)
+{
+	unsigned int vq;
+	void *sst = task->thread.sve_state;
+	struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state;
+
+	if (!test_tsk_thread_flag(task, TIF_SVE) &&
+	    !thread_sm_enabled(&task->thread))
+		return;
+
+	vq = sve_vq_from_vl(thread_get_cur_vl(&task->thread));
+
+	memset(sst, 0, SVE_SIG_REGS_SIZE(vq));
+	__fpsimd_to_sve(sst, fst, vq);
+}
+
+int vec_set_vector_length(struct task_struct *task, enum vec_type type,
+			  unsigned long vl, unsigned long flags)
+{
+	bool free_sme = false;
+
+	if (flags & ~(unsigned long)(PR_SVE_VL_INHERIT |
+				     PR_SVE_SET_VL_ONEXEC))
+		return -EINVAL;
+
+	if (!sve_vl_valid(vl))
+		return -EINVAL;
+
+	/*
+	 * Clamp to the maximum vector length that VL-agnostic code
+	 * can work with.  A flag may be assigned in the future to
+	 * allow setting of larger vector lengths without confusing
+	 * older software.
+	 */
+	if (vl > VL_ARCH_MAX)
+		vl = VL_ARCH_MAX;
+
+	vl = find_supported_vector_length(type, vl);
+
+	if (flags & (PR_SVE_VL_INHERIT |
+		     PR_SVE_SET_VL_ONEXEC))
+		task_set_vl_onexec(task, type, vl);
+	else
+		/* Reset VL to system default on next exec: */
+		task_set_vl_onexec(task, type, 0);
+
+	/* Only actually set the VL if not deferred: */
+	if (flags & PR_SVE_SET_VL_ONEXEC)
+		goto out;
+
+	if (vl == task_get_vl(task, type))
+		goto out;
+
+	/*
+	 * To ensure the FPSIMD bits of the SVE vector registers are preserved,
+	 * write any live register state back to task_struct, and convert to a
+	 * regular FPSIMD thread.
+	 */
+	if (task == current) {
+		get_cpu_fpsimd_context();
+
+		fpsimd_save();
+	}
+
+	fpsimd_flush_task_state(task);
+	if (test_and_clear_tsk_thread_flag(task, TIF_SVE) ||
+	    thread_sm_enabled(&task->thread)) {
+		sve_to_fpsimd(task);
+		task->thread.fp_type = FP_STATE_FPSIMD;
+	}
+
+	if (system_supports_sme()) {
+		if (type == ARM64_VEC_SME ||
+		    !(task->thread.svcr & (SVCR_SM_MASK | SVCR_ZA_MASK))) {
+			/*
+			 * We are changing the SME VL or weren't using
+			 * SME anyway, discard the state and force a
+			 * reallocation.
+			 */
+			task->thread.svcr &= ~(SVCR_SM_MASK |
+					       SVCR_ZA_MASK);
+			clear_tsk_thread_flag(task, TIF_SME);
+			free_sme = true;
+		}
+	}
+
+	if (task == current)
+		put_cpu_fpsimd_context();
+
+	task_set_vl(task, type, vl);
+
+	/*
+	 * Free the changed states if they are not in use, SME will be
+	 * reallocated to the correct size on next use and we just
+	 * allocate SVE now in case it is needed for use in streaming
+	 * mode.
+	 */
+	if (system_supports_sve()) {
+		sve_free(task);
+		sve_alloc(task, true);
+	}
+
+	if (free_sme)
+		sme_free(task);
+
+out:
+	update_tsk_thread_flag(task, vec_vl_inherit_flag(type),
+			       flags & PR_SVE_VL_INHERIT);
+
+	return 0;
+}
+
+/*
+ * Encode the current vector length and flags for return.
+ * This is only required for prctl(): ptrace has separate fields.
+ * SVE and SME use the same bits for _ONEXEC and _INHERIT.
+ *
+ * flags are as for vec_set_vector_length().
+ */
+static int vec_prctl_status(enum vec_type type, unsigned long flags)
+{
+	int ret;
+
+	if (flags & PR_SVE_SET_VL_ONEXEC)
+		ret = task_get_vl_onexec(current, type);
+	else
+		ret = task_get_vl(current, type);
+
+	if (test_thread_flag(vec_vl_inherit_flag(type)))
+		ret |= PR_SVE_VL_INHERIT;
+
+	return ret;
+}
+
+/* PR_SVE_SET_VL */
+int sve_set_current_vl(unsigned long arg)
+{
+	unsigned long vl, flags;
+	int ret;
+
+	vl = arg & PR_SVE_VL_LEN_MASK;
+	flags = arg & ~vl;
+
+	if (!system_supports_sve() || is_compat_task())
+		return -EINVAL;
+
+	ret = vec_set_vector_length(current, ARM64_VEC_SVE, vl, flags);
+	if (ret)
+		return ret;
+
+	return vec_prctl_status(ARM64_VEC_SVE, flags);
+}
+
+/* PR_SVE_GET_VL */
+int sve_get_current_vl(void)
+{
+	if (!system_supports_sve() || is_compat_task())
+		return -EINVAL;
+
+	return vec_prctl_status(ARM64_VEC_SVE, 0);
+}
+
+#ifdef CONFIG_ARM64_SME
+/* PR_SME_SET_VL */
+int sme_set_current_vl(unsigned long arg)
+{
+	unsigned long vl, flags;
+	int ret;
+
+	vl = arg & PR_SME_VL_LEN_MASK;
+	flags = arg & ~vl;
+
+	if (!system_supports_sme() || is_compat_task())
+		return -EINVAL;
+
+	ret = vec_set_vector_length(current, ARM64_VEC_SME, vl, flags);
+	if (ret)
+		return ret;
+
+	return vec_prctl_status(ARM64_VEC_SME, flags);
+}
+
+/* PR_SME_GET_VL */
+int sme_get_current_vl(void)
+{
+	if (!system_supports_sme() || is_compat_task())
+		return -EINVAL;
+
+	return vec_prctl_status(ARM64_VEC_SME, 0);
+}
+#endif /* CONFIG_ARM64_SME */
+
+static void vec_probe_vqs(struct vl_info *info,
+			  DECLARE_BITMAP(map, SVE_VQ_MAX))
+{
+	unsigned int vq, vl;
+
+	bitmap_zero(map, SVE_VQ_MAX);
+
+	for (vq = SVE_VQ_MAX; vq >= SVE_VQ_MIN; --vq) {
+		write_vl(info->type, vq - 1); /* self-syncing */
+
+		switch (info->type) {
+		case ARM64_VEC_SVE:
+			vl = sve_get_vl();
+			break;
+		case ARM64_VEC_SME:
+			vl = sme_get_vl();
+			break;
+		default:
+			vl = 0;
+			break;
+		}
+
+		/* Minimum VL identified? */
+		if (sve_vq_from_vl(vl) > vq)
+			break;
+
+		vq = sve_vq_from_vl(vl); /* skip intervening lengths */
+		set_bit(__vq_to_bit(vq), map);
+	}
+}
+
+/*
+ * Initialise the set of known supported VQs for the boot CPU.
+ * This is called during kernel boot, before secondary CPUs are brought up.
+ */
+void __init vec_init_vq_map(enum vec_type type)
+{
+	struct vl_info *info = &vl_info[type];
+	vec_probe_vqs(info, info->vq_map);
+	bitmap_copy(info->vq_partial_map, info->vq_map, SVE_VQ_MAX);
+}
+
+/*
+ * If we haven't committed to the set of supported VQs yet, filter out
+ * those not supported by the current CPU.
+ * This function is called during the bring-up of early secondary CPUs only.
+ */
+void vec_update_vq_map(enum vec_type type)
+{
+	struct vl_info *info = &vl_info[type];
+	DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
+
+	vec_probe_vqs(info, tmp_map);
+	bitmap_and(info->vq_map, info->vq_map, tmp_map, SVE_VQ_MAX);
+	bitmap_or(info->vq_partial_map, info->vq_partial_map, tmp_map,
+		  SVE_VQ_MAX);
+}
+
+/*
+ * Check whether the current CPU supports all VQs in the committed set.
+ * This function is called during the bring-up of late secondary CPUs only.
+ */
+int vec_verify_vq_map(enum vec_type type)
+{
+	struct vl_info *info = &vl_info[type];
+	DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
+	unsigned long b;
+
+	vec_probe_vqs(info, tmp_map);
+
+	bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX);
+	if (bitmap_intersects(tmp_map, info->vq_map, SVE_VQ_MAX)) {
+		pr_warn("%s: cpu%d: Required vector length(s) missing\n",
+			info->name, smp_processor_id());
+		return -EINVAL;
+	}
+
+	if (!IS_ENABLED(CONFIG_KVM) || !is_hyp_mode_available())
+		return 0;
+
+	/*
+	 * For KVM, it is necessary to ensure that this CPU doesn't
+	 * support any vector length that guests may have probed as
+	 * unsupported.
+	 */
+
+	/* Recover the set of supported VQs: */
+	bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX);
+	/* Find VQs supported that are not globally supported: */
+	bitmap_andnot(tmp_map, tmp_map, info->vq_map, SVE_VQ_MAX);
+
+	/* Find the lowest such VQ, if any: */
+	b = find_last_bit(tmp_map, SVE_VQ_MAX);
+	if (b >= SVE_VQ_MAX)
+		return 0; /* no mismatches */
+
+	/*
+	 * Mismatches above sve_max_virtualisable_vl are fine, since
+	 * no guest is allowed to configure ZCR_EL2.LEN to exceed this:
+	 */
+	if (sve_vl_from_vq(__bit_to_vq(b)) <= info->max_virtualisable_vl) {
+		pr_warn("%s: cpu%d: Unsupported vector length(s) present\n",
+			info->name, smp_processor_id());
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void __init sve_efi_setup(void)
+{
+	int max_vl = 0;
+	int i;
+
+	if (!IS_ENABLED(CONFIG_EFI))
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(vl_info); i++)
+		max_vl = max(vl_info[i].max_vl, max_vl);
+
+	/*
+	 * alloc_percpu() warns and prints a backtrace if this goes wrong.
+	 * This is evidence of a crippled system and we are returning void,
+	 * so no attempt is made to handle this situation here.
+	 */
+	if (!sve_vl_valid(max_vl))
+		goto fail;
+
+	efi_sve_state = __alloc_percpu(
+		SVE_SIG_REGS_SIZE(sve_vq_from_vl(max_vl)), SVE_VQ_BYTES);
+	if (!efi_sve_state)
+		goto fail;
+
+	return;
+
+fail:
+	panic("Cannot allocate percpu memory for EFI SVE save/restore");
+}
+
+/*
+ * Enable SVE for EL1.
+ * Intended for use by the cpufeatures code during CPU boot.
+ */
+void sve_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+{
+	write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_ZEN_EL1EN, CPACR_EL1);
+	isb();
+}
+
+/*
+ * Read the pseudo-ZCR used by cpufeatures to identify the supported SVE
+ * vector length.
+ *
+ * Use only if SVE is present.
+ * This function clobbers the SVE vector length.
+ */
+u64 read_zcr_features(void)
+{
+	/*
+	 * Set the maximum possible VL, and write zeroes to all other
+	 * bits to see if they stick.
+	 */
+	sve_kernel_enable(NULL);
+	write_sysreg_s(ZCR_ELx_LEN_MASK, SYS_ZCR_EL1);
+
+	/* Return LEN value that would be written to get the maximum VL */
+	return sve_vq_from_vl(sve_get_vl()) - 1;
+}
+
+void __init sve_setup(void)
+{
+	struct vl_info *info = &vl_info[ARM64_VEC_SVE];
+	u64 zcr;
+	DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
+	unsigned long b;
+
+	if (!system_supports_sve())
+		return;
+
+	/*
+	 * The SVE architecture mandates support for 128-bit vectors,
+	 * so sve_vq_map must have at least SVE_VQ_MIN set.
+	 * If something went wrong, at least try to patch it up:
+	 */
+	if (WARN_ON(!test_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map)))
+		set_bit(__vq_to_bit(SVE_VQ_MIN), info->vq_map);
+
+	zcr = read_sanitised_ftr_reg(SYS_ZCR_EL1);
+	info->max_vl = sve_vl_from_vq((zcr & ZCR_ELx_LEN_MASK) + 1);
+
+	/*
+	 * Sanity-check that the max VL we determined through CPU features
+	 * corresponds properly to sve_vq_map.  If not, do our best:
+	 */
+	if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SVE,
+								 info->max_vl)))
+		info->max_vl = find_supported_vector_length(ARM64_VEC_SVE,
+							    info->max_vl);
+
+	/*
+	 * For the default VL, pick the maximum supported value <= 64.
+	 * VL == 64 is guaranteed not to grow the signal frame.
+	 */
+	set_sve_default_vl(find_supported_vector_length(ARM64_VEC_SVE, 64));
+
+	bitmap_andnot(tmp_map, info->vq_partial_map, info->vq_map,
+		      SVE_VQ_MAX);
+
+	b = find_last_bit(tmp_map, SVE_VQ_MAX);
+	if (b >= SVE_VQ_MAX)
+		/* No non-virtualisable VLs found */
+		info->max_virtualisable_vl = SVE_VQ_MAX;
+	else if (WARN_ON(b == SVE_VQ_MAX - 1))
+		/* No virtualisable VLs?  This is architecturally forbidden. */
+		info->max_virtualisable_vl = SVE_VQ_MIN;
+	else /* b + 1 < SVE_VQ_MAX */
+		info->max_virtualisable_vl = sve_vl_from_vq(__bit_to_vq(b + 1));
+
+	if (info->max_virtualisable_vl > info->max_vl)
+		info->max_virtualisable_vl = info->max_vl;
+
+	pr_info("%s: maximum available vector length %u bytes per vector\n",
+		info->name, info->max_vl);
+	pr_info("%s: default vector length %u bytes per vector\n",
+		info->name, get_sve_default_vl());
+
+	/* KVM decides whether to support mismatched systems. Just warn here: */
+	if (sve_max_virtualisable_vl() < sve_max_vl())
+		pr_warn("%s: unvirtualisable vector lengths present\n",
+			info->name);
+
+	sve_efi_setup();
+}
+
+/*
+ * Called from the put_task_struct() path, which cannot get here
+ * unless dead_task is really dead and not schedulable.
+ */
+void fpsimd_release_task(struct task_struct *dead_task)
+{
+	__sve_free(dead_task);
+	sme_free(dead_task);
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
+#ifdef CONFIG_ARM64_SME
+
+/*
+ * Ensure that task->thread.sme_state is allocated and sufficiently large.
+ *
+ * This function should be used only in preparation for replacing
+ * task->thread.sme_state with new data.  The memory is always zeroed
+ * here to prevent stale data from showing through: this is done in
+ * the interest of testability and predictability, the architecture
+ * guarantees that when ZA is enabled it will be zeroed.
+ */
+void sme_alloc(struct task_struct *task, bool flush)
+{
+	if (task->thread.sme_state) {
+		if (flush)
+			memset(task->thread.sme_state, 0,
+			       sme_state_size(task));
+		return;
+	}
+
+	/* This could potentially be up to 64K. */
+	task->thread.sme_state =
+		kzalloc(sme_state_size(task), GFP_KERNEL);
+}
+
+static void sme_free(struct task_struct *task)
+{
+	kfree(task->thread.sme_state);
+	task->thread.sme_state = NULL;
+}
+
+void sme_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+{
+	/* Set priority for all PEs to architecturally defined minimum */
+	write_sysreg_s(read_sysreg_s(SYS_SMPRI_EL1) & ~SMPRI_EL1_PRIORITY_MASK,
+		       SYS_SMPRI_EL1);
+
+	/* Allow SME in kernel */
+	write_sysreg(read_sysreg(CPACR_EL1) | CPACR_EL1_SMEN_EL1EN, CPACR_EL1);
+	isb();
+
+	/* Allow EL0 to access TPIDR2 */
+	write_sysreg(read_sysreg(SCTLR_EL1) | SCTLR_ELx_ENTP2, SCTLR_EL1);
+	isb();
+}
+
+/*
+ * This must be called after sme_kernel_enable(), we rely on the
+ * feature table being sorted to ensure this.
+ */
+void sme2_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+{
+	/* Allow use of ZT0 */
+	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_EZT0_MASK,
+		       SYS_SMCR_EL1);
+}
+
+/*
+ * This must be called after sme_kernel_enable(), we rely on the
+ * feature table being sorted to ensure this.
+ */
+void fa64_kernel_enable(const struct arm64_cpu_capabilities *__always_unused p)
+{
+	/* Allow use of FA64 */
+	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_FA64_MASK,
+		       SYS_SMCR_EL1);
+}
+
+/*
+ * Read the pseudo-SMCR used by cpufeatures to identify the supported
+ * vector length.
+ *
+ * Use only if SME is present.
+ * This function clobbers the SME vector length.
+ */
+u64 read_smcr_features(void)
+{
+	sme_kernel_enable(NULL);
+
+	/*
+	 * Set the maximum possible VL.
+	 */
+	write_sysreg_s(read_sysreg_s(SYS_SMCR_EL1) | SMCR_ELx_LEN_MASK,
+		       SYS_SMCR_EL1);
+
+	/* Return LEN value that would be written to get the maximum VL */
+	return sve_vq_from_vl(sme_get_vl()) - 1;
+}
+
+void __init sme_setup(void)
+{
+	struct vl_info *info = &vl_info[ARM64_VEC_SME];
+	u64 smcr;
+	int min_bit;
+
+	if (!system_supports_sme())
+		return;
+
+	/*
+	 * SME doesn't require any particular vector length be
+	 * supported but it does require at least one.  We should have
+	 * disabled the feature entirely while bringing up CPUs but
+	 * let's double check here.
+	 */
+	WARN_ON(bitmap_empty(info->vq_map, SVE_VQ_MAX));
+
+	min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX);
+	info->min_vl = sve_vl_from_vq(__bit_to_vq(min_bit));
+
+	smcr = read_sanitised_ftr_reg(SYS_SMCR_EL1);
+	info->max_vl = sve_vl_from_vq((smcr & SMCR_ELx_LEN_MASK) + 1);
+
+	/*
+	 * Sanity-check that the max VL we determined through CPU features
+	 * corresponds properly to sme_vq_map.  If not, do our best:
+	 */
+	if (WARN_ON(info->max_vl != find_supported_vector_length(ARM64_VEC_SME,
+								 info->max_vl)))
+		info->max_vl = find_supported_vector_length(ARM64_VEC_SME,
+							    info->max_vl);
+
+	WARN_ON(info->min_vl > info->max_vl);
+
+	/*
+	 * For the default VL, pick the maximum supported value <= 32
+	 * (256 bits) if there is one since this is guaranteed not to
+	 * grow the signal frame when in streaming mode, otherwise the
+	 * minimum available VL will be used.
+	 */
+	set_sme_default_vl(find_supported_vector_length(ARM64_VEC_SME, 32));
+
+	pr_info("SME: minimum available vector length %u bytes per vector\n",
+		info->min_vl);
+	pr_info("SME: maximum available vector length %u bytes per vector\n",
+		info->max_vl);
+	pr_info("SME: default vector length %u bytes per vector\n",
+		get_sme_default_vl());
+}
+
+#endif /* CONFIG_ARM64_SME */
+
+static void sve_init_regs(void)
+{
+	/*
+	 * Convert the FPSIMD state to SVE, zeroing all the state that
+	 * is not shared with FPSIMD. If (as is likely) the current
+	 * state is live in the registers then do this there and
+	 * update our metadata for the current task including
+	 * disabling the trap, otherwise update our in-memory copy.
+	 * We are guaranteed to not be in streaming mode, we can only
+	 * take a SVE trap when not in streaming mode and we can't be
+	 * in streaming mode when taking a SME trap.
+	 */
+	if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
+		unsigned long vq_minus_one =
+			sve_vq_from_vl(task_get_sve_vl(current)) - 1;
+		sve_set_vq(vq_minus_one);
+		sve_flush_live(true, vq_minus_one);
+		fpsimd_bind_task_to_cpu();
+	} else {
+		fpsimd_to_sve(current);
+		current->thread.fp_type = FP_STATE_SVE;
+	}
+}
+
+/*
+ * Trapped SVE access
+ *
+ * Storage is allocated for the full SVE state, the current FPSIMD
+ * register contents are migrated across, and the access trap is
+ * disabled.
+ *
+ * TIF_SVE should be clear on entry: otherwise, fpsimd_restore_current_state()
+ * would have disabled the SVE access trap for userspace during
+ * ret_to_user, making an SVE access trap impossible in that case.
+ */
+void do_sve_acc(unsigned long esr, struct pt_regs *regs)
+{
+	/* Even if we chose not to use SVE, the hardware could still trap: */
+	if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) {
+		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+		return;
+	}
+
+	sve_alloc(current, true);
+	if (!current->thread.sve_state) {
+		force_sig(SIGKILL);
+		return;
+	}
+
+	get_cpu_fpsimd_context();
+
+	if (test_and_set_thread_flag(TIF_SVE))
+		WARN_ON(1); /* SVE access shouldn't have trapped */
+
+	/*
+	 * Even if the task can have used streaming mode we can only
+	 * generate SVE access traps in normal SVE mode and
+	 * transitioning out of streaming mode may discard any
+	 * streaming mode state.  Always clear the high bits to avoid
+	 * any potential errors tracking what is properly initialised.
+	 */
+	sve_init_regs();
+
+	put_cpu_fpsimd_context();
+}
+
+/*
+ * Trapped SME access
+ *
+ * Storage is allocated for the full SVE and SME state, the current
+ * FPSIMD register contents are migrated to SVE if SVE is not already
+ * active, and the access trap is disabled.
+ *
+ * TIF_SME should be clear on entry: otherwise, fpsimd_restore_current_state()
+ * would have disabled the SME access trap for userspace during
+ * ret_to_user, making an SME access trap impossible in that case.
+ */
+void do_sme_acc(unsigned long esr, struct pt_regs *regs)
+{
+	/* Even if we chose not to use SME, the hardware could still trap: */
+	if (unlikely(!system_supports_sme()) || WARN_ON(is_compat_task())) {
+		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+		return;
+	}
+
+	/*
+	 * If this not a trap due to SME being disabled then something
+	 * is being used in the wrong mode, report as SIGILL.
+	 */
+	if (ESR_ELx_ISS(esr) != ESR_ELx_SME_ISS_SME_DISABLED) {
+		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+		return;
+	}
+
+	sve_alloc(current, false);
+	sme_alloc(current, true);
+	if (!current->thread.sve_state || !current->thread.sme_state) {
+		force_sig(SIGKILL);
+		return;
+	}
+
+	get_cpu_fpsimd_context();
+
+	/* With TIF_SME userspace shouldn't generate any traps */
+	if (test_and_set_thread_flag(TIF_SME))
+		WARN_ON(1);
+
+	if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) {
+		unsigned long vq_minus_one =
+			sve_vq_from_vl(task_get_sme_vl(current)) - 1;
+		sme_set_vq(vq_minus_one);
+
+		fpsimd_bind_task_to_cpu();
+	}
+
+	put_cpu_fpsimd_context();
+}
+
+/*
+ * Trapped FP/ASIMD access.
+ */
+void do_fpsimd_acc(unsigned long esr, struct pt_regs *regs)
+{
+	/* TODO: implement lazy context saving/restoring */
+	WARN_ON(1);
+}
+
+/*
+ * Raise a SIGFPE for the current process.
+ */
+void do_fpsimd_exc(unsigned long esr, struct pt_regs *regs)
+{
+	unsigned int si_code = FPE_FLTUNK;
+
+	if (esr & ESR_ELx_FP_EXC_TFV) {
+		if (esr & FPEXC_IOF)
+			si_code = FPE_FLTINV;
+		else if (esr & FPEXC_DZF)
+			si_code = FPE_FLTDIV;
+		else if (esr & FPEXC_OFF)
+			si_code = FPE_FLTOVF;
+		else if (esr & FPEXC_UFF)
+			si_code = FPE_FLTUND;
+		else if (esr & FPEXC_IXF)
+			si_code = FPE_FLTRES;
+	}
+
+	send_sig_fault(SIGFPE, si_code,
+		       (void __user *)instruction_pointer(regs),
+		       current);
+}
+
+void fpsimd_thread_switch(struct task_struct *next)
+{
+	bool wrong_task, wrong_cpu;
+
+	if (!system_supports_fpsimd())
+		return;
+
+	__get_cpu_fpsimd_context();
+
+	/* Save unsaved fpsimd state, if any: */
+	fpsimd_save();
+
+	/*
+	 * Fix up TIF_FOREIGN_FPSTATE to correctly describe next's
+	 * state.  For kernel threads, FPSIMD registers are never loaded
+	 * and wrong_task and wrong_cpu will always be true.
+	 */
+	wrong_task = __this_cpu_read(fpsimd_last_state.st) !=
+					&next->thread.uw.fpsimd_state;
+	wrong_cpu = next->thread.fpsimd_cpu != smp_processor_id();
+
+	update_tsk_thread_flag(next, TIF_FOREIGN_FPSTATE,
+			       wrong_task || wrong_cpu);
+
+	__put_cpu_fpsimd_context();
+}
+
+static void fpsimd_flush_thread_vl(enum vec_type type)
+{
+	int vl, supported_vl;
+
+	/*
+	 * Reset the task vector length as required.  This is where we
+	 * ensure that all user tasks have a valid vector length
+	 * configured: no kernel task can become a user task without
+	 * an exec and hence a call to this function.  By the time the
+	 * first call to this function is made, all early hardware
+	 * probing is complete, so __sve_default_vl should be valid.
+	 * If a bug causes this to go wrong, we make some noise and
+	 * try to fudge thread.sve_vl to a safe value here.
+	 */
+	vl = task_get_vl_onexec(current, type);
+	if (!vl)
+		vl = get_default_vl(type);
+
+	if (WARN_ON(!sve_vl_valid(vl)))
+		vl = vl_info[type].min_vl;
+
+	supported_vl = find_supported_vector_length(type, vl);
+	if (WARN_ON(supported_vl != vl))
+		vl = supported_vl;
+
+	task_set_vl(current, type, vl);
+
+	/*
+	 * If the task is not set to inherit, ensure that the vector
+	 * length will be reset by a subsequent exec:
+	 */
+	if (!test_thread_flag(vec_vl_inherit_flag(type)))
+		task_set_vl_onexec(current, type, 0);
+}
+
+void fpsimd_flush_thread(void)
+{
+	void *sve_state = NULL;
+	void *sme_state = NULL;
+
+	if (!system_supports_fpsimd())
+		return;
+
+	get_cpu_fpsimd_context();
+
+	fpsimd_flush_task_state(current);
+	memset(&current->thread.uw.fpsimd_state, 0,
+	       sizeof(current->thread.uw.fpsimd_state));
+
+	if (system_supports_sve()) {
+		clear_thread_flag(TIF_SVE);
+
+		/* Defer kfree() while in atomic context */
+		sve_state = current->thread.sve_state;
+		current->thread.sve_state = NULL;
+
+		fpsimd_flush_thread_vl(ARM64_VEC_SVE);
+	}
+
+	if (system_supports_sme()) {
+		clear_thread_flag(TIF_SME);
+
+		/* Defer kfree() while in atomic context */
+		sme_state = current->thread.sme_state;
+		current->thread.sme_state = NULL;
+
+		fpsimd_flush_thread_vl(ARM64_VEC_SME);
+		current->thread.svcr = 0;
+	}
+
+	current->thread.fp_type = FP_STATE_FPSIMD;
+
+	put_cpu_fpsimd_context();
+	kfree(sve_state);
+	kfree(sme_state);
+}
+
+/*
+ * Save the userland FPSIMD state of 'current' to memory, but only if the state
+ * currently held in the registers does in fact belong to 'current'
+ */
+void fpsimd_preserve_current_state(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+
+	get_cpu_fpsimd_context();
+	fpsimd_save();
+	put_cpu_fpsimd_context();
+}
+
+/*
+ * Like fpsimd_preserve_current_state(), but ensure that
+ * current->thread.uw.fpsimd_state is updated so that it can be copied to
+ * the signal frame.
+ */
+void fpsimd_signal_preserve_current_state(void)
+{
+	fpsimd_preserve_current_state();
+	if (test_thread_flag(TIF_SVE))
+		sve_to_fpsimd(current);
+}
+
+/*
+ * Called by KVM when entering the guest.
+ */
+void fpsimd_kvm_prepare(void)
+{
+	if (!system_supports_sve())
+		return;
+
+	/*
+	 * KVM does not save host SVE state since we can only enter
+	 * the guest from a syscall so the ABI means that only the
+	 * non-saved SVE state needs to be saved.  If we have left
+	 * SVE enabled for performance reasons then update the task
+	 * state to be FPSIMD only.
+	 */
+	get_cpu_fpsimd_context();
+
+	if (test_and_clear_thread_flag(TIF_SVE)) {
+		sve_to_fpsimd(current);
+		current->thread.fp_type = FP_STATE_FPSIMD;
+	}
+
+	put_cpu_fpsimd_context();
+}
+
+/*
+ * Associate current's FPSIMD context with this cpu
+ * The caller must have ownership of the cpu FPSIMD context before calling
+ * this function.
+ */
+static void fpsimd_bind_task_to_cpu(void)
+{
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
+
+	WARN_ON(!system_supports_fpsimd());
+	last->st = &current->thread.uw.fpsimd_state;
+	last->sve_state = current->thread.sve_state;
+	last->sme_state = current->thread.sme_state;
+	last->sve_vl = task_get_sve_vl(current);
+	last->sme_vl = task_get_sme_vl(current);
+	last->svcr = &current->thread.svcr;
+	last->fp_type = &current->thread.fp_type;
+	last->to_save = FP_STATE_CURRENT;
+	current->thread.fpsimd_cpu = smp_processor_id();
+
+	/*
+	 * Toggle SVE and SME trapping for userspace if needed, these
+	 * are serialsied by ret_to_user().
+	 */
+	if (system_supports_sme()) {
+		if (test_thread_flag(TIF_SME))
+			sme_user_enable();
+		else
+			sme_user_disable();
+	}
+
+	if (system_supports_sve()) {
+		if (test_thread_flag(TIF_SVE))
+			sve_user_enable();
+		else
+			sve_user_disable();
+	}
+}
+
+void fpsimd_bind_state_to_cpu(struct cpu_fp_state *state)
+{
+	struct cpu_fp_state *last = this_cpu_ptr(&fpsimd_last_state);
+
+	WARN_ON(!system_supports_fpsimd());
+	WARN_ON(!in_softirq() && !irqs_disabled());
+
+	*last = *state;
+}
+
+/*
+ * Load the userland FPSIMD state of 'current' from memory, but only if the
+ * FPSIMD state already held in the registers is /not/ the most recent FPSIMD
+ * state of 'current'.  This is called when we are preparing to return to
+ * userspace to ensure that userspace sees a good register state.
+ */
+void fpsimd_restore_current_state(void)
+{
+	/*
+	 * For the tasks that were created before we detected the absence of
+	 * FP/SIMD, the TIF_FOREIGN_FPSTATE could be set via fpsimd_thread_switch(),
+	 * e.g, init. This could be then inherited by the children processes.
+	 * If we later detect that the system doesn't support FP/SIMD,
+	 * we must clear the flag for  all the tasks to indicate that the
+	 * FPSTATE is clean (as we can't have one) to avoid looping for ever in
+	 * do_notify_resume().
+	 */
+	if (!system_supports_fpsimd()) {
+		clear_thread_flag(TIF_FOREIGN_FPSTATE);
+		return;
+	}
+
+	get_cpu_fpsimd_context();
+
+	if (test_and_clear_thread_flag(TIF_FOREIGN_FPSTATE)) {
+		task_fpsimd_load();
+		fpsimd_bind_task_to_cpu();
+	}
+
+	put_cpu_fpsimd_context();
+}
+
+/*
+ * Load an updated userland FPSIMD state for 'current' from memory and set the
+ * flag that indicates that the FPSIMD register contents are the most recent
+ * FPSIMD state of 'current'. This is used by the signal code to restore the
+ * register state when returning from a signal handler in FPSIMD only cases,
+ * any SVE context will be discarded.
+ */
+void fpsimd_update_current_state(struct user_fpsimd_state const *state)
+{
+	if (WARN_ON(!system_supports_fpsimd()))
+		return;
+
+	get_cpu_fpsimd_context();
+
+	current->thread.uw.fpsimd_state = *state;
+	if (test_thread_flag(TIF_SVE))
+		fpsimd_to_sve(current);
+
+	task_fpsimd_load();
+	fpsimd_bind_task_to_cpu();
+
+	clear_thread_flag(TIF_FOREIGN_FPSTATE);
+
+	put_cpu_fpsimd_context();
+}
+
+/*
+ * Invalidate live CPU copies of task t's FPSIMD state
+ *
+ * This function may be called with preemption enabled.  The barrier()
+ * ensures that the assignment to fpsimd_cpu is visible to any
+ * preemption/softirq that could race with set_tsk_thread_flag(), so
+ * that TIF_FOREIGN_FPSTATE cannot be spuriously re-cleared.
+ *
+ * The final barrier ensures that TIF_FOREIGN_FPSTATE is seen set by any
+ * subsequent code.
+ */
+void fpsimd_flush_task_state(struct task_struct *t)
+{
+	t->thread.fpsimd_cpu = NR_CPUS;
+	/*
+	 * If we don't support fpsimd, bail out after we have
+	 * reset the fpsimd_cpu for this task and clear the
+	 * FPSTATE.
+	 */
+	if (!system_supports_fpsimd())
+		return;
+	barrier();
+	set_tsk_thread_flag(t, TIF_FOREIGN_FPSTATE);
+
+	barrier();
+}
+
+/*
+ * Invalidate any task's FPSIMD state that is present on this cpu.
+ * The FPSIMD context should be acquired with get_cpu_fpsimd_context()
+ * before calling this function.
+ */
+static void fpsimd_flush_cpu_state(void)
+{
+	WARN_ON(!system_supports_fpsimd());
+	__this_cpu_write(fpsimd_last_state.st, NULL);
+
+	/*
+	 * Leaving streaming mode enabled will cause issues for any kernel
+	 * NEON and leaving streaming mode or ZA enabled may increase power
+	 * consumption.
+	 */
+	if (system_supports_sme())
+		sme_smstop();
+
+	set_thread_flag(TIF_FOREIGN_FPSTATE);
+}
+
+/*
+ * Save the FPSIMD state to memory and invalidate cpu view.
+ * This function must be called with preemption disabled.
+ */
+void fpsimd_save_and_flush_cpu_state(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+	WARN_ON(preemptible());
+	__get_cpu_fpsimd_context();
+	fpsimd_save();
+	fpsimd_flush_cpu_state();
+	__put_cpu_fpsimd_context();
+}
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+
+/*
+ * Kernel-side NEON support functions
+ */
+
+/*
+ * kernel_neon_begin(): obtain the CPU FPSIMD registers for use by the calling
+ * context
+ *
+ * Must not be called unless may_use_simd() returns true.
+ * Task context in the FPSIMD registers is saved back to memory as necessary.
+ *
+ * A matching call to kernel_neon_end() must be made before returning from the
+ * calling context.
+ *
+ * The caller may freely use the FPSIMD registers until kernel_neon_end() is
+ * called.
+ */
+void kernel_neon_begin(void)
+{
+	if (WARN_ON(!system_supports_fpsimd()))
+		return;
+
+	BUG_ON(!may_use_simd());
+
+	get_cpu_fpsimd_context();
+
+	/* Save unsaved fpsimd state, if any: */
+	fpsimd_save();
+
+	/* Invalidate any task state remaining in the fpsimd regs: */
+	fpsimd_flush_cpu_state();
+}
+EXPORT_SYMBOL_GPL(kernel_neon_begin);
+
+/*
+ * kernel_neon_end(): give the CPU FPSIMD registers back to the current task
+ *
+ * Must be called from a context in which kernel_neon_begin() was previously
+ * called, with no call to kernel_neon_end() in the meantime.
+ *
+ * The caller must not use the FPSIMD registers after this function is called,
+ * unless kernel_neon_begin() is called again in the meantime.
+ */
+void kernel_neon_end(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+
+	put_cpu_fpsimd_context();
+}
+EXPORT_SYMBOL_GPL(kernel_neon_end);
+
+#ifdef CONFIG_EFI
+
+static DEFINE_PER_CPU(struct user_fpsimd_state, efi_fpsimd_state);
+static DEFINE_PER_CPU(bool, efi_fpsimd_state_used);
+static DEFINE_PER_CPU(bool, efi_sve_state_used);
+static DEFINE_PER_CPU(bool, efi_sm_state);
+
+/*
+ * EFI runtime services support functions
+ *
+ * The ABI for EFI runtime services allows EFI to use FPSIMD during the call.
+ * This means that for EFI (and only for EFI), we have to assume that FPSIMD
+ * is always used rather than being an optional accelerator.
+ *
+ * These functions provide the necessary support for ensuring FPSIMD
+ * save/restore in the contexts from which EFI is used.
+ *
+ * Do not use them for any other purpose -- if tempted to do so, you are
+ * either doing something wrong or you need to propose some refactoring.
+ */
+
+/*
+ * __efi_fpsimd_begin(): prepare FPSIMD for making an EFI runtime services call
+ */
+void __efi_fpsimd_begin(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+
+	WARN_ON(preemptible());
+
+	if (may_use_simd()) {
+		kernel_neon_begin();
+	} else {
+		/*
+		 * If !efi_sve_state, SVE can't be in use yet and doesn't need
+		 * preserving:
+		 */
+		if (system_supports_sve() && likely(efi_sve_state)) {
+			char *sve_state = this_cpu_ptr(efi_sve_state);
+			bool ffr = true;
+			u64 svcr;
+
+			__this_cpu_write(efi_sve_state_used, true);
+
+			if (system_supports_sme()) {
+				svcr = read_sysreg_s(SYS_SVCR);
+
+				__this_cpu_write(efi_sm_state,
+						 svcr & SVCR_SM_MASK);
+
+				/*
+				 * Unless we have FA64 FFR does not
+				 * exist in streaming mode.
+				 */
+				if (!system_supports_fa64())
+					ffr = !(svcr & SVCR_SM_MASK);
+			}
+
+			sve_save_state(sve_state + sve_ffr_offset(sve_max_vl()),
+				       &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
+				       ffr);
+
+			if (system_supports_sme())
+				sysreg_clear_set_s(SYS_SVCR,
+						   SVCR_SM_MASK, 0);
+
+		} else {
+			fpsimd_save_state(this_cpu_ptr(&efi_fpsimd_state));
+		}
+
+		__this_cpu_write(efi_fpsimd_state_used, true);
+	}
+}
+
+/*
+ * __efi_fpsimd_end(): clean up FPSIMD after an EFI runtime services call
+ */
+void __efi_fpsimd_end(void)
+{
+	if (!system_supports_fpsimd())
+		return;
+
+	if (!__this_cpu_xchg(efi_fpsimd_state_used, false)) {
+		kernel_neon_end();
+	} else {
+		if (system_supports_sve() &&
+		    likely(__this_cpu_read(efi_sve_state_used))) {
+			char const *sve_state = this_cpu_ptr(efi_sve_state);
+			bool ffr = true;
+
+			/*
+			 * Restore streaming mode; EFI calls are
+			 * normal function calls so should not return in
+			 * streaming mode.
+			 */
+			if (system_supports_sme()) {
+				if (__this_cpu_read(efi_sm_state)) {
+					sysreg_clear_set_s(SYS_SVCR,
+							   0,
+							   SVCR_SM_MASK);
+
+					/*
+					 * Unless we have FA64 FFR does not
+					 * exist in streaming mode.
+					 */
+					if (!system_supports_fa64())
+						ffr = false;
+				}
+			}
+
+			sve_load_state(sve_state + sve_ffr_offset(sve_max_vl()),
+				       &this_cpu_ptr(&efi_fpsimd_state)->fpsr,
+				       ffr);
+
+			__this_cpu_write(efi_sve_state_used, false);
+		} else {
+			fpsimd_load_state(this_cpu_ptr(&efi_fpsimd_state));
+		}
+	}
+}
+
+#endif /* CONFIG_EFI */
+
+#endif /* CONFIG_KERNEL_MODE_NEON */
+
+#ifdef CONFIG_CPU_PM
+static int fpsimd_cpu_pm_notifier(struct notifier_block *self,
+				  unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		fpsimd_save_and_flush_cpu_state();
+		break;
+	case CPU_PM_EXIT:
+		break;
+	case CPU_PM_ENTER_FAILED:
+	default:
+		return NOTIFY_DONE;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block fpsimd_cpu_pm_notifier_block = {
+	.notifier_call = fpsimd_cpu_pm_notifier,
+};
+
+static void __init fpsimd_pm_init(void)
+{
+	cpu_pm_register_notifier(&fpsimd_cpu_pm_notifier_block);
+}
+
+#else
+static inline void fpsimd_pm_init(void) { }
+#endif /* CONFIG_CPU_PM */
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int fpsimd_cpu_dead(unsigned int cpu)
+{
+	per_cpu(fpsimd_last_state.st, cpu) = NULL;
+	return 0;
+}
+
+static inline void fpsimd_hotplug_init(void)
+{
+	cpuhp_setup_state_nocalls(CPUHP_ARM64_FPSIMD_DEAD, "arm64/fpsimd:dead",
+				  NULL, fpsimd_cpu_dead);
+}
+
+#else
+static inline void fpsimd_hotplug_init(void) { }
+#endif
+
+/*
+ * FP/SIMD support code initialisation.
+ */
+static int __init fpsimd_init(void)
+{
+	if (cpu_have_named_feature(FP)) {
+		fpsimd_pm_init();
+		fpsimd_hotplug_init();
+	} else {
+		pr_notice("Floating-point is not implemented\n");
+	}
+
+	if (!cpu_have_named_feature(ASIMD))
+		pr_notice("Advanced SIMD is not implemented\n");
+
+
+	sve_sysctl_init();
+	sme_sysctl_init();
+
+	return 0;
+}
+core_initcall(fpsimd_init);
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
new file mode 100644
index 000000000..a650f5e11
--- /dev/null
+++ b/arch/arm64/kernel/ftrace.c
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/kernel/ftrace.c
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+
+#include <linux/ftrace.h>
+#include <linux/module.h>
+#include <linux/swab.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/debug-monitors.h>
+#include <asm/ftrace.h>
+#include <asm/insn.h>
+#include <asm/patching.h>
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+struct fregs_offset {
+	const char *name;
+	int offset;
+};
+
+#define FREGS_OFFSET(n, field)				\
+{							\
+	.name = n,					\
+	.offset = offsetof(struct ftrace_regs, field),	\
+}
+
+static const struct fregs_offset fregs_offsets[] = {
+	FREGS_OFFSET("x0", regs[0]),
+	FREGS_OFFSET("x1", regs[1]),
+	FREGS_OFFSET("x2", regs[2]),
+	FREGS_OFFSET("x3", regs[3]),
+	FREGS_OFFSET("x4", regs[4]),
+	FREGS_OFFSET("x5", regs[5]),
+	FREGS_OFFSET("x6", regs[6]),
+	FREGS_OFFSET("x7", regs[7]),
+	FREGS_OFFSET("x8", regs[8]),
+
+	FREGS_OFFSET("x29", fp),
+	FREGS_OFFSET("x30", lr),
+	FREGS_OFFSET("lr", lr),
+
+	FREGS_OFFSET("sp", sp),
+	FREGS_OFFSET("pc", pc),
+};
+
+int ftrace_regs_query_register_offset(const char *name)
+{
+	for (int i = 0; i < ARRAY_SIZE(fregs_offsets); i++) {
+		const struct fregs_offset *roff = &fregs_offsets[i];
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	}
+
+	return -EINVAL;
+}
+#endif
+
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	/*
+	 * When using mcount, addr is the address of the mcount call
+	 * instruction, and no adjustment is necessary.
+	 */
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS))
+		return addr;
+
+	/*
+	 * When using patchable-function-entry without pre-function NOPS, addr
+	 * is the address of the first NOP after the function entry point.
+	 *
+	 * The compiler has either generated:
+	 *
+	 * addr+00:	func:	NOP		// To be patched to MOV X9, LR
+	 * addr+04:		NOP		// To be patched to BL <caller>
+	 *
+	 * Or:
+	 *
+	 * addr-04:		BTI	C
+	 * addr+00:	func:	NOP		// To be patched to MOV X9, LR
+	 * addr+04:		NOP		// To be patched to BL <caller>
+	 *
+	 * We must adjust addr to the address of the NOP which will be patched
+	 * to `BL <caller>`, which is at `addr + 4` bytes in either case.
+	 *
+	 */
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS))
+		return addr + AARCH64_INSN_SIZE;
+
+	/*
+	 * When using patchable-function-entry with pre-function NOPs, addr is
+	 * the address of the first pre-function NOP.
+	 *
+	 * Starting from an 8-byte aligned base, the compiler has either
+	 * generated:
+	 *
+	 * addr+00:		NOP		// Literal (first 32 bits)
+	 * addr+04:		NOP		// Literal (last 32 bits)
+	 * addr+08:	func:	NOP		// To be patched to MOV X9, LR
+	 * addr+12:		NOP		// To be patched to BL <caller>
+	 *
+	 * Or:
+	 *
+	 * addr+00:		NOP		// Literal (first 32 bits)
+	 * addr+04:		NOP		// Literal (last 32 bits)
+	 * addr+08:	func:	BTI	C
+	 * addr+12:		NOP		// To be patched to MOV X9, LR
+	 * addr+16:		NOP		// To be patched to BL <caller>
+	 *
+	 * We must adjust addr to the address of the NOP which will be patched
+	 * to `BL <caller>`, which is at either addr+12 or addr+16 depending on
+	 * whether there is a BTI.
+	 */
+
+	if (!IS_ALIGNED(addr, sizeof(unsigned long))) {
+		WARN_RATELIMIT(1, "Misaligned patch-site %pS\n",
+			       (void *)(addr + 8));
+		return 0;
+	}
+
+	/* Skip the NOPs placed before the function entry point */
+	addr += 2 * AARCH64_INSN_SIZE;
+
+	/* Skip any BTI */
+	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)) {
+		u32 insn = le32_to_cpu(*(__le32 *)addr);
+
+		if (aarch64_insn_is_bti(insn)) {
+			addr += AARCH64_INSN_SIZE;
+		} else if (insn != aarch64_insn_gen_nop()) {
+			WARN_RATELIMIT(1, "unexpected insn in patch-site %pS: 0x%08x\n",
+				       (void *)addr, insn);
+		}
+	}
+
+	/* Skip the first NOP after function entry */
+	addr += AARCH64_INSN_SIZE;
+
+	return addr;
+}
+
+/*
+ * Replace a single instruction, which may be a branch or NOP.
+ * If @validate == true, a replaced instruction is checked against 'old'.
+ */
+static int ftrace_modify_code(unsigned long pc, u32 old, u32 new,
+			      bool validate)
+{
+	u32 replaced;
+
+	/*
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug were to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with aarch64_insn_*() which uses
+	 * probe_kernel_*(), and make sure what we read is what we expected it
+	 * to be before modifying it.
+	 */
+	if (validate) {
+		if (aarch64_insn_read((void *)pc, &replaced))
+			return -EFAULT;
+
+		if (replaced != old)
+			return -EINVAL;
+	}
+	if (aarch64_insn_patch_text_nosync((void *)pc, new))
+		return -EPERM;
+
+	return 0;
+}
+
+/*
+ * Replace tracer function in ftrace_caller()
+ */
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+	unsigned long pc;
+	u32 new;
+
+	/*
+	 * When using CALL_OPS, the function to call is associated with the
+	 * call site, and we don't have a global function pointer to update.
+	 */
+	if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS))
+		return 0;
+
+	pc = (unsigned long)ftrace_call;
+	new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func,
+					  AARCH64_INSN_BRANCH_LINK);
+
+	return ftrace_modify_code(pc, 0, new, false);
+}
+
+static struct plt_entry *get_ftrace_plt(struct module *mod)
+{
+#ifdef CONFIG_MODULES
+	struct plt_entry *plt = mod->arch.ftrace_trampolines;
+
+	return &plt[FTRACE_PLT_IDX];
+#else
+	return NULL;
+#endif
+}
+
+static bool reachable_by_bl(unsigned long addr, unsigned long pc)
+{
+	long offset = (long)addr - (long)pc;
+
+	return offset >= -SZ_128M && offset < SZ_128M;
+}
+
+/*
+ * Find the address the callsite must branch to in order to reach '*addr'.
+ *
+ * Due to the limited range of 'BL' instructions, modules may be placed too far
+ * away to branch directly and must use a PLT.
+ *
+ * Returns true when '*addr' contains a reachable target address, or has been
+ * modified to contain a PLT address. Returns false otherwise.
+ */
+static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
+				      struct module *mod,
+				      unsigned long *addr)
+{
+	unsigned long pc = rec->ip;
+	struct plt_entry *plt;
+
+	/*
+	 * If a custom trampoline is unreachable, rely on the ftrace_caller
+	 * trampoline which knows how to indirectly reach that trampoline
+	 * through ops->direct_call.
+	 */
+	if (*addr != FTRACE_ADDR && !reachable_by_bl(*addr, pc))
+		*addr = FTRACE_ADDR;
+
+	/*
+	 * When the target is within range of the 'BL' instruction, use 'addr'
+	 * as-is and branch to that directly.
+	 */
+	if (reachable_by_bl(*addr, pc))
+		return true;
+
+	/*
+	 * When the target is outside of the range of a 'BL' instruction, we
+	 * must use a PLT to reach it. We can only place PLTs for modules, and
+	 * only when module PLT support is built-in.
+	 */
+	if (!IS_ENABLED(CONFIG_MODULES))
+		return false;
+
+	/*
+	 * 'mod' is only set at module load time, but if we end up
+	 * dealing with an out-of-range condition, we can assume it
+	 * is due to a module being loaded far away from the kernel.
+	 *
+	 * NOTE: __module_text_address() must be called with preemption
+	 * disabled, but we can rely on ftrace_lock to ensure that 'mod'
+	 * retains its validity throughout the remainder of this code.
+	 */
+	if (!mod) {
+		preempt_disable();
+		mod = __module_text_address(pc);
+		preempt_enable();
+	}
+
+	if (WARN_ON(!mod))
+		return false;
+
+	plt = get_ftrace_plt(mod);
+	if (!plt) {
+		pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
+		return false;
+	}
+
+	*addr = (unsigned long)plt;
+	return true;
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+static const struct ftrace_ops *arm64_rec_get_ops(struct dyn_ftrace *rec)
+{
+	const struct ftrace_ops *ops = NULL;
+
+	if (rec->flags & FTRACE_FL_CALL_OPS_EN) {
+		ops = ftrace_find_unique_ops(rec);
+		WARN_ON_ONCE(!ops);
+	}
+
+	if (!ops)
+		ops = &ftrace_list_ops;
+
+	return ops;
+}
+
+static int ftrace_rec_set_ops(const struct dyn_ftrace *rec,
+			      const struct ftrace_ops *ops)
+{
+	unsigned long literal = ALIGN_DOWN(rec->ip - 12, 8);
+	return aarch64_insn_write_literal_u64((void *)literal,
+					      (unsigned long)ops);
+}
+
+static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec)
+{
+	return ftrace_rec_set_ops(rec, &ftrace_nop_ops);
+}
+
+static int ftrace_rec_update_ops(struct dyn_ftrace *rec)
+{
+	return ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec));
+}
+#else
+static int ftrace_rec_set_nop_ops(struct dyn_ftrace *rec) { return 0; }
+static int ftrace_rec_update_ops(struct dyn_ftrace *rec) { return 0; }
+#endif
+
+/*
+ * Turn on the call to ftrace_caller() in instrumented function
+ */
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long pc = rec->ip;
+	u32 old, new;
+	int ret;
+
+	ret = ftrace_rec_update_ops(rec);
+	if (ret)
+		return ret;
+
+	if (!ftrace_find_callable_addr(rec, NULL, &addr))
+		return -EINVAL;
+
+	old = aarch64_insn_gen_nop();
+	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
+
+	return ftrace_modify_code(pc, old, new, true);
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS
+int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+		       unsigned long addr)
+{
+	unsigned long pc = rec->ip;
+	u32 old, new;
+	int ret;
+
+	ret = ftrace_rec_set_ops(rec, arm64_rec_get_ops(rec));
+	if (ret)
+		return ret;
+
+	if (!ftrace_find_callable_addr(rec, NULL, &old_addr))
+		return -EINVAL;
+	if (!ftrace_find_callable_addr(rec, NULL, &addr))
+		return -EINVAL;
+
+	old = aarch64_insn_gen_branch_imm(pc, old_addr,
+					  AARCH64_INSN_BRANCH_LINK);
+	new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
+
+	return ftrace_modify_code(pc, old, new, true);
+}
+#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+/*
+ * The compiler has inserted two NOPs before the regular function prologue.
+ * All instrumented functions follow the AAPCS, so x0-x8 and x19-x30 are live,
+ * and x9-x18 are free for our use.
+ *
+ * At runtime we want to be able to swing a single NOP <-> BL to enable or
+ * disable the ftrace call. The BL requires us to save the original LR value,
+ * so here we insert a <MOV X9, LR> over the first NOP so the instructions
+ * before the regular prologue are:
+ *
+ * | Compiled | Disabled   | Enabled    |
+ * +----------+------------+------------+
+ * | NOP      | MOV X9, LR | MOV X9, LR |
+ * | NOP      | NOP        | BL <entry> |
+ *
+ * The LR value will be recovered by ftrace_caller, and restored into LR
+ * before returning to the regular function prologue. When a function is not
+ * being traced, the MOV is not harmful given x9 is not live per the AAPCS.
+ *
+ * Note: ftrace_process_locs() has pre-adjusted rec->ip to be the address of
+ * the BL.
+ */
+int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
+{
+	unsigned long pc = rec->ip - AARCH64_INSN_SIZE;
+	u32 old, new;
+	int ret;
+
+	ret = ftrace_rec_set_nop_ops(rec);
+	if (ret)
+		return ret;
+
+	old = aarch64_insn_gen_nop();
+	new = aarch64_insn_gen_move_reg(AARCH64_INSN_REG_9,
+					AARCH64_INSN_REG_LR,
+					AARCH64_INSN_VARIANT_64BIT);
+	return ftrace_modify_code(pc, old, new, true);
+}
+#endif
+
+/*
+ * Turn off the call to ftrace_caller() in instrumented function
+ */
+int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
+		    unsigned long addr)
+{
+	unsigned long pc = rec->ip;
+	u32 old = 0, new;
+	int ret;
+
+	new = aarch64_insn_gen_nop();
+
+	ret = ftrace_rec_set_nop_ops(rec);
+	if (ret)
+		return ret;
+
+	/*
+	 * When using mcount, callsites in modules may have been initalized to
+	 * call an arbitrary module PLT (which redirects to the _mcount stub)
+	 * rather than the ftrace PLT we'll use at runtime (which redirects to
+	 * the ftrace trampoline). We can ignore the old PLT when initializing
+	 * the callsite.
+	 *
+	 * Note: 'mod' is only set at module load time.
+	 */
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_ARGS) && mod)
+		return aarch64_insn_patch_text_nosync((void *)pc, new);
+
+	if (!ftrace_find_callable_addr(rec, mod, &addr))
+		return -EINVAL;
+
+	old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK);
+
+	return ftrace_modify_code(pc, old, new, true);
+}
+
+void arch_ftrace_update_code(int command)
+{
+	command |= FTRACE_MAY_SLEEP;
+	ftrace_modify_all_code(command);
+}
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+/*
+ * function_graph tracer expects ftrace_return_to_handler() to be called
+ * on the way back to parent. For this purpose, this function is called
+ * in _mcount() or ftrace_caller() to replace return address (*parent) on
+ * the call stack to return_to_handler.
+ */
+void prepare_ftrace_return(unsigned long self_addr, unsigned long *parent,
+			   unsigned long frame_pointer)
+{
+	unsigned long return_hooker = (unsigned long)&return_to_handler;
+	unsigned long old;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	/*
+	 * Note:
+	 * No protection against faulting at *parent, which may be seen
+	 * on other archs. It's unlikely on AArch64.
+	 */
+	old = *parent;
+
+	if (!function_graph_enter(old, self_addr, frame_pointer,
+	    (void *)frame_pointer)) {
+		*parent = return_hooker;
+	}
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_ARGS
+void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
+		       struct ftrace_ops *op, struct ftrace_regs *fregs)
+{
+	prepare_ftrace_return(ip, &fregs->lr, fregs->fp);
+}
+#else
+/*
+ * Turn on/off the call to ftrace_graph_caller() in ftrace_caller()
+ * depending on @enable.
+ */
+static int ftrace_modify_graph_caller(bool enable)
+{
+	unsigned long pc = (unsigned long)&ftrace_graph_call;
+	u32 branch, nop;
+
+	branch = aarch64_insn_gen_branch_imm(pc,
+					     (unsigned long)ftrace_graph_caller,
+					     AARCH64_INSN_BRANCH_NOLINK);
+	nop = aarch64_insn_gen_nop();
+
+	if (enable)
+		return ftrace_modify_code(pc, nop, branch, true);
+	else
+		return ftrace_modify_code(pc, branch, nop, true);
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
new file mode 100644
index 000000000..7b236994f
--- /dev/null
+++ b/arch/arm64/kernel/head.S
@@ -0,0 +1,902 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Low-level CPU initialisation
+ * Based on arch/arm/kernel/head.S
+ *
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (C) 2003-2012 ARM Ltd.
+ * Authors:	Catalin Marinas <catalin.marinas@arm.com>
+ *		Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <linux/pgtable.h>
+
+#include <asm/asm_pointer_auth.h>
+#include <asm/assembler.h>
+#include <asm/boot.h>
+#include <asm/bug.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+#include <asm/cputype.h>
+#include <asm/el2_setup.h>
+#include <asm/elf.h>
+#include <asm/image.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/kvm_arm.h>
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/page.h>
+#include <asm/scs.h>
+#include <asm/smp.h>
+#include <asm/sysreg.h>
+#include <asm/thread_info.h>
+#include <asm/virt.h>
+
+#include "efi-header.S"
+
+#if (PAGE_OFFSET & 0x1fffff) != 0
+#error PAGE_OFFSET must be at least 2MB aligned
+#endif
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * The requirements are:
+ *   MMU = off, D-cache = off, I-cache = on or off,
+ *   x0 = physical address to the FDT blob.
+ *
+ * Note that the callee-saved registers are used for storing variables
+ * that are useful before the MMU is enabled. The allocations are described
+ * in the entry routines.
+ */
+	__HEAD
+	/*
+	 * DO NOT MODIFY. Image header expected by Linux boot-loaders.
+	 */
+	efi_signature_nop			// special NOP to identity as PE/COFF executable
+	b	primary_entry			// branch to kernel start, magic
+	.quad	0				// Image load offset from start of RAM, little-endian
+	le64sym	_kernel_size_le			// Effective size of kernel image, little-endian
+	le64sym	_kernel_flags_le		// Informative flags, little-endian
+	.quad	0				// reserved
+	.quad	0				// reserved
+	.quad	0				// reserved
+	.ascii	ARM64_IMAGE_MAGIC		// Magic number
+	.long	.Lpe_header_offset		// Offset to the PE header.
+
+	__EFI_PE_HEADER
+
+	.section ".idmap.text","a"
+
+	/*
+	 * The following callee saved general purpose registers are used on the
+	 * primary lowlevel boot path:
+	 *
+	 *  Register   Scope                      Purpose
+	 *  x19        primary_entry() .. start_kernel()        whether we entered with the MMU on
+	 *  x20        primary_entry() .. __primary_switch()    CPU boot mode
+	 *  x21        primary_entry() .. start_kernel()        FDT pointer passed at boot in x0
+	 *  x22        create_idmap() .. start_kernel()         ID map VA of the DT blob
+	 *  x23        primary_entry() .. start_kernel()        physical misalignment/KASLR offset
+	 *  x24        __primary_switch()                       linear map KASLR seed
+	 *  x25        primary_entry() .. start_kernel()        supported VA size
+	 *  x28        create_idmap()                           callee preserved temp register
+	 */
+SYM_CODE_START(primary_entry)
+	bl	record_mmu_state
+	bl	preserve_boot_args
+	bl	create_idmap
+
+	/*
+	 * If we entered with the MMU and caches on, clean the ID mapped part
+	 * of the primary boot code to the PoC so we can safely execute it with
+	 * the MMU off.
+	 */
+	cbz	x19, 0f
+	adrp	x0, __idmap_text_start
+	adr_l	x1, __idmap_text_end
+	adr_l	x2, dcache_clean_poc
+	blr	x2
+0:	mov	x0, x19
+	bl	init_kernel_el			// w0=cpu_boot_mode
+	mov	x20, x0
+
+	/*
+	 * The following calls CPU setup code, see arch/arm64/mm/proc.S for
+	 * details.
+	 * On return, the CPU will be ready for the MMU to be turned on and
+	 * the TCR will have been set.
+	 */
+#if VA_BITS > 48
+	mrs_s	x0, SYS_ID_AA64MMFR2_EL1
+	tst	x0, ID_AA64MMFR2_EL1_VARange_MASK
+	mov	x0, #VA_BITS
+	mov	x25, #VA_BITS_MIN
+	csel	x25, x25, x0, eq
+	mov	x0, x25
+#endif
+	bl	__cpu_setup			// initialise processor
+	b	__primary_switch
+SYM_CODE_END(primary_entry)
+
+	__INIT
+SYM_CODE_START_LOCAL(record_mmu_state)
+	mrs	x19, CurrentEL
+	cmp	x19, #CurrentEL_EL2
+	mrs	x19, sctlr_el1
+	b.ne	0f
+	mrs	x19, sctlr_el2
+0:
+CPU_LE( tbnz	x19, #SCTLR_ELx_EE_SHIFT, 1f	)
+CPU_BE( tbz	x19, #SCTLR_ELx_EE_SHIFT, 1f	)
+	tst	x19, #SCTLR_ELx_C		// Z := (C == 0)
+	and	x19, x19, #SCTLR_ELx_M		// isolate M bit
+	csel	x19, xzr, x19, eq		// clear x19 if Z
+	ret
+
+	/*
+	 * Set the correct endianness early so all memory accesses issued
+	 * before init_kernel_el() occur in the correct byte order. Note that
+	 * this means the MMU must be disabled, or the active ID map will end
+	 * up getting interpreted with the wrong byte order.
+	 */
+1:	eor	x19, x19, #SCTLR_ELx_EE
+	bic	x19, x19, #SCTLR_ELx_M
+	b.ne	2f
+	pre_disable_mmu_workaround
+	msr	sctlr_el2, x19
+	b	3f
+2:	pre_disable_mmu_workaround
+	msr	sctlr_el1, x19
+3:	isb
+	mov	x19, xzr
+	ret
+SYM_CODE_END(record_mmu_state)
+
+/*
+ * Preserve the arguments passed by the bootloader in x0 .. x3
+ */
+SYM_CODE_START_LOCAL(preserve_boot_args)
+	mov	x21, x0				// x21=FDT
+
+	adr_l	x0, boot_args			// record the contents of
+	stp	x21, x1, [x0]			// x0 .. x3 at kernel entry
+	stp	x2, x3, [x0, #16]
+
+	cbnz	x19, 0f				// skip cache invalidation if MMU is on
+	dmb	sy				// needed before dc ivac with
+						// MMU off
+
+	add	x1, x0, #0x20			// 4 x 8 bytes
+	b	dcache_inval_poc		// tail call
+0:	str_l   x19, mmu_enabled_at_boot, x0
+	ret
+SYM_CODE_END(preserve_boot_args)
+
+SYM_FUNC_START_LOCAL(clear_page_tables)
+	/*
+	 * Clear the init page tables.
+	 */
+	adrp	x0, init_pg_dir
+	adrp	x1, init_pg_end
+	sub	x2, x1, x0
+	mov	x1, xzr
+	b	__pi_memset			// tail call
+SYM_FUNC_END(clear_page_tables)
+
+/*
+ * Macro to populate page table entries, these entries can be pointers to the next level
+ * or last level entries pointing to physical memory.
+ *
+ *	tbl:	page table address
+ *	rtbl:	pointer to page table or physical memory
+ *	index:	start index to write
+ *	eindex:	end index to write - [index, eindex] written to
+ *	flags:	flags for pagetable entry to or in
+ *	inc:	increment to rtbl between each entry
+ *	tmp1:	temporary variable
+ *
+ * Preserves:	tbl, eindex, flags, inc
+ * Corrupts:	index, tmp1
+ * Returns:	rtbl
+ */
+	.macro populate_entries, tbl, rtbl, index, eindex, flags, inc, tmp1
+.Lpe\@:	phys_to_pte \tmp1, \rtbl
+	orr	\tmp1, \tmp1, \flags	// tmp1 = table entry
+	str	\tmp1, [\tbl, \index, lsl #3]
+	add	\rtbl, \rtbl, \inc	// rtbl = pa next level
+	add	\index, \index, #1
+	cmp	\index, \eindex
+	b.ls	.Lpe\@
+	.endm
+
+/*
+ * Compute indices of table entries from virtual address range. If multiple entries
+ * were needed in the previous page table level then the next page table level is assumed
+ * to be composed of multiple pages. (This effectively scales the end index).
+ *
+ *	vstart:	virtual address of start of range
+ *	vend:	virtual address of end of range - we map [vstart, vend]
+ *	shift:	shift used to transform virtual address into index
+ *	order:  #imm 2log(number of entries in page table)
+ *	istart:	index in table corresponding to vstart
+ *	iend:	index in table corresponding to vend
+ *	count:	On entry: how many extra entries were required in previous level, scales
+ *			  our end index.
+ *		On exit: returns how many extra entries required for next page table level
+ *
+ * Preserves:	vstart, vend
+ * Returns:	istart, iend, count
+ */
+	.macro compute_indices, vstart, vend, shift, order, istart, iend, count
+	ubfx	\istart, \vstart, \shift, \order
+	ubfx	\iend, \vend, \shift, \order
+	add	\iend, \iend, \count, lsl \order
+	sub	\count, \iend, \istart
+	.endm
+
+/*
+ * Map memory for specified virtual address range. Each level of page table needed supports
+ * multiple entries. If a level requires n entries the next page table level is assumed to be
+ * formed from n pages.
+ *
+ *	tbl:	location of page table
+ *	rtbl:	address to be used for first level page table entry (typically tbl + PAGE_SIZE)
+ *	vstart:	virtual address of start of range
+ *	vend:	virtual address of end of range - we map [vstart, vend - 1]
+ *	flags:	flags to use to map last level entries
+ *	phys:	physical address corresponding to vstart - physical memory is contiguous
+ *	order:  #imm 2log(number of entries in PGD table)
+ *
+ * If extra_shift is set, an extra level will be populated if the end address does
+ * not fit in 'extra_shift' bits. This assumes vend is in the TTBR0 range.
+ *
+ * Temporaries:	istart, iend, tmp, count, sv - these need to be different registers
+ * Preserves:	vstart, flags
+ * Corrupts:	tbl, rtbl, vend, istart, iend, tmp, count, sv
+ */
+	.macro map_memory, tbl, rtbl, vstart, vend, flags, phys, order, istart, iend, tmp, count, sv, extra_shift
+	sub \vend, \vend, #1
+	add \rtbl, \tbl, #PAGE_SIZE
+	mov \count, #0
+
+	.ifnb	\extra_shift
+	tst	\vend, #~((1 << (\extra_shift)) - 1)
+	b.eq	.L_\@
+	compute_indices \vstart, \vend, #\extra_shift, #(PAGE_SHIFT - 3), \istart, \iend, \count
+	mov \sv, \rtbl
+	populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
+	mov \tbl, \sv
+	.endif
+.L_\@:
+	compute_indices \vstart, \vend, #PGDIR_SHIFT, #\order, \istart, \iend, \count
+	mov \sv, \rtbl
+	populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
+	mov \tbl, \sv
+
+#if SWAPPER_PGTABLE_LEVELS > 3
+	compute_indices \vstart, \vend, #PUD_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
+	mov \sv, \rtbl
+	populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
+	mov \tbl, \sv
+#endif
+
+#if SWAPPER_PGTABLE_LEVELS > 2
+	compute_indices \vstart, \vend, #SWAPPER_TABLE_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
+	mov \sv, \rtbl
+	populate_entries \tbl, \rtbl, \istart, \iend, #PMD_TYPE_TABLE, #PAGE_SIZE, \tmp
+	mov \tbl, \sv
+#endif
+
+	compute_indices \vstart, \vend, #SWAPPER_BLOCK_SHIFT, #(PAGE_SHIFT - 3), \istart, \iend, \count
+	bic \rtbl, \phys, #SWAPPER_BLOCK_SIZE - 1
+	populate_entries \tbl, \rtbl, \istart, \iend, \flags, #SWAPPER_BLOCK_SIZE, \tmp
+	.endm
+
+/*
+ * Remap a subregion created with the map_memory macro with modified attributes
+ * or output address. The entire remapped region must have been covered in the
+ * invocation of map_memory.
+ *
+ * x0: last level table address (returned in first argument to map_memory)
+ * x1: start VA of the existing mapping
+ * x2: start VA of the region to update
+ * x3: end VA of the region to update (exclusive)
+ * x4: start PA associated with the region to update
+ * x5: attributes to set on the updated region
+ * x6: order of the last level mappings
+ */
+SYM_FUNC_START_LOCAL(remap_region)
+	sub	x3, x3, #1		// make end inclusive
+
+	// Get the index offset for the start of the last level table
+	lsr	x1, x1, x6
+	bfi	x1, xzr, #0, #PAGE_SHIFT - 3
+
+	// Derive the start and end indexes into the last level table
+	// associated with the provided region
+	lsr	x2, x2, x6
+	lsr	x3, x3, x6
+	sub	x2, x2, x1
+	sub	x3, x3, x1
+
+	mov	x1, #1
+	lsl	x6, x1, x6		// block size at this level
+
+	populate_entries x0, x4, x2, x3, x5, x6, x7
+	ret
+SYM_FUNC_END(remap_region)
+
+SYM_FUNC_START_LOCAL(create_idmap)
+	mov	x28, lr
+	/*
+	 * The ID map carries a 1:1 mapping of the physical address range
+	 * covered by the loaded image, which could be anywhere in DRAM. This
+	 * means that the required size of the VA (== PA) space is decided at
+	 * boot time, and could be more than the configured size of the VA
+	 * space for ordinary kernel and user space mappings.
+	 *
+	 * There are three cases to consider here:
+	 * - 39 <= VA_BITS < 48, and the ID map needs up to 48 VA bits to cover
+	 *   the placement of the image. In this case, we configure one extra
+	 *   level of translation on the fly for the ID map only. (This case
+	 *   also covers 42-bit VA/52-bit PA on 64k pages).
+	 *
+	 * - VA_BITS == 48, and the ID map needs more than 48 VA bits. This can
+	 *   only happen when using 64k pages, in which case we need to extend
+	 *   the root level table rather than add a level. Note that we can
+	 *   treat this case as 'always extended' as long as we take care not
+	 *   to program an unsupported T0SZ value into the TCR register.
+	 *
+	 * - Combinations that would require two additional levels of
+	 *   translation are not supported, e.g., VA_BITS==36 on 16k pages, or
+	 *   VA_BITS==39/4k pages with 5-level paging, where the input address
+	 *   requires more than 47 or 48 bits, respectively.
+	 */
+#if (VA_BITS < 48)
+#define IDMAP_PGD_ORDER	(VA_BITS - PGDIR_SHIFT)
+#define EXTRA_SHIFT	(PGDIR_SHIFT + PAGE_SHIFT - 3)
+
+	/*
+	 * If VA_BITS < 48, we have to configure an additional table level.
+	 * First, we have to verify our assumption that the current value of
+	 * VA_BITS was chosen such that all translation levels are fully
+	 * utilised, and that lowering T0SZ will always result in an additional
+	 * translation level to be configured.
+	 */
+#if VA_BITS != EXTRA_SHIFT
+#error "Mismatch between VA_BITS and page size/number of translation levels"
+#endif
+#else
+#define IDMAP_PGD_ORDER	(PHYS_MASK_SHIFT - PGDIR_SHIFT)
+#define EXTRA_SHIFT
+	/*
+	 * If VA_BITS == 48, we don't have to configure an additional
+	 * translation level, but the top-level table has more entries.
+	 */
+#endif
+	adrp	x0, init_idmap_pg_dir
+	adrp	x3, _text
+	adrp	x6, _end + MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE
+	mov_q	x7, SWAPPER_RX_MMUFLAGS
+
+	map_memory x0, x1, x3, x6, x7, x3, IDMAP_PGD_ORDER, x10, x11, x12, x13, x14, EXTRA_SHIFT
+
+	/* Remap the kernel page tables r/w in the ID map */
+	adrp	x1, _text
+	adrp	x2, init_pg_dir
+	adrp	x3, init_pg_end
+	bic	x4, x2, #SWAPPER_BLOCK_SIZE - 1
+	mov_q	x5, SWAPPER_RW_MMUFLAGS
+	mov	x6, #SWAPPER_BLOCK_SHIFT
+	bl	remap_region
+
+	/* Remap the FDT after the kernel image */
+	adrp	x1, _text
+	adrp	x22, _end + SWAPPER_BLOCK_SIZE
+	bic	x2, x22, #SWAPPER_BLOCK_SIZE - 1
+	bfi	x22, x21, #0, #SWAPPER_BLOCK_SHIFT		// remapped FDT address
+	add	x3, x2, #MAX_FDT_SIZE + SWAPPER_BLOCK_SIZE
+	bic	x4, x21, #SWAPPER_BLOCK_SIZE - 1
+	mov_q	x5, SWAPPER_RW_MMUFLAGS
+	mov	x6, #SWAPPER_BLOCK_SHIFT
+	bl	remap_region
+
+	/*
+	 * Since the page tables have been populated with non-cacheable
+	 * accesses (MMU disabled), invalidate those tables again to
+	 * remove any speculatively loaded cache lines.
+	 */
+	cbnz	x19, 0f				// skip cache invalidation if MMU is on
+	dmb	sy
+
+	adrp	x0, init_idmap_pg_dir
+	adrp	x1, init_idmap_pg_end
+	bl	dcache_inval_poc
+0:	ret	x28
+SYM_FUNC_END(create_idmap)
+
+SYM_FUNC_START_LOCAL(create_kernel_mapping)
+	adrp	x0, init_pg_dir
+	mov_q	x5, KIMAGE_VADDR		// compile time __va(_text)
+#ifdef CONFIG_RELOCATABLE
+	add	x5, x5, x23			// add KASLR displacement
+#endif
+	adrp	x6, _end			// runtime __pa(_end)
+	adrp	x3, _text			// runtime __pa(_text)
+	sub	x6, x6, x3			// _end - _text
+	add	x6, x6, x5			// runtime __va(_end)
+	mov_q	x7, SWAPPER_RW_MMUFLAGS
+
+	map_memory x0, x1, x5, x6, x7, x3, (VA_BITS - PGDIR_SHIFT), x10, x11, x12, x13, x14
+
+	dsb	ishst				// sync with page table walker
+	ret
+SYM_FUNC_END(create_kernel_mapping)
+
+	/*
+	 * Initialize CPU registers with task-specific and cpu-specific context.
+	 *
+	 * Create a final frame record at task_pt_regs(current)->stackframe, so
+	 * that the unwinder can identify the final frame record of any task by
+	 * its location in the task stack. We reserve the entire pt_regs space
+	 * for consistency with user tasks and kthreads.
+	 */
+	.macro	init_cpu_task tsk, tmp1, tmp2
+	msr	sp_el0, \tsk
+
+	ldr	\tmp1, [\tsk, #TSK_STACK]
+	add	sp, \tmp1, #THREAD_SIZE
+	sub	sp, sp, #PT_REGS_SIZE
+
+	stp	xzr, xzr, [sp, #S_STACKFRAME]
+	add	x29, sp, #S_STACKFRAME
+
+	scs_load_current
+
+	adr_l	\tmp1, __per_cpu_offset
+	ldr	w\tmp2, [\tsk, #TSK_TI_CPU]
+	ldr	\tmp1, [\tmp1, \tmp2, lsl #3]
+	set_this_cpu_offset \tmp1
+	.endm
+
+/*
+ * The following fragment of code is executed with the MMU enabled.
+ *
+ *   x0 = __pa(KERNEL_START)
+ */
+SYM_FUNC_START_LOCAL(__primary_switched)
+	adr_l	x4, init_task
+	init_cpu_task x4, x5, x6
+
+	adr_l	x8, vectors			// load VBAR_EL1 with virtual
+	msr	vbar_el1, x8			// vector table address
+	isb
+
+	stp	x29, x30, [sp, #-16]!
+	mov	x29, sp
+
+	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
+
+	ldr_l	x4, kimage_vaddr		// Save the offset between
+	sub	x4, x4, x0			// the kernel virtual and
+	str_l	x4, kimage_voffset, x5		// physical mappings
+
+	mov	x0, x20
+	bl	set_cpu_boot_mode_flag
+
+	// Clear BSS
+	adr_l	x0, __bss_start
+	mov	x1, xzr
+	adr_l	x2, __bss_stop
+	sub	x2, x2, x0
+	bl	__pi_memset
+	dsb	ishst				// Make zero page visible to PTW
+
+#if VA_BITS > 48
+	adr_l	x8, vabits_actual		// Set this early so KASAN early init
+	str	x25, [x8]			// ... observes the correct value
+	dc	civac, x8			// Make visible to booting secondaries
+#endif
+
+#ifdef CONFIG_RANDOMIZE_BASE
+	adrp	x5, memstart_offset_seed	// Save KASLR linear map seed
+	strh	w24, [x5, :lo12:memstart_offset_seed]
+#endif
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+	bl	kasan_early_init
+#endif
+	mov	x0, x21				// pass FDT address in x0
+	bl	early_fdt_map			// Try mapping the FDT early
+	mov	x0, x20				// pass the full boot status
+	bl	init_feature_override		// Parse cpu feature overrides
+#ifdef CONFIG_UNWIND_PATCH_PAC_INTO_SCS
+	bl	scs_patch_vmlinux
+#endif
+	mov	x0, x20
+	bl	finalise_el2			// Prefer VHE if possible
+	ldp	x29, x30, [sp], #16
+	bl	start_kernel
+	ASM_BUG()
+SYM_FUNC_END(__primary_switched)
+
+/*
+ * end early head section, begin head code that is also used for
+ * hotplug and needs to have the same protections as the text region
+ */
+	.section ".idmap.text","a"
+
+/*
+ * Starting from EL2 or EL1, configure the CPU to execute at the highest
+ * reachable EL supported by the kernel in a chosen default state. If dropping
+ * from EL2 to EL1, configure EL2 before configuring EL1.
+ *
+ * Since we cannot always rely on ERET synchronizing writes to sysregs (e.g. if
+ * SCTLR_ELx.EOS is clear), we place an ISB prior to ERET.
+ *
+ * Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x0 if
+ * booted in EL1 or EL2 respectively, with the top 32 bits containing
+ * potential context flags. These flags are *not* stored in __boot_cpu_mode.
+ *
+ * x0: whether we are being called from the primary boot path with the MMU on
+ */
+SYM_FUNC_START(init_kernel_el)
+	mrs	x1, CurrentEL
+	cmp	x1, #CurrentEL_EL2
+	b.eq	init_el2
+
+SYM_INNER_LABEL(init_el1, SYM_L_LOCAL)
+	mov_q	x0, INIT_SCTLR_EL1_MMU_OFF
+	pre_disable_mmu_workaround
+	msr	sctlr_el1, x0
+	isb
+	mov_q	x0, INIT_PSTATE_EL1
+	msr	spsr_el1, x0
+	msr	elr_el1, lr
+	mov	w0, #BOOT_CPU_MODE_EL1
+	eret
+
+SYM_INNER_LABEL(init_el2, SYM_L_LOCAL)
+	msr	elr_el2, lr
+
+	// clean all HYP code to the PoC if we booted at EL2 with the MMU on
+	cbz	x0, 0f
+	adrp	x0, __hyp_idmap_text_start
+	adr_l	x1, __hyp_text_end
+	adr_l	x2, dcache_clean_poc
+	blr	x2
+0:
+	mov_q	x0, HCR_HOST_NVHE_FLAGS
+	msr	hcr_el2, x0
+	isb
+
+	init_el2_state
+
+	/* Hypervisor stub */
+	adr_l	x0, __hyp_stub_vectors
+	msr	vbar_el2, x0
+	isb
+
+	mov_q	x1, INIT_SCTLR_EL1_MMU_OFF
+
+	/*
+	 * Fruity CPUs seem to have HCR_EL2.E2H set to RES1,
+	 * making it impossible to start in nVHE mode. Is that
+	 * compliant with the architecture? Absolutely not!
+	 */
+	mrs	x0, hcr_el2
+	and	x0, x0, #HCR_E2H
+	cbz	x0, 1f
+
+	/* Set a sane SCTLR_EL1, the VHE way */
+	pre_disable_mmu_workaround
+	msr_s	SYS_SCTLR_EL12, x1
+	mov	x2, #BOOT_CPU_FLAG_E2H
+	b	2f
+
+1:
+	pre_disable_mmu_workaround
+	msr	sctlr_el1, x1
+	mov	x2, xzr
+2:
+	__init_el2_nvhe_prepare_eret
+
+	mov	w0, #BOOT_CPU_MODE_EL2
+	orr	x0, x0, x2
+	eret
+SYM_FUNC_END(init_kernel_el)
+
+	/*
+	 * This provides a "holding pen" for platforms to hold all secondary
+	 * cores are held until we're ready for them to initialise.
+	 */
+SYM_FUNC_START(secondary_holding_pen)
+	mov	x0, xzr
+	bl	init_kernel_el			// w0=cpu_boot_mode
+	mrs	x2, mpidr_el1
+	mov_q	x1, MPIDR_HWID_BITMASK
+	and	x2, x2, x1
+	adr_l	x3, secondary_holding_pen_release
+pen:	ldr	x4, [x3]
+	cmp	x4, x2
+	b.eq	secondary_startup
+	wfe
+	b	pen
+SYM_FUNC_END(secondary_holding_pen)
+
+	/*
+	 * Secondary entry point that jumps straight into the kernel. Only to
+	 * be used where CPUs are brought online dynamically by the kernel.
+	 */
+SYM_FUNC_START(secondary_entry)
+	mov	x0, xzr
+	bl	init_kernel_el			// w0=cpu_boot_mode
+	b	secondary_startup
+SYM_FUNC_END(secondary_entry)
+
+SYM_FUNC_START_LOCAL(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 */
+	mov	x20, x0				// preserve boot mode
+	bl	__cpu_secondary_check52bitva
+#if VA_BITS > 48
+	ldr_l	x0, vabits_actual
+#endif
+	bl	__cpu_setup			// initialise processor
+	adrp	x1, swapper_pg_dir
+	adrp	x2, idmap_pg_dir
+	bl	__enable_mmu
+	ldr	x8, =__secondary_switched
+	br	x8
+SYM_FUNC_END(secondary_startup)
+
+	.text
+SYM_FUNC_START_LOCAL(__secondary_switched)
+	mov	x0, x20
+	bl	set_cpu_boot_mode_flag
+
+	mov	x0, x20
+	bl	finalise_el2
+
+	str_l	xzr, __early_cpu_boot_status, x3
+	adr_l	x5, vectors
+	msr	vbar_el1, x5
+	isb
+
+	adr_l	x0, secondary_data
+	ldr	x2, [x0, #CPU_BOOT_TASK]
+	cbz	x2, __secondary_too_slow
+
+	init_cpu_task x2, x1, x3
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+	ptrauth_keys_init_cpu x2, x3, x4, x5
+#endif
+
+	bl	secondary_start_kernel
+	ASM_BUG()
+SYM_FUNC_END(__secondary_switched)
+
+SYM_FUNC_START_LOCAL(__secondary_too_slow)
+	wfe
+	wfi
+	b	__secondary_too_slow
+SYM_FUNC_END(__secondary_too_slow)
+
+/*
+ * Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
+ * in w0. See arch/arm64/include/asm/virt.h for more info.
+ */
+SYM_FUNC_START_LOCAL(set_cpu_boot_mode_flag)
+	adr_l	x1, __boot_cpu_mode
+	cmp	w0, #BOOT_CPU_MODE_EL2
+	b.ne	1f
+	add	x1, x1, #4
+1:	str	w0, [x1]			// Save CPU boot mode
+	ret
+SYM_FUNC_END(set_cpu_boot_mode_flag)
+
+/*
+ * The booting CPU updates the failed status @__early_cpu_boot_status,
+ * with MMU turned off.
+ *
+ * update_early_cpu_boot_status tmp, status
+ *  - Corrupts tmp1, tmp2
+ *  - Writes 'status' to __early_cpu_boot_status and makes sure
+ *    it is committed to memory.
+ */
+
+	.macro	update_early_cpu_boot_status status, tmp1, tmp2
+	mov	\tmp2, #\status
+	adr_l	\tmp1, __early_cpu_boot_status
+	str	\tmp2, [\tmp1]
+	dmb	sy
+	dc	ivac, \tmp1			// Invalidate potentially stale cache line
+	.endm
+
+/*
+ * Enable the MMU.
+ *
+ *  x0  = SCTLR_EL1 value for turning on the MMU.
+ *  x1  = TTBR1_EL1 value
+ *  x2  = ID map root table address
+ *
+ * Returns to the caller via x30/lr. This requires the caller to be covered
+ * by the .idmap.text section.
+ *
+ * Checks if the selected granule size is supported by the CPU.
+ * If it isn't, park the CPU
+ */
+	.section ".idmap.text","a"
+SYM_FUNC_START(__enable_mmu)
+	mrs	x3, ID_AA64MMFR0_EL1
+	ubfx	x3, x3, #ID_AA64MMFR0_EL1_TGRAN_SHIFT, 4
+	cmp     x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MIN
+	b.lt    __no_granule_support
+	cmp     x3, #ID_AA64MMFR0_EL1_TGRAN_SUPPORTED_MAX
+	b.gt    __no_granule_support
+	phys_to_ttbr x2, x2
+	msr	ttbr0_el1, x2			// load TTBR0
+	load_ttbr1 x1, x1, x3
+
+	set_sctlr_el1	x0
+
+	ret
+SYM_FUNC_END(__enable_mmu)
+
+SYM_FUNC_START(__cpu_secondary_check52bitva)
+#if VA_BITS > 48
+	ldr_l	x0, vabits_actual
+	cmp	x0, #52
+	b.ne	2f
+
+	mrs_s	x0, SYS_ID_AA64MMFR2_EL1
+	and	x0, x0, ID_AA64MMFR2_EL1_VARange_MASK
+	cbnz	x0, 2f
+
+	update_early_cpu_boot_status \
+		CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_52_BIT_VA, x0, x1
+1:	wfe
+	wfi
+	b	1b
+
+#endif
+2:	ret
+SYM_FUNC_END(__cpu_secondary_check52bitva)
+
+SYM_FUNC_START_LOCAL(__no_granule_support)
+	/* Indicate that this CPU can't boot and is stuck in the kernel */
+	update_early_cpu_boot_status \
+		CPU_STUCK_IN_KERNEL | CPU_STUCK_REASON_NO_GRAN, x1, x2
+1:
+	wfe
+	wfi
+	b	1b
+SYM_FUNC_END(__no_granule_support)
+
+#ifdef CONFIG_RELOCATABLE
+SYM_FUNC_START_LOCAL(__relocate_kernel)
+	/*
+	 * Iterate over each entry in the relocation table, and apply the
+	 * relocations in place.
+	 */
+	adr_l	x9, __rela_start
+	adr_l	x10, __rela_end
+	mov_q	x11, KIMAGE_VADDR		// default virtual offset
+	add	x11, x11, x23			// actual virtual offset
+
+0:	cmp	x9, x10
+	b.hs	1f
+	ldp	x12, x13, [x9], #24
+	ldr	x14, [x9, #-8]
+	cmp	w13, #R_AARCH64_RELATIVE
+	b.ne	0b
+	add	x14, x14, x23			// relocate
+	str	x14, [x12, x23]
+	b	0b
+
+1:
+#ifdef CONFIG_RELR
+	/*
+	 * Apply RELR relocations.
+	 *
+	 * RELR is a compressed format for storing relative relocations. The
+	 * encoded sequence of entries looks like:
+	 * [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ]
+	 *
+	 * i.e. start with an address, followed by any number of bitmaps. The
+	 * address entry encodes 1 relocation. The subsequent bitmap entries
+	 * encode up to 63 relocations each, at subsequent offsets following
+	 * the last address entry.
+	 *
+	 * The bitmap entries must have 1 in the least significant bit. The
+	 * assumption here is that an address cannot have 1 in lsb. Odd
+	 * addresses are not supported. Any odd addresses are stored in the RELA
+	 * section, which is handled above.
+	 *
+	 * Excluding the least significant bit in the bitmap, each non-zero
+	 * bit in the bitmap represents a relocation to be applied to
+	 * a corresponding machine word that follows the base address
+	 * word. The second least significant bit represents the machine
+	 * word immediately following the initial address, and each bit
+	 * that follows represents the next word, in linear order. As such,
+	 * a single bitmap can encode up to 63 relocations in a 64-bit object.
+	 *
+	 * In this implementation we store the address of the next RELR table
+	 * entry in x9, the address being relocated by the current address or
+	 * bitmap entry in x13 and the address being relocated by the current
+	 * bit in x14.
+	 */
+	adr_l	x9, __relr_start
+	adr_l	x10, __relr_end
+
+2:	cmp	x9, x10
+	b.hs	7f
+	ldr	x11, [x9], #8
+	tbnz	x11, #0, 3f			// branch to handle bitmaps
+	add	x13, x11, x23
+	ldr	x12, [x13]			// relocate address entry
+	add	x12, x12, x23
+	str	x12, [x13], #8			// adjust to start of bitmap
+	b	2b
+
+3:	mov	x14, x13
+4:	lsr	x11, x11, #1
+	cbz	x11, 6f
+	tbz	x11, #0, 5f			// skip bit if not set
+	ldr	x12, [x14]			// relocate bit
+	add	x12, x12, x23
+	str	x12, [x14]
+
+5:	add	x14, x14, #8			// move to next bit's address
+	b	4b
+
+6:	/*
+	 * Move to the next bitmap's address. 8 is the word size, and 63 is the
+	 * number of significant bits in a bitmap entry.
+	 */
+	add	x13, x13, #(8 * 63)
+	b	2b
+
+7:
+#endif
+	ret
+
+SYM_FUNC_END(__relocate_kernel)
+#endif
+
+SYM_FUNC_START_LOCAL(__primary_switch)
+	adrp	x1, reserved_pg_dir
+	adrp	x2, init_idmap_pg_dir
+	bl	__enable_mmu
+#ifdef CONFIG_RELOCATABLE
+	adrp	x23, KERNEL_START
+	and	x23, x23, MIN_KIMG_ALIGN - 1
+#ifdef CONFIG_RANDOMIZE_BASE
+	mov	x0, x22
+	adrp	x1, init_pg_end
+	mov	sp, x1
+	mov	x29, xzr
+	bl	__pi_kaslr_early_init
+	and	x24, x0, #SZ_2M - 1		// capture memstart offset seed
+	bic	x0, x0, #SZ_2M - 1
+	orr	x23, x23, x0			// record kernel offset
+#endif
+#endif
+	bl	clear_page_tables
+	bl	create_kernel_mapping
+
+	adrp	x1, init_pg_dir
+	load_ttbr1 x1, x1, x2
+#ifdef CONFIG_RELOCATABLE
+	bl	__relocate_kernel
+#endif
+	ldr	x8, =__primary_switched
+	adrp	x0, KERNEL_START		// __pa(KERNEL_START)
+	br	x8
+SYM_FUNC_END(__primary_switch)
diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S
new file mode 100644
index 000000000..0e1d9c3c6
--- /dev/null
+++ b/arch/arm64/kernel/hibernate-asm.S
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Hibernate low-level support
+ *
+ * Copyright (C) 2016 ARM Ltd.
+ * Author:	James Morse <james.morse@arm.com>
+ */
+#include <linux/linkage.h>
+#include <linux/errno.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/cputype.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/virt.h>
+
+/*
+ * Resume from hibernate
+ *
+ * Loads temporary page tables then restores the memory image.
+ * Finally branches to cpu_resume() to restore the state saved by
+ * swsusp_arch_suspend().
+ *
+ * Because this code has to be copied to a 'safe' page, it can't call out to
+ * other functions by PC-relative address. Also remember that it may be
+ * mid-way through over-writing other functions. For this reason it contains
+ * code from caches_clean_inval_pou() and uses the copy_page() macro.
+ *
+ * This 'safe' page is mapped via ttbr0, and executed from there. This function
+ * switches to a copy of the linear map in ttbr1, performs the restore, then
+ * switches ttbr1 to the original kernel's swapper_pg_dir.
+ *
+ * All of memory gets written to, including code. We need to clean the kernel
+ * text to the Point of Coherence (PoC) before secondary cores can be booted.
+ * Because the kernel modules and executable pages mapped to user space are
+ * also written as data, we clean all pages we touch to the Point of
+ * Unification (PoU).
+ *
+ * x0: physical address of temporary page tables
+ * x1: physical address of swapper page tables
+ * x2: address of cpu_resume
+ * x3: linear map address of restore_pblist in the current kernel
+ * x4: physical address of __hyp_stub_vectors, or 0
+ * x5: physical address of a  zero page that remains zero after resume
+ */
+.pushsection    ".hibernate_exit.text", "ax"
+SYM_CODE_START(swsusp_arch_suspend_exit)
+	/*
+	 * We execute from ttbr0, change ttbr1 to our copied linear map tables
+	 * with a break-before-make via the zero page
+	 */
+	break_before_make_ttbr_switch	x5, x0, x6, x8
+
+	mov	x21, x1
+	mov	x30, x2
+	mov	x24, x4
+	mov	x25, x5
+
+	/* walk the restore_pblist and use copy_page() to over-write memory */
+	mov	x19, x3
+
+1:	ldr	x10, [x19, #HIBERN_PBE_ORIG]
+	mov	x0, x10
+	ldr	x1, [x19, #HIBERN_PBE_ADDR]
+
+	copy_page	x0, x1, x2, x3, x4, x5, x6, x7, x8, x9
+
+	add	x1, x10, #PAGE_SIZE
+	/* Clean the copied page to PoU - based on caches_clean_inval_pou() */
+	raw_dcache_line_size x2, x3
+	sub	x3, x2, #1
+	bic	x4, x10, x3
+2:	/* clean D line / unified line */
+alternative_insn "dc cvau, x4",  "dc civac, x4",  ARM64_WORKAROUND_CLEAN_CACHE
+	add	x4, x4, x2
+	cmp	x4, x1
+	b.lo	2b
+
+	ldr	x19, [x19, #HIBERN_PBE_NEXT]
+	cbnz	x19, 1b
+	dsb	ish		/* wait for PoU cleaning to finish */
+
+	/* switch to the restored kernels page tables */
+	break_before_make_ttbr_switch	x25, x21, x6, x8
+
+	ic	ialluis
+	dsb	ish
+	isb
+
+	cbz	x24, 3f		/* Do we need to re-initialise EL2? */
+	hvc	#0
+3:	ret
+SYM_CODE_END(swsusp_arch_suspend_exit)
+.popsection
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
new file mode 100644
index 000000000..02870beb2
--- /dev/null
+++ b/arch/arm64/kernel/hibernate.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*:
+ * Hibernate support specific for ARM64
+ *
+ * Derived from work on ARM hibernation support by:
+ *
+ * Ubuntu project, hibernation support for mach-dove
+ * Copyright (C) 2010 Nokia Corporation (Hiroshi Doyu)
+ * Copyright (C) 2010 Texas Instruments, Inc. (Teerth Reddy et al.)
+ * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+ */
+#define pr_fmt(x) "hibernate: " x
+#include <linux/cpu.h>
+#include <linux/kvm_host.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <linux/utsname.h>
+
+#include <asm/barrier.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/daifflags.h>
+#include <asm/irqflags.h>
+#include <asm/kexec.h>
+#include <asm/memory.h>
+#include <asm/mmu_context.h>
+#include <asm/mte.h>
+#include <asm/sections.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <asm/sysreg.h>
+#include <asm/trans_pgd.h>
+#include <asm/virt.h>
+
+/*
+ * Hibernate core relies on this value being 0 on resume, and marks it
+ * __nosavedata assuming it will keep the resume kernel's '0' value. This
+ * doesn't happen with either KASLR.
+ *
+ * defined as "__visible int in_suspend __nosavedata" in
+ * kernel/power/hibernate.c
+ */
+extern int in_suspend;
+
+/* Do we need to reset el2? */
+#define el2_reset_needed() (is_hyp_nvhe())
+
+/* hyp-stub vectors, used to restore el2 during resume from hibernate. */
+extern char __hyp_stub_vectors[];
+
+/*
+ * The logical cpu number we should resume on, initialised to a non-cpu
+ * number.
+ */
+static int sleep_cpu = -EINVAL;
+
+/*
+ * Values that may not change over hibernate/resume. We put the build number
+ * and date in here so that we guarantee not to resume with a different
+ * kernel.
+ */
+struct arch_hibernate_hdr_invariants {
+	char		uts_version[__NEW_UTS_LEN + 1];
+};
+
+/* These values need to be know across a hibernate/restore. */
+static struct arch_hibernate_hdr {
+	struct arch_hibernate_hdr_invariants invariants;
+
+	/* These are needed to find the relocated kernel if built with kaslr */
+	phys_addr_t	ttbr1_el1;
+	void		(*reenter_kernel)(void);
+
+	/*
+	 * We need to know where the __hyp_stub_vectors are after restore to
+	 * re-configure el2.
+	 */
+	phys_addr_t	__hyp_stub_vectors;
+
+	u64		sleep_cpu_mpidr;
+} resume_hdr;
+
+static inline void arch_hdr_invariants(struct arch_hibernate_hdr_invariants *i)
+{
+	memset(i, 0, sizeof(*i));
+	memcpy(i->uts_version, init_utsname()->version, sizeof(i->uts_version));
+}
+
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = sym_to_pfn(&__nosave_begin);
+	unsigned long nosave_end_pfn = sym_to_pfn(&__nosave_end - 1);
+
+	return ((pfn >= nosave_begin_pfn) && (pfn <= nosave_end_pfn)) ||
+		crash_is_nosave(pfn);
+}
+
+void notrace save_processor_state(void)
+{
+}
+
+void notrace restore_processor_state(void)
+{
+}
+
+int arch_hibernation_header_save(void *addr, unsigned int max_size)
+{
+	struct arch_hibernate_hdr *hdr = addr;
+
+	if (max_size < sizeof(*hdr))
+		return -EOVERFLOW;
+
+	arch_hdr_invariants(&hdr->invariants);
+	hdr->ttbr1_el1		= __pa_symbol(swapper_pg_dir);
+	hdr->reenter_kernel	= _cpu_resume;
+
+	/* We can't use __hyp_get_vectors() because kvm may still be loaded */
+	if (el2_reset_needed())
+		hdr->__hyp_stub_vectors = __pa_symbol(__hyp_stub_vectors);
+	else
+		hdr->__hyp_stub_vectors = 0;
+
+	/* Save the mpidr of the cpu we called cpu_suspend() on... */
+	if (sleep_cpu < 0) {
+		pr_err("Failing to hibernate on an unknown CPU.\n");
+		return -ENODEV;
+	}
+	hdr->sleep_cpu_mpidr = cpu_logical_map(sleep_cpu);
+	pr_info("Hibernating on CPU %d [mpidr:0x%llx]\n", sleep_cpu,
+		hdr->sleep_cpu_mpidr);
+
+	return 0;
+}
+EXPORT_SYMBOL(arch_hibernation_header_save);
+
+int arch_hibernation_header_restore(void *addr)
+{
+	int ret;
+	struct arch_hibernate_hdr_invariants invariants;
+	struct arch_hibernate_hdr *hdr = addr;
+
+	arch_hdr_invariants(&invariants);
+	if (memcmp(&hdr->invariants, &invariants, sizeof(invariants))) {
+		pr_crit("Hibernate image not generated by this kernel!\n");
+		return -EINVAL;
+	}
+
+	sleep_cpu = get_logical_index(hdr->sleep_cpu_mpidr);
+	pr_info("Hibernated on CPU %d [mpidr:0x%llx]\n", sleep_cpu,
+		hdr->sleep_cpu_mpidr);
+	if (sleep_cpu < 0) {
+		pr_crit("Hibernated on a CPU not known to this kernel!\n");
+		sleep_cpu = -EINVAL;
+		return -EINVAL;
+	}
+
+	ret = bringup_hibernate_cpu(sleep_cpu);
+	if (ret) {
+		sleep_cpu = -EINVAL;
+		return ret;
+	}
+
+	resume_hdr = *hdr;
+
+	return 0;
+}
+EXPORT_SYMBOL(arch_hibernation_header_restore);
+
+static void *hibernate_page_alloc(void *arg)
+{
+	return (void *)get_safe_page((__force gfp_t)(unsigned long)arg);
+}
+
+/*
+ * Copies length bytes, starting at src_start into an new page,
+ * perform cache maintenance, then maps it at the specified address low
+ * address as executable.
+ *
+ * This is used by hibernate to copy the code it needs to execute when
+ * overwriting the kernel text. This function generates a new set of page
+ * tables, which it loads into ttbr0.
+ *
+ * Length is provided as we probably only want 4K of data, even on a 64K
+ * page system.
+ */
+static int create_safe_exec_page(void *src_start, size_t length,
+				 phys_addr_t *phys_dst_addr)
+{
+	struct trans_pgd_info trans_info = {
+		.trans_alloc_page	= hibernate_page_alloc,
+		.trans_alloc_arg	= (__force void *)GFP_ATOMIC,
+	};
+
+	void *page = (void *)get_safe_page(GFP_ATOMIC);
+	phys_addr_t trans_ttbr0;
+	unsigned long t0sz;
+	int rc;
+
+	if (!page)
+		return -ENOMEM;
+
+	memcpy(page, src_start, length);
+	caches_clean_inval_pou((unsigned long)page, (unsigned long)page + length);
+	rc = trans_pgd_idmap_page(&trans_info, &trans_ttbr0, &t0sz, page);
+	if (rc)
+		return rc;
+
+	cpu_install_ttbr0(trans_ttbr0, t0sz);
+	*phys_dst_addr = virt_to_phys(page);
+
+	return 0;
+}
+
+#ifdef CONFIG_ARM64_MTE
+
+static DEFINE_XARRAY(mte_pages);
+
+static int save_tags(struct page *page, unsigned long pfn)
+{
+	void *tag_storage, *ret;
+
+	tag_storage = mte_allocate_tag_storage();
+	if (!tag_storage)
+		return -ENOMEM;
+
+	mte_save_page_tags(page_address(page), tag_storage);
+
+	ret = xa_store(&mte_pages, pfn, tag_storage, GFP_KERNEL);
+	if (WARN(xa_is_err(ret), "Failed to store MTE tags")) {
+		mte_free_tag_storage(tag_storage);
+		return xa_err(ret);
+	} else if (WARN(ret, "swsusp: %s: Duplicate entry", __func__)) {
+		mte_free_tag_storage(ret);
+	}
+
+	return 0;
+}
+
+static void swsusp_mte_free_storage(void)
+{
+	XA_STATE(xa_state, &mte_pages, 0);
+	void *tags;
+
+	xa_lock(&mte_pages);
+	xas_for_each(&xa_state, tags, ULONG_MAX) {
+		mte_free_tag_storage(tags);
+	}
+	xa_unlock(&mte_pages);
+
+	xa_destroy(&mte_pages);
+}
+
+static int swsusp_mte_save_tags(void)
+{
+	struct zone *zone;
+	unsigned long pfn, max_zone_pfn;
+	int ret = 0;
+	int n = 0;
+
+	if (!system_supports_mte())
+		return 0;
+
+	for_each_populated_zone(zone) {
+		max_zone_pfn = zone_end_pfn(zone);
+		for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++) {
+			struct page *page = pfn_to_online_page(pfn);
+
+			if (!page)
+				continue;
+
+			if (!page_mte_tagged(page))
+				continue;
+
+			ret = save_tags(page, pfn);
+			if (ret) {
+				swsusp_mte_free_storage();
+				goto out;
+			}
+
+			n++;
+		}
+	}
+	pr_info("Saved %d MTE pages\n", n);
+
+out:
+	return ret;
+}
+
+static void swsusp_mte_restore_tags(void)
+{
+	XA_STATE(xa_state, &mte_pages, 0);
+	int n = 0;
+	void *tags;
+
+	xa_lock(&mte_pages);
+	xas_for_each(&xa_state, tags, ULONG_MAX) {
+		unsigned long pfn = xa_state.xa_index;
+		struct page *page = pfn_to_online_page(pfn);
+
+		mte_restore_page_tags(page_address(page), tags);
+
+		mte_free_tag_storage(tags);
+		n++;
+	}
+	xa_unlock(&mte_pages);
+
+	pr_info("Restored %d MTE pages\n", n);
+
+	xa_destroy(&mte_pages);
+}
+
+#else	/* CONFIG_ARM64_MTE */
+
+static int swsusp_mte_save_tags(void)
+{
+	return 0;
+}
+
+static void swsusp_mte_restore_tags(void)
+{
+}
+
+#endif	/* CONFIG_ARM64_MTE */
+
+int swsusp_arch_suspend(void)
+{
+	int ret = 0;
+	unsigned long flags;
+	struct sleep_stack_data state;
+
+	if (cpus_are_stuck_in_kernel()) {
+		pr_err("Can't hibernate: no mechanism to offline secondary CPUs.\n");
+		return -EBUSY;
+	}
+
+	flags = local_daif_save();
+
+	if (__cpu_suspend_enter(&state)) {
+		/* make the crash dump kernel image visible/saveable */
+		crash_prepare_suspend();
+
+		ret = swsusp_mte_save_tags();
+		if (ret)
+			return ret;
+
+		sleep_cpu = smp_processor_id();
+		ret = swsusp_save();
+	} else {
+		/* Clean kernel core startup/idle code to PoC*/
+		dcache_clean_inval_poc((unsigned long)__mmuoff_data_start,
+				    (unsigned long)__mmuoff_data_end);
+		dcache_clean_inval_poc((unsigned long)__idmap_text_start,
+				    (unsigned long)__idmap_text_end);
+
+		/* Clean kvm setup code to PoC? */
+		if (el2_reset_needed()) {
+			dcache_clean_inval_poc(
+				(unsigned long)__hyp_idmap_text_start,
+				(unsigned long)__hyp_idmap_text_end);
+			dcache_clean_inval_poc((unsigned long)__hyp_text_start,
+					    (unsigned long)__hyp_text_end);
+		}
+
+		swsusp_mte_restore_tags();
+
+		/* make the crash dump kernel image protected again */
+		crash_post_resume();
+
+		/*
+		 * Tell the hibernation core that we've just restored
+		 * the memory
+		 */
+		in_suspend = 0;
+
+		sleep_cpu = -EINVAL;
+		__cpu_suspend_exit();
+
+		/*
+		 * Just in case the boot kernel did turn the SSBD
+		 * mitigation off behind our back, let's set the state
+		 * to what we expect it to be.
+		 */
+		spectre_v4_enable_mitigation(NULL);
+	}
+
+	local_daif_restore(flags);
+
+	return ret;
+}
+
+/*
+ * Setup then Resume from the hibernate image using swsusp_arch_suspend_exit().
+ *
+ * Memory allocated by get_safe_page() will be dealt with by the hibernate code,
+ * we don't need to free it here.
+ */
+int swsusp_arch_resume(void)
+{
+	int rc;
+	void *zero_page;
+	size_t exit_size;
+	pgd_t *tmp_pg_dir;
+	phys_addr_t el2_vectors;
+	void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *,
+					  void *, phys_addr_t, phys_addr_t);
+	struct trans_pgd_info trans_info = {
+		.trans_alloc_page	= hibernate_page_alloc,
+		.trans_alloc_arg	= (void *)GFP_ATOMIC,
+	};
+
+	/*
+	 * Restoring the memory image will overwrite the ttbr1 page tables.
+	 * Create a second copy of just the linear map, and use this when
+	 * restoring.
+	 */
+	rc = trans_pgd_create_copy(&trans_info, &tmp_pg_dir, PAGE_OFFSET,
+				   PAGE_END);
+	if (rc)
+		return rc;
+
+	/*
+	 * We need a zero page that is zero before & after resume in order
+	 * to break before make on the ttbr1 page tables.
+	 */
+	zero_page = (void *)get_safe_page(GFP_ATOMIC);
+	if (!zero_page) {
+		pr_err("Failed to allocate zero page.\n");
+		return -ENOMEM;
+	}
+
+	if (el2_reset_needed()) {
+		rc = trans_pgd_copy_el2_vectors(&trans_info, &el2_vectors);
+		if (rc) {
+			pr_err("Failed to setup el2 vectors\n");
+			return rc;
+		}
+	}
+
+	exit_size = __hibernate_exit_text_end - __hibernate_exit_text_start;
+	/*
+	 * Copy swsusp_arch_suspend_exit() to a safe page. This will generate
+	 * a new set of ttbr0 page tables and load them.
+	 */
+	rc = create_safe_exec_page(__hibernate_exit_text_start, exit_size,
+				   (phys_addr_t *)&hibernate_exit);
+	if (rc) {
+		pr_err("Failed to create safe executable page for hibernate_exit code.\n");
+		return rc;
+	}
+
+	/*
+	 * KASLR will cause the el2 vectors to be in a different location in
+	 * the resumed kernel. Load hibernate's temporary copy into el2.
+	 *
+	 * We can skip this step if we booted at EL1, or are running with VHE.
+	 */
+	if (el2_reset_needed())
+		__hyp_set_vectors(el2_vectors);
+
+	hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1,
+		       resume_hdr.reenter_kernel, restore_pblist,
+		       resume_hdr.__hyp_stub_vectors, virt_to_phys(zero_page));
+
+	return 0;
+}
+
+int hibernate_resume_nonboot_cpu_disable(void)
+{
+	if (sleep_cpu < 0) {
+		pr_err("Failing to resume from hibernate on an unknown CPU.\n");
+		return -ENODEV;
+	}
+
+	return freeze_secondary_cpus(sleep_cpu);
+}
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
new file mode 100644
index 000000000..35225632d
--- /dev/null
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ *
+ * Copyright (C) 2012 ARM Limited
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define pr_fmt(fmt) "hw-breakpoint: " fmt
+
+#include <linux/compat.h>
+#include <linux/cpu_pm.h>
+#include <linux/errno.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/kprobes.h>
+#include <linux/perf_event.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+#include <linux/uaccess.h>
+
+#include <asm/current.h>
+#include <asm/debug-monitors.h>
+#include <asm/hw_breakpoint.h>
+#include <asm/traps.h>
+#include <asm/cputype.h>
+#include <asm/system_misc.h>
+
+/* Breakpoint currently in use for each BRP. */
+static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
+
+/* Watchpoint currently in use for each WRP. */
+static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
+
+/* Currently stepping a per-CPU kernel breakpoint. */
+static DEFINE_PER_CPU(int, stepping_kernel_bp);
+
+/* Number of BRP/WRP registers on this CPU. */
+static int core_num_brps;
+static int core_num_wrps;
+
+int hw_breakpoint_slots(int type)
+{
+	/*
+	 * We can be called early, so don't rely on
+	 * our static variables being initialised.
+	 */
+	switch (type) {
+	case TYPE_INST:
+		return get_num_brps();
+	case TYPE_DATA:
+		return get_num_wrps();
+	default:
+		pr_warn("unknown slot type: %d\n", type);
+		return 0;
+	}
+}
+
+#define READ_WB_REG_CASE(OFF, N, REG, VAL)	\
+	case (OFF + N):				\
+		AARCH64_DBG_READ(N, REG, VAL);	\
+		break
+
+#define WRITE_WB_REG_CASE(OFF, N, REG, VAL)	\
+	case (OFF + N):				\
+		AARCH64_DBG_WRITE(N, REG, VAL);	\
+		break
+
+#define GEN_READ_WB_REG_CASES(OFF, REG, VAL)	\
+	READ_WB_REG_CASE(OFF,  0, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  1, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  2, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  3, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  4, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  5, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  6, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  7, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  8, REG, VAL);	\
+	READ_WB_REG_CASE(OFF,  9, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 10, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 11, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 12, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 13, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 14, REG, VAL);	\
+	READ_WB_REG_CASE(OFF, 15, REG, VAL)
+
+#define GEN_WRITE_WB_REG_CASES(OFF, REG, VAL)	\
+	WRITE_WB_REG_CASE(OFF,  0, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  1, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  2, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  3, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  4, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  5, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  6, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  7, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  8, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF,  9, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 10, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 11, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 12, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 13, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 14, REG, VAL);	\
+	WRITE_WB_REG_CASE(OFF, 15, REG, VAL)
+
+static u64 read_wb_reg(int reg, int n)
+{
+	u64 val = 0;
+
+	switch (reg + n) {
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val);
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val);
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val);
+	GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val);
+	default:
+		pr_warn("attempt to read from unknown breakpoint register %d\n", n);
+	}
+
+	return val;
+}
+NOKPROBE_SYMBOL(read_wb_reg);
+
+static void write_wb_reg(int reg, int n, u64 val)
+{
+	switch (reg + n) {
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BVR, AARCH64_DBG_REG_NAME_BVR, val);
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_BCR, AARCH64_DBG_REG_NAME_BCR, val);
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val);
+	GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val);
+	default:
+		pr_warn("attempt to write to unknown breakpoint register %d\n", n);
+	}
+	isb();
+}
+NOKPROBE_SYMBOL(write_wb_reg);
+
+/*
+ * Convert a breakpoint privilege level to the corresponding exception
+ * level.
+ */
+static enum dbg_active_el debug_exception_level(int privilege)
+{
+	switch (privilege) {
+	case AARCH64_BREAKPOINT_EL0:
+		return DBG_ACTIVE_EL0;
+	case AARCH64_BREAKPOINT_EL1:
+		return DBG_ACTIVE_EL1;
+	default:
+		pr_warn("invalid breakpoint privilege level %d\n", privilege);
+		return -EINVAL;
+	}
+}
+NOKPROBE_SYMBOL(debug_exception_level);
+
+enum hw_breakpoint_ops {
+	HW_BREAKPOINT_INSTALL,
+	HW_BREAKPOINT_UNINSTALL,
+	HW_BREAKPOINT_RESTORE
+};
+
+static int is_compat_bp(struct perf_event *bp)
+{
+	struct task_struct *tsk = bp->hw.target;
+
+	/*
+	 * tsk can be NULL for per-cpu (non-ptrace) breakpoints.
+	 * In this case, use the native interface, since we don't have
+	 * the notion of a "compat CPU" and could end up relying on
+	 * deprecated behaviour if we use unaligned watchpoints in
+	 * AArch64 state.
+	 */
+	return tsk && is_compat_thread(task_thread_info(tsk));
+}
+
+/**
+ * hw_breakpoint_slot_setup - Find and setup a perf slot according to
+ *			      operations
+ *
+ * @slots: pointer to array of slots
+ * @max_slots: max number of slots
+ * @bp: perf_event to setup
+ * @ops: operation to be carried out on the slot
+ *
+ * Return:
+ *	slot index on success
+ *	-ENOSPC if no slot is available/matches
+ *	-EINVAL on wrong operations parameter
+ */
+static int hw_breakpoint_slot_setup(struct perf_event **slots, int max_slots,
+				    struct perf_event *bp,
+				    enum hw_breakpoint_ops ops)
+{
+	int i;
+	struct perf_event **slot;
+
+	for (i = 0; i < max_slots; ++i) {
+		slot = &slots[i];
+		switch (ops) {
+		case HW_BREAKPOINT_INSTALL:
+			if (!*slot) {
+				*slot = bp;
+				return i;
+			}
+			break;
+		case HW_BREAKPOINT_UNINSTALL:
+			if (*slot == bp) {
+				*slot = NULL;
+				return i;
+			}
+			break;
+		case HW_BREAKPOINT_RESTORE:
+			if (*slot == bp)
+				return i;
+			break;
+		default:
+			pr_warn_once("Unhandled hw breakpoint ops %d\n", ops);
+			return -EINVAL;
+		}
+	}
+	return -ENOSPC;
+}
+
+static int hw_breakpoint_control(struct perf_event *bp,
+				 enum hw_breakpoint_ops ops)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	struct perf_event **slots;
+	struct debug_info *debug_info = &current->thread.debug;
+	int i, max_slots, ctrl_reg, val_reg, reg_enable;
+	enum dbg_active_el dbg_el = debug_exception_level(info->ctrl.privilege);
+	u32 ctrl;
+
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		ctrl_reg = AARCH64_DBG_REG_BCR;
+		val_reg = AARCH64_DBG_REG_BVR;
+		slots = this_cpu_ptr(bp_on_reg);
+		max_slots = core_num_brps;
+		reg_enable = !debug_info->bps_disabled;
+	} else {
+		/* Watchpoint */
+		ctrl_reg = AARCH64_DBG_REG_WCR;
+		val_reg = AARCH64_DBG_REG_WVR;
+		slots = this_cpu_ptr(wp_on_reg);
+		max_slots = core_num_wrps;
+		reg_enable = !debug_info->wps_disabled;
+	}
+
+	i = hw_breakpoint_slot_setup(slots, max_slots, bp, ops);
+
+	if (WARN_ONCE(i < 0, "Can't find any breakpoint slot"))
+		return i;
+
+	switch (ops) {
+	case HW_BREAKPOINT_INSTALL:
+		/*
+		 * Ensure debug monitors are enabled at the correct exception
+		 * level.
+		 */
+		enable_debug_monitors(dbg_el);
+		fallthrough;
+	case HW_BREAKPOINT_RESTORE:
+		/* Setup the address register. */
+		write_wb_reg(val_reg, i, info->address);
+
+		/* Setup the control register. */
+		ctrl = encode_ctrl_reg(info->ctrl);
+		write_wb_reg(ctrl_reg, i,
+			     reg_enable ? ctrl | 0x1 : ctrl & ~0x1);
+		break;
+	case HW_BREAKPOINT_UNINSTALL:
+		/* Reset the control register. */
+		write_wb_reg(ctrl_reg, i, 0);
+
+		/*
+		 * Release the debug monitors for the correct exception
+		 * level.
+		 */
+		disable_debug_monitors(dbg_el);
+		break;
+	}
+
+	return 0;
+}
+
+/*
+ * Install a perf counter breakpoint.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	return hw_breakpoint_control(bp, HW_BREAKPOINT_INSTALL);
+}
+
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	hw_breakpoint_control(bp, HW_BREAKPOINT_UNINSTALL);
+}
+
+static int get_hbp_len(u8 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case ARM_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case ARM_BREAKPOINT_LEN_3:
+		len_in_bytes = 3;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+	case ARM_BREAKPOINT_LEN_5:
+		len_in_bytes = 5;
+		break;
+	case ARM_BREAKPOINT_LEN_6:
+		len_in_bytes = 6;
+		break;
+	case ARM_BREAKPOINT_LEN_7:
+		len_in_bytes = 7;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+	}
+
+	return len_in_bytes;
+}
+
+/*
+ * Check whether bp virtual address is in kernel space.
+ */
+int arch_check_bp_in_kernelspace(struct arch_hw_breakpoint *hw)
+{
+	unsigned int len;
+	unsigned long va;
+
+	va = hw->address;
+	len = get_hbp_len(hw->ctrl.len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Extract generic type and length encodings from an arch_hw_breakpoint_ctrl.
+ * Hopefully this will disappear when ptrace can bypass the conversion
+ * to generic breakpoint descriptions.
+ */
+int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
+			   int *gen_len, int *gen_type, int *offset)
+{
+	/* Type */
+	switch (ctrl.type) {
+	case ARM_BREAKPOINT_EXECUTE:
+		*gen_type = HW_BREAKPOINT_X;
+		break;
+	case ARM_BREAKPOINT_LOAD:
+		*gen_type = HW_BREAKPOINT_R;
+		break;
+	case ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE:
+		*gen_type = HW_BREAKPOINT_RW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!ctrl.len)
+		return -EINVAL;
+	*offset = __ffs(ctrl.len);
+
+	/* Len */
+	switch (ctrl.len >> *offset) {
+	case ARM_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case ARM_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case ARM_BREAKPOINT_LEN_3:
+		*gen_len = HW_BREAKPOINT_LEN_3;
+		break;
+	case ARM_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+	case ARM_BREAKPOINT_LEN_5:
+		*gen_len = HW_BREAKPOINT_LEN_5;
+		break;
+	case ARM_BREAKPOINT_LEN_6:
+		*gen_len = HW_BREAKPOINT_LEN_6;
+		break;
+	case ARM_BREAKPOINT_LEN_7:
+		*gen_len = HW_BREAKPOINT_LEN_7;
+		break;
+	case ARM_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Construct an arch_hw_breakpoint from a perf_event.
+ */
+static int arch_build_bp_info(struct perf_event *bp,
+			      const struct perf_event_attr *attr,
+			      struct arch_hw_breakpoint *hw)
+{
+	/* Type */
+	switch (attr->bp_type) {
+	case HW_BREAKPOINT_X:
+		hw->ctrl.type = ARM_BREAKPOINT_EXECUTE;
+		break;
+	case HW_BREAKPOINT_R:
+		hw->ctrl.type = ARM_BREAKPOINT_LOAD;
+		break;
+	case HW_BREAKPOINT_W:
+		hw->ctrl.type = ARM_BREAKPOINT_STORE;
+		break;
+	case HW_BREAKPOINT_RW:
+		hw->ctrl.type = ARM_BREAKPOINT_LOAD | ARM_BREAKPOINT_STORE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	switch (attr->bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_3:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_3;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_4;
+		break;
+	case HW_BREAKPOINT_LEN_5:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_5;
+		break;
+	case HW_BREAKPOINT_LEN_6:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_6;
+		break;
+	case HW_BREAKPOINT_LEN_7:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_7;
+		break;
+	case HW_BREAKPOINT_LEN_8:
+		hw->ctrl.len = ARM_BREAKPOINT_LEN_8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * On AArch64, we only permit breakpoints of length 4, whereas
+	 * AArch32 also requires breakpoints of length 2 for Thumb.
+	 * Watchpoints can be of length 1, 2, 4 or 8 bytes.
+	 */
+	if (hw->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
+		if (is_compat_bp(bp)) {
+			if (hw->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
+			    hw->ctrl.len != ARM_BREAKPOINT_LEN_4)
+				return -EINVAL;
+		} else if (hw->ctrl.len != ARM_BREAKPOINT_LEN_4) {
+			/*
+			 * FIXME: Some tools (I'm looking at you perf) assume
+			 *	  that breakpoints should be sizeof(long). This
+			 *	  is nonsense. For now, we fix up the parameter
+			 *	  but we should probably return -EINVAL instead.
+			 */
+			hw->ctrl.len = ARM_BREAKPOINT_LEN_4;
+		}
+	}
+
+	/* Address */
+	hw->address = attr->bp_addr;
+
+	/*
+	 * Privilege
+	 * Note that we disallow combined EL0/EL1 breakpoints because
+	 * that would complicate the stepping code.
+	 */
+	if (arch_check_bp_in_kernelspace(hw))
+		hw->ctrl.privilege = AARCH64_BREAKPOINT_EL1;
+	else
+		hw->ctrl.privilege = AARCH64_BREAKPOINT_EL0;
+
+	/* Enabled? */
+	hw->ctrl.enabled = !attr->disabled;
+
+	return 0;
+}
+
+/*
+ * Validate the arch-specific HW Breakpoint register settings.
+ */
+int hw_breakpoint_arch_parse(struct perf_event *bp,
+			     const struct perf_event_attr *attr,
+			     struct arch_hw_breakpoint *hw)
+{
+	int ret;
+	u64 alignment_mask, offset;
+
+	/* Build the arch_hw_breakpoint. */
+	ret = arch_build_bp_info(bp, attr, hw);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check address alignment.
+	 * We don't do any clever alignment correction for watchpoints
+	 * because using 64-bit unaligned addresses is deprecated for
+	 * AArch64.
+	 *
+	 * AArch32 tasks expect some simple alignment fixups, so emulate
+	 * that here.
+	 */
+	if (is_compat_bp(bp)) {
+		if (hw->ctrl.len == ARM_BREAKPOINT_LEN_8)
+			alignment_mask = 0x7;
+		else
+			alignment_mask = 0x3;
+		offset = hw->address & alignment_mask;
+		switch (offset) {
+		case 0:
+			/* Aligned */
+			break;
+		case 1:
+		case 2:
+			/* Allow halfword watchpoints and breakpoints. */
+			if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
+				break;
+
+			fallthrough;
+		case 3:
+			/* Allow single byte watchpoint. */
+			if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
+				break;
+
+			fallthrough;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		if (hw->ctrl.type == ARM_BREAKPOINT_EXECUTE)
+			alignment_mask = 0x3;
+		else
+			alignment_mask = 0x7;
+		offset = hw->address & alignment_mask;
+	}
+
+	hw->address &= ~alignment_mask;
+	hw->ctrl.len <<= offset;
+
+	/*
+	 * Disallow per-task kernel breakpoints since these would
+	 * complicate the stepping code.
+	 */
+	if (hw->ctrl.privilege == AARCH64_BREAKPOINT_EL1 && bp->hw.target)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Enable/disable all of the breakpoints active at the specified
+ * exception level at the register level.
+ * This is used when single-stepping after a breakpoint exception.
+ */
+static void toggle_bp_registers(int reg, enum dbg_active_el el, int enable)
+{
+	int i, max_slots, privilege;
+	u32 ctrl;
+	struct perf_event **slots;
+
+	switch (reg) {
+	case AARCH64_DBG_REG_BCR:
+		slots = this_cpu_ptr(bp_on_reg);
+		max_slots = core_num_brps;
+		break;
+	case AARCH64_DBG_REG_WCR:
+		slots = this_cpu_ptr(wp_on_reg);
+		max_slots = core_num_wrps;
+		break;
+	default:
+		return;
+	}
+
+	for (i = 0; i < max_slots; ++i) {
+		if (!slots[i])
+			continue;
+
+		privilege = counter_arch_bp(slots[i])->ctrl.privilege;
+		if (debug_exception_level(privilege) != el)
+			continue;
+
+		ctrl = read_wb_reg(reg, i);
+		if (enable)
+			ctrl |= 0x1;
+		else
+			ctrl &= ~0x1;
+		write_wb_reg(reg, i, ctrl);
+	}
+}
+NOKPROBE_SYMBOL(toggle_bp_registers);
+
+/*
+ * Debug exception handlers.
+ */
+static int breakpoint_handler(unsigned long unused, unsigned long esr,
+			      struct pt_regs *regs)
+{
+	int i, step = 0, *kernel_step;
+	u32 ctrl_reg;
+	u64 addr, val;
+	struct perf_event *bp, **slots;
+	struct debug_info *debug_info;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	slots = this_cpu_ptr(bp_on_reg);
+	addr = instruction_pointer(regs);
+	debug_info = &current->thread.debug;
+
+	for (i = 0; i < core_num_brps; ++i) {
+		rcu_read_lock();
+
+		bp = slots[i];
+
+		if (bp == NULL)
+			goto unlock;
+
+		/* Check if the breakpoint value matches. */
+		val = read_wb_reg(AARCH64_DBG_REG_BVR, i);
+		if (val != (addr & ~0x3))
+			goto unlock;
+
+		/* Possible match, check the byte address select to confirm. */
+		ctrl_reg = read_wb_reg(AARCH64_DBG_REG_BCR, i);
+		decode_ctrl_reg(ctrl_reg, &ctrl);
+		if (!((1 << (addr & 0x3)) & ctrl.len))
+			goto unlock;
+
+		counter_arch_bp(bp)->trigger = addr;
+		perf_bp_event(bp, regs);
+
+		/* Do we need to handle the stepping? */
+		if (uses_default_overflow_handler(bp))
+			step = 1;
+unlock:
+		rcu_read_unlock();
+	}
+
+	if (!step)
+		return 0;
+
+	if (user_mode(regs)) {
+		debug_info->bps_disabled = 1;
+		toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 0);
+
+		/* If we're already stepping a watchpoint, just return. */
+		if (debug_info->wps_disabled)
+			return 0;
+
+		if (test_thread_flag(TIF_SINGLESTEP))
+			debug_info->suspended_step = 1;
+		else
+			user_enable_single_step(current);
+	} else {
+		toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 0);
+		kernel_step = this_cpu_ptr(&stepping_kernel_bp);
+
+		if (*kernel_step != ARM_KERNEL_STEP_NONE)
+			return 0;
+
+		if (kernel_active_single_step()) {
+			*kernel_step = ARM_KERNEL_STEP_SUSPEND;
+		} else {
+			*kernel_step = ARM_KERNEL_STEP_ACTIVE;
+			kernel_enable_single_step(regs);
+		}
+	}
+
+	return 0;
+}
+NOKPROBE_SYMBOL(breakpoint_handler);
+
+/*
+ * Arm64 hardware does not always report a watchpoint hit address that matches
+ * one of the watchpoints set. It can also report an address "near" the
+ * watchpoint if a single instruction access both watched and unwatched
+ * addresses. There is no straight-forward way, short of disassembling the
+ * offending instruction, to map that address back to the watchpoint. This
+ * function computes the distance of the memory access from the watchpoint as a
+ * heuristic for the likelihood that a given access triggered the watchpoint.
+ *
+ * See Section D2.10.5 "Determining the memory location that caused a Watchpoint
+ * exception" of ARMv8 Architecture Reference Manual for details.
+ *
+ * The function returns the distance of the address from the bytes watched by
+ * the watchpoint. In case of an exact match, it returns 0.
+ */
+static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
+					struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	u64 wp_low, wp_high;
+	u32 lens, lene;
+
+	addr = untagged_addr(addr);
+
+	lens = __ffs(ctrl->len);
+	lene = __fls(ctrl->len);
+
+	wp_low = val + lens;
+	wp_high = val + lene;
+	if (addr < wp_low)
+		return wp_low - addr;
+	else if (addr > wp_high)
+		return addr - wp_high;
+	else
+		return 0;
+}
+
+static int watchpoint_report(struct perf_event *wp, unsigned long addr,
+			     struct pt_regs *regs)
+{
+	int step = uses_default_overflow_handler(wp);
+	struct arch_hw_breakpoint *info = counter_arch_bp(wp);
+
+	info->trigger = addr;
+
+	/*
+	 * If we triggered a user watchpoint from a uaccess routine, then
+	 * handle the stepping ourselves since userspace really can't help
+	 * us with this.
+	 */
+	if (!user_mode(regs) && info->ctrl.privilege == AARCH64_BREAKPOINT_EL0)
+		step = 1;
+	else
+		perf_bp_event(wp, regs);
+
+	return step;
+}
+
+static int watchpoint_handler(unsigned long addr, unsigned long esr,
+			      struct pt_regs *regs)
+{
+	int i, step = 0, *kernel_step, access, closest_match = 0;
+	u64 min_dist = -1, dist;
+	u32 ctrl_reg;
+	u64 val;
+	struct perf_event *wp, **slots;
+	struct debug_info *debug_info;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	slots = this_cpu_ptr(wp_on_reg);
+	debug_info = &current->thread.debug;
+
+	/*
+	 * Find all watchpoints that match the reported address. If no exact
+	 * match is found. Attribute the hit to the closest watchpoint.
+	 */
+	rcu_read_lock();
+	for (i = 0; i < core_num_wrps; ++i) {
+		wp = slots[i];
+		if (wp == NULL)
+			continue;
+
+		/*
+		 * Check that the access type matches.
+		 * 0 => load, otherwise => store
+		 */
+		access = (esr & AARCH64_ESR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+			 HW_BREAKPOINT_R;
+		if (!(access & hw_breakpoint_type(wp)))
+			continue;
+
+		/* Check if the watchpoint value and byte select match. */
+		val = read_wb_reg(AARCH64_DBG_REG_WVR, i);
+		ctrl_reg = read_wb_reg(AARCH64_DBG_REG_WCR, i);
+		decode_ctrl_reg(ctrl_reg, &ctrl);
+		dist = get_distance_from_watchpoint(addr, val, &ctrl);
+		if (dist < min_dist) {
+			min_dist = dist;
+			closest_match = i;
+		}
+		/* Is this an exact match? */
+		if (dist != 0)
+			continue;
+
+		step = watchpoint_report(wp, addr, regs);
+	}
+
+	/* No exact match found? */
+	if (min_dist > 0 && min_dist != -1)
+		step = watchpoint_report(slots[closest_match], addr, regs);
+
+	rcu_read_unlock();
+
+	if (!step)
+		return 0;
+
+	/*
+	 * We always disable EL0 watchpoints because the kernel can
+	 * cause these to fire via an unprivileged access.
+	 */
+	toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 0);
+
+	if (user_mode(regs)) {
+		debug_info->wps_disabled = 1;
+
+		/* If we're already stepping a breakpoint, just return. */
+		if (debug_info->bps_disabled)
+			return 0;
+
+		if (test_thread_flag(TIF_SINGLESTEP))
+			debug_info->suspended_step = 1;
+		else
+			user_enable_single_step(current);
+	} else {
+		toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 0);
+		kernel_step = this_cpu_ptr(&stepping_kernel_bp);
+
+		if (*kernel_step != ARM_KERNEL_STEP_NONE)
+			return 0;
+
+		if (kernel_active_single_step()) {
+			*kernel_step = ARM_KERNEL_STEP_SUSPEND;
+		} else {
+			*kernel_step = ARM_KERNEL_STEP_ACTIVE;
+			kernel_enable_single_step(regs);
+		}
+	}
+
+	return 0;
+}
+NOKPROBE_SYMBOL(watchpoint_handler);
+
+/*
+ * Handle single-step exception.
+ */
+int reinstall_suspended_bps(struct pt_regs *regs)
+{
+	struct debug_info *debug_info = &current->thread.debug;
+	int handled_exception = 0, *kernel_step;
+
+	kernel_step = this_cpu_ptr(&stepping_kernel_bp);
+
+	/*
+	 * Called from single-step exception handler.
+	 * Return 0 if execution can resume, 1 if a SIGTRAP should be
+	 * reported.
+	 */
+	if (user_mode(regs)) {
+		if (debug_info->bps_disabled) {
+			debug_info->bps_disabled = 0;
+			toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL0, 1);
+			handled_exception = 1;
+		}
+
+		if (debug_info->wps_disabled) {
+			debug_info->wps_disabled = 0;
+			toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);
+			handled_exception = 1;
+		}
+
+		if (handled_exception) {
+			if (debug_info->suspended_step) {
+				debug_info->suspended_step = 0;
+				/* Allow exception handling to fall-through. */
+				handled_exception = 0;
+			} else {
+				user_disable_single_step(current);
+			}
+		}
+	} else if (*kernel_step != ARM_KERNEL_STEP_NONE) {
+		toggle_bp_registers(AARCH64_DBG_REG_BCR, DBG_ACTIVE_EL1, 1);
+		toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL1, 1);
+
+		if (!debug_info->wps_disabled)
+			toggle_bp_registers(AARCH64_DBG_REG_WCR, DBG_ACTIVE_EL0, 1);
+
+		if (*kernel_step != ARM_KERNEL_STEP_SUSPEND) {
+			kernel_disable_single_step();
+			handled_exception = 1;
+		} else {
+			handled_exception = 0;
+		}
+
+		*kernel_step = ARM_KERNEL_STEP_NONE;
+	}
+
+	return !handled_exception;
+}
+NOKPROBE_SYMBOL(reinstall_suspended_bps);
+
+/*
+ * Context-switcher for restoring suspended breakpoints.
+ */
+void hw_breakpoint_thread_switch(struct task_struct *next)
+{
+	/*
+	 *           current        next
+	 * disabled: 0              0     => The usual case, NOTIFY_DONE
+	 *           0              1     => Disable the registers
+	 *           1              0     => Enable the registers
+	 *           1              1     => NOTIFY_DONE. per-task bps will
+	 *                                   get taken care of by perf.
+	 */
+
+	struct debug_info *current_debug_info, *next_debug_info;
+
+	current_debug_info = &current->thread.debug;
+	next_debug_info = &next->thread.debug;
+
+	/* Update breakpoints. */
+	if (current_debug_info->bps_disabled != next_debug_info->bps_disabled)
+		toggle_bp_registers(AARCH64_DBG_REG_BCR,
+				    DBG_ACTIVE_EL0,
+				    !next_debug_info->bps_disabled);
+
+	/* Update watchpoints. */
+	if (current_debug_info->wps_disabled != next_debug_info->wps_disabled)
+		toggle_bp_registers(AARCH64_DBG_REG_WCR,
+				    DBG_ACTIVE_EL0,
+				    !next_debug_info->wps_disabled);
+}
+
+/*
+ * CPU initialisation.
+ */
+static int hw_breakpoint_reset(unsigned int cpu)
+{
+	int i;
+	struct perf_event **slots;
+	/*
+	 * When a CPU goes through cold-boot, it does not have any installed
+	 * slot, so it is safe to share the same function for restoring and
+	 * resetting breakpoints; when a CPU is hotplugged in, it goes
+	 * through the slots, which are all empty, hence it just resets control
+	 * and value for debug registers.
+	 * When this function is triggered on warm-boot through a CPU PM
+	 * notifier some slots might be initialized; if so they are
+	 * reprogrammed according to the debug slots content.
+	 */
+	for (slots = this_cpu_ptr(bp_on_reg), i = 0; i < core_num_brps; ++i) {
+		if (slots[i]) {
+			hw_breakpoint_control(slots[i], HW_BREAKPOINT_RESTORE);
+		} else {
+			write_wb_reg(AARCH64_DBG_REG_BCR, i, 0UL);
+			write_wb_reg(AARCH64_DBG_REG_BVR, i, 0UL);
+		}
+	}
+
+	for (slots = this_cpu_ptr(wp_on_reg), i = 0; i < core_num_wrps; ++i) {
+		if (slots[i]) {
+			hw_breakpoint_control(slots[i], HW_BREAKPOINT_RESTORE);
+		} else {
+			write_wb_reg(AARCH64_DBG_REG_WCR, i, 0UL);
+			write_wb_reg(AARCH64_DBG_REG_WVR, i, 0UL);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * One-time initialisation.
+ */
+static int __init arch_hw_breakpoint_init(void)
+{
+	int ret;
+
+	core_num_brps = get_num_brps();
+	core_num_wrps = get_num_wrps();
+
+	pr_info("found %d breakpoint and %d watchpoint registers.\n",
+		core_num_brps, core_num_wrps);
+
+	/* Register debug fault handlers. */
+	hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP,
+			      TRAP_HWBKPT, "hw-breakpoint handler");
+	hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP,
+			      TRAP_HWBKPT, "hw-watchpoint handler");
+
+	/*
+	 * Reset the breakpoint resources. We assume that a halting
+	 * debugger will leave the world in a nice state for us.
+	 */
+	ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING,
+			  "perf/arm64/hw_breakpoint:starting",
+			  hw_breakpoint_reset, NULL);
+	if (ret)
+		pr_err("failed to register CPU hotplug notifier: %d\n", ret);
+
+	/* Register cpu_suspend hw breakpoint restore hook */
+	cpu_suspend_set_dbg_restorer(hw_breakpoint_reset);
+
+	return ret;
+}
+arch_initcall(arch_hw_breakpoint_init);
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+}
+
+/*
+ * Dummy function to register with die_notifier.
+ */
+int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+				    unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S
new file mode 100644
index 000000000..65f76064c
--- /dev/null
+++ b/arch/arm64/kernel/hyp-stub.S
@@ -0,0 +1,258 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Hypervisor stub
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author:	Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/el2_setup.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/ptrace.h>
+#include <asm/virt.h>
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+	.align 11
+
+SYM_CODE_START(__hyp_stub_vectors)
+	ventry	el2_sync_invalid		// Synchronous EL2t
+	ventry	el2_irq_invalid			// IRQ EL2t
+	ventry	el2_fiq_invalid			// FIQ EL2t
+	ventry	el2_error_invalid		// Error EL2t
+
+	ventry	elx_sync			// Synchronous EL2h
+	ventry	el2_irq_invalid			// IRQ EL2h
+	ventry	el2_fiq_invalid			// FIQ EL2h
+	ventry	el2_error_invalid		// Error EL2h
+
+	ventry	elx_sync			// Synchronous 64-bit EL1
+	ventry	el1_irq_invalid			// IRQ 64-bit EL1
+	ventry	el1_fiq_invalid			// FIQ 64-bit EL1
+	ventry	el1_error_invalid		// Error 64-bit EL1
+
+	ventry	el1_sync_invalid		// Synchronous 32-bit EL1
+	ventry	el1_irq_invalid			// IRQ 32-bit EL1
+	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
+	ventry	el1_error_invalid		// Error 32-bit EL1
+SYM_CODE_END(__hyp_stub_vectors)
+
+	.align 11
+
+SYM_CODE_START_LOCAL(elx_sync)
+	cmp	x0, #HVC_SET_VECTORS
+	b.ne	1f
+	msr	vbar_el2, x1
+	b	9f
+
+1:	cmp	x0, #HVC_FINALISE_EL2
+	b.eq	__finalise_el2
+
+2:	cmp	x0, #HVC_SOFT_RESTART
+	b.ne	3f
+	mov	x0, x2
+	mov	x2, x4
+	mov	x4, x1
+	mov	x1, x3
+	br	x4				// no return
+
+3:	cmp	x0, #HVC_RESET_VECTORS
+	beq	9f				// Nothing to reset!
+
+	/* Someone called kvm_call_hyp() against the hyp-stub... */
+	mov_q	x0, HVC_STUB_ERR
+	eret
+
+9:	mov	x0, xzr
+	eret
+SYM_CODE_END(elx_sync)
+
+SYM_CODE_START_LOCAL(__finalise_el2)
+	finalise_el2_state
+
+	// nVHE? No way! Give me the real thing!
+	// Sanity check: MMU *must* be off
+	mrs	x1, sctlr_el2
+	tbnz	x1, #0, 1f
+
+	// Needs to be VHE capable, obviously
+	check_override id_aa64mmfr1 ID_AA64MMFR1_EL1_VH_SHIFT 0f 1f x1 x2
+
+0:	// Check whether we only want the hypervisor to run VHE, not the kernel
+	adr_l	x1, arm64_sw_feature_override
+	ldr	x2, [x1, FTR_OVR_VAL_OFFSET]
+	ldr	x1, [x1, FTR_OVR_MASK_OFFSET]
+	and	x2, x2, x1
+	ubfx	x2, x2, #ARM64_SW_FEATURE_OVERRIDE_HVHE, #4
+	cbz	x2, 2f
+
+1:	mov_q	x0, HVC_STUB_ERR
+	eret
+2:
+	// Engage the VHE magic!
+	mov_q	x0, HCR_HOST_VHE_FLAGS
+	msr	hcr_el2, x0
+	isb
+
+	// Use the EL1 allocated stack, per-cpu offset
+	mrs	x0, sp_el1
+	mov	sp, x0
+	mrs	x0, tpidr_el1
+	msr	tpidr_el2, x0
+
+	// FP configuration, vectors
+	mrs_s	x0, SYS_CPACR_EL12
+	msr	cpacr_el1, x0
+	mrs_s	x0, SYS_VBAR_EL12
+	msr	vbar_el1, x0
+
+	// Use EL2 translations for SPE & TRBE and disable access from EL1
+	mrs	x0, mdcr_el2
+	bic	x0, x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
+	bic	x0, x0, #(MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT)
+	msr	mdcr_el2, x0
+
+	// Transfer the MM state from EL1 to EL2
+	mrs_s	x0, SYS_TCR_EL12
+	msr	tcr_el1, x0
+	mrs_s	x0, SYS_TTBR0_EL12
+	msr	ttbr0_el1, x0
+	mrs_s	x0, SYS_TTBR1_EL12
+	msr	ttbr1_el1, x0
+	mrs_s	x0, SYS_MAIR_EL12
+	msr	mair_el1, x0
+	mrs	x1, REG_ID_AA64MMFR3_EL1
+	ubfx	x1, x1, #ID_AA64MMFR3_EL1_TCRX_SHIFT, #4
+	cbz	x1, .Lskip_tcr2
+	mrs	x0, REG_TCR2_EL12
+	msr	REG_TCR2_EL1, x0
+
+	// Transfer permission indirection state
+	mrs	x1, REG_ID_AA64MMFR3_EL1
+	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
+	cbz	x1, .Lskip_indirection
+	mrs	x0, REG_PIRE0_EL12
+	msr	REG_PIRE0_EL1, x0
+	mrs	x0, REG_PIR_EL12
+	msr	REG_PIR_EL1, x0
+
+.Lskip_indirection:
+.Lskip_tcr2:
+
+	isb
+
+	// Hack the exception return to stay at EL2
+	mrs	x0, spsr_el1
+	and	x0, x0, #~PSR_MODE_MASK
+	mov	x1, #PSR_MODE_EL2h
+	orr	x0, x0, x1
+	msr	spsr_el1, x0
+
+	b	enter_vhe
+SYM_CODE_END(__finalise_el2)
+
+	// At the point where we reach enter_vhe(), we run with
+	// the MMU off (which is enforced by __finalise_el2()).
+	// We thus need to be in the idmap, or everything will
+	// explode when enabling the MMU.
+
+	.pushsection	.idmap.text, "ax"
+
+SYM_CODE_START_LOCAL(enter_vhe)
+	// Invalidate TLBs before enabling the MMU
+	tlbi	vmalle1
+	dsb	nsh
+	isb
+
+	// Enable the EL2 S1 MMU, as set up from EL1
+	mrs_s	x0, SYS_SCTLR_EL12
+	set_sctlr_el1	x0
+
+	// Disable the EL1 S1 MMU for a good measure
+	mov_q	x0, INIT_SCTLR_EL1_MMU_OFF
+	msr_s	SYS_SCTLR_EL12, x0
+
+	mov	x0, xzr
+
+	eret
+SYM_CODE_END(enter_vhe)
+
+	.popsection
+
+.macro invalid_vector	label
+SYM_CODE_START_LOCAL(\label)
+	b \label
+SYM_CODE_END(\label)
+.endm
+
+	invalid_vector	el2_sync_invalid
+	invalid_vector	el2_irq_invalid
+	invalid_vector	el2_fiq_invalid
+	invalid_vector	el2_error_invalid
+	invalid_vector	el1_sync_invalid
+	invalid_vector	el1_irq_invalid
+	invalid_vector	el1_fiq_invalid
+	invalid_vector	el1_error_invalid
+
+	.popsection
+
+/*
+ * __hyp_set_vectors: Call this after boot to set the initial hypervisor
+ * vectors as part of hypervisor installation.  On an SMP system, this should
+ * be called on each CPU.
+ *
+ * x0 must be the physical address of the new vector table, and must be
+ * 2KB aligned.
+ *
+ * Before calling this, you must check that the stub hypervisor is installed
+ * everywhere, by waiting for any secondary CPUs to be brought up and then
+ * checking that is_hyp_mode_available() is true.
+ *
+ * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
+ * something else went wrong... in such cases, trying to install a new
+ * hypervisor is unlikely to work as desired.
+ *
+ * When you call into your shiny new hypervisor, sp_el2 will contain junk,
+ * so you will need to set that to something sensible at the new hypervisor's
+ * initialisation entry point.
+ */
+
+SYM_FUNC_START(__hyp_set_vectors)
+	mov	x1, x0
+	mov	x0, #HVC_SET_VECTORS
+	hvc	#0
+	ret
+SYM_FUNC_END(__hyp_set_vectors)
+
+SYM_FUNC_START(__hyp_reset_vectors)
+	mov	x0, #HVC_RESET_VECTORS
+	hvc	#0
+	ret
+SYM_FUNC_END(__hyp_reset_vectors)
+
+/*
+ * Entry point to finalise EL2 and switch to VHE if deemed capable
+ *
+ * w0: boot mode, as returned by init_kernel_el()
+ */
+SYM_FUNC_START(finalise_el2)
+	// Need to have booted at EL2
+	cmp	w0, #BOOT_CPU_MODE_EL2
+	b.ne	1f
+
+	// and still be at EL1
+	mrs	x0, CurrentEL
+	cmp	x0, #CurrentEL_EL1
+	b.ne	1f
+
+	mov	x0, #HVC_FINALISE_EL2
+	hvc	#0
+1:
+	ret
+SYM_FUNC_END(finalise_el2)
diff --git a/arch/arm64/kernel/idle.c b/arch/arm64/kernel/idle.c
new file mode 100644
index 000000000..c1125753f
--- /dev/null
+++ b/arch/arm64/kernel/idle.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Low-level idle sequences
+ */
+
+#include <linux/cpu.h>
+#include <linux/irqflags.h>
+
+#include <asm/barrier.h>
+#include <asm/cpuidle.h>
+#include <asm/cpufeature.h>
+#include <asm/sysreg.h>
+
+/*
+ *	cpu_do_idle()
+ *
+ *	Idle the processor (wait for interrupt).
+ *
+ *	If the CPU supports priority masking we must do additional work to
+ *	ensure that interrupts are not masked at the PMR (because the core will
+ *	not wake up if we block the wake up signal in the interrupt controller).
+ */
+void noinstr cpu_do_idle(void)
+{
+	struct arm_cpuidle_irq_context context;
+
+	arm_cpuidle_save_irq_context(&context);
+
+	dsb(sy);
+	wfi();
+
+	arm_cpuidle_restore_irq_context(&context);
+}
+
+/*
+ * This is our default idle handler.
+ */
+void noinstr arch_cpu_idle(void)
+{
+	/*
+	 * This should do all the clock switching and wait for interrupt
+	 * tricks
+	 */
+	cpu_do_idle();
+}
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
new file mode 100644
index 000000000..3addc09f8
--- /dev/null
+++ b/arch/arm64/kernel/idreg-override.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Early cpufeature override framework
+ *
+ * Copyright (C) 2020 Google LLC
+ * Author: Marc Zyngier <maz@kernel.org>
+ */
+
+#include <linux/ctype.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/setup.h>
+
+#define FTR_DESC_NAME_LEN	20
+#define FTR_DESC_FIELD_LEN	10
+#define FTR_ALIAS_NAME_LEN	30
+#define FTR_ALIAS_OPTION_LEN	116
+
+static u64 __boot_status __initdata;
+
+struct ftr_set_desc {
+	char 				name[FTR_DESC_NAME_LEN];
+	struct arm64_ftr_override	*override;
+	struct {
+		char			name[FTR_DESC_FIELD_LEN];
+		u8			shift;
+		u8			width;
+		bool			(*filter)(u64 val);
+	} 				fields[];
+};
+
+#define FIELD(n, s, f)	{ .name = n, .shift = s, .width = 4, .filter = f }
+
+static bool __init mmfr1_vh_filter(u64 val)
+{
+	/*
+	 * If we ever reach this point while running VHE, we're
+	 * guaranteed to be on one of these funky, VHE-stuck CPUs. If
+	 * the user was trying to force nVHE on us, proceed with
+	 * attitude adjustment.
+	 */
+	return !(__boot_status == (BOOT_CPU_FLAG_E2H | BOOT_CPU_MODE_EL2) &&
+		 val == 0);
+}
+
+static const struct ftr_set_desc mmfr1 __initconst = {
+	.name		= "id_aa64mmfr1",
+	.override	= &id_aa64mmfr1_override,
+	.fields		= {
+		FIELD("vh", ID_AA64MMFR1_EL1_VH_SHIFT, mmfr1_vh_filter),
+		{}
+	},
+};
+
+static bool __init pfr0_sve_filter(u64 val)
+{
+	/*
+	 * Disabling SVE also means disabling all the features that
+	 * are associated with it. The easiest way to do it is just to
+	 * override id_aa64zfr0_el1 to be 0.
+	 */
+	if (!val) {
+		id_aa64zfr0_override.val = 0;
+		id_aa64zfr0_override.mask = GENMASK(63, 0);
+	}
+
+	return true;
+}
+
+static const struct ftr_set_desc pfr0 __initconst = {
+	.name		= "id_aa64pfr0",
+	.override	= &id_aa64pfr0_override,
+	.fields		= {
+	        FIELD("sve", ID_AA64PFR0_EL1_SVE_SHIFT, pfr0_sve_filter),
+		{}
+	},
+};
+
+static bool __init pfr1_sme_filter(u64 val)
+{
+	/*
+	 * Similarly to SVE, disabling SME also means disabling all
+	 * the features that are associated with it. Just set
+	 * id_aa64smfr0_el1 to 0 and don't look back.
+	 */
+	if (!val) {
+		id_aa64smfr0_override.val = 0;
+		id_aa64smfr0_override.mask = GENMASK(63, 0);
+	}
+
+	return true;
+}
+
+static const struct ftr_set_desc pfr1 __initconst = {
+	.name		= "id_aa64pfr1",
+	.override	= &id_aa64pfr1_override,
+	.fields		= {
+		FIELD("bt", ID_AA64PFR1_EL1_BT_SHIFT, NULL ),
+		FIELD("mte", ID_AA64PFR1_EL1_MTE_SHIFT, NULL),
+		FIELD("sme", ID_AA64PFR1_EL1_SME_SHIFT, pfr1_sme_filter),
+		{}
+	},
+};
+
+static const struct ftr_set_desc isar1 __initconst = {
+	.name		= "id_aa64isar1",
+	.override	= &id_aa64isar1_override,
+	.fields		= {
+		FIELD("gpi", ID_AA64ISAR1_EL1_GPI_SHIFT, NULL),
+		FIELD("gpa", ID_AA64ISAR1_EL1_GPA_SHIFT, NULL),
+		FIELD("api", ID_AA64ISAR1_EL1_API_SHIFT, NULL),
+		FIELD("apa", ID_AA64ISAR1_EL1_APA_SHIFT, NULL),
+		{}
+	},
+};
+
+static const struct ftr_set_desc isar2 __initconst = {
+	.name		= "id_aa64isar2",
+	.override	= &id_aa64isar2_override,
+	.fields		= {
+		FIELD("gpa3", ID_AA64ISAR2_EL1_GPA3_SHIFT, NULL),
+		FIELD("apa3", ID_AA64ISAR2_EL1_APA3_SHIFT, NULL),
+		FIELD("mops", ID_AA64ISAR2_EL1_MOPS_SHIFT, NULL),
+		{}
+	},
+};
+
+static const struct ftr_set_desc smfr0 __initconst = {
+	.name		= "id_aa64smfr0",
+	.override	= &id_aa64smfr0_override,
+	.fields		= {
+		FIELD("smever", ID_AA64SMFR0_EL1_SMEver_SHIFT, NULL),
+		/* FA64 is a one bit field... :-/ */
+		{ "fa64", ID_AA64SMFR0_EL1_FA64_SHIFT, 1, },
+		{}
+	},
+};
+
+static bool __init hvhe_filter(u64 val)
+{
+	u64 mmfr1 = read_sysreg(id_aa64mmfr1_el1);
+
+	return (val == 1 &&
+		lower_32_bits(__boot_status) == BOOT_CPU_MODE_EL2 &&
+		cpuid_feature_extract_unsigned_field(mmfr1,
+						     ID_AA64MMFR1_EL1_VH_SHIFT));
+}
+
+static const struct ftr_set_desc sw_features __initconst = {
+	.name		= "arm64_sw",
+	.override	= &arm64_sw_feature_override,
+	.fields		= {
+		FIELD("nokaslr", ARM64_SW_FEATURE_OVERRIDE_NOKASLR, NULL),
+		FIELD("hvhe", ARM64_SW_FEATURE_OVERRIDE_HVHE, hvhe_filter),
+		{}
+	},
+};
+
+static const struct ftr_set_desc * const regs[] __initconst = {
+	&mmfr1,
+	&pfr0,
+	&pfr1,
+	&isar1,
+	&isar2,
+	&smfr0,
+	&sw_features,
+};
+
+static const struct {
+	char	alias[FTR_ALIAS_NAME_LEN];
+	char	feature[FTR_ALIAS_OPTION_LEN];
+} aliases[] __initconst = {
+	{ "kvm-arm.mode=nvhe",		"id_aa64mmfr1.vh=0" },
+	{ "kvm-arm.mode=protected",	"id_aa64mmfr1.vh=0" },
+	{ "arm64.nosve",		"id_aa64pfr0.sve=0" },
+	{ "arm64.nosme",		"id_aa64pfr1.sme=0" },
+	{ "arm64.nobti",		"id_aa64pfr1.bt=0" },
+	{ "arm64.nopauth",
+	  "id_aa64isar1.gpi=0 id_aa64isar1.gpa=0 "
+	  "id_aa64isar1.api=0 id_aa64isar1.apa=0 "
+	  "id_aa64isar2.gpa3=0 id_aa64isar2.apa3=0"	   },
+	{ "arm64.nomops",		"id_aa64isar2.mops=0" },
+	{ "arm64.nomte",		"id_aa64pfr1.mte=0" },
+	{ "nokaslr",			"arm64_sw.nokaslr=1" },
+};
+
+static int __init parse_nokaslr(char *unused)
+{
+	/* nokaslr param handling is done by early cpufeature code */
+	return 0;
+}
+early_param("nokaslr", parse_nokaslr);
+
+static int __init find_field(const char *cmdline,
+			     const struct ftr_set_desc *reg, int f, u64 *v)
+{
+	char opt[FTR_DESC_NAME_LEN + FTR_DESC_FIELD_LEN + 2];
+	int len;
+
+	len = snprintf(opt, ARRAY_SIZE(opt), "%s.%s=",
+		       reg->name, reg->fields[f].name);
+
+	if (!parameqn(cmdline, opt, len))
+		return -1;
+
+	return kstrtou64(cmdline + len, 0, v);
+}
+
+static void __init match_options(const char *cmdline)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		int f;
+
+		if (!regs[i]->override)
+			continue;
+
+		for (f = 0; strlen(regs[i]->fields[f].name); f++) {
+			u64 shift = regs[i]->fields[f].shift;
+			u64 width = regs[i]->fields[f].width ?: 4;
+			u64 mask = GENMASK_ULL(shift + width - 1, shift);
+			u64 v;
+
+			if (find_field(cmdline, regs[i], f, &v))
+				continue;
+
+			/*
+			 * If an override gets filtered out, advertise
+			 * it by setting the value to the all-ones while
+			 * clearing the mask... Yes, this is fragile.
+			 */
+			if (regs[i]->fields[f].filter &&
+			    !regs[i]->fields[f].filter(v)) {
+				regs[i]->override->val  |= mask;
+				regs[i]->override->mask &= ~mask;
+				continue;
+			}
+
+			regs[i]->override->val  &= ~mask;
+			regs[i]->override->val  |= (v << shift) & mask;
+			regs[i]->override->mask |= mask;
+
+			return;
+		}
+	}
+}
+
+static __init void __parse_cmdline(const char *cmdline, bool parse_aliases)
+{
+	do {
+		char buf[256];
+		size_t len;
+		int i;
+
+		cmdline = skip_spaces(cmdline);
+
+		for (len = 0; cmdline[len] && !isspace(cmdline[len]); len++);
+		if (!len)
+			return;
+
+		len = min(len, ARRAY_SIZE(buf) - 1);
+		memcpy(buf, cmdline, len);
+		buf[len] = '\0';
+
+		if (strcmp(buf, "--") == 0)
+			return;
+
+		cmdline += len;
+
+		match_options(buf);
+
+		for (i = 0; parse_aliases && i < ARRAY_SIZE(aliases); i++)
+			if (parameq(buf, aliases[i].alias))
+				__parse_cmdline(aliases[i].feature, false);
+	} while (1);
+}
+
+static __init const u8 *get_bootargs_cmdline(void)
+{
+	const u8 *prop;
+	void *fdt;
+	int node;
+
+	fdt = get_early_fdt_ptr();
+	if (!fdt)
+		return NULL;
+
+	node = fdt_path_offset(fdt, "/chosen");
+	if (node < 0)
+		return NULL;
+
+	prop = fdt_getprop(fdt, node, "bootargs", NULL);
+	if (!prop)
+		return NULL;
+
+	return strlen(prop) ? prop : NULL;
+}
+
+static __init void parse_cmdline(void)
+{
+	const u8 *prop = get_bootargs_cmdline();
+
+	if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !prop)
+		__parse_cmdline(CONFIG_CMDLINE, true);
+
+	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && prop)
+		__parse_cmdline(prop, true);
+}
+
+/* Keep checkers quiet */
+void init_feature_override(u64 boot_status);
+
+asmlinkage void __init init_feature_override(u64 boot_status)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		if (regs[i]->override) {
+			regs[i]->override->val  = 0;
+			regs[i]->override->mask = 0;
+		}
+	}
+
+	__boot_status = boot_status;
+
+	parse_cmdline();
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		if (regs[i]->override)
+			dcache_clean_inval_poc((unsigned long)regs[i]->override,
+					    (unsigned long)regs[i]->override +
+					    sizeof(*regs[i]->override));
+	}
+}
diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
new file mode 100644
index 000000000..35f3c7959
--- /dev/null
+++ b/arch/arm64/kernel/image-vars.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Linker script variables to be set after section resolution, as
+ * ld.lld does not like variables assigned before SECTIONS is processed.
+ */
+#ifndef __ARM64_KERNEL_IMAGE_VARS_H
+#define __ARM64_KERNEL_IMAGE_VARS_H
+
+#ifndef LINKER_SCRIPT
+#error This file should only be included in vmlinux.lds.S
+#endif
+
+PROVIDE(__efistub_primary_entry		= primary_entry);
+
+/*
+ * The EFI stub has its own symbol namespace prefixed by __efistub_, to
+ * isolate it from the kernel proper. The following symbols are legally
+ * accessed by the stub, so provide some aliases to make them accessible.
+ * Only include data symbols here, or text symbols of functions that are
+ * guaranteed to be safe when executed at another offset than they were
+ * linked at. The routines below are all implemented in assembler in a
+ * position independent manner
+ */
+PROVIDE(__efistub_caches_clean_inval_pou = __pi_caches_clean_inval_pou);
+
+PROVIDE(__efistub__text			= _text);
+PROVIDE(__efistub__end			= _end);
+PROVIDE(__efistub___inittext_end       	= __inittext_end);
+PROVIDE(__efistub__edata		= _edata);
+PROVIDE(__efistub_screen_info		= screen_info);
+PROVIDE(__efistub__ctype		= _ctype);
+
+PROVIDE(__pi___memcpy			= __pi_memcpy);
+PROVIDE(__pi___memmove			= __pi_memmove);
+PROVIDE(__pi___memset			= __pi_memset);
+
+#ifdef CONFIG_KVM
+
+/*
+ * KVM nVHE code has its own symbol namespace prefixed with __kvm_nvhe_, to
+ * separate it from the kernel proper. The following symbols are legally
+ * accessed by it, therefore provide aliases to make them linkable.
+ * Do not include symbols which may not be safely accessed under hypervisor
+ * memory mappings.
+ */
+
+/* Alternative callbacks for init-time patching of nVHE hyp code. */
+KVM_NVHE_ALIAS(kvm_patch_vector_branch);
+KVM_NVHE_ALIAS(kvm_update_va_mask);
+KVM_NVHE_ALIAS(kvm_get_kimage_voffset);
+KVM_NVHE_ALIAS(kvm_compute_final_ctr_el0);
+KVM_NVHE_ALIAS(spectre_bhb_patch_loop_iter);
+KVM_NVHE_ALIAS(spectre_bhb_patch_loop_mitigation_enable);
+KVM_NVHE_ALIAS(spectre_bhb_patch_wa3);
+KVM_NVHE_ALIAS(spectre_bhb_patch_clearbhb);
+KVM_NVHE_ALIAS(alt_cb_patch_nops);
+
+/* Global kernel state accessed by nVHE hyp code. */
+KVM_NVHE_ALIAS(kvm_vgic_global_state);
+
+/* Kernel symbols used to call panic() from nVHE hyp code (via ERET). */
+KVM_NVHE_ALIAS(nvhe_hyp_panic_handler);
+
+/* Vectors installed by hyp-init on reset HVC. */
+KVM_NVHE_ALIAS(__hyp_stub_vectors);
+
+/* Static keys which are set if a vGIC trap should be handled in hyp. */
+KVM_NVHE_ALIAS(vgic_v2_cpuif_trap);
+KVM_NVHE_ALIAS(vgic_v3_cpuif_trap);
+
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+/* Static key checked in GIC_PRIO_IRQOFF. */
+KVM_NVHE_ALIAS(gic_nonsecure_priorities);
+#endif
+
+/* EL2 exception handling */
+KVM_NVHE_ALIAS(__start___kvm_ex_table);
+KVM_NVHE_ALIAS(__stop___kvm_ex_table);
+
+/* PMU available static key */
+#ifdef CONFIG_HW_PERF_EVENTS
+KVM_NVHE_ALIAS(kvm_arm_pmu_available);
+#endif
+
+/* Position-independent library routines */
+KVM_NVHE_ALIAS_HYP(clear_page, __pi_clear_page);
+KVM_NVHE_ALIAS_HYP(copy_page, __pi_copy_page);
+KVM_NVHE_ALIAS_HYP(memcpy, __pi_memcpy);
+KVM_NVHE_ALIAS_HYP(memset, __pi_memset);
+
+#ifdef CONFIG_KASAN
+KVM_NVHE_ALIAS_HYP(__memcpy, __pi_memcpy);
+KVM_NVHE_ALIAS_HYP(__memset, __pi_memset);
+#endif
+
+/* Hyp memory sections */
+KVM_NVHE_ALIAS(__hyp_idmap_text_start);
+KVM_NVHE_ALIAS(__hyp_idmap_text_end);
+KVM_NVHE_ALIAS(__hyp_text_start);
+KVM_NVHE_ALIAS(__hyp_text_end);
+KVM_NVHE_ALIAS(__hyp_bss_start);
+KVM_NVHE_ALIAS(__hyp_bss_end);
+KVM_NVHE_ALIAS(__hyp_rodata_start);
+KVM_NVHE_ALIAS(__hyp_rodata_end);
+
+/* pKVM static key */
+KVM_NVHE_ALIAS(kvm_protected_mode_initialized);
+
+#endif /* CONFIG_KVM */
+
+#ifdef CONFIG_EFI_ZBOOT
+_kernel_codesize = ABSOLUTE(__inittext_end - _text);
+#endif
+
+#endif /* __ARM64_KERNEL_IMAGE_VARS_H */
diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h
new file mode 100644
index 000000000..7bc3ba897
--- /dev/null
+++ b/arch/arm64/kernel/image.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Linker script macros to generate Image header fields.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ */
+#ifndef __ARM64_KERNEL_IMAGE_H
+#define __ARM64_KERNEL_IMAGE_H
+
+#ifndef LINKER_SCRIPT
+#error This file should only be included in vmlinux.lds.S
+#endif
+
+#include <asm/image.h>
+
+/*
+ * There aren't any ELF relocations we can use to endian-swap values known only
+ * at link time (e.g. the subtraction of two symbol addresses), so we must get
+ * the linker to endian-swap certain values before emitting them.
+ *
+ * Note that, in order for this to work when building the ELF64 PIE executable
+ * (for KASLR), these values should not be referenced via R_AARCH64_ABS64
+ * relocations, since these are fixed up at runtime rather than at build time
+ * when PIE is in effect. So we need to split them up in 32-bit high and low
+ * words.
+ */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define DATA_LE32(data)				\
+	((((data) & 0x000000ff) << 24) |	\
+	 (((data) & 0x0000ff00) << 8)  |	\
+	 (((data) & 0x00ff0000) >> 8)  |	\
+	 (((data) & 0xff000000) >> 24))
+#else
+#define DATA_LE32(data) ((data) & 0xffffffff)
+#endif
+
+#define DEFINE_IMAGE_LE64(sym, data)				\
+	sym##_lo32 = DATA_LE32((data) & 0xffffffff);		\
+	sym##_hi32 = DATA_LE32((data) >> 32)
+
+#define __HEAD_FLAG(field)	(__HEAD_FLAG_##field << \
+					ARM64_IMAGE_FLAG_##field##_SHIFT)
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define __HEAD_FLAG_BE		ARM64_IMAGE_FLAG_BE
+#else
+#define __HEAD_FLAG_BE		ARM64_IMAGE_FLAG_LE
+#endif
+
+#define __HEAD_FLAG_PAGE_SIZE	((PAGE_SHIFT - 10) / 2)
+
+#define __HEAD_FLAG_PHYS_BASE	1
+
+#define __HEAD_FLAGS		(__HEAD_FLAG(BE)	| \
+				 __HEAD_FLAG(PAGE_SIZE) | \
+				 __HEAD_FLAG(PHYS_BASE))
+
+/*
+ * These will output as part of the Image header, which should be little-endian
+ * regardless of the endianness of the kernel. While constant values could be
+ * endian swapped in head.S, all are done here for consistency.
+ */
+#define HEAD_SYMBOLS						\
+	DEFINE_IMAGE_LE64(_kernel_size_le, _end - _text);	\
+	DEFINE_IMAGE_LE64(_kernel_flags_le, __HEAD_FLAGS);
+
+#endif /* __ARM64_KERNEL_IMAGE_H */
diff --git a/arch/arm64/kernel/io.c b/arch/arm64/kernel/io.c
new file mode 100644
index 000000000..aa7a4ec6a
--- /dev/null
+++ b/arch/arm64/kernel/io.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/io.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/io.h>
+
+/*
+ * Copy data from IO memory space to "real" memory space.
+ */
+void __memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
+{
+	while (count && !IS_ALIGNED((unsigned long)from, 8)) {
+		*(u8 *)to = __raw_readb(from);
+		from++;
+		to++;
+		count--;
+	}
+
+	while (count >= 8) {
+		*(u64 *)to = __raw_readq(from);
+		from += 8;
+		to += 8;
+		count -= 8;
+	}
+
+	while (count) {
+		*(u8 *)to = __raw_readb(from);
+		from++;
+		to++;
+		count--;
+	}
+}
+EXPORT_SYMBOL(__memcpy_fromio);
+
+/*
+ * Copy data from "real" memory space to IO memory space.
+ */
+void __memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
+{
+	while (count && !IS_ALIGNED((unsigned long)to, 8)) {
+		__raw_writeb(*(u8 *)from, to);
+		from++;
+		to++;
+		count--;
+	}
+
+	while (count >= 8) {
+		__raw_writeq(*(u64 *)from, to);
+		from += 8;
+		to += 8;
+		count -= 8;
+	}
+
+	while (count) {
+		__raw_writeb(*(u8 *)from, to);
+		from++;
+		to++;
+		count--;
+	}
+}
+EXPORT_SYMBOL(__memcpy_toio);
+
+/*
+ * "memset" on IO memory space.
+ */
+void __memset_io(volatile void __iomem *dst, int c, size_t count)
+{
+	u64 qc = (u8)c;
+
+	qc |= qc << 8;
+	qc |= qc << 16;
+	qc |= qc << 32;
+
+	while (count && !IS_ALIGNED((unsigned long)dst, 8)) {
+		__raw_writeb(c, dst);
+		dst++;
+		count--;
+	}
+
+	while (count >= 8) {
+		__raw_writeq(qc, dst);
+		dst += 8;
+		count -= 8;
+	}
+
+	while (count) {
+		__raw_writeb(c, dst);
+		dst++;
+		count--;
+	}
+}
+EXPORT_SYMBOL(__memset_io);
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
new file mode 100644
index 000000000..6ad5c6ef5
--- /dev/null
+++ b/arch/arm64/kernel/irq.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/irq.c
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
+ * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
+ * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/kprobes.h>
+#include <linux/memory.h>
+#include <linux/scs.h>
+#include <linux/seq_file.h>
+#include <linux/smp.h>
+#include <linux/vmalloc.h>
+#include <asm/daifflags.h>
+#include <asm/exception.h>
+#include <asm/softirq_stack.h>
+#include <asm/stacktrace.h>
+#include <asm/vmap_stack.h>
+
+/* Only access this in an NMI enter/exit */
+DEFINE_PER_CPU(struct nmi_ctx, nmi_contexts);
+
+DEFINE_PER_CPU(unsigned long *, irq_stack_ptr);
+
+
+DECLARE_PER_CPU(unsigned long *, irq_shadow_call_stack_ptr);
+
+#ifdef CONFIG_SHADOW_CALL_STACK
+DEFINE_PER_CPU(unsigned long *, irq_shadow_call_stack_ptr);
+#endif
+
+static void init_irq_scs(void)
+{
+	int cpu;
+
+	if (!scs_is_enabled())
+		return;
+
+	for_each_possible_cpu(cpu)
+		per_cpu(irq_shadow_call_stack_ptr, cpu) =
+			scs_alloc(cpu_to_node(cpu));
+}
+
+#ifdef CONFIG_VMAP_STACK
+static void init_irq_stacks(void)
+{
+	int cpu;
+	unsigned long *p;
+
+	for_each_possible_cpu(cpu) {
+		p = arch_alloc_vmap_stack(IRQ_STACK_SIZE, cpu_to_node(cpu));
+		per_cpu(irq_stack_ptr, cpu) = p;
+	}
+}
+#else
+/* irq stack only needs to be 16 byte aligned - not IRQ_STACK_SIZE aligned. */
+DEFINE_PER_CPU_ALIGNED(unsigned long [IRQ_STACK_SIZE/sizeof(long)], irq_stack);
+
+static void init_irq_stacks(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu)
+		per_cpu(irq_stack_ptr, cpu) = per_cpu(irq_stack, cpu);
+}
+#endif
+
+#ifndef CONFIG_PREEMPT_RT
+static void ____do_softirq(struct pt_regs *regs)
+{
+	__do_softirq();
+}
+
+void do_softirq_own_stack(void)
+{
+	call_on_irq_stack(NULL, ____do_softirq);
+}
+#endif
+
+static void default_handle_irq(struct pt_regs *regs)
+{
+	panic("IRQ taken without a root IRQ handler\n");
+}
+
+static void default_handle_fiq(struct pt_regs *regs)
+{
+	panic("FIQ taken without a root FIQ handler\n");
+}
+
+void (*handle_arch_irq)(struct pt_regs *) __ro_after_init = default_handle_irq;
+void (*handle_arch_fiq)(struct pt_regs *) __ro_after_init = default_handle_fiq;
+
+int __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+	if (handle_arch_irq != default_handle_irq)
+		return -EBUSY;
+
+	handle_arch_irq = handle_irq;
+	pr_info("Root IRQ handler: %ps\n", handle_irq);
+	return 0;
+}
+
+int __init set_handle_fiq(void (*handle_fiq)(struct pt_regs *))
+{
+	if (handle_arch_fiq != default_handle_fiq)
+		return -EBUSY;
+
+	handle_arch_fiq = handle_fiq;
+	pr_info("Root FIQ handler: %ps\n", handle_fiq);
+	return 0;
+}
+
+void __init init_IRQ(void)
+{
+	init_irq_stacks();
+	init_irq_scs();
+	irqchip_init();
+
+	if (system_uses_irq_prio_masking()) {
+		/*
+		 * Now that we have a stack for our IRQ handler, set
+		 * the PMR/PSR pair to a consistent state.
+		 */
+		WARN_ON(read_sysreg(daif) & PSR_A_BIT);
+		local_daif_restore(DAIF_PROCCTX_NOIRQ);
+	}
+}
diff --git a/arch/arm64/kernel/jump_label.c b/arch/arm64/kernel/jump_label.c
new file mode 100644
index 000000000..faf88ec9c
--- /dev/null
+++ b/arch/arm64/kernel/jump_label.c
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Huawei Ltd.
+ * Author: Jiang Liu <liuj97@gmail.com>
+ *
+ * Based on arch/arm/kernel/jump_label.c
+ */
+#include <linux/kernel.h>
+#include <linux/jump_label.h>
+#include <asm/insn.h>
+#include <asm/patching.h>
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
+	void *addr = (void *)jump_entry_code(entry);
+	u32 insn;
+
+	if (type == JUMP_LABEL_JMP) {
+		insn = aarch64_insn_gen_branch_imm(jump_entry_code(entry),
+						   jump_entry_target(entry),
+						   AARCH64_INSN_BRANCH_NOLINK);
+	} else {
+		insn = aarch64_insn_gen_nop();
+	}
+
+	aarch64_insn_patch_text_nosync(addr, insn);
+}
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
new file mode 100644
index 000000000..94a269cd1
--- /dev/null
+++ b/arch/arm64/kernel/kaslr.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/cache.h>
+#include <linux/init.h>
+#include <linux/printk.h>
+
+#include <asm/cpufeature.h>
+#include <asm/memory.h>
+
+u16 __initdata memstart_offset_seed;
+
+bool __ro_after_init __kaslr_is_enabled = false;
+
+void __init kaslr_init(void)
+{
+	if (cpuid_feature_extract_unsigned_field(arm64_sw_feature_override.val &
+						 arm64_sw_feature_override.mask,
+						 ARM64_SW_FEATURE_OVERRIDE_NOKASLR)) {
+		pr_info("KASLR disabled on command line\n");
+		return;
+	}
+
+	/*
+	 * The KASLR offset modulo MIN_KIMG_ALIGN is taken from the physical
+	 * placement of the image rather than from the seed, so a displacement
+	 * of less than MIN_KIMG_ALIGN means that no seed was provided.
+	 */
+	if (kaslr_offset() < MIN_KIMG_ALIGN) {
+		pr_warn("KASLR disabled due to lack of seed\n");
+		return;
+	}
+
+	pr_info("KASLR enabled\n");
+	__kaslr_is_enabled = true;
+}
diff --git a/arch/arm64/kernel/kexec_image.c b/arch/arm64/kernel/kexec_image.c
new file mode 100644
index 000000000..636be6715
--- /dev/null
+++ b/arch/arm64/kernel/kexec_image.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Kexec image loader
+
+ * Copyright (C) 2018 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+
+#define pr_fmt(fmt)	"kexec_file(Image): " fmt
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/pe.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+#include <asm/cpufeature.h>
+#include <asm/image.h>
+#include <asm/memory.h>
+
+static int image_probe(const char *kernel_buf, unsigned long kernel_len)
+{
+	const struct arm64_image_header *h =
+		(const struct arm64_image_header *)(kernel_buf);
+
+	if (!h || (kernel_len < sizeof(*h)))
+		return -EINVAL;
+
+	if (memcmp(&h->magic, ARM64_IMAGE_MAGIC, sizeof(h->magic)))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void *image_load(struct kimage *image,
+				char *kernel, unsigned long kernel_len,
+				char *initrd, unsigned long initrd_len,
+				char *cmdline, unsigned long cmdline_len)
+{
+	struct arm64_image_header *h;
+	u64 flags, value;
+	bool be_image, be_kernel;
+	struct kexec_buf kbuf;
+	unsigned long text_offset, kernel_segment_number;
+	struct kexec_segment *kernel_segment;
+	int ret;
+
+	/*
+	 * We require a kernel with an unambiguous Image header. Per
+	 * Documentation/arch/arm64/booting.rst, this is the case when image_size
+	 * is non-zero (practically speaking, since v3.17).
+	 */
+	h = (struct arm64_image_header *)kernel;
+	if (!h->image_size)
+		return ERR_PTR(-EINVAL);
+
+	/* Check cpu features */
+	flags = le64_to_cpu(h->flags);
+	be_image = arm64_image_flag_field(flags, ARM64_IMAGE_FLAG_BE);
+	be_kernel = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+	if ((be_image != be_kernel) && !system_supports_mixed_endian())
+		return ERR_PTR(-EINVAL);
+
+	value = arm64_image_flag_field(flags, ARM64_IMAGE_FLAG_PAGE_SIZE);
+	if (((value == ARM64_IMAGE_FLAG_PAGE_SIZE_4K) &&
+			!system_supports_4kb_granule()) ||
+	    ((value == ARM64_IMAGE_FLAG_PAGE_SIZE_64K) &&
+			!system_supports_64kb_granule()) ||
+	    ((value == ARM64_IMAGE_FLAG_PAGE_SIZE_16K) &&
+			!system_supports_16kb_granule()))
+		return ERR_PTR(-EINVAL);
+
+	/* Load the kernel */
+	kbuf.image = image;
+	kbuf.buf_min = 0;
+	kbuf.buf_max = ULONG_MAX;
+	kbuf.top_down = false;
+
+	kbuf.buffer = kernel;
+	kbuf.bufsz = kernel_len;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	kbuf.memsz = le64_to_cpu(h->image_size);
+	text_offset = le64_to_cpu(h->text_offset);
+	kbuf.buf_align = MIN_KIMG_ALIGN;
+
+	/* Adjust kernel segment with TEXT_OFFSET */
+	kbuf.memsz += text_offset;
+
+	kernel_segment_number = image->nr_segments;
+
+	/*
+	 * The location of the kernel segment may make it impossible to satisfy
+	 * the other segment requirements, so we try repeatedly to find a
+	 * location that will work.
+	 */
+	while ((ret = kexec_add_buffer(&kbuf)) == 0) {
+		/* Try to load additional data */
+		kernel_segment = &image->segment[kernel_segment_number];
+		ret = load_other_segments(image, kernel_segment->mem,
+					  kernel_segment->memsz, initrd,
+					  initrd_len, cmdline);
+		if (!ret)
+			break;
+
+		/*
+		 * We couldn't find space for the other segments; erase the
+		 * kernel segment and try the next available hole.
+		 */
+		image->nr_segments -= 1;
+		kbuf.buf_min = kernel_segment->mem + kernel_segment->memsz;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	}
+
+	if (ret) {
+		pr_err("Could not find any suitable kernel location!");
+		return ERR_PTR(ret);
+	}
+
+	kernel_segment = &image->segment[kernel_segment_number];
+	kernel_segment->mem += text_offset;
+	kernel_segment->memsz -= text_offset;
+	image->start = kernel_segment->mem;
+
+	pr_debug("Loaded kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+				kernel_segment->mem, kbuf.bufsz,
+				kernel_segment->memsz);
+
+	return NULL;
+}
+
+const struct kexec_file_ops kexec_image_ops = {
+	.probe = image_probe,
+	.load = image_load,
+#ifdef CONFIG_KEXEC_IMAGE_VERIFY_SIG
+	.verify_sig = kexec_kernel_verify_pe_sig,
+#endif
+};
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
new file mode 100644
index 000000000..4e1f983df
--- /dev/null
+++ b/arch/arm64/kernel/kgdb.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AArch64 KGDB support
+ *
+ * Based on arch/arm/kernel/kgdb.c
+ *
+ * Copyright (C) 2013 Cavium Inc.
+ * Author: Vijaya Kumar K <vijaya.kumar@caviumnetworks.com>
+ */
+
+#include <linux/bug.h>
+#include <linux/irq.h>
+#include <linux/kdebug.h>
+#include <linux/kgdb.h>
+#include <linux/kprobes.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/patching.h>
+#include <asm/traps.h>
+
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
+	{ "x0", 8, offsetof(struct pt_regs, regs[0])},
+	{ "x1", 8, offsetof(struct pt_regs, regs[1])},
+	{ "x2", 8, offsetof(struct pt_regs, regs[2])},
+	{ "x3", 8, offsetof(struct pt_regs, regs[3])},
+	{ "x4", 8, offsetof(struct pt_regs, regs[4])},
+	{ "x5", 8, offsetof(struct pt_regs, regs[5])},
+	{ "x6", 8, offsetof(struct pt_regs, regs[6])},
+	{ "x7", 8, offsetof(struct pt_regs, regs[7])},
+	{ "x8", 8, offsetof(struct pt_regs, regs[8])},
+	{ "x9", 8, offsetof(struct pt_regs, regs[9])},
+	{ "x10", 8, offsetof(struct pt_regs, regs[10])},
+	{ "x11", 8, offsetof(struct pt_regs, regs[11])},
+	{ "x12", 8, offsetof(struct pt_regs, regs[12])},
+	{ "x13", 8, offsetof(struct pt_regs, regs[13])},
+	{ "x14", 8, offsetof(struct pt_regs, regs[14])},
+	{ "x15", 8, offsetof(struct pt_regs, regs[15])},
+	{ "x16", 8, offsetof(struct pt_regs, regs[16])},
+	{ "x17", 8, offsetof(struct pt_regs, regs[17])},
+	{ "x18", 8, offsetof(struct pt_regs, regs[18])},
+	{ "x19", 8, offsetof(struct pt_regs, regs[19])},
+	{ "x20", 8, offsetof(struct pt_regs, regs[20])},
+	{ "x21", 8, offsetof(struct pt_regs, regs[21])},
+	{ "x22", 8, offsetof(struct pt_regs, regs[22])},
+	{ "x23", 8, offsetof(struct pt_regs, regs[23])},
+	{ "x24", 8, offsetof(struct pt_regs, regs[24])},
+	{ "x25", 8, offsetof(struct pt_regs, regs[25])},
+	{ "x26", 8, offsetof(struct pt_regs, regs[26])},
+	{ "x27", 8, offsetof(struct pt_regs, regs[27])},
+	{ "x28", 8, offsetof(struct pt_regs, regs[28])},
+	{ "x29", 8, offsetof(struct pt_regs, regs[29])},
+	{ "x30", 8, offsetof(struct pt_regs, regs[30])},
+	{ "sp", 8, offsetof(struct pt_regs, sp)},
+	{ "pc", 8, offsetof(struct pt_regs, pc)},
+	/*
+	 * struct pt_regs thinks PSTATE is 64-bits wide but gdb remote
+	 * protocol disagrees. Therefore we must extract only the lower
+	 * 32-bits. Look for the big comment in asm/kgdb.h for more
+	 * detail.
+	 */
+	{ "pstate", 4, offsetof(struct pt_regs, pstate)
+#ifdef CONFIG_CPU_BIG_ENDIAN
+							+ 4
+#endif
+	},
+	{ "v0", 16, -1 },
+	{ "v1", 16, -1 },
+	{ "v2", 16, -1 },
+	{ "v3", 16, -1 },
+	{ "v4", 16, -1 },
+	{ "v5", 16, -1 },
+	{ "v6", 16, -1 },
+	{ "v7", 16, -1 },
+	{ "v8", 16, -1 },
+	{ "v9", 16, -1 },
+	{ "v10", 16, -1 },
+	{ "v11", 16, -1 },
+	{ "v12", 16, -1 },
+	{ "v13", 16, -1 },
+	{ "v14", 16, -1 },
+	{ "v15", 16, -1 },
+	{ "v16", 16, -1 },
+	{ "v17", 16, -1 },
+	{ "v18", 16, -1 },
+	{ "v19", 16, -1 },
+	{ "v20", 16, -1 },
+	{ "v21", 16, -1 },
+	{ "v22", 16, -1 },
+	{ "v23", 16, -1 },
+	{ "v24", 16, -1 },
+	{ "v25", 16, -1 },
+	{ "v26", 16, -1 },
+	{ "v27", 16, -1 },
+	{ "v28", 16, -1 },
+	{ "v29", 16, -1 },
+	{ "v30", 16, -1 },
+	{ "v31", 16, -1 },
+	{ "fpsr", 4, -1 },
+	{ "fpcr", 4, -1 },
+};
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+		       dbg_reg_def[regno].size);
+	else
+		memset(mem, 0, dbg_reg_def[regno].size);
+	return dbg_reg_def[regno].name;
+}
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return -EINVAL;
+
+	if (dbg_reg_def[regno].offset != -1)
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	return 0;
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	struct cpu_context *cpu_context = &task->thread.cpu_context;
+
+	/* Initialize to zero */
+	memset((char *)gdb_regs, 0, NUMREGBYTES);
+
+	gdb_regs[19] = cpu_context->x19;
+	gdb_regs[20] = cpu_context->x20;
+	gdb_regs[21] = cpu_context->x21;
+	gdb_regs[22] = cpu_context->x22;
+	gdb_regs[23] = cpu_context->x23;
+	gdb_regs[24] = cpu_context->x24;
+	gdb_regs[25] = cpu_context->x25;
+	gdb_regs[26] = cpu_context->x26;
+	gdb_regs[27] = cpu_context->x27;
+	gdb_regs[28] = cpu_context->x28;
+	gdb_regs[29] = cpu_context->fp;
+
+	gdb_regs[31] = cpu_context->sp;
+	gdb_regs[32] = cpu_context->pc;
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->pc = pc;
+}
+
+static int compiled_break;
+
+static void kgdb_arch_update_addr(struct pt_regs *regs,
+				char *remcom_in_buffer)
+{
+	unsigned long addr;
+	char *ptr;
+
+	ptr = &remcom_in_buffer[1];
+	if (kgdb_hex2long(&ptr, &addr))
+		kgdb_arch_set_pc(regs, addr);
+	else if (compiled_break == 1)
+		kgdb_arch_set_pc(regs, regs->pc + 4);
+
+	compiled_break = 0;
+}
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+			       int err_code, char *remcom_in_buffer,
+			       char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	int err;
+
+	switch (remcom_in_buffer[0]) {
+	case 'D':
+	case 'k':
+		/*
+		 * Packet D (Detach), k (kill). No special handling
+		 * is required here. Handle same as c packet.
+		 */
+	case 'c':
+		/*
+		 * Packet c (Continue) to continue executing.
+		 * Set pc to required address.
+		 * Try to read optional parameter and set pc.
+		 * If this was a compiled breakpoint, we need to move
+		 * to the next instruction else we will just breakpoint
+		 * over and over again.
+		 */
+		kgdb_arch_update_addr(linux_regs, remcom_in_buffer);
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		kgdb_single_step =  0;
+
+		/*
+		 * Received continue command, disable single step
+		 */
+		if (kernel_active_single_step())
+			kernel_disable_single_step();
+
+		err = 0;
+		break;
+	case 's':
+		/*
+		 * Update step address value with address passed
+		 * with step packet.
+		 * On debug exception return PC is copied to ELR
+		 * So just update PC.
+		 * If no step address is passed, resume from the address
+		 * pointed by PC. Do not update PC
+		 */
+		kgdb_arch_update_addr(linux_regs, remcom_in_buffer);
+		atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id());
+		kgdb_single_step =  1;
+
+		/*
+		 * Enable single step handling
+		 */
+		if (!kernel_active_single_step())
+			kernel_enable_single_step(linux_regs);
+		else
+			kernel_rewind_single_step(linux_regs);
+		err = 0;
+		break;
+	default:
+		err = -1;
+	}
+	return err;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned long esr)
+{
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+	return DBG_HOOK_HANDLED;
+}
+NOKPROBE_SYMBOL(kgdb_brk_fn)
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned long esr)
+{
+	compiled_break = 1;
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return DBG_HOOK_HANDLED;
+}
+NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);
+
+static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned long esr)
+{
+	if (!kgdb_single_step)
+		return DBG_HOOK_ERROR;
+
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
+	return DBG_HOOK_HANDLED;
+}
+NOKPROBE_SYMBOL(kgdb_step_brk_fn);
+
+static struct break_hook kgdb_brkpt_hook = {
+	.fn		= kgdb_brk_fn,
+	.imm		= KGDB_DYN_DBG_BRK_IMM,
+};
+
+static struct break_hook kgdb_compiled_brkpt_hook = {
+	.fn		= kgdb_compiled_brk_fn,
+	.imm		= KGDB_COMPILED_DBG_BRK_IMM,
+};
+
+static struct step_hook kgdb_step_hook = {
+	.fn		= kgdb_step_brk_fn
+};
+
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+	struct pt_regs *regs = args->regs;
+
+	if (kgdb_handle_exception(1, args->signr, cmd, regs))
+		return NOTIFY_DONE;
+	return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __kgdb_notify(ptr, cmd);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call	= kgdb_notify,
+	/*
+	 * Want to be lowest priority
+	 */
+	.priority	= -INT_MAX,
+};
+
+/*
+ * kgdb_arch_init - Perform any architecture specific initialization.
+ * This function will handle the initialization of any architecture
+ * specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	int ret = register_die_notifier(&kgdb_notifier);
+
+	if (ret != 0)
+		return ret;
+
+	register_kernel_break_hook(&kgdb_brkpt_hook);
+	register_kernel_break_hook(&kgdb_compiled_brkpt_hook);
+	register_kernel_step_hook(&kgdb_step_hook);
+	return 0;
+}
+
+/*
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_kernel_break_hook(&kgdb_brkpt_hook);
+	unregister_kernel_break_hook(&kgdb_compiled_brkpt_hook);
+	unregister_kernel_step_hook(&kgdb_step_hook);
+	unregister_die_notifier(&kgdb_notifier);
+}
+
+const struct kgdb_arch arch_kgdb_ops;
+
+int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
+{
+	int err;
+
+	BUILD_BUG_ON(AARCH64_INSN_SIZE != BREAK_INSTR_SIZE);
+
+	err = aarch64_insn_read((void *)bpt->bpt_addr, (u32 *)bpt->saved_instr);
+	if (err)
+		return err;
+
+	return aarch64_insn_write((void *)bpt->bpt_addr,
+			(u32)AARCH64_BREAK_KGDB_DYN_DBG);
+}
+
+int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
+{
+	return aarch64_insn_write((void *)bpt->bpt_addr,
+			*(u32 *)bpt->saved_instr);
+}
diff --git a/arch/arm64/kernel/kuser32.S b/arch/arm64/kernel/kuser32.S
new file mode 100644
index 000000000..af046ceac
--- /dev/null
+++ b/arch/arm64/kernel/kuser32.S
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AArch32 user helpers.
+ * Based on the kuser helpers in arch/arm/kernel/entry-armv.S.
+ *
+ * Copyright (C) 2005-2011 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright (C) 2012-2018 ARM Ltd.
+ *
+ * The kuser helpers below are mapped at a fixed address by
+ * aarch32_setup_additional_pages() and are provided for compatibility
+ * reasons with 32 bit (aarch32) applications that need them.
+ *
+ * See Documentation/arch/arm/kernel_user_helpers.rst for formal definitions.
+ */
+
+#include <asm/unistd.h>
+
+	.section .rodata
+	.align	5
+	.globl	__kuser_helper_start
+__kuser_helper_start:
+
+__kuser_cmpxchg64:			// 0xffff0f60
+	.inst	0xe92d00f0		//	push		{r4, r5, r6, r7}
+	.inst	0xe1c040d0		//	ldrd		r4, r5, [r0]
+	.inst	0xe1c160d0		//	ldrd		r6, r7, [r1]
+	.inst	0xe1b20f9f		// 1:	ldrexd		r0, r1, [r2]
+	.inst	0xe0303004		//	eors		r3, r0, r4
+	.inst	0x00313005		//	eoreqs		r3, r1, r5
+	.inst	0x01a23e96		//	stlexdeq	r3, r6, [r2]
+	.inst	0x03330001		//	teqeq		r3, #1
+	.inst	0x0afffff9		//	beq		1b
+	.inst	0xf57ff05b		//	dmb		ish
+	.inst	0xe2730000		//	rsbs		r0, r3, #0
+	.inst	0xe8bd00f0		//	pop		{r4, r5, r6, r7}
+	.inst	0xe12fff1e		//	bx		lr
+
+	.align	5
+__kuser_memory_barrier:			// 0xffff0fa0
+	.inst	0xf57ff05b		//	dmb		ish
+	.inst	0xe12fff1e		//	bx		lr
+
+	.align	5
+__kuser_cmpxchg:			// 0xffff0fc0
+	.inst	0xe1923f9f		// 1:	ldrex		r3, [r2]
+	.inst	0xe0533000		//	subs		r3, r3, r0
+	.inst	0x01823e91		//	stlexeq		r3, r1, [r2]
+	.inst	0x03330001		//	teqeq		r3, #1
+	.inst	0x0afffffa		//	beq		1b
+	.inst	0xf57ff05b		//	dmb		ish
+	.inst	0xe2730000		//	rsbs		r0, r3, #0
+	.inst	0xe12fff1e		//	bx		lr
+
+	.align	5
+__kuser_get_tls:			// 0xffff0fe0
+	.inst	0xee1d0f70		//	mrc		p15, 0, r0, c13, c0, 3
+	.inst	0xe12fff1e		//	bx		lr
+	.rep	5
+	.word	0
+	.endr
+
+__kuser_helper_version:			// 0xffff0ffc
+	.word	((__kuser_helper_end - __kuser_helper_start) >> 5)
+	.globl	__kuser_helper_end
+__kuser_helper_end:
diff --git a/arch/arm64/kernel/machine_kexec.c b/arch/arm64/kernel/machine_kexec.c
new file mode 100644
index 000000000..078910db7
--- /dev/null
+++ b/arch/arm64/kernel/machine_kexec.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/page-flags.h>
+#include <linux/reboot.h>
+#include <linux/set_memory.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/daifflags.h>
+#include <asm/memory.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/trans_pgd.h>
+
+/**
+ * kexec_image_info - For debugging output.
+ */
+#define kexec_image_info(_i) _kexec_image_info(__func__, __LINE__, _i)
+static void _kexec_image_info(const char *func, int line,
+	const struct kimage *kimage)
+{
+	unsigned long i;
+
+	pr_debug("%s:%d:\n", func, line);
+	pr_debug("  kexec kimage info:\n");
+	pr_debug("    type:        %d\n", kimage->type);
+	pr_debug("    start:       %lx\n", kimage->start);
+	pr_debug("    head:        %lx\n", kimage->head);
+	pr_debug("    nr_segments: %lu\n", kimage->nr_segments);
+	pr_debug("    dtb_mem: %pa\n", &kimage->arch.dtb_mem);
+	pr_debug("    kern_reloc: %pa\n", &kimage->arch.kern_reloc);
+	pr_debug("    el2_vectors: %pa\n", &kimage->arch.el2_vectors);
+
+	for (i = 0; i < kimage->nr_segments; i++) {
+		pr_debug("      segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
+			i,
+			kimage->segment[i].mem,
+			kimage->segment[i].mem + kimage->segment[i].memsz,
+			kimage->segment[i].memsz,
+			kimage->segment[i].memsz /  PAGE_SIZE);
+	}
+}
+
+void machine_kexec_cleanup(struct kimage *kimage)
+{
+	/* Empty routine needed to avoid build errors. */
+}
+
+/**
+ * machine_kexec_prepare - Prepare for a kexec reboot.
+ *
+ * Called from the core kexec code when a kernel image is loaded.
+ * Forbid loading a kexec kernel if we have no way of hotplugging cpus or cpus
+ * are stuck in the kernel. This avoids a panic once we hit machine_kexec().
+ */
+int machine_kexec_prepare(struct kimage *kimage)
+{
+	if (kimage->type != KEXEC_TYPE_CRASH && cpus_are_stuck_in_kernel()) {
+		pr_err("Can't kexec: CPUs are stuck in the kernel.\n");
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+/**
+ * kexec_segment_flush - Helper to flush the kimage segments to PoC.
+ */
+static void kexec_segment_flush(const struct kimage *kimage)
+{
+	unsigned long i;
+
+	pr_debug("%s:\n", __func__);
+
+	for (i = 0; i < kimage->nr_segments; i++) {
+		pr_debug("  segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n",
+			i,
+			kimage->segment[i].mem,
+			kimage->segment[i].mem + kimage->segment[i].memsz,
+			kimage->segment[i].memsz,
+			kimage->segment[i].memsz /  PAGE_SIZE);
+
+		dcache_clean_inval_poc(
+			(unsigned long)phys_to_virt(kimage->segment[i].mem),
+			(unsigned long)phys_to_virt(kimage->segment[i].mem) +
+				kimage->segment[i].memsz);
+	}
+}
+
+/* Allocates pages for kexec page table */
+static void *kexec_page_alloc(void *arg)
+{
+	struct kimage *kimage = arg;
+	struct page *page = kimage_alloc_control_pages(kimage, 0);
+	void *vaddr = NULL;
+
+	if (!page)
+		return NULL;
+
+	vaddr = page_address(page);
+	memset(vaddr, 0, PAGE_SIZE);
+
+	return vaddr;
+}
+
+int machine_kexec_post_load(struct kimage *kimage)
+{
+	int rc;
+	pgd_t *trans_pgd;
+	void *reloc_code = page_to_virt(kimage->control_code_page);
+	long reloc_size;
+	struct trans_pgd_info info = {
+		.trans_alloc_page	= kexec_page_alloc,
+		.trans_alloc_arg	= kimage,
+	};
+
+	/* If in place, relocation is not used, only flush next kernel */
+	if (kimage->head & IND_DONE) {
+		kexec_segment_flush(kimage);
+		kexec_image_info(kimage);
+		return 0;
+	}
+
+	kimage->arch.el2_vectors = 0;
+	if (is_hyp_nvhe()) {
+		rc = trans_pgd_copy_el2_vectors(&info,
+						&kimage->arch.el2_vectors);
+		if (rc)
+			return rc;
+	}
+
+	/* Create a copy of the linear map */
+	trans_pgd = kexec_page_alloc(kimage);
+	if (!trans_pgd)
+		return -ENOMEM;
+	rc = trans_pgd_create_copy(&info, &trans_pgd, PAGE_OFFSET, PAGE_END);
+	if (rc)
+		return rc;
+	kimage->arch.ttbr1 = __pa(trans_pgd);
+	kimage->arch.zero_page = __pa_symbol(empty_zero_page);
+
+	reloc_size = __relocate_new_kernel_end - __relocate_new_kernel_start;
+	memcpy(reloc_code, __relocate_new_kernel_start, reloc_size);
+	kimage->arch.kern_reloc = __pa(reloc_code);
+	rc = trans_pgd_idmap_page(&info, &kimage->arch.ttbr0,
+				  &kimage->arch.t0sz, reloc_code);
+	if (rc)
+		return rc;
+	kimage->arch.phys_offset = virt_to_phys(kimage) - (long)kimage;
+
+	/* Flush the reloc_code in preparation for its execution. */
+	dcache_clean_inval_poc((unsigned long)reloc_code,
+			       (unsigned long)reloc_code + reloc_size);
+	icache_inval_pou((uintptr_t)reloc_code,
+			 (uintptr_t)reloc_code + reloc_size);
+	kexec_image_info(kimage);
+
+	return 0;
+}
+
+/**
+ * machine_kexec - Do the kexec reboot.
+ *
+ * Called from the core kexec code for a sys_reboot with LINUX_REBOOT_CMD_KEXEC.
+ */
+void machine_kexec(struct kimage *kimage)
+{
+	bool in_kexec_crash = (kimage == kexec_crash_image);
+	bool stuck_cpus = cpus_are_stuck_in_kernel();
+
+	/*
+	 * New cpus may have become stuck_in_kernel after we loaded the image.
+	 */
+	BUG_ON(!in_kexec_crash && (stuck_cpus || (num_online_cpus() > 1)));
+	WARN(in_kexec_crash && (stuck_cpus || smp_crash_stop_failed()),
+		"Some CPUs may be stale, kdump will be unreliable.\n");
+
+	pr_info("Bye!\n");
+
+	local_daif_mask();
+
+	/*
+	 * Both restart and kernel_reloc will shutdown the MMU, disable data
+	 * caches. However, restart will start new kernel or purgatory directly,
+	 * kernel_reloc contains the body of arm64_relocate_new_kernel
+	 * In kexec case, kimage->start points to purgatory assuming that
+	 * kernel entry and dtb address are embedded in purgatory by
+	 * userspace (kexec-tools).
+	 * In kexec_file case, the kernel starts directly without purgatory.
+	 */
+	if (kimage->head & IND_DONE) {
+		typeof(cpu_soft_restart) *restart;
+
+		cpu_install_idmap();
+		restart = (void *)__pa_symbol(cpu_soft_restart);
+		restart(is_hyp_nvhe(), kimage->start, kimage->arch.dtb_mem,
+			0, 0);
+	} else {
+		void (*kernel_reloc)(struct kimage *kimage);
+
+		if (is_hyp_nvhe())
+			__hyp_set_vectors(kimage->arch.el2_vectors);
+		cpu_install_ttbr0(kimage->arch.ttbr0, kimage->arch.t0sz);
+		kernel_reloc = (void *)kimage->arch.kern_reloc;
+		kernel_reloc(kimage);
+	}
+
+	BUG(); /* Should never get here. */
+}
+
+static void machine_kexec_mask_interrupts(void)
+{
+	unsigned int i;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(i, desc) {
+		struct irq_chip *chip;
+		int ret;
+
+		chip = irq_desc_get_chip(desc);
+		if (!chip)
+			continue;
+
+		/*
+		 * First try to remove the active state. If this
+		 * fails, try to EOI the interrupt.
+		 */
+		ret = irq_set_irqchip_state(i, IRQCHIP_STATE_ACTIVE, false);
+
+		if (ret && irqd_irq_inprogress(&desc->irq_data) &&
+		    chip->irq_eoi)
+			chip->irq_eoi(&desc->irq_data);
+
+		if (chip->irq_mask)
+			chip->irq_mask(&desc->irq_data);
+
+		if (chip->irq_disable && !irqd_irq_disabled(&desc->irq_data))
+			chip->irq_disable(&desc->irq_data);
+	}
+}
+
+/**
+ * machine_crash_shutdown - shutdown non-crashing cpus and save registers
+ */
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+	local_irq_disable();
+
+	/* shutdown non-crashing cpus */
+	crash_smp_send_stop();
+
+	/* for crashing cpu */
+	crash_save_cpu(regs, smp_processor_id());
+	machine_kexec_mask_interrupts();
+
+	pr_info("Starting crashdump kernel...\n");
+}
+
+#ifdef CONFIG_HIBERNATION
+/*
+ * To preserve the crash dump kernel image, the relevant memory segments
+ * should be mapped again around the hibernation.
+ */
+void crash_prepare_suspend(void)
+{
+	if (kexec_crash_image)
+		arch_kexec_unprotect_crashkres();
+}
+
+void crash_post_resume(void)
+{
+	if (kexec_crash_image)
+		arch_kexec_protect_crashkres();
+}
+
+/*
+ * crash_is_nosave
+ *
+ * Return true only if a page is part of reserved memory for crash dump kernel,
+ * but does not hold any data of loaded kernel image.
+ *
+ * Note that all the pages in crash dump kernel memory have been initially
+ * marked as Reserved as memory was allocated via memblock_reserve().
+ *
+ * In hibernation, the pages which are Reserved and yet "nosave" are excluded
+ * from the hibernation iamge. crash_is_nosave() does thich check for crash
+ * dump kernel and will reduce the total size of hibernation image.
+ */
+
+bool crash_is_nosave(unsigned long pfn)
+{
+	int i;
+	phys_addr_t addr;
+
+	if (!crashk_res.end)
+		return false;
+
+	/* in reserved memory? */
+	addr = __pfn_to_phys(pfn);
+	if ((addr < crashk_res.start) || (crashk_res.end < addr)) {
+		if (!crashk_low_res.end)
+			return false;
+
+		if ((addr < crashk_low_res.start) || (crashk_low_res.end < addr))
+			return false;
+	}
+
+	if (!kexec_crash_image)
+		return true;
+
+	/* not part of loaded kernel image? */
+	for (i = 0; i < kexec_crash_image->nr_segments; i++)
+		if (addr >= kexec_crash_image->segment[i].mem &&
+				addr < (kexec_crash_image->segment[i].mem +
+					kexec_crash_image->segment[i].memsz))
+			return false;
+
+	return true;
+}
+
+void crash_free_reserved_phys_range(unsigned long begin, unsigned long end)
+{
+	unsigned long addr;
+	struct page *page;
+
+	for (addr = begin; addr < end; addr += PAGE_SIZE) {
+		page = phys_to_page(addr);
+		free_reserved_page(page);
+	}
+}
+#endif /* CONFIG_HIBERNATION */
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
new file mode 100644
index 000000000..a11a6e14b
--- /dev/null
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kexec_file for arm64
+ *
+ * Copyright (C) 2018 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * Most code is derived from arm64 port of kexec-tools
+ */
+
+#define pr_fmt(fmt) "kexec_file: " fmt
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/kexec.h>
+#include <linux/libfdt.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/vmalloc.h>
+
+const struct kexec_file_ops * const kexec_file_loaders[] = {
+	&kexec_image_ops,
+	NULL
+};
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image)
+{
+	kvfree(image->arch.dtb);
+	image->arch.dtb = NULL;
+
+	vfree(image->elf_headers);
+	image->elf_headers = NULL;
+	image->elf_headers_sz = 0;
+
+	return kexec_image_post_load_cleanup_default(image);
+}
+
+static int prepare_elf_headers(void **addr, unsigned long *sz)
+{
+	struct crash_mem *cmem;
+	unsigned int nr_ranges;
+	int ret;
+	u64 i;
+	phys_addr_t start, end;
+
+	nr_ranges = 2; /* for exclusion of crashkernel region */
+	for_each_mem_range(i, &start, &end)
+		nr_ranges++;
+
+	cmem = kmalloc(struct_size(cmem, ranges, nr_ranges), GFP_KERNEL);
+	if (!cmem)
+		return -ENOMEM;
+
+	cmem->max_nr_ranges = nr_ranges;
+	cmem->nr_ranges = 0;
+	for_each_mem_range(i, &start, &end) {
+		cmem->ranges[cmem->nr_ranges].start = start;
+		cmem->ranges[cmem->nr_ranges].end = end - 1;
+		cmem->nr_ranges++;
+	}
+
+	/* Exclude crashkernel region */
+	ret = crash_exclude_mem_range(cmem, crashk_res.start, crashk_res.end);
+	if (ret)
+		goto out;
+
+	if (crashk_low_res.end) {
+		ret = crash_exclude_mem_range(cmem, crashk_low_res.start, crashk_low_res.end);
+		if (ret)
+			goto out;
+	}
+
+	ret = crash_prepare_elf64_headers(cmem, true, addr, sz);
+
+out:
+	kfree(cmem);
+	return ret;
+}
+
+/*
+ * Tries to add the initrd and DTB to the image. If it is not possible to find
+ * valid locations, this function will undo changes to the image and return non
+ * zero.
+ */
+int load_other_segments(struct kimage *image,
+			unsigned long kernel_load_addr,
+			unsigned long kernel_size,
+			char *initrd, unsigned long initrd_len,
+			char *cmdline)
+{
+	struct kexec_buf kbuf;
+	void *headers, *dtb = NULL;
+	unsigned long headers_sz, initrd_load_addr = 0, dtb_len,
+		      orig_segments = image->nr_segments;
+	int ret = 0;
+
+	kbuf.image = image;
+	/* not allocate anything below the kernel */
+	kbuf.buf_min = kernel_load_addr + kernel_size;
+
+	/* load elf core header */
+	if (image->type == KEXEC_TYPE_CRASH) {
+		ret = prepare_elf_headers(&headers, &headers_sz);
+		if (ret) {
+			pr_err("Preparing elf core header failed\n");
+			goto out_err;
+		}
+
+		kbuf.buffer = headers;
+		kbuf.bufsz = headers_sz;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+		kbuf.memsz = headers_sz;
+		kbuf.buf_align = SZ_64K; /* largest supported page size */
+		kbuf.buf_max = ULONG_MAX;
+		kbuf.top_down = true;
+
+		ret = kexec_add_buffer(&kbuf);
+		if (ret) {
+			vfree(headers);
+			goto out_err;
+		}
+		image->elf_headers = headers;
+		image->elf_load_addr = kbuf.mem;
+		image->elf_headers_sz = headers_sz;
+
+		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
+	}
+
+	/* load initrd */
+	if (initrd) {
+		kbuf.buffer = initrd;
+		kbuf.bufsz = initrd_len;
+		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+		kbuf.memsz = initrd_len;
+		kbuf.buf_align = 0;
+		/* within 1GB-aligned window of up to 32GB in size */
+		kbuf.buf_max = round_down(kernel_load_addr, SZ_1G)
+						+ (unsigned long)SZ_1G * 32;
+		kbuf.top_down = false;
+
+		ret = kexec_add_buffer(&kbuf);
+		if (ret)
+			goto out_err;
+		initrd_load_addr = kbuf.mem;
+
+		pr_debug("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+				initrd_load_addr, kbuf.bufsz, kbuf.memsz);
+	}
+
+	/* load dtb */
+	dtb = of_kexec_alloc_and_setup_fdt(image, initrd_load_addr,
+					   initrd_len, cmdline, 0);
+	if (!dtb) {
+		pr_err("Preparing for new dtb failed\n");
+		ret = -EINVAL;
+		goto out_err;
+	}
+
+	/* trim it */
+	fdt_pack(dtb);
+	dtb_len = fdt_totalsize(dtb);
+	kbuf.buffer = dtb;
+	kbuf.bufsz = dtb_len;
+	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+	kbuf.memsz = dtb_len;
+	/* not across 2MB boundary */
+	kbuf.buf_align = SZ_2M;
+	kbuf.buf_max = ULONG_MAX;
+	kbuf.top_down = true;
+
+	ret = kexec_add_buffer(&kbuf);
+	if (ret)
+		goto out_err;
+	image->arch.dtb = dtb;
+	image->arch.dtb_mem = kbuf.mem;
+
+	pr_debug("Loaded dtb at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
+			kbuf.mem, kbuf.bufsz, kbuf.memsz);
+
+	return 0;
+
+out_err:
+	image->nr_segments = orig_segments;
+	kvfree(dtb);
+	return ret;
+}
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
new file mode 100644
index 000000000..79200f21e
--- /dev/null
+++ b/arch/arm64/kernel/module-plts.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/elf.h>
+#include <linux/ftrace.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/sort.h>
+
+static struct plt_entry __get_adrp_add_pair(u64 dst, u64 pc,
+					    enum aarch64_insn_register reg)
+{
+	u32 adrp, add;
+
+	adrp = aarch64_insn_gen_adr(pc, dst, reg, AARCH64_INSN_ADR_TYPE_ADRP);
+	add = aarch64_insn_gen_add_sub_imm(reg, reg, dst % SZ_4K,
+					   AARCH64_INSN_VARIANT_64BIT,
+					   AARCH64_INSN_ADSB_ADD);
+
+	return (struct plt_entry){ cpu_to_le32(adrp), cpu_to_le32(add) };
+}
+
+struct plt_entry get_plt_entry(u64 dst, void *pc)
+{
+	struct plt_entry plt;
+	static u32 br;
+
+	if (!br)
+		br = aarch64_insn_gen_branch_reg(AARCH64_INSN_REG_16,
+						 AARCH64_INSN_BRANCH_NOLINK);
+
+	plt = __get_adrp_add_pair(dst, (u64)pc, AARCH64_INSN_REG_16);
+	plt.br = cpu_to_le32(br);
+
+	return plt;
+}
+
+static bool plt_entries_equal(const struct plt_entry *a,
+			      const struct plt_entry *b)
+{
+	u64 p, q;
+
+	/*
+	 * Check whether both entries refer to the same target:
+	 * do the cheapest checks first.
+	 * If the 'add' or 'br' opcodes are different, then the target
+	 * cannot be the same.
+	 */
+	if (a->add != b->add || a->br != b->br)
+		return false;
+
+	p = ALIGN_DOWN((u64)a, SZ_4K);
+	q = ALIGN_DOWN((u64)b, SZ_4K);
+
+	/*
+	 * If the 'adrp' opcodes are the same then we just need to check
+	 * that they refer to the same 4k region.
+	 */
+	if (a->adrp == b->adrp && p == q)
+		return true;
+
+	return (p + aarch64_insn_adrp_get_offset(le32_to_cpu(a->adrp))) ==
+	       (q + aarch64_insn_adrp_get_offset(le32_to_cpu(b->adrp)));
+}
+
+u64 module_emit_plt_entry(struct module *mod, Elf64_Shdr *sechdrs,
+			  void *loc, const Elf64_Rela *rela,
+			  Elf64_Sym *sym)
+{
+	struct mod_plt_sec *pltsec = !within_module_init((unsigned long)loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
+	struct plt_entry *plt = (struct plt_entry *)sechdrs[pltsec->plt_shndx].sh_addr;
+	int i = pltsec->plt_num_entries;
+	int j = i - 1;
+	u64 val = sym->st_value + rela->r_addend;
+
+	if (is_forbidden_offset_for_adrp(&plt[i].adrp))
+		i++;
+
+	plt[i] = get_plt_entry(val, &plt[i]);
+
+	/*
+	 * Check if the entry we just created is a duplicate. Given that the
+	 * relocations are sorted, this will be the last entry we allocated.
+	 * (if one exists).
+	 */
+	if (j >= 0 && plt_entries_equal(plt + i, plt + j))
+		return (u64)&plt[j];
+
+	pltsec->plt_num_entries += i - j;
+	if (WARN_ON(pltsec->plt_num_entries > pltsec->plt_max_entries))
+		return 0;
+
+	return (u64)&plt[i];
+}
+
+#ifdef CONFIG_ARM64_ERRATUM_843419
+u64 module_emit_veneer_for_adrp(struct module *mod, Elf64_Shdr *sechdrs,
+				void *loc, u64 val)
+{
+	struct mod_plt_sec *pltsec = !within_module_init((unsigned long)loc, mod) ?
+						&mod->arch.core : &mod->arch.init;
+	struct plt_entry *plt = (struct plt_entry *)sechdrs[pltsec->plt_shndx].sh_addr;
+	int i = pltsec->plt_num_entries++;
+	u32 br;
+	int rd;
+
+	if (WARN_ON(pltsec->plt_num_entries > pltsec->plt_max_entries))
+		return 0;
+
+	if (is_forbidden_offset_for_adrp(&plt[i].adrp))
+		i = pltsec->plt_num_entries++;
+
+	/* get the destination register of the ADRP instruction */
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD,
+					  le32_to_cpup((__le32 *)loc));
+
+	br = aarch64_insn_gen_branch_imm((u64)&plt[i].br, (u64)loc + 4,
+					 AARCH64_INSN_BRANCH_NOLINK);
+
+	plt[i] = __get_adrp_add_pair(val, (u64)&plt[i], rd);
+	plt[i].br = cpu_to_le32(br);
+
+	return (u64)&plt[i];
+}
+#endif
+
+#define cmp_3way(a, b)	((a) < (b) ? -1 : (a) > (b))
+
+static int cmp_rela(const void *a, const void *b)
+{
+	const Elf64_Rela *x = a, *y = b;
+	int i;
+
+	/* sort by type, symbol index and addend */
+	i = cmp_3way(ELF64_R_TYPE(x->r_info), ELF64_R_TYPE(y->r_info));
+	if (i == 0)
+		i = cmp_3way(ELF64_R_SYM(x->r_info), ELF64_R_SYM(y->r_info));
+	if (i == 0)
+		i = cmp_3way(x->r_addend, y->r_addend);
+	return i;
+}
+
+static bool duplicate_rel(const Elf64_Rela *rela, int num)
+{
+	/*
+	 * Entries are sorted by type, symbol index and addend. That means
+	 * that, if a duplicate entry exists, it must be in the preceding
+	 * slot.
+	 */
+	return num > 0 && cmp_rela(rela + num, rela + num - 1) == 0;
+}
+
+static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num,
+			       Elf64_Word dstidx, Elf_Shdr *dstsec)
+{
+	unsigned int ret = 0;
+	Elf64_Sym *s;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		u64 min_align;
+
+		switch (ELF64_R_TYPE(rela[i].r_info)) {
+		case R_AARCH64_JUMP26:
+		case R_AARCH64_CALL26:
+			/*
+			 * We only have to consider branch targets that resolve
+			 * to symbols that are defined in a different section.
+			 * This is not simply a heuristic, it is a fundamental
+			 * limitation, since there is no guaranteed way to emit
+			 * PLT entries sufficiently close to the branch if the
+			 * section size exceeds the range of a branch
+			 * instruction. So ignore relocations against defined
+			 * symbols if they live in the same section as the
+			 * relocation target.
+			 */
+			s = syms + ELF64_R_SYM(rela[i].r_info);
+			if (s->st_shndx == dstidx)
+				break;
+
+			/*
+			 * Jump relocations with non-zero addends against
+			 * undefined symbols are supported by the ELF spec, but
+			 * do not occur in practice (e.g., 'jump n bytes past
+			 * the entry point of undefined function symbol f').
+			 * So we need to support them, but there is no need to
+			 * take them into consideration when trying to optimize
+			 * this code. So let's only check for duplicates when
+			 * the addend is zero: this allows us to record the PLT
+			 * entry address in the symbol table itself, rather than
+			 * having to search the list for duplicates each time we
+			 * emit one.
+			 */
+			if (rela[i].r_addend != 0 || !duplicate_rel(rela, i))
+				ret++;
+			break;
+		case R_AARCH64_ADR_PREL_PG_HI21_NC:
+		case R_AARCH64_ADR_PREL_PG_HI21:
+			if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) ||
+			    !cpus_have_const_cap(ARM64_WORKAROUND_843419))
+				break;
+
+			/*
+			 * Determine the minimal safe alignment for this ADRP
+			 * instruction: the section alignment at which it is
+			 * guaranteed not to appear at a vulnerable offset.
+			 *
+			 * This comes down to finding the least significant zero
+			 * bit in bits [11:3] of the section offset, and
+			 * increasing the section's alignment so that the
+			 * resulting address of this instruction is guaranteed
+			 * to equal the offset in that particular bit (as well
+			 * as all less significant bits). This ensures that the
+			 * address modulo 4 KB != 0xfff8 or 0xfffc (which would
+			 * have all ones in bits [11:3])
+			 */
+			min_align = 2ULL << ffz(rela[i].r_offset | 0x7);
+
+			/*
+			 * Allocate veneer space for each ADRP that may appear
+			 * at a vulnerable offset nonetheless. At relocation
+			 * time, some of these will remain unused since some
+			 * ADRP instructions can be patched to ADR instructions
+			 * instead.
+			 */
+			if (min_align > SZ_4K)
+				ret++;
+			else
+				dstsec->sh_addralign = max(dstsec->sh_addralign,
+							   min_align);
+			break;
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_843419) &&
+	    cpus_have_const_cap(ARM64_WORKAROUND_843419))
+		/*
+		 * Add some slack so we can skip PLT slots that may trigger
+		 * the erratum due to the placement of the ADRP instruction.
+		 */
+		ret += DIV_ROUND_UP(ret, (SZ_4K / sizeof(struct plt_entry)));
+
+	return ret;
+}
+
+static bool branch_rela_needs_plt(Elf64_Sym *syms, Elf64_Rela *rela,
+				  Elf64_Word dstidx)
+{
+
+	Elf64_Sym *s = syms + ELF64_R_SYM(rela->r_info);
+
+	if (s->st_shndx == dstidx)
+		return false;
+
+	return ELF64_R_TYPE(rela->r_info) == R_AARCH64_JUMP26 ||
+	       ELF64_R_TYPE(rela->r_info) == R_AARCH64_CALL26;
+}
+
+/* Group branch PLT relas at the front end of the array. */
+static int partition_branch_plt_relas(Elf64_Sym *syms, Elf64_Rela *rela,
+				      int numrels, Elf64_Word dstidx)
+{
+	int i = 0, j = numrels - 1;
+
+	while (i < j) {
+		if (branch_rela_needs_plt(syms, &rela[i], dstidx))
+			i++;
+		else if (branch_rela_needs_plt(syms, &rela[j], dstidx))
+			swap(rela[i], rela[j]);
+		else
+			j--;
+	}
+
+	return i;
+}
+
+int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
+			      char *secstrings, struct module *mod)
+{
+	unsigned long core_plts = 0;
+	unsigned long init_plts = 0;
+	Elf64_Sym *syms = NULL;
+	Elf_Shdr *pltsec, *tramp = NULL;
+	int i;
+
+	/*
+	 * Find the empty .plt section so we can expand it to store the PLT
+	 * entries. Record the symtab address as well.
+	 */
+	for (i = 0; i < ehdr->e_shnum; i++) {
+		if (!strcmp(secstrings + sechdrs[i].sh_name, ".plt"))
+			mod->arch.core.plt_shndx = i;
+		else if (!strcmp(secstrings + sechdrs[i].sh_name, ".init.plt"))
+			mod->arch.init.plt_shndx = i;
+		else if (!strcmp(secstrings + sechdrs[i].sh_name,
+				 ".text.ftrace_trampoline"))
+			tramp = sechdrs + i;
+		else if (sechdrs[i].sh_type == SHT_SYMTAB)
+			syms = (Elf64_Sym *)sechdrs[i].sh_addr;
+	}
+
+	if (!mod->arch.core.plt_shndx || !mod->arch.init.plt_shndx) {
+		pr_err("%s: module PLT section(s) missing\n", mod->name);
+		return -ENOEXEC;
+	}
+	if (!syms) {
+		pr_err("%s: module symtab section missing\n", mod->name);
+		return -ENOEXEC;
+	}
+
+	for (i = 0; i < ehdr->e_shnum; i++) {
+		Elf64_Rela *rels = (void *)ehdr + sechdrs[i].sh_offset;
+		int nents, numrels = sechdrs[i].sh_size / sizeof(Elf64_Rela);
+		Elf64_Shdr *dstsec = sechdrs + sechdrs[i].sh_info;
+
+		if (sechdrs[i].sh_type != SHT_RELA)
+			continue;
+
+		/* ignore relocations that operate on non-exec sections */
+		if (!(dstsec->sh_flags & SHF_EXECINSTR))
+			continue;
+
+		/*
+		 * sort branch relocations requiring a PLT by type, symbol index
+		 * and addend
+		 */
+		nents = partition_branch_plt_relas(syms, rels, numrels,
+						   sechdrs[i].sh_info);
+		if (nents)
+			sort(rels, nents, sizeof(Elf64_Rela), cmp_rela, NULL);
+
+		if (!module_init_layout_section(secstrings + dstsec->sh_name))
+			core_plts += count_plts(syms, rels, numrels,
+						sechdrs[i].sh_info, dstsec);
+		else
+			init_plts += count_plts(syms, rels, numrels,
+						sechdrs[i].sh_info, dstsec);
+	}
+
+	pltsec = sechdrs + mod->arch.core.plt_shndx;
+	pltsec->sh_type = SHT_NOBITS;
+	pltsec->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+	pltsec->sh_addralign = L1_CACHE_BYTES;
+	pltsec->sh_size = (core_plts  + 1) * sizeof(struct plt_entry);
+	mod->arch.core.plt_num_entries = 0;
+	mod->arch.core.plt_max_entries = core_plts;
+
+	pltsec = sechdrs + mod->arch.init.plt_shndx;
+	pltsec->sh_type = SHT_NOBITS;
+	pltsec->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+	pltsec->sh_addralign = L1_CACHE_BYTES;
+	pltsec->sh_size = (init_plts + 1) * sizeof(struct plt_entry);
+	mod->arch.init.plt_num_entries = 0;
+	mod->arch.init.plt_max_entries = init_plts;
+
+	if (tramp) {
+		tramp->sh_type = SHT_NOBITS;
+		tramp->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+		tramp->sh_addralign = __alignof__(struct plt_entry);
+		tramp->sh_size = NR_FTRACE_PLTS * sizeof(struct plt_entry);
+	}
+
+	return 0;
+}
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
new file mode 100644
index 000000000..dd8512975
--- /dev/null
+++ b/arch/arm64/kernel/module.c
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AArch64 loadable module support.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define pr_fmt(fmt) "Modules: " fmt
+
+#include <linux/bitops.h>
+#include <linux/elf.h>
+#include <linux/ftrace.h>
+#include <linux/gfp.h>
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/moduleloader.h>
+#include <linux/random.h>
+#include <linux/scs.h>
+#include <linux/vmalloc.h>
+
+#include <asm/alternative.h>
+#include <asm/insn.h>
+#include <asm/scs.h>
+#include <asm/sections.h>
+
+static u64 module_direct_base __ro_after_init = 0;
+static u64 module_plt_base __ro_after_init = 0;
+
+/*
+ * Choose a random page-aligned base address for a window of 'size' bytes which
+ * entirely contains the interval [start, end - 1].
+ */
+static u64 __init random_bounding_box(u64 size, u64 start, u64 end)
+{
+	u64 max_pgoff, pgoff;
+
+	if ((end - start) >= size)
+		return 0;
+
+	max_pgoff = (size - (end - start)) / PAGE_SIZE;
+	pgoff = get_random_u32_inclusive(0, max_pgoff);
+
+	return start - pgoff * PAGE_SIZE;
+}
+
+/*
+ * Modules may directly reference data and text anywhere within the kernel
+ * image and other modules. References using PREL32 relocations have a +/-2G
+ * range, and so we need to ensure that the entire kernel image and all modules
+ * fall within a 2G window such that these are always within range.
+ *
+ * Modules may directly branch to functions and code within the kernel text,
+ * and to functions and code within other modules. These branches will use
+ * CALL26/JUMP26 relocations with a +/-128M range. Without PLTs, we must ensure
+ * that the entire kernel text and all module text falls within a 128M window
+ * such that these are always within range. With PLTs, we can expand this to a
+ * 2G window.
+ *
+ * We chose the 128M region to surround the entire kernel image (rather than
+ * just the text) as using the same bounds for the 128M and 2G regions ensures
+ * by construction that we never select a 128M region that is not a subset of
+ * the 2G region. For very large and unusual kernel configurations this means
+ * we may fall back to PLTs where they could have been avoided, but this keeps
+ * the logic significantly simpler.
+ */
+static int __init module_init_limits(void)
+{
+	u64 kernel_end = (u64)_end;
+	u64 kernel_start = (u64)_text;
+	u64 kernel_size = kernel_end - kernel_start;
+
+	/*
+	 * The default modules region is placed immediately below the kernel
+	 * image, and is large enough to use the full 2G relocation range.
+	 */
+	BUILD_BUG_ON(KIMAGE_VADDR != MODULES_END);
+	BUILD_BUG_ON(MODULES_VSIZE < SZ_2G);
+
+	if (!kaslr_enabled()) {
+		if (kernel_size < SZ_128M)
+			module_direct_base = kernel_end - SZ_128M;
+		if (kernel_size < SZ_2G)
+			module_plt_base = kernel_end - SZ_2G;
+	} else {
+		u64 min = kernel_start;
+		u64 max = kernel_end;
+
+		if (IS_ENABLED(CONFIG_RANDOMIZE_MODULE_REGION_FULL)) {
+			pr_info("2G module region forced by RANDOMIZE_MODULE_REGION_FULL\n");
+		} else {
+			module_direct_base = random_bounding_box(SZ_128M, min, max);
+			if (module_direct_base) {
+				min = module_direct_base;
+				max = module_direct_base + SZ_128M;
+			}
+		}
+
+		module_plt_base = random_bounding_box(SZ_2G, min, max);
+	}
+
+	pr_info("%llu pages in range for non-PLT usage",
+		module_direct_base ? (SZ_128M - kernel_size) / PAGE_SIZE : 0);
+	pr_info("%llu pages in range for PLT usage",
+		module_plt_base ? (SZ_2G - kernel_size) / PAGE_SIZE : 0);
+
+	return 0;
+}
+subsys_initcall(module_init_limits);
+
+void *module_alloc(unsigned long size)
+{
+	void *p = NULL;
+
+	/*
+	 * Where possible, prefer to allocate within direct branch range of the
+	 * kernel such that no PLTs are necessary.
+	 */
+	if (module_direct_base) {
+		p = __vmalloc_node_range(size, MODULE_ALIGN,
+					 module_direct_base,
+					 module_direct_base + SZ_128M,
+					 GFP_KERNEL | __GFP_NOWARN,
+					 PAGE_KERNEL, 0, NUMA_NO_NODE,
+					 __builtin_return_address(0));
+	}
+
+	if (!p && module_plt_base) {
+		p = __vmalloc_node_range(size, MODULE_ALIGN,
+					 module_plt_base,
+					 module_plt_base + SZ_2G,
+					 GFP_KERNEL | __GFP_NOWARN,
+					 PAGE_KERNEL, 0, NUMA_NO_NODE,
+					 __builtin_return_address(0));
+	}
+
+	if (!p) {
+		pr_warn_ratelimited("%s: unable to allocate memory\n",
+				    __func__);
+	}
+
+	if (p && (kasan_alloc_module_shadow(p, size, GFP_KERNEL) < 0)) {
+		vfree(p);
+		return NULL;
+	}
+
+	/* Memory is intended to be executable, reset the pointer tag. */
+	return kasan_reset_tag(p);
+}
+
+enum aarch64_reloc_op {
+	RELOC_OP_NONE,
+	RELOC_OP_ABS,
+	RELOC_OP_PREL,
+	RELOC_OP_PAGE,
+};
+
+static u64 do_reloc(enum aarch64_reloc_op reloc_op, __le32 *place, u64 val)
+{
+	switch (reloc_op) {
+	case RELOC_OP_ABS:
+		return val;
+	case RELOC_OP_PREL:
+		return val - (u64)place;
+	case RELOC_OP_PAGE:
+		return (val & ~0xfff) - ((u64)place & ~0xfff);
+	case RELOC_OP_NONE:
+		return 0;
+	}
+
+	pr_err("do_reloc: unknown relocation operation %d\n", reloc_op);
+	return 0;
+}
+
+static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
+{
+	s64 sval = do_reloc(op, place, val);
+
+	/*
+	 * The ELF psABI for AArch64 documents the 16-bit and 32-bit place
+	 * relative and absolute relocations as having a range of [-2^15, 2^16)
+	 * or [-2^31, 2^32), respectively. However, in order to be able to
+	 * detect overflows reliably, we have to choose whether we interpret
+	 * such quantities as signed or as unsigned, and stick with it.
+	 * The way we organize our address space requires a signed
+	 * interpretation of 32-bit relative references, so let's use that
+	 * for all R_AARCH64_PRELxx relocations. This means our upper
+	 * bound for overflow detection should be Sxx_MAX rather than Uxx_MAX.
+	 */
+
+	switch (len) {
+	case 16:
+		*(s16 *)place = sval;
+		switch (op) {
+		case RELOC_OP_ABS:
+			if (sval < 0 || sval > U16_MAX)
+				return -ERANGE;
+			break;
+		case RELOC_OP_PREL:
+			if (sval < S16_MIN || sval > S16_MAX)
+				return -ERANGE;
+			break;
+		default:
+			pr_err("Invalid 16-bit data relocation (%d)\n", op);
+			return 0;
+		}
+		break;
+	case 32:
+		*(s32 *)place = sval;
+		switch (op) {
+		case RELOC_OP_ABS:
+			if (sval < 0 || sval > U32_MAX)
+				return -ERANGE;
+			break;
+		case RELOC_OP_PREL:
+			if (sval < S32_MIN || sval > S32_MAX)
+				return -ERANGE;
+			break;
+		default:
+			pr_err("Invalid 32-bit data relocation (%d)\n", op);
+			return 0;
+		}
+		break;
+	case 64:
+		*(s64 *)place = sval;
+		break;
+	default:
+		pr_err("Invalid length (%d) for data relocation\n", len);
+		return 0;
+	}
+	return 0;
+}
+
+enum aarch64_insn_movw_imm_type {
+	AARCH64_INSN_IMM_MOVNZ,
+	AARCH64_INSN_IMM_MOVKZ,
+};
+
+static int reloc_insn_movw(enum aarch64_reloc_op op, __le32 *place, u64 val,
+			   int lsb, enum aarch64_insn_movw_imm_type imm_type)
+{
+	u64 imm;
+	s64 sval;
+	u32 insn = le32_to_cpu(*place);
+
+	sval = do_reloc(op, place, val);
+	imm = sval >> lsb;
+
+	if (imm_type == AARCH64_INSN_IMM_MOVNZ) {
+		/*
+		 * For signed MOVW relocations, we have to manipulate the
+		 * instruction encoding depending on whether or not the
+		 * immediate is less than zero.
+		 */
+		insn &= ~(3 << 29);
+		if (sval >= 0) {
+			/* >=0: Set the instruction to MOVZ (opcode 10b). */
+			insn |= 2 << 29;
+		} else {
+			/*
+			 * <0: Set the instruction to MOVN (opcode 00b).
+			 *     Since we've masked the opcode already, we
+			 *     don't need to do anything other than
+			 *     inverting the new immediate field.
+			 */
+			imm = ~imm;
+		}
+	}
+
+	/* Update the instruction with the new encoding. */
+	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_16, insn, imm);
+	*place = cpu_to_le32(insn);
+
+	if (imm > U16_MAX)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int reloc_insn_imm(enum aarch64_reloc_op op, __le32 *place, u64 val,
+			  int lsb, int len, enum aarch64_insn_imm_type imm_type)
+{
+	u64 imm, imm_mask;
+	s64 sval;
+	u32 insn = le32_to_cpu(*place);
+
+	/* Calculate the relocation value. */
+	sval = do_reloc(op, place, val);
+	sval >>= lsb;
+
+	/* Extract the value bits and shift them to bit 0. */
+	imm_mask = (BIT(lsb + len) - 1) >> lsb;
+	imm = sval & imm_mask;
+
+	/* Update the instruction's immediate field. */
+	insn = aarch64_insn_encode_immediate(imm_type, insn, imm);
+	*place = cpu_to_le32(insn);
+
+	/*
+	 * Extract the upper value bits (including the sign bit) and
+	 * shift them to bit 0.
+	 */
+	sval = (s64)(sval & ~(imm_mask >> 1)) >> (len - 1);
+
+	/*
+	 * Overflow has occurred if the upper bits are not all equal to
+	 * the sign bit of the value.
+	 */
+	if ((u64)(sval + 1) >= 2)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int reloc_insn_adrp(struct module *mod, Elf64_Shdr *sechdrs,
+			   __le32 *place, u64 val)
+{
+	u32 insn;
+
+	if (!is_forbidden_offset_for_adrp(place))
+		return reloc_insn_imm(RELOC_OP_PAGE, place, val, 12, 21,
+				      AARCH64_INSN_IMM_ADR);
+
+	/* patch ADRP to ADR if it is in range */
+	if (!reloc_insn_imm(RELOC_OP_PREL, place, val & ~0xfff, 0, 21,
+			    AARCH64_INSN_IMM_ADR)) {
+		insn = le32_to_cpu(*place);
+		insn &= ~BIT(31);
+	} else {
+		/* out of range for ADR -> emit a veneer */
+		val = module_emit_veneer_for_adrp(mod, sechdrs, place, val & ~0xfff);
+		if (!val)
+			return -ENOEXEC;
+		insn = aarch64_insn_gen_branch_imm((u64)place, val,
+						   AARCH64_INSN_BRANCH_NOLINK);
+	}
+
+	*place = cpu_to_le32(insn);
+	return 0;
+}
+
+int apply_relocate_add(Elf64_Shdr *sechdrs,
+		       const char *strtab,
+		       unsigned int symindex,
+		       unsigned int relsec,
+		       struct module *me)
+{
+	unsigned int i;
+	int ovf;
+	bool overflow_check;
+	Elf64_Sym *sym;
+	void *loc;
+	u64 val;
+	Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+
+	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+		/* loc corresponds to P in the AArch64 ELF document. */
+		loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+			+ rel[i].r_offset;
+
+		/* sym is the ELF symbol we're referring to. */
+		sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
+			+ ELF64_R_SYM(rel[i].r_info);
+
+		/* val corresponds to (S + A) in the AArch64 ELF document. */
+		val = sym->st_value + rel[i].r_addend;
+
+		/* Check for overflow by default. */
+		overflow_check = true;
+
+		/* Perform the static relocation. */
+		switch (ELF64_R_TYPE(rel[i].r_info)) {
+		/* Null relocations. */
+		case R_ARM_NONE:
+		case R_AARCH64_NONE:
+			ovf = 0;
+			break;
+
+		/* Data relocations. */
+		case R_AARCH64_ABS64:
+			overflow_check = false;
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 64);
+			break;
+		case R_AARCH64_ABS32:
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 32);
+			break;
+		case R_AARCH64_ABS16:
+			ovf = reloc_data(RELOC_OP_ABS, loc, val, 16);
+			break;
+		case R_AARCH64_PREL64:
+			overflow_check = false;
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 64);
+			break;
+		case R_AARCH64_PREL32:
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 32);
+			break;
+		case R_AARCH64_PREL16:
+			ovf = reloc_data(RELOC_OP_PREL, loc, val, 16);
+			break;
+
+		/* MOVW instruction relocations. */
+		case R_AARCH64_MOVW_UABS_G0_NC:
+			overflow_check = false;
+			fallthrough;
+		case R_AARCH64_MOVW_UABS_G0:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_UABS_G1_NC:
+			overflow_check = false;
+			fallthrough;
+		case R_AARCH64_MOVW_UABS_G1:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_UABS_G2_NC:
+			overflow_check = false;
+			fallthrough;
+		case R_AARCH64_MOVW_UABS_G2:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_UABS_G3:
+			/* We're using the top bits so we can't overflow. */
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 48,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_SABS_G0:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_SABS_G1:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_SABS_G2:
+			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G0_NC:
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G0:
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G1_NC:
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G1:
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G2_NC:
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
+					      AARCH64_INSN_IMM_MOVKZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G2:
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+		case R_AARCH64_MOVW_PREL_G3:
+			/* We're using the top bits so we can't overflow. */
+			overflow_check = false;
+			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 48,
+					      AARCH64_INSN_IMM_MOVNZ);
+			break;
+
+		/* Immediate instruction relocations. */
+		case R_AARCH64_LD_PREL_LO19:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 19,
+					     AARCH64_INSN_IMM_19);
+			break;
+		case R_AARCH64_ADR_PREL_LO21:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 0, 21,
+					     AARCH64_INSN_IMM_ADR);
+			break;
+		case R_AARCH64_ADR_PREL_PG_HI21_NC:
+			overflow_check = false;
+			fallthrough;
+		case R_AARCH64_ADR_PREL_PG_HI21:
+			ovf = reloc_insn_adrp(me, sechdrs, loc, val);
+			if (ovf && ovf != -ERANGE)
+				return ovf;
+			break;
+		case R_AARCH64_ADD_ABS_LO12_NC:
+		case R_AARCH64_LDST8_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 0, 12,
+					     AARCH64_INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST16_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 1, 11,
+					     AARCH64_INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST32_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 2, 10,
+					     AARCH64_INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST64_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 3, 9,
+					     AARCH64_INSN_IMM_12);
+			break;
+		case R_AARCH64_LDST128_ABS_LO12_NC:
+			overflow_check = false;
+			ovf = reloc_insn_imm(RELOC_OP_ABS, loc, val, 4, 8,
+					     AARCH64_INSN_IMM_12);
+			break;
+		case R_AARCH64_TSTBR14:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 14,
+					     AARCH64_INSN_IMM_14);
+			break;
+		case R_AARCH64_CONDBR19:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 19,
+					     AARCH64_INSN_IMM_19);
+			break;
+		case R_AARCH64_JUMP26:
+		case R_AARCH64_CALL26:
+			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 26,
+					     AARCH64_INSN_IMM_26);
+			if (ovf == -ERANGE) {
+				val = module_emit_plt_entry(me, sechdrs, loc, &rel[i], sym);
+				if (!val)
+					return -ENOEXEC;
+				ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2,
+						     26, AARCH64_INSN_IMM_26);
+			}
+			break;
+
+		default:
+			pr_err("module %s: unsupported RELA relocation: %llu\n",
+			       me->name, ELF64_R_TYPE(rel[i].r_info));
+			return -ENOEXEC;
+		}
+
+		if (overflow_check && ovf == -ERANGE)
+			goto overflow;
+
+	}
+
+	return 0;
+
+overflow:
+	pr_err("module %s: overflow in relocation type %d val %Lx\n",
+	       me->name, (int)ELF64_R_TYPE(rel[i].r_info), val);
+	return -ENOEXEC;
+}
+
+static inline void __init_plt(struct plt_entry *plt, unsigned long addr)
+{
+	*plt = get_plt_entry(addr, plt);
+}
+
+static int module_init_ftrace_plt(const Elf_Ehdr *hdr,
+				  const Elf_Shdr *sechdrs,
+				  struct module *mod)
+{
+#if defined(CONFIG_DYNAMIC_FTRACE)
+	const Elf_Shdr *s;
+	struct plt_entry *plts;
+
+	s = find_section(hdr, sechdrs, ".text.ftrace_trampoline");
+	if (!s)
+		return -ENOEXEC;
+
+	plts = (void *)s->sh_addr;
+
+	__init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR);
+
+	mod->arch.ftrace_trampolines = plts;
+#endif
+	return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		    const Elf_Shdr *sechdrs,
+		    struct module *me)
+{
+	const Elf_Shdr *s;
+	s = find_section(hdr, sechdrs, ".altinstructions");
+	if (s)
+		apply_alternatives_module((void *)s->sh_addr, s->sh_size);
+
+	if (scs_is_dynamic()) {
+		s = find_section(hdr, sechdrs, ".init.eh_frame");
+		if (s)
+			scs_patch((void *)s->sh_addr, s->sh_size);
+	}
+
+	return module_init_ftrace_plt(hdr, sechdrs, me);
+}
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
new file mode 100644
index 000000000..4edecaac8
--- /dev/null
+++ b/arch/arm64/kernel/mte.c
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 ARM Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/prctl.h>
+#include <linux/sched.h>
+#include <linux/sched/mm.h>
+#include <linux/string.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
+#include <linux/thread_info.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/uio.h>
+
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/mte.h>
+#include <asm/ptrace.h>
+#include <asm/sysreg.h>
+
+static DEFINE_PER_CPU_READ_MOSTLY(u64, mte_tcf_preferred);
+
+#ifdef CONFIG_KASAN_HW_TAGS
+/*
+ * The asynchronous and asymmetric MTE modes have the same behavior for
+ * store operations. This flag is set when either of these modes is enabled.
+ */
+DEFINE_STATIC_KEY_FALSE(mte_async_or_asymm_mode);
+EXPORT_SYMBOL_GPL(mte_async_or_asymm_mode);
+#endif
+
+void mte_sync_tags(pte_t pte)
+{
+	struct page *page = pte_page(pte);
+	long i, nr_pages = compound_nr(page);
+
+	/* if PG_mte_tagged is set, tags have already been initialised */
+	for (i = 0; i < nr_pages; i++, page++) {
+		if (try_page_mte_tagging(page)) {
+			mte_clear_page_tags(page_address(page));
+			set_page_mte_tagged(page);
+		}
+	}
+
+	/* ensure the tags are visible before the PTE is set */
+	smp_wmb();
+}
+
+int memcmp_pages(struct page *page1, struct page *page2)
+{
+	char *addr1, *addr2;
+	int ret;
+
+	addr1 = page_address(page1);
+	addr2 = page_address(page2);
+	ret = memcmp(addr1, addr2, PAGE_SIZE);
+
+	if (!system_supports_mte() || ret)
+		return ret;
+
+	/*
+	 * If the page content is identical but at least one of the pages is
+	 * tagged, return non-zero to avoid KSM merging. If only one of the
+	 * pages is tagged, set_pte_at() may zero or change the tags of the
+	 * other page via mte_sync_tags().
+	 */
+	if (page_mte_tagged(page1) || page_mte_tagged(page2))
+		return addr1 != addr2;
+
+	return ret;
+}
+
+static inline void __mte_enable_kernel(const char *mode, unsigned long tcf)
+{
+	/* Enable MTE Sync Mode for EL1. */
+	sysreg_clear_set(sctlr_el1, SCTLR_EL1_TCF_MASK,
+			 SYS_FIELD_PREP(SCTLR_EL1, TCF, tcf));
+	isb();
+
+	pr_info_once("MTE: enabled in %s mode at EL1\n", mode);
+}
+
+#ifdef CONFIG_KASAN_HW_TAGS
+void mte_enable_kernel_sync(void)
+{
+	/*
+	 * Make sure we enter this function when no PE has set
+	 * async mode previously.
+	 */
+	WARN_ONCE(system_uses_mte_async_or_asymm_mode(),
+			"MTE async mode enabled system wide!");
+
+	__mte_enable_kernel("synchronous", SCTLR_EL1_TCF_SYNC);
+}
+
+void mte_enable_kernel_async(void)
+{
+	__mte_enable_kernel("asynchronous", SCTLR_EL1_TCF_ASYNC);
+
+	/*
+	 * MTE async mode is set system wide by the first PE that
+	 * executes this function.
+	 *
+	 * Note: If in future KASAN acquires a runtime switching
+	 * mode in between sync and async, this strategy needs
+	 * to be reviewed.
+	 */
+	if (!system_uses_mte_async_or_asymm_mode())
+		static_branch_enable(&mte_async_or_asymm_mode);
+}
+
+void mte_enable_kernel_asymm(void)
+{
+	if (cpus_have_cap(ARM64_MTE_ASYMM)) {
+		__mte_enable_kernel("asymmetric", SCTLR_EL1_TCF_ASYMM);
+
+		/*
+		 * MTE asymm mode behaves as async mode for store
+		 * operations. The mode is set system wide by the
+		 * first PE that executes this function.
+		 *
+		 * Note: If in future KASAN acquires a runtime switching
+		 * mode in between sync and async, this strategy needs
+		 * to be reviewed.
+		 */
+		if (!system_uses_mte_async_or_asymm_mode())
+			static_branch_enable(&mte_async_or_asymm_mode);
+	} else {
+		/*
+		 * If the CPU does not support MTE asymmetric mode the
+		 * kernel falls back on synchronous mode which is the
+		 * default for kasan=on.
+		 */
+		mte_enable_kernel_sync();
+	}
+}
+#endif
+
+#ifdef CONFIG_KASAN_HW_TAGS
+void mte_check_tfsr_el1(void)
+{
+	u64 tfsr_el1 = read_sysreg_s(SYS_TFSR_EL1);
+
+	if (unlikely(tfsr_el1 & SYS_TFSR_EL1_TF1)) {
+		/*
+		 * Note: isb() is not required after this direct write
+		 * because there is no indirect read subsequent to it
+		 * (per ARM DDI 0487F.c table D13-1).
+		 */
+		write_sysreg_s(0, SYS_TFSR_EL1);
+
+		kasan_report_async();
+	}
+}
+#endif
+
+/*
+ * This is where we actually resolve the system and process MTE mode
+ * configuration into an actual value in SCTLR_EL1 that affects
+ * userspace.
+ */
+static void mte_update_sctlr_user(struct task_struct *task)
+{
+	/*
+	 * This must be called with preemption disabled and can only be called
+	 * on the current or next task since the CPU must match where the thread
+	 * is going to run. The caller is responsible for calling
+	 * update_sctlr_el1() later in the same preemption disabled block.
+	 */
+	unsigned long sctlr = task->thread.sctlr_user;
+	unsigned long mte_ctrl = task->thread.mte_ctrl;
+	unsigned long pref, resolved_mte_tcf;
+
+	pref = __this_cpu_read(mte_tcf_preferred);
+	/*
+	 * If there is no overlap between the system preferred and
+	 * program requested values go with what was requested.
+	 */
+	resolved_mte_tcf = (mte_ctrl & pref) ? pref : mte_ctrl;
+	sctlr &= ~SCTLR_EL1_TCF0_MASK;
+	/*
+	 * Pick an actual setting. The order in which we check for
+	 * set bits and map into register values determines our
+	 * default order.
+	 */
+	if (resolved_mte_tcf & MTE_CTRL_TCF_ASYMM)
+		sctlr |= SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF0, ASYMM);
+	else if (resolved_mte_tcf & MTE_CTRL_TCF_ASYNC)
+		sctlr |= SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF0, ASYNC);
+	else if (resolved_mte_tcf & MTE_CTRL_TCF_SYNC)
+		sctlr |= SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF0, SYNC);
+	task->thread.sctlr_user = sctlr;
+}
+
+static void mte_update_gcr_excl(struct task_struct *task)
+{
+	/*
+	 * SYS_GCR_EL1 will be set to current->thread.mte_ctrl value by
+	 * mte_set_user_gcr() in kernel_exit, but only if KASAN is enabled.
+	 */
+	if (kasan_hw_tags_enabled())
+		return;
+
+	write_sysreg_s(
+		((task->thread.mte_ctrl >> MTE_CTRL_GCR_USER_EXCL_SHIFT) &
+		 SYS_GCR_EL1_EXCL_MASK) | SYS_GCR_EL1_RRND,
+		SYS_GCR_EL1);
+}
+
+#ifdef CONFIG_KASAN_HW_TAGS
+/* Only called from assembly, silence sparse */
+void __init kasan_hw_tags_enable(struct alt_instr *alt, __le32 *origptr,
+				 __le32 *updptr, int nr_inst);
+
+void __init kasan_hw_tags_enable(struct alt_instr *alt, __le32 *origptr,
+				 __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 1); /* Branch -> NOP */
+
+	if (kasan_hw_tags_enabled())
+		*updptr = cpu_to_le32(aarch64_insn_gen_nop());
+}
+#endif
+
+void mte_thread_init_user(void)
+{
+	if (!system_supports_mte())
+		return;
+
+	/* clear any pending asynchronous tag fault */
+	dsb(ish);
+	write_sysreg_s(0, SYS_TFSRE0_EL1);
+	clear_thread_flag(TIF_MTE_ASYNC_FAULT);
+	/* disable tag checking and reset tag generation mask */
+	set_mte_ctrl(current, 0);
+}
+
+void mte_thread_switch(struct task_struct *next)
+{
+	if (!system_supports_mte())
+		return;
+
+	mte_update_sctlr_user(next);
+	mte_update_gcr_excl(next);
+
+	/* TCO may not have been disabled on exception entry for the current task. */
+	mte_disable_tco_entry(next);
+
+	/*
+	 * Check if an async tag exception occurred at EL1.
+	 *
+	 * Note: On the context switch path we rely on the dsb() present
+	 * in __switch_to() to guarantee that the indirect writes to TFSR_EL1
+	 * are synchronized before this point.
+	 */
+	isb();
+	mte_check_tfsr_el1();
+}
+
+void mte_cpu_setup(void)
+{
+	u64 rgsr;
+
+	/*
+	 * CnP must be enabled only after the MAIR_EL1 register has been set
+	 * up. Inconsistent MAIR_EL1 between CPUs sharing the same TLB may
+	 * lead to the wrong memory type being used for a brief window during
+	 * CPU power-up.
+	 *
+	 * CnP is not a boot feature so MTE gets enabled before CnP, but let's
+	 * make sure that is the case.
+	 */
+	BUG_ON(read_sysreg(ttbr0_el1) & TTBR_CNP_BIT);
+	BUG_ON(read_sysreg(ttbr1_el1) & TTBR_CNP_BIT);
+
+	/* Normal Tagged memory type at the corresponding MAIR index */
+	sysreg_clear_set(mair_el1,
+			 MAIR_ATTRIDX(MAIR_ATTR_MASK, MT_NORMAL_TAGGED),
+			 MAIR_ATTRIDX(MAIR_ATTR_NORMAL_TAGGED,
+				      MT_NORMAL_TAGGED));
+
+	write_sysreg_s(KERNEL_GCR_EL1, SYS_GCR_EL1);
+
+	/*
+	 * If GCR_EL1.RRND=1 is implemented the same way as RRND=0, then
+	 * RGSR_EL1.SEED must be non-zero for IRG to produce
+	 * pseudorandom numbers. As RGSR_EL1 is UNKNOWN out of reset, we
+	 * must initialize it.
+	 */
+	rgsr = (read_sysreg(CNTVCT_EL0) & SYS_RGSR_EL1_SEED_MASK) <<
+	       SYS_RGSR_EL1_SEED_SHIFT;
+	if (rgsr == 0)
+		rgsr = 1 << SYS_RGSR_EL1_SEED_SHIFT;
+	write_sysreg_s(rgsr, SYS_RGSR_EL1);
+
+	/* clear any pending tag check faults in TFSR*_EL1 */
+	write_sysreg_s(0, SYS_TFSR_EL1);
+	write_sysreg_s(0, SYS_TFSRE0_EL1);
+
+	local_flush_tlb_all();
+}
+
+void mte_suspend_enter(void)
+{
+	if (!system_supports_mte())
+		return;
+
+	/*
+	 * The barriers are required to guarantee that the indirect writes
+	 * to TFSR_EL1 are synchronized before we report the state.
+	 */
+	dsb(nsh);
+	isb();
+
+	/* Report SYS_TFSR_EL1 before suspend entry */
+	mte_check_tfsr_el1();
+}
+
+void mte_suspend_exit(void)
+{
+	if (!system_supports_mte())
+		return;
+
+	mte_cpu_setup();
+}
+
+long set_mte_ctrl(struct task_struct *task, unsigned long arg)
+{
+	u64 mte_ctrl = (~((arg & PR_MTE_TAG_MASK) >> PR_MTE_TAG_SHIFT) &
+			SYS_GCR_EL1_EXCL_MASK) << MTE_CTRL_GCR_USER_EXCL_SHIFT;
+
+	if (!system_supports_mte())
+		return 0;
+
+	if (arg & PR_MTE_TCF_ASYNC)
+		mte_ctrl |= MTE_CTRL_TCF_ASYNC;
+	if (arg & PR_MTE_TCF_SYNC)
+		mte_ctrl |= MTE_CTRL_TCF_SYNC;
+
+	/*
+	 * If the system supports it and both sync and async modes are
+	 * specified then implicitly enable asymmetric mode.
+	 * Userspace could see a mix of both sync and async anyway due
+	 * to differing or changing defaults on CPUs.
+	 */
+	if (cpus_have_cap(ARM64_MTE_ASYMM) &&
+	    (arg & PR_MTE_TCF_ASYNC) &&
+	    (arg & PR_MTE_TCF_SYNC))
+		mte_ctrl |= MTE_CTRL_TCF_ASYMM;
+
+	task->thread.mte_ctrl = mte_ctrl;
+	if (task == current) {
+		preempt_disable();
+		mte_update_sctlr_user(task);
+		mte_update_gcr_excl(task);
+		update_sctlr_el1(task->thread.sctlr_user);
+		preempt_enable();
+	}
+
+	return 0;
+}
+
+long get_mte_ctrl(struct task_struct *task)
+{
+	unsigned long ret;
+	u64 mte_ctrl = task->thread.mte_ctrl;
+	u64 incl = (~mte_ctrl >> MTE_CTRL_GCR_USER_EXCL_SHIFT) &
+		   SYS_GCR_EL1_EXCL_MASK;
+
+	if (!system_supports_mte())
+		return 0;
+
+	ret = incl << PR_MTE_TAG_SHIFT;
+	if (mte_ctrl & MTE_CTRL_TCF_ASYNC)
+		ret |= PR_MTE_TCF_ASYNC;
+	if (mte_ctrl & MTE_CTRL_TCF_SYNC)
+		ret |= PR_MTE_TCF_SYNC;
+
+	return ret;
+}
+
+/*
+ * Access MTE tags in another process' address space as given in mm. Update
+ * the number of tags copied. Return 0 if any tags copied, error otherwise.
+ * Inspired by __access_remote_vm().
+ */
+static int __access_remote_tags(struct mm_struct *mm, unsigned long addr,
+				struct iovec *kiov, unsigned int gup_flags)
+{
+	void __user *buf = kiov->iov_base;
+	size_t len = kiov->iov_len;
+	int err = 0;
+	int write = gup_flags & FOLL_WRITE;
+
+	if (!access_ok(buf, len))
+		return -EFAULT;
+
+	if (mmap_read_lock_killable(mm))
+		return -EIO;
+
+	while (len) {
+		struct vm_area_struct *vma;
+		unsigned long tags, offset;
+		void *maddr;
+		struct page *page = get_user_page_vma_remote(mm, addr,
+							     gup_flags, &vma);
+
+		if (IS_ERR_OR_NULL(page)) {
+			err = page == NULL ? -EIO : PTR_ERR(page);
+			break;
+		}
+
+		/*
+		 * Only copy tags if the page has been mapped as PROT_MTE
+		 * (PG_mte_tagged set). Otherwise the tags are not valid and
+		 * not accessible to user. Moreover, an mprotect(PROT_MTE)
+		 * would cause the existing tags to be cleared if the page
+		 * was never mapped with PROT_MTE.
+		 */
+		if (!(vma->vm_flags & VM_MTE)) {
+			err = -EOPNOTSUPP;
+			put_page(page);
+			break;
+		}
+		WARN_ON_ONCE(!page_mte_tagged(page));
+
+		/* limit access to the end of the page */
+		offset = offset_in_page(addr);
+		tags = min(len, (PAGE_SIZE - offset) / MTE_GRANULE_SIZE);
+
+		maddr = page_address(page);
+		if (write) {
+			tags = mte_copy_tags_from_user(maddr + offset, buf, tags);
+			set_page_dirty_lock(page);
+		} else {
+			tags = mte_copy_tags_to_user(buf, maddr + offset, tags);
+		}
+		put_page(page);
+
+		/* error accessing the tracer's buffer */
+		if (!tags)
+			break;
+
+		len -= tags;
+		buf += tags;
+		addr += tags * MTE_GRANULE_SIZE;
+	}
+	mmap_read_unlock(mm);
+
+	/* return an error if no tags copied */
+	kiov->iov_len = buf - kiov->iov_base;
+	if (!kiov->iov_len) {
+		/* check for error accessing the tracee's address space */
+		if (err)
+			return -EIO;
+		else
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*
+ * Copy MTE tags in another process' address space at 'addr' to/from tracer's
+ * iovec buffer. Return 0 on success. Inspired by ptrace_access_vm().
+ */
+static int access_remote_tags(struct task_struct *tsk, unsigned long addr,
+			      struct iovec *kiov, unsigned int gup_flags)
+{
+	struct mm_struct *mm;
+	int ret;
+
+	mm = get_task_mm(tsk);
+	if (!mm)
+		return -EPERM;
+
+	if (!tsk->ptrace || (current != tsk->parent) ||
+	    ((get_dumpable(mm) != SUID_DUMP_USER) &&
+	     !ptracer_capable(tsk, mm->user_ns))) {
+		mmput(mm);
+		return -EPERM;
+	}
+
+	ret = __access_remote_tags(mm, addr, kiov, gup_flags);
+	mmput(mm);
+
+	return ret;
+}
+
+int mte_ptrace_copy_tags(struct task_struct *child, long request,
+			 unsigned long addr, unsigned long data)
+{
+	int ret;
+	struct iovec kiov;
+	struct iovec __user *uiov = (void __user *)data;
+	unsigned int gup_flags = FOLL_FORCE;
+
+	if (!system_supports_mte())
+		return -EIO;
+
+	if (get_user(kiov.iov_base, &uiov->iov_base) ||
+	    get_user(kiov.iov_len, &uiov->iov_len))
+		return -EFAULT;
+
+	if (request == PTRACE_POKEMTETAGS)
+		gup_flags |= FOLL_WRITE;
+
+	/* align addr to the MTE tag granule */
+	addr &= MTE_GRANULE_MASK;
+
+	ret = access_remote_tags(child, addr, &kiov, gup_flags);
+	if (!ret)
+		ret = put_user(kiov.iov_len, &uiov->iov_len);
+
+	return ret;
+}
+
+static ssize_t mte_tcf_preferred_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	switch (per_cpu(mte_tcf_preferred, dev->id)) {
+	case MTE_CTRL_TCF_ASYNC:
+		return sysfs_emit(buf, "async\n");
+	case MTE_CTRL_TCF_SYNC:
+		return sysfs_emit(buf, "sync\n");
+	case MTE_CTRL_TCF_ASYMM:
+		return sysfs_emit(buf, "asymm\n");
+	default:
+		return sysfs_emit(buf, "???\n");
+	}
+}
+
+static ssize_t mte_tcf_preferred_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	u64 tcf;
+
+	if (sysfs_streq(buf, "async"))
+		tcf = MTE_CTRL_TCF_ASYNC;
+	else if (sysfs_streq(buf, "sync"))
+		tcf = MTE_CTRL_TCF_SYNC;
+	else if (cpus_have_cap(ARM64_MTE_ASYMM) && sysfs_streq(buf, "asymm"))
+		tcf = MTE_CTRL_TCF_ASYMM;
+	else
+		return -EINVAL;
+
+	device_lock(dev);
+	per_cpu(mte_tcf_preferred, dev->id) = tcf;
+	device_unlock(dev);
+
+	return count;
+}
+static DEVICE_ATTR_RW(mte_tcf_preferred);
+
+static int register_mte_tcf_preferred_sysctl(void)
+{
+	unsigned int cpu;
+
+	if (!system_supports_mte())
+		return 0;
+
+	for_each_possible_cpu(cpu) {
+		per_cpu(mte_tcf_preferred, cpu) = MTE_CTRL_TCF_ASYNC;
+		device_create_file(get_cpu_device(cpu),
+				   &dev_attr_mte_tcf_preferred);
+	}
+
+	return 0;
+}
+subsys_initcall(register_mte_tcf_preferred_sysctl);
+
+/*
+ * Return 0 on success, the number of bytes not probed otherwise.
+ */
+size_t mte_probe_user_range(const char __user *uaddr, size_t size)
+{
+	const char __user *end = uaddr + size;
+	int err = 0;
+	char val;
+
+	__raw_get_user(val, uaddr, err);
+	if (err)
+		return size;
+
+	uaddr = PTR_ALIGN(uaddr, MTE_GRANULE_SIZE);
+	while (uaddr < end) {
+		/*
+		 * A read is sufficient for mte, the caller should have probed
+		 * for the pte write permission if required.
+		 */
+		__raw_get_user(val, uaddr, err);
+		if (err)
+			return end - uaddr;
+		uaddr += MTE_GRANULE_SIZE;
+	}
+	(void)val;
+
+	return 0;
+}
diff --git a/arch/arm64/kernel/paravirt.c b/arch/arm64/kernel/paravirt.c
new file mode 100644
index 000000000..aa718d6a9
--- /dev/null
+++ b/arch/arm64/kernel/paravirt.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2013 Citrix Systems
+ *
+ * Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+ */
+
+#define pr_fmt(fmt) "arm-pv: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/cpuhotplug.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/jump_label.h>
+#include <linux/printk.h>
+#include <linux/psci.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/static_call.h>
+
+#include <asm/paravirt.h>
+#include <asm/pvclock-abi.h>
+#include <asm/smp_plat.h>
+
+struct static_key paravirt_steal_enabled;
+struct static_key paravirt_steal_rq_enabled;
+
+static u64 native_steal_clock(int cpu)
+{
+	return 0;
+}
+
+DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock);
+
+struct pv_time_stolen_time_region {
+	struct pvclock_vcpu_stolen_time __rcu *kaddr;
+};
+
+static DEFINE_PER_CPU(struct pv_time_stolen_time_region, stolen_time_region);
+
+static bool steal_acc = true;
+static int __init parse_no_stealacc(char *arg)
+{
+	steal_acc = false;
+	return 0;
+}
+
+early_param("no-steal-acc", parse_no_stealacc);
+
+/* return stolen time in ns by asking the hypervisor */
+static u64 para_steal_clock(int cpu)
+{
+	struct pvclock_vcpu_stolen_time *kaddr = NULL;
+	struct pv_time_stolen_time_region *reg;
+	u64 ret = 0;
+
+	reg = per_cpu_ptr(&stolen_time_region, cpu);
+
+	/*
+	 * paravirt_steal_clock() may be called before the CPU
+	 * online notification callback runs. Until the callback
+	 * has run we just return zero.
+	 */
+	rcu_read_lock();
+	kaddr = rcu_dereference(reg->kaddr);
+	if (!kaddr) {
+		rcu_read_unlock();
+		return 0;
+	}
+
+	ret = le64_to_cpu(READ_ONCE(kaddr->stolen_time));
+	rcu_read_unlock();
+	return ret;
+}
+
+static int stolen_time_cpu_down_prepare(unsigned int cpu)
+{
+	struct pvclock_vcpu_stolen_time *kaddr = NULL;
+	struct pv_time_stolen_time_region *reg;
+
+	reg = this_cpu_ptr(&stolen_time_region);
+	if (!reg->kaddr)
+		return 0;
+
+	kaddr = rcu_replace_pointer(reg->kaddr, NULL, true);
+	synchronize_rcu();
+	memunmap(kaddr);
+
+	return 0;
+}
+
+static int stolen_time_cpu_online(unsigned int cpu)
+{
+	struct pvclock_vcpu_stolen_time *kaddr = NULL;
+	struct pv_time_stolen_time_region *reg;
+	struct arm_smccc_res res;
+
+	reg = this_cpu_ptr(&stolen_time_region);
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_HV_PV_TIME_ST, &res);
+
+	if (res.a0 == SMCCC_RET_NOT_SUPPORTED)
+		return -EINVAL;
+
+	kaddr = memremap(res.a0,
+			      sizeof(struct pvclock_vcpu_stolen_time),
+			      MEMREMAP_WB);
+
+	rcu_assign_pointer(reg->kaddr, kaddr);
+
+	if (!reg->kaddr) {
+		pr_warn("Failed to map stolen time data structure\n");
+		return -ENOMEM;
+	}
+
+	if (le32_to_cpu(kaddr->revision) != 0 ||
+	    le32_to_cpu(kaddr->attributes) != 0) {
+		pr_warn_once("Unexpected revision or attributes in stolen time data\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int __init pv_time_init_stolen_time(void)
+{
+	int ret;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				"hypervisor/arm/pvtime:online",
+				stolen_time_cpu_online,
+				stolen_time_cpu_down_prepare);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static bool __init has_pv_steal_clock(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_HV_PV_TIME_FEATURES, &res);
+
+	if (res.a0 != SMCCC_RET_SUCCESS)
+		return false;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_HV_PV_TIME_FEATURES,
+			     ARM_SMCCC_HV_PV_TIME_ST, &res);
+
+	return (res.a0 == SMCCC_RET_SUCCESS);
+}
+
+int __init pv_time_init(void)
+{
+	int ret;
+
+	if (!has_pv_steal_clock())
+		return 0;
+
+	ret = pv_time_init_stolen_time();
+	if (ret)
+		return ret;
+
+	static_call_update(pv_steal_clock, para_steal_clock);
+
+	static_key_slow_inc(&paravirt_steal_enabled);
+	if (steal_acc)
+		static_key_slow_inc(&paravirt_steal_rq_enabled);
+
+	pr_info("using stolen time PV\n");
+
+	return 0;
+}
diff --git a/arch/arm64/kernel/patch-scs.c b/arch/arm64/kernel/patch-scs.c
new file mode 100644
index 000000000..a1fe4b4ff
--- /dev/null
+++ b/arch/arm64/kernel/patch-scs.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 - Google LLC
+ * Author: Ard Biesheuvel <ardb@google.com>
+ */
+
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+
+#include <asm/cacheflush.h>
+#include <asm/scs.h>
+
+//
+// This minimal DWARF CFI parser is partially based on the code in
+// arch/arc/kernel/unwind.c, and on the document below:
+// https://refspecs.linuxbase.org/LSB_4.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html
+//
+
+#define DW_CFA_nop                          0x00
+#define DW_CFA_set_loc                      0x01
+#define DW_CFA_advance_loc1                 0x02
+#define DW_CFA_advance_loc2                 0x03
+#define DW_CFA_advance_loc4                 0x04
+#define DW_CFA_offset_extended              0x05
+#define DW_CFA_restore_extended             0x06
+#define DW_CFA_undefined                    0x07
+#define DW_CFA_same_value                   0x08
+#define DW_CFA_register                     0x09
+#define DW_CFA_remember_state               0x0a
+#define DW_CFA_restore_state                0x0b
+#define DW_CFA_def_cfa                      0x0c
+#define DW_CFA_def_cfa_register             0x0d
+#define DW_CFA_def_cfa_offset               0x0e
+#define DW_CFA_def_cfa_expression           0x0f
+#define DW_CFA_expression                   0x10
+#define DW_CFA_offset_extended_sf           0x11
+#define DW_CFA_def_cfa_sf                   0x12
+#define DW_CFA_def_cfa_offset_sf            0x13
+#define DW_CFA_val_offset                   0x14
+#define DW_CFA_val_offset_sf                0x15
+#define DW_CFA_val_expression               0x16
+#define DW_CFA_lo_user                      0x1c
+#define DW_CFA_negate_ra_state              0x2d
+#define DW_CFA_GNU_args_size                0x2e
+#define DW_CFA_GNU_negative_offset_extended 0x2f
+#define DW_CFA_hi_user                      0x3f
+
+extern const u8 __eh_frame_start[], __eh_frame_end[];
+
+enum {
+	PACIASP		= 0xd503233f,
+	AUTIASP		= 0xd50323bf,
+	SCS_PUSH	= 0xf800865e,
+	SCS_POP		= 0xf85f8e5e,
+};
+
+static void __always_inline scs_patch_loc(u64 loc)
+{
+	u32 insn = le32_to_cpup((void *)loc);
+
+	switch (insn) {
+	case PACIASP:
+		*(u32 *)loc = cpu_to_le32(SCS_PUSH);
+		break;
+	case AUTIASP:
+		*(u32 *)loc = cpu_to_le32(SCS_POP);
+		break;
+	default:
+		/*
+		 * While the DW_CFA_negate_ra_state directive is guaranteed to
+		 * appear right after a PACIASP/AUTIASP instruction, it may
+		 * also appear after a DW_CFA_restore_state directive that
+		 * restores a state that is only partially accurate, and is
+		 * followed by DW_CFA_negate_ra_state directive to toggle the
+		 * PAC bit again. So we permit other instructions here, and ignore
+		 * them.
+		 */
+		return;
+	}
+	dcache_clean_pou(loc, loc + sizeof(u32));
+}
+
+/*
+ * Skip one uleb128/sleb128 encoded quantity from the opcode stream. All bytes
+ * except the last one have bit #7 set.
+ */
+static int __always_inline skip_xleb128(const u8 **opcode, int size)
+{
+	u8 c;
+
+	do {
+		c = *(*opcode)++;
+		size--;
+	} while (c & BIT(7));
+
+	return size;
+}
+
+struct eh_frame {
+	/*
+	 * The size of this frame if 0 < size < U32_MAX, 0 terminates the list.
+	 */
+	u32	size;
+
+	/*
+	 * The first frame is a Common Information Entry (CIE) frame, followed
+	 * by one or more Frame Description Entry (FDE) frames. In the former
+	 * case, this field is 0, otherwise it is the negated offset relative
+	 * to the associated CIE frame.
+	 */
+	u32	cie_id_or_pointer;
+
+	union {
+		struct { // CIE
+			u8	version;
+			u8	augmentation_string[];
+		};
+
+		struct { // FDE
+			s32	initial_loc;
+			s32	range;
+			u8	opcodes[];
+		};
+	};
+};
+
+static int noinstr scs_handle_fde_frame(const struct eh_frame *frame,
+					bool fde_has_augmentation_data,
+					int code_alignment_factor,
+					bool dry_run)
+{
+	int size = frame->size - offsetof(struct eh_frame, opcodes) + 4;
+	u64 loc = (u64)offset_to_ptr(&frame->initial_loc);
+	const u8 *opcode = frame->opcodes;
+
+	if (fde_has_augmentation_data) {
+		int l;
+
+		// assume single byte uleb128_t
+		if (WARN_ON(*opcode & BIT(7)))
+			return -ENOEXEC;
+
+		l = *opcode++;
+		opcode += l;
+		size -= l + 1;
+	}
+
+	/*
+	 * Starting from 'loc', apply the CFA opcodes that advance the location
+	 * pointer, and identify the locations of the PAC instructions.
+	 */
+	while (size-- > 0) {
+		switch (*opcode++) {
+		case DW_CFA_nop:
+		case DW_CFA_remember_state:
+		case DW_CFA_restore_state:
+			break;
+
+		case DW_CFA_advance_loc1:
+			loc += *opcode++ * code_alignment_factor;
+			size--;
+			break;
+
+		case DW_CFA_advance_loc2:
+			loc += *opcode++ * code_alignment_factor;
+			loc += (*opcode++ << 8) * code_alignment_factor;
+			size -= 2;
+			break;
+
+		case DW_CFA_def_cfa:
+		case DW_CFA_offset_extended:
+			size = skip_xleb128(&opcode, size);
+			fallthrough;
+		case DW_CFA_def_cfa_offset:
+		case DW_CFA_def_cfa_offset_sf:
+		case DW_CFA_def_cfa_register:
+		case DW_CFA_same_value:
+		case DW_CFA_restore_extended:
+		case 0x80 ... 0xbf:
+			size = skip_xleb128(&opcode, size);
+			break;
+
+		case DW_CFA_negate_ra_state:
+			if (!dry_run)
+				scs_patch_loc(loc - 4);
+			break;
+
+		case 0x40 ... 0x7f:
+			// advance loc
+			loc += (opcode[-1] & 0x3f) * code_alignment_factor;
+			break;
+
+		case 0xc0 ... 0xff:
+			break;
+
+		default:
+			pr_err("unhandled opcode: %02x in FDE frame %lx\n", opcode[-1], (uintptr_t)frame);
+			return -ENOEXEC;
+		}
+	}
+	return 0;
+}
+
+int noinstr scs_patch(const u8 eh_frame[], int size)
+{
+	const u8 *p = eh_frame;
+
+	while (size > 4) {
+		const struct eh_frame *frame = (const void *)p;
+		bool fde_has_augmentation_data = true;
+		int code_alignment_factor = 1;
+		int ret;
+
+		if (frame->size == 0 ||
+		    frame->size == U32_MAX ||
+		    frame->size > size)
+			break;
+
+		if (frame->cie_id_or_pointer == 0) {
+			const u8 *p = frame->augmentation_string;
+
+			/* a 'z' in the augmentation string must come first */
+			fde_has_augmentation_data = *p == 'z';
+
+			/*
+			 * The code alignment factor is a uleb128 encoded field
+			 * but given that the only sensible values are 1 or 4,
+			 * there is no point in decoding the whole thing.
+			 */
+			p += strlen(p) + 1;
+			if (!WARN_ON(*p & BIT(7)))
+				code_alignment_factor = *p;
+		} else {
+			ret = scs_handle_fde_frame(frame,
+						   fde_has_augmentation_data,
+						   code_alignment_factor,
+						   true);
+			if (ret)
+				return ret;
+			scs_handle_fde_frame(frame, fde_has_augmentation_data,
+					     code_alignment_factor, false);
+		}
+
+		p += sizeof(frame->size) + frame->size;
+		size -= sizeof(frame->size) + frame->size;
+	}
+	return 0;
+}
+
+asmlinkage void __init scs_patch_vmlinux(void)
+{
+	if (!should_patch_pac_into_scs())
+		return;
+
+	WARN_ON(scs_patch(__eh_frame_start, __eh_frame_end - __eh_frame_start));
+	icache_inval_all_pou();
+	isb();
+}
diff --git a/arch/arm64/kernel/patching.c b/arch/arm64/kernel/patching.c
new file mode 100644
index 000000000..b4835f6d5
--- /dev/null
+++ b/arch/arm64/kernel/patching.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/stop_machine.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/fixmap.h>
+#include <asm/insn.h>
+#include <asm/kprobes.h>
+#include <asm/patching.h>
+#include <asm/sections.h>
+
+static DEFINE_RAW_SPINLOCK(patch_lock);
+
+static bool is_exit_text(unsigned long addr)
+{
+	/* discarded with init text/data */
+	return system_state < SYSTEM_RUNNING &&
+		addr >= (unsigned long)__exittext_begin &&
+		addr < (unsigned long)__exittext_end;
+}
+
+static bool is_image_text(unsigned long addr)
+{
+	return core_kernel_text(addr) || is_exit_text(addr);
+}
+
+static void __kprobes *patch_map(void *addr, int fixmap)
+{
+	unsigned long uintaddr = (uintptr_t) addr;
+	bool image = is_image_text(uintaddr);
+	struct page *page;
+
+	if (image)
+		page = phys_to_page(__pa_symbol(addr));
+	else if (IS_ENABLED(CONFIG_STRICT_MODULE_RWX))
+		page = vmalloc_to_page(addr);
+	else
+		return addr;
+
+	BUG_ON(!page);
+	return (void *)set_fixmap_offset(fixmap, page_to_phys(page) +
+			(uintaddr & ~PAGE_MASK));
+}
+
+static void __kprobes patch_unmap(int fixmap)
+{
+	clear_fixmap(fixmap);
+}
+/*
+ * In ARMv8-A, A64 instructions have a fixed length of 32 bits and are always
+ * little-endian.
+ */
+int __kprobes aarch64_insn_read(void *addr, u32 *insnp)
+{
+	int ret;
+	__le32 val;
+
+	ret = copy_from_kernel_nofault(&val, addr, AARCH64_INSN_SIZE);
+	if (!ret)
+		*insnp = le32_to_cpu(val);
+
+	return ret;
+}
+
+static int __kprobes __aarch64_insn_write(void *addr, __le32 insn)
+{
+	void *waddr = addr;
+	unsigned long flags = 0;
+	int ret;
+
+	raw_spin_lock_irqsave(&patch_lock, flags);
+	waddr = patch_map(addr, FIX_TEXT_POKE0);
+
+	ret = copy_to_kernel_nofault(waddr, &insn, AARCH64_INSN_SIZE);
+
+	patch_unmap(FIX_TEXT_POKE0);
+	raw_spin_unlock_irqrestore(&patch_lock, flags);
+
+	return ret;
+}
+
+int __kprobes aarch64_insn_write(void *addr, u32 insn)
+{
+	return __aarch64_insn_write(addr, cpu_to_le32(insn));
+}
+
+noinstr int aarch64_insn_write_literal_u64(void *addr, u64 val)
+{
+	u64 *waddr;
+	unsigned long flags;
+	int ret;
+
+	raw_spin_lock_irqsave(&patch_lock, flags);
+	waddr = patch_map(addr, FIX_TEXT_POKE0);
+
+	ret = copy_to_kernel_nofault(waddr, &val, sizeof(val));
+
+	patch_unmap(FIX_TEXT_POKE0);
+	raw_spin_unlock_irqrestore(&patch_lock, flags);
+
+	return ret;
+}
+
+int __kprobes aarch64_insn_patch_text_nosync(void *addr, u32 insn)
+{
+	u32 *tp = addr;
+	int ret;
+
+	/* A64 instructions must be word aligned */
+	if ((uintptr_t)tp & 0x3)
+		return -EINVAL;
+
+	ret = aarch64_insn_write(tp, insn);
+	if (ret == 0)
+		caches_clean_inval_pou((uintptr_t)tp,
+				     (uintptr_t)tp + AARCH64_INSN_SIZE);
+
+	return ret;
+}
+
+struct aarch64_insn_patch {
+	void		**text_addrs;
+	u32		*new_insns;
+	int		insn_cnt;
+	atomic_t	cpu_count;
+};
+
+static int __kprobes aarch64_insn_patch_text_cb(void *arg)
+{
+	int i, ret = 0;
+	struct aarch64_insn_patch *pp = arg;
+
+	/* The last CPU becomes master */
+	if (atomic_inc_return(&pp->cpu_count) == num_online_cpus()) {
+		for (i = 0; ret == 0 && i < pp->insn_cnt; i++)
+			ret = aarch64_insn_patch_text_nosync(pp->text_addrs[i],
+							     pp->new_insns[i]);
+		/* Notify other processors with an additional increment. */
+		atomic_inc(&pp->cpu_count);
+	} else {
+		while (atomic_read(&pp->cpu_count) <= num_online_cpus())
+			cpu_relax();
+		isb();
+	}
+
+	return ret;
+}
+
+int __kprobes aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt)
+{
+	struct aarch64_insn_patch patch = {
+		.text_addrs = addrs,
+		.new_insns = insns,
+		.insn_cnt = cnt,
+		.cpu_count = ATOMIC_INIT(0),
+	};
+
+	if (cnt <= 0)
+		return -EINVAL;
+
+	return stop_machine_cpuslocked(aarch64_insn_patch_text_cb, &patch,
+				       cpu_online_mask);
+}
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
new file mode 100644
index 000000000..f872c57e9
--- /dev/null
+++ b/arch/arm64/kernel/pci.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Code borrowed from powerpc/kernel/pci-common.c
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2014 ARM Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_ACPI
+/*
+ * Try to assign the IRQ number when probing a new device
+ */
+int pcibios_alloc_irq(struct pci_dev *dev)
+{
+	if (!acpi_disabled)
+		acpi_pci_irq_enable(dev);
+
+	return 0;
+}
+#endif
+
+/*
+ * raw_pci_read/write - Platform-specific PCI config space access.
+ */
+int raw_pci_read(unsigned int domain, unsigned int bus,
+		  unsigned int devfn, int reg, int len, u32 *val)
+{
+	struct pci_bus *b = pci_find_bus(domain, bus);
+
+	if (!b)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	return b->ops->read(b, devfn, reg, len, val);
+}
+
+int raw_pci_write(unsigned int domain, unsigned int bus,
+		unsigned int devfn, int reg, int len, u32 val)
+{
+	struct pci_bus *b = pci_find_bus(domain, bus);
+
+	if (!b)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	return b->ops->write(b, devfn, reg, len, val);
+}
+
+#ifdef CONFIG_NUMA
+
+int pcibus_to_node(struct pci_bus *bus)
+{
+	return dev_to_node(&bus->dev);
+}
+EXPORT_SYMBOL(pcibus_to_node);
+
+#endif
+
+#ifdef CONFIG_ACPI
+
+struct acpi_pci_generic_root_info {
+	struct acpi_pci_root_info	common;
+	struct pci_config_window	*cfg;	/* config space mapping */
+};
+
+int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+
+	return root->segment;
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct pci_config_window *cfg;
+	struct acpi_device *adev;
+	struct device *bus_dev;
+
+	if (acpi_disabled)
+		return 0;
+
+	cfg = bridge->bus->sysdata;
+
+	/*
+	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
+	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
+	 * NULL in this case because there is no proper ACPI device.
+	 */
+	if (!cfg->parent)
+		adev = NULL;
+	else
+		adev = to_acpi_device(cfg->parent);
+
+	bus_dev = &bridge->bus->dev;
+
+	ACPI_COMPANION_SET(&bridge->dev, adev);
+	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
+
+	return 0;
+}
+
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
+{
+	struct resource_entry *entry, *tmp;
+	int status;
+
+	status = acpi_pci_probe_root_resources(ci);
+	resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+		if (!(entry->res->flags & IORESOURCE_WINDOW))
+			resource_list_destroy_entry(entry);
+	}
+	return status;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static struct pci_config_window *
+pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
+{
+	struct device *dev = &root->device->dev;
+	struct resource *bus_res = &root->secondary;
+	u16 seg = root->segment;
+	const struct pci_ecam_ops *ecam_ops;
+	struct resource cfgres;
+	struct acpi_device *adev;
+	struct pci_config_window *cfg;
+	int ret;
+
+	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+	if (ret) {
+		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
+		return NULL;
+	}
+
+	adev = acpi_resource_consumer(&cfgres);
+	if (adev)
+		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
+			 dev_name(&adev->dev));
+	else
+		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
+			 &cfgres);
+
+	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
+	if (IS_ERR(cfg)) {
+		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
+			PTR_ERR(cfg));
+		return NULL;
+	}
+
+	return cfg;
+}
+
+/* release_info: free resources allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+	struct acpi_pci_generic_root_info *ri;
+
+	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+	pci_ecam_free(ri->cfg);
+	kfree(ci->ops);
+	kfree(ri);
+}
+
+/* Interface called from ACPI code to setup PCI host controller */
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	struct acpi_pci_generic_root_info *ri;
+	struct pci_bus *bus, *child;
+	struct acpi_pci_root_ops *root_ops;
+	struct pci_host_bridge *host;
+
+	ri = kzalloc(sizeof(*ri), GFP_KERNEL);
+	if (!ri)
+		return NULL;
+
+	root_ops = kzalloc(sizeof(*root_ops), GFP_KERNEL);
+	if (!root_ops) {
+		kfree(ri);
+		return NULL;
+	}
+
+	ri->cfg = pci_acpi_setup_ecam_mapping(root);
+	if (!ri->cfg) {
+		kfree(ri);
+		kfree(root_ops);
+		return NULL;
+	}
+
+	root_ops->release_info = pci_acpi_generic_release_info;
+	root_ops->prepare_resources = pci_acpi_root_prepare_resources;
+	root_ops->pci_ops = (struct pci_ops *)&ri->cfg->ops->pci_ops;
+	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
+	if (!bus)
+		return NULL;
+
+	/* If we must preserve the resource configuration, claim now */
+	host = pci_find_host_bridge(bus);
+	if (host->preserve_config)
+		pci_bus_claim_resources(bus);
+
+	/*
+	 * Assign whatever was left unassigned. If we didn't claim above,
+	 * this will reassign everything.
+	 */
+	pci_assign_unassigned_root_bus_resources(bus);
+
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+
+	return bus;
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
+#endif
diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c
new file mode 100644
index 000000000..6d157f321
--- /dev/null
+++ b/arch/arm64/kernel/perf_callchain.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arm64 callchain support
+ *
+ * Copyright (C) 2015 ARM Limited
+ */
+#include <linux/perf_event.h>
+#include <linux/stacktrace.h>
+#include <linux/uaccess.h>
+
+#include <asm/pointer_auth.h>
+
+struct frame_tail {
+	struct frame_tail	__user *fp;
+	unsigned long		lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
+	       struct perf_callchain_entry_ctx *entry)
+{
+	struct frame_tail buftail;
+	unsigned long err;
+	unsigned long lr;
+
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(tail, sizeof(buftail)))
+		return NULL;
+
+	pagefault_disable();
+	err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail));
+	pagefault_enable();
+
+	if (err)
+		return NULL;
+
+	lr = ptrauth_strip_user_insn_pac(buftail.lr);
+
+	perf_callchain_store(entry, lr);
+
+	/*
+	 * Frame pointers should strictly progress back up the stack
+	 * (towards higher addresses).
+	 */
+	if (tail >= buftail.fp)
+		return NULL;
+
+	return buftail.fp;
+}
+
+#ifdef CONFIG_COMPAT
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct compat_frame_tail *)(xxx->fp)-1
+ *
+ * This code has been adapted from the ARM OProfile support.
+ */
+struct compat_frame_tail {
+	compat_uptr_t	fp; /* a (struct compat_frame_tail *) in compat mode */
+	u32		sp;
+	u32		lr;
+} __attribute__((packed));
+
+static struct compat_frame_tail __user *
+compat_user_backtrace(struct compat_frame_tail __user *tail,
+		      struct perf_callchain_entry_ctx *entry)
+{
+	struct compat_frame_tail buftail;
+	unsigned long err;
+
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(tail, sizeof(buftail)))
+		return NULL;
+
+	pagefault_disable();
+	err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail));
+	pagefault_enable();
+
+	if (err)
+		return NULL;
+
+	perf_callchain_store(entry, buftail.lr);
+
+	/*
+	 * Frame pointers should strictly progress back up the stack
+	 * (towards higher addresses).
+	 */
+	if (tail + 1 >= (struct compat_frame_tail __user *)
+			compat_ptr(buftail.fp))
+		return NULL;
+
+	return (struct compat_frame_tail __user *)compat_ptr(buftail.fp) - 1;
+}
+#endif /* CONFIG_COMPAT */
+
+void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
+			 struct pt_regs *regs)
+{
+	if (perf_guest_state()) {
+		/* We don't support guest os callchain now */
+		return;
+	}
+
+	perf_callchain_store(entry, regs->pc);
+
+	if (!compat_user_mode(regs)) {
+		/* AARCH64 mode */
+		struct frame_tail __user *tail;
+
+		tail = (struct frame_tail __user *)regs->regs[29];
+
+		while (entry->nr < entry->max_stack &&
+		       tail && !((unsigned long)tail & 0x7))
+			tail = user_backtrace(tail, entry);
+	} else {
+#ifdef CONFIG_COMPAT
+		/* AARCH32 compat mode */
+		struct compat_frame_tail __user *tail;
+
+		tail = (struct compat_frame_tail __user *)regs->compat_fp - 1;
+
+		while ((entry->nr < entry->max_stack) &&
+			tail && !((unsigned long)tail & 0x3))
+			tail = compat_user_backtrace(tail, entry);
+#endif
+	}
+}
+
+static bool callchain_trace(void *data, unsigned long pc)
+{
+	struct perf_callchain_entry_ctx *entry = data;
+	return perf_callchain_store(entry, pc) == 0;
+}
+
+void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
+			   struct pt_regs *regs)
+{
+	if (perf_guest_state()) {
+		/* We don't support guest os callchain now */
+		return;
+	}
+
+	arch_stack_walk(callchain_trace, entry, current, regs);
+}
+
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
+	if (perf_guest_state())
+		return perf_guest_get_ip();
+
+	return instruction_pointer(regs);
+}
+
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+	unsigned int guest_state = perf_guest_state();
+	int misc = 0;
+
+	if (guest_state) {
+		if (guest_state & PERF_GUEST_USER)
+			misc |= PERF_RECORD_MISC_GUEST_USER;
+		else
+			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
+	} else {
+		if (user_mode(regs))
+			misc |= PERF_RECORD_MISC_USER;
+		else
+			misc |= PERF_RECORD_MISC_KERNEL;
+	}
+
+	return misc;
+}
diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c
new file mode 100644
index 000000000..b4eece3eb
--- /dev/null
+++ b/arch/arm64/kernel/perf_regs.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/compat.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/bug.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/perf_regs.h>
+#include <asm/ptrace.h>
+
+static u64 perf_ext_regs_value(int idx)
+{
+	switch (idx) {
+	case PERF_REG_ARM64_VG:
+		if (WARN_ON_ONCE(!system_supports_sve()))
+			return 0;
+
+		/*
+		 * Vector granule is current length in bits of SVE registers
+		 * divided by 64.
+		 */
+		return (task_get_sve_vl(current) * 8) / 64;
+	default:
+		WARN_ON_ONCE(true);
+		return 0;
+	}
+}
+
+u64 perf_reg_value(struct pt_regs *regs, int idx)
+{
+	if (WARN_ON_ONCE((u32)idx >= PERF_REG_ARM64_EXTENDED_MAX))
+		return 0;
+
+	/*
+	 * Our handling of compat tasks (PERF_SAMPLE_REGS_ABI_32) is weird, but
+	 * we're stuck with it for ABI compatibility reasons.
+	 *
+	 * For a 32-bit consumer inspecting a 32-bit task, then it will look at
+	 * the first 16 registers (see arch/arm/include/uapi/asm/perf_regs.h).
+	 * These correspond directly to a prefix of the registers saved in our
+	 * 'struct pt_regs', with the exception of the PC, so we copy that down
+	 * (x15 corresponds to SP_hyp in the architecture).
+	 *
+	 * So far, so good.
+	 *
+	 * The oddity arises when a 64-bit consumer looks at a 32-bit task and
+	 * asks for registers beyond PERF_REG_ARM_MAX. In this case, we return
+	 * SP_usr, LR_usr and PC in the positions where the AArch64 SP, LR and
+	 * PC registers would normally live. The initial idea was to allow a
+	 * 64-bit unwinder to unwind a 32-bit task and, although it's not clear
+	 * how well that works in practice, somebody might be relying on it.
+	 *
+	 * At the time we make a sample, we don't know whether the consumer is
+	 * 32-bit or 64-bit, so we have to cater for both possibilities.
+	 */
+	if (compat_user_mode(regs)) {
+		if ((u32)idx == PERF_REG_ARM64_SP)
+			return regs->compat_sp;
+		if ((u32)idx == PERF_REG_ARM64_LR)
+			return regs->compat_lr;
+		if (idx == 15)
+			return regs->pc;
+	}
+
+	if ((u32)idx == PERF_REG_ARM64_SP)
+		return regs->sp;
+
+	if ((u32)idx == PERF_REG_ARM64_PC)
+		return regs->pc;
+
+	if ((u32)idx >= PERF_REG_ARM64_MAX)
+		return perf_ext_regs_value(idx);
+
+	return regs->regs[idx];
+}
+
+#define REG_RESERVED (~((1ULL << PERF_REG_ARM64_MAX) - 1))
+
+int perf_reg_validate(u64 mask)
+{
+	u64 reserved_mask = REG_RESERVED;
+
+	if (system_supports_sve())
+		reserved_mask &= ~(1ULL << PERF_REG_ARM64_VG);
+
+	if (!mask || mask & reserved_mask)
+		return -EINVAL;
+
+	return 0;
+}
+
+u64 perf_reg_abi(struct task_struct *task)
+{
+	if (is_compat_thread(task_thread_info(task)))
+		return PERF_SAMPLE_REGS_ABI_32;
+	else
+		return PERF_SAMPLE_REGS_ABI_64;
+}
+
+void perf_get_regs_user(struct perf_regs *regs_user,
+			struct pt_regs *regs)
+{
+	regs_user->regs = task_pt_regs(current);
+	regs_user->abi = perf_reg_abi(current);
+}
diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
new file mode 100644
index 000000000..4c0ea3cd4
--- /dev/null
+++ b/arch/arm64/kernel/pi/Makefile
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2022 Google LLC
+
+KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) -fpie \
+		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
+		   $(call cc-option,-mbranch-protection=none) \
+		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+		   -include $(srctree)/include/linux/hidden.h \
+		   -D__DISABLE_EXPORTS -ffreestanding -D__NO_FORTIFY \
+		   -fno-asynchronous-unwind-tables -fno-unwind-tables \
+		   $(call cc-option,-fno-addrsig)
+
+# remove SCS flags from all objects in this directory
+KBUILD_CFLAGS	:= $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
+# disable LTO
+KBUILD_CFLAGS	:= $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
+
+GCOV_PROFILE	:= n
+KASAN_SANITIZE	:= n
+KCSAN_SANITIZE	:= n
+UBSAN_SANITIZE	:= n
+KCOV_INSTRUMENT	:= n
+
+$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ \
+			       --remove-section=.note.gnu.property \
+			       --prefix-alloc-sections=.init
+$(obj)/%.pi.o: $(obj)/%.o FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
+	$(call if_changed_rule,cc_o_c)
+
+obj-y		:= kaslr_early.pi.o lib-fdt.pi.o lib-fdt_ro.pi.o
+extra-y		:= $(patsubst %.pi.o,%.o,$(obj-y))
diff --git a/arch/arm64/kernel/pi/kaslr_early.c b/arch/arm64/kernel/pi/kaslr_early.c
new file mode 100644
index 000000000..17bff6e39
--- /dev/null
+++ b/arch/arm64/kernel/pi/kaslr_early.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2022 Google LLC
+// Author: Ard Biesheuvel <ardb@google.com>
+
+// NOTE: code in this file runs *very* early, and is not permitted to use
+// global variables or anything that relies on absolute addressing.
+
+#include <linux/libfdt.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/sizes.h>
+#include <linux/string.h>
+
+#include <asm/archrandom.h>
+#include <asm/memory.h>
+
+/* taken from lib/string.c */
+static char *__strstr(const char *s1, const char *s2)
+{
+	size_t l1, l2;
+
+	l2 = strlen(s2);
+	if (!l2)
+		return (char *)s1;
+	l1 = strlen(s1);
+	while (l1 >= l2) {
+		l1--;
+		if (!memcmp(s1, s2, l2))
+			return (char *)s1;
+		s1++;
+	}
+	return NULL;
+}
+static bool cmdline_contains_nokaslr(const u8 *cmdline)
+{
+	const u8 *str;
+
+	str = __strstr(cmdline, "nokaslr");
+	return str == cmdline || (str > cmdline && *(str - 1) == ' ');
+}
+
+static bool is_kaslr_disabled_cmdline(void *fdt)
+{
+	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
+		int node;
+		const u8 *prop;
+
+		node = fdt_path_offset(fdt, "/chosen");
+		if (node < 0)
+			goto out;
+
+		prop = fdt_getprop(fdt, node, "bootargs", NULL);
+		if (!prop)
+			goto out;
+
+		if (cmdline_contains_nokaslr(prop))
+			return true;
+
+		if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+			goto out;
+
+		return false;
+	}
+out:
+	return cmdline_contains_nokaslr(CONFIG_CMDLINE);
+}
+
+static u64 get_kaslr_seed(void *fdt)
+{
+	int node, len;
+	fdt64_t *prop;
+	u64 ret;
+
+	node = fdt_path_offset(fdt, "/chosen");
+	if (node < 0)
+		return 0;
+
+	prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len);
+	if (!prop || len != sizeof(u64))
+		return 0;
+
+	ret = fdt64_to_cpu(*prop);
+	*prop = 0;
+	return ret;
+}
+
+asmlinkage u64 kaslr_early_init(void *fdt)
+{
+	u64 seed;
+
+	if (is_kaslr_disabled_cmdline(fdt))
+		return 0;
+
+	seed = get_kaslr_seed(fdt);
+	if (!seed) {
+		if (!__early_cpu_has_rndr() ||
+		    !__arm64_rndr((unsigned long *)&seed))
+			return 0;
+	}
+
+	/*
+	 * OK, so we are proceeding with KASLR enabled. Calculate a suitable
+	 * kernel image offset from the seed. Let's place the kernel in the
+	 * middle half of the VMALLOC area (VA_BITS_MIN - 2), and stay clear of
+	 * the lower and upper quarters to avoid colliding with other
+	 * allocations.
+	 */
+	return BIT(VA_BITS_MIN - 3) + (seed & GENMASK(VA_BITS_MIN - 3, 0));
+}
diff --git a/arch/arm64/kernel/pointer_auth.c b/arch/arm64/kernel/pointer_auth.c
new file mode 100644
index 000000000..2708b620b
--- /dev/null
+++ b/arch/arm64/kernel/pointer_auth.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/compat.h>
+#include <linux/errno.h>
+#include <linux/prctl.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <asm/cpufeature.h>
+#include <asm/pointer_auth.h>
+
+int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg)
+{
+	struct ptrauth_keys_user *keys = &tsk->thread.keys_user;
+	unsigned long addr_key_mask = PR_PAC_APIAKEY | PR_PAC_APIBKEY |
+				      PR_PAC_APDAKEY | PR_PAC_APDBKEY;
+	unsigned long key_mask = addr_key_mask | PR_PAC_APGAKEY;
+
+	if (!system_supports_address_auth() && !system_supports_generic_auth())
+		return -EINVAL;
+
+	if (is_compat_thread(task_thread_info(tsk)))
+		return -EINVAL;
+
+	if (!arg) {
+		ptrauth_keys_init_user(keys);
+		return 0;
+	}
+
+	if (arg & ~key_mask)
+		return -EINVAL;
+
+	if (((arg & addr_key_mask) && !system_supports_address_auth()) ||
+	    ((arg & PR_PAC_APGAKEY) && !system_supports_generic_auth()))
+		return -EINVAL;
+
+	if (arg & PR_PAC_APIAKEY)
+		get_random_bytes(&keys->apia, sizeof(keys->apia));
+	if (arg & PR_PAC_APIBKEY)
+		get_random_bytes(&keys->apib, sizeof(keys->apib));
+	if (arg & PR_PAC_APDAKEY)
+		get_random_bytes(&keys->apda, sizeof(keys->apda));
+	if (arg & PR_PAC_APDBKEY)
+		get_random_bytes(&keys->apdb, sizeof(keys->apdb));
+	if (arg & PR_PAC_APGAKEY)
+		get_random_bytes(&keys->apga, sizeof(keys->apga));
+	ptrauth_keys_install_user(keys);
+
+	return 0;
+}
+
+static u64 arg_to_enxx_mask(unsigned long arg)
+{
+	u64 sctlr_enxx_mask = 0;
+
+	WARN_ON(arg & ~PR_PAC_ENABLED_KEYS_MASK);
+	if (arg & PR_PAC_APIAKEY)
+		sctlr_enxx_mask |= SCTLR_ELx_ENIA;
+	if (arg & PR_PAC_APIBKEY)
+		sctlr_enxx_mask |= SCTLR_ELx_ENIB;
+	if (arg & PR_PAC_APDAKEY)
+		sctlr_enxx_mask |= SCTLR_ELx_ENDA;
+	if (arg & PR_PAC_APDBKEY)
+		sctlr_enxx_mask |= SCTLR_ELx_ENDB;
+	return sctlr_enxx_mask;
+}
+
+int ptrauth_set_enabled_keys(struct task_struct *tsk, unsigned long keys,
+			     unsigned long enabled)
+{
+	u64 sctlr;
+
+	if (!system_supports_address_auth())
+		return -EINVAL;
+
+	if (is_compat_thread(task_thread_info(tsk)))
+		return -EINVAL;
+
+	if ((keys & ~PR_PAC_ENABLED_KEYS_MASK) || (enabled & ~keys))
+		return -EINVAL;
+
+	preempt_disable();
+	sctlr = tsk->thread.sctlr_user;
+	sctlr &= ~arg_to_enxx_mask(keys);
+	sctlr |= arg_to_enxx_mask(enabled);
+	tsk->thread.sctlr_user = sctlr;
+	if (tsk == current)
+		update_sctlr_el1(sctlr);
+	preempt_enable();
+
+	return 0;
+}
+
+int ptrauth_get_enabled_keys(struct task_struct *tsk)
+{
+	int retval = 0;
+
+	if (!system_supports_address_auth())
+		return -EINVAL;
+
+	if (is_compat_thread(task_thread_info(tsk)))
+		return -EINVAL;
+
+	if (tsk->thread.sctlr_user & SCTLR_ELx_ENIA)
+		retval |= PR_PAC_APIAKEY;
+	if (tsk->thread.sctlr_user & SCTLR_ELx_ENIB)
+		retval |= PR_PAC_APIBKEY;
+	if (tsk->thread.sctlr_user & SCTLR_ELx_ENDA)
+		retval |= PR_PAC_APDAKEY;
+	if (tsk->thread.sctlr_user & SCTLR_ELx_ENDB)
+		retval |= PR_PAC_APDBKEY;
+
+	return retval;
+}
diff --git a/arch/arm64/kernel/probes/Makefile b/arch/arm64/kernel/probes/Makefile
new file mode 100644
index 000000000..8e4be92e2
--- /dev/null
+++ b/arch/arm64/kernel/probes/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o	\
+				   kprobes_trampoline.o		\
+				   simulate-insn.o
+obj-$(CONFIG_UPROBES)		+= uprobes.o decode-insn.o	\
+				   simulate-insn.o
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
new file mode 100644
index 000000000..968d5fffe
--- /dev/null
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/kernel/probes/decode-insn.c
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <asm/insn.h>
+#include <asm/sections.h>
+
+#include "decode-insn.h"
+#include "simulate-insn.h"
+
+static bool __kprobes aarch64_insn_is_steppable(u32 insn)
+{
+	/*
+	 * Branch instructions will write a new value into the PC which is
+	 * likely to be relative to the XOL address and therefore invalid.
+	 * Deliberate generation of an exception during stepping is also not
+	 * currently safe. Lastly, MSR instructions can do any number of nasty
+	 * things we can't handle during single-stepping.
+	 */
+	if (aarch64_insn_is_class_branch_sys(insn)) {
+		if (aarch64_insn_is_branch(insn) ||
+		    aarch64_insn_is_msr_imm(insn) ||
+		    aarch64_insn_is_msr_reg(insn) ||
+		    aarch64_insn_is_exception(insn) ||
+		    aarch64_insn_is_eret(insn) ||
+		    aarch64_insn_is_eret_auth(insn))
+			return false;
+
+		/*
+		 * The MRS instruction may not return a correct value when
+		 * executing in the single-stepping environment. We do make one
+		 * exception, for reading the DAIF bits.
+		 */
+		if (aarch64_insn_is_mrs(insn))
+			return aarch64_insn_extract_system_reg(insn)
+			     != AARCH64_INSN_SPCLREG_DAIF;
+
+		/*
+		 * The HINT instruction is steppable only if it is in whitelist
+		 * and the rest of other such instructions are blocked for
+		 * single stepping as they may cause exception or other
+		 * unintended behaviour.
+		 */
+		if (aarch64_insn_is_hint(insn))
+			return aarch64_insn_is_steppable_hint(insn);
+
+		return true;
+	}
+
+	/*
+	 * Instructions which load PC relative literals are not going to work
+	 * when executed from an XOL slot. Instructions doing an exclusive
+	 * load/store are not going to complete successfully when single-step
+	 * exception handling happens in the middle of the sequence.
+	 */
+	if (aarch64_insn_uses_literal(insn) ||
+	    aarch64_insn_is_exclusive(insn))
+		return false;
+
+	return true;
+}
+
+/* Return:
+ *   INSN_REJECTED     If instruction is one not allowed to kprobe,
+ *   INSN_GOOD         If instruction is supported and uses instruction slot,
+ *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ */
+enum probe_insn __kprobes
+arm_probe_decode_insn(probe_opcode_t insn, struct arch_probe_insn *api)
+{
+	/*
+	 * Instructions reading or modifying the PC won't work from the XOL
+	 * slot.
+	 */
+	if (aarch64_insn_is_steppable(insn))
+		return INSN_GOOD;
+
+	if (aarch64_insn_is_bcond(insn)) {
+		api->handler = simulate_b_cond;
+	} else if (aarch64_insn_is_cbz(insn) ||
+	    aarch64_insn_is_cbnz(insn)) {
+		api->handler = simulate_cbz_cbnz;
+	} else if (aarch64_insn_is_tbz(insn) ||
+	    aarch64_insn_is_tbnz(insn)) {
+		api->handler = simulate_tbz_tbnz;
+	} else if (aarch64_insn_is_adr_adrp(insn)) {
+		api->handler = simulate_adr_adrp;
+	} else if (aarch64_insn_is_b(insn) ||
+	    aarch64_insn_is_bl(insn)) {
+		api->handler = simulate_b_bl;
+	} else if (aarch64_insn_is_br(insn) ||
+	    aarch64_insn_is_blr(insn) ||
+	    aarch64_insn_is_ret(insn)) {
+		api->handler = simulate_br_blr_ret;
+	} else if (aarch64_insn_is_ldr_lit(insn)) {
+		api->handler = simulate_ldr_literal;
+	} else if (aarch64_insn_is_ldrsw_lit(insn)) {
+		api->handler = simulate_ldrsw_literal;
+	} else {
+		/*
+		 * Instruction cannot be stepped out-of-line and we don't
+		 * (yet) simulate it.
+		 */
+		return INSN_REJECTED;
+	}
+
+	return INSN_GOOD_NO_SLOT;
+}
+
+#ifdef CONFIG_KPROBES
+static bool __kprobes
+is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
+{
+	while (scan_start >= scan_end) {
+		/*
+		 * atomic region starts from exclusive load and ends with
+		 * exclusive store.
+		 */
+		if (aarch64_insn_is_store_ex(le32_to_cpu(*scan_start)))
+			return false;
+		else if (aarch64_insn_is_load_ex(le32_to_cpu(*scan_start)))
+			return true;
+		scan_start--;
+	}
+
+	return false;
+}
+
+enum probe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
+{
+	enum probe_insn decoded;
+	probe_opcode_t insn = le32_to_cpu(*addr);
+	probe_opcode_t *scan_end = NULL;
+	unsigned long size = 0, offset = 0;
+
+	/*
+	 * If there's a symbol defined in front of and near enough to
+	 * the probe address assume it is the entry point to this
+	 * code and use it to further limit how far back we search
+	 * when determining if we're in an atomic sequence. If we could
+	 * not find any symbol skip the atomic test altogether as we
+	 * could otherwise end up searching irrelevant text/literals.
+	 * KPROBES depends on KALLSYMS so this last case should never
+	 * happen.
+	 */
+	if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) {
+		if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t)))
+			scan_end = addr - (offset / sizeof(kprobe_opcode_t));
+		else
+			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
+	}
+	decoded = arm_probe_decode_insn(insn, &asi->api);
+
+	if (decoded != INSN_REJECTED && scan_end)
+		if (is_probed_address_atomic(addr - 1, scan_end))
+			return INSN_REJECTED;
+
+	return decoded;
+}
+#endif
diff --git a/arch/arm64/kernel/probes/decode-insn.h b/arch/arm64/kernel/probes/decode-insn.h
new file mode 100644
index 000000000..8b758c5a2
--- /dev/null
+++ b/arch/arm64/kernel/probes/decode-insn.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/kernel/probes/decode-insn.h
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ */
+
+#ifndef _ARM_KERNEL_KPROBES_ARM64_H
+#define _ARM_KERNEL_KPROBES_ARM64_H
+
+#include <asm/kprobes.h>
+
+/*
+ * ARM strongly recommends a limit of 128 bytes between LoadExcl and
+ * StoreExcl instructions in a single thread of execution. So keep the
+ * max atomic context size as 32.
+ */
+#define MAX_ATOMIC_CONTEXT_SIZE	(128 / sizeof(kprobe_opcode_t))
+
+enum probe_insn {
+	INSN_REJECTED,
+	INSN_GOOD_NO_SLOT,
+	INSN_GOOD,
+};
+
+#ifdef CONFIG_KPROBES
+enum probe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi);
+#endif
+enum probe_insn __kprobes
+arm_probe_decode_insn(probe_opcode_t insn, struct arch_probe_insn *asi);
+
+#endif /* _ARM_KERNEL_KPROBES_ARM64_H */
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
new file mode 100644
index 000000000..70b91a8c6
--- /dev/null
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/kernel/probes/kprobes.c
+ *
+ * Kprobes support for ARM64
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ * Author: Sandeepa Prabhu <sandeepa.prabhu@linaro.org>
+ */
+
+#define pr_fmt(fmt) "kprobes: " fmt
+
+#include <linux/extable.h>
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/sched/debug.h>
+#include <linux/set_memory.h>
+#include <linux/slab.h>
+#include <linux/stop_machine.h>
+#include <linux/stringify.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/irq.h>
+#include <asm/patching.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
+#include <asm/system_misc.h>
+#include <asm/traps.h>
+
+#include "decode-insn.h"
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static void __kprobes
+post_kprobe_handler(struct kprobe *, struct kprobe_ctlblk *, struct pt_regs *);
+
+static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
+{
+	kprobe_opcode_t *addr = p->ainsn.api.insn;
+
+	/*
+	 * Prepare insn slot, Mark Rutland points out it depends on a coupe of
+	 * subtleties:
+	 *
+	 * - That the I-cache maintenance for these instructions is complete
+	 *   *before* the kprobe BRK is written (and aarch64_insn_patch_text_nosync()
+	 *   ensures this, but just omits causing a Context-Synchronization-Event
+	 *   on all CPUS).
+	 *
+	 * - That the kprobe BRK results in an exception (and consequently a
+	 *   Context-Synchronoization-Event), which ensures that the CPU will
+	 *   fetch thesingle-step slot instructions *after* this, ensuring that
+	 *   the new instructions are used
+	 *
+	 * It supposes to place ISB after patching to guarantee I-cache maintenance
+	 * is observed on all CPUS, however, single-step slot is installed in
+	 * the BRK exception handler, so it is unnecessary to generate
+	 * Contex-Synchronization-Event via ISB again.
+	 */
+	aarch64_insn_patch_text_nosync(addr, p->opcode);
+	aarch64_insn_patch_text_nosync(addr + 1, BRK64_OPCODE_KPROBES_SS);
+
+	/*
+	 * Needs restoring of return address after stepping xol.
+	 */
+	p->ainsn.api.restore = (unsigned long) p->addr +
+	  sizeof(kprobe_opcode_t);
+}
+
+static void __kprobes arch_prepare_simulate(struct kprobe *p)
+{
+	/* This instructions is not executed xol. No need to adjust the PC */
+	p->ainsn.api.restore = 0;
+}
+
+static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	if (p->ainsn.api.handler)
+		p->ainsn.api.handler((u32)p->opcode, (long)p->addr, regs);
+
+	/* single step simulated, now go for post processing */
+	post_kprobe_handler(p, kcb, regs);
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	unsigned long probe_addr = (unsigned long)p->addr;
+
+	if (probe_addr & 0x3)
+		return -EINVAL;
+
+	/* copy instruction */
+	p->opcode = le32_to_cpu(*p->addr);
+
+	if (search_exception_tables(probe_addr))
+		return -EINVAL;
+
+	/* decode instruction */
+	switch (arm_kprobe_decode_insn(p->addr, &p->ainsn)) {
+	case INSN_REJECTED:	/* insn not supported */
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:	/* insn need simulation */
+		p->ainsn.api.insn = NULL;
+		break;
+
+	case INSN_GOOD:	/* instruction uses slot */
+		p->ainsn.api.insn = get_insn_slot();
+		if (!p->ainsn.api.insn)
+			return -ENOMEM;
+		break;
+	}
+
+	/* prepare the instruction */
+	if (p->ainsn.api.insn)
+		arch_prepare_ss_slot(p);
+	else
+		arch_prepare_simulate(p);
+
+	return 0;
+}
+
+void *alloc_insn_page(void)
+{
+	return __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START, VMALLOC_END,
+			GFP_KERNEL, PAGE_KERNEL_ROX, VM_FLUSH_RESET_PERMS,
+			NUMA_NO_NODE, __builtin_return_address(0));
+}
+
+/* arm kprobe: install breakpoint in text */
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+	void *addr = p->addr;
+	u32 insn = BRK64_OPCODE_KPROBES;
+
+	aarch64_insn_patch_text(&addr, &insn, 1);
+}
+
+/* disarm kprobe: remove breakpoint from text */
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+	void *addr = p->addr;
+
+	aarch64_insn_patch_text(&addr, &p->opcode, 1);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	if (p->ainsn.api.insn) {
+		free_insn_slot(p->ainsn.api.insn, 0);
+		p->ainsn.api.insn = NULL;
+	}
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	kcb->prev_kprobe.kp = kprobe_running();
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
+	kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+	__this_cpu_write(current_kprobe, p);
+}
+
+/*
+ * Mask all of DAIF while executing the instruction out-of-line, to keep things
+ * simple and avoid nesting exceptions. Interrupts do have to be disabled since
+ * the kprobe state is per-CPU and doesn't get migrated.
+ */
+static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	kcb->saved_irqflag = regs->pstate & DAIF_MASK;
+	regs->pstate |= DAIF_MASK;
+}
+
+static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb,
+						struct pt_regs *regs)
+{
+	regs->pstate &= ~DAIF_MASK;
+	regs->pstate |= kcb->saved_irqflag;
+}
+
+static void __kprobes setup_singlestep(struct kprobe *p,
+				       struct pt_regs *regs,
+				       struct kprobe_ctlblk *kcb, int reenter)
+{
+	unsigned long slot;
+
+	if (reenter) {
+		save_previous_kprobe(kcb);
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_REENTER;
+	} else {
+		kcb->kprobe_status = KPROBE_HIT_SS;
+	}
+
+
+	if (p->ainsn.api.insn) {
+		/* prepare for single stepping */
+		slot = (unsigned long)p->ainsn.api.insn;
+
+		kprobes_save_local_irqflag(kcb, regs);
+		instruction_pointer_set(regs, slot);
+	} else {
+		/* insn simulation */
+		arch_simulate_insn(p, regs);
+	}
+}
+
+static int __kprobes reenter_kprobe(struct kprobe *p,
+				    struct pt_regs *regs,
+				    struct kprobe_ctlblk *kcb)
+{
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SSDONE:
+	case KPROBE_HIT_ACTIVE:
+		kprobes_inc_nmissed_count(p);
+		setup_singlestep(p, regs, kcb, 1);
+		break;
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		pr_warn("Failed to recover from reentered kprobes.\n");
+		dump_kprobe(p);
+		BUG();
+		break;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __kprobes
+post_kprobe_handler(struct kprobe *cur, struct kprobe_ctlblk *kcb, struct pt_regs *regs)
+{
+	/* return addr restore if non-branching insn */
+	if (cur->ainsn.api.restore != 0)
+		instruction_pointer_set(regs, cur->ainsn.api.restore);
+
+	/* restore back original saved kprobe variables and continue */
+	if (kcb->kprobe_status == KPROBE_REENTER) {
+		restore_previous_kprobe(kcb);
+		return;
+	}
+	/* call post handler */
+	kcb->kprobe_status = KPROBE_HIT_SSDONE;
+	if (cur->post_handler)
+		cur->post_handler(cur, regs, 0);
+
+	reset_current_kprobe();
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
+{
+	struct kprobe *cur = kprobe_running();
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+		/*
+		 * We are here because the instruction being single
+		 * stepped caused a page fault. We reset the current
+		 * kprobe and the ip points back to the probe address
+		 * and allow the page fault handler to continue as a
+		 * normal page fault.
+		 */
+		instruction_pointer_set(regs, (unsigned long) cur->addr);
+		BUG_ON(!instruction_pointer(regs));
+
+		if (kcb->kprobe_status == KPROBE_REENTER) {
+			restore_previous_kprobe(kcb);
+		} else {
+			kprobes_restore_local_irqflag(kcb, regs);
+			reset_current_kprobe();
+		}
+
+		break;
+	}
+	return 0;
+}
+
+static int __kprobes
+kprobe_breakpoint_handler(struct pt_regs *regs, unsigned long esr)
+{
+	struct kprobe *p, *cur_kprobe;
+	struct kprobe_ctlblk *kcb;
+	unsigned long addr = instruction_pointer(regs);
+
+	kcb = get_kprobe_ctlblk();
+	cur_kprobe = kprobe_running();
+
+	p = get_kprobe((kprobe_opcode_t *) addr);
+	if (WARN_ON_ONCE(!p)) {
+		/*
+		 * Something went wrong. This BRK used an immediate reserved
+		 * for kprobes, but we couldn't find any corresponding probe.
+		 */
+		return DBG_HOOK_ERROR;
+	}
+
+	if (cur_kprobe) {
+		/* Hit a kprobe inside another kprobe */
+		if (!reenter_kprobe(p, regs, kcb))
+			return DBG_HOOK_ERROR;
+	} else {
+		/* Probe hit */
+		set_current_kprobe(p);
+		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+		/*
+		 * If we have no pre-handler or it returned 0, we
+		 * continue with normal processing.  If we have a
+		 * pre-handler and it returned non-zero, it will
+		 * modify the execution path and not need to single-step
+		 * Let's just reset current kprobe and exit.
+		 */
+		if (!p->pre_handler || !p->pre_handler(p, regs))
+			setup_singlestep(p, regs, kcb, 0);
+		else
+			reset_current_kprobe();
+	}
+
+	return DBG_HOOK_HANDLED;
+}
+
+static struct break_hook kprobes_break_hook = {
+	.imm = KPROBES_BRK_IMM,
+	.fn = kprobe_breakpoint_handler,
+};
+
+static int __kprobes
+kprobe_breakpoint_ss_handler(struct pt_regs *regs, unsigned long esr)
+{
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long addr = instruction_pointer(regs);
+	struct kprobe *cur = kprobe_running();
+
+	if (cur && (kcb->kprobe_status & (KPROBE_HIT_SS | KPROBE_REENTER)) &&
+	    ((unsigned long)&cur->ainsn.api.insn[1] == addr)) {
+		kprobes_restore_local_irqflag(kcb, regs);
+		post_kprobe_handler(cur, kcb, regs);
+
+		return DBG_HOOK_HANDLED;
+	}
+
+	/* not ours, kprobes should ignore it */
+	return DBG_HOOK_ERROR;
+}
+
+static struct break_hook kprobes_break_ss_hook = {
+	.imm = KPROBES_BRK_SS_IMM,
+	.fn = kprobe_breakpoint_ss_handler,
+};
+
+/*
+ * Provide a blacklist of symbols identifying ranges which cannot be kprobed.
+ * This blacklist is exposed to userspace via debugfs (kprobes/blacklist).
+ */
+int __init arch_populate_kprobe_blacklist(void)
+{
+	int ret;
+
+	ret = kprobe_add_area_blacklist((unsigned long)__entry_text_start,
+					(unsigned long)__entry_text_end);
+	if (ret)
+		return ret;
+	ret = kprobe_add_area_blacklist((unsigned long)__irqentry_text_start,
+					(unsigned long)__irqentry_text_end);
+	if (ret)
+		return ret;
+	ret = kprobe_add_area_blacklist((unsigned long)__hyp_text_start,
+					(unsigned long)__hyp_text_end);
+	if (ret || is_kernel_in_hyp_mode())
+		return ret;
+	ret = kprobe_add_area_blacklist((unsigned long)__hyp_idmap_text_start,
+					(unsigned long)__hyp_idmap_text_end);
+	return ret;
+}
+
+void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs)
+{
+	return (void *)kretprobe_trampoline_handler(regs, (void *)regs->regs[29]);
+}
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+				      struct pt_regs *regs)
+{
+	ri->ret_addr = (kprobe_opcode_t *)regs->regs[30];
+	ri->fp = (void *)regs->regs[29];
+
+	/* replace return addr (x30) with trampoline */
+	regs->regs[30] = (long)&__kretprobe_trampoline;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+	register_kernel_break_hook(&kprobes_break_hook);
+	register_kernel_break_hook(&kprobes_break_ss_hook);
+
+	return 0;
+}
diff --git a/arch/arm64/kernel/probes/kprobes_trampoline.S b/arch/arm64/kernel/probes/kprobes_trampoline.S
new file mode 100644
index 000000000..9a6499bed
--- /dev/null
+++ b/arch/arm64/kernel/probes/kprobes_trampoline.S
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * trampoline entry and return code for kretprobes.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+
+	.text
+
+	.macro	save_all_base_regs
+	stp x0, x1, [sp, #S_X0]
+	stp x2, x3, [sp, #S_X2]
+	stp x4, x5, [sp, #S_X4]
+	stp x6, x7, [sp, #S_X6]
+	stp x8, x9, [sp, #S_X8]
+	stp x10, x11, [sp, #S_X10]
+	stp x12, x13, [sp, #S_X12]
+	stp x14, x15, [sp, #S_X14]
+	stp x16, x17, [sp, #S_X16]
+	stp x18, x19, [sp, #S_X18]
+	stp x20, x21, [sp, #S_X20]
+	stp x22, x23, [sp, #S_X22]
+	stp x24, x25, [sp, #S_X24]
+	stp x26, x27, [sp, #S_X26]
+	stp x28, x29, [sp, #S_X28]
+	add x0, sp, #PT_REGS_SIZE
+	stp lr, x0, [sp, #S_LR]
+	/*
+	 * Construct a useful saved PSTATE
+	 */
+	mrs x0, nzcv
+	mrs x1, daif
+	orr x0, x0, x1
+	mrs x1, CurrentEL
+	orr x0, x0, x1
+	mrs x1, SPSel
+	orr x0, x0, x1
+	stp xzr, x0, [sp, #S_PC]
+	.endm
+
+	.macro	restore_all_base_regs
+	ldr x0, [sp, #S_PSTATE]
+	and x0, x0, #(PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT | PSR_V_BIT)
+	msr nzcv, x0
+	ldp x0, x1, [sp, #S_X0]
+	ldp x2, x3, [sp, #S_X2]
+	ldp x4, x5, [sp, #S_X4]
+	ldp x6, x7, [sp, #S_X6]
+	ldp x8, x9, [sp, #S_X8]
+	ldp x10, x11, [sp, #S_X10]
+	ldp x12, x13, [sp, #S_X12]
+	ldp x14, x15, [sp, #S_X14]
+	ldp x16, x17, [sp, #S_X16]
+	ldp x18, x19, [sp, #S_X18]
+	ldp x20, x21, [sp, #S_X20]
+	ldp x22, x23, [sp, #S_X22]
+	ldp x24, x25, [sp, #S_X24]
+	ldp x26, x27, [sp, #S_X26]
+	ldp x28, x29, [sp, #S_X28]
+	.endm
+
+SYM_CODE_START(__kretprobe_trampoline)
+	sub sp, sp, #PT_REGS_SIZE
+
+	save_all_base_regs
+
+	/* Setup a frame pointer. */
+	add x29, sp, #S_FP
+
+	mov x0, sp
+	bl trampoline_probe_handler
+	/*
+	 * Replace trampoline address in lr with actual orig_ret_addr return
+	 * address.
+	 */
+	mov lr, x0
+
+	/* The frame pointer (x29) is restored with other registers. */
+	restore_all_base_regs
+
+	add sp, sp, #PT_REGS_SIZE
+	ret
+
+SYM_CODE_END(__kretprobe_trampoline)
diff --git a/arch/arm64/kernel/probes/simulate-insn.c b/arch/arm64/kernel/probes/simulate-insn.c
new file mode 100644
index 000000000..22d0b3252
--- /dev/null
+++ b/arch/arm64/kernel/probes/simulate-insn.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/kernel/probes/simulate-insn.c
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#include <asm/ptrace.h>
+#include <asm/traps.h>
+
+#include "simulate-insn.h"
+
+#define bbl_displacement(insn)		\
+	sign_extend32(((insn) & 0x3ffffff) << 2, 27)
+
+#define bcond_displacement(insn)	\
+	sign_extend32(((insn >> 5) & 0x7ffff) << 2, 20)
+
+#define cbz_displacement(insn)	\
+	sign_extend32(((insn >> 5) & 0x7ffff) << 2, 20)
+
+#define tbz_displacement(insn)	\
+	sign_extend32(((insn >> 5) & 0x3fff) << 2, 15)
+
+#define ldr_displacement(insn)	\
+	sign_extend32(((insn >> 5) & 0x7ffff) << 2, 20)
+
+static inline void set_x_reg(struct pt_regs *regs, int reg, u64 val)
+{
+	pt_regs_write_reg(regs, reg, val);
+}
+
+static inline void set_w_reg(struct pt_regs *regs, int reg, u64 val)
+{
+	pt_regs_write_reg(regs, reg, lower_32_bits(val));
+}
+
+static inline u64 get_x_reg(struct pt_regs *regs, int reg)
+{
+	return pt_regs_read_reg(regs, reg);
+}
+
+static inline u32 get_w_reg(struct pt_regs *regs, int reg)
+{
+	return lower_32_bits(pt_regs_read_reg(regs, reg));
+}
+
+static bool __kprobes check_cbz(u32 opcode, struct pt_regs *regs)
+{
+	int xn = opcode & 0x1f;
+
+	return (opcode & (1 << 31)) ?
+	    (get_x_reg(regs, xn) == 0) : (get_w_reg(regs, xn) == 0);
+}
+
+static bool __kprobes check_cbnz(u32 opcode, struct pt_regs *regs)
+{
+	int xn = opcode & 0x1f;
+
+	return (opcode & (1 << 31)) ?
+	    (get_x_reg(regs, xn) != 0) : (get_w_reg(regs, xn) != 0);
+}
+
+static bool __kprobes check_tbz(u32 opcode, struct pt_regs *regs)
+{
+	int xn = opcode & 0x1f;
+	int bit_pos = ((opcode & (1 << 31)) >> 26) | ((opcode >> 19) & 0x1f);
+
+	return ((get_x_reg(regs, xn) >> bit_pos) & 0x1) == 0;
+}
+
+static bool __kprobes check_tbnz(u32 opcode, struct pt_regs *regs)
+{
+	int xn = opcode & 0x1f;
+	int bit_pos = ((opcode & (1 << 31)) >> 26) | ((opcode >> 19) & 0x1f);
+
+	return ((get_x_reg(regs, xn) >> bit_pos) & 0x1) != 0;
+}
+
+/*
+ * instruction simulation functions
+ */
+void __kprobes
+simulate_adr_adrp(u32 opcode, long addr, struct pt_regs *regs)
+{
+	long imm, xn, val;
+
+	xn = opcode & 0x1f;
+	imm = ((opcode >> 3) & 0x1ffffc) | ((opcode >> 29) & 0x3);
+	imm = sign_extend64(imm, 20);
+	if (opcode & 0x80000000)
+		val = (imm<<12) + (addr & 0xfffffffffffff000);
+	else
+		val = imm + addr;
+
+	set_x_reg(regs, xn, val);
+
+	instruction_pointer_set(regs, instruction_pointer(regs) + 4);
+}
+
+void __kprobes
+simulate_b_bl(u32 opcode, long addr, struct pt_regs *regs)
+{
+	int disp = bbl_displacement(opcode);
+
+	/* Link register is x30 */
+	if (opcode & (1 << 31))
+		set_x_reg(regs, 30, addr + 4);
+
+	instruction_pointer_set(regs, addr + disp);
+}
+
+void __kprobes
+simulate_b_cond(u32 opcode, long addr, struct pt_regs *regs)
+{
+	int disp = 4;
+
+	if (aarch32_opcode_cond_checks[opcode & 0xf](regs->pstate & 0xffffffff))
+		disp = bcond_displacement(opcode);
+
+	instruction_pointer_set(regs, addr + disp);
+}
+
+void __kprobes
+simulate_br_blr_ret(u32 opcode, long addr, struct pt_regs *regs)
+{
+	int xn = (opcode >> 5) & 0x1f;
+
+	/* update pc first in case we're doing a "blr lr" */
+	instruction_pointer_set(regs, get_x_reg(regs, xn));
+
+	/* Link register is x30 */
+	if (((opcode >> 21) & 0x3) == 1)
+		set_x_reg(regs, 30, addr + 4);
+}
+
+void __kprobes
+simulate_cbz_cbnz(u32 opcode, long addr, struct pt_regs *regs)
+{
+	int disp = 4;
+
+	if (opcode & (1 << 24)) {
+		if (check_cbnz(opcode, regs))
+			disp = cbz_displacement(opcode);
+	} else {
+		if (check_cbz(opcode, regs))
+			disp = cbz_displacement(opcode);
+	}
+	instruction_pointer_set(regs, addr + disp);
+}
+
+void __kprobes
+simulate_tbz_tbnz(u32 opcode, long addr, struct pt_regs *regs)
+{
+	int disp = 4;
+
+	if (opcode & (1 << 24)) {
+		if (check_tbnz(opcode, regs))
+			disp = tbz_displacement(opcode);
+	} else {
+		if (check_tbz(opcode, regs))
+			disp = tbz_displacement(opcode);
+	}
+	instruction_pointer_set(regs, addr + disp);
+}
+
+void __kprobes
+simulate_ldr_literal(u32 opcode, long addr, struct pt_regs *regs)
+{
+	u64 *load_addr;
+	int xn = opcode & 0x1f;
+	int disp;
+
+	disp = ldr_displacement(opcode);
+	load_addr = (u64 *) (addr + disp);
+
+	if (opcode & (1 << 30))	/* x0-x30 */
+		set_x_reg(regs, xn, *load_addr);
+	else			/* w0-w30 */
+		set_w_reg(regs, xn, *load_addr);
+
+	instruction_pointer_set(regs, instruction_pointer(regs) + 4);
+}
+
+void __kprobes
+simulate_ldrsw_literal(u32 opcode, long addr, struct pt_regs *regs)
+{
+	s32 *load_addr;
+	int xn = opcode & 0x1f;
+	int disp;
+
+	disp = ldr_displacement(opcode);
+	load_addr = (s32 *) (addr + disp);
+
+	set_x_reg(regs, xn, *load_addr);
+
+	instruction_pointer_set(regs, instruction_pointer(regs) + 4);
+}
diff --git a/arch/arm64/kernel/probes/simulate-insn.h b/arch/arm64/kernel/probes/simulate-insn.h
new file mode 100644
index 000000000..e065dc922
--- /dev/null
+++ b/arch/arm64/kernel/probes/simulate-insn.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm64/kernel/probes/simulate-insn.h
+ *
+ * Copyright (C) 2013 Linaro Limited
+ */
+
+#ifndef _ARM_KERNEL_KPROBES_SIMULATE_INSN_H
+#define _ARM_KERNEL_KPROBES_SIMULATE_INSN_H
+
+void simulate_adr_adrp(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_b_bl(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_b_cond(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_br_blr_ret(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_cbz_cbnz(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_tbz_tbnz(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_ldr_literal(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_ldrsw_literal(u32 opcode, long addr, struct pt_regs *regs);
+
+#endif /* _ARM_KERNEL_KPROBES_SIMULATE_INSN_H */
diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c
new file mode 100644
index 000000000..d49aef265
--- /dev/null
+++ b/arch/arm64/kernel/probes/uprobes.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Pratyush Anand <panand@redhat.com>
+ */
+#include <linux/highmem.h>
+#include <linux/ptrace.h>
+#include <linux/uprobes.h>
+#include <asm/cacheflush.h>
+
+#include "decode-insn.h"
+
+#define UPROBE_INV_FAULT_CODE	UINT_MAX
+
+void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
+		void *src, unsigned long len)
+{
+	void *xol_page_kaddr = kmap_atomic(page);
+	void *dst = xol_page_kaddr + (vaddr & ~PAGE_MASK);
+
+	/* Initialize the slot */
+	memcpy(dst, src, len);
+
+	/* flush caches (dcache/icache) */
+	sync_icache_aliases((unsigned long)dst, (unsigned long)dst + len);
+
+	kunmap_atomic(xol_page_kaddr);
+}
+
+unsigned long uprobe_get_swbp_addr(struct pt_regs *regs)
+{
+	return instruction_pointer(regs);
+}
+
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
+		unsigned long addr)
+{
+	probe_opcode_t insn;
+
+	/* TODO: Currently we do not support AARCH32 instruction probing */
+	if (mm->context.flags & MMCF_AARCH32)
+		return -EOPNOTSUPP;
+	else if (!IS_ALIGNED(addr, AARCH64_INSN_SIZE))
+		return -EINVAL;
+
+	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+
+	switch (arm_probe_decode_insn(insn, &auprobe->api)) {
+	case INSN_REJECTED:
+		return -EINVAL;
+
+	case INSN_GOOD_NO_SLOT:
+		auprobe->simulate = true;
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	/* Initialize with an invalid fault code to detect if ol insn trapped */
+	current->thread.fault_code = UPROBE_INV_FAULT_CODE;
+
+	/* Instruction points to execute ol */
+	instruction_pointer_set(regs, utask->xol_vaddr);
+
+	user_enable_single_step(current);
+
+	return 0;
+}
+
+int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	WARN_ON_ONCE(current->thread.fault_code != UPROBE_INV_FAULT_CODE);
+
+	/* Instruction points to execute next to breakpoint address */
+	instruction_pointer_set(regs, utask->vaddr + 4);
+
+	user_disable_single_step(current);
+
+	return 0;
+}
+bool arch_uprobe_xol_was_trapped(struct task_struct *t)
+{
+	/*
+	 * Between arch_uprobe_pre_xol and arch_uprobe_post_xol, if an xol
+	 * insn itself is trapped, then detect the case with the help of
+	 * invalid fault code which is being set in arch_uprobe_pre_xol
+	 */
+	if (t->thread.fault_code != UPROBE_INV_FAULT_CODE)
+		return true;
+
+	return false;
+}
+
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	probe_opcode_t insn;
+	unsigned long addr;
+
+	if (!auprobe->simulate)
+		return false;
+
+	insn = *(probe_opcode_t *)(&auprobe->insn[0]);
+	addr = instruction_pointer(regs);
+
+	if (auprobe->api.handler)
+		auprobe->api.handler(insn, addr, regs);
+
+	return true;
+}
+
+void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	/*
+	 * Task has received a fatal signal, so reset back to probbed
+	 * address.
+	 */
+	instruction_pointer_set(regs, utask->vaddr);
+
+	user_disable_single_step(current);
+}
+
+bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
+		struct pt_regs *regs)
+{
+	/*
+	 * If a simple branch instruction (B) was called for retprobed
+	 * assembly label then return true even when regs->sp and ret->stack
+	 * are same. It will ensure that cleanup and reporting of return
+	 * instances corresponding to callee label is done when
+	 * handle_trampoline for called function is executed.
+	 */
+	if (ctx == RP_CHECK_CHAIN_CALL)
+		return regs->sp <= ret->stack;
+	else
+		return regs->sp < ret->stack;
+}
+
+unsigned long
+arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
+				  struct pt_regs *regs)
+{
+	unsigned long orig_ret_vaddr;
+
+	orig_ret_vaddr = procedure_link_pointer(regs);
+	/* Replace the return addr with trampoline addr */
+	procedure_link_pointer_set(regs, trampoline_vaddr);
+
+	return orig_ret_vaddr;
+}
+
+int arch_uprobe_exception_notify(struct notifier_block *self,
+				 unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
+
+static int uprobe_breakpoint_handler(struct pt_regs *regs,
+				     unsigned long esr)
+{
+	if (uprobe_pre_sstep_notifier(regs))
+		return DBG_HOOK_HANDLED;
+
+	return DBG_HOOK_ERROR;
+}
+
+static int uprobe_single_step_handler(struct pt_regs *regs,
+				      unsigned long esr)
+{
+	struct uprobe_task *utask = current->utask;
+
+	WARN_ON(utask && (instruction_pointer(regs) != utask->xol_vaddr + 4));
+	if (uprobe_post_sstep_notifier(regs))
+		return DBG_HOOK_HANDLED;
+
+	return DBG_HOOK_ERROR;
+}
+
+/* uprobe breakpoint handler hook */
+static struct break_hook uprobes_break_hook = {
+	.imm = UPROBES_BRK_IMM,
+	.fn = uprobe_breakpoint_handler,
+};
+
+/* uprobe single step handler hook */
+static struct step_hook uprobes_step_hook = {
+	.fn = uprobe_single_step_handler,
+};
+
+static int __init arch_init_uprobes(void)
+{
+	register_user_break_hook(&uprobes_break_hook);
+	register_user_step_hook(&uprobes_step_hook);
+
+	return 0;
+}
+
+device_initcall(arch_init_uprobes);
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
new file mode 100644
index 000000000..0fcc4eb1a
--- /dev/null
+++ b/arch/arm64/kernel/process.c
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/process.c
+ *
+ * Original Copyright (C) 1995  Linus Torvalds
+ * Copyright (C) 1996-2000 Russell King - Converted to ARM.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#include <linux/compat.h>
+#include <linux/efi.h>
+#include <linux/elf.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/kernel.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/nospec.h>
+#include <linux/stddef.h>
+#include <linux/sysctl.h>
+#include <linux/unistd.h>
+#include <linux/user.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/elfcore.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/utsname.h>
+#include <linux/uaccess.h>
+#include <linux/random.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/personality.h>
+#include <linux/notifier.h>
+#include <trace/events/power.h>
+#include <linux/percpu.h>
+#include <linux/thread_info.h>
+#include <linux/prctl.h>
+#include <linux/stacktrace.h>
+
+#include <asm/alternative.h>
+#include <asm/compat.h>
+#include <asm/cpufeature.h>
+#include <asm/cacheflush.h>
+#include <asm/exec.h>
+#include <asm/fpsimd.h>
+#include <asm/mmu_context.h>
+#include <asm/mte.h>
+#include <asm/processor.h>
+#include <asm/pointer_auth.h>
+#include <asm/stacktrace.h>
+#include <asm/switch_to.h>
+#include <asm/system_misc.h>
+
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_STACKPROTECTOR_PER_TASK)
+#include <linux/stackprotector.h>
+unsigned long __stack_chk_guard __ro_after_init;
+EXPORT_SYMBOL(__stack_chk_guard);
+#endif
+
+/*
+ * Function pointers to optional machine specific functions
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL_GPL(pm_power_off);
+
+#ifdef CONFIG_HOTPLUG_CPU
+void __noreturn arch_cpu_idle_dead(void)
+{
+       cpu_die();
+}
+#endif
+
+/*
+ * Called by kexec, immediately prior to machine_kexec().
+ *
+ * This must completely disable all secondary CPUs; simply causing those CPUs
+ * to execute e.g. a RAM-based pin loop is not sufficient. This allows the
+ * kexec'd kernel to use any and all RAM as it sees fit, without having to
+ * avoid any code or data used by any SW CPU pin loop. The CPU hotplug
+ * functionality embodied in smpt_shutdown_nonboot_cpus() to achieve this.
+ */
+void machine_shutdown(void)
+{
+	smp_shutdown_nonboot_cpus(reboot_cpu);
+}
+
+/*
+ * Halting simply requires that the secondary CPUs stop performing any
+ * activity (executing tasks, handling interrupts). smp_send_stop()
+ * achieves this.
+ */
+void machine_halt(void)
+{
+	local_irq_disable();
+	smp_send_stop();
+	while (1);
+}
+
+/*
+ * Power-off simply requires that the secondary CPUs stop performing any
+ * activity (executing tasks, handling interrupts). smp_send_stop()
+ * achieves this. When the system power is turned off, it will take all CPUs
+ * with it.
+ */
+void machine_power_off(void)
+{
+	local_irq_disable();
+	smp_send_stop();
+	do_kernel_power_off();
+}
+
+/*
+ * Restart requires that the secondary CPUs stop performing any activity
+ * while the primary CPU resets the system. Systems with multiple CPUs must
+ * provide a HW restart implementation, to ensure that all CPUs reset at once.
+ * This is required so that any code running after reset on the primary CPU
+ * doesn't have to co-ordinate with other CPUs to ensure they aren't still
+ * executing pre-reset code, and using RAM that the primary CPU's code wishes
+ * to use. Implementing such co-ordination would be essentially impossible.
+ */
+void machine_restart(char *cmd)
+{
+	/* Disable interrupts first */
+	local_irq_disable();
+	smp_send_stop();
+
+	/*
+	 * UpdateCapsule() depends on the system being reset via
+	 * ResetSystem().
+	 */
+	if (efi_enabled(EFI_RUNTIME_SERVICES))
+		efi_reboot(reboot_mode, NULL);
+
+	/* Now call the architecture specific reboot code. */
+	do_kernel_restart(cmd);
+
+	/*
+	 * Whoops - the architecture was unable to reboot.
+	 */
+	printk("Reboot failed -- System halted\n");
+	while (1);
+}
+
+#define bstr(suffix, str) [PSR_BTYPE_ ## suffix >> PSR_BTYPE_SHIFT] = str
+static const char *const btypes[] = {
+	bstr(NONE, "--"),
+	bstr(  JC, "jc"),
+	bstr(   C, "-c"),
+	bstr(  J , "j-")
+};
+#undef bstr
+
+static void print_pstate(struct pt_regs *regs)
+{
+	u64 pstate = regs->pstate;
+
+	if (compat_user_mode(regs)) {
+		printk("pstate: %08llx (%c%c%c%c %c %s %s %c%c%c %cDIT %cSSBS)\n",
+			pstate,
+			pstate & PSR_AA32_N_BIT ? 'N' : 'n',
+			pstate & PSR_AA32_Z_BIT ? 'Z' : 'z',
+			pstate & PSR_AA32_C_BIT ? 'C' : 'c',
+			pstate & PSR_AA32_V_BIT ? 'V' : 'v',
+			pstate & PSR_AA32_Q_BIT ? 'Q' : 'q',
+			pstate & PSR_AA32_T_BIT ? "T32" : "A32",
+			pstate & PSR_AA32_E_BIT ? "BE" : "LE",
+			pstate & PSR_AA32_A_BIT ? 'A' : 'a',
+			pstate & PSR_AA32_I_BIT ? 'I' : 'i',
+			pstate & PSR_AA32_F_BIT ? 'F' : 'f',
+			pstate & PSR_AA32_DIT_BIT ? '+' : '-',
+			pstate & PSR_AA32_SSBS_BIT ? '+' : '-');
+	} else {
+		const char *btype_str = btypes[(pstate & PSR_BTYPE_MASK) >>
+					       PSR_BTYPE_SHIFT];
+
+		printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO %cTCO %cDIT %cSSBS BTYPE=%s)\n",
+			pstate,
+			pstate & PSR_N_BIT ? 'N' : 'n',
+			pstate & PSR_Z_BIT ? 'Z' : 'z',
+			pstate & PSR_C_BIT ? 'C' : 'c',
+			pstate & PSR_V_BIT ? 'V' : 'v',
+			pstate & PSR_D_BIT ? 'D' : 'd',
+			pstate & PSR_A_BIT ? 'A' : 'a',
+			pstate & PSR_I_BIT ? 'I' : 'i',
+			pstate & PSR_F_BIT ? 'F' : 'f',
+			pstate & PSR_PAN_BIT ? '+' : '-',
+			pstate & PSR_UAO_BIT ? '+' : '-',
+			pstate & PSR_TCO_BIT ? '+' : '-',
+			pstate & PSR_DIT_BIT ? '+' : '-',
+			pstate & PSR_SSBS_BIT ? '+' : '-',
+			btype_str);
+	}
+}
+
+void __show_regs(struct pt_regs *regs)
+{
+	int i, top_reg;
+	u64 lr, sp;
+
+	if (compat_user_mode(regs)) {
+		lr = regs->compat_lr;
+		sp = regs->compat_sp;
+		top_reg = 12;
+	} else {
+		lr = regs->regs[30];
+		sp = regs->sp;
+		top_reg = 29;
+	}
+
+	show_regs_print_info(KERN_DEFAULT);
+	print_pstate(regs);
+
+	if (!user_mode(regs)) {
+		printk("pc : %pS\n", (void *)regs->pc);
+		printk("lr : %pS\n", (void *)ptrauth_strip_kernel_insn_pac(lr));
+	} else {
+		printk("pc : %016llx\n", regs->pc);
+		printk("lr : %016llx\n", lr);
+	}
+
+	printk("sp : %016llx\n", sp);
+
+	if (system_uses_irq_prio_masking())
+		printk("pmr_save: %08llx\n", regs->pmr_save);
+
+	i = top_reg;
+
+	while (i >= 0) {
+		printk("x%-2d: %016llx", i, regs->regs[i]);
+
+		while (i-- % 3)
+			pr_cont(" x%-2d: %016llx", i, regs->regs[i]);
+
+		pr_cont("\n");
+	}
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	__show_regs(regs);
+	dump_backtrace(regs, NULL, KERN_DEFAULT);
+}
+
+static void tls_thread_flush(void)
+{
+	write_sysreg(0, tpidr_el0);
+	if (system_supports_tpidr2())
+		write_sysreg_s(0, SYS_TPIDR2_EL0);
+
+	if (is_compat_task()) {
+		current->thread.uw.tp_value = 0;
+
+		/*
+		 * We need to ensure ordering between the shadow state and the
+		 * hardware state, so that we don't corrupt the hardware state
+		 * with a stale shadow state during context switch.
+		 */
+		barrier();
+		write_sysreg(0, tpidrro_el0);
+	}
+}
+
+static void flush_tagged_addr_state(void)
+{
+	if (IS_ENABLED(CONFIG_ARM64_TAGGED_ADDR_ABI))
+		clear_thread_flag(TIF_TAGGED_ADDR);
+}
+
+void flush_thread(void)
+{
+	fpsimd_flush_thread();
+	tls_thread_flush();
+	flush_ptrace_hw_breakpoint(current);
+	flush_tagged_addr_state();
+}
+
+void arch_release_task_struct(struct task_struct *tsk)
+{
+	fpsimd_release_task(tsk);
+}
+
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+	if (current->mm)
+		fpsimd_preserve_current_state();
+	*dst = *src;
+
+	/* We rely on the above assignment to initialize dst's thread_flags: */
+	BUILD_BUG_ON(!IS_ENABLED(CONFIG_THREAD_INFO_IN_TASK));
+
+	/*
+	 * Detach src's sve_state (if any) from dst so that it does not
+	 * get erroneously used or freed prematurely.  dst's copies
+	 * will be allocated on demand later on if dst uses SVE.
+	 * For consistency, also clear TIF_SVE here: this could be done
+	 * later in copy_process(), but to avoid tripping up future
+	 * maintainers it is best not to leave TIF flags and buffers in
+	 * an inconsistent state, even temporarily.
+	 */
+	dst->thread.sve_state = NULL;
+	clear_tsk_thread_flag(dst, TIF_SVE);
+
+	/*
+	 * In the unlikely event that we create a new thread with ZA
+	 * enabled we should retain the ZA and ZT state so duplicate
+	 * it here.  This may be shortly freed if we exec() or if
+	 * CLONE_SETTLS but it's simpler to do it here. To avoid
+	 * confusing the rest of the code ensure that we have a
+	 * sve_state allocated whenever sme_state is allocated.
+	 */
+	if (thread_za_enabled(&src->thread)) {
+		dst->thread.sve_state = kzalloc(sve_state_size(src),
+						GFP_KERNEL);
+		if (!dst->thread.sve_state)
+			return -ENOMEM;
+
+		dst->thread.sme_state = kmemdup(src->thread.sme_state,
+						sme_state_size(src),
+						GFP_KERNEL);
+		if (!dst->thread.sme_state) {
+			kfree(dst->thread.sve_state);
+			dst->thread.sve_state = NULL;
+			return -ENOMEM;
+		}
+	} else {
+		dst->thread.sme_state = NULL;
+		clear_tsk_thread_flag(dst, TIF_SME);
+	}
+
+	dst->thread.fp_type = FP_STATE_FPSIMD;
+
+	/* clear any pending asynchronous tag fault raised by the parent */
+	clear_tsk_thread_flag(dst, TIF_MTE_ASYNC_FAULT);
+
+	return 0;
+}
+
+asmlinkage void ret_from_fork(void) asm("ret_from_fork");
+
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
+{
+	unsigned long clone_flags = args->flags;
+	unsigned long stack_start = args->stack;
+	unsigned long tls = args->tls;
+	struct pt_regs *childregs = task_pt_regs(p);
+
+	memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
+
+	/*
+	 * In case p was allocated the same task_struct pointer as some
+	 * other recently-exited task, make sure p is disassociated from
+	 * any cpu that may have run that now-exited task recently.
+	 * Otherwise we could erroneously skip reloading the FPSIMD
+	 * registers for p.
+	 */
+	fpsimd_flush_task_state(p);
+
+	ptrauth_thread_init_kernel(p);
+
+	if (likely(!args->fn)) {
+		*childregs = *current_pt_regs();
+		childregs->regs[0] = 0;
+
+		/*
+		 * Read the current TLS pointer from tpidr_el0 as it may be
+		 * out-of-sync with the saved value.
+		 */
+		*task_user_tls(p) = read_sysreg(tpidr_el0);
+		if (system_supports_tpidr2())
+			p->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
+
+		if (stack_start) {
+			if (is_compat_thread(task_thread_info(p)))
+				childregs->compat_sp = stack_start;
+			else
+				childregs->sp = stack_start;
+		}
+
+		/*
+		 * If a TLS pointer was passed to clone, use it for the new
+		 * thread.  We also reset TPIDR2 if it's in use.
+		 */
+		if (clone_flags & CLONE_SETTLS) {
+			p->thread.uw.tp_value = tls;
+			p->thread.tpidr2_el0 = 0;
+		}
+	} else {
+		/*
+		 * A kthread has no context to ERET to, so ensure any buggy
+		 * ERET is treated as an illegal exception return.
+		 *
+		 * When a user task is created from a kthread, childregs will
+		 * be initialized by start_thread() or start_compat_thread().
+		 */
+		memset(childregs, 0, sizeof(struct pt_regs));
+		childregs->pstate = PSR_MODE_EL1h | PSR_IL_BIT;
+
+		p->thread.cpu_context.x19 = (unsigned long)args->fn;
+		p->thread.cpu_context.x20 = (unsigned long)args->fn_arg;
+	}
+	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
+	p->thread.cpu_context.sp = (unsigned long)childregs;
+	/*
+	 * For the benefit of the unwinder, set up childregs->stackframe
+	 * as the final frame for the new task.
+	 */
+	p->thread.cpu_context.fp = (unsigned long)childregs->stackframe;
+
+	ptrace_hw_copy_thread(p);
+
+	return 0;
+}
+
+void tls_preserve_current_state(void)
+{
+	*task_user_tls(current) = read_sysreg(tpidr_el0);
+	if (system_supports_tpidr2() && !is_compat_task())
+		current->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
+}
+
+static void tls_thread_switch(struct task_struct *next)
+{
+	tls_preserve_current_state();
+
+	if (is_compat_thread(task_thread_info(next)))
+		write_sysreg(next->thread.uw.tp_value, tpidrro_el0);
+	else if (!arm64_kernel_unmapped_at_el0())
+		write_sysreg(0, tpidrro_el0);
+
+	write_sysreg(*task_user_tls(next), tpidr_el0);
+	if (system_supports_tpidr2())
+		write_sysreg_s(next->thread.tpidr2_el0, SYS_TPIDR2_EL0);
+}
+
+/*
+ * Force SSBS state on context-switch, since it may be lost after migrating
+ * from a CPU which treats the bit as RES0 in a heterogeneous system.
+ */
+static void ssbs_thread_switch(struct task_struct *next)
+{
+	/*
+	 * Nothing to do for kernel threads, but 'regs' may be junk
+	 * (e.g. idle task) so check the flags and bail early.
+	 */
+	if (unlikely(next->flags & PF_KTHREAD))
+		return;
+
+	/*
+	 * If all CPUs implement the SSBS extension, then we just need to
+	 * context-switch the PSTATE field.
+	 */
+	if (cpus_have_const_cap(ARM64_SSBS))
+		return;
+
+	spectre_v4_enable_task_mitigation(next);
+}
+
+/*
+ * We store our current task in sp_el0, which is clobbered by userspace. Keep a
+ * shadow copy so that we can restore this upon entry from userspace.
+ *
+ * This is *only* for exception entry from EL0, and is not valid until we
+ * __switch_to() a user task.
+ */
+DEFINE_PER_CPU(struct task_struct *, __entry_task);
+
+static void entry_task_switch(struct task_struct *next)
+{
+	__this_cpu_write(__entry_task, next);
+}
+
+/*
+ * ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT.
+ * Ensure access is disabled when switching to a 32bit task, ensure
+ * access is enabled when switching to a 64bit task.
+ */
+static void erratum_1418040_thread_switch(struct task_struct *next)
+{
+	if (!IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) ||
+	    !this_cpu_has_cap(ARM64_WORKAROUND_1418040))
+		return;
+
+	if (is_compat_thread(task_thread_info(next)))
+		sysreg_clear_set(cntkctl_el1, ARCH_TIMER_USR_VCT_ACCESS_EN, 0);
+	else
+		sysreg_clear_set(cntkctl_el1, 0, ARCH_TIMER_USR_VCT_ACCESS_EN);
+}
+
+static void erratum_1418040_new_exec(void)
+{
+	preempt_disable();
+	erratum_1418040_thread_switch(current);
+	preempt_enable();
+}
+
+/*
+ * __switch_to() checks current->thread.sctlr_user as an optimisation. Therefore
+ * this function must be called with preemption disabled and the update to
+ * sctlr_user must be made in the same preemption disabled block so that
+ * __switch_to() does not see the variable update before the SCTLR_EL1 one.
+ */
+void update_sctlr_el1(u64 sctlr)
+{
+	/*
+	 * EnIA must not be cleared while in the kernel as this is necessary for
+	 * in-kernel PAC. It will be cleared on kernel exit if needed.
+	 */
+	sysreg_clear_set(sctlr_el1, SCTLR_USER_MASK & ~SCTLR_ELx_ENIA, sctlr);
+
+	/* ISB required for the kernel uaccess routines when setting TCF0. */
+	isb();
+}
+
+/*
+ * Thread switching.
+ */
+__notrace_funcgraph __sched
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next)
+{
+	struct task_struct *last;
+
+	fpsimd_thread_switch(next);
+	tls_thread_switch(next);
+	hw_breakpoint_thread_switch(next);
+	contextidr_thread_switch(next);
+	entry_task_switch(next);
+	ssbs_thread_switch(next);
+	erratum_1418040_thread_switch(next);
+	ptrauth_thread_switch_user(next);
+
+	/*
+	 * Complete any pending TLB or cache maintenance on this CPU in case
+	 * the thread migrates to a different CPU.
+	 * This full barrier is also required by the membarrier system
+	 * call.
+	 */
+	dsb(ish);
+
+	/*
+	 * MTE thread switching must happen after the DSB above to ensure that
+	 * any asynchronous tag check faults have been logged in the TFSR*_EL1
+	 * registers.
+	 */
+	mte_thread_switch(next);
+	/* avoid expensive SCTLR_EL1 accesses if no change */
+	if (prev->thread.sctlr_user != next->thread.sctlr_user)
+		update_sctlr_el1(next->thread.sctlr_user);
+
+	/* the actual thread switch */
+	last = cpu_switch_to(prev, next);
+
+	return last;
+}
+
+struct wchan_info {
+	unsigned long	pc;
+	int		count;
+};
+
+static bool get_wchan_cb(void *arg, unsigned long pc)
+{
+	struct wchan_info *wchan_info = arg;
+
+	if (!in_sched_functions(pc)) {
+		wchan_info->pc = pc;
+		return false;
+	}
+	return wchan_info->count++ < 16;
+}
+
+unsigned long __get_wchan(struct task_struct *p)
+{
+	struct wchan_info wchan_info = {
+		.pc = 0,
+		.count = 0,
+	};
+
+	if (!try_get_task_stack(p))
+		return 0;
+
+	arch_stack_walk(get_wchan_cb, &wchan_info, p, NULL);
+
+	put_task_stack(p);
+
+	return wchan_info.pc;
+}
+
+unsigned long arch_align_stack(unsigned long sp)
+{
+	if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+		sp -= get_random_u32_below(PAGE_SIZE);
+	return sp & ~0xf;
+}
+
+#ifdef CONFIG_COMPAT
+int compat_elf_check_arch(const struct elf32_hdr *hdr)
+{
+	if (!system_supports_32bit_el0())
+		return false;
+
+	if ((hdr)->e_machine != EM_ARM)
+		return false;
+
+	if (!((hdr)->e_flags & EF_ARM_EABI_MASK))
+		return false;
+
+	/*
+	 * Prevent execve() of a 32-bit program from a deadline task
+	 * if the restricted affinity mask would be inadmissible on an
+	 * asymmetric system.
+	 */
+	return !static_branch_unlikely(&arm64_mismatched_32bit_el0) ||
+	       !dl_task_check_affinity(current, system_32bit_el0_cpumask());
+}
+#endif
+
+/*
+ * Called from setup_new_exec() after (COMPAT_)SET_PERSONALITY.
+ */
+void arch_setup_new_exec(void)
+{
+	unsigned long mmflags = 0;
+
+	if (is_compat_task()) {
+		mmflags = MMCF_AARCH32;
+
+		/*
+		 * Restrict the CPU affinity mask for a 32-bit task so that
+		 * it contains only 32-bit-capable CPUs.
+		 *
+		 * From the perspective of the task, this looks similar to
+		 * what would happen if the 64-bit-only CPUs were hot-unplugged
+		 * at the point of execve(), although we try a bit harder to
+		 * honour the cpuset hierarchy.
+		 */
+		if (static_branch_unlikely(&arm64_mismatched_32bit_el0))
+			force_compatible_cpus_allowed_ptr(current);
+	} else if (static_branch_unlikely(&arm64_mismatched_32bit_el0)) {
+		relax_compatible_cpus_allowed_ptr(current);
+	}
+
+	current->mm->context.flags = mmflags;
+	ptrauth_thread_init_user();
+	mte_thread_init_user();
+	erratum_1418040_new_exec();
+
+	if (task_spec_ssb_noexec(current)) {
+		arch_prctl_spec_ctrl_set(current, PR_SPEC_STORE_BYPASS,
+					 PR_SPEC_ENABLE);
+	}
+}
+
+#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
+/*
+ * Control the relaxed ABI allowing tagged user addresses into the kernel.
+ */
+static unsigned int tagged_addr_disabled;
+
+long set_tagged_addr_ctrl(struct task_struct *task, unsigned long arg)
+{
+	unsigned long valid_mask = PR_TAGGED_ADDR_ENABLE;
+	struct thread_info *ti = task_thread_info(task);
+
+	if (is_compat_thread(ti))
+		return -EINVAL;
+
+	if (system_supports_mte())
+		valid_mask |= PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC \
+			| PR_MTE_TAG_MASK;
+
+	if (arg & ~valid_mask)
+		return -EINVAL;
+
+	/*
+	 * Do not allow the enabling of the tagged address ABI if globally
+	 * disabled via sysctl abi.tagged_addr_disabled.
+	 */
+	if (arg & PR_TAGGED_ADDR_ENABLE && tagged_addr_disabled)
+		return -EINVAL;
+
+	if (set_mte_ctrl(task, arg) != 0)
+		return -EINVAL;
+
+	update_ti_thread_flag(ti, TIF_TAGGED_ADDR, arg & PR_TAGGED_ADDR_ENABLE);
+
+	return 0;
+}
+
+long get_tagged_addr_ctrl(struct task_struct *task)
+{
+	long ret = 0;
+	struct thread_info *ti = task_thread_info(task);
+
+	if (is_compat_thread(ti))
+		return -EINVAL;
+
+	if (test_ti_thread_flag(ti, TIF_TAGGED_ADDR))
+		ret = PR_TAGGED_ADDR_ENABLE;
+
+	ret |= get_mte_ctrl(task);
+
+	return ret;
+}
+
+/*
+ * Global sysctl to disable the tagged user addresses support. This control
+ * only prevents the tagged address ABI enabling via prctl() and does not
+ * disable it for tasks that already opted in to the relaxed ABI.
+ */
+
+static struct ctl_table tagged_addr_sysctl_table[] = {
+	{
+		.procname	= "tagged_addr_disabled",
+		.mode		= 0644,
+		.data		= &tagged_addr_disabled,
+		.maxlen		= sizeof(int),
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_ONE,
+	},
+	{ }
+};
+
+static int __init tagged_addr_init(void)
+{
+	if (!register_sysctl("abi", tagged_addr_sysctl_table))
+		return -EINVAL;
+	return 0;
+}
+
+core_initcall(tagged_addr_init);
+#endif	/* CONFIG_ARM64_TAGGED_ADDR_ABI */
+
+#ifdef CONFIG_BINFMT_ELF
+int arch_elf_adjust_prot(int prot, const struct arch_elf_state *state,
+			 bool has_interp, bool is_interp)
+{
+	/*
+	 * For dynamically linked executables the interpreter is
+	 * responsible for setting PROT_BTI on everything except
+	 * itself.
+	 */
+	if (is_interp != has_interp)
+		return prot;
+
+	if (!(state->flags & ARM64_ELF_BTI))
+		return prot;
+
+	if (prot & PROT_EXEC)
+		prot |= PROT_BTI;
+
+	return prot;
+}
+#endif
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
new file mode 100644
index 000000000..05f40c4e1
--- /dev/null
+++ b/arch/arm64/kernel/proton-pack.c
@@ -0,0 +1,1156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Handle detection, reporting and mitigation of Spectre v1, v2, v3a and v4, as
+ * detailed at:
+ *
+ *   https://developer.arm.com/support/arm-security-updates/speculative-processor-vulnerability
+ *
+ * This code was originally written hastily under an awful lot of stress and so
+ * aspects of it are somewhat hacky. Unfortunately, changing anything in here
+ * instantly makes me feel ill. Thanks, Jann. Thann.
+ *
+ * Copyright (C) 2018 ARM Ltd, All Rights Reserved.
+ * Copyright (C) 2020 Google LLC
+ *
+ * "If there's something strange in your neighbourhood, who you gonna call?"
+ *
+ * Authors: Will Deacon <will@kernel.org> and Marc Zyngier <maz@kernel.org>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+#include <linux/nospec.h>
+#include <linux/prctl.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/spectre.h>
+#include <asm/traps.h>
+#include <asm/vectors.h>
+#include <asm/virt.h>
+
+/*
+ * We try to ensure that the mitigation state can never change as the result of
+ * onlining a late CPU.
+ */
+static void update_mitigation_state(enum mitigation_state *oldp,
+				    enum mitigation_state new)
+{
+	enum mitigation_state state;
+
+	do {
+		state = READ_ONCE(*oldp);
+		if (new <= state)
+			break;
+
+		/* Userspace almost certainly can't deal with this. */
+		if (WARN_ON(system_capabilities_finalized()))
+			break;
+	} while (cmpxchg_relaxed(oldp, state, new) != state);
+}
+
+/*
+ * Spectre v1.
+ *
+ * The kernel can't protect userspace for this one: it's each person for
+ * themselves. Advertise what we're doing and be done with it.
+ */
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+/*
+ * Spectre v2.
+ *
+ * This one sucks. A CPU is either:
+ *
+ * - Mitigated in hardware and advertised by ID_AA64PFR0_EL1.CSV2.
+ * - Mitigated in hardware and listed in our "safe list".
+ * - Mitigated in software by firmware.
+ * - Mitigated in software by a CPU-specific dance in the kernel and a
+ *   firmware call at EL2.
+ * - Vulnerable.
+ *
+ * It's not unlikely for different CPUs in a big.LITTLE system to fall into
+ * different camps.
+ */
+static enum mitigation_state spectre_v2_state;
+
+static bool __read_mostly __nospectre_v2;
+static int __init parse_spectre_v2_param(char *str)
+{
+	__nospectre_v2 = true;
+	return 0;
+}
+early_param("nospectre_v2", parse_spectre_v2_param);
+
+static bool spectre_v2_mitigations_off(void)
+{
+	bool ret = __nospectre_v2 || cpu_mitigations_off();
+
+	if (ret)
+		pr_info_once("spectre-v2 mitigation disabled by command line option\n");
+
+	return ret;
+}
+
+static const char *get_bhb_affected_string(enum mitigation_state bhb_state)
+{
+	switch (bhb_state) {
+	case SPECTRE_UNAFFECTED:
+		return "";
+	default:
+	case SPECTRE_VULNERABLE:
+		return ", but not BHB";
+	case SPECTRE_MITIGATED:
+		return ", BHB";
+	}
+}
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	enum mitigation_state bhb_state = arm64_get_spectre_bhb_state();
+	const char *bhb_str = get_bhb_affected_string(bhb_state);
+	const char *v2_str = "Branch predictor hardening";
+
+	switch (spectre_v2_state) {
+	case SPECTRE_UNAFFECTED:
+		if (bhb_state == SPECTRE_UNAFFECTED)
+			return sprintf(buf, "Not affected\n");
+
+		/*
+		 * Platforms affected by Spectre-BHB can't report
+		 * "Not affected" for Spectre-v2.
+		 */
+		v2_str = "CSV2";
+		fallthrough;
+	case SPECTRE_MITIGATED:
+		if (bhb_state == SPECTRE_MITIGATED && _unprivileged_ebpf_enabled())
+			return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+		return sprintf(buf, "Mitigation: %s%s\n", v2_str, bhb_str);
+	case SPECTRE_VULNERABLE:
+		fallthrough;
+	default:
+		return sprintf(buf, "Vulnerable\n");
+	}
+}
+
+static enum mitigation_state spectre_v2_get_cpu_hw_mitigation_state(void)
+{
+	u64 pfr0;
+	static const struct midr_range spectre_v2_safe_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+		MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+		MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_2XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
+		{ /* sentinel */ }
+	};
+
+	/* If the CPU has CSV2 set, we're safe */
+	pfr0 = read_cpuid(ID_AA64PFR0_EL1);
+	if (cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_CSV2_SHIFT))
+		return SPECTRE_UNAFFECTED;
+
+	/* Alternatively, we have a list of unaffected CPUs */
+	if (is_midr_in_range_list(read_cpuid_id(), spectre_v2_safe_list))
+		return SPECTRE_UNAFFECTED;
+
+	return SPECTRE_VULNERABLE;
+}
+
+static enum mitigation_state spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	int ret;
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
+
+	ret = res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+	default:
+		fallthrough;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return SPECTRE_VULNERABLE;
+	}
+}
+
+bool has_spectre_v2(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	if (spectre_v2_get_cpu_hw_mitigation_state() == SPECTRE_UNAFFECTED)
+		return false;
+
+	if (spectre_v2_get_cpu_fw_mitigation_state() == SPECTRE_UNAFFECTED)
+		return false;
+
+	return true;
+}
+
+enum mitigation_state arm64_get_spectre_v2_state(void)
+{
+	return spectre_v2_state;
+}
+
+DEFINE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
+
+static void install_bp_hardening_cb(bp_hardening_cb_t fn)
+{
+	__this_cpu_write(bp_hardening_data.fn, fn);
+
+	/*
+	 * Vinz Clortho takes the hyp_vecs start/end "keys" at
+	 * the door when we're a guest. Skip the hyp-vectors work.
+	 */
+	if (!is_hyp_mode_available())
+		return;
+
+	__this_cpu_write(bp_hardening_data.slot, HYP_VECTOR_SPECTRE_DIRECT);
+}
+
+/* Called during entry so must be noinstr */
+static noinstr void call_smc_arch_workaround_1(void)
+{
+	arm_smccc_1_1_smc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
+}
+
+/* Called during entry so must be noinstr */
+static noinstr void call_hvc_arch_workaround_1(void)
+{
+	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
+}
+
+/* Called during entry so must be noinstr */
+static noinstr void qcom_link_stack_sanitisation(void)
+{
+	u64 tmp;
+
+	asm volatile("mov	%0, x30		\n"
+		     ".rept	16		\n"
+		     "bl	. + 4		\n"
+		     ".endr			\n"
+		     "mov	x30, %0		\n"
+		     : "=&r" (tmp));
+}
+
+static bp_hardening_cb_t spectre_v2_get_sw_mitigation_cb(void)
+{
+	u32 midr = read_cpuid_id();
+	if (((midr & MIDR_CPU_MODEL_MASK) != MIDR_QCOM_FALKOR) &&
+	    ((midr & MIDR_CPU_MODEL_MASK) != MIDR_QCOM_FALKOR_V1))
+		return NULL;
+
+	return qcom_link_stack_sanitisation;
+}
+
+static enum mitigation_state spectre_v2_enable_fw_mitigation(void)
+{
+	bp_hardening_cb_t cb;
+	enum mitigation_state state;
+
+	state = spectre_v2_get_cpu_fw_mitigation_state();
+	if (state != SPECTRE_MITIGATED)
+		return state;
+
+	if (spectre_v2_mitigations_off())
+		return SPECTRE_VULNERABLE;
+
+	switch (arm_smccc_1_1_get_conduit()) {
+	case SMCCC_CONDUIT_HVC:
+		cb = call_hvc_arch_workaround_1;
+		break;
+
+	case SMCCC_CONDUIT_SMC:
+		cb = call_smc_arch_workaround_1;
+		break;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+
+	/*
+	 * Prefer a CPU-specific workaround if it exists. Note that we
+	 * still rely on firmware for the mitigation at EL2.
+	 */
+	cb = spectre_v2_get_sw_mitigation_cb() ?: cb;
+	install_bp_hardening_cb(cb);
+	return SPECTRE_MITIGATED;
+}
+
+void spectre_v2_enable_mitigation(const struct arm64_cpu_capabilities *__unused)
+{
+	enum mitigation_state state;
+
+	WARN_ON(preemptible());
+
+	state = spectre_v2_get_cpu_hw_mitigation_state();
+	if (state == SPECTRE_VULNERABLE)
+		state = spectre_v2_enable_fw_mitigation();
+
+	update_mitigation_state(&spectre_v2_state, state);
+}
+
+/*
+ * Spectre-v3a.
+ *
+ * Phew, there's not an awful lot to do here! We just instruct EL2 to use
+ * an indirect trampoline for the hyp vectors so that guests can't read
+ * VBAR_EL2 to defeat randomisation of the hypervisor VA layout.
+ */
+bool has_spectre_v3a(const struct arm64_cpu_capabilities *entry, int scope)
+{
+	static const struct midr_range spectre_v3a_unsafe_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+		{},
+	};
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+	return is_midr_in_range_list(read_cpuid_id(), spectre_v3a_unsafe_list);
+}
+
+void spectre_v3a_enable_mitigation(const struct arm64_cpu_capabilities *__unused)
+{
+	struct bp_hardening_data *data = this_cpu_ptr(&bp_hardening_data);
+
+	if (this_cpu_has_cap(ARM64_SPECTRE_V3A))
+		data->slot += HYP_VECTOR_INDIRECT;
+}
+
+/*
+ * Spectre v4.
+ *
+ * If you thought Spectre v2 was nasty, wait until you see this mess. A CPU is
+ * either:
+ *
+ * - Mitigated in hardware and listed in our "safe list".
+ * - Mitigated in hardware via PSTATE.SSBS.
+ * - Mitigated in software by firmware (sometimes referred to as SSBD).
+ *
+ * Wait, that doesn't sound so bad, does it? Keep reading...
+ *
+ * A major source of headaches is that the software mitigation is enabled both
+ * on a per-task basis, but can also be forced on for the kernel, necessitating
+ * both context-switch *and* entry/exit hooks. To make it even worse, some CPUs
+ * allow EL0 to toggle SSBS directly, which can end up with the prctl() state
+ * being stale when re-entering the kernel. The usual big.LITTLE caveats apply,
+ * so you can have systems that have both firmware and SSBS mitigations. This
+ * means we actually have to reject late onlining of CPUs with mitigations if
+ * all of the currently onlined CPUs are safelisted, as the mitigation tends to
+ * be opt-in for userspace. Yes, really, the cure is worse than the disease.
+ *
+ * The only good part is that if the firmware mitigation is present, then it is
+ * present for all CPUs, meaning we don't have to worry about late onlining of a
+ * vulnerable CPU if one of the boot CPUs is using the firmware mitigation.
+ *
+ * Give me a VAX-11/780 any day of the week...
+ */
+static enum mitigation_state spectre_v4_state;
+
+/* This is the per-cpu state tracking whether we need to talk to firmware */
+DEFINE_PER_CPU_READ_MOSTLY(u64, arm64_ssbd_callback_required);
+
+enum spectre_v4_policy {
+	SPECTRE_V4_POLICY_MITIGATION_DYNAMIC,
+	SPECTRE_V4_POLICY_MITIGATION_ENABLED,
+	SPECTRE_V4_POLICY_MITIGATION_DISABLED,
+};
+
+static enum spectre_v4_policy __read_mostly __spectre_v4_policy;
+
+static const struct spectre_v4_param {
+	const char		*str;
+	enum spectre_v4_policy	policy;
+} spectre_v4_params[] = {
+	{ "force-on",	SPECTRE_V4_POLICY_MITIGATION_ENABLED, },
+	{ "force-off",	SPECTRE_V4_POLICY_MITIGATION_DISABLED, },
+	{ "kernel",	SPECTRE_V4_POLICY_MITIGATION_DYNAMIC, },
+};
+static int __init parse_spectre_v4_param(char *str)
+{
+	int i;
+
+	if (!str || !str[0])
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(spectre_v4_params); i++) {
+		const struct spectre_v4_param *param = &spectre_v4_params[i];
+
+		if (strncmp(str, param->str, strlen(param->str)))
+			continue;
+
+		__spectre_v4_policy = param->policy;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+early_param("ssbd", parse_spectre_v4_param);
+
+/*
+ * Because this was all written in a rush by people working in different silos,
+ * we've ended up with multiple command line options to control the same thing.
+ * Wrap these up in some helpers, which prefer disabling the mitigation if faced
+ * with contradictory parameters. The mitigation is always either "off",
+ * "dynamic" or "on".
+ */
+static bool spectre_v4_mitigations_off(void)
+{
+	bool ret = cpu_mitigations_off() ||
+		   __spectre_v4_policy == SPECTRE_V4_POLICY_MITIGATION_DISABLED;
+
+	if (ret)
+		pr_info_once("spectre-v4 mitigation disabled by command-line option\n");
+
+	return ret;
+}
+
+/* Do we need to toggle the mitigation state on entry to/exit from the kernel? */
+static bool spectre_v4_mitigations_dynamic(void)
+{
+	return !spectre_v4_mitigations_off() &&
+	       __spectre_v4_policy == SPECTRE_V4_POLICY_MITIGATION_DYNAMIC;
+}
+
+static bool spectre_v4_mitigations_on(void)
+{
+	return !spectre_v4_mitigations_off() &&
+	       __spectre_v4_policy == SPECTRE_V4_POLICY_MITIGATION_ENABLED;
+}
+
+ssize_t cpu_show_spec_store_bypass(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	switch (spectre_v4_state) {
+	case SPECTRE_UNAFFECTED:
+		return sprintf(buf, "Not affected\n");
+	case SPECTRE_MITIGATED:
+		return sprintf(buf, "Mitigation: Speculative Store Bypass disabled via prctl\n");
+	case SPECTRE_VULNERABLE:
+		fallthrough;
+	default:
+		return sprintf(buf, "Vulnerable\n");
+	}
+}
+
+enum mitigation_state arm64_get_spectre_v4_state(void)
+{
+	return spectre_v4_state;
+}
+
+static enum mitigation_state spectre_v4_get_cpu_hw_mitigation_state(void)
+{
+	static const struct midr_range spectre_v4_safe_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+		MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
+		{ /* sentinel */ },
+	};
+
+	if (is_midr_in_range_list(read_cpuid_id(), spectre_v4_safe_list))
+		return SPECTRE_UNAFFECTED;
+
+	/* CPU features are detected first */
+	if (this_cpu_has_cap(ARM64_SSBS))
+		return SPECTRE_MITIGATED;
+
+	return SPECTRE_VULNERABLE;
+}
+
+static enum mitigation_state spectre_v4_get_cpu_fw_mitigation_state(void)
+{
+	int ret;
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_2, &res);
+
+	ret = res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		fallthrough;
+	case SMCCC_RET_NOT_REQUIRED:
+		return SPECTRE_UNAFFECTED;
+	default:
+		fallthrough;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return SPECTRE_VULNERABLE;
+	}
+}
+
+bool has_spectre_v4(const struct arm64_cpu_capabilities *cap, int scope)
+{
+	enum mitigation_state state;
+
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	state = spectre_v4_get_cpu_hw_mitigation_state();
+	if (state == SPECTRE_VULNERABLE)
+		state = spectre_v4_get_cpu_fw_mitigation_state();
+
+	return state != SPECTRE_UNAFFECTED;
+}
+
+bool try_emulate_el1_ssbs(struct pt_regs *regs, u32 instr)
+{
+	const u32 instr_mask = ~(1U << PSTATE_Imm_shift);
+	const u32 instr_val = 0xd500401f | PSTATE_SSBS;
+
+	if ((instr & instr_mask) != instr_val)
+		return false;
+
+	if (instr & BIT(PSTATE_Imm_shift))
+		regs->pstate |= PSR_SSBS_BIT;
+	else
+		regs->pstate &= ~PSR_SSBS_BIT;
+
+	arm64_skip_faulting_instruction(regs, 4);
+	return true;
+}
+
+static enum mitigation_state spectre_v4_enable_hw_mitigation(void)
+{
+	enum mitigation_state state;
+
+	/*
+	 * If the system is mitigated but this CPU doesn't have SSBS, then
+	 * we must be on the safelist and there's nothing more to do.
+	 */
+	state = spectre_v4_get_cpu_hw_mitigation_state();
+	if (state != SPECTRE_MITIGATED || !this_cpu_has_cap(ARM64_SSBS))
+		return state;
+
+	if (spectre_v4_mitigations_off()) {
+		sysreg_clear_set(sctlr_el1, 0, SCTLR_ELx_DSSBS);
+		set_pstate_ssbs(1);
+		return SPECTRE_VULNERABLE;
+	}
+
+	/* SCTLR_EL1.DSSBS was initialised to 0 during boot */
+	set_pstate_ssbs(0);
+	return SPECTRE_MITIGATED;
+}
+
+/*
+ * Patch a branch over the Spectre-v4 mitigation code with a NOP so that
+ * we fallthrough and check whether firmware needs to be called on this CPU.
+ */
+void __init spectre_v4_patch_fw_mitigation_enable(struct alt_instr *alt,
+						  __le32 *origptr,
+						  __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 1); /* Branch -> NOP */
+
+	if (spectre_v4_mitigations_off())
+		return;
+
+	if (cpus_have_cap(ARM64_SSBS))
+		return;
+
+	if (spectre_v4_mitigations_dynamic())
+		*updptr = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+/*
+ * Patch a NOP in the Spectre-v4 mitigation code with an SMC/HVC instruction
+ * to call into firmware to adjust the mitigation state.
+ */
+void __init smccc_patch_fw_mitigation_conduit(struct alt_instr *alt,
+					       __le32 *origptr,
+					       __le32 *updptr, int nr_inst)
+{
+	u32 insn;
+
+	BUG_ON(nr_inst != 1); /* NOP -> HVC/SMC */
+
+	switch (arm_smccc_1_1_get_conduit()) {
+	case SMCCC_CONDUIT_HVC:
+		insn = aarch64_insn_get_hvc_value();
+		break;
+	case SMCCC_CONDUIT_SMC:
+		insn = aarch64_insn_get_smc_value();
+		break;
+	default:
+		return;
+	}
+
+	*updptr = cpu_to_le32(insn);
+}
+
+static enum mitigation_state spectre_v4_enable_fw_mitigation(void)
+{
+	enum mitigation_state state;
+
+	state = spectre_v4_get_cpu_fw_mitigation_state();
+	if (state != SPECTRE_MITIGATED)
+		return state;
+
+	if (spectre_v4_mitigations_off()) {
+		arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_WORKAROUND_2, false, NULL);
+		return SPECTRE_VULNERABLE;
+	}
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_WORKAROUND_2, true, NULL);
+
+	if (spectre_v4_mitigations_dynamic())
+		__this_cpu_write(arm64_ssbd_callback_required, 1);
+
+	return SPECTRE_MITIGATED;
+}
+
+void spectre_v4_enable_mitigation(const struct arm64_cpu_capabilities *__unused)
+{
+	enum mitigation_state state;
+
+	WARN_ON(preemptible());
+
+	state = spectre_v4_enable_hw_mitigation();
+	if (state == SPECTRE_VULNERABLE)
+		state = spectre_v4_enable_fw_mitigation();
+
+	update_mitigation_state(&spectre_v4_state, state);
+}
+
+static void __update_pstate_ssbs(struct pt_regs *regs, bool state)
+{
+	u64 bit = compat_user_mode(regs) ? PSR_AA32_SSBS_BIT : PSR_SSBS_BIT;
+
+	if (state)
+		regs->pstate |= bit;
+	else
+		regs->pstate &= ~bit;
+}
+
+void spectre_v4_enable_task_mitigation(struct task_struct *tsk)
+{
+	struct pt_regs *regs = task_pt_regs(tsk);
+	bool ssbs = false, kthread = tsk->flags & PF_KTHREAD;
+
+	if (spectre_v4_mitigations_off())
+		ssbs = true;
+	else if (spectre_v4_mitigations_dynamic() && !kthread)
+		ssbs = !test_tsk_thread_flag(tsk, TIF_SSBD);
+
+	__update_pstate_ssbs(regs, ssbs);
+}
+
+/*
+ * The Spectre-v4 mitigation can be controlled via a prctl() from userspace.
+ * This is interesting because the "speculation disabled" behaviour can be
+ * configured so that it is preserved across exec(), which means that the
+ * prctl() may be necessary even when PSTATE.SSBS can be toggled directly
+ * from userspace.
+ */
+static void ssbd_prctl_enable_mitigation(struct task_struct *task)
+{
+	task_clear_spec_ssb_noexec(task);
+	task_set_spec_ssb_disable(task);
+	set_tsk_thread_flag(task, TIF_SSBD);
+}
+
+static void ssbd_prctl_disable_mitigation(struct task_struct *task)
+{
+	task_clear_spec_ssb_noexec(task);
+	task_clear_spec_ssb_disable(task);
+	clear_tsk_thread_flag(task, TIF_SSBD);
+}
+
+static int ssbd_prctl_set(struct task_struct *task, unsigned long ctrl)
+{
+	switch (ctrl) {
+	case PR_SPEC_ENABLE:
+		/* Enable speculation: disable mitigation */
+		/*
+		 * Force disabled speculation prevents it from being
+		 * re-enabled.
+		 */
+		if (task_spec_ssb_force_disable(task))
+			return -EPERM;
+
+		/*
+		 * If the mitigation is forced on, then speculation is forced
+		 * off and we again prevent it from being re-enabled.
+		 */
+		if (spectre_v4_mitigations_on())
+			return -EPERM;
+
+		ssbd_prctl_disable_mitigation(task);
+		break;
+	case PR_SPEC_FORCE_DISABLE:
+		/* Force disable speculation: force enable mitigation */
+		/*
+		 * If the mitigation is forced off, then speculation is forced
+		 * on and we prevent it from being disabled.
+		 */
+		if (spectre_v4_mitigations_off())
+			return -EPERM;
+
+		task_set_spec_ssb_force_disable(task);
+		fallthrough;
+	case PR_SPEC_DISABLE:
+		/* Disable speculation: enable mitigation */
+		/* Same as PR_SPEC_FORCE_DISABLE */
+		if (spectre_v4_mitigations_off())
+			return -EPERM;
+
+		ssbd_prctl_enable_mitigation(task);
+		break;
+	case PR_SPEC_DISABLE_NOEXEC:
+		/* Disable speculation until execve(): enable mitigation */
+		/*
+		 * If the mitigation state is forced one way or the other, then
+		 * we must fail now before we try to toggle it on execve().
+		 */
+		if (task_spec_ssb_force_disable(task) ||
+		    spectre_v4_mitigations_off() ||
+		    spectre_v4_mitigations_on()) {
+			return -EPERM;
+		}
+
+		ssbd_prctl_enable_mitigation(task);
+		task_set_spec_ssb_noexec(task);
+		break;
+	default:
+		return -ERANGE;
+	}
+
+	spectre_v4_enable_task_mitigation(task);
+	return 0;
+}
+
+int arch_prctl_spec_ctrl_set(struct task_struct *task, unsigned long which,
+			     unsigned long ctrl)
+{
+	switch (which) {
+	case PR_SPEC_STORE_BYPASS:
+		return ssbd_prctl_set(task, ctrl);
+	default:
+		return -ENODEV;
+	}
+}
+
+static int ssbd_prctl_get(struct task_struct *task)
+{
+	switch (spectre_v4_state) {
+	case SPECTRE_UNAFFECTED:
+		return PR_SPEC_NOT_AFFECTED;
+	case SPECTRE_MITIGATED:
+		if (spectre_v4_mitigations_on())
+			return PR_SPEC_NOT_AFFECTED;
+
+		if (spectre_v4_mitigations_dynamic())
+			break;
+
+		/* Mitigations are disabled, so we're vulnerable. */
+		fallthrough;
+	case SPECTRE_VULNERABLE:
+		fallthrough;
+	default:
+		return PR_SPEC_ENABLE;
+	}
+
+	/* Check the mitigation state for this task */
+	if (task_spec_ssb_force_disable(task))
+		return PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE;
+
+	if (task_spec_ssb_noexec(task))
+		return PR_SPEC_PRCTL | PR_SPEC_DISABLE_NOEXEC;
+
+	if (task_spec_ssb_disable(task))
+		return PR_SPEC_PRCTL | PR_SPEC_DISABLE;
+
+	return PR_SPEC_PRCTL | PR_SPEC_ENABLE;
+}
+
+int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which)
+{
+	switch (which) {
+	case PR_SPEC_STORE_BYPASS:
+		return ssbd_prctl_get(task);
+	default:
+		return -ENODEV;
+	}
+}
+
+/*
+ * Spectre BHB.
+ *
+ * A CPU is either:
+ * - Mitigated by a branchy loop a CPU specific number of times, and listed
+ *   in our "loop mitigated list".
+ * - Mitigated in software by the firmware Spectre v2 call.
+ * - Has the ClearBHB instruction to perform the mitigation.
+ * - Has the 'Exception Clears Branch History Buffer' (ECBHB) feature, so no
+ *   software mitigation in the vectors is needed.
+ * - Has CSV2.3, so is unaffected.
+ */
+static enum mitigation_state spectre_bhb_state;
+
+enum mitigation_state arm64_get_spectre_bhb_state(void)
+{
+	return spectre_bhb_state;
+}
+
+enum bhb_mitigation_bits {
+	BHB_LOOP,
+	BHB_FW,
+	BHB_HW,
+	BHB_INSN,
+};
+static unsigned long system_bhb_mitigations;
+
+/*
+ * This must be called with SCOPE_LOCAL_CPU for each type of CPU, before any
+ * SCOPE_SYSTEM call will give the right answer.
+ */
+u8 spectre_bhb_loop_affected(int scope)
+{
+	u8 k = 0;
+	static u8 max_bhb_k;
+
+	if (scope == SCOPE_LOCAL_CPU) {
+		static const struct midr_range spectre_bhb_k32_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78AE),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k24_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k11_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k8_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+			{},
+		};
+
+		if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k32_list))
+			k = 32;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list))
+			k = 24;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list))
+			k = 11;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list))
+			k =  8;
+
+		max_bhb_k = max(max_bhb_k, k);
+	} else {
+		k = max_bhb_k;
+	}
+
+	return k;
+}
+
+static enum mitigation_state spectre_bhb_get_cpu_fw_mitigation_state(void)
+{
+	int ret;
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_3, &res);
+
+	ret = res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+	default:
+		fallthrough;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return SPECTRE_VULNERABLE;
+	}
+}
+
+static bool is_spectre_bhb_fw_affected(int scope)
+{
+	static bool system_affected;
+	enum mitigation_state fw_state;
+	bool has_smccc = arm_smccc_1_1_get_conduit() != SMCCC_CONDUIT_NONE;
+	static const struct midr_range spectre_bhb_firmware_mitigated_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A75),
+		{},
+	};
+	bool cpu_in_list = is_midr_in_range_list(read_cpuid_id(),
+					 spectre_bhb_firmware_mitigated_list);
+
+	if (scope != SCOPE_LOCAL_CPU)
+		return system_affected;
+
+	fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
+	if (cpu_in_list || (has_smccc && fw_state == SPECTRE_MITIGATED)) {
+		system_affected = true;
+		return true;
+	}
+
+	return false;
+}
+
+static bool supports_ecbhb(int scope)
+{
+	u64 mmfr1;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		mmfr1 = read_sysreg_s(SYS_ID_AA64MMFR1_EL1);
+	else
+		mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+
+	return cpuid_feature_extract_unsigned_field(mmfr1,
+						    ID_AA64MMFR1_EL1_ECBHB_SHIFT);
+}
+
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry,
+			     int scope)
+{
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	if (supports_csv2p3(scope))
+		return false;
+
+	if (supports_clearbhb(scope))
+		return true;
+
+	if (spectre_bhb_loop_affected(scope))
+		return true;
+
+	if (is_spectre_bhb_fw_affected(scope))
+		return true;
+
+	return false;
+}
+
+static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
+{
+	const char *v = arm64_get_bp_hardening_vector(slot);
+
+	__this_cpu_write(this_cpu_vector, v);
+
+	/*
+	 * When KPTI is in use, the vectors are switched when exiting to
+	 * user-space.
+	 */
+	if (arm64_kernel_unmapped_at_el0())
+		return;
+
+	write_sysreg(v, vbar_el1);
+	isb();
+}
+
+static bool __read_mostly __nospectre_bhb;
+static int __init parse_spectre_bhb_param(char *str)
+{
+	__nospectre_bhb = true;
+	return 0;
+}
+early_param("nospectre_bhb", parse_spectre_bhb_param);
+
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
+{
+	bp_hardening_cb_t cpu_cb;
+	enum mitigation_state fw_state, state = SPECTRE_VULNERABLE;
+	struct bp_hardening_data *data = this_cpu_ptr(&bp_hardening_data);
+
+	if (!is_spectre_bhb_affected(entry, SCOPE_LOCAL_CPU))
+		return;
+
+	if (arm64_get_spectre_v2_state() == SPECTRE_VULNERABLE) {
+		/* No point mitigating Spectre-BHB alone. */
+	} else if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY)) {
+		pr_info_once("spectre-bhb mitigation disabled by compile time option\n");
+	} else if (cpu_mitigations_off() || __nospectre_bhb) {
+		pr_info_once("spectre-bhb mitigation disabled by command line option\n");
+	} else if (supports_ecbhb(SCOPE_LOCAL_CPU)) {
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_HW, &system_bhb_mitigations);
+	} else if (supports_clearbhb(SCOPE_LOCAL_CPU)) {
+		/*
+		 * Ensure KVM uses the indirect vector which will have ClearBHB
+		 * added.
+		 */
+		if (!data->slot)
+			data->slot = HYP_VECTOR_INDIRECT;
+
+		this_cpu_set_vectors(EL1_VECTOR_BHB_CLEAR_INSN);
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_INSN, &system_bhb_mitigations);
+	} else if (spectre_bhb_loop_affected(SCOPE_LOCAL_CPU)) {
+		/*
+		 * Ensure KVM uses the indirect vector which will have the
+		 * branchy-loop added. A57/A72-r0 will already have selected
+		 * the spectre-indirect vector, which is sufficient for BHB
+		 * too.
+		 */
+		if (!data->slot)
+			data->slot = HYP_VECTOR_INDIRECT;
+
+		this_cpu_set_vectors(EL1_VECTOR_BHB_LOOP);
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_LOOP, &system_bhb_mitigations);
+	} else if (is_spectre_bhb_fw_affected(SCOPE_LOCAL_CPU)) {
+		fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
+		if (fw_state == SPECTRE_MITIGATED) {
+			/*
+			 * Ensure KVM uses one of the spectre bp_hardening
+			 * vectors. The indirect vector doesn't include the EL3
+			 * call, so needs upgrading to
+			 * HYP_VECTOR_SPECTRE_INDIRECT.
+			 */
+			if (!data->slot || data->slot == HYP_VECTOR_INDIRECT)
+				data->slot += 1;
+
+			this_cpu_set_vectors(EL1_VECTOR_BHB_FW);
+
+			/*
+			 * The WA3 call in the vectors supersedes the WA1 call
+			 * made during context-switch. Uninstall any firmware
+			 * bp_hardening callback.
+			 */
+			cpu_cb = spectre_v2_get_sw_mitigation_cb();
+			if (__this_cpu_read(bp_hardening_data.fn) != cpu_cb)
+				__this_cpu_write(bp_hardening_data.fn, NULL);
+
+			state = SPECTRE_MITIGATED;
+			set_bit(BHB_FW, &system_bhb_mitigations);
+		}
+	}
+
+	update_mitigation_state(&spectre_bhb_state, state);
+}
+
+/* Patched to NOP when enabled */
+void noinstr spectre_bhb_patch_loop_mitigation_enable(struct alt_instr *alt,
+						     __le32 *origptr,
+						      __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 1);
+
+	if (test_bit(BHB_LOOP, &system_bhb_mitigations))
+		*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+/* Patched to NOP when enabled */
+void noinstr spectre_bhb_patch_fw_mitigation_enabled(struct alt_instr *alt,
+						   __le32 *origptr,
+						   __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 1);
+
+	if (test_bit(BHB_FW, &system_bhb_mitigations))
+		*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+/* Patched to correct the immediate */
+void noinstr spectre_bhb_patch_loop_iter(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u8 rd;
+	u32 insn;
+	u16 loop_count = spectre_bhb_loop_affected(SCOPE_SYSTEM);
+
+	BUG_ON(nr_inst != 1); /* MOV -> MOV */
+
+	if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY))
+		return;
+
+	insn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, insn);
+	insn = aarch64_insn_gen_movewide(rd, loop_count, 0,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_ZERO);
+	*updptr++ = cpu_to_le32(insn);
+}
+
+/* Patched to mov WA3 when supported */
+void noinstr spectre_bhb_patch_wa3(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u8 rd;
+	u32 insn;
+
+	BUG_ON(nr_inst != 1); /* MOV -> MOV */
+
+	if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY) ||
+	    !test_bit(BHB_FW, &system_bhb_mitigations))
+		return;
+
+	insn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, insn);
+
+	insn = aarch64_insn_gen_logical_immediate(AARCH64_INSN_LOGIC_ORR,
+						  AARCH64_INSN_VARIANT_32BIT,
+						  AARCH64_INSN_REG_ZR, rd,
+						  ARM_SMCCC_ARCH_WORKAROUND_3);
+	if (WARN_ON_ONCE(insn == AARCH64_BREAK_FAULT))
+		return;
+
+	*updptr++ = cpu_to_le32(insn);
+}
+
+/* Patched to NOP when not supported */
+void __init spectre_bhb_patch_clearbhb(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 2);
+
+	if (test_bit(BHB_INSN, &system_bhb_mitigations))
+		return;
+
+	*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+	*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+#ifdef CONFIG_BPF_SYSCALL
+#define EBPF_WARN "Unprivileged eBPF is enabled, data leaks possible via Spectre v2 BHB attacks!\n"
+void unpriv_ebpf_notify(int new_state)
+{
+	if (spectre_v2_state == SPECTRE_VULNERABLE ||
+	    spectre_bhb_state != SPECTRE_MITIGATED)
+		return;
+
+	if (!new_state)
+		pr_err("WARNING: %s", EBPF_WARN);
+}
+#endif
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
new file mode 100644
index 000000000..29a8e444d
--- /dev/null
+++ b/arch/arm64/kernel/psci.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2013 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#define pr_fmt(fmt) "psci: " fmt
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/psci.h>
+#include <linux/mm.h>
+
+#include <uapi/linux/psci.h>
+
+#include <asm/cpu_ops.h>
+#include <asm/errno.h>
+#include <asm/smp_plat.h>
+
+static int __init cpu_psci_cpu_init(unsigned int cpu)
+{
+	return 0;
+}
+
+static int __init cpu_psci_cpu_prepare(unsigned int cpu)
+{
+	if (!psci_ops.cpu_on) {
+		pr_err("no cpu_on method, not booting CPU%d\n", cpu);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int cpu_psci_cpu_boot(unsigned int cpu)
+{
+	phys_addr_t pa_secondary_entry = __pa_symbol(secondary_entry);
+	int err = psci_ops.cpu_on(cpu_logical_map(cpu), pa_secondary_entry);
+	if (err)
+		pr_err("failed to boot CPU%d (%d)\n", cpu, err);
+
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static bool cpu_psci_cpu_can_disable(unsigned int cpu)
+{
+	return !psci_tos_resident_on(cpu);
+}
+
+static int cpu_psci_cpu_disable(unsigned int cpu)
+{
+	/* Fail early if we don't have CPU_OFF support */
+	if (!psci_ops.cpu_off)
+		return -EOPNOTSUPP;
+
+	/* Trusted OS will deny CPU_OFF */
+	if (psci_tos_resident_on(cpu))
+		return -EPERM;
+
+	return 0;
+}
+
+static void cpu_psci_cpu_die(unsigned int cpu)
+{
+	/*
+	 * There are no known implementations of PSCI actually using the
+	 * power state field, pass a sensible default for now.
+	 */
+	u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
+		    PSCI_0_2_POWER_STATE_TYPE_SHIFT;
+
+	psci_ops.cpu_off(state);
+}
+
+static int cpu_psci_cpu_kill(unsigned int cpu)
+{
+	int err;
+	unsigned long start, end;
+
+	if (!psci_ops.affinity_info)
+		return 0;
+	/*
+	 * cpu_kill could race with cpu_die and we can
+	 * potentially end up declaring this cpu undead
+	 * while it is dying. So, try again a few times.
+	 */
+
+	start = jiffies;
+	end = start + msecs_to_jiffies(100);
+	do {
+		err = psci_ops.affinity_info(cpu_logical_map(cpu), 0);
+		if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) {
+			pr_info("CPU%d killed (polled %d ms)\n", cpu,
+				jiffies_to_msecs(jiffies - start));
+			return 0;
+		}
+
+		usleep_range(100, 1000);
+	} while (time_before(jiffies, end));
+
+	pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",
+			cpu, err);
+	return -ETIMEDOUT;
+}
+#endif
+
+const struct cpu_operations cpu_psci_ops = {
+	.name		= "psci",
+	.cpu_init	= cpu_psci_cpu_init,
+	.cpu_prepare	= cpu_psci_cpu_prepare,
+	.cpu_boot	= cpu_psci_cpu_boot,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_can_disable = cpu_psci_cpu_can_disable,
+	.cpu_disable	= cpu_psci_cpu_disable,
+	.cpu_die	= cpu_psci_cpu_die,
+	.cpu_kill	= cpu_psci_cpu_kill,
+#endif
+};
+
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
new file mode 100644
index 000000000..b3f64144b
--- /dev/null
+++ b/arch/arm64/kernel/ptrace.c
@@ -0,0 +1,2309 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/ptrace.c
+ *
+ * By Ross Biro 1/23/92
+ * edited by Linus Torvalds
+ * ARM modifications Copyright (C) 2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/audit.h>
+#include <linux/compat.h>
+#include <linux/kernel.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/task_stack.h>
+#include <linux/mm.h>
+#include <linux/nospec.h>
+#include <linux/smp.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/seccomp.h>
+#include <linux/security.h>
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
+
+#include <asm/compat.h>
+#include <asm/cpufeature.h>
+#include <asm/debug-monitors.h>
+#include <asm/fpsimd.h>
+#include <asm/mte.h>
+#include <asm/pointer_auth.h>
+#include <asm/stacktrace.h>
+#include <asm/syscall.h>
+#include <asm/traps.h>
+#include <asm/system_misc.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+#define GPR_OFFSET_NAME(r) \
+	{.name = "x" #r, .offset = offsetof(struct pt_regs, regs[r])}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	GPR_OFFSET_NAME(0),
+	GPR_OFFSET_NAME(1),
+	GPR_OFFSET_NAME(2),
+	GPR_OFFSET_NAME(3),
+	GPR_OFFSET_NAME(4),
+	GPR_OFFSET_NAME(5),
+	GPR_OFFSET_NAME(6),
+	GPR_OFFSET_NAME(7),
+	GPR_OFFSET_NAME(8),
+	GPR_OFFSET_NAME(9),
+	GPR_OFFSET_NAME(10),
+	GPR_OFFSET_NAME(11),
+	GPR_OFFSET_NAME(12),
+	GPR_OFFSET_NAME(13),
+	GPR_OFFSET_NAME(14),
+	GPR_OFFSET_NAME(15),
+	GPR_OFFSET_NAME(16),
+	GPR_OFFSET_NAME(17),
+	GPR_OFFSET_NAME(18),
+	GPR_OFFSET_NAME(19),
+	GPR_OFFSET_NAME(20),
+	GPR_OFFSET_NAME(21),
+	GPR_OFFSET_NAME(22),
+	GPR_OFFSET_NAME(23),
+	GPR_OFFSET_NAME(24),
+	GPR_OFFSET_NAME(25),
+	GPR_OFFSET_NAME(26),
+	GPR_OFFSET_NAME(27),
+	GPR_OFFSET_NAME(28),
+	GPR_OFFSET_NAME(29),
+	GPR_OFFSET_NAME(30),
+	{.name = "lr", .offset = offsetof(struct pt_regs, regs[30])},
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(pstate),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))) ||
+		on_irq_stack(addr, sizeof(unsigned long));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
+/*
+ * TODO: does not yet catch signals sent when the child dies.
+ * in exit.c or in signal.c.
+ */
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+	/*
+	 * This would be better off in core code, but PTRACE_DETACH has
+	 * grown its fair share of arch-specific worts and changing it
+	 * is likely to cause regressions on obscure architectures.
+	 */
+	user_disable_single_step(child);
+}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+/*
+ * Handle hitting a HW-breakpoint.
+ */
+static void ptrace_hbptriggered(struct perf_event *bp,
+				struct perf_sample_data *data,
+				struct pt_regs *regs)
+{
+	struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
+	const char *desc = "Hardware breakpoint trap (ptrace)";
+
+#ifdef CONFIG_COMPAT
+	if (is_compat_task()) {
+		int si_errno = 0;
+		int i;
+
+		for (i = 0; i < ARM_MAX_BRP; ++i) {
+			if (current->thread.debug.hbp_break[i] == bp) {
+				si_errno = (i << 1) + 1;
+				break;
+			}
+		}
+
+		for (i = 0; i < ARM_MAX_WRP; ++i) {
+			if (current->thread.debug.hbp_watch[i] == bp) {
+				si_errno = -((i << 1) + 1);
+				break;
+			}
+		}
+		arm64_force_sig_ptrace_errno_trap(si_errno, bkpt->trigger,
+						  desc);
+		return;
+	}
+#endif
+	arm64_force_sig_fault(SIGTRAP, TRAP_HWBKPT, bkpt->trigger, desc);
+}
+
+/*
+ * Unregister breakpoints from this task and reset the pointers in
+ * the thread_struct.
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < ARM_MAX_BRP; i++) {
+		if (t->debug.hbp_break[i]) {
+			unregister_hw_breakpoint(t->debug.hbp_break[i]);
+			t->debug.hbp_break[i] = NULL;
+		}
+	}
+
+	for (i = 0; i < ARM_MAX_WRP; i++) {
+		if (t->debug.hbp_watch[i]) {
+			unregister_hw_breakpoint(t->debug.hbp_watch[i]);
+			t->debug.hbp_watch[i] = NULL;
+		}
+	}
+}
+
+void ptrace_hw_copy_thread(struct task_struct *tsk)
+{
+	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
+}
+
+static struct perf_event *ptrace_hbp_get_event(unsigned int note_type,
+					       struct task_struct *tsk,
+					       unsigned long idx)
+{
+	struct perf_event *bp = ERR_PTR(-EINVAL);
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if (idx >= ARM_MAX_BRP)
+			goto out;
+		idx = array_index_nospec(idx, ARM_MAX_BRP);
+		bp = tsk->thread.debug.hbp_break[idx];
+		break;
+	case NT_ARM_HW_WATCH:
+		if (idx >= ARM_MAX_WRP)
+			goto out;
+		idx = array_index_nospec(idx, ARM_MAX_WRP);
+		bp = tsk->thread.debug.hbp_watch[idx];
+		break;
+	}
+
+out:
+	return bp;
+}
+
+static int ptrace_hbp_set_event(unsigned int note_type,
+				struct task_struct *tsk,
+				unsigned long idx,
+				struct perf_event *bp)
+{
+	int err = -EINVAL;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if (idx >= ARM_MAX_BRP)
+			goto out;
+		idx = array_index_nospec(idx, ARM_MAX_BRP);
+		tsk->thread.debug.hbp_break[idx] = bp;
+		err = 0;
+		break;
+	case NT_ARM_HW_WATCH:
+		if (idx >= ARM_MAX_WRP)
+			goto out;
+		idx = array_index_nospec(idx, ARM_MAX_WRP);
+		tsk->thread.debug.hbp_watch[idx] = bp;
+		err = 0;
+		break;
+	}
+
+out:
+	return err;
+}
+
+static struct perf_event *ptrace_hbp_create(unsigned int note_type,
+					    struct task_struct *tsk,
+					    unsigned long idx)
+{
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+	int err, type;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		type = HW_BREAKPOINT_X;
+		break;
+	case NT_ARM_HW_WATCH:
+		type = HW_BREAKPOINT_RW;
+		break;
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	ptrace_breakpoint_init(&attr);
+
+	/*
+	 * Initialise fields to sane defaults
+	 * (i.e. values that will pass validation).
+	 */
+	attr.bp_addr	= 0;
+	attr.bp_len	= HW_BREAKPOINT_LEN_4;
+	attr.bp_type	= type;
+	attr.disabled	= 1;
+
+	bp = register_user_hw_breakpoint(&attr, ptrace_hbptriggered, NULL, tsk);
+	if (IS_ERR(bp))
+		return bp;
+
+	err = ptrace_hbp_set_event(note_type, tsk, idx, bp);
+	if (err)
+		return ERR_PTR(err);
+
+	return bp;
+}
+
+static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type,
+				     struct arch_hw_breakpoint_ctrl ctrl,
+				     struct perf_event_attr *attr)
+{
+	int err, len, type, offset, disabled = !ctrl.enabled;
+
+	attr->disabled = disabled;
+	if (disabled)
+		return 0;
+
+	err = arch_bp_generic_fields(ctrl, &len, &type, &offset);
+	if (err)
+		return err;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		if ((type & HW_BREAKPOINT_X) != type)
+			return -EINVAL;
+		break;
+	case NT_ARM_HW_WATCH:
+		if ((type & HW_BREAKPOINT_RW) != type)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	attr->bp_len	= len;
+	attr->bp_type	= type;
+	attr->bp_addr	+= offset;
+
+	return 0;
+}
+
+static int ptrace_hbp_get_resource_info(unsigned int note_type, u32 *info)
+{
+	u8 num;
+	u32 reg = 0;
+
+	switch (note_type) {
+	case NT_ARM_HW_BREAK:
+		num = hw_breakpoint_slots(TYPE_INST);
+		break;
+	case NT_ARM_HW_WATCH:
+		num = hw_breakpoint_slots(TYPE_DATA);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg |= debug_monitors_arch();
+	reg <<= 8;
+	reg |= num;
+
+	*info = reg;
+	return 0;
+}
+
+static int ptrace_hbp_get_ctrl(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u32 *ctrl)
+{
+	struct perf_event *bp = ptrace_hbp_get_event(note_type, tsk, idx);
+
+	if (IS_ERR(bp))
+		return PTR_ERR(bp);
+
+	*ctrl = bp ? encode_ctrl_reg(counter_arch_bp(bp)->ctrl) : 0;
+	return 0;
+}
+
+static int ptrace_hbp_get_addr(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u64 *addr)
+{
+	struct perf_event *bp = ptrace_hbp_get_event(note_type, tsk, idx);
+
+	if (IS_ERR(bp))
+		return PTR_ERR(bp);
+
+	*addr = bp ? counter_arch_bp(bp)->address : 0;
+	return 0;
+}
+
+static struct perf_event *ptrace_hbp_get_initialised_bp(unsigned int note_type,
+							struct task_struct *tsk,
+							unsigned long idx)
+{
+	struct perf_event *bp = ptrace_hbp_get_event(note_type, tsk, idx);
+
+	if (!bp)
+		bp = ptrace_hbp_create(note_type, tsk, idx);
+
+	return bp;
+}
+
+static int ptrace_hbp_set_ctrl(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u32 uctrl)
+{
+	int err;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+	struct arch_hw_breakpoint_ctrl ctrl;
+
+	bp = ptrace_hbp_get_initialised_bp(note_type, tsk, idx);
+	if (IS_ERR(bp)) {
+		err = PTR_ERR(bp);
+		return err;
+	}
+
+	attr = bp->attr;
+	decode_ctrl_reg(uctrl, &ctrl);
+	err = ptrace_hbp_fill_attr_ctrl(note_type, ctrl, &attr);
+	if (err)
+		return err;
+
+	return modify_user_hw_breakpoint(bp, &attr);
+}
+
+static int ptrace_hbp_set_addr(unsigned int note_type,
+			       struct task_struct *tsk,
+			       unsigned long idx,
+			       u64 addr)
+{
+	int err;
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+
+	bp = ptrace_hbp_get_initialised_bp(note_type, tsk, idx);
+	if (IS_ERR(bp)) {
+		err = PTR_ERR(bp);
+		return err;
+	}
+
+	attr = bp->attr;
+	attr.bp_addr = addr;
+	err = modify_user_hw_breakpoint(bp, &attr);
+	return err;
+}
+
+#define PTRACE_HBP_ADDR_SZ	sizeof(u64)
+#define PTRACE_HBP_CTRL_SZ	sizeof(u32)
+#define PTRACE_HBP_PAD_SZ	sizeof(u32)
+
+static int hw_break_get(struct task_struct *target,
+			const struct user_regset *regset,
+			struct membuf to)
+{
+	unsigned int note_type = regset->core_note_type;
+	int ret, idx = 0;
+	u32 info, ctrl;
+	u64 addr;
+
+	/* Resource info */
+	ret = ptrace_hbp_get_resource_info(note_type, &info);
+	if (ret)
+		return ret;
+
+	membuf_write(&to, &info, sizeof(info));
+	membuf_zero(&to, sizeof(u32));
+	/* (address, ctrl) registers */
+	while (to.left) {
+		ret = ptrace_hbp_get_addr(note_type, target, idx, &addr);
+		if (ret)
+			return ret;
+		ret = ptrace_hbp_get_ctrl(note_type, target, idx, &ctrl);
+		if (ret)
+			return ret;
+		membuf_store(&to, addr);
+		membuf_store(&to, ctrl);
+		membuf_zero(&to, sizeof(u32));
+		idx++;
+	}
+	return 0;
+}
+
+static int hw_break_set(struct task_struct *target,
+			const struct user_regset *regset,
+			unsigned int pos, unsigned int count,
+			const void *kbuf, const void __user *ubuf)
+{
+	unsigned int note_type = regset->core_note_type;
+	int ret, idx = 0, offset, limit;
+	u32 ctrl;
+	u64 addr;
+
+	/* Resource info and pad */
+	offset = offsetof(struct user_hwdebug_state, dbg_regs);
+	user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, offset);
+
+	/* (address, ctrl) registers */
+	limit = regset->n * regset->size;
+	while (count && offset < limit) {
+		if (count < PTRACE_HBP_ADDR_SZ)
+			return -EINVAL;
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &addr,
+					 offset, offset + PTRACE_HBP_ADDR_SZ);
+		if (ret)
+			return ret;
+		ret = ptrace_hbp_set_addr(note_type, target, idx, addr);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_ADDR_SZ;
+
+		if (!count)
+			break;
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl,
+					 offset, offset + PTRACE_HBP_CTRL_SZ);
+		if (ret)
+			return ret;
+		ret = ptrace_hbp_set_ctrl(note_type, target, idx, ctrl);
+		if (ret)
+			return ret;
+		offset += PTRACE_HBP_CTRL_SZ;
+
+		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+					  offset, offset + PTRACE_HBP_PAD_SZ);
+		offset += PTRACE_HBP_PAD_SZ;
+		idx++;
+	}
+
+	return 0;
+}
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+
+static int gpr_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   struct membuf to)
+{
+	struct user_pt_regs *uregs = &task_pt_regs(target)->user_regs;
+	return membuf_write(&to, uregs, sizeof(*uregs));
+}
+
+static int gpr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct user_pt_regs newregs = task_pt_regs(target)->user_regs;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newregs, 0, -1);
+	if (ret)
+		return ret;
+
+	if (!valid_user_regs(&newregs, target))
+		return -EINVAL;
+
+	task_pt_regs(target)->user_regs = newregs;
+	return 0;
+}
+
+static int fpr_active(struct task_struct *target, const struct user_regset *regset)
+{
+	if (!system_supports_fpsimd())
+		return -ENODEV;
+	return regset->n;
+}
+
+/*
+ * TODO: update fp accessors for lazy context switching (sync/flush hwstate)
+ */
+static int __fpr_get(struct task_struct *target,
+		     const struct user_regset *regset,
+		     struct membuf to)
+{
+	struct user_fpsimd_state *uregs;
+
+	sve_sync_to_fpsimd(target);
+
+	uregs = &target->thread.uw.fpsimd_state;
+
+	return membuf_write(&to, uregs, sizeof(*uregs));
+}
+
+static int fpr_get(struct task_struct *target, const struct user_regset *regset,
+		   struct membuf to)
+{
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
+	if (target == current)
+		fpsimd_preserve_current_state();
+
+	return __fpr_get(target, regset, to);
+}
+
+static int __fpr_set(struct task_struct *target,
+		     const struct user_regset *regset,
+		     unsigned int pos, unsigned int count,
+		     const void *kbuf, const void __user *ubuf,
+		     unsigned int start_pos)
+{
+	int ret;
+	struct user_fpsimd_state newstate;
+
+	/*
+	 * Ensure target->thread.uw.fpsimd_state is up to date, so that a
+	 * short copyin can't resurrect stale data.
+	 */
+	sve_sync_to_fpsimd(target);
+
+	newstate = target->thread.uw.fpsimd_state;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newstate,
+				 start_pos, start_pos + sizeof(newstate));
+	if (ret)
+		return ret;
+
+	target->thread.uw.fpsimd_state = newstate;
+
+	return ret;
+}
+
+static int fpr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
+	ret = __fpr_set(target, regset, pos, count, kbuf, ubuf, 0);
+	if (ret)
+		return ret;
+
+	sve_sync_from_fpsimd_zeropad(target);
+	fpsimd_flush_task_state(target);
+
+	return ret;
+}
+
+static int tls_get(struct task_struct *target, const struct user_regset *regset,
+		   struct membuf to)
+{
+	int ret;
+
+	if (target == current)
+		tls_preserve_current_state();
+
+	ret = membuf_store(&to, target->thread.uw.tp_value);
+	if (system_supports_tpidr2())
+		ret = membuf_store(&to, target->thread.tpidr2_el0);
+	else
+		ret = membuf_zero(&to, sizeof(u64));
+
+	return ret;
+}
+
+static int tls_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	unsigned long tls[2];
+
+	tls[0] = target->thread.uw.tp_value;
+	if (system_supports_tpidr2())
+		tls[1] = target->thread.tpidr2_el0;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, tls, 0, count);
+	if (ret)
+		return ret;
+
+	target->thread.uw.tp_value = tls[0];
+	if (system_supports_tpidr2())
+		target->thread.tpidr2_el0 = tls[1];
+
+	return ret;
+}
+
+static int system_call_get(struct task_struct *target,
+			   const struct user_regset *regset,
+			   struct membuf to)
+{
+	return membuf_store(&to, task_pt_regs(target)->syscallno);
+}
+
+static int system_call_set(struct task_struct *target,
+			   const struct user_regset *regset,
+			   unsigned int pos, unsigned int count,
+			   const void *kbuf, const void __user *ubuf)
+{
+	int syscallno = task_pt_regs(target)->syscallno;
+	int ret;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &syscallno, 0, -1);
+	if (ret)
+		return ret;
+
+	task_pt_regs(target)->syscallno = syscallno;
+	return ret;
+}
+
+#ifdef CONFIG_ARM64_SVE
+
+static void sve_init_header_from_task(struct user_sve_header *header,
+				      struct task_struct *target,
+				      enum vec_type type)
+{
+	unsigned int vq;
+	bool active;
+	bool fpsimd_only;
+	enum vec_type task_type;
+
+	memset(header, 0, sizeof(*header));
+
+	/* Check if the requested registers are active for the task */
+	if (thread_sm_enabled(&target->thread))
+		task_type = ARM64_VEC_SME;
+	else
+		task_type = ARM64_VEC_SVE;
+	active = (task_type == type);
+
+	switch (type) {
+	case ARM64_VEC_SVE:
+		if (test_tsk_thread_flag(target, TIF_SVE_VL_INHERIT))
+			header->flags |= SVE_PT_VL_INHERIT;
+		fpsimd_only = !test_tsk_thread_flag(target, TIF_SVE);
+		break;
+	case ARM64_VEC_SME:
+		if (test_tsk_thread_flag(target, TIF_SME_VL_INHERIT))
+			header->flags |= SVE_PT_VL_INHERIT;
+		fpsimd_only = false;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return;
+	}
+
+	if (active) {
+		if (fpsimd_only) {
+			header->flags |= SVE_PT_REGS_FPSIMD;
+		} else {
+			header->flags |= SVE_PT_REGS_SVE;
+		}
+	}
+
+	header->vl = task_get_vl(target, type);
+	vq = sve_vq_from_vl(header->vl);
+
+	header->max_vl = vec_max_vl(type);
+	header->size = SVE_PT_SIZE(vq, header->flags);
+	header->max_size = SVE_PT_SIZE(sve_vq_from_vl(header->max_vl),
+				      SVE_PT_REGS_SVE);
+}
+
+static unsigned int sve_size_from_header(struct user_sve_header const *header)
+{
+	return ALIGN(header->size, SVE_VQ_BYTES);
+}
+
+static int sve_get_common(struct task_struct *target,
+			  const struct user_regset *regset,
+			  struct membuf to,
+			  enum vec_type type)
+{
+	struct user_sve_header header;
+	unsigned int vq;
+	unsigned long start, end;
+
+	/* Header */
+	sve_init_header_from_task(&header, target, type);
+	vq = sve_vq_from_vl(header.vl);
+
+	membuf_write(&to, &header, sizeof(header));
+
+	if (target == current)
+		fpsimd_preserve_current_state();
+
+	BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
+	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
+
+	switch ((header.flags & SVE_PT_REGS_MASK)) {
+	case SVE_PT_REGS_FPSIMD:
+		return __fpr_get(target, regset, to);
+
+	case SVE_PT_REGS_SVE:
+		start = SVE_PT_SVE_OFFSET;
+		end = SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq);
+		membuf_write(&to, target->thread.sve_state, end - start);
+
+		start = end;
+		end = SVE_PT_SVE_FPSR_OFFSET(vq);
+		membuf_zero(&to, end - start);
+
+		/*
+		 * Copy fpsr, and fpcr which must follow contiguously in
+		 * struct fpsimd_state:
+		 */
+		start = end;
+		end = SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE;
+		membuf_write(&to, &target->thread.uw.fpsimd_state.fpsr,
+			     end - start);
+
+		start = end;
+		end = sve_size_from_header(&header);
+		return membuf_zero(&to, end - start);
+
+	default:
+		return 0;
+	}
+}
+
+static int sve_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   struct membuf to)
+{
+	if (!system_supports_sve())
+		return -EINVAL;
+
+	return sve_get_common(target, regset, to, ARM64_VEC_SVE);
+}
+
+static int sve_set_common(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf,
+			  enum vec_type type)
+{
+	int ret;
+	struct user_sve_header header;
+	unsigned int vq;
+	unsigned long start, end;
+
+	/* Header */
+	if (count < sizeof(header))
+		return -EINVAL;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &header,
+				 0, sizeof(header));
+	if (ret)
+		goto out;
+
+	/*
+	 * Apart from SVE_PT_REGS_MASK, all SVE_PT_* flags are consumed by
+	 * vec_set_vector_length(), which will also validate them for us:
+	 */
+	ret = vec_set_vector_length(target, type, header.vl,
+		((unsigned long)header.flags & ~SVE_PT_REGS_MASK) << 16);
+	if (ret)
+		goto out;
+
+	/* Actual VL set may be less than the user asked for: */
+	vq = sve_vq_from_vl(task_get_vl(target, type));
+
+	/* Enter/exit streaming mode */
+	if (system_supports_sme()) {
+		u64 old_svcr = target->thread.svcr;
+
+		switch (type) {
+		case ARM64_VEC_SVE:
+			target->thread.svcr &= ~SVCR_SM_MASK;
+			break;
+		case ARM64_VEC_SME:
+			target->thread.svcr |= SVCR_SM_MASK;
+
+			/*
+			 * Disable traps and ensure there is SME storage but
+			 * preserve any currently set values in ZA/ZT.
+			 */
+			sme_alloc(target, false);
+			set_tsk_thread_flag(target, TIF_SME);
+			break;
+		default:
+			WARN_ON_ONCE(1);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * If we switched then invalidate any existing SVE
+		 * state and ensure there's storage.
+		 */
+		if (target->thread.svcr != old_svcr)
+			sve_alloc(target, true);
+	}
+
+	/* Registers: FPSIMD-only case */
+
+	BUILD_BUG_ON(SVE_PT_FPSIMD_OFFSET != sizeof(header));
+	if ((header.flags & SVE_PT_REGS_MASK) == SVE_PT_REGS_FPSIMD) {
+		ret = __fpr_set(target, regset, pos, count, kbuf, ubuf,
+				SVE_PT_FPSIMD_OFFSET);
+		clear_tsk_thread_flag(target, TIF_SVE);
+		target->thread.fp_type = FP_STATE_FPSIMD;
+		goto out;
+	}
+
+	/*
+	 * Otherwise: no registers or full SVE case.  For backwards
+	 * compatibility reasons we treat empty flags as SVE registers.
+	 */
+
+	/*
+	 * If setting a different VL from the requested VL and there is
+	 * register data, the data layout will be wrong: don't even
+	 * try to set the registers in this case.
+	 */
+	if (count && vq != sve_vq_from_vl(header.vl)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	sve_alloc(target, true);
+	if (!target->thread.sve_state) {
+		ret = -ENOMEM;
+		clear_tsk_thread_flag(target, TIF_SVE);
+		target->thread.fp_type = FP_STATE_FPSIMD;
+		goto out;
+	}
+
+	/*
+	 * Ensure target->thread.sve_state is up to date with target's
+	 * FPSIMD regs, so that a short copyin leaves trailing
+	 * registers unmodified.  Only enable SVE if we are
+	 * configuring normal SVE, a system with streaming SVE may not
+	 * have normal SVE.
+	 */
+	fpsimd_sync_to_sve(target);
+	if (type == ARM64_VEC_SVE)
+		set_tsk_thread_flag(target, TIF_SVE);
+	target->thread.fp_type = FP_STATE_SVE;
+
+	BUILD_BUG_ON(SVE_PT_SVE_OFFSET != sizeof(header));
+	start = SVE_PT_SVE_OFFSET;
+	end = SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 target->thread.sve_state,
+				 start, end);
+	if (ret)
+		goto out;
+
+	start = end;
+	end = SVE_PT_SVE_FPSR_OFFSET(vq);
+	user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, start, end);
+
+	/*
+	 * Copy fpsr, and fpcr which must follow contiguously in
+	 * struct fpsimd_state:
+	 */
+	start = end;
+	end = SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &target->thread.uw.fpsimd_state.fpsr,
+				 start, end);
+
+out:
+	fpsimd_flush_task_state(target);
+	return ret;
+}
+
+static int sve_set(struct task_struct *target,
+		   const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	if (!system_supports_sve())
+		return -EINVAL;
+
+	return sve_set_common(target, regset, pos, count, kbuf, ubuf,
+			      ARM64_VEC_SVE);
+}
+
+#endif /* CONFIG_ARM64_SVE */
+
+#ifdef CONFIG_ARM64_SME
+
+static int ssve_get(struct task_struct *target,
+		   const struct user_regset *regset,
+		   struct membuf to)
+{
+	if (!system_supports_sme())
+		return -EINVAL;
+
+	return sve_get_common(target, regset, to, ARM64_VEC_SME);
+}
+
+static int ssve_set(struct task_struct *target,
+		    const struct user_regset *regset,
+		    unsigned int pos, unsigned int count,
+		    const void *kbuf, const void __user *ubuf)
+{
+	if (!system_supports_sme())
+		return -EINVAL;
+
+	return sve_set_common(target, regset, pos, count, kbuf, ubuf,
+			      ARM64_VEC_SME);
+}
+
+static int za_get(struct task_struct *target,
+		  const struct user_regset *regset,
+		  struct membuf to)
+{
+	struct user_za_header header;
+	unsigned int vq;
+	unsigned long start, end;
+
+	if (!system_supports_sme())
+		return -EINVAL;
+
+	/* Header */
+	memset(&header, 0, sizeof(header));
+
+	if (test_tsk_thread_flag(target, TIF_SME_VL_INHERIT))
+		header.flags |= ZA_PT_VL_INHERIT;
+
+	header.vl = task_get_sme_vl(target);
+	vq = sve_vq_from_vl(header.vl);
+	header.max_vl = sme_max_vl();
+	header.max_size = ZA_PT_SIZE(vq);
+
+	/* If ZA is not active there is only the header */
+	if (thread_za_enabled(&target->thread))
+		header.size = ZA_PT_SIZE(vq);
+	else
+		header.size = ZA_PT_ZA_OFFSET;
+
+	membuf_write(&to, &header, sizeof(header));
+
+	BUILD_BUG_ON(ZA_PT_ZA_OFFSET != sizeof(header));
+	end = ZA_PT_ZA_OFFSET;
+
+	if (target == current)
+		fpsimd_preserve_current_state();
+
+	/* Any register data to include? */
+	if (thread_za_enabled(&target->thread)) {
+		start = end;
+		end = ZA_PT_SIZE(vq);
+		membuf_write(&to, target->thread.sme_state, end - start);
+	}
+
+	/* Zero any trailing padding */
+	start = end;
+	end = ALIGN(header.size, SVE_VQ_BYTES);
+	return membuf_zero(&to, end - start);
+}
+
+static int za_set(struct task_struct *target,
+		  const struct user_regset *regset,
+		  unsigned int pos, unsigned int count,
+		  const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	struct user_za_header header;
+	unsigned int vq;
+	unsigned long start, end;
+
+	if (!system_supports_sme())
+		return -EINVAL;
+
+	/* Header */
+	if (count < sizeof(header))
+		return -EINVAL;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &header,
+				 0, sizeof(header));
+	if (ret)
+		goto out;
+
+	/*
+	 * All current ZA_PT_* flags are consumed by
+	 * vec_set_vector_length(), which will also validate them for
+	 * us:
+	 */
+	ret = vec_set_vector_length(target, ARM64_VEC_SME, header.vl,
+		((unsigned long)header.flags) << 16);
+	if (ret)
+		goto out;
+
+	/* Actual VL set may be less than the user asked for: */
+	vq = sve_vq_from_vl(task_get_sme_vl(target));
+
+	/* Ensure there is some SVE storage for streaming mode */
+	if (!target->thread.sve_state) {
+		sve_alloc(target, false);
+		if (!target->thread.sve_state) {
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+
+	/*
+	 * Only flush the storage if PSTATE.ZA was not already set,
+	 * otherwise preserve any existing data.
+	 */
+	sme_alloc(target, !thread_za_enabled(&target->thread));
+	if (!target->thread.sme_state)
+		return -ENOMEM;
+
+	/* If there is no data then disable ZA */
+	if (!count) {
+		target->thread.svcr &= ~SVCR_ZA_MASK;
+		goto out;
+	}
+
+	/*
+	 * If setting a different VL from the requested VL and there is
+	 * register data, the data layout will be wrong: don't even
+	 * try to set the registers in this case.
+	 */
+	if (vq != sve_vq_from_vl(header.vl)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	BUILD_BUG_ON(ZA_PT_ZA_OFFSET != sizeof(header));
+	start = ZA_PT_ZA_OFFSET;
+	end = ZA_PT_SIZE(vq);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 target->thread.sme_state,
+				 start, end);
+	if (ret)
+		goto out;
+
+	/* Mark ZA as active and let userspace use it */
+	set_tsk_thread_flag(target, TIF_SME);
+	target->thread.svcr |= SVCR_ZA_MASK;
+
+out:
+	fpsimd_flush_task_state(target);
+	return ret;
+}
+
+static int zt_get(struct task_struct *target,
+		  const struct user_regset *regset,
+		  struct membuf to)
+{
+	if (!system_supports_sme2())
+		return -EINVAL;
+
+	/*
+	 * If PSTATE.ZA is not set then ZT will be zeroed when it is
+	 * enabled so report the current register value as zero.
+	 */
+	if (thread_za_enabled(&target->thread))
+		membuf_write(&to, thread_zt_state(&target->thread),
+			     ZT_SIG_REG_BYTES);
+	else
+		membuf_zero(&to, ZT_SIG_REG_BYTES);
+
+	return 0;
+}
+
+static int zt_set(struct task_struct *target,
+		  const struct user_regset *regset,
+		  unsigned int pos, unsigned int count,
+		  const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+
+	if (!system_supports_sme2())
+		return -EINVAL;
+
+	/* Ensure SVE storage in case this is first use of SME */
+	sve_alloc(target, false);
+	if (!target->thread.sve_state)
+		return -ENOMEM;
+
+	if (!thread_za_enabled(&target->thread)) {
+		sme_alloc(target, true);
+		if (!target->thread.sme_state)
+			return -ENOMEM;
+	}
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 thread_zt_state(&target->thread),
+				 0, ZT_SIG_REG_BYTES);
+	if (ret == 0) {
+		target->thread.svcr |= SVCR_ZA_MASK;
+		set_tsk_thread_flag(target, TIF_SME);
+	}
+
+	fpsimd_flush_task_state(target);
+
+	return ret;
+}
+
+#endif /* CONFIG_ARM64_SME */
+
+#ifdef CONFIG_ARM64_PTR_AUTH
+static int pac_mask_get(struct task_struct *target,
+			const struct user_regset *regset,
+			struct membuf to)
+{
+	/*
+	 * The PAC bits can differ across data and instruction pointers
+	 * depending on TCR_EL1.TBID*, which we may make use of in future, so
+	 * we expose separate masks.
+	 */
+	unsigned long mask = ptrauth_user_pac_mask();
+	struct user_pac_mask uregs = {
+		.data_mask = mask,
+		.insn_mask = mask,
+	};
+
+	if (!system_supports_address_auth())
+		return -EINVAL;
+
+	return membuf_write(&to, &uregs, sizeof(uregs));
+}
+
+static int pac_enabled_keys_get(struct task_struct *target,
+				const struct user_regset *regset,
+				struct membuf to)
+{
+	long enabled_keys = ptrauth_get_enabled_keys(target);
+
+	if (IS_ERR_VALUE(enabled_keys))
+		return enabled_keys;
+
+	return membuf_write(&to, &enabled_keys, sizeof(enabled_keys));
+}
+
+static int pac_enabled_keys_set(struct task_struct *target,
+				const struct user_regset *regset,
+				unsigned int pos, unsigned int count,
+				const void *kbuf, const void __user *ubuf)
+{
+	int ret;
+	long enabled_keys = ptrauth_get_enabled_keys(target);
+
+	if (IS_ERR_VALUE(enabled_keys))
+		return enabled_keys;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &enabled_keys, 0,
+				 sizeof(long));
+	if (ret)
+		return ret;
+
+	return ptrauth_set_enabled_keys(target, PR_PAC_ENABLED_KEYS_MASK,
+					enabled_keys);
+}
+
+#ifdef CONFIG_CHECKPOINT_RESTORE
+static __uint128_t pac_key_to_user(const struct ptrauth_key *key)
+{
+	return (__uint128_t)key->hi << 64 | key->lo;
+}
+
+static struct ptrauth_key pac_key_from_user(__uint128_t ukey)
+{
+	struct ptrauth_key key = {
+		.lo = (unsigned long)ukey,
+		.hi = (unsigned long)(ukey >> 64),
+	};
+
+	return key;
+}
+
+static void pac_address_keys_to_user(struct user_pac_address_keys *ukeys,
+				     const struct ptrauth_keys_user *keys)
+{
+	ukeys->apiakey = pac_key_to_user(&keys->apia);
+	ukeys->apibkey = pac_key_to_user(&keys->apib);
+	ukeys->apdakey = pac_key_to_user(&keys->apda);
+	ukeys->apdbkey = pac_key_to_user(&keys->apdb);
+}
+
+static void pac_address_keys_from_user(struct ptrauth_keys_user *keys,
+				       const struct user_pac_address_keys *ukeys)
+{
+	keys->apia = pac_key_from_user(ukeys->apiakey);
+	keys->apib = pac_key_from_user(ukeys->apibkey);
+	keys->apda = pac_key_from_user(ukeys->apdakey);
+	keys->apdb = pac_key_from_user(ukeys->apdbkey);
+}
+
+static int pac_address_keys_get(struct task_struct *target,
+				const struct user_regset *regset,
+				struct membuf to)
+{
+	struct ptrauth_keys_user *keys = &target->thread.keys_user;
+	struct user_pac_address_keys user_keys;
+
+	if (!system_supports_address_auth())
+		return -EINVAL;
+
+	pac_address_keys_to_user(&user_keys, keys);
+
+	return membuf_write(&to, &user_keys, sizeof(user_keys));
+}
+
+static int pac_address_keys_set(struct task_struct *target,
+				const struct user_regset *regset,
+				unsigned int pos, unsigned int count,
+				const void *kbuf, const void __user *ubuf)
+{
+	struct ptrauth_keys_user *keys = &target->thread.keys_user;
+	struct user_pac_address_keys user_keys;
+	int ret;
+
+	if (!system_supports_address_auth())
+		return -EINVAL;
+
+	pac_address_keys_to_user(&user_keys, keys);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &user_keys, 0, -1);
+	if (ret)
+		return ret;
+	pac_address_keys_from_user(keys, &user_keys);
+
+	return 0;
+}
+
+static void pac_generic_keys_to_user(struct user_pac_generic_keys *ukeys,
+				     const struct ptrauth_keys_user *keys)
+{
+	ukeys->apgakey = pac_key_to_user(&keys->apga);
+}
+
+static void pac_generic_keys_from_user(struct ptrauth_keys_user *keys,
+				       const struct user_pac_generic_keys *ukeys)
+{
+	keys->apga = pac_key_from_user(ukeys->apgakey);
+}
+
+static int pac_generic_keys_get(struct task_struct *target,
+				const struct user_regset *regset,
+				struct membuf to)
+{
+	struct ptrauth_keys_user *keys = &target->thread.keys_user;
+	struct user_pac_generic_keys user_keys;
+
+	if (!system_supports_generic_auth())
+		return -EINVAL;
+
+	pac_generic_keys_to_user(&user_keys, keys);
+
+	return membuf_write(&to, &user_keys, sizeof(user_keys));
+}
+
+static int pac_generic_keys_set(struct task_struct *target,
+				const struct user_regset *regset,
+				unsigned int pos, unsigned int count,
+				const void *kbuf, const void __user *ubuf)
+{
+	struct ptrauth_keys_user *keys = &target->thread.keys_user;
+	struct user_pac_generic_keys user_keys;
+	int ret;
+
+	if (!system_supports_generic_auth())
+		return -EINVAL;
+
+	pac_generic_keys_to_user(&user_keys, keys);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 &user_keys, 0, -1);
+	if (ret)
+		return ret;
+	pac_generic_keys_from_user(keys, &user_keys);
+
+	return 0;
+}
+#endif /* CONFIG_CHECKPOINT_RESTORE */
+#endif /* CONFIG_ARM64_PTR_AUTH */
+
+#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
+static int tagged_addr_ctrl_get(struct task_struct *target,
+				const struct user_regset *regset,
+				struct membuf to)
+{
+	long ctrl = get_tagged_addr_ctrl(target);
+
+	if (IS_ERR_VALUE(ctrl))
+		return ctrl;
+
+	return membuf_write(&to, &ctrl, sizeof(ctrl));
+}
+
+static int tagged_addr_ctrl_set(struct task_struct *target, const struct
+				user_regset *regset, unsigned int pos,
+				unsigned int count, const void *kbuf, const
+				void __user *ubuf)
+{
+	int ret;
+	long ctrl;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl, 0, -1);
+	if (ret)
+		return ret;
+
+	return set_tagged_addr_ctrl(target, ctrl);
+}
+#endif
+
+enum aarch64_regset {
+	REGSET_GPR,
+	REGSET_FPR,
+	REGSET_TLS,
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	REGSET_HW_BREAK,
+	REGSET_HW_WATCH,
+#endif
+	REGSET_SYSTEM_CALL,
+#ifdef CONFIG_ARM64_SVE
+	REGSET_SVE,
+#endif
+#ifdef CONFIG_ARM64_SME
+	REGSET_SSVE,
+	REGSET_ZA,
+	REGSET_ZT,
+#endif
+#ifdef CONFIG_ARM64_PTR_AUTH
+	REGSET_PAC_MASK,
+	REGSET_PAC_ENABLED_KEYS,
+#ifdef CONFIG_CHECKPOINT_RESTORE
+	REGSET_PACA_KEYS,
+	REGSET_PACG_KEYS,
+#endif
+#endif
+#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
+	REGSET_TAGGED_ADDR_CTRL,
+#endif
+};
+
+static const struct user_regset aarch64_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = sizeof(struct user_pt_regs) / sizeof(u64),
+		.size = sizeof(u64),
+		.align = sizeof(u64),
+		.regset_get = gpr_get,
+		.set = gpr_set
+	},
+	[REGSET_FPR] = {
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(struct user_fpsimd_state) / sizeof(u32),
+		/*
+		 * We pretend we have 32-bit registers because the fpsr and
+		 * fpcr are 32-bits wide.
+		 */
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.active = fpr_active,
+		.regset_get = fpr_get,
+		.set = fpr_set
+	},
+	[REGSET_TLS] = {
+		.core_note_type = NT_ARM_TLS,
+		.n = 2,
+		.size = sizeof(void *),
+		.align = sizeof(void *),
+		.regset_get = tls_get,
+		.set = tls_set,
+	},
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	[REGSET_HW_BREAK] = {
+		.core_note_type = NT_ARM_HW_BREAK,
+		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.regset_get = hw_break_get,
+		.set = hw_break_set,
+	},
+	[REGSET_HW_WATCH] = {
+		.core_note_type = NT_ARM_HW_WATCH,
+		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.regset_get = hw_break_get,
+		.set = hw_break_set,
+	},
+#endif
+	[REGSET_SYSTEM_CALL] = {
+		.core_note_type = NT_ARM_SYSTEM_CALL,
+		.n = 1,
+		.size = sizeof(int),
+		.align = sizeof(int),
+		.regset_get = system_call_get,
+		.set = system_call_set,
+	},
+#ifdef CONFIG_ARM64_SVE
+	[REGSET_SVE] = { /* Scalable Vector Extension */
+		.core_note_type = NT_ARM_SVE,
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(SVE_VQ_MAX, SVE_PT_REGS_SVE),
+				  SVE_VQ_BYTES),
+		.size = SVE_VQ_BYTES,
+		.align = SVE_VQ_BYTES,
+		.regset_get = sve_get,
+		.set = sve_set,
+	},
+#endif
+#ifdef CONFIG_ARM64_SME
+	[REGSET_SSVE] = { /* Streaming mode SVE */
+		.core_note_type = NT_ARM_SSVE,
+		.n = DIV_ROUND_UP(SVE_PT_SIZE(SME_VQ_MAX, SVE_PT_REGS_SVE),
+				  SVE_VQ_BYTES),
+		.size = SVE_VQ_BYTES,
+		.align = SVE_VQ_BYTES,
+		.regset_get = ssve_get,
+		.set = ssve_set,
+	},
+	[REGSET_ZA] = { /* SME ZA */
+		.core_note_type = NT_ARM_ZA,
+		/*
+		 * ZA is a single register but it's variably sized and
+		 * the ptrace core requires that the size of any data
+		 * be an exact multiple of the configured register
+		 * size so report as though we had SVE_VQ_BYTES
+		 * registers. These values aren't exposed to
+		 * userspace.
+		 */
+		.n = DIV_ROUND_UP(ZA_PT_SIZE(SME_VQ_MAX), SVE_VQ_BYTES),
+		.size = SVE_VQ_BYTES,
+		.align = SVE_VQ_BYTES,
+		.regset_get = za_get,
+		.set = za_set,
+	},
+	[REGSET_ZT] = { /* SME ZT */
+		.core_note_type = NT_ARM_ZT,
+		.n = 1,
+		.size = ZT_SIG_REG_BYTES,
+		.align = sizeof(u64),
+		.regset_get = zt_get,
+		.set = zt_set,
+	},
+#endif
+#ifdef CONFIG_ARM64_PTR_AUTH
+	[REGSET_PAC_MASK] = {
+		.core_note_type = NT_ARM_PAC_MASK,
+		.n = sizeof(struct user_pac_mask) / sizeof(u64),
+		.size = sizeof(u64),
+		.align = sizeof(u64),
+		.regset_get = pac_mask_get,
+		/* this cannot be set dynamically */
+	},
+	[REGSET_PAC_ENABLED_KEYS] = {
+		.core_note_type = NT_ARM_PAC_ENABLED_KEYS,
+		.n = 1,
+		.size = sizeof(long),
+		.align = sizeof(long),
+		.regset_get = pac_enabled_keys_get,
+		.set = pac_enabled_keys_set,
+	},
+#ifdef CONFIG_CHECKPOINT_RESTORE
+	[REGSET_PACA_KEYS] = {
+		.core_note_type = NT_ARM_PACA_KEYS,
+		.n = sizeof(struct user_pac_address_keys) / sizeof(__uint128_t),
+		.size = sizeof(__uint128_t),
+		.align = sizeof(__uint128_t),
+		.regset_get = pac_address_keys_get,
+		.set = pac_address_keys_set,
+	},
+	[REGSET_PACG_KEYS] = {
+		.core_note_type = NT_ARM_PACG_KEYS,
+		.n = sizeof(struct user_pac_generic_keys) / sizeof(__uint128_t),
+		.size = sizeof(__uint128_t),
+		.align = sizeof(__uint128_t),
+		.regset_get = pac_generic_keys_get,
+		.set = pac_generic_keys_set,
+	},
+#endif
+#endif
+#ifdef CONFIG_ARM64_TAGGED_ADDR_ABI
+	[REGSET_TAGGED_ADDR_CTRL] = {
+		.core_note_type = NT_ARM_TAGGED_ADDR_CTRL,
+		.n = 1,
+		.size = sizeof(long),
+		.align = sizeof(long),
+		.regset_get = tagged_addr_ctrl_get,
+		.set = tagged_addr_ctrl_set,
+	},
+#endif
+};
+
+static const struct user_regset_view user_aarch64_view = {
+	.name = "aarch64", .e_machine = EM_AARCH64,
+	.regsets = aarch64_regsets, .n = ARRAY_SIZE(aarch64_regsets)
+};
+
+#ifdef CONFIG_COMPAT
+enum compat_regset {
+	REGSET_COMPAT_GPR,
+	REGSET_COMPAT_VFP,
+};
+
+static inline compat_ulong_t compat_get_user_reg(struct task_struct *task, int idx)
+{
+	struct pt_regs *regs = task_pt_regs(task);
+
+	switch (idx) {
+	case 15:
+		return regs->pc;
+	case 16:
+		return pstate_to_compat_psr(regs->pstate);
+	case 17:
+		return regs->orig_x0;
+	default:
+		return regs->regs[idx];
+	}
+}
+
+static int compat_gpr_get(struct task_struct *target,
+			  const struct user_regset *regset,
+			  struct membuf to)
+{
+	int i = 0;
+
+	while (to.left)
+		membuf_store(&to, compat_get_user_reg(target, i++));
+	return 0;
+}
+
+static int compat_gpr_set(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf)
+{
+	struct pt_regs newregs;
+	int ret = 0;
+	unsigned int i, start, num_regs;
+
+	/* Calculate the number of AArch32 registers contained in count */
+	num_regs = count / regset->size;
+
+	/* Convert pos into an register number */
+	start = pos / regset->size;
+
+	if (start + num_regs > regset->n)
+		return -EIO;
+
+	newregs = *task_pt_regs(target);
+
+	for (i = 0; i < num_regs; ++i) {
+		unsigned int idx = start + i;
+		compat_ulong_t reg;
+
+		if (kbuf) {
+			memcpy(&reg, kbuf, sizeof(reg));
+			kbuf += sizeof(reg);
+		} else {
+			ret = copy_from_user(&reg, ubuf, sizeof(reg));
+			if (ret) {
+				ret = -EFAULT;
+				break;
+			}
+
+			ubuf += sizeof(reg);
+		}
+
+		switch (idx) {
+		case 15:
+			newregs.pc = reg;
+			break;
+		case 16:
+			reg = compat_psr_to_pstate(reg);
+			newregs.pstate = reg;
+			break;
+		case 17:
+			newregs.orig_x0 = reg;
+			break;
+		default:
+			newregs.regs[idx] = reg;
+		}
+
+	}
+
+	if (valid_user_regs(&newregs.user_regs, target))
+		*task_pt_regs(target) = newregs;
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
+static int compat_vfp_get(struct task_struct *target,
+			  const struct user_regset *regset,
+			  struct membuf to)
+{
+	struct user_fpsimd_state *uregs;
+	compat_ulong_t fpscr;
+
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
+	uregs = &target->thread.uw.fpsimd_state;
+
+	if (target == current)
+		fpsimd_preserve_current_state();
+
+	/*
+	 * The VFP registers are packed into the fpsimd_state, so they all sit
+	 * nicely together for us. We just need to create the fpscr separately.
+	 */
+	membuf_write(&to, uregs, VFP_STATE_SIZE - sizeof(compat_ulong_t));
+	fpscr = (uregs->fpsr & VFP_FPSCR_STAT_MASK) |
+		(uregs->fpcr & VFP_FPSCR_CTRL_MASK);
+	return membuf_store(&to, fpscr);
+}
+
+static int compat_vfp_set(struct task_struct *target,
+			  const struct user_regset *regset,
+			  unsigned int pos, unsigned int count,
+			  const void *kbuf, const void __user *ubuf)
+{
+	struct user_fpsimd_state *uregs;
+	compat_ulong_t fpscr;
+	int ret, vregs_end_pos;
+
+	if (!system_supports_fpsimd())
+		return -EINVAL;
+
+	uregs = &target->thread.uw.fpsimd_state;
+
+	vregs_end_pos = VFP_STATE_SIZE - sizeof(compat_ulong_t);
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0,
+				 vregs_end_pos);
+
+	if (count && !ret) {
+		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fpscr,
+					 vregs_end_pos, VFP_STATE_SIZE);
+		if (!ret) {
+			uregs->fpsr = fpscr & VFP_FPSCR_STAT_MASK;
+			uregs->fpcr = fpscr & VFP_FPSCR_CTRL_MASK;
+		}
+	}
+
+	fpsimd_flush_task_state(target);
+	return ret;
+}
+
+static int compat_tls_get(struct task_struct *target,
+			  const struct user_regset *regset,
+			  struct membuf to)
+{
+	return membuf_store(&to, (compat_ulong_t)target->thread.uw.tp_value);
+}
+
+static int compat_tls_set(struct task_struct *target,
+			  const struct user_regset *regset, unsigned int pos,
+			  unsigned int count, const void *kbuf,
+			  const void __user *ubuf)
+{
+	int ret;
+	compat_ulong_t tls = target->thread.uw.tp_value;
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &tls, 0, -1);
+	if (ret)
+		return ret;
+
+	target->thread.uw.tp_value = tls;
+	return ret;
+}
+
+static const struct user_regset aarch32_regsets[] = {
+	[REGSET_COMPAT_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = COMPAT_ELF_NGREG,
+		.size = sizeof(compat_elf_greg_t),
+		.align = sizeof(compat_elf_greg_t),
+		.regset_get = compat_gpr_get,
+		.set = compat_gpr_set
+	},
+	[REGSET_COMPAT_VFP] = {
+		.core_note_type = NT_ARM_VFP,
+		.n = VFP_STATE_SIZE / sizeof(compat_ulong_t),
+		.size = sizeof(compat_ulong_t),
+		.align = sizeof(compat_ulong_t),
+		.active = fpr_active,
+		.regset_get = compat_vfp_get,
+		.set = compat_vfp_set
+	},
+};
+
+static const struct user_regset_view user_aarch32_view = {
+	.name = "aarch32", .e_machine = EM_ARM,
+	.regsets = aarch32_regsets, .n = ARRAY_SIZE(aarch32_regsets)
+};
+
+static const struct user_regset aarch32_ptrace_regsets[] = {
+	[REGSET_GPR] = {
+		.core_note_type = NT_PRSTATUS,
+		.n = COMPAT_ELF_NGREG,
+		.size = sizeof(compat_elf_greg_t),
+		.align = sizeof(compat_elf_greg_t),
+		.regset_get = compat_gpr_get,
+		.set = compat_gpr_set
+	},
+	[REGSET_FPR] = {
+		.core_note_type = NT_ARM_VFP,
+		.n = VFP_STATE_SIZE / sizeof(compat_ulong_t),
+		.size = sizeof(compat_ulong_t),
+		.align = sizeof(compat_ulong_t),
+		.regset_get = compat_vfp_get,
+		.set = compat_vfp_set
+	},
+	[REGSET_TLS] = {
+		.core_note_type = NT_ARM_TLS,
+		.n = 1,
+		.size = sizeof(compat_ulong_t),
+		.align = sizeof(compat_ulong_t),
+		.regset_get = compat_tls_get,
+		.set = compat_tls_set,
+	},
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	[REGSET_HW_BREAK] = {
+		.core_note_type = NT_ARM_HW_BREAK,
+		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.regset_get = hw_break_get,
+		.set = hw_break_set,
+	},
+	[REGSET_HW_WATCH] = {
+		.core_note_type = NT_ARM_HW_WATCH,
+		.n = sizeof(struct user_hwdebug_state) / sizeof(u32),
+		.size = sizeof(u32),
+		.align = sizeof(u32),
+		.regset_get = hw_break_get,
+		.set = hw_break_set,
+	},
+#endif
+	[REGSET_SYSTEM_CALL] = {
+		.core_note_type = NT_ARM_SYSTEM_CALL,
+		.n = 1,
+		.size = sizeof(int),
+		.align = sizeof(int),
+		.regset_get = system_call_get,
+		.set = system_call_set,
+	},
+};
+
+static const struct user_regset_view user_aarch32_ptrace_view = {
+	.name = "aarch32", .e_machine = EM_ARM,
+	.regsets = aarch32_ptrace_regsets, .n = ARRAY_SIZE(aarch32_ptrace_regsets)
+};
+
+static int compat_ptrace_read_user(struct task_struct *tsk, compat_ulong_t off,
+				   compat_ulong_t __user *ret)
+{
+	compat_ulong_t tmp;
+
+	if (off & 3)
+		return -EIO;
+
+	if (off == COMPAT_PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == COMPAT_PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == COMPAT_PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(compat_elf_gregset_t))
+		tmp = compat_get_user_reg(tsk, off >> 2);
+	else if (off >= COMPAT_USER_SZ)
+		return -EIO;
+	else
+		tmp = 0;
+
+	return put_user(tmp, ret);
+}
+
+static int compat_ptrace_write_user(struct task_struct *tsk, compat_ulong_t off,
+				    compat_ulong_t val)
+{
+	struct pt_regs newregs = *task_pt_regs(tsk);
+	unsigned int idx = off / 4;
+
+	if (off & 3 || off >= COMPAT_USER_SZ)
+		return -EIO;
+
+	if (off >= sizeof(compat_elf_gregset_t))
+		return 0;
+
+	switch (idx) {
+	case 15:
+		newregs.pc = val;
+		break;
+	case 16:
+		newregs.pstate = compat_psr_to_pstate(val);
+		break;
+	case 17:
+		newregs.orig_x0 = val;
+		break;
+	default:
+		newregs.regs[idx] = val;
+	}
+
+	if (!valid_user_regs(&newregs.user_regs, tsk))
+		return -EINVAL;
+
+	*task_pt_regs(tsk) = newregs;
+	return 0;
+}
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+/*
+ * Convert a virtual register number into an index for a thread_info
+ * breakpoint array. Breakpoints are identified using positive numbers
+ * whilst watchpoints are negative. The registers are laid out as pairs
+ * of (address, control), each pair mapping to a unique hw_breakpoint struct.
+ * Register 0 is reserved for describing resource information.
+ */
+static int compat_ptrace_hbp_num_to_idx(compat_long_t num)
+{
+	return (abs(num) - 1) >> 1;
+}
+
+static int compat_ptrace_hbp_get_resource_info(u32 *kdata)
+{
+	u8 num_brps, num_wrps, debug_arch, wp_len;
+	u32 reg = 0;
+
+	num_brps	= hw_breakpoint_slots(TYPE_INST);
+	num_wrps	= hw_breakpoint_slots(TYPE_DATA);
+
+	debug_arch	= debug_monitors_arch();
+	wp_len		= 8;
+	reg		|= debug_arch;
+	reg		<<= 8;
+	reg		|= wp_len;
+	reg		<<= 8;
+	reg		|= num_wrps;
+	reg		<<= 8;
+	reg		|= num_brps;
+
+	*kdata = reg;
+	return 0;
+}
+
+static int compat_ptrace_hbp_get(unsigned int note_type,
+				 struct task_struct *tsk,
+				 compat_long_t num,
+				 u32 *kdata)
+{
+	u64 addr = 0;
+	u32 ctrl = 0;
+
+	int err, idx = compat_ptrace_hbp_num_to_idx(num);
+
+	if (num & 1) {
+		err = ptrace_hbp_get_addr(note_type, tsk, idx, &addr);
+		*kdata = (u32)addr;
+	} else {
+		err = ptrace_hbp_get_ctrl(note_type, tsk, idx, &ctrl);
+		*kdata = ctrl;
+	}
+
+	return err;
+}
+
+static int compat_ptrace_hbp_set(unsigned int note_type,
+				 struct task_struct *tsk,
+				 compat_long_t num,
+				 u32 *kdata)
+{
+	u64 addr;
+	u32 ctrl;
+
+	int err, idx = compat_ptrace_hbp_num_to_idx(num);
+
+	if (num & 1) {
+		addr = *kdata;
+		err = ptrace_hbp_set_addr(note_type, tsk, idx, addr);
+	} else {
+		ctrl = *kdata;
+		err = ptrace_hbp_set_ctrl(note_type, tsk, idx, ctrl);
+	}
+
+	return err;
+}
+
+static int compat_ptrace_gethbpregs(struct task_struct *tsk, compat_long_t num,
+				    compat_ulong_t __user *data)
+{
+	int ret;
+	u32 kdata;
+
+	/* Watchpoint */
+	if (num < 0) {
+		ret = compat_ptrace_hbp_get(NT_ARM_HW_WATCH, tsk, num, &kdata);
+	/* Resource info */
+	} else if (num == 0) {
+		ret = compat_ptrace_hbp_get_resource_info(&kdata);
+	/* Breakpoint */
+	} else {
+		ret = compat_ptrace_hbp_get(NT_ARM_HW_BREAK, tsk, num, &kdata);
+	}
+
+	if (!ret)
+		ret = put_user(kdata, data);
+
+	return ret;
+}
+
+static int compat_ptrace_sethbpregs(struct task_struct *tsk, compat_long_t num,
+				    compat_ulong_t __user *data)
+{
+	int ret;
+	u32 kdata = 0;
+
+	if (num == 0)
+		return 0;
+
+	ret = get_user(kdata, data);
+	if (ret)
+		return ret;
+
+	if (num < 0)
+		ret = compat_ptrace_hbp_set(NT_ARM_HW_WATCH, tsk, num, &kdata);
+	else
+		ret = compat_ptrace_hbp_set(NT_ARM_HW_BREAK, tsk, num, &kdata);
+
+	return ret;
+}
+#endif	/* CONFIG_HAVE_HW_BREAKPOINT */
+
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+			compat_ulong_t caddr, compat_ulong_t cdata)
+{
+	unsigned long addr = caddr;
+	unsigned long data = cdata;
+	void __user *datap = compat_ptr(data);
+	int ret;
+
+	switch (request) {
+		case PTRACE_PEEKUSR:
+			ret = compat_ptrace_read_user(child, addr, datap);
+			break;
+
+		case PTRACE_POKEUSR:
+			ret = compat_ptrace_write_user(child, addr, data);
+			break;
+
+		case COMPAT_PTRACE_GETREGS:
+			ret = copy_regset_to_user(child,
+						  &user_aarch32_view,
+						  REGSET_COMPAT_GPR,
+						  0, sizeof(compat_elf_gregset_t),
+						  datap);
+			break;
+
+		case COMPAT_PTRACE_SETREGS:
+			ret = copy_regset_from_user(child,
+						    &user_aarch32_view,
+						    REGSET_COMPAT_GPR,
+						    0, sizeof(compat_elf_gregset_t),
+						    datap);
+			break;
+
+		case COMPAT_PTRACE_GET_THREAD_AREA:
+			ret = put_user((compat_ulong_t)child->thread.uw.tp_value,
+				       (compat_ulong_t __user *)datap);
+			break;
+
+		case COMPAT_PTRACE_SET_SYSCALL:
+			task_pt_regs(child)->syscallno = data;
+			ret = 0;
+			break;
+
+		case COMPAT_PTRACE_GETVFPREGS:
+			ret = copy_regset_to_user(child,
+						  &user_aarch32_view,
+						  REGSET_COMPAT_VFP,
+						  0, VFP_STATE_SIZE,
+						  datap);
+			break;
+
+		case COMPAT_PTRACE_SETVFPREGS:
+			ret = copy_regset_from_user(child,
+						    &user_aarch32_view,
+						    REGSET_COMPAT_VFP,
+						    0, VFP_STATE_SIZE,
+						    datap);
+			break;
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+		case COMPAT_PTRACE_GETHBPREGS:
+			ret = compat_ptrace_gethbpregs(child, addr, datap);
+			break;
+
+		case COMPAT_PTRACE_SETHBPREGS:
+			ret = compat_ptrace_sethbpregs(child, addr, datap);
+			break;
+#endif
+
+		default:
+			ret = compat_ptrace_request(child, request, addr,
+						    data);
+			break;
+	}
+
+	return ret;
+}
+#endif /* CONFIG_COMPAT */
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+#ifdef CONFIG_COMPAT
+	/*
+	 * Core dumping of 32-bit tasks or compat ptrace requests must use the
+	 * user_aarch32_view compatible with arm32. Native ptrace requests on
+	 * 32-bit children use an extended user_aarch32_ptrace_view to allow
+	 * access to the TLS register.
+	 */
+	if (is_compat_task())
+		return &user_aarch32_view;
+	else if (is_compat_thread(task_thread_info(task)))
+		return &user_aarch32_ptrace_view;
+#endif
+	return &user_aarch64_view;
+}
+
+long arch_ptrace(struct task_struct *child, long request,
+		 unsigned long addr, unsigned long data)
+{
+	switch (request) {
+	case PTRACE_PEEKMTETAGS:
+	case PTRACE_POKEMTETAGS:
+		return mte_ptrace_copy_tags(child, request, addr, data);
+	}
+
+	return ptrace_request(child, request, addr, data);
+}
+
+enum ptrace_syscall_dir {
+	PTRACE_SYSCALL_ENTER = 0,
+	PTRACE_SYSCALL_EXIT,
+};
+
+static void report_syscall(struct pt_regs *regs, enum ptrace_syscall_dir dir)
+{
+	int regno;
+	unsigned long saved_reg;
+
+	/*
+	 * We have some ABI weirdness here in the way that we handle syscall
+	 * exit stops because we indicate whether or not the stop has been
+	 * signalled from syscall entry or syscall exit by clobbering a general
+	 * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee
+	 * and restoring its old value after the stop. This means that:
+	 *
+	 * - Any writes by the tracer to this register during the stop are
+	 *   ignored/discarded.
+	 *
+	 * - The actual value of the register is not available during the stop,
+	 *   so the tracer cannot save it and restore it later.
+	 *
+	 * - Syscall stops behave differently to seccomp and pseudo-step traps
+	 *   (the latter do not nobble any registers).
+	 */
+	regno = (is_compat_task() ? 12 : 7);
+	saved_reg = regs->regs[regno];
+	regs->regs[regno] = dir;
+
+	if (dir == PTRACE_SYSCALL_ENTER) {
+		if (ptrace_report_syscall_entry(regs))
+			forget_syscall(regs);
+		regs->regs[regno] = saved_reg;
+	} else if (!test_thread_flag(TIF_SINGLESTEP)) {
+		ptrace_report_syscall_exit(regs, 0);
+		regs->regs[regno] = saved_reg;
+	} else {
+		regs->regs[regno] = saved_reg;
+
+		/*
+		 * Signal a pseudo-step exception since we are stepping but
+		 * tracer modifications to the registers may have rewound the
+		 * state machine.
+		 */
+		ptrace_report_syscall_exit(regs, 1);
+	}
+}
+
+int syscall_trace_enter(struct pt_regs *regs)
+{
+	unsigned long flags = read_thread_flags();
+
+	if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) {
+		report_syscall(regs, PTRACE_SYSCALL_ENTER);
+		if (flags & _TIF_SYSCALL_EMU)
+			return NO_SYSCALL;
+	}
+
+	/* Do the secure computing after ptrace; failures should be fast. */
+	if (secure_computing() == -1)
+		return NO_SYSCALL;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, regs->syscallno);
+
+	audit_syscall_entry(regs->syscallno, regs->orig_x0, regs->regs[1],
+			    regs->regs[2], regs->regs[3]);
+
+	return regs->syscallno;
+}
+
+void syscall_trace_exit(struct pt_regs *regs)
+{
+	unsigned long flags = read_thread_flags();
+
+	audit_syscall_exit(regs);
+
+	if (flags & _TIF_SYSCALL_TRACEPOINT)
+		trace_sys_exit(regs, syscall_get_return_value(current, regs));
+
+	if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP))
+		report_syscall(regs, PTRACE_SYSCALL_EXIT);
+
+	rseq_syscall(regs);
+}
+
+/*
+ * SPSR_ELx bits which are always architecturally RES0 per ARM DDI 0487D.a.
+ * We permit userspace to set SSBS (AArch64 bit 12, AArch32 bit 23) which is
+ * not described in ARM DDI 0487D.a.
+ * We treat PAN and UAO as RES0 bits, as they are meaningless at EL0, and may
+ * be allocated an EL0 meaning in future.
+ * Userspace cannot use these until they have an architectural meaning.
+ * Note that this follows the SPSR_ELx format, not the AArch32 PSR format.
+ * We also reserve IL for the kernel; SS is handled dynamically.
+ */
+#define SPSR_EL1_AARCH64_RES0_BITS \
+	(GENMASK_ULL(63, 32) | GENMASK_ULL(27, 26) | GENMASK_ULL(23, 22) | \
+	 GENMASK_ULL(20, 13) | GENMASK_ULL(5, 5))
+#define SPSR_EL1_AARCH32_RES0_BITS \
+	(GENMASK_ULL(63, 32) | GENMASK_ULL(22, 22) | GENMASK_ULL(20, 20))
+
+static int valid_compat_regs(struct user_pt_regs *regs)
+{
+	regs->pstate &= ~SPSR_EL1_AARCH32_RES0_BITS;
+
+	if (!system_supports_mixed_endian_el0()) {
+		if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+			regs->pstate |= PSR_AA32_E_BIT;
+		else
+			regs->pstate &= ~PSR_AA32_E_BIT;
+	}
+
+	if (user_mode(regs) && (regs->pstate & PSR_MODE32_BIT) &&
+	    (regs->pstate & PSR_AA32_A_BIT) == 0 &&
+	    (regs->pstate & PSR_AA32_I_BIT) == 0 &&
+	    (regs->pstate & PSR_AA32_F_BIT) == 0) {
+		return 1;
+	}
+
+	/*
+	 * Force PSR to a valid 32-bit EL0t, preserving the same bits as
+	 * arch/arm.
+	 */
+	regs->pstate &= PSR_AA32_N_BIT | PSR_AA32_Z_BIT |
+			PSR_AA32_C_BIT | PSR_AA32_V_BIT |
+			PSR_AA32_Q_BIT | PSR_AA32_IT_MASK |
+			PSR_AA32_GE_MASK | PSR_AA32_E_BIT |
+			PSR_AA32_T_BIT;
+	regs->pstate |= PSR_MODE32_BIT;
+
+	return 0;
+}
+
+static int valid_native_regs(struct user_pt_regs *regs)
+{
+	regs->pstate &= ~SPSR_EL1_AARCH64_RES0_BITS;
+
+	if (user_mode(regs) && !(regs->pstate & PSR_MODE32_BIT) &&
+	    (regs->pstate & PSR_D_BIT) == 0 &&
+	    (regs->pstate & PSR_A_BIT) == 0 &&
+	    (regs->pstate & PSR_I_BIT) == 0 &&
+	    (regs->pstate & PSR_F_BIT) == 0) {
+		return 1;
+	}
+
+	/* Force PSR to a valid 64-bit EL0t */
+	regs->pstate &= PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT | PSR_V_BIT;
+
+	return 0;
+}
+
+/*
+ * Are the current registers suitable for user mode? (used to maintain
+ * security in signal handlers)
+ */
+int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task)
+{
+	/* https://lore.kernel.org/lkml/20191118131525.GA4180@willie-the-truck */
+	user_regs_reset_single_step(regs, task);
+
+	if (is_compat_thread(task_thread_info(task)))
+		return valid_compat_regs(regs);
+	else
+		return valid_native_regs(regs);
+}
diff --git a/arch/arm64/kernel/reloc_test_core.c b/arch/arm64/kernel/reloc_test_core.c
new file mode 100644
index 000000000..99f2ffe9f
--- /dev/null
+++ b/arch/arm64/kernel/reloc_test_core.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/module.h>
+
+int sym64_rel;
+
+#define SYM64_ABS_VAL		0xffff880000cccccc
+#define SYM32_ABS_VAL		0xf800cccc
+#define SYM16_ABS_VAL		0xf8cc
+
+#define __SET_ABS(name, val)	asm(".globl " #name "; .set "#name ", " #val)
+#define SET_ABS(name, val)	__SET_ABS(name, val)
+
+SET_ABS(sym64_abs, SYM64_ABS_VAL);
+SET_ABS(sym32_abs, SYM32_ABS_VAL);
+SET_ABS(sym16_abs, SYM16_ABS_VAL);
+
+asmlinkage u64 absolute_data64(void);
+asmlinkage u64 absolute_data32(void);
+asmlinkage u64 absolute_data16(void);
+asmlinkage u64 signed_movw(void);
+asmlinkage u64 unsigned_movw(void);
+asmlinkage u64 relative_adrp(void);
+asmlinkage u64 relative_adrp_far(void);
+asmlinkage u64 relative_adr(void);
+asmlinkage u64 relative_data64(void);
+asmlinkage u64 relative_data32(void);
+asmlinkage u64 relative_data16(void);
+
+static struct {
+	char	name[32];
+	u64	(*f)(void);
+	u64	expect;
+} const funcs[] = {
+	{ "R_AARCH64_ABS64",		absolute_data64, UL(SYM64_ABS_VAL) },
+	{ "R_AARCH64_ABS32",		absolute_data32, UL(SYM32_ABS_VAL) },
+	{ "R_AARCH64_ABS16",		absolute_data16, UL(SYM16_ABS_VAL) },
+	{ "R_AARCH64_MOVW_SABS_Gn",	signed_movw, UL(SYM64_ABS_VAL) },
+	{ "R_AARCH64_MOVW_UABS_Gn",	unsigned_movw, UL(SYM64_ABS_VAL) },
+	{ "R_AARCH64_ADR_PREL_PG_HI21",	relative_adrp, (u64)&sym64_rel },
+	{ "R_AARCH64_ADR_PREL_PG_HI21",	relative_adrp_far, (u64)&memstart_addr },
+	{ "R_AARCH64_ADR_PREL_LO21",	relative_adr, (u64)&sym64_rel },
+	{ "R_AARCH64_PREL64",		relative_data64, (u64)&sym64_rel },
+	{ "R_AARCH64_PREL32",		relative_data32, (u64)&sym64_rel },
+	{ "R_AARCH64_PREL16",		relative_data16, (u64)&sym64_rel },
+};
+
+static int __init reloc_test_init(void)
+{
+	int i;
+
+	pr_info("Relocation test:\n");
+	pr_info("-------------------------------------------------------\n");
+
+	for (i = 0; i < ARRAY_SIZE(funcs); i++) {
+		u64 ret = funcs[i].f();
+
+		pr_info("%-31s 0x%016llx %s\n", funcs[i].name, ret,
+			ret == funcs[i].expect ? "pass" : "fail");
+		if (ret != funcs[i].expect)
+			pr_err("Relocation failed, expected 0x%016llx, not 0x%016llx\n",
+			       funcs[i].expect, ret);
+	}
+	return 0;
+}
+
+static void __exit reloc_test_exit(void)
+{
+}
+
+module_init(reloc_test_init);
+module_exit(reloc_test_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm64/kernel/reloc_test_syms.S b/arch/arm64/kernel/reloc_test_syms.S
new file mode 100644
index 000000000..c50f45fa2
--- /dev/null
+++ b/arch/arm64/kernel/reloc_test_syms.S
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+
+SYM_FUNC_START(absolute_data64)
+	ldr	x0, 0f
+	ret
+0:	.quad	sym64_abs
+SYM_FUNC_END(absolute_data64)
+
+SYM_FUNC_START(absolute_data32)
+	ldr	w0, 0f
+	ret
+0:	.long	sym32_abs
+SYM_FUNC_END(absolute_data32)
+
+SYM_FUNC_START(absolute_data16)
+	adr	x0, 0f
+	ldrh	w0, [x0]
+	ret
+0:	.short	sym16_abs, 0
+SYM_FUNC_END(absolute_data16)
+
+SYM_FUNC_START(signed_movw)
+	movz	x0, #:abs_g2_s:sym64_abs
+	movk	x0, #:abs_g1_nc:sym64_abs
+	movk	x0, #:abs_g0_nc:sym64_abs
+	ret
+SYM_FUNC_END(signed_movw)
+
+SYM_FUNC_START(unsigned_movw)
+	movz	x0, #:abs_g3:sym64_abs
+	movk	x0, #:abs_g2_nc:sym64_abs
+	movk	x0, #:abs_g1_nc:sym64_abs
+	movk	x0, #:abs_g0_nc:sym64_abs
+	ret
+SYM_FUNC_END(unsigned_movw)
+
+	.align	12
+	.space	0xff8
+SYM_FUNC_START(relative_adrp)
+	adrp	x0, sym64_rel
+	add	x0, x0, #:lo12:sym64_rel
+	ret
+SYM_FUNC_END(relative_adrp)
+
+	.align	12
+	.space	0xffc
+SYM_FUNC_START(relative_adrp_far)
+	adrp	x0, memstart_addr
+	add	x0, x0, #:lo12:memstart_addr
+	ret
+SYM_FUNC_END(relative_adrp_far)
+
+SYM_FUNC_START(relative_adr)
+	adr	x0, sym64_rel
+	ret
+SYM_FUNC_END(relative_adr)
+
+SYM_FUNC_START(relative_data64)
+	adr	x1, 0f
+	ldr	x0, [x1]
+	add	x0, x0, x1
+	ret
+0:	.quad	sym64_rel - .
+SYM_FUNC_END(relative_data64)
+
+SYM_FUNC_START(relative_data32)
+	adr	x1, 0f
+	ldr	w0, [x1]
+	add	x0, x0, x1
+	ret
+0:	.long	sym64_rel - .
+SYM_FUNC_END(relative_data32)
+
+SYM_FUNC_START(relative_data16)
+	adr	x1, 0f
+	ldrsh	w0, [x1]
+	add	x0, x0, x1
+	ret
+0:	.short	sym64_rel - ., 0
+SYM_FUNC_END(relative_data16)
diff --git a/arch/arm64/kernel/relocate_kernel.S b/arch/arm64/kernel/relocate_kernel.S
new file mode 100644
index 000000000..413f899e4
--- /dev/null
+++ b/arch/arm64/kernel/relocate_kernel.S
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * kexec for arm64
+ *
+ * Copyright (C) Linaro.
+ * Copyright (C) Huawei Futurewei Technologies.
+ * Copyright (C) 2021, Microsoft Corporation.
+ * Pasha Tatashin <pasha.tatashin@soleen.com>
+ */
+
+#include <linux/kexec.h>
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/kexec.h>
+#include <asm/page.h>
+#include <asm/sysreg.h>
+#include <asm/virt.h>
+
+.macro turn_off_mmu tmp1, tmp2
+	mov_q   \tmp1, INIT_SCTLR_EL1_MMU_OFF
+	pre_disable_mmu_workaround
+	msr	sctlr_el1, \tmp1
+	isb
+.endm
+
+.section    ".kexec_relocate.text", "ax"
+/*
+ * arm64_relocate_new_kernel - Put a 2nd stage image in place and boot it.
+ *
+ * The memory that the old kernel occupies may be overwritten when copying the
+ * new image to its final location.  To assure that the
+ * arm64_relocate_new_kernel routine which does that copy is not overwritten,
+ * all code and data needed by arm64_relocate_new_kernel must be between the
+ * symbols arm64_relocate_new_kernel and arm64_relocate_new_kernel_end.  The
+ * machine_kexec() routine will copy arm64_relocate_new_kernel to the kexec
+ * safe memory that has been set up to be preserved during the copy operation.
+ */
+SYM_CODE_START(arm64_relocate_new_kernel)
+	/*
+	 * The kimage structure isn't allocated specially and may be clobbered
+	 * during relocation. We must load any values we need from it prior to
+	 * any relocation occurring.
+	 */
+	ldr	x28, [x0, #KIMAGE_START]
+	ldr	x27, [x0, #KIMAGE_ARCH_EL2_VECTORS]
+	ldr	x26, [x0, #KIMAGE_ARCH_DTB_MEM]
+
+	/* Setup the list loop variables. */
+	ldr	x18, [x0, #KIMAGE_ARCH_ZERO_PAGE] /* x18 = zero page for BBM */
+	ldr	x17, [x0, #KIMAGE_ARCH_TTBR1]	/* x17 = linear map copy */
+	ldr	x16, [x0, #KIMAGE_HEAD]		/* x16 = kimage_head */
+	ldr	x22, [x0, #KIMAGE_ARCH_PHYS_OFFSET]	/* x22 phys_offset */
+	raw_dcache_line_size x15, x1		/* x15 = dcache line size */
+	break_before_make_ttbr_switch	x18, x17, x1, x2 /* set linear map */
+.Lloop:
+	and	x12, x16, PAGE_MASK		/* x12 = addr */
+	sub	x12, x12, x22			/* Convert x12 to virt */
+	/* Test the entry flags. */
+.Ltest_source:
+	tbz	x16, IND_SOURCE_BIT, .Ltest_indirection
+
+	/* Invalidate dest page to PoC. */
+	mov	x19, x13
+	copy_page x13, x12, x1, x2, x3, x4, x5, x6, x7, x8
+	add	x1, x19, #PAGE_SIZE
+	dcache_by_myline_op civac, sy, x19, x1, x15, x20
+	b	.Lnext
+.Ltest_indirection:
+	tbz	x16, IND_INDIRECTION_BIT, .Ltest_destination
+	mov	x14, x12			/* ptr = addr */
+	b	.Lnext
+.Ltest_destination:
+	tbz	x16, IND_DESTINATION_BIT, .Lnext
+	mov	x13, x12			/* dest = addr */
+.Lnext:
+	ldr	x16, [x14], #8			/* entry = *ptr++ */
+	tbz	x16, IND_DONE_BIT, .Lloop	/* while (!(entry & DONE)) */
+	/* wait for writes from copy_page to finish */
+	dsb	nsh
+	ic	iallu
+	dsb	nsh
+	isb
+	turn_off_mmu x12, x13
+
+	/* Start new image. */
+	cbz	x27, .Lel1
+	mov	x1, x28				/* kernel entry point */
+	mov	x2, x26				/* dtb address */
+	mov	x3, xzr
+	mov	x4, xzr
+	mov     x0, #HVC_SOFT_RESTART
+	hvc	#0				/* Jumps from el2 */
+.Lel1:
+	mov	x0, x26				/* dtb address */
+	mov	x1, xzr
+	mov	x2, xzr
+	mov	x3, xzr
+	br	x28				/* Jumps from el1 */
+SYM_CODE_END(arm64_relocate_new_kernel)
diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c
new file mode 100644
index 000000000..68330017d
--- /dev/null
+++ b/arch/arm64/kernel/return_address.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/kernel/return_address.c
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ */
+
+#include <linux/export.h>
+#include <linux/ftrace.h>
+#include <linux/kprobes.h>
+#include <linux/stacktrace.h>
+
+#include <asm/stack_pointer.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static bool save_return_addr(void *d, unsigned long pc)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)pc;
+		return false;
+	} else {
+		--data->level;
+		return true;
+	}
+}
+NOKPROBE_SYMBOL(save_return_addr);
+
+void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+
+	data.level = level + 2;
+	data.addr = NULL;
+
+	arch_stack_walk(save_return_addr, &data, current, NULL);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+}
+EXPORT_SYMBOL_GPL(return_address);
+NOKPROBE_SYMBOL(return_address);
diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
new file mode 100644
index 000000000..255d12f88
--- /dev/null
+++ b/arch/arm64/kernel/sdei.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2017 Arm Ltd.
+#define pr_fmt(fmt) "sdei: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/arm_sdei.h>
+#include <linux/hardirq.h>
+#include <linux/irqflags.h>
+#include <linux/sched/task_stack.h>
+#include <linux/scs.h>
+#include <linux/uaccess.h>
+
+#include <asm/alternative.h>
+#include <asm/exception.h>
+#include <asm/kprobes.h>
+#include <asm/mmu.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
+#include <asm/stacktrace.h>
+#include <asm/sysreg.h>
+#include <asm/vmap_stack.h>
+
+unsigned long sdei_exit_mode;
+
+/*
+ * VMAP'd stacks checking for stack overflow on exception using sp as a scratch
+ * register, meaning SDEI has to switch to its own stack. We need two stacks as
+ * a critical event may interrupt a normal event that has just taken a
+ * synchronous exception, and is using sp as scratch register. For a critical
+ * event interrupting a normal event, we can't reliably tell if we were on the
+ * sdei stack.
+ * For now, we allocate stacks when the driver is probed.
+ */
+DECLARE_PER_CPU(unsigned long *, sdei_stack_normal_ptr);
+DECLARE_PER_CPU(unsigned long *, sdei_stack_critical_ptr);
+
+#ifdef CONFIG_VMAP_STACK
+DEFINE_PER_CPU(unsigned long *, sdei_stack_normal_ptr);
+DEFINE_PER_CPU(unsigned long *, sdei_stack_critical_ptr);
+#endif
+
+DECLARE_PER_CPU(unsigned long *, sdei_shadow_call_stack_normal_ptr);
+DECLARE_PER_CPU(unsigned long *, sdei_shadow_call_stack_critical_ptr);
+
+#ifdef CONFIG_SHADOW_CALL_STACK
+DEFINE_PER_CPU(unsigned long *, sdei_shadow_call_stack_normal_ptr);
+DEFINE_PER_CPU(unsigned long *, sdei_shadow_call_stack_critical_ptr);
+#endif
+
+DEFINE_PER_CPU(struct sdei_registered_event *, sdei_active_normal_event);
+DEFINE_PER_CPU(struct sdei_registered_event *, sdei_active_critical_event);
+
+static void _free_sdei_stack(unsigned long * __percpu *ptr, int cpu)
+{
+	unsigned long *p;
+
+	p = per_cpu(*ptr, cpu);
+	if (p) {
+		per_cpu(*ptr, cpu) = NULL;
+		vfree(p);
+	}
+}
+
+static void free_sdei_stacks(void)
+{
+	int cpu;
+
+	if (!IS_ENABLED(CONFIG_VMAP_STACK))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		_free_sdei_stack(&sdei_stack_normal_ptr, cpu);
+		_free_sdei_stack(&sdei_stack_critical_ptr, cpu);
+	}
+}
+
+static int _init_sdei_stack(unsigned long * __percpu *ptr, int cpu)
+{
+	unsigned long *p;
+
+	p = arch_alloc_vmap_stack(SDEI_STACK_SIZE, cpu_to_node(cpu));
+	if (!p)
+		return -ENOMEM;
+	per_cpu(*ptr, cpu) = p;
+
+	return 0;
+}
+
+static int init_sdei_stacks(void)
+{
+	int cpu;
+	int err = 0;
+
+	if (!IS_ENABLED(CONFIG_VMAP_STACK))
+		return 0;
+
+	for_each_possible_cpu(cpu) {
+		err = _init_sdei_stack(&sdei_stack_normal_ptr, cpu);
+		if (err)
+			break;
+		err = _init_sdei_stack(&sdei_stack_critical_ptr, cpu);
+		if (err)
+			break;
+	}
+
+	if (err)
+		free_sdei_stacks();
+
+	return err;
+}
+
+static void _free_sdei_scs(unsigned long * __percpu *ptr, int cpu)
+{
+	void *s;
+
+	s = per_cpu(*ptr, cpu);
+	if (s) {
+		per_cpu(*ptr, cpu) = NULL;
+		scs_free(s);
+	}
+}
+
+static void free_sdei_scs(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		_free_sdei_scs(&sdei_shadow_call_stack_normal_ptr, cpu);
+		_free_sdei_scs(&sdei_shadow_call_stack_critical_ptr, cpu);
+	}
+}
+
+static int _init_sdei_scs(unsigned long * __percpu *ptr, int cpu)
+{
+	void *s;
+
+	s = scs_alloc(cpu_to_node(cpu));
+	if (!s)
+		return -ENOMEM;
+	per_cpu(*ptr, cpu) = s;
+
+	return 0;
+}
+
+static int init_sdei_scs(void)
+{
+	int cpu;
+	int err = 0;
+
+	if (!scs_is_enabled())
+		return 0;
+
+	for_each_possible_cpu(cpu) {
+		err = _init_sdei_scs(&sdei_shadow_call_stack_normal_ptr, cpu);
+		if (err)
+			break;
+		err = _init_sdei_scs(&sdei_shadow_call_stack_critical_ptr, cpu);
+		if (err)
+			break;
+	}
+
+	if (err)
+		free_sdei_scs();
+
+	return err;
+}
+
+unsigned long sdei_arch_get_entry_point(int conduit)
+{
+	/*
+	 * SDEI works between adjacent exception levels. If we booted at EL1 we
+	 * assume a hypervisor is marshalling events. If we booted at EL2 and
+	 * dropped to EL1 because we don't support VHE, then we can't support
+	 * SDEI.
+	 */
+	if (is_hyp_nvhe()) {
+		pr_err("Not supported on this hardware/boot configuration\n");
+		goto out_err;
+	}
+
+	if (init_sdei_stacks())
+		goto out_err;
+
+	if (init_sdei_scs())
+		goto out_err_free_stacks;
+
+	sdei_exit_mode = (conduit == SMCCC_CONDUIT_HVC) ? SDEI_EXIT_HVC : SDEI_EXIT_SMC;
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	if (arm64_kernel_unmapped_at_el0()) {
+		unsigned long offset;
+
+		offset = (unsigned long)__sdei_asm_entry_trampoline -
+			 (unsigned long)__entry_tramp_text_start;
+		return TRAMP_VALIAS + offset;
+	} else
+#endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
+		return (unsigned long)__sdei_asm_handler;
+
+out_err_free_stacks:
+	free_sdei_stacks();
+out_err:
+	return 0;
+}
+
+/*
+ * do_sdei_event() returns one of:
+ *  SDEI_EV_HANDLED -  success, return to the interrupted context.
+ *  SDEI_EV_FAILED  -  failure, return this error code to firmare.
+ *  virtual-address -  success, return to this address.
+ */
+unsigned long __kprobes do_sdei_event(struct pt_regs *regs,
+				      struct sdei_registered_event *arg)
+{
+	u32 mode;
+	int i, err = 0;
+	int clobbered_registers = 4;
+	u64 elr = read_sysreg(elr_el1);
+	u32 kernel_mode = read_sysreg(CurrentEL) | 1;	/* +SPSel */
+	unsigned long vbar = read_sysreg(vbar_el1);
+
+	if (arm64_kernel_unmapped_at_el0())
+		clobbered_registers++;
+
+	/* Retrieve the missing registers values */
+	for (i = 0; i < clobbered_registers; i++) {
+		/* from within the handler, this call always succeeds */
+		sdei_api_event_context(i, &regs->regs[i]);
+	}
+
+	err = sdei_event_handler(regs, arg);
+	if (err)
+		return SDEI_EV_FAILED;
+
+	if (elr != read_sysreg(elr_el1)) {
+		/*
+		 * We took a synchronous exception from the SDEI handler.
+		 * This could deadlock, and if you interrupt KVM it will
+		 * hyp-panic instead.
+		 */
+		pr_warn("unsafe: exception during handler\n");
+	}
+
+	mode = regs->pstate & (PSR_MODE32_BIT | PSR_MODE_MASK);
+
+	/*
+	 * If we interrupted the kernel with interrupts masked, we always go
+	 * back to wherever we came from.
+	 */
+	if (mode == kernel_mode && !interrupts_enabled(regs))
+		return SDEI_EV_HANDLED;
+
+	/*
+	 * Otherwise, we pretend this was an IRQ. This lets user space tasks
+	 * receive signals before we return to them, and KVM to invoke it's
+	 * world switch to do the same.
+	 *
+	 * See DDI0487B.a Table D1-7 'Vector offsets from vector table base
+	 * address'.
+	 */
+	if (mode == kernel_mode)
+		return vbar + 0x280;
+	else if (mode & PSR_MODE32_BIT)
+		return vbar + 0x680;
+
+	return vbar + 0x480;
+}
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
new file mode 100644
index 000000000..417a8a86b
--- /dev/null
+++ b/arch/arm64/kernel/setup.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/setup.c
+ *
+ * Copyright (C) 1995-2001 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/cache.h>
+#include <linux/screen_info.h>
+#include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/root_dev.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/fs.h>
+#include <linux/panic_notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/memblock.h>
+#include <linux/of_fdt.h>
+#include <linux/efi.h>
+#include <linux/psci.h>
+#include <linux/sched/task.h>
+#include <linux/scs.h>
+#include <linux/mm.h>
+
+#include <asm/acpi.h>
+#include <asm/fixmap.h>
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/daifflags.h>
+#include <asm/elf.h>
+#include <asm/cpufeature.h>
+#include <asm/cpu_ops.h>
+#include <asm/kasan.h>
+#include <asm/numa.h>
+#include <asm/scs.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/smp_plat.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+#include <asm/efi.h>
+#include <asm/xen/hypervisor.h>
+#include <asm/mmu_context.h>
+
+static int num_standard_resources;
+static struct resource *standard_resources;
+
+phys_addr_t __fdt_pointer __initdata;
+u64 mmu_enabled_at_boot __initdata;
+
+/*
+ * Standard memory resources
+ */
+static struct resource mem_res[] = {
+	{
+		.name = "Kernel code",
+		.start = 0,
+		.end = 0,
+		.flags = IORESOURCE_SYSTEM_RAM
+	},
+	{
+		.name = "Kernel data",
+		.start = 0,
+		.end = 0,
+		.flags = IORESOURCE_SYSTEM_RAM
+	}
+};
+
+#define kernel_code mem_res[0]
+#define kernel_data mem_res[1]
+
+/*
+ * The recorded values of x0 .. x3 upon kernel entry.
+ */
+u64 __cacheline_aligned boot_args[4];
+
+void __init smp_setup_processor_id(void)
+{
+	u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
+	set_cpu_logical_map(0, mpidr);
+
+	pr_info("Booting Linux on physical CPU 0x%010lx [0x%08x]\n",
+		(unsigned long)mpidr, read_cpuid_id());
+}
+
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
+{
+	return phys_id == cpu_logical_map(cpu);
+}
+
+struct mpidr_hash mpidr_hash;
+/**
+ * smp_build_mpidr_hash - Pre-compute shifts required at each affinity
+ *			  level in order to build a linear index from an
+ *			  MPIDR value. Resulting algorithm is a collision
+ *			  free hash carried out through shifting and ORing
+ */
+static void __init smp_build_mpidr_hash(void)
+{
+	u32 i, affinity, fs[4], bits[4], ls;
+	u64 mask = 0;
+	/*
+	 * Pre-scan the list of MPIDRS and filter out bits that do
+	 * not contribute to affinity levels, ie they never toggle.
+	 */
+	for_each_possible_cpu(i)
+		mask |= (cpu_logical_map(i) ^ cpu_logical_map(0));
+	pr_debug("mask of set bits %#llx\n", mask);
+	/*
+	 * Find and stash the last and first bit set at all affinity levels to
+	 * check how many bits are required to represent them.
+	 */
+	for (i = 0; i < 4; i++) {
+		affinity = MPIDR_AFFINITY_LEVEL(mask, i);
+		/*
+		 * Find the MSB bit and LSB bits position
+		 * to determine how many bits are required
+		 * to express the affinity level.
+		 */
+		ls = fls(affinity);
+		fs[i] = affinity ? ffs(affinity) - 1 : 0;
+		bits[i] = ls - fs[i];
+	}
+	/*
+	 * An index can be created from the MPIDR_EL1 by isolating the
+	 * significant bits at each affinity level and by shifting
+	 * them in order to compress the 32 bits values space to a
+	 * compressed set of values. This is equivalent to hashing
+	 * the MPIDR_EL1 through shifting and ORing. It is a collision free
+	 * hash though not minimal since some levels might contain a number
+	 * of CPUs that is not an exact power of 2 and their bit
+	 * representation might contain holes, eg MPIDR_EL1[7:0] = {0x2, 0x80}.
+	 */
+	mpidr_hash.shift_aff[0] = MPIDR_LEVEL_SHIFT(0) + fs[0];
+	mpidr_hash.shift_aff[1] = MPIDR_LEVEL_SHIFT(1) + fs[1] - bits[0];
+	mpidr_hash.shift_aff[2] = MPIDR_LEVEL_SHIFT(2) + fs[2] -
+						(bits[1] + bits[0]);
+	mpidr_hash.shift_aff[3] = MPIDR_LEVEL_SHIFT(3) +
+				  fs[3] - (bits[2] + bits[1] + bits[0]);
+	mpidr_hash.mask = mask;
+	mpidr_hash.bits = bits[3] + bits[2] + bits[1] + bits[0];
+	pr_debug("MPIDR hash: aff0[%u] aff1[%u] aff2[%u] aff3[%u] mask[%#llx] bits[%u]\n",
+		mpidr_hash.shift_aff[0],
+		mpidr_hash.shift_aff[1],
+		mpidr_hash.shift_aff[2],
+		mpidr_hash.shift_aff[3],
+		mpidr_hash.mask,
+		mpidr_hash.bits);
+	/*
+	 * 4x is an arbitrary value used to warn on a hash table much bigger
+	 * than expected on most systems.
+	 */
+	if (mpidr_hash_size() > 4 * num_possible_cpus())
+		pr_warn("Large number of MPIDR hash buckets detected\n");
+}
+
+static void *early_fdt_ptr __initdata;
+
+void __init *get_early_fdt_ptr(void)
+{
+	return early_fdt_ptr;
+}
+
+asmlinkage void __init early_fdt_map(u64 dt_phys)
+{
+	int fdt_size;
+
+	early_fixmap_init();
+	early_fdt_ptr = fixmap_remap_fdt(dt_phys, &fdt_size, PAGE_KERNEL);
+}
+
+static void __init setup_machine_fdt(phys_addr_t dt_phys)
+{
+	int size;
+	void *dt_virt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL);
+	const char *name;
+
+	if (dt_virt)
+		memblock_reserve(dt_phys, size);
+
+	if (!dt_virt || !early_init_dt_scan(dt_virt)) {
+		pr_crit("\n"
+			"Error: invalid device tree blob at physical address %pa (virtual address 0x%px)\n"
+			"The dtb must be 8-byte aligned and must not exceed 2 MB in size\n"
+			"\nPlease check your bootloader.",
+			&dt_phys, dt_virt);
+
+		/*
+		 * Note that in this _really_ early stage we cannot even BUG()
+		 * or oops, so the least terrible thing to do is cpu_relax(),
+		 * or else we could end-up printing non-initialized data, etc.
+		 */
+		while (true)
+			cpu_relax();
+	}
+
+	/* Early fixups are done, map the FDT as read-only now */
+	fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL_RO);
+
+	name = of_flat_dt_get_machine_name();
+	if (!name)
+		return;
+
+	pr_info("Machine model: %s\n", name);
+	dump_stack_set_arch_desc("%s (DT)", name);
+}
+
+static void __init request_standard_resources(void)
+{
+	struct memblock_region *region;
+	struct resource *res;
+	unsigned long i = 0;
+	size_t res_size;
+
+	kernel_code.start   = __pa_symbol(_stext);
+	kernel_code.end     = __pa_symbol(__init_begin - 1);
+	kernel_data.start   = __pa_symbol(_sdata);
+	kernel_data.end     = __pa_symbol(_end - 1);
+	insert_resource(&iomem_resource, &kernel_code);
+	insert_resource(&iomem_resource, &kernel_data);
+
+	num_standard_resources = memblock.memory.cnt;
+	res_size = num_standard_resources * sizeof(*standard_resources);
+	standard_resources = memblock_alloc(res_size, SMP_CACHE_BYTES);
+	if (!standard_resources)
+		panic("%s: Failed to allocate %zu bytes\n", __func__, res_size);
+
+	for_each_mem_region(region) {
+		res = &standard_resources[i++];
+		if (memblock_is_nomap(region)) {
+			res->name  = "reserved";
+			res->flags = IORESOURCE_MEM;
+			res->start = __pfn_to_phys(memblock_region_reserved_base_pfn(region));
+			res->end = __pfn_to_phys(memblock_region_reserved_end_pfn(region)) - 1;
+		} else {
+			res->name  = "System RAM";
+			res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
+			res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
+			res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
+		}
+
+		insert_resource(&iomem_resource, res);
+	}
+}
+
+static int __init reserve_memblock_reserved_regions(void)
+{
+	u64 i, j;
+
+	for (i = 0; i < num_standard_resources; ++i) {
+		struct resource *mem = &standard_resources[i];
+		phys_addr_t r_start, r_end, mem_size = resource_size(mem);
+
+		if (!memblock_is_region_reserved(mem->start, mem_size))
+			continue;
+
+		for_each_reserved_mem_range(j, &r_start, &r_end) {
+			resource_size_t start, end;
+
+			start = max(PFN_PHYS(PFN_DOWN(r_start)), mem->start);
+			end = min(PFN_PHYS(PFN_UP(r_end)) - 1, mem->end);
+
+			if (start > mem->end || end < mem->start)
+				continue;
+
+			reserve_region_with_split(mem, start, end, "reserved");
+		}
+	}
+
+	return 0;
+}
+arch_initcall(reserve_memblock_reserved_regions);
+
+u64 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
+
+u64 cpu_logical_map(unsigned int cpu)
+{
+	return __cpu_logical_map[cpu];
+}
+
+void __init __no_sanitize_address setup_arch(char **cmdline_p)
+{
+	setup_initial_init_mm(_stext, _etext, _edata, _end);
+
+	*cmdline_p = boot_command_line;
+
+	kaslr_init();
+
+	/*
+	 * If know now we are going to need KPTI then use non-global
+	 * mappings from the start, avoiding the cost of rewriting
+	 * everything later.
+	 */
+	arm64_use_ng_mappings = kaslr_requires_kpti();
+
+	early_fixmap_init();
+	early_ioremap_init();
+
+	setup_machine_fdt(__fdt_pointer);
+
+	/*
+	 * Initialise the static keys early as they may be enabled by the
+	 * cpufeature code and early parameters.
+	 */
+	jump_label_init();
+	parse_early_param();
+
+	dynamic_scs_init();
+
+	/*
+	 * Unmask asynchronous aborts and fiq after bringing up possible
+	 * earlycon. (Report possible System Errors once we can report this
+	 * occurred).
+	 */
+	local_daif_restore(DAIF_PROCCTX_NOIRQ);
+
+	/*
+	 * TTBR0 is only used for the identity mapping at this stage. Make it
+	 * point to zero page to avoid speculatively fetching new entries.
+	 */
+	cpu_uninstall_idmap();
+
+	xen_early_init();
+	efi_init();
+
+	if (!efi_enabled(EFI_BOOT)) {
+		if ((u64)_text % MIN_KIMG_ALIGN)
+			pr_warn(FW_BUG "Kernel image misaligned at boot, please fix your bootloader!");
+		WARN_TAINT(mmu_enabled_at_boot, TAINT_FIRMWARE_WORKAROUND,
+			   FW_BUG "Booted with MMU enabled!");
+	}
+
+	arm64_memblock_init();
+
+	paging_init();
+
+	acpi_table_upgrade();
+
+	/* Parse the ACPI tables for possible boot-time configuration */
+	acpi_boot_table_init();
+
+	if (acpi_disabled)
+		unflatten_device_tree();
+
+	bootmem_init();
+
+	kasan_init();
+
+	request_standard_resources();
+
+	early_ioremap_reset();
+
+	if (acpi_disabled)
+		psci_dt_init();
+	else
+		psci_acpi_init();
+
+	init_bootcpu_ops();
+	smp_init_cpus();
+	smp_build_mpidr_hash();
+
+	/* Init percpu seeds for random tags after cpus are set up. */
+	kasan_init_sw_tags();
+
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+	/*
+	 * Make sure init_thread_info.ttbr0 always generates translation
+	 * faults in case uaccess_enable() is inadvertently called by the init
+	 * thread.
+	 */
+	init_task.thread_info.ttbr0 = phys_to_ttbr(__pa_symbol(reserved_pg_dir));
+#endif
+
+	if (boot_args[1] || boot_args[2] || boot_args[3]) {
+		pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n"
+			"\tx1: %016llx\n\tx2: %016llx\n\tx3: %016llx\n"
+			"This indicates a broken bootloader or old kernel\n",
+			boot_args[1], boot_args[2], boot_args[3]);
+	}
+}
+
+static inline bool cpu_can_disable(unsigned int cpu)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	const struct cpu_operations *ops = get_cpu_ops(cpu);
+
+	if (ops && ops->cpu_can_disable)
+		return ops->cpu_can_disable(cpu);
+#endif
+	return false;
+}
+
+static int __init topology_init(void)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct cpu *cpu = &per_cpu(cpu_data.cpu, i);
+		cpu->hotpluggable = cpu_can_disable(i);
+		register_cpu(cpu, i);
+	}
+
+	return 0;
+}
+subsys_initcall(topology_init);
+
+static void dump_kernel_offset(void)
+{
+	const unsigned long offset = kaslr_offset();
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && offset > 0) {
+		pr_emerg("Kernel Offset: 0x%lx from 0x%lx\n",
+			 offset, KIMAGE_VADDR);
+		pr_emerg("PHYS_OFFSET: 0x%llx\n", PHYS_OFFSET);
+	} else {
+		pr_emerg("Kernel Offset: disabled\n");
+	}
+}
+
+static int arm64_panic_block_dump(struct notifier_block *self,
+				  unsigned long v, void *p)
+{
+	dump_kernel_offset();
+	dump_cpu_features();
+	dump_mem_limit();
+	return 0;
+}
+
+static struct notifier_block arm64_panic_block = {
+	.notifier_call = arm64_panic_block_dump
+};
+
+static int __init register_arm64_panic_block(void)
+{
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &arm64_panic_block);
+	return 0;
+}
+device_initcall(register_arm64_panic_block);
+
+static int __init check_mmu_enabled_at_boot(void)
+{
+	if (!efi_enabled(EFI_BOOT) && mmu_enabled_at_boot)
+		panic("Non-EFI boot detected with MMU and caches enabled");
+	return 0;
+}
+device_initcall_sync(check_mmu_enabled_at_boot);
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
new file mode 100644
index 000000000..0e8beb334
--- /dev/null
+++ b/arch/arm64/kernel/signal.c
@@ -0,0 +1,1379 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/signal.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/cache.h>
+#include <linux/compat.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/freezer.h>
+#include <linux/stddef.h>
+#include <linux/uaccess.h>
+#include <linux/sizes.h>
+#include <linux/string.h>
+#include <linux/resume_user_mode.h>
+#include <linux/ratelimit.h>
+#include <linux/syscalls.h>
+
+#include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
+#include <asm/elf.h>
+#include <asm/exception.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/unistd.h>
+#include <asm/fpsimd.h>
+#include <asm/ptrace.h>
+#include <asm/syscall.h>
+#include <asm/signal32.h>
+#include <asm/traps.h>
+#include <asm/vdso.h>
+
+/*
+ * Do a signal return; undo the signal stack. These are aligned to 128-bit.
+ */
+struct rt_sigframe {
+	struct siginfo info;
+	struct ucontext uc;
+};
+
+struct frame_record {
+	u64 fp;
+	u64 lr;
+};
+
+struct rt_sigframe_user_layout {
+	struct rt_sigframe __user *sigframe;
+	struct frame_record __user *next_frame;
+
+	unsigned long size;	/* size of allocated sigframe data */
+	unsigned long limit;	/* largest allowed size */
+
+	unsigned long fpsimd_offset;
+	unsigned long esr_offset;
+	unsigned long sve_offset;
+	unsigned long tpidr2_offset;
+	unsigned long za_offset;
+	unsigned long zt_offset;
+	unsigned long extra_offset;
+	unsigned long end_offset;
+};
+
+#define BASE_SIGFRAME_SIZE round_up(sizeof(struct rt_sigframe), 16)
+#define TERMINATOR_SIZE round_up(sizeof(struct _aarch64_ctx), 16)
+#define EXTRA_CONTEXT_SIZE round_up(sizeof(struct extra_context), 16)
+
+static void init_user_layout(struct rt_sigframe_user_layout *user)
+{
+	const size_t reserved_size =
+		sizeof(user->sigframe->uc.uc_mcontext.__reserved);
+
+	memset(user, 0, sizeof(*user));
+	user->size = offsetof(struct rt_sigframe, uc.uc_mcontext.__reserved);
+
+	user->limit = user->size + reserved_size;
+
+	user->limit -= TERMINATOR_SIZE;
+	user->limit -= EXTRA_CONTEXT_SIZE;
+	/* Reserve space for extension and terminator ^ */
+}
+
+static size_t sigframe_size(struct rt_sigframe_user_layout const *user)
+{
+	return round_up(max(user->size, sizeof(struct rt_sigframe)), 16);
+}
+
+/*
+ * Sanity limit on the approximate maximum size of signal frame we'll
+ * try to generate.  Stack alignment padding and the frame record are
+ * not taken into account.  This limit is not a guarantee and is
+ * NOT ABI.
+ */
+#define SIGFRAME_MAXSZ SZ_256K
+
+static int __sigframe_alloc(struct rt_sigframe_user_layout *user,
+			    unsigned long *offset, size_t size, bool extend)
+{
+	size_t padded_size = round_up(size, 16);
+
+	if (padded_size > user->limit - user->size &&
+	    !user->extra_offset &&
+	    extend) {
+		int ret;
+
+		user->limit += EXTRA_CONTEXT_SIZE;
+		ret = __sigframe_alloc(user, &user->extra_offset,
+				       sizeof(struct extra_context), false);
+		if (ret) {
+			user->limit -= EXTRA_CONTEXT_SIZE;
+			return ret;
+		}
+
+		/* Reserve space for the __reserved[] terminator */
+		user->size += TERMINATOR_SIZE;
+
+		/*
+		 * Allow expansion up to SIGFRAME_MAXSZ, ensuring space for
+		 * the terminator:
+		 */
+		user->limit = SIGFRAME_MAXSZ - TERMINATOR_SIZE;
+	}
+
+	/* Still not enough space?  Bad luck! */
+	if (padded_size > user->limit - user->size)
+		return -ENOMEM;
+
+	*offset = user->size;
+	user->size += padded_size;
+
+	return 0;
+}
+
+/*
+ * Allocate space for an optional record of <size> bytes in the user
+ * signal frame.  The offset from the signal frame base address to the
+ * allocated block is assigned to *offset.
+ */
+static int sigframe_alloc(struct rt_sigframe_user_layout *user,
+			  unsigned long *offset, size_t size)
+{
+	return __sigframe_alloc(user, offset, size, true);
+}
+
+/* Allocate the null terminator record and prevent further allocations */
+static int sigframe_alloc_end(struct rt_sigframe_user_layout *user)
+{
+	int ret;
+
+	/* Un-reserve the space reserved for the terminator: */
+	user->limit += TERMINATOR_SIZE;
+
+	ret = sigframe_alloc(user, &user->end_offset,
+			     sizeof(struct _aarch64_ctx));
+	if (ret)
+		return ret;
+
+	/* Prevent further allocation: */
+	user->limit = user->size;
+	return 0;
+}
+
+static void __user *apply_user_offset(
+	struct rt_sigframe_user_layout const *user, unsigned long offset)
+{
+	char __user *base = (char __user *)user->sigframe;
+
+	return base + offset;
+}
+
+struct user_ctxs {
+	struct fpsimd_context __user *fpsimd;
+	u32 fpsimd_size;
+	struct sve_context __user *sve;
+	u32 sve_size;
+	struct tpidr2_context __user *tpidr2;
+	u32 tpidr2_size;
+	struct za_context __user *za;
+	u32 za_size;
+	struct zt_context __user *zt;
+	u32 zt_size;
+};
+
+static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
+{
+	struct user_fpsimd_state const *fpsimd =
+		&current->thread.uw.fpsimd_state;
+	int err;
+
+	/* copy the FP and status/control registers */
+	err = __copy_to_user(ctx->vregs, fpsimd->vregs, sizeof(fpsimd->vregs));
+	__put_user_error(fpsimd->fpsr, &ctx->fpsr, err);
+	__put_user_error(fpsimd->fpcr, &ctx->fpcr, err);
+
+	/* copy the magic/size information */
+	__put_user_error(FPSIMD_MAGIC, &ctx->head.magic, err);
+	__put_user_error(sizeof(struct fpsimd_context), &ctx->head.size, err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_fpsimd_context(struct user_ctxs *user)
+{
+	struct user_fpsimd_state fpsimd;
+	int err = 0;
+
+	/* check the size information */
+	if (user->fpsimd_size != sizeof(struct fpsimd_context))
+		return -EINVAL;
+
+	/* copy the FP and status/control registers */
+	err = __copy_from_user(fpsimd.vregs, &(user->fpsimd->vregs),
+			       sizeof(fpsimd.vregs));
+	__get_user_error(fpsimd.fpsr, &(user->fpsimd->fpsr), err);
+	__get_user_error(fpsimd.fpcr, &(user->fpsimd->fpcr), err);
+
+	clear_thread_flag(TIF_SVE);
+	current->thread.fp_type = FP_STATE_FPSIMD;
+
+	/* load the hardware registers from the fpsimd_state structure */
+	if (!err)
+		fpsimd_update_current_state(&fpsimd);
+
+	return err ? -EFAULT : 0;
+}
+
+
+#ifdef CONFIG_ARM64_SVE
+
+static int preserve_sve_context(struct sve_context __user *ctx)
+{
+	int err = 0;
+	u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+	u16 flags = 0;
+	unsigned int vl = task_get_sve_vl(current);
+	unsigned int vq = 0;
+
+	if (thread_sm_enabled(&current->thread)) {
+		vl = task_get_sme_vl(current);
+		vq = sve_vq_from_vl(vl);
+		flags |= SVE_SIG_FLAG_SM;
+	} else if (test_thread_flag(TIF_SVE)) {
+		vq = sve_vq_from_vl(vl);
+	}
+
+	memset(reserved, 0, sizeof(reserved));
+
+	__put_user_error(SVE_MAGIC, &ctx->head.magic, err);
+	__put_user_error(round_up(SVE_SIG_CONTEXT_SIZE(vq), 16),
+			 &ctx->head.size, err);
+	__put_user_error(vl, &ctx->vl, err);
+	__put_user_error(flags, &ctx->flags, err);
+	BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
+	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
+
+	if (vq) {
+		/*
+		 * This assumes that the SVE state has already been saved to
+		 * the task struct by calling the function
+		 * fpsimd_signal_preserve_current_state().
+		 */
+		err |= __copy_to_user((char __user *)ctx + SVE_SIG_REGS_OFFSET,
+				      current->thread.sve_state,
+				      SVE_SIG_REGS_SIZE(vq));
+	}
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_sve_fpsimd_context(struct user_ctxs *user)
+{
+	int err = 0;
+	unsigned int vl, vq;
+	struct user_fpsimd_state fpsimd;
+	u16 user_vl, flags;
+
+	if (user->sve_size < sizeof(*user->sve))
+		return -EINVAL;
+
+	__get_user_error(user_vl, &(user->sve->vl), err);
+	__get_user_error(flags, &(user->sve->flags), err);
+	if (err)
+		return err;
+
+	if (flags & SVE_SIG_FLAG_SM) {
+		if (!system_supports_sme())
+			return -EINVAL;
+
+		vl = task_get_sme_vl(current);
+	} else {
+		/*
+		 * A SME only system use SVE for streaming mode so can
+		 * have a SVE formatted context with a zero VL and no
+		 * payload data.
+		 */
+		if (!system_supports_sve() && !system_supports_sme())
+			return -EINVAL;
+
+		vl = task_get_sve_vl(current);
+	}
+
+	if (user_vl != vl)
+		return -EINVAL;
+
+	if (user->sve_size == sizeof(*user->sve)) {
+		clear_thread_flag(TIF_SVE);
+		current->thread.svcr &= ~SVCR_SM_MASK;
+		current->thread.fp_type = FP_STATE_FPSIMD;
+		goto fpsimd_only;
+	}
+
+	vq = sve_vq_from_vl(vl);
+
+	if (user->sve_size < SVE_SIG_CONTEXT_SIZE(vq))
+		return -EINVAL;
+
+	/*
+	 * Careful: we are about __copy_from_user() directly into
+	 * thread.sve_state with preemption enabled, so protection is
+	 * needed to prevent a racing context switch from writing stale
+	 * registers back over the new data.
+	 */
+
+	fpsimd_flush_task_state(current);
+	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
+
+	sve_alloc(current, true);
+	if (!current->thread.sve_state) {
+		clear_thread_flag(TIF_SVE);
+		return -ENOMEM;
+	}
+
+	err = __copy_from_user(current->thread.sve_state,
+			       (char __user const *)user->sve +
+					SVE_SIG_REGS_OFFSET,
+			       SVE_SIG_REGS_SIZE(vq));
+	if (err)
+		return -EFAULT;
+
+	if (flags & SVE_SIG_FLAG_SM)
+		current->thread.svcr |= SVCR_SM_MASK;
+	else
+		set_thread_flag(TIF_SVE);
+	current->thread.fp_type = FP_STATE_SVE;
+
+fpsimd_only:
+	/* copy the FP and status/control registers */
+	/* restore_sigframe() already checked that user->fpsimd != NULL. */
+	err = __copy_from_user(fpsimd.vregs, user->fpsimd->vregs,
+			       sizeof(fpsimd.vregs));
+	__get_user_error(fpsimd.fpsr, &user->fpsimd->fpsr, err);
+	__get_user_error(fpsimd.fpcr, &user->fpsimd->fpcr, err);
+
+	/* load the hardware registers from the fpsimd_state structure */
+	if (!err)
+		fpsimd_update_current_state(&fpsimd);
+
+	return err ? -EFAULT : 0;
+}
+
+#else /* ! CONFIG_ARM64_SVE */
+
+static int restore_sve_fpsimd_context(struct user_ctxs *user)
+{
+	WARN_ON_ONCE(1);
+	return -EINVAL;
+}
+
+/* Turn any non-optimised out attempts to use this into a link error: */
+extern int preserve_sve_context(void __user *ctx);
+
+#endif /* ! CONFIG_ARM64_SVE */
+
+#ifdef CONFIG_ARM64_SME
+
+static int preserve_tpidr2_context(struct tpidr2_context __user *ctx)
+{
+	int err = 0;
+
+	current->thread.tpidr2_el0 = read_sysreg_s(SYS_TPIDR2_EL0);
+
+	__put_user_error(TPIDR2_MAGIC, &ctx->head.magic, err);
+	__put_user_error(sizeof(*ctx), &ctx->head.size, err);
+	__put_user_error(current->thread.tpidr2_el0, &ctx->tpidr2, err);
+
+	return err;
+}
+
+static int restore_tpidr2_context(struct user_ctxs *user)
+{
+	u64 tpidr2_el0;
+	int err = 0;
+
+	if (user->tpidr2_size != sizeof(*user->tpidr2))
+		return -EINVAL;
+
+	__get_user_error(tpidr2_el0, &user->tpidr2->tpidr2, err);
+	if (!err)
+		write_sysreg_s(tpidr2_el0, SYS_TPIDR2_EL0);
+
+	return err;
+}
+
+static int preserve_za_context(struct za_context __user *ctx)
+{
+	int err = 0;
+	u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+	unsigned int vl = task_get_sme_vl(current);
+	unsigned int vq;
+
+	if (thread_za_enabled(&current->thread))
+		vq = sve_vq_from_vl(vl);
+	else
+		vq = 0;
+
+	memset(reserved, 0, sizeof(reserved));
+
+	__put_user_error(ZA_MAGIC, &ctx->head.magic, err);
+	__put_user_error(round_up(ZA_SIG_CONTEXT_SIZE(vq), 16),
+			 &ctx->head.size, err);
+	__put_user_error(vl, &ctx->vl, err);
+	BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
+	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
+
+	if (vq) {
+		/*
+		 * This assumes that the ZA state has already been saved to
+		 * the task struct by calling the function
+		 * fpsimd_signal_preserve_current_state().
+		 */
+		err |= __copy_to_user((char __user *)ctx + ZA_SIG_REGS_OFFSET,
+				      current->thread.sme_state,
+				      ZA_SIG_REGS_SIZE(vq));
+	}
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_za_context(struct user_ctxs *user)
+{
+	int err = 0;
+	unsigned int vq;
+	u16 user_vl;
+
+	if (user->za_size < sizeof(*user->za))
+		return -EINVAL;
+
+	__get_user_error(user_vl, &(user->za->vl), err);
+	if (err)
+		return err;
+
+	if (user_vl != task_get_sme_vl(current))
+		return -EINVAL;
+
+	if (user->za_size == sizeof(*user->za)) {
+		current->thread.svcr &= ~SVCR_ZA_MASK;
+		return 0;
+	}
+
+	vq = sve_vq_from_vl(user_vl);
+
+	if (user->za_size < ZA_SIG_CONTEXT_SIZE(vq))
+		return -EINVAL;
+
+	/*
+	 * Careful: we are about __copy_from_user() directly into
+	 * thread.sme_state with preemption enabled, so protection is
+	 * needed to prevent a racing context switch from writing stale
+	 * registers back over the new data.
+	 */
+
+	fpsimd_flush_task_state(current);
+	/* From now, fpsimd_thread_switch() won't touch thread.sve_state */
+
+	sme_alloc(current, true);
+	if (!current->thread.sme_state) {
+		current->thread.svcr &= ~SVCR_ZA_MASK;
+		clear_thread_flag(TIF_SME);
+		return -ENOMEM;
+	}
+
+	err = __copy_from_user(current->thread.sme_state,
+			       (char __user const *)user->za +
+					ZA_SIG_REGS_OFFSET,
+			       ZA_SIG_REGS_SIZE(vq));
+	if (err)
+		return -EFAULT;
+
+	set_thread_flag(TIF_SME);
+	current->thread.svcr |= SVCR_ZA_MASK;
+
+	return 0;
+}
+
+static int preserve_zt_context(struct zt_context __user *ctx)
+{
+	int err = 0;
+	u16 reserved[ARRAY_SIZE(ctx->__reserved)];
+
+	if (WARN_ON(!thread_za_enabled(&current->thread)))
+		return -EINVAL;
+
+	memset(reserved, 0, sizeof(reserved));
+
+	__put_user_error(ZT_MAGIC, &ctx->head.magic, err);
+	__put_user_error(round_up(ZT_SIG_CONTEXT_SIZE(1), 16),
+			 &ctx->head.size, err);
+	__put_user_error(1, &ctx->nregs, err);
+	BUILD_BUG_ON(sizeof(ctx->__reserved) != sizeof(reserved));
+	err |= __copy_to_user(&ctx->__reserved, reserved, sizeof(reserved));
+
+	/*
+	 * This assumes that the ZT state has already been saved to
+	 * the task struct by calling the function
+	 * fpsimd_signal_preserve_current_state().
+	 */
+	err |= __copy_to_user((char __user *)ctx + ZT_SIG_REGS_OFFSET,
+			      thread_zt_state(&current->thread),
+			      ZT_SIG_REGS_SIZE(1));
+
+	return err ? -EFAULT : 0;
+}
+
+static int restore_zt_context(struct user_ctxs *user)
+{
+	int err;
+	u16 nregs;
+
+	/* ZA must be restored first for this check to be valid */
+	if (!thread_za_enabled(&current->thread))
+		return -EINVAL;
+
+	if (user->zt_size != ZT_SIG_CONTEXT_SIZE(1))
+		return -EINVAL;
+
+	if (__copy_from_user(&nregs, &(user->zt->nregs), sizeof(nregs)))
+		return -EFAULT;
+
+	if (nregs != 1)
+		return -EINVAL;
+
+	/*
+	 * Careful: we are about __copy_from_user() directly into
+	 * thread.zt_state with preemption enabled, so protection is
+	 * needed to prevent a racing context switch from writing stale
+	 * registers back over the new data.
+	 */
+
+	fpsimd_flush_task_state(current);
+	/* From now, fpsimd_thread_switch() won't touch ZT in thread state */
+
+	err = __copy_from_user(thread_zt_state(&current->thread),
+			       (char __user const *)user->zt +
+					ZT_SIG_REGS_OFFSET,
+			       ZT_SIG_REGS_SIZE(1));
+	if (err)
+		return -EFAULT;
+
+	return 0;
+}
+
+#else /* ! CONFIG_ARM64_SME */
+
+/* Turn any non-optimised out attempts to use these into a link error: */
+extern int preserve_tpidr2_context(void __user *ctx);
+extern int restore_tpidr2_context(struct user_ctxs *user);
+extern int preserve_za_context(void __user *ctx);
+extern int restore_za_context(struct user_ctxs *user);
+extern int preserve_zt_context(void __user *ctx);
+extern int restore_zt_context(struct user_ctxs *user);
+
+#endif /* ! CONFIG_ARM64_SME */
+
+static int parse_user_sigframe(struct user_ctxs *user,
+			       struct rt_sigframe __user *sf)
+{
+	struct sigcontext __user *const sc = &sf->uc.uc_mcontext;
+	struct _aarch64_ctx __user *head;
+	char __user *base = (char __user *)&sc->__reserved;
+	size_t offset = 0;
+	size_t limit = sizeof(sc->__reserved);
+	bool have_extra_context = false;
+	char const __user *const sfp = (char const __user *)sf;
+
+	user->fpsimd = NULL;
+	user->sve = NULL;
+	user->tpidr2 = NULL;
+	user->za = NULL;
+	user->zt = NULL;
+
+	if (!IS_ALIGNED((unsigned long)base, 16))
+		goto invalid;
+
+	while (1) {
+		int err = 0;
+		u32 magic, size;
+		char const __user *userp;
+		struct extra_context const __user *extra;
+		u64 extra_datap;
+		u32 extra_size;
+		struct _aarch64_ctx const __user *end;
+		u32 end_magic, end_size;
+
+		if (limit - offset < sizeof(*head))
+			goto invalid;
+
+		if (!IS_ALIGNED(offset, 16))
+			goto invalid;
+
+		head = (struct _aarch64_ctx __user *)(base + offset);
+		__get_user_error(magic, &head->magic, err);
+		__get_user_error(size, &head->size, err);
+		if (err)
+			return err;
+
+		if (limit - offset < size)
+			goto invalid;
+
+		switch (magic) {
+		case 0:
+			if (size)
+				goto invalid;
+
+			goto done;
+
+		case FPSIMD_MAGIC:
+			if (!system_supports_fpsimd())
+				goto invalid;
+			if (user->fpsimd)
+				goto invalid;
+
+			user->fpsimd = (struct fpsimd_context __user *)head;
+			user->fpsimd_size = size;
+			break;
+
+		case ESR_MAGIC:
+			/* ignore */
+			break;
+
+		case SVE_MAGIC:
+			if (!system_supports_sve() && !system_supports_sme())
+				goto invalid;
+
+			if (user->sve)
+				goto invalid;
+
+			user->sve = (struct sve_context __user *)head;
+			user->sve_size = size;
+			break;
+
+		case TPIDR2_MAGIC:
+			if (!system_supports_tpidr2())
+				goto invalid;
+
+			if (user->tpidr2)
+				goto invalid;
+
+			user->tpidr2 = (struct tpidr2_context __user *)head;
+			user->tpidr2_size = size;
+			break;
+
+		case ZA_MAGIC:
+			if (!system_supports_sme())
+				goto invalid;
+
+			if (user->za)
+				goto invalid;
+
+			user->za = (struct za_context __user *)head;
+			user->za_size = size;
+			break;
+
+		case ZT_MAGIC:
+			if (!system_supports_sme2())
+				goto invalid;
+
+			if (user->zt)
+				goto invalid;
+
+			user->zt = (struct zt_context __user *)head;
+			user->zt_size = size;
+			break;
+
+		case EXTRA_MAGIC:
+			if (have_extra_context)
+				goto invalid;
+
+			if (size < sizeof(*extra))
+				goto invalid;
+
+			userp = (char const __user *)head;
+
+			extra = (struct extra_context const __user *)userp;
+			userp += size;
+
+			__get_user_error(extra_datap, &extra->datap, err);
+			__get_user_error(extra_size, &extra->size, err);
+			if (err)
+				return err;
+
+			/* Check for the dummy terminator in __reserved[]: */
+
+			if (limit - offset - size < TERMINATOR_SIZE)
+				goto invalid;
+
+			end = (struct _aarch64_ctx const __user *)userp;
+			userp += TERMINATOR_SIZE;
+
+			__get_user_error(end_magic, &end->magic, err);
+			__get_user_error(end_size, &end->size, err);
+			if (err)
+				return err;
+
+			if (end_magic || end_size)
+				goto invalid;
+
+			/* Prevent looping/repeated parsing of extra_context */
+			have_extra_context = true;
+
+			base = (__force void __user *)extra_datap;
+			if (!IS_ALIGNED((unsigned long)base, 16))
+				goto invalid;
+
+			if (!IS_ALIGNED(extra_size, 16))
+				goto invalid;
+
+			if (base != userp)
+				goto invalid;
+
+			/* Reject "unreasonably large" frames: */
+			if (extra_size > sfp + SIGFRAME_MAXSZ - userp)
+				goto invalid;
+
+			/*
+			 * Ignore trailing terminator in __reserved[]
+			 * and start parsing extra data:
+			 */
+			offset = 0;
+			limit = extra_size;
+
+			if (!access_ok(base, limit))
+				goto invalid;
+
+			continue;
+
+		default:
+			goto invalid;
+		}
+
+		if (size < sizeof(*head))
+			goto invalid;
+
+		if (limit - offset < size)
+			goto invalid;
+
+		offset += size;
+	}
+
+done:
+	return 0;
+
+invalid:
+	return -EINVAL;
+}
+
+static int restore_sigframe(struct pt_regs *regs,
+			    struct rt_sigframe __user *sf)
+{
+	sigset_t set;
+	int i, err;
+	struct user_ctxs user;
+
+	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
+	if (err == 0)
+		set_current_blocked(&set);
+
+	for (i = 0; i < 31; i++)
+		__get_user_error(regs->regs[i], &sf->uc.uc_mcontext.regs[i],
+				 err);
+	__get_user_error(regs->sp, &sf->uc.uc_mcontext.sp, err);
+	__get_user_error(regs->pc, &sf->uc.uc_mcontext.pc, err);
+	__get_user_error(regs->pstate, &sf->uc.uc_mcontext.pstate, err);
+
+	/*
+	 * Avoid sys_rt_sigreturn() restarting.
+	 */
+	forget_syscall(regs);
+
+	err |= !valid_user_regs(&regs->user_regs, current);
+	if (err == 0)
+		err = parse_user_sigframe(&user, sf);
+
+	if (err == 0 && system_supports_fpsimd()) {
+		if (!user.fpsimd)
+			return -EINVAL;
+
+		if (user.sve)
+			err = restore_sve_fpsimd_context(&user);
+		else
+			err = restore_fpsimd_context(&user);
+	}
+
+	if (err == 0 && system_supports_tpidr2() && user.tpidr2)
+		err = restore_tpidr2_context(&user);
+
+	if (err == 0 && system_supports_sme() && user.za)
+		err = restore_za_context(&user);
+
+	if (err == 0 && system_supports_sme2() && user.zt)
+		err = restore_zt_context(&user);
+
+	return err;
+}
+
+SYSCALL_DEFINE0(rt_sigreturn)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct rt_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 128-bit boundary, then 'sp' should
+	 * be word aligned here.
+	 */
+	if (regs->sp & 15)
+		goto badframe;
+
+	frame = (struct rt_sigframe __user *)regs->sp;
+
+	if (!access_ok(frame, sizeof (*frame)))
+		goto badframe;
+
+	if (restore_sigframe(regs, frame))
+		goto badframe;
+
+	if (restore_altstack(&frame->uc.uc_stack))
+		goto badframe;
+
+	return regs->regs[0];
+
+badframe:
+	arm64_notify_segfault(regs->sp);
+	return 0;
+}
+
+/*
+ * Determine the layout of optional records in the signal frame
+ *
+ * add_all: if true, lays out the biggest possible signal frame for
+ *	this task; otherwise, generates a layout for the current state
+ *	of the task.
+ */
+static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
+				 bool add_all)
+{
+	int err;
+
+	if (system_supports_fpsimd()) {
+		err = sigframe_alloc(user, &user->fpsimd_offset,
+				     sizeof(struct fpsimd_context));
+		if (err)
+			return err;
+	}
+
+	/* fault information, if valid */
+	if (add_all || current->thread.fault_code) {
+		err = sigframe_alloc(user, &user->esr_offset,
+				     sizeof(struct esr_context));
+		if (err)
+			return err;
+	}
+
+	if (system_supports_sve() || system_supports_sme()) {
+		unsigned int vq = 0;
+
+		if (add_all || test_thread_flag(TIF_SVE) ||
+		    thread_sm_enabled(&current->thread)) {
+			int vl = max(sve_max_vl(), sme_max_vl());
+
+			if (!add_all)
+				vl = thread_get_cur_vl(&current->thread);
+
+			vq = sve_vq_from_vl(vl);
+		}
+
+		err = sigframe_alloc(user, &user->sve_offset,
+				     SVE_SIG_CONTEXT_SIZE(vq));
+		if (err)
+			return err;
+	}
+
+	if (system_supports_tpidr2()) {
+		err = sigframe_alloc(user, &user->tpidr2_offset,
+				     sizeof(struct tpidr2_context));
+		if (err)
+			return err;
+	}
+
+	if (system_supports_sme()) {
+		unsigned int vl;
+		unsigned int vq = 0;
+
+		if (add_all)
+			vl = sme_max_vl();
+		else
+			vl = task_get_sme_vl(current);
+
+		if (thread_za_enabled(&current->thread))
+			vq = sve_vq_from_vl(vl);
+
+		err = sigframe_alloc(user, &user->za_offset,
+				     ZA_SIG_CONTEXT_SIZE(vq));
+		if (err)
+			return err;
+	}
+
+	if (system_supports_sme2()) {
+		if (add_all || thread_za_enabled(&current->thread)) {
+			err = sigframe_alloc(user, &user->zt_offset,
+					     ZT_SIG_CONTEXT_SIZE(1));
+			if (err)
+				return err;
+		}
+	}
+
+	return sigframe_alloc_end(user);
+}
+
+static int setup_sigframe(struct rt_sigframe_user_layout *user,
+			  struct pt_regs *regs, sigset_t *set)
+{
+	int i, err = 0;
+	struct rt_sigframe __user *sf = user->sigframe;
+
+	/* set up the stack frame for unwinding */
+	__put_user_error(regs->regs[29], &user->next_frame->fp, err);
+	__put_user_error(regs->regs[30], &user->next_frame->lr, err);
+
+	for (i = 0; i < 31; i++)
+		__put_user_error(regs->regs[i], &sf->uc.uc_mcontext.regs[i],
+				 err);
+	__put_user_error(regs->sp, &sf->uc.uc_mcontext.sp, err);
+	__put_user_error(regs->pc, &sf->uc.uc_mcontext.pc, err);
+	__put_user_error(regs->pstate, &sf->uc.uc_mcontext.pstate, err);
+
+	__put_user_error(current->thread.fault_address, &sf->uc.uc_mcontext.fault_address, err);
+
+	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
+
+	if (err == 0 && system_supports_fpsimd()) {
+		struct fpsimd_context __user *fpsimd_ctx =
+			apply_user_offset(user, user->fpsimd_offset);
+		err |= preserve_fpsimd_context(fpsimd_ctx);
+	}
+
+	/* fault information, if valid */
+	if (err == 0 && user->esr_offset) {
+		struct esr_context __user *esr_ctx =
+			apply_user_offset(user, user->esr_offset);
+
+		__put_user_error(ESR_MAGIC, &esr_ctx->head.magic, err);
+		__put_user_error(sizeof(*esr_ctx), &esr_ctx->head.size, err);
+		__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
+	}
+
+	/* Scalable Vector Extension state (including streaming), if present */
+	if ((system_supports_sve() || system_supports_sme()) &&
+	    err == 0 && user->sve_offset) {
+		struct sve_context __user *sve_ctx =
+			apply_user_offset(user, user->sve_offset);
+		err |= preserve_sve_context(sve_ctx);
+	}
+
+	/* TPIDR2 if supported */
+	if (system_supports_tpidr2() && err == 0) {
+		struct tpidr2_context __user *tpidr2_ctx =
+			apply_user_offset(user, user->tpidr2_offset);
+		err |= preserve_tpidr2_context(tpidr2_ctx);
+	}
+
+	/* ZA state if present */
+	if (system_supports_sme() && err == 0 && user->za_offset) {
+		struct za_context __user *za_ctx =
+			apply_user_offset(user, user->za_offset);
+		err |= preserve_za_context(za_ctx);
+	}
+
+	/* ZT state if present */
+	if (system_supports_sme2() && err == 0 && user->zt_offset) {
+		struct zt_context __user *zt_ctx =
+			apply_user_offset(user, user->zt_offset);
+		err |= preserve_zt_context(zt_ctx);
+	}
+
+	if (err == 0 && user->extra_offset) {
+		char __user *sfp = (char __user *)user->sigframe;
+		char __user *userp =
+			apply_user_offset(user, user->extra_offset);
+
+		struct extra_context __user *extra;
+		struct _aarch64_ctx __user *end;
+		u64 extra_datap;
+		u32 extra_size;
+
+		extra = (struct extra_context __user *)userp;
+		userp += EXTRA_CONTEXT_SIZE;
+
+		end = (struct _aarch64_ctx __user *)userp;
+		userp += TERMINATOR_SIZE;
+
+		/*
+		 * extra_datap is just written to the signal frame.
+		 * The value gets cast back to a void __user *
+		 * during sigreturn.
+		 */
+		extra_datap = (__force u64)userp;
+		extra_size = sfp + round_up(user->size, 16) - userp;
+
+		__put_user_error(EXTRA_MAGIC, &extra->head.magic, err);
+		__put_user_error(EXTRA_CONTEXT_SIZE, &extra->head.size, err);
+		__put_user_error(extra_datap, &extra->datap, err);
+		__put_user_error(extra_size, &extra->size, err);
+
+		/* Add the terminator */
+		__put_user_error(0, &end->magic, err);
+		__put_user_error(0, &end->size, err);
+	}
+
+	/* set the "end" magic */
+	if (err == 0) {
+		struct _aarch64_ctx __user *end =
+			apply_user_offset(user, user->end_offset);
+
+		__put_user_error(0, &end->magic, err);
+		__put_user_error(0, &end->size, err);
+	}
+
+	return err;
+}
+
+static int get_sigframe(struct rt_sigframe_user_layout *user,
+			 struct ksignal *ksig, struct pt_regs *regs)
+{
+	unsigned long sp, sp_top;
+	int err;
+
+	init_user_layout(user);
+	err = setup_sigframe_layout(user, false);
+	if (err)
+		return err;
+
+	sp = sp_top = sigsp(regs->sp, ksig);
+
+	sp = round_down(sp - sizeof(struct frame_record), 16);
+	user->next_frame = (struct frame_record __user *)sp;
+
+	sp = round_down(sp, 16) - sigframe_size(user);
+	user->sigframe = (struct rt_sigframe __user *)sp;
+
+	/*
+	 * Check that we can actually write to the signal frame.
+	 */
+	if (!access_ok(user->sigframe, sp_top - sp))
+		return -EFAULT;
+
+	return 0;
+}
+
+static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+			 struct rt_sigframe_user_layout *user, int usig)
+{
+	__sigrestore_t sigtramp;
+
+	regs->regs[0] = usig;
+	regs->sp = (unsigned long)user->sigframe;
+	regs->regs[29] = (unsigned long)&user->next_frame->fp;
+	regs->pc = (unsigned long)ka->sa.sa_handler;
+
+	/*
+	 * Signal delivery is a (wacky) indirect function call in
+	 * userspace, so simulate the same setting of BTYPE as a BLR
+	 * <register containing the signal handler entry point>.
+	 * Signal delivery to a location in a PROT_BTI guarded page
+	 * that is not a function entry point will now trigger a
+	 * SIGILL in userspace.
+	 *
+	 * If the signal handler entry point is not in a PROT_BTI
+	 * guarded page, this is harmless.
+	 */
+	if (system_supports_bti()) {
+		regs->pstate &= ~PSR_BTYPE_MASK;
+		regs->pstate |= PSR_BTYPE_C;
+	}
+
+	/* TCO (Tag Check Override) always cleared for signal handlers */
+	regs->pstate &= ~PSR_TCO_BIT;
+
+	/* Signal handlers are invoked with ZA and streaming mode disabled */
+	if (system_supports_sme()) {
+		/*
+		 * If we were in streaming mode the saved register
+		 * state was SVE but we will exit SM and use the
+		 * FPSIMD register state - flush the saved FPSIMD
+		 * register state in case it gets loaded.
+		 */
+		if (current->thread.svcr & SVCR_SM_MASK) {
+			memset(&current->thread.uw.fpsimd_state, 0,
+			       sizeof(current->thread.uw.fpsimd_state));
+			current->thread.fp_type = FP_STATE_FPSIMD;
+		}
+
+		current->thread.svcr &= ~(SVCR_ZA_MASK |
+					  SVCR_SM_MASK);
+		sme_smstop();
+	}
+
+	if (ka->sa.sa_flags & SA_RESTORER)
+		sigtramp = ka->sa.sa_restorer;
+	else
+		sigtramp = VDSO_SYMBOL(current->mm->context.vdso, sigtramp);
+
+	regs->regs[30] = (unsigned long)sigtramp;
+}
+
+static int setup_rt_frame(int usig, struct ksignal *ksig, sigset_t *set,
+			  struct pt_regs *regs)
+{
+	struct rt_sigframe_user_layout user;
+	struct rt_sigframe __user *frame;
+	int err = 0;
+
+	fpsimd_signal_preserve_current_state();
+
+	if (get_sigframe(&user, ksig, regs))
+		return 1;
+
+	frame = user.sigframe;
+
+	__put_user_error(0, &frame->uc.uc_flags, err);
+	__put_user_error(NULL, &frame->uc.uc_link, err);
+
+	err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+	err |= setup_sigframe(&user, regs, set);
+	if (err == 0) {
+		setup_return(regs, &ksig->ka, &user, usig);
+		if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
+			err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+			regs->regs[1] = (unsigned long)&frame->info;
+			regs->regs[2] = (unsigned long)&frame->uc;
+		}
+	}
+
+	return err;
+}
+
+static void setup_restart_syscall(struct pt_regs *regs)
+{
+	if (is_compat_task())
+		compat_setup_restart_syscall(regs);
+	else
+		regs->regs[8] = __NR_restart_syscall;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int usig = ksig->sig;
+	int ret;
+
+	rseq_signal_deliver(ksig, regs);
+
+	/*
+	 * Set up the stack frame
+	 */
+	if (is_compat_task()) {
+		if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+			ret = compat_setup_rt_frame(usig, ksig, oldset, regs);
+		else
+			ret = compat_setup_frame(usig, ksig, oldset, regs);
+	} else {
+		ret = setup_rt_frame(usig, ksig, oldset, regs);
+	}
+
+	/*
+	 * Check that the resulting registers are actually sane.
+	 */
+	ret |= !valid_user_regs(&regs->user_regs, current);
+
+	/* Step into the signal handler if we are stepping */
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static void do_signal(struct pt_regs *regs)
+{
+	unsigned long continue_addr = 0, restart_addr = 0;
+	int retval = 0;
+	struct ksignal ksig;
+	bool syscall = in_syscall(regs);
+
+	/*
+	 * If we were from a system call, check for system call restarting...
+	 */
+	if (syscall) {
+		continue_addr = regs->pc;
+		restart_addr = continue_addr - (compat_thumb_mode(regs) ? 2 : 4);
+		retval = regs->regs[0];
+
+		/*
+		 * Avoid additional syscall restarting via ret_to_user.
+		 */
+		forget_syscall(regs);
+
+		/*
+		 * Prepare for system call restart. We do this here so that a
+		 * debugger will see the already changed PC.
+		 */
+		switch (retval) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[0] = regs->orig_x0;
+			regs->pc = restart_addr;
+			break;
+		}
+	}
+
+	/*
+	 * Get the signal to deliver. When running under ptrace, at this point
+	 * the debugger may change all of our registers.
+	 */
+	if (get_signal(&ksig)) {
+		/*
+		 * Depending on the signal settings, we may need to revert the
+		 * decision to restart the system call, but skip this if a
+		 * debugger has chosen to restart at a different PC.
+		 */
+		if (regs->pc == restart_addr &&
+		    (retval == -ERESTARTNOHAND ||
+		     retval == -ERESTART_RESTARTBLOCK ||
+		     (retval == -ERESTARTSYS &&
+		      !(ksig.ka.sa.sa_flags & SA_RESTART)))) {
+			syscall_set_return_value(current, regs, -EINTR, 0);
+			regs->pc = continue_addr;
+		}
+
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	/*
+	 * Handle restarting a different system call. As above, if a debugger
+	 * has chosen to restart at a different PC, ignore the restart.
+	 */
+	if (syscall && regs->pc == restart_addr) {
+		if (retval == -ERESTART_RESTARTBLOCK)
+			setup_restart_syscall(regs);
+		user_rewind_single_step(current);
+	}
+
+	restore_saved_sigmask();
+}
+
+void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags)
+{
+	do {
+		if (thread_flags & _TIF_NEED_RESCHED) {
+			/* Unmask Debug and SError for the next task */
+			local_daif_restore(DAIF_PROCCTX_NOIRQ);
+
+			schedule();
+		} else {
+			local_daif_restore(DAIF_PROCCTX);
+
+			if (thread_flags & _TIF_UPROBE)
+				uprobe_notify_resume(regs);
+
+			if (thread_flags & _TIF_MTE_ASYNC_FAULT) {
+				clear_thread_flag(TIF_MTE_ASYNC_FAULT);
+				send_sig_fault(SIGSEGV, SEGV_MTEAERR,
+					       (void __user *)NULL, current);
+			}
+
+			if (thread_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
+				do_signal(regs);
+
+			if (thread_flags & _TIF_NOTIFY_RESUME)
+				resume_user_mode_work(regs);
+
+			if (thread_flags & _TIF_FOREIGN_FPSTATE)
+				fpsimd_restore_current_state();
+		}
+
+		local_daif_mask();
+		thread_flags = read_thread_flags();
+	} while (thread_flags & _TIF_WORK_MASK);
+}
+
+unsigned long __ro_after_init signal_minsigstksz;
+
+/*
+ * Determine the stack space required for guaranteed signal devliery.
+ * This function is used to populate AT_MINSIGSTKSZ at process startup.
+ * cpufeatures setup is assumed to be complete.
+ */
+void __init minsigstksz_setup(void)
+{
+	struct rt_sigframe_user_layout user;
+
+	init_user_layout(&user);
+
+	/*
+	 * If this fails, SIGFRAME_MAXSZ needs to be enlarged.  It won't
+	 * be big enough, but it's our best guess:
+	 */
+	if (WARN_ON(setup_sigframe_layout(&user, true)))
+		return;
+
+	signal_minsigstksz = sigframe_size(&user) +
+		round_up(sizeof(struct frame_record), 16) +
+		16; /* max alignment padding */
+}
+
+/*
+ * Compile-time assertions for siginfo_t offsets. Check NSIG* as well, as
+ * changes likely come with new fields that should be added below.
+ */
+static_assert(NSIGILL	== 11);
+static_assert(NSIGFPE	== 15);
+static_assert(NSIGSEGV	== 10);
+static_assert(NSIGBUS	== 5);
+static_assert(NSIGTRAP	== 6);
+static_assert(NSIGCHLD	== 6);
+static_assert(NSIGSYS	== 2);
+static_assert(sizeof(siginfo_t) == 128);
+static_assert(__alignof__(siginfo_t) == 8);
+static_assert(offsetof(siginfo_t, si_signo)	== 0x00);
+static_assert(offsetof(siginfo_t, si_errno)	== 0x04);
+static_assert(offsetof(siginfo_t, si_code)	== 0x08);
+static_assert(offsetof(siginfo_t, si_pid)	== 0x10);
+static_assert(offsetof(siginfo_t, si_uid)	== 0x14);
+static_assert(offsetof(siginfo_t, si_tid)	== 0x10);
+static_assert(offsetof(siginfo_t, si_overrun)	== 0x14);
+static_assert(offsetof(siginfo_t, si_status)	== 0x18);
+static_assert(offsetof(siginfo_t, si_utime)	== 0x20);
+static_assert(offsetof(siginfo_t, si_stime)	== 0x28);
+static_assert(offsetof(siginfo_t, si_value)	== 0x18);
+static_assert(offsetof(siginfo_t, si_int)	== 0x18);
+static_assert(offsetof(siginfo_t, si_ptr)	== 0x18);
+static_assert(offsetof(siginfo_t, si_addr)	== 0x10);
+static_assert(offsetof(siginfo_t, si_addr_lsb)	== 0x18);
+static_assert(offsetof(siginfo_t, si_lower)	== 0x20);
+static_assert(offsetof(siginfo_t, si_upper)	== 0x28);
+static_assert(offsetof(siginfo_t, si_pkey)	== 0x20);
+static_assert(offsetof(siginfo_t, si_perf_data)	== 0x18);
+static_assert(offsetof(siginfo_t, si_perf_type)	== 0x20);
+static_assert(offsetof(siginfo_t, si_perf_flags) == 0x24);
+static_assert(offsetof(siginfo_t, si_band)	== 0x10);
+static_assert(offsetof(siginfo_t, si_fd)	== 0x18);
+static_assert(offsetof(siginfo_t, si_call_addr)	== 0x10);
+static_assert(offsetof(siginfo_t, si_syscall)	== 0x18);
+static_assert(offsetof(siginfo_t, si_arch)	== 0x1c);
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
new file mode 100644
index 000000000..bbd542704
--- /dev/null
+++ b/arch/arm64/kernel/signal32.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/signal.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ * Modified by Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/compat.h>
+#include <linux/signal.h>
+#include <linux/syscalls.h>
+#include <linux/ratelimit.h>
+
+#include <asm/esr.h>
+#include <asm/fpsimd.h>
+#include <asm/signal32.h>
+#include <asm/traps.h>
+#include <linux/uaccess.h>
+#include <asm/unistd.h>
+#include <asm/vdso.h>
+
+struct compat_vfp_sigframe {
+	compat_ulong_t	magic;
+	compat_ulong_t	size;
+	struct compat_user_vfp {
+		compat_u64	fpregs[32];
+		compat_ulong_t	fpscr;
+	} ufp;
+	struct compat_user_vfp_exc {
+		compat_ulong_t	fpexc;
+		compat_ulong_t	fpinst;
+		compat_ulong_t	fpinst2;
+	} ufp_exc;
+} __attribute__((__aligned__(8)));
+
+#define VFP_MAGIC		0x56465001
+#define VFP_STORAGE_SIZE	sizeof(struct compat_vfp_sigframe)
+
+#define FSR_WRITE_SHIFT		(11)
+
+struct compat_aux_sigframe {
+	struct compat_vfp_sigframe	vfp;
+
+	/* Something that isn't a valid magic number for any coprocessor.  */
+	unsigned long			end_magic;
+} __attribute__((__aligned__(8)));
+
+static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
+{
+	compat_sigset_t	cset;
+
+	cset.sig[0] = set->sig[0] & 0xffffffffull;
+	cset.sig[1] = set->sig[0] >> 32;
+
+	return copy_to_user(uset, &cset, sizeof(*uset));
+}
+
+static inline int get_sigset_t(sigset_t *set,
+			       const compat_sigset_t __user *uset)
+{
+	compat_sigset_t s32;
+
+	if (copy_from_user(&s32, uset, sizeof(*uset)))
+		return -EFAULT;
+
+	set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
+	return 0;
+}
+
+/*
+ * VFP save/restore code.
+ *
+ * We have to be careful with endianness, since the fpsimd context-switch
+ * code operates on 128-bit (Q) register values whereas the compat ABI
+ * uses an array of 64-bit (D) registers. Consequently, we need to swap
+ * the two halves of each Q register when running on a big-endian CPU.
+ */
+union __fpsimd_vreg {
+	__uint128_t	raw;
+	struct {
+#ifdef __AARCH64EB__
+		u64	hi;
+		u64	lo;
+#else
+		u64	lo;
+		u64	hi;
+#endif
+	};
+};
+
+static int compat_preserve_vfp_context(struct compat_vfp_sigframe __user *frame)
+{
+	struct user_fpsimd_state const *fpsimd =
+		&current->thread.uw.fpsimd_state;
+	compat_ulong_t magic = VFP_MAGIC;
+	compat_ulong_t size = VFP_STORAGE_SIZE;
+	compat_ulong_t fpscr, fpexc;
+	int i, err = 0;
+
+	/*
+	 * Save the hardware registers to the fpsimd_state structure.
+	 * Note that this also saves V16-31, which aren't visible
+	 * in AArch32.
+	 */
+	fpsimd_signal_preserve_current_state();
+
+	/* Place structure header on the stack */
+	__put_user_error(magic, &frame->magic, err);
+	__put_user_error(size, &frame->size, err);
+
+	/*
+	 * Now copy the FP registers. Since the registers are packed,
+	 * we can copy the prefix we want (V0-V15) as it is.
+	 */
+	for (i = 0; i < ARRAY_SIZE(frame->ufp.fpregs); i += 2) {
+		union __fpsimd_vreg vreg = {
+			.raw = fpsimd->vregs[i >> 1],
+		};
+
+		__put_user_error(vreg.lo, &frame->ufp.fpregs[i], err);
+		__put_user_error(vreg.hi, &frame->ufp.fpregs[i + 1], err);
+	}
+
+	/* Create an AArch32 fpscr from the fpsr and the fpcr. */
+	fpscr = (fpsimd->fpsr & VFP_FPSCR_STAT_MASK) |
+		(fpsimd->fpcr & VFP_FPSCR_CTRL_MASK);
+	__put_user_error(fpscr, &frame->ufp.fpscr, err);
+
+	/*
+	 * The exception register aren't available so we fake up a
+	 * basic FPEXC and zero everything else.
+	 */
+	fpexc = (1 << 30);
+	__put_user_error(fpexc, &frame->ufp_exc.fpexc, err);
+	__put_user_error(0, &frame->ufp_exc.fpinst, err);
+	__put_user_error(0, &frame->ufp_exc.fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
+static int compat_restore_vfp_context(struct compat_vfp_sigframe __user *frame)
+{
+	struct user_fpsimd_state fpsimd;
+	compat_ulong_t magic = VFP_MAGIC;
+	compat_ulong_t size = VFP_STORAGE_SIZE;
+	compat_ulong_t fpscr;
+	int i, err = 0;
+
+	__get_user_error(magic, &frame->magic, err);
+	__get_user_error(size, &frame->size, err);
+
+	if (err)
+		return -EFAULT;
+	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
+		return -EINVAL;
+
+	/* Copy the FP registers into the start of the fpsimd_state. */
+	for (i = 0; i < ARRAY_SIZE(frame->ufp.fpregs); i += 2) {
+		union __fpsimd_vreg vreg;
+
+		__get_user_error(vreg.lo, &frame->ufp.fpregs[i], err);
+		__get_user_error(vreg.hi, &frame->ufp.fpregs[i + 1], err);
+		fpsimd.vregs[i >> 1] = vreg.raw;
+	}
+
+	/* Extract the fpsr and the fpcr from the fpscr */
+	__get_user_error(fpscr, &frame->ufp.fpscr, err);
+	fpsimd.fpsr = fpscr & VFP_FPSCR_STAT_MASK;
+	fpsimd.fpcr = fpscr & VFP_FPSCR_CTRL_MASK;
+
+	/*
+	 * We don't need to touch the exception register, so
+	 * reload the hardware state.
+	 */
+	if (!err)
+		fpsimd_update_current_state(&fpsimd);
+
+	return err ? -EFAULT : 0;
+}
+
+static int compat_restore_sigframe(struct pt_regs *regs,
+				   struct compat_sigframe __user *sf)
+{
+	int err;
+	sigset_t set;
+	struct compat_aux_sigframe __user *aux;
+	unsigned long psr;
+
+	err = get_sigset_t(&set, &sf->uc.uc_sigmask);
+	if (err == 0)
+		set_current_blocked(&set);
+
+	__get_user_error(regs->regs[0], &sf->uc.uc_mcontext.arm_r0, err);
+	__get_user_error(regs->regs[1], &sf->uc.uc_mcontext.arm_r1, err);
+	__get_user_error(regs->regs[2], &sf->uc.uc_mcontext.arm_r2, err);
+	__get_user_error(regs->regs[3], &sf->uc.uc_mcontext.arm_r3, err);
+	__get_user_error(regs->regs[4], &sf->uc.uc_mcontext.arm_r4, err);
+	__get_user_error(regs->regs[5], &sf->uc.uc_mcontext.arm_r5, err);
+	__get_user_error(regs->regs[6], &sf->uc.uc_mcontext.arm_r6, err);
+	__get_user_error(regs->regs[7], &sf->uc.uc_mcontext.arm_r7, err);
+	__get_user_error(regs->regs[8], &sf->uc.uc_mcontext.arm_r8, err);
+	__get_user_error(regs->regs[9], &sf->uc.uc_mcontext.arm_r9, err);
+	__get_user_error(regs->regs[10], &sf->uc.uc_mcontext.arm_r10, err);
+	__get_user_error(regs->regs[11], &sf->uc.uc_mcontext.arm_fp, err);
+	__get_user_error(regs->regs[12], &sf->uc.uc_mcontext.arm_ip, err);
+	__get_user_error(regs->compat_sp, &sf->uc.uc_mcontext.arm_sp, err);
+	__get_user_error(regs->compat_lr, &sf->uc.uc_mcontext.arm_lr, err);
+	__get_user_error(regs->pc, &sf->uc.uc_mcontext.arm_pc, err);
+	__get_user_error(psr, &sf->uc.uc_mcontext.arm_cpsr, err);
+
+	regs->pstate = compat_psr_to_pstate(psr);
+
+	/*
+	 * Avoid compat_sys_sigreturn() restarting.
+	 */
+	forget_syscall(regs);
+
+	err |= !valid_user_regs(&regs->user_regs, current);
+
+	aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace;
+	if (err == 0 && system_supports_fpsimd())
+		err |= compat_restore_vfp_context(&aux->vfp);
+
+	return err;
+}
+
+COMPAT_SYSCALL_DEFINE0(sigreturn)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct compat_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 64-bit boundary,
+	 * then 'sp' should be word aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (regs->compat_sp & 7)
+		goto badframe;
+
+	frame = (struct compat_sigframe __user *)regs->compat_sp;
+
+	if (!access_ok(frame, sizeof (*frame)))
+		goto badframe;
+
+	if (compat_restore_sigframe(regs, frame))
+		goto badframe;
+
+	return regs->regs[0];
+
+badframe:
+	arm64_notify_segfault(regs->compat_sp);
+	return 0;
+}
+
+COMPAT_SYSCALL_DEFINE0(rt_sigreturn)
+{
+	struct pt_regs *regs = current_pt_regs();
+	struct compat_rt_sigframe __user *frame;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	/*
+	 * Since we stacked the signal on a 64-bit boundary,
+	 * then 'sp' should be word aligned here.  If it's
+	 * not, then the user is trying to mess with us.
+	 */
+	if (regs->compat_sp & 7)
+		goto badframe;
+
+	frame = (struct compat_rt_sigframe __user *)regs->compat_sp;
+
+	if (!access_ok(frame, sizeof (*frame)))
+		goto badframe;
+
+	if (compat_restore_sigframe(regs, &frame->sig))
+		goto badframe;
+
+	if (compat_restore_altstack(&frame->sig.uc.uc_stack))
+		goto badframe;
+
+	return regs->regs[0];
+
+badframe:
+	arm64_notify_segfault(regs->compat_sp);
+	return 0;
+}
+
+static void __user *compat_get_sigframe(struct ksignal *ksig,
+					struct pt_regs *regs,
+					int framesize)
+{
+	compat_ulong_t sp = sigsp(regs->compat_sp, ksig);
+	void __user *frame;
+
+	/*
+	 * ATPCS B01 mandates 8-byte alignment
+	 */
+	frame = compat_ptr((compat_uptr_t)((sp - framesize) & ~7));
+
+	/*
+	 * Check that we can actually write to the signal frame.
+	 */
+	if (!access_ok(frame, framesize))
+		frame = NULL;
+
+	return frame;
+}
+
+static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka,
+				compat_ulong_t __user *rc, void __user *frame,
+				int usig)
+{
+	compat_ulong_t handler = ptr_to_compat(ka->sa.sa_handler);
+	compat_ulong_t retcode;
+	compat_ulong_t spsr = regs->pstate & ~(PSR_f | PSR_AA32_E_BIT);
+	int thumb;
+
+	/* Check if the handler is written for ARM or Thumb */
+	thumb = handler & 1;
+
+	if (thumb)
+		spsr |= PSR_AA32_T_BIT;
+	else
+		spsr &= ~PSR_AA32_T_BIT;
+
+	/* The IT state must be cleared for both ARM and Thumb-2 */
+	spsr &= ~PSR_AA32_IT_MASK;
+
+	/* Restore the original endianness */
+	spsr |= PSR_AA32_ENDSTATE;
+
+	if (ka->sa.sa_flags & SA_RESTORER) {
+		retcode = ptr_to_compat(ka->sa.sa_restorer);
+	} else {
+		/* Set up sigreturn pointer */
+		unsigned int idx = thumb << 1;
+
+		if (ka->sa.sa_flags & SA_SIGINFO)
+			idx += 3;
+
+		retcode = (unsigned long)current->mm->context.sigpage +
+			  (idx << 2) + thumb;
+	}
+
+	regs->regs[0]	= usig;
+	regs->compat_sp	= ptr_to_compat(frame);
+	regs->compat_lr	= retcode;
+	regs->pc	= handler;
+	regs->pstate	= spsr;
+}
+
+static int compat_setup_sigframe(struct compat_sigframe __user *sf,
+				 struct pt_regs *regs, sigset_t *set)
+{
+	struct compat_aux_sigframe __user *aux;
+	unsigned long psr = pstate_to_compat_psr(regs->pstate);
+	int err = 0;
+
+	__put_user_error(regs->regs[0], &sf->uc.uc_mcontext.arm_r0, err);
+	__put_user_error(regs->regs[1], &sf->uc.uc_mcontext.arm_r1, err);
+	__put_user_error(regs->regs[2], &sf->uc.uc_mcontext.arm_r2, err);
+	__put_user_error(regs->regs[3], &sf->uc.uc_mcontext.arm_r3, err);
+	__put_user_error(regs->regs[4], &sf->uc.uc_mcontext.arm_r4, err);
+	__put_user_error(regs->regs[5], &sf->uc.uc_mcontext.arm_r5, err);
+	__put_user_error(regs->regs[6], &sf->uc.uc_mcontext.arm_r6, err);
+	__put_user_error(regs->regs[7], &sf->uc.uc_mcontext.arm_r7, err);
+	__put_user_error(regs->regs[8], &sf->uc.uc_mcontext.arm_r8, err);
+	__put_user_error(regs->regs[9], &sf->uc.uc_mcontext.arm_r9, err);
+	__put_user_error(regs->regs[10], &sf->uc.uc_mcontext.arm_r10, err);
+	__put_user_error(regs->regs[11], &sf->uc.uc_mcontext.arm_fp, err);
+	__put_user_error(regs->regs[12], &sf->uc.uc_mcontext.arm_ip, err);
+	__put_user_error(regs->compat_sp, &sf->uc.uc_mcontext.arm_sp, err);
+	__put_user_error(regs->compat_lr, &sf->uc.uc_mcontext.arm_lr, err);
+	__put_user_error(regs->pc, &sf->uc.uc_mcontext.arm_pc, err);
+	__put_user_error(psr, &sf->uc.uc_mcontext.arm_cpsr, err);
+
+	__put_user_error((compat_ulong_t)0, &sf->uc.uc_mcontext.trap_no, err);
+	/* set the compat FSR WnR */
+	__put_user_error(!!(current->thread.fault_code & ESR_ELx_WNR) <<
+			 FSR_WRITE_SHIFT, &sf->uc.uc_mcontext.error_code, err);
+	__put_user_error(current->thread.fault_address, &sf->uc.uc_mcontext.fault_address, err);
+	__put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err);
+
+	err |= put_sigset_t(&sf->uc.uc_sigmask, set);
+
+	aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace;
+
+	if (err == 0 && system_supports_fpsimd())
+		err |= compat_preserve_vfp_context(&aux->vfp);
+	__put_user_error(0, &aux->end_magic, err);
+
+	return err;
+}
+
+/*
+ * 32-bit signal handling routines called from signal.c
+ */
+int compat_setup_rt_frame(int usig, struct ksignal *ksig,
+			  sigset_t *set, struct pt_regs *regs)
+{
+	struct compat_rt_sigframe __user *frame;
+	int err = 0;
+
+	frame = compat_get_sigframe(ksig, regs, sizeof(*frame));
+
+	if (!frame)
+		return 1;
+
+	err |= copy_siginfo_to_user32(&frame->info, &ksig->info);
+
+	__put_user_error(0, &frame->sig.uc.uc_flags, err);
+	__put_user_error(0, &frame->sig.uc.uc_link, err);
+
+	err |= __compat_save_altstack(&frame->sig.uc.uc_stack, regs->compat_sp);
+
+	err |= compat_setup_sigframe(&frame->sig, regs, set);
+
+	if (err == 0) {
+		compat_setup_return(regs, &ksig->ka, frame->sig.retcode, frame, usig);
+		regs->regs[1] = (compat_ulong_t)(unsigned long)&frame->info;
+		regs->regs[2] = (compat_ulong_t)(unsigned long)&frame->sig.uc;
+	}
+
+	return err;
+}
+
+int compat_setup_frame(int usig, struct ksignal *ksig, sigset_t *set,
+		       struct pt_regs *regs)
+{
+	struct compat_sigframe __user *frame;
+	int err = 0;
+
+	frame = compat_get_sigframe(ksig, regs, sizeof(*frame));
+
+	if (!frame)
+		return 1;
+
+	__put_user_error(0x5ac3c35a, &frame->uc.uc_flags, err);
+
+	err |= compat_setup_sigframe(frame, regs, set);
+	if (err == 0)
+		compat_setup_return(regs, &ksig->ka, frame->retcode, frame, usig);
+
+	return err;
+}
+
+void compat_setup_restart_syscall(struct pt_regs *regs)
+{
+       regs->regs[7] = __NR_compat_restart_syscall;
+}
+
+/*
+ * Compile-time assertions for siginfo_t offsets. Check NSIG* as well, as
+ * changes likely come with new fields that should be added below.
+ */
+static_assert(NSIGILL	== 11);
+static_assert(NSIGFPE	== 15);
+static_assert(NSIGSEGV	== 10);
+static_assert(NSIGBUS	== 5);
+static_assert(NSIGTRAP	== 6);
+static_assert(NSIGCHLD	== 6);
+static_assert(NSIGSYS	== 2);
+static_assert(sizeof(compat_siginfo_t) == 128);
+static_assert(__alignof__(compat_siginfo_t) == 4);
+static_assert(offsetof(compat_siginfo_t, si_signo)	== 0x00);
+static_assert(offsetof(compat_siginfo_t, si_errno)	== 0x04);
+static_assert(offsetof(compat_siginfo_t, si_code)	== 0x08);
+static_assert(offsetof(compat_siginfo_t, si_pid)	== 0x0c);
+static_assert(offsetof(compat_siginfo_t, si_uid)	== 0x10);
+static_assert(offsetof(compat_siginfo_t, si_tid)	== 0x0c);
+static_assert(offsetof(compat_siginfo_t, si_overrun)	== 0x10);
+static_assert(offsetof(compat_siginfo_t, si_status)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_utime)	== 0x18);
+static_assert(offsetof(compat_siginfo_t, si_stime)	== 0x1c);
+static_assert(offsetof(compat_siginfo_t, si_value)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_int)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_ptr)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_addr)	== 0x0c);
+static_assert(offsetof(compat_siginfo_t, si_addr_lsb)	== 0x10);
+static_assert(offsetof(compat_siginfo_t, si_lower)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_upper)	== 0x18);
+static_assert(offsetof(compat_siginfo_t, si_pkey)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_perf_data)	== 0x10);
+static_assert(offsetof(compat_siginfo_t, si_perf_type)	== 0x14);
+static_assert(offsetof(compat_siginfo_t, si_perf_flags)	== 0x18);
+static_assert(offsetof(compat_siginfo_t, si_band)	== 0x0c);
+static_assert(offsetof(compat_siginfo_t, si_fd)		== 0x10);
+static_assert(offsetof(compat_siginfo_t, si_call_addr)	== 0x0c);
+static_assert(offsetof(compat_siginfo_t, si_syscall)	== 0x10);
+static_assert(offsetof(compat_siginfo_t, si_arch)	== 0x14);
diff --git a/arch/arm64/kernel/sigreturn32.S b/arch/arm64/kernel/sigreturn32.S
new file mode 100644
index 000000000..ccbd4aab4
--- /dev/null
+++ b/arch/arm64/kernel/sigreturn32.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AArch32 sigreturn code.
+ * Based on the kuser helpers in arch/arm/kernel/entry-armv.S.
+ *
+ * Copyright (C) 2005-2011 Nicolas Pitre <nico@fluxnic.net>
+ * Copyright (C) 2012-2018 ARM Ltd.
+ *
+ * For ARM syscalls, the syscall number has to be loaded into r7.
+ * We do not support an OABI userspace.
+ *
+ * For Thumb syscalls, we also pass the syscall number via r7. We therefore
+ * need two 16-bit instructions.
+ */
+
+#include <asm/unistd.h>
+
+	.section .rodata
+	.globl __aarch32_sigret_code_start
+__aarch32_sigret_code_start:
+
+	/*
+	 * ARM Code
+	 */
+	.byte	__NR_compat_sigreturn, 0x70, 0xa0, 0xe3		// mov	r7, #__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0x00, 0x00, 0xef		// svc	#__NR_compat_sigreturn
+
+	/*
+	 * Thumb code
+	 */
+	.byte	__NR_compat_sigreturn, 0x27			// svc	#__NR_compat_sigreturn
+	.byte	__NR_compat_sigreturn, 0xdf			// mov	r7, #__NR_compat_sigreturn
+
+	/*
+	 * ARM code
+	 */
+	.byte	__NR_compat_rt_sigreturn, 0x70, 0xa0, 0xe3	// mov	r7, #__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0x00, 0x00, 0xef	// svc	#__NR_compat_rt_sigreturn
+
+	/*
+	 * Thumb code
+	 */
+	.byte	__NR_compat_rt_sigreturn, 0x27			// svc	#__NR_compat_rt_sigreturn
+	.byte	__NR_compat_rt_sigreturn, 0xdf			// mov	r7, #__NR_compat_rt_sigreturn
+
+        .globl __aarch32_sigret_code_end
+__aarch32_sigret_code_end:
diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
new file mode 100644
index 000000000..2aa5129d8
--- /dev/null
+++ b/arch/arm64/kernel/sleep.S
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/smp.h>
+
+	.text
+/*
+ * Implementation of MPIDR_EL1 hash algorithm through shifting
+ * and OR'ing.
+ *
+ * @dst: register containing hash result
+ * @rs0: register containing affinity level 0 bit shift
+ * @rs1: register containing affinity level 1 bit shift
+ * @rs2: register containing affinity level 2 bit shift
+ * @rs3: register containing affinity level 3 bit shift
+ * @mpidr: register containing MPIDR_EL1 value
+ * @mask: register containing MPIDR mask
+ *
+ * Pseudo C-code:
+ *
+ *u32 dst;
+ *
+ *compute_mpidr_hash(u32 rs0, u32 rs1, u32 rs2, u32 rs3, u64 mpidr, u64 mask) {
+ *	u32 aff0, aff1, aff2, aff3;
+ *	u64 mpidr_masked = mpidr & mask;
+ *	aff0 = mpidr_masked & 0xff;
+ *	aff1 = mpidr_masked & 0xff00;
+ *	aff2 = mpidr_masked & 0xff0000;
+ *	aff3 = mpidr_masked & 0xff00000000;
+ *	dst = (aff0 >> rs0 | aff1 >> rs1 | aff2 >> rs2 | aff3 >> rs3);
+ *}
+ * Input registers: rs0, rs1, rs2, rs3, mpidr, mask
+ * Output register: dst
+ * Note: input and output registers must be disjoint register sets
+         (eg: a macro instance with mpidr = x1 and dst = x1 is invalid)
+ */
+	.macro compute_mpidr_hash dst, rs0, rs1, rs2, rs3, mpidr, mask
+	and	\mpidr, \mpidr, \mask		// mask out MPIDR bits
+	and	\dst, \mpidr, #0xff		// mask=aff0
+	lsr	\dst ,\dst, \rs0		// dst=aff0>>rs0
+	and	\mask, \mpidr, #0xff00		// mask = aff1
+	lsr	\mask ,\mask, \rs1
+	orr	\dst, \dst, \mask		// dst|=(aff1>>rs1)
+	and	\mask, \mpidr, #0xff0000	// mask = aff2
+	lsr	\mask ,\mask, \rs2
+	orr	\dst, \dst, \mask		// dst|=(aff2>>rs2)
+	and	\mask, \mpidr, #0xff00000000	// mask = aff3
+	lsr	\mask ,\mask, \rs3
+	orr	\dst, \dst, \mask		// dst|=(aff3>>rs3)
+	.endm
+/*
+ * Save CPU state in the provided sleep_stack_data area, and publish its
+ * location for cpu_resume()'s use in sleep_save_stash.
+ *
+ * cpu_resume() will restore this saved state, and return. Because the
+ * link-register is saved and restored, it will appear to return from this
+ * function. So that the caller can tell the suspend/resume paths apart,
+ * __cpu_suspend_enter() will always return a non-zero value, whereas the
+ * path through cpu_resume() will return 0.
+ *
+ *  x0 = struct sleep_stack_data area
+ */
+SYM_FUNC_START(__cpu_suspend_enter)
+	stp	x29, lr, [x0, #SLEEP_STACK_DATA_CALLEE_REGS]
+	stp	x19, x20, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+16]
+	stp	x21, x22, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+32]
+	stp	x23, x24, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+48]
+	stp	x25, x26, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+64]
+	stp	x27, x28, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+80]
+
+	/* save the sp in cpu_suspend_ctx */
+	mov	x2, sp
+	str	x2, [x0, #SLEEP_STACK_DATA_SYSTEM_REGS + CPU_CTX_SP]
+
+	/* find the mpidr_hash */
+	ldr_l	x1, sleep_save_stash
+	mrs	x7, mpidr_el1
+	adr_l	x9, mpidr_hash
+	ldr	x10, [x9, #MPIDR_HASH_MASK]
+	/*
+	 * Following code relies on the struct mpidr_hash
+	 * members size.
+	 */
+	ldp	w3, w4, [x9, #MPIDR_HASH_SHIFTS]
+	ldp	w5, w6, [x9, #(MPIDR_HASH_SHIFTS + 8)]
+	compute_mpidr_hash x8, x3, x4, x5, x6, x7, x10
+	add	x1, x1, x8, lsl #3
+
+	str	x0, [x1]
+	add	x0, x0, #SLEEP_STACK_DATA_SYSTEM_REGS
+	stp	x29, lr, [sp, #-16]!
+	bl	cpu_do_suspend
+	ldp	x29, lr, [sp], #16
+	mov	x0, #1
+	ret
+SYM_FUNC_END(__cpu_suspend_enter)
+
+	.pushsection ".idmap.text", "a"
+SYM_CODE_START(cpu_resume)
+	mov	x0, xzr
+	bl	init_kernel_el
+	mov	x19, x0			// preserve boot mode
+#if VA_BITS > 48
+	ldr_l	x0, vabits_actual
+#endif
+	bl	__cpu_setup
+	/* enable the MMU early - so we can access sleep_save_stash by va */
+	adrp	x1, swapper_pg_dir
+	adrp	x2, idmap_pg_dir
+	bl	__enable_mmu
+	ldr	x8, =_cpu_resume
+	br	x8
+SYM_CODE_END(cpu_resume)
+	.ltorg
+	.popsection
+
+SYM_FUNC_START(_cpu_resume)
+	mov	x0, x19
+	bl	finalise_el2
+
+	mrs	x1, mpidr_el1
+	adr_l	x8, mpidr_hash		// x8 = struct mpidr_hash virt address
+
+	/* retrieve mpidr_hash members to compute the hash */
+	ldr	x2, [x8, #MPIDR_HASH_MASK]
+	ldp	w3, w4, [x8, #MPIDR_HASH_SHIFTS]
+	ldp	w5, w6, [x8, #(MPIDR_HASH_SHIFTS + 8)]
+	compute_mpidr_hash x7, x3, x4, x5, x6, x1, x2
+
+	/* x7 contains hash index, let's use it to grab context pointer */
+	ldr_l	x0, sleep_save_stash
+	ldr	x0, [x0, x7, lsl #3]
+	add	x29, x0, #SLEEP_STACK_DATA_CALLEE_REGS
+	add	x0, x0, #SLEEP_STACK_DATA_SYSTEM_REGS
+	/* load sp from context */
+	ldr	x2, [x0, #CPU_CTX_SP]
+	mov	sp, x2
+	/*
+	 * cpu_do_resume expects x0 to contain context address pointer
+	 */
+	bl	cpu_do_resume
+
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	x0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
+
+	ldp	x19, x20, [x29, #16]
+	ldp	x21, x22, [x29, #32]
+	ldp	x23, x24, [x29, #48]
+	ldp	x25, x26, [x29, #64]
+	ldp	x27, x28, [x29, #80]
+	ldp	x29, lr, [x29]
+	mov	x0, #0
+	ret
+SYM_FUNC_END(_cpu_resume)
diff --git a/arch/arm64/kernel/smccc-call.S b/arch/arm64/kernel/smccc-call.S
new file mode 100644
index 000000000..487381164
--- /dev/null
+++ b/arch/arm64/kernel/smccc-call.S
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015, Linaro Limited
+ */
+#include <linux/linkage.h>
+#include <linux/arm-smccc.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/thread_info.h>
+
+/*
+ * If we have SMCCC v1.3 and (as is likely) no SVE state in
+ * the registers then set the SMCCC hint bit to say there's no
+ * need to preserve it.  Do this by directly adjusting the SMCCC
+ * function value which is already stored in x0 ready to be called.
+ */
+SYM_FUNC_START(__arm_smccc_sve_check)
+
+	ldr_l	x16, smccc_has_sve_hint
+	cbz	x16, 2f
+
+	get_current_task x16
+	ldr	x16, [x16, #TSK_TI_FLAGS]
+	tbnz	x16, #TIF_FOREIGN_FPSTATE, 1f	// Any live FP state?
+	tbnz	x16, #TIF_SVE, 2f		// Does that state include SVE?
+
+1:	orr	x0, x0, ARM_SMCCC_1_3_SVE_HINT
+
+2:	ret
+SYM_FUNC_END(__arm_smccc_sve_check)
+EXPORT_SYMBOL(__arm_smccc_sve_check)
+
+	.macro SMCCC instr
+	stp     x29, x30, [sp, #-16]!
+	mov	x29, sp
+alternative_if ARM64_SVE
+	bl	__arm_smccc_sve_check
+alternative_else_nop_endif
+	\instr	#0
+	ldr	x4, [sp, #16]
+	stp	x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
+	stp	x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
+	ldr	x4, [sp, #24]
+	cbz	x4, 1f /* no quirk structure */
+	ldr	x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp	x9, #ARM_SMCCC_QUIRK_QCOM_A6
+	b.ne	1f
+	str	x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	ldp     x29, x30, [sp], #16
+	ret
+	.endm
+
+/*
+ * void arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
+ */
+SYM_FUNC_START(__arm_smccc_smc)
+	SMCCC	smc
+SYM_FUNC_END(__arm_smccc_smc)
+EXPORT_SYMBOL(__arm_smccc_smc)
+
+/*
+ * void arm_smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
+ */
+SYM_FUNC_START(__arm_smccc_hvc)
+	SMCCC	hvc
+SYM_FUNC_END(__arm_smccc_hvc)
+EXPORT_SYMBOL(__arm_smccc_hvc)
+
+	.macro SMCCC_1_2 instr
+	/* Save `res` and free a GPR that won't be clobbered */
+	stp     x1, x19, [sp, #-16]!
+
+	/* Ensure `args` won't be clobbered while loading regs in next step */
+	mov	x19, x0
+
+	/* Load the registers x0 - x17 from the struct arm_smccc_1_2_regs */
+	ldp	x0, x1, [x19, #ARM_SMCCC_1_2_REGS_X0_OFFS]
+	ldp	x2, x3, [x19, #ARM_SMCCC_1_2_REGS_X2_OFFS]
+	ldp	x4, x5, [x19, #ARM_SMCCC_1_2_REGS_X4_OFFS]
+	ldp	x6, x7, [x19, #ARM_SMCCC_1_2_REGS_X6_OFFS]
+	ldp	x8, x9, [x19, #ARM_SMCCC_1_2_REGS_X8_OFFS]
+	ldp	x10, x11, [x19, #ARM_SMCCC_1_2_REGS_X10_OFFS]
+	ldp	x12, x13, [x19, #ARM_SMCCC_1_2_REGS_X12_OFFS]
+	ldp	x14, x15, [x19, #ARM_SMCCC_1_2_REGS_X14_OFFS]
+	ldp	x16, x17, [x19, #ARM_SMCCC_1_2_REGS_X16_OFFS]
+
+	\instr #0
+
+	/* Load the `res` from the stack */
+	ldr	x19, [sp]
+
+	/* Store the registers x0 - x17 into the result structure */
+	stp	x0, x1, [x19, #ARM_SMCCC_1_2_REGS_X0_OFFS]
+	stp	x2, x3, [x19, #ARM_SMCCC_1_2_REGS_X2_OFFS]
+	stp	x4, x5, [x19, #ARM_SMCCC_1_2_REGS_X4_OFFS]
+	stp	x6, x7, [x19, #ARM_SMCCC_1_2_REGS_X6_OFFS]
+	stp	x8, x9, [x19, #ARM_SMCCC_1_2_REGS_X8_OFFS]
+	stp	x10, x11, [x19, #ARM_SMCCC_1_2_REGS_X10_OFFS]
+	stp	x12, x13, [x19, #ARM_SMCCC_1_2_REGS_X12_OFFS]
+	stp	x14, x15, [x19, #ARM_SMCCC_1_2_REGS_X14_OFFS]
+	stp	x16, x17, [x19, #ARM_SMCCC_1_2_REGS_X16_OFFS]
+
+	/* Restore original x19 */
+	ldp     xzr, x19, [sp], #16
+	ret
+.endm
+
+/*
+ * void arm_smccc_1_2_hvc(const struct arm_smccc_1_2_regs *args,
+ *			  struct arm_smccc_1_2_regs *res);
+ */
+SYM_FUNC_START(arm_smccc_1_2_hvc)
+	SMCCC_1_2 hvc
+SYM_FUNC_END(arm_smccc_1_2_hvc)
+EXPORT_SYMBOL(arm_smccc_1_2_hvc)
+
+/*
+ * void arm_smccc_1_2_smc(const struct arm_smccc_1_2_regs *args,
+ *			  struct arm_smccc_1_2_regs *res);
+ */
+SYM_FUNC_START(arm_smccc_1_2_smc)
+	SMCCC_1_2 smc
+SYM_FUNC_END(arm_smccc_1_2_smc)
+EXPORT_SYMBOL(arm_smccc_1_2_smc)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
new file mode 100644
index 000000000..960b98b43
--- /dev/null
+++ b/arch/arm64/kernel/smp.c
@@ -0,0 +1,1096 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SMP initialisation and IPI support
+ * Based on arch/arm/kernel/smp.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/arm_sdei.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched/mm.h>
+#include <linux/sched/hotplug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/interrupt.h>
+#include <linux/cache.h>
+#include <linux/profile.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/err.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/irq_work.h>
+#include <linux/kernel_stat.h>
+#include <linux/kexec.h>
+#include <linux/kvm_host.h>
+
+#include <asm/alternative.h>
+#include <asm/atomic.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpu_ops.h>
+#include <asm/daifflags.h>
+#include <asm/kvm_mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/numa.h>
+#include <asm/processor.h>
+#include <asm/smp_plat.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/ptrace.h>
+#include <asm/virt.h>
+
+#include <trace/events/ipi.h>
+
+DEFINE_PER_CPU_READ_MOSTLY(int, cpu_number);
+EXPORT_PER_CPU_SYMBOL(cpu_number);
+
+/*
+ * as from 2.5, kernels no longer have an init_tasks structure
+ * so we need some other way of telling a new secondary core
+ * where to place its SVC stack
+ */
+struct secondary_data secondary_data;
+/* Number of CPUs which aren't online, but looping in kernel text. */
+static int cpus_stuck_in_kernel;
+
+enum ipi_msg_type {
+	IPI_RESCHEDULE,
+	IPI_CALL_FUNC,
+	IPI_CPU_STOP,
+	IPI_CPU_CRASH_STOP,
+	IPI_TIMER,
+	IPI_IRQ_WORK,
+	IPI_WAKEUP,
+	NR_IPI
+};
+
+static int ipi_irq_base __read_mostly;
+static int nr_ipi __read_mostly = NR_IPI;
+static struct irq_desc *ipi_desc[NR_IPI] __read_mostly;
+
+static void ipi_setup(int cpu);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void ipi_teardown(int cpu);
+static int op_cpu_kill(unsigned int cpu);
+#else
+static inline int op_cpu_kill(unsigned int cpu)
+{
+	return -ENOSYS;
+}
+#endif
+
+
+/*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+static int boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	const struct cpu_operations *ops = get_cpu_ops(cpu);
+
+	if (ops->cpu_boot)
+		return ops->cpu_boot(cpu);
+
+	return -EOPNOTSUPP;
+}
+
+static DECLARE_COMPLETION(cpu_running);
+
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
+{
+	int ret;
+	long status;
+
+	/*
+	 * We need to tell the secondary core where to find its stack and the
+	 * page tables.
+	 */
+	secondary_data.task = idle;
+	update_cpu_boot_status(CPU_MMU_OFF);
+
+	/* Now bring the CPU into our world */
+	ret = boot_secondary(cpu, idle);
+	if (ret) {
+		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
+		return ret;
+	}
+
+	/*
+	 * CPU was successfully started, wait for it to come online or
+	 * time out.
+	 */
+	wait_for_completion_timeout(&cpu_running,
+				    msecs_to_jiffies(5000));
+	if (cpu_online(cpu))
+		return 0;
+
+	pr_crit("CPU%u: failed to come online\n", cpu);
+	secondary_data.task = NULL;
+	status = READ_ONCE(secondary_data.status);
+	if (status == CPU_MMU_OFF)
+		status = READ_ONCE(__early_cpu_boot_status);
+
+	switch (status & CPU_BOOT_STATUS_MASK) {
+	default:
+		pr_err("CPU%u: failed in unknown state : 0x%lx\n",
+		       cpu, status);
+		cpus_stuck_in_kernel++;
+		break;
+	case CPU_KILL_ME:
+		if (!op_cpu_kill(cpu)) {
+			pr_crit("CPU%u: died during early boot\n", cpu);
+			break;
+		}
+		pr_crit("CPU%u: may not have shut down cleanly\n", cpu);
+		fallthrough;
+	case CPU_STUCK_IN_KERNEL:
+		pr_crit("CPU%u: is stuck in kernel\n", cpu);
+		if (status & CPU_STUCK_REASON_52_BIT_VA)
+			pr_crit("CPU%u: does not support 52-bit VAs\n", cpu);
+		if (status & CPU_STUCK_REASON_NO_GRAN) {
+			pr_crit("CPU%u: does not support %luK granule\n",
+				cpu, PAGE_SIZE / SZ_1K);
+		}
+		cpus_stuck_in_kernel++;
+		break;
+	case CPU_PANIC_KERNEL:
+		panic("CPU%u detected unsupported configuration\n", cpu);
+	}
+
+	return -EIO;
+}
+
+static void init_gic_priority_masking(void)
+{
+	u32 cpuflags;
+
+	if (WARN_ON(!gic_enable_sre()))
+		return;
+
+	cpuflags = read_sysreg(daif);
+
+	WARN_ON(!(cpuflags & PSR_I_BIT));
+	WARN_ON(!(cpuflags & PSR_F_BIT));
+
+	gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+}
+
+/*
+ * This is the secondary CPU boot entry.  We're using this CPUs
+ * idle thread stack, but a set of temporary page tables.
+ */
+asmlinkage notrace void secondary_start_kernel(void)
+{
+	u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
+	struct mm_struct *mm = &init_mm;
+	const struct cpu_operations *ops;
+	unsigned int cpu = smp_processor_id();
+
+	/*
+	 * All kernel threads share the same mm context; grab a
+	 * reference and switch to it.
+	 */
+	mmgrab(mm);
+	current->active_mm = mm;
+
+	/*
+	 * TTBR0 is only used for the identity mapping at this stage. Make it
+	 * point to zero page to avoid speculatively fetching new entries.
+	 */
+	cpu_uninstall_idmap();
+
+	if (system_uses_irq_prio_masking())
+		init_gic_priority_masking();
+
+	rcu_cpu_starting(cpu);
+	trace_hardirqs_off();
+
+	/*
+	 * If the system has established the capabilities, make sure
+	 * this CPU ticks all of those. If it doesn't, the CPU will
+	 * fail to come online.
+	 */
+	check_local_cpu_capabilities();
+
+	ops = get_cpu_ops(cpu);
+	if (ops->cpu_postboot)
+		ops->cpu_postboot();
+
+	/*
+	 * Log the CPU info before it is marked online and might get read.
+	 */
+	cpuinfo_store_cpu();
+	store_cpu_topology(cpu);
+
+	/*
+	 * Enable GIC and timers.
+	 */
+	notify_cpu_starting(cpu);
+
+	ipi_setup(cpu);
+
+	numa_add_cpu(cpu);
+
+	/*
+	 * OK, now it's safe to let the boot CPU continue.  Wait for
+	 * the CPU migration code to notice that the CPU is online
+	 * before we continue.
+	 */
+	pr_info("CPU%u: Booted secondary processor 0x%010lx [0x%08x]\n",
+					 cpu, (unsigned long)mpidr,
+					 read_cpuid_id());
+	update_cpu_boot_status(CPU_BOOT_SUCCESS);
+	set_cpu_online(cpu, true);
+	complete(&cpu_running);
+
+	local_daif_restore(DAIF_PROCCTX);
+
+	/*
+	 * OK, it's off to the idle thread for us
+	 */
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int op_cpu_disable(unsigned int cpu)
+{
+	const struct cpu_operations *ops = get_cpu_ops(cpu);
+
+	/*
+	 * If we don't have a cpu_die method, abort before we reach the point
+	 * of no return. CPU0 may not have an cpu_ops, so test for it.
+	 */
+	if (!ops || !ops->cpu_die)
+		return -EOPNOTSUPP;
+
+	/*
+	 * We may need to abort a hot unplug for some other mechanism-specific
+	 * reason.
+	 */
+	if (ops->cpu_disable)
+		return ops->cpu_disable(cpu);
+
+	return 0;
+}
+
+/*
+ * __cpu_disable runs on the processor to be shutdown.
+ */
+int __cpu_disable(void)
+{
+	unsigned int cpu = smp_processor_id();
+	int ret;
+
+	ret = op_cpu_disable(cpu);
+	if (ret)
+		return ret;
+
+	remove_cpu_topology(cpu);
+	numa_remove_cpu(cpu);
+
+	/*
+	 * Take this CPU offline.  Once we clear this, we can't return,
+	 * and we must not schedule until we're ready to give up the cpu.
+	 */
+	set_cpu_online(cpu, false);
+	ipi_teardown(cpu);
+
+	/*
+	 * OK - migrate IRQs away from this CPU
+	 */
+	irq_migrate_all_off_this_cpu();
+
+	return 0;
+}
+
+static int op_cpu_kill(unsigned int cpu)
+{
+	const struct cpu_operations *ops = get_cpu_ops(cpu);
+
+	/*
+	 * If we have no means of synchronising with the dying CPU, then assume
+	 * that it is really dead. We can only wait for an arbitrary length of
+	 * time and hope that it's dead, so let's skip the wait and just hope.
+	 */
+	if (!ops->cpu_kill)
+		return 0;
+
+	return ops->cpu_kill(cpu);
+}
+
+/*
+ * Called on the thread which is asking for a CPU to be shutdown after the
+ * shutdown completed.
+ */
+void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)
+{
+	int err;
+
+	pr_debug("CPU%u: shutdown\n", cpu);
+
+	/*
+	 * Now that the dying CPU is beyond the point of no return w.r.t.
+	 * in-kernel synchronisation, try to get the firwmare to help us to
+	 * verify that it has really left the kernel before we consider
+	 * clobbering anything it might still be using.
+	 */
+	err = op_cpu_kill(cpu);
+	if (err)
+		pr_warn("CPU%d may not have shut down cleanly: %d\n", cpu, err);
+}
+
+/*
+ * Called from the idle thread for the CPU which has been shutdown.
+ *
+ */
+void __noreturn cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+	const struct cpu_operations *ops = get_cpu_ops(cpu);
+
+	idle_task_exit();
+
+	local_daif_mask();
+
+	/* Tell cpuhp_bp_sync_dead() that this CPU is now safe to dispose of */
+	cpuhp_ap_report_dead();
+
+	/*
+	 * Actually shutdown the CPU. This must never fail. The specific hotplug
+	 * mechanism must perform all required cache maintenance to ensure that
+	 * no dirty lines are lost in the process of shutting down the CPU.
+	 */
+	ops->cpu_die(cpu);
+
+	BUG();
+}
+#endif
+
+static void __cpu_try_die(int cpu)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	const struct cpu_operations *ops = get_cpu_ops(cpu);
+
+	if (ops && ops->cpu_die)
+		ops->cpu_die(cpu);
+#endif
+}
+
+/*
+ * Kill the calling secondary CPU, early in bringup before it is turned
+ * online.
+ */
+void __noreturn cpu_die_early(void)
+{
+	int cpu = smp_processor_id();
+
+	pr_crit("CPU%d: will not boot\n", cpu);
+
+	/* Mark this CPU absent */
+	set_cpu_present(cpu, 0);
+	rcu_report_dead(cpu);
+
+	if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
+		update_cpu_boot_status(CPU_KILL_ME);
+		__cpu_try_die(cpu);
+	}
+
+	update_cpu_boot_status(CPU_STUCK_IN_KERNEL);
+
+	cpu_park_loop();
+}
+
+static void __init hyp_mode_check(void)
+{
+	if (is_hyp_mode_available())
+		pr_info("CPU: All CPU(s) started at EL2\n");
+	else if (is_hyp_mode_mismatched())
+		WARN_TAINT(1, TAINT_CPU_OUT_OF_SPEC,
+			   "CPU: CPUs started in inconsistent modes");
+	else
+		pr_info("CPU: All CPU(s) started at EL1\n");
+	if (IS_ENABLED(CONFIG_KVM) && !is_kernel_in_hyp_mode()) {
+		kvm_compute_layout();
+		kvm_apply_hyp_relocations();
+	}
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+	pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
+	setup_cpu_features();
+	hyp_mode_check();
+	apply_alternatives_all();
+	mark_linear_text_alias_ro();
+}
+
+void __init smp_prepare_boot_cpu(void)
+{
+	/*
+	 * The runtime per-cpu areas have been allocated by
+	 * setup_per_cpu_areas(), and CPU0's boot time per-cpu area will be
+	 * freed shortly, so we must move over to the runtime per-cpu area.
+	 */
+	set_my_cpu_offset(per_cpu_offset(smp_processor_id()));
+	cpuinfo_store_boot_cpu();
+
+	/*
+	 * We now know enough about the boot CPU to apply the
+	 * alternatives that cannot wait until interrupt handling
+	 * and/or scheduling is enabled.
+	 */
+	apply_boot_alternatives();
+
+	/* Conditionally switch to GIC PMR for interrupt masking */
+	if (system_uses_irq_prio_masking())
+		init_gic_priority_masking();
+
+	kasan_init_hw_tags();
+}
+
+/*
+ * Duplicate MPIDRs are a recipe for disaster. Scan all initialized
+ * entries and check for duplicates. If any is found just ignore the
+ * cpu. cpu_logical_map was initialized to INVALID_HWID to avoid
+ * matching valid MPIDR values.
+ */
+static bool __init is_mpidr_duplicate(unsigned int cpu, u64 hwid)
+{
+	unsigned int i;
+
+	for (i = 1; (i < cpu) && (i < NR_CPUS); i++)
+		if (cpu_logical_map(i) == hwid)
+			return true;
+	return false;
+}
+
+/*
+ * Initialize cpu operations for a logical cpu and
+ * set it in the possible mask on success
+ */
+static int __init smp_cpu_setup(int cpu)
+{
+	const struct cpu_operations *ops;
+
+	if (init_cpu_ops(cpu))
+		return -ENODEV;
+
+	ops = get_cpu_ops(cpu);
+	if (ops->cpu_init(cpu))
+		return -ENODEV;
+
+	set_cpu_possible(cpu, true);
+
+	return 0;
+}
+
+static bool bootcpu_valid __initdata;
+static unsigned int cpu_count = 1;
+
+#ifdef CONFIG_ACPI
+static struct acpi_madt_generic_interrupt cpu_madt_gicc[NR_CPUS];
+
+struct acpi_madt_generic_interrupt *acpi_cpu_get_madt_gicc(int cpu)
+{
+	return &cpu_madt_gicc[cpu];
+}
+EXPORT_SYMBOL_GPL(acpi_cpu_get_madt_gicc);
+
+/*
+ * acpi_map_gic_cpu_interface - parse processor MADT entry
+ *
+ * Carry out sanity checks on MADT processor entry and initialize
+ * cpu_logical_map on success
+ */
+static void __init
+acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
+{
+	u64 hwid = processor->arm_mpidr;
+
+	if (!(processor->flags & ACPI_MADT_ENABLED)) {
+		pr_debug("skipping disabled CPU entry with 0x%llx MPIDR\n", hwid);
+		return;
+	}
+
+	if (hwid & ~MPIDR_HWID_BITMASK || hwid == INVALID_HWID) {
+		pr_err("skipping CPU entry with invalid MPIDR 0x%llx\n", hwid);
+		return;
+	}
+
+	if (is_mpidr_duplicate(cpu_count, hwid)) {
+		pr_err("duplicate CPU MPIDR 0x%llx in MADT\n", hwid);
+		return;
+	}
+
+	/* Check if GICC structure of boot CPU is available in the MADT */
+	if (cpu_logical_map(0) == hwid) {
+		if (bootcpu_valid) {
+			pr_err("duplicate boot CPU MPIDR: 0x%llx in MADT\n",
+			       hwid);
+			return;
+		}
+		bootcpu_valid = true;
+		cpu_madt_gicc[0] = *processor;
+		return;
+	}
+
+	if (cpu_count >= NR_CPUS)
+		return;
+
+	/* map the logical cpu id to cpu MPIDR */
+	set_cpu_logical_map(cpu_count, hwid);
+
+	cpu_madt_gicc[cpu_count] = *processor;
+
+	/*
+	 * Set-up the ACPI parking protocol cpu entries
+	 * while initializing the cpu_logical_map to
+	 * avoid parsing MADT entries multiple times for
+	 * nothing (ie a valid cpu_logical_map entry should
+	 * contain a valid parking protocol data set to
+	 * initialize the cpu if the parking protocol is
+	 * the only available enable method).
+	 */
+	acpi_set_mailbox_entry(cpu_count, processor);
+
+	cpu_count++;
+}
+
+static int __init
+acpi_parse_gic_cpu_interface(union acpi_subtable_headers *header,
+			     const unsigned long end)
+{
+	struct acpi_madt_generic_interrupt *processor;
+
+	processor = (struct acpi_madt_generic_interrupt *)header;
+	if (BAD_MADT_GICC_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(&header->common);
+
+	acpi_map_gic_cpu_interface(processor);
+
+	return 0;
+}
+
+static void __init acpi_parse_and_init_cpus(void)
+{
+	int i;
+
+	/*
+	 * do a walk of MADT to determine how many CPUs
+	 * we have including disabled CPUs, and get information
+	 * we need for SMP init.
+	 */
+	acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
+				      acpi_parse_gic_cpu_interface, 0);
+
+	/*
+	 * In ACPI, SMP and CPU NUMA information is provided in separate
+	 * static tables, namely the MADT and the SRAT.
+	 *
+	 * Thus, it is simpler to first create the cpu logical map through
+	 * an MADT walk and then map the logical cpus to their node ids
+	 * as separate steps.
+	 */
+	acpi_map_cpus_to_nodes();
+
+	for (i = 0; i < nr_cpu_ids; i++)
+		early_map_cpu_to_node(i, acpi_numa_get_nid(i));
+}
+#else
+#define acpi_parse_and_init_cpus(...)	do { } while (0)
+#endif
+
+/*
+ * Enumerate the possible CPU set from the device tree and build the
+ * cpu logical map array containing MPIDR values related to logical
+ * cpus. Assumes that cpu_logical_map(0) has already been initialized.
+ */
+static void __init of_parse_and_init_cpus(void)
+{
+	struct device_node *dn;
+
+	for_each_of_cpu_node(dn) {
+		u64 hwid = of_get_cpu_hwid(dn, 0);
+
+		if (hwid & ~MPIDR_HWID_BITMASK)
+			goto next;
+
+		if (is_mpidr_duplicate(cpu_count, hwid)) {
+			pr_err("%pOF: duplicate cpu reg properties in the DT\n",
+				dn);
+			goto next;
+		}
+
+		/*
+		 * The numbering scheme requires that the boot CPU
+		 * must be assigned logical id 0. Record it so that
+		 * the logical map built from DT is validated and can
+		 * be used.
+		 */
+		if (hwid == cpu_logical_map(0)) {
+			if (bootcpu_valid) {
+				pr_err("%pOF: duplicate boot cpu reg property in DT\n",
+					dn);
+				goto next;
+			}
+
+			bootcpu_valid = true;
+			early_map_cpu_to_node(0, of_node_to_nid(dn));
+
+			/*
+			 * cpu_logical_map has already been
+			 * initialized and the boot cpu doesn't need
+			 * the enable-method so continue without
+			 * incrementing cpu.
+			 */
+			continue;
+		}
+
+		if (cpu_count >= NR_CPUS)
+			goto next;
+
+		pr_debug("cpu logical map 0x%llx\n", hwid);
+		set_cpu_logical_map(cpu_count, hwid);
+
+		early_map_cpu_to_node(cpu_count, of_node_to_nid(dn));
+next:
+		cpu_count++;
+	}
+}
+
+/*
+ * Enumerate the possible CPU set from the device tree or ACPI and build the
+ * cpu logical map array containing MPIDR values related to logical
+ * cpus. Assumes that cpu_logical_map(0) has already been initialized.
+ */
+void __init smp_init_cpus(void)
+{
+	int i;
+
+	if (acpi_disabled)
+		of_parse_and_init_cpus();
+	else
+		acpi_parse_and_init_cpus();
+
+	if (cpu_count > nr_cpu_ids)
+		pr_warn("Number of cores (%d) exceeds configured maximum of %u - clipping\n",
+			cpu_count, nr_cpu_ids);
+
+	if (!bootcpu_valid) {
+		pr_err("missing boot CPU MPIDR, not enabling secondaries\n");
+		return;
+	}
+
+	/*
+	 * We need to set the cpu_logical_map entries before enabling
+	 * the cpus so that cpu processor description entries (DT cpu nodes
+	 * and ACPI MADT entries) can be retrieved by matching the cpu hwid
+	 * with entries in cpu_logical_map while initializing the cpus.
+	 * If the cpu set-up fails, invalidate the cpu_logical_map entry.
+	 */
+	for (i = 1; i < nr_cpu_ids; i++) {
+		if (cpu_logical_map(i) != INVALID_HWID) {
+			if (smp_cpu_setup(i))
+				set_cpu_logical_map(i, INVALID_HWID);
+		}
+	}
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	const struct cpu_operations *ops;
+	int err;
+	unsigned int cpu;
+	unsigned int this_cpu;
+
+	init_cpu_topology();
+
+	this_cpu = smp_processor_id();
+	store_cpu_topology(this_cpu);
+	numa_store_cpu_info(this_cpu);
+	numa_add_cpu(this_cpu);
+
+	/*
+	 * If UP is mandated by "nosmp" (which implies "maxcpus=0"), don't set
+	 * secondary CPUs present.
+	 */
+	if (max_cpus == 0)
+		return;
+
+	/*
+	 * Initialise the present map (which describes the set of CPUs
+	 * actually populated at the present time) and release the
+	 * secondaries from the bootloader.
+	 */
+	for_each_possible_cpu(cpu) {
+
+		per_cpu(cpu_number, cpu) = cpu;
+
+		if (cpu == smp_processor_id())
+			continue;
+
+		ops = get_cpu_ops(cpu);
+		if (!ops)
+			continue;
+
+		err = ops->cpu_prepare(cpu);
+		if (err)
+			continue;
+
+		set_cpu_present(cpu, true);
+		numa_store_cpu_info(cpu);
+	}
+}
+
+static const char *ipi_types[NR_IPI] __tracepoint_string = {
+	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
+	[IPI_CALL_FUNC]		= "Function call interrupts",
+	[IPI_CPU_STOP]		= "CPU stop interrupts",
+	[IPI_CPU_CRASH_STOP]	= "CPU stop (for crash dump) interrupts",
+	[IPI_TIMER]		= "Timer broadcast interrupts",
+	[IPI_IRQ_WORK]		= "IRQ work interrupts",
+	[IPI_WAKEUP]		= "CPU wake-up interrupts",
+};
+
+static void smp_cross_call(const struct cpumask *target, unsigned int ipinr);
+
+unsigned long irq_err_count;
+
+int arch_show_interrupts(struct seq_file *p, int prec)
+{
+	unsigned int cpu, i;
+
+	for (i = 0; i < NR_IPI; i++) {
+		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
+			   prec >= 4 ? " " : "");
+		for_each_online_cpu(cpu)
+			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
+		seq_printf(p, "      %s\n", ipi_types[i]);
+	}
+
+	seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
+	return 0;
+}
+
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	smp_cross_call(mask, IPI_CALL_FUNC);
+}
+
+void arch_send_call_function_single_ipi(int cpu)
+{
+	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
+}
+
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
+{
+	smp_cross_call(mask, IPI_WAKEUP);
+}
+#endif
+
+#ifdef CONFIG_IRQ_WORK
+void arch_irq_work_raise(void)
+{
+	smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK);
+}
+#endif
+
+static void __noreturn local_cpu_stop(void)
+{
+	set_cpu_online(smp_processor_id(), false);
+
+	local_daif_mask();
+	sdei_mask_local_cpu();
+	cpu_park_loop();
+}
+
+/*
+ * We need to implement panic_smp_self_stop() for parallel panic() calls, so
+ * that cpu_online_mask gets correctly updated and smp_send_stop() can skip
+ * CPUs that have already stopped themselves.
+ */
+void __noreturn panic_smp_self_stop(void)
+{
+	local_cpu_stop();
+}
+
+#ifdef CONFIG_KEXEC_CORE
+static atomic_t waiting_for_crash_ipi = ATOMIC_INIT(0);
+#endif
+
+static void __noreturn ipi_cpu_crash_stop(unsigned int cpu, struct pt_regs *regs)
+{
+#ifdef CONFIG_KEXEC_CORE
+	crash_save_cpu(regs, cpu);
+
+	atomic_dec(&waiting_for_crash_ipi);
+
+	local_irq_disable();
+	sdei_mask_local_cpu();
+
+	if (IS_ENABLED(CONFIG_HOTPLUG_CPU))
+		__cpu_try_die(cpu);
+
+	/* just in case */
+	cpu_park_loop();
+#else
+	BUG();
+#endif
+}
+
+/*
+ * Main handler for inter-processor interrupts
+ */
+static void do_handle_IPI(int ipinr)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if ((unsigned)ipinr < NR_IPI)
+		trace_ipi_entry(ipi_types[ipinr]);
+
+	switch (ipinr) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
+
+	case IPI_CPU_STOP:
+		local_cpu_stop();
+		break;
+
+	case IPI_CPU_CRASH_STOP:
+		if (IS_ENABLED(CONFIG_KEXEC_CORE)) {
+			ipi_cpu_crash_stop(cpu, get_irq_regs());
+
+			unreachable();
+		}
+		break;
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	case IPI_TIMER:
+		tick_receive_broadcast();
+		break;
+#endif
+
+#ifdef CONFIG_IRQ_WORK
+	case IPI_IRQ_WORK:
+		irq_work_run();
+		break;
+#endif
+
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+	case IPI_WAKEUP:
+		WARN_ONCE(!acpi_parking_protocol_valid(cpu),
+			  "CPU%u: Wake-up IPI outside the ACPI parking protocol\n",
+			  cpu);
+		break;
+#endif
+
+	default:
+		pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr);
+		break;
+	}
+
+	if ((unsigned)ipinr < NR_IPI)
+		trace_ipi_exit(ipi_types[ipinr]);
+}
+
+static irqreturn_t ipi_handler(int irq, void *data)
+{
+	do_handle_IPI(irq - ipi_irq_base);
+	return IRQ_HANDLED;
+}
+
+static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
+{
+	trace_ipi_raise(target, ipi_types[ipinr]);
+	__ipi_send_mask(ipi_desc[ipinr], target);
+}
+
+static void ipi_setup(int cpu)
+{
+	int i;
+
+	if (WARN_ON_ONCE(!ipi_irq_base))
+		return;
+
+	for (i = 0; i < nr_ipi; i++)
+		enable_percpu_irq(ipi_irq_base + i, 0);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void ipi_teardown(int cpu)
+{
+	int i;
+
+	if (WARN_ON_ONCE(!ipi_irq_base))
+		return;
+
+	for (i = 0; i < nr_ipi; i++)
+		disable_percpu_irq(ipi_irq_base + i);
+}
+#endif
+
+void __init set_smp_ipi_range(int ipi_base, int n)
+{
+	int i;
+
+	WARN_ON(n < NR_IPI);
+	nr_ipi = min(n, NR_IPI);
+
+	for (i = 0; i < nr_ipi; i++) {
+		int err;
+
+		err = request_percpu_irq(ipi_base + i, ipi_handler,
+					 "IPI", &cpu_number);
+		WARN_ON(err);
+
+		ipi_desc[i] = irq_to_desc(ipi_base + i);
+		irq_set_status_flags(ipi_base + i, IRQ_HIDDEN);
+	}
+
+	ipi_irq_base = ipi_base;
+
+	/* Setup the boot CPU immediately */
+	ipi_setup(smp_processor_id());
+}
+
+void arch_smp_send_reschedule(int cpu)
+{
+	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
+}
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+void tick_broadcast(const struct cpumask *mask)
+{
+	smp_cross_call(mask, IPI_TIMER);
+}
+#endif
+
+/*
+ * The number of CPUs online, not counting this CPU (which may not be
+ * fully online and so not counted in num_online_cpus()).
+ */
+static inline unsigned int num_other_online_cpus(void)
+{
+	unsigned int this_cpu_online = cpu_online(smp_processor_id());
+
+	return num_online_cpus() - this_cpu_online;
+}
+
+void smp_send_stop(void)
+{
+	unsigned long timeout;
+
+	if (num_other_online_cpus()) {
+		cpumask_t mask;
+
+		cpumask_copy(&mask, cpu_online_mask);
+		cpumask_clear_cpu(smp_processor_id(), &mask);
+
+		if (system_state <= SYSTEM_RUNNING)
+			pr_crit("SMP: stopping secondary CPUs\n");
+		smp_cross_call(&mask, IPI_CPU_STOP);
+	}
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while (num_other_online_cpus() && timeout--)
+		udelay(1);
+
+	if (num_other_online_cpus())
+		pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",
+			cpumask_pr_args(cpu_online_mask));
+
+	sdei_mask_local_cpu();
+}
+
+#ifdef CONFIG_KEXEC_CORE
+void crash_smp_send_stop(void)
+{
+	static int cpus_stopped;
+	cpumask_t mask;
+	unsigned long timeout;
+
+	/*
+	 * This function can be called twice in panic path, but obviously
+	 * we execute this only once.
+	 */
+	if (cpus_stopped)
+		return;
+
+	cpus_stopped = 1;
+
+	/*
+	 * If this cpu is the only one alive at this point in time, online or
+	 * not, there are no stop messages to be sent around, so just back out.
+	 */
+	if (num_other_online_cpus() == 0)
+		goto skip_ipi;
+
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+
+	atomic_set(&waiting_for_crash_ipi, num_other_online_cpus());
+
+	pr_crit("SMP: stopping secondary CPUs\n");
+	smp_cross_call(&mask, IPI_CPU_CRASH_STOP);
+
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && timeout--)
+		udelay(1);
+
+	if (atomic_read(&waiting_for_crash_ipi) > 0)
+		pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",
+			cpumask_pr_args(&mask));
+
+skip_ipi:
+	sdei_mask_local_cpu();
+	sdei_handler_abort();
+}
+
+bool smp_crash_stop_failed(void)
+{
+	return (atomic_read(&waiting_for_crash_ipi) > 0);
+}
+#endif
+
+static bool have_cpu_die(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+	int any_cpu = raw_smp_processor_id();
+	const struct cpu_operations *ops = get_cpu_ops(any_cpu);
+
+	if (ops && ops->cpu_die)
+		return true;
+#endif
+	return false;
+}
+
+bool cpus_are_stuck_in_kernel(void)
+{
+	bool smp_spin_tables = (num_possible_cpus() > 1 && !have_cpu_die());
+
+	return !!cpus_stuck_in_kernel || smp_spin_tables ||
+		is_protected_kvm_enabled();
+}
diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c
new file mode 100644
index 000000000..49029eace
--- /dev/null
+++ b/arch/arm64/kernel/smp_spin_table.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Spin Table SMP initialisation
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpu_ops.h>
+#include <asm/cputype.h>
+#include <asm/io.h>
+#include <asm/smp_plat.h>
+
+extern void secondary_holding_pen(void);
+volatile unsigned long __section(".mmuoff.data.read")
+secondary_holding_pen_release = INVALID_HWID;
+
+static phys_addr_t cpu_release_addr[NR_CPUS];
+
+/*
+ * Write secondary_holding_pen_release in a way that is guaranteed to be
+ * visible to all observers, irrespective of whether they're taking part
+ * in coherency or not.  This is necessary for the hotplug code to work
+ * reliably.
+ */
+static void write_pen_release(u64 val)
+{
+	void *start = (void *)&secondary_holding_pen_release;
+	unsigned long size = sizeof(secondary_holding_pen_release);
+
+	secondary_holding_pen_release = val;
+	dcache_clean_inval_poc((unsigned long)start, (unsigned long)start + size);
+}
+
+
+static int smp_spin_table_cpu_init(unsigned int cpu)
+{
+	struct device_node *dn;
+	int ret;
+
+	dn = of_get_cpu_node(cpu, NULL);
+	if (!dn)
+		return -ENODEV;
+
+	/*
+	 * Determine the address from which the CPU is polling.
+	 */
+	ret = of_property_read_u64(dn, "cpu-release-addr",
+				   &cpu_release_addr[cpu]);
+	if (ret)
+		pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
+		       cpu);
+
+	of_node_put(dn);
+
+	return ret;
+}
+
+static int smp_spin_table_cpu_prepare(unsigned int cpu)
+{
+	__le64 __iomem *release_addr;
+	phys_addr_t pa_holding_pen = __pa_symbol(secondary_holding_pen);
+
+	if (!cpu_release_addr[cpu])
+		return -ENODEV;
+
+	/*
+	 * The cpu-release-addr may or may not be inside the linear mapping.
+	 * As ioremap_cache will either give us a new mapping or reuse the
+	 * existing linear mapping, we can use it to cover both cases. In
+	 * either case the memory will be MT_NORMAL.
+	 */
+	release_addr = ioremap_cache(cpu_release_addr[cpu],
+				     sizeof(*release_addr));
+	if (!release_addr)
+		return -ENOMEM;
+
+	/*
+	 * We write the release address as LE regardless of the native
+	 * endianness of the kernel. Therefore, any boot-loaders that
+	 * read this address need to convert this address to the
+	 * boot-loader's endianness before jumping. This is mandated by
+	 * the boot protocol.
+	 */
+	writeq_relaxed(pa_holding_pen, release_addr);
+	dcache_clean_inval_poc((__force unsigned long)release_addr,
+			    (__force unsigned long)release_addr +
+				    sizeof(*release_addr));
+
+	/*
+	 * Send an event to wake up the secondary CPU.
+	 */
+	sev();
+
+	iounmap(release_addr);
+
+	return 0;
+}
+
+static int smp_spin_table_cpu_boot(unsigned int cpu)
+{
+	/*
+	 * Update the pen release flag.
+	 */
+	write_pen_release(cpu_logical_map(cpu));
+
+	/*
+	 * Send an event, causing the secondaries to read pen_release.
+	 */
+	sev();
+
+	return 0;
+}
+
+const struct cpu_operations smp_spin_table_ops = {
+	.name		= "spin-table",
+	.cpu_init	= smp_spin_table_cpu_init,
+	.cpu_prepare	= smp_spin_table_cpu_prepare,
+	.cpu_boot	= smp_spin_table_cpu_boot,
+};
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
new file mode 100644
index 000000000..17f66a74c
--- /dev/null
+++ b/arch/arm64/kernel/stacktrace.c
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Stack tracing support
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#include <linux/kernel.h>
+#include <linux/efi.h>
+#include <linux/export.h>
+#include <linux/ftrace.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/stacktrace.h>
+
+#include <asm/efi.h>
+#include <asm/irq.h>
+#include <asm/stack_pointer.h>
+#include <asm/stacktrace.h>
+
+/*
+ * Start an unwind from a pt_regs.
+ *
+ * The unwind will begin at the PC within the regs.
+ *
+ * The regs must be on a stack currently owned by the calling task.
+ */
+static __always_inline void
+unwind_init_from_regs(struct unwind_state *state,
+		      struct pt_regs *regs)
+{
+	unwind_init_common(state, current);
+
+	state->fp = regs->regs[29];
+	state->pc = regs->pc;
+}
+
+/*
+ * Start an unwind from a caller.
+ *
+ * The unwind will begin at the caller of whichever function this is inlined
+ * into.
+ *
+ * The function which invokes this must be noinline.
+ */
+static __always_inline void
+unwind_init_from_caller(struct unwind_state *state)
+{
+	unwind_init_common(state, current);
+
+	state->fp = (unsigned long)__builtin_frame_address(1);
+	state->pc = (unsigned long)__builtin_return_address(0);
+}
+
+/*
+ * Start an unwind from a blocked task.
+ *
+ * The unwind will begin at the blocked tasks saved PC (i.e. the caller of
+ * cpu_switch_to()).
+ *
+ * The caller should ensure the task is blocked in cpu_switch_to() for the
+ * duration of the unwind, or the unwind will be bogus. It is never valid to
+ * call this for the current task.
+ */
+static __always_inline void
+unwind_init_from_task(struct unwind_state *state,
+		      struct task_struct *task)
+{
+	unwind_init_common(state, task);
+
+	state->fp = thread_saved_fp(task);
+	state->pc = thread_saved_pc(task);
+}
+
+static __always_inline int
+unwind_recover_return_address(struct unwind_state *state)
+{
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	if (state->task->ret_stack &&
+	    (state->pc == (unsigned long)return_to_handler)) {
+		unsigned long orig_pc;
+		orig_pc = ftrace_graph_ret_addr(state->task, NULL, state->pc,
+						(void *)state->fp);
+		if (WARN_ON_ONCE(state->pc == orig_pc))
+			return -EINVAL;
+		state->pc = orig_pc;
+	}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+#ifdef CONFIG_KRETPROBES
+	if (is_kretprobe_trampoline(state->pc)) {
+		state->pc = kretprobe_find_ret_addr(state->task,
+						    (void *)state->fp,
+						    &state->kr_cur);
+	}
+#endif /* CONFIG_KRETPROBES */
+
+	return 0;
+}
+
+/*
+ * Unwind from one frame record (A) to the next frame record (B).
+ *
+ * We terminate early if the location of B indicates a malformed chain of frame
+ * records (e.g. a cycle), determined based on the location and fp value of A
+ * and the location (but not the fp value) of B.
+ */
+static __always_inline int
+unwind_next(struct unwind_state *state)
+{
+	struct task_struct *tsk = state->task;
+	unsigned long fp = state->fp;
+	int err;
+
+	/* Final frame; nothing to unwind */
+	if (fp == (unsigned long)task_pt_regs(tsk)->stackframe)
+		return -ENOENT;
+
+	err = unwind_next_frame_record(state);
+	if (err)
+		return err;
+
+	state->pc = ptrauth_strip_kernel_insn_pac(state->pc);
+
+	return unwind_recover_return_address(state);
+}
+
+static __always_inline void
+unwind(struct unwind_state *state, stack_trace_consume_fn consume_entry,
+       void *cookie)
+{
+	if (unwind_recover_return_address(state))
+		return;
+
+	while (1) {
+		int ret;
+
+		if (!consume_entry(cookie, state->pc))
+			break;
+		ret = unwind_next(state);
+		if (ret < 0)
+			break;
+	}
+}
+
+/*
+ * Per-cpu stacks are only accessible when unwinding the current task in a
+ * non-preemptible context.
+ */
+#define STACKINFO_CPU(name)					\
+	({							\
+		((task == current) && !preemptible())		\
+			? stackinfo_get_##name()		\
+			: stackinfo_get_unknown();		\
+	})
+
+/*
+ * SDEI stacks are only accessible when unwinding the current task in an NMI
+ * context.
+ */
+#define STACKINFO_SDEI(name)					\
+	({							\
+		((task == current) && in_nmi())			\
+			? stackinfo_get_sdei_##name()		\
+			: stackinfo_get_unknown();		\
+	})
+
+#define STACKINFO_EFI						\
+	({							\
+		((task == current) && current_in_efi())		\
+			? stackinfo_get_efi()			\
+			: stackinfo_get_unknown();		\
+	})
+
+noinline noinstr void arch_stack_walk(stack_trace_consume_fn consume_entry,
+			      void *cookie, struct task_struct *task,
+			      struct pt_regs *regs)
+{
+	struct stack_info stacks[] = {
+		stackinfo_get_task(task),
+		STACKINFO_CPU(irq),
+#if defined(CONFIG_VMAP_STACK)
+		STACKINFO_CPU(overflow),
+#endif
+#if defined(CONFIG_VMAP_STACK) && defined(CONFIG_ARM_SDE_INTERFACE)
+		STACKINFO_SDEI(normal),
+		STACKINFO_SDEI(critical),
+#endif
+#ifdef CONFIG_EFI
+		STACKINFO_EFI,
+#endif
+	};
+	struct unwind_state state = {
+		.stacks = stacks,
+		.nr_stacks = ARRAY_SIZE(stacks),
+	};
+
+	if (regs) {
+		if (task != current)
+			return;
+		unwind_init_from_regs(&state, regs);
+	} else if (task == current) {
+		unwind_init_from_caller(&state);
+	} else {
+		unwind_init_from_task(&state, task);
+	}
+
+	unwind(&state, consume_entry, cookie);
+}
+
+static bool dump_backtrace_entry(void *arg, unsigned long where)
+{
+	char *loglvl = arg;
+	printk("%s %pSb\n", loglvl, (void *)where);
+	return true;
+}
+
+void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
+		    const char *loglvl)
+{
+	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
+
+	if (regs && user_mode(regs))
+		return;
+
+	if (!tsk)
+		tsk = current;
+
+	if (!try_get_task_stack(tsk))
+		return;
+
+	printk("%sCall trace:\n", loglvl);
+	arch_stack_walk(dump_backtrace_entry, (void *)loglvl, tsk, regs);
+
+	put_task_stack(tsk);
+}
+
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
+{
+	dump_backtrace(NULL, tsk, loglvl);
+	barrier();
+}
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
new file mode 100644
index 000000000..0fbdf5fe6
--- /dev/null
+++ b/arch/arm64/kernel/suspend.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/ftrace.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/pgtable.h>
+#include <linux/cpuidle.h>
+#include <asm/alternative.h>
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/cpuidle.h>
+#include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
+#include <asm/exec.h>
+#include <asm/mte.h>
+#include <asm/memory.h>
+#include <asm/mmu_context.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+
+/*
+ * This is allocated by cpu_suspend_init(), and used to store a pointer to
+ * the 'struct sleep_stack_data' the contains a particular CPUs state.
+ */
+unsigned long *sleep_save_stash;
+
+/*
+ * This hook is provided so that cpu_suspend code can restore HW
+ * breakpoints as early as possible in the resume path, before reenabling
+ * debug exceptions. Code cannot be run from a CPU PM notifier since by the
+ * time the notifier runs debug exceptions might have been enabled already,
+ * with HW breakpoints registers content still in an unknown state.
+ */
+static int (*hw_breakpoint_restore)(unsigned int);
+void __init cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int))
+{
+	/* Prevent multiple restore hook initializations */
+	if (WARN_ON(hw_breakpoint_restore))
+		return;
+	hw_breakpoint_restore = hw_bp_restore;
+}
+
+void notrace __cpu_suspend_exit(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	mte_suspend_exit();
+
+	/*
+	 * We are resuming from reset with the idmap active in TTBR0_EL1.
+	 * We must uninstall the idmap and restore the expected MMU
+	 * state before we can possibly return to userspace.
+	 */
+	cpu_uninstall_idmap();
+
+	/* Restore CnP bit in TTBR1_EL1 */
+	if (system_supports_cnp())
+		cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
+
+	/*
+	 * PSTATE was not saved over suspend/resume, re-enable any detected
+	 * features that might not have been set correctly.
+	 */
+	if (cpus_have_const_cap(ARM64_HAS_DIT))
+		set_pstate_dit(1);
+	__uaccess_enable_hw_pan();
+
+	/*
+	 * Restore HW breakpoint registers to sane values
+	 * before debug exceptions are possibly reenabled
+	 * by cpu_suspend()s local_daif_restore() call.
+	 */
+	if (hw_breakpoint_restore)
+		hw_breakpoint_restore(cpu);
+
+	/*
+	 * On resume, firmware implementing dynamic mitigation will
+	 * have turned the mitigation on. If the user has forcefully
+	 * disabled it, make sure their wishes are obeyed.
+	 */
+	spectre_v4_enable_mitigation(NULL);
+
+	/* Restore additional feature-specific configuration */
+	ptrauth_suspend_exit();
+}
+
+/*
+ * cpu_suspend
+ *
+ * arg: argument to pass to the finisher function
+ * fn: finisher function pointer
+ *
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+	int ret = 0;
+	unsigned long flags;
+	struct sleep_stack_data state;
+	struct arm_cpuidle_irq_context context;
+
+	/* Report any MTE async fault before going to suspend */
+	mte_suspend_enter();
+
+	/*
+	 * From this point debug exceptions are disabled to prevent
+	 * updates to mdscr register (saved and restored along with
+	 * general purpose registers) from kernel debuggers.
+	 *
+	 * Strictly speaking the trace_hardirqs_off() here is superfluous,
+	 * hardirqs should be firmly off by now. This really ought to use
+	 * something like raw_local_daif_save().
+	 */
+	flags = local_daif_save();
+
+	/*
+	 * Function graph tracer state gets inconsistent when the kernel
+	 * calls functions that never return (aka suspend finishers) hence
+	 * disable graph tracing during their execution.
+	 */
+	pause_graph_tracing();
+
+	/*
+	 * Switch to using DAIF.IF instead of PMR in order to reliably
+	 * resume if we're using pseudo-NMIs.
+	 */
+	arm_cpuidle_save_irq_context(&context);
+
+	ct_cpuidle_enter();
+
+	if (__cpu_suspend_enter(&state)) {
+		/* Call the suspend finisher */
+		ret = fn(arg);
+
+		/*
+		 * Never gets here, unless the suspend finisher fails.
+		 * Successful cpu_suspend() should return from cpu_resume(),
+		 * returning through this code path is considered an error
+		 * If the return value is set to 0 force ret = -EOPNOTSUPP
+		 * to make sure a proper error condition is propagated
+		 */
+		if (!ret)
+			ret = -EOPNOTSUPP;
+
+		ct_cpuidle_exit();
+	} else {
+		ct_cpuidle_exit();
+		__cpu_suspend_exit();
+	}
+
+	arm_cpuidle_restore_irq_context(&context);
+
+	unpause_graph_tracing();
+
+	/*
+	 * Restore pstate flags. OS lock and mdscr have been already
+	 * restored, so from this point onwards, debugging is fully
+	 * reenabled if it was enabled when core started shutdown.
+	 */
+	local_daif_restore(flags);
+
+	return ret;
+}
+
+static int __init cpu_suspend_init(void)
+{
+	/* ctx_ptr is an array of physical addresses */
+	sleep_save_stash = kcalloc(mpidr_hash_size(), sizeof(*sleep_save_stash),
+				   GFP_KERNEL);
+
+	if (WARN_ON(!sleep_save_stash))
+		return -ENOMEM;
+
+	return 0;
+}
+early_initcall(cpu_suspend_init);
diff --git a/arch/arm64/kernel/sys.c b/arch/arm64/kernel/sys.c
new file mode 100644
index 000000000..d5ffaaab3
--- /dev/null
+++ b/arch/arm64/kernel/sys.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AArch64-specific system calls implementation
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+
+#include <asm/cpufeature.h>
+#include <asm/syscall.h>
+
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags,
+		unsigned long, fd, unsigned long, off)
+{
+	if (offset_in_page(off) != 0)
+		return -EINVAL;
+
+	return ksys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT);
+}
+
+SYSCALL_DEFINE1(arm64_personality, unsigned int, personality)
+{
+	if (personality(personality) == PER_LINUX32 &&
+		!system_supports_32bit_el0())
+		return -EINVAL;
+	return ksys_personality(personality);
+}
+
+asmlinkage long sys_ni_syscall(void);
+
+asmlinkage long __arm64_sys_ni_syscall(const struct pt_regs *__unused)
+{
+	return sys_ni_syscall();
+}
+
+/*
+ * Wrappers to pass the pt_regs argument.
+ */
+#define __arm64_sys_personality		__arm64_sys_arm64_personality
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym)	asmlinkage long __arm64_##sym(const struct pt_regs *);
+#include <asm/unistd.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym)	[nr] = __arm64_##sym,
+
+const syscall_fn_t sys_call_table[__NR_syscalls] = {
+	[0 ... __NR_syscalls - 1] = __arm64_sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/arm64/kernel/sys32.c b/arch/arm64/kernel/sys32.c
new file mode 100644
index 000000000..fc40386af
--- /dev/null
+++ b/arch/arm64/kernel/sys32.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/kernel/sys32.c
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ */
+
+/*
+ * Needed to avoid conflicting __NR_* macros between uapi/asm/unistd.h and
+ * asm/unistd32.h.
+ */
+#define __COMPAT_SYSCALL_NR
+
+#include <linux/compat.h>
+#include <linux/compiler.h>
+#include <linux/syscalls.h>
+
+#include <asm/syscall.h>
+
+asmlinkage long compat_sys_sigreturn(void);
+asmlinkage long compat_sys_rt_sigreturn(void);
+
+COMPAT_SYSCALL_DEFINE3(aarch32_statfs64, const char __user *, pathname,
+		       compat_size_t, sz, struct compat_statfs64 __user *, buf)
+{
+	/*
+	 * 32-bit ARM applies an OABI compatibility fixup to statfs64 and
+	 * fstatfs64 regardless of whether OABI is in use, and therefore
+	 * arbitrary binaries may rely upon it, so we must do the same.
+	 * For more details, see commit:
+	 *
+	 * 713c481519f19df9 ("[ARM] 3108/2: old ABI compat: statfs64 and
+	 * fstatfs64")
+	 */
+	if (sz == 88)
+		sz = 84;
+
+	return kcompat_sys_statfs64(pathname, sz, buf);
+}
+
+COMPAT_SYSCALL_DEFINE3(aarch32_fstatfs64, unsigned int, fd, compat_size_t, sz,
+		       struct compat_statfs64 __user *, buf)
+{
+	/* see aarch32_statfs64 */
+	if (sz == 88)
+		sz = 84;
+
+	return kcompat_sys_fstatfs64(fd, sz, buf);
+}
+
+/*
+ * Note: off_4k is always in units of 4K. If we can't do the
+ * requested offset because it is not page-aligned, we return -EINVAL.
+ */
+COMPAT_SYSCALL_DEFINE6(aarch32_mmap2, unsigned long, addr, unsigned long, len,
+		       unsigned long, prot, unsigned long, flags,
+		       unsigned long, fd, unsigned long, off_4k)
+{
+	if (off_4k & (~PAGE_MASK >> 12))
+		return -EINVAL;
+
+	off_4k >>= (PAGE_SHIFT - 12);
+
+	return ksys_mmap_pgoff(addr, len, prot, flags, fd, off_4k);
+}
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define arg_u32p(name)	u32, name##_hi, u32, name##_lo
+#else
+#define arg_u32p(name)	u32, name##_lo, u32, name##_hi
+#endif
+
+#define arg_u64(name)	(((u64)name##_hi << 32) | name##_lo)
+
+COMPAT_SYSCALL_DEFINE6(aarch32_pread64, unsigned int, fd, char __user *, buf,
+		       size_t, count, u32, __pad, arg_u32p(pos))
+{
+	return ksys_pread64(fd, buf, count, arg_u64(pos));
+}
+
+COMPAT_SYSCALL_DEFINE6(aarch32_pwrite64, unsigned int, fd,
+		       const char __user *, buf, size_t, count, u32, __pad,
+		       arg_u32p(pos))
+{
+	return ksys_pwrite64(fd, buf, count, arg_u64(pos));
+}
+
+COMPAT_SYSCALL_DEFINE4(aarch32_truncate64, const char __user *, pathname,
+		       u32, __pad, arg_u32p(length))
+{
+	return ksys_truncate(pathname, arg_u64(length));
+}
+
+COMPAT_SYSCALL_DEFINE4(aarch32_ftruncate64, unsigned int, fd, u32, __pad,
+		       arg_u32p(length))
+{
+	return ksys_ftruncate(fd, arg_u64(length));
+}
+
+COMPAT_SYSCALL_DEFINE5(aarch32_readahead, int, fd, u32, __pad,
+		       arg_u32p(offset), size_t, count)
+{
+	return ksys_readahead(fd, arg_u64(offset), count);
+}
+
+COMPAT_SYSCALL_DEFINE6(aarch32_fadvise64_64, int, fd, int, advice,
+		       arg_u32p(offset), arg_u32p(len))
+{
+	return ksys_fadvise64_64(fd, arg_u64(offset), arg_u64(len), advice);
+}
+
+COMPAT_SYSCALL_DEFINE6(aarch32_sync_file_range2, int, fd, unsigned int, flags,
+		       arg_u32p(offset), arg_u32p(nbytes))
+{
+	return ksys_sync_file_range(fd, arg_u64(offset), arg_u64(nbytes),
+				    flags);
+}
+
+COMPAT_SYSCALL_DEFINE6(aarch32_fallocate, int, fd, int, mode,
+		       arg_u32p(offset), arg_u32p(len))
+{
+	return ksys_fallocate(fd, mode, arg_u64(offset), arg_u64(len));
+}
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym)	asmlinkage long __arm64_##sym(const struct pt_regs *);
+#include <asm/unistd32.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, sym)	[nr] = __arm64_##sym,
+
+const syscall_fn_t compat_sys_call_table[__NR_compat_syscalls] = {
+	[0 ... __NR_compat_syscalls - 1] = __arm64_sys_ni_syscall,
+#include <asm/unistd32.h>
+};
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
new file mode 100644
index 000000000..df14336c3
--- /dev/null
+++ b/arch/arm64/kernel/sys_compat.c
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/sys_arm.c
+ *
+ * Copyright (C) People who wrote linux/arch/i386/kernel/sys_i386.c
+ * Copyright (C) 1995, 1996 Russell King.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/compat.h>
+#include <linux/cpufeature.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/system_misc.h>
+#include <asm/tlbflush.h>
+#include <asm/unistd.h>
+
+static long
+__do_compat_cache_op(unsigned long start, unsigned long end)
+{
+	long ret;
+
+	do {
+		unsigned long chunk = min(PAGE_SIZE, end - start);
+
+		if (fatal_signal_pending(current))
+			return 0;
+
+		if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+			/*
+			 * The workaround requires an inner-shareable tlbi.
+			 * We pick the reserved-ASID to minimise the impact.
+			 */
+			__tlbi(aside1is, __TLBI_VADDR(0, 0));
+			dsb(ish);
+		}
+
+		ret = caches_clean_inval_user_pou(start, start + chunk);
+		if (ret)
+			return ret;
+
+		cond_resched();
+		start += chunk;
+	} while (start < end);
+
+	return 0;
+}
+
+static inline long
+do_compat_cache_op(unsigned long start, unsigned long end, int flags)
+{
+	if (end < start || flags)
+		return -EINVAL;
+
+	if (!access_ok((const void __user *)start, end - start))
+		return -EFAULT;
+
+	return __do_compat_cache_op(start, end);
+}
+/*
+ * Handle all unrecognised system calls.
+ */
+long compat_arm_syscall(struct pt_regs *regs, int scno)
+{
+	unsigned long addr;
+
+	switch (scno) {
+	/*
+	 * Flush a region from virtual address 'r0' to virtual address 'r1'
+	 * _exclusive_.  There is no alignment requirement on either address;
+	 * user space does not need to know the hardware cache layout.
+	 *
+	 * r2 contains flags.  It should ALWAYS be passed as ZERO until it
+	 * is defined to be something else.  For now we ignore it, but may
+	 * the fires of hell burn in your belly if you break this rule. ;)
+	 *
+	 * (at a later date, we may want to allow this call to not flush
+	 * various aspects of the cache.  Passing '0' will guarantee that
+	 * everything necessary gets flushed to maintain consistency in
+	 * the specified region).
+	 */
+	case __ARM_NR_compat_cacheflush:
+		return do_compat_cache_op(regs->regs[0], regs->regs[1], regs->regs[2]);
+
+	case __ARM_NR_compat_set_tls:
+		current->thread.uw.tp_value = regs->regs[0];
+
+		/*
+		 * Protect against register corruption from context switch.
+		 * See comment in tls_thread_flush.
+		 */
+		barrier();
+		write_sysreg(regs->regs[0], tpidrro_el0);
+		return 0;
+
+	default:
+		/*
+		 * Calls 0xf0xxx..0xf07ff are defined to return -ENOSYS
+		 * if not implemented, rather than raising SIGILL. This
+		 * way the calling program can gracefully determine whether
+		 * a feature is supported.
+		 */
+		if (scno < __ARM_NR_COMPAT_END)
+			return -ENOSYS;
+		break;
+	}
+
+	addr = instruction_pointer(regs) - (compat_thumb_mode(regs) ? 2 : 4);
+
+	arm64_notify_die("Oops - bad compat syscall(2)", regs,
+			 SIGILL, ILL_ILLTRP, addr, 0);
+	return 0;
+}
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
new file mode 100644
index 000000000..9a70d9746
--- /dev/null
+++ b/arch/arm64/kernel/syscall.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/compiler.h>
+#include <linux/context_tracking.h>
+#include <linux/errno.h>
+#include <linux/nospec.h>
+#include <linux/ptrace.h>
+#include <linux/randomize_kstack.h>
+#include <linux/syscalls.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/exception.h>
+#include <asm/fpsimd.h>
+#include <asm/syscall.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+
+long compat_arm_syscall(struct pt_regs *regs, int scno);
+long sys_ni_syscall(void);
+
+static long do_ni_syscall(struct pt_regs *regs, int scno)
+{
+#ifdef CONFIG_COMPAT
+	long ret;
+	if (is_compat_task()) {
+		ret = compat_arm_syscall(regs, scno);
+		if (ret != -ENOSYS)
+			return ret;
+	}
+#endif
+
+	return sys_ni_syscall();
+}
+
+static long __invoke_syscall(struct pt_regs *regs, syscall_fn_t syscall_fn)
+{
+	return syscall_fn(regs);
+}
+
+static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
+			   unsigned int sc_nr,
+			   const syscall_fn_t syscall_table[])
+{
+	long ret;
+
+	add_random_kstack_offset();
+
+	if (scno < sc_nr) {
+		syscall_fn_t syscall_fn;
+		syscall_fn = syscall_table[array_index_nospec(scno, sc_nr)];
+		ret = __invoke_syscall(regs, syscall_fn);
+	} else {
+		ret = do_ni_syscall(regs, scno);
+	}
+
+	syscall_set_return_value(current, regs, 0, ret);
+
+	/*
+	 * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(),
+	 * but not enough for arm64 stack utilization comfort. To keep
+	 * reasonable stack head room, reduce the maximum offset to 9 bits.
+	 *
+	 * The actual entropy will be further reduced by the compiler when
+	 * applying stack alignment constraints: the AAPCS mandates a
+	 * 16-byte (i.e. 4-bit) aligned SP at function boundaries.
+	 *
+	 * The resulting 5 bits of entropy is seen in SP[8:4].
+	 */
+	choose_random_kstack_offset(get_random_u16() & 0x1FF);
+}
+
+static inline bool has_syscall_work(unsigned long flags)
+{
+	return unlikely(flags & _TIF_SYSCALL_WORK);
+}
+
+static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
+			   const syscall_fn_t syscall_table[])
+{
+	unsigned long flags = read_thread_flags();
+
+	regs->orig_x0 = regs->regs[0];
+	regs->syscallno = scno;
+
+	/*
+	 * BTI note:
+	 * The architecture does not guarantee that SPSR.BTYPE is zero
+	 * on taking an SVC, so we could return to userspace with a
+	 * non-zero BTYPE after the syscall.
+	 *
+	 * This shouldn't matter except when userspace is explicitly
+	 * doing something stupid, such as setting PROT_BTI on a page
+	 * that lacks conforming BTI/PACIxSP instructions, falling
+	 * through from one executable page to another with differing
+	 * PROT_BTI, or messing with BTYPE via ptrace: in such cases,
+	 * userspace should not be surprised if a SIGILL occurs on
+	 * syscall return.
+	 *
+	 * So, don't touch regs->pstate & PSR_BTYPE_MASK here.
+	 * (Similarly for HVC and SMC elsewhere.)
+	 */
+
+	if (flags & _TIF_MTE_ASYNC_FAULT) {
+		/*
+		 * Process the asynchronous tag check fault before the actual
+		 * syscall. do_notify_resume() will send a signal to userspace
+		 * before the syscall is restarted.
+		 */
+		syscall_set_return_value(current, regs, -ERESTARTNOINTR, 0);
+		return;
+	}
+
+	if (has_syscall_work(flags)) {
+		/*
+		 * The de-facto standard way to skip a system call using ptrace
+		 * is to set the system call to -1 (NO_SYSCALL) and set x0 to a
+		 * suitable error code for consumption by userspace. However,
+		 * this cannot be distinguished from a user-issued syscall(-1)
+		 * and so we must set x0 to -ENOSYS here in case the tracer doesn't
+		 * issue the skip and we fall into trace_exit with x0 preserved.
+		 *
+		 * This is slightly odd because it also means that if a tracer
+		 * sets the system call number to -1 but does not initialise x0,
+		 * then x0 will be preserved for all system calls apart from a
+		 * user-issued syscall(-1). However, requesting a skip and not
+		 * setting the return value is unlikely to do anything sensible
+		 * anyway.
+		 */
+		if (scno == NO_SYSCALL)
+			syscall_set_return_value(current, regs, -ENOSYS, 0);
+		scno = syscall_trace_enter(regs);
+		if (scno == NO_SYSCALL)
+			goto trace_exit;
+	}
+
+	invoke_syscall(regs, scno, sc_nr, syscall_table);
+
+	/*
+	 * The tracing status may have changed under our feet, so we have to
+	 * check again. However, if we were tracing entry, then we always trace
+	 * exit regardless, as the old entry assembly did.
+	 */
+	if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) {
+		flags = read_thread_flags();
+		if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP))
+			return;
+	}
+
+trace_exit:
+	syscall_trace_exit(regs);
+}
+
+void do_el0_svc(struct pt_regs *regs)
+{
+	el0_svc_common(regs, regs->regs[8], __NR_syscalls, sys_call_table);
+}
+
+#ifdef CONFIG_COMPAT
+void do_el0_svc_compat(struct pt_regs *regs)
+{
+	el0_svc_common(regs, regs->regs[7], __NR_compat_syscalls,
+		       compat_sys_call_table);
+}
+#endif
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
new file mode 100644
index 000000000..b5855eb74
--- /dev/null
+++ b/arch/arm64/kernel/time.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/time.c
+ *
+ * Copyright (C) 1991, 1992, 1995  Linus Torvalds
+ * Modifications for ARM (C) 1994-2001 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/clockchips.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <linux/errno.h>
+#include <linux/profile.h>
+#include <linux/stacktrace.h>
+#include <linux/syscore_ops.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/clocksource.h>
+#include <linux/of_clk.h>
+#include <linux/acpi.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#include <asm/thread_info.h>
+#include <asm/paravirt.h>
+
+static bool profile_pc_cb(void *arg, unsigned long pc)
+{
+	unsigned long *prof_pc = arg;
+
+	if (in_lock_functions(pc))
+		return true;
+	*prof_pc = pc;
+	return false;
+}
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long prof_pc = 0;
+
+	arch_stack_walk(profile_pc_cb, &prof_pc, current, regs);
+
+	return prof_pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+void __init time_init(void)
+{
+	u32 arch_timer_rate;
+
+	of_clk_init(NULL);
+	timer_probe();
+
+	tick_setup_hrtimer_broadcast();
+
+	arch_timer_rate = arch_timer_get_rate();
+	if (!arch_timer_rate)
+		panic("Unable to initialise architected timer.\n");
+
+	/* Calibrate the delay loop directly */
+	lpj_fine = arch_timer_rate / HZ;
+
+	pv_time_init();
+}
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
new file mode 100644
index 000000000..817d788cd
--- /dev/null
+++ b/arch/arm64/kernel/topology.c
@@ -0,0 +1,348 @@
+/*
+ * arch/arm64/kernel/topology.c
+ *
+ * Copyright (C) 2011,2013,2014 Linaro Limited.
+ *
+ * Based on the arm32 version written by Vincent Guittot in turn based on
+ * arch/sh/kernel/topology.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/arch_topology.h>
+#include <linux/cacheinfo.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/topology.h>
+
+#ifdef CONFIG_ACPI
+static bool __init acpi_cpu_is_threaded(int cpu)
+{
+	int is_threaded = acpi_pptt_cpu_is_thread(cpu);
+
+	/*
+	 * if the PPTT doesn't have thread information, assume a homogeneous
+	 * machine and return the current CPU's thread state.
+	 */
+	if (is_threaded < 0)
+		is_threaded = read_cpuid_mpidr() & MPIDR_MT_BITMASK;
+
+	return !!is_threaded;
+}
+
+/*
+ * Propagate the topology information of the processor_topology_node tree to the
+ * cpu_topology array.
+ */
+int __init parse_acpi_topology(void)
+{
+	int cpu, topology_id;
+
+	if (acpi_disabled)
+		return 0;
+
+	for_each_possible_cpu(cpu) {
+		topology_id = find_acpi_cpu_topology(cpu, 0);
+		if (topology_id < 0)
+			return topology_id;
+
+		if (acpi_cpu_is_threaded(cpu)) {
+			cpu_topology[cpu].thread_id = topology_id;
+			topology_id = find_acpi_cpu_topology(cpu, 1);
+			cpu_topology[cpu].core_id   = topology_id;
+		} else {
+			cpu_topology[cpu].thread_id  = -1;
+			cpu_topology[cpu].core_id    = topology_id;
+		}
+		topology_id = find_acpi_cpu_topology_cluster(cpu);
+		cpu_topology[cpu].cluster_id = topology_id;
+		topology_id = find_acpi_cpu_topology_package(cpu);
+		cpu_topology[cpu].package_id = topology_id;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARM64_AMU_EXTN
+#define read_corecnt()	read_sysreg_s(SYS_AMEVCNTR0_CORE_EL0)
+#define read_constcnt()	read_sysreg_s(SYS_AMEVCNTR0_CONST_EL0)
+#else
+#define read_corecnt()	(0UL)
+#define read_constcnt()	(0UL)
+#endif
+
+#undef pr_fmt
+#define pr_fmt(fmt) "AMU: " fmt
+
+static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, arch_max_freq_scale);
+static DEFINE_PER_CPU(u64, arch_const_cycles_prev);
+static DEFINE_PER_CPU(u64, arch_core_cycles_prev);
+static cpumask_var_t amu_fie_cpus;
+
+void update_freq_counters_refs(void)
+{
+	this_cpu_write(arch_core_cycles_prev, read_corecnt());
+	this_cpu_write(arch_const_cycles_prev, read_constcnt());
+}
+
+static inline bool freq_counters_valid(int cpu)
+{
+	if ((cpu >= nr_cpu_ids) || !cpumask_test_cpu(cpu, cpu_present_mask))
+		return false;
+
+	if (!cpu_has_amu_feat(cpu)) {
+		pr_debug("CPU%d: counters are not supported.\n", cpu);
+		return false;
+	}
+
+	if (unlikely(!per_cpu(arch_const_cycles_prev, cpu) ||
+		     !per_cpu(arch_core_cycles_prev, cpu))) {
+		pr_debug("CPU%d: cycle counters are not enabled.\n", cpu);
+		return false;
+	}
+
+	return true;
+}
+
+static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
+{
+	u64 ratio;
+
+	if (unlikely(!max_rate || !ref_rate)) {
+		pr_debug("CPU%d: invalid maximum or reference frequency.\n",
+			 cpu);
+		return -EINVAL;
+	}
+
+	/*
+	 * Pre-compute the fixed ratio between the frequency of the constant
+	 * reference counter and the maximum frequency of the CPU.
+	 *
+	 *			    ref_rate
+	 * arch_max_freq_scale =   ---------- * SCHED_CAPACITY_SCALE²
+	 *			    max_rate
+	 *
+	 * We use a factor of 2 * SCHED_CAPACITY_SHIFT -> SCHED_CAPACITY_SCALE²
+	 * in order to ensure a good resolution for arch_max_freq_scale for
+	 * very low reference frequencies (down to the KHz range which should
+	 * be unlikely).
+	 */
+	ratio = ref_rate << (2 * SCHED_CAPACITY_SHIFT);
+	ratio = div64_u64(ratio, max_rate);
+	if (!ratio) {
+		WARN_ONCE(1, "Reference frequency too low.\n");
+		return -EINVAL;
+	}
+
+	per_cpu(arch_max_freq_scale, cpu) = (unsigned long)ratio;
+
+	return 0;
+}
+
+static void amu_scale_freq_tick(void)
+{
+	u64 prev_core_cnt, prev_const_cnt;
+	u64 core_cnt, const_cnt, scale;
+
+	prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
+	prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
+
+	update_freq_counters_refs();
+
+	const_cnt = this_cpu_read(arch_const_cycles_prev);
+	core_cnt = this_cpu_read(arch_core_cycles_prev);
+
+	if (unlikely(core_cnt <= prev_core_cnt ||
+		     const_cnt <= prev_const_cnt))
+		return;
+
+	/*
+	 *	    /\core    arch_max_freq_scale
+	 * scale =  ------- * --------------------
+	 *	    /\const   SCHED_CAPACITY_SCALE
+	 *
+	 * See validate_cpu_freq_invariance_counters() for details on
+	 * arch_max_freq_scale and the use of SCHED_CAPACITY_SHIFT.
+	 */
+	scale = core_cnt - prev_core_cnt;
+	scale *= this_cpu_read(arch_max_freq_scale);
+	scale = div64_u64(scale >> SCHED_CAPACITY_SHIFT,
+			  const_cnt - prev_const_cnt);
+
+	scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
+	this_cpu_write(arch_freq_scale, (unsigned long)scale);
+}
+
+static struct scale_freq_data amu_sfd = {
+	.source = SCALE_FREQ_SOURCE_ARCH,
+	.set_freq_scale = amu_scale_freq_tick,
+};
+
+static void amu_fie_setup(const struct cpumask *cpus)
+{
+	int cpu;
+
+	/* We are already set since the last insmod of cpufreq driver */
+	if (unlikely(cpumask_subset(cpus, amu_fie_cpus)))
+		return;
+
+	for_each_cpu(cpu, cpus) {
+		if (!freq_counters_valid(cpu) ||
+		    freq_inv_set_max_ratio(cpu,
+					   cpufreq_get_hw_max_freq(cpu) * 1000ULL,
+					   arch_timer_get_rate()))
+			return;
+	}
+
+	cpumask_or(amu_fie_cpus, amu_fie_cpus, cpus);
+
+	topology_set_scale_freq_source(&amu_sfd, amu_fie_cpus);
+
+	pr_debug("CPUs[%*pbl]: counters will be used for FIE.",
+		 cpumask_pr_args(cpus));
+}
+
+static int init_amu_fie_callback(struct notifier_block *nb, unsigned long val,
+				 void *data)
+{
+	struct cpufreq_policy *policy = data;
+
+	if (val == CPUFREQ_CREATE_POLICY)
+		amu_fie_setup(policy->related_cpus);
+
+	/*
+	 * We don't need to handle CPUFREQ_REMOVE_POLICY event as the AMU
+	 * counters don't have any dependency on cpufreq driver once we have
+	 * initialized AMU support and enabled invariance. The AMU counters will
+	 * keep on working just fine in the absence of the cpufreq driver, and
+	 * for the CPUs for which there are no counters available, the last set
+	 * value of arch_freq_scale will remain valid as that is the frequency
+	 * those CPUs are running at.
+	 */
+
+	return 0;
+}
+
+static struct notifier_block init_amu_fie_notifier = {
+	.notifier_call = init_amu_fie_callback,
+};
+
+static int __init init_amu_fie(void)
+{
+	int ret;
+
+	if (!zalloc_cpumask_var(&amu_fie_cpus, GFP_KERNEL))
+		return -ENOMEM;
+
+	ret = cpufreq_register_notifier(&init_amu_fie_notifier,
+					CPUFREQ_POLICY_NOTIFIER);
+	if (ret)
+		free_cpumask_var(amu_fie_cpus);
+
+	return ret;
+}
+core_initcall(init_amu_fie);
+
+#ifdef CONFIG_ACPI_CPPC_LIB
+#include <acpi/cppc_acpi.h>
+
+static void cpu_read_corecnt(void *val)
+{
+	/*
+	 * A value of 0 can be returned if the current CPU does not support AMUs
+	 * or if the counter is disabled for this CPU. A return value of 0 at
+	 * counter read is properly handled as an error case by the users of the
+	 * counter.
+	 */
+	*(u64 *)val = read_corecnt();
+}
+
+static void cpu_read_constcnt(void *val)
+{
+	/*
+	 * Return 0 if the current CPU is affected by erratum 2457168. A value
+	 * of 0 is also returned if the current CPU does not support AMUs or if
+	 * the counter is disabled. A return value of 0 at counter read is
+	 * properly handled as an error case by the users of the counter.
+	 */
+	*(u64 *)val = this_cpu_has_cap(ARM64_WORKAROUND_2457168) ?
+		      0UL : read_constcnt();
+}
+
+static inline
+int counters_read_on_cpu(int cpu, smp_call_func_t func, u64 *val)
+{
+	/*
+	 * Abort call on counterless CPU or when interrupts are
+	 * disabled - can lead to deadlock in smp sync call.
+	 */
+	if (!cpu_has_amu_feat(cpu))
+		return -EOPNOTSUPP;
+
+	if (WARN_ON_ONCE(irqs_disabled()))
+		return -EPERM;
+
+	smp_call_function_single(cpu, func, val, 1);
+
+	return 0;
+}
+
+/*
+ * Refer to drivers/acpi/cppc_acpi.c for the description of the functions
+ * below.
+ */
+bool cpc_ffh_supported(void)
+{
+	int cpu = get_cpu_with_amu_feat();
+
+	/*
+	 * FFH is considered supported if there is at least one present CPU that
+	 * supports AMUs. Using FFH to read core and reference counters for CPUs
+	 * that do not support AMUs, have counters disabled or that are affected
+	 * by errata, will result in a return value of 0.
+	 *
+	 * This is done to allow any enabled and valid counters to be read
+	 * through FFH, knowing that potentially returning 0 as counter value is
+	 * properly handled by the users of these counters.
+	 */
+	if ((cpu >= nr_cpu_ids) || !cpumask_test_cpu(cpu, cpu_present_mask))
+		return false;
+
+	return true;
+}
+
+int cpc_read_ffh(int cpu, struct cpc_reg *reg, u64 *val)
+{
+	int ret = -EOPNOTSUPP;
+
+	switch ((u64)reg->address) {
+	case 0x0:
+		ret = counters_read_on_cpu(cpu, cpu_read_corecnt, val);
+		break;
+	case 0x1:
+		ret = counters_read_on_cpu(cpu, cpu_read_constcnt, val);
+		break;
+	}
+
+	if (!ret) {
+		*val &= GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				    reg->bit_offset);
+		*val >>= reg->bit_offset;
+	}
+
+	return ret;
+}
+
+int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_ACPI_CPPC_LIB */
diff --git a/arch/arm64/kernel/trace-events-emulation.h b/arch/arm64/kernel/trace-events-emulation.h
new file mode 100644
index 000000000..6c40f58b8
--- /dev/null
+++ b/arch/arm64/kernel/trace-events-emulation.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM emulation
+
+#if !defined(_TRACE_EMULATION_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EMULATION_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(instruction_emulation,
+
+	TP_PROTO(const char *instr, u64 addr),
+	TP_ARGS(instr, addr),
+
+	TP_STRUCT__entry(
+		__string(instr, instr)
+		__field(u64, addr)
+	),
+
+	TP_fast_assign(
+		__assign_str(instr, instr);
+		__entry->addr = addr;
+	),
+
+	TP_printk("instr=\"%s\" addr=0x%llx", __get_str(instr), __entry->addr)
+);
+
+#endif /* _TRACE_EMULATION_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+
+#define TRACE_INCLUDE_FILE trace-events-emulation
+#include <trace/define_trace.h>
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
new file mode 100644
index 000000000..8b70759cd
--- /dev/null
+++ b/arch/arm64/kernel/traps.c
@@ -0,0 +1,1192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/kernel/traps.c
+ *
+ * Copyright (C) 1995-2009 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/bug.h>
+#include <linux/context_tracking.h>
+#include <linux/signal.h>
+#include <linux/kallsyms.h>
+#include <linux/kprobes.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <linux/kdebug.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/task_stack.h>
+#include <linux/sizes.h>
+#include <linux/syscalls.h>
+#include <linux/mm_types.h>
+#include <linux/kasan.h>
+#include <linux/ubsan.h>
+#include <linux/cfi.h>
+
+#include <asm/atomic.h>
+#include <asm/bug.h>
+#include <asm/cpufeature.h>
+#include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
+#include <asm/efi.h>
+#include <asm/esr.h>
+#include <asm/exception.h>
+#include <asm/extable.h>
+#include <asm/insn.h>
+#include <asm/kprobes.h>
+#include <asm/patching.h>
+#include <asm/traps.h>
+#include <asm/smp.h>
+#include <asm/stack_pointer.h>
+#include <asm/stacktrace.h>
+#include <asm/system_misc.h>
+#include <asm/sysreg.h>
+
+static bool __kprobes __check_eq(unsigned long pstate)
+{
+	return (pstate & PSR_Z_BIT) != 0;
+}
+
+static bool __kprobes __check_ne(unsigned long pstate)
+{
+	return (pstate & PSR_Z_BIT) == 0;
+}
+
+static bool __kprobes __check_cs(unsigned long pstate)
+{
+	return (pstate & PSR_C_BIT) != 0;
+}
+
+static bool __kprobes __check_cc(unsigned long pstate)
+{
+	return (pstate & PSR_C_BIT) == 0;
+}
+
+static bool __kprobes __check_mi(unsigned long pstate)
+{
+	return (pstate & PSR_N_BIT) != 0;
+}
+
+static bool __kprobes __check_pl(unsigned long pstate)
+{
+	return (pstate & PSR_N_BIT) == 0;
+}
+
+static bool __kprobes __check_vs(unsigned long pstate)
+{
+	return (pstate & PSR_V_BIT) != 0;
+}
+
+static bool __kprobes __check_vc(unsigned long pstate)
+{
+	return (pstate & PSR_V_BIT) == 0;
+}
+
+static bool __kprobes __check_hi(unsigned long pstate)
+{
+	pstate &= ~(pstate >> 1);	/* PSR_C_BIT &= ~PSR_Z_BIT */
+	return (pstate & PSR_C_BIT) != 0;
+}
+
+static bool __kprobes __check_ls(unsigned long pstate)
+{
+	pstate &= ~(pstate >> 1);	/* PSR_C_BIT &= ~PSR_Z_BIT */
+	return (pstate & PSR_C_BIT) == 0;
+}
+
+static bool __kprobes __check_ge(unsigned long pstate)
+{
+	pstate ^= (pstate << 3);	/* PSR_N_BIT ^= PSR_V_BIT */
+	return (pstate & PSR_N_BIT) == 0;
+}
+
+static bool __kprobes __check_lt(unsigned long pstate)
+{
+	pstate ^= (pstate << 3);	/* PSR_N_BIT ^= PSR_V_BIT */
+	return (pstate & PSR_N_BIT) != 0;
+}
+
+static bool __kprobes __check_gt(unsigned long pstate)
+{
+	/*PSR_N_BIT ^= PSR_V_BIT */
+	unsigned long temp = pstate ^ (pstate << 3);
+
+	temp |= (pstate << 1);	/*PSR_N_BIT |= PSR_Z_BIT */
+	return (temp & PSR_N_BIT) == 0;
+}
+
+static bool __kprobes __check_le(unsigned long pstate)
+{
+	/*PSR_N_BIT ^= PSR_V_BIT */
+	unsigned long temp = pstate ^ (pstate << 3);
+
+	temp |= (pstate << 1);	/*PSR_N_BIT |= PSR_Z_BIT */
+	return (temp & PSR_N_BIT) != 0;
+}
+
+static bool __kprobes __check_al(unsigned long pstate)
+{
+	return true;
+}
+
+/*
+ * Note that the ARMv8 ARM calls condition code 0b1111 "nv", but states that
+ * it behaves identically to 0b1110 ("al").
+ */
+pstate_check_t * const aarch32_opcode_cond_checks[16] = {
+	__check_eq, __check_ne, __check_cs, __check_cc,
+	__check_mi, __check_pl, __check_vs, __check_vc,
+	__check_hi, __check_ls, __check_ge, __check_lt,
+	__check_gt, __check_le, __check_al, __check_al
+};
+
+int show_unhandled_signals = 0;
+
+static void dump_kernel_instr(const char *lvl, struct pt_regs *regs)
+{
+	unsigned long addr = instruction_pointer(regs);
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
+	int i;
+
+	if (user_mode(regs))
+		return;
+
+	for (i = -4; i < 1; i++) {
+		unsigned int val, bad;
+
+		bad = aarch64_insn_read(&((u32 *)addr)[i], &val);
+
+		if (!bad)
+			p += sprintf(p, i == 0 ? "(%08x) " : "%08x ", val);
+		else
+			p += sprintf(p, i == 0 ? "(????????) " : "???????? ");
+	}
+
+	printk("%sCode: %s\n", lvl, str);
+}
+
+#ifdef CONFIG_PREEMPT
+#define S_PREEMPT " PREEMPT"
+#elif defined(CONFIG_PREEMPT_RT)
+#define S_PREEMPT " PREEMPT_RT"
+#else
+#define S_PREEMPT ""
+#endif
+
+#define S_SMP " SMP"
+
+static int __die(const char *str, long err, struct pt_regs *regs)
+{
+	static int die_counter;
+	int ret;
+
+	pr_emerg("Internal error: %s: %016lx [#%d]" S_PREEMPT S_SMP "\n",
+		 str, err, ++die_counter);
+
+	/* trap and error numbers are mostly meaningless on ARM */
+	ret = notify_die(DIE_OOPS, str, regs, err, 0, SIGSEGV);
+	if (ret == NOTIFY_STOP)
+		return ret;
+
+	print_modules();
+	show_regs(regs);
+
+	dump_kernel_instr(KERN_EMERG, regs);
+
+	return ret;
+}
+
+static DEFINE_RAW_SPINLOCK(die_lock);
+
+/*
+ * This function is protected against re-entrancy.
+ */
+void die(const char *str, struct pt_regs *regs, long err)
+{
+	int ret;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&die_lock, flags);
+
+	oops_enter();
+
+	console_verbose();
+	bust_spinlocks(1);
+	ret = __die(str, err, regs);
+
+	if (regs && kexec_should_crash(current))
+		crash_kexec(regs);
+
+	bust_spinlocks(0);
+	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
+	oops_exit();
+
+	if (in_interrupt())
+		panic("%s: Fatal exception in interrupt", str);
+	if (panic_on_oops)
+		panic("%s: Fatal exception", str);
+
+	raw_spin_unlock_irqrestore(&die_lock, flags);
+
+	if (ret != NOTIFY_STOP)
+		make_task_dead(SIGSEGV);
+}
+
+static void arm64_show_signal(int signo, const char *str)
+{
+	static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
+				      DEFAULT_RATELIMIT_BURST);
+	struct task_struct *tsk = current;
+	unsigned long esr = tsk->thread.fault_code;
+	struct pt_regs *regs = task_pt_regs(tsk);
+
+	/* Leave if the signal won't be shown */
+	if (!show_unhandled_signals ||
+	    !unhandled_signal(tsk, signo) ||
+	    !__ratelimit(&rs))
+		return;
+
+	pr_info("%s[%d]: unhandled exception: ", tsk->comm, task_pid_nr(tsk));
+	if (esr)
+		pr_cont("%s, ESR 0x%016lx, ", esr_get_class_string(esr), esr);
+
+	pr_cont("%s", str);
+	print_vma_addr(KERN_CONT " in ", regs->pc);
+	pr_cont("\n");
+	__show_regs(regs);
+}
+
+void arm64_force_sig_fault(int signo, int code, unsigned long far,
+			   const char *str)
+{
+	arm64_show_signal(signo, str);
+	if (signo == SIGKILL)
+		force_sig(SIGKILL);
+	else
+		force_sig_fault(signo, code, (void __user *)far);
+}
+
+void arm64_force_sig_mceerr(int code, unsigned long far, short lsb,
+			    const char *str)
+{
+	arm64_show_signal(SIGBUS, str);
+	force_sig_mceerr(code, (void __user *)far, lsb);
+}
+
+void arm64_force_sig_ptrace_errno_trap(int errno, unsigned long far,
+				       const char *str)
+{
+	arm64_show_signal(SIGTRAP, str);
+	force_sig_ptrace_errno_trap(errno, (void __user *)far);
+}
+
+void arm64_notify_die(const char *str, struct pt_regs *regs,
+		      int signo, int sicode, unsigned long far,
+		      unsigned long err)
+{
+	if (user_mode(regs)) {
+		WARN_ON(regs != current_pt_regs());
+		current->thread.fault_address = 0;
+		current->thread.fault_code = err;
+
+		arm64_force_sig_fault(signo, sicode, far, str);
+	} else {
+		die(str, regs, err);
+	}
+}
+
+#ifdef CONFIG_COMPAT
+#define PSTATE_IT_1_0_SHIFT	25
+#define PSTATE_IT_1_0_MASK	(0x3 << PSTATE_IT_1_0_SHIFT)
+#define PSTATE_IT_7_2_SHIFT	10
+#define PSTATE_IT_7_2_MASK	(0x3f << PSTATE_IT_7_2_SHIFT)
+
+static u32 compat_get_it_state(struct pt_regs *regs)
+{
+	u32 it, pstate = regs->pstate;
+
+	it  = (pstate & PSTATE_IT_1_0_MASK) >> PSTATE_IT_1_0_SHIFT;
+	it |= ((pstate & PSTATE_IT_7_2_MASK) >> PSTATE_IT_7_2_SHIFT) << 2;
+
+	return it;
+}
+
+static void compat_set_it_state(struct pt_regs *regs, u32 it)
+{
+	u32 pstate_it;
+
+	pstate_it  = (it << PSTATE_IT_1_0_SHIFT) & PSTATE_IT_1_0_MASK;
+	pstate_it |= ((it >> 2) << PSTATE_IT_7_2_SHIFT) & PSTATE_IT_7_2_MASK;
+
+	regs->pstate &= ~PSR_AA32_IT_MASK;
+	regs->pstate |= pstate_it;
+}
+
+static void advance_itstate(struct pt_regs *regs)
+{
+	u32 it;
+
+	/* ARM mode */
+	if (!(regs->pstate & PSR_AA32_T_BIT) ||
+	    !(regs->pstate & PSR_AA32_IT_MASK))
+		return;
+
+	it  = compat_get_it_state(regs);
+
+	/*
+	 * If this is the last instruction of the block, wipe the IT
+	 * state. Otherwise advance it.
+	 */
+	if (!(it & 7))
+		it = 0;
+	else
+		it = (it & 0xe0) | ((it << 1) & 0x1f);
+
+	compat_set_it_state(regs, it);
+}
+#else
+static void advance_itstate(struct pt_regs *regs)
+{
+}
+#endif
+
+void arm64_skip_faulting_instruction(struct pt_regs *regs, unsigned long size)
+{
+	regs->pc += size;
+
+	/*
+	 * If we were single stepping, we want to get the step exception after
+	 * we return from the trap.
+	 */
+	if (user_mode(regs))
+		user_fastforward_single_step(current);
+
+	if (compat_user_mode(regs))
+		advance_itstate(regs);
+	else
+		regs->pstate &= ~PSR_BTYPE_MASK;
+}
+
+static int user_insn_read(struct pt_regs *regs, u32 *insnp)
+{
+	u32 instr;
+	unsigned long pc = instruction_pointer(regs);
+
+	if (compat_thumb_mode(regs)) {
+		/* 16-bit Thumb instruction */
+		__le16 instr_le;
+		if (get_user(instr_le, (__le16 __user *)pc))
+			return -EFAULT;
+		instr = le16_to_cpu(instr_le);
+		if (aarch32_insn_is_wide(instr)) {
+			u32 instr2;
+
+			if (get_user(instr_le, (__le16 __user *)(pc + 2)))
+				return -EFAULT;
+			instr2 = le16_to_cpu(instr_le);
+			instr = (instr << 16) | instr2;
+		}
+	} else {
+		/* 32-bit ARM instruction */
+		__le32 instr_le;
+		if (get_user(instr_le, (__le32 __user *)pc))
+			return -EFAULT;
+		instr = le32_to_cpu(instr_le);
+	}
+
+	*insnp = instr;
+	return 0;
+}
+
+void force_signal_inject(int signal, int code, unsigned long address, unsigned long err)
+{
+	const char *desc;
+	struct pt_regs *regs = current_pt_regs();
+
+	if (WARN_ON(!user_mode(regs)))
+		return;
+
+	switch (signal) {
+	case SIGILL:
+		desc = "undefined instruction";
+		break;
+	case SIGSEGV:
+		desc = "illegal memory access";
+		break;
+	default:
+		desc = "unknown or unrecoverable error";
+		break;
+	}
+
+	/* Force signals we don't understand to SIGKILL */
+	if (WARN_ON(signal != SIGKILL &&
+		    siginfo_layout(signal, code) != SIL_FAULT)) {
+		signal = SIGKILL;
+	}
+
+	arm64_notify_die(desc, regs, signal, code, address, err);
+}
+
+/*
+ * Set up process info to signal segmentation fault - called on access error.
+ */
+void arm64_notify_segfault(unsigned long addr)
+{
+	int code;
+
+	mmap_read_lock(current->mm);
+	if (find_vma(current->mm, untagged_addr(addr)) == NULL)
+		code = SEGV_MAPERR;
+	else
+		code = SEGV_ACCERR;
+	mmap_read_unlock(current->mm);
+
+	force_signal_inject(SIGSEGV, code, addr, 0);
+}
+
+void do_el0_undef(struct pt_regs *regs, unsigned long esr)
+{
+	u32 insn;
+
+	/* check for AArch32 breakpoint instructions */
+	if (!aarch32_break_handler(regs))
+		return;
+
+	if (user_insn_read(regs, &insn))
+		goto out_err;
+
+	if (try_emulate_mrs(regs, insn))
+		return;
+
+	if (try_emulate_armv8_deprecated(regs, insn))
+		return;
+
+out_err:
+	force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+}
+
+void do_el1_undef(struct pt_regs *regs, unsigned long esr)
+{
+	u32 insn;
+
+	if (aarch64_insn_read((void *)regs->pc, &insn))
+		goto out_err;
+
+	if (try_emulate_el1_ssbs(regs, insn))
+		return;
+
+out_err:
+	die("Oops - Undefined instruction", regs, esr);
+}
+
+void do_el0_bti(struct pt_regs *regs)
+{
+	force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+}
+
+void do_el1_bti(struct pt_regs *regs, unsigned long esr)
+{
+	if (efi_runtime_fixup_exception(regs, "BTI violation")) {
+		regs->pstate &= ~PSR_BTYPE_MASK;
+		return;
+	}
+	die("Oops - BTI", regs, esr);
+}
+
+void do_el0_fpac(struct pt_regs *regs, unsigned long esr)
+{
+	force_signal_inject(SIGILL, ILL_ILLOPN, regs->pc, esr);
+}
+
+void do_el1_fpac(struct pt_regs *regs, unsigned long esr)
+{
+	/*
+	 * Unexpected FPAC exception in the kernel: kill the task before it
+	 * does any more harm.
+	 */
+	die("Oops - FPAC", regs, esr);
+}
+
+void do_el0_mops(struct pt_regs *regs, unsigned long esr)
+{
+	bool wrong_option = esr & ESR_ELx_MOPS_ISS_WRONG_OPTION;
+	bool option_a = esr & ESR_ELx_MOPS_ISS_OPTION_A;
+	int dstreg = ESR_ELx_MOPS_ISS_DESTREG(esr);
+	int srcreg = ESR_ELx_MOPS_ISS_SRCREG(esr);
+	int sizereg = ESR_ELx_MOPS_ISS_SIZEREG(esr);
+	unsigned long dst, src, size;
+
+	dst = pt_regs_read_reg(regs, dstreg);
+	src = pt_regs_read_reg(regs, srcreg);
+	size = pt_regs_read_reg(regs, sizereg);
+
+	/*
+	 * Put the registers back in the original format suitable for a
+	 * prologue instruction, using the generic return routine from the
+	 * Arm ARM (DDI 0487I.a) rules CNTMJ and MWFQH.
+	 */
+	if (esr & ESR_ELx_MOPS_ISS_MEM_INST) {
+		/* SET* instruction */
+		if (option_a ^ wrong_option) {
+			/* Format is from Option A; forward set */
+			pt_regs_write_reg(regs, dstreg, dst + size);
+			pt_regs_write_reg(regs, sizereg, -size);
+		}
+	} else {
+		/* CPY* instruction */
+		if (!(option_a ^ wrong_option)) {
+			/* Format is from Option B */
+			if (regs->pstate & PSR_N_BIT) {
+				/* Backward copy */
+				pt_regs_write_reg(regs, dstreg, dst - size);
+				pt_regs_write_reg(regs, srcreg, src - size);
+			}
+		} else {
+			/* Format is from Option A */
+			if (size & BIT(63)) {
+				/* Forward copy */
+				pt_regs_write_reg(regs, dstreg, dst + size);
+				pt_regs_write_reg(regs, srcreg, src + size);
+				pt_regs_write_reg(regs, sizereg, -size);
+			}
+		}
+	}
+
+	if (esr & ESR_ELx_MOPS_ISS_FROM_EPILOGUE)
+		regs->pc -= 8;
+	else
+		regs->pc -= 4;
+
+	/*
+	 * If single stepping then finish the step before executing the
+	 * prologue instruction.
+	 */
+	user_fastforward_single_step(current);
+}
+
+#define __user_cache_maint(insn, address, res)			\
+	if (address >= TASK_SIZE_MAX) {				\
+		res = -EFAULT;					\
+	} else {						\
+		uaccess_ttbr0_enable();				\
+		asm volatile (					\
+			"1:	" insn ", %1\n"			\
+			"	mov	%w0, #0\n"		\
+			"2:\n"					\
+			_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0)	\
+			: "=r" (res)				\
+			: "r" (address));			\
+		uaccess_ttbr0_disable();			\
+	}
+
+static void user_cache_maint_handler(unsigned long esr, struct pt_regs *regs)
+{
+	unsigned long tagged_address, address;
+	int rt = ESR_ELx_SYS64_ISS_RT(esr);
+	int crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT;
+	int ret = 0;
+
+	tagged_address = pt_regs_read_reg(regs, rt);
+	address = untagged_addr(tagged_address);
+
+	switch (crm) {
+	case ESR_ELx_SYS64_ISS_CRM_DC_CVAU:	/* DC CVAU, gets promoted */
+		__user_cache_maint("dc civac", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_DC_CVAC:	/* DC CVAC, gets promoted */
+		__user_cache_maint("dc civac", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_DC_CVADP:	/* DC CVADP */
+		__user_cache_maint("sys 3, c7, c13, 1", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_DC_CVAP:	/* DC CVAP */
+		__user_cache_maint("sys 3, c7, c12, 1", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_DC_CIVAC:	/* DC CIVAC */
+		__user_cache_maint("dc civac", address, ret);
+		break;
+	case ESR_ELx_SYS64_ISS_CRM_IC_IVAU:	/* IC IVAU */
+		__user_cache_maint("ic ivau", address, ret);
+		break;
+	default:
+		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+		return;
+	}
+
+	if (ret)
+		arm64_notify_segfault(tagged_address);
+	else
+		arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+}
+
+static void ctr_read_handler(unsigned long esr, struct pt_regs *regs)
+{
+	int rt = ESR_ELx_SYS64_ISS_RT(esr);
+	unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0);
+
+	if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) {
+		/* Hide DIC so that we can trap the unnecessary maintenance...*/
+		val &= ~BIT(CTR_EL0_DIC_SHIFT);
+
+		/* ... and fake IminLine to reduce the number of traps. */
+		val &= ~CTR_EL0_IminLine_MASK;
+		val |= (PAGE_SHIFT - 2) & CTR_EL0_IminLine_MASK;
+	}
+
+	pt_regs_write_reg(regs, rt, val);
+
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+}
+
+static void cntvct_read_handler(unsigned long esr, struct pt_regs *regs)
+{
+	int rt = ESR_ELx_SYS64_ISS_RT(esr);
+
+	pt_regs_write_reg(regs, rt, arch_timer_read_counter());
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+}
+
+static void cntfrq_read_handler(unsigned long esr, struct pt_regs *regs)
+{
+	int rt = ESR_ELx_SYS64_ISS_RT(esr);
+
+	pt_regs_write_reg(regs, rt, arch_timer_get_rate());
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+}
+
+static void mrs_handler(unsigned long esr, struct pt_regs *regs)
+{
+	u32 sysreg, rt;
+
+	rt = ESR_ELx_SYS64_ISS_RT(esr);
+	sysreg = esr_sys64_to_sysreg(esr);
+
+	if (do_emulate_mrs(regs, sysreg, rt) != 0)
+		force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc, 0);
+}
+
+static void wfi_handler(unsigned long esr, struct pt_regs *regs)
+{
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+}
+
+struct sys64_hook {
+	unsigned long esr_mask;
+	unsigned long esr_val;
+	void (*handler)(unsigned long esr, struct pt_regs *regs);
+};
+
+static const struct sys64_hook sys64_hooks[] = {
+	{
+		.esr_mask = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL,
+		.handler = user_cache_maint_handler,
+	},
+	{
+		/* Trap read access to CTR_EL0 */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_CTR_READ,
+		.handler = ctr_read_handler,
+	},
+	{
+		/* Trap read access to CNTVCT_EL0 */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_CNTVCT,
+		.handler = cntvct_read_handler,
+	},
+	{
+		/* Trap read access to CNTVCTSS_EL0 */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_CNTVCTSS,
+		.handler = cntvct_read_handler,
+	},
+	{
+		/* Trap read access to CNTFRQ_EL0 */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_CNTFRQ,
+		.handler = cntfrq_read_handler,
+	},
+	{
+		/* Trap read access to CPUID registers */
+		.esr_mask = ESR_ELx_SYS64_ISS_SYS_MRS_OP_MASK,
+		.esr_val = ESR_ELx_SYS64_ISS_SYS_MRS_OP_VAL,
+		.handler = mrs_handler,
+	},
+	{
+		/* Trap WFI instructions executed in userspace */
+		.esr_mask = ESR_ELx_WFx_MASK,
+		.esr_val = ESR_ELx_WFx_WFI_VAL,
+		.handler = wfi_handler,
+	},
+	{},
+};
+
+#ifdef CONFIG_COMPAT
+static bool cp15_cond_valid(unsigned long esr, struct pt_regs *regs)
+{
+	int cond;
+
+	/* Only a T32 instruction can trap without CV being set */
+	if (!(esr & ESR_ELx_CV)) {
+		u32 it;
+
+		it = compat_get_it_state(regs);
+		if (!it)
+			return true;
+
+		cond = it >> 4;
+	} else {
+		cond = (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT;
+	}
+
+	return aarch32_opcode_cond_checks[cond](regs->pstate);
+}
+
+static void compat_cntfrq_read_handler(unsigned long esr, struct pt_regs *regs)
+{
+	int reg = (esr & ESR_ELx_CP15_32_ISS_RT_MASK) >> ESR_ELx_CP15_32_ISS_RT_SHIFT;
+
+	pt_regs_write_reg(regs, reg, arch_timer_get_rate());
+	arm64_skip_faulting_instruction(regs, 4);
+}
+
+static const struct sys64_hook cp15_32_hooks[] = {
+	{
+		.esr_mask = ESR_ELx_CP15_32_ISS_SYS_MASK,
+		.esr_val = ESR_ELx_CP15_32_ISS_SYS_CNTFRQ,
+		.handler = compat_cntfrq_read_handler,
+	},
+	{},
+};
+
+static void compat_cntvct_read_handler(unsigned long esr, struct pt_regs *regs)
+{
+	int rt = (esr & ESR_ELx_CP15_64_ISS_RT_MASK) >> ESR_ELx_CP15_64_ISS_RT_SHIFT;
+	int rt2 = (esr & ESR_ELx_CP15_64_ISS_RT2_MASK) >> ESR_ELx_CP15_64_ISS_RT2_SHIFT;
+	u64 val = arch_timer_read_counter();
+
+	pt_regs_write_reg(regs, rt, lower_32_bits(val));
+	pt_regs_write_reg(regs, rt2, upper_32_bits(val));
+	arm64_skip_faulting_instruction(regs, 4);
+}
+
+static const struct sys64_hook cp15_64_hooks[] = {
+	{
+		.esr_mask = ESR_ELx_CP15_64_ISS_SYS_MASK,
+		.esr_val = ESR_ELx_CP15_64_ISS_SYS_CNTVCT,
+		.handler = compat_cntvct_read_handler,
+	},
+	{
+		.esr_mask = ESR_ELx_CP15_64_ISS_SYS_MASK,
+		.esr_val = ESR_ELx_CP15_64_ISS_SYS_CNTVCTSS,
+		.handler = compat_cntvct_read_handler,
+	},
+	{},
+};
+
+void do_el0_cp15(unsigned long esr, struct pt_regs *regs)
+{
+	const struct sys64_hook *hook, *hook_base;
+
+	if (!cp15_cond_valid(esr, regs)) {
+		/*
+		 * There is no T16 variant of a CP access, so we
+		 * always advance PC by 4 bytes.
+		 */
+		arm64_skip_faulting_instruction(regs, 4);
+		return;
+	}
+
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_CP15_32:
+		hook_base = cp15_32_hooks;
+		break;
+	case ESR_ELx_EC_CP15_64:
+		hook_base = cp15_64_hooks;
+		break;
+	default:
+		do_el0_undef(regs, esr);
+		return;
+	}
+
+	for (hook = hook_base; hook->handler; hook++)
+		if ((hook->esr_mask & esr) == hook->esr_val) {
+			hook->handler(esr, regs);
+			return;
+		}
+
+	/*
+	 * New cp15 instructions may previously have been undefined at
+	 * EL0. Fall back to our usual undefined instruction handler
+	 * so that we handle these consistently.
+	 */
+	do_el0_undef(regs, esr);
+}
+#endif
+
+void do_el0_sys(unsigned long esr, struct pt_regs *regs)
+{
+	const struct sys64_hook *hook;
+
+	for (hook = sys64_hooks; hook->handler; hook++)
+		if ((hook->esr_mask & esr) == hook->esr_val) {
+			hook->handler(esr, regs);
+			return;
+		}
+
+	/*
+	 * New SYS instructions may previously have been undefined at EL0. Fall
+	 * back to our usual undefined instruction handler so that we handle
+	 * these consistently.
+	 */
+	do_el0_undef(regs, esr);
+}
+
+static const char *esr_class_str[] = {
+	[0 ... ESR_ELx_EC_MAX]		= "UNRECOGNIZED EC",
+	[ESR_ELx_EC_UNKNOWN]		= "Unknown/Uncategorized",
+	[ESR_ELx_EC_WFx]		= "WFI/WFE",
+	[ESR_ELx_EC_CP15_32]		= "CP15 MCR/MRC",
+	[ESR_ELx_EC_CP15_64]		= "CP15 MCRR/MRRC",
+	[ESR_ELx_EC_CP14_MR]		= "CP14 MCR/MRC",
+	[ESR_ELx_EC_CP14_LS]		= "CP14 LDC/STC",
+	[ESR_ELx_EC_FP_ASIMD]		= "ASIMD",
+	[ESR_ELx_EC_CP10_ID]		= "CP10 MRC/VMRS",
+	[ESR_ELx_EC_PAC]		= "PAC",
+	[ESR_ELx_EC_CP14_64]		= "CP14 MCRR/MRRC",
+	[ESR_ELx_EC_BTI]		= "BTI",
+	[ESR_ELx_EC_ILL]		= "PSTATE.IL",
+	[ESR_ELx_EC_SVC32]		= "SVC (AArch32)",
+	[ESR_ELx_EC_HVC32]		= "HVC (AArch32)",
+	[ESR_ELx_EC_SMC32]		= "SMC (AArch32)",
+	[ESR_ELx_EC_SVC64]		= "SVC (AArch64)",
+	[ESR_ELx_EC_HVC64]		= "HVC (AArch64)",
+	[ESR_ELx_EC_SMC64]		= "SMC (AArch64)",
+	[ESR_ELx_EC_SYS64]		= "MSR/MRS (AArch64)",
+	[ESR_ELx_EC_SVE]		= "SVE",
+	[ESR_ELx_EC_ERET]		= "ERET/ERETAA/ERETAB",
+	[ESR_ELx_EC_FPAC]		= "FPAC",
+	[ESR_ELx_EC_SME]		= "SME",
+	[ESR_ELx_EC_IMP_DEF]		= "EL3 IMP DEF",
+	[ESR_ELx_EC_IABT_LOW]		= "IABT (lower EL)",
+	[ESR_ELx_EC_IABT_CUR]		= "IABT (current EL)",
+	[ESR_ELx_EC_PC_ALIGN]		= "PC Alignment",
+	[ESR_ELx_EC_DABT_LOW]		= "DABT (lower EL)",
+	[ESR_ELx_EC_DABT_CUR]		= "DABT (current EL)",
+	[ESR_ELx_EC_SP_ALIGN]		= "SP Alignment",
+	[ESR_ELx_EC_MOPS]		= "MOPS",
+	[ESR_ELx_EC_FP_EXC32]		= "FP (AArch32)",
+	[ESR_ELx_EC_FP_EXC64]		= "FP (AArch64)",
+	[ESR_ELx_EC_SERROR]		= "SError",
+	[ESR_ELx_EC_BREAKPT_LOW]	= "Breakpoint (lower EL)",
+	[ESR_ELx_EC_BREAKPT_CUR]	= "Breakpoint (current EL)",
+	[ESR_ELx_EC_SOFTSTP_LOW]	= "Software Step (lower EL)",
+	[ESR_ELx_EC_SOFTSTP_CUR]	= "Software Step (current EL)",
+	[ESR_ELx_EC_WATCHPT_LOW]	= "Watchpoint (lower EL)",
+	[ESR_ELx_EC_WATCHPT_CUR]	= "Watchpoint (current EL)",
+	[ESR_ELx_EC_BKPT32]		= "BKPT (AArch32)",
+	[ESR_ELx_EC_VECTOR32]		= "Vector catch (AArch32)",
+	[ESR_ELx_EC_BRK64]		= "BRK (AArch64)",
+};
+
+const char *esr_get_class_string(unsigned long esr)
+{
+	return esr_class_str[ESR_ELx_EC(esr)];
+}
+
+/*
+ * bad_el0_sync handles unexpected, but potentially recoverable synchronous
+ * exceptions taken from EL0.
+ */
+void bad_el0_sync(struct pt_regs *regs, int reason, unsigned long esr)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+	current->thread.fault_address = 0;
+	current->thread.fault_code = esr;
+
+	arm64_force_sig_fault(SIGILL, ILL_ILLOPC, pc,
+			      "Bad EL0 synchronous exception");
+}
+
+#ifdef CONFIG_VMAP_STACK
+
+DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack)
+	__aligned(16);
+
+void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far)
+{
+	unsigned long tsk_stk = (unsigned long)current->stack;
+	unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
+	unsigned long ovf_stk = (unsigned long)this_cpu_ptr(overflow_stack);
+
+	console_verbose();
+	pr_emerg("Insufficient stack space to handle exception!");
+
+	pr_emerg("ESR: 0x%016lx -- %s\n", esr, esr_get_class_string(esr));
+	pr_emerg("FAR: 0x%016lx\n", far);
+
+	pr_emerg("Task stack:     [0x%016lx..0x%016lx]\n",
+		 tsk_stk, tsk_stk + THREAD_SIZE);
+	pr_emerg("IRQ stack:      [0x%016lx..0x%016lx]\n",
+		 irq_stk, irq_stk + IRQ_STACK_SIZE);
+	pr_emerg("Overflow stack: [0x%016lx..0x%016lx]\n",
+		 ovf_stk, ovf_stk + OVERFLOW_STACK_SIZE);
+
+	__show_regs(regs);
+
+	/*
+	 * We use nmi_panic to limit the potential for recusive overflows, and
+	 * to get a better stack trace.
+	 */
+	nmi_panic(NULL, "kernel stack overflow");
+	cpu_park_loop();
+}
+#endif
+
+void __noreturn arm64_serror_panic(struct pt_regs *regs, unsigned long esr)
+{
+	console_verbose();
+
+	pr_crit("SError Interrupt on CPU%d, code 0x%016lx -- %s\n",
+		smp_processor_id(), esr, esr_get_class_string(esr));
+	if (regs)
+		__show_regs(regs);
+
+	nmi_panic(regs, "Asynchronous SError Interrupt");
+
+	cpu_park_loop();
+}
+
+bool arm64_is_fatal_ras_serror(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long aet = arm64_ras_serror_get_severity(esr);
+
+	switch (aet) {
+	case ESR_ELx_AET_CE:	/* corrected error */
+	case ESR_ELx_AET_UEO:	/* restartable, not yet consumed */
+		/*
+		 * The CPU can make progress. We may take UEO again as
+		 * a more severe error.
+		 */
+		return false;
+
+	case ESR_ELx_AET_UEU:	/* Uncorrected Unrecoverable */
+	case ESR_ELx_AET_UER:	/* Uncorrected Recoverable */
+		/*
+		 * The CPU can't make progress. The exception may have
+		 * been imprecise.
+		 *
+		 * Neoverse-N1 #1349291 means a non-KVM SError reported as
+		 * Unrecoverable should be treated as Uncontainable. We
+		 * call arm64_serror_panic() in both cases.
+		 */
+		return true;
+
+	case ESR_ELx_AET_UC:	/* Uncontainable or Uncategorized error */
+	default:
+		/* Error has been silently propagated */
+		arm64_serror_panic(regs, esr);
+	}
+}
+
+void do_serror(struct pt_regs *regs, unsigned long esr)
+{
+	/* non-RAS errors are not containable */
+	if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(regs, esr))
+		arm64_serror_panic(regs, esr);
+}
+
+/* GENERIC_BUG traps */
+#ifdef CONFIG_GENERIC_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	/*
+	 * bug_handler() only called for BRK #BUG_BRK_IMM.
+	 * So the answer is trivial -- any spurious instances with no
+	 * bug table entry will be rejected by report_bug() and passed
+	 * back to the debug-monitors code and handled as a fatal
+	 * unexpected debug exception.
+	 */
+	return 1;
+}
+#endif
+
+static int bug_handler(struct pt_regs *regs, unsigned long esr)
+{
+	switch (report_bug(regs->pc, regs)) {
+	case BUG_TRAP_TYPE_BUG:
+		die("Oops - BUG", regs, esr);
+		break;
+
+	case BUG_TRAP_TYPE_WARN:
+		break;
+
+	default:
+		/* unknown/unrecognised bug trap type */
+		return DBG_HOOK_ERROR;
+	}
+
+	/* If thread survives, skip over the BUG instruction and continue: */
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+	return DBG_HOOK_HANDLED;
+}
+
+static struct break_hook bug_break_hook = {
+	.fn = bug_handler,
+	.imm = BUG_BRK_IMM,
+};
+
+#ifdef CONFIG_CFI_CLANG
+static int cfi_handler(struct pt_regs *regs, unsigned long esr)
+{
+	unsigned long target;
+	u32 type;
+
+	target = pt_regs_read_reg(regs, FIELD_GET(CFI_BRK_IMM_TARGET, esr));
+	type = (u32)pt_regs_read_reg(regs, FIELD_GET(CFI_BRK_IMM_TYPE, esr));
+
+	switch (report_cfi_failure(regs, regs->pc, &target, type)) {
+	case BUG_TRAP_TYPE_BUG:
+		die("Oops - CFI", regs, esr);
+		break;
+
+	case BUG_TRAP_TYPE_WARN:
+		break;
+
+	default:
+		return DBG_HOOK_ERROR;
+	}
+
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+	return DBG_HOOK_HANDLED;
+}
+
+static struct break_hook cfi_break_hook = {
+	.fn = cfi_handler,
+	.imm = CFI_BRK_IMM_BASE,
+	.mask = CFI_BRK_IMM_MASK,
+};
+#endif /* CONFIG_CFI_CLANG */
+
+static int reserved_fault_handler(struct pt_regs *regs, unsigned long esr)
+{
+	pr_err("%s generated an invalid instruction at %pS!\n",
+		"Kernel text patching",
+		(void *)instruction_pointer(regs));
+
+	/* We cannot handle this */
+	return DBG_HOOK_ERROR;
+}
+
+static struct break_hook fault_break_hook = {
+	.fn = reserved_fault_handler,
+	.imm = FAULT_BRK_IMM,
+};
+
+#ifdef CONFIG_KASAN_SW_TAGS
+
+#define KASAN_ESR_RECOVER	0x20
+#define KASAN_ESR_WRITE	0x10
+#define KASAN_ESR_SIZE_MASK	0x0f
+#define KASAN_ESR_SIZE(esr)	(1 << ((esr) & KASAN_ESR_SIZE_MASK))
+
+static int kasan_handler(struct pt_regs *regs, unsigned long esr)
+{
+	bool recover = esr & KASAN_ESR_RECOVER;
+	bool write = esr & KASAN_ESR_WRITE;
+	size_t size = KASAN_ESR_SIZE(esr);
+	void *addr = (void *)regs->regs[0];
+	u64 pc = regs->pc;
+
+	kasan_report(addr, size, write, pc);
+
+	/*
+	 * The instrumentation allows to control whether we can proceed after
+	 * a crash was detected. This is done by passing the -recover flag to
+	 * the compiler. Disabling recovery allows to generate more compact
+	 * code.
+	 *
+	 * Unfortunately disabling recovery doesn't work for the kernel right
+	 * now. KASAN reporting is disabled in some contexts (for example when
+	 * the allocator accesses slab object metadata; this is controlled by
+	 * current->kasan_depth). All these accesses are detected by the tool,
+	 * even though the reports for them are not printed.
+	 *
+	 * This is something that might be fixed at some point in the future.
+	 */
+	if (!recover)
+		die("Oops - KASAN", regs, esr);
+
+	/* If thread survives, skip over the brk instruction and continue: */
+	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
+	return DBG_HOOK_HANDLED;
+}
+
+static struct break_hook kasan_break_hook = {
+	.fn	= kasan_handler,
+	.imm	= KASAN_BRK_IMM,
+	.mask	= KASAN_BRK_MASK,
+};
+#endif
+
+#ifdef CONFIG_UBSAN_TRAP
+static int ubsan_handler(struct pt_regs *regs, unsigned long esr)
+{
+	die(report_ubsan_failure(regs, esr & UBSAN_BRK_MASK), regs, esr);
+	return DBG_HOOK_HANDLED;
+}
+
+static struct break_hook ubsan_break_hook = {
+	.fn	= ubsan_handler,
+	.imm	= UBSAN_BRK_IMM,
+	.mask	= UBSAN_BRK_MASK,
+};
+#endif
+
+#define esr_comment(esr) ((esr) & ESR_ELx_BRK64_ISS_COMMENT_MASK)
+
+/*
+ * Initial handler for AArch64 BRK exceptions
+ * This handler only used until debug_traps_init().
+ */
+int __init early_brk64(unsigned long addr, unsigned long esr,
+		struct pt_regs *regs)
+{
+#ifdef CONFIG_CFI_CLANG
+	if ((esr_comment(esr) & ~CFI_BRK_IMM_MASK) == CFI_BRK_IMM_BASE)
+		return cfi_handler(regs, esr) != DBG_HOOK_HANDLED;
+#endif
+#ifdef CONFIG_KASAN_SW_TAGS
+	if ((esr_comment(esr) & ~KASAN_BRK_MASK) == KASAN_BRK_IMM)
+		return kasan_handler(regs, esr) != DBG_HOOK_HANDLED;
+#endif
+#ifdef CONFIG_UBSAN_TRAP
+	if ((esr_comment(esr) & ~UBSAN_BRK_MASK) == UBSAN_BRK_IMM)
+		return ubsan_handler(regs, esr) != DBG_HOOK_HANDLED;
+#endif
+	return bug_handler(regs, esr) != DBG_HOOK_HANDLED;
+}
+
+void __init trap_init(void)
+{
+	register_kernel_break_hook(&bug_break_hook);
+#ifdef CONFIG_CFI_CLANG
+	register_kernel_break_hook(&cfi_break_hook);
+#endif
+	register_kernel_break_hook(&fault_break_hook);
+#ifdef CONFIG_KASAN_SW_TAGS
+	register_kernel_break_hook(&kasan_break_hook);
+#endif
+#ifdef CONFIG_UBSAN_TRAP
+	register_kernel_break_hook(&ubsan_break_hook);
+#endif
+	debug_traps_init();
+}
diff --git a/arch/arm64/kernel/vdso-wrap.S b/arch/arm64/kernel/vdso-wrap.S
new file mode 100644
index 000000000..c4b1990bf
--- /dev/null
+++ b/arch/arm64/kernel/vdso-wrap.S
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+	.globl vdso_start, vdso_end
+	.section .rodata
+	.balign PAGE_SIZE
+vdso_start:
+	.incbin "arch/arm64/kernel/vdso/vdso.so"
+	.balign PAGE_SIZE
+vdso_end:
+
+	.previous
+
+emit_aarch64_feature_1_and
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
new file mode 100644
index 000000000..d9e135573
--- /dev/null
+++ b/arch/arm64/kernel/vdso.c
@@ -0,0 +1,451 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VDSO implementations.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/cache.h>
+#include <linux/clocksource.h>
+#include <linux/elf.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/time_namespace.h>
+#include <linux/timekeeper_internal.h>
+#include <linux/vmalloc.h>
+#include <vdso/datapage.h>
+#include <vdso/helpers.h>
+#include <vdso/vsyscall.h>
+
+#include <asm/cacheflush.h>
+#include <asm/signal32.h>
+#include <asm/vdso.h>
+
+enum vdso_abi {
+	VDSO_ABI_AA64,
+	VDSO_ABI_AA32,
+};
+
+enum vvar_pages {
+	VVAR_DATA_PAGE_OFFSET,
+	VVAR_TIMENS_PAGE_OFFSET,
+	VVAR_NR_PAGES,
+};
+
+struct vdso_abi_info {
+	const char *name;
+	const char *vdso_code_start;
+	const char *vdso_code_end;
+	unsigned long vdso_pages;
+	/* Data Mapping */
+	struct vm_special_mapping *dm;
+	/* Code Mapping */
+	struct vm_special_mapping *cm;
+};
+
+static struct vdso_abi_info vdso_info[] __ro_after_init = {
+	[VDSO_ABI_AA64] = {
+		.name = "vdso",
+		.vdso_code_start = vdso_start,
+		.vdso_code_end = vdso_end,
+	},
+#ifdef CONFIG_COMPAT_VDSO
+	[VDSO_ABI_AA32] = {
+		.name = "vdso32",
+		.vdso_code_start = vdso32_start,
+		.vdso_code_end = vdso32_end,
+	},
+#endif /* CONFIG_COMPAT_VDSO */
+};
+
+/*
+ * The vDSO data page.
+ */
+static union {
+	struct vdso_data	data[CS_BASES];
+	u8			page[PAGE_SIZE];
+} vdso_data_store __page_aligned_data;
+struct vdso_data *vdso_data = vdso_data_store.data;
+
+static int vdso_mremap(const struct vm_special_mapping *sm,
+		struct vm_area_struct *new_vma)
+{
+	current->mm->context.vdso = (void *)new_vma->vm_start;
+
+	return 0;
+}
+
+static int __init __vdso_init(enum vdso_abi abi)
+{
+	int i;
+	struct page **vdso_pagelist;
+	unsigned long pfn;
+
+	if (memcmp(vdso_info[abi].vdso_code_start, "\177ELF", 4)) {
+		pr_err("vDSO is not a valid ELF object!\n");
+		return -EINVAL;
+	}
+
+	vdso_info[abi].vdso_pages = (
+			vdso_info[abi].vdso_code_end -
+			vdso_info[abi].vdso_code_start) >>
+			PAGE_SHIFT;
+
+	vdso_pagelist = kcalloc(vdso_info[abi].vdso_pages,
+				sizeof(struct page *),
+				GFP_KERNEL);
+	if (vdso_pagelist == NULL)
+		return -ENOMEM;
+
+	/* Grab the vDSO code pages. */
+	pfn = sym_to_pfn(vdso_info[abi].vdso_code_start);
+
+	for (i = 0; i < vdso_info[abi].vdso_pages; i++)
+		vdso_pagelist[i] = pfn_to_page(pfn + i);
+
+	vdso_info[abi].cm->pages = vdso_pagelist;
+
+	return 0;
+}
+
+#ifdef CONFIG_TIME_NS
+struct vdso_data *arch_get_vdso_data(void *vvar_page)
+{
+	return (struct vdso_data *)(vvar_page);
+}
+
+/*
+ * The vvar mapping contains data for a specific time namespace, so when a task
+ * changes namespace we must unmap its vvar data for the old namespace.
+ * Subsequent faults will map in data for the new namespace.
+ *
+ * For more details see timens_setup_vdso_data().
+ */
+int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
+{
+	struct mm_struct *mm = task->mm;
+	struct vm_area_struct *vma;
+	VMA_ITERATOR(vmi, mm, 0);
+
+	mmap_read_lock(mm);
+
+	for_each_vma(vmi, vma) {
+		if (vma_is_special_mapping(vma, vdso_info[VDSO_ABI_AA64].dm))
+			zap_vma_pages(vma);
+#ifdef CONFIG_COMPAT_VDSO
+		if (vma_is_special_mapping(vma, vdso_info[VDSO_ABI_AA32].dm))
+			zap_vma_pages(vma);
+#endif
+	}
+
+	mmap_read_unlock(mm);
+	return 0;
+}
+#endif
+
+static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
+			     struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct page *timens_page = find_timens_vvar_page(vma);
+	unsigned long pfn;
+
+	switch (vmf->pgoff) {
+	case VVAR_DATA_PAGE_OFFSET:
+		if (timens_page)
+			pfn = page_to_pfn(timens_page);
+		else
+			pfn = sym_to_pfn(vdso_data);
+		break;
+#ifdef CONFIG_TIME_NS
+	case VVAR_TIMENS_PAGE_OFFSET:
+		/*
+		 * If a task belongs to a time namespace then a namespace
+		 * specific VVAR is mapped with the VVAR_DATA_PAGE_OFFSET and
+		 * the real VVAR page is mapped with the VVAR_TIMENS_PAGE_OFFSET
+		 * offset.
+		 * See also the comment near timens_setup_vdso_data().
+		 */
+		if (!timens_page)
+			return VM_FAULT_SIGBUS;
+		pfn = sym_to_pfn(vdso_data);
+		break;
+#endif /* CONFIG_TIME_NS */
+	default:
+		return VM_FAULT_SIGBUS;
+	}
+
+	return vmf_insert_pfn(vma, vmf->address, pfn);
+}
+
+static int __setup_additional_pages(enum vdso_abi abi,
+				    struct mm_struct *mm,
+				    struct linux_binprm *bprm,
+				    int uses_interp)
+{
+	unsigned long vdso_base, vdso_text_len, vdso_mapping_len;
+	unsigned long gp_flags = 0;
+	void *ret;
+
+	BUILD_BUG_ON(VVAR_NR_PAGES != __VVAR_PAGES);
+
+	vdso_text_len = vdso_info[abi].vdso_pages << PAGE_SHIFT;
+	/* Be sure to map the data page */
+	vdso_mapping_len = vdso_text_len + VVAR_NR_PAGES * PAGE_SIZE;
+
+	vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0);
+	if (IS_ERR_VALUE(vdso_base)) {
+		ret = ERR_PTR(vdso_base);
+		goto up_fail;
+	}
+
+	ret = _install_special_mapping(mm, vdso_base, VVAR_NR_PAGES * PAGE_SIZE,
+				       VM_READ|VM_MAYREAD|VM_PFNMAP,
+				       vdso_info[abi].dm);
+	if (IS_ERR(ret))
+		goto up_fail;
+
+	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti())
+		gp_flags = VM_ARM64_BTI;
+
+	vdso_base += VVAR_NR_PAGES * PAGE_SIZE;
+	mm->context.vdso = (void *)vdso_base;
+	ret = _install_special_mapping(mm, vdso_base, vdso_text_len,
+				       VM_READ|VM_EXEC|gp_flags|
+				       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
+				       vdso_info[abi].cm);
+	if (IS_ERR(ret))
+		goto up_fail;
+
+	return 0;
+
+up_fail:
+	mm->context.vdso = NULL;
+	return PTR_ERR(ret);
+}
+
+#ifdef CONFIG_COMPAT
+/*
+ * Create and map the vectors page for AArch32 tasks.
+ */
+enum aarch32_map {
+	AA32_MAP_VECTORS, /* kuser helpers */
+	AA32_MAP_SIGPAGE,
+	AA32_MAP_VVAR,
+	AA32_MAP_VDSO,
+};
+
+static struct page *aarch32_vectors_page __ro_after_init;
+static struct page *aarch32_sig_page __ro_after_init;
+
+static int aarch32_sigpage_mremap(const struct vm_special_mapping *sm,
+				  struct vm_area_struct *new_vma)
+{
+	current->mm->context.sigpage = (void *)new_vma->vm_start;
+
+	return 0;
+}
+
+static struct vm_special_mapping aarch32_vdso_maps[] = {
+	[AA32_MAP_VECTORS] = {
+		.name	= "[vectors]", /* ABI */
+		.pages	= &aarch32_vectors_page,
+	},
+	[AA32_MAP_SIGPAGE] = {
+		.name	= "[sigpage]", /* ABI */
+		.pages	= &aarch32_sig_page,
+		.mremap	= aarch32_sigpage_mremap,
+	},
+	[AA32_MAP_VVAR] = {
+		.name = "[vvar]",
+		.fault = vvar_fault,
+	},
+	[AA32_MAP_VDSO] = {
+		.name = "[vdso]",
+		.mremap = vdso_mremap,
+	},
+};
+
+static int aarch32_alloc_kuser_vdso_page(void)
+{
+	extern char __kuser_helper_start[], __kuser_helper_end[];
+	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+	unsigned long vdso_page;
+
+	if (!IS_ENABLED(CONFIG_KUSER_HELPERS))
+		return 0;
+
+	vdso_page = get_zeroed_page(GFP_KERNEL);
+	if (!vdso_page)
+		return -ENOMEM;
+
+	memcpy((void *)(vdso_page + 0x1000 - kuser_sz), __kuser_helper_start,
+	       kuser_sz);
+	aarch32_vectors_page = virt_to_page((void *)vdso_page);
+	return 0;
+}
+
+#define COMPAT_SIGPAGE_POISON_WORD	0xe7fddef1
+static int aarch32_alloc_sigpage(void)
+{
+	extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[];
+	int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start;
+	__le32 poison = cpu_to_le32(COMPAT_SIGPAGE_POISON_WORD);
+	void *sigpage;
+
+	sigpage = (void *)__get_free_page(GFP_KERNEL);
+	if (!sigpage)
+		return -ENOMEM;
+
+	memset32(sigpage, (__force u32)poison, PAGE_SIZE / sizeof(poison));
+	memcpy(sigpage, __aarch32_sigret_code_start, sigret_sz);
+	aarch32_sig_page = virt_to_page(sigpage);
+	return 0;
+}
+
+static int __init __aarch32_alloc_vdso_pages(void)
+{
+
+	if (!IS_ENABLED(CONFIG_COMPAT_VDSO))
+		return 0;
+
+	vdso_info[VDSO_ABI_AA32].dm = &aarch32_vdso_maps[AA32_MAP_VVAR];
+	vdso_info[VDSO_ABI_AA32].cm = &aarch32_vdso_maps[AA32_MAP_VDSO];
+
+	return __vdso_init(VDSO_ABI_AA32);
+}
+
+static int __init aarch32_alloc_vdso_pages(void)
+{
+	int ret;
+
+	ret = __aarch32_alloc_vdso_pages();
+	if (ret)
+		return ret;
+
+	ret = aarch32_alloc_sigpage();
+	if (ret)
+		return ret;
+
+	return aarch32_alloc_kuser_vdso_page();
+}
+arch_initcall(aarch32_alloc_vdso_pages);
+
+static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
+{
+	void *ret;
+
+	if (!IS_ENABLED(CONFIG_KUSER_HELPERS))
+		return 0;
+
+	/*
+	 * Avoid VM_MAYWRITE for compatibility with arch/arm/, where it's
+	 * not safe to CoW the page containing the CPU exception vectors.
+	 */
+	ret = _install_special_mapping(mm, AARCH32_VECTORS_BASE, PAGE_SIZE,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYEXEC,
+				       &aarch32_vdso_maps[AA32_MAP_VECTORS]);
+
+	return PTR_ERR_OR_ZERO(ret);
+}
+
+static int aarch32_sigreturn_setup(struct mm_struct *mm)
+{
+	unsigned long addr;
+	void *ret;
+
+	addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = ERR_PTR(addr);
+		goto out;
+	}
+
+	/*
+	 * VM_MAYWRITE is required to allow gdb to Copy-on-Write and
+	 * set breakpoints.
+	 */
+	ret = _install_special_mapping(mm, addr, PAGE_SIZE,
+				       VM_READ | VM_EXEC | VM_MAYREAD |
+				       VM_MAYWRITE | VM_MAYEXEC,
+				       &aarch32_vdso_maps[AA32_MAP_SIGPAGE]);
+	if (IS_ERR(ret))
+		goto out;
+
+	mm->context.sigpage = (void *)addr;
+
+out:
+	return PTR_ERR_OR_ZERO(ret);
+}
+
+int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	int ret;
+
+	if (mmap_write_lock_killable(mm))
+		return -EINTR;
+
+	ret = aarch32_kuser_helpers_setup(mm);
+	if (ret)
+		goto out;
+
+	if (IS_ENABLED(CONFIG_COMPAT_VDSO)) {
+		ret = __setup_additional_pages(VDSO_ABI_AA32, mm, bprm,
+					       uses_interp);
+		if (ret)
+			goto out;
+	}
+
+	ret = aarch32_sigreturn_setup(mm);
+out:
+	mmap_write_unlock(mm);
+	return ret;
+}
+#endif /* CONFIG_COMPAT */
+
+enum aarch64_map {
+	AA64_MAP_VVAR,
+	AA64_MAP_VDSO,
+};
+
+static struct vm_special_mapping aarch64_vdso_maps[] __ro_after_init = {
+	[AA64_MAP_VVAR] = {
+		.name	= "[vvar]",
+		.fault = vvar_fault,
+	},
+	[AA64_MAP_VDSO] = {
+		.name	= "[vdso]",
+		.mremap = vdso_mremap,
+	},
+};
+
+static int __init vdso_init(void)
+{
+	vdso_info[VDSO_ABI_AA64].dm = &aarch64_vdso_maps[AA64_MAP_VVAR];
+	vdso_info[VDSO_ABI_AA64].cm = &aarch64_vdso_maps[AA64_MAP_VDSO];
+
+	return __vdso_init(VDSO_ABI_AA64);
+}
+arch_initcall(vdso_init);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	int ret;
+
+	if (mmap_write_lock_killable(mm))
+		return -EINTR;
+
+	ret = __setup_additional_pages(VDSO_ABI_AA64, mm, bprm, uses_interp);
+	mmap_write_unlock(mm);
+
+	return ret;
+}
diff --git a/arch/arm64/kernel/vdso/.gitignore b/arch/arm64/kernel/vdso/.gitignore
new file mode 100644
index 000000000..652e31d82
--- /dev/null
+++ b/arch/arm64/kernel/vdso/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vdso.lds
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
new file mode 100644
index 000000000..fe7a53c67
--- /dev/null
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Building a vDSO image for AArch64.
+#
+# Author: Will Deacon <will.deacon@arm.com>
+# Heavily based on the vDSO Makefiles for other archs.
+#
+
+# Include the generic Makefile to check the built vdso.
+include $(srctree)/lib/vdso/Makefile
+
+obj-vdso := vgettimeofday.o note.o sigreturn.o
+
+# Build rules
+targets := $(obj-vdso) vdso.so vdso.so.dbg
+obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
+
+btildflags-$(CONFIG_ARM64_BTI_KERNEL) += -z force-bti
+
+# -Bsymbolic has been added for consistency with arm, the compat vDSO and
+# potential future proofing if we end up with internal calls to the exported
+# routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so
+# preparation in build-time C")).
+ldflags-y := -shared -soname=linux-vdso.so.1 --hash-style=sysv	\
+	     -Bsymbolic --build-id=sha1 -n $(btildflags-y)
+
+ifdef CONFIG_LD_ORPHAN_WARN
+  ldflags-y += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+endif
+
+ldflags-y += -T
+
+ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
+ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO
+
+# -Wmissing-prototypes and -Wmissing-declarations are removed from
+# the CFLAGS of vgettimeofday.c to make possible to build the
+# kernel with CONFIG_WERROR enabled.
+CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) \
+				$(RANDSTRUCT_CFLAGS) $(GCC_PLUGINS_CFLAGS) \
+				$(CC_FLAGS_LTO) $(CC_FLAGS_CFI) \
+				-Wmissing-prototypes -Wmissing-declarations
+KASAN_SANITIZE			:= n
+KCSAN_SANITIZE			:= n
+UBSAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+KCOV_INSTRUMENT			:= n
+
+CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -fasynchronous-unwind-tables
+
+ifneq ($(c-gettimeofday-y),)
+  CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
+endif
+
+# Disable gcov profiling for VDSO code
+GCOV_PROFILE := n
+
+targets += vdso.lds
+CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+
+# Link rule for the .so file, .lds has to be first
+$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
+	$(call if_changed,vdsold_and_vdso_check)
+
+# Strip rule for the .so file
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+      cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
+	$(call if_changed,vdsosym)
+
+# Actual build commands
+quiet_cmd_vdsold_and_vdso_check = LD      $@
+      cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check)
+
+# Install commands for the unstripped file
+quiet_cmd_vdso_install = INSTALL $@
+      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
+
+vdso.so: $(obj)/vdso.so.dbg
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso_install: vdso.so
diff --git a/arch/arm64/kernel/vdso/gen_vdso_offsets.sh b/arch/arm64/kernel/vdso/gen_vdso_offsets.sh
new file mode 100755
index 000000000..0387209d6
--- /dev/null
+++ b/arch/arm64/kernel/vdso/gen_vdso_offsets.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+#
+# Match symbols in the DSO that look like VDSO_*; produce a header file
+# of constant offsets into the shared object.
+#
+# Doing this inside the Makefile will break the $(filter-out) function,
+# causing Kbuild to rebuild the vdso-offsets header file every time.
+#
+# Author: Will Deacon <will.deacon@arm.com>
+#
+
+LC_ALL=C
+sed -n -e 's/^00*/0/' -e \
+'s/^\([0-9a-fA-F]*\) . VDSO_\([a-zA-Z0-9_]*\)$/\#define vdso_offset_\2 0x\1/p'
diff --git a/arch/arm64/kernel/vdso/note.S b/arch/arm64/kernel/vdso/note.S
new file mode 100644
index 000000000..3d4e82290
--- /dev/null
+++ b/arch/arm64/kernel/vdso/note.S
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ *
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+#include <linux/elfnote.h>
+#include <linux/build-salt.h>
+#include <asm/assembler.h>
+
+ELFNOTE_START(Linux, 0, "a")
+	.long LINUX_VERSION_CODE
+ELFNOTE_END
+
+BUILD_SALT
+
+emit_aarch64_feature_1_and
diff --git a/arch/arm64/kernel/vdso/sigreturn.S b/arch/arm64/kernel/vdso/sigreturn.S
new file mode 100644
index 000000000..0e18729ab
--- /dev/null
+++ b/arch/arm64/kernel/vdso/sigreturn.S
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Sigreturn trampoline for returning from a signal when the SA_RESTORER
+ * flag is not set. It serves primarily as a hall of shame for crappy
+ * unwinders and features an exciting but mysterious NOP instruction.
+ *
+ * It's also fragile as hell, so please think twice before changing anything
+ * in here.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/unistd.h>
+
+	.text
+
+/*
+ * NOTE!!!  You may notice that all of the .cfi directives in this file have
+ * been commented out. This is because they have been shown to trigger segfaults
+ * in libgcc when unwinding out of a SIGCANCEL handler to invoke pthread
+ * cleanup handlers during the thread cancellation dance. By omitting the
+ * directives, we trigger an arm64-specific fallback path in the unwinder which
+ * recognises the signal frame and restores many of the registers directly from
+ * the sigcontext. Re-enabling the cfi directives here therefore needs to be
+ * much more comprehensive to reduce the risk of further regressions.
+ */
+
+/* Ensure that the mysterious NOP can be associated with a function. */
+//	.cfi_startproc
+
+/*
+ * .cfi_signal_frame causes the corresponding Frame Description Entry (FDE) in
+ * the .eh_frame section to be annotated as a signal frame. This allows DWARF
+ * unwinders (e.g. libstdc++) to implement _Unwind_GetIPInfo() and identify
+ * the next frame using the unmodified return address instead of subtracting 1,
+ * which may yield the wrong FDE.
+ */
+//	.cfi_signal_frame
+
+/*
+ * Tell the unwinder where to locate the frame record linking back to the
+ * interrupted context. We don't provide unwind info for registers other than
+ * the frame pointer and the link register here; in practice, this is likely to
+ * be insufficient for unwinding in C/C++ based runtimes, especially without a
+ * means to restore the stack pointer. Thankfully, unwinders and debuggers
+ * already have baked-in strategies for attempting to unwind out of signals.
+ */
+//	.cfi_def_cfa    x29, 0
+//	.cfi_offset     x29, 0 * 8
+//	.cfi_offset     x30, 1 * 8
+
+/*
+ * This mysterious NOP is required for some unwinders (e.g. libc++) that
+ * unconditionally subtract one from the result of _Unwind_GetIP() in order to
+ * identify the calling function.
+ * Hack borrowed from arch/powerpc/kernel/vdso64/sigtramp.S.
+ */
+	nop	// Mysterious NOP
+
+/*
+ * GDB, libgcc and libunwind rely on being able to identify the sigreturn
+ * instruction sequence to unwind from signal handlers. We cannot, therefore,
+ * use SYM_FUNC_START() here, as it will emit a BTI C instruction and break the
+ * unwinder. Thankfully, this function is only ever called from a RET and so
+ * omitting the landing pad is perfectly fine.
+ */
+SYM_CODE_START(__kernel_rt_sigreturn)
+//	PLEASE DO NOT MODIFY
+	mov	x8, #__NR_rt_sigreturn
+//	PLEASE DO NOT MODIFY
+	svc	#0
+//	PLEASE DO NOT MODIFY
+//	.cfi_endproc
+SYM_CODE_END(__kernel_rt_sigreturn)
+
+emit_aarch64_feature_1_and
diff --git a/arch/arm64/kernel/vdso/vdso.lds.S b/arch/arm64/kernel/vdso/vdso.lds.S
new file mode 100644
index 000000000..45354f2dd
--- /dev/null
+++ b/arch/arm64/kernel/vdso/vdso.lds.S
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * GNU linker script for the VDSO library.
+*
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ * Heavily based on the vDSO linker scripts for other archs.
+ */
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/vdso.h>
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-bigaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+
+SECTIONS
+{
+	PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
+#ifdef CONFIG_TIME_NS
+	PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
+#endif
+	. = VDSO_LBASE + SIZEOF_HEADERS;
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	/*
+	 * Discard .note.gnu.property sections which are unused and have
+	 * different alignment requirement from vDSO note sections.
+	 */
+	/DISCARD/	: {
+		*(.note.GNU-stack .note.gnu.property)
+	}
+	.note		: { *(.note.*) }		:text	:note
+
+	. = ALIGN(16);
+
+	.text		: { *(.text*) }			:text	=0xd503201f
+	PROVIDE (__etext = .);
+	PROVIDE (_etext = .);
+	PROVIDE (etext = .);
+
+	. = ALIGN(4);
+	.altinstructions : {
+		*(.altinstructions)
+	}
+
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
+	.rela.dyn	: ALIGN(8) { *(.rela .rela*) }
+
+	.rodata		: {
+		*(.rodata*)
+		*(.got)
+		*(.got.plt)
+		*(.plt)
+		*(.plt.*)
+		*(.iplt)
+		*(.igot .igot.plt)
+	}						:text
+
+	_end = .;
+	PROVIDE(end = .);
+
+	DWARF_DEBUG
+	ELF_DETAILS
+
+	/DISCARD/	: {
+		*(.data .data.* .gnu.linkonce.d.* .sdata*)
+		*(.bss .sbss .dynbss .dynsbss)
+		*(.eh_frame .eh_frame_hdr)
+	}
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
+	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
+	note		PT_NOTE		FLAGS(4);		/* PF_R */
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+	LINUX_2.6.39 {
+	global:
+		__kernel_rt_sigreturn;
+		__kernel_gettimeofday;
+		__kernel_clock_gettime;
+		__kernel_clock_getres;
+	local: *;
+	};
+}
+
+/*
+ * Make the sigreturn code visible to the kernel.
+ */
+VDSO_sigtramp		= __kernel_rt_sigreturn;
diff --git a/arch/arm64/kernel/vdso/vgettimeofday.c b/arch/arm64/kernel/vdso/vgettimeofday.c
new file mode 100644
index 000000000..9941c5b04
--- /dev/null
+++ b/arch/arm64/kernel/vdso/vgettimeofday.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM64 userspace implementations of gettimeofday() and similar.
+ *
+ * Copyright (C) 2018 ARM Limited
+ *
+ */
+
+int __kernel_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
+int __kernel_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
+int __kernel_clock_getres(clockid_t clock_id, struct __kernel_timespec *res);
+
+int __kernel_clock_gettime(clockid_t clock,
+			   struct __kernel_timespec *ts)
+{
+	return __cvdso_clock_gettime(clock, ts);
+}
+
+int __kernel_gettimeofday(struct __kernel_old_timeval *tv,
+			  struct timezone *tz)
+{
+	return __cvdso_gettimeofday(tv, tz);
+}
+
+int __kernel_clock_getres(clockid_t clock_id,
+			  struct __kernel_timespec *res)
+{
+	return __cvdso_clock_getres(clock_id, res);
+}
diff --git a/arch/arm64/kernel/vdso32-wrap.S b/arch/arm64/kernel/vdso32-wrap.S
new file mode 100644
index 000000000..e72ac7bc4
--- /dev/null
+++ b/arch/arm64/kernel/vdso32-wrap.S
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/page.h>
+
+	.globl vdso32_start, vdso32_end
+	.section .rodata
+	.balign PAGE_SIZE
+vdso32_start:
+	.incbin "arch/arm64/kernel/vdso32/vdso.so"
+	.balign PAGE_SIZE
+vdso32_end:
+
+	.previous
diff --git a/arch/arm64/kernel/vdso32/.gitignore b/arch/arm64/kernel/vdso32/.gitignore
new file mode 100644
index 000000000..3542fa24e
--- /dev/null
+++ b/arch/arm64/kernel/vdso32/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vdso.lds
+vdso.so.raw
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
new file mode 100644
index 000000000..2f73e5bca
--- /dev/null
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for vdso32
+#
+
+include $(srctree)/lib/vdso/Makefile
+
+# Same as cc-*option, but using CC_COMPAT instead of CC
+ifeq ($(CONFIG_CC_IS_CLANG), y)
+CC_COMPAT ?= $(CC)
+CC_COMPAT += --target=arm-linux-gnueabi
+else
+CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc
+endif
+
+ifeq ($(CONFIG_LD_IS_LLD), y)
+LD_COMPAT ?= $(LD)
+else
+LD_COMPAT ?= $(CROSS_COMPILE_COMPAT)ld
+endif
+
+cc32-option = $(call try-run,\
+        $(CC_COMPAT) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
+cc32-disable-warning = $(call try-run,\
+	$(CC_COMPAT) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
+
+# We cannot use the global flags to compile the vDSO files, the main reason
+# being that the 32-bit compiler may be older than the main (64-bit) compiler
+# and therefore may not understand flags set using $(cc-option ...). Besides,
+# arch-specific options should be taken from the arm Makefile instead of the
+# arm64 one.
+# As a result we set our own flags here.
+
+# KBUILD_CPPFLAGS and NOSTDINC_FLAGS from top-level Makefile
+VDSO_CPPFLAGS := -DBUILD_VDSO -D__KERNEL__ -nostdinc
+VDSO_CPPFLAGS += -isystem $(shell $(CC_COMPAT) -print-file-name=include 2>/dev/null)
+VDSO_CPPFLAGS += $(LINUXINCLUDE)
+
+# Common C and assembly flags
+# From top-level Makefile
+VDSO_CAFLAGS := $(VDSO_CPPFLAGS)
+VDSO_CAFLAGS += $(call cc32-option,-fno-PIE)
+ifdef CONFIG_DEBUG_INFO
+VDSO_CAFLAGS += -g
+endif
+
+# From arm Makefile
+VDSO_CAFLAGS += $(call cc32-option,-fno-dwarf2-cfi-asm)
+VDSO_CAFLAGS += -mabi=aapcs-linux -mfloat-abi=soft
+ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
+VDSO_CAFLAGS += -mbig-endian
+else
+VDSO_CAFLAGS += -mlittle-endian
+endif
+
+# From arm vDSO Makefile
+VDSO_CAFLAGS += -fPIC -fno-builtin -fno-stack-protector
+VDSO_CAFLAGS += -DDISABLE_BRANCH_PROFILING
+VDSO_CAFLAGS += -march=armv8-a
+
+VDSO_CFLAGS := $(VDSO_CAFLAGS)
+VDSO_CFLAGS += -DENABLE_COMPAT_VDSO=1
+# KBUILD_CFLAGS from top-level Makefile
+VDSO_CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+               -fno-strict-aliasing -fno-common \
+               -Werror-implicit-function-declaration \
+               -Wno-format-security \
+               -std=gnu11
+VDSO_CFLAGS  += -O2
+# Some useful compiler-dependent flags from top-level Makefile
+VDSO_CFLAGS += $(call cc32-option,-Wno-pointer-sign)
+VDSO_CFLAGS += -fno-strict-overflow
+VDSO_CFLAGS += $(call cc32-option,-Werror=strict-prototypes)
+VDSO_CFLAGS += -Werror=date-time
+VDSO_CFLAGS += $(call cc32-option,-Werror=incompatible-pointer-types)
+
+# The 32-bit compiler does not provide 128-bit integers, which are used in
+# some headers that are indirectly included from the vDSO code.
+# This hack makes the compiler happy and should trigger a warning/error if
+# variables of such type are referenced.
+VDSO_CFLAGS += -D__uint128_t='void*'
+# Silence some warnings coming from headers that operate on long's
+# (on GCC 4.8 or older, there is unfortunately no way to silence this warning)
+VDSO_CFLAGS += $(call cc32-disable-warning,shift-count-overflow)
+VDSO_CFLAGS += -Wno-int-to-pointer-cast
+
+# Compile as THUMB2 or ARM. Unwinding via frame-pointers in THUMB2 is
+# unreliable.
+ifeq ($(CONFIG_THUMB2_COMPAT_VDSO), y)
+VDSO_CFLAGS += -mthumb -fomit-frame-pointer
+else
+VDSO_CFLAGS += -marm
+endif
+
+VDSO_AFLAGS := $(VDSO_CAFLAGS)
+VDSO_AFLAGS += -D__ASSEMBLY__
+
+# From arm vDSO Makefile
+VDSO_LDFLAGS += -Bsymbolic --no-undefined -soname=linux-vdso.so.1
+VDSO_LDFLAGS += -z max-page-size=4096 -z common-page-size=4096
+VDSO_LDFLAGS += -shared --hash-style=sysv --build-id=sha1
+VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+
+
+# Borrow vdsomunge.c from the arm vDSO
+# We have to use a relative path because scripts/Makefile.host prefixes
+# $(hostprogs) with $(obj)
+munge := ../../../arm/vdso/vdsomunge
+hostprogs := $(munge)
+
+c-obj-vdso := note.o
+c-obj-vdso-gettimeofday := vgettimeofday.o
+
+ifneq ($(c-gettimeofday-y),)
+VDSO_CFLAGS_gettimeofday_o += -include $(c-gettimeofday-y)
+endif
+
+VDSO_CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
+
+# Build rules
+targets := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso) vdso.so vdso.so.dbg vdso.so.raw
+c-obj-vdso := $(addprefix $(obj)/, $(c-obj-vdso))
+c-obj-vdso-gettimeofday := $(addprefix $(obj)/, $(c-obj-vdso-gettimeofday))
+asm-obj-vdso := $(addprefix $(obj)/, $(asm-obj-vdso))
+obj-vdso := $(c-obj-vdso) $(c-obj-vdso-gettimeofday) $(asm-obj-vdso)
+
+targets += vdso.lds
+CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+
+include/generated/vdso32-offsets.h: $(obj)/vdso.so.dbg FORCE
+	$(call if_changed,vdsosym)
+
+# Strip rule for vdso.so
+$(obj)/vdso.so: OBJCOPYFLAGS := -S
+$(obj)/vdso.so: $(obj)/vdso.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE
+	$(call if_changed,vdsomunge)
+
+# Link rule for the .so file, .lds has to be first
+$(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE
+	$(call if_changed,vdsold_and_vdso_check)
+
+# Compilation rules for the vDSO sources
+$(c-obj-vdso): %.o: %.c FORCE
+	$(call if_changed_dep,vdsocc)
+$(c-obj-vdso-gettimeofday): %.o: %.c FORCE
+	$(call if_changed_dep,vdsocc_gettimeofday)
+$(asm-obj-vdso): %.o: %.S FORCE
+	$(call if_changed_dep,vdsoas)
+
+# Actual build commands
+quiet_cmd_vdsold_and_vdso_check = LD32    $@
+      cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check)
+
+quiet_cmd_vdsold = LD32    $@
+      cmd_vdsold = $(LD_COMPAT) $(VDSO_LDFLAGS) \
+                   -T $(filter %.lds,$^) $(filter %.o,$^) -o $@
+quiet_cmd_vdsocc = CC32    $@
+      cmd_vdsocc = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $<
+quiet_cmd_vdsocc_gettimeofday = CC32    $@
+      cmd_vdsocc_gettimeofday = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $<
+quiet_cmd_vdsoas = AS32    $@
+      cmd_vdsoas = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $<
+
+quiet_cmd_vdsomunge = MUNGE   $@
+      cmd_vdsomunge = $(obj)/$(munge) $< $@
+
+# Generate vDSO offsets using helper script (borrowed from the 64-bit vDSO)
+gen-vdsosym := $(srctree)/$(src)/../vdso/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+# The AArch64 nm should be able to read an AArch32 binary
+      cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+# Install commands for the unstripped file
+quiet_cmd_vdso_install = INSTALL32 $@
+      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/vdso32.so
+
+vdso.so: $(obj)/vdso.so.dbg
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso_install: vdso.so
diff --git a/arch/arm64/kernel/vdso32/note.c b/arch/arm64/kernel/vdso32/note.c
new file mode 100644
index 000000000..eff5bf9ef
--- /dev/null
+++ b/arch/arm64/kernel/vdso32/note.c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012-2018 ARM Limited
+ *
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+#include <linux/elfnote.h>
+#include <linux/build-salt.h>
+
+ELFNOTE32("Linux", 0, LINUX_VERSION_CODE);
+BUILD_SALT;
diff --git a/arch/arm64/kernel/vdso32/vdso.lds.S b/arch/arm64/kernel/vdso32/vdso.lds.S
new file mode 100644
index 000000000..8d95d7d35
--- /dev/null
+++ b/arch/arm64/kernel/vdso32/vdso.lds.S
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Adapted from arm64 version.
+ *
+ * GNU linker script for the VDSO library.
+ * Heavily based on the vDSO linker scripts for other archs.
+ *
+ * Copyright (C) 2012-2018 ARM Limited
+ */
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/vdso.h>
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+
+SECTIONS
+{
+	PROVIDE_HIDDEN(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
+#ifdef CONFIG_TIME_NS
+	PROVIDE_HIDDEN(_timens_data = _vdso_data + PAGE_SIZE);
+#endif
+	. = VDSO_LBASE + SIZEOF_HEADERS;
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	.note		: { *(.note.*) }		:text	:note
+
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
+	.rodata		: {
+		*(.rodata*)
+		*(.got)
+		*(.got.plt)
+		*(.plt)
+		*(.rel.iplt)
+		*(.iplt)
+		*(.igot.plt)
+	}						:text
+
+	.text		: {
+		*(.text*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.vfp11_veneer)
+		*(.v4_bx)
+	}						:text	=0xe7f001f2
+
+	.rel.dyn	: { *(.rel*) }
+
+	.ARM.exidx : { *(.ARM.exidx*) }
+	DWARF_DEBUG
+	ELF_DETAILS
+	.ARM.attributes 0 : { *(.ARM.attributes) }
+
+	/DISCARD/	: {
+		*(.note.GNU-stack)
+		*(.data .data.* .gnu.linkonce.d.* .sdata*)
+		*(.bss .sbss .dynbss .dynsbss)
+	}
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
+	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
+	note		PT_NOTE		FLAGS(4);		/* PF_R */
+}
+
+VERSION
+{
+	LINUX_2.6 {
+	global:
+		__vdso_clock_gettime;
+		__vdso_gettimeofday;
+		__vdso_clock_getres;
+		__vdso_clock_gettime64;
+	local: *;
+	};
+}
diff --git a/arch/arm64/kernel/vdso32/vgettimeofday.c b/arch/arm64/kernel/vdso32/vgettimeofday.c
new file mode 100644
index 000000000..5acff29c5
--- /dev/null
+++ b/arch/arm64/kernel/vdso32/vgettimeofday.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM64 compat userspace implementations of gettimeofday() and similar.
+ *
+ * Copyright (C) 2018 ARM Limited
+ *
+ */
+
+int __vdso_clock_gettime(clockid_t clock,
+			 struct old_timespec32 *ts)
+{
+	return __cvdso_clock_gettime32(clock, ts);
+}
+
+int __vdso_clock_gettime64(clockid_t clock,
+			   struct __kernel_timespec *ts)
+{
+	return __cvdso_clock_gettime(clock, ts);
+}
+
+int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
+			struct timezone *tz)
+{
+	return __cvdso_gettimeofday(tv, tz);
+}
+
+int __vdso_clock_getres(clockid_t clock_id,
+			struct old_timespec32 *res)
+{
+	return __cvdso_clock_getres_time32(clock_id, res);
+}
+
+/* Avoid unresolved references emitted by GCC */
+
+void __aeabi_unwind_cpp_pr0(void)
+{
+}
+
+void __aeabi_unwind_cpp_pr1(void)
+{
+}
+
+void __aeabi_unwind_cpp_pr2(void)
+{
+}
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
new file mode 100644
index 000000000..3cd7e76cc
--- /dev/null
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -0,0 +1,388 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ld script to make ARM Linux kernel
+ * taken from the i386 version by Russell King
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ */
+
+#include <asm/hyp_image.h>
+#ifdef CONFIG_KVM
+#define HYPERVISOR_EXTABLE					\
+	. = ALIGN(SZ_8);					\
+	__start___kvm_ex_table = .;				\
+	*(__kvm_ex_table)					\
+	__stop___kvm_ex_table = .;
+
+#define HYPERVISOR_DATA_SECTIONS				\
+	HYP_SECTION_NAME(.rodata) : {				\
+		. = ALIGN(PAGE_SIZE);				\
+		__hyp_rodata_start = .;				\
+		*(HYP_SECTION_NAME(.data..ro_after_init))	\
+		*(HYP_SECTION_NAME(.rodata))			\
+		. = ALIGN(PAGE_SIZE);				\
+		__hyp_rodata_end = .;				\
+	}
+
+#define HYPERVISOR_PERCPU_SECTION				\
+	. = ALIGN(PAGE_SIZE);					\
+	HYP_SECTION_NAME(.data..percpu) : {			\
+		*(HYP_SECTION_NAME(.data..percpu))		\
+	}
+
+#define HYPERVISOR_RELOC_SECTION				\
+	.hyp.reloc : ALIGN(4) {					\
+		__hyp_reloc_begin = .;				\
+		*(.hyp.reloc)					\
+		__hyp_reloc_end = .;				\
+	}
+
+#define BSS_FIRST_SECTIONS					\
+	__hyp_bss_start = .;					\
+	*(HYP_SECTION_NAME(.bss))				\
+	. = ALIGN(PAGE_SIZE);					\
+	__hyp_bss_end = .;
+
+/*
+ * We require that __hyp_bss_start and __bss_start are aligned, and enforce it
+ * with an assertion. But the BSS_SECTION macro places an empty .sbss section
+ * between them, which can in some cases cause the linker to misalign them. To
+ * work around the issue, force a page alignment for __bss_start.
+ */
+#define SBSS_ALIGN			PAGE_SIZE
+#else /* CONFIG_KVM */
+#define HYPERVISOR_EXTABLE
+#define HYPERVISOR_DATA_SECTIONS
+#define HYPERVISOR_PERCPU_SECTION
+#define HYPERVISOR_RELOC_SECTION
+#define SBSS_ALIGN			0
+#endif
+
+#define RO_EXCEPTION_TABLE_ALIGN	4
+#define RUNTIME_DISCARD_EXIT
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/kexec.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#include "image.h"
+
+OUTPUT_ARCH(aarch64)
+ENTRY(_text)
+
+jiffies = jiffies_64;
+
+#define HYPERVISOR_TEXT					\
+	. = ALIGN(PAGE_SIZE);				\
+	__hyp_idmap_text_start = .;			\
+	*(.hyp.idmap.text)				\
+	__hyp_idmap_text_end = .;			\
+	__hyp_text_start = .;				\
+	*(.hyp.text)					\
+	HYPERVISOR_EXTABLE				\
+	. = ALIGN(PAGE_SIZE);				\
+	__hyp_text_end = .;
+
+#define IDMAP_TEXT					\
+	. = ALIGN(SZ_4K);				\
+	__idmap_text_start = .;				\
+	*(.idmap.text)					\
+	__idmap_text_end = .;
+
+#ifdef CONFIG_HIBERNATION
+#define HIBERNATE_TEXT					\
+	ALIGN_FUNCTION();				\
+	__hibernate_exit_text_start = .;		\
+	*(.hibernate_exit.text)				\
+	__hibernate_exit_text_end = .;
+#else
+#define HIBERNATE_TEXT
+#endif
+
+#ifdef CONFIG_KEXEC_CORE
+#define KEXEC_TEXT					\
+	ALIGN_FUNCTION();				\
+	__relocate_new_kernel_start = .;		\
+	*(.kexec_relocate.text)				\
+	__relocate_new_kernel_end = .;
+#else
+#define KEXEC_TEXT
+#endif
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+#define TRAMP_TEXT					\
+	. = ALIGN(PAGE_SIZE);				\
+	__entry_tramp_text_start = .;			\
+	*(.entry.tramp.text)				\
+	. = ALIGN(PAGE_SIZE);				\
+	__entry_tramp_text_end = .;			\
+	*(.entry.tramp.rodata)
+#else
+#define TRAMP_TEXT
+#endif
+
+#ifdef CONFIG_UNWIND_TABLES
+#define UNWIND_DATA_SECTIONS				\
+	.eh_frame : {					\
+		__eh_frame_start = .;			\
+		*(.eh_frame)				\
+		__eh_frame_end = .;			\
+	}
+#else
+#define UNWIND_DATA_SECTIONS
+#endif
+
+/*
+ * The size of the PE/COFF section that covers the kernel image, which
+ * runs from _stext to _edata, must be a round multiple of the PE/COFF
+ * FileAlignment, which we set to its minimum value of 0x200. '_stext'
+ * itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
+ * boundary should be sufficient.
+ */
+PECOFF_FILE_ALIGNMENT = 0x200;
+
+#ifdef CONFIG_EFI
+#define PECOFF_EDATA_PADDING	\
+	.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
+#else
+#define PECOFF_EDATA_PADDING
+#endif
+
+SECTIONS
+{
+	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 */
+	DISCARDS
+	/DISCARD/ : {
+		*(.interp .dynamic)
+		*(.dynsym .dynstr .hash .gnu.hash)
+	}
+
+	. = KIMAGE_VADDR;
+
+	.head.text : {
+		_text = .;
+		HEAD_TEXT
+	}
+	.text : ALIGN(SEGMENT_ALIGN) {	/* Real text segment		*/
+		_stext = .;		/* Text and read-only data	*/
+			IRQENTRY_TEXT
+			SOFTIRQENTRY_TEXT
+			ENTRY_TEXT
+			TEXT_TEXT
+			SCHED_TEXT
+			LOCK_TEXT
+			KPROBES_TEXT
+			HYPERVISOR_TEXT
+			*(.gnu.warning)
+	}
+
+	. = ALIGN(SEGMENT_ALIGN);
+	_etext = .;			/* End of text section */
+
+	/* everything from this point to __init_begin will be marked RO NX */
+	RO_DATA(PAGE_SIZE)
+
+	HYPERVISOR_DATA_SECTIONS
+
+	.got : { *(.got) }
+	/*
+	 * Make sure that the .got.plt is either completely empty or it
+	 * contains only the lazy dispatch entries.
+	 */
+	.got.plt : { *(.got.plt) }
+	ASSERT(SIZEOF(.got.plt) == 0 || SIZEOF(.got.plt) == 0x18,
+	       "Unexpected GOT/PLT entries detected!")
+
+	/* code sections that are never executed via the kernel mapping */
+	.rodata.text : {
+		TRAMP_TEXT
+		HIBERNATE_TEXT
+		KEXEC_TEXT
+		IDMAP_TEXT
+		. = ALIGN(PAGE_SIZE);
+	}
+
+	idmap_pg_dir = .;
+	. += PAGE_SIZE;
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	tramp_pg_dir = .;
+	. += PAGE_SIZE;
+#endif
+
+	reserved_pg_dir = .;
+	. += PAGE_SIZE;
+
+	swapper_pg_dir = .;
+	. += PAGE_SIZE;
+
+	. = ALIGN(SEGMENT_ALIGN);
+	__init_begin = .;
+	__inittext_begin = .;
+
+	INIT_TEXT_SECTION(8)
+
+	__exittext_begin = .;
+	.exit.text : {
+		EXIT_TEXT
+	}
+	__exittext_end = .;
+
+	. = ALIGN(4);
+	.altinstructions : {
+		__alt_instructions = .;
+		*(.altinstructions)
+		__alt_instructions_end = .;
+	}
+
+	UNWIND_DATA_SECTIONS
+
+	. = ALIGN(SEGMENT_ALIGN);
+	__inittext_end = .;
+	__initdata_begin = .;
+
+	init_idmap_pg_dir = .;
+	. += INIT_IDMAP_DIR_SIZE;
+	init_idmap_pg_end = .;
+
+	.init.data : {
+		INIT_DATA
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		INIT_RAM_FS
+		*(.init.altinstructions .init.bss)	/* from the EFI stub */
+	}
+	.exit.data : {
+		EXIT_DATA
+	}
+
+	PERCPU_SECTION(L1_CACHE_BYTES)
+	HYPERVISOR_PERCPU_SECTION
+
+	HYPERVISOR_RELOC_SECTION
+
+	.rela.dyn : ALIGN(8) {
+		__rela_start = .;
+		*(.rela .rela*)
+		__rela_end = .;
+	}
+
+	.relr.dyn : ALIGN(8) {
+		__relr_start = .;
+		*(.relr.dyn)
+		__relr_end = .;
+	}
+
+	. = ALIGN(SEGMENT_ALIGN);
+	__initdata_end = .;
+	__init_end = .;
+
+	_data = .;
+	_sdata = .;
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
+
+	/*
+	 * Data written with the MMU off but read with the MMU on requires
+	 * cache lines to be invalidated, discarding up to a Cache Writeback
+	 * Granule (CWG) of data from the cache. Keep the section that
+	 * requires this type of maintenance to be in its own Cache Writeback
+	 * Granule (CWG) area so the cache maintenance operations don't
+	 * interfere with adjacent data.
+	 */
+	.mmuoff.data.write : ALIGN(SZ_2K) {
+		__mmuoff_data_start = .;
+		*(.mmuoff.data.write)
+	}
+	. = ALIGN(SZ_2K);
+	.mmuoff.data.read : {
+		*(.mmuoff.data.read)
+		__mmuoff_data_end = .;
+	}
+
+	PECOFF_EDATA_PADDING
+	__pecoff_data_rawsize = ABSOLUTE(. - __initdata_begin);
+	_edata = .;
+
+	BSS_SECTION(SBSS_ALIGN, 0, 0)
+
+	. = ALIGN(PAGE_SIZE);
+	init_pg_dir = .;
+	. += INIT_DIR_SIZE;
+	init_pg_end = .;
+
+	. = ALIGN(SEGMENT_ALIGN);
+	__pecoff_data_size = ABSOLUTE(. - __initdata_begin);
+	_end = .;
+
+	STABS_DEBUG
+	DWARF_DEBUG
+	ELF_DETAILS
+
+	HEAD_SYMBOLS
+
+	/*
+	 * Sections that should stay zero sized, which is safer to
+	 * explicitly check instead of blindly discarding.
+	 */
+	.plt : {
+		*(.plt) *(.plt.*) *(.iplt) *(.igot .igot.plt)
+	}
+	ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!")
+
+	.data.rel.ro : { *(.data.rel.ro) }
+	ASSERT(SIZEOF(.data.rel.ro) == 0, "Unexpected RELRO detected!")
+}
+
+#include "image-vars.h"
+
+/*
+ * The HYP init code and ID map text can't be longer than a page each. The
+ * former is page-aligned, but the latter may not be with 16K or 64K pages, so
+ * it should also not cross a page boundary.
+ */
+ASSERT(__hyp_idmap_text_end - __hyp_idmap_text_start <= PAGE_SIZE,
+	"HYP init code too big")
+ASSERT(__idmap_text_end - (__idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
+	"ID map text too big or misaligned")
+#ifdef CONFIG_HIBERNATION
+ASSERT(__hibernate_exit_text_end - __hibernate_exit_text_start <= SZ_4K,
+       "Hibernate exit text is bigger than 4 KiB")
+ASSERT(__hibernate_exit_text_start == swsusp_arch_suspend_exit,
+       "Hibernate exit text does not start with swsusp_arch_suspend_exit")
+#endif
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) <= 3*PAGE_SIZE,
+	"Entry trampoline text too big")
+#endif
+#ifdef CONFIG_KVM
+ASSERT(__hyp_bss_start == __bss_start, "HYP and Host BSS are misaligned")
+#endif
+/*
+ * If padding is applied before .head.text, virt<->phys conversions will fail.
+ */
+ASSERT(_text == KIMAGE_VADDR, "HEAD is misaligned")
+
+ASSERT(swapper_pg_dir - reserved_pg_dir == RESERVED_SWAPPER_OFFSET,
+       "RESERVED_SWAPPER_OFFSET is wrong!")
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+ASSERT(swapper_pg_dir - tramp_pg_dir == TRAMP_SWAPPER_OFFSET,
+       "TRAMP_SWAPPER_OFFSET is wrong!")
+#endif
+
+#ifdef CONFIG_KEXEC_CORE
+/* kexec relocation code should fit into one KEXEC_CONTROL_PAGE_SIZE */
+ASSERT(__relocate_new_kernel_end - __relocate_new_kernel_start <= SZ_4K,
+       "kexec relocation code is bigger than 4 KiB")
+ASSERT(KEXEC_CONTROL_PAGE_SIZE >= SZ_4K, "KEXEC_CONTROL_PAGE_SIZE is broken")
+ASSERT(__relocate_new_kernel_start == arm64_relocate_new_kernel,
+       "kexec control page does not start with arm64_relocate_new_kernel")
+#endif
diff --git a/arch/arm64/kernel/watchdog_hld.c b/arch/arm64/kernel/watchdog_hld.c
new file mode 100644
index 000000000..dcd253221
--- /dev/null
+++ b/arch/arm64/kernel/watchdog_hld.c
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/nmi.h>
+#include <linux/cpufreq.h>
+#include <linux/perf/arm_pmu.h>
+
+/*
+ * Safe maximum CPU frequency in case a particular platform doesn't implement
+ * cpufreq driver. Although, architecture doesn't put any restrictions on
+ * maximum frequency but 5 GHz seems to be safe maximum given the available
+ * Arm CPUs in the market which are clocked much less than 5 GHz. On the other
+ * hand, we can't make it much higher as it would lead to a large hard-lockup
+ * detection timeout on parts which are running slower (eg. 1GHz on
+ * Developerbox) and doesn't possess a cpufreq driver.
+ */
+#define SAFE_MAX_CPU_FREQ	5000000000UL // 5 GHz
+u64 hw_nmi_get_sample_period(int watchdog_thresh)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned long max_cpu_freq;
+
+	max_cpu_freq = cpufreq_get_hw_max_freq(cpu) * 1000UL;
+	if (!max_cpu_freq)
+		max_cpu_freq = SAFE_MAX_CPU_FREQ;
+
+	return (u64)max_cpu_freq * watchdog_thresh;
+}
+
+bool __init arch_perf_nmi_is_available(void)
+{
+	/*
+	 * hardlockup_detector_perf_init() will success even if Pseudo-NMI turns off,
+	 * however, the pmu interrupts will act like a normal interrupt instead of
+	 * NMI and the hardlockup detector would be broken.
+	 */
+	return arm_pmu_irq_is_nmi();
+}
diff --git a/arch/arm64/kvm/.gitignore b/arch/arm64/kvm/.gitignore
new file mode 100644
index 000000000..6182aefb8
--- /dev/null
+++ b/arch/arm64/kvm/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+hyp_constants.h
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
new file mode 100644
index 000000000..83c1e09be
--- /dev/null
+++ b/arch/arm64/kvm/Kconfig
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# KVM configuration
+#
+
+source "virt/lib/Kconfig"
+source "virt/kvm/Kconfig"
+
+menuconfig VIRTUALIZATION
+	bool "Virtualization"
+	help
+	  Say Y here to get to see options for using your Linux host to run
+	  other operating systems inside virtual machines (guests).
+	  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and
+	  disabled.
+
+if VIRTUALIZATION
+
+menuconfig KVM
+	bool "Kernel-based Virtual Machine (KVM) support"
+	depends on HAVE_KVM
+	select KVM_GENERIC_HARDWARE_ENABLING
+	select MMU_NOTIFIER
+	select PREEMPT_NOTIFIERS
+	select HAVE_KVM_CPU_RELAX_INTERCEPT
+	select KVM_MMIO
+	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
+	select KVM_XFER_TO_GUEST_WORK
+	select KVM_VFIO
+	select HAVE_KVM_EVENTFD
+	select HAVE_KVM_IRQFD
+	select HAVE_KVM_DIRTY_RING_ACQ_REL
+	select NEED_KVM_DIRTY_RING_WITH_BITMAP
+	select HAVE_KVM_MSI
+	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_IRQ_ROUTING
+	select IRQ_BYPASS_MANAGER
+	select HAVE_KVM_IRQ_BYPASS
+	select HAVE_KVM_VCPU_RUN_PID_CHANGE
+	select SCHED_INFO
+	select GUEST_PERF_EVENTS if PERF_EVENTS
+	select INTERVAL_TREE
+	select XARRAY_MULTI
+	help
+	  Support hosting virtualized guest machines.
+
+	  If unsure, say N.
+
+config NVHE_EL2_DEBUG
+	bool "Debug mode for non-VHE EL2 object"
+	depends on KVM
+	help
+	  Say Y here to enable the debug mode for the non-VHE KVM EL2 object.
+	  Failure reports will BUG() in the hypervisor. This is intended for
+	  local EL2 hypervisor development.
+
+	  If unsure, say N.
+
+config PROTECTED_NVHE_STACKTRACE
+	bool "Protected KVM hypervisor stacktraces"
+	depends on NVHE_EL2_DEBUG
+	default n
+	help
+	  Say Y here to enable pKVM hypervisor stacktraces on hyp_panic()
+
+	  If using protected nVHE mode, but cannot afford the associated
+	  memory cost (less than 0.75 page per CPU) of pKVM stacktraces,
+	  say N.
+
+	  If unsure, or not using protected nVHE (pKVM), say N.
+
+endif # VIRTUALIZATION
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
new file mode 100644
index 000000000..c0c050e53
--- /dev/null
+++ b/arch/arm64/kvm/Makefile
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Kernel-based Virtual Machine module
+#
+
+ccflags-y += -I $(srctree)/$(src)
+
+include $(srctree)/virt/kvm/Makefile.kvm
+
+obj-$(CONFIG_KVM) += kvm.o
+obj-$(CONFIG_KVM) += hyp/
+
+kvm-y += arm.o mmu.o mmio.o psci.o hypercalls.o pvtime.o \
+	 inject_fault.o va_layout.o handle_exit.o \
+	 guest.o debug.o reset.o sys_regs.o stacktrace.o \
+	 vgic-sys-reg-v3.o fpsimd.o pkvm.o \
+	 arch_timer.o trng.o vmid.o emulate-nested.o nested.o \
+	 vgic/vgic.o vgic/vgic-init.o \
+	 vgic/vgic-irqfd.o vgic/vgic-v2.o \
+	 vgic/vgic-v3.o vgic/vgic-v4.o \
+	 vgic/vgic-mmio.o vgic/vgic-mmio-v2.o \
+	 vgic/vgic-mmio-v3.o vgic/vgic-kvm-device.o \
+	 vgic/vgic-its.o vgic/vgic-debug.o
+
+kvm-$(CONFIG_HW_PERF_EVENTS)  += pmu-emul.o pmu.o
+
+always-y := hyp_constants.h hyp-constants.s
+
+define rule_gen_hyp_constants
+	$(call filechk,offsets,__HYP_CONSTANTS_H__)
+endef
+
+CFLAGS_hyp-constants.o = -I $(srctree)/$(src)/hyp/include
+$(obj)/hyp-constants.s: $(src)/hyp/hyp-constants.c FORCE
+	$(call if_changed_dep,cc_s_c)
+
+$(obj)/hyp_constants.h: $(obj)/hyp-constants.s FORCE
+	$(call if_changed_rule,gen_hyp_constants)
+
+obj-kvm := $(addprefix $(obj)/, $(kvm-y))
+$(obj-kvm): $(obj)/hyp_constants.h
diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
new file mode 100644
index 000000000..a1e24228a
--- /dev/null
+++ b/arch/arm64/kvm/arch_timer.c
@@ -0,0 +1,1684 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/cpu.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/uaccess.h>
+
+#include <clocksource/arm_arch_timer.h>
+#include <asm/arch_timer.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_nested.h>
+
+#include <kvm/arm_vgic.h>
+#include <kvm/arm_arch_timer.h>
+
+#include "trace.h"
+
+static struct timecounter *timecounter;
+static unsigned int host_vtimer_irq;
+static unsigned int host_ptimer_irq;
+static u32 host_vtimer_irq_flags;
+static u32 host_ptimer_irq_flags;
+
+static DEFINE_STATIC_KEY_FALSE(has_gic_active_state);
+
+static const u8 default_ppi[] = {
+	[TIMER_PTIMER]  = 30,
+	[TIMER_VTIMER]  = 27,
+	[TIMER_HPTIMER] = 26,
+	[TIMER_HVTIMER] = 28,
+};
+
+static bool kvm_timer_irq_can_fire(struct arch_timer_context *timer_ctx);
+static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
+				 struct arch_timer_context *timer_ctx);
+static bool kvm_timer_should_fire(struct arch_timer_context *timer_ctx);
+static void kvm_arm_timer_write(struct kvm_vcpu *vcpu,
+				struct arch_timer_context *timer,
+				enum kvm_arch_timer_regs treg,
+				u64 val);
+static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu,
+			      struct arch_timer_context *timer,
+			      enum kvm_arch_timer_regs treg);
+static bool kvm_arch_timer_get_input_level(int vintid);
+
+static struct irq_ops arch_timer_irq_ops = {
+	.get_input_level = kvm_arch_timer_get_input_level,
+};
+
+static int nr_timers(struct kvm_vcpu *vcpu)
+{
+	if (!vcpu_has_nv(vcpu))
+		return NR_KVM_EL0_TIMERS;
+
+	return NR_KVM_TIMERS;
+}
+
+u32 timer_get_ctl(struct arch_timer_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt->vcpu;
+
+	switch(arch_timer_ctx_index(ctxt)) {
+	case TIMER_VTIMER:
+		return __vcpu_sys_reg(vcpu, CNTV_CTL_EL0);
+	case TIMER_PTIMER:
+		return __vcpu_sys_reg(vcpu, CNTP_CTL_EL0);
+	case TIMER_HVTIMER:
+		return __vcpu_sys_reg(vcpu, CNTHV_CTL_EL2);
+	case TIMER_HPTIMER:
+		return __vcpu_sys_reg(vcpu, CNTHP_CTL_EL2);
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+}
+
+u64 timer_get_cval(struct arch_timer_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt->vcpu;
+
+	switch(arch_timer_ctx_index(ctxt)) {
+	case TIMER_VTIMER:
+		return __vcpu_sys_reg(vcpu, CNTV_CVAL_EL0);
+	case TIMER_PTIMER:
+		return __vcpu_sys_reg(vcpu, CNTP_CVAL_EL0);
+	case TIMER_HVTIMER:
+		return __vcpu_sys_reg(vcpu, CNTHV_CVAL_EL2);
+	case TIMER_HPTIMER:
+		return __vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2);
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+}
+
+static u64 timer_get_offset(struct arch_timer_context *ctxt)
+{
+	u64 offset = 0;
+
+	if (!ctxt)
+		return 0;
+
+	if (ctxt->offset.vm_offset)
+		offset += *ctxt->offset.vm_offset;
+	if (ctxt->offset.vcpu_offset)
+		offset += *ctxt->offset.vcpu_offset;
+
+	return offset;
+}
+
+static void timer_set_ctl(struct arch_timer_context *ctxt, u32 ctl)
+{
+	struct kvm_vcpu *vcpu = ctxt->vcpu;
+
+	switch(arch_timer_ctx_index(ctxt)) {
+	case TIMER_VTIMER:
+		__vcpu_sys_reg(vcpu, CNTV_CTL_EL0) = ctl;
+		break;
+	case TIMER_PTIMER:
+		__vcpu_sys_reg(vcpu, CNTP_CTL_EL0) = ctl;
+		break;
+	case TIMER_HVTIMER:
+		__vcpu_sys_reg(vcpu, CNTHV_CTL_EL2) = ctl;
+		break;
+	case TIMER_HPTIMER:
+		__vcpu_sys_reg(vcpu, CNTHP_CTL_EL2) = ctl;
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+static void timer_set_cval(struct arch_timer_context *ctxt, u64 cval)
+{
+	struct kvm_vcpu *vcpu = ctxt->vcpu;
+
+	switch(arch_timer_ctx_index(ctxt)) {
+	case TIMER_VTIMER:
+		__vcpu_sys_reg(vcpu, CNTV_CVAL_EL0) = cval;
+		break;
+	case TIMER_PTIMER:
+		__vcpu_sys_reg(vcpu, CNTP_CVAL_EL0) = cval;
+		break;
+	case TIMER_HVTIMER:
+		__vcpu_sys_reg(vcpu, CNTHV_CVAL_EL2) = cval;
+		break;
+	case TIMER_HPTIMER:
+		__vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2) = cval;
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+static void timer_set_offset(struct arch_timer_context *ctxt, u64 offset)
+{
+	if (!ctxt->offset.vm_offset) {
+		WARN(offset, "timer %ld\n", arch_timer_ctx_index(ctxt));
+		return;
+	}
+
+	WRITE_ONCE(*ctxt->offset.vm_offset, offset);
+}
+
+u64 kvm_phys_timer_read(void)
+{
+	return timecounter->cc->read(timecounter->cc);
+}
+
+void get_timer_map(struct kvm_vcpu *vcpu, struct timer_map *map)
+{
+	if (vcpu_has_nv(vcpu)) {
+		if (is_hyp_ctxt(vcpu)) {
+			map->direct_vtimer = vcpu_hvtimer(vcpu);
+			map->direct_ptimer = vcpu_hptimer(vcpu);
+			map->emul_vtimer = vcpu_vtimer(vcpu);
+			map->emul_ptimer = vcpu_ptimer(vcpu);
+		} else {
+			map->direct_vtimer = vcpu_vtimer(vcpu);
+			map->direct_ptimer = vcpu_ptimer(vcpu);
+			map->emul_vtimer = vcpu_hvtimer(vcpu);
+			map->emul_ptimer = vcpu_hptimer(vcpu);
+		}
+	} else if (has_vhe()) {
+		map->direct_vtimer = vcpu_vtimer(vcpu);
+		map->direct_ptimer = vcpu_ptimer(vcpu);
+		map->emul_vtimer = NULL;
+		map->emul_ptimer = NULL;
+	} else {
+		map->direct_vtimer = vcpu_vtimer(vcpu);
+		map->direct_ptimer = NULL;
+		map->emul_vtimer = NULL;
+		map->emul_ptimer = vcpu_ptimer(vcpu);
+	}
+
+	trace_kvm_get_timer_map(vcpu->vcpu_id, map);
+}
+
+static inline bool userspace_irqchip(struct kvm *kvm)
+{
+	return static_branch_unlikely(&userspace_irqchip_in_use) &&
+		unlikely(!irqchip_in_kernel(kvm));
+}
+
+static void soft_timer_start(struct hrtimer *hrt, u64 ns)
+{
+	hrtimer_start(hrt, ktime_add_ns(ktime_get(), ns),
+		      HRTIMER_MODE_ABS_HARD);
+}
+
+static void soft_timer_cancel(struct hrtimer *hrt)
+{
+	hrtimer_cancel(hrt);
+}
+
+static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id)
+{
+	struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id;
+	struct arch_timer_context *ctx;
+	struct timer_map map;
+
+	/*
+	 * We may see a timer interrupt after vcpu_put() has been called which
+	 * sets the CPU's vcpu pointer to NULL, because even though the timer
+	 * has been disabled in timer_save_state(), the hardware interrupt
+	 * signal may not have been retired from the interrupt controller yet.
+	 */
+	if (!vcpu)
+		return IRQ_HANDLED;
+
+	get_timer_map(vcpu, &map);
+
+	if (irq == host_vtimer_irq)
+		ctx = map.direct_vtimer;
+	else
+		ctx = map.direct_ptimer;
+
+	if (kvm_timer_should_fire(ctx))
+		kvm_timer_update_irq(vcpu, true, ctx);
+
+	if (userspace_irqchip(vcpu->kvm) &&
+	    !static_branch_unlikely(&has_gic_active_state))
+		disable_percpu_irq(host_vtimer_irq);
+
+	return IRQ_HANDLED;
+}
+
+static u64 kvm_counter_compute_delta(struct arch_timer_context *timer_ctx,
+				     u64 val)
+{
+	u64 now = kvm_phys_timer_read() - timer_get_offset(timer_ctx);
+
+	if (now < val) {
+		u64 ns;
+
+		ns = cyclecounter_cyc2ns(timecounter->cc,
+					 val - now,
+					 timecounter->mask,
+					 &timer_ctx->ns_frac);
+		return ns;
+	}
+
+	return 0;
+}
+
+static u64 kvm_timer_compute_delta(struct arch_timer_context *timer_ctx)
+{
+	return kvm_counter_compute_delta(timer_ctx, timer_get_cval(timer_ctx));
+}
+
+static bool kvm_timer_irq_can_fire(struct arch_timer_context *timer_ctx)
+{
+	WARN_ON(timer_ctx && timer_ctx->loaded);
+	return timer_ctx &&
+		((timer_get_ctl(timer_ctx) &
+		  (ARCH_TIMER_CTRL_IT_MASK | ARCH_TIMER_CTRL_ENABLE)) == ARCH_TIMER_CTRL_ENABLE);
+}
+
+static bool vcpu_has_wfit_active(struct kvm_vcpu *vcpu)
+{
+	return (cpus_have_final_cap(ARM64_HAS_WFXT) &&
+		vcpu_get_flag(vcpu, IN_WFIT));
+}
+
+static u64 wfit_delay_ns(struct kvm_vcpu *vcpu)
+{
+	u64 val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu));
+	struct arch_timer_context *ctx;
+
+	ctx = (vcpu_has_nv(vcpu) && is_hyp_ctxt(vcpu)) ? vcpu_hvtimer(vcpu)
+						       : vcpu_vtimer(vcpu);
+
+	return kvm_counter_compute_delta(ctx, val);
+}
+
+/*
+ * Returns the earliest expiration time in ns among guest timers.
+ * Note that it will return 0 if none of timers can fire.
+ */
+static u64 kvm_timer_earliest_exp(struct kvm_vcpu *vcpu)
+{
+	u64 min_delta = ULLONG_MAX;
+	int i;
+
+	for (i = 0; i < nr_timers(vcpu); i++) {
+		struct arch_timer_context *ctx = &vcpu->arch.timer_cpu.timers[i];
+
+		WARN(ctx->loaded, "timer %d loaded\n", i);
+		if (kvm_timer_irq_can_fire(ctx))
+			min_delta = min(min_delta, kvm_timer_compute_delta(ctx));
+	}
+
+	if (vcpu_has_wfit_active(vcpu))
+		min_delta = min(min_delta, wfit_delay_ns(vcpu));
+
+	/* If none of timers can fire, then return 0 */
+	if (min_delta == ULLONG_MAX)
+		return 0;
+
+	return min_delta;
+}
+
+static enum hrtimer_restart kvm_bg_timer_expire(struct hrtimer *hrt)
+{
+	struct arch_timer_cpu *timer;
+	struct kvm_vcpu *vcpu;
+	u64 ns;
+
+	timer = container_of(hrt, struct arch_timer_cpu, bg_timer);
+	vcpu = container_of(timer, struct kvm_vcpu, arch.timer_cpu);
+
+	/*
+	 * Check that the timer has really expired from the guest's
+	 * PoV (NTP on the host may have forced it to expire
+	 * early). If we should have slept longer, restart it.
+	 */
+	ns = kvm_timer_earliest_exp(vcpu);
+	if (unlikely(ns)) {
+		hrtimer_forward_now(hrt, ns_to_ktime(ns));
+		return HRTIMER_RESTART;
+	}
+
+	kvm_vcpu_wake_up(vcpu);
+	return HRTIMER_NORESTART;
+}
+
+static enum hrtimer_restart kvm_hrtimer_expire(struct hrtimer *hrt)
+{
+	struct arch_timer_context *ctx;
+	struct kvm_vcpu *vcpu;
+	u64 ns;
+
+	ctx = container_of(hrt, struct arch_timer_context, hrtimer);
+	vcpu = ctx->vcpu;
+
+	trace_kvm_timer_hrtimer_expire(ctx);
+
+	/*
+	 * Check that the timer has really expired from the guest's
+	 * PoV (NTP on the host may have forced it to expire
+	 * early). If not ready, schedule for a later time.
+	 */
+	ns = kvm_timer_compute_delta(ctx);
+	if (unlikely(ns)) {
+		hrtimer_forward_now(hrt, ns_to_ktime(ns));
+		return HRTIMER_RESTART;
+	}
+
+	kvm_timer_update_irq(vcpu, true, ctx);
+	return HRTIMER_NORESTART;
+}
+
+static bool kvm_timer_should_fire(struct arch_timer_context *timer_ctx)
+{
+	enum kvm_arch_timers index;
+	u64 cval, now;
+
+	if (!timer_ctx)
+		return false;
+
+	index = arch_timer_ctx_index(timer_ctx);
+
+	if (timer_ctx->loaded) {
+		u32 cnt_ctl = 0;
+
+		switch (index) {
+		case TIMER_VTIMER:
+		case TIMER_HVTIMER:
+			cnt_ctl = read_sysreg_el0(SYS_CNTV_CTL);
+			break;
+		case TIMER_PTIMER:
+		case TIMER_HPTIMER:
+			cnt_ctl = read_sysreg_el0(SYS_CNTP_CTL);
+			break;
+		case NR_KVM_TIMERS:
+			/* GCC is braindead */
+			cnt_ctl = 0;
+			break;
+		}
+
+		return  (cnt_ctl & ARCH_TIMER_CTRL_ENABLE) &&
+		        (cnt_ctl & ARCH_TIMER_CTRL_IT_STAT) &&
+		       !(cnt_ctl & ARCH_TIMER_CTRL_IT_MASK);
+	}
+
+	if (!kvm_timer_irq_can_fire(timer_ctx))
+		return false;
+
+	cval = timer_get_cval(timer_ctx);
+	now = kvm_phys_timer_read() - timer_get_offset(timer_ctx);
+
+	return cval <= now;
+}
+
+int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
+{
+	return vcpu_has_wfit_active(vcpu) && wfit_delay_ns(vcpu) == 0;
+}
+
+/*
+ * Reflect the timer output level into the kvm_run structure
+ */
+void kvm_timer_update_run(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
+	struct arch_timer_context *ptimer = vcpu_ptimer(vcpu);
+	struct kvm_sync_regs *regs = &vcpu->run->s.regs;
+
+	/* Populate the device bitmap with the timer states */
+	regs->device_irq_level &= ~(KVM_ARM_DEV_EL1_VTIMER |
+				    KVM_ARM_DEV_EL1_PTIMER);
+	if (kvm_timer_should_fire(vtimer))
+		regs->device_irq_level |= KVM_ARM_DEV_EL1_VTIMER;
+	if (kvm_timer_should_fire(ptimer))
+		regs->device_irq_level |= KVM_ARM_DEV_EL1_PTIMER;
+}
+
+static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
+				 struct arch_timer_context *timer_ctx)
+{
+	int ret;
+
+	timer_ctx->irq.level = new_level;
+	trace_kvm_timer_update_irq(vcpu->vcpu_id, timer_irq(timer_ctx),
+				   timer_ctx->irq.level);
+
+	if (!userspace_irqchip(vcpu->kvm)) {
+		ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
+					  timer_irq(timer_ctx),
+					  timer_ctx->irq.level,
+					  timer_ctx);
+		WARN_ON(ret);
+	}
+}
+
+/* Only called for a fully emulated timer */
+static void timer_emulate(struct arch_timer_context *ctx)
+{
+	bool should_fire = kvm_timer_should_fire(ctx);
+
+	trace_kvm_timer_emulate(ctx, should_fire);
+
+	if (should_fire != ctx->irq.level) {
+		kvm_timer_update_irq(ctx->vcpu, should_fire, ctx);
+		return;
+	}
+
+	/*
+	 * If the timer can fire now, we don't need to have a soft timer
+	 * scheduled for the future.  If the timer cannot fire at all,
+	 * then we also don't need a soft timer.
+	 */
+	if (should_fire || !kvm_timer_irq_can_fire(ctx))
+		return;
+
+	soft_timer_start(&ctx->hrtimer, kvm_timer_compute_delta(ctx));
+}
+
+static void set_cntvoff(u64 cntvoff)
+{
+	kvm_call_hyp(__kvm_timer_set_cntvoff, cntvoff);
+}
+
+static void set_cntpoff(u64 cntpoff)
+{
+	if (has_cntpoff())
+		write_sysreg_s(cntpoff, SYS_CNTPOFF_EL2);
+}
+
+static void timer_save_state(struct arch_timer_context *ctx)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(ctx->vcpu);
+	enum kvm_arch_timers index = arch_timer_ctx_index(ctx);
+	unsigned long flags;
+
+	if (!timer->enabled)
+		return;
+
+	local_irq_save(flags);
+
+	if (!ctx->loaded)
+		goto out;
+
+	switch (index) {
+		u64 cval;
+
+	case TIMER_VTIMER:
+	case TIMER_HVTIMER:
+		timer_set_ctl(ctx, read_sysreg_el0(SYS_CNTV_CTL));
+		timer_set_cval(ctx, read_sysreg_el0(SYS_CNTV_CVAL));
+
+		/* Disable the timer */
+		write_sysreg_el0(0, SYS_CNTV_CTL);
+		isb();
+
+		/*
+		 * The kernel may decide to run userspace after
+		 * calling vcpu_put, so we reset cntvoff to 0 to
+		 * ensure a consistent read between user accesses to
+		 * the virtual counter and kernel access to the
+		 * physical counter of non-VHE case.
+		 *
+		 * For VHE, the virtual counter uses a fixed virtual
+		 * offset of zero, so no need to zero CNTVOFF_EL2
+		 * register, but this is actually useful when switching
+		 * between EL1/vEL2 with NV.
+		 *
+		 * Do it unconditionally, as this is either unavoidable
+		 * or dirt cheap.
+		 */
+		set_cntvoff(0);
+		break;
+	case TIMER_PTIMER:
+	case TIMER_HPTIMER:
+		timer_set_ctl(ctx, read_sysreg_el0(SYS_CNTP_CTL));
+		cval = read_sysreg_el0(SYS_CNTP_CVAL);
+
+		cval -= timer_get_offset(ctx);
+
+		timer_set_cval(ctx, cval);
+
+		/* Disable the timer */
+		write_sysreg_el0(0, SYS_CNTP_CTL);
+		isb();
+
+		set_cntpoff(0);
+		break;
+	case NR_KVM_TIMERS:
+		BUG();
+	}
+
+	trace_kvm_timer_save_state(ctx);
+
+	ctx->loaded = false;
+out:
+	local_irq_restore(flags);
+}
+
+/*
+ * Schedule the background timer before calling kvm_vcpu_halt, so that this
+ * thread is removed from its waitqueue and made runnable when there's a timer
+ * interrupt to handle.
+ */
+static void kvm_timer_blocking(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+	struct timer_map map;
+
+	get_timer_map(vcpu, &map);
+
+	/*
+	 * If no timers are capable of raising interrupts (disabled or
+	 * masked), then there's no more work for us to do.
+	 */
+	if (!kvm_timer_irq_can_fire(map.direct_vtimer) &&
+	    !kvm_timer_irq_can_fire(map.direct_ptimer) &&
+	    !kvm_timer_irq_can_fire(map.emul_vtimer) &&
+	    !kvm_timer_irq_can_fire(map.emul_ptimer) &&
+	    !vcpu_has_wfit_active(vcpu))
+		return;
+
+	/*
+	 * At least one guest time will expire. Schedule a background timer.
+	 * Set the earliest expiration time among the guest timers.
+	 */
+	soft_timer_start(&timer->bg_timer, kvm_timer_earliest_exp(vcpu));
+}
+
+static void kvm_timer_unblocking(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+
+	soft_timer_cancel(&timer->bg_timer);
+}
+
+static void timer_restore_state(struct arch_timer_context *ctx)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(ctx->vcpu);
+	enum kvm_arch_timers index = arch_timer_ctx_index(ctx);
+	unsigned long flags;
+
+	if (!timer->enabled)
+		return;
+
+	local_irq_save(flags);
+
+	if (ctx->loaded)
+		goto out;
+
+	switch (index) {
+		u64 cval, offset;
+
+	case TIMER_VTIMER:
+	case TIMER_HVTIMER:
+		set_cntvoff(timer_get_offset(ctx));
+		write_sysreg_el0(timer_get_cval(ctx), SYS_CNTV_CVAL);
+		isb();
+		write_sysreg_el0(timer_get_ctl(ctx), SYS_CNTV_CTL);
+		break;
+	case TIMER_PTIMER:
+	case TIMER_HPTIMER:
+		cval = timer_get_cval(ctx);
+		offset = timer_get_offset(ctx);
+		set_cntpoff(offset);
+		cval += offset;
+		write_sysreg_el0(cval, SYS_CNTP_CVAL);
+		isb();
+		write_sysreg_el0(timer_get_ctl(ctx), SYS_CNTP_CTL);
+		break;
+	case NR_KVM_TIMERS:
+		BUG();
+	}
+
+	trace_kvm_timer_restore_state(ctx);
+
+	ctx->loaded = true;
+out:
+	local_irq_restore(flags);
+}
+
+static inline void set_timer_irq_phys_active(struct arch_timer_context *ctx, bool active)
+{
+	int r;
+	r = irq_set_irqchip_state(ctx->host_timer_irq, IRQCHIP_STATE_ACTIVE, active);
+	WARN_ON(r);
+}
+
+static void kvm_timer_vcpu_load_gic(struct arch_timer_context *ctx)
+{
+	struct kvm_vcpu *vcpu = ctx->vcpu;
+	bool phys_active = false;
+
+	/*
+	 * Update the timer output so that it is likely to match the
+	 * state we're about to restore. If the timer expires between
+	 * this point and the register restoration, we'll take the
+	 * interrupt anyway.
+	 */
+	kvm_timer_update_irq(ctx->vcpu, kvm_timer_should_fire(ctx), ctx);
+
+	if (irqchip_in_kernel(vcpu->kvm))
+		phys_active = kvm_vgic_map_is_active(vcpu, timer_irq(ctx));
+
+	phys_active |= ctx->irq.level;
+
+	set_timer_irq_phys_active(ctx, phys_active);
+}
+
+static void kvm_timer_vcpu_load_nogic(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
+
+	/*
+	 * Update the timer output so that it is likely to match the
+	 * state we're about to restore. If the timer expires between
+	 * this point and the register restoration, we'll take the
+	 * interrupt anyway.
+	 */
+	kvm_timer_update_irq(vcpu, kvm_timer_should_fire(vtimer), vtimer);
+
+	/*
+	 * When using a userspace irqchip with the architected timers and a
+	 * host interrupt controller that doesn't support an active state, we
+	 * must still prevent continuously exiting from the guest, and
+	 * therefore mask the physical interrupt by disabling it on the host
+	 * interrupt controller when the virtual level is high, such that the
+	 * guest can make forward progress.  Once we detect the output level
+	 * being de-asserted, we unmask the interrupt again so that we exit
+	 * from the guest when the timer fires.
+	 */
+	if (vtimer->irq.level)
+		disable_percpu_irq(host_vtimer_irq);
+	else
+		enable_percpu_irq(host_vtimer_irq, host_vtimer_irq_flags);
+}
+
+/* If _pred is true, set bit in _set, otherwise set it in _clr */
+#define assign_clear_set_bit(_pred, _bit, _clr, _set)			\
+	do {								\
+		if (_pred)						\
+			(_set) |= (_bit);				\
+		else							\
+			(_clr) |= (_bit);				\
+	} while (0)
+
+static void kvm_timer_vcpu_load_nested_switch(struct kvm_vcpu *vcpu,
+					      struct timer_map *map)
+{
+	int hw, ret;
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return;
+
+	/*
+	 * We only ever unmap the vtimer irq on a VHE system that runs nested
+	 * virtualization, in which case we have both a valid emul_vtimer,
+	 * emul_ptimer, direct_vtimer, and direct_ptimer.
+	 *
+	 * Since this is called from kvm_timer_vcpu_load(), a change between
+	 * vEL2 and vEL1/0 will have just happened, and the timer_map will
+	 * represent this, and therefore we switch the emul/direct mappings
+	 * below.
+	 */
+	hw = kvm_vgic_get_map(vcpu, timer_irq(map->direct_vtimer));
+	if (hw < 0) {
+		kvm_vgic_unmap_phys_irq(vcpu, timer_irq(map->emul_vtimer));
+		kvm_vgic_unmap_phys_irq(vcpu, timer_irq(map->emul_ptimer));
+
+		ret = kvm_vgic_map_phys_irq(vcpu,
+					    map->direct_vtimer->host_timer_irq,
+					    timer_irq(map->direct_vtimer),
+					    &arch_timer_irq_ops);
+		WARN_ON_ONCE(ret);
+		ret = kvm_vgic_map_phys_irq(vcpu,
+					    map->direct_ptimer->host_timer_irq,
+					    timer_irq(map->direct_ptimer),
+					    &arch_timer_irq_ops);
+		WARN_ON_ONCE(ret);
+
+		/*
+		 * The virtual offset behaviour is "interresting", as it
+		 * always applies when HCR_EL2.E2H==0, but only when
+		 * accessed from EL1 when HCR_EL2.E2H==1. So make sure we
+		 * track E2H when putting the HV timer in "direct" mode.
+		 */
+		if (map->direct_vtimer == vcpu_hvtimer(vcpu)) {
+			struct arch_timer_offset *offs = &map->direct_vtimer->offset;
+
+			if (vcpu_el2_e2h_is_set(vcpu))
+				offs->vcpu_offset = NULL;
+			else
+				offs->vcpu_offset = &__vcpu_sys_reg(vcpu, CNTVOFF_EL2);
+		}
+	}
+}
+
+static void timer_set_traps(struct kvm_vcpu *vcpu, struct timer_map *map)
+{
+	bool tpt, tpc;
+	u64 clr, set;
+
+	/*
+	 * No trapping gets configured here with nVHE. See
+	 * __timer_enable_traps(), which is where the stuff happens.
+	 */
+	if (!has_vhe())
+		return;
+
+	/*
+	 * Our default policy is not to trap anything. As we progress
+	 * within this function, reality kicks in and we start adding
+	 * traps based on emulation requirements.
+	 */
+	tpt = tpc = false;
+
+	/*
+	 * We have two possibility to deal with a physical offset:
+	 *
+	 * - Either we have CNTPOFF (yay!) or the offset is 0:
+	 *   we let the guest freely access the HW
+	 *
+	 * - or neither of these condition apply:
+	 *   we trap accesses to the HW, but still use it
+	 *   after correcting the physical offset
+	 */
+	if (!has_cntpoff() && timer_get_offset(map->direct_ptimer))
+		tpt = tpc = true;
+
+	/*
+	 * Apply the enable bits that the guest hypervisor has requested for
+	 * its own guest. We can only add traps that wouldn't have been set
+	 * above.
+	 */
+	if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
+		u64 val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2);
+
+		/* Use the VHE format for mental sanity */
+		if (!vcpu_el2_e2h_is_set(vcpu))
+			val = (val & (CNTHCTL_EL1PCEN | CNTHCTL_EL1PCTEN)) << 10;
+
+		tpt |= !(val & (CNTHCTL_EL1PCEN << 10));
+		tpc |= !(val & (CNTHCTL_EL1PCTEN << 10));
+	}
+
+	/*
+	 * Now that we have collected our requirements, compute the
+	 * trap and enable bits.
+	 */
+	set = 0;
+	clr = 0;
+
+	assign_clear_set_bit(tpt, CNTHCTL_EL1PCEN << 10, set, clr);
+	assign_clear_set_bit(tpc, CNTHCTL_EL1PCTEN << 10, set, clr);
+
+	/* This only happens on VHE, so use the CNTHCTL_EL2 accessor. */
+	sysreg_clear_set(cnthctl_el2, clr, set);
+}
+
+void kvm_timer_vcpu_load(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+	struct timer_map map;
+
+	if (unlikely(!timer->enabled))
+		return;
+
+	get_timer_map(vcpu, &map);
+
+	if (static_branch_likely(&has_gic_active_state)) {
+		if (vcpu_has_nv(vcpu))
+			kvm_timer_vcpu_load_nested_switch(vcpu, &map);
+
+		kvm_timer_vcpu_load_gic(map.direct_vtimer);
+		if (map.direct_ptimer)
+			kvm_timer_vcpu_load_gic(map.direct_ptimer);
+	} else {
+		kvm_timer_vcpu_load_nogic(vcpu);
+	}
+
+	kvm_timer_unblocking(vcpu);
+
+	timer_restore_state(map.direct_vtimer);
+	if (map.direct_ptimer)
+		timer_restore_state(map.direct_ptimer);
+	if (map.emul_vtimer)
+		timer_emulate(map.emul_vtimer);
+	if (map.emul_ptimer)
+		timer_emulate(map.emul_ptimer);
+
+	timer_set_traps(vcpu, &map);
+}
+
+bool kvm_timer_should_notify_user(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
+	struct arch_timer_context *ptimer = vcpu_ptimer(vcpu);
+	struct kvm_sync_regs *sregs = &vcpu->run->s.regs;
+	bool vlevel, plevel;
+
+	if (likely(irqchip_in_kernel(vcpu->kvm)))
+		return false;
+
+	vlevel = sregs->device_irq_level & KVM_ARM_DEV_EL1_VTIMER;
+	plevel = sregs->device_irq_level & KVM_ARM_DEV_EL1_PTIMER;
+
+	return kvm_timer_should_fire(vtimer) != vlevel ||
+	       kvm_timer_should_fire(ptimer) != plevel;
+}
+
+void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+	struct timer_map map;
+
+	if (unlikely(!timer->enabled))
+		return;
+
+	get_timer_map(vcpu, &map);
+
+	timer_save_state(map.direct_vtimer);
+	if (map.direct_ptimer)
+		timer_save_state(map.direct_ptimer);
+
+	/*
+	 * Cancel soft timer emulation, because the only case where we
+	 * need it after a vcpu_put is in the context of a sleeping VCPU, and
+	 * in that case we already factor in the deadline for the physical
+	 * timer when scheduling the bg_timer.
+	 *
+	 * In any case, we re-schedule the hrtimer for the physical timer when
+	 * coming back to the VCPU thread in kvm_timer_vcpu_load().
+	 */
+	if (map.emul_vtimer)
+		soft_timer_cancel(&map.emul_vtimer->hrtimer);
+	if (map.emul_ptimer)
+		soft_timer_cancel(&map.emul_ptimer->hrtimer);
+
+	if (kvm_vcpu_is_blocking(vcpu))
+		kvm_timer_blocking(vcpu);
+}
+
+/*
+ * With a userspace irqchip we have to check if the guest de-asserted the
+ * timer and if so, unmask the timer irq signal on the host interrupt
+ * controller to ensure that we see future timer signals.
+ */
+static void unmask_vtimer_irq_user(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
+
+	if (!kvm_timer_should_fire(vtimer)) {
+		kvm_timer_update_irq(vcpu, false, vtimer);
+		if (static_branch_likely(&has_gic_active_state))
+			set_timer_irq_phys_active(vtimer, false);
+		else
+			enable_percpu_irq(host_vtimer_irq, host_vtimer_irq_flags);
+	}
+}
+
+void kvm_timer_sync_user(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+
+	if (unlikely(!timer->enabled))
+		return;
+
+	if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
+		unmask_vtimer_irq_user(vcpu);
+}
+
+int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+	struct timer_map map;
+
+	get_timer_map(vcpu, &map);
+
+	/*
+	 * The bits in CNTV_CTL are architecturally reset to UNKNOWN for ARMv8
+	 * and to 0 for ARMv7.  We provide an implementation that always
+	 * resets the timer to be disabled and unmasked and is compliant with
+	 * the ARMv7 architecture.
+	 */
+	for (int i = 0; i < nr_timers(vcpu); i++)
+		timer_set_ctl(vcpu_get_timer(vcpu, i), 0);
+
+	/*
+	 * A vcpu running at EL2 is in charge of the offset applied to
+	 * the virtual timer, so use the physical VM offset, and point
+	 * the vcpu offset to CNTVOFF_EL2.
+	 */
+	if (vcpu_has_nv(vcpu)) {
+		struct arch_timer_offset *offs = &vcpu_vtimer(vcpu)->offset;
+
+		offs->vcpu_offset = &__vcpu_sys_reg(vcpu, CNTVOFF_EL2);
+		offs->vm_offset = &vcpu->kvm->arch.timer_data.poffset;
+	}
+
+	if (timer->enabled) {
+		for (int i = 0; i < nr_timers(vcpu); i++)
+			kvm_timer_update_irq(vcpu, false,
+					     vcpu_get_timer(vcpu, i));
+
+		if (irqchip_in_kernel(vcpu->kvm)) {
+			kvm_vgic_reset_mapped_irq(vcpu, timer_irq(map.direct_vtimer));
+			if (map.direct_ptimer)
+				kvm_vgic_reset_mapped_irq(vcpu, timer_irq(map.direct_ptimer));
+		}
+	}
+
+	if (map.emul_vtimer)
+		soft_timer_cancel(&map.emul_vtimer->hrtimer);
+	if (map.emul_ptimer)
+		soft_timer_cancel(&map.emul_ptimer->hrtimer);
+
+	return 0;
+}
+
+static void timer_context_init(struct kvm_vcpu *vcpu, int timerid)
+{
+	struct arch_timer_context *ctxt = vcpu_get_timer(vcpu, timerid);
+	struct kvm *kvm = vcpu->kvm;
+
+	ctxt->vcpu = vcpu;
+
+	if (timerid == TIMER_VTIMER)
+		ctxt->offset.vm_offset = &kvm->arch.timer_data.voffset;
+	else
+		ctxt->offset.vm_offset = &kvm->arch.timer_data.poffset;
+
+	hrtimer_init(&ctxt->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD);
+	ctxt->hrtimer.function = kvm_hrtimer_expire;
+
+	switch (timerid) {
+	case TIMER_PTIMER:
+	case TIMER_HPTIMER:
+		ctxt->host_timer_irq = host_ptimer_irq;
+		break;
+	case TIMER_VTIMER:
+	case TIMER_HVTIMER:
+		ctxt->host_timer_irq = host_vtimer_irq;
+		break;
+	}
+}
+
+void kvm_timer_vcpu_init(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+
+	for (int i = 0; i < NR_KVM_TIMERS; i++)
+		timer_context_init(vcpu, i);
+
+	/* Synchronize offsets across timers of a VM if not already provided */
+	if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &vcpu->kvm->arch.flags)) {
+		timer_set_offset(vcpu_vtimer(vcpu), kvm_phys_timer_read());
+		timer_set_offset(vcpu_ptimer(vcpu), 0);
+	}
+
+	hrtimer_init(&timer->bg_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_HARD);
+	timer->bg_timer.function = kvm_bg_timer_expire;
+}
+
+void kvm_timer_init_vm(struct kvm *kvm)
+{
+	for (int i = 0; i < NR_KVM_TIMERS; i++)
+		kvm->arch.timer_data.ppi[i] = default_ppi[i];
+}
+
+void kvm_timer_cpu_up(void)
+{
+	enable_percpu_irq(host_vtimer_irq, host_vtimer_irq_flags);
+	if (host_ptimer_irq)
+		enable_percpu_irq(host_ptimer_irq, host_ptimer_irq_flags);
+}
+
+void kvm_timer_cpu_down(void)
+{
+	disable_percpu_irq(host_vtimer_irq);
+	if (host_ptimer_irq)
+		disable_percpu_irq(host_ptimer_irq);
+}
+
+int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value)
+{
+	struct arch_timer_context *timer;
+
+	switch (regid) {
+	case KVM_REG_ARM_TIMER_CTL:
+		timer = vcpu_vtimer(vcpu);
+		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CTL, value);
+		break;
+	case KVM_REG_ARM_TIMER_CNT:
+		if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET,
+			      &vcpu->kvm->arch.flags)) {
+			timer = vcpu_vtimer(vcpu);
+			timer_set_offset(timer, kvm_phys_timer_read() - value);
+		}
+		break;
+	case KVM_REG_ARM_TIMER_CVAL:
+		timer = vcpu_vtimer(vcpu);
+		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CVAL, value);
+		break;
+	case KVM_REG_ARM_PTIMER_CTL:
+		timer = vcpu_ptimer(vcpu);
+		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CTL, value);
+		break;
+	case KVM_REG_ARM_PTIMER_CNT:
+		if (!test_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET,
+			      &vcpu->kvm->arch.flags)) {
+			timer = vcpu_ptimer(vcpu);
+			timer_set_offset(timer, kvm_phys_timer_read() - value);
+		}
+		break;
+	case KVM_REG_ARM_PTIMER_CVAL:
+		timer = vcpu_ptimer(vcpu);
+		kvm_arm_timer_write(vcpu, timer, TIMER_REG_CVAL, value);
+		break;
+
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static u64 read_timer_ctl(struct arch_timer_context *timer)
+{
+	/*
+	 * Set ISTATUS bit if it's expired.
+	 * Note that according to ARMv8 ARM Issue A.k, ISTATUS bit is
+	 * UNKNOWN when ENABLE bit is 0, so we chose to set ISTATUS bit
+	 * regardless of ENABLE bit for our implementation convenience.
+	 */
+	u32 ctl = timer_get_ctl(timer);
+
+	if (!kvm_timer_compute_delta(timer))
+		ctl |= ARCH_TIMER_CTRL_IT_STAT;
+
+	return ctl;
+}
+
+u64 kvm_arm_timer_get_reg(struct kvm_vcpu *vcpu, u64 regid)
+{
+	switch (regid) {
+	case KVM_REG_ARM_TIMER_CTL:
+		return kvm_arm_timer_read(vcpu,
+					  vcpu_vtimer(vcpu), TIMER_REG_CTL);
+	case KVM_REG_ARM_TIMER_CNT:
+		return kvm_arm_timer_read(vcpu,
+					  vcpu_vtimer(vcpu), TIMER_REG_CNT);
+	case KVM_REG_ARM_TIMER_CVAL:
+		return kvm_arm_timer_read(vcpu,
+					  vcpu_vtimer(vcpu), TIMER_REG_CVAL);
+	case KVM_REG_ARM_PTIMER_CTL:
+		return kvm_arm_timer_read(vcpu,
+					  vcpu_ptimer(vcpu), TIMER_REG_CTL);
+	case KVM_REG_ARM_PTIMER_CNT:
+		return kvm_arm_timer_read(vcpu,
+					  vcpu_ptimer(vcpu), TIMER_REG_CNT);
+	case KVM_REG_ARM_PTIMER_CVAL:
+		return kvm_arm_timer_read(vcpu,
+					  vcpu_ptimer(vcpu), TIMER_REG_CVAL);
+	}
+	return (u64)-1;
+}
+
+static u64 kvm_arm_timer_read(struct kvm_vcpu *vcpu,
+			      struct arch_timer_context *timer,
+			      enum kvm_arch_timer_regs treg)
+{
+	u64 val;
+
+	switch (treg) {
+	case TIMER_REG_TVAL:
+		val = timer_get_cval(timer) - kvm_phys_timer_read() + timer_get_offset(timer);
+		val = lower_32_bits(val);
+		break;
+
+	case TIMER_REG_CTL:
+		val = read_timer_ctl(timer);
+		break;
+
+	case TIMER_REG_CVAL:
+		val = timer_get_cval(timer);
+		break;
+
+	case TIMER_REG_CNT:
+		val = kvm_phys_timer_read() - timer_get_offset(timer);
+		break;
+
+	case TIMER_REG_VOFF:
+		val = *timer->offset.vcpu_offset;
+		break;
+
+	default:
+		BUG();
+	}
+
+	return val;
+}
+
+u64 kvm_arm_timer_read_sysreg(struct kvm_vcpu *vcpu,
+			      enum kvm_arch_timers tmr,
+			      enum kvm_arch_timer_regs treg)
+{
+	struct arch_timer_context *timer;
+	struct timer_map map;
+	u64 val;
+
+	get_timer_map(vcpu, &map);
+	timer = vcpu_get_timer(vcpu, tmr);
+
+	if (timer == map.emul_vtimer || timer == map.emul_ptimer)
+		return kvm_arm_timer_read(vcpu, timer, treg);
+
+	preempt_disable();
+	timer_save_state(timer);
+
+	val = kvm_arm_timer_read(vcpu, timer, treg);
+
+	timer_restore_state(timer);
+	preempt_enable();
+
+	return val;
+}
+
+static void kvm_arm_timer_write(struct kvm_vcpu *vcpu,
+				struct arch_timer_context *timer,
+				enum kvm_arch_timer_regs treg,
+				u64 val)
+{
+	switch (treg) {
+	case TIMER_REG_TVAL:
+		timer_set_cval(timer, kvm_phys_timer_read() - timer_get_offset(timer) + (s32)val);
+		break;
+
+	case TIMER_REG_CTL:
+		timer_set_ctl(timer, val & ~ARCH_TIMER_CTRL_IT_STAT);
+		break;
+
+	case TIMER_REG_CVAL:
+		timer_set_cval(timer, val);
+		break;
+
+	case TIMER_REG_VOFF:
+		*timer->offset.vcpu_offset = val;
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+void kvm_arm_timer_write_sysreg(struct kvm_vcpu *vcpu,
+				enum kvm_arch_timers tmr,
+				enum kvm_arch_timer_regs treg,
+				u64 val)
+{
+	struct arch_timer_context *timer;
+	struct timer_map map;
+
+	get_timer_map(vcpu, &map);
+	timer = vcpu_get_timer(vcpu, tmr);
+	if (timer == map.emul_vtimer || timer == map.emul_ptimer) {
+		soft_timer_cancel(&timer->hrtimer);
+		kvm_arm_timer_write(vcpu, timer, treg, val);
+		timer_emulate(timer);
+	} else {
+		preempt_disable();
+		timer_save_state(timer);
+		kvm_arm_timer_write(vcpu, timer, treg, val);
+		timer_restore_state(timer);
+		preempt_enable();
+	}
+}
+
+static int timer_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
+{
+	if (vcpu)
+		irqd_set_forwarded_to_vcpu(d);
+	else
+		irqd_clr_forwarded_to_vcpu(d);
+
+	return 0;
+}
+
+static int timer_irq_set_irqchip_state(struct irq_data *d,
+				       enum irqchip_irq_state which, bool val)
+{
+	if (which != IRQCHIP_STATE_ACTIVE || !irqd_is_forwarded_to_vcpu(d))
+		return irq_chip_set_parent_state(d, which, val);
+
+	if (val)
+		irq_chip_mask_parent(d);
+	else
+		irq_chip_unmask_parent(d);
+
+	return 0;
+}
+
+static void timer_irq_eoi(struct irq_data *d)
+{
+	if (!irqd_is_forwarded_to_vcpu(d))
+		irq_chip_eoi_parent(d);
+}
+
+static void timer_irq_ack(struct irq_data *d)
+{
+	d = d->parent_data;
+	if (d->chip->irq_ack)
+		d->chip->irq_ack(d);
+}
+
+static struct irq_chip timer_chip = {
+	.name			= "KVM",
+	.irq_ack		= timer_irq_ack,
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_eoi		= timer_irq_eoi,
+	.irq_set_type		= irq_chip_set_type_parent,
+	.irq_set_vcpu_affinity	= timer_irq_set_vcpu_affinity,
+	.irq_set_irqchip_state	= timer_irq_set_irqchip_state,
+};
+
+static int timer_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				  unsigned int nr_irqs, void *arg)
+{
+	irq_hw_number_t hwirq = (uintptr_t)arg;
+
+	return irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+					     &timer_chip, NULL);
+}
+
+static void timer_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				  unsigned int nr_irqs)
+{
+}
+
+static const struct irq_domain_ops timer_domain_ops = {
+	.alloc	= timer_irq_domain_alloc,
+	.free	= timer_irq_domain_free,
+};
+
+static void kvm_irq_fixup_flags(unsigned int virq, u32 *flags)
+{
+	*flags = irq_get_trigger_type(virq);
+	if (*flags != IRQF_TRIGGER_HIGH && *flags != IRQF_TRIGGER_LOW) {
+		kvm_err("Invalid trigger for timer IRQ%d, assuming level low\n",
+			virq);
+		*flags = IRQF_TRIGGER_LOW;
+	}
+}
+
+static int kvm_irq_init(struct arch_timer_kvm_info *info)
+{
+	struct irq_domain *domain = NULL;
+
+	if (info->virtual_irq <= 0) {
+		kvm_err("kvm_arch_timer: invalid virtual timer IRQ: %d\n",
+			info->virtual_irq);
+		return -ENODEV;
+	}
+
+	host_vtimer_irq = info->virtual_irq;
+	kvm_irq_fixup_flags(host_vtimer_irq, &host_vtimer_irq_flags);
+
+	if (kvm_vgic_global_state.no_hw_deactivation) {
+		struct fwnode_handle *fwnode;
+		struct irq_data *data;
+
+		fwnode = irq_domain_alloc_named_fwnode("kvm-timer");
+		if (!fwnode)
+			return -ENOMEM;
+
+		/* Assume both vtimer and ptimer in the same parent */
+		data = irq_get_irq_data(host_vtimer_irq);
+		domain = irq_domain_create_hierarchy(data->domain, 0,
+						     NR_KVM_TIMERS, fwnode,
+						     &timer_domain_ops, NULL);
+		if (!domain) {
+			irq_domain_free_fwnode(fwnode);
+			return -ENOMEM;
+		}
+
+		arch_timer_irq_ops.flags |= VGIC_IRQ_SW_RESAMPLE;
+		WARN_ON(irq_domain_push_irq(domain, host_vtimer_irq,
+					    (void *)TIMER_VTIMER));
+	}
+
+	if (info->physical_irq > 0) {
+		host_ptimer_irq = info->physical_irq;
+		kvm_irq_fixup_flags(host_ptimer_irq, &host_ptimer_irq_flags);
+
+		if (domain)
+			WARN_ON(irq_domain_push_irq(domain, host_ptimer_irq,
+						    (void *)TIMER_PTIMER));
+	}
+
+	return 0;
+}
+
+int __init kvm_timer_hyp_init(bool has_gic)
+{
+	struct arch_timer_kvm_info *info;
+	int err;
+
+	info = arch_timer_get_kvm_info();
+	timecounter = &info->timecounter;
+
+	if (!timecounter->cc) {
+		kvm_err("kvm_arch_timer: uninitialized timecounter\n");
+		return -ENODEV;
+	}
+
+	err = kvm_irq_init(info);
+	if (err)
+		return err;
+
+	/* First, do the virtual EL1 timer irq */
+
+	err = request_percpu_irq(host_vtimer_irq, kvm_arch_timer_handler,
+				 "kvm guest vtimer", kvm_get_running_vcpus());
+	if (err) {
+		kvm_err("kvm_arch_timer: can't request vtimer interrupt %d (%d)\n",
+			host_vtimer_irq, err);
+		return err;
+	}
+
+	if (has_gic) {
+		err = irq_set_vcpu_affinity(host_vtimer_irq,
+					    kvm_get_running_vcpus());
+		if (err) {
+			kvm_err("kvm_arch_timer: error setting vcpu affinity\n");
+			goto out_free_vtimer_irq;
+		}
+
+		static_branch_enable(&has_gic_active_state);
+	}
+
+	kvm_debug("virtual timer IRQ%d\n", host_vtimer_irq);
+
+	/* Now let's do the physical EL1 timer irq */
+
+	if (info->physical_irq > 0) {
+		err = request_percpu_irq(host_ptimer_irq, kvm_arch_timer_handler,
+					 "kvm guest ptimer", kvm_get_running_vcpus());
+		if (err) {
+			kvm_err("kvm_arch_timer: can't request ptimer interrupt %d (%d)\n",
+				host_ptimer_irq, err);
+			goto out_free_vtimer_irq;
+		}
+
+		if (has_gic) {
+			err = irq_set_vcpu_affinity(host_ptimer_irq,
+						    kvm_get_running_vcpus());
+			if (err) {
+				kvm_err("kvm_arch_timer: error setting vcpu affinity\n");
+				goto out_free_ptimer_irq;
+			}
+		}
+
+		kvm_debug("physical timer IRQ%d\n", host_ptimer_irq);
+	} else if (has_vhe()) {
+		kvm_err("kvm_arch_timer: invalid physical timer IRQ: %d\n",
+			info->physical_irq);
+		err = -ENODEV;
+		goto out_free_vtimer_irq;
+	}
+
+	return 0;
+
+out_free_ptimer_irq:
+	if (info->physical_irq > 0)
+		free_percpu_irq(host_ptimer_irq, kvm_get_running_vcpus());
+out_free_vtimer_irq:
+	free_percpu_irq(host_vtimer_irq, kvm_get_running_vcpus());
+	return err;
+}
+
+void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+
+	soft_timer_cancel(&timer->bg_timer);
+}
+
+static bool timer_irqs_are_valid(struct kvm_vcpu *vcpu)
+{
+	u32 ppis = 0;
+	bool valid;
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+
+	for (int i = 0; i < nr_timers(vcpu); i++) {
+		struct arch_timer_context *ctx;
+		int irq;
+
+		ctx = vcpu_get_timer(vcpu, i);
+		irq = timer_irq(ctx);
+		if (kvm_vgic_set_owner(vcpu, irq, ctx))
+			break;
+
+		/*
+		 * We know by construction that we only have PPIs, so
+		 * all values are less than 32.
+		 */
+		ppis |= BIT(irq);
+	}
+
+	valid = hweight32(ppis) == nr_timers(vcpu);
+
+	if (valid)
+		set_bit(KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE, &vcpu->kvm->arch.flags);
+
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+
+	return valid;
+}
+
+static bool kvm_arch_timer_get_input_level(int vintid)
+{
+	struct kvm_vcpu *vcpu = kvm_get_running_vcpu();
+
+	if (WARN(!vcpu, "No vcpu context!\n"))
+		return false;
+
+	for (int i = 0; i < nr_timers(vcpu); i++) {
+		struct arch_timer_context *ctx;
+
+		ctx = vcpu_get_timer(vcpu, i);
+		if (timer_irq(ctx) == vintid)
+			return kvm_timer_should_fire(ctx);
+	}
+
+	/* A timer IRQ has fired, but no matching timer was found? */
+	WARN_RATELIMIT(1, "timer INTID%d unknown\n", vintid);
+
+	return false;
+}
+
+int kvm_timer_enable(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_cpu *timer = vcpu_timer(vcpu);
+	struct timer_map map;
+	int ret;
+
+	if (timer->enabled)
+		return 0;
+
+	/* Without a VGIC we do not map virtual IRQs to physical IRQs */
+	if (!irqchip_in_kernel(vcpu->kvm))
+		goto no_vgic;
+
+	/*
+	 * At this stage, we have the guarantee that the vgic is both
+	 * available and initialized.
+	 */
+	if (!timer_irqs_are_valid(vcpu)) {
+		kvm_debug("incorrectly configured timer irqs\n");
+		return -EINVAL;
+	}
+
+	get_timer_map(vcpu, &map);
+
+	ret = kvm_vgic_map_phys_irq(vcpu,
+				    map.direct_vtimer->host_timer_irq,
+				    timer_irq(map.direct_vtimer),
+				    &arch_timer_irq_ops);
+	if (ret)
+		return ret;
+
+	if (map.direct_ptimer) {
+		ret = kvm_vgic_map_phys_irq(vcpu,
+					    map.direct_ptimer->host_timer_irq,
+					    timer_irq(map.direct_ptimer),
+					    &arch_timer_irq_ops);
+	}
+
+	if (ret)
+		return ret;
+
+no_vgic:
+	timer->enabled = 1;
+	return 0;
+}
+
+/* If we have CNTPOFF, permanently set ECV to enable it */
+void kvm_timer_init_vhe(void)
+{
+	if (cpus_have_final_cap(ARM64_HAS_ECV_CNTPOFF))
+		sysreg_clear_set(cnthctl_el2, 0, CNTHCTL_ECV);
+}
+
+int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	int __user *uaddr = (int __user *)(long)attr->addr;
+	int irq, idx, ret = 0;
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return -EINVAL;
+
+	if (get_user(irq, uaddr))
+		return -EFAULT;
+
+	if (!(irq_is_ppi(irq)))
+		return -EINVAL;
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+
+	if (test_bit(KVM_ARCH_FLAG_TIMER_PPIS_IMMUTABLE,
+		     &vcpu->kvm->arch.flags)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
+		idx = TIMER_VTIMER;
+		break;
+	case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
+		idx = TIMER_PTIMER;
+		break;
+	case KVM_ARM_VCPU_TIMER_IRQ_HVTIMER:
+		idx = TIMER_HVTIMER;
+		break;
+	case KVM_ARM_VCPU_TIMER_IRQ_HPTIMER:
+		idx = TIMER_HPTIMER;
+		break;
+	default:
+		ret = -ENXIO;
+		goto out;
+	}
+
+	/*
+	 * We cannot validate the IRQ unicity before we run, so take it at
+	 * face value. The verdict will be given on first vcpu run, for each
+	 * vcpu. Yes this is late. Blame it on the stupid API.
+	 */
+	vcpu->kvm->arch.timer_data.ppi[idx] = irq;
+
+out:
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+	return ret;
+}
+
+int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	int __user *uaddr = (int __user *)(long)attr->addr;
+	struct arch_timer_context *timer;
+	int irq;
+
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
+		timer = vcpu_vtimer(vcpu);
+		break;
+	case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
+		timer = vcpu_ptimer(vcpu);
+		break;
+	case KVM_ARM_VCPU_TIMER_IRQ_HVTIMER:
+		timer = vcpu_hvtimer(vcpu);
+		break;
+	case KVM_ARM_VCPU_TIMER_IRQ_HPTIMER:
+		timer = vcpu_hptimer(vcpu);
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	irq = timer_irq(timer);
+	return put_user(irq, uaddr);
+}
+
+int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
+	case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
+	case KVM_ARM_VCPU_TIMER_IRQ_HVTIMER:
+	case KVM_ARM_VCPU_TIMER_IRQ_HPTIMER:
+		return 0;
+	}
+
+	return -ENXIO;
+}
+
+int kvm_vm_ioctl_set_counter_offset(struct kvm *kvm,
+				    struct kvm_arm_counter_offset *offset)
+{
+	int ret = 0;
+
+	if (offset->reserved)
+		return -EINVAL;
+
+	mutex_lock(&kvm->lock);
+
+	if (lock_all_vcpus(kvm)) {
+		set_bit(KVM_ARCH_FLAG_VM_COUNTER_OFFSET, &kvm->arch.flags);
+
+		/*
+		 * If userspace decides to set the offset using this
+		 * API rather than merely restoring the counter
+		 * values, the offset applies to both the virtual and
+		 * physical views.
+		 */
+		kvm->arch.timer_data.voffset = offset->counter_offset;
+		kvm->arch.timer_data.poffset = offset->counter_offset;
+
+		unlock_all_vcpus(kvm);
+	} else {
+		ret = -EBUSY;
+	}
+
+	mutex_unlock(&kvm->lock);
+
+	return ret;
+}
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
new file mode 100644
index 000000000..685cc4361
--- /dev/null
+++ b/arch/arm64/kvm/arm.c
@@ -0,0 +1,2528 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/bug.h>
+#include <linux/cpu_pm.h>
+#include <linux/entry-kvm.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/kvm_host.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/mman.h>
+#include <linux/sched.h>
+#include <linux/kvm.h>
+#include <linux/kvm_irqfd.h>
+#include <linux/irqbypass.h>
+#include <linux/sched/stat.h>
+#include <linux/psci.h>
+#include <trace/events/kvm.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace_arm.h"
+
+#include <linux/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/mman.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/virt.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_nested.h>
+#include <asm/kvm_pkvm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/sections.h>
+
+#include <kvm/arm_hypercalls.h>
+#include <kvm/arm_pmu.h>
+#include <kvm/arm_psci.h>
+
+static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT;
+
+DECLARE_KVM_HYP_PER_CPU(unsigned long, kvm_hyp_vector);
+
+DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
+DECLARE_KVM_NVHE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
+
+DECLARE_KVM_NVHE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
+
+static bool vgic_present, kvm_arm_initialised;
+
+static DEFINE_PER_CPU(unsigned char, kvm_hyp_initialized);
+DEFINE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
+
+bool is_kvm_arm_initialised(void)
+{
+	return kvm_arm_initialised;
+}
+
+int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
+{
+	return kvm_vcpu_exiting_guest_mode(vcpu) == IN_GUEST_MODE;
+}
+
+int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
+			    struct kvm_enable_cap *cap)
+{
+	int r;
+	u64 new_cap;
+
+	if (cap->flags)
+		return -EINVAL;
+
+	switch (cap->cap) {
+	case KVM_CAP_ARM_NISV_TO_USER:
+		r = 0;
+		set_bit(KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER,
+			&kvm->arch.flags);
+		break;
+	case KVM_CAP_ARM_MTE:
+		mutex_lock(&kvm->lock);
+		if (!system_supports_mte() || kvm->created_vcpus) {
+			r = -EINVAL;
+		} else {
+			r = 0;
+			set_bit(KVM_ARCH_FLAG_MTE_ENABLED, &kvm->arch.flags);
+		}
+		mutex_unlock(&kvm->lock);
+		break;
+	case KVM_CAP_ARM_SYSTEM_SUSPEND:
+		r = 0;
+		set_bit(KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED, &kvm->arch.flags);
+		break;
+	case KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE:
+		new_cap = cap->args[0];
+
+		mutex_lock(&kvm->slots_lock);
+		/*
+		 * To keep things simple, allow changing the chunk
+		 * size only when no memory slots have been created.
+		 */
+		if (!kvm_are_all_memslots_empty(kvm)) {
+			r = -EINVAL;
+		} else if (new_cap && !kvm_is_block_size_supported(new_cap)) {
+			r = -EINVAL;
+		} else {
+			r = 0;
+			kvm->arch.mmu.split_page_chunk_size = new_cap;
+		}
+		mutex_unlock(&kvm->slots_lock);
+		break;
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
+static int kvm_arm_default_max_vcpus(void)
+{
+	return vgic_present ? kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
+}
+
+/**
+ * kvm_arch_init_vm - initializes a VM data structure
+ * @kvm:	pointer to the KVM struct
+ */
+int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
+{
+	int ret;
+
+	mutex_init(&kvm->arch.config_lock);
+
+#ifdef CONFIG_LOCKDEP
+	/* Clue in lockdep that the config_lock must be taken inside kvm->lock */
+	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->lock);
+#endif
+
+	ret = kvm_share_hyp(kvm, kvm + 1);
+	if (ret)
+		return ret;
+
+	ret = pkvm_init_host_vm(kvm);
+	if (ret)
+		goto err_unshare_kvm;
+
+	if (!zalloc_cpumask_var(&kvm->arch.supported_cpus, GFP_KERNEL_ACCOUNT)) {
+		ret = -ENOMEM;
+		goto err_unshare_kvm;
+	}
+	cpumask_copy(kvm->arch.supported_cpus, cpu_possible_mask);
+
+	ret = kvm_init_stage2_mmu(kvm, &kvm->arch.mmu, type);
+	if (ret)
+		goto err_free_cpumask;
+
+	kvm_vgic_early_init(kvm);
+
+	kvm_timer_init_vm(kvm);
+
+	/* The maximum number of VCPUs is limited by the host's GIC model */
+	kvm->max_vcpus = kvm_arm_default_max_vcpus();
+
+	kvm_arm_init_hypercalls(kvm);
+
+	bitmap_zero(kvm->arch.vcpu_features, KVM_VCPU_MAX_FEATURES);
+
+	return 0;
+
+err_free_cpumask:
+	free_cpumask_var(kvm->arch.supported_cpus);
+err_unshare_kvm:
+	kvm_unshare_hyp(kvm, kvm + 1);
+	return ret;
+}
+
+vm_fault_t kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf)
+{
+	return VM_FAULT_SIGBUS;
+}
+
+
+/**
+ * kvm_arch_destroy_vm - destroy the VM data structure
+ * @kvm:	pointer to the KVM struct
+ */
+void kvm_arch_destroy_vm(struct kvm *kvm)
+{
+	bitmap_free(kvm->arch.pmu_filter);
+	free_cpumask_var(kvm->arch.supported_cpus);
+
+	kvm_vgic_destroy(kvm);
+
+	if (is_protected_kvm_enabled())
+		pkvm_destroy_hyp_vm(kvm);
+
+	kvm_destroy_vcpus(kvm);
+
+	kvm_unshare_hyp(kvm, kvm + 1);
+
+	kvm_arm_teardown_hypercalls(kvm);
+}
+
+int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
+{
+	int r;
+	switch (ext) {
+	case KVM_CAP_IRQCHIP:
+		r = vgic_present;
+		break;
+	case KVM_CAP_IOEVENTFD:
+	case KVM_CAP_DEVICE_CTRL:
+	case KVM_CAP_USER_MEMORY:
+	case KVM_CAP_SYNC_MMU:
+	case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+	case KVM_CAP_ONE_REG:
+	case KVM_CAP_ARM_PSCI:
+	case KVM_CAP_ARM_PSCI_0_2:
+	case KVM_CAP_READONLY_MEM:
+	case KVM_CAP_MP_STATE:
+	case KVM_CAP_IMMEDIATE_EXIT:
+	case KVM_CAP_VCPU_EVENTS:
+	case KVM_CAP_ARM_IRQ_LINE_LAYOUT_2:
+	case KVM_CAP_ARM_NISV_TO_USER:
+	case KVM_CAP_ARM_INJECT_EXT_DABT:
+	case KVM_CAP_SET_GUEST_DEBUG:
+	case KVM_CAP_VCPU_ATTRIBUTES:
+	case KVM_CAP_PTP_KVM:
+	case KVM_CAP_ARM_SYSTEM_SUSPEND:
+	case KVM_CAP_IRQFD_RESAMPLE:
+	case KVM_CAP_COUNTER_OFFSET:
+		r = 1;
+		break;
+	case KVM_CAP_SET_GUEST_DEBUG2:
+		return KVM_GUESTDBG_VALID_MASK;
+	case KVM_CAP_ARM_SET_DEVICE_ADDR:
+		r = 1;
+		break;
+	case KVM_CAP_NR_VCPUS:
+		/*
+		 * ARM64 treats KVM_CAP_NR_CPUS differently from all other
+		 * architectures, as it does not always bound it to
+		 * KVM_CAP_MAX_VCPUS. It should not matter much because
+		 * this is just an advisory value.
+		 */
+		r = min_t(unsigned int, num_online_cpus(),
+			  kvm_arm_default_max_vcpus());
+		break;
+	case KVM_CAP_MAX_VCPUS:
+	case KVM_CAP_MAX_VCPU_ID:
+		if (kvm)
+			r = kvm->max_vcpus;
+		else
+			r = kvm_arm_default_max_vcpus();
+		break;
+	case KVM_CAP_MSI_DEVID:
+		if (!kvm)
+			r = -EINVAL;
+		else
+			r = kvm->arch.vgic.msis_require_devid;
+		break;
+	case KVM_CAP_ARM_USER_IRQ:
+		/*
+		 * 1: EL1_VTIMER, EL1_PTIMER, and PMU.
+		 * (bump this number if adding more devices)
+		 */
+		r = 1;
+		break;
+	case KVM_CAP_ARM_MTE:
+		r = system_supports_mte();
+		break;
+	case KVM_CAP_STEAL_TIME:
+		r = kvm_arm_pvtime_supported();
+		break;
+	case KVM_CAP_ARM_EL1_32BIT:
+		r = cpus_have_const_cap(ARM64_HAS_32BIT_EL1);
+		break;
+	case KVM_CAP_GUEST_DEBUG_HW_BPS:
+		r = get_num_brps();
+		break;
+	case KVM_CAP_GUEST_DEBUG_HW_WPS:
+		r = get_num_wrps();
+		break;
+	case KVM_CAP_ARM_PMU_V3:
+		r = kvm_arm_support_pmu_v3();
+		break;
+	case KVM_CAP_ARM_INJECT_SERROR_ESR:
+		r = cpus_have_const_cap(ARM64_HAS_RAS_EXTN);
+		break;
+	case KVM_CAP_ARM_VM_IPA_SIZE:
+		r = get_kvm_ipa_limit();
+		break;
+	case KVM_CAP_ARM_SVE:
+		r = system_supports_sve();
+		break;
+	case KVM_CAP_ARM_PTRAUTH_ADDRESS:
+	case KVM_CAP_ARM_PTRAUTH_GENERIC:
+		r = system_has_full_ptr_auth();
+		break;
+	case KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE:
+		if (kvm)
+			r = kvm->arch.mmu.split_page_chunk_size;
+		else
+			r = KVM_ARM_EAGER_SPLIT_CHUNK_SIZE_DEFAULT;
+		break;
+	case KVM_CAP_ARM_SUPPORTED_BLOCK_SIZES:
+		r = kvm_supported_block_sizes();
+		break;
+	default:
+		r = 0;
+	}
+
+	return r;
+}
+
+long kvm_arch_dev_ioctl(struct file *filp,
+			unsigned int ioctl, unsigned long arg)
+{
+	return -EINVAL;
+}
+
+struct kvm *kvm_arch_alloc_vm(void)
+{
+	size_t sz = sizeof(struct kvm);
+
+	if (!has_vhe())
+		return kzalloc(sz, GFP_KERNEL_ACCOUNT);
+
+	return __vmalloc(sz, GFP_KERNEL_ACCOUNT | __GFP_HIGHMEM | __GFP_ZERO);
+}
+
+int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
+{
+	if (irqchip_in_kernel(kvm) && vgic_initialized(kvm))
+		return -EBUSY;
+
+	if (id >= kvm->max_vcpus)
+		return -EINVAL;
+
+	return 0;
+}
+
+int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
+{
+	int err;
+
+	spin_lock_init(&vcpu->arch.mp_state_lock);
+
+#ifdef CONFIG_LOCKDEP
+	/* Inform lockdep that the config_lock is acquired after vcpu->mutex */
+	mutex_lock(&vcpu->mutex);
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+	mutex_unlock(&vcpu->mutex);
+#endif
+
+	/* Force users to call KVM_ARM_VCPU_INIT */
+	vcpu_clear_flag(vcpu, VCPU_INITIALIZED);
+	bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
+
+	vcpu->arch.mmu_page_cache.gfp_zero = __GFP_ZERO;
+
+	/*
+	 * Default value for the FP state, will be overloaded at load
+	 * time if we support FP (pretty likely)
+	 */
+	vcpu->arch.fp_state = FP_STATE_FREE;
+
+	/* Set up the timer */
+	kvm_timer_vcpu_init(vcpu);
+
+	kvm_pmu_vcpu_init(vcpu);
+
+	kvm_arm_reset_debug_ptr(vcpu);
+
+	kvm_arm_pvtime_vcpu_init(&vcpu->arch);
+
+	vcpu->arch.hw_mmu = &vcpu->kvm->arch.mmu;
+
+	err = kvm_vgic_vcpu_init(vcpu);
+	if (err)
+		return err;
+
+	return kvm_share_hyp(vcpu, vcpu + 1);
+}
+
+void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_has_run_once(vcpu) && unlikely(!irqchip_in_kernel(vcpu->kvm)))
+		static_branch_dec(&userspace_irqchip_in_use);
+
+	kvm_mmu_free_memory_cache(&vcpu->arch.mmu_page_cache);
+	kvm_timer_vcpu_terminate(vcpu);
+	kvm_pmu_vcpu_destroy(vcpu);
+	kvm_vgic_vcpu_destroy(vcpu);
+	kvm_arm_vcpu_destroy(vcpu);
+}
+
+void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu)
+{
+
+}
+
+void kvm_arch_vcpu_unblocking(struct kvm_vcpu *vcpu)
+{
+
+}
+
+void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+	struct kvm_s2_mmu *mmu;
+	int *last_ran;
+
+	mmu = vcpu->arch.hw_mmu;
+	last_ran = this_cpu_ptr(mmu->last_vcpu_ran);
+
+	/*
+	 * We guarantee that both TLBs and I-cache are private to each
+	 * vcpu. If detecting that a vcpu from the same VM has
+	 * previously run on the same physical CPU, call into the
+	 * hypervisor code to nuke the relevant contexts.
+	 *
+	 * We might get preempted before the vCPU actually runs, but
+	 * over-invalidation doesn't affect correctness.
+	 */
+	if (*last_ran != vcpu->vcpu_id) {
+		kvm_call_hyp(__kvm_flush_cpu_context, mmu);
+		*last_ran = vcpu->vcpu_id;
+	}
+
+	vcpu->cpu = cpu;
+
+	kvm_vgic_load(vcpu);
+	kvm_timer_vcpu_load(vcpu);
+	if (has_vhe())
+		kvm_vcpu_load_sysregs_vhe(vcpu);
+	kvm_arch_vcpu_load_fp(vcpu);
+	kvm_vcpu_pmu_restore_guest(vcpu);
+	if (kvm_arm_is_pvtime_enabled(&vcpu->arch))
+		kvm_make_request(KVM_REQ_RECORD_STEAL, vcpu);
+
+	if (single_task_running())
+		vcpu_clear_wfx_traps(vcpu);
+	else
+		vcpu_set_wfx_traps(vcpu);
+
+	if (vcpu_has_ptrauth(vcpu))
+		vcpu_ptrauth_disable(vcpu);
+	kvm_arch_vcpu_load_debug_state_flags(vcpu);
+
+	if (!cpumask_test_cpu(cpu, vcpu->kvm->arch.supported_cpus))
+		vcpu_set_on_unsupported_cpu(vcpu);
+}
+
+void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
+{
+	kvm_arch_vcpu_put_debug_state_flags(vcpu);
+	kvm_arch_vcpu_put_fp(vcpu);
+	if (has_vhe())
+		kvm_vcpu_put_sysregs_vhe(vcpu);
+	kvm_timer_vcpu_put(vcpu);
+	kvm_vgic_put(vcpu);
+	kvm_vcpu_pmu_restore_host(vcpu);
+	kvm_arm_vmid_clear_active();
+
+	vcpu_clear_on_unsupported_cpu(vcpu);
+	vcpu->cpu = -1;
+}
+
+static void __kvm_arm_vcpu_power_off(struct kvm_vcpu *vcpu)
+{
+	WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_STOPPED);
+	kvm_make_request(KVM_REQ_SLEEP, vcpu);
+	kvm_vcpu_kick(vcpu);
+}
+
+void kvm_arm_vcpu_power_off(struct kvm_vcpu *vcpu)
+{
+	spin_lock(&vcpu->arch.mp_state_lock);
+	__kvm_arm_vcpu_power_off(vcpu);
+	spin_unlock(&vcpu->arch.mp_state_lock);
+}
+
+bool kvm_arm_vcpu_stopped(struct kvm_vcpu *vcpu)
+{
+	return READ_ONCE(vcpu->arch.mp_state.mp_state) == KVM_MP_STATE_STOPPED;
+}
+
+static void kvm_arm_vcpu_suspend(struct kvm_vcpu *vcpu)
+{
+	WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_SUSPENDED);
+	kvm_make_request(KVM_REQ_SUSPEND, vcpu);
+	kvm_vcpu_kick(vcpu);
+}
+
+static bool kvm_arm_vcpu_suspended(struct kvm_vcpu *vcpu)
+{
+	return READ_ONCE(vcpu->arch.mp_state.mp_state) == KVM_MP_STATE_SUSPENDED;
+}
+
+int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
+				    struct kvm_mp_state *mp_state)
+{
+	*mp_state = READ_ONCE(vcpu->arch.mp_state);
+
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
+				    struct kvm_mp_state *mp_state)
+{
+	int ret = 0;
+
+	spin_lock(&vcpu->arch.mp_state_lock);
+
+	switch (mp_state->mp_state) {
+	case KVM_MP_STATE_RUNNABLE:
+		WRITE_ONCE(vcpu->arch.mp_state, *mp_state);
+		break;
+	case KVM_MP_STATE_STOPPED:
+		__kvm_arm_vcpu_power_off(vcpu);
+		break;
+	case KVM_MP_STATE_SUSPENDED:
+		kvm_arm_vcpu_suspend(vcpu);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock(&vcpu->arch.mp_state_lock);
+
+	return ret;
+}
+
+/**
+ * kvm_arch_vcpu_runnable - determine if the vcpu can be scheduled
+ * @v:		The VCPU pointer
+ *
+ * If the guest CPU is not waiting for interrupts or an interrupt line is
+ * asserted, the CPU is by definition runnable.
+ */
+int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
+{
+	bool irq_lines = *vcpu_hcr(v) & (HCR_VI | HCR_VF);
+	return ((irq_lines || kvm_vgic_vcpu_pending_irq(v))
+		&& !kvm_arm_vcpu_stopped(v) && !v->arch.pause);
+}
+
+bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu)
+{
+	return vcpu_mode_priv(vcpu);
+}
+
+#ifdef CONFIG_GUEST_PERF_EVENTS
+unsigned long kvm_arch_vcpu_get_ip(struct kvm_vcpu *vcpu)
+{
+	return *vcpu_pc(vcpu);
+}
+#endif
+
+static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
+{
+	return vcpu_get_flag(vcpu, VCPU_INITIALIZED);
+}
+
+/*
+ * Handle both the initialisation that is being done when the vcpu is
+ * run for the first time, as well as the updates that must be
+ * performed each time we get a new thread dealing with this vcpu.
+ */
+int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	int ret;
+
+	if (!kvm_vcpu_initialized(vcpu))
+		return -ENOEXEC;
+
+	if (!kvm_arm_vcpu_is_finalized(vcpu))
+		return -EPERM;
+
+	ret = kvm_arch_vcpu_run_map_fp(vcpu);
+	if (ret)
+		return ret;
+
+	if (likely(vcpu_has_run_once(vcpu)))
+		return 0;
+
+	kvm_arm_vcpu_init_debug(vcpu);
+
+	if (likely(irqchip_in_kernel(kvm))) {
+		/*
+		 * Map the VGIC hardware resources before running a vcpu the
+		 * first time on this VM.
+		 */
+		ret = kvm_vgic_map_resources(kvm);
+		if (ret)
+			return ret;
+	}
+
+	ret = kvm_timer_enable(vcpu);
+	if (ret)
+		return ret;
+
+	ret = kvm_arm_pmu_v3_enable(vcpu);
+	if (ret)
+		return ret;
+
+	if (is_protected_kvm_enabled()) {
+		ret = pkvm_create_hyp_vm(kvm);
+		if (ret)
+			return ret;
+	}
+
+	if (!irqchip_in_kernel(kvm)) {
+		/*
+		 * Tell the rest of the code that there are userspace irqchip
+		 * VMs in the wild.
+		 */
+		static_branch_inc(&userspace_irqchip_in_use);
+	}
+
+	/*
+	 * Initialize traps for protected VMs.
+	 * NOTE: Move to run in EL2 directly, rather than via a hypercall, once
+	 * the code is in place for first run initialization at EL2.
+	 */
+	if (kvm_vm_is_protected(kvm))
+		kvm_call_hyp_nvhe(__pkvm_vcpu_init_traps, vcpu);
+
+	mutex_lock(&kvm->arch.config_lock);
+	set_bit(KVM_ARCH_FLAG_HAS_RAN_ONCE, &kvm->arch.flags);
+	mutex_unlock(&kvm->arch.config_lock);
+
+	return ret;
+}
+
+bool kvm_arch_intc_initialized(struct kvm *kvm)
+{
+	return vgic_initialized(kvm);
+}
+
+void kvm_arm_halt_guest(struct kvm *kvm)
+{
+	unsigned long i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		vcpu->arch.pause = true;
+	kvm_make_all_cpus_request(kvm, KVM_REQ_SLEEP);
+}
+
+void kvm_arm_resume_guest(struct kvm *kvm)
+{
+	unsigned long i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		vcpu->arch.pause = false;
+		__kvm_vcpu_wake_up(vcpu);
+	}
+}
+
+static void kvm_vcpu_sleep(struct kvm_vcpu *vcpu)
+{
+	struct rcuwait *wait = kvm_arch_vcpu_get_wait(vcpu);
+
+	rcuwait_wait_event(wait,
+			   (!kvm_arm_vcpu_stopped(vcpu)) && (!vcpu->arch.pause),
+			   TASK_INTERRUPTIBLE);
+
+	if (kvm_arm_vcpu_stopped(vcpu) || vcpu->arch.pause) {
+		/* Awaken to handle a signal, request we sleep again later. */
+		kvm_make_request(KVM_REQ_SLEEP, vcpu);
+	}
+
+	/*
+	 * Make sure we will observe a potential reset request if we've
+	 * observed a change to the power state. Pairs with the smp_wmb() in
+	 * kvm_psci_vcpu_on().
+	 */
+	smp_rmb();
+}
+
+/**
+ * kvm_vcpu_wfi - emulate Wait-For-Interrupt behavior
+ * @vcpu:	The VCPU pointer
+ *
+ * Suspend execution of a vCPU until a valid wake event is detected, i.e. until
+ * the vCPU is runnable.  The vCPU may or may not be scheduled out, depending
+ * on when a wake event arrives, e.g. there may already be a pending wake event.
+ */
+void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Sync back the state of the GIC CPU interface so that we have
+	 * the latest PMR and group enables. This ensures that
+	 * kvm_arch_vcpu_runnable has up-to-date data to decide whether
+	 * we have pending interrupts, e.g. when determining if the
+	 * vCPU should block.
+	 *
+	 * For the same reason, we want to tell GICv4 that we need
+	 * doorbells to be signalled, should an interrupt become pending.
+	 */
+	preempt_disable();
+	kvm_vgic_vmcr_sync(vcpu);
+	vcpu_set_flag(vcpu, IN_WFI);
+	vgic_v4_put(vcpu);
+	preempt_enable();
+
+	kvm_vcpu_halt(vcpu);
+	vcpu_clear_flag(vcpu, IN_WFIT);
+
+	preempt_disable();
+	vcpu_clear_flag(vcpu, IN_WFI);
+	vgic_v4_load(vcpu);
+	preempt_enable();
+}
+
+static int kvm_vcpu_suspend(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_arm_vcpu_suspended(vcpu))
+		return 1;
+
+	kvm_vcpu_wfi(vcpu);
+
+	/*
+	 * The suspend state is sticky; we do not leave it until userspace
+	 * explicitly marks the vCPU as runnable. Request that we suspend again
+	 * later.
+	 */
+	kvm_make_request(KVM_REQ_SUSPEND, vcpu);
+
+	/*
+	 * Check to make sure the vCPU is actually runnable. If so, exit to
+	 * userspace informing it of the wakeup condition.
+	 */
+	if (kvm_arch_vcpu_runnable(vcpu)) {
+		memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event));
+		vcpu->run->system_event.type = KVM_SYSTEM_EVENT_WAKEUP;
+		vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
+		return 0;
+	}
+
+	/*
+	 * Otherwise, we were unblocked to process a different event, such as a
+	 * pending signal. Return 1 and allow kvm_arch_vcpu_ioctl_run() to
+	 * process the event.
+	 */
+	return 1;
+}
+
+/**
+ * check_vcpu_requests - check and handle pending vCPU requests
+ * @vcpu:	the VCPU pointer
+ *
+ * Return: 1 if we should enter the guest
+ *	   0 if we should exit to userspace
+ *	   < 0 if we should exit to userspace, where the return value indicates
+ *	   an error
+ */
+static int check_vcpu_requests(struct kvm_vcpu *vcpu)
+{
+	if (kvm_request_pending(vcpu)) {
+		if (kvm_check_request(KVM_REQ_SLEEP, vcpu))
+			kvm_vcpu_sleep(vcpu);
+
+		if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu))
+			kvm_reset_vcpu(vcpu);
+
+		/*
+		 * Clear IRQ_PENDING requests that were made to guarantee
+		 * that a VCPU sees new virtual interrupts.
+		 */
+		kvm_check_request(KVM_REQ_IRQ_PENDING, vcpu);
+
+		if (kvm_check_request(KVM_REQ_RECORD_STEAL, vcpu))
+			kvm_update_stolen_time(vcpu);
+
+		if (kvm_check_request(KVM_REQ_RELOAD_GICv4, vcpu)) {
+			/* The distributor enable bits were changed */
+			preempt_disable();
+			vgic_v4_put(vcpu);
+			vgic_v4_load(vcpu);
+			preempt_enable();
+		}
+
+		if (kvm_check_request(KVM_REQ_RELOAD_PMU, vcpu))
+			kvm_pmu_handle_pmcr(vcpu,
+					    __vcpu_sys_reg(vcpu, PMCR_EL0));
+
+		if (kvm_check_request(KVM_REQ_RESYNC_PMU_EL0, vcpu))
+			kvm_vcpu_pmu_restore_guest(vcpu);
+
+		if (kvm_check_request(KVM_REQ_SUSPEND, vcpu))
+			return kvm_vcpu_suspend(vcpu);
+
+		if (kvm_dirty_ring_check_request(vcpu))
+			return 0;
+	}
+
+	return 1;
+}
+
+static bool vcpu_mode_is_bad_32bit(struct kvm_vcpu *vcpu)
+{
+	if (likely(!vcpu_mode_is_32bit(vcpu)))
+		return false;
+
+	if (vcpu_has_nv(vcpu))
+		return true;
+
+	return !kvm_supports_32bit_el0();
+}
+
+/**
+ * kvm_vcpu_exit_request - returns true if the VCPU should *not* enter the guest
+ * @vcpu:	The VCPU pointer
+ * @ret:	Pointer to write optional return code
+ *
+ * Returns: true if the VCPU needs to return to a preemptible + interruptible
+ *	    and skip guest entry.
+ *
+ * This function disambiguates between two different types of exits: exits to a
+ * preemptible + interruptible kernel context and exits to userspace. For an
+ * exit to userspace, this function will write the return code to ret and return
+ * true. For an exit to preemptible + interruptible kernel context (i.e. check
+ * for pending work and re-enter), return true without writing to ret.
+ */
+static bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu, int *ret)
+{
+	struct kvm_run *run = vcpu->run;
+
+	/*
+	 * If we're using a userspace irqchip, then check if we need
+	 * to tell a userspace irqchip about timer or PMU level
+	 * changes and if so, exit to userspace (the actual level
+	 * state gets updated in kvm_timer_update_run and
+	 * kvm_pmu_update_run below).
+	 */
+	if (static_branch_unlikely(&userspace_irqchip_in_use)) {
+		if (kvm_timer_should_notify_user(vcpu) ||
+		    kvm_pmu_should_notify_user(vcpu)) {
+			*ret = -EINTR;
+			run->exit_reason = KVM_EXIT_INTR;
+			return true;
+		}
+	}
+
+	if (unlikely(vcpu_on_unsupported_cpu(vcpu))) {
+		run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+		run->fail_entry.hardware_entry_failure_reason = KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED;
+		run->fail_entry.cpu = smp_processor_id();
+		*ret = 0;
+		return true;
+	}
+
+	return kvm_request_pending(vcpu) ||
+			xfer_to_guest_mode_work_pending();
+}
+
+/*
+ * Actually run the vCPU, entering an RCU extended quiescent state (EQS) while
+ * the vCPU is running.
+ *
+ * This must be noinstr as instrumentation may make use of RCU, and this is not
+ * safe during the EQS.
+ */
+static int noinstr kvm_arm_vcpu_enter_exit(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	guest_state_enter_irqoff();
+	ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu);
+	guest_state_exit_irqoff();
+
+	return ret;
+}
+
+/**
+ * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
+ * @vcpu:	The VCPU pointer
+ *
+ * This function is called through the VCPU_RUN ioctl called from user space. It
+ * will execute VM code in a loop until the time slice for the process is used
+ * or some emulation is needed from user space in which case the function will
+ * return with return value 0 and with the kvm_run structure filled in with the
+ * required data for the requested emulation.
+ */
+int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
+{
+	struct kvm_run *run = vcpu->run;
+	int ret;
+
+	if (run->exit_reason == KVM_EXIT_MMIO) {
+		ret = kvm_handle_mmio_return(vcpu);
+		if (ret)
+			return ret;
+	}
+
+	vcpu_load(vcpu);
+
+	if (run->immediate_exit) {
+		ret = -EINTR;
+		goto out;
+	}
+
+	kvm_sigset_activate(vcpu);
+
+	ret = 1;
+	run->exit_reason = KVM_EXIT_UNKNOWN;
+	run->flags = 0;
+	while (ret > 0) {
+		/*
+		 * Check conditions before entering the guest
+		 */
+		ret = xfer_to_guest_mode_handle_work(vcpu);
+		if (!ret)
+			ret = 1;
+
+		if (ret > 0)
+			ret = check_vcpu_requests(vcpu);
+
+		/*
+		 * Preparing the interrupts to be injected also
+		 * involves poking the GIC, which must be done in a
+		 * non-preemptible context.
+		 */
+		preempt_disable();
+
+		/*
+		 * The VMID allocator only tracks active VMIDs per
+		 * physical CPU, and therefore the VMID allocated may not be
+		 * preserved on VMID roll-over if the task was preempted,
+		 * making a thread's VMID inactive. So we need to call
+		 * kvm_arm_vmid_update() in non-premptible context.
+		 */
+		kvm_arm_vmid_update(&vcpu->arch.hw_mmu->vmid);
+
+		kvm_pmu_flush_hwstate(vcpu);
+
+		local_irq_disable();
+
+		kvm_vgic_flush_hwstate(vcpu);
+
+		kvm_pmu_update_vcpu_events(vcpu);
+
+		/*
+		 * Ensure we set mode to IN_GUEST_MODE after we disable
+		 * interrupts and before the final VCPU requests check.
+		 * See the comment in kvm_vcpu_exiting_guest_mode() and
+		 * Documentation/virt/kvm/vcpu-requests.rst
+		 */
+		smp_store_mb(vcpu->mode, IN_GUEST_MODE);
+
+		if (ret <= 0 || kvm_vcpu_exit_request(vcpu, &ret)) {
+			vcpu->mode = OUTSIDE_GUEST_MODE;
+			isb(); /* Ensure work in x_flush_hwstate is committed */
+			kvm_pmu_sync_hwstate(vcpu);
+			if (static_branch_unlikely(&userspace_irqchip_in_use))
+				kvm_timer_sync_user(vcpu);
+			kvm_vgic_sync_hwstate(vcpu);
+			local_irq_enable();
+			preempt_enable();
+			continue;
+		}
+
+		kvm_arm_setup_debug(vcpu);
+		kvm_arch_vcpu_ctxflush_fp(vcpu);
+
+		/**************************************************************
+		 * Enter the guest
+		 */
+		trace_kvm_entry(*vcpu_pc(vcpu));
+		guest_timing_enter_irqoff();
+
+		ret = kvm_arm_vcpu_enter_exit(vcpu);
+
+		vcpu->mode = OUTSIDE_GUEST_MODE;
+		vcpu->stat.exits++;
+		/*
+		 * Back from guest
+		 *************************************************************/
+
+		kvm_arm_clear_debug(vcpu);
+
+		/*
+		 * We must sync the PMU state before the vgic state so
+		 * that the vgic can properly sample the updated state of the
+		 * interrupt line.
+		 */
+		kvm_pmu_sync_hwstate(vcpu);
+
+		/*
+		 * Sync the vgic state before syncing the timer state because
+		 * the timer code needs to know if the virtual timer
+		 * interrupts are active.
+		 */
+		kvm_vgic_sync_hwstate(vcpu);
+
+		/*
+		 * Sync the timer hardware state before enabling interrupts as
+		 * we don't want vtimer interrupts to race with syncing the
+		 * timer virtual interrupt state.
+		 */
+		if (static_branch_unlikely(&userspace_irqchip_in_use))
+			kvm_timer_sync_user(vcpu);
+
+		kvm_arch_vcpu_ctxsync_fp(vcpu);
+
+		/*
+		 * We must ensure that any pending interrupts are taken before
+		 * we exit guest timing so that timer ticks are accounted as
+		 * guest time. Transiently unmask interrupts so that any
+		 * pending interrupts are taken.
+		 *
+		 * Per ARM DDI 0487G.b section D1.13.4, an ISB (or other
+		 * context synchronization event) is necessary to ensure that
+		 * pending interrupts are taken.
+		 */
+		if (ARM_EXCEPTION_CODE(ret) == ARM_EXCEPTION_IRQ) {
+			local_irq_enable();
+			isb();
+			local_irq_disable();
+		}
+
+		guest_timing_exit_irqoff();
+
+		local_irq_enable();
+
+		trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
+
+		/* Exit types that need handling before we can be preempted */
+		handle_exit_early(vcpu, ret);
+
+		preempt_enable();
+
+		/*
+		 * The ARMv8 architecture doesn't give the hypervisor
+		 * a mechanism to prevent a guest from dropping to AArch32 EL0
+		 * if implemented by the CPU. If we spot the guest in such
+		 * state and that we decided it wasn't supposed to do so (like
+		 * with the asymmetric AArch32 case), return to userspace with
+		 * a fatal error.
+		 */
+		if (vcpu_mode_is_bad_32bit(vcpu)) {
+			/*
+			 * As we have caught the guest red-handed, decide that
+			 * it isn't fit for purpose anymore by making the vcpu
+			 * invalid. The VMM can try and fix it by issuing  a
+			 * KVM_ARM_VCPU_INIT if it really wants to.
+			 */
+			vcpu_clear_flag(vcpu, VCPU_INITIALIZED);
+			ret = ARM_EXCEPTION_IL;
+		}
+
+		ret = handle_exit(vcpu, ret);
+	}
+
+	/* Tell userspace about in-kernel device output levels */
+	if (unlikely(!irqchip_in_kernel(vcpu->kvm))) {
+		kvm_timer_update_run(vcpu);
+		kvm_pmu_update_run(vcpu);
+	}
+
+	kvm_sigset_deactivate(vcpu);
+
+out:
+	/*
+	 * In the unlikely event that we are returning to userspace
+	 * with pending exceptions or PC adjustment, commit these
+	 * adjustments in order to give userspace a consistent view of
+	 * the vcpu state. Note that this relies on __kvm_adjust_pc()
+	 * being preempt-safe on VHE.
+	 */
+	if (unlikely(vcpu_get_flag(vcpu, PENDING_EXCEPTION) ||
+		     vcpu_get_flag(vcpu, INCREMENT_PC)))
+		kvm_call_hyp(__kvm_adjust_pc, vcpu);
+
+	vcpu_put(vcpu);
+	return ret;
+}
+
+static int vcpu_interrupt_line(struct kvm_vcpu *vcpu, int number, bool level)
+{
+	int bit_index;
+	bool set;
+	unsigned long *hcr;
+
+	if (number == KVM_ARM_IRQ_CPU_IRQ)
+		bit_index = __ffs(HCR_VI);
+	else /* KVM_ARM_IRQ_CPU_FIQ */
+		bit_index = __ffs(HCR_VF);
+
+	hcr = vcpu_hcr(vcpu);
+	if (level)
+		set = test_and_set_bit(bit_index, hcr);
+	else
+		set = test_and_clear_bit(bit_index, hcr);
+
+	/*
+	 * If we didn't change anything, no need to wake up or kick other CPUs
+	 */
+	if (set == level)
+		return 0;
+
+	/*
+	 * The vcpu irq_lines field was updated, wake up sleeping VCPUs and
+	 * trigger a world-switch round on the running physical CPU to set the
+	 * virtual IRQ/FIQ fields in the HCR appropriately.
+	 */
+	kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+	kvm_vcpu_kick(vcpu);
+
+	return 0;
+}
+
+int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,
+			  bool line_status)
+{
+	u32 irq = irq_level->irq;
+	unsigned int irq_type, vcpu_idx, irq_num;
+	int nrcpus = atomic_read(&kvm->online_vcpus);
+	struct kvm_vcpu *vcpu = NULL;
+	bool level = irq_level->level;
+
+	irq_type = (irq >> KVM_ARM_IRQ_TYPE_SHIFT) & KVM_ARM_IRQ_TYPE_MASK;
+	vcpu_idx = (irq >> KVM_ARM_IRQ_VCPU_SHIFT) & KVM_ARM_IRQ_VCPU_MASK;
+	vcpu_idx += ((irq >> KVM_ARM_IRQ_VCPU2_SHIFT) & KVM_ARM_IRQ_VCPU2_MASK) * (KVM_ARM_IRQ_VCPU_MASK + 1);
+	irq_num = (irq >> KVM_ARM_IRQ_NUM_SHIFT) & KVM_ARM_IRQ_NUM_MASK;
+
+	trace_kvm_irq_line(irq_type, vcpu_idx, irq_num, irq_level->level);
+
+	switch (irq_type) {
+	case KVM_ARM_IRQ_TYPE_CPU:
+		if (irqchip_in_kernel(kvm))
+			return -ENXIO;
+
+		if (vcpu_idx >= nrcpus)
+			return -EINVAL;
+
+		vcpu = kvm_get_vcpu(kvm, vcpu_idx);
+		if (!vcpu)
+			return -EINVAL;
+
+		if (irq_num > KVM_ARM_IRQ_CPU_FIQ)
+			return -EINVAL;
+
+		return vcpu_interrupt_line(vcpu, irq_num, level);
+	case KVM_ARM_IRQ_TYPE_PPI:
+		if (!irqchip_in_kernel(kvm))
+			return -ENXIO;
+
+		if (vcpu_idx >= nrcpus)
+			return -EINVAL;
+
+		vcpu = kvm_get_vcpu(kvm, vcpu_idx);
+		if (!vcpu)
+			return -EINVAL;
+
+		if (irq_num < VGIC_NR_SGIS || irq_num >= VGIC_NR_PRIVATE_IRQS)
+			return -EINVAL;
+
+		return kvm_vgic_inject_irq(kvm, vcpu->vcpu_id, irq_num, level, NULL);
+	case KVM_ARM_IRQ_TYPE_SPI:
+		if (!irqchip_in_kernel(kvm))
+			return -ENXIO;
+
+		if (irq_num < VGIC_NR_PRIVATE_IRQS)
+			return -EINVAL;
+
+		return kvm_vgic_inject_irq(kvm, 0, irq_num, level, NULL);
+	}
+
+	return -EINVAL;
+}
+
+static int kvm_vcpu_init_check_features(struct kvm_vcpu *vcpu,
+					const struct kvm_vcpu_init *init)
+{
+	unsigned long features = init->features[0];
+	int i;
+
+	if (features & ~KVM_VCPU_VALID_FEATURES)
+		return -ENOENT;
+
+	for (i = 1; i < ARRAY_SIZE(init->features); i++) {
+		if (init->features[i])
+			return -ENOENT;
+	}
+
+	if (!test_bit(KVM_ARM_VCPU_EL1_32BIT, &features))
+		return 0;
+
+	if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1))
+		return -EINVAL;
+
+	/* MTE is incompatible with AArch32 */
+	if (kvm_has_mte(vcpu->kvm))
+		return -EINVAL;
+
+	/* NV is incompatible with AArch32 */
+	if (test_bit(KVM_ARM_VCPU_HAS_EL2, &features))
+		return -EINVAL;
+
+	return 0;
+}
+
+static bool kvm_vcpu_init_changed(struct kvm_vcpu *vcpu,
+				  const struct kvm_vcpu_init *init)
+{
+	unsigned long features = init->features[0];
+
+	return !bitmap_equal(vcpu->arch.features, &features, KVM_VCPU_MAX_FEATURES);
+}
+
+static int __kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
+				 const struct kvm_vcpu_init *init)
+{
+	unsigned long features = init->features[0];
+	struct kvm *kvm = vcpu->kvm;
+	int ret = -EINVAL;
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (test_bit(KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED, &kvm->arch.flags) &&
+	    !bitmap_equal(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES))
+		goto out_unlock;
+
+	bitmap_copy(vcpu->arch.features, &features, KVM_VCPU_MAX_FEATURES);
+
+	/* Now we know what it is, we can reset it. */
+	ret = kvm_reset_vcpu(vcpu);
+	if (ret) {
+		bitmap_zero(vcpu->arch.features, KVM_VCPU_MAX_FEATURES);
+		goto out_unlock;
+	}
+
+	bitmap_copy(kvm->arch.vcpu_features, &features, KVM_VCPU_MAX_FEATURES);
+	set_bit(KVM_ARCH_FLAG_VCPU_FEATURES_CONFIGURED, &kvm->arch.flags);
+	vcpu_set_flag(vcpu, VCPU_INITIALIZED);
+out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
+	return ret;
+}
+
+static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
+			       const struct kvm_vcpu_init *init)
+{
+	int ret;
+
+	if (init->target != KVM_ARM_TARGET_GENERIC_V8 &&
+	    init->target != kvm_target_cpu())
+		return -EINVAL;
+
+	ret = kvm_vcpu_init_check_features(vcpu, init);
+	if (ret)
+		return ret;
+
+	if (!kvm_vcpu_initialized(vcpu))
+		return __kvm_vcpu_set_target(vcpu, init);
+
+	if (kvm_vcpu_init_changed(vcpu, init))
+		return -EINVAL;
+
+	return kvm_reset_vcpu(vcpu);
+}
+
+static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
+					 struct kvm_vcpu_init *init)
+{
+	bool power_off = false;
+	int ret;
+
+	/*
+	 * Treat the power-off vCPU feature as ephemeral. Clear the bit to avoid
+	 * reflecting it in the finalized feature set, thus limiting its scope
+	 * to a single KVM_ARM_VCPU_INIT call.
+	 */
+	if (init->features[0] & BIT(KVM_ARM_VCPU_POWER_OFF)) {
+		init->features[0] &= ~BIT(KVM_ARM_VCPU_POWER_OFF);
+		power_off = true;
+	}
+
+	ret = kvm_vcpu_set_target(vcpu, init);
+	if (ret)
+		return ret;
+
+	/*
+	 * Ensure a rebooted VM will fault in RAM pages and detect if the
+	 * guest MMU is turned off and flush the caches as needed.
+	 *
+	 * S2FWB enforces all memory accesses to RAM being cacheable,
+	 * ensuring that the data side is always coherent. We still
+	 * need to invalidate the I-cache though, as FWB does *not*
+	 * imply CTR_EL0.DIC.
+	 */
+	if (vcpu_has_run_once(vcpu)) {
+		if (!cpus_have_final_cap(ARM64_HAS_STAGE2_FWB))
+			stage2_unmap_vm(vcpu->kvm);
+		else
+			icache_inval_all_pou();
+	}
+
+	vcpu_reset_hcr(vcpu);
+	vcpu->arch.cptr_el2 = kvm_get_reset_cptr_el2(vcpu);
+
+	/*
+	 * Handle the "start in power-off" case.
+	 */
+	spin_lock(&vcpu->arch.mp_state_lock);
+
+	if (power_off)
+		__kvm_arm_vcpu_power_off(vcpu);
+	else
+		WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_RUNNABLE);
+
+	spin_unlock(&vcpu->arch.mp_state_lock);
+
+	return 0;
+}
+
+static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
+				   struct kvm_vcpu_events *events)
+{
+	memset(events, 0, sizeof(*events));
+
+	return __kvm_arm_vcpu_get_events(vcpu, events);
+}
+
+static int kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
+				   struct kvm_vcpu_events *events)
+{
+	int i;
+
+	/* check whether the reserved field is zero */
+	for (i = 0; i < ARRAY_SIZE(events->reserved); i++)
+		if (events->reserved[i])
+			return -EINVAL;
+
+	/* check whether the pad field is zero */
+	for (i = 0; i < ARRAY_SIZE(events->exception.pad); i++)
+		if (events->exception.pad[i])
+			return -EINVAL;
+
+	return __kvm_arm_vcpu_set_events(vcpu, events);
+}
+
+long kvm_arch_vcpu_ioctl(struct file *filp,
+			 unsigned int ioctl, unsigned long arg)
+{
+	struct kvm_vcpu *vcpu = filp->private_data;
+	void __user *argp = (void __user *)arg;
+	struct kvm_device_attr attr;
+	long r;
+
+	switch (ioctl) {
+	case KVM_ARM_VCPU_INIT: {
+		struct kvm_vcpu_init init;
+
+		r = -EFAULT;
+		if (copy_from_user(&init, argp, sizeof(init)))
+			break;
+
+		r = kvm_arch_vcpu_ioctl_vcpu_init(vcpu, &init);
+		break;
+	}
+	case KVM_SET_ONE_REG:
+	case KVM_GET_ONE_REG: {
+		struct kvm_one_reg reg;
+
+		r = -ENOEXEC;
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			break;
+
+		r = -EFAULT;
+		if (copy_from_user(&reg, argp, sizeof(reg)))
+			break;
+
+		/*
+		 * We could owe a reset due to PSCI. Handle the pending reset
+		 * here to ensure userspace register accesses are ordered after
+		 * the reset.
+		 */
+		if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu))
+			kvm_reset_vcpu(vcpu);
+
+		if (ioctl == KVM_SET_ONE_REG)
+			r = kvm_arm_set_reg(vcpu, &reg);
+		else
+			r = kvm_arm_get_reg(vcpu, &reg);
+		break;
+	}
+	case KVM_GET_REG_LIST: {
+		struct kvm_reg_list __user *user_list = argp;
+		struct kvm_reg_list reg_list;
+		unsigned n;
+
+		r = -ENOEXEC;
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			break;
+
+		r = -EPERM;
+		if (!kvm_arm_vcpu_is_finalized(vcpu))
+			break;
+
+		r = -EFAULT;
+		if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
+			break;
+		n = reg_list.n;
+		reg_list.n = kvm_arm_num_regs(vcpu);
+		if (copy_to_user(user_list, &reg_list, sizeof(reg_list)))
+			break;
+		r = -E2BIG;
+		if (n < reg_list.n)
+			break;
+		r = kvm_arm_copy_reg_indices(vcpu, user_list->reg);
+		break;
+	}
+	case KVM_SET_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_arm_vcpu_set_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_GET_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_arm_vcpu_get_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_HAS_DEVICE_ATTR: {
+		r = -EFAULT;
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			break;
+		r = kvm_arm_vcpu_has_attr(vcpu, &attr);
+		break;
+	}
+	case KVM_GET_VCPU_EVENTS: {
+		struct kvm_vcpu_events events;
+
+		if (kvm_arm_vcpu_get_events(vcpu, &events))
+			return -EINVAL;
+
+		if (copy_to_user(argp, &events, sizeof(events)))
+			return -EFAULT;
+
+		return 0;
+	}
+	case KVM_SET_VCPU_EVENTS: {
+		struct kvm_vcpu_events events;
+
+		if (copy_from_user(&events, argp, sizeof(events)))
+			return -EFAULT;
+
+		return kvm_arm_vcpu_set_events(vcpu, &events);
+	}
+	case KVM_ARM_VCPU_FINALIZE: {
+		int what;
+
+		if (!kvm_vcpu_initialized(vcpu))
+			return -ENOEXEC;
+
+		if (get_user(what, (const int __user *)argp))
+			return -EFAULT;
+
+		return kvm_arm_vcpu_finalize(vcpu, what);
+	}
+	default:
+		r = -EINVAL;
+	}
+
+	return r;
+}
+
+void kvm_arch_sync_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot)
+{
+
+}
+
+static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
+					struct kvm_arm_device_addr *dev_addr)
+{
+	switch (FIELD_GET(KVM_ARM_DEVICE_ID_MASK, dev_addr->id)) {
+	case KVM_ARM_DEVICE_VGIC_V2:
+		if (!vgic_present)
+			return -ENXIO;
+		return kvm_set_legacy_vgic_v2_addr(kvm, dev_addr);
+	default:
+		return -ENODEV;
+	}
+}
+
+static int kvm_vm_has_attr(struct kvm *kvm, struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_ARM_VM_SMCCC_CTRL:
+		return kvm_vm_smccc_has_attr(kvm, attr);
+	default:
+		return -ENXIO;
+	}
+}
+
+static int kvm_vm_set_attr(struct kvm *kvm, struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_ARM_VM_SMCCC_CTRL:
+		return kvm_vm_smccc_set_attr(kvm, attr);
+	default:
+		return -ENXIO;
+	}
+}
+
+int kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg)
+{
+	struct kvm *kvm = filp->private_data;
+	void __user *argp = (void __user *)arg;
+	struct kvm_device_attr attr;
+
+	switch (ioctl) {
+	case KVM_CREATE_IRQCHIP: {
+		int ret;
+		if (!vgic_present)
+			return -ENXIO;
+		mutex_lock(&kvm->lock);
+		ret = kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		mutex_unlock(&kvm->lock);
+		return ret;
+	}
+	case KVM_ARM_SET_DEVICE_ADDR: {
+		struct kvm_arm_device_addr dev_addr;
+
+		if (copy_from_user(&dev_addr, argp, sizeof(dev_addr)))
+			return -EFAULT;
+		return kvm_vm_ioctl_set_device_addr(kvm, &dev_addr);
+	}
+	case KVM_ARM_PREFERRED_TARGET: {
+		struct kvm_vcpu_init init = {
+			.target = KVM_ARM_TARGET_GENERIC_V8,
+		};
+
+		if (copy_to_user(argp, &init, sizeof(init)))
+			return -EFAULT;
+
+		return 0;
+	}
+	case KVM_ARM_MTE_COPY_TAGS: {
+		struct kvm_arm_copy_mte_tags copy_tags;
+
+		if (copy_from_user(&copy_tags, argp, sizeof(copy_tags)))
+			return -EFAULT;
+		return kvm_vm_ioctl_mte_copy_tags(kvm, &copy_tags);
+	}
+	case KVM_ARM_SET_COUNTER_OFFSET: {
+		struct kvm_arm_counter_offset offset;
+
+		if (copy_from_user(&offset, argp, sizeof(offset)))
+			return -EFAULT;
+		return kvm_vm_ioctl_set_counter_offset(kvm, &offset);
+	}
+	case KVM_HAS_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+
+		return kvm_vm_has_attr(kvm, &attr);
+	}
+	case KVM_SET_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+
+		return kvm_vm_set_attr(kvm, &attr);
+	}
+	default:
+		return -EINVAL;
+	}
+}
+
+/* unlocks vcpus from @vcpu_lock_idx and smaller */
+static void unlock_vcpus(struct kvm *kvm, int vcpu_lock_idx)
+{
+	struct kvm_vcpu *tmp_vcpu;
+
+	for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
+		tmp_vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
+		mutex_unlock(&tmp_vcpu->mutex);
+	}
+}
+
+void unlock_all_vcpus(struct kvm *kvm)
+{
+	lockdep_assert_held(&kvm->lock);
+
+	unlock_vcpus(kvm, atomic_read(&kvm->online_vcpus) - 1);
+}
+
+/* Returns true if all vcpus were locked, false otherwise */
+bool lock_all_vcpus(struct kvm *kvm)
+{
+	struct kvm_vcpu *tmp_vcpu;
+	unsigned long c;
+
+	lockdep_assert_held(&kvm->lock);
+
+	/*
+	 * Any time a vcpu is in an ioctl (including running), the
+	 * core KVM code tries to grab the vcpu->mutex.
+	 *
+	 * By grabbing the vcpu->mutex of all VCPUs we ensure that no
+	 * other VCPUs can fiddle with the state while we access it.
+	 */
+	kvm_for_each_vcpu(c, tmp_vcpu, kvm) {
+		if (!mutex_trylock(&tmp_vcpu->mutex)) {
+			unlock_vcpus(kvm, c - 1);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static unsigned long nvhe_percpu_size(void)
+{
+	return (unsigned long)CHOOSE_NVHE_SYM(__per_cpu_end) -
+		(unsigned long)CHOOSE_NVHE_SYM(__per_cpu_start);
+}
+
+static unsigned long nvhe_percpu_order(void)
+{
+	unsigned long size = nvhe_percpu_size();
+
+	return size ? get_order(size) : 0;
+}
+
+/* A lookup table holding the hypervisor VA for each vector slot */
+static void *hyp_spectre_vector_selector[BP_HARDEN_EL2_SLOTS];
+
+static void kvm_init_vector_slot(void *base, enum arm64_hyp_spectre_vector slot)
+{
+	hyp_spectre_vector_selector[slot] = __kvm_vector_slot2addr(base, slot);
+}
+
+static int kvm_init_vector_slots(void)
+{
+	int err;
+	void *base;
+
+	base = kern_hyp_va(kvm_ksym_ref(__kvm_hyp_vector));
+	kvm_init_vector_slot(base, HYP_VECTOR_DIRECT);
+
+	base = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs));
+	kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_DIRECT);
+
+	if (kvm_system_needs_idmapped_vectors() &&
+	    !is_protected_kvm_enabled()) {
+		err = create_hyp_exec_mappings(__pa_symbol(__bp_harden_hyp_vecs),
+					       __BP_HARDEN_HYP_VECS_SZ, &base);
+		if (err)
+			return err;
+	}
+
+	kvm_init_vector_slot(base, HYP_VECTOR_INDIRECT);
+	kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_INDIRECT);
+	return 0;
+}
+
+static void __init cpu_prepare_hyp_mode(int cpu, u32 hyp_va_bits)
+{
+	struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
+	unsigned long tcr;
+
+	/*
+	 * Calculate the raw per-cpu offset without a translation from the
+	 * kernel's mapping to the linear mapping, and store it in tpidr_el2
+	 * so that we can use adr_l to access per-cpu variables in EL2.
+	 * Also drop the KASAN tag which gets in the way...
+	 */
+	params->tpidr_el2 = (unsigned long)kasan_reset_tag(per_cpu_ptr_nvhe_sym(__per_cpu_start, cpu)) -
+			    (unsigned long)kvm_ksym_ref(CHOOSE_NVHE_SYM(__per_cpu_start));
+
+	params->mair_el2 = read_sysreg(mair_el1);
+
+	tcr = read_sysreg(tcr_el1);
+	if (cpus_have_final_cap(ARM64_KVM_HVHE)) {
+		tcr |= TCR_EPD1_MASK;
+	} else {
+		tcr &= TCR_EL2_MASK;
+		tcr |= TCR_EL2_RES1;
+	}
+	tcr &= ~TCR_T0SZ_MASK;
+	tcr |= TCR_T0SZ(hyp_va_bits);
+	params->tcr_el2 = tcr;
+
+	params->pgd_pa = kvm_mmu_get_httbr();
+	if (is_protected_kvm_enabled())
+		params->hcr_el2 = HCR_HOST_NVHE_PROTECTED_FLAGS;
+	else
+		params->hcr_el2 = HCR_HOST_NVHE_FLAGS;
+	if (cpus_have_final_cap(ARM64_KVM_HVHE))
+		params->hcr_el2 |= HCR_E2H;
+	params->vttbr = params->vtcr = 0;
+
+	/*
+	 * Flush the init params from the data cache because the struct will
+	 * be read while the MMU is off.
+	 */
+	kvm_flush_dcache_to_poc(params, sizeof(*params));
+}
+
+static void hyp_install_host_vector(void)
+{
+	struct kvm_nvhe_init_params *params;
+	struct arm_smccc_res res;
+
+	/* Switch from the HYP stub to our own HYP init vector */
+	__hyp_set_vectors(kvm_get_idmap_vector());
+
+	/*
+	 * Call initialization code, and switch to the full blown HYP code.
+	 * If the cpucaps haven't been finalized yet, something has gone very
+	 * wrong, and hyp will crash and burn when it uses any
+	 * cpus_have_const_cap() wrapper.
+	 */
+	BUG_ON(!system_capabilities_finalized());
+	params = this_cpu_ptr_nvhe_sym(kvm_init_params);
+	arm_smccc_1_1_hvc(KVM_HOST_SMCCC_FUNC(__kvm_hyp_init), virt_to_phys(params), &res);
+	WARN_ON(res.a0 != SMCCC_RET_SUCCESS);
+}
+
+static void cpu_init_hyp_mode(void)
+{
+	hyp_install_host_vector();
+
+	/*
+	 * Disabling SSBD on a non-VHE system requires us to enable SSBS
+	 * at EL2.
+	 */
+	if (this_cpu_has_cap(ARM64_SSBS) &&
+	    arm64_get_spectre_v4_state() == SPECTRE_VULNERABLE) {
+		kvm_call_hyp_nvhe(__kvm_enable_ssbs);
+	}
+}
+
+static void cpu_hyp_reset(void)
+{
+	if (!is_kernel_in_hyp_mode())
+		__hyp_reset_vectors();
+}
+
+/*
+ * EL2 vectors can be mapped and rerouted in a number of ways,
+ * depending on the kernel configuration and CPU present:
+ *
+ * - If the CPU is affected by Spectre-v2, the hardening sequence is
+ *   placed in one of the vector slots, which is executed before jumping
+ *   to the real vectors.
+ *
+ * - If the CPU also has the ARM64_SPECTRE_V3A cap, the slot
+ *   containing the hardening sequence is mapped next to the idmap page,
+ *   and executed before jumping to the real vectors.
+ *
+ * - If the CPU only has the ARM64_SPECTRE_V3A cap, then an
+ *   empty slot is selected, mapped next to the idmap page, and
+ *   executed before jumping to the real vectors.
+ *
+ * Note that ARM64_SPECTRE_V3A is somewhat incompatible with
+ * VHE, as we don't have hypervisor-specific mappings. If the system
+ * is VHE and yet selects this capability, it will be ignored.
+ */
+static void cpu_set_hyp_vector(void)
+{
+	struct bp_hardening_data *data = this_cpu_ptr(&bp_hardening_data);
+	void *vector = hyp_spectre_vector_selector[data->slot];
+
+	if (!is_protected_kvm_enabled())
+		*this_cpu_ptr_hyp_sym(kvm_hyp_vector) = (unsigned long)vector;
+	else
+		kvm_call_hyp_nvhe(__pkvm_cpu_set_vector, data->slot);
+}
+
+static void cpu_hyp_init_context(void)
+{
+	kvm_init_host_cpu_context(&this_cpu_ptr_hyp_sym(kvm_host_data)->host_ctxt);
+
+	if (!is_kernel_in_hyp_mode())
+		cpu_init_hyp_mode();
+}
+
+static void cpu_hyp_init_features(void)
+{
+	cpu_set_hyp_vector();
+	kvm_arm_init_debug();
+
+	if (is_kernel_in_hyp_mode())
+		kvm_timer_init_vhe();
+
+	if (vgic_present)
+		kvm_vgic_init_cpu_hardware();
+}
+
+static void cpu_hyp_reinit(void)
+{
+	cpu_hyp_reset();
+	cpu_hyp_init_context();
+	cpu_hyp_init_features();
+}
+
+static void cpu_hyp_init(void *discard)
+{
+	if (!__this_cpu_read(kvm_hyp_initialized)) {
+		cpu_hyp_reinit();
+		__this_cpu_write(kvm_hyp_initialized, 1);
+	}
+}
+
+static void cpu_hyp_uninit(void *discard)
+{
+	if (__this_cpu_read(kvm_hyp_initialized)) {
+		cpu_hyp_reset();
+		__this_cpu_write(kvm_hyp_initialized, 0);
+	}
+}
+
+int kvm_arch_hardware_enable(void)
+{
+	/*
+	 * Most calls to this function are made with migration
+	 * disabled, but not with preemption disabled. The former is
+	 * enough to ensure correctness, but most of the helpers
+	 * expect the later and will throw a tantrum otherwise.
+	 */
+	preempt_disable();
+
+	cpu_hyp_init(NULL);
+
+	kvm_vgic_cpu_up();
+	kvm_timer_cpu_up();
+
+	preempt_enable();
+
+	return 0;
+}
+
+void kvm_arch_hardware_disable(void)
+{
+	kvm_timer_cpu_down();
+	kvm_vgic_cpu_down();
+
+	if (!is_protected_kvm_enabled())
+		cpu_hyp_uninit(NULL);
+}
+
+#ifdef CONFIG_CPU_PM
+static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
+				    unsigned long cmd,
+				    void *v)
+{
+	/*
+	 * kvm_hyp_initialized is left with its old value over
+	 * PM_ENTER->PM_EXIT. It is used to indicate PM_EXIT should
+	 * re-enable hyp.
+	 */
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		if (__this_cpu_read(kvm_hyp_initialized))
+			/*
+			 * don't update kvm_hyp_initialized here
+			 * so that the hyp will be re-enabled
+			 * when we resume. See below.
+			 */
+			cpu_hyp_reset();
+
+		return NOTIFY_OK;
+	case CPU_PM_ENTER_FAILED:
+	case CPU_PM_EXIT:
+		if (__this_cpu_read(kvm_hyp_initialized))
+			/* The hyp was enabled before suspend. */
+			cpu_hyp_reinit();
+
+		return NOTIFY_OK;
+
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block hyp_init_cpu_pm_nb = {
+	.notifier_call = hyp_init_cpu_pm_notifier,
+};
+
+static void __init hyp_cpu_pm_init(void)
+{
+	if (!is_protected_kvm_enabled())
+		cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
+}
+static void __init hyp_cpu_pm_exit(void)
+{
+	if (!is_protected_kvm_enabled())
+		cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
+}
+#else
+static inline void __init hyp_cpu_pm_init(void)
+{
+}
+static inline void __init hyp_cpu_pm_exit(void)
+{
+}
+#endif
+
+static void __init init_cpu_logical_map(void)
+{
+	unsigned int cpu;
+
+	/*
+	 * Copy the MPIDR <-> logical CPU ID mapping to hyp.
+	 * Only copy the set of online CPUs whose features have been checked
+	 * against the finalized system capabilities. The hypervisor will not
+	 * allow any other CPUs from the `possible` set to boot.
+	 */
+	for_each_online_cpu(cpu)
+		hyp_cpu_logical_map[cpu] = cpu_logical_map(cpu);
+}
+
+#define init_psci_0_1_impl_state(config, what)	\
+	config.psci_0_1_ ## what ## _implemented = psci_ops.what
+
+static bool __init init_psci_relay(void)
+{
+	/*
+	 * If PSCI has not been initialized, protected KVM cannot install
+	 * itself on newly booted CPUs.
+	 */
+	if (!psci_ops.get_version) {
+		kvm_err("Cannot initialize protected mode without PSCI\n");
+		return false;
+	}
+
+	kvm_host_psci_config.version = psci_ops.get_version();
+	kvm_host_psci_config.smccc_version = arm_smccc_get_version();
+
+	if (kvm_host_psci_config.version == PSCI_VERSION(0, 1)) {
+		kvm_host_psci_config.function_ids_0_1 = get_psci_0_1_function_ids();
+		init_psci_0_1_impl_state(kvm_host_psci_config, cpu_suspend);
+		init_psci_0_1_impl_state(kvm_host_psci_config, cpu_on);
+		init_psci_0_1_impl_state(kvm_host_psci_config, cpu_off);
+		init_psci_0_1_impl_state(kvm_host_psci_config, migrate);
+	}
+	return true;
+}
+
+static int __init init_subsystems(void)
+{
+	int err = 0;
+
+	/*
+	 * Enable hardware so that subsystem initialisation can access EL2.
+	 */
+	on_each_cpu(cpu_hyp_init, NULL, 1);
+
+	/*
+	 * Register CPU lower-power notifier
+	 */
+	hyp_cpu_pm_init();
+
+	/*
+	 * Init HYP view of VGIC
+	 */
+	err = kvm_vgic_hyp_init();
+	switch (err) {
+	case 0:
+		vgic_present = true;
+		break;
+	case -ENODEV:
+	case -ENXIO:
+		vgic_present = false;
+		err = 0;
+		break;
+	default:
+		goto out;
+	}
+
+	/*
+	 * Init HYP architected timer support
+	 */
+	err = kvm_timer_hyp_init(vgic_present);
+	if (err)
+		goto out;
+
+	kvm_register_perf_callbacks(NULL);
+
+out:
+	if (err)
+		hyp_cpu_pm_exit();
+
+	if (err || !is_protected_kvm_enabled())
+		on_each_cpu(cpu_hyp_uninit, NULL, 1);
+
+	return err;
+}
+
+static void __init teardown_subsystems(void)
+{
+	kvm_unregister_perf_callbacks();
+	hyp_cpu_pm_exit();
+}
+
+static void __init teardown_hyp_mode(void)
+{
+	int cpu;
+
+	free_hyp_pgds();
+	for_each_possible_cpu(cpu) {
+		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+		free_pages(kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu], nvhe_percpu_order());
+	}
+}
+
+static int __init do_pkvm_init(u32 hyp_va_bits)
+{
+	void *per_cpu_base = kvm_ksym_ref(kvm_nvhe_sym(kvm_arm_hyp_percpu_base));
+	int ret;
+
+	preempt_disable();
+	cpu_hyp_init_context();
+	ret = kvm_call_hyp_nvhe(__pkvm_init, hyp_mem_base, hyp_mem_size,
+				num_possible_cpus(), kern_hyp_va(per_cpu_base),
+				hyp_va_bits);
+	cpu_hyp_init_features();
+
+	/*
+	 * The stub hypercalls are now disabled, so set our local flag to
+	 * prevent a later re-init attempt in kvm_arch_hardware_enable().
+	 */
+	__this_cpu_write(kvm_hyp_initialized, 1);
+	preempt_enable();
+
+	return ret;
+}
+
+static u64 get_hyp_id_aa64pfr0_el1(void)
+{
+	/*
+	 * Track whether the system isn't affected by spectre/meltdown in the
+	 * hypervisor's view of id_aa64pfr0_el1, used for protected VMs.
+	 * Although this is per-CPU, we make it global for simplicity, e.g., not
+	 * to have to worry about vcpu migration.
+	 *
+	 * Unlike for non-protected VMs, userspace cannot override this for
+	 * protected VMs.
+	 */
+	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) |
+		 ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3));
+
+	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
+			  arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED);
+	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
+			  arm64_get_meltdown_state() == SPECTRE_UNAFFECTED);
+
+	return val;
+}
+
+static void kvm_hyp_init_symbols(void)
+{
+	kvm_nvhe_sym(id_aa64pfr0_el1_sys_val) = get_hyp_id_aa64pfr0_el1();
+	kvm_nvhe_sym(id_aa64pfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
+	kvm_nvhe_sym(id_aa64isar0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR0_EL1);
+	kvm_nvhe_sym(id_aa64isar1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR1_EL1);
+	kvm_nvhe_sym(id_aa64isar2_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
+	kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR2_EL1);
+	kvm_nvhe_sym(id_aa64smfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64SMFR0_EL1);
+	kvm_nvhe_sym(__icache_flags) = __icache_flags;
+	kvm_nvhe_sym(kvm_arm_vmid_bits) = kvm_arm_vmid_bits;
+}
+
+static int __init kvm_hyp_init_protection(u32 hyp_va_bits)
+{
+	void *addr = phys_to_virt(hyp_mem_base);
+	int ret;
+
+	ret = create_hyp_mappings(addr, addr + hyp_mem_size, PAGE_HYP);
+	if (ret)
+		return ret;
+
+	ret = do_pkvm_init(hyp_va_bits);
+	if (ret)
+		return ret;
+
+	free_hyp_pgds();
+
+	return 0;
+}
+
+static void pkvm_hyp_init_ptrauth(void)
+{
+	struct kvm_cpu_context *hyp_ctxt;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		hyp_ctxt = per_cpu_ptr_nvhe_sym(kvm_hyp_ctxt, cpu);
+		hyp_ctxt->sys_regs[APIAKEYLO_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APIAKEYHI_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APIBKEYLO_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APIBKEYHI_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APDAKEYLO_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APDAKEYHI_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APDBKEYLO_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APDBKEYHI_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APGAKEYLO_EL1] = get_random_long();
+		hyp_ctxt->sys_regs[APGAKEYHI_EL1] = get_random_long();
+	}
+}
+
+/* Inits Hyp-mode on all online CPUs */
+static int __init init_hyp_mode(void)
+{
+	u32 hyp_va_bits;
+	int cpu;
+	int err = -ENOMEM;
+
+	/*
+	 * The protected Hyp-mode cannot be initialized if the memory pool
+	 * allocation has failed.
+	 */
+	if (is_protected_kvm_enabled() && !hyp_mem_base)
+		goto out_err;
+
+	/*
+	 * Allocate Hyp PGD and setup Hyp identity mapping
+	 */
+	err = kvm_mmu_init(&hyp_va_bits);
+	if (err)
+		goto out_err;
+
+	/*
+	 * Allocate stack pages for Hypervisor-mode
+	 */
+	for_each_possible_cpu(cpu) {
+		unsigned long stack_page;
+
+		stack_page = __get_free_page(GFP_KERNEL);
+		if (!stack_page) {
+			err = -ENOMEM;
+			goto out_err;
+		}
+
+		per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
+	}
+
+	/*
+	 * Allocate and initialize pages for Hypervisor-mode percpu regions.
+	 */
+	for_each_possible_cpu(cpu) {
+		struct page *page;
+		void *page_addr;
+
+		page = alloc_pages(GFP_KERNEL, nvhe_percpu_order());
+		if (!page) {
+			err = -ENOMEM;
+			goto out_err;
+		}
+
+		page_addr = page_address(page);
+		memcpy(page_addr, CHOOSE_NVHE_SYM(__per_cpu_start), nvhe_percpu_size());
+		kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu] = (unsigned long)page_addr;
+	}
+
+	/*
+	 * Map the Hyp-code called directly from the host
+	 */
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start),
+				  kvm_ksym_ref(__hyp_text_end), PAGE_HYP_EXEC);
+	if (err) {
+		kvm_err("Cannot map world-switch code\n");
+		goto out_err;
+	}
+
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_rodata_start),
+				  kvm_ksym_ref(__hyp_rodata_end), PAGE_HYP_RO);
+	if (err) {
+		kvm_err("Cannot map .hyp.rodata section\n");
+		goto out_err;
+	}
+
+	err = create_hyp_mappings(kvm_ksym_ref(__start_rodata),
+				  kvm_ksym_ref(__end_rodata), PAGE_HYP_RO);
+	if (err) {
+		kvm_err("Cannot map rodata section\n");
+		goto out_err;
+	}
+
+	/*
+	 * .hyp.bss is guaranteed to be placed at the beginning of the .bss
+	 * section thanks to an assertion in the linker script. Map it RW and
+	 * the rest of .bss RO.
+	 */
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_bss_start),
+				  kvm_ksym_ref(__hyp_bss_end), PAGE_HYP);
+	if (err) {
+		kvm_err("Cannot map hyp bss section: %d\n", err);
+		goto out_err;
+	}
+
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_bss_end),
+				  kvm_ksym_ref(__bss_stop), PAGE_HYP_RO);
+	if (err) {
+		kvm_err("Cannot map bss section\n");
+		goto out_err;
+	}
+
+	/*
+	 * Map the Hyp stack pages
+	 */
+	for_each_possible_cpu(cpu) {
+		struct kvm_nvhe_init_params *params = per_cpu_ptr_nvhe_sym(kvm_init_params, cpu);
+		char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
+
+		err = create_hyp_stack(__pa(stack_page), &params->stack_hyp_va);
+		if (err) {
+			kvm_err("Cannot map hyp stack\n");
+			goto out_err;
+		}
+
+		/*
+		 * Save the stack PA in nvhe_init_params. This will be needed
+		 * to recreate the stack mapping in protected nVHE mode.
+		 * __hyp_pa() won't do the right thing there, since the stack
+		 * has been mapped in the flexible private VA space.
+		 */
+		params->stack_pa = __pa(stack_page);
+	}
+
+	for_each_possible_cpu(cpu) {
+		char *percpu_begin = (char *)kvm_nvhe_sym(kvm_arm_hyp_percpu_base)[cpu];
+		char *percpu_end = percpu_begin + nvhe_percpu_size();
+
+		/* Map Hyp percpu pages */
+		err = create_hyp_mappings(percpu_begin, percpu_end, PAGE_HYP);
+		if (err) {
+			kvm_err("Cannot map hyp percpu region\n");
+			goto out_err;
+		}
+
+		/* Prepare the CPU initialization parameters */
+		cpu_prepare_hyp_mode(cpu, hyp_va_bits);
+	}
+
+	kvm_hyp_init_symbols();
+
+	if (is_protected_kvm_enabled()) {
+		if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL) &&
+		    cpus_have_const_cap(ARM64_HAS_ADDRESS_AUTH))
+			pkvm_hyp_init_ptrauth();
+
+		init_cpu_logical_map();
+
+		if (!init_psci_relay()) {
+			err = -ENODEV;
+			goto out_err;
+		}
+
+		err = kvm_hyp_init_protection(hyp_va_bits);
+		if (err) {
+			kvm_err("Failed to init hyp memory protection\n");
+			goto out_err;
+		}
+	}
+
+	return 0;
+
+out_err:
+	teardown_hyp_mode();
+	kvm_err("error initializing Hyp mode: %d\n", err);
+	return err;
+}
+
+struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	mpidr &= MPIDR_HWID_BITMASK;
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (mpidr == kvm_vcpu_get_mpidr_aff(vcpu))
+			return vcpu;
+	}
+	return NULL;
+}
+
+bool kvm_arch_irqchip_in_kernel(struct kvm *kvm)
+{
+	return irqchip_in_kernel(kvm);
+}
+
+bool kvm_arch_has_irq_bypass(void)
+{
+	return true;
+}
+
+int kvm_arch_irq_bypass_add_producer(struct irq_bypass_consumer *cons,
+				      struct irq_bypass_producer *prod)
+{
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+	return kvm_vgic_v4_set_forwarding(irqfd->kvm, prod->irq,
+					  &irqfd->irq_entry);
+}
+void kvm_arch_irq_bypass_del_producer(struct irq_bypass_consumer *cons,
+				      struct irq_bypass_producer *prod)
+{
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+	kvm_vgic_v4_unset_forwarding(irqfd->kvm, prod->irq,
+				     &irqfd->irq_entry);
+}
+
+void kvm_arch_irq_bypass_stop(struct irq_bypass_consumer *cons)
+{
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+	kvm_arm_halt_guest(irqfd->kvm);
+}
+
+void kvm_arch_irq_bypass_start(struct irq_bypass_consumer *cons)
+{
+	struct kvm_kernel_irqfd *irqfd =
+		container_of(cons, struct kvm_kernel_irqfd, consumer);
+
+	kvm_arm_resume_guest(irqfd->kvm);
+}
+
+/* Initialize Hyp-mode and memory mappings on all CPUs */
+static __init int kvm_arm_init(void)
+{
+	int err;
+	bool in_hyp_mode;
+
+	if (!is_hyp_mode_available()) {
+		kvm_info("HYP mode not available\n");
+		return -ENODEV;
+	}
+
+	if (kvm_get_mode() == KVM_MODE_NONE) {
+		kvm_info("KVM disabled from command line\n");
+		return -ENODEV;
+	}
+
+	err = kvm_sys_reg_table_init();
+	if (err) {
+		kvm_info("Error initializing system register tables");
+		return err;
+	}
+
+	in_hyp_mode = is_kernel_in_hyp_mode();
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE) ||
+	    cpus_have_final_cap(ARM64_WORKAROUND_1508412))
+		kvm_info("Guests without required CPU erratum workarounds can deadlock system!\n" \
+			 "Only trusted guests should be used on this system.\n");
+
+	err = kvm_set_ipa_limit();
+	if (err)
+		return err;
+
+	err = kvm_arm_init_sve();
+	if (err)
+		return err;
+
+	err = kvm_arm_vmid_alloc_init();
+	if (err) {
+		kvm_err("Failed to initialize VMID allocator.\n");
+		return err;
+	}
+
+	if (!in_hyp_mode) {
+		err = init_hyp_mode();
+		if (err)
+			goto out_err;
+	}
+
+	err = kvm_init_vector_slots();
+	if (err) {
+		kvm_err("Cannot initialise vector slots\n");
+		goto out_hyp;
+	}
+
+	err = init_subsystems();
+	if (err)
+		goto out_hyp;
+
+	if (is_protected_kvm_enabled()) {
+		kvm_info("Protected nVHE mode initialized successfully\n");
+	} else if (in_hyp_mode) {
+		kvm_info("VHE mode initialized successfully\n");
+	} else {
+		kvm_info("Hyp mode initialized successfully\n");
+	}
+
+	/*
+	 * FIXME: Do something reasonable if kvm_init() fails after pKVM
+	 * hypervisor protection is finalized.
+	 */
+	err = kvm_init(sizeof(struct kvm_vcpu), 0, THIS_MODULE);
+	if (err)
+		goto out_subs;
+
+	kvm_arm_initialised = true;
+
+	return 0;
+
+out_subs:
+	teardown_subsystems();
+out_hyp:
+	if (!in_hyp_mode)
+		teardown_hyp_mode();
+out_err:
+	kvm_arm_vmid_alloc_free();
+	return err;
+}
+
+static int __init early_kvm_mode_cfg(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp(arg, "none") == 0) {
+		kvm_mode = KVM_MODE_NONE;
+		return 0;
+	}
+
+	if (!is_hyp_mode_available()) {
+		pr_warn_once("KVM is not available. Ignoring kvm-arm.mode\n");
+		return 0;
+	}
+
+	if (strcmp(arg, "protected") == 0) {
+		if (!is_kernel_in_hyp_mode())
+			kvm_mode = KVM_MODE_PROTECTED;
+		else
+			pr_warn_once("Protected KVM not available with VHE\n");
+
+		return 0;
+	}
+
+	if (strcmp(arg, "nvhe") == 0 && !WARN_ON(is_kernel_in_hyp_mode())) {
+		kvm_mode = KVM_MODE_DEFAULT;
+		return 0;
+	}
+
+	if (strcmp(arg, "nested") == 0 && !WARN_ON(!is_kernel_in_hyp_mode())) {
+		kvm_mode = KVM_MODE_NV;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+early_param("kvm-arm.mode", early_kvm_mode_cfg);
+
+enum kvm_mode kvm_get_mode(void)
+{
+	return kvm_mode;
+}
+
+module_init(kvm_arm_init);
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
new file mode 100644
index 000000000..8725291cb
--- /dev/null
+++ b/arch/arm64/kvm/debug.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Debug and Guest Debug support
+ *
+ * Copyright (C) 2015 - Linaro Ltd
+ * Author: Alex Bennée <alex.bennee@linaro.org>
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/hw_breakpoint.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_emulate.h>
+
+#include "trace.h"
+
+/* These are the bits of MDSCR_EL1 we may manipulate */
+#define MDSCR_EL1_DEBUG_MASK	(DBG_MDSCR_SS | \
+				DBG_MDSCR_KDE | \
+				DBG_MDSCR_MDE)
+
+static DEFINE_PER_CPU(u64, mdcr_el2);
+
+/**
+ * save/restore_guest_debug_regs
+ *
+ * For some debug operations we need to tweak some guest registers. As
+ * a result we need to save the state of those registers before we
+ * make those modifications.
+ *
+ * Guest access to MDSCR_EL1 is trapped by the hypervisor and handled
+ * after we have restored the preserved value to the main context.
+ *
+ * When single-step is enabled by userspace, we tweak PSTATE.SS on every
+ * guest entry. Preserve PSTATE.SS so we can restore the original value
+ * for the vcpu after the single-step is disabled.
+ */
+static void save_guest_debug_regs(struct kvm_vcpu *vcpu)
+{
+	u64 val = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
+
+	vcpu->arch.guest_debug_preserved.mdscr_el1 = val;
+
+	trace_kvm_arm_set_dreg32("Saved MDSCR_EL1",
+				vcpu->arch.guest_debug_preserved.mdscr_el1);
+
+	vcpu->arch.guest_debug_preserved.pstate_ss =
+					(*vcpu_cpsr(vcpu) & DBG_SPSR_SS);
+}
+
+static void restore_guest_debug_regs(struct kvm_vcpu *vcpu)
+{
+	u64 val = vcpu->arch.guest_debug_preserved.mdscr_el1;
+
+	vcpu_write_sys_reg(vcpu, val, MDSCR_EL1);
+
+	trace_kvm_arm_set_dreg32("Restored MDSCR_EL1",
+				vcpu_read_sys_reg(vcpu, MDSCR_EL1));
+
+	if (vcpu->arch.guest_debug_preserved.pstate_ss)
+		*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
+	else
+		*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+}
+
+/**
+ * kvm_arm_init_debug - grab what we need for debug
+ *
+ * Currently the sole task of this function is to retrieve the initial
+ * value of mdcr_el2 so we can preserve MDCR_EL2.HPMN which has
+ * presumably been set-up by some knowledgeable bootcode.
+ *
+ * It is called once per-cpu during CPU hyp initialisation.
+ */
+
+void kvm_arm_init_debug(void)
+{
+	__this_cpu_write(mdcr_el2, kvm_call_hyp_ret(__kvm_get_mdcr_el2));
+}
+
+/**
+ * kvm_arm_setup_mdcr_el2 - configure vcpu mdcr_el2 value
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * This ensures we will trap access to:
+ *  - Performance monitors (MDCR_EL2_TPM/MDCR_EL2_TPMCR)
+ *  - Debug ROM Address (MDCR_EL2_TDRA)
+ *  - OS related registers (MDCR_EL2_TDOSA)
+ *  - Statistical profiler (MDCR_EL2_TPMS/MDCR_EL2_E2PB)
+ *  - Self-hosted Trace Filter controls (MDCR_EL2_TTRF)
+ *  - Self-hosted Trace (MDCR_EL2_TTRF/MDCR_EL2_E2TB)
+ */
+static void kvm_arm_setup_mdcr_el2(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * This also clears MDCR_EL2_E2PB_MASK and MDCR_EL2_E2TB_MASK
+	 * to disable guest access to the profiling and trace buffers
+	 */
+	vcpu->arch.mdcr_el2 = __this_cpu_read(mdcr_el2) & MDCR_EL2_HPMN_MASK;
+	vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM |
+				MDCR_EL2_TPMS |
+				MDCR_EL2_TTRF |
+				MDCR_EL2_TPMCR |
+				MDCR_EL2_TDRA |
+				MDCR_EL2_TDOSA);
+
+	/* Is the VM being debugged by userspace? */
+	if (vcpu->guest_debug)
+		/* Route all software debug exceptions to EL2 */
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
+
+	/*
+	 * Trap debug register access when one of the following is true:
+	 *  - Userspace is using the hardware to debug the guest
+	 *  (KVM_GUESTDBG_USE_HW is set).
+	 *  - The guest is not using debug (DEBUG_DIRTY clear).
+	 *  - The guest has enabled the OS Lock (debug exceptions are blocked).
+	 */
+	if ((vcpu->guest_debug & KVM_GUESTDBG_USE_HW) ||
+	    !vcpu_get_flag(vcpu, DEBUG_DIRTY) ||
+	    kvm_vcpu_os_lock_enabled(vcpu))
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
+
+	trace_kvm_arm_set_dreg32("MDCR_EL2", vcpu->arch.mdcr_el2);
+}
+
+/**
+ * kvm_arm_vcpu_init_debug - setup vcpu debug traps
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * Set vcpu initial mdcr_el2 value.
+ */
+void kvm_arm_vcpu_init_debug(struct kvm_vcpu *vcpu)
+{
+	preempt_disable();
+	kvm_arm_setup_mdcr_el2(vcpu);
+	preempt_enable();
+}
+
+/**
+ * kvm_arm_reset_debug_ptr - reset the debug ptr to point to the vcpu state
+ */
+
+void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.debug_ptr = &vcpu->arch.vcpu_debug_state;
+}
+
+/**
+ * kvm_arm_setup_debug - set up debug related stuff
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * This is called before each entry into the hypervisor to setup any
+ * debug related registers.
+ *
+ * Additionally, KVM only traps guest accesses to the debug registers if
+ * the guest is not actively using them (see the DEBUG_DIRTY
+ * flag on vcpu->arch.iflags).  Since the guest must not interfere
+ * with the hardware state when debugging the guest, we must ensure that
+ * trapping is enabled whenever we are debugging the guest using the
+ * debug registers.
+ */
+
+void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
+{
+	unsigned long mdscr, orig_mdcr_el2 = vcpu->arch.mdcr_el2;
+
+	trace_kvm_arm_setup_debug(vcpu, vcpu->guest_debug);
+
+	kvm_arm_setup_mdcr_el2(vcpu);
+
+	/* Check if we need to use the debug registers. */
+	if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) {
+		/* Save guest debug state */
+		save_guest_debug_regs(vcpu);
+
+		/*
+		 * Single Step (ARM ARM D2.12.3 The software step state
+		 * machine)
+		 *
+		 * If we are doing Single Step we need to manipulate
+		 * the guest's MDSCR_EL1.SS and PSTATE.SS. Once the
+		 * step has occurred the hypervisor will trap the
+		 * debug exception and we return to userspace.
+		 *
+		 * If the guest attempts to single step its userspace
+		 * we would have to deal with a trapped exception
+		 * while in the guest kernel. Because this would be
+		 * hard to unwind we suppress the guest's ability to
+		 * do so by masking MDSCR_EL.SS.
+		 *
+		 * This confuses guest debuggers which use
+		 * single-step behind the scenes but everything
+		 * returns to normal once the host is no longer
+		 * debugging the system.
+		 */
+		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+			/*
+			 * If the software step state at the last guest exit
+			 * was Active-pending, we don't set DBG_SPSR_SS so
+			 * that the state is maintained (to not run another
+			 * single-step until the pending Software Step
+			 * exception is taken).
+			 */
+			if (!vcpu_get_flag(vcpu, DBG_SS_ACTIVE_PENDING))
+				*vcpu_cpsr(vcpu) |= DBG_SPSR_SS;
+			else
+				*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+
+			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
+			mdscr |= DBG_MDSCR_SS;
+			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
+		} else {
+			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
+			mdscr &= ~DBG_MDSCR_SS;
+			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
+		}
+
+		trace_kvm_arm_set_dreg32("SPSR_EL2", *vcpu_cpsr(vcpu));
+
+		/*
+		 * HW Breakpoints and watchpoints
+		 *
+		 * We simply switch the debug_ptr to point to our new
+		 * external_debug_state which has been populated by the
+		 * debug ioctl. The existing DEBUG_DIRTY mechanism ensures
+		 * the registers are updated on the world switch.
+		 */
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
+			/* Enable breakpoints/watchpoints */
+			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
+			mdscr |= DBG_MDSCR_MDE;
+			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
+
+			vcpu->arch.debug_ptr = &vcpu->arch.external_debug_state;
+			vcpu_set_flag(vcpu, DEBUG_DIRTY);
+
+			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
+						&vcpu->arch.debug_ptr->dbg_bcr[0],
+						&vcpu->arch.debug_ptr->dbg_bvr[0]);
+
+			trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
+						&vcpu->arch.debug_ptr->dbg_wcr[0],
+						&vcpu->arch.debug_ptr->dbg_wvr[0]);
+
+		/*
+		 * The OS Lock blocks debug exceptions in all ELs when it is
+		 * enabled. If the guest has enabled the OS Lock, constrain its
+		 * effects to the guest. Emulate the behavior by clearing
+		 * MDSCR_EL1.MDE. In so doing, we ensure that host debug
+		 * exceptions are unaffected by guest configuration of the OS
+		 * Lock.
+		 */
+		} else if (kvm_vcpu_os_lock_enabled(vcpu)) {
+			mdscr = vcpu_read_sys_reg(vcpu, MDSCR_EL1);
+			mdscr &= ~DBG_MDSCR_MDE;
+			vcpu_write_sys_reg(vcpu, mdscr, MDSCR_EL1);
+		}
+	}
+
+	BUG_ON(!vcpu->guest_debug &&
+		vcpu->arch.debug_ptr != &vcpu->arch.vcpu_debug_state);
+
+	/* If KDE or MDE are set, perform a full save/restore cycle. */
+	if (vcpu_read_sys_reg(vcpu, MDSCR_EL1) & (DBG_MDSCR_KDE | DBG_MDSCR_MDE))
+		vcpu_set_flag(vcpu, DEBUG_DIRTY);
+
+	/* Write mdcr_el2 changes since vcpu_load on VHE systems */
+	if (has_vhe() && orig_mdcr_el2 != vcpu->arch.mdcr_el2)
+		write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
+	trace_kvm_arm_set_dreg32("MDSCR_EL1", vcpu_read_sys_reg(vcpu, MDSCR_EL1));
+}
+
+void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
+{
+	trace_kvm_arm_clear_debug(vcpu->guest_debug);
+
+	/*
+	 * Restore the guest's debug registers if we were using them.
+	 */
+	if (vcpu->guest_debug || kvm_vcpu_os_lock_enabled(vcpu)) {
+		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+			if (!(*vcpu_cpsr(vcpu) & DBG_SPSR_SS))
+				/*
+				 * Mark the vcpu as ACTIVE_PENDING
+				 * until Software Step exception is taken.
+				 */
+				vcpu_set_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		}
+
+		restore_guest_debug_regs(vcpu);
+
+		/*
+		 * If we were using HW debug we need to restore the
+		 * debug_ptr to the guest debug state.
+		 */
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
+			kvm_arm_reset_debug_ptr(vcpu);
+
+			trace_kvm_arm_set_regset("BKPTS", get_num_brps(),
+						&vcpu->arch.debug_ptr->dbg_bcr[0],
+						&vcpu->arch.debug_ptr->dbg_bvr[0]);
+
+			trace_kvm_arm_set_regset("WAPTS", get_num_wrps(),
+						&vcpu->arch.debug_ptr->dbg_wcr[0],
+						&vcpu->arch.debug_ptr->dbg_wvr[0]);
+		}
+	}
+}
+
+void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
+{
+	u64 dfr0;
+
+	/* For VHE, there is nothing to do */
+	if (has_vhe())
+		return;
+
+	dfr0 = read_sysreg(id_aa64dfr0_el1);
+	/*
+	 * If SPE is present on this CPU and is available at current EL,
+	 * we may need to check if the host state needs to be saved.
+	 */
+	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) &&
+	    !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT)))
+		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE);
+
+	/* Check if we have TRBE implemented and available at the host */
+	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) &&
+	    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P))
+		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
+}
+
+void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
+{
+	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE);
+	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
+}
diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c
new file mode 100644
index 000000000..ee902ff2a
--- /dev/null
+++ b/arch/arm64/kvm/emulate-nested.c
@@ -0,0 +1,2057 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 - Linaro and Columbia University
+ * Author: Jintack Lim <jintack.lim@linaro.org>
+ */
+
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_nested.h>
+
+#include "hyp/include/hyp/adjust_pc.h"
+
+#include "trace.h"
+
+enum trap_behaviour {
+	BEHAVE_HANDLE_LOCALLY	= 0,
+	BEHAVE_FORWARD_READ	= BIT(0),
+	BEHAVE_FORWARD_WRITE	= BIT(1),
+	BEHAVE_FORWARD_ANY	= BEHAVE_FORWARD_READ | BEHAVE_FORWARD_WRITE,
+};
+
+struct trap_bits {
+	const enum vcpu_sysreg		index;
+	const enum trap_behaviour	behaviour;
+	const u64			value;
+	const u64			mask;
+};
+
+/* Coarse Grained Trap definitions */
+enum cgt_group_id {
+	/* Indicates no coarse trap control */
+	__RESERVED__,
+
+	/*
+	 * The first batch of IDs denote coarse trapping that are used
+	 * on their own instead of being part of a combination of
+	 * trap controls.
+	 */
+	CGT_HCR_TID1,
+	CGT_HCR_TID2,
+	CGT_HCR_TID3,
+	CGT_HCR_IMO,
+	CGT_HCR_FMO,
+	CGT_HCR_TIDCP,
+	CGT_HCR_TACR,
+	CGT_HCR_TSW,
+	CGT_HCR_TPC,
+	CGT_HCR_TPU,
+	CGT_HCR_TTLB,
+	CGT_HCR_TVM,
+	CGT_HCR_TDZ,
+	CGT_HCR_TRVM,
+	CGT_HCR_TLOR,
+	CGT_HCR_TERR,
+	CGT_HCR_APK,
+	CGT_HCR_NV,
+	CGT_HCR_NV_nNV2,
+	CGT_HCR_NV1_nNV2,
+	CGT_HCR_AT,
+	CGT_HCR_nFIEN,
+	CGT_HCR_TID4,
+	CGT_HCR_TICAB,
+	CGT_HCR_TOCU,
+	CGT_HCR_ENSCXT,
+	CGT_HCR_TTLBIS,
+	CGT_HCR_TTLBOS,
+
+	CGT_MDCR_TPMCR,
+	CGT_MDCR_TPM,
+	CGT_MDCR_TDE,
+	CGT_MDCR_TDA,
+	CGT_MDCR_TDOSA,
+	CGT_MDCR_TDRA,
+	CGT_MDCR_E2PB,
+	CGT_MDCR_TPMS,
+	CGT_MDCR_TTRF,
+	CGT_MDCR_E2TB,
+	CGT_MDCR_TDCC,
+
+	/*
+	 * Anything after this point is a combination of coarse trap
+	 * controls, which must all be evaluated to decide what to do.
+	 */
+	__MULTIPLE_CONTROL_BITS__,
+	CGT_HCR_IMO_FMO = __MULTIPLE_CONTROL_BITS__,
+	CGT_HCR_TID2_TID4,
+	CGT_HCR_TTLB_TTLBIS,
+	CGT_HCR_TTLB_TTLBOS,
+	CGT_HCR_TVM_TRVM,
+	CGT_HCR_TPU_TICAB,
+	CGT_HCR_TPU_TOCU,
+	CGT_HCR_NV1_nNV2_ENSCXT,
+	CGT_MDCR_TPM_TPMCR,
+	CGT_MDCR_TDE_TDA,
+	CGT_MDCR_TDE_TDOSA,
+	CGT_MDCR_TDE_TDRA,
+	CGT_MDCR_TDCC_TDE_TDA,
+
+	/*
+	 * Anything after this point requires a callback evaluating a
+	 * complex trap condition. Ugly stuff.
+	 */
+	__COMPLEX_CONDITIONS__,
+	CGT_CNTHCTL_EL1PCTEN = __COMPLEX_CONDITIONS__,
+	CGT_CNTHCTL_EL1PTEN,
+
+	/* Must be last */
+	__NR_CGT_GROUP_IDS__
+};
+
+static const struct trap_bits coarse_trap_bits[] = {
+	[CGT_HCR_TID1] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_TID1,
+		.mask		= HCR_TID1,
+		.behaviour	= BEHAVE_FORWARD_READ,
+	},
+	[CGT_HCR_TID2] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_TID2,
+		.mask		= HCR_TID2,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TID3] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_TID3,
+		.mask		= HCR_TID3,
+		.behaviour	= BEHAVE_FORWARD_READ,
+	},
+	[CGT_HCR_IMO] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_IMO,
+		.mask		= HCR_IMO,
+		.behaviour	= BEHAVE_FORWARD_WRITE,
+	},
+	[CGT_HCR_FMO] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_FMO,
+		.mask		= HCR_FMO,
+		.behaviour	= BEHAVE_FORWARD_WRITE,
+	},
+	[CGT_HCR_TIDCP] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TIDCP,
+		.mask		= HCR_TIDCP,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TACR] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TACR,
+		.mask		= HCR_TACR,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TSW] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TSW,
+		.mask		= HCR_TSW,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TPC] = { /* Also called TCPC when FEAT_DPB is implemented */
+		.index		= HCR_EL2,
+		.value		= HCR_TPC,
+		.mask		= HCR_TPC,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TPU] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TPU,
+		.mask		= HCR_TPU,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TTLB] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TTLB,
+		.mask		= HCR_TTLB,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TVM] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TVM,
+		.mask		= HCR_TVM,
+		.behaviour	= BEHAVE_FORWARD_WRITE,
+	},
+	[CGT_HCR_TDZ] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TDZ,
+		.mask		= HCR_TDZ,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TRVM] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TRVM,
+		.mask		= HCR_TRVM,
+		.behaviour	= BEHAVE_FORWARD_READ,
+	},
+	[CGT_HCR_TLOR] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TLOR,
+		.mask		= HCR_TLOR,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TERR] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TERR,
+		.mask		= HCR_TERR,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_APK] = {
+		.index		= HCR_EL2,
+		.value		= 0,
+		.mask		= HCR_APK,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_NV] = {
+		.index		= HCR_EL2,
+		.value		= HCR_NV,
+		.mask		= HCR_NV,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_NV_nNV2] = {
+		.index		= HCR_EL2,
+		.value		= HCR_NV,
+		.mask		= HCR_NV | HCR_NV2,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_NV1_nNV2] = {
+		.index		= HCR_EL2,
+		.value		= HCR_NV | HCR_NV1,
+		.mask		= HCR_NV | HCR_NV1 | HCR_NV2,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_AT] = {
+		.index		= HCR_EL2,
+		.value		= HCR_AT,
+		.mask		= HCR_AT,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_nFIEN] = {
+		.index		= HCR_EL2,
+		.value		= 0,
+		.mask		= HCR_FIEN,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TID4] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_TID4,
+		.mask		= HCR_TID4,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TICAB] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_TICAB,
+		.mask		= HCR_TICAB,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TOCU] = {
+		.index		= HCR_EL2,
+		.value 		= HCR_TOCU,
+		.mask		= HCR_TOCU,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_ENSCXT] = {
+		.index		= HCR_EL2,
+		.value 		= 0,
+		.mask		= HCR_ENSCXT,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TTLBIS] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TTLBIS,
+		.mask		= HCR_TTLBIS,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_HCR_TTLBOS] = {
+		.index		= HCR_EL2,
+		.value		= HCR_TTLBOS,
+		.mask		= HCR_TTLBOS,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TPMCR] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TPMCR,
+		.mask		= MDCR_EL2_TPMCR,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TPM] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TPM,
+		.mask		= MDCR_EL2_TPM,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TDE] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TDE,
+		.mask		= MDCR_EL2_TDE,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TDA] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TDA,
+		.mask		= MDCR_EL2_TDA,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TDOSA] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TDOSA,
+		.mask		= MDCR_EL2_TDOSA,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TDRA] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TDRA,
+		.mask		= MDCR_EL2_TDRA,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_E2PB] = {
+		.index		= MDCR_EL2,
+		.value		= 0,
+		.mask		= BIT(MDCR_EL2_E2PB_SHIFT),
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TPMS] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TPMS,
+		.mask		= MDCR_EL2_TPMS,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TTRF] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TTRF,
+		.mask		= MDCR_EL2_TTRF,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_E2TB] = {
+		.index		= MDCR_EL2,
+		.value		= 0,
+		.mask		= BIT(MDCR_EL2_E2TB_SHIFT),
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+	[CGT_MDCR_TDCC] = {
+		.index		= MDCR_EL2,
+		.value		= MDCR_EL2_TDCC,
+		.mask		= MDCR_EL2_TDCC,
+		.behaviour	= BEHAVE_FORWARD_ANY,
+	},
+};
+
+#define MCB(id, ...)						\
+	[id - __MULTIPLE_CONTROL_BITS__]	=		\
+		(const enum cgt_group_id[]){			\
+		__VA_ARGS__, __RESERVED__			\
+		}
+
+static const enum cgt_group_id *coarse_control_combo[] = {
+	MCB(CGT_HCR_IMO_FMO,		CGT_HCR_IMO, CGT_HCR_FMO),
+	MCB(CGT_HCR_TID2_TID4,		CGT_HCR_TID2, CGT_HCR_TID4),
+	MCB(CGT_HCR_TTLB_TTLBIS,	CGT_HCR_TTLB, CGT_HCR_TTLBIS),
+	MCB(CGT_HCR_TTLB_TTLBOS,	CGT_HCR_TTLB, CGT_HCR_TTLBOS),
+	MCB(CGT_HCR_TVM_TRVM,		CGT_HCR_TVM, CGT_HCR_TRVM),
+	MCB(CGT_HCR_TPU_TICAB,		CGT_HCR_TPU, CGT_HCR_TICAB),
+	MCB(CGT_HCR_TPU_TOCU,		CGT_HCR_TPU, CGT_HCR_TOCU),
+	MCB(CGT_HCR_NV1_nNV2_ENSCXT,	CGT_HCR_NV1_nNV2, CGT_HCR_ENSCXT),
+	MCB(CGT_MDCR_TPM_TPMCR,		CGT_MDCR_TPM, CGT_MDCR_TPMCR),
+	MCB(CGT_MDCR_TDE_TDA,		CGT_MDCR_TDE, CGT_MDCR_TDA),
+	MCB(CGT_MDCR_TDE_TDOSA,		CGT_MDCR_TDE, CGT_MDCR_TDOSA),
+	MCB(CGT_MDCR_TDE_TDRA,		CGT_MDCR_TDE, CGT_MDCR_TDRA),
+	MCB(CGT_MDCR_TDCC_TDE_TDA,	CGT_MDCR_TDCC, CGT_MDCR_TDE, CGT_MDCR_TDA),
+};
+
+typedef enum trap_behaviour (*complex_condition_check)(struct kvm_vcpu *);
+
+/*
+ * Warning, maximum confusion ahead.
+ *
+ * When E2H=0, CNTHCTL_EL2[1:0] are defined as EL1PCEN:EL1PCTEN
+ * When E2H=1, CNTHCTL_EL2[11:10] are defined as EL1PTEN:EL1PCTEN
+ *
+ * Note the single letter difference? Yet, the bits have the same
+ * function despite a different layout and a different name.
+ *
+ * We don't try to reconcile this mess. We just use the E2H=0 bits
+ * to generate something that is in the E2H=1 format, and live with
+ * it. You're welcome.
+ */
+static u64 get_sanitized_cnthctl(struct kvm_vcpu *vcpu)
+{
+	u64 val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2);
+
+	if (!vcpu_el2_e2h_is_set(vcpu))
+		val = (val & (CNTHCTL_EL1PCEN | CNTHCTL_EL1PCTEN)) << 10;
+
+	return val & ((CNTHCTL_EL1PCEN | CNTHCTL_EL1PCTEN) << 10);
+}
+
+static enum trap_behaviour check_cnthctl_el1pcten(struct kvm_vcpu *vcpu)
+{
+	if (get_sanitized_cnthctl(vcpu) & (CNTHCTL_EL1PCTEN << 10))
+		return BEHAVE_HANDLE_LOCALLY;
+
+	return BEHAVE_FORWARD_ANY;
+}
+
+static enum trap_behaviour check_cnthctl_el1pten(struct kvm_vcpu *vcpu)
+{
+	if (get_sanitized_cnthctl(vcpu) & (CNTHCTL_EL1PCEN << 10))
+		return BEHAVE_HANDLE_LOCALLY;
+
+	return BEHAVE_FORWARD_ANY;
+}
+
+#define CCC(id, fn)				\
+	[id - __COMPLEX_CONDITIONS__] = fn
+
+static const complex_condition_check ccc[] = {
+	CCC(CGT_CNTHCTL_EL1PCTEN, check_cnthctl_el1pcten),
+	CCC(CGT_CNTHCTL_EL1PTEN, check_cnthctl_el1pten),
+};
+
+/*
+ * Bit assignment for the trap controls. We use a 64bit word with the
+ * following layout for each trapped sysreg:
+ *
+ * [9:0]	enum cgt_group_id (10 bits)
+ * [13:10]	enum fgt_group_id (4 bits)
+ * [19:14]	bit number in the FGT register (6 bits)
+ * [20]		trap polarity (1 bit)
+ * [25:21]	FG filter (5 bits)
+ * [62:26]	Unused (37 bits)
+ * [63]		RES0 - Must be zero, as lost on insertion in the xarray
+ */
+#define TC_CGT_BITS	10
+#define TC_FGT_BITS	4
+#define TC_FGF_BITS	5
+
+union trap_config {
+	u64	val;
+	struct {
+		unsigned long	cgt:TC_CGT_BITS; /* Coarse Grained Trap id */
+		unsigned long	fgt:TC_FGT_BITS; /* Fine Grained Trap id */
+		unsigned long	bit:6;		 /* Bit number */
+		unsigned long	pol:1;		 /* Polarity */
+		unsigned long	fgf:TC_FGF_BITS; /* Fine Grained Filter */
+		unsigned long	unused:37;	 /* Unused, should be zero */
+		unsigned long	mbz:1;		 /* Must Be Zero */
+	};
+};
+
+struct encoding_to_trap_config {
+	const u32			encoding;
+	const u32			end;
+	const union trap_config		tc;
+	const unsigned int		line;
+};
+
+#define SR_RANGE_TRAP(sr_start, sr_end, trap_id)			\
+	{								\
+		.encoding	= sr_start,				\
+		.end		= sr_end,				\
+		.tc		= {					\
+			.cgt		= trap_id,			\
+		},							\
+		.line = __LINE__,					\
+	}
+
+#define SR_TRAP(sr, trap_id)		SR_RANGE_TRAP(sr, sr, trap_id)
+
+/*
+ * Map encoding to trap bits for exception reported with EC=0x18.
+ * These must only be evaluated when running a nested hypervisor, but
+ * that the current context is not a hypervisor context. When the
+ * trapped access matches one of the trap controls, the exception is
+ * re-injected in the nested hypervisor.
+ */
+static const struct encoding_to_trap_config encoding_to_cgt[] __initconst = {
+	SR_TRAP(SYS_REVIDR_EL1,		CGT_HCR_TID1),
+	SR_TRAP(SYS_AIDR_EL1,		CGT_HCR_TID1),
+	SR_TRAP(SYS_SMIDR_EL1,		CGT_HCR_TID1),
+	SR_TRAP(SYS_CTR_EL0,		CGT_HCR_TID2),
+	SR_TRAP(SYS_CCSIDR_EL1,		CGT_HCR_TID2_TID4),
+	SR_TRAP(SYS_CCSIDR2_EL1,	CGT_HCR_TID2_TID4),
+	SR_TRAP(SYS_CLIDR_EL1,		CGT_HCR_TID2_TID4),
+	SR_TRAP(SYS_CSSELR_EL1,		CGT_HCR_TID2_TID4),
+	SR_RANGE_TRAP(SYS_ID_PFR0_EL1,
+		      sys_reg(3, 0, 0, 7, 7), CGT_HCR_TID3),
+	SR_TRAP(SYS_ICC_SGI0R_EL1,	CGT_HCR_IMO_FMO),
+	SR_TRAP(SYS_ICC_ASGI1R_EL1,	CGT_HCR_IMO_FMO),
+	SR_TRAP(SYS_ICC_SGI1R_EL1,	CGT_HCR_IMO_FMO),
+	SR_RANGE_TRAP(sys_reg(3, 0, 11, 0, 0),
+		      sys_reg(3, 0, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 1, 11, 0, 0),
+		      sys_reg(3, 1, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 2, 11, 0, 0),
+		      sys_reg(3, 2, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 3, 11, 0, 0),
+		      sys_reg(3, 3, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 4, 11, 0, 0),
+		      sys_reg(3, 4, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 5, 11, 0, 0),
+		      sys_reg(3, 5, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 6, 11, 0, 0),
+		      sys_reg(3, 6, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 7, 11, 0, 0),
+		      sys_reg(3, 7, 11, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 0, 15, 0, 0),
+		      sys_reg(3, 0, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 1, 15, 0, 0),
+		      sys_reg(3, 1, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 2, 15, 0, 0),
+		      sys_reg(3, 2, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 3, 15, 0, 0),
+		      sys_reg(3, 3, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 4, 15, 0, 0),
+		      sys_reg(3, 4, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 5, 15, 0, 0),
+		      sys_reg(3, 5, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 6, 15, 0, 0),
+		      sys_reg(3, 6, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_RANGE_TRAP(sys_reg(3, 7, 15, 0, 0),
+		      sys_reg(3, 7, 15, 15, 7), CGT_HCR_TIDCP),
+	SR_TRAP(SYS_ACTLR_EL1,		CGT_HCR_TACR),
+	SR_TRAP(SYS_DC_ISW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CISW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_IGSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_IGDSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CGSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CGDSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CIGSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CIGDSW,		CGT_HCR_TSW),
+	SR_TRAP(SYS_DC_CIVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CVAP,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CVADP,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_IVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CIGVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CIGDVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_IGVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_IGDVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CGVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CGDVAC,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CGVAP,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CGDVAP,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CGVADP,		CGT_HCR_TPC),
+	SR_TRAP(SYS_DC_CGDVADP,		CGT_HCR_TPC),
+	SR_TRAP(SYS_IC_IVAU,		CGT_HCR_TPU_TOCU),
+	SR_TRAP(SYS_IC_IALLU,		CGT_HCR_TPU_TOCU),
+	SR_TRAP(SYS_IC_IALLUIS,		CGT_HCR_TPU_TICAB),
+	SR_TRAP(SYS_DC_CVAU,		CGT_HCR_TPU_TOCU),
+	SR_TRAP(OP_TLBI_RVAE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVAAE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVALE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVAALE1,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VMALLE1,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VAE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_ASIDE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VAAE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VALE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VAALE1,		CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVAE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVAAE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVALE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVAALE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VMALLE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VAE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_ASIDE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VAAE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VALE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_VAALE1NXS,	CGT_HCR_TTLB),
+	SR_TRAP(OP_TLBI_RVAE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVAAE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVALE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVAALE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VMALLE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VAE1IS,		CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_ASIDE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VAAE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VALE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VAALE1IS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVAE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVAAE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVALE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_RVAALE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VMALLE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VAE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_ASIDE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VAAE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VALE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VAALE1ISNXS,	CGT_HCR_TTLB_TTLBIS),
+	SR_TRAP(OP_TLBI_VMALLE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VAE1OS,		CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_ASIDE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VAAE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VALE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VAALE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVAE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVAAE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVALE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVAALE1OS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VMALLE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VAE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_ASIDE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VAAE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VALE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_VAALE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVAE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVAAE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVALE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(OP_TLBI_RVAALE1OSNXS,	CGT_HCR_TTLB_TTLBOS),
+	SR_TRAP(SYS_SCTLR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_TTBR0_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_TTBR1_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_TCR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_ESR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_FAR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_AFSR0_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_AFSR1_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_MAIR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_AMAIR_EL1,		CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_CONTEXTIDR_EL1,	CGT_HCR_TVM_TRVM),
+	SR_TRAP(SYS_DC_ZVA,		CGT_HCR_TDZ),
+	SR_TRAP(SYS_DC_GVA,		CGT_HCR_TDZ),
+	SR_TRAP(SYS_DC_GZVA,		CGT_HCR_TDZ),
+	SR_TRAP(SYS_LORSA_EL1,		CGT_HCR_TLOR),
+	SR_TRAP(SYS_LOREA_EL1, 		CGT_HCR_TLOR),
+	SR_TRAP(SYS_LORN_EL1, 		CGT_HCR_TLOR),
+	SR_TRAP(SYS_LORC_EL1, 		CGT_HCR_TLOR),
+	SR_TRAP(SYS_LORID_EL1,		CGT_HCR_TLOR),
+	SR_TRAP(SYS_ERRIDR_EL1,		CGT_HCR_TERR),
+	SR_TRAP(SYS_ERRSELR_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXADDR_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXCTLR_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXFR_EL1,		CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXMISC0_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXMISC1_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXMISC2_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXMISC3_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_ERXSTATUS_EL1,	CGT_HCR_TERR),
+	SR_TRAP(SYS_APIAKEYLO_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APIAKEYHI_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APIBKEYLO_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APIBKEYHI_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APDAKEYLO_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APDAKEYHI_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APDBKEYLO_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APDBKEYHI_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APGAKEYLO_EL1,	CGT_HCR_APK),
+	SR_TRAP(SYS_APGAKEYHI_EL1,	CGT_HCR_APK),
+	/* All _EL2 registers */
+	SR_RANGE_TRAP(sys_reg(3, 4, 0, 0, 0),
+		      sys_reg(3, 4, 3, 15, 7), CGT_HCR_NV),
+	/* Skip the SP_EL1 encoding... */
+	SR_TRAP(SYS_SPSR_EL2,		CGT_HCR_NV),
+	SR_TRAP(SYS_ELR_EL2,		CGT_HCR_NV),
+	SR_RANGE_TRAP(sys_reg(3, 4, 4, 1, 1),
+		      sys_reg(3, 4, 10, 15, 7), CGT_HCR_NV),
+	SR_RANGE_TRAP(sys_reg(3, 4, 12, 0, 0),
+		      sys_reg(3, 4, 14, 15, 7), CGT_HCR_NV),
+	/* All _EL02, _EL12 registers */
+	SR_RANGE_TRAP(sys_reg(3, 5, 0, 0, 0),
+		      sys_reg(3, 5, 10, 15, 7), CGT_HCR_NV),
+	SR_RANGE_TRAP(sys_reg(3, 5, 12, 0, 0),
+		      sys_reg(3, 5, 14, 15, 7), CGT_HCR_NV),
+	SR_TRAP(OP_AT_S1E2R,		CGT_HCR_NV),
+	SR_TRAP(OP_AT_S1E2W,		CGT_HCR_NV),
+	SR_TRAP(OP_AT_S12E1R,		CGT_HCR_NV),
+	SR_TRAP(OP_AT_S12E1W,		CGT_HCR_NV),
+	SR_TRAP(OP_AT_S12E0R,		CGT_HCR_NV),
+	SR_TRAP(OP_AT_S12E0W,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2E1,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2E1,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2LE1,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2LE1,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVAE2,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVALE2,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE2,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VAE2,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE1,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VALE2,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VMALLS12E1,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2E1NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2E1NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2LE1NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2LE1NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVAE2NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVALE2NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE2NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VAE2NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE1NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VALE2NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VMALLS12E1NXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2E1IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2E1IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2LE1IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2LE1IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVAE2IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVALE2IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE2IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VAE2IS,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE1IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VALE2IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VMALLS12E1IS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2E1ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2E1ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2LE1ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2LE1ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVAE2ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVALE2ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE2ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VAE2ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE1ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VALE2ISNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VMALLS12E1ISNXS,CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE2OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VAE2OS,		CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE1OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VALE2OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VMALLS12E1OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2E1OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2E1OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2LE1OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2LE1OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVAE2OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVALE2OS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE2OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VAE2OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_ALLE1OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VALE2OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_VMALLS12E1OSNXS,CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2E1OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2E1OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_IPAS2LE1OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RIPAS2LE1OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVAE2OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_TLBI_RVALE2OSNXS,	CGT_HCR_NV),
+	SR_TRAP(OP_CPP_RCTX, 		CGT_HCR_NV),
+	SR_TRAP(OP_DVP_RCTX, 		CGT_HCR_NV),
+	SR_TRAP(OP_CFP_RCTX, 		CGT_HCR_NV),
+	SR_TRAP(SYS_SP_EL1,		CGT_HCR_NV_nNV2),
+	SR_TRAP(SYS_VBAR_EL1,		CGT_HCR_NV1_nNV2),
+	SR_TRAP(SYS_ELR_EL1,		CGT_HCR_NV1_nNV2),
+	SR_TRAP(SYS_SPSR_EL1,		CGT_HCR_NV1_nNV2),
+	SR_TRAP(SYS_SCXTNUM_EL1,	CGT_HCR_NV1_nNV2_ENSCXT),
+	SR_TRAP(SYS_SCXTNUM_EL0,	CGT_HCR_ENSCXT),
+	SR_TRAP(OP_AT_S1E1R, 		CGT_HCR_AT),
+	SR_TRAP(OP_AT_S1E1W, 		CGT_HCR_AT),
+	SR_TRAP(OP_AT_S1E0R, 		CGT_HCR_AT),
+	SR_TRAP(OP_AT_S1E0W, 		CGT_HCR_AT),
+	SR_TRAP(OP_AT_S1E1RP, 		CGT_HCR_AT),
+	SR_TRAP(OP_AT_S1E1WP, 		CGT_HCR_AT),
+	SR_TRAP(SYS_ERXPFGF_EL1,	CGT_HCR_nFIEN),
+	SR_TRAP(SYS_ERXPFGCTL_EL1,	CGT_HCR_nFIEN),
+	SR_TRAP(SYS_ERXPFGCDN_EL1,	CGT_HCR_nFIEN),
+	SR_TRAP(SYS_PMCR_EL0,		CGT_MDCR_TPM_TPMCR),
+	SR_TRAP(SYS_PMCNTENSET_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMCNTENCLR_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMOVSSET_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMOVSCLR_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMCEID0_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMCEID1_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMXEVTYPER_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMSWINC_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMSELR_EL0,		CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMXEVCNTR_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMCCNTR_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMUSERENR_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMINTENSET_EL1,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMINTENCLR_EL1,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMMIR_EL1,		CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(0),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(1),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(2),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(3),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(4),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(5),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(6),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(7),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(8),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(9),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(10),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(11),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(12),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(13),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(14),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(15),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(16),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(17),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(18),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(19),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(20),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(21),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(22),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(23),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(24),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(25),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(26),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(27),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(28),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(29),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVCNTRn_EL0(30),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(0),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(1),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(2),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(3),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(4),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(5),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(6),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(7),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(8),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(9),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(10),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(11),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(12),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(13),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(14),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(15),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(16),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(17),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(18),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(19),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(20),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(21),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(22),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(23),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(24),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(25),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(26),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(27),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(28),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(29),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMEVTYPERn_EL0(30),	CGT_MDCR_TPM),
+	SR_TRAP(SYS_PMCCFILTR_EL0,	CGT_MDCR_TPM),
+	SR_TRAP(SYS_MDCCSR_EL0,		CGT_MDCR_TDCC_TDE_TDA),
+	SR_TRAP(SYS_MDCCINT_EL1,	CGT_MDCR_TDCC_TDE_TDA),
+	SR_TRAP(SYS_OSDTRRX_EL1,	CGT_MDCR_TDCC_TDE_TDA),
+	SR_TRAP(SYS_OSDTRTX_EL1,	CGT_MDCR_TDCC_TDE_TDA),
+	SR_TRAP(SYS_DBGDTR_EL0,		CGT_MDCR_TDCC_TDE_TDA),
+	/*
+	 * Also covers DBGDTRRX_EL0, which has the same encoding as
+	 * SYS_DBGDTRTX_EL0...
+	 */
+	SR_TRAP(SYS_DBGDTRTX_EL0,	CGT_MDCR_TDCC_TDE_TDA),
+	SR_TRAP(SYS_MDSCR_EL1,		CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_OSECCR_EL1,		CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(0),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(1),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(2),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(3),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(4),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(5),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(6),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(7),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(8),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(9),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(10),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(11),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(12),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(13),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(14),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBVRn_EL1(15),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(0),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(1),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(2),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(3),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(4),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(5),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(6),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(7),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(8),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(9),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(10),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(11),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(12),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(13),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(14),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGBCRn_EL1(15),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(0),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(1),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(2),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(3),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(4),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(5),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(6),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(7),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(8),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(9),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(10),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(11),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(12),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(13),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(14),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWVRn_EL1(15),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(0),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(1),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(2),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(3),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(4),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(5),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(6),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(7),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(8),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(9),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(10),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(11),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(12),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(13),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGWCRn_EL1(14),	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGCLAIMSET_EL1,	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGCLAIMCLR_EL1,	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_DBGAUTHSTATUS_EL1,	CGT_MDCR_TDE_TDA),
+	SR_TRAP(SYS_OSLAR_EL1,		CGT_MDCR_TDE_TDOSA),
+	SR_TRAP(SYS_OSLSR_EL1,		CGT_MDCR_TDE_TDOSA),
+	SR_TRAP(SYS_OSDLR_EL1,		CGT_MDCR_TDE_TDOSA),
+	SR_TRAP(SYS_DBGPRCR_EL1,	CGT_MDCR_TDE_TDOSA),
+	SR_TRAP(SYS_MDRAR_EL1,		CGT_MDCR_TDE_TDRA),
+	SR_TRAP(SYS_PMBLIMITR_EL1,	CGT_MDCR_E2PB),
+	SR_TRAP(SYS_PMBPTR_EL1,		CGT_MDCR_E2PB),
+	SR_TRAP(SYS_PMBSR_EL1,		CGT_MDCR_E2PB),
+	SR_TRAP(SYS_PMSCR_EL1,		CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSEVFR_EL1,	CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSFCR_EL1,		CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSICR_EL1,		CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSIDR_EL1,		CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSIRR_EL1,		CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSLATFR_EL1,	CGT_MDCR_TPMS),
+	SR_TRAP(SYS_PMSNEVFR_EL1,	CGT_MDCR_TPMS),
+	SR_TRAP(SYS_TRFCR_EL1,		CGT_MDCR_TTRF),
+	SR_TRAP(SYS_TRBBASER_EL1,	CGT_MDCR_E2TB),
+	SR_TRAP(SYS_TRBLIMITR_EL1,	CGT_MDCR_E2TB),
+	SR_TRAP(SYS_TRBMAR_EL1, 	CGT_MDCR_E2TB),
+	SR_TRAP(SYS_TRBPTR_EL1, 	CGT_MDCR_E2TB),
+	SR_TRAP(SYS_TRBSR_EL1, 		CGT_MDCR_E2TB),
+	SR_TRAP(SYS_TRBTRG_EL1,		CGT_MDCR_E2TB),
+	SR_TRAP(SYS_CNTP_TVAL_EL0,	CGT_CNTHCTL_EL1PTEN),
+	SR_TRAP(SYS_CNTP_CVAL_EL0,	CGT_CNTHCTL_EL1PTEN),
+	SR_TRAP(SYS_CNTP_CTL_EL0,	CGT_CNTHCTL_EL1PTEN),
+	SR_TRAP(SYS_CNTPCT_EL0,		CGT_CNTHCTL_EL1PCTEN),
+	SR_TRAP(SYS_CNTPCTSS_EL0,	CGT_CNTHCTL_EL1PCTEN),
+};
+
+static DEFINE_XARRAY(sr_forward_xa);
+
+enum fgt_group_id {
+	__NO_FGT_GROUP__,
+	HFGxTR_GROUP,
+	HDFGRTR_GROUP,
+	HDFGWTR_GROUP,
+	HFGITR_GROUP,
+
+	/* Must be last */
+	__NR_FGT_GROUP_IDS__
+};
+
+enum fg_filter_id {
+	__NO_FGF__,
+	HCRX_FGTnXS,
+
+	/* Must be last */
+	__NR_FG_FILTER_IDS__
+};
+
+#define SR_FGF(sr, g, b, p, f)					\
+	{							\
+		.encoding	= sr,				\
+		.end		= sr,				\
+		.tc		= {				\
+			.fgt = g ## _GROUP,			\
+			.bit = g ## _EL2_ ## b ## _SHIFT,	\
+			.pol = p,				\
+			.fgf = f,				\
+		},						\
+		.line = __LINE__,				\
+	}
+
+#define SR_FGT(sr, g, b, p)	SR_FGF(sr, g, b, p, __NO_FGF__)
+
+static const struct encoding_to_trap_config encoding_to_fgt[] __initconst = {
+	/* HFGRTR_EL2, HFGWTR_EL2 */
+	SR_FGT(SYS_PIR_EL1,		HFGxTR, nPIR_EL1, 0),
+	SR_FGT(SYS_PIRE0_EL1,		HFGxTR, nPIRE0_EL1, 0),
+	SR_FGT(SYS_TPIDR2_EL0,		HFGxTR, nTPIDR2_EL0, 0),
+	SR_FGT(SYS_SMPRI_EL1,		HFGxTR, nSMPRI_EL1, 0),
+	SR_FGT(SYS_ACCDATA_EL1,		HFGxTR, nACCDATA_EL1, 0),
+	SR_FGT(SYS_ERXADDR_EL1,		HFGxTR, ERXADDR_EL1, 1),
+	SR_FGT(SYS_ERXPFGCDN_EL1,	HFGxTR, ERXPFGCDN_EL1, 1),
+	SR_FGT(SYS_ERXPFGCTL_EL1,	HFGxTR, ERXPFGCTL_EL1, 1),
+	SR_FGT(SYS_ERXPFGF_EL1,		HFGxTR, ERXPFGF_EL1, 1),
+	SR_FGT(SYS_ERXMISC0_EL1,	HFGxTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC1_EL1,	HFGxTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC2_EL1,	HFGxTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXMISC3_EL1,	HFGxTR, ERXMISCn_EL1, 1),
+	SR_FGT(SYS_ERXSTATUS_EL1,	HFGxTR, ERXSTATUS_EL1, 1),
+	SR_FGT(SYS_ERXCTLR_EL1,		HFGxTR, ERXCTLR_EL1, 1),
+	SR_FGT(SYS_ERXFR_EL1,		HFGxTR, ERXFR_EL1, 1),
+	SR_FGT(SYS_ERRSELR_EL1,		HFGxTR, ERRSELR_EL1, 1),
+	SR_FGT(SYS_ERRIDR_EL1,		HFGxTR, ERRIDR_EL1, 1),
+	SR_FGT(SYS_ICC_IGRPEN0_EL1,	HFGxTR, ICC_IGRPENn_EL1, 1),
+	SR_FGT(SYS_ICC_IGRPEN1_EL1,	HFGxTR, ICC_IGRPENn_EL1, 1),
+	SR_FGT(SYS_VBAR_EL1,		HFGxTR, VBAR_EL1, 1),
+	SR_FGT(SYS_TTBR1_EL1,		HFGxTR, TTBR1_EL1, 1),
+	SR_FGT(SYS_TTBR0_EL1,		HFGxTR, TTBR0_EL1, 1),
+	SR_FGT(SYS_TPIDR_EL0,		HFGxTR, TPIDR_EL0, 1),
+	SR_FGT(SYS_TPIDRRO_EL0,		HFGxTR, TPIDRRO_EL0, 1),
+	SR_FGT(SYS_TPIDR_EL1,		HFGxTR, TPIDR_EL1, 1),
+	SR_FGT(SYS_TCR_EL1,		HFGxTR, TCR_EL1, 1),
+	SR_FGT(SYS_SCXTNUM_EL0,		HFGxTR, SCXTNUM_EL0, 1),
+	SR_FGT(SYS_SCXTNUM_EL1, 	HFGxTR, SCXTNUM_EL1, 1),
+	SR_FGT(SYS_SCTLR_EL1, 		HFGxTR, SCTLR_EL1, 1),
+	SR_FGT(SYS_REVIDR_EL1, 		HFGxTR, REVIDR_EL1, 1),
+	SR_FGT(SYS_PAR_EL1, 		HFGxTR, PAR_EL1, 1),
+	SR_FGT(SYS_MPIDR_EL1, 		HFGxTR, MPIDR_EL1, 1),
+	SR_FGT(SYS_MIDR_EL1, 		HFGxTR, MIDR_EL1, 1),
+	SR_FGT(SYS_MAIR_EL1, 		HFGxTR, MAIR_EL1, 1),
+	SR_FGT(SYS_LORSA_EL1, 		HFGxTR, LORSA_EL1, 1),
+	SR_FGT(SYS_LORN_EL1, 		HFGxTR, LORN_EL1, 1),
+	SR_FGT(SYS_LORID_EL1, 		HFGxTR, LORID_EL1, 1),
+	SR_FGT(SYS_LOREA_EL1, 		HFGxTR, LOREA_EL1, 1),
+	SR_FGT(SYS_LORC_EL1, 		HFGxTR, LORC_EL1, 1),
+	SR_FGT(SYS_ISR_EL1, 		HFGxTR, ISR_EL1, 1),
+	SR_FGT(SYS_FAR_EL1, 		HFGxTR, FAR_EL1, 1),
+	SR_FGT(SYS_ESR_EL1, 		HFGxTR, ESR_EL1, 1),
+	SR_FGT(SYS_DCZID_EL0, 		HFGxTR, DCZID_EL0, 1),
+	SR_FGT(SYS_CTR_EL0, 		HFGxTR, CTR_EL0, 1),
+	SR_FGT(SYS_CSSELR_EL1, 		HFGxTR, CSSELR_EL1, 1),
+	SR_FGT(SYS_CPACR_EL1, 		HFGxTR, CPACR_EL1, 1),
+	SR_FGT(SYS_CONTEXTIDR_EL1, 	HFGxTR, CONTEXTIDR_EL1, 1),
+	SR_FGT(SYS_CLIDR_EL1, 		HFGxTR, CLIDR_EL1, 1),
+	SR_FGT(SYS_CCSIDR_EL1, 		HFGxTR, CCSIDR_EL1, 1),
+	SR_FGT(SYS_APIBKEYLO_EL1, 	HFGxTR, APIBKey, 1),
+	SR_FGT(SYS_APIBKEYHI_EL1, 	HFGxTR, APIBKey, 1),
+	SR_FGT(SYS_APIAKEYLO_EL1, 	HFGxTR, APIAKey, 1),
+	SR_FGT(SYS_APIAKEYHI_EL1, 	HFGxTR, APIAKey, 1),
+	SR_FGT(SYS_APGAKEYLO_EL1, 	HFGxTR, APGAKey, 1),
+	SR_FGT(SYS_APGAKEYHI_EL1, 	HFGxTR, APGAKey, 1),
+	SR_FGT(SYS_APDBKEYLO_EL1, 	HFGxTR, APDBKey, 1),
+	SR_FGT(SYS_APDBKEYHI_EL1, 	HFGxTR, APDBKey, 1),
+	SR_FGT(SYS_APDAKEYLO_EL1, 	HFGxTR, APDAKey, 1),
+	SR_FGT(SYS_APDAKEYHI_EL1, 	HFGxTR, APDAKey, 1),
+	SR_FGT(SYS_AMAIR_EL1, 		HFGxTR, AMAIR_EL1, 1),
+	SR_FGT(SYS_AIDR_EL1, 		HFGxTR, AIDR_EL1, 1),
+	SR_FGT(SYS_AFSR1_EL1, 		HFGxTR, AFSR1_EL1, 1),
+	SR_FGT(SYS_AFSR0_EL1, 		HFGxTR, AFSR0_EL1, 1),
+	/* HFGITR_EL2 */
+	SR_FGT(OP_BRB_IALL, 		HFGITR, nBRBIALL, 0),
+	SR_FGT(OP_BRB_INJ, 		HFGITR, nBRBINJ, 0),
+	SR_FGT(SYS_DC_CVAC, 		HFGITR, DCCVAC, 1),
+	SR_FGT(SYS_DC_CGVAC, 		HFGITR, DCCVAC, 1),
+	SR_FGT(SYS_DC_CGDVAC, 		HFGITR, DCCVAC, 1),
+	SR_FGT(OP_CPP_RCTX, 		HFGITR, CPPRCTX, 1),
+	SR_FGT(OP_DVP_RCTX, 		HFGITR, DVPRCTX, 1),
+	SR_FGT(OP_CFP_RCTX, 		HFGITR, CFPRCTX, 1),
+	SR_FGT(OP_TLBI_VAALE1, 		HFGITR, TLBIVAALE1, 1),
+	SR_FGT(OP_TLBI_VALE1, 		HFGITR, TLBIVALE1, 1),
+	SR_FGT(OP_TLBI_VAAE1, 		HFGITR, TLBIVAAE1, 1),
+	SR_FGT(OP_TLBI_ASIDE1, 		HFGITR, TLBIASIDE1, 1),
+	SR_FGT(OP_TLBI_VAE1, 		HFGITR, TLBIVAE1, 1),
+	SR_FGT(OP_TLBI_VMALLE1, 	HFGITR, TLBIVMALLE1, 1),
+	SR_FGT(OP_TLBI_RVAALE1, 	HFGITR, TLBIRVAALE1, 1),
+	SR_FGT(OP_TLBI_RVALE1, 		HFGITR, TLBIRVALE1, 1),
+	SR_FGT(OP_TLBI_RVAAE1, 		HFGITR, TLBIRVAAE1, 1),
+	SR_FGT(OP_TLBI_RVAE1, 		HFGITR, TLBIRVAE1, 1),
+	SR_FGT(OP_TLBI_RVAALE1IS, 	HFGITR, TLBIRVAALE1IS, 1),
+	SR_FGT(OP_TLBI_RVALE1IS, 	HFGITR, TLBIRVALE1IS, 1),
+	SR_FGT(OP_TLBI_RVAAE1IS, 	HFGITR, TLBIRVAAE1IS, 1),
+	SR_FGT(OP_TLBI_RVAE1IS, 	HFGITR, TLBIRVAE1IS, 1),
+	SR_FGT(OP_TLBI_VAALE1IS, 	HFGITR, TLBIVAALE1IS, 1),
+	SR_FGT(OP_TLBI_VALE1IS, 	HFGITR, TLBIVALE1IS, 1),
+	SR_FGT(OP_TLBI_VAAE1IS, 	HFGITR, TLBIVAAE1IS, 1),
+	SR_FGT(OP_TLBI_ASIDE1IS, 	HFGITR, TLBIASIDE1IS, 1),
+	SR_FGT(OP_TLBI_VAE1IS, 		HFGITR, TLBIVAE1IS, 1),
+	SR_FGT(OP_TLBI_VMALLE1IS, 	HFGITR, TLBIVMALLE1IS, 1),
+	SR_FGT(OP_TLBI_RVAALE1OS, 	HFGITR, TLBIRVAALE1OS, 1),
+	SR_FGT(OP_TLBI_RVALE1OS, 	HFGITR, TLBIRVALE1OS, 1),
+	SR_FGT(OP_TLBI_RVAAE1OS, 	HFGITR, TLBIRVAAE1OS, 1),
+	SR_FGT(OP_TLBI_RVAE1OS, 	HFGITR, TLBIRVAE1OS, 1),
+	SR_FGT(OP_TLBI_VAALE1OS, 	HFGITR, TLBIVAALE1OS, 1),
+	SR_FGT(OP_TLBI_VALE1OS, 	HFGITR, TLBIVALE1OS, 1),
+	SR_FGT(OP_TLBI_VAAE1OS, 	HFGITR, TLBIVAAE1OS, 1),
+	SR_FGT(OP_TLBI_ASIDE1OS, 	HFGITR, TLBIASIDE1OS, 1),
+	SR_FGT(OP_TLBI_VAE1OS, 		HFGITR, TLBIVAE1OS, 1),
+	SR_FGT(OP_TLBI_VMALLE1OS, 	HFGITR, TLBIVMALLE1OS, 1),
+	/* nXS variants must be checked against HCRX_EL2.FGTnXS */
+	SR_FGF(OP_TLBI_VAALE1NXS, 	HFGITR, TLBIVAALE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VALE1NXS, 	HFGITR, TLBIVALE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAAE1NXS, 	HFGITR, TLBIVAAE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_ASIDE1NXS, 	HFGITR, TLBIASIDE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAE1NXS, 	HFGITR, TLBIVAE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VMALLE1NXS, 	HFGITR, TLBIVMALLE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAALE1NXS, 	HFGITR, TLBIRVAALE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVALE1NXS, 	HFGITR, TLBIRVALE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAAE1NXS, 	HFGITR, TLBIRVAAE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAE1NXS, 	HFGITR, TLBIRVAE1, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAALE1ISNXS, 	HFGITR, TLBIRVAALE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVALE1ISNXS, 	HFGITR, TLBIRVALE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAAE1ISNXS, 	HFGITR, TLBIRVAAE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAE1ISNXS, 	HFGITR, TLBIRVAE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAALE1ISNXS, 	HFGITR, TLBIVAALE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VALE1ISNXS, 	HFGITR, TLBIVALE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAAE1ISNXS, 	HFGITR, TLBIVAAE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_ASIDE1ISNXS, 	HFGITR, TLBIASIDE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAE1ISNXS, 	HFGITR, TLBIVAE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VMALLE1ISNXS, 	HFGITR, TLBIVMALLE1IS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAALE1OSNXS, 	HFGITR, TLBIRVAALE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVALE1OSNXS, 	HFGITR, TLBIRVALE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAAE1OSNXS, 	HFGITR, TLBIRVAAE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_RVAE1OSNXS, 	HFGITR, TLBIRVAE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAALE1OSNXS, 	HFGITR, TLBIVAALE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VALE1OSNXS, 	HFGITR, TLBIVALE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAAE1OSNXS, 	HFGITR, TLBIVAAE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_ASIDE1OSNXS, 	HFGITR, TLBIASIDE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VAE1OSNXS, 	HFGITR, TLBIVAE1OS, 1, HCRX_FGTnXS),
+	SR_FGF(OP_TLBI_VMALLE1OSNXS, 	HFGITR, TLBIVMALLE1OS, 1, HCRX_FGTnXS),
+	SR_FGT(OP_AT_S1E1WP, 		HFGITR, ATS1E1WP, 1),
+	SR_FGT(OP_AT_S1E1RP, 		HFGITR, ATS1E1RP, 1),
+	SR_FGT(OP_AT_S1E0W, 		HFGITR, ATS1E0W, 1),
+	SR_FGT(OP_AT_S1E0R, 		HFGITR, ATS1E0R, 1),
+	SR_FGT(OP_AT_S1E1W, 		HFGITR, ATS1E1W, 1),
+	SR_FGT(OP_AT_S1E1R, 		HFGITR, ATS1E1R, 1),
+	SR_FGT(SYS_DC_ZVA, 		HFGITR, DCZVA, 1),
+	SR_FGT(SYS_DC_GVA, 		HFGITR, DCZVA, 1),
+	SR_FGT(SYS_DC_GZVA, 		HFGITR, DCZVA, 1),
+	SR_FGT(SYS_DC_CIVAC, 		HFGITR, DCCIVAC, 1),
+	SR_FGT(SYS_DC_CIGVAC, 		HFGITR, DCCIVAC, 1),
+	SR_FGT(SYS_DC_CIGDVAC, 		HFGITR, DCCIVAC, 1),
+	SR_FGT(SYS_DC_CVADP, 		HFGITR, DCCVADP, 1),
+	SR_FGT(SYS_DC_CGVADP, 		HFGITR, DCCVADP, 1),
+	SR_FGT(SYS_DC_CGDVADP, 		HFGITR, DCCVADP, 1),
+	SR_FGT(SYS_DC_CVAP, 		HFGITR, DCCVAP, 1),
+	SR_FGT(SYS_DC_CGVAP, 		HFGITR, DCCVAP, 1),
+	SR_FGT(SYS_DC_CGDVAP, 		HFGITR, DCCVAP, 1),
+	SR_FGT(SYS_DC_CVAU, 		HFGITR, DCCVAU, 1),
+	SR_FGT(SYS_DC_CISW, 		HFGITR, DCCISW, 1),
+	SR_FGT(SYS_DC_CIGSW, 		HFGITR, DCCISW, 1),
+	SR_FGT(SYS_DC_CIGDSW, 		HFGITR, DCCISW, 1),
+	SR_FGT(SYS_DC_CSW, 		HFGITR, DCCSW, 1),
+	SR_FGT(SYS_DC_CGSW, 		HFGITR, DCCSW, 1),
+	SR_FGT(SYS_DC_CGDSW, 		HFGITR, DCCSW, 1),
+	SR_FGT(SYS_DC_ISW, 		HFGITR, DCISW, 1),
+	SR_FGT(SYS_DC_IGSW, 		HFGITR, DCISW, 1),
+	SR_FGT(SYS_DC_IGDSW, 		HFGITR, DCISW, 1),
+	SR_FGT(SYS_DC_IVAC, 		HFGITR, DCIVAC, 1),
+	SR_FGT(SYS_DC_IGVAC, 		HFGITR, DCIVAC, 1),
+	SR_FGT(SYS_DC_IGDVAC, 		HFGITR, DCIVAC, 1),
+	SR_FGT(SYS_IC_IVAU, 		HFGITR, ICIVAU, 1),
+	SR_FGT(SYS_IC_IALLU, 		HFGITR, ICIALLU, 1),
+	SR_FGT(SYS_IC_IALLUIS, 		HFGITR, ICIALLUIS, 1),
+	/* HDFGRTR_EL2 */
+	SR_FGT(SYS_PMBIDR_EL1, 		HDFGRTR, PMBIDR_EL1, 1),
+	SR_FGT(SYS_PMSNEVFR_EL1, 	HDFGRTR, nPMSNEVFR_EL1, 0),
+	SR_FGT(SYS_BRBINF_EL1(0), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(1), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(2), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(3), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(4), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(5), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(6), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(7), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(8), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(9), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(10), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(11), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(12), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(13), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(14), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(15), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(16), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(17), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(18), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(19), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(20), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(21), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(22), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(23), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(24), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(25), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(26), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(27), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(28), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(29), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(30), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINF_EL1(31), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBINFINJ_EL1, 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(0), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(1), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(2), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(3), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(4), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(5), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(6), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(7), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(8), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(9), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(10), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(11), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(12), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(13), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(14), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(15), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(16), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(17), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(18), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(19), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(20), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(21), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(22), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(23), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(24), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(25), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(26), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(27), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(28), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(29), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(30), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRC_EL1(31), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBSRCINJ_EL1, 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(0), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(1), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(2), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(3), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(4), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(5), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(6), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(7), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(8), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(9), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(10), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(11), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(12), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(13), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(14), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(15), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(16), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(17), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(18), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(19), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(20), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(21), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(22), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(23), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(24), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(25), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(26), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(27), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(28), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(29), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(30), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGT_EL1(31), 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTGTINJ_EL1, 	HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBTS_EL1, 		HDFGRTR, nBRBDATA, 0),
+	SR_FGT(SYS_BRBCR_EL1, 		HDFGRTR, nBRBCTL, 0),
+	SR_FGT(SYS_BRBFCR_EL1, 		HDFGRTR, nBRBCTL, 0),
+	SR_FGT(SYS_BRBIDR0_EL1, 	HDFGRTR, nBRBIDR, 0),
+	SR_FGT(SYS_PMCEID0_EL0, 	HDFGRTR, PMCEIDn_EL0, 1),
+	SR_FGT(SYS_PMCEID1_EL0, 	HDFGRTR, PMCEIDn_EL0, 1),
+	SR_FGT(SYS_PMUSERENR_EL0, 	HDFGRTR, PMUSERENR_EL0, 1),
+	SR_FGT(SYS_TRBTRG_EL1, 		HDFGRTR, TRBTRG_EL1, 1),
+	SR_FGT(SYS_TRBSR_EL1, 		HDFGRTR, TRBSR_EL1, 1),
+	SR_FGT(SYS_TRBPTR_EL1, 		HDFGRTR, TRBPTR_EL1, 1),
+	SR_FGT(SYS_TRBMAR_EL1, 		HDFGRTR, TRBMAR_EL1, 1),
+	SR_FGT(SYS_TRBLIMITR_EL1, 	HDFGRTR, TRBLIMITR_EL1, 1),
+	SR_FGT(SYS_TRBIDR_EL1, 		HDFGRTR, TRBIDR_EL1, 1),
+	SR_FGT(SYS_TRBBASER_EL1, 	HDFGRTR, TRBBASER_EL1, 1),
+	SR_FGT(SYS_TRCVICTLR, 		HDFGRTR, TRCVICTLR, 1),
+	SR_FGT(SYS_TRCSTATR, 		HDFGRTR, TRCSTATR, 1),
+	SR_FGT(SYS_TRCSSCSR(0), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(1), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(2), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(3), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(4), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(5), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(6), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSSCSR(7), 	HDFGRTR, TRCSSCSRn, 1),
+	SR_FGT(SYS_TRCSEQSTR, 		HDFGRTR, TRCSEQSTR, 1),
+	SR_FGT(SYS_TRCPRGCTLR, 		HDFGRTR, TRCPRGCTLR, 1),
+	SR_FGT(SYS_TRCOSLSR, 		HDFGRTR, TRCOSLSR, 1),
+	SR_FGT(SYS_TRCIMSPEC(0), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(1), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(2), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(3), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(4), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(5), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(6), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCIMSPEC(7), 	HDFGRTR, TRCIMSPECn, 1),
+	SR_FGT(SYS_TRCDEVARCH, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCDEVID, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR0, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR1, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR2, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR3, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR4, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR5, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR6, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR7, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR8, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR9, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR10, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR11, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR12, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCIDR13, 		HDFGRTR, TRCID, 1),
+	SR_FGT(SYS_TRCCNTVR(0), 	HDFGRTR, TRCCNTVRn, 1),
+	SR_FGT(SYS_TRCCNTVR(1), 	HDFGRTR, TRCCNTVRn, 1),
+	SR_FGT(SYS_TRCCNTVR(2), 	HDFGRTR, TRCCNTVRn, 1),
+	SR_FGT(SYS_TRCCNTVR(3), 	HDFGRTR, TRCCNTVRn, 1),
+	SR_FGT(SYS_TRCCLAIMCLR, 	HDFGRTR, TRCCLAIM, 1),
+	SR_FGT(SYS_TRCCLAIMSET, 	HDFGRTR, TRCCLAIM, 1),
+	SR_FGT(SYS_TRCAUXCTLR, 		HDFGRTR, TRCAUXCTLR, 1),
+	SR_FGT(SYS_TRCAUTHSTATUS, 	HDFGRTR, TRCAUTHSTATUS, 1),
+	SR_FGT(SYS_TRCACATR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(4), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(5), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(6), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(7), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(8), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(9), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(10), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(11), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(12), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(13), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(14), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACATR(15), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(0), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(1), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(2), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(3), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(4), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(5), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(6), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(7), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(8), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(9), 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(10), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(11), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(12), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(13), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(14), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCACVR(15), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCBBCTLR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCCCTLR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCCTLR0, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCCTLR1, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(4), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(5), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(6), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCIDCVR(7), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTCTLR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTCTLR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTCTLR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTCTLR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTRLDVR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTRLDVR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTRLDVR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCNTRLDVR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCCONFIGR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCEVENTCTL0R, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCEVENTCTL1R, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCEXTINSELR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCEXTINSELR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCEXTINSELR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCEXTINSELR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCQCTLR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(4), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(5), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(6), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(7), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(8), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(9), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(10), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(11), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(12), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(13), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(14), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(15), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(16), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(17), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(18), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(19), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(20), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(21), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(22), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(23), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(24), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(25), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(26), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(27), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(28), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(29), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(30), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSCTLR(31), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCRSR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSEQEVR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSEQEVR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSEQEVR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSEQRSTEVR, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(4), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(5), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(6), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSCCR(7), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(4), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(5), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(6), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSSPCICR(7), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSTALLCTLR, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCSYNCPR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCTRACEIDR, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCTSCTLR, 		HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVIIECTLR, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVIPCSSCTLR, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVISSCTLR, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCCTLR0, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCCTLR1, 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(0), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(1), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(2), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(3), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(4), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(5), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(6), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_TRCVMIDCVR(7), 	HDFGRTR, TRC, 1),
+	SR_FGT(SYS_PMSLATFR_EL1, 	HDFGRTR, PMSLATFR_EL1, 1),
+	SR_FGT(SYS_PMSIRR_EL1, 		HDFGRTR, PMSIRR_EL1, 1),
+	SR_FGT(SYS_PMSIDR_EL1, 		HDFGRTR, PMSIDR_EL1, 1),
+	SR_FGT(SYS_PMSICR_EL1, 		HDFGRTR, PMSICR_EL1, 1),
+	SR_FGT(SYS_PMSFCR_EL1, 		HDFGRTR, PMSFCR_EL1, 1),
+	SR_FGT(SYS_PMSEVFR_EL1, 	HDFGRTR, PMSEVFR_EL1, 1),
+	SR_FGT(SYS_PMSCR_EL1, 		HDFGRTR, PMSCR_EL1, 1),
+	SR_FGT(SYS_PMBSR_EL1, 		HDFGRTR, PMBSR_EL1, 1),
+	SR_FGT(SYS_PMBPTR_EL1, 		HDFGRTR, PMBPTR_EL1, 1),
+	SR_FGT(SYS_PMBLIMITR_EL1, 	HDFGRTR, PMBLIMITR_EL1, 1),
+	SR_FGT(SYS_PMMIR_EL1, 		HDFGRTR, PMMIR_EL1, 1),
+	SR_FGT(SYS_PMSELR_EL0, 		HDFGRTR, PMSELR_EL0, 1),
+	SR_FGT(SYS_PMOVSCLR_EL0, 	HDFGRTR, PMOVS, 1),
+	SR_FGT(SYS_PMOVSSET_EL0, 	HDFGRTR, PMOVS, 1),
+	SR_FGT(SYS_PMINTENCLR_EL1, 	HDFGRTR, PMINTEN, 1),
+	SR_FGT(SYS_PMINTENSET_EL1, 	HDFGRTR, PMINTEN, 1),
+	SR_FGT(SYS_PMCNTENCLR_EL0, 	HDFGRTR, PMCNTEN, 1),
+	SR_FGT(SYS_PMCNTENSET_EL0, 	HDFGRTR, PMCNTEN, 1),
+	SR_FGT(SYS_PMCCNTR_EL0, 	HDFGRTR, PMCCNTR_EL0, 1),
+	SR_FGT(SYS_PMCCFILTR_EL0, 	HDFGRTR, PMCCFILTR_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(0), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(1), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(2), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(3), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(4), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(5), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(6), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(7), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(8), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(9), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(10), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(11), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(12), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(13), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(14), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(15), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(16), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(17), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(18), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(19), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(20), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(21), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(22), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(23), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(24), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(25), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(26), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(27), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(28), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(29), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVTYPERn_EL0(30), 	HDFGRTR, PMEVTYPERn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(0), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(1), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(2), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(3), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(4), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(5), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(6), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(7), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(8), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(9), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(10), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(11), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(12), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(13), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(14), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(15), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(16), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(17), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(18), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(19), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(20), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(21), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(22), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(23), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(24), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(25), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(26), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(27), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(28), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(29), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_PMEVCNTRn_EL0(30), 	HDFGRTR, PMEVCNTRn_EL0, 1),
+	SR_FGT(SYS_OSDLR_EL1, 		HDFGRTR, OSDLR_EL1, 1),
+	SR_FGT(SYS_OSECCR_EL1, 		HDFGRTR, OSECCR_EL1, 1),
+	SR_FGT(SYS_OSLSR_EL1, 		HDFGRTR, OSLSR_EL1, 1),
+	SR_FGT(SYS_DBGPRCR_EL1, 	HDFGRTR, DBGPRCR_EL1, 1),
+	SR_FGT(SYS_DBGAUTHSTATUS_EL1, 	HDFGRTR, DBGAUTHSTATUS_EL1, 1),
+	SR_FGT(SYS_DBGCLAIMSET_EL1, 	HDFGRTR, DBGCLAIM, 1),
+	SR_FGT(SYS_DBGCLAIMCLR_EL1, 	HDFGRTR, DBGCLAIM, 1),
+	SR_FGT(SYS_MDSCR_EL1, 		HDFGRTR, MDSCR_EL1, 1),
+	/*
+	 * The trap bits capture *64* debug registers per bit, but the
+	 * ARM ARM only describes the encoding for the first 16, and
+	 * we don't really support more than that anyway.
+	 */
+	SR_FGT(SYS_DBGWVRn_EL1(0), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(1), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(2), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(3), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(4), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(5), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(6), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(7), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(8), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(9), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(10), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(11), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(12), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(13), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(14), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWVRn_EL1(15), 	HDFGRTR, DBGWVRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(0), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(1), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(2), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(3), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(4), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(5), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(6), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(7), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(8), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(9), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(10), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(11), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(12), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(13), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(14), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGWCRn_EL1(15), 	HDFGRTR, DBGWCRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(0), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(1), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(2), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(3), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(4), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(5), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(6), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(7), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(8), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(9), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(10), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(11), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(12), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(13), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(14), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBVRn_EL1(15), 	HDFGRTR, DBGBVRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(0), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(1), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(2), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(3), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(4), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(5), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(6), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(7), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(8), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(9), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(10), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(11), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(12), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(13), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(14), 	HDFGRTR, DBGBCRn_EL1, 1),
+	SR_FGT(SYS_DBGBCRn_EL1(15), 	HDFGRTR, DBGBCRn_EL1, 1),
+	/*
+	 * HDFGWTR_EL2
+	 *
+	 * Although HDFGRTR_EL2 and HDFGWTR_EL2 registers largely
+	 * overlap in their bit assignment, there are a number of bits
+	 * that are RES0 on one side, and an actual trap bit on the
+	 * other.  The policy chosen here is to describe all the
+	 * read-side mappings, and only the write-side mappings that
+	 * differ from the read side, and the trap handler will pick
+	 * the correct shadow register based on the access type.
+	 */
+	SR_FGT(SYS_TRFCR_EL1,		HDFGWTR, TRFCR_EL1, 1),
+	SR_FGT(SYS_TRCOSLAR,		HDFGWTR, TRCOSLAR, 1),
+	SR_FGT(SYS_PMCR_EL0,		HDFGWTR, PMCR_EL0, 1),
+	SR_FGT(SYS_PMSWINC_EL0,		HDFGWTR, PMSWINC_EL0, 1),
+	SR_FGT(SYS_OSLAR_EL1,		HDFGWTR, OSLAR_EL1, 1),
+};
+
+static union trap_config get_trap_config(u32 sysreg)
+{
+	return (union trap_config) {
+		.val = xa_to_value(xa_load(&sr_forward_xa, sysreg)),
+	};
+}
+
+static __init void print_nv_trap_error(const struct encoding_to_trap_config *tc,
+				       const char *type, int err)
+{
+	kvm_err("%s line %d encoding range "
+		"(%d, %d, %d, %d, %d) - (%d, %d, %d, %d, %d) (err=%d)\n",
+		type, tc->line,
+		sys_reg_Op0(tc->encoding), sys_reg_Op1(tc->encoding),
+		sys_reg_CRn(tc->encoding), sys_reg_CRm(tc->encoding),
+		sys_reg_Op2(tc->encoding),
+		sys_reg_Op0(tc->end), sys_reg_Op1(tc->end),
+		sys_reg_CRn(tc->end), sys_reg_CRm(tc->end),
+		sys_reg_Op2(tc->end),
+		err);
+}
+
+int __init populate_nv_trap_config(void)
+{
+	int ret = 0;
+
+	BUILD_BUG_ON(sizeof(union trap_config) != sizeof(void *));
+	BUILD_BUG_ON(__NR_CGT_GROUP_IDS__ > BIT(TC_CGT_BITS));
+	BUILD_BUG_ON(__NR_FGT_GROUP_IDS__ > BIT(TC_FGT_BITS));
+	BUILD_BUG_ON(__NR_FG_FILTER_IDS__ > BIT(TC_FGF_BITS));
+
+	for (int i = 0; i < ARRAY_SIZE(encoding_to_cgt); i++) {
+		const struct encoding_to_trap_config *cgt = &encoding_to_cgt[i];
+		void *prev;
+
+		if (cgt->tc.val & BIT(63)) {
+			kvm_err("CGT[%d] has MBZ bit set\n", i);
+			ret = -EINVAL;
+		}
+
+		if (cgt->encoding != cgt->end) {
+			prev = xa_store_range(&sr_forward_xa,
+					      cgt->encoding, cgt->end,
+					      xa_mk_value(cgt->tc.val),
+					      GFP_KERNEL);
+		} else {
+			prev = xa_store(&sr_forward_xa, cgt->encoding,
+					xa_mk_value(cgt->tc.val), GFP_KERNEL);
+			if (prev && !xa_is_err(prev)) {
+				ret = -EINVAL;
+				print_nv_trap_error(cgt, "Duplicate CGT", ret);
+			}
+		}
+
+		if (xa_is_err(prev)) {
+			ret = xa_err(prev);
+			print_nv_trap_error(cgt, "Failed CGT insertion", ret);
+		}
+	}
+
+	kvm_info("nv: %ld coarse grained trap handlers\n",
+		 ARRAY_SIZE(encoding_to_cgt));
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT))
+		goto check_mcb;
+
+	for (int i = 0; i < ARRAY_SIZE(encoding_to_fgt); i++) {
+		const struct encoding_to_trap_config *fgt = &encoding_to_fgt[i];
+		union trap_config tc;
+
+		if (fgt->tc.fgt >= __NR_FGT_GROUP_IDS__) {
+			ret = -EINVAL;
+			print_nv_trap_error(fgt, "Invalid FGT", ret);
+		}
+
+		tc = get_trap_config(fgt->encoding);
+
+		if (tc.fgt) {
+			ret = -EINVAL;
+			print_nv_trap_error(fgt, "Duplicate FGT", ret);
+		}
+
+		tc.val |= fgt->tc.val;
+		xa_store(&sr_forward_xa, fgt->encoding,
+			 xa_mk_value(tc.val), GFP_KERNEL);
+	}
+
+	kvm_info("nv: %ld fine grained trap handlers\n",
+		 ARRAY_SIZE(encoding_to_fgt));
+
+check_mcb:
+	for (int id = __MULTIPLE_CONTROL_BITS__; id < __COMPLEX_CONDITIONS__; id++) {
+		const enum cgt_group_id *cgids;
+
+		cgids = coarse_control_combo[id - __MULTIPLE_CONTROL_BITS__];
+
+		for (int i = 0; cgids[i] != __RESERVED__; i++) {
+			if (cgids[i] >= __MULTIPLE_CONTROL_BITS__) {
+				kvm_err("Recursive MCB %d/%d\n", id, cgids[i]);
+				ret = -EINVAL;
+			}
+		}
+	}
+
+	if (ret)
+		xa_destroy(&sr_forward_xa);
+
+	return ret;
+}
+
+static enum trap_behaviour get_behaviour(struct kvm_vcpu *vcpu,
+					 const struct trap_bits *tb)
+{
+	enum trap_behaviour b = BEHAVE_HANDLE_LOCALLY;
+	u64 val;
+
+	val = __vcpu_sys_reg(vcpu, tb->index);
+	if ((val & tb->mask) == tb->value)
+		b |= tb->behaviour;
+
+	return b;
+}
+
+static enum trap_behaviour __compute_trap_behaviour(struct kvm_vcpu *vcpu,
+						    const enum cgt_group_id id,
+						    enum trap_behaviour b)
+{
+	switch (id) {
+		const enum cgt_group_id *cgids;
+
+	case __RESERVED__ ... __MULTIPLE_CONTROL_BITS__ - 1:
+		if (likely(id != __RESERVED__))
+			b |= get_behaviour(vcpu, &coarse_trap_bits[id]);
+		break;
+	case __MULTIPLE_CONTROL_BITS__ ... __COMPLEX_CONDITIONS__ - 1:
+		/* Yes, this is recursive. Don't do anything stupid. */
+		cgids = coarse_control_combo[id - __MULTIPLE_CONTROL_BITS__];
+		for (int i = 0; cgids[i] != __RESERVED__; i++)
+			b |= __compute_trap_behaviour(vcpu, cgids[i], b);
+		break;
+	default:
+		if (ARRAY_SIZE(ccc))
+			b |= ccc[id -  __COMPLEX_CONDITIONS__](vcpu);
+		break;
+	}
+
+	return b;
+}
+
+static enum trap_behaviour compute_trap_behaviour(struct kvm_vcpu *vcpu,
+						  const union trap_config tc)
+{
+	enum trap_behaviour b = BEHAVE_HANDLE_LOCALLY;
+
+	return __compute_trap_behaviour(vcpu, tc.cgt, b);
+}
+
+static bool check_fgt_bit(u64 val, const union trap_config tc)
+{
+	return ((val >> tc.bit) & 1) == tc.pol;
+}
+
+#define sanitised_sys_reg(vcpu, reg)			\
+	({						\
+		u64 __val;				\
+		__val = __vcpu_sys_reg(vcpu, reg);	\
+		__val &= ~__ ## reg ## _RES0;		\
+		(__val);				\
+	})
+
+bool __check_nv_sr_forward(struct kvm_vcpu *vcpu)
+{
+	union trap_config tc;
+	enum trap_behaviour b;
+	bool is_read;
+	u32 sysreg;
+	u64 esr, val;
+
+	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
+		return false;
+
+	esr = kvm_vcpu_get_esr(vcpu);
+	sysreg = esr_sys64_to_sysreg(esr);
+	is_read = (esr & ESR_ELx_SYS64_ISS_DIR_MASK) == ESR_ELx_SYS64_ISS_DIR_READ;
+
+	tc = get_trap_config(sysreg);
+
+	/*
+	 * A value of 0 for the whole entry means that we know nothing
+	 * for this sysreg, and that it cannot be re-injected into the
+	 * nested hypervisor. In this situation, let's cut it short.
+	 *
+	 * Note that ultimately, we could also make use of the xarray
+	 * to store the index of the sysreg in the local descriptor
+	 * array, avoiding another search... Hint, hint...
+	 */
+	if (!tc.val)
+		return false;
+
+	switch ((enum fgt_group_id)tc.fgt) {
+	case __NO_FGT_GROUP__:
+		break;
+
+	case HFGxTR_GROUP:
+		if (is_read)
+			val = sanitised_sys_reg(vcpu, HFGRTR_EL2);
+		else
+			val = sanitised_sys_reg(vcpu, HFGWTR_EL2);
+		break;
+
+	case HDFGRTR_GROUP:
+	case HDFGWTR_GROUP:
+		if (is_read)
+			val = sanitised_sys_reg(vcpu, HDFGRTR_EL2);
+		else
+			val = sanitised_sys_reg(vcpu, HDFGWTR_EL2);
+		break;
+
+	case HFGITR_GROUP:
+		val = sanitised_sys_reg(vcpu, HFGITR_EL2);
+		switch (tc.fgf) {
+			u64 tmp;
+
+		case __NO_FGF__:
+			break;
+
+		case HCRX_FGTnXS:
+			tmp = sanitised_sys_reg(vcpu, HCRX_EL2);
+			if (tmp & HCRX_EL2_FGTnXS)
+				tc.fgt = __NO_FGT_GROUP__;
+		}
+		break;
+
+	case __NR_FGT_GROUP_IDS__:
+		/* Something is really wrong, bail out */
+		WARN_ONCE(1, "__NR_FGT_GROUP_IDS__");
+		return false;
+	}
+
+	if (tc.fgt != __NO_FGT_GROUP__ && check_fgt_bit(val, tc))
+		goto inject;
+
+	b = compute_trap_behaviour(vcpu, tc);
+
+	if (((b & BEHAVE_FORWARD_READ) && is_read) ||
+	    ((b & BEHAVE_FORWARD_WRITE) && !is_read))
+		goto inject;
+
+	return false;
+
+inject:
+	trace_kvm_forward_sysreg_trap(vcpu, sysreg, is_read);
+
+	kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
+	return true;
+}
+
+static u64 kvm_check_illegal_exception_return(struct kvm_vcpu *vcpu, u64 spsr)
+{
+	u64 mode = spsr & PSR_MODE_MASK;
+
+	/*
+	 * Possible causes for an Illegal Exception Return from EL2:
+	 * - trying to return to EL3
+	 * - trying to return to an illegal M value
+	 * - trying to return to a 32bit EL
+	 * - trying to return to EL1 with HCR_EL2.TGE set
+	 */
+	if (mode == PSR_MODE_EL3t   || mode == PSR_MODE_EL3h ||
+	    mode == 0b00001         || (mode & BIT(1))       ||
+	    (spsr & PSR_MODE32_BIT) ||
+	    (vcpu_el2_tge_is_set(vcpu) && (mode == PSR_MODE_EL1t ||
+					   mode == PSR_MODE_EL1h))) {
+		/*
+		 * The guest is playing with our nerves. Preserve EL, SP,
+		 * masks, flags from the existing PSTATE, and set IL.
+		 * The HW will then generate an Illegal State Exception
+		 * immediately after ERET.
+		 */
+		spsr = *vcpu_cpsr(vcpu);
+
+		spsr &= (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT |
+			 PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT | PSR_V_BIT |
+			 PSR_MODE_MASK | PSR_MODE32_BIT);
+		spsr |= PSR_IL_BIT;
+	}
+
+	return spsr;
+}
+
+void kvm_emulate_nested_eret(struct kvm_vcpu *vcpu)
+{
+	u64 spsr, elr, mode;
+	bool direct_eret;
+
+	/*
+	 * Going through the whole put/load motions is a waste of time
+	 * if this is a VHE guest hypervisor returning to its own
+	 * userspace, or the hypervisor performing a local exception
+	 * return. No need to save/restore registers, no need to
+	 * switch S2 MMU. Just do the canonical ERET.
+	 */
+	spsr = vcpu_read_sys_reg(vcpu, SPSR_EL2);
+	spsr = kvm_check_illegal_exception_return(vcpu, spsr);
+
+	mode = spsr & (PSR_MODE_MASK | PSR_MODE32_BIT);
+
+	direct_eret  = (mode == PSR_MODE_EL0t &&
+			vcpu_el2_e2h_is_set(vcpu) &&
+			vcpu_el2_tge_is_set(vcpu));
+	direct_eret |= (mode == PSR_MODE_EL2h || mode == PSR_MODE_EL2t);
+
+	if (direct_eret) {
+		*vcpu_pc(vcpu) = vcpu_read_sys_reg(vcpu, ELR_EL2);
+		*vcpu_cpsr(vcpu) = spsr;
+		trace_kvm_nested_eret(vcpu, *vcpu_pc(vcpu), spsr);
+		return;
+	}
+
+	preempt_disable();
+	kvm_arch_vcpu_put(vcpu);
+
+	elr = __vcpu_sys_reg(vcpu, ELR_EL2);
+
+	trace_kvm_nested_eret(vcpu, elr, spsr);
+
+	/*
+	 * Note that the current exception level is always the virtual EL2,
+	 * since we set HCR_EL2.NV bit only when entering the virtual EL2.
+	 */
+	*vcpu_pc(vcpu) = elr;
+	*vcpu_cpsr(vcpu) = spsr;
+
+	kvm_arch_vcpu_load(vcpu, smp_processor_id());
+	preempt_enable();
+}
+
+static void kvm_inject_el2_exception(struct kvm_vcpu *vcpu, u64 esr_el2,
+				     enum exception_type type)
+{
+	trace_kvm_inject_nested_exception(vcpu, esr_el2, type);
+
+	switch (type) {
+	case except_type_sync:
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SYNC);
+		vcpu_write_sys_reg(vcpu, esr_el2, ESR_EL2);
+		break;
+	case except_type_irq:
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_IRQ);
+		break;
+	default:
+		WARN_ONCE(1, "Unsupported EL2 exception injection %d\n", type);
+	}
+}
+
+/*
+ * Emulate taking an exception to EL2.
+ * See ARM ARM J8.1.2 AArch64.TakeException()
+ */
+static int kvm_inject_nested(struct kvm_vcpu *vcpu, u64 esr_el2,
+			     enum exception_type type)
+{
+	u64 pstate, mode;
+	bool direct_inject;
+
+	if (!vcpu_has_nv(vcpu)) {
+		kvm_err("Unexpected call to %s for the non-nesting configuration\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * As for ERET, we can avoid doing too much on the injection path by
+	 * checking that we either took the exception from a VHE host
+	 * userspace or from vEL2. In these cases, there is no change in
+	 * translation regime (or anything else), so let's do as little as
+	 * possible.
+	 */
+	pstate = *vcpu_cpsr(vcpu);
+	mode = pstate & (PSR_MODE_MASK | PSR_MODE32_BIT);
+
+	direct_inject  = (mode == PSR_MODE_EL0t &&
+			  vcpu_el2_e2h_is_set(vcpu) &&
+			  vcpu_el2_tge_is_set(vcpu));
+	direct_inject |= (mode == PSR_MODE_EL2h || mode == PSR_MODE_EL2t);
+
+	if (direct_inject) {
+		kvm_inject_el2_exception(vcpu, esr_el2, type);
+		return 1;
+	}
+
+	preempt_disable();
+
+	/*
+	 * We may have an exception or PC update in the EL0/EL1 context.
+	 * Commit it before entering EL2.
+	 */
+	__kvm_adjust_pc(vcpu);
+
+	kvm_arch_vcpu_put(vcpu);
+
+	kvm_inject_el2_exception(vcpu, esr_el2, type);
+
+	/*
+	 * A hard requirement is that a switch between EL1 and EL2
+	 * contexts has to happen between a put/load, so that we can
+	 * pick the correct timer and interrupt configuration, among
+	 * other things.
+	 *
+	 * Make sure the exception actually took place before we load
+	 * the new context.
+	 */
+	__kvm_adjust_pc(vcpu);
+
+	kvm_arch_vcpu_load(vcpu, smp_processor_id());
+	preempt_enable();
+
+	return 1;
+}
+
+int kvm_inject_nested_sync(struct kvm_vcpu *vcpu, u64 esr_el2)
+{
+	return kvm_inject_nested(vcpu, esr_el2, except_type_sync);
+}
+
+int kvm_inject_nested_irq(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Do not inject an irq if the:
+	 *  - Current exception level is EL2, and
+	 *  - virtual HCR_EL2.TGE == 0
+	 *  - virtual HCR_EL2.IMO == 0
+	 *
+	 * See Table D1-17 "Physical interrupt target and masking when EL3 is
+	 * not implemented and EL2 is implemented" in ARM DDI 0487C.a.
+	 */
+
+	if (vcpu_is_el2(vcpu) && !vcpu_el2_tge_is_set(vcpu) &&
+	    !(__vcpu_sys_reg(vcpu, HCR_EL2) & HCR_IMO))
+		return 1;
+
+	/* esr_el2 value doesn't matter for exits due to irqs. */
+	return kvm_inject_nested(vcpu, 0, except_type_irq);
+}
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
new file mode 100644
index 000000000..8c1d0d485
--- /dev/null
+++ b/arch/arm64/kvm/fpsimd.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/arm64/kvm/fpsimd.c: Guest/host FPSIMD context coordination helpers
+ *
+ * Copyright 2018 Arm Limited
+ * Author: Dave Martin <Dave.Martin@arm.com>
+ */
+#include <linux/irqflags.h>
+#include <linux/sched.h>
+#include <linux/kvm_host.h>
+#include <asm/fpsimd.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/sysreg.h>
+
+void kvm_vcpu_unshare_task_fp(struct kvm_vcpu *vcpu)
+{
+	struct task_struct *p = vcpu->arch.parent_task;
+	struct user_fpsimd_state *fpsimd;
+
+	if (!is_protected_kvm_enabled() || !p)
+		return;
+
+	fpsimd = &p->thread.uw.fpsimd_state;
+	kvm_unshare_hyp(fpsimd, fpsimd + 1);
+	put_task_struct(p);
+}
+
+/*
+ * Called on entry to KVM_RUN unless this vcpu previously ran at least
+ * once and the most recent prior KVM_RUN for this vcpu was called from
+ * the same task as current (highly likely).
+ *
+ * This is guaranteed to execute before kvm_arch_vcpu_load_fp(vcpu),
+ * such that on entering hyp the relevant parts of current are already
+ * mapped.
+ */
+int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	struct user_fpsimd_state *fpsimd = &current->thread.uw.fpsimd_state;
+
+	kvm_vcpu_unshare_task_fp(vcpu);
+
+	/* Make sure the host task fpsimd state is visible to hyp: */
+	ret = kvm_share_hyp(fpsimd, fpsimd + 1);
+	if (ret)
+		return ret;
+
+	vcpu->arch.host_fpsimd_state = kern_hyp_va(fpsimd);
+
+	/*
+	 * We need to keep current's task_struct pinned until its data has been
+	 * unshared with the hypervisor to make sure it is not re-used by the
+	 * kernel and donated to someone else while already shared -- see
+	 * kvm_vcpu_unshare_task_fp() for the matching put_task_struct().
+	 */
+	if (is_protected_kvm_enabled()) {
+		get_task_struct(current);
+		vcpu->arch.parent_task = current;
+	}
+
+	return 0;
+}
+
+/*
+ * Prepare vcpu for saving the host's FPSIMD state and loading the guest's.
+ * The actual loading is done by the FPSIMD access trap taken to hyp.
+ *
+ * Here, we just set the correct metadata to indicate that the FPSIMD
+ * state in the cpu regs (if any) belongs to current on the host.
+ */
+void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu)
+{
+	BUG_ON(!current->mm);
+
+	if (!system_supports_fpsimd())
+		return;
+
+	fpsimd_kvm_prepare();
+
+	/*
+	 * We will check TIF_FOREIGN_FPSTATE just before entering the
+	 * guest in kvm_arch_vcpu_ctxflush_fp() and override this to
+	 * FP_STATE_FREE if the flag set.
+	 */
+	vcpu->arch.fp_state = FP_STATE_HOST_OWNED;
+
+	vcpu_clear_flag(vcpu, HOST_SVE_ENABLED);
+	if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN)
+		vcpu_set_flag(vcpu, HOST_SVE_ENABLED);
+
+	if (system_supports_sme()) {
+		vcpu_clear_flag(vcpu, HOST_SME_ENABLED);
+		if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN)
+			vcpu_set_flag(vcpu, HOST_SME_ENABLED);
+
+		/*
+		 * If PSTATE.SM is enabled then save any pending FP
+		 * state and disable PSTATE.SM. If we leave PSTATE.SM
+		 * enabled and the guest does not enable SME via
+		 * CPACR_EL1.SMEN then operations that should be valid
+		 * may generate SME traps from EL1 to EL1 which we
+		 * can't intercept and which would confuse the guest.
+		 *
+		 * Do the same for PSTATE.ZA in the case where there
+		 * is state in the registers which has not already
+		 * been saved, this is very unlikely to happen.
+		 */
+		if (read_sysreg_s(SYS_SVCR) & (SVCR_SM_MASK | SVCR_ZA_MASK)) {
+			vcpu->arch.fp_state = FP_STATE_FREE;
+			fpsimd_save_and_flush_cpu_state();
+		}
+	}
+}
+
+/*
+ * Called just before entering the guest once we are no longer preemptable
+ * and interrupts are disabled. If we have managed to run anything using
+ * FP while we were preemptible (such as off the back of an interrupt),
+ * then neither the host nor the guest own the FP hardware (and it was the
+ * responsibility of the code that used FP to save the existing state).
+ */
+void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu)
+{
+	if (test_thread_flag(TIF_FOREIGN_FPSTATE))
+		vcpu->arch.fp_state = FP_STATE_FREE;
+}
+
+/*
+ * Called just after exiting the guest. If the guest FPSIMD state
+ * was loaded, update the host's context tracking data mark the CPU
+ * FPSIMD regs as dirty and belonging to vcpu so that they will be
+ * written back if the kernel clobbers them due to kernel-mode NEON
+ * before re-entry into the guest.
+ */
+void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
+{
+	struct cpu_fp_state fp_state;
+
+	WARN_ON_ONCE(!irqs_disabled());
+
+	if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) {
+
+		/*
+		 * Currently we do not support SME guests so SVCR is
+		 * always 0 and we just need a variable to point to.
+		 */
+		fp_state.st = &vcpu->arch.ctxt.fp_regs;
+		fp_state.sve_state = vcpu->arch.sve_state;
+		fp_state.sve_vl = vcpu->arch.sve_max_vl;
+		fp_state.sme_state = NULL;
+		fp_state.svcr = &vcpu->arch.svcr;
+		fp_state.fp_type = &vcpu->arch.fp_type;
+
+		if (vcpu_has_sve(vcpu))
+			fp_state.to_save = FP_STATE_SVE;
+		else
+			fp_state.to_save = FP_STATE_FPSIMD;
+
+		fpsimd_bind_state_to_cpu(&fp_state);
+
+		clear_thread_flag(TIF_FOREIGN_FPSTATE);
+	}
+}
+
+/*
+ * Write back the vcpu FPSIMD regs if they are dirty, and invalidate the
+ * cpu FPSIMD regs so that they can't be spuriously reused if this vcpu
+ * disappears and another task or vcpu appears that recycles the same
+ * struct fpsimd_state.
+ */
+void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/*
+	 * If we have VHE then the Hyp code will reset CPACR_EL1 to
+	 * the default value and we need to reenable SME.
+	 */
+	if (has_vhe() && system_supports_sme()) {
+		/* Also restore EL0 state seen on entry */
+		if (vcpu_get_flag(vcpu, HOST_SME_ENABLED))
+			sysreg_clear_set(CPACR_EL1, 0,
+					 CPACR_EL1_SMEN_EL0EN |
+					 CPACR_EL1_SMEN_EL1EN);
+		else
+			sysreg_clear_set(CPACR_EL1,
+					 CPACR_EL1_SMEN_EL0EN,
+					 CPACR_EL1_SMEN_EL1EN);
+		isb();
+	}
+
+	if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) {
+		if (vcpu_has_sve(vcpu)) {
+			__vcpu_sys_reg(vcpu, ZCR_EL1) = read_sysreg_el1(SYS_ZCR);
+
+			/* Restore the VL that was saved when bound to the CPU */
+			if (!has_vhe())
+				sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1,
+						       SYS_ZCR_EL1);
+		}
+
+		fpsimd_save_and_flush_cpu_state();
+	} else if (has_vhe() && system_supports_sve()) {
+		/*
+		 * The FPSIMD/SVE state in the CPU has not been touched, and we
+		 * have SVE (and VHE): CPACR_EL1 (alias CPTR_EL2) has been
+		 * reset by kvm_reset_cptr_el2() in the Hyp code, disabling SVE
+		 * for EL0.  To avoid spurious traps, restore the trap state
+		 * seen by kvm_arch_vcpu_load_fp():
+		 */
+		if (vcpu_get_flag(vcpu, HOST_SVE_ENABLED))
+			sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN);
+		else
+			sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0);
+	}
+
+	local_irq_restore(flags);
+}
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
new file mode 100644
index 000000000..a1710e5fa
--- /dev/null
+++ b/arch/arm64/kvm/guest.c
@@ -0,0 +1,1106 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/kvm/guest.c:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/nospec.h>
+#include <linux/kvm_host.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <kvm/arm_hypercalls.h>
+#include <asm/cputype.h>
+#include <linux/uaccess.h>
+#include <asm/fpsimd.h>
+#include <asm/kvm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_nested.h>
+#include <asm/sigcontext.h>
+
+#include "trace.h"
+
+const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
+	KVM_GENERIC_VM_STATS()
+};
+
+const struct kvm_stats_header kvm_vm_stats_header = {
+	.name_size = KVM_STATS_NAME_SIZE,
+	.num_desc = ARRAY_SIZE(kvm_vm_stats_desc),
+	.id_offset =  sizeof(struct kvm_stats_header),
+	.desc_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE,
+	.data_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE +
+		       sizeof(kvm_vm_stats_desc),
+};
+
+const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
+	KVM_GENERIC_VCPU_STATS(),
+	STATS_DESC_COUNTER(VCPU, hvc_exit_stat),
+	STATS_DESC_COUNTER(VCPU, wfe_exit_stat),
+	STATS_DESC_COUNTER(VCPU, wfi_exit_stat),
+	STATS_DESC_COUNTER(VCPU, mmio_exit_user),
+	STATS_DESC_COUNTER(VCPU, mmio_exit_kernel),
+	STATS_DESC_COUNTER(VCPU, signal_exits),
+	STATS_DESC_COUNTER(VCPU, exits)
+};
+
+const struct kvm_stats_header kvm_vcpu_stats_header = {
+	.name_size = KVM_STATS_NAME_SIZE,
+	.num_desc = ARRAY_SIZE(kvm_vcpu_stats_desc),
+	.id_offset = sizeof(struct kvm_stats_header),
+	.desc_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE,
+	.data_offset = sizeof(struct kvm_stats_header) + KVM_STATS_NAME_SIZE +
+		       sizeof(kvm_vcpu_stats_desc),
+};
+
+static bool core_reg_offset_is_vreg(u64 off)
+{
+	return off >= KVM_REG_ARM_CORE_REG(fp_regs.vregs) &&
+		off < KVM_REG_ARM_CORE_REG(fp_regs.fpsr);
+}
+
+static u64 core_reg_offset_from_id(u64 id)
+{
+	return id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK | KVM_REG_ARM_CORE);
+}
+
+static int core_reg_size_from_offset(const struct kvm_vcpu *vcpu, u64 off)
+{
+	int size;
+
+	switch (off) {
+	case KVM_REG_ARM_CORE_REG(regs.regs[0]) ...
+	     KVM_REG_ARM_CORE_REG(regs.regs[30]):
+	case KVM_REG_ARM_CORE_REG(regs.sp):
+	case KVM_REG_ARM_CORE_REG(regs.pc):
+	case KVM_REG_ARM_CORE_REG(regs.pstate):
+	case KVM_REG_ARM_CORE_REG(sp_el1):
+	case KVM_REG_ARM_CORE_REG(elr_el1):
+	case KVM_REG_ARM_CORE_REG(spsr[0]) ...
+	     KVM_REG_ARM_CORE_REG(spsr[KVM_NR_SPSR - 1]):
+		size = sizeof(__u64);
+		break;
+
+	case KVM_REG_ARM_CORE_REG(fp_regs.vregs[0]) ...
+	     KVM_REG_ARM_CORE_REG(fp_regs.vregs[31]):
+		size = sizeof(__uint128_t);
+		break;
+
+	case KVM_REG_ARM_CORE_REG(fp_regs.fpsr):
+	case KVM_REG_ARM_CORE_REG(fp_regs.fpcr):
+		size = sizeof(__u32);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if (!IS_ALIGNED(off, size / sizeof(__u32)))
+		return -EINVAL;
+
+	/*
+	 * The KVM_REG_ARM64_SVE regs must be used instead of
+	 * KVM_REG_ARM_CORE for accessing the FPSIMD V-registers on
+	 * SVE-enabled vcpus:
+	 */
+	if (vcpu_has_sve(vcpu) && core_reg_offset_is_vreg(off))
+		return -EINVAL;
+
+	return size;
+}
+
+static void *core_reg_addr(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	u64 off = core_reg_offset_from_id(reg->id);
+	int size = core_reg_size_from_offset(vcpu, off);
+
+	if (size < 0)
+		return NULL;
+
+	if (KVM_REG_SIZE(reg->id) != size)
+		return NULL;
+
+	switch (off) {
+	case KVM_REG_ARM_CORE_REG(regs.regs[0]) ...
+	     KVM_REG_ARM_CORE_REG(regs.regs[30]):
+		off -= KVM_REG_ARM_CORE_REG(regs.regs[0]);
+		off /= 2;
+		return &vcpu->arch.ctxt.regs.regs[off];
+
+	case KVM_REG_ARM_CORE_REG(regs.sp):
+		return &vcpu->arch.ctxt.regs.sp;
+
+	case KVM_REG_ARM_CORE_REG(regs.pc):
+		return &vcpu->arch.ctxt.regs.pc;
+
+	case KVM_REG_ARM_CORE_REG(regs.pstate):
+		return &vcpu->arch.ctxt.regs.pstate;
+
+	case KVM_REG_ARM_CORE_REG(sp_el1):
+		return __ctxt_sys_reg(&vcpu->arch.ctxt, SP_EL1);
+
+	case KVM_REG_ARM_CORE_REG(elr_el1):
+		return __ctxt_sys_reg(&vcpu->arch.ctxt, ELR_EL1);
+
+	case KVM_REG_ARM_CORE_REG(spsr[KVM_SPSR_EL1]):
+		return __ctxt_sys_reg(&vcpu->arch.ctxt, SPSR_EL1);
+
+	case KVM_REG_ARM_CORE_REG(spsr[KVM_SPSR_ABT]):
+		return &vcpu->arch.ctxt.spsr_abt;
+
+	case KVM_REG_ARM_CORE_REG(spsr[KVM_SPSR_UND]):
+		return &vcpu->arch.ctxt.spsr_und;
+
+	case KVM_REG_ARM_CORE_REG(spsr[KVM_SPSR_IRQ]):
+		return &vcpu->arch.ctxt.spsr_irq;
+
+	case KVM_REG_ARM_CORE_REG(spsr[KVM_SPSR_FIQ]):
+		return &vcpu->arch.ctxt.spsr_fiq;
+
+	case KVM_REG_ARM_CORE_REG(fp_regs.vregs[0]) ...
+	     KVM_REG_ARM_CORE_REG(fp_regs.vregs[31]):
+		off -= KVM_REG_ARM_CORE_REG(fp_regs.vregs[0]);
+		off /= 4;
+		return &vcpu->arch.ctxt.fp_regs.vregs[off];
+
+	case KVM_REG_ARM_CORE_REG(fp_regs.fpsr):
+		return &vcpu->arch.ctxt.fp_regs.fpsr;
+
+	case KVM_REG_ARM_CORE_REG(fp_regs.fpcr):
+		return &vcpu->arch.ctxt.fp_regs.fpcr;
+
+	default:
+		return NULL;
+	}
+}
+
+static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	/*
+	 * Because the kvm_regs structure is a mix of 32, 64 and
+	 * 128bit fields, we index it as if it was a 32bit
+	 * array. Hence below, nr_regs is the number of entries, and
+	 * off the index in the "array".
+	 */
+	__u32 __user *uaddr = (__u32 __user *)(unsigned long)reg->addr;
+	int nr_regs = sizeof(struct kvm_regs) / sizeof(__u32);
+	void *addr;
+	u32 off;
+
+	/* Our ID is an index into the kvm_regs struct. */
+	off = core_reg_offset_from_id(reg->id);
+	if (off >= nr_regs ||
+	    (off + (KVM_REG_SIZE(reg->id) / sizeof(__u32))) >= nr_regs)
+		return -ENOENT;
+
+	addr = core_reg_addr(vcpu, reg);
+	if (!addr)
+		return -EINVAL;
+
+	if (copy_to_user(uaddr, addr, KVM_REG_SIZE(reg->id)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	__u32 __user *uaddr = (__u32 __user *)(unsigned long)reg->addr;
+	int nr_regs = sizeof(struct kvm_regs) / sizeof(__u32);
+	__uint128_t tmp;
+	void *valp = &tmp, *addr;
+	u64 off;
+	int err = 0;
+
+	/* Our ID is an index into the kvm_regs struct. */
+	off = core_reg_offset_from_id(reg->id);
+	if (off >= nr_regs ||
+	    (off + (KVM_REG_SIZE(reg->id) / sizeof(__u32))) >= nr_regs)
+		return -ENOENT;
+
+	addr = core_reg_addr(vcpu, reg);
+	if (!addr)
+		return -EINVAL;
+
+	if (KVM_REG_SIZE(reg->id) > sizeof(tmp))
+		return -EINVAL;
+
+	if (copy_from_user(valp, uaddr, KVM_REG_SIZE(reg->id))) {
+		err = -EFAULT;
+		goto out;
+	}
+
+	if (off == KVM_REG_ARM_CORE_REG(regs.pstate)) {
+		u64 mode = (*(u64 *)valp) & PSR_AA32_MODE_MASK;
+		switch (mode) {
+		case PSR_AA32_MODE_USR:
+			if (!kvm_supports_32bit_el0())
+				return -EINVAL;
+			break;
+		case PSR_AA32_MODE_FIQ:
+		case PSR_AA32_MODE_IRQ:
+		case PSR_AA32_MODE_SVC:
+		case PSR_AA32_MODE_ABT:
+		case PSR_AA32_MODE_UND:
+			if (!vcpu_el1_is_32bit(vcpu))
+				return -EINVAL;
+			break;
+		case PSR_MODE_EL2h:
+		case PSR_MODE_EL2t:
+			if (!vcpu_has_nv(vcpu))
+				return -EINVAL;
+			fallthrough;
+		case PSR_MODE_EL0t:
+		case PSR_MODE_EL1t:
+		case PSR_MODE_EL1h:
+			if (vcpu_el1_is_32bit(vcpu))
+				return -EINVAL;
+			break;
+		default:
+			err = -EINVAL;
+			goto out;
+		}
+	}
+
+	memcpy(addr, valp, KVM_REG_SIZE(reg->id));
+
+	if (*vcpu_cpsr(vcpu) & PSR_MODE32_BIT) {
+		int i, nr_reg;
+
+		switch (*vcpu_cpsr(vcpu)) {
+		/*
+		 * Either we are dealing with user mode, and only the
+		 * first 15 registers (+ PC) must be narrowed to 32bit.
+		 * AArch32 r0-r14 conveniently map to AArch64 x0-x14.
+		 */
+		case PSR_AA32_MODE_USR:
+		case PSR_AA32_MODE_SYS:
+			nr_reg = 15;
+			break;
+
+		/*
+		 * Otherwise, this is a privileged mode, and *all* the
+		 * registers must be narrowed to 32bit.
+		 */
+		default:
+			nr_reg = 31;
+			break;
+		}
+
+		for (i = 0; i < nr_reg; i++)
+			vcpu_set_reg(vcpu, i, (u32)vcpu_get_reg(vcpu, i));
+
+		*vcpu_pc(vcpu) = (u32)*vcpu_pc(vcpu);
+	}
+out:
+	return err;
+}
+
+#define vq_word(vq) (((vq) - SVE_VQ_MIN) / 64)
+#define vq_mask(vq) ((u64)1 << ((vq) - SVE_VQ_MIN) % 64)
+#define vq_present(vqs, vq) (!!((vqs)[vq_word(vq)] & vq_mask(vq)))
+
+static int get_sve_vls(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	unsigned int max_vq, vq;
+	u64 vqs[KVM_ARM64_SVE_VLS_WORDS];
+
+	if (!vcpu_has_sve(vcpu))
+		return -ENOENT;
+
+	if (WARN_ON(!sve_vl_valid(vcpu->arch.sve_max_vl)))
+		return -EINVAL;
+
+	memset(vqs, 0, sizeof(vqs));
+
+	max_vq = vcpu_sve_max_vq(vcpu);
+	for (vq = SVE_VQ_MIN; vq <= max_vq; ++vq)
+		if (sve_vq_available(vq))
+			vqs[vq_word(vq)] |= vq_mask(vq);
+
+	if (copy_to_user((void __user *)reg->addr, vqs, sizeof(vqs)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int set_sve_vls(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	unsigned int max_vq, vq;
+	u64 vqs[KVM_ARM64_SVE_VLS_WORDS];
+
+	if (!vcpu_has_sve(vcpu))
+		return -ENOENT;
+
+	if (kvm_arm_vcpu_sve_finalized(vcpu))
+		return -EPERM; /* too late! */
+
+	if (WARN_ON(vcpu->arch.sve_state))
+		return -EINVAL;
+
+	if (copy_from_user(vqs, (const void __user *)reg->addr, sizeof(vqs)))
+		return -EFAULT;
+
+	max_vq = 0;
+	for (vq = SVE_VQ_MIN; vq <= SVE_VQ_MAX; ++vq)
+		if (vq_present(vqs, vq))
+			max_vq = vq;
+
+	if (max_vq > sve_vq_from_vl(kvm_sve_max_vl))
+		return -EINVAL;
+
+	/*
+	 * Vector lengths supported by the host can't currently be
+	 * hidden from the guest individually: instead we can only set a
+	 * maximum via ZCR_EL2.LEN.  So, make sure the available vector
+	 * lengths match the set requested exactly up to the requested
+	 * maximum:
+	 */
+	for (vq = SVE_VQ_MIN; vq <= max_vq; ++vq)
+		if (vq_present(vqs, vq) != sve_vq_available(vq))
+			return -EINVAL;
+
+	/* Can't run with no vector lengths at all: */
+	if (max_vq < SVE_VQ_MIN)
+		return -EINVAL;
+
+	/* vcpu->arch.sve_state will be alloc'd by kvm_vcpu_finalize_sve() */
+	vcpu->arch.sve_max_vl = sve_vl_from_vq(max_vq);
+
+	return 0;
+}
+
+#define SVE_REG_SLICE_SHIFT	0
+#define SVE_REG_SLICE_BITS	5
+#define SVE_REG_ID_SHIFT	(SVE_REG_SLICE_SHIFT + SVE_REG_SLICE_BITS)
+#define SVE_REG_ID_BITS		5
+
+#define SVE_REG_SLICE_MASK					\
+	GENMASK(SVE_REG_SLICE_SHIFT + SVE_REG_SLICE_BITS - 1,	\
+		SVE_REG_SLICE_SHIFT)
+#define SVE_REG_ID_MASK							\
+	GENMASK(SVE_REG_ID_SHIFT + SVE_REG_ID_BITS - 1, SVE_REG_ID_SHIFT)
+
+#define SVE_NUM_SLICES (1 << SVE_REG_SLICE_BITS)
+
+#define KVM_SVE_ZREG_SIZE KVM_REG_SIZE(KVM_REG_ARM64_SVE_ZREG(0, 0))
+#define KVM_SVE_PREG_SIZE KVM_REG_SIZE(KVM_REG_ARM64_SVE_PREG(0, 0))
+
+/*
+ * Number of register slices required to cover each whole SVE register.
+ * NOTE: Only the first slice every exists, for now.
+ * If you are tempted to modify this, you must also rework sve_reg_to_region()
+ * to match:
+ */
+#define vcpu_sve_slices(vcpu) 1
+
+/* Bounds of a single SVE register slice within vcpu->arch.sve_state */
+struct sve_state_reg_region {
+	unsigned int koffset;	/* offset into sve_state in kernel memory */
+	unsigned int klen;	/* length in kernel memory */
+	unsigned int upad;	/* extra trailing padding in user memory */
+};
+
+/*
+ * Validate SVE register ID and get sanitised bounds for user/kernel SVE
+ * register copy
+ */
+static int sve_reg_to_region(struct sve_state_reg_region *region,
+			     struct kvm_vcpu *vcpu,
+			     const struct kvm_one_reg *reg)
+{
+	/* reg ID ranges for Z- registers */
+	const u64 zreg_id_min = KVM_REG_ARM64_SVE_ZREG(0, 0);
+	const u64 zreg_id_max = KVM_REG_ARM64_SVE_ZREG(SVE_NUM_ZREGS - 1,
+						       SVE_NUM_SLICES - 1);
+
+	/* reg ID ranges for P- registers and FFR (which are contiguous) */
+	const u64 preg_id_min = KVM_REG_ARM64_SVE_PREG(0, 0);
+	const u64 preg_id_max = KVM_REG_ARM64_SVE_FFR(SVE_NUM_SLICES - 1);
+
+	unsigned int vq;
+	unsigned int reg_num;
+
+	unsigned int reqoffset, reqlen; /* User-requested offset and length */
+	unsigned int maxlen; /* Maximum permitted length */
+
+	size_t sve_state_size;
+
+	const u64 last_preg_id = KVM_REG_ARM64_SVE_PREG(SVE_NUM_PREGS - 1,
+							SVE_NUM_SLICES - 1);
+
+	/* Verify that the P-regs and FFR really do have contiguous IDs: */
+	BUILD_BUG_ON(KVM_REG_ARM64_SVE_FFR(0) != last_preg_id + 1);
+
+	/* Verify that we match the UAPI header: */
+	BUILD_BUG_ON(SVE_NUM_SLICES != KVM_ARM64_SVE_MAX_SLICES);
+
+	reg_num = (reg->id & SVE_REG_ID_MASK) >> SVE_REG_ID_SHIFT;
+
+	if (reg->id >= zreg_id_min && reg->id <= zreg_id_max) {
+		if (!vcpu_has_sve(vcpu) || (reg->id & SVE_REG_SLICE_MASK) > 0)
+			return -ENOENT;
+
+		vq = vcpu_sve_max_vq(vcpu);
+
+		reqoffset = SVE_SIG_ZREG_OFFSET(vq, reg_num) -
+				SVE_SIG_REGS_OFFSET;
+		reqlen = KVM_SVE_ZREG_SIZE;
+		maxlen = SVE_SIG_ZREG_SIZE(vq);
+	} else if (reg->id >= preg_id_min && reg->id <= preg_id_max) {
+		if (!vcpu_has_sve(vcpu) || (reg->id & SVE_REG_SLICE_MASK) > 0)
+			return -ENOENT;
+
+		vq = vcpu_sve_max_vq(vcpu);
+
+		reqoffset = SVE_SIG_PREG_OFFSET(vq, reg_num) -
+				SVE_SIG_REGS_OFFSET;
+		reqlen = KVM_SVE_PREG_SIZE;
+		maxlen = SVE_SIG_PREG_SIZE(vq);
+	} else {
+		return -EINVAL;
+	}
+
+	sve_state_size = vcpu_sve_state_size(vcpu);
+	if (WARN_ON(!sve_state_size))
+		return -EINVAL;
+
+	region->koffset = array_index_nospec(reqoffset, sve_state_size);
+	region->klen = min(maxlen, reqlen);
+	region->upad = reqlen - region->klen;
+
+	return 0;
+}
+
+static int get_sve_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	int ret;
+	struct sve_state_reg_region region;
+	char __user *uptr = (char __user *)reg->addr;
+
+	/* Handle the KVM_REG_ARM64_SVE_VLS pseudo-reg as a special case: */
+	if (reg->id == KVM_REG_ARM64_SVE_VLS)
+		return get_sve_vls(vcpu, reg);
+
+	/* Try to interpret reg ID as an architectural SVE register... */
+	ret = sve_reg_to_region(&region, vcpu, reg);
+	if (ret)
+		return ret;
+
+	if (!kvm_arm_vcpu_sve_finalized(vcpu))
+		return -EPERM;
+
+	if (copy_to_user(uptr, vcpu->arch.sve_state + region.koffset,
+			 region.klen) ||
+	    clear_user(uptr + region.klen, region.upad))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int set_sve_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	int ret;
+	struct sve_state_reg_region region;
+	const char __user *uptr = (const char __user *)reg->addr;
+
+	/* Handle the KVM_REG_ARM64_SVE_VLS pseudo-reg as a special case: */
+	if (reg->id == KVM_REG_ARM64_SVE_VLS)
+		return set_sve_vls(vcpu, reg);
+
+	/* Try to interpret reg ID as an architectural SVE register... */
+	ret = sve_reg_to_region(&region, vcpu, reg);
+	if (ret)
+		return ret;
+
+	if (!kvm_arm_vcpu_sve_finalized(vcpu))
+		return -EPERM;
+
+	if (copy_from_user(vcpu->arch.sve_state + region.koffset, uptr,
+			   region.klen))
+		return -EFAULT;
+
+	return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+	return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+	return -EINVAL;
+}
+
+static int copy_core_reg_indices(const struct kvm_vcpu *vcpu,
+				 u64 __user *uindices)
+{
+	unsigned int i;
+	int n = 0;
+
+	for (i = 0; i < sizeof(struct kvm_regs) / sizeof(__u32); i++) {
+		u64 reg = KVM_REG_ARM64 | KVM_REG_ARM_CORE | i;
+		int size = core_reg_size_from_offset(vcpu, i);
+
+		if (size < 0)
+			continue;
+
+		switch (size) {
+		case sizeof(__u32):
+			reg |= KVM_REG_SIZE_U32;
+			break;
+
+		case sizeof(__u64):
+			reg |= KVM_REG_SIZE_U64;
+			break;
+
+		case sizeof(__uint128_t):
+			reg |= KVM_REG_SIZE_U128;
+			break;
+
+		default:
+			WARN_ON(1);
+			continue;
+		}
+
+		if (uindices) {
+			if (put_user(reg, uindices))
+				return -EFAULT;
+			uindices++;
+		}
+
+		n++;
+	}
+
+	return n;
+}
+
+static unsigned long num_core_regs(const struct kvm_vcpu *vcpu)
+{
+	return copy_core_reg_indices(vcpu, NULL);
+}
+
+static const u64 timer_reg_list[] = {
+	KVM_REG_ARM_TIMER_CTL,
+	KVM_REG_ARM_TIMER_CNT,
+	KVM_REG_ARM_TIMER_CVAL,
+	KVM_REG_ARM_PTIMER_CTL,
+	KVM_REG_ARM_PTIMER_CNT,
+	KVM_REG_ARM_PTIMER_CVAL,
+};
+
+#define NUM_TIMER_REGS ARRAY_SIZE(timer_reg_list)
+
+static bool is_timer_reg(u64 index)
+{
+	switch (index) {
+	case KVM_REG_ARM_TIMER_CTL:
+	case KVM_REG_ARM_TIMER_CNT:
+	case KVM_REG_ARM_TIMER_CVAL:
+	case KVM_REG_ARM_PTIMER_CTL:
+	case KVM_REG_ARM_PTIMER_CNT:
+	case KVM_REG_ARM_PTIMER_CVAL:
+		return true;
+	}
+	return false;
+}
+
+static int copy_timer_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+	for (int i = 0; i < NUM_TIMER_REGS; i++) {
+		if (put_user(timer_reg_list[i], uindices))
+			return -EFAULT;
+		uindices++;
+	}
+
+	return 0;
+}
+
+static int set_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	void __user *uaddr = (void __user *)(long)reg->addr;
+	u64 val;
+	int ret;
+
+	ret = copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id));
+	if (ret != 0)
+		return -EFAULT;
+
+	return kvm_arm_timer_set_reg(vcpu, reg->id, val);
+}
+
+static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	void __user *uaddr = (void __user *)(long)reg->addr;
+	u64 val;
+
+	val = kvm_arm_timer_get_reg(vcpu, reg->id);
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
+}
+
+static unsigned long num_sve_regs(const struct kvm_vcpu *vcpu)
+{
+	const unsigned int slices = vcpu_sve_slices(vcpu);
+
+	if (!vcpu_has_sve(vcpu))
+		return 0;
+
+	/* Policed by KVM_GET_REG_LIST: */
+	WARN_ON(!kvm_arm_vcpu_sve_finalized(vcpu));
+
+	return slices * (SVE_NUM_PREGS + SVE_NUM_ZREGS + 1 /* FFR */)
+		+ 1; /* KVM_REG_ARM64_SVE_VLS */
+}
+
+static int copy_sve_reg_indices(const struct kvm_vcpu *vcpu,
+				u64 __user *uindices)
+{
+	const unsigned int slices = vcpu_sve_slices(vcpu);
+	u64 reg;
+	unsigned int i, n;
+	int num_regs = 0;
+
+	if (!vcpu_has_sve(vcpu))
+		return 0;
+
+	/* Policed by KVM_GET_REG_LIST: */
+	WARN_ON(!kvm_arm_vcpu_sve_finalized(vcpu));
+
+	/*
+	 * Enumerate this first, so that userspace can save/restore in
+	 * the order reported by KVM_GET_REG_LIST:
+	 */
+	reg = KVM_REG_ARM64_SVE_VLS;
+	if (put_user(reg, uindices++))
+		return -EFAULT;
+	++num_regs;
+
+	for (i = 0; i < slices; i++) {
+		for (n = 0; n < SVE_NUM_ZREGS; n++) {
+			reg = KVM_REG_ARM64_SVE_ZREG(n, i);
+			if (put_user(reg, uindices++))
+				return -EFAULT;
+			num_regs++;
+		}
+
+		for (n = 0; n < SVE_NUM_PREGS; n++) {
+			reg = KVM_REG_ARM64_SVE_PREG(n, i);
+			if (put_user(reg, uindices++))
+				return -EFAULT;
+			num_regs++;
+		}
+
+		reg = KVM_REG_ARM64_SVE_FFR(i);
+		if (put_user(reg, uindices++))
+			return -EFAULT;
+		num_regs++;
+	}
+
+	return num_regs;
+}
+
+/**
+ * kvm_arm_num_regs - how many registers do we present via KVM_GET_ONE_REG
+ *
+ * This is for all registers.
+ */
+unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu)
+{
+	unsigned long res = 0;
+
+	res += num_core_regs(vcpu);
+	res += num_sve_regs(vcpu);
+	res += kvm_arm_num_sys_reg_descs(vcpu);
+	res += kvm_arm_get_fw_num_regs(vcpu);
+	res += NUM_TIMER_REGS;
+
+	return res;
+}
+
+/**
+ * kvm_arm_copy_reg_indices - get indices of all registers.
+ *
+ * We do core registers right here, then we append system regs.
+ */
+int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+	int ret;
+
+	ret = copy_core_reg_indices(vcpu, uindices);
+	if (ret < 0)
+		return ret;
+	uindices += ret;
+
+	ret = copy_sve_reg_indices(vcpu, uindices);
+	if (ret < 0)
+		return ret;
+	uindices += ret;
+
+	ret = kvm_arm_copy_fw_reg_indices(vcpu, uindices);
+	if (ret < 0)
+		return ret;
+	uindices += kvm_arm_get_fw_num_regs(vcpu);
+
+	ret = copy_timer_indices(vcpu, uindices);
+	if (ret < 0)
+		return ret;
+	uindices += NUM_TIMER_REGS;
+
+	return kvm_arm_copy_sys_reg_indices(vcpu, uindices);
+}
+
+int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	/* We currently use nothing arch-specific in upper 32 bits */
+	if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM64 >> 32)
+		return -EINVAL;
+
+	switch (reg->id & KVM_REG_ARM_COPROC_MASK) {
+	case KVM_REG_ARM_CORE:	return get_core_reg(vcpu, reg);
+	case KVM_REG_ARM_FW:
+	case KVM_REG_ARM_FW_FEAT_BMAP:
+		return kvm_arm_get_fw_reg(vcpu, reg);
+	case KVM_REG_ARM64_SVE:	return get_sve_reg(vcpu, reg);
+	}
+
+	if (is_timer_reg(reg->id))
+		return get_timer_reg(vcpu, reg);
+
+	return kvm_arm_sys_reg_get_reg(vcpu, reg);
+}
+
+int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	/* We currently use nothing arch-specific in upper 32 bits */
+	if ((reg->id & ~KVM_REG_SIZE_MASK) >> 32 != KVM_REG_ARM64 >> 32)
+		return -EINVAL;
+
+	switch (reg->id & KVM_REG_ARM_COPROC_MASK) {
+	case KVM_REG_ARM_CORE:	return set_core_reg(vcpu, reg);
+	case KVM_REG_ARM_FW:
+	case KVM_REG_ARM_FW_FEAT_BMAP:
+		return kvm_arm_set_fw_reg(vcpu, reg);
+	case KVM_REG_ARM64_SVE:	return set_sve_reg(vcpu, reg);
+	}
+
+	if (is_timer_reg(reg->id))
+		return set_timer_reg(vcpu, reg);
+
+	return kvm_arm_sys_reg_set_reg(vcpu, reg);
+}
+
+int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
+				  struct kvm_sregs *sregs)
+{
+	return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
+				  struct kvm_sregs *sregs)
+{
+	return -EINVAL;
+}
+
+int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
+			      struct kvm_vcpu_events *events)
+{
+	events->exception.serror_pending = !!(vcpu->arch.hcr_el2 & HCR_VSE);
+	events->exception.serror_has_esr = cpus_have_const_cap(ARM64_HAS_RAS_EXTN);
+
+	if (events->exception.serror_pending && events->exception.serror_has_esr)
+		events->exception.serror_esr = vcpu_get_vsesr(vcpu);
+
+	/*
+	 * We never return a pending ext_dabt here because we deliver it to
+	 * the virtual CPU directly when setting the event and it's no longer
+	 * 'pending' at this point.
+	 */
+
+	return 0;
+}
+
+int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
+			      struct kvm_vcpu_events *events)
+{
+	bool serror_pending = events->exception.serror_pending;
+	bool has_esr = events->exception.serror_has_esr;
+	bool ext_dabt_pending = events->exception.ext_dabt_pending;
+
+	if (serror_pending && has_esr) {
+		if (!cpus_have_const_cap(ARM64_HAS_RAS_EXTN))
+			return -EINVAL;
+
+		if (!((events->exception.serror_esr) & ~ESR_ELx_ISS_MASK))
+			kvm_set_sei_esr(vcpu, events->exception.serror_esr);
+		else
+			return -EINVAL;
+	} else if (serror_pending) {
+		kvm_inject_vabt(vcpu);
+	}
+
+	if (ext_dabt_pending)
+		kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
+
+	return 0;
+}
+
+u32 __attribute_const__ kvm_target_cpu(void)
+{
+	unsigned long implementor = read_cpuid_implementor();
+	unsigned long part_number = read_cpuid_part_number();
+
+	switch (implementor) {
+	case ARM_CPU_IMP_ARM:
+		switch (part_number) {
+		case ARM_CPU_PART_AEM_V8:
+			return KVM_ARM_TARGET_AEM_V8;
+		case ARM_CPU_PART_FOUNDATION:
+			return KVM_ARM_TARGET_FOUNDATION_V8;
+		case ARM_CPU_PART_CORTEX_A53:
+			return KVM_ARM_TARGET_CORTEX_A53;
+		case ARM_CPU_PART_CORTEX_A57:
+			return KVM_ARM_TARGET_CORTEX_A57;
+		}
+		break;
+	case ARM_CPU_IMP_APM:
+		switch (part_number) {
+		case APM_CPU_PART_XGENE:
+			return KVM_ARM_TARGET_XGENE_POTENZA;
+		}
+		break;
+	}
+
+	/* Return a default generic target */
+	return KVM_ARM_TARGET_GENERIC_V8;
+}
+
+int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+	return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+	return -EINVAL;
+}
+
+int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
+				  struct kvm_translation *tr)
+{
+	return -EINVAL;
+}
+
+/**
+ * kvm_arch_vcpu_ioctl_set_guest_debug - set up guest debugging
+ * @kvm:	pointer to the KVM struct
+ * @kvm_guest_debug: the ioctl data buffer
+ *
+ * This sets up and enables the VM for guest debugging. Userspace
+ * passes in a control flag to enable different debug types and
+ * potentially other architecture specific information in the rest of
+ * the structure.
+ */
+int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
+					struct kvm_guest_debug *dbg)
+{
+	int ret = 0;
+
+	trace_kvm_set_guest_debug(vcpu, dbg->control);
+
+	if (dbg->control & ~KVM_GUESTDBG_VALID_MASK) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (dbg->control & KVM_GUESTDBG_ENABLE) {
+		vcpu->guest_debug = dbg->control;
+
+		/* Hardware assisted Break and Watch points */
+		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW) {
+			vcpu->arch.external_debug_state = dbg->arch;
+		}
+
+	} else {
+		/* If not enabled clear all flags */
+		vcpu->guest_debug = 0;
+		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+	}
+
+out:
+	return ret;
+}
+
+int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr)
+{
+	int ret;
+
+	switch (attr->group) {
+	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		mutex_lock(&vcpu->kvm->arch.config_lock);
+		ret = kvm_arm_pmu_v3_set_attr(vcpu, attr);
+		mutex_unlock(&vcpu->kvm->arch.config_lock);
+		break;
+	case KVM_ARM_VCPU_TIMER_CTRL:
+		ret = kvm_arm_timer_set_attr(vcpu, attr);
+		break;
+	case KVM_ARM_VCPU_PVTIME_CTRL:
+		ret = kvm_arm_pvtime_set_attr(vcpu, attr);
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr)
+{
+	int ret;
+
+	switch (attr->group) {
+	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		ret = kvm_arm_pmu_v3_get_attr(vcpu, attr);
+		break;
+	case KVM_ARM_VCPU_TIMER_CTRL:
+		ret = kvm_arm_timer_get_attr(vcpu, attr);
+		break;
+	case KVM_ARM_VCPU_PVTIME_CTRL:
+		ret = kvm_arm_pvtime_get_attr(vcpu, attr);
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr)
+{
+	int ret;
+
+	switch (attr->group) {
+	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		ret = kvm_arm_pmu_v3_has_attr(vcpu, attr);
+		break;
+	case KVM_ARM_VCPU_TIMER_CTRL:
+		ret = kvm_arm_timer_has_attr(vcpu, attr);
+		break;
+	case KVM_ARM_VCPU_PVTIME_CTRL:
+		ret = kvm_arm_pvtime_has_attr(vcpu, attr);
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+int kvm_vm_ioctl_mte_copy_tags(struct kvm *kvm,
+			       struct kvm_arm_copy_mte_tags *copy_tags)
+{
+	gpa_t guest_ipa = copy_tags->guest_ipa;
+	size_t length = copy_tags->length;
+	void __user *tags = copy_tags->addr;
+	gpa_t gfn;
+	bool write = !(copy_tags->flags & KVM_ARM_TAGS_FROM_GUEST);
+	int ret = 0;
+
+	if (!kvm_has_mte(kvm))
+		return -EINVAL;
+
+	if (copy_tags->reserved[0] || copy_tags->reserved[1])
+		return -EINVAL;
+
+	if (copy_tags->flags & ~KVM_ARM_TAGS_FROM_GUEST)
+		return -EINVAL;
+
+	if (length & ~PAGE_MASK || guest_ipa & ~PAGE_MASK)
+		return -EINVAL;
+
+	/* Lengths above INT_MAX cannot be represented in the return value */
+	if (length > INT_MAX)
+		return -EINVAL;
+
+	gfn = gpa_to_gfn(guest_ipa);
+
+	mutex_lock(&kvm->slots_lock);
+
+	while (length > 0) {
+		kvm_pfn_t pfn = gfn_to_pfn_prot(kvm, gfn, write, NULL);
+		void *maddr;
+		unsigned long num_tags;
+		struct page *page;
+
+		if (is_error_noslot_pfn(pfn)) {
+			ret = -EFAULT;
+			goto out;
+		}
+
+		page = pfn_to_online_page(pfn);
+		if (!page) {
+			/* Reject ZONE_DEVICE memory */
+			ret = -EFAULT;
+			goto out;
+		}
+		maddr = page_address(page);
+
+		if (!write) {
+			if (page_mte_tagged(page))
+				num_tags = mte_copy_tags_to_user(tags, maddr,
+							MTE_GRANULES_PER_PAGE);
+			else
+				/* No tags in memory, so write zeros */
+				num_tags = MTE_GRANULES_PER_PAGE -
+					clear_user(tags, MTE_GRANULES_PER_PAGE);
+			kvm_release_pfn_clean(pfn);
+		} else {
+			/*
+			 * Only locking to serialise with a concurrent
+			 * set_pte_at() in the VMM but still overriding the
+			 * tags, hence ignoring the return value.
+			 */
+			try_page_mte_tagging(page);
+			num_tags = mte_copy_tags_from_user(maddr, tags,
+							MTE_GRANULES_PER_PAGE);
+
+			/* uaccess failed, don't leave stale tags */
+			if (num_tags != MTE_GRANULES_PER_PAGE)
+				mte_clear_page_tags(maddr);
+			set_page_mte_tagged(page);
+
+			kvm_release_pfn_dirty(pfn);
+		}
+
+		if (num_tags != MTE_GRANULES_PER_PAGE) {
+			ret = -EFAULT;
+			goto out;
+		}
+
+		gfn++;
+		tags += num_tags;
+		length -= PAGE_SIZE;
+	}
+
+out:
+	mutex_unlock(&kvm->slots_lock);
+	/* If some data has been copied report the number of bytes copied */
+	if (length != copy_tags->length)
+		return copy_tags->length - length;
+	return ret;
+}
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
new file mode 100644
index 000000000..617ae6dea
--- /dev/null
+++ b/arch/arm64/kvm/handle_exit.c
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/kvm/handle_exit.c:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+
+#include <asm/esr.h>
+#include <asm/exception.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_nested.h>
+#include <asm/debug-monitors.h>
+#include <asm/stacktrace/nvhe.h>
+#include <asm/traps.h>
+
+#include <kvm/arm_hypercalls.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace_handle_exit.h"
+
+typedef int (*exit_handle_fn)(struct kvm_vcpu *);
+
+static void kvm_handle_guest_serror(struct kvm_vcpu *vcpu, u64 esr)
+{
+	if (!arm64_is_ras_serror(esr) || arm64_is_fatal_ras_serror(NULL, esr))
+		kvm_inject_vabt(vcpu);
+}
+
+static int handle_hvc(struct kvm_vcpu *vcpu)
+{
+	trace_kvm_hvc_arm64(*vcpu_pc(vcpu), vcpu_get_reg(vcpu, 0),
+			    kvm_vcpu_hvc_get_imm(vcpu));
+	vcpu->stat.hvc_exit_stat++;
+
+	/* Forward hvc instructions to the virtual EL2 if the guest has EL2. */
+	if (vcpu_has_nv(vcpu)) {
+		if (vcpu_read_sys_reg(vcpu, HCR_EL2) & HCR_HCD)
+			kvm_inject_undefined(vcpu);
+		else
+			kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
+
+		return 1;
+	}
+
+	return kvm_smccc_call_handler(vcpu);
+}
+
+static int handle_smc(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * "If an SMC instruction executed at Non-secure EL1 is
+	 * trapped to EL2 because HCR_EL2.TSC is 1, the exception is a
+	 * Trap exception, not a Secure Monitor Call exception [...]"
+	 *
+	 * We need to advance the PC after the trap, as it would
+	 * otherwise return to the same address. Furthermore, pre-incrementing
+	 * the PC before potentially exiting to userspace maintains the same
+	 * abstraction for both SMCs and HVCs.
+	 */
+	kvm_incr_pc(vcpu);
+
+	/*
+	 * SMCs with a nonzero immediate are reserved according to DEN0028E 2.9
+	 * "SMC and HVC immediate value".
+	 */
+	if (kvm_vcpu_hvc_get_imm(vcpu)) {
+		vcpu_set_reg(vcpu, 0, ~0UL);
+		return 1;
+	}
+
+	/*
+	 * If imm is zero then it is likely an SMCCC call.
+	 *
+	 * Note that on ARMv8.3, even if EL3 is not implemented, SMC executed
+	 * at Non-secure EL1 is trapped to EL2 if HCR_EL2.TSC==1, rather than
+	 * being treated as UNDEFINED.
+	 */
+	return kvm_smccc_call_handler(vcpu);
+}
+
+/*
+ * Guest access to FP/ASIMD registers are routed to this handler only
+ * when the system doesn't support FP/ASIMD.
+ */
+static int handle_no_fpsimd(struct kvm_vcpu *vcpu)
+{
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+/**
+ * kvm_handle_wfx - handle a wait-for-interrupts or wait-for-event
+ *		    instruction executed by a guest
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * WFE[T]: Yield the CPU and come back to this vcpu when the scheduler
+ * decides to.
+ * WFI: Simply call kvm_vcpu_halt(), which will halt execution of
+ * world-switches and schedule other host processes until there is an
+ * incoming IRQ or FIQ to the VM.
+ * WFIT: Same as WFI, with a timed wakeup implemented as a background timer
+ *
+ * WF{I,E}T can immediately return if the deadline has already expired.
+ */
+static int kvm_handle_wfx(struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	if (esr & ESR_ELx_WFx_ISS_WFE) {
+		trace_kvm_wfx_arm64(*vcpu_pc(vcpu), true);
+		vcpu->stat.wfe_exit_stat++;
+	} else {
+		trace_kvm_wfx_arm64(*vcpu_pc(vcpu), false);
+		vcpu->stat.wfi_exit_stat++;
+	}
+
+	if (esr & ESR_ELx_WFx_ISS_WFxT) {
+		if (esr & ESR_ELx_WFx_ISS_RV) {
+			u64 val, now;
+
+			now = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_TIMER_CNT);
+			val = vcpu_get_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu));
+
+			if (now >= val)
+				goto out;
+		} else {
+			/* Treat WFxT as WFx if RN is invalid */
+			esr &= ~ESR_ELx_WFx_ISS_WFxT;
+		}
+	}
+
+	if (esr & ESR_ELx_WFx_ISS_WFE) {
+		kvm_vcpu_on_spin(vcpu, vcpu_mode_priv(vcpu));
+	} else {
+		if (esr & ESR_ELx_WFx_ISS_WFxT)
+			vcpu_set_flag(vcpu, IN_WFIT);
+
+		kvm_vcpu_wfi(vcpu);
+	}
+out:
+	kvm_incr_pc(vcpu);
+
+	return 1;
+}
+
+/**
+ * kvm_handle_guest_debug - handle a debug exception instruction
+ *
+ * @vcpu:	the vcpu pointer
+ *
+ * We route all debug exceptions through the same handler. If both the
+ * guest and host are using the same debug facilities it will be up to
+ * userspace to re-inject the correct exception for guest delivery.
+ *
+ * @return: 0 (while setting vcpu->run->exit_reason)
+ */
+static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
+{
+	struct kvm_run *run = vcpu->run;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	run->exit_reason = KVM_EXIT_DEBUG;
+	run->debug.arch.hsr = lower_32_bits(esr);
+	run->debug.arch.hsr_high = upper_32_bits(esr);
+	run->flags = KVM_DEBUG_ARCH_HSR_HIGH_VALID;
+
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_WATCHPT_LOW:
+		run->debug.arch.far = vcpu->arch.fault.far_el2;
+		break;
+	case ESR_ELx_EC_SOFTSTP_LOW:
+		vcpu_clear_flag(vcpu, DBG_SS_ACTIVE_PENDING);
+		break;
+	}
+
+	return 0;
+}
+
+static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+
+	kvm_pr_unimpl("Unknown exception class: esr: %#016llx -- %s\n",
+		      esr, esr_get_class_string(esr));
+
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+/*
+ * Guest access to SVE registers should be routed to this handler only
+ * when the system doesn't support SVE.
+ */
+static int handle_sve(struct kvm_vcpu *vcpu)
+{
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+/*
+ * Guest usage of a ptrauth instruction (which the guest EL1 did not turn into
+ * a NOP). If we get here, it is that we didn't fixup ptrauth on exit, and all
+ * that we can do is give the guest an UNDEF.
+ */
+static int kvm_handle_ptrauth(struct kvm_vcpu *vcpu)
+{
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+static int kvm_handle_eret(struct kvm_vcpu *vcpu)
+{
+	if (kvm_vcpu_get_esr(vcpu) & ESR_ELx_ERET_ISS_ERET)
+		return kvm_handle_ptrauth(vcpu);
+
+	/*
+	 * If we got here, two possibilities:
+	 *
+	 * - the guest is in EL2, and we need to fully emulate ERET
+	 *
+	 * - the guest is in EL1, and we need to reinject the
+         *   exception into the L1 hypervisor.
+	 *
+	 * If KVM ever traps ERET for its own use, we'll have to
+	 * revisit this.
+	 */
+	if (is_hyp_ctxt(vcpu))
+		kvm_emulate_nested_eret(vcpu);
+	else
+		kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
+
+	return 1;
+}
+
+static int handle_svc(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * So far, SVC traps only for NV via HFGITR_EL2. A SVC from a
+	 * 32bit guest would be caught by vpcu_mode_is_bad_32bit(), so
+	 * we should only have to deal with a 64 bit exception.
+	 */
+	kvm_inject_nested_sync(vcpu, kvm_vcpu_get_esr(vcpu));
+	return 1;
+}
+
+static exit_handle_fn arm_exit_handlers[] = {
+	[0 ... ESR_ELx_EC_MAX]	= kvm_handle_unknown_ec,
+	[ESR_ELx_EC_WFx]	= kvm_handle_wfx,
+	[ESR_ELx_EC_CP15_32]	= kvm_handle_cp15_32,
+	[ESR_ELx_EC_CP15_64]	= kvm_handle_cp15_64,
+	[ESR_ELx_EC_CP14_MR]	= kvm_handle_cp14_32,
+	[ESR_ELx_EC_CP14_LS]	= kvm_handle_cp14_load_store,
+	[ESR_ELx_EC_CP10_ID]	= kvm_handle_cp10_id,
+	[ESR_ELx_EC_CP14_64]	= kvm_handle_cp14_64,
+	[ESR_ELx_EC_HVC32]	= handle_hvc,
+	[ESR_ELx_EC_SMC32]	= handle_smc,
+	[ESR_ELx_EC_HVC64]	= handle_hvc,
+	[ESR_ELx_EC_SMC64]	= handle_smc,
+	[ESR_ELx_EC_SVC64]	= handle_svc,
+	[ESR_ELx_EC_SYS64]	= kvm_handle_sys_reg,
+	[ESR_ELx_EC_SVE]	= handle_sve,
+	[ESR_ELx_EC_ERET]	= kvm_handle_eret,
+	[ESR_ELx_EC_IABT_LOW]	= kvm_handle_guest_abort,
+	[ESR_ELx_EC_DABT_LOW]	= kvm_handle_guest_abort,
+	[ESR_ELx_EC_SOFTSTP_LOW]= kvm_handle_guest_debug,
+	[ESR_ELx_EC_WATCHPT_LOW]= kvm_handle_guest_debug,
+	[ESR_ELx_EC_BREAKPT_LOW]= kvm_handle_guest_debug,
+	[ESR_ELx_EC_BKPT32]	= kvm_handle_guest_debug,
+	[ESR_ELx_EC_BRK64]	= kvm_handle_guest_debug,
+	[ESR_ELx_EC_FP_ASIMD]	= handle_no_fpsimd,
+	[ESR_ELx_EC_PAC]	= kvm_handle_ptrauth,
+};
+
+static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	u8 esr_ec = ESR_ELx_EC(esr);
+
+	return arm_exit_handlers[esr_ec];
+}
+
+/*
+ * We may be single-stepping an emulated instruction. If the emulation
+ * has been completed in the kernel, we can return to userspace with a
+ * KVM_EXIT_DEBUG, otherwise userspace needs to complete its
+ * emulation first.
+ */
+static int handle_trap_exceptions(struct kvm_vcpu *vcpu)
+{
+	int handled;
+
+	/*
+	 * See ARM ARM B1.14.1: "Hyp traps on instructions
+	 * that fail their condition code check"
+	 */
+	if (!kvm_condition_valid(vcpu)) {
+		kvm_incr_pc(vcpu);
+		handled = 1;
+	} else {
+		exit_handle_fn exit_handler;
+
+		exit_handler = kvm_get_exit_handler(vcpu);
+		handled = exit_handler(vcpu);
+	}
+
+	return handled;
+}
+
+/*
+ * Return > 0 to return to guest, < 0 on error, 0 (and set exit_reason) on
+ * proper exit to userspace.
+ */
+int handle_exit(struct kvm_vcpu *vcpu, int exception_index)
+{
+	struct kvm_run *run = vcpu->run;
+
+	if (ARM_SERROR_PENDING(exception_index)) {
+		/*
+		 * The SError is handled by handle_exit_early(). If the guest
+		 * survives it will re-execute the original instruction.
+		 */
+		return 1;
+	}
+
+	exception_index = ARM_EXCEPTION_CODE(exception_index);
+
+	switch (exception_index) {
+	case ARM_EXCEPTION_IRQ:
+		return 1;
+	case ARM_EXCEPTION_EL1_SERROR:
+		return 1;
+	case ARM_EXCEPTION_TRAP:
+		return handle_trap_exceptions(vcpu);
+	case ARM_EXCEPTION_HYP_GONE:
+		/*
+		 * EL2 has been reset to the hyp-stub. This happens when a guest
+		 * is pre-emptied by kvm_reboot()'s shutdown call.
+		 */
+		run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+		return 0;
+	case ARM_EXCEPTION_IL:
+		/*
+		 * We attempted an illegal exception return.  Guest state must
+		 * have been corrupted somehow.  Give up.
+		 */
+		run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+		return -EINVAL;
+	default:
+		kvm_pr_unimpl("Unsupported exception type: %d",
+			      exception_index);
+		run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		return 0;
+	}
+}
+
+/* For exit types that need handling before we can be preempted */
+void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index)
+{
+	if (ARM_SERROR_PENDING(exception_index)) {
+		if (this_cpu_has_cap(ARM64_HAS_RAS_EXTN)) {
+			u64 disr = kvm_vcpu_get_disr(vcpu);
+
+			kvm_handle_guest_serror(vcpu, disr_to_esr(disr));
+		} else {
+			kvm_inject_vabt(vcpu);
+		}
+
+		return;
+	}
+
+	exception_index = ARM_EXCEPTION_CODE(exception_index);
+
+	if (exception_index == ARM_EXCEPTION_EL1_SERROR)
+		kvm_handle_guest_serror(vcpu, kvm_vcpu_get_esr(vcpu));
+}
+
+void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
+					      u64 elr_virt, u64 elr_phys,
+					      u64 par, uintptr_t vcpu,
+					      u64 far, u64 hpfar) {
+	u64 elr_in_kimg = __phys_to_kimg(elr_phys);
+	u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr_virt;
+	u64 mode = spsr & PSR_MODE_MASK;
+	u64 panic_addr = elr_virt + hyp_offset;
+
+	if (mode != PSR_MODE_EL2t && mode != PSR_MODE_EL2h) {
+		kvm_err("Invalid host exception to nVHE hyp!\n");
+	} else if (ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 &&
+		   (esr & ESR_ELx_BRK64_ISS_COMMENT_MASK) == BUG_BRK_IMM) {
+		const char *file = NULL;
+		unsigned int line = 0;
+
+		/* All hyp bugs, including warnings, are treated as fatal. */
+		if (!is_protected_kvm_enabled() ||
+		    IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) {
+			struct bug_entry *bug = find_bug(elr_in_kimg);
+
+			if (bug)
+				bug_get_file_line(bug, &file, &line);
+		}
+
+		if (file)
+			kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line);
+		else
+			kvm_err("nVHE hyp BUG at: [<%016llx>] %pB!\n", panic_addr,
+					(void *)(panic_addr + kaslr_offset()));
+	} else {
+		kvm_err("nVHE hyp panic at: [<%016llx>] %pB!\n", panic_addr,
+				(void *)(panic_addr + kaslr_offset()));
+	}
+
+	/* Dump the nVHE hypervisor backtrace */
+	kvm_nvhe_dump_backtrace(hyp_offset);
+
+	/*
+	 * Hyp has panicked and we're going to handle that by panicking the
+	 * kernel. The kernel offset will be revealed in the panic so we're
+	 * also safe to reveal the hyp offset as a debugging aid for translating
+	 * hyp VAs to vmlinux addresses.
+	 */
+	kvm_err("Hyp Offset: 0x%llx\n", hyp_offset);
+
+	panic("HYP panic:\nPS:%08llx PC:%016llx ESR:%016llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%016lx\n",
+	      spsr, elr_virt, esr, far, hpfar, par, vcpu);
+}
diff --git a/arch/arm64/kvm/hyp/Makefile b/arch/arm64/kvm/hyp/Makefile
new file mode 100644
index 000000000..a38dea618
--- /dev/null
+++ b/arch/arm64/kvm/hyp/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Kernel-based Virtual Machine module, HYP part
+#
+
+incdir := $(srctree)/$(src)/include
+subdir-asflags-y := -I$(incdir)
+subdir-ccflags-y := -I$(incdir)
+
+obj-$(CONFIG_KVM) += vhe/ nvhe/ pgtable.o
diff --git a/arch/arm64/kvm/hyp/aarch32.c b/arch/arm64/kvm/hyp/aarch32.c
new file mode 100644
index 000000000..f98cbe262
--- /dev/null
+++ b/arch/arm64/kvm/hyp/aarch32.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hyp portion of the (not much of an) Emulation layer for 32bit guests.
+ *
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * based on arch/arm/kvm/emulate.c
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+
+/*
+ * stolen from arch/arm/kernel/opcodes.c
+ *
+ * condition code lookup table
+ * index into the table is test code: EQ, NE, ... LT, GT, AL, NV
+ *
+ * bit position in short is condition code: NZCV
+ */
+static const unsigned short cc_map[16] = {
+	0xF0F0,			/* EQ == Z set            */
+	0x0F0F,			/* NE                     */
+	0xCCCC,			/* CS == C set            */
+	0x3333,			/* CC                     */
+	0xFF00,			/* MI == N set            */
+	0x00FF,			/* PL                     */
+	0xAAAA,			/* VS == V set            */
+	0x5555,			/* VC                     */
+	0x0C0C,			/* HI == C set && Z clear */
+	0xF3F3,			/* LS == C clear || Z set */
+	0xAA55,			/* GE == (N==V)           */
+	0x55AA,			/* LT == (N!=V)           */
+	0x0A05,			/* GT == (!Z && (N==V))   */
+	0xF5FA,			/* LE == (Z || (N!=V))    */
+	0xFFFF,			/* AL always              */
+	0			/* NV                     */
+};
+
+/*
+ * Check if a trapped instruction should have been executed or not.
+ */
+bool kvm_condition_valid32(const struct kvm_vcpu *vcpu)
+{
+	unsigned long cpsr;
+	u32 cpsr_cond;
+	int cond;
+
+	/* Top two bits non-zero?  Unconditional. */
+	if (kvm_vcpu_get_esr(vcpu) >> 30)
+		return true;
+
+	/* Is condition field valid? */
+	cond = kvm_vcpu_get_condition(vcpu);
+	if (cond == 0xE)
+		return true;
+
+	cpsr = *vcpu_cpsr(vcpu);
+
+	if (cond < 0) {
+		/* This can happen in Thumb mode: examine IT state. */
+		unsigned long it;
+
+		it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3);
+
+		/* it == 0 => unconditional. */
+		if (it == 0)
+			return true;
+
+		/* The cond for this insn works out as the top 4 bits. */
+		cond = (it >> 4);
+	}
+
+	cpsr_cond = cpsr >> 28;
+
+	if (!((cc_map[cond] >> cpsr_cond) & 1))
+		return false;
+
+	return true;
+}
+
+/**
+ * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block
+ * @vcpu:	The VCPU pointer
+ *
+ * When exceptions occur while instructions are executed in Thumb IF-THEN
+ * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have
+ * to do this little bit of work manually. The fields map like this:
+ *
+ * IT[7:0] -> CPSR[26:25],CPSR[15:10]
+ */
+static void kvm_adjust_itstate(struct kvm_vcpu *vcpu)
+{
+	unsigned long itbits, cond;
+	unsigned long cpsr = *vcpu_cpsr(vcpu);
+	bool is_arm = !(cpsr & PSR_AA32_T_BIT);
+
+	if (is_arm || !(cpsr & PSR_AA32_IT_MASK))
+		return;
+
+	cond = (cpsr & 0xe000) >> 13;
+	itbits = (cpsr & 0x1c00) >> (10 - 2);
+	itbits |= (cpsr & (0x3 << 25)) >> 25;
+
+	/* Perform ITAdvance (see page A2-52 in ARM DDI 0406C) */
+	if ((itbits & 0x7) == 0)
+		itbits = cond = 0;
+	else
+		itbits = (itbits << 1) & 0x1f;
+
+	cpsr &= ~PSR_AA32_IT_MASK;
+	cpsr |= cond << 13;
+	cpsr |= (itbits & 0x1c) << (10 - 2);
+	cpsr |= (itbits & 0x3) << 25;
+	*vcpu_cpsr(vcpu) = cpsr;
+}
+
+/**
+ * kvm_skip_instr - skip a trapped instruction and proceed to the next
+ * @vcpu: The vcpu pointer
+ */
+void kvm_skip_instr32(struct kvm_vcpu *vcpu)
+{
+	u32 pc = *vcpu_pc(vcpu);
+	bool is_thumb;
+
+	is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_AA32_T_BIT);
+	if (is_thumb && !kvm_vcpu_trap_il_is32bit(vcpu))
+		pc += 2;
+	else
+		pc += 4;
+
+	*vcpu_pc(vcpu) = pc;
+
+	kvm_adjust_itstate(vcpu);
+}
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
new file mode 100644
index 000000000..f3aa7738b
--- /dev/null
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/alternative.h>
+#include <asm/assembler.h>
+#include <asm/fpsimdmacros.h>
+#include <asm/kvm.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_mte.h>
+#include <asm/kvm_ptrauth.h>
+
+	.text
+
+/*
+ * u64 __guest_enter(struct kvm_vcpu *vcpu);
+ */
+SYM_FUNC_START(__guest_enter)
+	// x0: vcpu
+	// x1-x17: clobbered by macros
+	// x29: guest context
+
+	adr_this_cpu x1, kvm_hyp_ctxt, x2
+
+	// Store the hyp regs
+	save_callee_saved_regs x1
+
+	// Save hyp's sp_el0
+	save_sp_el0	x1, x2
+
+	// Now the hyp state is stored if we have a pending RAS SError it must
+	// affect the host or hyp. If any asynchronous exception is pending we
+	// defer the guest entry. The DSB isn't necessary before v8.2 as any
+	// SError would be fatal.
+alternative_if ARM64_HAS_RAS_EXTN
+	dsb	nshst
+	isb
+alternative_else_nop_endif
+	mrs	x1, isr_el1
+	cbz	x1,  1f
+	mov	x0, #ARM_EXCEPTION_IRQ
+	ret
+
+1:
+	set_loaded_vcpu x0, x1, x2
+
+	add	x29, x0, #VCPU_CONTEXT
+
+	// mte_switch_to_guest(g_ctxt, h_ctxt, tmp1)
+	mte_switch_to_guest x29, x1, x2
+
+	// Macro ptrauth_switch_to_guest format:
+	// 	ptrauth_switch_to_guest(guest cxt, tmp1, tmp2, tmp3)
+	// The below macro to restore guest keys is not implemented in C code
+	// as it may cause Pointer Authentication key signing mismatch errors
+	// when this feature is enabled for kernel code.
+	ptrauth_switch_to_guest x29, x0, x1, x2
+
+	// Restore the guest's sp_el0
+	restore_sp_el0 x29, x0
+
+	// Restore guest regs x0-x17
+	ldp	x0, x1,   [x29, #CPU_XREG_OFFSET(0)]
+	ldp	x2, x3,   [x29, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x29, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x29, #CPU_XREG_OFFSET(6)]
+	ldp	x8, x9,   [x29, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x29, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x29, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x29, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x29, #CPU_XREG_OFFSET(16)]
+
+	// Restore guest regs x18-x29, lr
+	restore_callee_saved_regs x29
+
+	// Do not touch any register after this!
+	eret
+	sb
+
+SYM_INNER_LABEL(__guest_exit_panic, SYM_L_GLOBAL)
+	// x2-x29,lr: vcpu regs
+	// vcpu x0-x1 on the stack
+
+	// If the hyp context is loaded, go straight to hyp_panic
+	get_loaded_vcpu x0, x1
+	cbnz	x0, 1f
+	b	hyp_panic
+
+1:
+	// The hyp context is saved so make sure it is restored to allow
+	// hyp_panic to run at hyp and, subsequently, panic to run in the host.
+	// This makes use of __guest_exit to avoid duplication but sets the
+	// return address to tail call into hyp_panic. As a side effect, the
+	// current state is saved to the guest context but it will only be
+	// accurate if the guest had been completely restored.
+	adr_this_cpu x0, kvm_hyp_ctxt, x1
+	adr_l	x1, hyp_panic
+	str	x1, [x0, #CPU_XREG_OFFSET(30)]
+
+	get_vcpu_ptr	x1, x0
+
+SYM_INNER_LABEL(__guest_exit, SYM_L_GLOBAL)
+	// x0: return code
+	// x1: vcpu
+	// x2-x29,lr: vcpu regs
+	// vcpu x0-x1 on the stack
+
+	add	x1, x1, #VCPU_CONTEXT
+
+	ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
+
+	// Store the guest regs x2 and x3
+	stp	x2, x3,   [x1, #CPU_XREG_OFFSET(2)]
+
+	// Retrieve the guest regs x0-x1 from the stack
+	ldp	x2, x3, [sp], #16	// x0, x1
+
+	// Store the guest regs x0-x1 and x4-x17
+	stp	x2, x3,   [x1, #CPU_XREG_OFFSET(0)]
+	stp	x4, x5,   [x1, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x1, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x1, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x1, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x1, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x1, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x1, #CPU_XREG_OFFSET(16)]
+
+	// Store the guest regs x18-x29, lr
+	save_callee_saved_regs x1
+
+	// Store the guest's sp_el0
+	save_sp_el0	x1, x2
+
+	adr_this_cpu x2, kvm_hyp_ctxt, x3
+
+	// Macro ptrauth_switch_to_hyp format:
+	// 	ptrauth_switch_to_hyp(guest cxt, host cxt, tmp1, tmp2, tmp3)
+	// The below macro to save/restore keys is not implemented in C code
+	// as it may cause Pointer Authentication key signing mismatch errors
+	// when this feature is enabled for kernel code.
+	ptrauth_switch_to_hyp x1, x2, x3, x4, x5
+
+	// mte_switch_to_hyp(g_ctxt, h_ctxt, reg1)
+	mte_switch_to_hyp x1, x2, x3
+
+	// Restore hyp's sp_el0
+	restore_sp_el0 x2, x3
+
+	// Now restore the hyp regs
+	restore_callee_saved_regs x2
+
+	set_loaded_vcpu xzr, x2, x3
+
+alternative_if ARM64_HAS_RAS_EXTN
+	// If we have the RAS extensions we can consume a pending error
+	// without an unmask-SError and isb. The ESB-instruction consumed any
+	// pending guest error when we took the exception from the guest.
+	mrs_s	x2, SYS_DISR_EL1
+	str	x2, [x1, #(VCPU_FAULT_DISR - VCPU_CONTEXT)]
+	cbz	x2, 1f
+	msr_s	SYS_DISR_EL1, xzr
+	orr	x0, x0, #(1<<ARM_EXIT_WITH_SERROR_BIT)
+1:	ret
+alternative_else
+	dsb	sy		// Synchronize against in-flight ld/st
+	isb			// Prevent an early read of side-effect free ISR
+	mrs	x2, isr_el1
+	tbnz	x2, #ISR_EL1_A_SHIFT, 2f
+	ret
+	nop
+2:
+alternative_endif
+	// We know we have a pending asynchronous abort, now is the
+	// time to flush it out. From your VAXorcist book, page 666:
+	// "Threaten me not, oh Evil one!  For I speak with
+	// the power of DEC, and I command thee to show thyself!"
+	mrs	x2, elr_el2
+	mrs	x3, esr_el2
+	mrs	x4, spsr_el2
+	mov	x5, x0
+
+	msr	daifclr, #4	// Unmask aborts
+
+	// This is our single instruction exception window. A pending
+	// SError is guaranteed to occur at the earliest when we unmask
+	// it, and at the latest just after the ISB.
+abort_guest_exit_start:
+
+	isb
+
+abort_guest_exit_end:
+
+	msr	daifset, #4	// Mask aborts
+	ret
+
+	_kvm_extable	abort_guest_exit_start, 9997f
+	_kvm_extable	abort_guest_exit_end, 9997f
+9997:
+	msr	daifset, #4	// Mask aborts
+	mov	x0, #(1 << ARM_EXIT_WITH_SERROR_BIT)
+
+	// restore the EL1 exception context so that we can report some
+	// information. Merge the exception code with the SError pending bit.
+	msr	elr_el2, x2
+	msr	esr_el2, x3
+	msr	spsr_el2, x4
+	orr	x0, x0, x5
+1:	ret
+SYM_FUNC_END(__guest_enter)
diff --git a/arch/arm64/kvm/hyp/exception.c b/arch/arm64/kvm/hyp/exception.c
new file mode 100644
index 000000000..424a5107c
--- /dev/null
+++ b/arch/arm64/kvm/hyp/exception.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Fault injection for both 32 and 64bit guests.
+ *
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Based on arch/arm/kvm/emulate.c
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <hyp/adjust_pc.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_nested.h>
+
+#if !defined (__KVM_NVHE_HYPERVISOR__) && !defined (__KVM_VHE_HYPERVISOR__)
+#error Hypervisor code only!
+#endif
+
+static inline u64 __vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
+{
+	u64 val;
+
+	if (unlikely(vcpu_has_nv(vcpu)))
+		return vcpu_read_sys_reg(vcpu, reg);
+	else if (__vcpu_read_sys_reg_from_cpu(reg, &val))
+		return val;
+
+	return __vcpu_sys_reg(vcpu, reg);
+}
+
+static inline void __vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
+{
+	if (unlikely(vcpu_has_nv(vcpu)))
+		vcpu_write_sys_reg(vcpu, val, reg);
+	else if (!__vcpu_write_sys_reg_to_cpu(val, reg))
+		__vcpu_sys_reg(vcpu, reg) = val;
+}
+
+static void __vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long target_mode,
+			      u64 val)
+{
+	if (unlikely(vcpu_has_nv(vcpu))) {
+		if (target_mode == PSR_MODE_EL1h)
+			vcpu_write_sys_reg(vcpu, val, SPSR_EL1);
+		else
+			vcpu_write_sys_reg(vcpu, val, SPSR_EL2);
+	} else if (has_vhe()) {
+		write_sysreg_el1(val, SYS_SPSR);
+	} else {
+		__vcpu_sys_reg(vcpu, SPSR_EL1) = val;
+	}
+}
+
+static void __vcpu_write_spsr_abt(struct kvm_vcpu *vcpu, u64 val)
+{
+	if (has_vhe())
+		write_sysreg(val, spsr_abt);
+	else
+		vcpu->arch.ctxt.spsr_abt = val;
+}
+
+static void __vcpu_write_spsr_und(struct kvm_vcpu *vcpu, u64 val)
+{
+	if (has_vhe())
+		write_sysreg(val, spsr_und);
+	else
+		vcpu->arch.ctxt.spsr_und = val;
+}
+
+/*
+ * This performs the exception entry at a given EL (@target_mode), stashing PC
+ * and PSTATE into ELR and SPSR respectively, and compute the new PC/PSTATE.
+ * The EL passed to this function *must* be a non-secure, privileged mode with
+ * bit 0 being set (PSTATE.SP == 1).
+ *
+ * When an exception is taken, most PSTATE fields are left unchanged in the
+ * handler. However, some are explicitly overridden (e.g. M[4:0]). Luckily all
+ * of the inherited bits have the same position in the AArch64/AArch32 SPSR_ELx
+ * layouts, so we don't need to shuffle these for exceptions from AArch32 EL0.
+ *
+ * For the SPSR_ELx layout for AArch64, see ARM DDI 0487E.a page C5-429.
+ * For the SPSR_ELx layout for AArch32, see ARM DDI 0487E.a page C5-426.
+ *
+ * Here we manipulate the fields in order of the AArch64 SPSR_ELx layout, from
+ * MSB to LSB.
+ */
+static void enter_exception64(struct kvm_vcpu *vcpu, unsigned long target_mode,
+			      enum exception_type type)
+{
+	unsigned long sctlr, vbar, old, new, mode;
+	u64 exc_offset;
+
+	mode = *vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT);
+
+	if      (mode == target_mode)
+		exc_offset = CURRENT_EL_SP_ELx_VECTOR;
+	else if ((mode | PSR_MODE_THREAD_BIT) == target_mode)
+		exc_offset = CURRENT_EL_SP_EL0_VECTOR;
+	else if (!(mode & PSR_MODE32_BIT))
+		exc_offset = LOWER_EL_AArch64_VECTOR;
+	else
+		exc_offset = LOWER_EL_AArch32_VECTOR;
+
+	switch (target_mode) {
+	case PSR_MODE_EL1h:
+		vbar = __vcpu_read_sys_reg(vcpu, VBAR_EL1);
+		sctlr = __vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+		__vcpu_write_sys_reg(vcpu, *vcpu_pc(vcpu), ELR_EL1);
+		break;
+	case PSR_MODE_EL2h:
+		vbar = __vcpu_read_sys_reg(vcpu, VBAR_EL2);
+		sctlr = __vcpu_read_sys_reg(vcpu, SCTLR_EL2);
+		__vcpu_write_sys_reg(vcpu, *vcpu_pc(vcpu), ELR_EL2);
+		break;
+	default:
+		/* Don't do that */
+		BUG();
+	}
+
+	*vcpu_pc(vcpu) = vbar + exc_offset + type;
+
+	old = *vcpu_cpsr(vcpu);
+	new = 0;
+
+	new |= (old & PSR_N_BIT);
+	new |= (old & PSR_Z_BIT);
+	new |= (old & PSR_C_BIT);
+	new |= (old & PSR_V_BIT);
+
+	if (kvm_has_mte(kern_hyp_va(vcpu->kvm)))
+		new |= PSR_TCO_BIT;
+
+	new |= (old & PSR_DIT_BIT);
+
+	// PSTATE.UAO is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D5-2579.
+
+	// PSTATE.PAN is unchanged unless SCTLR_ELx.SPAN == 0b0
+	// SCTLR_ELx.SPAN is RES1 when ARMv8.1-PAN is not implemented
+	// See ARM DDI 0487E.a, page D5-2578.
+	new |= (old & PSR_PAN_BIT);
+	if (!(sctlr & SCTLR_EL1_SPAN))
+		new |= PSR_PAN_BIT;
+
+	// PSTATE.SS is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D2-2452.
+
+	// PSTATE.IL is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D1-2306.
+
+	// PSTATE.SSBS is set to SCTLR_ELx.DSSBS upon any exception to AArch64
+	// See ARM DDI 0487E.a, page D13-3258
+	if (sctlr & SCTLR_ELx_DSSBS)
+		new |= PSR_SSBS_BIT;
+
+	// PSTATE.BTYPE is set to zero upon any exception to AArch64
+	// See ARM DDI 0487E.a, pages D1-2293 to D1-2294.
+
+	new |= PSR_D_BIT;
+	new |= PSR_A_BIT;
+	new |= PSR_I_BIT;
+	new |= PSR_F_BIT;
+
+	new |= target_mode;
+
+	*vcpu_cpsr(vcpu) = new;
+	__vcpu_write_spsr(vcpu, target_mode, old);
+}
+
+/*
+ * When an exception is taken, most CPSR fields are left unchanged in the
+ * handler. However, some are explicitly overridden (e.g. M[4:0]).
+ *
+ * The SPSR/SPSR_ELx layouts differ, and the below is intended to work with
+ * either format. Note: SPSR.J bit doesn't exist in SPSR_ELx, but this bit was
+ * obsoleted by the ARMv7 virtualization extensions and is RES0.
+ *
+ * For the SPSR layout seen from AArch32, see:
+ * - ARM DDI 0406C.d, page B1-1148
+ * - ARM DDI 0487E.a, page G8-6264
+ *
+ * For the SPSR_ELx layout for AArch32 seen from AArch64, see:
+ * - ARM DDI 0487E.a, page C5-426
+ *
+ * Here we manipulate the fields in order of the AArch32 SPSR_ELx layout, from
+ * MSB to LSB.
+ */
+static unsigned long get_except32_cpsr(struct kvm_vcpu *vcpu, u32 mode)
+{
+	u32 sctlr = __vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+	unsigned long old, new;
+
+	old = *vcpu_cpsr(vcpu);
+	new = 0;
+
+	new |= (old & PSR_AA32_N_BIT);
+	new |= (old & PSR_AA32_Z_BIT);
+	new |= (old & PSR_AA32_C_BIT);
+	new |= (old & PSR_AA32_V_BIT);
+	new |= (old & PSR_AA32_Q_BIT);
+
+	// CPSR.IT[7:0] are set to zero upon any exception
+	// See ARM DDI 0487E.a, section G1.12.3
+	// See ARM DDI 0406C.d, section B1.8.3
+
+	new |= (old & PSR_AA32_DIT_BIT);
+
+	// CPSR.SSBS is set to SCTLR.DSSBS upon any exception
+	// See ARM DDI 0487E.a, page G8-6244
+	if (sctlr & BIT(31))
+		new |= PSR_AA32_SSBS_BIT;
+
+	// CPSR.PAN is unchanged unless SCTLR.SPAN == 0b0
+	// SCTLR.SPAN is RES1 when ARMv8.1-PAN is not implemented
+	// See ARM DDI 0487E.a, page G8-6246
+	new |= (old & PSR_AA32_PAN_BIT);
+	if (!(sctlr & BIT(23)))
+		new |= PSR_AA32_PAN_BIT;
+
+	// SS does not exist in AArch32, so ignore
+
+	// CPSR.IL is set to zero upon any exception
+	// See ARM DDI 0487E.a, page G1-5527
+
+	new |= (old & PSR_AA32_GE_MASK);
+
+	// CPSR.IT[7:0] are set to zero upon any exception
+	// See prior comment above
+
+	// CPSR.E is set to SCTLR.EE upon any exception
+	// See ARM DDI 0487E.a, page G8-6245
+	// See ARM DDI 0406C.d, page B4-1701
+	if (sctlr & BIT(25))
+		new |= PSR_AA32_E_BIT;
+
+	// CPSR.A is unchanged upon an exception to Undefined, Supervisor
+	// CPSR.A is set upon an exception to other modes
+	// See ARM DDI 0487E.a, pages G1-5515 to G1-5516
+	// See ARM DDI 0406C.d, page B1-1182
+	new |= (old & PSR_AA32_A_BIT);
+	if (mode != PSR_AA32_MODE_UND && mode != PSR_AA32_MODE_SVC)
+		new |= PSR_AA32_A_BIT;
+
+	// CPSR.I is set upon any exception
+	// See ARM DDI 0487E.a, pages G1-5515 to G1-5516
+	// See ARM DDI 0406C.d, page B1-1182
+	new |= PSR_AA32_I_BIT;
+
+	// CPSR.F is set upon an exception to FIQ
+	// CPSR.F is unchanged upon an exception to other modes
+	// See ARM DDI 0487E.a, pages G1-5515 to G1-5516
+	// See ARM DDI 0406C.d, page B1-1182
+	new |= (old & PSR_AA32_F_BIT);
+	if (mode == PSR_AA32_MODE_FIQ)
+		new |= PSR_AA32_F_BIT;
+
+	// CPSR.T is set to SCTLR.TE upon any exception
+	// See ARM DDI 0487E.a, page G8-5514
+	// See ARM DDI 0406C.d, page B1-1181
+	if (sctlr & BIT(30))
+		new |= PSR_AA32_T_BIT;
+
+	new |= mode;
+
+	return new;
+}
+
+/*
+ * Table taken from ARMv8 ARM DDI0487B-B, table G1-10.
+ */
+static const u8 return_offsets[8][2] = {
+	[0] = { 0, 0 },		/* Reset, unused */
+	[1] = { 4, 2 },		/* Undefined */
+	[2] = { 0, 0 },		/* SVC, unused */
+	[3] = { 4, 4 },		/* Prefetch abort */
+	[4] = { 8, 8 },		/* Data abort */
+	[5] = { 0, 0 },		/* HVC, unused */
+	[6] = { 4, 4 },		/* IRQ, unused */
+	[7] = { 4, 4 },		/* FIQ, unused */
+};
+
+static void enter_exception32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
+{
+	unsigned long spsr = *vcpu_cpsr(vcpu);
+	bool is_thumb = (spsr & PSR_AA32_T_BIT);
+	u32 sctlr = __vcpu_read_sys_reg(vcpu, SCTLR_EL1);
+	u32 return_address;
+
+	*vcpu_cpsr(vcpu) = get_except32_cpsr(vcpu, mode);
+	return_address   = *vcpu_pc(vcpu);
+	return_address  += return_offsets[vect_offset >> 2][is_thumb];
+
+	/* KVM only enters the ABT and UND modes, so only deal with those */
+	switch(mode) {
+	case PSR_AA32_MODE_ABT:
+		__vcpu_write_spsr_abt(vcpu, host_spsr_to_spsr32(spsr));
+		vcpu_gp_regs(vcpu)->compat_lr_abt = return_address;
+		break;
+
+	case PSR_AA32_MODE_UND:
+		__vcpu_write_spsr_und(vcpu, host_spsr_to_spsr32(spsr));
+		vcpu_gp_regs(vcpu)->compat_lr_und = return_address;
+		break;
+	}
+
+	/* Branch to exception vector */
+	if (sctlr & (1 << 13))
+		vect_offset += 0xffff0000;
+	else /* always have security exceptions */
+		vect_offset += __vcpu_read_sys_reg(vcpu, VBAR_EL1);
+
+	*vcpu_pc(vcpu) = vect_offset;
+}
+
+static void kvm_inject_exception(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_el1_is_32bit(vcpu)) {
+		switch (vcpu_get_flag(vcpu, EXCEPT_MASK)) {
+		case unpack_vcpu_flag(EXCEPT_AA32_UND):
+			enter_exception32(vcpu, PSR_AA32_MODE_UND, 4);
+			break;
+		case unpack_vcpu_flag(EXCEPT_AA32_IABT):
+			enter_exception32(vcpu, PSR_AA32_MODE_ABT, 12);
+			break;
+		case unpack_vcpu_flag(EXCEPT_AA32_DABT):
+			enter_exception32(vcpu, PSR_AA32_MODE_ABT, 16);
+			break;
+		default:
+			/* Err... */
+			break;
+		}
+	} else {
+		switch (vcpu_get_flag(vcpu, EXCEPT_MASK)) {
+		case unpack_vcpu_flag(EXCEPT_AA64_EL1_SYNC):
+			enter_exception64(vcpu, PSR_MODE_EL1h, except_type_sync);
+			break;
+
+		case unpack_vcpu_flag(EXCEPT_AA64_EL2_SYNC):
+			enter_exception64(vcpu, PSR_MODE_EL2h, except_type_sync);
+			break;
+
+		case unpack_vcpu_flag(EXCEPT_AA64_EL2_IRQ):
+			enter_exception64(vcpu, PSR_MODE_EL2h, except_type_irq);
+			break;
+
+		default:
+			/*
+			 * Only EL1_SYNC and EL2_{SYNC,IRQ} makes
+			 * sense so far. Everything else gets silently
+			 * ignored.
+			 */
+			break;
+		}
+	}
+}
+
+/*
+ * Adjust the guest PC (and potentially exception state) depending on
+ * flags provided by the emulation code.
+ */
+void __kvm_adjust_pc(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_get_flag(vcpu, PENDING_EXCEPTION)) {
+		kvm_inject_exception(vcpu);
+		vcpu_clear_flag(vcpu, PENDING_EXCEPTION);
+		vcpu_clear_flag(vcpu, EXCEPT_MASK);
+	} else if (vcpu_get_flag(vcpu, INCREMENT_PC)) {
+		kvm_skip_instr(vcpu);
+		vcpu_clear_flag(vcpu, INCREMENT_PC);
+	}
+}
diff --git a/arch/arm64/kvm/hyp/fpsimd.S b/arch/arm64/kvm/hyp/fpsimd.S
new file mode 100644
index 000000000..61e6f3ba7
--- /dev/null
+++ b/arch/arm64/kvm/hyp/fpsimd.S
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/fpsimdmacros.h>
+
+	.text
+
+SYM_FUNC_START(__fpsimd_save_state)
+	fpsimd_save	x0, 1
+	ret
+SYM_FUNC_END(__fpsimd_save_state)
+
+SYM_FUNC_START(__fpsimd_restore_state)
+	fpsimd_restore	x0, 1
+	ret
+SYM_FUNC_END(__fpsimd_restore_state)
+
+SYM_FUNC_START(__sve_restore_state)
+	mov	x2, #1
+	sve_load 0, x1, x2, 3
+	ret
+SYM_FUNC_END(__sve_restore_state)
diff --git a/arch/arm64/kvm/hyp/hyp-constants.c b/arch/arm64/kvm/hyp/hyp-constants.c
new file mode 100644
index 000000000..b257a3b4b
--- /dev/null
+++ b/arch/arm64/kvm/hyp/hyp-constants.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kbuild.h>
+#include <nvhe/memory.h>
+#include <nvhe/pkvm.h>
+
+int main(void)
+{
+	DEFINE(STRUCT_HYP_PAGE_SIZE,	sizeof(struct hyp_page));
+	DEFINE(PKVM_HYP_VM_SIZE,	sizeof(struct pkvm_hyp_vm));
+	DEFINE(PKVM_HYP_VCPU_SIZE,	sizeof(struct pkvm_hyp_vcpu));
+	return 0;
+}
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
new file mode 100644
index 000000000..03f97d719
--- /dev/null
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -0,0 +1,264 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015-2018 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/linkage.h>
+
+#include <asm/alternative.h>
+#include <asm/assembler.h>
+#include <asm/cpufeature.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/mmu.h>
+#include <asm/spectre.h>
+
+.macro save_caller_saved_regs_vect
+	/* x0 and x1 were saved in the vector entry */
+	stp	x2, x3,   [sp, #-16]!
+	stp	x4, x5,   [sp, #-16]!
+	stp	x6, x7,   [sp, #-16]!
+	stp	x8, x9,   [sp, #-16]!
+	stp	x10, x11, [sp, #-16]!
+	stp	x12, x13, [sp, #-16]!
+	stp	x14, x15, [sp, #-16]!
+	stp	x16, x17, [sp, #-16]!
+.endm
+
+.macro restore_caller_saved_regs_vect
+	ldp	x16, x17, [sp], #16
+	ldp	x14, x15, [sp], #16
+	ldp	x12, x13, [sp], #16
+	ldp	x10, x11, [sp], #16
+	ldp	x8, x9,   [sp], #16
+	ldp	x6, x7,   [sp], #16
+	ldp	x4, x5,   [sp], #16
+	ldp	x2, x3,   [sp], #16
+	ldp	x0, x1,   [sp], #16
+.endm
+
+	.text
+
+el1_sync:				// Guest trapped into EL2
+
+	mrs	x0, esr_el2
+	ubfx	x0, x0, #ESR_ELx_EC_SHIFT, #ESR_ELx_EC_WIDTH
+	cmp	x0, #ESR_ELx_EC_HVC64
+	ccmp	x0, #ESR_ELx_EC_HVC32, #4, ne
+	b.ne	el1_trap
+
+	/*
+	 * Fastest possible path for ARM_SMCCC_ARCH_WORKAROUND_1.
+	 * The workaround has already been applied on the host,
+	 * so let's quickly get back to the guest. We don't bother
+	 * restoring x1, as it can be clobbered anyway.
+	 */
+	ldr	x1, [sp]				// Guest's x0
+	eor	w1, w1, #ARM_SMCCC_ARCH_WORKAROUND_1
+	cbz	w1, wa_epilogue
+
+	/* ARM_SMCCC_ARCH_WORKAROUND_2 handling */
+	eor	w1, w1, #(ARM_SMCCC_ARCH_WORKAROUND_1 ^ \
+			  ARM_SMCCC_ARCH_WORKAROUND_2)
+	cbz	w1, wa_epilogue
+
+	eor	w1, w1, #(ARM_SMCCC_ARCH_WORKAROUND_2 ^ \
+			  ARM_SMCCC_ARCH_WORKAROUND_3)
+	cbnz	w1, el1_trap
+
+wa_epilogue:
+	mov	x0, xzr
+	add	sp, sp, #16
+	eret
+	sb
+
+el1_trap:
+	get_vcpu_ptr	x1, x0
+	mov	x0, #ARM_EXCEPTION_TRAP
+	b	__guest_exit
+
+el1_irq:
+el1_fiq:
+	get_vcpu_ptr	x1, x0
+	mov	x0, #ARM_EXCEPTION_IRQ
+	b	__guest_exit
+
+el1_error:
+	get_vcpu_ptr	x1, x0
+	mov	x0, #ARM_EXCEPTION_EL1_SERROR
+	b	__guest_exit
+
+el2_sync:
+	/* Check for illegal exception return */
+	mrs	x0, spsr_el2
+	tbnz	x0, #20, 1f
+
+	save_caller_saved_regs_vect
+	stp     x29, x30, [sp, #-16]!
+	bl	kvm_unexpected_el2_exception
+	ldp     x29, x30, [sp], #16
+	restore_caller_saved_regs_vect
+
+	eret
+
+1:
+	/* Let's attempt a recovery from the illegal exception return */
+	get_vcpu_ptr	x1, x0
+	mov	x0, #ARM_EXCEPTION_IL
+	b	__guest_exit
+
+
+el2_error:
+	save_caller_saved_regs_vect
+	stp     x29, x30, [sp, #-16]!
+
+	bl	kvm_unexpected_el2_exception
+
+	ldp     x29, x30, [sp], #16
+	restore_caller_saved_regs_vect
+
+	eret
+	sb
+
+.macro invalid_vector	label, target = __guest_exit_panic
+	.align	2
+SYM_CODE_START_LOCAL(\label)
+	b \target
+SYM_CODE_END(\label)
+.endm
+
+	/* None of these should ever happen */
+	invalid_vector	el2t_sync_invalid
+	invalid_vector	el2t_irq_invalid
+	invalid_vector	el2t_fiq_invalid
+	invalid_vector	el2t_error_invalid
+	invalid_vector	el2h_irq_invalid
+	invalid_vector	el2h_fiq_invalid
+
+	.ltorg
+
+	.align 11
+
+.macro check_preamble_length start, end
+/* kvm_patch_vector_branch() generates code that jumps over the preamble. */
+.if ((\end-\start) != KVM_VECTOR_PREAMBLE)
+	.error "KVM vector preamble length mismatch"
+.endif
+.endm
+
+.macro valid_vect target
+	.align 7
+661:
+	esb
+	stp	x0, x1, [sp, #-16]!
+662:
+	/*
+	 * spectre vectors __bp_harden_hyp_vecs generate br instructions at runtime
+	 * that jump at offset 8 at __kvm_hyp_vector.
+	 * As hyp .text is guarded section, it needs bti j.
+	 */
+	bti j
+	b	\target
+
+check_preamble_length 661b, 662b
+.endm
+
+.macro invalid_vect target
+	.align 7
+661:
+	nop
+	stp	x0, x1, [sp, #-16]!
+662:
+	/* Check valid_vect */
+	bti j
+	b	\target
+
+check_preamble_length 661b, 662b
+.endm
+
+SYM_CODE_START(__kvm_hyp_vector)
+	invalid_vect	el2t_sync_invalid	// Synchronous EL2t
+	invalid_vect	el2t_irq_invalid	// IRQ EL2t
+	invalid_vect	el2t_fiq_invalid	// FIQ EL2t
+	invalid_vect	el2t_error_invalid	// Error EL2t
+
+	valid_vect	el2_sync		// Synchronous EL2h
+	invalid_vect	el2h_irq_invalid	// IRQ EL2h
+	invalid_vect	el2h_fiq_invalid	// FIQ EL2h
+	valid_vect	el2_error		// Error EL2h
+
+	valid_vect	el1_sync		// Synchronous 64-bit EL1
+	valid_vect	el1_irq			// IRQ 64-bit EL1
+	valid_vect	el1_fiq			// FIQ 64-bit EL1
+	valid_vect	el1_error		// Error 64-bit EL1
+
+	valid_vect	el1_sync		// Synchronous 32-bit EL1
+	valid_vect	el1_irq			// IRQ 32-bit EL1
+	valid_vect	el1_fiq			// FIQ 32-bit EL1
+	valid_vect	el1_error		// Error 32-bit EL1
+SYM_CODE_END(__kvm_hyp_vector)
+
+.macro spectrev2_smccc_wa1_smc
+	sub	sp, sp, #(8 * 4)
+	stp	x2, x3, [sp, #(8 * 0)]
+	stp	x0, x1, [sp, #(8 * 2)]
+	alternative_cb ARM64_ALWAYS_SYSTEM, spectre_bhb_patch_wa3
+	/* Patched to mov WA3 when supported */
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_1
+	alternative_cb_end
+	smc	#0
+	ldp	x2, x3, [sp, #(8 * 0)]
+	add	sp, sp, #(8 * 2)
+.endm
+
+.macro hyp_ventry	indirect, spectrev2
+	.align	7
+1:	esb
+	.if \spectrev2 != 0
+	spectrev2_smccc_wa1_smc
+	.else
+	stp	x0, x1, [sp, #-16]!
+	mitigate_spectre_bhb_loop	x0
+	mitigate_spectre_bhb_clear_insn
+	.endif
+	.if \indirect != 0
+	alternative_cb ARM64_ALWAYS_SYSTEM, kvm_patch_vector_branch
+	/*
+	 * For ARM64_SPECTRE_V3A configurations, these NOPs get replaced with:
+	 *
+	 * movz	x0, #(addr & 0xffff)
+	 * movk	x0, #((addr >> 16) & 0xffff), lsl #16
+	 * movk	x0, #((addr >> 32) & 0xffff), lsl #32
+	 * br	x0
+	 *
+	 * Where:
+	 * addr = kern_hyp_va(__kvm_hyp_vector) + vector-offset + KVM_VECTOR_PREAMBLE.
+	 * See kvm_patch_vector_branch for details.
+	 */
+	nop
+	nop
+	nop
+	nop
+	alternative_cb_end
+	.endif
+	b	__kvm_hyp_vector + (1b - 0b + KVM_VECTOR_PREAMBLE)
+.endm
+
+.macro generate_vectors	indirect, spectrev2
+0:
+	.rept 16
+	hyp_ventry	\indirect, \spectrev2
+	.endr
+	.org 0b + SZ_2K		// Safety measure
+.endm
+
+	.align	11
+SYM_CODE_START(__bp_harden_hyp_vecs)
+	generate_vectors indirect = 0, spectrev2 = 1 // HYP_VECTOR_SPECTRE_DIRECT
+	generate_vectors indirect = 1, spectrev2 = 0 // HYP_VECTOR_INDIRECT
+	generate_vectors indirect = 1, spectrev2 = 1 // HYP_VECTOR_SPECTRE_INDIRECT
+1:	.org __bp_harden_hyp_vecs + __BP_HARDEN_HYP_VECS_SZ
+	.org 1b
+SYM_CODE_END(__bp_harden_hyp_vecs)
diff --git a/arch/arm64/kvm/hyp/include/hyp/adjust_pc.h b/arch/arm64/kvm/hyp/include/hyp/adjust_pc.h
new file mode 100644
index 000000000..4fdfeabef
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/hyp/adjust_pc.h
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Guest PC manipulation helpers
+ *
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Copyright (C) 2020 - Google LLC
+ * Author: Marc Zyngier <maz@kernel.org>
+ */
+
+#ifndef __ARM64_KVM_HYP_ADJUST_PC_H__
+#define __ARM64_KVM_HYP_ADJUST_PC_H__
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_host.h>
+
+static inline void kvm_skip_instr(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_mode_is_32bit(vcpu)) {
+		kvm_skip_instr32(vcpu);
+	} else {
+		*vcpu_pc(vcpu) += 4;
+		*vcpu_cpsr(vcpu) &= ~PSR_BTYPE_MASK;
+	}
+
+	/* advance the singlestep state machine */
+	*vcpu_cpsr(vcpu) &= ~DBG_SPSR_SS;
+}
+
+/*
+ * Skip an instruction which has been emulated at hyp while most guest sysregs
+ * are live.
+ */
+static inline void __kvm_skip_instr(struct kvm_vcpu *vcpu)
+{
+	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
+	vcpu_gp_regs(vcpu)->pstate = read_sysreg_el2(SYS_SPSR);
+
+	kvm_skip_instr(vcpu);
+
+	write_sysreg_el2(vcpu_gp_regs(vcpu)->pstate, SYS_SPSR);
+	write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR);
+}
+
+/*
+ * Skip an instruction while host sysregs are live.
+ * Assumes host is always 64-bit.
+ */
+static inline void kvm_skip_host_instr(void)
+{
+	write_sysreg_el2(read_sysreg_el2(SYS_ELR) + 4, SYS_ELR);
+}
+
+#endif
diff --git a/arch/arm64/kvm/hyp/include/hyp/debug-sr.h b/arch/arm64/kvm/hyp/include/hyp/debug-sr.h
new file mode 100644
index 000000000..961bbef10
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/hyp/debug-sr.h
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_HYP_DEBUG_SR_H__
+#define __ARM64_KVM_HYP_DEBUG_SR_H__
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+#define read_debug(r,n)		read_sysreg(r##n##_el1)
+#define write_debug(v,r,n)	write_sysreg(v, r##n##_el1)
+
+#define save_debug(ptr,reg,nr)						\
+	switch (nr) {							\
+	case 15:	ptr[15] = read_debug(reg, 15);			\
+			fallthrough;					\
+	case 14:	ptr[14] = read_debug(reg, 14);			\
+			fallthrough;					\
+	case 13:	ptr[13] = read_debug(reg, 13);			\
+			fallthrough;					\
+	case 12:	ptr[12] = read_debug(reg, 12);			\
+			fallthrough;					\
+	case 11:	ptr[11] = read_debug(reg, 11);			\
+			fallthrough;					\
+	case 10:	ptr[10] = read_debug(reg, 10);			\
+			fallthrough;					\
+	case 9:		ptr[9] = read_debug(reg, 9);			\
+			fallthrough;					\
+	case 8:		ptr[8] = read_debug(reg, 8);			\
+			fallthrough;					\
+	case 7:		ptr[7] = read_debug(reg, 7);			\
+			fallthrough;					\
+	case 6:		ptr[6] = read_debug(reg, 6);			\
+			fallthrough;					\
+	case 5:		ptr[5] = read_debug(reg, 5);			\
+			fallthrough;					\
+	case 4:		ptr[4] = read_debug(reg, 4);			\
+			fallthrough;					\
+	case 3:		ptr[3] = read_debug(reg, 3);			\
+			fallthrough;					\
+	case 2:		ptr[2] = read_debug(reg, 2);			\
+			fallthrough;					\
+	case 1:		ptr[1] = read_debug(reg, 1);			\
+			fallthrough;					\
+	default:	ptr[0] = read_debug(reg, 0);			\
+	}
+
+#define restore_debug(ptr,reg,nr)					\
+	switch (nr) {							\
+	case 15:	write_debug(ptr[15], reg, 15);			\
+			fallthrough;					\
+	case 14:	write_debug(ptr[14], reg, 14);			\
+			fallthrough;					\
+	case 13:	write_debug(ptr[13], reg, 13);			\
+			fallthrough;					\
+	case 12:	write_debug(ptr[12], reg, 12);			\
+			fallthrough;					\
+	case 11:	write_debug(ptr[11], reg, 11);			\
+			fallthrough;					\
+	case 10:	write_debug(ptr[10], reg, 10);			\
+			fallthrough;					\
+	case 9:		write_debug(ptr[9], reg, 9);			\
+			fallthrough;					\
+	case 8:		write_debug(ptr[8], reg, 8);			\
+			fallthrough;					\
+	case 7:		write_debug(ptr[7], reg, 7);			\
+			fallthrough;					\
+	case 6:		write_debug(ptr[6], reg, 6);			\
+			fallthrough;					\
+	case 5:		write_debug(ptr[5], reg, 5);			\
+			fallthrough;					\
+	case 4:		write_debug(ptr[4], reg, 4);			\
+			fallthrough;					\
+	case 3:		write_debug(ptr[3], reg, 3);			\
+			fallthrough;					\
+	case 2:		write_debug(ptr[2], reg, 2);			\
+			fallthrough;					\
+	case 1:		write_debug(ptr[1], reg, 1);			\
+			fallthrough;					\
+	default:	write_debug(ptr[0], reg, 0);			\
+	}
+
+static void __debug_save_state(struct kvm_guest_debug_arch *dbg,
+			       struct kvm_cpu_context *ctxt)
+{
+	u64 aa64dfr0;
+	int brps, wrps;
+
+	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
+	brps = (aa64dfr0 >> 12) & 0xf;
+	wrps = (aa64dfr0 >> 20) & 0xf;
+
+	save_debug(dbg->dbg_bcr, dbgbcr, brps);
+	save_debug(dbg->dbg_bvr, dbgbvr, brps);
+	save_debug(dbg->dbg_wcr, dbgwcr, wrps);
+	save_debug(dbg->dbg_wvr, dbgwvr, wrps);
+
+	ctxt_sys_reg(ctxt, MDCCINT_EL1) = read_sysreg(mdccint_el1);
+}
+
+static void __debug_restore_state(struct kvm_guest_debug_arch *dbg,
+				  struct kvm_cpu_context *ctxt)
+{
+	u64 aa64dfr0;
+	int brps, wrps;
+
+	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	brps = (aa64dfr0 >> 12) & 0xf;
+	wrps = (aa64dfr0 >> 20) & 0xf;
+
+	restore_debug(dbg->dbg_bcr, dbgbcr, brps);
+	restore_debug(dbg->dbg_bvr, dbgbvr, brps);
+	restore_debug(dbg->dbg_wcr, dbgwcr, wrps);
+	restore_debug(dbg->dbg_wvr, dbgwvr, wrps);
+
+	write_sysreg(ctxt_sys_reg(ctxt, MDCCINT_EL1), mdccint_el1);
+}
+
+static inline void __debug_switch_to_guest_common(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	struct kvm_guest_debug_arch *host_dbg;
+	struct kvm_guest_debug_arch *guest_dbg;
+
+	if (!vcpu_get_flag(vcpu, DEBUG_DIRTY))
+		return;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	guest_ctxt = &vcpu->arch.ctxt;
+	host_dbg = &vcpu->arch.host_debug_state.regs;
+	guest_dbg = kern_hyp_va(vcpu->arch.debug_ptr);
+
+	__debug_save_state(host_dbg, host_ctxt);
+	__debug_restore_state(guest_dbg, guest_ctxt);
+}
+
+static inline void __debug_switch_to_host_common(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	struct kvm_guest_debug_arch *host_dbg;
+	struct kvm_guest_debug_arch *guest_dbg;
+
+	if (!vcpu_get_flag(vcpu, DEBUG_DIRTY))
+		return;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	guest_ctxt = &vcpu->arch.ctxt;
+	host_dbg = &vcpu->arch.host_debug_state.regs;
+	guest_dbg = kern_hyp_va(vcpu->arch.debug_ptr);
+
+	__debug_save_state(guest_dbg, guest_ctxt);
+	__debug_restore_state(host_dbg, host_ctxt);
+
+	vcpu_clear_flag(vcpu, DEBUG_DIRTY);
+}
+
+#endif /* __ARM64_KVM_HYP_DEBUG_SR_H__ */
diff --git a/arch/arm64/kvm/hyp/include/hyp/fault.h b/arch/arm64/kvm/hyp/include/hyp/fault.h
new file mode 100644
index 000000000..9ddcfe2c3
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/hyp/fault.h
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_HYP_FAULT_H__
+#define __ARM64_KVM_HYP_FAULT_H__
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+static inline bool __translate_far_to_hpfar(u64 far, u64 *hpfar)
+{
+	u64 par, tmp;
+
+	/*
+	 * Resolve the IPA the hard way using the guest VA.
+	 *
+	 * Stage-1 translation already validated the memory access
+	 * rights. As such, we can use the EL1 translation regime, and
+	 * don't have to distinguish between EL0 and EL1 access.
+	 *
+	 * We do need to save/restore PAR_EL1 though, as we haven't
+	 * saved the guest context yet, and we may return early...
+	 */
+	par = read_sysreg_par();
+	if (!__kvm_at("s1e1r", far))
+		tmp = read_sysreg_par();
+	else
+		tmp = SYS_PAR_EL1_F; /* back to the guest */
+	write_sysreg(par, par_el1);
+
+	if (unlikely(tmp & SYS_PAR_EL1_F))
+		return false; /* Translation failed, back to guest */
+
+	/* Convert PAR to HPFAR format */
+	*hpfar = PAR_TO_HPFAR(tmp);
+	return true;
+}
+
+static inline bool __get_fault_info(u64 esr, struct kvm_vcpu_fault_info *fault)
+{
+	u64 hpfar, far;
+
+	far = read_sysreg_el2(SYS_FAR);
+
+	/*
+	 * The HPFAR can be invalid if the stage 2 fault did not
+	 * happen during a stage 1 page table walk (the ESR_EL2.S1PTW
+	 * bit is clear) and one of the two following cases are true:
+	 *   1. The fault was due to a permission fault
+	 *   2. The processor carries errata 834220
+	 *
+	 * Therefore, for all non S1PTW faults where we either have a
+	 * permission fault or the errata workaround is enabled, we
+	 * resolve the IPA using the AT instruction.
+	 */
+	if (!(esr & ESR_ELx_S1PTW) &&
+	    (cpus_have_final_cap(ARM64_WORKAROUND_834220) ||
+	     (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_PERM)) {
+		if (!__translate_far_to_hpfar(far, &hpfar))
+			return false;
+	} else {
+		hpfar = read_sysreg(hpfar_el2);
+	}
+
+	fault->far_el2 = far;
+	fault->hpfar_el2 = hpfar;
+	return true;
+}
+
+#endif
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
new file mode 100644
index 000000000..9cfe6bd1d
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -0,0 +1,727 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_HYP_SWITCH_H__
+#define __ARM64_KVM_HYP_SWITCH_H__
+
+#include <hyp/adjust_pc.h>
+#include <hyp/fault.h>
+
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+#include <linux/types.h>
+#include <linux/jump_label.h>
+#include <uapi/linux/psci.h>
+
+#include <kvm/arm_psci.h>
+
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/extable.h>
+#include <asm/kprobes.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_nested.h>
+#include <asm/fpsimd.h>
+#include <asm/debug-monitors.h>
+#include <asm/processor.h>
+
+struct kvm_exception_table_entry {
+	int insn, fixup;
+};
+
+extern struct kvm_exception_table_entry __start___kvm_ex_table;
+extern struct kvm_exception_table_entry __stop___kvm_ex_table;
+
+/* Check whether the FP regs are owned by the guest */
+static inline bool guest_owns_fp_regs(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.fp_state == FP_STATE_GUEST_OWNED;
+}
+
+/* Save the 32-bit only FPSIMD system register state */
+static inline void __fpsimd_save_fpexc32(struct kvm_vcpu *vcpu)
+{
+	if (!vcpu_el1_is_32bit(vcpu))
+		return;
+
+	__vcpu_sys_reg(vcpu, FPEXC32_EL2) = read_sysreg(fpexc32_el2);
+}
+
+static inline void __activate_traps_fpsimd32(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * We are about to set CPTR_EL2.TFP to trap all floating point
+	 * register accesses to EL2, however, the ARM ARM clearly states that
+	 * traps are only taken to EL2 if the operation would not otherwise
+	 * trap to EL1.  Therefore, always make sure that for 32-bit guests,
+	 * we set FPEXC.EN to prevent traps to EL1, when setting the TFP bit.
+	 * If FP/ASIMD is not implemented, FPEXC is UNDEFINED and any access to
+	 * it will cause an exception.
+	 */
+	if (vcpu_el1_is_32bit(vcpu) && system_supports_fpsimd()) {
+		write_sysreg(1 << 30, fpexc32_el2);
+		isb();
+	}
+}
+
+#define compute_clr_set(vcpu, reg, clr, set)				\
+	do {								\
+		u64 hfg;						\
+		hfg = __vcpu_sys_reg(vcpu, reg) & ~__ ## reg ## _RES0;	\
+		set |= hfg & __ ## reg ## _MASK; 			\
+		clr |= ~hfg & __ ## reg ## _nMASK; 			\
+	} while(0)
+
+
+static inline void __activate_traps_hfgxtr(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	u64 r_clr = 0, w_clr = 0, r_set = 0, w_set = 0, tmp;
+	u64 r_val, w_val;
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT))
+		return;
+
+	ctxt_sys_reg(hctxt, HFGRTR_EL2) = read_sysreg_s(SYS_HFGRTR_EL2);
+	ctxt_sys_reg(hctxt, HFGWTR_EL2) = read_sysreg_s(SYS_HFGWTR_EL2);
+
+	if (cpus_have_final_cap(ARM64_SME)) {
+		tmp = HFGxTR_EL2_nSMPRI_EL1_MASK | HFGxTR_EL2_nTPIDR2_EL0_MASK;
+
+		r_clr |= tmp;
+		w_clr |= tmp;
+	}
+
+	/*
+	 * Trap guest writes to TCR_EL1 to prevent it from enabling HA or HD.
+	 */
+	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
+		w_set |= HFGxTR_EL2_TCR_EL1_MASK;
+
+	if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
+		compute_clr_set(vcpu, HFGRTR_EL2, r_clr, r_set);
+		compute_clr_set(vcpu, HFGWTR_EL2, w_clr, w_set);
+	}
+
+	/* The default is not to trap anything but ACCDATA_EL1 */
+	r_val = __HFGRTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	r_val |= r_set;
+	r_val &= ~r_clr;
+
+	w_val = __HFGWTR_EL2_nMASK & ~HFGxTR_EL2_nACCDATA_EL1;
+	w_val |= w_set;
+	w_val &= ~w_clr;
+
+	write_sysreg_s(r_val, SYS_HFGRTR_EL2);
+	write_sysreg_s(w_val, SYS_HFGWTR_EL2);
+
+	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
+		return;
+
+	ctxt_sys_reg(hctxt, HFGITR_EL2) = read_sysreg_s(SYS_HFGITR_EL2);
+
+	r_set = r_clr = 0;
+	compute_clr_set(vcpu, HFGITR_EL2, r_clr, r_set);
+	r_val = __HFGITR_EL2_nMASK;
+	r_val |= r_set;
+	r_val &= ~r_clr;
+
+	write_sysreg_s(r_val, SYS_HFGITR_EL2);
+
+	ctxt_sys_reg(hctxt, HDFGRTR_EL2) = read_sysreg_s(SYS_HDFGRTR_EL2);
+	ctxt_sys_reg(hctxt, HDFGWTR_EL2) = read_sysreg_s(SYS_HDFGWTR_EL2);
+
+	r_clr = r_set = w_clr = w_set = 0;
+
+	compute_clr_set(vcpu, HDFGRTR_EL2, r_clr, r_set);
+	compute_clr_set(vcpu, HDFGWTR_EL2, w_clr, w_set);
+
+	r_val = __HDFGRTR_EL2_nMASK;
+	r_val |= r_set;
+	r_val &= ~r_clr;
+
+	w_val = __HDFGWTR_EL2_nMASK;
+	w_val |= w_set;
+	w_val &= ~w_clr;
+
+	write_sysreg_s(r_val, SYS_HDFGRTR_EL2);
+	write_sysreg_s(w_val, SYS_HDFGWTR_EL2);
+}
+
+static inline void __deactivate_traps_hfgxtr(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+
+	if (!cpus_have_final_cap(ARM64_HAS_FGT))
+		return;
+
+	write_sysreg_s(ctxt_sys_reg(hctxt, HFGRTR_EL2), SYS_HFGRTR_EL2);
+	write_sysreg_s(ctxt_sys_reg(hctxt, HFGWTR_EL2), SYS_HFGWTR_EL2);
+
+	if (!vcpu_has_nv(vcpu) || is_hyp_ctxt(vcpu))
+		return;
+
+	write_sysreg_s(ctxt_sys_reg(hctxt, HFGITR_EL2), SYS_HFGITR_EL2);
+	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGRTR_EL2), SYS_HDFGRTR_EL2);
+	write_sysreg_s(ctxt_sys_reg(hctxt, HDFGWTR_EL2), SYS_HDFGWTR_EL2);
+}
+
+static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
+{
+	/* Trap on AArch32 cp15 c15 (impdef sysregs) accesses (EL1 or EL0) */
+	write_sysreg(1 << 15, hstr_el2);
+
+	/*
+	 * Make sure we trap PMU access from EL0 to EL2. Also sanitize
+	 * PMSELR_EL0 to make sure it never contains the cycle
+	 * counter, which could make a PMXEVCNTR_EL0 access UNDEF at
+	 * EL1 instead of being trapped to EL2.
+	 */
+	if (kvm_arm_support_pmu_v3()) {
+		struct kvm_cpu_context *hctxt;
+
+		write_sysreg(0, pmselr_el0);
+
+		hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+		ctxt_sys_reg(hctxt, PMUSERENR_EL0) = read_sysreg(pmuserenr_el0);
+		write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
+		vcpu_set_flag(vcpu, PMUSERENR_ON_CPU);
+	}
+
+	vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2);
+	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
+	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
+		u64 hcrx = HCRX_GUEST_FLAGS;
+		if (vcpu_has_nv(vcpu) && !is_hyp_ctxt(vcpu)) {
+			u64 clr = 0, set = 0;
+
+			compute_clr_set(vcpu, HCRX_EL2, clr, set);
+
+			hcrx |= set;
+			hcrx &= ~clr;
+		}
+
+		write_sysreg_s(hcrx, SYS_HCRX_EL2);
+	}
+
+	__activate_traps_hfgxtr(vcpu);
+}
+
+static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
+{
+	write_sysreg(vcpu->arch.mdcr_el2_host, mdcr_el2);
+
+	write_sysreg(0, hstr_el2);
+	if (kvm_arm_support_pmu_v3()) {
+		struct kvm_cpu_context *hctxt;
+
+		hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+		write_sysreg(ctxt_sys_reg(hctxt, PMUSERENR_EL0), pmuserenr_el0);
+		vcpu_clear_flag(vcpu, PMUSERENR_ON_CPU);
+	}
+
+	if (cpus_have_final_cap(ARM64_HAS_HCX))
+		write_sysreg_s(HCRX_HOST_FLAGS, SYS_HCRX_EL2);
+
+	__deactivate_traps_hfgxtr(vcpu);
+}
+
+static inline void ___activate_traps(struct kvm_vcpu *vcpu)
+{
+	u64 hcr = vcpu->arch.hcr_el2;
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM))
+		hcr |= HCR_TVM;
+
+	write_sysreg(hcr, hcr_el2);
+
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE))
+		write_sysreg_s(vcpu->arch.vsesr_el2, SYS_VSESR_EL2);
+}
+
+static inline void ___deactivate_traps(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * If we pended a virtual abort, preserve it until it gets
+	 * cleared. See D1.14.3 (Virtual Interrupts) for details, but
+	 * the crucial bit is "On taking a vSError interrupt,
+	 * HCR_EL2.VSE is cleared to 0."
+	 */
+	if (vcpu->arch.hcr_el2 & HCR_VSE) {
+		vcpu->arch.hcr_el2 &= ~HCR_VSE;
+		vcpu->arch.hcr_el2 |= read_sysreg(hcr_el2) & HCR_VSE;
+	}
+}
+
+static inline bool __populate_fault_info(struct kvm_vcpu *vcpu)
+{
+	return __get_fault_info(vcpu->arch.fault.esr_el2, &vcpu->arch.fault);
+}
+
+static inline void __hyp_sve_restore_guest(struct kvm_vcpu *vcpu)
+{
+	sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1, SYS_ZCR_EL2);
+	__sve_restore_state(vcpu_sve_pffr(vcpu),
+			    &vcpu->arch.ctxt.fp_regs.fpsr);
+	write_sysreg_el1(__vcpu_sys_reg(vcpu, ZCR_EL1), SYS_ZCR);
+}
+
+/*
+ * We trap the first access to the FP/SIMD to save the host context and
+ * restore the guest context lazily.
+ * If FP/SIMD is not implemented, handle the trap and inject an undefined
+ * instruction exception to the guest. Similarly for trapped SVE accesses.
+ */
+static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	bool sve_guest;
+	u8 esr_ec;
+	u64 reg;
+
+	if (!system_supports_fpsimd())
+		return false;
+
+	sve_guest = vcpu_has_sve(vcpu);
+	esr_ec = kvm_vcpu_trap_get_class(vcpu);
+
+	/* Only handle traps the vCPU can support here: */
+	switch (esr_ec) {
+	case ESR_ELx_EC_FP_ASIMD:
+		break;
+	case ESR_ELx_EC_SVE:
+		if (!sve_guest)
+			return false;
+		break;
+	default:
+		return false;
+	}
+
+	/* Valid trap.  Switch the context: */
+
+	/* First disable enough traps to allow us to update the registers */
+	if (has_vhe() || has_hvhe()) {
+		reg = CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN;
+		if (sve_guest)
+			reg |= CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN;
+
+		sysreg_clear_set(cpacr_el1, 0, reg);
+	} else {
+		reg = CPTR_EL2_TFP;
+		if (sve_guest)
+			reg |= CPTR_EL2_TZ;
+
+		sysreg_clear_set(cptr_el2, reg, 0);
+	}
+	isb();
+
+	/* Write out the host state if it's in the registers */
+	if (vcpu->arch.fp_state == FP_STATE_HOST_OWNED)
+		__fpsimd_save_state(vcpu->arch.host_fpsimd_state);
+
+	/* Restore the guest state */
+	if (sve_guest)
+		__hyp_sve_restore_guest(vcpu);
+	else
+		__fpsimd_restore_state(&vcpu->arch.ctxt.fp_regs);
+
+	/* Skip restoring fpexc32 for AArch64 guests */
+	if (!(read_sysreg(hcr_el2) & HCR_RW))
+		write_sysreg(__vcpu_sys_reg(vcpu, FPEXC32_EL2), fpexc32_el2);
+
+	vcpu->arch.fp_state = FP_STATE_GUEST_OWNED;
+
+	return true;
+}
+
+static inline bool handle_tx2_tvm(struct kvm_vcpu *vcpu)
+{
+	u32 sysreg = esr_sys64_to_sysreg(kvm_vcpu_get_esr(vcpu));
+	int rt = kvm_vcpu_sys_get_rt(vcpu);
+	u64 val = vcpu_get_reg(vcpu, rt);
+
+	/*
+	 * The normal sysreg handling code expects to see the traps,
+	 * let's not do anything here.
+	 */
+	if (vcpu->arch.hcr_el2 & HCR_TVM)
+		return false;
+
+	switch (sysreg) {
+	case SYS_SCTLR_EL1:
+		write_sysreg_el1(val, SYS_SCTLR);
+		break;
+	case SYS_TTBR0_EL1:
+		write_sysreg_el1(val, SYS_TTBR0);
+		break;
+	case SYS_TTBR1_EL1:
+		write_sysreg_el1(val, SYS_TTBR1);
+		break;
+	case SYS_TCR_EL1:
+		write_sysreg_el1(val, SYS_TCR);
+		break;
+	case SYS_ESR_EL1:
+		write_sysreg_el1(val, SYS_ESR);
+		break;
+	case SYS_FAR_EL1:
+		write_sysreg_el1(val, SYS_FAR);
+		break;
+	case SYS_AFSR0_EL1:
+		write_sysreg_el1(val, SYS_AFSR0);
+		break;
+	case SYS_AFSR1_EL1:
+		write_sysreg_el1(val, SYS_AFSR1);
+		break;
+	case SYS_MAIR_EL1:
+		write_sysreg_el1(val, SYS_MAIR);
+		break;
+	case SYS_AMAIR_EL1:
+		write_sysreg_el1(val, SYS_AMAIR);
+		break;
+	case SYS_CONTEXTIDR_EL1:
+		write_sysreg_el1(val, SYS_CONTEXTIDR);
+		break;
+	default:
+		return false;
+	}
+
+	__kvm_skip_instr(vcpu);
+	return true;
+}
+
+static inline bool esr_is_ptrauth_trap(u64 esr)
+{
+	switch (esr_sys64_to_sysreg(esr)) {
+	case SYS_APIAKEYLO_EL1:
+	case SYS_APIAKEYHI_EL1:
+	case SYS_APIBKEYLO_EL1:
+	case SYS_APIBKEYHI_EL1:
+	case SYS_APDAKEYLO_EL1:
+	case SYS_APDAKEYHI_EL1:
+	case SYS_APDBKEYLO_EL1:
+	case SYS_APDBKEYHI_EL1:
+	case SYS_APGAKEYLO_EL1:
+	case SYS_APGAKEYHI_EL1:
+		return true;
+	}
+
+	return false;
+}
+
+#define __ptrauth_save_key(ctxt, key)					\
+	do {								\
+	u64 __val;                                                      \
+	__val = read_sysreg_s(SYS_ ## key ## KEYLO_EL1);                \
+	ctxt_sys_reg(ctxt, key ## KEYLO_EL1) = __val;                   \
+	__val = read_sysreg_s(SYS_ ## key ## KEYHI_EL1);                \
+	ctxt_sys_reg(ctxt, key ## KEYHI_EL1) = __val;                   \
+} while(0)
+
+DECLARE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
+
+static bool kvm_hyp_handle_ptrauth(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	struct kvm_cpu_context *ctxt;
+	u64 val;
+
+	if (!vcpu_has_ptrauth(vcpu))
+		return false;
+
+	ctxt = this_cpu_ptr(&kvm_hyp_ctxt);
+	__ptrauth_save_key(ctxt, APIA);
+	__ptrauth_save_key(ctxt, APIB);
+	__ptrauth_save_key(ctxt, APDA);
+	__ptrauth_save_key(ctxt, APDB);
+	__ptrauth_save_key(ctxt, APGA);
+
+	vcpu_ptrauth_enable(vcpu);
+
+	val = read_sysreg(hcr_el2);
+	val |= (HCR_API | HCR_APK);
+	write_sysreg(val, hcr_el2);
+
+	return true;
+}
+
+static bool kvm_hyp_handle_cntpct(struct kvm_vcpu *vcpu)
+{
+	struct arch_timer_context *ctxt;
+	u32 sysreg;
+	u64 val;
+
+	/*
+	 * We only get here for 64bit guests, 32bit guests will hit
+	 * the long and winding road all the way to the standard
+	 * handling. Yes, it sucks to be irrelevant.
+	 */
+	sysreg = esr_sys64_to_sysreg(kvm_vcpu_get_esr(vcpu));
+
+	switch (sysreg) {
+	case SYS_CNTPCT_EL0:
+	case SYS_CNTPCTSS_EL0:
+		if (vcpu_has_nv(vcpu)) {
+			if (is_hyp_ctxt(vcpu)) {
+				ctxt = vcpu_hptimer(vcpu);
+				break;
+			}
+
+			/* Check for guest hypervisor trapping */
+			val = __vcpu_sys_reg(vcpu, CNTHCTL_EL2);
+			if (!vcpu_el2_e2h_is_set(vcpu))
+				val = (val & CNTHCTL_EL1PCTEN) << 10;
+
+			if (!(val & (CNTHCTL_EL1PCTEN << 10)))
+				return false;
+		}
+
+		ctxt = vcpu_ptimer(vcpu);
+		break;
+	default:
+		return false;
+	}
+
+	val = arch_timer_read_cntpct_el0();
+
+	if (ctxt->offset.vm_offset)
+		val -= *kern_hyp_va(ctxt->offset.vm_offset);
+	if (ctxt->offset.vcpu_offset)
+		val -= *kern_hyp_va(ctxt->offset.vcpu_offset);
+
+	vcpu_set_reg(vcpu, kvm_vcpu_sys_get_rt(vcpu), val);
+	__kvm_skip_instr(vcpu);
+	return true;
+}
+
+static bool handle_ampere1_tcr(struct kvm_vcpu *vcpu)
+{
+	u32 sysreg = esr_sys64_to_sysreg(kvm_vcpu_get_esr(vcpu));
+	int rt = kvm_vcpu_sys_get_rt(vcpu);
+	u64 val = vcpu_get_reg(vcpu, rt);
+
+	if (sysreg != SYS_TCR_EL1)
+		return false;
+
+	/*
+	 * Affected parts do not advertise support for hardware Access Flag /
+	 * Dirty state management in ID_AA64MMFR1_EL1.HAFDBS, but the underlying
+	 * control bits are still functional. The architecture requires these be
+	 * RES0 on systems that do not implement FEAT_HAFDBS.
+	 *
+	 * Uphold the requirements of the architecture by masking guest writes
+	 * to TCR_EL1.{HA,HD} here.
+	 */
+	val &= ~(TCR_HD | TCR_HA);
+	write_sysreg_el1(val, SYS_TCR);
+	__kvm_skip_instr(vcpu);
+	return true;
+}
+
+static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) &&
+	    handle_tx2_tvm(vcpu))
+		return true;
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38) &&
+	    handle_ampere1_tcr(vcpu))
+		return true;
+
+	if (static_branch_unlikely(&vgic_v3_cpuif_trap) &&
+	    __vgic_v3_perform_cpuif_access(vcpu) == 1)
+		return true;
+
+	if (esr_is_ptrauth_trap(kvm_vcpu_get_esr(vcpu)))
+		return kvm_hyp_handle_ptrauth(vcpu, exit_code);
+
+	if (kvm_hyp_handle_cntpct(vcpu))
+		return true;
+
+	return false;
+}
+
+static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	if (static_branch_unlikely(&vgic_v3_cpuif_trap) &&
+	    __vgic_v3_perform_cpuif_access(vcpu) == 1)
+		return true;
+
+	return false;
+}
+
+static bool kvm_hyp_handle_memory_fault(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	if (!__populate_fault_info(vcpu))
+		return true;
+
+	return false;
+}
+static bool kvm_hyp_handle_iabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+	__alias(kvm_hyp_handle_memory_fault);
+static bool kvm_hyp_handle_watchpt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+	__alias(kvm_hyp_handle_memory_fault);
+
+static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	if (kvm_hyp_handle_memory_fault(vcpu, exit_code))
+		return true;
+
+	if (static_branch_unlikely(&vgic_v2_cpuif_trap)) {
+		bool valid;
+
+		valid = kvm_vcpu_trap_get_fault_type(vcpu) == ESR_ELx_FSC_FAULT &&
+			kvm_vcpu_dabt_isvalid(vcpu) &&
+			!kvm_vcpu_abt_issea(vcpu) &&
+			!kvm_vcpu_abt_iss1tw(vcpu);
+
+		if (valid) {
+			int ret = __vgic_v2_perform_cpuif_access(vcpu);
+
+			if (ret == 1)
+				return true;
+
+			/* Promote an illegal access to an SError.*/
+			if (ret == -1)
+				*exit_code = ARM_EXCEPTION_EL1_SERROR;
+		}
+	}
+
+	return false;
+}
+
+typedef bool (*exit_handler_fn)(struct kvm_vcpu *, u64 *);
+
+static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
+
+static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
+
+/*
+ * Allow the hypervisor to handle the exit with an exit handler if it has one.
+ *
+ * Returns true if the hypervisor handled the exit, and control should go back
+ * to the guest, or false if it hasn't.
+ */
+static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	const exit_handler_fn *handlers = kvm_get_exit_handler_array(vcpu);
+	exit_handler_fn fn;
+
+	fn = handlers[kvm_vcpu_trap_get_class(vcpu)];
+
+	if (fn)
+		return fn(vcpu, exit_code);
+
+	return false;
+}
+
+static inline void synchronize_vcpu_pstate(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	/*
+	 * Check for the conditions of Cortex-A510's #2077057. When these occur
+	 * SPSR_EL2 can't be trusted, but isn't needed either as it is
+	 * unchanged from the value in vcpu_gp_regs(vcpu)->pstate.
+	 * Are we single-stepping the guest, and took a PAC exception from the
+	 * active-not-pending state?
+	 */
+	if (cpus_have_final_cap(ARM64_WORKAROUND_2077057)		&&
+	    vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP			&&
+	    *vcpu_cpsr(vcpu) & DBG_SPSR_SS				&&
+	    ESR_ELx_EC(read_sysreg_el2(SYS_ESR)) == ESR_ELx_EC_PAC)
+		write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR);
+
+	vcpu->arch.ctxt.regs.pstate = read_sysreg_el2(SYS_SPSR);
+}
+
+/*
+ * Return true when we were able to fixup the guest exit and should return to
+ * the guest, false when we should restore the host state and return to the
+ * main run loop.
+ */
+static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	/*
+	 * Save PSTATE early so that we can evaluate the vcpu mode
+	 * early on.
+	 */
+	synchronize_vcpu_pstate(vcpu, exit_code);
+
+	/*
+	 * Check whether we want to repaint the state one way or
+	 * another.
+	 */
+	early_exit_filter(vcpu, exit_code);
+
+	if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ)
+		vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR);
+
+	if (ARM_SERROR_PENDING(*exit_code) &&
+	    ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ) {
+		u8 esr_ec = kvm_vcpu_trap_get_class(vcpu);
+
+		/*
+		 * HVC already have an adjusted PC, which we need to
+		 * correct in order to return to after having injected
+		 * the SError.
+		 *
+		 * SMC, on the other hand, is *trapped*, meaning its
+		 * preferred return address is the SMC itself.
+		 */
+		if (esr_ec == ESR_ELx_EC_HVC32 || esr_ec == ESR_ELx_EC_HVC64)
+			write_sysreg_el2(read_sysreg_el2(SYS_ELR) - 4, SYS_ELR);
+	}
+
+	/*
+	 * We're using the raw exception code in order to only process
+	 * the trap if no SError is pending. We will come back to the
+	 * same PC once the SError has been injected, and replay the
+	 * trapping instruction.
+	 */
+	if (*exit_code != ARM_EXCEPTION_TRAP)
+		goto exit;
+
+	/* Check if there's an exit handler and allow it to handle the exit. */
+	if (kvm_hyp_handle_exit(vcpu, exit_code))
+		goto guest;
+exit:
+	/* Return to the host kernel and handle the exit */
+	return false;
+
+guest:
+	/* Re-enter the guest */
+	asm(ALTERNATIVE("nop", "dmb sy", ARM64_WORKAROUND_1508412));
+	return true;
+}
+
+static inline void __kvm_unexpected_el2_exception(void)
+{
+	extern char __guest_exit_panic[];
+	unsigned long addr, fixup;
+	struct kvm_exception_table_entry *entry, *end;
+	unsigned long elr_el2 = read_sysreg(elr_el2);
+
+	entry = &__start___kvm_ex_table;
+	end = &__stop___kvm_ex_table;
+
+	while (entry < end) {
+		addr = (unsigned long)&entry->insn + entry->insn;
+		fixup = (unsigned long)&entry->fixup + entry->fixup;
+
+		if (addr != elr_el2) {
+			entry++;
+			continue;
+		}
+
+		write_sysreg(fixup, elr_el2);
+		return;
+	}
+
+	/* Trigger a panic after restoring the hyp context. */
+	write_sysreg(__guest_exit_panic, elr_el2);
+}
+
+#endif /* __ARM64_KVM_HYP_SWITCH_H__ */
diff --git a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
new file mode 100644
index 000000000..bb6b571ec
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#ifndef __ARM64_KVM_HYP_SYSREG_SR_H__
+#define __ARM64_KVM_HYP_SYSREG_SR_H__
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kprobes.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+static inline void __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt_sys_reg(ctxt, MDSCR_EL1)	= read_sysreg(mdscr_el1);
+}
+
+static inline void __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt_sys_reg(ctxt, TPIDR_EL0)	= read_sysreg(tpidr_el0);
+	ctxt_sys_reg(ctxt, TPIDRRO_EL0)	= read_sysreg(tpidrro_el0);
+}
+
+static inline bool ctxt_has_mte(struct kvm_cpu_context *ctxt)
+{
+	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
+
+	if (!vcpu)
+		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
+
+	return kvm_has_mte(kern_hyp_va(vcpu->kvm));
+}
+
+static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt_sys_reg(ctxt, SCTLR_EL1)	= read_sysreg_el1(SYS_SCTLR);
+	ctxt_sys_reg(ctxt, CPACR_EL1)	= read_sysreg_el1(SYS_CPACR);
+	ctxt_sys_reg(ctxt, TTBR0_EL1)	= read_sysreg_el1(SYS_TTBR0);
+	ctxt_sys_reg(ctxt, TTBR1_EL1)	= read_sysreg_el1(SYS_TTBR1);
+	ctxt_sys_reg(ctxt, TCR_EL1)	= read_sysreg_el1(SYS_TCR);
+	if (cpus_have_final_cap(ARM64_HAS_TCR2))
+		ctxt_sys_reg(ctxt, TCR2_EL1)	= read_sysreg_el1(SYS_TCR2);
+	ctxt_sys_reg(ctxt, ESR_EL1)	= read_sysreg_el1(SYS_ESR);
+	ctxt_sys_reg(ctxt, AFSR0_EL1)	= read_sysreg_el1(SYS_AFSR0);
+	ctxt_sys_reg(ctxt, AFSR1_EL1)	= read_sysreg_el1(SYS_AFSR1);
+	ctxt_sys_reg(ctxt, FAR_EL1)	= read_sysreg_el1(SYS_FAR);
+	ctxt_sys_reg(ctxt, MAIR_EL1)	= read_sysreg_el1(SYS_MAIR);
+	ctxt_sys_reg(ctxt, VBAR_EL1)	= read_sysreg_el1(SYS_VBAR);
+	ctxt_sys_reg(ctxt, CONTEXTIDR_EL1) = read_sysreg_el1(SYS_CONTEXTIDR);
+	ctxt_sys_reg(ctxt, AMAIR_EL1)	= read_sysreg_el1(SYS_AMAIR);
+	ctxt_sys_reg(ctxt, CNTKCTL_EL1)	= read_sysreg_el1(SYS_CNTKCTL);
+	if (cpus_have_final_cap(ARM64_HAS_S1PIE)) {
+		ctxt_sys_reg(ctxt, PIR_EL1)	= read_sysreg_el1(SYS_PIR);
+		ctxt_sys_reg(ctxt, PIRE0_EL1)	= read_sysreg_el1(SYS_PIRE0);
+	}
+	ctxt_sys_reg(ctxt, PAR_EL1)	= read_sysreg_par();
+	ctxt_sys_reg(ctxt, TPIDR_EL1)	= read_sysreg(tpidr_el1);
+
+	if (ctxt_has_mte(ctxt)) {
+		ctxt_sys_reg(ctxt, TFSR_EL1) = read_sysreg_el1(SYS_TFSR);
+		ctxt_sys_reg(ctxt, TFSRE0_EL1) = read_sysreg_s(SYS_TFSRE0_EL1);
+	}
+
+	ctxt_sys_reg(ctxt, SP_EL1)	= read_sysreg(sp_el1);
+	ctxt_sys_reg(ctxt, ELR_EL1)	= read_sysreg_el1(SYS_ELR);
+	ctxt_sys_reg(ctxt, SPSR_EL1)	= read_sysreg_el1(SYS_SPSR);
+}
+
+static inline void __sysreg_save_el2_return_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->regs.pc			= read_sysreg_el2(SYS_ELR);
+	/*
+	 * Guest PSTATE gets saved at guest fixup time in all
+	 * cases. We still need to handle the nVHE host side here.
+	 */
+	if (!has_vhe() && ctxt->__hyp_running_vcpu)
+		ctxt->regs.pstate	= read_sysreg_el2(SYS_SPSR);
+
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+		ctxt_sys_reg(ctxt, DISR_EL1) = read_sysreg_s(SYS_VDISR_EL2);
+}
+
+static inline void __sysreg_restore_common_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt_sys_reg(ctxt, MDSCR_EL1),  mdscr_el1);
+}
+
+static inline void __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL0),	tpidr_el0);
+	write_sysreg(ctxt_sys_reg(ctxt, TPIDRRO_EL0),	tpidrro_el0);
+}
+
+static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt_sys_reg(ctxt, MPIDR_EL1),	vmpidr_el2);
+
+	if (has_vhe() ||
+	    !cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		write_sysreg_el1(ctxt_sys_reg(ctxt, SCTLR_EL1),	SYS_SCTLR);
+		write_sysreg_el1(ctxt_sys_reg(ctxt, TCR_EL1),	SYS_TCR);
+	} else	if (!ctxt->__hyp_running_vcpu) {
+		/*
+		 * Must only be done for guest registers, hence the context
+		 * test. We're coming from the host, so SCTLR.M is already
+		 * set. Pairs with nVHE's __activate_traps().
+		 */
+		write_sysreg_el1((ctxt_sys_reg(ctxt, TCR_EL1) |
+				  TCR_EPD1_MASK | TCR_EPD0_MASK),
+				 SYS_TCR);
+		isb();
+	}
+
+	write_sysreg_el1(ctxt_sys_reg(ctxt, CPACR_EL1),	SYS_CPACR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, TTBR0_EL1),	SYS_TTBR0);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, TTBR1_EL1),	SYS_TTBR1);
+	if (cpus_have_final_cap(ARM64_HAS_TCR2))
+		write_sysreg_el1(ctxt_sys_reg(ctxt, TCR2_EL1),	SYS_TCR2);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, ESR_EL1),	SYS_ESR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, AFSR0_EL1),	SYS_AFSR0);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, AFSR1_EL1),	SYS_AFSR1);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, FAR_EL1),	SYS_FAR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, MAIR_EL1),	SYS_MAIR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, VBAR_EL1),	SYS_VBAR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, CONTEXTIDR_EL1), SYS_CONTEXTIDR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, AMAIR_EL1),	SYS_AMAIR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, CNTKCTL_EL1), SYS_CNTKCTL);
+	if (cpus_have_final_cap(ARM64_HAS_S1PIE)) {
+		write_sysreg_el1(ctxt_sys_reg(ctxt, PIR_EL1),	SYS_PIR);
+		write_sysreg_el1(ctxt_sys_reg(ctxt, PIRE0_EL1),	SYS_PIRE0);
+	}
+	write_sysreg(ctxt_sys_reg(ctxt, PAR_EL1),	par_el1);
+	write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL1),	tpidr_el1);
+
+	if (ctxt_has_mte(ctxt)) {
+		write_sysreg_el1(ctxt_sys_reg(ctxt, TFSR_EL1), SYS_TFSR);
+		write_sysreg_s(ctxt_sys_reg(ctxt, TFSRE0_EL1), SYS_TFSRE0_EL1);
+	}
+
+	if (!has_vhe() &&
+	    cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT) &&
+	    ctxt->__hyp_running_vcpu) {
+		/*
+		 * Must only be done for host registers, hence the context
+		 * test. Pairs with nVHE's __deactivate_traps().
+		 */
+		isb();
+		/*
+		 * At this stage, and thanks to the above isb(), S2 is
+		 * deconfigured and disabled. We can now restore the host's
+		 * S1 configuration: SCTLR, and only then TCR.
+		 */
+		write_sysreg_el1(ctxt_sys_reg(ctxt, SCTLR_EL1),	SYS_SCTLR);
+		isb();
+		write_sysreg_el1(ctxt_sys_reg(ctxt, TCR_EL1),	SYS_TCR);
+	}
+
+	write_sysreg(ctxt_sys_reg(ctxt, SP_EL1),	sp_el1);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, ELR_EL1),	SYS_ELR);
+	write_sysreg_el1(ctxt_sys_reg(ctxt, SPSR_EL1),	SYS_SPSR);
+}
+
+/* Read the VCPU state's PSTATE, but translate (v)EL2 to EL1. */
+static inline u64 to_hw_pstate(const struct kvm_cpu_context *ctxt)
+{
+	u64 mode = ctxt->regs.pstate & (PSR_MODE_MASK | PSR_MODE32_BIT);
+
+	switch (mode) {
+	case PSR_MODE_EL2t:
+		mode = PSR_MODE_EL1t;
+		break;
+	case PSR_MODE_EL2h:
+		mode = PSR_MODE_EL1h;
+		break;
+	}
+
+	return (ctxt->regs.pstate & ~(PSR_MODE_MASK | PSR_MODE32_BIT)) | mode;
+}
+
+static inline void __sysreg_restore_el2_return_state(struct kvm_cpu_context *ctxt)
+{
+	u64 pstate = to_hw_pstate(ctxt);
+	u64 mode = pstate & PSR_AA32_MODE_MASK;
+
+	/*
+	 * Safety check to ensure we're setting the CPU up to enter the guest
+	 * in a less privileged mode.
+	 *
+	 * If we are attempting a return to EL2 or higher in AArch64 state,
+	 * program SPSR_EL2 with M=EL2h and the IL bit set which ensures that
+	 * we'll take an illegal exception state exception immediately after
+	 * the ERET to the guest.  Attempts to return to AArch32 Hyp will
+	 * result in an illegal exception return because EL2's execution state
+	 * is determined by SCR_EL3.RW.
+	 */
+	if (!(mode & PSR_MODE32_BIT) && mode >= PSR_MODE_EL2t)
+		pstate = PSR_MODE_EL2h | PSR_IL_BIT;
+
+	write_sysreg_el2(ctxt->regs.pc,			SYS_ELR);
+	write_sysreg_el2(pstate,			SYS_SPSR);
+
+	if (cpus_have_final_cap(ARM64_HAS_RAS_EXTN))
+		write_sysreg_s(ctxt_sys_reg(ctxt, DISR_EL1), SYS_VDISR_EL2);
+}
+
+static inline void __sysreg32_save_state(struct kvm_vcpu *vcpu)
+{
+	if (!vcpu_el1_is_32bit(vcpu))
+		return;
+
+	vcpu->arch.ctxt.spsr_abt = read_sysreg(spsr_abt);
+	vcpu->arch.ctxt.spsr_und = read_sysreg(spsr_und);
+	vcpu->arch.ctxt.spsr_irq = read_sysreg(spsr_irq);
+	vcpu->arch.ctxt.spsr_fiq = read_sysreg(spsr_fiq);
+
+	__vcpu_sys_reg(vcpu, DACR32_EL2) = read_sysreg(dacr32_el2);
+	__vcpu_sys_reg(vcpu, IFSR32_EL2) = read_sysreg(ifsr32_el2);
+
+	if (has_vhe() || vcpu_get_flag(vcpu, DEBUG_DIRTY))
+		__vcpu_sys_reg(vcpu, DBGVCR32_EL2) = read_sysreg(dbgvcr32_el2);
+}
+
+static inline void __sysreg32_restore_state(struct kvm_vcpu *vcpu)
+{
+	if (!vcpu_el1_is_32bit(vcpu))
+		return;
+
+	write_sysreg(vcpu->arch.ctxt.spsr_abt, spsr_abt);
+	write_sysreg(vcpu->arch.ctxt.spsr_und, spsr_und);
+	write_sysreg(vcpu->arch.ctxt.spsr_irq, spsr_irq);
+	write_sysreg(vcpu->arch.ctxt.spsr_fiq, spsr_fiq);
+
+	write_sysreg(__vcpu_sys_reg(vcpu, DACR32_EL2), dacr32_el2);
+	write_sysreg(__vcpu_sys_reg(vcpu, IFSR32_EL2), ifsr32_el2);
+
+	if (has_vhe() || vcpu_get_flag(vcpu, DEBUG_DIRTY))
+		write_sysreg(__vcpu_sys_reg(vcpu, DBGVCR32_EL2), dbgvcr32_el2);
+}
+
+#endif /* __ARM64_KVM_HYP_SYSREG_SR_H__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/early_alloc.h b/arch/arm64/kvm/hyp/include/nvhe/early_alloc.h
new file mode 100644
index 000000000..dc61aaa56
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/early_alloc.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __KVM_HYP_EARLY_ALLOC_H
+#define __KVM_HYP_EARLY_ALLOC_H
+
+#include <asm/kvm_pgtable.h>
+
+void hyp_early_alloc_init(void *virt, unsigned long size);
+unsigned long hyp_early_alloc_nr_used_pages(void);
+void *hyp_early_alloc_page(void *arg);
+void *hyp_early_alloc_contig(unsigned int nr_pages);
+
+extern struct kvm_pgtable_mm_ops hyp_early_alloc_mm_ops;
+
+#endif /* __KVM_HYP_EARLY_ALLOC_H */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/ffa.h b/arch/arm64/kvm/hyp/include/nvhe/ffa.h
new file mode 100644
index 000000000..d9fd5e6c7
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/ffa.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 - Google LLC
+ * Author: Andrew Walbran <qwandor@google.com>
+ */
+#ifndef __KVM_HYP_FFA_H
+#define __KVM_HYP_FFA_H
+
+#include <asm/kvm_host.h>
+
+#define FFA_MIN_FUNC_NUM 0x60
+#define FFA_MAX_FUNC_NUM 0x7F
+
+int hyp_ffa_init(void *pages);
+bool kvm_host_ffa_handler(struct kvm_cpu_context *host_ctxt, u32 func_id);
+
+#endif /* __KVM_HYP_FFA_H */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
new file mode 100644
index 000000000..37440e1dd
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Google LLC
+ * Author: Fuad Tabba <tabba@google.com>
+ */
+
+#ifndef __ARM64_KVM_FIXED_CONFIG_H__
+#define __ARM64_KVM_FIXED_CONFIG_H__
+
+#include <asm/sysreg.h>
+
+/*
+ * This file contains definitions for features to be allowed or restricted for
+ * guest virtual machines, depending on the mode KVM is running in and on the
+ * type of guest that is running.
+ *
+ * The ALLOW masks represent a bitmask of feature fields that are allowed
+ * without any restrictions as long as they are supported by the system.
+ *
+ * The RESTRICT_UNSIGNED masks, if present, represent unsigned fields for
+ * features that are restricted to support at most the specified feature.
+ *
+ * If a feature field is not present in either, than it is not supported.
+ *
+ * The approach taken for protected VMs is to allow features that are:
+ * - Needed by common Linux distributions (e.g., floating point)
+ * - Trivial to support, e.g., supporting the feature does not introduce or
+ * require tracking of additional state in KVM
+ * - Cannot be trapped or prevent the guest from using anyway
+ */
+
+/*
+ * Allow for protected VMs:
+ * - Floating-point and Advanced SIMD
+ * - Data Independent Timing
+ * - Spectre/Meltdown Mitigation
+ */
+#define PVM_ID_AA64PFR0_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_DIT) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3) \
+	)
+
+/*
+ * Restrict to the following *unsigned* features for protected VMs:
+ * - AArch64 guests only (no support for AArch32 guests):
+ *	AArch32 adds complexity in trap handling, emulation, condition codes,
+ *	etc...
+ * - RAS (v1)
+ *	Supported by KVM
+ */
+#define PVM_ID_AA64PFR0_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL0), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL2), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL3), ID_AA64PFR0_EL1_ELx_64BIT_ONLY) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_RAS), ID_AA64PFR0_EL1_RAS_IMP) \
+	)
+
+/*
+ * Allow for protected VMs:
+ * - Branch Target Identification
+ * - Speculative Store Bypassing
+ */
+#define PVM_ID_AA64PFR1_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_BT) | \
+	ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SSBS) \
+	)
+
+/*
+ * Allow for protected VMs:
+ * - Mixed-endian
+ * - Distinction between Secure and Non-secure Memory
+ * - Mixed-endian at EL0 only
+ * - Non-context synchronizing exception entry and exit
+ */
+#define PVM_ID_AA64MMFR0_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_BIGEND) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_SNSMEM) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_BIGENDEL0) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_EXS) \
+	)
+
+/*
+ * Restrict to the following *unsigned* features for protected VMs:
+ * - 40-bit IPA
+ * - 16-bit ASID
+ */
+#define PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED (\
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_PARANGE), ID_AA64MMFR0_EL1_PARANGE_40) | \
+	FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_ASIDBITS), ID_AA64MMFR0_EL1_ASIDBITS_16) \
+	)
+
+/*
+ * Allow for protected VMs:
+ * - Hardware translation table updates to Access flag and Dirty state
+ * - Number of VMID bits from CPU
+ * - Hierarchical Permission Disables
+ * - Privileged Access Never
+ * - SError interrupt exceptions from speculative reads
+ * - Enhanced Translation Synchronization
+ */
+#define PVM_ID_AA64MMFR1_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HAFDBS) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_VMIDBits) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_HPDS) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_PAN) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_SpecSEI) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_ETS) \
+	)
+
+/*
+ * Allow for protected VMs:
+ * - Common not Private translations
+ * - User Access Override
+ * - IESB bit in the SCTLR_ELx registers
+ * - Unaligned single-copy atomicity and atomic functions
+ * - ESR_ELx.EC value on an exception by read access to feature ID space
+ * - TTL field in address operations.
+ * - Break-before-make sequences when changing translation block size
+ * - E0PDx mechanism
+ */
+#define PVM_ID_AA64MMFR2_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_CnP) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_UAO) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_IESB) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_AT) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_IDS) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_TTL) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_BBM) | \
+	ARM64_FEATURE_MASK(ID_AA64MMFR2_EL1_E0PD) \
+	)
+
+/*
+ * No support for Scalable Vectors for protected VMs:
+ *	Requires additional support from KVM, e.g., context-switching and
+ *	trapping at EL2
+ */
+#define PVM_ID_AA64ZFR0_ALLOW (0ULL)
+
+/*
+ * No support for debug, including breakpoints, and watchpoints for protected
+ * VMs:
+ *	The Arm architecture mandates support for at least the Armv8 debug
+ *	architecture, which would include at least 2 hardware breakpoints and
+ *	watchpoints. Providing that support to protected guests adds
+ *	considerable state and complexity. Therefore, the reserved value of 0 is
+ *	used for debug-related fields.
+ */
+#define PVM_ID_AA64DFR0_ALLOW (0ULL)
+#define PVM_ID_AA64DFR1_ALLOW (0ULL)
+
+/*
+ * No support for implementation defined features.
+ */
+#define PVM_ID_AA64AFR0_ALLOW (0ULL)
+#define PVM_ID_AA64AFR1_ALLOW (0ULL)
+
+/*
+ * No restrictions on instructions implemented in AArch64.
+ */
+#define PVM_ID_AA64ISAR0_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_AES) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SHA1) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SHA2) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_CRC32) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_ATOMIC) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RDM) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SHA3) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SM3) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_SM4) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_DP) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_FHM) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_TS) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_TLB) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR0_EL1_RNDR) \
+	)
+
+#define PVM_ID_AA64ISAR1_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DPB) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_JSCVT) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FCMA) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_LRCPC) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_FRINTTS) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_SB) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_SPECRES) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_BF16) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_DGH) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_I8MM) \
+	)
+
+#define PVM_ID_AA64ISAR2_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) \
+	)
+
+u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id);
+bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code);
+bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code);
+int kvm_check_pvm_sysreg_table(void);
+
+#endif /* __ARM64_KVM_FIXED_CONFIG_H__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/gfp.h b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
new file mode 100644
index 000000000..fe5472a18
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/gfp.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __KVM_HYP_GFP_H
+#define __KVM_HYP_GFP_H
+
+#include <linux/list.h>
+
+#include <nvhe/memory.h>
+#include <nvhe/spinlock.h>
+
+#define HYP_NO_ORDER	USHRT_MAX
+
+struct hyp_pool {
+	/*
+	 * Spinlock protecting concurrent changes to the memory pool as well as
+	 * the struct hyp_page of the pool's pages until we have a proper atomic
+	 * API at EL2.
+	 */
+	hyp_spinlock_t lock;
+	struct list_head free_area[MAX_ORDER + 1];
+	phys_addr_t range_start;
+	phys_addr_t range_end;
+	unsigned short max_order;
+};
+
+/* Allocation */
+void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order);
+void hyp_split_page(struct hyp_page *page);
+void hyp_get_page(struct hyp_pool *pool, void *addr);
+void hyp_put_page(struct hyp_pool *pool, void *addr);
+
+/* Used pages cannot be freed */
+int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages,
+		  unsigned int reserved_pages);
+#endif /* __KVM_HYP_GFP_H */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
new file mode 100644
index 000000000..0972faccc
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#ifndef __KVM_NVHE_MEM_PROTECT__
+#define __KVM_NVHE_MEM_PROTECT__
+#include <linux/kvm_host.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_pgtable.h>
+#include <asm/virt.h>
+#include <nvhe/pkvm.h>
+#include <nvhe/spinlock.h>
+
+/*
+ * SW bits 0-1 are reserved to track the memory ownership state of each page:
+ *   00: The page is owned exclusively by the page-table owner.
+ *   01: The page is owned by the page-table owner, but is shared
+ *       with another entity.
+ *   10: The page is shared with, but not owned by the page-table owner.
+ *   11: Reserved for future use (lending).
+ */
+enum pkvm_page_state {
+	PKVM_PAGE_OWNED			= 0ULL,
+	PKVM_PAGE_SHARED_OWNED		= KVM_PGTABLE_PROT_SW0,
+	PKVM_PAGE_SHARED_BORROWED	= KVM_PGTABLE_PROT_SW1,
+	__PKVM_PAGE_RESERVED		= KVM_PGTABLE_PROT_SW0 |
+					  KVM_PGTABLE_PROT_SW1,
+
+	/* Meta-states which aren't encoded directly in the PTE's SW bits */
+	PKVM_NOPAGE,
+};
+
+#define PKVM_PAGE_STATE_PROT_MASK	(KVM_PGTABLE_PROT_SW0 | KVM_PGTABLE_PROT_SW1)
+static inline enum kvm_pgtable_prot pkvm_mkstate(enum kvm_pgtable_prot prot,
+						 enum pkvm_page_state state)
+{
+	return (prot & ~PKVM_PAGE_STATE_PROT_MASK) | state;
+}
+
+static inline enum pkvm_page_state pkvm_getstate(enum kvm_pgtable_prot prot)
+{
+	return prot & PKVM_PAGE_STATE_PROT_MASK;
+}
+
+struct host_mmu {
+	struct kvm_arch arch;
+	struct kvm_pgtable pgt;
+	struct kvm_pgtable_mm_ops mm_ops;
+	hyp_spinlock_t lock;
+};
+extern struct host_mmu host_mmu;
+
+/* This corresponds to page-table locking order */
+enum pkvm_component_id {
+	PKVM_ID_HOST,
+	PKVM_ID_HYP,
+	PKVM_ID_FFA,
+};
+
+extern unsigned long hyp_nr_cpus;
+
+int __pkvm_prot_finalize(void);
+int __pkvm_host_share_hyp(u64 pfn);
+int __pkvm_host_unshare_hyp(u64 pfn);
+int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages);
+int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages);
+int __pkvm_host_share_ffa(u64 pfn, u64 nr_pages);
+int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages);
+
+bool addr_is_memory(phys_addr_t phys);
+int host_stage2_idmap_locked(phys_addr_t addr, u64 size, enum kvm_pgtable_prot prot);
+int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id);
+int kvm_host_prepare_stage2(void *pgt_pool_base);
+int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd);
+void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt);
+
+int hyp_pin_shared_mem(void *from, void *to);
+void hyp_unpin_shared_mem(void *from, void *to);
+void reclaim_guest_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc);
+int refill_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages,
+		    struct kvm_hyp_memcache *host_mc);
+
+static __always_inline void __load_host_stage2(void)
+{
+	if (static_branch_likely(&kvm_protected_mode_initialized))
+		__load_stage2(&host_mmu.arch.mmu, &host_mmu.arch);
+	else
+		write_sysreg(0, vttbr_el2);
+}
+#endif /* __KVM_NVHE_MEM_PROTECT__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/memory.h b/arch/arm64/kvm/hyp/include/nvhe/memory.h
new file mode 100644
index 000000000..ab205c4d6
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/memory.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __KVM_HYP_MEMORY_H
+#define __KVM_HYP_MEMORY_H
+
+#include <asm/kvm_mmu.h>
+#include <asm/page.h>
+
+#include <linux/types.h>
+
+struct hyp_page {
+	unsigned short refcount;
+	unsigned short order;
+};
+
+extern u64 __hyp_vmemmap;
+#define hyp_vmemmap ((struct hyp_page *)__hyp_vmemmap)
+
+#define __hyp_va(phys)	((void *)((phys_addr_t)(phys) - hyp_physvirt_offset))
+
+static inline void *hyp_phys_to_virt(phys_addr_t phys)
+{
+	return __hyp_va(phys);
+}
+
+static inline phys_addr_t hyp_virt_to_phys(void *addr)
+{
+	return __hyp_pa(addr);
+}
+
+#define hyp_phys_to_pfn(phys)	((phys) >> PAGE_SHIFT)
+#define hyp_pfn_to_phys(pfn)	((phys_addr_t)((pfn) << PAGE_SHIFT))
+#define hyp_phys_to_page(phys)	(&hyp_vmemmap[hyp_phys_to_pfn(phys)])
+#define hyp_virt_to_page(virt)	hyp_phys_to_page(__hyp_pa(virt))
+#define hyp_virt_to_pfn(virt)	hyp_phys_to_pfn(__hyp_pa(virt))
+
+#define hyp_page_to_pfn(page)	((struct hyp_page *)(page) - hyp_vmemmap)
+#define hyp_page_to_phys(page)  hyp_pfn_to_phys((hyp_page_to_pfn(page)))
+#define hyp_page_to_virt(page)	__hyp_va(hyp_page_to_phys(page))
+#define hyp_page_to_pool(page)	(((struct hyp_page *)page)->pool)
+
+/*
+ * Refcounting for 'struct hyp_page'.
+ * hyp_pool::lock must be held if atomic access to the refcount is required.
+ */
+static inline int hyp_page_count(void *addr)
+{
+	struct hyp_page *p = hyp_virt_to_page(addr);
+
+	return p->refcount;
+}
+
+static inline void hyp_page_ref_inc(struct hyp_page *p)
+{
+	BUG_ON(p->refcount == USHRT_MAX);
+	p->refcount++;
+}
+
+static inline void hyp_page_ref_dec(struct hyp_page *p)
+{
+	BUG_ON(!p->refcount);
+	p->refcount--;
+}
+
+static inline int hyp_page_ref_dec_and_test(struct hyp_page *p)
+{
+	hyp_page_ref_dec(p);
+	return (p->refcount == 0);
+}
+
+static inline void hyp_set_page_refcounted(struct hyp_page *p)
+{
+	BUG_ON(p->refcount);
+	p->refcount = 1;
+}
+#endif /* __KVM_HYP_MEMORY_H */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/mm.h b/arch/arm64/kvm/hyp/include/nvhe/mm.h
new file mode 100644
index 000000000..230e4f252
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/mm.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __KVM_HYP_MM_H
+#define __KVM_HYP_MM_H
+
+#include <asm/kvm_pgtable.h>
+#include <asm/spectre.h>
+#include <linux/memblock.h>
+#include <linux/types.h>
+
+#include <nvhe/memory.h>
+#include <nvhe/spinlock.h>
+
+extern struct kvm_pgtable pkvm_pgtable;
+extern hyp_spinlock_t pkvm_pgd_lock;
+
+int hyp_create_pcpu_fixmap(void);
+void *hyp_fixmap_map(phys_addr_t phys);
+void hyp_fixmap_unmap(void);
+
+int hyp_create_idmap(u32 hyp_va_bits);
+int hyp_map_vectors(void);
+int hyp_back_vmemmap(phys_addr_t back);
+int pkvm_cpu_set_vector(enum arm64_hyp_spectre_vector slot);
+int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot);
+int pkvm_create_mappings_locked(void *from, void *to, enum kvm_pgtable_prot prot);
+int __pkvm_create_private_mapping(phys_addr_t phys, size_t size,
+				  enum kvm_pgtable_prot prot,
+				  unsigned long *haddr);
+int pkvm_create_stack(phys_addr_t phys, unsigned long *haddr);
+int pkvm_alloc_private_va_range(size_t size, unsigned long *haddr);
+
+#endif /* __KVM_HYP_MM_H */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/pkvm.h b/arch/arm64/kvm/hyp/include/nvhe/pkvm.h
new file mode 100644
index 000000000..82b3d6253
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/pkvm.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Google LLC
+ * Author: Fuad Tabba <tabba@google.com>
+ */
+
+#ifndef __ARM64_KVM_NVHE_PKVM_H__
+#define __ARM64_KVM_NVHE_PKVM_H__
+
+#include <asm/kvm_pkvm.h>
+
+#include <nvhe/gfp.h>
+#include <nvhe/spinlock.h>
+
+/*
+ * Holds the relevant data for maintaining the vcpu state completely at hyp.
+ */
+struct pkvm_hyp_vcpu {
+	struct kvm_vcpu vcpu;
+
+	/* Backpointer to the host's (untrusted) vCPU instance. */
+	struct kvm_vcpu *host_vcpu;
+};
+
+/*
+ * Holds the relevant data for running a protected vm.
+ */
+struct pkvm_hyp_vm {
+	struct kvm kvm;
+
+	/* Backpointer to the host's (untrusted) KVM instance. */
+	struct kvm *host_kvm;
+
+	/* The guest's stage-2 page-table managed by the hypervisor. */
+	struct kvm_pgtable pgt;
+	struct kvm_pgtable_mm_ops mm_ops;
+	struct hyp_pool pool;
+	hyp_spinlock_t lock;
+
+	/*
+	 * The number of vcpus initialized and ready to run.
+	 * Modifying this is protected by 'vm_table_lock'.
+	 */
+	unsigned int nr_vcpus;
+
+	/* Array of the hyp vCPU structures for this VM. */
+	struct pkvm_hyp_vcpu *vcpus[];
+};
+
+static inline struct pkvm_hyp_vm *
+pkvm_hyp_vcpu_to_hyp_vm(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	return container_of(hyp_vcpu->vcpu.kvm, struct pkvm_hyp_vm, kvm);
+}
+
+void pkvm_hyp_vm_table_init(void *tbl);
+
+int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
+		   unsigned long pgd_hva);
+int __pkvm_init_vcpu(pkvm_handle_t handle, struct kvm_vcpu *host_vcpu,
+		     unsigned long vcpu_hva);
+int __pkvm_teardown_vm(pkvm_handle_t handle);
+
+struct pkvm_hyp_vcpu *pkvm_load_hyp_vcpu(pkvm_handle_t handle,
+					 unsigned int vcpu_idx);
+void pkvm_put_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu);
+
+#endif /* __ARM64_KVM_NVHE_PKVM_H__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/spinlock.h b/arch/arm64/kvm/hyp/include/nvhe/spinlock.h
new file mode 100644
index 000000000..7c7ea8c55
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/spinlock.h
@@ -0,0 +1,125 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * A stand-alone ticket spinlock implementation for use by the non-VHE
+ * KVM hypervisor code running at EL2.
+ *
+ * Copyright (C) 2020 Google LLC
+ * Author: Will Deacon <will@kernel.org>
+ *
+ * Heavily based on the implementation removed by c11090474d70 which was:
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#ifndef __ARM64_KVM_NVHE_SPINLOCK_H__
+#define __ARM64_KVM_NVHE_SPINLOCK_H__
+
+#include <asm/alternative.h>
+#include <asm/lse.h>
+#include <asm/rwonce.h>
+
+typedef union hyp_spinlock {
+	u32	__val;
+	struct {
+#ifdef __AARCH64EB__
+		u16 next, owner;
+#else
+		u16 owner, next;
+#endif
+	};
+} hyp_spinlock_t;
+
+#define __HYP_SPIN_LOCK_INITIALIZER \
+	{ .__val = 0 }
+
+#define __HYP_SPIN_LOCK_UNLOCKED \
+	((hyp_spinlock_t) __HYP_SPIN_LOCK_INITIALIZER)
+
+#define DEFINE_HYP_SPINLOCK(x)	hyp_spinlock_t x = __HYP_SPIN_LOCK_UNLOCKED
+
+#define hyp_spin_lock_init(l)						\
+do {									\
+	*(l) = __HYP_SPIN_LOCK_UNLOCKED;				\
+} while (0)
+
+static inline void hyp_spin_lock(hyp_spinlock_t *lock)
+{
+	u32 tmp;
+	hyp_spinlock_t lockval, newval;
+
+	asm volatile(
+	/* Atomically increment the next ticket. */
+	ARM64_LSE_ATOMIC_INSN(
+	/* LL/SC */
+"	prfm	pstl1strm, %3\n"
+"1:	ldaxr	%w0, %3\n"
+"	add	%w1, %w0, #(1 << 16)\n"
+"	stxr	%w2, %w1, %3\n"
+"	cbnz	%w2, 1b\n",
+	/* LSE atomics */
+"	mov	%w2, #(1 << 16)\n"
+"	ldadda	%w2, %w0, %3\n"
+	__nops(3))
+
+	/* Did we get the lock? */
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbz	%w1, 3f\n"
+	/*
+	 * No: spin on the owner. Send a local event to avoid missing an
+	 * unlock before the exclusive load.
+	 */
+"	sevl\n"
+"2:	wfe\n"
+"	ldaxrh	%w2, %4\n"
+"	eor	%w1, %w2, %w0, lsr #16\n"
+"	cbnz	%w1, 2b\n"
+	/* We got the lock. Critical section starts here. */
+"3:"
+	: "=&r" (lockval), "=&r" (newval), "=&r" (tmp), "+Q" (*lock)
+	: "Q" (lock->owner)
+	: "memory");
+}
+
+static inline void hyp_spin_unlock(hyp_spinlock_t *lock)
+{
+	u64 tmp;
+
+	asm volatile(
+	ARM64_LSE_ATOMIC_INSN(
+	/* LL/SC */
+	"	ldrh	%w1, %0\n"
+	"	add	%w1, %w1, #1\n"
+	"	stlrh	%w1, %0",
+	/* LSE atomics */
+	"	mov	%w1, #1\n"
+	"	staddlh	%w1, %0\n"
+	__nops(1))
+	: "=Q" (lock->owner), "=&r" (tmp)
+	:
+	: "memory");
+}
+
+static inline bool hyp_spin_is_locked(hyp_spinlock_t *lock)
+{
+	hyp_spinlock_t lockval = READ_ONCE(*lock);
+
+	return lockval.owner != lockval.next;
+}
+
+#ifdef CONFIG_NVHE_EL2_DEBUG
+static inline void hyp_assert_lock_held(hyp_spinlock_t *lock)
+{
+	/*
+	 * The __pkvm_init() path accesses protected data-structures without
+	 * holding locks as the other CPUs are guaranteed to not enter EL2
+	 * concurrently at this point in time. The point by which EL2 is
+	 * initialized on all CPUs is reflected in the pkvm static key, so
+	 * wait until it is set before checking the lock state.
+	 */
+	if (static_branch_likely(&kvm_protected_mode_initialized))
+		BUG_ON(!hyp_spin_is_locked(lock));
+}
+#else
+static inline void hyp_assert_lock_held(hyp_spinlock_t *lock) { }
+#endif
+
+#endif /* __ARM64_KVM_NVHE_SPINLOCK_H__ */
diff --git a/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h b/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h
new file mode 100644
index 000000000..45a84f0ad
--- /dev/null
+++ b/arch/arm64/kvm/hyp/include/nvhe/trap_handler.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Trap handler helpers.
+ *
+ * Copyright (C) 2020 - Google LLC
+ * Author: Marc Zyngier <maz@kernel.org>
+ */
+
+#ifndef __ARM64_KVM_NVHE_TRAP_HANDLER_H__
+#define __ARM64_KVM_NVHE_TRAP_HANDLER_H__
+
+#include <asm/kvm_host.h>
+
+#define cpu_reg(ctxt, r)	(ctxt)->regs.regs[r]
+#define DECLARE_REG(type, name, ctxt, reg)	\
+				type name = (type)cpu_reg(ctxt, (reg))
+
+void __pkvm_vcpu_init_traps(struct kvm_vcpu *vcpu);
+
+#endif /* __ARM64_KVM_NVHE_TRAP_HANDLER_H__ */
diff --git a/arch/arm64/kvm/hyp/nvhe/.gitignore b/arch/arm64/kvm/hyp/nvhe/.gitignore
new file mode 100644
index 000000000..5b6c43cc9
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/.gitignore
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+gen-hyprel
+hyp.lds
+hyp-reloc.S
diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
new file mode 100644
index 000000000..2250253a6
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Kernel-based Virtual Machine module, HYP/nVHE part
+#
+
+asflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS
+
+# Tracepoint and MMIO logging symbols should not be visible at nVHE KVM as
+# there is no way to execute them and any such MMIO access from nVHE KVM
+# will explode instantly (Words of Marc Zyngier). So introduce a generic flag
+# __DISABLE_TRACE_MMIO__ to disable MMIO tracing for nVHE KVM.
+ccflags-y := -D__KVM_NVHE_HYPERVISOR__ -D__DISABLE_EXPORTS -D__DISABLE_TRACE_MMIO__
+ccflags-y += -fno-stack-protector	\
+	     -DDISABLE_BRANCH_PROFILING	\
+	     $(DISABLE_STACKLEAK_PLUGIN)
+
+hostprogs := gen-hyprel
+HOST_EXTRACFLAGS += -I$(objtree)/include
+
+lib-objs := clear_page.o copy_page.o memcpy.o memset.o
+lib-objs := $(addprefix ../../../lib/, $(lib-objs))
+
+hyp-obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o hyp-init.o host.o \
+	 hyp-main.o hyp-smp.o psci-relay.o early_alloc.o page_alloc.o \
+	 cache.o setup.o mm.o mem_protect.o sys_regs.o pkvm.o stacktrace.o ffa.o
+hyp-obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \
+	 ../fpsimd.o ../hyp-entry.o ../exception.o ../pgtable.o
+hyp-obj-$(CONFIG_LIST_HARDENED) += list_debug.o
+hyp-obj-y += $(lib-objs)
+
+##
+## Build rules for compiling nVHE hyp code
+## Output of this folder is `kvm_nvhe.o`, a partially linked object
+## file containing all nVHE hyp code and data.
+##
+
+hyp-obj := $(patsubst %.o,%.nvhe.o,$(hyp-obj-y))
+obj-y := kvm_nvhe.o
+targets += $(hyp-obj) kvm_nvhe.tmp.o kvm_nvhe.rel.o hyp.lds hyp-reloc.S hyp-reloc.o
+
+# 1) Compile all source files to `.nvhe.o` object files. The file extension
+#    avoids file name clashes for files shared with VHE.
+$(obj)/%.nvhe.o: $(src)/%.c FORCE
+	$(call if_changed_rule,cc_o_c)
+$(obj)/%.nvhe.o: $(src)/%.S FORCE
+	$(call if_changed_rule,as_o_S)
+
+# 2) Compile linker script.
+$(obj)/hyp.lds: $(src)/hyp.lds.S FORCE
+	$(call if_changed_dep,cpp_lds_S)
+
+# 3) Partially link all '.nvhe.o' files and apply the linker script.
+#    Prefixes names of ELF sections with '.hyp', eg. '.hyp.text'.
+#    Note: The following rule assumes that the 'ld' rule puts LDFLAGS before
+#          the list of dependencies to form '-T $(obj)/hyp.lds'. This is to
+#          keep the dependency on the target while avoiding an error from
+#          GNU ld if the linker script is passed to it twice.
+LDFLAGS_kvm_nvhe.tmp.o := -r -T
+$(obj)/kvm_nvhe.tmp.o: $(obj)/hyp.lds $(addprefix $(obj)/,$(hyp-obj)) FORCE
+	$(call if_changed,ld)
+
+# 4) Generate list of hyp code/data positions that need to be relocated at
+#    runtime. Because the hypervisor is part of the kernel binary, relocations
+#    produce a kernel VA. We enumerate relocations targeting hyp at build time
+#    and convert the kernel VAs at those positions to hyp VAs.
+$(obj)/hyp-reloc.S: $(obj)/kvm_nvhe.tmp.o $(obj)/gen-hyprel FORCE
+	$(call if_changed,hyprel)
+
+# 5) Compile hyp-reloc.S and link it into the existing partially linked object.
+#    The object file now contains a section with pointers to hyp positions that
+#    will contain kernel VAs at runtime. These pointers have relocations on them
+#    so that they get updated as the hyp object is linked into `vmlinux`.
+LDFLAGS_kvm_nvhe.rel.o := -r
+$(obj)/kvm_nvhe.rel.o: $(obj)/kvm_nvhe.tmp.o $(obj)/hyp-reloc.o FORCE
+	$(call if_changed,ld)
+
+# 6) Produce the final 'kvm_nvhe.o', ready to be linked into 'vmlinux'.
+#    Prefixes names of ELF symbols with '__kvm_nvhe_'.
+$(obj)/kvm_nvhe.o: $(obj)/kvm_nvhe.rel.o FORCE
+	$(call if_changed,hypcopy)
+
+# The HYPREL command calls `gen-hyprel` to generate an assembly file with
+# a list of relocations targeting hyp code/data.
+quiet_cmd_hyprel = HYPREL  $@
+      cmd_hyprel = $(obj)/gen-hyprel $< > $@
+
+# The HYPCOPY command uses `objcopy` to prefix all ELF symbol names
+# to avoid clashes with VHE code/data.
+quiet_cmd_hypcopy = HYPCOPY $@
+      cmd_hypcopy = $(OBJCOPY) --prefix-symbols=__kvm_nvhe_ $< $@
+
+# Remove ftrace, Shadow Call Stack, and CFI CFLAGS.
+# This is equivalent to the 'notrace', '__noscs', and '__nocfi' annotations.
+KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_FTRACE) $(CC_FLAGS_SCS) $(CC_FLAGS_CFI), $(KBUILD_CFLAGS))
+# Starting from 13.0.0 llvm emits SHT_REL section '.llvm.call-graph-profile'
+# when profile optimization is applied. gen-hyprel does not support SHT_REL and
+# causes a build failure. Remove profile optimization flags.
+KBUILD_CFLAGS := $(filter-out -fprofile-sample-use=% -fprofile-use=%, $(KBUILD_CFLAGS))
+KBUILD_CFLAGS += -fno-asynchronous-unwind-tables -fno-unwind-tables
+
+# KVM nVHE code is run at a different exception code with a different map, so
+# compiler instrumentation that inserts callbacks or checks into the code may
+# cause crashes. Just disable it.
+GCOV_PROFILE	:= n
+KASAN_SANITIZE	:= n
+KCSAN_SANITIZE	:= n
+UBSAN_SANITIZE	:= n
+KCOV_INSTRUMENT	:= n
+
+# Skip objtool checking for this directory because nVHE code is compiled with
+# non-standard build rules.
+OBJECT_FILES_NON_STANDARD := y
diff --git a/arch/arm64/kvm/hyp/nvhe/cache.S b/arch/arm64/kvm/hyp/nvhe/cache.S
new file mode 100644
index 000000000..85936c17a
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/cache.S
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Code copied from arch/arm64/mm/cache.S.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/alternative.h>
+
+SYM_FUNC_START(__pi_dcache_clean_inval_poc)
+	dcache_by_line_op civac, sy, x0, x1, x2, x3
+	ret
+SYM_FUNC_END(__pi_dcache_clean_inval_poc)
+SYM_FUNC_ALIAS(dcache_clean_inval_poc, __pi_dcache_clean_inval_poc)
+
+SYM_FUNC_START(__pi_icache_inval_pou)
+alternative_if ARM64_HAS_CACHE_DIC
+	isb
+	ret
+alternative_else_nop_endif
+
+	invalidate_icache_by_line x0, x1, x2, x3
+	ret
+SYM_FUNC_END(__pi_icache_inval_pou)
+SYM_FUNC_ALIAS(icache_inval_pou, __pi_icache_inval_pou)
diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
new file mode 100644
index 000000000..4558c02eb
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/debug-sr.h>
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+static void __debug_save_spe(u64 *pmscr_el1)
+{
+	u64 reg;
+
+	/* Clear pmscr in case of early return */
+	*pmscr_el1 = 0;
+
+	/*
+	 * At this point, we know that this CPU implements
+	 * SPE and is available to the host.
+	 * Check if the host is actually using it ?
+	 */
+	reg = read_sysreg_s(SYS_PMBLIMITR_EL1);
+	if (!(reg & BIT(PMBLIMITR_EL1_E_SHIFT)))
+		return;
+
+	/* Yes; save the control register and disable data generation */
+	*pmscr_el1 = read_sysreg_s(SYS_PMSCR_EL1);
+	write_sysreg_s(0, SYS_PMSCR_EL1);
+	isb();
+
+	/* Now drain all buffered data to memory */
+	psb_csync();
+}
+
+static void __debug_restore_spe(u64 pmscr_el1)
+{
+	if (!pmscr_el1)
+		return;
+
+	/* The host page table is installed, but not yet synchronised */
+	isb();
+
+	/* Re-enable data generation */
+	write_sysreg_s(pmscr_el1, SYS_PMSCR_EL1);
+}
+
+static void __debug_save_trace(u64 *trfcr_el1)
+{
+	*trfcr_el1 = 0;
+
+	/* Check if the TRBE is enabled */
+	if (!(read_sysreg_s(SYS_TRBLIMITR_EL1) & TRBLIMITR_EL1_E))
+		return;
+	/*
+	 * Prohibit trace generation while we are in guest.
+	 * Since access to TRFCR_EL1 is trapped, the guest can't
+	 * modify the filtering set by the host.
+	 */
+	*trfcr_el1 = read_sysreg_s(SYS_TRFCR_EL1);
+	write_sysreg_s(0, SYS_TRFCR_EL1);
+	isb();
+	/* Drain the trace buffer to memory */
+	tsb_csync();
+}
+
+static void __debug_restore_trace(u64 trfcr_el1)
+{
+	if (!trfcr_el1)
+		return;
+
+	/* Restore trace filter controls */
+	write_sysreg_s(trfcr_el1, SYS_TRFCR_EL1);
+}
+
+void __debug_save_host_buffers_nvhe(struct kvm_vcpu *vcpu)
+{
+	/* Disable and flush SPE data generation */
+	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_SPE))
+		__debug_save_spe(&vcpu->arch.host_debug_state.pmscr_el1);
+	/* Disable and flush Self-Hosted Trace generation */
+	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE))
+		__debug_save_trace(&vcpu->arch.host_debug_state.trfcr_el1);
+}
+
+void __debug_switch_to_guest(struct kvm_vcpu *vcpu)
+{
+	__debug_switch_to_guest_common(vcpu);
+}
+
+void __debug_restore_host_buffers_nvhe(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_SPE))
+		__debug_restore_spe(vcpu->arch.host_debug_state.pmscr_el1);
+	if (vcpu_get_flag(vcpu, DEBUG_STATE_SAVE_TRBE))
+		__debug_restore_trace(vcpu->arch.host_debug_state.trfcr_el1);
+}
+
+void __debug_switch_to_host(struct kvm_vcpu *vcpu)
+{
+	__debug_switch_to_host_common(vcpu);
+}
+
+u64 __kvm_get_mdcr_el2(void)
+{
+	return read_sysreg(mdcr_el2);
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/early_alloc.c b/arch/arm64/kvm/hyp/nvhe/early_alloc.c
new file mode 100644
index 000000000..00de04153
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/early_alloc.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#include <asm/kvm_pgtable.h>
+
+#include <nvhe/early_alloc.h>
+#include <nvhe/memory.h>
+
+struct kvm_pgtable_mm_ops hyp_early_alloc_mm_ops;
+s64 __ro_after_init hyp_physvirt_offset;
+
+static unsigned long base;
+static unsigned long end;
+static unsigned long cur;
+
+unsigned long hyp_early_alloc_nr_used_pages(void)
+{
+	return (cur - base) >> PAGE_SHIFT;
+}
+
+void *hyp_early_alloc_contig(unsigned int nr_pages)
+{
+	unsigned long size = (nr_pages << PAGE_SHIFT);
+	void *ret = (void *)cur;
+
+	if (!nr_pages)
+		return NULL;
+
+	if (end - cur < size)
+		return NULL;
+
+	cur += size;
+	memset(ret, 0, size);
+
+	return ret;
+}
+
+void *hyp_early_alloc_page(void *arg)
+{
+	return hyp_early_alloc_contig(1);
+}
+
+static void hyp_early_alloc_get_page(void *addr) { }
+static void hyp_early_alloc_put_page(void *addr) { }
+
+void hyp_early_alloc_init(void *virt, unsigned long size)
+{
+	base = cur = (unsigned long)virt;
+	end = base + size;
+
+	hyp_early_alloc_mm_ops.zalloc_page = hyp_early_alloc_page;
+	hyp_early_alloc_mm_ops.phys_to_virt = hyp_phys_to_virt;
+	hyp_early_alloc_mm_ops.virt_to_phys = hyp_virt_to_phys;
+	hyp_early_alloc_mm_ops.get_page = hyp_early_alloc_get_page;
+	hyp_early_alloc_mm_ops.put_page = hyp_early_alloc_put_page;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/ffa.c b/arch/arm64/kvm/hyp/nvhe/ffa.c
new file mode 100644
index 000000000..6e4dba9ea
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/ffa.c
@@ -0,0 +1,774 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * FF-A v1.0 proxy to filter out invalid memory-sharing SMC calls issued by
+ * the host. FF-A is a slightly more palatable abbreviation of "Arm Firmware
+ * Framework for Arm A-profile", which is specified by Arm in document
+ * number DEN0077.
+ *
+ * Copyright (C) 2022 - Google LLC
+ * Author: Andrew Walbran <qwandor@google.com>
+ *
+ * This driver hooks into the SMC trapping logic for the host and intercepts
+ * all calls falling within the FF-A range. Each call is either:
+ *
+ *	- Forwarded on unmodified to the SPMD at EL3
+ *	- Rejected as "unsupported"
+ *	- Accompanied by a host stage-2 page-table check/update and reissued
+ *
+ * Consequently, any attempts by the host to make guest memory pages
+ * accessible to the secure world using FF-A will be detected either here
+ * (in the case that the memory is already owned by the guest) or during
+ * donation to the guest (in the case that the memory was previously shared
+ * with the secure world).
+ *
+ * To allow the rolling-back of page-table updates and FF-A calls in the
+ * event of failure, operations involving the RXTX buffers are locked for
+ * the duration and are therefore serialised.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/arm_ffa.h>
+#include <asm/kvm_pkvm.h>
+
+#include <nvhe/ffa.h>
+#include <nvhe/mem_protect.h>
+#include <nvhe/memory.h>
+#include <nvhe/trap_handler.h>
+#include <nvhe/spinlock.h>
+
+/*
+ * "ID value 0 must be returned at the Non-secure physical FF-A instance"
+ * We share this ID with the host.
+ */
+#define HOST_FFA_ID	0
+
+/*
+ * A buffer to hold the maximum descriptor size we can see from the host,
+ * which is required when the SPMD returns a fragmented FFA_MEM_RETRIEVE_RESP
+ * when resolving the handle on the reclaim path.
+ */
+struct kvm_ffa_descriptor_buffer {
+	void	*buf;
+	size_t	len;
+};
+
+static struct kvm_ffa_descriptor_buffer ffa_desc_buf;
+
+struct kvm_ffa_buffers {
+	hyp_spinlock_t lock;
+	void *tx;
+	void *rx;
+};
+
+/*
+ * Note that we don't currently lock these buffers explicitly, instead
+ * relying on the locking of the host FFA buffers as we only have one
+ * client.
+ */
+static struct kvm_ffa_buffers hyp_buffers;
+static struct kvm_ffa_buffers host_buffers;
+
+static void ffa_to_smccc_error(struct arm_smccc_res *res, u64 ffa_errno)
+{
+	*res = (struct arm_smccc_res) {
+		.a0	= FFA_ERROR,
+		.a2	= ffa_errno,
+	};
+}
+
+static void ffa_to_smccc_res_prop(struct arm_smccc_res *res, int ret, u64 prop)
+{
+	if (ret == FFA_RET_SUCCESS) {
+		*res = (struct arm_smccc_res) { .a0 = FFA_SUCCESS,
+						.a2 = prop };
+	} else {
+		ffa_to_smccc_error(res, ret);
+	}
+}
+
+static void ffa_to_smccc_res(struct arm_smccc_res *res, int ret)
+{
+	ffa_to_smccc_res_prop(res, ret, 0);
+}
+
+static void ffa_set_retval(struct kvm_cpu_context *ctxt,
+			   struct arm_smccc_res *res)
+{
+	cpu_reg(ctxt, 0) = res->a0;
+	cpu_reg(ctxt, 1) = res->a1;
+	cpu_reg(ctxt, 2) = res->a2;
+	cpu_reg(ctxt, 3) = res->a3;
+}
+
+static bool is_ffa_call(u64 func_id)
+{
+	return ARM_SMCCC_IS_FAST_CALL(func_id) &&
+	       ARM_SMCCC_OWNER_NUM(func_id) == ARM_SMCCC_OWNER_STANDARD &&
+	       ARM_SMCCC_FUNC_NUM(func_id) >= FFA_MIN_FUNC_NUM &&
+	       ARM_SMCCC_FUNC_NUM(func_id) <= FFA_MAX_FUNC_NUM;
+}
+
+static int ffa_map_hyp_buffers(u64 ffa_page_count)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_smc(FFA_FN64_RXTX_MAP,
+			  hyp_virt_to_phys(hyp_buffers.tx),
+			  hyp_virt_to_phys(hyp_buffers.rx),
+			  ffa_page_count,
+			  0, 0, 0, 0,
+			  &res);
+
+	return res.a0 == FFA_SUCCESS ? FFA_RET_SUCCESS : res.a2;
+}
+
+static int ffa_unmap_hyp_buffers(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_smc(FFA_RXTX_UNMAP,
+			  HOST_FFA_ID,
+			  0, 0, 0, 0, 0, 0,
+			  &res);
+
+	return res.a0 == FFA_SUCCESS ? FFA_RET_SUCCESS : res.a2;
+}
+
+static void ffa_mem_frag_tx(struct arm_smccc_res *res, u32 handle_lo,
+			     u32 handle_hi, u32 fraglen, u32 endpoint_id)
+{
+	arm_smccc_1_1_smc(FFA_MEM_FRAG_TX,
+			  handle_lo, handle_hi, fraglen, endpoint_id,
+			  0, 0, 0,
+			  res);
+}
+
+static void ffa_mem_frag_rx(struct arm_smccc_res *res, u32 handle_lo,
+			     u32 handle_hi, u32 fragoff)
+{
+	arm_smccc_1_1_smc(FFA_MEM_FRAG_RX,
+			  handle_lo, handle_hi, fragoff, HOST_FFA_ID,
+			  0, 0, 0,
+			  res);
+}
+
+static void ffa_mem_xfer(struct arm_smccc_res *res, u64 func_id, u32 len,
+			  u32 fraglen)
+{
+	arm_smccc_1_1_smc(func_id, len, fraglen,
+			  0, 0, 0, 0, 0,
+			  res);
+}
+
+static void ffa_mem_reclaim(struct arm_smccc_res *res, u32 handle_lo,
+			     u32 handle_hi, u32 flags)
+{
+	arm_smccc_1_1_smc(FFA_MEM_RECLAIM,
+			  handle_lo, handle_hi, flags,
+			  0, 0, 0, 0,
+			  res);
+}
+
+static void ffa_retrieve_req(struct arm_smccc_res *res, u32 len)
+{
+	arm_smccc_1_1_smc(FFA_FN64_MEM_RETRIEVE_REQ,
+			  len, len,
+			  0, 0, 0, 0, 0,
+			  res);
+}
+
+static void do_ffa_rxtx_map(struct arm_smccc_res *res,
+			    struct kvm_cpu_context *ctxt)
+{
+	DECLARE_REG(phys_addr_t, tx, ctxt, 1);
+	DECLARE_REG(phys_addr_t, rx, ctxt, 2);
+	DECLARE_REG(u32, npages, ctxt, 3);
+	int ret = 0;
+	void *rx_virt, *tx_virt;
+
+	if (npages != (KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE) / FFA_PAGE_SIZE) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out;
+	}
+
+	if (!PAGE_ALIGNED(tx) || !PAGE_ALIGNED(rx)) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out;
+	}
+
+	hyp_spin_lock(&host_buffers.lock);
+	if (host_buffers.tx) {
+		ret = FFA_RET_DENIED;
+		goto out_unlock;
+	}
+
+	/*
+	 * Map our hypervisor buffers into the SPMD before mapping and
+	 * pinning the host buffers in our own address space.
+	 */
+	ret = ffa_map_hyp_buffers(npages);
+	if (ret)
+		goto out_unlock;
+
+	ret = __pkvm_host_share_hyp(hyp_phys_to_pfn(tx));
+	if (ret) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto err_unmap;
+	}
+
+	ret = __pkvm_host_share_hyp(hyp_phys_to_pfn(rx));
+	if (ret) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto err_unshare_tx;
+	}
+
+	tx_virt = hyp_phys_to_virt(tx);
+	ret = hyp_pin_shared_mem(tx_virt, tx_virt + 1);
+	if (ret) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto err_unshare_rx;
+	}
+
+	rx_virt = hyp_phys_to_virt(rx);
+	ret = hyp_pin_shared_mem(rx_virt, rx_virt + 1);
+	if (ret) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto err_unpin_tx;
+	}
+
+	host_buffers.tx = tx_virt;
+	host_buffers.rx = rx_virt;
+
+out_unlock:
+	hyp_spin_unlock(&host_buffers.lock);
+out:
+	ffa_to_smccc_res(res, ret);
+	return;
+
+err_unpin_tx:
+	hyp_unpin_shared_mem(tx_virt, tx_virt + 1);
+err_unshare_rx:
+	__pkvm_host_unshare_hyp(hyp_phys_to_pfn(rx));
+err_unshare_tx:
+	__pkvm_host_unshare_hyp(hyp_phys_to_pfn(tx));
+err_unmap:
+	ffa_unmap_hyp_buffers();
+	goto out_unlock;
+}
+
+static void do_ffa_rxtx_unmap(struct arm_smccc_res *res,
+			      struct kvm_cpu_context *ctxt)
+{
+	DECLARE_REG(u32, id, ctxt, 1);
+	int ret = 0;
+
+	if (id != HOST_FFA_ID) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out;
+	}
+
+	hyp_spin_lock(&host_buffers.lock);
+	if (!host_buffers.tx) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out_unlock;
+	}
+
+	hyp_unpin_shared_mem(host_buffers.tx, host_buffers.tx + 1);
+	WARN_ON(__pkvm_host_unshare_hyp(hyp_virt_to_pfn(host_buffers.tx)));
+	host_buffers.tx = NULL;
+
+	hyp_unpin_shared_mem(host_buffers.rx, host_buffers.rx + 1);
+	WARN_ON(__pkvm_host_unshare_hyp(hyp_virt_to_pfn(host_buffers.rx)));
+	host_buffers.rx = NULL;
+
+	ffa_unmap_hyp_buffers();
+
+out_unlock:
+	hyp_spin_unlock(&host_buffers.lock);
+out:
+	ffa_to_smccc_res(res, ret);
+}
+
+static u32 __ffa_host_share_ranges(struct ffa_mem_region_addr_range *ranges,
+				   u32 nranges)
+{
+	u32 i;
+
+	for (i = 0; i < nranges; ++i) {
+		struct ffa_mem_region_addr_range *range = &ranges[i];
+		u64 sz = (u64)range->pg_cnt * FFA_PAGE_SIZE;
+		u64 pfn = hyp_phys_to_pfn(range->address);
+
+		if (!PAGE_ALIGNED(sz))
+			break;
+
+		if (__pkvm_host_share_ffa(pfn, sz / PAGE_SIZE))
+			break;
+	}
+
+	return i;
+}
+
+static u32 __ffa_host_unshare_ranges(struct ffa_mem_region_addr_range *ranges,
+				     u32 nranges)
+{
+	u32 i;
+
+	for (i = 0; i < nranges; ++i) {
+		struct ffa_mem_region_addr_range *range = &ranges[i];
+		u64 sz = (u64)range->pg_cnt * FFA_PAGE_SIZE;
+		u64 pfn = hyp_phys_to_pfn(range->address);
+
+		if (!PAGE_ALIGNED(sz))
+			break;
+
+		if (__pkvm_host_unshare_ffa(pfn, sz / PAGE_SIZE))
+			break;
+	}
+
+	return i;
+}
+
+static int ffa_host_share_ranges(struct ffa_mem_region_addr_range *ranges,
+				 u32 nranges)
+{
+	u32 nshared = __ffa_host_share_ranges(ranges, nranges);
+	int ret = 0;
+
+	if (nshared != nranges) {
+		WARN_ON(__ffa_host_unshare_ranges(ranges, nshared) != nshared);
+		ret = FFA_RET_DENIED;
+	}
+
+	return ret;
+}
+
+static int ffa_host_unshare_ranges(struct ffa_mem_region_addr_range *ranges,
+				   u32 nranges)
+{
+	u32 nunshared = __ffa_host_unshare_ranges(ranges, nranges);
+	int ret = 0;
+
+	if (nunshared != nranges) {
+		WARN_ON(__ffa_host_share_ranges(ranges, nunshared) != nunshared);
+		ret = FFA_RET_DENIED;
+	}
+
+	return ret;
+}
+
+static void do_ffa_mem_frag_tx(struct arm_smccc_res *res,
+			       struct kvm_cpu_context *ctxt)
+{
+	DECLARE_REG(u32, handle_lo, ctxt, 1);
+	DECLARE_REG(u32, handle_hi, ctxt, 2);
+	DECLARE_REG(u32, fraglen, ctxt, 3);
+	DECLARE_REG(u32, endpoint_id, ctxt, 4);
+	struct ffa_mem_region_addr_range *buf;
+	int ret = FFA_RET_INVALID_PARAMETERS;
+	u32 nr_ranges;
+
+	if (fraglen > KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE)
+		goto out;
+
+	if (fraglen % sizeof(*buf))
+		goto out;
+
+	hyp_spin_lock(&host_buffers.lock);
+	if (!host_buffers.tx)
+		goto out_unlock;
+
+	buf = hyp_buffers.tx;
+	memcpy(buf, host_buffers.tx, fraglen);
+	nr_ranges = fraglen / sizeof(*buf);
+
+	ret = ffa_host_share_ranges(buf, nr_ranges);
+	if (ret) {
+		/*
+		 * We're effectively aborting the transaction, so we need
+		 * to restore the global state back to what it was prior to
+		 * transmission of the first fragment.
+		 */
+		ffa_mem_reclaim(res, handle_lo, handle_hi, 0);
+		WARN_ON(res->a0 != FFA_SUCCESS);
+		goto out_unlock;
+	}
+
+	ffa_mem_frag_tx(res, handle_lo, handle_hi, fraglen, endpoint_id);
+	if (res->a0 != FFA_SUCCESS && res->a0 != FFA_MEM_FRAG_RX)
+		WARN_ON(ffa_host_unshare_ranges(buf, nr_ranges));
+
+out_unlock:
+	hyp_spin_unlock(&host_buffers.lock);
+out:
+	if (ret)
+		ffa_to_smccc_res(res, ret);
+
+	/*
+	 * If for any reason this did not succeed, we're in trouble as we have
+	 * now lost the content of the previous fragments and we can't rollback
+	 * the host stage-2 changes. The pages previously marked as shared will
+	 * remain stuck in that state forever, hence preventing the host from
+	 * sharing/donating them again and may possibly lead to subsequent
+	 * failures, but this will not compromise confidentiality.
+	 */
+	return;
+}
+
+static __always_inline void do_ffa_mem_xfer(const u64 func_id,
+					    struct arm_smccc_res *res,
+					    struct kvm_cpu_context *ctxt)
+{
+	DECLARE_REG(u32, len, ctxt, 1);
+	DECLARE_REG(u32, fraglen, ctxt, 2);
+	DECLARE_REG(u64, addr_mbz, ctxt, 3);
+	DECLARE_REG(u32, npages_mbz, ctxt, 4);
+	struct ffa_composite_mem_region *reg;
+	struct ffa_mem_region *buf;
+	u32 offset, nr_ranges;
+	int ret = 0;
+
+	BUILD_BUG_ON(func_id != FFA_FN64_MEM_SHARE &&
+		     func_id != FFA_FN64_MEM_LEND);
+
+	if (addr_mbz || npages_mbz || fraglen > len ||
+	    fraglen > KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out;
+	}
+
+	if (fraglen < sizeof(struct ffa_mem_region) +
+		      sizeof(struct ffa_mem_region_attributes)) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out;
+	}
+
+	hyp_spin_lock(&host_buffers.lock);
+	if (!host_buffers.tx) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out_unlock;
+	}
+
+	buf = hyp_buffers.tx;
+	memcpy(buf, host_buffers.tx, fraglen);
+
+	offset = buf->ep_mem_access[0].composite_off;
+	if (!offset || buf->ep_count != 1 || buf->sender_id != HOST_FFA_ID) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out_unlock;
+	}
+
+	if (fraglen < offset + sizeof(struct ffa_composite_mem_region)) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out_unlock;
+	}
+
+	reg = (void *)buf + offset;
+	nr_ranges = ((void *)buf + fraglen) - (void *)reg->constituents;
+	if (nr_ranges % sizeof(reg->constituents[0])) {
+		ret = FFA_RET_INVALID_PARAMETERS;
+		goto out_unlock;
+	}
+
+	nr_ranges /= sizeof(reg->constituents[0]);
+	ret = ffa_host_share_ranges(reg->constituents, nr_ranges);
+	if (ret)
+		goto out_unlock;
+
+	ffa_mem_xfer(res, func_id, len, fraglen);
+	if (fraglen != len) {
+		if (res->a0 != FFA_MEM_FRAG_RX)
+			goto err_unshare;
+
+		if (res->a3 != fraglen)
+			goto err_unshare;
+	} else if (res->a0 != FFA_SUCCESS) {
+		goto err_unshare;
+	}
+
+out_unlock:
+	hyp_spin_unlock(&host_buffers.lock);
+out:
+	if (ret)
+		ffa_to_smccc_res(res, ret);
+	return;
+
+err_unshare:
+	WARN_ON(ffa_host_unshare_ranges(reg->constituents, nr_ranges));
+	goto out_unlock;
+}
+
+static void do_ffa_mem_reclaim(struct arm_smccc_res *res,
+			       struct kvm_cpu_context *ctxt)
+{
+	DECLARE_REG(u32, handle_lo, ctxt, 1);
+	DECLARE_REG(u32, handle_hi, ctxt, 2);
+	DECLARE_REG(u32, flags, ctxt, 3);
+	struct ffa_composite_mem_region *reg;
+	u32 offset, len, fraglen, fragoff;
+	struct ffa_mem_region *buf;
+	int ret = 0;
+	u64 handle;
+
+	handle = PACK_HANDLE(handle_lo, handle_hi);
+
+	hyp_spin_lock(&host_buffers.lock);
+
+	buf = hyp_buffers.tx;
+	*buf = (struct ffa_mem_region) {
+		.sender_id	= HOST_FFA_ID,
+		.handle		= handle,
+	};
+
+	ffa_retrieve_req(res, sizeof(*buf));
+	buf = hyp_buffers.rx;
+	if (res->a0 != FFA_MEM_RETRIEVE_RESP)
+		goto out_unlock;
+
+	len = res->a1;
+	fraglen = res->a2;
+
+	offset = buf->ep_mem_access[0].composite_off;
+	/*
+	 * We can trust the SPMD to get this right, but let's at least
+	 * check that we end up with something that doesn't look _completely_
+	 * bogus.
+	 */
+	if (WARN_ON(offset > len ||
+		    fraglen > KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE)) {
+		ret = FFA_RET_ABORTED;
+		goto out_unlock;
+	}
+
+	if (len > ffa_desc_buf.len) {
+		ret = FFA_RET_NO_MEMORY;
+		goto out_unlock;
+	}
+
+	buf = ffa_desc_buf.buf;
+	memcpy(buf, hyp_buffers.rx, fraglen);
+
+	for (fragoff = fraglen; fragoff < len; fragoff += fraglen) {
+		ffa_mem_frag_rx(res, handle_lo, handle_hi, fragoff);
+		if (res->a0 != FFA_MEM_FRAG_TX) {
+			ret = FFA_RET_INVALID_PARAMETERS;
+			goto out_unlock;
+		}
+
+		fraglen = res->a3;
+		memcpy((void *)buf + fragoff, hyp_buffers.rx, fraglen);
+	}
+
+	ffa_mem_reclaim(res, handle_lo, handle_hi, flags);
+	if (res->a0 != FFA_SUCCESS)
+		goto out_unlock;
+
+	reg = (void *)buf + offset;
+	/* If the SPMD was happy, then we should be too. */
+	WARN_ON(ffa_host_unshare_ranges(reg->constituents,
+					reg->addr_range_cnt));
+out_unlock:
+	hyp_spin_unlock(&host_buffers.lock);
+
+	if (ret)
+		ffa_to_smccc_res(res, ret);
+}
+
+/*
+ * Is a given FFA function supported, either by forwarding on directly
+ * or by handling at EL2?
+ */
+static bool ffa_call_supported(u64 func_id)
+{
+	switch (func_id) {
+	/* Unsupported memory management calls */
+	case FFA_FN64_MEM_RETRIEVE_REQ:
+	case FFA_MEM_RETRIEVE_RESP:
+	case FFA_MEM_RELINQUISH:
+	case FFA_MEM_OP_PAUSE:
+	case FFA_MEM_OP_RESUME:
+	case FFA_MEM_FRAG_RX:
+	case FFA_FN64_MEM_DONATE:
+	/* Indirect message passing via RX/TX buffers */
+	case FFA_MSG_SEND:
+	case FFA_MSG_POLL:
+	case FFA_MSG_WAIT:
+	/* 32-bit variants of 64-bit calls */
+	case FFA_MSG_SEND_DIRECT_REQ:
+	case FFA_MSG_SEND_DIRECT_RESP:
+	case FFA_RXTX_MAP:
+	case FFA_MEM_DONATE:
+	case FFA_MEM_RETRIEVE_REQ:
+		return false;
+	}
+
+	return true;
+}
+
+static bool do_ffa_features(struct arm_smccc_res *res,
+			    struct kvm_cpu_context *ctxt)
+{
+	DECLARE_REG(u32, id, ctxt, 1);
+	u64 prop = 0;
+	int ret = 0;
+
+	if (!ffa_call_supported(id)) {
+		ret = FFA_RET_NOT_SUPPORTED;
+		goto out_handled;
+	}
+
+	switch (id) {
+	case FFA_MEM_SHARE:
+	case FFA_FN64_MEM_SHARE:
+	case FFA_MEM_LEND:
+	case FFA_FN64_MEM_LEND:
+		ret = FFA_RET_SUCCESS;
+		prop = 0; /* No support for dynamic buffers */
+		goto out_handled;
+	default:
+		return false;
+	}
+
+out_handled:
+	ffa_to_smccc_res_prop(res, ret, prop);
+	return true;
+}
+
+bool kvm_host_ffa_handler(struct kvm_cpu_context *host_ctxt, u32 func_id)
+{
+	struct arm_smccc_res res;
+
+	/*
+	 * There's no way we can tell what a non-standard SMC call might
+	 * be up to. Ideally, we would terminate these here and return
+	 * an error to the host, but sadly devices make use of custom
+	 * firmware calls for things like power management, debugging,
+	 * RNG access and crash reporting.
+	 *
+	 * Given that the architecture requires us to trust EL3 anyway,
+	 * we forward unrecognised calls on under the assumption that
+	 * the firmware doesn't expose a mechanism to access arbitrary
+	 * non-secure memory. Short of a per-device table of SMCs, this
+	 * is the best we can do.
+	 */
+	if (!is_ffa_call(func_id))
+		return false;
+
+	switch (func_id) {
+	case FFA_FEATURES:
+		if (!do_ffa_features(&res, host_ctxt))
+			return false;
+		goto out_handled;
+	/* Memory management */
+	case FFA_FN64_RXTX_MAP:
+		do_ffa_rxtx_map(&res, host_ctxt);
+		goto out_handled;
+	case FFA_RXTX_UNMAP:
+		do_ffa_rxtx_unmap(&res, host_ctxt);
+		goto out_handled;
+	case FFA_MEM_SHARE:
+	case FFA_FN64_MEM_SHARE:
+		do_ffa_mem_xfer(FFA_FN64_MEM_SHARE, &res, host_ctxt);
+		goto out_handled;
+	case FFA_MEM_RECLAIM:
+		do_ffa_mem_reclaim(&res, host_ctxt);
+		goto out_handled;
+	case FFA_MEM_LEND:
+	case FFA_FN64_MEM_LEND:
+		do_ffa_mem_xfer(FFA_FN64_MEM_LEND, &res, host_ctxt);
+		goto out_handled;
+	case FFA_MEM_FRAG_TX:
+		do_ffa_mem_frag_tx(&res, host_ctxt);
+		goto out_handled;
+	}
+
+	if (ffa_call_supported(func_id))
+		return false; /* Pass through */
+
+	ffa_to_smccc_error(&res, FFA_RET_NOT_SUPPORTED);
+out_handled:
+	ffa_set_retval(host_ctxt, &res);
+	return true;
+}
+
+int hyp_ffa_init(void *pages)
+{
+	struct arm_smccc_res res;
+	size_t min_rxtx_sz;
+	void *tx, *rx;
+
+	if (kvm_host_psci_config.smccc_version < ARM_SMCCC_VERSION_1_2)
+		return 0;
+
+	arm_smccc_1_1_smc(FFA_VERSION, FFA_VERSION_1_0, 0, 0, 0, 0, 0, 0, &res);
+	if (res.a0 == FFA_RET_NOT_SUPPORTED)
+		return 0;
+
+	/*
+	 * Firmware returns the maximum supported version of the FF-A
+	 * implementation. Check that the returned version is
+	 * backwards-compatible with the hyp according to the rules in DEN0077A
+	 * v1.1 REL0 13.2.1.
+	 *
+	 * Of course, things are never simple when dealing with firmware. v1.1
+	 * broke ABI with v1.0 on several structures, which is itself
+	 * incompatible with the aforementioned versioning scheme. The
+	 * expectation is that v1.x implementations that do not support the v1.0
+	 * ABI return NOT_SUPPORTED rather than a version number, according to
+	 * DEN0077A v1.1 REL0 18.6.4.
+	 */
+	if (FFA_MAJOR_VERSION(res.a0) != 1)
+		return -EOPNOTSUPP;
+
+	arm_smccc_1_1_smc(FFA_ID_GET, 0, 0, 0, 0, 0, 0, 0, &res);
+	if (res.a0 != FFA_SUCCESS)
+		return -EOPNOTSUPP;
+
+	if (res.a2 != HOST_FFA_ID)
+		return -EINVAL;
+
+	arm_smccc_1_1_smc(FFA_FEATURES, FFA_FN64_RXTX_MAP,
+			  0, 0, 0, 0, 0, 0, &res);
+	if (res.a0 != FFA_SUCCESS)
+		return -EOPNOTSUPP;
+
+	switch (res.a2) {
+	case FFA_FEAT_RXTX_MIN_SZ_4K:
+		min_rxtx_sz = SZ_4K;
+		break;
+	case FFA_FEAT_RXTX_MIN_SZ_16K:
+		min_rxtx_sz = SZ_16K;
+		break;
+	case FFA_FEAT_RXTX_MIN_SZ_64K:
+		min_rxtx_sz = SZ_64K;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (min_rxtx_sz > PAGE_SIZE)
+		return -EOPNOTSUPP;
+
+	tx = pages;
+	pages += KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE;
+	rx = pages;
+	pages += KVM_FFA_MBOX_NR_PAGES * PAGE_SIZE;
+
+	ffa_desc_buf = (struct kvm_ffa_descriptor_buffer) {
+		.buf	= pages,
+		.len	= PAGE_SIZE *
+			  (hyp_ffa_proxy_pages() - (2 * KVM_FFA_MBOX_NR_PAGES)),
+	};
+
+	hyp_buffers = (struct kvm_ffa_buffers) {
+		.lock	= __HYP_SPIN_LOCK_UNLOCKED,
+		.tx	= tx,
+		.rx	= rx,
+	};
+
+	host_buffers = (struct kvm_ffa_buffers) {
+		.lock	= __HYP_SPIN_LOCK_UNLOCKED,
+	};
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c b/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
new file mode 100644
index 000000000..6bc88a756
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/gen-hyprel.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 - Google LLC
+ * Author: David Brazdil <dbrazdil@google.com>
+ *
+ * Generates relocation information used by the kernel to convert
+ * absolute addresses in hyp data from kernel VAs to hyp VAs.
+ *
+ * This is necessary because hyp code is linked into the same binary
+ * as the kernel but executes under different memory mappings.
+ * If the compiler used absolute addressing, those addresses need to
+ * be converted before they are used by hyp code.
+ *
+ * The input of this program is the relocatable ELF object containing
+ * all hyp code/data, not yet linked into vmlinux. Hyp section names
+ * should have been prefixed with `.hyp` at this point.
+ *
+ * The output (printed to stdout) is an assembly file containing
+ * an array of 32-bit integers and static relocations that instruct
+ * the linker of `vmlinux` to populate the array entries with offsets
+ * to positions in the kernel binary containing VAs used by hyp code.
+ *
+ * Note that dynamic relocations could be used for the same purpose.
+ * However, those are only generated if CONFIG_RELOCATABLE=y.
+ */
+
+#include <elf.h>
+#include <endian.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include <generated/autoconf.h>
+
+#define HYP_SECTION_PREFIX		".hyp"
+#define HYP_RELOC_SECTION		".hyp.reloc"
+#define HYP_SECTION_SYMBOL_PREFIX	"__hyp_section_"
+
+/*
+ * AArch64 relocation type constants.
+ * Included in case these are not defined in the host toolchain.
+ */
+#ifndef R_AARCH64_ABS64
+#define R_AARCH64_ABS64			257
+#endif
+#ifndef R_AARCH64_PREL64
+#define R_AARCH64_PREL64		260
+#endif
+#ifndef R_AARCH64_PREL32
+#define R_AARCH64_PREL32		261
+#endif
+#ifndef R_AARCH64_PREL16
+#define R_AARCH64_PREL16		262
+#endif
+#ifndef R_AARCH64_PLT32
+#define R_AARCH64_PLT32			314
+#endif
+#ifndef R_AARCH64_LD_PREL_LO19
+#define R_AARCH64_LD_PREL_LO19		273
+#endif
+#ifndef R_AARCH64_ADR_PREL_LO21
+#define R_AARCH64_ADR_PREL_LO21		274
+#endif
+#ifndef R_AARCH64_ADR_PREL_PG_HI21
+#define R_AARCH64_ADR_PREL_PG_HI21	275
+#endif
+#ifndef R_AARCH64_ADR_PREL_PG_HI21_NC
+#define R_AARCH64_ADR_PREL_PG_HI21_NC	276
+#endif
+#ifndef R_AARCH64_ADD_ABS_LO12_NC
+#define R_AARCH64_ADD_ABS_LO12_NC	277
+#endif
+#ifndef R_AARCH64_LDST8_ABS_LO12_NC
+#define R_AARCH64_LDST8_ABS_LO12_NC	278
+#endif
+#ifndef R_AARCH64_TSTBR14
+#define R_AARCH64_TSTBR14		279
+#endif
+#ifndef R_AARCH64_CONDBR19
+#define R_AARCH64_CONDBR19		280
+#endif
+#ifndef R_AARCH64_JUMP26
+#define R_AARCH64_JUMP26		282
+#endif
+#ifndef R_AARCH64_CALL26
+#define R_AARCH64_CALL26		283
+#endif
+#ifndef R_AARCH64_LDST16_ABS_LO12_NC
+#define R_AARCH64_LDST16_ABS_LO12_NC	284
+#endif
+#ifndef R_AARCH64_LDST32_ABS_LO12_NC
+#define R_AARCH64_LDST32_ABS_LO12_NC	285
+#endif
+#ifndef R_AARCH64_LDST64_ABS_LO12_NC
+#define R_AARCH64_LDST64_ABS_LO12_NC	286
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G0
+#define R_AARCH64_MOVW_PREL_G0		287
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G0_NC
+#define R_AARCH64_MOVW_PREL_G0_NC	288
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G1
+#define R_AARCH64_MOVW_PREL_G1		289
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G1_NC
+#define R_AARCH64_MOVW_PREL_G1_NC	290
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G2
+#define R_AARCH64_MOVW_PREL_G2		291
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G2_NC
+#define R_AARCH64_MOVW_PREL_G2_NC	292
+#endif
+#ifndef R_AARCH64_MOVW_PREL_G3
+#define R_AARCH64_MOVW_PREL_G3		293
+#endif
+#ifndef R_AARCH64_LDST128_ABS_LO12_NC
+#define R_AARCH64_LDST128_ABS_LO12_NC	299
+#endif
+
+/* Global state of the processed ELF. */
+static struct {
+	const char	*path;
+	char		*begin;
+	size_t		size;
+	Elf64_Ehdr	*ehdr;
+	Elf64_Shdr	*sh_table;
+	const char	*sh_string;
+} elf;
+
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+
+#define elf16toh(x)	le16toh(x)
+#define elf32toh(x)	le32toh(x)
+#define elf64toh(x)	le64toh(x)
+
+#define ELFENDIAN	ELFDATA2LSB
+
+#elif defined(CONFIG_CPU_BIG_ENDIAN)
+
+#define elf16toh(x)	be16toh(x)
+#define elf32toh(x)	be32toh(x)
+#define elf64toh(x)	be64toh(x)
+
+#define ELFENDIAN	ELFDATA2MSB
+
+#else
+
+#error PDP-endian sadly unsupported...
+
+#endif
+
+#define fatal_error(fmt, ...)						\
+	({								\
+		fprintf(stderr, "error: %s: " fmt "\n",			\
+			elf.path, ## __VA_ARGS__);			\
+		exit(EXIT_FAILURE);					\
+		__builtin_unreachable();				\
+	})
+
+#define fatal_perror(msg)						\
+	({								\
+		fprintf(stderr, "error: %s: " msg ": %s\n",		\
+			elf.path, strerror(errno));			\
+		exit(EXIT_FAILURE);					\
+		__builtin_unreachable();				\
+	})
+
+#define assert_op(lhs, rhs, fmt, op)					\
+	({								\
+		typeof(lhs) _lhs = (lhs);				\
+		typeof(rhs) _rhs = (rhs);				\
+									\
+		if (!(_lhs op _rhs)) {					\
+			fatal_error("assertion " #lhs " " #op " " #rhs	\
+				" failed (lhs=" fmt ", rhs=" fmt	\
+				", line=%d)", _lhs, _rhs, __LINE__);	\
+		}							\
+	})
+
+#define assert_eq(lhs, rhs, fmt)	assert_op(lhs, rhs, fmt, ==)
+#define assert_ne(lhs, rhs, fmt)	assert_op(lhs, rhs, fmt, !=)
+#define assert_lt(lhs, rhs, fmt)	assert_op(lhs, rhs, fmt, <)
+#define assert_ge(lhs, rhs, fmt)	assert_op(lhs, rhs, fmt, >=)
+
+/*
+ * Return a pointer of a given type at a given offset from
+ * the beginning of the ELF file.
+ */
+#define elf_ptr(type, off) ((type *)(elf.begin + (off)))
+
+/* Iterate over all sections in the ELF. */
+#define for_each_section(var) \
+	for (var = elf.sh_table; var < elf.sh_table + elf16toh(elf.ehdr->e_shnum); ++var)
+
+/* Iterate over all Elf64_Rela relocations in a given section. */
+#define for_each_rela(shdr, var)					\
+	for (var = elf_ptr(Elf64_Rela, elf64toh(shdr->sh_offset));	\
+	     var < elf_ptr(Elf64_Rela, elf64toh(shdr->sh_offset) + elf64toh(shdr->sh_size)); var++)
+
+/* True if a string starts with a given prefix. */
+static inline bool starts_with(const char *str, const char *prefix)
+{
+	return memcmp(str, prefix, strlen(prefix)) == 0;
+}
+
+/* Returns a string containing the name of a given section. */
+static inline const char *section_name(Elf64_Shdr *shdr)
+{
+	return elf.sh_string + elf32toh(shdr->sh_name);
+}
+
+/* Returns a pointer to the first byte of section data. */
+static inline const char *section_begin(Elf64_Shdr *shdr)
+{
+	return elf_ptr(char, elf64toh(shdr->sh_offset));
+}
+
+/* Find a section by its offset from the beginning of the file. */
+static inline Elf64_Shdr *section_by_off(Elf64_Off off)
+{
+	assert_ne(off, 0UL, "%lu");
+	return elf_ptr(Elf64_Shdr, off);
+}
+
+/* Find a section by its index. */
+static inline Elf64_Shdr *section_by_idx(uint16_t idx)
+{
+	assert_ne(idx, SHN_UNDEF, "%u");
+	return &elf.sh_table[idx];
+}
+
+/*
+ * Memory-map the given ELF file, perform sanity checks, and
+ * populate global state.
+ */
+static void init_elf(const char *path)
+{
+	int fd, ret;
+	struct stat stat;
+
+	/* Store path in the global struct for error printing. */
+	elf.path = path;
+
+	/* Open the ELF file. */
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		fatal_perror("Could not open ELF file");
+
+	/* Get status of ELF file to obtain its size. */
+	ret = fstat(fd, &stat);
+	if (ret < 0) {
+		close(fd);
+		fatal_perror("Could not get status of ELF file");
+	}
+
+	/* mmap() the entire ELF file read-only at an arbitrary address. */
+	elf.begin = mmap(0, stat.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
+	if (elf.begin == MAP_FAILED) {
+		close(fd);
+		fatal_perror("Could not mmap ELF file");
+	}
+
+	/* mmap() was successful, close the FD. */
+	close(fd);
+
+	/* Get pointer to the ELF header. */
+	assert_ge(stat.st_size, sizeof(*elf.ehdr), "%lu");
+	elf.ehdr = elf_ptr(Elf64_Ehdr, 0);
+
+	/* Check the ELF magic. */
+	assert_eq(elf.ehdr->e_ident[EI_MAG0], ELFMAG0, "0x%x");
+	assert_eq(elf.ehdr->e_ident[EI_MAG1], ELFMAG1, "0x%x");
+	assert_eq(elf.ehdr->e_ident[EI_MAG2], ELFMAG2, "0x%x");
+	assert_eq(elf.ehdr->e_ident[EI_MAG3], ELFMAG3, "0x%x");
+
+	/* Sanity check that this is an ELF64 relocatable object for AArch64. */
+	assert_eq(elf.ehdr->e_ident[EI_CLASS], ELFCLASS64, "%u");
+	assert_eq(elf.ehdr->e_ident[EI_DATA], ELFENDIAN, "%u");
+	assert_eq(elf16toh(elf.ehdr->e_type), ET_REL, "%u");
+	assert_eq(elf16toh(elf.ehdr->e_machine), EM_AARCH64, "%u");
+
+	/* Populate fields of the global struct. */
+	elf.sh_table = section_by_off(elf64toh(elf.ehdr->e_shoff));
+	elf.sh_string = section_begin(section_by_idx(elf16toh(elf.ehdr->e_shstrndx)));
+}
+
+/* Print the prologue of the output ASM file. */
+static void emit_prologue(void)
+{
+	printf(".data\n"
+	       ".pushsection " HYP_RELOC_SECTION ", \"a\"\n");
+}
+
+/* Print ASM statements needed as a prologue to a processed hyp section. */
+static void emit_section_prologue(const char *sh_orig_name)
+{
+	/* Declare the hyp section symbol. */
+	printf(".global %s%s\n", HYP_SECTION_SYMBOL_PREFIX, sh_orig_name);
+}
+
+/*
+ * Print ASM statements to create a hyp relocation entry for a given
+ * R_AARCH64_ABS64 relocation.
+ *
+ * The linker of vmlinux will populate the position given by `rela` with
+ * an absolute 64-bit kernel VA. If the kernel is relocatable, it will
+ * also generate a dynamic relocation entry so that the kernel can shift
+ * the address at runtime for KASLR.
+ *
+ * Emit a 32-bit offset from the current address to the position given
+ * by `rela`. This way the kernel can iterate over all kernel VAs used
+ * by hyp at runtime and convert them to hyp VAs. However, that offset
+ * will not be known until linking of `vmlinux`, so emit a PREL32
+ * relocation referencing a symbol that the hyp linker script put at
+ * the beginning of the relocated section + the offset from `rela`.
+ */
+static void emit_rela_abs64(Elf64_Rela *rela, const char *sh_orig_name)
+{
+	/* Offset of this reloc from the beginning of HYP_RELOC_SECTION. */
+	static size_t reloc_offset;
+
+	/* Create storage for the 32-bit offset. */
+	printf(".word 0\n");
+
+	/*
+	 * Create a PREL32 relocation which instructs the linker of `vmlinux`
+	 * to insert offset to position <base> + <offset>, where <base> is
+	 * a symbol at the beginning of the relocated section, and <offset>
+	 * is `rela->r_offset`.
+	 */
+	printf(".reloc %lu, R_AARCH64_PREL32, %s%s + 0x%lx\n",
+	       reloc_offset, HYP_SECTION_SYMBOL_PREFIX, sh_orig_name,
+	       elf64toh(rela->r_offset));
+
+	reloc_offset += 4;
+}
+
+/* Print the epilogue of the output ASM file. */
+static void emit_epilogue(void)
+{
+	printf(".popsection\n");
+}
+
+/*
+ * Iterate over all RELA relocations in a given section and emit
+ * hyp relocation data for all absolute addresses in hyp code/data.
+ *
+ * Static relocations that generate PC-relative-addressing are ignored.
+ * Failure is reported for unexpected relocation types.
+ */
+static void emit_rela_section(Elf64_Shdr *sh_rela)
+{
+	Elf64_Shdr *sh_orig = &elf.sh_table[elf32toh(sh_rela->sh_info)];
+	const char *sh_orig_name = section_name(sh_orig);
+	Elf64_Rela *rela;
+
+	/* Skip all non-hyp sections. */
+	if (!starts_with(sh_orig_name, HYP_SECTION_PREFIX))
+		return;
+
+	emit_section_prologue(sh_orig_name);
+
+	for_each_rela(sh_rela, rela) {
+		uint32_t type = (uint32_t)elf64toh(rela->r_info);
+
+		/* Check that rela points inside the relocated section. */
+		assert_lt(elf64toh(rela->r_offset), elf64toh(sh_orig->sh_size), "0x%lx");
+
+		switch (type) {
+		/*
+		 * Data relocations to generate absolute addressing.
+		 * Emit a hyp relocation.
+		 */
+		case R_AARCH64_ABS64:
+			emit_rela_abs64(rela, sh_orig_name);
+			break;
+		/* Allow position-relative data relocations. */
+		case R_AARCH64_PREL64:
+		case R_AARCH64_PREL32:
+		case R_AARCH64_PREL16:
+		case R_AARCH64_PLT32:
+			break;
+		/* Allow relocations to generate PC-relative addressing. */
+		case R_AARCH64_LD_PREL_LO19:
+		case R_AARCH64_ADR_PREL_LO21:
+		case R_AARCH64_ADR_PREL_PG_HI21:
+		case R_AARCH64_ADR_PREL_PG_HI21_NC:
+		case R_AARCH64_ADD_ABS_LO12_NC:
+		case R_AARCH64_LDST8_ABS_LO12_NC:
+		case R_AARCH64_LDST16_ABS_LO12_NC:
+		case R_AARCH64_LDST32_ABS_LO12_NC:
+		case R_AARCH64_LDST64_ABS_LO12_NC:
+		case R_AARCH64_LDST128_ABS_LO12_NC:
+			break;
+		/* Allow relative relocations for control-flow instructions. */
+		case R_AARCH64_TSTBR14:
+		case R_AARCH64_CONDBR19:
+		case R_AARCH64_JUMP26:
+		case R_AARCH64_CALL26:
+			break;
+		/* Allow group relocations to create PC-relative offset inline. */
+		case R_AARCH64_MOVW_PREL_G0:
+		case R_AARCH64_MOVW_PREL_G0_NC:
+		case R_AARCH64_MOVW_PREL_G1:
+		case R_AARCH64_MOVW_PREL_G1_NC:
+		case R_AARCH64_MOVW_PREL_G2:
+		case R_AARCH64_MOVW_PREL_G2_NC:
+		case R_AARCH64_MOVW_PREL_G3:
+			break;
+		default:
+			fatal_error("Unexpected RELA type %u", type);
+		}
+	}
+}
+
+/* Iterate over all sections and emit hyp relocation data for RELA sections. */
+static void emit_all_relocs(void)
+{
+	Elf64_Shdr *shdr;
+
+	for_each_section(shdr) {
+		switch (elf32toh(shdr->sh_type)) {
+		case SHT_REL:
+			fatal_error("Unexpected SHT_REL section \"%s\"",
+				section_name(shdr));
+		case SHT_RELA:
+			emit_rela_section(shdr);
+			break;
+		}
+	}
+}
+
+int main(int argc, const char **argv)
+{
+	if (argc != 2) {
+		fprintf(stderr, "Usage: %s <elf_input>\n", argv[0]);
+		return EXIT_FAILURE;
+	}
+
+	init_elf(argv[1]);
+
+	emit_prologue();
+	emit_all_relocs();
+	emit_epilogue();
+
+	return EXIT_SUCCESS;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
new file mode 100644
index 000000000..7693a6757
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 - Google Inc
+ * Author: Andrew Scull <ascull@google.com>
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_ptrauth.h>
+
+	.text
+
+SYM_FUNC_START(__host_exit)
+	get_host_ctxt	x0, x1
+
+	/* Store the host regs x2 and x3 */
+	stp	x2, x3,   [x0, #CPU_XREG_OFFSET(2)]
+
+	/* Retrieve the host regs x0-x1 from the stack */
+	ldp	x2, x3, [sp], #16	// x0, x1
+
+	/* Store the host regs x0-x1 and x4-x17 */
+	stp	x2, x3,   [x0, #CPU_XREG_OFFSET(0)]
+	stp	x4, x5,   [x0, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x0, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x0, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x0, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x0, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x0, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x0, #CPU_XREG_OFFSET(16)]
+
+	/* Store the host regs x18-x29, lr */
+	save_callee_saved_regs x0
+
+	/* Save the host context pointer in x29 across the function call */
+	mov	x29, x0
+
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+b __skip_pauth_save
+alternative_else_nop_endif
+
+alternative_if ARM64_KVM_PROTECTED_MODE
+	/* Save kernel ptrauth keys. */
+	add x18, x29, #CPU_APIAKEYLO_EL1
+	ptrauth_save_state x18, x19, x20
+
+	/* Use hyp keys. */
+	adr_this_cpu x18, kvm_hyp_ctxt, x19
+	add x18, x18, #CPU_APIAKEYLO_EL1
+	ptrauth_restore_state x18, x19, x20
+	isb
+alternative_else_nop_endif
+__skip_pauth_save:
+#endif /* CONFIG_ARM64_PTR_AUTH_KERNEL */
+
+	bl	handle_trap
+
+__host_enter_restore_full:
+	/* Restore kernel keys. */
+#ifdef CONFIG_ARM64_PTR_AUTH_KERNEL
+alternative_if_not ARM64_HAS_ADDRESS_AUTH
+b __skip_pauth_restore
+alternative_else_nop_endif
+
+alternative_if ARM64_KVM_PROTECTED_MODE
+	add x18, x29, #CPU_APIAKEYLO_EL1
+	ptrauth_restore_state x18, x19, x20
+alternative_else_nop_endif
+__skip_pauth_restore:
+#endif /* CONFIG_ARM64_PTR_AUTH_KERNEL */
+
+	/* Restore host regs x0-x17 */
+	ldp	x0, x1,   [x29, #CPU_XREG_OFFSET(0)]
+	ldp	x2, x3,   [x29, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x29, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x29, #CPU_XREG_OFFSET(6)]
+
+	/* x0-7 are use for panic arguments */
+__host_enter_for_panic:
+	ldp	x8, x9,   [x29, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x29, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x29, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x29, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x29, #CPU_XREG_OFFSET(16)]
+
+	/* Restore host regs x18-x29, lr */
+	restore_callee_saved_regs x29
+
+	/* Do not touch any register after this! */
+__host_enter_without_restoring:
+	eret
+	sb
+SYM_FUNC_END(__host_exit)
+
+/*
+ * void __noreturn __host_enter(struct kvm_cpu_context *host_ctxt);
+ */
+SYM_FUNC_START(__host_enter)
+	mov	x29, x0
+	b	__host_enter_restore_full
+SYM_FUNC_END(__host_enter)
+
+/*
+ * void __noreturn __hyp_do_panic(struct kvm_cpu_context *host_ctxt, u64 spsr,
+ * 				  u64 elr, u64 par);
+ */
+SYM_FUNC_START(__hyp_do_panic)
+	/* Prepare and exit to the host's panic funciton. */
+	mov	lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
+		      PSR_MODE_EL1h)
+	msr	spsr_el2, lr
+	adr_l	lr, nvhe_hyp_panic_handler
+	hyp_kimg_va lr, x6
+	msr	elr_el2, lr
+
+	mov	x29, x0
+
+#ifdef CONFIG_NVHE_EL2_DEBUG
+	/* Ensure host stage-2 is disabled */
+	mrs	x0, hcr_el2
+	bic	x0, x0, #HCR_VM
+	msr	hcr_el2, x0
+	isb
+	tlbi	vmalls12e1
+	dsb	nsh
+#endif
+
+	/* Load the panic arguments into x0-7 */
+	mrs	x0, esr_el2
+	mov	x4, x3
+	mov	x3, x2
+	hyp_pa	x3, x6
+	get_vcpu_ptr x5, x6
+	mrs	x6, far_el2
+	mrs	x7, hpfar_el2
+
+	/* Enter the host, conditionally restoring the host context. */
+	cbz	x29, __host_enter_without_restoring
+	b	__host_enter_for_panic
+SYM_FUNC_END(__hyp_do_panic)
+
+SYM_FUNC_START(__host_hvc)
+	ldp	x0, x1, [sp]		// Don't fixup the stack yet
+
+	/* No stub for you, sonny Jim */
+alternative_if ARM64_KVM_PROTECTED_MODE
+	b	__host_exit
+alternative_else_nop_endif
+
+	/* Check for a stub HVC call */
+	cmp	x0, #HVC_STUB_HCALL_NR
+	b.hs	__host_exit
+
+	add	sp, sp, #16
+	/*
+	 * Compute the idmap address of __kvm_handle_stub_hvc and
+	 * jump there.
+	 *
+	 * Preserve x0-x4, which may contain stub parameters.
+	 */
+	adr_l	x5, __kvm_handle_stub_hvc
+	hyp_pa	x5, x6
+	br	x5
+SYM_FUNC_END(__host_hvc)
+
+.macro host_el1_sync_vect
+	.align 7
+.L__vect_start\@:
+	stp	x0, x1, [sp, #-16]!
+	mrs	x0, esr_el2
+	ubfx	x0, x0, #ESR_ELx_EC_SHIFT, #ESR_ELx_EC_WIDTH
+	cmp	x0, #ESR_ELx_EC_HVC64
+	b.eq	__host_hvc
+	b	__host_exit
+.L__vect_end\@:
+.if ((.L__vect_end\@ - .L__vect_start\@) > 0x80)
+	.error "host_el1_sync_vect larger than vector entry"
+.endif
+.endm
+
+.macro invalid_host_el2_vect
+	.align 7
+
+	/*
+	 * Test whether the SP has overflowed, without corrupting a GPR.
+	 * nVHE hypervisor stacks are aligned so that the PAGE_SHIFT bit
+	 * of SP should always be 1.
+	 */
+	add	sp, sp, x0			// sp' = sp + x0
+	sub	x0, sp, x0			// x0' = sp' - x0 = (sp + x0) - x0 = sp
+	tbz	x0, #PAGE_SHIFT, .L__hyp_sp_overflow\@
+	sub	x0, sp, x0			// x0'' = sp' - x0' = (sp + x0) - sp = x0
+	sub	sp, sp, x0			// sp'' = sp' - x0 = (sp + x0) - x0 = sp
+
+	/* If a guest is loaded, panic out of it. */
+	stp	x0, x1, [sp, #-16]!
+	get_loaded_vcpu x0, x1
+	cbnz	x0, __guest_exit_panic
+	add	sp, sp, #16
+
+	/*
+	 * The panic may not be clean if the exception is taken before the host
+	 * context has been saved by __host_exit or after the hyp context has
+	 * been partially clobbered by __host_enter.
+	 */
+	b	hyp_panic
+
+.L__hyp_sp_overflow\@:
+	/* Switch to the overflow stack */
+	adr_this_cpu sp, overflow_stack + OVERFLOW_STACK_SIZE, x0
+
+	b	hyp_panic_bad_stack
+	ASM_BUG()
+.endm
+
+.macro invalid_host_el1_vect
+	.align 7
+	mov	x0, xzr		/* restore_host = false */
+	mrs	x1, spsr_el2
+	mrs	x2, elr_el2
+	mrs	x3, par_el1
+	b	__hyp_do_panic
+.endm
+
+/*
+ * The host vector does not use an ESB instruction in order to avoid consuming
+ * SErrors that should only be consumed by the host. Guest entry is deferred by
+ * __guest_enter if there are any pending asynchronous exceptions so hyp will
+ * always return to the host without having consumerd host SErrors.
+ *
+ * CONFIG_KVM_INDIRECT_VECTORS is not applied to the host vectors because the
+ * host knows about the EL2 vectors already, and there is no point in hiding
+ * them.
+ */
+	.align 11
+SYM_CODE_START(__kvm_hyp_host_vector)
+	invalid_host_el2_vect			// Synchronous EL2t
+	invalid_host_el2_vect			// IRQ EL2t
+	invalid_host_el2_vect			// FIQ EL2t
+	invalid_host_el2_vect			// Error EL2t
+
+	invalid_host_el2_vect			// Synchronous EL2h
+	invalid_host_el2_vect			// IRQ EL2h
+	invalid_host_el2_vect			// FIQ EL2h
+	invalid_host_el2_vect			// Error EL2h
+
+	host_el1_sync_vect			// Synchronous 64-bit EL1/EL0
+	invalid_host_el1_vect			// IRQ 64-bit EL1/EL0
+	invalid_host_el1_vect			// FIQ 64-bit EL1/EL0
+	invalid_host_el1_vect			// Error 64-bit EL1/EL0
+
+	host_el1_sync_vect			// Synchronous 32-bit EL1/EL0
+	invalid_host_el1_vect			// IRQ 32-bit EL1/EL0
+	invalid_host_el1_vect			// FIQ 32-bit EL1/EL0
+	invalid_host_el1_vect			// Error 32-bit EL1/EL0
+SYM_CODE_END(__kvm_hyp_host_vector)
+
+/*
+ * Forward SMC with arguments in struct kvm_cpu_context, and
+ * store the result into the same struct. Assumes SMCCC 1.2 or older.
+ *
+ * x0: struct kvm_cpu_context*
+ */
+SYM_CODE_START(__kvm_hyp_host_forward_smc)
+	/*
+	 * Use x18 to keep the pointer to the host context because
+	 * x18 is callee-saved in SMCCC but not in AAPCS64.
+	 */
+	mov	x18, x0
+
+	ldp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	ldp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	ldp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
+
+	smc	#0
+
+	stp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	stp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	stp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
+
+	ret
+SYM_CODE_END(__kvm_hyp_host_forward_smc)
+
+/*
+ * kvm_host_psci_cpu_entry is called through br instruction, which requires
+ * bti j instruction as compilers (gcc and llvm) doesn't insert bti j for external
+ * functions, but bti c instead.
+ */
+SYM_CODE_START(kvm_host_psci_cpu_entry)
+       bti j
+       b __kvm_host_psci_cpu_entry
+SYM_CODE_END(kvm_host_psci_cpu_entry)
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-init.S b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
new file mode 100644
index 000000000..1cc06e679
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-init.S
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/linkage.h>
+
+#include <asm/alternative.h>
+#include <asm/assembler.h>
+#include <asm/el2_setup.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/sysreg.h>
+#include <asm/virt.h>
+
+	.text
+	.pushsection	.idmap.text, "ax"
+
+	.align	11
+
+SYM_CODE_START(__kvm_hyp_init)
+	ventry	__invalid		// Synchronous EL2t
+	ventry	__invalid		// IRQ EL2t
+	ventry	__invalid		// FIQ EL2t
+	ventry	__invalid		// Error EL2t
+
+	ventry	__invalid		// Synchronous EL2h
+	ventry	__invalid		// IRQ EL2h
+	ventry	__invalid		// FIQ EL2h
+	ventry	__invalid		// Error EL2h
+
+	ventry	__do_hyp_init		// Synchronous 64-bit EL1
+	ventry	__invalid		// IRQ 64-bit EL1
+	ventry	__invalid		// FIQ 64-bit EL1
+	ventry	__invalid		// Error 64-bit EL1
+
+	ventry	__invalid		// Synchronous 32-bit EL1
+	ventry	__invalid		// IRQ 32-bit EL1
+	ventry	__invalid		// FIQ 32-bit EL1
+	ventry	__invalid		// Error 32-bit EL1
+
+__invalid:
+	b	.
+
+	/*
+	 * Only uses x0..x3 so as to not clobber callee-saved SMCCC registers.
+	 *
+	 * x0: SMCCC function ID
+	 * x1: struct kvm_nvhe_init_params PA
+	 */
+__do_hyp_init:
+	/* Check for a stub HVC call */
+	cmp	x0, #HVC_STUB_HCALL_NR
+	b.lo	__kvm_handle_stub_hvc
+
+	bic	x0, x0, #ARM_SMCCC_CALL_HINTS
+	mov	x3, #KVM_HOST_SMCCC_FUNC(__kvm_hyp_init)
+	cmp	x0, x3
+	b.eq	1f
+
+	mov	x0, #SMCCC_RET_NOT_SUPPORTED
+	eret
+
+1:	mov	x0, x1
+	mov	x3, lr
+	bl	___kvm_hyp_init			// Clobbers x0..x2
+	mov	lr, x3
+
+	/* Hello, World! */
+	mov	x0, #SMCCC_RET_SUCCESS
+	eret
+SYM_CODE_END(__kvm_hyp_init)
+
+/*
+ * Initialize the hypervisor in EL2.
+ *
+ * Only uses x0..x2 so as to not clobber callee-saved SMCCC registers
+ * and leave x3 for the caller.
+ *
+ * x0: struct kvm_nvhe_init_params PA
+ */
+SYM_CODE_START_LOCAL(___kvm_hyp_init)
+	ldr	x1, [x0, #NVHE_INIT_STACK_HYP_VA]
+	mov	sp, x1
+
+	ldr	x1, [x0, #NVHE_INIT_MAIR_EL2]
+	msr	mair_el2, x1
+
+	ldr	x1, [x0, #NVHE_INIT_HCR_EL2]
+	msr	hcr_el2, x1
+
+	mov	x2, #HCR_E2H
+	and	x2, x1, x2
+	cbz	x2, 1f
+
+	// hVHE: Replay the EL2 setup to account for the E2H bit
+	// TPIDR_EL2 is used to preserve x0 across the macro maze...
+	isb
+	msr	tpidr_el2, x0
+	init_el2_state
+	finalise_el2_state
+	mrs	x0, tpidr_el2
+
+1:
+	ldr	x1, [x0, #NVHE_INIT_TPIDR_EL2]
+	msr	tpidr_el2, x1
+
+	ldr	x1, [x0, #NVHE_INIT_VTTBR]
+	msr	vttbr_el2, x1
+
+	ldr	x1, [x0, #NVHE_INIT_VTCR]
+	msr	vtcr_el2, x1
+
+	ldr	x1, [x0, #NVHE_INIT_PGD_PA]
+	phys_to_ttbr x2, x1
+alternative_if ARM64_HAS_CNP
+	orr	x2, x2, #TTBR_CNP_BIT
+alternative_else_nop_endif
+	msr	ttbr0_el2, x2
+
+	/*
+	 * Set the PS bits in TCR_EL2.
+	 */
+	ldr	x0, [x0, #NVHE_INIT_TCR_EL2]
+	tcr_compute_pa_size x0, #TCR_EL2_PS_SHIFT, x1, x2
+	msr	tcr_el2, x0
+
+	isb
+
+	/* Invalidate the stale TLBs from Bootloader */
+	tlbi	alle2
+	tlbi	vmalls12e1
+	dsb	sy
+
+	mov_q	x0, INIT_SCTLR_EL2_MMU_ON
+alternative_if ARM64_HAS_ADDRESS_AUTH
+	mov_q	x1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
+		     SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)
+	orr	x0, x0, x1
+alternative_else_nop_endif
+
+#ifdef CONFIG_ARM64_BTI_KERNEL
+alternative_if ARM64_BTI
+	orr	x0, x0, #SCTLR_EL2_BT
+alternative_else_nop_endif
+#endif /* CONFIG_ARM64_BTI_KERNEL */
+
+	msr	sctlr_el2, x0
+	isb
+
+	/* Set the host vector */
+	ldr	x0, =__kvm_hyp_host_vector
+	msr	vbar_el2, x0
+
+	ret
+SYM_CODE_END(___kvm_hyp_init)
+
+/*
+ * PSCI CPU_ON entry point
+ *
+ * x0: struct kvm_nvhe_init_params PA
+ */
+SYM_CODE_START(kvm_hyp_cpu_entry)
+	mov	x1, #1				// is_cpu_on = true
+	b	__kvm_hyp_init_cpu
+SYM_CODE_END(kvm_hyp_cpu_entry)
+
+/*
+ * PSCI CPU_SUSPEND / SYSTEM_SUSPEND entry point
+ *
+ * x0: struct kvm_nvhe_init_params PA
+ */
+SYM_CODE_START(kvm_hyp_cpu_resume)
+	mov	x1, #0				// is_cpu_on = false
+	b	__kvm_hyp_init_cpu
+SYM_CODE_END(kvm_hyp_cpu_resume)
+
+/*
+ * Common code for CPU entry points. Initializes EL2 state and
+ * installs the hypervisor before handing over to a C handler.
+ *
+ * x0: struct kvm_nvhe_init_params PA
+ * x1: bool is_cpu_on
+ */
+SYM_CODE_START_LOCAL(__kvm_hyp_init_cpu)
+	mov	x28, x0				// Stash arguments
+	mov	x29, x1
+
+	/* Check that the core was booted in EL2. */
+	mrs	x0, CurrentEL
+	cmp	x0, #CurrentEL_EL2
+	b.eq	2f
+
+	/* The core booted in EL1. KVM cannot be initialized on it. */
+1:	wfe
+	wfi
+	b	1b
+
+2:	msr	SPsel, #1			// We want to use SP_EL{1,2}
+
+	/* Initialize EL2 CPU state to sane values. */
+	init_el2_state				// Clobbers x0..x2
+	finalise_el2_state
+	__init_el2_nvhe_prepare_eret
+
+	/* Enable MMU, set vectors and stack. */
+	mov	x0, x28
+	bl	___kvm_hyp_init			// Clobbers x0..x2
+
+	/* Leave idmap. */
+	mov	x0, x29
+	ldr	x1, =kvm_host_psci_cpu_entry
+	br	x1
+SYM_CODE_END(__kvm_hyp_init_cpu)
+
+SYM_CODE_START(__kvm_handle_stub_hvc)
+	/*
+	 * __kvm_handle_stub_hvc called from __host_hvc through branch instruction(br) so
+	 * we need bti j at beginning.
+	 */
+	bti j
+	cmp	x0, #HVC_SOFT_RESTART
+	b.ne	1f
+
+	/* This is where we're about to jump, staying at EL2 */
+	msr	elr_el2, x1
+	mov	x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT | PSR_MODE_EL2h)
+	msr	spsr_el2, x0
+
+	/* Shuffle the arguments, and don't come back */
+	mov	x0, x2
+	mov	x1, x3
+	mov	x2, x4
+	b	reset
+
+1:	cmp	x0, #HVC_RESET_VECTORS
+	b.ne	1f
+
+	/*
+	 * Set the HVC_RESET_VECTORS return code before entering the common
+	 * path so that we do not clobber x0-x2 in case we are coming via
+	 * HVC_SOFT_RESTART.
+	 */
+	mov	x0, xzr
+reset:
+	/* Reset kvm back to the hyp stub. */
+	mov_q	x5, INIT_SCTLR_EL2_MMU_OFF
+	pre_disable_mmu_workaround
+	msr	sctlr_el2, x5
+	isb
+
+alternative_if ARM64_KVM_PROTECTED_MODE
+	mov_q	x5, HCR_HOST_NVHE_FLAGS
+	msr	hcr_el2, x5
+alternative_else_nop_endif
+
+	/* Install stub vectors */
+	adr_l	x5, __hyp_stub_vectors
+	msr	vbar_el2, x5
+	eret
+
+1:	/* Bad stub call */
+	mov_q	x0, HVC_STUB_ERR
+	eret
+
+SYM_CODE_END(__kvm_handle_stub_hvc)
+
+SYM_FUNC_START(__pkvm_init_switch_pgd)
+	/* Turn the MMU off */
+	pre_disable_mmu_workaround
+	mrs	x2, sctlr_el2
+	bic	x3, x2, #SCTLR_ELx_M
+	msr	sctlr_el2, x3
+	isb
+
+	tlbi	alle2
+
+	/* Install the new pgtables */
+	ldr	x3, [x0, #NVHE_INIT_PGD_PA]
+	phys_to_ttbr x4, x3
+alternative_if ARM64_HAS_CNP
+	orr	x4, x4, #TTBR_CNP_BIT
+alternative_else_nop_endif
+	msr	ttbr0_el2, x4
+
+	/* Set the new stack pointer */
+	ldr	x0, [x0, #NVHE_INIT_STACK_HYP_VA]
+	mov	sp, x0
+
+	/* And turn the MMU back on! */
+	set_sctlr_el2	x2
+	ret	x1
+SYM_FUNC_END(__pkvm_init_switch_pgd)
+
+	.popsection
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
new file mode 100644
index 000000000..2385fd03e
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 - Google Inc
+ * Author: Andrew Scull <ascull@google.com>
+ */
+
+#include <hyp/adjust_pc.h>
+
+#include <asm/pgtable-types.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_host.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+#include <nvhe/ffa.h>
+#include <nvhe/mem_protect.h>
+#include <nvhe/mm.h>
+#include <nvhe/pkvm.h>
+#include <nvhe/trap_handler.h>
+
+DEFINE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
+
+void __kvm_hyp_host_forward_smc(struct kvm_cpu_context *host_ctxt);
+
+static void flush_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
+
+	hyp_vcpu->vcpu.arch.ctxt	= host_vcpu->arch.ctxt;
+
+	hyp_vcpu->vcpu.arch.sve_state	= kern_hyp_va(host_vcpu->arch.sve_state);
+	hyp_vcpu->vcpu.arch.sve_max_vl	= host_vcpu->arch.sve_max_vl;
+
+	hyp_vcpu->vcpu.arch.hw_mmu	= host_vcpu->arch.hw_mmu;
+
+	hyp_vcpu->vcpu.arch.hcr_el2	= host_vcpu->arch.hcr_el2;
+	hyp_vcpu->vcpu.arch.mdcr_el2	= host_vcpu->arch.mdcr_el2;
+	hyp_vcpu->vcpu.arch.cptr_el2	= host_vcpu->arch.cptr_el2;
+
+	hyp_vcpu->vcpu.arch.iflags	= host_vcpu->arch.iflags;
+	hyp_vcpu->vcpu.arch.fp_state	= host_vcpu->arch.fp_state;
+
+	hyp_vcpu->vcpu.arch.debug_ptr	= kern_hyp_va(host_vcpu->arch.debug_ptr);
+	hyp_vcpu->vcpu.arch.host_fpsimd_state = host_vcpu->arch.host_fpsimd_state;
+
+	hyp_vcpu->vcpu.arch.vsesr_el2	= host_vcpu->arch.vsesr_el2;
+
+	hyp_vcpu->vcpu.arch.vgic_cpu.vgic_v3 = host_vcpu->arch.vgic_cpu.vgic_v3;
+}
+
+static void sync_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	struct kvm_vcpu *host_vcpu = hyp_vcpu->host_vcpu;
+	struct vgic_v3_cpu_if *hyp_cpu_if = &hyp_vcpu->vcpu.arch.vgic_cpu.vgic_v3;
+	struct vgic_v3_cpu_if *host_cpu_if = &host_vcpu->arch.vgic_cpu.vgic_v3;
+	unsigned int i;
+
+	host_vcpu->arch.ctxt		= hyp_vcpu->vcpu.arch.ctxt;
+
+	host_vcpu->arch.hcr_el2		= hyp_vcpu->vcpu.arch.hcr_el2;
+	host_vcpu->arch.cptr_el2	= hyp_vcpu->vcpu.arch.cptr_el2;
+
+	host_vcpu->arch.fault		= hyp_vcpu->vcpu.arch.fault;
+
+	host_vcpu->arch.iflags		= hyp_vcpu->vcpu.arch.iflags;
+	host_vcpu->arch.fp_state	= hyp_vcpu->vcpu.arch.fp_state;
+
+	host_cpu_if->vgic_hcr		= hyp_cpu_if->vgic_hcr;
+	for (i = 0; i < hyp_cpu_if->used_lrs; ++i)
+		host_cpu_if->vgic_lr[i] = hyp_cpu_if->vgic_lr[i];
+}
+
+static void handle___kvm_vcpu_run(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_vcpu *, host_vcpu, host_ctxt, 1);
+	int ret;
+
+	host_vcpu = kern_hyp_va(host_vcpu);
+
+	if (unlikely(is_protected_kvm_enabled())) {
+		struct pkvm_hyp_vcpu *hyp_vcpu;
+		struct kvm *host_kvm;
+
+		host_kvm = kern_hyp_va(host_vcpu->kvm);
+		hyp_vcpu = pkvm_load_hyp_vcpu(host_kvm->arch.pkvm.handle,
+					      host_vcpu->vcpu_idx);
+		if (!hyp_vcpu) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		flush_hyp_vcpu(hyp_vcpu);
+
+		ret = __kvm_vcpu_run(&hyp_vcpu->vcpu);
+
+		sync_hyp_vcpu(hyp_vcpu);
+		pkvm_put_hyp_vcpu(hyp_vcpu);
+	} else {
+		/* The host is fully trusted, run its vCPU directly. */
+		ret = __kvm_vcpu_run(host_vcpu);
+	}
+
+out:
+	cpu_reg(host_ctxt, 1) =  ret;
+}
+
+static void handle___kvm_adjust_pc(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_vcpu *, vcpu, host_ctxt, 1);
+
+	__kvm_adjust_pc(kern_hyp_va(vcpu));
+}
+
+static void handle___kvm_flush_vm_context(struct kvm_cpu_context *host_ctxt)
+{
+	__kvm_flush_vm_context();
+}
+
+static void handle___kvm_tlb_flush_vmid_ipa(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1);
+	DECLARE_REG(phys_addr_t, ipa, host_ctxt, 2);
+	DECLARE_REG(int, level, host_ctxt, 3);
+
+	__kvm_tlb_flush_vmid_ipa(kern_hyp_va(mmu), ipa, level);
+}
+
+static void handle___kvm_tlb_flush_vmid_ipa_nsh(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1);
+	DECLARE_REG(phys_addr_t, ipa, host_ctxt, 2);
+	DECLARE_REG(int, level, host_ctxt, 3);
+
+	__kvm_tlb_flush_vmid_ipa_nsh(kern_hyp_va(mmu), ipa, level);
+}
+
+static void
+handle___kvm_tlb_flush_vmid_range(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1);
+	DECLARE_REG(phys_addr_t, start, host_ctxt, 2);
+	DECLARE_REG(unsigned long, pages, host_ctxt, 3);
+
+	__kvm_tlb_flush_vmid_range(kern_hyp_va(mmu), start, pages);
+}
+
+static void handle___kvm_tlb_flush_vmid(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1);
+
+	__kvm_tlb_flush_vmid(kern_hyp_va(mmu));
+}
+
+static void handle___kvm_flush_cpu_context(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_s2_mmu *, mmu, host_ctxt, 1);
+
+	__kvm_flush_cpu_context(kern_hyp_va(mmu));
+}
+
+static void handle___kvm_timer_set_cntvoff(struct kvm_cpu_context *host_ctxt)
+{
+	__kvm_timer_set_cntvoff(cpu_reg(host_ctxt, 1));
+}
+
+static void handle___kvm_enable_ssbs(struct kvm_cpu_context *host_ctxt)
+{
+	u64 tmp;
+
+	tmp = read_sysreg_el2(SYS_SCTLR);
+	tmp |= SCTLR_ELx_DSSBS;
+	write_sysreg_el2(tmp, SYS_SCTLR);
+}
+
+static void handle___vgic_v3_get_gic_config(struct kvm_cpu_context *host_ctxt)
+{
+	cpu_reg(host_ctxt, 1) = __vgic_v3_get_gic_config();
+}
+
+static void handle___vgic_v3_read_vmcr(struct kvm_cpu_context *host_ctxt)
+{
+	cpu_reg(host_ctxt, 1) = __vgic_v3_read_vmcr();
+}
+
+static void handle___vgic_v3_write_vmcr(struct kvm_cpu_context *host_ctxt)
+{
+	__vgic_v3_write_vmcr(cpu_reg(host_ctxt, 1));
+}
+
+static void handle___vgic_v3_init_lrs(struct kvm_cpu_context *host_ctxt)
+{
+	__vgic_v3_init_lrs();
+}
+
+static void handle___kvm_get_mdcr_el2(struct kvm_cpu_context *host_ctxt)
+{
+	cpu_reg(host_ctxt, 1) = __kvm_get_mdcr_el2();
+}
+
+static void handle___vgic_v3_save_aprs(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct vgic_v3_cpu_if *, cpu_if, host_ctxt, 1);
+
+	__vgic_v3_save_aprs(kern_hyp_va(cpu_if));
+}
+
+static void handle___vgic_v3_restore_aprs(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct vgic_v3_cpu_if *, cpu_if, host_ctxt, 1);
+
+	__vgic_v3_restore_aprs(kern_hyp_va(cpu_if));
+}
+
+static void handle___pkvm_init(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(phys_addr_t, phys, host_ctxt, 1);
+	DECLARE_REG(unsigned long, size, host_ctxt, 2);
+	DECLARE_REG(unsigned long, nr_cpus, host_ctxt, 3);
+	DECLARE_REG(unsigned long *, per_cpu_base, host_ctxt, 4);
+	DECLARE_REG(u32, hyp_va_bits, host_ctxt, 5);
+
+	/*
+	 * __pkvm_init() will return only if an error occurred, otherwise it
+	 * will tail-call in __pkvm_init_finalise() which will have to deal
+	 * with the host context directly.
+	 */
+	cpu_reg(host_ctxt, 1) = __pkvm_init(phys, size, nr_cpus, per_cpu_base,
+					    hyp_va_bits);
+}
+
+static void handle___pkvm_cpu_set_vector(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(enum arm64_hyp_spectre_vector, slot, host_ctxt, 1);
+
+	cpu_reg(host_ctxt, 1) = pkvm_cpu_set_vector(slot);
+}
+
+static void handle___pkvm_host_share_hyp(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, pfn, host_ctxt, 1);
+
+	cpu_reg(host_ctxt, 1) = __pkvm_host_share_hyp(pfn);
+}
+
+static void handle___pkvm_host_unshare_hyp(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, pfn, host_ctxt, 1);
+
+	cpu_reg(host_ctxt, 1) = __pkvm_host_unshare_hyp(pfn);
+}
+
+static void handle___pkvm_create_private_mapping(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(phys_addr_t, phys, host_ctxt, 1);
+	DECLARE_REG(size_t, size, host_ctxt, 2);
+	DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 3);
+
+	/*
+	 * __pkvm_create_private_mapping() populates a pointer with the
+	 * hypervisor start address of the allocation.
+	 *
+	 * However, handle___pkvm_create_private_mapping() hypercall crosses the
+	 * EL1/EL2 boundary so the pointer would not be valid in this context.
+	 *
+	 * Instead pass the allocation address as the return value (or return
+	 * ERR_PTR() on failure).
+	 */
+	unsigned long haddr;
+	int err = __pkvm_create_private_mapping(phys, size, prot, &haddr);
+
+	if (err)
+		haddr = (unsigned long)ERR_PTR(err);
+
+	cpu_reg(host_ctxt, 1) = haddr;
+}
+
+static void handle___pkvm_prot_finalize(struct kvm_cpu_context *host_ctxt)
+{
+	cpu_reg(host_ctxt, 1) = __pkvm_prot_finalize();
+}
+
+static void handle___pkvm_vcpu_init_traps(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm_vcpu *, vcpu, host_ctxt, 1);
+
+	__pkvm_vcpu_init_traps(kern_hyp_va(vcpu));
+}
+
+static void handle___pkvm_init_vm(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(struct kvm *, host_kvm, host_ctxt, 1);
+	DECLARE_REG(unsigned long, vm_hva, host_ctxt, 2);
+	DECLARE_REG(unsigned long, pgd_hva, host_ctxt, 3);
+
+	host_kvm = kern_hyp_va(host_kvm);
+	cpu_reg(host_ctxt, 1) = __pkvm_init_vm(host_kvm, vm_hva, pgd_hva);
+}
+
+static void handle___pkvm_init_vcpu(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+	DECLARE_REG(struct kvm_vcpu *, host_vcpu, host_ctxt, 2);
+	DECLARE_REG(unsigned long, vcpu_hva, host_ctxt, 3);
+
+	host_vcpu = kern_hyp_va(host_vcpu);
+	cpu_reg(host_ctxt, 1) = __pkvm_init_vcpu(handle, host_vcpu, vcpu_hva);
+}
+
+static void handle___pkvm_teardown_vm(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(pkvm_handle_t, handle, host_ctxt, 1);
+
+	cpu_reg(host_ctxt, 1) = __pkvm_teardown_vm(handle);
+}
+
+typedef void (*hcall_t)(struct kvm_cpu_context *);
+
+#define HANDLE_FUNC(x)	[__KVM_HOST_SMCCC_FUNC_##x] = (hcall_t)handle_##x
+
+static const hcall_t host_hcall[] = {
+	/* ___kvm_hyp_init */
+	HANDLE_FUNC(__kvm_get_mdcr_el2),
+	HANDLE_FUNC(__pkvm_init),
+	HANDLE_FUNC(__pkvm_create_private_mapping),
+	HANDLE_FUNC(__pkvm_cpu_set_vector),
+	HANDLE_FUNC(__kvm_enable_ssbs),
+	HANDLE_FUNC(__vgic_v3_init_lrs),
+	HANDLE_FUNC(__vgic_v3_get_gic_config),
+	HANDLE_FUNC(__pkvm_prot_finalize),
+
+	HANDLE_FUNC(__pkvm_host_share_hyp),
+	HANDLE_FUNC(__pkvm_host_unshare_hyp),
+	HANDLE_FUNC(__kvm_adjust_pc),
+	HANDLE_FUNC(__kvm_vcpu_run),
+	HANDLE_FUNC(__kvm_flush_vm_context),
+	HANDLE_FUNC(__kvm_tlb_flush_vmid_ipa),
+	HANDLE_FUNC(__kvm_tlb_flush_vmid_ipa_nsh),
+	HANDLE_FUNC(__kvm_tlb_flush_vmid),
+	HANDLE_FUNC(__kvm_tlb_flush_vmid_range),
+	HANDLE_FUNC(__kvm_flush_cpu_context),
+	HANDLE_FUNC(__kvm_timer_set_cntvoff),
+	HANDLE_FUNC(__vgic_v3_read_vmcr),
+	HANDLE_FUNC(__vgic_v3_write_vmcr),
+	HANDLE_FUNC(__vgic_v3_save_aprs),
+	HANDLE_FUNC(__vgic_v3_restore_aprs),
+	HANDLE_FUNC(__pkvm_vcpu_init_traps),
+	HANDLE_FUNC(__pkvm_init_vm),
+	HANDLE_FUNC(__pkvm_init_vcpu),
+	HANDLE_FUNC(__pkvm_teardown_vm),
+};
+
+static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(unsigned long, id, host_ctxt, 0);
+	unsigned long hcall_min = 0;
+	hcall_t hfn;
+
+	/*
+	 * If pKVM has been initialised then reject any calls to the
+	 * early "privileged" hypercalls. Note that we cannot reject
+	 * calls to __pkvm_prot_finalize for two reasons: (1) The static
+	 * key used to determine initialisation must be toggled prior to
+	 * finalisation and (2) finalisation is performed on a per-CPU
+	 * basis. This is all fine, however, since __pkvm_prot_finalize
+	 * returns -EPERM after the first call for a given CPU.
+	 */
+	if (static_branch_unlikely(&kvm_protected_mode_initialized))
+		hcall_min = __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize;
+
+	id &= ~ARM_SMCCC_CALL_HINTS;
+	id -= KVM_HOST_SMCCC_ID(0);
+
+	if (unlikely(id < hcall_min || id >= ARRAY_SIZE(host_hcall)))
+		goto inval;
+
+	hfn = host_hcall[id];
+	if (unlikely(!hfn))
+		goto inval;
+
+	cpu_reg(host_ctxt, 0) = SMCCC_RET_SUCCESS;
+	hfn(host_ctxt);
+
+	return;
+inval:
+	cpu_reg(host_ctxt, 0) = SMCCC_RET_NOT_SUPPORTED;
+}
+
+static void default_host_smc_handler(struct kvm_cpu_context *host_ctxt)
+{
+	__kvm_hyp_host_forward_smc(host_ctxt);
+}
+
+static void handle_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, func_id, host_ctxt, 0);
+	bool handled;
+
+	func_id &= ~ARM_SMCCC_CALL_HINTS;
+
+	handled = kvm_host_psci_handler(host_ctxt, func_id);
+	if (!handled)
+		handled = kvm_host_ffa_handler(host_ctxt, func_id);
+	if (!handled)
+		default_host_smc_handler(host_ctxt);
+
+	/* SMC was trapped, move ELR past the current PC. */
+	kvm_skip_host_instr();
+}
+
+void handle_trap(struct kvm_cpu_context *host_ctxt)
+{
+	u64 esr = read_sysreg_el2(SYS_ESR);
+
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_HVC64:
+		handle_host_hcall(host_ctxt);
+		break;
+	case ESR_ELx_EC_SMC64:
+		handle_host_smc(host_ctxt);
+		break;
+	case ESR_ELx_EC_SVE:
+		if (has_hvhe())
+			sysreg_clear_set(cpacr_el1, 0, (CPACR_EL1_ZEN_EL1EN |
+							CPACR_EL1_ZEN_EL0EN));
+		else
+			sysreg_clear_set(cptr_el2, CPTR_EL2_TZ, 0);
+		isb();
+		sve_cond_update_zcr_vq(ZCR_ELx_LEN_MASK, SYS_ZCR_EL2);
+		break;
+	case ESR_ELx_EC_IABT_LOW:
+	case ESR_ELx_EC_DABT_LOW:
+		handle_host_mem_abort(host_ctxt);
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-smp.c b/arch/arm64/kvm/hyp/nvhe/hyp-smp.c
new file mode 100644
index 000000000..04d194583
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-smp.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 - Google LLC
+ * Author: David Brazdil <dbrazdil@google.com>
+ */
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+/*
+ * nVHE copy of data structures tracking available CPU cores.
+ * Only entries for CPUs that were online at KVM init are populated.
+ * Other CPUs should not be allowed to boot because their features were
+ * not checked against the finalized system capabilities.
+ */
+u64 __ro_after_init hyp_cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_HWID };
+
+u64 cpu_logical_map(unsigned int cpu)
+{
+	BUG_ON(cpu >= ARRAY_SIZE(hyp_cpu_logical_map));
+
+	return hyp_cpu_logical_map[cpu];
+}
+
+unsigned long __ro_after_init kvm_arm_hyp_percpu_base[NR_CPUS];
+
+unsigned long __hyp_per_cpu_offset(unsigned int cpu)
+{
+	unsigned long *cpu_base_array;
+	unsigned long this_cpu_base;
+	unsigned long elf_base;
+
+	BUG_ON(cpu >= ARRAY_SIZE(kvm_arm_hyp_percpu_base));
+
+	cpu_base_array = (unsigned long *)&kvm_arm_hyp_percpu_base;
+	this_cpu_base = kern_hyp_va(cpu_base_array[cpu]);
+	elf_base = (unsigned long)&__per_cpu_start;
+	return this_cpu_base - elf_base;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp.lds.S b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
new file mode 100644
index 000000000..f4562f417
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/hyp.lds.S
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Google LLC.
+ * Written by David Brazdil <dbrazdil@google.com>
+ *
+ * Linker script used for partial linking of nVHE EL2 object files.
+ */
+
+#include <asm/hyp_image.h>
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/memory.h>
+
+SECTIONS {
+	HYP_SECTION(.idmap.text)
+	HYP_SECTION(.text)
+	HYP_SECTION(.data..ro_after_init)
+	HYP_SECTION(.rodata)
+
+	/*
+	 * .hyp..data..percpu needs to be page aligned to maintain the same
+	 * alignment for when linking into vmlinux.
+	 */
+	. = ALIGN(PAGE_SIZE);
+	BEGIN_HYP_SECTION(.data..percpu)
+		PERCPU_INPUT(L1_CACHE_BYTES)
+	END_HYP_SECTION
+	HYP_SECTION(.bss)
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/list_debug.c b/arch/arm64/kvm/hyp/nvhe/list_debug.c
new file mode 100644
index 000000000..46a2d4f2b
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/list_debug.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 - Google LLC
+ * Author: Keir Fraser <keirf@google.com>
+ */
+
+#include <linux/list.h>
+#include <linux/bug.h>
+
+static inline __must_check bool nvhe_check_data_corruption(bool v)
+{
+	return v;
+}
+
+#define NVHE_CHECK_DATA_CORRUPTION(condition)				 \
+	nvhe_check_data_corruption(({					 \
+		bool corruption = unlikely(condition);			 \
+		if (corruption) {					 \
+			if (IS_ENABLED(CONFIG_BUG_ON_DATA_CORRUPTION)) { \
+				BUG_ON(1);				 \
+			} else						 \
+				WARN_ON(1);				 \
+		}							 \
+		corruption;						 \
+	}))
+
+/* The predicates checked here are taken from lib/list_debug.c. */
+
+__list_valid_slowpath
+bool __list_add_valid_or_report(struct list_head *new, struct list_head *prev,
+				struct list_head *next)
+{
+	if (NVHE_CHECK_DATA_CORRUPTION(next->prev != prev) ||
+	    NVHE_CHECK_DATA_CORRUPTION(prev->next != next) ||
+	    NVHE_CHECK_DATA_CORRUPTION(new == prev || new == next))
+		return false;
+
+	return true;
+}
+
+__list_valid_slowpath
+bool __list_del_entry_valid_or_report(struct list_head *entry)
+{
+	struct list_head *prev, *next;
+
+	prev = entry->prev;
+	next = entry->next;
+
+	if (NVHE_CHECK_DATA_CORRUPTION(next == LIST_POISON1) ||
+	    NVHE_CHECK_DATA_CORRUPTION(prev == LIST_POISON2) ||
+	    NVHE_CHECK_DATA_CORRUPTION(prev->next != entry) ||
+	    NVHE_CHECK_DATA_CORRUPTION(next->prev != entry))
+		return false;
+
+	return true;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
new file mode 100644
index 000000000..9d7034412
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -0,0 +1,1305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_pgtable.h>
+#include <asm/kvm_pkvm.h>
+#include <asm/stage2_pgtable.h>
+
+#include <hyp/fault.h>
+
+#include <nvhe/gfp.h>
+#include <nvhe/memory.h>
+#include <nvhe/mem_protect.h>
+#include <nvhe/mm.h>
+
+#define KVM_HOST_S2_FLAGS (KVM_PGTABLE_S2_NOFWB | KVM_PGTABLE_S2_IDMAP)
+
+struct host_mmu host_mmu;
+
+static struct hyp_pool host_s2_pool;
+
+static DEFINE_PER_CPU(struct pkvm_hyp_vm *, __current_vm);
+#define current_vm (*this_cpu_ptr(&__current_vm))
+
+static void guest_lock_component(struct pkvm_hyp_vm *vm)
+{
+	hyp_spin_lock(&vm->lock);
+	current_vm = vm;
+}
+
+static void guest_unlock_component(struct pkvm_hyp_vm *vm)
+{
+	current_vm = NULL;
+	hyp_spin_unlock(&vm->lock);
+}
+
+static void host_lock_component(void)
+{
+	hyp_spin_lock(&host_mmu.lock);
+}
+
+static void host_unlock_component(void)
+{
+	hyp_spin_unlock(&host_mmu.lock);
+}
+
+static void hyp_lock_component(void)
+{
+	hyp_spin_lock(&pkvm_pgd_lock);
+}
+
+static void hyp_unlock_component(void)
+{
+	hyp_spin_unlock(&pkvm_pgd_lock);
+}
+
+static void *host_s2_zalloc_pages_exact(size_t size)
+{
+	void *addr = hyp_alloc_pages(&host_s2_pool, get_order(size));
+
+	hyp_split_page(hyp_virt_to_page(addr));
+
+	/*
+	 * The size of concatenated PGDs is always a power of two of PAGE_SIZE,
+	 * so there should be no need to free any of the tail pages to make the
+	 * allocation exact.
+	 */
+	WARN_ON(size != (PAGE_SIZE << get_order(size)));
+
+	return addr;
+}
+
+static void *host_s2_zalloc_page(void *pool)
+{
+	return hyp_alloc_pages(pool, 0);
+}
+
+static void host_s2_get_page(void *addr)
+{
+	hyp_get_page(&host_s2_pool, addr);
+}
+
+static void host_s2_put_page(void *addr)
+{
+	hyp_put_page(&host_s2_pool, addr);
+}
+
+static void host_s2_free_unlinked_table(void *addr, u32 level)
+{
+	kvm_pgtable_stage2_free_unlinked(&host_mmu.mm_ops, addr, level);
+}
+
+static int prepare_s2_pool(void *pgt_pool_base)
+{
+	unsigned long nr_pages, pfn;
+	int ret;
+
+	pfn = hyp_virt_to_pfn(pgt_pool_base);
+	nr_pages = host_s2_pgtable_pages();
+	ret = hyp_pool_init(&host_s2_pool, pfn, nr_pages, 0);
+	if (ret)
+		return ret;
+
+	host_mmu.mm_ops = (struct kvm_pgtable_mm_ops) {
+		.zalloc_pages_exact = host_s2_zalloc_pages_exact,
+		.zalloc_page = host_s2_zalloc_page,
+		.free_unlinked_table = host_s2_free_unlinked_table,
+		.phys_to_virt = hyp_phys_to_virt,
+		.virt_to_phys = hyp_virt_to_phys,
+		.page_count = hyp_page_count,
+		.get_page = host_s2_get_page,
+		.put_page = host_s2_put_page,
+	};
+
+	return 0;
+}
+
+static void prepare_host_vtcr(void)
+{
+	u32 parange, phys_shift;
+
+	/* The host stage 2 is id-mapped, so use parange for T0SZ */
+	parange = kvm_get_parange(id_aa64mmfr0_el1_sys_val);
+	phys_shift = id_aa64mmfr0_parange_to_phys_shift(parange);
+
+	host_mmu.arch.vtcr = kvm_get_vtcr(id_aa64mmfr0_el1_sys_val,
+					  id_aa64mmfr1_el1_sys_val, phys_shift);
+}
+
+static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot);
+
+int kvm_host_prepare_stage2(void *pgt_pool_base)
+{
+	struct kvm_s2_mmu *mmu = &host_mmu.arch.mmu;
+	int ret;
+
+	prepare_host_vtcr();
+	hyp_spin_lock_init(&host_mmu.lock);
+	mmu->arch = &host_mmu.arch;
+
+	ret = prepare_s2_pool(pgt_pool_base);
+	if (ret)
+		return ret;
+
+	ret = __kvm_pgtable_stage2_init(&host_mmu.pgt, mmu,
+					&host_mmu.mm_ops, KVM_HOST_S2_FLAGS,
+					host_stage2_force_pte_cb);
+	if (ret)
+		return ret;
+
+	mmu->pgd_phys = __hyp_pa(host_mmu.pgt.pgd);
+	mmu->pgt = &host_mmu.pgt;
+	atomic64_set(&mmu->vmid.id, 0);
+
+	return 0;
+}
+
+static bool guest_stage2_force_pte_cb(u64 addr, u64 end,
+				      enum kvm_pgtable_prot prot)
+{
+	return true;
+}
+
+static void *guest_s2_zalloc_pages_exact(size_t size)
+{
+	void *addr = hyp_alloc_pages(&current_vm->pool, get_order(size));
+
+	WARN_ON(size != (PAGE_SIZE << get_order(size)));
+	hyp_split_page(hyp_virt_to_page(addr));
+
+	return addr;
+}
+
+static void guest_s2_free_pages_exact(void *addr, unsigned long size)
+{
+	u8 order = get_order(size);
+	unsigned int i;
+
+	for (i = 0; i < (1 << order); i++)
+		hyp_put_page(&current_vm->pool, addr + (i * PAGE_SIZE));
+}
+
+static void *guest_s2_zalloc_page(void *mc)
+{
+	struct hyp_page *p;
+	void *addr;
+
+	addr = hyp_alloc_pages(&current_vm->pool, 0);
+	if (addr)
+		return addr;
+
+	addr = pop_hyp_memcache(mc, hyp_phys_to_virt);
+	if (!addr)
+		return addr;
+
+	memset(addr, 0, PAGE_SIZE);
+	p = hyp_virt_to_page(addr);
+	memset(p, 0, sizeof(*p));
+	p->refcount = 1;
+
+	return addr;
+}
+
+static void guest_s2_get_page(void *addr)
+{
+	hyp_get_page(&current_vm->pool, addr);
+}
+
+static void guest_s2_put_page(void *addr)
+{
+	hyp_put_page(&current_vm->pool, addr);
+}
+
+static void clean_dcache_guest_page(void *va, size_t size)
+{
+	__clean_dcache_guest_page(hyp_fixmap_map(__hyp_pa(va)), size);
+	hyp_fixmap_unmap();
+}
+
+static void invalidate_icache_guest_page(void *va, size_t size)
+{
+	__invalidate_icache_guest_page(hyp_fixmap_map(__hyp_pa(va)), size);
+	hyp_fixmap_unmap();
+}
+
+int kvm_guest_prepare_stage2(struct pkvm_hyp_vm *vm, void *pgd)
+{
+	struct kvm_s2_mmu *mmu = &vm->kvm.arch.mmu;
+	unsigned long nr_pages;
+	int ret;
+
+	nr_pages = kvm_pgtable_stage2_pgd_size(vm->kvm.arch.vtcr) >> PAGE_SHIFT;
+	ret = hyp_pool_init(&vm->pool, hyp_virt_to_pfn(pgd), nr_pages, 0);
+	if (ret)
+		return ret;
+
+	hyp_spin_lock_init(&vm->lock);
+	vm->mm_ops = (struct kvm_pgtable_mm_ops) {
+		.zalloc_pages_exact	= guest_s2_zalloc_pages_exact,
+		.free_pages_exact	= guest_s2_free_pages_exact,
+		.zalloc_page		= guest_s2_zalloc_page,
+		.phys_to_virt		= hyp_phys_to_virt,
+		.virt_to_phys		= hyp_virt_to_phys,
+		.page_count		= hyp_page_count,
+		.get_page		= guest_s2_get_page,
+		.put_page		= guest_s2_put_page,
+		.dcache_clean_inval_poc	= clean_dcache_guest_page,
+		.icache_inval_pou	= invalidate_icache_guest_page,
+	};
+
+	guest_lock_component(vm);
+	ret = __kvm_pgtable_stage2_init(mmu->pgt, mmu, &vm->mm_ops, 0,
+					guest_stage2_force_pte_cb);
+	guest_unlock_component(vm);
+	if (ret)
+		return ret;
+
+	vm->kvm.arch.mmu.pgd_phys = __hyp_pa(vm->pgt.pgd);
+
+	return 0;
+}
+
+void reclaim_guest_pages(struct pkvm_hyp_vm *vm, struct kvm_hyp_memcache *mc)
+{
+	void *addr;
+
+	/* Dump all pgtable pages in the hyp_pool */
+	guest_lock_component(vm);
+	kvm_pgtable_stage2_destroy(&vm->pgt);
+	vm->kvm.arch.mmu.pgd_phys = 0ULL;
+	guest_unlock_component(vm);
+
+	/* Drain the hyp_pool into the memcache */
+	addr = hyp_alloc_pages(&vm->pool, 0);
+	while (addr) {
+		memset(hyp_virt_to_page(addr), 0, sizeof(struct hyp_page));
+		push_hyp_memcache(mc, addr, hyp_virt_to_phys);
+		WARN_ON(__pkvm_hyp_donate_host(hyp_virt_to_pfn(addr), 1));
+		addr = hyp_alloc_pages(&vm->pool, 0);
+	}
+}
+
+int __pkvm_prot_finalize(void)
+{
+	struct kvm_s2_mmu *mmu = &host_mmu.arch.mmu;
+	struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params);
+
+	if (params->hcr_el2 & HCR_VM)
+		return -EPERM;
+
+	params->vttbr = kvm_get_vttbr(mmu);
+	params->vtcr = host_mmu.arch.vtcr;
+	params->hcr_el2 |= HCR_VM;
+
+	/*
+	 * The CMO below not only cleans the updated params to the
+	 * PoC, but also provides the DSB that ensures ongoing
+	 * page-table walks that have started before we trapped to EL2
+	 * have completed.
+	 */
+	kvm_flush_dcache_to_poc(params, sizeof(*params));
+
+	write_sysreg(params->hcr_el2, hcr_el2);
+	__load_stage2(&host_mmu.arch.mmu, &host_mmu.arch);
+
+	/*
+	 * Make sure to have an ISB before the TLB maintenance below but only
+	 * when __load_stage2() doesn't include one already.
+	 */
+	asm(ALTERNATIVE("isb", "nop", ARM64_WORKAROUND_SPECULATIVE_AT));
+
+	/* Invalidate stale HCR bits that may be cached in TLBs */
+	__tlbi(vmalls12e1);
+	dsb(nsh);
+	isb();
+
+	return 0;
+}
+
+static int host_stage2_unmap_dev_all(void)
+{
+	struct kvm_pgtable *pgt = &host_mmu.pgt;
+	struct memblock_region *reg;
+	u64 addr = 0;
+	int i, ret;
+
+	/* Unmap all non-memory regions to recycle the pages */
+	for (i = 0; i < hyp_memblock_nr; i++, addr = reg->base + reg->size) {
+		reg = &hyp_memory[i];
+		ret = kvm_pgtable_stage2_unmap(pgt, addr, reg->base - addr);
+		if (ret)
+			return ret;
+	}
+	return kvm_pgtable_stage2_unmap(pgt, addr, BIT(pgt->ia_bits) - addr);
+}
+
+struct kvm_mem_range {
+	u64 start;
+	u64 end;
+};
+
+static struct memblock_region *find_mem_range(phys_addr_t addr, struct kvm_mem_range *range)
+{
+	int cur, left = 0, right = hyp_memblock_nr;
+	struct memblock_region *reg;
+	phys_addr_t end;
+
+	range->start = 0;
+	range->end = ULONG_MAX;
+
+	/* The list of memblock regions is sorted, binary search it */
+	while (left < right) {
+		cur = (left + right) >> 1;
+		reg = &hyp_memory[cur];
+		end = reg->base + reg->size;
+		if (addr < reg->base) {
+			right = cur;
+			range->end = reg->base;
+		} else if (addr >= end) {
+			left = cur + 1;
+			range->start = end;
+		} else {
+			range->start = reg->base;
+			range->end = end;
+			return reg;
+		}
+	}
+
+	return NULL;
+}
+
+bool addr_is_memory(phys_addr_t phys)
+{
+	struct kvm_mem_range range;
+
+	return !!find_mem_range(phys, &range);
+}
+
+static bool addr_is_allowed_memory(phys_addr_t phys)
+{
+	struct memblock_region *reg;
+	struct kvm_mem_range range;
+
+	reg = find_mem_range(phys, &range);
+
+	return reg && !(reg->flags & MEMBLOCK_NOMAP);
+}
+
+static bool is_in_mem_range(u64 addr, struct kvm_mem_range *range)
+{
+	return range->start <= addr && addr < range->end;
+}
+
+static bool range_is_memory(u64 start, u64 end)
+{
+	struct kvm_mem_range r;
+
+	if (!find_mem_range(start, &r))
+		return false;
+
+	return is_in_mem_range(end - 1, &r);
+}
+
+static inline int __host_stage2_idmap(u64 start, u64 end,
+				      enum kvm_pgtable_prot prot)
+{
+	return kvm_pgtable_stage2_map(&host_mmu.pgt, start, end - start, start,
+				      prot, &host_s2_pool, 0);
+}
+
+/*
+ * The pool has been provided with enough pages to cover all of memory with
+ * page granularity, but it is difficult to know how much of the MMIO range
+ * we will need to cover upfront, so we may need to 'recycle' the pages if we
+ * run out.
+ */
+#define host_stage2_try(fn, ...)					\
+	({								\
+		int __ret;						\
+		hyp_assert_lock_held(&host_mmu.lock);			\
+		__ret = fn(__VA_ARGS__);				\
+		if (__ret == -ENOMEM) {					\
+			__ret = host_stage2_unmap_dev_all();		\
+			if (!__ret)					\
+				__ret = fn(__VA_ARGS__);		\
+		}							\
+		__ret;							\
+	 })
+
+static inline bool range_included(struct kvm_mem_range *child,
+				  struct kvm_mem_range *parent)
+{
+	return parent->start <= child->start && child->end <= parent->end;
+}
+
+static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
+{
+	struct kvm_mem_range cur;
+	kvm_pte_t pte;
+	u32 level;
+	int ret;
+
+	hyp_assert_lock_held(&host_mmu.lock);
+	ret = kvm_pgtable_get_leaf(&host_mmu.pgt, addr, &pte, &level);
+	if (ret)
+		return ret;
+
+	if (kvm_pte_valid(pte))
+		return -EAGAIN;
+
+	if (pte)
+		return -EPERM;
+
+	do {
+		u64 granule = kvm_granule_size(level);
+		cur.start = ALIGN_DOWN(addr, granule);
+		cur.end = cur.start + granule;
+		level++;
+	} while ((level < KVM_PGTABLE_MAX_LEVELS) &&
+			!(kvm_level_supports_block_mapping(level) &&
+			  range_included(&cur, range)));
+
+	*range = cur;
+
+	return 0;
+}
+
+int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
+			     enum kvm_pgtable_prot prot)
+{
+	return host_stage2_try(__host_stage2_idmap, addr, addr + size, prot);
+}
+
+int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id)
+{
+	return host_stage2_try(kvm_pgtable_stage2_set_owner, &host_mmu.pgt,
+			       addr, size, &host_s2_pool, owner_id);
+}
+
+static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot)
+{
+	/*
+	 * Block mappings must be used with care in the host stage-2 as a
+	 * kvm_pgtable_stage2_map() operation targeting a page in the range of
+	 * an existing block will delete the block under the assumption that
+	 * mappings in the rest of the block range can always be rebuilt lazily.
+	 * That assumption is correct for the host stage-2 with RWX mappings
+	 * targeting memory or RW mappings targeting MMIO ranges (see
+	 * host_stage2_idmap() below which implements some of the host memory
+	 * abort logic). However, this is not safe for any other mappings where
+	 * the host stage-2 page-table is in fact the only place where this
+	 * state is stored. In all those cases, it is safer to use page-level
+	 * mappings, hence avoiding to lose the state because of side-effects in
+	 * kvm_pgtable_stage2_map().
+	 */
+	if (range_is_memory(addr, end))
+		return prot != PKVM_HOST_MEM_PROT;
+	else
+		return prot != PKVM_HOST_MMIO_PROT;
+}
+
+static int host_stage2_idmap(u64 addr)
+{
+	struct kvm_mem_range range;
+	bool is_memory = !!find_mem_range(addr, &range);
+	enum kvm_pgtable_prot prot;
+	int ret;
+
+	prot = is_memory ? PKVM_HOST_MEM_PROT : PKVM_HOST_MMIO_PROT;
+
+	host_lock_component();
+	ret = host_stage2_adjust_range(addr, &range);
+	if (ret)
+		goto unlock;
+
+	ret = host_stage2_idmap_locked(range.start, range.end - range.start, prot);
+unlock:
+	host_unlock_component();
+
+	return ret;
+}
+
+void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt)
+{
+	struct kvm_vcpu_fault_info fault;
+	u64 esr, addr;
+	int ret = 0;
+
+	esr = read_sysreg_el2(SYS_ESR);
+	BUG_ON(!__get_fault_info(esr, &fault));
+
+	addr = (fault.hpfar_el2 & HPFAR_MASK) << 8;
+	ret = host_stage2_idmap(addr);
+	BUG_ON(ret && ret != -EAGAIN);
+}
+
+struct pkvm_mem_transition {
+	u64				nr_pages;
+
+	struct {
+		enum pkvm_component_id	id;
+		/* Address in the initiator's address space */
+		u64			addr;
+
+		union {
+			struct {
+				/* Address in the completer's address space */
+				u64	completer_addr;
+			} host;
+			struct {
+				u64	completer_addr;
+			} hyp;
+		};
+	} initiator;
+
+	struct {
+		enum pkvm_component_id	id;
+	} completer;
+};
+
+struct pkvm_mem_share {
+	const struct pkvm_mem_transition	tx;
+	const enum kvm_pgtable_prot		completer_prot;
+};
+
+struct pkvm_mem_donation {
+	const struct pkvm_mem_transition	tx;
+};
+
+struct check_walk_data {
+	enum pkvm_page_state	desired;
+	enum pkvm_page_state	(*get_page_state)(kvm_pte_t pte, u64 addr);
+};
+
+static int __check_page_state_visitor(const struct kvm_pgtable_visit_ctx *ctx,
+				      enum kvm_pgtable_walk_flags visit)
+{
+	struct check_walk_data *d = ctx->arg;
+
+	return d->get_page_state(ctx->old, ctx->addr) == d->desired ? 0 : -EPERM;
+}
+
+static int check_page_state_range(struct kvm_pgtable *pgt, u64 addr, u64 size,
+				  struct check_walk_data *data)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= __check_page_state_visitor,
+		.arg	= data,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+	};
+
+	return kvm_pgtable_walk(pgt, addr, size, &walker);
+}
+
+static enum pkvm_page_state host_get_page_state(kvm_pte_t pte, u64 addr)
+{
+	if (!addr_is_allowed_memory(addr))
+		return PKVM_NOPAGE;
+
+	if (!kvm_pte_valid(pte) && pte)
+		return PKVM_NOPAGE;
+
+	return pkvm_getstate(kvm_pgtable_stage2_pte_prot(pte));
+}
+
+static int __host_check_page_state_range(u64 addr, u64 size,
+					 enum pkvm_page_state state)
+{
+	struct check_walk_data d = {
+		.desired	= state,
+		.get_page_state	= host_get_page_state,
+	};
+
+	hyp_assert_lock_held(&host_mmu.lock);
+	return check_page_state_range(&host_mmu.pgt, addr, size, &d);
+}
+
+static int __host_set_page_state_range(u64 addr, u64 size,
+				       enum pkvm_page_state state)
+{
+	enum kvm_pgtable_prot prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, state);
+
+	return host_stage2_idmap_locked(addr, size, prot);
+}
+
+static int host_request_owned_transition(u64 *completer_addr,
+					 const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 addr = tx->initiator.addr;
+
+	*completer_addr = tx->initiator.host.completer_addr;
+	return __host_check_page_state_range(addr, size, PKVM_PAGE_OWNED);
+}
+
+static int host_request_unshare(u64 *completer_addr,
+				const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 addr = tx->initiator.addr;
+
+	*completer_addr = tx->initiator.host.completer_addr;
+	return __host_check_page_state_range(addr, size, PKVM_PAGE_SHARED_OWNED);
+}
+
+static int host_initiate_share(u64 *completer_addr,
+			       const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 addr = tx->initiator.addr;
+
+	*completer_addr = tx->initiator.host.completer_addr;
+	return __host_set_page_state_range(addr, size, PKVM_PAGE_SHARED_OWNED);
+}
+
+static int host_initiate_unshare(u64 *completer_addr,
+				 const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 addr = tx->initiator.addr;
+
+	*completer_addr = tx->initiator.host.completer_addr;
+	return __host_set_page_state_range(addr, size, PKVM_PAGE_OWNED);
+}
+
+static int host_initiate_donation(u64 *completer_addr,
+				  const struct pkvm_mem_transition *tx)
+{
+	u8 owner_id = tx->completer.id;
+	u64 size = tx->nr_pages * PAGE_SIZE;
+
+	*completer_addr = tx->initiator.host.completer_addr;
+	return host_stage2_set_owner_locked(tx->initiator.addr, size, owner_id);
+}
+
+static bool __host_ack_skip_pgtable_check(const struct pkvm_mem_transition *tx)
+{
+	return !(IS_ENABLED(CONFIG_NVHE_EL2_DEBUG) ||
+		 tx->initiator.id != PKVM_ID_HYP);
+}
+
+static int __host_ack_transition(u64 addr, const struct pkvm_mem_transition *tx,
+				 enum pkvm_page_state state)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+
+	if (__host_ack_skip_pgtable_check(tx))
+		return 0;
+
+	return __host_check_page_state_range(addr, size, state);
+}
+
+static int host_ack_donation(u64 addr, const struct pkvm_mem_transition *tx)
+{
+	return __host_ack_transition(addr, tx, PKVM_NOPAGE);
+}
+
+static int host_complete_donation(u64 addr, const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	u8 host_id = tx->completer.id;
+
+	return host_stage2_set_owner_locked(addr, size, host_id);
+}
+
+static enum pkvm_page_state hyp_get_page_state(kvm_pte_t pte, u64 addr)
+{
+	if (!kvm_pte_valid(pte))
+		return PKVM_NOPAGE;
+
+	return pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte));
+}
+
+static int __hyp_check_page_state_range(u64 addr, u64 size,
+					enum pkvm_page_state state)
+{
+	struct check_walk_data d = {
+		.desired	= state,
+		.get_page_state	= hyp_get_page_state,
+	};
+
+	hyp_assert_lock_held(&pkvm_pgd_lock);
+	return check_page_state_range(&pkvm_pgtable, addr, size, &d);
+}
+
+static int hyp_request_donation(u64 *completer_addr,
+				const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	u64 addr = tx->initiator.addr;
+
+	*completer_addr = tx->initiator.hyp.completer_addr;
+	return __hyp_check_page_state_range(addr, size, PKVM_PAGE_OWNED);
+}
+
+static int hyp_initiate_donation(u64 *completer_addr,
+				 const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	int ret;
+
+	*completer_addr = tx->initiator.hyp.completer_addr;
+	ret = kvm_pgtable_hyp_unmap(&pkvm_pgtable, tx->initiator.addr, size);
+	return (ret != size) ? -EFAULT : 0;
+}
+
+static bool __hyp_ack_skip_pgtable_check(const struct pkvm_mem_transition *tx)
+{
+	return !(IS_ENABLED(CONFIG_NVHE_EL2_DEBUG) ||
+		 tx->initiator.id != PKVM_ID_HOST);
+}
+
+static int hyp_ack_share(u64 addr, const struct pkvm_mem_transition *tx,
+			 enum kvm_pgtable_prot perms)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+
+	if (perms != PAGE_HYP)
+		return -EPERM;
+
+	if (__hyp_ack_skip_pgtable_check(tx))
+		return 0;
+
+	return __hyp_check_page_state_range(addr, size, PKVM_NOPAGE);
+}
+
+static int hyp_ack_unshare(u64 addr, const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+
+	if (tx->initiator.id == PKVM_ID_HOST && hyp_page_count((void *)addr))
+		return -EBUSY;
+
+	if (__hyp_ack_skip_pgtable_check(tx))
+		return 0;
+
+	return __hyp_check_page_state_range(addr, size,
+					    PKVM_PAGE_SHARED_BORROWED);
+}
+
+static int hyp_ack_donation(u64 addr, const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+
+	if (__hyp_ack_skip_pgtable_check(tx))
+		return 0;
+
+	return __hyp_check_page_state_range(addr, size, PKVM_NOPAGE);
+}
+
+static int hyp_complete_share(u64 addr, const struct pkvm_mem_transition *tx,
+			      enum kvm_pgtable_prot perms)
+{
+	void *start = (void *)addr, *end = start + (tx->nr_pages * PAGE_SIZE);
+	enum kvm_pgtable_prot prot;
+
+	prot = pkvm_mkstate(perms, PKVM_PAGE_SHARED_BORROWED);
+	return pkvm_create_mappings_locked(start, end, prot);
+}
+
+static int hyp_complete_unshare(u64 addr, const struct pkvm_mem_transition *tx)
+{
+	u64 size = tx->nr_pages * PAGE_SIZE;
+	int ret = kvm_pgtable_hyp_unmap(&pkvm_pgtable, addr, size);
+
+	return (ret != size) ? -EFAULT : 0;
+}
+
+static int hyp_complete_donation(u64 addr,
+				 const struct pkvm_mem_transition *tx)
+{
+	void *start = (void *)addr, *end = start + (tx->nr_pages * PAGE_SIZE);
+	enum kvm_pgtable_prot prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_OWNED);
+
+	return pkvm_create_mappings_locked(start, end, prot);
+}
+
+static int check_share(struct pkvm_mem_share *share)
+{
+	const struct pkvm_mem_transition *tx = &share->tx;
+	u64 completer_addr;
+	int ret;
+
+	switch (tx->initiator.id) {
+	case PKVM_ID_HOST:
+		ret = host_request_owned_transition(&completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	switch (tx->completer.id) {
+	case PKVM_ID_HYP:
+		ret = hyp_ack_share(completer_addr, tx, share->completer_prot);
+		break;
+	case PKVM_ID_FFA:
+		/*
+		 * We only check the host; the secure side will check the other
+		 * end when we forward the FFA call.
+		 */
+		ret = 0;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int __do_share(struct pkvm_mem_share *share)
+{
+	const struct pkvm_mem_transition *tx = &share->tx;
+	u64 completer_addr;
+	int ret;
+
+	switch (tx->initiator.id) {
+	case PKVM_ID_HOST:
+		ret = host_initiate_share(&completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	switch (tx->completer.id) {
+	case PKVM_ID_HYP:
+		ret = hyp_complete_share(completer_addr, tx, share->completer_prot);
+		break;
+	case PKVM_ID_FFA:
+		/*
+		 * We're not responsible for any secure page-tables, so there's
+		 * nothing to do here.
+		 */
+		ret = 0;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/*
+ * do_share():
+ *
+ * The page owner grants access to another component with a given set
+ * of permissions.
+ *
+ * Initiator: OWNED	=> SHARED_OWNED
+ * Completer: NOPAGE	=> SHARED_BORROWED
+ */
+static int do_share(struct pkvm_mem_share *share)
+{
+	int ret;
+
+	ret = check_share(share);
+	if (ret)
+		return ret;
+
+	return WARN_ON(__do_share(share));
+}
+
+static int check_unshare(struct pkvm_mem_share *share)
+{
+	const struct pkvm_mem_transition *tx = &share->tx;
+	u64 completer_addr;
+	int ret;
+
+	switch (tx->initiator.id) {
+	case PKVM_ID_HOST:
+		ret = host_request_unshare(&completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	switch (tx->completer.id) {
+	case PKVM_ID_HYP:
+		ret = hyp_ack_unshare(completer_addr, tx);
+		break;
+	case PKVM_ID_FFA:
+		/* See check_share() */
+		ret = 0;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int __do_unshare(struct pkvm_mem_share *share)
+{
+	const struct pkvm_mem_transition *tx = &share->tx;
+	u64 completer_addr;
+	int ret;
+
+	switch (tx->initiator.id) {
+	case PKVM_ID_HOST:
+		ret = host_initiate_unshare(&completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	switch (tx->completer.id) {
+	case PKVM_ID_HYP:
+		ret = hyp_complete_unshare(completer_addr, tx);
+		break;
+	case PKVM_ID_FFA:
+		/* See __do_share() */
+		ret = 0;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/*
+ * do_unshare():
+ *
+ * The page owner revokes access from another component for a range of
+ * pages which were previously shared using do_share().
+ *
+ * Initiator: SHARED_OWNED	=> OWNED
+ * Completer: SHARED_BORROWED	=> NOPAGE
+ */
+static int do_unshare(struct pkvm_mem_share *share)
+{
+	int ret;
+
+	ret = check_unshare(share);
+	if (ret)
+		return ret;
+
+	return WARN_ON(__do_unshare(share));
+}
+
+static int check_donation(struct pkvm_mem_donation *donation)
+{
+	const struct pkvm_mem_transition *tx = &donation->tx;
+	u64 completer_addr;
+	int ret;
+
+	switch (tx->initiator.id) {
+	case PKVM_ID_HOST:
+		ret = host_request_owned_transition(&completer_addr, tx);
+		break;
+	case PKVM_ID_HYP:
+		ret = hyp_request_donation(&completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	switch (tx->completer.id) {
+	case PKVM_ID_HOST:
+		ret = host_ack_donation(completer_addr, tx);
+		break;
+	case PKVM_ID_HYP:
+		ret = hyp_ack_donation(completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int __do_donate(struct pkvm_mem_donation *donation)
+{
+	const struct pkvm_mem_transition *tx = &donation->tx;
+	u64 completer_addr;
+	int ret;
+
+	switch (tx->initiator.id) {
+	case PKVM_ID_HOST:
+		ret = host_initiate_donation(&completer_addr, tx);
+		break;
+	case PKVM_ID_HYP:
+		ret = hyp_initiate_donation(&completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	switch (tx->completer.id) {
+	case PKVM_ID_HOST:
+		ret = host_complete_donation(completer_addr, tx);
+		break;
+	case PKVM_ID_HYP:
+		ret = hyp_complete_donation(completer_addr, tx);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+/*
+ * do_donate():
+ *
+ * The page owner transfers ownership to another component, losing access
+ * as a consequence.
+ *
+ * Initiator: OWNED	=> NOPAGE
+ * Completer: NOPAGE	=> OWNED
+ */
+static int do_donate(struct pkvm_mem_donation *donation)
+{
+	int ret;
+
+	ret = check_donation(donation);
+	if (ret)
+		return ret;
+
+	return WARN_ON(__do_donate(donation));
+}
+
+int __pkvm_host_share_hyp(u64 pfn)
+{
+	int ret;
+	u64 host_addr = hyp_pfn_to_phys(pfn);
+	u64 hyp_addr = (u64)__hyp_va(host_addr);
+	struct pkvm_mem_share share = {
+		.tx	= {
+			.nr_pages	= 1,
+			.initiator	= {
+				.id	= PKVM_ID_HOST,
+				.addr	= host_addr,
+				.host	= {
+					.completer_addr = hyp_addr,
+				},
+			},
+			.completer	= {
+				.id	= PKVM_ID_HYP,
+			},
+		},
+		.completer_prot	= PAGE_HYP,
+	};
+
+	host_lock_component();
+	hyp_lock_component();
+
+	ret = do_share(&share);
+
+	hyp_unlock_component();
+	host_unlock_component();
+
+	return ret;
+}
+
+int __pkvm_host_unshare_hyp(u64 pfn)
+{
+	int ret;
+	u64 host_addr = hyp_pfn_to_phys(pfn);
+	u64 hyp_addr = (u64)__hyp_va(host_addr);
+	struct pkvm_mem_share share = {
+		.tx	= {
+			.nr_pages	= 1,
+			.initiator	= {
+				.id	= PKVM_ID_HOST,
+				.addr	= host_addr,
+				.host	= {
+					.completer_addr = hyp_addr,
+				},
+			},
+			.completer	= {
+				.id	= PKVM_ID_HYP,
+			},
+		},
+		.completer_prot	= PAGE_HYP,
+	};
+
+	host_lock_component();
+	hyp_lock_component();
+
+	ret = do_unshare(&share);
+
+	hyp_unlock_component();
+	host_unlock_component();
+
+	return ret;
+}
+
+int __pkvm_host_donate_hyp(u64 pfn, u64 nr_pages)
+{
+	int ret;
+	u64 host_addr = hyp_pfn_to_phys(pfn);
+	u64 hyp_addr = (u64)__hyp_va(host_addr);
+	struct pkvm_mem_donation donation = {
+		.tx	= {
+			.nr_pages	= nr_pages,
+			.initiator	= {
+				.id	= PKVM_ID_HOST,
+				.addr	= host_addr,
+				.host	= {
+					.completer_addr = hyp_addr,
+				},
+			},
+			.completer	= {
+				.id	= PKVM_ID_HYP,
+			},
+		},
+	};
+
+	host_lock_component();
+	hyp_lock_component();
+
+	ret = do_donate(&donation);
+
+	hyp_unlock_component();
+	host_unlock_component();
+
+	return ret;
+}
+
+int __pkvm_hyp_donate_host(u64 pfn, u64 nr_pages)
+{
+	int ret;
+	u64 host_addr = hyp_pfn_to_phys(pfn);
+	u64 hyp_addr = (u64)__hyp_va(host_addr);
+	struct pkvm_mem_donation donation = {
+		.tx	= {
+			.nr_pages	= nr_pages,
+			.initiator	= {
+				.id	= PKVM_ID_HYP,
+				.addr	= hyp_addr,
+				.hyp	= {
+					.completer_addr = host_addr,
+				},
+			},
+			.completer	= {
+				.id	= PKVM_ID_HOST,
+			},
+		},
+	};
+
+	host_lock_component();
+	hyp_lock_component();
+
+	ret = do_donate(&donation);
+
+	hyp_unlock_component();
+	host_unlock_component();
+
+	return ret;
+}
+
+int hyp_pin_shared_mem(void *from, void *to)
+{
+	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
+	u64 end = PAGE_ALIGN((u64)to);
+	u64 size = end - start;
+	int ret;
+
+	host_lock_component();
+	hyp_lock_component();
+
+	ret = __host_check_page_state_range(__hyp_pa(start), size,
+					    PKVM_PAGE_SHARED_OWNED);
+	if (ret)
+		goto unlock;
+
+	ret = __hyp_check_page_state_range(start, size,
+					   PKVM_PAGE_SHARED_BORROWED);
+	if (ret)
+		goto unlock;
+
+	for (cur = start; cur < end; cur += PAGE_SIZE)
+		hyp_page_ref_inc(hyp_virt_to_page(cur));
+
+unlock:
+	hyp_unlock_component();
+	host_unlock_component();
+
+	return ret;
+}
+
+void hyp_unpin_shared_mem(void *from, void *to)
+{
+	u64 cur, start = ALIGN_DOWN((u64)from, PAGE_SIZE);
+	u64 end = PAGE_ALIGN((u64)to);
+
+	host_lock_component();
+	hyp_lock_component();
+
+	for (cur = start; cur < end; cur += PAGE_SIZE)
+		hyp_page_ref_dec(hyp_virt_to_page(cur));
+
+	hyp_unlock_component();
+	host_unlock_component();
+}
+
+int __pkvm_host_share_ffa(u64 pfn, u64 nr_pages)
+{
+	int ret;
+	struct pkvm_mem_share share = {
+		.tx	= {
+			.nr_pages	= nr_pages,
+			.initiator	= {
+				.id	= PKVM_ID_HOST,
+				.addr	= hyp_pfn_to_phys(pfn),
+			},
+			.completer	= {
+				.id	= PKVM_ID_FFA,
+			},
+		},
+	};
+
+	host_lock_component();
+	ret = do_share(&share);
+	host_unlock_component();
+
+	return ret;
+}
+
+int __pkvm_host_unshare_ffa(u64 pfn, u64 nr_pages)
+{
+	int ret;
+	struct pkvm_mem_share share = {
+		.tx	= {
+			.nr_pages	= nr_pages,
+			.initiator	= {
+				.id	= PKVM_ID_HOST,
+				.addr	= hyp_pfn_to_phys(pfn),
+			},
+			.completer	= {
+				.id	= PKVM_ID_FFA,
+			},
+		},
+	};
+
+	host_lock_component();
+	ret = do_unshare(&share);
+	host_unlock_component();
+
+	return ret;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c
new file mode 100644
index 000000000..65a7a186d
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_pgtable.h>
+#include <asm/kvm_pkvm.h>
+#include <asm/spectre.h>
+
+#include <nvhe/early_alloc.h>
+#include <nvhe/gfp.h>
+#include <nvhe/memory.h>
+#include <nvhe/mem_protect.h>
+#include <nvhe/mm.h>
+#include <nvhe/spinlock.h>
+
+struct kvm_pgtable pkvm_pgtable;
+hyp_spinlock_t pkvm_pgd_lock;
+
+struct memblock_region hyp_memory[HYP_MEMBLOCK_REGIONS];
+unsigned int hyp_memblock_nr;
+
+static u64 __io_map_base;
+
+struct hyp_fixmap_slot {
+	u64 addr;
+	kvm_pte_t *ptep;
+};
+static DEFINE_PER_CPU(struct hyp_fixmap_slot, fixmap_slots);
+
+static int __pkvm_create_mappings(unsigned long start, unsigned long size,
+				  unsigned long phys, enum kvm_pgtable_prot prot)
+{
+	int err;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+	err = kvm_pgtable_hyp_map(&pkvm_pgtable, start, size, phys, prot);
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	return err;
+}
+
+static int __pkvm_alloc_private_va_range(unsigned long start, size_t size)
+{
+	unsigned long cur;
+
+	hyp_assert_lock_held(&pkvm_pgd_lock);
+
+	if (!start || start < __io_map_base)
+		return -EINVAL;
+
+	/* The allocated size is always a multiple of PAGE_SIZE */
+	cur = start + PAGE_ALIGN(size);
+
+	/* Are we overflowing on the vmemmap ? */
+	if (cur > __hyp_vmemmap)
+		return -ENOMEM;
+
+	__io_map_base = cur;
+
+	return 0;
+}
+
+/**
+ * pkvm_alloc_private_va_range - Allocates a private VA range.
+ * @size:	The size of the VA range to reserve.
+ * @haddr:	The hypervisor virtual start address of the allocation.
+ *
+ * The private virtual address (VA) range is allocated above __io_map_base
+ * and aligned based on the order of @size.
+ *
+ * Return: 0 on success or negative error code on failure.
+ */
+int pkvm_alloc_private_va_range(size_t size, unsigned long *haddr)
+{
+	unsigned long addr;
+	int ret;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+	addr = __io_map_base;
+	ret = __pkvm_alloc_private_va_range(addr, size);
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	*haddr = addr;
+
+	return ret;
+}
+
+int __pkvm_create_private_mapping(phys_addr_t phys, size_t size,
+				  enum kvm_pgtable_prot prot,
+				  unsigned long *haddr)
+{
+	unsigned long addr;
+	int err;
+
+	size = PAGE_ALIGN(size + offset_in_page(phys));
+	err = pkvm_alloc_private_va_range(size, &addr);
+	if (err)
+		return err;
+
+	err = __pkvm_create_mappings(addr, size, phys, prot);
+	if (err)
+		return err;
+
+	*haddr = addr + offset_in_page(phys);
+	return err;
+}
+
+int pkvm_create_mappings_locked(void *from, void *to, enum kvm_pgtable_prot prot)
+{
+	unsigned long start = (unsigned long)from;
+	unsigned long end = (unsigned long)to;
+	unsigned long virt_addr;
+	phys_addr_t phys;
+
+	hyp_assert_lock_held(&pkvm_pgd_lock);
+
+	start = start & PAGE_MASK;
+	end = PAGE_ALIGN(end);
+
+	for (virt_addr = start; virt_addr < end; virt_addr += PAGE_SIZE) {
+		int err;
+
+		phys = hyp_virt_to_phys((void *)virt_addr);
+		err = kvm_pgtable_hyp_map(&pkvm_pgtable, virt_addr, PAGE_SIZE,
+					  phys, prot);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
+{
+	int ret;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+	ret = pkvm_create_mappings_locked(from, to, prot);
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	return ret;
+}
+
+int hyp_back_vmemmap(phys_addr_t back)
+{
+	unsigned long i, start, size, end = 0;
+	int ret;
+
+	for (i = 0; i < hyp_memblock_nr; i++) {
+		start = hyp_memory[i].base;
+		start = ALIGN_DOWN((u64)hyp_phys_to_page(start), PAGE_SIZE);
+		/*
+		 * The begining of the hyp_vmemmap region for the current
+		 * memblock may already be backed by the page backing the end
+		 * the previous region, so avoid mapping it twice.
+		 */
+		start = max(start, end);
+
+		end = hyp_memory[i].base + hyp_memory[i].size;
+		end = PAGE_ALIGN((u64)hyp_phys_to_page(end));
+		if (start >= end)
+			continue;
+
+		size = end - start;
+		ret = __pkvm_create_mappings(start, size, back, PAGE_HYP);
+		if (ret)
+			return ret;
+
+		memset(hyp_phys_to_virt(back), 0, size);
+		back += size;
+	}
+
+	return 0;
+}
+
+static void *__hyp_bp_vect_base;
+int pkvm_cpu_set_vector(enum arm64_hyp_spectre_vector slot)
+{
+	void *vector;
+
+	switch (slot) {
+	case HYP_VECTOR_DIRECT: {
+		vector = __kvm_hyp_vector;
+		break;
+	}
+	case HYP_VECTOR_SPECTRE_DIRECT: {
+		vector = __bp_harden_hyp_vecs;
+		break;
+	}
+	case HYP_VECTOR_INDIRECT:
+	case HYP_VECTOR_SPECTRE_INDIRECT: {
+		vector = (void *)__hyp_bp_vect_base;
+		break;
+	}
+	default:
+		return -EINVAL;
+	}
+
+	vector = __kvm_vector_slot2addr(vector, slot);
+	*this_cpu_ptr(&kvm_hyp_vector) = (unsigned long)vector;
+
+	return 0;
+}
+
+int hyp_map_vectors(void)
+{
+	phys_addr_t phys;
+	unsigned long bp_base;
+	int ret;
+
+	if (!kvm_system_needs_idmapped_vectors()) {
+		__hyp_bp_vect_base = __bp_harden_hyp_vecs;
+		return 0;
+	}
+
+	phys = __hyp_pa(__bp_harden_hyp_vecs);
+	ret = __pkvm_create_private_mapping(phys, __BP_HARDEN_HYP_VECS_SZ,
+					    PAGE_HYP_EXEC, &bp_base);
+	if (ret)
+		return ret;
+
+	__hyp_bp_vect_base = (void *)bp_base;
+
+	return 0;
+}
+
+void *hyp_fixmap_map(phys_addr_t phys)
+{
+	struct hyp_fixmap_slot *slot = this_cpu_ptr(&fixmap_slots);
+	kvm_pte_t pte, *ptep = slot->ptep;
+
+	pte = *ptep;
+	pte &= ~kvm_phys_to_pte(KVM_PHYS_INVALID);
+	pte |= kvm_phys_to_pte(phys) | KVM_PTE_VALID;
+	WRITE_ONCE(*ptep, pte);
+	dsb(ishst);
+
+	return (void *)slot->addr;
+}
+
+static void fixmap_clear_slot(struct hyp_fixmap_slot *slot)
+{
+	kvm_pte_t *ptep = slot->ptep;
+	u64 addr = slot->addr;
+
+	WRITE_ONCE(*ptep, *ptep & ~KVM_PTE_VALID);
+
+	/*
+	 * Irritatingly, the architecture requires that we use inner-shareable
+	 * broadcast TLB invalidation here in case another CPU speculates
+	 * through our fixmap and decides to create an "amalagamation of the
+	 * values held in the TLB" due to the apparent lack of a
+	 * break-before-make sequence.
+	 *
+	 * https://lore.kernel.org/kvm/20221017115209.2099-1-will@kernel.org/T/#mf10dfbaf1eaef9274c581b81c53758918c1d0f03
+	 */
+	dsb(ishst);
+	__tlbi_level(vale2is, __TLBI_VADDR(addr, 0), (KVM_PGTABLE_MAX_LEVELS - 1));
+	dsb(ish);
+	isb();
+}
+
+void hyp_fixmap_unmap(void)
+{
+	fixmap_clear_slot(this_cpu_ptr(&fixmap_slots));
+}
+
+static int __create_fixmap_slot_cb(const struct kvm_pgtable_visit_ctx *ctx,
+				   enum kvm_pgtable_walk_flags visit)
+{
+	struct hyp_fixmap_slot *slot = per_cpu_ptr(&fixmap_slots, (u64)ctx->arg);
+
+	if (!kvm_pte_valid(ctx->old) || ctx->level != KVM_PGTABLE_MAX_LEVELS - 1)
+		return -EINVAL;
+
+	slot->addr = ctx->addr;
+	slot->ptep = ctx->ptep;
+
+	/*
+	 * Clear the PTE, but keep the page-table page refcount elevated to
+	 * prevent it from ever being freed. This lets us manipulate the PTEs
+	 * by hand safely without ever needing to allocate memory.
+	 */
+	fixmap_clear_slot(slot);
+
+	return 0;
+}
+
+static int create_fixmap_slot(u64 addr, u64 cpu)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= __create_fixmap_slot_cb,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg = (void *)cpu,
+	};
+
+	return kvm_pgtable_walk(&pkvm_pgtable, addr, PAGE_SIZE, &walker);
+}
+
+int hyp_create_pcpu_fixmap(void)
+{
+	unsigned long addr, i;
+	int ret;
+
+	for (i = 0; i < hyp_nr_cpus; i++) {
+		ret = pkvm_alloc_private_va_range(PAGE_SIZE, &addr);
+		if (ret)
+			return ret;
+
+		ret = kvm_pgtable_hyp_map(&pkvm_pgtable, addr, PAGE_SIZE,
+					  __hyp_pa(__hyp_bss_start), PAGE_HYP);
+		if (ret)
+			return ret;
+
+		ret = create_fixmap_slot(addr, i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int hyp_create_idmap(u32 hyp_va_bits)
+{
+	unsigned long start, end;
+
+	start = hyp_virt_to_phys((void *)__hyp_idmap_text_start);
+	start = ALIGN_DOWN(start, PAGE_SIZE);
+
+	end = hyp_virt_to_phys((void *)__hyp_idmap_text_end);
+	end = ALIGN(end, PAGE_SIZE);
+
+	/*
+	 * One half of the VA space is reserved to linearly map portions of
+	 * memory -- see va_layout.c for more details. The other half of the VA
+	 * space contains the trampoline page, and needs some care. Split that
+	 * second half in two and find the quarter of VA space not conflicting
+	 * with the idmap to place the IOs and the vmemmap. IOs use the lower
+	 * half of the quarter and the vmemmap the upper half.
+	 */
+	__io_map_base = start & BIT(hyp_va_bits - 2);
+	__io_map_base ^= BIT(hyp_va_bits - 2);
+	__hyp_vmemmap = __io_map_base | BIT(hyp_va_bits - 3);
+
+	return __pkvm_create_mappings(start, end - start, start, PAGE_HYP_EXEC);
+}
+
+int pkvm_create_stack(phys_addr_t phys, unsigned long *haddr)
+{
+	unsigned long addr, prev_base;
+	size_t size;
+	int ret;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+
+	prev_base = __io_map_base;
+	/*
+	 * Efficient stack verification using the PAGE_SHIFT bit implies
+	 * an alignment of our allocation on the order of the size.
+	 */
+	size = PAGE_SIZE * 2;
+	addr = ALIGN(__io_map_base, size);
+
+	ret = __pkvm_alloc_private_va_range(addr, size);
+	if (!ret) {
+		/*
+		 * Since the stack grows downwards, map the stack to the page
+		 * at the higher address and leave the lower guard page
+		 * unbacked.
+		 *
+		 * Any valid stack address now has the PAGE_SHIFT bit as 1
+		 * and addresses corresponding to the guard page have the
+		 * PAGE_SHIFT bit as 0 - this is used for overflow detection.
+		 */
+		ret = kvm_pgtable_hyp_map(&pkvm_pgtable, addr + PAGE_SIZE,
+					  PAGE_SIZE, phys, PAGE_HYP);
+		if (ret)
+			__io_map_base = prev_base;
+	}
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	*haddr = addr + size;
+
+	return ret;
+}
+
+static void *admit_host_page(void *arg)
+{
+	struct kvm_hyp_memcache *host_mc = arg;
+
+	if (!host_mc->nr_pages)
+		return NULL;
+
+	/*
+	 * The host still owns the pages in its memcache, so we need to go
+	 * through a full host-to-hyp donation cycle to change it. Fortunately,
+	 * __pkvm_host_donate_hyp() takes care of races for us, so if it
+	 * succeeds we're good to go.
+	 */
+	if (__pkvm_host_donate_hyp(hyp_phys_to_pfn(host_mc->head), 1))
+		return NULL;
+
+	return pop_hyp_memcache(host_mc, hyp_phys_to_virt);
+}
+
+/* Refill our local memcache by poping pages from the one provided by the host. */
+int refill_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages,
+		    struct kvm_hyp_memcache *host_mc)
+{
+	struct kvm_hyp_memcache tmp = *host_mc;
+	int ret;
+
+	ret =  __topup_hyp_memcache(mc, min_pages, admit_host_page,
+				    hyp_virt_to_phys, &tmp);
+	*host_mc = tmp;
+
+	return ret;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
new file mode 100644
index 000000000..b1e392186
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#include <asm/kvm_hyp.h>
+#include <nvhe/gfp.h>
+
+u64 __hyp_vmemmap;
+
+/*
+ * Index the hyp_vmemmap to find a potential buddy page, but make no assumption
+ * about its current state.
+ *
+ * Example buddy-tree for a 4-pages physically contiguous pool:
+ *
+ *                 o : Page 3
+ *                /
+ *               o-o : Page 2
+ *              /
+ *             /   o : Page 1
+ *            /   /
+ *           o---o-o : Page 0
+ *    Order  2   1 0
+ *
+ * Example of requests on this pool:
+ *   __find_buddy_nocheck(pool, page 0, order 0) => page 1
+ *   __find_buddy_nocheck(pool, page 0, order 1) => page 2
+ *   __find_buddy_nocheck(pool, page 1, order 0) => page 0
+ *   __find_buddy_nocheck(pool, page 2, order 0) => page 3
+ */
+static struct hyp_page *__find_buddy_nocheck(struct hyp_pool *pool,
+					     struct hyp_page *p,
+					     unsigned short order)
+{
+	phys_addr_t addr = hyp_page_to_phys(p);
+
+	addr ^= (PAGE_SIZE << order);
+
+	/*
+	 * Don't return a page outside the pool range -- it belongs to
+	 * something else and may not be mapped in hyp_vmemmap.
+	 */
+	if (addr < pool->range_start || addr >= pool->range_end)
+		return NULL;
+
+	return hyp_phys_to_page(addr);
+}
+
+/* Find a buddy page currently available for allocation */
+static struct hyp_page *__find_buddy_avail(struct hyp_pool *pool,
+					   struct hyp_page *p,
+					   unsigned short order)
+{
+	struct hyp_page *buddy = __find_buddy_nocheck(pool, p, order);
+
+	if (!buddy || buddy->order != order || buddy->refcount)
+		return NULL;
+
+	return buddy;
+
+}
+
+/*
+ * Pages that are available for allocation are tracked in free-lists, so we use
+ * the pages themselves to store the list nodes to avoid wasting space. As the
+ * allocator always returns zeroed pages (which are zeroed on the hyp_put_page()
+ * path to optimize allocation speed), we also need to clean-up the list node in
+ * each page when we take it out of the list.
+ */
+static inline void page_remove_from_list(struct hyp_page *p)
+{
+	struct list_head *node = hyp_page_to_virt(p);
+
+	__list_del_entry(node);
+	memset(node, 0, sizeof(*node));
+}
+
+static inline void page_add_to_list(struct hyp_page *p, struct list_head *head)
+{
+	struct list_head *node = hyp_page_to_virt(p);
+
+	INIT_LIST_HEAD(node);
+	list_add_tail(node, head);
+}
+
+static inline struct hyp_page *node_to_page(struct list_head *node)
+{
+	return hyp_virt_to_page(node);
+}
+
+static void __hyp_attach_page(struct hyp_pool *pool,
+			      struct hyp_page *p)
+{
+	phys_addr_t phys = hyp_page_to_phys(p);
+	unsigned short order = p->order;
+	struct hyp_page *buddy;
+
+	memset(hyp_page_to_virt(p), 0, PAGE_SIZE << p->order);
+
+	/* Skip coalescing for 'external' pages being freed into the pool. */
+	if (phys < pool->range_start || phys >= pool->range_end)
+		goto insert;
+
+	/*
+	 * Only the first struct hyp_page of a high-order page (otherwise known
+	 * as the 'head') should have p->order set. The non-head pages should
+	 * have p->order = HYP_NO_ORDER. Here @p may no longer be the head
+	 * after coalescing, so make sure to mark it HYP_NO_ORDER proactively.
+	 */
+	p->order = HYP_NO_ORDER;
+	for (; (order + 1) <= pool->max_order; order++) {
+		buddy = __find_buddy_avail(pool, p, order);
+		if (!buddy)
+			break;
+
+		/* Take the buddy out of its list, and coalesce with @p */
+		page_remove_from_list(buddy);
+		buddy->order = HYP_NO_ORDER;
+		p = min(p, buddy);
+	}
+
+insert:
+	/* Mark the new head, and insert it */
+	p->order = order;
+	page_add_to_list(p, &pool->free_area[order]);
+}
+
+static struct hyp_page *__hyp_extract_page(struct hyp_pool *pool,
+					   struct hyp_page *p,
+					   unsigned short order)
+{
+	struct hyp_page *buddy;
+
+	page_remove_from_list(p);
+	while (p->order > order) {
+		/*
+		 * The buddy of order n - 1 currently has HYP_NO_ORDER as it
+		 * is covered by a higher-level page (whose head is @p). Use
+		 * __find_buddy_nocheck() to find it and inject it in the
+		 * free_list[n - 1], effectively splitting @p in half.
+		 */
+		p->order--;
+		buddy = __find_buddy_nocheck(pool, p, p->order);
+		buddy->order = p->order;
+		page_add_to_list(buddy, &pool->free_area[buddy->order]);
+	}
+
+	return p;
+}
+
+static void __hyp_put_page(struct hyp_pool *pool, struct hyp_page *p)
+{
+	if (hyp_page_ref_dec_and_test(p))
+		__hyp_attach_page(pool, p);
+}
+
+/*
+ * Changes to the buddy tree and page refcounts must be done with the hyp_pool
+ * lock held. If a refcount change requires an update to the buddy tree (e.g.
+ * hyp_put_page()), both operations must be done within the same critical
+ * section to guarantee transient states (e.g. a page with null refcount but
+ * not yet attached to a free list) can't be observed by well-behaved readers.
+ */
+void hyp_put_page(struct hyp_pool *pool, void *addr)
+{
+	struct hyp_page *p = hyp_virt_to_page(addr);
+
+	hyp_spin_lock(&pool->lock);
+	__hyp_put_page(pool, p);
+	hyp_spin_unlock(&pool->lock);
+}
+
+void hyp_get_page(struct hyp_pool *pool, void *addr)
+{
+	struct hyp_page *p = hyp_virt_to_page(addr);
+
+	hyp_spin_lock(&pool->lock);
+	hyp_page_ref_inc(p);
+	hyp_spin_unlock(&pool->lock);
+}
+
+void hyp_split_page(struct hyp_page *p)
+{
+	unsigned short order = p->order;
+	unsigned int i;
+
+	p->order = 0;
+	for (i = 1; i < (1 << order); i++) {
+		struct hyp_page *tail = p + i;
+
+		tail->order = 0;
+		hyp_set_page_refcounted(tail);
+	}
+}
+
+void *hyp_alloc_pages(struct hyp_pool *pool, unsigned short order)
+{
+	unsigned short i = order;
+	struct hyp_page *p;
+
+	hyp_spin_lock(&pool->lock);
+
+	/* Look for a high-enough-order page */
+	while (i <= pool->max_order && list_empty(&pool->free_area[i]))
+		i++;
+	if (i > pool->max_order) {
+		hyp_spin_unlock(&pool->lock);
+		return NULL;
+	}
+
+	/* Extract it from the tree at the right order */
+	p = node_to_page(pool->free_area[i].next);
+	p = __hyp_extract_page(pool, p, order);
+
+	hyp_set_page_refcounted(p);
+	hyp_spin_unlock(&pool->lock);
+
+	return hyp_page_to_virt(p);
+}
+
+int hyp_pool_init(struct hyp_pool *pool, u64 pfn, unsigned int nr_pages,
+		  unsigned int reserved_pages)
+{
+	phys_addr_t phys = hyp_pfn_to_phys(pfn);
+	struct hyp_page *p;
+	int i;
+
+	hyp_spin_lock_init(&pool->lock);
+	pool->max_order = min(MAX_ORDER, get_order(nr_pages << PAGE_SHIFT));
+	for (i = 0; i <= pool->max_order; i++)
+		INIT_LIST_HEAD(&pool->free_area[i]);
+	pool->range_start = phys;
+	pool->range_end = phys + (nr_pages << PAGE_SHIFT);
+
+	/* Init the vmemmap portion */
+	p = hyp_phys_to_page(phys);
+	for (i = 0; i < nr_pages; i++)
+		hyp_set_page_refcounted(&p[i]);
+
+	/* Attach the unused pages to the buddy tree */
+	for (i = reserved_pages; i < nr_pages; i++)
+		__hyp_put_page(pool, &p[i]);
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/pkvm.c b/arch/arm64/kvm/hyp/nvhe/pkvm.c
new file mode 100644
index 000000000..8033ef353
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/pkvm.c
@@ -0,0 +1,636 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Google LLC
+ * Author: Fuad Tabba <tabba@google.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/mm.h>
+#include <nvhe/fixed_config.h>
+#include <nvhe/mem_protect.h>
+#include <nvhe/memory.h>
+#include <nvhe/pkvm.h>
+#include <nvhe/trap_handler.h>
+
+/* Used by icache_is_vpipt(). */
+unsigned long __icache_flags;
+
+/* Used by kvm_get_vttbr(). */
+unsigned int kvm_arm_vmid_bits;
+
+/*
+ * Set trap register values based on features in ID_AA64PFR0.
+ */
+static void pvm_init_traps_aa64pfr0(struct kvm_vcpu *vcpu)
+{
+	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64PFR0_EL1);
+	u64 hcr_set = HCR_RW;
+	u64 hcr_clear = 0;
+	u64 cptr_set = 0;
+	u64 cptr_clear = 0;
+
+	/* Protected KVM does not support AArch32 guests. */
+	BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL0),
+		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_EL1_ELx_64BIT_ONLY);
+	BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1),
+		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) != ID_AA64PFR0_EL1_ELx_64BIT_ONLY);
+
+	/*
+	 * Linux guests assume support for floating-point and Advanced SIMD. Do
+	 * not change the trapping behavior for these from the KVM default.
+	 */
+	BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_FP),
+				PVM_ID_AA64PFR0_ALLOW));
+	BUILD_BUG_ON(!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AdvSIMD),
+				PVM_ID_AA64PFR0_ALLOW));
+
+	if (has_hvhe())
+		hcr_set |= HCR_E2H;
+
+	/* Trap RAS unless all current versions are supported */
+	if (FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_RAS), feature_ids) <
+	    ID_AA64PFR0_EL1_RAS_V1P1) {
+		hcr_set |= HCR_TERR | HCR_TEA;
+		hcr_clear |= HCR_FIEN;
+	}
+
+	/* Trap AMU */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AMU), feature_ids)) {
+		hcr_clear |= HCR_AMVOFFEN;
+		cptr_set |= CPTR_EL2_TAM;
+	}
+
+	/* Trap SVE */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE), feature_ids)) {
+		if (has_hvhe())
+			cptr_clear |= CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN;
+		else
+			cptr_set |= CPTR_EL2_TZ;
+	}
+
+	vcpu->arch.hcr_el2 |= hcr_set;
+	vcpu->arch.hcr_el2 &= ~hcr_clear;
+	vcpu->arch.cptr_el2 |= cptr_set;
+	vcpu->arch.cptr_el2 &= ~cptr_clear;
+}
+
+/*
+ * Set trap register values based on features in ID_AA64PFR1.
+ */
+static void pvm_init_traps_aa64pfr1(struct kvm_vcpu *vcpu)
+{
+	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64PFR1_EL1);
+	u64 hcr_set = 0;
+	u64 hcr_clear = 0;
+
+	/* Memory Tagging: Trap and Treat as Untagged if not supported. */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE), feature_ids)) {
+		hcr_set |= HCR_TID5;
+		hcr_clear |= HCR_DCT | HCR_ATA;
+	}
+
+	vcpu->arch.hcr_el2 |= hcr_set;
+	vcpu->arch.hcr_el2 &= ~hcr_clear;
+}
+
+/*
+ * Set trap register values based on features in ID_AA64DFR0.
+ */
+static void pvm_init_traps_aa64dfr0(struct kvm_vcpu *vcpu)
+{
+	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64DFR0_EL1);
+	u64 mdcr_set = 0;
+	u64 mdcr_clear = 0;
+	u64 cptr_set = 0;
+
+	/* Trap/constrain PMU */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), feature_ids)) {
+		mdcr_set |= MDCR_EL2_TPM | MDCR_EL2_TPMCR;
+		mdcr_clear |= MDCR_EL2_HPME | MDCR_EL2_MTPME |
+			      MDCR_EL2_HPMN_MASK;
+	}
+
+	/* Trap Debug */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DebugVer), feature_ids))
+		mdcr_set |= MDCR_EL2_TDRA | MDCR_EL2_TDA | MDCR_EL2_TDE;
+
+	/* Trap OS Double Lock */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_DoubleLock), feature_ids))
+		mdcr_set |= MDCR_EL2_TDOSA;
+
+	/* Trap SPE */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMSVer), feature_ids)) {
+		mdcr_set |= MDCR_EL2_TPMS;
+		mdcr_clear |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT;
+	}
+
+	/* Trap Trace Filter */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_TraceFilt), feature_ids))
+		mdcr_set |= MDCR_EL2_TTRF;
+
+	/* Trap Trace */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_TraceVer), feature_ids)) {
+		if (has_hvhe())
+			cptr_set |= CPACR_EL1_TTA;
+		else
+			cptr_set |= CPTR_EL2_TTA;
+	}
+
+	vcpu->arch.mdcr_el2 |= mdcr_set;
+	vcpu->arch.mdcr_el2 &= ~mdcr_clear;
+	vcpu->arch.cptr_el2 |= cptr_set;
+}
+
+/*
+ * Set trap register values based on features in ID_AA64MMFR0.
+ */
+static void pvm_init_traps_aa64mmfr0(struct kvm_vcpu *vcpu)
+{
+	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64MMFR0_EL1);
+	u64 mdcr_set = 0;
+
+	/* Trap Debug Communications Channel registers */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR0_EL1_FGT), feature_ids))
+		mdcr_set |= MDCR_EL2_TDCC;
+
+	vcpu->arch.mdcr_el2 |= mdcr_set;
+}
+
+/*
+ * Set trap register values based on features in ID_AA64MMFR1.
+ */
+static void pvm_init_traps_aa64mmfr1(struct kvm_vcpu *vcpu)
+{
+	const u64 feature_ids = pvm_read_id_reg(vcpu, SYS_ID_AA64MMFR1_EL1);
+	u64 hcr_set = 0;
+
+	/* Trap LOR */
+	if (!FIELD_GET(ARM64_FEATURE_MASK(ID_AA64MMFR1_EL1_LO), feature_ids))
+		hcr_set |= HCR_TLOR;
+
+	vcpu->arch.hcr_el2 |= hcr_set;
+}
+
+/*
+ * Set baseline trap register values.
+ */
+static void pvm_init_trap_regs(struct kvm_vcpu *vcpu)
+{
+	const u64 hcr_trap_feat_regs = HCR_TID3;
+	const u64 hcr_trap_impdef = HCR_TACR | HCR_TIDCP | HCR_TID1;
+
+	/*
+	 * Always trap:
+	 * - Feature id registers: to control features exposed to guests
+	 * - Implementation-defined features
+	 */
+	vcpu->arch.hcr_el2 |= hcr_trap_feat_regs | hcr_trap_impdef;
+
+	/* Clear res0 and set res1 bits to trap potential new features. */
+	vcpu->arch.hcr_el2 &= ~(HCR_RES0);
+	vcpu->arch.mdcr_el2 &= ~(MDCR_EL2_RES0);
+	if (!has_hvhe()) {
+		vcpu->arch.cptr_el2 |= CPTR_NVHE_EL2_RES1;
+		vcpu->arch.cptr_el2 &= ~(CPTR_NVHE_EL2_RES0);
+	}
+}
+
+/*
+ * Initialize trap register values for protected VMs.
+ */
+void __pkvm_vcpu_init_traps(struct kvm_vcpu *vcpu)
+{
+	pvm_init_trap_regs(vcpu);
+	pvm_init_traps_aa64pfr0(vcpu);
+	pvm_init_traps_aa64pfr1(vcpu);
+	pvm_init_traps_aa64dfr0(vcpu);
+	pvm_init_traps_aa64mmfr0(vcpu);
+	pvm_init_traps_aa64mmfr1(vcpu);
+}
+
+/*
+ * Start the VM table handle at the offset defined instead of at 0.
+ * Mainly for sanity checking and debugging.
+ */
+#define HANDLE_OFFSET 0x1000
+
+static unsigned int vm_handle_to_idx(pkvm_handle_t handle)
+{
+	return handle - HANDLE_OFFSET;
+}
+
+static pkvm_handle_t idx_to_vm_handle(unsigned int idx)
+{
+	return idx + HANDLE_OFFSET;
+}
+
+/*
+ * Spinlock for protecting state related to the VM table. Protects writes
+ * to 'vm_table' and 'nr_table_entries' as well as reads and writes to
+ * 'last_hyp_vcpu_lookup'.
+ */
+static DEFINE_HYP_SPINLOCK(vm_table_lock);
+
+/*
+ * The table of VM entries for protected VMs in hyp.
+ * Allocated at hyp initialization and setup.
+ */
+static struct pkvm_hyp_vm **vm_table;
+
+void pkvm_hyp_vm_table_init(void *tbl)
+{
+	WARN_ON(vm_table);
+	vm_table = tbl;
+}
+
+/*
+ * Return the hyp vm structure corresponding to the handle.
+ */
+static struct pkvm_hyp_vm *get_vm_by_handle(pkvm_handle_t handle)
+{
+	unsigned int idx = vm_handle_to_idx(handle);
+
+	if (unlikely(idx >= KVM_MAX_PVMS))
+		return NULL;
+
+	return vm_table[idx];
+}
+
+struct pkvm_hyp_vcpu *pkvm_load_hyp_vcpu(pkvm_handle_t handle,
+					 unsigned int vcpu_idx)
+{
+	struct pkvm_hyp_vcpu *hyp_vcpu = NULL;
+	struct pkvm_hyp_vm *hyp_vm;
+
+	hyp_spin_lock(&vm_table_lock);
+	hyp_vm = get_vm_by_handle(handle);
+	if (!hyp_vm || hyp_vm->nr_vcpus <= vcpu_idx)
+		goto unlock;
+
+	hyp_vcpu = hyp_vm->vcpus[vcpu_idx];
+	hyp_page_ref_inc(hyp_virt_to_page(hyp_vm));
+unlock:
+	hyp_spin_unlock(&vm_table_lock);
+	return hyp_vcpu;
+}
+
+void pkvm_put_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu)
+{
+	struct pkvm_hyp_vm *hyp_vm = pkvm_hyp_vcpu_to_hyp_vm(hyp_vcpu);
+
+	hyp_spin_lock(&vm_table_lock);
+	hyp_page_ref_dec(hyp_virt_to_page(hyp_vm));
+	hyp_spin_unlock(&vm_table_lock);
+}
+
+static void unpin_host_vcpu(struct kvm_vcpu *host_vcpu)
+{
+	if (host_vcpu)
+		hyp_unpin_shared_mem(host_vcpu, host_vcpu + 1);
+}
+
+static void unpin_host_vcpus(struct pkvm_hyp_vcpu *hyp_vcpus[],
+			     unsigned int nr_vcpus)
+{
+	int i;
+
+	for (i = 0; i < nr_vcpus; i++)
+		unpin_host_vcpu(hyp_vcpus[i]->host_vcpu);
+}
+
+static void init_pkvm_hyp_vm(struct kvm *host_kvm, struct pkvm_hyp_vm *hyp_vm,
+			     unsigned int nr_vcpus)
+{
+	hyp_vm->host_kvm = host_kvm;
+	hyp_vm->kvm.created_vcpus = nr_vcpus;
+	hyp_vm->kvm.arch.vtcr = host_mmu.arch.vtcr;
+}
+
+static int init_pkvm_hyp_vcpu(struct pkvm_hyp_vcpu *hyp_vcpu,
+			      struct pkvm_hyp_vm *hyp_vm,
+			      struct kvm_vcpu *host_vcpu,
+			      unsigned int vcpu_idx)
+{
+	int ret = 0;
+
+	if (hyp_pin_shared_mem(host_vcpu, host_vcpu + 1))
+		return -EBUSY;
+
+	if (host_vcpu->vcpu_idx != vcpu_idx) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	hyp_vcpu->host_vcpu = host_vcpu;
+
+	hyp_vcpu->vcpu.kvm = &hyp_vm->kvm;
+	hyp_vcpu->vcpu.vcpu_id = READ_ONCE(host_vcpu->vcpu_id);
+	hyp_vcpu->vcpu.vcpu_idx = vcpu_idx;
+
+	hyp_vcpu->vcpu.arch.hw_mmu = &hyp_vm->kvm.arch.mmu;
+	hyp_vcpu->vcpu.arch.cflags = READ_ONCE(host_vcpu->arch.cflags);
+done:
+	if (ret)
+		unpin_host_vcpu(host_vcpu);
+	return ret;
+}
+
+static int find_free_vm_table_entry(struct kvm *host_kvm)
+{
+	int i;
+
+	for (i = 0; i < KVM_MAX_PVMS; ++i) {
+		if (!vm_table[i])
+			return i;
+	}
+
+	return -ENOMEM;
+}
+
+/*
+ * Allocate a VM table entry and insert a pointer to the new vm.
+ *
+ * Return a unique handle to the protected VM on success,
+ * negative error code on failure.
+ */
+static pkvm_handle_t insert_vm_table_entry(struct kvm *host_kvm,
+					   struct pkvm_hyp_vm *hyp_vm)
+{
+	struct kvm_s2_mmu *mmu = &hyp_vm->kvm.arch.mmu;
+	int idx;
+
+	hyp_assert_lock_held(&vm_table_lock);
+
+	/*
+	 * Initializing protected state might have failed, yet a malicious
+	 * host could trigger this function. Thus, ensure that 'vm_table'
+	 * exists.
+	 */
+	if (unlikely(!vm_table))
+		return -EINVAL;
+
+	idx = find_free_vm_table_entry(host_kvm);
+	if (idx < 0)
+		return idx;
+
+	hyp_vm->kvm.arch.pkvm.handle = idx_to_vm_handle(idx);
+
+	/* VMID 0 is reserved for the host */
+	atomic64_set(&mmu->vmid.id, idx + 1);
+
+	mmu->arch = &hyp_vm->kvm.arch;
+	mmu->pgt = &hyp_vm->pgt;
+
+	vm_table[idx] = hyp_vm;
+	return hyp_vm->kvm.arch.pkvm.handle;
+}
+
+/*
+ * Deallocate and remove the VM table entry corresponding to the handle.
+ */
+static void remove_vm_table_entry(pkvm_handle_t handle)
+{
+	hyp_assert_lock_held(&vm_table_lock);
+	vm_table[vm_handle_to_idx(handle)] = NULL;
+}
+
+static size_t pkvm_get_hyp_vm_size(unsigned int nr_vcpus)
+{
+	return size_add(sizeof(struct pkvm_hyp_vm),
+		size_mul(sizeof(struct pkvm_hyp_vcpu *), nr_vcpus));
+}
+
+static void *map_donated_memory_noclear(unsigned long host_va, size_t size)
+{
+	void *va = (void *)kern_hyp_va(host_va);
+
+	if (!PAGE_ALIGNED(va))
+		return NULL;
+
+	if (__pkvm_host_donate_hyp(hyp_virt_to_pfn(va),
+				   PAGE_ALIGN(size) >> PAGE_SHIFT))
+		return NULL;
+
+	return va;
+}
+
+static void *map_donated_memory(unsigned long host_va, size_t size)
+{
+	void *va = map_donated_memory_noclear(host_va, size);
+
+	if (va)
+		memset(va, 0, size);
+
+	return va;
+}
+
+static void __unmap_donated_memory(void *va, size_t size)
+{
+	WARN_ON(__pkvm_hyp_donate_host(hyp_virt_to_pfn(va),
+				       PAGE_ALIGN(size) >> PAGE_SHIFT));
+}
+
+static void unmap_donated_memory(void *va, size_t size)
+{
+	if (!va)
+		return;
+
+	memset(va, 0, size);
+	__unmap_donated_memory(va, size);
+}
+
+static void unmap_donated_memory_noclear(void *va, size_t size)
+{
+	if (!va)
+		return;
+
+	__unmap_donated_memory(va, size);
+}
+
+/*
+ * Initialize the hypervisor copy of the protected VM state using the
+ * memory donated by the host.
+ *
+ * Unmaps the donated memory from the host at stage 2.
+ *
+ * host_kvm: A pointer to the host's struct kvm.
+ * vm_hva: The host va of the area being donated for the VM state.
+ *	   Must be page aligned.
+ * pgd_hva: The host va of the area being donated for the stage-2 PGD for
+ *	    the VM. Must be page aligned. Its size is implied by the VM's
+ *	    VTCR.
+ *
+ * Return a unique handle to the protected VM on success,
+ * negative error code on failure.
+ */
+int __pkvm_init_vm(struct kvm *host_kvm, unsigned long vm_hva,
+		   unsigned long pgd_hva)
+{
+	struct pkvm_hyp_vm *hyp_vm = NULL;
+	size_t vm_size, pgd_size;
+	unsigned int nr_vcpus;
+	void *pgd = NULL;
+	int ret;
+
+	ret = hyp_pin_shared_mem(host_kvm, host_kvm + 1);
+	if (ret)
+		return ret;
+
+	nr_vcpus = READ_ONCE(host_kvm->created_vcpus);
+	if (nr_vcpus < 1) {
+		ret = -EINVAL;
+		goto err_unpin_kvm;
+	}
+
+	vm_size = pkvm_get_hyp_vm_size(nr_vcpus);
+	pgd_size = kvm_pgtable_stage2_pgd_size(host_mmu.arch.vtcr);
+
+	ret = -ENOMEM;
+
+	hyp_vm = map_donated_memory(vm_hva, vm_size);
+	if (!hyp_vm)
+		goto err_remove_mappings;
+
+	pgd = map_donated_memory_noclear(pgd_hva, pgd_size);
+	if (!pgd)
+		goto err_remove_mappings;
+
+	init_pkvm_hyp_vm(host_kvm, hyp_vm, nr_vcpus);
+
+	hyp_spin_lock(&vm_table_lock);
+	ret = insert_vm_table_entry(host_kvm, hyp_vm);
+	if (ret < 0)
+		goto err_unlock;
+
+	ret = kvm_guest_prepare_stage2(hyp_vm, pgd);
+	if (ret)
+		goto err_remove_vm_table_entry;
+	hyp_spin_unlock(&vm_table_lock);
+
+	return hyp_vm->kvm.arch.pkvm.handle;
+
+err_remove_vm_table_entry:
+	remove_vm_table_entry(hyp_vm->kvm.arch.pkvm.handle);
+err_unlock:
+	hyp_spin_unlock(&vm_table_lock);
+err_remove_mappings:
+	unmap_donated_memory(hyp_vm, vm_size);
+	unmap_donated_memory(pgd, pgd_size);
+err_unpin_kvm:
+	hyp_unpin_shared_mem(host_kvm, host_kvm + 1);
+	return ret;
+}
+
+/*
+ * Initialize the hypervisor copy of the protected vCPU state using the
+ * memory donated by the host.
+ *
+ * handle: The handle for the protected vm.
+ * host_vcpu: A pointer to the corresponding host vcpu.
+ * vcpu_hva: The host va of the area being donated for the vcpu state.
+ *	     Must be page aligned. The size of the area must be equal to
+ *	     the page-aligned size of 'struct pkvm_hyp_vcpu'.
+ * Return 0 on success, negative error code on failure.
+ */
+int __pkvm_init_vcpu(pkvm_handle_t handle, struct kvm_vcpu *host_vcpu,
+		     unsigned long vcpu_hva)
+{
+	struct pkvm_hyp_vcpu *hyp_vcpu;
+	struct pkvm_hyp_vm *hyp_vm;
+	unsigned int idx;
+	int ret;
+
+	hyp_vcpu = map_donated_memory(vcpu_hva, sizeof(*hyp_vcpu));
+	if (!hyp_vcpu)
+		return -ENOMEM;
+
+	hyp_spin_lock(&vm_table_lock);
+
+	hyp_vm = get_vm_by_handle(handle);
+	if (!hyp_vm) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	idx = hyp_vm->nr_vcpus;
+	if (idx >= hyp_vm->kvm.created_vcpus) {
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	ret = init_pkvm_hyp_vcpu(hyp_vcpu, hyp_vm, host_vcpu, idx);
+	if (ret)
+		goto unlock;
+
+	hyp_vm->vcpus[idx] = hyp_vcpu;
+	hyp_vm->nr_vcpus++;
+unlock:
+	hyp_spin_unlock(&vm_table_lock);
+
+	if (ret)
+		unmap_donated_memory(hyp_vcpu, sizeof(*hyp_vcpu));
+
+	return ret;
+}
+
+static void
+teardown_donated_memory(struct kvm_hyp_memcache *mc, void *addr, size_t size)
+{
+	size = PAGE_ALIGN(size);
+	memset(addr, 0, size);
+
+	for (void *start = addr; start < addr + size; start += PAGE_SIZE)
+		push_hyp_memcache(mc, start, hyp_virt_to_phys);
+
+	unmap_donated_memory_noclear(addr, size);
+}
+
+int __pkvm_teardown_vm(pkvm_handle_t handle)
+{
+	struct kvm_hyp_memcache *mc;
+	struct pkvm_hyp_vm *hyp_vm;
+	struct kvm *host_kvm;
+	unsigned int idx;
+	size_t vm_size;
+	int err;
+
+	hyp_spin_lock(&vm_table_lock);
+	hyp_vm = get_vm_by_handle(handle);
+	if (!hyp_vm) {
+		err = -ENOENT;
+		goto err_unlock;
+	}
+
+	if (WARN_ON(hyp_page_count(hyp_vm))) {
+		err = -EBUSY;
+		goto err_unlock;
+	}
+
+	host_kvm = hyp_vm->host_kvm;
+
+	/* Ensure the VMID is clean before it can be reallocated */
+	__kvm_tlb_flush_vmid(&hyp_vm->kvm.arch.mmu);
+	remove_vm_table_entry(handle);
+	hyp_spin_unlock(&vm_table_lock);
+
+	/* Reclaim guest pages (including page-table pages) */
+	mc = &host_kvm->arch.pkvm.teardown_mc;
+	reclaim_guest_pages(hyp_vm, mc);
+	unpin_host_vcpus(hyp_vm->vcpus, hyp_vm->nr_vcpus);
+
+	/* Push the metadata pages to the teardown memcache */
+	for (idx = 0; idx < hyp_vm->nr_vcpus; ++idx) {
+		struct pkvm_hyp_vcpu *hyp_vcpu = hyp_vm->vcpus[idx];
+
+		teardown_donated_memory(mc, hyp_vcpu, sizeof(*hyp_vcpu));
+	}
+
+	vm_size = pkvm_get_hyp_vm_size(hyp_vm->kvm.created_vcpus);
+	teardown_donated_memory(mc, hyp_vm, vm_size);
+	hyp_unpin_shared_mem(host_kvm, host_kvm + 1);
+	return 0;
+
+err_unlock:
+	hyp_spin_unlock(&vm_table_lock);
+	return err;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/psci-relay.c b/arch/arm64/kvm/hyp/nvhe/psci-relay.c
new file mode 100644
index 000000000..d57bcb6ab
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/psci-relay.c
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 - Google LLC
+ * Author: David Brazdil <dbrazdil@google.com>
+ */
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+#include <uapi/linux/psci.h>
+
+#include <nvhe/memory.h>
+#include <nvhe/trap_handler.h>
+
+void kvm_hyp_cpu_entry(unsigned long r0);
+void kvm_hyp_cpu_resume(unsigned long r0);
+
+void __noreturn __host_enter(struct kvm_cpu_context *host_ctxt);
+
+/* Config options set by the host. */
+struct kvm_host_psci_config __ro_after_init kvm_host_psci_config;
+
+#define INVALID_CPU_ID	UINT_MAX
+
+struct psci_boot_args {
+	atomic_t lock;
+	unsigned long pc;
+	unsigned long r0;
+};
+
+#define PSCI_BOOT_ARGS_UNLOCKED		0
+#define PSCI_BOOT_ARGS_LOCKED		1
+
+#define PSCI_BOOT_ARGS_INIT					\
+	((struct psci_boot_args){				\
+		.lock = ATOMIC_INIT(PSCI_BOOT_ARGS_UNLOCKED),	\
+	})
+
+static DEFINE_PER_CPU(struct psci_boot_args, cpu_on_args) = PSCI_BOOT_ARGS_INIT;
+static DEFINE_PER_CPU(struct psci_boot_args, suspend_args) = PSCI_BOOT_ARGS_INIT;
+
+#define	is_psci_0_1(what, func_id)					\
+	(kvm_host_psci_config.psci_0_1_ ## what ## _implemented &&	\
+	 (func_id) == kvm_host_psci_config.function_ids_0_1.what)
+
+static bool is_psci_0_1_call(u64 func_id)
+{
+	return (is_psci_0_1(cpu_suspend, func_id) ||
+		is_psci_0_1(cpu_on, func_id) ||
+		is_psci_0_1(cpu_off, func_id) ||
+		is_psci_0_1(migrate, func_id));
+}
+
+static bool is_psci_0_2_call(u64 func_id)
+{
+	/* SMCCC reserves IDs 0x00-1F with the given 32/64-bit base for PSCI. */
+	return (PSCI_0_2_FN(0) <= func_id && func_id <= PSCI_0_2_FN(31)) ||
+	       (PSCI_0_2_FN64(0) <= func_id && func_id <= PSCI_0_2_FN64(31));
+}
+
+static unsigned long psci_call(unsigned long fn, unsigned long arg0,
+			       unsigned long arg1, unsigned long arg2)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_smc(fn, arg0, arg1, arg2, &res);
+	return res.a0;
+}
+
+static unsigned long psci_forward(struct kvm_cpu_context *host_ctxt)
+{
+	return psci_call(cpu_reg(host_ctxt, 0), cpu_reg(host_ctxt, 1),
+			 cpu_reg(host_ctxt, 2), cpu_reg(host_ctxt, 3));
+}
+
+static unsigned int find_cpu_id(u64 mpidr)
+{
+	unsigned int i;
+
+	/* Reject invalid MPIDRs */
+	if (mpidr & ~MPIDR_HWID_BITMASK)
+		return INVALID_CPU_ID;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		if (cpu_logical_map(i) == mpidr)
+			return i;
+	}
+
+	return INVALID_CPU_ID;
+}
+
+static __always_inline bool try_acquire_boot_args(struct psci_boot_args *args)
+{
+	return atomic_cmpxchg_acquire(&args->lock,
+				      PSCI_BOOT_ARGS_UNLOCKED,
+				      PSCI_BOOT_ARGS_LOCKED) ==
+		PSCI_BOOT_ARGS_UNLOCKED;
+}
+
+static __always_inline void release_boot_args(struct psci_boot_args *args)
+{
+	atomic_set_release(&args->lock, PSCI_BOOT_ARGS_UNLOCKED);
+}
+
+static int psci_cpu_on(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, mpidr, host_ctxt, 1);
+	DECLARE_REG(unsigned long, pc, host_ctxt, 2);
+	DECLARE_REG(unsigned long, r0, host_ctxt, 3);
+
+	unsigned int cpu_id;
+	struct psci_boot_args *boot_args;
+	struct kvm_nvhe_init_params *init_params;
+	int ret;
+
+	/*
+	 * Find the logical CPU ID for the given MPIDR. The search set is
+	 * the set of CPUs that were online at the point of KVM initialization.
+	 * Booting other CPUs is rejected because their cpufeatures were not
+	 * checked against the finalized capabilities. This could be relaxed
+	 * by doing the feature checks in hyp.
+	 */
+	cpu_id = find_cpu_id(mpidr);
+	if (cpu_id == INVALID_CPU_ID)
+		return PSCI_RET_INVALID_PARAMS;
+
+	boot_args = per_cpu_ptr(&cpu_on_args, cpu_id);
+	init_params = per_cpu_ptr(&kvm_init_params, cpu_id);
+
+	/* Check if the target CPU is already being booted. */
+	if (!try_acquire_boot_args(boot_args))
+		return PSCI_RET_ALREADY_ON;
+
+	boot_args->pc = pc;
+	boot_args->r0 = r0;
+	wmb();
+
+	ret = psci_call(func_id, mpidr,
+			__hyp_pa(&kvm_hyp_cpu_entry),
+			__hyp_pa(init_params));
+
+	/* If successful, the lock will be released by the target CPU. */
+	if (ret != PSCI_RET_SUCCESS)
+		release_boot_args(boot_args);
+
+	return ret;
+}
+
+static int psci_cpu_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(u64, power_state, host_ctxt, 1);
+	DECLARE_REG(unsigned long, pc, host_ctxt, 2);
+	DECLARE_REG(unsigned long, r0, host_ctxt, 3);
+
+	struct psci_boot_args *boot_args;
+	struct kvm_nvhe_init_params *init_params;
+
+	boot_args = this_cpu_ptr(&suspend_args);
+	init_params = this_cpu_ptr(&kvm_init_params);
+
+	/*
+	 * No need to acquire a lock before writing to boot_args because a core
+	 * can only suspend itself. Racy CPU_ON calls use a separate struct.
+	 */
+	boot_args->pc = pc;
+	boot_args->r0 = r0;
+
+	/*
+	 * Will either return if shallow sleep state, or wake up into the entry
+	 * point if it is a deep sleep state.
+	 */
+	return psci_call(func_id, power_state,
+			 __hyp_pa(&kvm_hyp_cpu_resume),
+			 __hyp_pa(init_params));
+}
+
+static int psci_system_suspend(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	DECLARE_REG(unsigned long, pc, host_ctxt, 1);
+	DECLARE_REG(unsigned long, r0, host_ctxt, 2);
+
+	struct psci_boot_args *boot_args;
+	struct kvm_nvhe_init_params *init_params;
+
+	boot_args = this_cpu_ptr(&suspend_args);
+	init_params = this_cpu_ptr(&kvm_init_params);
+
+	/*
+	 * No need to acquire a lock before writing to boot_args because a core
+	 * can only suspend itself. Racy CPU_ON calls use a separate struct.
+	 */
+	boot_args->pc = pc;
+	boot_args->r0 = r0;
+
+	/* Will only return on error. */
+	return psci_call(func_id,
+			 __hyp_pa(&kvm_hyp_cpu_resume),
+			 __hyp_pa(init_params), 0);
+}
+
+asmlinkage void __noreturn __kvm_host_psci_cpu_entry(bool is_cpu_on)
+{
+	struct psci_boot_args *boot_args;
+	struct kvm_cpu_context *host_ctxt;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+
+	if (is_cpu_on)
+		boot_args = this_cpu_ptr(&cpu_on_args);
+	else
+		boot_args = this_cpu_ptr(&suspend_args);
+
+	cpu_reg(host_ctxt, 0) = boot_args->r0;
+	write_sysreg_el2(boot_args->pc, SYS_ELR);
+
+	if (is_cpu_on)
+		release_boot_args(boot_args);
+
+	__host_enter(host_ctxt);
+}
+
+static unsigned long psci_0_1_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	if (is_psci_0_1(cpu_off, func_id) || is_psci_0_1(migrate, func_id))
+		return psci_forward(host_ctxt);
+	if (is_psci_0_1(cpu_on, func_id))
+		return psci_cpu_on(func_id, host_ctxt);
+	if (is_psci_0_1(cpu_suspend, func_id))
+		return psci_cpu_suspend(func_id, host_ctxt);
+
+	return PSCI_RET_NOT_SUPPORTED;
+}
+
+static unsigned long psci_0_2_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	switch (func_id) {
+	case PSCI_0_2_FN_PSCI_VERSION:
+	case PSCI_0_2_FN_CPU_OFF:
+	case PSCI_0_2_FN64_AFFINITY_INFO:
+	case PSCI_0_2_FN64_MIGRATE:
+	case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+	case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU:
+		return psci_forward(host_ctxt);
+	/*
+	 * SYSTEM_OFF/RESET should not return according to the spec.
+	 * Allow it so as to stay robust to broken firmware.
+	 */
+	case PSCI_0_2_FN_SYSTEM_OFF:
+	case PSCI_0_2_FN_SYSTEM_RESET:
+		return psci_forward(host_ctxt);
+	case PSCI_0_2_FN64_CPU_SUSPEND:
+		return psci_cpu_suspend(func_id, host_ctxt);
+	case PSCI_0_2_FN64_CPU_ON:
+		return psci_cpu_on(func_id, host_ctxt);
+	default:
+		return PSCI_RET_NOT_SUPPORTED;
+	}
+}
+
+static unsigned long psci_1_0_handler(u64 func_id, struct kvm_cpu_context *host_ctxt)
+{
+	switch (func_id) {
+	case PSCI_1_0_FN_PSCI_FEATURES:
+	case PSCI_1_0_FN_SET_SUSPEND_MODE:
+	case PSCI_1_1_FN64_SYSTEM_RESET2:
+		return psci_forward(host_ctxt);
+	case PSCI_1_0_FN64_SYSTEM_SUSPEND:
+		return psci_system_suspend(func_id, host_ctxt);
+	default:
+		return psci_0_2_handler(func_id, host_ctxt);
+	}
+}
+
+bool kvm_host_psci_handler(struct kvm_cpu_context *host_ctxt, u32 func_id)
+{
+	unsigned long ret;
+
+	switch (kvm_host_psci_config.version) {
+	case PSCI_VERSION(0, 1):
+		if (!is_psci_0_1_call(func_id))
+			return false;
+		ret = psci_0_1_handler(func_id, host_ctxt);
+		break;
+	case PSCI_VERSION(0, 2):
+		if (!is_psci_0_2_call(func_id))
+			return false;
+		ret = psci_0_2_handler(func_id, host_ctxt);
+		break;
+	default:
+		if (!is_psci_0_2_call(func_id))
+			return false;
+		ret = psci_1_0_handler(func_id, host_ctxt);
+		break;
+	}
+
+	cpu_reg(host_ctxt, 0) = ret;
+	cpu_reg(host_ctxt, 1) = 0;
+	cpu_reg(host_ctxt, 2) = 0;
+	cpu_reg(host_ctxt, 3) = 0;
+	return true;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
new file mode 100644
index 000000000..0d5e0a89d
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_pgtable.h>
+#include <asm/kvm_pkvm.h>
+
+#include <nvhe/early_alloc.h>
+#include <nvhe/ffa.h>
+#include <nvhe/fixed_config.h>
+#include <nvhe/gfp.h>
+#include <nvhe/memory.h>
+#include <nvhe/mem_protect.h>
+#include <nvhe/mm.h>
+#include <nvhe/pkvm.h>
+#include <nvhe/trap_handler.h>
+
+unsigned long hyp_nr_cpus;
+
+#define hyp_percpu_size ((unsigned long)__per_cpu_end - \
+			 (unsigned long)__per_cpu_start)
+
+static void *vmemmap_base;
+static void *vm_table_base;
+static void *hyp_pgt_base;
+static void *host_s2_pgt_base;
+static void *ffa_proxy_pages;
+static struct kvm_pgtable_mm_ops pkvm_pgtable_mm_ops;
+static struct hyp_pool hpool;
+
+static int divide_memory_pool(void *virt, unsigned long size)
+{
+	unsigned long nr_pages;
+
+	hyp_early_alloc_init(virt, size);
+
+	nr_pages = hyp_vmemmap_pages(sizeof(struct hyp_page));
+	vmemmap_base = hyp_early_alloc_contig(nr_pages);
+	if (!vmemmap_base)
+		return -ENOMEM;
+
+	nr_pages = hyp_vm_table_pages();
+	vm_table_base = hyp_early_alloc_contig(nr_pages);
+	if (!vm_table_base)
+		return -ENOMEM;
+
+	nr_pages = hyp_s1_pgtable_pages();
+	hyp_pgt_base = hyp_early_alloc_contig(nr_pages);
+	if (!hyp_pgt_base)
+		return -ENOMEM;
+
+	nr_pages = host_s2_pgtable_pages();
+	host_s2_pgt_base = hyp_early_alloc_contig(nr_pages);
+	if (!host_s2_pgt_base)
+		return -ENOMEM;
+
+	nr_pages = hyp_ffa_proxy_pages();
+	ffa_proxy_pages = hyp_early_alloc_contig(nr_pages);
+	if (!ffa_proxy_pages)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
+				 unsigned long *per_cpu_base,
+				 u32 hyp_va_bits)
+{
+	void *start, *end, *virt = hyp_phys_to_virt(phys);
+	unsigned long pgt_size = hyp_s1_pgtable_pages() << PAGE_SHIFT;
+	enum kvm_pgtable_prot prot;
+	int ret, i;
+
+	/* Recreate the hyp page-table using the early page allocator */
+	hyp_early_alloc_init(hyp_pgt_base, pgt_size);
+	ret = kvm_pgtable_hyp_init(&pkvm_pgtable, hyp_va_bits,
+				   &hyp_early_alloc_mm_ops);
+	if (ret)
+		return ret;
+
+	ret = hyp_create_idmap(hyp_va_bits);
+	if (ret)
+		return ret;
+
+	ret = hyp_map_vectors();
+	if (ret)
+		return ret;
+
+	ret = hyp_back_vmemmap(hyp_virt_to_phys(vmemmap_base));
+	if (ret)
+		return ret;
+
+	ret = pkvm_create_mappings(__hyp_text_start, __hyp_text_end, PAGE_HYP_EXEC);
+	if (ret)
+		return ret;
+
+	ret = pkvm_create_mappings(__hyp_rodata_start, __hyp_rodata_end, PAGE_HYP_RO);
+	if (ret)
+		return ret;
+
+	ret = pkvm_create_mappings(__hyp_bss_start, __hyp_bss_end, PAGE_HYP);
+	if (ret)
+		return ret;
+
+	ret = pkvm_create_mappings(virt, virt + size, PAGE_HYP);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < hyp_nr_cpus; i++) {
+		struct kvm_nvhe_init_params *params = per_cpu_ptr(&kvm_init_params, i);
+
+		start = (void *)kern_hyp_va(per_cpu_base[i]);
+		end = start + PAGE_ALIGN(hyp_percpu_size);
+		ret = pkvm_create_mappings(start, end, PAGE_HYP);
+		if (ret)
+			return ret;
+
+		ret = pkvm_create_stack(params->stack_pa, &params->stack_hyp_va);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Map the host sections RO in the hypervisor, but transfer the
+	 * ownership from the host to the hypervisor itself to make sure they
+	 * can't be donated or shared with another entity.
+	 *
+	 * The ownership transition requires matching changes in the host
+	 * stage-2. This will be done later (see finalize_host_mappings()) once
+	 * the hyp_vmemmap is addressable.
+	 */
+	prot = pkvm_mkstate(PAGE_HYP_RO, PKVM_PAGE_SHARED_OWNED);
+	ret = pkvm_create_mappings(&kvm_vgic_global_state,
+				   &kvm_vgic_global_state + 1, prot);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void update_nvhe_init_params(void)
+{
+	struct kvm_nvhe_init_params *params;
+	unsigned long i;
+
+	for (i = 0; i < hyp_nr_cpus; i++) {
+		params = per_cpu_ptr(&kvm_init_params, i);
+		params->pgd_pa = __hyp_pa(pkvm_pgtable.pgd);
+		dcache_clean_inval_poc((unsigned long)params,
+				    (unsigned long)params + sizeof(*params));
+	}
+}
+
+static void *hyp_zalloc_hyp_page(void *arg)
+{
+	return hyp_alloc_pages(&hpool, 0);
+}
+
+static void hpool_get_page(void *addr)
+{
+	hyp_get_page(&hpool, addr);
+}
+
+static void hpool_put_page(void *addr)
+{
+	hyp_put_page(&hpool, addr);
+}
+
+static int fix_host_ownership_walker(const struct kvm_pgtable_visit_ctx *ctx,
+				     enum kvm_pgtable_walk_flags visit)
+{
+	enum kvm_pgtable_prot prot;
+	enum pkvm_page_state state;
+	phys_addr_t phys;
+
+	if (!kvm_pte_valid(ctx->old))
+		return 0;
+
+	if (ctx->level != (KVM_PGTABLE_MAX_LEVELS - 1))
+		return -EINVAL;
+
+	phys = kvm_pte_to_phys(ctx->old);
+	if (!addr_is_memory(phys))
+		return -EINVAL;
+
+	/*
+	 * Adjust the host stage-2 mappings to match the ownership attributes
+	 * configured in the hypervisor stage-1.
+	 */
+	state = pkvm_getstate(kvm_pgtable_hyp_pte_prot(ctx->old));
+	switch (state) {
+	case PKVM_PAGE_OWNED:
+		return host_stage2_set_owner_locked(phys, PAGE_SIZE, PKVM_ID_HYP);
+	case PKVM_PAGE_SHARED_OWNED:
+		prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_BORROWED);
+		break;
+	case PKVM_PAGE_SHARED_BORROWED:
+		prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_OWNED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return host_stage2_idmap_locked(phys, PAGE_SIZE, prot);
+}
+
+static int fix_hyp_pgtable_refcnt_walker(const struct kvm_pgtable_visit_ctx *ctx,
+					 enum kvm_pgtable_walk_flags visit)
+{
+	/*
+	 * Fix-up the refcount for the page-table pages as the early allocator
+	 * was unable to access the hyp_vmemmap and so the buddy allocator has
+	 * initialised the refcount to '1'.
+	 */
+	if (kvm_pte_valid(ctx->old))
+		ctx->mm_ops->get_page(ctx->ptep);
+
+	return 0;
+}
+
+static int fix_host_ownership(void)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= fix_host_ownership_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+	};
+	int i, ret;
+
+	for (i = 0; i < hyp_memblock_nr; i++) {
+		struct memblock_region *reg = &hyp_memory[i];
+		u64 start = (u64)hyp_phys_to_virt(reg->base);
+
+		ret = kvm_pgtable_walk(&pkvm_pgtable, start, reg->size, &walker);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int fix_hyp_pgtable_refcnt(void)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= fix_hyp_pgtable_refcnt_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
+		.arg	= pkvm_pgtable.mm_ops,
+	};
+
+	return kvm_pgtable_walk(&pkvm_pgtable, 0, BIT(pkvm_pgtable.ia_bits),
+				&walker);
+}
+
+void __noreturn __pkvm_init_finalise(void)
+{
+	struct kvm_host_data *host_data = this_cpu_ptr(&kvm_host_data);
+	struct kvm_cpu_context *host_ctxt = &host_data->host_ctxt;
+	unsigned long nr_pages, reserved_pages, pfn;
+	int ret;
+
+	/* Now that the vmemmap is backed, install the full-fledged allocator */
+	pfn = hyp_virt_to_pfn(hyp_pgt_base);
+	nr_pages = hyp_s1_pgtable_pages();
+	reserved_pages = hyp_early_alloc_nr_used_pages();
+	ret = hyp_pool_init(&hpool, pfn, nr_pages, reserved_pages);
+	if (ret)
+		goto out;
+
+	ret = kvm_host_prepare_stage2(host_s2_pgt_base);
+	if (ret)
+		goto out;
+
+	pkvm_pgtable_mm_ops = (struct kvm_pgtable_mm_ops) {
+		.zalloc_page = hyp_zalloc_hyp_page,
+		.phys_to_virt = hyp_phys_to_virt,
+		.virt_to_phys = hyp_virt_to_phys,
+		.get_page = hpool_get_page,
+		.put_page = hpool_put_page,
+		.page_count = hyp_page_count,
+	};
+	pkvm_pgtable.mm_ops = &pkvm_pgtable_mm_ops;
+
+	ret = fix_host_ownership();
+	if (ret)
+		goto out;
+
+	ret = fix_hyp_pgtable_refcnt();
+	if (ret)
+		goto out;
+
+	ret = hyp_create_pcpu_fixmap();
+	if (ret)
+		goto out;
+
+	ret = hyp_ffa_init(ffa_proxy_pages);
+	if (ret)
+		goto out;
+
+	pkvm_hyp_vm_table_init(vm_table_base);
+out:
+	/*
+	 * We tail-called to here from handle___pkvm_init() and will not return,
+	 * so make sure to propagate the return value to the host.
+	 */
+	cpu_reg(host_ctxt, 1) = ret;
+
+	__host_enter(host_ctxt);
+}
+
+int __pkvm_init(phys_addr_t phys, unsigned long size, unsigned long nr_cpus,
+		unsigned long *per_cpu_base, u32 hyp_va_bits)
+{
+	struct kvm_nvhe_init_params *params;
+	void *virt = hyp_phys_to_virt(phys);
+	void (*fn)(phys_addr_t params_pa, void *finalize_fn_va);
+	int ret;
+
+	BUG_ON(kvm_check_pvm_sysreg_table());
+
+	if (!PAGE_ALIGNED(phys) || !PAGE_ALIGNED(size))
+		return -EINVAL;
+
+	hyp_spin_lock_init(&pkvm_pgd_lock);
+	hyp_nr_cpus = nr_cpus;
+
+	ret = divide_memory_pool(virt, size);
+	if (ret)
+		return ret;
+
+	ret = recreate_hyp_mappings(phys, size, per_cpu_base, hyp_va_bits);
+	if (ret)
+		return ret;
+
+	update_nvhe_init_params();
+
+	/* Jump in the idmap page to switch to the new page-tables */
+	params = this_cpu_ptr(&kvm_init_params);
+	fn = (typeof(fn))__hyp_pa(__pkvm_init_switch_pgd);
+	fn(__hyp_pa(params), __pkvm_init_finalise);
+
+	unreachable();
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/stacktrace.c b/arch/arm64/kvm/hyp/nvhe/stacktrace.c
new file mode 100644
index 000000000..ed6b58b19
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/stacktrace.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * KVM nVHE hypervisor stack tracing support.
+ *
+ * Copyright (C) 2022 Google LLC
+ */
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+#include <asm/memory.h>
+#include <asm/percpu.h>
+
+DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)], overflow_stack)
+	__aligned(16);
+
+DEFINE_PER_CPU(struct kvm_nvhe_stacktrace_info, kvm_stacktrace_info);
+
+/*
+ * hyp_prepare_backtrace - Prepare non-protected nVHE backtrace.
+ *
+ * @fp : frame pointer at which to start the unwinding.
+ * @pc : program counter at which to start the unwinding.
+ *
+ * Save the information needed by the host to unwind the non-protected
+ * nVHE hypervisor stack in EL1.
+ */
+static void hyp_prepare_backtrace(unsigned long fp, unsigned long pc)
+{
+	struct kvm_nvhe_stacktrace_info *stacktrace_info = this_cpu_ptr(&kvm_stacktrace_info);
+	struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params);
+
+	stacktrace_info->stack_base = (unsigned long)(params->stack_hyp_va - PAGE_SIZE);
+	stacktrace_info->overflow_stack_base = (unsigned long)this_cpu_ptr(overflow_stack);
+	stacktrace_info->fp = fp;
+	stacktrace_info->pc = pc;
+}
+
+#ifdef CONFIG_PROTECTED_NVHE_STACKTRACE
+#include <asm/stacktrace/nvhe.h>
+
+DEFINE_PER_CPU(unsigned long [NVHE_STACKTRACE_SIZE/sizeof(long)], pkvm_stacktrace);
+
+static struct stack_info stackinfo_get_overflow(void)
+{
+	unsigned long low = (unsigned long)this_cpu_ptr(overflow_stack);
+	unsigned long high = low + OVERFLOW_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static struct stack_info stackinfo_get_hyp(void)
+{
+	struct kvm_nvhe_init_params *params = this_cpu_ptr(&kvm_init_params);
+	unsigned long high = params->stack_hyp_va;
+	unsigned long low = high - PAGE_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static int unwind_next(struct unwind_state *state)
+{
+	return unwind_next_frame_record(state);
+}
+
+static void notrace unwind(struct unwind_state *state,
+			   stack_trace_consume_fn consume_entry,
+			   void *cookie)
+{
+	while (1) {
+		int ret;
+
+		if (!consume_entry(cookie, state->pc))
+			break;
+		ret = unwind_next(state);
+		if (ret < 0)
+			break;
+	}
+}
+
+/*
+ * pkvm_save_backtrace_entry - Saves a protected nVHE HYP stacktrace entry
+ *
+ * @arg    : index of the entry in the stacktrace buffer
+ * @where  : the program counter corresponding to the stack frame
+ *
+ * Save the return address of a stack frame to the shared stacktrace buffer.
+ * The host can access this shared buffer from EL1 to dump the backtrace.
+ */
+static bool pkvm_save_backtrace_entry(void *arg, unsigned long where)
+{
+	unsigned long *stacktrace = this_cpu_ptr(pkvm_stacktrace);
+	int *idx = (int *)arg;
+
+	/*
+	 * Need 2 free slots: 1 for current entry and 1 for the
+	 * delimiter.
+	 */
+	if (*idx > ARRAY_SIZE(pkvm_stacktrace) - 2)
+		return false;
+
+	stacktrace[*idx] = where;
+	stacktrace[++*idx] = 0UL;
+
+	return true;
+}
+
+/*
+ * pkvm_save_backtrace - Saves the protected nVHE HYP stacktrace
+ *
+ * @fp : frame pointer at which to start the unwinding.
+ * @pc : program counter at which to start the unwinding.
+ *
+ * Save the unwinded stack addresses to the shared stacktrace buffer.
+ * The host can access this shared buffer from EL1 to dump the backtrace.
+ */
+static void pkvm_save_backtrace(unsigned long fp, unsigned long pc)
+{
+	struct stack_info stacks[] = {
+		stackinfo_get_overflow(),
+		stackinfo_get_hyp(),
+	};
+	struct unwind_state state = {
+		.stacks = stacks,
+		.nr_stacks = ARRAY_SIZE(stacks),
+	};
+	int idx = 0;
+
+	kvm_nvhe_unwind_init(&state, fp, pc);
+
+	unwind(&state, pkvm_save_backtrace_entry, &idx);
+}
+#else /* !CONFIG_PROTECTED_NVHE_STACKTRACE */
+static void pkvm_save_backtrace(unsigned long fp, unsigned long pc)
+{
+}
+#endif /* CONFIG_PROTECTED_NVHE_STACKTRACE */
+
+/*
+ * kvm_nvhe_prepare_backtrace - prepare to dump the nVHE backtrace
+ *
+ * @fp : frame pointer at which to start the unwinding.
+ * @pc : program counter at which to start the unwinding.
+ *
+ * Saves the information needed by the host to dump the nVHE hypervisor
+ * backtrace.
+ */
+void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc)
+{
+	if (is_protected_kvm_enabled())
+		pkvm_save_backtrace(fp, pc);
+	else
+		hyp_prepare_backtrace(fp, pc);
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
new file mode 100644
index 000000000..c353a06ee
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -0,0 +1,394 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/switch.h>
+#include <hyp/sysreg-sr.h>
+
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+#include <linux/types.h>
+#include <linux/jump_label.h>
+#include <uapi/linux/psci.h>
+
+#include <kvm/arm_psci.h>
+
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/kprobes.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/fpsimd.h>
+#include <asm/debug-monitors.h>
+#include <asm/processor.h>
+
+#include <nvhe/fixed_config.h>
+#include <nvhe/mem_protect.h>
+
+/* Non-VHE specific context */
+DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data);
+DEFINE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
+DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
+
+extern void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc);
+
+static void __activate_traps(struct kvm_vcpu *vcpu)
+{
+	u64 val;
+
+	___activate_traps(vcpu);
+	__activate_traps_common(vcpu);
+
+	val = vcpu->arch.cptr_el2;
+	val |= CPTR_EL2_TAM;	/* Same bit irrespective of E2H */
+	val |= has_hvhe() ? CPACR_EL1_TTA : CPTR_EL2_TTA;
+	if (cpus_have_final_cap(ARM64_SME)) {
+		if (has_hvhe())
+			val &= ~(CPACR_EL1_SMEN_EL1EN | CPACR_EL1_SMEN_EL0EN);
+		else
+			val |= CPTR_EL2_TSM;
+	}
+
+	if (!guest_owns_fp_regs(vcpu)) {
+		if (has_hvhe())
+			val &= ~(CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN |
+				 CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN);
+		else
+			val |= CPTR_EL2_TFP | CPTR_EL2_TZ;
+
+		__activate_traps_fpsimd32(vcpu);
+	}
+
+	kvm_write_cptr_el2(val);
+	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el2);
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt;
+
+		isb();
+		/*
+		 * At this stage, and thanks to the above isb(), S2 is
+		 * configured and enabled. We can now restore the guest's S1
+		 * configuration: SCTLR, and only then TCR.
+		 */
+		write_sysreg_el1(ctxt_sys_reg(ctxt, SCTLR_EL1),	SYS_SCTLR);
+		isb();
+		write_sysreg_el1(ctxt_sys_reg(ctxt, TCR_EL1),	SYS_TCR);
+	}
+}
+
+static void __deactivate_traps(struct kvm_vcpu *vcpu)
+{
+	extern char __kvm_hyp_host_vector[];
+
+	___deactivate_traps(vcpu);
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		u64 val;
+
+		/*
+		 * Set the TCR and SCTLR registers in the exact opposite
+		 * sequence as __activate_traps (first prevent walks,
+		 * then force the MMU on). A generous sprinkling of isb()
+		 * ensure that things happen in this exact order.
+		 */
+		val = read_sysreg_el1(SYS_TCR);
+		write_sysreg_el1(val | TCR_EPD1_MASK | TCR_EPD0_MASK, SYS_TCR);
+		isb();
+		val = read_sysreg_el1(SYS_SCTLR);
+		write_sysreg_el1(val | SCTLR_ELx_M, SYS_SCTLR);
+		isb();
+	}
+
+	__deactivate_traps_common(vcpu);
+
+	write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2);
+
+	kvm_reset_cptr_el2(vcpu);
+	write_sysreg(__kvm_hyp_host_vector, vbar_el2);
+}
+
+/* Save VGICv3 state on non-VHE systems */
+static void __hyp_vgic_save_state(struct kvm_vcpu *vcpu)
+{
+	if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) {
+		__vgic_v3_save_state(&vcpu->arch.vgic_cpu.vgic_v3);
+		__vgic_v3_deactivate_traps(&vcpu->arch.vgic_cpu.vgic_v3);
+	}
+}
+
+/* Restore VGICv3 state on non-VHE systems */
+static void __hyp_vgic_restore_state(struct kvm_vcpu *vcpu)
+{
+	if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) {
+		__vgic_v3_activate_traps(&vcpu->arch.vgic_cpu.vgic_v3);
+		__vgic_v3_restore_state(&vcpu->arch.vgic_cpu.vgic_v3);
+	}
+}
+
+/*
+ * Disable host events, enable guest events
+ */
+#ifdef CONFIG_HW_PERF_EVENTS
+static bool __pmu_switch_to_guest(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu_events *pmu = &vcpu->arch.pmu.events;
+
+	if (pmu->events_host)
+		write_sysreg(pmu->events_host, pmcntenclr_el0);
+
+	if (pmu->events_guest)
+		write_sysreg(pmu->events_guest, pmcntenset_el0);
+
+	return (pmu->events_host || pmu->events_guest);
+}
+
+/*
+ * Disable guest events, enable host events
+ */
+static void __pmu_switch_to_host(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu_events *pmu = &vcpu->arch.pmu.events;
+
+	if (pmu->events_guest)
+		write_sysreg(pmu->events_guest, pmcntenclr_el0);
+
+	if (pmu->events_host)
+		write_sysreg(pmu->events_host, pmcntenset_el0);
+}
+#else
+#define __pmu_switch_to_guest(v)	({ false; })
+#define __pmu_switch_to_host(v)		do {} while (0)
+#endif
+
+/*
+ * Handler for protected VM MSR, MRS or System instruction execution in AArch64.
+ *
+ * Returns true if the hypervisor has handled the exit, and control should go
+ * back to the guest, or false if it hasn't.
+ */
+static bool kvm_handle_pvm_sys64(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	/*
+	 * Make sure we handle the exit for workarounds and ptrauth
+	 * before the pKVM handling, as the latter could decide to
+	 * UNDEF.
+	 */
+	return (kvm_hyp_handle_sysreg(vcpu, exit_code) ||
+		kvm_handle_pvm_sysreg(vcpu, exit_code));
+}
+
+static const exit_handler_fn hyp_exit_handlers[] = {
+	[0 ... ESR_ELx_EC_MAX]		= NULL,
+	[ESR_ELx_EC_CP15_32]		= kvm_hyp_handle_cp15_32,
+	[ESR_ELx_EC_SYS64]		= kvm_hyp_handle_sysreg,
+	[ESR_ELx_EC_SVE]		= kvm_hyp_handle_fpsimd,
+	[ESR_ELx_EC_FP_ASIMD]		= kvm_hyp_handle_fpsimd,
+	[ESR_ELx_EC_IABT_LOW]		= kvm_hyp_handle_iabt_low,
+	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
+	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
+	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
+};
+
+static const exit_handler_fn pvm_exit_handlers[] = {
+	[0 ... ESR_ELx_EC_MAX]		= NULL,
+	[ESR_ELx_EC_SYS64]		= kvm_handle_pvm_sys64,
+	[ESR_ELx_EC_SVE]		= kvm_handle_pvm_restricted,
+	[ESR_ELx_EC_FP_ASIMD]		= kvm_hyp_handle_fpsimd,
+	[ESR_ELx_EC_IABT_LOW]		= kvm_hyp_handle_iabt_low,
+	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
+	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
+	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
+};
+
+static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
+{
+	if (unlikely(kvm_vm_is_protected(kern_hyp_va(vcpu->kvm))))
+		return pvm_exit_handlers;
+
+	return hyp_exit_handlers;
+}
+
+/*
+ * Some guests (e.g., protected VMs) are not be allowed to run in AArch32.
+ * The ARMv8 architecture does not give the hypervisor a mechanism to prevent a
+ * guest from dropping to AArch32 EL0 if implemented by the CPU. If the
+ * hypervisor spots a guest in such a state ensure it is handled, and don't
+ * trust the host to spot or fix it.  The check below is based on the one in
+ * kvm_arch_vcpu_ioctl_run().
+ *
+ * Returns false if the guest ran in AArch32 when it shouldn't have, and
+ * thus should exit to the host, or true if a the guest run loop can continue.
+ */
+static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
+
+	if (kvm_vm_is_protected(kvm) && vcpu_mode_is_32bit(vcpu)) {
+		/*
+		 * As we have caught the guest red-handed, decide that it isn't
+		 * fit for purpose anymore by making the vcpu invalid. The VMM
+		 * can try and fix it by re-initializing the vcpu with
+		 * KVM_ARM_VCPU_INIT, however, this is likely not possible for
+		 * protected VMs.
+		 */
+		vcpu_clear_flag(vcpu, VCPU_INITIALIZED);
+		*exit_code &= BIT(ARM_EXIT_WITH_SERROR_BIT);
+		*exit_code |= ARM_EXCEPTION_IL;
+	}
+}
+
+/* Switch to the guest for legacy non-VHE systems */
+int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	struct kvm_s2_mmu *mmu;
+	bool pmu_switch_needed;
+	u64 exit_code;
+
+	/*
+	 * Having IRQs masked via PMR when entering the guest means the GIC
+	 * will not signal the CPU of interrupts of lower priority, and the
+	 * only way to get out will be via guest exceptions.
+	 * Naturally, we want to avoid this.
+	 */
+	if (system_uses_irq_prio_masking()) {
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+		pmr_sync();
+	}
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	host_ctxt->__hyp_running_vcpu = vcpu;
+	guest_ctxt = &vcpu->arch.ctxt;
+
+	pmu_switch_needed = __pmu_switch_to_guest(vcpu);
+
+	__sysreg_save_state_nvhe(host_ctxt);
+	/*
+	 * We must flush and disable the SPE buffer for nVHE, as
+	 * the translation regime(EL1&0) is going to be loaded with
+	 * that of the guest. And we must do this before we change the
+	 * translation regime to EL2 (via MDCR_EL2_E2PB == 0) and
+	 * before we load guest Stage1.
+	 */
+	__debug_save_host_buffers_nvhe(vcpu);
+
+	/*
+	 * We're about to restore some new MMU state. Make sure
+	 * ongoing page-table walks that have started before we
+	 * trapped to EL2 have completed. This also synchronises the
+	 * above disabling of SPE and TRBE.
+	 *
+	 * See DDI0487I.a D8.1.5 "Out-of-context translation regimes",
+	 * rule R_LFHQG and subsequent information statements.
+	 */
+	dsb(nsh);
+
+	__kvm_adjust_pc(vcpu);
+
+	/*
+	 * We must restore the 32-bit state before the sysregs, thanks
+	 * to erratum #852523 (Cortex-A57) or #853709 (Cortex-A72).
+	 *
+	 * Also, and in order to be able to deal with erratum #1319537 (A57)
+	 * and #1319367 (A72), we must ensure that all VM-related sysreg are
+	 * restored before we enable S2 translation.
+	 */
+	__sysreg32_restore_state(vcpu);
+	__sysreg_restore_state_nvhe(guest_ctxt);
+
+	mmu = kern_hyp_va(vcpu->arch.hw_mmu);
+	__load_stage2(mmu, kern_hyp_va(mmu->arch));
+	__activate_traps(vcpu);
+
+	__hyp_vgic_restore_state(vcpu);
+	__timer_enable_traps(vcpu);
+
+	__debug_switch_to_guest(vcpu);
+
+	do {
+		/* Jump in the fire! */
+		exit_code = __guest_enter(vcpu);
+
+		/* And we're baaack! */
+	} while (fixup_guest_exit(vcpu, &exit_code));
+
+	__sysreg_save_state_nvhe(guest_ctxt);
+	__sysreg32_save_state(vcpu);
+	__timer_disable_traps(vcpu);
+	__hyp_vgic_save_state(vcpu);
+
+	/*
+	 * Same thing as before the guest run: we're about to switch
+	 * the MMU context, so let's make sure we don't have any
+	 * ongoing EL1&0 translations.
+	 */
+	dsb(nsh);
+
+	__deactivate_traps(vcpu);
+	__load_host_stage2();
+
+	__sysreg_restore_state_nvhe(host_ctxt);
+
+	if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED)
+		__fpsimd_save_fpexc32(vcpu);
+
+	__debug_switch_to_host(vcpu);
+	/*
+	 * This must come after restoring the host sysregs, since a non-VHE
+	 * system may enable SPE here and make use of the TTBRs.
+	 */
+	__debug_restore_host_buffers_nvhe(vcpu);
+
+	if (pmu_switch_needed)
+		__pmu_switch_to_host(vcpu);
+
+	/* Returning to host will clear PSR.I, remask PMR if needed */
+	if (system_uses_irq_prio_masking())
+		gic_write_pmr(GIC_PRIO_IRQOFF);
+
+	host_ctxt->__hyp_running_vcpu = NULL;
+
+	return exit_code;
+}
+
+asmlinkage void __noreturn hyp_panic(void)
+{
+	u64 spsr = read_sysreg_el2(SYS_SPSR);
+	u64 elr = read_sysreg_el2(SYS_ELR);
+	u64 par = read_sysreg_par();
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_vcpu *vcpu;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	vcpu = host_ctxt->__hyp_running_vcpu;
+
+	if (vcpu) {
+		__timer_disable_traps(vcpu);
+		__deactivate_traps(vcpu);
+		__load_host_stage2();
+		__sysreg_restore_state_nvhe(host_ctxt);
+	}
+
+	/* Prepare to dump kvm nvhe hyp stacktrace */
+	kvm_nvhe_prepare_backtrace((unsigned long)__builtin_frame_address(0),
+				   _THIS_IP_);
+
+	__hyp_do_panic(host_ctxt, spsr, elr, par);
+	unreachable();
+}
+
+asmlinkage void __noreturn hyp_panic_bad_stack(void)
+{
+	hyp_panic();
+}
+
+asmlinkage void kvm_unexpected_el2_exception(void)
+{
+	__kvm_unexpected_el2_exception();
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
new file mode 100644
index 000000000..edd969a1f
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Google LLC
+ * Author: Fuad Tabba <tabba@google.com>
+ */
+
+#include <linux/irqchip/arm-gic-v3.h>
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+
+#include <hyp/adjust_pc.h>
+
+#include <nvhe/fixed_config.h>
+
+#include "../../sys_regs.h"
+
+/*
+ * Copies of the host's CPU features registers holding sanitized values at hyp.
+ */
+u64 id_aa64pfr0_el1_sys_val;
+u64 id_aa64pfr1_el1_sys_val;
+u64 id_aa64isar0_el1_sys_val;
+u64 id_aa64isar1_el1_sys_val;
+u64 id_aa64isar2_el1_sys_val;
+u64 id_aa64mmfr0_el1_sys_val;
+u64 id_aa64mmfr1_el1_sys_val;
+u64 id_aa64mmfr2_el1_sys_val;
+u64 id_aa64smfr0_el1_sys_val;
+
+/*
+ * Inject an unknown/undefined exception to an AArch64 guest while most of its
+ * sysregs are live.
+ */
+static void inject_undef64(struct kvm_vcpu *vcpu)
+{
+	u64 esr = (ESR_ELx_EC_UNKNOWN << ESR_ELx_EC_SHIFT);
+
+	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
+	*vcpu_cpsr(vcpu) = read_sysreg_el2(SYS_SPSR);
+
+	kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
+
+	__kvm_adjust_pc(vcpu);
+
+	write_sysreg_el1(esr, SYS_ESR);
+	write_sysreg_el1(read_sysreg_el2(SYS_ELR), SYS_ELR);
+	write_sysreg_el2(*vcpu_pc(vcpu), SYS_ELR);
+	write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR);
+}
+
+/*
+ * Returns the restricted features values of the feature register based on the
+ * limitations in restrict_fields.
+ * A feature id field value of 0b0000 does not impose any restrictions.
+ * Note: Use only for unsigned feature field values.
+ */
+static u64 get_restricted_features_unsigned(u64 sys_reg_val,
+					    u64 restrict_fields)
+{
+	u64 value = 0UL;
+	u64 mask = GENMASK_ULL(ARM64_FEATURE_FIELD_BITS - 1, 0);
+
+	/*
+	 * According to the Arm Architecture Reference Manual, feature fields
+	 * use increasing values to indicate increases in functionality.
+	 * Iterate over the restricted feature fields and calculate the minimum
+	 * unsigned value between the one supported by the system, and what the
+	 * value is being restricted to.
+	 */
+	while (sys_reg_val && restrict_fields) {
+		value |= min(sys_reg_val & mask, restrict_fields & mask);
+		sys_reg_val &= ~mask;
+		restrict_fields &= ~mask;
+		mask <<= ARM64_FEATURE_FIELD_BITS;
+	}
+
+	return value;
+}
+
+/*
+ * Functions that return the value of feature id registers for protected VMs
+ * based on allowed features, system features, and KVM support.
+ */
+
+static u64 get_pvm_id_aa64pfr0(const struct kvm_vcpu *vcpu)
+{
+	u64 set_mask = 0;
+	u64 allow_mask = PVM_ID_AA64PFR0_ALLOW;
+
+	set_mask |= get_restricted_features_unsigned(id_aa64pfr0_el1_sys_val,
+		PVM_ID_AA64PFR0_RESTRICT_UNSIGNED);
+
+	return (id_aa64pfr0_el1_sys_val & allow_mask) | set_mask;
+}
+
+static u64 get_pvm_id_aa64pfr1(const struct kvm_vcpu *vcpu)
+{
+	const struct kvm *kvm = (const struct kvm *)kern_hyp_va(vcpu->kvm);
+	u64 allow_mask = PVM_ID_AA64PFR1_ALLOW;
+
+	if (!kvm_has_mte(kvm))
+		allow_mask &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE);
+
+	return id_aa64pfr1_el1_sys_val & allow_mask;
+}
+
+static u64 get_pvm_id_aa64zfr0(const struct kvm_vcpu *vcpu)
+{
+	/*
+	 * No support for Scalable Vectors, therefore, hyp has no sanitized
+	 * copy of the feature id register.
+	 */
+	BUILD_BUG_ON(PVM_ID_AA64ZFR0_ALLOW != 0ULL);
+	return 0;
+}
+
+static u64 get_pvm_id_aa64dfr0(const struct kvm_vcpu *vcpu)
+{
+	/*
+	 * No support for debug, including breakpoints, and watchpoints,
+	 * therefore, pKVM has no sanitized copy of the feature id register.
+	 */
+	BUILD_BUG_ON(PVM_ID_AA64DFR0_ALLOW != 0ULL);
+	return 0;
+}
+
+static u64 get_pvm_id_aa64dfr1(const struct kvm_vcpu *vcpu)
+{
+	/*
+	 * No support for debug, therefore, hyp has no sanitized copy of the
+	 * feature id register.
+	 */
+	BUILD_BUG_ON(PVM_ID_AA64DFR1_ALLOW != 0ULL);
+	return 0;
+}
+
+static u64 get_pvm_id_aa64afr0(const struct kvm_vcpu *vcpu)
+{
+	/*
+	 * No support for implementation defined features, therefore, hyp has no
+	 * sanitized copy of the feature id register.
+	 */
+	BUILD_BUG_ON(PVM_ID_AA64AFR0_ALLOW != 0ULL);
+	return 0;
+}
+
+static u64 get_pvm_id_aa64afr1(const struct kvm_vcpu *vcpu)
+{
+	/*
+	 * No support for implementation defined features, therefore, hyp has no
+	 * sanitized copy of the feature id register.
+	 */
+	BUILD_BUG_ON(PVM_ID_AA64AFR1_ALLOW != 0ULL);
+	return 0;
+}
+
+static u64 get_pvm_id_aa64isar0(const struct kvm_vcpu *vcpu)
+{
+	return id_aa64isar0_el1_sys_val & PVM_ID_AA64ISAR0_ALLOW;
+}
+
+static u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu)
+{
+	u64 allow_mask = PVM_ID_AA64ISAR1_ALLOW;
+
+	if (!vcpu_has_ptrauth(vcpu))
+		allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
+				ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
+				ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
+				ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
+
+	return id_aa64isar1_el1_sys_val & allow_mask;
+}
+
+static u64 get_pvm_id_aa64isar2(const struct kvm_vcpu *vcpu)
+{
+	u64 allow_mask = PVM_ID_AA64ISAR2_ALLOW;
+
+	if (!vcpu_has_ptrauth(vcpu))
+		allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
+				ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
+
+	return id_aa64isar2_el1_sys_val & allow_mask;
+}
+
+static u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu)
+{
+	u64 set_mask;
+
+	set_mask = get_restricted_features_unsigned(id_aa64mmfr0_el1_sys_val,
+		PVM_ID_AA64MMFR0_RESTRICT_UNSIGNED);
+
+	return (id_aa64mmfr0_el1_sys_val & PVM_ID_AA64MMFR0_ALLOW) | set_mask;
+}
+
+static u64 get_pvm_id_aa64mmfr1(const struct kvm_vcpu *vcpu)
+{
+	return id_aa64mmfr1_el1_sys_val & PVM_ID_AA64MMFR1_ALLOW;
+}
+
+static u64 get_pvm_id_aa64mmfr2(const struct kvm_vcpu *vcpu)
+{
+	return id_aa64mmfr2_el1_sys_val & PVM_ID_AA64MMFR2_ALLOW;
+}
+
+/* Read a sanitized cpufeature ID register by its encoding */
+u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id)
+{
+	switch (id) {
+	case SYS_ID_AA64PFR0_EL1:
+		return get_pvm_id_aa64pfr0(vcpu);
+	case SYS_ID_AA64PFR1_EL1:
+		return get_pvm_id_aa64pfr1(vcpu);
+	case SYS_ID_AA64ZFR0_EL1:
+		return get_pvm_id_aa64zfr0(vcpu);
+	case SYS_ID_AA64DFR0_EL1:
+		return get_pvm_id_aa64dfr0(vcpu);
+	case SYS_ID_AA64DFR1_EL1:
+		return get_pvm_id_aa64dfr1(vcpu);
+	case SYS_ID_AA64AFR0_EL1:
+		return get_pvm_id_aa64afr0(vcpu);
+	case SYS_ID_AA64AFR1_EL1:
+		return get_pvm_id_aa64afr1(vcpu);
+	case SYS_ID_AA64ISAR0_EL1:
+		return get_pvm_id_aa64isar0(vcpu);
+	case SYS_ID_AA64ISAR1_EL1:
+		return get_pvm_id_aa64isar1(vcpu);
+	case SYS_ID_AA64ISAR2_EL1:
+		return get_pvm_id_aa64isar2(vcpu);
+	case SYS_ID_AA64MMFR0_EL1:
+		return get_pvm_id_aa64mmfr0(vcpu);
+	case SYS_ID_AA64MMFR1_EL1:
+		return get_pvm_id_aa64mmfr1(vcpu);
+	case SYS_ID_AA64MMFR2_EL1:
+		return get_pvm_id_aa64mmfr2(vcpu);
+	default:
+		/* Unhandled ID register, RAZ */
+		return 0;
+	}
+}
+
+static u64 read_id_reg(const struct kvm_vcpu *vcpu,
+		       struct sys_reg_desc const *r)
+{
+	return pvm_read_id_reg(vcpu, reg_to_encoding(r));
+}
+
+/* Handler to RAZ/WI sysregs */
+static bool pvm_access_raz_wi(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			      const struct sys_reg_desc *r)
+{
+	if (!p->is_write)
+		p->regval = 0;
+
+	return true;
+}
+
+/*
+ * Accessor for AArch32 feature id registers.
+ *
+ * The value of these registers is "unknown" according to the spec if AArch32
+ * isn't supported.
+ */
+static bool pvm_access_id_aarch32(struct kvm_vcpu *vcpu,
+				  struct sys_reg_params *p,
+				  const struct sys_reg_desc *r)
+{
+	if (p->is_write) {
+		inject_undef64(vcpu);
+		return false;
+	}
+
+	/*
+	 * No support for AArch32 guests, therefore, pKVM has no sanitized copy
+	 * of AArch32 feature id registers.
+	 */
+	BUILD_BUG_ON(FIELD_GET(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_EL1),
+		     PVM_ID_AA64PFR0_RESTRICT_UNSIGNED) > ID_AA64PFR0_EL1_ELx_64BIT_ONLY);
+
+	return pvm_access_raz_wi(vcpu, p, r);
+}
+
+/*
+ * Accessor for AArch64 feature id registers.
+ *
+ * If access is allowed, set the regval to the protected VM's view of the
+ * register and return true.
+ * Otherwise, inject an undefined exception and return false.
+ */
+static bool pvm_access_id_aarch64(struct kvm_vcpu *vcpu,
+				  struct sys_reg_params *p,
+				  const struct sys_reg_desc *r)
+{
+	if (p->is_write) {
+		inject_undef64(vcpu);
+		return false;
+	}
+
+	p->regval = read_id_reg(vcpu, r);
+	return true;
+}
+
+static bool pvm_gic_read_sre(struct kvm_vcpu *vcpu,
+			     struct sys_reg_params *p,
+			     const struct sys_reg_desc *r)
+{
+	/* pVMs only support GICv3. 'nuf said. */
+	if (!p->is_write)
+		p->regval = ICC_SRE_EL1_DIB | ICC_SRE_EL1_DFB | ICC_SRE_EL1_SRE;
+
+	return true;
+}
+
+/* Mark the specified system register as an AArch32 feature id register. */
+#define AARCH32(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch32 }
+
+/* Mark the specified system register as an AArch64 feature id register. */
+#define AARCH64(REG) { SYS_DESC(REG), .access = pvm_access_id_aarch64 }
+
+/*
+ * sys_reg_desc initialiser for architecturally unallocated cpufeature ID
+ * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
+ * (1 <= crm < 8, 0 <= Op2 < 8).
+ */
+#define ID_UNALLOCATED(crm, op2) {			\
+	Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2),	\
+	.access = pvm_access_id_aarch64,		\
+}
+
+/* Mark the specified system register as Read-As-Zero/Write-Ignored */
+#define RAZ_WI(REG) { SYS_DESC(REG), .access = pvm_access_raz_wi }
+
+/* Mark the specified system register as not being handled in hyp. */
+#define HOST_HANDLED(REG) { SYS_DESC(REG), .access = NULL }
+
+/*
+ * Architected system registers.
+ * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
+ *
+ * NOTE: Anything not explicitly listed here is *restricted by default*, i.e.,
+ * it will lead to injecting an exception into the guest.
+ */
+static const struct sys_reg_desc pvm_sys_reg_descs[] = {
+	/* Cache maintenance by set/way operations are restricted. */
+
+	/* Debug and Trace Registers are restricted. */
+
+	/* AArch64 mappings of the AArch32 ID registers */
+	/* CRm=1 */
+	AARCH32(SYS_ID_PFR0_EL1),
+	AARCH32(SYS_ID_PFR1_EL1),
+	AARCH32(SYS_ID_DFR0_EL1),
+	AARCH32(SYS_ID_AFR0_EL1),
+	AARCH32(SYS_ID_MMFR0_EL1),
+	AARCH32(SYS_ID_MMFR1_EL1),
+	AARCH32(SYS_ID_MMFR2_EL1),
+	AARCH32(SYS_ID_MMFR3_EL1),
+
+	/* CRm=2 */
+	AARCH32(SYS_ID_ISAR0_EL1),
+	AARCH32(SYS_ID_ISAR1_EL1),
+	AARCH32(SYS_ID_ISAR2_EL1),
+	AARCH32(SYS_ID_ISAR3_EL1),
+	AARCH32(SYS_ID_ISAR4_EL1),
+	AARCH32(SYS_ID_ISAR5_EL1),
+	AARCH32(SYS_ID_MMFR4_EL1),
+	AARCH32(SYS_ID_ISAR6_EL1),
+
+	/* CRm=3 */
+	AARCH32(SYS_MVFR0_EL1),
+	AARCH32(SYS_MVFR1_EL1),
+	AARCH32(SYS_MVFR2_EL1),
+	ID_UNALLOCATED(3,3),
+	AARCH32(SYS_ID_PFR2_EL1),
+	AARCH32(SYS_ID_DFR1_EL1),
+	AARCH32(SYS_ID_MMFR5_EL1),
+	ID_UNALLOCATED(3,7),
+
+	/* AArch64 ID registers */
+	/* CRm=4 */
+	AARCH64(SYS_ID_AA64PFR0_EL1),
+	AARCH64(SYS_ID_AA64PFR1_EL1),
+	ID_UNALLOCATED(4,2),
+	ID_UNALLOCATED(4,3),
+	AARCH64(SYS_ID_AA64ZFR0_EL1),
+	ID_UNALLOCATED(4,5),
+	ID_UNALLOCATED(4,6),
+	ID_UNALLOCATED(4,7),
+	AARCH64(SYS_ID_AA64DFR0_EL1),
+	AARCH64(SYS_ID_AA64DFR1_EL1),
+	ID_UNALLOCATED(5,2),
+	ID_UNALLOCATED(5,3),
+	AARCH64(SYS_ID_AA64AFR0_EL1),
+	AARCH64(SYS_ID_AA64AFR1_EL1),
+	ID_UNALLOCATED(5,6),
+	ID_UNALLOCATED(5,7),
+	AARCH64(SYS_ID_AA64ISAR0_EL1),
+	AARCH64(SYS_ID_AA64ISAR1_EL1),
+	AARCH64(SYS_ID_AA64ISAR2_EL1),
+	ID_UNALLOCATED(6,3),
+	ID_UNALLOCATED(6,4),
+	ID_UNALLOCATED(6,5),
+	ID_UNALLOCATED(6,6),
+	ID_UNALLOCATED(6,7),
+	AARCH64(SYS_ID_AA64MMFR0_EL1),
+	AARCH64(SYS_ID_AA64MMFR1_EL1),
+	AARCH64(SYS_ID_AA64MMFR2_EL1),
+	ID_UNALLOCATED(7,3),
+	ID_UNALLOCATED(7,4),
+	ID_UNALLOCATED(7,5),
+	ID_UNALLOCATED(7,6),
+	ID_UNALLOCATED(7,7),
+
+	/* Scalable Vector Registers are restricted. */
+
+	RAZ_WI(SYS_ERRIDR_EL1),
+	RAZ_WI(SYS_ERRSELR_EL1),
+	RAZ_WI(SYS_ERXFR_EL1),
+	RAZ_WI(SYS_ERXCTLR_EL1),
+	RAZ_WI(SYS_ERXSTATUS_EL1),
+	RAZ_WI(SYS_ERXADDR_EL1),
+	RAZ_WI(SYS_ERXMISC0_EL1),
+	RAZ_WI(SYS_ERXMISC1_EL1),
+
+	/* Performance Monitoring Registers are restricted. */
+
+	/* Limited Ordering Regions Registers are restricted. */
+
+	HOST_HANDLED(SYS_ICC_SGI1R_EL1),
+	HOST_HANDLED(SYS_ICC_ASGI1R_EL1),
+	HOST_HANDLED(SYS_ICC_SGI0R_EL1),
+	{ SYS_DESC(SYS_ICC_SRE_EL1), .access = pvm_gic_read_sre, },
+
+	HOST_HANDLED(SYS_CCSIDR_EL1),
+	HOST_HANDLED(SYS_CLIDR_EL1),
+	HOST_HANDLED(SYS_CSSELR_EL1),
+	HOST_HANDLED(SYS_CTR_EL0),
+
+	/* Performance Monitoring Registers are restricted. */
+
+	/* Activity Monitoring Registers are restricted. */
+
+	HOST_HANDLED(SYS_CNTP_TVAL_EL0),
+	HOST_HANDLED(SYS_CNTP_CTL_EL0),
+	HOST_HANDLED(SYS_CNTP_CVAL_EL0),
+
+	/* Performance Monitoring Registers are restricted. */
+};
+
+/*
+ * Checks that the sysreg table is unique and in-order.
+ *
+ * Returns 0 if the table is consistent, or 1 otherwise.
+ */
+int kvm_check_pvm_sysreg_table(void)
+{
+	unsigned int i;
+
+	for (i = 1; i < ARRAY_SIZE(pvm_sys_reg_descs); i++) {
+		if (cmp_sys_reg(&pvm_sys_reg_descs[i-1], &pvm_sys_reg_descs[i]) >= 0)
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Handler for protected VM MSR, MRS or System instruction execution.
+ *
+ * Returns true if the hypervisor has handled the exit, and control should go
+ * back to the guest, or false if it hasn't, to be handled by the host.
+ */
+bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	const struct sys_reg_desc *r;
+	struct sys_reg_params params;
+	unsigned long esr = kvm_vcpu_get_esr(vcpu);
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
+
+	params = esr_sys64_to_params(esr);
+	params.regval = vcpu_get_reg(vcpu, Rt);
+
+	r = find_reg(&params, pvm_sys_reg_descs, ARRAY_SIZE(pvm_sys_reg_descs));
+
+	/* Undefined (RESTRICTED). */
+	if (r == NULL) {
+		inject_undef64(vcpu);
+		return true;
+	}
+
+	/* Handled by the host (HOST_HANDLED) */
+	if (r->access == NULL)
+		return false;
+
+	/* Handled by hyp: skip instruction if instructed to do so. */
+	if (r->access(vcpu, &params, r))
+		__kvm_skip_instr(vcpu);
+
+	if (!params.is_write)
+		vcpu_set_reg(vcpu, Rt, params.regval);
+
+	return true;
+}
+
+/*
+ * Handler for protected VM restricted exceptions.
+ *
+ * Inject an undefined exception into the guest and return true to indicate that
+ * the hypervisor has handled the exit, and control should go back to the guest.
+ */
+bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	inject_undef64(vcpu);
+	return true;
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c b/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c
new file mode 100644
index 000000000..29305022b
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/sysreg-sr.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/sysreg-sr.h>
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kprobes.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+
+/*
+ * Non-VHE: Both host and guest must save everything.
+ */
+
+void __sysreg_save_state_nvhe(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_save_el1_state(ctxt);
+	__sysreg_save_common_state(ctxt);
+	__sysreg_save_user_state(ctxt);
+	__sysreg_save_el2_return_state(ctxt);
+}
+
+void __sysreg_restore_state_nvhe(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_restore_el1_state(ctxt);
+	__sysreg_restore_common_state(ctxt);
+	__sysreg_restore_user_state(ctxt);
+	__sysreg_restore_el2_return_state(ctxt);
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/timer-sr.c b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
new file mode 100644
index 000000000..3aaab20ae
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/timer-sr.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <clocksource/arm_arch_timer.h>
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+void __kvm_timer_set_cntvoff(u64 cntvoff)
+{
+	write_sysreg(cntvoff, cntvoff_el2);
+}
+
+/*
+ * Should only be called on non-VHE or hVHE setups.
+ * VHE systems use EL2 timers and configure EL1 timers in kvm_timer_init_vhe().
+ */
+void __timer_disable_traps(struct kvm_vcpu *vcpu)
+{
+	u64 val, shift = 0;
+
+	if (has_hvhe())
+		shift = 10;
+
+	/* Allow physical timer/counter access for the host */
+	val = read_sysreg(cnthctl_el2);
+	val |= (CNTHCTL_EL1PCTEN | CNTHCTL_EL1PCEN) << shift;
+	write_sysreg(val, cnthctl_el2);
+}
+
+/*
+ * Should only be called on non-VHE or hVHE setups.
+ * VHE systems use EL2 timers and configure EL1 timers in kvm_timer_init_vhe().
+ */
+void __timer_enable_traps(struct kvm_vcpu *vcpu)
+{
+	u64 clr = 0, set = 0;
+
+	/*
+	 * Disallow physical timer access for the guest
+	 * Physical counter access is allowed if no offset is enforced
+	 * or running protected (we don't offset anything in this case).
+	 */
+	clr = CNTHCTL_EL1PCEN;
+	if (is_protected_kvm_enabled() ||
+	    !kern_hyp_va(vcpu->kvm)->arch.timer_data.poffset)
+		set |= CNTHCTL_EL1PCTEN;
+	else
+		clr |= CNTHCTL_EL1PCTEN;
+
+	if (has_hvhe()) {
+		clr <<= 10;
+		set <<= 10;
+	}
+
+	sysreg_clear_set(cnthctl_el2, clr, set);
+}
diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c
new file mode 100644
index 000000000..1b265713d
--- /dev/null
+++ b/arch/arm64/kvm/hyp/nvhe/tlb.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/tlbflush.h>
+
+#include <nvhe/mem_protect.h>
+
+struct tlb_inv_context {
+	u64		tcr;
+};
+
+static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
+				  struct tlb_inv_context *cxt,
+				  bool nsh)
+{
+	/*
+	 * We have two requirements:
+	 *
+	 * - ensure that the page table updates are visible to all
+	 *   CPUs, for which a dsb(DOMAIN-st) is what we need, DOMAIN
+	 *   being either ish or nsh, depending on the invalidation
+	 *   type.
+	 *
+	 * - complete any speculative page table walk started before
+	 *   we trapped to EL2 so that we can mess with the MM
+	 *   registers out of context, for which dsb(nsh) is enough
+	 *
+	 * The composition of these two barriers is a dsb(DOMAIN), and
+	 * the 'nsh' parameter tracks the distinction between
+	 * Inner-Shareable and Non-Shareable, as specified by the
+	 * callers.
+	 */
+	if (nsh)
+		dsb(nsh);
+	else
+		dsb(ish);
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		u64 val;
+
+		/*
+		 * For CPUs that are affected by ARM 1319367, we need to
+		 * avoid a host Stage-1 walk while we have the guest's
+		 * VMID set in the VTTBR in order to invalidate TLBs.
+		 * We're guaranteed that the S1 MMU is enabled, so we can
+		 * simply set the EPD bits to avoid any further TLB fill.
+		 */
+		val = cxt->tcr = read_sysreg_el1(SYS_TCR);
+		val |= TCR_EPD1_MASK | TCR_EPD0_MASK;
+		write_sysreg_el1(val, SYS_TCR);
+		isb();
+	}
+
+	/*
+	 * __load_stage2() includes an ISB only when the AT
+	 * workaround is applied. Take care of the opposite condition,
+	 * ensuring that we always have an ISB, but not two ISBs back
+	 * to back.
+	 */
+	__load_stage2(mmu, kern_hyp_va(mmu->arch));
+	asm(ALTERNATIVE("isb", "nop", ARM64_WORKAROUND_SPECULATIVE_AT));
+}
+
+static void __tlb_switch_to_host(struct tlb_inv_context *cxt)
+{
+	__load_host_stage2();
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		/* Ensure write of the host VMID */
+		isb();
+		/* Restore the host's TCR_EL1 */
+		write_sysreg_el1(cxt->tcr, SYS_TCR);
+	}
+}
+
+void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
+			      phys_addr_t ipa, int level)
+{
+	struct tlb_inv_context cxt;
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt, false);
+
+	/*
+	 * We could do so much better if we had the VA as well.
+	 * Instead, we invalidate Stage-2 for this IPA, and the
+	 * whole of Stage-1. Weep...
+	 */
+	ipa >>= 12;
+	__tlbi_level(ipas2e1is, ipa, level);
+
+	/*
+	 * We have to ensure completion of the invalidation at Stage-2,
+	 * since a table walk on another CPU could refill a TLB with a
+	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
+	 * the Stage-1 invalidation happened first.
+	 */
+	dsb(ish);
+	__tlbi(vmalle1is);
+	dsb(ish);
+	isb();
+
+	/*
+	 * If the host is running at EL1 and we have a VPIPT I-cache,
+	 * then we must perform I-cache maintenance at EL2 in order for
+	 * it to have an effect on the guest. Since the guest cannot hit
+	 * I-cache lines allocated with a different VMID, we don't need
+	 * to worry about junk out of guest reset (we nuke the I-cache on
+	 * VMID rollover), but we do need to be careful when remapping
+	 * executable pages for the same guest. This can happen when KSM
+	 * takes a CoW fault on an executable page, copies the page into
+	 * a page that was previously mapped in the guest and then needs
+	 * to invalidate the guest view of the I-cache for that page
+	 * from EL1. To solve this, we invalidate the entire I-cache when
+	 * unmapping a page from a guest if we have a VPIPT I-cache but
+	 * the host is running at EL1. As above, we could do better if
+	 * we had the VA.
+	 *
+	 * The moral of this story is: if you have a VPIPT I-cache, then
+	 * you should be running with VHE enabled.
+	 */
+	if (icache_is_vpipt())
+		icache_inval_all_pou();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu,
+				  phys_addr_t ipa, int level)
+{
+	struct tlb_inv_context cxt;
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt, true);
+
+	/*
+	 * We could do so much better if we had the VA as well.
+	 * Instead, we invalidate Stage-2 for this IPA, and the
+	 * whole of Stage-1. Weep...
+	 */
+	ipa >>= 12;
+	__tlbi_level(ipas2e1, ipa, level);
+
+	/*
+	 * We have to ensure completion of the invalidation at Stage-2,
+	 * since a table walk on another CPU could refill a TLB with a
+	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
+	 * the Stage-1 invalidation happened first.
+	 */
+	dsb(nsh);
+	__tlbi(vmalle1);
+	dsb(nsh);
+	isb();
+
+	/*
+	 * If the host is running at EL1 and we have a VPIPT I-cache,
+	 * then we must perform I-cache maintenance at EL2 in order for
+	 * it to have an effect on the guest. Since the guest cannot hit
+	 * I-cache lines allocated with a different VMID, we don't need
+	 * to worry about junk out of guest reset (we nuke the I-cache on
+	 * VMID rollover), but we do need to be careful when remapping
+	 * executable pages for the same guest. This can happen when KSM
+	 * takes a CoW fault on an executable page, copies the page into
+	 * a page that was previously mapped in the guest and then needs
+	 * to invalidate the guest view of the I-cache for that page
+	 * from EL1. To solve this, we invalidate the entire I-cache when
+	 * unmapping a page from a guest if we have a VPIPT I-cache but
+	 * the host is running at EL1. As above, we could do better if
+	 * we had the VA.
+	 *
+	 * The moral of this story is: if you have a VPIPT I-cache, then
+	 * you should be running with VHE enabled.
+	 */
+	if (icache_is_vpipt())
+		icache_inval_all_pou();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
+				phys_addr_t start, unsigned long pages)
+{
+	struct tlb_inv_context cxt;
+	unsigned long stride;
+
+	/*
+	 * Since the range of addresses may not be mapped at
+	 * the same level, assume the worst case as PAGE_SIZE
+	 */
+	stride = PAGE_SIZE;
+	start = round_down(start, stride);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt, false);
+
+	__flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, 0);
+
+	dsb(ish);
+	__tlbi(vmalle1is);
+	dsb(ish);
+	isb();
+
+	/* See the comment in __kvm_tlb_flush_vmid_ipa() */
+	if (icache_is_vpipt())
+		icache_inval_all_pou();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu)
+{
+	struct tlb_inv_context cxt;
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt, false);
+
+	__tlbi(vmalls12e1is);
+	dsb(ish);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu)
+{
+	struct tlb_inv_context cxt;
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt, false);
+
+	__tlbi(vmalle1);
+	asm volatile("ic iallu");
+	dsb(nsh);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_flush_vm_context(void)
+{
+	/* Same remark as in __tlb_switch_to_guest() */
+	dsb(ish);
+	__tlbi(alle1is);
+
+	/*
+	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
+	 * is necessary across a VMID rollover.
+	 *
+	 * VPIPT caches constrain lookup and maintenance to the active VMID,
+	 * so we need to invalidate lines with a stale VMID to avoid an ABA
+	 * race after multiple rollovers.
+	 *
+	 */
+	if (icache_is_vpipt())
+		asm volatile("ic ialluis");
+
+	dsb(ish);
+}
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
new file mode 100644
index 000000000..f155b8c9e
--- /dev/null
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -0,0 +1,1600 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Stand-alone page-table allocator for hyp stage-1 and guest stage-2.
+ * No bombay mix was harmed in the writing of this file.
+ *
+ * Copyright (C) 2020 Google LLC
+ * Author: Will Deacon <will@kernel.org>
+ */
+
+#include <linux/bitfield.h>
+#include <asm/kvm_pgtable.h>
+#include <asm/stage2_pgtable.h>
+
+
+#define KVM_PTE_TYPE			BIT(1)
+#define KVM_PTE_TYPE_BLOCK		0
+#define KVM_PTE_TYPE_PAGE		1
+#define KVM_PTE_TYPE_TABLE		1
+
+#define KVM_PTE_LEAF_ATTR_LO		GENMASK(11, 2)
+
+#define KVM_PTE_LEAF_ATTR_LO_S1_ATTRIDX	GENMASK(4, 2)
+#define KVM_PTE_LEAF_ATTR_LO_S1_AP	GENMASK(7, 6)
+#define KVM_PTE_LEAF_ATTR_LO_S1_AP_RO		\
+	({ cpus_have_final_cap(ARM64_KVM_HVHE) ? 2 : 3; })
+#define KVM_PTE_LEAF_ATTR_LO_S1_AP_RW		\
+	({ cpus_have_final_cap(ARM64_KVM_HVHE) ? 0 : 1; })
+#define KVM_PTE_LEAF_ATTR_LO_S1_SH	GENMASK(9, 8)
+#define KVM_PTE_LEAF_ATTR_LO_S1_SH_IS	3
+#define KVM_PTE_LEAF_ATTR_LO_S1_AF	BIT(10)
+
+#define KVM_PTE_LEAF_ATTR_LO_S2_MEMATTR	GENMASK(5, 2)
+#define KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R	BIT(6)
+#define KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W	BIT(7)
+#define KVM_PTE_LEAF_ATTR_LO_S2_SH	GENMASK(9, 8)
+#define KVM_PTE_LEAF_ATTR_LO_S2_SH_IS	3
+#define KVM_PTE_LEAF_ATTR_LO_S2_AF	BIT(10)
+
+#define KVM_PTE_LEAF_ATTR_HI		GENMASK(63, 50)
+
+#define KVM_PTE_LEAF_ATTR_HI_SW		GENMASK(58, 55)
+
+#define KVM_PTE_LEAF_ATTR_HI_S1_XN	BIT(54)
+
+#define KVM_PTE_LEAF_ATTR_HI_S2_XN	BIT(54)
+
+#define KVM_PTE_LEAF_ATTR_HI_S1_GP	BIT(50)
+
+#define KVM_PTE_LEAF_ATTR_S2_PERMS	(KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R | \
+					 KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W | \
+					 KVM_PTE_LEAF_ATTR_HI_S2_XN)
+
+#define KVM_INVALID_PTE_OWNER_MASK	GENMASK(9, 2)
+#define KVM_MAX_OWNER_ID		1
+
+/*
+ * Used to indicate a pte for which a 'break-before-make' sequence is in
+ * progress.
+ */
+#define KVM_INVALID_PTE_LOCKED		BIT(10)
+
+struct kvm_pgtable_walk_data {
+	struct kvm_pgtable_walker	*walker;
+
+	const u64			start;
+	u64				addr;
+	const u64			end;
+};
+
+static bool kvm_pgtable_walk_skip_bbm_tlbi(const struct kvm_pgtable_visit_ctx *ctx)
+{
+	return unlikely(ctx->flags & KVM_PGTABLE_WALK_SKIP_BBM_TLBI);
+}
+
+static bool kvm_pgtable_walk_skip_cmo(const struct kvm_pgtable_visit_ctx *ctx)
+{
+	return unlikely(ctx->flags & KVM_PGTABLE_WALK_SKIP_CMO);
+}
+
+static bool kvm_phys_is_valid(u64 phys)
+{
+	return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_EL1_PARANGE_MAX));
+}
+
+static bool kvm_block_mapping_supported(const struct kvm_pgtable_visit_ctx *ctx, u64 phys)
+{
+	u64 granule = kvm_granule_size(ctx->level);
+
+	if (!kvm_level_supports_block_mapping(ctx->level))
+		return false;
+
+	if (granule > (ctx->end - ctx->addr))
+		return false;
+
+	if (kvm_phys_is_valid(phys) && !IS_ALIGNED(phys, granule))
+		return false;
+
+	return IS_ALIGNED(ctx->addr, granule);
+}
+
+static u32 kvm_pgtable_idx(struct kvm_pgtable_walk_data *data, u32 level)
+{
+	u64 shift = kvm_granule_shift(level);
+	u64 mask = BIT(PAGE_SHIFT - 3) - 1;
+
+	return (data->addr >> shift) & mask;
+}
+
+static u32 kvm_pgd_page_idx(struct kvm_pgtable *pgt, u64 addr)
+{
+	u64 shift = kvm_granule_shift(pgt->start_level - 1); /* May underflow */
+	u64 mask = BIT(pgt->ia_bits) - 1;
+
+	return (addr & mask) >> shift;
+}
+
+static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
+{
+	struct kvm_pgtable pgt = {
+		.ia_bits	= ia_bits,
+		.start_level	= start_level,
+	};
+
+	return kvm_pgd_page_idx(&pgt, -1ULL) + 1;
+}
+
+static bool kvm_pte_table(kvm_pte_t pte, u32 level)
+{
+	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+		return false;
+
+	if (!kvm_pte_valid(pte))
+		return false;
+
+	return FIELD_GET(KVM_PTE_TYPE, pte) == KVM_PTE_TYPE_TABLE;
+}
+
+static kvm_pte_t *kvm_pte_follow(kvm_pte_t pte, struct kvm_pgtable_mm_ops *mm_ops)
+{
+	return mm_ops->phys_to_virt(kvm_pte_to_phys(pte));
+}
+
+static void kvm_clear_pte(kvm_pte_t *ptep)
+{
+	WRITE_ONCE(*ptep, 0);
+}
+
+static kvm_pte_t kvm_init_table_pte(kvm_pte_t *childp, struct kvm_pgtable_mm_ops *mm_ops)
+{
+	kvm_pte_t pte = kvm_phys_to_pte(mm_ops->virt_to_phys(childp));
+
+	pte |= FIELD_PREP(KVM_PTE_TYPE, KVM_PTE_TYPE_TABLE);
+	pte |= KVM_PTE_VALID;
+	return pte;
+}
+
+static kvm_pte_t kvm_init_valid_leaf_pte(u64 pa, kvm_pte_t attr, u32 level)
+{
+	kvm_pte_t pte = kvm_phys_to_pte(pa);
+	u64 type = (level == KVM_PGTABLE_MAX_LEVELS - 1) ? KVM_PTE_TYPE_PAGE :
+							   KVM_PTE_TYPE_BLOCK;
+
+	pte |= attr & (KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI);
+	pte |= FIELD_PREP(KVM_PTE_TYPE, type);
+	pte |= KVM_PTE_VALID;
+
+	return pte;
+}
+
+static kvm_pte_t kvm_init_invalid_leaf_owner(u8 owner_id)
+{
+	return FIELD_PREP(KVM_INVALID_PTE_OWNER_MASK, owner_id);
+}
+
+static int kvm_pgtable_visitor_cb(struct kvm_pgtable_walk_data *data,
+				  const struct kvm_pgtable_visit_ctx *ctx,
+				  enum kvm_pgtable_walk_flags visit)
+{
+	struct kvm_pgtable_walker *walker = data->walker;
+
+	/* Ensure the appropriate lock is held (e.g. RCU lock for stage-2 MMU) */
+	WARN_ON_ONCE(kvm_pgtable_walk_shared(ctx) && !kvm_pgtable_walk_lock_held());
+	return walker->cb(ctx, visit);
+}
+
+static bool kvm_pgtable_walk_continue(const struct kvm_pgtable_walker *walker,
+				      int r)
+{
+	/*
+	 * Visitor callbacks return EAGAIN when the conditions that led to a
+	 * fault are no longer reflected in the page tables due to a race to
+	 * update a PTE. In the context of a fault handler this is interpreted
+	 * as a signal to retry guest execution.
+	 *
+	 * Ignore the return code altogether for walkers outside a fault handler
+	 * (e.g. write protecting a range of memory) and chug along with the
+	 * page table walk.
+	 */
+	if (r == -EAGAIN)
+		return !(walker->flags & KVM_PGTABLE_WALK_HANDLE_FAULT);
+
+	return !r;
+}
+
+static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level);
+
+static inline int __kvm_pgtable_visit(struct kvm_pgtable_walk_data *data,
+				      struct kvm_pgtable_mm_ops *mm_ops,
+				      kvm_pteref_t pteref, u32 level)
+{
+	enum kvm_pgtable_walk_flags flags = data->walker->flags;
+	kvm_pte_t *ptep = kvm_dereference_pteref(data->walker, pteref);
+	struct kvm_pgtable_visit_ctx ctx = {
+		.ptep	= ptep,
+		.old	= READ_ONCE(*ptep),
+		.arg	= data->walker->arg,
+		.mm_ops	= mm_ops,
+		.start	= data->start,
+		.addr	= data->addr,
+		.end	= data->end,
+		.level	= level,
+		.flags	= flags,
+	};
+	int ret = 0;
+	bool reload = false;
+	kvm_pteref_t childp;
+	bool table = kvm_pte_table(ctx.old, level);
+
+	if (table && (ctx.flags & KVM_PGTABLE_WALK_TABLE_PRE)) {
+		ret = kvm_pgtable_visitor_cb(data, &ctx, KVM_PGTABLE_WALK_TABLE_PRE);
+		reload = true;
+	}
+
+	if (!table && (ctx.flags & KVM_PGTABLE_WALK_LEAF)) {
+		ret = kvm_pgtable_visitor_cb(data, &ctx, KVM_PGTABLE_WALK_LEAF);
+		reload = true;
+	}
+
+	/*
+	 * Reload the page table after invoking the walker callback for leaf
+	 * entries or after pre-order traversal, to allow the walker to descend
+	 * into a newly installed or replaced table.
+	 */
+	if (reload) {
+		ctx.old = READ_ONCE(*ptep);
+		table = kvm_pte_table(ctx.old, level);
+	}
+
+	if (!kvm_pgtable_walk_continue(data->walker, ret))
+		goto out;
+
+	if (!table) {
+		data->addr = ALIGN_DOWN(data->addr, kvm_granule_size(level));
+		data->addr += kvm_granule_size(level);
+		goto out;
+	}
+
+	childp = (kvm_pteref_t)kvm_pte_follow(ctx.old, mm_ops);
+	ret = __kvm_pgtable_walk(data, mm_ops, childp, level + 1);
+	if (!kvm_pgtable_walk_continue(data->walker, ret))
+		goto out;
+
+	if (ctx.flags & KVM_PGTABLE_WALK_TABLE_POST)
+		ret = kvm_pgtable_visitor_cb(data, &ctx, KVM_PGTABLE_WALK_TABLE_POST);
+
+out:
+	if (kvm_pgtable_walk_continue(data->walker, ret))
+		return 0;
+
+	return ret;
+}
+
+static int __kvm_pgtable_walk(struct kvm_pgtable_walk_data *data,
+			      struct kvm_pgtable_mm_ops *mm_ops, kvm_pteref_t pgtable, u32 level)
+{
+	u32 idx;
+	int ret = 0;
+
+	if (WARN_ON_ONCE(level >= KVM_PGTABLE_MAX_LEVELS))
+		return -EINVAL;
+
+	for (idx = kvm_pgtable_idx(data, level); idx < PTRS_PER_PTE; ++idx) {
+		kvm_pteref_t pteref = &pgtable[idx];
+
+		if (data->addr >= data->end)
+			break;
+
+		ret = __kvm_pgtable_visit(data, mm_ops, pteref, level);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int _kvm_pgtable_walk(struct kvm_pgtable *pgt, struct kvm_pgtable_walk_data *data)
+{
+	u32 idx;
+	int ret = 0;
+	u64 limit = BIT(pgt->ia_bits);
+
+	if (data->addr > limit || data->end > limit)
+		return -ERANGE;
+
+	if (!pgt->pgd)
+		return -EINVAL;
+
+	for (idx = kvm_pgd_page_idx(pgt, data->addr); data->addr < data->end; ++idx) {
+		kvm_pteref_t pteref = &pgt->pgd[idx * PTRS_PER_PTE];
+
+		ret = __kvm_pgtable_walk(data, pgt->mm_ops, pteref, pgt->start_level);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
+		     struct kvm_pgtable_walker *walker)
+{
+	struct kvm_pgtable_walk_data walk_data = {
+		.start	= ALIGN_DOWN(addr, PAGE_SIZE),
+		.addr	= ALIGN_DOWN(addr, PAGE_SIZE),
+		.end	= PAGE_ALIGN(walk_data.addr + size),
+		.walker	= walker,
+	};
+	int r;
+
+	r = kvm_pgtable_walk_begin(walker);
+	if (r)
+		return r;
+
+	r = _kvm_pgtable_walk(pgt, &walk_data);
+	kvm_pgtable_walk_end(walker);
+
+	return r;
+}
+
+struct leaf_walk_data {
+	kvm_pte_t	pte;
+	u32		level;
+};
+
+static int leaf_walker(const struct kvm_pgtable_visit_ctx *ctx,
+		       enum kvm_pgtable_walk_flags visit)
+{
+	struct leaf_walk_data *data = ctx->arg;
+
+	data->pte   = ctx->old;
+	data->level = ctx->level;
+
+	return 0;
+}
+
+int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
+			 kvm_pte_t *ptep, u32 *level)
+{
+	struct leaf_walk_data data;
+	struct kvm_pgtable_walker walker = {
+		.cb	= leaf_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= &data,
+	};
+	int ret;
+
+	ret = kvm_pgtable_walk(pgt, ALIGN_DOWN(addr, PAGE_SIZE),
+			       PAGE_SIZE, &walker);
+	if (!ret) {
+		if (ptep)
+			*ptep  = data.pte;
+		if (level)
+			*level = data.level;
+	}
+
+	return ret;
+}
+
+struct hyp_map_data {
+	const u64			phys;
+	kvm_pte_t			attr;
+};
+
+static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep)
+{
+	bool device = prot & KVM_PGTABLE_PROT_DEVICE;
+	u32 mtype = device ? MT_DEVICE_nGnRE : MT_NORMAL;
+	kvm_pte_t attr = FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_ATTRIDX, mtype);
+	u32 sh = KVM_PTE_LEAF_ATTR_LO_S1_SH_IS;
+	u32 ap = (prot & KVM_PGTABLE_PROT_W) ? KVM_PTE_LEAF_ATTR_LO_S1_AP_RW :
+					       KVM_PTE_LEAF_ATTR_LO_S1_AP_RO;
+
+	if (!(prot & KVM_PGTABLE_PROT_R))
+		return -EINVAL;
+
+	if (prot & KVM_PGTABLE_PROT_X) {
+		if (prot & KVM_PGTABLE_PROT_W)
+			return -EINVAL;
+
+		if (device)
+			return -EINVAL;
+
+		if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti())
+			attr |= KVM_PTE_LEAF_ATTR_HI_S1_GP;
+	} else {
+		attr |= KVM_PTE_LEAF_ATTR_HI_S1_XN;
+	}
+
+	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap);
+	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
+	attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF;
+	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
+	*ptep = attr;
+
+	return 0;
+}
+
+enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte)
+{
+	enum kvm_pgtable_prot prot = pte & KVM_PTE_LEAF_ATTR_HI_SW;
+	u32 ap;
+
+	if (!kvm_pte_valid(pte))
+		return prot;
+
+	if (!(pte & KVM_PTE_LEAF_ATTR_HI_S1_XN))
+		prot |= KVM_PGTABLE_PROT_X;
+
+	ap = FIELD_GET(KVM_PTE_LEAF_ATTR_LO_S1_AP, pte);
+	if (ap == KVM_PTE_LEAF_ATTR_LO_S1_AP_RO)
+		prot |= KVM_PGTABLE_PROT_R;
+	else if (ap == KVM_PTE_LEAF_ATTR_LO_S1_AP_RW)
+		prot |= KVM_PGTABLE_PROT_RW;
+
+	return prot;
+}
+
+static bool hyp_map_walker_try_leaf(const struct kvm_pgtable_visit_ctx *ctx,
+				    struct hyp_map_data *data)
+{
+	u64 phys = data->phys + (ctx->addr - ctx->start);
+	kvm_pte_t new;
+
+	if (!kvm_block_mapping_supported(ctx, phys))
+		return false;
+
+	new = kvm_init_valid_leaf_pte(phys, data->attr, ctx->level);
+	if (ctx->old == new)
+		return true;
+	if (!kvm_pte_valid(ctx->old))
+		ctx->mm_ops->get_page(ctx->ptep);
+	else if (WARN_ON((ctx->old ^ new) & ~KVM_PTE_LEAF_ATTR_HI_SW))
+		return false;
+
+	smp_store_release(ctx->ptep, new);
+	return true;
+}
+
+static int hyp_map_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			  enum kvm_pgtable_walk_flags visit)
+{
+	kvm_pte_t *childp, new;
+	struct hyp_map_data *data = ctx->arg;
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (hyp_map_walker_try_leaf(ctx, data))
+		return 0;
+
+	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+		return -EINVAL;
+
+	childp = (kvm_pte_t *)mm_ops->zalloc_page(NULL);
+	if (!childp)
+		return -ENOMEM;
+
+	new = kvm_init_table_pte(childp, mm_ops);
+	mm_ops->get_page(ctx->ptep);
+	smp_store_release(ctx->ptep, new);
+
+	return 0;
+}
+
+int kvm_pgtable_hyp_map(struct kvm_pgtable *pgt, u64 addr, u64 size, u64 phys,
+			enum kvm_pgtable_prot prot)
+{
+	int ret;
+	struct hyp_map_data map_data = {
+		.phys	= ALIGN_DOWN(phys, PAGE_SIZE),
+	};
+	struct kvm_pgtable_walker walker = {
+		.cb	= hyp_map_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= &map_data,
+	};
+
+	ret = hyp_set_prot_attr(prot, &map_data.attr);
+	if (ret)
+		return ret;
+
+	ret = kvm_pgtable_walk(pgt, addr, size, &walker);
+	dsb(ishst);
+	isb();
+	return ret;
+}
+
+static int hyp_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			    enum kvm_pgtable_walk_flags visit)
+{
+	kvm_pte_t *childp = NULL;
+	u64 granule = kvm_granule_size(ctx->level);
+	u64 *unmapped = ctx->arg;
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (!kvm_pte_valid(ctx->old))
+		return -EINVAL;
+
+	if (kvm_pte_table(ctx->old, ctx->level)) {
+		childp = kvm_pte_follow(ctx->old, mm_ops);
+
+		if (mm_ops->page_count(childp) != 1)
+			return 0;
+
+		kvm_clear_pte(ctx->ptep);
+		dsb(ishst);
+		__tlbi_level(vae2is, __TLBI_VADDR(ctx->addr, 0), ctx->level);
+	} else {
+		if (ctx->end - ctx->addr < granule)
+			return -EINVAL;
+
+		kvm_clear_pte(ctx->ptep);
+		dsb(ishst);
+		__tlbi_level(vale2is, __TLBI_VADDR(ctx->addr, 0), ctx->level);
+		*unmapped += granule;
+	}
+
+	dsb(ish);
+	isb();
+	mm_ops->put_page(ctx->ptep);
+
+	if (childp)
+		mm_ops->put_page(childp);
+
+	return 0;
+}
+
+u64 kvm_pgtable_hyp_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	u64 unmapped = 0;
+	struct kvm_pgtable_walker walker = {
+		.cb	= hyp_unmap_walker,
+		.arg	= &unmapped,
+		.flags	= KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
+	};
+
+	if (!pgt->mm_ops->page_count)
+		return 0;
+
+	kvm_pgtable_walk(pgt, addr, size, &walker);
+	return unmapped;
+}
+
+int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits,
+			 struct kvm_pgtable_mm_ops *mm_ops)
+{
+	u64 levels = ARM64_HW_PGTABLE_LEVELS(va_bits);
+
+	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_page(NULL);
+	if (!pgt->pgd)
+		return -ENOMEM;
+
+	pgt->ia_bits		= va_bits;
+	pgt->start_level	= KVM_PGTABLE_MAX_LEVELS - levels;
+	pgt->mm_ops		= mm_ops;
+	pgt->mmu		= NULL;
+	pgt->force_pte_cb	= NULL;
+
+	return 0;
+}
+
+static int hyp_free_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			   enum kvm_pgtable_walk_flags visit)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (!kvm_pte_valid(ctx->old))
+		return 0;
+
+	mm_ops->put_page(ctx->ptep);
+
+	if (kvm_pte_table(ctx->old, ctx->level))
+		mm_ops->put_page(kvm_pte_follow(ctx->old, mm_ops));
+
+	return 0;
+}
+
+void kvm_pgtable_hyp_destroy(struct kvm_pgtable *pgt)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= hyp_free_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
+	};
+
+	WARN_ON(kvm_pgtable_walk(pgt, 0, BIT(pgt->ia_bits), &walker));
+	pgt->mm_ops->put_page(kvm_dereference_pteref(&walker, pgt->pgd));
+	pgt->pgd = NULL;
+}
+
+struct stage2_map_data {
+	const u64			phys;
+	kvm_pte_t			attr;
+	u8				owner_id;
+
+	kvm_pte_t			*anchor;
+	kvm_pte_t			*childp;
+
+	struct kvm_s2_mmu		*mmu;
+	void				*memcache;
+
+	/* Force mappings to page granularity */
+	bool				force_pte;
+};
+
+u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
+{
+	u64 vtcr = VTCR_EL2_FLAGS;
+	u8 lvls;
+
+	vtcr |= kvm_get_parange(mmfr0) << VTCR_EL2_PS_SHIFT;
+	vtcr |= VTCR_EL2_T0SZ(phys_shift);
+	/*
+	 * Use a minimum 2 level page table to prevent splitting
+	 * host PMD huge pages at stage2.
+	 */
+	lvls = stage2_pgtable_levels(phys_shift);
+	if (lvls < 2)
+		lvls = 2;
+	vtcr |= VTCR_EL2_LVLS_TO_SL0(lvls);
+
+#ifdef CONFIG_ARM64_HW_AFDBM
+	/*
+	 * Enable the Hardware Access Flag management, unconditionally
+	 * on all CPUs. In systems that have asymmetric support for the feature
+	 * this allows KVM to leverage hardware support on the subset of cores
+	 * that implement the feature.
+	 *
+	 * The architecture requires VTCR_EL2.HA to be RES0 (thus ignored by
+	 * hardware) on implementations that do not advertise support for the
+	 * feature. As such, setting HA unconditionally is safe, unless you
+	 * happen to be running on a design that has unadvertised support for
+	 * HAFDBS. Here be dragons.
+	 */
+	if (!cpus_have_final_cap(ARM64_WORKAROUND_AMPERE_AC03_CPU_38))
+		vtcr |= VTCR_EL2_HA;
+#endif /* CONFIG_ARM64_HW_AFDBM */
+
+	/* Set the vmid bits */
+	vtcr |= (get_vmid_bits(mmfr1) == 16) ?
+		VTCR_EL2_VS_16BIT :
+		VTCR_EL2_VS_8BIT;
+
+	return vtcr;
+}
+
+static bool stage2_has_fwb(struct kvm_pgtable *pgt)
+{
+	if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+		return false;
+
+	return !(pgt->flags & KVM_PGTABLE_S2_NOFWB);
+}
+
+void kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
+				phys_addr_t addr, size_t size)
+{
+	unsigned long pages, inval_pages;
+
+	if (!system_supports_tlb_range()) {
+		kvm_call_hyp(__kvm_tlb_flush_vmid, mmu);
+		return;
+	}
+
+	pages = size >> PAGE_SHIFT;
+	while (pages > 0) {
+		inval_pages = min(pages, MAX_TLBI_RANGE_PAGES);
+		kvm_call_hyp(__kvm_tlb_flush_vmid_range, mmu, addr, inval_pages);
+
+		addr += inval_pages << PAGE_SHIFT;
+		pages -= inval_pages;
+	}
+}
+
+#define KVM_S2_MEMATTR(pgt, attr) PAGE_S2_MEMATTR(attr, stage2_has_fwb(pgt))
+
+static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot prot,
+				kvm_pte_t *ptep)
+{
+	bool device = prot & KVM_PGTABLE_PROT_DEVICE;
+	kvm_pte_t attr = device ? KVM_S2_MEMATTR(pgt, DEVICE_nGnRE) :
+			    KVM_S2_MEMATTR(pgt, NORMAL);
+	u32 sh = KVM_PTE_LEAF_ATTR_LO_S2_SH_IS;
+
+	if (!(prot & KVM_PGTABLE_PROT_X))
+		attr |= KVM_PTE_LEAF_ATTR_HI_S2_XN;
+	else if (device)
+		return -EINVAL;
+
+	if (prot & KVM_PGTABLE_PROT_R)
+		attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R;
+
+	if (prot & KVM_PGTABLE_PROT_W)
+		attr |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
+
+	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
+	attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF;
+	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
+	*ptep = attr;
+
+	return 0;
+}
+
+enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte)
+{
+	enum kvm_pgtable_prot prot = pte & KVM_PTE_LEAF_ATTR_HI_SW;
+
+	if (!kvm_pte_valid(pte))
+		return prot;
+
+	if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R)
+		prot |= KVM_PGTABLE_PROT_R;
+	if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W)
+		prot |= KVM_PGTABLE_PROT_W;
+	if (!(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN))
+		prot |= KVM_PGTABLE_PROT_X;
+
+	return prot;
+}
+
+static bool stage2_pte_needs_update(kvm_pte_t old, kvm_pte_t new)
+{
+	if (!kvm_pte_valid(old) || !kvm_pte_valid(new))
+		return true;
+
+	return ((old ^ new) & (~KVM_PTE_LEAF_ATTR_S2_PERMS));
+}
+
+static bool stage2_pte_is_counted(kvm_pte_t pte)
+{
+	/*
+	 * The refcount tracks valid entries as well as invalid entries if they
+	 * encode ownership of a page to another entity than the page-table
+	 * owner, whose id is 0.
+	 */
+	return !!pte;
+}
+
+static bool stage2_pte_is_locked(kvm_pte_t pte)
+{
+	return !kvm_pte_valid(pte) && (pte & KVM_INVALID_PTE_LOCKED);
+}
+
+static bool stage2_try_set_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t new)
+{
+	if (!kvm_pgtable_walk_shared(ctx)) {
+		WRITE_ONCE(*ctx->ptep, new);
+		return true;
+	}
+
+	return cmpxchg(ctx->ptep, ctx->old, new) == ctx->old;
+}
+
+/**
+ * stage2_try_break_pte() - Invalidates a pte according to the
+ *			    'break-before-make' requirements of the
+ *			    architecture.
+ *
+ * @ctx: context of the visited pte.
+ * @mmu: stage-2 mmu
+ *
+ * Returns: true if the pte was successfully broken.
+ *
+ * If the removed pte was valid, performs the necessary serialization and TLB
+ * invalidation for the old value. For counted ptes, drops the reference count
+ * on the containing table page.
+ */
+static bool stage2_try_break_pte(const struct kvm_pgtable_visit_ctx *ctx,
+				 struct kvm_s2_mmu *mmu)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (stage2_pte_is_locked(ctx->old)) {
+		/*
+		 * Should never occur if this walker has exclusive access to the
+		 * page tables.
+		 */
+		WARN_ON(!kvm_pgtable_walk_shared(ctx));
+		return false;
+	}
+
+	if (!stage2_try_set_pte(ctx, KVM_INVALID_PTE_LOCKED))
+		return false;
+
+	if (!kvm_pgtable_walk_skip_bbm_tlbi(ctx)) {
+		/*
+		 * Perform the appropriate TLB invalidation based on the
+		 * evicted pte value (if any).
+		 */
+		if (kvm_pte_table(ctx->old, ctx->level))
+			kvm_tlb_flush_vmid_range(mmu, ctx->addr,
+						kvm_granule_size(ctx->level));
+		else if (kvm_pte_valid(ctx->old))
+			kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
+				     ctx->addr, ctx->level);
+	}
+
+	if (stage2_pte_is_counted(ctx->old))
+		mm_ops->put_page(ctx->ptep);
+
+	return true;
+}
+
+static void stage2_make_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t new)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	WARN_ON(!stage2_pte_is_locked(*ctx->ptep));
+
+	if (stage2_pte_is_counted(new))
+		mm_ops->get_page(ctx->ptep);
+
+	smp_store_release(ctx->ptep, new);
+}
+
+static bool stage2_unmap_defer_tlb_flush(struct kvm_pgtable *pgt)
+{
+	/*
+	 * If FEAT_TLBIRANGE is implemented, defer the individual
+	 * TLB invalidations until the entire walk is finished, and
+	 * then use the range-based TLBI instructions to do the
+	 * invalidations. Condition deferred TLB invalidation on the
+	 * system supporting FWB as the optimization is entirely
+	 * pointless when the unmap walker needs to perform CMOs.
+	 */
+	return system_supports_tlb_range() && stage2_has_fwb(pgt);
+}
+
+static void stage2_unmap_put_pte(const struct kvm_pgtable_visit_ctx *ctx,
+				struct kvm_s2_mmu *mmu,
+				struct kvm_pgtable_mm_ops *mm_ops)
+{
+	struct kvm_pgtable *pgt = ctx->arg;
+
+	/*
+	 * Clear the existing PTE, and perform break-before-make if it was
+	 * valid. Depending on the system support, defer the TLB maintenance
+	 * for the same until the entire unmap walk is completed.
+	 */
+	if (kvm_pte_valid(ctx->old)) {
+		kvm_clear_pte(ctx->ptep);
+
+		if (!stage2_unmap_defer_tlb_flush(pgt))
+			kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
+					ctx->addr, ctx->level);
+	}
+
+	mm_ops->put_page(ctx->ptep);
+}
+
+static bool stage2_pte_cacheable(struct kvm_pgtable *pgt, kvm_pte_t pte)
+{
+	u64 memattr = pte & KVM_PTE_LEAF_ATTR_LO_S2_MEMATTR;
+	return memattr == KVM_S2_MEMATTR(pgt, NORMAL);
+}
+
+static bool stage2_pte_executable(kvm_pte_t pte)
+{
+	return !(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN);
+}
+
+static u64 stage2_map_walker_phys_addr(const struct kvm_pgtable_visit_ctx *ctx,
+				       const struct stage2_map_data *data)
+{
+	u64 phys = data->phys;
+
+	/*
+	 * Stage-2 walks to update ownership data are communicated to the map
+	 * walker using an invalid PA. Avoid offsetting an already invalid PA,
+	 * which could overflow and make the address valid again.
+	 */
+	if (!kvm_phys_is_valid(phys))
+		return phys;
+
+	/*
+	 * Otherwise, work out the correct PA based on how far the walk has
+	 * gotten.
+	 */
+	return phys + (ctx->addr - ctx->start);
+}
+
+static bool stage2_leaf_mapping_allowed(const struct kvm_pgtable_visit_ctx *ctx,
+					struct stage2_map_data *data)
+{
+	u64 phys = stage2_map_walker_phys_addr(ctx, data);
+
+	if (data->force_pte && (ctx->level < (KVM_PGTABLE_MAX_LEVELS - 1)))
+		return false;
+
+	return kvm_block_mapping_supported(ctx, phys);
+}
+
+static int stage2_map_walker_try_leaf(const struct kvm_pgtable_visit_ctx *ctx,
+				      struct stage2_map_data *data)
+{
+	kvm_pte_t new;
+	u64 phys = stage2_map_walker_phys_addr(ctx, data);
+	u64 granule = kvm_granule_size(ctx->level);
+	struct kvm_pgtable *pgt = data->mmu->pgt;
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (!stage2_leaf_mapping_allowed(ctx, data))
+		return -E2BIG;
+
+	if (kvm_phys_is_valid(phys))
+		new = kvm_init_valid_leaf_pte(phys, data->attr, ctx->level);
+	else
+		new = kvm_init_invalid_leaf_owner(data->owner_id);
+
+	/*
+	 * Skip updating the PTE if we are trying to recreate the exact
+	 * same mapping or only change the access permissions. Instead,
+	 * the vCPU will exit one more time from guest if still needed
+	 * and then go through the path of relaxing permissions.
+	 */
+	if (!stage2_pte_needs_update(ctx->old, new))
+		return -EAGAIN;
+
+	if (!stage2_try_break_pte(ctx, data->mmu))
+		return -EAGAIN;
+
+	/* Perform CMOs before installation of the guest stage-2 PTE */
+	if (!kvm_pgtable_walk_skip_cmo(ctx) && mm_ops->dcache_clean_inval_poc &&
+	    stage2_pte_cacheable(pgt, new))
+		mm_ops->dcache_clean_inval_poc(kvm_pte_follow(new, mm_ops),
+					       granule);
+
+	if (!kvm_pgtable_walk_skip_cmo(ctx) && mm_ops->icache_inval_pou &&
+	    stage2_pte_executable(new))
+		mm_ops->icache_inval_pou(kvm_pte_follow(new, mm_ops), granule);
+
+	stage2_make_pte(ctx, new);
+
+	return 0;
+}
+
+static int stage2_map_walk_table_pre(const struct kvm_pgtable_visit_ctx *ctx,
+				     struct stage2_map_data *data)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+	kvm_pte_t *childp = kvm_pte_follow(ctx->old, mm_ops);
+	int ret;
+
+	if (!stage2_leaf_mapping_allowed(ctx, data))
+		return 0;
+
+	ret = stage2_map_walker_try_leaf(ctx, data);
+	if (ret)
+		return ret;
+
+	mm_ops->free_unlinked_table(childp, ctx->level);
+	return 0;
+}
+
+static int stage2_map_walk_leaf(const struct kvm_pgtable_visit_ctx *ctx,
+				struct stage2_map_data *data)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+	kvm_pte_t *childp, new;
+	int ret;
+
+	ret = stage2_map_walker_try_leaf(ctx, data);
+	if (ret != -E2BIG)
+		return ret;
+
+	if (WARN_ON(ctx->level == KVM_PGTABLE_MAX_LEVELS - 1))
+		return -EINVAL;
+
+	if (!data->memcache)
+		return -ENOMEM;
+
+	childp = mm_ops->zalloc_page(data->memcache);
+	if (!childp)
+		return -ENOMEM;
+
+	if (!stage2_try_break_pte(ctx, data->mmu)) {
+		mm_ops->put_page(childp);
+		return -EAGAIN;
+	}
+
+	/*
+	 * If we've run into an existing block mapping then replace it with
+	 * a table. Accesses beyond 'end' that fall within the new table
+	 * will be mapped lazily.
+	 */
+	new = kvm_init_table_pte(childp, mm_ops);
+	stage2_make_pte(ctx, new);
+
+	return 0;
+}
+
+/*
+ * The TABLE_PRE callback runs for table entries on the way down, looking
+ * for table entries which we could conceivably replace with a block entry
+ * for this mapping. If it finds one it replaces the entry and calls
+ * kvm_pgtable_mm_ops::free_unlinked_table() to tear down the detached table.
+ *
+ * Otherwise, the LEAF callback performs the mapping at the existing leaves
+ * instead.
+ */
+static int stage2_map_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			     enum kvm_pgtable_walk_flags visit)
+{
+	struct stage2_map_data *data = ctx->arg;
+
+	switch (visit) {
+	case KVM_PGTABLE_WALK_TABLE_PRE:
+		return stage2_map_walk_table_pre(ctx, data);
+	case KVM_PGTABLE_WALK_LEAF:
+		return stage2_map_walk_leaf(ctx, data);
+	default:
+		return -EINVAL;
+	}
+}
+
+int kvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			   u64 phys, enum kvm_pgtable_prot prot,
+			   void *mc, enum kvm_pgtable_walk_flags flags)
+{
+	int ret;
+	struct stage2_map_data map_data = {
+		.phys		= ALIGN_DOWN(phys, PAGE_SIZE),
+		.mmu		= pgt->mmu,
+		.memcache	= mc,
+		.force_pte	= pgt->force_pte_cb && pgt->force_pte_cb(addr, addr + size, prot),
+	};
+	struct kvm_pgtable_walker walker = {
+		.cb		= stage2_map_walker,
+		.flags		= flags |
+				  KVM_PGTABLE_WALK_TABLE_PRE |
+				  KVM_PGTABLE_WALK_LEAF,
+		.arg		= &map_data,
+	};
+
+	if (WARN_ON((pgt->flags & KVM_PGTABLE_S2_IDMAP) && (addr != phys)))
+		return -EINVAL;
+
+	ret = stage2_set_prot_attr(pgt, prot, &map_data.attr);
+	if (ret)
+		return ret;
+
+	ret = kvm_pgtable_walk(pgt, addr, size, &walker);
+	dsb(ishst);
+	return ret;
+}
+
+int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
+				 void *mc, u8 owner_id)
+{
+	int ret;
+	struct stage2_map_data map_data = {
+		.phys		= KVM_PHYS_INVALID,
+		.mmu		= pgt->mmu,
+		.memcache	= mc,
+		.owner_id	= owner_id,
+		.force_pte	= true,
+	};
+	struct kvm_pgtable_walker walker = {
+		.cb		= stage2_map_walker,
+		.flags		= KVM_PGTABLE_WALK_TABLE_PRE |
+				  KVM_PGTABLE_WALK_LEAF,
+		.arg		= &map_data,
+	};
+
+	if (owner_id > KVM_MAX_OWNER_ID)
+		return -EINVAL;
+
+	ret = kvm_pgtable_walk(pgt, addr, size, &walker);
+	return ret;
+}
+
+static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			       enum kvm_pgtable_walk_flags visit)
+{
+	struct kvm_pgtable *pgt = ctx->arg;
+	struct kvm_s2_mmu *mmu = pgt->mmu;
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+	kvm_pte_t *childp = NULL;
+	bool need_flush = false;
+
+	if (!kvm_pte_valid(ctx->old)) {
+		if (stage2_pte_is_counted(ctx->old)) {
+			kvm_clear_pte(ctx->ptep);
+			mm_ops->put_page(ctx->ptep);
+		}
+		return 0;
+	}
+
+	if (kvm_pte_table(ctx->old, ctx->level)) {
+		childp = kvm_pte_follow(ctx->old, mm_ops);
+
+		if (mm_ops->page_count(childp) != 1)
+			return 0;
+	} else if (stage2_pte_cacheable(pgt, ctx->old)) {
+		need_flush = !stage2_has_fwb(pgt);
+	}
+
+	/*
+	 * This is similar to the map() path in that we unmap the entire
+	 * block entry and rely on the remaining portions being faulted
+	 * back lazily.
+	 */
+	stage2_unmap_put_pte(ctx, mmu, mm_ops);
+
+	if (need_flush && mm_ops->dcache_clean_inval_poc)
+		mm_ops->dcache_clean_inval_poc(kvm_pte_follow(ctx->old, mm_ops),
+					       kvm_granule_size(ctx->level));
+
+	if (childp)
+		mm_ops->put_page(childp);
+
+	return 0;
+}
+
+int kvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	int ret;
+	struct kvm_pgtable_walker walker = {
+		.cb	= stage2_unmap_walker,
+		.arg	= pgt,
+		.flags	= KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
+	};
+
+	ret = kvm_pgtable_walk(pgt, addr, size, &walker);
+	if (stage2_unmap_defer_tlb_flush(pgt))
+		/* Perform the deferred TLB invalidations */
+		kvm_tlb_flush_vmid_range(pgt->mmu, addr, size);
+
+	return ret;
+}
+
+struct stage2_attr_data {
+	kvm_pte_t			attr_set;
+	kvm_pte_t			attr_clr;
+	kvm_pte_t			pte;
+	u32				level;
+};
+
+static int stage2_attr_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			      enum kvm_pgtable_walk_flags visit)
+{
+	kvm_pte_t pte = ctx->old;
+	struct stage2_attr_data *data = ctx->arg;
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (!kvm_pte_valid(ctx->old))
+		return -EAGAIN;
+
+	data->level = ctx->level;
+	data->pte = pte;
+	pte &= ~data->attr_clr;
+	pte |= data->attr_set;
+
+	/*
+	 * We may race with the CPU trying to set the access flag here,
+	 * but worst-case the access flag update gets lost and will be
+	 * set on the next access instead.
+	 */
+	if (data->pte != pte) {
+		/*
+		 * Invalidate instruction cache before updating the guest
+		 * stage-2 PTE if we are going to add executable permission.
+		 */
+		if (mm_ops->icache_inval_pou &&
+		    stage2_pte_executable(pte) && !stage2_pte_executable(ctx->old))
+			mm_ops->icache_inval_pou(kvm_pte_follow(pte, mm_ops),
+						  kvm_granule_size(ctx->level));
+
+		if (!stage2_try_set_pte(ctx, pte))
+			return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static int stage2_update_leaf_attrs(struct kvm_pgtable *pgt, u64 addr,
+				    u64 size, kvm_pte_t attr_set,
+				    kvm_pte_t attr_clr, kvm_pte_t *orig_pte,
+				    u32 *level, enum kvm_pgtable_walk_flags flags)
+{
+	int ret;
+	kvm_pte_t attr_mask = KVM_PTE_LEAF_ATTR_LO | KVM_PTE_LEAF_ATTR_HI;
+	struct stage2_attr_data data = {
+		.attr_set	= attr_set & attr_mask,
+		.attr_clr	= attr_clr & attr_mask,
+	};
+	struct kvm_pgtable_walker walker = {
+		.cb		= stage2_attr_walker,
+		.arg		= &data,
+		.flags		= flags | KVM_PGTABLE_WALK_LEAF,
+	};
+
+	ret = kvm_pgtable_walk(pgt, addr, size, &walker);
+	if (ret)
+		return ret;
+
+	if (orig_pte)
+		*orig_pte = data.pte;
+
+	if (level)
+		*level = data.level;
+	return 0;
+}
+
+int kvm_pgtable_stage2_wrprotect(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	return stage2_update_leaf_attrs(pgt, addr, size, 0,
+					KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W,
+					NULL, NULL, 0);
+}
+
+kvm_pte_t kvm_pgtable_stage2_mkyoung(struct kvm_pgtable *pgt, u64 addr)
+{
+	kvm_pte_t pte = 0;
+	int ret;
+
+	ret = stage2_update_leaf_attrs(pgt, addr, 1, KVM_PTE_LEAF_ATTR_LO_S2_AF, 0,
+				       &pte, NULL,
+				       KVM_PGTABLE_WALK_HANDLE_FAULT |
+				       KVM_PGTABLE_WALK_SHARED);
+	if (!ret)
+		dsb(ishst);
+
+	return pte;
+}
+
+struct stage2_age_data {
+	bool	mkold;
+	bool	young;
+};
+
+static int stage2_age_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			     enum kvm_pgtable_walk_flags visit)
+{
+	kvm_pte_t new = ctx->old & ~KVM_PTE_LEAF_ATTR_LO_S2_AF;
+	struct stage2_age_data *data = ctx->arg;
+
+	if (!kvm_pte_valid(ctx->old) || new == ctx->old)
+		return 0;
+
+	data->young = true;
+
+	/*
+	 * stage2_age_walker() is always called while holding the MMU lock for
+	 * write, so this will always succeed. Nonetheless, this deliberately
+	 * follows the race detection pattern of the other stage-2 walkers in
+	 * case the locking mechanics of the MMU notifiers is ever changed.
+	 */
+	if (data->mkold && !stage2_try_set_pte(ctx, new))
+		return -EAGAIN;
+
+	/*
+	 * "But where's the TLBI?!", you scream.
+	 * "Over in the core code", I sigh.
+	 *
+	 * See the '->clear_flush_young()' callback on the KVM mmu notifier.
+	 */
+	return 0;
+}
+
+bool kvm_pgtable_stage2_test_clear_young(struct kvm_pgtable *pgt, u64 addr,
+					 u64 size, bool mkold)
+{
+	struct stage2_age_data data = {
+		.mkold		= mkold,
+	};
+	struct kvm_pgtable_walker walker = {
+		.cb		= stage2_age_walker,
+		.arg		= &data,
+		.flags		= KVM_PGTABLE_WALK_LEAF,
+	};
+
+	WARN_ON(kvm_pgtable_walk(pgt, addr, size, &walker));
+	return data.young;
+}
+
+int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
+				   enum kvm_pgtable_prot prot)
+{
+	int ret;
+	u32 level;
+	kvm_pte_t set = 0, clr = 0;
+
+	if (prot & KVM_PTE_LEAF_ATTR_HI_SW)
+		return -EINVAL;
+
+	if (prot & KVM_PGTABLE_PROT_R)
+		set |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R;
+
+	if (prot & KVM_PGTABLE_PROT_W)
+		set |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W;
+
+	if (prot & KVM_PGTABLE_PROT_X)
+		clr |= KVM_PTE_LEAF_ATTR_HI_S2_XN;
+
+	ret = stage2_update_leaf_attrs(pgt, addr, 1, set, clr, NULL, &level,
+				       KVM_PGTABLE_WALK_HANDLE_FAULT |
+				       KVM_PGTABLE_WALK_SHARED);
+	if (!ret)
+		kvm_call_hyp(__kvm_tlb_flush_vmid_ipa_nsh, pgt->mmu, addr, level);
+	return ret;
+}
+
+static int stage2_flush_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			       enum kvm_pgtable_walk_flags visit)
+{
+	struct kvm_pgtable *pgt = ctx->arg;
+	struct kvm_pgtable_mm_ops *mm_ops = pgt->mm_ops;
+
+	if (!kvm_pte_valid(ctx->old) || !stage2_pte_cacheable(pgt, ctx->old))
+		return 0;
+
+	if (mm_ops->dcache_clean_inval_poc)
+		mm_ops->dcache_clean_inval_poc(kvm_pte_follow(ctx->old, mm_ops),
+					       kvm_granule_size(ctx->level));
+	return 0;
+}
+
+int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= stage2_flush_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= pgt,
+	};
+
+	if (stage2_has_fwb(pgt))
+		return 0;
+
+	return kvm_pgtable_walk(pgt, addr, size, &walker);
+}
+
+kvm_pte_t *kvm_pgtable_stage2_create_unlinked(struct kvm_pgtable *pgt,
+					      u64 phys, u32 level,
+					      enum kvm_pgtable_prot prot,
+					      void *mc, bool force_pte)
+{
+	struct stage2_map_data map_data = {
+		.phys		= phys,
+		.mmu		= pgt->mmu,
+		.memcache	= mc,
+		.force_pte	= force_pte,
+	};
+	struct kvm_pgtable_walker walker = {
+		.cb		= stage2_map_walker,
+		.flags		= KVM_PGTABLE_WALK_LEAF |
+				  KVM_PGTABLE_WALK_SKIP_BBM_TLBI |
+				  KVM_PGTABLE_WALK_SKIP_CMO,
+		.arg		= &map_data,
+	};
+	/*
+	 * The input address (.addr) is irrelevant for walking an
+	 * unlinked table. Construct an ambiguous IA range to map
+	 * kvm_granule_size(level) worth of memory.
+	 */
+	struct kvm_pgtable_walk_data data = {
+		.walker	= &walker,
+		.addr	= 0,
+		.end	= kvm_granule_size(level),
+	};
+	struct kvm_pgtable_mm_ops *mm_ops = pgt->mm_ops;
+	kvm_pte_t *pgtable;
+	int ret;
+
+	if (!IS_ALIGNED(phys, kvm_granule_size(level)))
+		return ERR_PTR(-EINVAL);
+
+	ret = stage2_set_prot_attr(pgt, prot, &map_data.attr);
+	if (ret)
+		return ERR_PTR(ret);
+
+	pgtable = mm_ops->zalloc_page(mc);
+	if (!pgtable)
+		return ERR_PTR(-ENOMEM);
+
+	ret = __kvm_pgtable_walk(&data, mm_ops, (kvm_pteref_t)pgtable,
+				 level + 1);
+	if (ret) {
+		kvm_pgtable_stage2_free_unlinked(mm_ops, pgtable, level);
+		mm_ops->put_page(pgtable);
+		return ERR_PTR(ret);
+	}
+
+	return pgtable;
+}
+
+/*
+ * Get the number of page-tables needed to replace a block with a
+ * fully populated tree up to the PTE entries. Note that @level is
+ * interpreted as in "level @level entry".
+ */
+static int stage2_block_get_nr_page_tables(u32 level)
+{
+	switch (level) {
+	case 1:
+		return PTRS_PER_PTE + 1;
+	case 2:
+		return 1;
+	case 3:
+		return 0;
+	default:
+		WARN_ON_ONCE(level < KVM_PGTABLE_MIN_BLOCK_LEVEL ||
+			     level >= KVM_PGTABLE_MAX_LEVELS);
+		return -EINVAL;
+	};
+}
+
+static int stage2_split_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			       enum kvm_pgtable_walk_flags visit)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+	struct kvm_mmu_memory_cache *mc = ctx->arg;
+	struct kvm_s2_mmu *mmu;
+	kvm_pte_t pte = ctx->old, new, *childp;
+	enum kvm_pgtable_prot prot;
+	u32 level = ctx->level;
+	bool force_pte;
+	int nr_pages;
+	u64 phys;
+
+	/* No huge-pages exist at the last level */
+	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
+		return 0;
+
+	/* We only split valid block mappings */
+	if (!kvm_pte_valid(pte))
+		return 0;
+
+	nr_pages = stage2_block_get_nr_page_tables(level);
+	if (nr_pages < 0)
+		return nr_pages;
+
+	if (mc->nobjs >= nr_pages) {
+		/* Build a tree mapped down to the PTE granularity. */
+		force_pte = true;
+	} else {
+		/*
+		 * Don't force PTEs, so create_unlinked() below does
+		 * not populate the tree up to the PTE level. The
+		 * consequence is that the call will require a single
+		 * page of level 2 entries at level 1, or a single
+		 * page of PTEs at level 2. If we are at level 1, the
+		 * PTEs will be created recursively.
+		 */
+		force_pte = false;
+		nr_pages = 1;
+	}
+
+	if (mc->nobjs < nr_pages)
+		return -ENOMEM;
+
+	mmu = container_of(mc, struct kvm_s2_mmu, split_page_cache);
+	phys = kvm_pte_to_phys(pte);
+	prot = kvm_pgtable_stage2_pte_prot(pte);
+
+	childp = kvm_pgtable_stage2_create_unlinked(mmu->pgt, phys,
+						    level, prot, mc, force_pte);
+	if (IS_ERR(childp))
+		return PTR_ERR(childp);
+
+	if (!stage2_try_break_pte(ctx, mmu)) {
+		kvm_pgtable_stage2_free_unlinked(mm_ops, childp, level);
+		mm_ops->put_page(childp);
+		return -EAGAIN;
+	}
+
+	/*
+	 * Note, the contents of the page table are guaranteed to be made
+	 * visible before the new PTE is assigned because stage2_make_pte()
+	 * writes the PTE using smp_store_release().
+	 */
+	new = kvm_init_table_pte(childp, mm_ops);
+	stage2_make_pte(ctx, new);
+	dsb(ishst);
+	return 0;
+}
+
+int kvm_pgtable_stage2_split(struct kvm_pgtable *pgt, u64 addr, u64 size,
+			     struct kvm_mmu_memory_cache *mc)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= stage2_split_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= mc,
+	};
+
+	return kvm_pgtable_walk(pgt, addr, size, &walker);
+}
+
+int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_s2_mmu *mmu,
+			      struct kvm_pgtable_mm_ops *mm_ops,
+			      enum kvm_pgtable_stage2_flags flags,
+			      kvm_pgtable_force_pte_cb_t force_pte_cb)
+{
+	size_t pgd_sz;
+	u64 vtcr = mmu->arch->vtcr;
+	u32 ia_bits = VTCR_EL2_IPA(vtcr);
+	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
+	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+
+	pgd_sz = kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
+	pgt->pgd = (kvm_pteref_t)mm_ops->zalloc_pages_exact(pgd_sz);
+	if (!pgt->pgd)
+		return -ENOMEM;
+
+	pgt->ia_bits		= ia_bits;
+	pgt->start_level	= start_level;
+	pgt->mm_ops		= mm_ops;
+	pgt->mmu		= mmu;
+	pgt->flags		= flags;
+	pgt->force_pte_cb	= force_pte_cb;
+
+	/* Ensure zeroed PGD pages are visible to the hardware walker */
+	dsb(ishst);
+	return 0;
+}
+
+size_t kvm_pgtable_stage2_pgd_size(u64 vtcr)
+{
+	u32 ia_bits = VTCR_EL2_IPA(vtcr);
+	u32 sl0 = FIELD_GET(VTCR_EL2_SL0_MASK, vtcr);
+	u32 start_level = VTCR_EL2_TGRAN_SL0_BASE - sl0;
+
+	return kvm_pgd_pages(ia_bits, start_level) * PAGE_SIZE;
+}
+
+static int stage2_free_walker(const struct kvm_pgtable_visit_ctx *ctx,
+			      enum kvm_pgtable_walk_flags visit)
+{
+	struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
+
+	if (!stage2_pte_is_counted(ctx->old))
+		return 0;
+
+	mm_ops->put_page(ctx->ptep);
+
+	if (kvm_pte_table(ctx->old, ctx->level))
+		mm_ops->put_page(kvm_pte_follow(ctx->old, mm_ops));
+
+	return 0;
+}
+
+void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
+{
+	size_t pgd_sz;
+	struct kvm_pgtable_walker walker = {
+		.cb	= stage2_free_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF |
+			  KVM_PGTABLE_WALK_TABLE_POST,
+	};
+
+	WARN_ON(kvm_pgtable_walk(pgt, 0, BIT(pgt->ia_bits), &walker));
+	pgd_sz = kvm_pgd_pages(pgt->ia_bits, pgt->start_level) * PAGE_SIZE;
+	pgt->mm_ops->free_pages_exact(kvm_dereference_pteref(&walker, pgt->pgd), pgd_sz);
+	pgt->pgd = NULL;
+}
+
+void kvm_pgtable_stage2_free_unlinked(struct kvm_pgtable_mm_ops *mm_ops, void *pgtable, u32 level)
+{
+	kvm_pteref_t ptep = (kvm_pteref_t)pgtable;
+	struct kvm_pgtable_walker walker = {
+		.cb	= stage2_free_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF |
+			  KVM_PGTABLE_WALK_TABLE_POST,
+	};
+	struct kvm_pgtable_walk_data data = {
+		.walker	= &walker,
+
+		/*
+		 * At this point the IPA really doesn't matter, as the page
+		 * table being traversed has already been removed from the stage
+		 * 2. Set an appropriate range to cover the entire page table.
+		 */
+		.addr	= 0,
+		.end	= kvm_granule_size(level),
+	};
+
+	WARN_ON(__kvm_pgtable_walk(&data, mm_ops, ptep, level + 1));
+
+	WARN_ON(mm_ops->page_count(pgtable) != 1);
+	mm_ops->put_page(pgtable);
+}
diff --git a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
new file mode 100644
index 000000000..87a54375b
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/adjust_pc.h>
+
+#include <linux/compiler.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/kvm_host.h>
+#include <linux/swab.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+static bool __is_be(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_mode_is_32bit(vcpu))
+		return !!(read_sysreg_el2(SYS_SPSR) & PSR_AA32_E_BIT);
+
+	return !!(read_sysreg(SCTLR_EL1) & SCTLR_ELx_EE);
+}
+
+/*
+ * __vgic_v2_perform_cpuif_access -- perform a GICV access on behalf of the
+ *				     guest.
+ *
+ * @vcpu: the offending vcpu
+ *
+ * Returns:
+ *  1: GICV access successfully performed
+ *  0: Not a GICV access
+ * -1: Illegal GICV access successfully performed
+ */
+int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
+	struct vgic_dist *vgic = &kvm->arch.vgic;
+	phys_addr_t fault_ipa;
+	void __iomem *addr;
+	int rd;
+
+	/* Build the full address */
+	fault_ipa  = kvm_vcpu_get_fault_ipa(vcpu);
+	fault_ipa |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
+
+	/* If not for GICV, move on */
+	if (fault_ipa <  vgic->vgic_cpu_base ||
+	    fault_ipa >= (vgic->vgic_cpu_base + KVM_VGIC_V2_CPU_SIZE))
+		return 0;
+
+	/* Reject anything but a 32bit access */
+	if (kvm_vcpu_dabt_get_as(vcpu) != sizeof(u32)) {
+		__kvm_skip_instr(vcpu);
+		return -1;
+	}
+
+	/* Not aligned? Don't bother */
+	if (fault_ipa & 3) {
+		__kvm_skip_instr(vcpu);
+		return -1;
+	}
+
+	rd = kvm_vcpu_dabt_get_rd(vcpu);
+	addr  = kvm_vgic_global_state.vcpu_hyp_va;
+	addr += fault_ipa - vgic->vgic_cpu_base;
+
+	if (kvm_vcpu_dabt_iswrite(vcpu)) {
+		u32 data = vcpu_get_reg(vcpu, rd);
+		if (__is_be(vcpu)) {
+			/* guest pre-swabbed data, undo this for writel() */
+			data = __kvm_swab32(data);
+		}
+		writel_relaxed(data, addr);
+	} else {
+		u32 data = readl_relaxed(addr);
+		if (__is_be(vcpu)) {
+			/* guest expects swabbed data */
+			data = __kvm_swab32(data);
+		}
+		vcpu_set_reg(vcpu, rd, data);
+	}
+
+	__kvm_skip_instr(vcpu);
+
+	return 1;
+}
diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c
new file mode 100644
index 000000000..6cb638b18
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vgic-v3-sr.c
@@ -0,0 +1,1143 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/adjust_pc.h>
+
+#include <linux/compiler.h>
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+
+#define vtr_to_max_lr_idx(v)		((v) & 0xf)
+#define vtr_to_nr_pre_bits(v)		((((u32)(v) >> 26) & 7) + 1)
+#define vtr_to_nr_apr_regs(v)		(1 << (vtr_to_nr_pre_bits(v) - 5))
+
+static u64 __gic_v3_get_lr(unsigned int lr)
+{
+	switch (lr & 0xf) {
+	case 0:
+		return read_gicreg(ICH_LR0_EL2);
+	case 1:
+		return read_gicreg(ICH_LR1_EL2);
+	case 2:
+		return read_gicreg(ICH_LR2_EL2);
+	case 3:
+		return read_gicreg(ICH_LR3_EL2);
+	case 4:
+		return read_gicreg(ICH_LR4_EL2);
+	case 5:
+		return read_gicreg(ICH_LR5_EL2);
+	case 6:
+		return read_gicreg(ICH_LR6_EL2);
+	case 7:
+		return read_gicreg(ICH_LR7_EL2);
+	case 8:
+		return read_gicreg(ICH_LR8_EL2);
+	case 9:
+		return read_gicreg(ICH_LR9_EL2);
+	case 10:
+		return read_gicreg(ICH_LR10_EL2);
+	case 11:
+		return read_gicreg(ICH_LR11_EL2);
+	case 12:
+		return read_gicreg(ICH_LR12_EL2);
+	case 13:
+		return read_gicreg(ICH_LR13_EL2);
+	case 14:
+		return read_gicreg(ICH_LR14_EL2);
+	case 15:
+		return read_gicreg(ICH_LR15_EL2);
+	}
+
+	unreachable();
+}
+
+static void __gic_v3_set_lr(u64 val, int lr)
+{
+	switch (lr & 0xf) {
+	case 0:
+		write_gicreg(val, ICH_LR0_EL2);
+		break;
+	case 1:
+		write_gicreg(val, ICH_LR1_EL2);
+		break;
+	case 2:
+		write_gicreg(val, ICH_LR2_EL2);
+		break;
+	case 3:
+		write_gicreg(val, ICH_LR3_EL2);
+		break;
+	case 4:
+		write_gicreg(val, ICH_LR4_EL2);
+		break;
+	case 5:
+		write_gicreg(val, ICH_LR5_EL2);
+		break;
+	case 6:
+		write_gicreg(val, ICH_LR6_EL2);
+		break;
+	case 7:
+		write_gicreg(val, ICH_LR7_EL2);
+		break;
+	case 8:
+		write_gicreg(val, ICH_LR8_EL2);
+		break;
+	case 9:
+		write_gicreg(val, ICH_LR9_EL2);
+		break;
+	case 10:
+		write_gicreg(val, ICH_LR10_EL2);
+		break;
+	case 11:
+		write_gicreg(val, ICH_LR11_EL2);
+		break;
+	case 12:
+		write_gicreg(val, ICH_LR12_EL2);
+		break;
+	case 13:
+		write_gicreg(val, ICH_LR13_EL2);
+		break;
+	case 14:
+		write_gicreg(val, ICH_LR14_EL2);
+		break;
+	case 15:
+		write_gicreg(val, ICH_LR15_EL2);
+		break;
+	}
+}
+
+static void __vgic_v3_write_ap0rn(u32 val, int n)
+{
+	switch (n) {
+	case 0:
+		write_gicreg(val, ICH_AP0R0_EL2);
+		break;
+	case 1:
+		write_gicreg(val, ICH_AP0R1_EL2);
+		break;
+	case 2:
+		write_gicreg(val, ICH_AP0R2_EL2);
+		break;
+	case 3:
+		write_gicreg(val, ICH_AP0R3_EL2);
+		break;
+	}
+}
+
+static void __vgic_v3_write_ap1rn(u32 val, int n)
+{
+	switch (n) {
+	case 0:
+		write_gicreg(val, ICH_AP1R0_EL2);
+		break;
+	case 1:
+		write_gicreg(val, ICH_AP1R1_EL2);
+		break;
+	case 2:
+		write_gicreg(val, ICH_AP1R2_EL2);
+		break;
+	case 3:
+		write_gicreg(val, ICH_AP1R3_EL2);
+		break;
+	}
+}
+
+static u32 __vgic_v3_read_ap0rn(int n)
+{
+	u32 val;
+
+	switch (n) {
+	case 0:
+		val = read_gicreg(ICH_AP0R0_EL2);
+		break;
+	case 1:
+		val = read_gicreg(ICH_AP0R1_EL2);
+		break;
+	case 2:
+		val = read_gicreg(ICH_AP0R2_EL2);
+		break;
+	case 3:
+		val = read_gicreg(ICH_AP0R3_EL2);
+		break;
+	default:
+		unreachable();
+	}
+
+	return val;
+}
+
+static u32 __vgic_v3_read_ap1rn(int n)
+{
+	u32 val;
+
+	switch (n) {
+	case 0:
+		val = read_gicreg(ICH_AP1R0_EL2);
+		break;
+	case 1:
+		val = read_gicreg(ICH_AP1R1_EL2);
+		break;
+	case 2:
+		val = read_gicreg(ICH_AP1R2_EL2);
+		break;
+	case 3:
+		val = read_gicreg(ICH_AP1R3_EL2);
+		break;
+	default:
+		unreachable();
+	}
+
+	return val;
+}
+
+void __vgic_v3_save_state(struct vgic_v3_cpu_if *cpu_if)
+{
+	u64 used_lrs = cpu_if->used_lrs;
+
+	/*
+	 * Make sure stores to the GIC via the memory mapped interface
+	 * are now visible to the system register interface when reading the
+	 * LRs, and when reading back the VMCR on non-VHE systems.
+	 */
+	if (used_lrs || !has_vhe()) {
+		if (!cpu_if->vgic_sre) {
+			dsb(sy);
+			isb();
+		}
+	}
+
+	if (used_lrs || cpu_if->its_vpe.its_vm) {
+		int i;
+		u32 elrsr;
+
+		elrsr = read_gicreg(ICH_ELRSR_EL2);
+
+		write_gicreg(cpu_if->vgic_hcr & ~ICH_HCR_EN, ICH_HCR_EL2);
+
+		for (i = 0; i < used_lrs; i++) {
+			if (elrsr & (1 << i))
+				cpu_if->vgic_lr[i] &= ~ICH_LR_STATE;
+			else
+				cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
+
+			__gic_v3_set_lr(0, i);
+		}
+	}
+}
+
+void __vgic_v3_restore_state(struct vgic_v3_cpu_if *cpu_if)
+{
+	u64 used_lrs = cpu_if->used_lrs;
+	int i;
+
+	if (used_lrs || cpu_if->its_vpe.its_vm) {
+		write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
+
+		for (i = 0; i < used_lrs; i++)
+			__gic_v3_set_lr(cpu_if->vgic_lr[i], i);
+	}
+
+	/*
+	 * Ensure that writes to the LRs, and on non-VHE systems ensure that
+	 * the write to the VMCR in __vgic_v3_activate_traps(), will have
+	 * reached the (re)distributors. This ensure the guest will read the
+	 * correct values from the memory-mapped interface.
+	 */
+	if (used_lrs || !has_vhe()) {
+		if (!cpu_if->vgic_sre) {
+			isb();
+			dsb(sy);
+		}
+	}
+}
+
+void __vgic_v3_activate_traps(struct vgic_v3_cpu_if *cpu_if)
+{
+	/*
+	 * VFIQEn is RES1 if ICC_SRE_EL1.SRE is 1. This causes a
+	 * Group0 interrupt (as generated in GICv2 mode) to be
+	 * delivered as a FIQ to the guest, with potentially fatal
+	 * consequences. So we must make sure that ICC_SRE_EL1 has
+	 * been actually programmed with the value we want before
+	 * starting to mess with the rest of the GIC, and VMCR_EL2 in
+	 * particular.  This logic must be called before
+	 * __vgic_v3_restore_state().
+	 */
+	if (!cpu_if->vgic_sre) {
+		write_gicreg(0, ICC_SRE_EL1);
+		isb();
+		write_gicreg(cpu_if->vgic_vmcr, ICH_VMCR_EL2);
+
+
+		if (has_vhe()) {
+			/*
+			 * Ensure that the write to the VMCR will have reached
+			 * the (re)distributors. This ensure the guest will
+			 * read the correct values from the memory-mapped
+			 * interface.
+			 */
+			isb();
+			dsb(sy);
+		}
+	}
+
+	/*
+	 * Prevent the guest from touching the GIC system registers if
+	 * SRE isn't enabled for GICv3 emulation.
+	 */
+	write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
+		     ICC_SRE_EL2);
+
+	/*
+	 * If we need to trap system registers, we must write
+	 * ICH_HCR_EL2 anyway, even if no interrupts are being
+	 * injected,
+	 */
+	if (static_branch_unlikely(&vgic_v3_cpuif_trap) ||
+	    cpu_if->its_vpe.its_vm)
+		write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
+}
+
+void __vgic_v3_deactivate_traps(struct vgic_v3_cpu_if *cpu_if)
+{
+	u64 val;
+
+	if (!cpu_if->vgic_sre) {
+		cpu_if->vgic_vmcr = read_gicreg(ICH_VMCR_EL2);
+	}
+
+	val = read_gicreg(ICC_SRE_EL2);
+	write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
+
+	if (!cpu_if->vgic_sre) {
+		/* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
+		isb();
+		write_gicreg(1, ICC_SRE_EL1);
+	}
+
+	/*
+	 * If we were trapping system registers, we enabled the VGIC even if
+	 * no interrupts were being injected, and we disable it again here.
+	 */
+	if (static_branch_unlikely(&vgic_v3_cpuif_trap) ||
+	    cpu_if->its_vpe.its_vm)
+		write_gicreg(0, ICH_HCR_EL2);
+}
+
+void __vgic_v3_save_aprs(struct vgic_v3_cpu_if *cpu_if)
+{
+	u64 val;
+	u32 nr_pre_bits;
+
+	val = read_gicreg(ICH_VTR_EL2);
+	nr_pre_bits = vtr_to_nr_pre_bits(val);
+
+	switch (nr_pre_bits) {
+	case 7:
+		cpu_if->vgic_ap0r[3] = __vgic_v3_read_ap0rn(3);
+		cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2);
+		fallthrough;
+	case 6:
+		cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1);
+		fallthrough;
+	default:
+		cpu_if->vgic_ap0r[0] = __vgic_v3_read_ap0rn(0);
+	}
+
+	switch (nr_pre_bits) {
+	case 7:
+		cpu_if->vgic_ap1r[3] = __vgic_v3_read_ap1rn(3);
+		cpu_if->vgic_ap1r[2] = __vgic_v3_read_ap1rn(2);
+		fallthrough;
+	case 6:
+		cpu_if->vgic_ap1r[1] = __vgic_v3_read_ap1rn(1);
+		fallthrough;
+	default:
+		cpu_if->vgic_ap1r[0] = __vgic_v3_read_ap1rn(0);
+	}
+}
+
+void __vgic_v3_restore_aprs(struct vgic_v3_cpu_if *cpu_if)
+{
+	u64 val;
+	u32 nr_pre_bits;
+
+	val = read_gicreg(ICH_VTR_EL2);
+	nr_pre_bits = vtr_to_nr_pre_bits(val);
+
+	switch (nr_pre_bits) {
+	case 7:
+		__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[3], 3);
+		__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[2], 2);
+		fallthrough;
+	case 6:
+		__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[1], 1);
+		fallthrough;
+	default:
+		__vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[0], 0);
+	}
+
+	switch (nr_pre_bits) {
+	case 7:
+		__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[3], 3);
+		__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[2], 2);
+		fallthrough;
+	case 6:
+		__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[1], 1);
+		fallthrough;
+	default:
+		__vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[0], 0);
+	}
+}
+
+void __vgic_v3_init_lrs(void)
+{
+	int max_lr_idx = vtr_to_max_lr_idx(read_gicreg(ICH_VTR_EL2));
+	int i;
+
+	for (i = 0; i <= max_lr_idx; i++)
+		__gic_v3_set_lr(0, i);
+}
+
+/*
+ * Return the GIC CPU configuration:
+ * - [31:0]  ICH_VTR_EL2
+ * - [62:32] RES0
+ * - [63]    MMIO (GICv2) capable
+ */
+u64 __vgic_v3_get_gic_config(void)
+{
+	u64 val, sre = read_gicreg(ICC_SRE_EL1);
+	unsigned long flags = 0;
+
+	/*
+	 * To check whether we have a MMIO-based (GICv2 compatible)
+	 * CPU interface, we need to disable the system register
+	 * view. To do that safely, we have to prevent any interrupt
+	 * from firing (which would be deadly).
+	 *
+	 * Note that this only makes sense on VHE, as interrupts are
+	 * already masked for nVHE as part of the exception entry to
+	 * EL2.
+	 */
+	if (has_vhe())
+		flags = local_daif_save();
+
+	/*
+	 * Table 11-2 "Permitted ICC_SRE_ELx.SRE settings" indicates
+	 * that to be able to set ICC_SRE_EL1.SRE to 0, all the
+	 * interrupt overrides must be set. You've got to love this.
+	 */
+	sysreg_clear_set(hcr_el2, 0, HCR_AMO | HCR_FMO | HCR_IMO);
+	isb();
+	write_gicreg(0, ICC_SRE_EL1);
+	isb();
+
+	val = read_gicreg(ICC_SRE_EL1);
+
+	write_gicreg(sre, ICC_SRE_EL1);
+	isb();
+	sysreg_clear_set(hcr_el2, HCR_AMO | HCR_FMO | HCR_IMO, 0);
+	isb();
+
+	if (has_vhe())
+		local_daif_restore(flags);
+
+	val  = (val & ICC_SRE_EL1_SRE) ? 0 : (1ULL << 63);
+	val |= read_gicreg(ICH_VTR_EL2);
+
+	return val;
+}
+
+u64 __vgic_v3_read_vmcr(void)
+{
+	return read_gicreg(ICH_VMCR_EL2);
+}
+
+void __vgic_v3_write_vmcr(u32 vmcr)
+{
+	write_gicreg(vmcr, ICH_VMCR_EL2);
+}
+
+static int __vgic_v3_bpr_min(void)
+{
+	/* See Pseudocode for VPriorityGroup */
+	return 8 - vtr_to_nr_pre_bits(read_gicreg(ICH_VTR_EL2));
+}
+
+static int __vgic_v3_get_group(struct kvm_vcpu *vcpu)
+{
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	u8 crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT;
+
+	return crm != 8;
+}
+
+#define GICv3_IDLE_PRIORITY	0xff
+
+static int __vgic_v3_highest_priority_lr(struct kvm_vcpu *vcpu, u32 vmcr,
+					 u64 *lr_val)
+{
+	unsigned int used_lrs = vcpu->arch.vgic_cpu.vgic_v3.used_lrs;
+	u8 priority = GICv3_IDLE_PRIORITY;
+	int i, lr = -1;
+
+	for (i = 0; i < used_lrs; i++) {
+		u64 val = __gic_v3_get_lr(i);
+		u8 lr_prio = (val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
+
+		/* Not pending in the state? */
+		if ((val & ICH_LR_STATE) != ICH_LR_PENDING_BIT)
+			continue;
+
+		/* Group-0 interrupt, but Group-0 disabled? */
+		if (!(val & ICH_LR_GROUP) && !(vmcr & ICH_VMCR_ENG0_MASK))
+			continue;
+
+		/* Group-1 interrupt, but Group-1 disabled? */
+		if ((val & ICH_LR_GROUP) && !(vmcr & ICH_VMCR_ENG1_MASK))
+			continue;
+
+		/* Not the highest priority? */
+		if (lr_prio >= priority)
+			continue;
+
+		/* This is a candidate */
+		priority = lr_prio;
+		*lr_val = val;
+		lr = i;
+	}
+
+	if (lr == -1)
+		*lr_val = ICC_IAR1_EL1_SPURIOUS;
+
+	return lr;
+}
+
+static int __vgic_v3_find_active_lr(struct kvm_vcpu *vcpu, int intid,
+				    u64 *lr_val)
+{
+	unsigned int used_lrs = vcpu->arch.vgic_cpu.vgic_v3.used_lrs;
+	int i;
+
+	for (i = 0; i < used_lrs; i++) {
+		u64 val = __gic_v3_get_lr(i);
+
+		if ((val & ICH_LR_VIRTUAL_ID_MASK) == intid &&
+		    (val & ICH_LR_ACTIVE_BIT)) {
+			*lr_val = val;
+			return i;
+		}
+	}
+
+	*lr_val = ICC_IAR1_EL1_SPURIOUS;
+	return -1;
+}
+
+static int __vgic_v3_get_highest_active_priority(void)
+{
+	u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
+	u32 hap = 0;
+	int i;
+
+	for (i = 0; i < nr_apr_regs; i++) {
+		u32 val;
+
+		/*
+		 * The ICH_AP0Rn_EL2 and ICH_AP1Rn_EL2 registers
+		 * contain the active priority levels for this VCPU
+		 * for the maximum number of supported priority
+		 * levels, and we return the full priority level only
+		 * if the BPR is programmed to its minimum, otherwise
+		 * we return a combination of the priority level and
+		 * subpriority, as determined by the setting of the
+		 * BPR, but without the full subpriority.
+		 */
+		val  = __vgic_v3_read_ap0rn(i);
+		val |= __vgic_v3_read_ap1rn(i);
+		if (!val) {
+			hap += 32;
+			continue;
+		}
+
+		return (hap + __ffs(val)) << __vgic_v3_bpr_min();
+	}
+
+	return GICv3_IDLE_PRIORITY;
+}
+
+static unsigned int __vgic_v3_get_bpr0(u32 vmcr)
+{
+	return (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT;
+}
+
+static unsigned int __vgic_v3_get_bpr1(u32 vmcr)
+{
+	unsigned int bpr;
+
+	if (vmcr & ICH_VMCR_CBPR_MASK) {
+		bpr = __vgic_v3_get_bpr0(vmcr);
+		if (bpr < 7)
+			bpr++;
+	} else {
+		bpr = (vmcr & ICH_VMCR_BPR1_MASK) >> ICH_VMCR_BPR1_SHIFT;
+	}
+
+	return bpr;
+}
+
+/*
+ * Convert a priority to a preemption level, taking the relevant BPR
+ * into account by zeroing the sub-priority bits.
+ */
+static u8 __vgic_v3_pri_to_pre(u8 pri, u32 vmcr, int grp)
+{
+	unsigned int bpr;
+
+	if (!grp)
+		bpr = __vgic_v3_get_bpr0(vmcr) + 1;
+	else
+		bpr = __vgic_v3_get_bpr1(vmcr);
+
+	return pri & (GENMASK(7, 0) << bpr);
+}
+
+/*
+ * The priority value is independent of any of the BPR values, so we
+ * normalize it using the minimal BPR value. This guarantees that no
+ * matter what the guest does with its BPR, we can always set/get the
+ * same value of a priority.
+ */
+static void __vgic_v3_set_active_priority(u8 pri, u32 vmcr, int grp)
+{
+	u8 pre, ap;
+	u32 val;
+	int apr;
+
+	pre = __vgic_v3_pri_to_pre(pri, vmcr, grp);
+	ap = pre >> __vgic_v3_bpr_min();
+	apr = ap / 32;
+
+	if (!grp) {
+		val = __vgic_v3_read_ap0rn(apr);
+		__vgic_v3_write_ap0rn(val | BIT(ap % 32), apr);
+	} else {
+		val = __vgic_v3_read_ap1rn(apr);
+		__vgic_v3_write_ap1rn(val | BIT(ap % 32), apr);
+	}
+}
+
+static int __vgic_v3_clear_highest_active_priority(void)
+{
+	u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
+	u32 hap = 0;
+	int i;
+
+	for (i = 0; i < nr_apr_regs; i++) {
+		u32 ap0, ap1;
+		int c0, c1;
+
+		ap0 = __vgic_v3_read_ap0rn(i);
+		ap1 = __vgic_v3_read_ap1rn(i);
+		if (!ap0 && !ap1) {
+			hap += 32;
+			continue;
+		}
+
+		c0 = ap0 ? __ffs(ap0) : 32;
+		c1 = ap1 ? __ffs(ap1) : 32;
+
+		/* Always clear the LSB, which is the highest priority */
+		if (c0 < c1) {
+			ap0 &= ~BIT(c0);
+			__vgic_v3_write_ap0rn(ap0, i);
+			hap += c0;
+		} else {
+			ap1 &= ~BIT(c1);
+			__vgic_v3_write_ap1rn(ap1, i);
+			hap += c1;
+		}
+
+		/* Rescale to 8 bits of priority */
+		return hap << __vgic_v3_bpr_min();
+	}
+
+	return GICv3_IDLE_PRIORITY;
+}
+
+static void __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u64 lr_val;
+	u8 lr_prio, pmr;
+	int lr, grp;
+
+	grp = __vgic_v3_get_group(vcpu);
+
+	lr = __vgic_v3_highest_priority_lr(vcpu, vmcr, &lr_val);
+	if (lr < 0)
+		goto spurious;
+
+	if (grp != !!(lr_val & ICH_LR_GROUP))
+		goto spurious;
+
+	pmr = (vmcr & ICH_VMCR_PMR_MASK) >> ICH_VMCR_PMR_SHIFT;
+	lr_prio = (lr_val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
+	if (pmr <= lr_prio)
+		goto spurious;
+
+	if (__vgic_v3_get_highest_active_priority() <= __vgic_v3_pri_to_pre(lr_prio, vmcr, grp))
+		goto spurious;
+
+	lr_val &= ~ICH_LR_STATE;
+	lr_val |= ICH_LR_ACTIVE_BIT;
+	__gic_v3_set_lr(lr_val, lr);
+	__vgic_v3_set_active_priority(lr_prio, vmcr, grp);
+	vcpu_set_reg(vcpu, rt, lr_val & ICH_LR_VIRTUAL_ID_MASK);
+	return;
+
+spurious:
+	vcpu_set_reg(vcpu, rt, ICC_IAR1_EL1_SPURIOUS);
+}
+
+static void __vgic_v3_clear_active_lr(int lr, u64 lr_val)
+{
+	lr_val &= ~ICH_LR_ACTIVE_BIT;
+	if (lr_val & ICH_LR_HW) {
+		u32 pid;
+
+		pid = (lr_val & ICH_LR_PHYS_ID_MASK) >> ICH_LR_PHYS_ID_SHIFT;
+		gic_write_dir(pid);
+	}
+
+	__gic_v3_set_lr(lr_val, lr);
+}
+
+static void __vgic_v3_bump_eoicount(void)
+{
+	u32 hcr;
+
+	hcr = read_gicreg(ICH_HCR_EL2);
+	hcr += 1 << ICH_HCR_EOIcount_SHIFT;
+	write_gicreg(hcr, ICH_HCR_EL2);
+}
+
+static void __vgic_v3_write_dir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 vid = vcpu_get_reg(vcpu, rt);
+	u64 lr_val;
+	int lr;
+
+	/* EOImode == 0, nothing to be done here */
+	if (!(vmcr & ICH_VMCR_EOIM_MASK))
+		return;
+
+	/* No deactivate to be performed on an LPI */
+	if (vid >= VGIC_MIN_LPI)
+		return;
+
+	lr = __vgic_v3_find_active_lr(vcpu, vid, &lr_val);
+	if (lr == -1) {
+		__vgic_v3_bump_eoicount();
+		return;
+	}
+
+	__vgic_v3_clear_active_lr(lr, lr_val);
+}
+
+static void __vgic_v3_write_eoir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 vid = vcpu_get_reg(vcpu, rt);
+	u64 lr_val;
+	u8 lr_prio, act_prio;
+	int lr, grp;
+
+	grp = __vgic_v3_get_group(vcpu);
+
+	/* Drop priority in any case */
+	act_prio = __vgic_v3_clear_highest_active_priority();
+
+	lr = __vgic_v3_find_active_lr(vcpu, vid, &lr_val);
+	if (lr == -1) {
+		/* Do not bump EOIcount for LPIs that aren't in the LRs */
+		if (!(vid >= VGIC_MIN_LPI))
+			__vgic_v3_bump_eoicount();
+		return;
+	}
+
+	/* EOImode == 1 and not an LPI, nothing to be done here */
+	if ((vmcr & ICH_VMCR_EOIM_MASK) && !(vid >= VGIC_MIN_LPI))
+		return;
+
+	lr_prio = (lr_val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
+
+	/* If priorities or group do not match, the guest has fscked-up. */
+	if (grp != !!(lr_val & ICH_LR_GROUP) ||
+	    __vgic_v3_pri_to_pre(lr_prio, vmcr, grp) != act_prio)
+		return;
+
+	/* Let's now perform the deactivation */
+	__vgic_v3_clear_active_lr(lr, lr_val);
+}
+
+static void __vgic_v3_read_igrpen0(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	vcpu_set_reg(vcpu, rt, !!(vmcr & ICH_VMCR_ENG0_MASK));
+}
+
+static void __vgic_v3_read_igrpen1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	vcpu_set_reg(vcpu, rt, !!(vmcr & ICH_VMCR_ENG1_MASK));
+}
+
+static void __vgic_v3_write_igrpen0(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u64 val = vcpu_get_reg(vcpu, rt);
+
+	if (val & 1)
+		vmcr |= ICH_VMCR_ENG0_MASK;
+	else
+		vmcr &= ~ICH_VMCR_ENG0_MASK;
+
+	__vgic_v3_write_vmcr(vmcr);
+}
+
+static void __vgic_v3_write_igrpen1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u64 val = vcpu_get_reg(vcpu, rt);
+
+	if (val & 1)
+		vmcr |= ICH_VMCR_ENG1_MASK;
+	else
+		vmcr &= ~ICH_VMCR_ENG1_MASK;
+
+	__vgic_v3_write_vmcr(vmcr);
+}
+
+static void __vgic_v3_read_bpr0(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	vcpu_set_reg(vcpu, rt, __vgic_v3_get_bpr0(vmcr));
+}
+
+static void __vgic_v3_read_bpr1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	vcpu_set_reg(vcpu, rt, __vgic_v3_get_bpr1(vmcr));
+}
+
+static void __vgic_v3_write_bpr0(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u64 val = vcpu_get_reg(vcpu, rt);
+	u8 bpr_min = __vgic_v3_bpr_min() - 1;
+
+	/* Enforce BPR limiting */
+	if (val < bpr_min)
+		val = bpr_min;
+
+	val <<= ICH_VMCR_BPR0_SHIFT;
+	val &= ICH_VMCR_BPR0_MASK;
+	vmcr &= ~ICH_VMCR_BPR0_MASK;
+	vmcr |= val;
+
+	__vgic_v3_write_vmcr(vmcr);
+}
+
+static void __vgic_v3_write_bpr1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u64 val = vcpu_get_reg(vcpu, rt);
+	u8 bpr_min = __vgic_v3_bpr_min();
+
+	if (vmcr & ICH_VMCR_CBPR_MASK)
+		return;
+
+	/* Enforce BPR limiting */
+	if (val < bpr_min)
+		val = bpr_min;
+
+	val <<= ICH_VMCR_BPR1_SHIFT;
+	val &= ICH_VMCR_BPR1_MASK;
+	vmcr &= ~ICH_VMCR_BPR1_MASK;
+	vmcr |= val;
+
+	__vgic_v3_write_vmcr(vmcr);
+}
+
+static void __vgic_v3_read_apxrn(struct kvm_vcpu *vcpu, int rt, int n)
+{
+	u32 val;
+
+	if (!__vgic_v3_get_group(vcpu))
+		val = __vgic_v3_read_ap0rn(n);
+	else
+		val = __vgic_v3_read_ap1rn(n);
+
+	vcpu_set_reg(vcpu, rt, val);
+}
+
+static void __vgic_v3_write_apxrn(struct kvm_vcpu *vcpu, int rt, int n)
+{
+	u32 val = vcpu_get_reg(vcpu, rt);
+
+	if (!__vgic_v3_get_group(vcpu))
+		__vgic_v3_write_ap0rn(val, n);
+	else
+		__vgic_v3_write_ap1rn(val, n);
+}
+
+static void __vgic_v3_read_apxr0(struct kvm_vcpu *vcpu,
+					    u32 vmcr, int rt)
+{
+	__vgic_v3_read_apxrn(vcpu, rt, 0);
+}
+
+static void __vgic_v3_read_apxr1(struct kvm_vcpu *vcpu,
+					    u32 vmcr, int rt)
+{
+	__vgic_v3_read_apxrn(vcpu, rt, 1);
+}
+
+static void __vgic_v3_read_apxr2(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	__vgic_v3_read_apxrn(vcpu, rt, 2);
+}
+
+static void __vgic_v3_read_apxr3(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	__vgic_v3_read_apxrn(vcpu, rt, 3);
+}
+
+static void __vgic_v3_write_apxr0(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	__vgic_v3_write_apxrn(vcpu, rt, 0);
+}
+
+static void __vgic_v3_write_apxr1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	__vgic_v3_write_apxrn(vcpu, rt, 1);
+}
+
+static void __vgic_v3_write_apxr2(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	__vgic_v3_write_apxrn(vcpu, rt, 2);
+}
+
+static void __vgic_v3_write_apxr3(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	__vgic_v3_write_apxrn(vcpu, rt, 3);
+}
+
+static void __vgic_v3_read_hppir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u64 lr_val;
+	int lr, lr_grp, grp;
+
+	grp = __vgic_v3_get_group(vcpu);
+
+	lr = __vgic_v3_highest_priority_lr(vcpu, vmcr, &lr_val);
+	if (lr == -1)
+		goto spurious;
+
+	lr_grp = !!(lr_val & ICH_LR_GROUP);
+	if (lr_grp != grp)
+		lr_val = ICC_IAR1_EL1_SPURIOUS;
+
+spurious:
+	vcpu_set_reg(vcpu, rt, lr_val & ICH_LR_VIRTUAL_ID_MASK);
+}
+
+static void __vgic_v3_read_pmr(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	vmcr &= ICH_VMCR_PMR_MASK;
+	vmcr >>= ICH_VMCR_PMR_SHIFT;
+	vcpu_set_reg(vcpu, rt, vmcr);
+}
+
+static void __vgic_v3_write_pmr(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 val = vcpu_get_reg(vcpu, rt);
+
+	val <<= ICH_VMCR_PMR_SHIFT;
+	val &= ICH_VMCR_PMR_MASK;
+	vmcr &= ~ICH_VMCR_PMR_MASK;
+	vmcr |= val;
+
+	write_gicreg(vmcr, ICH_VMCR_EL2);
+}
+
+static void __vgic_v3_read_rpr(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 val = __vgic_v3_get_highest_active_priority();
+	vcpu_set_reg(vcpu, rt, val);
+}
+
+static void __vgic_v3_read_ctlr(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 vtr, val;
+
+	vtr = read_gicreg(ICH_VTR_EL2);
+	/* PRIbits */
+	val = ((vtr >> 29) & 7) << ICC_CTLR_EL1_PRI_BITS_SHIFT;
+	/* IDbits */
+	val |= ((vtr >> 23) & 7) << ICC_CTLR_EL1_ID_BITS_SHIFT;
+	/* SEIS */
+	if (kvm_vgic_global_state.ich_vtr_el2 & ICH_VTR_SEIS_MASK)
+		val |= BIT(ICC_CTLR_EL1_SEIS_SHIFT);
+	/* A3V */
+	val |= ((vtr >> 21) & 1) << ICC_CTLR_EL1_A3V_SHIFT;
+	/* EOImode */
+	val |= ((vmcr & ICH_VMCR_EOIM_MASK) >> ICH_VMCR_EOIM_SHIFT) << ICC_CTLR_EL1_EOImode_SHIFT;
+	/* CBPR */
+	val |= (vmcr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT;
+
+	vcpu_set_reg(vcpu, rt, val);
+}
+
+static void __vgic_v3_write_ctlr(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 val = vcpu_get_reg(vcpu, rt);
+
+	if (val & ICC_CTLR_EL1_CBPR_MASK)
+		vmcr |= ICH_VMCR_CBPR_MASK;
+	else
+		vmcr &= ~ICH_VMCR_CBPR_MASK;
+
+	if (val & ICC_CTLR_EL1_EOImode_MASK)
+		vmcr |= ICH_VMCR_EOIM_MASK;
+	else
+		vmcr &= ~ICH_VMCR_EOIM_MASK;
+
+	write_gicreg(vmcr, ICH_VMCR_EL2);
+}
+
+int __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
+{
+	int rt;
+	u64 esr;
+	u32 vmcr;
+	void (*fn)(struct kvm_vcpu *, u32, int);
+	bool is_read;
+	u32 sysreg;
+
+	esr = kvm_vcpu_get_esr(vcpu);
+	if (vcpu_mode_is_32bit(vcpu)) {
+		if (!kvm_condition_valid(vcpu)) {
+			__kvm_skip_instr(vcpu);
+			return 1;
+		}
+
+		sysreg = esr_cp15_to_sysreg(esr);
+	} else {
+		sysreg = esr_sys64_to_sysreg(esr);
+	}
+
+	is_read = (esr & ESR_ELx_SYS64_ISS_DIR_MASK) == ESR_ELx_SYS64_ISS_DIR_READ;
+
+	switch (sysreg) {
+	case SYS_ICC_IAR0_EL1:
+	case SYS_ICC_IAR1_EL1:
+		if (unlikely(!is_read))
+			return 0;
+		fn = __vgic_v3_read_iar;
+		break;
+	case SYS_ICC_EOIR0_EL1:
+	case SYS_ICC_EOIR1_EL1:
+		if (unlikely(is_read))
+			return 0;
+		fn = __vgic_v3_write_eoir;
+		break;
+	case SYS_ICC_IGRPEN1_EL1:
+		if (is_read)
+			fn = __vgic_v3_read_igrpen1;
+		else
+			fn = __vgic_v3_write_igrpen1;
+		break;
+	case SYS_ICC_BPR1_EL1:
+		if (is_read)
+			fn = __vgic_v3_read_bpr1;
+		else
+			fn = __vgic_v3_write_bpr1;
+		break;
+	case SYS_ICC_AP0Rn_EL1(0):
+	case SYS_ICC_AP1Rn_EL1(0):
+		if (is_read)
+			fn = __vgic_v3_read_apxr0;
+		else
+			fn = __vgic_v3_write_apxr0;
+		break;
+	case SYS_ICC_AP0Rn_EL1(1):
+	case SYS_ICC_AP1Rn_EL1(1):
+		if (is_read)
+			fn = __vgic_v3_read_apxr1;
+		else
+			fn = __vgic_v3_write_apxr1;
+		break;
+	case SYS_ICC_AP0Rn_EL1(2):
+	case SYS_ICC_AP1Rn_EL1(2):
+		if (is_read)
+			fn = __vgic_v3_read_apxr2;
+		else
+			fn = __vgic_v3_write_apxr2;
+		break;
+	case SYS_ICC_AP0Rn_EL1(3):
+	case SYS_ICC_AP1Rn_EL1(3):
+		if (is_read)
+			fn = __vgic_v3_read_apxr3;
+		else
+			fn = __vgic_v3_write_apxr3;
+		break;
+	case SYS_ICC_HPPIR0_EL1:
+	case SYS_ICC_HPPIR1_EL1:
+		if (unlikely(!is_read))
+			return 0;
+		fn = __vgic_v3_read_hppir;
+		break;
+	case SYS_ICC_IGRPEN0_EL1:
+		if (is_read)
+			fn = __vgic_v3_read_igrpen0;
+		else
+			fn = __vgic_v3_write_igrpen0;
+		break;
+	case SYS_ICC_BPR0_EL1:
+		if (is_read)
+			fn = __vgic_v3_read_bpr0;
+		else
+			fn = __vgic_v3_write_bpr0;
+		break;
+	case SYS_ICC_DIR_EL1:
+		if (unlikely(is_read))
+			return 0;
+		fn = __vgic_v3_write_dir;
+		break;
+	case SYS_ICC_RPR_EL1:
+		if (unlikely(!is_read))
+			return 0;
+		fn = __vgic_v3_read_rpr;
+		break;
+	case SYS_ICC_CTLR_EL1:
+		if (is_read)
+			fn = __vgic_v3_read_ctlr;
+		else
+			fn = __vgic_v3_write_ctlr;
+		break;
+	case SYS_ICC_PMR_EL1:
+		if (is_read)
+			fn = __vgic_v3_read_pmr;
+		else
+			fn = __vgic_v3_write_pmr;
+		break;
+	default:
+		return 0;
+	}
+
+	vmcr = __vgic_v3_read_vmcr();
+	rt = kvm_vcpu_sys_get_rt(vcpu);
+	fn(vcpu, vmcr, rt);
+
+	__kvm_skip_instr(vcpu);
+
+	return 1;
+}
diff --git a/arch/arm64/kvm/hyp/vhe/Makefile b/arch/arm64/kvm/hyp/vhe/Makefile
new file mode 100644
index 000000000..3b9e5464b
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vhe/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Kernel-based Virtual Machine module, HYP/VHE part
+#
+
+asflags-y := -D__KVM_VHE_HYPERVISOR__
+ccflags-y := -D__KVM_VHE_HYPERVISOR__
+
+obj-y := timer-sr.o sysreg-sr.o debug-sr.o switch.o tlb.o
+obj-y += ../vgic-v3-sr.o ../aarch32.o ../vgic-v2-cpuif-proxy.o ../entry.o \
+	 ../fpsimd.o ../hyp-entry.o ../exception.o
diff --git a/arch/arm64/kvm/hyp/vhe/debug-sr.c b/arch/arm64/kvm/hyp/vhe/debug-sr.c
new file mode 100644
index 000000000..289689b26
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vhe/debug-sr.c
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/debug-sr.h>
+
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_hyp.h>
+
+void __debug_switch_to_guest(struct kvm_vcpu *vcpu)
+{
+	__debug_switch_to_guest_common(vcpu);
+}
+
+void __debug_switch_to_host(struct kvm_vcpu *vcpu)
+{
+	__debug_switch_to_host_common(vcpu);
+}
+
+u64 __kvm_get_mdcr_el2(void)
+{
+	return read_sysreg(mdcr_el2);
+}
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
new file mode 100644
index 000000000..448b17080
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/switch.h>
+
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+#include <linux/types.h>
+#include <linux/jump_label.h>
+#include <linux/percpu.h>
+#include <uapi/linux/psci.h>
+
+#include <kvm/arm_psci.h>
+
+#include <asm/barrier.h>
+#include <asm/cpufeature.h>
+#include <asm/kprobes.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/fpsimd.h>
+#include <asm/debug-monitors.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/vectors.h>
+
+/* VHE specific context */
+DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data);
+DEFINE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt);
+DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
+
+static void __activate_traps(struct kvm_vcpu *vcpu)
+{
+	u64 val;
+
+	___activate_traps(vcpu);
+
+	if (has_cntpoff()) {
+		struct timer_map map;
+
+		get_timer_map(vcpu, &map);
+
+		/*
+		 * We're entrering the guest. Reload the correct
+		 * values from memory now that TGE is clear.
+		 */
+		if (map.direct_ptimer == vcpu_ptimer(vcpu))
+			val = __vcpu_sys_reg(vcpu, CNTP_CVAL_EL0);
+		if (map.direct_ptimer == vcpu_hptimer(vcpu))
+			val = __vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2);
+
+		if (map.direct_ptimer) {
+			write_sysreg_el0(val, SYS_CNTP_CVAL);
+			isb();
+		}
+	}
+
+	val = read_sysreg(cpacr_el1);
+	val |= CPACR_ELx_TTA;
+	val &= ~(CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN |
+		 CPACR_EL1_SMEN_EL0EN | CPACR_EL1_SMEN_EL1EN);
+
+	/*
+	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
+	 * CPTR_EL2. In general, CPACR_EL1 has the same layout as CPTR_EL2,
+	 * except for some missing controls, such as TAM.
+	 * In this case, CPTR_EL2.TAM has the same position with or without
+	 * VHE (HCR.E2H == 1) which allows us to use here the CPTR_EL2.TAM
+	 * shift value for trapping the AMU accesses.
+	 */
+
+	val |= CPTR_EL2_TAM;
+
+	if (guest_owns_fp_regs(vcpu)) {
+		if (vcpu_has_sve(vcpu))
+			val |= CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN;
+	} else {
+		val &= ~(CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN);
+		__activate_traps_fpsimd32(vcpu);
+	}
+
+	write_sysreg(val, cpacr_el1);
+
+	write_sysreg(__this_cpu_read(kvm_hyp_vector), vbar_el1);
+}
+NOKPROBE_SYMBOL(__activate_traps);
+
+static void __deactivate_traps(struct kvm_vcpu *vcpu)
+{
+	const char *host_vectors = vectors;
+
+	___deactivate_traps(vcpu);
+
+	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+
+	if (has_cntpoff()) {
+		struct timer_map map;
+		u64 val, offset;
+
+		get_timer_map(vcpu, &map);
+
+		/*
+		 * We're exiting the guest. Save the latest CVAL value
+		 * to memory and apply the offset now that TGE is set.
+		 */
+		val = read_sysreg_el0(SYS_CNTP_CVAL);
+		if (map.direct_ptimer == vcpu_ptimer(vcpu))
+			__vcpu_sys_reg(vcpu, CNTP_CVAL_EL0) = val;
+		if (map.direct_ptimer == vcpu_hptimer(vcpu))
+			__vcpu_sys_reg(vcpu, CNTHP_CVAL_EL2) = val;
+
+		offset = read_sysreg_s(SYS_CNTPOFF_EL2);
+
+		if (map.direct_ptimer && offset) {
+			write_sysreg_el0(val + offset, SYS_CNTP_CVAL);
+			isb();
+		}
+	}
+
+	/*
+	 * ARM errata 1165522 and 1530923 require the actual execution of the
+	 * above before we can switch to the EL2/EL0 translation regime used by
+	 * the host.
+	 */
+	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));
+
+	kvm_reset_cptr_el2(vcpu);
+
+	if (!arm64_kernel_unmapped_at_el0())
+		host_vectors = __this_cpu_read(this_cpu_vector);
+	write_sysreg(host_vectors, vbar_el1);
+}
+NOKPROBE_SYMBOL(__deactivate_traps);
+
+/*
+ * Disable IRQs in {activate,deactivate}_traps_vhe_{load,put}() to
+ * prevent a race condition between context switching of PMUSERENR_EL0
+ * in __{activate,deactivate}_traps_common() and IPIs that attempts to
+ * update PMUSERENR_EL0. See also kvm_set_pmuserenr().
+ */
+void activate_traps_vhe_load(struct kvm_vcpu *vcpu)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__activate_traps_common(vcpu);
+	local_irq_restore(flags);
+}
+
+void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__deactivate_traps_common(vcpu);
+	local_irq_restore(flags);
+}
+
+static const exit_handler_fn hyp_exit_handlers[] = {
+	[0 ... ESR_ELx_EC_MAX]		= NULL,
+	[ESR_ELx_EC_CP15_32]		= kvm_hyp_handle_cp15_32,
+	[ESR_ELx_EC_SYS64]		= kvm_hyp_handle_sysreg,
+	[ESR_ELx_EC_SVE]		= kvm_hyp_handle_fpsimd,
+	[ESR_ELx_EC_FP_ASIMD]		= kvm_hyp_handle_fpsimd,
+	[ESR_ELx_EC_IABT_LOW]		= kvm_hyp_handle_iabt_low,
+	[ESR_ELx_EC_DABT_LOW]		= kvm_hyp_handle_dabt_low,
+	[ESR_ELx_EC_WATCHPT_LOW]	= kvm_hyp_handle_watchpt_low,
+	[ESR_ELx_EC_PAC]		= kvm_hyp_handle_ptrauth,
+};
+
+static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu)
+{
+	return hyp_exit_handlers;
+}
+
+static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	/*
+	 * If we were in HYP context on entry, adjust the PSTATE view
+	 * so that the usual helpers work correctly.
+	 */
+	if (unlikely(vcpu_get_flag(vcpu, VCPU_HYP_CONTEXT))) {
+		u64 mode = *vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT);
+
+		switch (mode) {
+		case PSR_MODE_EL1t:
+			mode = PSR_MODE_EL2t;
+			break;
+		case PSR_MODE_EL1h:
+			mode = PSR_MODE_EL2h;
+			break;
+		}
+
+		*vcpu_cpsr(vcpu) &= ~(PSR_MODE_MASK | PSR_MODE32_BIT);
+		*vcpu_cpsr(vcpu) |= mode;
+	}
+}
+
+/* Switch to the guest for VHE systems running in EL2 */
+static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	u64 exit_code;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	host_ctxt->__hyp_running_vcpu = vcpu;
+	guest_ctxt = &vcpu->arch.ctxt;
+
+	sysreg_save_host_state_vhe(host_ctxt);
+
+	/*
+	 * ARM erratum 1165522 requires us to configure both stage 1 and
+	 * stage 2 translation for the guest context before we clear
+	 * HCR_EL2.TGE.
+	 *
+	 * We have already configured the guest's stage 1 translation in
+	 * kvm_vcpu_load_sysregs_vhe above.  We must now call
+	 * __load_stage2 before __activate_traps, because
+	 * __load_stage2 configures stage 2 translation, and
+	 * __activate_traps clear HCR_EL2.TGE (among other things).
+	 */
+	__load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch);
+	__activate_traps(vcpu);
+
+	__kvm_adjust_pc(vcpu);
+
+	sysreg_restore_guest_state_vhe(guest_ctxt);
+	__debug_switch_to_guest(vcpu);
+
+	if (is_hyp_ctxt(vcpu))
+		vcpu_set_flag(vcpu, VCPU_HYP_CONTEXT);
+	else
+		vcpu_clear_flag(vcpu, VCPU_HYP_CONTEXT);
+
+	do {
+		/* Jump in the fire! */
+		exit_code = __guest_enter(vcpu);
+
+		/* And we're baaack! */
+	} while (fixup_guest_exit(vcpu, &exit_code));
+
+	sysreg_save_guest_state_vhe(guest_ctxt);
+
+	__deactivate_traps(vcpu);
+
+	sysreg_restore_host_state_vhe(host_ctxt);
+
+	if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED)
+		__fpsimd_save_fpexc32(vcpu);
+
+	__debug_switch_to_host(vcpu);
+
+	return exit_code;
+}
+NOKPROBE_SYMBOL(__kvm_vcpu_run_vhe);
+
+int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	local_daif_mask();
+
+	/*
+	 * Having IRQs masked via PMR when entering the guest means the GIC
+	 * will not signal the CPU of interrupts of lower priority, and the
+	 * only way to get out will be via guest exceptions.
+	 * Naturally, we want to avoid this.
+	 *
+	 * local_daif_mask() already sets GIC_PRIO_PSR_I_SET, we just need a
+	 * dsb to ensure the redistributor is forwards EL2 IRQs to the CPU.
+	 */
+	pmr_sync();
+
+	ret = __kvm_vcpu_run_vhe(vcpu);
+
+	/*
+	 * local_daif_restore() takes care to properly restore PSTATE.DAIF
+	 * and the GIC PMR if the host is using IRQ priorities.
+	 */
+	local_daif_restore(DAIF_PROCCTX_NOIRQ);
+
+	/*
+	 * When we exit from the guest we change a number of CPU configuration
+	 * parameters, such as traps.  We rely on the isb() in kvm_call_hyp*()
+	 * to make sure these changes take effect before running the host or
+	 * additional guests.
+	 */
+	return ret;
+}
+
+static void __hyp_call_panic(u64 spsr, u64 elr, u64 par)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_vcpu *vcpu;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	vcpu = host_ctxt->__hyp_running_vcpu;
+
+	__deactivate_traps(vcpu);
+	sysreg_restore_host_state_vhe(host_ctxt);
+
+	panic("HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%p\n",
+	      spsr, elr,
+	      read_sysreg_el2(SYS_ESR), read_sysreg_el2(SYS_FAR),
+	      read_sysreg(hpfar_el2), par, vcpu);
+}
+NOKPROBE_SYMBOL(__hyp_call_panic);
+
+void __noreturn hyp_panic(void)
+{
+	u64 spsr = read_sysreg_el2(SYS_SPSR);
+	u64 elr = read_sysreg_el2(SYS_ELR);
+	u64 par = read_sysreg_par();
+
+	__hyp_call_panic(spsr, elr, par);
+	unreachable();
+}
+
+asmlinkage void kvm_unexpected_el2_exception(void)
+{
+	__kvm_unexpected_el2_exception();
+}
diff --git a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
new file mode 100644
index 000000000..b35a178e7
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <hyp/sysreg-sr.h>
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kprobes.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_nested.h>
+
+/*
+ * VHE: Host and guest must save mdscr_el1 and sp_el0 (and the PC and
+ * pstate, which are handled as part of the el2 return state) on every
+ * switch (sp_el0 is being dealt with in the assembly code).
+ * tpidr_el0 and tpidrro_el0 only need to be switched when going
+ * to host userspace or a different VCPU.  EL1 registers only need to be
+ * switched when potentially going to run a different VCPU.  The latter two
+ * classes are handled as part of kvm_arch_vcpu_load and kvm_arch_vcpu_put.
+ */
+
+void sysreg_save_host_state_vhe(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_save_common_state(ctxt);
+}
+NOKPROBE_SYMBOL(sysreg_save_host_state_vhe);
+
+void sysreg_save_guest_state_vhe(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_save_common_state(ctxt);
+	__sysreg_save_el2_return_state(ctxt);
+}
+NOKPROBE_SYMBOL(sysreg_save_guest_state_vhe);
+
+void sysreg_restore_host_state_vhe(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_restore_common_state(ctxt);
+}
+NOKPROBE_SYMBOL(sysreg_restore_host_state_vhe);
+
+void sysreg_restore_guest_state_vhe(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_restore_common_state(ctxt);
+	__sysreg_restore_el2_return_state(ctxt);
+}
+NOKPROBE_SYMBOL(sysreg_restore_guest_state_vhe);
+
+/**
+ * kvm_vcpu_load_sysregs_vhe - Load guest system registers to the physical CPU
+ *
+ * @vcpu: The VCPU pointer
+ *
+ * Load system registers that do not affect the host's execution, for
+ * example EL1 system registers on a VHE system where the host kernel
+ * runs at EL2.  This function is called from KVM's vcpu_load() function
+ * and loading system register state early avoids having to load them on
+ * every entry to the VM.
+ */
+void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt;
+	struct kvm_cpu_context *host_ctxt;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	__sysreg_save_user_state(host_ctxt);
+
+	/*
+	 * When running a normal EL1 guest, we only load a new vcpu
+	 * after a context switch, which imvolves a DSB, so all
+	 * speculative EL1&0 walks will have already completed.
+	 * If running NV, the vcpu may transition between vEL1 and
+	 * vEL2 without a context switch, so make sure we complete
+	 * those walks before loading a new context.
+	 */
+	if (vcpu_has_nv(vcpu))
+		dsb(nsh);
+
+	/*
+	 * Load guest EL1 and user state
+	 *
+	 * We must restore the 32-bit state before the sysregs, thanks
+	 * to erratum #852523 (Cortex-A57) or #853709 (Cortex-A72).
+	 */
+	__sysreg32_restore_state(vcpu);
+	__sysreg_restore_user_state(guest_ctxt);
+	__sysreg_restore_el1_state(guest_ctxt);
+
+	vcpu_set_flag(vcpu, SYSREGS_ON_CPU);
+
+	activate_traps_vhe_load(vcpu);
+}
+
+/**
+ * kvm_vcpu_put_sysregs_vhe - Restore host system registers to the physical CPU
+ *
+ * @vcpu: The VCPU pointer
+ *
+ * Save guest system registers that do not affect the host's execution, for
+ * example EL1 system registers on a VHE system where the host kernel
+ * runs at EL2.  This function is called from KVM's vcpu_put() function
+ * and deferring saving system register state until we're no longer running the
+ * VCPU avoids having to save them on every exit from the VM.
+ */
+void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *guest_ctxt = &vcpu->arch.ctxt;
+	struct kvm_cpu_context *host_ctxt;
+
+	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	deactivate_traps_vhe_put(vcpu);
+
+	__sysreg_save_el1_state(guest_ctxt);
+	__sysreg_save_user_state(guest_ctxt);
+	__sysreg32_save_state(vcpu);
+
+	/* Restore host user state */
+	__sysreg_restore_user_state(host_ctxt);
+
+	vcpu_clear_flag(vcpu, SYSREGS_ON_CPU);
+}
diff --git a/arch/arm64/kvm/hyp/vhe/timer-sr.c b/arch/arm64/kvm/hyp/vhe/timer-sr.c
new file mode 100644
index 000000000..4cda674a8
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vhe/timer-sr.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <asm/kvm_hyp.h>
+
+void __kvm_timer_set_cntvoff(u64 cntvoff)
+{
+	write_sysreg(cntvoff, cntvoff_el2);
+}
diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
new file mode 100644
index 000000000..46bd43f61
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/irqflags.h>
+
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/tlbflush.h>
+
+struct tlb_inv_context {
+	unsigned long	flags;
+	u64		tcr;
+	u64		sctlr;
+};
+
+static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
+				  struct tlb_inv_context *cxt)
+{
+	u64 val;
+
+	local_irq_save(cxt->flags);
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		/*
+		 * For CPUs that are affected by ARM errata 1165522 or 1530923,
+		 * we cannot trust stage-1 to be in a correct state at that
+		 * point. Since we do not want to force a full load of the
+		 * vcpu state, we prevent the EL1 page-table walker to
+		 * allocate new TLBs. This is done by setting the EPD bits
+		 * in the TCR_EL1 register. We also need to prevent it to
+		 * allocate IPA->PA walks, so we enable the S1 MMU...
+		 */
+		val = cxt->tcr = read_sysreg_el1(SYS_TCR);
+		val |= TCR_EPD1_MASK | TCR_EPD0_MASK;
+		write_sysreg_el1(val, SYS_TCR);
+		val = cxt->sctlr = read_sysreg_el1(SYS_SCTLR);
+		val |= SCTLR_ELx_M;
+		write_sysreg_el1(val, SYS_SCTLR);
+	}
+
+	/*
+	 * With VHE enabled, we have HCR_EL2.{E2H,TGE} = {1,1}, and
+	 * most TLB operations target EL2/EL0. In order to affect the
+	 * guest TLBs (EL1/EL0), we need to change one of these two
+	 * bits. Changing E2H is impossible (goodbye TTBR1_EL2), so
+	 * let's flip TGE before executing the TLB operation.
+	 *
+	 * ARM erratum 1165522 requires some special handling (again),
+	 * as we need to make sure both stages of translation are in
+	 * place before clearing TGE. __load_stage2() already
+	 * has an ISB in order to deal with this.
+	 */
+	__load_stage2(mmu, mmu->arch);
+	val = read_sysreg(hcr_el2);
+	val &= ~HCR_TGE;
+	write_sysreg(val, hcr_el2);
+	isb();
+}
+
+static void __tlb_switch_to_host(struct tlb_inv_context *cxt)
+{
+	/*
+	 * We're done with the TLB operation, let's restore the host's
+	 * view of HCR_EL2.
+	 */
+	write_sysreg(0, vttbr_el2);
+	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	isb();
+
+	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
+		/* Restore the registers to what they were */
+		write_sysreg_el1(cxt->tcr, SYS_TCR);
+		write_sysreg_el1(cxt->sctlr, SYS_SCTLR);
+	}
+
+	local_irq_restore(cxt->flags);
+}
+
+void __kvm_tlb_flush_vmid_ipa(struct kvm_s2_mmu *mmu,
+			      phys_addr_t ipa, int level)
+{
+	struct tlb_inv_context cxt;
+
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	/*
+	 * We could do so much better if we had the VA as well.
+	 * Instead, we invalidate Stage-2 for this IPA, and the
+	 * whole of Stage-1. Weep...
+	 */
+	ipa >>= 12;
+	__tlbi_level(ipas2e1is, ipa, level);
+
+	/*
+	 * We have to ensure completion of the invalidation at Stage-2,
+	 * since a table walk on another CPU could refill a TLB with a
+	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
+	 * the Stage-1 invalidation happened first.
+	 */
+	dsb(ish);
+	__tlbi(vmalle1is);
+	dsb(ish);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid_ipa_nsh(struct kvm_s2_mmu *mmu,
+				  phys_addr_t ipa, int level)
+{
+	struct tlb_inv_context cxt;
+
+	dsb(nshst);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	/*
+	 * We could do so much better if we had the VA as well.
+	 * Instead, we invalidate Stage-2 for this IPA, and the
+	 * whole of Stage-1. Weep...
+	 */
+	ipa >>= 12;
+	__tlbi_level(ipas2e1, ipa, level);
+
+	/*
+	 * We have to ensure completion of the invalidation at Stage-2,
+	 * since a table walk on another CPU could refill a TLB with a
+	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
+	 * the Stage-1 invalidation happened first.
+	 */
+	dsb(nsh);
+	__tlbi(vmalle1);
+	dsb(nsh);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid_range(struct kvm_s2_mmu *mmu,
+				phys_addr_t start, unsigned long pages)
+{
+	struct tlb_inv_context cxt;
+	unsigned long stride;
+
+	/*
+	 * Since the range of addresses may not be mapped at
+	 * the same level, assume the worst case as PAGE_SIZE
+	 */
+	stride = PAGE_SIZE;
+	start = round_down(start, stride);
+
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	__flush_s2_tlb_range_op(ipas2e1is, start, pages, stride, 0);
+
+	dsb(ish);
+	__tlbi(vmalle1is);
+	dsb(ish);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_tlb_flush_vmid(struct kvm_s2_mmu *mmu)
+{
+	struct tlb_inv_context cxt;
+
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	__tlbi(vmalls12e1is);
+	dsb(ish);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_flush_cpu_context(struct kvm_s2_mmu *mmu)
+{
+	struct tlb_inv_context cxt;
+
+	/* Switch to requested VMID */
+	__tlb_switch_to_guest(mmu, &cxt);
+
+	__tlbi(vmalle1);
+	asm volatile("ic iallu");
+	dsb(nsh);
+	isb();
+
+	__tlb_switch_to_host(&cxt);
+}
+
+void __kvm_flush_vm_context(void)
+{
+	dsb(ishst);
+	__tlbi(alle1is);
+
+	/*
+	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
+	 * is necessary across a VMID rollover.
+	 *
+	 * VPIPT caches constrain lookup and maintenance to the active VMID,
+	 * so we need to invalidate lines with a stale VMID to avoid an ABA
+	 * race after multiple rollovers.
+	 *
+	 */
+	if (icache_is_vpipt())
+		asm volatile("ic ialluis");
+
+	dsb(ish);
+}
diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
new file mode 100644
index 000000000..7fb4df045
--- /dev/null
+++ b/arch/arm64/kvm/hypercalls.c
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 Arm Ltd.
+
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_emulate.h>
+
+#include <kvm/arm_hypercalls.h>
+#include <kvm/arm_psci.h>
+
+#define KVM_ARM_SMCCC_STD_FEATURES				\
+	GENMASK(KVM_REG_ARM_STD_BMAP_BIT_COUNT - 1, 0)
+#define KVM_ARM_SMCCC_STD_HYP_FEATURES				\
+	GENMASK(KVM_REG_ARM_STD_HYP_BMAP_BIT_COUNT - 1, 0)
+#define KVM_ARM_SMCCC_VENDOR_HYP_FEATURES			\
+	GENMASK(KVM_REG_ARM_VENDOR_HYP_BMAP_BIT_COUNT - 1, 0)
+
+static void kvm_ptp_get_time(struct kvm_vcpu *vcpu, u64 *val)
+{
+	struct system_time_snapshot systime_snapshot;
+	u64 cycles = ~0UL;
+	u32 feature;
+
+	/*
+	 * system time and counter value must captured at the same
+	 * time to keep consistency and precision.
+	 */
+	ktime_get_snapshot(&systime_snapshot);
+
+	/*
+	 * This is only valid if the current clocksource is the
+	 * architected counter, as this is the only one the guest
+	 * can see.
+	 */
+	if (systime_snapshot.cs_id != CSID_ARM_ARCH_COUNTER)
+		return;
+
+	/*
+	 * The guest selects one of the two reference counters
+	 * (virtual or physical) with the first argument of the SMCCC
+	 * call. In case the identifier is not supported, error out.
+	 */
+	feature = smccc_get_arg1(vcpu);
+	switch (feature) {
+	case KVM_PTP_VIRT_COUNTER:
+		cycles = systime_snapshot.cycles - vcpu->kvm->arch.timer_data.voffset;
+		break;
+	case KVM_PTP_PHYS_COUNTER:
+		cycles = systime_snapshot.cycles - vcpu->kvm->arch.timer_data.poffset;
+		break;
+	default:
+		return;
+	}
+
+	/*
+	 * This relies on the top bit of val[0] never being set for
+	 * valid values of system time, because that is *really* far
+	 * in the future (about 292 years from 1970, and at that stage
+	 * nobody will give a damn about it).
+	 */
+	val[0] = upper_32_bits(systime_snapshot.real);
+	val[1] = lower_32_bits(systime_snapshot.real);
+	val[2] = upper_32_bits(cycles);
+	val[3] = lower_32_bits(cycles);
+}
+
+static bool kvm_smccc_default_allowed(u32 func_id)
+{
+	switch (func_id) {
+	/*
+	 * List of function-ids that are not gated with the bitmapped
+	 * feature firmware registers, and are to be allowed for
+	 * servicing the call by default.
+	 */
+	case ARM_SMCCC_VERSION_FUNC_ID:
+	case ARM_SMCCC_ARCH_FEATURES_FUNC_ID:
+		return true;
+	default:
+		/* PSCI 0.2 and up is in the 0:0x1f range */
+		if (ARM_SMCCC_OWNER_NUM(func_id) == ARM_SMCCC_OWNER_STANDARD &&
+		    ARM_SMCCC_FUNC_NUM(func_id) <= 0x1f)
+			return true;
+
+		/*
+		 * KVM's PSCI 0.1 doesn't comply with SMCCC, and has
+		 * its own function-id base and range
+		 */
+		if (func_id >= KVM_PSCI_FN(0) && func_id <= KVM_PSCI_FN(3))
+			return true;
+
+		return false;
+	}
+}
+
+static bool kvm_smccc_test_fw_bmap(struct kvm_vcpu *vcpu, u32 func_id)
+{
+	struct kvm_smccc_features *smccc_feat = &vcpu->kvm->arch.smccc_feat;
+
+	switch (func_id) {
+	case ARM_SMCCC_TRNG_VERSION:
+	case ARM_SMCCC_TRNG_FEATURES:
+	case ARM_SMCCC_TRNG_GET_UUID:
+	case ARM_SMCCC_TRNG_RND32:
+	case ARM_SMCCC_TRNG_RND64:
+		return test_bit(KVM_REG_ARM_STD_BIT_TRNG_V1_0,
+				&smccc_feat->std_bmap);
+	case ARM_SMCCC_HV_PV_TIME_FEATURES:
+	case ARM_SMCCC_HV_PV_TIME_ST:
+		return test_bit(KVM_REG_ARM_STD_HYP_BIT_PV_TIME,
+				&smccc_feat->std_hyp_bmap);
+	case ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID:
+	case ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID:
+		return test_bit(KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT,
+				&smccc_feat->vendor_hyp_bmap);
+	case ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID:
+		return test_bit(KVM_REG_ARM_VENDOR_HYP_BIT_PTP,
+				&smccc_feat->vendor_hyp_bmap);
+	default:
+		return false;
+	}
+}
+
+#define SMC32_ARCH_RANGE_BEGIN	ARM_SMCCC_VERSION_FUNC_ID
+#define SMC32_ARCH_RANGE_END	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL,		\
+						   ARM_SMCCC_SMC_32,		\
+						   0, ARM_SMCCC_FUNC_MASK)
+
+#define SMC64_ARCH_RANGE_BEGIN	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL,		\
+						   ARM_SMCCC_SMC_64,		\
+						   0, 0)
+#define SMC64_ARCH_RANGE_END	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL,		\
+						   ARM_SMCCC_SMC_64,		\
+						   0, ARM_SMCCC_FUNC_MASK)
+
+static void init_smccc_filter(struct kvm *kvm)
+{
+	int r;
+
+	mt_init(&kvm->arch.smccc_filter);
+
+	/*
+	 * Prevent userspace from handling any SMCCC calls in the architecture
+	 * range, avoiding the risk of misrepresenting Spectre mitigation status
+	 * to the guest.
+	 */
+	r = mtree_insert_range(&kvm->arch.smccc_filter,
+			       SMC32_ARCH_RANGE_BEGIN, SMC32_ARCH_RANGE_END,
+			       xa_mk_value(KVM_SMCCC_FILTER_HANDLE),
+			       GFP_KERNEL_ACCOUNT);
+	WARN_ON_ONCE(r);
+
+	r = mtree_insert_range(&kvm->arch.smccc_filter,
+			       SMC64_ARCH_RANGE_BEGIN, SMC64_ARCH_RANGE_END,
+			       xa_mk_value(KVM_SMCCC_FILTER_HANDLE),
+			       GFP_KERNEL_ACCOUNT);
+	WARN_ON_ONCE(r);
+
+}
+
+static int kvm_smccc_set_filter(struct kvm *kvm, struct kvm_smccc_filter __user *uaddr)
+{
+	const void *zero_page = page_to_virt(ZERO_PAGE(0));
+	struct kvm_smccc_filter filter;
+	u32 start, end;
+	int r;
+
+	if (copy_from_user(&filter, uaddr, sizeof(filter)))
+		return -EFAULT;
+
+	if (memcmp(filter.pad, zero_page, sizeof(filter.pad)))
+		return -EINVAL;
+
+	start = filter.base;
+	end = start + filter.nr_functions - 1;
+
+	if (end < start || filter.action >= NR_SMCCC_FILTER_ACTIONS)
+		return -EINVAL;
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (kvm_vm_has_ran_once(kvm)) {
+		r = -EBUSY;
+		goto out_unlock;
+	}
+
+	r = mtree_insert_range(&kvm->arch.smccc_filter, start, end,
+			       xa_mk_value(filter.action), GFP_KERNEL_ACCOUNT);
+	if (r)
+		goto out_unlock;
+
+	set_bit(KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED, &kvm->arch.flags);
+
+out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
+	return r;
+}
+
+static u8 kvm_smccc_filter_get_action(struct kvm *kvm, u32 func_id)
+{
+	unsigned long idx = func_id;
+	void *val;
+
+	if (!test_bit(KVM_ARCH_FLAG_SMCCC_FILTER_CONFIGURED, &kvm->arch.flags))
+		return KVM_SMCCC_FILTER_HANDLE;
+
+	/*
+	 * But where's the error handling, you say?
+	 *
+	 * mt_find() returns NULL if no entry was found, which just so happens
+	 * to match KVM_SMCCC_FILTER_HANDLE.
+	 */
+	val = mt_find(&kvm->arch.smccc_filter, &idx, idx);
+	return xa_to_value(val);
+}
+
+static u8 kvm_smccc_get_action(struct kvm_vcpu *vcpu, u32 func_id)
+{
+	/*
+	 * Intervening actions in the SMCCC filter take precedence over the
+	 * pseudo-firmware register bitmaps.
+	 */
+	u8 action = kvm_smccc_filter_get_action(vcpu->kvm, func_id);
+	if (action != KVM_SMCCC_FILTER_HANDLE)
+		return action;
+
+	if (kvm_smccc_test_fw_bmap(vcpu, func_id) ||
+	    kvm_smccc_default_allowed(func_id))
+		return KVM_SMCCC_FILTER_HANDLE;
+
+	return KVM_SMCCC_FILTER_DENY;
+}
+
+static void kvm_prepare_hypercall_exit(struct kvm_vcpu *vcpu, u32 func_id)
+{
+	u8 ec = ESR_ELx_EC(kvm_vcpu_get_esr(vcpu));
+	struct kvm_run *run = vcpu->run;
+	u64 flags = 0;
+
+	if (ec == ESR_ELx_EC_SMC32 || ec == ESR_ELx_EC_SMC64)
+		flags |= KVM_HYPERCALL_EXIT_SMC;
+
+	if (!kvm_vcpu_trap_il_is32bit(vcpu))
+		flags |= KVM_HYPERCALL_EXIT_16BIT;
+
+	run->exit_reason = KVM_EXIT_HYPERCALL;
+	run->hypercall = (typeof(run->hypercall)) {
+		.nr	= func_id,
+		.flags	= flags,
+	};
+}
+
+int kvm_smccc_call_handler(struct kvm_vcpu *vcpu)
+{
+	struct kvm_smccc_features *smccc_feat = &vcpu->kvm->arch.smccc_feat;
+	u32 func_id = smccc_get_function(vcpu);
+	u64 val[4] = {SMCCC_RET_NOT_SUPPORTED};
+	u32 feature;
+	u8 action;
+	gpa_t gpa;
+
+	action = kvm_smccc_get_action(vcpu, func_id);
+	switch (action) {
+	case KVM_SMCCC_FILTER_HANDLE:
+		break;
+	case KVM_SMCCC_FILTER_DENY:
+		goto out;
+	case KVM_SMCCC_FILTER_FWD_TO_USER:
+		kvm_prepare_hypercall_exit(vcpu, func_id);
+		return 0;
+	default:
+		WARN_RATELIMIT(1, "Unhandled SMCCC filter action: %d\n", action);
+		goto out;
+	}
+
+	switch (func_id) {
+	case ARM_SMCCC_VERSION_FUNC_ID:
+		val[0] = ARM_SMCCC_VERSION_1_1;
+		break;
+	case ARM_SMCCC_ARCH_FEATURES_FUNC_ID:
+		feature = smccc_get_arg1(vcpu);
+		switch (feature) {
+		case ARM_SMCCC_ARCH_WORKAROUND_1:
+			switch (arm64_get_spectre_v2_state()) {
+			case SPECTRE_VULNERABLE:
+				break;
+			case SPECTRE_MITIGATED:
+				val[0] = SMCCC_RET_SUCCESS;
+				break;
+			case SPECTRE_UNAFFECTED:
+				val[0] = SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED;
+				break;
+			}
+			break;
+		case ARM_SMCCC_ARCH_WORKAROUND_2:
+			switch (arm64_get_spectre_v4_state()) {
+			case SPECTRE_VULNERABLE:
+				break;
+			case SPECTRE_MITIGATED:
+				/*
+				 * SSBS everywhere: Indicate no firmware
+				 * support, as the SSBS support will be
+				 * indicated to the guest and the default is
+				 * safe.
+				 *
+				 * Otherwise, expose a permanent mitigation
+				 * to the guest, and hide SSBS so that the
+				 * guest stays protected.
+				 */
+				if (cpus_have_final_cap(ARM64_SSBS))
+					break;
+				fallthrough;
+			case SPECTRE_UNAFFECTED:
+				val[0] = SMCCC_RET_NOT_REQUIRED;
+				break;
+			}
+			break;
+		case ARM_SMCCC_ARCH_WORKAROUND_3:
+			switch (arm64_get_spectre_bhb_state()) {
+			case SPECTRE_VULNERABLE:
+				break;
+			case SPECTRE_MITIGATED:
+				val[0] = SMCCC_RET_SUCCESS;
+				break;
+			case SPECTRE_UNAFFECTED:
+				val[0] = SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED;
+				break;
+			}
+			break;
+		case ARM_SMCCC_HV_PV_TIME_FEATURES:
+			if (test_bit(KVM_REG_ARM_STD_HYP_BIT_PV_TIME,
+				     &smccc_feat->std_hyp_bmap))
+				val[0] = SMCCC_RET_SUCCESS;
+			break;
+		}
+		break;
+	case ARM_SMCCC_HV_PV_TIME_FEATURES:
+		val[0] = kvm_hypercall_pv_features(vcpu);
+		break;
+	case ARM_SMCCC_HV_PV_TIME_ST:
+		gpa = kvm_init_stolen_time(vcpu);
+		if (gpa != INVALID_GPA)
+			val[0] = gpa;
+		break;
+	case ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID:
+		val[0] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_0;
+		val[1] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_1;
+		val[2] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_2;
+		val[3] = ARM_SMCCC_VENDOR_HYP_UID_KVM_REG_3;
+		break;
+	case ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID:
+		val[0] = smccc_feat->vendor_hyp_bmap;
+		break;
+	case ARM_SMCCC_VENDOR_HYP_KVM_PTP_FUNC_ID:
+		kvm_ptp_get_time(vcpu, val);
+		break;
+	case ARM_SMCCC_TRNG_VERSION:
+	case ARM_SMCCC_TRNG_FEATURES:
+	case ARM_SMCCC_TRNG_GET_UUID:
+	case ARM_SMCCC_TRNG_RND32:
+	case ARM_SMCCC_TRNG_RND64:
+		return kvm_trng_call(vcpu);
+	default:
+		return kvm_psci_call(vcpu);
+	}
+
+out:
+	smccc_set_retval(vcpu, val[0], val[1], val[2], val[3]);
+	return 1;
+}
+
+static const u64 kvm_arm_fw_reg_ids[] = {
+	KVM_REG_ARM_PSCI_VERSION,
+	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1,
+	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2,
+	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3,
+	KVM_REG_ARM_STD_BMAP,
+	KVM_REG_ARM_STD_HYP_BMAP,
+	KVM_REG_ARM_VENDOR_HYP_BMAP,
+};
+
+void kvm_arm_init_hypercalls(struct kvm *kvm)
+{
+	struct kvm_smccc_features *smccc_feat = &kvm->arch.smccc_feat;
+
+	smccc_feat->std_bmap = KVM_ARM_SMCCC_STD_FEATURES;
+	smccc_feat->std_hyp_bmap = KVM_ARM_SMCCC_STD_HYP_FEATURES;
+	smccc_feat->vendor_hyp_bmap = KVM_ARM_SMCCC_VENDOR_HYP_FEATURES;
+
+	init_smccc_filter(kvm);
+}
+
+void kvm_arm_teardown_hypercalls(struct kvm *kvm)
+{
+	mtree_destroy(&kvm->arch.smccc_filter);
+}
+
+int kvm_arm_get_fw_num_regs(struct kvm_vcpu *vcpu)
+{
+	return ARRAY_SIZE(kvm_arm_fw_reg_ids);
+}
+
+int kvm_arm_copy_fw_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(kvm_arm_fw_reg_ids); i++) {
+		if (put_user(kvm_arm_fw_reg_ids[i], uindices++))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+#define KVM_REG_FEATURE_LEVEL_MASK	GENMASK(3, 0)
+
+/*
+ * Convert the workaround level into an easy-to-compare number, where higher
+ * values mean better protection.
+ */
+static int get_kernel_wa_level(u64 regid)
+{
+	switch (regid) {
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
+		switch (arm64_get_spectre_v2_state()) {
+		case SPECTRE_VULNERABLE:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL;
+		case SPECTRE_MITIGATED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL;
+		case SPECTRE_UNAFFECTED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED;
+		}
+		return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL;
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
+		switch (arm64_get_spectre_v4_state()) {
+		case SPECTRE_MITIGATED:
+			/*
+			 * As for the hypercall discovery, we pretend we
+			 * don't have any FW mitigation if SSBS is there at
+			 * all times.
+			 */
+			if (cpus_have_final_cap(ARM64_SSBS))
+				return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL;
+			fallthrough;
+		case SPECTRE_UNAFFECTED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED;
+		case SPECTRE_VULNERABLE:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL;
+		}
+		break;
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3:
+		switch (arm64_get_spectre_bhb_state()) {
+		case SPECTRE_VULNERABLE:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL;
+		case SPECTRE_MITIGATED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL;
+		case SPECTRE_UNAFFECTED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED;
+		}
+		return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL;
+	}
+
+	return -EINVAL;
+}
+
+int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	struct kvm_smccc_features *smccc_feat = &vcpu->kvm->arch.smccc_feat;
+	void __user *uaddr = (void __user *)(long)reg->addr;
+	u64 val;
+
+	switch (reg->id) {
+	case KVM_REG_ARM_PSCI_VERSION:
+		val = kvm_psci_version(vcpu);
+		break;
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3:
+		val = get_kernel_wa_level(reg->id) & KVM_REG_FEATURE_LEVEL_MASK;
+		break;
+	case KVM_REG_ARM_STD_BMAP:
+		val = READ_ONCE(smccc_feat->std_bmap);
+		break;
+	case KVM_REG_ARM_STD_HYP_BMAP:
+		val = READ_ONCE(smccc_feat->std_hyp_bmap);
+		break;
+	case KVM_REG_ARM_VENDOR_HYP_BMAP:
+		val = READ_ONCE(smccc_feat->vendor_hyp_bmap);
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	if (copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int kvm_arm_set_fw_reg_bmap(struct kvm_vcpu *vcpu, u64 reg_id, u64 val)
+{
+	int ret = 0;
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_smccc_features *smccc_feat = &kvm->arch.smccc_feat;
+	unsigned long *fw_reg_bmap, fw_reg_features;
+
+	switch (reg_id) {
+	case KVM_REG_ARM_STD_BMAP:
+		fw_reg_bmap = &smccc_feat->std_bmap;
+		fw_reg_features = KVM_ARM_SMCCC_STD_FEATURES;
+		break;
+	case KVM_REG_ARM_STD_HYP_BMAP:
+		fw_reg_bmap = &smccc_feat->std_hyp_bmap;
+		fw_reg_features = KVM_ARM_SMCCC_STD_HYP_FEATURES;
+		break;
+	case KVM_REG_ARM_VENDOR_HYP_BMAP:
+		fw_reg_bmap = &smccc_feat->vendor_hyp_bmap;
+		fw_reg_features = KVM_ARM_SMCCC_VENDOR_HYP_FEATURES;
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	/* Check for unsupported bit */
+	if (val & ~fw_reg_features)
+		return -EINVAL;
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (kvm_vm_has_ran_once(kvm) && val != *fw_reg_bmap) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	WRITE_ONCE(*fw_reg_bmap, val);
+out:
+	mutex_unlock(&kvm->arch.config_lock);
+	return ret;
+}
+
+int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	void __user *uaddr = (void __user *)(long)reg->addr;
+	u64 val;
+	int wa_level;
+
+	if (KVM_REG_SIZE(reg->id) != sizeof(val))
+		return -ENOENT;
+	if (copy_from_user(&val, uaddr, KVM_REG_SIZE(reg->id)))
+		return -EFAULT;
+
+	switch (reg->id) {
+	case KVM_REG_ARM_PSCI_VERSION:
+	{
+		bool wants_02;
+
+		wants_02 = test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features);
+
+		switch (val) {
+		case KVM_ARM_PSCI_0_1:
+			if (wants_02)
+				return -EINVAL;
+			vcpu->kvm->arch.psci_version = val;
+			return 0;
+		case KVM_ARM_PSCI_0_2:
+		case KVM_ARM_PSCI_1_0:
+		case KVM_ARM_PSCI_1_1:
+			if (!wants_02)
+				return -EINVAL;
+			vcpu->kvm->arch.psci_version = val;
+			return 0;
+		}
+		break;
+	}
+
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3:
+		if (val & ~KVM_REG_FEATURE_LEVEL_MASK)
+			return -EINVAL;
+
+		if (get_kernel_wa_level(reg->id) < val)
+			return -EINVAL;
+
+		return 0;
+
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
+		if (val & ~(KVM_REG_FEATURE_LEVEL_MASK |
+			    KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED))
+			return -EINVAL;
+
+		/* The enabled bit must not be set unless the level is AVAIL. */
+		if ((val & KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED) &&
+		    (val & KVM_REG_FEATURE_LEVEL_MASK) != KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL)
+			return -EINVAL;
+
+		/*
+		 * Map all the possible incoming states to the only two we
+		 * really want to deal with.
+		 */
+		switch (val & KVM_REG_FEATURE_LEVEL_MASK) {
+		case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL:
+		case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN:
+			wa_level = KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL;
+			break;
+		case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL:
+		case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
+			wa_level = KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/*
+		 * We can deal with NOT_AVAIL on NOT_REQUIRED, but not the
+		 * other way around.
+		 */
+		if (get_kernel_wa_level(reg->id) < wa_level)
+			return -EINVAL;
+
+		return 0;
+	case KVM_REG_ARM_STD_BMAP:
+	case KVM_REG_ARM_STD_HYP_BMAP:
+	case KVM_REG_ARM_VENDOR_HYP_BMAP:
+		return kvm_arm_set_fw_reg_bmap(vcpu, reg->id, val);
+	default:
+		return -ENOENT;
+	}
+
+	return -EINVAL;
+}
+
+int kvm_vm_smccc_has_attr(struct kvm *kvm, struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case KVM_ARM_VM_SMCCC_FILTER:
+		return 0;
+	default:
+		return -ENXIO;
+	}
+}
+
+int kvm_vm_smccc_set_attr(struct kvm *kvm, struct kvm_device_attr *attr)
+{
+	void __user *uaddr = (void __user *)attr->addr;
+
+	switch (attr->attr) {
+	case KVM_ARM_VM_SMCCC_FILTER:
+		return kvm_smccc_set_filter(kvm, uaddr);
+	default:
+		return -ENXIO;
+	}
+}
diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
new file mode 100644
index 000000000..0bd93a5f2
--- /dev/null
+++ b/arch/arm64/kvm/inject_fault.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Fault injection for both 32 and 64bit guests.
+ *
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Based on arch/arm/kvm/emulate.c
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_nested.h>
+#include <asm/esr.h>
+
+static void pend_sync_exception(struct kvm_vcpu *vcpu)
+{
+	/* If not nesting, EL1 is the only possible exception target */
+	if (likely(!vcpu_has_nv(vcpu))) {
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
+		return;
+	}
+
+	/*
+	 * With NV, we need to pick between EL1 and EL2. Note that we
+	 * never deal with a nesting exception here, hence never
+	 * changing context, and the exception itself can be delayed
+	 * until the next entry.
+	 */
+	switch(*vcpu_cpsr(vcpu) & PSR_MODE_MASK) {
+	case PSR_MODE_EL2h:
+	case PSR_MODE_EL2t:
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SYNC);
+		break;
+	case PSR_MODE_EL1h:
+	case PSR_MODE_EL1t:
+		kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
+		break;
+	case PSR_MODE_EL0t:
+		if (vcpu_el2_tge_is_set(vcpu))
+			kvm_pend_exception(vcpu, EXCEPT_AA64_EL2_SYNC);
+		else
+			kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
+		break;
+	default:
+		BUG();
+	}
+}
+
+static bool match_target_el(struct kvm_vcpu *vcpu, unsigned long target)
+{
+	return (vcpu_get_flag(vcpu, EXCEPT_MASK) == target);
+}
+
+static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
+{
+	unsigned long cpsr = *vcpu_cpsr(vcpu);
+	bool is_aarch32 = vcpu_mode_is_32bit(vcpu);
+	u64 esr = 0;
+
+	pend_sync_exception(vcpu);
+
+	/*
+	 * Build an {i,d}abort, depending on the level and the
+	 * instruction set. Report an external synchronous abort.
+	 */
+	if (kvm_vcpu_trap_il_is32bit(vcpu))
+		esr |= ESR_ELx_IL;
+
+	/*
+	 * Here, the guest runs in AArch64 mode when in EL1. If we get
+	 * an AArch32 fault, it means we managed to trap an EL0 fault.
+	 */
+	if (is_aarch32 || (cpsr & PSR_MODE_MASK) == PSR_MODE_EL0t)
+		esr |= (ESR_ELx_EC_IABT_LOW << ESR_ELx_EC_SHIFT);
+	else
+		esr |= (ESR_ELx_EC_IABT_CUR << ESR_ELx_EC_SHIFT);
+
+	if (!is_iabt)
+		esr |= ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT;
+
+	esr |= ESR_ELx_FSC_EXTABT;
+
+	if (match_target_el(vcpu, unpack_vcpu_flag(EXCEPT_AA64_EL1_SYNC))) {
+		vcpu_write_sys_reg(vcpu, addr, FAR_EL1);
+		vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
+	} else {
+		vcpu_write_sys_reg(vcpu, addr, FAR_EL2);
+		vcpu_write_sys_reg(vcpu, esr, ESR_EL2);
+	}
+}
+
+static void inject_undef64(struct kvm_vcpu *vcpu)
+{
+	u64 esr = (ESR_ELx_EC_UNKNOWN << ESR_ELx_EC_SHIFT);
+
+	pend_sync_exception(vcpu);
+
+	/*
+	 * Build an unknown exception, depending on the instruction
+	 * set.
+	 */
+	if (kvm_vcpu_trap_il_is32bit(vcpu))
+		esr |= ESR_ELx_IL;
+
+	if (match_target_el(vcpu, unpack_vcpu_flag(EXCEPT_AA64_EL1_SYNC)))
+		vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
+	else
+		vcpu_write_sys_reg(vcpu, esr, ESR_EL2);
+}
+
+#define DFSR_FSC_EXTABT_LPAE	0x10
+#define DFSR_FSC_EXTABT_nLPAE	0x08
+#define DFSR_LPAE		BIT(9)
+#define TTBCR_EAE		BIT(31)
+
+static void inject_undef32(struct kvm_vcpu *vcpu)
+{
+	kvm_pend_exception(vcpu, EXCEPT_AA32_UND);
+}
+
+/*
+ * Modelled after TakeDataAbortException() and TakePrefetchAbortException
+ * pseudocode.
+ */
+static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, u32 addr)
+{
+	u64 far;
+	u32 fsr;
+
+	/* Give the guest an IMPLEMENTATION DEFINED exception */
+	if (vcpu_read_sys_reg(vcpu, TCR_EL1) & TTBCR_EAE) {
+		fsr = DFSR_LPAE | DFSR_FSC_EXTABT_LPAE;
+	} else {
+		/* no need to shuffle FS[4] into DFSR[10] as its 0 */
+		fsr = DFSR_FSC_EXTABT_nLPAE;
+	}
+
+	far = vcpu_read_sys_reg(vcpu, FAR_EL1);
+
+	if (is_pabt) {
+		kvm_pend_exception(vcpu, EXCEPT_AA32_IABT);
+		far &= GENMASK(31, 0);
+		far |= (u64)addr << 32;
+		vcpu_write_sys_reg(vcpu, fsr, IFSR32_EL2);
+	} else { /* !iabt */
+		kvm_pend_exception(vcpu, EXCEPT_AA32_DABT);
+		far &= GENMASK(63, 32);
+		far |= addr;
+		vcpu_write_sys_reg(vcpu, fsr, ESR_EL1);
+	}
+
+	vcpu_write_sys_reg(vcpu, far, FAR_EL1);
+}
+
+/**
+ * kvm_inject_dabt - inject a data abort into the guest
+ * @vcpu: The VCPU to receive the data abort
+ * @addr: The address to report in the DFAR
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr)
+{
+	if (vcpu_el1_is_32bit(vcpu))
+		inject_abt32(vcpu, false, addr);
+	else
+		inject_abt64(vcpu, false, addr);
+}
+
+/**
+ * kvm_inject_pabt - inject a prefetch abort into the guest
+ * @vcpu: The VCPU to receive the prefetch abort
+ * @addr: The address to report in the DFAR
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr)
+{
+	if (vcpu_el1_is_32bit(vcpu))
+		inject_abt32(vcpu, true, addr);
+	else
+		inject_abt64(vcpu, true, addr);
+}
+
+void kvm_inject_size_fault(struct kvm_vcpu *vcpu)
+{
+	unsigned long addr, esr;
+
+	addr  = kvm_vcpu_get_fault_ipa(vcpu);
+	addr |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
+
+	if (kvm_vcpu_trap_is_iabt(vcpu))
+		kvm_inject_pabt(vcpu, addr);
+	else
+		kvm_inject_dabt(vcpu, addr);
+
+	/*
+	 * If AArch64 or LPAE, set FSC to 0 to indicate an Address
+	 * Size Fault at level 0, as if exceeding PARange.
+	 *
+	 * Non-LPAE guests will only get the external abort, as there
+	 * is no way to describe the ASF.
+	 */
+	if (vcpu_el1_is_32bit(vcpu) &&
+	    !(vcpu_read_sys_reg(vcpu, TCR_EL1) & TTBCR_EAE))
+		return;
+
+	esr = vcpu_read_sys_reg(vcpu, ESR_EL1);
+	esr &= ~GENMASK_ULL(5, 0);
+	vcpu_write_sys_reg(vcpu, esr, ESR_EL1);
+}
+
+/**
+ * kvm_inject_undefined - inject an undefined instruction into the guest
+ * @vcpu: The vCPU in which to inject the exception
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ */
+void kvm_inject_undefined(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_el1_is_32bit(vcpu))
+		inject_undef32(vcpu);
+	else
+		inject_undef64(vcpu);
+}
+
+void kvm_set_sei_esr(struct kvm_vcpu *vcpu, u64 esr)
+{
+	vcpu_set_vsesr(vcpu, esr & ESR_ELx_ISS_MASK);
+	*vcpu_hcr(vcpu) |= HCR_VSE;
+}
+
+/**
+ * kvm_inject_vabt - inject an async abort / SError into the guest
+ * @vcpu: The VCPU to receive the exception
+ *
+ * It is assumed that this code is called from the VCPU thread and that the
+ * VCPU therefore is not currently executing guest code.
+ *
+ * Systems with the RAS Extensions specify an imp-def ESR (ISV/IDS = 1) with
+ * the remaining ISS all-zeros so that this error is not interpreted as an
+ * uncategorized RAS error. Without the RAS Extensions we can't specify an ESR
+ * value, so the CPU generates an imp-def value.
+ */
+void kvm_inject_vabt(struct kvm_vcpu *vcpu)
+{
+	kvm_set_sei_esr(vcpu, ESR_ELx_ISV);
+}
diff --git a/arch/arm64/kvm/mmio.c b/arch/arm64/kvm/mmio.c
new file mode 100644
index 000000000..3dd38a151
--- /dev/null
+++ b/arch/arm64/kvm/mmio.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include <trace/events/kvm.h>
+
+#include "trace.h"
+
+void kvm_mmio_write_buf(void *buf, unsigned int len, unsigned long data)
+{
+	void *datap = NULL;
+	union {
+		u8	byte;
+		u16	hword;
+		u32	word;
+		u64	dword;
+	} tmp;
+
+	switch (len) {
+	case 1:
+		tmp.byte	= data;
+		datap		= &tmp.byte;
+		break;
+	case 2:
+		tmp.hword	= data;
+		datap		= &tmp.hword;
+		break;
+	case 4:
+		tmp.word	= data;
+		datap		= &tmp.word;
+		break;
+	case 8:
+		tmp.dword	= data;
+		datap		= &tmp.dword;
+		break;
+	}
+
+	memcpy(buf, datap, len);
+}
+
+unsigned long kvm_mmio_read_buf(const void *buf, unsigned int len)
+{
+	unsigned long data = 0;
+	union {
+		u16	hword;
+		u32	word;
+		u64	dword;
+	} tmp;
+
+	switch (len) {
+	case 1:
+		data = *(u8 *)buf;
+		break;
+	case 2:
+		memcpy(&tmp.hword, buf, len);
+		data = tmp.hword;
+		break;
+	case 4:
+		memcpy(&tmp.word, buf, len);
+		data = tmp.word;
+		break;
+	case 8:
+		memcpy(&tmp.dword, buf, len);
+		data = tmp.dword;
+		break;
+	}
+
+	return data;
+}
+
+/**
+ * kvm_handle_mmio_return -- Handle MMIO loads after user space emulation
+ *			     or in-kernel IO emulation
+ *
+ * @vcpu: The VCPU pointer
+ */
+int kvm_handle_mmio_return(struct kvm_vcpu *vcpu)
+{
+	unsigned long data;
+	unsigned int len;
+	int mask;
+
+	/* Detect an already handled MMIO return */
+	if (unlikely(!vcpu->mmio_needed))
+		return 0;
+
+	vcpu->mmio_needed = 0;
+
+	if (!kvm_vcpu_dabt_iswrite(vcpu)) {
+		struct kvm_run *run = vcpu->run;
+
+		len = kvm_vcpu_dabt_get_as(vcpu);
+		data = kvm_mmio_read_buf(run->mmio.data, len);
+
+		if (kvm_vcpu_dabt_issext(vcpu) &&
+		    len < sizeof(unsigned long)) {
+			mask = 1U << ((len * 8) - 1);
+			data = (data ^ mask) - mask;
+		}
+
+		if (!kvm_vcpu_dabt_issf(vcpu))
+			data = data & 0xffffffff;
+
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
+			       &data);
+		data = vcpu_data_host_to_guest(vcpu, data, len);
+		vcpu_set_reg(vcpu, kvm_vcpu_dabt_get_rd(vcpu), data);
+	}
+
+	/*
+	 * The MMIO instruction is emulated and should not be re-executed
+	 * in the guest.
+	 */
+	kvm_incr_pc(vcpu);
+
+	return 0;
+}
+
+int io_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
+{
+	struct kvm_run *run = vcpu->run;
+	unsigned long data;
+	unsigned long rt;
+	int ret;
+	bool is_write;
+	int len;
+	u8 data_buf[8];
+
+	/*
+	 * No valid syndrome? Ask userspace for help if it has
+	 * volunteered to do so, and bail out otherwise.
+	 */
+	if (!kvm_vcpu_dabt_isvalid(vcpu)) {
+		if (test_bit(KVM_ARCH_FLAG_RETURN_NISV_IO_ABORT_TO_USER,
+			     &vcpu->kvm->arch.flags)) {
+			run->exit_reason = KVM_EXIT_ARM_NISV;
+			run->arm_nisv.esr_iss = kvm_vcpu_dabt_iss_nisv_sanitized(vcpu);
+			run->arm_nisv.fault_ipa = fault_ipa;
+			return 0;
+		}
+
+		kvm_pr_unimpl("Data abort outside memslots with no valid syndrome info\n");
+		return -ENOSYS;
+	}
+
+	/*
+	 * Prepare MMIO operation. First decode the syndrome data we get
+	 * from the CPU. Then try if some in-kernel emulation feels
+	 * responsible, otherwise let user space do its magic.
+	 */
+	is_write = kvm_vcpu_dabt_iswrite(vcpu);
+	len = kvm_vcpu_dabt_get_as(vcpu);
+	rt = kvm_vcpu_dabt_get_rd(vcpu);
+
+	if (is_write) {
+		data = vcpu_data_guest_to_host(vcpu, vcpu_get_reg(vcpu, rt),
+					       len);
+
+		trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, &data);
+		kvm_mmio_write_buf(data_buf, len, data);
+
+		ret = kvm_io_bus_write(vcpu, KVM_MMIO_BUS, fault_ipa, len,
+				       data_buf);
+	} else {
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, len,
+			       fault_ipa, NULL);
+
+		ret = kvm_io_bus_read(vcpu, KVM_MMIO_BUS, fault_ipa, len,
+				      data_buf);
+	}
+
+	/* Now prepare kvm_run for the potential return to userland. */
+	run->mmio.is_write	= is_write;
+	run->mmio.phys_addr	= fault_ipa;
+	run->mmio.len		= len;
+	vcpu->mmio_needed	= 1;
+
+	if (!ret) {
+		/* We handled the access successfully in the kernel. */
+		if (!is_write)
+			memcpy(run->mmio.data, data_buf, len);
+		vcpu->stat.mmio_exit_kernel++;
+		kvm_handle_mmio_return(vcpu);
+		return 1;
+	}
+
+	if (is_write)
+		memcpy(run->mmio.data, data_buf, len);
+	vcpu->stat.mmio_exit_user++;
+	run->exit_reason	= KVM_EXIT_MMIO;
+	return 0;
+}
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
new file mode 100644
index 000000000..482280fe2
--- /dev/null
+++ b/arch/arm64/kvm/mmu.c
@@ -0,0 +1,2158 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/mman.h>
+#include <linux/kvm_host.h>
+#include <linux/io.h>
+#include <linux/hugetlb.h>
+#include <linux/sched/signal.h>
+#include <trace/events/kvm.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_pgtable.h>
+#include <asm/kvm_ras.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/virt.h>
+
+#include "trace.h"
+
+static struct kvm_pgtable *hyp_pgtable;
+static DEFINE_MUTEX(kvm_hyp_pgd_mutex);
+
+static unsigned long __ro_after_init hyp_idmap_start;
+static unsigned long __ro_after_init hyp_idmap_end;
+static phys_addr_t __ro_after_init hyp_idmap_vector;
+
+static unsigned long __ro_after_init io_map_base;
+
+static phys_addr_t __stage2_range_addr_end(phys_addr_t addr, phys_addr_t end,
+					   phys_addr_t size)
+{
+	phys_addr_t boundary = ALIGN_DOWN(addr + size, size);
+
+	return (boundary - 1 < end - 1) ? boundary : end;
+}
+
+static phys_addr_t stage2_range_addr_end(phys_addr_t addr, phys_addr_t end)
+{
+	phys_addr_t size = kvm_granule_size(KVM_PGTABLE_MIN_BLOCK_LEVEL);
+
+	return __stage2_range_addr_end(addr, end, size);
+}
+
+/*
+ * Release kvm_mmu_lock periodically if the memory region is large. Otherwise,
+ * we may see kernel panics with CONFIG_DETECT_HUNG_TASK,
+ * CONFIG_LOCKUP_DETECTOR, CONFIG_LOCKDEP. Additionally, holding the lock too
+ * long will also starve other vCPUs. We have to also make sure that the page
+ * tables are not freed while we released the lock.
+ */
+static int stage2_apply_range(struct kvm_s2_mmu *mmu, phys_addr_t addr,
+			      phys_addr_t end,
+			      int (*fn)(struct kvm_pgtable *, u64, u64),
+			      bool resched)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(mmu);
+	int ret;
+	u64 next;
+
+	do {
+		struct kvm_pgtable *pgt = mmu->pgt;
+		if (!pgt)
+			return -EINVAL;
+
+		next = stage2_range_addr_end(addr, end);
+		ret = fn(pgt, addr, next - addr);
+		if (ret)
+			break;
+
+		if (resched && next != end)
+			cond_resched_rwlock_write(&kvm->mmu_lock);
+	} while (addr = next, addr != end);
+
+	return ret;
+}
+
+#define stage2_apply_range_resched(mmu, addr, end, fn)			\
+	stage2_apply_range(mmu, addr, end, fn, true)
+
+/*
+ * Get the maximum number of page-tables pages needed to split a range
+ * of blocks into PAGE_SIZE PTEs. It assumes the range is already
+ * mapped at level 2, or at level 1 if allowed.
+ */
+static int kvm_mmu_split_nr_page_tables(u64 range)
+{
+	int n = 0;
+
+	if (KVM_PGTABLE_MIN_BLOCK_LEVEL < 2)
+		n += DIV_ROUND_UP(range, PUD_SIZE);
+	n += DIV_ROUND_UP(range, PMD_SIZE);
+	return n;
+}
+
+static bool need_split_memcache_topup_or_resched(struct kvm *kvm)
+{
+	struct kvm_mmu_memory_cache *cache;
+	u64 chunk_size, min;
+
+	if (need_resched() || rwlock_needbreak(&kvm->mmu_lock))
+		return true;
+
+	chunk_size = kvm->arch.mmu.split_page_chunk_size;
+	min = kvm_mmu_split_nr_page_tables(chunk_size);
+	cache = &kvm->arch.mmu.split_page_cache;
+	return kvm_mmu_memory_cache_nr_free_objects(cache) < min;
+}
+
+static int kvm_mmu_split_huge_pages(struct kvm *kvm, phys_addr_t addr,
+				    phys_addr_t end)
+{
+	struct kvm_mmu_memory_cache *cache;
+	struct kvm_pgtable *pgt;
+	int ret, cache_capacity;
+	u64 next, chunk_size;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	chunk_size = kvm->arch.mmu.split_page_chunk_size;
+	cache_capacity = kvm_mmu_split_nr_page_tables(chunk_size);
+
+	if (chunk_size == 0)
+		return 0;
+
+	cache = &kvm->arch.mmu.split_page_cache;
+
+	do {
+		if (need_split_memcache_topup_or_resched(kvm)) {
+			write_unlock(&kvm->mmu_lock);
+			cond_resched();
+			/* Eager page splitting is best-effort. */
+			ret = __kvm_mmu_topup_memory_cache(cache,
+							   cache_capacity,
+							   cache_capacity);
+			write_lock(&kvm->mmu_lock);
+			if (ret)
+				break;
+		}
+
+		pgt = kvm->arch.mmu.pgt;
+		if (!pgt)
+			return -EINVAL;
+
+		next = __stage2_range_addr_end(addr, end, chunk_size);
+		ret = kvm_pgtable_stage2_split(pgt, addr, next - addr, cache);
+		if (ret)
+			break;
+	} while (addr = next, addr != end);
+
+	return ret;
+}
+
+static bool memslot_is_logging(struct kvm_memory_slot *memslot)
+{
+	return memslot->dirty_bitmap && !(memslot->flags & KVM_MEM_READONLY);
+}
+
+/**
+ * kvm_arch_flush_remote_tlbs() - flush all VM TLB entries for v7/8
+ * @kvm:	pointer to kvm structure.
+ *
+ * Interface to HYP function to flush all VM TLB entries
+ */
+int kvm_arch_flush_remote_tlbs(struct kvm *kvm)
+{
+	kvm_call_hyp(__kvm_tlb_flush_vmid, &kvm->arch.mmu);
+	return 0;
+}
+
+int kvm_arch_flush_remote_tlbs_range(struct kvm *kvm,
+				      gfn_t gfn, u64 nr_pages)
+{
+	kvm_tlb_flush_vmid_range(&kvm->arch.mmu,
+				gfn << PAGE_SHIFT, nr_pages << PAGE_SHIFT);
+	return 0;
+}
+
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+	return !pfn_is_map_memory(pfn);
+}
+
+static void *stage2_memcache_zalloc_page(void *arg)
+{
+	struct kvm_mmu_memory_cache *mc = arg;
+	void *virt;
+
+	/* Allocated with __GFP_ZERO, so no need to zero */
+	virt = kvm_mmu_memory_cache_alloc(mc);
+	if (virt)
+		kvm_account_pgtable_pages(virt, 1);
+	return virt;
+}
+
+static void *kvm_host_zalloc_pages_exact(size_t size)
+{
+	return alloc_pages_exact(size, GFP_KERNEL_ACCOUNT | __GFP_ZERO);
+}
+
+static void *kvm_s2_zalloc_pages_exact(size_t size)
+{
+	void *virt = kvm_host_zalloc_pages_exact(size);
+
+	if (virt)
+		kvm_account_pgtable_pages(virt, (size >> PAGE_SHIFT));
+	return virt;
+}
+
+static void kvm_s2_free_pages_exact(void *virt, size_t size)
+{
+	kvm_account_pgtable_pages(virt, -(size >> PAGE_SHIFT));
+	free_pages_exact(virt, size);
+}
+
+static struct kvm_pgtable_mm_ops kvm_s2_mm_ops;
+
+static void stage2_free_unlinked_table_rcu_cb(struct rcu_head *head)
+{
+	struct page *page = container_of(head, struct page, rcu_head);
+	void *pgtable = page_to_virt(page);
+	u32 level = page_private(page);
+
+	kvm_pgtable_stage2_free_unlinked(&kvm_s2_mm_ops, pgtable, level);
+}
+
+static void stage2_free_unlinked_table(void *addr, u32 level)
+{
+	struct page *page = virt_to_page(addr);
+
+	set_page_private(page, (unsigned long)level);
+	call_rcu(&page->rcu_head, stage2_free_unlinked_table_rcu_cb);
+}
+
+static void kvm_host_get_page(void *addr)
+{
+	get_page(virt_to_page(addr));
+}
+
+static void kvm_host_put_page(void *addr)
+{
+	put_page(virt_to_page(addr));
+}
+
+static void kvm_s2_put_page(void *addr)
+{
+	struct page *p = virt_to_page(addr);
+	/* Dropping last refcount, the page will be freed */
+	if (page_count(p) == 1)
+		kvm_account_pgtable_pages(addr, -1);
+	put_page(p);
+}
+
+static int kvm_host_page_count(void *addr)
+{
+	return page_count(virt_to_page(addr));
+}
+
+static phys_addr_t kvm_host_pa(void *addr)
+{
+	return __pa(addr);
+}
+
+static void *kvm_host_va(phys_addr_t phys)
+{
+	return __va(phys);
+}
+
+static void clean_dcache_guest_page(void *va, size_t size)
+{
+	__clean_dcache_guest_page(va, size);
+}
+
+static void invalidate_icache_guest_page(void *va, size_t size)
+{
+	__invalidate_icache_guest_page(va, size);
+}
+
+/*
+ * Unmapping vs dcache management:
+ *
+ * If a guest maps certain memory pages as uncached, all writes will
+ * bypass the data cache and go directly to RAM.  However, the CPUs
+ * can still speculate reads (not writes) and fill cache lines with
+ * data.
+ *
+ * Those cache lines will be *clean* cache lines though, so a
+ * clean+invalidate operation is equivalent to an invalidate
+ * operation, because no cache lines are marked dirty.
+ *
+ * Those clean cache lines could be filled prior to an uncached write
+ * by the guest, and the cache coherent IO subsystem would therefore
+ * end up writing old data to disk.
+ *
+ * This is why right after unmapping a page/section and invalidating
+ * the corresponding TLBs, we flush to make sure the IO subsystem will
+ * never hit in the cache.
+ *
+ * This is all avoided on systems that have ARM64_HAS_STAGE2_FWB, as
+ * we then fully enforce cacheability of RAM, no matter what the guest
+ * does.
+ */
+/**
+ * unmap_stage2_range -- Clear stage2 page table entries to unmap a range
+ * @mmu:   The KVM stage-2 MMU pointer
+ * @start: The intermediate physical base address of the range to unmap
+ * @size:  The size of the area to unmap
+ * @may_block: Whether or not we are permitted to block
+ *
+ * Clear a range of stage-2 mappings, lowering the various ref-counts.  Must
+ * be called while holding mmu_lock (unless for freeing the stage2 pgd before
+ * destroying the VM), otherwise another faulting VCPU may come in and mess
+ * with things behind our backs.
+ */
+static void __unmap_stage2_range(struct kvm_s2_mmu *mmu, phys_addr_t start, u64 size,
+				 bool may_block)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(mmu);
+	phys_addr_t end = start + size;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+	WARN_ON(size & ~PAGE_MASK);
+	WARN_ON(stage2_apply_range(mmu, start, end, kvm_pgtable_stage2_unmap,
+				   may_block));
+}
+
+static void unmap_stage2_range(struct kvm_s2_mmu *mmu, phys_addr_t start, u64 size)
+{
+	__unmap_stage2_range(mmu, start, size, true);
+}
+
+static void stage2_flush_memslot(struct kvm *kvm,
+				 struct kvm_memory_slot *memslot)
+{
+	phys_addr_t addr = memslot->base_gfn << PAGE_SHIFT;
+	phys_addr_t end = addr + PAGE_SIZE * memslot->npages;
+
+	stage2_apply_range_resched(&kvm->arch.mmu, addr, end, kvm_pgtable_stage2_flush);
+}
+
+/**
+ * stage2_flush_vm - Invalidate cache for pages mapped in stage 2
+ * @kvm: The struct kvm pointer
+ *
+ * Go through the stage 2 page tables and invalidate any cache lines
+ * backing memory already mapped to the VM.
+ */
+static void stage2_flush_vm(struct kvm *kvm)
+{
+	struct kvm_memslots *slots;
+	struct kvm_memory_slot *memslot;
+	int idx, bkt;
+
+	idx = srcu_read_lock(&kvm->srcu);
+	write_lock(&kvm->mmu_lock);
+
+	slots = kvm_memslots(kvm);
+	kvm_for_each_memslot(memslot, bkt, slots)
+		stage2_flush_memslot(kvm, memslot);
+
+	write_unlock(&kvm->mmu_lock);
+	srcu_read_unlock(&kvm->srcu, idx);
+}
+
+/**
+ * free_hyp_pgds - free Hyp-mode page tables
+ */
+void __init free_hyp_pgds(void)
+{
+	mutex_lock(&kvm_hyp_pgd_mutex);
+	if (hyp_pgtable) {
+		kvm_pgtable_hyp_destroy(hyp_pgtable);
+		kfree(hyp_pgtable);
+		hyp_pgtable = NULL;
+	}
+	mutex_unlock(&kvm_hyp_pgd_mutex);
+}
+
+static bool kvm_host_owns_hyp_mappings(void)
+{
+	if (is_kernel_in_hyp_mode())
+		return false;
+
+	if (static_branch_likely(&kvm_protected_mode_initialized))
+		return false;
+
+	/*
+	 * This can happen at boot time when __create_hyp_mappings() is called
+	 * after the hyp protection has been enabled, but the static key has
+	 * not been flipped yet.
+	 */
+	if (!hyp_pgtable && is_protected_kvm_enabled())
+		return false;
+
+	WARN_ON(!hyp_pgtable);
+
+	return true;
+}
+
+int __create_hyp_mappings(unsigned long start, unsigned long size,
+			  unsigned long phys, enum kvm_pgtable_prot prot)
+{
+	int err;
+
+	if (WARN_ON(!kvm_host_owns_hyp_mappings()))
+		return -EINVAL;
+
+	mutex_lock(&kvm_hyp_pgd_mutex);
+	err = kvm_pgtable_hyp_map(hyp_pgtable, start, size, phys, prot);
+	mutex_unlock(&kvm_hyp_pgd_mutex);
+
+	return err;
+}
+
+static phys_addr_t kvm_kaddr_to_phys(void *kaddr)
+{
+	if (!is_vmalloc_addr(kaddr)) {
+		BUG_ON(!virt_addr_valid(kaddr));
+		return __pa(kaddr);
+	} else {
+		return page_to_phys(vmalloc_to_page(kaddr)) +
+		       offset_in_page(kaddr);
+	}
+}
+
+struct hyp_shared_pfn {
+	u64 pfn;
+	int count;
+	struct rb_node node;
+};
+
+static DEFINE_MUTEX(hyp_shared_pfns_lock);
+static struct rb_root hyp_shared_pfns = RB_ROOT;
+
+static struct hyp_shared_pfn *find_shared_pfn(u64 pfn, struct rb_node ***node,
+					      struct rb_node **parent)
+{
+	struct hyp_shared_pfn *this;
+
+	*node = &hyp_shared_pfns.rb_node;
+	*parent = NULL;
+	while (**node) {
+		this = container_of(**node, struct hyp_shared_pfn, node);
+		*parent = **node;
+		if (this->pfn < pfn)
+			*node = &((**node)->rb_left);
+		else if (this->pfn > pfn)
+			*node = &((**node)->rb_right);
+		else
+			return this;
+	}
+
+	return NULL;
+}
+
+static int share_pfn_hyp(u64 pfn)
+{
+	struct rb_node **node, *parent;
+	struct hyp_shared_pfn *this;
+	int ret = 0;
+
+	mutex_lock(&hyp_shared_pfns_lock);
+	this = find_shared_pfn(pfn, &node, &parent);
+	if (this) {
+		this->count++;
+		goto unlock;
+	}
+
+	this = kzalloc(sizeof(*this), GFP_KERNEL);
+	if (!this) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	this->pfn = pfn;
+	this->count = 1;
+	rb_link_node(&this->node, parent, node);
+	rb_insert_color(&this->node, &hyp_shared_pfns);
+	ret = kvm_call_hyp_nvhe(__pkvm_host_share_hyp, pfn, 1);
+unlock:
+	mutex_unlock(&hyp_shared_pfns_lock);
+
+	return ret;
+}
+
+static int unshare_pfn_hyp(u64 pfn)
+{
+	struct rb_node **node, *parent;
+	struct hyp_shared_pfn *this;
+	int ret = 0;
+
+	mutex_lock(&hyp_shared_pfns_lock);
+	this = find_shared_pfn(pfn, &node, &parent);
+	if (WARN_ON(!this)) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	this->count--;
+	if (this->count)
+		goto unlock;
+
+	rb_erase(&this->node, &hyp_shared_pfns);
+	kfree(this);
+	ret = kvm_call_hyp_nvhe(__pkvm_host_unshare_hyp, pfn, 1);
+unlock:
+	mutex_unlock(&hyp_shared_pfns_lock);
+
+	return ret;
+}
+
+int kvm_share_hyp(void *from, void *to)
+{
+	phys_addr_t start, end, cur;
+	u64 pfn;
+	int ret;
+
+	if (is_kernel_in_hyp_mode())
+		return 0;
+
+	/*
+	 * The share hcall maps things in the 'fixed-offset' region of the hyp
+	 * VA space, so we can only share physically contiguous data-structures
+	 * for now.
+	 */
+	if (is_vmalloc_or_module_addr(from) || is_vmalloc_or_module_addr(to))
+		return -EINVAL;
+
+	if (kvm_host_owns_hyp_mappings())
+		return create_hyp_mappings(from, to, PAGE_HYP);
+
+	start = ALIGN_DOWN(__pa(from), PAGE_SIZE);
+	end = PAGE_ALIGN(__pa(to));
+	for (cur = start; cur < end; cur += PAGE_SIZE) {
+		pfn = __phys_to_pfn(cur);
+		ret = share_pfn_hyp(pfn);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+void kvm_unshare_hyp(void *from, void *to)
+{
+	phys_addr_t start, end, cur;
+	u64 pfn;
+
+	if (is_kernel_in_hyp_mode() || kvm_host_owns_hyp_mappings() || !from)
+		return;
+
+	start = ALIGN_DOWN(__pa(from), PAGE_SIZE);
+	end = PAGE_ALIGN(__pa(to));
+	for (cur = start; cur < end; cur += PAGE_SIZE) {
+		pfn = __phys_to_pfn(cur);
+		WARN_ON(unshare_pfn_hyp(pfn));
+	}
+}
+
+/**
+ * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode
+ * @from:	The virtual kernel start address of the range
+ * @to:		The virtual kernel end address of the range (exclusive)
+ * @prot:	The protection to be applied to this range
+ *
+ * The same virtual address as the kernel virtual address is also used
+ * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying
+ * physical pages.
+ */
+int create_hyp_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
+{
+	phys_addr_t phys_addr;
+	unsigned long virt_addr;
+	unsigned long start = kern_hyp_va((unsigned long)from);
+	unsigned long end = kern_hyp_va((unsigned long)to);
+
+	if (is_kernel_in_hyp_mode())
+		return 0;
+
+	if (!kvm_host_owns_hyp_mappings())
+		return -EPERM;
+
+	start = start & PAGE_MASK;
+	end = PAGE_ALIGN(end);
+
+	for (virt_addr = start; virt_addr < end; virt_addr += PAGE_SIZE) {
+		int err;
+
+		phys_addr = kvm_kaddr_to_phys(from + virt_addr - start);
+		err = __create_hyp_mappings(virt_addr, PAGE_SIZE, phys_addr,
+					    prot);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int __hyp_alloc_private_va_range(unsigned long base)
+{
+	lockdep_assert_held(&kvm_hyp_pgd_mutex);
+
+	if (!PAGE_ALIGNED(base))
+		return -EINVAL;
+
+	/*
+	 * Verify that BIT(VA_BITS - 1) hasn't been flipped by
+	 * allocating the new area, as it would indicate we've
+	 * overflowed the idmap/IO address range.
+	 */
+	if ((base ^ io_map_base) & BIT(VA_BITS - 1))
+		return -ENOMEM;
+
+	io_map_base = base;
+
+	return 0;
+}
+
+/**
+ * hyp_alloc_private_va_range - Allocates a private VA range.
+ * @size:	The size of the VA range to reserve.
+ * @haddr:	The hypervisor virtual start address of the allocation.
+ *
+ * The private virtual address (VA) range is allocated below io_map_base
+ * and aligned based on the order of @size.
+ *
+ * Return: 0 on success or negative error code on failure.
+ */
+int hyp_alloc_private_va_range(size_t size, unsigned long *haddr)
+{
+	unsigned long base;
+	int ret = 0;
+
+	mutex_lock(&kvm_hyp_pgd_mutex);
+
+	/*
+	 * This assumes that we have enough space below the idmap
+	 * page to allocate our VAs. If not, the check in
+	 * __hyp_alloc_private_va_range() will kick. A potential
+	 * alternative would be to detect that overflow and switch
+	 * to an allocation above the idmap.
+	 *
+	 * The allocated size is always a multiple of PAGE_SIZE.
+	 */
+	size = PAGE_ALIGN(size);
+	base = io_map_base - size;
+	ret = __hyp_alloc_private_va_range(base);
+
+	mutex_unlock(&kvm_hyp_pgd_mutex);
+
+	if (!ret)
+		*haddr = base;
+
+	return ret;
+}
+
+static int __create_hyp_private_mapping(phys_addr_t phys_addr, size_t size,
+					unsigned long *haddr,
+					enum kvm_pgtable_prot prot)
+{
+	unsigned long addr;
+	int ret = 0;
+
+	if (!kvm_host_owns_hyp_mappings()) {
+		addr = kvm_call_hyp_nvhe(__pkvm_create_private_mapping,
+					 phys_addr, size, prot);
+		if (IS_ERR_VALUE(addr))
+			return addr;
+		*haddr = addr;
+
+		return 0;
+	}
+
+	size = PAGE_ALIGN(size + offset_in_page(phys_addr));
+	ret = hyp_alloc_private_va_range(size, &addr);
+	if (ret)
+		return ret;
+
+	ret = __create_hyp_mappings(addr, size, phys_addr, prot);
+	if (ret)
+		return ret;
+
+	*haddr = addr + offset_in_page(phys_addr);
+	return ret;
+}
+
+int create_hyp_stack(phys_addr_t phys_addr, unsigned long *haddr)
+{
+	unsigned long base;
+	size_t size;
+	int ret;
+
+	mutex_lock(&kvm_hyp_pgd_mutex);
+	/*
+	 * Efficient stack verification using the PAGE_SHIFT bit implies
+	 * an alignment of our allocation on the order of the size.
+	 */
+	size = PAGE_SIZE * 2;
+	base = ALIGN_DOWN(io_map_base - size, size);
+
+	ret = __hyp_alloc_private_va_range(base);
+
+	mutex_unlock(&kvm_hyp_pgd_mutex);
+
+	if (ret) {
+		kvm_err("Cannot allocate hyp stack guard page\n");
+		return ret;
+	}
+
+	/*
+	 * Since the stack grows downwards, map the stack to the page
+	 * at the higher address and leave the lower guard page
+	 * unbacked.
+	 *
+	 * Any valid stack address now has the PAGE_SHIFT bit as 1
+	 * and addresses corresponding to the guard page have the
+	 * PAGE_SHIFT bit as 0 - this is used for overflow detection.
+	 */
+	ret = __create_hyp_mappings(base + PAGE_SIZE, PAGE_SIZE, phys_addr,
+				    PAGE_HYP);
+	if (ret)
+		kvm_err("Cannot map hyp stack\n");
+
+	*haddr = base + size;
+
+	return ret;
+}
+
+/**
+ * create_hyp_io_mappings - Map IO into both kernel and HYP
+ * @phys_addr:	The physical start address which gets mapped
+ * @size:	Size of the region being mapped
+ * @kaddr:	Kernel VA for this mapping
+ * @haddr:	HYP VA for this mapping
+ */
+int create_hyp_io_mappings(phys_addr_t phys_addr, size_t size,
+			   void __iomem **kaddr,
+			   void __iomem **haddr)
+{
+	unsigned long addr;
+	int ret;
+
+	if (is_protected_kvm_enabled())
+		return -EPERM;
+
+	*kaddr = ioremap(phys_addr, size);
+	if (!*kaddr)
+		return -ENOMEM;
+
+	if (is_kernel_in_hyp_mode()) {
+		*haddr = *kaddr;
+		return 0;
+	}
+
+	ret = __create_hyp_private_mapping(phys_addr, size,
+					   &addr, PAGE_HYP_DEVICE);
+	if (ret) {
+		iounmap(*kaddr);
+		*kaddr = NULL;
+		*haddr = NULL;
+		return ret;
+	}
+
+	*haddr = (void __iomem *)addr;
+	return 0;
+}
+
+/**
+ * create_hyp_exec_mappings - Map an executable range into HYP
+ * @phys_addr:	The physical start address which gets mapped
+ * @size:	Size of the region being mapped
+ * @haddr:	HYP VA for this mapping
+ */
+int create_hyp_exec_mappings(phys_addr_t phys_addr, size_t size,
+			     void **haddr)
+{
+	unsigned long addr;
+	int ret;
+
+	BUG_ON(is_kernel_in_hyp_mode());
+
+	ret = __create_hyp_private_mapping(phys_addr, size,
+					   &addr, PAGE_HYP_EXEC);
+	if (ret) {
+		*haddr = NULL;
+		return ret;
+	}
+
+	*haddr = (void *)addr;
+	return 0;
+}
+
+static struct kvm_pgtable_mm_ops kvm_user_mm_ops = {
+	/* We shouldn't need any other callback to walk the PT */
+	.phys_to_virt		= kvm_host_va,
+};
+
+static int get_user_mapping_size(struct kvm *kvm, u64 addr)
+{
+	struct kvm_pgtable pgt = {
+		.pgd		= (kvm_pteref_t)kvm->mm->pgd,
+		.ia_bits	= vabits_actual,
+		.start_level	= (KVM_PGTABLE_MAX_LEVELS -
+				   CONFIG_PGTABLE_LEVELS),
+		.mm_ops		= &kvm_user_mm_ops,
+	};
+	unsigned long flags;
+	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
+	u32 level = ~0;
+	int ret;
+
+	/*
+	 * Disable IRQs so that we hazard against a concurrent
+	 * teardown of the userspace page tables (which relies on
+	 * IPI-ing threads).
+	 */
+	local_irq_save(flags);
+	ret = kvm_pgtable_get_leaf(&pgt, addr, &pte, &level);
+	local_irq_restore(flags);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Not seeing an error, but not updating level? Something went
+	 * deeply wrong...
+	 */
+	if (WARN_ON(level >= KVM_PGTABLE_MAX_LEVELS))
+		return -EFAULT;
+
+	/* Oops, the userspace PTs are gone... Replay the fault */
+	if (!kvm_pte_valid(pte))
+		return -EAGAIN;
+
+	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(level));
+}
+
+static struct kvm_pgtable_mm_ops kvm_s2_mm_ops = {
+	.zalloc_page		= stage2_memcache_zalloc_page,
+	.zalloc_pages_exact	= kvm_s2_zalloc_pages_exact,
+	.free_pages_exact	= kvm_s2_free_pages_exact,
+	.free_unlinked_table	= stage2_free_unlinked_table,
+	.get_page		= kvm_host_get_page,
+	.put_page		= kvm_s2_put_page,
+	.page_count		= kvm_host_page_count,
+	.phys_to_virt		= kvm_host_va,
+	.virt_to_phys		= kvm_host_pa,
+	.dcache_clean_inval_poc	= clean_dcache_guest_page,
+	.icache_inval_pou	= invalidate_icache_guest_page,
+};
+
+/**
+ * kvm_init_stage2_mmu - Initialise a S2 MMU structure
+ * @kvm:	The pointer to the KVM structure
+ * @mmu:	The pointer to the s2 MMU structure
+ * @type:	The machine type of the virtual machine
+ *
+ * Allocates only the stage-2 HW PGD level table(s).
+ * Note we don't need locking here as this is only called when the VM is
+ * created, which can only be done once.
+ */
+int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu, unsigned long type)
+{
+	u32 kvm_ipa_limit = get_kvm_ipa_limit();
+	int cpu, err;
+	struct kvm_pgtable *pgt;
+	u64 mmfr0, mmfr1;
+	u32 phys_shift;
+
+	if (type & ~KVM_VM_TYPE_ARM_IPA_SIZE_MASK)
+		return -EINVAL;
+
+	phys_shift = KVM_VM_TYPE_ARM_IPA_SIZE(type);
+	if (is_protected_kvm_enabled()) {
+		phys_shift = kvm_ipa_limit;
+	} else if (phys_shift) {
+		if (phys_shift > kvm_ipa_limit ||
+		    phys_shift < ARM64_MIN_PARANGE_BITS)
+			return -EINVAL;
+	} else {
+		phys_shift = KVM_PHYS_SHIFT;
+		if (phys_shift > kvm_ipa_limit) {
+			pr_warn_once("%s using unsupported default IPA limit, upgrade your VMM\n",
+				     current->comm);
+			return -EINVAL;
+		}
+	}
+
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	kvm->arch.vtcr = kvm_get_vtcr(mmfr0, mmfr1, phys_shift);
+
+	if (mmu->pgt != NULL) {
+		kvm_err("kvm_arch already initialized?\n");
+		return -EINVAL;
+	}
+
+	pgt = kzalloc(sizeof(*pgt), GFP_KERNEL_ACCOUNT);
+	if (!pgt)
+		return -ENOMEM;
+
+	mmu->arch = &kvm->arch;
+	err = kvm_pgtable_stage2_init(pgt, mmu, &kvm_s2_mm_ops);
+	if (err)
+		goto out_free_pgtable;
+
+	mmu->last_vcpu_ran = alloc_percpu(typeof(*mmu->last_vcpu_ran));
+	if (!mmu->last_vcpu_ran) {
+		err = -ENOMEM;
+		goto out_destroy_pgtable;
+	}
+
+	for_each_possible_cpu(cpu)
+		*per_cpu_ptr(mmu->last_vcpu_ran, cpu) = -1;
+
+	 /* The eager page splitting is disabled by default */
+	mmu->split_page_chunk_size = KVM_ARM_EAGER_SPLIT_CHUNK_SIZE_DEFAULT;
+	mmu->split_page_cache.gfp_zero = __GFP_ZERO;
+
+	mmu->pgt = pgt;
+	mmu->pgd_phys = __pa(pgt->pgd);
+	return 0;
+
+out_destroy_pgtable:
+	kvm_pgtable_stage2_destroy(pgt);
+out_free_pgtable:
+	kfree(pgt);
+	return err;
+}
+
+void kvm_uninit_stage2_mmu(struct kvm *kvm)
+{
+	kvm_free_stage2_pgd(&kvm->arch.mmu);
+	kvm_mmu_free_memory_cache(&kvm->arch.mmu.split_page_cache);
+}
+
+static void stage2_unmap_memslot(struct kvm *kvm,
+				 struct kvm_memory_slot *memslot)
+{
+	hva_t hva = memslot->userspace_addr;
+	phys_addr_t addr = memslot->base_gfn << PAGE_SHIFT;
+	phys_addr_t size = PAGE_SIZE * memslot->npages;
+	hva_t reg_end = hva + size;
+
+	/*
+	 * A memory region could potentially cover multiple VMAs, and any holes
+	 * between them, so iterate over all of them to find out if we should
+	 * unmap any of them.
+	 *
+	 *     +--------------------------------------------+
+	 * +---------------+----------------+   +----------------+
+	 * |   : VMA 1     |      VMA 2     |   |    VMA 3  :    |
+	 * +---------------+----------------+   +----------------+
+	 *     |               memory region                |
+	 *     +--------------------------------------------+
+	 */
+	do {
+		struct vm_area_struct *vma;
+		hva_t vm_start, vm_end;
+
+		vma = find_vma_intersection(current->mm, hva, reg_end);
+		if (!vma)
+			break;
+
+		/*
+		 * Take the intersection of this VMA with the memory region
+		 */
+		vm_start = max(hva, vma->vm_start);
+		vm_end = min(reg_end, vma->vm_end);
+
+		if (!(vma->vm_flags & VM_PFNMAP)) {
+			gpa_t gpa = addr + (vm_start - memslot->userspace_addr);
+			unmap_stage2_range(&kvm->arch.mmu, gpa, vm_end - vm_start);
+		}
+		hva = vm_end;
+	} while (hva < reg_end);
+}
+
+/**
+ * stage2_unmap_vm - Unmap Stage-2 RAM mappings
+ * @kvm: The struct kvm pointer
+ *
+ * Go through the memregions and unmap any regular RAM
+ * backing memory already mapped to the VM.
+ */
+void stage2_unmap_vm(struct kvm *kvm)
+{
+	struct kvm_memslots *slots;
+	struct kvm_memory_slot *memslot;
+	int idx, bkt;
+
+	idx = srcu_read_lock(&kvm->srcu);
+	mmap_read_lock(current->mm);
+	write_lock(&kvm->mmu_lock);
+
+	slots = kvm_memslots(kvm);
+	kvm_for_each_memslot(memslot, bkt, slots)
+		stage2_unmap_memslot(kvm, memslot);
+
+	write_unlock(&kvm->mmu_lock);
+	mmap_read_unlock(current->mm);
+	srcu_read_unlock(&kvm->srcu, idx);
+}
+
+void kvm_free_stage2_pgd(struct kvm_s2_mmu *mmu)
+{
+	struct kvm *kvm = kvm_s2_mmu_to_kvm(mmu);
+	struct kvm_pgtable *pgt = NULL;
+
+	write_lock(&kvm->mmu_lock);
+	pgt = mmu->pgt;
+	if (pgt) {
+		mmu->pgd_phys = 0;
+		mmu->pgt = NULL;
+		free_percpu(mmu->last_vcpu_ran);
+	}
+	write_unlock(&kvm->mmu_lock);
+
+	if (pgt) {
+		kvm_pgtable_stage2_destroy(pgt);
+		kfree(pgt);
+	}
+}
+
+static void hyp_mc_free_fn(void *addr, void *unused)
+{
+	free_page((unsigned long)addr);
+}
+
+static void *hyp_mc_alloc_fn(void *unused)
+{
+	return (void *)__get_free_page(GFP_KERNEL_ACCOUNT);
+}
+
+void free_hyp_memcache(struct kvm_hyp_memcache *mc)
+{
+	if (is_protected_kvm_enabled())
+		__free_hyp_memcache(mc, hyp_mc_free_fn,
+				    kvm_host_va, NULL);
+}
+
+int topup_hyp_memcache(struct kvm_hyp_memcache *mc, unsigned long min_pages)
+{
+	if (!is_protected_kvm_enabled())
+		return 0;
+
+	return __topup_hyp_memcache(mc, min_pages, hyp_mc_alloc_fn,
+				    kvm_host_pa, NULL);
+}
+
+/**
+ * kvm_phys_addr_ioremap - map a device range to guest IPA
+ *
+ * @kvm:	The KVM pointer
+ * @guest_ipa:	The IPA at which to insert the mapping
+ * @pa:		The physical address of the device
+ * @size:	The size of the mapping
+ * @writable:   Whether or not to create a writable mapping
+ */
+int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
+			  phys_addr_t pa, unsigned long size, bool writable)
+{
+	phys_addr_t addr;
+	int ret = 0;
+	struct kvm_mmu_memory_cache cache = { .gfp_zero = __GFP_ZERO };
+	struct kvm_pgtable *pgt = kvm->arch.mmu.pgt;
+	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_DEVICE |
+				     KVM_PGTABLE_PROT_R |
+				     (writable ? KVM_PGTABLE_PROT_W : 0);
+
+	if (is_protected_kvm_enabled())
+		return -EPERM;
+
+	size += offset_in_page(guest_ipa);
+	guest_ipa &= PAGE_MASK;
+
+	for (addr = guest_ipa; addr < guest_ipa + size; addr += PAGE_SIZE) {
+		ret = kvm_mmu_topup_memory_cache(&cache,
+						 kvm_mmu_cache_min_pages(kvm));
+		if (ret)
+			break;
+
+		write_lock(&kvm->mmu_lock);
+		ret = kvm_pgtable_stage2_map(pgt, addr, PAGE_SIZE, pa, prot,
+					     &cache, 0);
+		write_unlock(&kvm->mmu_lock);
+		if (ret)
+			break;
+
+		pa += PAGE_SIZE;
+	}
+
+	kvm_mmu_free_memory_cache(&cache);
+	return ret;
+}
+
+/**
+ * stage2_wp_range() - write protect stage2 memory region range
+ * @mmu:        The KVM stage-2 MMU pointer
+ * @addr:	Start address of range
+ * @end:	End address of range
+ */
+static void stage2_wp_range(struct kvm_s2_mmu *mmu, phys_addr_t addr, phys_addr_t end)
+{
+	stage2_apply_range_resched(mmu, addr, end, kvm_pgtable_stage2_wrprotect);
+}
+
+/**
+ * kvm_mmu_wp_memory_region() - write protect stage 2 entries for memory slot
+ * @kvm:	The KVM pointer
+ * @slot:	The memory slot to write protect
+ *
+ * Called to start logging dirty pages after memory region
+ * KVM_MEM_LOG_DIRTY_PAGES operation is called. After this function returns
+ * all present PUD, PMD and PTEs are write protected in the memory region.
+ * Afterwards read of dirty page log can be called.
+ *
+ * Acquires kvm_mmu_lock. Called with kvm->slots_lock mutex acquired,
+ * serializing operations for VM memory regions.
+ */
+static void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot)
+{
+	struct kvm_memslots *slots = kvm_memslots(kvm);
+	struct kvm_memory_slot *memslot = id_to_memslot(slots, slot);
+	phys_addr_t start, end;
+
+	if (WARN_ON_ONCE(!memslot))
+		return;
+
+	start = memslot->base_gfn << PAGE_SHIFT;
+	end = (memslot->base_gfn + memslot->npages) << PAGE_SHIFT;
+
+	write_lock(&kvm->mmu_lock);
+	stage2_wp_range(&kvm->arch.mmu, start, end);
+	write_unlock(&kvm->mmu_lock);
+	kvm_flush_remote_tlbs_memslot(kvm, memslot);
+}
+
+/**
+ * kvm_mmu_split_memory_region() - split the stage 2 blocks into PAGE_SIZE
+ *				   pages for memory slot
+ * @kvm:	The KVM pointer
+ * @slot:	The memory slot to split
+ *
+ * Acquires kvm->mmu_lock. Called with kvm->slots_lock mutex acquired,
+ * serializing operations for VM memory regions.
+ */
+static void kvm_mmu_split_memory_region(struct kvm *kvm, int slot)
+{
+	struct kvm_memslots *slots;
+	struct kvm_memory_slot *memslot;
+	phys_addr_t start, end;
+
+	lockdep_assert_held(&kvm->slots_lock);
+
+	slots = kvm_memslots(kvm);
+	memslot = id_to_memslot(slots, slot);
+
+	start = memslot->base_gfn << PAGE_SHIFT;
+	end = (memslot->base_gfn + memslot->npages) << PAGE_SHIFT;
+
+	write_lock(&kvm->mmu_lock);
+	kvm_mmu_split_huge_pages(kvm, start, end);
+	write_unlock(&kvm->mmu_lock);
+}
+
+/*
+ * kvm_arch_mmu_enable_log_dirty_pt_masked() - enable dirty logging for selected pages.
+ * @kvm:	The KVM pointer
+ * @slot:	The memory slot associated with mask
+ * @gfn_offset:	The gfn offset in memory slot
+ * @mask:	The mask of pages at offset 'gfn_offset' in this memory
+ *		slot to enable dirty logging on
+ *
+ * Writes protect selected pages to enable dirty logging, and then
+ * splits them to PAGE_SIZE. Caller must acquire kvm->mmu_lock.
+ */
+void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
+		struct kvm_memory_slot *slot,
+		gfn_t gfn_offset, unsigned long mask)
+{
+	phys_addr_t base_gfn = slot->base_gfn + gfn_offset;
+	phys_addr_t start = (base_gfn +  __ffs(mask)) << PAGE_SHIFT;
+	phys_addr_t end = (base_gfn + __fls(mask) + 1) << PAGE_SHIFT;
+
+	lockdep_assert_held_write(&kvm->mmu_lock);
+
+	stage2_wp_range(&kvm->arch.mmu, start, end);
+
+	/*
+	 * Eager-splitting is done when manual-protect is set.  We
+	 * also check for initially-all-set because we can avoid
+	 * eager-splitting if initially-all-set is false.
+	 * Initially-all-set equal false implies that huge-pages were
+	 * already split when enabling dirty logging: no need to do it
+	 * again.
+	 */
+	if (kvm_dirty_log_manual_protect_and_init_set(kvm))
+		kvm_mmu_split_huge_pages(kvm, start, end);
+}
+
+static void kvm_send_hwpoison_signal(unsigned long address, short lsb)
+{
+	send_sig_mceerr(BUS_MCEERR_AR, (void __user *)address, lsb, current);
+}
+
+static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
+					       unsigned long hva,
+					       unsigned long map_size)
+{
+	gpa_t gpa_start;
+	hva_t uaddr_start, uaddr_end;
+	size_t size;
+
+	/* The memslot and the VMA are guaranteed to be aligned to PAGE_SIZE */
+	if (map_size == PAGE_SIZE)
+		return true;
+
+	size = memslot->npages * PAGE_SIZE;
+
+	gpa_start = memslot->base_gfn << PAGE_SHIFT;
+
+	uaddr_start = memslot->userspace_addr;
+	uaddr_end = uaddr_start + size;
+
+	/*
+	 * Pages belonging to memslots that don't have the same alignment
+	 * within a PMD/PUD for userspace and IPA cannot be mapped with stage-2
+	 * PMD/PUD entries, because we'll end up mapping the wrong pages.
+	 *
+	 * Consider a layout like the following:
+	 *
+	 *    memslot->userspace_addr:
+	 *    +-----+--------------------+--------------------+---+
+	 *    |abcde|fgh  Stage-1 block  |    Stage-1 block tv|xyz|
+	 *    +-----+--------------------+--------------------+---+
+	 *
+	 *    memslot->base_gfn << PAGE_SHIFT:
+	 *      +---+--------------------+--------------------+-----+
+	 *      |abc|def  Stage-2 block  |    Stage-2 block   |tvxyz|
+	 *      +---+--------------------+--------------------+-----+
+	 *
+	 * If we create those stage-2 blocks, we'll end up with this incorrect
+	 * mapping:
+	 *   d -> f
+	 *   e -> g
+	 *   f -> h
+	 */
+	if ((gpa_start & (map_size - 1)) != (uaddr_start & (map_size - 1)))
+		return false;
+
+	/*
+	 * Next, let's make sure we're not trying to map anything not covered
+	 * by the memslot. This means we have to prohibit block size mappings
+	 * for the beginning and end of a non-block aligned and non-block sized
+	 * memory slot (illustrated by the head and tail parts of the
+	 * userspace view above containing pages 'abcde' and 'xyz',
+	 * respectively).
+	 *
+	 * Note that it doesn't matter if we do the check using the
+	 * userspace_addr or the base_gfn, as both are equally aligned (per
+	 * the check above) and equally sized.
+	 */
+	return (hva & ~(map_size - 1)) >= uaddr_start &&
+	       (hva & ~(map_size - 1)) + map_size <= uaddr_end;
+}
+
+/*
+ * Check if the given hva is backed by a transparent huge page (THP) and
+ * whether it can be mapped using block mapping in stage2. If so, adjust
+ * the stage2 PFN and IPA accordingly. Only PMD_SIZE THPs are currently
+ * supported. This will need to be updated to support other THP sizes.
+ *
+ * Returns the size of the mapping.
+ */
+static long
+transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
+			    unsigned long hva, kvm_pfn_t *pfnp,
+			    phys_addr_t *ipap)
+{
+	kvm_pfn_t pfn = *pfnp;
+
+	/*
+	 * Make sure the adjustment is done only for THP pages. Also make
+	 * sure that the HVA and IPA are sufficiently aligned and that the
+	 * block map is contained within the memslot.
+	 */
+	if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) {
+		int sz = get_user_mapping_size(kvm, hva);
+
+		if (sz < 0)
+			return sz;
+
+		if (sz < PMD_SIZE)
+			return PAGE_SIZE;
+
+		/*
+		 * The address we faulted on is backed by a transparent huge
+		 * page.  However, because we map the compound huge page and
+		 * not the individual tail page, we need to transfer the
+		 * refcount to the head page.  We have to be careful that the
+		 * THP doesn't start to split while we are adjusting the
+		 * refcounts.
+		 *
+		 * We are sure this doesn't happen, because mmu_invalidate_retry
+		 * was successful and we are holding the mmu_lock, so if this
+		 * THP is trying to split, it will be blocked in the mmu
+		 * notifier before touching any of the pages, specifically
+		 * before being able to call __split_huge_page_refcount().
+		 *
+		 * We can therefore safely transfer the refcount from PG_tail
+		 * to PG_head and switch the pfn from a tail page to the head
+		 * page accordingly.
+		 */
+		*ipap &= PMD_MASK;
+		kvm_release_pfn_clean(pfn);
+		pfn &= ~(PTRS_PER_PMD - 1);
+		get_page(pfn_to_page(pfn));
+		*pfnp = pfn;
+
+		return PMD_SIZE;
+	}
+
+	/* Use page mapping if we cannot use block mapping. */
+	return PAGE_SIZE;
+}
+
+static int get_vma_page_shift(struct vm_area_struct *vma, unsigned long hva)
+{
+	unsigned long pa;
+
+	if (is_vm_hugetlb_page(vma) && !(vma->vm_flags & VM_PFNMAP))
+		return huge_page_shift(hstate_vma(vma));
+
+	if (!(vma->vm_flags & VM_PFNMAP))
+		return PAGE_SHIFT;
+
+	VM_BUG_ON(is_vm_hugetlb_page(vma));
+
+	pa = (vma->vm_pgoff << PAGE_SHIFT) + (hva - vma->vm_start);
+
+#ifndef __PAGETABLE_PMD_FOLDED
+	if ((hva & (PUD_SIZE - 1)) == (pa & (PUD_SIZE - 1)) &&
+	    ALIGN_DOWN(hva, PUD_SIZE) >= vma->vm_start &&
+	    ALIGN(hva, PUD_SIZE) <= vma->vm_end)
+		return PUD_SHIFT;
+#endif
+
+	if ((hva & (PMD_SIZE - 1)) == (pa & (PMD_SIZE - 1)) &&
+	    ALIGN_DOWN(hva, PMD_SIZE) >= vma->vm_start &&
+	    ALIGN(hva, PMD_SIZE) <= vma->vm_end)
+		return PMD_SHIFT;
+
+	return PAGE_SHIFT;
+}
+
+/*
+ * The page will be mapped in stage 2 as Normal Cacheable, so the VM will be
+ * able to see the page's tags and therefore they must be initialised first. If
+ * PG_mte_tagged is set, tags have already been initialised.
+ *
+ * The race in the test/set of the PG_mte_tagged flag is handled by:
+ * - preventing VM_SHARED mappings in a memslot with MTE preventing two VMs
+ *   racing to santise the same page
+ * - mmap_lock protects between a VM faulting a page in and the VMM performing
+ *   an mprotect() to add VM_MTE
+ */
+static void sanitise_mte_tags(struct kvm *kvm, kvm_pfn_t pfn,
+			      unsigned long size)
+{
+	unsigned long i, nr_pages = size >> PAGE_SHIFT;
+	struct page *page = pfn_to_page(pfn);
+
+	if (!kvm_has_mte(kvm))
+		return;
+
+	for (i = 0; i < nr_pages; i++, page++) {
+		if (try_page_mte_tagging(page)) {
+			mte_clear_page_tags(page_address(page));
+			set_page_mte_tagged(page);
+		}
+	}
+}
+
+static bool kvm_vma_mte_allowed(struct vm_area_struct *vma)
+{
+	return vma->vm_flags & VM_MTE_ALLOWED;
+}
+
+static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
+			  struct kvm_memory_slot *memslot, unsigned long hva,
+			  unsigned long fault_status)
+{
+	int ret = 0;
+	bool write_fault, writable, force_pte = false;
+	bool exec_fault, mte_allowed;
+	bool device = false;
+	unsigned long mmu_seq;
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
+	struct vm_area_struct *vma;
+	short vma_shift;
+	gfn_t gfn;
+	kvm_pfn_t pfn;
+	bool logging_active = memslot_is_logging(memslot);
+	unsigned long fault_level = kvm_vcpu_trap_get_fault_level(vcpu);
+	long vma_pagesize, fault_granule;
+	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R;
+	struct kvm_pgtable *pgt;
+
+	fault_granule = 1UL << ARM64_HW_PGTABLE_LEVEL_SHIFT(fault_level);
+	write_fault = kvm_is_write_fault(vcpu);
+	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
+	VM_BUG_ON(write_fault && exec_fault);
+
+	if (fault_status == ESR_ELx_FSC_PERM && !write_fault && !exec_fault) {
+		kvm_err("Unexpected L2 read permission error\n");
+		return -EFAULT;
+	}
+
+	/*
+	 * Permission faults just need to update the existing leaf entry,
+	 * and so normally don't require allocations from the memcache. The
+	 * only exception to this is when dirty logging is enabled at runtime
+	 * and a write fault needs to collapse a block entry into a table.
+	 */
+	if (fault_status != ESR_ELx_FSC_PERM ||
+	    (logging_active && write_fault)) {
+		ret = kvm_mmu_topup_memory_cache(memcache,
+						 kvm_mmu_cache_min_pages(kvm));
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * Let's check if we will get back a huge page backed by hugetlbfs, or
+	 * get block mapping for device MMIO region.
+	 */
+	mmap_read_lock(current->mm);
+	vma = vma_lookup(current->mm, hva);
+	if (unlikely(!vma)) {
+		kvm_err("Failed to find VMA for hva 0x%lx\n", hva);
+		mmap_read_unlock(current->mm);
+		return -EFAULT;
+	}
+
+	/*
+	 * logging_active is guaranteed to never be true for VM_PFNMAP
+	 * memslots.
+	 */
+	if (logging_active) {
+		force_pte = true;
+		vma_shift = PAGE_SHIFT;
+	} else {
+		vma_shift = get_vma_page_shift(vma, hva);
+	}
+
+	switch (vma_shift) {
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SHIFT:
+		if (fault_supports_stage2_huge_mapping(memslot, hva, PUD_SIZE))
+			break;
+		fallthrough;
+#endif
+	case CONT_PMD_SHIFT:
+		vma_shift = PMD_SHIFT;
+		fallthrough;
+	case PMD_SHIFT:
+		if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE))
+			break;
+		fallthrough;
+	case CONT_PTE_SHIFT:
+		vma_shift = PAGE_SHIFT;
+		force_pte = true;
+		fallthrough;
+	case PAGE_SHIFT:
+		break;
+	default:
+		WARN_ONCE(1, "Unknown vma_shift %d", vma_shift);
+	}
+
+	vma_pagesize = 1UL << vma_shift;
+	if (vma_pagesize == PMD_SIZE || vma_pagesize == PUD_SIZE)
+		fault_ipa &= ~(vma_pagesize - 1);
+
+	gfn = fault_ipa >> PAGE_SHIFT;
+	mte_allowed = kvm_vma_mte_allowed(vma);
+
+	/* Don't use the VMA after the unlock -- it may have vanished */
+	vma = NULL;
+
+	/*
+	 * Read mmu_invalidate_seq so that KVM can detect if the results of
+	 * vma_lookup() or __gfn_to_pfn_memslot() become stale prior to
+	 * acquiring kvm->mmu_lock.
+	 *
+	 * Rely on mmap_read_unlock() for an implicit smp_rmb(), which pairs
+	 * with the smp_wmb() in kvm_mmu_invalidate_end().
+	 */
+	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
+	mmap_read_unlock(current->mm);
+
+	pfn = __gfn_to_pfn_memslot(memslot, gfn, false, false, NULL,
+				   write_fault, &writable, NULL);
+	if (pfn == KVM_PFN_ERR_HWPOISON) {
+		kvm_send_hwpoison_signal(hva, vma_shift);
+		return 0;
+	}
+	if (is_error_noslot_pfn(pfn))
+		return -EFAULT;
+
+	if (kvm_is_device_pfn(pfn)) {
+		/*
+		 * If the page was identified as device early by looking at
+		 * the VMA flags, vma_pagesize is already representing the
+		 * largest quantity we can map.  If instead it was mapped
+		 * via gfn_to_pfn_prot(), vma_pagesize is set to PAGE_SIZE
+		 * and must not be upgraded.
+		 *
+		 * In both cases, we don't let transparent_hugepage_adjust()
+		 * change things at the last minute.
+		 */
+		device = true;
+	} else if (logging_active && !write_fault) {
+		/*
+		 * Only actually map the page as writable if this was a write
+		 * fault.
+		 */
+		writable = false;
+	}
+
+	if (exec_fault && device)
+		return -ENOEXEC;
+
+	read_lock(&kvm->mmu_lock);
+	pgt = vcpu->arch.hw_mmu->pgt;
+	if (mmu_invalidate_retry(kvm, mmu_seq))
+		goto out_unlock;
+
+	/*
+	 * If we are not forced to use page mapping, check if we are
+	 * backed by a THP and thus use block mapping if possible.
+	 */
+	if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) {
+		if (fault_status ==  ESR_ELx_FSC_PERM &&
+		    fault_granule > PAGE_SIZE)
+			vma_pagesize = fault_granule;
+		else
+			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
+								   hva, &pfn,
+								   &fault_ipa);
+
+		if (vma_pagesize < 0) {
+			ret = vma_pagesize;
+			goto out_unlock;
+		}
+	}
+
+	if (fault_status != ESR_ELx_FSC_PERM && !device && kvm_has_mte(kvm)) {
+		/* Check the VMM hasn't introduced a new disallowed VMA */
+		if (mte_allowed) {
+			sanitise_mte_tags(kvm, pfn, vma_pagesize);
+		} else {
+			ret = -EFAULT;
+			goto out_unlock;
+		}
+	}
+
+	if (writable)
+		prot |= KVM_PGTABLE_PROT_W;
+
+	if (exec_fault)
+		prot |= KVM_PGTABLE_PROT_X;
+
+	if (device)
+		prot |= KVM_PGTABLE_PROT_DEVICE;
+	else if (cpus_have_const_cap(ARM64_HAS_CACHE_DIC))
+		prot |= KVM_PGTABLE_PROT_X;
+
+	/*
+	 * Under the premise of getting a FSC_PERM fault, we just need to relax
+	 * permissions only if vma_pagesize equals fault_granule. Otherwise,
+	 * kvm_pgtable_stage2_map() should be called to change block size.
+	 */
+	if (fault_status == ESR_ELx_FSC_PERM && vma_pagesize == fault_granule)
+		ret = kvm_pgtable_stage2_relax_perms(pgt, fault_ipa, prot);
+	else
+		ret = kvm_pgtable_stage2_map(pgt, fault_ipa, vma_pagesize,
+					     __pfn_to_phys(pfn), prot,
+					     memcache,
+					     KVM_PGTABLE_WALK_HANDLE_FAULT |
+					     KVM_PGTABLE_WALK_SHARED);
+
+	/* Mark the page dirty only if the fault is handled successfully */
+	if (writable && !ret) {
+		kvm_set_pfn_dirty(pfn);
+		mark_page_dirty_in_slot(kvm, memslot, gfn);
+	}
+
+out_unlock:
+	read_unlock(&kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return ret != -EAGAIN ? ret : 0;
+}
+
+/* Resolve the access fault by making the page young again. */
+static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
+{
+	kvm_pte_t pte;
+	struct kvm_s2_mmu *mmu;
+
+	trace_kvm_access_fault(fault_ipa);
+
+	read_lock(&vcpu->kvm->mmu_lock);
+	mmu = vcpu->arch.hw_mmu;
+	pte = kvm_pgtable_stage2_mkyoung(mmu->pgt, fault_ipa);
+	read_unlock(&vcpu->kvm->mmu_lock);
+
+	if (kvm_pte_valid(pte))
+		kvm_set_pfn_accessed(kvm_pte_to_pfn(pte));
+}
+
+/**
+ * kvm_handle_guest_abort - handles all 2nd stage aborts
+ * @vcpu:	the VCPU pointer
+ *
+ * Any abort that gets to the host is almost guaranteed to be caused by a
+ * missing second stage translation table entry, which can mean that either the
+ * guest simply needs more memory and we must allocate an appropriate page or it
+ * can mean that the guest tried to access I/O memory, which is emulated by user
+ * space. The distinction is based on the IPA causing the fault and whether this
+ * memory region has been registered as standard RAM by user space.
+ */
+int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
+{
+	unsigned long fault_status;
+	phys_addr_t fault_ipa;
+	struct kvm_memory_slot *memslot;
+	unsigned long hva;
+	bool is_iabt, write_fault, writable;
+	gfn_t gfn;
+	int ret, idx;
+
+	fault_status = kvm_vcpu_trap_get_fault_type(vcpu);
+
+	fault_ipa = kvm_vcpu_get_fault_ipa(vcpu);
+	is_iabt = kvm_vcpu_trap_is_iabt(vcpu);
+
+	if (fault_status == ESR_ELx_FSC_FAULT) {
+		/* Beyond sanitised PARange (which is the IPA limit) */
+		if (fault_ipa >= BIT_ULL(get_kvm_ipa_limit())) {
+			kvm_inject_size_fault(vcpu);
+			return 1;
+		}
+
+		/* Falls between the IPA range and the PARange? */
+		if (fault_ipa >= BIT_ULL(vcpu->arch.hw_mmu->pgt->ia_bits)) {
+			fault_ipa |= kvm_vcpu_get_hfar(vcpu) & GENMASK(11, 0);
+
+			if (is_iabt)
+				kvm_inject_pabt(vcpu, fault_ipa);
+			else
+				kvm_inject_dabt(vcpu, fault_ipa);
+			return 1;
+		}
+	}
+
+	/* Synchronous External Abort? */
+	if (kvm_vcpu_abt_issea(vcpu)) {
+		/*
+		 * For RAS the host kernel may handle this abort.
+		 * There is no need to pass the error into the guest.
+		 */
+		if (kvm_handle_guest_sea(fault_ipa, kvm_vcpu_get_esr(vcpu)))
+			kvm_inject_vabt(vcpu);
+
+		return 1;
+	}
+
+	trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_esr(vcpu),
+			      kvm_vcpu_get_hfar(vcpu), fault_ipa);
+
+	/* Check the stage-2 fault is trans. fault or write fault */
+	if (fault_status != ESR_ELx_FSC_FAULT &&
+	    fault_status != ESR_ELx_FSC_PERM &&
+	    fault_status != ESR_ELx_FSC_ACCESS) {
+		kvm_err("Unsupported FSC: EC=%#x xFSC=%#lx ESR_EL2=%#lx\n",
+			kvm_vcpu_trap_get_class(vcpu),
+			(unsigned long)kvm_vcpu_trap_get_fault(vcpu),
+			(unsigned long)kvm_vcpu_get_esr(vcpu));
+		return -EFAULT;
+	}
+
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+
+	gfn = fault_ipa >> PAGE_SHIFT;
+	memslot = gfn_to_memslot(vcpu->kvm, gfn);
+	hva = gfn_to_hva_memslot_prot(memslot, gfn, &writable);
+	write_fault = kvm_is_write_fault(vcpu);
+	if (kvm_is_error_hva(hva) || (write_fault && !writable)) {
+		/*
+		 * The guest has put either its instructions or its page-tables
+		 * somewhere it shouldn't have. Userspace won't be able to do
+		 * anything about this (there's no syndrome for a start), so
+		 * re-inject the abort back into the guest.
+		 */
+		if (is_iabt) {
+			ret = -ENOEXEC;
+			goto out;
+		}
+
+		if (kvm_vcpu_abt_iss1tw(vcpu)) {
+			kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu));
+			ret = 1;
+			goto out_unlock;
+		}
+
+		/*
+		 * Check for a cache maintenance operation. Since we
+		 * ended-up here, we know it is outside of any memory
+		 * slot. But we can't find out if that is for a device,
+		 * or if the guest is just being stupid. The only thing
+		 * we know for sure is that this range cannot be cached.
+		 *
+		 * So let's assume that the guest is just being
+		 * cautious, and skip the instruction.
+		 */
+		if (kvm_is_error_hva(hva) && kvm_vcpu_dabt_is_cm(vcpu)) {
+			kvm_incr_pc(vcpu);
+			ret = 1;
+			goto out_unlock;
+		}
+
+		/*
+		 * The IPA is reported as [MAX:12], so we need to
+		 * complement it with the bottom 12 bits from the
+		 * faulting VA. This is always 12 bits, irrespective
+		 * of the page size.
+		 */
+		fault_ipa |= kvm_vcpu_get_hfar(vcpu) & ((1 << 12) - 1);
+		ret = io_mem_abort(vcpu, fault_ipa);
+		goto out_unlock;
+	}
+
+	/* Userspace should not be able to register out-of-bounds IPAs */
+	VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->kvm));
+
+	if (fault_status == ESR_ELx_FSC_ACCESS) {
+		handle_access_fault(vcpu, fault_ipa);
+		ret = 1;
+		goto out_unlock;
+	}
+
+	ret = user_mem_abort(vcpu, fault_ipa, memslot, hva, fault_status);
+	if (ret == 0)
+		ret = 1;
+out:
+	if (ret == -ENOEXEC) {
+		kvm_inject_pabt(vcpu, kvm_vcpu_get_hfar(vcpu));
+		ret = 1;
+	}
+out_unlock:
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
+	return ret;
+}
+
+bool kvm_unmap_gfn_range(struct kvm *kvm, struct kvm_gfn_range *range)
+{
+	if (!kvm->arch.mmu.pgt)
+		return false;
+
+	__unmap_stage2_range(&kvm->arch.mmu, range->start << PAGE_SHIFT,
+			     (range->end - range->start) << PAGE_SHIFT,
+			     range->may_block);
+
+	return false;
+}
+
+bool kvm_set_spte_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
+{
+	kvm_pfn_t pfn = pte_pfn(range->arg.pte);
+
+	if (!kvm->arch.mmu.pgt)
+		return false;
+
+	WARN_ON(range->end - range->start != 1);
+
+	/*
+	 * If the page isn't tagged, defer to user_mem_abort() for sanitising
+	 * the MTE tags. The S2 pte should have been unmapped by
+	 * mmu_notifier_invalidate_range_end().
+	 */
+	if (kvm_has_mte(kvm) && !page_mte_tagged(pfn_to_page(pfn)))
+		return false;
+
+	/*
+	 * We've moved a page around, probably through CoW, so let's treat
+	 * it just like a translation fault and the map handler will clean
+	 * the cache to the PoC.
+	 *
+	 * The MMU notifiers will have unmapped a huge PMD before calling
+	 * ->change_pte() (which in turn calls kvm_set_spte_gfn()) and
+	 * therefore we never need to clear out a huge PMD through this
+	 * calling path and a memcache is not required.
+	 */
+	kvm_pgtable_stage2_map(kvm->arch.mmu.pgt, range->start << PAGE_SHIFT,
+			       PAGE_SIZE, __pfn_to_phys(pfn),
+			       KVM_PGTABLE_PROT_R, NULL, 0);
+
+	return false;
+}
+
+bool kvm_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
+{
+	u64 size = (range->end - range->start) << PAGE_SHIFT;
+
+	if (!kvm->arch.mmu.pgt)
+		return false;
+
+	return kvm_pgtable_stage2_test_clear_young(kvm->arch.mmu.pgt,
+						   range->start << PAGE_SHIFT,
+						   size, true);
+}
+
+bool kvm_test_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
+{
+	u64 size = (range->end - range->start) << PAGE_SHIFT;
+
+	if (!kvm->arch.mmu.pgt)
+		return false;
+
+	return kvm_pgtable_stage2_test_clear_young(kvm->arch.mmu.pgt,
+						   range->start << PAGE_SHIFT,
+						   size, false);
+}
+
+phys_addr_t kvm_mmu_get_httbr(void)
+{
+	return __pa(hyp_pgtable->pgd);
+}
+
+phys_addr_t kvm_get_idmap_vector(void)
+{
+	return hyp_idmap_vector;
+}
+
+static int kvm_map_idmap_text(void)
+{
+	unsigned long size = hyp_idmap_end - hyp_idmap_start;
+	int err = __create_hyp_mappings(hyp_idmap_start, size, hyp_idmap_start,
+					PAGE_HYP_EXEC);
+	if (err)
+		kvm_err("Failed to idmap %lx-%lx\n",
+			hyp_idmap_start, hyp_idmap_end);
+
+	return err;
+}
+
+static void *kvm_hyp_zalloc_page(void *arg)
+{
+	return (void *)get_zeroed_page(GFP_KERNEL);
+}
+
+static struct kvm_pgtable_mm_ops kvm_hyp_mm_ops = {
+	.zalloc_page		= kvm_hyp_zalloc_page,
+	.get_page		= kvm_host_get_page,
+	.put_page		= kvm_host_put_page,
+	.phys_to_virt		= kvm_host_va,
+	.virt_to_phys		= kvm_host_pa,
+};
+
+int __init kvm_mmu_init(u32 *hyp_va_bits)
+{
+	int err;
+	u32 idmap_bits;
+	u32 kernel_bits;
+
+	hyp_idmap_start = __pa_symbol(__hyp_idmap_text_start);
+	hyp_idmap_start = ALIGN_DOWN(hyp_idmap_start, PAGE_SIZE);
+	hyp_idmap_end = __pa_symbol(__hyp_idmap_text_end);
+	hyp_idmap_end = ALIGN(hyp_idmap_end, PAGE_SIZE);
+	hyp_idmap_vector = __pa_symbol(__kvm_hyp_init);
+
+	/*
+	 * We rely on the linker script to ensure at build time that the HYP
+	 * init code does not cross a page boundary.
+	 */
+	BUG_ON((hyp_idmap_start ^ (hyp_idmap_end - 1)) & PAGE_MASK);
+
+	/*
+	 * The ID map may be configured to use an extended virtual address
+	 * range. This is only the case if system RAM is out of range for the
+	 * currently configured page size and VA_BITS_MIN, in which case we will
+	 * also need the extended virtual range for the HYP ID map, or we won't
+	 * be able to enable the EL2 MMU.
+	 *
+	 * However, in some cases the ID map may be configured for fewer than
+	 * the number of VA bits used by the regular kernel stage 1. This
+	 * happens when VA_BITS=52 and the kernel image is placed in PA space
+	 * below 48 bits.
+	 *
+	 * At EL2, there is only one TTBR register, and we can't switch between
+	 * translation tables *and* update TCR_EL2.T0SZ at the same time. Bottom
+	 * line: we need to use the extended range with *both* our translation
+	 * tables.
+	 *
+	 * So use the maximum of the idmap VA bits and the regular kernel stage
+	 * 1 VA bits to assure that the hypervisor can both ID map its code page
+	 * and map any kernel memory.
+	 */
+	idmap_bits = 64 - ((idmap_t0sz & TCR_T0SZ_MASK) >> TCR_T0SZ_OFFSET);
+	kernel_bits = vabits_actual;
+	*hyp_va_bits = max(idmap_bits, kernel_bits);
+
+	kvm_debug("Using %u-bit virtual addresses at EL2\n", *hyp_va_bits);
+	kvm_debug("IDMAP page: %lx\n", hyp_idmap_start);
+	kvm_debug("HYP VA range: %lx:%lx\n",
+		  kern_hyp_va(PAGE_OFFSET),
+		  kern_hyp_va((unsigned long)high_memory - 1));
+
+	if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) &&
+	    hyp_idmap_start <  kern_hyp_va((unsigned long)high_memory - 1) &&
+	    hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) {
+		/*
+		 * The idmap page is intersecting with the VA space,
+		 * it is not safe to continue further.
+		 */
+		kvm_err("IDMAP intersecting with HYP VA, unable to continue\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	hyp_pgtable = kzalloc(sizeof(*hyp_pgtable), GFP_KERNEL);
+	if (!hyp_pgtable) {
+		kvm_err("Hyp mode page-table not allocated\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = kvm_pgtable_hyp_init(hyp_pgtable, *hyp_va_bits, &kvm_hyp_mm_ops);
+	if (err)
+		goto out_free_pgtable;
+
+	err = kvm_map_idmap_text();
+	if (err)
+		goto out_destroy_pgtable;
+
+	io_map_base = hyp_idmap_start;
+	return 0;
+
+out_destroy_pgtable:
+	kvm_pgtable_hyp_destroy(hyp_pgtable);
+out_free_pgtable:
+	kfree(hyp_pgtable);
+	hyp_pgtable = NULL;
+out:
+	return err;
+}
+
+void kvm_arch_commit_memory_region(struct kvm *kvm,
+				   struct kvm_memory_slot *old,
+				   const struct kvm_memory_slot *new,
+				   enum kvm_mr_change change)
+{
+	bool log_dirty_pages = new && new->flags & KVM_MEM_LOG_DIRTY_PAGES;
+
+	/*
+	 * At this point memslot has been committed and there is an
+	 * allocated dirty_bitmap[], dirty pages will be tracked while the
+	 * memory slot is write protected.
+	 */
+	if (log_dirty_pages) {
+
+		if (change == KVM_MR_DELETE)
+			return;
+
+		/*
+		 * Huge and normal pages are write-protected and split
+		 * on either of these two cases:
+		 *
+		 * 1. with initial-all-set: gradually with CLEAR ioctls,
+		 */
+		if (kvm_dirty_log_manual_protect_and_init_set(kvm))
+			return;
+		/*
+		 * or
+		 * 2. without initial-all-set: all in one shot when
+		 *    enabling dirty logging.
+		 */
+		kvm_mmu_wp_memory_region(kvm, new->id);
+		kvm_mmu_split_memory_region(kvm, new->id);
+	} else {
+		/*
+		 * Free any leftovers from the eager page splitting cache. Do
+		 * this when deleting, moving, disabling dirty logging, or
+		 * creating the memslot (a nop). Doing it for deletes makes
+		 * sure we don't leak memory, and there's no need to keep the
+		 * cache around for any of the other cases.
+		 */
+		kvm_mmu_free_memory_cache(&kvm->arch.mmu.split_page_cache);
+	}
+}
+
+int kvm_arch_prepare_memory_region(struct kvm *kvm,
+				   const struct kvm_memory_slot *old,
+				   struct kvm_memory_slot *new,
+				   enum kvm_mr_change change)
+{
+	hva_t hva, reg_end;
+	int ret = 0;
+
+	if (change != KVM_MR_CREATE && change != KVM_MR_MOVE &&
+			change != KVM_MR_FLAGS_ONLY)
+		return 0;
+
+	/*
+	 * Prevent userspace from creating a memory region outside of the IPA
+	 * space addressable by the KVM guest IPA space.
+	 */
+	if ((new->base_gfn + new->npages) > (kvm_phys_size(kvm) >> PAGE_SHIFT))
+		return -EFAULT;
+
+	hva = new->userspace_addr;
+	reg_end = hva + (new->npages << PAGE_SHIFT);
+
+	mmap_read_lock(current->mm);
+	/*
+	 * A memory region could potentially cover multiple VMAs, and any holes
+	 * between them, so iterate over all of them.
+	 *
+	 *     +--------------------------------------------+
+	 * +---------------+----------------+   +----------------+
+	 * |   : VMA 1     |      VMA 2     |   |    VMA 3  :    |
+	 * +---------------+----------------+   +----------------+
+	 *     |               memory region                |
+	 *     +--------------------------------------------+
+	 */
+	do {
+		struct vm_area_struct *vma;
+
+		vma = find_vma_intersection(current->mm, hva, reg_end);
+		if (!vma)
+			break;
+
+		if (kvm_has_mte(kvm) && !kvm_vma_mte_allowed(vma)) {
+			ret = -EINVAL;
+			break;
+		}
+
+		if (vma->vm_flags & VM_PFNMAP) {
+			/* IO region dirty page logging not allowed */
+			if (new->flags & KVM_MEM_LOG_DIRTY_PAGES) {
+				ret = -EINVAL;
+				break;
+			}
+		}
+		hva = min(reg_end, vma->vm_end);
+	} while (hva < reg_end);
+
+	mmap_read_unlock(current->mm);
+	return ret;
+}
+
+void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *slot)
+{
+}
+
+void kvm_arch_memslots_updated(struct kvm *kvm, u64 gen)
+{
+}
+
+void kvm_arch_flush_shadow_all(struct kvm *kvm)
+{
+	kvm_uninit_stage2_mmu(kvm);
+}
+
+void kvm_arch_flush_shadow_memslot(struct kvm *kvm,
+				   struct kvm_memory_slot *slot)
+{
+	gpa_t gpa = slot->base_gfn << PAGE_SHIFT;
+	phys_addr_t size = slot->npages << PAGE_SHIFT;
+
+	write_lock(&kvm->mmu_lock);
+	unmap_stage2_range(&kvm->arch.mmu, gpa, size);
+	write_unlock(&kvm->mmu_lock);
+}
+
+/*
+ * See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
+ *
+ * Main problems:
+ * - S/W ops are local to a CPU (not broadcast)
+ * - We have line migration behind our back (speculation)
+ * - System caches don't support S/W at all (damn!)
+ *
+ * In the face of the above, the best we can do is to try and convert
+ * S/W ops to VA ops. Because the guest is not allowed to infer the
+ * S/W to PA mapping, it can only use S/W to nuke the whole cache,
+ * which is a rather good thing for us.
+ *
+ * Also, it is only used when turning caches on/off ("The expected
+ * usage of the cache maintenance instructions that operate by set/way
+ * is associated with the cache maintenance instructions associated
+ * with the powerdown and powerup of caches, if this is required by
+ * the implementation.").
+ *
+ * We use the following policy:
+ *
+ * - If we trap a S/W operation, we enable VM trapping to detect
+ *   caches being turned on/off, and do a full clean.
+ *
+ * - We flush the caches on both caches being turned on and off.
+ *
+ * - Once the caches are enabled, we stop trapping VM ops.
+ */
+void kvm_set_way_flush(struct kvm_vcpu *vcpu)
+{
+	unsigned long hcr = *vcpu_hcr(vcpu);
+
+	/*
+	 * If this is the first time we do a S/W operation
+	 * (i.e. HCR_TVM not set) flush the whole memory, and set the
+	 * VM trapping.
+	 *
+	 * Otherwise, rely on the VM trapping to wait for the MMU +
+	 * Caches to be turned off. At that point, we'll be able to
+	 * clean the caches again.
+	 */
+	if (!(hcr & HCR_TVM)) {
+		trace_kvm_set_way_flush(*vcpu_pc(vcpu),
+					vcpu_has_cache_enabled(vcpu));
+		stage2_flush_vm(vcpu->kvm);
+		*vcpu_hcr(vcpu) = hcr | HCR_TVM;
+	}
+}
+
+void kvm_toggle_cache(struct kvm_vcpu *vcpu, bool was_enabled)
+{
+	bool now_enabled = vcpu_has_cache_enabled(vcpu);
+
+	/*
+	 * If switching the MMU+caches on, need to invalidate the caches.
+	 * If switching it off, need to clean the caches.
+	 * Clean + invalidate does the trick always.
+	 */
+	if (now_enabled != was_enabled)
+		stage2_flush_vm(vcpu->kvm);
+
+	/* Caches are now on, stop trapping VM ops (until a S/W op) */
+	if (now_enabled)
+		*vcpu_hcr(vcpu) &= ~HCR_TVM;
+
+	trace_kvm_toggle_cache(*vcpu_pc(vcpu), was_enabled, now_enabled);
+}
diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c
new file mode 100644
index 000000000..042695a21
--- /dev/null
+++ b/arch/arm64/kvm/nested.c
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 - Columbia University and Linaro Ltd.
+ * Author: Jintack Lim <jintack.lim@linaro.org>
+ */
+
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_nested.h>
+#include <asm/sysreg.h>
+
+#include "sys_regs.h"
+
+/* Protection against the sysreg repainting madness... */
+#define NV_FTR(r, f)		ID_AA64##r##_EL1_##f
+
+/*
+ * Our emulated CPU doesn't support all the possible features. For the
+ * sake of simplicity (and probably mental sanity), wipe out a number
+ * of feature bits we don't intend to support for the time being.
+ * This list should get updated as new features get added to the NV
+ * support, and new extension to the architecture.
+ */
+void access_nested_id_reg(struct kvm_vcpu *v, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	u32 id = reg_to_encoding(r);
+	u64 val, tmp;
+
+	val = p->regval;
+
+	switch (id) {
+	case SYS_ID_AA64ISAR0_EL1:
+		/* Support everything but TME, O.S. and Range TLBIs */
+		val &= ~(NV_FTR(ISAR0, TLB)		|
+			 NV_FTR(ISAR0, TME));
+		break;
+
+	case SYS_ID_AA64ISAR1_EL1:
+		/* Support everything but PtrAuth and Spec Invalidation */
+		val &= ~(GENMASK_ULL(63, 56)	|
+			 NV_FTR(ISAR1, SPECRES)	|
+			 NV_FTR(ISAR1, GPI)	|
+			 NV_FTR(ISAR1, GPA)	|
+			 NV_FTR(ISAR1, API)	|
+			 NV_FTR(ISAR1, APA));
+		break;
+
+	case SYS_ID_AA64PFR0_EL1:
+		/* No AMU, MPAM, S-EL2, RAS or SVE */
+		val &= ~(GENMASK_ULL(55, 52)	|
+			 NV_FTR(PFR0, AMU)	|
+			 NV_FTR(PFR0, MPAM)	|
+			 NV_FTR(PFR0, SEL2)	|
+			 NV_FTR(PFR0, RAS)	|
+			 NV_FTR(PFR0, SVE)	|
+			 NV_FTR(PFR0, EL3)	|
+			 NV_FTR(PFR0, EL2)	|
+			 NV_FTR(PFR0, EL1));
+		/* 64bit EL1/EL2/EL3 only */
+		val |= FIELD_PREP(NV_FTR(PFR0, EL1), 0b0001);
+		val |= FIELD_PREP(NV_FTR(PFR0, EL2), 0b0001);
+		val |= FIELD_PREP(NV_FTR(PFR0, EL3), 0b0001);
+		break;
+
+	case SYS_ID_AA64PFR1_EL1:
+		/* Only support SSBS */
+		val &= NV_FTR(PFR1, SSBS);
+		break;
+
+	case SYS_ID_AA64MMFR0_EL1:
+		/* Hide ECV, ExS, Secure Memory */
+		val &= ~(NV_FTR(MMFR0, ECV)		|
+			 NV_FTR(MMFR0, EXS)		|
+			 NV_FTR(MMFR0, TGRAN4_2)	|
+			 NV_FTR(MMFR0, TGRAN16_2)	|
+			 NV_FTR(MMFR0, TGRAN64_2)	|
+			 NV_FTR(MMFR0, SNSMEM));
+
+		/* Disallow unsupported S2 page sizes */
+		switch (PAGE_SIZE) {
+		case SZ_64K:
+			val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN16_2), 0b0001);
+			fallthrough;
+		case SZ_16K:
+			val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN4_2), 0b0001);
+			fallthrough;
+		case SZ_4K:
+			/* Support everything */
+			break;
+		}
+		/*
+		 * Since we can't support a guest S2 page size smaller than
+		 * the host's own page size (due to KVM only populating its
+		 * own S2 using the kernel's page size), advertise the
+		 * limitation using FEAT_GTG.
+		 */
+		switch (PAGE_SIZE) {
+		case SZ_4K:
+			val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN4_2), 0b0010);
+			fallthrough;
+		case SZ_16K:
+			val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN16_2), 0b0010);
+			fallthrough;
+		case SZ_64K:
+			val |= FIELD_PREP(NV_FTR(MMFR0, TGRAN64_2), 0b0010);
+			break;
+		}
+		/* Cap PARange to 48bits */
+		tmp = FIELD_GET(NV_FTR(MMFR0, PARANGE), val);
+		if (tmp > 0b0101) {
+			val &= ~NV_FTR(MMFR0, PARANGE);
+			val |= FIELD_PREP(NV_FTR(MMFR0, PARANGE), 0b0101);
+		}
+		break;
+
+	case SYS_ID_AA64MMFR1_EL1:
+		val &= (NV_FTR(MMFR1, HCX)	|
+			NV_FTR(MMFR1, PAN)	|
+			NV_FTR(MMFR1, LO)	|
+			NV_FTR(MMFR1, HPDS)	|
+			NV_FTR(MMFR1, VH)	|
+			NV_FTR(MMFR1, VMIDBits));
+		break;
+
+	case SYS_ID_AA64MMFR2_EL1:
+		val &= ~(NV_FTR(MMFR2, BBM)	|
+			 NV_FTR(MMFR2, TTL)	|
+			 GENMASK_ULL(47, 44)	|
+			 NV_FTR(MMFR2, ST)	|
+			 NV_FTR(MMFR2, CCIDX)	|
+			 NV_FTR(MMFR2, VARange));
+
+		/* Force TTL support */
+		val |= FIELD_PREP(NV_FTR(MMFR2, TTL), 0b0001);
+		break;
+
+	case SYS_ID_AA64DFR0_EL1:
+		/* Only limited support for PMU, Debug, BPs and WPs */
+		val &= (NV_FTR(DFR0, PMUVer)	|
+			NV_FTR(DFR0, WRPs)	|
+			NV_FTR(DFR0, BRPs)	|
+			NV_FTR(DFR0, DebugVer));
+
+		/* Cap Debug to ARMv8.1 */
+		tmp = FIELD_GET(NV_FTR(DFR0, DebugVer), val);
+		if (tmp > 0b0111) {
+			val &= ~NV_FTR(DFR0, DebugVer);
+			val |= FIELD_PREP(NV_FTR(DFR0, DebugVer), 0b0111);
+		}
+		break;
+
+	default:
+		/* Unknown register, just wipe it clean */
+		val = 0;
+		break;
+	}
+
+	p->regval = val;
+}
diff --git a/arch/arm64/kvm/pkvm.c b/arch/arm64/kvm/pkvm.c
new file mode 100644
index 000000000..6ff3ec18c
--- /dev/null
+++ b/arch/arm64/kvm/pkvm.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 - Google LLC
+ * Author: Quentin Perret <qperret@google.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kmemleak.h>
+#include <linux/kvm_host.h>
+#include <linux/memblock.h>
+#include <linux/mutex.h>
+#include <linux/sort.h>
+
+#include <asm/kvm_pkvm.h>
+
+#include "hyp_constants.h"
+
+DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized);
+
+static struct memblock_region *hyp_memory = kvm_nvhe_sym(hyp_memory);
+static unsigned int *hyp_memblock_nr_ptr = &kvm_nvhe_sym(hyp_memblock_nr);
+
+phys_addr_t hyp_mem_base;
+phys_addr_t hyp_mem_size;
+
+static int cmp_hyp_memblock(const void *p1, const void *p2)
+{
+	const struct memblock_region *r1 = p1;
+	const struct memblock_region *r2 = p2;
+
+	return r1->base < r2->base ? -1 : (r1->base > r2->base);
+}
+
+static void __init sort_memblock_regions(void)
+{
+	sort(hyp_memory,
+	     *hyp_memblock_nr_ptr,
+	     sizeof(struct memblock_region),
+	     cmp_hyp_memblock,
+	     NULL);
+}
+
+static int __init register_memblock_regions(void)
+{
+	struct memblock_region *reg;
+
+	for_each_mem_region(reg) {
+		if (*hyp_memblock_nr_ptr >= HYP_MEMBLOCK_REGIONS)
+			return -ENOMEM;
+
+		hyp_memory[*hyp_memblock_nr_ptr] = *reg;
+		(*hyp_memblock_nr_ptr)++;
+	}
+	sort_memblock_regions();
+
+	return 0;
+}
+
+void __init kvm_hyp_reserve(void)
+{
+	u64 hyp_mem_pages = 0;
+	int ret;
+
+	if (!is_hyp_mode_available() || is_kernel_in_hyp_mode())
+		return;
+
+	if (kvm_get_mode() != KVM_MODE_PROTECTED)
+		return;
+
+	ret = register_memblock_regions();
+	if (ret) {
+		*hyp_memblock_nr_ptr = 0;
+		kvm_err("Failed to register hyp memblocks: %d\n", ret);
+		return;
+	}
+
+	hyp_mem_pages += hyp_s1_pgtable_pages();
+	hyp_mem_pages += host_s2_pgtable_pages();
+	hyp_mem_pages += hyp_vm_table_pages();
+	hyp_mem_pages += hyp_vmemmap_pages(STRUCT_HYP_PAGE_SIZE);
+	hyp_mem_pages += hyp_ffa_proxy_pages();
+
+	/*
+	 * Try to allocate a PMD-aligned region to reduce TLB pressure once
+	 * this is unmapped from the host stage-2, and fallback to PAGE_SIZE.
+	 */
+	hyp_mem_size = hyp_mem_pages << PAGE_SHIFT;
+	hyp_mem_base = memblock_phys_alloc(ALIGN(hyp_mem_size, PMD_SIZE),
+					   PMD_SIZE);
+	if (!hyp_mem_base)
+		hyp_mem_base = memblock_phys_alloc(hyp_mem_size, PAGE_SIZE);
+	else
+		hyp_mem_size = ALIGN(hyp_mem_size, PMD_SIZE);
+
+	if (!hyp_mem_base) {
+		kvm_err("Failed to reserve hyp memory\n");
+		return;
+	}
+
+	kvm_info("Reserved %lld MiB at 0x%llx\n", hyp_mem_size >> 20,
+		 hyp_mem_base);
+}
+
+/*
+ * Allocates and donates memory for hypervisor VM structs at EL2.
+ *
+ * Allocates space for the VM state, which includes the hyp vm as well as
+ * the hyp vcpus.
+ *
+ * Stores an opaque handler in the kvm struct for future reference.
+ *
+ * Return 0 on success, negative error code on failure.
+ */
+static int __pkvm_create_hyp_vm(struct kvm *host_kvm)
+{
+	size_t pgd_sz, hyp_vm_sz, hyp_vcpu_sz;
+	struct kvm_vcpu *host_vcpu;
+	pkvm_handle_t handle;
+	void *pgd, *hyp_vm;
+	unsigned long idx;
+	int ret;
+
+	if (host_kvm->created_vcpus < 1)
+		return -EINVAL;
+
+	pgd_sz = kvm_pgtable_stage2_pgd_size(host_kvm->arch.vtcr);
+
+	/*
+	 * The PGD pages will be reclaimed using a hyp_memcache which implies
+	 * page granularity. So, use alloc_pages_exact() to get individual
+	 * refcounts.
+	 */
+	pgd = alloc_pages_exact(pgd_sz, GFP_KERNEL_ACCOUNT);
+	if (!pgd)
+		return -ENOMEM;
+
+	/* Allocate memory to donate to hyp for vm and vcpu pointers. */
+	hyp_vm_sz = PAGE_ALIGN(size_add(PKVM_HYP_VM_SIZE,
+					size_mul(sizeof(void *),
+						 host_kvm->created_vcpus)));
+	hyp_vm = alloc_pages_exact(hyp_vm_sz, GFP_KERNEL_ACCOUNT);
+	if (!hyp_vm) {
+		ret = -ENOMEM;
+		goto free_pgd;
+	}
+
+	/* Donate the VM memory to hyp and let hyp initialize it. */
+	ret = kvm_call_hyp_nvhe(__pkvm_init_vm, host_kvm, hyp_vm, pgd);
+	if (ret < 0)
+		goto free_vm;
+
+	handle = ret;
+
+	host_kvm->arch.pkvm.handle = handle;
+
+	/* Donate memory for the vcpus at hyp and initialize it. */
+	hyp_vcpu_sz = PAGE_ALIGN(PKVM_HYP_VCPU_SIZE);
+	kvm_for_each_vcpu(idx, host_vcpu, host_kvm) {
+		void *hyp_vcpu;
+
+		/* Indexing of the vcpus to be sequential starting at 0. */
+		if (WARN_ON(host_vcpu->vcpu_idx != idx)) {
+			ret = -EINVAL;
+			goto destroy_vm;
+		}
+
+		hyp_vcpu = alloc_pages_exact(hyp_vcpu_sz, GFP_KERNEL_ACCOUNT);
+		if (!hyp_vcpu) {
+			ret = -ENOMEM;
+			goto destroy_vm;
+		}
+
+		ret = kvm_call_hyp_nvhe(__pkvm_init_vcpu, handle, host_vcpu,
+					hyp_vcpu);
+		if (ret) {
+			free_pages_exact(hyp_vcpu, hyp_vcpu_sz);
+			goto destroy_vm;
+		}
+	}
+
+	return 0;
+
+destroy_vm:
+	pkvm_destroy_hyp_vm(host_kvm);
+	return ret;
+free_vm:
+	free_pages_exact(hyp_vm, hyp_vm_sz);
+free_pgd:
+	free_pages_exact(pgd, pgd_sz);
+	return ret;
+}
+
+int pkvm_create_hyp_vm(struct kvm *host_kvm)
+{
+	int ret = 0;
+
+	mutex_lock(&host_kvm->lock);
+	if (!host_kvm->arch.pkvm.handle)
+		ret = __pkvm_create_hyp_vm(host_kvm);
+	mutex_unlock(&host_kvm->lock);
+
+	return ret;
+}
+
+void pkvm_destroy_hyp_vm(struct kvm *host_kvm)
+{
+	if (host_kvm->arch.pkvm.handle) {
+		WARN_ON(kvm_call_hyp_nvhe(__pkvm_teardown_vm,
+					  host_kvm->arch.pkvm.handle));
+	}
+
+	host_kvm->arch.pkvm.handle = 0;
+	free_hyp_memcache(&host_kvm->arch.pkvm.teardown_mc);
+}
+
+int pkvm_init_host_vm(struct kvm *host_kvm)
+{
+	mutex_init(&host_kvm->lock);
+	return 0;
+}
+
+static void __init _kvm_host_prot_finalize(void *arg)
+{
+	int *err = arg;
+
+	if (WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize)))
+		WRITE_ONCE(*err, -EINVAL);
+}
+
+static int __init pkvm_drop_host_privileges(void)
+{
+	int ret = 0;
+
+	/*
+	 * Flip the static key upfront as that may no longer be possible
+	 * once the host stage 2 is installed.
+	 */
+	static_branch_enable(&kvm_protected_mode_initialized);
+	on_each_cpu(_kvm_host_prot_finalize, &ret, 1);
+	return ret;
+}
+
+static int __init finalize_pkvm(void)
+{
+	int ret;
+
+	if (!is_protected_kvm_enabled() || !is_kvm_arm_initialised())
+		return 0;
+
+	/*
+	 * Exclude HYP sections from kmemleak so that they don't get peeked
+	 * at, which would end badly once inaccessible.
+	 */
+	kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
+	kmemleak_free_part_phys(hyp_mem_base, hyp_mem_size);
+
+	ret = pkvm_drop_host_privileges();
+	if (ret)
+		pr_err("Failed to finalize Hyp protection: %d\n", ret);
+
+	return ret;
+}
+device_initcall_sync(finalize_pkvm);
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
new file mode 100644
index 000000000..6b066e04d
--- /dev/null
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -0,0 +1,1074 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Linaro Ltd.
+ * Author: Shannon Zhao <shannon.zhao@linaro.org>
+ */
+
+#include <linux/cpu.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/perf/arm_pmu.h>
+#include <linux/uaccess.h>
+#include <asm/kvm_emulate.h>
+#include <kvm/arm_pmu.h>
+#include <kvm/arm_vgic.h>
+#include <asm/arm_pmuv3.h>
+
+#define PERF_ATTR_CFG1_COUNTER_64BIT	BIT(0)
+
+DEFINE_STATIC_KEY_FALSE(kvm_arm_pmu_available);
+
+static LIST_HEAD(arm_pmus);
+static DEFINE_MUTEX(arm_pmus_lock);
+
+static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc);
+static void kvm_pmu_release_perf_event(struct kvm_pmc *pmc);
+
+static struct kvm_vcpu *kvm_pmc_to_vcpu(const struct kvm_pmc *pmc)
+{
+	return container_of(pmc, struct kvm_vcpu, arch.pmu.pmc[pmc->idx]);
+}
+
+static struct kvm_pmc *kvm_vcpu_idx_to_pmc(struct kvm_vcpu *vcpu, int cnt_idx)
+{
+	return &vcpu->arch.pmu.pmc[cnt_idx];
+}
+
+static u32 __kvm_pmu_event_mask(unsigned int pmuver)
+{
+	switch (pmuver) {
+	case ID_AA64DFR0_EL1_PMUVer_IMP:
+		return GENMASK(9, 0);
+	case ID_AA64DFR0_EL1_PMUVer_V3P1:
+	case ID_AA64DFR0_EL1_PMUVer_V3P4:
+	case ID_AA64DFR0_EL1_PMUVer_V3P5:
+	case ID_AA64DFR0_EL1_PMUVer_V3P7:
+		return GENMASK(15, 0);
+	default:		/* Shouldn't be here, just for sanity */
+		WARN_ONCE(1, "Unknown PMU version %d\n", pmuver);
+		return 0;
+	}
+}
+
+static u32 kvm_pmu_event_mask(struct kvm *kvm)
+{
+	u64 dfr0 = IDREG(kvm, SYS_ID_AA64DFR0_EL1);
+	u8 pmuver = SYS_FIELD_GET(ID_AA64DFR0_EL1, PMUVer, dfr0);
+
+	return __kvm_pmu_event_mask(pmuver);
+}
+
+/**
+ * kvm_pmc_is_64bit - determine if counter is 64bit
+ * @pmc: counter context
+ */
+static bool kvm_pmc_is_64bit(struct kvm_pmc *pmc)
+{
+	return (pmc->idx == ARMV8_PMU_CYCLE_IDX ||
+		kvm_pmu_is_3p5(kvm_pmc_to_vcpu(pmc)));
+}
+
+static bool kvm_pmc_has_64bit_overflow(struct kvm_pmc *pmc)
+{
+	u64 val = __vcpu_sys_reg(kvm_pmc_to_vcpu(pmc), PMCR_EL0);
+
+	return (pmc->idx < ARMV8_PMU_CYCLE_IDX && (val & ARMV8_PMU_PMCR_LP)) ||
+	       (pmc->idx == ARMV8_PMU_CYCLE_IDX && (val & ARMV8_PMU_PMCR_LC));
+}
+
+static bool kvm_pmu_counter_can_chain(struct kvm_pmc *pmc)
+{
+	return (!(pmc->idx & 1) && (pmc->idx + 1) < ARMV8_PMU_CYCLE_IDX &&
+		!kvm_pmc_has_64bit_overflow(pmc));
+}
+
+static u32 counter_index_to_reg(u64 idx)
+{
+	return (idx == ARMV8_PMU_CYCLE_IDX) ? PMCCNTR_EL0 : PMEVCNTR0_EL0 + idx;
+}
+
+static u32 counter_index_to_evtreg(u64 idx)
+{
+	return (idx == ARMV8_PMU_CYCLE_IDX) ? PMCCFILTR_EL0 : PMEVTYPER0_EL0 + idx;
+}
+
+static u64 kvm_pmu_get_pmc_value(struct kvm_pmc *pmc)
+{
+	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
+	u64 counter, reg, enabled, running;
+
+	reg = counter_index_to_reg(pmc->idx);
+	counter = __vcpu_sys_reg(vcpu, reg);
+
+	/*
+	 * The real counter value is equal to the value of counter register plus
+	 * the value perf event counts.
+	 */
+	if (pmc->perf_event)
+		counter += perf_event_read_value(pmc->perf_event, &enabled,
+						 &running);
+
+	if (!kvm_pmc_is_64bit(pmc))
+		counter = lower_32_bits(counter);
+
+	return counter;
+}
+
+/**
+ * kvm_pmu_get_counter_value - get PMU counter value
+ * @vcpu: The vcpu pointer
+ * @select_idx: The counter index
+ */
+u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx)
+{
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return 0;
+
+	return kvm_pmu_get_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, select_idx));
+}
+
+static void kvm_pmu_set_pmc_value(struct kvm_pmc *pmc, u64 val, bool force)
+{
+	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
+	u64 reg;
+
+	kvm_pmu_release_perf_event(pmc);
+
+	reg = counter_index_to_reg(pmc->idx);
+
+	if (vcpu_mode_is_32bit(vcpu) && pmc->idx != ARMV8_PMU_CYCLE_IDX &&
+	    !force) {
+		/*
+		 * Even with PMUv3p5, AArch32 cannot write to the top
+		 * 32bit of the counters. The only possible course of
+		 * action is to use PMCR.P, which will reset them to
+		 * 0 (the only use of the 'force' parameter).
+		 */
+		val  = __vcpu_sys_reg(vcpu, reg) & GENMASK(63, 32);
+		val |= lower_32_bits(val);
+	}
+
+	__vcpu_sys_reg(vcpu, reg) = val;
+
+	/* Recreate the perf event to reflect the updated sample_period */
+	kvm_pmu_create_perf_event(pmc);
+}
+
+/**
+ * kvm_pmu_set_counter_value - set PMU counter value
+ * @vcpu: The vcpu pointer
+ * @select_idx: The counter index
+ * @val: The counter value
+ */
+void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val)
+{
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return;
+
+	kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, select_idx), val, false);
+}
+
+/**
+ * kvm_pmu_release_perf_event - remove the perf event
+ * @pmc: The PMU counter pointer
+ */
+static void kvm_pmu_release_perf_event(struct kvm_pmc *pmc)
+{
+	if (pmc->perf_event) {
+		perf_event_disable(pmc->perf_event);
+		perf_event_release_kernel(pmc->perf_event);
+		pmc->perf_event = NULL;
+	}
+}
+
+/**
+ * kvm_pmu_stop_counter - stop PMU counter
+ * @pmc: The PMU counter pointer
+ *
+ * If this counter has been configured to monitor some event, release it here.
+ */
+static void kvm_pmu_stop_counter(struct kvm_pmc *pmc)
+{
+	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
+	u64 reg, val;
+
+	if (!pmc->perf_event)
+		return;
+
+	val = kvm_pmu_get_pmc_value(pmc);
+
+	reg = counter_index_to_reg(pmc->idx);
+
+	__vcpu_sys_reg(vcpu, reg) = val;
+
+	kvm_pmu_release_perf_event(pmc);
+}
+
+/**
+ * kvm_pmu_vcpu_init - assign pmu counter idx for cpu
+ * @vcpu: The vcpu pointer
+ *
+ */
+void kvm_pmu_vcpu_init(struct kvm_vcpu *vcpu)
+{
+	int i;
+	struct kvm_pmu *pmu = &vcpu->arch.pmu;
+
+	for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++)
+		pmu->pmc[i].idx = i;
+}
+
+/**
+ * kvm_pmu_vcpu_reset - reset pmu state for cpu
+ * @vcpu: The vcpu pointer
+ *
+ */
+void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu)
+{
+	unsigned long mask = kvm_pmu_valid_counter_mask(vcpu);
+	int i;
+
+	for_each_set_bit(i, &mask, 32)
+		kvm_pmu_stop_counter(kvm_vcpu_idx_to_pmc(vcpu, i));
+}
+
+/**
+ * kvm_pmu_vcpu_destroy - free perf event of PMU for cpu
+ * @vcpu: The vcpu pointer
+ *
+ */
+void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++)
+		kvm_pmu_release_perf_event(kvm_vcpu_idx_to_pmc(vcpu, i));
+	irq_work_sync(&vcpu->arch.pmu.overflow_work);
+}
+
+u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu)
+{
+	u64 val = __vcpu_sys_reg(vcpu, PMCR_EL0) >> ARMV8_PMU_PMCR_N_SHIFT;
+
+	val &= ARMV8_PMU_PMCR_N_MASK;
+	if (val == 0)
+		return BIT(ARMV8_PMU_CYCLE_IDX);
+	else
+		return GENMASK(val - 1, 0) | BIT(ARMV8_PMU_CYCLE_IDX);
+}
+
+/**
+ * kvm_pmu_enable_counter_mask - enable selected PMU counters
+ * @vcpu: The vcpu pointer
+ * @val: the value guest writes to PMCNTENSET register
+ *
+ * Call perf_event_enable to start counting the perf event
+ */
+void kvm_pmu_enable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
+{
+	int i;
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return;
+
+	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) || !val)
+		return;
+
+	for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) {
+		struct kvm_pmc *pmc;
+
+		if (!(val & BIT(i)))
+			continue;
+
+		pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
+
+		if (!pmc->perf_event) {
+			kvm_pmu_create_perf_event(pmc);
+		} else {
+			perf_event_enable(pmc->perf_event);
+			if (pmc->perf_event->state != PERF_EVENT_STATE_ACTIVE)
+				kvm_debug("fail to enable perf event\n");
+		}
+	}
+}
+
+/**
+ * kvm_pmu_disable_counter_mask - disable selected PMU counters
+ * @vcpu: The vcpu pointer
+ * @val: the value guest writes to PMCNTENCLR register
+ *
+ * Call perf_event_disable to stop counting the perf event
+ */
+void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val)
+{
+	int i;
+
+	if (!kvm_vcpu_has_pmu(vcpu) || !val)
+		return;
+
+	for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) {
+		struct kvm_pmc *pmc;
+
+		if (!(val & BIT(i)))
+			continue;
+
+		pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
+
+		if (pmc->perf_event)
+			perf_event_disable(pmc->perf_event);
+	}
+}
+
+static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu)
+{
+	u64 reg = 0;
+
+	if ((__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E)) {
+		reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
+		reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
+		reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
+	}
+
+	return reg;
+}
+
+static void kvm_pmu_update_state(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu *pmu = &vcpu->arch.pmu;
+	bool overflow;
+
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return;
+
+	overflow = !!kvm_pmu_overflow_status(vcpu);
+	if (pmu->irq_level == overflow)
+		return;
+
+	pmu->irq_level = overflow;
+
+	if (likely(irqchip_in_kernel(vcpu->kvm))) {
+		int ret = kvm_vgic_inject_irq(vcpu->kvm, vcpu->vcpu_id,
+					      pmu->irq_num, overflow, pmu);
+		WARN_ON(ret);
+	}
+}
+
+bool kvm_pmu_should_notify_user(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu *pmu = &vcpu->arch.pmu;
+	struct kvm_sync_regs *sregs = &vcpu->run->s.regs;
+	bool run_level = sregs->device_irq_level & KVM_ARM_DEV_PMU;
+
+	if (likely(irqchip_in_kernel(vcpu->kvm)))
+		return false;
+
+	return pmu->irq_level != run_level;
+}
+
+/*
+ * Reflect the PMU overflow interrupt output level into the kvm_run structure
+ */
+void kvm_pmu_update_run(struct kvm_vcpu *vcpu)
+{
+	struct kvm_sync_regs *regs = &vcpu->run->s.regs;
+
+	/* Populate the timer bitmap for user space */
+	regs->device_irq_level &= ~KVM_ARM_DEV_PMU;
+	if (vcpu->arch.pmu.irq_level)
+		regs->device_irq_level |= KVM_ARM_DEV_PMU;
+}
+
+/**
+ * kvm_pmu_flush_hwstate - flush pmu state to cpu
+ * @vcpu: The vcpu pointer
+ *
+ * Check if the PMU has overflowed while we were running in the host, and inject
+ * an interrupt if that was the case.
+ */
+void kvm_pmu_flush_hwstate(struct kvm_vcpu *vcpu)
+{
+	kvm_pmu_update_state(vcpu);
+}
+
+/**
+ * kvm_pmu_sync_hwstate - sync pmu state from cpu
+ * @vcpu: The vcpu pointer
+ *
+ * Check if the PMU has overflowed while we were running in the guest, and
+ * inject an interrupt if that was the case.
+ */
+void kvm_pmu_sync_hwstate(struct kvm_vcpu *vcpu)
+{
+	kvm_pmu_update_state(vcpu);
+}
+
+/**
+ * When perf interrupt is an NMI, we cannot safely notify the vcpu corresponding
+ * to the event.
+ * This is why we need a callback to do it once outside of the NMI context.
+ */
+static void kvm_pmu_perf_overflow_notify_vcpu(struct irq_work *work)
+{
+	struct kvm_vcpu *vcpu;
+
+	vcpu = container_of(work, struct kvm_vcpu, arch.pmu.overflow_work);
+	kvm_vcpu_kick(vcpu);
+}
+
+/*
+ * Perform an increment on any of the counters described in @mask,
+ * generating the overflow if required, and propagate it as a chained
+ * event if possible.
+ */
+static void kvm_pmu_counter_increment(struct kvm_vcpu *vcpu,
+				      unsigned long mask, u32 event)
+{
+	int i;
+
+	if (!(__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E))
+		return;
+
+	/* Weed out disabled counters */
+	mask &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
+
+	for_each_set_bit(i, &mask, ARMV8_PMU_CYCLE_IDX) {
+		struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, i);
+		u64 type, reg;
+
+		/* Filter on event type */
+		type = __vcpu_sys_reg(vcpu, counter_index_to_evtreg(i));
+		type &= kvm_pmu_event_mask(vcpu->kvm);
+		if (type != event)
+			continue;
+
+		/* Increment this counter */
+		reg = __vcpu_sys_reg(vcpu, counter_index_to_reg(i)) + 1;
+		if (!kvm_pmc_is_64bit(pmc))
+			reg = lower_32_bits(reg);
+		__vcpu_sys_reg(vcpu, counter_index_to_reg(i)) = reg;
+
+		/* No overflow? move on */
+		if (kvm_pmc_has_64bit_overflow(pmc) ? reg : lower_32_bits(reg))
+			continue;
+
+		/* Mark overflow */
+		__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(i);
+
+		if (kvm_pmu_counter_can_chain(pmc))
+			kvm_pmu_counter_increment(vcpu, BIT(i + 1),
+						  ARMV8_PMUV3_PERFCTR_CHAIN);
+	}
+}
+
+/* Compute the sample period for a given counter value */
+static u64 compute_period(struct kvm_pmc *pmc, u64 counter)
+{
+	u64 val;
+
+	if (kvm_pmc_is_64bit(pmc) && kvm_pmc_has_64bit_overflow(pmc))
+		val = (-counter) & GENMASK(63, 0);
+	else
+		val = (-counter) & GENMASK(31, 0);
+
+	return val;
+}
+
+/**
+ * When the perf event overflows, set the overflow status and inform the vcpu.
+ */
+static void kvm_pmu_perf_overflow(struct perf_event *perf_event,
+				  struct perf_sample_data *data,
+				  struct pt_regs *regs)
+{
+	struct kvm_pmc *pmc = perf_event->overflow_handler_context;
+	struct arm_pmu *cpu_pmu = to_arm_pmu(perf_event->pmu);
+	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
+	int idx = pmc->idx;
+	u64 period;
+
+	cpu_pmu->pmu.stop(perf_event, PERF_EF_UPDATE);
+
+	/*
+	 * Reset the sample period to the architectural limit,
+	 * i.e. the point where the counter overflows.
+	 */
+	period = compute_period(pmc, local64_read(&perf_event->count));
+
+	local64_set(&perf_event->hw.period_left, 0);
+	perf_event->attr.sample_period = period;
+	perf_event->hw.sample_period = period;
+
+	__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= BIT(idx);
+
+	if (kvm_pmu_counter_can_chain(pmc))
+		kvm_pmu_counter_increment(vcpu, BIT(idx + 1),
+					  ARMV8_PMUV3_PERFCTR_CHAIN);
+
+	if (kvm_pmu_overflow_status(vcpu)) {
+		kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+
+		if (!in_nmi())
+			kvm_vcpu_kick(vcpu);
+		else
+			irq_work_queue(&vcpu->arch.pmu.overflow_work);
+	}
+
+	cpu_pmu->pmu.start(perf_event, PERF_EF_RELOAD);
+}
+
+/**
+ * kvm_pmu_software_increment - do software increment
+ * @vcpu: The vcpu pointer
+ * @val: the value guest writes to PMSWINC register
+ */
+void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val)
+{
+	kvm_pmu_counter_increment(vcpu, val, ARMV8_PMUV3_PERFCTR_SW_INCR);
+}
+
+/**
+ * kvm_pmu_handle_pmcr - handle PMCR register
+ * @vcpu: The vcpu pointer
+ * @val: the value guest writes to PMCR register
+ */
+void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
+{
+	int i;
+
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return;
+
+	/* Fixup PMCR_EL0 to reconcile the PMU version and the LP bit */
+	if (!kvm_pmu_is_3p5(vcpu))
+		val &= ~ARMV8_PMU_PMCR_LP;
+
+	/* The reset bits don't indicate any state, and shouldn't be saved. */
+	__vcpu_sys_reg(vcpu, PMCR_EL0) = val & ~(ARMV8_PMU_PMCR_C | ARMV8_PMU_PMCR_P);
+
+	if (val & ARMV8_PMU_PMCR_E) {
+		kvm_pmu_enable_counter_mask(vcpu,
+		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
+	} else {
+		kvm_pmu_disable_counter_mask(vcpu,
+		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
+	}
+
+	if (val & ARMV8_PMU_PMCR_C)
+		kvm_pmu_set_counter_value(vcpu, ARMV8_PMU_CYCLE_IDX, 0);
+
+	if (val & ARMV8_PMU_PMCR_P) {
+		unsigned long mask = kvm_pmu_valid_counter_mask(vcpu);
+		mask &= ~BIT(ARMV8_PMU_CYCLE_IDX);
+		for_each_set_bit(i, &mask, 32)
+			kvm_pmu_set_pmc_value(kvm_vcpu_idx_to_pmc(vcpu, i), 0, true);
+	}
+	kvm_vcpu_pmu_restore_guest(vcpu);
+}
+
+static bool kvm_pmu_counter_is_enabled(struct kvm_pmc *pmc)
+{
+	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
+	return (__vcpu_sys_reg(vcpu, PMCR_EL0) & ARMV8_PMU_PMCR_E) &&
+	       (__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & BIT(pmc->idx));
+}
+
+/**
+ * kvm_pmu_create_perf_event - create a perf event for a counter
+ * @pmc: Counter context
+ */
+static void kvm_pmu_create_perf_event(struct kvm_pmc *pmc)
+{
+	struct kvm_vcpu *vcpu = kvm_pmc_to_vcpu(pmc);
+	struct arm_pmu *arm_pmu = vcpu->kvm->arch.arm_pmu;
+	struct perf_event *event;
+	struct perf_event_attr attr;
+	u64 eventsel, reg, data;
+
+	reg = counter_index_to_evtreg(pmc->idx);
+	data = __vcpu_sys_reg(vcpu, reg);
+
+	kvm_pmu_stop_counter(pmc);
+	if (pmc->idx == ARMV8_PMU_CYCLE_IDX)
+		eventsel = ARMV8_PMUV3_PERFCTR_CPU_CYCLES;
+	else
+		eventsel = data & kvm_pmu_event_mask(vcpu->kvm);
+
+	/*
+	 * Neither SW increment nor chained events need to be backed
+	 * by a perf event.
+	 */
+	if (eventsel == ARMV8_PMUV3_PERFCTR_SW_INCR ||
+	    eventsel == ARMV8_PMUV3_PERFCTR_CHAIN)
+		return;
+
+	/*
+	 * If we have a filter in place and that the event isn't allowed, do
+	 * not install a perf event either.
+	 */
+	if (vcpu->kvm->arch.pmu_filter &&
+	    !test_bit(eventsel, vcpu->kvm->arch.pmu_filter))
+		return;
+
+	memset(&attr, 0, sizeof(struct perf_event_attr));
+	attr.type = arm_pmu->pmu.type;
+	attr.size = sizeof(attr);
+	attr.pinned = 1;
+	attr.disabled = !kvm_pmu_counter_is_enabled(pmc);
+	attr.exclude_user = data & ARMV8_PMU_EXCLUDE_EL0 ? 1 : 0;
+	attr.exclude_kernel = data & ARMV8_PMU_EXCLUDE_EL1 ? 1 : 0;
+	attr.exclude_hv = 1; /* Don't count EL2 events */
+	attr.exclude_host = 1; /* Don't count host events */
+	attr.config = eventsel;
+
+	/*
+	 * If counting with a 64bit counter, advertise it to the perf
+	 * code, carefully dealing with the initial sample period
+	 * which also depends on the overflow.
+	 */
+	if (kvm_pmc_is_64bit(pmc))
+		attr.config1 |= PERF_ATTR_CFG1_COUNTER_64BIT;
+
+	attr.sample_period = compute_period(pmc, kvm_pmu_get_pmc_value(pmc));
+
+	event = perf_event_create_kernel_counter(&attr, -1, current,
+						 kvm_pmu_perf_overflow, pmc);
+
+	if (IS_ERR(event)) {
+		pr_err_once("kvm: pmu event creation failed %ld\n",
+			    PTR_ERR(event));
+		return;
+	}
+
+	pmc->perf_event = event;
+}
+
+/**
+ * kvm_pmu_set_counter_event_type - set selected counter to monitor some event
+ * @vcpu: The vcpu pointer
+ * @data: The data guest writes to PMXEVTYPER_EL0
+ * @select_idx: The number of selected counter
+ *
+ * When OS accesses PMXEVTYPER_EL0, that means it wants to set a PMC to count an
+ * event with given hardware event number. Here we call perf_event API to
+ * emulate this action and create a kernel perf event for it.
+ */
+void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data,
+				    u64 select_idx)
+{
+	struct kvm_pmc *pmc = kvm_vcpu_idx_to_pmc(vcpu, select_idx);
+	u64 reg, mask;
+
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return;
+
+	mask  =  ARMV8_PMU_EVTYPE_MASK;
+	mask &= ~ARMV8_PMU_EVTYPE_EVENT;
+	mask |= kvm_pmu_event_mask(vcpu->kvm);
+
+	reg = counter_index_to_evtreg(pmc->idx);
+
+	__vcpu_sys_reg(vcpu, reg) = data & mask;
+
+	kvm_pmu_create_perf_event(pmc);
+}
+
+void kvm_host_pmu_init(struct arm_pmu *pmu)
+{
+	struct arm_pmu_entry *entry;
+
+	/*
+	 * Check the sanitised PMU version for the system, as KVM does not
+	 * support implementations where PMUv3 exists on a subset of CPUs.
+	 */
+	if (!pmuv3_implemented(kvm_arm_pmu_get_pmuver_limit()))
+		return;
+
+	mutex_lock(&arm_pmus_lock);
+
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		goto out_unlock;
+
+	entry->arm_pmu = pmu;
+	list_add_tail(&entry->entry, &arm_pmus);
+
+	if (list_is_singular(&arm_pmus))
+		static_branch_enable(&kvm_arm_pmu_available);
+
+out_unlock:
+	mutex_unlock(&arm_pmus_lock);
+}
+
+static struct arm_pmu *kvm_pmu_probe_armpmu(void)
+{
+	struct arm_pmu *tmp, *pmu = NULL;
+	struct arm_pmu_entry *entry;
+	int cpu;
+
+	mutex_lock(&arm_pmus_lock);
+
+	/*
+	 * It is safe to use a stale cpu to iterate the list of PMUs so long as
+	 * the same value is used for the entirety of the loop. Given this, and
+	 * the fact that no percpu data is used for the lookup there is no need
+	 * to disable preemption.
+	 *
+	 * It is still necessary to get a valid cpu, though, to probe for the
+	 * default PMU instance as userspace is not required to specify a PMU
+	 * type. In order to uphold the preexisting behavior KVM selects the
+	 * PMU instance for the core where the first call to the
+	 * KVM_ARM_VCPU_PMU_V3_CTRL attribute group occurs. A dependent use case
+	 * would be a user with disdain of all things big.LITTLE that affines
+	 * the VMM to a particular cluster of cores.
+	 *
+	 * In any case, userspace should just do the sane thing and use the UAPI
+	 * to select a PMU type directly. But, be wary of the baggage being
+	 * carried here.
+	 */
+	cpu = raw_smp_processor_id();
+	list_for_each_entry(entry, &arm_pmus, entry) {
+		tmp = entry->arm_pmu;
+
+		if (cpumask_test_cpu(cpu, &tmp->supported_cpus)) {
+			pmu = tmp;
+			break;
+		}
+	}
+
+	mutex_unlock(&arm_pmus_lock);
+
+	return pmu;
+}
+
+u64 kvm_pmu_get_pmceid(struct kvm_vcpu *vcpu, bool pmceid1)
+{
+	unsigned long *bmap = vcpu->kvm->arch.pmu_filter;
+	u64 val, mask = 0;
+	int base, i, nr_events;
+
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return 0;
+
+	if (!pmceid1) {
+		val = read_sysreg(pmceid0_el0);
+		/* always support CHAIN */
+		val |= BIT(ARMV8_PMUV3_PERFCTR_CHAIN);
+		base = 0;
+	} else {
+		val = read_sysreg(pmceid1_el0);
+		/*
+		 * Don't advertise STALL_SLOT*, as PMMIR_EL0 is handled
+		 * as RAZ
+		 */
+		val &= ~(BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT - 32) |
+			 BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND - 32) |
+			 BIT_ULL(ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND - 32));
+		base = 32;
+	}
+
+	if (!bmap)
+		return val;
+
+	nr_events = kvm_pmu_event_mask(vcpu->kvm) + 1;
+
+	for (i = 0; i < 32; i += 8) {
+		u64 byte;
+
+		byte = bitmap_get_value8(bmap, base + i);
+		mask |= byte << i;
+		if (nr_events >= (0x4000 + base + 32)) {
+			byte = bitmap_get_value8(bmap, 0x4000 + base + i);
+			mask |= byte << (32 + i);
+		}
+	}
+
+	return val & mask;
+}
+
+int kvm_arm_pmu_v3_enable(struct kvm_vcpu *vcpu)
+{
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return 0;
+
+	if (!vcpu->arch.pmu.created)
+		return -EINVAL;
+
+	/*
+	 * A valid interrupt configuration for the PMU is either to have a
+	 * properly configured interrupt number and using an in-kernel
+	 * irqchip, or to not have an in-kernel GIC and not set an IRQ.
+	 */
+	if (irqchip_in_kernel(vcpu->kvm)) {
+		int irq = vcpu->arch.pmu.irq_num;
+		/*
+		 * If we are using an in-kernel vgic, at this point we know
+		 * the vgic will be initialized, so we can check the PMU irq
+		 * number against the dimensions of the vgic and make sure
+		 * it's valid.
+		 */
+		if (!irq_is_ppi(irq) && !vgic_valid_spi(vcpu->kvm, irq))
+			return -EINVAL;
+	} else if (kvm_arm_pmu_irq_initialized(vcpu)) {
+		   return -EINVAL;
+	}
+
+	/* One-off reload of the PMU on first run */
+	kvm_make_request(KVM_REQ_RELOAD_PMU, vcpu);
+
+	return 0;
+}
+
+static int kvm_arm_pmu_v3_init(struct kvm_vcpu *vcpu)
+{
+	if (irqchip_in_kernel(vcpu->kvm)) {
+		int ret;
+
+		/*
+		 * If using the PMU with an in-kernel virtual GIC
+		 * implementation, we require the GIC to be already
+		 * initialized when initializing the PMU.
+		 */
+		if (!vgic_initialized(vcpu->kvm))
+			return -ENODEV;
+
+		if (!kvm_arm_pmu_irq_initialized(vcpu))
+			return -ENXIO;
+
+		ret = kvm_vgic_set_owner(vcpu, vcpu->arch.pmu.irq_num,
+					 &vcpu->arch.pmu);
+		if (ret)
+			return ret;
+	}
+
+	init_irq_work(&vcpu->arch.pmu.overflow_work,
+		      kvm_pmu_perf_overflow_notify_vcpu);
+
+	vcpu->arch.pmu.created = true;
+	return 0;
+}
+
+/*
+ * For one VM the interrupt type must be same for each vcpu.
+ * As a PPI, the interrupt number is the same for all vcpus,
+ * while as an SPI it must be a separate number per vcpu.
+ */
+static bool pmu_irq_is_valid(struct kvm *kvm, int irq)
+{
+	unsigned long i;
+	struct kvm_vcpu *vcpu;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (!kvm_arm_pmu_irq_initialized(vcpu))
+			continue;
+
+		if (irq_is_ppi(irq)) {
+			if (vcpu->arch.pmu.irq_num != irq)
+				return false;
+		} else {
+			if (vcpu->arch.pmu.irq_num == irq)
+				return false;
+		}
+	}
+
+	return true;
+}
+
+static int kvm_arm_pmu_v3_set_pmu(struct kvm_vcpu *vcpu, int pmu_id)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct arm_pmu_entry *entry;
+	struct arm_pmu *arm_pmu;
+	int ret = -ENXIO;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+	mutex_lock(&arm_pmus_lock);
+
+	list_for_each_entry(entry, &arm_pmus, entry) {
+		arm_pmu = entry->arm_pmu;
+		if (arm_pmu->pmu.type == pmu_id) {
+			if (kvm_vm_has_ran_once(kvm) ||
+			    (kvm->arch.pmu_filter && kvm->arch.arm_pmu != arm_pmu)) {
+				ret = -EBUSY;
+				break;
+			}
+
+			kvm->arch.arm_pmu = arm_pmu;
+			cpumask_copy(kvm->arch.supported_cpus, &arm_pmu->supported_cpus);
+			ret = 0;
+			break;
+		}
+	}
+
+	mutex_unlock(&arm_pmus_lock);
+	return ret;
+}
+
+int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	if (!kvm_vcpu_has_pmu(vcpu))
+		return -ENODEV;
+
+	if (vcpu->arch.pmu.created)
+		return -EBUSY;
+
+	if (!kvm->arch.arm_pmu) {
+		/*
+		 * No PMU set, get the default one.
+		 *
+		 * The observant among you will notice that the supported_cpus
+		 * mask does not get updated for the default PMU even though it
+		 * is quite possible the selected instance supports only a
+		 * subset of cores in the system. This is intentional, and
+		 * upholds the preexisting behavior on heterogeneous systems
+		 * where vCPUs can be scheduled on any core but the guest
+		 * counters could stop working.
+		 */
+		kvm->arch.arm_pmu = kvm_pmu_probe_armpmu();
+		if (!kvm->arch.arm_pmu)
+			return -ENODEV;
+	}
+
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_PMU_V3_IRQ: {
+		int __user *uaddr = (int __user *)(long)attr->addr;
+		int irq;
+
+		if (!irqchip_in_kernel(kvm))
+			return -EINVAL;
+
+		if (get_user(irq, uaddr))
+			return -EFAULT;
+
+		/* The PMU overflow interrupt can be a PPI or a valid SPI. */
+		if (!(irq_is_ppi(irq) || irq_is_spi(irq)))
+			return -EINVAL;
+
+		if (!pmu_irq_is_valid(kvm, irq))
+			return -EINVAL;
+
+		if (kvm_arm_pmu_irq_initialized(vcpu))
+			return -EBUSY;
+
+		kvm_debug("Set kvm ARM PMU irq: %d\n", irq);
+		vcpu->arch.pmu.irq_num = irq;
+		return 0;
+	}
+	case KVM_ARM_VCPU_PMU_V3_FILTER: {
+		u8 pmuver = kvm_arm_pmu_get_pmuver_limit();
+		struct kvm_pmu_event_filter __user *uaddr;
+		struct kvm_pmu_event_filter filter;
+		int nr_events;
+
+		/*
+		 * Allow userspace to specify an event filter for the entire
+		 * event range supported by PMUVer of the hardware, rather
+		 * than the guest's PMUVer for KVM backward compatibility.
+		 */
+		nr_events = __kvm_pmu_event_mask(pmuver) + 1;
+
+		uaddr = (struct kvm_pmu_event_filter __user *)(long)attr->addr;
+
+		if (copy_from_user(&filter, uaddr, sizeof(filter)))
+			return -EFAULT;
+
+		if (((u32)filter.base_event + filter.nevents) > nr_events ||
+		    (filter.action != KVM_PMU_EVENT_ALLOW &&
+		     filter.action != KVM_PMU_EVENT_DENY))
+			return -EINVAL;
+
+		if (kvm_vm_has_ran_once(kvm))
+			return -EBUSY;
+
+		if (!kvm->arch.pmu_filter) {
+			kvm->arch.pmu_filter = bitmap_alloc(nr_events, GFP_KERNEL_ACCOUNT);
+			if (!kvm->arch.pmu_filter)
+				return -ENOMEM;
+
+			/*
+			 * The default depends on the first applied filter.
+			 * If it allows events, the default is to deny.
+			 * Conversely, if the first filter denies a set of
+			 * events, the default is to allow.
+			 */
+			if (filter.action == KVM_PMU_EVENT_ALLOW)
+				bitmap_zero(kvm->arch.pmu_filter, nr_events);
+			else
+				bitmap_fill(kvm->arch.pmu_filter, nr_events);
+		}
+
+		if (filter.action == KVM_PMU_EVENT_ALLOW)
+			bitmap_set(kvm->arch.pmu_filter, filter.base_event, filter.nevents);
+		else
+			bitmap_clear(kvm->arch.pmu_filter, filter.base_event, filter.nevents);
+
+		return 0;
+	}
+	case KVM_ARM_VCPU_PMU_V3_SET_PMU: {
+		int __user *uaddr = (int __user *)(long)attr->addr;
+		int pmu_id;
+
+		if (get_user(pmu_id, uaddr))
+			return -EFAULT;
+
+		return kvm_arm_pmu_v3_set_pmu(vcpu, pmu_id);
+	}
+	case KVM_ARM_VCPU_PMU_V3_INIT:
+		return kvm_arm_pmu_v3_init(vcpu);
+	}
+
+	return -ENXIO;
+}
+
+int kvm_arm_pmu_v3_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_PMU_V3_IRQ: {
+		int __user *uaddr = (int __user *)(long)attr->addr;
+		int irq;
+
+		if (!irqchip_in_kernel(vcpu->kvm))
+			return -EINVAL;
+
+		if (!kvm_vcpu_has_pmu(vcpu))
+			return -ENODEV;
+
+		if (!kvm_arm_pmu_irq_initialized(vcpu))
+			return -ENXIO;
+
+		irq = vcpu->arch.pmu.irq_num;
+		return put_user(irq, uaddr);
+	}
+	}
+
+	return -ENXIO;
+}
+
+int kvm_arm_pmu_v3_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_PMU_V3_IRQ:
+	case KVM_ARM_VCPU_PMU_V3_INIT:
+	case KVM_ARM_VCPU_PMU_V3_FILTER:
+	case KVM_ARM_VCPU_PMU_V3_SET_PMU:
+		if (kvm_vcpu_has_pmu(vcpu))
+			return 0;
+	}
+
+	return -ENXIO;
+}
+
+u8 kvm_arm_pmu_get_pmuver_limit(void)
+{
+	u64 tmp;
+
+	tmp = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+	tmp = cpuid_feature_cap_perfmon_field(tmp,
+					      ID_AA64DFR0_EL1_PMUVer_SHIFT,
+					      ID_AA64DFR0_EL1_PMUVer_V3P5);
+	return FIELD_GET(ARM64_FEATURE_MASK(ID_AA64DFR0_EL1_PMUVer), tmp);
+}
diff --git a/arch/arm64/kvm/pmu.c b/arch/arm64/kvm/pmu.c
new file mode 100644
index 000000000..a243934c5
--- /dev/null
+++ b/arch/arm64/kvm/pmu.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Arm Limited
+ * Author: Andrew Murray <Andrew.Murray@arm.com>
+ */
+#include <linux/kvm_host.h>
+#include <linux/perf_event.h>
+
+static DEFINE_PER_CPU(struct kvm_pmu_events, kvm_pmu_events);
+
+/*
+ * Given the perf event attributes and system type, determine
+ * if we are going to need to switch counters at guest entry/exit.
+ */
+static bool kvm_pmu_switch_needed(struct perf_event_attr *attr)
+{
+	/**
+	 * With VHE the guest kernel runs at EL1 and the host at EL2,
+	 * where user (EL0) is excluded then we have no reason to switch
+	 * counters.
+	 */
+	if (has_vhe() && attr->exclude_user)
+		return false;
+
+	/* Only switch if attributes are different */
+	return (attr->exclude_host != attr->exclude_guest);
+}
+
+struct kvm_pmu_events *kvm_get_pmu_events(void)
+{
+	return this_cpu_ptr(&kvm_pmu_events);
+}
+
+/*
+ * Add events to track that we may want to switch at guest entry/exit
+ * time.
+ */
+void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr)
+{
+	struct kvm_pmu_events *pmu = kvm_get_pmu_events();
+
+	if (!kvm_arm_support_pmu_v3() || !kvm_pmu_switch_needed(attr))
+		return;
+
+	if (!attr->exclude_host)
+		pmu->events_host |= set;
+	if (!attr->exclude_guest)
+		pmu->events_guest |= set;
+}
+
+/*
+ * Stop tracking events
+ */
+void kvm_clr_pmu_events(u32 clr)
+{
+	struct kvm_pmu_events *pmu = kvm_get_pmu_events();
+
+	if (!kvm_arm_support_pmu_v3())
+		return;
+
+	pmu->events_host &= ~clr;
+	pmu->events_guest &= ~clr;
+}
+
+#define PMEVTYPER_READ_CASE(idx)				\
+	case idx:						\
+		return read_sysreg(pmevtyper##idx##_el0)
+
+#define PMEVTYPER_WRITE_CASE(idx)				\
+	case idx:						\
+		write_sysreg(val, pmevtyper##idx##_el0);	\
+		break
+
+#define PMEVTYPER_CASES(readwrite)				\
+	PMEVTYPER_##readwrite##_CASE(0);			\
+	PMEVTYPER_##readwrite##_CASE(1);			\
+	PMEVTYPER_##readwrite##_CASE(2);			\
+	PMEVTYPER_##readwrite##_CASE(3);			\
+	PMEVTYPER_##readwrite##_CASE(4);			\
+	PMEVTYPER_##readwrite##_CASE(5);			\
+	PMEVTYPER_##readwrite##_CASE(6);			\
+	PMEVTYPER_##readwrite##_CASE(7);			\
+	PMEVTYPER_##readwrite##_CASE(8);			\
+	PMEVTYPER_##readwrite##_CASE(9);			\
+	PMEVTYPER_##readwrite##_CASE(10);			\
+	PMEVTYPER_##readwrite##_CASE(11);			\
+	PMEVTYPER_##readwrite##_CASE(12);			\
+	PMEVTYPER_##readwrite##_CASE(13);			\
+	PMEVTYPER_##readwrite##_CASE(14);			\
+	PMEVTYPER_##readwrite##_CASE(15);			\
+	PMEVTYPER_##readwrite##_CASE(16);			\
+	PMEVTYPER_##readwrite##_CASE(17);			\
+	PMEVTYPER_##readwrite##_CASE(18);			\
+	PMEVTYPER_##readwrite##_CASE(19);			\
+	PMEVTYPER_##readwrite##_CASE(20);			\
+	PMEVTYPER_##readwrite##_CASE(21);			\
+	PMEVTYPER_##readwrite##_CASE(22);			\
+	PMEVTYPER_##readwrite##_CASE(23);			\
+	PMEVTYPER_##readwrite##_CASE(24);			\
+	PMEVTYPER_##readwrite##_CASE(25);			\
+	PMEVTYPER_##readwrite##_CASE(26);			\
+	PMEVTYPER_##readwrite##_CASE(27);			\
+	PMEVTYPER_##readwrite##_CASE(28);			\
+	PMEVTYPER_##readwrite##_CASE(29);			\
+	PMEVTYPER_##readwrite##_CASE(30)
+
+/*
+ * Read a value direct from PMEVTYPER<idx> where idx is 0-30
+ * or PMCCFILTR_EL0 where idx is ARMV8_PMU_CYCLE_IDX (31).
+ */
+static u64 kvm_vcpu_pmu_read_evtype_direct(int idx)
+{
+	switch (idx) {
+	PMEVTYPER_CASES(READ);
+	case ARMV8_PMU_CYCLE_IDX:
+		return read_sysreg(pmccfiltr_el0);
+	default:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+
+/*
+ * Write a value direct to PMEVTYPER<idx> where idx is 0-30
+ * or PMCCFILTR_EL0 where idx is ARMV8_PMU_CYCLE_IDX (31).
+ */
+static void kvm_vcpu_pmu_write_evtype_direct(int idx, u32 val)
+{
+	switch (idx) {
+	PMEVTYPER_CASES(WRITE);
+	case ARMV8_PMU_CYCLE_IDX:
+		write_sysreg(val, pmccfiltr_el0);
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+/*
+ * Modify ARMv8 PMU events to include EL0 counting
+ */
+static void kvm_vcpu_pmu_enable_el0(unsigned long events)
+{
+	u64 typer;
+	u32 counter;
+
+	for_each_set_bit(counter, &events, 32) {
+		typer = kvm_vcpu_pmu_read_evtype_direct(counter);
+		typer &= ~ARMV8_PMU_EXCLUDE_EL0;
+		kvm_vcpu_pmu_write_evtype_direct(counter, typer);
+	}
+}
+
+/*
+ * Modify ARMv8 PMU events to exclude EL0 counting
+ */
+static void kvm_vcpu_pmu_disable_el0(unsigned long events)
+{
+	u64 typer;
+	u32 counter;
+
+	for_each_set_bit(counter, &events, 32) {
+		typer = kvm_vcpu_pmu_read_evtype_direct(counter);
+		typer |= ARMV8_PMU_EXCLUDE_EL0;
+		kvm_vcpu_pmu_write_evtype_direct(counter, typer);
+	}
+}
+
+/*
+ * On VHE ensure that only guest events have EL0 counting enabled.
+ * This is called from both vcpu_{load,put} and the sysreg handling.
+ * Since the latter is preemptible, special care must be taken to
+ * disable preemption.
+ */
+void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu_events *pmu;
+	u32 events_guest, events_host;
+
+	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+		return;
+
+	preempt_disable();
+	pmu = kvm_get_pmu_events();
+	events_guest = pmu->events_guest;
+	events_host = pmu->events_host;
+
+	kvm_vcpu_pmu_enable_el0(events_guest);
+	kvm_vcpu_pmu_disable_el0(events_host);
+	preempt_enable();
+}
+
+/*
+ * On VHE ensure that only host events have EL0 counting enabled
+ */
+void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu)
+{
+	struct kvm_pmu_events *pmu;
+	u32 events_guest, events_host;
+
+	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+		return;
+
+	pmu = kvm_get_pmu_events();
+	events_guest = pmu->events_guest;
+	events_host = pmu->events_host;
+
+	kvm_vcpu_pmu_enable_el0(events_host);
+	kvm_vcpu_pmu_disable_el0(events_guest);
+}
+
+/*
+ * With VHE, keep track of the PMUSERENR_EL0 value for the host EL0 on the pCPU
+ * where PMUSERENR_EL0 for the guest is loaded, since PMUSERENR_EL0 is switched
+ * to the value for the guest on vcpu_load().  The value for the host EL0
+ * will be restored on vcpu_put(), before returning to userspace.
+ * This isn't necessary for nVHE, as the register is context switched for
+ * every guest enter/exit.
+ *
+ * Return true if KVM takes care of the register. Otherwise return false.
+ */
+bool kvm_set_pmuserenr(u64 val)
+{
+	struct kvm_cpu_context *hctxt;
+	struct kvm_vcpu *vcpu;
+
+	if (!kvm_arm_support_pmu_v3() || !has_vhe())
+		return false;
+
+	vcpu = kvm_get_running_vcpu();
+	if (!vcpu || !vcpu_get_flag(vcpu, PMUSERENR_ON_CPU))
+		return false;
+
+	hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
+	ctxt_sys_reg(hctxt, PMUSERENR_EL0) = val;
+	return true;
+}
+
+/*
+ * If we interrupted the guest to update the host PMU context, make
+ * sure we re-apply the guest EL0 state.
+ */
+void kvm_vcpu_pmu_resync_el0(void)
+{
+	struct kvm_vcpu *vcpu;
+
+	if (!has_vhe() || !in_interrupt())
+		return;
+
+	vcpu = kvm_get_running_vcpu();
+	if (!vcpu)
+		return;
+
+	kvm_make_request(KVM_REQ_RESYNC_PMU_EL0, vcpu);
+}
diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c
new file mode 100644
index 000000000..1f69b6673
--- /dev/null
+++ b/arch/arm64/kvm/psci.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/preempt.h>
+#include <linux/kvm_host.h>
+#include <linux/uaccess.h>
+#include <linux/wait.h>
+
+#include <asm/cputype.h>
+#include <asm/kvm_emulate.h>
+
+#include <kvm/arm_psci.h>
+#include <kvm/arm_hypercalls.h>
+
+/*
+ * This is an implementation of the Power State Coordination Interface
+ * as described in ARM document number ARM DEN 0022A.
+ */
+
+#define AFFINITY_MASK(level)	~((0x1UL << ((level) * MPIDR_LEVEL_BITS)) - 1)
+
+static unsigned long psci_affinity_mask(unsigned long affinity_level)
+{
+	if (affinity_level <= 3)
+		return MPIDR_HWID_BITMASK & AFFINITY_MASK(affinity_level);
+
+	return 0;
+}
+
+static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * NOTE: For simplicity, we make VCPU suspend emulation to be
+	 * same-as WFI (Wait-for-interrupt) emulation.
+	 *
+	 * This means for KVM the wakeup events are interrupts and
+	 * this is consistent with intended use of StateID as described
+	 * in section 5.4.1 of PSCI v0.2 specification (ARM DEN 0022A).
+	 *
+	 * Further, we also treat power-down request to be same as
+	 * stand-by request as-per section 5.4.2 clause 3 of PSCI v0.2
+	 * specification (ARM DEN 0022A). This means all suspend states
+	 * for KVM will preserve the register state.
+	 */
+	kvm_vcpu_wfi(vcpu);
+
+	return PSCI_RET_SUCCESS;
+}
+
+static inline bool kvm_psci_valid_affinity(struct kvm_vcpu *vcpu,
+					   unsigned long affinity)
+{
+	return !(affinity & ~MPIDR_HWID_BITMASK);
+}
+
+static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
+{
+	struct vcpu_reset_state *reset_state;
+	struct kvm *kvm = source_vcpu->kvm;
+	struct kvm_vcpu *vcpu = NULL;
+	int ret = PSCI_RET_SUCCESS;
+	unsigned long cpu_id;
+
+	cpu_id = smccc_get_arg1(source_vcpu);
+	if (!kvm_psci_valid_affinity(source_vcpu, cpu_id))
+		return PSCI_RET_INVALID_PARAMS;
+
+	vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id);
+
+	/*
+	 * Make sure the caller requested a valid CPU and that the CPU is
+	 * turned off.
+	 */
+	if (!vcpu)
+		return PSCI_RET_INVALID_PARAMS;
+
+	spin_lock(&vcpu->arch.mp_state_lock);
+	if (!kvm_arm_vcpu_stopped(vcpu)) {
+		if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1)
+			ret = PSCI_RET_ALREADY_ON;
+		else
+			ret = PSCI_RET_INVALID_PARAMS;
+
+		goto out_unlock;
+	}
+
+	reset_state = &vcpu->arch.reset_state;
+
+	reset_state->pc = smccc_get_arg2(source_vcpu);
+
+	/* Propagate caller endianness */
+	reset_state->be = kvm_vcpu_is_be(source_vcpu);
+
+	/*
+	 * NOTE: We always update r0 (or x0) because for PSCI v0.1
+	 * the general purpose registers are undefined upon CPU_ON.
+	 */
+	reset_state->r0 = smccc_get_arg3(source_vcpu);
+
+	reset_state->reset = true;
+	kvm_make_request(KVM_REQ_VCPU_RESET, vcpu);
+
+	/*
+	 * Make sure the reset request is observed if the RUNNABLE mp_state is
+	 * observed.
+	 */
+	smp_wmb();
+
+	WRITE_ONCE(vcpu->arch.mp_state.mp_state, KVM_MP_STATE_RUNNABLE);
+	kvm_vcpu_wake_up(vcpu);
+
+out_unlock:
+	spin_unlock(&vcpu->arch.mp_state_lock);
+	return ret;
+}
+
+static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
+{
+	int matching_cpus = 0;
+	unsigned long i, mpidr;
+	unsigned long target_affinity;
+	unsigned long target_affinity_mask;
+	unsigned long lowest_affinity_level;
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_vcpu *tmp;
+
+	target_affinity = smccc_get_arg1(vcpu);
+	lowest_affinity_level = smccc_get_arg2(vcpu);
+
+	if (!kvm_psci_valid_affinity(vcpu, target_affinity))
+		return PSCI_RET_INVALID_PARAMS;
+
+	/* Determine target affinity mask */
+	target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
+	if (!target_affinity_mask)
+		return PSCI_RET_INVALID_PARAMS;
+
+	/* Ignore other bits of target affinity */
+	target_affinity &= target_affinity_mask;
+
+	/*
+	 * If one or more VCPU matching target affinity are running
+	 * then ON else OFF
+	 */
+	kvm_for_each_vcpu(i, tmp, kvm) {
+		mpidr = kvm_vcpu_get_mpidr_aff(tmp);
+		if ((mpidr & target_affinity_mask) == target_affinity) {
+			matching_cpus++;
+			if (!kvm_arm_vcpu_stopped(tmp))
+				return PSCI_0_2_AFFINITY_LEVEL_ON;
+		}
+	}
+
+	if (!matching_cpus)
+		return PSCI_RET_INVALID_PARAMS;
+
+	return PSCI_0_2_AFFINITY_LEVEL_OFF;
+}
+
+static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type, u64 flags)
+{
+	unsigned long i;
+	struct kvm_vcpu *tmp;
+
+	/*
+	 * The KVM ABI specifies that a system event exit may call KVM_RUN
+	 * again and may perform shutdown/reboot at a later time that when the
+	 * actual request is made.  Since we are implementing PSCI and a
+	 * caller of PSCI reboot and shutdown expects that the system shuts
+	 * down or reboots immediately, let's make sure that VCPUs are not run
+	 * after this call is handled and before the VCPUs have been
+	 * re-initialized.
+	 */
+	kvm_for_each_vcpu(i, tmp, vcpu->kvm) {
+		spin_lock(&tmp->arch.mp_state_lock);
+		WRITE_ONCE(tmp->arch.mp_state.mp_state, KVM_MP_STATE_STOPPED);
+		spin_unlock(&tmp->arch.mp_state_lock);
+	}
+	kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_SLEEP);
+
+	memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event));
+	vcpu->run->system_event.type = type;
+	vcpu->run->system_event.ndata = 1;
+	vcpu->run->system_event.data[0] = flags;
+	vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
+}
+
+static void kvm_psci_system_off(struct kvm_vcpu *vcpu)
+{
+	kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_SHUTDOWN, 0);
+}
+
+static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)
+{
+	kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET, 0);
+}
+
+static void kvm_psci_system_reset2(struct kvm_vcpu *vcpu)
+{
+	kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET,
+				 KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2);
+}
+
+static void kvm_psci_system_suspend(struct kvm_vcpu *vcpu)
+{
+	struct kvm_run *run = vcpu->run;
+
+	memset(&run->system_event, 0, sizeof(vcpu->run->system_event));
+	run->system_event.type = KVM_SYSTEM_EVENT_SUSPEND;
+	run->exit_reason = KVM_EXIT_SYSTEM_EVENT;
+}
+
+static void kvm_psci_narrow_to_32bit(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	/*
+	 * Zero the input registers' upper 32 bits. They will be fully
+	 * zeroed on exit, so we're fine changing them in place.
+	 */
+	for (i = 1; i < 4; i++)
+		vcpu_set_reg(vcpu, i, lower_32_bits(vcpu_get_reg(vcpu, i)));
+}
+
+static unsigned long kvm_psci_check_allowed_function(struct kvm_vcpu *vcpu, u32 fn)
+{
+	/*
+	 * Prevent 32 bit guests from calling 64 bit PSCI functions.
+	 */
+	if ((fn & PSCI_0_2_64BIT) && vcpu_mode_is_32bit(vcpu))
+		return PSCI_RET_NOT_SUPPORTED;
+
+	return 0;
+}
+
+static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
+{
+	u32 psci_fn = smccc_get_function(vcpu);
+	unsigned long val;
+	int ret = 1;
+
+	switch (psci_fn) {
+	case PSCI_0_2_FN_PSCI_VERSION:
+		/*
+		 * Bits[31:16] = Major Version = 0
+		 * Bits[15:0] = Minor Version = 2
+		 */
+		val = KVM_ARM_PSCI_0_2;
+		break;
+	case PSCI_0_2_FN_CPU_SUSPEND:
+	case PSCI_0_2_FN64_CPU_SUSPEND:
+		val = kvm_psci_vcpu_suspend(vcpu);
+		break;
+	case PSCI_0_2_FN_CPU_OFF:
+		kvm_arm_vcpu_power_off(vcpu);
+		val = PSCI_RET_SUCCESS;
+		break;
+	case PSCI_0_2_FN_CPU_ON:
+		kvm_psci_narrow_to_32bit(vcpu);
+		fallthrough;
+	case PSCI_0_2_FN64_CPU_ON:
+		val = kvm_psci_vcpu_on(vcpu);
+		break;
+	case PSCI_0_2_FN_AFFINITY_INFO:
+		kvm_psci_narrow_to_32bit(vcpu);
+		fallthrough;
+	case PSCI_0_2_FN64_AFFINITY_INFO:
+		val = kvm_psci_vcpu_affinity_info(vcpu);
+		break;
+	case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+		/*
+		 * Trusted OS is MP hence does not require migration
+	         * or
+		 * Trusted OS is not present
+		 */
+		val = PSCI_0_2_TOS_MP;
+		break;
+	case PSCI_0_2_FN_SYSTEM_OFF:
+		kvm_psci_system_off(vcpu);
+		/*
+		 * We shouldn't be going back to guest VCPU after
+		 * receiving SYSTEM_OFF request.
+		 *
+		 * If user space accidentally/deliberately resumes
+		 * guest VCPU after SYSTEM_OFF request then guest
+		 * VCPU should see internal failure from PSCI return
+		 * value. To achieve this, we preload r0 (or x0) with
+		 * PSCI return value INTERNAL_FAILURE.
+		 */
+		val = PSCI_RET_INTERNAL_FAILURE;
+		ret = 0;
+		break;
+	case PSCI_0_2_FN_SYSTEM_RESET:
+		kvm_psci_system_reset(vcpu);
+		/*
+		 * Same reason as SYSTEM_OFF for preloading r0 (or x0)
+		 * with PSCI return value INTERNAL_FAILURE.
+		 */
+		val = PSCI_RET_INTERNAL_FAILURE;
+		ret = 0;
+		break;
+	default:
+		val = PSCI_RET_NOT_SUPPORTED;
+		break;
+	}
+
+	smccc_set_retval(vcpu, val, 0, 0, 0);
+	return ret;
+}
+
+static int kvm_psci_1_x_call(struct kvm_vcpu *vcpu, u32 minor)
+{
+	unsigned long val = PSCI_RET_NOT_SUPPORTED;
+	u32 psci_fn = smccc_get_function(vcpu);
+	struct kvm *kvm = vcpu->kvm;
+	u32 arg;
+	int ret = 1;
+
+	switch(psci_fn) {
+	case PSCI_0_2_FN_PSCI_VERSION:
+		val = minor == 0 ? KVM_ARM_PSCI_1_0 : KVM_ARM_PSCI_1_1;
+		break;
+	case PSCI_1_0_FN_PSCI_FEATURES:
+		arg = smccc_get_arg1(vcpu);
+		val = kvm_psci_check_allowed_function(vcpu, arg);
+		if (val)
+			break;
+
+		val = PSCI_RET_NOT_SUPPORTED;
+
+		switch(arg) {
+		case PSCI_0_2_FN_PSCI_VERSION:
+		case PSCI_0_2_FN_CPU_SUSPEND:
+		case PSCI_0_2_FN64_CPU_SUSPEND:
+		case PSCI_0_2_FN_CPU_OFF:
+		case PSCI_0_2_FN_CPU_ON:
+		case PSCI_0_2_FN64_CPU_ON:
+		case PSCI_0_2_FN_AFFINITY_INFO:
+		case PSCI_0_2_FN64_AFFINITY_INFO:
+		case PSCI_0_2_FN_MIGRATE_INFO_TYPE:
+		case PSCI_0_2_FN_SYSTEM_OFF:
+		case PSCI_0_2_FN_SYSTEM_RESET:
+		case PSCI_1_0_FN_PSCI_FEATURES:
+		case ARM_SMCCC_VERSION_FUNC_ID:
+			val = 0;
+			break;
+		case PSCI_1_0_FN_SYSTEM_SUSPEND:
+		case PSCI_1_0_FN64_SYSTEM_SUSPEND:
+			if (test_bit(KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED, &kvm->arch.flags))
+				val = 0;
+			break;
+		case PSCI_1_1_FN_SYSTEM_RESET2:
+		case PSCI_1_1_FN64_SYSTEM_RESET2:
+			if (minor >= 1)
+				val = 0;
+			break;
+		}
+		break;
+	case PSCI_1_0_FN_SYSTEM_SUSPEND:
+		kvm_psci_narrow_to_32bit(vcpu);
+		fallthrough;
+	case PSCI_1_0_FN64_SYSTEM_SUSPEND:
+		/*
+		 * Return directly to userspace without changing the vCPU's
+		 * registers. Userspace depends on reading the SMCCC parameters
+		 * to implement SYSTEM_SUSPEND.
+		 */
+		if (test_bit(KVM_ARCH_FLAG_SYSTEM_SUSPEND_ENABLED, &kvm->arch.flags)) {
+			kvm_psci_system_suspend(vcpu);
+			return 0;
+		}
+		break;
+	case PSCI_1_1_FN_SYSTEM_RESET2:
+		kvm_psci_narrow_to_32bit(vcpu);
+		fallthrough;
+	case PSCI_1_1_FN64_SYSTEM_RESET2:
+		if (minor >= 1) {
+			arg = smccc_get_arg1(vcpu);
+
+			if (arg <= PSCI_1_1_RESET_TYPE_SYSTEM_WARM_RESET ||
+			    arg >= PSCI_1_1_RESET_TYPE_VENDOR_START) {
+				kvm_psci_system_reset2(vcpu);
+				vcpu_set_reg(vcpu, 0, PSCI_RET_INTERNAL_FAILURE);
+				return 0;
+			}
+
+			val = PSCI_RET_INVALID_PARAMS;
+			break;
+		}
+		break;
+	default:
+		return kvm_psci_0_2_call(vcpu);
+	}
+
+	smccc_set_retval(vcpu, val, 0, 0, 0);
+	return ret;
+}
+
+static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
+{
+	u32 psci_fn = smccc_get_function(vcpu);
+	unsigned long val;
+
+	switch (psci_fn) {
+	case KVM_PSCI_FN_CPU_OFF:
+		kvm_arm_vcpu_power_off(vcpu);
+		val = PSCI_RET_SUCCESS;
+		break;
+	case KVM_PSCI_FN_CPU_ON:
+		val = kvm_psci_vcpu_on(vcpu);
+		break;
+	default:
+		val = PSCI_RET_NOT_SUPPORTED;
+		break;
+	}
+
+	smccc_set_retval(vcpu, val, 0, 0, 0);
+	return 1;
+}
+
+/**
+ * kvm_psci_call - handle PSCI call if r0 value is in range
+ * @vcpu: Pointer to the VCPU struct
+ *
+ * Handle PSCI calls from guests through traps from HVC instructions.
+ * The calling convention is similar to SMC calls to the secure world
+ * where the function number is placed in r0.
+ *
+ * This function returns: > 0 (success), 0 (success but exit to user
+ * space), and < 0 (errors)
+ *
+ * Errors:
+ * -EINVAL: Unrecognized PSCI function
+ */
+int kvm_psci_call(struct kvm_vcpu *vcpu)
+{
+	u32 psci_fn = smccc_get_function(vcpu);
+	int version = kvm_psci_version(vcpu);
+	unsigned long val;
+
+	val = kvm_psci_check_allowed_function(vcpu, psci_fn);
+	if (val) {
+		smccc_set_retval(vcpu, val, 0, 0, 0);
+		return 1;
+	}
+
+	switch (version) {
+	case KVM_ARM_PSCI_1_1:
+		return kvm_psci_1_x_call(vcpu, 1);
+	case KVM_ARM_PSCI_1_0:
+		return kvm_psci_1_x_call(vcpu, 0);
+	case KVM_ARM_PSCI_0_2:
+		return kvm_psci_0_2_call(vcpu);
+	case KVM_ARM_PSCI_0_1:
+		return kvm_psci_0_1_call(vcpu);
+	default:
+		WARN_ONCE(1, "Unknown PSCI version %d", version);
+		smccc_set_retval(vcpu, SMCCC_RET_NOT_SUPPORTED, 0, 0, 0);
+		return 1;
+	}
+}
diff --git a/arch/arm64/kvm/pvtime.c b/arch/arm64/kvm/pvtime.c
new file mode 100644
index 000000000..4ceabaa4c
--- /dev/null
+++ b/arch/arm64/kvm/pvtime.c
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 Arm Ltd.
+
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+#include <linux/sched/stat.h>
+
+#include <asm/kvm_mmu.h>
+#include <asm/pvclock-abi.h>
+
+#include <kvm/arm_hypercalls.h>
+
+void kvm_update_stolen_time(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	u64 base = vcpu->arch.steal.base;
+	u64 last_steal = vcpu->arch.steal.last_steal;
+	u64 offset = offsetof(struct pvclock_vcpu_stolen_time, stolen_time);
+	u64 steal = 0;
+	int idx;
+
+	if (base == INVALID_GPA)
+		return;
+
+	idx = srcu_read_lock(&kvm->srcu);
+	if (!kvm_get_guest(kvm, base + offset, steal)) {
+		steal = le64_to_cpu(steal);
+		vcpu->arch.steal.last_steal = READ_ONCE(current->sched_info.run_delay);
+		steal += vcpu->arch.steal.last_steal - last_steal;
+		kvm_put_guest(kvm, base + offset, cpu_to_le64(steal));
+	}
+	srcu_read_unlock(&kvm->srcu, idx);
+}
+
+long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu)
+{
+	u32 feature = smccc_get_arg1(vcpu);
+	long val = SMCCC_RET_NOT_SUPPORTED;
+
+	switch (feature) {
+	case ARM_SMCCC_HV_PV_TIME_FEATURES:
+	case ARM_SMCCC_HV_PV_TIME_ST:
+		if (vcpu->arch.steal.base != INVALID_GPA)
+			val = SMCCC_RET_SUCCESS;
+		break;
+	}
+
+	return val;
+}
+
+gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu)
+{
+	struct pvclock_vcpu_stolen_time init_values = {};
+	struct kvm *kvm = vcpu->kvm;
+	u64 base = vcpu->arch.steal.base;
+
+	if (base == INVALID_GPA)
+		return base;
+
+	/*
+	 * Start counting stolen time from the time the guest requests
+	 * the feature enabled.
+	 */
+	vcpu->arch.steal.last_steal = current->sched_info.run_delay;
+	kvm_write_guest_lock(kvm, base, &init_values, sizeof(init_values));
+
+	return base;
+}
+
+bool kvm_arm_pvtime_supported(void)
+{
+	return !!sched_info_on();
+}
+
+int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu,
+			    struct kvm_device_attr *attr)
+{
+	u64 __user *user = (u64 __user *)attr->addr;
+	struct kvm *kvm = vcpu->kvm;
+	u64 ipa;
+	int ret = 0;
+	int idx;
+
+	if (!kvm_arm_pvtime_supported() ||
+	    attr->attr != KVM_ARM_VCPU_PVTIME_IPA)
+		return -ENXIO;
+
+	if (get_user(ipa, user))
+		return -EFAULT;
+	if (!IS_ALIGNED(ipa, 64))
+		return -EINVAL;
+	if (vcpu->arch.steal.base != INVALID_GPA)
+		return -EEXIST;
+
+	/* Check the address is in a valid memslot */
+	idx = srcu_read_lock(&kvm->srcu);
+	if (kvm_is_error_hva(gfn_to_hva(kvm, ipa >> PAGE_SHIFT)))
+		ret = -EINVAL;
+	srcu_read_unlock(&kvm->srcu, idx);
+
+	if (!ret)
+		vcpu->arch.steal.base = ipa;
+
+	return ret;
+}
+
+int kvm_arm_pvtime_get_attr(struct kvm_vcpu *vcpu,
+			    struct kvm_device_attr *attr)
+{
+	u64 __user *user = (u64 __user *)attr->addr;
+	u64 ipa;
+
+	if (!kvm_arm_pvtime_supported() ||
+	    attr->attr != KVM_ARM_VCPU_PVTIME_IPA)
+		return -ENXIO;
+
+	ipa = vcpu->arch.steal.base;
+
+	if (put_user(ipa, user))
+		return -EFAULT;
+	return 0;
+}
+
+int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->attr) {
+	case KVM_ARM_VCPU_PVTIME_IPA:
+		if (kvm_arm_pvtime_supported())
+			return 0;
+	}
+	return -ENXIO;
+}
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
new file mode 100644
index 000000000..7a65a35ee
--- /dev/null
+++ b/arch/arm64/kvm/reset.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/kvm/reset.c
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/kvm_host.h>
+#include <linux/kvm.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <kvm/arm_arch_timer.h>
+
+#include <asm/cpufeature.h>
+#include <asm/cputype.h>
+#include <asm/fpsimd.h>
+#include <asm/ptrace.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_nested.h>
+#include <asm/virt.h>
+
+/* Maximum phys_shift supported for any VM on this host */
+static u32 __ro_after_init kvm_ipa_limit;
+
+/*
+ * ARMv8 Reset Values
+ */
+#define VCPU_RESET_PSTATE_EL1	(PSR_MODE_EL1h | PSR_A_BIT | PSR_I_BIT | \
+				 PSR_F_BIT | PSR_D_BIT)
+
+#define VCPU_RESET_PSTATE_EL2	(PSR_MODE_EL2h | PSR_A_BIT | PSR_I_BIT | \
+				 PSR_F_BIT | PSR_D_BIT)
+
+#define VCPU_RESET_PSTATE_SVC	(PSR_AA32_MODE_SVC | PSR_AA32_A_BIT | \
+				 PSR_AA32_I_BIT | PSR_AA32_F_BIT)
+
+unsigned int __ro_after_init kvm_sve_max_vl;
+
+int __init kvm_arm_init_sve(void)
+{
+	if (system_supports_sve()) {
+		kvm_sve_max_vl = sve_max_virtualisable_vl();
+
+		/*
+		 * The get_sve_reg()/set_sve_reg() ioctl interface will need
+		 * to be extended with multiple register slice support in
+		 * order to support vector lengths greater than
+		 * VL_ARCH_MAX:
+		 */
+		if (WARN_ON(kvm_sve_max_vl > VL_ARCH_MAX))
+			kvm_sve_max_vl = VL_ARCH_MAX;
+
+		/*
+		 * Don't even try to make use of vector lengths that
+		 * aren't available on all CPUs, for now:
+		 */
+		if (kvm_sve_max_vl < sve_max_vl())
+			pr_warn("KVM: SVE vector length for guests limited to %u bytes\n",
+				kvm_sve_max_vl);
+	}
+
+	return 0;
+}
+
+static int kvm_vcpu_enable_sve(struct kvm_vcpu *vcpu)
+{
+	if (!system_supports_sve())
+		return -EINVAL;
+
+	vcpu->arch.sve_max_vl = kvm_sve_max_vl;
+
+	/*
+	 * Userspace can still customize the vector lengths by writing
+	 * KVM_REG_ARM64_SVE_VLS.  Allocation is deferred until
+	 * kvm_arm_vcpu_finalize(), which freezes the configuration.
+	 */
+	vcpu_set_flag(vcpu, GUEST_HAS_SVE);
+
+	return 0;
+}
+
+/*
+ * Finalize vcpu's maximum SVE vector length, allocating
+ * vcpu->arch.sve_state as necessary.
+ */
+static int kvm_vcpu_finalize_sve(struct kvm_vcpu *vcpu)
+{
+	void *buf;
+	unsigned int vl;
+	size_t reg_sz;
+	int ret;
+
+	vl = vcpu->arch.sve_max_vl;
+
+	/*
+	 * Responsibility for these properties is shared between
+	 * kvm_arm_init_sve(), kvm_vcpu_enable_sve() and
+	 * set_sve_vls().  Double-check here just to be sure:
+	 */
+	if (WARN_ON(!sve_vl_valid(vl) || vl > sve_max_virtualisable_vl() ||
+		    vl > VL_ARCH_MAX))
+		return -EIO;
+
+	reg_sz = vcpu_sve_state_size(vcpu);
+	buf = kzalloc(reg_sz, GFP_KERNEL_ACCOUNT);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = kvm_share_hyp(buf, buf + reg_sz);
+	if (ret) {
+		kfree(buf);
+		return ret;
+	}
+	
+	vcpu->arch.sve_state = buf;
+	vcpu_set_flag(vcpu, VCPU_SVE_FINALIZED);
+	return 0;
+}
+
+int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature)
+{
+	switch (feature) {
+	case KVM_ARM_VCPU_SVE:
+		if (!vcpu_has_sve(vcpu))
+			return -EINVAL;
+
+		if (kvm_arm_vcpu_sve_finalized(vcpu))
+			return -EPERM;
+
+		return kvm_vcpu_finalize_sve(vcpu);
+	}
+
+	return -EINVAL;
+}
+
+bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_has_sve(vcpu) && !kvm_arm_vcpu_sve_finalized(vcpu))
+		return false;
+
+	return true;
+}
+
+void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+	void *sve_state = vcpu->arch.sve_state;
+
+	kvm_vcpu_unshare_task_fp(vcpu);
+	kvm_unshare_hyp(vcpu, vcpu + 1);
+	if (sve_state)
+		kvm_unshare_hyp(sve_state, sve_state + vcpu_sve_state_size(vcpu));
+	kfree(sve_state);
+	kfree(vcpu->arch.ccsidr);
+}
+
+static void kvm_vcpu_reset_sve(struct kvm_vcpu *vcpu)
+{
+	if (vcpu_has_sve(vcpu))
+		memset(vcpu->arch.sve_state, 0, vcpu_sve_state_size(vcpu));
+}
+
+static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * For now make sure that both address/generic pointer authentication
+	 * features are requested by the userspace together and the system
+	 * supports these capabilities.
+	 */
+	if (!test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
+	    !test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features) ||
+	    !system_has_full_ptr_auth())
+		return -EINVAL;
+
+	vcpu_set_flag(vcpu, GUEST_HAS_PTRAUTH);
+	return 0;
+}
+
+/**
+ * kvm_reset_vcpu - sets core registers and sys_regs to reset value
+ * @vcpu: The VCPU pointer
+ *
+ * This function sets the registers on the virtual CPU struct to their
+ * architecturally defined reset values, except for registers whose reset is
+ * deferred until kvm_arm_vcpu_finalize().
+ *
+ * Note: This function can be called from two paths: The KVM_ARM_VCPU_INIT
+ * ioctl or as part of handling a request issued by another VCPU in the PSCI
+ * handling code.  In the first case, the VCPU will not be loaded, and in the
+ * second case the VCPU will be loaded.  Because this function operates purely
+ * on the memory-backed values of system registers, we want to do a full put if
+ * we were loaded (handling a request) and load the values back at the end of
+ * the function.  Otherwise we leave the state alone.  In both cases, we
+ * disable preemption around the vcpu reset as we would otherwise race with
+ * preempt notifiers which also call put/load.
+ */
+int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_reset_state reset_state;
+	int ret;
+	bool loaded;
+	u32 pstate;
+
+	spin_lock(&vcpu->arch.mp_state_lock);
+	reset_state = vcpu->arch.reset_state;
+	vcpu->arch.reset_state.reset = false;
+	spin_unlock(&vcpu->arch.mp_state_lock);
+
+	/* Reset PMU outside of the non-preemptible section */
+	kvm_pmu_vcpu_reset(vcpu);
+
+	preempt_disable();
+	loaded = (vcpu->cpu != -1);
+	if (loaded)
+		kvm_arch_vcpu_put(vcpu);
+
+	/* Disallow NV+SVE for the time being */
+	if (vcpu_has_nv(vcpu) && vcpu_has_feature(vcpu, KVM_ARM_VCPU_SVE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (!kvm_arm_vcpu_sve_finalized(vcpu)) {
+		if (test_bit(KVM_ARM_VCPU_SVE, vcpu->arch.features)) {
+			ret = kvm_vcpu_enable_sve(vcpu);
+			if (ret)
+				goto out;
+		}
+	} else {
+		kvm_vcpu_reset_sve(vcpu);
+	}
+
+	if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
+	    test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features)) {
+		if (kvm_vcpu_enable_ptrauth(vcpu)) {
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+
+	if (vcpu_el1_is_32bit(vcpu))
+		pstate = VCPU_RESET_PSTATE_SVC;
+	else if (vcpu_has_nv(vcpu))
+		pstate = VCPU_RESET_PSTATE_EL2;
+	else
+		pstate = VCPU_RESET_PSTATE_EL1;
+
+	if (kvm_vcpu_has_pmu(vcpu) && !kvm_arm_support_pmu_v3()) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Reset core registers */
+	memset(vcpu_gp_regs(vcpu), 0, sizeof(*vcpu_gp_regs(vcpu)));
+	memset(&vcpu->arch.ctxt.fp_regs, 0, sizeof(vcpu->arch.ctxt.fp_regs));
+	vcpu->arch.ctxt.spsr_abt = 0;
+	vcpu->arch.ctxt.spsr_und = 0;
+	vcpu->arch.ctxt.spsr_irq = 0;
+	vcpu->arch.ctxt.spsr_fiq = 0;
+	vcpu_gp_regs(vcpu)->pstate = pstate;
+
+	/* Reset system registers */
+	kvm_reset_sys_regs(vcpu);
+
+	/*
+	 * Additional reset state handling that PSCI may have imposed on us.
+	 * Must be done after all the sys_reg reset.
+	 */
+	if (reset_state.reset) {
+		unsigned long target_pc = reset_state.pc;
+
+		/* Gracefully handle Thumb2 entry point */
+		if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) {
+			target_pc &= ~1UL;
+			vcpu_set_thumb(vcpu);
+		}
+
+		/* Propagate caller endianness */
+		if (reset_state.be)
+			kvm_vcpu_set_be(vcpu);
+
+		*vcpu_pc(vcpu) = target_pc;
+		vcpu_set_reg(vcpu, 0, reset_state.r0);
+	}
+
+	/* Reset timer */
+	ret = kvm_timer_vcpu_reset(vcpu);
+out:
+	if (loaded)
+		kvm_arch_vcpu_load(vcpu, smp_processor_id());
+	preempt_enable();
+	return ret;
+}
+
+u32 get_kvm_ipa_limit(void)
+{
+	return kvm_ipa_limit;
+}
+
+int __init kvm_set_ipa_limit(void)
+{
+	unsigned int parange;
+	u64 mmfr0;
+
+	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
+	parange = cpuid_feature_extract_unsigned_field(mmfr0,
+				ID_AA64MMFR0_EL1_PARANGE_SHIFT);
+	/*
+	 * IPA size beyond 48 bits could not be supported
+	 * on either 4K or 16K page size. Hence let's cap
+	 * it to 48 bits, in case it's reported as larger
+	 * on the system.
+	 */
+	if (PAGE_SIZE != SZ_64K)
+		parange = min(parange, (unsigned int)ID_AA64MMFR0_EL1_PARANGE_48);
+
+	/*
+	 * Check with ARMv8.5-GTG that our PAGE_SIZE is supported at
+	 * Stage-2. If not, things will stop very quickly.
+	 */
+	switch (cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_EL1_TGRAN_2_SHIFT)) {
+	case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_NONE:
+		kvm_err("PAGE_SIZE not supported at Stage-2, giving up\n");
+		return -EINVAL;
+	case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_DEFAULT:
+		kvm_debug("PAGE_SIZE supported at Stage-2 (default)\n");
+		break;
+	case ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MIN ... ID_AA64MMFR0_EL1_TGRAN_2_SUPPORTED_MAX:
+		kvm_debug("PAGE_SIZE supported at Stage-2 (advertised)\n");
+		break;
+	default:
+		kvm_err("Unsupported value for TGRAN_2, giving up\n");
+		return -EINVAL;
+	}
+
+	kvm_ipa_limit = id_aa64mmfr0_parange_to_phys_shift(parange);
+	kvm_info("IPA Size Limit: %d bits%s\n", kvm_ipa_limit,
+		 ((kvm_ipa_limit < KVM_PHYS_SHIFT) ?
+		  " (Reduced IPA size, limited VM/VMM compatibility)" : ""));
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/stacktrace.c b/arch/arm64/kvm/stacktrace.c
new file mode 100644
index 000000000..3ace5b758
--- /dev/null
+++ b/arch/arm64/kvm/stacktrace.c
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * KVM nVHE hypervisor stack tracing support.
+ *
+ * The unwinder implementation depends on the nVHE mode:
+ *
+ *   1) Non-protected nVHE mode - the host can directly access the
+ *      HYP stack pages and unwind the HYP stack in EL1. This saves having
+ *      to allocate shared buffers for the host to read the unwinded
+ *      stacktrace.
+ *
+ *   2) pKVM (protected nVHE) mode - the host cannot directly access
+ *      the HYP memory. The stack is unwinded in EL2 and dumped to a shared
+ *      buffer where the host can read and print the stacktrace.
+ *
+ * Copyright (C) 2022 Google LLC
+ */
+
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+
+#include <asm/stacktrace/nvhe.h>
+
+static struct stack_info stackinfo_get_overflow(void)
+{
+	struct kvm_nvhe_stacktrace_info *stacktrace_info
+				= this_cpu_ptr_nvhe_sym(kvm_stacktrace_info);
+	unsigned long low = (unsigned long)stacktrace_info->overflow_stack_base;
+	unsigned long high = low + OVERFLOW_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static struct stack_info stackinfo_get_overflow_kern_va(void)
+{
+	unsigned long low = (unsigned long)this_cpu_ptr_nvhe_sym(overflow_stack);
+	unsigned long high = low + OVERFLOW_STACK_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static struct stack_info stackinfo_get_hyp(void)
+{
+	struct kvm_nvhe_stacktrace_info *stacktrace_info
+				= this_cpu_ptr_nvhe_sym(kvm_stacktrace_info);
+	unsigned long low = (unsigned long)stacktrace_info->stack_base;
+	unsigned long high = low + PAGE_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+static struct stack_info stackinfo_get_hyp_kern_va(void)
+{
+	unsigned long low = (unsigned long)*this_cpu_ptr(&kvm_arm_hyp_stack_page);
+	unsigned long high = low + PAGE_SIZE;
+
+	return (struct stack_info) {
+		.low = low,
+		.high = high,
+	};
+}
+
+/*
+ * kvm_nvhe_stack_kern_va - Convert KVM nVHE HYP stack addresses to a kernel VAs
+ *
+ * The nVHE hypervisor stack is mapped in the flexible 'private' VA range, to
+ * allow for guard pages below the stack. Consequently, the fixed offset address
+ * translation macros won't work here.
+ *
+ * The kernel VA is calculated as an offset from the kernel VA of the hypervisor
+ * stack base.
+ *
+ * Returns true on success and updates @addr to its corresponding kernel VA;
+ * otherwise returns false.
+ */
+static bool kvm_nvhe_stack_kern_va(unsigned long *addr, unsigned long size)
+{
+	struct stack_info stack_hyp, stack_kern;
+
+	stack_hyp = stackinfo_get_hyp();
+	stack_kern = stackinfo_get_hyp_kern_va();
+	if (stackinfo_on_stack(&stack_hyp, *addr, size))
+		goto found;
+
+	stack_hyp = stackinfo_get_overflow();
+	stack_kern = stackinfo_get_overflow_kern_va();
+	if (stackinfo_on_stack(&stack_hyp, *addr, size))
+		goto found;
+
+	return false;
+
+found:
+	*addr = *addr - stack_hyp.low + stack_kern.low;
+	return true;
+}
+
+/*
+ * Convert a KVN nVHE HYP frame record address to a kernel VA
+ */
+static bool kvm_nvhe_stack_kern_record_va(unsigned long *addr)
+{
+	return kvm_nvhe_stack_kern_va(addr, 16);
+}
+
+static int unwind_next(struct unwind_state *state)
+{
+	/*
+	 * The FP is in the hypervisor VA space. Convert it to the kernel VA
+	 * space so it can be unwound by the regular unwind functions.
+	 */
+	if (!kvm_nvhe_stack_kern_record_va(&state->fp))
+		return -EINVAL;
+
+	return unwind_next_frame_record(state);
+}
+
+static void unwind(struct unwind_state *state,
+		   stack_trace_consume_fn consume_entry, void *cookie)
+{
+	while (1) {
+		int ret;
+
+		if (!consume_entry(cookie, state->pc))
+			break;
+		ret = unwind_next(state);
+		if (ret < 0)
+			break;
+	}
+}
+
+/*
+ * kvm_nvhe_dump_backtrace_entry - Symbolize and print an nVHE backtrace entry
+ *
+ * @arg    : the hypervisor offset, used for address translation
+ * @where  : the program counter corresponding to the stack frame
+ */
+static bool kvm_nvhe_dump_backtrace_entry(void *arg, unsigned long where)
+{
+	unsigned long va_mask = GENMASK_ULL(vabits_actual - 1, 0);
+	unsigned long hyp_offset = (unsigned long)arg;
+
+	/* Mask tags and convert to kern addr */
+	where = (where & va_mask) + hyp_offset;
+	kvm_err(" [<%016lx>] %pB\n", where, (void *)(where + kaslr_offset()));
+
+	return true;
+}
+
+static void kvm_nvhe_dump_backtrace_start(void)
+{
+	kvm_err("nVHE call trace:\n");
+}
+
+static void kvm_nvhe_dump_backtrace_end(void)
+{
+	kvm_err("---[ end nVHE call trace ]---\n");
+}
+
+/*
+ * hyp_dump_backtrace - Dump the non-protected nVHE backtrace.
+ *
+ * @hyp_offset: hypervisor offset, used for address translation.
+ *
+ * The host can directly access HYP stack pages in non-protected
+ * mode, so the unwinding is done directly from EL1. This removes
+ * the need for shared buffers between host and hypervisor for
+ * the stacktrace.
+ */
+static void hyp_dump_backtrace(unsigned long hyp_offset)
+{
+	struct kvm_nvhe_stacktrace_info *stacktrace_info;
+	struct stack_info stacks[] = {
+		stackinfo_get_overflow_kern_va(),
+		stackinfo_get_hyp_kern_va(),
+	};
+	struct unwind_state state = {
+		.stacks = stacks,
+		.nr_stacks = ARRAY_SIZE(stacks),
+	};
+
+	stacktrace_info = this_cpu_ptr_nvhe_sym(kvm_stacktrace_info);
+
+	kvm_nvhe_unwind_init(&state, stacktrace_info->fp, stacktrace_info->pc);
+
+	kvm_nvhe_dump_backtrace_start();
+	unwind(&state, kvm_nvhe_dump_backtrace_entry, (void *)hyp_offset);
+	kvm_nvhe_dump_backtrace_end();
+}
+
+#ifdef CONFIG_PROTECTED_NVHE_STACKTRACE
+DECLARE_KVM_NVHE_PER_CPU(unsigned long [NVHE_STACKTRACE_SIZE/sizeof(long)],
+			 pkvm_stacktrace);
+
+/*
+ * pkvm_dump_backtrace - Dump the protected nVHE HYP backtrace.
+ *
+ * @hyp_offset: hypervisor offset, used for address translation.
+ *
+ * Dumping of the pKVM HYP backtrace is done by reading the
+ * stack addresses from the shared stacktrace buffer, since the
+ * host cannot directly access hypervisor memory in protected
+ * mode.
+ */
+static void pkvm_dump_backtrace(unsigned long hyp_offset)
+{
+	unsigned long *stacktrace
+		= (unsigned long *) this_cpu_ptr_nvhe_sym(pkvm_stacktrace);
+	int i;
+
+	kvm_nvhe_dump_backtrace_start();
+	/* The saved stacktrace is terminated by a null entry */
+	for (i = 0;
+	     i < ARRAY_SIZE(kvm_nvhe_sym(pkvm_stacktrace)) && stacktrace[i];
+	     i++)
+		kvm_nvhe_dump_backtrace_entry((void *)hyp_offset, stacktrace[i]);
+	kvm_nvhe_dump_backtrace_end();
+}
+#else	/* !CONFIG_PROTECTED_NVHE_STACKTRACE */
+static void pkvm_dump_backtrace(unsigned long hyp_offset)
+{
+	kvm_err("Cannot dump pKVM nVHE stacktrace: !CONFIG_PROTECTED_NVHE_STACKTRACE\n");
+}
+#endif /* CONFIG_PROTECTED_NVHE_STACKTRACE */
+
+/*
+ * kvm_nvhe_dump_backtrace - Dump KVM nVHE hypervisor backtrace.
+ *
+ * @hyp_offset: hypervisor offset, used for address translation.
+ */
+void kvm_nvhe_dump_backtrace(unsigned long hyp_offset)
+{
+	if (is_protected_kvm_enabled())
+		pkvm_dump_backtrace(hyp_offset);
+	else
+		hyp_dump_backtrace(hyp_offset);
+}
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
new file mode 100644
index 000000000..0afd6136e
--- /dev/null
+++ b/arch/arm64/kvm/sys_regs.c
@@ -0,0 +1,3606 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/kvm/coproc.c:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Authors: Rusty Russell <rusty@rustcorp.com.au>
+ *          Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bsearch.h>
+#include <linux/cacheinfo.h>
+#include <linux/kvm_host.h>
+#include <linux/mm.h>
+#include <linux/printk.h>
+#include <linux/uaccess.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/debug-monitors.h>
+#include <asm/esr.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_nested.h>
+#include <asm/perf_event.h>
+#include <asm/sysreg.h>
+
+#include <trace/events/kvm.h>
+
+#include "sys_regs.h"
+
+#include "trace.h"
+
+/*
+ * For AArch32, we only take care of what is being trapped. Anything
+ * that has to do with init and userspace access has to go via the
+ * 64bit interface.
+ */
+
+static u64 sys_reg_to_index(const struct sys_reg_desc *reg);
+static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		      u64 val);
+
+static bool read_from_write_only(struct kvm_vcpu *vcpu,
+				 struct sys_reg_params *params,
+				 const struct sys_reg_desc *r)
+{
+	WARN_ONCE(1, "Unexpected sys_reg read to write-only register\n");
+	print_sys_reg_instr(params);
+	kvm_inject_undefined(vcpu);
+	return false;
+}
+
+static bool write_to_read_only(struct kvm_vcpu *vcpu,
+			       struct sys_reg_params *params,
+			       const struct sys_reg_desc *r)
+{
+	WARN_ONCE(1, "Unexpected sys_reg write to read-only register\n");
+	print_sys_reg_instr(params);
+	kvm_inject_undefined(vcpu);
+	return false;
+}
+
+u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
+{
+	u64 val = 0x8badf00d8badf00d;
+
+	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
+	    __vcpu_read_sys_reg_from_cpu(reg, &val))
+		return val;
+
+	return __vcpu_sys_reg(vcpu, reg);
+}
+
+void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
+{
+	if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
+	    __vcpu_write_sys_reg_to_cpu(val, reg))
+		return;
+
+	__vcpu_sys_reg(vcpu, reg) = val;
+}
+
+/* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */
+#define CSSELR_MAX 14
+
+/*
+ * Returns the minimum line size for the selected cache, expressed as
+ * Log2(bytes).
+ */
+static u8 get_min_cache_line_size(bool icache)
+{
+	u64 ctr = read_sanitised_ftr_reg(SYS_CTR_EL0);
+	u8 field;
+
+	if (icache)
+		field = SYS_FIELD_GET(CTR_EL0, IminLine, ctr);
+	else
+		field = SYS_FIELD_GET(CTR_EL0, DminLine, ctr);
+
+	/*
+	 * Cache line size is represented as Log2(words) in CTR_EL0.
+	 * Log2(bytes) can be derived with the following:
+	 *
+	 * Log2(words) + 2 = Log2(bytes / 4) + 2
+	 * 		   = Log2(bytes) - 2 + 2
+	 * 		   = Log2(bytes)
+	 */
+	return field + 2;
+}
+
+/* Which cache CCSIDR represents depends on CSSELR value. */
+static u32 get_ccsidr(struct kvm_vcpu *vcpu, u32 csselr)
+{
+	u8 line_size;
+
+	if (vcpu->arch.ccsidr)
+		return vcpu->arch.ccsidr[csselr];
+
+	line_size = get_min_cache_line_size(csselr & CSSELR_EL1_InD);
+
+	/*
+	 * Fabricate a CCSIDR value as the overriding value does not exist.
+	 * The real CCSIDR value will not be used as it can vary by the
+	 * physical CPU which the vcpu currently resides in.
+	 *
+	 * The line size is determined with get_min_cache_line_size(), which
+	 * should be valid for all CPUs even if they have different cache
+	 * configuration.
+	 *
+	 * The associativity bits are cleared, meaning the geometry of all data
+	 * and unified caches (which are guaranteed to be PIPT and thus
+	 * non-aliasing) are 1 set and 1 way.
+	 * Guests should not be doing cache operations by set/way at all, and
+	 * for this reason, we trap them and attempt to infer the intent, so
+	 * that we can flush the entire guest's address space at the appropriate
+	 * time. The exposed geometry minimizes the number of the traps.
+	 * [If guests should attempt to infer aliasing properties from the
+	 * geometry (which is not permitted by the architecture), they would
+	 * only do so for virtually indexed caches.]
+	 *
+	 * We don't check if the cache level exists as it is allowed to return
+	 * an UNKNOWN value if not.
+	 */
+	return SYS_FIELD_PREP(CCSIDR_EL1, LineSize, line_size - 4);
+}
+
+static int set_ccsidr(struct kvm_vcpu *vcpu, u32 csselr, u32 val)
+{
+	u8 line_size = FIELD_GET(CCSIDR_EL1_LineSize, val) + 4;
+	u32 *ccsidr = vcpu->arch.ccsidr;
+	u32 i;
+
+	if ((val & CCSIDR_EL1_RES0) ||
+	    line_size < get_min_cache_line_size(csselr & CSSELR_EL1_InD))
+		return -EINVAL;
+
+	if (!ccsidr) {
+		if (val == get_ccsidr(vcpu, csselr))
+			return 0;
+
+		ccsidr = kmalloc_array(CSSELR_MAX, sizeof(u32), GFP_KERNEL_ACCOUNT);
+		if (!ccsidr)
+			return -ENOMEM;
+
+		for (i = 0; i < CSSELR_MAX; i++)
+			ccsidr[i] = get_ccsidr(vcpu, i);
+
+		vcpu->arch.ccsidr = ccsidr;
+	}
+
+	ccsidr[csselr] = val;
+
+	return 0;
+}
+
+static bool access_rw(struct kvm_vcpu *vcpu,
+		      struct sys_reg_params *p,
+		      const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		vcpu_write_sys_reg(vcpu, p->regval, r->reg);
+	else
+		p->regval = vcpu_read_sys_reg(vcpu, r->reg);
+
+	return true;
+}
+
+/*
+ * See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
+ */
+static bool access_dcsw(struct kvm_vcpu *vcpu,
+			struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	if (!p->is_write)
+		return read_from_write_only(vcpu, p, r);
+
+	/*
+	 * Only track S/W ops if we don't have FWB. It still indicates
+	 * that the guest is a bit broken (S/W operations should only
+	 * be done by firmware, knowing that there is only a single
+	 * CPU left in the system, and certainly not from non-secure
+	 * software).
+	 */
+	if (!cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+		kvm_set_way_flush(vcpu);
+
+	return true;
+}
+
+static bool access_dcgsw(struct kvm_vcpu *vcpu,
+			 struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	if (!kvm_has_mte(vcpu->kvm)) {
+		kvm_inject_undefined(vcpu);
+		return false;
+	}
+
+	/* Treat MTE S/W ops as we treat the classic ones: with contempt */
+	return access_dcsw(vcpu, p, r);
+}
+
+static void get_access_mask(const struct sys_reg_desc *r, u64 *mask, u64 *shift)
+{
+	switch (r->aarch32_map) {
+	case AA32_LO:
+		*mask = GENMASK_ULL(31, 0);
+		*shift = 0;
+		break;
+	case AA32_HI:
+		*mask = GENMASK_ULL(63, 32);
+		*shift = 32;
+		break;
+	default:
+		*mask = GENMASK_ULL(63, 0);
+		*shift = 0;
+		break;
+	}
+}
+
+/*
+ * Generic accessor for VM registers. Only called as long as HCR_TVM
+ * is set. If the guest enables the MMU, we stop trapping the VM
+ * sys_regs and leave it in complete control of the caches.
+ */
+static bool access_vm_reg(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	bool was_enabled = vcpu_has_cache_enabled(vcpu);
+	u64 val, mask, shift;
+
+	BUG_ON(!p->is_write);
+
+	get_access_mask(r, &mask, &shift);
+
+	if (~mask) {
+		val = vcpu_read_sys_reg(vcpu, r->reg);
+		val &= ~mask;
+	} else {
+		val = 0;
+	}
+
+	val |= (p->regval & (mask >> shift)) << shift;
+	vcpu_write_sys_reg(vcpu, val, r->reg);
+
+	kvm_toggle_cache(vcpu, was_enabled);
+	return true;
+}
+
+static bool access_actlr(struct kvm_vcpu *vcpu,
+			 struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	u64 mask, shift;
+
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	get_access_mask(r, &mask, &shift);
+	p->regval = (vcpu_read_sys_reg(vcpu, r->reg) & mask) >> shift;
+
+	return true;
+}
+
+/*
+ * Trap handler for the GICv3 SGI generation system register.
+ * Forward the request to the VGIC emulation.
+ * The cp15_64 code makes sure this automatically works
+ * for both AArch64 and AArch32 accesses.
+ */
+static bool access_gic_sgi(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	bool g1;
+
+	if (!p->is_write)
+		return read_from_write_only(vcpu, p, r);
+
+	/*
+	 * In a system where GICD_CTLR.DS=1, a ICC_SGI0R_EL1 access generates
+	 * Group0 SGIs only, while ICC_SGI1R_EL1 can generate either group,
+	 * depending on the SGI configuration. ICC_ASGI1R_EL1 is effectively
+	 * equivalent to ICC_SGI0R_EL1, as there is no "alternative" secure
+	 * group.
+	 */
+	if (p->Op0 == 0) {		/* AArch32 */
+		switch (p->Op1) {
+		default:		/* Keep GCC quiet */
+		case 0:			/* ICC_SGI1R */
+			g1 = true;
+			break;
+		case 1:			/* ICC_ASGI1R */
+		case 2:			/* ICC_SGI0R */
+			g1 = false;
+			break;
+		}
+	} else {			/* AArch64 */
+		switch (p->Op2) {
+		default:		/* Keep GCC quiet */
+		case 5:			/* ICC_SGI1R_EL1 */
+			g1 = true;
+			break;
+		case 6:			/* ICC_ASGI1R_EL1 */
+		case 7:			/* ICC_SGI0R_EL1 */
+			g1 = false;
+			break;
+		}
+	}
+
+	vgic_v3_dispatch_sgi(vcpu, p->regval, g1);
+
+	return true;
+}
+
+static bool access_gic_sre(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	p->regval = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+	return true;
+}
+
+static bool trap_raz_wi(struct kvm_vcpu *vcpu,
+			struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+	else
+		return read_zero(vcpu, p);
+}
+
+static bool trap_undef(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       const struct sys_reg_desc *r)
+{
+	kvm_inject_undefined(vcpu);
+	return false;
+}
+
+/*
+ * ARMv8.1 mandates at least a trivial LORegion implementation, where all the
+ * RW registers are RES0 (which we can implement as RAZ/WI). On an ARMv8.0
+ * system, these registers should UNDEF. LORID_EL1 being a RO register, we
+ * treat it separately.
+ */
+static bool trap_loregion(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+	u32 sr = reg_to_encoding(r);
+
+	if (!(val & (0xfUL << ID_AA64MMFR1_EL1_LO_SHIFT))) {
+		kvm_inject_undefined(vcpu);
+		return false;
+	}
+
+	if (p->is_write && sr == SYS_LORID_EL1)
+		return write_to_read_only(vcpu, p, r);
+
+	return trap_raz_wi(vcpu, p, r);
+}
+
+static bool trap_oslar_el1(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 oslsr;
+
+	if (!p->is_write)
+		return read_from_write_only(vcpu, p, r);
+
+	/* Forward the OSLK bit to OSLSR */
+	oslsr = __vcpu_sys_reg(vcpu, OSLSR_EL1) & ~OSLSR_EL1_OSLK;
+	if (p->regval & OSLAR_EL1_OSLK)
+		oslsr |= OSLSR_EL1_OSLK;
+
+	__vcpu_sys_reg(vcpu, OSLSR_EL1) = oslsr;
+	return true;
+}
+
+static bool trap_oslsr_el1(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = __vcpu_sys_reg(vcpu, r->reg);
+	return true;
+}
+
+static int set_oslsr_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			 u64 val)
+{
+	/*
+	 * The only modifiable bit is the OSLK bit. Refuse the write if
+	 * userspace attempts to change any other bit in the register.
+	 */
+	if ((val ^ rd->val) & ~OSLSR_EL1_OSLK)
+		return -EINVAL;
+
+	__vcpu_sys_reg(vcpu, rd->reg) = val;
+	return 0;
+}
+
+static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
+				   struct sys_reg_params *p,
+				   const struct sys_reg_desc *r)
+{
+	if (p->is_write) {
+		return ignore_write(vcpu, p);
+	} else {
+		p->regval = read_sysreg(dbgauthstatus_el1);
+		return true;
+	}
+}
+
+/*
+ * We want to avoid world-switching all the DBG registers all the
+ * time:
+ *
+ * - If we've touched any debug register, it is likely that we're
+ *   going to touch more of them. It then makes sense to disable the
+ *   traps and start doing the save/restore dance
+ * - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is
+ *   then mandatory to save/restore the registers, as the guest
+ *   depends on them.
+ *
+ * For this, we use a DIRTY bit, indicating the guest has modified the
+ * debug registers, used as follow:
+ *
+ * On guest entry:
+ * - If the dirty bit is set (because we're coming back from trapping),
+ *   disable the traps, save host registers, restore guest registers.
+ * - If debug is actively in use (DBG_MDSCR_KDE or DBG_MDSCR_MDE set),
+ *   set the dirty bit, disable the traps, save host registers,
+ *   restore guest registers.
+ * - Otherwise, enable the traps
+ *
+ * On guest exit:
+ * - If the dirty bit is set, save guest registers, restore host
+ *   registers and clear the dirty bit. This ensure that the host can
+ *   now use the debug registers.
+ */
+static bool trap_debug_regs(struct kvm_vcpu *vcpu,
+			    struct sys_reg_params *p,
+			    const struct sys_reg_desc *r)
+{
+	access_rw(vcpu, p, r);
+	if (p->is_write)
+		vcpu_set_flag(vcpu, DEBUG_DIRTY);
+
+	trace_trap_reg(__func__, r->reg, p->is_write, p->regval);
+
+	return true;
+}
+
+/*
+ * reg_to_dbg/dbg_to_reg
+ *
+ * A 32 bit write to a debug register leave top bits alone
+ * A 32 bit read from a debug register only returns the bottom bits
+ *
+ * All writes will set the DEBUG_DIRTY flag to ensure the hyp code
+ * switches between host and guest values in future.
+ */
+static void reg_to_dbg(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       const struct sys_reg_desc *rd,
+		       u64 *dbg_reg)
+{
+	u64 mask, shift, val;
+
+	get_access_mask(rd, &mask, &shift);
+
+	val = *dbg_reg;
+	val &= ~mask;
+	val |= (p->regval & (mask >> shift)) << shift;
+	*dbg_reg = val;
+
+	vcpu_set_flag(vcpu, DEBUG_DIRTY);
+}
+
+static void dbg_to_reg(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       const struct sys_reg_desc *rd,
+		       u64 *dbg_reg)
+{
+	u64 mask, shift;
+
+	get_access_mask(rd, &mask, &shift);
+	p->regval = (*dbg_reg & mask) >> shift;
+}
+
+static bool trap_bvr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
+{
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
+
+	if (p->is_write)
+		reg_to_dbg(vcpu, p, rd, dbg_reg);
+	else
+		dbg_to_reg(vcpu, p, rd, dbg_reg);
+
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
+
+	return true;
+}
+
+static int set_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 val)
+{
+	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = val;
+	return 0;
+}
+
+static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 *val)
+{
+	*val = vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm];
+	return 0;
+}
+
+static u64 reset_bvr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
+{
+	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->CRm] = rd->val;
+	return rd->val;
+}
+
+static bool trap_bcr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
+{
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
+
+	if (p->is_write)
+		reg_to_dbg(vcpu, p, rd, dbg_reg);
+	else
+		dbg_to_reg(vcpu, p, rd, dbg_reg);
+
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
+
+	return true;
+}
+
+static int set_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 val)
+{
+	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = val;
+	return 0;
+}
+
+static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 *val)
+{
+	*val = vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm];
+	return 0;
+}
+
+static u64 reset_bcr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
+{
+	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->CRm] = rd->val;
+	return rd->val;
+}
+
+static bool trap_wvr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
+{
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
+
+	if (p->is_write)
+		reg_to_dbg(vcpu, p, rd, dbg_reg);
+	else
+		dbg_to_reg(vcpu, p, rd, dbg_reg);
+
+	trace_trap_reg(__func__, rd->CRm, p->is_write,
+		vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm]);
+
+	return true;
+}
+
+static int set_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 val)
+{
+	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = val;
+	return 0;
+}
+
+static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 *val)
+{
+	*val = vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm];
+	return 0;
+}
+
+static u64 reset_wvr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
+{
+	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->CRm] = rd->val;
+	return rd->val;
+}
+
+static bool trap_wcr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
+{
+	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
+
+	if (p->is_write)
+		reg_to_dbg(vcpu, p, rd, dbg_reg);
+	else
+		dbg_to_reg(vcpu, p, rd, dbg_reg);
+
+	trace_trap_reg(__func__, rd->CRm, p->is_write, *dbg_reg);
+
+	return true;
+}
+
+static int set_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 val)
+{
+	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = val;
+	return 0;
+}
+
+static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		   u64 *val)
+{
+	*val = vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm];
+	return 0;
+}
+
+static u64 reset_wcr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
+{
+	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->CRm] = rd->val;
+	return rd->val;
+}
+
+static u64 reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 amair = read_sysreg(amair_el1);
+	vcpu_write_sys_reg(vcpu, amair, AMAIR_EL1);
+	return amair;
+}
+
+static u64 reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 actlr = read_sysreg(actlr_el1);
+	vcpu_write_sys_reg(vcpu, actlr, ACTLR_EL1);
+	return actlr;
+}
+
+static u64 reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 mpidr;
+
+	/*
+	 * Map the vcpu_id into the first three affinity level fields of
+	 * the MPIDR. We limit the number of VCPUs in level 0 due to a
+	 * limitation to 16 CPUs in that level in the ICC_SGIxR registers
+	 * of the GICv3 to be able to address each CPU directly when
+	 * sending IPIs.
+	 */
+	mpidr = (vcpu->vcpu_id & 0x0f) << MPIDR_LEVEL_SHIFT(0);
+	mpidr |= ((vcpu->vcpu_id >> 4) & 0xff) << MPIDR_LEVEL_SHIFT(1);
+	mpidr |= ((vcpu->vcpu_id >> 12) & 0xff) << MPIDR_LEVEL_SHIFT(2);
+	mpidr |= (1ULL << 31);
+	vcpu_write_sys_reg(vcpu, mpidr, MPIDR_EL1);
+
+	return mpidr;
+}
+
+static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *r)
+{
+	if (kvm_vcpu_has_pmu(vcpu))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+static u64 reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX);
+
+	/* No PMU available, any PMU reg may UNDEF... */
+	if (!kvm_arm_support_pmu_v3())
+		return 0;
+
+	n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT;
+	n &= ARMV8_PMU_PMCR_N_MASK;
+	if (n)
+		mask |= GENMASK(n - 1, 0);
+
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= mask;
+
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static u64 reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= GENMASK(31, 0);
+
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static u64 reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_EVTYPE_MASK;
+
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static u64 reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_COUNTER_MASK;
+
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static u64 reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 pmcr;
+
+	/* No PMU available, PMCR_EL0 may UNDEF... */
+	if (!kvm_arm_support_pmu_v3())
+		return 0;
+
+	/* Only preserve PMCR_EL0.N, and reset the rest to 0 */
+	pmcr = read_sysreg(pmcr_el0) & (ARMV8_PMU_PMCR_N_MASK << ARMV8_PMU_PMCR_N_SHIFT);
+	if (!kvm_supports_32bit_el0())
+		pmcr |= ARMV8_PMU_PMCR_LC;
+
+	__vcpu_sys_reg(vcpu, r->reg) = pmcr;
+
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags)
+{
+	u64 reg = __vcpu_sys_reg(vcpu, PMUSERENR_EL0);
+	bool enabled = (reg & flags) || vcpu_mode_priv(vcpu);
+
+	if (!enabled)
+		kvm_inject_undefined(vcpu);
+
+	return !enabled;
+}
+
+static bool pmu_access_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_EN);
+}
+
+static bool pmu_write_swinc_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_SW | ARMV8_PMU_USERENR_EN);
+}
+
+static bool pmu_access_cycle_counter_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_CR | ARMV8_PMU_USERENR_EN);
+}
+
+static bool pmu_access_event_counter_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	return check_pmu_access_disabled(vcpu, ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_EN);
+}
+
+static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	u64 val;
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write) {
+		/*
+		 * Only update writeable bits of PMCR (continuing into
+		 * kvm_pmu_handle_pmcr() as well)
+		 */
+		val = __vcpu_sys_reg(vcpu, PMCR_EL0);
+		val &= ~ARMV8_PMU_PMCR_MASK;
+		val |= p->regval & ARMV8_PMU_PMCR_MASK;
+		if (!kvm_supports_32bit_el0())
+			val |= ARMV8_PMU_PMCR_LC;
+		kvm_pmu_handle_pmcr(vcpu, val);
+	} else {
+		/* PMCR.P & PMCR.C are RAZ */
+		val = __vcpu_sys_reg(vcpu, PMCR_EL0)
+		      & ~(ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C);
+		p->regval = val;
+	}
+
+	return true;
+}
+
+static bool access_pmselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	if (pmu_access_event_counter_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write)
+		__vcpu_sys_reg(vcpu, PMSELR_EL0) = p->regval;
+	else
+		/* return PMSELR.SEL field */
+		p->regval = __vcpu_sys_reg(vcpu, PMSELR_EL0)
+			    & ARMV8_PMU_COUNTER_MASK;
+
+	return true;
+}
+
+static bool access_pmceid(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	u64 pmceid, mask, shift;
+
+	BUG_ON(p->is_write);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	get_access_mask(r, &mask, &shift);
+
+	pmceid = kvm_pmu_get_pmceid(vcpu, (p->Op2 & 1));
+	pmceid &= mask;
+	pmceid >>= shift;
+
+	p->regval = pmceid;
+
+	return true;
+}
+
+static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
+{
+	u64 pmcr, val;
+
+	pmcr = __vcpu_sys_reg(vcpu, PMCR_EL0);
+	val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) {
+		kvm_inject_undefined(vcpu);
+		return false;
+	}
+
+	return true;
+}
+
+static int get_pmu_evcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 *val)
+{
+	u64 idx;
+
+	if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 0)
+		/* PMCCNTR_EL0 */
+		idx = ARMV8_PMU_CYCLE_IDX;
+	else
+		/* PMEVCNTRn_EL0 */
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+
+	*val = kvm_pmu_get_counter_value(vcpu, idx);
+	return 0;
+}
+
+static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
+			      struct sys_reg_params *p,
+			      const struct sys_reg_desc *r)
+{
+	u64 idx = ~0UL;
+
+	if (r->CRn == 9 && r->CRm == 13) {
+		if (r->Op2 == 2) {
+			/* PMXEVCNTR_EL0 */
+			if (pmu_access_event_counter_el0_disabled(vcpu))
+				return false;
+
+			idx = __vcpu_sys_reg(vcpu, PMSELR_EL0)
+			      & ARMV8_PMU_COUNTER_MASK;
+		} else if (r->Op2 == 0) {
+			/* PMCCNTR_EL0 */
+			if (pmu_access_cycle_counter_el0_disabled(vcpu))
+				return false;
+
+			idx = ARMV8_PMU_CYCLE_IDX;
+		}
+	} else if (r->CRn == 0 && r->CRm == 9) {
+		/* PMCCNTR */
+		if (pmu_access_event_counter_el0_disabled(vcpu))
+			return false;
+
+		idx = ARMV8_PMU_CYCLE_IDX;
+	} else if (r->CRn == 14 && (r->CRm & 12) == 8) {
+		/* PMEVCNTRn_EL0 */
+		if (pmu_access_event_counter_el0_disabled(vcpu))
+			return false;
+
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+	}
+
+	/* Catch any decoding mistake */
+	WARN_ON(idx == ~0UL);
+
+	if (!pmu_counter_idx_valid(vcpu, idx))
+		return false;
+
+	if (p->is_write) {
+		if (pmu_access_el0_disabled(vcpu))
+			return false;
+
+		kvm_pmu_set_counter_value(vcpu, idx, p->regval);
+	} else {
+		p->regval = kvm_pmu_get_counter_value(vcpu, idx);
+	}
+
+	return true;
+}
+
+static bool access_pmu_evtyper(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			       const struct sys_reg_desc *r)
+{
+	u64 idx, reg;
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 1) {
+		/* PMXEVTYPER_EL0 */
+		idx = __vcpu_sys_reg(vcpu, PMSELR_EL0) & ARMV8_PMU_COUNTER_MASK;
+		reg = PMEVTYPER0_EL0 + idx;
+	} else if (r->CRn == 14 && (r->CRm & 12) == 12) {
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+		if (idx == ARMV8_PMU_CYCLE_IDX)
+			reg = PMCCFILTR_EL0;
+		else
+			/* PMEVTYPERn_EL0 */
+			reg = PMEVTYPER0_EL0 + idx;
+	} else {
+		BUG();
+	}
+
+	if (!pmu_counter_idx_valid(vcpu, idx))
+		return false;
+
+	if (p->is_write) {
+		kvm_pmu_set_counter_event_type(vcpu, p->regval, idx);
+		kvm_vcpu_pmu_restore_guest(vcpu);
+	} else {
+		p->regval = __vcpu_sys_reg(vcpu, reg) & ARMV8_PMU_EVTYPE_MASK;
+	}
+
+	return true;
+}
+
+static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 val, mask;
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	mask = kvm_pmu_valid_counter_mask(vcpu);
+	if (p->is_write) {
+		val = p->regval & mask;
+		if (r->Op2 & 0x1) {
+			/* accessing PMCNTENSET_EL0 */
+			__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val;
+			kvm_pmu_enable_counter_mask(vcpu, val);
+			kvm_vcpu_pmu_restore_guest(vcpu);
+		} else {
+			/* accessing PMCNTENCLR_EL0 */
+			__vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
+			kvm_pmu_disable_counter_mask(vcpu, val);
+		}
+	} else {
+		p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
+	}
+
+	return true;
+}
+
+static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 mask = kvm_pmu_valid_counter_mask(vcpu);
+
+	if (check_pmu_access_disabled(vcpu, 0))
+		return false;
+
+	if (p->is_write) {
+		u64 val = p->regval & mask;
+
+		if (r->Op2 & 0x1)
+			/* accessing PMINTENSET_EL1 */
+			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) |= val;
+		else
+			/* accessing PMINTENCLR_EL1 */
+			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
+	} else {
+		p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
+	}
+
+	return true;
+}
+
+static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	u64 mask = kvm_pmu_valid_counter_mask(vcpu);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write) {
+		if (r->CRm & 0x2)
+			/* accessing PMOVSSET_EL0 */
+			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) |= (p->regval & mask);
+		else
+			/* accessing PMOVSCLR_EL0 */
+			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
+	} else {
+		p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
+	}
+
+	return true;
+}
+
+static bool access_pmswinc(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 mask;
+
+	if (!p->is_write)
+		return read_from_write_only(vcpu, p, r);
+
+	if (pmu_write_swinc_el0_disabled(vcpu))
+		return false;
+
+	mask = kvm_pmu_valid_counter_mask(vcpu);
+	kvm_pmu_software_increment(vcpu, p->regval & mask);
+	return true;
+}
+
+static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			     const struct sys_reg_desc *r)
+{
+	if (p->is_write) {
+		if (!vcpu_mode_priv(vcpu)) {
+			kvm_inject_undefined(vcpu);
+			return false;
+		}
+
+		__vcpu_sys_reg(vcpu, PMUSERENR_EL0) =
+			       p->regval & ARMV8_PMU_USERENR_MASK;
+	} else {
+		p->regval = __vcpu_sys_reg(vcpu, PMUSERENR_EL0)
+			    & ARMV8_PMU_USERENR_MASK;
+	}
+
+	return true;
+}
+
+/* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
+#define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
+	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
+	  trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr },		\
+	{ SYS_DESC(SYS_DBGBCRn_EL1(n)),					\
+	  trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr },		\
+	{ SYS_DESC(SYS_DBGWVRn_EL1(n)),					\
+	  trap_wvr, reset_wvr, 0, 0,  get_wvr, set_wvr },		\
+	{ SYS_DESC(SYS_DBGWCRn_EL1(n)),					\
+	  trap_wcr, reset_wcr, 0, 0,  get_wcr, set_wcr }
+
+#define PMU_SYS_REG(name)						\
+	SYS_DESC(SYS_##name), .reset = reset_pmu_reg,			\
+	.visibility = pmu_visibility
+
+/* Macro to expand the PMEVCNTRn_EL0 register */
+#define PMU_PMEVCNTR_EL0(n)						\
+	{ PMU_SYS_REG(PMEVCNTRn_EL0(n)),				\
+	  .reset = reset_pmevcntr, .get_user = get_pmu_evcntr,		\
+	  .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), }
+
+/* Macro to expand the PMEVTYPERn_EL0 register */
+#define PMU_PMEVTYPER_EL0(n)						\
+	{ PMU_SYS_REG(PMEVTYPERn_EL0(n)),				\
+	  .reset = reset_pmevtyper,					\
+	  .access = access_pmu_evtyper, .reg = (PMEVTYPER0_EL0 + n), }
+
+static bool undef_access(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	kvm_inject_undefined(vcpu);
+
+	return false;
+}
+
+/* Macro to expand the AMU counter and type registers*/
+#define AMU_AMEVCNTR0_EL0(n) { SYS_DESC(SYS_AMEVCNTR0_EL0(n)), undef_access }
+#define AMU_AMEVTYPER0_EL0(n) { SYS_DESC(SYS_AMEVTYPER0_EL0(n)), undef_access }
+#define AMU_AMEVCNTR1_EL0(n) { SYS_DESC(SYS_AMEVCNTR1_EL0(n)), undef_access }
+#define AMU_AMEVTYPER1_EL0(n) { SYS_DESC(SYS_AMEVTYPER1_EL0(n)), undef_access }
+
+static unsigned int ptrauth_visibility(const struct kvm_vcpu *vcpu,
+			const struct sys_reg_desc *rd)
+{
+	return vcpu_has_ptrauth(vcpu) ? 0 : REG_HIDDEN;
+}
+
+/*
+ * If we land here on a PtrAuth access, that is because we didn't
+ * fixup the access on exit by allowing the PtrAuth sysregs. The only
+ * way this happens is when the guest does not have PtrAuth support
+ * enabled.
+ */
+#define __PTRAUTH_KEY(k)						\
+	{ SYS_DESC(SYS_## k), undef_access, reset_unknown, k,		\
+	.visibility = ptrauth_visibility}
+
+#define PTRAUTH_KEY(k)							\
+	__PTRAUTH_KEY(k ## KEYLO_EL1),					\
+	__PTRAUTH_KEY(k ## KEYHI_EL1)
+
+static bool access_arch_timer(struct kvm_vcpu *vcpu,
+			      struct sys_reg_params *p,
+			      const struct sys_reg_desc *r)
+{
+	enum kvm_arch_timers tmr;
+	enum kvm_arch_timer_regs treg;
+	u64 reg = reg_to_encoding(r);
+
+	switch (reg) {
+	case SYS_CNTP_TVAL_EL0:
+	case SYS_AARCH32_CNTP_TVAL:
+		tmr = TIMER_PTIMER;
+		treg = TIMER_REG_TVAL;
+		break;
+	case SYS_CNTP_CTL_EL0:
+	case SYS_AARCH32_CNTP_CTL:
+		tmr = TIMER_PTIMER;
+		treg = TIMER_REG_CTL;
+		break;
+	case SYS_CNTP_CVAL_EL0:
+	case SYS_AARCH32_CNTP_CVAL:
+		tmr = TIMER_PTIMER;
+		treg = TIMER_REG_CVAL;
+		break;
+	case SYS_CNTPCT_EL0:
+	case SYS_CNTPCTSS_EL0:
+	case SYS_AARCH32_CNTPCT:
+		tmr = TIMER_PTIMER;
+		treg = TIMER_REG_CNT;
+		break;
+	default:
+		print_sys_reg_msg(p, "%s", "Unhandled trapped timer register");
+		kvm_inject_undefined(vcpu);
+		return false;
+	}
+
+	if (p->is_write)
+		kvm_arm_timer_write_sysreg(vcpu, tmr, treg, p->regval);
+	else
+		p->regval = kvm_arm_timer_read_sysreg(vcpu, tmr, treg);
+
+	return true;
+}
+
+static s64 kvm_arm64_ftr_safe_value(u32 id, const struct arm64_ftr_bits *ftrp,
+				    s64 new, s64 cur)
+{
+	struct arm64_ftr_bits kvm_ftr = *ftrp;
+
+	/* Some features have different safe value type in KVM than host features */
+	switch (id) {
+	case SYS_ID_AA64DFR0_EL1:
+		if (kvm_ftr.shift == ID_AA64DFR0_EL1_PMUVer_SHIFT)
+			kvm_ftr.type = FTR_LOWER_SAFE;
+		break;
+	case SYS_ID_DFR0_EL1:
+		if (kvm_ftr.shift == ID_DFR0_EL1_PerfMon_SHIFT)
+			kvm_ftr.type = FTR_LOWER_SAFE;
+		break;
+	}
+
+	return arm64_ftr_safe_value(&kvm_ftr, new, cur);
+}
+
+/**
+ * arm64_check_features() - Check if a feature register value constitutes
+ * a subset of features indicated by the idreg's KVM sanitised limit.
+ *
+ * This function will check if each feature field of @val is the "safe" value
+ * against idreg's KVM sanitised limit return from reset() callback.
+ * If a field value in @val is the same as the one in limit, it is always
+ * considered the safe value regardless For register fields that are not in
+ * writable, only the value in limit is considered the safe value.
+ *
+ * Return: 0 if all the fields are safe. Otherwise, return negative errno.
+ */
+static int arm64_check_features(struct kvm_vcpu *vcpu,
+				const struct sys_reg_desc *rd,
+				u64 val)
+{
+	const struct arm64_ftr_reg *ftr_reg;
+	const struct arm64_ftr_bits *ftrp = NULL;
+	u32 id = reg_to_encoding(rd);
+	u64 writable_mask = rd->val;
+	u64 limit = rd->reset(vcpu, rd);
+	u64 mask = 0;
+
+	/*
+	 * Hidden and unallocated ID registers may not have a corresponding
+	 * struct arm64_ftr_reg. Of course, if the register is RAZ we know the
+	 * only safe value is 0.
+	 */
+	if (sysreg_visible_as_raz(vcpu, rd))
+		return val ? -E2BIG : 0;
+
+	ftr_reg = get_arm64_ftr_reg(id);
+	if (!ftr_reg)
+		return -EINVAL;
+
+	ftrp = ftr_reg->ftr_bits;
+
+	for (; ftrp && ftrp->width; ftrp++) {
+		s64 f_val, f_lim, safe_val;
+		u64 ftr_mask;
+
+		ftr_mask = arm64_ftr_mask(ftrp);
+		if ((ftr_mask & writable_mask) != ftr_mask)
+			continue;
+
+		f_val = arm64_ftr_value(ftrp, val);
+		f_lim = arm64_ftr_value(ftrp, limit);
+		mask |= ftr_mask;
+
+		if (f_val == f_lim)
+			safe_val = f_val;
+		else
+			safe_val = kvm_arm64_ftr_safe_value(id, ftrp, f_val, f_lim);
+
+		if (safe_val != f_val)
+			return -E2BIG;
+	}
+
+	/* For fields that are not writable, values in limit are the safe values. */
+	if ((val & ~mask) != (limit & ~mask))
+		return -E2BIG;
+
+	return 0;
+}
+
+static u8 pmuver_to_perfmon(u8 pmuver)
+{
+	switch (pmuver) {
+	case ID_AA64DFR0_EL1_PMUVer_IMP:
+		return ID_DFR0_EL1_PerfMon_PMUv3;
+	case ID_AA64DFR0_EL1_PMUVer_IMP_DEF:
+		return ID_DFR0_EL1_PerfMon_IMPDEF;
+	default:
+		/* Anything ARMv8.1+ and NI have the same value. For now. */
+		return pmuver;
+	}
+}
+
+/* Read a sanitised cpufeature ID register by sys_reg_desc */
+static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
+				       const struct sys_reg_desc *r)
+{
+	u32 id = reg_to_encoding(r);
+	u64 val;
+
+	if (sysreg_visible_as_raz(vcpu, r))
+		return 0;
+
+	val = read_sanitised_ftr_reg(id);
+
+	switch (id) {
+	case SYS_ID_AA64PFR1_EL1:
+		if (!kvm_has_mte(vcpu->kvm))
+			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE);
+
+		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SME);
+		break;
+	case SYS_ID_AA64ISAR1_EL1:
+		if (!vcpu_has_ptrauth(vcpu))
+			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
+		break;
+	case SYS_ID_AA64ISAR2_EL1:
+		if (!vcpu_has_ptrauth(vcpu))
+			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
+		if (!cpus_have_final_cap(ARM64_HAS_WFXT))
+			val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_WFxT);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_MOPS);
+		break;
+	case SYS_ID_AA64MMFR2_EL1:
+		val &= ~ID_AA64MMFR2_EL1_CCIDX_MASK;
+		break;
+	case SYS_ID_MMFR4_EL1:
+		val &= ~ARM64_FEATURE_MASK(ID_MMFR4_EL1_CCIDX);
+		break;
+	}
+
+	return val;
+}
+
+static u64 kvm_read_sanitised_id_reg(struct kvm_vcpu *vcpu,
+				     const struct sys_reg_desc *r)
+{
+	return __kvm_read_sanitised_id_reg(vcpu, r);
+}
+
+static u64 read_id_reg(const struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	return IDREG(vcpu->kvm, reg_to_encoding(r));
+}
+
+/*
+ * Return true if the register's (Op0, Op1, CRn, CRm, Op2) is
+ * (3, 0, 0, crm, op2), where 1<=crm<8, 0<=op2<8.
+ */
+static inline bool is_id_reg(u32 id)
+{
+	return (sys_reg_Op0(id) == 3 && sys_reg_Op1(id) == 0 &&
+		sys_reg_CRn(id) == 0 && sys_reg_CRm(id) >= 1 &&
+		sys_reg_CRm(id) < 8);
+}
+
+static unsigned int id_visibility(const struct kvm_vcpu *vcpu,
+				  const struct sys_reg_desc *r)
+{
+	u32 id = reg_to_encoding(r);
+
+	switch (id) {
+	case SYS_ID_AA64ZFR0_EL1:
+		if (!vcpu_has_sve(vcpu))
+			return REG_RAZ;
+		break;
+	}
+
+	return 0;
+}
+
+static unsigned int aa32_id_visibility(const struct kvm_vcpu *vcpu,
+				       const struct sys_reg_desc *r)
+{
+	/*
+	 * AArch32 ID registers are UNKNOWN if AArch32 isn't implemented at any
+	 * EL. Promote to RAZ/WI in order to guarantee consistency between
+	 * systems.
+	 */
+	if (!kvm_supports_32bit_el0())
+		return REG_RAZ | REG_USER_WI;
+
+	return id_visibility(vcpu, r);
+}
+
+static unsigned int raz_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *r)
+{
+	return REG_RAZ;
+}
+
+/* cpufeature ID register access trap handlers */
+
+static bool access_id_reg(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = read_id_reg(vcpu, r);
+	if (vcpu_has_nv(vcpu))
+		access_nested_id_reg(vcpu, p, r);
+
+	return true;
+}
+
+/* Visibility overrides for SVE-specific control registers */
+static unsigned int sve_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *rd)
+{
+	if (vcpu_has_sve(vcpu))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+static u64 read_sanitised_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
+					  const struct sys_reg_desc *rd)
+{
+	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	if (!vcpu_has_sve(vcpu))
+		val &= ~ID_AA64PFR0_EL1_SVE_MASK;
+
+	/*
+	 * The default is to expose CSV2 == 1 if the HW isn't affected.
+	 * Although this is a per-CPU feature, we make it global because
+	 * asymmetric systems are just a nuisance.
+	 *
+	 * Userspace can override this as long as it doesn't promise
+	 * the impossible.
+	 */
+	if (arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED) {
+		val &= ~ID_AA64PFR0_EL1_CSV2_MASK;
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, CSV2, IMP);
+	}
+	if (arm64_get_meltdown_state() == SPECTRE_UNAFFECTED) {
+		val &= ~ID_AA64PFR0_EL1_CSV3_MASK;
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, CSV3, IMP);
+	}
+
+	if (kvm_vgic_global_state.type == VGIC_V3) {
+		val &= ~ID_AA64PFR0_EL1_GIC_MASK;
+		val |= SYS_FIELD_PREP_ENUM(ID_AA64PFR0_EL1, GIC, IMP);
+	}
+
+	val &= ~ID_AA64PFR0_EL1_AMU_MASK;
+
+	return val;
+}
+
+static u64 read_sanitised_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
+					  const struct sys_reg_desc *rd)
+{
+	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+
+	/* Limit debug to ARMv8.0 */
+	val &= ~ID_AA64DFR0_EL1_DebugVer_MASK;
+	val |= SYS_FIELD_PREP_ENUM(ID_AA64DFR0_EL1, DebugVer, IMP);
+
+	/*
+	 * Only initialize the PMU version if the vCPU was configured with one.
+	 */
+	val &= ~ID_AA64DFR0_EL1_PMUVer_MASK;
+	if (kvm_vcpu_has_pmu(vcpu))
+		val |= SYS_FIELD_PREP(ID_AA64DFR0_EL1, PMUVer,
+				      kvm_arm_pmu_get_pmuver_limit());
+
+	/* Hide SPE from guests */
+	val &= ~ID_AA64DFR0_EL1_PMSVer_MASK;
+
+	return val;
+}
+
+static int set_id_aa64dfr0_el1(struct kvm_vcpu *vcpu,
+			       const struct sys_reg_desc *rd,
+			       u64 val)
+{
+	u8 pmuver = SYS_FIELD_GET(ID_AA64DFR0_EL1, PMUVer, val);
+
+	/*
+	 * Prior to commit 3d0dba5764b9 ("KVM: arm64: PMU: Move the
+	 * ID_AA64DFR0_EL1.PMUver limit to VM creation"), KVM erroneously
+	 * exposed an IMP_DEF PMU to userspace and the guest on systems w/
+	 * non-architectural PMUs. Of course, PMUv3 is the only game in town for
+	 * PMU virtualization, so the IMP_DEF value was rather user-hostile.
+	 *
+	 * At minimum, we're on the hook to allow values that were given to
+	 * userspace by KVM. Cover our tracks here and replace the IMP_DEF value
+	 * with a more sensible NI. The value of an ID register changing under
+	 * the nose of the guest is unfortunate, but is certainly no more
+	 * surprising than an ill-guided PMU driver poking at impdef system
+	 * registers that end in an UNDEF...
+	 */
+	if (pmuver == ID_AA64DFR0_EL1_PMUVer_IMP_DEF)
+		val &= ~ID_AA64DFR0_EL1_PMUVer_MASK;
+
+	return set_id_reg(vcpu, rd, val);
+}
+
+static u64 read_sanitised_id_dfr0_el1(struct kvm_vcpu *vcpu,
+				      const struct sys_reg_desc *rd)
+{
+	u8 perfmon = pmuver_to_perfmon(kvm_arm_pmu_get_pmuver_limit());
+	u64 val = read_sanitised_ftr_reg(SYS_ID_DFR0_EL1);
+
+	val &= ~ID_DFR0_EL1_PerfMon_MASK;
+	if (kvm_vcpu_has_pmu(vcpu))
+		val |= SYS_FIELD_PREP(ID_DFR0_EL1, PerfMon, perfmon);
+
+	return val;
+}
+
+static int set_id_dfr0_el1(struct kvm_vcpu *vcpu,
+			   const struct sys_reg_desc *rd,
+			   u64 val)
+{
+	u8 perfmon = SYS_FIELD_GET(ID_DFR0_EL1, PerfMon, val);
+
+	if (perfmon == ID_DFR0_EL1_PerfMon_IMPDEF) {
+		val &= ~ID_DFR0_EL1_PerfMon_MASK;
+		perfmon = 0;
+	}
+
+	/*
+	 * Allow DFR0_EL1.PerfMon to be set from userspace as long as
+	 * it doesn't promise more than what the HW gives us on the
+	 * AArch64 side (as everything is emulated with that), and
+	 * that this is a PMUv3.
+	 */
+	if (perfmon != 0 && perfmon < ID_DFR0_EL1_PerfMon_PMUv3)
+		return -EINVAL;
+
+	return set_id_reg(vcpu, rd, val);
+}
+
+/*
+ * cpufeature ID register user accessors
+ *
+ * For now, these registers are immutable for userspace, so no values
+ * are stored, and for set_id_reg() we don't allow the effective value
+ * to be changed.
+ */
+static int get_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		      u64 *val)
+{
+	/*
+	 * Avoid locking if the VM has already started, as the ID registers are
+	 * guaranteed to be invariant at that point.
+	 */
+	if (kvm_vm_has_ran_once(vcpu->kvm)) {
+		*val = read_id_reg(vcpu, rd);
+		return 0;
+	}
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	*val = read_id_reg(vcpu, rd);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+
+	return 0;
+}
+
+static int set_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		      u64 val)
+{
+	u32 id = reg_to_encoding(rd);
+	int ret;
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+
+	/*
+	 * Once the VM has started the ID registers are immutable. Reject any
+	 * write that does not match the final register value.
+	 */
+	if (kvm_vm_has_ran_once(vcpu->kvm)) {
+		if (val != read_id_reg(vcpu, rd))
+			ret = -EBUSY;
+		else
+			ret = 0;
+
+		mutex_unlock(&vcpu->kvm->arch.config_lock);
+		return ret;
+	}
+
+	ret = arm64_check_features(vcpu, rd, val);
+	if (!ret)
+		IDREG(vcpu->kvm, id) = val;
+
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+
+	/*
+	 * arm64_check_features() returns -E2BIG to indicate the register's
+	 * feature set is a superset of the maximally-allowed register value.
+	 * While it would be nice to precisely describe this to userspace, the
+	 * existing UAPI for KVM_SET_ONE_REG has it that invalid register
+	 * writes return -EINVAL.
+	 */
+	if (ret == -E2BIG)
+		ret = -EINVAL;
+	return ret;
+}
+
+static int get_raz_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		       u64 *val)
+{
+	*val = 0;
+	return 0;
+}
+
+static int set_wi_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		      u64 val)
+{
+	return 0;
+}
+
+static bool access_ctr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+		       const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = read_sanitised_ftr_reg(SYS_CTR_EL0);
+	return true;
+}
+
+static bool access_clidr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	p->regval = __vcpu_sys_reg(vcpu, r->reg);
+	return true;
+}
+
+/*
+ * Fabricate a CLIDR_EL1 value instead of using the real value, which can vary
+ * by the physical CPU which the vcpu currently resides in.
+ */
+static u64 reset_clidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0);
+	u64 clidr;
+	u8 loc;
+
+	if ((ctr_el0 & CTR_EL0_IDC)) {
+		/*
+		 * Data cache clean to the PoU is not required so LoUU and LoUIS
+		 * will not be set and a unified cache, which will be marked as
+		 * LoC, will be added.
+		 *
+		 * If not DIC, let the unified cache L2 so that an instruction
+		 * cache can be added as L1 later.
+		 */
+		loc = (ctr_el0 & CTR_EL0_DIC) ? 1 : 2;
+		clidr = CACHE_TYPE_UNIFIED << CLIDR_CTYPE_SHIFT(loc);
+	} else {
+		/*
+		 * Data cache clean to the PoU is required so let L1 have a data
+		 * cache and mark it as LoUU and LoUIS. As L1 has a data cache,
+		 * it can be marked as LoC too.
+		 */
+		loc = 1;
+		clidr = 1 << CLIDR_LOUU_SHIFT;
+		clidr |= 1 << CLIDR_LOUIS_SHIFT;
+		clidr |= CACHE_TYPE_DATA << CLIDR_CTYPE_SHIFT(1);
+	}
+
+	/*
+	 * Instruction cache invalidation to the PoU is required so let L1 have
+	 * an instruction cache. If L1 already has a data cache, it will be
+	 * CACHE_TYPE_SEPARATE.
+	 */
+	if (!(ctr_el0 & CTR_EL0_DIC))
+		clidr |= CACHE_TYPE_INST << CLIDR_CTYPE_SHIFT(1);
+
+	clidr |= loc << CLIDR_LOC_SHIFT;
+
+	/*
+	 * Add tag cache unified to data cache. Allocation tags and data are
+	 * unified in a cache line so that it looks valid even if there is only
+	 * one cache line.
+	 */
+	if (kvm_has_mte(vcpu->kvm))
+		clidr |= 2 << CLIDR_TTYPE_SHIFT(loc);
+
+	__vcpu_sys_reg(vcpu, r->reg) = clidr;
+
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static int set_clidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		      u64 val)
+{
+	u64 ctr_el0 = read_sanitised_ftr_reg(SYS_CTR_EL0);
+	u64 idc = !CLIDR_LOC(val) || (!CLIDR_LOUIS(val) && !CLIDR_LOUU(val));
+
+	if ((val & CLIDR_EL1_RES0) || (!(ctr_el0 & CTR_EL0_IDC) && idc))
+		return -EINVAL;
+
+	__vcpu_sys_reg(vcpu, rd->reg) = val;
+
+	return 0;
+}
+
+static bool access_csselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	int reg = r->reg;
+
+	if (p->is_write)
+		vcpu_write_sys_reg(vcpu, p->regval, reg);
+	else
+		p->regval = vcpu_read_sys_reg(vcpu, reg);
+	return true;
+}
+
+static bool access_ccsidr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	u32 csselr;
+
+	if (p->is_write)
+		return write_to_read_only(vcpu, p, r);
+
+	csselr = vcpu_read_sys_reg(vcpu, CSSELR_EL1);
+	csselr &= CSSELR_EL1_Level | CSSELR_EL1_InD;
+	if (csselr < CSSELR_MAX)
+		p->regval = get_ccsidr(vcpu, csselr);
+
+	return true;
+}
+
+static unsigned int mte_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *rd)
+{
+	if (kvm_has_mte(vcpu->kvm))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+#define MTE_REG(name) {				\
+	SYS_DESC(SYS_##name),			\
+	.access = undef_access,			\
+	.reset = reset_unknown,			\
+	.reg = name,				\
+	.visibility = mte_visibility,		\
+}
+
+static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *rd)
+{
+	if (vcpu_has_nv(vcpu))
+		return 0;
+
+	return REG_HIDDEN;
+}
+
+#define EL2_REG(name, acc, rst, v) {		\
+	SYS_DESC(SYS_##name),			\
+	.access = acc,				\
+	.reset = rst,				\
+	.reg = name,				\
+	.visibility = el2_visibility,		\
+	.val = v,				\
+}
+
+/*
+ * EL{0,1}2 registers are the EL2 view on an EL0 or EL1 register when
+ * HCR_EL2.E2H==1, and only in the sysreg table for convenience of
+ * handling traps. Given that, they are always hidden from userspace.
+ */
+static unsigned int elx2_visibility(const struct kvm_vcpu *vcpu,
+				    const struct sys_reg_desc *rd)
+{
+	return REG_HIDDEN_USER;
+}
+
+#define EL12_REG(name, acc, rst, v) {		\
+	SYS_DESC(SYS_##name##_EL12),		\
+	.access = acc,				\
+	.reset = rst,				\
+	.reg = name##_EL1,			\
+	.val = v,				\
+	.visibility = elx2_visibility,		\
+}
+
+/*
+ * Since reset() callback and field val are not used for idregs, they will be
+ * used for specific purposes for idregs.
+ * The reset() would return KVM sanitised register value. The value would be the
+ * same as the host kernel sanitised value if there is no KVM sanitisation.
+ * The val would be used as a mask indicating writable fields for the idreg.
+ * Only bits with 1 are writable from userspace. This mask might not be
+ * necessary in the future whenever all ID registers are enabled as writable
+ * from userspace.
+ */
+
+/* sys_reg_desc initialiser for known cpufeature ID registers */
+#define ID_SANITISED(name) {			\
+	SYS_DESC(SYS_##name),			\
+	.access	= access_id_reg,		\
+	.get_user = get_id_reg,			\
+	.set_user = set_id_reg,			\
+	.visibility = id_visibility,		\
+	.reset = kvm_read_sanitised_id_reg,	\
+	.val = 0,				\
+}
+
+/* sys_reg_desc initialiser for known cpufeature ID registers */
+#define AA32_ID_SANITISED(name) {		\
+	SYS_DESC(SYS_##name),			\
+	.access	= access_id_reg,		\
+	.get_user = get_id_reg,			\
+	.set_user = set_id_reg,			\
+	.visibility = aa32_id_visibility,	\
+	.reset = kvm_read_sanitised_id_reg,	\
+	.val = 0,				\
+}
+
+/*
+ * sys_reg_desc initialiser for architecturally unallocated cpufeature ID
+ * register with encoding Op0=3, Op1=0, CRn=0, CRm=crm, Op2=op2
+ * (1 <= crm < 8, 0 <= Op2 < 8).
+ */
+#define ID_UNALLOCATED(crm, op2) {			\
+	Op0(3), Op1(0), CRn(0), CRm(crm), Op2(op2),	\
+	.access = access_id_reg,			\
+	.get_user = get_id_reg,				\
+	.set_user = set_id_reg,				\
+	.visibility = raz_visibility,			\
+	.reset = kvm_read_sanitised_id_reg,		\
+	.val = 0,					\
+}
+
+/*
+ * sys_reg_desc initialiser for known ID registers that we hide from guests.
+ * For now, these are exposed just like unallocated ID regs: they appear
+ * RAZ for the guest.
+ */
+#define ID_HIDDEN(name) {			\
+	SYS_DESC(SYS_##name),			\
+	.access = access_id_reg,		\
+	.get_user = get_id_reg,			\
+	.set_user = set_id_reg,			\
+	.visibility = raz_visibility,		\
+	.reset = kvm_read_sanitised_id_reg,	\
+	.val = 0,				\
+}
+
+static bool access_sp_el1(struct kvm_vcpu *vcpu,
+			  struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		__vcpu_sys_reg(vcpu, SP_EL1) = p->regval;
+	else
+		p->regval = __vcpu_sys_reg(vcpu, SP_EL1);
+
+	return true;
+}
+
+static bool access_elr(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		vcpu_write_sys_reg(vcpu, p->regval, ELR_EL1);
+	else
+		p->regval = vcpu_read_sys_reg(vcpu, ELR_EL1);
+
+	return true;
+}
+
+static bool access_spsr(struct kvm_vcpu *vcpu,
+			struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		__vcpu_sys_reg(vcpu, SPSR_EL1) = p->regval;
+	else
+		p->regval = __vcpu_sys_reg(vcpu, SPSR_EL1);
+
+	return true;
+}
+
+/*
+ * Architected system registers.
+ * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
+ *
+ * Debug handling: We do trap most, if not all debug related system
+ * registers. The implementation is good enough to ensure that a guest
+ * can use these with minimal performance degradation. The drawback is
+ * that we don't implement any of the external debug architecture.
+ * This should be revisited if we ever encounter a more demanding
+ * guest...
+ */
+static const struct sys_reg_desc sys_reg_descs[] = {
+	{ SYS_DESC(SYS_DC_ISW), access_dcsw },
+	{ SYS_DESC(SYS_DC_IGSW), access_dcgsw },
+	{ SYS_DESC(SYS_DC_IGDSW), access_dcgsw },
+	{ SYS_DESC(SYS_DC_CSW), access_dcsw },
+	{ SYS_DESC(SYS_DC_CGSW), access_dcgsw },
+	{ SYS_DESC(SYS_DC_CGDSW), access_dcgsw },
+	{ SYS_DESC(SYS_DC_CISW), access_dcsw },
+	{ SYS_DESC(SYS_DC_CIGSW), access_dcgsw },
+	{ SYS_DESC(SYS_DC_CIGDSW), access_dcgsw },
+
+	DBG_BCR_BVR_WCR_WVR_EL1(0),
+	DBG_BCR_BVR_WCR_WVR_EL1(1),
+	{ SYS_DESC(SYS_MDCCINT_EL1), trap_debug_regs, reset_val, MDCCINT_EL1, 0 },
+	{ SYS_DESC(SYS_MDSCR_EL1), trap_debug_regs, reset_val, MDSCR_EL1, 0 },
+	DBG_BCR_BVR_WCR_WVR_EL1(2),
+	DBG_BCR_BVR_WCR_WVR_EL1(3),
+	DBG_BCR_BVR_WCR_WVR_EL1(4),
+	DBG_BCR_BVR_WCR_WVR_EL1(5),
+	DBG_BCR_BVR_WCR_WVR_EL1(6),
+	DBG_BCR_BVR_WCR_WVR_EL1(7),
+	DBG_BCR_BVR_WCR_WVR_EL1(8),
+	DBG_BCR_BVR_WCR_WVR_EL1(9),
+	DBG_BCR_BVR_WCR_WVR_EL1(10),
+	DBG_BCR_BVR_WCR_WVR_EL1(11),
+	DBG_BCR_BVR_WCR_WVR_EL1(12),
+	DBG_BCR_BVR_WCR_WVR_EL1(13),
+	DBG_BCR_BVR_WCR_WVR_EL1(14),
+	DBG_BCR_BVR_WCR_WVR_EL1(15),
+
+	{ SYS_DESC(SYS_MDRAR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_OSLAR_EL1), trap_oslar_el1 },
+	{ SYS_DESC(SYS_OSLSR_EL1), trap_oslsr_el1, reset_val, OSLSR_EL1,
+		OSLSR_EL1_OSLM_IMPLEMENTED, .set_user = set_oslsr_el1, },
+	{ SYS_DESC(SYS_OSDLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGPRCR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGCLAIMSET_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGCLAIMCLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGAUTHSTATUS_EL1), trap_dbgauthstatus_el1 },
+
+	{ SYS_DESC(SYS_MDCCSR_EL0), trap_raz_wi },
+	{ SYS_DESC(SYS_DBGDTR_EL0), trap_raz_wi },
+	// DBGDTR[TR]X_EL0 share the same encoding
+	{ SYS_DESC(SYS_DBGDTRTX_EL0), trap_raz_wi },
+
+	{ SYS_DESC(SYS_DBGVCR32_EL2), NULL, reset_val, DBGVCR32_EL2, 0 },
+
+	{ SYS_DESC(SYS_MPIDR_EL1), NULL, reset_mpidr, MPIDR_EL1 },
+
+	/*
+	 * ID regs: all ID_SANITISED() entries here must have corresponding
+	 * entries in arm64_ftr_regs[].
+	 */
+
+	/* AArch64 mappings of the AArch32 ID registers */
+	/* CRm=1 */
+	AA32_ID_SANITISED(ID_PFR0_EL1),
+	AA32_ID_SANITISED(ID_PFR1_EL1),
+	{ SYS_DESC(SYS_ID_DFR0_EL1),
+	  .access = access_id_reg,
+	  .get_user = get_id_reg,
+	  .set_user = set_id_dfr0_el1,
+	  .visibility = aa32_id_visibility,
+	  .reset = read_sanitised_id_dfr0_el1,
+	  .val = ID_DFR0_EL1_PerfMon_MASK, },
+	ID_HIDDEN(ID_AFR0_EL1),
+	AA32_ID_SANITISED(ID_MMFR0_EL1),
+	AA32_ID_SANITISED(ID_MMFR1_EL1),
+	AA32_ID_SANITISED(ID_MMFR2_EL1),
+	AA32_ID_SANITISED(ID_MMFR3_EL1),
+
+	/* CRm=2 */
+	AA32_ID_SANITISED(ID_ISAR0_EL1),
+	AA32_ID_SANITISED(ID_ISAR1_EL1),
+	AA32_ID_SANITISED(ID_ISAR2_EL1),
+	AA32_ID_SANITISED(ID_ISAR3_EL1),
+	AA32_ID_SANITISED(ID_ISAR4_EL1),
+	AA32_ID_SANITISED(ID_ISAR5_EL1),
+	AA32_ID_SANITISED(ID_MMFR4_EL1),
+	AA32_ID_SANITISED(ID_ISAR6_EL1),
+
+	/* CRm=3 */
+	AA32_ID_SANITISED(MVFR0_EL1),
+	AA32_ID_SANITISED(MVFR1_EL1),
+	AA32_ID_SANITISED(MVFR2_EL1),
+	ID_UNALLOCATED(3,3),
+	AA32_ID_SANITISED(ID_PFR2_EL1),
+	ID_HIDDEN(ID_DFR1_EL1),
+	AA32_ID_SANITISED(ID_MMFR5_EL1),
+	ID_UNALLOCATED(3,7),
+
+	/* AArch64 ID registers */
+	/* CRm=4 */
+	{ SYS_DESC(SYS_ID_AA64PFR0_EL1),
+	  .access = access_id_reg,
+	  .get_user = get_id_reg,
+	  .set_user = set_id_reg,
+	  .reset = read_sanitised_id_aa64pfr0_el1,
+	  .val = ID_AA64PFR0_EL1_CSV2_MASK | ID_AA64PFR0_EL1_CSV3_MASK, },
+	ID_SANITISED(ID_AA64PFR1_EL1),
+	ID_UNALLOCATED(4,2),
+	ID_UNALLOCATED(4,3),
+	ID_SANITISED(ID_AA64ZFR0_EL1),
+	ID_HIDDEN(ID_AA64SMFR0_EL1),
+	ID_UNALLOCATED(4,6),
+	ID_UNALLOCATED(4,7),
+
+	/* CRm=5 */
+	{ SYS_DESC(SYS_ID_AA64DFR0_EL1),
+	  .access = access_id_reg,
+	  .get_user = get_id_reg,
+	  .set_user = set_id_aa64dfr0_el1,
+	  .reset = read_sanitised_id_aa64dfr0_el1,
+	  .val = ID_AA64DFR0_EL1_PMUVer_MASK, },
+	ID_SANITISED(ID_AA64DFR1_EL1),
+	ID_UNALLOCATED(5,2),
+	ID_UNALLOCATED(5,3),
+	ID_HIDDEN(ID_AA64AFR0_EL1),
+	ID_HIDDEN(ID_AA64AFR1_EL1),
+	ID_UNALLOCATED(5,6),
+	ID_UNALLOCATED(5,7),
+
+	/* CRm=6 */
+	ID_SANITISED(ID_AA64ISAR0_EL1),
+	ID_SANITISED(ID_AA64ISAR1_EL1),
+	ID_SANITISED(ID_AA64ISAR2_EL1),
+	ID_UNALLOCATED(6,3),
+	ID_UNALLOCATED(6,4),
+	ID_UNALLOCATED(6,5),
+	ID_UNALLOCATED(6,6),
+	ID_UNALLOCATED(6,7),
+
+	/* CRm=7 */
+	ID_SANITISED(ID_AA64MMFR0_EL1),
+	ID_SANITISED(ID_AA64MMFR1_EL1),
+	ID_SANITISED(ID_AA64MMFR2_EL1),
+	ID_SANITISED(ID_AA64MMFR3_EL1),
+	ID_UNALLOCATED(7,4),
+	ID_UNALLOCATED(7,5),
+	ID_UNALLOCATED(7,6),
+	ID_UNALLOCATED(7,7),
+
+	{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
+	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
+	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
+
+	MTE_REG(RGSR_EL1),
+	MTE_REG(GCR_EL1),
+
+	{ SYS_DESC(SYS_ZCR_EL1), NULL, reset_val, ZCR_EL1, 0, .visibility = sve_visibility },
+	{ SYS_DESC(SYS_TRFCR_EL1), undef_access },
+	{ SYS_DESC(SYS_SMPRI_EL1), undef_access },
+	{ SYS_DESC(SYS_SMCR_EL1), undef_access },
+	{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
+	{ SYS_DESC(SYS_TTBR1_EL1), access_vm_reg, reset_unknown, TTBR1_EL1 },
+	{ SYS_DESC(SYS_TCR_EL1), access_vm_reg, reset_val, TCR_EL1, 0 },
+	{ SYS_DESC(SYS_TCR2_EL1), access_vm_reg, reset_val, TCR2_EL1, 0 },
+
+	PTRAUTH_KEY(APIA),
+	PTRAUTH_KEY(APIB),
+	PTRAUTH_KEY(APDA),
+	PTRAUTH_KEY(APDB),
+	PTRAUTH_KEY(APGA),
+
+	{ SYS_DESC(SYS_SPSR_EL1), access_spsr},
+	{ SYS_DESC(SYS_ELR_EL1), access_elr},
+
+	{ SYS_DESC(SYS_AFSR0_EL1), access_vm_reg, reset_unknown, AFSR0_EL1 },
+	{ SYS_DESC(SYS_AFSR1_EL1), access_vm_reg, reset_unknown, AFSR1_EL1 },
+	{ SYS_DESC(SYS_ESR_EL1), access_vm_reg, reset_unknown, ESR_EL1 },
+
+	{ SYS_DESC(SYS_ERRIDR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERRSELR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERXFR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERXCTLR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERXSTATUS_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERXADDR_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERXMISC0_EL1), trap_raz_wi },
+	{ SYS_DESC(SYS_ERXMISC1_EL1), trap_raz_wi },
+
+	MTE_REG(TFSR_EL1),
+	MTE_REG(TFSRE0_EL1),
+
+	{ SYS_DESC(SYS_FAR_EL1), access_vm_reg, reset_unknown, FAR_EL1 },
+	{ SYS_DESC(SYS_PAR_EL1), NULL, reset_unknown, PAR_EL1 },
+
+	{ SYS_DESC(SYS_PMSCR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSNEVFR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSICR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSIRR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSFCR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSEVFR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSLATFR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMSIDR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMBLIMITR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMBPTR_EL1), undef_access },
+	{ SYS_DESC(SYS_PMBSR_EL1), undef_access },
+	/* PMBIDR_EL1 is not trapped */
+
+	{ PMU_SYS_REG(PMINTENSET_EL1),
+	  .access = access_pminten, .reg = PMINTENSET_EL1 },
+	{ PMU_SYS_REG(PMINTENCLR_EL1),
+	  .access = access_pminten, .reg = PMINTENSET_EL1 },
+	{ SYS_DESC(SYS_PMMIR_EL1), trap_raz_wi },
+
+	{ SYS_DESC(SYS_MAIR_EL1), access_vm_reg, reset_unknown, MAIR_EL1 },
+	{ SYS_DESC(SYS_PIRE0_EL1), NULL, reset_unknown, PIRE0_EL1 },
+	{ SYS_DESC(SYS_PIR_EL1), NULL, reset_unknown, PIR_EL1 },
+	{ SYS_DESC(SYS_AMAIR_EL1), access_vm_reg, reset_amair_el1, AMAIR_EL1 },
+
+	{ SYS_DESC(SYS_LORSA_EL1), trap_loregion },
+	{ SYS_DESC(SYS_LOREA_EL1), trap_loregion },
+	{ SYS_DESC(SYS_LORN_EL1), trap_loregion },
+	{ SYS_DESC(SYS_LORC_EL1), trap_loregion },
+	{ SYS_DESC(SYS_LORID_EL1), trap_loregion },
+
+	{ SYS_DESC(SYS_VBAR_EL1), access_rw, reset_val, VBAR_EL1, 0 },
+	{ SYS_DESC(SYS_DISR_EL1), NULL, reset_val, DISR_EL1, 0 },
+
+	{ SYS_DESC(SYS_ICC_IAR0_EL1), write_to_read_only },
+	{ SYS_DESC(SYS_ICC_EOIR0_EL1), read_from_write_only },
+	{ SYS_DESC(SYS_ICC_HPPIR0_EL1), write_to_read_only },
+	{ SYS_DESC(SYS_ICC_DIR_EL1), read_from_write_only },
+	{ SYS_DESC(SYS_ICC_RPR_EL1), write_to_read_only },
+	{ SYS_DESC(SYS_ICC_SGI1R_EL1), access_gic_sgi },
+	{ SYS_DESC(SYS_ICC_ASGI1R_EL1), access_gic_sgi },
+	{ SYS_DESC(SYS_ICC_SGI0R_EL1), access_gic_sgi },
+	{ SYS_DESC(SYS_ICC_IAR1_EL1), write_to_read_only },
+	{ SYS_DESC(SYS_ICC_EOIR1_EL1), read_from_write_only },
+	{ SYS_DESC(SYS_ICC_HPPIR1_EL1), write_to_read_only },
+	{ SYS_DESC(SYS_ICC_SRE_EL1), access_gic_sre },
+
+	{ SYS_DESC(SYS_CONTEXTIDR_EL1), access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
+	{ SYS_DESC(SYS_TPIDR_EL1), NULL, reset_unknown, TPIDR_EL1 },
+
+	{ SYS_DESC(SYS_ACCDATA_EL1), undef_access },
+
+	{ SYS_DESC(SYS_SCXTNUM_EL1), undef_access },
+
+	{ SYS_DESC(SYS_CNTKCTL_EL1), NULL, reset_val, CNTKCTL_EL1, 0},
+
+	{ SYS_DESC(SYS_CCSIDR_EL1), access_ccsidr },
+	{ SYS_DESC(SYS_CLIDR_EL1), access_clidr, reset_clidr, CLIDR_EL1,
+	  .set_user = set_clidr },
+	{ SYS_DESC(SYS_CCSIDR2_EL1), undef_access },
+	{ SYS_DESC(SYS_SMIDR_EL1), undef_access },
+	{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
+	{ SYS_DESC(SYS_CTR_EL0), access_ctr },
+	{ SYS_DESC(SYS_SVCR), undef_access },
+
+	{ PMU_SYS_REG(PMCR_EL0), .access = access_pmcr,
+	  .reset = reset_pmcr, .reg = PMCR_EL0 },
+	{ PMU_SYS_REG(PMCNTENSET_EL0),
+	  .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
+	{ PMU_SYS_REG(PMCNTENCLR_EL0),
+	  .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
+	{ PMU_SYS_REG(PMOVSCLR_EL0),
+	  .access = access_pmovs, .reg = PMOVSSET_EL0 },
+	/*
+	 * PM_SWINC_EL0 is exposed to userspace as RAZ/WI, as it was
+	 * previously (and pointlessly) advertised in the past...
+	 */
+	{ PMU_SYS_REG(PMSWINC_EL0),
+	  .get_user = get_raz_reg, .set_user = set_wi_reg,
+	  .access = access_pmswinc, .reset = NULL },
+	{ PMU_SYS_REG(PMSELR_EL0),
+	  .access = access_pmselr, .reset = reset_pmselr, .reg = PMSELR_EL0 },
+	{ PMU_SYS_REG(PMCEID0_EL0),
+	  .access = access_pmceid, .reset = NULL },
+	{ PMU_SYS_REG(PMCEID1_EL0),
+	  .access = access_pmceid, .reset = NULL },
+	{ PMU_SYS_REG(PMCCNTR_EL0),
+	  .access = access_pmu_evcntr, .reset = reset_unknown,
+	  .reg = PMCCNTR_EL0, .get_user = get_pmu_evcntr},
+	{ PMU_SYS_REG(PMXEVTYPER_EL0),
+	  .access = access_pmu_evtyper, .reset = NULL },
+	{ PMU_SYS_REG(PMXEVCNTR_EL0),
+	  .access = access_pmu_evcntr, .reset = NULL },
+	/*
+	 * PMUSERENR_EL0 resets as unknown in 64bit mode while it resets as zero
+	 * in 32bit mode. Here we choose to reset it as zero for consistency.
+	 */
+	{ PMU_SYS_REG(PMUSERENR_EL0), .access = access_pmuserenr,
+	  .reset = reset_val, .reg = PMUSERENR_EL0, .val = 0 },
+	{ PMU_SYS_REG(PMOVSSET_EL0),
+	  .access = access_pmovs, .reg = PMOVSSET_EL0 },
+
+	{ SYS_DESC(SYS_TPIDR_EL0), NULL, reset_unknown, TPIDR_EL0 },
+	{ SYS_DESC(SYS_TPIDRRO_EL0), NULL, reset_unknown, TPIDRRO_EL0 },
+	{ SYS_DESC(SYS_TPIDR2_EL0), undef_access },
+
+	{ SYS_DESC(SYS_SCXTNUM_EL0), undef_access },
+
+	{ SYS_DESC(SYS_AMCR_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCFGR_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCGCR_EL0), undef_access },
+	{ SYS_DESC(SYS_AMUSERENR_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCNTENCLR0_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCNTENSET0_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCNTENCLR1_EL0), undef_access },
+	{ SYS_DESC(SYS_AMCNTENSET1_EL0), undef_access },
+	AMU_AMEVCNTR0_EL0(0),
+	AMU_AMEVCNTR0_EL0(1),
+	AMU_AMEVCNTR0_EL0(2),
+	AMU_AMEVCNTR0_EL0(3),
+	AMU_AMEVCNTR0_EL0(4),
+	AMU_AMEVCNTR0_EL0(5),
+	AMU_AMEVCNTR0_EL0(6),
+	AMU_AMEVCNTR0_EL0(7),
+	AMU_AMEVCNTR0_EL0(8),
+	AMU_AMEVCNTR0_EL0(9),
+	AMU_AMEVCNTR0_EL0(10),
+	AMU_AMEVCNTR0_EL0(11),
+	AMU_AMEVCNTR0_EL0(12),
+	AMU_AMEVCNTR0_EL0(13),
+	AMU_AMEVCNTR0_EL0(14),
+	AMU_AMEVCNTR0_EL0(15),
+	AMU_AMEVTYPER0_EL0(0),
+	AMU_AMEVTYPER0_EL0(1),
+	AMU_AMEVTYPER0_EL0(2),
+	AMU_AMEVTYPER0_EL0(3),
+	AMU_AMEVTYPER0_EL0(4),
+	AMU_AMEVTYPER0_EL0(5),
+	AMU_AMEVTYPER0_EL0(6),
+	AMU_AMEVTYPER0_EL0(7),
+	AMU_AMEVTYPER0_EL0(8),
+	AMU_AMEVTYPER0_EL0(9),
+	AMU_AMEVTYPER0_EL0(10),
+	AMU_AMEVTYPER0_EL0(11),
+	AMU_AMEVTYPER0_EL0(12),
+	AMU_AMEVTYPER0_EL0(13),
+	AMU_AMEVTYPER0_EL0(14),
+	AMU_AMEVTYPER0_EL0(15),
+	AMU_AMEVCNTR1_EL0(0),
+	AMU_AMEVCNTR1_EL0(1),
+	AMU_AMEVCNTR1_EL0(2),
+	AMU_AMEVCNTR1_EL0(3),
+	AMU_AMEVCNTR1_EL0(4),
+	AMU_AMEVCNTR1_EL0(5),
+	AMU_AMEVCNTR1_EL0(6),
+	AMU_AMEVCNTR1_EL0(7),
+	AMU_AMEVCNTR1_EL0(8),
+	AMU_AMEVCNTR1_EL0(9),
+	AMU_AMEVCNTR1_EL0(10),
+	AMU_AMEVCNTR1_EL0(11),
+	AMU_AMEVCNTR1_EL0(12),
+	AMU_AMEVCNTR1_EL0(13),
+	AMU_AMEVCNTR1_EL0(14),
+	AMU_AMEVCNTR1_EL0(15),
+	AMU_AMEVTYPER1_EL0(0),
+	AMU_AMEVTYPER1_EL0(1),
+	AMU_AMEVTYPER1_EL0(2),
+	AMU_AMEVTYPER1_EL0(3),
+	AMU_AMEVTYPER1_EL0(4),
+	AMU_AMEVTYPER1_EL0(5),
+	AMU_AMEVTYPER1_EL0(6),
+	AMU_AMEVTYPER1_EL0(7),
+	AMU_AMEVTYPER1_EL0(8),
+	AMU_AMEVTYPER1_EL0(9),
+	AMU_AMEVTYPER1_EL0(10),
+	AMU_AMEVTYPER1_EL0(11),
+	AMU_AMEVTYPER1_EL0(12),
+	AMU_AMEVTYPER1_EL0(13),
+	AMU_AMEVTYPER1_EL0(14),
+	AMU_AMEVTYPER1_EL0(15),
+
+	{ SYS_DESC(SYS_CNTPCT_EL0), access_arch_timer },
+	{ SYS_DESC(SYS_CNTPCTSS_EL0), access_arch_timer },
+	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_arch_timer },
+	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_arch_timer },
+	{ SYS_DESC(SYS_CNTP_CVAL_EL0), access_arch_timer },
+
+	/* PMEVCNTRn_EL0 */
+	PMU_PMEVCNTR_EL0(0),
+	PMU_PMEVCNTR_EL0(1),
+	PMU_PMEVCNTR_EL0(2),
+	PMU_PMEVCNTR_EL0(3),
+	PMU_PMEVCNTR_EL0(4),
+	PMU_PMEVCNTR_EL0(5),
+	PMU_PMEVCNTR_EL0(6),
+	PMU_PMEVCNTR_EL0(7),
+	PMU_PMEVCNTR_EL0(8),
+	PMU_PMEVCNTR_EL0(9),
+	PMU_PMEVCNTR_EL0(10),
+	PMU_PMEVCNTR_EL0(11),
+	PMU_PMEVCNTR_EL0(12),
+	PMU_PMEVCNTR_EL0(13),
+	PMU_PMEVCNTR_EL0(14),
+	PMU_PMEVCNTR_EL0(15),
+	PMU_PMEVCNTR_EL0(16),
+	PMU_PMEVCNTR_EL0(17),
+	PMU_PMEVCNTR_EL0(18),
+	PMU_PMEVCNTR_EL0(19),
+	PMU_PMEVCNTR_EL0(20),
+	PMU_PMEVCNTR_EL0(21),
+	PMU_PMEVCNTR_EL0(22),
+	PMU_PMEVCNTR_EL0(23),
+	PMU_PMEVCNTR_EL0(24),
+	PMU_PMEVCNTR_EL0(25),
+	PMU_PMEVCNTR_EL0(26),
+	PMU_PMEVCNTR_EL0(27),
+	PMU_PMEVCNTR_EL0(28),
+	PMU_PMEVCNTR_EL0(29),
+	PMU_PMEVCNTR_EL0(30),
+	/* PMEVTYPERn_EL0 */
+	PMU_PMEVTYPER_EL0(0),
+	PMU_PMEVTYPER_EL0(1),
+	PMU_PMEVTYPER_EL0(2),
+	PMU_PMEVTYPER_EL0(3),
+	PMU_PMEVTYPER_EL0(4),
+	PMU_PMEVTYPER_EL0(5),
+	PMU_PMEVTYPER_EL0(6),
+	PMU_PMEVTYPER_EL0(7),
+	PMU_PMEVTYPER_EL0(8),
+	PMU_PMEVTYPER_EL0(9),
+	PMU_PMEVTYPER_EL0(10),
+	PMU_PMEVTYPER_EL0(11),
+	PMU_PMEVTYPER_EL0(12),
+	PMU_PMEVTYPER_EL0(13),
+	PMU_PMEVTYPER_EL0(14),
+	PMU_PMEVTYPER_EL0(15),
+	PMU_PMEVTYPER_EL0(16),
+	PMU_PMEVTYPER_EL0(17),
+	PMU_PMEVTYPER_EL0(18),
+	PMU_PMEVTYPER_EL0(19),
+	PMU_PMEVTYPER_EL0(20),
+	PMU_PMEVTYPER_EL0(21),
+	PMU_PMEVTYPER_EL0(22),
+	PMU_PMEVTYPER_EL0(23),
+	PMU_PMEVTYPER_EL0(24),
+	PMU_PMEVTYPER_EL0(25),
+	PMU_PMEVTYPER_EL0(26),
+	PMU_PMEVTYPER_EL0(27),
+	PMU_PMEVTYPER_EL0(28),
+	PMU_PMEVTYPER_EL0(29),
+	PMU_PMEVTYPER_EL0(30),
+	/*
+	 * PMCCFILTR_EL0 resets as unknown in 64bit mode while it resets as zero
+	 * in 32bit mode. Here we choose to reset it as zero for consistency.
+	 */
+	{ PMU_SYS_REG(PMCCFILTR_EL0), .access = access_pmu_evtyper,
+	  .reset = reset_val, .reg = PMCCFILTR_EL0, .val = 0 },
+
+	EL2_REG(VPIDR_EL2, access_rw, reset_unknown, 0),
+	EL2_REG(VMPIDR_EL2, access_rw, reset_unknown, 0),
+	EL2_REG(SCTLR_EL2, access_rw, reset_val, SCTLR_EL2_RES1),
+	EL2_REG(ACTLR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HCR_EL2, access_rw, reset_val, 0),
+	EL2_REG(MDCR_EL2, access_rw, reset_val, 0),
+	EL2_REG(CPTR_EL2, access_rw, reset_val, CPTR_NVHE_EL2_RES1),
+	EL2_REG(HSTR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HFGRTR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HFGWTR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HFGITR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HACR_EL2, access_rw, reset_val, 0),
+
+	EL2_REG(HCRX_EL2, access_rw, reset_val, 0),
+
+	EL2_REG(TTBR0_EL2, access_rw, reset_val, 0),
+	EL2_REG(TTBR1_EL2, access_rw, reset_val, 0),
+	EL2_REG(TCR_EL2, access_rw, reset_val, TCR_EL2_RES1),
+	EL2_REG(VTTBR_EL2, access_rw, reset_val, 0),
+	EL2_REG(VTCR_EL2, access_rw, reset_val, 0),
+
+	{ SYS_DESC(SYS_DACR32_EL2), NULL, reset_unknown, DACR32_EL2 },
+	EL2_REG(HDFGRTR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HDFGWTR_EL2, access_rw, reset_val, 0),
+	EL2_REG(SPSR_EL2, access_rw, reset_val, 0),
+	EL2_REG(ELR_EL2, access_rw, reset_val, 0),
+	{ SYS_DESC(SYS_SP_EL1), access_sp_el1},
+
+	{ SYS_DESC(SYS_IFSR32_EL2), NULL, reset_unknown, IFSR32_EL2 },
+	EL2_REG(AFSR0_EL2, access_rw, reset_val, 0),
+	EL2_REG(AFSR1_EL2, access_rw, reset_val, 0),
+	EL2_REG(ESR_EL2, access_rw, reset_val, 0),
+	{ SYS_DESC(SYS_FPEXC32_EL2), NULL, reset_val, FPEXC32_EL2, 0x700 },
+
+	EL2_REG(FAR_EL2, access_rw, reset_val, 0),
+	EL2_REG(HPFAR_EL2, access_rw, reset_val, 0),
+
+	EL2_REG(MAIR_EL2, access_rw, reset_val, 0),
+	EL2_REG(AMAIR_EL2, access_rw, reset_val, 0),
+
+	EL2_REG(VBAR_EL2, access_rw, reset_val, 0),
+	EL2_REG(RVBAR_EL2, access_rw, reset_val, 0),
+	{ SYS_DESC(SYS_RMR_EL2), trap_undef },
+
+	EL2_REG(CONTEXTIDR_EL2, access_rw, reset_val, 0),
+	EL2_REG(TPIDR_EL2, access_rw, reset_val, 0),
+
+	EL2_REG(CNTVOFF_EL2, access_rw, reset_val, 0),
+	EL2_REG(CNTHCTL_EL2, access_rw, reset_val, 0),
+
+	EL12_REG(SCTLR, access_vm_reg, reset_val, 0x00C50078),
+	EL12_REG(CPACR, access_rw, reset_val, 0),
+	EL12_REG(TTBR0, access_vm_reg, reset_unknown, 0),
+	EL12_REG(TTBR1, access_vm_reg, reset_unknown, 0),
+	EL12_REG(TCR, access_vm_reg, reset_val, 0),
+	{ SYS_DESC(SYS_SPSR_EL12), access_spsr},
+	{ SYS_DESC(SYS_ELR_EL12), access_elr},
+	EL12_REG(AFSR0, access_vm_reg, reset_unknown, 0),
+	EL12_REG(AFSR1, access_vm_reg, reset_unknown, 0),
+	EL12_REG(ESR, access_vm_reg, reset_unknown, 0),
+	EL12_REG(FAR, access_vm_reg, reset_unknown, 0),
+	EL12_REG(MAIR, access_vm_reg, reset_unknown, 0),
+	EL12_REG(AMAIR, access_vm_reg, reset_amair_el1, 0),
+	EL12_REG(VBAR, access_rw, reset_val, 0),
+	EL12_REG(CONTEXTIDR, access_vm_reg, reset_val, 0),
+	EL12_REG(CNTKCTL, access_rw, reset_val, 0),
+
+	EL2_REG(SP_EL2, NULL, reset_unknown, 0),
+};
+
+static const struct sys_reg_desc *first_idreg;
+
+static bool trap_dbgdidr(struct kvm_vcpu *vcpu,
+			struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	if (p->is_write) {
+		return ignore_write(vcpu, p);
+	} else {
+		u64 dfr = read_sanitised_ftr_reg(SYS_ID_AA64DFR0_EL1);
+		u64 pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+		u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL1_EL3_SHIFT);
+
+		p->regval = ((((dfr >> ID_AA64DFR0_EL1_WRPs_SHIFT) & 0xf) << 28) |
+			     (((dfr >> ID_AA64DFR0_EL1_BRPs_SHIFT) & 0xf) << 24) |
+			     (((dfr >> ID_AA64DFR0_EL1_CTX_CMPs_SHIFT) & 0xf) << 20)
+			     | (6 << 16) | (1 << 15) | (el3 << 14) | (el3 << 12));
+		return true;
+	}
+}
+
+/*
+ * AArch32 debug register mappings
+ *
+ * AArch32 DBGBVRn is mapped to DBGBVRn_EL1[31:0]
+ * AArch32 DBGBXVRn is mapped to DBGBVRn_EL1[63:32]
+ *
+ * None of the other registers share their location, so treat them as
+ * if they were 64bit.
+ */
+#define DBG_BCR_BVR_WCR_WVR(n)						      \
+	/* DBGBVRn */							      \
+	{ AA32(LO), Op1( 0), CRn( 0), CRm((n)), Op2( 4), trap_bvr, NULL, n }, \
+	/* DBGBCRn */							      \
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 5), trap_bcr, NULL, n },	      \
+	/* DBGWVRn */							      \
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 6), trap_wvr, NULL, n },	      \
+	/* DBGWCRn */							      \
+	{ Op1( 0), CRn( 0), CRm((n)), Op2( 7), trap_wcr, NULL, n }
+
+#define DBGBXVR(n)							      \
+	{ AA32(HI), Op1( 0), CRn( 1), CRm((n)), Op2( 1), trap_bvr, NULL, n }
+
+/*
+ * Trapped cp14 registers. We generally ignore most of the external
+ * debug, on the principle that they don't really make sense to a
+ * guest. Revisit this one day, would this principle change.
+ */
+static const struct sys_reg_desc cp14_regs[] = {
+	/* DBGDIDR */
+	{ Op1( 0), CRn( 0), CRm( 0), Op2( 0), trap_dbgdidr },
+	/* DBGDTRRXext */
+	{ Op1( 0), CRn( 0), CRm( 0), Op2( 2), trap_raz_wi },
+
+	DBG_BCR_BVR_WCR_WVR(0),
+	/* DBGDSCRint */
+	{ Op1( 0), CRn( 0), CRm( 1), Op2( 0), trap_raz_wi },
+	DBG_BCR_BVR_WCR_WVR(1),
+	/* DBGDCCINT */
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), trap_debug_regs, NULL, MDCCINT_EL1 },
+	/* DBGDSCRext */
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 2), trap_debug_regs, NULL, MDSCR_EL1 },
+	DBG_BCR_BVR_WCR_WVR(2),
+	/* DBGDTR[RT]Xint */
+	{ Op1( 0), CRn( 0), CRm( 3), Op2( 0), trap_raz_wi },
+	/* DBGDTR[RT]Xext */
+	{ Op1( 0), CRn( 0), CRm( 3), Op2( 2), trap_raz_wi },
+	DBG_BCR_BVR_WCR_WVR(3),
+	DBG_BCR_BVR_WCR_WVR(4),
+	DBG_BCR_BVR_WCR_WVR(5),
+	/* DBGWFAR */
+	{ Op1( 0), CRn( 0), CRm( 6), Op2( 0), trap_raz_wi },
+	/* DBGOSECCR */
+	{ Op1( 0), CRn( 0), CRm( 6), Op2( 2), trap_raz_wi },
+	DBG_BCR_BVR_WCR_WVR(6),
+	/* DBGVCR */
+	{ Op1( 0), CRn( 0), CRm( 7), Op2( 0), trap_debug_regs, NULL, DBGVCR32_EL2 },
+	DBG_BCR_BVR_WCR_WVR(7),
+	DBG_BCR_BVR_WCR_WVR(8),
+	DBG_BCR_BVR_WCR_WVR(9),
+	DBG_BCR_BVR_WCR_WVR(10),
+	DBG_BCR_BVR_WCR_WVR(11),
+	DBG_BCR_BVR_WCR_WVR(12),
+	DBG_BCR_BVR_WCR_WVR(13),
+	DBG_BCR_BVR_WCR_WVR(14),
+	DBG_BCR_BVR_WCR_WVR(15),
+
+	/* DBGDRAR (32bit) */
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), trap_raz_wi },
+
+	DBGBXVR(0),
+	/* DBGOSLAR */
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 4), trap_oslar_el1 },
+	DBGBXVR(1),
+	/* DBGOSLSR */
+	{ Op1( 0), CRn( 1), CRm( 1), Op2( 4), trap_oslsr_el1, NULL, OSLSR_EL1 },
+	DBGBXVR(2),
+	DBGBXVR(3),
+	/* DBGOSDLR */
+	{ Op1( 0), CRn( 1), CRm( 3), Op2( 4), trap_raz_wi },
+	DBGBXVR(4),
+	/* DBGPRCR */
+	{ Op1( 0), CRn( 1), CRm( 4), Op2( 4), trap_raz_wi },
+	DBGBXVR(5),
+	DBGBXVR(6),
+	DBGBXVR(7),
+	DBGBXVR(8),
+	DBGBXVR(9),
+	DBGBXVR(10),
+	DBGBXVR(11),
+	DBGBXVR(12),
+	DBGBXVR(13),
+	DBGBXVR(14),
+	DBGBXVR(15),
+
+	/* DBGDSAR (32bit) */
+	{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), trap_raz_wi },
+
+	/* DBGDEVID2 */
+	{ Op1( 0), CRn( 7), CRm( 0), Op2( 7), trap_raz_wi },
+	/* DBGDEVID1 */
+	{ Op1( 0), CRn( 7), CRm( 1), Op2( 7), trap_raz_wi },
+	/* DBGDEVID */
+	{ Op1( 0), CRn( 7), CRm( 2), Op2( 7), trap_raz_wi },
+	/* DBGCLAIMSET */
+	{ Op1( 0), CRn( 7), CRm( 8), Op2( 6), trap_raz_wi },
+	/* DBGCLAIMCLR */
+	{ Op1( 0), CRn( 7), CRm( 9), Op2( 6), trap_raz_wi },
+	/* DBGAUTHSTATUS */
+	{ Op1( 0), CRn( 7), CRm(14), Op2( 6), trap_dbgauthstatus_el1 },
+};
+
+/* Trapped cp14 64bit registers */
+static const struct sys_reg_desc cp14_64_regs[] = {
+	/* DBGDRAR (64bit) */
+	{ Op1( 0), CRm( 1), .access = trap_raz_wi },
+
+	/* DBGDSAR (64bit) */
+	{ Op1( 0), CRm( 2), .access = trap_raz_wi },
+};
+
+#define CP15_PMU_SYS_REG(_map, _Op1, _CRn, _CRm, _Op2)			\
+	AA32(_map),							\
+	Op1(_Op1), CRn(_CRn), CRm(_CRm), Op2(_Op2),			\
+	.visibility = pmu_visibility
+
+/* Macro to expand the PMEVCNTRn register */
+#define PMU_PMEVCNTR(n)							\
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 0b1110,				\
+	  (0b1000 | (((n) >> 3) & 0x3)), ((n) & 0x7)),			\
+	  .access = access_pmu_evcntr }
+
+/* Macro to expand the PMEVTYPERn register */
+#define PMU_PMEVTYPER(n)						\
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 0b1110,				\
+	  (0b1100 | (((n) >> 3) & 0x3)), ((n) & 0x7)),			\
+	  .access = access_pmu_evtyper }
+/*
+ * Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
+ * depending on the way they are accessed (as a 32bit or a 64bit
+ * register).
+ */
+static const struct sys_reg_desc cp15_regs[] = {
+	{ Op1( 0), CRn( 0), CRm( 0), Op2( 1), access_ctr },
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), access_vm_reg, NULL, SCTLR_EL1 },
+	/* ACTLR */
+	{ AA32(LO), Op1( 0), CRn( 1), CRm( 0), Op2( 1), access_actlr, NULL, ACTLR_EL1 },
+	/* ACTLR2 */
+	{ AA32(HI), Op1( 0), CRn( 1), CRm( 0), Op2( 3), access_actlr, NULL, ACTLR_EL1 },
+	{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, TTBR0_EL1 },
+	{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, TTBR1_EL1 },
+	/* TTBCR */
+	{ AA32(LO), Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, TCR_EL1 },
+	/* TTBCR2 */
+	{ AA32(HI), Op1( 0), CRn( 2), CRm( 0), Op2( 3), access_vm_reg, NULL, TCR_EL1 },
+	{ Op1( 0), CRn( 3), CRm( 0), Op2( 0), access_vm_reg, NULL, DACR32_EL2 },
+	/* DFSR */
+	{ Op1( 0), CRn( 5), CRm( 0), Op2( 0), access_vm_reg, NULL, ESR_EL1 },
+	{ Op1( 0), CRn( 5), CRm( 0), Op2( 1), access_vm_reg, NULL, IFSR32_EL2 },
+	/* ADFSR */
+	{ Op1( 0), CRn( 5), CRm( 1), Op2( 0), access_vm_reg, NULL, AFSR0_EL1 },
+	/* AIFSR */
+	{ Op1( 0), CRn( 5), CRm( 1), Op2( 1), access_vm_reg, NULL, AFSR1_EL1 },
+	/* DFAR */
+	{ AA32(LO), Op1( 0), CRn( 6), CRm( 0), Op2( 0), access_vm_reg, NULL, FAR_EL1 },
+	/* IFAR */
+	{ AA32(HI), Op1( 0), CRn( 6), CRm( 0), Op2( 2), access_vm_reg, NULL, FAR_EL1 },
+
+	/*
+	 * DC{C,I,CI}SW operations:
+	 */
+	{ Op1( 0), CRn( 7), CRm( 6), Op2( 2), access_dcsw },
+	{ Op1( 0), CRn( 7), CRm(10), Op2( 2), access_dcsw },
+	{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
+
+	/* PMU */
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 12, 0), .access = access_pmcr },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 12, 1), .access = access_pmcnten },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 12, 2), .access = access_pmcnten },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 12, 3), .access = access_pmovs },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 12, 4), .access = access_pmswinc },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 12, 5), .access = access_pmselr },
+	{ CP15_PMU_SYS_REG(LO,     0, 9, 12, 6), .access = access_pmceid },
+	{ CP15_PMU_SYS_REG(LO,     0, 9, 12, 7), .access = access_pmceid },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 13, 0), .access = access_pmu_evcntr },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 13, 1), .access = access_pmu_evtyper },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 13, 2), .access = access_pmu_evcntr },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 14, 0), .access = access_pmuserenr },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 14, 1), .access = access_pminten },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 14, 2), .access = access_pminten },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 14, 3), .access = access_pmovs },
+	{ CP15_PMU_SYS_REG(HI,     0, 9, 14, 4), .access = access_pmceid },
+	{ CP15_PMU_SYS_REG(HI,     0, 9, 14, 5), .access = access_pmceid },
+	/* PMMIR */
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 9, 14, 6), .access = trap_raz_wi },
+
+	/* PRRR/MAIR0 */
+	{ AA32(LO), Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, MAIR_EL1 },
+	/* NMRR/MAIR1 */
+	{ AA32(HI), Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, MAIR_EL1 },
+	/* AMAIR0 */
+	{ AA32(LO), Op1( 0), CRn(10), CRm( 3), Op2( 0), access_vm_reg, NULL, AMAIR_EL1 },
+	/* AMAIR1 */
+	{ AA32(HI), Op1( 0), CRn(10), CRm( 3), Op2( 1), access_vm_reg, NULL, AMAIR_EL1 },
+
+	/* ICC_SRE */
+	{ Op1( 0), CRn(12), CRm(12), Op2( 5), access_gic_sre },
+
+	{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, CONTEXTIDR_EL1 },
+
+	/* Arch Tmers */
+	{ SYS_DESC(SYS_AARCH32_CNTP_TVAL), access_arch_timer },
+	{ SYS_DESC(SYS_AARCH32_CNTP_CTL), access_arch_timer },
+
+	/* PMEVCNTRn */
+	PMU_PMEVCNTR(0),
+	PMU_PMEVCNTR(1),
+	PMU_PMEVCNTR(2),
+	PMU_PMEVCNTR(3),
+	PMU_PMEVCNTR(4),
+	PMU_PMEVCNTR(5),
+	PMU_PMEVCNTR(6),
+	PMU_PMEVCNTR(7),
+	PMU_PMEVCNTR(8),
+	PMU_PMEVCNTR(9),
+	PMU_PMEVCNTR(10),
+	PMU_PMEVCNTR(11),
+	PMU_PMEVCNTR(12),
+	PMU_PMEVCNTR(13),
+	PMU_PMEVCNTR(14),
+	PMU_PMEVCNTR(15),
+	PMU_PMEVCNTR(16),
+	PMU_PMEVCNTR(17),
+	PMU_PMEVCNTR(18),
+	PMU_PMEVCNTR(19),
+	PMU_PMEVCNTR(20),
+	PMU_PMEVCNTR(21),
+	PMU_PMEVCNTR(22),
+	PMU_PMEVCNTR(23),
+	PMU_PMEVCNTR(24),
+	PMU_PMEVCNTR(25),
+	PMU_PMEVCNTR(26),
+	PMU_PMEVCNTR(27),
+	PMU_PMEVCNTR(28),
+	PMU_PMEVCNTR(29),
+	PMU_PMEVCNTR(30),
+	/* PMEVTYPERn */
+	PMU_PMEVTYPER(0),
+	PMU_PMEVTYPER(1),
+	PMU_PMEVTYPER(2),
+	PMU_PMEVTYPER(3),
+	PMU_PMEVTYPER(4),
+	PMU_PMEVTYPER(5),
+	PMU_PMEVTYPER(6),
+	PMU_PMEVTYPER(7),
+	PMU_PMEVTYPER(8),
+	PMU_PMEVTYPER(9),
+	PMU_PMEVTYPER(10),
+	PMU_PMEVTYPER(11),
+	PMU_PMEVTYPER(12),
+	PMU_PMEVTYPER(13),
+	PMU_PMEVTYPER(14),
+	PMU_PMEVTYPER(15),
+	PMU_PMEVTYPER(16),
+	PMU_PMEVTYPER(17),
+	PMU_PMEVTYPER(18),
+	PMU_PMEVTYPER(19),
+	PMU_PMEVTYPER(20),
+	PMU_PMEVTYPER(21),
+	PMU_PMEVTYPER(22),
+	PMU_PMEVTYPER(23),
+	PMU_PMEVTYPER(24),
+	PMU_PMEVTYPER(25),
+	PMU_PMEVTYPER(26),
+	PMU_PMEVTYPER(27),
+	PMU_PMEVTYPER(28),
+	PMU_PMEVTYPER(29),
+	PMU_PMEVTYPER(30),
+	/* PMCCFILTR */
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 14, 15, 7), .access = access_pmu_evtyper },
+
+	{ Op1(1), CRn( 0), CRm( 0), Op2(0), access_ccsidr },
+	{ Op1(1), CRn( 0), CRm( 0), Op2(1), access_clidr },
+
+	/* CCSIDR2 */
+	{ Op1(1), CRn( 0), CRm( 0),  Op2(2), undef_access },
+
+	{ Op1(2), CRn( 0), CRm( 0), Op2(0), access_csselr, NULL, CSSELR_EL1 },
+};
+
+static const struct sys_reg_desc cp15_64_regs[] = {
+	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, TTBR0_EL1 },
+	{ CP15_PMU_SYS_REG(DIRECT, 0, 0, 9, 0), .access = access_pmu_evcntr },
+	{ Op1( 0), CRn( 0), CRm(12), Op2( 0), access_gic_sgi }, /* ICC_SGI1R */
+	{ SYS_DESC(SYS_AARCH32_CNTPCT),	      access_arch_timer },
+	{ Op1( 1), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, TTBR1_EL1 },
+	{ Op1( 1), CRn( 0), CRm(12), Op2( 0), access_gic_sgi }, /* ICC_ASGI1R */
+	{ Op1( 2), CRn( 0), CRm(12), Op2( 0), access_gic_sgi }, /* ICC_SGI0R */
+	{ SYS_DESC(SYS_AARCH32_CNTP_CVAL),    access_arch_timer },
+	{ SYS_DESC(SYS_AARCH32_CNTPCTSS),     access_arch_timer },
+};
+
+static bool check_sysreg_table(const struct sys_reg_desc *table, unsigned int n,
+			       bool is_32)
+{
+	unsigned int i;
+
+	for (i = 0; i < n; i++) {
+		if (!is_32 && table[i].reg && !table[i].reset) {
+			kvm_err("sys_reg table %pS entry %d lacks reset\n", &table[i], i);
+			return false;
+		}
+
+		if (i && cmp_sys_reg(&table[i-1], &table[i]) >= 0) {
+			kvm_err("sys_reg table %pS entry %d out of order\n", &table[i - 1], i - 1);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu)
+{
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
+static void perform_access(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *params,
+			   const struct sys_reg_desc *r)
+{
+	trace_kvm_sys_access(*vcpu_pc(vcpu), params, r);
+
+	/* Check for regs disabled by runtime config */
+	if (sysreg_hidden(vcpu, r)) {
+		kvm_inject_undefined(vcpu);
+		return;
+	}
+
+	/*
+	 * Not having an accessor means that we have configured a trap
+	 * that we don't know how to handle. This certainly qualifies
+	 * as a gross bug that should be fixed right away.
+	 */
+	BUG_ON(!r->access);
+
+	/* Skip instruction if instructed so */
+	if (likely(r->access(vcpu, params, r)))
+		kvm_incr_pc(vcpu);
+}
+
+/*
+ * emulate_cp --  tries to match a sys_reg access in a handling table, and
+ *                call the corresponding trap handler.
+ *
+ * @params: pointer to the descriptor of the access
+ * @table: array of trap descriptors
+ * @num: size of the trap descriptor array
+ *
+ * Return true if the access has been handled, false if not.
+ */
+static bool emulate_cp(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *params,
+		       const struct sys_reg_desc *table,
+		       size_t num)
+{
+	const struct sys_reg_desc *r;
+
+	if (!table)
+		return false;	/* Not handled */
+
+	r = find_reg(params, table, num);
+
+	if (r) {
+		perform_access(vcpu, params, r);
+		return true;
+	}
+
+	/* Not handled */
+	return false;
+}
+
+static void unhandled_cp_access(struct kvm_vcpu *vcpu,
+				struct sys_reg_params *params)
+{
+	u8 esr_ec = kvm_vcpu_trap_get_class(vcpu);
+	int cp = -1;
+
+	switch (esr_ec) {
+	case ESR_ELx_EC_CP15_32:
+	case ESR_ELx_EC_CP15_64:
+		cp = 15;
+		break;
+	case ESR_ELx_EC_CP14_MR:
+	case ESR_ELx_EC_CP14_64:
+		cp = 14;
+		break;
+	default:
+		WARN_ON(1);
+	}
+
+	print_sys_reg_msg(params,
+			  "Unsupported guest CP%d access at: %08lx [%08lx]\n",
+			  cp, *vcpu_pc(vcpu), *vcpu_cpsr(vcpu));
+	kvm_inject_undefined(vcpu);
+}
+
+/**
+ * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
+			    const struct sys_reg_desc *global,
+			    size_t nr_global)
+{
+	struct sys_reg_params params;
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
+	int Rt2 = (esr >> 10) & 0x1f;
+
+	params.CRm = (esr >> 1) & 0xf;
+	params.is_write = ((esr & 1) == 0);
+
+	params.Op0 = 0;
+	params.Op1 = (esr >> 16) & 0xf;
+	params.Op2 = 0;
+	params.CRn = 0;
+
+	/*
+	 * Make a 64-bit value out of Rt and Rt2. As we use the same trap
+	 * backends between AArch32 and AArch64, we get away with it.
+	 */
+	if (params.is_write) {
+		params.regval = vcpu_get_reg(vcpu, Rt) & 0xffffffff;
+		params.regval |= vcpu_get_reg(vcpu, Rt2) << 32;
+	}
+
+	/*
+	 * If the table contains a handler, handle the
+	 * potential register operation in the case of a read and return
+	 * with success.
+	 */
+	if (emulate_cp(vcpu, &params, global, nr_global)) {
+		/* Split up the value between registers for the read side */
+		if (!params.is_write) {
+			vcpu_set_reg(vcpu, Rt, lower_32_bits(params.regval));
+			vcpu_set_reg(vcpu, Rt2, upper_32_bits(params.regval));
+		}
+
+		return 1;
+	}
+
+	unhandled_cp_access(vcpu, &params);
+	return 1;
+}
+
+static bool emulate_sys_reg(struct kvm_vcpu *vcpu, struct sys_reg_params *params);
+
+/*
+ * The CP10 ID registers are architecturally mapped to AArch64 feature
+ * registers. Abuse that fact so we can rely on the AArch64 handler for accesses
+ * from AArch32.
+ */
+static bool kvm_esr_cp10_id_to_sys64(u64 esr, struct sys_reg_params *params)
+{
+	u8 reg_id = (esr >> 10) & 0xf;
+	bool valid;
+
+	params->is_write = ((esr & 1) == 0);
+	params->Op0 = 3;
+	params->Op1 = 0;
+	params->CRn = 0;
+	params->CRm = 3;
+
+	/* CP10 ID registers are read-only */
+	valid = !params->is_write;
+
+	switch (reg_id) {
+	/* MVFR0 */
+	case 0b0111:
+		params->Op2 = 0;
+		break;
+	/* MVFR1 */
+	case 0b0110:
+		params->Op2 = 1;
+		break;
+	/* MVFR2 */
+	case 0b0101:
+		params->Op2 = 2;
+		break;
+	default:
+		valid = false;
+	}
+
+	if (valid)
+		return true;
+
+	kvm_pr_unimpl("Unhandled cp10 register %s: %u\n",
+		      params->is_write ? "write" : "read", reg_id);
+	return false;
+}
+
+/**
+ * kvm_handle_cp10_id() - Handles a VMRS trap on guest access to a 'Media and
+ *			  VFP Register' from AArch32.
+ * @vcpu: The vCPU pointer
+ *
+ * MVFR{0-2} are architecturally mapped to the AArch64 MVFR{0-2}_EL1 registers.
+ * Work out the correct AArch64 system register encoding and reroute to the
+ * AArch64 system register emulation.
+ */
+int kvm_handle_cp10_id(struct kvm_vcpu *vcpu)
+{
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
+	u64 esr = kvm_vcpu_get_esr(vcpu);
+	struct sys_reg_params params;
+
+	/* UNDEF on any unhandled register access */
+	if (!kvm_esr_cp10_id_to_sys64(esr, &params)) {
+		kvm_inject_undefined(vcpu);
+		return 1;
+	}
+
+	if (emulate_sys_reg(vcpu, &params))
+		vcpu_set_reg(vcpu, Rt, params.regval);
+
+	return 1;
+}
+
+/**
+ * kvm_emulate_cp15_id_reg() - Handles an MRC trap on a guest CP15 access where
+ *			       CRn=0, which corresponds to the AArch32 feature
+ *			       registers.
+ * @vcpu: the vCPU pointer
+ * @params: the system register access parameters.
+ *
+ * Our cp15 system register tables do not enumerate the AArch32 feature
+ * registers. Conveniently, our AArch64 table does, and the AArch32 system
+ * register encoding can be trivially remapped into the AArch64 for the feature
+ * registers: Append op0=3, leaving op1, CRn, CRm, and op2 the same.
+ *
+ * According to DDI0487G.b G7.3.1, paragraph "Behavior of VMSAv8-32 32-bit
+ * System registers with (coproc=0b1111, CRn==c0)", read accesses from this
+ * range are either UNKNOWN or RES0. Rerouting remains architectural as we
+ * treat undefined registers in this range as RAZ.
+ */
+static int kvm_emulate_cp15_id_reg(struct kvm_vcpu *vcpu,
+				   struct sys_reg_params *params)
+{
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
+
+	/* Treat impossible writes to RO registers as UNDEFINED */
+	if (params->is_write) {
+		unhandled_cp_access(vcpu, params);
+		return 1;
+	}
+
+	params->Op0 = 3;
+
+	/*
+	 * All registers where CRm > 3 are known to be UNKNOWN/RAZ from AArch32.
+	 * Avoid conflicting with future expansion of AArch64 feature registers
+	 * and simply treat them as RAZ here.
+	 */
+	if (params->CRm > 3)
+		params->regval = 0;
+	else if (!emulate_sys_reg(vcpu, params))
+		return 1;
+
+	vcpu_set_reg(vcpu, Rt, params->regval);
+	return 1;
+}
+
+/**
+ * kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access
+ * @vcpu: The VCPU pointer
+ * @run:  The kvm_run struct
+ */
+static int kvm_handle_cp_32(struct kvm_vcpu *vcpu,
+			    struct sys_reg_params *params,
+			    const struct sys_reg_desc *global,
+			    size_t nr_global)
+{
+	int Rt  = kvm_vcpu_sys_get_rt(vcpu);
+
+	params->regval = vcpu_get_reg(vcpu, Rt);
+
+	if (emulate_cp(vcpu, params, global, nr_global)) {
+		if (!params->is_write)
+			vcpu_set_reg(vcpu, Rt, params->regval);
+		return 1;
+	}
+
+	unhandled_cp_access(vcpu, params);
+	return 1;
+}
+
+int kvm_handle_cp15_64(struct kvm_vcpu *vcpu)
+{
+	return kvm_handle_cp_64(vcpu, cp15_64_regs, ARRAY_SIZE(cp15_64_regs));
+}
+
+int kvm_handle_cp15_32(struct kvm_vcpu *vcpu)
+{
+	struct sys_reg_params params;
+
+	params = esr_cp1x_32_to_params(kvm_vcpu_get_esr(vcpu));
+
+	/*
+	 * Certain AArch32 ID registers are handled by rerouting to the AArch64
+	 * system register table. Registers in the ID range where CRm=0 are
+	 * excluded from this scheme as they do not trivially map into AArch64
+	 * system register encodings.
+	 */
+	if (params.Op1 == 0 && params.CRn == 0 && params.CRm)
+		return kvm_emulate_cp15_id_reg(vcpu, &params);
+
+	return kvm_handle_cp_32(vcpu, &params, cp15_regs, ARRAY_SIZE(cp15_regs));
+}
+
+int kvm_handle_cp14_64(struct kvm_vcpu *vcpu)
+{
+	return kvm_handle_cp_64(vcpu, cp14_64_regs, ARRAY_SIZE(cp14_64_regs));
+}
+
+int kvm_handle_cp14_32(struct kvm_vcpu *vcpu)
+{
+	struct sys_reg_params params;
+
+	params = esr_cp1x_32_to_params(kvm_vcpu_get_esr(vcpu));
+
+	return kvm_handle_cp_32(vcpu, &params, cp14_regs, ARRAY_SIZE(cp14_regs));
+}
+
+static bool is_imp_def_sys_reg(struct sys_reg_params *params)
+{
+	// See ARM DDI 0487E.a, section D12.3.2
+	return params->Op0 == 3 && (params->CRn & 0b1011) == 0b1011;
+}
+
+/**
+ * emulate_sys_reg - Emulate a guest access to an AArch64 system register
+ * @vcpu: The VCPU pointer
+ * @params: Decoded system register parameters
+ *
+ * Return: true if the system register access was successful, false otherwise.
+ */
+static bool emulate_sys_reg(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *params)
+{
+	const struct sys_reg_desc *r;
+
+	r = find_reg(params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
+
+	if (likely(r)) {
+		perform_access(vcpu, params, r);
+		return true;
+	}
+
+	if (is_imp_def_sys_reg(params)) {
+		kvm_inject_undefined(vcpu);
+	} else {
+		print_sys_reg_msg(params,
+				  "Unsupported guest sys_reg access at: %lx [%08lx]\n",
+				  *vcpu_pc(vcpu), *vcpu_cpsr(vcpu));
+		kvm_inject_undefined(vcpu);
+	}
+	return false;
+}
+
+static void kvm_reset_id_regs(struct kvm_vcpu *vcpu)
+{
+	const struct sys_reg_desc *idreg = first_idreg;
+	u32 id = reg_to_encoding(idreg);
+	struct kvm *kvm = vcpu->kvm;
+
+	if (test_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags))
+		return;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	/* Initialize all idregs */
+	while (is_id_reg(id)) {
+		IDREG(kvm, id) = idreg->reset(vcpu, idreg);
+
+		idreg++;
+		id = reg_to_encoding(idreg);
+	}
+
+	set_bit(KVM_ARCH_FLAG_ID_REGS_INITIALIZED, &kvm->arch.flags);
+}
+
+/**
+ * kvm_reset_sys_regs - sets system registers to reset value
+ * @vcpu: The VCPU pointer
+ *
+ * This function finds the right table above and sets the registers on the
+ * virtual CPU struct to their architecturally defined reset values.
+ */
+void kvm_reset_sys_regs(struct kvm_vcpu *vcpu)
+{
+	unsigned long i;
+
+	kvm_reset_id_regs(vcpu);
+
+	for (i = 0; i < ARRAY_SIZE(sys_reg_descs); i++) {
+		const struct sys_reg_desc *r = &sys_reg_descs[i];
+
+		if (is_id_reg(reg_to_encoding(r)))
+			continue;
+
+		if (r->reset)
+			r->reset(vcpu, r);
+	}
+}
+
+/**
+ * kvm_handle_sys_reg -- handles a mrs/msr trap on a guest sys_reg access
+ * @vcpu: The VCPU pointer
+ */
+int kvm_handle_sys_reg(struct kvm_vcpu *vcpu)
+{
+	struct sys_reg_params params;
+	unsigned long esr = kvm_vcpu_get_esr(vcpu);
+	int Rt = kvm_vcpu_sys_get_rt(vcpu);
+
+	trace_kvm_handle_sys_reg(esr);
+
+	if (__check_nv_sr_forward(vcpu))
+		return 1;
+
+	params = esr_sys64_to_params(esr);
+	params.regval = vcpu_get_reg(vcpu, Rt);
+
+	if (!emulate_sys_reg(vcpu, &params))
+		return 1;
+
+	if (!params.is_write)
+		vcpu_set_reg(vcpu, Rt, params.regval);
+	return 1;
+}
+
+/******************************************************************************
+ * Userspace API
+ *****************************************************************************/
+
+static bool index_to_params(u64 id, struct sys_reg_params *params)
+{
+	switch (id & KVM_REG_SIZE_MASK) {
+	case KVM_REG_SIZE_U64:
+		/* Any unused index bits means it's not valid. */
+		if (id & ~(KVM_REG_ARCH_MASK | KVM_REG_SIZE_MASK
+			      | KVM_REG_ARM_COPROC_MASK
+			      | KVM_REG_ARM64_SYSREG_OP0_MASK
+			      | KVM_REG_ARM64_SYSREG_OP1_MASK
+			      | KVM_REG_ARM64_SYSREG_CRN_MASK
+			      | KVM_REG_ARM64_SYSREG_CRM_MASK
+			      | KVM_REG_ARM64_SYSREG_OP2_MASK))
+			return false;
+		params->Op0 = ((id & KVM_REG_ARM64_SYSREG_OP0_MASK)
+			       >> KVM_REG_ARM64_SYSREG_OP0_SHIFT);
+		params->Op1 = ((id & KVM_REG_ARM64_SYSREG_OP1_MASK)
+			       >> KVM_REG_ARM64_SYSREG_OP1_SHIFT);
+		params->CRn = ((id & KVM_REG_ARM64_SYSREG_CRN_MASK)
+			       >> KVM_REG_ARM64_SYSREG_CRN_SHIFT);
+		params->CRm = ((id & KVM_REG_ARM64_SYSREG_CRM_MASK)
+			       >> KVM_REG_ARM64_SYSREG_CRM_SHIFT);
+		params->Op2 = ((id & KVM_REG_ARM64_SYSREG_OP2_MASK)
+			       >> KVM_REG_ARM64_SYSREG_OP2_SHIFT);
+		return true;
+	default:
+		return false;
+	}
+}
+
+const struct sys_reg_desc *get_reg_by_id(u64 id,
+					 const struct sys_reg_desc table[],
+					 unsigned int num)
+{
+	struct sys_reg_params params;
+
+	if (!index_to_params(id, &params))
+		return NULL;
+
+	return find_reg(&params, table, num);
+}
+
+/* Decode an index value, and find the sys_reg_desc entry. */
+static const struct sys_reg_desc *
+id_to_sys_reg_desc(struct kvm_vcpu *vcpu, u64 id,
+		   const struct sys_reg_desc table[], unsigned int num)
+
+{
+	const struct sys_reg_desc *r;
+
+	/* We only do sys_reg for now. */
+	if ((id & KVM_REG_ARM_COPROC_MASK) != KVM_REG_ARM64_SYSREG)
+		return NULL;
+
+	r = get_reg_by_id(id, table, num);
+
+	/* Not saved in the sys_reg array and not otherwise accessible? */
+	if (r && (!(r->reg || r->get_user) || sysreg_hidden(vcpu, r)))
+		r = NULL;
+
+	return r;
+}
+
+/*
+ * These are the invariant sys_reg registers: we let the guest see the
+ * host versions of these, so they're part of the guest state.
+ *
+ * A future CPU may provide a mechanism to present different values to
+ * the guest, or a future kvm may trap them.
+ */
+
+#define FUNCTION_INVARIANT(reg)						\
+	static u64 get_##reg(struct kvm_vcpu *v,			\
+			      const struct sys_reg_desc *r)		\
+	{								\
+		((struct sys_reg_desc *)r)->val = read_sysreg(reg);	\
+		return ((struct sys_reg_desc *)r)->val;			\
+	}
+
+FUNCTION_INVARIANT(midr_el1)
+FUNCTION_INVARIANT(revidr_el1)
+FUNCTION_INVARIANT(aidr_el1)
+
+static u64 get_ctr_el0(struct kvm_vcpu *v, const struct sys_reg_desc *r)
+{
+	((struct sys_reg_desc *)r)->val = read_sanitised_ftr_reg(SYS_CTR_EL0);
+	return ((struct sys_reg_desc *)r)->val;
+}
+
+/* ->val is filled in by kvm_sys_reg_table_init() */
+static struct sys_reg_desc invariant_sys_regs[] __ro_after_init = {
+	{ SYS_DESC(SYS_MIDR_EL1), NULL, get_midr_el1 },
+	{ SYS_DESC(SYS_REVIDR_EL1), NULL, get_revidr_el1 },
+	{ SYS_DESC(SYS_AIDR_EL1), NULL, get_aidr_el1 },
+	{ SYS_DESC(SYS_CTR_EL0), NULL, get_ctr_el0 },
+};
+
+static int get_invariant_sys_reg(u64 id, u64 __user *uaddr)
+{
+	const struct sys_reg_desc *r;
+
+	r = get_reg_by_id(id, invariant_sys_regs,
+			  ARRAY_SIZE(invariant_sys_regs));
+	if (!r)
+		return -ENOENT;
+
+	return put_user(r->val, uaddr);
+}
+
+static int set_invariant_sys_reg(u64 id, u64 __user *uaddr)
+{
+	const struct sys_reg_desc *r;
+	u64 val;
+
+	r = get_reg_by_id(id, invariant_sys_regs,
+			  ARRAY_SIZE(invariant_sys_regs));
+	if (!r)
+		return -ENOENT;
+
+	if (get_user(val, uaddr))
+		return -EFAULT;
+
+	/* This is what we mean by invariant: you can't change it. */
+	if (r->val != val)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int demux_c15_get(struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
+{
+	u32 val;
+	u32 __user *uval = uaddr;
+
+	/* Fail if we have unknown bits set. */
+	if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
+		   | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
+		return -ENOENT;
+
+	switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
+	case KVM_REG_ARM_DEMUX_ID_CCSIDR:
+		if (KVM_REG_SIZE(id) != 4)
+			return -ENOENT;
+		val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
+			>> KVM_REG_ARM_DEMUX_VAL_SHIFT;
+		if (val >= CSSELR_MAX)
+			return -ENOENT;
+
+		return put_user(get_ccsidr(vcpu, val), uval);
+	default:
+		return -ENOENT;
+	}
+}
+
+static int demux_c15_set(struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
+{
+	u32 val, newval;
+	u32 __user *uval = uaddr;
+
+	/* Fail if we have unknown bits set. */
+	if (id & ~(KVM_REG_ARCH_MASK|KVM_REG_SIZE_MASK|KVM_REG_ARM_COPROC_MASK
+		   | ((1 << KVM_REG_ARM_COPROC_SHIFT)-1)))
+		return -ENOENT;
+
+	switch (id & KVM_REG_ARM_DEMUX_ID_MASK) {
+	case KVM_REG_ARM_DEMUX_ID_CCSIDR:
+		if (KVM_REG_SIZE(id) != 4)
+			return -ENOENT;
+		val = (id & KVM_REG_ARM_DEMUX_VAL_MASK)
+			>> KVM_REG_ARM_DEMUX_VAL_SHIFT;
+		if (val >= CSSELR_MAX)
+			return -ENOENT;
+
+		if (get_user(newval, uval))
+			return -EFAULT;
+
+		return set_ccsidr(vcpu, val, newval);
+	default:
+		return -ENOENT;
+	}
+}
+
+int kvm_sys_reg_get_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
+			 const struct sys_reg_desc table[], unsigned int num)
+{
+	u64 __user *uaddr = (u64 __user *)(unsigned long)reg->addr;
+	const struct sys_reg_desc *r;
+	u64 val;
+	int ret;
+
+	r = id_to_sys_reg_desc(vcpu, reg->id, table, num);
+	if (!r || sysreg_hidden_user(vcpu, r))
+		return -ENOENT;
+
+	if (r->get_user) {
+		ret = (r->get_user)(vcpu, r, &val);
+	} else {
+		val = __vcpu_sys_reg(vcpu, r->reg);
+		ret = 0;
+	}
+
+	if (!ret)
+		ret = put_user(val, uaddr);
+
+	return ret;
+}
+
+int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	void __user *uaddr = (void __user *)(unsigned long)reg->addr;
+	int err;
+
+	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
+		return demux_c15_get(vcpu, reg->id, uaddr);
+
+	err = get_invariant_sys_reg(reg->id, uaddr);
+	if (err != -ENOENT)
+		return err;
+
+	return kvm_sys_reg_get_user(vcpu, reg,
+				    sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
+}
+
+int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
+			 const struct sys_reg_desc table[], unsigned int num)
+{
+	u64 __user *uaddr = (u64 __user *)(unsigned long)reg->addr;
+	const struct sys_reg_desc *r;
+	u64 val;
+	int ret;
+
+	if (get_user(val, uaddr))
+		return -EFAULT;
+
+	r = id_to_sys_reg_desc(vcpu, reg->id, table, num);
+	if (!r || sysreg_hidden_user(vcpu, r))
+		return -ENOENT;
+
+	if (sysreg_user_write_ignore(vcpu, r))
+		return 0;
+
+	if (r->set_user) {
+		ret = (r->set_user)(vcpu, r, val);
+	} else {
+		__vcpu_sys_reg(vcpu, r->reg) = val;
+		ret = 0;
+	}
+
+	return ret;
+}
+
+int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
+{
+	void __user *uaddr = (void __user *)(unsigned long)reg->addr;
+	int err;
+
+	if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX)
+		return demux_c15_set(vcpu, reg->id, uaddr);
+
+	err = set_invariant_sys_reg(reg->id, uaddr);
+	if (err != -ENOENT)
+		return err;
+
+	return kvm_sys_reg_set_user(vcpu, reg,
+				    sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
+}
+
+static unsigned int num_demux_regs(void)
+{
+	return CSSELR_MAX;
+}
+
+static int write_demux_regids(u64 __user *uindices)
+{
+	u64 val = KVM_REG_ARM64 | KVM_REG_SIZE_U32 | KVM_REG_ARM_DEMUX;
+	unsigned int i;
+
+	val |= KVM_REG_ARM_DEMUX_ID_CCSIDR;
+	for (i = 0; i < CSSELR_MAX; i++) {
+		if (put_user(val | i, uindices))
+			return -EFAULT;
+		uindices++;
+	}
+	return 0;
+}
+
+static u64 sys_reg_to_index(const struct sys_reg_desc *reg)
+{
+	return (KVM_REG_ARM64 | KVM_REG_SIZE_U64 |
+		KVM_REG_ARM64_SYSREG |
+		(reg->Op0 << KVM_REG_ARM64_SYSREG_OP0_SHIFT) |
+		(reg->Op1 << KVM_REG_ARM64_SYSREG_OP1_SHIFT) |
+		(reg->CRn << KVM_REG_ARM64_SYSREG_CRN_SHIFT) |
+		(reg->CRm << KVM_REG_ARM64_SYSREG_CRM_SHIFT) |
+		(reg->Op2 << KVM_REG_ARM64_SYSREG_OP2_SHIFT));
+}
+
+static bool copy_reg_to_user(const struct sys_reg_desc *reg, u64 __user **uind)
+{
+	if (!*uind)
+		return true;
+
+	if (put_user(sys_reg_to_index(reg), *uind))
+		return false;
+
+	(*uind)++;
+	return true;
+}
+
+static int walk_one_sys_reg(const struct kvm_vcpu *vcpu,
+			    const struct sys_reg_desc *rd,
+			    u64 __user **uind,
+			    unsigned int *total)
+{
+	/*
+	 * Ignore registers we trap but don't save,
+	 * and for which no custom user accessor is provided.
+	 */
+	if (!(rd->reg || rd->get_user))
+		return 0;
+
+	if (sysreg_hidden_user(vcpu, rd))
+		return 0;
+
+	if (!copy_reg_to_user(rd, uind))
+		return -EFAULT;
+
+	(*total)++;
+	return 0;
+}
+
+/* Assumed ordered tables, see kvm_sys_reg_table_init. */
+static int walk_sys_regs(struct kvm_vcpu *vcpu, u64 __user *uind)
+{
+	const struct sys_reg_desc *i2, *end2;
+	unsigned int total = 0;
+	int err;
+
+	i2 = sys_reg_descs;
+	end2 = sys_reg_descs + ARRAY_SIZE(sys_reg_descs);
+
+	while (i2 != end2) {
+		err = walk_one_sys_reg(vcpu, i2++, &uind, &total);
+		if (err)
+			return err;
+	}
+	return total;
+}
+
+unsigned long kvm_arm_num_sys_reg_descs(struct kvm_vcpu *vcpu)
+{
+	return ARRAY_SIZE(invariant_sys_regs)
+		+ num_demux_regs()
+		+ walk_sys_regs(vcpu, (u64 __user *)NULL);
+}
+
+int kvm_arm_copy_sys_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
+{
+	unsigned int i;
+	int err;
+
+	/* Then give them all the invariant registers' indices. */
+	for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++) {
+		if (put_user(sys_reg_to_index(&invariant_sys_regs[i]), uindices))
+			return -EFAULT;
+		uindices++;
+	}
+
+	err = walk_sys_regs(vcpu, uindices);
+	if (err < 0)
+		return err;
+	uindices += err;
+
+	return write_demux_regids(uindices);
+}
+
+int __init kvm_sys_reg_table_init(void)
+{
+	struct sys_reg_params params;
+	bool valid = true;
+	unsigned int i;
+
+	/* Make sure tables are unique and in order. */
+	valid &= check_sysreg_table(sys_reg_descs, ARRAY_SIZE(sys_reg_descs), false);
+	valid &= check_sysreg_table(cp14_regs, ARRAY_SIZE(cp14_regs), true);
+	valid &= check_sysreg_table(cp14_64_regs, ARRAY_SIZE(cp14_64_regs), true);
+	valid &= check_sysreg_table(cp15_regs, ARRAY_SIZE(cp15_regs), true);
+	valid &= check_sysreg_table(cp15_64_regs, ARRAY_SIZE(cp15_64_regs), true);
+	valid &= check_sysreg_table(invariant_sys_regs, ARRAY_SIZE(invariant_sys_regs), false);
+
+	if (!valid)
+		return -EINVAL;
+
+	/* We abuse the reset function to overwrite the table itself. */
+	for (i = 0; i < ARRAY_SIZE(invariant_sys_regs); i++)
+		invariant_sys_regs[i].reset(NULL, &invariant_sys_regs[i]);
+
+	/* Find the first idreg (SYS_ID_PFR0_EL1) in sys_reg_descs. */
+	params = encoding_to_params(SYS_ID_PFR0_EL1);
+	first_idreg = find_reg(&params, sys_reg_descs, ARRAY_SIZE(sys_reg_descs));
+	if (!first_idreg)
+		return -EINVAL;
+
+	if (kvm_get_mode() == KVM_MODE_NV)
+		return populate_nv_trap_config();
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
new file mode 100644
index 000000000..c65c129b3
--- /dev/null
+++ b/arch/arm64/kvm/sys_regs.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/kvm/coproc.h
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Authors: Christoffer Dall <c.dall@virtualopensystems.com>
+ */
+
+#ifndef __ARM64_KVM_SYS_REGS_LOCAL_H__
+#define __ARM64_KVM_SYS_REGS_LOCAL_H__
+
+#include <linux/bsearch.h>
+
+#define reg_to_encoding(x)						\
+	sys_reg((u32)(x)->Op0, (u32)(x)->Op1,				\
+		(u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2)
+
+struct sys_reg_params {
+	u8	Op0;
+	u8	Op1;
+	u8	CRn;
+	u8	CRm;
+	u8	Op2;
+	u64	regval;
+	bool	is_write;
+};
+
+#define encoding_to_params(reg)						\
+	((struct sys_reg_params){ .Op0 = sys_reg_Op0(reg),		\
+				  .Op1 = sys_reg_Op1(reg),		\
+				  .CRn = sys_reg_CRn(reg),		\
+				  .CRm = sys_reg_CRm(reg),		\
+				  .Op2 = sys_reg_Op2(reg) })
+
+#define esr_sys64_to_params(esr)                                               \
+	((struct sys_reg_params){ .Op0 = ((esr) >> 20) & 3,                    \
+				  .Op1 = ((esr) >> 14) & 0x7,                  \
+				  .CRn = ((esr) >> 10) & 0xf,                  \
+				  .CRm = ((esr) >> 1) & 0xf,                   \
+				  .Op2 = ((esr) >> 17) & 0x7,                  \
+				  .is_write = !((esr) & 1) })
+
+#define esr_cp1x_32_to_params(esr)						\
+	((struct sys_reg_params){ .Op1 = ((esr) >> 14) & 0x7,			\
+				  .CRn = ((esr) >> 10) & 0xf,			\
+				  .CRm = ((esr) >> 1) & 0xf,			\
+				  .Op2 = ((esr) >> 17) & 0x7,			\
+				  .is_write = !((esr) & 1) })
+
+struct sys_reg_desc {
+	/* Sysreg string for debug */
+	const char *name;
+
+	enum {
+		AA32_DIRECT,
+		AA32_LO,
+		AA32_HI,
+	} aarch32_map;
+
+	/* MRS/MSR instruction which accesses it. */
+	u8	Op0;
+	u8	Op1;
+	u8	CRn;
+	u8	CRm;
+	u8	Op2;
+
+	/* Trapped access from guest, if non-NULL. */
+	bool (*access)(struct kvm_vcpu *,
+		       struct sys_reg_params *,
+		       const struct sys_reg_desc *);
+
+	/*
+	 * Initialization for vcpu. Return initialized value, or KVM
+	 * sanitized value for ID registers.
+	 */
+	u64 (*reset)(struct kvm_vcpu *, const struct sys_reg_desc *);
+
+	/* Index into sys_reg[], or 0 if we don't need to save it. */
+	int reg;
+
+	/* Value (usually reset value), or write mask for idregs */
+	u64 val;
+
+	/* Custom get/set_user functions, fallback to generic if NULL */
+	int (*get_user)(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			u64 *val);
+	int (*set_user)(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+			u64 val);
+
+	/* Return mask of REG_* runtime visibility overrides */
+	unsigned int (*visibility)(const struct kvm_vcpu *vcpu,
+				   const struct sys_reg_desc *rd);
+};
+
+#define REG_HIDDEN		(1 << 0) /* hidden from userspace and guest */
+#define REG_HIDDEN_USER		(1 << 1) /* hidden from userspace only */
+#define REG_RAZ			(1 << 2) /* RAZ from userspace and guest */
+#define REG_USER_WI		(1 << 3) /* WI from userspace only */
+
+static __printf(2, 3)
+inline void print_sys_reg_msg(const struct sys_reg_params *p,
+				       char *fmt, ...)
+{
+	va_list va;
+
+	va_start(va, fmt);
+	/* Look, we even formatted it for you to paste into the table! */
+	kvm_pr_unimpl("%pV { Op0(%2u), Op1(%2u), CRn(%2u), CRm(%2u), Op2(%2u), func_%s },\n",
+		      &(struct va_format){ fmt, &va },
+		      p->Op0, p->Op1, p->CRn, p->CRm, p->Op2, p->is_write ? "write" : "read");
+	va_end(va);
+}
+
+static inline void print_sys_reg_instr(const struct sys_reg_params *p)
+{
+	/* GCC warns on an empty format string */
+	print_sys_reg_msg(p, "%s", "");
+}
+
+static inline bool ignore_write(struct kvm_vcpu *vcpu,
+				const struct sys_reg_params *p)
+{
+	return true;
+}
+
+static inline bool read_zero(struct kvm_vcpu *vcpu,
+			     struct sys_reg_params *p)
+{
+	p->regval = 0;
+	return true;
+}
+
+/* Reset functions */
+static inline u64 reset_unknown(struct kvm_vcpu *vcpu,
+				 const struct sys_reg_desc *r)
+{
+	BUG_ON(!r->reg);
+	BUG_ON(r->reg >= NR_SYS_REGS);
+	__vcpu_sys_reg(vcpu, r->reg) = 0x1de7ec7edbadc0deULL;
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static inline u64 reset_val(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	BUG_ON(!r->reg);
+	BUG_ON(r->reg >= NR_SYS_REGS);
+	__vcpu_sys_reg(vcpu, r->reg) = r->val;
+	return __vcpu_sys_reg(vcpu, r->reg);
+}
+
+static inline unsigned int sysreg_visibility(const struct kvm_vcpu *vcpu,
+					     const struct sys_reg_desc *r)
+{
+	if (likely(!r->visibility))
+		return 0;
+
+	return r->visibility(vcpu, r);
+}
+
+static inline bool sysreg_hidden(const struct kvm_vcpu *vcpu,
+				 const struct sys_reg_desc *r)
+{
+	return sysreg_visibility(vcpu, r) & REG_HIDDEN;
+}
+
+static inline bool sysreg_hidden_user(const struct kvm_vcpu *vcpu,
+				      const struct sys_reg_desc *r)
+{
+	if (likely(!r->visibility))
+		return false;
+
+	return r->visibility(vcpu, r) & (REG_HIDDEN | REG_HIDDEN_USER);
+}
+
+static inline bool sysreg_visible_as_raz(const struct kvm_vcpu *vcpu,
+					 const struct sys_reg_desc *r)
+{
+	return sysreg_visibility(vcpu, r) & REG_RAZ;
+}
+
+static inline bool sysreg_user_write_ignore(const struct kvm_vcpu *vcpu,
+					    const struct sys_reg_desc *r)
+{
+	return sysreg_visibility(vcpu, r) & REG_USER_WI;
+}
+
+static inline int cmp_sys_reg(const struct sys_reg_desc *i1,
+			      const struct sys_reg_desc *i2)
+{
+	BUG_ON(i1 == i2);
+	if (!i1)
+		return 1;
+	else if (!i2)
+		return -1;
+	if (i1->Op0 != i2->Op0)
+		return i1->Op0 - i2->Op0;
+	if (i1->Op1 != i2->Op1)
+		return i1->Op1 - i2->Op1;
+	if (i1->CRn != i2->CRn)
+		return i1->CRn - i2->CRn;
+	if (i1->CRm != i2->CRm)
+		return i1->CRm - i2->CRm;
+	return i1->Op2 - i2->Op2;
+}
+
+static inline int match_sys_reg(const void *key, const void *elt)
+{
+	const unsigned long pval = (unsigned long)key;
+	const struct sys_reg_desc *r = elt;
+
+	return pval - reg_to_encoding(r);
+}
+
+static inline const struct sys_reg_desc *
+find_reg(const struct sys_reg_params *params, const struct sys_reg_desc table[],
+	 unsigned int num)
+{
+	unsigned long pval = reg_to_encoding(params);
+
+	return __inline_bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
+}
+
+const struct sys_reg_desc *get_reg_by_id(u64 id,
+					 const struct sys_reg_desc table[],
+					 unsigned int num);
+
+int kvm_arm_sys_reg_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
+int kvm_arm_sys_reg_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *);
+int kvm_sys_reg_get_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
+			 const struct sys_reg_desc table[], unsigned int num);
+int kvm_sys_reg_set_user(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg,
+			 const struct sys_reg_desc table[], unsigned int num);
+
+#define AA32(_x)	.aarch32_map = AA32_##_x
+#define Op0(_x) 	.Op0 = _x
+#define Op1(_x) 	.Op1 = _x
+#define CRn(_x)		.CRn = _x
+#define CRm(_x) 	.CRm = _x
+#define Op2(_x) 	.Op2 = _x
+
+#define SYS_DESC(reg)					\
+	.name = #reg,					\
+	Op0(sys_reg_Op0(reg)), Op1(sys_reg_Op1(reg)),	\
+	CRn(sys_reg_CRn(reg)), CRm(sys_reg_CRm(reg)),	\
+	Op2(sys_reg_Op2(reg))
+
+#endif /* __ARM64_KVM_SYS_REGS_LOCAL_H__ */
diff --git a/arch/arm64/kvm/trace.h b/arch/arm64/kvm/trace.h
new file mode 100644
index 000000000..86f9ea47b
--- /dev/null
+++ b/arch/arm64/kvm/trace.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TRACE_ARM64_KVM_H
+#define _TRACE_ARM64_KVM_H
+
+#include "trace_arm.h"
+#include "trace_handle_exit.h"
+
+#endif	/* _TRACE_ARM64_KVM_H */
diff --git a/arch/arm64/kvm/trace_arm.h b/arch/arm64/kvm/trace_arm.h
new file mode 100644
index 000000000..8ad531049
--- /dev/null
+++ b/arch/arm64/kvm/trace_arm.h
@@ -0,0 +1,401 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if !defined(_TRACE_ARM_ARM64_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_ARM_ARM64_KVM_H
+
+#include <asm/kvm_emulate.h>
+#include <kvm/arm_arch_timer.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+
+/*
+ * Tracepoints for entry/exit to guest
+ */
+TRACE_EVENT(kvm_entry,
+	TP_PROTO(unsigned long vcpu_pc),
+	TP_ARGS(vcpu_pc),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_pc		)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc		= vcpu_pc;
+	),
+
+	TP_printk("PC: 0x%016lx", __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_exit,
+	TP_PROTO(int ret, unsigned int esr_ec, unsigned long vcpu_pc),
+	TP_ARGS(ret, esr_ec, vcpu_pc),
+
+	TP_STRUCT__entry(
+		__field(	int,		ret		)
+		__field(	unsigned int,	esr_ec		)
+		__field(	unsigned long,	vcpu_pc		)
+	),
+
+	TP_fast_assign(
+		__entry->ret			= ARM_EXCEPTION_CODE(ret);
+		__entry->esr_ec = ARM_EXCEPTION_IS_TRAP(ret) ? esr_ec : 0;
+		__entry->vcpu_pc		= vcpu_pc;
+	),
+
+	TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%016lx",
+		  __print_symbolic(__entry->ret, kvm_arm_exception_type),
+		  __entry->esr_ec,
+		  __print_symbolic(__entry->esr_ec, kvm_arm_exception_class),
+		  __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_guest_fault,
+	TP_PROTO(unsigned long vcpu_pc, unsigned long hsr,
+		 unsigned long hxfar,
+		 unsigned long long ipa),
+	TP_ARGS(vcpu_pc, hsr, hxfar, ipa),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_pc		)
+		__field(	unsigned long,	hsr		)
+		__field(	unsigned long,	hxfar		)
+		__field(   unsigned long long,	ipa		)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc		= vcpu_pc;
+		__entry->hsr			= hsr;
+		__entry->hxfar			= hxfar;
+		__entry->ipa			= ipa;
+	),
+
+	TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#016lx",
+		  __entry->ipa, __entry->hsr,
+		  __entry->hxfar, __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_access_fault,
+	TP_PROTO(unsigned long ipa),
+	TP_ARGS(ipa),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	ipa		)
+	),
+
+	TP_fast_assign(
+		__entry->ipa		= ipa;
+	),
+
+	TP_printk("IPA: %lx", __entry->ipa)
+);
+
+TRACE_EVENT(kvm_irq_line,
+	TP_PROTO(unsigned int type, int vcpu_idx, int irq_num, int level),
+	TP_ARGS(type, vcpu_idx, irq_num, level),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	type		)
+		__field(	int,		vcpu_idx	)
+		__field(	int,		irq_num		)
+		__field(	int,		level		)
+	),
+
+	TP_fast_assign(
+		__entry->type		= type;
+		__entry->vcpu_idx	= vcpu_idx;
+		__entry->irq_num	= irq_num;
+		__entry->level		= level;
+	),
+
+	TP_printk("Inject %s interrupt (%d), vcpu->idx: %d, num: %d, level: %d",
+		  (__entry->type == KVM_ARM_IRQ_TYPE_CPU) ? "CPU" :
+		  (__entry->type == KVM_ARM_IRQ_TYPE_PPI) ? "VGIC PPI" :
+		  (__entry->type == KVM_ARM_IRQ_TYPE_SPI) ? "VGIC SPI" : "UNKNOWN",
+		  __entry->type, __entry->vcpu_idx, __entry->irq_num, __entry->level)
+);
+
+TRACE_EVENT(kvm_mmio_emulate,
+	TP_PROTO(unsigned long vcpu_pc, unsigned long instr,
+		 unsigned long cpsr),
+	TP_ARGS(vcpu_pc, instr, cpsr),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_pc		)
+		__field(	unsigned long,	instr		)
+		__field(	unsigned long,	cpsr		)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc		= vcpu_pc;
+		__entry->instr			= instr;
+		__entry->cpsr			= cpsr;
+	),
+
+	TP_printk("Emulate MMIO at: 0x%016lx (instr: %08lx, cpsr: %08lx)",
+		  __entry->vcpu_pc, __entry->instr, __entry->cpsr)
+);
+
+TRACE_EVENT(kvm_set_way_flush,
+	    TP_PROTO(unsigned long vcpu_pc, bool cache),
+	    TP_ARGS(vcpu_pc, cache),
+
+	    TP_STRUCT__entry(
+		    __field(	unsigned long,	vcpu_pc		)
+		    __field(	bool,		cache		)
+	    ),
+
+	    TP_fast_assign(
+		    __entry->vcpu_pc		= vcpu_pc;
+		    __entry->cache		= cache;
+	    ),
+
+	    TP_printk("S/W flush at 0x%016lx (cache %s)",
+		      __entry->vcpu_pc, __entry->cache ? "on" : "off")
+);
+
+TRACE_EVENT(kvm_toggle_cache,
+	    TP_PROTO(unsigned long vcpu_pc, bool was, bool now),
+	    TP_ARGS(vcpu_pc, was, now),
+
+	    TP_STRUCT__entry(
+		    __field(	unsigned long,	vcpu_pc		)
+		    __field(	bool,		was		)
+		    __field(	bool,		now		)
+	    ),
+
+	    TP_fast_assign(
+		    __entry->vcpu_pc		= vcpu_pc;
+		    __entry->was		= was;
+		    __entry->now		= now;
+	    ),
+
+	    TP_printk("VM op at 0x%016lx (cache was %s, now %s)",
+		      __entry->vcpu_pc, __entry->was ? "on" : "off",
+		      __entry->now ? "on" : "off")
+);
+
+/*
+ * Tracepoints for arch_timer
+ */
+TRACE_EVENT(kvm_timer_update_irq,
+	TP_PROTO(unsigned long vcpu_id, __u32 irq, int level),
+	TP_ARGS(vcpu_id, irq, level),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_id	)
+		__field(	__u32,		irq	)
+		__field(	int,		level	)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id	= vcpu_id;
+		__entry->irq		= irq;
+		__entry->level		= level;
+	),
+
+	TP_printk("VCPU: %ld, IRQ %d, level %d",
+		  __entry->vcpu_id, __entry->irq, __entry->level)
+);
+
+TRACE_EVENT(kvm_get_timer_map,
+	TP_PROTO(unsigned long vcpu_id, struct timer_map *map),
+	TP_ARGS(vcpu_id, map),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,		vcpu_id	)
+		__field(	int,			direct_vtimer	)
+		__field(	int,			direct_ptimer	)
+		__field(	int,			emul_vtimer	)
+		__field(	int,			emul_ptimer	)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id		= vcpu_id;
+		__entry->direct_vtimer		= arch_timer_ctx_index(map->direct_vtimer);
+		__entry->direct_ptimer =
+			(map->direct_ptimer) ? arch_timer_ctx_index(map->direct_ptimer) : -1;
+		__entry->emul_vtimer =
+			(map->emul_vtimer) ? arch_timer_ctx_index(map->emul_vtimer) : -1;
+		__entry->emul_ptimer =
+			(map->emul_ptimer) ? arch_timer_ctx_index(map->emul_ptimer) : -1;
+	),
+
+	TP_printk("VCPU: %ld, dv: %d, dp: %d, ev: %d, ep: %d",
+		  __entry->vcpu_id,
+		  __entry->direct_vtimer,
+		  __entry->direct_ptimer,
+		  __entry->emul_vtimer,
+		  __entry->emul_ptimer)
+);
+
+TRACE_EVENT(kvm_timer_save_state,
+	TP_PROTO(struct arch_timer_context *ctx),
+	TP_ARGS(ctx),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,		ctl		)
+		__field(	unsigned long long,	cval		)
+		__field(	int,			timer_idx	)
+	),
+
+	TP_fast_assign(
+		__entry->ctl			= timer_get_ctl(ctx);
+		__entry->cval			= timer_get_cval(ctx);
+		__entry->timer_idx		= arch_timer_ctx_index(ctx);
+	),
+
+	TP_printk("   CTL: %#08lx CVAL: %#16llx arch_timer_ctx_index: %d",
+		  __entry->ctl,
+		  __entry->cval,
+		  __entry->timer_idx)
+);
+
+TRACE_EVENT(kvm_timer_restore_state,
+	TP_PROTO(struct arch_timer_context *ctx),
+	TP_ARGS(ctx),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,		ctl		)
+		__field(	unsigned long long,	cval		)
+		__field(	int,			timer_idx	)
+	),
+
+	TP_fast_assign(
+		__entry->ctl			= timer_get_ctl(ctx);
+		__entry->cval			= timer_get_cval(ctx);
+		__entry->timer_idx		= arch_timer_ctx_index(ctx);
+	),
+
+	TP_printk("CTL: %#08lx CVAL: %#16llx arch_timer_ctx_index: %d",
+		  __entry->ctl,
+		  __entry->cval,
+		  __entry->timer_idx)
+);
+
+TRACE_EVENT(kvm_timer_hrtimer_expire,
+	TP_PROTO(struct arch_timer_context *ctx),
+	TP_ARGS(ctx),
+
+	TP_STRUCT__entry(
+		__field(	int,			timer_idx	)
+	),
+
+	TP_fast_assign(
+		__entry->timer_idx		= arch_timer_ctx_index(ctx);
+	),
+
+	TP_printk("arch_timer_ctx_index: %d", __entry->timer_idx)
+);
+
+TRACE_EVENT(kvm_timer_emulate,
+	TP_PROTO(struct arch_timer_context *ctx, bool should_fire),
+	TP_ARGS(ctx, should_fire),
+
+	TP_STRUCT__entry(
+		__field(	int,			timer_idx	)
+		__field(	bool,			should_fire	)
+	),
+
+	TP_fast_assign(
+		__entry->timer_idx		= arch_timer_ctx_index(ctx);
+		__entry->should_fire		= should_fire;
+	),
+
+	TP_printk("arch_timer_ctx_index: %d (should_fire: %d)",
+		  __entry->timer_idx, __entry->should_fire)
+);
+
+TRACE_EVENT(kvm_nested_eret,
+	TP_PROTO(struct kvm_vcpu *vcpu, unsigned long elr_el2,
+		 unsigned long spsr_el2),
+	TP_ARGS(vcpu, elr_el2, spsr_el2),
+
+	TP_STRUCT__entry(
+		__field(struct kvm_vcpu *,	vcpu)
+		__field(unsigned long,		elr_el2)
+		__field(unsigned long,		spsr_el2)
+		__field(unsigned long,		target_mode)
+		__field(unsigned long,		hcr_el2)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu = vcpu;
+		__entry->elr_el2 = elr_el2;
+		__entry->spsr_el2 = spsr_el2;
+		__entry->target_mode = spsr_el2 & (PSR_MODE_MASK | PSR_MODE32_BIT);
+		__entry->hcr_el2 = __vcpu_sys_reg(vcpu, HCR_EL2);
+	),
+
+	TP_printk("elr_el2: 0x%lx spsr_el2: 0x%08lx (M: %s) hcr_el2: %lx",
+		  __entry->elr_el2, __entry->spsr_el2,
+		  __print_symbolic(__entry->target_mode, kvm_mode_names),
+		  __entry->hcr_el2)
+);
+
+TRACE_EVENT(kvm_inject_nested_exception,
+	TP_PROTO(struct kvm_vcpu *vcpu, u64 esr_el2, int type),
+	TP_ARGS(vcpu, esr_el2, type),
+
+	TP_STRUCT__entry(
+		__field(struct kvm_vcpu *,		vcpu)
+		__field(unsigned long,			esr_el2)
+		__field(int,				type)
+		__field(unsigned long,			spsr_el2)
+		__field(unsigned long,			pc)
+		__field(unsigned long,			source_mode)
+		__field(unsigned long,			hcr_el2)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu = vcpu;
+		__entry->esr_el2 = esr_el2;
+		__entry->type = type;
+		__entry->spsr_el2 = *vcpu_cpsr(vcpu);
+		__entry->pc = *vcpu_pc(vcpu);
+		__entry->source_mode = *vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT);
+		__entry->hcr_el2 = __vcpu_sys_reg(vcpu, HCR_EL2);
+	),
+
+	TP_printk("%s: esr_el2 0x%lx elr_el2: 0x%lx spsr_el2: 0x%08lx (M: %s) hcr_el2: %lx",
+		  __print_symbolic(__entry->type, kvm_exception_type_names),
+		  __entry->esr_el2, __entry->pc, __entry->spsr_el2,
+		  __print_symbolic(__entry->source_mode, kvm_mode_names),
+		  __entry->hcr_el2)
+);
+
+TRACE_EVENT(kvm_forward_sysreg_trap,
+	    TP_PROTO(struct kvm_vcpu *vcpu, u32 sysreg, bool is_read),
+	    TP_ARGS(vcpu, sysreg, is_read),
+
+	    TP_STRUCT__entry(
+		__field(u64,	pc)
+		__field(u32,	sysreg)
+		__field(bool,	is_read)
+	    ),
+
+	    TP_fast_assign(
+		__entry->pc = *vcpu_pc(vcpu);
+		__entry->sysreg = sysreg;
+		__entry->is_read = is_read;
+	    ),
+
+	    TP_printk("%llx %c (%d,%d,%d,%d,%d)",
+		      __entry->pc,
+		      __entry->is_read ? 'R' : 'W',
+		      sys_reg_Op0(__entry->sysreg),
+		      sys_reg_Op1(__entry->sysreg),
+		      sys_reg_CRn(__entry->sysreg),
+		      sys_reg_CRm(__entry->sysreg),
+		      sys_reg_Op2(__entry->sysreg))
+);
+
+#endif /* _TRACE_ARM_ARM64_KVM_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace_arm
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/arm64/kvm/trace_handle_exit.h b/arch/arm64/kvm/trace_handle_exit.h
new file mode 100644
index 000000000..064a58c19
--- /dev/null
+++ b/arch/arm64/kvm/trace_handle_exit.h
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if !defined(_TRACE_HANDLE_EXIT_ARM64_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_HANDLE_EXIT_ARM64_KVM_H
+
+#include <linux/tracepoint.h>
+#include "sys_regs.h"
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+
+TRACE_EVENT(kvm_wfx_arm64,
+	TP_PROTO(unsigned long vcpu_pc, bool is_wfe),
+	TP_ARGS(vcpu_pc, is_wfe),
+
+	TP_STRUCT__entry(
+		__field(unsigned long,	vcpu_pc)
+		__field(bool,		is_wfe)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc = vcpu_pc;
+		__entry->is_wfe  = is_wfe;
+	),
+
+	TP_printk("guest executed wf%c at: 0x%016lx",
+		  __entry->is_wfe ? 'e' : 'i', __entry->vcpu_pc)
+);
+
+TRACE_EVENT(kvm_hvc_arm64,
+	TP_PROTO(unsigned long vcpu_pc, unsigned long r0, unsigned long imm),
+	TP_ARGS(vcpu_pc, r0, imm),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, vcpu_pc)
+		__field(unsigned long, r0)
+		__field(unsigned long, imm)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc = vcpu_pc;
+		__entry->r0 = r0;
+		__entry->imm = imm;
+	),
+
+	TP_printk("HVC at 0x%016lx (r0: 0x%016lx, imm: 0x%lx)",
+		  __entry->vcpu_pc, __entry->r0, __entry->imm)
+);
+
+TRACE_EVENT(kvm_arm_setup_debug,
+	TP_PROTO(struct kvm_vcpu *vcpu, __u32 guest_debug),
+	TP_ARGS(vcpu, guest_debug),
+
+	TP_STRUCT__entry(
+		__field(struct kvm_vcpu *, vcpu)
+		__field(__u32, guest_debug)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu = vcpu;
+		__entry->guest_debug = guest_debug;
+	),
+
+	TP_printk("vcpu: %p, flags: 0x%08x", __entry->vcpu, __entry->guest_debug)
+);
+
+TRACE_EVENT(kvm_arm_clear_debug,
+	TP_PROTO(__u32 guest_debug),
+	TP_ARGS(guest_debug),
+
+	TP_STRUCT__entry(
+		__field(__u32, guest_debug)
+	),
+
+	TP_fast_assign(
+		__entry->guest_debug = guest_debug;
+	),
+
+	TP_printk("flags: 0x%08x", __entry->guest_debug)
+);
+
+/*
+ * The dreg32 name is a leftover from a distant past. This will really
+ * output a 64bit value...
+ */
+TRACE_EVENT(kvm_arm_set_dreg32,
+	TP_PROTO(const char *name, __u64 value),
+	TP_ARGS(name, value),
+
+	TP_STRUCT__entry(
+		__field(const char *, name)
+		__field(__u64, value)
+	),
+
+	TP_fast_assign(
+		__entry->name = name;
+		__entry->value = value;
+	),
+
+	TP_printk("%s: 0x%llx", __entry->name, __entry->value)
+);
+
+TRACE_DEFINE_SIZEOF(__u64);
+
+TRACE_EVENT(kvm_arm_set_regset,
+	TP_PROTO(const char *type, int len, __u64 *control, __u64 *value),
+	TP_ARGS(type, len, control, value),
+	TP_STRUCT__entry(
+		__field(const char *, name)
+		__field(int, len)
+		__array(u64, ctrls, 16)
+		__array(u64, values, 16)
+	),
+	TP_fast_assign(
+		__entry->name = type;
+		__entry->len = len;
+		memcpy(__entry->ctrls, control, len << 3);
+		memcpy(__entry->values, value, len << 3);
+	),
+	TP_printk("%d %s CTRL:%s VALUE:%s", __entry->len, __entry->name,
+		__print_array(__entry->ctrls, __entry->len, sizeof(__u64)),
+		__print_array(__entry->values, __entry->len, sizeof(__u64)))
+);
+
+TRACE_EVENT(trap_reg,
+	TP_PROTO(const char *fn, int reg, bool is_write, u64 write_value),
+	TP_ARGS(fn, reg, is_write, write_value),
+
+	TP_STRUCT__entry(
+		__field(const char *, fn)
+		__field(int, reg)
+		__field(bool, is_write)
+		__field(u64, write_value)
+	),
+
+	TP_fast_assign(
+		__entry->fn = fn;
+		__entry->reg = reg;
+		__entry->is_write = is_write;
+		__entry->write_value = write_value;
+	),
+
+	TP_printk("%s %s reg %d (0x%016llx)", __entry->fn,  __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
+);
+
+TRACE_EVENT(kvm_handle_sys_reg,
+	TP_PROTO(unsigned long hsr),
+	TP_ARGS(hsr),
+
+	TP_STRUCT__entry(
+		__field(unsigned long,	hsr)
+	),
+
+	TP_fast_assign(
+		__entry->hsr = hsr;
+	),
+
+	TP_printk("HSR 0x%08lx", __entry->hsr)
+);
+
+TRACE_EVENT(kvm_sys_access,
+	TP_PROTO(unsigned long vcpu_pc, struct sys_reg_params *params, const struct sys_reg_desc *reg),
+	TP_ARGS(vcpu_pc, params, reg),
+
+	TP_STRUCT__entry(
+		__field(unsigned long,			vcpu_pc)
+		__field(bool,				is_write)
+		__field(const char *,			name)
+		__field(u8,				Op0)
+		__field(u8,				Op1)
+		__field(u8,				CRn)
+		__field(u8,				CRm)
+		__field(u8,				Op2)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_pc = vcpu_pc;
+		__entry->is_write = params->is_write;
+		__entry->name = reg->name;
+		__entry->Op0 = reg->Op0;
+		__entry->Op0 = reg->Op0;
+		__entry->Op1 = reg->Op1;
+		__entry->CRn = reg->CRn;
+		__entry->CRm = reg->CRm;
+		__entry->Op2 = reg->Op2;
+	),
+
+	TP_printk("PC: %lx %s (%d,%d,%d,%d,%d) %s",
+		  __entry->vcpu_pc, __entry->name ?: "UNKN",
+		  __entry->Op0, __entry->Op1, __entry->CRn,
+		  __entry->CRm, __entry->Op2,
+		  __entry->is_write ? "write" : "read")
+);
+
+TRACE_EVENT(kvm_set_guest_debug,
+	TP_PROTO(struct kvm_vcpu *vcpu, __u32 guest_debug),
+	TP_ARGS(vcpu, guest_debug),
+
+	TP_STRUCT__entry(
+		__field(struct kvm_vcpu *, vcpu)
+		__field(__u32, guest_debug)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu = vcpu;
+		__entry->guest_debug = guest_debug;
+	),
+
+	TP_printk("vcpu: %p, flags: 0x%08x", __entry->vcpu, __entry->guest_debug)
+);
+
+#endif /* _TRACE_HANDLE_EXIT_ARM64_KVM_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace_handle_exit
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/arm64/kvm/trng.c b/arch/arm64/kvm/trng.c
new file mode 100644
index 000000000..99bdd7103
--- /dev/null
+++ b/arch/arm64/kvm/trng.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2020 Arm Ltd.
+
+#include <linux/arm-smccc.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_emulate.h>
+
+#include <kvm/arm_hypercalls.h>
+
+#define ARM_SMCCC_TRNG_VERSION_1_0	0x10000UL
+
+/* Those values are deliberately separate from the generic SMCCC definitions. */
+#define TRNG_SUCCESS			0UL
+#define TRNG_NOT_SUPPORTED		((unsigned long)-1)
+#define TRNG_INVALID_PARAMETER		((unsigned long)-2)
+#define TRNG_NO_ENTROPY			((unsigned long)-3)
+
+#define TRNG_MAX_BITS64			192
+
+static const uuid_t arm_smc_trng_uuid __aligned(4) = UUID_INIT(
+	0x0d21e000, 0x4384, 0x11eb, 0x80, 0x70, 0x52, 0x44, 0x55, 0x4e, 0x5a, 0x4c);
+
+static int kvm_trng_do_rnd(struct kvm_vcpu *vcpu, int size)
+{
+	DECLARE_BITMAP(bits, TRNG_MAX_BITS64);
+	u32 num_bits = smccc_get_arg1(vcpu);
+	int i;
+
+	if (num_bits > 3 * size) {
+		smccc_set_retval(vcpu, TRNG_INVALID_PARAMETER, 0, 0, 0);
+		return 1;
+	}
+
+	/* get as many bits as we need to fulfil the request */
+	for (i = 0; i < DIV_ROUND_UP(num_bits, BITS_PER_LONG); i++)
+		bits[i] = get_random_long();
+
+	bitmap_clear(bits, num_bits, TRNG_MAX_BITS64 - num_bits);
+
+	if (size == 32)
+		smccc_set_retval(vcpu, TRNG_SUCCESS, lower_32_bits(bits[1]),
+				 upper_32_bits(bits[0]), lower_32_bits(bits[0]));
+	else
+		smccc_set_retval(vcpu, TRNG_SUCCESS, bits[2], bits[1], bits[0]);
+
+	memzero_explicit(bits, sizeof(bits));
+	return 1;
+}
+
+int kvm_trng_call(struct kvm_vcpu *vcpu)
+{
+	const __le32 *u = (__le32 *)arm_smc_trng_uuid.b;
+	u32 func_id = smccc_get_function(vcpu);
+	unsigned long val = TRNG_NOT_SUPPORTED;
+	int size = 64;
+
+	switch (func_id) {
+	case ARM_SMCCC_TRNG_VERSION:
+		val = ARM_SMCCC_TRNG_VERSION_1_0;
+		break;
+	case ARM_SMCCC_TRNG_FEATURES:
+		switch (smccc_get_arg1(vcpu)) {
+		case ARM_SMCCC_TRNG_VERSION:
+		case ARM_SMCCC_TRNG_FEATURES:
+		case ARM_SMCCC_TRNG_GET_UUID:
+		case ARM_SMCCC_TRNG_RND32:
+		case ARM_SMCCC_TRNG_RND64:
+			val = TRNG_SUCCESS;
+		}
+		break;
+	case ARM_SMCCC_TRNG_GET_UUID:
+		smccc_set_retval(vcpu, le32_to_cpu(u[0]), le32_to_cpu(u[1]),
+				 le32_to_cpu(u[2]), le32_to_cpu(u[3]));
+		return 1;
+	case ARM_SMCCC_TRNG_RND32:
+		size = 32;
+		fallthrough;
+	case ARM_SMCCC_TRNG_RND64:
+		return kvm_trng_do_rnd(vcpu, size);
+	}
+
+	smccc_set_retval(vcpu, val, 0, 0, 0);
+	return 1;
+}
diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c
new file mode 100644
index 000000000..91b22a014
--- /dev/null
+++ b/arch/arm64/kvm/va_layout.c
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/random.h>
+#include <linux/memblock.h>
+#include <asm/alternative.h>
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/kvm_mmu.h>
+#include <asm/memory.h>
+
+/*
+ * The LSB of the HYP VA tag
+ */
+static u8 tag_lsb;
+/*
+ * The HYP VA tag value with the region bit
+ */
+static u64 tag_val;
+static u64 va_mask;
+
+/*
+ * Compute HYP VA by using the same computation as kern_hyp_va().
+ */
+static u64 __early_kern_hyp_va(u64 addr)
+{
+	addr &= va_mask;
+	addr |= tag_val << tag_lsb;
+	return addr;
+}
+
+/*
+ * Store a hyp VA <-> PA offset into a EL2-owned variable.
+ */
+static void init_hyp_physvirt_offset(void)
+{
+	u64 kern_va, hyp_va;
+
+	/* Compute the offset from the hyp VA and PA of a random symbol. */
+	kern_va = (u64)lm_alias(__hyp_text_start);
+	hyp_va = __early_kern_hyp_va(kern_va);
+	hyp_physvirt_offset = (s64)__pa(kern_va) - (s64)hyp_va;
+}
+
+/*
+ * We want to generate a hyp VA with the following format (with V ==
+ * vabits_actual):
+ *
+ *  63 ... V |     V-1    | V-2 .. tag_lsb | tag_lsb - 1 .. 0
+ *  ---------------------------------------------------------
+ * | 0000000 | hyp_va_msb |   random tag   |  kern linear VA |
+ *           |--------- tag_val -----------|----- va_mask ---|
+ *
+ * which does not conflict with the idmap regions.
+ */
+__init void kvm_compute_layout(void)
+{
+	phys_addr_t idmap_addr = __pa_symbol(__hyp_idmap_text_start);
+	u64 hyp_va_msb;
+
+	/* Where is my RAM region? */
+	hyp_va_msb  = idmap_addr & BIT(vabits_actual - 1);
+	hyp_va_msb ^= BIT(vabits_actual - 1);
+
+	tag_lsb = fls64((u64)phys_to_virt(memblock_start_of_DRAM()) ^
+			(u64)(high_memory - 1));
+
+	va_mask = GENMASK_ULL(tag_lsb - 1, 0);
+	tag_val = hyp_va_msb;
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && tag_lsb != (vabits_actual - 1)) {
+		/* We have some free bits to insert a random tag. */
+		tag_val |= get_random_long() & GENMASK_ULL(vabits_actual - 2, tag_lsb);
+	}
+	tag_val >>= tag_lsb;
+
+	init_hyp_physvirt_offset();
+}
+
+/*
+ * The .hyp.reloc ELF section contains a list of kimg positions that
+ * contains kimg VAs but will be accessed only in hyp execution context.
+ * Convert them to hyp VAs. See gen-hyprel.c for more details.
+ */
+__init void kvm_apply_hyp_relocations(void)
+{
+	int32_t *rel;
+	int32_t *begin = (int32_t *)__hyp_reloc_begin;
+	int32_t *end = (int32_t *)__hyp_reloc_end;
+
+	for (rel = begin; rel < end; ++rel) {
+		uintptr_t *ptr, kimg_va;
+
+		/*
+		 * Each entry contains a 32-bit relative offset from itself
+		 * to a kimg VA position.
+		 */
+		ptr = (uintptr_t *)lm_alias((char *)rel + *rel);
+
+		/* Read the kimg VA value at the relocation address. */
+		kimg_va = *ptr;
+
+		/* Convert to hyp VA and store back to the relocation address. */
+		*ptr = __early_kern_hyp_va((uintptr_t)lm_alias(kimg_va));
+	}
+}
+
+static u32 compute_instruction(int n, u32 rd, u32 rn)
+{
+	u32 insn = AARCH64_BREAK_FAULT;
+
+	switch (n) {
+	case 0:
+		insn = aarch64_insn_gen_logical_immediate(AARCH64_INSN_LOGIC_AND,
+							  AARCH64_INSN_VARIANT_64BIT,
+							  rn, rd, va_mask);
+		break;
+
+	case 1:
+		/* ROR is a variant of EXTR with Rm = Rn */
+		insn = aarch64_insn_gen_extr(AARCH64_INSN_VARIANT_64BIT,
+					     rn, rn, rd,
+					     tag_lsb);
+		break;
+
+	case 2:
+		insn = aarch64_insn_gen_add_sub_imm(rd, rn,
+						    tag_val & GENMASK(11, 0),
+						    AARCH64_INSN_VARIANT_64BIT,
+						    AARCH64_INSN_ADSB_ADD);
+		break;
+
+	case 3:
+		insn = aarch64_insn_gen_add_sub_imm(rd, rn,
+						    tag_val & GENMASK(23, 12),
+						    AARCH64_INSN_VARIANT_64BIT,
+						    AARCH64_INSN_ADSB_ADD);
+		break;
+
+	case 4:
+		/* ROR is a variant of EXTR with Rm = Rn */
+		insn = aarch64_insn_gen_extr(AARCH64_INSN_VARIANT_64BIT,
+					     rn, rn, rd, 64 - tag_lsb);
+		break;
+	}
+
+	return insn;
+}
+
+void __init kvm_update_va_mask(struct alt_instr *alt,
+			       __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	int i;
+
+	BUG_ON(nr_inst != 5);
+
+	for (i = 0; i < nr_inst; i++) {
+		u32 rd, rn, insn, oinsn;
+
+		/*
+		 * VHE doesn't need any address translation, let's NOP
+		 * everything.
+		 *
+		 * Alternatively, if the tag is zero (because the layout
+		 * dictates it and we don't have any spare bits in the
+		 * address), NOP everything after masking the kernel VA.
+		 */
+		if (cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN) || (!tag_val && i > 0)) {
+			updptr[i] = cpu_to_le32(aarch64_insn_gen_nop());
+			continue;
+		}
+
+		oinsn = le32_to_cpu(origptr[i]);
+		rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, oinsn);
+		rn = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RN, oinsn);
+
+		insn = compute_instruction(i, rd, rn);
+		BUG_ON(insn == AARCH64_BREAK_FAULT);
+
+		updptr[i] = cpu_to_le32(insn);
+	}
+}
+
+void kvm_patch_vector_branch(struct alt_instr *alt,
+			     __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u64 addr;
+	u32 insn;
+
+	BUG_ON(nr_inst != 4);
+
+	if (!cpus_have_cap(ARM64_SPECTRE_V3A) ||
+	    WARN_ON_ONCE(cpus_have_cap(ARM64_HAS_VIRT_HOST_EXTN)))
+		return;
+
+	/*
+	 * Compute HYP VA by using the same computation as kern_hyp_va()
+	 */
+	addr = __early_kern_hyp_va((u64)kvm_ksym_ref(__kvm_hyp_vector));
+
+	/* Use PC[10:7] to branch to the same vector in KVM */
+	addr |= ((u64)origptr & GENMASK_ULL(10, 7));
+
+	/*
+	 * Branch over the preamble in order to avoid the initial store on
+	 * the stack (which we already perform in the hardening vectors).
+	 */
+	addr += KVM_VECTOR_PREAMBLE;
+
+	/* movz x0, #(addr & 0xffff) */
+	insn = aarch64_insn_gen_movewide(AARCH64_INSN_REG_0,
+					 (u16)addr,
+					 0,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_ZERO);
+	*updptr++ = cpu_to_le32(insn);
+
+	/* movk x0, #((addr >> 16) & 0xffff), lsl #16 */
+	insn = aarch64_insn_gen_movewide(AARCH64_INSN_REG_0,
+					 (u16)(addr >> 16),
+					 16,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_KEEP);
+	*updptr++ = cpu_to_le32(insn);
+
+	/* movk x0, #((addr >> 32) & 0xffff), lsl #32 */
+	insn = aarch64_insn_gen_movewide(AARCH64_INSN_REG_0,
+					 (u16)(addr >> 32),
+					 32,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_KEEP);
+	*updptr++ = cpu_to_le32(insn);
+
+	/* br x0 */
+	insn = aarch64_insn_gen_branch_reg(AARCH64_INSN_REG_0,
+					   AARCH64_INSN_BRANCH_NOLINK);
+	*updptr++ = cpu_to_le32(insn);
+}
+
+static void generate_mov_q(u64 val, __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u32 insn, oinsn, rd;
+
+	BUG_ON(nr_inst != 4);
+
+	/* Compute target register */
+	oinsn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, oinsn);
+
+	/* movz rd, #(val & 0xffff) */
+	insn = aarch64_insn_gen_movewide(rd,
+					 (u16)val,
+					 0,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_ZERO);
+	*updptr++ = cpu_to_le32(insn);
+
+	/* movk rd, #((val >> 16) & 0xffff), lsl #16 */
+	insn = aarch64_insn_gen_movewide(rd,
+					 (u16)(val >> 16),
+					 16,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_KEEP);
+	*updptr++ = cpu_to_le32(insn);
+
+	/* movk rd, #((val >> 32) & 0xffff), lsl #32 */
+	insn = aarch64_insn_gen_movewide(rd,
+					 (u16)(val >> 32),
+					 32,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_KEEP);
+	*updptr++ = cpu_to_le32(insn);
+
+	/* movk rd, #((val >> 48) & 0xffff), lsl #48 */
+	insn = aarch64_insn_gen_movewide(rd,
+					 (u16)(val >> 48),
+					 48,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_KEEP);
+	*updptr++ = cpu_to_le32(insn);
+}
+
+void kvm_get_kimage_voffset(struct alt_instr *alt,
+			    __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	generate_mov_q(kimage_voffset, origptr, updptr, nr_inst);
+}
+
+void kvm_compute_final_ctr_el0(struct alt_instr *alt,
+			       __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	generate_mov_q(read_sanitised_ftr_reg(SYS_CTR_EL0),
+		       origptr, updptr, nr_inst);
+}
diff --git a/arch/arm64/kvm/vgic-sys-reg-v3.c b/arch/arm64/kvm/vgic-sys-reg-v3.c
new file mode 100644
index 000000000..9e7c486b4
--- /dev/null
+++ b/arch/arm64/kvm/vgic-sys-reg-v3.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VGIC system registers handling functions for AArch64 mode
+ */
+
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_emulate.h>
+#include "vgic/vgic.h"
+#include "sys_regs.h"
+
+static int set_gic_ctlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 val)
+{
+	u32 host_pri_bits, host_id_bits, host_seis, host_a3v, seis, a3v;
+	struct vgic_cpu *vgic_v3_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	/*
+	 * Disallow restoring VM state if not supported by this
+	 * hardware.
+	 */
+	host_pri_bits = FIELD_GET(ICC_CTLR_EL1_PRI_BITS_MASK, val) + 1;
+	if (host_pri_bits > vgic_v3_cpu->num_pri_bits)
+		return -EINVAL;
+
+	vgic_v3_cpu->num_pri_bits = host_pri_bits;
+
+	host_id_bits = FIELD_GET(ICC_CTLR_EL1_ID_BITS_MASK, val);
+	if (host_id_bits > vgic_v3_cpu->num_id_bits)
+		return -EINVAL;
+
+	vgic_v3_cpu->num_id_bits = host_id_bits;
+
+	host_seis = FIELD_GET(ICH_VTR_SEIS_MASK, kvm_vgic_global_state.ich_vtr_el2);
+	seis = FIELD_GET(ICC_CTLR_EL1_SEIS_MASK, val);
+	if (host_seis != seis)
+		return -EINVAL;
+
+	host_a3v = FIELD_GET(ICH_VTR_A3V_MASK, kvm_vgic_global_state.ich_vtr_el2);
+	a3v = FIELD_GET(ICC_CTLR_EL1_A3V_MASK, val);
+	if (host_a3v != a3v)
+		return -EINVAL;
+
+	/*
+	 * Here set VMCR.CTLR in ICC_CTLR_EL1 layout.
+	 * The vgic_set_vmcr() will convert to ICH_VMCR layout.
+	 */
+	vmcr.cbpr = FIELD_GET(ICC_CTLR_EL1_CBPR_MASK, val);
+	vmcr.eoim = FIELD_GET(ICC_CTLR_EL1_EOImode_MASK, val);
+	vgic_set_vmcr(vcpu, &vmcr);
+
+	return 0;
+}
+
+static int get_gic_ctlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 *valp)
+{
+	struct vgic_cpu *vgic_v3_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_vmcr vmcr;
+	u64 val;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	val = 0;
+	val |= FIELD_PREP(ICC_CTLR_EL1_PRI_BITS_MASK, vgic_v3_cpu->num_pri_bits - 1);
+	val |= FIELD_PREP(ICC_CTLR_EL1_ID_BITS_MASK, vgic_v3_cpu->num_id_bits);
+	val |= FIELD_PREP(ICC_CTLR_EL1_SEIS_MASK,
+			  FIELD_GET(ICH_VTR_SEIS_MASK,
+				    kvm_vgic_global_state.ich_vtr_el2));
+	val |= FIELD_PREP(ICC_CTLR_EL1_A3V_MASK,
+			  FIELD_GET(ICH_VTR_A3V_MASK, kvm_vgic_global_state.ich_vtr_el2));
+	/*
+	 * The VMCR.CTLR value is in ICC_CTLR_EL1 layout.
+	 * Extract it directly using ICC_CTLR_EL1 reg definitions.
+	 */
+	val |= FIELD_PREP(ICC_CTLR_EL1_CBPR_MASK, vmcr.cbpr);
+	val |= FIELD_PREP(ICC_CTLR_EL1_EOImode_MASK, vmcr.eoim);
+
+	*valp = val;
+
+	return 0;
+}
+
+static int set_gic_pmr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		       u64 val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	vmcr.pmr = FIELD_GET(ICC_PMR_EL1_MASK, val);
+	vgic_set_vmcr(vcpu, &vmcr);
+
+	return 0;
+}
+
+static int get_gic_pmr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		       u64 *val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	*val = FIELD_PREP(ICC_PMR_EL1_MASK, vmcr.pmr);
+
+	return 0;
+}
+
+static int set_gic_bpr0(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	vmcr.bpr = FIELD_GET(ICC_BPR0_EL1_MASK, val);
+	vgic_set_vmcr(vcpu, &vmcr);
+
+	return 0;
+}
+
+static int get_gic_bpr0(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 *val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	*val = FIELD_PREP(ICC_BPR0_EL1_MASK, vmcr.bpr);
+
+	return 0;
+}
+
+static int set_gic_bpr1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	if (!vmcr.cbpr) {
+		vmcr.abpr = FIELD_GET(ICC_BPR1_EL1_MASK, val);
+		vgic_set_vmcr(vcpu, &vmcr);
+	}
+
+	return 0;
+}
+
+static int get_gic_bpr1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 *val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	if (!vmcr.cbpr)
+		*val = FIELD_PREP(ICC_BPR1_EL1_MASK, vmcr.abpr);
+	else
+		*val = min((vmcr.bpr + 1), 7U);
+
+
+	return 0;
+}
+
+static int set_gic_grpen0(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	vmcr.grpen0 = FIELD_GET(ICC_IGRPEN0_EL1_MASK, val);
+	vgic_set_vmcr(vcpu, &vmcr);
+
+	return 0;
+}
+
+static int get_gic_grpen0(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 *val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	*val = FIELD_PREP(ICC_IGRPEN0_EL1_MASK, vmcr.grpen0);
+
+	return 0;
+}
+
+static int set_gic_grpen1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	vmcr.grpen1 = FIELD_GET(ICC_IGRPEN1_EL1_MASK, val);
+	vgic_set_vmcr(vcpu, &vmcr);
+
+	return 0;
+}
+
+static int get_gic_grpen1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			  u64 *val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+	*val = FIELD_GET(ICC_IGRPEN1_EL1_MASK, vmcr.grpen1);
+
+	return 0;
+}
+
+static void set_apr_reg(struct kvm_vcpu *vcpu, u64 val, u8 apr, u8 idx)
+{
+	struct vgic_v3_cpu_if *vgicv3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	if (apr)
+		vgicv3->vgic_ap1r[idx] = val;
+	else
+		vgicv3->vgic_ap0r[idx] = val;
+}
+
+static u64 get_apr_reg(struct kvm_vcpu *vcpu, u8 apr, u8 idx)
+{
+	struct vgic_v3_cpu_if *vgicv3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	if (apr)
+		return vgicv3->vgic_ap1r[idx];
+	else
+		return vgicv3->vgic_ap0r[idx];
+}
+
+static int set_gic_ap0r(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 val)
+
+{
+	u8 idx = r->Op2 & 3;
+
+	if (idx > vgic_v3_max_apr_idx(vcpu))
+		return -EINVAL;
+
+	set_apr_reg(vcpu, val, 0, idx);
+	return 0;
+}
+
+static int get_gic_ap0r(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 *val)
+{
+	u8 idx = r->Op2 & 3;
+
+	if (idx > vgic_v3_max_apr_idx(vcpu))
+		return -EINVAL;
+
+	*val = get_apr_reg(vcpu, 0, idx);
+
+	return 0;
+}
+
+static int set_gic_ap1r(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 val)
+
+{
+	u8 idx = r->Op2 & 3;
+
+	if (idx > vgic_v3_max_apr_idx(vcpu))
+		return -EINVAL;
+
+	set_apr_reg(vcpu, val, 1, idx);
+	return 0;
+}
+
+static int get_gic_ap1r(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+			u64 *val)
+{
+	u8 idx = r->Op2 & 3;
+
+	if (idx > vgic_v3_max_apr_idx(vcpu))
+		return -EINVAL;
+
+	*val = get_apr_reg(vcpu, 1, idx);
+
+	return 0;
+}
+
+static int set_gic_sre(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		       u64 val)
+{
+	/* Validate SRE bit */
+	if (!(val & ICC_SRE_EL1_SRE))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int get_gic_sre(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		       u64 *val)
+{
+	struct vgic_v3_cpu_if *vgicv3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	*val = vgicv3->vgic_sre;
+
+	return 0;
+}
+
+static const struct sys_reg_desc gic_v3_icc_reg_descs[] = {
+	{ SYS_DESC(SYS_ICC_PMR_EL1),
+	  .set_user = set_gic_pmr, .get_user = get_gic_pmr, },
+	{ SYS_DESC(SYS_ICC_BPR0_EL1),
+	  .set_user = set_gic_bpr0, .get_user = get_gic_bpr0, },
+	{ SYS_DESC(SYS_ICC_AP0R0_EL1),
+	  .set_user = set_gic_ap0r, .get_user = get_gic_ap0r, },
+	{ SYS_DESC(SYS_ICC_AP0R1_EL1),
+	  .set_user = set_gic_ap0r, .get_user = get_gic_ap0r, },
+	{ SYS_DESC(SYS_ICC_AP0R2_EL1),
+	  .set_user = set_gic_ap0r, .get_user = get_gic_ap0r, },
+	{ SYS_DESC(SYS_ICC_AP0R3_EL1),
+	  .set_user = set_gic_ap0r, .get_user = get_gic_ap0r, },
+	{ SYS_DESC(SYS_ICC_AP1R0_EL1),
+	  .set_user = set_gic_ap1r, .get_user = get_gic_ap1r, },
+	{ SYS_DESC(SYS_ICC_AP1R1_EL1),
+	  .set_user = set_gic_ap1r, .get_user = get_gic_ap1r, },
+	{ SYS_DESC(SYS_ICC_AP1R2_EL1),
+	  .set_user = set_gic_ap1r, .get_user = get_gic_ap1r, },
+	{ SYS_DESC(SYS_ICC_AP1R3_EL1),
+	  .set_user = set_gic_ap1r, .get_user = get_gic_ap1r, },
+	{ SYS_DESC(SYS_ICC_BPR1_EL1),
+	  .set_user = set_gic_bpr1, .get_user = get_gic_bpr1, },
+	{ SYS_DESC(SYS_ICC_CTLR_EL1),
+	  .set_user = set_gic_ctlr, .get_user = get_gic_ctlr, },
+	{ SYS_DESC(SYS_ICC_SRE_EL1),
+	  .set_user = set_gic_sre, .get_user = get_gic_sre, },
+	{ SYS_DESC(SYS_ICC_IGRPEN0_EL1),
+	  .set_user = set_gic_grpen0, .get_user = get_gic_grpen0, },
+	{ SYS_DESC(SYS_ICC_IGRPEN1_EL1),
+	  .set_user = set_gic_grpen1, .get_user = get_gic_grpen1, },
+};
+
+static u64 attr_to_id(u64 attr)
+{
+	return ARM64_SYS_REG(FIELD_GET(KVM_REG_ARM_VGIC_SYSREG_OP0_MASK, attr),
+			     FIELD_GET(KVM_REG_ARM_VGIC_SYSREG_OP1_MASK, attr),
+			     FIELD_GET(KVM_REG_ARM_VGIC_SYSREG_CRN_MASK, attr),
+			     FIELD_GET(KVM_REG_ARM_VGIC_SYSREG_CRM_MASK, attr),
+			     FIELD_GET(KVM_REG_ARM_VGIC_SYSREG_OP2_MASK, attr));
+}
+
+int vgic_v3_has_cpu_sysregs_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
+{
+	if (get_reg_by_id(attr_to_id(attr->attr), gic_v3_icc_reg_descs,
+			  ARRAY_SIZE(gic_v3_icc_reg_descs)))
+		return 0;
+
+	return -ENXIO;
+}
+
+int vgic_v3_cpu_sysregs_uaccess(struct kvm_vcpu *vcpu,
+				struct kvm_device_attr *attr,
+				bool is_write)
+{
+	struct kvm_one_reg reg = {
+		.id	= attr_to_id(attr->attr),
+		.addr	= attr->addr,
+	};
+
+	if (is_write)
+		return kvm_sys_reg_set_user(vcpu, &reg, gic_v3_icc_reg_descs,
+					    ARRAY_SIZE(gic_v3_icc_reg_descs));
+	else
+		return kvm_sys_reg_get_user(vcpu, &reg, gic_v3_icc_reg_descs,
+					    ARRAY_SIZE(gic_v3_icc_reg_descs));
+}
diff --git a/arch/arm64/kvm/vgic/trace.h b/arch/arm64/kvm/vgic/trace.h
new file mode 100644
index 000000000..83c64401a
--- /dev/null
+++ b/arch/arm64/kvm/vgic/trace.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if !defined(_TRACE_VGIC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_VGIC_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+
+TRACE_EVENT(vgic_update_irq_pending,
+	TP_PROTO(unsigned long vcpu_id, __u32 irq, bool level),
+	TP_ARGS(vcpu_id, irq, level),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	vcpu_id	)
+		__field(	__u32,		irq	)
+		__field(	bool,		level	)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id	= vcpu_id;
+		__entry->irq		= irq;
+		__entry->level		= level;
+	),
+
+	TP_printk("VCPU: %ld, IRQ %d, level: %d",
+		  __entry->vcpu_id, __entry->irq, __entry->level)
+);
+
+#endif /* _TRACE_VGIC_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../arch/arm64/kvm/vgic
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/arm64/kvm/vgic/vgic-debug.c b/arch/arm64/kvm/vgic/vgic-debug.c
new file mode 100644
index 000000000..07aa04371
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-debug.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Linaro
+ * Author: Christoffer Dall <christoffer.dall@linaro.org>
+ */
+
+#include <linux/cpu.h>
+#include <linux/debugfs.h>
+#include <linux/interrupt.h>
+#include <linux/kvm_host.h>
+#include <linux/seq_file.h>
+#include <kvm/arm_vgic.h>
+#include <asm/kvm_mmu.h>
+#include "vgic.h"
+
+/*
+ * Structure to control looping through the entire vgic state.  We start at
+ * zero for each field and move upwards.  So, if dist_id is 0 we print the
+ * distributor info.  When dist_id is 1, we have already printed it and move
+ * on.
+ *
+ * When vcpu_id < nr_cpus we print the vcpu info until vcpu_id == nr_cpus and
+ * so on.
+ */
+struct vgic_state_iter {
+	int nr_cpus;
+	int nr_spis;
+	int nr_lpis;
+	int dist_id;
+	int vcpu_id;
+	int intid;
+	int lpi_idx;
+	u32 *lpi_array;
+};
+
+static void iter_next(struct vgic_state_iter *iter)
+{
+	if (iter->dist_id == 0) {
+		iter->dist_id++;
+		return;
+	}
+
+	iter->intid++;
+	if (iter->intid == VGIC_NR_PRIVATE_IRQS &&
+	    ++iter->vcpu_id < iter->nr_cpus)
+		iter->intid = 0;
+
+	if (iter->intid >= (iter->nr_spis + VGIC_NR_PRIVATE_IRQS)) {
+		if (iter->lpi_idx < iter->nr_lpis)
+			iter->intid = iter->lpi_array[iter->lpi_idx];
+		iter->lpi_idx++;
+	}
+}
+
+static void iter_init(struct kvm *kvm, struct vgic_state_iter *iter,
+		      loff_t pos)
+{
+	int nr_cpus = atomic_read(&kvm->online_vcpus);
+
+	memset(iter, 0, sizeof(*iter));
+
+	iter->nr_cpus = nr_cpus;
+	iter->nr_spis = kvm->arch.vgic.nr_spis;
+	if (kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		iter->nr_lpis = vgic_copy_lpi_list(kvm, NULL, &iter->lpi_array);
+		if (iter->nr_lpis < 0)
+			iter->nr_lpis = 0;
+	}
+
+	/* Fast forward to the right position if needed */
+	while (pos--)
+		iter_next(iter);
+}
+
+static bool end_of_vgic(struct vgic_state_iter *iter)
+{
+	return iter->dist_id > 0 &&
+		iter->vcpu_id == iter->nr_cpus &&
+		iter->intid >= (iter->nr_spis + VGIC_NR_PRIVATE_IRQS) &&
+		iter->lpi_idx > iter->nr_lpis;
+}
+
+static void *vgic_debug_start(struct seq_file *s, loff_t *pos)
+{
+	struct kvm *kvm = s->private;
+	struct vgic_state_iter *iter;
+
+	mutex_lock(&kvm->arch.config_lock);
+	iter = kvm->arch.vgic.iter;
+	if (iter) {
+		iter = ERR_PTR(-EBUSY);
+		goto out;
+	}
+
+	iter = kmalloc(sizeof(*iter), GFP_KERNEL);
+	if (!iter) {
+		iter = ERR_PTR(-ENOMEM);
+		goto out;
+	}
+
+	iter_init(kvm, iter, *pos);
+	kvm->arch.vgic.iter = iter;
+
+	if (end_of_vgic(iter))
+		iter = NULL;
+out:
+	mutex_unlock(&kvm->arch.config_lock);
+	return iter;
+}
+
+static void *vgic_debug_next(struct seq_file *s, void *v, loff_t *pos)
+{
+	struct kvm *kvm = s->private;
+	struct vgic_state_iter *iter = kvm->arch.vgic.iter;
+
+	++*pos;
+	iter_next(iter);
+	if (end_of_vgic(iter))
+		iter = NULL;
+	return iter;
+}
+
+static void vgic_debug_stop(struct seq_file *s, void *v)
+{
+	struct kvm *kvm = s->private;
+	struct vgic_state_iter *iter;
+
+	/*
+	 * If the seq file wasn't properly opened, there's nothing to clearn
+	 * up.
+	 */
+	if (IS_ERR(v))
+		return;
+
+	mutex_lock(&kvm->arch.config_lock);
+	iter = kvm->arch.vgic.iter;
+	kfree(iter->lpi_array);
+	kfree(iter);
+	kvm->arch.vgic.iter = NULL;
+	mutex_unlock(&kvm->arch.config_lock);
+}
+
+static void print_dist_state(struct seq_file *s, struct vgic_dist *dist)
+{
+	bool v3 = dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3;
+
+	seq_printf(s, "Distributor\n");
+	seq_printf(s, "===========\n");
+	seq_printf(s, "vgic_model:\t%s\n", v3 ? "GICv3" : "GICv2");
+	seq_printf(s, "nr_spis:\t%d\n", dist->nr_spis);
+	if (v3)
+		seq_printf(s, "nr_lpis:\t%d\n", dist->lpi_list_count);
+	seq_printf(s, "enabled:\t%d\n", dist->enabled);
+	seq_printf(s, "\n");
+
+	seq_printf(s, "P=pending_latch, L=line_level, A=active\n");
+	seq_printf(s, "E=enabled, H=hw, C=config (level=1, edge=0)\n");
+	seq_printf(s, "G=group\n");
+}
+
+static void print_header(struct seq_file *s, struct vgic_irq *irq,
+			 struct kvm_vcpu *vcpu)
+{
+	int id = 0;
+	char *hdr = "SPI ";
+
+	if (vcpu) {
+		hdr = "VCPU";
+		id = vcpu->vcpu_id;
+	}
+
+	seq_printf(s, "\n");
+	seq_printf(s, "%s%2d TYP   ID TGT_ID PLAEHCG     HWID   TARGET SRC PRI VCPU_ID\n", hdr, id);
+	seq_printf(s, "----------------------------------------------------------------\n");
+}
+
+static void print_irq_state(struct seq_file *s, struct vgic_irq *irq,
+			    struct kvm_vcpu *vcpu)
+{
+	char *type;
+	bool pending;
+
+	if (irq->intid < VGIC_NR_SGIS)
+		type = "SGI";
+	else if (irq->intid < VGIC_NR_PRIVATE_IRQS)
+		type = "PPI";
+	else if (irq->intid < VGIC_MAX_SPI)
+		type = "SPI";
+	else
+		type = "LPI";
+
+	if (irq->intid ==0 || irq->intid == VGIC_NR_PRIVATE_IRQS)
+		print_header(s, irq, vcpu);
+
+	pending = irq->pending_latch;
+	if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+		int err;
+
+		err = irq_get_irqchip_state(irq->host_irq,
+					    IRQCHIP_STATE_PENDING,
+					    &pending);
+		WARN_ON_ONCE(err);
+	}
+
+	seq_printf(s, "       %s %4d "
+		      "    %2d "
+		      "%d%d%d%d%d%d%d "
+		      "%8d "
+		      "%8x "
+		      " %2x "
+		      "%3d "
+		      "     %2d "
+		      "\n",
+			type, irq->intid,
+			(irq->target_vcpu) ? irq->target_vcpu->vcpu_id : -1,
+			pending,
+			irq->line_level,
+			irq->active,
+			irq->enabled,
+			irq->hw,
+			irq->config == VGIC_CONFIG_LEVEL,
+			irq->group,
+			irq->hwintid,
+			irq->mpidr,
+			irq->source,
+			irq->priority,
+			(irq->vcpu) ? irq->vcpu->vcpu_id : -1);
+}
+
+static int vgic_debug_show(struct seq_file *s, void *v)
+{
+	struct kvm *kvm = s->private;
+	struct vgic_state_iter *iter = v;
+	struct vgic_irq *irq;
+	struct kvm_vcpu *vcpu = NULL;
+	unsigned long flags;
+
+	if (iter->dist_id == 0) {
+		print_dist_state(s, &kvm->arch.vgic);
+		return 0;
+	}
+
+	if (!kvm->arch.vgic.initialized)
+		return 0;
+
+	if (iter->vcpu_id < iter->nr_cpus)
+		vcpu = kvm_get_vcpu(kvm, iter->vcpu_id);
+
+	irq = vgic_get_irq(kvm, vcpu, iter->intid);
+	if (!irq) {
+		seq_printf(s, "       LPI %4d freed\n", iter->intid);
+		return 0;
+	}
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	print_irq_state(s, irq, vcpu);
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+	vgic_put_irq(kvm, irq);
+	return 0;
+}
+
+static const struct seq_operations vgic_debug_sops = {
+	.start = vgic_debug_start,
+	.next  = vgic_debug_next,
+	.stop  = vgic_debug_stop,
+	.show  = vgic_debug_show
+};
+
+DEFINE_SEQ_ATTRIBUTE(vgic_debug);
+
+void vgic_debug_init(struct kvm *kvm)
+{
+	debugfs_create_file("vgic-state", 0444, kvm->debugfs_dentry, kvm,
+			    &vgic_debug_fops);
+}
+
+void vgic_debug_destroy(struct kvm *kvm)
+{
+}
diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c
new file mode 100644
index 000000000..e949e1d0f
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-init.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/cpu.h>
+#include <linux/kvm_host.h>
+#include <kvm/arm_vgic.h>
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_mmu.h>
+#include "vgic.h"
+
+/*
+ * Initialization rules: there are multiple stages to the vgic
+ * initialization, both for the distributor and the CPU interfaces.  The basic
+ * idea is that even though the VGIC is not functional or not requested from
+ * user space, the critical path of the run loop can still call VGIC functions
+ * that just won't do anything, without them having to check additional
+ * initialization flags to ensure they don't look at uninitialized data
+ * structures.
+ *
+ * Distributor:
+ *
+ * - kvm_vgic_early_init(): initialization of static data that doesn't
+ *   depend on any sizing information or emulation type. No allocation
+ *   is allowed there.
+ *
+ * - vgic_init(): allocation and initialization of the generic data
+ *   structures that depend on sizing information (number of CPUs,
+ *   number of interrupts). Also initializes the vcpu specific data
+ *   structures. Can be executed lazily for GICv2.
+ *
+ * CPU Interface:
+ *
+ * - kvm_vgic_vcpu_init(): initialization of static data that
+ *   doesn't depend on any sizing information or emulation type. No
+ *   allocation is allowed there.
+ */
+
+/* EARLY INIT */
+
+/**
+ * kvm_vgic_early_init() - Initialize static VGIC VCPU data structures
+ * @kvm: The VM whose VGIC districutor should be initialized
+ *
+ * Only do initialization of static structures that don't require any
+ * allocation or sizing information from userspace.  vgic_init() called
+ * kvm_vgic_dist_init() which takes care of the rest.
+ */
+void kvm_vgic_early_init(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+
+	INIT_LIST_HEAD(&dist->lpi_list_head);
+	INIT_LIST_HEAD(&dist->lpi_translation_cache);
+	raw_spin_lock_init(&dist->lpi_list_lock);
+}
+
+/* CREATION */
+
+/**
+ * kvm_vgic_create: triggered by the instantiation of the VGIC device by
+ * user space, either through the legacy KVM_CREATE_IRQCHIP ioctl (v2 only)
+ * or through the generic KVM_CREATE_DEVICE API ioctl.
+ * irqchip_in_kernel() tells you if this function succeeded or not.
+ * @kvm: kvm struct pointer
+ * @type: KVM_DEV_TYPE_ARM_VGIC_V[23]
+ */
+int kvm_vgic_create(struct kvm *kvm, u32 type)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+	int ret;
+
+	/*
+	 * This function is also called by the KVM_CREATE_IRQCHIP handler,
+	 * which had no chance yet to check the availability of the GICv2
+	 * emulation. So check this here again. KVM_CREATE_DEVICE does
+	 * the proper checks already.
+	 */
+	if (type == KVM_DEV_TYPE_ARM_VGIC_V2 &&
+		!kvm_vgic_global_state.can_emulate_gicv2)
+		return -ENODEV;
+
+	/* Must be held to avoid race with vCPU creation */
+	lockdep_assert_held(&kvm->lock);
+
+	ret = -EBUSY;
+	if (!lock_all_vcpus(kvm))
+		return ret;
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (irqchip_in_kernel(kvm)) {
+		ret = -EEXIST;
+		goto out_unlock;
+	}
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (vcpu_has_run_once(vcpu))
+			goto out_unlock;
+	}
+	ret = 0;
+
+	if (type == KVM_DEV_TYPE_ARM_VGIC_V2)
+		kvm->max_vcpus = VGIC_V2_MAX_CPUS;
+	else
+		kvm->max_vcpus = VGIC_V3_MAX_CPUS;
+
+	if (atomic_read(&kvm->online_vcpus) > kvm->max_vcpus) {
+		ret = -E2BIG;
+		goto out_unlock;
+	}
+
+	kvm->arch.vgic.in_kernel = true;
+	kvm->arch.vgic.vgic_model = type;
+
+	kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
+
+	if (type == KVM_DEV_TYPE_ARM_VGIC_V2)
+		kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
+	else
+		INIT_LIST_HEAD(&kvm->arch.vgic.rd_regions);
+
+out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
+	unlock_all_vcpus(kvm);
+	return ret;
+}
+
+/* INIT/DESTROY */
+
+/**
+ * kvm_vgic_dist_init: initialize the dist data structures
+ * @kvm: kvm struct pointer
+ * @nr_spis: number of spis, frozen by caller
+ */
+static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu0 = kvm_get_vcpu(kvm, 0);
+	int i;
+
+	dist->spis = kcalloc(nr_spis, sizeof(struct vgic_irq), GFP_KERNEL_ACCOUNT);
+	if (!dist->spis)
+		return  -ENOMEM;
+
+	/*
+	 * In the following code we do not take the irq struct lock since
+	 * no other action on irq structs can happen while the VGIC is
+	 * not initialized yet:
+	 * If someone wants to inject an interrupt or does a MMIO access, we
+	 * require prior initialization in case of a virtual GICv3 or trigger
+	 * initialization when using a virtual GICv2.
+	 */
+	for (i = 0; i < nr_spis; i++) {
+		struct vgic_irq *irq = &dist->spis[i];
+
+		irq->intid = i + VGIC_NR_PRIVATE_IRQS;
+		INIT_LIST_HEAD(&irq->ap_list);
+		raw_spin_lock_init(&irq->irq_lock);
+		irq->vcpu = NULL;
+		irq->target_vcpu = vcpu0;
+		kref_init(&irq->refcount);
+		switch (dist->vgic_model) {
+		case KVM_DEV_TYPE_ARM_VGIC_V2:
+			irq->targets = 0;
+			irq->group = 0;
+			break;
+		case KVM_DEV_TYPE_ARM_VGIC_V3:
+			irq->mpidr = 0;
+			irq->group = 1;
+			break;
+		default:
+			kfree(dist->spis);
+			dist->spis = NULL;
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+/**
+ * kvm_vgic_vcpu_init() - Initialize static VGIC VCPU data
+ * structures and register VCPU-specific KVM iodevs
+ *
+ * @vcpu: pointer to the VCPU being created and initialized
+ *
+ * Only do initialization, but do not actually enable the
+ * VGIC CPU interface
+ */
+int kvm_vgic_vcpu_init(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	int ret = 0;
+	int i;
+
+	vgic_cpu->rd_iodev.base_addr = VGIC_ADDR_UNDEF;
+
+	INIT_LIST_HEAD(&vgic_cpu->ap_list_head);
+	raw_spin_lock_init(&vgic_cpu->ap_list_lock);
+	atomic_set(&vgic_cpu->vgic_v3.its_vpe.vlpi_count, 0);
+
+	/*
+	 * Enable and configure all SGIs to be edge-triggered and
+	 * configure all PPIs as level-triggered.
+	 */
+	for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) {
+		struct vgic_irq *irq = &vgic_cpu->private_irqs[i];
+
+		INIT_LIST_HEAD(&irq->ap_list);
+		raw_spin_lock_init(&irq->irq_lock);
+		irq->intid = i;
+		irq->vcpu = NULL;
+		irq->target_vcpu = vcpu;
+		kref_init(&irq->refcount);
+		if (vgic_irq_is_sgi(i)) {
+			/* SGIs */
+			irq->enabled = 1;
+			irq->config = VGIC_CONFIG_EDGE;
+		} else {
+			/* PPIs */
+			irq->config = VGIC_CONFIG_LEVEL;
+		}
+	}
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return 0;
+
+	/*
+	 * If we are creating a VCPU with a GICv3 we must also register the
+	 * KVM io device for the redistributor that belongs to this VCPU.
+	 */
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		mutex_lock(&vcpu->kvm->slots_lock);
+		ret = vgic_register_redist_iodev(vcpu);
+		mutex_unlock(&vcpu->kvm->slots_lock);
+	}
+	return ret;
+}
+
+static void kvm_vgic_vcpu_enable(struct kvm_vcpu *vcpu)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_enable(vcpu);
+	else
+		vgic_v3_enable(vcpu);
+}
+
+/*
+ * vgic_init: allocates and initializes dist and vcpu data structures
+ * depending on two dimensioning parameters:
+ * - the number of spis
+ * - the number of vcpus
+ * The function is generally called when nr_spis has been explicitly set
+ * by the guest through the KVM DEVICE API. If not nr_spis is set to 256.
+ * vgic_initialized() returns true when this function has succeeded.
+ */
+int vgic_init(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu;
+	int ret = 0, i;
+	unsigned long idx;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	if (vgic_initialized(kvm))
+		return 0;
+
+	/* Are we also in the middle of creating a VCPU? */
+	if (kvm->created_vcpus != atomic_read(&kvm->online_vcpus))
+		return -EBUSY;
+
+	/* freeze the number of spis */
+	if (!dist->nr_spis)
+		dist->nr_spis = VGIC_NR_IRQS_LEGACY - VGIC_NR_PRIVATE_IRQS;
+
+	ret = kvm_vgic_dist_init(kvm, dist->nr_spis);
+	if (ret)
+		goto out;
+
+	/* Initialize groups on CPUs created before the VGIC type was known */
+	kvm_for_each_vcpu(idx, vcpu, kvm) {
+		struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+
+		for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++) {
+			struct vgic_irq *irq = &vgic_cpu->private_irqs[i];
+			switch (dist->vgic_model) {
+			case KVM_DEV_TYPE_ARM_VGIC_V3:
+				irq->group = 1;
+				irq->mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
+				break;
+			case KVM_DEV_TYPE_ARM_VGIC_V2:
+				irq->group = 0;
+				irq->targets = 1U << idx;
+				break;
+			default:
+				ret = -EINVAL;
+				goto out;
+			}
+		}
+	}
+
+	if (vgic_has_its(kvm))
+		vgic_lpi_translation_cache_init(kvm);
+
+	/*
+	 * If we have GICv4.1 enabled, unconditionnaly request enable the
+	 * v4 support so that we get HW-accelerated vSGIs. Otherwise, only
+	 * enable it if we present a virtual ITS to the guest.
+	 */
+	if (vgic_supports_direct_msis(kvm)) {
+		ret = vgic_v4_init(kvm);
+		if (ret)
+			goto out;
+	}
+
+	kvm_for_each_vcpu(idx, vcpu, kvm)
+		kvm_vgic_vcpu_enable(vcpu);
+
+	ret = kvm_vgic_setup_default_irq_routing(kvm);
+	if (ret)
+		goto out;
+
+	vgic_debug_init(kvm);
+
+	/*
+	 * If userspace didn't set the GIC implementation revision,
+	 * default to the latest and greatest. You know want it.
+	 */
+	if (!dist->implementation_rev)
+		dist->implementation_rev = KVM_VGIC_IMP_REV_LATEST;
+	dist->initialized = true;
+
+out:
+	return ret;
+}
+
+static void kvm_vgic_dist_destroy(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_redist_region *rdreg, *next;
+
+	dist->ready = false;
+	dist->initialized = false;
+
+	kfree(dist->spis);
+	dist->spis = NULL;
+	dist->nr_spis = 0;
+	dist->vgic_dist_base = VGIC_ADDR_UNDEF;
+
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		list_for_each_entry_safe(rdreg, next, &dist->rd_regions, list)
+			vgic_v3_free_redist_region(rdreg);
+		INIT_LIST_HEAD(&dist->rd_regions);
+	} else {
+		dist->vgic_cpu_base = VGIC_ADDR_UNDEF;
+	}
+
+	if (vgic_has_its(kvm))
+		vgic_lpi_translation_cache_destroy(kvm);
+
+	if (vgic_supports_direct_msis(kvm))
+		vgic_v4_teardown(kvm);
+}
+
+static void __kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+
+	/*
+	 * Retire all pending LPIs on this vcpu anyway as we're
+	 * going to destroy it.
+	 */
+	vgic_flush_pending_lpis(vcpu);
+
+	INIT_LIST_HEAD(&vgic_cpu->ap_list_head);
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		vgic_unregister_redist_iodev(vcpu);
+		vgic_cpu->rd_iodev.base_addr = VGIC_ADDR_UNDEF;
+	}
+}
+
+void kvm_vgic_vcpu_destroy(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+
+	mutex_lock(&kvm->slots_lock);
+	__kvm_vgic_vcpu_destroy(vcpu);
+	mutex_unlock(&kvm->slots_lock);
+}
+
+void kvm_vgic_destroy(struct kvm *kvm)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	mutex_lock(&kvm->slots_lock);
+
+	vgic_debug_destroy(kvm);
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		__kvm_vgic_vcpu_destroy(vcpu);
+
+	mutex_lock(&kvm->arch.config_lock);
+
+	kvm_vgic_dist_destroy(kvm);
+
+	mutex_unlock(&kvm->arch.config_lock);
+	mutex_unlock(&kvm->slots_lock);
+}
+
+/**
+ * vgic_lazy_init: Lazy init is only allowed if the GIC exposed to the guest
+ * is a GICv2. A GICv3 must be explicitly initialized by userspace using the
+ * KVM_DEV_ARM_VGIC_GRP_CTRL KVM_DEVICE group.
+ * @kvm: kvm struct pointer
+ */
+int vgic_lazy_init(struct kvm *kvm)
+{
+	int ret = 0;
+
+	if (unlikely(!vgic_initialized(kvm))) {
+		/*
+		 * We only provide the automatic initialization of the VGIC
+		 * for the legacy case of a GICv2. Any other type must
+		 * be explicitly initialized once setup with the respective
+		 * KVM device call.
+		 */
+		if (kvm->arch.vgic.vgic_model != KVM_DEV_TYPE_ARM_VGIC_V2)
+			return -EBUSY;
+
+		mutex_lock(&kvm->arch.config_lock);
+		ret = vgic_init(kvm);
+		mutex_unlock(&kvm->arch.config_lock);
+	}
+
+	return ret;
+}
+
+/* RESOURCE MAPPING */
+
+/**
+ * Map the MMIO regions depending on the VGIC model exposed to the guest
+ * called on the first VCPU run.
+ * Also map the virtual CPU interface into the VM.
+ * v2 calls vgic_init() if not already done.
+ * v3 and derivatives return an error if the VGIC is not initialized.
+ * vgic_ready() returns true if this function has succeeded.
+ * @kvm: kvm struct pointer
+ */
+int kvm_vgic_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	enum vgic_type type;
+	gpa_t dist_base;
+	int ret = 0;
+
+	if (likely(vgic_ready(kvm)))
+		return 0;
+
+	mutex_lock(&kvm->slots_lock);
+	mutex_lock(&kvm->arch.config_lock);
+	if (vgic_ready(kvm))
+		goto out;
+
+	if (!irqchip_in_kernel(kvm))
+		goto out;
+
+	if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2) {
+		ret = vgic_v2_map_resources(kvm);
+		type = VGIC_V2;
+	} else {
+		ret = vgic_v3_map_resources(kvm);
+		type = VGIC_V3;
+	}
+
+	if (ret)
+		goto out;
+
+	dist->ready = true;
+	dist_base = dist->vgic_dist_base;
+	mutex_unlock(&kvm->arch.config_lock);
+
+	ret = vgic_register_dist_iodev(kvm, dist_base, type);
+	if (ret)
+		kvm_err("Unable to register VGIC dist MMIO regions\n");
+
+	goto out_slots;
+out:
+	mutex_unlock(&kvm->arch.config_lock);
+out_slots:
+	mutex_unlock(&kvm->slots_lock);
+
+	if (ret)
+		kvm_vgic_destroy(kvm);
+
+	return ret;
+}
+
+/* GENERIC PROBE */
+
+void kvm_vgic_cpu_up(void)
+{
+	enable_percpu_irq(kvm_vgic_global_state.maint_irq, 0);
+}
+
+
+void kvm_vgic_cpu_down(void)
+{
+	disable_percpu_irq(kvm_vgic_global_state.maint_irq);
+}
+
+static irqreturn_t vgic_maintenance_handler(int irq, void *data)
+{
+	/*
+	 * We cannot rely on the vgic maintenance interrupt to be
+	 * delivered synchronously. This means we can only use it to
+	 * exit the VM, and we perform the handling of EOIed
+	 * interrupts on the exit path (see vgic_fold_lr_state).
+	 */
+	return IRQ_HANDLED;
+}
+
+static struct gic_kvm_info *gic_kvm_info;
+
+void __init vgic_set_kvm_info(const struct gic_kvm_info *info)
+{
+	BUG_ON(gic_kvm_info != NULL);
+	gic_kvm_info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (gic_kvm_info)
+		*gic_kvm_info = *info;
+}
+
+/**
+ * kvm_vgic_init_cpu_hardware - initialize the GIC VE hardware
+ *
+ * For a specific CPU, initialize the GIC VE hardware.
+ */
+void kvm_vgic_init_cpu_hardware(void)
+{
+	BUG_ON(preemptible());
+
+	/*
+	 * We want to make sure the list registers start out clear so that we
+	 * only have the program the used registers.
+	 */
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_init_lrs();
+	else
+		kvm_call_hyp(__vgic_v3_init_lrs);
+}
+
+/**
+ * kvm_vgic_hyp_init: populates the kvm_vgic_global_state variable
+ * according to the host GIC model. Accordingly calls either
+ * vgic_v2/v3_probe which registers the KVM_DEVICE that can be
+ * instantiated by a guest later on .
+ */
+int kvm_vgic_hyp_init(void)
+{
+	bool has_mask;
+	int ret;
+
+	if (!gic_kvm_info)
+		return -ENODEV;
+
+	has_mask = !gic_kvm_info->no_maint_irq_mask;
+
+	if (has_mask && !gic_kvm_info->maint_irq) {
+		kvm_err("No vgic maintenance irq\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * If we get one of these oddball non-GICs, taint the kernel,
+	 * as we have no idea of how they *really* behave.
+	 */
+	if (gic_kvm_info->no_hw_deactivation) {
+		kvm_info("Non-architectural vgic, tainting kernel\n");
+		add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
+		kvm_vgic_global_state.no_hw_deactivation = true;
+	}
+
+	switch (gic_kvm_info->type) {
+	case GIC_V2:
+		ret = vgic_v2_probe(gic_kvm_info);
+		break;
+	case GIC_V3:
+		ret = vgic_v3_probe(gic_kvm_info);
+		if (!ret) {
+			static_branch_enable(&kvm_vgic_global_state.gicv3_cpuif);
+			kvm_info("GIC system register CPU interface enabled\n");
+		}
+		break;
+	default:
+		ret = -ENODEV;
+	}
+
+	kvm_vgic_global_state.maint_irq = gic_kvm_info->maint_irq;
+
+	kfree(gic_kvm_info);
+	gic_kvm_info = NULL;
+
+	if (ret)
+		return ret;
+
+	if (!has_mask && !kvm_vgic_global_state.maint_irq)
+		return 0;
+
+	ret = request_percpu_irq(kvm_vgic_global_state.maint_irq,
+				 vgic_maintenance_handler,
+				 "vgic", kvm_get_running_vcpus());
+	if (ret) {
+		kvm_err("Cannot register interrupt %d\n",
+			kvm_vgic_global_state.maint_irq);
+		return ret;
+	}
+
+	kvm_info("vgic interrupt IRQ%d\n", kvm_vgic_global_state.maint_irq);
+	return 0;
+}
diff --git a/arch/arm64/kvm/vgic/vgic-irqfd.c b/arch/arm64/kvm/vgic/vgic-irqfd.c
new file mode 100644
index 000000000..475059bac
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-irqfd.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ */
+
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <trace/events/kvm.h>
+#include <kvm/arm_vgic.h>
+#include "vgic.h"
+
+/**
+ * vgic_irqfd_set_irq: inject the IRQ corresponding to the
+ * irqchip routing entry
+ *
+ * This is the entry point for irqfd IRQ injection
+ */
+static int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e,
+			struct kvm *kvm, int irq_source_id,
+			int level, bool line_status)
+{
+	unsigned int spi_id = e->irqchip.pin + VGIC_NR_PRIVATE_IRQS;
+
+	if (!vgic_valid_spi(kvm, spi_id))
+		return -EINVAL;
+	return kvm_vgic_inject_irq(kvm, 0, spi_id, level, NULL);
+}
+
+/**
+ * kvm_set_routing_entry: populate a kvm routing entry
+ * from a user routing entry
+ *
+ * @kvm: the VM this entry is applied to
+ * @e: kvm kernel routing entry handle
+ * @ue: user api routing entry handle
+ * return 0 on success, -EINVAL on errors.
+ */
+int kvm_set_routing_entry(struct kvm *kvm,
+			  struct kvm_kernel_irq_routing_entry *e,
+			  const struct kvm_irq_routing_entry *ue)
+{
+	int r = -EINVAL;
+
+	switch (ue->type) {
+	case KVM_IRQ_ROUTING_IRQCHIP:
+		e->set = vgic_irqfd_set_irq;
+		e->irqchip.irqchip = ue->u.irqchip.irqchip;
+		e->irqchip.pin = ue->u.irqchip.pin;
+		if ((e->irqchip.pin >= KVM_IRQCHIP_NUM_PINS) ||
+		    (e->irqchip.irqchip >= KVM_NR_IRQCHIPS))
+			goto out;
+		break;
+	case KVM_IRQ_ROUTING_MSI:
+		e->set = kvm_set_msi;
+		e->msi.address_lo = ue->u.msi.address_lo;
+		e->msi.address_hi = ue->u.msi.address_hi;
+		e->msi.data = ue->u.msi.data;
+		e->msi.flags = ue->flags;
+		e->msi.devid = ue->u.msi.devid;
+		break;
+	default:
+		goto out;
+	}
+	r = 0;
+out:
+	return r;
+}
+
+static void kvm_populate_msi(struct kvm_kernel_irq_routing_entry *e,
+			     struct kvm_msi *msi)
+{
+	msi->address_lo = e->msi.address_lo;
+	msi->address_hi = e->msi.address_hi;
+	msi->data = e->msi.data;
+	msi->flags = e->msi.flags;
+	msi->devid = e->msi.devid;
+}
+/**
+ * kvm_set_msi: inject the MSI corresponding to the
+ * MSI routing entry
+ *
+ * This is the entry point for irqfd MSI injection
+ * and userspace MSI injection.
+ */
+int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
+		struct kvm *kvm, int irq_source_id,
+		int level, bool line_status)
+{
+	struct kvm_msi msi;
+
+	if (!vgic_has_its(kvm))
+		return -ENODEV;
+
+	if (!level)
+		return -1;
+
+	kvm_populate_msi(e, &msi);
+	return vgic_its_inject_msi(kvm, &msi);
+}
+
+/**
+ * kvm_arch_set_irq_inatomic: fast-path for irqfd injection
+ */
+int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e,
+			      struct kvm *kvm, int irq_source_id, int level,
+			      bool line_status)
+{
+	if (!level)
+		return -EWOULDBLOCK;
+
+	switch (e->type) {
+	case KVM_IRQ_ROUTING_MSI: {
+		struct kvm_msi msi;
+
+		if (!vgic_has_its(kvm))
+			break;
+
+		kvm_populate_msi(e, &msi);
+		return vgic_its_inject_cached_translation(kvm, &msi);
+	}
+
+	case KVM_IRQ_ROUTING_IRQCHIP:
+		/*
+		 * Injecting SPIs is always possible in atomic context
+		 * as long as the damn vgic is initialized.
+		 */
+		if (unlikely(!vgic_initialized(kvm)))
+			break;
+		return vgic_irqfd_set_irq(e, kvm, irq_source_id, 1, line_status);
+	}
+
+	return -EWOULDBLOCK;
+}
+
+int kvm_vgic_setup_default_irq_routing(struct kvm *kvm)
+{
+	struct kvm_irq_routing_entry *entries;
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	u32 nr = dist->nr_spis;
+	int i, ret;
+
+	entries = kcalloc(nr, sizeof(*entries), GFP_KERNEL_ACCOUNT);
+	if (!entries)
+		return -ENOMEM;
+
+	for (i = 0; i < nr; i++) {
+		entries[i].gsi = i;
+		entries[i].type = KVM_IRQ_ROUTING_IRQCHIP;
+		entries[i].u.irqchip.irqchip = 0;
+		entries[i].u.irqchip.pin = i;
+	}
+	ret = kvm_set_irq_routing(kvm, entries, nr, 0);
+	kfree(entries);
+	return ret;
+}
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
new file mode 100644
index 000000000..c42072354
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -0,0 +1,2908 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GICv3 ITS emulation
+ *
+ * Copyright (C) 2015,2016 ARM Ltd.
+ * Author: Andre Przywara <andre.przywara@arm.com>
+ */
+
+#include <linux/cpu.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/uaccess.h>
+#include <linux/list_sort.h>
+
+#include <linux/irqchip/arm-gic-v3.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_mmu.h>
+
+#include "vgic.h"
+#include "vgic-mmio.h"
+
+static int vgic_its_save_tables_v0(struct vgic_its *its);
+static int vgic_its_restore_tables_v0(struct vgic_its *its);
+static int vgic_its_commit_v0(struct vgic_its *its);
+static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
+			     struct kvm_vcpu *filter_vcpu, bool needs_inv);
+
+/*
+ * Creates a new (reference to a) struct vgic_irq for a given LPI.
+ * If this LPI is already mapped on another ITS, we increase its refcount
+ * and return a pointer to the existing structure.
+ * If this is a "new" LPI, we allocate and initialize a new struct vgic_irq.
+ * This function returns a pointer to the _unlocked_ structure.
+ */
+static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
+				     struct kvm_vcpu *vcpu)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_irq *irq = vgic_get_irq(kvm, NULL, intid), *oldirq;
+	unsigned long flags;
+	int ret;
+
+	/* In this case there is no put, since we keep the reference. */
+	if (irq)
+		return irq;
+
+	irq = kzalloc(sizeof(struct vgic_irq), GFP_KERNEL_ACCOUNT);
+	if (!irq)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&irq->lpi_list);
+	INIT_LIST_HEAD(&irq->ap_list);
+	raw_spin_lock_init(&irq->irq_lock);
+
+	irq->config = VGIC_CONFIG_EDGE;
+	kref_init(&irq->refcount);
+	irq->intid = intid;
+	irq->target_vcpu = vcpu;
+	irq->group = 1;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
+	/*
+	 * There could be a race with another vgic_add_lpi(), so we need to
+	 * check that we don't add a second list entry with the same LPI.
+	 */
+	list_for_each_entry(oldirq, &dist->lpi_list_head, lpi_list) {
+		if (oldirq->intid != intid)
+			continue;
+
+		/* Someone was faster with adding this LPI, lets use that. */
+		kfree(irq);
+		irq = oldirq;
+
+		/*
+		 * This increases the refcount, the caller is expected to
+		 * call vgic_put_irq() on the returned pointer once it's
+		 * finished with the IRQ.
+		 */
+		vgic_get_irq_kref(irq);
+
+		goto out_unlock;
+	}
+
+	list_add_tail(&irq->lpi_list, &dist->lpi_list_head);
+	dist->lpi_list_count++;
+
+out_unlock:
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+
+	/*
+	 * We "cache" the configuration table entries in our struct vgic_irq's.
+	 * However we only have those structs for mapped IRQs, so we read in
+	 * the respective config data from memory here upon mapping the LPI.
+	 *
+	 * Should any of these fail, behave as if we couldn't create the LPI
+	 * by dropping the refcount and returning the error.
+	 */
+	ret = update_lpi_config(kvm, irq, NULL, false);
+	if (ret) {
+		vgic_put_irq(kvm, irq);
+		return ERR_PTR(ret);
+	}
+
+	ret = vgic_v3_lpi_sync_pending_status(kvm, irq);
+	if (ret) {
+		vgic_put_irq(kvm, irq);
+		return ERR_PTR(ret);
+	}
+
+	return irq;
+}
+
+struct its_device {
+	struct list_head dev_list;
+
+	/* the head for the list of ITTEs */
+	struct list_head itt_head;
+	u32 num_eventid_bits;
+	gpa_t itt_addr;
+	u32 device_id;
+};
+
+#define COLLECTION_NOT_MAPPED ((u32)~0)
+
+struct its_collection {
+	struct list_head coll_list;
+
+	u32 collection_id;
+	u32 target_addr;
+};
+
+#define its_is_collection_mapped(coll) ((coll) && \
+				((coll)->target_addr != COLLECTION_NOT_MAPPED))
+
+struct its_ite {
+	struct list_head ite_list;
+
+	struct vgic_irq *irq;
+	struct its_collection *collection;
+	u32 event_id;
+};
+
+struct vgic_translation_cache_entry {
+	struct list_head	entry;
+	phys_addr_t		db;
+	u32			devid;
+	u32			eventid;
+	struct vgic_irq		*irq;
+};
+
+/**
+ * struct vgic_its_abi - ITS abi ops and settings
+ * @cte_esz: collection table entry size
+ * @dte_esz: device table entry size
+ * @ite_esz: interrupt translation table entry size
+ * @save tables: save the ITS tables into guest RAM
+ * @restore_tables: restore the ITS internal structs from tables
+ *  stored in guest RAM
+ * @commit: initialize the registers which expose the ABI settings,
+ *  especially the entry sizes
+ */
+struct vgic_its_abi {
+	int cte_esz;
+	int dte_esz;
+	int ite_esz;
+	int (*save_tables)(struct vgic_its *its);
+	int (*restore_tables)(struct vgic_its *its);
+	int (*commit)(struct vgic_its *its);
+};
+
+#define ABI_0_ESZ	8
+#define ESZ_MAX		ABI_0_ESZ
+
+static const struct vgic_its_abi its_table_abi_versions[] = {
+	[0] = {
+	 .cte_esz = ABI_0_ESZ,
+	 .dte_esz = ABI_0_ESZ,
+	 .ite_esz = ABI_0_ESZ,
+	 .save_tables = vgic_its_save_tables_v0,
+	 .restore_tables = vgic_its_restore_tables_v0,
+	 .commit = vgic_its_commit_v0,
+	},
+};
+
+#define NR_ITS_ABIS	ARRAY_SIZE(its_table_abi_versions)
+
+inline const struct vgic_its_abi *vgic_its_get_abi(struct vgic_its *its)
+{
+	return &its_table_abi_versions[its->abi_rev];
+}
+
+static int vgic_its_set_abi(struct vgic_its *its, u32 rev)
+{
+	const struct vgic_its_abi *abi;
+
+	its->abi_rev = rev;
+	abi = vgic_its_get_abi(its);
+	return abi->commit(its);
+}
+
+/*
+ * Find and returns a device in the device table for an ITS.
+ * Must be called with the its_lock mutex held.
+ */
+static struct its_device *find_its_device(struct vgic_its *its, u32 device_id)
+{
+	struct its_device *device;
+
+	list_for_each_entry(device, &its->device_list, dev_list)
+		if (device_id == device->device_id)
+			return device;
+
+	return NULL;
+}
+
+/*
+ * Find and returns an interrupt translation table entry (ITTE) for a given
+ * Device ID/Event ID pair on an ITS.
+ * Must be called with the its_lock mutex held.
+ */
+static struct its_ite *find_ite(struct vgic_its *its, u32 device_id,
+				  u32 event_id)
+{
+	struct its_device *device;
+	struct its_ite *ite;
+
+	device = find_its_device(its, device_id);
+	if (device == NULL)
+		return NULL;
+
+	list_for_each_entry(ite, &device->itt_head, ite_list)
+		if (ite->event_id == event_id)
+			return ite;
+
+	return NULL;
+}
+
+/* To be used as an iterator this macro misses the enclosing parentheses */
+#define for_each_lpi_its(dev, ite, its) \
+	list_for_each_entry(dev, &(its)->device_list, dev_list) \
+		list_for_each_entry(ite, &(dev)->itt_head, ite_list)
+
+#define GIC_LPI_OFFSET 8192
+
+#define VITS_TYPER_IDBITS 16
+#define VITS_TYPER_DEVBITS 16
+#define VITS_DTE_MAX_DEVID_OFFSET	(BIT(14) - 1)
+#define VITS_ITE_MAX_EVENTID_OFFSET	(BIT(16) - 1)
+
+/*
+ * Finds and returns a collection in the ITS collection table.
+ * Must be called with the its_lock mutex held.
+ */
+static struct its_collection *find_collection(struct vgic_its *its, int coll_id)
+{
+	struct its_collection *collection;
+
+	list_for_each_entry(collection, &its->collection_list, coll_list) {
+		if (coll_id == collection->collection_id)
+			return collection;
+	}
+
+	return NULL;
+}
+
+#define LPI_PROP_ENABLE_BIT(p)	((p) & LPI_PROP_ENABLED)
+#define LPI_PROP_PRIORITY(p)	((p) & 0xfc)
+
+/*
+ * Reads the configuration data for a given LPI from guest memory and
+ * updates the fields in struct vgic_irq.
+ * If filter_vcpu is not NULL, applies only if the IRQ is targeting this
+ * VCPU. Unconditionally applies if filter_vcpu is NULL.
+ */
+static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
+			     struct kvm_vcpu *filter_vcpu, bool needs_inv)
+{
+	u64 propbase = GICR_PROPBASER_ADDRESS(kvm->arch.vgic.propbaser);
+	u8 prop;
+	int ret;
+	unsigned long flags;
+
+	ret = kvm_read_guest_lock(kvm, propbase + irq->intid - GIC_LPI_OFFSET,
+				  &prop, 1);
+
+	if (ret)
+		return ret;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+	if (!filter_vcpu || filter_vcpu == irq->target_vcpu) {
+		irq->priority = LPI_PROP_PRIORITY(prop);
+		irq->enabled = LPI_PROP_ENABLE_BIT(prop);
+
+		if (!irq->hw) {
+			vgic_queue_irq_unlock(kvm, irq, flags);
+			return 0;
+		}
+	}
+
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+	if (irq->hw)
+		return its_prop_update_vlpi(irq->host_irq, prop, needs_inv);
+
+	return 0;
+}
+
+/*
+ * Create a snapshot of the current LPIs targeting @vcpu, so that we can
+ * enumerate those LPIs without holding any lock.
+ * Returns their number and puts the kmalloc'ed array into intid_ptr.
+ */
+int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_irq *irq;
+	unsigned long flags;
+	u32 *intids;
+	int irq_count, i = 0;
+
+	/*
+	 * There is an obvious race between allocating the array and LPIs
+	 * being mapped/unmapped. If we ended up here as a result of a
+	 * command, we're safe (locks are held, preventing another
+	 * command). If coming from another path (such as enabling LPIs),
+	 * we must be careful not to overrun the array.
+	 */
+	irq_count = READ_ONCE(dist->lpi_list_count);
+	intids = kmalloc_array(irq_count, sizeof(intids[0]), GFP_KERNEL_ACCOUNT);
+	if (!intids)
+		return -ENOMEM;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+	list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
+		if (i == irq_count)
+			break;
+		/* We don't need to "get" the IRQ, as we hold the list lock. */
+		if (vcpu && irq->target_vcpu != vcpu)
+			continue;
+		intids[i++] = irq->intid;
+	}
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+
+	*intid_ptr = intids;
+	return i;
+}
+
+static int update_affinity(struct vgic_irq *irq, struct kvm_vcpu *vcpu)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	irq->target_vcpu = vcpu;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+	if (irq->hw) {
+		struct its_vlpi_map map;
+
+		ret = its_get_vlpi(irq->host_irq, &map);
+		if (ret)
+			return ret;
+
+		if (map.vpe)
+			atomic_dec(&map.vpe->vlpi_count);
+		map.vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+		atomic_inc(&map.vpe->vlpi_count);
+
+		ret = its_map_vlpi(irq->host_irq, &map);
+	}
+
+	return ret;
+}
+
+/*
+ * Promotes the ITS view of affinity of an ITTE (which redistributor this LPI
+ * is targeting) to the VGIC's view, which deals with target VCPUs.
+ * Needs to be called whenever either the collection for a LPIs has
+ * changed or the collection itself got retargeted.
+ */
+static void update_affinity_ite(struct kvm *kvm, struct its_ite *ite)
+{
+	struct kvm_vcpu *vcpu;
+
+	if (!its_is_collection_mapped(ite->collection))
+		return;
+
+	vcpu = kvm_get_vcpu(kvm, ite->collection->target_addr);
+	update_affinity(ite->irq, vcpu);
+}
+
+/*
+ * Updates the target VCPU for every LPI targeting this collection.
+ * Must be called with the its_lock mutex held.
+ */
+static void update_affinity_collection(struct kvm *kvm, struct vgic_its *its,
+				       struct its_collection *coll)
+{
+	struct its_device *device;
+	struct its_ite *ite;
+
+	for_each_lpi_its(device, ite, its) {
+		if (ite->collection != coll)
+			continue;
+
+		update_affinity_ite(kvm, ite);
+	}
+}
+
+static u32 max_lpis_propbaser(u64 propbaser)
+{
+	int nr_idbits = (propbaser & 0x1f) + 1;
+
+	return 1U << min(nr_idbits, INTERRUPT_ID_BITS_ITS);
+}
+
+/*
+ * Sync the pending table pending bit of LPIs targeting @vcpu
+ * with our own data structures. This relies on the LPI being
+ * mapped before.
+ */
+static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
+{
+	gpa_t pendbase = GICR_PENDBASER_ADDRESS(vcpu->arch.vgic_cpu.pendbaser);
+	struct vgic_irq *irq;
+	int last_byte_offset = -1;
+	int ret = 0;
+	u32 *intids;
+	int nr_irqs, i;
+	unsigned long flags;
+	u8 pendmask;
+
+	nr_irqs = vgic_copy_lpi_list(vcpu->kvm, vcpu, &intids);
+	if (nr_irqs < 0)
+		return nr_irqs;
+
+	for (i = 0; i < nr_irqs; i++) {
+		int byte_offset, bit_nr;
+
+		byte_offset = intids[i] / BITS_PER_BYTE;
+		bit_nr = intids[i] % BITS_PER_BYTE;
+
+		/*
+		 * For contiguously allocated LPIs chances are we just read
+		 * this very same byte in the last iteration. Reuse that.
+		 */
+		if (byte_offset != last_byte_offset) {
+			ret = kvm_read_guest_lock(vcpu->kvm,
+						  pendbase + byte_offset,
+						  &pendmask, 1);
+			if (ret) {
+				kfree(intids);
+				return ret;
+			}
+			last_byte_offset = byte_offset;
+		}
+
+		irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]);
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->pending_latch = pendmask & (1U << bit_nr);
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	kfree(intids);
+
+	return ret;
+}
+
+static unsigned long vgic_mmio_read_its_typer(struct kvm *kvm,
+					      struct vgic_its *its,
+					      gpa_t addr, unsigned int len)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	u64 reg = GITS_TYPER_PLPIS;
+
+	/*
+	 * We use linear CPU numbers for redistributor addressing,
+	 * so GITS_TYPER.PTA is 0.
+	 * Also we force all PROPBASER registers to be the same, so
+	 * CommonLPIAff is 0 as well.
+	 * To avoid memory waste in the guest, we keep the number of IDBits and
+	 * DevBits low - as least for the time being.
+	 */
+	reg |= GIC_ENCODE_SZ(VITS_TYPER_DEVBITS, 5) << GITS_TYPER_DEVBITS_SHIFT;
+	reg |= GIC_ENCODE_SZ(VITS_TYPER_IDBITS, 5) << GITS_TYPER_IDBITS_SHIFT;
+	reg |= GIC_ENCODE_SZ(abi->ite_esz, 4) << GITS_TYPER_ITT_ENTRY_SIZE_SHIFT;
+
+	return extract_bytes(reg, addr & 7, len);
+}
+
+static unsigned long vgic_mmio_read_its_iidr(struct kvm *kvm,
+					     struct vgic_its *its,
+					     gpa_t addr, unsigned int len)
+{
+	u32 val;
+
+	val = (its->abi_rev << GITS_IIDR_REV_SHIFT) & GITS_IIDR_REV_MASK;
+	val |= (PRODUCT_ID_KVM << GITS_IIDR_PRODUCTID_SHIFT) | IMPLEMENTER_ARM;
+	return val;
+}
+
+static int vgic_mmio_uaccess_write_its_iidr(struct kvm *kvm,
+					    struct vgic_its *its,
+					    gpa_t addr, unsigned int len,
+					    unsigned long val)
+{
+	u32 rev = GITS_IIDR_REV(val);
+
+	if (rev >= NR_ITS_ABIS)
+		return -EINVAL;
+	return vgic_its_set_abi(its, rev);
+}
+
+static unsigned long vgic_mmio_read_its_idregs(struct kvm *kvm,
+					       struct vgic_its *its,
+					       gpa_t addr, unsigned int len)
+{
+	switch (addr & 0xffff) {
+	case GITS_PIDR0:
+		return 0x92;	/* part number, bits[7:0] */
+	case GITS_PIDR1:
+		return 0xb4;	/* part number, bits[11:8] */
+	case GITS_PIDR2:
+		return GIC_PIDR2_ARCH_GICv3 | 0x0b;
+	case GITS_PIDR4:
+		return 0x40;	/* This is a 64K software visible page */
+	/* The following are the ID registers for (any) GIC. */
+	case GITS_CIDR0:
+		return 0x0d;
+	case GITS_CIDR1:
+		return 0xf0;
+	case GITS_CIDR2:
+		return 0x05;
+	case GITS_CIDR3:
+		return 0xb1;
+	}
+
+	return 0;
+}
+
+static struct vgic_irq *__vgic_its_check_cache(struct vgic_dist *dist,
+					       phys_addr_t db,
+					       u32 devid, u32 eventid)
+{
+	struct vgic_translation_cache_entry *cte;
+
+	list_for_each_entry(cte, &dist->lpi_translation_cache, entry) {
+		/*
+		 * If we hit a NULL entry, there is nothing after this
+		 * point.
+		 */
+		if (!cte->irq)
+			break;
+
+		if (cte->db != db || cte->devid != devid ||
+		    cte->eventid != eventid)
+			continue;
+
+		/*
+		 * Move this entry to the head, as it is the most
+		 * recently used.
+		 */
+		if (!list_is_first(&cte->entry, &dist->lpi_translation_cache))
+			list_move(&cte->entry, &dist->lpi_translation_cache);
+
+		return cte->irq;
+	}
+
+	return NULL;
+}
+
+static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db,
+					     u32 devid, u32 eventid)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_irq *irq;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
+	irq = __vgic_its_check_cache(dist, db, devid, eventid);
+	if (irq)
+		vgic_get_irq_kref(irq);
+
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+
+	return irq;
+}
+
+static void vgic_its_cache_translation(struct kvm *kvm, struct vgic_its *its,
+				       u32 devid, u32 eventid,
+				       struct vgic_irq *irq)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_translation_cache_entry *cte;
+	unsigned long flags;
+	phys_addr_t db;
+
+	/* Do not cache a directly injected interrupt */
+	if (irq->hw)
+		return;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
+	if (unlikely(list_empty(&dist->lpi_translation_cache)))
+		goto out;
+
+	/*
+	 * We could have raced with another CPU caching the same
+	 * translation behind our back, so let's check it is not in
+	 * already
+	 */
+	db = its->vgic_its_base + GITS_TRANSLATER;
+	if (__vgic_its_check_cache(dist, db, devid, eventid))
+		goto out;
+
+	/* Always reuse the last entry (LRU policy) */
+	cte = list_last_entry(&dist->lpi_translation_cache,
+			      typeof(*cte), entry);
+
+	/*
+	 * Caching the translation implies having an extra reference
+	 * to the interrupt, so drop the potential reference on what
+	 * was in the cache, and increment it on the new interrupt.
+	 */
+	if (cte->irq)
+		__vgic_put_lpi_locked(kvm, cte->irq);
+
+	vgic_get_irq_kref(irq);
+
+	cte->db		= db;
+	cte->devid	= devid;
+	cte->eventid	= eventid;
+	cte->irq	= irq;
+
+	/* Move the new translation to the head of the list */
+	list_move(&cte->entry, &dist->lpi_translation_cache);
+
+out:
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+}
+
+void vgic_its_invalidate_cache(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_translation_cache_entry *cte;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
+	list_for_each_entry(cte, &dist->lpi_translation_cache, entry) {
+		/*
+		 * If we hit a NULL entry, there is nothing after this
+		 * point.
+		 */
+		if (!cte->irq)
+			break;
+
+		__vgic_put_lpi_locked(kvm, cte->irq);
+		cte->irq = NULL;
+	}
+
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+}
+
+int vgic_its_resolve_lpi(struct kvm *kvm, struct vgic_its *its,
+			 u32 devid, u32 eventid, struct vgic_irq **irq)
+{
+	struct kvm_vcpu *vcpu;
+	struct its_ite *ite;
+
+	if (!its->enabled)
+		return -EBUSY;
+
+	ite = find_ite(its, devid, eventid);
+	if (!ite || !its_is_collection_mapped(ite->collection))
+		return E_ITS_INT_UNMAPPED_INTERRUPT;
+
+	vcpu = kvm_get_vcpu(kvm, ite->collection->target_addr);
+	if (!vcpu)
+		return E_ITS_INT_UNMAPPED_INTERRUPT;
+
+	if (!vgic_lpis_enabled(vcpu))
+		return -EBUSY;
+
+	vgic_its_cache_translation(kvm, its, devid, eventid, ite->irq);
+
+	*irq = ite->irq;
+	return 0;
+}
+
+struct vgic_its *vgic_msi_to_its(struct kvm *kvm, struct kvm_msi *msi)
+{
+	u64 address;
+	struct kvm_io_device *kvm_io_dev;
+	struct vgic_io_device *iodev;
+
+	if (!vgic_has_its(kvm))
+		return ERR_PTR(-ENODEV);
+
+	if (!(msi->flags & KVM_MSI_VALID_DEVID))
+		return ERR_PTR(-EINVAL);
+
+	address = (u64)msi->address_hi << 32 | msi->address_lo;
+
+	kvm_io_dev = kvm_io_bus_get_dev(kvm, KVM_MMIO_BUS, address);
+	if (!kvm_io_dev)
+		return ERR_PTR(-EINVAL);
+
+	if (kvm_io_dev->ops != &kvm_io_gic_ops)
+		return ERR_PTR(-EINVAL);
+
+	iodev = container_of(kvm_io_dev, struct vgic_io_device, dev);
+	if (iodev->iodev_type != IODEV_ITS)
+		return ERR_PTR(-EINVAL);
+
+	return iodev->its;
+}
+
+/*
+ * Find the target VCPU and the LPI number for a given devid/eventid pair
+ * and make this IRQ pending, possibly injecting it.
+ * Must be called with the its_lock mutex held.
+ * Returns 0 on success, a positive error value for any ITS mapping
+ * related errors and negative error values for generic errors.
+ */
+static int vgic_its_trigger_msi(struct kvm *kvm, struct vgic_its *its,
+				u32 devid, u32 eventid)
+{
+	struct vgic_irq *irq = NULL;
+	unsigned long flags;
+	int err;
+
+	err = vgic_its_resolve_lpi(kvm, its, devid, eventid, &irq);
+	if (err)
+		return err;
+
+	if (irq->hw)
+		return irq_set_irqchip_state(irq->host_irq,
+					     IRQCHIP_STATE_PENDING, true);
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	irq->pending_latch = true;
+	vgic_queue_irq_unlock(kvm, irq, flags);
+
+	return 0;
+}
+
+int vgic_its_inject_cached_translation(struct kvm *kvm, struct kvm_msi *msi)
+{
+	struct vgic_irq *irq;
+	unsigned long flags;
+	phys_addr_t db;
+
+	db = (u64)msi->address_hi << 32 | msi->address_lo;
+	irq = vgic_its_check_cache(kvm, db, msi->devid, msi->data);
+	if (!irq)
+		return -EWOULDBLOCK;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	irq->pending_latch = true;
+	vgic_queue_irq_unlock(kvm, irq, flags);
+	vgic_put_irq(kvm, irq);
+
+	return 0;
+}
+
+/*
+ * Queries the KVM IO bus framework to get the ITS pointer from the given
+ * doorbell address.
+ * We then call vgic_its_trigger_msi() with the decoded data.
+ * According to the KVM_SIGNAL_MSI API description returns 1 on success.
+ */
+int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi)
+{
+	struct vgic_its *its;
+	int ret;
+
+	if (!vgic_its_inject_cached_translation(kvm, msi))
+		return 1;
+
+	its = vgic_msi_to_its(kvm, msi);
+	if (IS_ERR(its))
+		return PTR_ERR(its);
+
+	mutex_lock(&its->its_lock);
+	ret = vgic_its_trigger_msi(kvm, its, msi->devid, msi->data);
+	mutex_unlock(&its->its_lock);
+
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * KVM_SIGNAL_MSI demands a return value > 0 for success and 0
+	 * if the guest has blocked the MSI. So we map any LPI mapping
+	 * related error to that.
+	 */
+	if (ret)
+		return 0;
+	else
+		return 1;
+}
+
+/* Requires the its_lock to be held. */
+static void its_free_ite(struct kvm *kvm, struct its_ite *ite)
+{
+	list_del(&ite->ite_list);
+
+	/* This put matches the get in vgic_add_lpi. */
+	if (ite->irq) {
+		if (ite->irq->hw)
+			WARN_ON(its_unmap_vlpi(ite->irq->host_irq));
+
+		vgic_put_irq(kvm, ite->irq);
+	}
+
+	kfree(ite);
+}
+
+static u64 its_cmd_mask_field(u64 *its_cmd, int word, int shift, int size)
+{
+	return (le64_to_cpu(its_cmd[word]) >> shift) & (BIT_ULL(size) - 1);
+}
+
+#define its_cmd_get_command(cmd)	its_cmd_mask_field(cmd, 0,  0,  8)
+#define its_cmd_get_deviceid(cmd)	its_cmd_mask_field(cmd, 0, 32, 32)
+#define its_cmd_get_size(cmd)		(its_cmd_mask_field(cmd, 1,  0,  5) + 1)
+#define its_cmd_get_id(cmd)		its_cmd_mask_field(cmd, 1,  0, 32)
+#define its_cmd_get_physical_id(cmd)	its_cmd_mask_field(cmd, 1, 32, 32)
+#define its_cmd_get_collection(cmd)	its_cmd_mask_field(cmd, 2,  0, 16)
+#define its_cmd_get_ittaddr(cmd)	(its_cmd_mask_field(cmd, 2,  8, 44) << 8)
+#define its_cmd_get_target_addr(cmd)	its_cmd_mask_field(cmd, 2, 16, 32)
+#define its_cmd_get_validbit(cmd)	its_cmd_mask_field(cmd, 2, 63,  1)
+
+/*
+ * The DISCARD command frees an Interrupt Translation Table Entry (ITTE).
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_discard(struct kvm *kvm, struct vgic_its *its,
+				       u64 *its_cmd)
+{
+	u32 device_id = its_cmd_get_deviceid(its_cmd);
+	u32 event_id = its_cmd_get_id(its_cmd);
+	struct its_ite *ite;
+
+	ite = find_ite(its, device_id, event_id);
+	if (ite && its_is_collection_mapped(ite->collection)) {
+		/*
+		 * Though the spec talks about removing the pending state, we
+		 * don't bother here since we clear the ITTE anyway and the
+		 * pending state is a property of the ITTE struct.
+		 */
+		vgic_its_invalidate_cache(kvm);
+
+		its_free_ite(kvm, ite);
+		return 0;
+	}
+
+	return E_ITS_DISCARD_UNMAPPED_INTERRUPT;
+}
+
+/*
+ * The MOVI command moves an ITTE to a different collection.
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_movi(struct kvm *kvm, struct vgic_its *its,
+				    u64 *its_cmd)
+{
+	u32 device_id = its_cmd_get_deviceid(its_cmd);
+	u32 event_id = its_cmd_get_id(its_cmd);
+	u32 coll_id = its_cmd_get_collection(its_cmd);
+	struct kvm_vcpu *vcpu;
+	struct its_ite *ite;
+	struct its_collection *collection;
+
+	ite = find_ite(its, device_id, event_id);
+	if (!ite)
+		return E_ITS_MOVI_UNMAPPED_INTERRUPT;
+
+	if (!its_is_collection_mapped(ite->collection))
+		return E_ITS_MOVI_UNMAPPED_COLLECTION;
+
+	collection = find_collection(its, coll_id);
+	if (!its_is_collection_mapped(collection))
+		return E_ITS_MOVI_UNMAPPED_COLLECTION;
+
+	ite->collection = collection;
+	vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+
+	vgic_its_invalidate_cache(kvm);
+
+	return update_affinity(ite->irq, vcpu);
+}
+
+static bool __is_visible_gfn_locked(struct vgic_its *its, gpa_t gpa)
+{
+	gfn_t gfn = gpa >> PAGE_SHIFT;
+	int idx;
+	bool ret;
+
+	idx = srcu_read_lock(&its->dev->kvm->srcu);
+	ret = kvm_is_visible_gfn(its->dev->kvm, gfn);
+	srcu_read_unlock(&its->dev->kvm->srcu, idx);
+	return ret;
+}
+
+/*
+ * Check whether an ID can be stored into the corresponding guest table.
+ * For a direct table this is pretty easy, but gets a bit nasty for
+ * indirect tables. We check whether the resulting guest physical address
+ * is actually valid (covered by a memslot and guest accessible).
+ * For this we have to read the respective first level entry.
+ */
+static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
+			      gpa_t *eaddr)
+{
+	int l1_tbl_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
+	u64 indirect_ptr, type = GITS_BASER_TYPE(baser);
+	phys_addr_t base = GITS_BASER_ADDR_48_to_52(baser);
+	int esz = GITS_BASER_ENTRY_SIZE(baser);
+	int index;
+
+	switch (type) {
+	case GITS_BASER_TYPE_DEVICE:
+		if (id >= BIT_ULL(VITS_TYPER_DEVBITS))
+			return false;
+		break;
+	case GITS_BASER_TYPE_COLLECTION:
+		/* as GITS_TYPER.CIL == 0, ITS supports 16-bit collection ID */
+		if (id >= BIT_ULL(16))
+			return false;
+		break;
+	default:
+		return false;
+	}
+
+	if (!(baser & GITS_BASER_INDIRECT)) {
+		phys_addr_t addr;
+
+		if (id >= (l1_tbl_size / esz))
+			return false;
+
+		addr = base + id * esz;
+
+		if (eaddr)
+			*eaddr = addr;
+
+		return __is_visible_gfn_locked(its, addr);
+	}
+
+	/* calculate and check the index into the 1st level */
+	index = id / (SZ_64K / esz);
+	if (index >= (l1_tbl_size / sizeof(u64)))
+		return false;
+
+	/* Each 1st level entry is represented by a 64-bit value. */
+	if (kvm_read_guest_lock(its->dev->kvm,
+			   base + index * sizeof(indirect_ptr),
+			   &indirect_ptr, sizeof(indirect_ptr)))
+		return false;
+
+	indirect_ptr = le64_to_cpu(indirect_ptr);
+
+	/* check the valid bit of the first level entry */
+	if (!(indirect_ptr & BIT_ULL(63)))
+		return false;
+
+	/* Mask the guest physical address and calculate the frame number. */
+	indirect_ptr &= GENMASK_ULL(51, 16);
+
+	/* Find the address of the actual entry */
+	index = id % (SZ_64K / esz);
+	indirect_ptr += index * esz;
+
+	if (eaddr)
+		*eaddr = indirect_ptr;
+
+	return __is_visible_gfn_locked(its, indirect_ptr);
+}
+
+/*
+ * Check whether an event ID can be stored in the corresponding Interrupt
+ * Translation Table, which starts at device->itt_addr.
+ */
+static bool vgic_its_check_event_id(struct vgic_its *its, struct its_device *device,
+		u32 event_id)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	int ite_esz = abi->ite_esz;
+	gpa_t gpa;
+
+	/* max table size is: BIT_ULL(device->num_eventid_bits) * ite_esz */
+	if (event_id >= BIT_ULL(device->num_eventid_bits))
+		return false;
+
+	gpa = device->itt_addr + event_id * ite_esz;
+	return __is_visible_gfn_locked(its, gpa);
+}
+
+/*
+ * Add a new collection into the ITS collection table.
+ * Returns 0 on success, and a negative error value for generic errors.
+ */
+static int vgic_its_alloc_collection(struct vgic_its *its,
+				     struct its_collection **colp,
+				     u32 coll_id)
+{
+	struct its_collection *collection;
+
+	collection = kzalloc(sizeof(*collection), GFP_KERNEL_ACCOUNT);
+	if (!collection)
+		return -ENOMEM;
+
+	collection->collection_id = coll_id;
+	collection->target_addr = COLLECTION_NOT_MAPPED;
+
+	list_add_tail(&collection->coll_list, &its->collection_list);
+	*colp = collection;
+
+	return 0;
+}
+
+static void vgic_its_free_collection(struct vgic_its *its, u32 coll_id)
+{
+	struct its_collection *collection;
+	struct its_device *device;
+	struct its_ite *ite;
+
+	/*
+	 * Clearing the mapping for that collection ID removes the
+	 * entry from the list. If there wasn't any before, we can
+	 * go home early.
+	 */
+	collection = find_collection(its, coll_id);
+	if (!collection)
+		return;
+
+	for_each_lpi_its(device, ite, its)
+		if (ite->collection &&
+		    ite->collection->collection_id == coll_id)
+			ite->collection = NULL;
+
+	list_del(&collection->coll_list);
+	kfree(collection);
+}
+
+/* Must be called with its_lock mutex held */
+static struct its_ite *vgic_its_alloc_ite(struct its_device *device,
+					  struct its_collection *collection,
+					  u32 event_id)
+{
+	struct its_ite *ite;
+
+	ite = kzalloc(sizeof(*ite), GFP_KERNEL_ACCOUNT);
+	if (!ite)
+		return ERR_PTR(-ENOMEM);
+
+	ite->event_id	= event_id;
+	ite->collection = collection;
+
+	list_add_tail(&ite->ite_list, &device->itt_head);
+	return ite;
+}
+
+/*
+ * The MAPTI and MAPI commands map LPIs to ITTEs.
+ * Must be called with its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its,
+				    u64 *its_cmd)
+{
+	u32 device_id = its_cmd_get_deviceid(its_cmd);
+	u32 event_id = its_cmd_get_id(its_cmd);
+	u32 coll_id = its_cmd_get_collection(its_cmd);
+	struct its_ite *ite;
+	struct kvm_vcpu *vcpu = NULL;
+	struct its_device *device;
+	struct its_collection *collection, *new_coll = NULL;
+	struct vgic_irq *irq;
+	int lpi_nr;
+
+	device = find_its_device(its, device_id);
+	if (!device)
+		return E_ITS_MAPTI_UNMAPPED_DEVICE;
+
+	if (!vgic_its_check_event_id(its, device, event_id))
+		return E_ITS_MAPTI_ID_OOR;
+
+	if (its_cmd_get_command(its_cmd) == GITS_CMD_MAPTI)
+		lpi_nr = its_cmd_get_physical_id(its_cmd);
+	else
+		lpi_nr = event_id;
+	if (lpi_nr < GIC_LPI_OFFSET ||
+	    lpi_nr >= max_lpis_propbaser(kvm->arch.vgic.propbaser))
+		return E_ITS_MAPTI_PHYSICALID_OOR;
+
+	/* If there is an existing mapping, behavior is UNPREDICTABLE. */
+	if (find_ite(its, device_id, event_id))
+		return 0;
+
+	collection = find_collection(its, coll_id);
+	if (!collection) {
+		int ret;
+
+		if (!vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL))
+			return E_ITS_MAPC_COLLECTION_OOR;
+
+		ret = vgic_its_alloc_collection(its, &collection, coll_id);
+		if (ret)
+			return ret;
+		new_coll = collection;
+	}
+
+	ite = vgic_its_alloc_ite(device, collection, event_id);
+	if (IS_ERR(ite)) {
+		if (new_coll)
+			vgic_its_free_collection(its, coll_id);
+		return PTR_ERR(ite);
+	}
+
+	if (its_is_collection_mapped(collection))
+		vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+
+	irq = vgic_add_lpi(kvm, lpi_nr, vcpu);
+	if (IS_ERR(irq)) {
+		if (new_coll)
+			vgic_its_free_collection(its, coll_id);
+		its_free_ite(kvm, ite);
+		return PTR_ERR(irq);
+	}
+	ite->irq = irq;
+
+	return 0;
+}
+
+/* Requires the its_lock to be held. */
+static void vgic_its_free_device(struct kvm *kvm, struct its_device *device)
+{
+	struct its_ite *ite, *temp;
+
+	/*
+	 * The spec says that unmapping a device with still valid
+	 * ITTEs associated is UNPREDICTABLE. We remove all ITTEs,
+	 * since we cannot leave the memory unreferenced.
+	 */
+	list_for_each_entry_safe(ite, temp, &device->itt_head, ite_list)
+		its_free_ite(kvm, ite);
+
+	vgic_its_invalidate_cache(kvm);
+
+	list_del(&device->dev_list);
+	kfree(device);
+}
+
+/* its lock must be held */
+static void vgic_its_free_device_list(struct kvm *kvm, struct vgic_its *its)
+{
+	struct its_device *cur, *temp;
+
+	list_for_each_entry_safe(cur, temp, &its->device_list, dev_list)
+		vgic_its_free_device(kvm, cur);
+}
+
+/* its lock must be held */
+static void vgic_its_free_collection_list(struct kvm *kvm, struct vgic_its *its)
+{
+	struct its_collection *cur, *temp;
+
+	list_for_each_entry_safe(cur, temp, &its->collection_list, coll_list)
+		vgic_its_free_collection(its, cur->collection_id);
+}
+
+/* Must be called with its_lock mutex held */
+static struct its_device *vgic_its_alloc_device(struct vgic_its *its,
+						u32 device_id, gpa_t itt_addr,
+						u8 num_eventid_bits)
+{
+	struct its_device *device;
+
+	device = kzalloc(sizeof(*device), GFP_KERNEL_ACCOUNT);
+	if (!device)
+		return ERR_PTR(-ENOMEM);
+
+	device->device_id = device_id;
+	device->itt_addr = itt_addr;
+	device->num_eventid_bits = num_eventid_bits;
+	INIT_LIST_HEAD(&device->itt_head);
+
+	list_add_tail(&device->dev_list, &its->device_list);
+	return device;
+}
+
+/*
+ * MAPD maps or unmaps a device ID to Interrupt Translation Tables (ITTs).
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_mapd(struct kvm *kvm, struct vgic_its *its,
+				    u64 *its_cmd)
+{
+	u32 device_id = its_cmd_get_deviceid(its_cmd);
+	bool valid = its_cmd_get_validbit(its_cmd);
+	u8 num_eventid_bits = its_cmd_get_size(its_cmd);
+	gpa_t itt_addr = its_cmd_get_ittaddr(its_cmd);
+	struct its_device *device;
+
+	if (!vgic_its_check_id(its, its->baser_device_table, device_id, NULL))
+		return E_ITS_MAPD_DEVICE_OOR;
+
+	if (valid && num_eventid_bits > VITS_TYPER_IDBITS)
+		return E_ITS_MAPD_ITTSIZE_OOR;
+
+	device = find_its_device(its, device_id);
+
+	/*
+	 * The spec says that calling MAPD on an already mapped device
+	 * invalidates all cached data for this device. We implement this
+	 * by removing the mapping and re-establishing it.
+	 */
+	if (device)
+		vgic_its_free_device(kvm, device);
+
+	/*
+	 * The spec does not say whether unmapping a not-mapped device
+	 * is an error, so we are done in any case.
+	 */
+	if (!valid)
+		return 0;
+
+	device = vgic_its_alloc_device(its, device_id, itt_addr,
+				       num_eventid_bits);
+
+	return PTR_ERR_OR_ZERO(device);
+}
+
+/*
+ * The MAPC command maps collection IDs to redistributors.
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its,
+				    u64 *its_cmd)
+{
+	u16 coll_id;
+	u32 target_addr;
+	struct its_collection *collection;
+	bool valid;
+
+	valid = its_cmd_get_validbit(its_cmd);
+	coll_id = its_cmd_get_collection(its_cmd);
+	target_addr = its_cmd_get_target_addr(its_cmd);
+
+	if (target_addr >= atomic_read(&kvm->online_vcpus))
+		return E_ITS_MAPC_PROCNUM_OOR;
+
+	if (!valid) {
+		vgic_its_free_collection(its, coll_id);
+		vgic_its_invalidate_cache(kvm);
+	} else {
+		collection = find_collection(its, coll_id);
+
+		if (!collection) {
+			int ret;
+
+			if (!vgic_its_check_id(its, its->baser_coll_table,
+						coll_id, NULL))
+				return E_ITS_MAPC_COLLECTION_OOR;
+
+			ret = vgic_its_alloc_collection(its, &collection,
+							coll_id);
+			if (ret)
+				return ret;
+			collection->target_addr = target_addr;
+		} else {
+			collection->target_addr = target_addr;
+			update_affinity_collection(kvm, its, collection);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * The CLEAR command removes the pending state for a particular LPI.
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_clear(struct kvm *kvm, struct vgic_its *its,
+				     u64 *its_cmd)
+{
+	u32 device_id = its_cmd_get_deviceid(its_cmd);
+	u32 event_id = its_cmd_get_id(its_cmd);
+	struct its_ite *ite;
+
+
+	ite = find_ite(its, device_id, event_id);
+	if (!ite)
+		return E_ITS_CLEAR_UNMAPPED_INTERRUPT;
+
+	ite->irq->pending_latch = false;
+
+	if (ite->irq->hw)
+		return irq_set_irqchip_state(ite->irq->host_irq,
+					     IRQCHIP_STATE_PENDING, false);
+
+	return 0;
+}
+
+int vgic_its_inv_lpi(struct kvm *kvm, struct vgic_irq *irq)
+{
+	return update_lpi_config(kvm, irq, NULL, true);
+}
+
+/*
+ * The INV command syncs the configuration bits from the memory table.
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_inv(struct kvm *kvm, struct vgic_its *its,
+				   u64 *its_cmd)
+{
+	u32 device_id = its_cmd_get_deviceid(its_cmd);
+	u32 event_id = its_cmd_get_id(its_cmd);
+	struct its_ite *ite;
+
+
+	ite = find_ite(its, device_id, event_id);
+	if (!ite)
+		return E_ITS_INV_UNMAPPED_INTERRUPT;
+
+	return vgic_its_inv_lpi(kvm, ite->irq);
+}
+
+/**
+ * vgic_its_invall - invalidate all LPIs targetting a given vcpu
+ * @vcpu: the vcpu for which the RD is targetted by an invalidation
+ *
+ * Contrary to the INVALL command, this targets a RD instead of a
+ * collection, and we don't need to hold the its_lock, since no ITS is
+ * involved here.
+ */
+int vgic_its_invall(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	int irq_count, i = 0;
+	u32 *intids;
+
+	irq_count = vgic_copy_lpi_list(kvm, vcpu, &intids);
+	if (irq_count < 0)
+		return irq_count;
+
+	for (i = 0; i < irq_count; i++) {
+		struct vgic_irq *irq = vgic_get_irq(kvm, NULL, intids[i]);
+		if (!irq)
+			continue;
+		update_lpi_config(kvm, irq, vcpu, false);
+		vgic_put_irq(kvm, irq);
+	}
+
+	kfree(intids);
+
+	if (vcpu->arch.vgic_cpu.vgic_v3.its_vpe.its_vm)
+		its_invall_vpe(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe);
+
+	return 0;
+}
+
+/*
+ * The INVALL command requests flushing of all IRQ data in this collection.
+ * Find the VCPU mapped to that collection, then iterate over the VM's list
+ * of mapped LPIs and update the configuration for each IRQ which targets
+ * the specified vcpu. The configuration will be read from the in-memory
+ * configuration table.
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its,
+				      u64 *its_cmd)
+{
+	u32 coll_id = its_cmd_get_collection(its_cmd);
+	struct its_collection *collection;
+	struct kvm_vcpu *vcpu;
+
+	collection = find_collection(its, coll_id);
+	if (!its_is_collection_mapped(collection))
+		return E_ITS_INVALL_UNMAPPED_COLLECTION;
+
+	vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+	vgic_its_invall(vcpu);
+
+	return 0;
+}
+
+/*
+ * The MOVALL command moves the pending state of all IRQs targeting one
+ * redistributor to another. We don't hold the pending state in the VCPUs,
+ * but in the IRQs instead, so there is really not much to do for us here.
+ * However the spec says that no IRQ must target the old redistributor
+ * afterwards, so we make sure that no LPI is using the associated target_vcpu.
+ * This command affects all LPIs in the system that target that redistributor.
+ */
+static int vgic_its_cmd_handle_movall(struct kvm *kvm, struct vgic_its *its,
+				      u64 *its_cmd)
+{
+	u32 target1_addr = its_cmd_get_target_addr(its_cmd);
+	u32 target2_addr = its_cmd_mask_field(its_cmd, 3, 16, 32);
+	struct kvm_vcpu *vcpu1, *vcpu2;
+	struct vgic_irq *irq;
+	u32 *intids;
+	int irq_count, i;
+
+	if (target1_addr >= atomic_read(&kvm->online_vcpus) ||
+	    target2_addr >= atomic_read(&kvm->online_vcpus))
+		return E_ITS_MOVALL_PROCNUM_OOR;
+
+	if (target1_addr == target2_addr)
+		return 0;
+
+	vcpu1 = kvm_get_vcpu(kvm, target1_addr);
+	vcpu2 = kvm_get_vcpu(kvm, target2_addr);
+
+	irq_count = vgic_copy_lpi_list(kvm, vcpu1, &intids);
+	if (irq_count < 0)
+		return irq_count;
+
+	for (i = 0; i < irq_count; i++) {
+		irq = vgic_get_irq(kvm, NULL, intids[i]);
+
+		update_affinity(irq, vcpu2);
+
+		vgic_put_irq(kvm, irq);
+	}
+
+	vgic_its_invalidate_cache(kvm);
+
+	kfree(intids);
+	return 0;
+}
+
+/*
+ * The INT command injects the LPI associated with that DevID/EvID pair.
+ * Must be called with the its_lock mutex held.
+ */
+static int vgic_its_cmd_handle_int(struct kvm *kvm, struct vgic_its *its,
+				   u64 *its_cmd)
+{
+	u32 msi_data = its_cmd_get_id(its_cmd);
+	u64 msi_devid = its_cmd_get_deviceid(its_cmd);
+
+	return vgic_its_trigger_msi(kvm, its, msi_devid, msi_data);
+}
+
+/*
+ * This function is called with the its_cmd lock held, but the ITS data
+ * structure lock dropped.
+ */
+static int vgic_its_handle_command(struct kvm *kvm, struct vgic_its *its,
+				   u64 *its_cmd)
+{
+	int ret = -ENODEV;
+
+	mutex_lock(&its->its_lock);
+	switch (its_cmd_get_command(its_cmd)) {
+	case GITS_CMD_MAPD:
+		ret = vgic_its_cmd_handle_mapd(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_MAPC:
+		ret = vgic_its_cmd_handle_mapc(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_MAPI:
+		ret = vgic_its_cmd_handle_mapi(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_MAPTI:
+		ret = vgic_its_cmd_handle_mapi(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_MOVI:
+		ret = vgic_its_cmd_handle_movi(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_DISCARD:
+		ret = vgic_its_cmd_handle_discard(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_CLEAR:
+		ret = vgic_its_cmd_handle_clear(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_MOVALL:
+		ret = vgic_its_cmd_handle_movall(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_INT:
+		ret = vgic_its_cmd_handle_int(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_INV:
+		ret = vgic_its_cmd_handle_inv(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_INVALL:
+		ret = vgic_its_cmd_handle_invall(kvm, its, its_cmd);
+		break;
+	case GITS_CMD_SYNC:
+		/* we ignore this command: we are in sync all of the time */
+		ret = 0;
+		break;
+	}
+	mutex_unlock(&its->its_lock);
+
+	return ret;
+}
+
+static u64 vgic_sanitise_its_baser(u64 reg)
+{
+	reg = vgic_sanitise_field(reg, GITS_BASER_SHAREABILITY_MASK,
+				  GITS_BASER_SHAREABILITY_SHIFT,
+				  vgic_sanitise_shareability);
+	reg = vgic_sanitise_field(reg, GITS_BASER_INNER_CACHEABILITY_MASK,
+				  GITS_BASER_INNER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_inner_cacheability);
+	reg = vgic_sanitise_field(reg, GITS_BASER_OUTER_CACHEABILITY_MASK,
+				  GITS_BASER_OUTER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_outer_cacheability);
+
+	/* We support only one (ITS) page size: 64K */
+	reg = (reg & ~GITS_BASER_PAGE_SIZE_MASK) | GITS_BASER_PAGE_SIZE_64K;
+
+	return reg;
+}
+
+static u64 vgic_sanitise_its_cbaser(u64 reg)
+{
+	reg = vgic_sanitise_field(reg, GITS_CBASER_SHAREABILITY_MASK,
+				  GITS_CBASER_SHAREABILITY_SHIFT,
+				  vgic_sanitise_shareability);
+	reg = vgic_sanitise_field(reg, GITS_CBASER_INNER_CACHEABILITY_MASK,
+				  GITS_CBASER_INNER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_inner_cacheability);
+	reg = vgic_sanitise_field(reg, GITS_CBASER_OUTER_CACHEABILITY_MASK,
+				  GITS_CBASER_OUTER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_outer_cacheability);
+
+	/* Sanitise the physical address to be 64k aligned. */
+	reg &= ~GENMASK_ULL(15, 12);
+
+	return reg;
+}
+
+static unsigned long vgic_mmio_read_its_cbaser(struct kvm *kvm,
+					       struct vgic_its *its,
+					       gpa_t addr, unsigned int len)
+{
+	return extract_bytes(its->cbaser, addr & 7, len);
+}
+
+static void vgic_mmio_write_its_cbaser(struct kvm *kvm, struct vgic_its *its,
+				       gpa_t addr, unsigned int len,
+				       unsigned long val)
+{
+	/* When GITS_CTLR.Enable is 1, this register is RO. */
+	if (its->enabled)
+		return;
+
+	mutex_lock(&its->cmd_lock);
+	its->cbaser = update_64bit_reg(its->cbaser, addr & 7, len, val);
+	its->cbaser = vgic_sanitise_its_cbaser(its->cbaser);
+	its->creadr = 0;
+	/*
+	 * CWRITER is architecturally UNKNOWN on reset, but we need to reset
+	 * it to CREADR to make sure we start with an empty command buffer.
+	 */
+	its->cwriter = its->creadr;
+	mutex_unlock(&its->cmd_lock);
+}
+
+#define ITS_CMD_BUFFER_SIZE(baser)	((((baser) & 0xff) + 1) << 12)
+#define ITS_CMD_SIZE			32
+#define ITS_CMD_OFFSET(reg)		((reg) & GENMASK(19, 5))
+
+/* Must be called with the cmd_lock held. */
+static void vgic_its_process_commands(struct kvm *kvm, struct vgic_its *its)
+{
+	gpa_t cbaser;
+	u64 cmd_buf[4];
+
+	/* Commands are only processed when the ITS is enabled. */
+	if (!its->enabled)
+		return;
+
+	cbaser = GITS_CBASER_ADDRESS(its->cbaser);
+
+	while (its->cwriter != its->creadr) {
+		int ret = kvm_read_guest_lock(kvm, cbaser + its->creadr,
+					      cmd_buf, ITS_CMD_SIZE);
+		/*
+		 * If kvm_read_guest() fails, this could be due to the guest
+		 * programming a bogus value in CBASER or something else going
+		 * wrong from which we cannot easily recover.
+		 * According to section 6.3.2 in the GICv3 spec we can just
+		 * ignore that command then.
+		 */
+		if (!ret)
+			vgic_its_handle_command(kvm, its, cmd_buf);
+
+		its->creadr += ITS_CMD_SIZE;
+		if (its->creadr == ITS_CMD_BUFFER_SIZE(its->cbaser))
+			its->creadr = 0;
+	}
+}
+
+/*
+ * By writing to CWRITER the guest announces new commands to be processed.
+ * To avoid any races in the first place, we take the its_cmd lock, which
+ * protects our ring buffer variables, so that there is only one user
+ * per ITS handling commands at a given time.
+ */
+static void vgic_mmio_write_its_cwriter(struct kvm *kvm, struct vgic_its *its,
+					gpa_t addr, unsigned int len,
+					unsigned long val)
+{
+	u64 reg;
+
+	if (!its)
+		return;
+
+	mutex_lock(&its->cmd_lock);
+
+	reg = update_64bit_reg(its->cwriter, addr & 7, len, val);
+	reg = ITS_CMD_OFFSET(reg);
+	if (reg >= ITS_CMD_BUFFER_SIZE(its->cbaser)) {
+		mutex_unlock(&its->cmd_lock);
+		return;
+	}
+	its->cwriter = reg;
+
+	vgic_its_process_commands(kvm, its);
+
+	mutex_unlock(&its->cmd_lock);
+}
+
+static unsigned long vgic_mmio_read_its_cwriter(struct kvm *kvm,
+						struct vgic_its *its,
+						gpa_t addr, unsigned int len)
+{
+	return extract_bytes(its->cwriter, addr & 0x7, len);
+}
+
+static unsigned long vgic_mmio_read_its_creadr(struct kvm *kvm,
+					       struct vgic_its *its,
+					       gpa_t addr, unsigned int len)
+{
+	return extract_bytes(its->creadr, addr & 0x7, len);
+}
+
+static int vgic_mmio_uaccess_write_its_creadr(struct kvm *kvm,
+					      struct vgic_its *its,
+					      gpa_t addr, unsigned int len,
+					      unsigned long val)
+{
+	u32 cmd_offset;
+	int ret = 0;
+
+	mutex_lock(&its->cmd_lock);
+
+	if (its->enabled) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	cmd_offset = ITS_CMD_OFFSET(val);
+	if (cmd_offset >= ITS_CMD_BUFFER_SIZE(its->cbaser)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	its->creadr = cmd_offset;
+out:
+	mutex_unlock(&its->cmd_lock);
+	return ret;
+}
+
+#define BASER_INDEX(addr) (((addr) / sizeof(u64)) & 0x7)
+static unsigned long vgic_mmio_read_its_baser(struct kvm *kvm,
+					      struct vgic_its *its,
+					      gpa_t addr, unsigned int len)
+{
+	u64 reg;
+
+	switch (BASER_INDEX(addr)) {
+	case 0:
+		reg = its->baser_device_table;
+		break;
+	case 1:
+		reg = its->baser_coll_table;
+		break;
+	default:
+		reg = 0;
+		break;
+	}
+
+	return extract_bytes(reg, addr & 7, len);
+}
+
+#define GITS_BASER_RO_MASK	(GENMASK_ULL(52, 48) | GENMASK_ULL(58, 56))
+static void vgic_mmio_write_its_baser(struct kvm *kvm,
+				      struct vgic_its *its,
+				      gpa_t addr, unsigned int len,
+				      unsigned long val)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	u64 entry_size, table_type;
+	u64 reg, *regptr, clearbits = 0;
+
+	/* When GITS_CTLR.Enable is 1, we ignore write accesses. */
+	if (its->enabled)
+		return;
+
+	switch (BASER_INDEX(addr)) {
+	case 0:
+		regptr = &its->baser_device_table;
+		entry_size = abi->dte_esz;
+		table_type = GITS_BASER_TYPE_DEVICE;
+		break;
+	case 1:
+		regptr = &its->baser_coll_table;
+		entry_size = abi->cte_esz;
+		table_type = GITS_BASER_TYPE_COLLECTION;
+		clearbits = GITS_BASER_INDIRECT;
+		break;
+	default:
+		return;
+	}
+
+	reg = update_64bit_reg(*regptr, addr & 7, len, val);
+	reg &= ~GITS_BASER_RO_MASK;
+	reg &= ~clearbits;
+
+	reg |= (entry_size - 1) << GITS_BASER_ENTRY_SIZE_SHIFT;
+	reg |= table_type << GITS_BASER_TYPE_SHIFT;
+	reg = vgic_sanitise_its_baser(reg);
+
+	*regptr = reg;
+
+	if (!(reg & GITS_BASER_VALID)) {
+		/* Take the its_lock to prevent a race with a save/restore */
+		mutex_lock(&its->its_lock);
+		switch (table_type) {
+		case GITS_BASER_TYPE_DEVICE:
+			vgic_its_free_device_list(kvm, its);
+			break;
+		case GITS_BASER_TYPE_COLLECTION:
+			vgic_its_free_collection_list(kvm, its);
+			break;
+		}
+		mutex_unlock(&its->its_lock);
+	}
+}
+
+static unsigned long vgic_mmio_read_its_ctlr(struct kvm *vcpu,
+					     struct vgic_its *its,
+					     gpa_t addr, unsigned int len)
+{
+	u32 reg = 0;
+
+	mutex_lock(&its->cmd_lock);
+	if (its->creadr == its->cwriter)
+		reg |= GITS_CTLR_QUIESCENT;
+	if (its->enabled)
+		reg |= GITS_CTLR_ENABLE;
+	mutex_unlock(&its->cmd_lock);
+
+	return reg;
+}
+
+static void vgic_mmio_write_its_ctlr(struct kvm *kvm, struct vgic_its *its,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	mutex_lock(&its->cmd_lock);
+
+	/*
+	 * It is UNPREDICTABLE to enable the ITS if any of the CBASER or
+	 * device/collection BASER are invalid
+	 */
+	if (!its->enabled && (val & GITS_CTLR_ENABLE) &&
+		(!(its->baser_device_table & GITS_BASER_VALID) ||
+		 !(its->baser_coll_table & GITS_BASER_VALID) ||
+		 !(its->cbaser & GITS_CBASER_VALID)))
+		goto out;
+
+	its->enabled = !!(val & GITS_CTLR_ENABLE);
+	if (!its->enabled)
+		vgic_its_invalidate_cache(kvm);
+
+	/*
+	 * Try to process any pending commands. This function bails out early
+	 * if the ITS is disabled or no commands have been queued.
+	 */
+	vgic_its_process_commands(kvm, its);
+
+out:
+	mutex_unlock(&its->cmd_lock);
+}
+
+#define REGISTER_ITS_DESC(off, rd, wr, length, acc)		\
+{								\
+	.reg_offset = off,					\
+	.len = length,						\
+	.access_flags = acc,					\
+	.its_read = rd,						\
+	.its_write = wr,					\
+}
+
+#define REGISTER_ITS_DESC_UACCESS(off, rd, wr, uwr, length, acc)\
+{								\
+	.reg_offset = off,					\
+	.len = length,						\
+	.access_flags = acc,					\
+	.its_read = rd,						\
+	.its_write = wr,					\
+	.uaccess_its_write = uwr,				\
+}
+
+static void its_mmio_write_wi(struct kvm *kvm, struct vgic_its *its,
+			      gpa_t addr, unsigned int len, unsigned long val)
+{
+	/* Ignore */
+}
+
+static struct vgic_register_region its_registers[] = {
+	REGISTER_ITS_DESC(GITS_CTLR,
+		vgic_mmio_read_its_ctlr, vgic_mmio_write_its_ctlr, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC_UACCESS(GITS_IIDR,
+		vgic_mmio_read_its_iidr, its_mmio_write_wi,
+		vgic_mmio_uaccess_write_its_iidr, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC(GITS_TYPER,
+		vgic_mmio_read_its_typer, its_mmio_write_wi, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC(GITS_CBASER,
+		vgic_mmio_read_its_cbaser, vgic_mmio_write_its_cbaser, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC(GITS_CWRITER,
+		vgic_mmio_read_its_cwriter, vgic_mmio_write_its_cwriter, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC_UACCESS(GITS_CREADR,
+		vgic_mmio_read_its_creadr, its_mmio_write_wi,
+		vgic_mmio_uaccess_write_its_creadr, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC(GITS_BASER,
+		vgic_mmio_read_its_baser, vgic_mmio_write_its_baser, 0x40,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_ITS_DESC(GITS_IDREGS_BASE,
+		vgic_mmio_read_its_idregs, its_mmio_write_wi, 0x30,
+		VGIC_ACCESS_32bit),
+};
+
+/* This is called on setting the LPI enable bit in the redistributor. */
+void vgic_enable_lpis(struct kvm_vcpu *vcpu)
+{
+	if (!(vcpu->arch.vgic_cpu.pendbaser & GICR_PENDBASER_PTZ))
+		its_sync_lpi_pending_table(vcpu);
+}
+
+static int vgic_register_its_iodev(struct kvm *kvm, struct vgic_its *its,
+				   u64 addr)
+{
+	struct vgic_io_device *iodev = &its->iodev;
+	int ret;
+
+	mutex_lock(&kvm->slots_lock);
+	if (!IS_VGIC_ADDR_UNDEF(its->vgic_its_base)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	its->vgic_its_base = addr;
+	iodev->regions = its_registers;
+	iodev->nr_regions = ARRAY_SIZE(its_registers);
+	kvm_iodevice_init(&iodev->dev, &kvm_io_gic_ops);
+
+	iodev->base_addr = its->vgic_its_base;
+	iodev->iodev_type = IODEV_ITS;
+	iodev->its = its;
+	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, iodev->base_addr,
+				      KVM_VGIC_V3_ITS_SIZE, &iodev->dev);
+out:
+	mutex_unlock(&kvm->slots_lock);
+
+	return ret;
+}
+
+/* Default is 16 cached LPIs per vcpu */
+#define LPI_DEFAULT_PCPU_CACHE_SIZE	16
+
+void vgic_lpi_translation_cache_init(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned int sz;
+	int i;
+
+	if (!list_empty(&dist->lpi_translation_cache))
+		return;
+
+	sz = atomic_read(&kvm->online_vcpus) * LPI_DEFAULT_PCPU_CACHE_SIZE;
+
+	for (i = 0; i < sz; i++) {
+		struct vgic_translation_cache_entry *cte;
+
+		/* An allocation failure is not fatal */
+		cte = kzalloc(sizeof(*cte), GFP_KERNEL_ACCOUNT);
+		if (WARN_ON(!cte))
+			break;
+
+		INIT_LIST_HEAD(&cte->entry);
+		list_add(&cte->entry, &dist->lpi_translation_cache);
+	}
+}
+
+void vgic_lpi_translation_cache_destroy(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_translation_cache_entry *cte, *tmp;
+
+	vgic_its_invalidate_cache(kvm);
+
+	list_for_each_entry_safe(cte, tmp,
+				 &dist->lpi_translation_cache, entry) {
+		list_del(&cte->entry);
+		kfree(cte);
+	}
+}
+
+#define INITIAL_BASER_VALUE						  \
+	(GIC_BASER_CACHEABILITY(GITS_BASER, INNER, RaWb)		| \
+	 GIC_BASER_CACHEABILITY(GITS_BASER, OUTER, SameAsInner)		| \
+	 GIC_BASER_SHAREABILITY(GITS_BASER, InnerShareable)		| \
+	 GITS_BASER_PAGE_SIZE_64K)
+
+#define INITIAL_PROPBASER_VALUE						  \
+	(GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, RaWb)		| \
+	 GIC_BASER_CACHEABILITY(GICR_PROPBASER, OUTER, SameAsInner)	| \
+	 GIC_BASER_SHAREABILITY(GICR_PROPBASER, InnerShareable))
+
+static int vgic_its_create(struct kvm_device *dev, u32 type)
+{
+	int ret;
+	struct vgic_its *its;
+
+	if (type != KVM_DEV_TYPE_ARM_VGIC_ITS)
+		return -ENODEV;
+
+	its = kzalloc(sizeof(struct vgic_its), GFP_KERNEL_ACCOUNT);
+	if (!its)
+		return -ENOMEM;
+
+	mutex_lock(&dev->kvm->arch.config_lock);
+
+	if (vgic_initialized(dev->kvm)) {
+		ret = vgic_v4_init(dev->kvm);
+		if (ret < 0) {
+			mutex_unlock(&dev->kvm->arch.config_lock);
+			kfree(its);
+			return ret;
+		}
+
+		vgic_lpi_translation_cache_init(dev->kvm);
+	}
+
+	mutex_init(&its->its_lock);
+	mutex_init(&its->cmd_lock);
+
+	/* Yep, even more trickery for lock ordering... */
+#ifdef CONFIG_LOCKDEP
+	mutex_lock(&its->cmd_lock);
+	mutex_lock(&its->its_lock);
+	mutex_unlock(&its->its_lock);
+	mutex_unlock(&its->cmd_lock);
+#endif
+
+	its->vgic_its_base = VGIC_ADDR_UNDEF;
+
+	INIT_LIST_HEAD(&its->device_list);
+	INIT_LIST_HEAD(&its->collection_list);
+
+	dev->kvm->arch.vgic.msis_require_devid = true;
+	dev->kvm->arch.vgic.has_its = true;
+	its->enabled = false;
+	its->dev = dev;
+
+	its->baser_device_table = INITIAL_BASER_VALUE			|
+		((u64)GITS_BASER_TYPE_DEVICE << GITS_BASER_TYPE_SHIFT);
+	its->baser_coll_table = INITIAL_BASER_VALUE |
+		((u64)GITS_BASER_TYPE_COLLECTION << GITS_BASER_TYPE_SHIFT);
+	dev->kvm->arch.vgic.propbaser = INITIAL_PROPBASER_VALUE;
+
+	dev->private = its;
+
+	ret = vgic_its_set_abi(its, NR_ITS_ABIS - 1);
+
+	mutex_unlock(&dev->kvm->arch.config_lock);
+
+	return ret;
+}
+
+static void vgic_its_destroy(struct kvm_device *kvm_dev)
+{
+	struct kvm *kvm = kvm_dev->kvm;
+	struct vgic_its *its = kvm_dev->private;
+
+	mutex_lock(&its->its_lock);
+
+	vgic_its_free_device_list(kvm, its);
+	vgic_its_free_collection_list(kvm, its);
+
+	mutex_unlock(&its->its_lock);
+	kfree(its);
+	kfree(kvm_dev);/* alloc by kvm_ioctl_create_device, free by .destroy */
+}
+
+static int vgic_its_has_attr_regs(struct kvm_device *dev,
+				  struct kvm_device_attr *attr)
+{
+	const struct vgic_register_region *region;
+	gpa_t offset = attr->attr;
+	int align;
+
+	align = (offset < GITS_TYPER) || (offset >= GITS_PIDR4) ? 0x3 : 0x7;
+
+	if (offset & align)
+		return -EINVAL;
+
+	region = vgic_find_mmio_region(its_registers,
+				       ARRAY_SIZE(its_registers),
+				       offset);
+	if (!region)
+		return -ENXIO;
+
+	return 0;
+}
+
+static int vgic_its_attr_regs_access(struct kvm_device *dev,
+				     struct kvm_device_attr *attr,
+				     u64 *reg, bool is_write)
+{
+	const struct vgic_register_region *region;
+	struct vgic_its *its;
+	gpa_t addr, offset;
+	unsigned int len;
+	int align, ret = 0;
+
+	its = dev->private;
+	offset = attr->attr;
+
+	/*
+	 * Although the spec supports upper/lower 32-bit accesses to
+	 * 64-bit ITS registers, the userspace ABI requires 64-bit
+	 * accesses to all 64-bit wide registers. We therefore only
+	 * support 32-bit accesses to GITS_CTLR, GITS_IIDR and GITS ID
+	 * registers
+	 */
+	if ((offset < GITS_TYPER) || (offset >= GITS_PIDR4))
+		align = 0x3;
+	else
+		align = 0x7;
+
+	if (offset & align)
+		return -EINVAL;
+
+	mutex_lock(&dev->kvm->lock);
+
+	if (!lock_all_vcpus(dev->kvm)) {
+		mutex_unlock(&dev->kvm->lock);
+		return -EBUSY;
+	}
+
+	mutex_lock(&dev->kvm->arch.config_lock);
+
+	if (IS_VGIC_ADDR_UNDEF(its->vgic_its_base)) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	region = vgic_find_mmio_region(its_registers,
+				       ARRAY_SIZE(its_registers),
+				       offset);
+	if (!region) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	addr = its->vgic_its_base + offset;
+
+	len = region->access_flags & VGIC_ACCESS_64bit ? 8 : 4;
+
+	if (is_write) {
+		if (region->uaccess_its_write)
+			ret = region->uaccess_its_write(dev->kvm, its, addr,
+							len, *reg);
+		else
+			region->its_write(dev->kvm, its, addr, len, *reg);
+	} else {
+		*reg = region->its_read(dev->kvm, its, addr, len);
+	}
+out:
+	mutex_unlock(&dev->kvm->arch.config_lock);
+	unlock_all_vcpus(dev->kvm);
+	mutex_unlock(&dev->kvm->lock);
+	return ret;
+}
+
+static u32 compute_next_devid_offset(struct list_head *h,
+				     struct its_device *dev)
+{
+	struct its_device *next;
+	u32 next_offset;
+
+	if (list_is_last(&dev->dev_list, h))
+		return 0;
+	next = list_next_entry(dev, dev_list);
+	next_offset = next->device_id - dev->device_id;
+
+	return min_t(u32, next_offset, VITS_DTE_MAX_DEVID_OFFSET);
+}
+
+static u32 compute_next_eventid_offset(struct list_head *h, struct its_ite *ite)
+{
+	struct its_ite *next;
+	u32 next_offset;
+
+	if (list_is_last(&ite->ite_list, h))
+		return 0;
+	next = list_next_entry(ite, ite_list);
+	next_offset = next->event_id - ite->event_id;
+
+	return min_t(u32, next_offset, VITS_ITE_MAX_EVENTID_OFFSET);
+}
+
+/**
+ * entry_fn_t - Callback called on a table entry restore path
+ * @its: its handle
+ * @id: id of the entry
+ * @entry: pointer to the entry
+ * @opaque: pointer to an opaque data
+ *
+ * Return: < 0 on error, 0 if last element was identified, id offset to next
+ * element otherwise
+ */
+typedef int (*entry_fn_t)(struct vgic_its *its, u32 id, void *entry,
+			  void *opaque);
+
+/**
+ * scan_its_table - Scan a contiguous table in guest RAM and applies a function
+ * to each entry
+ *
+ * @its: its handle
+ * @base: base gpa of the table
+ * @size: size of the table in bytes
+ * @esz: entry size in bytes
+ * @start_id: the ID of the first entry in the table
+ * (non zero for 2d level tables)
+ * @fn: function to apply on each entry
+ *
+ * Return: < 0 on error, 0 if last element was identified, 1 otherwise
+ * (the last element may not be found on second level tables)
+ */
+static int scan_its_table(struct vgic_its *its, gpa_t base, int size, u32 esz,
+			  int start_id, entry_fn_t fn, void *opaque)
+{
+	struct kvm *kvm = its->dev->kvm;
+	unsigned long len = size;
+	int id = start_id;
+	gpa_t gpa = base;
+	char entry[ESZ_MAX];
+	int ret;
+
+	memset(entry, 0, esz);
+
+	while (true) {
+		int next_offset;
+		size_t byte_offset;
+
+		ret = kvm_read_guest_lock(kvm, gpa, entry, esz);
+		if (ret)
+			return ret;
+
+		next_offset = fn(its, id, entry, opaque);
+		if (next_offset <= 0)
+			return next_offset;
+
+		byte_offset = next_offset * esz;
+		if (byte_offset >= len)
+			break;
+
+		id += next_offset;
+		gpa += byte_offset;
+		len -= byte_offset;
+	}
+	return 1;
+}
+
+/**
+ * vgic_its_save_ite - Save an interrupt translation entry at @gpa
+ */
+static int vgic_its_save_ite(struct vgic_its *its, struct its_device *dev,
+			      struct its_ite *ite, gpa_t gpa, int ite_esz)
+{
+	struct kvm *kvm = its->dev->kvm;
+	u32 next_offset;
+	u64 val;
+
+	next_offset = compute_next_eventid_offset(&dev->itt_head, ite);
+	val = ((u64)next_offset << KVM_ITS_ITE_NEXT_SHIFT) |
+	       ((u64)ite->irq->intid << KVM_ITS_ITE_PINTID_SHIFT) |
+		ite->collection->collection_id;
+	val = cpu_to_le64(val);
+	return vgic_write_guest_lock(kvm, gpa, &val, ite_esz);
+}
+
+/**
+ * vgic_its_restore_ite - restore an interrupt translation entry
+ * @event_id: id used for indexing
+ * @ptr: pointer to the ITE entry
+ * @opaque: pointer to the its_device
+ */
+static int vgic_its_restore_ite(struct vgic_its *its, u32 event_id,
+				void *ptr, void *opaque)
+{
+	struct its_device *dev = opaque;
+	struct its_collection *collection;
+	struct kvm *kvm = its->dev->kvm;
+	struct kvm_vcpu *vcpu = NULL;
+	u64 val;
+	u64 *p = (u64 *)ptr;
+	struct vgic_irq *irq;
+	u32 coll_id, lpi_id;
+	struct its_ite *ite;
+	u32 offset;
+
+	val = *p;
+
+	val = le64_to_cpu(val);
+
+	coll_id = val & KVM_ITS_ITE_ICID_MASK;
+	lpi_id = (val & KVM_ITS_ITE_PINTID_MASK) >> KVM_ITS_ITE_PINTID_SHIFT;
+
+	if (!lpi_id)
+		return 1; /* invalid entry, no choice but to scan next entry */
+
+	if (lpi_id < VGIC_MIN_LPI)
+		return -EINVAL;
+
+	offset = val >> KVM_ITS_ITE_NEXT_SHIFT;
+	if (event_id + offset >= BIT_ULL(dev->num_eventid_bits))
+		return -EINVAL;
+
+	collection = find_collection(its, coll_id);
+	if (!collection)
+		return -EINVAL;
+
+	if (!vgic_its_check_event_id(its, dev, event_id))
+		return -EINVAL;
+
+	ite = vgic_its_alloc_ite(dev, collection, event_id);
+	if (IS_ERR(ite))
+		return PTR_ERR(ite);
+
+	if (its_is_collection_mapped(collection))
+		vcpu = kvm_get_vcpu(kvm, collection->target_addr);
+
+	irq = vgic_add_lpi(kvm, lpi_id, vcpu);
+	if (IS_ERR(irq)) {
+		its_free_ite(kvm, ite);
+		return PTR_ERR(irq);
+	}
+	ite->irq = irq;
+
+	return offset;
+}
+
+static int vgic_its_ite_cmp(void *priv, const struct list_head *a,
+			    const struct list_head *b)
+{
+	struct its_ite *itea = container_of(a, struct its_ite, ite_list);
+	struct its_ite *iteb = container_of(b, struct its_ite, ite_list);
+
+	if (itea->event_id < iteb->event_id)
+		return -1;
+	else
+		return 1;
+}
+
+static int vgic_its_save_itt(struct vgic_its *its, struct its_device *device)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	gpa_t base = device->itt_addr;
+	struct its_ite *ite;
+	int ret;
+	int ite_esz = abi->ite_esz;
+
+	list_sort(NULL, &device->itt_head, vgic_its_ite_cmp);
+
+	list_for_each_entry(ite, &device->itt_head, ite_list) {
+		gpa_t gpa = base + ite->event_id * ite_esz;
+
+		/*
+		 * If an LPI carries the HW bit, this means that this
+		 * interrupt is controlled by GICv4, and we do not
+		 * have direct access to that state without GICv4.1.
+		 * Let's simply fail the save operation...
+		 */
+		if (ite->irq->hw && !kvm_vgic_global_state.has_gicv4_1)
+			return -EACCES;
+
+		ret = vgic_its_save_ite(its, device, ite, gpa, ite_esz);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+/**
+ * vgic_its_restore_itt - restore the ITT of a device
+ *
+ * @its: its handle
+ * @dev: device handle
+ *
+ * Return 0 on success, < 0 on error
+ */
+static int vgic_its_restore_itt(struct vgic_its *its, struct its_device *dev)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	gpa_t base = dev->itt_addr;
+	int ret;
+	int ite_esz = abi->ite_esz;
+	size_t max_size = BIT_ULL(dev->num_eventid_bits) * ite_esz;
+
+	ret = scan_its_table(its, base, max_size, ite_esz, 0,
+			     vgic_its_restore_ite, dev);
+
+	/* scan_its_table returns +1 if all ITEs are invalid */
+	if (ret > 0)
+		ret = 0;
+
+	return ret;
+}
+
+/**
+ * vgic_its_save_dte - Save a device table entry at a given GPA
+ *
+ * @its: ITS handle
+ * @dev: ITS device
+ * @ptr: GPA
+ */
+static int vgic_its_save_dte(struct vgic_its *its, struct its_device *dev,
+			     gpa_t ptr, int dte_esz)
+{
+	struct kvm *kvm = its->dev->kvm;
+	u64 val, itt_addr_field;
+	u32 next_offset;
+
+	itt_addr_field = dev->itt_addr >> 8;
+	next_offset = compute_next_devid_offset(&its->device_list, dev);
+	val = (1ULL << KVM_ITS_DTE_VALID_SHIFT |
+	       ((u64)next_offset << KVM_ITS_DTE_NEXT_SHIFT) |
+	       (itt_addr_field << KVM_ITS_DTE_ITTADDR_SHIFT) |
+		(dev->num_eventid_bits - 1));
+	val = cpu_to_le64(val);
+	return vgic_write_guest_lock(kvm, ptr, &val, dte_esz);
+}
+
+/**
+ * vgic_its_restore_dte - restore a device table entry
+ *
+ * @its: its handle
+ * @id: device id the DTE corresponds to
+ * @ptr: kernel VA where the 8 byte DTE is located
+ * @opaque: unused
+ *
+ * Return: < 0 on error, 0 if the dte is the last one, id offset to the
+ * next dte otherwise
+ */
+static int vgic_its_restore_dte(struct vgic_its *its, u32 id,
+				void *ptr, void *opaque)
+{
+	struct its_device *dev;
+	u64 baser = its->baser_device_table;
+	gpa_t itt_addr;
+	u8 num_eventid_bits;
+	u64 entry = *(u64 *)ptr;
+	bool valid;
+	u32 offset;
+	int ret;
+
+	entry = le64_to_cpu(entry);
+
+	valid = entry >> KVM_ITS_DTE_VALID_SHIFT;
+	num_eventid_bits = (entry & KVM_ITS_DTE_SIZE_MASK) + 1;
+	itt_addr = ((entry & KVM_ITS_DTE_ITTADDR_MASK)
+			>> KVM_ITS_DTE_ITTADDR_SHIFT) << 8;
+
+	if (!valid)
+		return 1;
+
+	/* dte entry is valid */
+	offset = (entry & KVM_ITS_DTE_NEXT_MASK) >> KVM_ITS_DTE_NEXT_SHIFT;
+
+	if (!vgic_its_check_id(its, baser, id, NULL))
+		return -EINVAL;
+
+	dev = vgic_its_alloc_device(its, id, itt_addr, num_eventid_bits);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
+
+	ret = vgic_its_restore_itt(its, dev);
+	if (ret) {
+		vgic_its_free_device(its->dev->kvm, dev);
+		return ret;
+	}
+
+	return offset;
+}
+
+static int vgic_its_device_cmp(void *priv, const struct list_head *a,
+			       const struct list_head *b)
+{
+	struct its_device *deva = container_of(a, struct its_device, dev_list);
+	struct its_device *devb = container_of(b, struct its_device, dev_list);
+
+	if (deva->device_id < devb->device_id)
+		return -1;
+	else
+		return 1;
+}
+
+/**
+ * vgic_its_save_device_tables - Save the device table and all ITT
+ * into guest RAM
+ *
+ * L1/L2 handling is hidden by vgic_its_check_id() helper which directly
+ * returns the GPA of the device entry
+ */
+static int vgic_its_save_device_tables(struct vgic_its *its)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	u64 baser = its->baser_device_table;
+	struct its_device *dev;
+	int dte_esz = abi->dte_esz;
+
+	if (!(baser & GITS_BASER_VALID))
+		return 0;
+
+	list_sort(NULL, &its->device_list, vgic_its_device_cmp);
+
+	list_for_each_entry(dev, &its->device_list, dev_list) {
+		int ret;
+		gpa_t eaddr;
+
+		if (!vgic_its_check_id(its, baser,
+				       dev->device_id, &eaddr))
+			return -EINVAL;
+
+		ret = vgic_its_save_itt(its, dev);
+		if (ret)
+			return ret;
+
+		ret = vgic_its_save_dte(its, dev, eaddr, dte_esz);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+/**
+ * handle_l1_dte - callback used for L1 device table entries (2 stage case)
+ *
+ * @its: its handle
+ * @id: index of the entry in the L1 table
+ * @addr: kernel VA
+ * @opaque: unused
+ *
+ * L1 table entries are scanned by steps of 1 entry
+ * Return < 0 if error, 0 if last dte was found when scanning the L2
+ * table, +1 otherwise (meaning next L1 entry must be scanned)
+ */
+static int handle_l1_dte(struct vgic_its *its, u32 id, void *addr,
+			 void *opaque)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	int l2_start_id = id * (SZ_64K / abi->dte_esz);
+	u64 entry = *(u64 *)addr;
+	int dte_esz = abi->dte_esz;
+	gpa_t gpa;
+	int ret;
+
+	entry = le64_to_cpu(entry);
+
+	if (!(entry & KVM_ITS_L1E_VALID_MASK))
+		return 1;
+
+	gpa = entry & KVM_ITS_L1E_ADDR_MASK;
+
+	ret = scan_its_table(its, gpa, SZ_64K, dte_esz,
+			     l2_start_id, vgic_its_restore_dte, NULL);
+
+	return ret;
+}
+
+/**
+ * vgic_its_restore_device_tables - Restore the device table and all ITT
+ * from guest RAM to internal data structs
+ */
+static int vgic_its_restore_device_tables(struct vgic_its *its)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	u64 baser = its->baser_device_table;
+	int l1_esz, ret;
+	int l1_tbl_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
+	gpa_t l1_gpa;
+
+	if (!(baser & GITS_BASER_VALID))
+		return 0;
+
+	l1_gpa = GITS_BASER_ADDR_48_to_52(baser);
+
+	if (baser & GITS_BASER_INDIRECT) {
+		l1_esz = GITS_LVL1_ENTRY_SIZE;
+		ret = scan_its_table(its, l1_gpa, l1_tbl_size, l1_esz, 0,
+				     handle_l1_dte, NULL);
+	} else {
+		l1_esz = abi->dte_esz;
+		ret = scan_its_table(its, l1_gpa, l1_tbl_size, l1_esz, 0,
+				     vgic_its_restore_dte, NULL);
+	}
+
+	/* scan_its_table returns +1 if all entries are invalid */
+	if (ret > 0)
+		ret = 0;
+
+	if (ret < 0)
+		vgic_its_free_device_list(its->dev->kvm, its);
+
+	return ret;
+}
+
+static int vgic_its_save_cte(struct vgic_its *its,
+			     struct its_collection *collection,
+			     gpa_t gpa, int esz)
+{
+	u64 val;
+
+	val = (1ULL << KVM_ITS_CTE_VALID_SHIFT |
+	       ((u64)collection->target_addr << KVM_ITS_CTE_RDBASE_SHIFT) |
+	       collection->collection_id);
+	val = cpu_to_le64(val);
+	return vgic_write_guest_lock(its->dev->kvm, gpa, &val, esz);
+}
+
+/*
+ * Restore a collection entry into the ITS collection table.
+ * Return +1 on success, 0 if the entry was invalid (which should be
+ * interpreted as end-of-table), and a negative error value for generic errors.
+ */
+static int vgic_its_restore_cte(struct vgic_its *its, gpa_t gpa, int esz)
+{
+	struct its_collection *collection;
+	struct kvm *kvm = its->dev->kvm;
+	u32 target_addr, coll_id;
+	u64 val;
+	int ret;
+
+	BUG_ON(esz > sizeof(val));
+	ret = kvm_read_guest_lock(kvm, gpa, &val, esz);
+	if (ret)
+		return ret;
+	val = le64_to_cpu(val);
+	if (!(val & KVM_ITS_CTE_VALID_MASK))
+		return 0;
+
+	target_addr = (u32)(val >> KVM_ITS_CTE_RDBASE_SHIFT);
+	coll_id = val & KVM_ITS_CTE_ICID_MASK;
+
+	if (target_addr != COLLECTION_NOT_MAPPED &&
+	    target_addr >= atomic_read(&kvm->online_vcpus))
+		return -EINVAL;
+
+	collection = find_collection(its, coll_id);
+	if (collection)
+		return -EEXIST;
+
+	if (!vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL))
+		return -EINVAL;
+
+	ret = vgic_its_alloc_collection(its, &collection, coll_id);
+	if (ret)
+		return ret;
+	collection->target_addr = target_addr;
+	return 1;
+}
+
+/**
+ * vgic_its_save_collection_table - Save the collection table into
+ * guest RAM
+ */
+static int vgic_its_save_collection_table(struct vgic_its *its)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	u64 baser = its->baser_coll_table;
+	gpa_t gpa = GITS_BASER_ADDR_48_to_52(baser);
+	struct its_collection *collection;
+	u64 val;
+	size_t max_size, filled = 0;
+	int ret, cte_esz = abi->cte_esz;
+
+	if (!(baser & GITS_BASER_VALID))
+		return 0;
+
+	max_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
+
+	list_for_each_entry(collection, &its->collection_list, coll_list) {
+		ret = vgic_its_save_cte(its, collection, gpa, cte_esz);
+		if (ret)
+			return ret;
+		gpa += cte_esz;
+		filled += cte_esz;
+	}
+
+	if (filled == max_size)
+		return 0;
+
+	/*
+	 * table is not fully filled, add a last dummy element
+	 * with valid bit unset
+	 */
+	val = 0;
+	BUG_ON(cte_esz > sizeof(val));
+	ret = vgic_write_guest_lock(its->dev->kvm, gpa, &val, cte_esz);
+	return ret;
+}
+
+/**
+ * vgic_its_restore_collection_table - reads the collection table
+ * in guest memory and restores the ITS internal state. Requires the
+ * BASER registers to be restored before.
+ */
+static int vgic_its_restore_collection_table(struct vgic_its *its)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	u64 baser = its->baser_coll_table;
+	int cte_esz = abi->cte_esz;
+	size_t max_size, read = 0;
+	gpa_t gpa;
+	int ret;
+
+	if (!(baser & GITS_BASER_VALID))
+		return 0;
+
+	gpa = GITS_BASER_ADDR_48_to_52(baser);
+
+	max_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
+
+	while (read < max_size) {
+		ret = vgic_its_restore_cte(its, gpa, cte_esz);
+		if (ret <= 0)
+			break;
+		gpa += cte_esz;
+		read += cte_esz;
+	}
+
+	if (ret > 0)
+		return 0;
+
+	if (ret < 0)
+		vgic_its_free_collection_list(its->dev->kvm, its);
+
+	return ret;
+}
+
+/**
+ * vgic_its_save_tables_v0 - Save the ITS tables into guest ARM
+ * according to v0 ABI
+ */
+static int vgic_its_save_tables_v0(struct vgic_its *its)
+{
+	int ret;
+
+	ret = vgic_its_save_device_tables(its);
+	if (ret)
+		return ret;
+
+	return vgic_its_save_collection_table(its);
+}
+
+/**
+ * vgic_its_restore_tables_v0 - Restore the ITS tables from guest RAM
+ * to internal data structs according to V0 ABI
+ *
+ */
+static int vgic_its_restore_tables_v0(struct vgic_its *its)
+{
+	int ret;
+
+	ret = vgic_its_restore_collection_table(its);
+	if (ret)
+		return ret;
+
+	ret = vgic_its_restore_device_tables(its);
+	if (ret)
+		vgic_its_free_collection_list(its->dev->kvm, its);
+	return ret;
+}
+
+static int vgic_its_commit_v0(struct vgic_its *its)
+{
+	const struct vgic_its_abi *abi;
+
+	abi = vgic_its_get_abi(its);
+	its->baser_coll_table &= ~GITS_BASER_ENTRY_SIZE_MASK;
+	its->baser_device_table &= ~GITS_BASER_ENTRY_SIZE_MASK;
+
+	its->baser_coll_table |= (GIC_ENCODE_SZ(abi->cte_esz, 5)
+					<< GITS_BASER_ENTRY_SIZE_SHIFT);
+
+	its->baser_device_table |= (GIC_ENCODE_SZ(abi->dte_esz, 5)
+					<< GITS_BASER_ENTRY_SIZE_SHIFT);
+	return 0;
+}
+
+static void vgic_its_reset(struct kvm *kvm, struct vgic_its *its)
+{
+	/* We need to keep the ABI specific field values */
+	its->baser_coll_table &= ~GITS_BASER_VALID;
+	its->baser_device_table &= ~GITS_BASER_VALID;
+	its->cbaser = 0;
+	its->creadr = 0;
+	its->cwriter = 0;
+	its->enabled = 0;
+	vgic_its_free_device_list(kvm, its);
+	vgic_its_free_collection_list(kvm, its);
+}
+
+static int vgic_its_has_attr(struct kvm_device *dev,
+			     struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR:
+		switch (attr->attr) {
+		case KVM_VGIC_ITS_ADDR_TYPE:
+			return 0;
+		}
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_CTRL:
+		switch (attr->attr) {
+		case KVM_DEV_ARM_VGIC_CTRL_INIT:
+			return 0;
+		case KVM_DEV_ARM_ITS_CTRL_RESET:
+			return 0;
+		case KVM_DEV_ARM_ITS_SAVE_TABLES:
+			return 0;
+		case KVM_DEV_ARM_ITS_RESTORE_TABLES:
+			return 0;
+		}
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_ITS_REGS:
+		return vgic_its_has_attr_regs(dev, attr);
+	}
+	return -ENXIO;
+}
+
+static int vgic_its_ctrl(struct kvm *kvm, struct vgic_its *its, u64 attr)
+{
+	const struct vgic_its_abi *abi = vgic_its_get_abi(its);
+	int ret = 0;
+
+	if (attr == KVM_DEV_ARM_VGIC_CTRL_INIT) /* Nothing to do */
+		return 0;
+
+	mutex_lock(&kvm->lock);
+
+	if (!lock_all_vcpus(kvm)) {
+		mutex_unlock(&kvm->lock);
+		return -EBUSY;
+	}
+
+	mutex_lock(&kvm->arch.config_lock);
+	mutex_lock(&its->its_lock);
+
+	switch (attr) {
+	case KVM_DEV_ARM_ITS_CTRL_RESET:
+		vgic_its_reset(kvm, its);
+		break;
+	case KVM_DEV_ARM_ITS_SAVE_TABLES:
+		ret = abi->save_tables(its);
+		break;
+	case KVM_DEV_ARM_ITS_RESTORE_TABLES:
+		ret = abi->restore_tables(its);
+		break;
+	}
+
+	mutex_unlock(&its->its_lock);
+	mutex_unlock(&kvm->arch.config_lock);
+	unlock_all_vcpus(kvm);
+	mutex_unlock(&kvm->lock);
+	return ret;
+}
+
+/*
+ * kvm_arch_allow_write_without_running_vcpu - allow writing guest memory
+ * without the running VCPU when dirty ring is enabled.
+ *
+ * The running VCPU is required to track dirty guest pages when dirty ring
+ * is enabled. Otherwise, the backup bitmap should be used to track the
+ * dirty guest pages. When vgic/its tables are being saved, the backup
+ * bitmap is used to track the dirty guest pages due to the missed running
+ * VCPU in the period.
+ */
+bool kvm_arch_allow_write_without_running_vcpu(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+
+	return dist->table_write_in_progress;
+}
+
+static int vgic_its_set_attr(struct kvm_device *dev,
+			     struct kvm_device_attr *attr)
+{
+	struct vgic_its *its = dev->private;
+	int ret;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR: {
+		u64 __user *uaddr = (u64 __user *)(long)attr->addr;
+		unsigned long type = (unsigned long)attr->attr;
+		u64 addr;
+
+		if (type != KVM_VGIC_ITS_ADDR_TYPE)
+			return -ENODEV;
+
+		if (copy_from_user(&addr, uaddr, sizeof(addr)))
+			return -EFAULT;
+
+		ret = vgic_check_iorange(dev->kvm, its->vgic_its_base,
+					 addr, SZ_64K, KVM_VGIC_V3_ITS_SIZE);
+		if (ret)
+			return ret;
+
+		return vgic_register_its_iodev(dev->kvm, its, addr);
+	}
+	case KVM_DEV_ARM_VGIC_GRP_CTRL:
+		return vgic_its_ctrl(dev->kvm, its, attr->attr);
+	case KVM_DEV_ARM_VGIC_GRP_ITS_REGS: {
+		u64 __user *uaddr = (u64 __user *)(long)attr->addr;
+		u64 reg;
+
+		if (get_user(reg, uaddr))
+			return -EFAULT;
+
+		return vgic_its_attr_regs_access(dev, attr, &reg, true);
+	}
+	}
+	return -ENXIO;
+}
+
+static int vgic_its_get_attr(struct kvm_device *dev,
+			     struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR: {
+		struct vgic_its *its = dev->private;
+		u64 addr = its->vgic_its_base;
+		u64 __user *uaddr = (u64 __user *)(long)attr->addr;
+		unsigned long type = (unsigned long)attr->attr;
+
+		if (type != KVM_VGIC_ITS_ADDR_TYPE)
+			return -ENODEV;
+
+		if (copy_to_user(uaddr, &addr, sizeof(addr)))
+			return -EFAULT;
+		break;
+	}
+	case KVM_DEV_ARM_VGIC_GRP_ITS_REGS: {
+		u64 __user *uaddr = (u64 __user *)(long)attr->addr;
+		u64 reg;
+		int ret;
+
+		ret = vgic_its_attr_regs_access(dev, attr, &reg, false);
+		if (ret)
+			return ret;
+		return put_user(reg, uaddr);
+	}
+	default:
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static struct kvm_device_ops kvm_arm_vgic_its_ops = {
+	.name = "kvm-arm-vgic-its",
+	.create = vgic_its_create,
+	.destroy = vgic_its_destroy,
+	.set_attr = vgic_its_set_attr,
+	.get_attr = vgic_its_get_attr,
+	.has_attr = vgic_its_has_attr,
+};
+
+int kvm_vgic_register_its_device(void)
+{
+	return kvm_register_device_ops(&kvm_arm_vgic_its_ops,
+				       KVM_DEV_TYPE_ARM_VGIC_ITS);
+}
diff --git a/arch/arm64/kvm/vgic/vgic-kvm-device.c b/arch/arm64/kvm/vgic/vgic-kvm-device.c
new file mode 100644
index 000000000..212b73a71
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-kvm-device.c
@@ -0,0 +1,672 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VGIC: KVM DEVICE API
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+#include <linux/kvm_host.h>
+#include <kvm/arm_vgic.h>
+#include <linux/uaccess.h>
+#include <asm/kvm_mmu.h>
+#include <asm/cputype.h>
+#include "vgic.h"
+
+/* common helpers */
+
+int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,
+		       phys_addr_t addr, phys_addr_t alignment,
+		       phys_addr_t size)
+{
+	if (!IS_VGIC_ADDR_UNDEF(ioaddr))
+		return -EEXIST;
+
+	if (!IS_ALIGNED(addr, alignment) || !IS_ALIGNED(size, alignment))
+		return -EINVAL;
+
+	if (addr + size < addr)
+		return -EINVAL;
+
+	if (addr & ~kvm_phys_mask(kvm) || addr + size > kvm_phys_size(kvm))
+		return -E2BIG;
+
+	return 0;
+}
+
+static int vgic_check_type(struct kvm *kvm, int type_needed)
+{
+	if (kvm->arch.vgic.vgic_model != type_needed)
+		return -ENODEV;
+	else
+		return 0;
+}
+
+int kvm_set_legacy_vgic_v2_addr(struct kvm *kvm, struct kvm_arm_device_addr *dev_addr)
+{
+	struct vgic_dist *vgic = &kvm->arch.vgic;
+	int r;
+
+	mutex_lock(&kvm->arch.config_lock);
+	switch (FIELD_GET(KVM_ARM_DEVICE_TYPE_MASK, dev_addr->id)) {
+	case KVM_VGIC_V2_ADDR_TYPE_DIST:
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		if (!r)
+			r = vgic_check_iorange(kvm, vgic->vgic_dist_base, dev_addr->addr,
+					       SZ_4K, KVM_VGIC_V2_DIST_SIZE);
+		if (!r)
+			vgic->vgic_dist_base = dev_addr->addr;
+		break;
+	case KVM_VGIC_V2_ADDR_TYPE_CPU:
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		if (!r)
+			r = vgic_check_iorange(kvm, vgic->vgic_cpu_base, dev_addr->addr,
+					       SZ_4K, KVM_VGIC_V2_CPU_SIZE);
+		if (!r)
+			vgic->vgic_cpu_base = dev_addr->addr;
+		break;
+	default:
+		r = -ENODEV;
+	}
+
+	mutex_unlock(&kvm->arch.config_lock);
+
+	return r;
+}
+
+/**
+ * kvm_vgic_addr - set or get vgic VM base addresses
+ * @kvm:   pointer to the vm struct
+ * @attr:  pointer to the attribute being retrieved/updated
+ * @write: if true set the address in the VM address space, if false read the
+ *          address
+ *
+ * Set or get the vgic base addresses for the distributor and the virtual CPU
+ * interface in the VM physical address space.  These addresses are properties
+ * of the emulated core/SoC and therefore user space initially knows this
+ * information.
+ * Check them for sanity (alignment, double assignment). We can't check for
+ * overlapping regions in case of a virtual GICv3 here, since we don't know
+ * the number of VCPUs yet, so we defer this check to map_resources().
+ */
+static int kvm_vgic_addr(struct kvm *kvm, struct kvm_device_attr *attr, bool write)
+{
+	u64 __user *uaddr = (u64 __user *)attr->addr;
+	struct vgic_dist *vgic = &kvm->arch.vgic;
+	phys_addr_t *addr_ptr, alignment, size;
+	u64 undef_value = VGIC_ADDR_UNDEF;
+	u64 addr;
+	int r;
+
+	/* Reading a redistributor region addr implies getting the index */
+	if (write || attr->attr == KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION)
+		if (get_user(addr, uaddr))
+			return -EFAULT;
+
+	/*
+	 * Since we can't hold config_lock while registering the redistributor
+	 * iodevs, take the slots_lock immediately.
+	 */
+	mutex_lock(&kvm->slots_lock);
+	switch (attr->attr) {
+	case KVM_VGIC_V2_ADDR_TYPE_DIST:
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		addr_ptr = &vgic->vgic_dist_base;
+		alignment = SZ_4K;
+		size = KVM_VGIC_V2_DIST_SIZE;
+		break;
+	case KVM_VGIC_V2_ADDR_TYPE_CPU:
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		addr_ptr = &vgic->vgic_cpu_base;
+		alignment = SZ_4K;
+		size = KVM_VGIC_V2_CPU_SIZE;
+		break;
+	case KVM_VGIC_V3_ADDR_TYPE_DIST:
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V3);
+		addr_ptr = &vgic->vgic_dist_base;
+		alignment = SZ_64K;
+		size = KVM_VGIC_V3_DIST_SIZE;
+		break;
+	case KVM_VGIC_V3_ADDR_TYPE_REDIST: {
+		struct vgic_redist_region *rdreg;
+
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V3);
+		if (r)
+			break;
+		if (write) {
+			r = vgic_v3_set_redist_base(kvm, 0, addr, 0);
+			goto out;
+		}
+		rdreg = list_first_entry_or_null(&vgic->rd_regions,
+						 struct vgic_redist_region, list);
+		if (!rdreg)
+			addr_ptr = &undef_value;
+		else
+			addr_ptr = &rdreg->base;
+		break;
+	}
+	case KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION:
+	{
+		struct vgic_redist_region *rdreg;
+		u8 index;
+
+		r = vgic_check_type(kvm, KVM_DEV_TYPE_ARM_VGIC_V3);
+		if (r)
+			break;
+
+		index = addr & KVM_VGIC_V3_RDIST_INDEX_MASK;
+
+		if (write) {
+			gpa_t base = addr & KVM_VGIC_V3_RDIST_BASE_MASK;
+			u32 count = FIELD_GET(KVM_VGIC_V3_RDIST_COUNT_MASK, addr);
+			u8 flags = FIELD_GET(KVM_VGIC_V3_RDIST_FLAGS_MASK, addr);
+
+			if (!count || flags)
+				r = -EINVAL;
+			else
+				r = vgic_v3_set_redist_base(kvm, index,
+							    base, count);
+			goto out;
+		}
+
+		rdreg = vgic_v3_rdist_region_from_index(kvm, index);
+		if (!rdreg) {
+			r = -ENOENT;
+			goto out;
+		}
+
+		addr = index;
+		addr |= rdreg->base;
+		addr |= (u64)rdreg->count << KVM_VGIC_V3_RDIST_COUNT_SHIFT;
+		goto out;
+	}
+	default:
+		r = -ENODEV;
+	}
+
+	if (r)
+		goto out;
+
+	mutex_lock(&kvm->arch.config_lock);
+	if (write) {
+		r = vgic_check_iorange(kvm, *addr_ptr, addr, alignment, size);
+		if (!r)
+			*addr_ptr = addr;
+	} else {
+		addr = *addr_ptr;
+	}
+	mutex_unlock(&kvm->arch.config_lock);
+
+out:
+	mutex_unlock(&kvm->slots_lock);
+
+	if (!r && !write)
+		r =  put_user(addr, uaddr);
+
+	return r;
+}
+
+static int vgic_set_common_attr(struct kvm_device *dev,
+				struct kvm_device_attr *attr)
+{
+	int r;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR:
+		r = kvm_vgic_addr(dev->kvm, attr, true);
+		return (r == -ENODEV) ? -ENXIO : r;
+	case KVM_DEV_ARM_VGIC_GRP_NR_IRQS: {
+		u32 __user *uaddr = (u32 __user *)(long)attr->addr;
+		u32 val;
+		int ret = 0;
+
+		if (get_user(val, uaddr))
+			return -EFAULT;
+
+		/*
+		 * We require:
+		 * - at least 32 SPIs on top of the 16 SGIs and 16 PPIs
+		 * - at most 1024 interrupts
+		 * - a multiple of 32 interrupts
+		 */
+		if (val < (VGIC_NR_PRIVATE_IRQS + 32) ||
+		    val > VGIC_MAX_RESERVED ||
+		    (val & 31))
+			return -EINVAL;
+
+		mutex_lock(&dev->kvm->arch.config_lock);
+
+		if (vgic_ready(dev->kvm) || dev->kvm->arch.vgic.nr_spis)
+			ret = -EBUSY;
+		else
+			dev->kvm->arch.vgic.nr_spis =
+				val - VGIC_NR_PRIVATE_IRQS;
+
+		mutex_unlock(&dev->kvm->arch.config_lock);
+
+		return ret;
+	}
+	case KVM_DEV_ARM_VGIC_GRP_CTRL: {
+		switch (attr->attr) {
+		case KVM_DEV_ARM_VGIC_CTRL_INIT:
+			mutex_lock(&dev->kvm->arch.config_lock);
+			r = vgic_init(dev->kvm);
+			mutex_unlock(&dev->kvm->arch.config_lock);
+			return r;
+		case KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES:
+			/*
+			 * OK, this one isn't common at all, but we
+			 * want to handle all control group attributes
+			 * in a single place.
+			 */
+			if (vgic_check_type(dev->kvm, KVM_DEV_TYPE_ARM_VGIC_V3))
+				return -ENXIO;
+			mutex_lock(&dev->kvm->lock);
+
+			if (!lock_all_vcpus(dev->kvm)) {
+				mutex_unlock(&dev->kvm->lock);
+				return -EBUSY;
+			}
+
+			mutex_lock(&dev->kvm->arch.config_lock);
+			r = vgic_v3_save_pending_tables(dev->kvm);
+			mutex_unlock(&dev->kvm->arch.config_lock);
+			unlock_all_vcpus(dev->kvm);
+			mutex_unlock(&dev->kvm->lock);
+			return r;
+		}
+		break;
+	}
+	}
+
+	return -ENXIO;
+}
+
+static int vgic_get_common_attr(struct kvm_device *dev,
+				struct kvm_device_attr *attr)
+{
+	int r = -ENXIO;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR:
+		r = kvm_vgic_addr(dev->kvm, attr, false);
+		return (r == -ENODEV) ? -ENXIO : r;
+	case KVM_DEV_ARM_VGIC_GRP_NR_IRQS: {
+		u32 __user *uaddr = (u32 __user *)(long)attr->addr;
+
+		r = put_user(dev->kvm->arch.vgic.nr_spis +
+			     VGIC_NR_PRIVATE_IRQS, uaddr);
+		break;
+	}
+	}
+
+	return r;
+}
+
+static int vgic_create(struct kvm_device *dev, u32 type)
+{
+	return kvm_vgic_create(dev->kvm, type);
+}
+
+static void vgic_destroy(struct kvm_device *dev)
+{
+	kfree(dev);
+}
+
+int kvm_register_vgic_device(unsigned long type)
+{
+	int ret = -ENODEV;
+
+	switch (type) {
+	case KVM_DEV_TYPE_ARM_VGIC_V2:
+		ret = kvm_register_device_ops(&kvm_arm_vgic_v2_ops,
+					      KVM_DEV_TYPE_ARM_VGIC_V2);
+		break;
+	case KVM_DEV_TYPE_ARM_VGIC_V3:
+		ret = kvm_register_device_ops(&kvm_arm_vgic_v3_ops,
+					      KVM_DEV_TYPE_ARM_VGIC_V3);
+
+		if (ret)
+			break;
+		ret = kvm_vgic_register_its_device();
+		break;
+	}
+
+	return ret;
+}
+
+int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
+		       struct vgic_reg_attr *reg_attr)
+{
+	int cpuid;
+
+	cpuid = (attr->attr & KVM_DEV_ARM_VGIC_CPUID_MASK) >>
+		 KVM_DEV_ARM_VGIC_CPUID_SHIFT;
+
+	if (cpuid >= atomic_read(&dev->kvm->online_vcpus))
+		return -EINVAL;
+
+	reg_attr->vcpu = kvm_get_vcpu(dev->kvm, cpuid);
+	reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
+
+	return 0;
+}
+
+/**
+ * vgic_v2_attr_regs_access - allows user space to access VGIC v2 state
+ *
+ * @dev:      kvm device handle
+ * @attr:     kvm device attribute
+ * @is_write: true if userspace is writing a register
+ */
+static int vgic_v2_attr_regs_access(struct kvm_device *dev,
+				    struct kvm_device_attr *attr,
+				    bool is_write)
+{
+	u32 __user *uaddr = (u32 __user *)(unsigned long)attr->addr;
+	struct vgic_reg_attr reg_attr;
+	gpa_t addr;
+	struct kvm_vcpu *vcpu;
+	int ret;
+	u32 val;
+
+	ret = vgic_v2_parse_attr(dev, attr, &reg_attr);
+	if (ret)
+		return ret;
+
+	vcpu = reg_attr.vcpu;
+	addr = reg_attr.addr;
+
+	if (is_write)
+		if (get_user(val, uaddr))
+			return -EFAULT;
+
+	mutex_lock(&dev->kvm->lock);
+
+	if (!lock_all_vcpus(dev->kvm)) {
+		mutex_unlock(&dev->kvm->lock);
+		return -EBUSY;
+	}
+
+	mutex_lock(&dev->kvm->arch.config_lock);
+
+	ret = vgic_init(dev->kvm);
+	if (ret)
+		goto out;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
+		ret = vgic_v2_cpuif_uaccess(vcpu, is_write, addr, &val);
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+		ret = vgic_v2_dist_uaccess(vcpu, is_write, addr, &val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	mutex_unlock(&dev->kvm->arch.config_lock);
+	unlock_all_vcpus(dev->kvm);
+	mutex_unlock(&dev->kvm->lock);
+
+	if (!ret && !is_write)
+		ret = put_user(val, uaddr);
+
+	return ret;
+}
+
+static int vgic_v2_set_attr(struct kvm_device *dev,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
+		return vgic_v2_attr_regs_access(dev, attr, true);
+	default:
+		return vgic_set_common_attr(dev, attr);
+	}
+}
+
+static int vgic_v2_get_attr(struct kvm_device *dev,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
+		return vgic_v2_attr_regs_access(dev, attr, false);
+	default:
+		return vgic_get_common_attr(dev, attr);
+	}
+}
+
+static int vgic_v2_has_attr(struct kvm_device *dev,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR:
+		switch (attr->attr) {
+		case KVM_VGIC_V2_ADDR_TYPE_DIST:
+		case KVM_VGIC_V2_ADDR_TYPE_CPU:
+			return 0;
+		}
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
+		return vgic_v2_has_attr_regs(dev, attr);
+	case KVM_DEV_ARM_VGIC_GRP_NR_IRQS:
+		return 0;
+	case KVM_DEV_ARM_VGIC_GRP_CTRL:
+		switch (attr->attr) {
+		case KVM_DEV_ARM_VGIC_CTRL_INIT:
+			return 0;
+		}
+	}
+	return -ENXIO;
+}
+
+struct kvm_device_ops kvm_arm_vgic_v2_ops = {
+	.name = "kvm-arm-vgic-v2",
+	.create = vgic_create,
+	.destroy = vgic_destroy,
+	.set_attr = vgic_v2_set_attr,
+	.get_attr = vgic_v2_get_attr,
+	.has_attr = vgic_v2_has_attr,
+};
+
+int vgic_v3_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
+		       struct vgic_reg_attr *reg_attr)
+{
+	unsigned long vgic_mpidr, mpidr_reg;
+
+	/*
+	 * For KVM_DEV_ARM_VGIC_GRP_DIST_REGS group,
+	 * attr might not hold MPIDR. Hence assume vcpu0.
+	 */
+	if (attr->group != KVM_DEV_ARM_VGIC_GRP_DIST_REGS) {
+		vgic_mpidr = (attr->attr & KVM_DEV_ARM_VGIC_V3_MPIDR_MASK) >>
+			      KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT;
+
+		mpidr_reg = VGIC_TO_MPIDR(vgic_mpidr);
+		reg_attr->vcpu = kvm_mpidr_to_vcpu(dev->kvm, mpidr_reg);
+	} else {
+		reg_attr->vcpu = kvm_get_vcpu(dev->kvm, 0);
+	}
+
+	if (!reg_attr->vcpu)
+		return -EINVAL;
+
+	reg_attr->addr = attr->attr & KVM_DEV_ARM_VGIC_OFFSET_MASK;
+
+	return 0;
+}
+
+/*
+ * vgic_v3_attr_regs_access - allows user space to access VGIC v3 state
+ *
+ * @dev:      kvm device handle
+ * @attr:     kvm device attribute
+ * @is_write: true if userspace is writing a register
+ */
+static int vgic_v3_attr_regs_access(struct kvm_device *dev,
+				    struct kvm_device_attr *attr,
+				    bool is_write)
+{
+	struct vgic_reg_attr reg_attr;
+	gpa_t addr;
+	struct kvm_vcpu *vcpu;
+	bool uaccess;
+	u32 val;
+	int ret;
+
+	ret = vgic_v3_parse_attr(dev, attr, &reg_attr);
+	if (ret)
+		return ret;
+
+	vcpu = reg_attr.vcpu;
+	addr = reg_attr.addr;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
+		/* Sysregs uaccess is performed by the sysreg handling code */
+		uaccess = false;
+		break;
+	default:
+		uaccess = true;
+	}
+
+	if (uaccess && is_write) {
+		u32 __user *uaddr = (u32 __user *)(unsigned long)attr->addr;
+		if (get_user(val, uaddr))
+			return -EFAULT;
+	}
+
+	mutex_lock(&dev->kvm->lock);
+
+	if (!lock_all_vcpus(dev->kvm)) {
+		mutex_unlock(&dev->kvm->lock);
+		return -EBUSY;
+	}
+
+	mutex_lock(&dev->kvm->arch.config_lock);
+
+	if (unlikely(!vgic_initialized(dev->kvm))) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+		ret = vgic_v3_dist_uaccess(vcpu, is_write, addr, &val);
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_REDIST_REGS:
+		ret = vgic_v3_redist_uaccess(vcpu, is_write, addr, &val);
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
+		ret = vgic_v3_cpu_sysregs_uaccess(vcpu, attr, is_write);
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO: {
+		unsigned int info, intid;
+
+		info = (attr->attr & KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK) >>
+			KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT;
+		if (info == VGIC_LEVEL_INFO_LINE_LEVEL) {
+			intid = attr->attr &
+				KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK;
+			ret = vgic_v3_line_level_info_uaccess(vcpu, is_write,
+							      intid, &val);
+		} else {
+			ret = -EINVAL;
+		}
+		break;
+	}
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+out:
+	mutex_unlock(&dev->kvm->arch.config_lock);
+	unlock_all_vcpus(dev->kvm);
+	mutex_unlock(&dev->kvm->lock);
+
+	if (!ret && uaccess && !is_write) {
+		u32 __user *uaddr = (u32 __user *)(unsigned long)attr->addr;
+		ret = put_user(val, uaddr);
+	}
+
+	return ret;
+}
+
+static int vgic_v3_set_attr(struct kvm_device *dev,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_REDIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
+	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO:
+		return vgic_v3_attr_regs_access(dev, attr, true);
+	default:
+		return vgic_set_common_attr(dev, attr);
+	}
+}
+
+static int vgic_v3_get_attr(struct kvm_device *dev,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_REDIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
+	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO:
+		return vgic_v3_attr_regs_access(dev, attr, false);
+	default:
+		return vgic_get_common_attr(dev, attr);
+	}
+}
+
+static int vgic_v3_has_attr(struct kvm_device *dev,
+			    struct kvm_device_attr *attr)
+{
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_ADDR:
+		switch (attr->attr) {
+		case KVM_VGIC_V3_ADDR_TYPE_DIST:
+		case KVM_VGIC_V3_ADDR_TYPE_REDIST:
+		case KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION:
+			return 0;
+		}
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_REDIST_REGS:
+	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
+		return vgic_v3_has_attr_regs(dev, attr);
+	case KVM_DEV_ARM_VGIC_GRP_NR_IRQS:
+		return 0;
+	case KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO: {
+		if (((attr->attr & KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK) >>
+		      KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT) ==
+		      VGIC_LEVEL_INFO_LINE_LEVEL)
+			return 0;
+		break;
+	}
+	case KVM_DEV_ARM_VGIC_GRP_CTRL:
+		switch (attr->attr) {
+		case KVM_DEV_ARM_VGIC_CTRL_INIT:
+			return 0;
+		case KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES:
+			return 0;
+		}
+	}
+	return -ENXIO;
+}
+
+struct kvm_device_ops kvm_arm_vgic_v3_ops = {
+	.name = "kvm-arm-vgic-v3",
+	.create = vgic_create,
+	.destroy = vgic_destroy,
+	.set_attr = vgic_v3_set_attr,
+	.get_attr = vgic_v3_get_attr,
+	.has_attr = vgic_v3_has_attr,
+};
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v2.c b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
new file mode 100644
index 000000000..e070cda86
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VGICv2 MMIO handling functions
+ */
+
+#include <linux/irqchip/arm-gic.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/nospec.h>
+
+#include <kvm/iodev.h>
+#include <kvm/arm_vgic.h>
+
+#include "vgic.h"
+#include "vgic-mmio.h"
+
+/*
+ * The Revision field in the IIDR have the following meanings:
+ *
+ * Revision 1: Report GICv2 interrupts as group 0 instead of group 1
+ * Revision 2: Interrupt groups are guest-configurable and signaled using
+ * 	       their configured groups.
+ */
+
+static unsigned long vgic_mmio_read_v2_misc(struct kvm_vcpu *vcpu,
+					    gpa_t addr, unsigned int len)
+{
+	struct vgic_dist *vgic = &vcpu->kvm->arch.vgic;
+	u32 value;
+
+	switch (addr & 0x0c) {
+	case GIC_DIST_CTRL:
+		value = vgic->enabled ? GICD_ENABLE : 0;
+		break;
+	case GIC_DIST_CTR:
+		value = vgic->nr_spis + VGIC_NR_PRIVATE_IRQS;
+		value = (value >> 5) - 1;
+		value |= (atomic_read(&vcpu->kvm->online_vcpus) - 1) << 5;
+		break;
+	case GIC_DIST_IIDR:
+		value = (PRODUCT_ID_KVM << GICD_IIDR_PRODUCT_ID_SHIFT) |
+			(vgic->implementation_rev << GICD_IIDR_REVISION_SHIFT) |
+			(IMPLEMENTER_ARM << GICD_IIDR_IMPLEMENTER_SHIFT);
+		break;
+	default:
+		return 0;
+	}
+
+	return value;
+}
+
+static void vgic_mmio_write_v2_misc(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    unsigned long val)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	bool was_enabled = dist->enabled;
+
+	switch (addr & 0x0c) {
+	case GIC_DIST_CTRL:
+		dist->enabled = val & GICD_ENABLE;
+		if (!was_enabled && dist->enabled)
+			vgic_kick_vcpus(vcpu->kvm);
+		break;
+	case GIC_DIST_CTR:
+	case GIC_DIST_IIDR:
+		/* Nothing to do */
+		return;
+	}
+}
+
+static int vgic_mmio_uaccess_write_v2_misc(struct kvm_vcpu *vcpu,
+					   gpa_t addr, unsigned int len,
+					   unsigned long val)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	u32 reg;
+
+	switch (addr & 0x0c) {
+	case GIC_DIST_IIDR:
+		reg = vgic_mmio_read_v2_misc(vcpu, addr, len);
+		if ((reg ^ val) & ~GICD_IIDR_REVISION_MASK)
+			return -EINVAL;
+
+		/*
+		 * If we observe a write to GICD_IIDR we know that userspace
+		 * has been updated and has had a chance to cope with older
+		 * kernels (VGICv2 IIDR.Revision == 0) incorrectly reporting
+		 * interrupts as group 1, and therefore we now allow groups to
+		 * be user writable.  Doing this by default would break
+		 * migration from old kernels to new kernels with legacy
+		 * userspace.
+		 */
+		reg = FIELD_GET(GICD_IIDR_REVISION_MASK, reg);
+		switch (reg) {
+		case KVM_VGIC_IMP_REV_2:
+		case KVM_VGIC_IMP_REV_3:
+			vcpu->kvm->arch.vgic.v2_groups_user_writable = true;
+			dist->implementation_rev = reg;
+			return 0;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	vgic_mmio_write_v2_misc(vcpu, addr, len, val);
+	return 0;
+}
+
+static int vgic_mmio_uaccess_write_v2_group(struct kvm_vcpu *vcpu,
+					    gpa_t addr, unsigned int len,
+					    unsigned long val)
+{
+	if (vcpu->kvm->arch.vgic.v2_groups_user_writable)
+		vgic_mmio_write_group(vcpu, addr, len, val);
+
+	return 0;
+}
+
+static void vgic_mmio_write_sgir(struct kvm_vcpu *source_vcpu,
+				 gpa_t addr, unsigned int len,
+				 unsigned long val)
+{
+	int nr_vcpus = atomic_read(&source_vcpu->kvm->online_vcpus);
+	int intid = val & 0xf;
+	int targets = (val >> 16) & 0xff;
+	int mode = (val >> 24) & 0x03;
+	struct kvm_vcpu *vcpu;
+	unsigned long flags, c;
+
+	switch (mode) {
+	case 0x0:		/* as specified by targets */
+		break;
+	case 0x1:
+		targets = (1U << nr_vcpus) - 1;			/* all, ... */
+		targets &= ~(1U << source_vcpu->vcpu_id);	/* but self */
+		break;
+	case 0x2:		/* this very vCPU only */
+		targets = (1U << source_vcpu->vcpu_id);
+		break;
+	case 0x3:		/* reserved */
+		return;
+	}
+
+	kvm_for_each_vcpu(c, vcpu, source_vcpu->kvm) {
+		struct vgic_irq *irq;
+
+		if (!(targets & (1U << c)))
+			continue;
+
+		irq = vgic_get_irq(source_vcpu->kvm, vcpu, intid);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->pending_latch = true;
+		irq->source |= 1U << source_vcpu->vcpu_id;
+
+		vgic_queue_irq_unlock(source_vcpu->kvm, irq, flags);
+		vgic_put_irq(source_vcpu->kvm, irq);
+	}
+}
+
+static unsigned long vgic_mmio_read_target(struct kvm_vcpu *vcpu,
+					   gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 8);
+	int i;
+	u64 val = 0;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		val |= (u64)irq->targets << (i * 8);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return val;
+}
+
+static void vgic_mmio_write_target(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len,
+				   unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 8);
+	u8 cpu_mask = GENMASK(atomic_read(&vcpu->kvm->online_vcpus) - 1, 0);
+	int i;
+	unsigned long flags;
+
+	/* GICD_ITARGETSR[0-7] are read-only */
+	if (intid < VGIC_NR_PRIVATE_IRQS)
+		return;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, NULL, intid + i);
+		int target;
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		irq->targets = (val >> (i * 8)) & cpu_mask;
+		target = irq->targets ? __ffs(irq->targets) : 0;
+		irq->target_vcpu = kvm_get_vcpu(vcpu->kvm, target);
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+static unsigned long vgic_mmio_read_sgipend(struct kvm_vcpu *vcpu,
+					    gpa_t addr, unsigned int len)
+{
+	u32 intid = addr & 0x0f;
+	int i;
+	u64 val = 0;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		val |= (u64)irq->source << (i * 8);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+	return val;
+}
+
+static void vgic_mmio_write_sgipendc(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	u32 intid = addr & 0x0f;
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		irq->source &= ~((val >> (i * 8)) & 0xff);
+		if (!irq->source)
+			irq->pending_latch = false;
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+static void vgic_mmio_write_sgipends(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	u32 intid = addr & 0x0f;
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		irq->source |= (val >> (i * 8)) & 0xff;
+
+		if (irq->source) {
+			irq->pending_latch = true;
+			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		} else {
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		}
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+#define GICC_ARCH_VERSION_V2	0x2
+
+/* These are for userland accesses only, there is no guest-facing emulation. */
+static unsigned long vgic_mmio_read_vcpuif(struct kvm_vcpu *vcpu,
+					   gpa_t addr, unsigned int len)
+{
+	struct vgic_vmcr vmcr;
+	u32 val;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	switch (addr & 0xff) {
+	case GIC_CPU_CTRL:
+		val = vmcr.grpen0 << GIC_CPU_CTRL_EnableGrp0_SHIFT;
+		val |= vmcr.grpen1 << GIC_CPU_CTRL_EnableGrp1_SHIFT;
+		val |= vmcr.ackctl << GIC_CPU_CTRL_AckCtl_SHIFT;
+		val |= vmcr.fiqen << GIC_CPU_CTRL_FIQEn_SHIFT;
+		val |= vmcr.cbpr << GIC_CPU_CTRL_CBPR_SHIFT;
+		val |= vmcr.eoim << GIC_CPU_CTRL_EOImodeNS_SHIFT;
+
+		break;
+	case GIC_CPU_PRIMASK:
+		/*
+		 * Our KVM_DEV_TYPE_ARM_VGIC_V2 device ABI exports the
+		 * PMR field as GICH_VMCR.VMPriMask rather than
+		 * GICC_PMR.Priority, so we expose the upper five bits of
+		 * priority mask to userspace using the lower bits in the
+		 * unsigned long.
+		 */
+		val = (vmcr.pmr & GICV_PMR_PRIORITY_MASK) >>
+			GICV_PMR_PRIORITY_SHIFT;
+		break;
+	case GIC_CPU_BINPOINT:
+		val = vmcr.bpr;
+		break;
+	case GIC_CPU_ALIAS_BINPOINT:
+		val = vmcr.abpr;
+		break;
+	case GIC_CPU_IDENT:
+		val = ((PRODUCT_ID_KVM << 20) |
+		       (GICC_ARCH_VERSION_V2 << 16) |
+		       IMPLEMENTER_ARM);
+		break;
+	default:
+		return 0;
+	}
+
+	return val;
+}
+
+static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len,
+				   unsigned long val)
+{
+	struct vgic_vmcr vmcr;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	switch (addr & 0xff) {
+	case GIC_CPU_CTRL:
+		vmcr.grpen0 = !!(val & GIC_CPU_CTRL_EnableGrp0);
+		vmcr.grpen1 = !!(val & GIC_CPU_CTRL_EnableGrp1);
+		vmcr.ackctl = !!(val & GIC_CPU_CTRL_AckCtl);
+		vmcr.fiqen = !!(val & GIC_CPU_CTRL_FIQEn);
+		vmcr.cbpr = !!(val & GIC_CPU_CTRL_CBPR);
+		vmcr.eoim = !!(val & GIC_CPU_CTRL_EOImodeNS);
+
+		break;
+	case GIC_CPU_PRIMASK:
+		/*
+		 * Our KVM_DEV_TYPE_ARM_VGIC_V2 device ABI exports the
+		 * PMR field as GICH_VMCR.VMPriMask rather than
+		 * GICC_PMR.Priority, so we expose the upper five bits of
+		 * priority mask to userspace using the lower bits in the
+		 * unsigned long.
+		 */
+		vmcr.pmr = (val << GICV_PMR_PRIORITY_SHIFT) &
+			GICV_PMR_PRIORITY_MASK;
+		break;
+	case GIC_CPU_BINPOINT:
+		vmcr.bpr = val;
+		break;
+	case GIC_CPU_ALIAS_BINPOINT:
+		vmcr.abpr = val;
+		break;
+	}
+
+	vgic_set_vmcr(vcpu, &vmcr);
+}
+
+static unsigned long vgic_mmio_read_apr(struct kvm_vcpu *vcpu,
+					gpa_t addr, unsigned int len)
+{
+	int n; /* which APRn is this */
+
+	n = (addr >> 2) & 0x3;
+
+	if (kvm_vgic_global_state.type == VGIC_V2) {
+		/* GICv2 hardware systems support max. 32 groups */
+		if (n != 0)
+			return 0;
+		return vcpu->arch.vgic_cpu.vgic_v2.vgic_apr;
+	} else {
+		struct vgic_v3_cpu_if *vgicv3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
+		if (n > vgic_v3_max_apr_idx(vcpu))
+			return 0;
+
+		n = array_index_nospec(n, 4);
+
+		/* GICv3 only uses ICH_AP1Rn for memory mapped (GICv2) guests */
+		return vgicv3->vgic_ap1r[n];
+	}
+}
+
+static void vgic_mmio_write_apr(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
+{
+	int n; /* which APRn is this */
+
+	n = (addr >> 2) & 0x3;
+
+	if (kvm_vgic_global_state.type == VGIC_V2) {
+		/* GICv2 hardware systems support max. 32 groups */
+		if (n != 0)
+			return;
+		vcpu->arch.vgic_cpu.vgic_v2.vgic_apr = val;
+	} else {
+		struct vgic_v3_cpu_if *vgicv3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
+		if (n > vgic_v3_max_apr_idx(vcpu))
+			return;
+
+		n = array_index_nospec(n, 4);
+
+		/* GICv3 only uses ICH_AP1Rn for memory mapped (GICv2) guests */
+		vgicv3->vgic_ap1r[n] = val;
+	}
+}
+
+static const struct vgic_register_region vgic_v2_dist_registers[] = {
+	REGISTER_DESC_WITH_LENGTH_UACCESS(GIC_DIST_CTRL,
+		vgic_mmio_read_v2_misc, vgic_mmio_write_v2_misc,
+		NULL, vgic_mmio_uaccess_write_v2_misc,
+		12, VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_IGROUP,
+		vgic_mmio_read_group, vgic_mmio_write_group,
+		NULL, vgic_mmio_uaccess_write_v2_group, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_SET,
+		vgic_mmio_read_enable, vgic_mmio_write_senable,
+		NULL, vgic_uaccess_write_senable, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ENABLE_CLEAR,
+		vgic_mmio_read_enable, vgic_mmio_write_cenable,
+		NULL, vgic_uaccess_write_cenable, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_SET,
+		vgic_mmio_read_pending, vgic_mmio_write_spending,
+		vgic_uaccess_read_pending, vgic_uaccess_write_spending, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PENDING_CLEAR,
+		vgic_mmio_read_pending, vgic_mmio_write_cpending,
+		vgic_uaccess_read_pending, vgic_uaccess_write_cpending, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_SET,
+		vgic_mmio_read_active, vgic_mmio_write_sactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_ACTIVE_CLEAR,
+		vgic_mmio_read_active, vgic_mmio_write_cactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_PRI,
+		vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL,
+		8, VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_TARGET,
+		vgic_mmio_read_target, vgic_mmio_write_target, NULL, NULL, 8,
+		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ(GIC_DIST_CONFIG,
+		vgic_mmio_read_config, vgic_mmio_write_config, NULL, NULL, 2,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_DIST_SOFTINT,
+		vgic_mmio_read_raz, vgic_mmio_write_sgir, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_DIST_SGI_PENDING_CLEAR,
+		vgic_mmio_read_sgipend, vgic_mmio_write_sgipendc, 16,
+		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_DIST_SGI_PENDING_SET,
+		vgic_mmio_read_sgipend, vgic_mmio_write_sgipends, 16,
+		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+};
+
+static const struct vgic_register_region vgic_v2_cpu_registers[] = {
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_CTRL,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_PRIMASK,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_BINPOINT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_ALIAS_BINPOINT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_ACTIVEPRIO,
+		vgic_mmio_read_apr, vgic_mmio_write_apr, 16,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GIC_CPU_IDENT,
+		vgic_mmio_read_vcpuif, vgic_mmio_write_vcpuif, 4,
+		VGIC_ACCESS_32bit),
+};
+
+unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev)
+{
+	dev->regions = vgic_v2_dist_registers;
+	dev->nr_regions = ARRAY_SIZE(vgic_v2_dist_registers);
+
+	kvm_iodevice_init(&dev->dev, &kvm_io_gic_ops);
+
+	return SZ_4K;
+}
+
+int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+	const struct vgic_register_region *region;
+	struct vgic_io_device iodev;
+	struct vgic_reg_attr reg_attr;
+	struct kvm_vcpu *vcpu;
+	gpa_t addr;
+	int ret;
+
+	ret = vgic_v2_parse_attr(dev, attr, &reg_attr);
+	if (ret)
+		return ret;
+
+	vcpu = reg_attr.vcpu;
+	addr = reg_attr.addr;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+		iodev.regions = vgic_v2_dist_registers;
+		iodev.nr_regions = ARRAY_SIZE(vgic_v2_dist_registers);
+		iodev.base_addr = 0;
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_CPU_REGS:
+		iodev.regions = vgic_v2_cpu_registers;
+		iodev.nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers);
+		iodev.base_addr = 0;
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	/* We only support aligned 32-bit accesses. */
+	if (addr & 3)
+		return -ENXIO;
+
+	region = vgic_get_mmio_region(vcpu, &iodev, addr, sizeof(u32));
+	if (!region)
+		return -ENXIO;
+
+	return 0;
+}
+
+int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			  int offset, u32 *val)
+{
+	struct vgic_io_device dev = {
+		.regions = vgic_v2_cpu_registers,
+		.nr_regions = ARRAY_SIZE(vgic_v2_cpu_registers),
+		.iodev_type = IODEV_CPUIF,
+	};
+
+	return vgic_uaccess(vcpu, &dev, is_write, offset, val);
+}
+
+int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			 int offset, u32 *val)
+{
+	struct vgic_io_device dev = {
+		.regions = vgic_v2_dist_registers,
+		.nr_regions = ARRAY_SIZE(vgic_v2_dist_registers),
+		.iodev_type = IODEV_DIST,
+	};
+
+	return vgic_uaccess(vcpu, &dev, is_write, offset, val);
+}
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
new file mode 100644
index 000000000..ae5a3a717
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -0,0 +1,1186 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VGICv3 MMIO handling functions
+ */
+
+#include <linux/bitfield.h>
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/interrupt.h>
+#include <kvm/iodev.h>
+#include <kvm/arm_vgic.h>
+
+#include <asm/kvm_emulate.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_mmu.h>
+
+#include "vgic.h"
+#include "vgic-mmio.h"
+
+/* extract @num bytes at @offset bytes offset in data */
+unsigned long extract_bytes(u64 data, unsigned int offset,
+			    unsigned int num)
+{
+	return (data >> (offset * 8)) & GENMASK_ULL(num * 8 - 1, 0);
+}
+
+/* allows updates of any half of a 64-bit register (or the whole thing) */
+u64 update_64bit_reg(u64 reg, unsigned int offset, unsigned int len,
+		     unsigned long val)
+{
+	int lower = (offset & 4) * 8;
+	int upper = lower + 8 * len - 1;
+
+	reg &= ~GENMASK_ULL(upper, lower);
+	val &= GENMASK_ULL(len * 8 - 1, 0);
+
+	return reg | ((u64)val << lower);
+}
+
+bool vgic_has_its(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+
+	if (dist->vgic_model != KVM_DEV_TYPE_ARM_VGIC_V3)
+		return false;
+
+	return dist->has_its;
+}
+
+bool vgic_supports_direct_msis(struct kvm *kvm)
+{
+	return (kvm_vgic_global_state.has_gicv4_1 ||
+		(kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm)));
+}
+
+/*
+ * The Revision field in the IIDR have the following meanings:
+ *
+ * Revision 2: Interrupt groups are guest-configurable and signaled using
+ * 	       their configured groups.
+ */
+
+static unsigned long vgic_mmio_read_v3_misc(struct kvm_vcpu *vcpu,
+					    gpa_t addr, unsigned int len)
+{
+	struct vgic_dist *vgic = &vcpu->kvm->arch.vgic;
+	u32 value = 0;
+
+	switch (addr & 0x0c) {
+	case GICD_CTLR:
+		if (vgic->enabled)
+			value |= GICD_CTLR_ENABLE_SS_G1;
+		value |= GICD_CTLR_ARE_NS | GICD_CTLR_DS;
+		if (vgic->nassgireq)
+			value |= GICD_CTLR_nASSGIreq;
+		break;
+	case GICD_TYPER:
+		value = vgic->nr_spis + VGIC_NR_PRIVATE_IRQS;
+		value = (value >> 5) - 1;
+		if (vgic_has_its(vcpu->kvm)) {
+			value |= (INTERRUPT_ID_BITS_ITS - 1) << 19;
+			value |= GICD_TYPER_LPIS;
+		} else {
+			value |= (INTERRUPT_ID_BITS_SPIS - 1) << 19;
+		}
+		break;
+	case GICD_TYPER2:
+		if (kvm_vgic_global_state.has_gicv4_1 && gic_cpuif_has_vsgi())
+			value = GICD_TYPER2_nASSGIcap;
+		break;
+	case GICD_IIDR:
+		value = (PRODUCT_ID_KVM << GICD_IIDR_PRODUCT_ID_SHIFT) |
+			(vgic->implementation_rev << GICD_IIDR_REVISION_SHIFT) |
+			(IMPLEMENTER_ARM << GICD_IIDR_IMPLEMENTER_SHIFT);
+		break;
+	default:
+		return 0;
+	}
+
+	return value;
+}
+
+static void vgic_mmio_write_v3_misc(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    unsigned long val)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
+	switch (addr & 0x0c) {
+	case GICD_CTLR: {
+		bool was_enabled, is_hwsgi;
+
+		mutex_lock(&vcpu->kvm->arch.config_lock);
+
+		was_enabled = dist->enabled;
+		is_hwsgi = dist->nassgireq;
+
+		dist->enabled = val & GICD_CTLR_ENABLE_SS_G1;
+
+		/* Not a GICv4.1? No HW SGIs */
+		if (!kvm_vgic_global_state.has_gicv4_1 || !gic_cpuif_has_vsgi())
+			val &= ~GICD_CTLR_nASSGIreq;
+
+		/* Dist stays enabled? nASSGIreq is RO */
+		if (was_enabled && dist->enabled) {
+			val &= ~GICD_CTLR_nASSGIreq;
+			val |= FIELD_PREP(GICD_CTLR_nASSGIreq, is_hwsgi);
+		}
+
+		/* Switching HW SGIs? */
+		dist->nassgireq = val & GICD_CTLR_nASSGIreq;
+		if (is_hwsgi != dist->nassgireq)
+			vgic_v4_configure_vsgis(vcpu->kvm);
+
+		if (kvm_vgic_global_state.has_gicv4_1 &&
+		    was_enabled != dist->enabled)
+			kvm_make_all_cpus_request(vcpu->kvm, KVM_REQ_RELOAD_GICv4);
+		else if (!was_enabled && dist->enabled)
+			vgic_kick_vcpus(vcpu->kvm);
+
+		mutex_unlock(&vcpu->kvm->arch.config_lock);
+		break;
+	}
+	case GICD_TYPER:
+	case GICD_TYPER2:
+	case GICD_IIDR:
+		/* This is at best for documentation purposes... */
+		return;
+	}
+}
+
+static int vgic_mmio_uaccess_write_v3_misc(struct kvm_vcpu *vcpu,
+					   gpa_t addr, unsigned int len,
+					   unsigned long val)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	u32 reg;
+
+	switch (addr & 0x0c) {
+	case GICD_TYPER2:
+		if (val != vgic_mmio_read_v3_misc(vcpu, addr, len))
+			return -EINVAL;
+		return 0;
+	case GICD_IIDR:
+		reg = vgic_mmio_read_v3_misc(vcpu, addr, len);
+		if ((reg ^ val) & ~GICD_IIDR_REVISION_MASK)
+			return -EINVAL;
+
+		reg = FIELD_GET(GICD_IIDR_REVISION_MASK, reg);
+		switch (reg) {
+		case KVM_VGIC_IMP_REV_2:
+		case KVM_VGIC_IMP_REV_3:
+			dist->implementation_rev = reg;
+			return 0;
+		default:
+			return -EINVAL;
+		}
+	case GICD_CTLR:
+		/* Not a GICv4.1? No HW SGIs */
+		if (!kvm_vgic_global_state.has_gicv4_1)
+			val &= ~GICD_CTLR_nASSGIreq;
+
+		dist->enabled = val & GICD_CTLR_ENABLE_SS_G1;
+		dist->nassgireq = val & GICD_CTLR_nASSGIreq;
+		return 0;
+	}
+
+	vgic_mmio_write_v3_misc(vcpu, addr, len, val);
+	return 0;
+}
+
+static unsigned long vgic_mmio_read_irouter(struct kvm_vcpu *vcpu,
+					    gpa_t addr, unsigned int len)
+{
+	int intid = VGIC_ADDR_TO_INTID(addr, 64);
+	struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, NULL, intid);
+	unsigned long ret = 0;
+
+	if (!irq)
+		return 0;
+
+	/* The upper word is RAZ for us. */
+	if (!(addr & 4))
+		ret = extract_bytes(READ_ONCE(irq->mpidr), addr & 7, len);
+
+	vgic_put_irq(vcpu->kvm, irq);
+	return ret;
+}
+
+static void vgic_mmio_write_irouter(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    unsigned long val)
+{
+	int intid = VGIC_ADDR_TO_INTID(addr, 64);
+	struct vgic_irq *irq;
+	unsigned long flags;
+
+	/* The upper word is WI for us since we don't implement Aff3. */
+	if (addr & 4)
+		return;
+
+	irq = vgic_get_irq(vcpu->kvm, NULL, intid);
+
+	if (!irq)
+		return;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+	/* We only care about and preserve Aff0, Aff1 and Aff2. */
+	irq->mpidr = val & GENMASK(23, 0);
+	irq->target_vcpu = kvm_mpidr_to_vcpu(vcpu->kvm, irq->mpidr);
+
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	vgic_put_irq(vcpu->kvm, irq);
+}
+
+bool vgic_lpis_enabled(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+
+	return atomic_read(&vgic_cpu->ctlr) == GICR_CTLR_ENABLE_LPIS;
+}
+
+static unsigned long vgic_mmio_read_v3r_ctlr(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	unsigned long val;
+
+	val = atomic_read(&vgic_cpu->ctlr);
+	if (vgic_get_implementation_rev(vcpu) >= KVM_VGIC_IMP_REV_3)
+		val |= GICR_CTLR_IR | GICR_CTLR_CES;
+
+	return val;
+}
+
+static void vgic_mmio_write_v3r_ctlr(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	u32 ctlr;
+
+	if (!vgic_has_its(vcpu->kvm))
+		return;
+
+	if (!(val & GICR_CTLR_ENABLE_LPIS)) {
+		/*
+		 * Don't disable if RWP is set, as there already an
+		 * ongoing disable. Funky guest...
+		 */
+		ctlr = atomic_cmpxchg_acquire(&vgic_cpu->ctlr,
+					      GICR_CTLR_ENABLE_LPIS,
+					      GICR_CTLR_RWP);
+		if (ctlr != GICR_CTLR_ENABLE_LPIS)
+			return;
+
+		vgic_flush_pending_lpis(vcpu);
+		vgic_its_invalidate_cache(vcpu->kvm);
+		atomic_set_release(&vgic_cpu->ctlr, 0);
+	} else {
+		ctlr = atomic_cmpxchg_acquire(&vgic_cpu->ctlr, 0,
+					      GICR_CTLR_ENABLE_LPIS);
+		if (ctlr != 0)
+			return;
+
+		vgic_enable_lpis(vcpu);
+	}
+}
+
+static bool vgic_mmio_vcpu_rdist_is_last(struct kvm_vcpu *vcpu)
+{
+	struct vgic_dist *vgic = &vcpu->kvm->arch.vgic;
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_redist_region *iter, *rdreg = vgic_cpu->rdreg;
+
+	if (!rdreg)
+		return false;
+
+	if (vgic_cpu->rdreg_index < rdreg->free_index - 1) {
+		return false;
+	} else if (rdreg->count && vgic_cpu->rdreg_index == (rdreg->count - 1)) {
+		struct list_head *rd_regions = &vgic->rd_regions;
+		gpa_t end = rdreg->base + rdreg->count * KVM_VGIC_V3_REDIST_SIZE;
+
+		/*
+		 * the rdist is the last one of the redist region,
+		 * check whether there is no other contiguous rdist region
+		 */
+		list_for_each_entry(iter, rd_regions, list) {
+			if (iter->base == end && iter->free_index > 0)
+				return false;
+		}
+	}
+	return true;
+}
+
+static unsigned long vgic_mmio_read_v3r_typer(struct kvm_vcpu *vcpu,
+					      gpa_t addr, unsigned int len)
+{
+	unsigned long mpidr = kvm_vcpu_get_mpidr_aff(vcpu);
+	int target_vcpu_id = vcpu->vcpu_id;
+	u64 value;
+
+	value = (u64)(mpidr & GENMASK(23, 0)) << 32;
+	value |= ((target_vcpu_id & 0xffff) << 8);
+
+	if (vgic_has_its(vcpu->kvm))
+		value |= GICR_TYPER_PLPIS;
+
+	if (vgic_mmio_vcpu_rdist_is_last(vcpu))
+		value |= GICR_TYPER_LAST;
+
+	return extract_bytes(value, addr & 7, len);
+}
+
+static unsigned long vgic_mmio_read_v3r_iidr(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
+{
+	return (PRODUCT_ID_KVM << 24) | (IMPLEMENTER_ARM << 0);
+}
+
+static unsigned long vgic_mmio_read_v3_idregs(struct kvm_vcpu *vcpu,
+					      gpa_t addr, unsigned int len)
+{
+	switch (addr & 0xffff) {
+	case GICD_PIDR2:
+		/* report a GICv3 compliant implementation */
+		return 0x3b;
+	}
+
+	return 0;
+}
+
+static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu,
+					 gpa_t addr, unsigned int len,
+					 unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < len * 8; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		/*
+		 * pending_latch is set irrespective of irq type
+		 * (level or edge) to avoid dependency that VM should
+		 * restore irq config before pending info.
+		 */
+		irq->pending_latch = test_bit(i, &val);
+
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			irq_set_irqchip_state(irq->host_irq,
+					      IRQCHIP_STATE_PENDING,
+					      irq->pending_latch);
+			irq->pending_latch = false;
+		}
+
+		if (irq->pending_latch)
+			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		else
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+/* We want to avoid outer shareable. */
+u64 vgic_sanitise_shareability(u64 field)
+{
+	switch (field) {
+	case GIC_BASER_OuterShareable:
+		return GIC_BASER_InnerShareable;
+	default:
+		return field;
+	}
+}
+
+/* Avoid any inner non-cacheable mapping. */
+u64 vgic_sanitise_inner_cacheability(u64 field)
+{
+	switch (field) {
+	case GIC_BASER_CACHE_nCnB:
+	case GIC_BASER_CACHE_nC:
+		return GIC_BASER_CACHE_RaWb;
+	default:
+		return field;
+	}
+}
+
+/* Non-cacheable or same-as-inner are OK. */
+u64 vgic_sanitise_outer_cacheability(u64 field)
+{
+	switch (field) {
+	case GIC_BASER_CACHE_SameAsInner:
+	case GIC_BASER_CACHE_nC:
+		return field;
+	default:
+		return GIC_BASER_CACHE_SameAsInner;
+	}
+}
+
+u64 vgic_sanitise_field(u64 reg, u64 field_mask, int field_shift,
+			u64 (*sanitise_fn)(u64))
+{
+	u64 field = (reg & field_mask) >> field_shift;
+
+	field = sanitise_fn(field) << field_shift;
+	return (reg & ~field_mask) | field;
+}
+
+#define PROPBASER_RES0_MASK						\
+	(GENMASK_ULL(63, 59) | GENMASK_ULL(55, 52) | GENMASK_ULL(6, 5))
+#define PENDBASER_RES0_MASK						\
+	(BIT_ULL(63) | GENMASK_ULL(61, 59) | GENMASK_ULL(55, 52) |	\
+	 GENMASK_ULL(15, 12) | GENMASK_ULL(6, 0))
+
+static u64 vgic_sanitise_pendbaser(u64 reg)
+{
+	reg = vgic_sanitise_field(reg, GICR_PENDBASER_SHAREABILITY_MASK,
+				  GICR_PENDBASER_SHAREABILITY_SHIFT,
+				  vgic_sanitise_shareability);
+	reg = vgic_sanitise_field(reg, GICR_PENDBASER_INNER_CACHEABILITY_MASK,
+				  GICR_PENDBASER_INNER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_inner_cacheability);
+	reg = vgic_sanitise_field(reg, GICR_PENDBASER_OUTER_CACHEABILITY_MASK,
+				  GICR_PENDBASER_OUTER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_outer_cacheability);
+
+	reg &= ~PENDBASER_RES0_MASK;
+
+	return reg;
+}
+
+static u64 vgic_sanitise_propbaser(u64 reg)
+{
+	reg = vgic_sanitise_field(reg, GICR_PROPBASER_SHAREABILITY_MASK,
+				  GICR_PROPBASER_SHAREABILITY_SHIFT,
+				  vgic_sanitise_shareability);
+	reg = vgic_sanitise_field(reg, GICR_PROPBASER_INNER_CACHEABILITY_MASK,
+				  GICR_PROPBASER_INNER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_inner_cacheability);
+	reg = vgic_sanitise_field(reg, GICR_PROPBASER_OUTER_CACHEABILITY_MASK,
+				  GICR_PROPBASER_OUTER_CACHEABILITY_SHIFT,
+				  vgic_sanitise_outer_cacheability);
+
+	reg &= ~PROPBASER_RES0_MASK;
+	return reg;
+}
+
+static unsigned long vgic_mmio_read_propbase(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
+	return extract_bytes(dist->propbaser, addr & 7, len);
+}
+
+static void vgic_mmio_write_propbase(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+	u64 old_propbaser, propbaser;
+
+	/* Storing a value with LPIs already enabled is undefined */
+	if (vgic_lpis_enabled(vcpu))
+		return;
+
+	do {
+		old_propbaser = READ_ONCE(dist->propbaser);
+		propbaser = old_propbaser;
+		propbaser = update_64bit_reg(propbaser, addr & 4, len, val);
+		propbaser = vgic_sanitise_propbaser(propbaser);
+	} while (cmpxchg64(&dist->propbaser, old_propbaser,
+			   propbaser) != old_propbaser);
+}
+
+static unsigned long vgic_mmio_read_pendbase(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	u64 value = vgic_cpu->pendbaser;
+
+	value &= ~GICR_PENDBASER_PTZ;
+
+	return extract_bytes(value, addr & 7, len);
+}
+
+static void vgic_mmio_write_pendbase(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	u64 old_pendbaser, pendbaser;
+
+	/* Storing a value with LPIs already enabled is undefined */
+	if (vgic_lpis_enabled(vcpu))
+		return;
+
+	do {
+		old_pendbaser = READ_ONCE(vgic_cpu->pendbaser);
+		pendbaser = old_pendbaser;
+		pendbaser = update_64bit_reg(pendbaser, addr & 4, len, val);
+		pendbaser = vgic_sanitise_pendbaser(pendbaser);
+	} while (cmpxchg64(&vgic_cpu->pendbaser, old_pendbaser,
+			   pendbaser) != old_pendbaser);
+}
+
+static unsigned long vgic_mmio_read_sync(struct kvm_vcpu *vcpu,
+					 gpa_t addr, unsigned int len)
+{
+	return !!atomic_read(&vcpu->arch.vgic_cpu.syncr_busy);
+}
+
+static void vgic_set_rdist_busy(struct kvm_vcpu *vcpu, bool busy)
+{
+	if (busy) {
+		atomic_inc(&vcpu->arch.vgic_cpu.syncr_busy);
+		smp_mb__after_atomic();
+	} else {
+		smp_mb__before_atomic();
+		atomic_dec(&vcpu->arch.vgic_cpu.syncr_busy);
+	}
+}
+
+static void vgic_mmio_write_invlpi(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len,
+				   unsigned long val)
+{
+	struct vgic_irq *irq;
+
+	/*
+	 * If the guest wrote only to the upper 32bit part of the
+	 * register, drop the write on the floor, as it is only for
+	 * vPEs (which we don't support for obvious reasons).
+	 *
+	 * Also discard the access if LPIs are not enabled.
+	 */
+	if ((addr & 4) || !vgic_lpis_enabled(vcpu))
+		return;
+
+	vgic_set_rdist_busy(vcpu, true);
+
+	irq = vgic_get_irq(vcpu->kvm, NULL, lower_32_bits(val));
+	if (irq) {
+		vgic_its_inv_lpi(vcpu->kvm, irq);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	vgic_set_rdist_busy(vcpu, false);
+}
+
+static void vgic_mmio_write_invall(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len,
+				   unsigned long val)
+{
+	/* See vgic_mmio_write_invlpi() for the early return rationale */
+	if ((addr & 4) || !vgic_lpis_enabled(vcpu))
+		return;
+
+	vgic_set_rdist_busy(vcpu, true);
+	vgic_its_invall(vcpu);
+	vgic_set_rdist_busy(vcpu, false);
+}
+
+/*
+ * The GICv3 per-IRQ registers are split to control PPIs and SGIs in the
+ * redistributors, while SPIs are covered by registers in the distributor
+ * block. Trying to set private IRQs in this block gets ignored.
+ * We take some special care here to fix the calculation of the register
+ * offset.
+ */
+#define REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(off, rd, wr, ur, uw, bpi, acc) \
+	{								\
+		.reg_offset = off,					\
+		.bits_per_irq = bpi,					\
+		.len = (bpi * VGIC_NR_PRIVATE_IRQS) / 8,		\
+		.access_flags = acc,					\
+		.read = vgic_mmio_read_raz,				\
+		.write = vgic_mmio_write_wi,				\
+	}, {								\
+		.reg_offset = off + (bpi * VGIC_NR_PRIVATE_IRQS) / 8,	\
+		.bits_per_irq = bpi,					\
+		.len = (bpi * (1024 - VGIC_NR_PRIVATE_IRQS)) / 8,	\
+		.access_flags = acc,					\
+		.read = rd,						\
+		.write = wr,						\
+		.uaccess_read = ur,					\
+		.uaccess_write = uw,					\
+	}
+
+static const struct vgic_register_region vgic_v3_dist_registers[] = {
+	REGISTER_DESC_WITH_LENGTH_UACCESS(GICD_CTLR,
+		vgic_mmio_read_v3_misc, vgic_mmio_write_v3_misc,
+		NULL, vgic_mmio_uaccess_write_v3_misc,
+		16, VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICD_STATUSR,
+		vgic_mmio_read_rao, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IGROUPR,
+		vgic_mmio_read_group, vgic_mmio_write_group, NULL, NULL, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISENABLER,
+		vgic_mmio_read_enable, vgic_mmio_write_senable,
+		NULL, vgic_uaccess_write_senable, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICENABLER,
+		vgic_mmio_read_enable, vgic_mmio_write_cenable,
+	       NULL, vgic_uaccess_write_cenable, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISPENDR,
+		vgic_mmio_read_pending, vgic_mmio_write_spending,
+		vgic_uaccess_read_pending, vgic_v3_uaccess_write_pending, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICPENDR,
+		vgic_mmio_read_pending, vgic_mmio_write_cpending,
+		vgic_mmio_read_raz, vgic_mmio_uaccess_write_wi, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ISACTIVER,
+		vgic_mmio_read_active, vgic_mmio_write_sactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICACTIVER,
+		vgic_mmio_read_active, vgic_mmio_write_cactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive,
+		1, VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IPRIORITYR,
+		vgic_mmio_read_priority, vgic_mmio_write_priority, NULL, NULL,
+		8, VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ITARGETSR,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, NULL, NULL, 8,
+		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_ICFGR,
+		vgic_mmio_read_config, vgic_mmio_write_config, NULL, NULL, 2,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IGRPMODR,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, NULL, NULL, 1,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_BITS_PER_IRQ_SHARED(GICD_IROUTER,
+		vgic_mmio_read_irouter, vgic_mmio_write_irouter, NULL, NULL, 64,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICD_IDREGS,
+		vgic_mmio_read_v3_idregs, vgic_mmio_write_wi, 48,
+		VGIC_ACCESS_32bit),
+};
+
+static const struct vgic_register_region vgic_v3_rd_registers[] = {
+	/* RD_base registers */
+	REGISTER_DESC_WITH_LENGTH(GICR_CTLR,
+		vgic_mmio_read_v3r_ctlr, vgic_mmio_write_v3r_ctlr, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_STATUSR,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_IIDR,
+		vgic_mmio_read_v3r_iidr, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(GICR_TYPER,
+		vgic_mmio_read_v3r_typer, vgic_mmio_write_wi,
+		NULL, vgic_mmio_uaccess_write_wi, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_WAKER,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_PROPBASER,
+		vgic_mmio_read_propbase, vgic_mmio_write_propbase, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_PENDBASER,
+		vgic_mmio_read_pendbase, vgic_mmio_write_pendbase, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_INVLPIR,
+		vgic_mmio_read_raz, vgic_mmio_write_invlpi, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_INVALLR,
+		vgic_mmio_read_raz, vgic_mmio_write_invall, 8,
+		VGIC_ACCESS_64bit | VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_SYNCR,
+		vgic_mmio_read_sync, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(GICR_IDREGS,
+		vgic_mmio_read_v3_idregs, vgic_mmio_write_wi, 48,
+		VGIC_ACCESS_32bit),
+	/* SGI_base registers */
+	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IGROUPR0,
+		vgic_mmio_read_group, vgic_mmio_write_group, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISENABLER0,
+		vgic_mmio_read_enable, vgic_mmio_write_senable,
+		NULL, vgic_uaccess_write_senable, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICENABLER0,
+		vgic_mmio_read_enable, vgic_mmio_write_cenable,
+		NULL, vgic_uaccess_write_cenable, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISPENDR0,
+		vgic_mmio_read_pending, vgic_mmio_write_spending,
+		vgic_uaccess_read_pending, vgic_v3_uaccess_write_pending, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICPENDR0,
+		vgic_mmio_read_pending, vgic_mmio_write_cpending,
+		vgic_mmio_read_raz, vgic_mmio_uaccess_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ISACTIVER0,
+		vgic_mmio_read_active, vgic_mmio_write_sactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_sactive, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH_UACCESS(SZ_64K + GICR_ICACTIVER0,
+		vgic_mmio_read_active, vgic_mmio_write_cactive,
+		vgic_uaccess_read_active, vgic_mmio_uaccess_write_cactive, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IPRIORITYR0,
+		vgic_mmio_read_priority, vgic_mmio_write_priority, 32,
+		VGIC_ACCESS_32bit | VGIC_ACCESS_8bit),
+	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_ICFGR0,
+		vgic_mmio_read_config, vgic_mmio_write_config, 8,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_IGRPMODR0,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+	REGISTER_DESC_WITH_LENGTH(SZ_64K + GICR_NSACR,
+		vgic_mmio_read_raz, vgic_mmio_write_wi, 4,
+		VGIC_ACCESS_32bit),
+};
+
+unsigned int vgic_v3_init_dist_iodev(struct vgic_io_device *dev)
+{
+	dev->regions = vgic_v3_dist_registers;
+	dev->nr_regions = ARRAY_SIZE(vgic_v3_dist_registers);
+
+	kvm_iodevice_init(&dev->dev, &kvm_io_gic_ops);
+
+	return SZ_64K;
+}
+
+/**
+ * vgic_register_redist_iodev - register a single redist iodev
+ * @vcpu:    The VCPU to which the redistributor belongs
+ *
+ * Register a KVM iodev for this VCPU's redistributor using the address
+ * provided.
+ *
+ * Return 0 on success, -ERRNO otherwise.
+ */
+int vgic_register_redist_iodev(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct vgic_dist *vgic = &kvm->arch.vgic;
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_io_device *rd_dev = &vcpu->arch.vgic_cpu.rd_iodev;
+	struct vgic_redist_region *rdreg;
+	gpa_t rd_base;
+	int ret = 0;
+
+	lockdep_assert_held(&kvm->slots_lock);
+	mutex_lock(&kvm->arch.config_lock);
+
+	if (!IS_VGIC_ADDR_UNDEF(vgic_cpu->rd_iodev.base_addr))
+		goto out_unlock;
+
+	/*
+	 * We may be creating VCPUs before having set the base address for the
+	 * redistributor region, in which case we will come back to this
+	 * function for all VCPUs when the base address is set.  Just return
+	 * without doing any work for now.
+	 */
+	rdreg = vgic_v3_rdist_free_slot(&vgic->rd_regions);
+	if (!rdreg)
+		goto out_unlock;
+
+	if (!vgic_v3_check_base(kvm)) {
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	vgic_cpu->rdreg = rdreg;
+	vgic_cpu->rdreg_index = rdreg->free_index;
+
+	rd_base = rdreg->base + rdreg->free_index * KVM_VGIC_V3_REDIST_SIZE;
+
+	kvm_iodevice_init(&rd_dev->dev, &kvm_io_gic_ops);
+	rd_dev->base_addr = rd_base;
+	rd_dev->iodev_type = IODEV_REDIST;
+	rd_dev->regions = vgic_v3_rd_registers;
+	rd_dev->nr_regions = ARRAY_SIZE(vgic_v3_rd_registers);
+	rd_dev->redist_vcpu = vcpu;
+
+	mutex_unlock(&kvm->arch.config_lock);
+
+	ret = kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, rd_base,
+				      2 * SZ_64K, &rd_dev->dev);
+	if (ret)
+		return ret;
+
+	/* Protected by slots_lock */
+	rdreg->free_index++;
+	return 0;
+
+out_unlock:
+	mutex_unlock(&kvm->arch.config_lock);
+	return ret;
+}
+
+void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu)
+{
+	struct vgic_io_device *rd_dev = &vcpu->arch.vgic_cpu.rd_iodev;
+
+	kvm_io_bus_unregister_dev(vcpu->kvm, KVM_MMIO_BUS, &rd_dev->dev);
+}
+
+static int vgic_register_all_redist_iodevs(struct kvm *kvm)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long c;
+	int ret = 0;
+
+	kvm_for_each_vcpu(c, vcpu, kvm) {
+		ret = vgic_register_redist_iodev(vcpu);
+		if (ret)
+			break;
+	}
+
+	if (ret) {
+		/* The current c failed, so iterate over the previous ones. */
+		int i;
+
+		for (i = 0; i < c; i++) {
+			vcpu = kvm_get_vcpu(kvm, i);
+			vgic_unregister_redist_iodev(vcpu);
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * vgic_v3_alloc_redist_region - Allocate a new redistributor region
+ *
+ * Performs various checks before inserting the rdist region in the list.
+ * Those tests depend on whether the size of the rdist region is known
+ * (ie. count != 0). The list is sorted by rdist region index.
+ *
+ * @kvm: kvm handle
+ * @index: redist region index
+ * @base: base of the new rdist region
+ * @count: number of redistributors the region is made of (0 in the old style
+ * single region, whose size is induced from the number of vcpus)
+ *
+ * Return 0 on success, < 0 otherwise
+ */
+static int vgic_v3_alloc_redist_region(struct kvm *kvm, uint32_t index,
+				       gpa_t base, uint32_t count)
+{
+	struct vgic_dist *d = &kvm->arch.vgic;
+	struct vgic_redist_region *rdreg;
+	struct list_head *rd_regions = &d->rd_regions;
+	int nr_vcpus = atomic_read(&kvm->online_vcpus);
+	size_t size = count ? count * KVM_VGIC_V3_REDIST_SIZE
+			    : nr_vcpus * KVM_VGIC_V3_REDIST_SIZE;
+	int ret;
+
+	/* cross the end of memory ? */
+	if (base + size < base)
+		return -EINVAL;
+
+	if (list_empty(rd_regions)) {
+		if (index != 0)
+			return -EINVAL;
+	} else {
+		rdreg = list_last_entry(rd_regions,
+					struct vgic_redist_region, list);
+
+		/* Don't mix single region and discrete redist regions */
+		if (!count && rdreg->count)
+			return -EINVAL;
+
+		if (!count)
+			return -EEXIST;
+
+		if (index != rdreg->index + 1)
+			return -EINVAL;
+	}
+
+	/*
+	 * For legacy single-region redistributor regions (!count),
+	 * check that the redistributor region does not overlap with the
+	 * distributor's address space.
+	 */
+	if (!count && !IS_VGIC_ADDR_UNDEF(d->vgic_dist_base) &&
+		vgic_dist_overlap(kvm, base, size))
+		return -EINVAL;
+
+	/* collision with any other rdist region? */
+	if (vgic_v3_rdist_overlap(kvm, base, size))
+		return -EINVAL;
+
+	rdreg = kzalloc(sizeof(*rdreg), GFP_KERNEL_ACCOUNT);
+	if (!rdreg)
+		return -ENOMEM;
+
+	rdreg->base = VGIC_ADDR_UNDEF;
+
+	ret = vgic_check_iorange(kvm, rdreg->base, base, SZ_64K, size);
+	if (ret)
+		goto free;
+
+	rdreg->base = base;
+	rdreg->count = count;
+	rdreg->free_index = 0;
+	rdreg->index = index;
+
+	list_add_tail(&rdreg->list, rd_regions);
+	return 0;
+free:
+	kfree(rdreg);
+	return ret;
+}
+
+void vgic_v3_free_redist_region(struct vgic_redist_region *rdreg)
+{
+	list_del(&rdreg->list);
+	kfree(rdreg);
+}
+
+int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count)
+{
+	int ret;
+
+	mutex_lock(&kvm->arch.config_lock);
+	ret = vgic_v3_alloc_redist_region(kvm, index, addr, count);
+	mutex_unlock(&kvm->arch.config_lock);
+	if (ret)
+		return ret;
+
+	/*
+	 * Register iodevs for each existing VCPU.  Adding more VCPUs
+	 * afterwards will register the iodevs when needed.
+	 */
+	ret = vgic_register_all_redist_iodevs(kvm);
+	if (ret) {
+		struct vgic_redist_region *rdreg;
+
+		mutex_lock(&kvm->arch.config_lock);
+		rdreg = vgic_v3_rdist_region_from_index(kvm, index);
+		vgic_v3_free_redist_region(rdreg);
+		mutex_unlock(&kvm->arch.config_lock);
+		return ret;
+	}
+
+	return 0;
+}
+
+int vgic_v3_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+	const struct vgic_register_region *region;
+	struct vgic_io_device iodev;
+	struct vgic_reg_attr reg_attr;
+	struct kvm_vcpu *vcpu;
+	gpa_t addr;
+	int ret;
+
+	ret = vgic_v3_parse_attr(dev, attr, &reg_attr);
+	if (ret)
+		return ret;
+
+	vcpu = reg_attr.vcpu;
+	addr = reg_attr.addr;
+
+	switch (attr->group) {
+	case KVM_DEV_ARM_VGIC_GRP_DIST_REGS:
+		iodev.regions = vgic_v3_dist_registers;
+		iodev.nr_regions = ARRAY_SIZE(vgic_v3_dist_registers);
+		iodev.base_addr = 0;
+		break;
+	case KVM_DEV_ARM_VGIC_GRP_REDIST_REGS:{
+		iodev.regions = vgic_v3_rd_registers;
+		iodev.nr_regions = ARRAY_SIZE(vgic_v3_rd_registers);
+		iodev.base_addr = 0;
+		break;
+	}
+	case KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS:
+		return vgic_v3_has_cpu_sysregs_attr(vcpu, attr);
+	default:
+		return -ENXIO;
+	}
+
+	/* We only support aligned 32-bit accesses. */
+	if (addr & 3)
+		return -ENXIO;
+
+	region = vgic_get_mmio_region(vcpu, &iodev, addr, sizeof(u32));
+	if (!region)
+		return -ENXIO;
+
+	return 0;
+}
+/*
+ * Compare a given affinity (level 1-3 and a level 0 mask, from the SGI
+ * generation register ICC_SGI1R_EL1) with a given VCPU.
+ * If the VCPU's MPIDR matches, return the level0 affinity, otherwise
+ * return -1.
+ */
+static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu)
+{
+	unsigned long affinity;
+	int level0;
+
+	/*
+	 * Split the current VCPU's MPIDR into affinity level 0 and the
+	 * rest as this is what we have to compare against.
+	 */
+	affinity = kvm_vcpu_get_mpidr_aff(vcpu);
+	level0 = MPIDR_AFFINITY_LEVEL(affinity, 0);
+	affinity &= ~MPIDR_LEVEL_MASK;
+
+	/* bail out if the upper three levels don't match */
+	if (sgi_aff != affinity)
+		return -1;
+
+	/* Is this VCPU's bit set in the mask ? */
+	if (!(sgi_cpu_mask & BIT(level0)))
+		return -1;
+
+	return level0;
+}
+
+/*
+ * The ICC_SGI* registers encode the affinity differently from the MPIDR,
+ * so provide a wrapper to use the existing defines to isolate a certain
+ * affinity level.
+ */
+#define SGI_AFFINITY_LEVEL(reg, level) \
+	((((reg) & ICC_SGI1R_AFFINITY_## level ##_MASK) \
+	>> ICC_SGI1R_AFFINITY_## level ##_SHIFT) << MPIDR_LEVEL_SHIFT(level))
+
+/**
+ * vgic_v3_dispatch_sgi - handle SGI requests from VCPUs
+ * @vcpu: The VCPU requesting a SGI
+ * @reg: The value written into ICC_{ASGI1,SGI0,SGI1}R by that VCPU
+ * @allow_group1: Does the sysreg access allow generation of G1 SGIs
+ *
+ * With GICv3 (and ARE=1) CPUs trigger SGIs by writing to a system register.
+ * This will trap in sys_regs.c and call this function.
+ * This ICC_SGI1R_EL1 register contains the upper three affinity levels of the
+ * target processors as well as a bitmask of 16 Aff0 CPUs.
+ * If the interrupt routing mode bit is not set, we iterate over all VCPUs to
+ * check for matching ones. If this bit is set, we signal all, but not the
+ * calling VCPU.
+ */
+void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_vcpu *c_vcpu;
+	u16 target_cpus;
+	u64 mpidr;
+	int sgi;
+	int vcpu_id = vcpu->vcpu_id;
+	bool broadcast;
+	unsigned long c, flags;
+
+	sgi = (reg & ICC_SGI1R_SGI_ID_MASK) >> ICC_SGI1R_SGI_ID_SHIFT;
+	broadcast = reg & BIT_ULL(ICC_SGI1R_IRQ_ROUTING_MODE_BIT);
+	target_cpus = (reg & ICC_SGI1R_TARGET_LIST_MASK) >> ICC_SGI1R_TARGET_LIST_SHIFT;
+	mpidr = SGI_AFFINITY_LEVEL(reg, 3);
+	mpidr |= SGI_AFFINITY_LEVEL(reg, 2);
+	mpidr |= SGI_AFFINITY_LEVEL(reg, 1);
+
+	/*
+	 * We iterate over all VCPUs to find the MPIDRs matching the request.
+	 * If we have handled one CPU, we clear its bit to detect early
+	 * if we are already finished. This avoids iterating through all
+	 * VCPUs when most of the times we just signal a single VCPU.
+	 */
+	kvm_for_each_vcpu(c, c_vcpu, kvm) {
+		struct vgic_irq *irq;
+
+		/* Exit early if we have dealt with all requested CPUs */
+		if (!broadcast && target_cpus == 0)
+			break;
+
+		/* Don't signal the calling VCPU */
+		if (broadcast && c == vcpu_id)
+			continue;
+
+		if (!broadcast) {
+			int level0;
+
+			level0 = match_mpidr(mpidr, target_cpus, c_vcpu);
+			if (level0 == -1)
+				continue;
+
+			/* remove this matching VCPU from the mask */
+			target_cpus &= ~BIT(level0);
+		}
+
+		irq = vgic_get_irq(vcpu->kvm, c_vcpu, sgi);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		/*
+		 * An access targeting Group0 SGIs can only generate
+		 * those, while an access targeting Group1 SGIs can
+		 * generate interrupts of either group.
+		 */
+		if (!irq->group || allow_group1) {
+			if (!irq->hw) {
+				irq->pending_latch = true;
+				vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+			} else {
+				/* HW SGI? Ask the GIC to inject it */
+				int err;
+				err = irq_set_irqchip_state(irq->host_irq,
+							    IRQCHIP_STATE_PENDING,
+							    true);
+				WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+				raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+			}
+		} else {
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		}
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+int vgic_v3_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			 int offset, u32 *val)
+{
+	struct vgic_io_device dev = {
+		.regions = vgic_v3_dist_registers,
+		.nr_regions = ARRAY_SIZE(vgic_v3_dist_registers),
+	};
+
+	return vgic_uaccess(vcpu, &dev, is_write, offset, val);
+}
+
+int vgic_v3_redist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			   int offset, u32 *val)
+{
+	struct vgic_io_device rd_dev = {
+		.regions = vgic_v3_rd_registers,
+		.nr_regions = ARRAY_SIZE(vgic_v3_rd_registers),
+	};
+
+	return vgic_uaccess(vcpu, &rd_dev, is_write, offset, val);
+}
+
+int vgic_v3_line_level_info_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+				    u32 intid, u32 *val)
+{
+	if (intid % 32)
+		return -EINVAL;
+
+	if (is_write)
+		vgic_write_irq_line_level_info(vcpu, intid, *val);
+	else
+		*val = vgic_read_irq_line_level_info(vcpu, intid);
+
+	return 0;
+}
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
new file mode 100644
index 000000000..ff558c05e
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -0,0 +1,1118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VGIC MMIO handling functions
+ */
+
+#include <linux/bitops.h>
+#include <linux/bsearch.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <kvm/iodev.h>
+#include <kvm/arm_arch_timer.h>
+#include <kvm/arm_vgic.h>
+
+#include "vgic.h"
+#include "vgic-mmio.h"
+
+unsigned long vgic_mmio_read_raz(struct kvm_vcpu *vcpu,
+				 gpa_t addr, unsigned int len)
+{
+	return 0;
+}
+
+unsigned long vgic_mmio_read_rao(struct kvm_vcpu *vcpu,
+				 gpa_t addr, unsigned int len)
+{
+	return -1UL;
+}
+
+void vgic_mmio_write_wi(struct kvm_vcpu *vcpu, gpa_t addr,
+			unsigned int len, unsigned long val)
+{
+	/* Ignore */
+}
+
+int vgic_mmio_uaccess_write_wi(struct kvm_vcpu *vcpu, gpa_t addr,
+			       unsigned int len, unsigned long val)
+{
+	/* Ignore */
+	return 0;
+}
+
+unsigned long vgic_mmio_read_group(struct kvm_vcpu *vcpu,
+				   gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 value = 0;
+	int i;
+
+	/* Loop over all IRQs affected by this read */
+	for (i = 0; i < len * 8; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		if (irq->group)
+			value |= BIT(i);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return value;
+}
+
+static void vgic_update_vsgi(struct vgic_irq *irq)
+{
+	WARN_ON(its_prop_update_vsgi(irq->host_irq, irq->priority, irq->group));
+}
+
+void vgic_mmio_write_group(struct kvm_vcpu *vcpu, gpa_t addr,
+			   unsigned int len, unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < len * 8; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->group = !!(val & BIT(i));
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			vgic_update_vsgi(irq);
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		} else {
+			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		}
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+/*
+ * Read accesses to both GICD_ICENABLER and GICD_ISENABLER return the value
+ * of the enabled bit, so there is only one function for both here.
+ */
+unsigned long vgic_mmio_read_enable(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 value = 0;
+	int i;
+
+	/* Loop over all IRQs affected by this read */
+	for (i = 0; i < len * 8; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		if (irq->enabled)
+			value |= (1U << i);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return value;
+}
+
+void vgic_mmio_write_senable(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			if (!irq->enabled) {
+				struct irq_data *data;
+
+				irq->enabled = true;
+				data = &irq_to_desc(irq->host_irq)->irq_data;
+				while (irqd_irq_disabled(data))
+					enable_irq(irq->host_irq);
+			}
+
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+			vgic_put_irq(vcpu->kvm, irq);
+
+			continue;
+		} else if (vgic_irq_is_mapped_level(irq)) {
+			bool was_high = irq->line_level;
+
+			/*
+			 * We need to update the state of the interrupt because
+			 * the guest might have changed the state of the device
+			 * while the interrupt was disabled at the VGIC level.
+			 */
+			irq->line_level = vgic_get_phys_line_level(irq);
+			/*
+			 * Deactivate the physical interrupt so the GIC will let
+			 * us know when it is asserted again.
+			 */
+			if (!irq->active && was_high && !irq->line_level)
+				vgic_irq_set_phys_active(irq, false);
+		}
+		irq->enabled = true;
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+void vgic_mmio_write_cenable(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		if (irq->hw && vgic_irq_is_sgi(irq->intid) && irq->enabled)
+			disable_irq_nosync(irq->host_irq);
+
+		irq->enabled = false;
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+int vgic_uaccess_write_senable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->enabled = true;
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->enabled = false;
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+static unsigned long __read_pending(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    bool is_user)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 value = 0;
+	int i;
+
+	/* Loop over all IRQs affected by this read */
+	for (i = 0; i < len * 8; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+		unsigned long flags;
+		bool val;
+
+		/*
+		 * When used from userspace with a GICv3 model:
+		 *
+		 * Pending state of interrupt is latched in pending_latch
+		 * variable.  Userspace will save and restore pending state
+		 * and line_level separately.
+		 * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.rst
+		 * for handling of ISPENDR and ICPENDR.
+		 */
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			int err;
+
+			val = false;
+			err = irq_get_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    &val);
+			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+		} else if (!is_user && vgic_irq_is_mapped_level(irq)) {
+			val = vgic_get_phys_line_level(irq);
+		} else {
+			switch (vcpu->kvm->arch.vgic.vgic_model) {
+			case KVM_DEV_TYPE_ARM_VGIC_V3:
+				if (is_user) {
+					val = irq->pending_latch;
+					break;
+				}
+				fallthrough;
+			default:
+				val = irq_is_pending(irq);
+				break;
+			}
+		}
+
+		value |= ((u32)val << i);
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return value;
+}
+
+unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len)
+{
+	return __read_pending(vcpu, addr, len, false);
+}
+
+unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
+					gpa_t addr, unsigned int len)
+{
+	return __read_pending(vcpu, addr, len, true);
+}
+
+static bool is_vgic_v2_sgi(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
+{
+	return (vgic_irq_is_sgi(irq->intid) &&
+		vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2);
+}
+
+void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		/* GICD_ISPENDR0 SGI bits are WI */
+		if (is_vgic_v2_sgi(vcpu, irq)) {
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			/* HW SGI? Ask the GIC to inject it */
+			int err;
+			err = irq_set_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    true);
+			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+			vgic_put_irq(vcpu->kvm, irq);
+
+			continue;
+		}
+
+		irq->pending_latch = true;
+		if (irq->hw)
+			vgic_irq_set_phys_active(irq, true);
+
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->pending_latch = true;
+
+		/*
+		 * GICv2 SGIs are terribly broken. We can't restore
+		 * the source of the interrupt, so just pick the vcpu
+		 * itself as the source...
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source |= BIT(vcpu->vcpu_id);
+
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+/* Must be called with irq->irq_lock held */
+static void vgic_hw_irq_cpending(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
+{
+	irq->pending_latch = false;
+
+	/*
+	 * We don't want the guest to effectively mask the physical
+	 * interrupt by doing a write to SPENDR followed by a write to
+	 * CPENDR for HW interrupts, so we clear the active state on
+	 * the physical side if the virtual interrupt is not active.
+	 * This may lead to taking an additional interrupt on the
+	 * host, but that should not be a problem as the worst that
+	 * can happen is an additional vgic injection.  We also clear
+	 * the pending state to maintain proper semantics for edge HW
+	 * interrupts.
+	 */
+	vgic_irq_set_phys_pending(irq, false);
+	if (!irq->active)
+		vgic_irq_set_phys_active(irq, false);
+}
+
+void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		/* GICD_ICPENDR0 SGI bits are WI */
+		if (is_vgic_v2_sgi(vcpu, irq)) {
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+			/* HW SGI? Ask the GIC to clear its pending bit */
+			int err;
+			err = irq_set_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    false);
+			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+			vgic_put_irq(vcpu->kvm, irq);
+
+			continue;
+		}
+
+		if (irq->hw)
+			vgic_hw_irq_cpending(vcpu, irq);
+		else
+			irq->pending_latch = false;
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+	unsigned long flags;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		/*
+		 * More fun with GICv2 SGIs! If we're clearing one of them
+		 * from userspace, which source vcpu to clear? Let's not
+		 * even think of it, and blow the whole set.
+		 */
+		if (is_vgic_v2_sgi(vcpu, irq))
+			irq->source = 0;
+
+		irq->pending_latch = false;
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return 0;
+}
+
+/*
+ * If we are fiddling with an IRQ's active state, we have to make sure the IRQ
+ * is not queued on some running VCPU's LRs, because then the change to the
+ * active state can be overwritten when the VCPU's state is synced coming back
+ * from the guest.
+ *
+ * For shared interrupts as well as GICv3 private interrupts accessed from the
+ * non-owning CPU, we have to stop all the VCPUs because interrupts can be
+ * migrated while we don't hold the IRQ locks and we don't want to be chasing
+ * moving targets.
+ *
+ * For GICv2 private interrupts we don't have to do anything because
+ * userspace accesses to the VGIC state already require all VCPUs to be
+ * stopped, and only the VCPU itself can modify its private interrupts
+ * active state, which guarantees that the VCPU is not running.
+ */
+static void vgic_access_active_prepare(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if ((vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 &&
+	     vcpu != kvm_get_running_vcpu()) ||
+	    intid >= VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_halt_guest(vcpu->kvm);
+}
+
+/* See vgic_access_active_prepare */
+static void vgic_access_active_finish(struct kvm_vcpu *vcpu, u32 intid)
+{
+	if ((vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3 &&
+	     vcpu != kvm_get_running_vcpu()) ||
+	    intid >= VGIC_NR_PRIVATE_IRQS)
+		kvm_arm_resume_guest(vcpu->kvm);
+}
+
+static unsigned long __vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+					     gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 value = 0;
+	int i;
+
+	/* Loop over all IRQs affected by this read */
+	for (i = 0; i < len * 8; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		/*
+		 * Even for HW interrupts, don't evaluate the HW state as
+		 * all the guest is interested in is the virtual state.
+		 */
+		if (irq->active)
+			value |= (1U << i);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return value;
+}
+
+unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	u32 val;
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	vgic_access_active_prepare(vcpu, intid);
+
+	val = __vgic_mmio_read_active(vcpu, addr, len);
+
+	vgic_access_active_finish(vcpu, intid);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+
+	return val;
+}
+
+unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	return __vgic_mmio_read_active(vcpu, addr, len);
+}
+
+/* Must be called with irq->irq_lock held */
+static void vgic_hw_irq_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
+				      bool active, bool is_uaccess)
+{
+	if (is_uaccess)
+		return;
+
+	irq->active = active;
+	vgic_irq_set_phys_active(irq, active);
+}
+
+static void vgic_mmio_change_active(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
+				    bool active)
+{
+	unsigned long flags;
+	struct kvm_vcpu *requester_vcpu = kvm_get_running_vcpu();
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+	if (irq->hw && !vgic_irq_is_sgi(irq->intid)) {
+		vgic_hw_irq_change_active(vcpu, irq, active, !requester_vcpu);
+	} else if (irq->hw && vgic_irq_is_sgi(irq->intid)) {
+		/*
+		 * GICv4.1 VSGI feature doesn't track an active state,
+		 * so let's not kid ourselves, there is nothing we can
+		 * do here.
+		 */
+		irq->active = false;
+	} else {
+		u32 model = vcpu->kvm->arch.vgic.vgic_model;
+		u8 active_source;
+
+		irq->active = active;
+
+		/*
+		 * The GICv2 architecture indicates that the source CPUID for
+		 * an SGI should be provided during an EOI which implies that
+		 * the active state is stored somewhere, but at the same time
+		 * this state is not architecturally exposed anywhere and we
+		 * have no way of knowing the right source.
+		 *
+		 * This may lead to a VCPU not being able to receive
+		 * additional instances of a particular SGI after migration
+		 * for a GICv2 VM on some GIC implementations.  Oh well.
+		 */
+		active_source = (requester_vcpu) ? requester_vcpu->vcpu_id : 0;
+
+		if (model == KVM_DEV_TYPE_ARM_VGIC_V2 &&
+		    active && vgic_irq_is_sgi(irq->intid))
+			irq->active_source = active_source;
+	}
+
+	if (irq->active)
+		vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+	else
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+}
+
+static void __vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
+				      gpa_t addr, unsigned int len,
+				      unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+		vgic_mmio_change_active(vcpu, irq, false);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	vgic_access_active_prepare(vcpu, intid);
+
+	__vgic_mmio_write_cactive(vcpu, addr, len, val);
+
+	vgic_access_active_finish(vcpu, intid);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+}
+
+int vgic_mmio_uaccess_write_cactive(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	__vgic_mmio_write_cactive(vcpu, addr, len, val);
+	return 0;
+}
+
+static void __vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
+				      gpa_t addr, unsigned int len,
+				      unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+	int i;
+
+	for_each_set_bit(i, &val, len * 8) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+		vgic_mmio_change_active(vcpu, irq, true);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 1);
+
+	mutex_lock(&vcpu->kvm->arch.config_lock);
+	vgic_access_active_prepare(vcpu, intid);
+
+	__vgic_mmio_write_sactive(vcpu, addr, len, val);
+
+	vgic_access_active_finish(vcpu, intid);
+	mutex_unlock(&vcpu->kvm->arch.config_lock);
+}
+
+int vgic_mmio_uaccess_write_sactive(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len,
+				     unsigned long val)
+{
+	__vgic_mmio_write_sactive(vcpu, addr, len, val);
+	return 0;
+}
+
+unsigned long vgic_mmio_read_priority(struct kvm_vcpu *vcpu,
+				      gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 8);
+	int i;
+	u64 val = 0;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		val |= (u64)irq->priority << (i * 8);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return val;
+}
+
+/*
+ * We currently don't handle changing the priority of an interrupt that
+ * is already pending on a VCPU. If there is a need for this, we would
+ * need to make this VCPU exit and re-evaluate the priorities, potentially
+ * leading to this interrupt getting presented now to the guest (if it has
+ * been masked by the priority mask before).
+ */
+void vgic_mmio_write_priority(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 8);
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < len; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		/* Narrow the priority range to what we actually support */
+		irq->priority = (val >> (i * 8)) & GENMASK(7, 8 - VGIC_PRI_BITS);
+		if (irq->hw && vgic_irq_is_sgi(irq->intid))
+			vgic_update_vsgi(irq);
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+unsigned long vgic_mmio_read_config(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 2);
+	u32 value = 0;
+	int i;
+
+	for (i = 0; i < len * 4; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		if (irq->config == VGIC_CONFIG_EDGE)
+			value |= (2U << (i * 2));
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return value;
+}
+
+void vgic_mmio_write_config(struct kvm_vcpu *vcpu,
+			    gpa_t addr, unsigned int len,
+			    unsigned long val)
+{
+	u32 intid = VGIC_ADDR_TO_INTID(addr, 2);
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < len * 4; i++) {
+		struct vgic_irq *irq;
+
+		/*
+		 * The configuration cannot be changed for SGIs in general,
+		 * for PPIs this is IMPLEMENTATION DEFINED. The arch timer
+		 * code relies on PPIs being level triggered, so we also
+		 * make them read-only here.
+		 */
+		if (intid + i < VGIC_NR_PRIVATE_IRQS)
+			continue;
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		if (test_bit(i * 2 + 1, &val))
+			irq->config = VGIC_CONFIG_EDGE;
+		else
+			irq->config = VGIC_CONFIG_LEVEL;
+
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+u32 vgic_read_irq_line_level_info(struct kvm_vcpu *vcpu, u32 intid)
+{
+	int i;
+	u32 val = 0;
+	int nr_irqs = vcpu->kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS;
+
+	for (i = 0; i < 32; i++) {
+		struct vgic_irq *irq;
+
+		if ((intid + i) < VGIC_NR_SGIS || (intid + i) >= nr_irqs)
+			continue;
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+		if (irq->config == VGIC_CONFIG_LEVEL && irq->line_level)
+			val |= (1U << i);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	return val;
+}
+
+void vgic_write_irq_line_level_info(struct kvm_vcpu *vcpu, u32 intid,
+				    const u32 val)
+{
+	int i;
+	int nr_irqs = vcpu->kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS;
+	unsigned long flags;
+
+	for (i = 0; i < 32; i++) {
+		struct vgic_irq *irq;
+		bool new_level;
+
+		if ((intid + i) < VGIC_NR_SGIS || (intid + i) >= nr_irqs)
+			continue;
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i);
+
+		/*
+		 * Line level is set irrespective of irq type
+		 * (level or edge) to avoid dependency that VM should
+		 * restore irq config before line level.
+		 */
+		new_level = !!(val & (1U << i));
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		irq->line_level = new_level;
+		if (new_level)
+			vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+		else
+			raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+static int match_region(const void *key, const void *elt)
+{
+	const unsigned int offset = (unsigned long)key;
+	const struct vgic_register_region *region = elt;
+
+	if (offset < region->reg_offset)
+		return -1;
+
+	if (offset >= region->reg_offset + region->len)
+		return 1;
+
+	return 0;
+}
+
+const struct vgic_register_region *
+vgic_find_mmio_region(const struct vgic_register_region *regions,
+		      int nr_regions, unsigned int offset)
+{
+	return bsearch((void *)(uintptr_t)offset, regions, nr_regions,
+		       sizeof(regions[0]), match_region);
+}
+
+void vgic_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_set_vmcr(vcpu, vmcr);
+	else
+		vgic_v3_set_vmcr(vcpu, vmcr);
+}
+
+void vgic_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_get_vmcr(vcpu, vmcr);
+	else
+		vgic_v3_get_vmcr(vcpu, vmcr);
+}
+
+/*
+ * kvm_mmio_read_buf() returns a value in a format where it can be converted
+ * to a byte array and be directly observed as the guest wanted it to appear
+ * in memory if it had done the store itself, which is LE for the GIC, as the
+ * guest knows the GIC is always LE.
+ *
+ * We convert this value to the CPUs native format to deal with it as a data
+ * value.
+ */
+unsigned long vgic_data_mmio_bus_to_host(const void *val, unsigned int len)
+{
+	unsigned long data = kvm_mmio_read_buf(val, len);
+
+	switch (len) {
+	case 1:
+		return data;
+	case 2:
+		return le16_to_cpu(data);
+	case 4:
+		return le32_to_cpu(data);
+	default:
+		return le64_to_cpu(data);
+	}
+}
+
+/*
+ * kvm_mmio_write_buf() expects a value in a format such that if converted to
+ * a byte array it is observed as the guest would see it if it could perform
+ * the load directly.  Since the GIC is LE, and the guest knows this, the
+ * guest expects a value in little endian format.
+ *
+ * We convert the data value from the CPUs native format to LE so that the
+ * value is returned in the proper format.
+ */
+void vgic_data_host_to_mmio_bus(void *buf, unsigned int len,
+				unsigned long data)
+{
+	switch (len) {
+	case 1:
+		break;
+	case 2:
+		data = cpu_to_le16(data);
+		break;
+	case 4:
+		data = cpu_to_le32(data);
+		break;
+	default:
+		data = cpu_to_le64(data);
+	}
+
+	kvm_mmio_write_buf(buf, len, data);
+}
+
+static
+struct vgic_io_device *kvm_to_vgic_iodev(const struct kvm_io_device *dev)
+{
+	return container_of(dev, struct vgic_io_device, dev);
+}
+
+static bool check_region(const struct kvm *kvm,
+			 const struct vgic_register_region *region,
+			 gpa_t addr, int len)
+{
+	int flags, nr_irqs = kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS;
+
+	switch (len) {
+	case sizeof(u8):
+		flags = VGIC_ACCESS_8bit;
+		break;
+	case sizeof(u32):
+		flags = VGIC_ACCESS_32bit;
+		break;
+	case sizeof(u64):
+		flags = VGIC_ACCESS_64bit;
+		break;
+	default:
+		return false;
+	}
+
+	if ((region->access_flags & flags) && IS_ALIGNED(addr, len)) {
+		if (!region->bits_per_irq)
+			return true;
+
+		/* Do we access a non-allocated IRQ? */
+		return VGIC_ADDR_TO_INTID(addr, region->bits_per_irq) < nr_irqs;
+	}
+
+	return false;
+}
+
+const struct vgic_register_region *
+vgic_get_mmio_region(struct kvm_vcpu *vcpu, struct vgic_io_device *iodev,
+		     gpa_t addr, int len)
+{
+	const struct vgic_register_region *region;
+
+	region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions,
+				       addr - iodev->base_addr);
+	if (!region || !check_region(vcpu->kvm, region, addr, len))
+		return NULL;
+
+	return region;
+}
+
+static int vgic_uaccess_read(struct kvm_vcpu *vcpu, struct vgic_io_device *iodev,
+			     gpa_t addr, u32 *val)
+{
+	const struct vgic_register_region *region;
+	struct kvm_vcpu *r_vcpu;
+
+	region = vgic_get_mmio_region(vcpu, iodev, addr, sizeof(u32));
+	if (!region) {
+		*val = 0;
+		return 0;
+	}
+
+	r_vcpu = iodev->redist_vcpu ? iodev->redist_vcpu : vcpu;
+	if (region->uaccess_read)
+		*val = region->uaccess_read(r_vcpu, addr, sizeof(u32));
+	else
+		*val = region->read(r_vcpu, addr, sizeof(u32));
+
+	return 0;
+}
+
+static int vgic_uaccess_write(struct kvm_vcpu *vcpu, struct vgic_io_device *iodev,
+			      gpa_t addr, const u32 *val)
+{
+	const struct vgic_register_region *region;
+	struct kvm_vcpu *r_vcpu;
+
+	region = vgic_get_mmio_region(vcpu, iodev, addr, sizeof(u32));
+	if (!region)
+		return 0;
+
+	r_vcpu = iodev->redist_vcpu ? iodev->redist_vcpu : vcpu;
+	if (region->uaccess_write)
+		return region->uaccess_write(r_vcpu, addr, sizeof(u32), *val);
+
+	region->write(r_vcpu, addr, sizeof(u32), *val);
+	return 0;
+}
+
+/*
+ * Userland access to VGIC registers.
+ */
+int vgic_uaccess(struct kvm_vcpu *vcpu, struct vgic_io_device *dev,
+		 bool is_write, int offset, u32 *val)
+{
+	if (is_write)
+		return vgic_uaccess_write(vcpu, dev, offset, val);
+	else
+		return vgic_uaccess_read(vcpu, dev, offset, val);
+}
+
+static int dispatch_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *dev,
+			      gpa_t addr, int len, void *val)
+{
+	struct vgic_io_device *iodev = kvm_to_vgic_iodev(dev);
+	const struct vgic_register_region *region;
+	unsigned long data = 0;
+
+	region = vgic_get_mmio_region(vcpu, iodev, addr, len);
+	if (!region) {
+		memset(val, 0, len);
+		return 0;
+	}
+
+	switch (iodev->iodev_type) {
+	case IODEV_CPUIF:
+		data = region->read(vcpu, addr, len);
+		break;
+	case IODEV_DIST:
+		data = region->read(vcpu, addr, len);
+		break;
+	case IODEV_REDIST:
+		data = region->read(iodev->redist_vcpu, addr, len);
+		break;
+	case IODEV_ITS:
+		data = region->its_read(vcpu->kvm, iodev->its, addr, len);
+		break;
+	}
+
+	vgic_data_host_to_mmio_bus(val, len, data);
+	return 0;
+}
+
+static int dispatch_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *dev,
+			       gpa_t addr, int len, const void *val)
+{
+	struct vgic_io_device *iodev = kvm_to_vgic_iodev(dev);
+	const struct vgic_register_region *region;
+	unsigned long data = vgic_data_mmio_bus_to_host(val, len);
+
+	region = vgic_get_mmio_region(vcpu, iodev, addr, len);
+	if (!region)
+		return 0;
+
+	switch (iodev->iodev_type) {
+	case IODEV_CPUIF:
+		region->write(vcpu, addr, len, data);
+		break;
+	case IODEV_DIST:
+		region->write(vcpu, addr, len, data);
+		break;
+	case IODEV_REDIST:
+		region->write(iodev->redist_vcpu, addr, len, data);
+		break;
+	case IODEV_ITS:
+		region->its_write(vcpu->kvm, iodev->its, addr, len, data);
+		break;
+	}
+
+	return 0;
+}
+
+const struct kvm_io_device_ops kvm_io_gic_ops = {
+	.read = dispatch_mmio_read,
+	.write = dispatch_mmio_write,
+};
+
+int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
+			     enum vgic_type type)
+{
+	struct vgic_io_device *io_device = &kvm->arch.vgic.dist_iodev;
+	unsigned int len;
+
+	switch (type) {
+	case VGIC_V2:
+		len = vgic_v2_init_dist_iodev(io_device);
+		break;
+	case VGIC_V3:
+		len = vgic_v3_init_dist_iodev(io_device);
+		break;
+	default:
+		BUG_ON(1);
+	}
+
+	io_device->base_addr = dist_base_address;
+	io_device->iodev_type = IODEV_DIST;
+	io_device->redist_vcpu = NULL;
+
+	return kvm_io_bus_register_dev(kvm, KVM_MMIO_BUS, dist_base_address,
+				       len, &io_device->dev);
+}
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.h b/arch/arm64/kvm/vgic/vgic-mmio.h
new file mode 100644
index 000000000..5b490a4df
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-mmio.h
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ */
+#ifndef __KVM_ARM_VGIC_MMIO_H__
+#define __KVM_ARM_VGIC_MMIO_H__
+
+struct vgic_register_region {
+	unsigned int reg_offset;
+	unsigned int len;
+	unsigned int bits_per_irq;
+	unsigned int access_flags;
+	union {
+		unsigned long (*read)(struct kvm_vcpu *vcpu, gpa_t addr,
+				      unsigned int len);
+		unsigned long (*its_read)(struct kvm *kvm, struct vgic_its *its,
+					  gpa_t addr, unsigned int len);
+	};
+	union {
+		void (*write)(struct kvm_vcpu *vcpu, gpa_t addr,
+			      unsigned int len, unsigned long val);
+		void (*its_write)(struct kvm *kvm, struct vgic_its *its,
+				  gpa_t addr, unsigned int len,
+				  unsigned long val);
+	};
+	unsigned long (*uaccess_read)(struct kvm_vcpu *vcpu, gpa_t addr,
+				      unsigned int len);
+	union {
+		int (*uaccess_write)(struct kvm_vcpu *vcpu, gpa_t addr,
+				     unsigned int len, unsigned long val);
+		int (*uaccess_its_write)(struct kvm *kvm, struct vgic_its *its,
+					 gpa_t addr, unsigned int len,
+					 unsigned long val);
+	};
+};
+
+extern const struct kvm_io_device_ops kvm_io_gic_ops;
+
+#define VGIC_ACCESS_8bit	1
+#define VGIC_ACCESS_32bit	2
+#define VGIC_ACCESS_64bit	4
+
+/*
+ * Generate a mask that covers the number of bytes required to address
+ * up to 1024 interrupts, each represented by <bits> bits. This assumes
+ * that <bits> is a power of two.
+ */
+#define VGIC_ADDR_IRQ_MASK(bits) (((bits) * 1024 / 8) - 1)
+
+/*
+ * (addr & mask) gives us the _byte_ offset for the INT ID.
+ * We multiply this by 8 the get the _bit_ offset, then divide this by
+ * the number of bits to learn the actual INT ID.
+ * But instead of a division (which requires a "long long div" implementation),
+ * we shift by the binary logarithm of <bits>.
+ * This assumes that <bits> is a power of two.
+ */
+#define VGIC_ADDR_TO_INTID(addr, bits)  (((addr) & VGIC_ADDR_IRQ_MASK(bits)) * \
+					8 >> ilog2(bits))
+
+/*
+ * Some VGIC registers store per-IRQ information, with a different number
+ * of bits per IRQ. For those registers this macro is used.
+ * The _WITH_LENGTH version instantiates registers with a fixed length
+ * and is mutually exclusive with the _PER_IRQ version.
+ */
+#define REGISTER_DESC_WITH_BITS_PER_IRQ(off, rd, wr, ur, uw, bpi, acc)	\
+	{								\
+		.reg_offset = off,					\
+		.bits_per_irq = bpi,					\
+		.len = bpi * 1024 / 8,					\
+		.access_flags = acc,					\
+		.read = rd,						\
+		.write = wr,						\
+		.uaccess_read = ur,					\
+		.uaccess_write = uw,					\
+	}
+
+#define REGISTER_DESC_WITH_LENGTH(off, rd, wr, length, acc)		\
+	{								\
+		.reg_offset = off,					\
+		.bits_per_irq = 0,					\
+		.len = length,						\
+		.access_flags = acc,					\
+		.read = rd,						\
+		.write = wr,						\
+	}
+
+#define REGISTER_DESC_WITH_LENGTH_UACCESS(off, rd, wr, urd, uwr, length, acc) \
+	{								\
+		.reg_offset = off,					\
+		.bits_per_irq = 0,					\
+		.len = length,						\
+		.access_flags = acc,					\
+		.read = rd,						\
+		.write = wr,						\
+		.uaccess_read = urd,					\
+		.uaccess_write = uwr,					\
+	}
+
+unsigned long vgic_data_mmio_bus_to_host(const void *val, unsigned int len);
+
+void vgic_data_host_to_mmio_bus(void *buf, unsigned int len,
+				unsigned long data);
+
+unsigned long extract_bytes(u64 data, unsigned int offset,
+			    unsigned int num);
+
+u64 update_64bit_reg(u64 reg, unsigned int offset, unsigned int len,
+		     unsigned long val);
+
+unsigned long vgic_mmio_read_raz(struct kvm_vcpu *vcpu,
+				 gpa_t addr, unsigned int len);
+
+unsigned long vgic_mmio_read_rao(struct kvm_vcpu *vcpu,
+				 gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_wi(struct kvm_vcpu *vcpu, gpa_t addr,
+			unsigned int len, unsigned long val);
+
+int vgic_mmio_uaccess_write_wi(struct kvm_vcpu *vcpu, gpa_t addr,
+			       unsigned int len, unsigned long val);
+
+unsigned long vgic_mmio_read_group(struct kvm_vcpu *vcpu, gpa_t addr,
+				   unsigned int len);
+
+void vgic_mmio_write_group(struct kvm_vcpu *vcpu, gpa_t addr,
+			   unsigned int len, unsigned long val);
+
+unsigned long vgic_mmio_read_enable(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_senable(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val);
+
+void vgic_mmio_write_cenable(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val);
+
+int vgic_uaccess_write_senable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val);
+
+int vgic_uaccess_write_cenable(struct kvm_vcpu *vcpu,
+			       gpa_t addr, unsigned int len,
+			       unsigned long val);
+
+unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
+				     gpa_t addr, unsigned int len);
+
+unsigned long vgic_uaccess_read_pending(struct kvm_vcpu *vcpu,
+					gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_spending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val);
+
+void vgic_mmio_write_cpending(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val);
+
+int vgic_uaccess_write_spending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val);
+
+int vgic_uaccess_write_cpending(struct kvm_vcpu *vcpu,
+				gpa_t addr, unsigned int len,
+				unsigned long val);
+
+unsigned long vgic_mmio_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len);
+
+unsigned long vgic_uaccess_read_active(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_cactive(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val);
+
+void vgic_mmio_write_sactive(struct kvm_vcpu *vcpu,
+			     gpa_t addr, unsigned int len,
+			     unsigned long val);
+
+int vgic_mmio_uaccess_write_cactive(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    unsigned long val);
+
+int vgic_mmio_uaccess_write_sactive(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len,
+				    unsigned long val);
+
+unsigned long vgic_mmio_read_priority(struct kvm_vcpu *vcpu,
+				      gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_priority(struct kvm_vcpu *vcpu,
+			      gpa_t addr, unsigned int len,
+			      unsigned long val);
+
+unsigned long vgic_mmio_read_config(struct kvm_vcpu *vcpu,
+				    gpa_t addr, unsigned int len);
+
+void vgic_mmio_write_config(struct kvm_vcpu *vcpu,
+			    gpa_t addr, unsigned int len,
+			    unsigned long val);
+
+int vgic_uaccess(struct kvm_vcpu *vcpu, struct vgic_io_device *dev,
+		 bool is_write, int offset, u32 *val);
+
+u32 vgic_read_irq_line_level_info(struct kvm_vcpu *vcpu, u32 intid);
+
+void vgic_write_irq_line_level_info(struct kvm_vcpu *vcpu, u32 intid,
+				    const u32 val);
+
+unsigned int vgic_v2_init_dist_iodev(struct vgic_io_device *dev);
+
+unsigned int vgic_v3_init_dist_iodev(struct vgic_io_device *dev);
+
+u64 vgic_sanitise_outer_cacheability(u64 reg);
+u64 vgic_sanitise_inner_cacheability(u64 reg);
+u64 vgic_sanitise_shareability(u64 reg);
+u64 vgic_sanitise_field(u64 reg, u64 field_mask, int field_shift,
+			u64 (*sanitise_fn)(u64));
+
+/* Find the proper register handler entry given a certain address offset */
+const struct vgic_register_region *
+vgic_find_mmio_region(const struct vgic_register_region *regions,
+		      int nr_regions, unsigned int offset);
+
+#endif
diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c
new file mode 100644
index 000000000..7e9cdb78f
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-v2.c
@@ -0,0 +1,480 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ */
+
+#include <linux/irqchip/arm-gic.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <kvm/arm_vgic.h>
+#include <asm/kvm_mmu.h>
+
+#include "vgic.h"
+
+static inline void vgic_v2_write_lr(int lr, u32 val)
+{
+	void __iomem *base = kvm_vgic_global_state.vctrl_base;
+
+	writel_relaxed(val, base + GICH_LR0 + (lr * 4));
+}
+
+void vgic_v2_init_lrs(void)
+{
+	int i;
+
+	for (i = 0; i < kvm_vgic_global_state.nr_lr; i++)
+		vgic_v2_write_lr(i, 0);
+}
+
+void vgic_v2_set_underflow(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	cpuif->vgic_hcr |= GICH_HCR_UIE;
+}
+
+static bool lr_signals_eoi_mi(u32 lr_val)
+{
+	return !(lr_val & GICH_LR_STATE) && (lr_val & GICH_LR_EOI) &&
+	       !(lr_val & GICH_LR_HW);
+}
+
+/*
+ * transfer the content of the LRs back into the corresponding ap_list:
+ * - active bit is transferred as is
+ * - pending bit is
+ *   - transferred as is in case of edge sensitive IRQs
+ *   - set to the line-level (resample time) for level sensitive IRQs
+ */
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_v2_cpu_if *cpuif = &vgic_cpu->vgic_v2;
+	int lr;
+
+	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
+
+	cpuif->vgic_hcr &= ~GICH_HCR_UIE;
+
+	for (lr = 0; lr < vgic_cpu->vgic_v2.used_lrs; lr++) {
+		u32 val = cpuif->vgic_lr[lr];
+		u32 cpuid, intid = val & GICH_LR_VIRTUALID;
+		struct vgic_irq *irq;
+		bool deactivated;
+
+		/* Extract the source vCPU id from the LR */
+		cpuid = val & GICH_LR_PHYSID_CPUID;
+		cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
+		cpuid &= 7;
+
+		/* Notify fds when the guest EOI'ed a level-triggered SPI */
+		if (lr_signals_eoi_mi(val) && vgic_valid_spi(vcpu->kvm, intid))
+			kvm_notify_acked_irq(vcpu->kvm, 0,
+					     intid - VGIC_NR_PRIVATE_IRQS);
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
+
+		raw_spin_lock(&irq->irq_lock);
+
+		/* Always preserve the active bit, note deactivation */
+		deactivated = irq->active && !(val & GICH_LR_ACTIVE_BIT);
+		irq->active = !!(val & GICH_LR_ACTIVE_BIT);
+
+		if (irq->active && vgic_irq_is_sgi(intid))
+			irq->active_source = cpuid;
+
+		/* Edge is the only case where we preserve the pending bit */
+		if (irq->config == VGIC_CONFIG_EDGE &&
+		    (val & GICH_LR_PENDING_BIT)) {
+			irq->pending_latch = true;
+
+			if (vgic_irq_is_sgi(intid))
+				irq->source |= (1 << cpuid);
+		}
+
+		/*
+		 * Clear soft pending state when level irqs have been acked.
+		 */
+		if (irq->config == VGIC_CONFIG_LEVEL && !(val & GICH_LR_STATE))
+			irq->pending_latch = false;
+
+		/* Handle resampling for mapped interrupts if required */
+		vgic_irq_handle_resampling(irq, deactivated, val & GICH_LR_PENDING_BIT);
+
+		raw_spin_unlock(&irq->irq_lock);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	cpuif->used_lrs = 0;
+}
+
+/*
+ * Populates the particular LR with the state of a given IRQ:
+ * - for an edge sensitive IRQ the pending state is cleared in struct vgic_irq
+ * - for a level sensitive IRQ the pending state value is unchanged;
+ *   it is dictated directly by the input level
+ *
+ * If @irq describes an SGI with multiple sources, we choose the
+ * lowest-numbered source VCPU and clear that bit in the source bitmap.
+ *
+ * The irq_lock must be held by the caller.
+ */
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+{
+	u32 val = irq->intid;
+	bool allow_pending = true;
+
+	if (irq->active) {
+		val |= GICH_LR_ACTIVE_BIT;
+		if (vgic_irq_is_sgi(irq->intid))
+			val |= irq->active_source << GICH_LR_PHYSID_CPUID_SHIFT;
+		if (vgic_irq_is_multi_sgi(irq)) {
+			allow_pending = false;
+			val |= GICH_LR_EOI;
+		}
+	}
+
+	if (irq->group)
+		val |= GICH_LR_GROUP1;
+
+	if (irq->hw && !vgic_irq_needs_resampling(irq)) {
+		val |= GICH_LR_HW;
+		val |= irq->hwintid << GICH_LR_PHYSID_CPUID_SHIFT;
+		/*
+		 * Never set pending+active on a HW interrupt, as the
+		 * pending state is kept at the physical distributor
+		 * level.
+		 */
+		if (irq->active)
+			allow_pending = false;
+	} else {
+		if (irq->config == VGIC_CONFIG_LEVEL) {
+			val |= GICH_LR_EOI;
+
+			/*
+			 * Software resampling doesn't work very well
+			 * if we allow P+A, so let's not do that.
+			 */
+			if (irq->active)
+				allow_pending = false;
+		}
+	}
+
+	if (allow_pending && irq_is_pending(irq)) {
+		val |= GICH_LR_PENDING_BIT;
+
+		if (irq->config == VGIC_CONFIG_EDGE)
+			irq->pending_latch = false;
+
+		if (vgic_irq_is_sgi(irq->intid)) {
+			u32 src = ffs(irq->source);
+
+			if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n",
+					   irq->intid))
+				return;
+
+			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
+			irq->source &= ~(1 << (src - 1));
+			if (irq->source) {
+				irq->pending_latch = true;
+				val |= GICH_LR_EOI;
+			}
+		}
+	}
+
+	/*
+	 * Level-triggered mapped IRQs are special because we only observe
+	 * rising edges as input to the VGIC.  We therefore lower the line
+	 * level here, so that we can take new virtual IRQs.  See
+	 * vgic_v2_fold_lr_state for more info.
+	 */
+	if (vgic_irq_is_mapped_level(irq) && (val & GICH_LR_PENDING_BIT))
+		irq->line_level = false;
+
+	/* The GICv2 LR only holds five bits of priority. */
+	val |= (irq->priority >> 3) << GICH_LR_PRIORITY_SHIFT;
+
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val;
+}
+
+void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr)
+{
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = 0;
+}
+
+void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+	u32 vmcr;
+
+	vmcr = (vmcrp->grpen0 << GICH_VMCR_ENABLE_GRP0_SHIFT) &
+		GICH_VMCR_ENABLE_GRP0_MASK;
+	vmcr |= (vmcrp->grpen1 << GICH_VMCR_ENABLE_GRP1_SHIFT) &
+		GICH_VMCR_ENABLE_GRP1_MASK;
+	vmcr |= (vmcrp->ackctl << GICH_VMCR_ACK_CTL_SHIFT) &
+		GICH_VMCR_ACK_CTL_MASK;
+	vmcr |= (vmcrp->fiqen << GICH_VMCR_FIQ_EN_SHIFT) &
+		GICH_VMCR_FIQ_EN_MASK;
+	vmcr |= (vmcrp->cbpr << GICH_VMCR_CBPR_SHIFT) &
+		GICH_VMCR_CBPR_MASK;
+	vmcr |= (vmcrp->eoim << GICH_VMCR_EOI_MODE_SHIFT) &
+		GICH_VMCR_EOI_MODE_MASK;
+	vmcr |= (vmcrp->abpr << GICH_VMCR_ALIAS_BINPOINT_SHIFT) &
+		GICH_VMCR_ALIAS_BINPOINT_MASK;
+	vmcr |= (vmcrp->bpr << GICH_VMCR_BINPOINT_SHIFT) &
+		GICH_VMCR_BINPOINT_MASK;
+	vmcr |= ((vmcrp->pmr >> GICV_PMR_PRIORITY_SHIFT) <<
+		 GICH_VMCR_PRIMASK_SHIFT) & GICH_VMCR_PRIMASK_MASK;
+
+	cpu_if->vgic_vmcr = vmcr;
+}
+
+void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+	u32 vmcr;
+
+	vmcr = cpu_if->vgic_vmcr;
+
+	vmcrp->grpen0 = (vmcr & GICH_VMCR_ENABLE_GRP0_MASK) >>
+		GICH_VMCR_ENABLE_GRP0_SHIFT;
+	vmcrp->grpen1 = (vmcr & GICH_VMCR_ENABLE_GRP1_MASK) >>
+		GICH_VMCR_ENABLE_GRP1_SHIFT;
+	vmcrp->ackctl = (vmcr & GICH_VMCR_ACK_CTL_MASK) >>
+		GICH_VMCR_ACK_CTL_SHIFT;
+	vmcrp->fiqen = (vmcr & GICH_VMCR_FIQ_EN_MASK) >>
+		GICH_VMCR_FIQ_EN_SHIFT;
+	vmcrp->cbpr = (vmcr & GICH_VMCR_CBPR_MASK) >>
+		GICH_VMCR_CBPR_SHIFT;
+	vmcrp->eoim = (vmcr & GICH_VMCR_EOI_MODE_MASK) >>
+		GICH_VMCR_EOI_MODE_SHIFT;
+
+	vmcrp->abpr = (vmcr & GICH_VMCR_ALIAS_BINPOINT_MASK) >>
+			GICH_VMCR_ALIAS_BINPOINT_SHIFT;
+	vmcrp->bpr  = (vmcr & GICH_VMCR_BINPOINT_MASK) >>
+			GICH_VMCR_BINPOINT_SHIFT;
+	vmcrp->pmr  = ((vmcr & GICH_VMCR_PRIMASK_MASK) >>
+			GICH_VMCR_PRIMASK_SHIFT) << GICV_PMR_PRIORITY_SHIFT;
+}
+
+void vgic_v2_enable(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * By forcing VMCR to zero, the GIC will restore the binary
+	 * points to their reset values. Anything else resets to zero
+	 * anyway.
+	 */
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_vmcr = 0;
+
+	/* Get the show on the road... */
+	vcpu->arch.vgic_cpu.vgic_v2.vgic_hcr = GICH_HCR_EN;
+}
+
+/* check for overlapping regions and for regions crossing the end of memory */
+static bool vgic_v2_check_base(gpa_t dist_base, gpa_t cpu_base)
+{
+	if (dist_base + KVM_VGIC_V2_DIST_SIZE < dist_base)
+		return false;
+	if (cpu_base + KVM_VGIC_V2_CPU_SIZE < cpu_base)
+		return false;
+
+	if (dist_base + KVM_VGIC_V2_DIST_SIZE <= cpu_base)
+		return true;
+	if (cpu_base + KVM_VGIC_V2_CPU_SIZE <= dist_base)
+		return true;
+
+	return false;
+}
+
+int vgic_v2_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int ret = 0;
+
+	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
+	    IS_VGIC_ADDR_UNDEF(dist->vgic_cpu_base)) {
+		kvm_debug("Need to set vgic cpu and dist addresses first\n");
+		return -ENXIO;
+	}
+
+	if (!vgic_v2_check_base(dist->vgic_dist_base, dist->vgic_cpu_base)) {
+		kvm_debug("VGIC CPU and dist frames overlap\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Initialize the vgic if this hasn't already been done on demand by
+	 * accessing the vgic state from userspace.
+	 */
+	ret = vgic_init(kvm);
+	if (ret) {
+		kvm_err("Unable to initialize VGIC dynamic data structures\n");
+		return ret;
+	}
+
+	if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) {
+		ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
+					    kvm_vgic_global_state.vcpu_base,
+					    KVM_VGIC_V2_CPU_SIZE, true);
+		if (ret) {
+			kvm_err("Unable to remap VGIC CPU to VCPU\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+DEFINE_STATIC_KEY_FALSE(vgic_v2_cpuif_trap);
+
+/**
+ * vgic_v2_probe - probe for a VGICv2 compatible interrupt controller
+ * @info:	pointer to the GIC description
+ *
+ * Returns 0 if the VGICv2 has been probed successfully, returns an error code
+ * otherwise
+ */
+int vgic_v2_probe(const struct gic_kvm_info *info)
+{
+	int ret;
+	u32 vtr;
+
+	if (is_protected_kvm_enabled()) {
+		kvm_err("GICv2 not supported in protected mode\n");
+		return -ENXIO;
+	}
+
+	if (!info->vctrl.start) {
+		kvm_err("GICH not present in the firmware table\n");
+		return -ENXIO;
+	}
+
+	if (!PAGE_ALIGNED(info->vcpu.start) ||
+	    !PAGE_ALIGNED(resource_size(&info->vcpu))) {
+		kvm_info("GICV region size/alignment is unsafe, using trapping (reduced performance)\n");
+
+		ret = create_hyp_io_mappings(info->vcpu.start,
+					     resource_size(&info->vcpu),
+					     &kvm_vgic_global_state.vcpu_base_va,
+					     &kvm_vgic_global_state.vcpu_hyp_va);
+		if (ret) {
+			kvm_err("Cannot map GICV into hyp\n");
+			goto out;
+		}
+
+		static_branch_enable(&vgic_v2_cpuif_trap);
+	}
+
+	ret = create_hyp_io_mappings(info->vctrl.start,
+				     resource_size(&info->vctrl),
+				     &kvm_vgic_global_state.vctrl_base,
+				     &kvm_vgic_global_state.vctrl_hyp);
+	if (ret) {
+		kvm_err("Cannot map VCTRL into hyp\n");
+		goto out;
+	}
+
+	vtr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VTR);
+	kvm_vgic_global_state.nr_lr = (vtr & 0x3f) + 1;
+
+	ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+	if (ret) {
+		kvm_err("Cannot register GICv2 KVM device\n");
+		goto out;
+	}
+
+	kvm_vgic_global_state.can_emulate_gicv2 = true;
+	kvm_vgic_global_state.vcpu_base = info->vcpu.start;
+	kvm_vgic_global_state.type = VGIC_V2;
+	kvm_vgic_global_state.max_gic_vcpus = VGIC_V2_MAX_CPUS;
+
+	kvm_debug("vgic-v2@%llx\n", info->vctrl.start);
+
+	return 0;
+out:
+	if (kvm_vgic_global_state.vctrl_base)
+		iounmap(kvm_vgic_global_state.vctrl_base);
+	if (kvm_vgic_global_state.vcpu_base_va)
+		iounmap(kvm_vgic_global_state.vcpu_base_va);
+
+	return ret;
+}
+
+static void save_lrs(struct kvm_vcpu *vcpu, void __iomem *base)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+	u64 used_lrs = cpu_if->used_lrs;
+	u64 elrsr;
+	int i;
+
+	elrsr = readl_relaxed(base + GICH_ELRSR0);
+	if (unlikely(used_lrs > 32))
+		elrsr |= ((u64)readl_relaxed(base + GICH_ELRSR1)) << 32;
+
+	for (i = 0; i < used_lrs; i++) {
+		if (elrsr & (1UL << i))
+			cpu_if->vgic_lr[i] &= ~GICH_LR_STATE;
+		else
+			cpu_if->vgic_lr[i] = readl_relaxed(base + GICH_LR0 + (i * 4));
+
+		writel_relaxed(0, base + GICH_LR0 + (i * 4));
+	}
+}
+
+void vgic_v2_save_state(struct kvm_vcpu *vcpu)
+{
+	void __iomem *base = kvm_vgic_global_state.vctrl_base;
+	u64 used_lrs = vcpu->arch.vgic_cpu.vgic_v2.used_lrs;
+
+	if (!base)
+		return;
+
+	if (used_lrs) {
+		save_lrs(vcpu, base);
+		writel_relaxed(0, base + GICH_HCR);
+	}
+}
+
+void vgic_v2_restore_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+	void __iomem *base = kvm_vgic_global_state.vctrl_base;
+	u64 used_lrs = cpu_if->used_lrs;
+	int i;
+
+	if (!base)
+		return;
+
+	if (used_lrs) {
+		writel_relaxed(cpu_if->vgic_hcr, base + GICH_HCR);
+		for (i = 0; i < used_lrs; i++) {
+			writel_relaxed(cpu_if->vgic_lr[i],
+				       base + GICH_LR0 + (i * 4));
+		}
+	}
+}
+
+void vgic_v2_load(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	writel_relaxed(cpu_if->vgic_vmcr,
+		       kvm_vgic_global_state.vctrl_base + GICH_VMCR);
+	writel_relaxed(cpu_if->vgic_apr,
+		       kvm_vgic_global_state.vctrl_base + GICH_APR);
+}
+
+void vgic_v2_vmcr_sync(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	cpu_if->vgic_vmcr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VMCR);
+}
+
+void vgic_v2_put(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2;
+
+	vgic_v2_vmcr_sync(vcpu);
+	cpu_if->vgic_apr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_APR);
+}
diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
new file mode 100644
index 000000000..3dfc8b84e
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-v3.c
@@ -0,0 +1,760 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kstrtox.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <kvm/arm_vgic.h>
+#include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
+#include <asm/kvm_asm.h>
+
+#include "vgic.h"
+
+static bool group0_trap;
+static bool group1_trap;
+static bool common_trap;
+static bool dir_trap;
+static bool gicv4_enable;
+
+void vgic_v3_set_underflow(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	cpuif->vgic_hcr |= ICH_HCR_UIE;
+}
+
+static bool lr_signals_eoi_mi(u64 lr_val)
+{
+	return !(lr_val & ICH_LR_STATE) && (lr_val & ICH_LR_EOI) &&
+	       !(lr_val & ICH_LR_HW);
+}
+
+void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_v3_cpu_if *cpuif = &vgic_cpu->vgic_v3;
+	u32 model = vcpu->kvm->arch.vgic.vgic_model;
+	int lr;
+
+	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
+
+	cpuif->vgic_hcr &= ~ICH_HCR_UIE;
+
+	for (lr = 0; lr < cpuif->used_lrs; lr++) {
+		u64 val = cpuif->vgic_lr[lr];
+		u32 intid, cpuid;
+		struct vgic_irq *irq;
+		bool is_v2_sgi = false;
+		bool deactivated;
+
+		cpuid = val & GICH_LR_PHYSID_CPUID;
+		cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
+
+		if (model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+			intid = val & ICH_LR_VIRTUAL_ID_MASK;
+		} else {
+			intid = val & GICH_LR_VIRTUALID;
+			is_v2_sgi = vgic_irq_is_sgi(intid);
+		}
+
+		/* Notify fds when the guest EOI'ed a level-triggered IRQ */
+		if (lr_signals_eoi_mi(val) && vgic_valid_spi(vcpu->kvm, intid))
+			kvm_notify_acked_irq(vcpu->kvm, 0,
+					     intid - VGIC_NR_PRIVATE_IRQS);
+
+		irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
+		if (!irq)	/* An LPI could have been unmapped. */
+			continue;
+
+		raw_spin_lock(&irq->irq_lock);
+
+		/* Always preserve the active bit, note deactivation */
+		deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT);
+		irq->active = !!(val & ICH_LR_ACTIVE_BIT);
+
+		if (irq->active && is_v2_sgi)
+			irq->active_source = cpuid;
+
+		/* Edge is the only case where we preserve the pending bit */
+		if (irq->config == VGIC_CONFIG_EDGE &&
+		    (val & ICH_LR_PENDING_BIT)) {
+			irq->pending_latch = true;
+
+			if (is_v2_sgi)
+				irq->source |= (1 << cpuid);
+		}
+
+		/*
+		 * Clear soft pending state when level irqs have been acked.
+		 */
+		if (irq->config == VGIC_CONFIG_LEVEL && !(val & ICH_LR_STATE))
+			irq->pending_latch = false;
+
+		/* Handle resampling for mapped interrupts if required */
+		vgic_irq_handle_resampling(irq, deactivated, val & ICH_LR_PENDING_BIT);
+
+		raw_spin_unlock(&irq->irq_lock);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+
+	cpuif->used_lrs = 0;
+}
+
+/* Requires the irq to be locked already */
+void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
+{
+	u32 model = vcpu->kvm->arch.vgic.vgic_model;
+	u64 val = irq->intid;
+	bool allow_pending = true, is_v2_sgi;
+
+	is_v2_sgi = (vgic_irq_is_sgi(irq->intid) &&
+		     model == KVM_DEV_TYPE_ARM_VGIC_V2);
+
+	if (irq->active) {
+		val |= ICH_LR_ACTIVE_BIT;
+		if (is_v2_sgi)
+			val |= irq->active_source << GICH_LR_PHYSID_CPUID_SHIFT;
+		if (vgic_irq_is_multi_sgi(irq)) {
+			allow_pending = false;
+			val |= ICH_LR_EOI;
+		}
+	}
+
+	if (irq->hw && !vgic_irq_needs_resampling(irq)) {
+		val |= ICH_LR_HW;
+		val |= ((u64)irq->hwintid) << ICH_LR_PHYS_ID_SHIFT;
+		/*
+		 * Never set pending+active on a HW interrupt, as the
+		 * pending state is kept at the physical distributor
+		 * level.
+		 */
+		if (irq->active)
+			allow_pending = false;
+	} else {
+		if (irq->config == VGIC_CONFIG_LEVEL) {
+			val |= ICH_LR_EOI;
+
+			/*
+			 * Software resampling doesn't work very well
+			 * if we allow P+A, so let's not do that.
+			 */
+			if (irq->active)
+				allow_pending = false;
+		}
+	}
+
+	if (allow_pending && irq_is_pending(irq)) {
+		val |= ICH_LR_PENDING_BIT;
+
+		if (irq->config == VGIC_CONFIG_EDGE)
+			irq->pending_latch = false;
+
+		if (vgic_irq_is_sgi(irq->intid) &&
+		    model == KVM_DEV_TYPE_ARM_VGIC_V2) {
+			u32 src = ffs(irq->source);
+
+			if (WARN_RATELIMIT(!src, "No SGI source for INTID %d\n",
+					   irq->intid))
+				return;
+
+			val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
+			irq->source &= ~(1 << (src - 1));
+			if (irq->source) {
+				irq->pending_latch = true;
+				val |= ICH_LR_EOI;
+			}
+		}
+	}
+
+	/*
+	 * Level-triggered mapped IRQs are special because we only observe
+	 * rising edges as input to the VGIC.  We therefore lower the line
+	 * level here, so that we can take new virtual IRQs.  See
+	 * vgic_v3_fold_lr_state for more info.
+	 */
+	if (vgic_irq_is_mapped_level(irq) && (val & ICH_LR_PENDING_BIT))
+		irq->line_level = false;
+
+	if (irq->group)
+		val |= ICH_LR_GROUP;
+
+	val |= (u64)irq->priority << ICH_LR_PRIORITY_SHIFT;
+
+	vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = val;
+}
+
+void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr)
+{
+	vcpu->arch.vgic_cpu.vgic_v3.vgic_lr[lr] = 0;
+}
+
+void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+	u32 model = vcpu->kvm->arch.vgic.vgic_model;
+	u32 vmcr;
+
+	if (model == KVM_DEV_TYPE_ARM_VGIC_V2) {
+		vmcr = (vmcrp->ackctl << ICH_VMCR_ACK_CTL_SHIFT) &
+			ICH_VMCR_ACK_CTL_MASK;
+		vmcr |= (vmcrp->fiqen << ICH_VMCR_FIQ_EN_SHIFT) &
+			ICH_VMCR_FIQ_EN_MASK;
+	} else {
+		/*
+		 * When emulating GICv3 on GICv3 with SRE=1 on the
+		 * VFIQEn bit is RES1 and the VAckCtl bit is RES0.
+		 */
+		vmcr = ICH_VMCR_FIQ_EN_MASK;
+	}
+
+	vmcr |= (vmcrp->cbpr << ICH_VMCR_CBPR_SHIFT) & ICH_VMCR_CBPR_MASK;
+	vmcr |= (vmcrp->eoim << ICH_VMCR_EOIM_SHIFT) & ICH_VMCR_EOIM_MASK;
+	vmcr |= (vmcrp->abpr << ICH_VMCR_BPR1_SHIFT) & ICH_VMCR_BPR1_MASK;
+	vmcr |= (vmcrp->bpr << ICH_VMCR_BPR0_SHIFT) & ICH_VMCR_BPR0_MASK;
+	vmcr |= (vmcrp->pmr << ICH_VMCR_PMR_SHIFT) & ICH_VMCR_PMR_MASK;
+	vmcr |= (vmcrp->grpen0 << ICH_VMCR_ENG0_SHIFT) & ICH_VMCR_ENG0_MASK;
+	vmcr |= (vmcrp->grpen1 << ICH_VMCR_ENG1_SHIFT) & ICH_VMCR_ENG1_MASK;
+
+	cpu_if->vgic_vmcr = vmcr;
+}
+
+void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+	u32 model = vcpu->kvm->arch.vgic.vgic_model;
+	u32 vmcr;
+
+	vmcr = cpu_if->vgic_vmcr;
+
+	if (model == KVM_DEV_TYPE_ARM_VGIC_V2) {
+		vmcrp->ackctl = (vmcr & ICH_VMCR_ACK_CTL_MASK) >>
+			ICH_VMCR_ACK_CTL_SHIFT;
+		vmcrp->fiqen = (vmcr & ICH_VMCR_FIQ_EN_MASK) >>
+			ICH_VMCR_FIQ_EN_SHIFT;
+	} else {
+		/*
+		 * When emulating GICv3 on GICv3 with SRE=1 on the
+		 * VFIQEn bit is RES1 and the VAckCtl bit is RES0.
+		 */
+		vmcrp->fiqen = 1;
+		vmcrp->ackctl = 0;
+	}
+
+	vmcrp->cbpr = (vmcr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT;
+	vmcrp->eoim = (vmcr & ICH_VMCR_EOIM_MASK) >> ICH_VMCR_EOIM_SHIFT;
+	vmcrp->abpr = (vmcr & ICH_VMCR_BPR1_MASK) >> ICH_VMCR_BPR1_SHIFT;
+	vmcrp->bpr  = (vmcr & ICH_VMCR_BPR0_MASK) >> ICH_VMCR_BPR0_SHIFT;
+	vmcrp->pmr  = (vmcr & ICH_VMCR_PMR_MASK) >> ICH_VMCR_PMR_SHIFT;
+	vmcrp->grpen0 = (vmcr & ICH_VMCR_ENG0_MASK) >> ICH_VMCR_ENG0_SHIFT;
+	vmcrp->grpen1 = (vmcr & ICH_VMCR_ENG1_MASK) >> ICH_VMCR_ENG1_SHIFT;
+}
+
+#define INITIAL_PENDBASER_VALUE						  \
+	(GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RaWb)		| \
+	GIC_BASER_CACHEABILITY(GICR_PENDBASER, OUTER, SameAsInner)	| \
+	GIC_BASER_SHAREABILITY(GICR_PENDBASER, InnerShareable))
+
+void vgic_v3_enable(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *vgic_v3 = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	/*
+	 * By forcing VMCR to zero, the GIC will restore the binary
+	 * points to their reset values. Anything else resets to zero
+	 * anyway.
+	 */
+	vgic_v3->vgic_vmcr = 0;
+
+	/*
+	 * If we are emulating a GICv3, we do it in an non-GICv2-compatible
+	 * way, so we force SRE to 1 to demonstrate this to the guest.
+	 * Also, we don't support any form of IRQ/FIQ bypass.
+	 * This goes with the spec allowing the value to be RAO/WI.
+	 */
+	if (vcpu->kvm->arch.vgic.vgic_model == KVM_DEV_TYPE_ARM_VGIC_V3) {
+		vgic_v3->vgic_sre = (ICC_SRE_EL1_DIB |
+				     ICC_SRE_EL1_DFB |
+				     ICC_SRE_EL1_SRE);
+		vcpu->arch.vgic_cpu.pendbaser = INITIAL_PENDBASER_VALUE;
+	} else {
+		vgic_v3->vgic_sre = 0;
+	}
+
+	vcpu->arch.vgic_cpu.num_id_bits = (kvm_vgic_global_state.ich_vtr_el2 &
+					   ICH_VTR_ID_BITS_MASK) >>
+					   ICH_VTR_ID_BITS_SHIFT;
+	vcpu->arch.vgic_cpu.num_pri_bits = ((kvm_vgic_global_state.ich_vtr_el2 &
+					    ICH_VTR_PRI_BITS_MASK) >>
+					    ICH_VTR_PRI_BITS_SHIFT) + 1;
+
+	/* Get the show on the road... */
+	vgic_v3->vgic_hcr = ICH_HCR_EN;
+	if (group0_trap)
+		vgic_v3->vgic_hcr |= ICH_HCR_TALL0;
+	if (group1_trap)
+		vgic_v3->vgic_hcr |= ICH_HCR_TALL1;
+	if (common_trap)
+		vgic_v3->vgic_hcr |= ICH_HCR_TC;
+	if (dir_trap)
+		vgic_v3->vgic_hcr |= ICH_HCR_TDIR;
+}
+
+int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq)
+{
+	struct kvm_vcpu *vcpu;
+	int byte_offset, bit_nr;
+	gpa_t pendbase, ptr;
+	bool status;
+	u8 val;
+	int ret;
+	unsigned long flags;
+
+retry:
+	vcpu = irq->target_vcpu;
+	if (!vcpu)
+		return 0;
+
+	pendbase = GICR_PENDBASER_ADDRESS(vcpu->arch.vgic_cpu.pendbaser);
+
+	byte_offset = irq->intid / BITS_PER_BYTE;
+	bit_nr = irq->intid % BITS_PER_BYTE;
+	ptr = pendbase + byte_offset;
+
+	ret = kvm_read_guest_lock(kvm, ptr, &val, 1);
+	if (ret)
+		return ret;
+
+	status = val & (1 << bit_nr);
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	if (irq->target_vcpu != vcpu) {
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		goto retry;
+	}
+	irq->pending_latch = status;
+	vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
+
+	if (status) {
+		/* clear consumed data */
+		val &= ~(1 << bit_nr);
+		ret = vgic_write_guest_lock(kvm, ptr, &val, 1);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+/*
+ * The deactivation of the doorbell interrupt will trigger the
+ * unmapping of the associated vPE.
+ */
+static void unmap_all_vpes(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int i;
+
+	for (i = 0; i < dist->its_vm.nr_vpes; i++)
+		free_irq(dist->its_vm.vpes[i]->irq, kvm_get_vcpu(kvm, i));
+}
+
+static void map_all_vpes(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int i;
+
+	for (i = 0; i < dist->its_vm.nr_vpes; i++)
+		WARN_ON(vgic_v4_request_vpe_irq(kvm_get_vcpu(kvm, i),
+						dist->its_vm.vpes[i]->irq));
+}
+
+/**
+ * vgic_v3_save_pending_tables - Save the pending tables into guest RAM
+ * kvm lock and all vcpu lock must be held
+ */
+int vgic_v3_save_pending_tables(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_irq *irq;
+	gpa_t last_ptr = ~(gpa_t)0;
+	bool vlpi_avail = false;
+	int ret = 0;
+	u8 val;
+
+	if (unlikely(!vgic_initialized(kvm)))
+		return -ENXIO;
+
+	/*
+	 * A preparation for getting any VLPI states.
+	 * The above vgic initialized check also ensures that the allocation
+	 * and enabling of the doorbells have already been done.
+	 */
+	if (kvm_vgic_global_state.has_gicv4_1) {
+		unmap_all_vpes(kvm);
+		vlpi_avail = true;
+	}
+
+	list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
+		int byte_offset, bit_nr;
+		struct kvm_vcpu *vcpu;
+		gpa_t pendbase, ptr;
+		bool is_pending;
+		bool stored;
+
+		vcpu = irq->target_vcpu;
+		if (!vcpu)
+			continue;
+
+		pendbase = GICR_PENDBASER_ADDRESS(vcpu->arch.vgic_cpu.pendbaser);
+
+		byte_offset = irq->intid / BITS_PER_BYTE;
+		bit_nr = irq->intid % BITS_PER_BYTE;
+		ptr = pendbase + byte_offset;
+
+		if (ptr != last_ptr) {
+			ret = kvm_read_guest_lock(kvm, ptr, &val, 1);
+			if (ret)
+				goto out;
+			last_ptr = ptr;
+		}
+
+		stored = val & (1U << bit_nr);
+
+		is_pending = irq->pending_latch;
+
+		if (irq->hw && vlpi_avail)
+			vgic_v4_get_vlpi_state(irq, &is_pending);
+
+		if (stored == is_pending)
+			continue;
+
+		if (is_pending)
+			val |= 1 << bit_nr;
+		else
+			val &= ~(1 << bit_nr);
+
+		ret = vgic_write_guest_lock(kvm, ptr, &val, 1);
+		if (ret)
+			goto out;
+	}
+
+out:
+	if (vlpi_avail)
+		map_all_vpes(kvm);
+
+	return ret;
+}
+
+/**
+ * vgic_v3_rdist_overlap - check if a region overlaps with any
+ * existing redistributor region
+ *
+ * @kvm: kvm handle
+ * @base: base of the region
+ * @size: size of region
+ *
+ * Return: true if there is an overlap
+ */
+bool vgic_v3_rdist_overlap(struct kvm *kvm, gpa_t base, size_t size)
+{
+	struct vgic_dist *d = &kvm->arch.vgic;
+	struct vgic_redist_region *rdreg;
+
+	list_for_each_entry(rdreg, &d->rd_regions, list) {
+		if ((base + size > rdreg->base) &&
+			(base < rdreg->base + vgic_v3_rd_region_size(kvm, rdreg)))
+			return true;
+	}
+	return false;
+}
+
+/*
+ * Check for overlapping regions and for regions crossing the end of memory
+ * for base addresses which have already been set.
+ */
+bool vgic_v3_check_base(struct kvm *kvm)
+{
+	struct vgic_dist *d = &kvm->arch.vgic;
+	struct vgic_redist_region *rdreg;
+
+	if (!IS_VGIC_ADDR_UNDEF(d->vgic_dist_base) &&
+	    d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE < d->vgic_dist_base)
+		return false;
+
+	list_for_each_entry(rdreg, &d->rd_regions, list) {
+		size_t sz = vgic_v3_rd_region_size(kvm, rdreg);
+
+		if (vgic_check_iorange(kvm, VGIC_ADDR_UNDEF,
+				       rdreg->base, SZ_64K, sz))
+			return false;
+	}
+
+	if (IS_VGIC_ADDR_UNDEF(d->vgic_dist_base))
+		return true;
+
+	return !vgic_v3_rdist_overlap(kvm, d->vgic_dist_base,
+				      KVM_VGIC_V3_DIST_SIZE);
+}
+
+/**
+ * vgic_v3_rdist_free_slot - Look up registered rdist regions and identify one
+ * which has free space to put a new rdist region.
+ *
+ * @rd_regions: redistributor region list head
+ *
+ * A redistributor regions maps n redistributors, n = region size / (2 x 64kB).
+ * Stride between redistributors is 0 and regions are filled in the index order.
+ *
+ * Return: the redist region handle, if any, that has space to map a new rdist
+ * region.
+ */
+struct vgic_redist_region *vgic_v3_rdist_free_slot(struct list_head *rd_regions)
+{
+	struct vgic_redist_region *rdreg;
+
+	list_for_each_entry(rdreg, rd_regions, list) {
+		if (!vgic_v3_redist_region_full(rdreg))
+			return rdreg;
+	}
+	return NULL;
+}
+
+struct vgic_redist_region *vgic_v3_rdist_region_from_index(struct kvm *kvm,
+							   u32 index)
+{
+	struct list_head *rd_regions = &kvm->arch.vgic.rd_regions;
+	struct vgic_redist_region *rdreg;
+
+	list_for_each_entry(rdreg, rd_regions, list) {
+		if (rdreg->index == index)
+			return rdreg;
+	}
+	return NULL;
+}
+
+
+int vgic_v3_map_resources(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu;
+	unsigned long c;
+
+	kvm_for_each_vcpu(c, vcpu, kvm) {
+		struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+
+		if (IS_VGIC_ADDR_UNDEF(vgic_cpu->rd_iodev.base_addr)) {
+			kvm_debug("vcpu %ld redistributor base not set\n", c);
+			return -ENXIO;
+		}
+	}
+
+	if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base)) {
+		kvm_debug("Need to set vgic distributor addresses first\n");
+		return -ENXIO;
+	}
+
+	if (!vgic_v3_check_base(kvm)) {
+		kvm_debug("VGIC redist and dist frames overlap\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * For a VGICv3 we require the userland to explicitly initialize
+	 * the VGIC before we need to use it.
+	 */
+	if (!vgic_initialized(kvm)) {
+		return -EBUSY;
+	}
+
+	if (kvm_vgic_global_state.has_gicv4_1)
+		vgic_v4_configure_vsgis(kvm);
+
+	return 0;
+}
+
+DEFINE_STATIC_KEY_FALSE(vgic_v3_cpuif_trap);
+
+static int __init early_group0_trap_cfg(char *buf)
+{
+	return kstrtobool(buf, &group0_trap);
+}
+early_param("kvm-arm.vgic_v3_group0_trap", early_group0_trap_cfg);
+
+static int __init early_group1_trap_cfg(char *buf)
+{
+	return kstrtobool(buf, &group1_trap);
+}
+early_param("kvm-arm.vgic_v3_group1_trap", early_group1_trap_cfg);
+
+static int __init early_common_trap_cfg(char *buf)
+{
+	return kstrtobool(buf, &common_trap);
+}
+early_param("kvm-arm.vgic_v3_common_trap", early_common_trap_cfg);
+
+static int __init early_gicv4_enable(char *buf)
+{
+	return kstrtobool(buf, &gicv4_enable);
+}
+early_param("kvm-arm.vgic_v4_enable", early_gicv4_enable);
+
+static const struct midr_range broken_seis[] = {
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_ICESTORM_MAX),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M1_FIRESTORM_MAX),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_PRO),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_BLIZZARD_MAX),
+	MIDR_ALL_VERSIONS(MIDR_APPLE_M2_AVALANCHE_MAX),
+	{},
+};
+
+static bool vgic_v3_broken_seis(void)
+{
+	return ((kvm_vgic_global_state.ich_vtr_el2 & ICH_VTR_SEIS_MASK) &&
+		is_midr_in_range_list(read_cpuid_id(), broken_seis));
+}
+
+/**
+ * vgic_v3_probe - probe for a VGICv3 compatible interrupt controller
+ * @info:	pointer to the GIC description
+ *
+ * Returns 0 if the VGICv3 has been probed successfully, returns an error code
+ * otherwise
+ */
+int vgic_v3_probe(const struct gic_kvm_info *info)
+{
+	u64 ich_vtr_el2 = kvm_call_hyp_ret(__vgic_v3_get_gic_config);
+	bool has_v2;
+	int ret;
+
+	has_v2 = ich_vtr_el2 >> 63;
+	ich_vtr_el2 = (u32)ich_vtr_el2;
+
+	/*
+	 * The ListRegs field is 5 bits, but there is an architectural
+	 * maximum of 16 list registers. Just ignore bit 4...
+	 */
+	kvm_vgic_global_state.nr_lr = (ich_vtr_el2 & 0xf) + 1;
+	kvm_vgic_global_state.can_emulate_gicv2 = false;
+	kvm_vgic_global_state.ich_vtr_el2 = ich_vtr_el2;
+
+	/* GICv4 support? */
+	if (info->has_v4) {
+		kvm_vgic_global_state.has_gicv4 = gicv4_enable;
+		kvm_vgic_global_state.has_gicv4_1 = info->has_v4_1 && gicv4_enable;
+		kvm_info("GICv4%s support %sabled\n",
+			 kvm_vgic_global_state.has_gicv4_1 ? ".1" : "",
+			 gicv4_enable ? "en" : "dis");
+	}
+
+	kvm_vgic_global_state.vcpu_base = 0;
+
+	if (!info->vcpu.start) {
+		kvm_info("GICv3: no GICV resource entry\n");
+	} else if (!has_v2) {
+		pr_warn(FW_BUG "CPU interface incapable of MMIO access\n");
+	} else if (!PAGE_ALIGNED(info->vcpu.start)) {
+		pr_warn("GICV physical address 0x%llx not page aligned\n",
+			(unsigned long long)info->vcpu.start);
+	} else if (kvm_get_mode() != KVM_MODE_PROTECTED) {
+		kvm_vgic_global_state.vcpu_base = info->vcpu.start;
+		kvm_vgic_global_state.can_emulate_gicv2 = true;
+		ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2);
+		if (ret) {
+			kvm_err("Cannot register GICv2 KVM device.\n");
+			return ret;
+		}
+		kvm_info("vgic-v2@%llx\n", info->vcpu.start);
+	}
+	ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V3);
+	if (ret) {
+		kvm_err("Cannot register GICv3 KVM device.\n");
+		kvm_unregister_device_ops(KVM_DEV_TYPE_ARM_VGIC_V2);
+		return ret;
+	}
+
+	if (kvm_vgic_global_state.vcpu_base == 0)
+		kvm_info("disabling GICv2 emulation\n");
+
+	if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_30115)) {
+		group0_trap = true;
+		group1_trap = true;
+	}
+
+	if (vgic_v3_broken_seis()) {
+		kvm_info("GICv3 with broken locally generated SEI\n");
+
+		kvm_vgic_global_state.ich_vtr_el2 &= ~ICH_VTR_SEIS_MASK;
+		group0_trap = true;
+		group1_trap = true;
+		if (ich_vtr_el2 & ICH_VTR_TDS_MASK)
+			dir_trap = true;
+		else
+			common_trap = true;
+	}
+
+	if (group0_trap || group1_trap || common_trap | dir_trap) {
+		kvm_info("GICv3 sysreg trapping enabled ([%s%s%s%s], reduced performance)\n",
+			 group0_trap ? "G0" : "",
+			 group1_trap ? "G1" : "",
+			 common_trap ? "C"  : "",
+			 dir_trap    ? "D"  : "");
+		static_branch_enable(&vgic_v3_cpuif_trap);
+	}
+
+	kvm_vgic_global_state.vctrl_base = NULL;
+	kvm_vgic_global_state.type = VGIC_V3;
+	kvm_vgic_global_state.max_gic_vcpus = VGIC_V3_MAX_CPUS;
+
+	return 0;
+}
+
+void vgic_v3_load(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	/*
+	 * If dealing with a GICv2 emulation on GICv3, VMCR_EL2.VFIQen
+	 * is dependent on ICC_SRE_EL1.SRE, and we have to perform the
+	 * VMCR_EL2 save/restore in the world switch.
+	 */
+	if (likely(cpu_if->vgic_sre))
+		kvm_call_hyp(__vgic_v3_write_vmcr, cpu_if->vgic_vmcr);
+
+	kvm_call_hyp(__vgic_v3_restore_aprs, cpu_if);
+
+	if (has_vhe())
+		__vgic_v3_activate_traps(cpu_if);
+
+	WARN_ON(vgic_v4_load(vcpu));
+}
+
+void vgic_v3_vmcr_sync(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	if (likely(cpu_if->vgic_sre))
+		cpu_if->vgic_vmcr = kvm_call_hyp_ret(__vgic_v3_read_vmcr);
+}
+
+void vgic_v3_put(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+
+	WARN_ON(vgic_v4_put(vcpu));
+
+	vgic_v3_vmcr_sync(vcpu);
+
+	kvm_call_hyp(__vgic_v3_save_aprs, cpu_if);
+
+	if (has_vhe())
+		__vgic_v3_deactivate_traps(cpu_if);
+}
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
new file mode 100644
index 000000000..339a55194
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -0,0 +1,521 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kvm_host.h>
+#include <linux/irqchip/arm-gic-v3.h>
+
+#include "vgic.h"
+
+/*
+ * How KVM uses GICv4 (insert rude comments here):
+ *
+ * The vgic-v4 layer acts as a bridge between several entities:
+ * - The GICv4 ITS representation offered by the ITS driver
+ * - VFIO, which is in charge of the PCI endpoint
+ * - The virtual ITS, which is the only thing the guest sees
+ *
+ * The configuration of VLPIs is triggered by a callback from VFIO,
+ * instructing KVM that a PCI device has been configured to deliver
+ * MSIs to a vITS.
+ *
+ * kvm_vgic_v4_set_forwarding() is thus called with the routing entry,
+ * and this is used to find the corresponding vITS data structures
+ * (ITS instance, device, event and irq) using a process that is
+ * extremely similar to the injection of an MSI.
+ *
+ * At this stage, we can link the guest's view of an LPI (uniquely
+ * identified by the routing entry) and the host irq, using the GICv4
+ * driver mapping operation. Should the mapping succeed, we've then
+ * successfully upgraded the guest's LPI to a VLPI. We can then start
+ * with updating GICv4's view of the property table and generating an
+ * INValidation in order to kickstart the delivery of this VLPI to the
+ * guest directly, without software intervention. Well, almost.
+ *
+ * When the PCI endpoint is deconfigured, this operation is reversed
+ * with VFIO calling kvm_vgic_v4_unset_forwarding().
+ *
+ * Once the VLPI has been mapped, it needs to follow any change the
+ * guest performs on its LPI through the vITS. For that, a number of
+ * command handlers have hooks to communicate these changes to the HW:
+ * - Any invalidation triggers a call to its_prop_update_vlpi()
+ * - The INT command results in a irq_set_irqchip_state(), which
+ *   generates an INT on the corresponding VLPI.
+ * - The CLEAR command results in a irq_set_irqchip_state(), which
+ *   generates an CLEAR on the corresponding VLPI.
+ * - DISCARD translates into an unmap, similar to a call to
+ *   kvm_vgic_v4_unset_forwarding().
+ * - MOVI is translated by an update of the existing mapping, changing
+ *   the target vcpu, resulting in a VMOVI being generated.
+ * - MOVALL is translated by a string of mapping updates (similar to
+ *   the handling of MOVI). MOVALL is horrible.
+ *
+ * Note that a DISCARD/MAPTI sequence emitted from the guest without
+ * reprogramming the PCI endpoint after MAPTI does not result in a
+ * VLPI being mapped, as there is no callback from VFIO (the guest
+ * will get the interrupt via the normal SW injection). Fixing this is
+ * not trivial, and requires some horrible messing with the VFIO
+ * internals. Not fun. Don't do that.
+ *
+ * Then there is the scheduling. Each time a vcpu is about to run on a
+ * physical CPU, KVM must tell the corresponding redistributor about
+ * it. And if we've migrated our vcpu from one CPU to another, we must
+ * tell the ITS (so that the messages reach the right redistributor).
+ * This is done in two steps: first issue a irq_set_affinity() on the
+ * irq corresponding to the vcpu, then call its_make_vpe_resident().
+ * You must be in a non-preemptible context. On exit, a call to
+ * its_make_vpe_non_resident() tells the redistributor that we're done
+ * with the vcpu.
+ *
+ * Finally, the doorbell handling: Each vcpu is allocated an interrupt
+ * which will fire each time a VLPI is made pending whilst the vcpu is
+ * not running. Each time the vcpu gets blocked, the doorbell
+ * interrupt gets enabled. When the vcpu is unblocked (for whatever
+ * reason), the doorbell interrupt is disabled.
+ */
+
+#define DB_IRQ_FLAGS	(IRQ_NOAUTOEN | IRQ_DISABLE_UNLAZY | IRQ_NO_BALANCING)
+
+static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
+{
+	struct kvm_vcpu *vcpu = info;
+
+	/* We got the message, no need to fire again */
+	if (!kvm_vgic_global_state.has_gicv4_1 &&
+	    !irqd_irq_disabled(&irq_to_desc(irq)->irq_data))
+		disable_irq_nosync(irq);
+
+	/*
+	 * The v4.1 doorbell can fire concurrently with the vPE being
+	 * made non-resident. Ensure we only update pending_last
+	 * *after* the non-residency sequence has completed.
+	 */
+	raw_spin_lock(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vpe_lock);
+	vcpu->arch.vgic_cpu.vgic_v3.its_vpe.pending_last = true;
+	raw_spin_unlock(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vpe_lock);
+
+	kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+	kvm_vcpu_kick(vcpu);
+
+	return IRQ_HANDLED;
+}
+
+static void vgic_v4_sync_sgi_config(struct its_vpe *vpe, struct vgic_irq *irq)
+{
+	vpe->sgi_config[irq->intid].enabled	= irq->enabled;
+	vpe->sgi_config[irq->intid].group 	= irq->group;
+	vpe->sgi_config[irq->intid].priority	= irq->priority;
+}
+
+static void vgic_v4_enable_vsgis(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	int i;
+
+	/*
+	 * With GICv4.1, every virtual SGI can be directly injected. So
+	 * let's pretend that they are HW interrupts, tied to a host
+	 * IRQ. The SGI code will do its magic.
+	 */
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		unsigned long flags;
+		int ret;
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		if (irq->hw)
+			goto unlock;
+
+		irq->hw = true;
+		irq->host_irq = irq_find_mapping(vpe->sgi_domain, i);
+
+		/* Transfer the full irq state to the vPE */
+		vgic_v4_sync_sgi_config(vpe, irq);
+		desc = irq_to_desc(irq->host_irq);
+		ret = irq_domain_activate_irq(irq_desc_get_irq_data(desc),
+					      false);
+		if (!WARN_ON(ret)) {
+			/* Transfer pending state */
+			ret = irq_set_irqchip_state(irq->host_irq,
+						    IRQCHIP_STATE_PENDING,
+						    irq->pending_latch);
+			WARN_ON(ret);
+			irq->pending_latch = false;
+		}
+	unlock:
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+static void vgic_v4_disable_vsgis(struct kvm_vcpu *vcpu)
+{
+	int i;
+
+	for (i = 0; i < VGIC_NR_SGIS; i++) {
+		struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, i);
+		struct irq_desc *desc;
+		unsigned long flags;
+		int ret;
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+		if (!irq->hw)
+			goto unlock;
+
+		irq->hw = false;
+		ret = irq_get_irqchip_state(irq->host_irq,
+					    IRQCHIP_STATE_PENDING,
+					    &irq->pending_latch);
+		WARN_ON(ret);
+
+		desc = irq_to_desc(irq->host_irq);
+		irq_domain_deactivate_irq(irq_desc_get_irq_data(desc));
+	unlock:
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(vcpu->kvm, irq);
+	}
+}
+
+void vgic_v4_configure_vsgis(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	kvm_arm_halt_guest(kvm);
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (dist->nassgireq)
+			vgic_v4_enable_vsgis(vcpu);
+		else
+			vgic_v4_disable_vsgis(vcpu);
+	}
+
+	kvm_arm_resume_guest(kvm);
+}
+
+/*
+ * Must be called with GICv4.1 and the vPE unmapped, which
+ * indicates the invalidation of any VPT caches associated
+ * with the vPE, thus we can get the VLPI state by peeking
+ * at the VPT.
+ */
+void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val)
+{
+	struct its_vpe *vpe = &irq->target_vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	int mask = BIT(irq->intid % BITS_PER_BYTE);
+	void *va;
+	u8 *ptr;
+
+	va = page_address(vpe->vpt_page);
+	ptr = va + irq->intid / BITS_PER_BYTE;
+
+	*val = !!(*ptr & mask);
+}
+
+int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq)
+{
+	return request_irq(irq, vgic_v4_doorbell_handler, 0, "vcpu", vcpu);
+}
+
+/**
+ * vgic_v4_init - Initialize the GICv4 data structures
+ * @kvm:	Pointer to the VM being initialized
+ *
+ * We may be called each time a vITS is created, or when the
+ * vgic is initialized. In both cases, the number of vcpus
+ * should now be fixed.
+ */
+int vgic_v4_init(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct kvm_vcpu *vcpu;
+	int nr_vcpus, ret;
+	unsigned long i;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	if (!kvm_vgic_global_state.has_gicv4)
+		return 0; /* Nothing to see here... move along. */
+
+	if (dist->its_vm.vpes)
+		return 0;
+
+	nr_vcpus = atomic_read(&kvm->online_vcpus);
+
+	dist->its_vm.vpes = kcalloc(nr_vcpus, sizeof(*dist->its_vm.vpes),
+				    GFP_KERNEL_ACCOUNT);
+	if (!dist->its_vm.vpes)
+		return -ENOMEM;
+
+	dist->its_vm.nr_vpes = nr_vcpus;
+
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		dist->its_vm.vpes[i] = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+
+	ret = its_alloc_vcpu_irqs(&dist->its_vm);
+	if (ret < 0) {
+		kvm_err("VPE IRQ allocation failure\n");
+		kfree(dist->its_vm.vpes);
+		dist->its_vm.nr_vpes = 0;
+		dist->its_vm.vpes = NULL;
+		return ret;
+	}
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		int irq = dist->its_vm.vpes[i]->irq;
+		unsigned long irq_flags = DB_IRQ_FLAGS;
+
+		/*
+		 * Don't automatically enable the doorbell, as we're
+		 * flipping it back and forth when the vcpu gets
+		 * blocked. Also disable the lazy disabling, as the
+		 * doorbell could kick us out of the guest too
+		 * early...
+		 *
+		 * On GICv4.1, the doorbell is managed in HW and must
+		 * be left enabled.
+		 */
+		if (kvm_vgic_global_state.has_gicv4_1)
+			irq_flags &= ~IRQ_NOAUTOEN;
+		irq_set_status_flags(irq, irq_flags);
+
+		ret = vgic_v4_request_vpe_irq(vcpu, irq);
+		if (ret) {
+			kvm_err("failed to allocate vcpu IRQ%d\n", irq);
+			/*
+			 * Trick: adjust the number of vpes so we know
+			 * how many to nuke on teardown...
+			 */
+			dist->its_vm.nr_vpes = i;
+			break;
+		}
+	}
+
+	if (ret)
+		vgic_v4_teardown(kvm);
+
+	return ret;
+}
+
+/**
+ * vgic_v4_teardown - Free the GICv4 data structures
+ * @kvm:	Pointer to the VM being destroyed
+ */
+void vgic_v4_teardown(struct kvm *kvm)
+{
+	struct its_vm *its_vm = &kvm->arch.vgic.its_vm;
+	int i;
+
+	lockdep_assert_held(&kvm->arch.config_lock);
+
+	if (!its_vm->vpes)
+		return;
+
+	for (i = 0; i < its_vm->nr_vpes; i++) {
+		struct kvm_vcpu *vcpu = kvm_get_vcpu(kvm, i);
+		int irq = its_vm->vpes[i]->irq;
+
+		irq_clear_status_flags(irq, DB_IRQ_FLAGS);
+		free_irq(irq, vcpu);
+	}
+
+	its_free_vcpu_irqs(its_vm);
+	kfree(its_vm->vpes);
+	its_vm->nr_vpes = 0;
+	its_vm->vpes = NULL;
+}
+
+int vgic_v4_put(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+
+	if (!vgic_supports_direct_msis(vcpu->kvm) || !vpe->resident)
+		return 0;
+
+	return its_make_vpe_non_resident(vpe, !!vcpu_get_flag(vcpu, IN_WFI));
+}
+
+int vgic_v4_load(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+	int err;
+
+	if (!vgic_supports_direct_msis(vcpu->kvm) || vpe->resident)
+		return 0;
+
+	if (vcpu_get_flag(vcpu, IN_WFI))
+		return 0;
+
+	/*
+	 * Before making the VPE resident, make sure the redistributor
+	 * corresponding to our current CPU expects us here. See the
+	 * doc in drivers/irqchip/irq-gic-v4.c to understand how this
+	 * turns into a VMOVP command at the ITS level.
+	 */
+	err = irq_set_affinity(vpe->irq, cpumask_of(smp_processor_id()));
+	if (err)
+		return err;
+
+	err = its_make_vpe_resident(vpe, false, vcpu->kvm->arch.vgic.enabled);
+	if (err)
+		return err;
+
+	/*
+	 * Now that the VPE is resident, let's get rid of a potential
+	 * doorbell interrupt that would still be pending. This is a
+	 * GICv4.0 only "feature"...
+	 */
+	if (!kvm_vgic_global_state.has_gicv4_1)
+		err = irq_set_irqchip_state(vpe->irq, IRQCHIP_STATE_PENDING, false);
+
+	return err;
+}
+
+void vgic_v4_commit(struct kvm_vcpu *vcpu)
+{
+	struct its_vpe *vpe = &vcpu->arch.vgic_cpu.vgic_v3.its_vpe;
+
+	/*
+	 * No need to wait for the vPE to be ready across a shallow guest
+	 * exit, as only a vcpu_put will invalidate it.
+	 */
+	if (!vpe->ready)
+		its_commit_vpe(vpe);
+}
+
+static struct vgic_its *vgic_get_its(struct kvm *kvm,
+				     struct kvm_kernel_irq_routing_entry *irq_entry)
+{
+	struct kvm_msi msi  = (struct kvm_msi) {
+		.address_lo	= irq_entry->msi.address_lo,
+		.address_hi	= irq_entry->msi.address_hi,
+		.data		= irq_entry->msi.data,
+		.flags		= irq_entry->msi.flags,
+		.devid		= irq_entry->msi.devid,
+	};
+
+	return vgic_msi_to_its(kvm, &msi);
+}
+
+int kvm_vgic_v4_set_forwarding(struct kvm *kvm, int virq,
+			       struct kvm_kernel_irq_routing_entry *irq_entry)
+{
+	struct vgic_its *its;
+	struct vgic_irq *irq;
+	struct its_vlpi_map map;
+	unsigned long flags;
+	int ret;
+
+	if (!vgic_supports_direct_msis(kvm))
+		return 0;
+
+	/*
+	 * Get the ITS, and escape early on error (not a valid
+	 * doorbell for any of our vITSs).
+	 */
+	its = vgic_get_its(kvm, irq_entry);
+	if (IS_ERR(its))
+		return 0;
+
+	mutex_lock(&its->its_lock);
+
+	/* Perform the actual DevID/EventID -> LPI translation. */
+	ret = vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
+				   irq_entry->msi.data, &irq);
+	if (ret)
+		goto out;
+
+	/*
+	 * Emit the mapping request. If it fails, the ITS probably
+	 * isn't v4 compatible, so let's silently bail out. Holding
+	 * the ITS lock should ensure that nothing can modify the
+	 * target vcpu.
+	 */
+	map = (struct its_vlpi_map) {
+		.vm		= &kvm->arch.vgic.its_vm,
+		.vpe		= &irq->target_vcpu->arch.vgic_cpu.vgic_v3.its_vpe,
+		.vintid		= irq->intid,
+		.properties	= ((irq->priority & 0xfc) |
+				   (irq->enabled ? LPI_PROP_ENABLED : 0) |
+				   LPI_PROP_GROUP1),
+		.db_enabled	= true,
+	};
+
+	ret = its_map_vlpi(virq, &map);
+	if (ret)
+		goto out;
+
+	irq->hw		= true;
+	irq->host_irq	= virq;
+	atomic_inc(&map.vpe->vlpi_count);
+
+	/* Transfer pending state */
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	if (irq->pending_latch) {
+		ret = irq_set_irqchip_state(irq->host_irq,
+					    IRQCHIP_STATE_PENDING,
+					    irq->pending_latch);
+		WARN_RATELIMIT(ret, "IRQ %d", irq->host_irq);
+
+		/*
+		 * Clear pending_latch and communicate this state
+		 * change via vgic_queue_irq_unlock.
+		 */
+		irq->pending_latch = false;
+		vgic_queue_irq_unlock(kvm, irq, flags);
+	} else {
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	}
+
+out:
+	mutex_unlock(&its->its_lock);
+	return ret;
+}
+
+int kvm_vgic_v4_unset_forwarding(struct kvm *kvm, int virq,
+				 struct kvm_kernel_irq_routing_entry *irq_entry)
+{
+	struct vgic_its *its;
+	struct vgic_irq *irq;
+	int ret;
+
+	if (!vgic_supports_direct_msis(kvm))
+		return 0;
+
+	/*
+	 * Get the ITS, and escape early on error (not a valid
+	 * doorbell for any of our vITSs).
+	 */
+	its = vgic_get_its(kvm, irq_entry);
+	if (IS_ERR(its))
+		return 0;
+
+	mutex_lock(&its->its_lock);
+
+	ret = vgic_its_resolve_lpi(kvm, its, irq_entry->msi.devid,
+				   irq_entry->msi.data, &irq);
+	if (ret)
+		goto out;
+
+	WARN_ON(!(irq->hw && irq->host_irq == virq));
+	if (irq->hw) {
+		atomic_dec(&irq->target_vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vlpi_count);
+		irq->hw = false;
+		ret = its_unmap_vlpi(virq);
+	}
+
+out:
+	mutex_unlock(&its->its_lock);
+	return ret;
+}
diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c
new file mode 100644
index 000000000..8be4c1ebd
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic.c
@@ -0,0 +1,1078 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/list_sort.h>
+#include <linux/nospec.h>
+
+#include <asm/kvm_hyp.h>
+
+#include "vgic.h"
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+struct vgic_global kvm_vgic_global_state __ro_after_init = {
+	.gicv3_cpuif = STATIC_KEY_FALSE_INIT,
+};
+
+/*
+ * Locking order is always:
+ * kvm->lock (mutex)
+ *   vcpu->mutex (mutex)
+ *     kvm->arch.config_lock (mutex)
+ *       its->cmd_lock (mutex)
+ *         its->its_lock (mutex)
+ *           vgic_cpu->ap_list_lock		must be taken with IRQs disabled
+ *             kvm->lpi_list_lock		must be taken with IRQs disabled
+ *               vgic_irq->irq_lock		must be taken with IRQs disabled
+ *
+ * As the ap_list_lock might be taken from the timer interrupt handler,
+ * we have to disable IRQs before taking this lock and everything lower
+ * than it.
+ *
+ * If you need to take multiple locks, always take the upper lock first,
+ * then the lower ones, e.g. first take the its_lock, then the irq_lock.
+ * If you are already holding a lock and need to take a higher one, you
+ * have to drop the lower ranking lock first and re-acquire it after having
+ * taken the upper one.
+ *
+ * When taking more than one ap_list_lock at the same time, always take the
+ * lowest numbered VCPU's ap_list_lock first, so:
+ *   vcpuX->vcpu_id < vcpuY->vcpu_id:
+ *     raw_spin_lock(vcpuX->arch.vgic_cpu.ap_list_lock);
+ *     raw_spin_lock(vcpuY->arch.vgic_cpu.ap_list_lock);
+ *
+ * Since the VGIC must support injecting virtual interrupts from ISRs, we have
+ * to use the raw_spin_lock_irqsave/raw_spin_unlock_irqrestore versions of outer
+ * spinlocks for any lock that may be taken while injecting an interrupt.
+ */
+
+/*
+ * Iterate over the VM's list of mapped LPIs to find the one with a
+ * matching interrupt ID and return a reference to the IRQ structure.
+ */
+static struct vgic_irq *vgic_get_lpi(struct kvm *kvm, u32 intid)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	struct vgic_irq *irq = NULL;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+
+	list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
+		if (irq->intid != intid)
+			continue;
+
+		/*
+		 * This increases the refcount, the caller is expected to
+		 * call vgic_put_irq() later once it's finished with the IRQ.
+		 */
+		vgic_get_irq_kref(irq);
+		goto out_unlock;
+	}
+	irq = NULL;
+
+out_unlock:
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+
+	return irq;
+}
+
+/*
+ * This looks up the virtual interrupt ID to get the corresponding
+ * struct vgic_irq. It also increases the refcount, so any caller is expected
+ * to call vgic_put_irq() once it's finished with this IRQ.
+ */
+struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
+			      u32 intid)
+{
+	/* SGIs and PPIs */
+	if (intid <= VGIC_MAX_PRIVATE) {
+		intid = array_index_nospec(intid, VGIC_MAX_PRIVATE + 1);
+		return &vcpu->arch.vgic_cpu.private_irqs[intid];
+	}
+
+	/* SPIs */
+	if (intid < (kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS)) {
+		intid = array_index_nospec(intid, kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS);
+		return &kvm->arch.vgic.spis[intid - VGIC_NR_PRIVATE_IRQS];
+	}
+
+	/* LPIs */
+	if (intid >= VGIC_MIN_LPI)
+		return vgic_get_lpi(kvm, intid);
+
+	return NULL;
+}
+
+/*
+ * We can't do anything in here, because we lack the kvm pointer to
+ * lock and remove the item from the lpi_list. So we keep this function
+ * empty and use the return value of kref_put() to trigger the freeing.
+ */
+static void vgic_irq_release(struct kref *ref)
+{
+}
+
+/*
+ * Drop the refcount on the LPI. Must be called with lpi_list_lock held.
+ */
+void __vgic_put_lpi_locked(struct kvm *kvm, struct vgic_irq *irq)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+
+	if (!kref_put(&irq->refcount, vgic_irq_release))
+		return;
+
+	list_del(&irq->lpi_list);
+	dist->lpi_list_count--;
+
+	kfree(irq);
+}
+
+void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned long flags;
+
+	if (irq->intid < VGIC_MIN_LPI)
+		return;
+
+	raw_spin_lock_irqsave(&dist->lpi_list_lock, flags);
+	__vgic_put_lpi_locked(kvm, irq);
+	raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags);
+}
+
+void vgic_flush_pending_lpis(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_irq *irq, *tmp;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&vgic_cpu->ap_list_lock, flags);
+
+	list_for_each_entry_safe(irq, tmp, &vgic_cpu->ap_list_head, ap_list) {
+		if (irq->intid >= VGIC_MIN_LPI) {
+			raw_spin_lock(&irq->irq_lock);
+			list_del(&irq->ap_list);
+			irq->vcpu = NULL;
+			raw_spin_unlock(&irq->irq_lock);
+			vgic_put_irq(vcpu->kvm, irq);
+		}
+	}
+
+	raw_spin_unlock_irqrestore(&vgic_cpu->ap_list_lock, flags);
+}
+
+void vgic_irq_set_phys_pending(struct vgic_irq *irq, bool pending)
+{
+	WARN_ON(irq_set_irqchip_state(irq->host_irq,
+				      IRQCHIP_STATE_PENDING,
+				      pending));
+}
+
+bool vgic_get_phys_line_level(struct vgic_irq *irq)
+{
+	bool line_level;
+
+	BUG_ON(!irq->hw);
+
+	if (irq->ops && irq->ops->get_input_level)
+		return irq->ops->get_input_level(irq->intid);
+
+	WARN_ON(irq_get_irqchip_state(irq->host_irq,
+				      IRQCHIP_STATE_PENDING,
+				      &line_level));
+	return line_level;
+}
+
+/* Set/Clear the physical active state */
+void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active)
+{
+
+	BUG_ON(!irq->hw);
+	WARN_ON(irq_set_irqchip_state(irq->host_irq,
+				      IRQCHIP_STATE_ACTIVE,
+				      active));
+}
+
+/**
+ * kvm_vgic_target_oracle - compute the target vcpu for an irq
+ *
+ * @irq:	The irq to route. Must be already locked.
+ *
+ * Based on the current state of the interrupt (enabled, pending,
+ * active, vcpu and target_vcpu), compute the next vcpu this should be
+ * given to. Return NULL if this shouldn't be injected at all.
+ *
+ * Requires the IRQ lock to be held.
+ */
+static struct kvm_vcpu *vgic_target_oracle(struct vgic_irq *irq)
+{
+	lockdep_assert_held(&irq->irq_lock);
+
+	/* If the interrupt is active, it must stay on the current vcpu */
+	if (irq->active)
+		return irq->vcpu ? : irq->target_vcpu;
+
+	/*
+	 * If the IRQ is not active but enabled and pending, we should direct
+	 * it to its configured target VCPU.
+	 * If the distributor is disabled, pending interrupts shouldn't be
+	 * forwarded.
+	 */
+	if (irq->enabled && irq_is_pending(irq)) {
+		if (unlikely(irq->target_vcpu &&
+			     !irq->target_vcpu->kvm->arch.vgic.enabled))
+			return NULL;
+
+		return irq->target_vcpu;
+	}
+
+	/* If neither active nor pending and enabled, then this IRQ should not
+	 * be queued to any VCPU.
+	 */
+	return NULL;
+}
+
+/*
+ * The order of items in the ap_lists defines how we'll pack things in LRs as
+ * well, the first items in the list being the first things populated in the
+ * LRs.
+ *
+ * A hard rule is that active interrupts can never be pushed out of the LRs
+ * (and therefore take priority) since we cannot reliably trap on deactivation
+ * of IRQs and therefore they have to be present in the LRs.
+ *
+ * Otherwise things should be sorted by the priority field and the GIC
+ * hardware support will take care of preemption of priority groups etc.
+ *
+ * Return negative if "a" sorts before "b", 0 to preserve order, and positive
+ * to sort "b" before "a".
+ */
+static int vgic_irq_cmp(void *priv, const struct list_head *a,
+			const struct list_head *b)
+{
+	struct vgic_irq *irqa = container_of(a, struct vgic_irq, ap_list);
+	struct vgic_irq *irqb = container_of(b, struct vgic_irq, ap_list);
+	bool penda, pendb;
+	int ret;
+
+	/*
+	 * list_sort may call this function with the same element when
+	 * the list is fairly long.
+	 */
+	if (unlikely(irqa == irqb))
+		return 0;
+
+	raw_spin_lock(&irqa->irq_lock);
+	raw_spin_lock_nested(&irqb->irq_lock, SINGLE_DEPTH_NESTING);
+
+	if (irqa->active || irqb->active) {
+		ret = (int)irqb->active - (int)irqa->active;
+		goto out;
+	}
+
+	penda = irqa->enabled && irq_is_pending(irqa);
+	pendb = irqb->enabled && irq_is_pending(irqb);
+
+	if (!penda || !pendb) {
+		ret = (int)pendb - (int)penda;
+		goto out;
+	}
+
+	/* Both pending and enabled, sort by priority */
+	ret = irqa->priority - irqb->priority;
+out:
+	raw_spin_unlock(&irqb->irq_lock);
+	raw_spin_unlock(&irqa->irq_lock);
+	return ret;
+}
+
+/* Must be called with the ap_list_lock held */
+static void vgic_sort_ap_list(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+
+	lockdep_assert_held(&vgic_cpu->ap_list_lock);
+
+	list_sort(NULL, &vgic_cpu->ap_list_head, vgic_irq_cmp);
+}
+
+/*
+ * Only valid injection if changing level for level-triggered IRQs or for a
+ * rising edge, and in-kernel connected IRQ lines can only be controlled by
+ * their owner.
+ */
+static bool vgic_validate_injection(struct vgic_irq *irq, bool level, void *owner)
+{
+	if (irq->owner != owner)
+		return false;
+
+	switch (irq->config) {
+	case VGIC_CONFIG_LEVEL:
+		return irq->line_level != level;
+	case VGIC_CONFIG_EDGE:
+		return level;
+	}
+
+	return false;
+}
+
+/*
+ * Check whether an IRQ needs to (and can) be queued to a VCPU's ap list.
+ * Do the queuing if necessary, taking the right locks in the right order.
+ * Returns true when the IRQ was queued, false otherwise.
+ *
+ * Needs to be entered with the IRQ lock already held, but will return
+ * with all locks dropped.
+ */
+bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq,
+			   unsigned long flags)
+{
+	struct kvm_vcpu *vcpu;
+
+	lockdep_assert_held(&irq->irq_lock);
+
+retry:
+	vcpu = vgic_target_oracle(irq);
+	if (irq->vcpu || !vcpu) {
+		/*
+		 * If this IRQ is already on a VCPU's ap_list, then it
+		 * cannot be moved or modified and there is no more work for
+		 * us to do.
+		 *
+		 * Otherwise, if the irq is not pending and enabled, it does
+		 * not need to be inserted into an ap_list and there is also
+		 * no more work for us to do.
+		 */
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+		/*
+		 * We have to kick the VCPU here, because we could be
+		 * queueing an edge-triggered interrupt for which we
+		 * get no EOI maintenance interrupt. In that case,
+		 * while the IRQ is already on the VCPU's AP list, the
+		 * VCPU could have EOI'ed the original interrupt and
+		 * won't see this one until it exits for some other
+		 * reason.
+		 */
+		if (vcpu) {
+			kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+			kvm_vcpu_kick(vcpu);
+		}
+		return false;
+	}
+
+	/*
+	 * We must unlock the irq lock to take the ap_list_lock where
+	 * we are going to insert this new pending interrupt.
+	 */
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+	/* someone can do stuff here, which we re-check below */
+
+	raw_spin_lock_irqsave(&vcpu->arch.vgic_cpu.ap_list_lock, flags);
+	raw_spin_lock(&irq->irq_lock);
+
+	/*
+	 * Did something change behind our backs?
+	 *
+	 * There are two cases:
+	 * 1) The irq lost its pending state or was disabled behind our
+	 *    backs and/or it was queued to another VCPU's ap_list.
+	 * 2) Someone changed the affinity on this irq behind our
+	 *    backs and we are now holding the wrong ap_list_lock.
+	 *
+	 * In both cases, drop the locks and retry.
+	 */
+
+	if (unlikely(irq->vcpu || vcpu != vgic_target_oracle(irq))) {
+		raw_spin_unlock(&irq->irq_lock);
+		raw_spin_unlock_irqrestore(&vcpu->arch.vgic_cpu.ap_list_lock,
+					   flags);
+
+		raw_spin_lock_irqsave(&irq->irq_lock, flags);
+		goto retry;
+	}
+
+	/*
+	 * Grab a reference to the irq to reflect the fact that it is
+	 * now in the ap_list.
+	 */
+	vgic_get_irq_kref(irq);
+	list_add_tail(&irq->ap_list, &vcpu->arch.vgic_cpu.ap_list_head);
+	irq->vcpu = vcpu;
+
+	raw_spin_unlock(&irq->irq_lock);
+	raw_spin_unlock_irqrestore(&vcpu->arch.vgic_cpu.ap_list_lock, flags);
+
+	kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+	kvm_vcpu_kick(vcpu);
+
+	return true;
+}
+
+/**
+ * kvm_vgic_inject_irq - Inject an IRQ from a device to the vgic
+ * @kvm:     The VM structure pointer
+ * @cpuid:   The CPU for PPIs
+ * @intid:   The INTID to inject a new state to.
+ * @level:   Edge-triggered:  true:  to trigger the interrupt
+ *			      false: to ignore the call
+ *	     Level-sensitive  true:  raise the input signal
+ *			      false: lower the input signal
+ * @owner:   The opaque pointer to the owner of the IRQ being raised to verify
+ *           that the caller is allowed to inject this IRQ.  Userspace
+ *           injections will have owner == NULL.
+ *
+ * The VGIC is not concerned with devices being active-LOW or active-HIGH for
+ * level-sensitive interrupts.  You can think of the level parameter as 1
+ * being HIGH and 0 being LOW and all devices being active-HIGH.
+ */
+int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
+			bool level, void *owner)
+{
+	struct kvm_vcpu *vcpu;
+	struct vgic_irq *irq;
+	unsigned long flags;
+	int ret;
+
+	trace_vgic_update_irq_pending(cpuid, intid, level);
+
+	ret = vgic_lazy_init(kvm);
+	if (ret)
+		return ret;
+
+	vcpu = kvm_get_vcpu(kvm, cpuid);
+	if (!vcpu && intid < VGIC_NR_PRIVATE_IRQS)
+		return -EINVAL;
+
+	irq = vgic_get_irq(kvm, vcpu, intid);
+	if (!irq)
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+
+	if (!vgic_validate_injection(irq, level, owner)) {
+		/* Nothing to see here, move along... */
+		raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+		vgic_put_irq(kvm, irq);
+		return 0;
+	}
+
+	if (irq->config == VGIC_CONFIG_LEVEL)
+		irq->line_level = level;
+	else
+		irq->pending_latch = true;
+
+	vgic_queue_irq_unlock(kvm, irq, flags);
+	vgic_put_irq(kvm, irq);
+
+	return 0;
+}
+
+/* @irq->irq_lock must be held */
+static int kvm_vgic_map_irq(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
+			    unsigned int host_irq,
+			    struct irq_ops *ops)
+{
+	struct irq_desc *desc;
+	struct irq_data *data;
+
+	/*
+	 * Find the physical IRQ number corresponding to @host_irq
+	 */
+	desc = irq_to_desc(host_irq);
+	if (!desc) {
+		kvm_err("%s: no interrupt descriptor\n", __func__);
+		return -EINVAL;
+	}
+	data = irq_desc_get_irq_data(desc);
+	while (data->parent_data)
+		data = data->parent_data;
+
+	irq->hw = true;
+	irq->host_irq = host_irq;
+	irq->hwintid = data->hwirq;
+	irq->ops = ops;
+	return 0;
+}
+
+/* @irq->irq_lock must be held */
+static inline void kvm_vgic_unmap_irq(struct vgic_irq *irq)
+{
+	irq->hw = false;
+	irq->hwintid = 0;
+	irq->ops = NULL;
+}
+
+int kvm_vgic_map_phys_irq(struct kvm_vcpu *vcpu, unsigned int host_irq,
+			  u32 vintid, struct irq_ops *ops)
+{
+	struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, vintid);
+	unsigned long flags;
+	int ret;
+
+	BUG_ON(!irq);
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	ret = kvm_vgic_map_irq(vcpu, irq, host_irq, ops);
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	vgic_put_irq(vcpu->kvm, irq);
+
+	return ret;
+}
+
+/**
+ * kvm_vgic_reset_mapped_irq - Reset a mapped IRQ
+ * @vcpu: The VCPU pointer
+ * @vintid: The INTID of the interrupt
+ *
+ * Reset the active and pending states of a mapped interrupt.  Kernel
+ * subsystems injecting mapped interrupts should reset their interrupt lines
+ * when we are doing a reset of the VM.
+ */
+void kvm_vgic_reset_mapped_irq(struct kvm_vcpu *vcpu, u32 vintid)
+{
+	struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, vintid);
+	unsigned long flags;
+
+	if (!irq->hw)
+		goto out;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	irq->active = false;
+	irq->pending_latch = false;
+	irq->line_level = false;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+out:
+	vgic_put_irq(vcpu->kvm, irq);
+}
+
+int kvm_vgic_unmap_phys_irq(struct kvm_vcpu *vcpu, unsigned int vintid)
+{
+	struct vgic_irq *irq;
+	unsigned long flags;
+
+	if (!vgic_initialized(vcpu->kvm))
+		return -EAGAIN;
+
+	irq = vgic_get_irq(vcpu->kvm, vcpu, vintid);
+	BUG_ON(!irq);
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	kvm_vgic_unmap_irq(irq);
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	vgic_put_irq(vcpu->kvm, irq);
+
+	return 0;
+}
+
+int kvm_vgic_get_map(struct kvm_vcpu *vcpu, unsigned int vintid)
+{
+	struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, vintid);
+	unsigned long flags;
+	int ret = -1;
+
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	if (irq->hw)
+		ret = irq->hwintid;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+	vgic_put_irq(vcpu->kvm, irq);
+	return ret;
+}
+
+/**
+ * kvm_vgic_set_owner - Set the owner of an interrupt for a VM
+ *
+ * @vcpu:   Pointer to the VCPU (used for PPIs)
+ * @intid:  The virtual INTID identifying the interrupt (PPI or SPI)
+ * @owner:  Opaque pointer to the owner
+ *
+ * Returns 0 if intid is not already used by another in-kernel device and the
+ * owner is set, otherwise returns an error code.
+ */
+int kvm_vgic_set_owner(struct kvm_vcpu *vcpu, unsigned int intid, void *owner)
+{
+	struct vgic_irq *irq;
+	unsigned long flags;
+	int ret = 0;
+
+	if (!vgic_initialized(vcpu->kvm))
+		return -EAGAIN;
+
+	/* SGIs and LPIs cannot be wired up to any device */
+	if (!irq_is_ppi(intid) && !vgic_valid_spi(vcpu->kvm, intid))
+		return -EINVAL;
+
+	irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	if (irq->owner && irq->owner != owner)
+		ret = -EEXIST;
+	else
+		irq->owner = owner;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+
+	return ret;
+}
+
+/**
+ * vgic_prune_ap_list - Remove non-relevant interrupts from the list
+ *
+ * @vcpu: The VCPU pointer
+ *
+ * Go over the list of "interesting" interrupts, and prune those that we
+ * won't have to consider in the near future.
+ */
+static void vgic_prune_ap_list(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_irq *irq, *tmp;
+
+	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
+
+retry:
+	raw_spin_lock(&vgic_cpu->ap_list_lock);
+
+	list_for_each_entry_safe(irq, tmp, &vgic_cpu->ap_list_head, ap_list) {
+		struct kvm_vcpu *target_vcpu, *vcpuA, *vcpuB;
+		bool target_vcpu_needs_kick = false;
+
+		raw_spin_lock(&irq->irq_lock);
+
+		BUG_ON(vcpu != irq->vcpu);
+
+		target_vcpu = vgic_target_oracle(irq);
+
+		if (!target_vcpu) {
+			/*
+			 * We don't need to process this interrupt any
+			 * further, move it off the list.
+			 */
+			list_del(&irq->ap_list);
+			irq->vcpu = NULL;
+			raw_spin_unlock(&irq->irq_lock);
+
+			/*
+			 * This vgic_put_irq call matches the
+			 * vgic_get_irq_kref in vgic_queue_irq_unlock,
+			 * where we added the LPI to the ap_list. As
+			 * we remove the irq from the list, we drop
+			 * also drop the refcount.
+			 */
+			vgic_put_irq(vcpu->kvm, irq);
+			continue;
+		}
+
+		if (target_vcpu == vcpu) {
+			/* We're on the right CPU */
+			raw_spin_unlock(&irq->irq_lock);
+			continue;
+		}
+
+		/* This interrupt looks like it has to be migrated. */
+
+		raw_spin_unlock(&irq->irq_lock);
+		raw_spin_unlock(&vgic_cpu->ap_list_lock);
+
+		/*
+		 * Ensure locking order by always locking the smallest
+		 * ID first.
+		 */
+		if (vcpu->vcpu_id < target_vcpu->vcpu_id) {
+			vcpuA = vcpu;
+			vcpuB = target_vcpu;
+		} else {
+			vcpuA = target_vcpu;
+			vcpuB = vcpu;
+		}
+
+		raw_spin_lock(&vcpuA->arch.vgic_cpu.ap_list_lock);
+		raw_spin_lock_nested(&vcpuB->arch.vgic_cpu.ap_list_lock,
+				      SINGLE_DEPTH_NESTING);
+		raw_spin_lock(&irq->irq_lock);
+
+		/*
+		 * If the affinity has been preserved, move the
+		 * interrupt around. Otherwise, it means things have
+		 * changed while the interrupt was unlocked, and we
+		 * need to replay this.
+		 *
+		 * In all cases, we cannot trust the list not to have
+		 * changed, so we restart from the beginning.
+		 */
+		if (target_vcpu == vgic_target_oracle(irq)) {
+			struct vgic_cpu *new_cpu = &target_vcpu->arch.vgic_cpu;
+
+			list_del(&irq->ap_list);
+			irq->vcpu = target_vcpu;
+			list_add_tail(&irq->ap_list, &new_cpu->ap_list_head);
+			target_vcpu_needs_kick = true;
+		}
+
+		raw_spin_unlock(&irq->irq_lock);
+		raw_spin_unlock(&vcpuB->arch.vgic_cpu.ap_list_lock);
+		raw_spin_unlock(&vcpuA->arch.vgic_cpu.ap_list_lock);
+
+		if (target_vcpu_needs_kick) {
+			kvm_make_request(KVM_REQ_IRQ_PENDING, target_vcpu);
+			kvm_vcpu_kick(target_vcpu);
+		}
+
+		goto retry;
+	}
+
+	raw_spin_unlock(&vgic_cpu->ap_list_lock);
+}
+
+static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_fold_lr_state(vcpu);
+	else
+		vgic_v3_fold_lr_state(vcpu);
+}
+
+/* Requires the irq_lock to be held. */
+static inline void vgic_populate_lr(struct kvm_vcpu *vcpu,
+				    struct vgic_irq *irq, int lr)
+{
+	lockdep_assert_held(&irq->irq_lock);
+
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_populate_lr(vcpu, irq, lr);
+	else
+		vgic_v3_populate_lr(vcpu, irq, lr);
+}
+
+static inline void vgic_clear_lr(struct kvm_vcpu *vcpu, int lr)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_clear_lr(vcpu, lr);
+	else
+		vgic_v3_clear_lr(vcpu, lr);
+}
+
+static inline void vgic_set_underflow(struct kvm_vcpu *vcpu)
+{
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_set_underflow(vcpu);
+	else
+		vgic_v3_set_underflow(vcpu);
+}
+
+/* Requires the ap_list_lock to be held. */
+static int compute_ap_list_depth(struct kvm_vcpu *vcpu,
+				 bool *multi_sgi)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_irq *irq;
+	int count = 0;
+
+	*multi_sgi = false;
+
+	lockdep_assert_held(&vgic_cpu->ap_list_lock);
+
+	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
+		int w;
+
+		raw_spin_lock(&irq->irq_lock);
+		/* GICv2 SGIs can count for more than one... */
+		w = vgic_irq_get_lr_count(irq);
+		raw_spin_unlock(&irq->irq_lock);
+
+		count += w;
+		*multi_sgi |= (w > 1);
+	}
+	return count;
+}
+
+/* Requires the VCPU's ap_list_lock to be held. */
+static void vgic_flush_lr_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_irq *irq;
+	int count;
+	bool multi_sgi;
+	u8 prio = 0xff;
+	int i = 0;
+
+	lockdep_assert_held(&vgic_cpu->ap_list_lock);
+
+	count = compute_ap_list_depth(vcpu, &multi_sgi);
+	if (count > kvm_vgic_global_state.nr_lr || multi_sgi)
+		vgic_sort_ap_list(vcpu);
+
+	count = 0;
+
+	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
+		raw_spin_lock(&irq->irq_lock);
+
+		/*
+		 * If we have multi-SGIs in the pipeline, we need to
+		 * guarantee that they are all seen before any IRQ of
+		 * lower priority. In that case, we need to filter out
+		 * these interrupts by exiting early. This is easy as
+		 * the AP list has been sorted already.
+		 */
+		if (multi_sgi && irq->priority > prio) {
+			_raw_spin_unlock(&irq->irq_lock);
+			break;
+		}
+
+		if (likely(vgic_target_oracle(irq) == vcpu)) {
+			vgic_populate_lr(vcpu, irq, count++);
+
+			if (irq->source)
+				prio = irq->priority;
+		}
+
+		raw_spin_unlock(&irq->irq_lock);
+
+		if (count == kvm_vgic_global_state.nr_lr) {
+			if (!list_is_last(&irq->ap_list,
+					  &vgic_cpu->ap_list_head))
+				vgic_set_underflow(vcpu);
+			break;
+		}
+	}
+
+	/* Nuke remaining LRs */
+	for (i = count ; i < kvm_vgic_global_state.nr_lr; i++)
+		vgic_clear_lr(vcpu, i);
+
+	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		vcpu->arch.vgic_cpu.vgic_v2.used_lrs = count;
+	else
+		vcpu->arch.vgic_cpu.vgic_v3.used_lrs = count;
+}
+
+static inline bool can_access_vgic_from_kernel(void)
+{
+	/*
+	 * GICv2 can always be accessed from the kernel because it is
+	 * memory-mapped, and VHE systems can access GICv3 EL2 system
+	 * registers.
+	 */
+	return !static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif) || has_vhe();
+}
+
+static inline void vgic_save_state(struct kvm_vcpu *vcpu)
+{
+	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		vgic_v2_save_state(vcpu);
+	else
+		__vgic_v3_save_state(&vcpu->arch.vgic_cpu.vgic_v3);
+}
+
+/* Sync back the hardware VGIC state into our emulation after a guest's run. */
+void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
+{
+	int used_lrs;
+
+	/* An empty ap_list_head implies used_lrs == 0 */
+	if (list_empty(&vcpu->arch.vgic_cpu.ap_list_head))
+		return;
+
+	if (can_access_vgic_from_kernel())
+		vgic_save_state(vcpu);
+
+	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		used_lrs = vcpu->arch.vgic_cpu.vgic_v2.used_lrs;
+	else
+		used_lrs = vcpu->arch.vgic_cpu.vgic_v3.used_lrs;
+
+	if (used_lrs)
+		vgic_fold_lr_state(vcpu);
+	vgic_prune_ap_list(vcpu);
+}
+
+static inline void vgic_restore_state(struct kvm_vcpu *vcpu)
+{
+	if (!static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif))
+		vgic_v2_restore_state(vcpu);
+	else
+		__vgic_v3_restore_state(&vcpu->arch.vgic_cpu.vgic_v3);
+}
+
+/* Flush our emulation state into the GIC hardware before entering the guest. */
+void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * If there are no virtual interrupts active or pending for this
+	 * VCPU, then there is no work to do and we can bail out without
+	 * taking any lock.  There is a potential race with someone injecting
+	 * interrupts to the VCPU, but it is a benign race as the VCPU will
+	 * either observe the new interrupt before or after doing this check,
+	 * and introducing additional synchronization mechanism doesn't change
+	 * this.
+	 *
+	 * Note that we still need to go through the whole thing if anything
+	 * can be directly injected (GICv4).
+	 */
+	if (list_empty(&vcpu->arch.vgic_cpu.ap_list_head) &&
+	    !vgic_supports_direct_msis(vcpu->kvm))
+		return;
+
+	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
+
+	if (!list_empty(&vcpu->arch.vgic_cpu.ap_list_head)) {
+		raw_spin_lock(&vcpu->arch.vgic_cpu.ap_list_lock);
+		vgic_flush_lr_state(vcpu);
+		raw_spin_unlock(&vcpu->arch.vgic_cpu.ap_list_lock);
+	}
+
+	if (can_access_vgic_from_kernel())
+		vgic_restore_state(vcpu);
+
+	if (vgic_supports_direct_msis(vcpu->kvm))
+		vgic_v4_commit(vcpu);
+}
+
+void kvm_vgic_load(struct kvm_vcpu *vcpu)
+{
+	if (unlikely(!vgic_initialized(vcpu->kvm)))
+		return;
+
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_load(vcpu);
+	else
+		vgic_v3_load(vcpu);
+}
+
+void kvm_vgic_put(struct kvm_vcpu *vcpu)
+{
+	if (unlikely(!vgic_initialized(vcpu->kvm)))
+		return;
+
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_put(vcpu);
+	else
+		vgic_v3_put(vcpu);
+}
+
+void kvm_vgic_vmcr_sync(struct kvm_vcpu *vcpu)
+{
+	if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
+		return;
+
+	if (kvm_vgic_global_state.type == VGIC_V2)
+		vgic_v2_vmcr_sync(vcpu);
+	else
+		vgic_v3_vmcr_sync(vcpu);
+}
+
+int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+	struct vgic_irq *irq;
+	bool pending = false;
+	unsigned long flags;
+	struct vgic_vmcr vmcr;
+
+	if (!vcpu->kvm->arch.vgic.enabled)
+		return false;
+
+	if (vcpu->arch.vgic_cpu.vgic_v3.its_vpe.pending_last)
+		return true;
+
+	vgic_get_vmcr(vcpu, &vmcr);
+
+	raw_spin_lock_irqsave(&vgic_cpu->ap_list_lock, flags);
+
+	list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
+		raw_spin_lock(&irq->irq_lock);
+		pending = irq_is_pending(irq) && irq->enabled &&
+			  !irq->active &&
+			  irq->priority < vmcr.pmr;
+		raw_spin_unlock(&irq->irq_lock);
+
+		if (pending)
+			break;
+	}
+
+	raw_spin_unlock_irqrestore(&vgic_cpu->ap_list_lock, flags);
+
+	return pending;
+}
+
+void vgic_kick_vcpus(struct kvm *kvm)
+{
+	struct kvm_vcpu *vcpu;
+	unsigned long c;
+
+	/*
+	 * We've injected an interrupt, time to find out who deserves
+	 * a good kick...
+	 */
+	kvm_for_each_vcpu(c, vcpu, kvm) {
+		if (kvm_vgic_vcpu_pending_irq(vcpu)) {
+			kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+			kvm_vcpu_kick(vcpu);
+		}
+	}
+}
+
+bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int vintid)
+{
+	struct vgic_irq *irq;
+	bool map_is_active;
+	unsigned long flags;
+
+	if (!vgic_initialized(vcpu->kvm))
+		return false;
+
+	irq = vgic_get_irq(vcpu->kvm, vcpu, vintid);
+	raw_spin_lock_irqsave(&irq->irq_lock, flags);
+	map_is_active = irq->hw && irq->active;
+	raw_spin_unlock_irqrestore(&irq->irq_lock, flags);
+	vgic_put_irq(vcpu->kvm, irq);
+
+	return map_is_active;
+}
+
+/*
+ * Level-triggered mapped IRQs are special because we only observe rising
+ * edges as input to the VGIC.
+ *
+ * If the guest never acked the interrupt we have to sample the physical
+ * line and set the line level, because the device state could have changed
+ * or we simply need to process the still pending interrupt later.
+ *
+ * We could also have entered the guest with the interrupt active+pending.
+ * On the next exit, we need to re-evaluate the pending state, as it could
+ * otherwise result in a spurious interrupt by injecting a now potentially
+ * stale pending state.
+ *
+ * If this causes us to lower the level, we have to also clear the physical
+ * active state, since we will otherwise never be told when the interrupt
+ * becomes asserted again.
+ *
+ * Another case is when the interrupt requires a helping hand on
+ * deactivation (no HW deactivation, for example).
+ */
+void vgic_irq_handle_resampling(struct vgic_irq *irq,
+				bool lr_deactivated, bool lr_pending)
+{
+	if (vgic_irq_is_mapped_level(irq)) {
+		bool resample = false;
+
+		if (unlikely(vgic_irq_needs_resampling(irq))) {
+			resample = !(irq->active || irq->pending_latch);
+		} else if (lr_pending || (lr_deactivated && irq->line_level)) {
+			irq->line_level = vgic_get_phys_line_level(irq);
+			resample = !irq->line_level;
+		}
+
+		if (resample)
+			vgic_irq_set_phys_active(irq, false);
+	}
+}
diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h
new file mode 100644
index 000000000..8d134569d
--- /dev/null
+++ b/arch/arm64/kvm/vgic/vgic.h
@@ -0,0 +1,346 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2015, 2016 ARM Ltd.
+ */
+#ifndef __KVM_ARM_VGIC_NEW_H__
+#define __KVM_ARM_VGIC_NEW_H__
+
+#include <linux/irqchip/arm-gic-common.h>
+#include <asm/kvm_mmu.h>
+
+#define PRODUCT_ID_KVM		0x4b	/* ASCII code K */
+#define IMPLEMENTER_ARM		0x43b
+
+#define VGIC_ADDR_UNDEF		(-1)
+#define IS_VGIC_ADDR_UNDEF(_x)  ((_x) == VGIC_ADDR_UNDEF)
+
+#define INTERRUPT_ID_BITS_SPIS	10
+#define INTERRUPT_ID_BITS_ITS	16
+#define VGIC_PRI_BITS		5
+
+#define vgic_irq_is_sgi(intid) ((intid) < VGIC_NR_SGIS)
+
+#define VGIC_AFFINITY_0_SHIFT 0
+#define VGIC_AFFINITY_0_MASK (0xffUL << VGIC_AFFINITY_0_SHIFT)
+#define VGIC_AFFINITY_1_SHIFT 8
+#define VGIC_AFFINITY_1_MASK (0xffUL << VGIC_AFFINITY_1_SHIFT)
+#define VGIC_AFFINITY_2_SHIFT 16
+#define VGIC_AFFINITY_2_MASK (0xffUL << VGIC_AFFINITY_2_SHIFT)
+#define VGIC_AFFINITY_3_SHIFT 24
+#define VGIC_AFFINITY_3_MASK (0xffUL << VGIC_AFFINITY_3_SHIFT)
+
+#define VGIC_AFFINITY_LEVEL(reg, level) \
+	((((reg) & VGIC_AFFINITY_## level ##_MASK) \
+	>> VGIC_AFFINITY_## level ##_SHIFT) << MPIDR_LEVEL_SHIFT(level))
+
+/*
+ * The Userspace encodes the affinity differently from the MPIDR,
+ * Below macro converts vgic userspace format to MPIDR reg format.
+ */
+#define VGIC_TO_MPIDR(val) (VGIC_AFFINITY_LEVEL(val, 0) | \
+			    VGIC_AFFINITY_LEVEL(val, 1) | \
+			    VGIC_AFFINITY_LEVEL(val, 2) | \
+			    VGIC_AFFINITY_LEVEL(val, 3))
+
+/*
+ * As per Documentation/virt/kvm/devices/arm-vgic-v3.rst,
+ * below macros are defined for CPUREG encoding.
+ */
+#define KVM_REG_ARM_VGIC_SYSREG_OP0_MASK   0x000000000000c000
+#define KVM_REG_ARM_VGIC_SYSREG_OP0_SHIFT  14
+#define KVM_REG_ARM_VGIC_SYSREG_OP1_MASK   0x0000000000003800
+#define KVM_REG_ARM_VGIC_SYSREG_OP1_SHIFT  11
+#define KVM_REG_ARM_VGIC_SYSREG_CRN_MASK   0x0000000000000780
+#define KVM_REG_ARM_VGIC_SYSREG_CRN_SHIFT  7
+#define KVM_REG_ARM_VGIC_SYSREG_CRM_MASK   0x0000000000000078
+#define KVM_REG_ARM_VGIC_SYSREG_CRM_SHIFT  3
+#define KVM_REG_ARM_VGIC_SYSREG_OP2_MASK   0x0000000000000007
+#define KVM_REG_ARM_VGIC_SYSREG_OP2_SHIFT  0
+
+#define KVM_DEV_ARM_VGIC_SYSREG_MASK (KVM_REG_ARM_VGIC_SYSREG_OP0_MASK | \
+				      KVM_REG_ARM_VGIC_SYSREG_OP1_MASK | \
+				      KVM_REG_ARM_VGIC_SYSREG_CRN_MASK | \
+				      KVM_REG_ARM_VGIC_SYSREG_CRM_MASK | \
+				      KVM_REG_ARM_VGIC_SYSREG_OP2_MASK)
+
+/*
+ * As per Documentation/virt/kvm/devices/arm-vgic-its.rst,
+ * below macros are defined for ITS table entry encoding.
+ */
+#define KVM_ITS_CTE_VALID_SHIFT		63
+#define KVM_ITS_CTE_VALID_MASK		BIT_ULL(63)
+#define KVM_ITS_CTE_RDBASE_SHIFT	16
+#define KVM_ITS_CTE_ICID_MASK		GENMASK_ULL(15, 0)
+#define KVM_ITS_ITE_NEXT_SHIFT		48
+#define KVM_ITS_ITE_PINTID_SHIFT	16
+#define KVM_ITS_ITE_PINTID_MASK		GENMASK_ULL(47, 16)
+#define KVM_ITS_ITE_ICID_MASK		GENMASK_ULL(15, 0)
+#define KVM_ITS_DTE_VALID_SHIFT		63
+#define KVM_ITS_DTE_VALID_MASK		BIT_ULL(63)
+#define KVM_ITS_DTE_NEXT_SHIFT		49
+#define KVM_ITS_DTE_NEXT_MASK		GENMASK_ULL(62, 49)
+#define KVM_ITS_DTE_ITTADDR_SHIFT	5
+#define KVM_ITS_DTE_ITTADDR_MASK	GENMASK_ULL(48, 5)
+#define KVM_ITS_DTE_SIZE_MASK		GENMASK_ULL(4, 0)
+#define KVM_ITS_L1E_VALID_MASK		BIT_ULL(63)
+/* we only support 64 kB translation table page size */
+#define KVM_ITS_L1E_ADDR_MASK		GENMASK_ULL(51, 16)
+
+#define KVM_VGIC_V3_RDIST_INDEX_MASK	GENMASK_ULL(11, 0)
+#define KVM_VGIC_V3_RDIST_FLAGS_MASK	GENMASK_ULL(15, 12)
+#define KVM_VGIC_V3_RDIST_FLAGS_SHIFT	12
+#define KVM_VGIC_V3_RDIST_BASE_MASK	GENMASK_ULL(51, 16)
+#define KVM_VGIC_V3_RDIST_COUNT_MASK	GENMASK_ULL(63, 52)
+#define KVM_VGIC_V3_RDIST_COUNT_SHIFT	52
+
+#ifdef CONFIG_DEBUG_SPINLOCK
+#define DEBUG_SPINLOCK_BUG_ON(p) BUG_ON(p)
+#else
+#define DEBUG_SPINLOCK_BUG_ON(p)
+#endif
+
+static inline u32 vgic_get_implementation_rev(struct kvm_vcpu *vcpu)
+{
+	return vcpu->kvm->arch.vgic.implementation_rev;
+}
+
+/* Requires the irq_lock to be held by the caller. */
+static inline bool irq_is_pending(struct vgic_irq *irq)
+{
+	if (irq->config == VGIC_CONFIG_EDGE)
+		return irq->pending_latch;
+	else
+		return irq->pending_latch || irq->line_level;
+}
+
+static inline bool vgic_irq_is_mapped_level(struct vgic_irq *irq)
+{
+	return irq->config == VGIC_CONFIG_LEVEL && irq->hw;
+}
+
+static inline int vgic_irq_get_lr_count(struct vgic_irq *irq)
+{
+	/* Account for the active state as an interrupt */
+	if (vgic_irq_is_sgi(irq->intid) && irq->source)
+		return hweight8(irq->source) + irq->active;
+
+	return irq_is_pending(irq) || irq->active;
+}
+
+static inline bool vgic_irq_is_multi_sgi(struct vgic_irq *irq)
+{
+	return vgic_irq_get_lr_count(irq) > 1;
+}
+
+static inline int vgic_write_guest_lock(struct kvm *kvm, gpa_t gpa,
+					const void *data, unsigned long len)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	int ret;
+
+	dist->table_write_in_progress = true;
+	ret = kvm_write_guest_lock(kvm, gpa, data, len);
+	dist->table_write_in_progress = false;
+
+	return ret;
+}
+
+/*
+ * This struct provides an intermediate representation of the fields contained
+ * in the GICH_VMCR and ICH_VMCR registers, such that code exporting the GIC
+ * state to userspace can generate either GICv2 or GICv3 CPU interface
+ * registers regardless of the hardware backed GIC used.
+ */
+struct vgic_vmcr {
+	u32	grpen0;
+	u32	grpen1;
+
+	u32	ackctl;
+	u32	fiqen;
+	u32	cbpr;
+	u32	eoim;
+
+	u32	abpr;
+	u32	bpr;
+	u32	pmr;  /* Priority mask field in the GICC_PMR and
+		       * ICC_PMR_EL1 priority field format */
+};
+
+struct vgic_reg_attr {
+	struct kvm_vcpu *vcpu;
+	gpa_t addr;
+};
+
+int vgic_v3_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
+		       struct vgic_reg_attr *reg_attr);
+int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr,
+		       struct vgic_reg_attr *reg_attr);
+const struct vgic_register_region *
+vgic_get_mmio_region(struct kvm_vcpu *vcpu, struct vgic_io_device *iodev,
+		     gpa_t addr, int len);
+struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
+			      u32 intid);
+void __vgic_put_lpi_locked(struct kvm *kvm, struct vgic_irq *irq);
+void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq);
+bool vgic_get_phys_line_level(struct vgic_irq *irq);
+void vgic_irq_set_phys_pending(struct vgic_irq *irq, bool pending);
+void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active);
+bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq,
+			   unsigned long flags);
+void vgic_kick_vcpus(struct kvm *kvm);
+void vgic_irq_handle_resampling(struct vgic_irq *irq,
+				bool lr_deactivated, bool lr_pending);
+
+int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,
+		       phys_addr_t addr, phys_addr_t alignment,
+		       phys_addr_t size);
+
+void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu);
+void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
+void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr);
+void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
+int vgic_v2_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr);
+int vgic_v2_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			 int offset, u32 *val);
+int vgic_v2_cpuif_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			  int offset, u32 *val);
+void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
+void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
+void vgic_v2_enable(struct kvm_vcpu *vcpu);
+int vgic_v2_probe(const struct gic_kvm_info *info);
+int vgic_v2_map_resources(struct kvm *kvm);
+int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
+			     enum vgic_type);
+
+void vgic_v2_init_lrs(void);
+void vgic_v2_load(struct kvm_vcpu *vcpu);
+void vgic_v2_put(struct kvm_vcpu *vcpu);
+void vgic_v2_vmcr_sync(struct kvm_vcpu *vcpu);
+
+void vgic_v2_save_state(struct kvm_vcpu *vcpu);
+void vgic_v2_restore_state(struct kvm_vcpu *vcpu);
+
+static inline void vgic_get_irq_kref(struct vgic_irq *irq)
+{
+	if (irq->intid < VGIC_MIN_LPI)
+		return;
+
+	kref_get(&irq->refcount);
+}
+
+void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu);
+void vgic_v3_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
+void vgic_v3_clear_lr(struct kvm_vcpu *vcpu, int lr);
+void vgic_v3_set_underflow(struct kvm_vcpu *vcpu);
+void vgic_v3_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
+void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
+void vgic_v3_enable(struct kvm_vcpu *vcpu);
+int vgic_v3_probe(const struct gic_kvm_info *info);
+int vgic_v3_map_resources(struct kvm *kvm);
+int vgic_v3_lpi_sync_pending_status(struct kvm *kvm, struct vgic_irq *irq);
+int vgic_v3_save_pending_tables(struct kvm *kvm);
+int vgic_v3_set_redist_base(struct kvm *kvm, u32 index, u64 addr, u32 count);
+int vgic_register_redist_iodev(struct kvm_vcpu *vcpu);
+void vgic_unregister_redist_iodev(struct kvm_vcpu *vcpu);
+bool vgic_v3_check_base(struct kvm *kvm);
+
+void vgic_v3_load(struct kvm_vcpu *vcpu);
+void vgic_v3_put(struct kvm_vcpu *vcpu);
+void vgic_v3_vmcr_sync(struct kvm_vcpu *vcpu);
+
+bool vgic_has_its(struct kvm *kvm);
+int kvm_vgic_register_its_device(void);
+void vgic_enable_lpis(struct kvm_vcpu *vcpu);
+void vgic_flush_pending_lpis(struct kvm_vcpu *vcpu);
+int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi);
+int vgic_v3_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr);
+int vgic_v3_dist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			 int offset, u32 *val);
+int vgic_v3_redist_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+			 int offset, u32 *val);
+int vgic_v3_cpu_sysregs_uaccess(struct kvm_vcpu *vcpu,
+				struct kvm_device_attr *attr, bool is_write);
+int vgic_v3_has_cpu_sysregs_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr);
+int vgic_v3_line_level_info_uaccess(struct kvm_vcpu *vcpu, bool is_write,
+				    u32 intid, u32 *val);
+int kvm_register_vgic_device(unsigned long type);
+void vgic_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
+void vgic_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
+int vgic_lazy_init(struct kvm *kvm);
+int vgic_init(struct kvm *kvm);
+
+void vgic_debug_init(struct kvm *kvm);
+void vgic_debug_destroy(struct kvm *kvm);
+
+static inline int vgic_v3_max_apr_idx(struct kvm_vcpu *vcpu)
+{
+	struct vgic_cpu *cpu_if = &vcpu->arch.vgic_cpu;
+
+	/*
+	 * num_pri_bits are initialized with HW supported values.
+	 * We can rely safely on num_pri_bits even if VM has not
+	 * restored ICC_CTLR_EL1 before restoring APnR registers.
+	 */
+	switch (cpu_if->num_pri_bits) {
+	case 7: return 3;
+	case 6: return 1;
+	default: return 0;
+	}
+}
+
+static inline bool
+vgic_v3_redist_region_full(struct vgic_redist_region *region)
+{
+	if (!region->count)
+		return false;
+
+	return (region->free_index >= region->count);
+}
+
+struct vgic_redist_region *vgic_v3_rdist_free_slot(struct list_head *rdregs);
+
+static inline size_t
+vgic_v3_rd_region_size(struct kvm *kvm, struct vgic_redist_region *rdreg)
+{
+	if (!rdreg->count)
+		return atomic_read(&kvm->online_vcpus) * KVM_VGIC_V3_REDIST_SIZE;
+	else
+		return rdreg->count * KVM_VGIC_V3_REDIST_SIZE;
+}
+
+struct vgic_redist_region *vgic_v3_rdist_region_from_index(struct kvm *kvm,
+							   u32 index);
+void vgic_v3_free_redist_region(struct vgic_redist_region *rdreg);
+
+bool vgic_v3_rdist_overlap(struct kvm *kvm, gpa_t base, size_t size);
+
+static inline bool vgic_dist_overlap(struct kvm *kvm, gpa_t base, size_t size)
+{
+	struct vgic_dist *d = &kvm->arch.vgic;
+
+	return (base + size > d->vgic_dist_base) &&
+		(base < d->vgic_dist_base + KVM_VGIC_V3_DIST_SIZE);
+}
+
+bool vgic_lpis_enabled(struct kvm_vcpu *vcpu);
+int vgic_copy_lpi_list(struct kvm *kvm, struct kvm_vcpu *vcpu, u32 **intid_ptr);
+int vgic_its_resolve_lpi(struct kvm *kvm, struct vgic_its *its,
+			 u32 devid, u32 eventid, struct vgic_irq **irq);
+struct vgic_its *vgic_msi_to_its(struct kvm *kvm, struct kvm_msi *msi);
+int vgic_its_inject_cached_translation(struct kvm *kvm, struct kvm_msi *msi);
+void vgic_lpi_translation_cache_init(struct kvm *kvm);
+void vgic_lpi_translation_cache_destroy(struct kvm *kvm);
+void vgic_its_invalidate_cache(struct kvm *kvm);
+
+/* GICv4.1 MMIO interface */
+int vgic_its_inv_lpi(struct kvm *kvm, struct vgic_irq *irq);
+int vgic_its_invall(struct kvm_vcpu *vcpu);
+
+bool vgic_supports_direct_msis(struct kvm *kvm);
+int vgic_v4_init(struct kvm *kvm);
+void vgic_v4_teardown(struct kvm *kvm);
+void vgic_v4_configure_vsgis(struct kvm *kvm);
+void vgic_v4_get_vlpi_state(struct vgic_irq *irq, bool *val);
+int vgic_v4_request_vpe_irq(struct kvm_vcpu *vcpu, int irq);
+
+#endif
diff --git a/arch/arm64/kvm/vmid.c b/arch/arm64/kvm/vmid.c
new file mode 100644
index 000000000..7fe8ba1a2
--- /dev/null
+++ b/arch/arm64/kvm/vmid.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * VMID allocator.
+ *
+ * Based on Arm64 ASID allocator algorithm.
+ * Please refer arch/arm64/mm/context.c for detailed
+ * comments on algorithm.
+ *
+ * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+
+unsigned int __ro_after_init kvm_arm_vmid_bits;
+static DEFINE_RAW_SPINLOCK(cpu_vmid_lock);
+
+static atomic64_t vmid_generation;
+static unsigned long *vmid_map;
+
+static DEFINE_PER_CPU(atomic64_t, active_vmids);
+static DEFINE_PER_CPU(u64, reserved_vmids);
+
+#define VMID_MASK		(~GENMASK(kvm_arm_vmid_bits - 1, 0))
+#define VMID_FIRST_VERSION	(1UL << kvm_arm_vmid_bits)
+
+#define NUM_USER_VMIDS		VMID_FIRST_VERSION
+#define vmid2idx(vmid)		((vmid) & ~VMID_MASK)
+#define idx2vmid(idx)		vmid2idx(idx)
+
+/*
+ * As vmid #0 is always reserved, we will never allocate one
+ * as below and can be treated as invalid. This is used to
+ * set the active_vmids on vCPU schedule out.
+ */
+#define VMID_ACTIVE_INVALID		VMID_FIRST_VERSION
+
+#define vmid_gen_match(vmid) \
+	(!(((vmid) ^ atomic64_read(&vmid_generation)) >> kvm_arm_vmid_bits))
+
+static void flush_context(void)
+{
+	int cpu;
+	u64 vmid;
+
+	bitmap_zero(vmid_map, NUM_USER_VMIDS);
+
+	for_each_possible_cpu(cpu) {
+		vmid = atomic64_xchg_relaxed(&per_cpu(active_vmids, cpu), 0);
+
+		/* Preserve reserved VMID */
+		if (vmid == 0)
+			vmid = per_cpu(reserved_vmids, cpu);
+		__set_bit(vmid2idx(vmid), vmid_map);
+		per_cpu(reserved_vmids, cpu) = vmid;
+	}
+
+	/*
+	 * Unlike ASID allocator, we expect less frequent rollover in
+	 * case of VMIDs. Hence, instead of marking the CPU as
+	 * flush_pending and issuing a local context invalidation on
+	 * the next context-switch, we broadcast TLB flush + I-cache
+	 * invalidation over the inner shareable domain on rollover.
+	 */
+	kvm_call_hyp(__kvm_flush_vm_context);
+}
+
+static bool check_update_reserved_vmid(u64 vmid, u64 newvmid)
+{
+	int cpu;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved VMIDs looking for a match
+	 * and update to use newvmid (i.e. the same VMID in the current
+	 * generation).
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_vmids, cpu) == vmid) {
+			hit = true;
+			per_cpu(reserved_vmids, cpu) = newvmid;
+		}
+	}
+
+	return hit;
+}
+
+static u64 new_vmid(struct kvm_vmid *kvm_vmid)
+{
+	static u32 cur_idx = 1;
+	u64 vmid = atomic64_read(&kvm_vmid->id);
+	u64 generation = atomic64_read(&vmid_generation);
+
+	if (vmid != 0) {
+		u64 newvmid = generation | (vmid & ~VMID_MASK);
+
+		if (check_update_reserved_vmid(vmid, newvmid)) {
+			atomic64_set(&kvm_vmid->id, newvmid);
+			return newvmid;
+		}
+
+		if (!__test_and_set_bit(vmid2idx(vmid), vmid_map)) {
+			atomic64_set(&kvm_vmid->id, newvmid);
+			return newvmid;
+		}
+	}
+
+	vmid = find_next_zero_bit(vmid_map, NUM_USER_VMIDS, cur_idx);
+	if (vmid != NUM_USER_VMIDS)
+		goto set_vmid;
+
+	/* We're out of VMIDs, so increment the global generation count */
+	generation = atomic64_add_return_relaxed(VMID_FIRST_VERSION,
+						 &vmid_generation);
+	flush_context();
+
+	/* We have more VMIDs than CPUs, so this will always succeed */
+	vmid = find_next_zero_bit(vmid_map, NUM_USER_VMIDS, 1);
+
+set_vmid:
+	__set_bit(vmid, vmid_map);
+	cur_idx = vmid;
+	vmid = idx2vmid(vmid) | generation;
+	atomic64_set(&kvm_vmid->id, vmid);
+	return vmid;
+}
+
+/* Called from vCPU sched out with preemption disabled */
+void kvm_arm_vmid_clear_active(void)
+{
+	atomic64_set(this_cpu_ptr(&active_vmids), VMID_ACTIVE_INVALID);
+}
+
+void kvm_arm_vmid_update(struct kvm_vmid *kvm_vmid)
+{
+	unsigned long flags;
+	u64 vmid, old_active_vmid;
+
+	vmid = atomic64_read(&kvm_vmid->id);
+
+	/*
+	 * Please refer comments in check_and_switch_context() in
+	 * arch/arm64/mm/context.c.
+	 *
+	 * Unlike ASID allocator, we set the active_vmids to
+	 * VMID_ACTIVE_INVALID on vCPU schedule out to avoid
+	 * reserving the VMID space needlessly on rollover.
+	 * Hence explicitly check here for a "!= 0" to
+	 * handle the sync with a concurrent rollover.
+	 */
+	old_active_vmid = atomic64_read(this_cpu_ptr(&active_vmids));
+	if (old_active_vmid != 0 && vmid_gen_match(vmid) &&
+	    0 != atomic64_cmpxchg_relaxed(this_cpu_ptr(&active_vmids),
+					  old_active_vmid, vmid))
+		return;
+
+	raw_spin_lock_irqsave(&cpu_vmid_lock, flags);
+
+	/* Check that our VMID belongs to the current generation. */
+	vmid = atomic64_read(&kvm_vmid->id);
+	if (!vmid_gen_match(vmid))
+		vmid = new_vmid(kvm_vmid);
+
+	atomic64_set(this_cpu_ptr(&active_vmids), vmid);
+	raw_spin_unlock_irqrestore(&cpu_vmid_lock, flags);
+}
+
+/*
+ * Initialize the VMID allocator
+ */
+int __init kvm_arm_vmid_alloc_init(void)
+{
+	kvm_arm_vmid_bits = kvm_get_vmid_bits();
+
+	/*
+	 * Expect allocation after rollover to fail if we don't have
+	 * at least one more VMID than CPUs. VMID #0 is always reserved.
+	 */
+	WARN_ON(NUM_USER_VMIDS - 1 <= num_possible_cpus());
+	atomic64_set(&vmid_generation, VMID_FIRST_VERSION);
+	vmid_map = bitmap_zalloc(NUM_USER_VMIDS, GFP_KERNEL);
+	if (!vmid_map)
+		return -ENOMEM;
+
+	return 0;
+}
+
+void __init kvm_arm_vmid_alloc_free(void)
+{
+	bitmap_free(vmid_map);
+}
diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile
new file mode 100644
index 000000000..29490be25
--- /dev/null
+++ b/arch/arm64/lib/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+lib-y		:= clear_user.o delay.o copy_from_user.o		\
+		   copy_to_user.o copy_page.o				\
+		   clear_page.o csum.o insn.o memchr.o memcpy.o		\
+		   memset.o memcmp.o strcmp.o strncmp.o strlen.o	\
+		   strnlen.o strchr.o strrchr.o tishift.o
+
+ifeq ($(CONFIG_KERNEL_MODE_NEON), y)
+obj-$(CONFIG_XOR_BLOCKS)	+= xor-neon.o
+CFLAGS_REMOVE_xor-neon.o	+= -mgeneral-regs-only
+CFLAGS_xor-neon.o		+= -ffreestanding
+# Enable <arm_neon.h>
+CFLAGS_xor-neon.o		+= -isystem $(shell $(CC) -print-file-name=include)
+endif
+
+lib-$(CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE) += uaccess_flushcache.o
+
+obj-$(CONFIG_CRC32) += crc32.o
+
+obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
+
+obj-$(CONFIG_ARM64_MTE) += mte.o
+
+obj-$(CONFIG_KASAN_SW_TAGS) += kasan_sw_tags.o
diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S
new file mode 100644
index 000000000..ebde40e7f
--- /dev/null
+++ b/arch/arm64/lib/clear_page.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+/*
+ * Clear page @dest
+ *
+ * Parameters:
+ *	x0 - dest
+ */
+SYM_FUNC_START(__pi_clear_page)
+	mrs	x1, dczid_el0
+	tbnz	x1, #4, 2f	/* Branch if DC ZVA is prohibited */
+	and	w1, w1, #0xf
+	mov	x2, #4
+	lsl	x1, x2, x1
+
+1:	dc	zva, x0
+	add	x0, x0, x1
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	1b
+	ret
+
+2:	stnp	xzr, xzr, [x0]
+	stnp	xzr, xzr, [x0, #16]
+	stnp	xzr, xzr, [x0, #32]
+	stnp	xzr, xzr, [x0, #48]
+	add	x0, x0, #64
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	2b
+	ret
+SYM_FUNC_END(__pi_clear_page)
+SYM_FUNC_ALIAS(clear_page, __pi_clear_page)
+EXPORT_SYMBOL(clear_page)
diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S
new file mode 100644
index 000000000..a5a5f5b97
--- /dev/null
+++ b/arch/arm64/lib/clear_user.S
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-uaccess.h>
+
+	.text
+
+/* Prototype: int __arch_clear_user(void *addr, size_t sz)
+ * Purpose  : clear some user memory
+ * Params   : addr - user memory address to clear
+ *          : sz   - number of bytes to clear
+ * Returns  : number of bytes NOT cleared
+ *
+ * Alignment fixed up by hardware.
+ */
+
+	.p2align 4
+	// Alignment is for the loop, but since the prologue (including BTI)
+	// is also 16 bytes we can keep any padding outside the function
+SYM_FUNC_START(__arch_clear_user)
+	add	x2, x0, x1
+	subs	x1, x1, #8
+	b.mi	2f
+1:
+USER(9f, sttr	xzr, [x0])
+	add	x0, x0, #8
+	subs	x1, x1, #8
+	b.hi	1b
+USER(9f, sttr	xzr, [x2, #-8])
+	mov	x0, #0
+	ret
+
+2:	tbz	x1, #2, 3f
+USER(9f, sttr	wzr, [x0])
+USER(8f, sttr	wzr, [x2, #-4])
+	mov	x0, #0
+	ret
+
+3:	tbz	x1, #1, 4f
+USER(9f, sttrh	wzr, [x0])
+4:	tbz	x1, #0, 5f
+USER(7f, sttrb	wzr, [x2, #-1])
+5:	mov	x0, #0
+	ret
+
+	// Exception fixups
+7:	sub	x0, x2, #5	// Adjust for faulting on the final byte...
+8:	add	x0, x0, #4	// ...or the second word of the 4-7 byte case
+9:	sub	x0, x2, x0
+	ret
+SYM_FUNC_END(__arch_clear_user)
+EXPORT_SYMBOL(__arch_clear_user)
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
new file mode 100644
index 000000000..34e317907
--- /dev/null
+++ b/arch/arm64/lib/copy_from_user.S
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-uaccess.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+/*
+ * Copy from user space to a kernel buffer (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - to
+ *	x1 - from
+ *	x2 - n
+ * Returns:
+ *	x0 - bytes not copied
+ */
+
+	.macro ldrb1 reg, ptr, val
+	user_ldst 9998f, ldtrb, \reg, \ptr, \val
+	.endm
+
+	.macro strb1 reg, ptr, val
+	strb \reg, [\ptr], \val
+	.endm
+
+	.macro ldrh1 reg, ptr, val
+	user_ldst 9997f, ldtrh, \reg, \ptr, \val
+	.endm
+
+	.macro strh1 reg, ptr, val
+	strh \reg, [\ptr], \val
+	.endm
+
+	.macro ldr1 reg, ptr, val
+	user_ldst 9997f, ldtr, \reg, \ptr, \val
+	.endm
+
+	.macro str1 reg, ptr, val
+	str \reg, [\ptr], \val
+	.endm
+
+	.macro ldp1 reg1, reg2, ptr, val
+	user_ldp 9997f, \reg1, \reg2, \ptr, \val
+	.endm
+
+	.macro stp1 reg1, reg2, ptr, val
+	stp \reg1, \reg2, [\ptr], \val
+	.endm
+
+end	.req	x5
+srcin	.req	x15
+SYM_FUNC_START(__arch_copy_from_user)
+	add	end, x0, x2
+	mov	srcin, x1
+#include "copy_template.S"
+	mov	x0, #0				// Nothing to copy
+	ret
+
+	// Exception fixups
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+USER(9998f, ldtrb tmp1w, [srcin])
+	strb	tmp1w, [dst], #1
+9998:	sub	x0, end, dst			// bytes not copied
+	ret
+SYM_FUNC_END(__arch_copy_from_user)
+EXPORT_SYMBOL(__arch_copy_from_user)
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
new file mode 100644
index 000000000..c336d2ffd
--- /dev/null
+++ b/arch/arm64/lib/copy_page.S
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/linkage.h>
+#include <linux/const.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
+
+/*
+ * Copy a page from src to dest (both are page aligned)
+ *
+ * Parameters:
+ *	x0 - dest
+ *	x1 - src
+ */
+SYM_FUNC_START(__pi_copy_page)
+alternative_if ARM64_HAS_NO_HW_PREFETCH
+	// Prefetch three cache lines ahead.
+	prfm	pldl1strm, [x1, #128]
+	prfm	pldl1strm, [x1, #256]
+	prfm	pldl1strm, [x1, #384]
+alternative_else_nop_endif
+
+	ldp	x2, x3, [x1]
+	ldp	x4, x5, [x1, #16]
+	ldp	x6, x7, [x1, #32]
+	ldp	x8, x9, [x1, #48]
+	ldp	x10, x11, [x1, #64]
+	ldp	x12, x13, [x1, #80]
+	ldp	x14, x15, [x1, #96]
+	ldp	x16, x17, [x1, #112]
+
+	add	x0, x0, #256
+	add	x1, x1, #128
+1:
+	tst	x0, #(PAGE_SIZE - 1)
+
+alternative_if ARM64_HAS_NO_HW_PREFETCH
+	prfm	pldl1strm, [x1, #384]
+alternative_else_nop_endif
+
+	stnp	x2, x3, [x0, #-256]
+	ldp	x2, x3, [x1]
+	stnp	x4, x5, [x0, #16 - 256]
+	ldp	x4, x5, [x1, #16]
+	stnp	x6, x7, [x0, #32 - 256]
+	ldp	x6, x7, [x1, #32]
+	stnp	x8, x9, [x0, #48 - 256]
+	ldp	x8, x9, [x1, #48]
+	stnp	x10, x11, [x0, #64 - 256]
+	ldp	x10, x11, [x1, #64]
+	stnp	x12, x13, [x0, #80 - 256]
+	ldp	x12, x13, [x1, #80]
+	stnp	x14, x15, [x0, #96 - 256]
+	ldp	x14, x15, [x1, #96]
+	stnp	x16, x17, [x0, #112 - 256]
+	ldp	x16, x17, [x1, #112]
+
+	add	x0, x0, #128
+	add	x1, x1, #128
+
+	b.ne	1b
+
+	stnp	x2, x3, [x0, #-256]
+	stnp	x4, x5, [x0, #16 - 256]
+	stnp	x6, x7, [x0, #32 - 256]
+	stnp	x8, x9, [x0, #48 - 256]
+	stnp	x10, x11, [x0, #64 - 256]
+	stnp	x12, x13, [x0, #80 - 256]
+	stnp	x14, x15, [x0, #96 - 256]
+	stnp	x16, x17, [x0, #112 - 256]
+
+	ret
+SYM_FUNC_END(__pi_copy_page)
+SYM_FUNC_ALIAS(copy_page, __pi_copy_page)
+EXPORT_SYMBOL(copy_page)
diff --git a/arch/arm64/lib/copy_template.S b/arch/arm64/lib/copy_template.S
new file mode 100644
index 000000000..488df234c
--- /dev/null
+++ b/arch/arm64/lib/copy_template.S
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ */
+
+
+/*
+ * Copy a buffer from src to dest (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - dest
+ *	x1 - src
+ *	x2 - n
+ * Returns:
+ *	x0 - dest
+ */
+dstin	.req	x0
+src	.req	x1
+count	.req	x2
+tmp1	.req	x3
+tmp1w	.req	w3
+tmp2	.req	x4
+tmp2w	.req	w4
+dst	.req	x6
+
+A_l	.req	x7
+A_h	.req	x8
+B_l	.req	x9
+B_h	.req	x10
+C_l	.req	x11
+C_h	.req	x12
+D_l	.req	x13
+D_h	.req	x14
+
+	mov	dst, dstin
+	cmp	count, #16
+	/*When memory length is less than 16, the accessed are not aligned.*/
+	b.lo	.Ltiny15
+
+	neg	tmp2, src
+	ands	tmp2, tmp2, #15/* Bytes to reach alignment. */
+	b.eq	.LSrcAligned
+	sub	count, count, tmp2
+	/*
+	* Copy the leading memory data from src to dst in an increasing
+	* address order.By this way,the risk of overwriting the source
+	* memory data is eliminated when the distance between src and
+	* dst is less than 16. The memory accesses here are alignment.
+	*/
+	tbz	tmp2, #0, 1f
+	ldrb1	tmp1w, src, #1
+	strb1	tmp1w, dst, #1
+1:
+	tbz	tmp2, #1, 2f
+	ldrh1	tmp1w, src, #2
+	strh1	tmp1w, dst, #2
+2:
+	tbz	tmp2, #2, 3f
+	ldr1	tmp1w, src, #4
+	str1	tmp1w, dst, #4
+3:
+	tbz	tmp2, #3, .LSrcAligned
+	ldr1	tmp1, src, #8
+	str1	tmp1, dst, #8
+
+.LSrcAligned:
+	cmp	count, #64
+	b.ge	.Lcpy_over64
+	/*
+	* Deal with small copies quickly by dropping straight into the
+	* exit block.
+	*/
+.Ltail63:
+	/*
+	* Copy up to 48 bytes of data. At this point we only need the
+	* bottom 6 bits of count to be accurate.
+	*/
+	ands	tmp1, count, #0x30
+	b.eq	.Ltiny15
+	cmp	tmp1w, #0x20
+	b.eq	1f
+	b.lt	2f
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+1:
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+2:
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+.Ltiny15:
+	/*
+	* Prefer to break one ldp/stp into several load/store to access
+	* memory in an increasing address order,rather than to load/store 16
+	* bytes from (src-16) to (dst-16) and to backward the src to aligned
+	* address,which way is used in original cortex memcpy. If keeping
+	* the original memcpy process here, memmove need to satisfy the
+	* precondition that src address is at least 16 bytes bigger than dst
+	* address,otherwise some source data will be overwritten when memove
+	* call memcpy directly. To make memmove simpler and decouple the
+	* memcpy's dependency on memmove, withdrew the original process.
+	*/
+	tbz	count, #3, 1f
+	ldr1	tmp1, src, #8
+	str1	tmp1, dst, #8
+1:
+	tbz	count, #2, 2f
+	ldr1	tmp1w, src, #4
+	str1	tmp1w, dst, #4
+2:
+	tbz	count, #1, 3f
+	ldrh1	tmp1w, src, #2
+	strh1	tmp1w, dst, #2
+3:
+	tbz	count, #0, .Lexitfunc
+	ldrb1	tmp1w, src, #1
+	strb1	tmp1w, dst, #1
+
+	b	.Lexitfunc
+
+.Lcpy_over64:
+	subs	count, count, #128
+	b.ge	.Lcpy_body_large
+	/*
+	* Less than 128 bytes to copy, so handle 64 here and then jump
+	* to the tail.
+	*/
+	ldp1	A_l, A_h, src, #16
+	stp1	A_l, A_h, dst, #16
+	ldp1	B_l, B_h, src, #16
+	ldp1	C_l, C_h, src, #16
+	stp1	B_l, B_h, dst, #16
+	stp1	C_l, C_h, dst, #16
+	ldp1	D_l, D_h, src, #16
+	stp1	D_l, D_h, dst, #16
+
+	tst	count, #0x3f
+	b.ne	.Ltail63
+	b	.Lexitfunc
+
+	/*
+	* Critical loop.  Start at a new cache line boundary.  Assuming
+	* 64 bytes per line this ensures the entire loop is in one line.
+	*/
+	.p2align	L1_CACHE_SHIFT
+.Lcpy_body_large:
+	/* pre-get 64 bytes data. */
+	ldp1	A_l, A_h, src, #16
+	ldp1	B_l, B_h, src, #16
+	ldp1	C_l, C_h, src, #16
+	ldp1	D_l, D_h, src, #16
+1:
+	/*
+	* interlace the load of next 64 bytes data block with store of the last
+	* loaded 64 bytes data.
+	*/
+	stp1	A_l, A_h, dst, #16
+	ldp1	A_l, A_h, src, #16
+	stp1	B_l, B_h, dst, #16
+	ldp1	B_l, B_h, src, #16
+	stp1	C_l, C_h, dst, #16
+	ldp1	C_l, C_h, src, #16
+	stp1	D_l, D_h, dst, #16
+	ldp1	D_l, D_h, src, #16
+	subs	count, count, #64
+	b.ge	1b
+	stp1	A_l, A_h, dst, #16
+	stp1	B_l, B_h, dst, #16
+	stp1	C_l, C_h, dst, #16
+	stp1	D_l, D_h, dst, #16
+
+	tst	count, #0x3f
+	b.ne	.Ltail63
+.Lexitfunc:
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
new file mode 100644
index 000000000..802231772
--- /dev/null
+++ b/arch/arm64/lib/copy_to_user.S
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-uaccess.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+/*
+ * Copy to user space from a kernel buffer (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - to
+ *	x1 - from
+ *	x2 - n
+ * Returns:
+ *	x0 - bytes not copied
+ */
+	.macro ldrb1 reg, ptr, val
+	ldrb  \reg, [\ptr], \val
+	.endm
+
+	.macro strb1 reg, ptr, val
+	user_ldst 9998f, sttrb, \reg, \ptr, \val
+	.endm
+
+	.macro ldrh1 reg, ptr, val
+	ldrh  \reg, [\ptr], \val
+	.endm
+
+	.macro strh1 reg, ptr, val
+	user_ldst 9997f, sttrh, \reg, \ptr, \val
+	.endm
+
+	.macro ldr1 reg, ptr, val
+	ldr \reg, [\ptr], \val
+	.endm
+
+	.macro str1 reg, ptr, val
+	user_ldst 9997f, sttr, \reg, \ptr, \val
+	.endm
+
+	.macro ldp1 reg1, reg2, ptr, val
+	ldp \reg1, \reg2, [\ptr], \val
+	.endm
+
+	.macro stp1 reg1, reg2, ptr, val
+	user_stp 9997f, \reg1, \reg2, \ptr, \val
+	.endm
+
+end	.req	x5
+srcin	.req	x15
+SYM_FUNC_START(__arch_copy_to_user)
+	add	end, x0, x2
+	mov	srcin, x1
+#include "copy_template.S"
+	mov	x0, #0
+	ret
+
+	// Exception fixups
+9997:	cmp	dst, dstin
+	b.ne	9998f
+	// Before being absolutely sure we couldn't copy anything, try harder
+	ldrb	tmp1w, [srcin]
+USER(9998f, sttrb tmp1w, [dst])
+	add	dst, dst, #1
+9998:	sub	x0, end, dst			// bytes not copied
+	ret
+SYM_FUNC_END(__arch_copy_to_user)
+EXPORT_SYMBOL(__arch_copy_to_user)
diff --git a/arch/arm64/lib/crc32.S b/arch/arm64/lib/crc32.S
new file mode 100644
index 000000000..8340dccff
--- /dev/null
+++ b/arch/arm64/lib/crc32.S
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Accelerated CRC32(C) using AArch64 CRC instructions
+ *
+ * Copyright (C) 2016 - 2018 Linaro Ltd <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative.h>
+#include <asm/assembler.h>
+
+	.arch		armv8-a+crc
+
+	.macro		byteorder, reg, be
+	.if		\be
+CPU_LE( rev		\reg, \reg	)
+	.else
+CPU_BE( rev		\reg, \reg	)
+	.endif
+	.endm
+
+	.macro		byteorder16, reg, be
+	.if		\be
+CPU_LE( rev16		\reg, \reg	)
+	.else
+CPU_BE( rev16		\reg, \reg	)
+	.endif
+	.endm
+
+	.macro		bitorder, reg, be
+	.if		\be
+	rbit		\reg, \reg
+	.endif
+	.endm
+
+	.macro		bitorder16, reg, be
+	.if		\be
+	rbit		\reg, \reg
+	lsr		\reg, \reg, #16
+	.endif
+	.endm
+
+	.macro		bitorder8, reg, be
+	.if		\be
+	rbit		\reg, \reg
+	lsr		\reg, \reg, #24
+	.endif
+	.endm
+
+	.macro		__crc32, c, be=0
+	bitorder	w0, \be
+	cmp		x2, #16
+	b.lt		8f			// less than 16 bytes
+
+	and		x7, x2, #0x1f
+	and		x2, x2, #~0x1f
+	cbz		x7, 32f			// multiple of 32 bytes
+
+	and		x8, x7, #0xf
+	ldp		x3, x4, [x1]
+	add		x8, x8, x1
+	add		x1, x1, x7
+	ldp		x5, x6, [x8]
+	byteorder	x3, \be
+	byteorder	x4, \be
+	byteorder	x5, \be
+	byteorder	x6, \be
+	bitorder	x3, \be
+	bitorder	x4, \be
+	bitorder	x5, \be
+	bitorder	x6, \be
+
+	tst		x7, #8
+	crc32\c\()x	w8, w0, x3
+	csel		x3, x3, x4, eq
+	csel		w0, w0, w8, eq
+	tst		x7, #4
+	lsr		x4, x3, #32
+	crc32\c\()w	w8, w0, w3
+	csel		x3, x3, x4, eq
+	csel		w0, w0, w8, eq
+	tst		x7, #2
+	lsr		w4, w3, #16
+	crc32\c\()h	w8, w0, w3
+	csel		w3, w3, w4, eq
+	csel		w0, w0, w8, eq
+	tst		x7, #1
+	crc32\c\()b	w8, w0, w3
+	csel		w0, w0, w8, eq
+	tst		x7, #16
+	crc32\c\()x	w8, w0, x5
+	crc32\c\()x	w8, w8, x6
+	csel		w0, w0, w8, eq
+	cbz		x2, 0f
+
+32:	ldp		x3, x4, [x1], #32
+	sub		x2, x2, #32
+	ldp		x5, x6, [x1, #-16]
+	byteorder	x3, \be
+	byteorder	x4, \be
+	byteorder	x5, \be
+	byteorder	x6, \be
+	bitorder	x3, \be
+	bitorder	x4, \be
+	bitorder	x5, \be
+	bitorder	x6, \be
+	crc32\c\()x	w0, w0, x3
+	crc32\c\()x	w0, w0, x4
+	crc32\c\()x	w0, w0, x5
+	crc32\c\()x	w0, w0, x6
+	cbnz		x2, 32b
+0:	bitorder	w0, \be
+	ret
+
+8:	tbz		x2, #3, 4f
+	ldr		x3, [x1], #8
+	byteorder	x3, \be
+	bitorder	x3, \be
+	crc32\c\()x	w0, w0, x3
+4:	tbz		x2, #2, 2f
+	ldr		w3, [x1], #4
+	byteorder	w3, \be
+	bitorder	w3, \be
+	crc32\c\()w	w0, w0, w3
+2:	tbz		x2, #1, 1f
+	ldrh		w3, [x1], #2
+	byteorder16	w3, \be
+	bitorder16	w3, \be
+	crc32\c\()h	w0, w0, w3
+1:	tbz		x2, #0, 0f
+	ldrb		w3, [x1]
+	bitorder8	w3, \be
+	crc32\c\()b	w0, w0, w3
+0:	bitorder	w0, \be
+	ret
+	.endm
+
+	.align		5
+SYM_FUNC_START(crc32_le)
+alternative_if_not ARM64_HAS_CRC32
+	b		crc32_le_base
+alternative_else_nop_endif
+	__crc32
+SYM_FUNC_END(crc32_le)
+
+	.align		5
+SYM_FUNC_START(__crc32c_le)
+alternative_if_not ARM64_HAS_CRC32
+	b		__crc32c_le_base
+alternative_else_nop_endif
+	__crc32		c
+SYM_FUNC_END(__crc32c_le)
+
+	.align		5
+SYM_FUNC_START(crc32_be)
+alternative_if_not ARM64_HAS_CRC32
+	b		crc32_be_base
+alternative_else_nop_endif
+	__crc32		be=1
+SYM_FUNC_END(crc32_be)
diff --git a/arch/arm64/lib/csum.c b/arch/arm64/lib/csum.c
new file mode 100644
index 000000000..2432683e4
--- /dev/null
+++ b/arch/arm64/lib/csum.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2019-2020 Arm Ltd.
+
+#include <linux/compiler.h>
+#include <linux/kasan-checks.h>
+#include <linux/kernel.h>
+
+#include <net/checksum.h>
+
+/* Looks dumb, but generates nice-ish code */
+static u64 accumulate(u64 sum, u64 data)
+{
+	__uint128_t tmp = (__uint128_t)sum + data;
+	return tmp + (tmp >> 64);
+}
+
+/*
+ * We over-read the buffer and this makes KASAN unhappy. Instead, disable
+ * instrumentation and call kasan explicitly.
+ */
+unsigned int __no_sanitize_address do_csum(const unsigned char *buff, int len)
+{
+	unsigned int offset, shift, sum;
+	const u64 *ptr;
+	u64 data, sum64 = 0;
+
+	if (unlikely(len <= 0))
+		return 0;
+
+	offset = (unsigned long)buff & 7;
+	/*
+	 * This is to all intents and purposes safe, since rounding down cannot
+	 * result in a different page or cache line being accessed, and @buff
+	 * should absolutely not be pointing to anything read-sensitive. We do,
+	 * however, have to be careful not to piss off KASAN, which means using
+	 * unchecked reads to accommodate the head and tail, for which we'll
+	 * compensate with an explicit check up-front.
+	 */
+	kasan_check_read(buff, len);
+	ptr = (u64 *)(buff - offset);
+	len = len + offset - 8;
+
+	/*
+	 * Head: zero out any excess leading bytes. Shifting back by the same
+	 * amount should be at least as fast as any other way of handling the
+	 * odd/even alignment, and means we can ignore it until the very end.
+	 */
+	shift = offset * 8;
+	data = *ptr++;
+#ifdef __LITTLE_ENDIAN
+	data = (data >> shift) << shift;
+#else
+	data = (data << shift) >> shift;
+#endif
+
+	/*
+	 * Body: straightforward aligned loads from here on (the paired loads
+	 * underlying the quadword type still only need dword alignment). The
+	 * main loop strictly excludes the tail, so the second loop will always
+	 * run at least once.
+	 */
+	while (unlikely(len > 64)) {
+		__uint128_t tmp1, tmp2, tmp3, tmp4;
+
+		tmp1 = *(__uint128_t *)ptr;
+		tmp2 = *(__uint128_t *)(ptr + 2);
+		tmp3 = *(__uint128_t *)(ptr + 4);
+		tmp4 = *(__uint128_t *)(ptr + 6);
+
+		len -= 64;
+		ptr += 8;
+
+		/* This is the "don't dump the carry flag into a GPR" idiom */
+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
+		tmp2 += (tmp2 >> 64) | (tmp2 << 64);
+		tmp3 += (tmp3 >> 64) | (tmp3 << 64);
+		tmp4 += (tmp4 >> 64) | (tmp4 << 64);
+		tmp1 = ((tmp1 >> 64) << 64) | (tmp2 >> 64);
+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
+		tmp3 = ((tmp3 >> 64) << 64) | (tmp4 >> 64);
+		tmp3 += (tmp3 >> 64) | (tmp3 << 64);
+		tmp1 = ((tmp1 >> 64) << 64) | (tmp3 >> 64);
+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
+		tmp1 = ((tmp1 >> 64) << 64) | sum64;
+		tmp1 += (tmp1 >> 64) | (tmp1 << 64);
+		sum64 = tmp1 >> 64;
+	}
+	while (len > 8) {
+		__uint128_t tmp;
+
+		sum64 = accumulate(sum64, data);
+		tmp = *(__uint128_t *)ptr;
+
+		len -= 16;
+		ptr += 2;
+
+#ifdef __LITTLE_ENDIAN
+		data = tmp >> 64;
+		sum64 = accumulate(sum64, tmp);
+#else
+		data = tmp;
+		sum64 = accumulate(sum64, tmp >> 64);
+#endif
+	}
+	if (len > 0) {
+		sum64 = accumulate(sum64, data);
+		data = *ptr;
+		len -= 8;
+	}
+	/*
+	 * Tail: zero any over-read bytes similarly to the head, again
+	 * preserving odd/even alignment.
+	 */
+	shift = len * -8;
+#ifdef __LITTLE_ENDIAN
+	data = (data << shift) >> shift;
+#else
+	data = (data >> shift) << shift;
+#endif
+	sum64 = accumulate(sum64, data);
+
+	/* Finally, folding */
+	sum64 += (sum64 >> 32) | (sum64 << 32);
+	sum = sum64 >> 32;
+	sum += (sum >> 16) | (sum << 16);
+	if (offset & 1)
+		return (u16)swab32(sum);
+
+	return sum >> 16;
+}
+
+__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+			const struct in6_addr *daddr,
+			__u32 len, __u8 proto, __wsum csum)
+{
+	__uint128_t src, dst;
+	u64 sum = (__force u64)csum;
+
+	src = *(const __uint128_t *)saddr->s6_addr;
+	dst = *(const __uint128_t *)daddr->s6_addr;
+
+	sum += (__force u32)htonl(len);
+#ifdef __LITTLE_ENDIAN
+	sum += (u32)proto << 24;
+#else
+	sum += proto;
+#endif
+	src += (src >> 64) | (src << 64);
+	dst += (dst >> 64) | (dst << 64);
+
+	sum = accumulate(sum, src >> 64);
+	sum = accumulate(sum, dst >> 64);
+
+	sum += ((sum >> 32) | (sum << 32));
+	return csum_fold((__force __wsum)(sum >> 32));
+}
+EXPORT_SYMBOL(csum_ipv6_magic);
diff --git a/arch/arm64/lib/delay.c b/arch/arm64/lib/delay.c
new file mode 100644
index 000000000..5b7890139
--- /dev/null
+++ b/arch/arm64/lib/delay.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Delay loops based on the OpenRISC implementation.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/timex.h>
+
+#include <clocksource/arm_arch_timer.h>
+
+#define USECS_TO_CYCLES(time_usecs)			\
+	xloops_to_cycles((time_usecs) * 0x10C7UL)
+
+static inline unsigned long xloops_to_cycles(unsigned long xloops)
+{
+	return (xloops * loops_per_jiffy * HZ) >> 32;
+}
+
+void __delay(unsigned long cycles)
+{
+	cycles_t start = get_cycles();
+
+	if (cpus_have_const_cap(ARM64_HAS_WFXT)) {
+		u64 end = start + cycles;
+
+		/*
+		 * Start with WFIT. If an interrupt makes us resume
+		 * early, use a WFET loop to complete the delay.
+		 */
+		wfit(end);
+		while ((get_cycles() - start) < cycles)
+			wfet(end);
+	} else 	if (arch_timer_evtstrm_available()) {
+		const cycles_t timer_evt_period =
+			USECS_TO_CYCLES(ARCH_TIMER_EVT_STREAM_PERIOD_US);
+
+		while ((get_cycles() - start + timer_evt_period) < cycles)
+			wfe();
+	}
+
+	while ((get_cycles() - start) < cycles)
+		cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+inline void __const_udelay(unsigned long xloops)
+{
+	__delay(xloops_to_cycles(xloops));
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+	__const_udelay(usecs * 0x10C7UL); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+	__const_udelay(nsecs * 0x5UL); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);
diff --git a/arch/arm64/lib/error-inject.c b/arch/arm64/lib/error-inject.c
new file mode 100644
index 000000000..ed15021da
--- /dev/null
+++ b/arch/arm64/lib/error-inject.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/error-injection.h>
+#include <linux/kprobes.h>
+
+void override_function_with_return(struct pt_regs *regs)
+{
+	/*
+	 * 'regs' represents the state on entry of a predefined function in
+	 * the kernel/module and which is captured on a kprobe.
+	 *
+	 * When kprobe returns back from exception it will override the end
+	 * of probed function and directly return to the predefined
+	 * function's caller.
+	 */
+	instruction_pointer_set(regs, procedure_link_pointer(regs));
+}
+NOKPROBE_SYMBOL(override_function_with_return);
diff --git a/arch/arm64/lib/insn.c b/arch/arm64/lib/insn.c
new file mode 100644
index 000000000..a635ab83f
--- /dev/null
+++ b/arch/arm64/lib/insn.c
@@ -0,0 +1,1517 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Huawei Ltd.
+ * Author: Jiang Liu <liuj97@gmail.com>
+ *
+ * Copyright (C) 2014-2016 Zi Shen Lim <zlim.lnx@gmail.com>
+ */
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/printk.h>
+#include <linux/sizes.h>
+#include <linux/types.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/errno.h>
+#include <asm/insn.h>
+#include <asm/kprobes.h>
+
+#define AARCH64_INSN_SF_BIT	BIT(31)
+#define AARCH64_INSN_N_BIT	BIT(22)
+#define AARCH64_INSN_LSL_12	BIT(22)
+
+static int __kprobes aarch64_get_imm_shift_mask(enum aarch64_insn_imm_type type,
+						u32 *maskp, int *shiftp)
+{
+	u32 mask;
+	int shift;
+
+	switch (type) {
+	case AARCH64_INSN_IMM_26:
+		mask = BIT(26) - 1;
+		shift = 0;
+		break;
+	case AARCH64_INSN_IMM_19:
+		mask = BIT(19) - 1;
+		shift = 5;
+		break;
+	case AARCH64_INSN_IMM_16:
+		mask = BIT(16) - 1;
+		shift = 5;
+		break;
+	case AARCH64_INSN_IMM_14:
+		mask = BIT(14) - 1;
+		shift = 5;
+		break;
+	case AARCH64_INSN_IMM_12:
+		mask = BIT(12) - 1;
+		shift = 10;
+		break;
+	case AARCH64_INSN_IMM_9:
+		mask = BIT(9) - 1;
+		shift = 12;
+		break;
+	case AARCH64_INSN_IMM_7:
+		mask = BIT(7) - 1;
+		shift = 15;
+		break;
+	case AARCH64_INSN_IMM_6:
+	case AARCH64_INSN_IMM_S:
+		mask = BIT(6) - 1;
+		shift = 10;
+		break;
+	case AARCH64_INSN_IMM_R:
+		mask = BIT(6) - 1;
+		shift = 16;
+		break;
+	case AARCH64_INSN_IMM_N:
+		mask = 1;
+		shift = 22;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*maskp = mask;
+	*shiftp = shift;
+
+	return 0;
+}
+
+#define ADR_IMM_HILOSPLIT	2
+#define ADR_IMM_SIZE		SZ_2M
+#define ADR_IMM_LOMASK		((1 << ADR_IMM_HILOSPLIT) - 1)
+#define ADR_IMM_HIMASK		((ADR_IMM_SIZE >> ADR_IMM_HILOSPLIT) - 1)
+#define ADR_IMM_LOSHIFT		29
+#define ADR_IMM_HISHIFT		5
+
+u64 aarch64_insn_decode_immediate(enum aarch64_insn_imm_type type, u32 insn)
+{
+	u32 immlo, immhi, mask;
+	int shift;
+
+	switch (type) {
+	case AARCH64_INSN_IMM_ADR:
+		shift = 0;
+		immlo = (insn >> ADR_IMM_LOSHIFT) & ADR_IMM_LOMASK;
+		immhi = (insn >> ADR_IMM_HISHIFT) & ADR_IMM_HIMASK;
+		insn = (immhi << ADR_IMM_HILOSPLIT) | immlo;
+		mask = ADR_IMM_SIZE - 1;
+		break;
+	default:
+		if (aarch64_get_imm_shift_mask(type, &mask, &shift) < 0) {
+			pr_err("%s: unknown immediate encoding %d\n", __func__,
+			       type);
+			return 0;
+		}
+	}
+
+	return (insn >> shift) & mask;
+}
+
+u32 __kprobes aarch64_insn_encode_immediate(enum aarch64_insn_imm_type type,
+				  u32 insn, u64 imm)
+{
+	u32 immlo, immhi, mask;
+	int shift;
+
+	if (insn == AARCH64_BREAK_FAULT)
+		return AARCH64_BREAK_FAULT;
+
+	switch (type) {
+	case AARCH64_INSN_IMM_ADR:
+		shift = 0;
+		immlo = (imm & ADR_IMM_LOMASK) << ADR_IMM_LOSHIFT;
+		imm >>= ADR_IMM_HILOSPLIT;
+		immhi = (imm & ADR_IMM_HIMASK) << ADR_IMM_HISHIFT;
+		imm = immlo | immhi;
+		mask = ((ADR_IMM_LOMASK << ADR_IMM_LOSHIFT) |
+			(ADR_IMM_HIMASK << ADR_IMM_HISHIFT));
+		break;
+	default:
+		if (aarch64_get_imm_shift_mask(type, &mask, &shift) < 0) {
+			pr_err("%s: unknown immediate encoding %d\n", __func__,
+			       type);
+			return AARCH64_BREAK_FAULT;
+		}
+	}
+
+	/* Update the immediate field. */
+	insn &= ~(mask << shift);
+	insn |= (imm & mask) << shift;
+
+	return insn;
+}
+
+u32 aarch64_insn_decode_register(enum aarch64_insn_register_type type,
+					u32 insn)
+{
+	int shift;
+
+	switch (type) {
+	case AARCH64_INSN_REGTYPE_RT:
+	case AARCH64_INSN_REGTYPE_RD:
+		shift = 0;
+		break;
+	case AARCH64_INSN_REGTYPE_RN:
+		shift = 5;
+		break;
+	case AARCH64_INSN_REGTYPE_RT2:
+	case AARCH64_INSN_REGTYPE_RA:
+		shift = 10;
+		break;
+	case AARCH64_INSN_REGTYPE_RM:
+		shift = 16;
+		break;
+	default:
+		pr_err("%s: unknown register type encoding %d\n", __func__,
+		       type);
+		return 0;
+	}
+
+	return (insn >> shift) & GENMASK(4, 0);
+}
+
+static u32 aarch64_insn_encode_register(enum aarch64_insn_register_type type,
+					u32 insn,
+					enum aarch64_insn_register reg)
+{
+	int shift;
+
+	if (insn == AARCH64_BREAK_FAULT)
+		return AARCH64_BREAK_FAULT;
+
+	if (reg < AARCH64_INSN_REG_0 || reg > AARCH64_INSN_REG_SP) {
+		pr_err("%s: unknown register encoding %d\n", __func__, reg);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (type) {
+	case AARCH64_INSN_REGTYPE_RT:
+	case AARCH64_INSN_REGTYPE_RD:
+		shift = 0;
+		break;
+	case AARCH64_INSN_REGTYPE_RN:
+		shift = 5;
+		break;
+	case AARCH64_INSN_REGTYPE_RT2:
+	case AARCH64_INSN_REGTYPE_RA:
+		shift = 10;
+		break;
+	case AARCH64_INSN_REGTYPE_RM:
+	case AARCH64_INSN_REGTYPE_RS:
+		shift = 16;
+		break;
+	default:
+		pr_err("%s: unknown register type encoding %d\n", __func__,
+		       type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn &= ~(GENMASK(4, 0) << shift);
+	insn |= reg << shift;
+
+	return insn;
+}
+
+static const u32 aarch64_insn_ldst_size[] = {
+	[AARCH64_INSN_SIZE_8] = 0,
+	[AARCH64_INSN_SIZE_16] = 1,
+	[AARCH64_INSN_SIZE_32] = 2,
+	[AARCH64_INSN_SIZE_64] = 3,
+};
+
+static u32 aarch64_insn_encode_ldst_size(enum aarch64_insn_size_type type,
+					 u32 insn)
+{
+	u32 size;
+
+	if (type < AARCH64_INSN_SIZE_8 || type > AARCH64_INSN_SIZE_64) {
+		pr_err("%s: unknown size encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	size = aarch64_insn_ldst_size[type];
+	insn &= ~GENMASK(31, 30);
+	insn |= size << 30;
+
+	return insn;
+}
+
+static inline long label_imm_common(unsigned long pc, unsigned long addr,
+				     long range)
+{
+	long offset;
+
+	if ((pc & 0x3) || (addr & 0x3)) {
+		pr_err("%s: A64 instructions must be word aligned\n", __func__);
+		return range;
+	}
+
+	offset = ((long)addr - (long)pc);
+
+	if (offset < -range || offset >= range) {
+		pr_err("%s: offset out of range\n", __func__);
+		return range;
+	}
+
+	return offset;
+}
+
+u32 __kprobes aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr,
+					  enum aarch64_insn_branch_type type)
+{
+	u32 insn;
+	long offset;
+
+	/*
+	 * B/BL support [-128M, 128M) offset
+	 * ARM64 virtual address arrangement guarantees all kernel and module
+	 * texts are within +/-128M.
+	 */
+	offset = label_imm_common(pc, addr, SZ_128M);
+	if (offset >= SZ_128M)
+		return AARCH64_BREAK_FAULT;
+
+	switch (type) {
+	case AARCH64_INSN_BRANCH_LINK:
+		insn = aarch64_insn_get_bl_value();
+		break;
+	case AARCH64_INSN_BRANCH_NOLINK:
+		insn = aarch64_insn_get_b_value();
+		break;
+	default:
+		pr_err("%s: unknown branch encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_26, insn,
+					     offset >> 2);
+}
+
+u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr,
+				     enum aarch64_insn_register reg,
+				     enum aarch64_insn_variant variant,
+				     enum aarch64_insn_branch_type type)
+{
+	u32 insn;
+	long offset;
+
+	offset = label_imm_common(pc, addr, SZ_1M);
+	if (offset >= SZ_1M)
+		return AARCH64_BREAK_FAULT;
+
+	switch (type) {
+	case AARCH64_INSN_BRANCH_COMP_ZERO:
+		insn = aarch64_insn_get_cbz_value();
+		break;
+	case AARCH64_INSN_BRANCH_COMP_NONZERO:
+		insn = aarch64_insn_get_cbnz_value();
+		break;
+	default:
+		pr_err("%s: unknown branch encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, reg);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn,
+					     offset >> 2);
+}
+
+u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr,
+				     enum aarch64_insn_condition cond)
+{
+	u32 insn;
+	long offset;
+
+	offset = label_imm_common(pc, addr, SZ_1M);
+
+	insn = aarch64_insn_get_bcond_value();
+
+	if (cond < AARCH64_INSN_COND_EQ || cond > AARCH64_INSN_COND_AL) {
+		pr_err("%s: unknown condition encoding %d\n", __func__, cond);
+		return AARCH64_BREAK_FAULT;
+	}
+	insn |= cond;
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn,
+					     offset >> 2);
+}
+
+u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg,
+				enum aarch64_insn_branch_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_BRANCH_NOLINK:
+		insn = aarch64_insn_get_br_value();
+		break;
+	case AARCH64_INSN_BRANCH_LINK:
+		insn = aarch64_insn_get_blr_value();
+		break;
+	case AARCH64_INSN_BRANCH_RETURN:
+		insn = aarch64_insn_get_ret_value();
+		break;
+	default:
+		pr_err("%s: unknown branch encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, reg);
+}
+
+u32 aarch64_insn_gen_load_store_reg(enum aarch64_insn_register reg,
+				    enum aarch64_insn_register base,
+				    enum aarch64_insn_register offset,
+				    enum aarch64_insn_size_type size,
+				    enum aarch64_insn_ldst_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_LDST_LOAD_REG_OFFSET:
+		insn = aarch64_insn_get_ldr_reg_value();
+		break;
+	case AARCH64_INSN_LDST_SIGNED_LOAD_REG_OFFSET:
+		insn = aarch64_insn_get_signed_ldr_reg_value();
+		break;
+	case AARCH64_INSN_LDST_STORE_REG_OFFSET:
+		insn = aarch64_insn_get_str_reg_value();
+		break;
+	default:
+		pr_err("%s: unknown load/store encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, reg);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    base);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn,
+					    offset);
+}
+
+u32 aarch64_insn_gen_load_store_imm(enum aarch64_insn_register reg,
+				    enum aarch64_insn_register base,
+				    unsigned int imm,
+				    enum aarch64_insn_size_type size,
+				    enum aarch64_insn_ldst_type type)
+{
+	u32 insn;
+	u32 shift;
+
+	if (size < AARCH64_INSN_SIZE_8 || size > AARCH64_INSN_SIZE_64) {
+		pr_err("%s: unknown size encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	shift = aarch64_insn_ldst_size[size];
+	if (imm & ~(BIT(12 + shift) - BIT(shift))) {
+		pr_err("%s: invalid imm: %d\n", __func__, imm);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	imm >>= shift;
+
+	switch (type) {
+	case AARCH64_INSN_LDST_LOAD_IMM_OFFSET:
+		insn = aarch64_insn_get_ldr_imm_value();
+		break;
+	case AARCH64_INSN_LDST_SIGNED_LOAD_IMM_OFFSET:
+		insn = aarch64_insn_get_signed_load_imm_value();
+		break;
+	case AARCH64_INSN_LDST_STORE_IMM_OFFSET:
+		insn = aarch64_insn_get_str_imm_value();
+		break;
+	default:
+		pr_err("%s: unknown load/store encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, reg);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    base);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_12, insn, imm);
+}
+
+u32 aarch64_insn_gen_load_literal(unsigned long pc, unsigned long addr,
+				  enum aarch64_insn_register reg,
+				  bool is64bit)
+{
+	u32 insn;
+	long offset;
+
+	offset = label_imm_common(pc, addr, SZ_1M);
+	if (offset >= SZ_1M)
+		return AARCH64_BREAK_FAULT;
+
+	insn = aarch64_insn_get_ldr_lit_value();
+
+	if (is64bit)
+		insn |= BIT(30);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn, reg);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn,
+					     offset >> 2);
+}
+
+u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1,
+				     enum aarch64_insn_register reg2,
+				     enum aarch64_insn_register base,
+				     int offset,
+				     enum aarch64_insn_variant variant,
+				     enum aarch64_insn_ldst_type type)
+{
+	u32 insn;
+	int shift;
+
+	switch (type) {
+	case AARCH64_INSN_LDST_LOAD_PAIR_PRE_INDEX:
+		insn = aarch64_insn_get_ldp_pre_value();
+		break;
+	case AARCH64_INSN_LDST_STORE_PAIR_PRE_INDEX:
+		insn = aarch64_insn_get_stp_pre_value();
+		break;
+	case AARCH64_INSN_LDST_LOAD_PAIR_POST_INDEX:
+		insn = aarch64_insn_get_ldp_post_value();
+		break;
+	case AARCH64_INSN_LDST_STORE_PAIR_POST_INDEX:
+		insn = aarch64_insn_get_stp_post_value();
+		break;
+	default:
+		pr_err("%s: unknown load/store encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		if ((offset & 0x3) || (offset < -256) || (offset > 252)) {
+			pr_err("%s: offset must be multiples of 4 in the range of [-256, 252] %d\n",
+			       __func__, offset);
+			return AARCH64_BREAK_FAULT;
+		}
+		shift = 2;
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		if ((offset & 0x7) || (offset < -512) || (offset > 504)) {
+			pr_err("%s: offset must be multiples of 8 in the range of [-512, 504] %d\n",
+			       __func__, offset);
+			return AARCH64_BREAK_FAULT;
+		}
+		shift = 3;
+		insn |= AARCH64_INSN_SF_BIT;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
+					    reg1);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT2, insn,
+					    reg2);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    base);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_7, insn,
+					     offset >> shift);
+}
+
+u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
+				   enum aarch64_insn_register base,
+				   enum aarch64_insn_register state,
+				   enum aarch64_insn_size_type size,
+				   enum aarch64_insn_ldst_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_LDST_LOAD_EX:
+	case AARCH64_INSN_LDST_LOAD_ACQ_EX:
+		insn = aarch64_insn_get_load_ex_value();
+		if (type == AARCH64_INSN_LDST_LOAD_ACQ_EX)
+			insn |= BIT(15);
+		break;
+	case AARCH64_INSN_LDST_STORE_EX:
+	case AARCH64_INSN_LDST_STORE_REL_EX:
+		insn = aarch64_insn_get_store_ex_value();
+		if (type == AARCH64_INSN_LDST_STORE_REL_EX)
+			insn |= BIT(15);
+		break;
+	default:
+		pr_err("%s: unknown load/store exclusive encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
+					    reg);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    base);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT2, insn,
+					    AARCH64_INSN_REG_ZR);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RS, insn,
+					    state);
+}
+
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+static u32 aarch64_insn_encode_ldst_order(enum aarch64_insn_mem_order_type type,
+					  u32 insn)
+{
+	u32 order;
+
+	switch (type) {
+	case AARCH64_INSN_MEM_ORDER_NONE:
+		order = 0;
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQ:
+		order = 2;
+		break;
+	case AARCH64_INSN_MEM_ORDER_REL:
+		order = 1;
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQREL:
+		order = 3;
+		break;
+	default:
+		pr_err("%s: unknown mem order %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn &= ~GENMASK(23, 22);
+	insn |= order << 22;
+
+	return insn;
+}
+
+u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
+				  enum aarch64_insn_register address,
+				  enum aarch64_insn_register value,
+				  enum aarch64_insn_size_type size,
+				  enum aarch64_insn_mem_atomic_op op,
+				  enum aarch64_insn_mem_order_type order)
+{
+	u32 insn;
+
+	switch (op) {
+	case AARCH64_INSN_MEM_ATOMIC_ADD:
+		insn = aarch64_insn_get_ldadd_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_CLR:
+		insn = aarch64_insn_get_ldclr_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_EOR:
+		insn = aarch64_insn_get_ldeor_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_SET:
+		insn = aarch64_insn_get_ldset_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_SWP:
+		insn = aarch64_insn_get_swp_value();
+		break;
+	default:
+		pr_err("%s: unimplemented mem atomic op %d\n", __func__, op);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (size) {
+	case AARCH64_INSN_SIZE_32:
+	case AARCH64_INSN_SIZE_64:
+		break;
+	default:
+		pr_err("%s: unimplemented size encoding %d\n", __func__, size);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_ldst_order(order, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
+					    result);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    address);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RS, insn,
+					    value);
+}
+
+static u32 aarch64_insn_encode_cas_order(enum aarch64_insn_mem_order_type type,
+					 u32 insn)
+{
+	u32 order;
+
+	switch (type) {
+	case AARCH64_INSN_MEM_ORDER_NONE:
+		order = 0;
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQ:
+		order = BIT(22);
+		break;
+	case AARCH64_INSN_MEM_ORDER_REL:
+		order = BIT(15);
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQREL:
+		order = BIT(15) | BIT(22);
+		break;
+	default:
+		pr_err("%s: unknown mem order %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn &= ~(BIT(15) | BIT(22));
+	insn |= order;
+
+	return insn;
+}
+
+u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
+			 enum aarch64_insn_register address,
+			 enum aarch64_insn_register value,
+			 enum aarch64_insn_size_type size,
+			 enum aarch64_insn_mem_order_type order)
+{
+	u32 insn;
+
+	switch (size) {
+	case AARCH64_INSN_SIZE_32:
+	case AARCH64_INSN_SIZE_64:
+		break;
+	default:
+		pr_err("%s: unimplemented size encoding %d\n", __func__, size);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_get_cas_value();
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_cas_order(order, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
+					    result);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    address);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RS, insn,
+					    value);
+}
+#endif
+
+u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst,
+				 enum aarch64_insn_register src,
+				 int imm, enum aarch64_insn_variant variant,
+				 enum aarch64_insn_adsb_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_ADSB_ADD:
+		insn = aarch64_insn_get_add_imm_value();
+		break;
+	case AARCH64_INSN_ADSB_SUB:
+		insn = aarch64_insn_get_sub_imm_value();
+		break;
+	case AARCH64_INSN_ADSB_ADD_SETFLAGS:
+		insn = aarch64_insn_get_adds_imm_value();
+		break;
+	case AARCH64_INSN_ADSB_SUB_SETFLAGS:
+		insn = aarch64_insn_get_subs_imm_value();
+		break;
+	default:
+		pr_err("%s: unknown add/sub encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	/* We can't encode more than a 24bit value (12bit + 12bit shift) */
+	if (imm & ~(BIT(24) - 1))
+		goto out;
+
+	/* If we have something in the top 12 bits... */
+	if (imm & ~(SZ_4K - 1)) {
+		/* ... and in the low 12 bits -> error */
+		if (imm & (SZ_4K - 1))
+			goto out;
+
+		imm >>= 12;
+		insn |= AARCH64_INSN_LSL_12;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_12, insn, imm);
+
+out:
+	pr_err("%s: invalid immediate encoding %d\n", __func__, imm);
+	return AARCH64_BREAK_FAULT;
+}
+
+u32 aarch64_insn_gen_bitfield(enum aarch64_insn_register dst,
+			      enum aarch64_insn_register src,
+			      int immr, int imms,
+			      enum aarch64_insn_variant variant,
+			      enum aarch64_insn_bitfield_type type)
+{
+	u32 insn;
+	u32 mask;
+
+	switch (type) {
+	case AARCH64_INSN_BITFIELD_MOVE:
+		insn = aarch64_insn_get_bfm_value();
+		break;
+	case AARCH64_INSN_BITFIELD_MOVE_UNSIGNED:
+		insn = aarch64_insn_get_ubfm_value();
+		break;
+	case AARCH64_INSN_BITFIELD_MOVE_SIGNED:
+		insn = aarch64_insn_get_sbfm_value();
+		break;
+	default:
+		pr_err("%s: unknown bitfield encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		mask = GENMASK(4, 0);
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT | AARCH64_INSN_N_BIT;
+		mask = GENMASK(5, 0);
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	if (immr & ~mask) {
+		pr_err("%s: invalid immr encoding %d\n", __func__, immr);
+		return AARCH64_BREAK_FAULT;
+	}
+	if (imms & ~mask) {
+		pr_err("%s: invalid imms encoding %d\n", __func__, imms);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src);
+
+	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_R, insn, immr);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_S, insn, imms);
+}
+
+u32 aarch64_insn_gen_movewide(enum aarch64_insn_register dst,
+			      int imm, int shift,
+			      enum aarch64_insn_variant variant,
+			      enum aarch64_insn_movewide_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_MOVEWIDE_ZERO:
+		insn = aarch64_insn_get_movz_value();
+		break;
+	case AARCH64_INSN_MOVEWIDE_KEEP:
+		insn = aarch64_insn_get_movk_value();
+		break;
+	case AARCH64_INSN_MOVEWIDE_INVERSE:
+		insn = aarch64_insn_get_movn_value();
+		break;
+	default:
+		pr_err("%s: unknown movewide encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	if (imm & ~(SZ_64K - 1)) {
+		pr_err("%s: invalid immediate encoding %d\n", __func__, imm);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		if (shift != 0 && shift != 16) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		if (shift != 0 && shift != 16 && shift != 32 && shift != 48) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn |= (shift >> 4) << 21;
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_16, insn, imm);
+}
+
+u32 aarch64_insn_gen_add_sub_shifted_reg(enum aarch64_insn_register dst,
+					 enum aarch64_insn_register src,
+					 enum aarch64_insn_register reg,
+					 int shift,
+					 enum aarch64_insn_variant variant,
+					 enum aarch64_insn_adsb_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_ADSB_ADD:
+		insn = aarch64_insn_get_add_value();
+		break;
+	case AARCH64_INSN_ADSB_SUB:
+		insn = aarch64_insn_get_sub_value();
+		break;
+	case AARCH64_INSN_ADSB_ADD_SETFLAGS:
+		insn = aarch64_insn_get_adds_value();
+		break;
+	case AARCH64_INSN_ADSB_SUB_SETFLAGS:
+		insn = aarch64_insn_get_subs_value();
+		break;
+	default:
+		pr_err("%s: unknown add/sub encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		if (shift & ~(SZ_32 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		if (shift & ~(SZ_64 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, reg);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_6, insn, shift);
+}
+
+u32 aarch64_insn_gen_data1(enum aarch64_insn_register dst,
+			   enum aarch64_insn_register src,
+			   enum aarch64_insn_variant variant,
+			   enum aarch64_insn_data1_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_DATA1_REVERSE_16:
+		insn = aarch64_insn_get_rev16_value();
+		break;
+	case AARCH64_INSN_DATA1_REVERSE_32:
+		insn = aarch64_insn_get_rev32_value();
+		break;
+	case AARCH64_INSN_DATA1_REVERSE_64:
+		if (variant != AARCH64_INSN_VARIANT_64BIT) {
+			pr_err("%s: invalid variant for reverse64 %d\n",
+			       __func__, variant);
+			return AARCH64_BREAK_FAULT;
+		}
+		insn = aarch64_insn_get_rev64_value();
+		break;
+	default:
+		pr_err("%s: unknown data1 encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src);
+}
+
+u32 aarch64_insn_gen_data2(enum aarch64_insn_register dst,
+			   enum aarch64_insn_register src,
+			   enum aarch64_insn_register reg,
+			   enum aarch64_insn_variant variant,
+			   enum aarch64_insn_data2_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_DATA2_UDIV:
+		insn = aarch64_insn_get_udiv_value();
+		break;
+	case AARCH64_INSN_DATA2_SDIV:
+		insn = aarch64_insn_get_sdiv_value();
+		break;
+	case AARCH64_INSN_DATA2_LSLV:
+		insn = aarch64_insn_get_lslv_value();
+		break;
+	case AARCH64_INSN_DATA2_LSRV:
+		insn = aarch64_insn_get_lsrv_value();
+		break;
+	case AARCH64_INSN_DATA2_ASRV:
+		insn = aarch64_insn_get_asrv_value();
+		break;
+	case AARCH64_INSN_DATA2_RORV:
+		insn = aarch64_insn_get_rorv_value();
+		break;
+	default:
+		pr_err("%s: unknown data2 encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, reg);
+}
+
+u32 aarch64_insn_gen_data3(enum aarch64_insn_register dst,
+			   enum aarch64_insn_register src,
+			   enum aarch64_insn_register reg1,
+			   enum aarch64_insn_register reg2,
+			   enum aarch64_insn_variant variant,
+			   enum aarch64_insn_data3_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_DATA3_MADD:
+		insn = aarch64_insn_get_madd_value();
+		break;
+	case AARCH64_INSN_DATA3_MSUB:
+		insn = aarch64_insn_get_msub_value();
+		break;
+	default:
+		pr_err("%s: unknown data3 encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RA, insn, src);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    reg1);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn,
+					    reg2);
+}
+
+u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst,
+					 enum aarch64_insn_register src,
+					 enum aarch64_insn_register reg,
+					 int shift,
+					 enum aarch64_insn_variant variant,
+					 enum aarch64_insn_logic_type type)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_LOGIC_AND:
+		insn = aarch64_insn_get_and_value();
+		break;
+	case AARCH64_INSN_LOGIC_BIC:
+		insn = aarch64_insn_get_bic_value();
+		break;
+	case AARCH64_INSN_LOGIC_ORR:
+		insn = aarch64_insn_get_orr_value();
+		break;
+	case AARCH64_INSN_LOGIC_ORN:
+		insn = aarch64_insn_get_orn_value();
+		break;
+	case AARCH64_INSN_LOGIC_EOR:
+		insn = aarch64_insn_get_eor_value();
+		break;
+	case AARCH64_INSN_LOGIC_EON:
+		insn = aarch64_insn_get_eon_value();
+		break;
+	case AARCH64_INSN_LOGIC_AND_SETFLAGS:
+		insn = aarch64_insn_get_ands_value();
+		break;
+	case AARCH64_INSN_LOGIC_BIC_SETFLAGS:
+		insn = aarch64_insn_get_bics_value();
+		break;
+	default:
+		pr_err("%s: unknown logical encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		if (shift & ~(SZ_32 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		if (shift & ~(SZ_64 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, src);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, reg);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_6, insn, shift);
+}
+
+/*
+ * MOV (register) is architecturally an alias of ORR (shifted register) where
+ * MOV <*d>, <*m> is equivalent to ORR <*d>, <*ZR>, <*m>
+ */
+u32 aarch64_insn_gen_move_reg(enum aarch64_insn_register dst,
+			      enum aarch64_insn_register src,
+			      enum aarch64_insn_variant variant)
+{
+	return aarch64_insn_gen_logical_shifted_reg(dst, AARCH64_INSN_REG_ZR,
+						    src, 0, variant,
+						    AARCH64_INSN_LOGIC_ORR);
+}
+
+u32 aarch64_insn_gen_adr(unsigned long pc, unsigned long addr,
+			 enum aarch64_insn_register reg,
+			 enum aarch64_insn_adr_type type)
+{
+	u32 insn;
+	s32 offset;
+
+	switch (type) {
+	case AARCH64_INSN_ADR_TYPE_ADR:
+		insn = aarch64_insn_get_adr_value();
+		offset = addr - pc;
+		break;
+	case AARCH64_INSN_ADR_TYPE_ADRP:
+		insn = aarch64_insn_get_adrp_value();
+		offset = (addr - ALIGN_DOWN(pc, SZ_4K)) >> 12;
+		break;
+	default:
+		pr_err("%s: unknown adr encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	if (offset < -SZ_1M || offset >= SZ_1M)
+		return AARCH64_BREAK_FAULT;
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, reg);
+
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_ADR, insn, offset);
+}
+
+/*
+ * Decode the imm field of a branch, and return the byte offset as a
+ * signed value (so it can be used when computing a new branch
+ * target).
+ */
+s32 aarch64_get_branch_offset(u32 insn)
+{
+	s32 imm;
+
+	if (aarch64_insn_is_b(insn) || aarch64_insn_is_bl(insn)) {
+		imm = aarch64_insn_decode_immediate(AARCH64_INSN_IMM_26, insn);
+		return (imm << 6) >> 4;
+	}
+
+	if (aarch64_insn_is_cbz(insn) || aarch64_insn_is_cbnz(insn) ||
+	    aarch64_insn_is_bcond(insn)) {
+		imm = aarch64_insn_decode_immediate(AARCH64_INSN_IMM_19, insn);
+		return (imm << 13) >> 11;
+	}
+
+	if (aarch64_insn_is_tbz(insn) || aarch64_insn_is_tbnz(insn)) {
+		imm = aarch64_insn_decode_immediate(AARCH64_INSN_IMM_14, insn);
+		return (imm << 18) >> 16;
+	}
+
+	/* Unhandled instruction */
+	BUG();
+}
+
+/*
+ * Encode the displacement of a branch in the imm field and return the
+ * updated instruction.
+ */
+u32 aarch64_set_branch_offset(u32 insn, s32 offset)
+{
+	if (aarch64_insn_is_b(insn) || aarch64_insn_is_bl(insn))
+		return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_26, insn,
+						     offset >> 2);
+
+	if (aarch64_insn_is_cbz(insn) || aarch64_insn_is_cbnz(insn) ||
+	    aarch64_insn_is_bcond(insn))
+		return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn,
+						     offset >> 2);
+
+	if (aarch64_insn_is_tbz(insn) || aarch64_insn_is_tbnz(insn))
+		return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_14, insn,
+						     offset >> 2);
+
+	/* Unhandled instruction */
+	BUG();
+}
+
+s32 aarch64_insn_adrp_get_offset(u32 insn)
+{
+	BUG_ON(!aarch64_insn_is_adrp(insn));
+	return aarch64_insn_decode_immediate(AARCH64_INSN_IMM_ADR, insn) << 12;
+}
+
+u32 aarch64_insn_adrp_set_offset(u32 insn, s32 offset)
+{
+	BUG_ON(!aarch64_insn_is_adrp(insn));
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_ADR, insn,
+						offset >> 12);
+}
+
+/*
+ * Extract the Op/CR data from a msr/mrs instruction.
+ */
+u32 aarch64_insn_extract_system_reg(u32 insn)
+{
+	return (insn & 0x1FFFE0) >> 5;
+}
+
+bool aarch32_insn_is_wide(u32 insn)
+{
+	return insn >= 0xe800;
+}
+
+/*
+ * Macros/defines for extracting register numbers from instruction.
+ */
+u32 aarch32_insn_extract_reg_num(u32 insn, int offset)
+{
+	return (insn & (0xf << offset)) >> offset;
+}
+
+#define OPC2_MASK	0x7
+#define OPC2_OFFSET	5
+u32 aarch32_insn_mcr_extract_opc2(u32 insn)
+{
+	return (insn & (OPC2_MASK << OPC2_OFFSET)) >> OPC2_OFFSET;
+}
+
+#define CRM_MASK	0xf
+u32 aarch32_insn_mcr_extract_crm(u32 insn)
+{
+	return insn & CRM_MASK;
+}
+
+static bool range_of_ones(u64 val)
+{
+	/* Doesn't handle full ones or full zeroes */
+	u64 sval = val >> __ffs64(val);
+
+	/* One of Sean Eron Anderson's bithack tricks */
+	return ((sval + 1) & (sval)) == 0;
+}
+
+static u32 aarch64_encode_immediate(u64 imm,
+				    enum aarch64_insn_variant variant,
+				    u32 insn)
+{
+	unsigned int immr, imms, n, ones, ror, esz, tmp;
+	u64 mask;
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		esz = 32;
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		insn |= AARCH64_INSN_SF_BIT;
+		esz = 64;
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	mask = GENMASK(esz - 1, 0);
+
+	/* Can't encode full zeroes, full ones, or value wider than the mask */
+	if (!imm || imm == mask || imm & ~mask)
+		return AARCH64_BREAK_FAULT;
+
+	/*
+	 * Inverse of Replicate(). Try to spot a repeating pattern
+	 * with a pow2 stride.
+	 */
+	for (tmp = esz / 2; tmp >= 2; tmp /= 2) {
+		u64 emask = BIT(tmp) - 1;
+
+		if ((imm & emask) != ((imm >> tmp) & emask))
+			break;
+
+		esz = tmp;
+		mask = emask;
+	}
+
+	/* N is only set if we're encoding a 64bit value */
+	n = esz == 64;
+
+	/* Trim imm to the element size */
+	imm &= mask;
+
+	/* That's how many ones we need to encode */
+	ones = hweight64(imm);
+
+	/*
+	 * imms is set to (ones - 1), prefixed with a string of ones
+	 * and a zero if they fit. Cap it to 6 bits.
+	 */
+	imms  = ones - 1;
+	imms |= 0xf << ffs(esz);
+	imms &= BIT(6) - 1;
+
+	/* Compute the rotation */
+	if (range_of_ones(imm)) {
+		/*
+		 * Pattern: 0..01..10..0
+		 *
+		 * Compute how many rotate we need to align it right
+		 */
+		ror = __ffs64(imm);
+	} else {
+		/*
+		 * Pattern: 0..01..10..01..1
+		 *
+		 * Fill the unused top bits with ones, and check if
+		 * the result is a valid immediate (all ones with a
+		 * contiguous ranges of zeroes).
+		 */
+		imm |= ~mask;
+		if (!range_of_ones(~imm))
+			return AARCH64_BREAK_FAULT;
+
+		/*
+		 * Compute the rotation to get a continuous set of
+		 * ones, with the first bit set at position 0
+		 */
+		ror = fls64(~imm);
+	}
+
+	/*
+	 * immr is the number of bits we need to rotate back to the
+	 * original set of ones. Note that this is relative to the
+	 * element size...
+	 */
+	immr = (esz - ror) % esz;
+
+	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_N, insn, n);
+	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_R, insn, immr);
+	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_S, insn, imms);
+}
+
+u32 aarch64_insn_gen_logical_immediate(enum aarch64_insn_logic_type type,
+				       enum aarch64_insn_variant variant,
+				       enum aarch64_insn_register Rn,
+				       enum aarch64_insn_register Rd,
+				       u64 imm)
+{
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_LOGIC_AND:
+		insn = aarch64_insn_get_and_imm_value();
+		break;
+	case AARCH64_INSN_LOGIC_ORR:
+		insn = aarch64_insn_get_orr_imm_value();
+		break;
+	case AARCH64_INSN_LOGIC_EOR:
+		insn = aarch64_insn_get_eor_imm_value();
+		break;
+	case AARCH64_INSN_LOGIC_AND_SETFLAGS:
+		insn = aarch64_insn_get_ands_imm_value();
+		break;
+	default:
+		pr_err("%s: unknown logical encoding %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, Rd);
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, Rn);
+	return aarch64_encode_immediate(imm, variant, insn);
+}
+
+u32 aarch64_insn_gen_extr(enum aarch64_insn_variant variant,
+			  enum aarch64_insn_register Rm,
+			  enum aarch64_insn_register Rn,
+			  enum aarch64_insn_register Rd,
+			  u8 lsb)
+{
+	u32 insn;
+
+	insn = aarch64_insn_get_extr_value();
+
+	switch (variant) {
+	case AARCH64_INSN_VARIANT_32BIT:
+		if (lsb > 31)
+			return AARCH64_BREAK_FAULT;
+		break;
+	case AARCH64_INSN_VARIANT_64BIT:
+		if (lsb > 63)
+			return AARCH64_BREAK_FAULT;
+		insn |= AARCH64_INSN_SF_BIT;
+		insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_N, insn, 1);
+		break;
+	default:
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_S, insn, lsb);
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, Rd);
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, Rn);
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, Rm);
+}
+
+u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type)
+{
+	u32 opt;
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_MB_SY:
+		opt = 0xf;
+		break;
+	case AARCH64_INSN_MB_ST:
+		opt = 0xe;
+		break;
+	case AARCH64_INSN_MB_LD:
+		opt = 0xd;
+		break;
+	case AARCH64_INSN_MB_ISH:
+		opt = 0xb;
+		break;
+	case AARCH64_INSN_MB_ISHST:
+		opt = 0xa;
+		break;
+	case AARCH64_INSN_MB_ISHLD:
+		opt = 0x9;
+		break;
+	case AARCH64_INSN_MB_NSH:
+		opt = 0x7;
+		break;
+	case AARCH64_INSN_MB_NSHST:
+		opt = 0x6;
+		break;
+	case AARCH64_INSN_MB_NSHLD:
+		opt = 0x5;
+		break;
+	default:
+		pr_err("%s: unknown dmb type %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_get_dmb_value();
+	insn &= ~GENMASK(11, 8);
+	insn |= (opt << 8);
+
+	return insn;
+}
diff --git a/arch/arm64/lib/kasan_sw_tags.S b/arch/arm64/lib/kasan_sw_tags.S
new file mode 100644
index 000000000..20784ce75
--- /dev/null
+++ b/arch/arm64/lib/kasan_sw_tags.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Google LLC
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Report a tag mismatch detected by tag-based KASAN.
+ *
+ * A compiler-generated thunk calls this with a non-AAPCS calling
+ * convention. Upon entry to this function, registers are as follows:
+ *
+ * x0:         fault address (see below for restore)
+ * x1:         fault description (see below for restore)
+ * x2 to x15:  callee-saved
+ * x16 to x17: safe to clobber
+ * x18 to x30: callee-saved
+ * sp:         pre-decremented by 256 bytes (see below for restore)
+ *
+ * The caller has decremented the SP by 256 bytes, and created a
+ * structure on the stack as follows:
+ *
+ * sp + 0..15:    x0 and x1 to be restored
+ * sp + 16..231:  free for use
+ * sp + 232..247: x29 and x30 (same as in GPRs)
+ * sp + 248..255: free for use
+ *
+ * Note that this is not a struct pt_regs.
+ *
+ * To call a regular AAPCS function we must save x2 to x15 (which we can
+ * store in the gaps), and create a frame record (for which we can use
+ * x29 and x30 spilled by the caller as those match the GPRs).
+ *
+ * The caller expects x0 and x1 to be restored from the structure, and
+ * for the structure to be removed from the stack (i.e. the SP must be
+ * incremented by 256 prior to return).
+ */
+SYM_CODE_START(__hwasan_tag_mismatch)
+	bti	c
+	add	x29, sp, #232
+	stp	x2, x3, [sp, #8 * 2]
+	stp	x4, x5, [sp, #8 * 4]
+	stp	x6, x7, [sp, #8 * 6]
+	stp	x8, x9, [sp, #8 * 8]
+	stp	x10, x11, [sp, #8 * 10]
+	stp	x12, x13, [sp, #8 * 12]
+	stp	x14, x15, [sp, #8 * 14]
+#ifndef CONFIG_SHADOW_CALL_STACK
+	str	x18, [sp, #8 * 18]
+#endif
+
+	mov	x2, x30
+	bl	kasan_tag_mismatch
+
+	ldp	x0, x1, [sp]
+	ldp	x2, x3, [sp, #8 * 2]
+	ldp	x4, x5, [sp, #8 * 4]
+	ldp	x6, x7, [sp, #8 * 6]
+	ldp	x8, x9, [sp, #8 * 8]
+	ldp	x10, x11, [sp, #8 * 10]
+	ldp	x12, x13, [sp, #8 * 12]
+	ldp	x14, x15, [sp, #8 * 14]
+#ifndef CONFIG_SHADOW_CALL_STACK
+	ldr	x18, [sp, #8 * 18]
+#endif
+	ldp	x29, x30, [sp, #8 * 29]
+
+	/* remove the structure from the stack */
+	add	sp, sp, #256
+	ret
+SYM_CODE_END(__hwasan_tag_mismatch)
+EXPORT_SYMBOL(__hwasan_tag_mismatch)
diff --git a/arch/arm64/lib/memchr.S b/arch/arm64/lib/memchr.S
new file mode 100644
index 000000000..37a9f2a4f
--- /dev/null
+++ b/arch/arm64/lib/memchr.S
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Arm Ltd.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Find a character in an area of memory.
+ *
+ * Parameters:
+ *	x0 - buf
+ *	x1 - c
+ *	x2 - n
+ * Returns:
+ *	x0 - address of first occurrence of 'c' or 0
+ */
+
+#define L(label) .L ## label
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+
+#define srcin		x0
+#define chrin		w1
+#define cntin		x2
+
+#define result		x0
+
+#define wordcnt		x3
+#define rep01		x4
+#define repchr		x5
+#define cur_word	x6
+#define cur_byte	w6
+#define tmp		x7
+#define tmp2		x8
+
+	.p2align 4
+	nop
+SYM_FUNC_START(__pi_memchr)
+	and	chrin, chrin, #0xff
+	lsr	wordcnt, cntin, #3
+	cbz	wordcnt, L(byte_loop)
+	mov	rep01, #REP8_01
+	mul	repchr, x1, rep01
+	and	cntin, cntin, #7
+L(word_loop):
+	ldr	cur_word, [srcin], #8
+	sub	wordcnt, wordcnt, #1
+	eor	cur_word, cur_word, repchr
+	sub	tmp, cur_word, rep01
+	orr	tmp2, cur_word, #REP8_7f
+	bics	tmp, tmp, tmp2
+	b.ne	L(found_word)
+	cbnz	wordcnt, L(word_loop)
+L(byte_loop):
+	cbz	cntin, L(not_found)
+	ldrb	cur_byte, [srcin], #1
+	sub	cntin, cntin, #1
+	cmp	cur_byte, chrin
+	b.ne	L(byte_loop)
+	sub	srcin, srcin, #1
+	ret
+L(found_word):
+CPU_LE(	rev	tmp, tmp)
+	clz	tmp, tmp
+	sub	tmp, tmp, #64
+	add	result, srcin, tmp, asr #3
+	ret
+L(not_found):
+	mov	result, #0
+	ret
+SYM_FUNC_END(__pi_memchr)
+SYM_FUNC_ALIAS_WEAK(memchr, __pi_memchr)
+EXPORT_SYMBOL_NOKASAN(memchr)
diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S
new file mode 100644
index 000000000..a5ccf2c55
--- /dev/null
+++ b/arch/arm64/lib/memcmp.S
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2013-2021, Arm Limited.
+ *
+ * Adapted from the original at:
+ * https://github.com/ARM-software/optimized-routines/blob/e823e3abf5f89ecb/string/aarch64/memcmp.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64, unaligned accesses.
+ */
+
+#define L(label) .L ## label
+
+/* Parameters and result.  */
+#define src1		x0
+#define src2		x1
+#define limit		x2
+#define result		w0
+
+/* Internal variables.  */
+#define data1		x3
+#define data1w		w3
+#define data1h		x4
+#define data2		x5
+#define data2w		w5
+#define data2h		x6
+#define tmp1		x7
+#define tmp2		x8
+
+SYM_FUNC_START(__pi_memcmp)
+	subs	limit, limit, 8
+	b.lo	L(less8)
+
+	ldr	data1, [src1], 8
+	ldr	data2, [src2], 8
+	cmp	data1, data2
+	b.ne	L(return)
+
+	subs	limit, limit, 8
+	b.gt	L(more16)
+
+	ldr	data1, [src1, limit]
+	ldr	data2, [src2, limit]
+	b	L(return)
+
+L(more16):
+	ldr	data1, [src1], 8
+	ldr	data2, [src2], 8
+	cmp	data1, data2
+	bne	L(return)
+
+	/* Jump directly to comparing the last 16 bytes for 32 byte (or less)
+	   strings.  */
+	subs	limit, limit, 16
+	b.ls	L(last_bytes)
+
+	/* We overlap loads between 0-32 bytes at either side of SRC1 when we
+	   try to align, so limit it only to strings larger than 128 bytes.  */
+	cmp	limit, 96
+	b.ls	L(loop16)
+
+	/* Align src1 and adjust src2 with bytes not yet done.  */
+	and	tmp1, src1, 15
+	add	limit, limit, tmp1
+	sub	src1, src1, tmp1
+	sub	src2, src2, tmp1
+
+	/* Loop performing 16 bytes per iteration using aligned src1.
+	   Limit is pre-decremented by 16 and must be larger than zero.
+	   Exit if <= 16 bytes left to do or if the data is not equal.  */
+	.p2align 4
+L(loop16):
+	ldp	data1, data1h, [src1], 16
+	ldp	data2, data2h, [src2], 16
+	subs	limit, limit, 16
+	ccmp	data1, data2, 0, hi
+	ccmp	data1h, data2h, 0, eq
+	b.eq	L(loop16)
+
+	cmp	data1, data2
+	bne	L(return)
+	mov	data1, data1h
+	mov	data2, data2h
+	cmp	data1, data2
+	bne	L(return)
+
+	/* Compare last 1-16 bytes using unaligned access.  */
+L(last_bytes):
+	add	src1, src1, limit
+	add	src2, src2, limit
+	ldp	data1, data1h, [src1]
+	ldp	data2, data2h, [src2]
+	cmp	data1, data2
+	bne	L(return)
+	mov	data1, data1h
+	mov	data2, data2h
+	cmp	data1, data2
+
+	/* Compare data bytes and set return value to 0, -1 or 1.  */
+L(return):
+#ifndef __AARCH64EB__
+	rev	data1, data1
+	rev	data2, data2
+#endif
+	cmp	data1, data2
+L(ret_eq):
+	cset	result, ne
+	cneg	result, result, lo
+	ret
+
+	.p2align 4
+	/* Compare up to 8 bytes.  Limit is [-8..-1].  */
+L(less8):
+	adds	limit, limit, 4
+	b.lo	L(less4)
+	ldr	data1w, [src1], 4
+	ldr	data2w, [src2], 4
+	cmp	data1w, data2w
+	b.ne	L(return)
+	sub	limit, limit, 4
+L(less4):
+	adds	limit, limit, 4
+	beq	L(ret_eq)
+L(byte_loop):
+	ldrb	data1w, [src1], 1
+	ldrb	data2w, [src2], 1
+	subs	limit, limit, 1
+	ccmp	data1w, data2w, 0, ne	/* NZCV = 0b0000.  */
+	b.eq	L(byte_loop)
+	sub	result, data1w, data2w
+	ret
+SYM_FUNC_END(__pi_memcmp)
+SYM_FUNC_ALIAS_WEAK(memcmp, __pi_memcmp)
+EXPORT_SYMBOL_NOKASAN(memcmp)
diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S
new file mode 100644
index 000000000..4ab48d49c
--- /dev/null
+++ b/arch/arm64/lib/memcpy.S
@@ -0,0 +1,253 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2021, Arm Limited.
+ *
+ * Adapted from the original at:
+ * https://github.com/ARM-software/optimized-routines/blob/afd6244a1f8d9229/string/aarch64/memcpy.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64, unaligned accesses.
+ *
+ */
+
+#define L(label) .L ## label
+
+#define dstin	x0
+#define src	x1
+#define count	x2
+#define dst	x3
+#define srcend	x4
+#define dstend	x5
+#define A_l	x6
+#define A_lw	w6
+#define A_h	x7
+#define B_l	x8
+#define B_lw	w8
+#define B_h	x9
+#define C_l	x10
+#define C_lw	w10
+#define C_h	x11
+#define D_l	x12
+#define D_h	x13
+#define E_l	x14
+#define E_h	x15
+#define F_l	x16
+#define F_h	x17
+#define G_l	count
+#define G_h	dst
+#define H_l	src
+#define H_h	srcend
+#define tmp1	x14
+
+/* This implementation handles overlaps and supports both memcpy and memmove
+   from a single entry point.  It uses unaligned accesses and branchless
+   sequences to keep the code small, simple and improve performance.
+
+   Copies are split into 3 main cases: small copies of up to 32 bytes, medium
+   copies of up to 128 bytes, and large copies.  The overhead of the overlap
+   check is negligible since it is only required for large copies.
+
+   Large copies use a software pipelined loop processing 64 bytes per iteration.
+   The destination pointer is 16-byte aligned to minimize unaligned accesses.
+   The loop tail is handled by always copying 64 bytes from the end.
+*/
+
+SYM_FUNC_START(__pi_memcpy)
+	add	srcend, src, count
+	add	dstend, dstin, count
+	cmp	count, 128
+	b.hi	L(copy_long)
+	cmp	count, 32
+	b.hi	L(copy32_128)
+
+	/* Small copies: 0..32 bytes.  */
+	cmp	count, 16
+	b.lo	L(copy16)
+	ldp	A_l, A_h, [src]
+	ldp	D_l, D_h, [srcend, -16]
+	stp	A_l, A_h, [dstin]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	/* Copy 8-15 bytes.  */
+L(copy16):
+	tbz	count, 3, L(copy8)
+	ldr	A_l, [src]
+	ldr	A_h, [srcend, -8]
+	str	A_l, [dstin]
+	str	A_h, [dstend, -8]
+	ret
+
+	.p2align 3
+	/* Copy 4-7 bytes.  */
+L(copy8):
+	tbz	count, 2, L(copy4)
+	ldr	A_lw, [src]
+	ldr	B_lw, [srcend, -4]
+	str	A_lw, [dstin]
+	str	B_lw, [dstend, -4]
+	ret
+
+	/* Copy 0..3 bytes using a branchless sequence.  */
+L(copy4):
+	cbz	count, L(copy0)
+	lsr	tmp1, count, 1
+	ldrb	A_lw, [src]
+	ldrb	C_lw, [srcend, -1]
+	ldrb	B_lw, [src, tmp1]
+	strb	A_lw, [dstin]
+	strb	B_lw, [dstin, tmp1]
+	strb	C_lw, [dstend, -1]
+L(copy0):
+	ret
+
+	.p2align 4
+	/* Medium copies: 33..128 bytes.  */
+L(copy32_128):
+	ldp	A_l, A_h, [src]
+	ldp	B_l, B_h, [src, 16]
+	ldp	C_l, C_h, [srcend, -32]
+	ldp	D_l, D_h, [srcend, -16]
+	cmp	count, 64
+	b.hi	L(copy128)
+	stp	A_l, A_h, [dstin]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstend, -32]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	.p2align 4
+	/* Copy 65..128 bytes.  */
+L(copy128):
+	ldp	E_l, E_h, [src, 32]
+	ldp	F_l, F_h, [src, 48]
+	cmp	count, 96
+	b.ls	L(copy96)
+	ldp	G_l, G_h, [srcend, -64]
+	ldp	H_l, H_h, [srcend, -48]
+	stp	G_l, G_h, [dstend, -64]
+	stp	H_l, H_h, [dstend, -48]
+L(copy96):
+	stp	A_l, A_h, [dstin]
+	stp	B_l, B_h, [dstin, 16]
+	stp	E_l, E_h, [dstin, 32]
+	stp	F_l, F_h, [dstin, 48]
+	stp	C_l, C_h, [dstend, -32]
+	stp	D_l, D_h, [dstend, -16]
+	ret
+
+	.p2align 4
+	/* Copy more than 128 bytes.  */
+L(copy_long):
+	/* Use backwards copy if there is an overlap.  */
+	sub	tmp1, dstin, src
+	cbz	tmp1, L(copy0)
+	cmp	tmp1, count
+	b.lo	L(copy_long_backwards)
+
+	/* Copy 16 bytes and then align dst to 16-byte alignment.  */
+
+	ldp	D_l, D_h, [src]
+	and	tmp1, dstin, 15
+	bic	dst, dstin, 15
+	sub	src, src, tmp1
+	add	count, count, tmp1	/* Count is now 16 too large.  */
+	ldp	A_l, A_h, [src, 16]
+	stp	D_l, D_h, [dstin]
+	ldp	B_l, B_h, [src, 32]
+	ldp	C_l, C_h, [src, 48]
+	ldp	D_l, D_h, [src, 64]!
+	subs	count, count, 128 + 16	/* Test and readjust count.  */
+	b.ls	L(copy64_from_end)
+
+L(loop64):
+	stp	A_l, A_h, [dst, 16]
+	ldp	A_l, A_h, [src, 16]
+	stp	B_l, B_h, [dst, 32]
+	ldp	B_l, B_h, [src, 32]
+	stp	C_l, C_h, [dst, 48]
+	ldp	C_l, C_h, [src, 48]
+	stp	D_l, D_h, [dst, 64]!
+	ldp	D_l, D_h, [src, 64]!
+	subs	count, count, 64
+	b.hi	L(loop64)
+
+	/* Write the last iteration and copy 64 bytes from the end.  */
+L(copy64_from_end):
+	ldp	E_l, E_h, [srcend, -64]
+	stp	A_l, A_h, [dst, 16]
+	ldp	A_l, A_h, [srcend, -48]
+	stp	B_l, B_h, [dst, 32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dst, 48]
+	ldp	C_l, C_h, [srcend, -16]
+	stp	D_l, D_h, [dst, 64]
+	stp	E_l, E_h, [dstend, -64]
+	stp	A_l, A_h, [dstend, -48]
+	stp	B_l, B_h, [dstend, -32]
+	stp	C_l, C_h, [dstend, -16]
+	ret
+
+	.p2align 4
+
+	/* Large backwards copy for overlapping copies.
+	   Copy 16 bytes and then align dst to 16-byte alignment.  */
+L(copy_long_backwards):
+	ldp	D_l, D_h, [srcend, -16]
+	and	tmp1, dstend, 15
+	sub	srcend, srcend, tmp1
+	sub	count, count, tmp1
+	ldp	A_l, A_h, [srcend, -16]
+	stp	D_l, D_h, [dstend, -16]
+	ldp	B_l, B_h, [srcend, -32]
+	ldp	C_l, C_h, [srcend, -48]
+	ldp	D_l, D_h, [srcend, -64]!
+	sub	dstend, dstend, tmp1
+	subs	count, count, 128
+	b.ls	L(copy64_from_start)
+
+L(loop64_backwards):
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [srcend, -16]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [srcend, -48]
+	stp	D_l, D_h, [dstend, -64]!
+	ldp	D_l, D_h, [srcend, -64]!
+	subs	count, count, 64
+	b.hi	L(loop64_backwards)
+
+	/* Write the last iteration and copy 64 bytes from the start.  */
+L(copy64_from_start):
+	ldp	G_l, G_h, [src, 48]
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [src, 32]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [src, 16]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [src]
+	stp	D_l, D_h, [dstend, -64]
+	stp	G_l, G_h, [dstin, 48]
+	stp	A_l, A_h, [dstin, 32]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstin]
+	ret
+SYM_FUNC_END(__pi_memcpy)
+
+SYM_FUNC_ALIAS(__memcpy, __pi_memcpy)
+EXPORT_SYMBOL(__memcpy)
+SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy)
+EXPORT_SYMBOL(memcpy)
+
+SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy)
+
+SYM_FUNC_ALIAS(__memmove, __pi_memmove)
+EXPORT_SYMBOL(__memmove)
+SYM_FUNC_ALIAS_WEAK(memmove, __memmove)
+EXPORT_SYMBOL(memmove)
diff --git a/arch/arm64/lib/memset.S b/arch/arm64/lib/memset.S
new file mode 100644
index 000000000..a5aebe82a
--- /dev/null
+++ b/arch/arm64/lib/memset.S
@@ -0,0 +1,210 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cache.h>
+
+/*
+ * Fill in the buffer with character c (alignment handled by the hardware)
+ *
+ * Parameters:
+ *	x0 - buf
+ *	x1 - c
+ *	x2 - n
+ * Returns:
+ *	x0 - buf
+ */
+
+dstin		.req	x0
+val		.req	w1
+count		.req	x2
+tmp1		.req	x3
+tmp1w		.req	w3
+tmp2		.req	x4
+tmp2w		.req	w4
+zva_len_x	.req	x5
+zva_len		.req	w5
+zva_bits_x	.req	x6
+
+A_l		.req	x7
+A_lw		.req	w7
+dst		.req	x8
+tmp3w		.req	w9
+tmp3		.req	x9
+
+SYM_FUNC_START(__pi_memset)
+	mov	dst, dstin	/* Preserve return value.  */
+	and	A_lw, val, #255
+	orr	A_lw, A_lw, A_lw, lsl #8
+	orr	A_lw, A_lw, A_lw, lsl #16
+	orr	A_l, A_l, A_l, lsl #32
+
+	cmp	count, #15
+	b.hi	.Lover16_proc
+	/*All store maybe are non-aligned..*/
+	tbz	count, #3, 1f
+	str	A_l, [dst], #8
+1:
+	tbz	count, #2, 2f
+	str	A_lw, [dst], #4
+2:
+	tbz	count, #1, 3f
+	strh	A_lw, [dst], #2
+3:
+	tbz	count, #0, 4f
+	strb	A_lw, [dst]
+4:
+	ret
+
+.Lover16_proc:
+	/*Whether  the start address is aligned with 16.*/
+	neg	tmp2, dst
+	ands	tmp2, tmp2, #15
+	b.eq	.Laligned
+/*
+* The count is not less than 16, we can use stp to store the start 16 bytes,
+* then adjust the dst aligned with 16.This process will make the current
+* memory address at alignment boundary.
+*/
+	stp	A_l, A_l, [dst] /*non-aligned store..*/
+	/*make the dst aligned..*/
+	sub	count, count, tmp2
+	add	dst, dst, tmp2
+
+.Laligned:
+	cbz	A_l, .Lzero_mem
+
+.Ltail_maybe_long:
+	cmp	count, #64
+	b.ge	.Lnot_short
+.Ltail63:
+	ands	tmp1, count, #0x30
+	b.eq	3f
+	cmp	tmp1w, #0x20
+	b.eq	1f
+	b.lt	2f
+	stp	A_l, A_l, [dst], #16
+1:
+	stp	A_l, A_l, [dst], #16
+2:
+	stp	A_l, A_l, [dst], #16
+/*
+* The last store length is less than 16,use stp to write last 16 bytes.
+* It will lead some bytes written twice and the access is non-aligned.
+*/
+3:
+	ands	count, count, #15
+	cbz	count, 4f
+	add	dst, dst, count
+	stp	A_l, A_l, [dst, #-16]	/* Repeat some/all of last store. */
+4:
+	ret
+
+	/*
+	* Critical loop. Start at a new cache line boundary. Assuming
+	* 64 bytes per line, this ensures the entire loop is in one line.
+	*/
+	.p2align	L1_CACHE_SHIFT
+.Lnot_short:
+	sub	dst, dst, #16/* Pre-bias.  */
+	sub	count, count, #64
+1:
+	stp	A_l, A_l, [dst, #16]
+	stp	A_l, A_l, [dst, #32]
+	stp	A_l, A_l, [dst, #48]
+	stp	A_l, A_l, [dst, #64]!
+	subs	count, count, #64
+	b.ge	1b
+	tst	count, #0x3f
+	add	dst, dst, #16
+	b.ne	.Ltail63
+.Lexitfunc:
+	ret
+
+	/*
+	* For zeroing memory, check to see if we can use the ZVA feature to
+	* zero entire 'cache' lines.
+	*/
+.Lzero_mem:
+	cmp	count, #63
+	b.le	.Ltail63
+	/*
+	* For zeroing small amounts of memory, it's not worth setting up
+	* the line-clear code.
+	*/
+	cmp	count, #128
+	b.lt	.Lnot_short /*count is at least  128 bytes*/
+
+	mrs	tmp1, dczid_el0
+	tbnz	tmp1, #4, .Lnot_short
+	mov	tmp3w, #4
+	and	zva_len, tmp1w, #15	/* Safety: other bits reserved.  */
+	lsl	zva_len, tmp3w, zva_len
+
+	ands	tmp3w, zva_len, #63
+	/*
+	* ensure the zva_len is not less than 64.
+	* It is not meaningful to use ZVA if the block size is less than 64.
+	*/
+	b.ne	.Lnot_short
+.Lzero_by_line:
+	/*
+	* Compute how far we need to go to become suitably aligned. We're
+	* already at quad-word alignment.
+	*/
+	cmp	count, zva_len_x
+	b.lt	.Lnot_short		/* Not enough to reach alignment.  */
+	sub	zva_bits_x, zva_len_x, #1
+	neg	tmp2, dst
+	ands	tmp2, tmp2, zva_bits_x
+	b.eq	2f			/* Already aligned.  */
+	/* Not aligned, check that there's enough to copy after alignment.*/
+	sub	tmp1, count, tmp2
+	/*
+	* grantee the remain length to be ZVA is bigger than 64,
+	* avoid to make the 2f's process over mem range.*/
+	cmp	tmp1, #64
+	ccmp	tmp1, zva_len_x, #8, ge	/* NZCV=0b1000 */
+	b.lt	.Lnot_short
+	/*
+	* We know that there's at least 64 bytes to zero and that it's safe
+	* to overrun by 64 bytes.
+	*/
+	mov	count, tmp1
+1:
+	stp	A_l, A_l, [dst]
+	stp	A_l, A_l, [dst, #16]
+	stp	A_l, A_l, [dst, #32]
+	subs	tmp2, tmp2, #64
+	stp	A_l, A_l, [dst, #48]
+	add	dst, dst, #64
+	b.ge	1b
+	/* We've overrun a bit, so adjust dst downwards.*/
+	add	dst, dst, tmp2
+2:
+	sub	count, count, zva_len_x
+3:
+	dc	zva, dst
+	add	dst, dst, zva_len_x
+	subs	count, count, zva_len_x
+	b.ge	3b
+	ands	count, count, zva_bits_x
+	b.ne	.Ltail_maybe_long
+	ret
+SYM_FUNC_END(__pi_memset)
+
+SYM_FUNC_ALIAS(__memset, __pi_memset)
+EXPORT_SYMBOL(__memset)
+
+SYM_FUNC_ALIAS_WEAK(memset, __pi_memset)
+EXPORT_SYMBOL(memset)
diff --git a/arch/arm64/lib/mte.S b/arch/arm64/lib/mte.S
new file mode 100644
index 000000000..5018ac03b
--- /dev/null
+++ b/arch/arm64/lib/mte.S
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 ARM Ltd.
+ */
+#include <linux/linkage.h>
+
+#include <asm/asm-uaccess.h>
+#include <asm/assembler.h>
+#include <asm/mte.h>
+#include <asm/page.h>
+#include <asm/sysreg.h>
+
+	.arch	armv8.5-a+memtag
+
+/*
+ * multitag_transfer_size - set \reg to the block size that is accessed by the
+ * LDGM/STGM instructions.
+ */
+	.macro	multitag_transfer_size, reg, tmp
+	mrs_s	\reg, SYS_GMID_EL1
+	ubfx	\reg, \reg, #GMID_EL1_BS_SHIFT, #GMID_EL1_BS_WIDTH
+	mov	\tmp, #4
+	lsl	\reg, \tmp, \reg
+	.endm
+
+/*
+ * Clear the tags in a page
+ *   x0 - address of the page to be cleared
+ */
+SYM_FUNC_START(mte_clear_page_tags)
+	multitag_transfer_size x1, x2
+1:	stgm	xzr, [x0]
+	add	x0, x0, x1
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	1b
+	ret
+SYM_FUNC_END(mte_clear_page_tags)
+
+/*
+ * Zero the page and tags at the same time
+ *
+ * Parameters:
+ *	x0 - address to the beginning of the page
+ */
+SYM_FUNC_START(mte_zero_clear_page_tags)
+	and	x0, x0, #(1 << MTE_TAG_SHIFT) - 1	// clear the tag
+	mrs	x1, dczid_el0
+	tbnz	x1, #4, 2f	// Branch if DC GZVA is prohibited
+	and	w1, w1, #0xf
+	mov	x2, #4
+	lsl	x1, x2, x1
+
+1:	dc	gzva, x0
+	add	x0, x0, x1
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	1b
+	ret
+
+2:	stz2g	x0, [x0], #(MTE_GRANULE_SIZE * 2)
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	2b
+	ret
+SYM_FUNC_END(mte_zero_clear_page_tags)
+
+/*
+ * Copy the tags from the source page to the destination one
+ *   x0 - address of the destination page
+ *   x1 - address of the source page
+ */
+SYM_FUNC_START(mte_copy_page_tags)
+	mov	x2, x0
+	mov	x3, x1
+	multitag_transfer_size x5, x6
+1:	ldgm	x4, [x3]
+	stgm	x4, [x2]
+	add	x2, x2, x5
+	add	x3, x3, x5
+	tst	x2, #(PAGE_SIZE - 1)
+	b.ne	1b
+	ret
+SYM_FUNC_END(mte_copy_page_tags)
+
+/*
+ * Read tags from a user buffer (one tag per byte) and set the corresponding
+ * tags at the given kernel address. Used by PTRACE_POKEMTETAGS.
+ *   x0 - kernel address (to)
+ *   x1 - user buffer (from)
+ *   x2 - number of tags/bytes (n)
+ * Returns:
+ *   x0 - number of tags read/set
+ */
+SYM_FUNC_START(mte_copy_tags_from_user)
+	mov	x3, x1
+	cbz	x2, 2f
+1:
+USER(2f, ldtrb	w4, [x1])
+	lsl	x4, x4, #MTE_TAG_SHIFT
+	stg	x4, [x0], #MTE_GRANULE_SIZE
+	add	x1, x1, #1
+	subs	x2, x2, #1
+	b.ne	1b
+
+	// exception handling and function return
+2:	sub	x0, x1, x3		// update the number of tags set
+	ret
+SYM_FUNC_END(mte_copy_tags_from_user)
+
+/*
+ * Get the tags from a kernel address range and write the tag values to the
+ * given user buffer (one tag per byte). Used by PTRACE_PEEKMTETAGS.
+ *   x0 - user buffer (to)
+ *   x1 - kernel address (from)
+ *   x2 - number of tags/bytes (n)
+ * Returns:
+ *   x0 - number of tags read/set
+ */
+SYM_FUNC_START(mte_copy_tags_to_user)
+	mov	x3, x0
+	cbz	x2, 2f
+1:
+	ldg	x4, [x1]
+	ubfx	x4, x4, #MTE_TAG_SHIFT, #MTE_TAG_SIZE
+USER(2f, sttrb	w4, [x0])
+	add	x0, x0, #1
+	add	x1, x1, #MTE_GRANULE_SIZE
+	subs	x2, x2, #1
+	b.ne	1b
+
+	// exception handling and function return
+2:	sub	x0, x0, x3		// update the number of tags copied
+	ret
+SYM_FUNC_END(mte_copy_tags_to_user)
+
+/*
+ * Save the tags in a page
+ *   x0 - page address
+ *   x1 - tag storage, MTE_PAGE_TAG_STORAGE bytes
+ */
+SYM_FUNC_START(mte_save_page_tags)
+	multitag_transfer_size x7, x5
+1:
+	mov	x2, #0
+2:
+	ldgm	x5, [x0]
+	orr	x2, x2, x5
+	add	x0, x0, x7
+	tst	x0, #0xFF		// 16 tag values fit in a register,
+	b.ne	2b			// which is 16*16=256 bytes
+
+	str	x2, [x1], #8
+
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	1b
+
+	ret
+SYM_FUNC_END(mte_save_page_tags)
+
+/*
+ * Restore the tags in a page
+ *   x0 - page address
+ *   x1 - tag storage, MTE_PAGE_TAG_STORAGE bytes
+ */
+SYM_FUNC_START(mte_restore_page_tags)
+	multitag_transfer_size x7, x5
+1:
+	ldr	x2, [x1], #8
+2:
+	stgm	x2, [x0]
+	add	x0, x0, x7
+	tst	x0, #0xFF
+	b.ne	2b
+
+	tst	x0, #(PAGE_SIZE - 1)
+	b.ne	1b
+
+	ret
+SYM_FUNC_END(mte_restore_page_tags)
diff --git a/arch/arm64/lib/strchr.S b/arch/arm64/lib/strchr.S
new file mode 100644
index 000000000..94ee67a6b
--- /dev/null
+++ b/arch/arm64/lib/strchr.S
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/lib/strchr.S
+ *
+ * Copyright (C) 1995-2000 Russell King
+ * Copyright (C) 2013 ARM Ltd.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Find the first occurrence of a character in a string.
+ *
+ * Parameters:
+ *	x0 - str
+ *	x1 - c
+ * Returns:
+ *	x0 - address of first occurrence of 'c' or 0
+ */
+SYM_FUNC_START(__pi_strchr)
+	and	w1, w1, #0xff
+1:	ldrb	w2, [x0], #1
+	cmp	w2, w1
+	ccmp	w2, wzr, #4, ne
+	b.ne	1b
+	sub	x0, x0, #1
+	cmp	w2, w1
+	csel	x0, x0, xzr, eq
+	ret
+SYM_FUNC_END(__pi_strchr)
+
+SYM_FUNC_ALIAS_WEAK(strchr, __pi_strchr)
+EXPORT_SYMBOL_NOKASAN(strchr)
diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S
new file mode 100644
index 000000000..9b89b4533
--- /dev/null
+++ b/arch/arm64/lib/strcmp.S
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2012-2022, Arm Limited.
+ *
+ * Adapted from the original at:
+ * https://github.com/ARM-software/optimized-routines/blob/189dfefe37d54c5b/string/aarch64/strcmp.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64.
+ * MTE compatible.
+ */
+
+#define L(label) .L ## label
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+
+#define src1		x0
+#define src2		x1
+#define result		x0
+
+#define data1		x2
+#define data1w		w2
+#define data2		x3
+#define data2w		w3
+#define has_nul		x4
+#define diff		x5
+#define off1		x5
+#define syndrome	x6
+#define tmp		x6
+#define data3		x7
+#define zeroones	x8
+#define shift		x9
+#define off2		x10
+
+/* On big-endian early bytes are at MSB and on little-endian LSB.
+   LS_FW means shifting towards early bytes.  */
+#ifdef __AARCH64EB__
+# define LS_FW lsl
+#else
+# define LS_FW lsr
+#endif
+
+/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+   can be done in parallel across the entire word.
+   Since carry propagation makes 0x1 bytes before a NUL byte appear
+   NUL too in big-endian, byte-reverse the data before the NUL check.  */
+
+
+SYM_FUNC_START(__pi_strcmp)
+	sub	off2, src2, src1
+	mov	zeroones, REP8_01
+	and	tmp, src1, 7
+	tst	off2, 7
+	b.ne	L(misaligned8)
+	cbnz	tmp, L(mutual_align)
+
+	.p2align 4
+
+L(loop_aligned):
+	ldr	data2, [src1, off2]
+	ldr	data1, [src1], 8
+L(start_realigned):
+#ifdef __AARCH64EB__
+	rev	tmp, data1
+	sub	has_nul, tmp, zeroones
+	orr	tmp, tmp, REP8_7f
+#else
+	sub	has_nul, data1, zeroones
+	orr	tmp, data1, REP8_7f
+#endif
+	bics	has_nul, has_nul, tmp	/* Non-zero if NUL terminator.  */
+	ccmp	data1, data2, 0, eq
+	b.eq	L(loop_aligned)
+#ifdef __AARCH64EB__
+	rev	has_nul, has_nul
+#endif
+	eor	diff, data1, data2
+	orr	syndrome, diff, has_nul
+L(end):
+#ifndef __AARCH64EB__
+	rev	syndrome, syndrome
+	rev	data1, data1
+	rev	data2, data2
+#endif
+	clz	shift, syndrome
+	/* The most-significant-non-zero bit of the syndrome marks either the
+	   first bit that is different, or the top bit of the first zero byte.
+	   Shifting left now will bring the critical information into the
+	   top bits.  */
+	lsl	data1, data1, shift
+	lsl	data2, data2, shift
+	/* But we need to zero-extend (char is unsigned) the value and then
+	   perform a signed 32-bit subtraction.  */
+	lsr	data1, data1, 56
+	sub	result, data1, data2, lsr 56
+	ret
+
+	.p2align 4
+
+L(mutual_align):
+	/* Sources are mutually aligned, but are not currently at an
+	   alignment boundary.  Round down the addresses and then mask off
+	   the bytes that precede the start point.  */
+	bic	src1, src1, 7
+	ldr	data2, [src1, off2]
+	ldr	data1, [src1], 8
+	neg	shift, src2, lsl 3	/* Bits to alignment -64.  */
+	mov	tmp, -1
+	LS_FW	tmp, tmp, shift
+	orr	data1, data1, tmp
+	orr	data2, data2, tmp
+	b	L(start_realigned)
+
+L(misaligned8):
+	/* Align SRC1 to 8 bytes and then compare 8 bytes at a time, always
+	   checking to make sure that we don't access beyond the end of SRC2.  */
+	cbz	tmp, L(src1_aligned)
+L(do_misaligned):
+	ldrb	data1w, [src1], 1
+	ldrb	data2w, [src2], 1
+	cmp	data1w, 0
+	ccmp	data1w, data2w, 0, ne	/* NZCV = 0b0000.  */
+	b.ne	L(done)
+	tst	src1, 7
+	b.ne	L(do_misaligned)
+
+L(src1_aligned):
+	neg	shift, src2, lsl 3
+	bic	src2, src2, 7
+	ldr	data3, [src2], 8
+#ifdef __AARCH64EB__
+	rev	data3, data3
+#endif
+	lsr	tmp, zeroones, shift
+	orr	data3, data3, tmp
+	sub	has_nul, data3, zeroones
+	orr	tmp, data3, REP8_7f
+	bics	has_nul, has_nul, tmp
+	b.ne	L(tail)
+
+	sub	off1, src2, src1
+
+	.p2align 4
+
+L(loop_unaligned):
+	ldr	data3, [src1, off1]
+	ldr	data2, [src1, off2]
+#ifdef __AARCH64EB__
+	rev	data3, data3
+#endif
+	sub	has_nul, data3, zeroones
+	orr	tmp, data3, REP8_7f
+	ldr	data1, [src1], 8
+	bics	has_nul, has_nul, tmp
+	ccmp	data1, data2, 0, eq
+	b.eq	L(loop_unaligned)
+
+	lsl	tmp, has_nul, shift
+#ifdef __AARCH64EB__
+	rev	tmp, tmp
+#endif
+	eor	diff, data1, data2
+	orr	syndrome, diff, tmp
+	cbnz	syndrome, L(end)
+L(tail):
+	ldr	data1, [src1]
+	neg	shift, shift
+	lsr	data2, data3, shift
+	lsr	has_nul, has_nul, shift
+#ifdef __AARCH64EB__
+	rev     data2, data2
+	rev	has_nul, has_nul
+#endif
+	eor	diff, data1, data2
+	orr	syndrome, diff, has_nul
+	b	L(end)
+
+L(done):
+	sub	result, data1, data2
+	ret
+SYM_FUNC_END(__pi_strcmp)
+SYM_FUNC_ALIAS_WEAK(strcmp, __pi_strcmp)
+EXPORT_SYMBOL_NOKASAN(strcmp)
diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S
new file mode 100644
index 000000000..4919fe81a
--- /dev/null
+++ b/arch/arm64/lib/strlen.S
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2013-2021, Arm Limited.
+ *
+ * Adapted from the original at:
+ * https://github.com/ARM-software/optimized-routines/blob/98e4d6a5c13c8e54/string/aarch64/strlen.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/mte-def.h>
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64, unaligned accesses, min page size 4k.
+ */
+
+#define L(label) .L ## label
+
+/* Arguments and results.  */
+#define srcin		x0
+#define len		x0
+
+/* Locals and temporaries.  */
+#define src		x1
+#define data1		x2
+#define data2		x3
+#define has_nul1	x4
+#define has_nul2	x5
+#define tmp1		x4
+#define tmp2		x5
+#define tmp3		x6
+#define tmp4		x7
+#define zeroones	x8
+
+	/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+	   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+	   can be done in parallel across the entire word. A faster check
+	   (X - 1) & 0x80 is zero for non-NUL ASCII characters, but gives
+	   false hits for characters 129..255.	*/
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+#define REP8_80 0x8080808080808080
+
+/*
+ * When KASAN_HW_TAGS is in use, memory is checked at MTE_GRANULE_SIZE
+ * (16-byte) granularity, and we must ensure that no access straddles this
+ * alignment boundary.
+ */
+#ifdef CONFIG_KASAN_HW_TAGS
+#define MIN_PAGE_SIZE MTE_GRANULE_SIZE
+#else
+#define MIN_PAGE_SIZE 4096
+#endif
+
+	/* Since strings are short on average, we check the first 16 bytes
+	   of the string for a NUL character.  In order to do an unaligned ldp
+	   safely we have to do a page cross check first.  If there is a NUL
+	   byte we calculate the length from the 2 8-byte words using
+	   conditional select to reduce branch mispredictions (it is unlikely
+	   strlen will be repeatedly called on strings with the same length).
+
+	   If the string is longer than 16 bytes, we align src so don't need
+	   further page cross checks, and process 32 bytes per iteration
+	   using the fast NUL check.  If we encounter non-ASCII characters,
+	   fallback to a second loop using the full NUL check.
+
+	   If the page cross check fails, we read 16 bytes from an aligned
+	   address, remove any characters before the string, and continue
+	   in the main loop using aligned loads.  Since strings crossing a
+	   page in the first 16 bytes are rare (probability of
+	   16/MIN_PAGE_SIZE ~= 0.4%), this case does not need to be optimized.
+
+	   AArch64 systems have a minimum page size of 4k.  We don't bother
+	   checking for larger page sizes - the cost of setting up the correct
+	   page size is just not worth the extra gain from a small reduction in
+	   the cases taking the slow path.  Note that we only care about
+	   whether the first fetch, which may be misaligned, crosses a page
+	   boundary.  */
+
+SYM_FUNC_START(__pi_strlen)
+	and	tmp1, srcin, MIN_PAGE_SIZE - 1
+	mov	zeroones, REP8_01
+	cmp	tmp1, MIN_PAGE_SIZE - 16
+	b.gt	L(page_cross)
+	ldp	data1, data2, [srcin]
+#ifdef __AARCH64EB__
+	/* For big-endian, carry propagation (if the final byte in the
+	   string is 0x01) means we cannot use has_nul1/2 directly.
+	   Since we expect strings to be small and early-exit,
+	   byte-swap the data now so has_null1/2 will be correct.  */
+	rev	data1, data1
+	rev	data2, data2
+#endif
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, REP8_7f
+	sub	tmp3, data2, zeroones
+	orr	tmp4, data2, REP8_7f
+	bics	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	ccmp	has_nul2, 0, 0, eq
+	beq	L(main_loop_entry)
+
+	/* Enter with C = has_nul1 == 0.  */
+	csel	has_nul1, has_nul1, has_nul2, cc
+	mov	len, 8
+	rev	has_nul1, has_nul1
+	clz	tmp1, has_nul1
+	csel	len, xzr, len, cc
+	add	len, len, tmp1, lsr 3
+	ret
+
+	/* The inner loop processes 32 bytes per iteration and uses the fast
+	   NUL check.  If we encounter non-ASCII characters, use a second
+	   loop with the accurate NUL check.  */
+	.p2align 4
+L(main_loop_entry):
+	bic	src, srcin, 15
+	sub	src, src, 16
+L(main_loop):
+	ldp	data1, data2, [src, 32]!
+L(page_cross_entry):
+	sub	tmp1, data1, zeroones
+	sub	tmp3, data2, zeroones
+	orr	tmp2, tmp1, tmp3
+	tst	tmp2, zeroones, lsl 7
+	bne	1f
+	ldp	data1, data2, [src, 16]
+	sub	tmp1, data1, zeroones
+	sub	tmp3, data2, zeroones
+	orr	tmp2, tmp1, tmp3
+	tst	tmp2, zeroones, lsl 7
+	beq	L(main_loop)
+	add	src, src, 16
+1:
+	/* The fast check failed, so do the slower, accurate NUL check.	 */
+	orr	tmp2, data1, REP8_7f
+	orr	tmp4, data2, REP8_7f
+	bics	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	ccmp	has_nul2, 0, 0, eq
+	beq	L(nonascii_loop)
+
+	/* Enter with C = has_nul1 == 0.  */
+L(tail):
+#ifdef __AARCH64EB__
+	/* For big-endian, carry propagation (if the final byte in the
+	   string is 0x01) means we cannot use has_nul1/2 directly.  The
+	   easiest way to get the correct byte is to byte-swap the data
+	   and calculate the syndrome a second time.  */
+	csel	data1, data1, data2, cc
+	rev	data1, data1
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, REP8_7f
+	bic	has_nul1, tmp1, tmp2
+#else
+	csel	has_nul1, has_nul1, has_nul2, cc
+#endif
+	sub	len, src, srcin
+	rev	has_nul1, has_nul1
+	add	tmp2, len, 8
+	clz	tmp1, has_nul1
+	csel	len, len, tmp2, cc
+	add	len, len, tmp1, lsr 3
+	ret
+
+L(nonascii_loop):
+	ldp	data1, data2, [src, 16]!
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, REP8_7f
+	sub	tmp3, data2, zeroones
+	orr	tmp4, data2, REP8_7f
+	bics	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	ccmp	has_nul2, 0, 0, eq
+	bne	L(tail)
+	ldp	data1, data2, [src, 16]!
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, REP8_7f
+	sub	tmp3, data2, zeroones
+	orr	tmp4, data2, REP8_7f
+	bics	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	ccmp	has_nul2, 0, 0, eq
+	beq	L(nonascii_loop)
+	b	L(tail)
+
+	/* Load 16 bytes from [srcin & ~15] and force the bytes that precede
+	   srcin to 0x7f, so we ignore any NUL bytes before the string.
+	   Then continue in the aligned loop.  */
+L(page_cross):
+	bic	src, srcin, 15
+	ldp	data1, data2, [src]
+	lsl	tmp1, srcin, 3
+	mov	tmp4, -1
+#ifdef __AARCH64EB__
+	/* Big-endian.	Early bytes are at MSB.	 */
+	lsr	tmp1, tmp4, tmp1	/* Shift (tmp1 & 63).  */
+#else
+	/* Little-endian.  Early bytes are at LSB.  */
+	lsl	tmp1, tmp4, tmp1	/* Shift (tmp1 & 63).  */
+#endif
+	orr	tmp1, tmp1, REP8_80
+	orn	data1, data1, tmp1
+	orn	tmp2, data2, tmp1
+	tst	srcin, 8
+	csel	data1, data1, tmp4, eq
+	csel	data2, data2, tmp2, eq
+	b	L(page_cross_entry)
+SYM_FUNC_END(__pi_strlen)
+SYM_FUNC_ALIAS_WEAK(strlen, __pi_strlen)
+EXPORT_SYMBOL_NOKASAN(strlen)
diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S
new file mode 100644
index 000000000..fe7bbc0b4
--- /dev/null
+++ b/arch/arm64/lib/strncmp.S
@@ -0,0 +1,310 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2013-2022, Arm Limited.
+ *
+ * Adapted from the original at:
+ * https://github.com/ARM-software/optimized-routines/blob/189dfefe37d54c5b/string/aarch64/strncmp.S
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64.
+ * MTE compatible.
+ */
+
+#define L(label) .L ## label
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+
+/* Parameters and result.  */
+#define src1		x0
+#define src2		x1
+#define limit		x2
+#define result		x0
+
+/* Internal variables.  */
+#define data1		x3
+#define data1w		w3
+#define data2		x4
+#define data2w		w4
+#define has_nul		x5
+#define diff		x6
+#define syndrome	x7
+#define tmp1		x8
+#define tmp2		x9
+#define tmp3		x10
+#define zeroones	x11
+#define pos		x12
+#define mask		x13
+#define endloop		x14
+#define count		mask
+#define offset		pos
+#define neg_offset	x15
+
+/* Define endian dependent shift operations.
+   On big-endian early bytes are at MSB and on little-endian LSB.
+   LS_FW means shifting towards early bytes.
+   LS_BK means shifting towards later bytes.
+   */
+#ifdef __AARCH64EB__
+#define LS_FW lsl
+#define LS_BK lsr
+#else
+#define LS_FW lsr
+#define LS_BK lsl
+#endif
+
+SYM_FUNC_START(__pi_strncmp)
+	cbz	limit, L(ret0)
+	eor	tmp1, src1, src2
+	mov	zeroones, #REP8_01
+	tst	tmp1, #7
+	and	count, src1, #7
+	b.ne	L(misaligned8)
+	cbnz	count, L(mutual_align)
+
+	/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+	   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+	   can be done in parallel across the entire word.  */
+	.p2align 4
+L(loop_aligned):
+	ldr	data1, [src1], #8
+	ldr	data2, [src2], #8
+L(start_realigned):
+	subs	limit, limit, #8
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, #REP8_7f
+	eor	diff, data1, data2	/* Non-zero if differences found.  */
+	csinv	endloop, diff, xzr, hi	/* Last Dword or differences.  */
+	bics	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
+	ccmp	endloop, #0, #0, eq
+	b.eq	L(loop_aligned)
+	/* End of main loop */
+
+L(full_check):
+#ifndef __AARCH64EB__
+	orr	syndrome, diff, has_nul
+	add	limit, limit, 8	/* Rewind limit to before last subs. */
+L(syndrome_check):
+	/* Limit was reached. Check if the NUL byte or the difference
+	   is before the limit. */
+	rev	syndrome, syndrome
+	rev	data1, data1
+	clz	pos, syndrome
+	rev	data2, data2
+	lsl	data1, data1, pos
+	cmp	limit, pos, lsr #3
+	lsl	data2, data2, pos
+	/* But we need to zero-extend (char is unsigned) the value and then
+	   perform a signed 32-bit subtraction.  */
+	lsr	data1, data1, #56
+	sub	result, data1, data2, lsr #56
+	csel result, result, xzr, hi
+	ret
+#else
+	/* Not reached the limit, must have found the end or a diff.  */
+	tbz	limit, #63, L(not_limit)
+	add	tmp1, limit, 8
+	cbz	limit, L(not_limit)
+
+	lsl	limit, tmp1, #3	/* Bits -> bytes.  */
+	mov	mask, #~0
+	lsr	mask, mask, limit
+	bic	data1, data1, mask
+	bic	data2, data2, mask
+
+	/* Make sure that the NUL byte is marked in the syndrome.  */
+	orr	has_nul, has_nul, mask
+
+L(not_limit):
+	/* For big-endian we cannot use the trick with the syndrome value
+	   as carry-propagation can corrupt the upper bits if the trailing
+	   bytes in the string contain 0x01.  */
+	/* However, if there is no NUL byte in the dword, we can generate
+	   the result directly.  We can't just subtract the bytes as the
+	   MSB might be significant.  */
+	cbnz	has_nul, 1f
+	cmp	data1, data2
+	cset	result, ne
+	cneg	result, result, lo
+	ret
+1:
+	/* Re-compute the NUL-byte detection, using a byte-reversed value.  */
+	rev	tmp3, data1
+	sub	tmp1, tmp3, zeroones
+	orr	tmp2, tmp3, #REP8_7f
+	bic	has_nul, tmp1, tmp2
+	rev	has_nul, has_nul
+	orr	syndrome, diff, has_nul
+	clz	pos, syndrome
+	/* The most-significant-non-zero bit of the syndrome marks either the
+	   first bit that is different, or the top bit of the first zero byte.
+	   Shifting left now will bring the critical information into the
+	   top bits.  */
+L(end_quick):
+	lsl	data1, data1, pos
+	lsl	data2, data2, pos
+	/* But we need to zero-extend (char is unsigned) the value and then
+	   perform a signed 32-bit subtraction.  */
+	lsr	data1, data1, #56
+	sub	result, data1, data2, lsr #56
+	ret
+#endif
+
+L(mutual_align):
+	/* Sources are mutually aligned, but are not currently at an
+	   alignment boundary.  Round down the addresses and then mask off
+	   the bytes that precede the start point.
+	   We also need to adjust the limit calculations, but without
+	   overflowing if the limit is near ULONG_MAX.  */
+	bic	src1, src1, #7
+	bic	src2, src2, #7
+	ldr	data1, [src1], #8
+	neg	tmp3, count, lsl #3	/* 64 - bits(bytes beyond align). */
+	ldr	data2, [src2], #8
+	mov	tmp2, #~0
+	LS_FW	tmp2, tmp2, tmp3	/* Shift (count & 63).  */
+	/* Adjust the limit and ensure it doesn't overflow.  */
+	adds	limit, limit, count
+	csinv	limit, limit, xzr, lo
+	orr	data1, data1, tmp2
+	orr	data2, data2, tmp2
+	b	L(start_realigned)
+
+	.p2align 4
+	/* Don't bother with dwords for up to 16 bytes.  */
+L(misaligned8):
+	cmp	limit, #16
+	b.hs	L(try_misaligned_words)
+
+L(byte_loop):
+	/* Perhaps we can do better than this.  */
+	ldrb	data1w, [src1], #1
+	ldrb	data2w, [src2], #1
+	subs	limit, limit, #1
+	ccmp	data1w, #1, #0, hi	/* NZCV = 0b0000.  */
+	ccmp	data1w, data2w, #0, cs	/* NZCV = 0b0000.  */
+	b.eq	L(byte_loop)
+L(done):
+	sub	result, data1, data2
+	ret
+	/* Align the SRC1 to a dword by doing a bytewise compare and then do
+	   the dword loop.  */
+L(try_misaligned_words):
+	cbz	count, L(src1_aligned)
+
+	neg	count, count
+	and	count, count, #7
+	sub	limit, limit, count
+
+L(page_end_loop):
+	ldrb	data1w, [src1], #1
+	ldrb	data2w, [src2], #1
+	cmp	data1w, #1
+	ccmp	data1w, data2w, #0, cs	/* NZCV = 0b0000.  */
+	b.ne	L(done)
+	subs	count, count, #1
+	b.hi	L(page_end_loop)
+
+	/* The following diagram explains the comparison of misaligned strings.
+	   The bytes are shown in natural order. For little-endian, it is
+	   reversed in the registers. The "x" bytes are before the string.
+	   The "|" separates data that is loaded at one time.
+	   src1     | a a a a a a a a | b b b c c c c c | . . .
+	   src2     | x x x x x a a a   a a a a a b b b | c c c c c . . .
+
+	   After shifting in each step, the data looks like this:
+	                STEP_A              STEP_B              STEP_C
+	   data1    a a a a a a a a     b b b c c c c c     b b b c c c c c
+	   data2    a a a a a a a a     b b b 0 0 0 0 0     0 0 0 c c c c c
+
+	   The bytes with "0" are eliminated from the syndrome via mask.
+
+	   Align SRC2 down to 16 bytes. This way we can read 16 bytes at a
+	   time from SRC2. The comparison happens in 3 steps. After each step
+	   the loop can exit, or read from SRC1 or SRC2. */
+L(src1_aligned):
+	/* Calculate offset from 8 byte alignment to string start in bits. No
+	   need to mask offset since shifts are ignoring upper bits. */
+	lsl	offset, src2, #3
+	bic	src2, src2, #0xf
+	mov	mask, -1
+	neg	neg_offset, offset
+	ldr	data1, [src1], #8
+	ldp	tmp1, tmp2, [src2], #16
+	LS_BK	mask, mask, neg_offset
+	and	neg_offset, neg_offset, #63	/* Need actual value for cmp later. */
+	/* Skip the first compare if data in tmp1 is irrelevant. */
+	tbnz	offset, 6, L(misaligned_mid_loop)
+
+L(loop_misaligned):
+	/* STEP_A: Compare full 8 bytes when there is enough data from SRC2.*/
+	LS_FW	data2, tmp1, offset
+	LS_BK	tmp1, tmp2, neg_offset
+	subs	limit, limit, #8
+	orr	data2, data2, tmp1	/* 8 bytes from SRC2 combined from two regs.*/
+	sub	has_nul, data1, zeroones
+	eor	diff, data1, data2	/* Non-zero if differences found.  */
+	orr	tmp3, data1, #REP8_7f
+	csinv	endloop, diff, xzr, hi	/* If limit, set to all ones. */
+	bic	has_nul, has_nul, tmp3	/* Non-zero if NUL byte found in SRC1. */
+	orr	tmp3, endloop, has_nul
+	cbnz	tmp3, L(full_check)
+
+	ldr	data1, [src1], #8
+L(misaligned_mid_loop):
+	/* STEP_B: Compare first part of data1 to second part of tmp2. */
+	LS_FW	data2, tmp2, offset
+#ifdef __AARCH64EB__
+	/* For big-endian we do a byte reverse to avoid carry-propagation
+	problem described above. This way we can reuse the has_nul in the
+	next step and also use syndrome value trick at the end. */
+	rev	tmp3, data1
+	#define data1_fixed tmp3
+#else
+	#define data1_fixed data1
+#endif
+	sub	has_nul, data1_fixed, zeroones
+	orr	tmp3, data1_fixed, #REP8_7f
+	eor	diff, data2, data1	/* Non-zero if differences found.  */
+	bic	has_nul, has_nul, tmp3	/* Non-zero if NUL terminator.  */
+#ifdef __AARCH64EB__
+	rev	has_nul, has_nul
+#endif
+	cmp	limit, neg_offset, lsr #3
+	orr	syndrome, diff, has_nul
+	bic	syndrome, syndrome, mask	/* Ignore later bytes. */
+	csinv	tmp3, syndrome, xzr, hi	/* If limit, set to all ones. */
+	cbnz	tmp3, L(syndrome_check)
+
+	/* STEP_C: Compare second part of data1 to first part of tmp1. */
+	ldp	tmp1, tmp2, [src2], #16
+	cmp	limit, #8
+	LS_BK	data2, tmp1, neg_offset
+	eor	diff, data2, data1	/* Non-zero if differences found.  */
+	orr	syndrome, diff, has_nul
+	and	syndrome, syndrome, mask	/* Ignore earlier bytes. */
+	csinv	tmp3, syndrome, xzr, hi	/* If limit, set to all ones. */
+	cbnz	tmp3, L(syndrome_check)
+
+	ldr	data1, [src1], #8
+	sub	limit, limit, #8
+	b	L(loop_misaligned)
+
+#ifdef	__AARCH64EB__
+L(syndrome_check):
+	clz	pos, syndrome
+	cmp	pos, limit, lsl #3
+	b.lo	L(end_quick)
+#endif
+
+L(ret0):
+	mov	result, #0
+	ret
+SYM_FUNC_END(__pi_strncmp)
+SYM_FUNC_ALIAS_WEAK(strncmp, __pi_strncmp)
+EXPORT_SYMBOL_NOKASAN(strncmp)
diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S
new file mode 100644
index 000000000..d5ac0e10a
--- /dev/null
+++ b/arch/arm64/lib/strnlen.S
@@ -0,0 +1,162 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 ARM Ltd.
+ * Copyright (C) 2013 Linaro.
+ *
+ * This code is based on glibc cortex strings work originally authored by Linaro
+ * be found @
+ *
+ * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/
+ * files/head:/src/aarch64/
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * determine the length of a fixed-size string
+ *
+ * Parameters:
+ *	x0 - const string pointer
+ *	x1 - maximal string length
+ * Returns:
+ *	x0 - the return length of specific string
+ */
+
+/* Arguments and results.  */
+srcin		.req	x0
+len		.req	x0
+limit		.req	x1
+
+/* Locals and temporaries.  */
+src		.req	x2
+data1		.req	x3
+data2		.req	x4
+data2a		.req	x5
+has_nul1	.req	x6
+has_nul2	.req	x7
+tmp1		.req	x8
+tmp2		.req	x9
+tmp3		.req	x10
+tmp4		.req	x11
+zeroones	.req	x12
+pos		.req	x13
+limit_wd	.req	x14
+
+#define REP8_01 0x0101010101010101
+#define REP8_7f 0x7f7f7f7f7f7f7f7f
+#define REP8_80 0x8080808080808080
+
+SYM_FUNC_START(__pi_strnlen)
+	cbz	limit, .Lhit_limit
+	mov	zeroones, #REP8_01
+	bic	src, srcin, #15
+	ands	tmp1, srcin, #15
+	b.ne	.Lmisaligned
+	/* Calculate the number of full and partial words -1.  */
+	sub	limit_wd, limit, #1 /* Limit != 0, so no underflow.  */
+	lsr	limit_wd, limit_wd, #4  /* Convert to Qwords.  */
+
+	/*
+	* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+	* (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+	* can be done in parallel across the entire word.
+	*/
+	/*
+	* The inner loop deals with two Dwords at a time.  This has a
+	* slightly higher start-up cost, but we should win quite quickly,
+	* especially on cores with a high number of issue slots per
+	* cycle, as we get much better parallelism out of the operations.
+	*/
+.Lloop:
+	ldp	data1, data2, [src], #16
+.Lrealigned:
+	sub	tmp1, data1, zeroones
+	orr	tmp2, data1, #REP8_7f
+	sub	tmp3, data2, zeroones
+	orr	tmp4, data2, #REP8_7f
+	bic	has_nul1, tmp1, tmp2
+	bic	has_nul2, tmp3, tmp4
+	subs	limit_wd, limit_wd, #1
+	orr	tmp1, has_nul1, has_nul2
+	ccmp	tmp1, #0, #0, pl    /* NZCV = 0000  */
+	b.eq	.Lloop
+
+	cbz	tmp1, .Lhit_limit   /* No null in final Qword.  */
+
+	/*
+	* We know there's a null in the final Qword. The easiest thing
+	* to do now is work out the length of the string and return
+	* MIN (len, limit).
+	*/
+	sub	len, src, srcin
+	cbz	has_nul1, .Lnul_in_data2
+CPU_BE( mov	data2, data1 )	/*perpare data to re-calculate the syndrome*/
+
+	sub	len, len, #8
+	mov	has_nul2, has_nul1
+.Lnul_in_data2:
+	/*
+	* For big-endian, carry propagation (if the final byte in the
+	* string is 0x01) means we cannot use has_nul directly.  The
+	* easiest way to get the correct byte is to byte-swap the data
+	* and calculate the syndrome a second time.
+	*/
+CPU_BE( rev	data2, data2 )
+CPU_BE( sub	tmp1, data2, zeroones )
+CPU_BE( orr	tmp2, data2, #REP8_7f )
+CPU_BE( bic	has_nul2, tmp1, tmp2 )
+
+	sub	len, len, #8
+	rev	has_nul2, has_nul2
+	clz	pos, has_nul2
+	add	len, len, pos, lsr #3       /* Bits to bytes.  */
+	cmp	len, limit
+	csel	len, len, limit, ls     /* Return the lower value.  */
+	ret
+
+.Lmisaligned:
+	/*
+	* Deal with a partial first word.
+	* We're doing two things in parallel here;
+	* 1) Calculate the number of words (but avoiding overflow if
+	* limit is near ULONG_MAX) - to do this we need to work out
+	* limit + tmp1 - 1 as a 65-bit value before shifting it;
+	* 2) Load and mask the initial data words - we force the bytes
+	* before the ones we are interested in to 0xff - this ensures
+	* early bytes will not hit any zero detection.
+	*/
+	ldp	data1, data2, [src], #16
+
+	sub	limit_wd, limit, #1
+	and	tmp3, limit_wd, #15
+	lsr	limit_wd, limit_wd, #4
+
+	add	tmp3, tmp3, tmp1
+	add	limit_wd, limit_wd, tmp3, lsr #4
+
+	neg	tmp4, tmp1
+	lsl	tmp4, tmp4, #3  /* Bytes beyond alignment -> bits.  */
+
+	mov	tmp2, #~0
+	/* Big-endian.  Early bytes are at MSB.  */
+CPU_BE( lsl	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
+	/* Little-endian.  Early bytes are at LSB.  */
+CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
+
+	cmp	tmp1, #8
+
+	orr	data1, data1, tmp2
+	orr	data2a, data2, tmp2
+
+	csinv	data1, data1, xzr, le
+	csel	data2, data2, data2a, le
+	b	.Lrealigned
+
+.Lhit_limit:
+	mov	len, limit
+	ret
+SYM_FUNC_END(__pi_strnlen)
+
+SYM_FUNC_ALIAS_WEAK(strnlen, __pi_strnlen)
+EXPORT_SYMBOL_NOKASAN(strnlen)
diff --git a/arch/arm64/lib/strrchr.S b/arch/arm64/lib/strrchr.S
new file mode 100644
index 000000000..a5123cf0c
--- /dev/null
+++ b/arch/arm64/lib/strrchr.S
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/lib/strrchr.S
+ *
+ * Copyright (C) 1995-2000 Russell King
+ * Copyright (C) 2013 ARM Ltd.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Find the last occurrence of a character in a string.
+ *
+ * Parameters:
+ *	x0 - str
+ *	x1 - c
+ * Returns:
+ *	x0 - address of last occurrence of 'c' or 0
+ */
+SYM_FUNC_START(__pi_strrchr)
+	mov	x3, #0
+	and	w1, w1, #0xff
+1:	ldrb	w2, [x0], #1
+	cbz	w2, 2f
+	cmp	w2, w1
+	b.ne	1b
+	sub	x3, x0, #1
+	b	1b
+2:	mov	x0, x3
+	ret
+SYM_FUNC_END(__pi_strrchr)
+SYM_FUNC_ALIAS_WEAK(strrchr, __pi_strrchr)
+EXPORT_SYMBOL_NOKASAN(strrchr)
diff --git a/arch/arm64/lib/tishift.S b/arch/arm64/lib/tishift.S
new file mode 100644
index 000000000..a88613834
--- /dev/null
+++ b/arch/arm64/lib/tishift.S
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+ *
+ * Copyright (C) 2017-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+SYM_FUNC_START(__ashlti3)
+	cbz	x2, 1f
+	mov	x3, #64
+	sub	x3, x3, x2
+	cmp	x3, #0
+	b.le	2f
+	lsl	x1, x1, x2
+	lsr	x3, x0, x3
+	lsl	x2, x0, x2
+	orr	x1, x1, x3
+	mov	x0, x2
+1:
+	ret
+2:
+	neg	w1, w3
+	mov	x2, #0
+	lsl	x1, x0, x1
+	mov	x0, x2
+	ret
+SYM_FUNC_END(__ashlti3)
+EXPORT_SYMBOL(__ashlti3)
+
+SYM_FUNC_START(__ashrti3)
+	cbz	x2, 1f
+	mov	x3, #64
+	sub	x3, x3, x2
+	cmp	x3, #0
+	b.le	2f
+	lsr	x0, x0, x2
+	lsl	x3, x1, x3
+	asr	x2, x1, x2
+	orr	x0, x0, x3
+	mov	x1, x2
+1:
+	ret
+2:
+	neg	w0, w3
+	asr	x2, x1, #63
+	asr	x0, x1, x0
+	mov	x1, x2
+	ret
+SYM_FUNC_END(__ashrti3)
+EXPORT_SYMBOL(__ashrti3)
+
+SYM_FUNC_START(__lshrti3)
+	cbz	x2, 1f
+	mov	x3, #64
+	sub	x3, x3, x2
+	cmp	x3, #0
+	b.le	2f
+	lsr	x0, x0, x2
+	lsl	x3, x1, x3
+	lsr	x2, x1, x2
+	orr	x0, x0, x3
+	mov	x1, x2
+1:
+	ret
+2:
+	neg	w0, w3
+	mov	x2, #0
+	lsr	x0, x1, x0
+	mov	x1, x2
+	ret
+SYM_FUNC_END(__lshrti3)
+EXPORT_SYMBOL(__lshrti3)
diff --git a/arch/arm64/lib/uaccess_flushcache.c b/arch/arm64/lib/uaccess_flushcache.c
new file mode 100644
index 000000000..7510d1a23
--- /dev/null
+++ b/arch/arm64/lib/uaccess_flushcache.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 ARM Ltd.
+ */
+
+#include <linux/uaccess.h>
+#include <asm/barrier.h>
+#include <asm/cacheflush.h>
+
+void memcpy_flushcache(void *dst, const void *src, size_t cnt)
+{
+	/*
+	 * We assume this should not be called with @dst pointing to
+	 * non-cacheable memory, such that we don't need an explicit
+	 * barrier to order the cache maintenance against the memcpy.
+	 */
+	memcpy(dst, src, cnt);
+	dcache_clean_pop((unsigned long)dst, (unsigned long)dst + cnt);
+}
+EXPORT_SYMBOL_GPL(memcpy_flushcache);
+
+unsigned long __copy_user_flushcache(void *to, const void __user *from,
+				     unsigned long n)
+{
+	unsigned long rc;
+
+	rc = raw_copy_from_user(to, from, n);
+
+	/* See above */
+	dcache_clean_pop((unsigned long)to, (unsigned long)to + n - rc);
+	return rc;
+}
diff --git a/arch/arm64/lib/xor-neon.c b/arch/arm64/lib/xor-neon.c
new file mode 100644
index 000000000..f9a53b7f9
--- /dev/null
+++ b/arch/arm64/lib/xor-neon.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/lib/xor-neon.c
+ *
+ * Authors: Jackie Liu <liuyun01@kylinos.cn>
+ * Copyright (C) 2018,Tianjin KYLIN Information Technology Co., Ltd.
+ */
+
+#include <linux/raid/xor.h>
+#include <linux/module.h>
+#include <asm/neon-intrinsics.h>
+
+static void xor_arm64_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 */
+		v0 = veorq_u64(vld1q_u64(dp1 +  0), vld1q_u64(dp2 +  0));
+		v1 = veorq_u64(vld1q_u64(dp1 +  2), vld1q_u64(dp2 +  2));
+		v2 = veorq_u64(vld1q_u64(dp1 +  4), vld1q_u64(dp2 +  4));
+		v3 = veorq_u64(vld1q_u64(dp1 +  6), vld1q_u64(dp2 +  6));
+
+		/* store */
+		vst1q_u64(dp1 +  0, v0);
+		vst1q_u64(dp1 +  2, v1);
+		vst1q_u64(dp1 +  4, v2);
+		vst1q_u64(dp1 +  6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+	} while (--lines > 0);
+}
+
+static void xor_arm64_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+	uint64_t *dp3 = (uint64_t *)p3;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 */
+		v0 = veorq_u64(vld1q_u64(dp1 +  0), vld1q_u64(dp2 +  0));
+		v1 = veorq_u64(vld1q_u64(dp1 +  2), vld1q_u64(dp2 +  2));
+		v2 = veorq_u64(vld1q_u64(dp1 +  4), vld1q_u64(dp2 +  4));
+		v3 = veorq_u64(vld1q_u64(dp1 +  6), vld1q_u64(dp2 +  6));
+
+		/* p1 ^= p3 */
+		v0 = veorq_u64(v0, vld1q_u64(dp3 +  0));
+		v1 = veorq_u64(v1, vld1q_u64(dp3 +  2));
+		v2 = veorq_u64(v2, vld1q_u64(dp3 +  4));
+		v3 = veorq_u64(v3, vld1q_u64(dp3 +  6));
+
+		/* store */
+		vst1q_u64(dp1 +  0, v0);
+		vst1q_u64(dp1 +  2, v1);
+		vst1q_u64(dp1 +  4, v2);
+		vst1q_u64(dp1 +  6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+		dp3 += 8;
+	} while (--lines > 0);
+}
+
+static void xor_arm64_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+	uint64_t *dp3 = (uint64_t *)p3;
+	uint64_t *dp4 = (uint64_t *)p4;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 */
+		v0 = veorq_u64(vld1q_u64(dp1 +  0), vld1q_u64(dp2 +  0));
+		v1 = veorq_u64(vld1q_u64(dp1 +  2), vld1q_u64(dp2 +  2));
+		v2 = veorq_u64(vld1q_u64(dp1 +  4), vld1q_u64(dp2 +  4));
+		v3 = veorq_u64(vld1q_u64(dp1 +  6), vld1q_u64(dp2 +  6));
+
+		/* p1 ^= p3 */
+		v0 = veorq_u64(v0, vld1q_u64(dp3 +  0));
+		v1 = veorq_u64(v1, vld1q_u64(dp3 +  2));
+		v2 = veorq_u64(v2, vld1q_u64(dp3 +  4));
+		v3 = veorq_u64(v3, vld1q_u64(dp3 +  6));
+
+		/* p1 ^= p4 */
+		v0 = veorq_u64(v0, vld1q_u64(dp4 +  0));
+		v1 = veorq_u64(v1, vld1q_u64(dp4 +  2));
+		v2 = veorq_u64(v2, vld1q_u64(dp4 +  4));
+		v3 = veorq_u64(v3, vld1q_u64(dp4 +  6));
+
+		/* store */
+		vst1q_u64(dp1 +  0, v0);
+		vst1q_u64(dp1 +  2, v1);
+		vst1q_u64(dp1 +  4, v2);
+		vst1q_u64(dp1 +  6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+		dp3 += 8;
+		dp4 += 8;
+	} while (--lines > 0);
+}
+
+static void xor_arm64_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4,
+	const unsigned long * __restrict p5)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+	uint64_t *dp3 = (uint64_t *)p3;
+	uint64_t *dp4 = (uint64_t *)p4;
+	uint64_t *dp5 = (uint64_t *)p5;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 */
+		v0 = veorq_u64(vld1q_u64(dp1 +  0), vld1q_u64(dp2 +  0));
+		v1 = veorq_u64(vld1q_u64(dp1 +  2), vld1q_u64(dp2 +  2));
+		v2 = veorq_u64(vld1q_u64(dp1 +  4), vld1q_u64(dp2 +  4));
+		v3 = veorq_u64(vld1q_u64(dp1 +  6), vld1q_u64(dp2 +  6));
+
+		/* p1 ^= p3 */
+		v0 = veorq_u64(v0, vld1q_u64(dp3 +  0));
+		v1 = veorq_u64(v1, vld1q_u64(dp3 +  2));
+		v2 = veorq_u64(v2, vld1q_u64(dp3 +  4));
+		v3 = veorq_u64(v3, vld1q_u64(dp3 +  6));
+
+		/* p1 ^= p4 */
+		v0 = veorq_u64(v0, vld1q_u64(dp4 +  0));
+		v1 = veorq_u64(v1, vld1q_u64(dp4 +  2));
+		v2 = veorq_u64(v2, vld1q_u64(dp4 +  4));
+		v3 = veorq_u64(v3, vld1q_u64(dp4 +  6));
+
+		/* p1 ^= p5 */
+		v0 = veorq_u64(v0, vld1q_u64(dp5 +  0));
+		v1 = veorq_u64(v1, vld1q_u64(dp5 +  2));
+		v2 = veorq_u64(v2, vld1q_u64(dp5 +  4));
+		v3 = veorq_u64(v3, vld1q_u64(dp5 +  6));
+
+		/* store */
+		vst1q_u64(dp1 +  0, v0);
+		vst1q_u64(dp1 +  2, v1);
+		vst1q_u64(dp1 +  4, v2);
+		vst1q_u64(dp1 +  6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+		dp3 += 8;
+		dp4 += 8;
+		dp5 += 8;
+	} while (--lines > 0);
+}
+
+struct xor_block_template xor_block_inner_neon __ro_after_init = {
+	.name	= "__inner_neon__",
+	.do_2	= xor_arm64_neon_2,
+	.do_3	= xor_arm64_neon_3,
+	.do_4	= xor_arm64_neon_4,
+	.do_5	= xor_arm64_neon_5,
+};
+EXPORT_SYMBOL(xor_block_inner_neon);
+
+static inline uint64x2_t eor3(uint64x2_t p, uint64x2_t q, uint64x2_t r)
+{
+	uint64x2_t res;
+
+	asm(ARM64_ASM_PREAMBLE ".arch_extension sha3\n"
+	    "eor3 %0.16b, %1.16b, %2.16b, %3.16b"
+	    : "=w"(res) : "w"(p), "w"(q), "w"(r));
+	return res;
+}
+
+static void xor_arm64_eor3_3(unsigned long bytes,
+	unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+	uint64_t *dp3 = (uint64_t *)p3;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 ^ p3 */
+		v0 = eor3(vld1q_u64(dp1 + 0), vld1q_u64(dp2 + 0),
+			  vld1q_u64(dp3 + 0));
+		v1 = eor3(vld1q_u64(dp1 + 2), vld1q_u64(dp2 + 2),
+			  vld1q_u64(dp3 + 2));
+		v2 = eor3(vld1q_u64(dp1 + 4), vld1q_u64(dp2 + 4),
+			  vld1q_u64(dp3 + 4));
+		v3 = eor3(vld1q_u64(dp1 + 6), vld1q_u64(dp2 + 6),
+			  vld1q_u64(dp3 + 6));
+
+		/* store */
+		vst1q_u64(dp1 + 0, v0);
+		vst1q_u64(dp1 + 2, v1);
+		vst1q_u64(dp1 + 4, v2);
+		vst1q_u64(dp1 + 6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+		dp3 += 8;
+	} while (--lines > 0);
+}
+
+static void xor_arm64_eor3_4(unsigned long bytes,
+	unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+	uint64_t *dp3 = (uint64_t *)p3;
+	uint64_t *dp4 = (uint64_t *)p4;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 ^ p3 */
+		v0 = eor3(vld1q_u64(dp1 + 0), vld1q_u64(dp2 + 0),
+			  vld1q_u64(dp3 + 0));
+		v1 = eor3(vld1q_u64(dp1 + 2), vld1q_u64(dp2 + 2),
+			  vld1q_u64(dp3 + 2));
+		v2 = eor3(vld1q_u64(dp1 + 4), vld1q_u64(dp2 + 4),
+			  vld1q_u64(dp3 + 4));
+		v3 = eor3(vld1q_u64(dp1 + 6), vld1q_u64(dp2 + 6),
+			  vld1q_u64(dp3 + 6));
+
+		/* p1 ^= p4 */
+		v0 = veorq_u64(v0, vld1q_u64(dp4 + 0));
+		v1 = veorq_u64(v1, vld1q_u64(dp4 + 2));
+		v2 = veorq_u64(v2, vld1q_u64(dp4 + 4));
+		v3 = veorq_u64(v3, vld1q_u64(dp4 + 6));
+
+		/* store */
+		vst1q_u64(dp1 + 0, v0);
+		vst1q_u64(dp1 + 2, v1);
+		vst1q_u64(dp1 + 4, v2);
+		vst1q_u64(dp1 + 6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+		dp3 += 8;
+		dp4 += 8;
+	} while (--lines > 0);
+}
+
+static void xor_arm64_eor3_5(unsigned long bytes,
+	unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4,
+	const unsigned long * __restrict p5)
+{
+	uint64_t *dp1 = (uint64_t *)p1;
+	uint64_t *dp2 = (uint64_t *)p2;
+	uint64_t *dp3 = (uint64_t *)p3;
+	uint64_t *dp4 = (uint64_t *)p4;
+	uint64_t *dp5 = (uint64_t *)p5;
+
+	register uint64x2_t v0, v1, v2, v3;
+	long lines = bytes / (sizeof(uint64x2_t) * 4);
+
+	do {
+		/* p1 ^= p2 ^ p3 */
+		v0 = eor3(vld1q_u64(dp1 + 0), vld1q_u64(dp2 + 0),
+			  vld1q_u64(dp3 + 0));
+		v1 = eor3(vld1q_u64(dp1 + 2), vld1q_u64(dp2 + 2),
+			  vld1q_u64(dp3 + 2));
+		v2 = eor3(vld1q_u64(dp1 + 4), vld1q_u64(dp2 + 4),
+			  vld1q_u64(dp3 + 4));
+		v3 = eor3(vld1q_u64(dp1 + 6), vld1q_u64(dp2 + 6),
+			  vld1q_u64(dp3 + 6));
+
+		/* p1 ^= p4 ^ p5 */
+		v0 = eor3(v0, vld1q_u64(dp4 + 0), vld1q_u64(dp5 + 0));
+		v1 = eor3(v1, vld1q_u64(dp4 + 2), vld1q_u64(dp5 + 2));
+		v2 = eor3(v2, vld1q_u64(dp4 + 4), vld1q_u64(dp5 + 4));
+		v3 = eor3(v3, vld1q_u64(dp4 + 6), vld1q_u64(dp5 + 6));
+
+		/* store */
+		vst1q_u64(dp1 + 0, v0);
+		vst1q_u64(dp1 + 2, v1);
+		vst1q_u64(dp1 + 4, v2);
+		vst1q_u64(dp1 + 6, v3);
+
+		dp1 += 8;
+		dp2 += 8;
+		dp3 += 8;
+		dp4 += 8;
+		dp5 += 8;
+	} while (--lines > 0);
+}
+
+static int __init xor_neon_init(void)
+{
+	if (IS_ENABLED(CONFIG_AS_HAS_SHA3) && cpu_have_named_feature(SHA3)) {
+		xor_block_inner_neon.do_3 = xor_arm64_eor3_3;
+		xor_block_inner_neon.do_4 = xor_arm64_eor3_4;
+		xor_block_inner_neon.do_5 = xor_arm64_eor3_5;
+	}
+	return 0;
+}
+module_init(xor_neon_init);
+
+static void __exit xor_neon_exit(void)
+{
+}
+module_exit(xor_neon_exit);
+
+MODULE_AUTHOR("Jackie Liu <liuyun01@kylinos.cn>");
+MODULE_DESCRIPTION("ARMv8 XOR Extensions");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm64/mm/Makefile b/arch/arm64/mm/Makefile
new file mode 100644
index 000000000..dbd1bc959
--- /dev/null
+++ b/arch/arm64/mm/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y				:= dma-mapping.o extable.o fault.o init.o \
+				   cache.o copypage.o flush.o \
+				   ioremap.o mmap.o pgd.o mmu.o \
+				   context.o proc.o pageattr.o fixmap.o
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_PTDUMP_CORE)	+= ptdump.o
+obj-$(CONFIG_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
+obj-$(CONFIG_TRANS_TABLE)	+= trans_pgd.o
+obj-$(CONFIG_TRANS_TABLE)	+= trans_pgd-asm.o
+obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
+obj-$(CONFIG_ARM64_MTE)		+= mteswap.o
+KASAN_SANITIZE_physaddr.o	+= n
+
+obj-$(CONFIG_KASAN)		+= kasan_init.o
+KASAN_SANITIZE_kasan_init.o	:= n
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
new file mode 100644
index 000000000..503567c86
--- /dev/null
+++ b/arch/arm64/mm/cache.S
@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Cache maintenance
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
+#include <asm/asm-uaccess.h>
+
+/*
+ *	caches_clean_inval_pou_macro(start,end) [fixup]
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ *	- fixup   - optional label to branch to on user fault
+ */
+.macro	caches_clean_inval_pou_macro, fixup
+alternative_if ARM64_HAS_CACHE_IDC
+	dsb     ishst
+	b       .Ldc_skip_\@
+alternative_else_nop_endif
+	mov     x2, x0
+	mov     x3, x1
+	dcache_by_line_op cvau, ish, x2, x3, x4, x5, \fixup
+.Ldc_skip_\@:
+alternative_if ARM64_HAS_CACHE_DIC
+	isb
+	b	.Lic_skip_\@
+alternative_else_nop_endif
+	invalidate_icache_by_line x0, x1, x2, x3, \fixup
+.Lic_skip_\@:
+.endm
+
+/*
+ *	caches_clean_inval_pou(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(caches_clean_inval_pou)
+	caches_clean_inval_pou_macro
+	ret
+SYM_FUNC_END(caches_clean_inval_pou)
+SYM_FUNC_ALIAS(__pi_caches_clean_inval_pou, caches_clean_inval_pou)
+
+/*
+ *	caches_clean_inval_user_pou(start,end)
+ *
+ *	Ensure that the I and D caches are coherent within specified region.
+ *	This is typically used when code has been written to a memory region,
+ *	and will be executed.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(caches_clean_inval_user_pou)
+	uaccess_ttbr0_enable x2, x3, x4
+
+	caches_clean_inval_pou_macro 2f
+	mov	x0, xzr
+1:
+	uaccess_ttbr0_disable x1, x2
+	ret
+2:
+	mov	x0, #-EFAULT
+	b	1b
+SYM_FUNC_END(caches_clean_inval_user_pou)
+
+/*
+ *	icache_inval_pou(start,end)
+ *
+ *	Ensure that the I cache is invalid within specified region.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(icache_inval_pou)
+alternative_if ARM64_HAS_CACHE_DIC
+	isb
+	ret
+alternative_else_nop_endif
+
+	invalidate_icache_by_line x0, x1, x2, x3
+	ret
+SYM_FUNC_END(icache_inval_pou)
+
+/*
+ *	dcache_clean_inval_poc(start, end)
+ *
+ *	Ensure that any D-cache lines for the interval [start, end)
+ *	are cleaned and invalidated to the PoC.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(__pi_dcache_clean_inval_poc)
+	dcache_by_line_op civac, sy, x0, x1, x2, x3
+	ret
+SYM_FUNC_END(__pi_dcache_clean_inval_poc)
+SYM_FUNC_ALIAS(dcache_clean_inval_poc, __pi_dcache_clean_inval_poc)
+
+/*
+ *	dcache_clean_pou(start, end)
+ *
+ * 	Ensure that any D-cache lines for the interval [start, end)
+ * 	are cleaned to the PoU.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(dcache_clean_pou)
+alternative_if ARM64_HAS_CACHE_IDC
+	dsb	ishst
+	ret
+alternative_else_nop_endif
+	dcache_by_line_op cvau, ish, x0, x1, x2, x3
+	ret
+SYM_FUNC_END(dcache_clean_pou)
+
+/*
+ *	dcache_inval_poc(start, end)
+ *
+ * 	Ensure that any D-cache lines for the interval [start, end)
+ * 	are invalidated. Any partial lines at the ends of the interval are
+ *	also cleaned to PoC to prevent data loss.
+ *
+ *	- start   - kernel start address of region
+ *	- end     - kernel end address of region
+ */
+SYM_FUNC_START(__pi_dcache_inval_poc)
+	dcache_line_size x2, x3
+	sub	x3, x2, #1
+	tst	x1, x3				// end cache line aligned?
+	bic	x1, x1, x3
+	b.eq	1f
+	dc	civac, x1			// clean & invalidate D / U line
+1:	tst	x0, x3				// start cache line aligned?
+	bic	x0, x0, x3
+	b.eq	2f
+	dc	civac, x0			// clean & invalidate D / U line
+	b	3f
+2:	dc	ivac, x0			// invalidate D / U line
+3:	add	x0, x0, x2
+	cmp	x0, x1
+	b.lo	2b
+	dsb	sy
+	ret
+SYM_FUNC_END(__pi_dcache_inval_poc)
+SYM_FUNC_ALIAS(dcache_inval_poc, __pi_dcache_inval_poc)
+
+/*
+ *	dcache_clean_poc(start, end)
+ *
+ * 	Ensure that any D-cache lines for the interval [start, end)
+ * 	are cleaned to the PoC.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(__pi_dcache_clean_poc)
+	dcache_by_line_op cvac, sy, x0, x1, x2, x3
+	ret
+SYM_FUNC_END(__pi_dcache_clean_poc)
+SYM_FUNC_ALIAS(dcache_clean_poc, __pi_dcache_clean_poc)
+
+/*
+ *	dcache_clean_pop(start, end)
+ *
+ * 	Ensure that any D-cache lines for the interval [start, end)
+ * 	are cleaned to the PoP.
+ *
+ *	- start   - virtual start address of region
+ *	- end     - virtual end address of region
+ */
+SYM_FUNC_START(__pi_dcache_clean_pop)
+	alternative_if_not ARM64_HAS_DCPOP
+	b	dcache_clean_poc
+	alternative_else_nop_endif
+	dcache_by_line_op cvap, sy, x0, x1, x2, x3
+	ret
+SYM_FUNC_END(__pi_dcache_clean_pop)
+SYM_FUNC_ALIAS(dcache_clean_pop, __pi_dcache_clean_pop)
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
new file mode 100644
index 000000000..188197590
--- /dev/null
+++ b/arch/arm64/mm/context.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/context.c
+ *
+ * Copyright (C) 2002-2003 Deep Blue Solutions Ltd, all rights reserved.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+
+#include <asm/cpufeature.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+
+static u32 asid_bits;
+static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
+
+static atomic64_t asid_generation;
+static unsigned long *asid_map;
+
+static DEFINE_PER_CPU(atomic64_t, active_asids);
+static DEFINE_PER_CPU(u64, reserved_asids);
+static cpumask_t tlb_flush_pending;
+
+static unsigned long max_pinned_asids;
+static unsigned long nr_pinned_asids;
+static unsigned long *pinned_asid_map;
+
+#define ASID_MASK		(~GENMASK(asid_bits - 1, 0))
+#define ASID_FIRST_VERSION	(1UL << asid_bits)
+
+#define NUM_USER_ASIDS		ASID_FIRST_VERSION
+#define ctxid2asid(asid)	((asid) & ~ASID_MASK)
+#define asid2ctxid(asid, genid)	((asid) | (genid))
+
+/* Get the ASIDBits supported by the current CPU */
+static u32 get_cpu_asid_bits(void)
+{
+	u32 asid;
+	int fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64MMFR0_EL1),
+						ID_AA64MMFR0_EL1_ASIDBITS_SHIFT);
+
+	switch (fld) {
+	default:
+		pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n",
+					smp_processor_id(),  fld);
+		fallthrough;
+	case ID_AA64MMFR0_EL1_ASIDBITS_8:
+		asid = 8;
+		break;
+	case ID_AA64MMFR0_EL1_ASIDBITS_16:
+		asid = 16;
+	}
+
+	return asid;
+}
+
+/* Check if the current cpu's ASIDBits is compatible with asid_bits */
+void verify_cpu_asid_bits(void)
+{
+	u32 asid = get_cpu_asid_bits();
+
+	if (asid < asid_bits) {
+		/*
+		 * We cannot decrease the ASID size at runtime, so panic if we support
+		 * fewer ASID bits than the boot CPU.
+		 */
+		pr_crit("CPU%d: smaller ASID size(%u) than boot CPU (%u)\n",
+				smp_processor_id(), asid, asid_bits);
+		cpu_panic_kernel();
+	}
+}
+
+static void set_kpti_asid_bits(unsigned long *map)
+{
+	unsigned int len = BITS_TO_LONGS(NUM_USER_ASIDS) * sizeof(unsigned long);
+	/*
+	 * In case of KPTI kernel/user ASIDs are allocated in
+	 * pairs, the bottom bit distinguishes the two: if it
+	 * is set, then the ASID will map only userspace. Thus
+	 * mark even as reserved for kernel.
+	 */
+	memset(map, 0xaa, len);
+}
+
+static void set_reserved_asid_bits(void)
+{
+	if (pinned_asid_map)
+		bitmap_copy(asid_map, pinned_asid_map, NUM_USER_ASIDS);
+	else if (arm64_kernel_unmapped_at_el0())
+		set_kpti_asid_bits(asid_map);
+	else
+		bitmap_clear(asid_map, 0, NUM_USER_ASIDS);
+}
+
+#define asid_gen_match(asid) \
+	(!(((asid) ^ atomic64_read(&asid_generation)) >> asid_bits))
+
+static void flush_context(void)
+{
+	int i;
+	u64 asid;
+
+	/* Update the list of reserved ASIDs and the ASID bitmap. */
+	set_reserved_asid_bits();
+
+	for_each_possible_cpu(i) {
+		asid = atomic64_xchg_relaxed(&per_cpu(active_asids, i), 0);
+		/*
+		 * If this CPU has already been through a
+		 * rollover, but hasn't run another task in
+		 * the meantime, we must preserve its reserved
+		 * ASID, as this is the only trace we have of
+		 * the process it is still running.
+		 */
+		if (asid == 0)
+			asid = per_cpu(reserved_asids, i);
+		__set_bit(ctxid2asid(asid), asid_map);
+		per_cpu(reserved_asids, i) = asid;
+	}
+
+	/*
+	 * Queue a TLB invalidation for each CPU to perform on next
+	 * context-switch
+	 */
+	cpumask_setall(&tlb_flush_pending);
+}
+
+static bool check_update_reserved_asid(u64 asid, u64 newasid)
+{
+	int cpu;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved ASIDs looking for a match.
+	 * If we find one, then we can update our mm to use newasid
+	 * (i.e. the same ASID in the current generation) but we can't
+	 * exit the loop early, since we need to ensure that all copies
+	 * of the old ASID are updated to reflect the mm. Failure to do
+	 * so could result in us missing the reserved ASID in a future
+	 * generation.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_asids, cpu) == asid) {
+			hit = true;
+			per_cpu(reserved_asids, cpu) = newasid;
+		}
+	}
+
+	return hit;
+}
+
+static u64 new_context(struct mm_struct *mm)
+{
+	static u32 cur_idx = 1;
+	u64 asid = atomic64_read(&mm->context.id);
+	u64 generation = atomic64_read(&asid_generation);
+
+	if (asid != 0) {
+		u64 newasid = asid2ctxid(ctxid2asid(asid), generation);
+
+		/*
+		 * If our current ASID was active during a rollover, we
+		 * can continue to use it and this was just a false alarm.
+		 */
+		if (check_update_reserved_asid(asid, newasid))
+			return newasid;
+
+		/*
+		 * If it is pinned, we can keep using it. Note that reserved
+		 * takes priority, because even if it is also pinned, we need to
+		 * update the generation into the reserved_asids.
+		 */
+		if (refcount_read(&mm->context.pinned))
+			return newasid;
+
+		/*
+		 * We had a valid ASID in a previous life, so try to re-use
+		 * it if possible.
+		 */
+		if (!__test_and_set_bit(ctxid2asid(asid), asid_map))
+			return newasid;
+	}
+
+	/*
+	 * Allocate a free ASID. If we can't find one, take a note of the
+	 * currently active ASIDs and mark the TLBs as requiring flushes.  We
+	 * always count from ASID #2 (index 1), as we use ASID #0 when setting
+	 * a reserved TTBR0 for the init_mm and we allocate ASIDs in even/odd
+	 * pairs.
+	 */
+	asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx);
+	if (asid != NUM_USER_ASIDS)
+		goto set_asid;
+
+	/* We're out of ASIDs, so increment the global generation count */
+	generation = atomic64_add_return_relaxed(ASID_FIRST_VERSION,
+						 &asid_generation);
+	flush_context();
+
+	/* We have more ASIDs than CPUs, so this will always succeed */
+	asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1);
+
+set_asid:
+	__set_bit(asid, asid_map);
+	cur_idx = asid;
+	return asid2ctxid(asid, generation);
+}
+
+void check_and_switch_context(struct mm_struct *mm)
+{
+	unsigned long flags;
+	unsigned int cpu;
+	u64 asid, old_active_asid;
+
+	if (system_supports_cnp())
+		cpu_set_reserved_ttbr0();
+
+	asid = atomic64_read(&mm->context.id);
+
+	/*
+	 * The memory ordering here is subtle.
+	 * If our active_asids is non-zero and the ASID matches the current
+	 * generation, then we update the active_asids entry with a relaxed
+	 * cmpxchg. Racing with a concurrent rollover means that either:
+	 *
+	 * - We get a zero back from the cmpxchg and end up waiting on the
+	 *   lock. Taking the lock synchronises with the rollover and so
+	 *   we are forced to see the updated generation.
+	 *
+	 * - We get a valid ASID back from the cmpxchg, which means the
+	 *   relaxed xchg in flush_context will treat us as reserved
+	 *   because atomic RmWs are totally ordered for a given location.
+	 */
+	old_active_asid = atomic64_read(this_cpu_ptr(&active_asids));
+	if (old_active_asid && asid_gen_match(asid) &&
+	    atomic64_cmpxchg_relaxed(this_cpu_ptr(&active_asids),
+				     old_active_asid, asid))
+		goto switch_mm_fastpath;
+
+	raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+	/* Check that our ASID belongs to the current generation. */
+	asid = atomic64_read(&mm->context.id);
+	if (!asid_gen_match(asid)) {
+		asid = new_context(mm);
+		atomic64_set(&mm->context.id, asid);
+	}
+
+	cpu = smp_processor_id();
+	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending))
+		local_flush_tlb_all();
+
+	atomic64_set(this_cpu_ptr(&active_asids), asid);
+	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+
+switch_mm_fastpath:
+
+	arm64_apply_bp_hardening();
+
+	/*
+	 * Defer TTBR0_EL1 setting for user threads to uaccess_enable() when
+	 * emulating PAN.
+	 */
+	if (!system_uses_ttbr0_pan())
+		cpu_switch_mm(mm->pgd, mm);
+}
+
+unsigned long arm64_mm_context_get(struct mm_struct *mm)
+{
+	unsigned long flags;
+	u64 asid;
+
+	if (!pinned_asid_map)
+		return 0;
+
+	raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+
+	asid = atomic64_read(&mm->context.id);
+
+	if (refcount_inc_not_zero(&mm->context.pinned))
+		goto out_unlock;
+
+	if (nr_pinned_asids >= max_pinned_asids) {
+		asid = 0;
+		goto out_unlock;
+	}
+
+	if (!asid_gen_match(asid)) {
+		/*
+		 * We went through one or more rollover since that ASID was
+		 * used. Ensure that it is still valid, or generate a new one.
+		 */
+		asid = new_context(mm);
+		atomic64_set(&mm->context.id, asid);
+	}
+
+	nr_pinned_asids++;
+	__set_bit(ctxid2asid(asid), pinned_asid_map);
+	refcount_set(&mm->context.pinned, 1);
+
+out_unlock:
+	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+
+	asid = ctxid2asid(asid);
+
+	/* Set the equivalent of USER_ASID_BIT */
+	if (asid && arm64_kernel_unmapped_at_el0())
+		asid |= 1;
+
+	return asid;
+}
+EXPORT_SYMBOL_GPL(arm64_mm_context_get);
+
+void arm64_mm_context_put(struct mm_struct *mm)
+{
+	unsigned long flags;
+	u64 asid = atomic64_read(&mm->context.id);
+
+	if (!pinned_asid_map)
+		return;
+
+	raw_spin_lock_irqsave(&cpu_asid_lock, flags);
+
+	if (refcount_dec_and_test(&mm->context.pinned)) {
+		__clear_bit(ctxid2asid(asid), pinned_asid_map);
+		nr_pinned_asids--;
+	}
+
+	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
+}
+EXPORT_SYMBOL_GPL(arm64_mm_context_put);
+
+/* Errata workaround post TTBRx_EL1 update. */
+asmlinkage void post_ttbr_update_workaround(void)
+{
+	if (!IS_ENABLED(CONFIG_CAVIUM_ERRATUM_27456))
+		return;
+
+	asm(ALTERNATIVE("nop; nop; nop",
+			"ic iallu; dsb nsh; isb",
+			ARM64_WORKAROUND_CAVIUM_27456));
+}
+
+void cpu_do_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm)
+{
+	unsigned long ttbr1 = read_sysreg(ttbr1_el1);
+	unsigned long asid = ASID(mm);
+	unsigned long ttbr0 = phys_to_ttbr(pgd_phys);
+
+	/* Skip CNP for the reserved ASID */
+	if (system_supports_cnp() && asid)
+		ttbr0 |= TTBR_CNP_BIT;
+
+	/* SW PAN needs a copy of the ASID in TTBR0 for entry */
+	if (IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN))
+		ttbr0 |= FIELD_PREP(TTBR_ASID_MASK, asid);
+
+	/* Set ASID in TTBR1 since TCR.A1 is set */
+	ttbr1 &= ~TTBR_ASID_MASK;
+	ttbr1 |= FIELD_PREP(TTBR_ASID_MASK, asid);
+
+	cpu_set_reserved_ttbr0_nosync();
+	write_sysreg(ttbr1, ttbr1_el1);
+	write_sysreg(ttbr0, ttbr0_el1);
+	isb();
+	post_ttbr_update_workaround();
+}
+
+static int asids_update_limit(void)
+{
+	unsigned long num_available_asids = NUM_USER_ASIDS;
+
+	if (arm64_kernel_unmapped_at_el0()) {
+		num_available_asids /= 2;
+		if (pinned_asid_map)
+			set_kpti_asid_bits(pinned_asid_map);
+	}
+	/*
+	 * Expect allocation after rollover to fail if we don't have at least
+	 * one more ASID than CPUs. ASID #0 is reserved for init_mm.
+	 */
+	WARN_ON(num_available_asids - 1 <= num_possible_cpus());
+	pr_info("ASID allocator initialised with %lu entries\n",
+		num_available_asids);
+
+	/*
+	 * There must always be an ASID available after rollover. Ensure that,
+	 * even if all CPUs have a reserved ASID and the maximum number of ASIDs
+	 * are pinned, there still is at least one empty slot in the ASID map.
+	 */
+	max_pinned_asids = num_available_asids - num_possible_cpus() - 2;
+	return 0;
+}
+arch_initcall(asids_update_limit);
+
+static int asids_init(void)
+{
+	asid_bits = get_cpu_asid_bits();
+	atomic64_set(&asid_generation, ASID_FIRST_VERSION);
+	asid_map = bitmap_zalloc(NUM_USER_ASIDS, GFP_KERNEL);
+	if (!asid_map)
+		panic("Failed to allocate bitmap for %lu ASIDs\n",
+		      NUM_USER_ASIDS);
+
+	pinned_asid_map = bitmap_zalloc(NUM_USER_ASIDS, GFP_KERNEL);
+	nr_pinned_asids = 0;
+
+	/*
+	 * We cannot call set_reserved_asid_bits() here because CPU
+	 * caps are not finalized yet, so it is safer to assume KPTI
+	 * and reserve kernel ASID's from beginning.
+	 */
+	if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0))
+		set_kpti_asid_bits(asid_map);
+	return 0;
+}
+early_initcall(asids_init);
diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c
new file mode 100644
index 000000000..a7bb20055
--- /dev/null
+++ b/arch/arm64/mm/copypage.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/copypage.c
+ *
+ * Copyright (C) 2002 Deep Blue Solutions Ltd, All Rights Reserved.
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <asm/cpufeature.h>
+#include <asm/mte.h>
+
+void copy_highpage(struct page *to, struct page *from)
+{
+	void *kto = page_address(to);
+	void *kfrom = page_address(from);
+
+	copy_page(kto, kfrom);
+
+	if (kasan_hw_tags_enabled())
+		page_kasan_tag_reset(to);
+
+	if (system_supports_mte() && page_mte_tagged(from)) {
+		/* It's a new page, shouldn't have been tagged yet */
+		WARN_ON_ONCE(!try_page_mte_tagging(to));
+		mte_copy_page_tags(kto, kfrom);
+		set_page_mte_tagged(to);
+	}
+}
+EXPORT_SYMBOL(copy_highpage);
+
+void copy_user_highpage(struct page *to, struct page *from,
+			unsigned long vaddr, struct vm_area_struct *vma)
+{
+	copy_highpage(to, from);
+	flush_dcache_page(to);
+}
+EXPORT_SYMBOL_GPL(copy_user_highpage);
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
new file mode 100644
index 000000000..3cb101e8c
--- /dev/null
+++ b/arch/arm64/mm/dma-mapping.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <linux/gfp.h>
+#include <linux/cache.h>
+#include <linux/dma-map-ops.h>
+#include <linux/iommu.h>
+#include <xen/xen.h>
+
+#include <asm/cacheflush.h>
+#include <asm/xen/xen-ops.h>
+
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+			      enum dma_data_direction dir)
+{
+	unsigned long start = (unsigned long)phys_to_virt(paddr);
+
+	dcache_clean_poc(start, start + size);
+}
+
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+			   enum dma_data_direction dir)
+{
+	unsigned long start = (unsigned long)phys_to_virt(paddr);
+
+	if (dir == DMA_TO_DEVICE)
+		return;
+
+	dcache_inval_poc(start, start + size);
+}
+
+void arch_dma_prep_coherent(struct page *page, size_t size)
+{
+	unsigned long start = (unsigned long)page_address(page);
+
+	dcache_clean_poc(start, start + size);
+}
+
+#ifdef CONFIG_IOMMU_DMA
+void arch_teardown_dma_ops(struct device *dev)
+{
+	dev->dma_ops = NULL;
+}
+#endif
+
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			const struct iommu_ops *iommu, bool coherent)
+{
+	int cls = cache_line_size_of_cpu();
+
+	WARN_TAINT(!coherent && cls > ARCH_DMA_MINALIGN,
+		   TAINT_CPU_OUT_OF_SPEC,
+		   "%s %s: ARCH_DMA_MINALIGN smaller than CTR_EL0.CWG (%d < %d)",
+		   dev_driver_string(dev), dev_name(dev),
+		   ARCH_DMA_MINALIGN, cls);
+
+	dev->dma_coherent = coherent;
+	if (iommu)
+		iommu_setup_dma_ops(dev, dma_base, dma_base + size - 1);
+
+	xen_setup_dma_ops(dev);
+}
diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c
new file mode 100644
index 000000000..228d681a8
--- /dev/null
+++ b/arch/arm64/mm/extable.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Based on arch/arm/mm/extable.c
+ */
+
+#include <linux/bitfield.h>
+#include <linux/extable.h>
+#include <linux/uaccess.h>
+
+#include <asm/asm-extable.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long
+get_ex_fixup(const struct exception_table_entry *ex)
+{
+	return ((unsigned long)&ex->fixup + ex->fixup);
+}
+
+static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex,
+					struct pt_regs *regs)
+{
+	int reg_err = FIELD_GET(EX_DATA_REG_ERR, ex->data);
+	int reg_zero = FIELD_GET(EX_DATA_REG_ZERO, ex->data);
+
+	pt_regs_write_reg(regs, reg_err, -EFAULT);
+	pt_regs_write_reg(regs, reg_zero, 0);
+
+	regs->pc = get_ex_fixup(ex);
+	return true;
+}
+
+static bool
+ex_handler_load_unaligned_zeropad(const struct exception_table_entry *ex,
+				  struct pt_regs *regs)
+{
+	int reg_data = FIELD_GET(EX_DATA_REG_DATA, ex->data);
+	int reg_addr = FIELD_GET(EX_DATA_REG_ADDR, ex->data);
+	unsigned long data, addr, offset;
+
+	addr = pt_regs_read_reg(regs, reg_addr);
+
+	offset = addr & 0x7UL;
+	addr &= ~0x7UL;
+
+	data = *(unsigned long*)addr;
+
+#ifndef __AARCH64EB__
+	data >>= 8 * offset;
+#else
+	data <<= 8 * offset;
+#endif
+
+	pt_regs_write_reg(regs, reg_data, data);
+
+	regs->pc = get_ex_fixup(ex);
+	return true;
+}
+
+bool fixup_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *ex;
+
+	ex = search_exception_tables(instruction_pointer(regs));
+	if (!ex)
+		return false;
+
+	switch (ex->type) {
+	case EX_TYPE_BPF:
+		return ex_handler_bpf(ex, regs);
+	case EX_TYPE_UACCESS_ERR_ZERO:
+	case EX_TYPE_KACCESS_ERR_ZERO:
+		return ex_handler_uaccess_err_zero(ex, regs);
+	case EX_TYPE_LOAD_UNALIGNED_ZEROPAD:
+		return ex_handler_load_unaligned_zeropad(ex, regs);
+	}
+
+	BUG();
+}
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
new file mode 100644
index 000000000..2e5d1e238
--- /dev/null
+++ b/arch/arm64/mm/fault.c
@@ -0,0 +1,962 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/fault.c
+ *
+ * Copyright (C) 1995  Linus Torvalds
+ * Copyright (C) 1995-2004 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/extable.h>
+#include <linux/kfence.h>
+#include <linux/signal.h>
+#include <linux/mm.h>
+#include <linux/hardirq.h>
+#include <linux/init.h>
+#include <linux/kasan.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/page-flags.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/debug.h>
+#include <linux/highmem.h>
+#include <linux/perf_event.h>
+#include <linux/preempt.h>
+#include <linux/hugetlb.h>
+
+#include <asm/acpi.h>
+#include <asm/bug.h>
+#include <asm/cmpxchg.h>
+#include <asm/cpufeature.h>
+#include <asm/efi.h>
+#include <asm/exception.h>
+#include <asm/daifflags.h>
+#include <asm/debug-monitors.h>
+#include <asm/esr.h>
+#include <asm/kprobes.h>
+#include <asm/mte.h>
+#include <asm/processor.h>
+#include <asm/sysreg.h>
+#include <asm/system_misc.h>
+#include <asm/tlbflush.h>
+#include <asm/traps.h>
+
+struct fault_info {
+	int	(*fn)(unsigned long far, unsigned long esr,
+		      struct pt_regs *regs);
+	int	sig;
+	int	code;
+	const char *name;
+};
+
+static const struct fault_info fault_info[];
+static struct fault_info debug_fault_info[];
+
+static inline const struct fault_info *esr_to_fault_info(unsigned long esr)
+{
+	return fault_info + (esr & ESR_ELx_FSC);
+}
+
+static inline const struct fault_info *esr_to_debug_fault_info(unsigned long esr)
+{
+	return debug_fault_info + DBG_ESR_EVT(esr);
+}
+
+static void data_abort_decode(unsigned long esr)
+{
+	unsigned long iss2 = ESR_ELx_ISS2(esr);
+
+	pr_alert("Data abort info:\n");
+
+	if (esr & ESR_ELx_ISV) {
+		pr_alert("  Access size = %u byte(s)\n",
+			 1U << ((esr & ESR_ELx_SAS) >> ESR_ELx_SAS_SHIFT));
+		pr_alert("  SSE = %lu, SRT = %lu\n",
+			 (esr & ESR_ELx_SSE) >> ESR_ELx_SSE_SHIFT,
+			 (esr & ESR_ELx_SRT_MASK) >> ESR_ELx_SRT_SHIFT);
+		pr_alert("  SF = %lu, AR = %lu\n",
+			 (esr & ESR_ELx_SF) >> ESR_ELx_SF_SHIFT,
+			 (esr & ESR_ELx_AR) >> ESR_ELx_AR_SHIFT);
+	} else {
+		pr_alert("  ISV = 0, ISS = 0x%08lx, ISS2 = 0x%08lx\n",
+			 esr & ESR_ELx_ISS_MASK, iss2);
+	}
+
+	pr_alert("  CM = %lu, WnR = %lu, TnD = %lu, TagAccess = %lu\n",
+		 (esr & ESR_ELx_CM) >> ESR_ELx_CM_SHIFT,
+		 (esr & ESR_ELx_WNR) >> ESR_ELx_WNR_SHIFT,
+		 (iss2 & ESR_ELx_TnD) >> ESR_ELx_TnD_SHIFT,
+		 (iss2 & ESR_ELx_TagAccess) >> ESR_ELx_TagAccess_SHIFT);
+
+	pr_alert("  GCS = %ld, Overlay = %lu, DirtyBit = %lu, Xs = %llu\n",
+		 (iss2 & ESR_ELx_GCS) >> ESR_ELx_GCS_SHIFT,
+		 (iss2 & ESR_ELx_Overlay) >> ESR_ELx_Overlay_SHIFT,
+		 (iss2 & ESR_ELx_DirtyBit) >> ESR_ELx_DirtyBit_SHIFT,
+		 (iss2 & ESR_ELx_Xs_MASK) >> ESR_ELx_Xs_SHIFT);
+}
+
+static void mem_abort_decode(unsigned long esr)
+{
+	pr_alert("Mem abort info:\n");
+
+	pr_alert("  ESR = 0x%016lx\n", esr);
+	pr_alert("  EC = 0x%02lx: %s, IL = %u bits\n",
+		 ESR_ELx_EC(esr), esr_get_class_string(esr),
+		 (esr & ESR_ELx_IL) ? 32 : 16);
+	pr_alert("  SET = %lu, FnV = %lu\n",
+		 (esr & ESR_ELx_SET_MASK) >> ESR_ELx_SET_SHIFT,
+		 (esr & ESR_ELx_FnV) >> ESR_ELx_FnV_SHIFT);
+	pr_alert("  EA = %lu, S1PTW = %lu\n",
+		 (esr & ESR_ELx_EA) >> ESR_ELx_EA_SHIFT,
+		 (esr & ESR_ELx_S1PTW) >> ESR_ELx_S1PTW_SHIFT);
+	pr_alert("  FSC = 0x%02lx: %s\n", (esr & ESR_ELx_FSC),
+		 esr_to_fault_info(esr)->name);
+
+	if (esr_is_data_abort(esr))
+		data_abort_decode(esr);
+}
+
+static inline unsigned long mm_to_pgd_phys(struct mm_struct *mm)
+{
+	/* Either init_pg_dir or swapper_pg_dir */
+	if (mm == &init_mm)
+		return __pa_symbol(mm->pgd);
+
+	return (unsigned long)virt_to_phys(mm->pgd);
+}
+
+/*
+ * Dump out the page tables associated with 'addr' in the currently active mm.
+ */
+static void show_pte(unsigned long addr)
+{
+	struct mm_struct *mm;
+	pgd_t *pgdp;
+	pgd_t pgd;
+
+	if (is_ttbr0_addr(addr)) {
+		/* TTBR0 */
+		mm = current->active_mm;
+		if (mm == &init_mm) {
+			pr_alert("[%016lx] user address but active_mm is swapper\n",
+				 addr);
+			return;
+		}
+	} else if (is_ttbr1_addr(addr)) {
+		/* TTBR1 */
+		mm = &init_mm;
+	} else {
+		pr_alert("[%016lx] address between user and kernel address ranges\n",
+			 addr);
+		return;
+	}
+
+	pr_alert("%s pgtable: %luk pages, %llu-bit VAs, pgdp=%016lx\n",
+		 mm == &init_mm ? "swapper" : "user", PAGE_SIZE / SZ_1K,
+		 vabits_actual, mm_to_pgd_phys(mm));
+	pgdp = pgd_offset(mm, addr);
+	pgd = READ_ONCE(*pgdp);
+	pr_alert("[%016lx] pgd=%016llx", addr, pgd_val(pgd));
+
+	do {
+		p4d_t *p4dp, p4d;
+		pud_t *pudp, pud;
+		pmd_t *pmdp, pmd;
+		pte_t *ptep, pte;
+
+		if (pgd_none(pgd) || pgd_bad(pgd))
+			break;
+
+		p4dp = p4d_offset(pgdp, addr);
+		p4d = READ_ONCE(*p4dp);
+		pr_cont(", p4d=%016llx", p4d_val(p4d));
+		if (p4d_none(p4d) || p4d_bad(p4d))
+			break;
+
+		pudp = pud_offset(p4dp, addr);
+		pud = READ_ONCE(*pudp);
+		pr_cont(", pud=%016llx", pud_val(pud));
+		if (pud_none(pud) || pud_bad(pud))
+			break;
+
+		pmdp = pmd_offset(pudp, addr);
+		pmd = READ_ONCE(*pmdp);
+		pr_cont(", pmd=%016llx", pmd_val(pmd));
+		if (pmd_none(pmd) || pmd_bad(pmd))
+			break;
+
+		ptep = pte_offset_map(pmdp, addr);
+		if (!ptep)
+			break;
+
+		pte = READ_ONCE(*ptep);
+		pr_cont(", pte=%016llx", pte_val(pte));
+		pte_unmap(ptep);
+	} while(0);
+
+	pr_cont("\n");
+}
+
+/*
+ * This function sets the access flags (dirty, accessed), as well as write
+ * permission, and only to a more permissive setting.
+ *
+ * It needs to cope with hardware update of the accessed/dirty state by other
+ * agents in the system and can safely skip the __sync_icache_dcache() call as,
+ * like set_pte_at(), the PTE is never changed from no-exec to exec here.
+ *
+ * Returns whether or not the PTE actually changed.
+ */
+int ptep_set_access_flags(struct vm_area_struct *vma,
+			  unsigned long address, pte_t *ptep,
+			  pte_t entry, int dirty)
+{
+	pteval_t old_pteval, pteval;
+	pte_t pte = READ_ONCE(*ptep);
+
+	if (pte_same(pte, entry))
+		return 0;
+
+	/* only preserve the access flags and write permission */
+	pte_val(entry) &= PTE_RDONLY | PTE_AF | PTE_WRITE | PTE_DIRTY;
+
+	/*
+	 * Setting the flags must be done atomically to avoid racing with the
+	 * hardware update of the access/dirty state. The PTE_RDONLY bit must
+	 * be set to the most permissive (lowest value) of *ptep and entry
+	 * (calculated as: a & b == ~(~a | ~b)).
+	 */
+	pte_val(entry) ^= PTE_RDONLY;
+	pteval = pte_val(pte);
+	do {
+		old_pteval = pteval;
+		pteval ^= PTE_RDONLY;
+		pteval |= pte_val(entry);
+		pteval ^= PTE_RDONLY;
+		pteval = cmpxchg_relaxed(&pte_val(*ptep), old_pteval, pteval);
+	} while (pteval != old_pteval);
+
+	/* Invalidate a stale read-only entry */
+	if (dirty)
+		flush_tlb_page(vma, address);
+	return 1;
+}
+
+static bool is_el1_instruction_abort(unsigned long esr)
+{
+	return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_CUR;
+}
+
+static bool is_el1_data_abort(unsigned long esr)
+{
+	return ESR_ELx_EC(esr) == ESR_ELx_EC_DABT_CUR;
+}
+
+static inline bool is_el1_permission_fault(unsigned long addr, unsigned long esr,
+					   struct pt_regs *regs)
+{
+	unsigned long fsc_type = esr & ESR_ELx_FSC_TYPE;
+
+	if (!is_el1_data_abort(esr) && !is_el1_instruction_abort(esr))
+		return false;
+
+	if (fsc_type == ESR_ELx_FSC_PERM)
+		return true;
+
+	if (is_ttbr0_addr(addr) && system_uses_ttbr0_pan())
+		return fsc_type == ESR_ELx_FSC_FAULT &&
+			(regs->pstate & PSR_PAN_BIT);
+
+	return false;
+}
+
+static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr,
+							unsigned long esr,
+							struct pt_regs *regs)
+{
+	unsigned long flags;
+	u64 par, dfsc;
+
+	if (!is_el1_data_abort(esr) ||
+	    (esr & ESR_ELx_FSC_TYPE) != ESR_ELx_FSC_FAULT)
+		return false;
+
+	local_irq_save(flags);
+	asm volatile("at s1e1r, %0" :: "r" (addr));
+	isb();
+	par = read_sysreg_par();
+	local_irq_restore(flags);
+
+	/*
+	 * If we now have a valid translation, treat the translation fault as
+	 * spurious.
+	 */
+	if (!(par & SYS_PAR_EL1_F))
+		return true;
+
+	/*
+	 * If we got a different type of fault from the AT instruction,
+	 * treat the translation fault as spurious.
+	 */
+	dfsc = FIELD_GET(SYS_PAR_EL1_FST, par);
+	return (dfsc & ESR_ELx_FSC_TYPE) != ESR_ELx_FSC_FAULT;
+}
+
+static void die_kernel_fault(const char *msg, unsigned long addr,
+			     unsigned long esr, struct pt_regs *regs)
+{
+	bust_spinlocks(1);
+
+	pr_alert("Unable to handle kernel %s at virtual address %016lx\n", msg,
+		 addr);
+
+	kasan_non_canonical_hook(addr);
+
+	mem_abort_decode(esr);
+
+	show_pte(addr);
+	die("Oops", regs, esr);
+	bust_spinlocks(0);
+	make_task_dead(SIGKILL);
+}
+
+#ifdef CONFIG_KASAN_HW_TAGS
+static void report_tag_fault(unsigned long addr, unsigned long esr,
+			     struct pt_regs *regs)
+{
+	/*
+	 * SAS bits aren't set for all faults reported in EL1, so we can't
+	 * find out access size.
+	 */
+	bool is_write = !!(esr & ESR_ELx_WNR);
+	kasan_report((void *)addr, 0, is_write, regs->pc);
+}
+#else
+/* Tag faults aren't enabled without CONFIG_KASAN_HW_TAGS. */
+static inline void report_tag_fault(unsigned long addr, unsigned long esr,
+				    struct pt_regs *regs) { }
+#endif
+
+static void do_tag_recovery(unsigned long addr, unsigned long esr,
+			   struct pt_regs *regs)
+{
+
+	report_tag_fault(addr, esr, regs);
+
+	/*
+	 * Disable MTE Tag Checking on the local CPU for the current EL.
+	 * It will be done lazily on the other CPUs when they will hit a
+	 * tag fault.
+	 */
+	sysreg_clear_set(sctlr_el1, SCTLR_EL1_TCF_MASK,
+			 SYS_FIELD_PREP_ENUM(SCTLR_EL1, TCF, NONE));
+	isb();
+}
+
+static bool is_el1_mte_sync_tag_check_fault(unsigned long esr)
+{
+	unsigned long fsc = esr & ESR_ELx_FSC;
+
+	if (!is_el1_data_abort(esr))
+		return false;
+
+	if (fsc == ESR_ELx_FSC_MTE)
+		return true;
+
+	return false;
+}
+
+static bool is_translation_fault(unsigned long esr)
+{
+	return (esr & ESR_ELx_FSC_TYPE) == ESR_ELx_FSC_FAULT;
+}
+
+static void __do_kernel_fault(unsigned long addr, unsigned long esr,
+			      struct pt_regs *regs)
+{
+	const char *msg;
+
+	/*
+	 * Are we prepared to handle this kernel fault?
+	 * We are almost certainly not prepared to handle instruction faults.
+	 */
+	if (!is_el1_instruction_abort(esr) && fixup_exception(regs))
+		return;
+
+	if (WARN_RATELIMIT(is_spurious_el1_translation_fault(addr, esr, regs),
+	    "Ignoring spurious kernel translation fault at virtual address %016lx\n", addr))
+		return;
+
+	if (is_el1_mte_sync_tag_check_fault(esr)) {
+		do_tag_recovery(addr, esr, regs);
+
+		return;
+	}
+
+	if (is_el1_permission_fault(addr, esr, regs)) {
+		if (esr & ESR_ELx_WNR)
+			msg = "write to read-only memory";
+		else if (is_el1_instruction_abort(esr))
+			msg = "execute from non-executable memory";
+		else
+			msg = "read from unreadable memory";
+	} else if (addr < PAGE_SIZE) {
+		msg = "NULL pointer dereference";
+	} else {
+		if (is_translation_fault(esr) &&
+		    kfence_handle_page_fault(addr, esr & ESR_ELx_WNR, regs))
+			return;
+
+		msg = "paging request";
+	}
+
+	if (efi_runtime_fixup_exception(regs, msg))
+		return;
+
+	die_kernel_fault(msg, addr, esr, regs);
+}
+
+static void set_thread_esr(unsigned long address, unsigned long esr)
+{
+	current->thread.fault_address = address;
+
+	/*
+	 * If the faulting address is in the kernel, we must sanitize the ESR.
+	 * From userspace's point of view, kernel-only mappings don't exist
+	 * at all, so we report them as level 0 translation faults.
+	 * (This is not quite the way that "no mapping there at all" behaves:
+	 * an alignment fault not caused by the memory type would take
+	 * precedence over translation fault for a real access to empty
+	 * space. Unfortunately we can't easily distinguish "alignment fault
+	 * not caused by memory type" from "alignment fault caused by memory
+	 * type", so we ignore this wrinkle and just return the translation
+	 * fault.)
+	 */
+	if (!is_ttbr0_addr(current->thread.fault_address)) {
+		switch (ESR_ELx_EC(esr)) {
+		case ESR_ELx_EC_DABT_LOW:
+			/*
+			 * These bits provide only information about the
+			 * faulting instruction, which userspace knows already.
+			 * We explicitly clear bits which are architecturally
+			 * RES0 in case they are given meanings in future.
+			 * We always report the ESR as if the fault was taken
+			 * to EL1 and so ISV and the bits in ISS[23:14] are
+			 * clear. (In fact it always will be a fault to EL1.)
+			 */
+			esr &= ESR_ELx_EC_MASK | ESR_ELx_IL |
+				ESR_ELx_CM | ESR_ELx_WNR;
+			esr |= ESR_ELx_FSC_FAULT;
+			break;
+		case ESR_ELx_EC_IABT_LOW:
+			/*
+			 * Claim a level 0 translation fault.
+			 * All other bits are architecturally RES0 for faults
+			 * reported with that DFSC value, so we clear them.
+			 */
+			esr &= ESR_ELx_EC_MASK | ESR_ELx_IL;
+			esr |= ESR_ELx_FSC_FAULT;
+			break;
+		default:
+			/*
+			 * This should never happen (entry.S only brings us
+			 * into this code for insn and data aborts from a lower
+			 * exception level). Fail safe by not providing an ESR
+			 * context record at all.
+			 */
+			WARN(1, "ESR 0x%lx is not DABT or IABT from EL0\n", esr);
+			esr = 0;
+			break;
+		}
+	}
+
+	current->thread.fault_code = esr;
+}
+
+static void do_bad_area(unsigned long far, unsigned long esr,
+			struct pt_regs *regs)
+{
+	unsigned long addr = untagged_addr(far);
+
+	/*
+	 * If we are in kernel mode at this point, we have no context to
+	 * handle this fault with.
+	 */
+	if (user_mode(regs)) {
+		const struct fault_info *inf = esr_to_fault_info(esr);
+
+		set_thread_esr(addr, esr);
+		arm64_force_sig_fault(inf->sig, inf->code, far, inf->name);
+	} else {
+		__do_kernel_fault(addr, esr, regs);
+	}
+}
+
+#define VM_FAULT_BADMAP		((__force vm_fault_t)0x010000)
+#define VM_FAULT_BADACCESS	((__force vm_fault_t)0x020000)
+
+static vm_fault_t __do_page_fault(struct mm_struct *mm,
+				  struct vm_area_struct *vma, unsigned long addr,
+				  unsigned int mm_flags, unsigned long vm_flags,
+				  struct pt_regs *regs)
+{
+	/*
+	 * Ok, we have a good vm_area for this memory access, so we can handle
+	 * it.
+	 * Check that the permissions on the VMA allow for the fault which
+	 * occurred.
+	 */
+	if (!(vma->vm_flags & vm_flags))
+		return VM_FAULT_BADACCESS;
+	return handle_mm_fault(vma, addr, mm_flags, regs);
+}
+
+static bool is_el0_instruction_abort(unsigned long esr)
+{
+	return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_LOW;
+}
+
+/*
+ * Note: not valid for EL1 DC IVAC, but we never use that such that it
+ * should fault. EL0 cannot issue DC IVAC (undef).
+ */
+static bool is_write_abort(unsigned long esr)
+{
+	return (esr & ESR_ELx_WNR) && !(esr & ESR_ELx_CM);
+}
+
+static int __kprobes do_page_fault(unsigned long far, unsigned long esr,
+				   struct pt_regs *regs)
+{
+	const struct fault_info *inf;
+	struct mm_struct *mm = current->mm;
+	vm_fault_t fault;
+	unsigned long vm_flags;
+	unsigned int mm_flags = FAULT_FLAG_DEFAULT;
+	unsigned long addr = untagged_addr(far);
+	struct vm_area_struct *vma;
+
+	if (kprobe_page_fault(regs, esr))
+		return 0;
+
+	/*
+	 * If we're in an interrupt or have no user context, we must not take
+	 * the fault.
+	 */
+	if (faulthandler_disabled() || !mm)
+		goto no_context;
+
+	if (user_mode(regs))
+		mm_flags |= FAULT_FLAG_USER;
+
+	/*
+	 * vm_flags tells us what bits we must have in vma->vm_flags
+	 * for the fault to be benign, __do_page_fault() would check
+	 * vma->vm_flags & vm_flags and returns an error if the
+	 * intersection is empty
+	 */
+	if (is_el0_instruction_abort(esr)) {
+		/* It was exec fault */
+		vm_flags = VM_EXEC;
+		mm_flags |= FAULT_FLAG_INSTRUCTION;
+	} else if (is_write_abort(esr)) {
+		/* It was write fault */
+		vm_flags = VM_WRITE;
+		mm_flags |= FAULT_FLAG_WRITE;
+	} else {
+		/* It was read fault */
+		vm_flags = VM_READ;
+		/* Write implies read */
+		vm_flags |= VM_WRITE;
+		/* If EPAN is absent then exec implies read */
+		if (!cpus_have_const_cap(ARM64_HAS_EPAN))
+			vm_flags |= VM_EXEC;
+	}
+
+	if (is_ttbr0_addr(addr) && is_el1_permission_fault(addr, esr, regs)) {
+		if (is_el1_instruction_abort(esr))
+			die_kernel_fault("execution of user memory",
+					 addr, esr, regs);
+
+		if (!search_exception_tables(regs->pc))
+			die_kernel_fault("access to user memory outside uaccess routines",
+					 addr, esr, regs);
+	}
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
+
+	if (!(mm_flags & FAULT_FLAG_USER))
+		goto lock_mmap;
+
+	vma = lock_vma_under_rcu(mm, addr);
+	if (!vma)
+		goto lock_mmap;
+
+	if (!(vma->vm_flags & vm_flags)) {
+		vma_end_read(vma);
+		goto lock_mmap;
+	}
+	fault = handle_mm_fault(vma, addr, mm_flags | FAULT_FLAG_VMA_LOCK, regs);
+	if (!(fault & (VM_FAULT_RETRY | VM_FAULT_COMPLETED)))
+		vma_end_read(vma);
+
+	if (!(fault & VM_FAULT_RETRY)) {
+		count_vm_vma_lock_event(VMA_LOCK_SUCCESS);
+		goto done;
+	}
+	count_vm_vma_lock_event(VMA_LOCK_RETRY);
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return 0;
+	}
+lock_mmap:
+
+retry:
+	vma = lock_mm_and_find_vma(mm, addr, regs);
+	if (unlikely(!vma)) {
+		fault = VM_FAULT_BADMAP;
+		goto done;
+	}
+
+	fault = __do_page_fault(mm, vma, addr, mm_flags, vm_flags, regs);
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return 0;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return 0;
+
+	if (fault & VM_FAULT_RETRY) {
+		mm_flags |= FAULT_FLAG_TRIED;
+		goto retry;
+	}
+	mmap_read_unlock(mm);
+
+done:
+	/*
+	 * Handle the "normal" (no error) case first.
+	 */
+	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP |
+			      VM_FAULT_BADACCESS))))
+		return 0;
+
+	/*
+	 * If we are in kernel mode at this point, we have no context to
+	 * handle this fault with.
+	 */
+	if (!user_mode(regs))
+		goto no_context;
+
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we got
+		 * oom-killed).
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
+	inf = esr_to_fault_info(esr);
+	set_thread_esr(addr, esr);
+	if (fault & VM_FAULT_SIGBUS) {
+		/*
+		 * We had some memory, but were unable to successfully fix up
+		 * this page fault.
+		 */
+		arm64_force_sig_fault(SIGBUS, BUS_ADRERR, far, inf->name);
+	} else if (fault & (VM_FAULT_HWPOISON_LARGE | VM_FAULT_HWPOISON)) {
+		unsigned int lsb;
+
+		lsb = PAGE_SHIFT;
+		if (fault & VM_FAULT_HWPOISON_LARGE)
+			lsb = hstate_index_to_shift(VM_FAULT_GET_HINDEX(fault));
+
+		arm64_force_sig_mceerr(BUS_MCEERR_AR, far, lsb, inf->name);
+	} else {
+		/*
+		 * Something tried to access memory that isn't in our memory
+		 * map.
+		 */
+		arm64_force_sig_fault(SIGSEGV,
+				      fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR,
+				      far, inf->name);
+	}
+
+	return 0;
+
+no_context:
+	__do_kernel_fault(addr, esr, regs);
+	return 0;
+}
+
+static int __kprobes do_translation_fault(unsigned long far,
+					  unsigned long esr,
+					  struct pt_regs *regs)
+{
+	unsigned long addr = untagged_addr(far);
+
+	if (is_ttbr0_addr(addr))
+		return do_page_fault(far, esr, regs);
+
+	do_bad_area(far, esr, regs);
+	return 0;
+}
+
+static int do_alignment_fault(unsigned long far, unsigned long esr,
+			      struct pt_regs *regs)
+{
+	if (IS_ENABLED(CONFIG_COMPAT_ALIGNMENT_FIXUPS) &&
+	    compat_user_mode(regs))
+		return do_compat_alignment_fixup(far, regs);
+	do_bad_area(far, esr, regs);
+	return 0;
+}
+
+static int do_bad(unsigned long far, unsigned long esr, struct pt_regs *regs)
+{
+	return 1; /* "fault" */
+}
+
+static int do_sea(unsigned long far, unsigned long esr, struct pt_regs *regs)
+{
+	const struct fault_info *inf;
+	unsigned long siaddr;
+
+	inf = esr_to_fault_info(esr);
+
+	if (user_mode(regs) && apei_claim_sea(regs) == 0) {
+		/*
+		 * APEI claimed this as a firmware-first notification.
+		 * Some processing deferred to task_work before ret_to_user().
+		 */
+		return 0;
+	}
+
+	if (esr & ESR_ELx_FnV) {
+		siaddr = 0;
+	} else {
+		/*
+		 * The architecture specifies that the tag bits of FAR_EL1 are
+		 * UNKNOWN for synchronous external aborts. Mask them out now
+		 * so that userspace doesn't see them.
+		 */
+		siaddr  = untagged_addr(far);
+	}
+	arm64_notify_die(inf->name, regs, inf->sig, inf->code, siaddr, esr);
+
+	return 0;
+}
+
+static int do_tag_check_fault(unsigned long far, unsigned long esr,
+			      struct pt_regs *regs)
+{
+	/*
+	 * The architecture specifies that bits 63:60 of FAR_EL1 are UNKNOWN
+	 * for tag check faults. Set them to corresponding bits in the untagged
+	 * address.
+	 */
+	far = (__untagged_addr(far) & ~MTE_TAG_MASK) | (far & MTE_TAG_MASK);
+	do_bad_area(far, esr, regs);
+	return 0;
+}
+
+static const struct fault_info fault_info[] = {
+	{ do_bad,		SIGKILL, SI_KERNEL,	"ttbr address size fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"level 1 address size fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"level 2 address size fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"level 3 address size fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 0 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 8"			},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 access flag fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 12"			},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 permission fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 permission fault"	},
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 permission fault"	},
+	{ do_sea,		SIGBUS,  BUS_OBJERR,	"synchronous external abort"	},
+	{ do_tag_check_fault,	SIGSEGV, SEGV_MTESERR,	"synchronous tag check fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 18"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 19"			},
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 0 (translation table walk)"	},
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 1 (translation table walk)"	},
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 2 (translation table walk)"	},
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 3 (translation table walk)"	},
+	{ do_sea,		SIGBUS,  BUS_OBJERR,	"synchronous parity or ECC error" },	// Reserved when RAS is implemented
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 25"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 26"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 27"			},
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 0 synchronous parity error (translation table walk)"	},	// Reserved when RAS is implemented
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 1 synchronous parity error (translation table walk)"	},	// Reserved when RAS is implemented
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 2 synchronous parity error (translation table walk)"	},	// Reserved when RAS is implemented
+	{ do_sea,		SIGKILL, SI_KERNEL,	"level 3 synchronous parity error (translation table walk)"	},	// Reserved when RAS is implemented
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 32"			},
+	{ do_alignment_fault,	SIGBUS,  BUS_ADRALN,	"alignment fault"		},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 34"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 35"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 36"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 37"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 38"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 39"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 40"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 41"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 42"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 43"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 44"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 45"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 46"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 47"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"TLB conflict abort"		},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"Unsupported atomic hardware update fault"	},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 50"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 51"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"implementation fault (lockdown abort)" },
+	{ do_bad,		SIGBUS,  BUS_OBJERR,	"implementation fault (unsupported exclusive)" },
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 54"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 55"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 56"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 57"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 58" 			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 59"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 60"			},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"section domain fault"		},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"page domain fault"		},
+	{ do_bad,		SIGKILL, SI_KERNEL,	"unknown 63"			},
+};
+
+void do_mem_abort(unsigned long far, unsigned long esr, struct pt_regs *regs)
+{
+	const struct fault_info *inf = esr_to_fault_info(esr);
+	unsigned long addr = untagged_addr(far);
+
+	if (!inf->fn(far, esr, regs))
+		return;
+
+	if (!user_mode(regs))
+		die_kernel_fault(inf->name, addr, esr, regs);
+
+	/*
+	 * At this point we have an unrecognized fault type whose tag bits may
+	 * have been defined as UNKNOWN. Therefore we only expose the untagged
+	 * address to the signal handler.
+	 */
+	arm64_notify_die(inf->name, regs, inf->sig, inf->code, addr, esr);
+}
+NOKPROBE_SYMBOL(do_mem_abort);
+
+void do_sp_pc_abort(unsigned long addr, unsigned long esr, struct pt_regs *regs)
+{
+	arm64_notify_die("SP/PC alignment exception", regs, SIGBUS, BUS_ADRALN,
+			 addr, esr);
+}
+NOKPROBE_SYMBOL(do_sp_pc_abort);
+
+/*
+ * __refdata because early_brk64 is __init, but the reference to it is
+ * clobbered at arch_initcall time.
+ * See traps.c and debug-monitors.c:debug_traps_init().
+ */
+static struct fault_info __refdata debug_fault_info[] = {
+	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware breakpoint"	},
+	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware single-step"	},
+	{ do_bad,	SIGTRAP,	TRAP_HWBKPT,	"hardware watchpoint"	},
+	{ do_bad,	SIGKILL,	SI_KERNEL,	"unknown 3"		},
+	{ do_bad,	SIGTRAP,	TRAP_BRKPT,	"aarch32 BKPT"		},
+	{ do_bad,	SIGKILL,	SI_KERNEL,	"aarch32 vector catch"	},
+	{ early_brk64,	SIGTRAP,	TRAP_BRKPT,	"aarch64 BRK"		},
+	{ do_bad,	SIGKILL,	SI_KERNEL,	"unknown 7"		},
+};
+
+void __init hook_debug_fault_code(int nr,
+				  int (*fn)(unsigned long, unsigned long, struct pt_regs *),
+				  int sig, int code, const char *name)
+{
+	BUG_ON(nr < 0 || nr >= ARRAY_SIZE(debug_fault_info));
+
+	debug_fault_info[nr].fn		= fn;
+	debug_fault_info[nr].sig	= sig;
+	debug_fault_info[nr].code	= code;
+	debug_fault_info[nr].name	= name;
+}
+
+/*
+ * In debug exception context, we explicitly disable preemption despite
+ * having interrupts disabled.
+ * This serves two purposes: it makes it much less likely that we would
+ * accidentally schedule in exception context and it will force a warning
+ * if we somehow manage to schedule by accident.
+ */
+static void debug_exception_enter(struct pt_regs *regs)
+{
+	preempt_disable();
+
+	/* This code is a bit fragile.  Test it. */
+	RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work");
+}
+NOKPROBE_SYMBOL(debug_exception_enter);
+
+static void debug_exception_exit(struct pt_regs *regs)
+{
+	preempt_enable_no_resched();
+}
+NOKPROBE_SYMBOL(debug_exception_exit);
+
+void do_debug_exception(unsigned long addr_if_watchpoint, unsigned long esr,
+			struct pt_regs *regs)
+{
+	const struct fault_info *inf = esr_to_debug_fault_info(esr);
+	unsigned long pc = instruction_pointer(regs);
+
+	debug_exception_enter(regs);
+
+	if (user_mode(regs) && !is_ttbr0_addr(pc))
+		arm64_apply_bp_hardening();
+
+	if (inf->fn(addr_if_watchpoint, esr, regs)) {
+		arm64_notify_die(inf->name, regs, inf->sig, inf->code, pc, esr);
+	}
+
+	debug_exception_exit(regs);
+}
+NOKPROBE_SYMBOL(do_debug_exception);
+
+/*
+ * Used during anonymous page fault handling.
+ */
+struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma,
+						unsigned long vaddr)
+{
+	gfp_t flags = GFP_HIGHUSER_MOVABLE | __GFP_ZERO;
+
+	/*
+	 * If the page is mapped with PROT_MTE, initialise the tags at the
+	 * point of allocation and page zeroing as this is usually faster than
+	 * separate DC ZVA and STGM.
+	 */
+	if (vma->vm_flags & VM_MTE)
+		flags |= __GFP_ZEROTAGS;
+
+	return vma_alloc_folio(flags, 0, vma, vaddr, false);
+}
+
+void tag_clear_highpage(struct page *page)
+{
+	/* Newly allocated page, shouldn't have been tagged yet */
+	WARN_ON_ONCE(!try_page_mte_tagging(page));
+	mte_zero_clear_page_tags(page_address(page));
+	set_page_mte_tagged(page);
+}
diff --git a/arch/arm64/mm/fixmap.c b/arch/arm64/mm/fixmap.c
new file mode 100644
index 000000000..c0a330120
--- /dev/null
+++ b/arch/arm64/mm/fixmap.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Fixmap manipulation code
+ */
+
+#include <linux/bug.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/memory.h>
+#include <linux/mm.h>
+#include <linux/sizes.h>
+
+#include <asm/fixmap.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+#define NR_BM_PTE_TABLES \
+	SPAN_NR_ENTRIES(FIXADDR_TOT_START, FIXADDR_TOP, PMD_SHIFT)
+#define NR_BM_PMD_TABLES \
+	SPAN_NR_ENTRIES(FIXADDR_TOT_START, FIXADDR_TOP, PUD_SHIFT)
+
+static_assert(NR_BM_PMD_TABLES == 1);
+
+#define __BM_TABLE_IDX(addr, shift) \
+	(((addr) >> (shift)) - (FIXADDR_TOT_START >> (shift)))
+
+#define BM_PTE_TABLE_IDX(addr)	__BM_TABLE_IDX(addr, PMD_SHIFT)
+
+static pte_t bm_pte[NR_BM_PTE_TABLES][PTRS_PER_PTE] __page_aligned_bss;
+static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
+static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
+
+static inline pte_t *fixmap_pte(unsigned long addr)
+{
+	return &bm_pte[BM_PTE_TABLE_IDX(addr)][pte_index(addr)];
+}
+
+static void __init early_fixmap_init_pte(pmd_t *pmdp, unsigned long addr)
+{
+	pmd_t pmd = READ_ONCE(*pmdp);
+	pte_t *ptep;
+
+	if (pmd_none(pmd)) {
+		ptep = bm_pte[BM_PTE_TABLE_IDX(addr)];
+		__pmd_populate(pmdp, __pa_symbol(ptep), PMD_TYPE_TABLE);
+	}
+}
+
+static void __init early_fixmap_init_pmd(pud_t *pudp, unsigned long addr,
+					 unsigned long end)
+{
+	unsigned long next;
+	pud_t pud = READ_ONCE(*pudp);
+	pmd_t *pmdp;
+
+	if (pud_none(pud))
+		__pud_populate(pudp, __pa_symbol(bm_pmd), PUD_TYPE_TABLE);
+
+	pmdp = pmd_offset_kimg(pudp, addr);
+	do {
+		next = pmd_addr_end(addr, end);
+		early_fixmap_init_pte(pmdp, addr);
+	} while (pmdp++, addr = next, addr != end);
+}
+
+
+static void __init early_fixmap_init_pud(p4d_t *p4dp, unsigned long addr,
+					 unsigned long end)
+{
+	p4d_t p4d = READ_ONCE(*p4dp);
+	pud_t *pudp;
+
+	if (CONFIG_PGTABLE_LEVELS > 3 && !p4d_none(p4d) &&
+	    p4d_page_paddr(p4d) != __pa_symbol(bm_pud)) {
+		/*
+		 * We only end up here if the kernel mapping and the fixmap
+		 * share the top level pgd entry, which should only happen on
+		 * 16k/4 levels configurations.
+		 */
+		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
+	}
+
+	if (p4d_none(p4d))
+		__p4d_populate(p4dp, __pa_symbol(bm_pud), P4D_TYPE_TABLE);
+
+	pudp = pud_offset_kimg(p4dp, addr);
+	early_fixmap_init_pmd(pudp, addr, end);
+}
+
+/*
+ * The p*d_populate functions call virt_to_phys implicitly so they can't be used
+ * directly on kernel symbols (bm_p*d). This function is called too early to use
+ * lm_alias so __p*d_populate functions must be used to populate with the
+ * physical address from __pa_symbol.
+ */
+void __init early_fixmap_init(void)
+{
+	unsigned long addr = FIXADDR_TOT_START;
+	unsigned long end = FIXADDR_TOP;
+
+	pgd_t *pgdp = pgd_offset_k(addr);
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+
+	early_fixmap_init_pud(p4dp, addr, end);
+}
+
+/*
+ * Unusually, this is also called in IRQ context (ghes_iounmap_irq) so if we
+ * ever need to use IPIs for TLB broadcasting, then we're in trouble here.
+ */
+void __set_fixmap(enum fixed_addresses idx,
+			       phys_addr_t phys, pgprot_t flags)
+{
+	unsigned long addr = __fix_to_virt(idx);
+	pte_t *ptep;
+
+	BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
+
+	ptep = fixmap_pte(addr);
+
+	if (pgprot_val(flags)) {
+		set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, flags));
+	} else {
+		pte_clear(&init_mm, addr, ptep);
+		flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
+	}
+}
+
+void *__init fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot)
+{
+	const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
+	phys_addr_t dt_phys_base;
+	int offset;
+	void *dt_virt;
+
+	/*
+	 * Check whether the physical FDT address is set and meets the minimum
+	 * alignment requirement. Since we are relying on MIN_FDT_ALIGN to be
+	 * at least 8 bytes so that we can always access the magic and size
+	 * fields of the FDT header after mapping the first chunk, double check
+	 * here if that is indeed the case.
+	 */
+	BUILD_BUG_ON(MIN_FDT_ALIGN < 8);
+	if (!dt_phys || dt_phys % MIN_FDT_ALIGN)
+		return NULL;
+
+	dt_phys_base = round_down(dt_phys, PAGE_SIZE);
+	offset = dt_phys % PAGE_SIZE;
+	dt_virt = (void *)dt_virt_base + offset;
+
+	/* map the first chunk so we can read the size from the header */
+	create_mapping_noalloc(dt_phys_base, dt_virt_base, PAGE_SIZE, prot);
+
+	if (fdt_magic(dt_virt) != FDT_MAGIC)
+		return NULL;
+
+	*size = fdt_totalsize(dt_virt);
+	if (*size > MAX_FDT_SIZE)
+		return NULL;
+
+	if (offset + *size > PAGE_SIZE) {
+		create_mapping_noalloc(dt_phys_base, dt_virt_base,
+				       offset + *size, prot);
+	}
+
+	return dt_virt;
+}
+
+/*
+ * Copy the fixmap region into a new pgdir.
+ */
+void __init fixmap_copy(pgd_t *pgdir)
+{
+	if (!READ_ONCE(pgd_val(*pgd_offset_pgd(pgdir, FIXADDR_TOT_START)))) {
+		/*
+		 * The fixmap falls in a separate pgd to the kernel, and doesn't
+		 * live in the carveout for the swapper_pg_dir. We can simply
+		 * re-use the existing dir for the fixmap.
+		 */
+		set_pgd(pgd_offset_pgd(pgdir, FIXADDR_TOT_START),
+			READ_ONCE(*pgd_offset_k(FIXADDR_TOT_START)));
+	} else if (CONFIG_PGTABLE_LEVELS > 3) {
+		pgd_t *bm_pgdp;
+		p4d_t *bm_p4dp;
+		pud_t *bm_pudp;
+		/*
+		 * The fixmap shares its top level pgd entry with the kernel
+		 * mapping. This can really only occur when we are running
+		 * with 16k/4 levels, so we can simply reuse the pud level
+		 * entry instead.
+		 */
+		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
+		bm_pgdp = pgd_offset_pgd(pgdir, FIXADDR_TOT_START);
+		bm_p4dp = p4d_offset(bm_pgdp, FIXADDR_TOT_START);
+		bm_pudp = pud_set_fixmap_offset(bm_p4dp, FIXADDR_TOT_START);
+		pud_populate(&init_mm, bm_pudp, lm_alias(bm_pmd));
+		pud_clear_fixmap();
+	} else {
+		BUG();
+	}
+}
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
new file mode 100644
index 000000000..013eead9b
--- /dev/null
+++ b/arch/arm64/mm/flush.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/flush.c
+ *
+ * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/libnvdimm.h>
+#include <linux/pagemap.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cache.h>
+#include <asm/tlbflush.h>
+
+void sync_icache_aliases(unsigned long start, unsigned long end)
+{
+	if (icache_is_aliasing()) {
+		dcache_clean_pou(start, end);
+		icache_inval_all_pou();
+	} else {
+		/*
+		 * Don't issue kick_all_cpus_sync() after I-cache invalidation
+		 * for user mappings.
+		 */
+		caches_clean_inval_pou(start, end);
+	}
+}
+
+static void flush_ptrace_access(struct vm_area_struct *vma, unsigned long start,
+				unsigned long end)
+{
+	if (vma->vm_flags & VM_EXEC)
+		sync_icache_aliases(start, end);
+}
+
+/*
+ * Copy user data from/to a page which is mapped into a different processes
+ * address space.  Really, we want to allow our "user space" model to handle
+ * this.
+ */
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		       unsigned long uaddr, void *dst, const void *src,
+		       unsigned long len)
+{
+	memcpy(dst, src, len);
+	flush_ptrace_access(vma, (unsigned long)dst, (unsigned long)dst + len);
+}
+
+void __sync_icache_dcache(pte_t pte)
+{
+	struct folio *folio = page_folio(pte_page(pte));
+
+	if (!test_bit(PG_dcache_clean, &folio->flags)) {
+		sync_icache_aliases((unsigned long)folio_address(folio),
+				    (unsigned long)folio_address(folio) +
+					    folio_size(folio));
+		set_bit(PG_dcache_clean, &folio->flags);
+	}
+}
+EXPORT_SYMBOL_GPL(__sync_icache_dcache);
+
+/*
+ * This function is called when a page has been modified by the kernel. Mark
+ * it as dirty for later flushing when mapped in user space (if executable,
+ * see __sync_icache_dcache).
+ */
+void flush_dcache_folio(struct folio *folio)
+{
+	if (test_bit(PG_dcache_clean, &folio->flags))
+		clear_bit(PG_dcache_clean, &folio->flags);
+}
+EXPORT_SYMBOL(flush_dcache_folio);
+
+void flush_dcache_page(struct page *page)
+{
+	flush_dcache_folio(page_folio(page));
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+/*
+ * Additional functions defined in assembly.
+ */
+EXPORT_SYMBOL(caches_clean_inval_pou);
+
+#ifdef CONFIG_ARCH_HAS_PMEM_API
+void arch_wb_cache_pmem(void *addr, size_t size)
+{
+	/* Ensure order against any prior non-cacheable writes */
+	dmb(osh);
+	dcache_clean_pop((unsigned long)addr, (unsigned long)addr + size);
+}
+EXPORT_SYMBOL_GPL(arch_wb_cache_pmem);
+
+void arch_invalidate_pmem(void *addr, size_t size)
+{
+	dcache_inval_poc((unsigned long)addr, (unsigned long)addr + size);
+}
+EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
+#endif
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
new file mode 100644
index 000000000..13fd59222
--- /dev/null
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm64/mm/hugetlbpage.c
+ *
+ * Copyright (C) 2013 Linaro Ltd.
+ *
+ * Based on arch/x86/mm/hugetlbpage.c.
+ */
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/err.h>
+#include <linux/sysctl.h>
+#include <asm/mman.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+/*
+ * HugeTLB Support Matrix
+ *
+ * ---------------------------------------------------
+ * | Page Size | CONT PTE |  PMD  | CONT PMD |  PUD  |
+ * ---------------------------------------------------
+ * |     4K    |   64K    |   2M  |    32M   |   1G  |
+ * |    16K    |    2M    |  32M  |     1G   |       |
+ * |    64K    |    2M    | 512M  |    16G   |       |
+ * ---------------------------------------------------
+ */
+
+/*
+ * Reserve CMA areas for the largest supported gigantic
+ * huge page when requested. Any other smaller gigantic
+ * huge pages could still be served from those areas.
+ */
+#ifdef CONFIG_CMA
+void __init arm64_hugetlb_cma_reserve(void)
+{
+	int order;
+
+	if (pud_sect_supported())
+		order = PUD_SHIFT - PAGE_SHIFT;
+	else
+		order = CONT_PMD_SHIFT - PAGE_SHIFT;
+
+	/*
+	 * HugeTLB CMA reservation is required for gigantic
+	 * huge pages which could not be allocated via the
+	 * page allocator. Just warn if there is any change
+	 * breaking this assumption.
+	 */
+	WARN_ON(order <= MAX_ORDER);
+	hugetlb_cma_reserve(order);
+}
+#endif /* CONFIG_CMA */
+
+static bool __hugetlb_valid_size(unsigned long size)
+{
+	switch (size) {
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		return pud_sect_supported();
+#endif
+	case CONT_PMD_SIZE:
+	case PMD_SIZE:
+	case CONT_PTE_SIZE:
+		return true;
+	}
+
+	return false;
+}
+
+#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
+bool arch_hugetlb_migration_supported(struct hstate *h)
+{
+	size_t pagesize = huge_page_size(h);
+
+	if (!__hugetlb_valid_size(pagesize)) {
+		pr_warn("%s: unrecognized huge page size 0x%lx\n",
+			__func__, pagesize);
+		return false;
+	}
+	return true;
+}
+#endif
+
+int pmd_huge(pmd_t pmd)
+{
+	return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT);
+}
+
+int pud_huge(pud_t pud)
+{
+#ifndef __PAGETABLE_PMD_FOLDED
+	return pud_val(pud) && !(pud_val(pud) & PUD_TABLE_BIT);
+#else
+	return 0;
+#endif
+}
+
+static int find_num_contig(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, size_t *pgsize)
+{
+	pgd_t *pgdp = pgd_offset(mm, addr);
+	p4d_t *p4dp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+
+	*pgsize = PAGE_SIZE;
+	p4dp = p4d_offset(pgdp, addr);
+	pudp = pud_offset(p4dp, addr);
+	pmdp = pmd_offset(pudp, addr);
+	if ((pte_t *)pmdp == ptep) {
+		*pgsize = PMD_SIZE;
+		return CONT_PMDS;
+	}
+	return CONT_PTES;
+}
+
+static inline int num_contig_ptes(unsigned long size, size_t *pgsize)
+{
+	int contig_ptes = 0;
+
+	*pgsize = size;
+
+	switch (size) {
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		if (pud_sect_supported())
+			contig_ptes = 1;
+		break;
+#endif
+	case PMD_SIZE:
+		contig_ptes = 1;
+		break;
+	case CONT_PMD_SIZE:
+		*pgsize = PMD_SIZE;
+		contig_ptes = CONT_PMDS;
+		break;
+	case CONT_PTE_SIZE:
+		*pgsize = PAGE_SIZE;
+		contig_ptes = CONT_PTES;
+		break;
+	}
+
+	return contig_ptes;
+}
+
+pte_t huge_ptep_get(pte_t *ptep)
+{
+	int ncontig, i;
+	size_t pgsize;
+	pte_t orig_pte = ptep_get(ptep);
+
+	if (!pte_present(orig_pte) || !pte_cont(orig_pte))
+		return orig_pte;
+
+	ncontig = num_contig_ptes(page_size(pte_page(orig_pte)), &pgsize);
+	for (i = 0; i < ncontig; i++, ptep++) {
+		pte_t pte = ptep_get(ptep);
+
+		if (pte_dirty(pte))
+			orig_pte = pte_mkdirty(orig_pte);
+
+		if (pte_young(pte))
+			orig_pte = pte_mkyoung(orig_pte);
+	}
+	return orig_pte;
+}
+
+/*
+ * Changing some bits of contiguous entries requires us to follow a
+ * Break-Before-Make approach, breaking the whole contiguous set
+ * before we can change any entries. See ARM DDI 0487A.k_iss10775,
+ * "Misprogramming of the Contiguous bit", page D4-1762.
+ *
+ * This helper performs the break step.
+ */
+static pte_t get_clear_contig(struct mm_struct *mm,
+			     unsigned long addr,
+			     pte_t *ptep,
+			     unsigned long pgsize,
+			     unsigned long ncontig)
+{
+	pte_t orig_pte = ptep_get(ptep);
+	unsigned long i;
+
+	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) {
+		pte_t pte = ptep_get_and_clear(mm, addr, ptep);
+
+		/*
+		 * If HW_AFDBM is enabled, then the HW could turn on
+		 * the dirty or accessed bit for any page in the set,
+		 * so check them all.
+		 */
+		if (pte_dirty(pte))
+			orig_pte = pte_mkdirty(orig_pte);
+
+		if (pte_young(pte))
+			orig_pte = pte_mkyoung(orig_pte);
+	}
+	return orig_pte;
+}
+
+static pte_t get_clear_contig_flush(struct mm_struct *mm,
+				    unsigned long addr,
+				    pte_t *ptep,
+				    unsigned long pgsize,
+				    unsigned long ncontig)
+{
+	pte_t orig_pte = get_clear_contig(mm, addr, ptep, pgsize, ncontig);
+	struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
+
+	flush_tlb_range(&vma, addr, addr + (pgsize * ncontig));
+	return orig_pte;
+}
+
+/*
+ * Changing some bits of contiguous entries requires us to follow a
+ * Break-Before-Make approach, breaking the whole contiguous set
+ * before we can change any entries. See ARM DDI 0487A.k_iss10775,
+ * "Misprogramming of the Contiguous bit", page D4-1762.
+ *
+ * This helper performs the break step for use cases where the
+ * original pte is not needed.
+ */
+static void clear_flush(struct mm_struct *mm,
+			     unsigned long addr,
+			     pte_t *ptep,
+			     unsigned long pgsize,
+			     unsigned long ncontig)
+{
+	struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
+	unsigned long i, saddr = addr;
+
+	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
+		ptep_clear(mm, addr, ptep);
+
+	flush_tlb_range(&vma, saddr, addr);
+}
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, pte_t pte, unsigned long sz)
+{
+	size_t pgsize;
+	int i;
+	int ncontig;
+	unsigned long pfn, dpfn;
+	pgprot_t hugeprot;
+
+	ncontig = num_contig_ptes(sz, &pgsize);
+
+	if (!pte_present(pte)) {
+		for (i = 0; i < ncontig; i++, ptep++, addr += pgsize)
+			set_pte_at(mm, addr, ptep, pte);
+		return;
+	}
+
+	if (!pte_cont(pte)) {
+		set_pte_at(mm, addr, ptep, pte);
+		return;
+	}
+
+	pfn = pte_pfn(pte);
+	dpfn = pgsize >> PAGE_SHIFT;
+	hugeprot = pte_pgprot(pte);
+
+	clear_flush(mm, addr, ptep, pgsize, ncontig);
+
+	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
+		set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
+}
+
+pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
+		      unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgdp;
+	p4d_t *p4dp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+	pte_t *ptep = NULL;
+
+	pgdp = pgd_offset(mm, addr);
+	p4dp = p4d_offset(pgdp, addr);
+	pudp = pud_alloc(mm, p4dp, addr);
+	if (!pudp)
+		return NULL;
+
+	if (sz == PUD_SIZE) {
+		ptep = (pte_t *)pudp;
+	} else if (sz == (CONT_PTE_SIZE)) {
+		pmdp = pmd_alloc(mm, pudp, addr);
+		if (!pmdp)
+			return NULL;
+
+		WARN_ON(addr & (sz - 1));
+		ptep = pte_alloc_huge(mm, pmdp, addr);
+	} else if (sz == PMD_SIZE) {
+		if (want_pmd_share(vma, addr) && pud_none(READ_ONCE(*pudp)))
+			ptep = huge_pmd_share(mm, vma, addr, pudp);
+		else
+			ptep = (pte_t *)pmd_alloc(mm, pudp, addr);
+	} else if (sz == (CONT_PMD_SIZE)) {
+		pmdp = pmd_alloc(mm, pudp, addr);
+		WARN_ON(addr & (sz - 1));
+		return (pte_t *)pmdp;
+	}
+
+	return ptep;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm,
+		       unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgdp;
+	p4d_t *p4dp;
+	pud_t *pudp, pud;
+	pmd_t *pmdp, pmd;
+
+	pgdp = pgd_offset(mm, addr);
+	if (!pgd_present(READ_ONCE(*pgdp)))
+		return NULL;
+
+	p4dp = p4d_offset(pgdp, addr);
+	if (!p4d_present(READ_ONCE(*p4dp)))
+		return NULL;
+
+	pudp = pud_offset(p4dp, addr);
+	pud = READ_ONCE(*pudp);
+	if (sz != PUD_SIZE && pud_none(pud))
+		return NULL;
+	/* hugepage or swap? */
+	if (pud_huge(pud) || !pud_present(pud))
+		return (pte_t *)pudp;
+	/* table; check the next level */
+
+	if (sz == CONT_PMD_SIZE)
+		addr &= CONT_PMD_MASK;
+
+	pmdp = pmd_offset(pudp, addr);
+	pmd = READ_ONCE(*pmdp);
+	if (!(sz == PMD_SIZE || sz == CONT_PMD_SIZE) &&
+	    pmd_none(pmd))
+		return NULL;
+	if (pmd_huge(pmd) || !pmd_present(pmd))
+		return (pte_t *)pmdp;
+
+	if (sz == CONT_PTE_SIZE)
+		return pte_offset_huge(pmdp, (addr & CONT_PTE_MASK));
+
+	return NULL;
+}
+
+unsigned long hugetlb_mask_last_page(struct hstate *h)
+{
+	unsigned long hp_size = huge_page_size(h);
+
+	switch (hp_size) {
+#ifndef __PAGETABLE_PMD_FOLDED
+	case PUD_SIZE:
+		return PGDIR_SIZE - PUD_SIZE;
+#endif
+	case CONT_PMD_SIZE:
+		return PUD_SIZE - CONT_PMD_SIZE;
+	case PMD_SIZE:
+		return PUD_SIZE - PMD_SIZE;
+	case CONT_PTE_SIZE:
+		return PMD_SIZE - CONT_PTE_SIZE;
+	default:
+		break;
+	}
+
+	return 0UL;
+}
+
+pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
+{
+	size_t pagesize = 1UL << shift;
+
+	entry = pte_mkhuge(entry);
+	if (pagesize == CONT_PTE_SIZE) {
+		entry = pte_mkcont(entry);
+	} else if (pagesize == CONT_PMD_SIZE) {
+		entry = pmd_pte(pmd_mkcont(pte_pmd(entry)));
+	} else if (pagesize != PUD_SIZE && pagesize != PMD_SIZE) {
+		pr_warn("%s: unrecognized huge page size 0x%lx\n",
+			__func__, pagesize);
+	}
+	return entry;
+}
+
+void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
+		    pte_t *ptep, unsigned long sz)
+{
+	int i, ncontig;
+	size_t pgsize;
+
+	ncontig = num_contig_ptes(sz, &pgsize);
+
+	for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)
+		pte_clear(mm, addr, ptep);
+}
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+			      unsigned long addr, pte_t *ptep)
+{
+	int ncontig;
+	size_t pgsize;
+	pte_t orig_pte = ptep_get(ptep);
+
+	if (!pte_cont(orig_pte))
+		return ptep_get_and_clear(mm, addr, ptep);
+
+	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+
+	return get_clear_contig(mm, addr, ptep, pgsize, ncontig);
+}
+
+/*
+ * huge_ptep_set_access_flags will update access flags (dirty, accesssed)
+ * and write permission.
+ *
+ * For a contiguous huge pte range we need to check whether or not write
+ * permission has to change only on the first pte in the set. Then for
+ * all the contiguous ptes we need to check whether or not there is a
+ * discrepancy between dirty or young.
+ */
+static int __cont_access_flags_changed(pte_t *ptep, pte_t pte, int ncontig)
+{
+	int i;
+
+	if (pte_write(pte) != pte_write(ptep_get(ptep)))
+		return 1;
+
+	for (i = 0; i < ncontig; i++) {
+		pte_t orig_pte = ptep_get(ptep + i);
+
+		if (pte_dirty(pte) != pte_dirty(orig_pte))
+			return 1;
+
+		if (pte_young(pte) != pte_young(orig_pte))
+			return 1;
+	}
+
+	return 0;
+}
+
+int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+			       unsigned long addr, pte_t *ptep,
+			       pte_t pte, int dirty)
+{
+	int ncontig, i;
+	size_t pgsize = 0;
+	unsigned long pfn = pte_pfn(pte), dpfn;
+	struct mm_struct *mm = vma->vm_mm;
+	pgprot_t hugeprot;
+	pte_t orig_pte;
+
+	if (!pte_cont(pte))
+		return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+
+	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+	dpfn = pgsize >> PAGE_SHIFT;
+
+	if (!__cont_access_flags_changed(ptep, pte, ncontig))
+		return 0;
+
+	orig_pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
+
+	/* Make sure we don't lose the dirty or young state */
+	if (pte_dirty(orig_pte))
+		pte = pte_mkdirty(pte);
+
+	if (pte_young(orig_pte))
+		pte = pte_mkyoung(pte);
+
+	hugeprot = pte_pgprot(pte);
+	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
+		set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
+
+	return 1;
+}
+
+void huge_ptep_set_wrprotect(struct mm_struct *mm,
+			     unsigned long addr, pte_t *ptep)
+{
+	unsigned long pfn, dpfn;
+	pgprot_t hugeprot;
+	int ncontig, i;
+	size_t pgsize;
+	pte_t pte;
+
+	if (!pte_cont(READ_ONCE(*ptep))) {
+		ptep_set_wrprotect(mm, addr, ptep);
+		return;
+	}
+
+	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+	dpfn = pgsize >> PAGE_SHIFT;
+
+	pte = get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
+	pte = pte_wrprotect(pte);
+
+	hugeprot = pte_pgprot(pte);
+	pfn = pte_pfn(pte);
+
+	for (i = 0; i < ncontig; i++, ptep++, addr += pgsize, pfn += dpfn)
+		set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
+}
+
+pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
+			    unsigned long addr, pte_t *ptep)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	size_t pgsize;
+	int ncontig;
+
+	if (!pte_cont(READ_ONCE(*ptep)))
+		return ptep_clear_flush(vma, addr, ptep);
+
+	ncontig = find_num_contig(mm, addr, ptep, &pgsize);
+	return get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
+}
+
+static int __init hugetlbpage_init(void)
+{
+	if (pud_sect_supported())
+		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+
+	hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT);
+	hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	hugetlb_add_hstate(CONT_PTE_SHIFT - PAGE_SHIFT);
+
+	return 0;
+}
+arch_initcall(hugetlbpage_init);
+
+bool __init arch_hugetlb_valid_size(unsigned long size)
+{
+	return __hugetlb_valid_size(size);
+}
+
+pte_t huge_ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) &&
+	    cpus_have_const_cap(ARM64_WORKAROUND_2645198)) {
+		/*
+		 * Break-before-make (BBM) is required for all user space mappings
+		 * when the permission changes from executable to non-executable
+		 * in cases where cpu is affected with errata #2645198.
+		 */
+		if (pte_user_exec(READ_ONCE(*ptep)))
+			return huge_ptep_clear_flush(vma, addr, ptep);
+	}
+	return huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+}
+
+void huge_ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+				  pte_t old_pte, pte_t pte)
+{
+	unsigned long psize = huge_page_size(hstate_vma(vma));
+
+	set_huge_pte_at(vma->vm_mm, addr, ptep, pte, psize);
+}
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
new file mode 100644
index 000000000..8a0f86043
--- /dev/null
+++ b/arch/arm64/mm/init.c
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/init.c
+ *
+ * Copyright (C) 1995-2005 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/swap.h>
+#include <linux/init.h>
+#include <linux/cache.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/initrd.h>
+#include <linux/gfp.h>
+#include <linux/memblock.h>
+#include <linux/sort.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/dma-direct.h>
+#include <linux/dma-map-ops.h>
+#include <linux/efi.h>
+#include <linux/swiotlb.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <linux/hugetlb.h>
+#include <linux/acpi_iort.h>
+#include <linux/kmemleak.h>
+
+#include <asm/boot.h>
+#include <asm/fixmap.h>
+#include <asm/kasan.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/kvm_host.h>
+#include <asm/memory.h>
+#include <asm/numa.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <linux/sizes.h>
+#include <asm/tlb.h>
+#include <asm/alternative.h>
+#include <asm/xen/swiotlb-xen.h>
+
+/*
+ * We need to be able to catch inadvertent references to memstart_addr
+ * that occur (potentially in generic code) before arm64_memblock_init()
+ * executes, which assigns it its actual value. So use a default value
+ * that cannot be mistaken for a real physical address.
+ */
+s64 memstart_addr __ro_after_init = -1;
+EXPORT_SYMBOL(memstart_addr);
+
+/*
+ * If the corresponding config options are enabled, we create both ZONE_DMA
+ * and ZONE_DMA32. By default ZONE_DMA covers the 32-bit addressable memory
+ * unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
+ * In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
+ * otherwise it is empty.
+ */
+phys_addr_t __ro_after_init arm64_dma_phys_limit;
+
+/* Current arm64 boot protocol requires 2MB alignment */
+#define CRASH_ALIGN			SZ_2M
+
+#define CRASH_ADDR_LOW_MAX		arm64_dma_phys_limit
+#define CRASH_ADDR_HIGH_MAX		(PHYS_MASK + 1)
+#define CRASH_HIGH_SEARCH_BASE		SZ_4G
+
+#define DEFAULT_CRASH_KERNEL_LOW_SIZE	(128UL << 20)
+
+/*
+ * To make optimal use of block mappings when laying out the linear
+ * mapping, round down the base of physical memory to a size that can
+ * be mapped efficiently, i.e., either PUD_SIZE (4k granule) or PMD_SIZE
+ * (64k granule), or a multiple that can be mapped using contiguous bits
+ * in the page tables: 32 * PMD_SIZE (16k granule)
+ */
+#if defined(CONFIG_ARM64_4K_PAGES)
+#define ARM64_MEMSTART_SHIFT		PUD_SHIFT
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define ARM64_MEMSTART_SHIFT		CONT_PMD_SHIFT
+#else
+#define ARM64_MEMSTART_SHIFT		PMD_SHIFT
+#endif
+
+/*
+ * sparsemem vmemmap imposes an additional requirement on the alignment of
+ * memstart_addr, due to the fact that the base of the vmemmap region
+ * has a direct correspondence, and needs to appear sufficiently aligned
+ * in the virtual address space.
+ */
+#if ARM64_MEMSTART_SHIFT < SECTION_SIZE_BITS
+#define ARM64_MEMSTART_ALIGN	(1UL << SECTION_SIZE_BITS)
+#else
+#define ARM64_MEMSTART_ALIGN	(1UL << ARM64_MEMSTART_SHIFT)
+#endif
+
+static int __init reserve_crashkernel_low(unsigned long long low_size)
+{
+	unsigned long long low_base;
+
+	low_base = memblock_phys_alloc_range(low_size, CRASH_ALIGN, 0, CRASH_ADDR_LOW_MAX);
+	if (!low_base) {
+		pr_err("cannot allocate crashkernel low memory (size:0x%llx).\n", low_size);
+		return -ENOMEM;
+	}
+
+	pr_info("crashkernel low memory reserved: 0x%08llx - 0x%08llx (%lld MB)\n",
+		low_base, low_base + low_size, low_size >> 20);
+
+	crashk_low_res.start = low_base;
+	crashk_low_res.end   = low_base + low_size - 1;
+	insert_resource(&iomem_resource, &crashk_low_res);
+
+	return 0;
+}
+
+/*
+ * reserve_crashkernel() - reserves memory for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_low_size = 0, search_base = 0;
+	unsigned long long crash_max = CRASH_ADDR_LOW_MAX;
+	unsigned long long crash_base, crash_size;
+	char *cmdline = boot_command_line;
+	bool fixed_base = false;
+	bool high = false;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_KEXEC_CORE))
+		return;
+
+	/* crashkernel=X[@offset] */
+	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
+				&crash_size, &crash_base);
+	if (ret == -ENOENT) {
+		ret = parse_crashkernel_high(cmdline, 0, &crash_size, &crash_base);
+		if (ret || !crash_size)
+			return;
+
+		/*
+		 * crashkernel=Y,low can be specified or not, but invalid value
+		 * is not allowed.
+		 */
+		ret = parse_crashkernel_low(cmdline, 0, &crash_low_size, &crash_base);
+		if (ret == -ENOENT)
+			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
+		else if (ret)
+			return;
+
+		search_base = CRASH_HIGH_SEARCH_BASE;
+		crash_max = CRASH_ADDR_HIGH_MAX;
+		high = true;
+	} else if (ret || !crash_size) {
+		/* The specified value is invalid */
+		return;
+	}
+
+	crash_size = PAGE_ALIGN(crash_size);
+
+	/* User specifies base address explicitly. */
+	if (crash_base) {
+		fixed_base = true;
+		search_base = crash_base;
+		crash_max = crash_base + crash_size;
+	}
+
+retry:
+	crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN,
+					       search_base, crash_max);
+	if (!crash_base) {
+		/*
+		 * For crashkernel=size[KMG]@offset[KMG], print out failure
+		 * message if can't reserve the specified region.
+		 */
+		if (fixed_base) {
+			pr_warn("crashkernel reservation failed - memory is in use.\n");
+			return;
+		}
+
+		/*
+		 * For crashkernel=size[KMG], if the first attempt was for
+		 * low memory, fall back to high memory, the minimum required
+		 * low memory will be reserved later.
+		 */
+		if (!high && crash_max == CRASH_ADDR_LOW_MAX) {
+			crash_max = CRASH_ADDR_HIGH_MAX;
+			search_base = CRASH_ADDR_LOW_MAX;
+			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
+			goto retry;
+		}
+
+		/*
+		 * For crashkernel=size[KMG],high, if the first attempt was
+		 * for high memory, fall back to low memory.
+		 */
+		if (high && crash_max == CRASH_ADDR_HIGH_MAX) {
+			crash_max = CRASH_ADDR_LOW_MAX;
+			search_base = 0;
+			goto retry;
+		}
+		pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
+			crash_size);
+		return;
+	}
+
+	if ((crash_base >= CRASH_ADDR_LOW_MAX) && crash_low_size &&
+	     reserve_crashkernel_low(crash_low_size)) {
+		memblock_phys_free(crash_base, crash_size);
+		return;
+	}
+
+	pr_info("crashkernel reserved: 0x%016llx - 0x%016llx (%lld MB)\n",
+		crash_base, crash_base + crash_size, crash_size >> 20);
+
+	/*
+	 * The crashkernel memory will be removed from the kernel linear
+	 * map. Inform kmemleak so that it won't try to access it.
+	 */
+	kmemleak_ignore_phys(crash_base);
+	if (crashk_low_res.end)
+		kmemleak_ignore_phys(crashk_low_res.start);
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
+}
+
+/*
+ * Return the maximum physical address for a zone accessible by the given bits
+ * limit. If DRAM starts above 32-bit, expand the zone to the maximum
+ * available memory, otherwise cap it at 32-bit.
+ */
+static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
+{
+	phys_addr_t zone_mask = DMA_BIT_MASK(zone_bits);
+	phys_addr_t phys_start = memblock_start_of_DRAM();
+
+	if (phys_start > U32_MAX)
+		zone_mask = PHYS_ADDR_MAX;
+	else if (phys_start > zone_mask)
+		zone_mask = U32_MAX;
+
+	return min(zone_mask, memblock_end_of_DRAM() - 1) + 1;
+}
+
+static void __init zone_sizes_init(void)
+{
+	unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
+	unsigned int __maybe_unused acpi_zone_dma_bits;
+	unsigned int __maybe_unused dt_zone_dma_bits;
+	phys_addr_t __maybe_unused dma32_phys_limit = max_zone_phys(32);
+
+#ifdef CONFIG_ZONE_DMA
+	acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
+	dt_zone_dma_bits = fls64(of_dma_get_max_cpu_address(NULL));
+	zone_dma_bits = min3(32U, dt_zone_dma_bits, acpi_zone_dma_bits);
+	arm64_dma_phys_limit = max_zone_phys(zone_dma_bits);
+	max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
+#endif
+#ifdef CONFIG_ZONE_DMA32
+	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(dma32_phys_limit);
+	if (!arm64_dma_phys_limit)
+		arm64_dma_phys_limit = dma32_phys_limit;
+#endif
+	if (!arm64_dma_phys_limit)
+		arm64_dma_phys_limit = PHYS_MASK + 1;
+	max_zone_pfns[ZONE_NORMAL] = max_pfn;
+
+	free_area_init(max_zone_pfns);
+}
+
+int pfn_is_map_memory(unsigned long pfn)
+{
+	phys_addr_t addr = PFN_PHYS(pfn);
+
+	/* avoid false positives for bogus PFNs, see comment in pfn_valid() */
+	if (PHYS_PFN(addr) != pfn)
+		return 0;
+
+	return memblock_is_map_memory(addr);
+}
+EXPORT_SYMBOL(pfn_is_map_memory);
+
+static phys_addr_t memory_limit __ro_after_init = PHYS_ADDR_MAX;
+
+/*
+ * Limit the memory size that was specified via FDT.
+ */
+static int __init early_mem(char *p)
+{
+	if (!p)
+		return 1;
+
+	memory_limit = memparse(p, &p) & PAGE_MASK;
+	pr_notice("Memory limited to %lldMB\n", memory_limit >> 20);
+
+	return 0;
+}
+early_param("mem", early_mem);
+
+void __init arm64_memblock_init(void)
+{
+	s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
+
+	/*
+	 * Corner case: 52-bit VA capable systems running KVM in nVHE mode may
+	 * be limited in their ability to support a linear map that exceeds 51
+	 * bits of VA space, depending on the placement of the ID map. Given
+	 * that the placement of the ID map may be randomized, let's simply
+	 * limit the kernel's linear map to 51 bits as well if we detect this
+	 * configuration.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) && vabits_actual == 52 &&
+	    is_hyp_mode_available() && !is_kernel_in_hyp_mode()) {
+		pr_info("Capping linear region to 51 bits for KVM in nVHE mode on LVA capable hardware.\n");
+		linear_region_size = min_t(u64, linear_region_size, BIT(51));
+	}
+
+	/* Remove memory above our supported physical address size */
+	memblock_remove(1ULL << PHYS_MASK_SHIFT, ULLONG_MAX);
+
+	/*
+	 * Select a suitable value for the base of physical memory.
+	 */
+	memstart_addr = round_down(memblock_start_of_DRAM(),
+				   ARM64_MEMSTART_ALIGN);
+
+	if ((memblock_end_of_DRAM() - memstart_addr) > linear_region_size)
+		pr_warn("Memory doesn't fit in the linear mapping, VA_BITS too small\n");
+
+	/*
+	 * Remove the memory that we will not be able to cover with the
+	 * linear mapping. Take care not to clip the kernel which may be
+	 * high in memory.
+	 */
+	memblock_remove(max_t(u64, memstart_addr + linear_region_size,
+			__pa_symbol(_end)), ULLONG_MAX);
+	if (memstart_addr + linear_region_size < memblock_end_of_DRAM()) {
+		/* ensure that memstart_addr remains sufficiently aligned */
+		memstart_addr = round_up(memblock_end_of_DRAM() - linear_region_size,
+					 ARM64_MEMSTART_ALIGN);
+		memblock_remove(0, memstart_addr);
+	}
+
+	/*
+	 * If we are running with a 52-bit kernel VA config on a system that
+	 * does not support it, we have to place the available physical
+	 * memory in the 48-bit addressable part of the linear region, i.e.,
+	 * we have to move it upward. Since memstart_addr represents the
+	 * physical address of PAGE_OFFSET, we have to *subtract* from it.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52))
+		memstart_addr -= _PAGE_OFFSET(48) - _PAGE_OFFSET(52);
+
+	/*
+	 * Apply the memory limit if it was set. Since the kernel may be loaded
+	 * high up in memory, add back the kernel region that must be accessible
+	 * via the linear mapping.
+	 */
+	if (memory_limit != PHYS_ADDR_MAX) {
+		memblock_mem_limit_remove_map(memory_limit);
+		memblock_add(__pa_symbol(_text), (u64)(_end - _text));
+	}
+
+	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
+		/*
+		 * Add back the memory we just removed if it results in the
+		 * initrd to become inaccessible via the linear mapping.
+		 * Otherwise, this is a no-op
+		 */
+		u64 base = phys_initrd_start & PAGE_MASK;
+		u64 size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
+
+		/*
+		 * We can only add back the initrd memory if we don't end up
+		 * with more memory than we can address via the linear mapping.
+		 * It is up to the bootloader to position the kernel and the
+		 * initrd reasonably close to each other (i.e., within 32 GB of
+		 * each other) so that all granule/#levels combinations can
+		 * always access both.
+		 */
+		if (WARN(base < memblock_start_of_DRAM() ||
+			 base + size > memblock_start_of_DRAM() +
+				       linear_region_size,
+			"initrd not fully accessible via the linear mapping -- please check your bootloader ...\n")) {
+			phys_initrd_size = 0;
+		} else {
+			memblock_add(base, size);
+			memblock_clear_nomap(base, size);
+			memblock_reserve(base, size);
+		}
+	}
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
+		extern u16 memstart_offset_seed;
+		u64 mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
+		int parange = cpuid_feature_extract_unsigned_field(
+					mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT);
+		s64 range = linear_region_size -
+			    BIT(id_aa64mmfr0_parange_to_phys_shift(parange));
+
+		/*
+		 * If the size of the linear region exceeds, by a sufficient
+		 * margin, the size of the region that the physical memory can
+		 * span, randomize the linear region as well.
+		 */
+		if (memstart_offset_seed > 0 && range >= (s64)ARM64_MEMSTART_ALIGN) {
+			range /= ARM64_MEMSTART_ALIGN;
+			memstart_addr -= ARM64_MEMSTART_ALIGN *
+					 ((range * memstart_offset_seed) >> 16);
+		}
+	}
+
+	/*
+	 * Register the kernel text, kernel data, initrd, and initial
+	 * pagetables with memblock.
+	 */
+	memblock_reserve(__pa_symbol(_stext), _end - _stext);
+	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
+		/* the generic initrd code expects virtual addresses */
+		initrd_start = __phys_to_virt(phys_initrd_start);
+		initrd_end = initrd_start + phys_initrd_size;
+	}
+
+	early_init_fdt_scan_reserved_mem();
+
+	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
+}
+
+void __init bootmem_init(void)
+{
+	unsigned long min, max;
+
+	min = PFN_UP(memblock_start_of_DRAM());
+	max = PFN_DOWN(memblock_end_of_DRAM());
+
+	early_memtest(min << PAGE_SHIFT, max << PAGE_SHIFT);
+
+	max_pfn = max_low_pfn = max;
+	min_low_pfn = min;
+
+	arch_numa_init();
+
+	/*
+	 * must be done after arch_numa_init() which calls numa_init() to
+	 * initialize node_online_map that gets used in hugetlb_cma_reserve()
+	 * while allocating required CMA size across online nodes.
+	 */
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_CMA)
+	arm64_hugetlb_cma_reserve();
+#endif
+
+	kvm_hyp_reserve();
+
+	/*
+	 * sparse_init() tries to allocate memory from memblock, so must be
+	 * done after the fixed reservations
+	 */
+	sparse_init();
+	zone_sizes_init();
+
+	/*
+	 * Reserve the CMA area after arm64_dma_phys_limit was initialised.
+	 */
+	dma_contiguous_reserve(arm64_dma_phys_limit);
+
+	/*
+	 * request_standard_resources() depends on crashkernel's memory being
+	 * reserved, so do it here.
+	 */
+	reserve_crashkernel();
+
+	memblock_dump_all();
+}
+
+/*
+ * mem_init() marks the free areas in the mem_map and tells us how much memory
+ * is free.  This is done after various parts of the system have claimed their
+ * memory after the kernel image.
+ */
+void __init mem_init(void)
+{
+	bool swiotlb = max_pfn > PFN_DOWN(arm64_dma_phys_limit);
+
+	if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC))
+		swiotlb = true;
+
+	swiotlb_init(swiotlb, SWIOTLB_VERBOSE);
+
+	/* this will put all unused low memory onto the freelists */
+	memblock_free_all();
+
+	/*
+	 * Check boundaries twice: Some fundamental inconsistencies can be
+	 * detected at build time already.
+	 */
+#ifdef CONFIG_COMPAT
+	BUILD_BUG_ON(TASK_SIZE_32 > DEFAULT_MAP_WINDOW_64);
+#endif
+
+	/*
+	 * Selected page table levels should match when derived from
+	 * scratch using the virtual address range and page size.
+	 */
+	BUILD_BUG_ON(ARM64_HW_PGTABLE_LEVELS(CONFIG_ARM64_VA_BITS) !=
+		     CONFIG_PGTABLE_LEVELS);
+
+	if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
+		extern int sysctl_overcommit_memory;
+		/*
+		 * On a machine this small we won't get anywhere without
+		 * overcommit, so turn it on by default.
+		 */
+		sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
+	}
+}
+
+void free_initmem(void)
+{
+	free_reserved_area(lm_alias(__init_begin),
+			   lm_alias(__init_end),
+			   POISON_FREE_INITMEM, "unused kernel");
+	/*
+	 * Unmap the __init region but leave the VM area in place. This
+	 * prevents the region from being reused for kernel modules, which
+	 * is not supported by kallsyms.
+	 */
+	vunmap_range((u64)__init_begin, (u64)__init_end);
+}
+
+void dump_mem_limit(void)
+{
+	if (memory_limit != PHYS_ADDR_MAX) {
+		pr_emerg("Memory Limit: %llu MB\n", memory_limit >> 20);
+	} else {
+		pr_emerg("Memory Limit: none\n");
+	}
+}
diff --git a/arch/arm64/mm/ioremap.c b/arch/arm64/mm/ioremap.c
new file mode 100644
index 000000000..269f2f63a
--- /dev/null
+++ b/arch/arm64/mm/ioremap.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/mm.h>
+#include <linux/io.h>
+
+void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
+			   unsigned long prot)
+{
+	unsigned long last_addr = phys_addr + size - 1;
+
+	/* Don't allow outside PHYS_MASK */
+	if (last_addr & ~PHYS_MASK)
+		return NULL;
+
+	/* Don't allow RAM to be mapped. */
+	if (WARN_ON(pfn_is_map_memory(__phys_to_pfn(phys_addr))))
+		return NULL;
+
+	return generic_ioremap_prot(phys_addr, size, __pgprot(prot));
+}
+EXPORT_SYMBOL(ioremap_prot);
+
+/*
+ * Must be called after early_fixmap_init
+ */
+void __init early_ioremap_init(void)
+{
+	early_ioremap_setup();
+}
+
+bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
+				 unsigned long flags)
+{
+	unsigned long pfn = PHYS_PFN(offset);
+
+	return pfn_is_map_memory(pfn);
+}
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
new file mode 100644
index 000000000..f17d066e8
--- /dev/null
+++ b/arch/arm64/mm/kasan_init.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * This file contains kasan initialization code for ARM64.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Author: Andrey Ryabinin <ryabinin.a.a@gmail.com>
+ */
+
+#define pr_fmt(fmt) "kasan: " fmt
+#include <linux/kasan.h>
+#include <linux/kernel.h>
+#include <linux/sched/task.h>
+#include <linux/memblock.h>
+#include <linux/start_kernel.h>
+#include <linux/mm.h>
+
+#include <asm/mmu_context.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+
+static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
+
+/*
+ * The p*d_populate functions call virt_to_phys implicitly so they can't be used
+ * directly on kernel symbols (bm_p*d). All the early functions are called too
+ * early to use lm_alias so __p*d_populate functions must be used to populate
+ * with the physical address from __pa_symbol.
+ */
+
+static phys_addr_t __init kasan_alloc_zeroed_page(int node)
+{
+	void *p = memblock_alloc_try_nid(PAGE_SIZE, PAGE_SIZE,
+					      __pa(MAX_DMA_ADDRESS),
+					      MEMBLOCK_ALLOC_NOLEAKTRACE, node);
+	if (!p)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx nid=%d from=%llx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE, node,
+		      __pa(MAX_DMA_ADDRESS));
+
+	return __pa(p);
+}
+
+static phys_addr_t __init kasan_alloc_raw_page(int node)
+{
+	void *p = memblock_alloc_try_nid_raw(PAGE_SIZE, PAGE_SIZE,
+						__pa(MAX_DMA_ADDRESS),
+						MEMBLOCK_ALLOC_NOLEAKTRACE,
+						node);
+	if (!p)
+		panic("%s: Failed to allocate %lu bytes align=0x%lx nid=%d from=%llx\n",
+		      __func__, PAGE_SIZE, PAGE_SIZE, node,
+		      __pa(MAX_DMA_ADDRESS));
+
+	return __pa(p);
+}
+
+static pte_t *__init kasan_pte_offset(pmd_t *pmdp, unsigned long addr, int node,
+				      bool early)
+{
+	if (pmd_none(READ_ONCE(*pmdp))) {
+		phys_addr_t pte_phys = early ?
+				__pa_symbol(kasan_early_shadow_pte)
+					: kasan_alloc_zeroed_page(node);
+		__pmd_populate(pmdp, pte_phys, PMD_TYPE_TABLE);
+	}
+
+	return early ? pte_offset_kimg(pmdp, addr)
+		     : pte_offset_kernel(pmdp, addr);
+}
+
+static pmd_t *__init kasan_pmd_offset(pud_t *pudp, unsigned long addr, int node,
+				      bool early)
+{
+	if (pud_none(READ_ONCE(*pudp))) {
+		phys_addr_t pmd_phys = early ?
+				__pa_symbol(kasan_early_shadow_pmd)
+					: kasan_alloc_zeroed_page(node);
+		__pud_populate(pudp, pmd_phys, PUD_TYPE_TABLE);
+	}
+
+	return early ? pmd_offset_kimg(pudp, addr) : pmd_offset(pudp, addr);
+}
+
+static pud_t *__init kasan_pud_offset(p4d_t *p4dp, unsigned long addr, int node,
+				      bool early)
+{
+	if (p4d_none(READ_ONCE(*p4dp))) {
+		phys_addr_t pud_phys = early ?
+				__pa_symbol(kasan_early_shadow_pud)
+					: kasan_alloc_zeroed_page(node);
+		__p4d_populate(p4dp, pud_phys, P4D_TYPE_TABLE);
+	}
+
+	return early ? pud_offset_kimg(p4dp, addr) : pud_offset(p4dp, addr);
+}
+
+static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
+				      unsigned long end, int node, bool early)
+{
+	unsigned long next;
+	pte_t *ptep = kasan_pte_offset(pmdp, addr, node, early);
+
+	do {
+		phys_addr_t page_phys = early ?
+				__pa_symbol(kasan_early_shadow_page)
+					: kasan_alloc_raw_page(node);
+		if (!early)
+			memset(__va(page_phys), KASAN_SHADOW_INIT, PAGE_SIZE);
+		next = addr + PAGE_SIZE;
+		set_pte(ptep, pfn_pte(__phys_to_pfn(page_phys), PAGE_KERNEL));
+	} while (ptep++, addr = next, addr != end && pte_none(READ_ONCE(*ptep)));
+}
+
+static void __init kasan_pmd_populate(pud_t *pudp, unsigned long addr,
+				      unsigned long end, int node, bool early)
+{
+	unsigned long next;
+	pmd_t *pmdp = kasan_pmd_offset(pudp, addr, node, early);
+
+	do {
+		next = pmd_addr_end(addr, end);
+		kasan_pte_populate(pmdp, addr, next, node, early);
+	} while (pmdp++, addr = next, addr != end && pmd_none(READ_ONCE(*pmdp)));
+}
+
+static void __init kasan_pud_populate(p4d_t *p4dp, unsigned long addr,
+				      unsigned long end, int node, bool early)
+{
+	unsigned long next;
+	pud_t *pudp = kasan_pud_offset(p4dp, addr, node, early);
+
+	do {
+		next = pud_addr_end(addr, end);
+		kasan_pmd_populate(pudp, addr, next, node, early);
+	} while (pudp++, addr = next, addr != end && pud_none(READ_ONCE(*pudp)));
+}
+
+static void __init kasan_p4d_populate(pgd_t *pgdp, unsigned long addr,
+				      unsigned long end, int node, bool early)
+{
+	unsigned long next;
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+
+	do {
+		next = p4d_addr_end(addr, end);
+		kasan_pud_populate(p4dp, addr, next, node, early);
+	} while (p4dp++, addr = next, addr != end);
+}
+
+static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
+				      int node, bool early)
+{
+	unsigned long next;
+	pgd_t *pgdp;
+
+	pgdp = pgd_offset_k(addr);
+	do {
+		next = pgd_addr_end(addr, end);
+		kasan_p4d_populate(pgdp, addr, next, node, early);
+	} while (pgdp++, addr = next, addr != end);
+}
+
+/* The early shadow maps everything to a single page of zeroes */
+asmlinkage void __init kasan_early_init(void)
+{
+	BUILD_BUG_ON(KASAN_SHADOW_OFFSET !=
+		KASAN_SHADOW_END - (1UL << (64 - KASAN_SHADOW_SCALE_SHIFT)));
+	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS), PGDIR_SIZE));
+	BUILD_BUG_ON(!IS_ALIGNED(_KASAN_SHADOW_START(VA_BITS_MIN), PGDIR_SIZE));
+	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
+	kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, NUMA_NO_NODE,
+			   true);
+}
+
+/* Set up full kasan mappings, ensuring that the mapped pages are zeroed */
+static void __init kasan_map_populate(unsigned long start, unsigned long end,
+				      int node)
+{
+	kasan_pgd_populate(start & PAGE_MASK, PAGE_ALIGN(end), node, false);
+}
+
+/*
+ * Copy the current shadow region into a new pgdir.
+ */
+void __init kasan_copy_shadow(pgd_t *pgdir)
+{
+	pgd_t *pgdp, *pgdp_new, *pgdp_end;
+
+	pgdp = pgd_offset_k(KASAN_SHADOW_START);
+	pgdp_end = pgd_offset_k(KASAN_SHADOW_END);
+	pgdp_new = pgd_offset_pgd(pgdir, KASAN_SHADOW_START);
+	do {
+		set_pgd(pgdp_new, READ_ONCE(*pgdp));
+	} while (pgdp++, pgdp_new++, pgdp != pgdp_end);
+}
+
+static void __init clear_pgds(unsigned long start,
+			unsigned long end)
+{
+	/*
+	 * Remove references to kasan page tables from
+	 * swapper_pg_dir. pgd_clear() can't be used
+	 * here because it's nop on 2,3-level pagetable setups
+	 */
+	for (; start < end; start += PGDIR_SIZE)
+		set_pgd(pgd_offset_k(start), __pgd(0));
+}
+
+static void __init kasan_init_shadow(void)
+{
+	u64 kimg_shadow_start, kimg_shadow_end;
+	u64 mod_shadow_start;
+	u64 vmalloc_shadow_end;
+	phys_addr_t pa_start, pa_end;
+	u64 i;
+
+	kimg_shadow_start = (u64)kasan_mem_to_shadow(KERNEL_START) & PAGE_MASK;
+	kimg_shadow_end = PAGE_ALIGN((u64)kasan_mem_to_shadow(KERNEL_END));
+
+	mod_shadow_start = (u64)kasan_mem_to_shadow((void *)MODULES_VADDR);
+
+	vmalloc_shadow_end = (u64)kasan_mem_to_shadow((void *)VMALLOC_END);
+
+	/*
+	 * We are going to perform proper setup of shadow memory.
+	 * At first we should unmap early shadow (clear_pgds() call below).
+	 * However, instrumented code couldn't execute without shadow memory.
+	 * tmp_pg_dir used to keep early shadow mapped until full shadow
+	 * setup will be finished.
+	 */
+	memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
+	dsb(ishst);
+	cpu_replace_ttbr1(lm_alias(tmp_pg_dir), idmap_pg_dir);
+
+	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
+
+	kasan_map_populate(kimg_shadow_start, kimg_shadow_end,
+			   early_pfn_to_nid(virt_to_pfn(lm_alias(KERNEL_START))));
+
+	kasan_populate_early_shadow(kasan_mem_to_shadow((void *)PAGE_END),
+				   (void *)mod_shadow_start);
+
+	BUILD_BUG_ON(VMALLOC_START != MODULES_END);
+	kasan_populate_early_shadow((void *)vmalloc_shadow_end,
+				    (void *)KASAN_SHADOW_END);
+
+	for_each_mem_range(i, &pa_start, &pa_end) {
+		void *start = (void *)__phys_to_virt(pa_start);
+		void *end = (void *)__phys_to_virt(pa_end);
+
+		if (start >= end)
+			break;
+
+		kasan_map_populate((unsigned long)kasan_mem_to_shadow(start),
+				   (unsigned long)kasan_mem_to_shadow(end),
+				   early_pfn_to_nid(virt_to_pfn(start)));
+	}
+
+	/*
+	 * KAsan may reuse the contents of kasan_early_shadow_pte directly,
+	 * so we should make sure that it maps the zero page read-only.
+	 */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte(&kasan_early_shadow_pte[i],
+			pfn_pte(sym_to_pfn(kasan_early_shadow_page),
+				PAGE_KERNEL_RO));
+
+	memset(kasan_early_shadow_page, KASAN_SHADOW_INIT, PAGE_SIZE);
+	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), idmap_pg_dir);
+}
+
+static void __init kasan_init_depth(void)
+{
+	init_task.kasan_depth = 0;
+}
+
+#ifdef CONFIG_KASAN_VMALLOC
+void __init kasan_populate_early_vm_area_shadow(void *start, unsigned long size)
+{
+	unsigned long shadow_start, shadow_end;
+
+	if (!is_vmalloc_or_module_addr(start))
+		return;
+
+	shadow_start = (unsigned long)kasan_mem_to_shadow(start);
+	shadow_start = ALIGN_DOWN(shadow_start, PAGE_SIZE);
+	shadow_end = (unsigned long)kasan_mem_to_shadow(start + size);
+	shadow_end = ALIGN(shadow_end, PAGE_SIZE);
+	kasan_map_populate(shadow_start, shadow_end, NUMA_NO_NODE);
+}
+#endif
+
+void __init kasan_init(void)
+{
+	kasan_init_shadow();
+	kasan_init_depth();
+#if defined(CONFIG_KASAN_GENERIC)
+	/* CONFIG_KASAN_SW_TAGS also requires kasan_init_sw_tags(). */
+	pr_info("KernelAddressSanitizer initialized (generic)\n");
+#endif
+}
+
+#endif /* CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS */
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
new file mode 100644
index 000000000..8f5b7ce85
--- /dev/null
+++ b/arch/arm64/mm/mmap.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/mmap.c
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+
+#include <asm/cpufeature.h>
+#include <asm/page.h>
+
+static pgprot_t protection_map[16] __ro_after_init = {
+	[VM_NONE]					= PAGE_NONE,
+	[VM_READ]					= PAGE_READONLY,
+	[VM_WRITE]					= PAGE_READONLY,
+	[VM_WRITE | VM_READ]				= PAGE_READONLY,
+	/* PAGE_EXECONLY if Enhanced PAN */
+	[VM_EXEC]					= PAGE_READONLY_EXEC,
+	[VM_EXEC | VM_READ]				= PAGE_READONLY_EXEC,
+	[VM_EXEC | VM_WRITE]				= PAGE_READONLY_EXEC,
+	[VM_EXEC | VM_WRITE | VM_READ]			= PAGE_READONLY_EXEC,
+	[VM_SHARED]					= PAGE_NONE,
+	[VM_SHARED | VM_READ]				= PAGE_READONLY,
+	[VM_SHARED | VM_WRITE]				= PAGE_SHARED,
+	[VM_SHARED | VM_WRITE | VM_READ]		= PAGE_SHARED,
+	/* PAGE_EXECONLY if Enhanced PAN */
+	[VM_SHARED | VM_EXEC]				= PAGE_READONLY_EXEC,
+	[VM_SHARED | VM_EXEC | VM_READ]			= PAGE_READONLY_EXEC,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= PAGE_SHARED_EXEC,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= PAGE_SHARED_EXEC
+};
+
+/*
+ * You really shouldn't be using read() or write() on /dev/mem.  This might go
+ * away in the future.
+ */
+int valid_phys_addr_range(phys_addr_t addr, size_t size)
+{
+	/*
+	 * Check whether addr is covered by a memory region without the
+	 * MEMBLOCK_NOMAP attribute, and whether that region covers the
+	 * entire range. In theory, this could lead to false negatives
+	 * if the range is covered by distinct but adjacent memory regions
+	 * that only differ in other attributes. However, few of such
+	 * attributes have been defined, and it is debatable whether it
+	 * follows that /dev/mem read() calls should be able traverse
+	 * such boundaries.
+	 */
+	return memblock_is_region_memory(addr, size) &&
+	       memblock_is_map_memory(addr);
+}
+
+/*
+ * Do not allow /dev/mem mappings beyond the supported physical range.
+ */
+int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
+{
+	return !(((pfn << PAGE_SHIFT) + size) & ~PHYS_MASK);
+}
+
+static int __init adjust_protection_map(void)
+{
+	/*
+	 * With Enhanced PAN we can honour the execute-only permissions as
+	 * there is no PAN override with such mappings.
+	 */
+	if (cpus_have_const_cap(ARM64_HAS_EPAN)) {
+		protection_map[VM_EXEC] = PAGE_EXECONLY;
+		protection_map[VM_EXEC | VM_SHARED] = PAGE_EXECONLY;
+	}
+
+	return 0;
+}
+arch_initcall(adjust_protection_map);
+
+pgprot_t vm_get_page_prot(unsigned long vm_flags)
+{
+	pteval_t prot = pgprot_val(protection_map[vm_flags &
+				   (VM_READ|VM_WRITE|VM_EXEC|VM_SHARED)]);
+
+	if (vm_flags & VM_ARM64_BTI)
+		prot |= PTE_GP;
+
+	/*
+	 * There are two conditions required for returning a Normal Tagged
+	 * memory type: (1) the user requested it via PROT_MTE passed to
+	 * mmap() or mprotect() and (2) the corresponding vma supports MTE. We
+	 * register (1) as VM_MTE in the vma->vm_flags and (2) as
+	 * VM_MTE_ALLOWED. Note that the latter can only be set during the
+	 * mmap() call since mprotect() does not accept MAP_* flags.
+	 * Checking for VM_MTE only is sufficient since arch_validate_flags()
+	 * does not permit (VM_MTE & !VM_MTE_ALLOWED).
+	 */
+	if (vm_flags & VM_MTE)
+		prot |= PTE_ATTRINDX(MT_NORMAL_TAGGED);
+
+	return __pgprot(prot);
+}
+EXPORT_SYMBOL(vm_get_page_prot);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
new file mode 100644
index 000000000..47781bec6
--- /dev/null
+++ b/arch/arm64/mm/mmu.c
@@ -0,0 +1,1489 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Based on arch/arm/mm/mmu.c
+ *
+ * Copyright (C) 1995-2005 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ */
+
+#include <linux/cache.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kexec.h>
+#include <linux/libfdt.h>
+#include <linux/mman.h>
+#include <linux/nodemask.h>
+#include <linux/memblock.h>
+#include <linux/memremap.h>
+#include <linux/memory.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/set_memory.h>
+#include <linux/kfence.h>
+
+#include <asm/barrier.h>
+#include <asm/cputype.h>
+#include <asm/fixmap.h>
+#include <asm/kasan.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <linux/sizes.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/ptdump.h>
+#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+#include <asm/kfence.h>
+
+#define NO_BLOCK_MAPPINGS	BIT(0)
+#define NO_CONT_MAPPINGS	BIT(1)
+#define NO_EXEC_MAPPINGS	BIT(2)	/* assumes FEAT_HPDS is not used */
+
+int idmap_t0sz __ro_after_init;
+
+#if VA_BITS > 48
+u64 vabits_actual __ro_after_init = VA_BITS_MIN;
+EXPORT_SYMBOL(vabits_actual);
+#endif
+
+u64 kimage_vaddr __ro_after_init = (u64)&_text;
+EXPORT_SYMBOL(kimage_vaddr);
+
+u64 kimage_voffset __ro_after_init;
+EXPORT_SYMBOL(kimage_voffset);
+
+u32 __boot_cpu_mode[] = { BOOT_CPU_MODE_EL2, BOOT_CPU_MODE_EL1 };
+
+/*
+ * The booting CPU updates the failed status @__early_cpu_boot_status,
+ * with MMU turned off.
+ */
+long __section(".mmuoff.data.write") __early_cpu_boot_status;
+
+/*
+ * Empty_zero_page is a special page that is used for zero-initialized data
+ * and COW.
+ */
+unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
+EXPORT_SYMBOL(empty_zero_page);
+
+static DEFINE_SPINLOCK(swapper_pgdir_lock);
+static DEFINE_MUTEX(fixmap_lock);
+
+void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
+{
+	pgd_t *fixmap_pgdp;
+
+	spin_lock(&swapper_pgdir_lock);
+	fixmap_pgdp = pgd_set_fixmap(__pa_symbol(pgdp));
+	WRITE_ONCE(*fixmap_pgdp, pgd);
+	/*
+	 * We need dsb(ishst) here to ensure the page-table-walker sees
+	 * our new entry before set_p?d() returns. The fixmap's
+	 * flush_tlb_kernel_range() via clear_fixmap() does this for us.
+	 */
+	pgd_clear_fixmap();
+	spin_unlock(&swapper_pgdir_lock);
+}
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (!pfn_is_map_memory(pfn))
+		return pgprot_noncached(vma_prot);
+	else if (file->f_flags & O_SYNC)
+		return pgprot_writecombine(vma_prot);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+
+static phys_addr_t __init early_pgtable_alloc(int shift)
+{
+	phys_addr_t phys;
+	void *ptr;
+
+	phys = memblock_phys_alloc_range(PAGE_SIZE, PAGE_SIZE, 0,
+					 MEMBLOCK_ALLOC_NOLEAKTRACE);
+	if (!phys)
+		panic("Failed to allocate page table page\n");
+
+	/*
+	 * The FIX_{PGD,PUD,PMD} slots may be in active use, but the FIX_PTE
+	 * slot will be free, so we can (ab)use the FIX_PTE slot to initialise
+	 * any level of table.
+	 */
+	ptr = pte_set_fixmap(phys);
+
+	memset(ptr, 0, PAGE_SIZE);
+
+	/*
+	 * Implicit barriers also ensure the zeroed page is visible to the page
+	 * table walker
+	 */
+	pte_clear_fixmap();
+
+	return phys;
+}
+
+bool pgattr_change_is_safe(u64 old, u64 new)
+{
+	/*
+	 * The following mapping attributes may be updated in live
+	 * kernel mappings without the need for break-before-make.
+	 */
+	pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE | PTE_NG;
+
+	/* creating or taking down mappings is always safe */
+	if (!pte_valid(__pte(old)) || !pte_valid(__pte(new)))
+		return true;
+
+	/* A live entry's pfn should not change */
+	if (pte_pfn(__pte(old)) != pte_pfn(__pte(new)))
+		return false;
+
+	/* live contiguous mappings may not be manipulated at all */
+	if ((old | new) & PTE_CONT)
+		return false;
+
+	/* Transitioning from Non-Global to Global is unsafe */
+	if (old & ~new & PTE_NG)
+		return false;
+
+	/*
+	 * Changing the memory type between Normal and Normal-Tagged is safe
+	 * since Tagged is considered a permission attribute from the
+	 * mismatched attribute aliases perspective.
+	 */
+	if (((old & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL) ||
+	     (old & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL_TAGGED)) &&
+	    ((new & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL) ||
+	     (new & PTE_ATTRINDX_MASK) == PTE_ATTRINDX(MT_NORMAL_TAGGED)))
+		mask |= PTE_ATTRINDX_MASK;
+
+	return ((old ^ new) & ~mask) == 0;
+}
+
+static void init_pte(pmd_t *pmdp, unsigned long addr, unsigned long end,
+		     phys_addr_t phys, pgprot_t prot)
+{
+	pte_t *ptep;
+
+	ptep = pte_set_fixmap_offset(pmdp, addr);
+	do {
+		pte_t old_pte = READ_ONCE(*ptep);
+
+		set_pte(ptep, pfn_pte(__phys_to_pfn(phys), prot));
+
+		/*
+		 * After the PTE entry has been populated once, we
+		 * only allow updates to the permission attributes.
+		 */
+		BUG_ON(!pgattr_change_is_safe(pte_val(old_pte),
+					      READ_ONCE(pte_val(*ptep))));
+
+		phys += PAGE_SIZE;
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+
+	pte_clear_fixmap();
+}
+
+static void alloc_init_cont_pte(pmd_t *pmdp, unsigned long addr,
+				unsigned long end, phys_addr_t phys,
+				pgprot_t prot,
+				phys_addr_t (*pgtable_alloc)(int),
+				int flags)
+{
+	unsigned long next;
+	pmd_t pmd = READ_ONCE(*pmdp);
+
+	BUG_ON(pmd_sect(pmd));
+	if (pmd_none(pmd)) {
+		pmdval_t pmdval = PMD_TYPE_TABLE | PMD_TABLE_UXN;
+		phys_addr_t pte_phys;
+
+		if (flags & NO_EXEC_MAPPINGS)
+			pmdval |= PMD_TABLE_PXN;
+		BUG_ON(!pgtable_alloc);
+		pte_phys = pgtable_alloc(PAGE_SHIFT);
+		__pmd_populate(pmdp, pte_phys, pmdval);
+		pmd = READ_ONCE(*pmdp);
+	}
+	BUG_ON(pmd_bad(pmd));
+
+	do {
+		pgprot_t __prot = prot;
+
+		next = pte_cont_addr_end(addr, end);
+
+		/* use a contiguous mapping if the range is suitably aligned */
+		if ((((addr | next | phys) & ~CONT_PTE_MASK) == 0) &&
+		    (flags & NO_CONT_MAPPINGS) == 0)
+			__prot = __pgprot(pgprot_val(prot) | PTE_CONT);
+
+		init_pte(pmdp, addr, next, phys, __prot);
+
+		phys += next - addr;
+	} while (addr = next, addr != end);
+}
+
+static void init_pmd(pud_t *pudp, unsigned long addr, unsigned long end,
+		     phys_addr_t phys, pgprot_t prot,
+		     phys_addr_t (*pgtable_alloc)(int), int flags)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_set_fixmap_offset(pudp, addr);
+	do {
+		pmd_t old_pmd = READ_ONCE(*pmdp);
+
+		next = pmd_addr_end(addr, end);
+
+		/* try section mapping first */
+		if (((addr | next | phys) & ~PMD_MASK) == 0 &&
+		    (flags & NO_BLOCK_MAPPINGS) == 0) {
+			pmd_set_huge(pmdp, phys, prot);
+
+			/*
+			 * After the PMD entry has been populated once, we
+			 * only allow updates to the permission attributes.
+			 */
+			BUG_ON(!pgattr_change_is_safe(pmd_val(old_pmd),
+						      READ_ONCE(pmd_val(*pmdp))));
+		} else {
+			alloc_init_cont_pte(pmdp, addr, next, phys, prot,
+					    pgtable_alloc, flags);
+
+			BUG_ON(pmd_val(old_pmd) != 0 &&
+			       pmd_val(old_pmd) != READ_ONCE(pmd_val(*pmdp)));
+		}
+		phys += next - addr;
+	} while (pmdp++, addr = next, addr != end);
+
+	pmd_clear_fixmap();
+}
+
+static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
+				unsigned long end, phys_addr_t phys,
+				pgprot_t prot,
+				phys_addr_t (*pgtable_alloc)(int), int flags)
+{
+	unsigned long next;
+	pud_t pud = READ_ONCE(*pudp);
+
+	/*
+	 * Check for initial section mappings in the pgd/pud.
+	 */
+	BUG_ON(pud_sect(pud));
+	if (pud_none(pud)) {
+		pudval_t pudval = PUD_TYPE_TABLE | PUD_TABLE_UXN;
+		phys_addr_t pmd_phys;
+
+		if (flags & NO_EXEC_MAPPINGS)
+			pudval |= PUD_TABLE_PXN;
+		BUG_ON(!pgtable_alloc);
+		pmd_phys = pgtable_alloc(PMD_SHIFT);
+		__pud_populate(pudp, pmd_phys, pudval);
+		pud = READ_ONCE(*pudp);
+	}
+	BUG_ON(pud_bad(pud));
+
+	do {
+		pgprot_t __prot = prot;
+
+		next = pmd_cont_addr_end(addr, end);
+
+		/* use a contiguous mapping if the range is suitably aligned */
+		if ((((addr | next | phys) & ~CONT_PMD_MASK) == 0) &&
+		    (flags & NO_CONT_MAPPINGS) == 0)
+			__prot = __pgprot(pgprot_val(prot) | PTE_CONT);
+
+		init_pmd(pudp, addr, next, phys, __prot, pgtable_alloc, flags);
+
+		phys += next - addr;
+	} while (addr = next, addr != end);
+}
+
+static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
+			   phys_addr_t phys, pgprot_t prot,
+			   phys_addr_t (*pgtable_alloc)(int),
+			   int flags)
+{
+	unsigned long next;
+	pud_t *pudp;
+	p4d_t *p4dp = p4d_offset(pgdp, addr);
+	p4d_t p4d = READ_ONCE(*p4dp);
+
+	if (p4d_none(p4d)) {
+		p4dval_t p4dval = P4D_TYPE_TABLE | P4D_TABLE_UXN;
+		phys_addr_t pud_phys;
+
+		if (flags & NO_EXEC_MAPPINGS)
+			p4dval |= P4D_TABLE_PXN;
+		BUG_ON(!pgtable_alloc);
+		pud_phys = pgtable_alloc(PUD_SHIFT);
+		__p4d_populate(p4dp, pud_phys, p4dval);
+		p4d = READ_ONCE(*p4dp);
+	}
+	BUG_ON(p4d_bad(p4d));
+
+	pudp = pud_set_fixmap_offset(p4dp, addr);
+	do {
+		pud_t old_pud = READ_ONCE(*pudp);
+
+		next = pud_addr_end(addr, end);
+
+		/*
+		 * For 4K granule only, attempt to put down a 1GB block
+		 */
+		if (pud_sect_supported() &&
+		   ((addr | next | phys) & ~PUD_MASK) == 0 &&
+		    (flags & NO_BLOCK_MAPPINGS) == 0) {
+			pud_set_huge(pudp, phys, prot);
+
+			/*
+			 * After the PUD entry has been populated once, we
+			 * only allow updates to the permission attributes.
+			 */
+			BUG_ON(!pgattr_change_is_safe(pud_val(old_pud),
+						      READ_ONCE(pud_val(*pudp))));
+		} else {
+			alloc_init_cont_pmd(pudp, addr, next, phys, prot,
+					    pgtable_alloc, flags);
+
+			BUG_ON(pud_val(old_pud) != 0 &&
+			       pud_val(old_pud) != READ_ONCE(pud_val(*pudp)));
+		}
+		phys += next - addr;
+	} while (pudp++, addr = next, addr != end);
+
+	pud_clear_fixmap();
+}
+
+static void __create_pgd_mapping_locked(pgd_t *pgdir, phys_addr_t phys,
+					unsigned long virt, phys_addr_t size,
+					pgprot_t prot,
+					phys_addr_t (*pgtable_alloc)(int),
+					int flags)
+{
+	unsigned long addr, end, next;
+	pgd_t *pgdp = pgd_offset_pgd(pgdir, virt);
+
+	/*
+	 * If the virtual and physical address don't have the same offset
+	 * within a page, we cannot map the region as the caller expects.
+	 */
+	if (WARN_ON((phys ^ virt) & ~PAGE_MASK))
+		return;
+
+	phys &= PAGE_MASK;
+	addr = virt & PAGE_MASK;
+	end = PAGE_ALIGN(virt + size);
+
+	do {
+		next = pgd_addr_end(addr, end);
+		alloc_init_pud(pgdp, addr, next, phys, prot, pgtable_alloc,
+			       flags);
+		phys += next - addr;
+	} while (pgdp++, addr = next, addr != end);
+}
+
+static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
+				 unsigned long virt, phys_addr_t size,
+				 pgprot_t prot,
+				 phys_addr_t (*pgtable_alloc)(int),
+				 int flags)
+{
+	mutex_lock(&fixmap_lock);
+	__create_pgd_mapping_locked(pgdir, phys, virt, size, prot,
+				    pgtable_alloc, flags);
+	mutex_unlock(&fixmap_lock);
+}
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+extern __alias(__create_pgd_mapping_locked)
+void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
+			     phys_addr_t size, pgprot_t prot,
+			     phys_addr_t (*pgtable_alloc)(int), int flags);
+#endif
+
+static phys_addr_t __pgd_pgtable_alloc(int shift)
+{
+	void *ptr = (void *)__get_free_page(GFP_PGTABLE_KERNEL);
+	BUG_ON(!ptr);
+
+	/* Ensure the zeroed page is visible to the page table walker */
+	dsb(ishst);
+	return __pa(ptr);
+}
+
+static phys_addr_t pgd_pgtable_alloc(int shift)
+{
+	phys_addr_t pa = __pgd_pgtable_alloc(shift);
+	struct ptdesc *ptdesc = page_ptdesc(phys_to_page(pa));
+
+	/*
+	 * Call proper page table ctor in case later we need to
+	 * call core mm functions like apply_to_page_range() on
+	 * this pre-allocated page table.
+	 *
+	 * We don't select ARCH_ENABLE_SPLIT_PMD_PTLOCK if pmd is
+	 * folded, and if so pagetable_pte_ctor() becomes nop.
+	 */
+	if (shift == PAGE_SHIFT)
+		BUG_ON(!pagetable_pte_ctor(ptdesc));
+	else if (shift == PMD_SHIFT)
+		BUG_ON(!pagetable_pmd_ctor(ptdesc));
+
+	return pa;
+}
+
+/*
+ * This function can only be used to modify existing table entries,
+ * without allocating new levels of table. Note that this permits the
+ * creation of new section or page entries.
+ */
+void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
+				   phys_addr_t size, pgprot_t prot)
+{
+	if (virt < PAGE_OFFSET) {
+		pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n",
+			&phys, virt);
+		return;
+	}
+	__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
+			     NO_CONT_MAPPINGS);
+}
+
+void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
+			       unsigned long virt, phys_addr_t size,
+			       pgprot_t prot, bool page_mappings_only)
+{
+	int flags = 0;
+
+	BUG_ON(mm == &init_mm);
+
+	if (page_mappings_only)
+		flags = NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+
+	__create_pgd_mapping(mm->pgd, phys, virt, size, prot,
+			     pgd_pgtable_alloc, flags);
+}
+
+static void update_mapping_prot(phys_addr_t phys, unsigned long virt,
+				phys_addr_t size, pgprot_t prot)
+{
+	if (virt < PAGE_OFFSET) {
+		pr_warn("BUG: not updating mapping for %pa at 0x%016lx - outside kernel range\n",
+			&phys, virt);
+		return;
+	}
+
+	__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot, NULL,
+			     NO_CONT_MAPPINGS);
+
+	/* flush the TLBs after updating live kernel mappings */
+	flush_tlb_kernel_range(virt, virt + size);
+}
+
+static void __init __map_memblock(pgd_t *pgdp, phys_addr_t start,
+				  phys_addr_t end, pgprot_t prot, int flags)
+{
+	__create_pgd_mapping(pgdp, start, __phys_to_virt(start), end - start,
+			     prot, early_pgtable_alloc, flags);
+}
+
+void __init mark_linear_text_alias_ro(void)
+{
+	/*
+	 * Remove the write permissions from the linear alias of .text/.rodata
+	 */
+	update_mapping_prot(__pa_symbol(_stext), (unsigned long)lm_alias(_stext),
+			    (unsigned long)__init_begin - (unsigned long)_stext,
+			    PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_KFENCE
+
+bool __ro_after_init kfence_early_init = !!CONFIG_KFENCE_SAMPLE_INTERVAL;
+
+/* early_param() will be parsed before map_mem() below. */
+static int __init parse_kfence_early_init(char *arg)
+{
+	int val;
+
+	if (get_option(&arg, &val))
+		kfence_early_init = !!val;
+	return 0;
+}
+early_param("kfence.sample_interval", parse_kfence_early_init);
+
+static phys_addr_t __init arm64_kfence_alloc_pool(void)
+{
+	phys_addr_t kfence_pool;
+
+	if (!kfence_early_init)
+		return 0;
+
+	kfence_pool = memblock_phys_alloc(KFENCE_POOL_SIZE, PAGE_SIZE);
+	if (!kfence_pool) {
+		pr_err("failed to allocate kfence pool\n");
+		kfence_early_init = false;
+		return 0;
+	}
+
+	/* Temporarily mark as NOMAP. */
+	memblock_mark_nomap(kfence_pool, KFENCE_POOL_SIZE);
+
+	return kfence_pool;
+}
+
+static void __init arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp)
+{
+	if (!kfence_pool)
+		return;
+
+	/* KFENCE pool needs page-level mapping. */
+	__map_memblock(pgdp, kfence_pool, kfence_pool + KFENCE_POOL_SIZE,
+			pgprot_tagged(PAGE_KERNEL),
+			NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+	memblock_clear_nomap(kfence_pool, KFENCE_POOL_SIZE);
+	__kfence_pool = phys_to_virt(kfence_pool);
+}
+#else /* CONFIG_KFENCE */
+
+static inline phys_addr_t arm64_kfence_alloc_pool(void) { return 0; }
+static inline void arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp) { }
+
+#endif /* CONFIG_KFENCE */
+
+static void __init map_mem(pgd_t *pgdp)
+{
+	static const u64 direct_map_end = _PAGE_END(VA_BITS_MIN);
+	phys_addr_t kernel_start = __pa_symbol(_stext);
+	phys_addr_t kernel_end = __pa_symbol(__init_begin);
+	phys_addr_t start, end;
+	phys_addr_t early_kfence_pool;
+	int flags = NO_EXEC_MAPPINGS;
+	u64 i;
+
+	/*
+	 * Setting hierarchical PXNTable attributes on table entries covering
+	 * the linear region is only possible if it is guaranteed that no table
+	 * entries at any level are being shared between the linear region and
+	 * the vmalloc region. Check whether this is true for the PGD level, in
+	 * which case it is guaranteed to be true for all other levels as well.
+	 */
+	BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end));
+
+	early_kfence_pool = arm64_kfence_alloc_pool();
+
+	if (can_set_direct_map())
+		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+
+	/*
+	 * Take care not to create a writable alias for the
+	 * read-only text and rodata sections of the kernel image.
+	 * So temporarily mark them as NOMAP to skip mappings in
+	 * the following for-loop
+	 */
+	memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
+
+	/* map all the memory banks */
+	for_each_mem_range(i, &start, &end) {
+		if (start >= end)
+			break;
+		/*
+		 * The linear map must allow allocation tags reading/writing
+		 * if MTE is present. Otherwise, it has the same attributes as
+		 * PAGE_KERNEL.
+		 */
+		__map_memblock(pgdp, start, end, pgprot_tagged(PAGE_KERNEL),
+			       flags);
+	}
+
+	/*
+	 * Map the linear alias of the [_stext, __init_begin) interval
+	 * as non-executable now, and remove the write permission in
+	 * mark_linear_text_alias_ro() below (which will be called after
+	 * alternative patching has completed). This makes the contents
+	 * of the region accessible to subsystems such as hibernate,
+	 * but protects it from inadvertent modification or execution.
+	 * Note that contiguous mappings cannot be remapped in this way,
+	 * so we should avoid them here.
+	 */
+	__map_memblock(pgdp, kernel_start, kernel_end,
+		       PAGE_KERNEL, NO_CONT_MAPPINGS);
+	memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
+	arm64_kfence_map_pool(early_kfence_pool, pgdp);
+}
+
+void mark_rodata_ro(void)
+{
+	unsigned long section_size;
+
+	/*
+	 * mark .rodata as read only. Use __init_begin rather than __end_rodata
+	 * to cover NOTES and EXCEPTION_TABLE.
+	 */
+	section_size = (unsigned long)__init_begin - (unsigned long)__start_rodata;
+	update_mapping_prot(__pa_symbol(__start_rodata), (unsigned long)__start_rodata,
+			    section_size, PAGE_KERNEL_RO);
+
+	debug_checkwx();
+}
+
+static void __init map_kernel_segment(pgd_t *pgdp, void *va_start, void *va_end,
+				      pgprot_t prot, struct vm_struct *vma,
+				      int flags, unsigned long vm_flags)
+{
+	phys_addr_t pa_start = __pa_symbol(va_start);
+	unsigned long size = va_end - va_start;
+
+	BUG_ON(!PAGE_ALIGNED(pa_start));
+	BUG_ON(!PAGE_ALIGNED(size));
+
+	__create_pgd_mapping(pgdp, pa_start, (unsigned long)va_start, size, prot,
+			     early_pgtable_alloc, flags);
+
+	if (!(vm_flags & VM_NO_GUARD))
+		size += PAGE_SIZE;
+
+	vma->addr	= va_start;
+	vma->phys_addr	= pa_start;
+	vma->size	= size;
+	vma->flags	= VM_MAP | vm_flags;
+	vma->caller	= __builtin_return_address(0);
+
+	vm_area_add_early(vma);
+}
+
+static pgprot_t kernel_exec_prot(void)
+{
+	return rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC;
+}
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+static int __init map_entry_trampoline(void)
+{
+	int i;
+
+	pgprot_t prot = kernel_exec_prot();
+	phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
+
+	/* The trampoline is always mapped and can therefore be global */
+	pgprot_val(prot) &= ~PTE_NG;
+
+	/* Map only the text into the trampoline page table */
+	memset(tramp_pg_dir, 0, PGD_SIZE);
+	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS,
+			     entry_tramp_text_size(), prot,
+			     __pgd_pgtable_alloc, NO_BLOCK_MAPPINGS);
+
+	/* Map both the text and data into the kernel page table */
+	for (i = 0; i < DIV_ROUND_UP(entry_tramp_text_size(), PAGE_SIZE); i++)
+		__set_fixmap(FIX_ENTRY_TRAMP_TEXT1 - i,
+			     pa_start + i * PAGE_SIZE, prot);
+
+	if (IS_ENABLED(CONFIG_RELOCATABLE))
+		__set_fixmap(FIX_ENTRY_TRAMP_TEXT1 - i,
+			     pa_start + i * PAGE_SIZE, PAGE_KERNEL_RO);
+
+	return 0;
+}
+core_initcall(map_entry_trampoline);
+#endif
+
+/*
+ * Open coded check for BTI, only for use to determine configuration
+ * for early mappings for before the cpufeature code has run.
+ */
+static bool arm64_early_this_cpu_has_bti(void)
+{
+	u64 pfr1;
+
+	if (!IS_ENABLED(CONFIG_ARM64_BTI_KERNEL))
+		return false;
+
+	pfr1 = __read_sysreg_by_encoding(SYS_ID_AA64PFR1_EL1);
+	return cpuid_feature_extract_unsigned_field(pfr1,
+						    ID_AA64PFR1_EL1_BT_SHIFT);
+}
+
+/*
+ * Create fine-grained mappings for the kernel.
+ */
+static void __init map_kernel(pgd_t *pgdp)
+{
+	static struct vm_struct vmlinux_text, vmlinux_rodata, vmlinux_inittext,
+				vmlinux_initdata, vmlinux_data;
+
+	/*
+	 * External debuggers may need to write directly to the text
+	 * mapping to install SW breakpoints. Allow this (only) when
+	 * explicitly requested with rodata=off.
+	 */
+	pgprot_t text_prot = kernel_exec_prot();
+
+	/*
+	 * If we have a CPU that supports BTI and a kernel built for
+	 * BTI then mark the kernel executable text as guarded pages
+	 * now so we don't have to rewrite the page tables later.
+	 */
+	if (arm64_early_this_cpu_has_bti())
+		text_prot = __pgprot_modify(text_prot, PTE_GP, PTE_GP);
+
+	/*
+	 * Only rodata will be remapped with different permissions later on,
+	 * all other segments are allowed to use contiguous mappings.
+	 */
+	map_kernel_segment(pgdp, _stext, _etext, text_prot, &vmlinux_text, 0,
+			   VM_NO_GUARD);
+	map_kernel_segment(pgdp, __start_rodata, __inittext_begin, PAGE_KERNEL,
+			   &vmlinux_rodata, NO_CONT_MAPPINGS, VM_NO_GUARD);
+	map_kernel_segment(pgdp, __inittext_begin, __inittext_end, text_prot,
+			   &vmlinux_inittext, 0, VM_NO_GUARD);
+	map_kernel_segment(pgdp, __initdata_begin, __initdata_end, PAGE_KERNEL,
+			   &vmlinux_initdata, 0, VM_NO_GUARD);
+	map_kernel_segment(pgdp, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0);
+
+	fixmap_copy(pgdp);
+	kasan_copy_shadow(pgdp);
+}
+
+static void __init create_idmap(void)
+{
+	u64 start = __pa_symbol(__idmap_text_start);
+	u64 size = __pa_symbol(__idmap_text_end) - start;
+	pgd_t *pgd = idmap_pg_dir;
+	u64 pgd_phys;
+
+	/* check if we need an additional level of translation */
+	if (VA_BITS < 48 && idmap_t0sz < (64 - VA_BITS_MIN)) {
+		pgd_phys = early_pgtable_alloc(PAGE_SHIFT);
+		set_pgd(&idmap_pg_dir[start >> VA_BITS],
+			__pgd(pgd_phys | P4D_TYPE_TABLE));
+		pgd = __va(pgd_phys);
+	}
+	__create_pgd_mapping(pgd, start, start, size, PAGE_KERNEL_ROX,
+			     early_pgtable_alloc, 0);
+
+	if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0)) {
+		extern u32 __idmap_kpti_flag;
+		u64 pa = __pa_symbol(&__idmap_kpti_flag);
+
+		/*
+		 * The KPTI G-to-nG conversion code needs a read-write mapping
+		 * of its synchronization flag in the ID map.
+		 */
+		__create_pgd_mapping(pgd, pa, pa, sizeof(u32), PAGE_KERNEL,
+				     early_pgtable_alloc, 0);
+	}
+}
+
+void __init paging_init(void)
+{
+	pgd_t *pgdp = pgd_set_fixmap(__pa_symbol(swapper_pg_dir));
+	extern pgd_t init_idmap_pg_dir[];
+
+	idmap_t0sz = 63UL - __fls(__pa_symbol(_end) | GENMASK(VA_BITS_MIN - 1, 0));
+
+	map_kernel(pgdp);
+	map_mem(pgdp);
+
+	pgd_clear_fixmap();
+
+	cpu_replace_ttbr1(lm_alias(swapper_pg_dir), init_idmap_pg_dir);
+	init_mm.pgd = swapper_pg_dir;
+
+	memblock_phys_free(__pa_symbol(init_pg_dir),
+			   __pa_symbol(init_pg_end) - __pa_symbol(init_pg_dir));
+
+	memblock_allow_resize();
+
+	create_idmap();
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static void free_hotplug_page_range(struct page *page, size_t size,
+				    struct vmem_altmap *altmap)
+{
+	if (altmap) {
+		vmem_altmap_free(altmap, size >> PAGE_SHIFT);
+	} else {
+		WARN_ON(PageReserved(page));
+		free_pages((unsigned long)page_address(page), get_order(size));
+	}
+}
+
+static void free_hotplug_pgtable_page(struct page *page)
+{
+	free_hotplug_page_range(page, PAGE_SIZE, NULL);
+}
+
+static bool pgtable_range_aligned(unsigned long start, unsigned long end,
+				  unsigned long floor, unsigned long ceiling,
+				  unsigned long mask)
+{
+	start &= mask;
+	if (start < floor)
+		return false;
+
+	if (ceiling) {
+		ceiling &= mask;
+		if (!ceiling)
+			return false;
+	}
+
+	if (end - 1 > ceiling - 1)
+		return false;
+	return true;
+}
+
+static void unmap_hotplug_pte_range(pmd_t *pmdp, unsigned long addr,
+				    unsigned long end, bool free_mapped,
+				    struct vmem_altmap *altmap)
+{
+	pte_t *ptep, pte;
+
+	do {
+		ptep = pte_offset_kernel(pmdp, addr);
+		pte = READ_ONCE(*ptep);
+		if (pte_none(pte))
+			continue;
+
+		WARN_ON(!pte_present(pte));
+		pte_clear(&init_mm, addr, ptep);
+		flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
+		if (free_mapped)
+			free_hotplug_page_range(pte_page(pte),
+						PAGE_SIZE, altmap);
+	} while (addr += PAGE_SIZE, addr < end);
+}
+
+static void unmap_hotplug_pmd_range(pud_t *pudp, unsigned long addr,
+				    unsigned long end, bool free_mapped,
+				    struct vmem_altmap *altmap)
+{
+	unsigned long next;
+	pmd_t *pmdp, pmd;
+
+	do {
+		next = pmd_addr_end(addr, end);
+		pmdp = pmd_offset(pudp, addr);
+		pmd = READ_ONCE(*pmdp);
+		if (pmd_none(pmd))
+			continue;
+
+		WARN_ON(!pmd_present(pmd));
+		if (pmd_sect(pmd)) {
+			pmd_clear(pmdp);
+
+			/*
+			 * One TLBI should be sufficient here as the PMD_SIZE
+			 * range is mapped with a single block entry.
+			 */
+			flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
+			if (free_mapped)
+				free_hotplug_page_range(pmd_page(pmd),
+							PMD_SIZE, altmap);
+			continue;
+		}
+		WARN_ON(!pmd_table(pmd));
+		unmap_hotplug_pte_range(pmdp, addr, next, free_mapped, altmap);
+	} while (addr = next, addr < end);
+}
+
+static void unmap_hotplug_pud_range(p4d_t *p4dp, unsigned long addr,
+				    unsigned long end, bool free_mapped,
+				    struct vmem_altmap *altmap)
+{
+	unsigned long next;
+	pud_t *pudp, pud;
+
+	do {
+		next = pud_addr_end(addr, end);
+		pudp = pud_offset(p4dp, addr);
+		pud = READ_ONCE(*pudp);
+		if (pud_none(pud))
+			continue;
+
+		WARN_ON(!pud_present(pud));
+		if (pud_sect(pud)) {
+			pud_clear(pudp);
+
+			/*
+			 * One TLBI should be sufficient here as the PUD_SIZE
+			 * range is mapped with a single block entry.
+			 */
+			flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
+			if (free_mapped)
+				free_hotplug_page_range(pud_page(pud),
+							PUD_SIZE, altmap);
+			continue;
+		}
+		WARN_ON(!pud_table(pud));
+		unmap_hotplug_pmd_range(pudp, addr, next, free_mapped, altmap);
+	} while (addr = next, addr < end);
+}
+
+static void unmap_hotplug_p4d_range(pgd_t *pgdp, unsigned long addr,
+				    unsigned long end, bool free_mapped,
+				    struct vmem_altmap *altmap)
+{
+	unsigned long next;
+	p4d_t *p4dp, p4d;
+
+	do {
+		next = p4d_addr_end(addr, end);
+		p4dp = p4d_offset(pgdp, addr);
+		p4d = READ_ONCE(*p4dp);
+		if (p4d_none(p4d))
+			continue;
+
+		WARN_ON(!p4d_present(p4d));
+		unmap_hotplug_pud_range(p4dp, addr, next, free_mapped, altmap);
+	} while (addr = next, addr < end);
+}
+
+static void unmap_hotplug_range(unsigned long addr, unsigned long end,
+				bool free_mapped, struct vmem_altmap *altmap)
+{
+	unsigned long next;
+	pgd_t *pgdp, pgd;
+
+	/*
+	 * altmap can only be used as vmemmap mapping backing memory.
+	 * In case the backing memory itself is not being freed, then
+	 * altmap is irrelevant. Warn about this inconsistency when
+	 * encountered.
+	 */
+	WARN_ON(!free_mapped && altmap);
+
+	do {
+		next = pgd_addr_end(addr, end);
+		pgdp = pgd_offset_k(addr);
+		pgd = READ_ONCE(*pgdp);
+		if (pgd_none(pgd))
+			continue;
+
+		WARN_ON(!pgd_present(pgd));
+		unmap_hotplug_p4d_range(pgdp, addr, next, free_mapped, altmap);
+	} while (addr = next, addr < end);
+}
+
+static void free_empty_pte_table(pmd_t *pmdp, unsigned long addr,
+				 unsigned long end, unsigned long floor,
+				 unsigned long ceiling)
+{
+	pte_t *ptep, pte;
+	unsigned long i, start = addr;
+
+	do {
+		ptep = pte_offset_kernel(pmdp, addr);
+		pte = READ_ONCE(*ptep);
+
+		/*
+		 * This is just a sanity check here which verifies that
+		 * pte clearing has been done by earlier unmap loops.
+		 */
+		WARN_ON(!pte_none(pte));
+	} while (addr += PAGE_SIZE, addr < end);
+
+	if (!pgtable_range_aligned(start, end, floor, ceiling, PMD_MASK))
+		return;
+
+	/*
+	 * Check whether we can free the pte page if the rest of the
+	 * entries are empty. Overlap with other regions have been
+	 * handled by the floor/ceiling check.
+	 */
+	ptep = pte_offset_kernel(pmdp, 0UL);
+	for (i = 0; i < PTRS_PER_PTE; i++) {
+		if (!pte_none(READ_ONCE(ptep[i])))
+			return;
+	}
+
+	pmd_clear(pmdp);
+	__flush_tlb_kernel_pgtable(start);
+	free_hotplug_pgtable_page(virt_to_page(ptep));
+}
+
+static void free_empty_pmd_table(pud_t *pudp, unsigned long addr,
+				 unsigned long end, unsigned long floor,
+				 unsigned long ceiling)
+{
+	pmd_t *pmdp, pmd;
+	unsigned long i, next, start = addr;
+
+	do {
+		next = pmd_addr_end(addr, end);
+		pmdp = pmd_offset(pudp, addr);
+		pmd = READ_ONCE(*pmdp);
+		if (pmd_none(pmd))
+			continue;
+
+		WARN_ON(!pmd_present(pmd) || !pmd_table(pmd) || pmd_sect(pmd));
+		free_empty_pte_table(pmdp, addr, next, floor, ceiling);
+	} while (addr = next, addr < end);
+
+	if (CONFIG_PGTABLE_LEVELS <= 2)
+		return;
+
+	if (!pgtable_range_aligned(start, end, floor, ceiling, PUD_MASK))
+		return;
+
+	/*
+	 * Check whether we can free the pmd page if the rest of the
+	 * entries are empty. Overlap with other regions have been
+	 * handled by the floor/ceiling check.
+	 */
+	pmdp = pmd_offset(pudp, 0UL);
+	for (i = 0; i < PTRS_PER_PMD; i++) {
+		if (!pmd_none(READ_ONCE(pmdp[i])))
+			return;
+	}
+
+	pud_clear(pudp);
+	__flush_tlb_kernel_pgtable(start);
+	free_hotplug_pgtable_page(virt_to_page(pmdp));
+}
+
+static void free_empty_pud_table(p4d_t *p4dp, unsigned long addr,
+				 unsigned long end, unsigned long floor,
+				 unsigned long ceiling)
+{
+	pud_t *pudp, pud;
+	unsigned long i, next, start = addr;
+
+	do {
+		next = pud_addr_end(addr, end);
+		pudp = pud_offset(p4dp, addr);
+		pud = READ_ONCE(*pudp);
+		if (pud_none(pud))
+			continue;
+
+		WARN_ON(!pud_present(pud) || !pud_table(pud) || pud_sect(pud));
+		free_empty_pmd_table(pudp, addr, next, floor, ceiling);
+	} while (addr = next, addr < end);
+
+	if (CONFIG_PGTABLE_LEVELS <= 3)
+		return;
+
+	if (!pgtable_range_aligned(start, end, floor, ceiling, PGDIR_MASK))
+		return;
+
+	/*
+	 * Check whether we can free the pud page if the rest of the
+	 * entries are empty. Overlap with other regions have been
+	 * handled by the floor/ceiling check.
+	 */
+	pudp = pud_offset(p4dp, 0UL);
+	for (i = 0; i < PTRS_PER_PUD; i++) {
+		if (!pud_none(READ_ONCE(pudp[i])))
+			return;
+	}
+
+	p4d_clear(p4dp);
+	__flush_tlb_kernel_pgtable(start);
+	free_hotplug_pgtable_page(virt_to_page(pudp));
+}
+
+static void free_empty_p4d_table(pgd_t *pgdp, unsigned long addr,
+				 unsigned long end, unsigned long floor,
+				 unsigned long ceiling)
+{
+	unsigned long next;
+	p4d_t *p4dp, p4d;
+
+	do {
+		next = p4d_addr_end(addr, end);
+		p4dp = p4d_offset(pgdp, addr);
+		p4d = READ_ONCE(*p4dp);
+		if (p4d_none(p4d))
+			continue;
+
+		WARN_ON(!p4d_present(p4d));
+		free_empty_pud_table(p4dp, addr, next, floor, ceiling);
+	} while (addr = next, addr < end);
+}
+
+static void free_empty_tables(unsigned long addr, unsigned long end,
+			      unsigned long floor, unsigned long ceiling)
+{
+	unsigned long next;
+	pgd_t *pgdp, pgd;
+
+	do {
+		next = pgd_addr_end(addr, end);
+		pgdp = pgd_offset_k(addr);
+		pgd = READ_ONCE(*pgdp);
+		if (pgd_none(pgd))
+			continue;
+
+		WARN_ON(!pgd_present(pgd));
+		free_empty_p4d_table(pgdp, addr, next, floor, ceiling);
+	} while (addr = next, addr < end);
+}
+#endif
+
+void __meminit vmemmap_set_pmd(pmd_t *pmdp, void *p, int node,
+			       unsigned long addr, unsigned long next)
+{
+	pmd_set_huge(pmdp, __pa(p), __pgprot(PROT_SECT_NORMAL));
+}
+
+int __meminit vmemmap_check_pmd(pmd_t *pmdp, int node,
+				unsigned long addr, unsigned long next)
+{
+	vmemmap_verify((pte_t *)pmdp, node, addr, next);
+	return 1;
+}
+
+int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
+		struct vmem_altmap *altmap)
+{
+	WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END));
+
+	if (!IS_ENABLED(CONFIG_ARM64_4K_PAGES))
+		return vmemmap_populate_basepages(start, end, node, altmap);
+	else
+		return vmemmap_populate_hugepages(start, end, node, altmap);
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+void vmemmap_free(unsigned long start, unsigned long end,
+		struct vmem_altmap *altmap)
+{
+	WARN_ON((start < VMEMMAP_START) || (end > VMEMMAP_END));
+
+	unmap_hotplug_range(start, end, true, altmap);
+	free_empty_tables(start, end, VMEMMAP_START, VMEMMAP_END);
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+int pud_set_huge(pud_t *pudp, phys_addr_t phys, pgprot_t prot)
+{
+	pud_t new_pud = pfn_pud(__phys_to_pfn(phys), mk_pud_sect_prot(prot));
+
+	/* Only allow permission changes for now */
+	if (!pgattr_change_is_safe(READ_ONCE(pud_val(*pudp)),
+				   pud_val(new_pud)))
+		return 0;
+
+	VM_BUG_ON(phys & ~PUD_MASK);
+	set_pud(pudp, new_pud);
+	return 1;
+}
+
+int pmd_set_huge(pmd_t *pmdp, phys_addr_t phys, pgprot_t prot)
+{
+	pmd_t new_pmd = pfn_pmd(__phys_to_pfn(phys), mk_pmd_sect_prot(prot));
+
+	/* Only allow permission changes for now */
+	if (!pgattr_change_is_safe(READ_ONCE(pmd_val(*pmdp)),
+				   pmd_val(new_pmd)))
+		return 0;
+
+	VM_BUG_ON(phys & ~PMD_MASK);
+	set_pmd(pmdp, new_pmd);
+	return 1;
+}
+
+int pud_clear_huge(pud_t *pudp)
+{
+	if (!pud_sect(READ_ONCE(*pudp)))
+		return 0;
+	pud_clear(pudp);
+	return 1;
+}
+
+int pmd_clear_huge(pmd_t *pmdp)
+{
+	if (!pmd_sect(READ_ONCE(*pmdp)))
+		return 0;
+	pmd_clear(pmdp);
+	return 1;
+}
+
+int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
+{
+	pte_t *table;
+	pmd_t pmd;
+
+	pmd = READ_ONCE(*pmdp);
+
+	if (!pmd_table(pmd)) {
+		VM_WARN_ON(1);
+		return 1;
+	}
+
+	table = pte_offset_kernel(pmdp, addr);
+	pmd_clear(pmdp);
+	__flush_tlb_kernel_pgtable(addr);
+	pte_free_kernel(NULL, table);
+	return 1;
+}
+
+int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
+{
+	pmd_t *table;
+	pmd_t *pmdp;
+	pud_t pud;
+	unsigned long next, end;
+
+	pud = READ_ONCE(*pudp);
+
+	if (!pud_table(pud)) {
+		VM_WARN_ON(1);
+		return 1;
+	}
+
+	table = pmd_offset(pudp, addr);
+	pmdp = table;
+	next = addr;
+	end = addr + PUD_SIZE;
+	do {
+		pmd_free_pte_page(pmdp, next);
+	} while (pmdp++, next += PMD_SIZE, next != end);
+
+	pud_clear(pudp);
+	__flush_tlb_kernel_pgtable(addr);
+	pmd_free(NULL, table);
+	return 1;
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static void __remove_pgd_mapping(pgd_t *pgdir, unsigned long start, u64 size)
+{
+	unsigned long end = start + size;
+
+	WARN_ON(pgdir != init_mm.pgd);
+	WARN_ON((start < PAGE_OFFSET) || (end > PAGE_END));
+
+	unmap_hotplug_range(start, end, false, NULL);
+	free_empty_tables(start, end, PAGE_OFFSET, PAGE_END);
+}
+
+struct range arch_get_mappable_range(void)
+{
+	struct range mhp_range;
+	u64 start_linear_pa = __pa(_PAGE_OFFSET(vabits_actual));
+	u64 end_linear_pa = __pa(PAGE_END - 1);
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
+		/*
+		 * Check for a wrap, it is possible because of randomized linear
+		 * mapping the start physical address is actually bigger than
+		 * the end physical address. In this case set start to zero
+		 * because [0, end_linear_pa] range must still be able to cover
+		 * all addressable physical addresses.
+		 */
+		if (start_linear_pa > end_linear_pa)
+			start_linear_pa = 0;
+	}
+
+	WARN_ON(start_linear_pa > end_linear_pa);
+
+	/*
+	 * Linear mapping region is the range [PAGE_OFFSET..(PAGE_END - 1)]
+	 * accommodating both its ends but excluding PAGE_END. Max physical
+	 * range which can be mapped inside this linear mapping range, must
+	 * also be derived from its end points.
+	 */
+	mhp_range.start = start_linear_pa;
+	mhp_range.end =  end_linear_pa;
+
+	return mhp_range;
+}
+
+int arch_add_memory(int nid, u64 start, u64 size,
+		    struct mhp_params *params)
+{
+	int ret, flags = NO_EXEC_MAPPINGS;
+
+	VM_BUG_ON(!mhp_range_allowed(start, size, true));
+
+	if (can_set_direct_map())
+		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+
+	__create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
+			     size, params->pgprot, __pgd_pgtable_alloc,
+			     flags);
+
+	memblock_clear_nomap(start, size);
+
+	ret = __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT,
+			   params);
+	if (ret)
+		__remove_pgd_mapping(swapper_pg_dir,
+				     __phys_to_virt(start), size);
+	else {
+		max_pfn = PFN_UP(start + size);
+		max_low_pfn = max_pfn;
+	}
+
+	return ret;
+}
+
+void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
+{
+	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long nr_pages = size >> PAGE_SHIFT;
+
+	__remove_pages(start_pfn, nr_pages, altmap);
+	__remove_pgd_mapping(swapper_pg_dir, __phys_to_virt(start), size);
+}
+
+/*
+ * This memory hotplug notifier helps prevent boot memory from being
+ * inadvertently removed as it blocks pfn range offlining process in
+ * __offline_pages(). Hence this prevents both offlining as well as
+ * removal process for boot memory which is initially always online.
+ * In future if and when boot memory could be removed, this notifier
+ * should be dropped and free_hotplug_page_range() should handle any
+ * reserved pages allocated during boot.
+ */
+static int prevent_bootmem_remove_notifier(struct notifier_block *nb,
+					   unsigned long action, void *data)
+{
+	struct mem_section *ms;
+	struct memory_notify *arg = data;
+	unsigned long end_pfn = arg->start_pfn + arg->nr_pages;
+	unsigned long pfn = arg->start_pfn;
+
+	if ((action != MEM_GOING_OFFLINE) && (action != MEM_OFFLINE))
+		return NOTIFY_OK;
+
+	for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
+		unsigned long start = PFN_PHYS(pfn);
+		unsigned long end = start + (1UL << PA_SECTION_SHIFT);
+
+		ms = __pfn_to_section(pfn);
+		if (!early_section(ms))
+			continue;
+
+		if (action == MEM_GOING_OFFLINE) {
+			/*
+			 * Boot memory removal is not supported. Prevent
+			 * it via blocking any attempted offline request
+			 * for the boot memory and just report it.
+			 */
+			pr_warn("Boot memory [%lx %lx] offlining attempted\n", start, end);
+			return NOTIFY_BAD;
+		} else if (action == MEM_OFFLINE) {
+			/*
+			 * This should have never happened. Boot memory
+			 * offlining should have been prevented by this
+			 * very notifier. Probably some memory removal
+			 * procedure might have changed which would then
+			 * require further debug.
+			 */
+			pr_err("Boot memory [%lx %lx] offlined\n", start, end);
+
+			/*
+			 * Core memory hotplug does not process a return
+			 * code from the notifier for MEM_OFFLINE events.
+			 * The error condition has been reported. Return
+			 * from here as if ignored.
+			 */
+			return NOTIFY_DONE;
+		}
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block prevent_bootmem_remove_nb = {
+	.notifier_call = prevent_bootmem_remove_notifier,
+};
+
+/*
+ * This ensures that boot memory sections on the platform are online
+ * from early boot. Memory sections could not be prevented from being
+ * offlined, unless for some reason they are not online to begin with.
+ * This helps validate the basic assumption on which the above memory
+ * event notifier works to prevent boot memory section offlining and
+ * its possible removal.
+ */
+static void validate_bootmem_online(void)
+{
+	phys_addr_t start, end, addr;
+	struct mem_section *ms;
+	u64 i;
+
+	/*
+	 * Scanning across all memblock might be expensive
+	 * on some big memory systems. Hence enable this
+	 * validation only with DEBUG_VM.
+	 */
+	if (!IS_ENABLED(CONFIG_DEBUG_VM))
+		return;
+
+	for_each_mem_range(i, &start, &end) {
+		for (addr = start; addr < end; addr += (1UL << PA_SECTION_SHIFT)) {
+			ms = __pfn_to_section(PHYS_PFN(addr));
+
+			/*
+			 * All memory ranges in the system at this point
+			 * should have been marked as early sections.
+			 */
+			WARN_ON(!early_section(ms));
+
+			/*
+			 * Memory notifier mechanism here to prevent boot
+			 * memory offlining depends on the fact that each
+			 * early section memory on the system is initially
+			 * online. Otherwise a given memory section which
+			 * is already offline will be overlooked and can
+			 * be removed completely. Call out such sections.
+			 */
+			if (!online_section(ms))
+				pr_err("Boot memory [%llx %llx] is offline, can be removed\n",
+					addr, addr + (1UL << PA_SECTION_SHIFT));
+		}
+	}
+}
+
+static int __init prevent_bootmem_remove_init(void)
+{
+	int ret = 0;
+
+	if (!IS_ENABLED(CONFIG_MEMORY_HOTREMOVE))
+		return ret;
+
+	validate_bootmem_online();
+	ret = register_memory_notifier(&prevent_bootmem_remove_nb);
+	if (ret)
+		pr_err("%s: Notifier registration failed %d\n", __func__, ret);
+
+	return ret;
+}
+early_initcall(prevent_bootmem_remove_init);
+#endif
+
+pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+	if (IS_ENABLED(CONFIG_ARM64_ERRATUM_2645198) &&
+	    cpus_have_const_cap(ARM64_WORKAROUND_2645198)) {
+		/*
+		 * Break-before-make (BBM) is required for all user space mappings
+		 * when the permission changes from executable to non-executable
+		 * in cases where cpu is affected with errata #2645198.
+		 */
+		if (pte_user_exec(READ_ONCE(*ptep)))
+			return ptep_clear_flush(vma, addr, ptep);
+	}
+	return ptep_get_and_clear(vma->vm_mm, addr, ptep);
+}
+
+void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep,
+			     pte_t old_pte, pte_t pte)
+{
+	set_pte_at(vma->vm_mm, addr, ptep, pte);
+}
diff --git a/arch/arm64/mm/mteswap.c b/arch/arm64/mm/mteswap.c
new file mode 100644
index 000000000..a31833e3d
--- /dev/null
+++ b/arch/arm64/mm/mteswap.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/pagemap.h>
+#include <linux/xarray.h>
+#include <linux/slab.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
+#include <asm/mte.h>
+
+static DEFINE_XARRAY(mte_pages);
+
+void *mte_allocate_tag_storage(void)
+{
+	/* tags granule is 16 bytes, 2 tags stored per byte */
+	return kmalloc(MTE_PAGE_TAG_STORAGE, GFP_KERNEL);
+}
+
+void mte_free_tag_storage(char *storage)
+{
+	kfree(storage);
+}
+
+int mte_save_tags(struct page *page)
+{
+	void *tag_storage, *ret;
+
+	if (!page_mte_tagged(page))
+		return 0;
+
+	tag_storage = mte_allocate_tag_storage();
+	if (!tag_storage)
+		return -ENOMEM;
+
+	mte_save_page_tags(page_address(page), tag_storage);
+
+	/* lookup the swap entry.val from the page */
+	ret = xa_store(&mte_pages, page_swap_entry(page).val, tag_storage,
+		       GFP_KERNEL);
+	if (WARN(xa_is_err(ret), "Failed to store MTE tags")) {
+		mte_free_tag_storage(tag_storage);
+		return xa_err(ret);
+	} else if (ret) {
+		/* Entry is being replaced, free the old entry */
+		mte_free_tag_storage(ret);
+	}
+
+	return 0;
+}
+
+void mte_restore_tags(swp_entry_t entry, struct page *page)
+{
+	void *tags = xa_load(&mte_pages, entry.val);
+
+	if (!tags)
+		return;
+
+	if (try_page_mte_tagging(page)) {
+		mte_restore_page_tags(page_address(page), tags);
+		set_page_mte_tagged(page);
+	}
+}
+
+void mte_invalidate_tags(int type, pgoff_t offset)
+{
+	swp_entry_t entry = swp_entry(type, offset);
+	void *tags = xa_erase(&mte_pages, entry.val);
+
+	mte_free_tag_storage(tags);
+}
+
+void mte_invalidate_tags_area(int type)
+{
+	swp_entry_t entry = swp_entry(type, 0);
+	swp_entry_t last_entry = swp_entry(type + 1, 0);
+	void *tags;
+
+	XA_STATE(xa_state, &mte_pages, entry.val);
+
+	xa_lock(&mte_pages);
+	xas_for_each(&xa_state, tags, last_entry.val - 1) {
+		__xa_erase(&mte_pages, xa_state.xa_index);
+		mte_free_tag_storage(tags);
+	}
+	xa_unlock(&mte_pages);
+}
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
new file mode 100644
index 000000000..924843f1f
--- /dev/null
+++ b/arch/arm64/mm/pageattr.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+
+#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
+#include <asm/tlbflush.h>
+#include <asm/kfence.h>
+
+struct page_change_data {
+	pgprot_t set_mask;
+	pgprot_t clear_mask;
+};
+
+bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED);
+
+bool can_set_direct_map(void)
+{
+	/*
+	 * rodata_full and DEBUG_PAGEALLOC require linear map to be
+	 * mapped at page granularity, so that it is possible to
+	 * protect/unprotect single pages.
+	 *
+	 * KFENCE pool requires page-granular mapping if initialized late.
+	 */
+	return rodata_full || debug_pagealloc_enabled() ||
+	       arm64_kfence_can_set_direct_map();
+}
+
+static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
+{
+	struct page_change_data *cdata = data;
+	pte_t pte = READ_ONCE(*ptep);
+
+	pte = clear_pte_bit(pte, cdata->clear_mask);
+	pte = set_pte_bit(pte, cdata->set_mask);
+
+	set_pte(ptep, pte);
+	return 0;
+}
+
+/*
+ * This function assumes that the range is mapped with PAGE_SIZE pages.
+ */
+static int __change_memory_common(unsigned long start, unsigned long size,
+				pgprot_t set_mask, pgprot_t clear_mask)
+{
+	struct page_change_data data;
+	int ret;
+
+	data.set_mask = set_mask;
+	data.clear_mask = clear_mask;
+
+	ret = apply_to_page_range(&init_mm, start, size, change_page_range,
+					&data);
+
+	flush_tlb_kernel_range(start, start + size);
+	return ret;
+}
+
+static int change_memory_common(unsigned long addr, int numpages,
+				pgprot_t set_mask, pgprot_t clear_mask)
+{
+	unsigned long start = addr;
+	unsigned long size = PAGE_SIZE * numpages;
+	unsigned long end = start + size;
+	struct vm_struct *area;
+	int i;
+
+	if (!PAGE_ALIGNED(addr)) {
+		start &= PAGE_MASK;
+		end = start + size;
+		WARN_ON_ONCE(1);
+	}
+
+	/*
+	 * Kernel VA mappings are always live, and splitting live section
+	 * mappings into page mappings may cause TLB conflicts. This means
+	 * we have to ensure that changing the permission bits of the range
+	 * we are operating on does not result in such splitting.
+	 *
+	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
+	 * Those are guaranteed to consist entirely of page mappings, and
+	 * splitting is never needed.
+	 *
+	 * So check whether the [addr, addr + size) interval is entirely
+	 * covered by precisely one VM area that has the VM_ALLOC flag set.
+	 */
+	area = find_vm_area((void *)addr);
+	if (!area ||
+	    end > (unsigned long)kasan_reset_tag(area->addr) + area->size ||
+	    !(area->flags & VM_ALLOC))
+		return -EINVAL;
+
+	if (!numpages)
+		return 0;
+
+	/*
+	 * If we are manipulating read-only permissions, apply the same
+	 * change to the linear mapping of the pages that back this VM area.
+	 */
+	if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY ||
+			    pgprot_val(clear_mask) == PTE_RDONLY)) {
+		for (i = 0; i < area->nr_pages; i++) {
+			__change_memory_common((u64)page_address(area->pages[i]),
+					       PAGE_SIZE, set_mask, clear_mask);
+		}
+	}
+
+	/*
+	 * Get rid of potentially aliasing lazily unmapped vm areas that may
+	 * have permissions set that deviate from the ones we are setting here.
+	 */
+	vm_unmap_aliases();
+
+	return __change_memory_common(start, size, set_mask, clear_mask);
+}
+
+int set_memory_ro(unsigned long addr, int numpages)
+{
+	return change_memory_common(addr, numpages,
+					__pgprot(PTE_RDONLY),
+					__pgprot(PTE_WRITE));
+}
+
+int set_memory_rw(unsigned long addr, int numpages)
+{
+	return change_memory_common(addr, numpages,
+					__pgprot(PTE_WRITE),
+					__pgprot(PTE_RDONLY));
+}
+
+int set_memory_nx(unsigned long addr, int numpages)
+{
+	return change_memory_common(addr, numpages,
+					__pgprot(PTE_PXN),
+					__pgprot(PTE_MAYBE_GP));
+}
+
+int set_memory_x(unsigned long addr, int numpages)
+{
+	return change_memory_common(addr, numpages,
+					__pgprot(PTE_MAYBE_GP),
+					__pgprot(PTE_PXN));
+}
+
+int set_memory_valid(unsigned long addr, int numpages, int enable)
+{
+	if (enable)
+		return __change_memory_common(addr, PAGE_SIZE * numpages,
+					__pgprot(PTE_VALID),
+					__pgprot(0));
+	else
+		return __change_memory_common(addr, PAGE_SIZE * numpages,
+					__pgprot(0),
+					__pgprot(PTE_VALID));
+}
+
+int set_direct_map_invalid_noflush(struct page *page)
+{
+	struct page_change_data data = {
+		.set_mask = __pgprot(0),
+		.clear_mask = __pgprot(PTE_VALID),
+	};
+
+	if (!can_set_direct_map())
+		return 0;
+
+	return apply_to_page_range(&init_mm,
+				   (unsigned long)page_address(page),
+				   PAGE_SIZE, change_page_range, &data);
+}
+
+int set_direct_map_default_noflush(struct page *page)
+{
+	struct page_change_data data = {
+		.set_mask = __pgprot(PTE_VALID | PTE_WRITE),
+		.clear_mask = __pgprot(PTE_RDONLY),
+	};
+
+	if (!can_set_direct_map())
+		return 0;
+
+	return apply_to_page_range(&init_mm,
+				   (unsigned long)page_address(page),
+				   PAGE_SIZE, change_page_range, &data);
+}
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+void __kernel_map_pages(struct page *page, int numpages, int enable)
+{
+	if (!can_set_direct_map())
+		return;
+
+	set_memory_valid((unsigned long)page_address(page), numpages, enable);
+}
+#endif /* CONFIG_DEBUG_PAGEALLOC */
+
+/*
+ * This function is used to determine if a linear map page has been marked as
+ * not-valid. Walk the page table and check the PTE_VALID bit.
+ *
+ * Because this is only called on the kernel linear map,  p?d_sect() implies
+ * p?d_present(). When debug_pagealloc is enabled, sections mappings are
+ * disabled.
+ */
+bool kernel_page_present(struct page *page)
+{
+	pgd_t *pgdp;
+	p4d_t *p4dp;
+	pud_t *pudp, pud;
+	pmd_t *pmdp, pmd;
+	pte_t *ptep;
+	unsigned long addr = (unsigned long)page_address(page);
+
+	if (!can_set_direct_map())
+		return true;
+
+	pgdp = pgd_offset_k(addr);
+	if (pgd_none(READ_ONCE(*pgdp)))
+		return false;
+
+	p4dp = p4d_offset(pgdp, addr);
+	if (p4d_none(READ_ONCE(*p4dp)))
+		return false;
+
+	pudp = pud_offset(p4dp, addr);
+	pud = READ_ONCE(*pudp);
+	if (pud_none(pud))
+		return false;
+	if (pud_sect(pud))
+		return true;
+
+	pmdp = pmd_offset(pudp, addr);
+	pmd = READ_ONCE(*pmdp);
+	if (pmd_none(pmd))
+		return false;
+	if (pmd_sect(pmd))
+		return true;
+
+	ptep = pte_offset_kernel(pmdp, addr);
+	return pte_valid(READ_ONCE(*ptep));
+}
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
new file mode 100644
index 000000000..4a64089e5
--- /dev/null
+++ b/arch/arm64/mm/pgd.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PGD allocation/freeing
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/gfp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+
+static struct kmem_cache *pgd_cache __ro_after_init;
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	gfp_t gfp = GFP_PGTABLE_USER;
+
+	if (PGD_SIZE == PAGE_SIZE)
+		return (pgd_t *)__get_free_page(gfp);
+	else
+		return kmem_cache_alloc(pgd_cache, gfp);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	if (PGD_SIZE == PAGE_SIZE)
+		free_page((unsigned long)pgd);
+	else
+		kmem_cache_free(pgd_cache, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+	if (PGD_SIZE == PAGE_SIZE)
+		return;
+
+#ifdef CONFIG_ARM64_PA_BITS_52
+	/*
+	 * With 52-bit physical addresses, the architecture requires the
+	 * top-level table to be aligned to at least 64 bytes.
+	 */
+	BUILD_BUG_ON(PGD_SIZE < 64);
+#endif
+
+	/*
+	 * Naturally aligned pgds required by the architecture.
+	 */
+	pgd_cache = kmem_cache_create("pgd_cache", PGD_SIZE, PGD_SIZE,
+				      SLAB_PANIC, NULL);
+}
diff --git a/arch/arm64/mm/physaddr.c b/arch/arm64/mm/physaddr.c
new file mode 100644
index 000000000..cde44c13d
--- /dev/null
+++ b/arch/arm64/mm/physaddr.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bug.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/mmdebug.h>
+#include <linux/mm.h>
+
+#include <asm/memory.h>
+
+phys_addr_t __virt_to_phys(unsigned long x)
+{
+	WARN(!__is_lm_address(__tag_reset(x)),
+	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
+	      (void *)x,
+	      (void *)x);
+
+	return __virt_to_phys_nodebug(x);
+}
+EXPORT_SYMBOL(__virt_to_phys);
+
+phys_addr_t __phys_addr_symbol(unsigned long x)
+{
+	/*
+	 * This is bounds checking against the kernel image only.
+	 * __pa_symbol should only be used on kernel symbol addresses.
+	 */
+	VIRTUAL_BUG_ON(x < (unsigned long) KERNEL_START ||
+		       x > (unsigned long) KERNEL_END);
+	return __pa_symbol_nodebug(x);
+}
+EXPORT_SYMBOL(__phys_addr_symbol);
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
new file mode 100644
index 000000000..14fdf645e
--- /dev/null
+++ b/arch/arm64/mm/proc.S
@@ -0,0 +1,480 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/mm/proc.S
+ *
+ * Copyright (C) 2001 Deep Blue Solutions Ltd.
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Catalin Marinas <catalin.marinas@arm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/pgtable.h>
+#include <linux/cfi_types.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/asm_pointer_auth.h>
+#include <asm/hwcap.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
+#include <asm/smp.h>
+#include <asm/sysreg.h>
+
+#ifdef CONFIG_ARM64_64K_PAGES
+#define TCR_TG_FLAGS	TCR_TG0_64K | TCR_TG1_64K
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define TCR_TG_FLAGS	TCR_TG0_16K | TCR_TG1_16K
+#else /* CONFIG_ARM64_4K_PAGES */
+#define TCR_TG_FLAGS	TCR_TG0_4K | TCR_TG1_4K
+#endif
+
+#ifdef CONFIG_RANDOMIZE_BASE
+#define TCR_KASLR_FLAGS	TCR_NFD1
+#else
+#define TCR_KASLR_FLAGS	0
+#endif
+
+#define TCR_SMP_FLAGS	TCR_SHARED
+
+/* PTWs cacheable, inner/outer WBWA */
+#define TCR_CACHE_FLAGS	TCR_IRGN_WBWA | TCR_ORGN_WBWA
+
+#ifdef CONFIG_KASAN_SW_TAGS
+#define TCR_KASAN_SW_FLAGS TCR_TBI1 | TCR_TBID1
+#else
+#define TCR_KASAN_SW_FLAGS 0
+#endif
+
+#ifdef CONFIG_KASAN_HW_TAGS
+#define TCR_MTE_FLAGS TCR_TCMA1 | TCR_TBI1 | TCR_TBID1
+#elif defined(CONFIG_ARM64_MTE)
+/*
+ * The mte_zero_clear_page_tags() implementation uses DC GZVA, which relies on
+ * TBI being enabled at EL1.
+ */
+#define TCR_MTE_FLAGS TCR_TBI1 | TCR_TBID1
+#else
+#define TCR_MTE_FLAGS 0
+#endif
+
+/*
+ * Default MAIR_EL1. MT_NORMAL_TAGGED is initially mapped as Normal memory and
+ * changed during mte_cpu_setup to Normal Tagged if the system supports MTE.
+ */
+#define MAIR_EL1_SET							\
+	(MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRnE, MT_DEVICE_nGnRnE) |	\
+	 MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRE, MT_DEVICE_nGnRE) |	\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL_NC, MT_NORMAL_NC) |		\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL) |			\
+	 MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL_TAGGED))
+
+#ifdef CONFIG_CPU_PM
+/**
+ * cpu_do_suspend - save CPU registers context
+ *
+ * x0: virtual address of context pointer
+ *
+ * This must be kept in sync with struct cpu_suspend_ctx in <asm/suspend.h>.
+ */
+SYM_FUNC_START(cpu_do_suspend)
+	mrs	x2, tpidr_el0
+	mrs	x3, tpidrro_el0
+	mrs	x4, contextidr_el1
+	mrs	x5, osdlr_el1
+	mrs	x6, cpacr_el1
+	mrs	x7, tcr_el1
+	mrs	x8, vbar_el1
+	mrs	x9, mdscr_el1
+	mrs	x10, oslsr_el1
+	mrs	x11, sctlr_el1
+	get_this_cpu_offset x12
+	mrs	x13, sp_el0
+	stp	x2, x3, [x0]
+	stp	x4, x5, [x0, #16]
+	stp	x6, x7, [x0, #32]
+	stp	x8, x9, [x0, #48]
+	stp	x10, x11, [x0, #64]
+	stp	x12, x13, [x0, #80]
+	/*
+	 * Save x18 as it may be used as a platform register, e.g. by shadow
+	 * call stack.
+	 */
+	str	x18, [x0, #96]
+	ret
+SYM_FUNC_END(cpu_do_suspend)
+
+/**
+ * cpu_do_resume - restore CPU register context
+ *
+ * x0: Address of context pointer
+ */
+SYM_FUNC_START(cpu_do_resume)
+	ldp	x2, x3, [x0]
+	ldp	x4, x5, [x0, #16]
+	ldp	x6, x8, [x0, #32]
+	ldp	x9, x10, [x0, #48]
+	ldp	x11, x12, [x0, #64]
+	ldp	x13, x14, [x0, #80]
+	/*
+	 * Restore x18, as it may be used as a platform register, and clear
+	 * the buffer to minimize the risk of exposure when used for shadow
+	 * call stack.
+	 */
+	ldr	x18, [x0, #96]
+	str	xzr, [x0, #96]
+	msr	tpidr_el0, x2
+	msr	tpidrro_el0, x3
+	msr	contextidr_el1, x4
+	msr	cpacr_el1, x6
+
+	/* Don't change t0sz here, mask those bits when restoring */
+	mrs	x7, tcr_el1
+	bfi	x8, x7, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
+
+	msr	tcr_el1, x8
+	msr	vbar_el1, x9
+
+	/*
+	 * __cpu_setup() cleared MDSCR_EL1.MDE and friends, before unmasking
+	 * debug exceptions. By restoring MDSCR_EL1 here, we may take a debug
+	 * exception. Mask them until local_daif_restore() in cpu_suspend()
+	 * resets them.
+	 */
+	disable_daif
+	msr	mdscr_el1, x10
+
+	msr	sctlr_el1, x12
+	set_this_cpu_offset x13
+	msr	sp_el0, x14
+	/*
+	 * Restore oslsr_el1 by writing oslar_el1
+	 */
+	msr	osdlr_el1, x5
+	ubfx	x11, x11, #1, #1
+	msr	oslar_el1, x11
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
+	reset_amuserenr_el0 x0			// Disable AMU access from EL0
+
+alternative_if ARM64_HAS_RAS_EXTN
+	msr_s	SYS_DISR_EL1, xzr
+alternative_else_nop_endif
+
+	ptrauth_keys_install_kernel_nosync x14, x1, x2, x3
+	isb
+	ret
+SYM_FUNC_END(cpu_do_resume)
+#endif
+
+	.pushsection ".idmap.text", "a"
+
+.macro	__idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
+	adrp	\tmp1, reserved_pg_dir
+	phys_to_ttbr \tmp2, \tmp1
+	offset_ttbr1 \tmp2, \tmp1
+	msr	ttbr1_el1, \tmp2
+	isb
+	tlbi	vmalle1
+	dsb	nsh
+	isb
+.endm
+
+/*
+ * void idmap_cpu_replace_ttbr1(phys_addr_t ttbr1)
+ *
+ * This is the low-level counterpart to cpu_replace_ttbr1, and should not be
+ * called by anything else. It can only be executed from a TTBR0 mapping.
+ */
+SYM_TYPED_FUNC_START(idmap_cpu_replace_ttbr1)
+	__idmap_cpu_set_reserved_ttbr1 x1, x3
+
+	offset_ttbr1 x0, x3
+	msr	ttbr1_el1, x0
+	isb
+
+	ret
+SYM_FUNC_END(idmap_cpu_replace_ttbr1)
+	.popsection
+
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+
+#define KPTI_NG_PTE_FLAGS	(PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS | PTE_WRITE)
+
+	.pushsection ".idmap.text", "a"
+
+	.macro	kpti_mk_tbl_ng, type, num_entries
+	add	end_\type\()p, cur_\type\()p, #\num_entries * 8
+.Ldo_\type:
+	ldr	\type, [cur_\type\()p]		// Load the entry
+	tbz	\type, #0, .Lnext_\type		// Skip invalid and
+	tbnz	\type, #11, .Lnext_\type	// non-global entries
+	orr	\type, \type, #PTE_NG		// Same bit for blocks and pages
+	str	\type, [cur_\type\()p]		// Update the entry
+	.ifnc	\type, pte
+	tbnz	\type, #1, .Lderef_\type
+	.endif
+.Lnext_\type:
+	add	cur_\type\()p, cur_\type\()p, #8
+	cmp	cur_\type\()p, end_\type\()p
+	b.ne	.Ldo_\type
+	.endm
+
+	/*
+	 * Dereference the current table entry and map it into the temporary
+	 * fixmap slot associated with the current level.
+	 */
+	.macro	kpti_map_pgtbl, type, level
+	str	xzr, [temp_pte, #8 * (\level + 1)]	// break before make
+	dsb	nshst
+	add	pte, temp_pte, #PAGE_SIZE * (\level + 1)
+	lsr	pte, pte, #12
+	tlbi	vaae1, pte
+	dsb	nsh
+	isb
+
+	phys_to_pte pte, cur_\type\()p
+	add	cur_\type\()p, temp_pte, #PAGE_SIZE * (\level + 1)
+	orr	pte, pte, pte_flags
+	str	pte, [temp_pte, #8 * (\level + 1)]
+	dsb	nshst
+	.endm
+
+/*
+ * void __kpti_install_ng_mappings(int cpu, int num_secondaries, phys_addr_t temp_pgd,
+ *				   unsigned long temp_pte_va)
+ *
+ * Called exactly once from stop_machine context by each CPU found during boot.
+ */
+	.pushsection	".data", "aw", %progbits
+SYM_DATA(__idmap_kpti_flag, .long 1)
+	.popsection
+
+SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings)
+	cpu		.req	w0
+	temp_pte	.req	x0
+	num_cpus	.req	w1
+	pte_flags	.req	x1
+	temp_pgd_phys	.req	x2
+	swapper_ttb	.req	x3
+	flag_ptr	.req	x4
+	cur_pgdp	.req	x5
+	end_pgdp	.req	x6
+	pgd		.req	x7
+	cur_pudp	.req	x8
+	end_pudp	.req	x9
+	cur_pmdp	.req	x11
+	end_pmdp	.req	x12
+	cur_ptep	.req	x14
+	end_ptep	.req	x15
+	pte		.req	x16
+	valid		.req	x17
+
+	mov	x5, x3				// preserve temp_pte arg
+	mrs	swapper_ttb, ttbr1_el1
+	adr_l	flag_ptr, __idmap_kpti_flag
+
+	cbnz	cpu, __idmap_kpti_secondary
+
+	/* We're the boot CPU. Wait for the others to catch up */
+	sevl
+1:	wfe
+	ldaxr	w17, [flag_ptr]
+	eor	w17, w17, num_cpus
+	cbnz	w17, 1b
+
+	/* Switch to the temporary page tables on this CPU only */
+	__idmap_cpu_set_reserved_ttbr1 x8, x9
+	offset_ttbr1 temp_pgd_phys, x8
+	msr	ttbr1_el1, temp_pgd_phys
+	isb
+
+	mov	temp_pte, x5
+	mov_q	pte_flags, KPTI_NG_PTE_FLAGS
+
+	/* Everybody is enjoying the idmap, so we can rewrite swapper. */
+	/* PGD */
+	adrp		cur_pgdp, swapper_pg_dir
+	kpti_map_pgtbl	pgd, 0
+	kpti_mk_tbl_ng	pgd, PTRS_PER_PGD
+
+	/* Ensure all the updated entries are visible to secondary CPUs */
+	dsb	ishst
+
+	/* We're done: fire up swapper_pg_dir again */
+	__idmap_cpu_set_reserved_ttbr1 x8, x9
+	msr	ttbr1_el1, swapper_ttb
+	isb
+
+	/* Set the flag to zero to indicate that we're all done */
+	str	wzr, [flag_ptr]
+	ret
+
+.Lderef_pgd:
+	/* PUD */
+	.if		CONFIG_PGTABLE_LEVELS > 3
+	pud		.req	x10
+	pte_to_phys	cur_pudp, pgd
+	kpti_map_pgtbl	pud, 1
+	kpti_mk_tbl_ng	pud, PTRS_PER_PUD
+	b		.Lnext_pgd
+	.else		/* CONFIG_PGTABLE_LEVELS <= 3 */
+	pud		.req	pgd
+	.set		.Lnext_pud, .Lnext_pgd
+	.endif
+
+.Lderef_pud:
+	/* PMD */
+	.if		CONFIG_PGTABLE_LEVELS > 2
+	pmd		.req	x13
+	pte_to_phys	cur_pmdp, pud
+	kpti_map_pgtbl	pmd, 2
+	kpti_mk_tbl_ng	pmd, PTRS_PER_PMD
+	b		.Lnext_pud
+	.else		/* CONFIG_PGTABLE_LEVELS <= 2 */
+	pmd		.req	pgd
+	.set		.Lnext_pmd, .Lnext_pgd
+	.endif
+
+.Lderef_pmd:
+	/* PTE */
+	pte_to_phys	cur_ptep, pmd
+	kpti_map_pgtbl	pte, 3
+	kpti_mk_tbl_ng	pte, PTRS_PER_PTE
+	b		.Lnext_pmd
+
+	.unreq	cpu
+	.unreq	temp_pte
+	.unreq	num_cpus
+	.unreq	pte_flags
+	.unreq	temp_pgd_phys
+	.unreq	cur_pgdp
+	.unreq	end_pgdp
+	.unreq	pgd
+	.unreq	cur_pudp
+	.unreq	end_pudp
+	.unreq	pud
+	.unreq	cur_pmdp
+	.unreq	end_pmdp
+	.unreq	pmd
+	.unreq	cur_ptep
+	.unreq	end_ptep
+	.unreq	pte
+	.unreq	valid
+
+	/* Secondary CPUs end up here */
+__idmap_kpti_secondary:
+	/* Uninstall swapper before surgery begins */
+	__idmap_cpu_set_reserved_ttbr1 x16, x17
+
+	/* Increment the flag to let the boot CPU we're ready */
+1:	ldxr	w16, [flag_ptr]
+	add	w16, w16, #1
+	stxr	w17, w16, [flag_ptr]
+	cbnz	w17, 1b
+
+	/* Wait for the boot CPU to finish messing around with swapper */
+	sevl
+1:	wfe
+	ldxr	w16, [flag_ptr]
+	cbnz	w16, 1b
+
+	/* All done, act like nothing happened */
+	msr	ttbr1_el1, swapper_ttb
+	isb
+	ret
+
+	.unreq	swapper_ttb
+	.unreq	flag_ptr
+SYM_FUNC_END(idmap_kpti_install_ng_mappings)
+	.popsection
+#endif
+
+/*
+ *	__cpu_setup
+ *
+ *	Initialise the processor for turning the MMU on.
+ *
+ * Input:
+ *	x0 - actual number of VA bits (ignored unless VA_BITS > 48)
+ * Output:
+ *	Return in x0 the value of the SCTLR_EL1 register.
+ */
+	.pushsection ".idmap.text", "a"
+SYM_FUNC_START(__cpu_setup)
+	tlbi	vmalle1				// Invalidate local TLB
+	dsb	nsh
+
+	mov	x1, #3 << 20
+	msr	cpacr_el1, x1			// Enable FP/ASIMD
+	mov	x1, #1 << 12			// Reset mdscr_el1 and disable
+	msr	mdscr_el1, x1			// access to the DCC from EL0
+	isb					// Unmask debug exceptions now,
+	enable_dbg				// since this is per-cpu
+	reset_pmuserenr_el0 x1			// Disable PMU access from EL0
+	reset_amuserenr_el0 x1			// Disable AMU access from EL0
+
+	/*
+	 * Default values for VMSA control registers. These will be adjusted
+	 * below depending on detected CPU features.
+	 */
+	mair	.req	x17
+	tcr	.req	x16
+	mov_q	mair, MAIR_EL1_SET
+	mov_q	tcr, TCR_TxSZ(VA_BITS) | TCR_CACHE_FLAGS | TCR_SMP_FLAGS | \
+			TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
+			TCR_TBI0 | TCR_A1 | TCR_KASAN_SW_FLAGS | TCR_MTE_FLAGS
+
+	tcr_clear_errata_bits tcr, x9, x5
+
+#ifdef CONFIG_ARM64_VA_BITS_52
+	sub		x9, xzr, x0
+	add		x9, x9, #64
+	tcr_set_t1sz	tcr, x9
+#else
+	idmap_get_t0sz	x9
+#endif
+	tcr_set_t0sz	tcr, x9
+
+	/*
+	 * Set the IPS bits in TCR_EL1.
+	 */
+	tcr_compute_pa_size tcr, #TCR_IPS_SHIFT, x5, x6
+#ifdef CONFIG_ARM64_HW_AFDBM
+	/*
+	 * Enable hardware update of the Access Flags bit.
+	 * Hardware dirty bit management is enabled later,
+	 * via capabilities.
+	 */
+	mrs	x9, ID_AA64MMFR1_EL1
+	and	x9, x9, ID_AA64MMFR1_EL1_HAFDBS_MASK
+	cbz	x9, 1f
+	orr	tcr, tcr, #TCR_HA		// hardware Access flag update
+1:
+#endif	/* CONFIG_ARM64_HW_AFDBM */
+	msr	mair_el1, mair
+	msr	tcr_el1, tcr
+
+	mrs_s	x1, SYS_ID_AA64MMFR3_EL1
+	ubfx	x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
+	cbz	x1, .Lskip_indirection
+
+	mov_q	x0, PIE_E0
+	msr	REG_PIRE0_EL1, x0
+	mov_q	x0, PIE_E1
+	msr	REG_PIR_EL1, x0
+
+	mov	x0, TCR2_EL1x_PIE
+	msr	REG_TCR2_EL1, x0
+
+.Lskip_indirection:
+
+	/*
+	 * Prepare SCTLR
+	 */
+	mov_q	x0, INIT_SCTLR_EL1_MMU_ON
+	ret					// return to head.S
+
+	.unreq	mair
+	.unreq	tcr
+SYM_FUNC_END(__cpu_setup)
diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c
new file mode 100644
index 000000000..e305b6593
--- /dev/null
+++ b/arch/arm64/mm/ptdump.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Debug helper to dump the current kernel pagetables of the system
+ * so that we can see what the various memory ranges are set to.
+ *
+ * Derived from x86 and arm implementation:
+ * (C) Copyright 2008 Intel Corporation
+ *
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ */
+#include <linux/debugfs.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/ptdump.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+
+#include <asm/fixmap.h>
+#include <asm/kasan.h>
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/ptdump.h>
+
+
+enum address_markers_idx {
+	PAGE_OFFSET_NR = 0,
+	PAGE_END_NR,
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+	KASAN_START_NR,
+#endif
+};
+
+static struct addr_marker address_markers[] = {
+	{ PAGE_OFFSET,			"Linear Mapping start" },
+	{ 0 /* PAGE_END */,		"Linear Mapping end" },
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+	{ 0 /* KASAN_SHADOW_START */,	"Kasan shadow start" },
+	{ KASAN_SHADOW_END,		"Kasan shadow end" },
+#endif
+	{ MODULES_VADDR,		"Modules start" },
+	{ MODULES_END,			"Modules end" },
+	{ VMALLOC_START,		"vmalloc() area" },
+	{ VMALLOC_END,			"vmalloc() end" },
+	{ FIXADDR_TOT_START,		"Fixmap start" },
+	{ FIXADDR_TOP,			"Fixmap end" },
+	{ PCI_IO_START,			"PCI I/O start" },
+	{ PCI_IO_END,			"PCI I/O end" },
+	{ VMEMMAP_START,		"vmemmap start" },
+	{ VMEMMAP_START + VMEMMAP_SIZE,	"vmemmap end" },
+	{ -1,				NULL },
+};
+
+#define pt_dump_seq_printf(m, fmt, args...)	\
+({						\
+	if (m)					\
+		seq_printf(m, fmt, ##args);	\
+})
+
+#define pt_dump_seq_puts(m, fmt)	\
+({					\
+	if (m)				\
+		seq_printf(m, fmt);	\
+})
+
+/*
+ * The page dumper groups page table entries of the same type into a single
+ * description. It uses pg_state to track the range information while
+ * iterating over the pte entries. When the continuity is broken it then
+ * dumps out a description of the range.
+ */
+struct pg_state {
+	struct ptdump_state ptdump;
+	struct seq_file *seq;
+	const struct addr_marker *marker;
+	unsigned long start_address;
+	int level;
+	u64 current_prot;
+	bool check_wx;
+	unsigned long wx_pages;
+	unsigned long uxn_pages;
+};
+
+struct prot_bits {
+	u64		mask;
+	u64		val;
+	const char	*set;
+	const char	*clear;
+};
+
+static const struct prot_bits pte_bits[] = {
+	{
+		.mask	= PTE_VALID,
+		.val	= PTE_VALID,
+		.set	= " ",
+		.clear	= "F",
+	}, {
+		.mask	= PTE_USER,
+		.val	= PTE_USER,
+		.set	= "USR",
+		.clear	= "   ",
+	}, {
+		.mask	= PTE_RDONLY,
+		.val	= PTE_RDONLY,
+		.set	= "ro",
+		.clear	= "RW",
+	}, {
+		.mask	= PTE_PXN,
+		.val	= PTE_PXN,
+		.set	= "NX",
+		.clear	= "x ",
+	}, {
+		.mask	= PTE_SHARED,
+		.val	= PTE_SHARED,
+		.set	= "SHD",
+		.clear	= "   ",
+	}, {
+		.mask	= PTE_AF,
+		.val	= PTE_AF,
+		.set	= "AF",
+		.clear	= "  ",
+	}, {
+		.mask	= PTE_NG,
+		.val	= PTE_NG,
+		.set	= "NG",
+		.clear	= "  ",
+	}, {
+		.mask	= PTE_CONT,
+		.val	= PTE_CONT,
+		.set	= "CON",
+		.clear	= "   ",
+	}, {
+		.mask	= PTE_TABLE_BIT,
+		.val	= PTE_TABLE_BIT,
+		.set	= "   ",
+		.clear	= "BLK",
+	}, {
+		.mask	= PTE_UXN,
+		.val	= PTE_UXN,
+		.set	= "UXN",
+		.clear	= "   ",
+	}, {
+		.mask	= PTE_GP,
+		.val	= PTE_GP,
+		.set	= "GP",
+		.clear	= "  ",
+	}, {
+		.mask	= PTE_ATTRINDX_MASK,
+		.val	= PTE_ATTRINDX(MT_DEVICE_nGnRnE),
+		.set	= "DEVICE/nGnRnE",
+	}, {
+		.mask	= PTE_ATTRINDX_MASK,
+		.val	= PTE_ATTRINDX(MT_DEVICE_nGnRE),
+		.set	= "DEVICE/nGnRE",
+	}, {
+		.mask	= PTE_ATTRINDX_MASK,
+		.val	= PTE_ATTRINDX(MT_NORMAL_NC),
+		.set	= "MEM/NORMAL-NC",
+	}, {
+		.mask	= PTE_ATTRINDX_MASK,
+		.val	= PTE_ATTRINDX(MT_NORMAL),
+		.set	= "MEM/NORMAL",
+	}, {
+		.mask	= PTE_ATTRINDX_MASK,
+		.val	= PTE_ATTRINDX(MT_NORMAL_TAGGED),
+		.set	= "MEM/NORMAL-TAGGED",
+	}
+};
+
+struct pg_level {
+	const struct prot_bits *bits;
+	const char *name;
+	size_t num;
+	u64 mask;
+};
+
+static struct pg_level pg_level[] = {
+	{ /* pgd */
+		.name	= "PGD",
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
+	}, { /* p4d */
+		.name	= "P4D",
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
+	}, { /* pud */
+		.name	= (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD",
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
+	}, { /* pmd */
+		.name	= (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD",
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
+	}, { /* pte */
+		.name	= "PTE",
+		.bits	= pte_bits,
+		.num	= ARRAY_SIZE(pte_bits),
+	},
+};
+
+static void dump_prot(struct pg_state *st, const struct prot_bits *bits,
+			size_t num)
+{
+	unsigned i;
+
+	for (i = 0; i < num; i++, bits++) {
+		const char *s;
+
+		if ((st->current_prot & bits->mask) == bits->val)
+			s = bits->set;
+		else
+			s = bits->clear;
+
+		if (s)
+			pt_dump_seq_printf(st->seq, " %s", s);
+	}
+}
+
+static void note_prot_uxn(struct pg_state *st, unsigned long addr)
+{
+	if (!st->check_wx)
+		return;
+
+	if ((st->current_prot & PTE_UXN) == PTE_UXN)
+		return;
+
+	WARN_ONCE(1, "arm64/mm: Found non-UXN mapping at address %p/%pS\n",
+		  (void *)st->start_address, (void *)st->start_address);
+
+	st->uxn_pages += (addr - st->start_address) / PAGE_SIZE;
+}
+
+static void note_prot_wx(struct pg_state *st, unsigned long addr)
+{
+	if (!st->check_wx)
+		return;
+	if ((st->current_prot & PTE_RDONLY) == PTE_RDONLY)
+		return;
+	if ((st->current_prot & PTE_PXN) == PTE_PXN)
+		return;
+
+	WARN_ONCE(1, "arm64/mm: Found insecure W+X mapping at address %p/%pS\n",
+		  (void *)st->start_address, (void *)st->start_address);
+
+	st->wx_pages += (addr - st->start_address) / PAGE_SIZE;
+}
+
+static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
+		      u64 val)
+{
+	struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
+	static const char units[] = "KMGTPE";
+	u64 prot = 0;
+
+	if (level >= 0)
+		prot = val & pg_level[level].mask;
+
+	if (st->level == -1) {
+		st->level = level;
+		st->current_prot = prot;
+		st->start_address = addr;
+		pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+	} else if (prot != st->current_prot || level != st->level ||
+		   addr >= st->marker[1].start_address) {
+		const char *unit = units;
+		unsigned long delta;
+
+		if (st->current_prot) {
+			note_prot_uxn(st, addr);
+			note_prot_wx(st, addr);
+		}
+
+		pt_dump_seq_printf(st->seq, "0x%016lx-0x%016lx   ",
+				   st->start_address, addr);
+
+		delta = (addr - st->start_address) >> 10;
+		while (!(delta & 1023) && unit[1]) {
+			delta >>= 10;
+			unit++;
+		}
+		pt_dump_seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+				   pg_level[st->level].name);
+		if (st->current_prot && pg_level[st->level].bits)
+			dump_prot(st, pg_level[st->level].bits,
+				  pg_level[st->level].num);
+		pt_dump_seq_puts(st->seq, "\n");
+
+		if (addr >= st->marker[1].start_address) {
+			st->marker++;
+			pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+		}
+
+		st->start_address = addr;
+		st->current_prot = prot;
+		st->level = level;
+	}
+
+	if (addr >= st->marker[1].start_address) {
+		st->marker++;
+		pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+	}
+
+}
+
+void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
+{
+	unsigned long end = ~0UL;
+	struct pg_state st;
+
+	if (info->base_addr < TASK_SIZE_64)
+		end = TASK_SIZE_64;
+
+	st = (struct pg_state){
+		.seq = s,
+		.marker = info->markers,
+		.level = -1,
+		.ptdump = {
+			.note_page = note_page,
+			.range = (struct ptdump_range[]){
+				{info->base_addr, end},
+				{0, 0}
+			}
+		}
+	};
+
+	ptdump_walk_pgd(&st.ptdump, info->mm, NULL);
+}
+
+static void __init ptdump_initialize(void)
+{
+	unsigned i, j;
+
+	for (i = 0; i < ARRAY_SIZE(pg_level); i++)
+		if (pg_level[i].bits)
+			for (j = 0; j < pg_level[i].num; j++)
+				pg_level[i].mask |= pg_level[i].bits[j].mask;
+}
+
+static struct ptdump_info kernel_ptdump_info = {
+	.mm		= &init_mm,
+	.markers	= address_markers,
+	.base_addr	= PAGE_OFFSET,
+};
+
+void ptdump_check_wx(void)
+{
+	struct pg_state st = {
+		.seq = NULL,
+		.marker = (struct addr_marker[]) {
+			{ 0, NULL},
+			{ -1, NULL},
+		},
+		.level = -1,
+		.check_wx = true,
+		.ptdump = {
+			.note_page = note_page,
+			.range = (struct ptdump_range[]) {
+				{PAGE_OFFSET, ~0UL},
+				{0, 0}
+			}
+		}
+	};
+
+	ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
+
+	if (st.wx_pages || st.uxn_pages)
+		pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",
+			st.wx_pages, st.uxn_pages);
+	else
+		pr_info("Checked W+X mappings: passed, no W+X pages found\n");
+}
+
+static int __init ptdump_init(void)
+{
+	address_markers[PAGE_END_NR].start_address = PAGE_END;
+#if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS)
+	address_markers[KASAN_START_NR].start_address = KASAN_SHADOW_START;
+#endif
+	ptdump_initialize();
+	ptdump_debugfs_register(&kernel_ptdump_info, "kernel_page_tables");
+	return 0;
+}
+device_initcall(ptdump_init);
diff --git a/arch/arm64/mm/ptdump_debugfs.c b/arch/arm64/mm/ptdump_debugfs.c
new file mode 100644
index 000000000..68bf1a125
--- /dev/null
+++ b/arch/arm64/mm/ptdump_debugfs.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/debugfs.h>
+#include <linux/memory_hotplug.h>
+#include <linux/seq_file.h>
+
+#include <asm/ptdump.h>
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+	struct ptdump_info *info = m->private;
+
+	get_online_mems();
+	ptdump_walk(m, info);
+	put_online_mems();
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(ptdump);
+
+void __init ptdump_debugfs_register(struct ptdump_info *info, const char *name)
+{
+	debugfs_create_file(name, 0400, NULL, info, &ptdump_fops);
+}
diff --git a/arch/arm64/mm/trans_pgd-asm.S b/arch/arm64/mm/trans_pgd-asm.S
new file mode 100644
index 000000000..021c31573
--- /dev/null
+++ b/arch/arm64/mm/trans_pgd-asm.S
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * Copyright (c) 2021, Microsoft Corporation.
+ * Pasha Tatashin <pasha.tatashin@soleen.com>
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/kvm_asm.h>
+
+.macro invalid_vector	label
+SYM_CODE_START_LOCAL(\label)
+	.align 7
+	b	\label
+SYM_CODE_END(\label)
+.endm
+
+.macro el1_sync_vector
+SYM_CODE_START_LOCAL(el1_sync)
+	.align 7
+	cmp	x0, #HVC_SET_VECTORS	/* Called from hibernate */
+	b.ne	1f
+	msr	vbar_el2, x1
+	mov	x0, xzr
+	eret
+1:	cmp	x0, #HVC_SOFT_RESTART	/* Called from kexec */
+	b.ne	2f
+	mov	x0, x2
+	mov	x2, x4
+	mov	x4, x1
+	mov	x1, x3
+	br	x4
+2:	/* Unexpected argument, set an error */
+	mov_q	x0, HVC_STUB_ERR
+	eret
+SYM_CODE_END(el1_sync)
+.endm
+
+SYM_CODE_START(trans_pgd_stub_vectors)
+	invalid_vector	hyp_stub_el2t_sync_invalid	// Synchronous EL2t
+	invalid_vector	hyp_stub_el2t_irq_invalid	// IRQ EL2t
+	invalid_vector	hyp_stub_el2t_fiq_invalid	// FIQ EL2t
+	invalid_vector	hyp_stub_el2t_error_invalid	// Error EL2t
+
+	invalid_vector	hyp_stub_el2h_sync_invalid	// Synchronous EL2h
+	invalid_vector	hyp_stub_el2h_irq_invalid	// IRQ EL2h
+	invalid_vector	hyp_stub_el2h_fiq_invalid	// FIQ EL2h
+	invalid_vector	hyp_stub_el2h_error_invalid	// Error EL2h
+
+	el1_sync_vector					// Synchronous 64-bit EL1
+	invalid_vector	hyp_stub_el1_irq_invalid	// IRQ 64-bit EL1
+	invalid_vector	hyp_stub_el1_fiq_invalid	// FIQ 64-bit EL1
+	invalid_vector	hyp_stub_el1_error_invalid	// Error 64-bit EL1
+
+	invalid_vector	hyp_stub_32b_el1_sync_invalid	// Synchronous 32-bit EL1
+	invalid_vector	hyp_stub_32b_el1_irq_invalid	// IRQ 32-bit EL1
+	invalid_vector	hyp_stub_32b_el1_fiq_invalid	// FIQ 32-bit EL1
+	invalid_vector	hyp_stub_32b_el1_error_invalid	// Error 32-bit EL1
+	.align 11
+SYM_INNER_LABEL(__trans_pgd_stub_vectors_end, SYM_L_LOCAL)
+SYM_CODE_END(trans_pgd_stub_vectors)
+
+# Check the trans_pgd_stub_vectors didn't overflow
+.org . - (__trans_pgd_stub_vectors_end - trans_pgd_stub_vectors) + SZ_2K
diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c
new file mode 100644
index 000000000..7b14df3c6
--- /dev/null
+++ b/arch/arm64/mm/trans_pgd.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Transitional page tables for kexec and hibernate
+ *
+ * This file derived from: arch/arm64/kernel/hibernate.c
+ *
+ * Copyright (c) 2021, Microsoft Corporation.
+ * Pasha Tatashin <pasha.tatashin@soleen.com>
+ *
+ */
+
+/*
+ * Transitional tables are used during system transferring from one world to
+ * another: such as during hibernate restore, and kexec reboots. During these
+ * phases one cannot rely on page table not being overwritten. This is because
+ * hibernate and kexec can overwrite the current page tables during transition.
+ */
+
+#include <asm/trans_pgd.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <linux/suspend.h>
+#include <linux/bug.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/kfence.h>
+
+static void *trans_alloc(struct trans_pgd_info *info)
+{
+	return info->trans_alloc_page(info->trans_alloc_arg);
+}
+
+static void _copy_pte(pte_t *dst_ptep, pte_t *src_ptep, unsigned long addr)
+{
+	pte_t pte = READ_ONCE(*src_ptep);
+
+	if (pte_valid(pte)) {
+		/*
+		 * Resume will overwrite areas that may be marked
+		 * read only (code, rodata). Clear the RDONLY bit from
+		 * the temporary mappings we use during restore.
+		 */
+		set_pte(dst_ptep, pte_mkwrite_novma(pte));
+	} else if ((debug_pagealloc_enabled() ||
+		   is_kfence_address((void *)addr)) && !pte_none(pte)) {
+		/*
+		 * debug_pagealloc will removed the PTE_VALID bit if
+		 * the page isn't in use by the resume kernel. It may have
+		 * been in use by the original kernel, in which case we need
+		 * to put it back in our copy to do the restore.
+		 *
+		 * Before marking this entry valid, check the pfn should
+		 * be mapped.
+		 */
+		BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+		set_pte(dst_ptep, pte_mkpresent(pte_mkwrite_novma(pte)));
+	}
+}
+
+static int copy_pte(struct trans_pgd_info *info, pmd_t *dst_pmdp,
+		    pmd_t *src_pmdp, unsigned long start, unsigned long end)
+{
+	pte_t *src_ptep;
+	pte_t *dst_ptep;
+	unsigned long addr = start;
+
+	dst_ptep = trans_alloc(info);
+	if (!dst_ptep)
+		return -ENOMEM;
+	pmd_populate_kernel(NULL, dst_pmdp, dst_ptep);
+	dst_ptep = pte_offset_kernel(dst_pmdp, start);
+
+	src_ptep = pte_offset_kernel(src_pmdp, start);
+	do {
+		_copy_pte(dst_ptep, src_ptep, addr);
+	} while (dst_ptep++, src_ptep++, addr += PAGE_SIZE, addr != end);
+
+	return 0;
+}
+
+static int copy_pmd(struct trans_pgd_info *info, pud_t *dst_pudp,
+		    pud_t *src_pudp, unsigned long start, unsigned long end)
+{
+	pmd_t *src_pmdp;
+	pmd_t *dst_pmdp;
+	unsigned long next;
+	unsigned long addr = start;
+
+	if (pud_none(READ_ONCE(*dst_pudp))) {
+		dst_pmdp = trans_alloc(info);
+		if (!dst_pmdp)
+			return -ENOMEM;
+		pud_populate(NULL, dst_pudp, dst_pmdp);
+	}
+	dst_pmdp = pmd_offset(dst_pudp, start);
+
+	src_pmdp = pmd_offset(src_pudp, start);
+	do {
+		pmd_t pmd = READ_ONCE(*src_pmdp);
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			continue;
+		if (pmd_table(pmd)) {
+			if (copy_pte(info, dst_pmdp, src_pmdp, addr, next))
+				return -ENOMEM;
+		} else {
+			set_pmd(dst_pmdp,
+				__pmd(pmd_val(pmd) & ~PMD_SECT_RDONLY));
+		}
+	} while (dst_pmdp++, src_pmdp++, addr = next, addr != end);
+
+	return 0;
+}
+
+static int copy_pud(struct trans_pgd_info *info, p4d_t *dst_p4dp,
+		    p4d_t *src_p4dp, unsigned long start,
+		    unsigned long end)
+{
+	pud_t *dst_pudp;
+	pud_t *src_pudp;
+	unsigned long next;
+	unsigned long addr = start;
+
+	if (p4d_none(READ_ONCE(*dst_p4dp))) {
+		dst_pudp = trans_alloc(info);
+		if (!dst_pudp)
+			return -ENOMEM;
+		p4d_populate(NULL, dst_p4dp, dst_pudp);
+	}
+	dst_pudp = pud_offset(dst_p4dp, start);
+
+	src_pudp = pud_offset(src_p4dp, start);
+	do {
+		pud_t pud = READ_ONCE(*src_pudp);
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			continue;
+		if (pud_table(pud)) {
+			if (copy_pmd(info, dst_pudp, src_pudp, addr, next))
+				return -ENOMEM;
+		} else {
+			set_pud(dst_pudp,
+				__pud(pud_val(pud) & ~PUD_SECT_RDONLY));
+		}
+	} while (dst_pudp++, src_pudp++, addr = next, addr != end);
+
+	return 0;
+}
+
+static int copy_p4d(struct trans_pgd_info *info, pgd_t *dst_pgdp,
+		    pgd_t *src_pgdp, unsigned long start,
+		    unsigned long end)
+{
+	p4d_t *dst_p4dp;
+	p4d_t *src_p4dp;
+	unsigned long next;
+	unsigned long addr = start;
+
+	dst_p4dp = p4d_offset(dst_pgdp, start);
+	src_p4dp = p4d_offset(src_pgdp, start);
+	do {
+		next = p4d_addr_end(addr, end);
+		if (p4d_none(READ_ONCE(*src_p4dp)))
+			continue;
+		if (copy_pud(info, dst_p4dp, src_p4dp, addr, next))
+			return -ENOMEM;
+	} while (dst_p4dp++, src_p4dp++, addr = next, addr != end);
+
+	return 0;
+}
+
+static int copy_page_tables(struct trans_pgd_info *info, pgd_t *dst_pgdp,
+			    unsigned long start, unsigned long end)
+{
+	unsigned long next;
+	unsigned long addr = start;
+	pgd_t *src_pgdp = pgd_offset_k(start);
+
+	dst_pgdp = pgd_offset_pgd(dst_pgdp, start);
+	do {
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(READ_ONCE(*src_pgdp)))
+			continue;
+		if (copy_p4d(info, dst_pgdp, src_pgdp, addr, next))
+			return -ENOMEM;
+	} while (dst_pgdp++, src_pgdp++, addr = next, addr != end);
+
+	return 0;
+}
+
+/*
+ * Create trans_pgd and copy linear map.
+ * info:	contains allocator and its argument
+ * dst_pgdp:	new page table that is created, and to which map is copied.
+ * start:	Start of the interval (inclusive).
+ * end:		End of the interval (exclusive).
+ *
+ * Returns 0 on success, and -ENOMEM on failure.
+ */
+int trans_pgd_create_copy(struct trans_pgd_info *info, pgd_t **dst_pgdp,
+			  unsigned long start, unsigned long end)
+{
+	int rc;
+	pgd_t *trans_pgd = trans_alloc(info);
+
+	if (!trans_pgd) {
+		pr_err("Failed to allocate memory for temporary page tables.\n");
+		return -ENOMEM;
+	}
+
+	rc = copy_page_tables(info, trans_pgd, start, end);
+	if (!rc)
+		*dst_pgdp = trans_pgd;
+
+	return rc;
+}
+
+/*
+ * The page we want to idmap may be outside the range covered by VA_BITS that
+ * can be built using the kernel's p?d_populate() helpers. As a one off, for a
+ * single page, we build these page tables bottom up and just assume that will
+ * need the maximum T0SZ.
+ *
+ * Returns 0 on success, and -ENOMEM on failure.
+ * On success trans_ttbr0 contains page table with idmapped page, t0sz is set to
+ * maximum T0SZ for this page.
+ */
+int trans_pgd_idmap_page(struct trans_pgd_info *info, phys_addr_t *trans_ttbr0,
+			 unsigned long *t0sz, void *page)
+{
+	phys_addr_t dst_addr = virt_to_phys(page);
+	unsigned long pfn = __phys_to_pfn(dst_addr);
+	int max_msb = (dst_addr & GENMASK(52, 48)) ? 51 : 47;
+	int bits_mapped = PAGE_SHIFT - 4;
+	unsigned long level_mask, prev_level_entry, *levels[4];
+	int this_level, index, level_lsb, level_msb;
+
+	dst_addr &= PAGE_MASK;
+	prev_level_entry = pte_val(pfn_pte(pfn, PAGE_KERNEL_ROX));
+
+	for (this_level = 3; this_level >= 0; this_level--) {
+		levels[this_level] = trans_alloc(info);
+		if (!levels[this_level])
+			return -ENOMEM;
+
+		level_lsb = ARM64_HW_PGTABLE_LEVEL_SHIFT(this_level);
+		level_msb = min(level_lsb + bits_mapped, max_msb);
+		level_mask = GENMASK_ULL(level_msb, level_lsb);
+
+		index = (dst_addr & level_mask) >> level_lsb;
+		*(levels[this_level] + index) = prev_level_entry;
+
+		pfn = virt_to_pfn(levels[this_level]);
+		prev_level_entry = pte_val(pfn_pte(pfn,
+						   __pgprot(PMD_TYPE_TABLE)));
+
+		if (level_msb == max_msb)
+			break;
+	}
+
+	*trans_ttbr0 = phys_to_ttbr(__pfn_to_phys(pfn));
+	*t0sz = TCR_T0SZ(max_msb + 1);
+
+	return 0;
+}
+
+/*
+ * Create a copy of the vector table so we can call HVC_SET_VECTORS or
+ * HVC_SOFT_RESTART from contexts where the table may be overwritten.
+ */
+int trans_pgd_copy_el2_vectors(struct trans_pgd_info *info,
+			       phys_addr_t *el2_vectors)
+{
+	void *hyp_stub = trans_alloc(info);
+
+	if (!hyp_stub)
+		return -ENOMEM;
+	*el2_vectors = virt_to_phys(hyp_stub);
+	memcpy(hyp_stub, &trans_pgd_stub_vectors, ARM64_VECTOR_TABLE_LEN);
+	caches_clean_inval_pou((unsigned long)hyp_stub,
+			       (unsigned long)hyp_stub +
+			       ARM64_VECTOR_TABLE_LEN);
+	dcache_clean_inval_poc((unsigned long)hyp_stub,
+			       (unsigned long)hyp_stub +
+			       ARM64_VECTOR_TABLE_LEN);
+
+	return 0;
+}
diff --git a/arch/arm64/net/Makefile b/arch/arm64/net/Makefile
new file mode 100644
index 000000000..5c540efb7
--- /dev/null
+++ b/arch/arm64/net/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# ARM64 networking code
+#
+obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h
new file mode 100644
index 000000000..23b1b34db
--- /dev/null
+++ b/arch/arm64/net/bpf_jit.h
@@ -0,0 +1,300 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * BPF JIT compiler for ARM64
+ *
+ * Copyright (C) 2014-2016 Zi Shen Lim <zlim.lnx@gmail.com>
+ */
+#ifndef _BPF_JIT_H
+#define _BPF_JIT_H
+
+#include <asm/insn.h>
+
+/* 5-bit Register Operand */
+#define A64_R(x)	AARCH64_INSN_REG_##x
+#define A64_FP		AARCH64_INSN_REG_FP
+#define A64_LR		AARCH64_INSN_REG_LR
+#define A64_ZR		AARCH64_INSN_REG_ZR
+#define A64_SP		AARCH64_INSN_REG_SP
+
+#define A64_VARIANT(sf) \
+	((sf) ? AARCH64_INSN_VARIANT_64BIT : AARCH64_INSN_VARIANT_32BIT)
+
+/* Compare & branch (immediate) */
+#define A64_COMP_BRANCH(sf, Rt, offset, type) \
+	aarch64_insn_gen_comp_branch_imm(0, offset, Rt, A64_VARIANT(sf), \
+		AARCH64_INSN_BRANCH_COMP_##type)
+#define A64_CBZ(sf, Rt, imm19) A64_COMP_BRANCH(sf, Rt, (imm19) << 2, ZERO)
+#define A64_CBNZ(sf, Rt, imm19) A64_COMP_BRANCH(sf, Rt, (imm19) << 2, NONZERO)
+
+/* Conditional branch (immediate) */
+#define A64_COND_BRANCH(cond, offset) \
+	aarch64_insn_gen_cond_branch_imm(0, offset, cond)
+#define A64_COND_EQ	AARCH64_INSN_COND_EQ /* == */
+#define A64_COND_NE	AARCH64_INSN_COND_NE /* != */
+#define A64_COND_CS	AARCH64_INSN_COND_CS /* unsigned >= */
+#define A64_COND_HI	AARCH64_INSN_COND_HI /* unsigned > */
+#define A64_COND_LS	AARCH64_INSN_COND_LS /* unsigned <= */
+#define A64_COND_CC	AARCH64_INSN_COND_CC /* unsigned < */
+#define A64_COND_GE	AARCH64_INSN_COND_GE /* signed >= */
+#define A64_COND_GT	AARCH64_INSN_COND_GT /* signed > */
+#define A64_COND_LE	AARCH64_INSN_COND_LE /* signed <= */
+#define A64_COND_LT	AARCH64_INSN_COND_LT /* signed < */
+#define A64_B_(cond, imm19) A64_COND_BRANCH(cond, (imm19) << 2)
+
+/* Unconditional branch (immediate) */
+#define A64_BRANCH(offset, type) aarch64_insn_gen_branch_imm(0, offset, \
+	AARCH64_INSN_BRANCH_##type)
+#define A64_B(imm26)  A64_BRANCH((imm26) << 2, NOLINK)
+#define A64_BL(imm26) A64_BRANCH((imm26) << 2, LINK)
+
+/* Unconditional branch (register) */
+#define A64_BR(Rn)  aarch64_insn_gen_branch_reg(Rn, AARCH64_INSN_BRANCH_NOLINK)
+#define A64_BLR(Rn) aarch64_insn_gen_branch_reg(Rn, AARCH64_INSN_BRANCH_LINK)
+#define A64_RET(Rn) aarch64_insn_gen_branch_reg(Rn, AARCH64_INSN_BRANCH_RETURN)
+
+/* Load/store register (register offset) */
+#define A64_LS_REG(Rt, Rn, Rm, size, type) \
+	aarch64_insn_gen_load_store_reg(Rt, Rn, Rm, \
+		AARCH64_INSN_SIZE_##size, \
+		AARCH64_INSN_LDST_##type##_REG_OFFSET)
+#define A64_STRB(Wt, Xn, Xm)  A64_LS_REG(Wt, Xn, Xm, 8, STORE)
+#define A64_LDRB(Wt, Xn, Xm)  A64_LS_REG(Wt, Xn, Xm, 8, LOAD)
+#define A64_LDRSB(Xt, Xn, Xm) A64_LS_REG(Xt, Xn, Xm, 8, SIGNED_LOAD)
+#define A64_STRH(Wt, Xn, Xm)  A64_LS_REG(Wt, Xn, Xm, 16, STORE)
+#define A64_LDRH(Wt, Xn, Xm)  A64_LS_REG(Wt, Xn, Xm, 16, LOAD)
+#define A64_LDRSH(Xt, Xn, Xm) A64_LS_REG(Xt, Xn, Xm, 16, SIGNED_LOAD)
+#define A64_STR32(Wt, Xn, Xm) A64_LS_REG(Wt, Xn, Xm, 32, STORE)
+#define A64_LDR32(Wt, Xn, Xm) A64_LS_REG(Wt, Xn, Xm, 32, LOAD)
+#define A64_LDRSW(Xt, Xn, Xm) A64_LS_REG(Xt, Xn, Xm, 32, SIGNED_LOAD)
+#define A64_STR64(Xt, Xn, Xm) A64_LS_REG(Xt, Xn, Xm, 64, STORE)
+#define A64_LDR64(Xt, Xn, Xm) A64_LS_REG(Xt, Xn, Xm, 64, LOAD)
+
+/* Load/store register (immediate offset) */
+#define A64_LS_IMM(Rt, Rn, imm, size, type) \
+	aarch64_insn_gen_load_store_imm(Rt, Rn, imm, \
+		AARCH64_INSN_SIZE_##size, \
+		AARCH64_INSN_LDST_##type##_IMM_OFFSET)
+#define A64_STRBI(Wt, Xn, imm)  A64_LS_IMM(Wt, Xn, imm, 8, STORE)
+#define A64_LDRBI(Wt, Xn, imm)  A64_LS_IMM(Wt, Xn, imm, 8, LOAD)
+#define A64_LDRSBI(Xt, Xn, imm) A64_LS_IMM(Xt, Xn, imm, 8, SIGNED_LOAD)
+#define A64_STRHI(Wt, Xn, imm)  A64_LS_IMM(Wt, Xn, imm, 16, STORE)
+#define A64_LDRHI(Wt, Xn, imm)  A64_LS_IMM(Wt, Xn, imm, 16, LOAD)
+#define A64_LDRSHI(Xt, Xn, imm) A64_LS_IMM(Xt, Xn, imm, 16, SIGNED_LOAD)
+#define A64_STR32I(Wt, Xn, imm) A64_LS_IMM(Wt, Xn, imm, 32, STORE)
+#define A64_LDR32I(Wt, Xn, imm) A64_LS_IMM(Wt, Xn, imm, 32, LOAD)
+#define A64_LDRSWI(Xt, Xn, imm) A64_LS_IMM(Xt, Xn, imm, 32, SIGNED_LOAD)
+#define A64_STR64I(Xt, Xn, imm) A64_LS_IMM(Xt, Xn, imm, 64, STORE)
+#define A64_LDR64I(Xt, Xn, imm) A64_LS_IMM(Xt, Xn, imm, 64, LOAD)
+
+/* LDR (literal) */
+#define A64_LDR32LIT(Wt, offset) \
+	aarch64_insn_gen_load_literal(0, offset, Wt, false)
+#define A64_LDR64LIT(Xt, offset) \
+	aarch64_insn_gen_load_literal(0, offset, Xt, true)
+
+/* Load/store register pair */
+#define A64_LS_PAIR(Rt, Rt2, Rn, offset, ls, type) \
+	aarch64_insn_gen_load_store_pair(Rt, Rt2, Rn, offset, \
+		AARCH64_INSN_VARIANT_64BIT, \
+		AARCH64_INSN_LDST_##ls##_PAIR_##type)
+/* Rn -= 16; Rn[0] = Rt; Rn[8] = Rt2; */
+#define A64_PUSH(Rt, Rt2, Rn) A64_LS_PAIR(Rt, Rt2, Rn, -16, STORE, PRE_INDEX)
+/* Rt = Rn[0]; Rt2 = Rn[8]; Rn += 16; */
+#define A64_POP(Rt, Rt2, Rn)  A64_LS_PAIR(Rt, Rt2, Rn, 16, LOAD, POST_INDEX)
+
+/* Load/store exclusive */
+#define A64_SIZE(sf) \
+	((sf) ? AARCH64_INSN_SIZE_64 : AARCH64_INSN_SIZE_32)
+#define A64_LSX(sf, Rt, Rn, Rs, type) \
+	aarch64_insn_gen_load_store_ex(Rt, Rn, Rs, A64_SIZE(sf), \
+				       AARCH64_INSN_LDST_##type)
+/* Rt = [Rn]; (atomic) */
+#define A64_LDXR(sf, Rt, Rn) \
+	A64_LSX(sf, Rt, Rn, A64_ZR, LOAD_EX)
+/* [Rn] = Rt; (atomic) Rs = [state] */
+#define A64_STXR(sf, Rt, Rn, Rs) \
+	A64_LSX(sf, Rt, Rn, Rs, STORE_EX)
+/* [Rn] = Rt (store release); (atomic) Rs = [state] */
+#define A64_STLXR(sf, Rt, Rn, Rs) \
+	aarch64_insn_gen_load_store_ex(Rt, Rn, Rs, A64_SIZE(sf), \
+				       AARCH64_INSN_LDST_STORE_REL_EX)
+
+/*
+ * LSE atomics
+ *
+ * ST{ADD,CLR,SET,EOR} is simply encoded as an alias for
+ * LDD{ADD,CLR,SET,EOR} with XZR as the destination register.
+ */
+#define A64_ST_OP(sf, Rn, Rs, op) \
+	aarch64_insn_gen_atomic_ld_op(A64_ZR, Rn, Rs, \
+		A64_SIZE(sf), AARCH64_INSN_MEM_ATOMIC_##op, \
+		AARCH64_INSN_MEM_ORDER_NONE)
+/* [Rn] <op>= Rs */
+#define A64_STADD(sf, Rn, Rs) A64_ST_OP(sf, Rn, Rs, ADD)
+#define A64_STCLR(sf, Rn, Rs) A64_ST_OP(sf, Rn, Rs, CLR)
+#define A64_STEOR(sf, Rn, Rs) A64_ST_OP(sf, Rn, Rs, EOR)
+#define A64_STSET(sf, Rn, Rs) A64_ST_OP(sf, Rn, Rs, SET)
+
+#define A64_LD_OP_AL(sf, Rt, Rn, Rs, op) \
+	aarch64_insn_gen_atomic_ld_op(Rt, Rn, Rs, \
+		A64_SIZE(sf), AARCH64_INSN_MEM_ATOMIC_##op, \
+		AARCH64_INSN_MEM_ORDER_ACQREL)
+/* Rt = [Rn] (load acquire); [Rn] <op>= Rs (store release) */
+#define A64_LDADDAL(sf, Rt, Rn, Rs) A64_LD_OP_AL(sf, Rt, Rn, Rs, ADD)
+#define A64_LDCLRAL(sf, Rt, Rn, Rs) A64_LD_OP_AL(sf, Rt, Rn, Rs, CLR)
+#define A64_LDEORAL(sf, Rt, Rn, Rs) A64_LD_OP_AL(sf, Rt, Rn, Rs, EOR)
+#define A64_LDSETAL(sf, Rt, Rn, Rs) A64_LD_OP_AL(sf, Rt, Rn, Rs, SET)
+/* Rt = [Rn] (load acquire); [Rn] = Rs (store release) */
+#define A64_SWPAL(sf, Rt, Rn, Rs) A64_LD_OP_AL(sf, Rt, Rn, Rs, SWP)
+/* Rs = CAS(Rn, Rs, Rt) (load acquire & store release) */
+#define A64_CASAL(sf, Rt, Rn, Rs) \
+	aarch64_insn_gen_cas(Rt, Rn, Rs, A64_SIZE(sf), \
+		AARCH64_INSN_MEM_ORDER_ACQREL)
+
+/* Add/subtract (immediate) */
+#define A64_ADDSUB_IMM(sf, Rd, Rn, imm12, type) \
+	aarch64_insn_gen_add_sub_imm(Rd, Rn, imm12, \
+		A64_VARIANT(sf), AARCH64_INSN_ADSB_##type)
+/* Rd = Rn OP imm12 */
+#define A64_ADD_I(sf, Rd, Rn, imm12) A64_ADDSUB_IMM(sf, Rd, Rn, imm12, ADD)
+#define A64_SUB_I(sf, Rd, Rn, imm12) A64_ADDSUB_IMM(sf, Rd, Rn, imm12, SUB)
+#define A64_ADDS_I(sf, Rd, Rn, imm12) \
+	A64_ADDSUB_IMM(sf, Rd, Rn, imm12, ADD_SETFLAGS)
+#define A64_SUBS_I(sf, Rd, Rn, imm12) \
+	A64_ADDSUB_IMM(sf, Rd, Rn, imm12, SUB_SETFLAGS)
+/* Rn + imm12; set condition flags */
+#define A64_CMN_I(sf, Rn, imm12) A64_ADDS_I(sf, A64_ZR, Rn, imm12)
+/* Rn - imm12; set condition flags */
+#define A64_CMP_I(sf, Rn, imm12) A64_SUBS_I(sf, A64_ZR, Rn, imm12)
+/* Rd = Rn */
+#define A64_MOV(sf, Rd, Rn) A64_ADD_I(sf, Rd, Rn, 0)
+
+/* Bitfield move */
+#define A64_BITFIELD(sf, Rd, Rn, immr, imms, type) \
+	aarch64_insn_gen_bitfield(Rd, Rn, immr, imms, \
+		A64_VARIANT(sf), AARCH64_INSN_BITFIELD_MOVE_##type)
+/* Signed, with sign replication to left and zeros to right */
+#define A64_SBFM(sf, Rd, Rn, ir, is) A64_BITFIELD(sf, Rd, Rn, ir, is, SIGNED)
+/* Unsigned, with zeros to left and right */
+#define A64_UBFM(sf, Rd, Rn, ir, is) A64_BITFIELD(sf, Rd, Rn, ir, is, UNSIGNED)
+
+/* Rd = Rn << shift */
+#define A64_LSL(sf, Rd, Rn, shift) ({	\
+	int sz = (sf) ? 64 : 32;	\
+	A64_UBFM(sf, Rd, Rn, (unsigned)-(shift) % sz, sz - 1 - (shift)); \
+})
+/* Rd = Rn >> shift */
+#define A64_LSR(sf, Rd, Rn, shift) A64_UBFM(sf, Rd, Rn, shift, (sf) ? 63 : 31)
+/* Rd = Rn >> shift; signed */
+#define A64_ASR(sf, Rd, Rn, shift) A64_SBFM(sf, Rd, Rn, shift, (sf) ? 63 : 31)
+
+/* Zero extend */
+#define A64_UXTH(sf, Rd, Rn) A64_UBFM(sf, Rd, Rn, 0, 15)
+#define A64_UXTW(sf, Rd, Rn) A64_UBFM(sf, Rd, Rn, 0, 31)
+
+/* Sign extend */
+#define A64_SXTB(sf, Rd, Rn) A64_SBFM(sf, Rd, Rn, 0, 7)
+#define A64_SXTH(sf, Rd, Rn) A64_SBFM(sf, Rd, Rn, 0, 15)
+#define A64_SXTW(sf, Rd, Rn) A64_SBFM(sf, Rd, Rn, 0, 31)
+
+/* Move wide (immediate) */
+#define A64_MOVEW(sf, Rd, imm16, shift, type) \
+	aarch64_insn_gen_movewide(Rd, imm16, shift, \
+		A64_VARIANT(sf), AARCH64_INSN_MOVEWIDE_##type)
+/* Rd = Zeros (for MOVZ);
+ * Rd |= imm16 << shift (where shift is {0, 16, 32, 48});
+ * Rd = ~Rd; (for MOVN); */
+#define A64_MOVN(sf, Rd, imm16, shift) A64_MOVEW(sf, Rd, imm16, shift, INVERSE)
+#define A64_MOVZ(sf, Rd, imm16, shift) A64_MOVEW(sf, Rd, imm16, shift, ZERO)
+#define A64_MOVK(sf, Rd, imm16, shift) A64_MOVEW(sf, Rd, imm16, shift, KEEP)
+
+/* Add/subtract (shifted register) */
+#define A64_ADDSUB_SREG(sf, Rd, Rn, Rm, type) \
+	aarch64_insn_gen_add_sub_shifted_reg(Rd, Rn, Rm, 0, \
+		A64_VARIANT(sf), AARCH64_INSN_ADSB_##type)
+/* Rd = Rn OP Rm */
+#define A64_ADD(sf, Rd, Rn, Rm)  A64_ADDSUB_SREG(sf, Rd, Rn, Rm, ADD)
+#define A64_SUB(sf, Rd, Rn, Rm)  A64_ADDSUB_SREG(sf, Rd, Rn, Rm, SUB)
+#define A64_SUBS(sf, Rd, Rn, Rm) A64_ADDSUB_SREG(sf, Rd, Rn, Rm, SUB_SETFLAGS)
+/* Rd = -Rm */
+#define A64_NEG(sf, Rd, Rm) A64_SUB(sf, Rd, A64_ZR, Rm)
+/* Rn - Rm; set condition flags */
+#define A64_CMP(sf, Rn, Rm) A64_SUBS(sf, A64_ZR, Rn, Rm)
+
+/* Data-processing (1 source) */
+#define A64_DATA1(sf, Rd, Rn, type) aarch64_insn_gen_data1(Rd, Rn, \
+	A64_VARIANT(sf), AARCH64_INSN_DATA1_##type)
+/* Rd = BSWAPx(Rn) */
+#define A64_REV16(sf, Rd, Rn) A64_DATA1(sf, Rd, Rn, REVERSE_16)
+#define A64_REV32(sf, Rd, Rn) A64_DATA1(sf, Rd, Rn, REVERSE_32)
+#define A64_REV64(Rd, Rn)     A64_DATA1(1, Rd, Rn, REVERSE_64)
+
+/* Data-processing (2 source) */
+/* Rd = Rn OP Rm */
+#define A64_DATA2(sf, Rd, Rn, Rm, type) aarch64_insn_gen_data2(Rd, Rn, Rm, \
+	A64_VARIANT(sf), AARCH64_INSN_DATA2_##type)
+#define A64_UDIV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, UDIV)
+#define A64_SDIV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, SDIV)
+#define A64_LSLV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, LSLV)
+#define A64_LSRV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, LSRV)
+#define A64_ASRV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, ASRV)
+
+/* Data-processing (3 source) */
+/* Rd = Ra + Rn * Rm */
+#define A64_MADD(sf, Rd, Ra, Rn, Rm) aarch64_insn_gen_data3(Rd, Ra, Rn, Rm, \
+	A64_VARIANT(sf), AARCH64_INSN_DATA3_MADD)
+/* Rd = Ra - Rn * Rm */
+#define A64_MSUB(sf, Rd, Ra, Rn, Rm) aarch64_insn_gen_data3(Rd, Ra, Rn, Rm, \
+	A64_VARIANT(sf), AARCH64_INSN_DATA3_MSUB)
+/* Rd = Rn * Rm */
+#define A64_MUL(sf, Rd, Rn, Rm) A64_MADD(sf, Rd, A64_ZR, Rn, Rm)
+
+/* Logical (shifted register) */
+#define A64_LOGIC_SREG(sf, Rd, Rn, Rm, type) \
+	aarch64_insn_gen_logical_shifted_reg(Rd, Rn, Rm, 0, \
+		A64_VARIANT(sf), AARCH64_INSN_LOGIC_##type)
+/* Rd = Rn OP Rm */
+#define A64_AND(sf, Rd, Rn, Rm)  A64_LOGIC_SREG(sf, Rd, Rn, Rm, AND)
+#define A64_ORR(sf, Rd, Rn, Rm)  A64_LOGIC_SREG(sf, Rd, Rn, Rm, ORR)
+#define A64_EOR(sf, Rd, Rn, Rm)  A64_LOGIC_SREG(sf, Rd, Rn, Rm, EOR)
+#define A64_ANDS(sf, Rd, Rn, Rm) A64_LOGIC_SREG(sf, Rd, Rn, Rm, AND_SETFLAGS)
+/* Rn & Rm; set condition flags */
+#define A64_TST(sf, Rn, Rm) A64_ANDS(sf, A64_ZR, Rn, Rm)
+/* Rd = ~Rm (alias of ORN with A64_ZR as Rn) */
+#define A64_MVN(sf, Rd, Rm)  \
+	A64_LOGIC_SREG(sf, Rd, A64_ZR, Rm, ORN)
+
+/* Logical (immediate) */
+#define A64_LOGIC_IMM(sf, Rd, Rn, imm, type) ({ \
+	u64 imm64 = (sf) ? (u64)imm : (u64)(u32)imm; \
+	aarch64_insn_gen_logical_immediate(AARCH64_INSN_LOGIC_##type, \
+		A64_VARIANT(sf), Rn, Rd, imm64); \
+})
+/* Rd = Rn OP imm */
+#define A64_AND_I(sf, Rd, Rn, imm) A64_LOGIC_IMM(sf, Rd, Rn, imm, AND)
+#define A64_ORR_I(sf, Rd, Rn, imm) A64_LOGIC_IMM(sf, Rd, Rn, imm, ORR)
+#define A64_EOR_I(sf, Rd, Rn, imm) A64_LOGIC_IMM(sf, Rd, Rn, imm, EOR)
+#define A64_ANDS_I(sf, Rd, Rn, imm) A64_LOGIC_IMM(sf, Rd, Rn, imm, AND_SETFLAGS)
+/* Rn & imm; set condition flags */
+#define A64_TST_I(sf, Rn, imm) A64_ANDS_I(sf, A64_ZR, Rn, imm)
+
+/* HINTs */
+#define A64_HINT(x) aarch64_insn_gen_hint(x)
+
+#define A64_PACIASP A64_HINT(AARCH64_INSN_HINT_PACIASP)
+#define A64_AUTIASP A64_HINT(AARCH64_INSN_HINT_AUTIASP)
+
+/* BTI */
+#define A64_BTI_C  A64_HINT(AARCH64_INSN_HINT_BTIC)
+#define A64_BTI_J  A64_HINT(AARCH64_INSN_HINT_BTIJ)
+#define A64_BTI_JC A64_HINT(AARCH64_INSN_HINT_BTIJC)
+#define A64_NOP    A64_HINT(AARCH64_INSN_HINT_NOP)
+
+/* DMB */
+#define A64_DMB_ISH aarch64_insn_gen_dmb(AARCH64_INSN_MB_ISH)
+
+/* ADR */
+#define A64_ADR(Rd, offset) \
+	aarch64_insn_gen_adr(0, offset, Rd, AARCH64_INSN_ADR_TYPE_ADR)
+
+#endif /* _BPF_JIT_H */
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
new file mode 100644
index 000000000..150d1c654
--- /dev/null
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -0,0 +1,2288 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BPF JIT compiler for ARM64
+ *
+ * Copyright (C) 2014-2016 Zi Shen Lim <zlim.lnx@gmail.com>
+ */
+
+#define pr_fmt(fmt) "bpf_jit: " fmt
+
+#include <linux/bitfield.h>
+#include <linux/bpf.h>
+#include <linux/filter.h>
+#include <linux/memory.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+
+#include <asm/asm-extable.h>
+#include <asm/byteorder.h>
+#include <asm/cacheflush.h>
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/patching.h>
+#include <asm/set_memory.h>
+
+#include "bpf_jit.h"
+
+#define TMP_REG_1 (MAX_BPF_JIT_REG + 0)
+#define TMP_REG_2 (MAX_BPF_JIT_REG + 1)
+#define TCALL_CNT (MAX_BPF_JIT_REG + 2)
+#define TMP_REG_3 (MAX_BPF_JIT_REG + 3)
+#define FP_BOTTOM (MAX_BPF_JIT_REG + 4)
+
+#define check_imm(bits, imm) do {				\
+	if ((((imm) > 0) && ((imm) >> (bits))) ||		\
+	    (((imm) < 0) && (~(imm) >> (bits)))) {		\
+		pr_info("[%2d] imm=%d(0x%x) out of range\n",	\
+			i, imm, imm);				\
+		return -EINVAL;					\
+	}							\
+} while (0)
+#define check_imm19(imm) check_imm(19, imm)
+#define check_imm26(imm) check_imm(26, imm)
+
+/* Map BPF registers to A64 registers */
+static const int bpf2a64[] = {
+	/* return value from in-kernel function, and exit value from eBPF */
+	[BPF_REG_0] = A64_R(7),
+	/* arguments from eBPF program to in-kernel function */
+	[BPF_REG_1] = A64_R(0),
+	[BPF_REG_2] = A64_R(1),
+	[BPF_REG_3] = A64_R(2),
+	[BPF_REG_4] = A64_R(3),
+	[BPF_REG_5] = A64_R(4),
+	/* callee saved registers that in-kernel function will preserve */
+	[BPF_REG_6] = A64_R(19),
+	[BPF_REG_7] = A64_R(20),
+	[BPF_REG_8] = A64_R(21),
+	[BPF_REG_9] = A64_R(22),
+	/* read-only frame pointer to access stack */
+	[BPF_REG_FP] = A64_R(25),
+	/* temporary registers for BPF JIT */
+	[TMP_REG_1] = A64_R(10),
+	[TMP_REG_2] = A64_R(11),
+	[TMP_REG_3] = A64_R(12),
+	/* tail_call_cnt */
+	[TCALL_CNT] = A64_R(26),
+	/* temporary register for blinding constants */
+	[BPF_REG_AX] = A64_R(9),
+	[FP_BOTTOM] = A64_R(27),
+};
+
+struct jit_ctx {
+	const struct bpf_prog *prog;
+	int idx;
+	int epilogue_offset;
+	int *offset;
+	int exentry_idx;
+	__le32 *image;
+	u32 stack_size;
+	int fpb_offset;
+};
+
+struct bpf_plt {
+	u32 insn_ldr; /* load target */
+	u32 insn_br;  /* branch to target */
+	u64 target;   /* target value */
+};
+
+#define PLT_TARGET_SIZE   sizeof_field(struct bpf_plt, target)
+#define PLT_TARGET_OFFSET offsetof(struct bpf_plt, target)
+
+static inline void emit(const u32 insn, struct jit_ctx *ctx)
+{
+	if (ctx->image != NULL)
+		ctx->image[ctx->idx] = cpu_to_le32(insn);
+
+	ctx->idx++;
+}
+
+static inline void emit_a64_mov_i(const int is64, const int reg,
+				  const s32 val, struct jit_ctx *ctx)
+{
+	u16 hi = val >> 16;
+	u16 lo = val & 0xffff;
+
+	if (hi & 0x8000) {
+		if (hi == 0xffff) {
+			emit(A64_MOVN(is64, reg, (u16)~lo, 0), ctx);
+		} else {
+			emit(A64_MOVN(is64, reg, (u16)~hi, 16), ctx);
+			if (lo != 0xffff)
+				emit(A64_MOVK(is64, reg, lo, 0), ctx);
+		}
+	} else {
+		emit(A64_MOVZ(is64, reg, lo, 0), ctx);
+		if (hi)
+			emit(A64_MOVK(is64, reg, hi, 16), ctx);
+	}
+}
+
+static int i64_i16_blocks(const u64 val, bool inverse)
+{
+	return (((val >>  0) & 0xffff) != (inverse ? 0xffff : 0x0000)) +
+	       (((val >> 16) & 0xffff) != (inverse ? 0xffff : 0x0000)) +
+	       (((val >> 32) & 0xffff) != (inverse ? 0xffff : 0x0000)) +
+	       (((val >> 48) & 0xffff) != (inverse ? 0xffff : 0x0000));
+}
+
+static inline void emit_a64_mov_i64(const int reg, const u64 val,
+				    struct jit_ctx *ctx)
+{
+	u64 nrm_tmp = val, rev_tmp = ~val;
+	bool inverse;
+	int shift;
+
+	if (!(nrm_tmp >> 32))
+		return emit_a64_mov_i(0, reg, (u32)val, ctx);
+
+	inverse = i64_i16_blocks(nrm_tmp, true) < i64_i16_blocks(nrm_tmp, false);
+	shift = max(round_down((inverse ? (fls64(rev_tmp) - 1) :
+					  (fls64(nrm_tmp) - 1)), 16), 0);
+	if (inverse)
+		emit(A64_MOVN(1, reg, (rev_tmp >> shift) & 0xffff, shift), ctx);
+	else
+		emit(A64_MOVZ(1, reg, (nrm_tmp >> shift) & 0xffff, shift), ctx);
+	shift -= 16;
+	while (shift >= 0) {
+		if (((nrm_tmp >> shift) & 0xffff) != (inverse ? 0xffff : 0x0000))
+			emit(A64_MOVK(1, reg, (nrm_tmp >> shift) & 0xffff, shift), ctx);
+		shift -= 16;
+	}
+}
+
+static inline void emit_bti(u32 insn, struct jit_ctx *ctx)
+{
+	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL))
+		emit(insn, ctx);
+}
+
+/*
+ * Kernel addresses in the vmalloc space use at most 48 bits, and the
+ * remaining bits are guaranteed to be 0x1. So we can compose the address
+ * with a fixed length movn/movk/movk sequence.
+ */
+static inline void emit_addr_mov_i64(const int reg, const u64 val,
+				     struct jit_ctx *ctx)
+{
+	u64 tmp = val;
+	int shift = 0;
+
+	emit(A64_MOVN(1, reg, ~tmp & 0xffff, shift), ctx);
+	while (shift < 32) {
+		tmp >>= 16;
+		shift += 16;
+		emit(A64_MOVK(1, reg, tmp & 0xffff, shift), ctx);
+	}
+}
+
+static inline void emit_call(u64 target, struct jit_ctx *ctx)
+{
+	u8 tmp = bpf2a64[TMP_REG_1];
+
+	emit_addr_mov_i64(tmp, target, ctx);
+	emit(A64_BLR(tmp), ctx);
+}
+
+static inline int bpf2a64_offset(int bpf_insn, int off,
+				 const struct jit_ctx *ctx)
+{
+	/* BPF JMP offset is relative to the next instruction */
+	bpf_insn++;
+	/*
+	 * Whereas arm64 branch instructions encode the offset
+	 * from the branch itself, so we must subtract 1 from the
+	 * instruction offset.
+	 */
+	return ctx->offset[bpf_insn + off] - (ctx->offset[bpf_insn] - 1);
+}
+
+static void jit_fill_hole(void *area, unsigned int size)
+{
+	__le32 *ptr;
+	/* We are guaranteed to have aligned memory. */
+	for (ptr = area; size >= sizeof(u32); size -= sizeof(u32))
+		*ptr++ = cpu_to_le32(AARCH64_BREAK_FAULT);
+}
+
+static inline int epilogue_offset(const struct jit_ctx *ctx)
+{
+	int to = ctx->epilogue_offset;
+	int from = ctx->idx;
+
+	return to - from;
+}
+
+static bool is_addsub_imm(u32 imm)
+{
+	/* Either imm12 or shifted imm12. */
+	return !(imm & ~0xfff) || !(imm & ~0xfff000);
+}
+
+/*
+ * There are 3 types of AArch64 LDR/STR (immediate) instruction:
+ * Post-index, Pre-index, Unsigned offset.
+ *
+ * For BPF ldr/str, the "unsigned offset" type is sufficient.
+ *
+ * "Unsigned offset" type LDR(immediate) format:
+ *
+ *    3                   2                   1                   0
+ *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |x x|1 1 1 0 0 1 0 1|         imm12         |    Rn   |    Rt   |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * scale
+ *
+ * "Unsigned offset" type STR(immediate) format:
+ *    3                   2                   1                   0
+ *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * |x x|1 1 1 0 0 1 0 0|         imm12         |    Rn   |    Rt   |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * scale
+ *
+ * The offset is calculated from imm12 and scale in the following way:
+ *
+ * offset = (u64)imm12 << scale
+ */
+static bool is_lsi_offset(int offset, int scale)
+{
+	if (offset < 0)
+		return false;
+
+	if (offset > (0xFFF << scale))
+		return false;
+
+	if (offset & ((1 << scale) - 1))
+		return false;
+
+	return true;
+}
+
+/* generated prologue:
+ *      bti c // if CONFIG_ARM64_BTI_KERNEL
+ *      mov x9, lr
+ *      nop  // POKE_OFFSET
+ *      paciasp // if CONFIG_ARM64_PTR_AUTH_KERNEL
+ *      stp x29, lr, [sp, #-16]!
+ *      mov x29, sp
+ *      stp x19, x20, [sp, #-16]!
+ *      stp x21, x22, [sp, #-16]!
+ *      stp x25, x26, [sp, #-16]!
+ *      stp x27, x28, [sp, #-16]!
+ *      mov x25, sp
+ *      mov tcc, #0
+ *      // PROLOGUE_OFFSET
+ */
+
+#define BTI_INSNS (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) ? 1 : 0)
+#define PAC_INSNS (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL) ? 1 : 0)
+
+/* Offset of nop instruction in bpf prog entry to be poked */
+#define POKE_OFFSET (BTI_INSNS + 1)
+
+/* Tail call offset to jump into */
+#define PROLOGUE_OFFSET (BTI_INSNS + 2 + PAC_INSNS + 8)
+
+static int build_prologue(struct jit_ctx *ctx, bool ebpf_from_cbpf)
+{
+	const struct bpf_prog *prog = ctx->prog;
+	const bool is_main_prog = prog->aux->func_idx == 0;
+	const u8 r6 = bpf2a64[BPF_REG_6];
+	const u8 r7 = bpf2a64[BPF_REG_7];
+	const u8 r8 = bpf2a64[BPF_REG_8];
+	const u8 r9 = bpf2a64[BPF_REG_9];
+	const u8 fp = bpf2a64[BPF_REG_FP];
+	const u8 tcc = bpf2a64[TCALL_CNT];
+	const u8 fpb = bpf2a64[FP_BOTTOM];
+	const int idx0 = ctx->idx;
+	int cur_offset;
+
+	/*
+	 * BPF prog stack layout
+	 *
+	 *                         high
+	 * original A64_SP =>   0:+-----+ BPF prologue
+	 *                        |FP/LR|
+	 * current A64_FP =>  -16:+-----+
+	 *                        | ... | callee saved registers
+	 * BPF fp register => -64:+-----+ <= (BPF_FP)
+	 *                        |     |
+	 *                        | ... | BPF prog stack
+	 *                        |     |
+	 *                        +-----+ <= (BPF_FP - prog->aux->stack_depth)
+	 *                        |RSVD | padding
+	 * current A64_SP =>      +-----+ <= (BPF_FP - ctx->stack_size)
+	 *                        |     |
+	 *                        | ... | Function call stack
+	 *                        |     |
+	 *                        +-----+
+	 *                          low
+	 *
+	 */
+
+	/* bpf function may be invoked by 3 instruction types:
+	 * 1. bl, attached via freplace to bpf prog via short jump
+	 * 2. br, attached via freplace to bpf prog via long jump
+	 * 3. blr, working as a function pointer, used by emit_call.
+	 * So BTI_JC should used here to support both br and blr.
+	 */
+	emit_bti(A64_BTI_JC, ctx);
+
+	emit(A64_MOV(1, A64_R(9), A64_LR), ctx);
+	emit(A64_NOP, ctx);
+
+	/* Sign lr */
+	if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL))
+		emit(A64_PACIASP, ctx);
+
+	/* Save FP and LR registers to stay align with ARM64 AAPCS */
+	emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx);
+	emit(A64_MOV(1, A64_FP, A64_SP), ctx);
+
+	/* Save callee-saved registers */
+	emit(A64_PUSH(r6, r7, A64_SP), ctx);
+	emit(A64_PUSH(r8, r9, A64_SP), ctx);
+	emit(A64_PUSH(fp, tcc, A64_SP), ctx);
+	emit(A64_PUSH(fpb, A64_R(28), A64_SP), ctx);
+
+	/* Set up BPF prog stack base register */
+	emit(A64_MOV(1, fp, A64_SP), ctx);
+
+	if (!ebpf_from_cbpf && is_main_prog) {
+		/* Initialize tail_call_cnt */
+		emit(A64_MOVZ(1, tcc, 0, 0), ctx);
+
+		cur_offset = ctx->idx - idx0;
+		if (cur_offset != PROLOGUE_OFFSET) {
+			pr_err_once("PROLOGUE_OFFSET = %d, expected %d!\n",
+				    cur_offset, PROLOGUE_OFFSET);
+			return -1;
+		}
+
+		/* BTI landing pad for the tail call, done with a BR */
+		emit_bti(A64_BTI_J, ctx);
+	}
+
+	emit(A64_SUB_I(1, fpb, fp, ctx->fpb_offset), ctx);
+
+	/* Stack must be multiples of 16B */
+	ctx->stack_size = round_up(prog->aux->stack_depth, 16);
+
+	/* Set up function call stack */
+	emit(A64_SUB_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
+	return 0;
+}
+
+static int out_offset = -1; /* initialized on the first pass of build_body() */
+static int emit_bpf_tail_call(struct jit_ctx *ctx)
+{
+	/* bpf_tail_call(void *prog_ctx, struct bpf_array *array, u64 index) */
+	const u8 r2 = bpf2a64[BPF_REG_2];
+	const u8 r3 = bpf2a64[BPF_REG_3];
+
+	const u8 tmp = bpf2a64[TMP_REG_1];
+	const u8 prg = bpf2a64[TMP_REG_2];
+	const u8 tcc = bpf2a64[TCALL_CNT];
+	const int idx0 = ctx->idx;
+#define cur_offset (ctx->idx - idx0)
+#define jmp_offset (out_offset - (cur_offset))
+	size_t off;
+
+	/* if (index >= array->map.max_entries)
+	 *     goto out;
+	 */
+	off = offsetof(struct bpf_array, map.max_entries);
+	emit_a64_mov_i64(tmp, off, ctx);
+	emit(A64_LDR32(tmp, r2, tmp), ctx);
+	emit(A64_MOV(0, r3, r3), ctx);
+	emit(A64_CMP(0, r3, tmp), ctx);
+	emit(A64_B_(A64_COND_CS, jmp_offset), ctx);
+
+	/*
+	 * if (tail_call_cnt >= MAX_TAIL_CALL_CNT)
+	 *     goto out;
+	 * tail_call_cnt++;
+	 */
+	emit_a64_mov_i64(tmp, MAX_TAIL_CALL_CNT, ctx);
+	emit(A64_CMP(1, tcc, tmp), ctx);
+	emit(A64_B_(A64_COND_CS, jmp_offset), ctx);
+	emit(A64_ADD_I(1, tcc, tcc, 1), ctx);
+
+	/* prog = array->ptrs[index];
+	 * if (prog == NULL)
+	 *     goto out;
+	 */
+	off = offsetof(struct bpf_array, ptrs);
+	emit_a64_mov_i64(tmp, off, ctx);
+	emit(A64_ADD(1, tmp, r2, tmp), ctx);
+	emit(A64_LSL(1, prg, r3, 3), ctx);
+	emit(A64_LDR64(prg, tmp, prg), ctx);
+	emit(A64_CBZ(1, prg, jmp_offset), ctx);
+
+	/* goto *(prog->bpf_func + prologue_offset); */
+	off = offsetof(struct bpf_prog, bpf_func);
+	emit_a64_mov_i64(tmp, off, ctx);
+	emit(A64_LDR64(tmp, prg, tmp), ctx);
+	emit(A64_ADD_I(1, tmp, tmp, sizeof(u32) * PROLOGUE_OFFSET), ctx);
+	emit(A64_ADD_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
+	emit(A64_BR(tmp), ctx);
+
+	/* out: */
+	if (out_offset == -1)
+		out_offset = cur_offset;
+	if (cur_offset != out_offset) {
+		pr_err_once("tail_call out_offset = %d, expected %d!\n",
+			    cur_offset, out_offset);
+		return -1;
+	}
+	return 0;
+#undef cur_offset
+#undef jmp_offset
+}
+
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+static int emit_lse_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
+{
+	const u8 code = insn->code;
+	const u8 dst = bpf2a64[insn->dst_reg];
+	const u8 src = bpf2a64[insn->src_reg];
+	const u8 tmp = bpf2a64[TMP_REG_1];
+	const u8 tmp2 = bpf2a64[TMP_REG_2];
+	const bool isdw = BPF_SIZE(code) == BPF_DW;
+	const s16 off = insn->off;
+	u8 reg;
+
+	if (!off) {
+		reg = dst;
+	} else {
+		emit_a64_mov_i(1, tmp, off, ctx);
+		emit(A64_ADD(1, tmp, tmp, dst), ctx);
+		reg = tmp;
+	}
+
+	switch (insn->imm) {
+	/* lock *(u32/u64 *)(dst_reg + off) <op>= src_reg */
+	case BPF_ADD:
+		emit(A64_STADD(isdw, reg, src), ctx);
+		break;
+	case BPF_AND:
+		emit(A64_MVN(isdw, tmp2, src), ctx);
+		emit(A64_STCLR(isdw, reg, tmp2), ctx);
+		break;
+	case BPF_OR:
+		emit(A64_STSET(isdw, reg, src), ctx);
+		break;
+	case BPF_XOR:
+		emit(A64_STEOR(isdw, reg, src), ctx);
+		break;
+	/* src_reg = atomic_fetch_<op>(dst_reg + off, src_reg) */
+	case BPF_ADD | BPF_FETCH:
+		emit(A64_LDADDAL(isdw, src, reg, src), ctx);
+		break;
+	case BPF_AND | BPF_FETCH:
+		emit(A64_MVN(isdw, tmp2, src), ctx);
+		emit(A64_LDCLRAL(isdw, src, reg, tmp2), ctx);
+		break;
+	case BPF_OR | BPF_FETCH:
+		emit(A64_LDSETAL(isdw, src, reg, src), ctx);
+		break;
+	case BPF_XOR | BPF_FETCH:
+		emit(A64_LDEORAL(isdw, src, reg, src), ctx);
+		break;
+	/* src_reg = atomic_xchg(dst_reg + off, src_reg); */
+	case BPF_XCHG:
+		emit(A64_SWPAL(isdw, src, reg, src), ctx);
+		break;
+	/* r0 = atomic_cmpxchg(dst_reg + off, r0, src_reg); */
+	case BPF_CMPXCHG:
+		emit(A64_CASAL(isdw, src, reg, bpf2a64[BPF_REG_0]), ctx);
+		break;
+	default:
+		pr_err_once("unknown atomic op code %02x\n", insn->imm);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+static inline int emit_lse_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
+{
+	return -EINVAL;
+}
+#endif
+
+static int emit_ll_sc_atomic(const struct bpf_insn *insn, struct jit_ctx *ctx)
+{
+	const u8 code = insn->code;
+	const u8 dst = bpf2a64[insn->dst_reg];
+	const u8 src = bpf2a64[insn->src_reg];
+	const u8 tmp = bpf2a64[TMP_REG_1];
+	const u8 tmp2 = bpf2a64[TMP_REG_2];
+	const u8 tmp3 = bpf2a64[TMP_REG_3];
+	const int i = insn - ctx->prog->insnsi;
+	const s32 imm = insn->imm;
+	const s16 off = insn->off;
+	const bool isdw = BPF_SIZE(code) == BPF_DW;
+	u8 reg;
+	s32 jmp_offset;
+
+	if (!off) {
+		reg = dst;
+	} else {
+		emit_a64_mov_i(1, tmp, off, ctx);
+		emit(A64_ADD(1, tmp, tmp, dst), ctx);
+		reg = tmp;
+	}
+
+	if (imm == BPF_ADD || imm == BPF_AND ||
+	    imm == BPF_OR || imm == BPF_XOR) {
+		/* lock *(u32/u64 *)(dst_reg + off) <op>= src_reg */
+		emit(A64_LDXR(isdw, tmp2, reg), ctx);
+		if (imm == BPF_ADD)
+			emit(A64_ADD(isdw, tmp2, tmp2, src), ctx);
+		else if (imm == BPF_AND)
+			emit(A64_AND(isdw, tmp2, tmp2, src), ctx);
+		else if (imm == BPF_OR)
+			emit(A64_ORR(isdw, tmp2, tmp2, src), ctx);
+		else
+			emit(A64_EOR(isdw, tmp2, tmp2, src), ctx);
+		emit(A64_STXR(isdw, tmp2, reg, tmp3), ctx);
+		jmp_offset = -3;
+		check_imm19(jmp_offset);
+		emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
+	} else if (imm == (BPF_ADD | BPF_FETCH) ||
+		   imm == (BPF_AND | BPF_FETCH) ||
+		   imm == (BPF_OR | BPF_FETCH) ||
+		   imm == (BPF_XOR | BPF_FETCH)) {
+		/* src_reg = atomic_fetch_<op>(dst_reg + off, src_reg) */
+		const u8 ax = bpf2a64[BPF_REG_AX];
+
+		emit(A64_MOV(isdw, ax, src), ctx);
+		emit(A64_LDXR(isdw, src, reg), ctx);
+		if (imm == (BPF_ADD | BPF_FETCH))
+			emit(A64_ADD(isdw, tmp2, src, ax), ctx);
+		else if (imm == (BPF_AND | BPF_FETCH))
+			emit(A64_AND(isdw, tmp2, src, ax), ctx);
+		else if (imm == (BPF_OR | BPF_FETCH))
+			emit(A64_ORR(isdw, tmp2, src, ax), ctx);
+		else
+			emit(A64_EOR(isdw, tmp2, src, ax), ctx);
+		emit(A64_STLXR(isdw, tmp2, reg, tmp3), ctx);
+		jmp_offset = -3;
+		check_imm19(jmp_offset);
+		emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
+		emit(A64_DMB_ISH, ctx);
+	} else if (imm == BPF_XCHG) {
+		/* src_reg = atomic_xchg(dst_reg + off, src_reg); */
+		emit(A64_MOV(isdw, tmp2, src), ctx);
+		emit(A64_LDXR(isdw, src, reg), ctx);
+		emit(A64_STLXR(isdw, tmp2, reg, tmp3), ctx);
+		jmp_offset = -2;
+		check_imm19(jmp_offset);
+		emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
+		emit(A64_DMB_ISH, ctx);
+	} else if (imm == BPF_CMPXCHG) {
+		/* r0 = atomic_cmpxchg(dst_reg + off, r0, src_reg); */
+		const u8 r0 = bpf2a64[BPF_REG_0];
+
+		emit(A64_MOV(isdw, tmp2, r0), ctx);
+		emit(A64_LDXR(isdw, r0, reg), ctx);
+		emit(A64_EOR(isdw, tmp3, r0, tmp2), ctx);
+		jmp_offset = 4;
+		check_imm19(jmp_offset);
+		emit(A64_CBNZ(isdw, tmp3, jmp_offset), ctx);
+		emit(A64_STLXR(isdw, src, reg, tmp3), ctx);
+		jmp_offset = -4;
+		check_imm19(jmp_offset);
+		emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
+		emit(A64_DMB_ISH, ctx);
+	} else {
+		pr_err_once("unknown atomic op code %02x\n", imm);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void dummy_tramp(void);
+
+asm (
+"	.pushsection .text, \"ax\", @progbits\n"
+"	.global dummy_tramp\n"
+"	.type dummy_tramp, %function\n"
+"dummy_tramp:"
+#if IS_ENABLED(CONFIG_ARM64_BTI_KERNEL)
+"	bti j\n" /* dummy_tramp is called via "br x10" */
+#endif
+"	mov x10, x30\n"
+"	mov x30, x9\n"
+"	ret x10\n"
+"	.size dummy_tramp, .-dummy_tramp\n"
+"	.popsection\n"
+);
+
+/* build a plt initialized like this:
+ *
+ * plt:
+ *      ldr tmp, target
+ *      br tmp
+ * target:
+ *      .quad dummy_tramp
+ *
+ * when a long jump trampoline is attached, target is filled with the
+ * trampoline address, and when the trampoline is removed, target is
+ * restored to dummy_tramp address.
+ */
+static void build_plt(struct jit_ctx *ctx)
+{
+	const u8 tmp = bpf2a64[TMP_REG_1];
+	struct bpf_plt *plt = NULL;
+
+	/* make sure target is 64-bit aligned */
+	if ((ctx->idx + PLT_TARGET_OFFSET / AARCH64_INSN_SIZE) % 2)
+		emit(A64_NOP, ctx);
+
+	plt = (struct bpf_plt *)(ctx->image + ctx->idx);
+	/* plt is called via bl, no BTI needed here */
+	emit(A64_LDR64LIT(tmp, 2 * AARCH64_INSN_SIZE), ctx);
+	emit(A64_BR(tmp), ctx);
+
+	if (ctx->image)
+		plt->target = (u64)&dummy_tramp;
+}
+
+static void build_epilogue(struct jit_ctx *ctx)
+{
+	const u8 r0 = bpf2a64[BPF_REG_0];
+	const u8 r6 = bpf2a64[BPF_REG_6];
+	const u8 r7 = bpf2a64[BPF_REG_7];
+	const u8 r8 = bpf2a64[BPF_REG_8];
+	const u8 r9 = bpf2a64[BPF_REG_9];
+	const u8 fp = bpf2a64[BPF_REG_FP];
+	const u8 fpb = bpf2a64[FP_BOTTOM];
+
+	/* We're done with BPF stack */
+	emit(A64_ADD_I(1, A64_SP, A64_SP, ctx->stack_size), ctx);
+
+	/* Restore x27 and x28 */
+	emit(A64_POP(fpb, A64_R(28), A64_SP), ctx);
+	/* Restore fs (x25) and x26 */
+	emit(A64_POP(fp, A64_R(26), A64_SP), ctx);
+
+	/* Restore callee-saved register */
+	emit(A64_POP(r8, r9, A64_SP), ctx);
+	emit(A64_POP(r6, r7, A64_SP), ctx);
+
+	/* Restore FP/LR registers */
+	emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx);
+
+	/* Set return value */
+	emit(A64_MOV(1, A64_R(0), r0), ctx);
+
+	/* Authenticate lr */
+	if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH_KERNEL))
+		emit(A64_AUTIASP, ctx);
+
+	emit(A64_RET(A64_LR), ctx);
+}
+
+#define BPF_FIXUP_OFFSET_MASK	GENMASK(26, 0)
+#define BPF_FIXUP_REG_MASK	GENMASK(31, 27)
+
+bool ex_handler_bpf(const struct exception_table_entry *ex,
+		    struct pt_regs *regs)
+{
+	off_t offset = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
+	int dst_reg = FIELD_GET(BPF_FIXUP_REG_MASK, ex->fixup);
+
+	regs->regs[dst_reg] = 0;
+	regs->pc = (unsigned long)&ex->fixup - offset;
+	return true;
+}
+
+/* For accesses to BTF pointers, add an entry to the exception table */
+static int add_exception_handler(const struct bpf_insn *insn,
+				 struct jit_ctx *ctx,
+				 int dst_reg)
+{
+	off_t offset;
+	unsigned long pc;
+	struct exception_table_entry *ex;
+
+	if (!ctx->image)
+		/* First pass */
+		return 0;
+
+	if (BPF_MODE(insn->code) != BPF_PROBE_MEM &&
+		BPF_MODE(insn->code) != BPF_PROBE_MEMSX)
+		return 0;
+
+	if (!ctx->prog->aux->extable ||
+	    WARN_ON_ONCE(ctx->exentry_idx >= ctx->prog->aux->num_exentries))
+		return -EINVAL;
+
+	ex = &ctx->prog->aux->extable[ctx->exentry_idx];
+	pc = (unsigned long)&ctx->image[ctx->idx - 1];
+
+	offset = pc - (long)&ex->insn;
+	if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
+		return -ERANGE;
+	ex->insn = offset;
+
+	/*
+	 * Since the extable follows the program, the fixup offset is always
+	 * negative and limited to BPF_JIT_REGION_SIZE. Store a positive value
+	 * to keep things simple, and put the destination register in the upper
+	 * bits. We don't need to worry about buildtime or runtime sort
+	 * modifying the upper bits because the table is already sorted, and
+	 * isn't part of the main exception table.
+	 */
+	offset = (long)&ex->fixup - (pc + AARCH64_INSN_SIZE);
+	if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, offset))
+		return -ERANGE;
+
+	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, offset) |
+		    FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
+
+	ex->type = EX_TYPE_BPF;
+
+	ctx->exentry_idx++;
+	return 0;
+}
+
+/* JITs an eBPF instruction.
+ * Returns:
+ * 0  - successfully JITed an 8-byte eBPF instruction.
+ * >0 - successfully JITed a 16-byte eBPF instruction.
+ * <0 - failed to JIT.
+ */
+static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+		      bool extra_pass)
+{
+	const u8 code = insn->code;
+	const u8 dst = bpf2a64[insn->dst_reg];
+	const u8 src = bpf2a64[insn->src_reg];
+	const u8 tmp = bpf2a64[TMP_REG_1];
+	const u8 tmp2 = bpf2a64[TMP_REG_2];
+	const u8 fp = bpf2a64[BPF_REG_FP];
+	const u8 fpb = bpf2a64[FP_BOTTOM];
+	const s16 off = insn->off;
+	const s32 imm = insn->imm;
+	const int i = insn - ctx->prog->insnsi;
+	const bool is64 = BPF_CLASS(code) == BPF_ALU64 ||
+			  BPF_CLASS(code) == BPF_JMP;
+	u8 jmp_cond;
+	s32 jmp_offset;
+	u32 a64_insn;
+	u8 src_adj;
+	u8 dst_adj;
+	int off_adj;
+	int ret;
+	bool sign_extend;
+
+	switch (code) {
+	/* dst = src */
+	case BPF_ALU | BPF_MOV | BPF_X:
+	case BPF_ALU64 | BPF_MOV | BPF_X:
+		switch (insn->off) {
+		case 0:
+			emit(A64_MOV(is64, dst, src), ctx);
+			break;
+		case 8:
+			emit(A64_SXTB(is64, dst, src), ctx);
+			break;
+		case 16:
+			emit(A64_SXTH(is64, dst, src), ctx);
+			break;
+		case 32:
+			emit(A64_SXTW(is64, dst, src), ctx);
+			break;
+		}
+		break;
+	/* dst = dst OP src */
+	case BPF_ALU | BPF_ADD | BPF_X:
+	case BPF_ALU64 | BPF_ADD | BPF_X:
+		emit(A64_ADD(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_SUB | BPF_X:
+	case BPF_ALU64 | BPF_SUB | BPF_X:
+		emit(A64_SUB(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_AND | BPF_X:
+	case BPF_ALU64 | BPF_AND | BPF_X:
+		emit(A64_AND(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_OR | BPF_X:
+	case BPF_ALU64 | BPF_OR | BPF_X:
+		emit(A64_ORR(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_XOR | BPF_X:
+	case BPF_ALU64 | BPF_XOR | BPF_X:
+		emit(A64_EOR(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_MUL | BPF_X:
+	case BPF_ALU64 | BPF_MUL | BPF_X:
+		emit(A64_MUL(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_DIV | BPF_X:
+	case BPF_ALU64 | BPF_DIV | BPF_X:
+		if (!off)
+			emit(A64_UDIV(is64, dst, dst, src), ctx);
+		else
+			emit(A64_SDIV(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_MOD | BPF_X:
+	case BPF_ALU64 | BPF_MOD | BPF_X:
+		if (!off)
+			emit(A64_UDIV(is64, tmp, dst, src), ctx);
+		else
+			emit(A64_SDIV(is64, tmp, dst, src), ctx);
+		emit(A64_MSUB(is64, dst, dst, tmp, src), ctx);
+		break;
+	case BPF_ALU | BPF_LSH | BPF_X:
+	case BPF_ALU64 | BPF_LSH | BPF_X:
+		emit(A64_LSLV(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_RSH | BPF_X:
+	case BPF_ALU64 | BPF_RSH | BPF_X:
+		emit(A64_LSRV(is64, dst, dst, src), ctx);
+		break;
+	case BPF_ALU | BPF_ARSH | BPF_X:
+	case BPF_ALU64 | BPF_ARSH | BPF_X:
+		emit(A64_ASRV(is64, dst, dst, src), ctx);
+		break;
+	/* dst = -dst */
+	case BPF_ALU | BPF_NEG:
+	case BPF_ALU64 | BPF_NEG:
+		emit(A64_NEG(is64, dst, dst), ctx);
+		break;
+	/* dst = BSWAP##imm(dst) */
+	case BPF_ALU | BPF_END | BPF_FROM_LE:
+	case BPF_ALU | BPF_END | BPF_FROM_BE:
+	case BPF_ALU64 | BPF_END | BPF_FROM_LE:
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		if (BPF_CLASS(code) == BPF_ALU && BPF_SRC(code) == BPF_FROM_BE)
+			goto emit_bswap_uxt;
+#else /* !CONFIG_CPU_BIG_ENDIAN */
+		if (BPF_CLASS(code) == BPF_ALU && BPF_SRC(code) == BPF_FROM_LE)
+			goto emit_bswap_uxt;
+#endif
+		switch (imm) {
+		case 16:
+			emit(A64_REV16(is64, dst, dst), ctx);
+			/* zero-extend 16 bits into 64 bits */
+			emit(A64_UXTH(is64, dst, dst), ctx);
+			break;
+		case 32:
+			emit(A64_REV32(is64, dst, dst), ctx);
+			/* upper 32 bits already cleared */
+			break;
+		case 64:
+			emit(A64_REV64(dst, dst), ctx);
+			break;
+		}
+		break;
+emit_bswap_uxt:
+		switch (imm) {
+		case 16:
+			/* zero-extend 16 bits into 64 bits */
+			emit(A64_UXTH(is64, dst, dst), ctx);
+			break;
+		case 32:
+			/* zero-extend 32 bits into 64 bits */
+			emit(A64_UXTW(is64, dst, dst), ctx);
+			break;
+		case 64:
+			/* nop */
+			break;
+		}
+		break;
+	/* dst = imm */
+	case BPF_ALU | BPF_MOV | BPF_K:
+	case BPF_ALU64 | BPF_MOV | BPF_K:
+		emit_a64_mov_i(is64, dst, imm, ctx);
+		break;
+	/* dst = dst OP imm */
+	case BPF_ALU | BPF_ADD | BPF_K:
+	case BPF_ALU64 | BPF_ADD | BPF_K:
+		if (is_addsub_imm(imm)) {
+			emit(A64_ADD_I(is64, dst, dst, imm), ctx);
+		} else if (is_addsub_imm(-imm)) {
+			emit(A64_SUB_I(is64, dst, dst, -imm), ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_ADD(is64, dst, dst, tmp), ctx);
+		}
+		break;
+	case BPF_ALU | BPF_SUB | BPF_K:
+	case BPF_ALU64 | BPF_SUB | BPF_K:
+		if (is_addsub_imm(imm)) {
+			emit(A64_SUB_I(is64, dst, dst, imm), ctx);
+		} else if (is_addsub_imm(-imm)) {
+			emit(A64_ADD_I(is64, dst, dst, -imm), ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_SUB(is64, dst, dst, tmp), ctx);
+		}
+		break;
+	case BPF_ALU | BPF_AND | BPF_K:
+	case BPF_ALU64 | BPF_AND | BPF_K:
+		a64_insn = A64_AND_I(is64, dst, dst, imm);
+		if (a64_insn != AARCH64_BREAK_FAULT) {
+			emit(a64_insn, ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_AND(is64, dst, dst, tmp), ctx);
+		}
+		break;
+	case BPF_ALU | BPF_OR | BPF_K:
+	case BPF_ALU64 | BPF_OR | BPF_K:
+		a64_insn = A64_ORR_I(is64, dst, dst, imm);
+		if (a64_insn != AARCH64_BREAK_FAULT) {
+			emit(a64_insn, ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_ORR(is64, dst, dst, tmp), ctx);
+		}
+		break;
+	case BPF_ALU | BPF_XOR | BPF_K:
+	case BPF_ALU64 | BPF_XOR | BPF_K:
+		a64_insn = A64_EOR_I(is64, dst, dst, imm);
+		if (a64_insn != AARCH64_BREAK_FAULT) {
+			emit(a64_insn, ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_EOR(is64, dst, dst, tmp), ctx);
+		}
+		break;
+	case BPF_ALU | BPF_MUL | BPF_K:
+	case BPF_ALU64 | BPF_MUL | BPF_K:
+		emit_a64_mov_i(is64, tmp, imm, ctx);
+		emit(A64_MUL(is64, dst, dst, tmp), ctx);
+		break;
+	case BPF_ALU | BPF_DIV | BPF_K:
+	case BPF_ALU64 | BPF_DIV | BPF_K:
+		emit_a64_mov_i(is64, tmp, imm, ctx);
+		if (!off)
+			emit(A64_UDIV(is64, dst, dst, tmp), ctx);
+		else
+			emit(A64_SDIV(is64, dst, dst, tmp), ctx);
+		break;
+	case BPF_ALU | BPF_MOD | BPF_K:
+	case BPF_ALU64 | BPF_MOD | BPF_K:
+		emit_a64_mov_i(is64, tmp2, imm, ctx);
+		if (!off)
+			emit(A64_UDIV(is64, tmp, dst, tmp2), ctx);
+		else
+			emit(A64_SDIV(is64, tmp, dst, tmp2), ctx);
+		emit(A64_MSUB(is64, dst, dst, tmp, tmp2), ctx);
+		break;
+	case BPF_ALU | BPF_LSH | BPF_K:
+	case BPF_ALU64 | BPF_LSH | BPF_K:
+		emit(A64_LSL(is64, dst, dst, imm), ctx);
+		break;
+	case BPF_ALU | BPF_RSH | BPF_K:
+	case BPF_ALU64 | BPF_RSH | BPF_K:
+		emit(A64_LSR(is64, dst, dst, imm), ctx);
+		break;
+	case BPF_ALU | BPF_ARSH | BPF_K:
+	case BPF_ALU64 | BPF_ARSH | BPF_K:
+		emit(A64_ASR(is64, dst, dst, imm), ctx);
+		break;
+
+	/* JUMP off */
+	case BPF_JMP | BPF_JA:
+	case BPF_JMP32 | BPF_JA:
+		if (BPF_CLASS(code) == BPF_JMP)
+			jmp_offset = bpf2a64_offset(i, off, ctx);
+		else
+			jmp_offset = bpf2a64_offset(i, imm, ctx);
+		check_imm26(jmp_offset);
+		emit(A64_B(jmp_offset), ctx);
+		break;
+	/* IF (dst COND src) JUMP off */
+	case BPF_JMP | BPF_JEQ | BPF_X:
+	case BPF_JMP | BPF_JGT | BPF_X:
+	case BPF_JMP | BPF_JLT | BPF_X:
+	case BPF_JMP | BPF_JGE | BPF_X:
+	case BPF_JMP | BPF_JLE | BPF_X:
+	case BPF_JMP | BPF_JNE | BPF_X:
+	case BPF_JMP | BPF_JSGT | BPF_X:
+	case BPF_JMP | BPF_JSLT | BPF_X:
+	case BPF_JMP | BPF_JSGE | BPF_X:
+	case BPF_JMP | BPF_JSLE | BPF_X:
+	case BPF_JMP32 | BPF_JEQ | BPF_X:
+	case BPF_JMP32 | BPF_JGT | BPF_X:
+	case BPF_JMP32 | BPF_JLT | BPF_X:
+	case BPF_JMP32 | BPF_JGE | BPF_X:
+	case BPF_JMP32 | BPF_JLE | BPF_X:
+	case BPF_JMP32 | BPF_JNE | BPF_X:
+	case BPF_JMP32 | BPF_JSGT | BPF_X:
+	case BPF_JMP32 | BPF_JSLT | BPF_X:
+	case BPF_JMP32 | BPF_JSGE | BPF_X:
+	case BPF_JMP32 | BPF_JSLE | BPF_X:
+		emit(A64_CMP(is64, dst, src), ctx);
+emit_cond_jmp:
+		jmp_offset = bpf2a64_offset(i, off, ctx);
+		check_imm19(jmp_offset);
+		switch (BPF_OP(code)) {
+		case BPF_JEQ:
+			jmp_cond = A64_COND_EQ;
+			break;
+		case BPF_JGT:
+			jmp_cond = A64_COND_HI;
+			break;
+		case BPF_JLT:
+			jmp_cond = A64_COND_CC;
+			break;
+		case BPF_JGE:
+			jmp_cond = A64_COND_CS;
+			break;
+		case BPF_JLE:
+			jmp_cond = A64_COND_LS;
+			break;
+		case BPF_JSET:
+		case BPF_JNE:
+			jmp_cond = A64_COND_NE;
+			break;
+		case BPF_JSGT:
+			jmp_cond = A64_COND_GT;
+			break;
+		case BPF_JSLT:
+			jmp_cond = A64_COND_LT;
+			break;
+		case BPF_JSGE:
+			jmp_cond = A64_COND_GE;
+			break;
+		case BPF_JSLE:
+			jmp_cond = A64_COND_LE;
+			break;
+		default:
+			return -EFAULT;
+		}
+		emit(A64_B_(jmp_cond, jmp_offset), ctx);
+		break;
+	case BPF_JMP | BPF_JSET | BPF_X:
+	case BPF_JMP32 | BPF_JSET | BPF_X:
+		emit(A64_TST(is64, dst, src), ctx);
+		goto emit_cond_jmp;
+	/* IF (dst COND imm) JUMP off */
+	case BPF_JMP | BPF_JEQ | BPF_K:
+	case BPF_JMP | BPF_JGT | BPF_K:
+	case BPF_JMP | BPF_JLT | BPF_K:
+	case BPF_JMP | BPF_JGE | BPF_K:
+	case BPF_JMP | BPF_JLE | BPF_K:
+	case BPF_JMP | BPF_JNE | BPF_K:
+	case BPF_JMP | BPF_JSGT | BPF_K:
+	case BPF_JMP | BPF_JSLT | BPF_K:
+	case BPF_JMP | BPF_JSGE | BPF_K:
+	case BPF_JMP | BPF_JSLE | BPF_K:
+	case BPF_JMP32 | BPF_JEQ | BPF_K:
+	case BPF_JMP32 | BPF_JGT | BPF_K:
+	case BPF_JMP32 | BPF_JLT | BPF_K:
+	case BPF_JMP32 | BPF_JGE | BPF_K:
+	case BPF_JMP32 | BPF_JLE | BPF_K:
+	case BPF_JMP32 | BPF_JNE | BPF_K:
+	case BPF_JMP32 | BPF_JSGT | BPF_K:
+	case BPF_JMP32 | BPF_JSLT | BPF_K:
+	case BPF_JMP32 | BPF_JSGE | BPF_K:
+	case BPF_JMP32 | BPF_JSLE | BPF_K:
+		if (is_addsub_imm(imm)) {
+			emit(A64_CMP_I(is64, dst, imm), ctx);
+		} else if (is_addsub_imm(-imm)) {
+			emit(A64_CMN_I(is64, dst, -imm), ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_CMP(is64, dst, tmp), ctx);
+		}
+		goto emit_cond_jmp;
+	case BPF_JMP | BPF_JSET | BPF_K:
+	case BPF_JMP32 | BPF_JSET | BPF_K:
+		a64_insn = A64_TST_I(is64, dst, imm);
+		if (a64_insn != AARCH64_BREAK_FAULT) {
+			emit(a64_insn, ctx);
+		} else {
+			emit_a64_mov_i(is64, tmp, imm, ctx);
+			emit(A64_TST(is64, dst, tmp), ctx);
+		}
+		goto emit_cond_jmp;
+	/* function call */
+	case BPF_JMP | BPF_CALL:
+	{
+		const u8 r0 = bpf2a64[BPF_REG_0];
+		bool func_addr_fixed;
+		u64 func_addr;
+
+		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass,
+					    &func_addr, &func_addr_fixed);
+		if (ret < 0)
+			return ret;
+		emit_call(func_addr, ctx);
+		emit(A64_MOV(1, r0, A64_R(0)), ctx);
+		break;
+	}
+	/* tail call */
+	case BPF_JMP | BPF_TAIL_CALL:
+		if (emit_bpf_tail_call(ctx))
+			return -EFAULT;
+		break;
+	/* function return */
+	case BPF_JMP | BPF_EXIT:
+		/* Optimization: when last instruction is EXIT,
+		   simply fallthrough to epilogue. */
+		if (i == ctx->prog->len - 1)
+			break;
+		jmp_offset = epilogue_offset(ctx);
+		check_imm26(jmp_offset);
+		emit(A64_B(jmp_offset), ctx);
+		break;
+
+	/* dst = imm64 */
+	case BPF_LD | BPF_IMM | BPF_DW:
+	{
+		const struct bpf_insn insn1 = insn[1];
+		u64 imm64;
+
+		imm64 = (u64)insn1.imm << 32 | (u32)imm;
+		if (bpf_pseudo_func(insn))
+			emit_addr_mov_i64(dst, imm64, ctx);
+		else
+			emit_a64_mov_i64(dst, imm64, ctx);
+
+		return 1;
+	}
+
+	/* LDX: dst = (u64)*(unsigned size *)(src + off) */
+	case BPF_LDX | BPF_MEM | BPF_W:
+	case BPF_LDX | BPF_MEM | BPF_H:
+	case BPF_LDX | BPF_MEM | BPF_B:
+	case BPF_LDX | BPF_MEM | BPF_DW:
+	case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
+	case BPF_LDX | BPF_PROBE_MEM | BPF_W:
+	case BPF_LDX | BPF_PROBE_MEM | BPF_H:
+	case BPF_LDX | BPF_PROBE_MEM | BPF_B:
+	/* LDXS: dst_reg = (s64)*(signed size *)(src_reg + off) */
+	case BPF_LDX | BPF_MEMSX | BPF_B:
+	case BPF_LDX | BPF_MEMSX | BPF_H:
+	case BPF_LDX | BPF_MEMSX | BPF_W:
+	case BPF_LDX | BPF_PROBE_MEMSX | BPF_B:
+	case BPF_LDX | BPF_PROBE_MEMSX | BPF_H:
+	case BPF_LDX | BPF_PROBE_MEMSX | BPF_W:
+		if (ctx->fpb_offset > 0 && src == fp) {
+			src_adj = fpb;
+			off_adj = off + ctx->fpb_offset;
+		} else {
+			src_adj = src;
+			off_adj = off;
+		}
+		sign_extend = (BPF_MODE(insn->code) == BPF_MEMSX ||
+				BPF_MODE(insn->code) == BPF_PROBE_MEMSX);
+		switch (BPF_SIZE(code)) {
+		case BPF_W:
+			if (is_lsi_offset(off_adj, 2)) {
+				if (sign_extend)
+					emit(A64_LDRSWI(dst, src_adj, off_adj), ctx);
+				else
+					emit(A64_LDR32I(dst, src_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				if (sign_extend)
+					emit(A64_LDRSW(dst, src_adj, off_adj), ctx);
+				else
+					emit(A64_LDR32(dst, src, tmp), ctx);
+			}
+			break;
+		case BPF_H:
+			if (is_lsi_offset(off_adj, 1)) {
+				if (sign_extend)
+					emit(A64_LDRSHI(dst, src_adj, off_adj), ctx);
+				else
+					emit(A64_LDRHI(dst, src_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				if (sign_extend)
+					emit(A64_LDRSH(dst, src, tmp), ctx);
+				else
+					emit(A64_LDRH(dst, src, tmp), ctx);
+			}
+			break;
+		case BPF_B:
+			if (is_lsi_offset(off_adj, 0)) {
+				if (sign_extend)
+					emit(A64_LDRSBI(dst, src_adj, off_adj), ctx);
+				else
+					emit(A64_LDRBI(dst, src_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				if (sign_extend)
+					emit(A64_LDRSB(dst, src, tmp), ctx);
+				else
+					emit(A64_LDRB(dst, src, tmp), ctx);
+			}
+			break;
+		case BPF_DW:
+			if (is_lsi_offset(off_adj, 3)) {
+				emit(A64_LDR64I(dst, src_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				emit(A64_LDR64(dst, src, tmp), ctx);
+			}
+			break;
+		}
+
+		ret = add_exception_handler(insn, ctx, dst);
+		if (ret)
+			return ret;
+		break;
+
+	/* speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		/*
+		 * Nothing required here.
+		 *
+		 * In case of arm64, we rely on the firmware mitigation of
+		 * Speculative Store Bypass as controlled via the ssbd kernel
+		 * parameter. Whenever the mitigation is enabled, it works
+		 * for all of the kernel code with no need to provide any
+		 * additional instructions.
+		 */
+		break;
+
+	/* ST: *(size *)(dst + off) = imm */
+	case BPF_ST | BPF_MEM | BPF_W:
+	case BPF_ST | BPF_MEM | BPF_H:
+	case BPF_ST | BPF_MEM | BPF_B:
+	case BPF_ST | BPF_MEM | BPF_DW:
+		if (ctx->fpb_offset > 0 && dst == fp) {
+			dst_adj = fpb;
+			off_adj = off + ctx->fpb_offset;
+		} else {
+			dst_adj = dst;
+			off_adj = off;
+		}
+		/* Load imm to a register then store it */
+		emit_a64_mov_i(1, tmp, imm, ctx);
+		switch (BPF_SIZE(code)) {
+		case BPF_W:
+			if (is_lsi_offset(off_adj, 2)) {
+				emit(A64_STR32I(tmp, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp2, off, ctx);
+				emit(A64_STR32(tmp, dst, tmp2), ctx);
+			}
+			break;
+		case BPF_H:
+			if (is_lsi_offset(off_adj, 1)) {
+				emit(A64_STRHI(tmp, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp2, off, ctx);
+				emit(A64_STRH(tmp, dst, tmp2), ctx);
+			}
+			break;
+		case BPF_B:
+			if (is_lsi_offset(off_adj, 0)) {
+				emit(A64_STRBI(tmp, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp2, off, ctx);
+				emit(A64_STRB(tmp, dst, tmp2), ctx);
+			}
+			break;
+		case BPF_DW:
+			if (is_lsi_offset(off_adj, 3)) {
+				emit(A64_STR64I(tmp, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp2, off, ctx);
+				emit(A64_STR64(tmp, dst, tmp2), ctx);
+			}
+			break;
+		}
+		break;
+
+	/* STX: *(size *)(dst + off) = src */
+	case BPF_STX | BPF_MEM | BPF_W:
+	case BPF_STX | BPF_MEM | BPF_H:
+	case BPF_STX | BPF_MEM | BPF_B:
+	case BPF_STX | BPF_MEM | BPF_DW:
+		if (ctx->fpb_offset > 0 && dst == fp) {
+			dst_adj = fpb;
+			off_adj = off + ctx->fpb_offset;
+		} else {
+			dst_adj = dst;
+			off_adj = off;
+		}
+		switch (BPF_SIZE(code)) {
+		case BPF_W:
+			if (is_lsi_offset(off_adj, 2)) {
+				emit(A64_STR32I(src, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				emit(A64_STR32(src, dst, tmp), ctx);
+			}
+			break;
+		case BPF_H:
+			if (is_lsi_offset(off_adj, 1)) {
+				emit(A64_STRHI(src, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				emit(A64_STRH(src, dst, tmp), ctx);
+			}
+			break;
+		case BPF_B:
+			if (is_lsi_offset(off_adj, 0)) {
+				emit(A64_STRBI(src, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				emit(A64_STRB(src, dst, tmp), ctx);
+			}
+			break;
+		case BPF_DW:
+			if (is_lsi_offset(off_adj, 3)) {
+				emit(A64_STR64I(src, dst_adj, off_adj), ctx);
+			} else {
+				emit_a64_mov_i(1, tmp, off, ctx);
+				emit(A64_STR64(src, dst, tmp), ctx);
+			}
+			break;
+		}
+		break;
+
+	case BPF_STX | BPF_ATOMIC | BPF_W:
+	case BPF_STX | BPF_ATOMIC | BPF_DW:
+		if (cpus_have_cap(ARM64_HAS_LSE_ATOMICS))
+			ret = emit_lse_atomic(insn, ctx);
+		else
+			ret = emit_ll_sc_atomic(insn, ctx);
+		if (ret)
+			return ret;
+		break;
+
+	default:
+		pr_err_once("unknown opcode %02x\n", code);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Return 0 if FP may change at runtime, otherwise find the minimum negative
+ * offset to FP, converts it to positive number, and align down to 8 bytes.
+ */
+static int find_fpb_offset(struct bpf_prog *prog)
+{
+	int i;
+	int offset = 0;
+
+	for (i = 0; i < prog->len; i++) {
+		const struct bpf_insn *insn = &prog->insnsi[i];
+		const u8 class = BPF_CLASS(insn->code);
+		const u8 mode = BPF_MODE(insn->code);
+		const u8 src = insn->src_reg;
+		const u8 dst = insn->dst_reg;
+		const s32 imm = insn->imm;
+		const s16 off = insn->off;
+
+		switch (class) {
+		case BPF_STX:
+		case BPF_ST:
+			/* fp holds atomic operation result */
+			if (class == BPF_STX && mode == BPF_ATOMIC &&
+			    ((imm == BPF_XCHG ||
+			      imm == (BPF_FETCH | BPF_ADD) ||
+			      imm == (BPF_FETCH | BPF_AND) ||
+			      imm == (BPF_FETCH | BPF_XOR) ||
+			      imm == (BPF_FETCH | BPF_OR)) &&
+			     src == BPF_REG_FP))
+				return 0;
+
+			if (mode == BPF_MEM && dst == BPF_REG_FP &&
+			    off < offset)
+				offset = insn->off;
+			break;
+
+		case BPF_JMP32:
+		case BPF_JMP:
+			break;
+
+		case BPF_LDX:
+		case BPF_LD:
+			/* fp holds load result */
+			if (dst == BPF_REG_FP)
+				return 0;
+
+			if (class == BPF_LDX && mode == BPF_MEM &&
+			    src == BPF_REG_FP && off < offset)
+				offset = off;
+			break;
+
+		case BPF_ALU:
+		case BPF_ALU64:
+		default:
+			/* fp holds ALU result */
+			if (dst == BPF_REG_FP)
+				return 0;
+		}
+	}
+
+	if (offset < 0) {
+		/*
+		 * safely be converted to a positive 'int', since insn->off
+		 * is 's16'
+		 */
+		offset = -offset;
+		/* align down to 8 bytes */
+		offset = ALIGN_DOWN(offset, 8);
+	}
+
+	return offset;
+}
+
+static int build_body(struct jit_ctx *ctx, bool extra_pass)
+{
+	const struct bpf_prog *prog = ctx->prog;
+	int i;
+
+	/*
+	 * - offset[0] offset of the end of prologue,
+	 *   start of the 1st instruction.
+	 * - offset[1] - offset of the end of 1st instruction,
+	 *   start of the 2nd instruction
+	 * [....]
+	 * - offset[3] - offset of the end of 3rd instruction,
+	 *   start of 4th instruction
+	 */
+	for (i = 0; i < prog->len; i++) {
+		const struct bpf_insn *insn = &prog->insnsi[i];
+		int ret;
+
+		if (ctx->image == NULL)
+			ctx->offset[i] = ctx->idx;
+		ret = build_insn(insn, ctx, extra_pass);
+		if (ret > 0) {
+			i++;
+			if (ctx->image == NULL)
+				ctx->offset[i] = ctx->idx;
+			continue;
+		}
+		if (ret)
+			return ret;
+	}
+	/*
+	 * offset is allocated with prog->len + 1 so fill in
+	 * the last element with the offset after the last
+	 * instruction (end of program)
+	 */
+	if (ctx->image == NULL)
+		ctx->offset[i] = ctx->idx;
+
+	return 0;
+}
+
+static int validate_code(struct jit_ctx *ctx)
+{
+	int i;
+
+	for (i = 0; i < ctx->idx; i++) {
+		u32 a64_insn = le32_to_cpu(ctx->image[i]);
+
+		if (a64_insn == AARCH64_BREAK_FAULT)
+			return -1;
+	}
+	return 0;
+}
+
+static int validate_ctx(struct jit_ctx *ctx)
+{
+	if (validate_code(ctx))
+		return -1;
+
+	if (WARN_ON_ONCE(ctx->exentry_idx != ctx->prog->aux->num_exentries))
+		return -1;
+
+	return 0;
+}
+
+static inline void bpf_flush_icache(void *start, void *end)
+{
+	flush_icache_range((unsigned long)start, (unsigned long)end);
+}
+
+struct arm64_jit_data {
+	struct bpf_binary_header *header;
+	u8 *image;
+	struct jit_ctx ctx;
+};
+
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
+{
+	int image_size, prog_size, extable_size, extable_align, extable_offset;
+	struct bpf_prog *tmp, *orig_prog = prog;
+	struct bpf_binary_header *header;
+	struct arm64_jit_data *jit_data;
+	bool was_classic = bpf_prog_was_classic(prog);
+	bool tmp_blinded = false;
+	bool extra_pass = false;
+	struct jit_ctx ctx;
+	u8 *image_ptr;
+
+	if (!prog->jit_requested)
+		return orig_prog;
+
+	tmp = bpf_jit_blind_constants(prog);
+	/* If blinding was requested and we failed during blinding,
+	 * we must fall back to the interpreter.
+	 */
+	if (IS_ERR(tmp))
+		return orig_prog;
+	if (tmp != prog) {
+		tmp_blinded = true;
+		prog = tmp;
+	}
+
+	jit_data = prog->aux->jit_data;
+	if (!jit_data) {
+		jit_data = kzalloc(sizeof(*jit_data), GFP_KERNEL);
+		if (!jit_data) {
+			prog = orig_prog;
+			goto out;
+		}
+		prog->aux->jit_data = jit_data;
+	}
+	if (jit_data->ctx.offset) {
+		ctx = jit_data->ctx;
+		image_ptr = jit_data->image;
+		header = jit_data->header;
+		extra_pass = true;
+		prog_size = sizeof(u32) * ctx.idx;
+		goto skip_init_ctx;
+	}
+	memset(&ctx, 0, sizeof(ctx));
+	ctx.prog = prog;
+
+	ctx.offset = kvcalloc(prog->len + 1, sizeof(int), GFP_KERNEL);
+	if (ctx.offset == NULL) {
+		prog = orig_prog;
+		goto out_off;
+	}
+
+	ctx.fpb_offset = find_fpb_offset(prog);
+
+	/*
+	 * 1. Initial fake pass to compute ctx->idx and ctx->offset.
+	 *
+	 * BPF line info needs ctx->offset[i] to be the offset of
+	 * instruction[i] in jited image, so build prologue first.
+	 */
+	if (build_prologue(&ctx, was_classic)) {
+		prog = orig_prog;
+		goto out_off;
+	}
+
+	if (build_body(&ctx, extra_pass)) {
+		prog = orig_prog;
+		goto out_off;
+	}
+
+	ctx.epilogue_offset = ctx.idx;
+	build_epilogue(&ctx);
+	build_plt(&ctx);
+
+	extable_align = __alignof__(struct exception_table_entry);
+	extable_size = prog->aux->num_exentries *
+		sizeof(struct exception_table_entry);
+
+	/* Now we know the actual image size. */
+	prog_size = sizeof(u32) * ctx.idx;
+	/* also allocate space for plt target */
+	extable_offset = round_up(prog_size + PLT_TARGET_SIZE, extable_align);
+	image_size = extable_offset + extable_size;
+	header = bpf_jit_binary_alloc(image_size, &image_ptr,
+				      sizeof(u32), jit_fill_hole);
+	if (header == NULL) {
+		prog = orig_prog;
+		goto out_off;
+	}
+
+	/* 2. Now, the actual pass. */
+
+	ctx.image = (__le32 *)image_ptr;
+	if (extable_size)
+		prog->aux->extable = (void *)image_ptr + extable_offset;
+skip_init_ctx:
+	ctx.idx = 0;
+	ctx.exentry_idx = 0;
+
+	build_prologue(&ctx, was_classic);
+
+	if (build_body(&ctx, extra_pass)) {
+		bpf_jit_binary_free(header);
+		prog = orig_prog;
+		goto out_off;
+	}
+
+	build_epilogue(&ctx);
+	build_plt(&ctx);
+
+	/* 3. Extra pass to validate JITed code. */
+	if (validate_ctx(&ctx)) {
+		bpf_jit_binary_free(header);
+		prog = orig_prog;
+		goto out_off;
+	}
+
+	/* And we're done. */
+	if (bpf_jit_enable > 1)
+		bpf_jit_dump(prog->len, prog_size, 2, ctx.image);
+
+	bpf_flush_icache(header, ctx.image + ctx.idx);
+
+	if (!prog->is_func || extra_pass) {
+		if (extra_pass && ctx.idx != jit_data->ctx.idx) {
+			pr_err_once("multi-func JIT bug %d != %d\n",
+				    ctx.idx, jit_data->ctx.idx);
+			bpf_jit_binary_free(header);
+			prog->bpf_func = NULL;
+			prog->jited = 0;
+			prog->jited_len = 0;
+			goto out_off;
+		}
+		bpf_jit_binary_lock_ro(header);
+	} else {
+		jit_data->ctx = ctx;
+		jit_data->image = image_ptr;
+		jit_data->header = header;
+	}
+	prog->bpf_func = (void *)ctx.image;
+	prog->jited = 1;
+	prog->jited_len = prog_size;
+
+	if (!prog->is_func || extra_pass) {
+		int i;
+
+		/* offset[prog->len] is the size of program */
+		for (i = 0; i <= prog->len; i++)
+			ctx.offset[i] *= AARCH64_INSN_SIZE;
+		bpf_prog_fill_jited_linfo(prog, ctx.offset + 1);
+out_off:
+		kvfree(ctx.offset);
+		kfree(jit_data);
+		prog->aux->jit_data = NULL;
+	}
+out:
+	if (tmp_blinded)
+		bpf_jit_prog_release_other(prog, prog == orig_prog ?
+					   tmp : orig_prog);
+	return prog;
+}
+
+bool bpf_jit_supports_kfunc_call(void)
+{
+	return true;
+}
+
+u64 bpf_jit_alloc_exec_limit(void)
+{
+	return VMALLOC_END - VMALLOC_START;
+}
+
+void *bpf_jit_alloc_exec(unsigned long size)
+{
+	/* Memory is intended to be executable, reset the pointer tag. */
+	return kasan_reset_tag(vmalloc(size));
+}
+
+void bpf_jit_free_exec(void *addr)
+{
+	return vfree(addr);
+}
+
+/* Indicate the JIT backend supports mixing bpf2bpf and tailcalls. */
+bool bpf_jit_supports_subprog_tailcalls(void)
+{
+	return true;
+}
+
+static void invoke_bpf_prog(struct jit_ctx *ctx, struct bpf_tramp_link *l,
+			    int args_off, int retval_off, int run_ctx_off,
+			    bool save_ret)
+{
+	__le32 *branch;
+	u64 enter_prog;
+	u64 exit_prog;
+	struct bpf_prog *p = l->link.prog;
+	int cookie_off = offsetof(struct bpf_tramp_run_ctx, bpf_cookie);
+
+	enter_prog = (u64)bpf_trampoline_enter(p);
+	exit_prog = (u64)bpf_trampoline_exit(p);
+
+	if (l->cookie == 0) {
+		/* if cookie is zero, one instruction is enough to store it */
+		emit(A64_STR64I(A64_ZR, A64_SP, run_ctx_off + cookie_off), ctx);
+	} else {
+		emit_a64_mov_i64(A64_R(10), l->cookie, ctx);
+		emit(A64_STR64I(A64_R(10), A64_SP, run_ctx_off + cookie_off),
+		     ctx);
+	}
+
+	/* save p to callee saved register x19 to avoid loading p with mov_i64
+	 * each time.
+	 */
+	emit_addr_mov_i64(A64_R(19), (const u64)p, ctx);
+
+	/* arg1: prog */
+	emit(A64_MOV(1, A64_R(0), A64_R(19)), ctx);
+	/* arg2: &run_ctx */
+	emit(A64_ADD_I(1, A64_R(1), A64_SP, run_ctx_off), ctx);
+
+	emit_call(enter_prog, ctx);
+
+	/* if (__bpf_prog_enter(prog) == 0)
+	 *         goto skip_exec_of_prog;
+	 */
+	branch = ctx->image + ctx->idx;
+	emit(A64_NOP, ctx);
+
+	/* save return value to callee saved register x20 */
+	emit(A64_MOV(1, A64_R(20), A64_R(0)), ctx);
+
+	emit(A64_ADD_I(1, A64_R(0), A64_SP, args_off), ctx);
+	if (!p->jited)
+		emit_addr_mov_i64(A64_R(1), (const u64)p->insnsi, ctx);
+
+	emit_call((const u64)p->bpf_func, ctx);
+
+	if (save_ret)
+		emit(A64_STR64I(A64_R(0), A64_SP, retval_off), ctx);
+
+	if (ctx->image) {
+		int offset = &ctx->image[ctx->idx] - branch;
+		*branch = cpu_to_le32(A64_CBZ(1, A64_R(0), offset));
+	}
+
+	/* arg1: prog */
+	emit(A64_MOV(1, A64_R(0), A64_R(19)), ctx);
+	/* arg2: start time */
+	emit(A64_MOV(1, A64_R(1), A64_R(20)), ctx);
+	/* arg3: &run_ctx */
+	emit(A64_ADD_I(1, A64_R(2), A64_SP, run_ctx_off), ctx);
+
+	emit_call(exit_prog, ctx);
+}
+
+static void invoke_bpf_mod_ret(struct jit_ctx *ctx, struct bpf_tramp_links *tl,
+			       int args_off, int retval_off, int run_ctx_off,
+			       __le32 **branches)
+{
+	int i;
+
+	/* The first fmod_ret program will receive a garbage return value.
+	 * Set this to 0 to avoid confusing the program.
+	 */
+	emit(A64_STR64I(A64_ZR, A64_SP, retval_off), ctx);
+	for (i = 0; i < tl->nr_links; i++) {
+		invoke_bpf_prog(ctx, tl->links[i], args_off, retval_off,
+				run_ctx_off, true);
+		/* if (*(u64 *)(sp + retval_off) !=  0)
+		 *	goto do_fexit;
+		 */
+		emit(A64_LDR64I(A64_R(10), A64_SP, retval_off), ctx);
+		/* Save the location of branch, and generate a nop.
+		 * This nop will be replaced with a cbnz later.
+		 */
+		branches[i] = ctx->image + ctx->idx;
+		emit(A64_NOP, ctx);
+	}
+}
+
+static void save_args(struct jit_ctx *ctx, int args_off, int nregs)
+{
+	int i;
+
+	for (i = 0; i < nregs; i++) {
+		emit(A64_STR64I(i, A64_SP, args_off), ctx);
+		args_off += 8;
+	}
+}
+
+static void restore_args(struct jit_ctx *ctx, int args_off, int nregs)
+{
+	int i;
+
+	for (i = 0; i < nregs; i++) {
+		emit(A64_LDR64I(i, A64_SP, args_off), ctx);
+		args_off += 8;
+	}
+}
+
+/* Based on the x86's implementation of arch_prepare_bpf_trampoline().
+ *
+ * bpf prog and function entry before bpf trampoline hooked:
+ *   mov x9, lr
+ *   nop
+ *
+ * bpf prog and function entry after bpf trampoline hooked:
+ *   mov x9, lr
+ *   bl  <bpf_trampoline or plt>
+ *
+ */
+static int prepare_trampoline(struct jit_ctx *ctx, struct bpf_tramp_image *im,
+			      struct bpf_tramp_links *tlinks, void *orig_call,
+			      int nregs, u32 flags)
+{
+	int i;
+	int stack_size;
+	int retaddr_off;
+	int regs_off;
+	int retval_off;
+	int args_off;
+	int nregs_off;
+	int ip_off;
+	int run_ctx_off;
+	struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY];
+	struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT];
+	struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN];
+	bool save_ret;
+	__le32 **branches = NULL;
+
+	/* trampoline stack layout:
+	 *                  [ parent ip         ]
+	 *                  [ FP                ]
+	 * SP + retaddr_off [ self ip           ]
+	 *                  [ FP                ]
+	 *
+	 *                  [ padding           ] align SP to multiples of 16
+	 *
+	 *                  [ x20               ] callee saved reg x20
+	 * SP + regs_off    [ x19               ] callee saved reg x19
+	 *
+	 * SP + retval_off  [ return value      ] BPF_TRAMP_F_CALL_ORIG or
+	 *                                        BPF_TRAMP_F_RET_FENTRY_RET
+	 *
+	 *                  [ arg reg N         ]
+	 *                  [ ...               ]
+	 * SP + args_off    [ arg reg 1         ]
+	 *
+	 * SP + nregs_off   [ arg regs count    ]
+	 *
+	 * SP + ip_off      [ traced function   ] BPF_TRAMP_F_IP_ARG flag
+	 *
+	 * SP + run_ctx_off [ bpf_tramp_run_ctx ]
+	 */
+
+	stack_size = 0;
+	run_ctx_off = stack_size;
+	/* room for bpf_tramp_run_ctx */
+	stack_size += round_up(sizeof(struct bpf_tramp_run_ctx), 8);
+
+	ip_off = stack_size;
+	/* room for IP address argument */
+	if (flags & BPF_TRAMP_F_IP_ARG)
+		stack_size += 8;
+
+	nregs_off = stack_size;
+	/* room for args count */
+	stack_size += 8;
+
+	args_off = stack_size;
+	/* room for args */
+	stack_size += nregs * 8;
+
+	/* room for return value */
+	retval_off = stack_size;
+	save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET);
+	if (save_ret)
+		stack_size += 8;
+
+	/* room for callee saved registers, currently x19 and x20 are used */
+	regs_off = stack_size;
+	stack_size += 16;
+
+	/* round up to multiples of 16 to avoid SPAlignmentFault */
+	stack_size = round_up(stack_size, 16);
+
+	/* return address locates above FP */
+	retaddr_off = stack_size + 8;
+
+	/* bpf trampoline may be invoked by 3 instruction types:
+	 * 1. bl, attached to bpf prog or kernel function via short jump
+	 * 2. br, attached to bpf prog or kernel function via long jump
+	 * 3. blr, working as a function pointer, used by struct_ops.
+	 * So BTI_JC should used here to support both br and blr.
+	 */
+	emit_bti(A64_BTI_JC, ctx);
+
+	/* frame for parent function */
+	emit(A64_PUSH(A64_FP, A64_R(9), A64_SP), ctx);
+	emit(A64_MOV(1, A64_FP, A64_SP), ctx);
+
+	/* frame for patched function */
+	emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx);
+	emit(A64_MOV(1, A64_FP, A64_SP), ctx);
+
+	/* allocate stack space */
+	emit(A64_SUB_I(1, A64_SP, A64_SP, stack_size), ctx);
+
+	if (flags & BPF_TRAMP_F_IP_ARG) {
+		/* save ip address of the traced function */
+		emit_addr_mov_i64(A64_R(10), (const u64)orig_call, ctx);
+		emit(A64_STR64I(A64_R(10), A64_SP, ip_off), ctx);
+	}
+
+	/* save arg regs count*/
+	emit(A64_MOVZ(1, A64_R(10), nregs, 0), ctx);
+	emit(A64_STR64I(A64_R(10), A64_SP, nregs_off), ctx);
+
+	/* save arg regs */
+	save_args(ctx, args_off, nregs);
+
+	/* save callee saved registers */
+	emit(A64_STR64I(A64_R(19), A64_SP, regs_off), ctx);
+	emit(A64_STR64I(A64_R(20), A64_SP, regs_off + 8), ctx);
+
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		emit_addr_mov_i64(A64_R(0), (const u64)im, ctx);
+		emit_call((const u64)__bpf_tramp_enter, ctx);
+	}
+
+	for (i = 0; i < fentry->nr_links; i++)
+		invoke_bpf_prog(ctx, fentry->links[i], args_off,
+				retval_off, run_ctx_off,
+				flags & BPF_TRAMP_F_RET_FENTRY_RET);
+
+	if (fmod_ret->nr_links) {
+		branches = kcalloc(fmod_ret->nr_links, sizeof(__le32 *),
+				   GFP_KERNEL);
+		if (!branches)
+			return -ENOMEM;
+
+		invoke_bpf_mod_ret(ctx, fmod_ret, args_off, retval_off,
+				   run_ctx_off, branches);
+	}
+
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		restore_args(ctx, args_off, nregs);
+		/* call original func */
+		emit(A64_LDR64I(A64_R(10), A64_SP, retaddr_off), ctx);
+		emit(A64_ADR(A64_LR, AARCH64_INSN_SIZE * 2), ctx);
+		emit(A64_RET(A64_R(10)), ctx);
+		/* store return value */
+		emit(A64_STR64I(A64_R(0), A64_SP, retval_off), ctx);
+		/* reserve a nop for bpf_tramp_image_put */
+		im->ip_after_call = ctx->image + ctx->idx;
+		emit(A64_NOP, ctx);
+	}
+
+	/* update the branches saved in invoke_bpf_mod_ret with cbnz */
+	for (i = 0; i < fmod_ret->nr_links && ctx->image != NULL; i++) {
+		int offset = &ctx->image[ctx->idx] - branches[i];
+		*branches[i] = cpu_to_le32(A64_CBNZ(1, A64_R(10), offset));
+	}
+
+	for (i = 0; i < fexit->nr_links; i++)
+		invoke_bpf_prog(ctx, fexit->links[i], args_off, retval_off,
+				run_ctx_off, false);
+
+	if (flags & BPF_TRAMP_F_CALL_ORIG) {
+		im->ip_epilogue = ctx->image + ctx->idx;
+		emit_addr_mov_i64(A64_R(0), (const u64)im, ctx);
+		emit_call((const u64)__bpf_tramp_exit, ctx);
+	}
+
+	if (flags & BPF_TRAMP_F_RESTORE_REGS)
+		restore_args(ctx, args_off, nregs);
+
+	/* restore callee saved register x19 and x20 */
+	emit(A64_LDR64I(A64_R(19), A64_SP, regs_off), ctx);
+	emit(A64_LDR64I(A64_R(20), A64_SP, regs_off + 8), ctx);
+
+	if (save_ret)
+		emit(A64_LDR64I(A64_R(0), A64_SP, retval_off), ctx);
+
+	/* reset SP  */
+	emit(A64_MOV(1, A64_SP, A64_FP), ctx);
+
+	/* pop frames  */
+	emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx);
+	emit(A64_POP(A64_FP, A64_R(9), A64_SP), ctx);
+
+	if (flags & BPF_TRAMP_F_SKIP_FRAME) {
+		/* skip patched function, return to parent */
+		emit(A64_MOV(1, A64_LR, A64_R(9)), ctx);
+		emit(A64_RET(A64_R(9)), ctx);
+	} else {
+		/* return to patched function */
+		emit(A64_MOV(1, A64_R(10), A64_LR), ctx);
+		emit(A64_MOV(1, A64_LR, A64_R(9)), ctx);
+		emit(A64_RET(A64_R(10)), ctx);
+	}
+
+	if (ctx->image)
+		bpf_flush_icache(ctx->image, ctx->image + ctx->idx);
+
+	kfree(branches);
+
+	return ctx->idx;
+}
+
+int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
+				void *image_end, const struct btf_func_model *m,
+				u32 flags, struct bpf_tramp_links *tlinks,
+				void *orig_call)
+{
+	int i, ret;
+	int nregs = m->nr_args;
+	int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE;
+	struct jit_ctx ctx = {
+		.image = NULL,
+		.idx = 0,
+	};
+
+	/* extra registers needed for struct argument */
+	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
+		/* The arg_size is at most 16 bytes, enforced by the verifier. */
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
+			nregs += (m->arg_size[i] + 7) / 8 - 1;
+	}
+
+	/* the first 8 registers are used for arguments */
+	if (nregs > 8)
+		return -ENOTSUPP;
+
+	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+	if (ret < 0)
+		return ret;
+
+	if (ret > max_insns)
+		return -EFBIG;
+
+	ctx.image = image;
+	ctx.idx = 0;
+
+	jit_fill_hole(image, (unsigned int)(image_end - image));
+	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nregs, flags);
+
+	if (ret > 0 && validate_code(&ctx) < 0)
+		ret = -EINVAL;
+
+	if (ret > 0)
+		ret *= AARCH64_INSN_SIZE;
+
+	return ret;
+}
+
+static bool is_long_jump(void *ip, void *target)
+{
+	long offset;
+
+	/* NULL target means this is a NOP */
+	if (!target)
+		return false;
+
+	offset = (long)target - (long)ip;
+	return offset < -SZ_128M || offset >= SZ_128M;
+}
+
+static int gen_branch_or_nop(enum aarch64_insn_branch_type type, void *ip,
+			     void *addr, void *plt, u32 *insn)
+{
+	void *target;
+
+	if (!addr) {
+		*insn = aarch64_insn_gen_nop();
+		return 0;
+	}
+
+	if (is_long_jump(ip, addr))
+		target = plt;
+	else
+		target = addr;
+
+	*insn = aarch64_insn_gen_branch_imm((unsigned long)ip,
+					    (unsigned long)target,
+					    type);
+
+	return *insn != AARCH64_BREAK_FAULT ? 0 : -EFAULT;
+}
+
+/* Replace the branch instruction from @ip to @old_addr in a bpf prog or a bpf
+ * trampoline with the branch instruction from @ip to @new_addr. If @old_addr
+ * or @new_addr is NULL, the old or new instruction is NOP.
+ *
+ * When @ip is the bpf prog entry, a bpf trampoline is being attached or
+ * detached. Since bpf trampoline and bpf prog are allocated separately with
+ * vmalloc, the address distance may exceed 128MB, the maximum branch range.
+ * So long jump should be handled.
+ *
+ * When a bpf prog is constructed, a plt pointing to empty trampoline
+ * dummy_tramp is placed at the end:
+ *
+ *      bpf_prog:
+ *              mov x9, lr
+ *              nop // patchsite
+ *              ...
+ *              ret
+ *
+ *      plt:
+ *              ldr x10, target
+ *              br x10
+ *      target:
+ *              .quad dummy_tramp // plt target
+ *
+ * This is also the state when no trampoline is attached.
+ *
+ * When a short-jump bpf trampoline is attached, the patchsite is patched
+ * to a bl instruction to the trampoline directly:
+ *
+ *      bpf_prog:
+ *              mov x9, lr
+ *              bl <short-jump bpf trampoline address> // patchsite
+ *              ...
+ *              ret
+ *
+ *      plt:
+ *              ldr x10, target
+ *              br x10
+ *      target:
+ *              .quad dummy_tramp // plt target
+ *
+ * When a long-jump bpf trampoline is attached, the plt target is filled with
+ * the trampoline address and the patchsite is patched to a bl instruction to
+ * the plt:
+ *
+ *      bpf_prog:
+ *              mov x9, lr
+ *              bl plt // patchsite
+ *              ...
+ *              ret
+ *
+ *      plt:
+ *              ldr x10, target
+ *              br x10
+ *      target:
+ *              .quad <long-jump bpf trampoline address> // plt target
+ *
+ * The dummy_tramp is used to prevent another CPU from jumping to unknown
+ * locations during the patching process, making the patching process easier.
+ */
+int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type poke_type,
+		       void *old_addr, void *new_addr)
+{
+	int ret;
+	u32 old_insn;
+	u32 new_insn;
+	u32 replaced;
+	struct bpf_plt *plt = NULL;
+	unsigned long size = 0UL;
+	unsigned long offset = ~0UL;
+	enum aarch64_insn_branch_type branch_type;
+	char namebuf[KSYM_NAME_LEN];
+	void *image = NULL;
+	u64 plt_target = 0ULL;
+	bool poking_bpf_entry;
+
+	if (!__bpf_address_lookup((unsigned long)ip, &size, &offset, namebuf))
+		/* Only poking bpf text is supported. Since kernel function
+		 * entry is set up by ftrace, we reply on ftrace to poke kernel
+		 * functions.
+		 */
+		return -ENOTSUPP;
+
+	image = ip - offset;
+	/* zero offset means we're poking bpf prog entry */
+	poking_bpf_entry = (offset == 0UL);
+
+	/* bpf prog entry, find plt and the real patchsite */
+	if (poking_bpf_entry) {
+		/* plt locates at the end of bpf prog */
+		plt = image + size - PLT_TARGET_OFFSET;
+
+		/* skip to the nop instruction in bpf prog entry:
+		 * bti c // if BTI enabled
+		 * mov x9, x30
+		 * nop
+		 */
+		ip = image + POKE_OFFSET * AARCH64_INSN_SIZE;
+	}
+
+	/* long jump is only possible at bpf prog entry */
+	if (WARN_ON((is_long_jump(ip, new_addr) || is_long_jump(ip, old_addr)) &&
+		    !poking_bpf_entry))
+		return -EINVAL;
+
+	if (poke_type == BPF_MOD_CALL)
+		branch_type = AARCH64_INSN_BRANCH_LINK;
+	else
+		branch_type = AARCH64_INSN_BRANCH_NOLINK;
+
+	if (gen_branch_or_nop(branch_type, ip, old_addr, plt, &old_insn) < 0)
+		return -EFAULT;
+
+	if (gen_branch_or_nop(branch_type, ip, new_addr, plt, &new_insn) < 0)
+		return -EFAULT;
+
+	if (is_long_jump(ip, new_addr))
+		plt_target = (u64)new_addr;
+	else if (is_long_jump(ip, old_addr))
+		/* if the old target is a long jump and the new target is not,
+		 * restore the plt target to dummy_tramp, so there is always a
+		 * legal and harmless address stored in plt target, and we'll
+		 * never jump from plt to an unknown place.
+		 */
+		plt_target = (u64)&dummy_tramp;
+
+	if (plt_target) {
+		/* non-zero plt_target indicates we're patching a bpf prog,
+		 * which is read only.
+		 */
+		if (set_memory_rw(PAGE_MASK & ((uintptr_t)&plt->target), 1))
+			return -EFAULT;
+		WRITE_ONCE(plt->target, plt_target);
+		set_memory_ro(PAGE_MASK & ((uintptr_t)&plt->target), 1);
+		/* since plt target points to either the new trampoline
+		 * or dummy_tramp, even if another CPU reads the old plt
+		 * target value before fetching the bl instruction to plt,
+		 * it will be brought back by dummy_tramp, so no barrier is
+		 * required here.
+		 */
+	}
+
+	/* if the old target and the new target are both long jumps, no
+	 * patching is required
+	 */
+	if (old_insn == new_insn)
+		return 0;
+
+	mutex_lock(&text_mutex);
+	if (aarch64_insn_read(ip, &replaced)) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	if (replaced != old_insn) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	/* We call aarch64_insn_patch_text_nosync() to replace instruction
+	 * atomically, so no other CPUs will fetch a half-new and half-old
+	 * instruction. But there is chance that another CPU executes the
+	 * old instruction after the patching operation finishes (e.g.,
+	 * pipeline not flushed, or icache not synchronized yet).
+	 *
+	 * 1. when a new trampoline is attached, it is not a problem for
+	 *    different CPUs to jump to different trampolines temporarily.
+	 *
+	 * 2. when an old trampoline is freed, we should wait for all other
+	 *    CPUs to exit the trampoline and make sure the trampoline is no
+	 *    longer reachable, since bpf_tramp_image_put() function already
+	 *    uses percpu_ref and task-based rcu to do the sync, no need to call
+	 *    the sync version here, see bpf_tramp_image_put() for details.
+	 */
+	ret = aarch64_insn_patch_text_nosync(ip, new_insn);
+out:
+	mutex_unlock(&text_mutex);
+
+	return ret;
+}
diff --git a/arch/arm64/tools/Makefile b/arch/arm64/tools/Makefile
new file mode 100644
index 000000000..07a93ab21
--- /dev/null
+++ b/arch/arm64/tools/Makefile
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+
+gen := arch/$(ARCH)/include/generated
+kapi := $(gen)/asm
+
+kapi-hdrs-y := $(kapi)/cpucaps.h $(kapi)/sysreg-defs.h
+
+targets += $(addprefix ../../../, $(kapi-hdrs-y))
+
+PHONY += kapi
+
+kapi:   $(kapi-hdrs-y)
+
+quiet_cmd_gen_cpucaps = GEN     $@
+      cmd_gen_cpucaps = mkdir -p $(dir $@); $(AWK) -f $(real-prereqs) > $@
+
+quiet_cmd_gen_sysreg = GEN     $@
+      cmd_gen_sysreg = mkdir -p $(dir $@); $(AWK) -f $(real-prereqs) > $@
+
+$(kapi)/cpucaps.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE
+	$(call if_changed,gen_cpucaps)
+
+$(kapi)/sysreg-defs.h: $(src)/gen-sysreg.awk $(src)/sysreg FORCE
+	$(call if_changed,gen_sysreg)
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
new file mode 100644
index 000000000..5511bee15
--- /dev/null
+++ b/arch/arm64/tools/cpucaps
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Internal CPU capabilities constants, keep this list sorted
+
+ALWAYS_BOOT
+ALWAYS_SYSTEM
+BTI
+# Unreliable: use system_supports_32bit_el0() instead.
+HAS_32BIT_EL0_DO_NOT_USE
+HAS_32BIT_EL1
+HAS_ADDRESS_AUTH
+HAS_ADDRESS_AUTH_ARCH_QARMA3
+HAS_ADDRESS_AUTH_ARCH_QARMA5
+HAS_ADDRESS_AUTH_IMP_DEF
+HAS_AMU_EXTN
+HAS_ARMv8_4_TTL
+HAS_CACHE_DIC
+HAS_CACHE_IDC
+HAS_CNP
+HAS_CRC32
+HAS_DCPODP
+HAS_DCPOP
+HAS_DIT
+HAS_E0PD
+HAS_ECV
+HAS_ECV_CNTPOFF
+HAS_EPAN
+HAS_EVT
+HAS_FGT
+HAS_GENERIC_AUTH
+HAS_GENERIC_AUTH_ARCH_QARMA3
+HAS_GENERIC_AUTH_ARCH_QARMA5
+HAS_GENERIC_AUTH_IMP_DEF
+HAS_GIC_CPUIF_SYSREGS
+HAS_GIC_PRIO_MASKING
+HAS_GIC_PRIO_RELAXED_SYNC
+HAS_HCX
+HAS_LDAPR
+HAS_LSE_ATOMICS
+HAS_MOPS
+HAS_NESTED_VIRT
+HAS_NO_FPSIMD
+HAS_NO_HW_PREFETCH
+HAS_PAN
+HAS_S1PIE
+HAS_RAS_EXTN
+HAS_RNG
+HAS_SB
+HAS_STAGE2_FWB
+HAS_TCR2
+HAS_TIDCP1
+HAS_TLB_RANGE
+HAS_VIRT_HOST_EXTN
+HAS_WFXT
+HW_DBM
+KVM_HVHE
+KVM_PROTECTED_MODE
+MISMATCHED_CACHE_TYPE
+MTE
+MTE_ASYMM
+SME
+SME_FA64
+SME2
+SPECTRE_V2
+SPECTRE_V3A
+SPECTRE_V4
+SPECTRE_BHB
+SSBS
+SVE
+UNMAP_KERNEL_AT_EL0
+WORKAROUND_834220
+WORKAROUND_843419
+WORKAROUND_845719
+WORKAROUND_858921
+WORKAROUND_1418040
+WORKAROUND_1463225
+WORKAROUND_1508412
+WORKAROUND_1542419
+WORKAROUND_1742098
+WORKAROUND_1902691
+WORKAROUND_2038923
+WORKAROUND_2064142
+WORKAROUND_2077057
+WORKAROUND_2457168
+WORKAROUND_2645198
+WORKAROUND_2658417
+WORKAROUND_AMPERE_AC03_CPU_38
+WORKAROUND_TRBE_OVERWRITE_FILL_MODE
+WORKAROUND_TSB_FLUSH_FAILURE
+WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
+WORKAROUND_CAVIUM_23154
+WORKAROUND_CAVIUM_27456
+WORKAROUND_CAVIUM_30115
+WORKAROUND_CAVIUM_TX2_219_PRFM
+WORKAROUND_CAVIUM_TX2_219_TVM
+WORKAROUND_CLEAN_CACHE
+WORKAROUND_DEVICE_LOAD_ACQUIRE
+WORKAROUND_NVIDIA_CARMEL_CNP
+WORKAROUND_QCOM_FALKOR_E1003
+WORKAROUND_REPEAT_TLBI
+WORKAROUND_SPECULATIVE_AT
+WORKAROUND_SPECULATIVE_UNPRIV_LOAD
diff --git a/arch/arm64/tools/gen-cpucaps.awk b/arch/arm64/tools/gen-cpucaps.awk
new file mode 100755
index 000000000..852598037
--- /dev/null
+++ b/arch/arm64/tools/gen-cpucaps.awk
@@ -0,0 +1,40 @@
+#!/bin/awk -f
+# SPDX-License-Identifier: GPL-2.0
+# gen-cpucaps.awk: arm64 cpucaps header generator
+#
+# Usage: awk -f gen-cpucaps.awk cpucaps.txt
+
+# Log an error and terminate
+function fatal(msg) {
+	print "Error at line " NR ": " msg > "/dev/stderr"
+	exit 1
+}
+
+# skip blank lines and comment lines
+/^$/ { next }
+/^#/ { next }
+
+BEGIN {
+	print "#ifndef __ASM_CPUCAPS_H"
+	print "#define __ASM_CPUCAPS_H"
+	print ""
+	print "/* Generated file - do not edit */"
+	cap_num = 0
+	print ""
+}
+
+/^[vA-Z0-9_]+$/ {
+	printf("#define ARM64_%-40s\t%d\n", $0, cap_num++)
+	next
+}
+
+END {
+	printf("#define ARM64_NCAPS\t\t\t\t\t%d\n", cap_num)
+	print ""
+	print "#endif /* __ASM_CPUCAPS_H */"
+}
+
+# Any lines not handled by previous rules are unexpected
+{
+	fatal("unhandled statement")
+}
diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk
new file mode 100755
index 000000000..d1254a056
--- /dev/null
+++ b/arch/arm64/tools/gen-sysreg.awk
@@ -0,0 +1,336 @@
+#!/bin/awk -f
+# SPDX-License-Identifier: GPL-2.0
+# gen-sysreg.awk: arm64 sysreg header generator
+#
+# Usage: awk -f gen-sysreg.awk sysregs.txt
+
+function block_current() {
+	return __current_block[__current_block_depth];
+}
+
+# Log an error and terminate
+function fatal(msg) {
+	print "Error at " NR ": " msg > "/dev/stderr"
+
+	printf "Current block nesting:"
+
+	for (i = 0; i <= __current_block_depth; i++) {
+		printf " " __current_block[i]
+	}
+	printf "\n"
+
+	exit 1
+}
+
+# Enter a new block, setting the active block to @block
+function block_push(block) {
+	__current_block[++__current_block_depth] = block
+}
+
+# Exit a block, setting the active block to the parent block
+function block_pop() {
+	if (__current_block_depth == 0)
+		fatal("error: block_pop() in root block")
+
+	__current_block_depth--;
+}
+
+# Sanity check the number of records for a field makes sense. If not, produce
+# an error and terminate.
+function expect_fields(nf) {
+	if (NF != nf)
+		fatal(NF " fields found where " nf " expected")
+}
+
+# Print a CPP macro definition, padded with spaces so that the macro bodies
+# line up in a column
+function define(name, val) {
+	printf "%-56s%s\n", "#define " name, val
+}
+
+# Print standard BITMASK/SHIFT/WIDTH CPP definitions for a field
+function define_field(reg, field, msb, lsb) {
+	define(reg "_" field, "GENMASK(" msb ", " lsb ")")
+	define(reg "_" field "_MASK", "GENMASK(" msb ", " lsb ")")
+	define(reg "_" field "_SHIFT", lsb)
+	define(reg "_" field "_WIDTH", msb - lsb + 1)
+}
+
+# Print a field _SIGNED definition for a field
+function define_field_sign(reg, field, sign) {
+	define(reg "_" field "_SIGNED", sign)
+}
+
+# Parse a "<msb>[:<lsb>]" string into the global variables @msb and @lsb
+function parse_bitdef(reg, field, bitdef, _bits)
+{
+	if (bitdef ~ /^[0-9]+$/) {
+		msb = bitdef
+		lsb = bitdef
+	} else if (split(bitdef, _bits, ":") == 2) {
+		msb = _bits[1]
+		lsb = _bits[2]
+	} else {
+		fatal("invalid bit-range definition '" bitdef "'")
+	}
+
+
+	if (msb != next_bit)
+		fatal(reg "." field " starts at " msb " not " next_bit)
+	if (63 < msb || msb < 0)
+		fatal(reg "." field " invalid high bit in '" bitdef "'")
+	if (63 < lsb || lsb < 0)
+		fatal(reg "." field " invalid low bit in '" bitdef "'")
+	if (msb < lsb)
+		fatal(reg "." field " invalid bit-range '" bitdef "'")
+	if (low > high)
+		fatal(reg "." field " has invalid range " high "-" low)
+
+	next_bit = lsb - 1
+}
+
+BEGIN {
+	print "#ifndef __ASM_SYSREG_DEFS_H"
+	print "#define __ASM_SYSREG_DEFS_H"
+	print ""
+	print "/* Generated file - do not edit */"
+	print ""
+
+	__current_block_depth = 0
+	__current_block[__current_block_depth] = "Root"
+}
+
+END {
+	if (__current_block_depth != 0)
+		fatal("Missing terminator for " block_current() " block")
+
+	print "#endif /* __ASM_SYSREG_DEFS_H */"
+}
+
+# skip blank lines and comment lines
+/^$/ { next }
+/^[\t ]*#/ { next }
+
+/^SysregFields/ && block_current() == "Root" {
+	block_push("SysregFields")
+
+	expect_fields(2)
+
+	reg = $2
+
+	res0 = "UL(0)"
+	res1 = "UL(0)"
+	unkn = "UL(0)"
+
+	next_bit = 63
+
+	next
+}
+
+/^EndSysregFields/ && block_current() == "SysregFields" {
+	if (next_bit > 0)
+		fatal("Unspecified bits in " reg)
+
+	define(reg "_RES0", "(" res0 ")")
+	define(reg "_RES1", "(" res1 ")")
+	define(reg "_UNKN", "(" unkn ")")
+	print ""
+
+	reg = null
+	res0 = null
+	res1 = null
+	unkn = null
+
+	block_pop()
+	next
+}
+
+/^Sysreg/ && block_current() == "Root" {
+	block_push("Sysreg")
+
+	expect_fields(7)
+
+	reg = $2
+	op0 = $3
+	op1 = $4
+	crn = $5
+	crm = $6
+	op2 = $7
+
+	res0 = "UL(0)"
+	res1 = "UL(0)"
+	unkn = "UL(0)"
+
+	define("REG_" reg, "S" op0 "_" op1 "_C" crn "_C" crm "_" op2)
+	define("SYS_" reg, "sys_reg(" op0 ", " op1 ", " crn ", " crm ", " op2 ")")
+
+	define("SYS_" reg "_Op0", op0)
+	define("SYS_" reg "_Op1", op1)
+	define("SYS_" reg "_CRn", crn)
+	define("SYS_" reg "_CRm", crm)
+	define("SYS_" reg "_Op2", op2)
+
+	print ""
+
+	next_bit = 63
+
+	next
+}
+
+/^EndSysreg/ && block_current() == "Sysreg" {
+	if (next_bit > 0)
+		fatal("Unspecified bits in " reg)
+
+	if (res0 != null)
+		define(reg "_RES0", "(" res0 ")")
+	if (res1 != null)
+		define(reg "_RES1", "(" res1 ")")
+	if (unkn != null)
+		define(reg "_UNKN", "(" unkn ")")
+	if (res0 != null || res1 != null || unkn != null)
+		print ""
+
+	reg = null
+	op0 = null
+	op1 = null
+	crn = null
+	crm = null
+	op2 = null
+	res0 = null
+	res1 = null
+	unkn = null
+
+	block_pop()
+	next
+}
+
+# Currently this is effectivey a comment, in future we may want to emit
+# defines for the fields.
+/^Fields/ && block_current() == "Sysreg" {
+	expect_fields(2)
+
+	if (next_bit != 63)
+		fatal("Some fields already defined for " reg)
+
+	print "/* For " reg " fields see " $2 " */"
+	print ""
+
+        next_bit = 0
+	res0 = null
+	res1 = null
+	unkn = null
+
+	next
+}
+
+
+/^Res0/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	expect_fields(2)
+	parse_bitdef(reg, "RES0", $2)
+	field = "RES0_" msb "_" lsb
+
+	res0 = res0 " | GENMASK_ULL(" msb ", " lsb ")"
+
+	next
+}
+
+/^Res1/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	expect_fields(2)
+	parse_bitdef(reg, "RES1", $2)
+	field = "RES1_" msb "_" lsb
+
+	res1 = res1 " | GENMASK_ULL(" msb ", " lsb ")"
+
+	next
+}
+
+/^Unkn/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	expect_fields(2)
+	parse_bitdef(reg, "UNKN", $2)
+	field = "UNKN_" msb "_" lsb
+
+	unkn = unkn " | GENMASK_ULL(" msb ", " lsb ")"
+
+	next
+}
+
+/^Field/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	expect_fields(3)
+	field = $3
+	parse_bitdef(reg, field, $2)
+
+	define_field(reg, field, msb, lsb)
+	print ""
+
+	next
+}
+
+/^Raz/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	expect_fields(2)
+	parse_bitdef(reg, field, $2)
+
+	next
+}
+
+/^SignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Enum")
+
+	expect_fields(3)
+	field = $3
+	parse_bitdef(reg, field, $2)
+
+	define_field(reg, field, msb, lsb)
+	define_field_sign(reg, field, "true")
+
+	next
+}
+
+/^UnsignedEnum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Enum")
+
+	expect_fields(3)
+	field = $3
+	parse_bitdef(reg, field, $2)
+
+	define_field(reg, field, msb, lsb)
+	define_field_sign(reg, field, "false")
+
+	next
+}
+
+/^Enum/ && (block_current() == "Sysreg" || block_current() == "SysregFields") {
+	block_push("Enum")
+
+	expect_fields(3)
+	field = $3
+	parse_bitdef(reg, field, $2)
+
+	define_field(reg, field, msb, lsb)
+
+	next
+}
+
+/^EndEnum/ && block_current() == "Enum" {
+
+	field = null
+	msb = null
+	lsb = null
+	print ""
+
+	block_pop()
+	next
+}
+
+/0b[01]+/ && block_current() == "Enum" {
+	expect_fields(2)
+	val = $1
+	name = $2
+
+	define(reg "_" field "_" name, "UL(" val ")")
+	next
+}
+
+# Any lines not handled by previous rules are unexpected
+{
+	fatal("unhandled statement")
+}
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
new file mode 100644
index 000000000..76ce150e7
--- /dev/null
+++ b/arch/arm64/tools/sysreg
@@ -0,0 +1,2630 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# System register metadata
+
+# Each System register is described by a Sysreg block:
+
+# Sysreg 	<name>	<op0> 	<op1>	<crn>	<crm>	<op2>
+# <field>
+# ...
+# EndSysreg
+
+# Within a Sysreg block, each field can be described as one of:
+
+# Res0	<msb>[:<lsb>]
+
+# Res1	<msb>[:<lsb>]
+
+# Unkn	<msb>[:<lsb>]
+
+# Field	<msb>[:<lsb>]	<name>
+
+# Enum	<msb>[:<lsb>]	<name>
+#	<enumval>	<enumname>
+#	...
+# EndEnum
+
+# Alternatively if multiple registers share the same layout then
+# a SysregFields block can be used to describe the shared layout
+
+# SysregFields	<fieldsname>
+# <field>
+# ...
+# EndSysregFields
+
+# and referenced from within the Sysreg:
+
+# Sysreg 	<name>	<op0> 	<op1>	<crn>	<crm>	<op2>
+# Fields	<fieldsname>
+# EndSysreg
+
+# For ID registers we adopt a few conventions for translating the
+# language in the ARM into defines:
+#
+# NI  - Not implemented
+# IMP - Implemented
+#
+# In general it is recommended that new enumeration items be named for the
+# feature that introduces them (eg, FEAT_LS64_ACCDATA introduces enumeration
+# item ACCDATA) though it may be more taseful to do something else.
+
+Sysreg	OSDTRRX_EL1	2	0	0	0	2
+Res0	63:32
+Field	31:0	DTRRX
+EndSysreg
+
+Sysreg	MDCCINT_EL1	2	0	0	2	0
+Res0	63:31
+Field	30	RX
+Field	29	TX
+Res0	28:0
+EndSysreg
+
+Sysreg	MDSCR_EL1	2	0	0	2	2
+Res0	63:36
+Field	35	EHBWE
+Field	34	EnSPM
+Field	33	TTA
+Field	32	EMBWE
+Field	31	TFO
+Field	30	RXfull
+Field	29	TXfull
+Res0	28
+Field	27	RXO
+Field	26	TXU
+Res0	25:24
+Field	23:22	INTdis
+Field	21	TDA
+Res0	20
+Field	19	SC2
+Res0	18:16
+Field	15	MDE
+Field	14	HDE
+Field	13	KDE
+Field	12	TDCC
+Res0	11:7
+Field	6	ERR
+Res0	5:1
+Field	0	SS
+EndSysreg
+
+Sysreg	OSDTRTX_EL1	2	0	0	3	2
+Res0	63:32
+Field	31:0	DTRTX
+EndSysreg
+
+Sysreg	OSECCR_EL1	2	0	0	6	2
+Res0	63:32
+Field	31:0	EDECCR
+EndSysreg
+
+Sysreg	OSLAR_EL1	2	0	1	0	4
+Res0	63:1
+Field	0	OSLK
+EndSysreg
+
+Sysreg ID_PFR0_EL1	3	0	0	1	0
+Res0	63:32
+UnsignedEnum	31:28	RAS
+	0b0000	NI
+	0b0001	RAS
+	0b0010	RASv1p1
+EndEnum
+UnsignedEnum	27:24	DIT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	AMU
+	0b0000	NI
+	0b0001	AMUv1
+	0b0010	AMUv1p1
+EndEnum
+UnsignedEnum	19:16	CSV2
+	0b0000	UNDISCLOSED
+	0b0001	IMP
+	0b0010	CSV2p1
+EndEnum
+UnsignedEnum	15:12	State3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	State2
+	0b0000	NI
+	0b0001	NO_CV
+	0b0010	CV
+EndEnum
+UnsignedEnum	7:4	State1
+	0b0000	NI
+	0b0001	THUMB
+	0b0010	THUMB2
+EndEnum
+UnsignedEnum	3:0	State0
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_PFR1_EL1	3	0	0	1	1
+Res0	63:32
+UnsignedEnum	31:28	GIC
+	0b0000	NI
+	0b0001	GICv3
+	0b0010	GICv4p1
+EndEnum
+UnsignedEnum	27:24	Virt_frac
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	Sec_frac
+	0b0000	NI
+	0b0001	WALK_DISABLE
+	0b0010	SECURE_MEMORY
+EndEnum
+UnsignedEnum	19:16	GenTimer
+	0b0000	NI
+	0b0001	IMP
+	0b0010	ECV
+EndEnum
+UnsignedEnum	15:12	Virtualization
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	MProgMod
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	Security
+	0b0000	NI
+	0b0001	EL3
+	0b0001	NSACR_RFR
+EndEnum
+UnsignedEnum	3:0	ProgMod
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_DFR0_EL1	3	0	0	1	2
+Res0	63:32
+UnsignedEnum	31:28	TraceFilt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	PerfMon
+	0b0000	NI
+	0b0001	PMUv1
+	0b0010	PMUv2
+	0b0011	PMUv3
+	0b0100	PMUv3p1
+	0b0101	PMUv3p4
+	0b0110	PMUv3p5
+	0b0111	PMUv3p7
+	0b1000	PMUv3p8
+	0b1111	IMPDEF
+EndEnum
+Enum	23:20	MProfDbg
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	MMapTrc
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	CopTrc
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	MMapDbg
+	0b0000	NI
+	0b0100	Armv7
+	0b0101	Armv7p1
+EndEnum
+Field	7:4	CopSDbg
+Enum	3:0	CopDbg
+	0b0000	NI
+	0b0010	Armv6
+	0b0011	Armv6p1
+	0b0100	Armv7
+	0b0101	Armv7p1
+	0b0110	Armv8
+	0b0111	VHE
+	0b1000	Debugv8p2
+	0b1001	Debugv8p4
+	0b1010	Debugv8p8
+EndEnum
+EndSysreg
+
+Sysreg ID_AFR0_EL1	3	0	0	1	3
+Res0	63:16
+Field	15:12	IMPDEF3
+Field	11:8	IMPDEF2
+Field	7:4	IMPDEF1
+Field	3:0	IMPDEF0
+EndSysreg
+
+Sysreg ID_MMFR0_EL1	3	0	0	1	4
+Res0	63:32
+Enum	31:28	InnerShr
+	0b0000	NC
+	0b0001	HW
+	0b1111	IGNORED
+EndEnum
+UnsignedEnum	27:24	FCSE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	AuxReg
+	0b0000	NI
+	0b0001	ACTLR
+	0b0010	AIFSR
+EndEnum
+Enum	19:16	TCM
+	0b0000	NI
+	0b0001	IMPDEF
+	0b0010	TCM
+	0b0011	TCM_DMA
+EndEnum
+Enum	15:12	ShareLvl
+	0b0000	ONE
+	0b0001	TWO
+EndEnum
+Enum	11:8	OuterShr
+	0b0000	NC
+	0b0001	HW
+	0b1111	IGNORED
+EndEnum
+Enum	7:4	PMSA
+	0b0000	NI
+	0b0001	IMPDEF
+	0b0010	PMSAv6
+	0b0011	PMSAv7
+EndEnum
+Enum	3:0	VMSA
+	0b0000	NI
+	0b0001	IMPDEF
+	0b0010	VMSAv6
+	0b0011	VMSAv7
+	0b0100	VMSAv7_PXN
+	0b0101	VMSAv7_LONG
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR1_EL1	3	0	0	1	5
+Res0	63:32
+Enum	31:28	BPred
+	0b0000	NI
+	0b0001	BP_SW_MANGED
+	0b0010	BP_ASID_AWARE
+	0b0011	BP_NOSNOOP
+	0b0100	BP_INVISIBLE
+EndEnum
+Enum	27:24	L1TstCln
+	0b0000	NI
+	0b0001	NOINVALIDATE
+	0b0010	INVALIDATE
+EndEnum
+Enum	23:20	L1Uni
+	0b0000	NI
+	0b0001	INVALIDATE
+	0b0010	CLEAN_AND_INVALIDATE
+EndEnum
+Enum	19:16	L1Hvd
+	0b0000	NI
+	0b0001	INVALIDATE_ISIDE_ONLY
+	0b0010	INVALIDATE
+	0b0011	CLEAN_AND_INVALIDATE
+EndEnum
+Enum	15:12	L1UniSW
+	0b0000	NI
+	0b0001	CLEAN
+	0b0010	CLEAN_AND_INVALIDATE
+	0b0011	INVALIDATE
+EndEnum
+Enum	11:8	L1HvdSW
+	0b0000	NI
+	0b0001	CLEAN_AND_INVALIDATE
+	0b0010	INVALIDATE_DSIDE_ONLY
+	0b0011	INVALIDATE
+EndEnum
+Enum	7:4	L1UniVA
+	0b0000	NI
+	0b0001	CLEAN_AND_INVALIDATE
+	0b0010	INVALIDATE_BP
+EndEnum
+Enum	3:0	L1HvdVA
+	0b0000	NI
+	0b0001	CLEAN_AND_INVALIDATE
+	0b0010	INVALIDATE_BP
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR2_EL1	3	0	0	1	6
+Res0	63:32
+Enum	31:28	HWAccFlg
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	WFIStall
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	MemBarr
+	0b0000	NI
+	0b0001	DSB_ONLY
+	0b0010	IMP
+EndEnum
+Enum	19:16	UniTLB
+	0b0000	NI
+	0b0001	BY_VA
+	0b0010	BY_MATCH_ASID
+	0b0011	BY_ALL_ASID
+	0b0100	OTHER_TLBS
+	0b0101	BROADCAST
+	0b0110	BY_IPA
+EndEnum
+Enum	15:12	HvdTLB
+	0b0000	NI
+EndEnum
+Enum	11:8	L1HvdRng
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	L1HvdBG
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	L1HvdFG
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR3_EL1	3	0	0	1	7
+Res0	63:32
+Enum	31:28	Supersec
+	0b0000	IMP
+	0b1111	NI
+EndEnum
+Enum	27:24	CMemSz
+	0b0000	4GB
+	0b0001	64GB
+	0b0010	1TB
+EndEnum
+Enum	23:20	CohWalk
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	PAN
+	0b0000	NI
+	0b0001	PAN
+	0b0010	PAN2
+EndEnum
+Enum	15:12	MaintBcst
+	0b0000	NI
+	0b0001	NO_TLB
+	0b0010	ALL
+EndEnum
+Enum	11:8	BPMaint
+	0b0000	NI
+	0b0001	ALL
+	0b0010	BY_VA
+EndEnum
+Enum	7:4	CMaintSW
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	CMaintVA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR0_EL1	3	0	0	2	0
+Res0	63:28
+Enum	27:24	Divide
+	0b0000	NI
+	0b0001	xDIV_T32
+	0b0010	xDIV_A32
+EndEnum
+UnsignedEnum	23:20	Debug
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	Coproc
+	0b0000	NI
+	0b0001	MRC
+	0b0010	MRC2
+	0b0011	MRRC
+	0b0100	MRRC2
+EndEnum
+UnsignedEnum	15:12	CmpBranch
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	BitField
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	BitCount
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	Swap
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR1_EL1	3	0	0	2	1
+Res0	63:32
+Enum	31:28	Jazelle
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	Interwork
+	0b0000	NI
+	0b0001	BX
+	0b0010	BLX
+	0b0011	A32_BX
+EndEnum
+Enum	23:20	Immediate
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	IfThen
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	Extend
+	0b0000	NI
+	0b0001	SXTB
+	0b0010	SXTB16
+EndEnum
+Enum	11:8	Except_AR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	Except
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	Endian
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR2_EL1	3	0	0	2	2
+Res0	63:32
+Enum	31:28	Reversal
+	0b0000	NI
+	0b0001	REV
+	0b0010	RBIT
+EndEnum
+Enum	27:24	PSR_AR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	MultU
+	0b0000	NI
+	0b0001	UMULL
+	0b0010	UMAAL
+EndEnum
+Enum	19:16	MultS
+	0b0000	NI
+	0b0001	SMULL
+	0b0010	SMLABB
+	0b0011	SMLAD
+EndEnum
+Enum	15:12	Mult
+	0b0000	NI
+	0b0001	MLA
+	0b0010	MLS
+EndEnum
+Enum	11:8	MultiAccessInt
+	0b0000	NI
+	0b0001	RESTARTABLE
+	0b0010	CONTINUABLE
+EndEnum
+Enum	7:4	MemHint
+	0b0000	NI
+	0b0001	PLD
+	0b0010	PLD2
+	0b0011	PLI
+	0b0100	PLDW
+EndEnum
+Enum	3:0	LoadStore
+	0b0000	NI
+	0b0001	DOUBLE
+	0b0010	ACQUIRE
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR3_EL1	3	0	0	2	3
+Res0	63:32
+Enum	31:28	T32EE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	TrueNOP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	T32Copy
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	19:16	TabBranch
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SynchPrim
+	0b0000	NI
+	0b0001	EXCLUSIVE
+	0b0010	DOUBLE
+EndEnum
+Enum	11:8	SVC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	SIMD
+	0b0000	NI
+	0b0001	SSAT
+	0b0011	PKHBT
+EndEnum
+Enum	3:0	Saturate
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR4_EL1	3	0	0	2	4
+Res0	63:32
+Enum	31:28	SWP_frac
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	27:24	PSR_M
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	23:20	SynchPrim_frac
+	0b0000	NI
+	0b0011	IMP
+EndEnum
+Enum	19:16	Barrier
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	15:12	SMC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	11:8	Writeback
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	WithShifts
+	0b0000	NI
+	0b0001	LSL3
+	0b0011	LS
+	0b0100	REG
+EndEnum
+Enum	3:0	Unpriv
+	0b0000	NI
+	0b0001	REG_BYTE
+	0b0010	SIGNED_HALFWORD
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR5_EL1	3	0	0	2	5
+Res0	63:32
+UnsignedEnum	31:28	VCMA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	RDM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	23:20
+UnsignedEnum	19:16	CRC32
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	SHA2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	SHA1
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	AES
+	0b0000	NI
+	0b0001	IMP
+	0b0010  VMULL
+EndEnum
+UnsignedEnum	3:0	SEVL
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_ISAR6_EL1	3	0	0	2	7
+Res0	63:28
+UnsignedEnum	27:24	I8MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	BF16
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	19:16	SPECRES
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	SB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	FHM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	DP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	JSCVT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR4_EL1	3	0	0	2	6
+Res0	63:32
+UnsignedEnum	31:28	EVT
+	0b0000	NI
+	0b0001	NO_TLBIS
+	0b0010	TLBIS
+EndEnum
+UnsignedEnum	27:24	CCIDX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	LSM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	19:16	HPDS
+	0b0000	NI
+	0b0001	AA32HPD
+	0b0010	HPDS2
+EndEnum
+UnsignedEnum	15:12	CnP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	XNX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	AC2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	SpecSEI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg MVFR0_EL1	3	0	0	3	0
+Res0	63:32
+UnsignedEnum	31:28	FPRound
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	FPShVec
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	FPSqrt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	19:16	FPDivide
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	FPTrap
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	FPDP
+	0b0000	NI
+	0b0001	VFPv2
+	0b0010	VFPv3
+EndEnum
+UnsignedEnum	7:4	FPSP
+	0b0000	NI
+	0b0001	VFPv2
+	0b0010	VFPv3
+EndEnum
+Enum	3:0	SIMDReg
+	0b0000	NI
+	0b0001	IMP_16x64
+	0b0010	IMP_32x64
+EndEnum
+EndSysreg
+
+Sysreg MVFR1_EL1	3	0	0	3	1
+Res0	63:32
+UnsignedEnum	31:28	SIMDFMAC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	FPHP
+	0b0000	NI
+	0b0001	FPHP
+	0b0010	FPHP_CONV
+	0b0011	FP16
+EndEnum
+UnsignedEnum	23:20	SIMDHP
+	0b0000	NI
+	0b0001	SIMDHP
+	0b0010	SIMDHP_FLOAT
+EndEnum
+UnsignedEnum	19:16	SIMDSP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	SIMDInt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	SIMDLS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	FPDNaN
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	FPFtZ
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg MVFR2_EL1	3	0	0	3	2
+Res0	63:8
+Enum	7:4	FPMisc
+	0b0000	NI
+	0b0001	FP
+	0b0010	FP_DIRECTED_ROUNDING
+	0b0011	FP_ROUNDING
+	0b0100	FP_MAX_MIN
+EndEnum
+Enum	3:0	SIMDMisc
+	0b0000	NI
+	0b0001	SIMD_DIRECTED_ROUNDING
+	0b0010	SIMD_ROUNDING
+	0b0011	SIMD_MAX_MIN
+EndEnum
+EndSysreg
+
+Sysreg ID_PFR2_EL1	3	0	0	3	4
+Res0	63:12
+UnsignedEnum	11:8	RAS_frac
+	0b0000	NI
+	0b0001	RASv1p1
+EndEnum
+UnsignedEnum	7:4	SSBS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	CSV3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg ID_DFR1_EL1	3	0	0	3	5
+Res0	63:8
+UnsignedEnum	7:4	HPMN0
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	3:0	MTPMU
+	0b0000	IMPDEF
+	0b0001	IMP
+	0b1111	NI
+EndEnum
+EndSysreg
+
+Sysreg ID_MMFR5_EL1	3	0	0	3	6
+Res0	63:8
+UnsignedEnum	7:4	nTLBPA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	ETS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64PFR0_EL1	3	0	0	4	0
+UnsignedEnum	63:60	CSV3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	CSV2
+	0b0000	NI
+	0b0001	IMP
+	0b0010	CSV2_2
+	0b0011	CSV2_3
+EndEnum
+UnsignedEnum	55:52	RME
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	51:48	DIT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	47:44	AMU
+	0b0000	NI
+	0b0001	IMP
+	0b0010	V1P1
+EndEnum
+UnsignedEnum	43:40	MPAM
+	0b0000	0
+	0b0001	1
+EndEnum
+UnsignedEnum	39:36	SEL2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	SVE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	31:28	RAS
+	0b0000	NI
+	0b0001	IMP
+	0b0010	V1P1
+EndEnum
+UnsignedEnum	27:24	GIC
+	0b0000	NI
+	0b0001	IMP
+	0b0010	V4P1
+EndEnum
+SignedEnum	23:20	AdvSIMD
+	0b0000	IMP
+	0b0001	FP16
+	0b1111	NI
+EndEnum
+SignedEnum	19:16	FP
+	0b0000	IMP
+	0b0001	FP16
+	0b1111	NI
+EndEnum
+UnsignedEnum	15:12	EL3
+	0b0000	NI
+	0b0001	IMP
+	0b0010	AARCH32
+EndEnum
+UnsignedEnum	11:8	EL2
+	0b0000	NI
+	0b0001	IMP
+	0b0010	AARCH32
+EndEnum
+UnsignedEnum	7:4	EL1
+	0b0001	IMP
+	0b0010	AARCH32
+EndEnum
+UnsignedEnum	3:0	EL0
+	0b0001	IMP
+	0b0010	AARCH32
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64PFR1_EL1	3	0	0	4	1
+UnsignedEnum	63:60	PFAR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	DF2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	55:52	MTEX
+	0b0000	MTE
+	0b0001	MTE4
+EndEnum
+UnsignedEnum	51:48	THE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	47:44	GCS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	43:40	MTE_frac
+	0b0000	ASYNC
+	0b1111	NI
+EndEnum
+UnsignedEnum	39:36	NMI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	CSV2_frac
+	0b0000	NI
+	0b0001	CSV2_1p1
+	0b0010	CSV2_1p2
+EndEnum
+UnsignedEnum	31:28	RNDR_trap
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	SME
+	0b0000	NI
+	0b0001	IMP
+	0b0010	SME2
+EndEnum
+Res0	23:20
+UnsignedEnum	19:16	MPAM_frac
+	0b0000	MINOR_0
+	0b0001	MINOR_1
+EndEnum
+UnsignedEnum	15:12	RAS_frac
+	0b0000	NI
+	0b0001	RASv1p1
+EndEnum
+UnsignedEnum	11:8	MTE
+	0b0000	NI
+	0b0001	IMP
+	0b0010	MTE2
+	0b0011	MTE3
+EndEnum
+UnsignedEnum	7:4	SSBS
+	0b0000	NI
+	0b0001	IMP
+	0b0010	SSBS2
+EndEnum
+UnsignedEnum	3:0	BT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64ZFR0_EL1	3	0	0	4	4
+Res0	63:60
+UnsignedEnum	59:56	F64MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	55:52	F32MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	51:48
+UnsignedEnum	47:44	I8MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	43:40	SM4
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	39:36
+UnsignedEnum	35:32	SHA3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	31:24
+UnsignedEnum	23:20	BF16
+	0b0000	NI
+	0b0001	IMP
+	0b0010	EBF16
+EndEnum
+UnsignedEnum	19:16	BitPerm
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	15:8
+UnsignedEnum	7:4	AES
+	0b0000	NI
+	0b0001	IMP
+	0b0010	PMULL128
+EndEnum
+UnsignedEnum	3:0	SVEver
+	0b0000	IMP
+	0b0001	SVE2
+	0b0010	SVE2p1
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64SMFR0_EL1	3	0	0	4	5
+UnsignedEnum	63	FA64
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	62:60
+UnsignedEnum	59:56	SMEver
+	0b0000	SME
+	0b0001	SME2
+	0b0010	SME2p1
+	0b0000	IMP
+EndEnum
+UnsignedEnum	55:52	I16I64
+	0b0000	NI
+	0b1111	IMP
+EndEnum
+Res0	51:49
+UnsignedEnum	48	F64F64
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	47:44	I16I32
+	0b0000	NI
+	0b0101	IMP
+EndEnum
+UnsignedEnum	43	B16B16
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	42	F16F16
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	41:40
+UnsignedEnum	39:36	I8I32
+	0b0000	NI
+	0b1111	IMP
+EndEnum
+UnsignedEnum	35	F16F32
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	34	B16F32
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	33	BI32I32
+	0b0	NI
+	0b1	IMP
+EndEnum
+UnsignedEnum	32	F32F32
+	0b0	NI
+	0b1	IMP
+EndEnum
+Res0	31:0
+EndSysreg
+
+Sysreg	ID_AA64DFR0_EL1	3	0	0	5	0
+Enum	63:60	HPMN0
+	0b0000	UNPREDICTABLE
+	0b0001	DEF
+EndEnum
+Res0	59:56
+UnsignedEnum	55:52	BRBE
+	0b0000	NI
+	0b0001	IMP
+	0b0010	BRBE_V1P1
+EndEnum
+Enum	51:48	MTPMU
+	0b0000	NI_IMPDEF
+	0b0001	IMP
+	0b1111	NI
+EndEnum
+UnsignedEnum	47:44	TraceBuffer
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	43:40	TraceFilt
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	DoubleLock
+	0b0000	IMP
+	0b1111	NI
+EndEnum
+UnsignedEnum	35:32	PMSVer
+	0b0000	NI
+	0b0001	IMP
+	0b0010	V1P1
+	0b0011	V1P2
+	0b0100	V1P3
+EndEnum
+Field	31:28	CTX_CMPs
+Res0	27:24
+Field	23:20	WRPs
+Res0	19:16
+Field	15:12	BRPs
+UnsignedEnum	11:8	PMUVer
+	0b0000	NI
+	0b0001	IMP
+	0b0100	V3P1
+	0b0101	V3P4
+	0b0110	V3P5
+	0b0111	V3P7
+	0b1000	V3P8
+	0b1111	IMP_DEF
+EndEnum
+UnsignedEnum	7:4	TraceVer
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	DebugVer
+	0b0110	IMP
+	0b0111	VHE
+	0b1000	V8P2
+	0b1001	V8P4
+	0b1010	V8P8
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64DFR1_EL1	3	0	0	5	1
+Res0	63:0
+EndSysreg
+
+Sysreg	ID_AA64AFR0_EL1	3	0	0	5	4
+Res0	63:32
+Field	31:28	IMPDEF7
+Field	27:24	IMPDEF6
+Field	23:20	IMPDEF5
+Field	19:16	IMPDEF4
+Field	15:12	IMPDEF3
+Field	11:8	IMPDEF2
+Field	7:4	IMPDEF1
+Field	3:0	IMPDEF0
+EndSysreg
+
+Sysreg	ID_AA64AFR1_EL1	3	0	0	5	5
+Res0	63:0
+EndSysreg
+
+Sysreg	ID_AA64ISAR0_EL1	3	0	0	6	0
+UnsignedEnum	63:60	RNDR
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	TLB
+	0b0000	NI
+	0b0001	OS
+	0b0010	RANGE
+EndEnum
+UnsignedEnum	55:52	TS
+	0b0000	NI
+	0b0001	FLAGM
+	0b0010	FLAGM2
+EndEnum
+UnsignedEnum	51:48	FHM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	47:44	DP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	43:40	SM4
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	SM3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	SHA3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	31:28	RDM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	TME
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	ATOMIC
+	0b0000	NI
+	0b0010	IMP
+EndEnum
+UnsignedEnum	19:16	CRC32
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	SHA2
+	0b0000	NI
+	0b0001	SHA256
+	0b0010	SHA512
+EndEnum
+UnsignedEnum	11:8	SHA1
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	AES
+	0b0000	NI
+	0b0001	AES
+	0b0010	PMULL
+EndEnum
+Res0	3:0
+EndSysreg
+
+Sysreg	ID_AA64ISAR1_EL1	3	0	0	6	1
+UnsignedEnum	63:60	LS64
+	0b0000	NI
+	0b0001	LS64
+	0b0010	LS64_V
+	0b0011	LS64_ACCDATA
+EndEnum
+UnsignedEnum	59:56	XS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	55:52	I8MM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	51:48	DGH
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	47:44	BF16
+	0b0000	NI
+	0b0001	IMP
+	0b0010	EBF16
+EndEnum
+UnsignedEnum	43:40	SPECRES
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	SB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	FRINTTS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	31:28	GPI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	GPA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	LRCPC
+	0b0000	NI
+	0b0001	IMP
+	0b0010	LRCPC2
+EndEnum
+UnsignedEnum	19:16	FCMA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	JSCVT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	API
+	0b0000	NI
+	0b0001	PAuth
+	0b0010	EPAC
+	0b0011	PAuth2
+	0b0100	FPAC
+	0b0101	FPACCOMBINE
+EndEnum
+UnsignedEnum	7:4	APA
+	0b0000	NI
+	0b0001	PAuth
+	0b0010	EPAC
+	0b0011	PAuth2
+	0b0100	FPAC
+	0b0101	FPACCOMBINE
+EndEnum
+UnsignedEnum	3:0	DPB
+	0b0000	NI
+	0b0001	IMP
+	0b0010	DPB2
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64ISAR2_EL1	3	0	0	6	2
+Res0	63:56
+UnsignedEnum	55:52	CSSC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	51:48	RPRFM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	47:32
+UnsignedEnum	31:28	CLRBHB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	PAC_frac
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	BC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	19:16	MOPS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	APA3
+	0b0000	NI
+	0b0001	PAuth
+	0b0010	EPAC
+	0b0011	PAuth2
+	0b0100	FPAC
+	0b0101	FPACCOMBINE
+EndEnum
+UnsignedEnum	11:8	GPA3
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	RPRES
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	WFxT
+	0b0000	NI
+	0b0010	IMP
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64MMFR0_EL1	3	0	0	7	0
+UnsignedEnum	63:60	ECV
+	0b0000	NI
+	0b0001	IMP
+	0b0010	CNTPOFF
+EndEnum
+UnsignedEnum	59:56	FGT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	55:48
+UnsignedEnum	47:44	EXS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	43:40	TGRAN4_2
+	0b0000	TGRAN4
+	0b0001	NI
+	0b0010	IMP
+	0b0011	52_BIT
+EndEnum
+Enum	39:36	TGRAN64_2
+	0b0000	TGRAN64
+	0b0001	NI
+	0b0010	IMP
+EndEnum
+Enum	35:32	TGRAN16_2
+	0b0000	TGRAN16
+	0b0001	NI
+	0b0010	IMP
+	0b0011	52_BIT
+EndEnum
+Enum	31:28	TGRAN4
+	0b0000	IMP
+	0b0001	52_BIT
+	0b1111	NI
+EndEnum
+Enum	27:24	TGRAN64
+	0b0000	IMP
+	0b1111	NI
+EndEnum
+Enum	23:20	TGRAN16
+	0b0000	NI
+	0b0001	IMP
+	0b0010	52_BIT
+EndEnum
+UnsignedEnum	19:16	BIGENDEL0
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	SNSMEM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	BIGEND
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	ASIDBITS
+	0b0000	8
+	0b0010	16
+EndEnum
+Enum	3:0	PARANGE
+	0b0000	32
+	0b0001	36
+	0b0010	40
+	0b0011	42
+	0b0100	44
+	0b0101	48
+	0b0110	52
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64MMFR1_EL1	3	0	0	7	1
+UnsignedEnum	63:60	ECBHB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	CMOW
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	55:52	TIDCP1
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	51:48	nTLBPA
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	47:44	AFP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	43:40	HCX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	39:36	ETS
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	TWED
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	31:28	XNX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	SpecSEI
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	PAN
+	0b0000	NI
+	0b0001	IMP
+	0b0010	PAN2
+	0b0011	PAN3
+EndEnum
+UnsignedEnum	19:16	LO
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	HPDS
+	0b0000	NI
+	0b0001	IMP
+	0b0010	HPDS2
+EndEnum
+UnsignedEnum	11:8	VH
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	7:4	VMIDBits
+	0b0000	8
+	0b0010	16
+EndEnum
+UnsignedEnum	3:0	HAFDBS
+	0b0000	NI
+	0b0001	AF
+	0b0010	DBM
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64MMFR2_EL1	3	0	0	7	2
+UnsignedEnum	63:60	E0PD
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	EVT
+	0b0000	NI
+	0b0001	IMP
+	0b0010	TTLBxS
+EndEnum
+UnsignedEnum	55:52	BBM
+	0b0000	0
+	0b0001	1
+	0b0010	2
+EndEnum
+UnsignedEnum	51:48	TTL
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Res0	47:44
+UnsignedEnum	43:40	FWB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	39:36	IDS
+	0b0000	0x0
+	0b0001	0x18
+EndEnum
+UnsignedEnum	35:32	AT
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+Enum	31:28	ST
+	0b0000	39
+	0b0001	48_47
+EndEnum
+UnsignedEnum	27:24	NV
+	0b0000	NI
+	0b0001	IMP
+	0b0010	NV2
+EndEnum
+Enum	23:20	CCIDX
+	0b0000	32
+	0b0001	64
+EndEnum
+Enum	19:16	VARange
+	0b0000	48
+	0b0001	52
+EndEnum
+UnsignedEnum	15:12	IESB
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	LSM
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	UAO
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	CnP
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg	ID_AA64MMFR3_EL1	3	0	0	7	3
+UnsignedEnum	63:60	Spec_FPACC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	59:56	ADERR
+	0b0000	NI
+	0b0001	DEV_ASYNC
+	0b0010	FEAT_ADERR
+	0b0011	FEAT_ADERR_IND
+EndEnum
+UnsignedEnum	55:52	SDERR
+	0b0000	NI
+	0b0001	DEV_SYNC
+	0b0010	FEAT_ADERR
+	0b0011	FEAT_ADERR_IND
+EndEnum
+Res0	51:48
+UnsignedEnum	47:44	ANERR
+	0b0000	NI
+	0b0001	ASYNC
+	0b0010	FEAT_ANERR
+	0b0011	FEAT_ANERR_IND
+EndEnum
+UnsignedEnum	43:40	SNERR
+	0b0000	NI
+	0b0001	SYNC
+	0b0010	FEAT_ANERR
+	0b0011	FEAT_ANERR_IND
+EndEnum
+UnsignedEnum	39:36	D128_2
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	35:32	D128
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	31:28	MEC
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	27:24	AIE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	23:20	S2POE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	19:16	S1POE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	15:12	S2PIE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	11:8	S1PIE
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	7:4	SCTLRX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+UnsignedEnum	3:0	TCRX
+	0b0000	NI
+	0b0001	IMP
+EndEnum
+EndSysreg
+
+Sysreg	SCTLR_EL1	3	0	1	0	0
+Field	63	TIDCP
+Field	62	SPINTMASK
+Field	61	NMI
+Field	60	EnTP2
+Res0	59:58
+Field	57	EPAN
+Field	56	EnALS
+Field	55	EnAS0
+Field	54	EnASR
+Field	53	TME
+Field	52	TME0
+Field	51	TMT
+Field	50	TMT0
+Field	49:46	TWEDEL
+Field	45	TWEDEn
+Field	44	DSSBS
+Field	43	ATA
+Field	42	ATA0
+Enum	41:40	TCF
+	0b00	NONE
+	0b01	SYNC
+	0b10	ASYNC
+	0b11	ASYMM
+EndEnum
+Enum	39:38	TCF0
+	0b00	NONE
+	0b01	SYNC
+	0b10	ASYNC
+	0b11	ASYMM
+EndEnum
+Field	37	ITFSB
+Field	36	BT1
+Field	35	BT0
+Res0	34
+Field	33	MSCEn
+Field	32	CMOW
+Field	31	EnIA
+Field	30	EnIB
+Field	29	LSMAOE
+Field	28	nTLSMD
+Field	27	EnDA
+Field	26	UCI
+Field	25	EE
+Field	24	E0E
+Field	23	SPAN
+Field	22	EIS
+Field	21	IESB
+Field	20	TSCXT
+Field	19	WXN
+Field	18	nTWE
+Res0	17
+Field	16	nTWI
+Field	15	UCT
+Field	14	DZE
+Field	13	EnDB
+Field	12	I
+Field	11	EOS
+Field	10	EnRCTX
+Field	9	UMA
+Field	8	SED
+Field	7	ITD
+Field	6	nAA
+Field	5	CP15BEN
+Field	4	SA0
+Field	3	SA
+Field	2	C
+Field	1	A
+Field	0	M
+EndSysreg
+
+SysregFields	CPACR_ELx
+Res0	63:29
+Field	28	TTA
+Res0	27:26
+Field	25:24	SMEN
+Res0	23:22
+Field	21:20	FPEN
+Res0	19:18
+Field	17:16	ZEN
+Res0	15:0
+EndSysregFields
+
+Sysreg	CPACR_EL1	3	0	1	0	2
+Fields	CPACR_ELx
+EndSysreg
+
+Sysreg	SMPRI_EL1	3	0	1	2	4
+Res0	63:4
+Field	3:0	PRIORITY
+EndSysreg
+
+SysregFields	ZCR_ELx
+Res0	63:9
+Raz	8:4
+Field	3:0	LEN
+EndSysregFields
+
+Sysreg ZCR_EL1	3	0	1	2	0
+Fields ZCR_ELx
+EndSysreg
+
+SysregFields	SMCR_ELx
+Res0	63:32
+Field	31	FA64
+Field	30	EZT0
+Res0	29:9
+Raz	8:4
+Field	3:0	LEN
+EndSysregFields
+
+Sysreg	SMCR_EL1	3	0	1	2	6
+Fields	SMCR_ELx
+EndSysreg
+
+Sysreg	ALLINT	3	0	4	3	0
+Res0	63:14
+Field	13	ALLINT
+Res0	12:0
+EndSysreg
+
+Sysreg	FAR_EL1	3	0	6	0	0
+Field	63:0	ADDR
+EndSysreg
+
+Sysreg	PMSCR_EL1	3	0	9	9	0
+Res0	63:8
+Field	7:6	PCT
+Field	5	TS
+Field	4	PA
+Field	3	CX
+Res0	2
+Field	1	E1SPE
+Field	0	E0SPE
+EndSysreg
+
+Sysreg	PMSNEVFR_EL1	3	0	9	9	1
+Field	63:0	E
+EndSysreg
+
+Sysreg	PMSICR_EL1	3	0	9	9	2
+Field	63:56	ECOUNT
+Res0	55:32
+Field	31:0	COUNT
+EndSysreg
+
+Sysreg	PMSIRR_EL1	3	0	9	9	3
+Res0	63:32
+Field	31:8	INTERVAL
+Res0	7:1
+Field	0	RND
+EndSysreg
+
+Sysreg	PMSFCR_EL1	3	0	9	9	4
+Res0	63:19
+Field	18	ST
+Field	17	LD
+Field	16	B
+Res0	15:4
+Field	3	FnE
+Field	2	FL
+Field	1	FT
+Field	0	FE
+EndSysreg
+
+Sysreg	PMSEVFR_EL1	3	0	9	9	5
+Field	63:0	E
+EndSysreg
+
+Sysreg	PMSLATFR_EL1	3	0	9	9	6
+Res0	63:16
+Field	15:0	MINLAT
+EndSysreg
+
+Sysreg	PMSIDR_EL1	3	0	9	9	7
+Res0	63:25
+Field	24	PBT
+Field	23:20	FORMAT
+Enum	19:16	COUNTSIZE
+	0b0010	12_BIT_SAT
+	0b0011	16_BIT_SAT
+EndEnum
+Field	15:12	MAXSIZE
+Enum	11:8	INTERVAL
+	0b0000	256
+	0b0010	512
+	0b0011	768
+	0b0100	1024
+	0b0101	1536
+	0b0110	2048
+	0b0111	3072
+	0b1000	4096
+EndEnum
+Res0	7
+Field	6	FnE
+Field	5	ERND
+Field	4	LDS
+Field	3	ARCHINST
+Field	2	FL
+Field	1	FT
+Field	0	FE
+EndSysreg
+
+Sysreg	PMBLIMITR_EL1	3	0	9	10	0
+Field	63:12	LIMIT
+Res0	11:6
+Field	5	PMFZ
+Res0	4:3
+Enum	2:1	FM
+	0b00	FILL
+	0b10	DISCARD
+EndEnum
+Field	0	E
+EndSysreg
+
+Sysreg	PMBPTR_EL1	3	0	9	10	1
+Field	63:0	PTR
+EndSysreg
+
+Sysreg	PMBSR_EL1	3	0	9	10	3
+Res0	63:32
+Enum	31:26	EC
+	0b000000	BUF
+	0b100100	FAULT_S1
+	0b100101	FAULT_S2
+	0b011110	FAULT_GPC
+	0b011111	IMP_DEF
+EndEnum
+Res0	25:20
+Field	19	DL
+Field	18	EA
+Field	17	S
+Field	16	COLL
+Field	15:0	MSS
+EndSysreg
+
+Sysreg	PMBIDR_EL1	3	0	9	10	7
+Res0	63:12
+Enum	11:8	EA
+	0b0000	NotDescribed
+	0b0001	Ignored
+	0b0010	SError
+EndEnum
+Res0	7:6
+Field	5	F
+Field	4	P
+Field	3:0	ALIGN
+EndSysreg
+
+SysregFields	CONTEXTIDR_ELx
+Res0	63:32
+Field	31:0	PROCID
+EndSysregFields
+
+Sysreg	CONTEXTIDR_EL1	3	0	13	0	1
+Fields	CONTEXTIDR_ELx
+EndSysreg
+
+Sysreg	TPIDR_EL1	3	0	13	0	4
+Field	63:0	ThreadID
+EndSysreg
+
+Sysreg	SCXTNUM_EL1	3	0	13	0	7
+Field	63:0	SoftwareContextNumber
+EndSysreg
+
+# The bit layout for CCSIDR_EL1 depends on whether FEAT_CCIDX is implemented.
+# The following is for case when FEAT_CCIDX is not implemented.
+Sysreg	CCSIDR_EL1	3	1	0	0	0
+Res0	63:32
+Unkn	31:28
+Field	27:13	NumSets
+Field	12:3	Associativity
+Field	2:0	LineSize
+EndSysreg
+
+Sysreg	CLIDR_EL1	3	1	0	0	1
+Res0	63:47
+Field	46:33	Ttypen
+Field	32:30	ICB
+Field	29:27	LoUU
+Field	26:24	LoC
+Field	23:21	LoUIS
+Field	20:18	Ctype7
+Field	17:15	Ctype6
+Field	14:12	Ctype5
+Field	11:9	Ctype4
+Field	8:6	Ctype3
+Field	5:3	Ctype2
+Field	2:0	Ctype1
+EndSysreg
+
+Sysreg	CCSIDR2_EL1	3	1	0	0	2
+Res0	63:24
+Field	23:0	NumSets
+EndSysreg
+
+Sysreg	GMID_EL1	3	1	0	0	4
+Res0	63:4
+Field	3:0	BS
+EndSysreg
+
+Sysreg	SMIDR_EL1	3	1	0	0	6
+Res0	63:32
+Field	31:24	IMPLEMENTER
+Field	23:16	REVISION
+Field	15	SMPS
+Res0	14:12
+Field	11:0	AFFINITY
+EndSysreg
+
+Sysreg	CSSELR_EL1	3	2	0	0	0
+Res0	63:5
+Field	4	TnD
+Field	3:1	Level
+Field	0	InD
+EndSysreg
+
+Sysreg	CTR_EL0	3	3	0	0	1
+Res0	63:38
+Field	37:32	TminLine
+Res1	31
+Res0	30
+Field	29	DIC
+Field	28	IDC
+Field	27:24	CWG
+Field	23:20	ERG
+Field	19:16	DminLine
+Enum	15:14	L1Ip
+	0b00	VPIPT
+	# This is named as AIVIVT in the ARM but documented as reserved
+	0b01	RESERVED
+	0b10	VIPT
+	0b11	PIPT
+EndEnum
+Res0	13:4
+Field	3:0	IminLine
+EndSysreg
+
+Sysreg	DCZID_EL0	3	3	0	0	7
+Res0	63:5
+Field	4	DZP
+Field	3:0	BS
+EndSysreg
+
+Sysreg	SVCR	3	3	4	2	2
+Res0	63:2
+Field	1	ZA
+Field	0	SM
+EndSysreg
+
+SysregFields	HFGxTR_EL2
+Field	63	nAMAIR2_EL1
+Field	62	nMAIR2_EL1
+Field	61	nS2POR_EL1
+Field	60	nPOR_EL1
+Field	59	nPOR_EL0
+Field	58	nPIR_EL1
+Field	57	nPIRE0_EL1
+Field	56	nRCWMASK_EL1
+Field	55	nTPIDR2_EL0
+Field	54	nSMPRI_EL1
+Field	53	nGCS_EL1
+Field	52	nGCS_EL0
+Res0	51
+Field	50	nACCDATA_EL1
+Field	49	ERXADDR_EL1
+Field	48	ERXPFGCDN_EL1
+Field	47	ERXPFGCTL_EL1
+Field	46	ERXPFGF_EL1
+Field	45	ERXMISCn_EL1
+Field	44	ERXSTATUS_EL1
+Field	43	ERXCTLR_EL1
+Field	42	ERXFR_EL1
+Field	41	ERRSELR_EL1
+Field	40	ERRIDR_EL1
+Field	39	ICC_IGRPENn_EL1
+Field	38	VBAR_EL1
+Field	37	TTBR1_EL1
+Field	36	TTBR0_EL1
+Field	35	TPIDR_EL0
+Field	34	TPIDRRO_EL0
+Field	33	TPIDR_EL1
+Field	32	TCR_EL1
+Field	31	SCXTNUM_EL0
+Field	30	SCXTNUM_EL1
+Field	29	SCTLR_EL1
+Field	28	REVIDR_EL1
+Field	27	PAR_EL1
+Field	26	MPIDR_EL1
+Field	25	MIDR_EL1
+Field	24	MAIR_EL1
+Field	23	LORSA_EL1
+Field	22	LORN_EL1
+Field	21	LORID_EL1
+Field	20	LOREA_EL1
+Field	19	LORC_EL1
+Field	18	ISR_EL1
+Field	17	FAR_EL1
+Field	16	ESR_EL1
+Field	15	DCZID_EL0
+Field	14	CTR_EL0
+Field	13	CSSELR_EL1
+Field	12	CPACR_EL1
+Field	11	CONTEXTIDR_EL1
+Field	10	CLIDR_EL1
+Field	9	CCSIDR_EL1
+Field	8	APIBKey
+Field	7	APIAKey
+Field	6	APGAKey
+Field	5	APDBKey
+Field	4	APDAKey
+Field	3	AMAIR_EL1
+Field	2	AIDR_EL1
+Field	1	AFSR1_EL1
+Field	0	AFSR0_EL1
+EndSysregFields
+
+Sysreg HFGRTR_EL2	3	4	1	1	4
+Fields	HFGxTR_EL2
+EndSysreg
+
+Sysreg HFGWTR_EL2	3	4	1	1	5
+Fields	HFGxTR_EL2
+EndSysreg
+
+Sysreg HFGITR_EL2	3	4	1	1	6
+Res0	63:61
+Field	60	COSPRCTX
+Field	59	nGCSEPP
+Field	58	nGCSSTR_EL1
+Field	57	nGCSPUSHM_EL1
+Field	56	nBRBIALL
+Field	55	nBRBINJ
+Field	54	DCCVAC
+Field	53	SVC_EL1
+Field	52	SVC_EL0
+Field	51	ERET
+Field	50	CPPRCTX
+Field	49	DVPRCTX
+Field	48	CFPRCTX
+Field	47	TLBIVAALE1
+Field	46	TLBIVALE1
+Field	45	TLBIVAAE1
+Field	44	TLBIASIDE1
+Field	43	TLBIVAE1
+Field	42	TLBIVMALLE1
+Field	41	TLBIRVAALE1
+Field	40	TLBIRVALE1
+Field	39	TLBIRVAAE1
+Field	38	TLBIRVAE1
+Field	37	TLBIRVAALE1IS
+Field	36	TLBIRVALE1IS
+Field	35	TLBIRVAAE1IS
+Field	34	TLBIRVAE1IS
+Field	33	TLBIVAALE1IS
+Field	32	TLBIVALE1IS
+Field	31	TLBIVAAE1IS
+Field	30	TLBIASIDE1IS
+Field	29	TLBIVAE1IS
+Field	28	TLBIVMALLE1IS
+Field	27	TLBIRVAALE1OS
+Field	26	TLBIRVALE1OS
+Field	25	TLBIRVAAE1OS
+Field	24	TLBIRVAE1OS
+Field	23	TLBIVAALE1OS
+Field	22	TLBIVALE1OS
+Field	21	TLBIVAAE1OS
+Field	20	TLBIASIDE1OS
+Field	19	TLBIVAE1OS
+Field	18	TLBIVMALLE1OS
+Field	17	ATS1E1WP
+Field	16	ATS1E1RP
+Field	15	ATS1E0W
+Field	14	ATS1E0R
+Field	13	ATS1E1W
+Field	12	ATS1E1R
+Field	11	DCZVA
+Field	10	DCCIVAC
+Field	9	DCCVADP
+Field	8	DCCVAP
+Field	7	DCCVAU
+Field	6	DCCISW
+Field	5	DCCSW
+Field	4	DCISW
+Field	3	DCIVAC
+Field	2	ICIVAU
+Field	1	ICIALLU
+Field	0	ICIALLUIS
+EndSysreg
+
+Sysreg HDFGRTR_EL2	3	4	3	1	4
+Field	63	PMBIDR_EL1
+Field	62	nPMSNEVFR_EL1
+Field	61	nBRBDATA
+Field	60	nBRBCTL
+Field	59	nBRBIDR
+Field	58	PMCEIDn_EL0
+Field	57	PMUSERENR_EL0
+Field	56	TRBTRG_EL1
+Field	55	TRBSR_EL1
+Field	54	TRBPTR_EL1
+Field	53	TRBMAR_EL1
+Field	52	TRBLIMITR_EL1
+Field	51	TRBIDR_EL1
+Field	50	TRBBASER_EL1
+Res0	49
+Field	48	TRCVICTLR
+Field	47	TRCSTATR
+Field	46	TRCSSCSRn
+Field	45	TRCSEQSTR
+Field	44	TRCPRGCTLR
+Field	43	TRCOSLSR
+Res0	42
+Field	41	TRCIMSPECn
+Field	40	TRCID
+Res0	39:38
+Field	37	TRCCNTVRn
+Field	36	TRCCLAIM
+Field	35	TRCAUXCTLR
+Field	34	TRCAUTHSTATUS
+Field	33	TRC
+Field	32	PMSLATFR_EL1
+Field	31	PMSIRR_EL1
+Field	30	PMSIDR_EL1
+Field	29	PMSICR_EL1
+Field	28	PMSFCR_EL1
+Field	27	PMSEVFR_EL1
+Field	26	PMSCR_EL1
+Field	25	PMBSR_EL1
+Field	24	PMBPTR_EL1
+Field	23	PMBLIMITR_EL1
+Field	22	PMMIR_EL1
+Res0	21:20
+Field	19	PMSELR_EL0
+Field	18	PMOVS
+Field	17	PMINTEN
+Field	16	PMCNTEN
+Field	15	PMCCNTR_EL0
+Field	14	PMCCFILTR_EL0
+Field	13	PMEVTYPERn_EL0
+Field	12	PMEVCNTRn_EL0
+Field	11	OSDLR_EL1
+Field	10	OSECCR_EL1
+Field	9	OSLSR_EL1
+Res0	8
+Field	7	DBGPRCR_EL1
+Field	6	DBGAUTHSTATUS_EL1
+Field	5	DBGCLAIM
+Field	4	MDSCR_EL1
+Field	3	DBGWVRn_EL1
+Field	2	DBGWCRn_EL1
+Field	1	DBGBVRn_EL1
+Field	0	DBGBCRn_EL1
+EndSysreg
+
+Sysreg HDFGWTR_EL2	3	4	3	1	5
+Res0	63
+Field	62	nPMSNEVFR_EL1
+Field	61	nBRBDATA
+Field	60	nBRBCTL
+Res0	59:58
+Field	57	PMUSERENR_EL0
+Field	56	TRBTRG_EL1
+Field	55	TRBSR_EL1
+Field	54	TRBPTR_EL1
+Field	53	TRBMAR_EL1
+Field	52	TRBLIMITR_EL1
+Res0	51
+Field	50	TRBBASER_EL1
+Field	49	TRFCR_EL1
+Field	48	TRCVICTLR
+Res0	47
+Field	46	TRCSSCSRn
+Field	45	TRCSEQSTR
+Field	44	TRCPRGCTLR
+Res0	43
+Field	42	TRCOSLAR
+Field	41	TRCIMSPECn
+Res0	40:38
+Field	37	TRCCNTVRn
+Field	36	TRCCLAIM
+Field	35	TRCAUXCTLR
+Res0	34
+Field	33	TRC
+Field	32	PMSLATFR_EL1
+Field	31	PMSIRR_EL1
+Res0	30
+Field	29	PMSICR_EL1
+Field	28	PMSFCR_EL1
+Field	27	PMSEVFR_EL1
+Field	26	PMSCR_EL1
+Field	25	PMBSR_EL1
+Field	24	PMBPTR_EL1
+Field	23	PMBLIMITR_EL1
+Res0	22
+Field	21	PMCR_EL0
+Field	20	PMSWINC_EL0
+Field	19	PMSELR_EL0
+Field	18	PMOVS
+Field	17	PMINTEN
+Field	16	PMCNTEN
+Field	15	PMCCNTR_EL0
+Field	14	PMCCFILTR_EL0
+Field	13	PMEVTYPERn_EL0
+Field	12	PMEVCNTRn_EL0
+Field	11	OSDLR_EL1
+Field	10	OSECCR_EL1
+Res0	9
+Field	8	OSLAR_EL1
+Field	7	DBGPRCR_EL1
+Res0	6
+Field	5	DBGCLAIM
+Field	4	MDSCR_EL1
+Field	3	DBGWVRn_EL1
+Field	2	DBGWCRn_EL1
+Field	1	DBGBVRn_EL1
+Field	0	DBGBCRn_EL1
+EndSysreg
+
+Sysreg	ZCR_EL2	3	4	1	2	0
+Fields	ZCR_ELx
+EndSysreg
+
+Sysreg	HCRX_EL2	3	4	1	2	2
+Res0	63:23
+Field	22	GCSEn
+Field	21	EnIDCP128
+Field	20	EnSDERR
+Field	19	TMEA
+Field	18	EnSNERR
+Field	17	D128En
+Field	16	PTTWI
+Field	15	SCTLR2En
+Field	14	TCR2En
+Res0	13:12
+Field	11	MSCEn
+Field	10	MCE2
+Field	9	CMOW
+Field	8	VFNMI
+Field	7	VINMI
+Field	6	TALLINT
+Field	5	SMPME
+Field	4	FGTnXS
+Field	3	FnXS
+Field	2	EnASR
+Field	1	EnALS
+Field	0	EnAS0
+EndSysreg
+
+Sysreg	SMPRIMAP_EL2	3	4	1	2	5
+Field	63:60	P15
+Field	59:56	P14
+Field	55:52	P13
+Field	51:48	P12
+Field	47:44	P11
+Field	43:40	P10
+Field	39:36	F9
+Field	35:32	P8
+Field	31:28	P7
+Field	27:24	P6
+Field	23:20	P5
+Field	19:16	P4
+Field	15:12	P3
+Field	11:8	P2
+Field	7:4	P1
+Field	3:0	P0
+EndSysreg
+
+Sysreg	SMCR_EL2	3	4	1	2	6
+Fields	SMCR_ELx
+EndSysreg
+
+Sysreg	DACR32_EL2	3	4	3	0	0
+Res0	63:32
+Field	31:30	D15
+Field	29:28	D14
+Field	27:26	D13
+Field	25:24	D12
+Field	23:22	D11
+Field	21:20	D10
+Field	19:18	D9
+Field	17:16	D8
+Field	15:14	D7
+Field	13:12	D6
+Field	11:10	D5
+Field	9:8	D4
+Field	7:6	D3
+Field	5:4	D2
+Field	3:2	D1
+Field	1:0	D0
+EndSysreg
+
+Sysreg	FAR_EL2	3	4	6	0	0
+Field	63:0	ADDR
+EndSysreg
+
+Sysreg	PMSCR_EL2	3	4	9	9	0
+Res0	63:8
+Enum	7:6	PCT
+	0b00	VIRT
+	0b01	PHYS
+	0b11	GUEST
+EndEnum
+Field	5	TS
+Field	4	PA
+Field	3	CX
+Res0	2
+Field	1	E2SPE
+Field	0	E0HSPE
+EndSysreg
+
+Sysreg	CONTEXTIDR_EL2	3	4	13	0	1
+Fields	CONTEXTIDR_ELx
+EndSysreg
+
+Sysreg	CNTPOFF_EL2	3	4	14	0	6
+Field	63:0	PhysicalOffset
+EndSysreg
+
+Sysreg	CPACR_EL12	3	5	1	0	2
+Fields	CPACR_ELx
+EndSysreg
+
+Sysreg	ZCR_EL12	3	5	1	2	0
+Fields	ZCR_ELx
+EndSysreg
+
+Sysreg	SMCR_EL12	3	5	1	2	6
+Fields	SMCR_ELx
+EndSysreg
+
+Sysreg	FAR_EL12	3	5	6	0	0
+Field	63:0	ADDR
+EndSysreg
+
+Sysreg	CONTEXTIDR_EL12	3	5	13	0	1
+Fields	CONTEXTIDR_ELx
+EndSysreg
+
+SysregFields TTBRx_EL1
+Field	63:48	ASID
+Field	47:1	BADDR
+Field	0	CnP
+EndSysregFields
+
+Sysreg	TTBR0_EL1	3	0	2	0	0
+Fields	TTBRx_EL1
+EndSysreg
+
+Sysreg	TTBR1_EL1	3	0	2	0	1
+Fields	TTBRx_EL1
+EndSysreg
+
+SysregFields	TCR2_EL1x
+Res0	63:16
+Field	15	DisCH1
+Field	14	DisCH0
+Res0	13:12
+Field	11	HAFT
+Field	10	PTTWI
+Res0	9:6
+Field	5	D128
+Field	4	AIE
+Field	3	POE
+Field	2	E0POE
+Field	1	PIE
+Field	0	PnCH
+EndSysregFields
+
+Sysreg	TCR2_EL1	3	0	2	0	3
+Fields	TCR2_EL1x
+EndSysreg
+
+Sysreg	TCR2_EL12	3	5	2	0	3
+Fields	TCR2_EL1x
+EndSysreg
+
+Sysreg	TCR2_EL2	3	4	2	0	3
+Res0	63:16
+Field	15	DisCH1
+Field	14	DisCH0
+Field	13	AMEC1
+Field	12	AMEC0
+Field	11	HAFT
+Field	10	PTTWI
+Field	9:8	SKL1
+Field	7:6	SKL0
+Field	5	D128
+Field	4	AIE
+Field	3	POE
+Field	2	E0POE
+Field	1	PIE
+Field	0	PnCH
+EndSysreg
+
+SysregFields PIRx_ELx
+Field	63:60	Perm15
+Field	59:56	Perm14
+Field	55:52	Perm13
+Field	51:48	Perm12
+Field	47:44	Perm11
+Field	43:40	Perm10
+Field	39:36	Perm9
+Field	35:32	Perm8
+Field	31:28	Perm7
+Field	27:24	Perm6
+Field	23:20	Perm5
+Field	19:16	Perm4
+Field	15:12	Perm3
+Field	11:8	Perm2
+Field	7:4	Perm1
+Field	3:0	Perm0
+EndSysregFields
+
+Sysreg	PIRE0_EL1	3	0	10	2	2
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	PIRE0_EL12	3	5	10	2	2
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	PIR_EL1		3	0	10	2	3
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	PIR_EL12	3	5	10	2	3
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	PIR_EL2		3	4	10	2	3
+Fields	PIRx_ELx
+EndSysreg
+
+Sysreg	LORSA_EL1	3	0	10	4	0
+Res0	63:52
+Field	51:16	SA
+Res0	15:1
+Field	0	Valid
+EndSysreg
+
+Sysreg	LOREA_EL1	3	0	10	4	1
+Res0	63:52
+Field	51:48	EA_51_48
+Field	47:16	EA_47_16
+Res0	15:0
+EndSysreg
+
+Sysreg	LORN_EL1	3	0	10	4	2
+Res0	63:8
+Field	7:0	Num
+EndSysreg
+
+Sysreg	LORC_EL1	3	0	10	4	3
+Res0	63:10
+Field	9:2	DS
+Res0	1
+Field	0	EN
+EndSysreg
+
+Sysreg	LORID_EL1	3	0	10	4	7
+Res0	63:24
+Field	23:16	LD
+Res0	15:8
+Field	7:0	LR
+EndSysreg
+
+Sysreg	ISR_EL1	3	0	12	1	0
+Res0	63:11
+Field	10	IS
+Field	9	FS
+Field	8	A
+Field	7	I
+Field	6	F
+Res0	5:0
+EndSysreg
+
+Sysreg	ICC_NMIAR1_EL1	3	0	12	9	5
+Res0	63:24
+Field	23:0	INTID
+EndSysreg
+
+Sysreg	TRBLIMITR_EL1	3	0	9	11	0
+Field	63:12	LIMIT
+Res0	11:7
+Field	6	XE
+Field	5	nVM
+Enum	4:3	TM
+	0b00	STOP
+	0b01	IRQ
+	0b11	IGNR
+EndEnum
+Enum	2:1	FM
+	0b00	FILL
+	0b01	WRAP
+	0b11	CBUF
+EndEnum
+Field	0	E
+EndSysreg
+
+Sysreg	TRBPTR_EL1	3	0	9	11	1
+Field	63:0	PTR
+EndSysreg
+
+Sysreg	TRBBASER_EL1	3	0	9	11	2
+Field	63:12	BASE
+Res0	11:0
+EndSysreg
+
+Sysreg	TRBSR_EL1	3	0	9	11	3
+Res0	63:56
+Field	55:32	MSS2
+Field	31:26	EC
+Res0	25:24
+Field	23	DAT
+Field	22	IRQ
+Field	21	TRG
+Field	20	WRAP
+Res0	19
+Field	18	EA
+Field	17	S
+Res0	16
+Field	15:0	MSS
+EndSysreg
+
+Sysreg	TRBMAR_EL1	3	0	9	11	4
+Res0	63:12
+Enum	11:10	PAS
+	0b00	SECURE
+	0b01	NON_SECURE
+	0b10	ROOT
+	0b11	REALM
+EndEnum
+Enum	9:8	SH
+	0b00	NON_SHAREABLE
+	0b10	OUTER_SHAREABLE
+	0b11	INNER_SHAREABLE
+EndEnum
+Field	7:0	Attr
+EndSysreg
+
+Sysreg	TRBTRG_EL1	3	0	9	11	6
+Res0	63:32
+Field	31:0	TRG
+EndSysreg
+
+Sysreg	TRBIDR_EL1	3	0	9	11	7
+Res0	63:12
+Enum	11:8	EA
+	0b0000	NON_DESC
+	0b0001	IGNORE
+	0b0010	SERROR
+EndEnum
+Res0	7:6
+Field	5	F
+Field	4	P
+Field	3:0	Align
+EndSysreg
diff --git a/arch/arm64/xen/Makefile b/arch/arm64/xen/Makefile
new file mode 100644
index 000000000..b66215e86
--- /dev/null
+++ b/arch/arm64/xen/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+xen-arm-y	+= $(addprefix ../../arm/xen/, enlighten.o grant-table.o p2m.o mm.o)
+obj-y		:= xen-arm.o hypercall.o
diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S
new file mode 100644
index 000000000..9d0136169
--- /dev/null
+++ b/arch/arm64/xen/hypercall.S
@@ -0,0 +1,111 @@
+/******************************************************************************
+ * hypercall.S
+ *
+ * Xen hypercall wrappers
+ *
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>, Citrix, 2012
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+/*
+ * The Xen hypercall calling convention is very similar to the procedure
+ * call standard for the ARM 64-bit architecture: the first parameter is
+ * passed in x0, the second in x1, the third in x2, the fourth in x3 and
+ * the fifth in x4.
+ *
+ * The hypercall number is passed in x16.
+ *
+ * The return value is in x0.
+ *
+ * The hvc ISS is required to be 0xEA1, that is the Xen specific ARM
+ * hypercall tag.
+ *
+ * Parameter structs passed to hypercalls are laid out according to
+ * the ARM 64-bit EABI standard.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/asm-uaccess.h>
+#include <xen/interface/xen.h>
+
+
+#define XEN_IMM 0xEA1
+
+#define HYPERCALL_SIMPLE(hypercall)		\
+SYM_FUNC_START(HYPERVISOR_##hypercall)		\
+	mov x16, #__HYPERVISOR_##hypercall;	\
+	hvc XEN_IMM;				\
+	ret;					\
+SYM_FUNC_END(HYPERVISOR_##hypercall)
+
+#define HYPERCALL0 HYPERCALL_SIMPLE
+#define HYPERCALL1 HYPERCALL_SIMPLE
+#define HYPERCALL2 HYPERCALL_SIMPLE
+#define HYPERCALL3 HYPERCALL_SIMPLE
+#define HYPERCALL4 HYPERCALL_SIMPLE
+#define HYPERCALL5 HYPERCALL_SIMPLE
+
+                .text
+
+HYPERCALL2(xen_version);
+HYPERCALL3(console_io);
+HYPERCALL3(grant_table_op);
+HYPERCALL2(sched_op);
+HYPERCALL2(event_channel_op);
+HYPERCALL2(hvm_op);
+HYPERCALL2(memory_op);
+HYPERCALL2(physdev_op);
+HYPERCALL3(vcpu_op);
+HYPERCALL1(platform_op_raw);
+HYPERCALL2(multicall);
+HYPERCALL2(vm_assist);
+HYPERCALL3(dm_op);
+
+SYM_FUNC_START(privcmd_call)
+	mov x16, x0
+	mov x0, x1
+	mov x1, x2
+	mov x2, x3
+	mov x3, x4
+	mov x4, x5
+	/*
+	 * Privcmd calls are issued by the userspace. The kernel needs to
+	 * enable access to TTBR0_EL1 as the hypervisor would issue stage 1
+	 * translations to user memory via AT instructions. Since AT
+	 * instructions are not affected by the PAN bit (ARMv8.1), we only
+	 * need the explicit uaccess_enable/disable if the TTBR0 PAN emulation
+	 * is enabled (it implies that hardware UAO and PAN disabled).
+	 */
+	uaccess_ttbr0_enable x6, x7, x8
+	hvc XEN_IMM
+
+	/*
+	 * Disable userspace access from kernel once the hyp call completed.
+	 */
+	uaccess_ttbr0_disable x6, x7
+	ret
+SYM_FUNC_END(privcmd_call);